Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c
new file mode 100644
index 0000000..82ea68b
--- /dev/null
+++ b/drivers/parisc/sba_iommu.c
@@ -0,0 +1,2165 @@
+/*
+** System Bus Adapter (SBA) I/O MMU manager
+**
+** (c) Copyright 2000-2004 Grant Grundler <grundler @ parisc-linux x org>
+** (c) Copyright 2004 Naresh Kumar Inna <knaresh at india x hp x com>
+** (c) Copyright 2000-2004 Hewlett-Packard Company
+**
+** Portions (c) 1999 Dave S. Miller (from sparc64 I/O MMU code)
+**
+** This program is free software; you can redistribute it and/or modify
+** it under the terms of the GNU General Public License as published by
+** the Free Software Foundation; either version 2 of the License, or
+** (at your option) any later version.
+**
+**
+** This module initializes the IOC (I/O Controller) found on B1000/C3000/
+** J5000/J7000/N-class/L-class machines and their successors.
+**
+** FIXME: add DMA hint support programming in both sba and lba modules.
+*/
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/pci.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/dma.h> /* for DMA_CHUNK_SIZE */
+
+#include <asm/hardware.h> /* for register_parisc_driver() stuff */
+
+#include <linux/proc_fs.h>
+#include <asm/runway.h> /* for proc_runway_root */
+#include <asm/pdc.h> /* for PDC_MODEL_* */
+#include <asm/pdcpat.h> /* for is_pdc_pat() */
+#include <asm/parisc-device.h>
+
+
+/* declared in arch/parisc/kernel/setup.c */
+extern struct proc_dir_entry * proc_mckinley_root;
+
+#define MODULE_NAME "SBA"
+
+#ifdef CONFIG_PROC_FS
+/* depends on proc fs support. But costs CPU performance */
+#undef SBA_COLLECT_STATS
+#endif
+
+/*
+** The number of debug flags is a clue - this code is fragile.
+** Don't even think about messing with it unless you have
+** plenty of 710's to sacrifice to the computer gods. :^)
+*/
+#undef DEBUG_SBA_INIT
+#undef DEBUG_SBA_RUN
+#undef DEBUG_SBA_RUN_SG
+#undef DEBUG_SBA_RESOURCE
+#undef ASSERT_PDIR_SANITY
+#undef DEBUG_LARGE_SG_ENTRIES
+#undef DEBUG_DMB_TRAP
+
+#ifdef DEBUG_SBA_INIT
+#define DBG_INIT(x...) printk(x)
+#else
+#define DBG_INIT(x...)
+#endif
+
+#ifdef DEBUG_SBA_RUN
+#define DBG_RUN(x...) printk(x)
+#else
+#define DBG_RUN(x...)
+#endif
+
+#ifdef DEBUG_SBA_RUN_SG
+#define DBG_RUN_SG(x...) printk(x)
+#else
+#define DBG_RUN_SG(x...)
+#endif
+
+
+#ifdef DEBUG_SBA_RESOURCE
+#define DBG_RES(x...) printk(x)
+#else
+#define DBG_RES(x...)
+#endif
+
+#if defined(__LP64__) && !defined(CONFIG_PDC_NARROW)
+/* "low end" PA8800 machines use ZX1 chipset */
+#define ZX1_SUPPORT
+#endif
+
+#define SBA_INLINE __inline__
+
+
+/*
+** The number of pdir entries to "free" before issueing
+** a read to PCOM register to flush out PCOM writes.
+** Interacts with allocation granularity (ie 4 or 8 entries
+** allocated and free'd/purged at a time might make this
+** less interesting).
+*/
+#define DELAYED_RESOURCE_CNT 16
+
+#define DEFAULT_DMA_HINT_REG 0
+
+#define ASTRO_RUNWAY_PORT 0x582
+#define IKE_MERCED_PORT 0x803
+#define REO_MERCED_PORT 0x804
+#define REOG_MERCED_PORT 0x805
+#define PLUTO_MCKINLEY_PORT 0x880
+
+#define SBA_FUNC_ID 0x0000 /* function id */
+#define SBA_FCLASS 0x0008 /* function class, bist, header, rev... */
+
+#define IS_ASTRO(id) ((id)->hversion == ASTRO_RUNWAY_PORT)
+#define IS_IKE(id) ((id)->hversion == IKE_MERCED_PORT)
+#define IS_PLUTO(id) ((id)->hversion == PLUTO_MCKINLEY_PORT)
+
+#define SBA_FUNC_SIZE 4096 /* SBA configuration function reg set */
+
+#define ASTRO_IOC_OFFSET (32 * SBA_FUNC_SIZE)
+#define PLUTO_IOC_OFFSET (1 * SBA_FUNC_SIZE)
+/* Ike's IOC's occupy functions 2 and 3 */
+#define IKE_IOC_OFFSET(p) ((p+2) * SBA_FUNC_SIZE)
+
+#define IOC_CTRL 0x8 /* IOC_CTRL offset */
+#define IOC_CTRL_TC (1 << 0) /* TOC Enable */
+#define IOC_CTRL_CE (1 << 1) /* Coalesce Enable */
+#define IOC_CTRL_DE (1 << 2) /* Dillon Enable */
+#define IOC_CTRL_RM (1 << 8) /* Real Mode */
+#define IOC_CTRL_NC (1 << 9) /* Non Coherent Mode */
+#define IOC_CTRL_D4 (1 << 11) /* Disable 4-byte coalescing */
+#define IOC_CTRL_DD (1 << 13) /* Disable distr. LMMIO range coalescing */
+
+#define MAX_IOC 2 /* per Ike. Pluto/Astro only have 1. */
+
+#define ROPES_PER_IOC 8 /* per Ike half or Pluto/Astro */
+
+
+/*
+** Offsets into MBIB (Function 0 on Ike and hopefully Astro)
+** Firmware programs this stuff. Don't touch it.
+*/
+#define LMMIO_DIRECT0_BASE 0x300
+#define LMMIO_DIRECT0_MASK 0x308
+#define LMMIO_DIRECT0_ROUTE 0x310
+
+#define LMMIO_DIST_BASE 0x360
+#define LMMIO_DIST_MASK 0x368
+#define LMMIO_DIST_ROUTE 0x370
+
+#define IOS_DIST_BASE 0x390
+#define IOS_DIST_MASK 0x398
+#define IOS_DIST_ROUTE 0x3A0
+
+#define IOS_DIRECT_BASE 0x3C0
+#define IOS_DIRECT_MASK 0x3C8
+#define IOS_DIRECT_ROUTE 0x3D0
+
+/*
+** Offsets into I/O TLB (Function 2 and 3 on Ike)
+*/
+#define ROPE0_CTL 0x200 /* "regbus pci0" */
+#define ROPE1_CTL 0x208
+#define ROPE2_CTL 0x210
+#define ROPE3_CTL 0x218
+#define ROPE4_CTL 0x220
+#define ROPE5_CTL 0x228
+#define ROPE6_CTL 0x230
+#define ROPE7_CTL 0x238
+
+#define HF_ENABLE 0x40
+
+
+#define IOC_IBASE 0x300 /* IO TLB */
+#define IOC_IMASK 0x308
+#define IOC_PCOM 0x310
+#define IOC_TCNFG 0x318
+#define IOC_PDIR_BASE 0x320
+
+/* AGP GART driver looks for this */
+#define SBA_IOMMU_COOKIE 0x0000badbadc0ffeeUL
+
+
+/*
+** IOC supports 4/8/16/64KB page sizes (see TCNFG register)
+** It's safer (avoid memory corruption) to keep DMA page mappings
+** equivalently sized to VM PAGE_SIZE.
+**
+** We really can't avoid generating a new mapping for each
+** page since the Virtual Coherence Index has to be generated
+** and updated for each page.
+**
+** PAGE_SIZE could be greater than IOVP_SIZE. But not the inverse.
+*/
+#define IOVP_SIZE PAGE_SIZE
+#define IOVP_SHIFT PAGE_SHIFT
+#define IOVP_MASK PAGE_MASK
+
+#define SBA_PERF_CFG 0x708 /* Performance Counter stuff */
+#define SBA_PERF_MASK1 0x718
+#define SBA_PERF_MASK2 0x730
+
+
+/*
+** Offsets into PCI Performance Counters (functions 12 and 13)
+** Controlled by PERF registers in function 2 & 3 respectively.
+*/
+#define SBA_PERF_CNT1 0x200
+#define SBA_PERF_CNT2 0x208
+#define SBA_PERF_CNT3 0x210
+
+
+struct ioc {
+ void __iomem *ioc_hpa; /* I/O MMU base address */
+ char *res_map; /* resource map, bit == pdir entry */
+ u64 *pdir_base; /* physical base address */
+ unsigned long ibase; /* pdir IOV Space base - shared w/lba_pci */
+ unsigned long imask; /* pdir IOV Space mask - shared w/lba_pci */
+#ifdef ZX1_SUPPORT
+ unsigned long iovp_mask; /* help convert IOVA to IOVP */
+#endif
+ unsigned long *res_hint; /* next avail IOVP - circular search */
+ spinlock_t res_lock;
+ unsigned int res_bitshift; /* from the LEFT! */
+ unsigned int res_size; /* size of resource map in bytes */
+#if SBA_HINT_SUPPORT
+/* FIXME : DMA HINTs not used */
+ unsigned long hint_mask_pdir; /* bits used for DMA hints */
+ unsigned int hint_shift_pdir;
+#endif
+#if DELAYED_RESOURCE_CNT > 0
+ int saved_cnt;
+ struct sba_dma_pair {
+ dma_addr_t iova;
+ size_t size;
+ } saved[DELAYED_RESOURCE_CNT];
+#endif
+
+#ifdef SBA_COLLECT_STATS
+#define SBA_SEARCH_SAMPLE 0x100
+ unsigned long avg_search[SBA_SEARCH_SAMPLE];
+ unsigned long avg_idx; /* current index into avg_search */
+ unsigned long used_pages;
+ unsigned long msingle_calls;
+ unsigned long msingle_pages;
+ unsigned long msg_calls;
+ unsigned long msg_pages;
+ unsigned long usingle_calls;
+ unsigned long usingle_pages;
+ unsigned long usg_calls;
+ unsigned long usg_pages;
+#endif
+
+ /* STUFF We don't need in performance path */
+ unsigned int pdir_size; /* in bytes, determined by IOV Space size */
+};
+
+struct sba_device {
+ struct sba_device *next; /* list of SBA's in system */
+ struct parisc_device *dev; /* dev found in bus walk */
+ struct parisc_device_id *iodc; /* data about dev from firmware */
+ const char *name;
+ void __iomem *sba_hpa; /* base address */
+ spinlock_t sba_lock;
+ unsigned int flags; /* state/functionality enabled */
+ unsigned int hw_rev; /* HW revision of chip */
+
+ struct resource chip_resv; /* MMIO reserved for chip */
+ struct resource iommu_resv; /* MMIO reserved for iommu */
+
+ unsigned int num_ioc; /* number of on-board IOC's */
+ struct ioc ioc[MAX_IOC];
+};
+
+
+static struct sba_device *sba_list;
+
+static unsigned long ioc_needs_fdc = 0;
+
+/* global count of IOMMUs in the system */
+static unsigned int global_ioc_cnt = 0;
+
+/* PA8700 (Piranha 2.2) bug workaround */
+static unsigned long piranha_bad_128k = 0;
+
+/* Looks nice and keeps the compiler happy */
+#define SBA_DEV(d) ((struct sba_device *) (d))
+
+#if SBA_AGP_SUPPORT
+static int reserve_sba_gart = 1;
+#endif
+
+#define ROUNDUP(x,y) ((x + ((y)-1)) & ~((y)-1))
+
+
+/************************************
+** SBA register read and write support
+**
+** BE WARNED: register writes are posted.
+** (ie follow writes which must reach HW with a read)
+**
+** Superdome (in particular, REO) allows only 64-bit CSR accesses.
+*/
+#define READ_REG32(addr) le32_to_cpu(__raw_readl(addr))
+#define READ_REG64(addr) le64_to_cpu(__raw_readq(addr))
+#define WRITE_REG32(val, addr) __raw_writel(cpu_to_le32(val), addr)
+#define WRITE_REG64(val, addr) __raw_writeq(cpu_to_le64(val), addr)
+
+#ifdef __LP64__
+#define READ_REG(addr) READ_REG64(addr)
+#define WRITE_REG(value, addr) WRITE_REG64(value, addr)
+#else
+#define READ_REG(addr) READ_REG32(addr)
+#define WRITE_REG(value, addr) WRITE_REG32(value, addr)
+#endif
+
+#ifdef DEBUG_SBA_INIT
+
+/* NOTE: When __LP64__ isn't defined, READ_REG64() is two 32-bit reads */
+
+/**
+ * sba_dump_ranges - debugging only - print ranges assigned to this IOA
+ * @hpa: base address of the sba
+ *
+ * Print the MMIO and IO Port address ranges forwarded by an Astro/Ike/RIO
+ * IO Adapter (aka Bus Converter).
+ */
+static void
+sba_dump_ranges(void __iomem *hpa)
+{
+ DBG_INIT("SBA at 0x%p\n", hpa);
+ DBG_INIT("IOS_DIST_BASE : %Lx\n", READ_REG64(hpa+IOS_DIST_BASE));
+ DBG_INIT("IOS_DIST_MASK : %Lx\n", READ_REG64(hpa+IOS_DIST_MASK));
+ DBG_INIT("IOS_DIST_ROUTE : %Lx\n", READ_REG64(hpa+IOS_DIST_ROUTE));
+ DBG_INIT("\n");
+ DBG_INIT("IOS_DIRECT_BASE : %Lx\n", READ_REG64(hpa+IOS_DIRECT_BASE));
+ DBG_INIT("IOS_DIRECT_MASK : %Lx\n", READ_REG64(hpa+IOS_DIRECT_MASK));
+ DBG_INIT("IOS_DIRECT_ROUTE: %Lx\n", READ_REG64(hpa+IOS_DIRECT_ROUTE));
+}
+
+/**
+ * sba_dump_tlb - debugging only - print IOMMU operating parameters
+ * @hpa: base address of the IOMMU
+ *
+ * Print the size/location of the IO MMU PDIR.
+ */
+static void sba_dump_tlb(void __iomem *hpa)
+{
+ DBG_INIT("IO TLB at 0x%p\n", hpa);
+ DBG_INIT("IOC_IBASE : 0x%Lx\n", READ_REG64(hpa+IOC_IBASE));
+ DBG_INIT("IOC_IMASK : 0x%Lx\n", READ_REG64(hpa+IOC_IMASK));
+ DBG_INIT("IOC_TCNFG : 0x%Lx\n", READ_REG64(hpa+IOC_TCNFG));
+ DBG_INIT("IOC_PDIR_BASE: 0x%Lx\n", READ_REG64(hpa+IOC_PDIR_BASE));
+ DBG_INIT("\n");
+}
+#else
+#define sba_dump_ranges(x)
+#define sba_dump_tlb(x)
+#endif
+
+
+#ifdef ASSERT_PDIR_SANITY
+
+/**
+ * sba_dump_pdir_entry - debugging only - print one IOMMU PDIR entry
+ * @ioc: IO MMU structure which owns the pdir we are interested in.
+ * @msg: text to print ont the output line.
+ * @pide: pdir index.
+ *
+ * Print one entry of the IO MMU PDIR in human readable form.
+ */
+static void
+sba_dump_pdir_entry(struct ioc *ioc, char *msg, uint pide)
+{
+ /* start printing from lowest pde in rval */
+ u64 *ptr = &(ioc->pdir_base[pide & (~0U * BITS_PER_LONG)]);
+ unsigned long *rptr = (unsigned long *) &(ioc->res_map[(pide >>3) & ~(sizeof(unsigned long) - 1)]);
+ uint rcnt;
+
+ printk(KERN_DEBUG "SBA: %s rp %p bit %d rval 0x%lx\n",
+ msg,
+ rptr, pide & (BITS_PER_LONG - 1), *rptr);
+
+ rcnt = 0;
+ while (rcnt < BITS_PER_LONG) {
+ printk(KERN_DEBUG "%s %2d %p %016Lx\n",
+ (rcnt == (pide & (BITS_PER_LONG - 1)))
+ ? " -->" : " ",
+ rcnt, ptr, *ptr );
+ rcnt++;
+ ptr++;
+ }
+ printk(KERN_DEBUG "%s", msg);
+}
+
+
+/**
+ * sba_check_pdir - debugging only - consistency checker
+ * @ioc: IO MMU structure which owns the pdir we are interested in.
+ * @msg: text to print ont the output line.
+ *
+ * Verify the resource map and pdir state is consistent
+ */
+static int
+sba_check_pdir(struct ioc *ioc, char *msg)
+{
+ u32 *rptr_end = (u32 *) &(ioc->res_map[ioc->res_size]);
+ u32 *rptr = (u32 *) ioc->res_map; /* resource map ptr */
+ u64 *pptr = ioc->pdir_base; /* pdir ptr */
+ uint pide = 0;
+
+ while (rptr < rptr_end) {
+ u32 rval = *rptr;
+ int rcnt = 32; /* number of bits we might check */
+
+ while (rcnt) {
+ /* Get last byte and highest bit from that */
+ u32 pde = ((u32) (((char *)pptr)[7])) << 24;
+ if ((rval ^ pde) & 0x80000000)
+ {
+ /*
+ ** BUMMER! -- res_map != pdir --
+ ** Dump rval and matching pdir entries
+ */
+ sba_dump_pdir_entry(ioc, msg, pide);
+ return(1);
+ }
+ rcnt--;
+ rval <<= 1; /* try the next bit */
+ pptr++;
+ pide++;
+ }
+ rptr++; /* look at next word of res_map */
+ }
+ /* It'd be nice if we always got here :^) */
+ return 0;
+}
+
+
+/**
+ * sba_dump_sg - debugging only - print Scatter-Gather list
+ * @ioc: IO MMU structure which owns the pdir we are interested in.
+ * @startsg: head of the SG list
+ * @nents: number of entries in SG list
+ *
+ * print the SG list so we can verify it's correct by hand.
+ */
+static void
+sba_dump_sg( struct ioc *ioc, struct scatterlist *startsg, int nents)
+{
+ while (nents-- > 0) {
+ printk(KERN_DEBUG " %d : %08lx/%05x %p/%05x\n",
+ nents,
+ (unsigned long) sg_dma_address(startsg),
+ sg_dma_len(startsg),
+ sg_virt_addr(startsg), startsg->length);
+ startsg++;
+ }
+}
+
+#endif /* ASSERT_PDIR_SANITY */
+
+
+
+
+/**************************************************************
+*
+* I/O Pdir Resource Management
+*
+* Bits set in the resource map are in use.
+* Each bit can represent a number of pages.
+* LSbs represent lower addresses (IOVA's).
+*
+***************************************************************/
+#define PAGES_PER_RANGE 1 /* could increase this to 4 or 8 if needed */
+
+/* Convert from IOVP to IOVA and vice versa. */
+
+#ifdef ZX1_SUPPORT
+/* Pluto (aka ZX1) boxes need to set or clear the ibase bits appropriately */
+#define SBA_IOVA(ioc,iovp,offset,hint_reg) ((ioc->ibase) | (iovp) | (offset))
+#define SBA_IOVP(ioc,iova) ((iova) & (ioc)->iovp_mask)
+#else
+/* only support Astro and ancestors. Saves a few cycles in key places */
+#define SBA_IOVA(ioc,iovp,offset,hint_reg) ((iovp) | (offset))
+#define SBA_IOVP(ioc,iova) (iova)
+#endif
+
+#define PDIR_INDEX(iovp) ((iovp)>>IOVP_SHIFT)
+
+#define RESMAP_MASK(n) (~0UL << (BITS_PER_LONG - (n)))
+#define RESMAP_IDX_MASK (sizeof(unsigned long) - 1)
+
+
+/**
+ * sba_search_bitmap - find free space in IO PDIR resource bitmap
+ * @ioc: IO MMU structure which owns the pdir we are interested in.
+ * @bits_wanted: number of entries we need.
+ *
+ * Find consecutive free bits in resource bitmap.
+ * Each bit represents one entry in the IO Pdir.
+ * Cool perf optimization: search for log2(size) bits at a time.
+ */
+static SBA_INLINE unsigned long
+sba_search_bitmap(struct ioc *ioc, unsigned long bits_wanted)
+{
+ unsigned long *res_ptr = ioc->res_hint;
+ unsigned long *res_end = (unsigned long *) &(ioc->res_map[ioc->res_size]);
+ unsigned long pide = ~0UL;
+
+ if (bits_wanted > (BITS_PER_LONG/2)) {
+ /* Search word at a time - no mask needed */
+ for(; res_ptr < res_end; ++res_ptr) {
+ if (*res_ptr == 0) {
+ *res_ptr = RESMAP_MASK(bits_wanted);
+ pide = ((unsigned long)res_ptr - (unsigned long)ioc->res_map);
+ pide <<= 3; /* convert to bit address */
+ break;
+ }
+ }
+ /* point to the next word on next pass */
+ res_ptr++;
+ ioc->res_bitshift = 0;
+ } else {
+ /*
+ ** Search the resource bit map on well-aligned values.
+ ** "o" is the alignment.
+ ** We need the alignment to invalidate I/O TLB using
+ ** SBA HW features in the unmap path.
+ */
+ unsigned long o = 1 << get_order(bits_wanted << PAGE_SHIFT);
+ uint bitshiftcnt = ROUNDUP(ioc->res_bitshift, o);
+ unsigned long mask;
+
+ if (bitshiftcnt >= BITS_PER_LONG) {
+ bitshiftcnt = 0;
+ res_ptr++;
+ }
+ mask = RESMAP_MASK(bits_wanted) >> bitshiftcnt;
+
+ DBG_RES("%s() o %ld %p", __FUNCTION__, o, res_ptr);
+ while(res_ptr < res_end)
+ {
+ DBG_RES(" %p %lx %lx\n", res_ptr, mask, *res_ptr);
+ WARN_ON(mask == 0);
+ if(((*res_ptr) & mask) == 0) {
+ *res_ptr |= mask; /* mark resources busy! */
+ pide = ((unsigned long)res_ptr - (unsigned long)ioc->res_map);
+ pide <<= 3; /* convert to bit address */
+ pide += bitshiftcnt;
+ break;
+ }
+ mask >>= o;
+ bitshiftcnt += o;
+ if (mask == 0) {
+ mask = RESMAP_MASK(bits_wanted);
+ bitshiftcnt=0;
+ res_ptr++;
+ }
+ }
+ /* look in the same word on the next pass */
+ ioc->res_bitshift = bitshiftcnt + bits_wanted;
+ }
+
+ /* wrapped ? */
+ if (res_end <= res_ptr) {
+ ioc->res_hint = (unsigned long *) ioc->res_map;
+ ioc->res_bitshift = 0;
+ } else {
+ ioc->res_hint = res_ptr;
+ }
+ return (pide);
+}
+
+
+/**
+ * sba_alloc_range - find free bits and mark them in IO PDIR resource bitmap
+ * @ioc: IO MMU structure which owns the pdir we are interested in.
+ * @size: number of bytes to create a mapping for
+ *
+ * Given a size, find consecutive unmarked and then mark those bits in the
+ * resource bit map.
+ */
+static int
+sba_alloc_range(struct ioc *ioc, size_t size)
+{
+ unsigned int pages_needed = size >> IOVP_SHIFT;
+#ifdef SBA_COLLECT_STATS
+ unsigned long cr_start = mfctl(16);
+#endif
+ unsigned long pide;
+
+ pide = sba_search_bitmap(ioc, pages_needed);
+ if (pide >= (ioc->res_size << 3)) {
+ pide = sba_search_bitmap(ioc, pages_needed);
+ if (pide >= (ioc->res_size << 3))
+ panic("%s: I/O MMU @ %p is out of mapping resources\n",
+ __FILE__, ioc->ioc_hpa);
+ }
+
+#ifdef ASSERT_PDIR_SANITY
+ /* verify the first enable bit is clear */
+ if(0x00 != ((u8 *) ioc->pdir_base)[pide*sizeof(u64) + 7]) {
+ sba_dump_pdir_entry(ioc, "sba_search_bitmap() botched it?", pide);
+ }
+#endif
+
+ DBG_RES("%s(%x) %d -> %lx hint %x/%x\n",
+ __FUNCTION__, size, pages_needed, pide,
+ (uint) ((unsigned long) ioc->res_hint - (unsigned long) ioc->res_map),
+ ioc->res_bitshift );
+
+#ifdef SBA_COLLECT_STATS
+ {
+ unsigned long cr_end = mfctl(16);
+ unsigned long tmp = cr_end - cr_start;
+ /* check for roll over */
+ cr_start = (cr_end < cr_start) ? -(tmp) : (tmp);
+ }
+ ioc->avg_search[ioc->avg_idx++] = cr_start;
+ ioc->avg_idx &= SBA_SEARCH_SAMPLE - 1;
+
+ ioc->used_pages += pages_needed;
+#endif
+
+ return (pide);
+}
+
+
+/**
+ * sba_free_range - unmark bits in IO PDIR resource bitmap
+ * @ioc: IO MMU structure which owns the pdir we are interested in.
+ * @iova: IO virtual address which was previously allocated.
+ * @size: number of bytes to create a mapping for
+ *
+ * clear bits in the ioc's resource map
+ */
+static SBA_INLINE void
+sba_free_range(struct ioc *ioc, dma_addr_t iova, size_t size)
+{
+ unsigned long iovp = SBA_IOVP(ioc, iova);
+ unsigned int pide = PDIR_INDEX(iovp);
+ unsigned int ridx = pide >> 3; /* convert bit to byte address */
+ unsigned long *res_ptr = (unsigned long *) &((ioc)->res_map[ridx & ~RESMAP_IDX_MASK]);
+
+ int bits_not_wanted = size >> IOVP_SHIFT;
+
+ /* 3-bits "bit" address plus 2 (or 3) bits for "byte" == bit in word */
+ unsigned long m = RESMAP_MASK(bits_not_wanted) >> (pide & (BITS_PER_LONG - 1));
+
+ DBG_RES("%s( ,%x,%x) %x/%lx %x %p %lx\n",
+ __FUNCTION__, (uint) iova, size,
+ bits_not_wanted, m, pide, res_ptr, *res_ptr);
+
+#ifdef SBA_COLLECT_STATS
+ ioc->used_pages -= bits_not_wanted;
+#endif
+
+ *res_ptr &= ~m;
+}
+
+
+/**************************************************************
+*
+* "Dynamic DMA Mapping" support (aka "Coherent I/O")
+*
+***************************************************************/
+
+#if SBA_HINT_SUPPORT
+#define SBA_DMA_HINT(ioc, val) ((val) << (ioc)->hint_shift_pdir)
+#endif
+
+typedef unsigned long space_t;
+#define KERNEL_SPACE 0
+
+/**
+ * sba_io_pdir_entry - fill in one IO PDIR entry
+ * @pdir_ptr: pointer to IO PDIR entry
+ * @sid: process Space ID - currently only support KERNEL_SPACE
+ * @vba: Virtual CPU address of buffer to map
+ * @hint: DMA hint set to use for this mapping
+ *
+ * SBA Mapping Routine
+ *
+ * Given a virtual address (vba, arg2) and space id, (sid, arg1)
+ * sba_io_pdir_entry() loads the I/O PDIR entry pointed to by
+ * pdir_ptr (arg0).
+ * Using the bass-ackwards HP bit numbering, Each IO Pdir entry
+ * for Astro/Ike looks like:
+ *
+ *
+ * 0 19 51 55 63
+ * +-+---------------------+----------------------------------+----+--------+
+ * |V| U | PPN[43:12] | U | VI |
+ * +-+---------------------+----------------------------------+----+--------+
+ *
+ * Pluto is basically identical, supports fewer physical address bits:
+ *
+ * 0 23 51 55 63
+ * +-+------------------------+-------------------------------+----+--------+
+ * |V| U | PPN[39:12] | U | VI |
+ * +-+------------------------+-------------------------------+----+--------+
+ *
+ * V == Valid Bit (Most Significant Bit is bit 0)
+ * U == Unused
+ * PPN == Physical Page Number
+ * VI == Virtual Index (aka Coherent Index)
+ *
+ * LPA instruction output is put into PPN field.
+ * LCI (Load Coherence Index) instruction provides the "VI" bits.
+ *
+ * We pre-swap the bytes since PCX-W is Big Endian and the
+ * IOMMU uses little endian for the pdir.
+ */
+
+void SBA_INLINE
+sba_io_pdir_entry(u64 *pdir_ptr, space_t sid, unsigned long vba,
+ unsigned long hint)
+{
+ u64 pa; /* physical address */
+ register unsigned ci; /* coherent index */
+
+ pa = virt_to_phys(vba);
+ pa &= IOVP_MASK;
+
+ mtsp(sid,1);
+ asm("lci 0(%%sr1, %1), %0" : "=r" (ci) : "r" (vba));
+ pa |= (ci >> 12) & 0xff; /* move CI (8 bits) into lowest byte */
+
+ pa |= 0x8000000000000000ULL; /* set "valid" bit */
+ *pdir_ptr = cpu_to_le64(pa); /* swap and store into I/O Pdir */
+
+ /*
+ * If the PDC_MODEL capabilities has Non-coherent IO-PDIR bit set
+ * (bit #61, big endian), we have to flush and sync every time
+ * IO-PDIR is changed in Ike/Astro.
+ */
+ if (ioc_needs_fdc) {
+ asm volatile("fdc 0(%%sr1,%0)\n\tsync" : : "r" (pdir_ptr));
+ }
+}
+
+
+/**
+ * sba_mark_invalid - invalidate one or more IO PDIR entries
+ * @ioc: IO MMU structure which owns the pdir we are interested in.
+ * @iova: IO Virtual Address mapped earlier
+ * @byte_cnt: number of bytes this mapping covers.
+ *
+ * Marking the IO PDIR entry(ies) as Invalid and invalidate
+ * corresponding IO TLB entry. The Ike PCOM (Purge Command Register)
+ * is to purge stale entries in the IO TLB when unmapping entries.
+ *
+ * The PCOM register supports purging of multiple pages, with a minium
+ * of 1 page and a maximum of 2GB. Hardware requires the address be
+ * aligned to the size of the range being purged. The size of the range
+ * must be a power of 2. The "Cool perf optimization" in the
+ * allocation routine helps keep that true.
+ */
+static SBA_INLINE void
+sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt)
+{
+ u32 iovp = (u32) SBA_IOVP(ioc,iova);
+
+ /* Even though this is a big-endian machine, the entries
+ ** in the iopdir are little endian. That's why we clear the byte
+ ** at +7 instead of at +0.
+ */
+ int off = PDIR_INDEX(iovp)*sizeof(u64)+7;
+
+#ifdef ASSERT_PDIR_SANITY
+ /* Assert first pdir entry is set */
+ if (0x80 != (((u8 *) ioc->pdir_base)[off])) {
+ sba_dump_pdir_entry(ioc,"sba_mark_invalid()", PDIR_INDEX(iovp));
+ }
+#endif
+
+ if (byte_cnt <= IOVP_SIZE)
+ {
+ iovp |= IOVP_SHIFT; /* set "size" field for PCOM */
+
+ /*
+ ** clear I/O PDIR entry "valid" bit
+ ** Do NOT clear the rest - save it for debugging.
+ ** We should only clear bits that have previously
+ ** been enabled.
+ */
+ ((u8 *)(ioc->pdir_base))[off] = 0;
+ } else {
+ u32 t = get_order(byte_cnt) + PAGE_SHIFT;
+
+ iovp |= t;
+ do {
+ /* clear I/O Pdir entry "valid" bit first */
+ ((u8 *)(ioc->pdir_base))[off] = 0;
+ off += sizeof(u64);
+ byte_cnt -= IOVP_SIZE;
+ } while (byte_cnt > 0);
+ }
+
+ WRITE_REG( SBA_IOVA(ioc, iovp, 0, 0), ioc->ioc_hpa+IOC_PCOM);
+}
+
+/**
+ * sba_dma_supported - PCI driver can query DMA support
+ * @dev: instance of PCI owned by the driver that's asking
+ * @mask: number of address bits this PCI device can handle
+ *
+ * See Documentation/DMA-mapping.txt
+ */
+static int sba_dma_supported( struct device *dev, u64 mask)
+{
+ struct ioc *ioc;
+ if (dev == NULL) {
+ printk(KERN_ERR MODULE_NAME ": EISA/ISA/et al not supported\n");
+ BUG();
+ return(0);
+ }
+
+ ioc = GET_IOC(dev);
+
+ /* check if mask is > than the largest IO Virt Address */
+
+ return((int) (mask >= (ioc->ibase +
+ (ioc->pdir_size / sizeof(u64) * IOVP_SIZE) )));
+}
+
+
+/**
+ * sba_map_single - map one buffer and return IOVA for DMA
+ * @dev: instance of PCI owned by the driver that's asking.
+ * @addr: driver buffer to map.
+ * @size: number of bytes to map in driver buffer.
+ * @direction: R/W or both.
+ *
+ * See Documentation/DMA-mapping.txt
+ */
+static dma_addr_t
+sba_map_single(struct device *dev, void *addr, size_t size,
+ enum dma_data_direction direction)
+{
+ struct ioc *ioc;
+ unsigned long flags;
+ dma_addr_t iovp;
+ dma_addr_t offset;
+ u64 *pdir_start;
+ int pide;
+
+ ioc = GET_IOC(dev);
+
+ /* save offset bits */
+ offset = ((dma_addr_t) (long) addr) & ~IOVP_MASK;
+
+ /* round up to nearest IOVP_SIZE */
+ size = (size + offset + ~IOVP_MASK) & IOVP_MASK;
+
+ spin_lock_irqsave(&ioc->res_lock, flags);
+#ifdef ASSERT_PDIR_SANITY
+ sba_check_pdir(ioc,"Check before sba_map_single()");
+#endif
+
+#ifdef SBA_COLLECT_STATS
+ ioc->msingle_calls++;
+ ioc->msingle_pages += size >> IOVP_SHIFT;
+#endif
+ pide = sba_alloc_range(ioc, size);
+ iovp = (dma_addr_t) pide << IOVP_SHIFT;
+
+ DBG_RUN("%s() 0x%p -> 0x%lx\n",
+ __FUNCTION__, addr, (long) iovp | offset);
+
+ pdir_start = &(ioc->pdir_base[pide]);
+
+ while (size > 0) {
+ sba_io_pdir_entry(pdir_start, KERNEL_SPACE, (unsigned long) addr, 0);
+
+ DBG_RUN(" pdir 0x%p %02x%02x%02x%02x%02x%02x%02x%02x\n",
+ pdir_start,
+ (u8) (((u8 *) pdir_start)[7]),
+ (u8) (((u8 *) pdir_start)[6]),
+ (u8) (((u8 *) pdir_start)[5]),
+ (u8) (((u8 *) pdir_start)[4]),
+ (u8) (((u8 *) pdir_start)[3]),
+ (u8) (((u8 *) pdir_start)[2]),
+ (u8) (((u8 *) pdir_start)[1]),
+ (u8) (((u8 *) pdir_start)[0])
+ );
+
+ addr += IOVP_SIZE;
+ size -= IOVP_SIZE;
+ pdir_start++;
+ }
+ /* form complete address */
+#ifdef ASSERT_PDIR_SANITY
+ sba_check_pdir(ioc,"Check after sba_map_single()");
+#endif
+ spin_unlock_irqrestore(&ioc->res_lock, flags);
+ return SBA_IOVA(ioc, iovp, offset, DEFAULT_DMA_HINT_REG);
+}
+
+
+/**
+ * sba_unmap_single - unmap one IOVA and free resources
+ * @dev: instance of PCI owned by the driver that's asking.
+ * @iova: IOVA of driver buffer previously mapped.
+ * @size: number of bytes mapped in driver buffer.
+ * @direction: R/W or both.
+ *
+ * See Documentation/DMA-mapping.txt
+ */
+static void
+sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size,
+ enum dma_data_direction direction)
+{
+ struct ioc *ioc;
+#if DELAYED_RESOURCE_CNT > 0
+ struct sba_dma_pair *d;
+#endif
+ unsigned long flags;
+ dma_addr_t offset;
+
+ DBG_RUN("%s() iovp 0x%lx/%x\n", __FUNCTION__, (long) iova, size);
+
+ ioc = GET_IOC(dev);
+ offset = iova & ~IOVP_MASK;
+ iova ^= offset; /* clear offset bits */
+ size += offset;
+ size = ROUNDUP(size, IOVP_SIZE);
+
+ spin_lock_irqsave(&ioc->res_lock, flags);
+
+#ifdef SBA_COLLECT_STATS
+ ioc->usingle_calls++;
+ ioc->usingle_pages += size >> IOVP_SHIFT;
+#endif
+
+ sba_mark_invalid(ioc, iova, size);
+
+#if DELAYED_RESOURCE_CNT > 0
+ /* Delaying when we re-use a IO Pdir entry reduces the number
+ * of MMIO reads needed to flush writes to the PCOM register.
+ */
+ d = &(ioc->saved[ioc->saved_cnt]);
+ d->iova = iova;
+ d->size = size;
+ if (++(ioc->saved_cnt) >= DELAYED_RESOURCE_CNT) {
+ int cnt = ioc->saved_cnt;
+ while (cnt--) {
+ sba_free_range(ioc, d->iova, d->size);
+ d--;
+ }
+ ioc->saved_cnt = 0;
+ READ_REG(ioc->ioc_hpa+IOC_PCOM); /* flush purges */
+ }
+#else /* DELAYED_RESOURCE_CNT == 0 */
+ sba_free_range(ioc, iova, size);
+ READ_REG(ioc->ioc_hpa+IOC_PCOM); /* flush purges */
+#endif /* DELAYED_RESOURCE_CNT == 0 */
+ spin_unlock_irqrestore(&ioc->res_lock, flags);
+
+ /* XXX REVISIT for 2.5 Linux - need syncdma for zero-copy support.
+ ** For Astro based systems this isn't a big deal WRT performance.
+ ** As long as 2.4 kernels copyin/copyout data from/to userspace,
+ ** we don't need the syncdma. The issue here is I/O MMU cachelines
+ ** are *not* coherent in all cases. May be hwrev dependent.
+ ** Need to investigate more.
+ asm volatile("syncdma");
+ */
+}
+
+
+/**
+ * sba_alloc_consistent - allocate/map shared mem for DMA
+ * @hwdev: instance of PCI owned by the driver that's asking.
+ * @size: number of bytes mapped in driver buffer.
+ * @dma_handle: IOVA of new buffer.
+ *
+ * See Documentation/DMA-mapping.txt
+ */
+static void *sba_alloc_consistent(struct device *hwdev, size_t size,
+ dma_addr_t *dma_handle, int gfp)
+{
+ void *ret;
+
+ if (!hwdev) {
+ /* only support PCI */
+ *dma_handle = 0;
+ return 0;
+ }
+
+ ret = (void *) __get_free_pages(gfp, get_order(size));
+
+ if (ret) {
+ memset(ret, 0, size);
+ *dma_handle = sba_map_single(hwdev, ret, size, 0);
+ }
+
+ return ret;
+}
+
+
+/**
+ * sba_free_consistent - free/unmap shared mem for DMA
+ * @hwdev: instance of PCI owned by the driver that's asking.
+ * @size: number of bytes mapped in driver buffer.
+ * @vaddr: virtual address IOVA of "consistent" buffer.
+ * @dma_handler: IO virtual address of "consistent" buffer.
+ *
+ * See Documentation/DMA-mapping.txt
+ */
+static void
+sba_free_consistent(struct device *hwdev, size_t size, void *vaddr,
+ dma_addr_t dma_handle)
+{
+ sba_unmap_single(hwdev, dma_handle, size, 0);
+ free_pages((unsigned long) vaddr, get_order(size));
+}
+
+
+/*
+** Since 0 is a valid pdir_base index value, can't use that
+** to determine if a value is valid or not. Use a flag to indicate
+** the SG list entry contains a valid pdir index.
+*/
+#define PIDE_FLAG 0x80000000UL
+
+#ifdef SBA_COLLECT_STATS
+#define IOMMU_MAP_STATS
+#endif
+#include "iommu-helpers.h"
+
+#ifdef DEBUG_LARGE_SG_ENTRIES
+int dump_run_sg = 0;
+#endif
+
+
+/**
+ * sba_map_sg - map Scatter/Gather list
+ * @dev: instance of PCI owned by the driver that's asking.
+ * @sglist: array of buffer/length pairs
+ * @nents: number of entries in list
+ * @direction: R/W or both.
+ *
+ * See Documentation/DMA-mapping.txt
+ */
+static int
+sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
+ enum dma_data_direction direction)
+{
+ struct ioc *ioc;
+ int coalesced, filled = 0;
+ unsigned long flags;
+
+ DBG_RUN_SG("%s() START %d entries\n", __FUNCTION__, nents);
+
+ ioc = GET_IOC(dev);
+
+ /* Fast path single entry scatterlists. */
+ if (nents == 1) {
+ sg_dma_address(sglist) = sba_map_single(dev,
+ (void *)sg_virt_addr(sglist),
+ sglist->length, direction);
+ sg_dma_len(sglist) = sglist->length;
+ return 1;
+ }
+
+ spin_lock_irqsave(&ioc->res_lock, flags);
+
+#ifdef ASSERT_PDIR_SANITY
+ if (sba_check_pdir(ioc,"Check before sba_map_sg()"))
+ {
+ sba_dump_sg(ioc, sglist, nents);
+ panic("Check before sba_map_sg()");
+ }
+#endif
+
+#ifdef SBA_COLLECT_STATS
+ ioc->msg_calls++;
+#endif
+
+ /*
+ ** First coalesce the chunks and allocate I/O pdir space
+ **
+ ** If this is one DMA stream, we can properly map using the
+ ** correct virtual address associated with each DMA page.
+ ** w/o this association, we wouldn't have coherent DMA!
+ ** Access to the virtual address is what forces a two pass algorithm.
+ */
+ coalesced = iommu_coalesce_chunks(ioc, sglist, nents, sba_alloc_range);
+
+ /*
+ ** Program the I/O Pdir
+ **
+ ** map the virtual addresses to the I/O Pdir
+ ** o dma_address will contain the pdir index
+ ** o dma_len will contain the number of bytes to map
+ ** o address contains the virtual address.
+ */
+ filled = iommu_fill_pdir(ioc, sglist, nents, 0, sba_io_pdir_entry);
+
+#ifdef ASSERT_PDIR_SANITY
+ if (sba_check_pdir(ioc,"Check after sba_map_sg()"))
+ {
+ sba_dump_sg(ioc, sglist, nents);
+ panic("Check after sba_map_sg()\n");
+ }
+#endif
+
+ spin_unlock_irqrestore(&ioc->res_lock, flags);
+
+ DBG_RUN_SG("%s() DONE %d mappings\n", __FUNCTION__, filled);
+
+ return filled;
+}
+
+
+/**
+ * sba_unmap_sg - unmap Scatter/Gather list
+ * @dev: instance of PCI owned by the driver that's asking.
+ * @sglist: array of buffer/length pairs
+ * @nents: number of entries in list
+ * @direction: R/W or both.
+ *
+ * See Documentation/DMA-mapping.txt
+ */
+static void
+sba_unmap_sg(struct device *dev, struct scatterlist *sglist, int nents,
+ enum dma_data_direction direction)
+{
+ struct ioc *ioc;
+#ifdef ASSERT_PDIR_SANITY
+ unsigned long flags;
+#endif
+
+ DBG_RUN_SG("%s() START %d entries, %p,%x\n",
+ __FUNCTION__, nents, sg_virt_addr(sglist), sglist->length);
+
+ ioc = GET_IOC(dev);
+
+#ifdef SBA_COLLECT_STATS
+ ioc->usg_calls++;
+#endif
+
+#ifdef ASSERT_PDIR_SANITY
+ spin_lock_irqsave(&ioc->res_lock, flags);
+ sba_check_pdir(ioc,"Check before sba_unmap_sg()");
+ spin_unlock_irqrestore(&ioc->res_lock, flags);
+#endif
+
+ while (sg_dma_len(sglist) && nents--) {
+
+ sba_unmap_single(dev, sg_dma_address(sglist), sg_dma_len(sglist), direction);
+#ifdef SBA_COLLECT_STATS
+ ioc->usg_pages += ((sg_dma_address(sglist) & ~IOVP_MASK) + sg_dma_len(sglist) + IOVP_SIZE - 1) >> PAGE_SHIFT;
+ ioc->usingle_calls--; /* kluge since call is unmap_sg() */
+#endif
+ ++sglist;
+ }
+
+ DBG_RUN_SG("%s() DONE (nents %d)\n", __FUNCTION__, nents);
+
+#ifdef ASSERT_PDIR_SANITY
+ spin_lock_irqsave(&ioc->res_lock, flags);
+ sba_check_pdir(ioc,"Check after sba_unmap_sg()");
+ spin_unlock_irqrestore(&ioc->res_lock, flags);
+#endif
+
+}
+
+static struct hppa_dma_ops sba_ops = {
+ .dma_supported = sba_dma_supported,
+ .alloc_consistent = sba_alloc_consistent,
+ .alloc_noncoherent = sba_alloc_consistent,
+ .free_consistent = sba_free_consistent,
+ .map_single = sba_map_single,
+ .unmap_single = sba_unmap_single,
+ .map_sg = sba_map_sg,
+ .unmap_sg = sba_unmap_sg,
+ .dma_sync_single_for_cpu = NULL,
+ .dma_sync_single_for_device = NULL,
+ .dma_sync_sg_for_cpu = NULL,
+ .dma_sync_sg_for_device = NULL,
+};
+
+
+/**************************************************************************
+**
+** SBA PAT PDC support
+**
+** o call pdc_pat_cell_module()
+** o store ranges in PCI "resource" structures
+**
+**************************************************************************/
+
+static void
+sba_get_pat_resources(struct sba_device *sba_dev)
+{
+#if 0
+/*
+** TODO/REVISIT/FIXME: support for directed ranges requires calls to
+** PAT PDC to program the SBA/LBA directed range registers...this
+** burden may fall on the LBA code since it directly supports the
+** PCI subsystem. It's not clear yet. - ggg
+*/
+PAT_MOD(mod)->mod_info.mod_pages = PAT_GET_MOD_PAGES(temp);
+ FIXME : ???
+PAT_MOD(mod)->mod_info.dvi = PAT_GET_DVI(temp);
+ Tells where the dvi bits are located in the address.
+PAT_MOD(mod)->mod_info.ioc = PAT_GET_IOC(temp);
+ FIXME : ???
+#endif
+}
+
+
+/**************************************************************
+*
+* Initialization and claim
+*
+***************************************************************/
+#define PIRANHA_ADDR_MASK 0x00160000UL /* bit 17,18,20 */
+#define PIRANHA_ADDR_VAL 0x00060000UL /* bit 17,18 on */
+static void *
+sba_alloc_pdir(unsigned int pdir_size)
+{
+ unsigned long pdir_base;
+ unsigned long pdir_order = get_order(pdir_size);
+
+ pdir_base = __get_free_pages(GFP_KERNEL, pdir_order);
+ if (NULL == (void *) pdir_base)
+ panic("sba_ioc_init() could not allocate I/O Page Table\n");
+
+ /* If this is not PA8700 (PCX-W2)
+ ** OR newer than ver 2.2
+ ** OR in a system that doesn't need VINDEX bits from SBA,
+ **
+ ** then we aren't exposed to the HW bug.
+ */
+ if ( ((boot_cpu_data.pdc.cpuid >> 5) & 0x7f) != 0x13
+ || (boot_cpu_data.pdc.versions > 0x202)
+ || (boot_cpu_data.pdc.capabilities & 0x08L) )
+ return (void *) pdir_base;
+
+ /*
+ * PA8700 (PCX-W2, aka piranha) silent data corruption fix
+ *
+ * An interaction between PA8700 CPU (Ver 2.2 or older) and
+ * Ike/Astro can cause silent data corruption. This is only
+ * a problem if the I/O PDIR is located in memory such that
+ * (little-endian) bits 17 and 18 are on and bit 20 is off.
+ *
+ * Since the max IO Pdir size is 2MB, by cleverly allocating the
+ * right physical address, we can either avoid (IOPDIR <= 1MB)
+ * or minimize (2MB IO Pdir) the problem if we restrict the
+ * IO Pdir to a maximum size of 2MB-128K (1902K).
+ *
+ * Because we always allocate 2^N sized IO pdirs, either of the
+ * "bad" regions will be the last 128K if at all. That's easy
+ * to test for.
+ *
+ */
+ if (pdir_order <= (19-12)) {
+ if (((virt_to_phys(pdir_base)+pdir_size-1) & PIRANHA_ADDR_MASK) == PIRANHA_ADDR_VAL) {
+ /* allocate a new one on 512k alignment */
+ unsigned long new_pdir = __get_free_pages(GFP_KERNEL, (19-12));
+ /* release original */
+ free_pages(pdir_base, pdir_order);
+
+ pdir_base = new_pdir;
+
+ /* release excess */
+ while (pdir_order < (19-12)) {
+ new_pdir += pdir_size;
+ free_pages(new_pdir, pdir_order);
+ pdir_order +=1;
+ pdir_size <<=1;
+ }
+ }
+ } else {
+ /*
+ ** 1MB or 2MB Pdir
+ ** Needs to be aligned on an "odd" 1MB boundary.
+ */
+ unsigned long new_pdir = __get_free_pages(GFP_KERNEL, pdir_order+1); /* 2 or 4MB */
+
+ /* release original */
+ free_pages( pdir_base, pdir_order);
+
+ /* release first 1MB */
+ free_pages(new_pdir, 20-12);
+
+ pdir_base = new_pdir + 1024*1024;
+
+ if (pdir_order > (20-12)) {
+ /*
+ ** 2MB Pdir.
+ **
+ ** Flag tells init_bitmap() to mark bad 128k as used
+ ** and to reduce the size by 128k.
+ */
+ piranha_bad_128k = 1;
+
+ new_pdir += 3*1024*1024;
+ /* release last 1MB */
+ free_pages(new_pdir, 20-12);
+
+ /* release unusable 128KB */
+ free_pages(new_pdir - 128*1024 , 17-12);
+
+ pdir_size -= 128*1024;
+ }
+ }
+
+ memset((void *) pdir_base, 0, pdir_size);
+ return (void *) pdir_base;
+}
+
+/* setup Mercury or Elroy IBASE/IMASK registers. */
+static void setup_ibase_imask(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
+{
+ /* lba_set_iregs() is in drivers/parisc/lba_pci.c */
+ extern void lba_set_iregs(struct parisc_device *, u32, u32);
+ struct device *dev;
+
+ list_for_each_entry(dev, &sba->dev.children, node) {
+ struct parisc_device *lba = to_parisc_device(dev);
+ int rope_num = (lba->hpa >> 13) & 0xf;
+ if (rope_num >> 3 == ioc_num)
+ lba_set_iregs(lba, ioc->ibase, ioc->imask);
+ }
+}
+
+static void
+sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
+{
+ u32 iova_space_mask;
+ u32 iova_space_size;
+ int iov_order, tcnfg;
+#if SBA_AGP_SUPPORT
+ int agp_found = 0;
+#endif
+ /*
+ ** Firmware programs the base and size of a "safe IOVA space"
+ ** (one that doesn't overlap memory or LMMIO space) in the
+ ** IBASE and IMASK registers.
+ */
+ ioc->ibase = READ_REG(ioc->ioc_hpa + IOC_IBASE);
+ iova_space_size = ~(READ_REG(ioc->ioc_hpa + IOC_IMASK) & 0xFFFFFFFFUL) + 1;
+
+ if ((ioc->ibase < 0xfed00000UL) && ((ioc->ibase + iova_space_size) > 0xfee00000UL)) {
+ printk("WARNING: IOV space overlaps local config and interrupt message, truncating\n");
+ iova_space_size /= 2;
+ }
+
+ /*
+ ** iov_order is always based on a 1GB IOVA space since we want to
+ ** turn on the other half for AGP GART.
+ */
+ iov_order = get_order(iova_space_size >> (IOVP_SHIFT - PAGE_SHIFT));
+ ioc->pdir_size = (iova_space_size / IOVP_SIZE) * sizeof(u64);
+
+ DBG_INIT("%s() hpa 0x%lx IOV %dMB (%d bits)\n",
+ __FUNCTION__, ioc->ioc_hpa, iova_space_size >> 20,
+ iov_order + PAGE_SHIFT);
+
+ ioc->pdir_base = (void *) __get_free_pages(GFP_KERNEL,
+ get_order(ioc->pdir_size));
+ if (!ioc->pdir_base)
+ panic("Couldn't allocate I/O Page Table\n");
+
+ memset(ioc->pdir_base, 0, ioc->pdir_size);
+
+ DBG_INIT("%s() pdir %p size %x\n",
+ __FUNCTION__, ioc->pdir_base, ioc->pdir_size);
+
+#if SBA_HINT_SUPPORT
+ ioc->hint_shift_pdir = iov_order + PAGE_SHIFT;
+ ioc->hint_mask_pdir = ~(0x3 << (iov_order + PAGE_SHIFT));
+
+ DBG_INIT(" hint_shift_pdir %x hint_mask_pdir %lx\n",
+ ioc->hint_shift_pdir, ioc->hint_mask_pdir);
+#endif
+
+ WARN_ON((((unsigned long) ioc->pdir_base) & PAGE_MASK) != (unsigned long) ioc->pdir_base);
+ WRITE_REG(virt_to_phys(ioc->pdir_base), ioc->ioc_hpa + IOC_PDIR_BASE);
+
+ /* build IMASK for IOC and Elroy */
+ iova_space_mask = 0xffffffff;
+ iova_space_mask <<= (iov_order + PAGE_SHIFT);
+ ioc->imask = iova_space_mask;
+#ifdef ZX1_SUPPORT
+ ioc->iovp_mask = ~(iova_space_mask + PAGE_SIZE - 1);
+#endif
+ sba_dump_tlb(ioc->ioc_hpa);
+
+ setup_ibase_imask(sba, ioc, ioc_num);
+
+ WRITE_REG(ioc->imask, ioc->ioc_hpa + IOC_IMASK);
+
+#ifdef __LP64__
+ /*
+ ** Setting the upper bits makes checking for bypass addresses
+ ** a little faster later on.
+ */
+ ioc->imask |= 0xFFFFFFFF00000000UL;
+#endif
+
+ /* Set I/O PDIR Page size to system page size */
+ switch (PAGE_SHIFT) {
+ case 12: tcnfg = 0; break; /* 4K */
+ case 13: tcnfg = 1; break; /* 8K */
+ case 14: tcnfg = 2; break; /* 16K */
+ case 16: tcnfg = 3; break; /* 64K */
+ default:
+ panic(__FILE__ "Unsupported system page size %d",
+ 1 << PAGE_SHIFT);
+ break;
+ }
+ WRITE_REG(tcnfg, ioc->ioc_hpa + IOC_TCNFG);
+
+ /*
+ ** Program the IOC's ibase and enable IOVA translation
+ ** Bit zero == enable bit.
+ */
+ WRITE_REG(ioc->ibase | 1, ioc->ioc_hpa + IOC_IBASE);
+
+ /*
+ ** Clear I/O TLB of any possible entries.
+ ** (Yes. This is a bit paranoid...but so what)
+ */
+ WRITE_REG(ioc->ibase | 31, ioc->ioc_hpa + IOC_PCOM);
+
+#if SBA_AGP_SUPPORT
+ /*
+ ** If an AGP device is present, only use half of the IOV space
+ ** for PCI DMA. Unfortunately we can't know ahead of time
+ ** whether GART support will actually be used, for now we
+ ** can just key on any AGP device found in the system.
+ ** We program the next pdir index after we stop w/ a key for
+ ** the GART code to handshake on.
+ */
+ device=NULL;
+ for (lba = sba->child; lba; lba = lba->sibling) {
+ if (IS_QUICKSILVER(lba))
+ break;
+ }
+
+ if (lba) {
+ DBG_INIT("%s: Reserving half of IOVA space for AGP GART support\n", __FUNCTION__);
+ ioc->pdir_size /= 2;
+ ((u64 *)ioc->pdir_base)[PDIR_INDEX(iova_space_size/2)] = SBA_IOMMU_COOKIE;
+ } else {
+ DBG_INIT("%s: No GART needed - no AGP controller found\n", __FUNCTION__);
+ }
+#endif /* 0 */
+
+}
+
+static void
+sba_ioc_init(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
+{
+ u32 iova_space_size, iova_space_mask;
+ unsigned int pdir_size, iov_order;
+
+ /*
+ ** Determine IOVA Space size from memory size.
+ **
+ ** Ideally, PCI drivers would register the maximum number
+ ** of DMA they can have outstanding for each device they
+ ** own. Next best thing would be to guess how much DMA
+ ** can be outstanding based on PCI Class/sub-class. Both
+ ** methods still require some "extra" to support PCI
+ ** Hot-Plug/Removal of PCI cards. (aka PCI OLARD).
+ **
+ ** While we have 32-bits "IOVA" space, top two 2 bits are used
+ ** for DMA hints - ergo only 30 bits max.
+ */
+
+ iova_space_size = (u32) (num_physpages/global_ioc_cnt);
+
+ /* limit IOVA space size to 1MB-1GB */
+ if (iova_space_size < (1 << (20 - PAGE_SHIFT))) {
+ iova_space_size = 1 << (20 - PAGE_SHIFT);
+ }
+#ifdef __LP64__
+ else if (iova_space_size > (1 << (30 - PAGE_SHIFT))) {
+ iova_space_size = 1 << (30 - PAGE_SHIFT);
+ }
+#endif
+
+ /*
+ ** iova space must be log2() in size.
+ ** thus, pdir/res_map will also be log2().
+ ** PIRANHA BUG: Exception is when IO Pdir is 2MB (gets reduced)
+ */
+ iov_order = get_order(iova_space_size << PAGE_SHIFT);
+
+ /* iova_space_size is now bytes, not pages */
+ iova_space_size = 1 << (iov_order + PAGE_SHIFT);
+
+ ioc->pdir_size = pdir_size = (iova_space_size/IOVP_SIZE) * sizeof(u64);
+
+ DBG_INIT("%s() hpa 0x%lx mem %ldMB IOV %dMB (%d bits)\n",
+ __FUNCTION__,
+ ioc->ioc_hpa,
+ (unsigned long) num_physpages >> (20 - PAGE_SHIFT),
+ iova_space_size>>20,
+ iov_order + PAGE_SHIFT);
+
+ ioc->pdir_base = sba_alloc_pdir(pdir_size);
+
+ DBG_INIT("%s() pdir %p size %x\n",
+ __FUNCTION__, ioc->pdir_base, pdir_size);
+
+#if SBA_HINT_SUPPORT
+ /* FIXME : DMA HINTs not used */
+ ioc->hint_shift_pdir = iov_order + PAGE_SHIFT;
+ ioc->hint_mask_pdir = ~(0x3 << (iov_order + PAGE_SHIFT));
+
+ DBG_INIT(" hint_shift_pdir %x hint_mask_pdir %lx\n",
+ ioc->hint_shift_pdir, ioc->hint_mask_pdir);
+#endif
+
+ WRITE_REG64(virt_to_phys(ioc->pdir_base), ioc->ioc_hpa + IOC_PDIR_BASE);
+
+ /* build IMASK for IOC and Elroy */
+ iova_space_mask = 0xffffffff;
+ iova_space_mask <<= (iov_order + PAGE_SHIFT);
+
+ /*
+ ** On C3000 w/512MB mem, HP-UX 10.20 reports:
+ ** ibase=0, imask=0xFE000000, size=0x2000000.
+ */
+ ioc->ibase = 0;
+ ioc->imask = iova_space_mask; /* save it */
+#ifdef ZX1_SUPPORT
+ ioc->iovp_mask = ~(iova_space_mask + PAGE_SIZE - 1);
+#endif
+
+ DBG_INIT("%s() IOV base 0x%lx mask 0x%0lx\n",
+ __FUNCTION__, ioc->ibase, ioc->imask);
+
+ /*
+ ** FIXME: Hint registers are programmed with default hint
+ ** values during boot, so hints should be sane even if we
+ ** can't reprogram them the way drivers want.
+ */
+
+ setup_ibase_imask(sba, ioc, ioc_num);
+
+ /*
+ ** Program the IOC's ibase and enable IOVA translation
+ */
+ WRITE_REG(ioc->ibase | 1, ioc->ioc_hpa+IOC_IBASE);
+ WRITE_REG(ioc->imask, ioc->ioc_hpa+IOC_IMASK);
+
+ /* Set I/O PDIR Page size to 4K */
+ WRITE_REG(0, ioc->ioc_hpa+IOC_TCNFG);
+
+ /*
+ ** Clear I/O TLB of any possible entries.
+ ** (Yes. This is a bit paranoid...but so what)
+ */
+ WRITE_REG(0 | 31, ioc->ioc_hpa+IOC_PCOM);
+
+ ioc->ibase = 0; /* used by SBA_IOVA and related macros */
+
+ DBG_INIT("%s() DONE\n", __FUNCTION__);
+}
+
+
+
+/**************************************************************************
+**
+** SBA initialization code (HW and SW)
+**
+** o identify SBA chip itself
+** o initialize SBA chip modes (HardFail)
+** o initialize SBA chip modes (HardFail)
+** o FIXME: initialize DMA hints for reasonable defaults
+**
+**************************************************************************/
+
+static void __iomem *ioc_remap(struct sba_device *sba_dev, int offset)
+{
+ return ioremap(sba_dev->dev->hpa + offset, SBA_FUNC_SIZE);
+}
+
+static void sba_hw_init(struct sba_device *sba_dev)
+{
+ int i;
+ int num_ioc;
+ u64 ioc_ctl;
+
+ if (!is_pdc_pat()) {
+ /* Shutdown the USB controller on Astro-based workstations.
+ ** Once we reprogram the IOMMU, the next DMA performed by
+ ** USB will HPMC the box. USB is only enabled if a
+ ** keyboard is present and found.
+ **
+ ** With serial console, j6k v5.0 firmware says:
+ ** mem_kbd hpa 0xfee003f8 sba 0x0 pad 0x0 cl_class 0x7
+ **
+ ** FIXME: Using GFX+USB console at power up but direct
+ ** linux to serial console is still broken.
+ ** USB could generate DMA so we must reset USB.
+ ** The proper sequence would be:
+ ** o block console output
+ ** o reset USB device
+ ** o reprogram serial port
+ ** o unblock console output
+ */
+ if (PAGE0->mem_kbd.cl_class == CL_KEYBD) {
+ pdc_io_reset_devices();
+ }
+
+ }
+
+
+#if 0
+printk("sba_hw_init(): mem_boot 0x%x 0x%x 0x%x 0x%x\n", PAGE0->mem_boot.hpa,
+ PAGE0->mem_boot.spa, PAGE0->mem_boot.pad, PAGE0->mem_boot.cl_class);
+
+ /*
+ ** Need to deal with DMA from LAN.
+ ** Maybe use page zero boot device as a handle to talk
+ ** to PDC about which device to shutdown.
+ **
+ ** Netbooting, j6k v5.0 firmware says:
+ ** mem_boot hpa 0xf4008000 sba 0x0 pad 0x0 cl_class 0x1002
+ ** ARGH! invalid class.
+ */
+ if ((PAGE0->mem_boot.cl_class != CL_RANDOM)
+ && (PAGE0->mem_boot.cl_class != CL_SEQU)) {
+ pdc_io_reset();
+ }
+#endif
+
+ if (!IS_PLUTO(sba_dev->iodc)) {
+ ioc_ctl = READ_REG(sba_dev->sba_hpa+IOC_CTRL);
+ DBG_INIT("%s() hpa 0x%lx ioc_ctl 0x%Lx ->",
+ __FUNCTION__, sba_dev->sba_hpa, ioc_ctl);
+ ioc_ctl &= ~(IOC_CTRL_RM | IOC_CTRL_NC | IOC_CTRL_CE);
+ ioc_ctl |= IOC_CTRL_DD | IOC_CTRL_D4 | IOC_CTRL_TC;
+ /* j6700 v1.6 firmware sets 0x294f */
+ /* A500 firmware sets 0x4d */
+
+ WRITE_REG(ioc_ctl, sba_dev->sba_hpa+IOC_CTRL);
+
+#ifdef DEBUG_SBA_INIT
+ ioc_ctl = READ_REG64(sba_dev->sba_hpa+IOC_CTRL);
+ DBG_INIT(" 0x%Lx\n", ioc_ctl);
+#endif
+ } /* if !PLUTO */
+
+ if (IS_ASTRO(sba_dev->iodc)) {
+ int err;
+ /* PAT_PDC (L-class) also reports the same goofy base */
+ sba_dev->ioc[0].ioc_hpa = ioc_remap(sba_dev, ASTRO_IOC_OFFSET);
+ num_ioc = 1;
+
+ sba_dev->chip_resv.name = "Astro Intr Ack";
+ sba_dev->chip_resv.start = PCI_F_EXTEND | 0xfef00000UL;
+ sba_dev->chip_resv.end = PCI_F_EXTEND | (0xff000000UL - 1) ;
+ err = request_resource(&iomem_resource, &(sba_dev->chip_resv));
+ if (err < 0) {
+ BUG();
+ }
+
+ } else if (IS_PLUTO(sba_dev->iodc)) {
+ int err;
+
+ /* We use a negative value for IOC HPA so it gets
+ * corrected when we add it with IKE's IOC offset.
+ * Doesnt look clean, but fewer code.
+ */
+ sba_dev->ioc[0].ioc_hpa = ioc_remap(sba_dev, PLUTO_IOC_OFFSET);
+ num_ioc = 1;
+
+ sba_dev->chip_resv.name = "Pluto Intr/PIOP/VGA";
+ sba_dev->chip_resv.start = PCI_F_EXTEND | 0xfee00000UL;
+ sba_dev->chip_resv.end = PCI_F_EXTEND | (0xff200000UL - 1);
+ err = request_resource(&iomem_resource, &(sba_dev->chip_resv));
+ WARN_ON(err < 0);
+
+ sba_dev->iommu_resv.name = "IOVA Space";
+ sba_dev->iommu_resv.start = 0x40000000UL;
+ sba_dev->iommu_resv.end = 0x50000000UL - 1;
+ err = request_resource(&iomem_resource, &(sba_dev->iommu_resv));
+ WARN_ON(err < 0);
+ } else {
+ /* IS_IKE (ie N-class, L3000, L1500) */
+ sba_dev->ioc[0].ioc_hpa = ioc_remap(sba_dev, IKE_IOC_OFFSET(0));
+ sba_dev->ioc[1].ioc_hpa = ioc_remap(sba_dev, IKE_IOC_OFFSET(1));
+ num_ioc = 2;
+
+ /* TODO - LOOKUP Ike/Stretch chipset mem map */
+ }
+ /* XXX: What about Reo? */
+
+ sba_dev->num_ioc = num_ioc;
+ for (i = 0; i < num_ioc; i++) {
+ /*
+ ** Make sure the box crashes if we get any errors on a rope.
+ */
+ WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE0_CTL);
+ WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE1_CTL);
+ WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE2_CTL);
+ WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE3_CTL);
+ WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE4_CTL);
+ WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE5_CTL);
+ WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE6_CTL);
+ WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE7_CTL);
+
+ /* flush out the writes */
+ READ_REG(sba_dev->ioc[i].ioc_hpa + ROPE7_CTL);
+
+ DBG_INIT(" ioc[%d] ROPE_CFG 0x%Lx ROPE_DBG 0x%Lx\n",
+ i,
+ READ_REG(sba_dev->ioc[i].ioc_hpa + 0x40),
+ READ_REG(sba_dev->ioc[i].ioc_hpa + 0x50)
+ );
+ DBG_INIT(" STATUS_CONTROL 0x%Lx FLUSH_CTRL 0x%Lx\n",
+ READ_REG(sba_dev->ioc[i].ioc_hpa + 0x108),
+ READ_REG(sba_dev->ioc[i].ioc_hpa + 0x400)
+ );
+
+ if (IS_PLUTO(sba_dev->iodc)) {
+ sba_ioc_init_pluto(sba_dev->dev, &(sba_dev->ioc[i]), i);
+ } else {
+ sba_ioc_init(sba_dev->dev, &(sba_dev->ioc[i]), i);
+ }
+ }
+}
+
+static void
+sba_common_init(struct sba_device *sba_dev)
+{
+ int i;
+
+ /* add this one to the head of the list (order doesn't matter)
+ ** This will be useful for debugging - especially if we get coredumps
+ */
+ sba_dev->next = sba_list;
+ sba_list = sba_dev;
+
+ for(i=0; i< sba_dev->num_ioc; i++) {
+ int res_size;
+#ifdef DEBUG_DMB_TRAP
+ extern void iterate_pages(unsigned long , unsigned long ,
+ void (*)(pte_t * , unsigned long),
+ unsigned long );
+ void set_data_memory_break(pte_t * , unsigned long);
+#endif
+ /* resource map size dictated by pdir_size */
+ res_size = sba_dev->ioc[i].pdir_size/sizeof(u64); /* entries */
+
+ /* Second part of PIRANHA BUG */
+ if (piranha_bad_128k) {
+ res_size -= (128*1024)/sizeof(u64);
+ }
+
+ res_size >>= 3; /* convert bit count to byte count */
+ DBG_INIT("%s() res_size 0x%x\n",
+ __FUNCTION__, res_size);
+
+ sba_dev->ioc[i].res_size = res_size;
+ sba_dev->ioc[i].res_map = (char *) __get_free_pages(GFP_KERNEL, get_order(res_size));
+
+#ifdef DEBUG_DMB_TRAP
+ iterate_pages( sba_dev->ioc[i].res_map, res_size,
+ set_data_memory_break, 0);
+#endif
+
+ if (NULL == sba_dev->ioc[i].res_map)
+ {
+ panic("%s:%s() could not allocate resource map\n",
+ __FILE__, __FUNCTION__ );
+ }
+
+ memset(sba_dev->ioc[i].res_map, 0, res_size);
+ /* next available IOVP - circular search */
+ sba_dev->ioc[i].res_hint = (unsigned long *)
+ &(sba_dev->ioc[i].res_map[L1_CACHE_BYTES]);
+
+#ifdef ASSERT_PDIR_SANITY
+ /* Mark first bit busy - ie no IOVA 0 */
+ sba_dev->ioc[i].res_map[0] = 0x80;
+ sba_dev->ioc[i].pdir_base[0] = 0xeeffc0addbba0080ULL;
+#endif
+
+ /* Third (and last) part of PIRANHA BUG */
+ if (piranha_bad_128k) {
+ /* region from +1408K to +1536 is un-usable. */
+
+ int idx_start = (1408*1024/sizeof(u64)) >> 3;
+ int idx_end = (1536*1024/sizeof(u64)) >> 3;
+ long *p_start = (long *) &(sba_dev->ioc[i].res_map[idx_start]);
+ long *p_end = (long *) &(sba_dev->ioc[i].res_map[idx_end]);
+
+ /* mark that part of the io pdir busy */
+ while (p_start < p_end)
+ *p_start++ = -1;
+
+ }
+
+#ifdef DEBUG_DMB_TRAP
+ iterate_pages( sba_dev->ioc[i].res_map, res_size,
+ set_data_memory_break, 0);
+ iterate_pages( sba_dev->ioc[i].pdir_base, sba_dev->ioc[i].pdir_size,
+ set_data_memory_break, 0);
+#endif
+
+ DBG_INIT("%s() %d res_map %x %p\n",
+ __FUNCTION__, i, res_size, sba_dev->ioc[i].res_map);
+ }
+
+ spin_lock_init(&sba_dev->sba_lock);
+ ioc_needs_fdc = boot_cpu_data.pdc.capabilities & PDC_MODEL_IOPDIR_FDC;
+
+#ifdef DEBUG_SBA_INIT
+ /*
+ * If the PDC_MODEL capabilities has Non-coherent IO-PDIR bit set
+ * (bit #61, big endian), we have to flush and sync every time
+ * IO-PDIR is changed in Ike/Astro.
+ */
+ if (boot_cpu_data.pdc.capabilities & PDC_MODEL_IOPDIR_FDC) {
+ printk(KERN_INFO MODULE_NAME " FDC/SYNC required.\n");
+ } else {
+ printk(KERN_INFO MODULE_NAME " IOC has cache coherent PDIR.\n");
+ }
+#endif
+}
+
+#ifdef CONFIG_PROC_FS
+static int sba_proc_info(char *buf, char **start, off_t offset, int len)
+{
+ struct sba_device *sba_dev = sba_list;
+ struct ioc *ioc = &sba_dev->ioc[0]; /* FIXME: Multi-IOC support! */
+ int total_pages = (int) (ioc->res_size << 3); /* 8 bits per byte */
+ unsigned long i;
+#ifdef SBA_COLLECT_STATS
+ unsigned long avg = 0, min, max;
+#endif
+
+ sprintf(buf, "%s rev %d.%d\n",
+ sba_dev->name,
+ (sba_dev->hw_rev & 0x7) + 1,
+ (sba_dev->hw_rev & 0x18) >> 3
+ );
+ sprintf(buf, "%sIO PDIR size : %d bytes (%d entries)\n",
+ buf,
+ (int) ((ioc->res_size << 3) * sizeof(u64)), /* 8 bits/byte */
+ total_pages);
+
+ sprintf(buf, "%sResource bitmap : %d bytes (%d pages)\n",
+ buf, ioc->res_size, ioc->res_size << 3); /* 8 bits per byte */
+
+ sprintf(buf, "%sLMMIO_BASE/MASK/ROUTE %08x %08x %08x\n",
+ buf,
+ READ_REG32(sba_dev->sba_hpa + LMMIO_DIST_BASE),
+ READ_REG32(sba_dev->sba_hpa + LMMIO_DIST_MASK),
+ READ_REG32(sba_dev->sba_hpa + LMMIO_DIST_ROUTE)
+ );
+
+ for (i=0; i<4; i++)
+ sprintf(buf, "%sDIR%ld_BASE/MASK/ROUTE %08x %08x %08x\n",
+ buf, i,
+ READ_REG32(sba_dev->sba_hpa + LMMIO_DIRECT0_BASE + i*0x18),
+ READ_REG32(sba_dev->sba_hpa + LMMIO_DIRECT0_MASK + i*0x18),
+ READ_REG32(sba_dev->sba_hpa + LMMIO_DIRECT0_ROUTE + i*0x18)
+ );
+
+#ifdef SBA_COLLECT_STATS
+ sprintf(buf, "%sIO PDIR entries : %ld free %ld used (%d%%)\n", buf,
+ total_pages - ioc->used_pages, ioc->used_pages,
+ (int) (ioc->used_pages * 100 / total_pages));
+
+ min = max = ioc->avg_search[0];
+ for (i = 0; i < SBA_SEARCH_SAMPLE; i++) {
+ avg += ioc->avg_search[i];
+ if (ioc->avg_search[i] > max) max = ioc->avg_search[i];
+ if (ioc->avg_search[i] < min) min = ioc->avg_search[i];
+ }
+ avg /= SBA_SEARCH_SAMPLE;
+ sprintf(buf, "%s Bitmap search : %ld/%ld/%ld (min/avg/max CPU Cycles)\n",
+ buf, min, avg, max);
+
+ sprintf(buf, "%spci_map_single(): %12ld calls %12ld pages (avg %d/1000)\n",
+ buf, ioc->msingle_calls, ioc->msingle_pages,
+ (int) ((ioc->msingle_pages * 1000)/ioc->msingle_calls));
+
+ /* KLUGE - unmap_sg calls unmap_single for each mapped page */
+ min = ioc->usingle_calls;
+ max = ioc->usingle_pages - ioc->usg_pages;
+ sprintf(buf, "%spci_unmap_single: %12ld calls %12ld pages (avg %d/1000)\n",
+ buf, min, max,
+ (int) ((max * 1000)/min));
+
+ sprintf(buf, "%spci_map_sg() : %12ld calls %12ld pages (avg %d/1000)\n",
+ buf, ioc->msg_calls, ioc->msg_pages,
+ (int) ((ioc->msg_pages * 1000)/ioc->msg_calls));
+
+ sprintf(buf, "%spci_unmap_sg() : %12ld calls %12ld pages (avg %d/1000)\n",
+ buf, ioc->usg_calls, ioc->usg_pages,
+ (int) ((ioc->usg_pages * 1000)/ioc->usg_calls));
+#endif
+
+ return strlen(buf);
+}
+
+#if 0
+/* XXX too much output - exceeds 4k limit and needs to be re-written */
+static int
+sba_resource_map(char *buf, char **start, off_t offset, int len)
+{
+ struct sba_device *sba_dev = sba_list;
+ struct ioc *ioc = &sba_dev->ioc[0]; /* FIXME: Mutli-IOC suppoer! */
+ unsigned int *res_ptr = (unsigned int *)ioc->res_map;
+ int i;
+
+ buf[0] = '\0';
+ for(i = 0; i < (ioc->res_size / sizeof(unsigned int)); ++i, ++res_ptr) {
+ if ((i & 7) == 0)
+ strcat(buf,"\n ");
+ sprintf(buf, "%s %08x", buf, *res_ptr);
+ }
+ strcat(buf, "\n");
+
+ return strlen(buf);
+}
+#endif /* 0 */
+#endif /* CONFIG_PROC_FS */
+
+static struct parisc_device_id sba_tbl[] = {
+ { HPHW_IOA, HVERSION_REV_ANY_ID, ASTRO_RUNWAY_PORT, 0xb },
+ { HPHW_BCPORT, HVERSION_REV_ANY_ID, IKE_MERCED_PORT, 0xc },
+ { HPHW_BCPORT, HVERSION_REV_ANY_ID, REO_MERCED_PORT, 0xc },
+ { HPHW_BCPORT, HVERSION_REV_ANY_ID, REOG_MERCED_PORT, 0xc },
+ { HPHW_IOA, HVERSION_REV_ANY_ID, PLUTO_MCKINLEY_PORT, 0xc },
+ { 0, }
+};
+
+int sba_driver_callback(struct parisc_device *);
+
+static struct parisc_driver sba_driver = {
+ .name = MODULE_NAME,
+ .id_table = sba_tbl,
+ .probe = sba_driver_callback,
+};
+
+/*
+** Determine if sba should claim this chip (return 0) or not (return 1).
+** If so, initialize the chip and tell other partners in crime they
+** have work to do.
+*/
+int
+sba_driver_callback(struct parisc_device *dev)
+{
+ struct sba_device *sba_dev;
+ u32 func_class;
+ int i;
+ char *version;
+ void __iomem *sba_addr = ioremap(dev->hpa, SBA_FUNC_SIZE);
+
+ sba_dump_ranges(sba_addr);
+
+ /* Read HW Rev First */
+ func_class = READ_REG(sba_addr + SBA_FCLASS);
+
+ if (IS_ASTRO(&dev->id)) {
+ unsigned long fclass;
+ static char astro_rev[]="Astro ?.?";
+
+ /* Astro is broken...Read HW Rev First */
+ fclass = READ_REG(sba_addr);
+
+ astro_rev[6] = '1' + (char) (fclass & 0x7);
+ astro_rev[8] = '0' + (char) ((fclass & 0x18) >> 3);
+ version = astro_rev;
+
+ } else if (IS_IKE(&dev->id)) {
+ static char ike_rev[] = "Ike rev ?";
+ ike_rev[8] = '0' + (char) (func_class & 0xff);
+ version = ike_rev;
+ } else if (IS_PLUTO(&dev->id)) {
+ static char pluto_rev[]="Pluto ?.?";
+ pluto_rev[6] = '0' + (char) ((func_class & 0xf0) >> 4);
+ pluto_rev[8] = '0' + (char) (func_class & 0x0f);
+ version = pluto_rev;
+ } else {
+ static char reo_rev[] = "REO rev ?";
+ reo_rev[8] = '0' + (char) (func_class & 0xff);
+ version = reo_rev;
+ }
+
+ if (!global_ioc_cnt) {
+ global_ioc_cnt = count_parisc_driver(&sba_driver);
+
+ /* Astro and Pluto have one IOC per SBA */
+ if ((!IS_ASTRO(&dev->id)) || (!IS_PLUTO(&dev->id)))
+ global_ioc_cnt *= 2;
+ }
+
+ printk(KERN_INFO "%s found %s at 0x%lx\n",
+ MODULE_NAME, version, dev->hpa);
+
+ sba_dev = kmalloc(sizeof(struct sba_device), GFP_KERNEL);
+ if (!sba_dev) {
+ printk(KERN_ERR MODULE_NAME " - couldn't alloc sba_device\n");
+ return -ENOMEM;
+ }
+
+ parisc_set_drvdata(dev, sba_dev);
+ memset(sba_dev, 0, sizeof(struct sba_device));
+
+ for(i=0; i<MAX_IOC; i++)
+ spin_lock_init(&(sba_dev->ioc[i].res_lock));
+
+ sba_dev->dev = dev;
+ sba_dev->hw_rev = func_class;
+ sba_dev->iodc = &dev->id;
+ sba_dev->name = dev->name;
+ sba_dev->sba_hpa = sba_addr;
+
+ sba_get_pat_resources(sba_dev);
+ sba_hw_init(sba_dev);
+ sba_common_init(sba_dev);
+
+ hppa_dma_ops = &sba_ops;
+
+#ifdef CONFIG_PROC_FS
+ if (IS_ASTRO(&dev->id)) {
+ create_proc_info_entry("Astro", 0, proc_runway_root, sba_proc_info);
+ } else if (IS_IKE(&dev->id)) {
+ create_proc_info_entry("Ike", 0, proc_runway_root, sba_proc_info);
+ } else if (IS_PLUTO(&dev->id)) {
+ create_proc_info_entry("Pluto", 0, proc_mckinley_root, sba_proc_info);
+ } else {
+ create_proc_info_entry("Reo", 0, proc_runway_root, sba_proc_info);
+ }
+#if 0
+ create_proc_info_entry("bitmap", 0, proc_runway_root, sba_resource_map);
+#endif
+#endif
+ parisc_vmerge_boundary = IOVP_SIZE;
+ parisc_vmerge_max_size = IOVP_SIZE * BITS_PER_LONG;
+ parisc_has_iommu();
+ return 0;
+}
+
+/*
+** One time initialization to let the world know the SBA was found.
+** This is the only routine which is NOT static.
+** Must be called exactly once before pci_init().
+*/
+void __init sba_init(void)
+{
+ register_parisc_driver(&sba_driver);
+}
+
+
+/**
+ * sba_get_iommu - Assign the iommu pointer for the pci bus controller.
+ * @dev: The parisc device.
+ *
+ * Returns the appropriate IOMMU data for the given parisc PCI controller.
+ * This is cached and used later for PCI DMA Mapping.
+ */
+void * sba_get_iommu(struct parisc_device *pci_hba)
+{
+ struct parisc_device *sba_dev = parisc_parent(pci_hba);
+ struct sba_device *sba = sba_dev->dev.driver_data;
+ char t = sba_dev->id.hw_type;
+ int iocnum = (pci_hba->hw_path >> 3); /* rope # */
+
+ WARN_ON((t != HPHW_IOA) && (t != HPHW_BCPORT));
+
+ return &(sba->ioc[iocnum]);
+}
+
+
+/**
+ * sba_directed_lmmio - return first directed LMMIO range routed to rope
+ * @pa_dev: The parisc device.
+ * @r: resource PCI host controller wants start/end fields assigned.
+ *
+ * For the given parisc PCI controller, determine if any direct ranges
+ * are routed down the corresponding rope.
+ */
+void sba_directed_lmmio(struct parisc_device *pci_hba, struct resource *r)
+{
+ struct parisc_device *sba_dev = parisc_parent(pci_hba);
+ struct sba_device *sba = sba_dev->dev.driver_data;
+ char t = sba_dev->id.hw_type;
+ int i;
+ int rope = (pci_hba->hw_path & (ROPES_PER_IOC-1)); /* rope # */
+
+ if ((t!=HPHW_IOA) && (t!=HPHW_BCPORT))
+ BUG();
+
+ r->start = r->end = 0;
+
+ /* Astro has 4 directed ranges. Not sure about Ike/Pluto/et al */
+ for (i=0; i<4; i++) {
+ int base, size;
+ void __iomem *reg = sba->sba_hpa + i*0x18;
+
+ base = READ_REG32(reg + LMMIO_DIRECT0_BASE);
+ if ((base & 1) == 0)
+ continue; /* not enabled */
+
+ size = READ_REG32(reg + LMMIO_DIRECT0_ROUTE);
+
+ if ((size & (ROPES_PER_IOC-1)) != rope)
+ continue; /* directed down different rope */
+
+ r->start = (base & ~1UL) | PCI_F_EXTEND;
+ size = ~ READ_REG32(reg + LMMIO_DIRECT0_MASK);
+ r->end = r->start + size;
+ }
+}
+
+
+/**
+ * sba_distributed_lmmio - return portion of distributed LMMIO range
+ * @pa_dev: The parisc device.
+ * @r: resource PCI host controller wants start/end fields assigned.
+ *
+ * For the given parisc PCI controller, return portion of distributed LMMIO
+ * range. The distributed LMMIO is always present and it's just a question
+ * of the base address and size of the range.
+ */
+void sba_distributed_lmmio(struct parisc_device *pci_hba, struct resource *r )
+{
+ struct parisc_device *sba_dev = parisc_parent(pci_hba);
+ struct sba_device *sba = sba_dev->dev.driver_data;
+ char t = sba_dev->id.hw_type;
+ int base, size;
+ int rope = (pci_hba->hw_path & (ROPES_PER_IOC-1)); /* rope # */
+
+ if ((t!=HPHW_IOA) && (t!=HPHW_BCPORT))
+ BUG();
+
+ r->start = r->end = 0;
+
+ base = READ_REG32(sba->sba_hpa + LMMIO_DIST_BASE);
+ if ((base & 1) == 0) {
+ BUG(); /* Gah! Distr Range wasn't enabled! */
+ return;
+ }
+
+ r->start = (base & ~1UL) | PCI_F_EXTEND;
+
+ size = (~READ_REG32(sba->sba_hpa + LMMIO_DIST_MASK)) / ROPES_PER_IOC;
+ r->start += rope * (size + 1); /* adjust base for this rope */
+ r->end = r->start + size;
+}