Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/usb/serial/kl5kusb105.h b/drivers/usb/serial/kl5kusb105.h
new file mode 100644
index 0000000..1231d9e
--- /dev/null
+++ b/drivers/usb/serial/kl5kusb105.h
@@ -0,0 +1,69 @@
+/*
+ * Definitions for the KLSI KL5KUSB105 serial port adapter
+ */
+
+/* vendor/product pairs that are known to contain this chipset */
+#define PALMCONNECT_VID 0x0830
+#define PALMCONNECT_PID 0x0080
+
+#define KLSI_VID 0x05e9
+#define KLSI_KL5KUSB105D_PID 0x00c0
+
+/* Vendor commands: */
+
+
+/* port table -- the chip supports up to 4 channels */
+
+/* baud rates */
+
+enum {
+ kl5kusb105a_sio_b115200 = 0,
+ kl5kusb105a_sio_b57600 = 1,
+ kl5kusb105a_sio_b38400 = 2,
+ kl5kusb105a_sio_b19200 = 4,
+ kl5kusb105a_sio_b14400 = 5,
+ kl5kusb105a_sio_b9600 = 6,
+ kl5kusb105a_sio_b4800 = 8, /* unchecked */
+ kl5kusb105a_sio_b2400 = 9, /* unchecked */
+ kl5kusb105a_sio_b1200 = 0xa, /* unchecked */
+ kl5kusb105a_sio_b600 = 0xb /* unchecked */
+};
+
+/* data bits */
+#define kl5kusb105a_dtb_7 7
+#define kl5kusb105a_dtb_8 8
+
+
+
+/* requests: */
+#define KL5KUSB105A_SIO_SET_DATA 1
+#define KL5KUSB105A_SIO_POLL 2
+#define KL5KUSB105A_SIO_CONFIGURE 3
+/* values used for request KL5KUSB105A_SIO_CONFIGURE */
+#define KL5KUSB105A_SIO_CONFIGURE_READ_ON 3
+#define KL5KUSB105A_SIO_CONFIGURE_READ_OFF 2
+
+/* Interpretation of modem status lines */
+/* These need sorting out by individually connecting pins and checking
+ * results. FIXME!
+ * When data is being sent we see 0x30 in the lower byte; this must
+ * contain DSR and CTS ...
+ */
+#define KL5KUSB105A_DSR ((1<<4) | (1<<5))
+#define KL5KUSB105A_CTS ((1<<5) | (1<<4))
+
+#define KL5KUSB105A_WANTS_TO_SEND 0x30
+//#define KL5KUSB105A_DTR /* Data Terminal Ready */
+//#define KL5KUSB105A_CTS /* Clear To Send */
+//#define KL5KUSB105A_CD /* Carrier Detect */
+//#define KL5KUSB105A_DSR /* Data Set Ready */
+//#define KL5KUSB105A_RxD /* Receive pin */
+
+//#define KL5KUSB105A_LE
+//#define KL5KUSB105A_RTS
+//#define KL5KUSB105A_ST
+//#define KL5KUSB105A_SR
+//#define KL5KUSB105A_RI /* Ring Indicator */
+
+/* vim: set ts=8 sts=8: */
+