Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/include/asm-arm26/floppy.h b/include/asm-arm26/floppy.h
new file mode 100644
index 0000000..9e090ad
--- /dev/null
+++ b/include/asm-arm26/floppy.h
@@ -0,0 +1,141 @@
+/*
+ * linux/include/asm-arm/floppy.h
+ *
+ * Copyright (C) 1996-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Note that we don't touch FLOPPY_DMA nor FLOPPY_IRQ here
+ */
+#ifndef __ASM_ARM_FLOPPY_H
+#define __ASM_ARM_FLOPPY_H
+
+#define fd_outb(val,port) \
+ do { \
+ if ((port) == FD_DOR) \
+ fd_setdor((val)); \
+ else \
+ outb((val),(port)); \
+ } while(0)
+
+#define fd_inb(port) inb((port))
+#define fd_request_irq() request_irq(IRQ_FLOPPYDISK,floppy_interrupt,\
+ SA_INTERRUPT|SA_SAMPLE_RANDOM,"floppy",NULL)
+#define fd_free_irq() free_irq(IRQ_FLOPPYDISK,NULL)
+#define fd_disable_irq() disable_irq(IRQ_FLOPPYDISK)
+#define fd_enable_irq() enable_irq(IRQ_FLOPPYDISK)
+
+#define fd_request_dma() request_dma(DMA_FLOPPY,"floppy")
+#define fd_free_dma() free_dma(DMA_FLOPPY)
+#define fd_disable_dma() disable_dma(DMA_FLOPPY)
+#define fd_enable_dma() enable_dma(DMA_FLOPPY)
+#define fd_clear_dma_ff() clear_dma_ff(DMA_FLOPPY)
+#define fd_set_dma_mode(mode) set_dma_mode(DMA_FLOPPY, (mode))
+#define fd_set_dma_addr(addr) set_dma_addr(DMA_FLOPPY, virt_to_bus((addr)))
+#define fd_set_dma_count(len) set_dma_count(DMA_FLOPPY, (len))
+#define fd_cacheflush(addr,sz)
+
+/* need to clean up dma.h */
+#define DMA_FLOPPYDISK DMA_FLOPPY
+
+/* Floppy_selects is the list of DOR's to select drive fd
+ *
+ * On initialisation, the floppy list is scanned, and the drives allocated
+ * in the order that they are found. This is done by seeking the drive
+ * to a non-zero track, and then restoring it to track 0. If an error occurs,
+ * then there is no floppy drive present. [to be put back in again]
+ */
+static unsigned char floppy_selects[2][4] =
+{
+ { 0x10, 0x21, 0x23, 0x33 },
+ { 0x10, 0x21, 0x23, 0x33 }
+};
+
+#define fd_setdor(dor) \
+do { \
+ int new_dor = (dor); \
+ if (new_dor & 0xf0) \
+ new_dor = (new_dor & 0x0c) | floppy_selects[fdc][new_dor & 3]; \
+ else \
+ new_dor &= 0x0c; \
+ outb(new_dor, FD_DOR); \
+} while (0)
+
+/*
+ * Someday, we'll automatically detect which drives are present...
+ */
+static inline void fd_scandrives (void)
+{
+#if 0
+ int floppy, drive_count;
+
+ fd_disable_irq();
+ raw_cmd = &default_raw_cmd;
+ raw_cmd->flags = FD_RAW_SPIN | FD_RAW_NEED_SEEK;
+ raw_cmd->track = 0;
+ raw_cmd->rate = ?;
+ drive_count = 0;
+ for (floppy = 0; floppy < 4; floppy ++) {
+ current_drive = drive_count;
+ /*
+ * Turn on floppy motor
+ */
+ if (start_motor(redo_fd_request))
+ continue;
+ /*
+ * Set up FDC
+ */
+ fdc_specify();
+ /*
+ * Tell FDC to recalibrate
+ */
+ output_byte(FD_RECALIBRATE);
+ LAST_OUT(UNIT(floppy));
+ /* wait for command to complete */
+ if (!successful) {
+ int i;
+ for (i = drive_count; i < 3; i--)
+ floppy_selects[fdc][i] = floppy_selects[fdc][i + 1];
+ floppy_selects[fdc][3] = 0;
+ floppy -= 1;
+ } else
+ drive_count++;
+ }
+#else
+ floppy_selects[0][0] = 0x10;
+ floppy_selects[0][1] = 0x21;
+ floppy_selects[0][2] = 0x23;
+ floppy_selects[0][3] = 0x33;
+#endif
+}
+
+#define FDC1 (0x3f0)
+
+#define FLOPPY0_TYPE 4
+#define FLOPPY1_TYPE 4
+
+#define N_FDC 1
+#define N_DRIVE 4
+
+#define FLOPPY_MOTOR_MASK 0xf0
+
+#define CROSS_64KB(a,s) (0)
+
+/*
+ * This allows people to reverse the order of
+ * fd0 and fd1, in case their hardware is
+ * strangely connected (as some RiscPCs
+ * and A5000s seem to be).
+ */
+static void driveswap(int *ints, int dummy, int dummy2)
+{
+ floppy_selects[0][0] ^= floppy_selects[0][1];
+ floppy_selects[0][1] ^= floppy_selects[0][0];
+ floppy_selects[0][0] ^= floppy_selects[0][1];
+}
+
+#define EXTRA_FLOPPY_PARAMS ,{ "driveswap", &driveswap, NULL, 0, 0 }
+
+#endif