hwmon: (pmbus) Add support for MAX20751
MAX20751 is a multiphase power controller with internal buck converter.
It uses VR12.0 to report the output voltage. This requires an explicit
driver, since the VR version can not be auto-detected.
The chip supports a manufacturer specific command to fine-tune the output
voltage. This command is not currently supported.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
diff --git a/Documentation/hwmon/max20751 b/Documentation/hwmon/max20751
new file mode 100644
index 0000000..f9fa25e
--- /dev/null
+++ b/Documentation/hwmon/max20751
@@ -0,0 +1,77 @@
+Kernel driver max20751
+======================
+
+Supported chips:
+ * maxim MAX20751
+ Prefix: 'max20751'
+ Addresses scanned: -
+ Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX20751.pdf
+ Application note: http://pdfserv.maximintegrated.com/en/an/AN5941.pdf
+
+Author: Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+This driver supports MAX20751 Multiphase Master with PMBus Interface
+and Internal Buck Converter.
+
+The driver is a client driver to the core PMBus driver.
+Please see Documentation/hwmon/pmbus for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices for
+details.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported.
+
+in1_label "vin1"
+in1_input Measured voltage.
+in1_min Minimum input voltage.
+in1_max Maximum input voltage.
+in1_lcrit Critical minimum input voltage.
+in1_crit Critical maximum input voltage.
+in1_min_alarm Input voltage low alarm.
+in1_lcrit_alarm Input voltage critical low alarm.
+in1_min_alarm Input voltage low alarm.
+in1_max_alarm Input voltage high alarm.
+
+in2_label "vout1"
+in2_input Measured voltage.
+in2_min Minimum output voltage.
+in2_max Maximum output voltage.
+in2_lcrit Critical minimum output voltage.
+in2_crit Critical maximum output voltage.
+in2_min_alarm Output voltage low alarm.
+in2_lcrit_alarm Output voltage critical low alarm.
+in2_min_alarm Output voltage low alarm.
+in2_max_alarm Output voltage high alarm.
+
+curr1_input Measured output current.
+curr1_label "iout1"
+curr1_max Maximum output current.
+curr1_alarm Current high alarm.
+
+temp1_input Measured temperature.
+temp1_max Maximum temperature.
+temp1_crit Critical high temperature.
+temp1_max_alarm Chip temperature high alarm.
+temp1_crit_alarm Chip temperature critical high alarm.
+
+power1_input Output power.
+power1_label "pout1"