Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
new file mode 100644
index 0000000..ad5b776
--- /dev/null
+++ b/drivers/serial/sh-sci.c
@@ -0,0 +1,1692 @@
+/*
+ * drivers/serial/sh-sci.c
+ *
+ * SuperH on-chip serial module support. (SCI with no FIFO / with FIFO)
+ *
+ * Copyright (C) 2002, 2003, 2004 Paul Mundt
+ *
+ * based off of the old drivers/char/sh-sci.c by:
+ *
+ * Copyright (C) 1999, 2000 Niibe Yutaka
+ * Copyright (C) 2000 Sugioka Toshinobu
+ * Modified to support multiple serial ports. Stuart Menefy (May 2000).
+ * Modified to support SecureEdge. David McCullough (2002)
+ * Modified to support SH7300 SCIF. Takashi Kusuda (Jun 2003).
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#undef DEBUG
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/sysrq.h>
+#include <linux/fcntl.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/console.h>
+#include <linux/bitops.h>
+
+#ifdef CONFIG_CPU_FREQ
+#include <linux/notifier.h>
+#include <linux/cpufreq.h>
+#endif
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#include <linux/generic_serial.h>
+
+#ifdef CONFIG_SH_STANDARD_BIOS
+#include <asm/sh_bios.h>
+#endif
+
+#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include "sh-sci.h"
+
+#ifdef CONFIG_SH_KGDB
+#include <asm/kgdb.h>
+
+static int kgdb_get_char(struct sci_port *port);
+static void kgdb_put_char(struct sci_port *port, char c);
+static void kgdb_handle_error(struct sci_port *port);
+static struct sci_port *kgdb_sci_port;
+#endif /* CONFIG_SH_KGDB */
+
+#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
+static struct sci_port *serial_console_port = 0;
+#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
+
+/* Function prototypes */
+static void sci_stop_tx(struct uart_port *port, unsigned int tty_stop);
+static void sci_start_tx(struct uart_port *port, unsigned int tty_start);
+static void sci_start_rx(struct uart_port *port, unsigned int tty_start);
+static void sci_stop_rx(struct uart_port *port);
+static int sci_request_irq(struct sci_port *port);
+static void sci_free_irq(struct sci_port *port);
+
+static struct sci_port sci_ports[SCI_NPORTS];
+static struct uart_driver sci_uart_driver;
+
+#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB)
+
+static void handle_error(struct uart_port *port)
+{ /* Clear error flags */
+ sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
+}
+
+static int get_char(struct uart_port *port)
+{
+ unsigned long flags;
+ unsigned short status;
+ int c;
+
+ local_irq_save(flags);
+ do {
+ status = sci_in(port, SCxSR);
+ if (status & SCxSR_ERRORS(port)) {
+ handle_error(port);
+ continue;
+ }
+ } while (!(status & SCxSR_RDxF(port)));
+ c = sci_in(port, SCxRDR);
+ sci_in(port, SCxSR); /* Dummy read */
+ sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
+ local_irq_restore(flags);
+
+ return c;
+}
+
+/* Taken from sh-stub.c of GDB 4.18 */
+static const char hexchars[] = "0123456789abcdef";
+
+static __inline__ char highhex(int x)
+{
+ return hexchars[(x >> 4) & 0xf];
+}
+
+static __inline__ char lowhex(int x)
+{
+ return hexchars[x & 0xf];
+}
+
+#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */
+
+/*
+ * Send the packet in buffer. The host gets one chance to read it.
+ * This routine does not wait for a positive acknowledge.
+ */
+
+#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
+static void put_char(struct uart_port *port, char c)
+{
+ unsigned long flags;
+ unsigned short status;
+
+ local_irq_save(flags);
+
+ do {
+ status = sci_in(port, SCxSR);
+ } while (!(status & SCxSR_TDxE(port)));
+
+ sci_out(port, SCxTDR, c);
+ sci_in(port, SCxSR); /* Dummy read */
+ sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
+
+ local_irq_restore(flags);
+}
+
+static void put_string(struct sci_port *sci_port, const char *buffer, int count)
+{
+ struct uart_port *port = &sci_port->port;
+ const unsigned char *p = buffer;
+ int i;
+
+#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB)
+ int checksum;
+ int usegdb=0;
+
+#ifdef CONFIG_SH_STANDARD_BIOS
+ /* This call only does a trap the first time it is
+ * called, and so is safe to do here unconditionally
+ */
+ usegdb |= sh_bios_in_gdb_mode();
+#endif
+#ifdef CONFIG_SH_KGDB
+ usegdb |= (kgdb_in_gdb_mode && (port == kgdb_sci_port));
+#endif
+
+ if (usegdb) {
+ /* $<packet info>#<checksum>. */
+ do {
+ unsigned char c;
+ put_char(port, '$');
+ put_char(port, 'O'); /* 'O'utput to console */
+ checksum = 'O';
+
+ for (i=0; i<count; i++) { /* Don't use run length encoding */
+ int h, l;
+
+ c = *p++;
+ h = highhex(c);
+ l = lowhex(c);
+ put_char(port, h);
+ put_char(port, l);
+ checksum += h + l;
+ }
+ put_char(port, '#');
+ put_char(port, highhex(checksum));
+ put_char(port, lowhex(checksum));
+ } while (get_char(port) != '+');
+ } else
+#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */
+ for (i=0; i<count; i++) {
+ if (*p == 10)
+ put_char(port, '\r');
+ put_char(port, *p++);
+ }
+}
+#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
+
+
+#ifdef CONFIG_SH_KGDB
+
+/* Is the SCI ready, ie is there a char waiting? */
+static int kgdb_is_char_ready(struct sci_port *port)
+{
+ unsigned short status = sci_in(port, SCxSR);
+
+ if (status & (SCxSR_ERRORS(port) | SCxSR_BRK(port)))
+ kgdb_handle_error(port);
+
+ return (status & SCxSR_RDxF(port));
+}
+
+/* Write a char */
+static void kgdb_put_char(struct sci_port *port, char c)
+{
+ unsigned short status;
+
+ do
+ status = sci_in(port, SCxSR);
+ while (!(status & SCxSR_TDxE(port)));
+
+ sci_out(port, SCxTDR, c);
+ sci_in(port, SCxSR); /* Dummy read */
+ sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
+}
+
+/* Get a char if there is one, else ret -1 */
+static int kgdb_get_char(struct sci_port *port)
+{
+ int c;
+
+ if (kgdb_is_char_ready(port) == 0)
+ c = -1;
+ else {
+ c = sci_in(port, SCxRDR);
+ sci_in(port, SCxSR); /* Dummy read */
+ sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
+ }
+
+ return c;
+}
+
+/* Called from kgdbstub.c to get a character, i.e. is blocking */
+static int kgdb_sci_getchar(void)
+{
+ volatile int c;
+
+ /* Keep trying to read a character, this could be neater */
+ while ((c = kgdb_get_char(kgdb_sci_port)) < 0);
+
+ return c;
+}
+
+/* Called from kgdbstub.c to put a character, just a wrapper */
+static void kgdb_sci_putchar(int c)
+{
+
+ kgdb_put_char(kgdb_sci_port, c);
+}
+
+/* Clear any errors on the SCI */
+static void kgdb_handle_error(struct sci_port *port)
+{
+ sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port)); /* Clear error flags */
+}
+
+/* Breakpoint if there's a break sent on the serial port */
+static void kgdb_break_interrupt(int irq, void *ptr, struct pt_regs *regs)
+{
+ struct sci_port *port = ptr;
+ unsigned short status = sci_in(port, SCxSR);
+
+ if (status & SCxSR_BRK(port)) {
+
+ /* Break into the debugger if a break is detected */
+ BREAKPOINT();
+
+ /* Clear */
+ sci_out(port, SCxSR, SCxSR_BREAK_CLEAR(port));
+ }
+}
+
+#endif /* CONFIG_SH_KGDB */
+
+#if defined(__H8300S__)
+enum { sci_disable, sci_enable };
+
+static void h8300_sci_enable(struct uart_port* port, unsigned int ctrl)
+{
+ volatile unsigned char *mstpcrl=(volatile unsigned char *)MSTPCRL;
+ int ch = (port->mapbase - SMR0) >> 3;
+ unsigned char mask = 1 << (ch+1);
+
+ if (ctrl == sci_disable) {
+ *mstpcrl |= mask;
+ } else {
+ *mstpcrl &= ~mask;
+ }
+}
+#endif
+
+#if defined(SCI_ONLY) || defined(SCI_AND_SCIF)
+#if defined(__H8300H__) || defined(__H8300S__)
+static void sci_init_pins_sci(struct uart_port* port, unsigned int cflag)
+{
+ int ch = (port->mapbase - SMR0) >> 3;
+
+ /* set DDR regs */
+ H8300_GPIO_DDR(h8300_sci_pins[ch].port,h8300_sci_pins[ch].rx,H8300_GPIO_INPUT);
+ H8300_GPIO_DDR(h8300_sci_pins[ch].port,h8300_sci_pins[ch].tx,H8300_GPIO_OUTPUT);
+ /* tx mark output*/
+ H8300_SCI_DR(ch) |= h8300_sci_pins[ch].tx;
+}
+#else
+static void sci_init_pins_sci(struct uart_port *port, unsigned int cflag)
+{
+}
+#endif
+#endif
+
+#if defined(SCIF_ONLY) || defined(SCI_AND_SCIF)
+#if defined(CONFIG_CPU_SH3)
+/* For SH7705, SH7707, SH7709, SH7709A, SH7729, SH7300*/
+static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
+{
+ unsigned int fcr_val = 0;
+#if !defined(CONFIG_CPU_SUBTYPE_SH7300) /* SH7300 doesn't use RTS/CTS */
+ {
+ unsigned short data;
+
+ /* We need to set SCPCR to enable RTS/CTS */
+ data = ctrl_inw(SCPCR);
+ /* Clear out SCP7MD1,0, SCP6MD1,0, SCP4MD1,0*/
+ ctrl_outw(data&0x0fcf, SCPCR);
+ }
+ if (cflag & CRTSCTS)
+ fcr_val |= SCFCR_MCE;
+ else {
+ unsigned short data;
+
+ /* We need to set SCPCR to enable RTS/CTS */
+ data = ctrl_inw(SCPCR);
+ /* Clear out SCP7MD1,0, SCP4MD1,0,
+ Set SCP6MD1,0 = {01} (output) */
+ ctrl_outw((data&0x0fcf)|0x1000, SCPCR);
+
+ data = ctrl_inb(SCPDR);
+ /* Set /RTS2 (bit6) = 0 */
+ ctrl_outb(data&0xbf, SCPDR);
+ }
+#endif
+ sci_out(port, SCFCR, fcr_val);
+}
+
+static void sci_init_pins_irda(struct uart_port *port, unsigned int cflag)
+{
+ unsigned int fcr_val = 0;
+
+ if (cflag & CRTSCTS)
+ fcr_val |= SCFCR_MCE;
+
+ sci_out(port, SCFCR, fcr_val);
+}
+
+#else
+
+/* For SH7750 */
+static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
+{
+ unsigned int fcr_val = 0;
+
+ if (cflag & CRTSCTS) {
+ fcr_val |= SCFCR_MCE;
+ } else {
+ ctrl_outw(0x0080, SCSPTR2); /* Set RTS = 1 */
+ }
+ sci_out(port, SCFCR, fcr_val);
+}
+
+#endif
+#endif /* SCIF_ONLY || SCI_AND_SCIF */
+
+/* ********************************************************************** *
+ * the interrupt related routines *
+ * ********************************************************************** */
+
+static void sci_transmit_chars(struct uart_port *port)
+{
+ struct circ_buf *xmit = &port->info->xmit;
+ unsigned int stopped = uart_tx_stopped(port);
+ unsigned long flags;
+ unsigned short status;
+ unsigned short ctrl;
+ int count, txroom;
+
+ status = sci_in(port, SCxSR);
+ if (!(status & SCxSR_TDxE(port))) {
+ local_irq_save(flags);
+ ctrl = sci_in(port, SCSCR);
+ if (uart_circ_empty(xmit)) {
+ ctrl &= ~SCI_CTRL_FLAGS_TIE;
+ } else {
+ ctrl |= SCI_CTRL_FLAGS_TIE;
+ }
+ sci_out(port, SCSCR, ctrl);
+ local_irq_restore(flags);
+ return;
+ }
+
+#if !defined(SCI_ONLY)
+ if (port->type == PORT_SCIF) {
+ txroom = SCIF_TXROOM_MAX - (sci_in(port, SCFDR)>>8);
+ } else {
+ txroom = (sci_in(port, SCxSR) & SCI_TDRE)?1:0;
+ }
+#else
+ txroom = (sci_in(port, SCxSR) & SCI_TDRE)?1:0;
+#endif
+
+ count = txroom;
+
+ do {
+ unsigned char c;
+
+ if (port->x_char) {
+ c = port->x_char;
+ port->x_char = 0;
+ } else if (!uart_circ_empty(xmit) && !stopped) {
+ c = xmit->buf[xmit->tail];
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ } else {
+ break;
+ }
+
+ sci_out(port, SCxTDR, c);
+
+ port->icount.tx++;
+ } while (--count > 0);
+
+ sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+ if (uart_circ_empty(xmit)) {
+ sci_stop_tx(port, 0);
+ } else {
+ local_irq_save(flags);
+ ctrl = sci_in(port, SCSCR);
+
+#if !defined(SCI_ONLY)
+ if (port->type == PORT_SCIF) {
+ sci_in(port, SCxSR); /* Dummy read */
+ sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
+ }
+#endif
+
+ ctrl |= SCI_CTRL_FLAGS_TIE;
+ sci_out(port, SCSCR, ctrl);
+ local_irq_restore(flags);
+ }
+}
+
+/* On SH3, SCIF may read end-of-break as a space->mark char */
+#define STEPFN(c) ({int __c=(c); (((__c-1)|(__c)) == -1); })
+
+static inline void sci_receive_chars(struct uart_port *port,
+ struct pt_regs *regs)
+{
+ struct tty_struct *tty = port->info->tty;
+ int i, count, copied = 0;
+ unsigned short status;
+
+ status = sci_in(port, SCxSR);
+ if (!(status & SCxSR_RDxF(port)))
+ return;
+
+ while (1) {
+#if !defined(SCI_ONLY)
+ if (port->type == PORT_SCIF) {
+ count = sci_in(port, SCFDR)&SCIF_RFDC_MASK ;
+ } else {
+ count = (sci_in(port, SCxSR)&SCxSR_RDxF(port))?1:0;
+ }
+#else
+ count = (sci_in(port, SCxSR)&SCxSR_RDxF(port))?1:0;
+#endif
+
+ /* Don't copy more bytes than there is room for in the buffer */
+ if (tty->flip.count + count > TTY_FLIPBUF_SIZE)
+ count = TTY_FLIPBUF_SIZE - tty->flip.count;
+
+ /* If for any reason we can't copy more data, we're done! */
+ if (count == 0)
+ break;
+
+ if (port->type == PORT_SCI) {
+ char c = sci_in(port, SCxRDR);
+ if(((struct sci_port *)port)->break_flag
+ || uart_handle_sysrq_char(port, c, regs)) {
+ count = 0;
+ } else {
+ tty->flip.char_buf_ptr[0] = c;
+ tty->flip.flag_buf_ptr[0] = TTY_NORMAL;
+ }
+ } else {
+ for (i=0; i<count; i++) {
+ char c = sci_in(port, SCxRDR);
+ status = sci_in(port, SCxSR);
+#if defined(CONFIG_CPU_SH3)
+ /* Skip "chars" during break */
+ if (((struct sci_port *)port)->break_flag) {
+ if ((c == 0) &&
+ (status & SCxSR_FER(port))) {
+ count--; i--;
+ continue;
+ }
+ /* Nonzero => end-of-break */
+ pr_debug("scif: debounce<%02x>\n", c);
+ ((struct sci_port *)port)->break_flag = 0;
+ if (STEPFN(c)) {
+ count--; i--;
+ continue;
+ }
+ }
+#endif /* CONFIG_CPU_SH3 */
+ if (uart_handle_sysrq_char(port, c, regs)) {
+ count--; i--;
+ continue;
+ }
+
+ /* Store data and status */
+ tty->flip.char_buf_ptr[i] = c;
+ if (status&SCxSR_FER(port)) {
+ tty->flip.flag_buf_ptr[i] = TTY_FRAME;
+ pr_debug("sci: frame error\n");
+ } else if (status&SCxSR_PER(port)) {
+ tty->flip.flag_buf_ptr[i] = TTY_PARITY;
+ pr_debug("sci: parity error\n");
+ } else {
+ tty->flip.flag_buf_ptr[i] = TTY_NORMAL;
+ }
+ }
+ }
+
+ sci_in(port, SCxSR); /* dummy read */
+ sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
+
+ /* Update the kernel buffer end */
+ tty->flip.count += count;
+ tty->flip.char_buf_ptr += count;
+ tty->flip.flag_buf_ptr += count;
+ copied += count;
+ port->icount.rx += count;
+ }
+
+ if (copied) {
+ /* Tell the rest of the system the news. New characters! */
+ tty_flip_buffer_push(tty);
+ } else {
+ sci_in(port, SCxSR); /* dummy read */
+ sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
+ }
+}
+
+#define SCI_BREAK_JIFFIES (HZ/20)
+/* The sci generates interrupts during the break,
+ * 1 per millisecond or so during the break period, for 9600 baud.
+ * So dont bother disabling interrupts.
+ * But dont want more than 1 break event.
+ * Use a kernel timer to periodically poll the rx line until
+ * the break is finished.
+ */
+static void sci_schedule_break_timer(struct sci_port *port)
+{
+ port->break_timer.expires = jiffies + SCI_BREAK_JIFFIES;
+ add_timer(&port->break_timer);
+}
+/* Ensure that two consecutive samples find the break over. */
+static void sci_break_timer(unsigned long data)
+{
+ struct sci_port * port = (struct sci_port *)data;
+ if(sci_rxd_in(&port->port) == 0) {
+ port->break_flag = 1;
+ sci_schedule_break_timer(port);
+ } else if(port->break_flag == 1){
+ /* break is over. */
+ port->break_flag = 2;
+ sci_schedule_break_timer(port);
+ } else port->break_flag = 0;
+}
+
+static inline int sci_handle_errors(struct uart_port *port)
+{
+ int copied = 0;
+ unsigned short status = sci_in(port, SCxSR);
+ struct tty_struct *tty = port->info->tty;
+
+ if (status&SCxSR_ORER(port) && tty->flip.count<TTY_FLIPBUF_SIZE) {
+ /* overrun error */
+ copied++;
+ *tty->flip.flag_buf_ptr++ = TTY_OVERRUN;
+ pr_debug("sci: overrun error\n");
+ }
+
+ if (status&SCxSR_FER(port) && tty->flip.count<TTY_FLIPBUF_SIZE) {
+ if (sci_rxd_in(port) == 0) {
+ /* Notify of BREAK */
+ struct sci_port * sci_port = (struct sci_port *)port;
+ if(!sci_port->break_flag) {
+ sci_port->break_flag = 1;
+ sci_schedule_break_timer((struct sci_port *)port);
+ /* Do sysrq handling. */
+ if(uart_handle_break(port)) {
+ return 0;
+ }
+ pr_debug("sci: BREAK detected\n");
+ copied++;
+ *tty->flip.flag_buf_ptr++ = TTY_BREAK;
+ }
+ }
+ else {
+ /* frame error */
+ copied++;
+ *tty->flip.flag_buf_ptr++ = TTY_FRAME;
+ pr_debug("sci: frame error\n");
+ }
+ }
+
+ if (status&SCxSR_PER(port) && tty->flip.count<TTY_FLIPBUF_SIZE) {
+ /* parity error */
+ copied++;
+ *tty->flip.flag_buf_ptr++ = TTY_PARITY;
+ pr_debug("sci: parity error\n");
+ }
+
+ if (copied) {
+ tty->flip.count += copied;
+ tty_flip_buffer_push(tty);
+ }
+
+ return copied;
+}
+
+static inline int sci_handle_breaks(struct uart_port *port)
+{
+ int copied = 0;
+ unsigned short status = sci_in(port, SCxSR);
+ struct tty_struct *tty = port->info->tty;
+ struct sci_port *s = &sci_ports[port->line];
+
+ if (!s->break_flag && status & SCxSR_BRK(port) &&
+ tty->flip.count < TTY_FLIPBUF_SIZE) {
+#if defined(CONFIG_CPU_SH3)
+ /* Debounce break */
+ s->break_flag = 1;
+#endif
+ /* Notify of BREAK */
+ copied++;
+ *tty->flip.flag_buf_ptr++ = TTY_BREAK;
+ pr_debug("sci: BREAK detected\n");
+ }
+
+#if defined(SCIF_ORER)
+ /* XXX: Handle SCIF overrun error */
+ if (port->type == PORT_SCIF && (sci_in(port, SCLSR) & SCIF_ORER) != 0) {
+ sci_out(port, SCLSR, 0);
+ if(tty->flip.count<TTY_FLIPBUF_SIZE) {
+ copied++;
+ *tty->flip.flag_buf_ptr++ = TTY_OVERRUN;
+ pr_debug("sci: overrun error\n");
+ }
+ }
+#endif
+
+ if (copied) {
+ tty->flip.count += copied;
+ tty_flip_buffer_push(tty);
+ }
+
+ return copied;
+}
+
+static irqreturn_t sci_rx_interrupt(int irq, void *ptr, struct pt_regs *regs)
+{
+ struct uart_port *port = ptr;
+
+ /* I think sci_receive_chars has to be called irrespective
+ * of whether the I_IXOFF is set, otherwise, how is the interrupt
+ * to be disabled?
+ */
+ sci_receive_chars(port, regs);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t sci_tx_interrupt(int irq, void *ptr, struct pt_regs *regs)
+{
+ struct uart_port *port = ptr;
+
+ sci_transmit_chars(port);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t sci_er_interrupt(int irq, void *ptr, struct pt_regs *regs)
+{
+ struct uart_port *port = ptr;
+
+ /* Handle errors */
+ if (port->type == PORT_SCI) {
+ if (sci_handle_errors(port)) {
+ /* discard character in rx buffer */
+ sci_in(port, SCxSR);
+ sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
+ }
+ } else {
+#if defined(SCIF_ORER)
+ if((sci_in(port, SCLSR) & SCIF_ORER) != 0) {
+ struct tty_struct *tty = port->info->tty;
+
+ sci_out(port, SCLSR, 0);
+ if(tty->flip.count<TTY_FLIPBUF_SIZE) {
+ *tty->flip.flag_buf_ptr++ = TTY_OVERRUN;
+ tty->flip.count++;
+ tty_flip_buffer_push(tty);
+ pr_debug("scif: overrun error\n");
+ }
+ }
+#endif
+ sci_rx_interrupt(irq, ptr, regs);
+ }
+
+ sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
+
+ /* Kick the transmission */
+ sci_tx_interrupt(irq, ptr, regs);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t sci_br_interrupt(int irq, void *ptr, struct pt_regs *regs)
+{
+ struct uart_port *port = ptr;
+
+ /* Handle BREAKs */
+ sci_handle_breaks(port);
+ sci_out(port, SCxSR, SCxSR_BREAK_CLEAR(port));
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr, struct pt_regs *regs)
+{
+ unsigned short ssr_status, scr_status;
+ struct uart_port *port = ptr;
+
+ ssr_status = sci_in(port,SCxSR);
+ scr_status = sci_in(port,SCSCR);
+
+ /* Tx Interrupt */
+ if ((ssr_status&0x0020) && (scr_status&0x0080))
+ sci_tx_interrupt(irq, ptr, regs);
+ /* Rx Interrupt */
+ if ((ssr_status&0x0002) && (scr_status&0x0040))
+ sci_rx_interrupt(irq, ptr, regs);
+ /* Error Interrupt */
+ if ((ssr_status&0x0080) && (scr_status&0x0400))
+ sci_er_interrupt(irq, ptr, regs);
+ /* Break Interrupt */
+ if ((ssr_status&0x0010) && (scr_status&0x0200))
+ sci_br_interrupt(irq, ptr, regs);
+
+ return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_CPU_FREQ
+/*
+ * Here we define a transistion notifier so that we can update all of our
+ * ports' baud rate when the peripheral clock changes.
+ */
+static int sci_notifier(struct notifier_block *self, unsigned long phase, void *p)
+{
+ struct cpufreq_freqs *freqs = p;
+ int i;
+
+ if ((phase == CPUFREQ_POSTCHANGE) ||
+ (phase == CPUFREQ_RESUMECHANGE)){
+ for (i = 0; i < SCI_NPORTS; i++) {
+ struct uart_port *port = &sci_ports[i].port;
+
+ /*
+ * Update the uartclk per-port if frequency has
+ * changed, since it will no longer necessarily be
+ * consistent with the old frequency.
+ *
+ * Really we want to be able to do something like
+ * uart_change_speed() or something along those lines
+ * here to implicitly reset the per-port baud rate..
+ *
+ * Clean this up later..
+ */
+ port->uartclk = current_cpu_data.module_clock * 16;
+ }
+
+ printk("%s: got a postchange notification for cpu %d (old %d, new %d)\n",
+ __FUNCTION__, freqs->cpu, freqs->old, freqs->new);
+ }
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block sci_nb = { &sci_notifier, NULL, 0 };
+#endif /* CONFIG_CPU_FREQ */
+
+static int sci_request_irq(struct sci_port *port)
+{
+ int i;
+ irqreturn_t (*handlers[4])(int irq, void *ptr, struct pt_regs *regs) = {
+ sci_er_interrupt, sci_rx_interrupt, sci_tx_interrupt,
+ sci_br_interrupt,
+ };
+ const char *desc[] = { "SCI Receive Error", "SCI Receive Data Full",
+ "SCI Transmit Data Empty", "SCI Break" };
+
+ if (port->irqs[0] == port->irqs[1]) {
+ if (!port->irqs[0]) {
+ printk(KERN_ERR "sci: Cannot allocate irq.(IRQ=0)\n");
+ return -ENODEV;
+ }
+ if (request_irq(port->irqs[0], sci_mpxed_interrupt, SA_INTERRUPT,
+ "sci", port)) {
+ printk(KERN_ERR "sci: Cannot allocate irq.\n");
+ return -ENODEV;
+ }
+ } else {
+ for (i = 0; i < ARRAY_SIZE(handlers); i++) {
+ if (!port->irqs[i])
+ continue;
+ if (request_irq(port->irqs[i], handlers[i], SA_INTERRUPT,
+ desc[i], port)) {
+ printk(KERN_ERR "sci: Cannot allocate irq.\n");
+ return -ENODEV;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static void sci_free_irq(struct sci_port *port)
+{
+ int i;
+
+ if (port->irqs[0] == port->irqs[1]) {
+ if (!port->irqs[0])
+ printk("sci: sci_free_irq error\n");
+ else
+ free_irq(port->irqs[0], port);
+ } else {
+ for (i = 0; i < ARRAY_SIZE(port->irqs); i++) {
+ if (!port->irqs[i])
+ continue;
+
+ free_irq(port->irqs[i], port);
+ }
+ }
+}
+
+static unsigned int sci_tx_empty(struct uart_port *port)
+{
+ /* Can't detect */
+ return TIOCSER_TEMT;
+}
+
+static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ /* This routine is used for seting signals of: DTR, DCD, CTS/RTS */
+ /* We use SCIF's hardware for CTS/RTS, so don't need any for that. */
+ /* If you have signals for DTR and DCD, please implement here. */
+}
+
+static unsigned int sci_get_mctrl(struct uart_port *port)
+{
+ /* This routine is used for geting signals of: DTR, DCD, DSR, RI,
+ and CTS/RTS */
+
+ return TIOCM_DTR | TIOCM_RTS | TIOCM_DSR;
+}
+
+static void sci_start_tx(struct uart_port *port, unsigned int tty_start)
+{
+ struct sci_port *s = &sci_ports[port->line];
+
+ disable_irq(s->irqs[SCIx_TXI_IRQ]);
+ sci_transmit_chars(port);
+ enable_irq(s->irqs[SCIx_TXI_IRQ]);
+}
+
+static void sci_stop_tx(struct uart_port *port, unsigned int tty_stop)
+{
+ unsigned long flags;
+ unsigned short ctrl;
+
+ /* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */
+ local_irq_save(flags);
+ ctrl = sci_in(port, SCSCR);
+ ctrl &= ~SCI_CTRL_FLAGS_TIE;
+ sci_out(port, SCSCR, ctrl);
+ local_irq_restore(flags);
+}
+
+static void sci_start_rx(struct uart_port *port, unsigned int tty_start)
+{
+ unsigned long flags;
+ unsigned short ctrl;
+
+ /* Set RIE (Receive Interrupt Enable) bit in SCSCR */
+ local_irq_save(flags);
+ ctrl = sci_in(port, SCSCR);
+ ctrl |= SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE;
+ sci_out(port, SCSCR, ctrl);
+ local_irq_restore(flags);
+}
+
+static void sci_stop_rx(struct uart_port *port)
+{
+ unsigned long flags;
+ unsigned short ctrl;
+
+ /* Clear RIE (Receive Interrupt Enable) bit in SCSCR */
+ local_irq_save(flags);
+ ctrl = sci_in(port, SCSCR);
+ ctrl &= ~(SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE);
+ sci_out(port, SCSCR, ctrl);
+ local_irq_restore(flags);
+}
+
+static void sci_enable_ms(struct uart_port *port)
+{
+ /* Nothing here yet .. */
+}
+
+static void sci_break_ctl(struct uart_port *port, int break_state)
+{
+ /* Nothing here yet .. */
+}
+
+static int sci_startup(struct uart_port *port)
+{
+ struct sci_port *s = &sci_ports[port->line];
+
+#if defined(__H8300S__)
+ h8300_sci_enable(port, sci_enable);
+#endif
+
+ sci_request_irq(s);
+ sci_start_tx(port, 1);
+ sci_start_rx(port, 1);
+
+ return 0;
+}
+
+static void sci_shutdown(struct uart_port *port)
+{
+ struct sci_port *s = &sci_ports[port->line];
+
+ sci_stop_rx(port);
+ sci_stop_tx(port, 1);
+ sci_free_irq(s);
+
+#if defined(__H8300S__)
+ h8300_sci_enable(port, sci_disable);
+#endif
+}
+
+static void sci_set_termios(struct uart_port *port, struct termios *termios,
+ struct termios *old)
+{
+ struct sci_port *s = &sci_ports[port->line];
+ unsigned int status, baud, smr_val;
+ unsigned long flags;
+ int t;
+
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ do {
+ status = sci_in(port, SCxSR);
+ } while (!(status & SCxSR_TEND(port)));
+
+ sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */
+
+#if !defined(SCI_ONLY)
+ if (port->type == PORT_SCIF) {
+ sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST);
+ }
+#endif
+
+ smr_val = sci_in(port, SCSMR) & 3;
+ if ((termios->c_cflag & CSIZE) == CS7)
+ smr_val |= 0x40;
+ if (termios->c_cflag & PARENB)
+ smr_val |= 0x20;
+ if (termios->c_cflag & PARODD)
+ smr_val |= 0x30;
+ if (termios->c_cflag & CSTOPB)
+ smr_val |= 0x08;
+
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ sci_out(port, SCSMR, smr_val);
+
+ switch (baud) {
+ case 0: t = -1; break;
+ case 2400: t = BPS_2400; break;
+ case 4800: t = BPS_4800; break;
+ case 9600: t = BPS_9600; break;
+ case 19200: t = BPS_19200; break;
+ case 38400: t = BPS_38400; break;
+ case 57600: t = BPS_57600; break;
+ case 115200: t = BPS_115200; break;
+ default: t = SCBRR_VALUE(baud); break;
+ }
+
+ if (t > 0) {
+ if(t >= 256) {
+ sci_out(port, SCSMR, (sci_in(port, SCSMR) & ~3) | 1);
+ t >>= 2;
+ } else {
+ sci_out(port, SCSMR, sci_in(port, SCSMR) & ~3);
+ }
+ sci_out(port, SCBRR, t);
+ udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */
+ }
+
+ s->init_pins(port, termios->c_cflag);
+ sci_out(port, SCSCR, SCSCR_INIT(port));
+
+ if ((termios->c_cflag & CREAD) != 0)
+ sci_start_rx(port,0);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *sci_type(struct uart_port *port)
+{
+ switch (port->type) {
+ case PORT_SCI: return "sci";
+ case PORT_SCIF: return "scif";
+ case PORT_IRDA: return "irda";
+ }
+
+ return 0;
+}
+
+static void sci_release_port(struct uart_port *port)
+{
+ /* Nothing here yet .. */
+}
+
+static int sci_request_port(struct uart_port *port)
+{
+ /* Nothing here yet .. */
+ return 0;
+}
+
+static void sci_config_port(struct uart_port *port, int flags)
+{
+ struct sci_port *s = &sci_ports[port->line];
+
+ port->type = s->type;
+
+#if defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
+ if (port->mapbase == 0)
+ port->mapbase = onchip_remap(SCIF_ADDR_SH5, 1024, "SCIF");
+
+ port->membase = (void *)port->mapbase;
+#endif
+}
+
+static int sci_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ struct sci_port *s = &sci_ports[port->line];
+
+ if (ser->irq != s->irqs[SCIx_TXI_IRQ] || ser->irq > NR_IRQS)
+ return -EINVAL;
+ if (ser->baud_base < 2400)
+ /* No paper tape reader for Mitch.. */
+ return -EINVAL;
+
+ return 0;
+}
+
+static struct uart_ops sci_uart_ops = {
+ .tx_empty = sci_tx_empty,
+ .set_mctrl = sci_set_mctrl,
+ .get_mctrl = sci_get_mctrl,
+ .start_tx = sci_start_tx,
+ .stop_tx = sci_stop_tx,
+ .stop_rx = sci_stop_rx,
+ .enable_ms = sci_enable_ms,
+ .break_ctl = sci_break_ctl,
+ .startup = sci_startup,
+ .shutdown = sci_shutdown,
+ .set_termios = sci_set_termios,
+ .type = sci_type,
+ .release_port = sci_release_port,
+ .request_port = sci_request_port,
+ .config_port = sci_config_port,
+ .verify_port = sci_verify_port,
+};
+
+static struct sci_port sci_ports[SCI_NPORTS] = {
+#if defined(CONFIG_CPU_SUBTYPE_SH7708)
+ {
+ .port = {
+ .membase = (void *)0xfffffe80,
+ .mapbase = 0xfffffe80,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 25,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 0,
+ },
+ .type = PORT_SCI,
+ .irqs = SCI_IRQS,
+ .init_pins = sci_init_pins_sci,
+ },
+#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
+ {
+ .port = {
+ .membase = (void *)SCIF0,
+ .mapbase = SCIF0,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 55,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 0,
+ },
+ .type = PORT_SCIF,
+ .irqs = SH3_IRDA_IRQS,
+ .init_pins = sci_init_pins_scif,
+ },
+ {
+ .port = {
+ .membase = (void *)SCIF2,
+ .mapbase = SCIF2,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 59,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 1,
+ },
+ .type = PORT_SCIF,
+ .irqs = SH3_SCIF_IRQS,
+ .init_pins = sci_init_pins_scif,
+ }
+#elif defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
+ {
+ .port = {
+ .membase = (void *)0xfffffe80,
+ .mapbase = 0xfffffe80,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 25,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 0,
+ },
+ .type = PORT_SCI,
+ .irqs = SCI_IRQS,
+ .init_pins = sci_init_pins_sci,
+ },
+ {
+ .port = {
+ .membase = (void *)0xa4000150,
+ .mapbase = 0xa4000150,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 59,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 1,
+ },
+ .type = PORT_SCIF,
+ .irqs = SH3_SCIF_IRQS,
+ .init_pins = sci_init_pins_scif,
+ },
+ {
+ .port = {
+ .membase = (void *)0xa4000140,
+ .mapbase = 0xa4000140,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 55,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 2,
+ },
+ .type = PORT_IRDA,
+ .irqs = SH3_IRDA_IRQS,
+ .init_pins = sci_init_pins_irda,
+ }
+#elif defined(CONFIG_CPU_SUBTYPE_SH7300)
+ {
+ .port = {
+ .membase = (void *)0xA4430000,
+ .mapbase = 0xA4430000,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 25,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 0,
+ },
+ .type = PORT_SCIF,
+ .irqs = SH7300_SCIF0_IRQS,
+ .init_pins = sci_init_pins_scif,
+ },
+#elif defined(CONFIG_CPU_SUBTYPE_SH73180)
+ {
+ .port = {
+ .membase = (void *)0xffe00000,
+ .mapbase = 0xffe00000,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 25,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 0,
+ },
+ .type = PORT_SCIF,
+ .irqs = SH73180_SCIF_IRQS,
+ .init_pins = sci_init_pins_scif,
+ },
+#elif defined(CONFIG_SH_RTS7751R2D)
+ {
+ .port = {
+ .membase = (void *)0xffe80000,
+ .mapbase = 0xffe80000,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 43,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 0,
+ },
+ .type = PORT_SCIF,
+ .irqs = SH4_SCIF_IRQS,
+ .init_pins = sci_init_pins_scif,
+ },
+#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751)
+ {
+ .port = {
+ .membase = (void *)0xffe00000,
+ .mapbase = 0xffe00000,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 25,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 0,
+ },
+ .type = PORT_SCI,
+ .irqs = SCI_IRQS,
+ .init_pins = sci_init_pins_sci,
+ },
+ {
+ .port = {
+ .membase = (void *)0xffe80000,
+ .mapbase = 0xffe80000,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 43,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 1,
+ },
+ .type = PORT_SCIF,
+ .irqs = SH4_SCIF_IRQS,
+ .init_pins = sci_init_pins_scif,
+ },
+#elif defined(CONFIG_CPU_SUBTYPE_SH7760)
+ {
+ .port = {
+ .membase = (void *)0xfe600000,
+ .mapbase = 0xfe600000,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 55,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 0,
+ },
+ .type = PORT_SCIF,
+ .irqs = SH7760_SCIF0_IRQS,
+ .init_pins = sci_init_pins_scif,
+ },
+ {
+ .port = {
+ .membase = (void *)0xfe610000,
+ .mapbase = 0xfe610000,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 75,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 1,
+ },
+ .type = PORT_SCIF,
+ .irqs = SH7760_SCIF1_IRQS,
+ .init_pins = sci_init_pins_scif,
+ },
+ {
+ .port = {
+ .membase = (void *)0xfe620000,
+ .mapbase = 0xfe620000,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 79,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 2,
+ },
+ .type = PORT_SCIF,
+ .irqs = SH7760_SCIF2_IRQS,
+ .init_pins = sci_init_pins_scif,
+ },
+#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
+ {
+ .port = {
+ .membase = (void *)0xffe80000,
+ .mapbase = 0xffe80000,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 43,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 0,
+ },
+ .type = PORT_SCIF,
+ .irqs = SH4_SCIF_IRQS,
+ .init_pins = sci_init_pins_scif,
+ },
+#elif defined(CONFIG_CPU_SUBTYPE_ST40STB1)
+ {
+ .port = {
+ .membase = (void *)0xffe00000,
+ .mapbase = 0xffe00000,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 26,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 0,
+ },
+ .type = PORT_SCIF,
+ .irqs = STB1_SCIF1_IRQS,
+ .init_pins = sci_init_pins_scif,
+ },
+ {
+ .port = {
+ .membase = (void *)0xffe80000,
+ .mapbase = 0xffe80000,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 43,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 1,
+ },
+ .type = PORT_SCIF,
+ .irqs = SH4_SCIF_IRQS,
+ .init_pins = sci_init_pins_scif,
+ },
+#elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
+ {
+ .port = {
+ .iotype = SERIAL_IO_MEM,
+ .irq = 42,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 0,
+ },
+ .type = PORT_SCIF,
+ .irqs = SH5_SCIF_IRQS,
+ .init_pins = sci_init_pins_scif,
+ },
+#elif defined(CONFIG_H83007) || defined(CONFIG_H83068)
+ {
+ .port = {
+ .membase = (void *)0x00ffffb0,
+ .mapbase = 0x00ffffb0,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 54,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 0,
+ },
+ .type = PORT_SCI,
+ .irqs = H8300H_SCI_IRQS0,
+ .init_pins = sci_init_pins_sci,
+ },
+ {
+ .port = {
+ .membase = (void *)0x00ffffb8,
+ .mapbase = 0x00ffffb8,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 58,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 1,
+ },
+ .type = PORT_SCI,
+ .irqs = H8300H_SCI_IRQS1,
+ .init_pins = sci_init_pins_sci,
+ },
+ {
+ .port = {
+ .membase = (void *)0x00ffffc0,
+ .mapbase = 0x00ffffc0,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 62,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 2,
+ },
+ .type = PORT_SCI,
+ .irqs = H8300H_SCI_IRQS2,
+ .init_pins = sci_init_pins_sci,
+ },
+#elif defined(CONFIG_H8S2678)
+ {
+ .port = {
+ .membase = (void *)0x00ffff78,
+ .mapbase = 0x00ffff78,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 90,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 0,
+ },
+ .type = PORT_SCI,
+ .irqs = H8S_SCI_IRQS0,
+ .init_pins = sci_init_pins_sci,
+ },
+ {
+ .port = {
+ .membase = (void *)0x00ffff80,
+ .mapbase = 0x00ffff80,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 94,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 1,
+ },
+ .type = PORT_SCI,
+ .irqs = H8S_SCI_IRQS1,
+ .init_pins = sci_init_pins_sci,
+ },
+ {
+ .port = {
+ .membase = (void *)0x00ffff88,
+ .mapbase = 0x00ffff88,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 98,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 2,
+ },
+ .type = PORT_SCI,
+ .irqs = H8S_SCI_IRQS2,
+ .init_pins = sci_init_pins_sci,
+ },
+#else
+#error "CPU subtype not defined"
+#endif
+};
+
+#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
+/*
+ * Print a string to the serial port trying not to disturb
+ * any possible real use of the port...
+ */
+static void serial_console_write(struct console *co, const char *s,
+ unsigned count)
+{
+ put_string(serial_console_port, s, count);
+}
+
+static int __init serial_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port;
+ int baud = 115200;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+ int ret;
+
+ if (co->index >= SCI_NPORTS)
+ co->index = 0;
+
+ serial_console_port = &sci_ports[co->index];
+ port = &serial_console_port->port;
+ port->type = serial_console_port->type;
+
+#ifdef CONFIG_SUPERH64
+ /* This is especially needed on sh64 to remap the SCIF */
+ sci_config_port(port, 0);
+#endif
+
+ /*
+ * We need to set the initial uartclk here, since otherwise it will
+ * only ever be setup at sci_init() time.
+ */
+#if !defined(__H8300H__) && !defined(__H8300S__)
+ port->uartclk = current_cpu_data.module_clock * 16;
+#else
+ port->uartclk = CONFIG_CPU_CLOCK;
+#endif
+#if defined(__H8300S__)
+ h8300_sci_enable(port, sci_enable);
+#endif
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ ret = uart_set_options(port, co, baud, parity, bits, flow);
+#if defined(__H8300H__) || defined(__H8300S__)
+ /* disable rx interrupt */
+ if (ret == 0)
+ sci_stop_rx(port);
+#endif
+ return ret;
+}
+
+static struct console serial_console = {
+ .name = "ttySC",
+ .device = uart_console_device,
+ .write = serial_console_write,
+ .setup = serial_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &sci_uart_driver,
+};
+
+static int __init sci_console_init(void)
+{
+ register_console(&serial_console);
+ return 0;
+}
+
+console_initcall(sci_console_init);
+#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
+
+#ifdef CONFIG_SH_KGDB
+/*
+ * FIXME: Most of this can go away.. at the moment, we rely on
+ * arch/sh/kernel/setup.c to do the command line parsing for kgdb, though
+ * most of that can easily be done here instead.
+ *
+ * For the time being, just accept the values that were parsed earlier..
+ */
+static void __init kgdb_console_get_options(struct uart_port *port, int *baud,
+ int *parity, int *bits)
+{
+ *baud = kgdb_baud;
+ *parity = tolower(kgdb_parity);
+ *bits = kgdb_bits - '0';
+}
+
+/*
+ * The naming here is somewhat misleading, since kgdb_console_setup() takes
+ * care of the early-on initialization for kgdb, regardless of whether we
+ * actually use kgdb as a console or not.
+ *
+ * On the plus side, this lets us kill off the old kgdb_sci_setup() nonsense.
+ */
+int __init kgdb_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port = &sci_ports[kgdb_portnum].port;
+ int baud = 38400;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ if (co->index >= SCI_NPORTS || co->index != kgdb_portnum)
+ co->index = kgdb_portnum;
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ else
+ kgdb_console_get_options(port, &baud, &parity, &bits);
+
+ kgdb_getchar = kgdb_sci_getchar;
+ kgdb_putchar = kgdb_sci_putchar;
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+#endif /* CONFIG_SH_KGDB */
+
+#ifdef CONFIG_SH_KGDB_CONSOLE
+static struct console kgdb_console = {
+ .name = "ttySC",
+ .write = kgdb_console_write,
+ .setup = kgdb_console_setup,
+ .flags = CON_PRINTBUFFER | CON_ENABLED,
+ .index = -1,
+ .data = &sci_uart_driver,
+};
+
+/* Register the KGDB console so we get messages (d'oh!) */
+static int __init kgdb_console_init(void)
+{
+ register_console(&kgdb_console);
+ return 0;
+}
+
+console_initcall(kgdb_console_init);
+#endif /* CONFIG_SH_KGDB_CONSOLE */
+
+#if defined(CONFIG_SH_KGDB_CONSOLE)
+#define SCI_CONSOLE &kgdb_console
+#elif defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
+#define SCI_CONSOLE &serial_console
+#else
+#define SCI_CONSOLE 0
+#endif
+
+static char banner[] __initdata =
+ KERN_INFO "SuperH SCI(F) driver initialized\n";
+
+static struct uart_driver sci_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = "sci",
+#ifdef CONFIG_DEVFS_FS
+ .devfs_name = "ttsc/",
+#endif
+ .dev_name = "ttySC",
+ .major = SCI_MAJOR,
+ .minor = SCI_MINOR_START,
+ .nr = SCI_NPORTS,
+ .cons = SCI_CONSOLE,
+};
+
+static int __init sci_init(void)
+{
+ int chan, ret;
+
+ printk("%s", banner);
+
+ ret = uart_register_driver(&sci_uart_driver);
+ if (ret == 0) {
+ for (chan = 0; chan < SCI_NPORTS; chan++) {
+ struct sci_port *sciport = &sci_ports[chan];
+
+#if !defined(__H8300H__) && !defined(__H8300S__)
+ sciport->port.uartclk = (current_cpu_data.module_clock * 16);
+#else
+ sciport->port.uartclk = CONFIG_CPU_CLOCK;
+#endif
+ uart_add_one_port(&sci_uart_driver, &sciport->port);
+ sciport->break_timer.data = (unsigned long)sciport;
+ sciport->break_timer.function = sci_break_timer;
+ init_timer(&sciport->break_timer);
+ }
+ }
+
+#ifdef CONFIG_CPU_FREQ
+ cpufreq_register_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER);
+ printk("sci: CPU frequency notifier registered\n");
+#endif
+
+#ifdef CONFIG_SH_STANDARD_BIOS
+ sh_bios_gdb_detach();
+#endif
+
+ return ret;
+}
+
+static void __exit sci_exit(void)
+{
+ int chan;
+
+ for (chan = 0; chan < SCI_NPORTS; chan++)
+ uart_remove_one_port(&sci_uart_driver, &sci_ports[chan].port);
+
+ uart_unregister_driver(&sci_uart_driver);
+}
+
+module_init(sci_init);
+module_exit(sci_exit);
+