Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
diff --git a/include/net/irda/ircomm_param.h b/include/net/irda/ircomm_param.h
new file mode 100644
index 0000000..e667880
--- /dev/null
+++ b/include/net/irda/ircomm_param.h
@@ -0,0 +1,149 @@
+/*********************************************************************
+ *                
+ * Filename:      ircomm_param.h
+ * Version:       1.0
+ * Description:   Parameter handling for the IrCOMM protocol
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Mon Jun  7 08:47:28 1999
+ * Modified at:   Wed Aug 25 13:46:33 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1999 Dag Brattli, All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *     
+ ********************************************************************/
+
+#ifndef IRCOMM_PARAMS_H
+#define IRCOMM_PARAMS_H
+
+#include <net/irda/parameters.h>
+
+/* Parameters common to all service types */
+#define IRCOMM_SERVICE_TYPE     0x00
+#define IRCOMM_PORT_TYPE        0x01 /* Only used in LM-IAS */
+#define IRCOMM_PORT_NAME        0x02 /* Only used in LM-IAS */
+
+/* Parameters for both 3 wire and 9 wire */
+#define IRCOMM_DATA_RATE        0x10
+#define IRCOMM_DATA_FORMAT      0x11
+#define IRCOMM_FLOW_CONTROL     0x12
+#define IRCOMM_XON_XOFF         0x13
+#define IRCOMM_ENQ_ACK          0x14
+#define IRCOMM_LINE_STATUS      0x15
+#define IRCOMM_BREAK            0x16
+
+/* Parameters for 9 wire */
+#define IRCOMM_DTE              0x20
+#define IRCOMM_DCE              0x21
+#define IRCOMM_POLL             0x22
+
+/* Service type (details) */
+#define IRCOMM_3_WIRE_RAW       0x01
+#define IRCOMM_3_WIRE           0x02
+#define IRCOMM_9_WIRE           0x04
+#define IRCOMM_CENTRONICS       0x08
+
+/* Port type (details) */
+#define IRCOMM_SERIAL           0x00
+#define IRCOMM_PARALLEL         0x01
+
+/* Data format (details) */
+#define IRCOMM_WSIZE_5          0x00
+#define IRCOMM_WSIZE_6          0x01
+#define IRCOMM_WSIZE_7          0x02
+#define IRCOMM_WSIZE_8          0x03
+
+#define IRCOMM_1_STOP_BIT       0x00
+#define IRCOMM_2_STOP_BIT       0x04 /* 1.5 if char len 5 */
+
+#define IRCOMM_PARITY_DISABLE   0x00
+#define IRCOMM_PARITY_ENABLE    0x08
+
+#define IRCOMM_PARITY_ODD       0x00
+#define IRCOMM_PARITY_EVEN      0x10
+#define IRCOMM_PARITY_MARK      0x20
+#define IRCOMM_PARITY_SPACE     0x30
+
+/* Flow control */
+#define IRCOMM_XON_XOFF_IN      0x01
+#define IRCOMM_XON_XOFF_OUT     0x02
+#define IRCOMM_RTS_CTS_IN       0x04
+#define IRCOMM_RTS_CTS_OUT      0x08
+#define IRCOMM_DSR_DTR_IN       0x10
+#define IRCOMM_DSR_DTR_OUT      0x20
+#define IRCOMM_ENQ_ACK_IN       0x40
+#define IRCOMM_ENQ_ACK_OUT      0x80
+
+/* Line status */
+#define IRCOMM_OVERRUN_ERROR    0x02
+#define IRCOMM_PARITY_ERROR     0x04
+#define IRCOMM_FRAMING_ERROR    0x08
+
+/* DTE (Data terminal equipment) line settings */
+#define IRCOMM_DELTA_DTR        0x01
+#define IRCOMM_DELTA_RTS        0x02
+#define IRCOMM_DTR              0x04
+#define IRCOMM_RTS              0x08
+
+/* DCE (Data communications equipment) line settings */
+#define IRCOMM_DELTA_CTS        0x01  /* Clear to send has changed */
+#define IRCOMM_DELTA_DSR        0x02  /* Data set ready has changed */
+#define IRCOMM_DELTA_RI         0x04  /* Ring indicator has changed */
+#define IRCOMM_DELTA_CD         0x08  /* Carrier detect has changed */
+#define IRCOMM_CTS              0x10  /* Clear to send is high */
+#define IRCOMM_DSR              0x20  /* Data set ready is high */
+#define IRCOMM_RI               0x40  /* Ring indicator is high */
+#define IRCOMM_CD               0x80  /* Carrier detect is high */
+#define IRCOMM_DCE_DELTA_ANY    0x0f
+
+/*
+ * Parameter state
+ */
+struct ircomm_params {
+	/* General control params */
+	__u8  service_type;
+	__u8  port_type;
+	char  port_name[32];
+
+	/* Control params for 3- and 9-wire service type */
+	__u32 data_rate;         /* Data rate in bps */
+	__u8  data_format;
+	__u8  flow_control;
+	char  xonxoff[2];
+	char  enqack[2];
+	__u8  line_status;
+	__u8  _break;
+
+	__u8  null_modem;
+
+	/* Control params for 9-wire service type */
+	__u8 dte;
+	__u8 dce;
+	__u8 poll;
+
+	/* Control params for Centronics service type */
+};
+
+struct ircomm_tty_cb; /* Forward decl. */
+
+int ircomm_param_request(struct ircomm_tty_cb *self, __u8 pi, int flush);
+
+extern pi_param_info_t ircomm_param_info;
+
+#endif /* IRCOMM_PARAMS_H */
+