diff --git a/include/asm-v850/fpga85e2c.h b/include/asm-v850/fpga85e2c.h
new file mode 100644
index 0000000..d32f045
--- /dev/null
+++ b/include/asm-v850/fpga85e2c.h
@@ -0,0 +1,88 @@
+/*
+ * include/asm-v850/fpga85e2c.h -- Machine-dependent defs for
+ *	FPGA implementation of V850E2/NA85E2C
+ *
+ *  Copyright (C) 2002,03  NEC Electronics Corporation
+ *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_FPGA85E2C_H__
+#define __V850_FPGA85E2C_H__
+
+#include <asm/v850e2.h>
+#include <asm/clinkage.h>
+
+
+#define CPU_MODEL	"v850e2/fpga85e2c"
+#define CPU_MODEL_LONG	"NEC V850E2/NA85E2C"
+#define PLATFORM	"fpga85e2c"
+#define PLATFORM_LONG	"NA85E2C FPGA implementation"
+
+
+/* `external ram'.  */
+#define ERAM_ADDR		0
+#define ERAM_SIZE		0x00100000 /* 1MB */
+
+
+/* FPGA specific control registers.  */
+
+/* Writing a non-zero value to FLGREG(0) will signal the controlling CPU
+   to stop execution.  */
+#define FLGREG_ADDR(n)		(0xFFE80100 + 2*(n))
+#define FLGREG(n)		(*(volatile unsigned char *)FLGREG_ADDR (n))
+#define FLGREG_NUM		2
+
+#define CSDEV_ADDR(n)		(0xFFE80110 + 2*(n))
+#define CSDEV(n)		(*(volatile unsigned char *)CSDEV_ADDR (n))
+
+
+/* Timer interrupts 0-3, interrupt at intervals from CLK/4096 to CLK/16384.  */
+#define IRQ_RPU(n)		(60 + (n))
+#define IRQ_RPU_NUM		4
+
+/* For <asm/irq.h> */
+#define NUM_CPU_IRQS		64
+
+
+/* General-purpose timer.  */
+/* control/status register (can only be read/written via bit insns) */
+#define RPU_GTMC_ADDR		0xFFFFFB00
+#define RPU_GTMC		(*(volatile unsigned char *)RPU_GTMC_ADDR)
+#define RPU_GTMC_CE_BIT		7 /* clock enable (control) */
+#define RPU_GTMC_OV_BIT		6 /* overflow (status) */
+#define RPU_GTMC_CLK_BIT	1 /* 0 = .5 MHz CLK, 1 = 1 Mhz (control) */
+/* 32-bit count (8 least-significant bits are always zero).  */
+#define RPU_GTM_ADDR		0xFFFFFB28
+#define RPU_GTM			(*(volatile unsigned long *)RPU_GTMC_ADDR)
+
+
+/* For <asm/page.h> */
+#define PAGE_OFFSET		ERAM_ADDR /* minimum allocatable address */
+
+
+/* For <asm/entry.h> */
+/* `R0 RAM', used for a few miscellaneous variables that must be accessible
+   using a load instruction relative to R0.  The FPGA implementation
+   actually has no on-chip RAM, so we use part of main ram just after the
+   interrupt vectors.  */
+#ifdef __ASSEMBLY__
+#define R0_RAM_ADDR		lo(C_SYMBOL_NAME(_r0_ram))
+#else
+extern char _r0_ram;
+#define R0_RAM_ADDR		((unsigned long)&_r0_ram);
+#endif
+
+
+/* For <asm/param.h> */
+#ifndef HZ
+#define HZ			122 /* actually, 8.192ms ticks =~ 122.07 */
+#endif
+
+
+#endif /* __V850_FPGA85E2C_H__ */