[PATCH] Char: istallion, eliminate typedefs
Use only struct <name> instead of defining a new type <name_t>.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
index 2f56bc7..75b1e0c 100644
--- a/drivers/char/istallion.c
+++ b/drivers/char/istallion.c
@@ -101,14 +101,14 @@
* interrupt is required.
*/
-typedef struct {
+struct stlconf {
int brdtype;
int ioaddr1;
int ioaddr2;
unsigned long memaddr;
int irq;
int irqtype;
-} stlconf_t;
+};
static int stli_nrbrds;
@@ -185,13 +185,13 @@
*/
static comstats_t stli_comstats;
static combrd_t stli_brdstats;
-static asystats_t stli_cdkstats;
-static stlibrd_t stli_dummybrd;
-static stliport_t stli_dummyport;
+static struct asystats stli_cdkstats;
+static struct stlibrd stli_dummybrd;
+static struct stliport stli_dummyport;
/*****************************************************************************/
-static stlibrd_t *stli_brds[STL_MAXBRDS];
+static struct stlibrd *stli_brds[STL_MAXBRDS];
static int stli_shared;
@@ -284,12 +284,10 @@
* parse any module arguments.
*/
-typedef struct stlibrdtype {
+static struct stlibrdtype {
char *name;
int type;
-} stlibrdtype_t;
-
-static stlibrdtype_t stli_brdstr[] = {
+} stli_brdstr[] = {
{ "stallion", BRD_STALLION },
{ "1", BRD_STALLION },
{ "brumby", BRD_BRUMBY },
@@ -594,7 +592,7 @@
* Prototype all functions in this driver!
*/
-static int stli_parsebrd(stlconf_t *confp, char **argp);
+static int stli_parsebrd(struct stlconf *confp, char **argp);
static int stli_init(void);
static int stli_open(struct tty_struct *tty, struct file *filp);
static void stli_close(struct tty_struct *tty, struct file *filp);
@@ -614,82 +612,82 @@
static void stli_waituntilsent(struct tty_struct *tty, int timeout);
static void stli_sendxchar(struct tty_struct *tty, char ch);
static void stli_hangup(struct tty_struct *tty);
-static int stli_portinfo(stlibrd_t *brdp, stliport_t *portp, int portnr, char *pos);
+static int stli_portinfo(struct stlibrd *brdp, struct stliport *portp, int portnr, char *pos);
-static int stli_brdinit(stlibrd_t *brdp);
-static int stli_startbrd(stlibrd_t *brdp);
+static int stli_brdinit(struct stlibrd *brdp);
+static int stli_startbrd(struct stlibrd *brdp);
static ssize_t stli_memread(struct file *fp, char __user *buf, size_t count, loff_t *offp);
static ssize_t stli_memwrite(struct file *fp, const char __user *buf, size_t count, loff_t *offp);
static int stli_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, unsigned long arg);
-static void stli_brdpoll(stlibrd_t *brdp, cdkhdr_t __iomem *hdrp);
+static void stli_brdpoll(struct stlibrd *brdp, cdkhdr_t __iomem *hdrp);
static void stli_poll(unsigned long arg);
-static int stli_hostcmd(stlibrd_t *brdp, stliport_t *portp);
-static int stli_initopen(stlibrd_t *brdp, stliport_t *portp);
-static int stli_rawopen(stlibrd_t *brdp, stliport_t *portp, unsigned long arg, int wait);
-static int stli_rawclose(stlibrd_t *brdp, stliport_t *portp, unsigned long arg, int wait);
-static int stli_waitcarrier(stlibrd_t *brdp, stliport_t *portp, struct file *filp);
+static int stli_hostcmd(struct stlibrd *brdp, struct stliport *portp);
+static int stli_initopen(struct stlibrd *brdp, struct stliport *portp);
+static int stli_rawopen(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait);
+static int stli_rawclose(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait);
+static int stli_waitcarrier(struct stlibrd *brdp, struct stliport *portp, struct file *filp);
static void stli_dohangup(struct work_struct *);
-static int stli_setport(stliport_t *portp);
-static int stli_cmdwait(stlibrd_t *brdp, stliport_t *portp, unsigned long cmd, void *arg, int size, int copyback);
-static void stli_sendcmd(stlibrd_t *brdp, stliport_t *portp, unsigned long cmd, void *arg, int size, int copyback);
-static void __stli_sendcmd(stlibrd_t *brdp, stliport_t *portp, unsigned long cmd, void *arg, int size, int copyback);
-static void stli_dodelaycmd(stliport_t *portp, cdkctrl_t __iomem *cp);
-static void stli_mkasyport(stliport_t *portp, asyport_t *pp, struct ktermios *tiosp);
+static int stli_setport(struct stliport *portp);
+static int stli_cmdwait(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback);
+static void stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback);
+static void __stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback);
+static void stli_dodelaycmd(struct stliport *portp, cdkctrl_t __iomem *cp);
+static void stli_mkasyport(struct stliport *portp, asyport_t *pp, struct ktermios *tiosp);
static void stli_mkasysigs(asysigs_t *sp, int dtr, int rts);
static long stli_mktiocm(unsigned long sigvalue);
-static void stli_read(stlibrd_t *brdp, stliport_t *portp);
-static int stli_getserial(stliport_t *portp, struct serial_struct __user *sp);
-static int stli_setserial(stliport_t *portp, struct serial_struct __user *sp);
+static void stli_read(struct stlibrd *brdp, struct stliport *portp);
+static int stli_getserial(struct stliport *portp, struct serial_struct __user *sp);
+static int stli_setserial(struct stliport *portp, struct serial_struct __user *sp);
static int stli_getbrdstats(combrd_t __user *bp);
-static int stli_getportstats(stliport_t *portp, comstats_t __user *cp);
-static int stli_portcmdstats(stliport_t *portp);
-static int stli_clrportstats(stliport_t *portp, comstats_t __user *cp);
-static int stli_getportstruct(stliport_t __user *arg);
-static int stli_getbrdstruct(stlibrd_t __user *arg);
-static stlibrd_t *stli_allocbrd(void);
+static int stli_getportstats(struct stliport *portp, comstats_t __user *cp);
+static int stli_portcmdstats(struct stliport *portp);
+static int stli_clrportstats(struct stliport *portp, comstats_t __user *cp);
+static int stli_getportstruct(struct stliport __user *arg);
+static int stli_getbrdstruct(struct stlibrd __user *arg);
+static struct stlibrd *stli_allocbrd(void);
-static void stli_ecpinit(stlibrd_t *brdp);
-static void stli_ecpenable(stlibrd_t *brdp);
-static void stli_ecpdisable(stlibrd_t *brdp);
-static void __iomem *stli_ecpgetmemptr(stlibrd_t *brdp, unsigned long offset, int line);
-static void stli_ecpreset(stlibrd_t *brdp);
-static void stli_ecpintr(stlibrd_t *brdp);
-static void stli_ecpeiinit(stlibrd_t *brdp);
-static void stli_ecpeienable(stlibrd_t *brdp);
-static void stli_ecpeidisable(stlibrd_t *brdp);
-static void __iomem *stli_ecpeigetmemptr(stlibrd_t *brdp, unsigned long offset, int line);
-static void stli_ecpeireset(stlibrd_t *brdp);
-static void stli_ecpmcenable(stlibrd_t *brdp);
-static void stli_ecpmcdisable(stlibrd_t *brdp);
-static void __iomem *stli_ecpmcgetmemptr(stlibrd_t *brdp, unsigned long offset, int line);
-static void stli_ecpmcreset(stlibrd_t *brdp);
-static void stli_ecppciinit(stlibrd_t *brdp);
-static void __iomem *stli_ecppcigetmemptr(stlibrd_t *brdp, unsigned long offset, int line);
-static void stli_ecppcireset(stlibrd_t *brdp);
+static void stli_ecpinit(struct stlibrd *brdp);
+static void stli_ecpenable(struct stlibrd *brdp);
+static void stli_ecpdisable(struct stlibrd *brdp);
+static void __iomem *stli_ecpgetmemptr(struct stlibrd *brdp, unsigned long offset, int line);
+static void stli_ecpreset(struct stlibrd *brdp);
+static void stli_ecpintr(struct stlibrd *brdp);
+static void stli_ecpeiinit(struct stlibrd *brdp);
+static void stli_ecpeienable(struct stlibrd *brdp);
+static void stli_ecpeidisable(struct stlibrd *brdp);
+static void __iomem *stli_ecpeigetmemptr(struct stlibrd *brdp, unsigned long offset, int line);
+static void stli_ecpeireset(struct stlibrd *brdp);
+static void stli_ecpmcenable(struct stlibrd *brdp);
+static void stli_ecpmcdisable(struct stlibrd *brdp);
+static void __iomem *stli_ecpmcgetmemptr(struct stlibrd *brdp, unsigned long offset, int line);
+static void stli_ecpmcreset(struct stlibrd *brdp);
+static void stli_ecppciinit(struct stlibrd *brdp);
+static void __iomem *stli_ecppcigetmemptr(struct stlibrd *brdp, unsigned long offset, int line);
+static void stli_ecppcireset(struct stlibrd *brdp);
-static void stli_onbinit(stlibrd_t *brdp);
-static void stli_onbenable(stlibrd_t *brdp);
-static void stli_onbdisable(stlibrd_t *brdp);
-static void __iomem *stli_onbgetmemptr(stlibrd_t *brdp, unsigned long offset, int line);
-static void stli_onbreset(stlibrd_t *brdp);
-static void stli_onbeinit(stlibrd_t *brdp);
-static void stli_onbeenable(stlibrd_t *brdp);
-static void stli_onbedisable(stlibrd_t *brdp);
-static void __iomem *stli_onbegetmemptr(stlibrd_t *brdp, unsigned long offset, int line);
-static void stli_onbereset(stlibrd_t *brdp);
-static void stli_bbyinit(stlibrd_t *brdp);
-static void __iomem *stli_bbygetmemptr(stlibrd_t *brdp, unsigned long offset, int line);
-static void stli_bbyreset(stlibrd_t *brdp);
-static void stli_stalinit(stlibrd_t *brdp);
-static void __iomem *stli_stalgetmemptr(stlibrd_t *brdp, unsigned long offset, int line);
-static void stli_stalreset(stlibrd_t *brdp);
+static void stli_onbinit(struct stlibrd *brdp);
+static void stli_onbenable(struct stlibrd *brdp);
+static void stli_onbdisable(struct stlibrd *brdp);
+static void __iomem *stli_onbgetmemptr(struct stlibrd *brdp, unsigned long offset, int line);
+static void stli_onbreset(struct stlibrd *brdp);
+static void stli_onbeinit(struct stlibrd *brdp);
+static void stli_onbeenable(struct stlibrd *brdp);
+static void stli_onbedisable(struct stlibrd *brdp);
+static void __iomem *stli_onbegetmemptr(struct stlibrd *brdp, unsigned long offset, int line);
+static void stli_onbereset(struct stlibrd *brdp);
+static void stli_bbyinit(struct stlibrd *brdp);
+static void __iomem *stli_bbygetmemptr(struct stlibrd *brdp, unsigned long offset, int line);
+static void stli_bbyreset(struct stlibrd *brdp);
+static void stli_stalinit(struct stlibrd *brdp);
+static void __iomem *stli_stalgetmemptr(struct stlibrd *brdp, unsigned long offset, int line);
+static void stli_stalreset(struct stlibrd *brdp);
-static stliport_t *stli_getport(int brdnr, int panelnr, int portnr);
+static struct stliport *stli_getport(int brdnr, int panelnr, int portnr);
-static int stli_initecp(stlibrd_t *brdp);
-static int stli_initonb(stlibrd_t *brdp);
-static int stli_eisamemprobe(stlibrd_t *brdp);
-static int stli_initports(stlibrd_t *brdp);
+static int stli_initecp(struct stlibrd *brdp);
+static int stli_initonb(struct stlibrd *brdp);
+static int stli_eisamemprobe(struct stlibrd *brdp);
+static int stli_initports(struct stlibrd *brdp);
/*****************************************************************************/
@@ -727,9 +725,9 @@
static struct class *istallion_class;
-static void stli_cleanup_ports(stlibrd_t *brdp)
+static void stli_cleanup_ports(struct stlibrd *brdp)
{
- stliport_t *portp;
+ struct stliport *portp;
unsigned int j;
for (j = 0; j < STL_MAXPORTS; j++) {
@@ -756,7 +754,7 @@
static void __exit istallion_module_exit(void)
{
- stlibrd_t *brdp;
+ struct stlibrd *brdp;
int i;
printk(KERN_INFO "Unloading %s: version %s\n", stli_drvtitle,
@@ -811,7 +809,7 @@
* Parse the supplied argument string, into the board conf struct.
*/
-static int stli_parsebrd(stlconf_t *confp, char **argp)
+static int stli_parsebrd(struct stlconf *confp, char **argp)
{
char *sp;
int i;
@@ -843,8 +841,8 @@
static int stli_open(struct tty_struct *tty, struct file *filp)
{
- stlibrd_t *brdp;
- stliport_t *portp;
+ struct stlibrd *brdp;
+ struct stliport *portp;
unsigned int minordev;
int brdnr, portnr, rc;
@@ -938,8 +936,8 @@
static void stli_close(struct tty_struct *tty, struct file *filp)
{
- stlibrd_t *brdp;
- stliport_t *portp;
+ struct stlibrd *brdp;
+ struct stliport *portp;
unsigned long flags;
portp = tty->driver_data;
@@ -1016,7 +1014,7 @@
* this still all happens pretty quickly.
*/
-static int stli_initopen(stlibrd_t *brdp, stliport_t *portp)
+static int stli_initopen(struct stlibrd *brdp, struct stliport *portp)
{
struct tty_struct *tty;
asynotify_t nt;
@@ -1064,7 +1062,7 @@
* to overlap.
*/
-static int stli_rawopen(stlibrd_t *brdp, stliport_t *portp, unsigned long arg, int wait)
+static int stli_rawopen(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait)
{
cdkhdr_t __iomem *hdrp;
cdkctrl_t __iomem *cp;
@@ -1135,7 +1133,7 @@
* wait is true then must have user context (to sleep).
*/
-static int stli_rawclose(stlibrd_t *brdp, stliport_t *portp, unsigned long arg, int wait)
+static int stli_rawclose(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait)
{
cdkhdr_t __iomem *hdrp;
cdkctrl_t __iomem *cp;
@@ -1199,7 +1197,7 @@
* to complete (as opposed to initiating the command then returning).
*/
-static int stli_cmdwait(stlibrd_t *brdp, stliport_t *portp, unsigned long cmd, void *arg, int size, int copyback)
+static int stli_cmdwait(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback)
{
wait_event_interruptible(portp->raw_wait,
!test_bit(ST_CMDING, &portp->state));
@@ -1225,9 +1223,9 @@
* waiting for the command to complete - so must have user context.
*/
-static int stli_setport(stliport_t *portp)
+static int stli_setport(struct stliport *portp)
{
- stlibrd_t *brdp;
+ struct stlibrd *brdp;
asyport_t aport;
if (portp == NULL)
@@ -1251,7 +1249,7 @@
* maybe because if we are clocal then we don't need to wait...
*/
-static int stli_waitcarrier(stlibrd_t *brdp, stliport_t *portp, struct file *filp)
+static int stli_waitcarrier(struct stlibrd *brdp, struct stliport *portp, struct file *filp)
{
unsigned long flags;
int rc, doclocal;
@@ -1316,8 +1314,8 @@
unsigned char __iomem *bits;
unsigned char __iomem *shbuf;
unsigned char *chbuf;
- stliport_t *portp;
- stlibrd_t *brdp;
+ struct stliport *portp;
+ struct stlibrd *brdp;
unsigned int len, stlen, head, tail, size;
unsigned long flags;
@@ -1423,8 +1421,8 @@
unsigned char __iomem *bits;
cdkasy_t __iomem *ap;
struct tty_struct *cooktty;
- stliport_t *portp;
- stlibrd_t *brdp;
+ struct stliport *portp;
+ struct stlibrd *brdp;
unsigned int len, stlen, head, tail, size, count, cooksize;
unsigned char *buf;
unsigned char __iomem *shbuf;
@@ -1511,8 +1509,8 @@
static int stli_writeroom(struct tty_struct *tty)
{
cdkasyrq_t __iomem *rp;
- stliport_t *portp;
- stlibrd_t *brdp;
+ struct stliport *portp;
+ struct stlibrd *brdp;
unsigned int head, tail, len;
unsigned long flags;
@@ -1564,8 +1562,8 @@
static int stli_charsinbuffer(struct tty_struct *tty)
{
cdkasyrq_t __iomem *rp;
- stliport_t *portp;
- stlibrd_t *brdp;
+ struct stliport *portp;
+ struct stlibrd *brdp;
unsigned int head, tail, len;
unsigned long flags;
@@ -1602,10 +1600,10 @@
* Generate the serial struct info.
*/
-static int stli_getserial(stliport_t *portp, struct serial_struct __user *sp)
+static int stli_getserial(struct stliport *portp, struct serial_struct __user *sp)
{
struct serial_struct sio;
- stlibrd_t *brdp;
+ struct stlibrd *brdp;
memset(&sio, 0, sizeof(struct serial_struct));
sio.type = PORT_UNKNOWN;
@@ -1635,7 +1633,7 @@
* just quietly ignore any requests to change irq, etc.
*/
-static int stli_setserial(stliport_t *portp, struct serial_struct __user *sp)
+static int stli_setserial(struct stliport *portp, struct serial_struct __user *sp)
{
struct serial_struct sio;
int rc;
@@ -1666,8 +1664,8 @@
static int stli_tiocmget(struct tty_struct *tty, struct file *file)
{
- stliport_t *portp = tty->driver_data;
- stlibrd_t *brdp;
+ struct stliport *portp = tty->driver_data;
+ struct stlibrd *brdp;
int rc;
if (portp == NULL)
@@ -1690,8 +1688,8 @@
static int stli_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear)
{
- stliport_t *portp = tty->driver_data;
- stlibrd_t *brdp;
+ struct stliport *portp = tty->driver_data;
+ struct stlibrd *brdp;
int rts = -1, dtr = -1;
if (portp == NULL)
@@ -1721,8 +1719,8 @@
static int stli_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg)
{
- stliport_t *portp;
- stlibrd_t *brdp;
+ struct stliport *portp;
+ struct stlibrd *brdp;
unsigned int ival;
int rc;
void __user *argp = (void __user *)arg;
@@ -1798,8 +1796,8 @@
static void stli_settermios(struct tty_struct *tty, struct ktermios *old)
{
- stliport_t *portp;
- stlibrd_t *brdp;
+ struct stliport *portp;
+ struct stlibrd *brdp;
struct ktermios *tiosp;
asyport_t aport;
@@ -1844,7 +1842,7 @@
static void stli_throttle(struct tty_struct *tty)
{
- stliport_t *portp = tty->driver_data;
+ struct stliport *portp = tty->driver_data;
if (portp == NULL)
return;
set_bit(ST_RXSTOP, &portp->state);
@@ -1860,7 +1858,7 @@
static void stli_unthrottle(struct tty_struct *tty)
{
- stliport_t *portp = tty->driver_data;
+ struct stliport *portp = tty->driver_data;
if (portp == NULL)
return;
clear_bit(ST_RXSTOP, &portp->state);
@@ -1899,7 +1897,7 @@
static void stli_dohangup(struct work_struct *ugly_api)
{
- stliport_t *portp = container_of(ugly_api, stliport_t, tqhangup);
+ struct stliport *portp = container_of(ugly_api, struct stliport, tqhangup);
if (portp->tty != NULL) {
tty_hangup(portp->tty);
}
@@ -1916,8 +1914,8 @@
static void stli_hangup(struct tty_struct *tty)
{
- stliport_t *portp;
- stlibrd_t *brdp;
+ struct stliport *portp;
+ struct stlibrd *brdp;
unsigned long flags;
portp = tty->driver_data;
@@ -1969,8 +1967,8 @@
static void stli_flushbuffer(struct tty_struct *tty)
{
- stliport_t *portp;
- stlibrd_t *brdp;
+ struct stliport *portp;
+ struct stlibrd *brdp;
unsigned long ftype, flags;
portp = tty->driver_data;
@@ -2006,8 +2004,8 @@
static void stli_breakctl(struct tty_struct *tty, int state)
{
- stlibrd_t *brdp;
- stliport_t *portp;
+ struct stlibrd *brdp;
+ struct stliport *portp;
long arg;
portp = tty->driver_data;
@@ -2027,7 +2025,7 @@
static void stli_waituntilsent(struct tty_struct *tty, int timeout)
{
- stliport_t *portp;
+ struct stliport *portp;
unsigned long tend;
if (tty == NULL)
@@ -2053,8 +2051,8 @@
static void stli_sendxchar(struct tty_struct *tty, char ch)
{
- stlibrd_t *brdp;
- stliport_t *portp;
+ struct stlibrd *brdp;
+ struct stliport *portp;
asyctrl_t actrl;
portp = tty->driver_data;
@@ -2088,7 +2086,7 @@
* short then padded with spaces).
*/
-static int stli_portinfo(stlibrd_t *brdp, stliport_t *portp, int portnr, char *pos)
+static int stli_portinfo(struct stlibrd *brdp, struct stliport *portp, int portnr, char *pos)
{
char *sp, *uart;
int rc, cnt;
@@ -2151,8 +2149,8 @@
static int stli_readproc(char *page, char **start, off_t off, int count, int *eof, void *data)
{
- stlibrd_t *brdp;
- stliport_t *portp;
+ struct stlibrd *brdp;
+ struct stliport *portp;
int brdnr, portnr, totalport;
int curoff, maxoff;
char *pos;
@@ -2223,7 +2221,7 @@
* entry point)
*/
-static void __stli_sendcmd(stlibrd_t *brdp, stliport_t *portp, unsigned long cmd, void *arg, int size, int copyback)
+static void __stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback)
{
cdkhdr_t __iomem *hdrp;
cdkctrl_t __iomem *cp;
@@ -2259,7 +2257,7 @@
spin_unlock_irqrestore(&brd_lock, flags);
}
-static void stli_sendcmd(stlibrd_t *brdp, stliport_t *portp, unsigned long cmd, void *arg, int size, int copyback)
+static void stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback)
{
unsigned long flags;
@@ -2278,7 +2276,7 @@
* more chars to unload.
*/
-static void stli_read(stlibrd_t *brdp, stliport_t *portp)
+static void stli_read(struct stlibrd *brdp, struct stliport *portp)
{
cdkasyrq_t __iomem *rp;
char __iomem *shbuf;
@@ -2340,7 +2338,7 @@
* difficult to deal with them here.
*/
-static void stli_dodelaycmd(stliport_t *portp, cdkctrl_t __iomem *cp)
+static void stli_dodelaycmd(struct stliport *portp, cdkctrl_t __iomem *cp)
{
int cmd;
@@ -2388,7 +2386,7 @@
* then port is still busy, otherwise no longer busy.
*/
-static int stli_hostcmd(stlibrd_t *brdp, stliport_t *portp)
+static int stli_hostcmd(struct stlibrd *brdp, struct stliport *portp)
{
cdkasy_t __iomem *ap;
cdkctrl_t __iomem *cp;
@@ -2535,9 +2533,9 @@
* at the cdk header structure.
*/
-static void stli_brdpoll(stlibrd_t *brdp, cdkhdr_t __iomem *hdrp)
+static void stli_brdpoll(struct stlibrd *brdp, cdkhdr_t __iomem *hdrp)
{
- stliport_t *portp;
+ struct stliport *portp;
unsigned char hostbits[(STL_MAXCHANS / 8) + 1];
unsigned char slavebits[(STL_MAXCHANS / 8) + 1];
unsigned char __iomem *slavep;
@@ -2604,7 +2602,7 @@
static void stli_poll(unsigned long arg)
{
cdkhdr_t __iomem *hdrp;
- stlibrd_t *brdp;
+ struct stlibrd *brdp;
int brdnr;
stli_timerlist.expires = STLI_TIMEOUT;
@@ -2637,7 +2635,7 @@
* the slave.
*/
-static void stli_mkasyport(stliport_t *portp, asyport_t *pp, struct ktermios *tiosp)
+static void stli_mkasyport(struct stliport *portp, asyport_t *pp, struct ktermios *tiosp)
{
memset(pp, 0, sizeof(asyport_t));
@@ -2786,13 +2784,13 @@
* we need to do here is set up the appropriate per port data structures.
*/
-static int stli_initports(stlibrd_t *brdp)
+static int stli_initports(struct stlibrd *brdp)
{
- stliport_t *portp;
+ struct stliport *portp;
int i, panelnr, panelport;
for (i = 0, panelnr = 0, panelport = 0; (i < brdp->nrports); i++) {
- portp = kzalloc(sizeof(stliport_t), GFP_KERNEL);
+ portp = kzalloc(sizeof(struct stliport), GFP_KERNEL);
if (!portp) {
printk("STALLION: failed to allocate port structure\n");
continue;
@@ -2826,7 +2824,7 @@
* All the following routines are board specific hardware operations.
*/
-static void stli_ecpinit(stlibrd_t *brdp)
+static void stli_ecpinit(struct stlibrd *brdp)
{
unsigned long memconf;
@@ -2841,21 +2839,21 @@
/*****************************************************************************/
-static void stli_ecpenable(stlibrd_t *brdp)
+static void stli_ecpenable(struct stlibrd *brdp)
{
outb(ECP_ATENABLE, (brdp->iobase + ECP_ATCONFR));
}
/*****************************************************************************/
-static void stli_ecpdisable(stlibrd_t *brdp)
+static void stli_ecpdisable(struct stlibrd *brdp)
{
outb(ECP_ATDISABLE, (brdp->iobase + ECP_ATCONFR));
}
/*****************************************************************************/
-static void __iomem *stli_ecpgetmemptr(stlibrd_t *brdp, unsigned long offset, int line)
+static void __iomem *stli_ecpgetmemptr(struct stlibrd *brdp, unsigned long offset, int line)
{
void __iomem *ptr;
unsigned char val;
@@ -2876,7 +2874,7 @@
/*****************************************************************************/
-static void stli_ecpreset(stlibrd_t *brdp)
+static void stli_ecpreset(struct stlibrd *brdp)
{
outb(ECP_ATSTOP, (brdp->iobase + ECP_ATCONFR));
udelay(10);
@@ -2886,7 +2884,7 @@
/*****************************************************************************/
-static void stli_ecpintr(stlibrd_t *brdp)
+static void stli_ecpintr(struct stlibrd *brdp)
{
outb(0x1, brdp->iobase);
}
@@ -2897,7 +2895,7 @@
* The following set of functions act on ECP EISA boards.
*/
-static void stli_ecpeiinit(stlibrd_t *brdp)
+static void stli_ecpeiinit(struct stlibrd *brdp)
{
unsigned long memconf;
@@ -2915,21 +2913,21 @@
/*****************************************************************************/
-static void stli_ecpeienable(stlibrd_t *brdp)
+static void stli_ecpeienable(struct stlibrd *brdp)
{
outb(ECP_EIENABLE, (brdp->iobase + ECP_EICONFR));
}
/*****************************************************************************/
-static void stli_ecpeidisable(stlibrd_t *brdp)
+static void stli_ecpeidisable(struct stlibrd *brdp)
{
outb(ECP_EIDISABLE, (brdp->iobase + ECP_EICONFR));
}
/*****************************************************************************/
-static void __iomem *stli_ecpeigetmemptr(stlibrd_t *brdp, unsigned long offset, int line)
+static void __iomem *stli_ecpeigetmemptr(struct stlibrd *brdp, unsigned long offset, int line)
{
void __iomem *ptr;
unsigned char val;
@@ -2953,7 +2951,7 @@
/*****************************************************************************/
-static void stli_ecpeireset(stlibrd_t *brdp)
+static void stli_ecpeireset(struct stlibrd *brdp)
{
outb(ECP_EISTOP, (brdp->iobase + ECP_EICONFR));
udelay(10);
@@ -2967,21 +2965,21 @@
* The following set of functions act on ECP MCA boards.
*/
-static void stli_ecpmcenable(stlibrd_t *brdp)
+static void stli_ecpmcenable(struct stlibrd *brdp)
{
outb(ECP_MCENABLE, (brdp->iobase + ECP_MCCONFR));
}
/*****************************************************************************/
-static void stli_ecpmcdisable(stlibrd_t *brdp)
+static void stli_ecpmcdisable(struct stlibrd *brdp)
{
outb(ECP_MCDISABLE, (brdp->iobase + ECP_MCCONFR));
}
/*****************************************************************************/
-static void __iomem *stli_ecpmcgetmemptr(stlibrd_t *brdp, unsigned long offset, int line)
+static void __iomem *stli_ecpmcgetmemptr(struct stlibrd *brdp, unsigned long offset, int line)
{
void __iomem *ptr;
unsigned char val;
@@ -3002,7 +3000,7 @@
/*****************************************************************************/
-static void stli_ecpmcreset(stlibrd_t *brdp)
+static void stli_ecpmcreset(struct stlibrd *brdp)
{
outb(ECP_MCSTOP, (brdp->iobase + ECP_MCCONFR));
udelay(10);
@@ -3016,7 +3014,7 @@
* The following set of functions act on ECP PCI boards.
*/
-static void stli_ecppciinit(stlibrd_t *brdp)
+static void stli_ecppciinit(struct stlibrd *brdp)
{
outb(ECP_PCISTOP, (brdp->iobase + ECP_PCICONFR));
udelay(10);
@@ -3026,7 +3024,7 @@
/*****************************************************************************/
-static void __iomem *stli_ecppcigetmemptr(stlibrd_t *brdp, unsigned long offset, int line)
+static void __iomem *stli_ecppcigetmemptr(struct stlibrd *brdp, unsigned long offset, int line)
{
void __iomem *ptr;
unsigned char val;
@@ -3047,7 +3045,7 @@
/*****************************************************************************/
-static void stli_ecppcireset(stlibrd_t *brdp)
+static void stli_ecppcireset(struct stlibrd *brdp)
{
outb(ECP_PCISTOP, (brdp->iobase + ECP_PCICONFR));
udelay(10);
@@ -3061,7 +3059,7 @@
* The following routines act on ONboards.
*/
-static void stli_onbinit(stlibrd_t *brdp)
+static void stli_onbinit(struct stlibrd *brdp)
{
unsigned long memconf;
@@ -3078,21 +3076,21 @@
/*****************************************************************************/
-static void stli_onbenable(stlibrd_t *brdp)
+static void stli_onbenable(struct stlibrd *brdp)
{
outb((brdp->enabval | ONB_ATENABLE), (brdp->iobase + ONB_ATCONFR));
}
/*****************************************************************************/
-static void stli_onbdisable(stlibrd_t *brdp)
+static void stli_onbdisable(struct stlibrd *brdp)
{
outb((brdp->enabval | ONB_ATDISABLE), (brdp->iobase + ONB_ATCONFR));
}
/*****************************************************************************/
-static void __iomem *stli_onbgetmemptr(stlibrd_t *brdp, unsigned long offset, int line)
+static void __iomem *stli_onbgetmemptr(struct stlibrd *brdp, unsigned long offset, int line)
{
void __iomem *ptr;
@@ -3109,7 +3107,7 @@
/*****************************************************************************/
-static void stli_onbreset(stlibrd_t *brdp)
+static void stli_onbreset(struct stlibrd *brdp)
{
outb(ONB_ATSTOP, (brdp->iobase + ONB_ATCONFR));
udelay(10);
@@ -3123,7 +3121,7 @@
* The following routines act on ONboard EISA.
*/
-static void stli_onbeinit(stlibrd_t *brdp)
+static void stli_onbeinit(struct stlibrd *brdp)
{
unsigned long memconf;
@@ -3143,21 +3141,21 @@
/*****************************************************************************/
-static void stli_onbeenable(stlibrd_t *brdp)
+static void stli_onbeenable(struct stlibrd *brdp)
{
outb(ONB_EIENABLE, (brdp->iobase + ONB_EICONFR));
}
/*****************************************************************************/
-static void stli_onbedisable(stlibrd_t *brdp)
+static void stli_onbedisable(struct stlibrd *brdp)
{
outb(ONB_EIDISABLE, (brdp->iobase + ONB_EICONFR));
}
/*****************************************************************************/
-static void __iomem *stli_onbegetmemptr(stlibrd_t *brdp, unsigned long offset, int line)
+static void __iomem *stli_onbegetmemptr(struct stlibrd *brdp, unsigned long offset, int line)
{
void __iomem *ptr;
unsigned char val;
@@ -3181,7 +3179,7 @@
/*****************************************************************************/
-static void stli_onbereset(stlibrd_t *brdp)
+static void stli_onbereset(struct stlibrd *brdp)
{
outb(ONB_EISTOP, (brdp->iobase + ONB_EICONFR));
udelay(10);
@@ -3195,7 +3193,7 @@
* The following routines act on Brumby boards.
*/
-static void stli_bbyinit(stlibrd_t *brdp)
+static void stli_bbyinit(struct stlibrd *brdp)
{
outb(BBY_ATSTOP, (brdp->iobase + BBY_ATCONFR));
udelay(10);
@@ -3207,7 +3205,7 @@
/*****************************************************************************/
-static void __iomem *stli_bbygetmemptr(stlibrd_t *brdp, unsigned long offset, int line)
+static void __iomem *stli_bbygetmemptr(struct stlibrd *brdp, unsigned long offset, int line)
{
void __iomem *ptr;
unsigned char val;
@@ -3222,7 +3220,7 @@
/*****************************************************************************/
-static void stli_bbyreset(stlibrd_t *brdp)
+static void stli_bbyreset(struct stlibrd *brdp)
{
outb(BBY_ATSTOP, (brdp->iobase + BBY_ATCONFR));
udelay(10);
@@ -3236,7 +3234,7 @@
* The following routines act on original old Stallion boards.
*/
-static void stli_stalinit(stlibrd_t *brdp)
+static void stli_stalinit(struct stlibrd *brdp)
{
outb(0x1, brdp->iobase);
mdelay(1000);
@@ -3244,7 +3242,7 @@
/*****************************************************************************/
-static void __iomem *stli_stalgetmemptr(stlibrd_t *brdp, unsigned long offset, int line)
+static void __iomem *stli_stalgetmemptr(struct stlibrd *brdp, unsigned long offset, int line)
{
BUG_ON(offset > brdp->memsize);
return brdp->membase + (offset % STAL_PAGESIZE);
@@ -3252,7 +3250,7 @@
/*****************************************************************************/
-static void stli_stalreset(stlibrd_t *brdp)
+static void stli_stalreset(struct stlibrd *brdp)
{
u32 __iomem *vecp;
@@ -3269,7 +3267,7 @@
* board types.
*/
-static int stli_initecp(stlibrd_t *brdp)
+static int stli_initecp(struct stlibrd *brdp)
{
cdkecpsig_t sig;
cdkecpsig_t __iomem *sigsp;
@@ -3415,7 +3413,7 @@
* This handles only these board types.
*/
-static int stli_initonb(stlibrd_t *brdp)
+static int stli_initonb(struct stlibrd *brdp)
{
cdkonbsig_t sig;
cdkonbsig_t __iomem *sigsp;
@@ -3566,13 +3564,13 @@
* read in the memory map, and get the show on the road...
*/
-static int stli_startbrd(stlibrd_t *brdp)
+static int stli_startbrd(struct stlibrd *brdp)
{
cdkhdr_t __iomem *hdrp;
cdkmem_t __iomem *memp;
cdkasy_t __iomem *ap;
unsigned long flags;
- stliport_t *portp;
+ struct stliport *portp;
int portnr, nrdevs, i, rc = 0;
u32 memoff;
@@ -3673,7 +3671,7 @@
* Probe and initialize the specified board.
*/
-static int __devinit stli_brdinit(stlibrd_t *brdp)
+static int __devinit stli_brdinit(struct stlibrd *brdp)
{
stli_brds[brdp->brdnr] = brdp;
@@ -3720,7 +3718,7 @@
* might be. This is a bit if hack, but it is the best we can do.
*/
-static int stli_eisamemprobe(stlibrd_t *brdp)
+static int stli_eisamemprobe(struct stlibrd *brdp)
{
cdkecpsig_t ecpsig, __iomem *ecpsigp;
cdkonbsig_t onbsig, __iomem *onbsigp;
@@ -3835,7 +3833,7 @@
static int stli_findeisabrds(void)
{
- stlibrd_t *brdp;
+ struct stlibrd *brdp;
unsigned int iobase, eid;
int i;
@@ -3912,7 +3910,7 @@
static int __devinit stli_pciprobe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
- stlibrd_t *brdp;
+ struct stlibrd *brdp;
int retval = -EIO;
retval = pci_enable_device(pdev);
@@ -3951,7 +3949,7 @@
static void stli_pciremove(struct pci_dev *pdev)
{
- stlibrd_t *brdp = pci_get_drvdata(pdev);
+ struct stlibrd *brdp = pci_get_drvdata(pdev);
stli_cleanup_ports(brdp);
@@ -3975,14 +3973,14 @@
* Allocate a new board structure. Fill out the basic info in it.
*/
-static stlibrd_t *stli_allocbrd(void)
+static struct stlibrd *stli_allocbrd(void)
{
- stlibrd_t *brdp;
+ struct stlibrd *brdp;
- brdp = kzalloc(sizeof(stlibrd_t), GFP_KERNEL);
+ brdp = kzalloc(sizeof(struct stlibrd), GFP_KERNEL);
if (!brdp) {
printk(KERN_ERR "STALLION: failed to allocate memory "
- "(size=%Zd)\n", sizeof(stlibrd_t));
+ "(size=%Zd)\n", sizeof(struct stlibrd));
return NULL;
}
brdp->magic = STLI_BOARDMAGIC;
@@ -3998,8 +3996,8 @@
static int stli_initbrds(void)
{
- stlibrd_t *brdp, *nxtbrdp;
- stlconf_t conf;
+ struct stlibrd *brdp, *nxtbrdp;
+ struct stlconf conf;
int i, j, retval;
for (stli_nrbrds = 0; stli_nrbrds < ARRAY_SIZE(stli_brdsp);
@@ -4075,7 +4073,7 @@
{
unsigned long flags;
void __iomem *memptr;
- stlibrd_t *brdp;
+ struct stlibrd *brdp;
int brdnr, size, n;
void *p;
loff_t off = *offp;
@@ -4138,7 +4136,7 @@
{
unsigned long flags;
void __iomem *memptr;
- stlibrd_t *brdp;
+ struct stlibrd *brdp;
char __user *chbuf;
int brdnr, size, n;
void *p;
@@ -4199,7 +4197,7 @@
static int stli_getbrdstats(combrd_t __user *bp)
{
- stlibrd_t *brdp;
+ struct stlibrd *brdp;
int i;
if (copy_from_user(&stli_brdstats, bp, sizeof(combrd_t)))
@@ -4236,9 +4234,9 @@
* Resolve the referenced port number into a port struct pointer.
*/
-static stliport_t *stli_getport(int brdnr, int panelnr, int portnr)
+static struct stliport *stli_getport(int brdnr, int panelnr, int portnr)
{
- stlibrd_t *brdp;
+ struct stlibrd *brdp;
int i;
if (brdnr < 0 || brdnr >= STL_MAXBRDS)
@@ -4261,10 +4259,10 @@
* what port to get stats for (used through board control device).
*/
-static int stli_portcmdstats(stliport_t *portp)
+static int stli_portcmdstats(struct stliport *portp)
{
unsigned long flags;
- stlibrd_t *brdp;
+ struct stlibrd *brdp;
int rc;
memset(&stli_comstats, 0, sizeof(comstats_t));
@@ -4335,9 +4333,9 @@
* what port to get stats for (used through board control device).
*/
-static int stli_getportstats(stliport_t *portp, comstats_t __user *cp)
+static int stli_getportstats(struct stliport *portp, comstats_t __user *cp)
{
- stlibrd_t *brdp;
+ struct stlibrd *brdp;
int rc;
if (!portp) {
@@ -4366,9 +4364,9 @@
* Clear the port stats structure. We also return it zeroed out...
*/
-static int stli_clrportstats(stliport_t *portp, comstats_t __user *cp)
+static int stli_clrportstats(struct stliport *portp, comstats_t __user *cp)
{
- stlibrd_t *brdp;
+ struct stlibrd *brdp;
int rc;
if (!portp) {
@@ -4405,17 +4403,17 @@
* Return the entire driver ports structure to a user app.
*/
-static int stli_getportstruct(stliport_t __user *arg)
+static int stli_getportstruct(struct stliport __user *arg)
{
- stliport_t *portp;
+ struct stliport *portp;
- if (copy_from_user(&stli_dummyport, arg, sizeof(stliport_t)))
+ if (copy_from_user(&stli_dummyport, arg, sizeof(struct stliport)))
return -EFAULT;
portp = stli_getport(stli_dummyport.brdnr, stli_dummyport.panelnr,
stli_dummyport.portnr);
if (!portp)
return -ENODEV;
- if (copy_to_user(arg, portp, sizeof(stliport_t)))
+ if (copy_to_user(arg, portp, sizeof(struct stliport)))
return -EFAULT;
return 0;
}
@@ -4426,18 +4424,18 @@
* Return the entire driver board structure to a user app.
*/
-static int stli_getbrdstruct(stlibrd_t __user *arg)
+static int stli_getbrdstruct(struct stlibrd __user *arg)
{
- stlibrd_t *brdp;
+ struct stlibrd *brdp;
- if (copy_from_user(&stli_dummybrd, arg, sizeof(stlibrd_t)))
+ if (copy_from_user(&stli_dummybrd, arg, sizeof(struct stlibrd)))
return -EFAULT;
if ((stli_dummybrd.brdnr < 0) || (stli_dummybrd.brdnr >= STL_MAXBRDS))
return -ENODEV;
brdp = stli_brds[stli_dummybrd.brdnr];
if (!brdp)
return -ENODEV;
- if (copy_to_user(arg, brdp, sizeof(stlibrd_t)))
+ if (copy_to_user(arg, brdp, sizeof(struct stlibrd)))
return -EFAULT;
return 0;
}
@@ -4452,7 +4450,7 @@
static int stli_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, unsigned long arg)
{
- stlibrd_t *brdp;
+ struct stlibrd *brdp;
int brdnr, rc, done;
void __user *argp = (void __user *)arg;
diff --git a/include/linux/istallion.h b/include/linux/istallion.h
index b55e2a0..af2c32d 100644
--- a/include/linux/istallion.h
+++ b/include/linux/istallion.h
@@ -49,7 +49,7 @@
* communication with the slave board will always be on a per port
* basis.
*/
-typedef struct {
+struct stliport {
unsigned long magic;
int portnr;
int panelnr;
@@ -72,7 +72,7 @@
wait_queue_head_t close_wait;
wait_queue_head_t raw_wait;
struct work_struct tqhangup;
- asysigs_t asig;
+ struct asysigs asig;
unsigned long addr;
unsigned long rxoffset;
unsigned long txoffset;
@@ -83,13 +83,13 @@
unsigned char reqbit;
unsigned char portidx;
unsigned char portbit;
-} stliport_t;
+};
/*
* Use a structure of function pointers to do board level operations.
* These include, enable/disable, paging shared memory, interrupting, etc.
*/
-typedef struct stlibrd {
+struct stlibrd {
unsigned long magic;
int brdnr;
int brdtype;
@@ -116,8 +116,8 @@
void __iomem *(*getmemptr)(struct stlibrd *brdp, unsigned long offset, int line);
void (*intr)(struct stlibrd *brdp);
void (*reset)(struct stlibrd *brdp);
- stliport_t *ports[STL_MAXPORTS];
-} stlibrd_t;
+ struct stliport *ports[STL_MAXPORTS];
+};
/*