Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/usb/serial/kobil_sct.h b/drivers/usb/serial/kobil_sct.h
new file mode 100644
index 0000000..a51fbb5
--- /dev/null
+++ b/drivers/usb/serial/kobil_sct.h
@@ -0,0 +1,60 @@
+#define SUSBCRequest_SetBaudRateParityAndStopBits 1
+#define SUSBCR_SBR_MASK 0xFF00
+#define SUSBCR_SBR_1200 0x0100
+#define SUSBCR_SBR_9600 0x0200
+#define SUSBCR_SBR_19200 0x0400
+#define SUSBCR_SBR_28800 0x0800
+#define SUSBCR_SBR_38400 0x1000
+#define SUSBCR_SBR_57600 0x2000
+#define SUSBCR_SBR_115200 0x4000
+
+#define SUSBCR_SPASB_MASK 0x0070
+#define SUSBCR_SPASB_NoParity 0x0010
+#define SUSBCR_SPASB_OddParity 0x0020
+#define SUSBCR_SPASB_EvenParity 0x0040
+
+#define SUSBCR_SPASB_STPMASK 0x0003
+#define SUSBCR_SPASB_1StopBit 0x0001
+#define SUSBCR_SPASB_2StopBits 0x0002
+
+#define SUSBCRequest_SetStatusLinesOrQueues 2
+#define SUSBCR_SSL_SETRTS 0x0001
+#define SUSBCR_SSL_CLRRTS 0x0002
+#define SUSBCR_SSL_SETDTR 0x0004
+#define SUSBCR_SSL_CLRDTR 0x0010
+
+#define SUSBCR_SSL_PURGE_TXABORT 0x0100 // Kill the pending/current writes to the comm port.
+#define SUSBCR_SSL_PURGE_RXABORT 0x0200 // Kill the pending/current reads to the comm port.
+#define SUSBCR_SSL_PURGE_TXCLEAR 0x0400 // Kill the transmit queue if there.
+#define SUSBCR_SSL_PURGE_RXCLEAR 0x0800 // Kill the typeahead buffer if there.
+
+#define SUSBCRequest_GetStatusLineState 4
+#define SUSBCR_GSL_RXCHAR 0x0001 // Any Character received
+#define SUSBCR_GSL_TXEMPTY 0x0004 // Transmitt Queue Empty
+#define SUSBCR_GSL_CTS 0x0008 // CTS changed state
+#define SUSBCR_GSL_DSR 0x0010 // DSR changed state
+#define SUSBCR_GSL_RLSD 0x0020 // RLSD changed state
+#define SUSBCR_GSL_BREAK 0x0040 // BREAK received
+#define SUSBCR_GSL_ERR 0x0080 // Line status error occurred
+#define SUSBCR_GSL_RING 0x0100 // Ring signal detected
+
+#define SUSBCRequest_Misc 8
+#define SUSBCR_MSC_ResetReader 0x0001 // use a predefined reset sequence
+#define SUSBCR_MSC_ResetAllQueues 0x0002 // use a predefined sequence to reset the internal queues
+
+#define SUSBCRequest_GetMisc 0x10
+#define SUSBCR_MSC_GetFWVersion 0x0001 /* get the firmware version from device,
+ coded like this 0xHHLLBBPP
+ with HH = Firmware Version High Byte
+ LL = Firmware Version Low Byte
+ BB = Build Number
+ PP = Further Attributes
+ */
+
+#define SUSBCR_MSC_GetHWVersion 0x0002 /* get the hardware version from device
+ coded like this 0xHHLLPPRR
+ with HH = Software Version High Byte
+ LL = Software Version Low Byte
+ PP = Further Attributes
+ RR = Reserved for the hardware ID
+ */