Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/s390/cio/blacklist.c b/drivers/s390/cio/blacklist.c
new file mode 100644
index 0000000..4a06c7d
--- /dev/null
+++ b/drivers/s390/cio/blacklist.c
@@ -0,0 +1,351 @@
+/*
+ * drivers/s390/cio/blacklist.c
+ * S/390 common I/O routines -- blacklisting of specific devices
+ * $Revision: 1.33 $
+ *
+ * Copyright (C) 1999-2002 IBM Deutschland Entwicklung GmbH,
+ * IBM Corporation
+ * Author(s): Ingo Adlung (adlung@de.ibm.com)
+ * Cornelia Huck (cohuck@de.ibm.com)
+ * Arnd Bergmann (arndb@de.ibm.com)
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/vmalloc.h>
+#include <linux/slab.h>
+#include <linux/proc_fs.h>
+#include <linux/ctype.h>
+#include <linux/device.h>
+
+#include <asm/cio.h>
+#include <asm/uaccess.h>
+
+#include "blacklist.h"
+#include "cio.h"
+#include "cio_debug.h"
+#include "css.h"
+
+/*
+ * "Blacklisting" of certain devices:
+ * Device numbers given in the commandline as cio_ignore=... won't be known
+ * to Linux.
+ *
+ * These can be single devices or ranges of devices
+ */
+
+/* 65536 bits to indicate if a devno is blacklisted or not */
+#define __BL_DEV_WORDS (__MAX_SUBCHANNELS + (8*sizeof(long) - 1) / \
+ (8*sizeof(long)))
+static unsigned long bl_dev[__BL_DEV_WORDS];
+typedef enum {add, free} range_action;
+
+/*
+ * Function: blacklist_range
+ * (Un-)blacklist the devices from-to
+ */
+static inline void
+blacklist_range (range_action action, unsigned int from, unsigned int to)
+{
+ if (!to)
+ to = from;
+
+ if (from > to || to > __MAX_SUBCHANNELS) {
+ printk (KERN_WARNING "Invalid blacklist range "
+ "0x%04x to 0x%04x, skipping\n", from, to);
+ return;
+ }
+ for (; from <= to; from++) {
+ if (action == add)
+ set_bit (from, bl_dev);
+ else
+ clear_bit (from, bl_dev);
+ }
+}
+
+/*
+ * Function: blacklist_busid
+ * Get devno/busid from given string.
+ * Shamelessly grabbed from dasd_devmap.c.
+ */
+static inline int
+blacklist_busid(char **str, int *id0, int *id1, int *devno)
+{
+ int val, old_style;
+ char *sav;
+
+ sav = *str;
+
+ /* check for leading '0x' */
+ old_style = 0;
+ if ((*str)[0] == '0' && (*str)[1] == 'x') {
+ *str += 2;
+ old_style = 1;
+ }
+ if (!isxdigit((*str)[0])) /* We require at least one hex digit */
+ goto confused;
+ val = simple_strtoul(*str, str, 16);
+ if (old_style || (*str)[0] != '.') {
+ *id0 = *id1 = 0;
+ if (val < 0 || val > 0xffff)
+ goto confused;
+ *devno = val;
+ if ((*str)[0] != ',' && (*str)[0] != '-' &&
+ (*str)[0] != '\n' && (*str)[0] != '\0')
+ goto confused;
+ return 0;
+ }
+ /* New style x.y.z busid */
+ if (val < 0 || val > 0xff)
+ goto confused;
+ *id0 = val;
+ (*str)++;
+ if (!isxdigit((*str)[0])) /* We require at least one hex digit */
+ goto confused;
+ val = simple_strtoul(*str, str, 16);
+ if (val < 0 || val > 0xff || (*str)++[0] != '.')
+ goto confused;
+ *id1 = val;
+ if (!isxdigit((*str)[0])) /* We require at least one hex digit */
+ goto confused;
+ val = simple_strtoul(*str, str, 16);
+ if (val < 0 || val > 0xffff)
+ goto confused;
+ *devno = val;
+ if ((*str)[0] != ',' && (*str)[0] != '-' &&
+ (*str)[0] != '\n' && (*str)[0] != '\0')
+ goto confused;
+ return 0;
+confused:
+ strsep(str, ",\n");
+ printk(KERN_WARNING "Invalid cio_ignore parameter '%s'\n", sav);
+ return 1;
+}
+
+static inline int
+blacklist_parse_parameters (char *str, range_action action)
+{
+ unsigned int from, to, from_id0, to_id0, from_id1, to_id1;
+
+ while (*str != 0 && *str != '\n') {
+ range_action ra = action;
+ while(*str == ',')
+ str++;
+ if (*str == '!') {
+ ra = !action;
+ ++str;
+ }
+
+ /*
+ * Since we have to parse the proc commands and the
+ * kernel arguments we have to check four cases
+ */
+ if (strncmp(str,"all,",4) == 0 || strcmp(str,"all") == 0 ||
+ strncmp(str,"all\n",4) == 0 || strncmp(str,"all ",4) == 0) {
+ from = 0;
+ to = __MAX_SUBCHANNELS;
+ str += 3;
+ } else {
+ int rc;
+
+ rc = blacklist_busid(&str, &from_id0,
+ &from_id1, &from);
+ if (rc)
+ continue;
+ to = from;
+ to_id0 = from_id0;
+ to_id1 = from_id1;
+ if (*str == '-') {
+ str++;
+ rc = blacklist_busid(&str, &to_id0,
+ &to_id1, &to);
+ if (rc)
+ continue;
+ }
+ if (*str == '-') {
+ printk(KERN_WARNING "invalid cio_ignore "
+ "parameter '%s'\n",
+ strsep(&str, ",\n"));
+ continue;
+ }
+ if ((from_id0 != to_id0) || (from_id1 != to_id1)) {
+ printk(KERN_WARNING "invalid cio_ignore range "
+ "%x.%x.%04x-%x.%x.%04x\n",
+ from_id0, from_id1, from,
+ to_id0, to_id1, to);
+ continue;
+ }
+ }
+ /* FIXME: ignoring id0 and id1 here. */
+ pr_debug("blacklist_setup: adding range "
+ "from 0.0.%04x to 0.0.%04x\n", from, to);
+ blacklist_range (ra, from, to);
+ }
+ return 1;
+}
+
+/* Parsing the commandline for blacklist parameters, e.g. to blacklist
+ * bus ids 0.0.1234, 0.0.1235 and 0.0.1236, you could use any of:
+ * - cio_ignore=1234-1236
+ * - cio_ignore=0x1234-0x1235,1236
+ * - cio_ignore=0x1234,1235-1236
+ * - cio_ignore=1236 cio_ignore=1234-0x1236
+ * - cio_ignore=1234 cio_ignore=1236 cio_ignore=0x1235
+ * - cio_ignore=0.0.1234-0.0.1236
+ * - cio_ignore=0.0.1234,0x1235,1236
+ * - ...
+ */
+static int __init
+blacklist_setup (char *str)
+{
+ CIO_MSG_EVENT(6, "Reading blacklist parameters\n");
+ return blacklist_parse_parameters (str, add);
+}
+
+__setup ("cio_ignore=", blacklist_setup);
+
+/* Checking if devices are blacklisted */
+
+/*
+ * Function: is_blacklisted
+ * Returns 1 if the given devicenumber can be found in the blacklist,
+ * otherwise 0.
+ * Used by validate_subchannel()
+ */
+int
+is_blacklisted (int devno)
+{
+ return test_bit (devno, bl_dev);
+}
+
+#ifdef CONFIG_PROC_FS
+/*
+ * Function: s390_redo_validation
+ * Look for no longer blacklisted devices
+ * FIXME: there must be a better way to do this */
+static inline void
+s390_redo_validation (void)
+{
+ unsigned int irq;
+
+ CIO_TRACE_EVENT (0, "redoval");
+ for (irq = 0; irq < __MAX_SUBCHANNELS; irq++) {
+ int ret;
+ struct subchannel *sch;
+
+ sch = get_subchannel_by_schid(irq);
+ if (sch) {
+ /* Already known. */
+ put_device(&sch->dev);
+ continue;
+ }
+ ret = css_probe_device(irq);
+ if (ret == -ENXIO)
+ break; /* We're through. */
+ if (ret == -ENOMEM)
+ /*
+ * Stop validation for now. Bad, but no need for a
+ * panic.
+ */
+ break;
+ }
+}
+
+/*
+ * Function: blacklist_parse_proc_parameters
+ * parse the stuff which is piped to /proc/cio_ignore
+ */
+static inline void
+blacklist_parse_proc_parameters (char *buf)
+{
+ if (strncmp (buf, "free ", 5) == 0) {
+ blacklist_parse_parameters (buf + 5, free);
+ } else if (strncmp (buf, "add ", 4) == 0) {
+ /*
+ * We don't need to check for known devices since
+ * css_probe_device will handle this correctly.
+ */
+ blacklist_parse_parameters (buf + 4, add);
+ } else {
+ printk (KERN_WARNING "cio_ignore: Parse error; \n"
+ KERN_WARNING "try using 'free all|<devno-range>,"
+ "<devno-range>,...'\n"
+ KERN_WARNING "or 'add <devno-range>,"
+ "<devno-range>,...'\n");
+ return;
+ }
+
+ s390_redo_validation ();
+}
+
+/* FIXME: These should be real bus ids and not home-grown ones! */
+static int cio_ignore_read (char *page, char **start, off_t off,
+ int count, int *eof, void *data)
+{
+ const unsigned int entry_size = 18; /* "0.0.ABCD-0.0.EFGH\n" */
+ long devno;
+ int len;
+
+ len = 0;
+ for (devno = off; /* abuse the page variable
+ * as counter, see fs/proc/generic.c */
+ devno <= __MAX_SUBCHANNELS && len + entry_size < count; devno++) {
+ if (!test_bit(devno, bl_dev))
+ continue;
+ len += sprintf(page + len, "0.0.%04lx", devno);
+ if (test_bit(devno + 1, bl_dev)) { /* print range */
+ while (++devno < __MAX_SUBCHANNELS)
+ if (!test_bit(devno, bl_dev))
+ break;
+ len += sprintf(page + len, "-0.0.%04lx", --devno);
+ }
+ len += sprintf(page + len, "\n");
+ }
+
+ if (devno <= __MAX_SUBCHANNELS)
+ *eof = 1;
+ *start = (char *) (devno - off); /* number of checked entries */
+ return len;
+}
+
+static int cio_ignore_write(struct file *file, const char __user *user_buf,
+ unsigned long user_len, void *data)
+{
+ char *buf;
+
+ if (user_len > 65536)
+ user_len = 65536;
+ buf = vmalloc (user_len + 1); /* maybe better use the stack? */
+ if (buf == NULL)
+ return -ENOMEM;
+ if (strncpy_from_user (buf, user_buf, user_len) < 0) {
+ vfree (buf);
+ return -EFAULT;
+ }
+ buf[user_len] = '\0';
+
+ blacklist_parse_proc_parameters (buf);
+
+ vfree (buf);
+ return user_len;
+}
+
+static int
+cio_ignore_proc_init (void)
+{
+ struct proc_dir_entry *entry;
+
+ entry = create_proc_entry ("cio_ignore", S_IFREG | S_IRUGO | S_IWUSR,
+ &proc_root);
+ if (!entry)
+ return 0;
+
+ entry->read_proc = cio_ignore_read;
+ entry->write_proc = cio_ignore_write;
+
+ return 1;
+}
+
+__initcall (cio_ignore_proc_init);
+
+#endif /* CONFIG_PROC_FS */