Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/i2c/chips/pcf8591.c b/drivers/i2c/chips/pcf8591.c
new file mode 100644
index 0000000..b6b927d
--- /dev/null
+++ b/drivers/i2c/chips/pcf8591.c
@@ -0,0 +1,316 @@
+/*
+ pcf8591.c - Part of lm_sensors, Linux kernel modules for hardware
+ monitoring
+ Copyright (C) 2001-2004 Aurelien Jarno <aurelien@aurel32.net>
+ Ported to Linux 2.6 by Aurelien Jarno <aurelien@aurel32.net> with
+ the help of Jean Delvare <khali@linux-fr.org>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
+ 0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_1(pcf8591);
+
+static int input_mode;
+module_param(input_mode, int, 0);
+MODULE_PARM_DESC(input_mode,
+ "Analog input mode:\n"
+ " 0 = four single ended inputs\n"
+ " 1 = three differential inputs\n"
+ " 2 = single ended and differential mixed\n"
+ " 3 = two differential inputs\n");
+
+/* The PCF8591 control byte
+ 7 6 5 4 3 2 1 0
+ | 0 |AOEF| AIP | 0 |AINC| AICH | */
+
+/* Analog Output Enable Flag (analog output active if 1) */
+#define PCF8591_CONTROL_AOEF 0x40
+
+/* Analog Input Programming
+ 0x00 = four single ended inputs
+ 0x10 = three differential inputs
+ 0x20 = single ended and differential mixed
+ 0x30 = two differential inputs */
+#define PCF8591_CONTROL_AIP_MASK 0x30
+
+/* Autoincrement Flag (switch on if 1) */
+#define PCF8591_CONTROL_AINC 0x04
+
+/* Channel selection
+ 0x00 = channel 0
+ 0x01 = channel 1
+ 0x02 = channel 2
+ 0x03 = channel 3 */
+#define PCF8591_CONTROL_AICH_MASK 0x03
+
+/* Initial values */
+#define PCF8591_INIT_CONTROL ((input_mode << 4) | PCF8591_CONTROL_AOEF)
+#define PCF8591_INIT_AOUT 0 /* DAC out = 0 */
+
+/* Conversions */
+#define REG_TO_SIGNED(reg) (((reg) & 0x80)?((reg) - 256):(reg))
+
+struct pcf8591_data {
+ struct i2c_client client;
+ struct semaphore update_lock;
+
+ u8 control;
+ u8 aout;
+};
+
+static int pcf8591_attach_adapter(struct i2c_adapter *adapter);
+static int pcf8591_detect(struct i2c_adapter *adapter, int address, int kind);
+static int pcf8591_detach_client(struct i2c_client *client);
+static void pcf8591_init_client(struct i2c_client *client);
+static int pcf8591_read_channel(struct device *dev, int channel);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver pcf8591_driver = {
+ .owner = THIS_MODULE,
+ .name = "pcf8591",
+ .id = I2C_DRIVERID_PCF8591,
+ .flags = I2C_DF_NOTIFY,
+ .attach_adapter = pcf8591_attach_adapter,
+ .detach_client = pcf8591_detach_client,
+};
+
+/* following are the sysfs callback functions */
+#define show_in_channel(channel) \
+static ssize_t show_in##channel##_input(struct device *dev, char *buf) \
+{ \
+ return sprintf(buf, "%d\n", pcf8591_read_channel(dev, channel));\
+} \
+static DEVICE_ATTR(in##channel##_input, S_IRUGO, \
+ show_in##channel##_input, NULL);
+
+show_in_channel(0);
+show_in_channel(1);
+show_in_channel(2);
+show_in_channel(3);
+
+static ssize_t show_out0_ouput(struct device *dev, char *buf)
+{
+ struct pcf8591_data *data = i2c_get_clientdata(to_i2c_client(dev));
+ return sprintf(buf, "%d\n", data->aout * 10);
+}
+
+static ssize_t set_out0_output(struct device *dev, const char *buf, size_t count)
+{
+ unsigned int value;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct pcf8591_data *data = i2c_get_clientdata(client);
+ if ((value = (simple_strtoul(buf, NULL, 10) + 5) / 10) <= 255) {
+ data->aout = value;
+ i2c_smbus_write_byte_data(client, data->control, data->aout);
+ return count;
+ }
+ return -EINVAL;
+}
+
+static DEVICE_ATTR(out0_output, S_IWUSR | S_IRUGO,
+ show_out0_ouput, set_out0_output);
+
+static ssize_t show_out0_enable(struct device *dev, char *buf)
+{
+ struct pcf8591_data *data = i2c_get_clientdata(to_i2c_client(dev));
+ return sprintf(buf, "%u\n", !(!(data->control & PCF8591_CONTROL_AOEF)));
+}
+
+static ssize_t set_out0_enable(struct device *dev, const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct pcf8591_data *data = i2c_get_clientdata(client);
+ unsigned long val = simple_strtoul(buf, NULL, 10);
+
+ down(&data->update_lock);
+ if (val)
+ data->control |= PCF8591_CONTROL_AOEF;
+ else
+ data->control &= ~PCF8591_CONTROL_AOEF;
+ i2c_smbus_write_byte(client, data->control);
+ up(&data->update_lock);
+ return count;
+}
+
+static DEVICE_ATTR(out0_enable, S_IWUSR | S_IRUGO,
+ show_out0_enable, set_out0_enable);
+
+/*
+ * Real code
+ */
+static int pcf8591_attach_adapter(struct i2c_adapter *adapter)
+{
+ return i2c_detect(adapter, &addr_data, pcf8591_detect);
+}
+
+/* This function is called by i2c_detect */
+int pcf8591_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+ struct i2c_client *new_client;
+ struct pcf8591_data *data;
+ int err = 0;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE
+ | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
+ goto exit;
+
+ /* OK. For now, we presume we have a valid client. We now create the
+ client structure, even though we cannot fill it completely yet. */
+ if (!(data = kmalloc(sizeof(struct pcf8591_data), GFP_KERNEL))) {
+ err = -ENOMEM;
+ goto exit;
+ }
+ memset(data, 0, sizeof(struct pcf8591_data));
+
+ new_client = &data->client;
+ i2c_set_clientdata(new_client, data);
+ new_client->addr = address;
+ new_client->adapter = adapter;
+ new_client->driver = &pcf8591_driver;
+ new_client->flags = 0;
+
+ /* Now, we would do the remaining detection. But the PCF8591 is plainly
+ impossible to detect! Stupid chip. */
+
+ /* Determine the chip type - only one kind supported! */
+ if (kind <= 0)
+ kind = pcf8591;
+
+ /* Fill in the remaining client fields and put it into the global
+ list */
+ strlcpy(new_client->name, "pcf8591", I2C_NAME_SIZE);
+ init_MUTEX(&data->update_lock);
+
+ /* Tell the I2C layer a new client has arrived */
+ if ((err = i2c_attach_client(new_client)))
+ goto exit_kfree;
+
+ /* Initialize the PCF8591 chip */
+ pcf8591_init_client(new_client);
+
+ /* Register sysfs hooks */
+ device_create_file(&new_client->dev, &dev_attr_out0_enable);
+ device_create_file(&new_client->dev, &dev_attr_out0_output);
+ device_create_file(&new_client->dev, &dev_attr_in0_input);
+ device_create_file(&new_client->dev, &dev_attr_in1_input);
+
+ /* Register input2 if not in "two differential inputs" mode */
+ if (input_mode != 3 )
+ device_create_file(&new_client->dev, &dev_attr_in2_input);
+
+ /* Register input3 only in "four single ended inputs" mode */
+ if (input_mode == 0)
+ device_create_file(&new_client->dev, &dev_attr_in3_input);
+
+ return 0;
+
+ /* OK, this is not exactly good programming practice, usually. But it is
+ very code-efficient in this case. */
+
+exit_kfree:
+ kfree(data);
+exit:
+ return err;
+}
+
+static int pcf8591_detach_client(struct i2c_client *client)
+{
+ int err;
+
+ if ((err = i2c_detach_client(client))) {
+ dev_err(&client->dev,
+ "Client deregistration failed, client not detached.\n");
+ return err;
+ }
+
+ kfree(i2c_get_clientdata(client));
+ return 0;
+}
+
+/* Called when we have found a new PCF8591. */
+static void pcf8591_init_client(struct i2c_client *client)
+{
+ struct pcf8591_data *data = i2c_get_clientdata(client);
+ data->control = PCF8591_INIT_CONTROL;
+ data->aout = PCF8591_INIT_AOUT;
+
+ i2c_smbus_write_byte_data(client, data->control, data->aout);
+
+ /* The first byte transmitted contains the conversion code of the
+ previous read cycle. FLUSH IT! */
+ i2c_smbus_read_byte(client);
+}
+
+static int pcf8591_read_channel(struct device *dev, int channel)
+{
+ u8 value;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct pcf8591_data *data = i2c_get_clientdata(client);
+
+ down(&data->update_lock);
+
+ if ((data->control & PCF8591_CONTROL_AICH_MASK) != channel) {
+ data->control = (data->control & ~PCF8591_CONTROL_AICH_MASK)
+ | channel;
+ i2c_smbus_write_byte(client, data->control);
+
+ /* The first byte transmitted contains the conversion code of
+ the previous read cycle. FLUSH IT! */
+ i2c_smbus_read_byte(client);
+ }
+ value = i2c_smbus_read_byte(client);
+
+ up(&data->update_lock);
+
+ if ((channel == 2 && input_mode == 2) ||
+ (channel != 3 && (input_mode == 1 || input_mode == 3)))
+ return (10 * REG_TO_SIGNED(value));
+ else
+ return (10 * value);
+}
+
+static int __init pcf8591_init(void)
+{
+ if (input_mode < 0 || input_mode > 3) {
+ printk(KERN_WARNING "pcf8591: invalid input_mode (%d)\n",
+ input_mode);
+ input_mode = 0;
+ }
+ return i2c_add_driver(&pcf8591_driver);
+}
+
+static void __exit pcf8591_exit(void)
+{
+ i2c_del_driver(&pcf8591_driver);
+}
+
+MODULE_AUTHOR("Aurelien Jarno <aurelien@aurel32.net>");
+MODULE_DESCRIPTION("PCF8591 driver");
+MODULE_LICENSE("GPL");
+
+module_init(pcf8591_init);
+module_exit(pcf8591_exit);