Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/net/Kconfig b/net/Kconfig
new file mode 100644
index 0000000..9251b28
--- /dev/null
+++ b/net/Kconfig
@@ -0,0 +1,646 @@
+#
+# Network configuration
+#
+
+menu "Networking support"
+
+config NET
+ bool "Networking support"
+ ---help---
+ Unless you really know what you are doing, you should say Y here.
+ The reason is that some programs need kernel networking support even
+ when running on a stand-alone machine that isn't connected to any
+ other computer. If you are upgrading from an older kernel, you
+ should consider updating your networking tools too because changes
+ in the kernel and the tools often go hand in hand. The tools are
+ contained in the package net-tools, the location and version number
+ of which are given in <file:Documentation/Changes>.
+
+ For a general introduction to Linux networking, it is highly
+ recommended to read the NET-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+menu "Networking options"
+ depends on NET
+
+config PACKET
+ tristate "Packet socket"
+ ---help---
+ The Packet protocol is used by applications which communicate
+ directly with network devices without an intermediate network
+ protocol implemented in the kernel, e.g. tcpdump. If you want them
+ to work, choose Y.
+
+ To compile this driver as a module, choose M here: the module will
+ be called af_packet.
+
+ If unsure, say Y.
+
+config PACKET_MMAP
+ bool "Packet socket: mmapped IO"
+ depends on PACKET
+ help
+ If you say Y here, the Packet protocol driver will use an IO
+ mechanism that results in faster communication.
+
+ If unsure, say N.
+
+config UNIX
+ tristate "Unix domain sockets"
+ ---help---
+ If you say Y here, you will include support for Unix domain sockets;
+ sockets are the standard Unix mechanism for establishing and
+ accessing network connections. Many commonly used programs such as
+ the X Window system and syslog use these sockets even if your
+ machine is not connected to any network. Unless you are working on
+ an embedded system or something similar, you therefore definitely
+ want to say Y here.
+
+ To compile this driver as a module, choose M here: the module will be
+ called unix. Note that several important services won't work
+ correctly if you say M here and then neglect to load the module.
+
+ Say Y unless you know what you are doing.
+
+config NET_KEY
+ tristate "PF_KEY sockets"
+ select XFRM
+ ---help---
+ PF_KEYv2 socket family, compatible to KAME ones.
+ They are required if you are going to use IPsec tools ported
+ from KAME.
+
+ Say Y unless you know what you are doing.
+
+config INET
+ bool "TCP/IP networking"
+ ---help---
+ These are the protocols used on the Internet and on most local
+ Ethernets. It is highly recommended to say Y here (this will enlarge
+ your kernel by about 144 KB), since some programs (e.g. the X window
+ system) use TCP/IP even if your machine is not connected to any
+ other computer. You will get the so-called loopback device which
+ allows you to ping yourself (great fun, that!).
+
+ For an excellent introduction to Linux networking, please read the
+ Linux Networking HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ If you say Y here and also to "/proc file system support" and
+ "Sysctl support" below, you can change various aspects of the
+ behavior of the TCP/IP code by writing to the (virtual) files in
+ /proc/sys/net/ipv4/*; the options are explained in the file
+ <file:Documentation/networking/ip-sysctl.txt>.
+
+ Short answer: say Y.
+
+source "net/ipv4/Kconfig"
+
+# IPv6 as module will cause a CRASH if you try to unload it
+config IPV6
+ tristate "The IPv6 protocol"
+ depends on INET
+ default m
+ select CRYPTO if IPV6_PRIVACY
+ select CRYPTO_MD5 if IPV6_PRIVACY
+ ---help---
+ This is complemental support for the IP version 6.
+ You will still be able to do traditional IPv4 networking as well.
+
+ For general information about IPv6, see
+ <http://playground.sun.com/pub/ipng/html/ipng-main.html>.
+ For Linux IPv6 development information, see <http://www.linux-ipv6.org>.
+ For specific information about IPv6 under Linux, read the HOWTO at
+ <http://www.bieringer.de/linux/IPv6/>.
+
+ To compile this protocol support as a module, choose M here: the
+ module will be called ipv6.
+
+source "net/ipv6/Kconfig"
+
+menuconfig NETFILTER
+ bool "Network packet filtering (replaces ipchains)"
+ ---help---
+ Netfilter is a framework for filtering and mangling network packets
+ that pass through your Linux box.
+
+ The most common use of packet filtering is to run your Linux box as
+ a firewall protecting a local network from the Internet. The type of
+ firewall provided by this kernel support is called a "packet
+ filter", which means that it can reject individual network packets
+ based on type, source, destination etc. The other kind of firewall,
+ a "proxy-based" one, is more secure but more intrusive and more
+ bothersome to set up; it inspects the network traffic much more
+ closely, modifies it and has knowledge about the higher level
+ protocols, which a packet filter lacks. Moreover, proxy-based
+ firewalls often require changes to the programs running on the local
+ clients. Proxy-based firewalls don't need support by the kernel, but
+ they are often combined with a packet filter, which only works if
+ you say Y here.
+
+ You should also say Y here if you intend to use your Linux box as
+ the gateway to the Internet for a local network of machines without
+ globally valid IP addresses. This is called "masquerading": if one
+ of the computers on your local network wants to send something to
+ the outside, your box can "masquerade" as that computer, i.e. it
+ forwards the traffic to the intended outside destination, but
+ modifies the packets to make it look like they came from the
+ firewall box itself. It works both ways: if the outside host
+ replies, the Linux box will silently forward the traffic to the
+ correct local computer. This way, the computers on your local net
+ are completely invisible to the outside world, even though they can
+ reach the outside and can receive replies. It is even possible to
+ run globally visible servers from within a masqueraded local network
+ using a mechanism called portforwarding. Masquerading is also often
+ called NAT (Network Address Translation).
+
+ Another use of Netfilter is in transparent proxying: if a machine on
+ the local network tries to connect to an outside host, your Linux
+ box can transparently forward the traffic to a local server,
+ typically a caching proxy server.
+
+ Yet another use of Netfilter is building a bridging firewall. Using
+ a bridge with Network packet filtering enabled makes iptables "see"
+ the bridged traffic. For filtering on the lower network and Ethernet
+ protocols over the bridge, use ebtables (under bridge netfilter
+ configuration).
+
+ Various modules exist for netfilter which replace the previous
+ masquerading (ipmasqadm), packet filtering (ipchains), transparent
+ proxying, and portforwarding mechanisms. Please see
+ <file:Documentation/Changes> under "iptables" for the location of
+ these packages.
+
+ Make sure to say N to "Fast switching" below if you intend to say Y
+ here, as Fast switching currently bypasses netfilter.
+
+ Chances are that you should say Y here if you compile a kernel which
+ will run as a router and N for regular hosts. If unsure, say N.
+
+if NETFILTER
+
+config NETFILTER_DEBUG
+ bool "Network packet filtering debugging"
+ depends on NETFILTER
+ help
+ You can say Y here if you want to get additional messages useful in
+ debugging the netfilter code.
+
+config BRIDGE_NETFILTER
+ bool "Bridged IP/ARP packets filtering"
+ depends on BRIDGE && NETFILTER && INET
+ default y
+ ---help---
+ Enabling this option will let arptables resp. iptables see bridged
+ ARP resp. IP traffic. If you want a bridging firewall, you probably
+ want this option enabled.
+ Enabling or disabling this option doesn't enable or disable
+ ebtables.
+
+ If unsure, say N.
+
+source "net/ipv4/netfilter/Kconfig"
+source "net/ipv6/netfilter/Kconfig"
+source "net/decnet/netfilter/Kconfig"
+source "net/bridge/netfilter/Kconfig"
+
+endif
+
+config XFRM
+ bool
+ depends on NET
+
+source "net/xfrm/Kconfig"
+
+source "net/sctp/Kconfig"
+
+config ATM
+ tristate "Asynchronous Transfer Mode (ATM) (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ ---help---
+ ATM is a high-speed networking technology for Local Area Networks
+ and Wide Area Networks. It uses a fixed packet size and is
+ connection oriented, allowing for the negotiation of minimum
+ bandwidth requirements.
+
+ In order to participate in an ATM network, your Linux box needs an
+ ATM networking card. If you have that, say Y here and to the driver
+ of your ATM card below.
+
+ Note that you need a set of user-space programs to actually make use
+ of ATM. See the file <file:Documentation/networking/atm.txt> for
+ further details.
+
+config ATM_CLIP
+ tristate "Classical IP over ATM (EXPERIMENTAL)"
+ depends on ATM && INET
+ help
+ Classical IP over ATM for PVCs and SVCs, supporting InARP and
+ ATMARP. If you want to communication with other IP hosts on your ATM
+ network, you will typically either say Y here or to "LAN Emulation
+ (LANE)" below.
+
+config ATM_CLIP_NO_ICMP
+ bool "Do NOT send ICMP if no neighbour (EXPERIMENTAL)"
+ depends on ATM_CLIP
+ help
+ Normally, an "ICMP host unreachable" message is sent if a neighbour
+ cannot be reached because there is no VC to it in the kernel's
+ ATMARP table. This may cause problems when ATMARP table entries are
+ briefly removed during revalidation. If you say Y here, packets to
+ such neighbours are silently discarded instead.
+
+config ATM_LANE
+ tristate "LAN Emulation (LANE) support (EXPERIMENTAL)"
+ depends on ATM
+ help
+ LAN Emulation emulates services of existing LANs across an ATM
+ network. Besides operating as a normal ATM end station client, Linux
+ LANE client can also act as an proxy client bridging packets between
+ ELAN and Ethernet segments. You need LANE if you want to try MPOA.
+
+config ATM_MPOA
+ tristate "Multi-Protocol Over ATM (MPOA) support (EXPERIMENTAL)"
+ depends on ATM && INET && ATM_LANE!=n
+ help
+ Multi-Protocol Over ATM allows ATM edge devices such as routers,
+ bridges and ATM attached hosts establish direct ATM VCs across
+ subnetwork boundaries. These shortcut connections bypass routers
+ enhancing overall network performance.
+
+config ATM_BR2684
+ tristate "RFC1483/2684 Bridged protocols"
+ depends on ATM && INET
+ help
+ ATM PVCs can carry ethernet PDUs according to rfc2684 (formerly 1483)
+ This device will act like an ethernet from the kernels point of view,
+ with the traffic being carried by ATM PVCs (currently 1 PVC/device).
+ This is sometimes used over DSL lines. If in doubt, say N.
+
+config ATM_BR2684_IPFILTER
+ bool "Per-VC IP filter kludge"
+ depends on ATM_BR2684
+ help
+ This is an experimental mechanism for users who need to terminating a
+ large number of IP-only vcc's. Do not enable this unless you are sure
+ you know what you are doing.
+
+config BRIDGE
+ tristate "802.1d Ethernet Bridging"
+ ---help---
+ If you say Y here, then your Linux box will be able to act as an
+ Ethernet bridge, which means that the different Ethernet segments it
+ is connected to will appear as one Ethernet to the participants.
+ Several such bridges can work together to create even larger
+ networks of Ethernets using the IEEE 802.1 spanning tree algorithm.
+ As this is a standard, Linux bridges will cooperate properly with
+ other third party bridge products.
+
+ In order to use the Ethernet bridge, you'll need the bridge
+ configuration tools; see <file:Documentation/networking/bridge.txt>
+ for location. Please read the Bridge mini-HOWTO for more
+ information.
+
+ If you enable iptables support along with the bridge support then you
+ turn your bridge into a bridging IP firewall.
+ iptables will then see the IP packets being bridged, so you need to
+ take this into account when setting up your firewall rules.
+ Enabling arptables support when bridging will let arptables see
+ bridged ARP traffic in the arptables FORWARD chain.
+
+ To compile this code as a module, choose M here: the module
+ will be called bridge.
+
+ If unsure, say N.
+
+config VLAN_8021Q
+ tristate "802.1Q VLAN Support"
+ ---help---
+ Select this and you will be able to create 802.1Q VLAN interfaces
+ on your ethernet interfaces. 802.1Q VLAN supports almost
+ everything a regular ethernet interface does, including
+ firewalling, bridging, and of course IP traffic. You will need
+ the 'vconfig' tool from the VLAN project in order to effectively
+ use VLANs. See the VLAN web page for more information:
+ <http://www.candelatech.com/~greear/vlan.html>
+
+ To compile this code as a module, choose M here: the module
+ will be called 8021q.
+
+ If unsure, say N.
+
+config DECNET
+ tristate "DECnet Support"
+ ---help---
+ The DECnet networking protocol was used in many products made by
+ Digital (now Compaq). It provides reliable stream and sequenced
+ packet communications over which run a variety of services similar
+ to those which run over TCP/IP.
+
+ To find some tools to use with the kernel layer support, please
+ look at Patrick Caulfield's web site:
+ <http://linux-decnet.sourceforge.net/>.
+
+ More detailed documentation is available in
+ <file:Documentation/networking/decnet.txt>.
+
+ Be sure to say Y to "/proc file system support" and "Sysctl support"
+ below when using DECnet, since you will need sysctl support to aid
+ in configuration at run time.
+
+ The DECnet code is also available as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module is called decnet.
+
+source "net/decnet/Kconfig"
+
+source "net/llc/Kconfig"
+
+config IPX
+ tristate "The IPX protocol"
+ select LLC
+ ---help---
+ This is support for the Novell networking protocol, IPX, commonly
+ used for local networks of Windows machines. You need it if you
+ want to access Novell NetWare file or print servers using the Linux
+ Novell client ncpfs (available from
+ <ftp://platan.vc.cvut.cz/pub/linux/ncpfs/>) or from
+ within the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>). In order
+ to do the former, you'll also have to say Y to "NCP file system
+ support", below.
+
+ IPX is similar in scope to IP, while SPX, which runs on top of IPX,
+ is similar to TCP. There is also experimental support for SPX in
+ Linux (see "SPX networking", below).
+
+ To turn your Linux box into a fully featured NetWare file server and
+ IPX router, say Y here and fetch either lwared from
+ <ftp://ibiblio.org/pub/Linux/system/network/daemons/> or
+ mars_nwe from <ftp://www.compu-art.de/mars_nwe/>. For more
+ information, read the IPX-HOWTO available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ General information about how to connect Linux, Windows machines and
+ Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
+
+ The IPX driver would enlarge your kernel by about 16 KB. To compile
+ this driver as a module, choose M here: the module will be called ipx.
+ Unless you want to integrate your Linux box with a local Novell
+ network, say N.
+
+source "net/ipx/Kconfig"
+
+config ATALK
+ tristate "Appletalk protocol support"
+ select LLC
+ ---help---
+ AppleTalk is the protocol that Apple computers can use to communicate
+ on a network. If your Linux box is connected to such a network and you
+ wish to connect to it, say Y. You will need to use the netatalk package
+ so that your Linux box can act as a print and file server for Macs as
+ well as access AppleTalk printers. Check out
+ <http://www.zettabyte.net/netatalk/> on the WWW for details.
+ EtherTalk is the name used for AppleTalk over Ethernet and the
+ cheaper and slower LocalTalk is AppleTalk over a proprietary Apple
+ network using serial links. EtherTalk and LocalTalk are fully
+ supported by Linux.
+
+ General information about how to connect Linux, Windows machines and
+ Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>. The
+ NET-3-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>, contains valuable
+ information as well.
+
+ To compile this driver as a module, choose M here: the module will be
+ called appletalk. You almost certainly want to compile it as a
+ module so you can restart your AppleTalk stack without rebooting
+ your machine. I hear that the GNU boycott of Apple is over, so
+ even politically correct people are allowed to say Y here.
+
+source "drivers/net/appletalk/Kconfig"
+
+config X25
+ tristate "CCITT X.25 Packet Layer (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ ---help---
+ X.25 is a set of standardized network protocols, similar in scope to
+ frame relay; the one physical line from your box to the X.25 network
+ entry point can carry several logical point-to-point connections
+ (called "virtual circuits") to other computers connected to the X.25
+ network. Governments, banks, and other organizations tend to use it
+ to connect to each other or to form Wide Area Networks (WANs). Many
+ countries have public X.25 networks. X.25 consists of two
+ protocols: the higher level Packet Layer Protocol (PLP) (say Y here
+ if you want that) and the lower level data link layer protocol LAPB
+ (say Y to "LAPB Data Link Driver" below if you want that).
+
+ You can read more about X.25 at <http://www.sangoma.com/x25.htm> and
+ <http://www.cisco.com/univercd/cc/td/doc/product/software/ios11/cbook/cx25.htm>.
+ Information about X.25 for Linux is contained in the files
+ <file:Documentation/networking/x25.txt> and
+ <file:Documentation/networking/x25-iface.txt>.
+
+ One connects to an X.25 network either with a dedicated network card
+ using the X.21 protocol (not yet supported by Linux) or one can do
+ X.25 over a standard telephone line using an ordinary modem (say Y
+ to "X.25 async driver" below) or over Ethernet using an ordinary
+ Ethernet card and the LAPB over Ethernet (say Y to "LAPB Data Link
+ Driver" and "LAPB over Ethernet driver" below).
+
+ To compile this driver as a module, choose M here: the module
+ will be called x25. If unsure, say N.
+
+config LAPB
+ tristate "LAPB Data Link Driver (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ ---help---
+ Link Access Procedure, Balanced (LAPB) is the data link layer (i.e.
+ the lower) part of the X.25 protocol. It offers a reliable
+ connection service to exchange data frames with one other host, and
+ it is used to transport higher level protocols (mostly X.25 Packet
+ Layer, the higher part of X.25, but others are possible as well).
+ Usually, LAPB is used with specialized X.21 network cards, but Linux
+ currently supports LAPB only over Ethernet connections. If you want
+ to use LAPB connections over Ethernet, say Y here and to "LAPB over
+ Ethernet driver" below. Read
+ <file:Documentation/networking/lapb-module.txt> for technical
+ details.
+
+ To compile this driver as a module, choose M here: the
+ module will be called lapb. If unsure, say N.
+
+config NET_DIVERT
+ bool "Frame Diverter (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ ---help---
+ The Frame Diverter allows you to divert packets from the
+ network, that are not aimed at the interface receiving it (in
+ promisc. mode). Typically, a Linux box setup as an Ethernet bridge
+ with the Frames Diverter on, can do some *really* transparent www
+ caching using a Squid proxy for example.
+
+ This is very useful when you don't want to change your router's
+ config (or if you simply don't have access to it).
+
+ The other possible usages of diverting Ethernet Frames are
+ numberous:
+ - reroute smtp traffic to another interface
+ - traffic-shape certain network streams
+ - transparently proxy smtp connections
+ - etc...
+
+ For more informations, please refer to:
+ <http://diverter.sourceforge.net/>
+ <http://perso.wanadoo.fr/magpie/EtherDivert.html>
+
+ If unsure, say N.
+
+config ECONET
+ tristate "Acorn Econet/AUN protocols (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && INET
+ ---help---
+ Econet is a fairly old and slow networking protocol mainly used by
+ Acorn computers to access file and print servers. It uses native
+ Econet network cards. AUN is an implementation of the higher level
+ parts of Econet that runs over ordinary Ethernet connections, on
+ top of the UDP packet protocol, which in turn runs on top of the
+ Internet protocol IP.
+
+ If you say Y here, you can choose with the next two options whether
+ to send Econet/AUN traffic over a UDP Ethernet connection or over
+ a native Econet network card.
+
+ To compile this driver as a module, choose M here: the module
+ will be called econet.
+
+config ECONET_AUNUDP
+ bool "AUN over UDP"
+ depends on ECONET
+ help
+ Say Y here if you want to send Econet/AUN traffic over a UDP
+ connection (UDP is a packet based protocol that runs on top of the
+ Internet protocol IP) using an ordinary Ethernet network card.
+
+config ECONET_NATIVE
+ bool "Native Econet"
+ depends on ECONET
+ help
+ Say Y here if you have a native Econet network card installed in
+ your computer.
+
+config WAN_ROUTER
+ tristate "WAN router"
+ depends on EXPERIMENTAL
+ ---help---
+ Wide Area Networks (WANs), such as X.25, frame relay and leased
+ lines, are used to interconnect Local Area Networks (LANs) over vast
+ distances with data transfer rates significantly higher than those
+ achievable with commonly used asynchronous modem connections.
+ Usually, a quite expensive external device called a `WAN router' is
+ needed to connect to a WAN.
+
+ As an alternative, WAN routing can be built into the Linux kernel.
+ With relatively inexpensive WAN interface cards available on the
+ market, a perfectly usable router can be built for less than half
+ the price of an external router. If you have one of those cards and
+ wish to use your Linux box as a WAN router, say Y here and also to
+ the WAN driver for your card, below. You will then need the
+ wan-tools package which is available from <ftp://ftp.sangoma.com/>.
+ Read <file:Documentation/networking/wan-router.txt> for more
+ information.
+
+ To compile WAN routing support as a module, choose M here: the
+ module will be called wanrouter.
+
+ If unsure, say N.
+
+menu "QoS and/or fair queueing"
+
+config NET_SCHED
+ bool "QoS and/or fair queueing"
+ ---help---
+ When the kernel has several packets to send out over a network
+ device, it has to decide which ones to send first, which ones to
+ delay, and which ones to drop. This is the job of the packet
+ scheduler, and several different algorithms for how to do this
+ "fairly" have been proposed.
+
+ If you say N here, you will get the standard packet scheduler, which
+ is a FIFO (first come, first served). If you say Y here, you will be
+ able to choose from among several alternative algorithms which can
+ then be attached to different network devices. This is useful for
+ example if some of your network devices are real time devices that
+ need a certain minimum data flow rate, or if you need to limit the
+ maximum data flow rate for traffic which matches specified criteria.
+ This code is considered to be experimental.
+
+ To administer these schedulers, you'll need the user-level utilities
+ from the package iproute2+tc at <ftp://ftp.tux.org/pub/net/ip-routing/>.
+ That package also contains some documentation; for more, check out
+ <http://snafu.freedom.org/linux2.2/iproute-notes.html>.
+
+ This Quality of Service (QoS) support will enable you to use
+ Differentiated Services (diffserv) and Resource Reservation Protocol
+ (RSVP) on your Linux router if you also say Y to "QoS support",
+ "Packet classifier API" and to some classifiers below. Documentation
+ and software is at <http://diffserv.sourceforge.net/>.
+
+ If you say Y here and to "/proc file system" below, you will be able
+ to read status information about packet schedulers from the file
+ /proc/net/psched.
+
+ The available schedulers are listed in the following questions; you
+ can say Y to as many as you like. If unsure, say N now.
+
+source "net/sched/Kconfig"
+
+endmenu
+
+menu "Network testing"
+
+config NET_PKTGEN
+ tristate "Packet Generator (USE WITH CAUTION)"
+ depends on PROC_FS
+ ---help---
+ This module will inject preconfigured packets, at a configurable
+ rate, out of a given interface. It is used for network interface
+ stress testing and performance analysis. If you don't understand
+ what was just said, you don't need it: say N.
+
+ Documentation on how to use the packet generator can be found
+ at <file:Documentation/networking/pktgen.txt>.
+
+ To compile this code as a module, choose M here: the
+ module will be called pktgen.
+
+endmenu
+
+endmenu
+
+config NETPOLL
+ def_bool NETCONSOLE
+
+config NETPOLL_RX
+ bool "Netpoll support for trapping incoming packets"
+ default n
+ depends on NETPOLL
+
+config NETPOLL_TRAP
+ bool "Netpoll traffic trapping"
+ default n
+ depends on NETPOLL
+
+config NET_POLL_CONTROLLER
+ def_bool NETPOLL
+
+source "net/ax25/Kconfig"
+
+source "net/irda/Kconfig"
+
+source "net/bluetooth/Kconfig"
+
+source "drivers/net/Kconfig"
+
+endmenu
+