Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
new file mode 100644
index 0000000..d53f777
--- /dev/null
+++ b/drivers/usb/storage/unusual_devs.h
@@ -0,0 +1,986 @@
+/* Driver for USB Mass Storage compliant devices
+ * Ununsual Devices File
+ *
+ * $Id: unusual_devs.h,v 1.32 2002/02/25 02:41:24 mdharm Exp $
+ *
+ * Current development and maintenance by:
+ * (c) 2000-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
+ *
+ * Initial work by:
+ * (c) 2000 Adam J. Richter (adam@yggdrasil.com), Yggdrasil Computing, Inc.
+ *
+ * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
+ * information about this driver.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* IMPORTANT NOTE: This file must be included in another file which does
+ * the following thing for it to work:
+ * The macro UNUSUAL_DEV() must be defined before this file is included
+ */
+#include <linux/config.h>
+
+/* If you edit this file, please try to keep it sorted first by VendorID,
+ * then by ProductID.
+ *
+ * If you want to add an entry for this file, be sure to include the
+ * following information:
+ * - a patch that adds the entry for your device, including your
+ * email address right above the entry (plus maybe a brief
+ * explanation of the reason for the entry),
+ * - a copy of /proc/bus/usb/devices with your device plugged in
+ * running with this patch.
+ * Send your submission to either Phil Dibowitz <phil@ipom.com> or
+ * Alan Stern <stern@rowland.harvard.edu>, and don't forget to CC: the
+ * USB development list <linux-usb-devel@lists.sourceforge.net>.
+ */
+
+UNUSUAL_DEV( 0x03ee, 0x6901, 0x0000, 0x0100,
+ "Mitsumi",
+ "USB FDD",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_SINGLE_LUN ),
+
+UNUSUAL_DEV( 0x03f0, 0x0107, 0x0200, 0x0200,
+ "HP",
+ "CD-Writer+",
+ US_SC_8070, US_PR_CB, NULL, 0),
+
+#ifdef CONFIG_USB_STORAGE_USBAT
+UNUSUAL_DEV( 0x03f0, 0x0207, 0x0001, 0x0001,
+ "HP",
+ "CD-Writer+ 8200e",
+ US_SC_8070, US_PR_SCM_ATAPI, init_usbat, 0),
+
+UNUSUAL_DEV( 0x03f0, 0x0307, 0x0001, 0x0001,
+ "HP",
+ "CD-Writer+ CD-4e",
+ US_SC_8070, US_PR_SCM_ATAPI, init_usbat, 0),
+#endif
+
+/* Deduced by Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
+ * Entry needed for flags: US_FL_FIX_INQUIRY because initial inquiry message
+ * always fails and confuses drive.
+ */
+UNUSUAL_DEV( 0x0411, 0x001c, 0x0113, 0x0113,
+ "Buffalo",
+ "DUB-P40G HDD",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_INQUIRY ),
+
+#ifdef CONFIG_USB_STORAGE_DPCM
+UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100,
+ "Microtech",
+ "CameraMate (DPCM_USB)",
+ US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ),
+#endif
+
+/* Patch submitted by Philipp Friedrich <philipp@void.at> */
+UNUSUAL_DEV( 0x0482, 0x0100, 0x0100, 0x0100,
+ "Kyocera",
+ "Finecam S3x",
+ US_SC_8070, US_PR_CB, NULL, US_FL_FIX_INQUIRY),
+
+/* Patch submitted by Philipp Friedrich <philipp@void.at> */
+UNUSUAL_DEV( 0x0482, 0x0101, 0x0100, 0x0100,
+ "Kyocera",
+ "Finecam S4",
+ US_SC_8070, US_PR_CB, NULL, US_FL_FIX_INQUIRY),
+
+/* Patch submitted by Stephane Galles <stephane.galles@free.fr> */
+UNUSUAL_DEV( 0x0482, 0x0103, 0x0100, 0x0100,
+ "Kyocera",
+ "Finecam S5",
+ US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
+
+/* Patch for Kyocera Finecam L3
+ * Submitted by Michael Krauth <michael.krauth@web.de>
+ * and Alessandro Fracchetti <al.fracchetti@tin.it>
+ */
+UNUSUAL_DEV( 0x0482, 0x0105, 0x0100, 0x0100,
+ "Kyocera",
+ "Finecam L3",
+ US_SC_SCSI, US_PR_BULK, NULL,
+ US_FL_FIX_INQUIRY),
+
+/* Reported by Paul Stewart <stewart@wetlogic.net>
+ * This entry is needed because the device reports Sub=ff */
+UNUSUAL_DEV( 0x04a4, 0x0004, 0x0001, 0x0001,
+ "Hitachi",
+ "DVD-CAM DZ-MV100A Camcorder",
+ US_SC_SCSI, US_PR_CB, NULL, US_FL_SINGLE_LUN),
+
+/* Reported by Andreas Bockhold <andreas@bockionline.de> */
+UNUSUAL_DEV( 0x04b0, 0x0405, 0x0100, 0x0100,
+ "NIKON",
+ "NIKON DSC D70",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY),
+
+/* BENQ DC5330
+ * Reported by Manuel Fombuena <mfombuena@ya.com> and
+ * Frank Copeland <fjc@thingy.apana.org.au> */
+UNUSUAL_DEV( 0x04a5, 0x3010, 0x0100, 0x0100,
+ "Tekom Technologies, Inc",
+ "300_CAMERA",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Simon Levitt <simon@whattf.com>
+ * This entry needs Sub and Proto fields */
+UNUSUAL_DEV( 0x04b8, 0x0601, 0x0100, 0x0100,
+ "Epson",
+ "875DC Storage",
+ US_SC_SCSI, US_PR_CB, NULL, US_FL_FIX_INQUIRY),
+
+/* Reported by Khalid Aziz <khalid@gonehiking.org>
+ * This entry is needed because the device reports Sub=ff */
+UNUSUAL_DEV( 0x04b8, 0x0602, 0x0110, 0x0110,
+ "Epson",
+ "785EPX Storage",
+ US_SC_SCSI, US_PR_BULK, NULL, US_FL_SINGLE_LUN),
+
+/* Not sure who reported this originally but
+ * Pavel Machek <pavel@ucw.cz> reported that the extra US_FL_SINGLE_LUN
+ * flag be added */
+UNUSUAL_DEV( 0x04cb, 0x0100, 0x0000, 0x2210,
+ "Fujifilm",
+ "FinePix 1400Zoom",
+ US_SC_UFI, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_SINGLE_LUN),
+
+/* Reported by Peter Wächtler <pwaechtler@loewe-komp.de>
+ * The device needs the flags only.
+ */
+UNUSUAL_DEV( 0x04ce, 0x0002, 0x0074, 0x0074,
+ "ScanLogic",
+ "SL11R-IDE",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_INQUIRY),
+
+/* Reported by Kriston Fincher <kriston@airmail.net>
+ * Patch submitted by Sean Millichamp <sean@bruenor.org>
+ * This is to support the Panasonic PalmCam PV-SD4090
+ * This entry is needed because the device reports Sub=ff
+ */
+UNUSUAL_DEV( 0x04da, 0x0901, 0x0100, 0x0200,
+ "Panasonic",
+ "LS-120 Camera",
+ US_SC_UFI, US_PR_DEVICE, NULL, 0),
+
+/* From Yukihiro Nakai, via zaitcev@yahoo.com.
+ * This is needed for CB instead of CBI */
+UNUSUAL_DEV( 0x04da, 0x0d05, 0x0000, 0x0000,
+ "Sharp CE-CW05",
+ "CD-R/RW Drive",
+ US_SC_8070, US_PR_CB, NULL, 0),
+
+/* Reported by Adriaan Penning <a.penning@luon.net> */
+UNUSUAL_DEV( 0x04da, 0x2372, 0x0000, 0x9999,
+ "Panasonic",
+ "DMC-LCx Camera",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
+
+/* Most of the following entries were developed with the help of
+ * Shuttle/SCM directly.
+ */
+UNUSUAL_DEV( 0x04e6, 0x0001, 0x0200, 0x0200,
+ "Matshita",
+ "LS-120",
+ US_SC_8020, US_PR_CB, NULL, 0),
+
+UNUSUAL_DEV( 0x04e6, 0x0002, 0x0100, 0x0100,
+ "Shuttle",
+ "eUSCSI Bridge",
+ US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
+#ifdef CONFIG_USB_STORAGE_SDDR09
+UNUSUAL_DEV( 0x04e6, 0x0003, 0x0000, 0x9999,
+ "Sandisk",
+ "ImageMate SDDR09",
+ US_SC_SCSI, US_PR_EUSB_SDDR09, NULL,
+ US_FL_SINGLE_LUN ),
+
+/* This entry is from Andries.Brouwer@cwi.nl */
+UNUSUAL_DEV( 0x04e6, 0x0005, 0x0100, 0x0208,
+ "SCM Microsystems",
+ "eUSB SmartMedia / CompactFlash Adapter",
+ US_SC_SCSI, US_PR_DPCM_USB, sddr09_init,
+ 0),
+#endif
+
+/* Reported by Markus Demleitner <msdemlei@cl.uni-heidelberg.de> */
+UNUSUAL_DEV( 0x04e6, 0x0006, 0x0100, 0x0100,
+ "SCM Microsystems Inc.",
+ "eUSB MMC Adapter",
+ US_SC_SCSI, US_PR_CB, NULL,
+ US_FL_SINGLE_LUN),
+
+/* Reported by Daniel Nouri <dpunktnpunkt@web.de> */
+UNUSUAL_DEV( 0x04e6, 0x0006, 0x0205, 0x0205,
+ "Shuttle",
+ "eUSB MMC Adapter",
+ US_SC_SCSI, US_PR_DEVICE, NULL,
+ US_FL_SINGLE_LUN),
+
+UNUSUAL_DEV( 0x04e6, 0x0007, 0x0100, 0x0200,
+ "Sony",
+ "Hifd",
+ US_SC_SCSI, US_PR_CB, NULL,
+ US_FL_SINGLE_LUN),
+
+UNUSUAL_DEV( 0x04e6, 0x0009, 0x0200, 0x0200,
+ "Shuttle",
+ "eUSB ATA/ATAPI Adapter",
+ US_SC_8020, US_PR_CB, NULL, 0),
+
+UNUSUAL_DEV( 0x04e6, 0x000a, 0x0200, 0x0200,
+ "Shuttle",
+ "eUSB CompactFlash Adapter",
+ US_SC_8020, US_PR_CB, NULL, 0),
+
+UNUSUAL_DEV( 0x04e6, 0x000B, 0x0100, 0x0100,
+ "Shuttle",
+ "eUSCSI Bridge",
+ US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
+UNUSUAL_DEV( 0x04e6, 0x000C, 0x0100, 0x0100,
+ "Shuttle",
+ "eUSCSI Bridge",
+ US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
+UNUSUAL_DEV( 0x04e6, 0x0101, 0x0200, 0x0200,
+ "Shuttle",
+ "CD-RW Device",
+ US_SC_8020, US_PR_CB, NULL, 0),
+
+/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
+ * Device uses standards-violating 32-byte Bulk Command Block Wrappers and
+ * reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011.
+ */
+
+UNUSUAL_DEV( 0x04fc, 0x80c2, 0x0100, 0x0100,
+ "Kobian Mercury",
+ "Binocam DCB-132",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_BULK32),
+
+#ifdef CONFIG_USB_STORAGE_USBAT
+UNUSUAL_DEV( 0x04e6, 0x1010, 0x0000, 0x9999,
+ "SCM",
+ "SCM USBAT-02",
+ US_SC_SCSI, US_PR_SCM_ATAPI, init_usbat,
+ US_FL_SINGLE_LUN),
+#endif
+
+/* Reported by Bob Sass <rls@vectordb.com> -- only rev 1.33 tested */
+UNUSUAL_DEV( 0x050d, 0x0115, 0x0133, 0x0133,
+ "Belkin",
+ "USB SCSI Adaptor",
+ US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
+/* Iomega Clik! Drive
+ * Reported by David Chatenay <dchatenay@hotmail.com>
+ * The reason this is needed is not fully known.
+ */
+UNUSUAL_DEV( 0x0525, 0xa140, 0x0100, 0x0100,
+ "Iomega",
+ "USB Clik! 40",
+ US_SC_8070, US_PR_BULK, NULL,
+ US_FL_FIX_INQUIRY ),
+
+/* Yakumo Mega Image 37
+ * Submitted by Stephan Fuhrmann <atomenergie@t-online.de> */
+UNUSUAL_DEV( 0x052b, 0x1801, 0x0100, 0x0100,
+ "Tekom Technologies, Inc",
+ "300_CAMERA",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
+/* Another Yakumo camera.
+ * Reported by Michele Alzetta <michele.alzetta@aliceposta.it> */
+UNUSUAL_DEV( 0x052b, 0x1804, 0x0100, 0x0100,
+ "Tekom Technologies, Inc",
+ "300_CAMERA",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Iacopo Spalletti <avvisi@spalletti.it> */
+UNUSUAL_DEV( 0x052b, 0x1807, 0x0100, 0x0100,
+ "Tekom Technologies, Inc",
+ "300_CAMERA",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
+/* Yakumo Mega Image 47
+ * Reported by Bjoern Paetzel <kolrabi@kolrabi.de> */
+UNUSUAL_DEV( 0x052b, 0x1905, 0x0100, 0x0100,
+ "Tekom Technologies, Inc",
+ "400_CAMERA",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Paul Ortyl <ortylp@3miasto.net>
+ * Note that it's similar to the device above, only different prodID */
+UNUSUAL_DEV( 0x052b, 0x1911, 0x0100, 0x0100,
+ "Tekom Technologies, Inc",
+ "400_CAMERA",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
+UNUSUAL_DEV( 0x054c, 0x0010, 0x0106, 0x0450,
+ "Sony",
+ "DSC-S30/S70/S75/505V/F505/F707/F717/P8",
+ US_SC_SCSI, US_PR_DEVICE, NULL,
+ US_FL_SINGLE_LUN | US_FL_NOT_LOCKABLE | US_FL_NO_WP_DETECT ),
+
+/* This entry is needed because the device reports Sub=ff */
+UNUSUAL_DEV( 0x054c, 0x0010, 0x0500, 0x0500,
+ "Sony",
+ "DSC-T1",
+ US_SC_8070, US_PR_DEVICE, NULL,
+ US_FL_SINGLE_LUN ),
+
+
+/* Reported by wim@geeks.nl */
+UNUSUAL_DEV( 0x054c, 0x0025, 0x0100, 0x0100,
+ "Sony",
+ "Memorystick NW-MS7",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_SINGLE_LUN ),
+
+#ifdef CONFIG_USB_STORAGE_ISD200
+UNUSUAL_DEV( 0x054c, 0x002b, 0x0100, 0x0110,
+ "Sony",
+ "Portable USB Harddrive V2",
+ US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+ 0 ),
+#endif
+
+/* Submitted by Olaf Hering, <olh@suse.de> SuSE Bugzilla #49049 */
+UNUSUAL_DEV( 0x054c, 0x002c, 0x0501, 0x0501,
+ "Sony",
+ "USB Floppy Drive",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_SINGLE_LUN ),
+
+UNUSUAL_DEV( 0x054c, 0x002d, 0x0100, 0x0100,
+ "Sony",
+ "Memorystick MSAC-US1",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_SINGLE_LUN ),
+
+/* Submitted by Klaus Mueller <k.mueller@intershop.de> */
+UNUSUAL_DEV( 0x054c, 0x002e, 0x0106, 0x0310,
+ "Sony",
+ "Handycam",
+ US_SC_SCSI, US_PR_DEVICE, NULL,
+ US_FL_SINGLE_LUN ),
+
+/* Submitted by Rajesh Kumble Nayak <nayak@obs-nice.fr> */
+UNUSUAL_DEV( 0x054c, 0x002e, 0x0500, 0x0500,
+ "Sony",
+ "Handycam HC-85",
+ US_SC_UFI, US_PR_DEVICE, NULL,
+ US_FL_SINGLE_LUN ),
+
+UNUSUAL_DEV( 0x054c, 0x0032, 0x0000, 0x9999,
+ "Sony",
+ "Memorystick MSC-U01N",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_SINGLE_LUN ),
+
+/* Submitted by Michal Mlotek <mlotek@foobar.pl> */
+UNUSUAL_DEV( 0x054c, 0x0058, 0x0000, 0x9999,
+ "Sony",
+ "PEG N760c Memorystick",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_INQUIRY ),
+
+UNUSUAL_DEV( 0x054c, 0x0069, 0x0000, 0x9999,
+ "Sony",
+ "Memorystick MSC-U03",
+ US_SC_UFI, US_PR_CB, NULL,
+ US_FL_SINGLE_LUN ),
+
+/* Submitted by Nathan Babb <nathan@lexi.com> */
+UNUSUAL_DEV( 0x054c, 0x006d, 0x0000, 0x9999,
+ "Sony",
+ "PEG Mass Storage",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_INQUIRY ),
+
+/* Submitted by Mike Alborn <malborn@deandra.homeip.net> */
+UNUSUAL_DEV( 0x054c, 0x016a, 0x0000, 0x9999,
+ "Sony",
+ "PEG Mass Storage",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_INQUIRY ),
+
+/* Submitted by Frank Engel <frankie@cse.unsw.edu.au> */
+UNUSUAL_DEV( 0x054c, 0x0099, 0x0000, 0x9999,
+ "Sony",
+ "PEG Mass Storage",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_INQUIRY ),
+
+
+UNUSUAL_DEV( 0x057b, 0x0000, 0x0000, 0x0299,
+ "Y-E Data",
+ "Flashbuster-U",
+ US_SC_DEVICE, US_PR_CB, NULL,
+ US_FL_SINGLE_LUN),
+
+UNUSUAL_DEV( 0x057b, 0x0000, 0x0300, 0x9999,
+ "Y-E Data",
+ "Flashbuster-U",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_SINGLE_LUN),
+
+/* Reported by Johann Cardon <johann.cardon@free.fr>
+ * This entry is needed only because the device reports
+ * bInterfaceClass = 0xff (vendor-specific)
+ */
+UNUSUAL_DEV( 0x057b, 0x0022, 0x0000, 0x9999,
+ "Y-E Data",
+ "Silicon Media R/W",
+ US_SC_DEVICE, US_PR_DEVICE, NULL, 0),
+
+/* Fabrizio Fellini <fello@libero.it> */
+UNUSUAL_DEV( 0x0595, 0x4343, 0x0000, 0x2210,
+ "Fujifilm",
+ "Digital Camera EX-20 DSC",
+ US_SC_8070, US_PR_DEVICE, NULL, 0 ),
+
+/* The entry was here before I took over, and had US_SC_RBC. It turns
+ * out that isn't needed. Additionally, Torsten Eriksson
+ * <Torsten.Eriksson@bergianska.se> is able to use his device fine
+ * without this entry at all - but I don't suspect that will be true
+ * for all users (the protocol is likely needed), so is staying at
+ * this time. - Phil Dibowitz <phil@ipom.com>
+ */
+UNUSUAL_DEV( 0x059f, 0xa601, 0x0200, 0x0200,
+ "LaCie",
+ "USB Hard Disk",
+ US_SC_DEVICE, US_PR_CB, NULL, 0 ),
+
+/* Submitted by Joel Bourquard <numlock@freesurf.ch>
+ * Some versions of this device need the SubClass and Protocol overrides
+ * while others don't.
+ */
+UNUSUAL_DEV( 0x05ab, 0x0060, 0x1104, 0x1110,
+ "In-System",
+ "PyroGate External CD-ROM Enclosure (FCD-523)",
+ US_SC_SCSI, US_PR_BULK, NULL,
+ US_FL_NEED_OVERRIDE ),
+
+#ifdef CONFIG_USB_STORAGE_ISD200
+UNUSUAL_DEV( 0x05ab, 0x0031, 0x0100, 0x0110,
+ "In-System",
+ "USB/IDE Bridge (ATA/ATAPI)",
+ US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+ 0 ),
+
+UNUSUAL_DEV( 0x05ab, 0x0301, 0x0100, 0x0110,
+ "In-System",
+ "Portable USB Harddrive V2",
+ US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+ 0 ),
+
+UNUSUAL_DEV( 0x05ab, 0x0351, 0x0100, 0x0110,
+ "In-System",
+ "Portable USB Harddrive V2",
+ US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+ 0 ),
+
+UNUSUAL_DEV( 0x05ab, 0x5701, 0x0100, 0x0110,
+ "In-System",
+ "USB Storage Adapter V2",
+ US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+ 0 ),
+#endif
+
+/* Reported by Avi Kivity <avi@argo.co.il> */
+UNUSUAL_DEV( 0x05ac, 0x1203, 0x0001, 0x0001,
+ "Apple",
+ "iPod",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
+UNUSUAL_DEV( 0x05ac, 0x1205, 0x0001, 0x0001,
+ "Apple",
+ "iPod",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
+#ifdef CONFIG_USB_STORAGE_JUMPSHOT
+UNUSUAL_DEV( 0x05dc, 0x0001, 0x0000, 0x0001,
+ "Lexar",
+ "Jumpshot USB CF Reader",
+ US_SC_SCSI, US_PR_JUMPSHOT, NULL,
+ US_FL_NEED_OVERRIDE ),
+#endif
+
+/* Reported by Blake Matheny <bmatheny@purdue.edu> */
+UNUSUAL_DEV( 0x05dc, 0xb002, 0x0000, 0x0113,
+ "Lexar",
+ "USB CF Reader",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_INQUIRY ),
+
+/* The following two entries are for a Genesys USB to IDE
+ * converter chip, but it changes its ProductId depending
+ * on whether or not a disk or an optical device is enclosed
+ * They were originally reported by Alexander Oltu
+ * <alexander@all-2.com> and Peter Marks <peter.marks@turner.com>
+ * respectively.
+ */
+UNUSUAL_DEV( 0x05e3, 0x0701, 0x0000, 0xffff,
+ "Genesys Logic",
+ "USB to IDE Optical",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_GO_SLOW ),
+
+UNUSUAL_DEV( 0x05e3, 0x0702, 0x0000, 0xffff,
+ "Genesys Logic",
+ "USB to IDE Disk",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_GO_SLOW ),
+
+/* Reported by Hanno Boeck <hanno@gmx.de>
+ * Taken from the Lycoris Kernel */
+UNUSUAL_DEV( 0x0636, 0x0003, 0x0000, 0x9999,
+ "Vivitar",
+ "Vivicam 35Xx",
+ US_SC_SCSI, US_PR_BULK, NULL,
+ US_FL_FIX_INQUIRY ),
+
+UNUSUAL_DEV( 0x0644, 0x0000, 0x0100, 0x0100,
+ "TEAC",
+ "Floppy Drive",
+ US_SC_UFI, US_PR_CB, NULL, 0 ),
+
+#ifdef CONFIG_USB_STORAGE_SDDR09
+UNUSUAL_DEV( 0x066b, 0x0105, 0x0100, 0x0100,
+ "Olympus",
+ "Camedia MAUSB-2",
+ US_SC_SCSI, US_PR_EUSB_SDDR09, NULL,
+ US_FL_SINGLE_LUN ),
+#endif
+
+/* Reported by Darsen Lu <darsen@micro.ee.nthu.edu.tw> */
+UNUSUAL_DEV( 0x066f, 0x8000, 0x0001, 0x0001,
+ "SigmaTel",
+ "USBMSC Audio Player",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
+/* Reported by Richard -=[]=- <micro_flyer@hotmail.com> */
+UNUSUAL_DEV( 0x067b, 0x2507, 0x0100, 0x0100,
+ "Prolific Technology Inc.",
+ "Mass Storage Device",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY | US_FL_GO_SLOW ),
+
+/* Reported by Alex Butcher <alex.butcher@assursys.co.uk> */
+UNUSUAL_DEV( 0x067b, 0x3507, 0x0001, 0x0001,
+ "Prolific Technology Inc.",
+ "ATAPI-6 Bridge Controller",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY | US_FL_GO_SLOW ),
+
+/* Submitted by Benny Sjostrand <benny@hostmobility.com> */
+UNUSUAL_DEV( 0x0686, 0x4011, 0x0001, 0x0001,
+ "Minolta",
+ "Dimage F300",
+ US_SC_SCSI, US_PR_BULK, NULL, 0 ),
+
+/* Reported by Miguel A. Fosas <amn3s1a@ono.com> */
+UNUSUAL_DEV( 0x0686, 0x4017, 0x0001, 0x0001,
+ "Minolta",
+ "DIMAGE E223",
+ US_SC_SCSI, US_PR_DEVICE, NULL, 0 ),
+
+UNUSUAL_DEV( 0x0693, 0x0002, 0x0100, 0x0100,
+ "Hagiwara",
+ "FlashGate SmartMedia",
+ US_SC_SCSI, US_PR_BULK, NULL, 0 ),
+
+UNUSUAL_DEV( 0x0693, 0x0005, 0x0100, 0x0100,
+ "Hagiwara",
+ "Flashgate",
+ US_SC_SCSI, US_PR_BULK, NULL, 0 ),
+
+UNUSUAL_DEV( 0x0781, 0x0001, 0x0200, 0x0200,
+ "Sandisk",
+ "ImageMate SDDR-05a",
+ US_SC_SCSI, US_PR_CB, NULL,
+ US_FL_SINGLE_LUN ),
+
+UNUSUAL_DEV( 0x0781, 0x0100, 0x0100, 0x0100,
+ "Sandisk",
+ "ImageMate SDDR-12",
+ US_SC_SCSI, US_PR_CB, NULL,
+ US_FL_SINGLE_LUN ),
+
+#ifdef CONFIG_USB_STORAGE_SDDR09
+UNUSUAL_DEV( 0x0781, 0x0200, 0x0000, 0x9999,
+ "Sandisk",
+ "ImageMate SDDR-09",
+ US_SC_SCSI, US_PR_EUSB_SDDR09, NULL,
+ US_FL_SINGLE_LUN ),
+#endif
+
+#ifdef CONFIG_USB_STORAGE_FREECOM
+UNUSUAL_DEV( 0x07ab, 0xfc01, 0x0000, 0x9999,
+ "Freecom",
+ "USB-IDE",
+ US_SC_QIC, US_PR_FREECOM, freecom_init, 0),
+#endif
+
+/* Reported by Eero Volotinen <eero@ping-viini.org> */
+UNUSUAL_DEV( 0x07ab, 0xfccd, 0x0406, 0x0406,
+ "Freecom Technologies",
+ "FHD-Classic",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY),
+
+UNUSUAL_DEV( 0x07af, 0x0004, 0x0100, 0x0133,
+ "Microtech",
+ "USB-SCSI-DB25",
+ US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
+UNUSUAL_DEV( 0x07af, 0x0005, 0x0100, 0x0100,
+ "Microtech",
+ "USB-SCSI-HD50",
+ US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
+#ifdef CONFIG_USB_STORAGE_DPCM
+UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100,
+ "Microtech",
+ "CameraMate (DPCM_USB)",
+ US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ),
+#endif
+
+#ifdef CONFIG_USB_STORAGE_DATAFAB
+UNUSUAL_DEV( 0x07c4, 0xa000, 0x0000, 0x0015,
+ "Datafab",
+ "MDCFE-B USB CF Reader",
+ US_SC_SCSI, US_PR_DATAFAB, NULL,
+ 0 ),
+
+/*
+ * The following Datafab-based devices may or may not work
+ * using the current driver...the 0xffff is arbitrary since I
+ * don't know what device versions exist for these guys.
+ *
+ * The 0xa003 and 0xa004 devices in particular I'm curious about.
+ * I'm told they exist but so far nobody has come forward to say that
+ * they work with this driver. Given the success we've had getting
+ * other Datafab-based cards operational with this driver, I've decided
+ * to leave these two devices in the list.
+ */
+UNUSUAL_DEV( 0x07c4, 0xa001, 0x0000, 0xffff,
+ "SIIG/Datafab",
+ "SIIG/Datafab Memory Stick+CF Reader/Writer",
+ US_SC_SCSI, US_PR_DATAFAB, NULL,
+ 0 ),
+
+/* Reported by Josef Reisinger <josef.reisinger@netcologne.de> */
+UNUSUAL_DEV( 0x07c4, 0xa002, 0x0000, 0xffff,
+ "Datafab/Unknown",
+ "MD2/MD3 Disk enclosure",
+ US_SC_SCSI, US_PR_DATAFAB, NULL,
+ US_FL_SINGLE_LUN ),
+
+UNUSUAL_DEV( 0x07c4, 0xa003, 0x0000, 0xffff,
+ "Datafab/Unknown",
+ "Datafab-based Reader",
+ US_SC_SCSI, US_PR_DATAFAB, NULL,
+ 0 ),
+
+UNUSUAL_DEV( 0x07c4, 0xa004, 0x0000, 0xffff,
+ "Datafab/Unknown",
+ "Datafab-based Reader",
+ US_SC_SCSI, US_PR_DATAFAB, NULL,
+ 0 ),
+
+UNUSUAL_DEV( 0x07c4, 0xa005, 0x0000, 0xffff,
+ "PNY/Datafab",
+ "PNY/Datafab CF+SM Reader",
+ US_SC_SCSI, US_PR_DATAFAB, NULL,
+ 0 ),
+
+UNUSUAL_DEV( 0x07c4, 0xa006, 0x0000, 0xffff,
+ "Simple Tech/Datafab",
+ "Simple Tech/Datafab CF+SM Reader",
+ US_SC_SCSI, US_PR_DATAFAB, NULL,
+ 0 ),
+#endif
+
+#ifdef CONFIG_USB_STORAGE_SDDR55
+/* Contributed by Peter Waechtler */
+UNUSUAL_DEV( 0x07c4, 0xa103, 0x0000, 0x9999,
+ "Datafab",
+ "MDSM-B reader",
+ US_SC_SCSI, US_PR_SDDR55, NULL,
+ US_FL_FIX_INQUIRY ),
+#endif
+
+#ifdef CONFIG_USB_STORAGE_DATAFAB
+/* Submitted by Olaf Hering <olh@suse.de> */
+UNUSUAL_DEV( 0x07c4, 0xa109, 0x0000, 0xffff,
+ "Datafab Systems, Inc.",
+ "USB to CF + SM Combo (LC1)",
+ US_SC_SCSI, US_PR_DATAFAB, NULL,
+ 0 ),
+#endif
+#ifdef CONFIG_USB_STORAGE_SDDR55
+/* SM part - aeb <Andries.Brouwer@cwi.nl> */
+UNUSUAL_DEV( 0x07c4, 0xa109, 0x0000, 0xffff,
+ "Datafab Systems, Inc.",
+ "USB to CF + SM Combo (LC1)",
+ US_SC_SCSI, US_PR_SDDR55, NULL,
+ US_FL_SINGLE_LUN ),
+#endif
+
+/* Datafab KECF-USB / Sagatek DCS-CF / Simpletech Flashlink UCF-100
+ * Only revision 1.13 tested (same for all of the above devices,
+ * based on the Datafab DF-UG-07 chip). Needed for US_FL_FIX_INQUIRY.
+ * Submitted by Marek Michalkiewicz <marekm@amelek.gda.pl>.
+ * See also http://martin.wilck.bei.t-online.de/#kecf .
+ */
+UNUSUAL_DEV( 0x07c4, 0xa400, 0x0000, 0xffff,
+ "Datafab",
+ "KECF-USB",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_INQUIRY ),
+
+/* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant
+ * to the USB storage specification in two ways:
+ * - They tell us they are using transport protocol CBI. In reality they
+ * are using transport protocol CB.
+ * - They don't like the INQUIRY command. So we must handle this command
+ * of the SCSI layer ourselves.
+ * - Some cameras with idProduct=0x1001 and bcdDevice=0x1000 have
+ * bInterfaceProtocol=0x00 (US_PR_CBI) while others have 0x01 (US_PR_CB).
+ * So don't remove the US_PR_CB override!
+ * - Cameras with bcdDevice=0x9009 require the US_SC_8070 override.
+ */
+UNUSUAL_DEV( 0x07cf, 0x1001, 0x1000, 0x9999,
+ "Casio",
+ "QV DigitalCamera",
+ US_SC_8070, US_PR_CB, NULL,
+ US_FL_NEED_OVERRIDE | US_FL_FIX_INQUIRY ),
+
+/* Submitted by Hartmut Wahl <hwahl@hwahl.de>*/
+UNUSUAL_DEV( 0x0839, 0x000a, 0x0001, 0x0001,
+ "Samsung",
+ "Digimax 410",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_INQUIRY),
+
+/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
+ * Flag will support Bulk devices which use a standards-violating 32-byte
+ * Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with
+ * Grandtech GT892x chip, which request "Proprietary SCSI Bulk" support.
+ */
+
+UNUSUAL_DEV( 0x084d, 0x0011, 0x0110, 0x0110,
+ "Grandtech",
+ "DC2MEGA",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_BULK32),
+
+
+/* Entry needed for flags. Moreover, all devices with this ID use
+ * bulk-only transport, but _some_ falsely report Control/Bulk instead.
+ * One example is "Trumpion Digital Research MYMP3".
+ * Submitted by Bjoern Brill <brill(at)fs.math.uni-frankfurt.de>
+ */
+UNUSUAL_DEV( 0x090a, 0x1001, 0x0100, 0x0100,
+ "Trumpion",
+ "t33520 USB Flash Card Controller",
+ US_SC_DEVICE, US_PR_BULK, NULL,
+ US_FL_NEED_OVERRIDE ),
+
+/* Trumpion Microelectronics MP3 player (felipe_alfaro@linuxmail.org) */
+UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999,
+ "Trumpion",
+ "MP3 player",
+ US_SC_RBC, US_PR_BULK, NULL,
+ 0 ),
+
+/* aeb */
+UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
+ "Feiya",
+ "5-in-1 Card Reader",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
+/* This Pentax still camera is not conformant
+ * to the USB storage specification: -
+ * - It does not like the INQUIRY command. So we must handle this command
+ * of the SCSI layer ourselves.
+ * Tested on Rev. 10.00 (0x1000)
+ * Submitted by James Courtier-Dutton <James@superbug.demon.co.uk>
+ */
+UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000,
+ "Pentax",
+ "Optio 2/3/400",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_INQUIRY ),
+
+
+/* Submitted by Per Winkvist <per.winkvist@uk.com> */
+UNUSUAL_DEV( 0x0a17, 0x006, 0x0000, 0xffff,
+ "Pentax",
+ "Optio S/S4",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_INQUIRY ),
+
+#ifdef CONFIG_USB_STORAGE_ISD200
+UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110,
+ "ATI",
+ "USB Cable 205",
+ US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+ 0 ),
+#endif
+
+#ifdef CONFIG_USB_STORAGE_DATAFAB
+UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
+ "Acomdata",
+ "CF",
+ US_SC_SCSI, US_PR_DATAFAB, NULL,
+ US_FL_SINGLE_LUN ),
+#endif
+#ifdef CONFIG_USB_STORAGE_SDDR55
+UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
+ "Acomdata",
+ "SM",
+ US_SC_SCSI, US_PR_SDDR55, NULL,
+ US_FL_SINGLE_LUN ),
+#endif
+
+/* Submitted by Joris Struyve <joris@struyve.be> */
+UNUSUAL_DEV( 0x0d96, 0x410a, 0x0001, 0xffff,
+ "Medion",
+ "MD 7425",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_INQUIRY),
+
+/*
+ * Entry for Jenoptik JD 5200z3
+ *
+ * email: car.busse@gmx.de
+ */
+UNUSUAL_DEV( 0x0d96, 0x5200, 0x0001, 0x0200,
+ "Jenoptik",
+ "JD 5200 z3",
+ US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
+
+/* Reported by Lubomir Blaha <tritol@trilogic.cz>
+ * I _REALLY_ don't know what 3rd, 4th number and all defines mean, but this
+ * works for me. Can anybody correct these values? (I able to test corrected
+ * version.)
+ */
+UNUSUAL_DEV( 0x0dd8, 0x1060, 0x0000, 0xffff,
+ "Netac",
+ "USB-CF-Card",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_INQUIRY ),
+
+/* Patch by Stephan Walter <stephan.walter@epfl.ch>
+ * I don't know why, but it works... */
+UNUSUAL_DEV( 0x0dda, 0x0001, 0x0012, 0x0012,
+ "WINWARD",
+ "Music Disk",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Ian McConnell <ian at emit.demon.co.uk> */
+UNUSUAL_DEV( 0x0dda, 0x0301, 0x0012, 0x0012,
+ "PNP_MP3",
+ "PNP_MP3 PLAYER",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
+/* Submitted by Antoine Mairesse <antoine.mairesse@free.fr> */
+UNUSUAL_DEV( 0x0ed1, 0x6660, 0x0100, 0x0300,
+ "USB",
+ "Solid state disk",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_INQUIRY ),
+
+/* Submitted by Daniel Drake <dsd@gentoo.org>
+ * Reported by dayul on the Gentoo Forums */
+UNUSUAL_DEV( 0x0ea0, 0x2168, 0x0110, 0x0110,
+ "Ours Technology",
+ "Flash Disk",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Rastislav Stanik <rs_kernel@yahoo.com> */
+UNUSUAL_DEV( 0x0ea0, 0x6828, 0x0110, 0x0110,
+ "USB",
+ "Flash Disk",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Michael Stattmann <michael@stattmann.com> */
+UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000,
+ "Sony Ericsson",
+ "V800-Vodafone 802",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_NO_WP_DETECT ),
+
+/* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
+ * Tested on hardware version 1.10.
+ * Entry is needed only for the initializer function override.
+ */
+UNUSUAL_DEV( 0x1019, 0x0c55, 0x0000, 0x9999,
+ "Desknote",
+ "UCR-61S2B",
+ US_SC_DEVICE, US_PR_DEVICE, usb_stor_ucr61s2b_init,
+ 0 ),
+
+/* Reported by Kotrla Vitezslav <kotrla@ceb.cz> */
+UNUSUAL_DEV( 0x1370, 0x6828, 0x0110, 0x0110,
+ "SWISSBIT",
+ "Black Silver",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Radovan Garabik <garabik@kassiopeia.juls.savba.sk> */
+UNUSUAL_DEV( 0x2735, 0x100b, 0x0000, 0x9999,
+ "MPIO",
+ "HS200",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_GO_SLOW ),
+
+#ifdef CONFIG_USB_STORAGE_SDDR55
+UNUSUAL_DEV( 0x55aa, 0xa103, 0x0000, 0x9999,
+ "Sandisk",
+ "ImageMate SDDR55",
+ US_SC_SCSI, US_PR_SDDR55, NULL,
+ US_FL_SINGLE_LUN),
+#endif