Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/net/gianfar_phy.h b/drivers/net/gianfar_phy.h
new file mode 100644
index 0000000..1e9b3ab
--- /dev/null
+++ b/drivers/net/gianfar_phy.h
@@ -0,0 +1,213 @@
+/*
+ * drivers/net/gianfar_phy.h
+ *
+ * Gianfar Ethernet Driver -- PHY handling
+ * Driver for FEC on MPC8540 and TSEC on MPC8540/MPC8560
+ * Based on 8260_io/fcc_enet.c
+ *
+ * Author: Andy Fleming
+ * Maintainer: Kumar Gala (kumar.gala@freescale.com)
+ *
+ * Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#ifndef __GIANFAR_PHY_H
+#define __GIANFAR_PHY_H
+
+#define MII_end ((u32)-2)
+#define MII_read ((u32)-1)
+
+#define MIIMIND_BUSY 0x00000001
+#define MIIMIND_NOTVALID 0x00000004
+
+#define GFAR_AN_TIMEOUT 2000
+
+/* 1000BT control (Marvell & BCM54xx at least) */
+#define MII_1000BASETCONTROL 0x09
+#define MII_1000BASETCONTROL_FULLDUPLEXCAP 0x0200
+#define MII_1000BASETCONTROL_HALFDUPLEXCAP 0x0100
+
+/* Cicada Extended Control Register 1 */
+#define MII_CIS8201_EXT_CON1 0x17
+#define MII_CIS8201_EXTCON1_INIT 0x0000
+
+/* Cicada Interrupt Mask Register */
+#define MII_CIS8201_IMASK 0x19
+#define MII_CIS8201_IMASK_IEN 0x8000
+#define MII_CIS8201_IMASK_SPEED 0x4000
+#define MII_CIS8201_IMASK_LINK 0x2000
+#define MII_CIS8201_IMASK_DUPLEX 0x1000
+#define MII_CIS8201_IMASK_MASK 0xf000
+
+/* Cicada Interrupt Status Register */
+#define MII_CIS8201_ISTAT 0x1a
+#define MII_CIS8201_ISTAT_STATUS 0x8000
+#define MII_CIS8201_ISTAT_SPEED 0x4000
+#define MII_CIS8201_ISTAT_LINK 0x2000
+#define MII_CIS8201_ISTAT_DUPLEX 0x1000
+
+/* Cicada Auxiliary Control/Status Register */
+#define MII_CIS8201_AUX_CONSTAT 0x1c
+#define MII_CIS8201_AUXCONSTAT_INIT 0x0004
+#define MII_CIS8201_AUXCONSTAT_DUPLEX 0x0020
+#define MII_CIS8201_AUXCONSTAT_SPEED 0x0018
+#define MII_CIS8201_AUXCONSTAT_GBIT 0x0010
+#define MII_CIS8201_AUXCONSTAT_100 0x0008
+
+/* 88E1011 PHY Status Register */
+#define MII_M1011_PHY_SPEC_STATUS 0x11
+#define MII_M1011_PHY_SPEC_STATUS_1000 0x8000
+#define MII_M1011_PHY_SPEC_STATUS_100 0x4000
+#define MII_M1011_PHY_SPEC_STATUS_SPD_MASK 0xc000
+#define MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX 0x2000
+#define MII_M1011_PHY_SPEC_STATUS_RESOLVED 0x0800
+#define MII_M1011_PHY_SPEC_STATUS_LINK 0x0400
+
+#define MII_M1011_IEVENT 0x13
+#define MII_M1011_IEVENT_CLEAR 0x0000
+
+#define MII_M1011_IMASK 0x12
+#define MII_M1011_IMASK_INIT 0x6400
+#define MII_M1011_IMASK_CLEAR 0x0000
+
+#define MII_DM9161_SCR 0x10
+#define MII_DM9161_SCR_INIT 0x0610
+
+/* DM9161 Specified Configuration and Status Register */
+#define MII_DM9161_SCSR 0x11
+#define MII_DM9161_SCSR_100F 0x8000
+#define MII_DM9161_SCSR_100H 0x4000
+#define MII_DM9161_SCSR_10F 0x2000
+#define MII_DM9161_SCSR_10H 0x1000
+
+/* DM9161 Interrupt Register */
+#define MII_DM9161_INTR 0x15
+#define MII_DM9161_INTR_PEND 0x8000
+#define MII_DM9161_INTR_DPLX_MASK 0x0800
+#define MII_DM9161_INTR_SPD_MASK 0x0400
+#define MII_DM9161_INTR_LINK_MASK 0x0200
+#define MII_DM9161_INTR_MASK 0x0100
+#define MII_DM9161_INTR_DPLX_CHANGE 0x0010
+#define MII_DM9161_INTR_SPD_CHANGE 0x0008
+#define MII_DM9161_INTR_LINK_CHANGE 0x0004
+#define MII_DM9161_INTR_INIT 0x0000
+#define MII_DM9161_INTR_STOP \
+(MII_DM9161_INTR_DPLX_MASK | MII_DM9161_INTR_SPD_MASK \
+ | MII_DM9161_INTR_LINK_MASK | MII_DM9161_INTR_MASK)
+
+/* DM9161 10BT Configuration/Status */
+#define MII_DM9161_10BTCSR 0x12
+#define MII_DM9161_10BTCSR_INIT 0x7800
+
+#define MII_BASIC_FEATURES (SUPPORTED_10baseT_Half | \
+ SUPPORTED_10baseT_Full | \
+ SUPPORTED_100baseT_Half | \
+ SUPPORTED_100baseT_Full | \
+ SUPPORTED_Autoneg | \
+ SUPPORTED_TP | \
+ SUPPORTED_MII)
+
+#define MII_GBIT_FEATURES (MII_BASIC_FEATURES | \
+ SUPPORTED_1000baseT_Half | \
+ SUPPORTED_1000baseT_Full)
+
+#define MII_READ_COMMAND 0x00000001
+
+#define MII_INTERRUPT_DISABLED 0x0
+#define MII_INTERRUPT_ENABLED 0x1
+/* Taken from mii_if_info and sungem_phy.h */
+struct gfar_mii_info {
+ /* Information about the PHY type */
+ /* And management functions */
+ struct phy_info *phyinfo;
+
+ /* forced speed & duplex (no autoneg)
+ * partner speed & duplex & pause (autoneg)
+ */
+ int speed;
+ int duplex;
+ int pause;
+
+ /* The most recently read link state */
+ int link;
+
+ /* Enabled Interrupts */
+ u32 interrupts;
+
+ u32 advertising;
+ int autoneg;
+ int mii_id;
+
+ /* private data pointer */
+ /* For use by PHYs to maintain extra state */
+ void *priv;
+
+ /* Provided by host chip */
+ struct net_device *dev;
+
+ /* A lock to ensure that only one thing can read/write
+ * the MDIO bus at a time */
+ spinlock_t mdio_lock;
+
+ /* Provided by ethernet driver */
+ int (*mdio_read) (struct net_device *dev, int mii_id, int reg);
+ void (*mdio_write) (struct net_device *dev, int mii_id, int reg, int val);
+};
+
+/* struct phy_info: a structure which defines attributes for a PHY
+ *
+ * id will contain a number which represents the PHY. During
+ * startup, the driver will poll the PHY to find out what its
+ * UID--as defined by registers 2 and 3--is. The 32-bit result
+ * gotten from the PHY will be ANDed with phy_id_mask to
+ * discard any bits which may change based on revision numbers
+ * unimportant to functionality
+ *
+ * There are 6 commands which take a gfar_mii_info structure.
+ * Each PHY must declare config_aneg, and read_status.
+ */
+struct phy_info {
+ u32 phy_id;
+ char *name;
+ unsigned int phy_id_mask;
+ u32 features;
+
+ /* Called to initialize the PHY */
+ int (*init)(struct gfar_mii_info *mii_info);
+
+ /* Called to suspend the PHY for power */
+ int (*suspend)(struct gfar_mii_info *mii_info);
+
+ /* Reconfigures autonegotiation (or disables it) */
+ int (*config_aneg)(struct gfar_mii_info *mii_info);
+
+ /* Determines the negotiated speed and duplex */
+ int (*read_status)(struct gfar_mii_info *mii_info);
+
+ /* Clears any pending interrupts */
+ int (*ack_interrupt)(struct gfar_mii_info *mii_info);
+
+ /* Enables or disables interrupts */
+ int (*config_intr)(struct gfar_mii_info *mii_info);
+
+ /* Clears up any memory if needed */
+ void (*close)(struct gfar_mii_info *mii_info);
+};
+
+struct phy_info *get_phy_info(struct gfar_mii_info *mii_info);
+int read_phy_reg(struct net_device *dev, int mii_id, int regnum);
+void write_phy_reg(struct net_device *dev, int mii_id, int regnum, int value);
+void mii_clear_phy_interrupt(struct gfar_mii_info *mii_info);
+void mii_configure_phy_interrupt(struct gfar_mii_info *mii_info, u32 interrupts);
+
+struct dm9161_private {
+ struct timer_list timer;
+ int resetdone;
+};
+
+#endif /* GIANFAR_PHY_H */