[PATCH] acpiphp: add dock event handling
These patches add generic dock event handling to acpiphp. If there are
pci devices that need to be inserted/removed after the dock event, the
event notification will be handed down to the normal pci hotplug event
handler in acpiphp so that new bridges/devices can be enumerated.
Because some dock stations do not have pci bridges or pci devices that
need to be inserted after a dock, acpiphp will remain loaded to handle
dock events even if no hotpluggable pci slots are discovered.
You probably need to have the pci=assign-busses kernel parameter enabled
to use these patches, and you may not allow ibm_acpi to handle docking
notifications and use this patch.
This patch incorporates feedback provided by many.
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index fe0a6b7..22d0f1c 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -57,7 +57,6 @@
#define MY_NAME "acpiphp_glue"
static void handle_hotplug_event_bridge (acpi_handle, u32, void *);
-static void handle_hotplug_event_func (acpi_handle, u32, void *);
static void acpiphp_sanitize_bus(struct pci_bus *bus);
static void acpiphp_set_hpp_values(acpi_handle handle, struct pci_bus *bus);
@@ -125,6 +124,7 @@
struct acpiphp_bridge *bridge = (struct acpiphp_bridge *)context;
struct acpiphp_slot *slot;
struct acpiphp_func *newfunc;
+ struct dependent_device *dd;
acpi_handle tmp;
acpi_status status = AE_OK;
unsigned long adr, sun;
@@ -138,7 +138,7 @@
status = acpi_get_handle(handle, "_EJ0", &tmp);
- if (ACPI_FAILURE(status))
+ if (ACPI_FAILURE(status) && !(is_dependent_device(handle)))
return AE_OK;
device = (adr >> 16) & 0xffff;
@@ -152,7 +152,8 @@
INIT_LIST_HEAD(&newfunc->sibling);
newfunc->handle = handle;
newfunc->function = function;
- newfunc->flags = FUNC_HAS_EJ0;
+ if (ACPI_SUCCESS(status))
+ newfunc->flags = FUNC_HAS_EJ0;
if (ACPI_SUCCESS(acpi_get_handle(handle, "_STA", &tmp)))
newfunc->flags |= FUNC_HAS_STA;
@@ -163,6 +164,19 @@
if (ACPI_SUCCESS(acpi_get_handle(handle, "_PS3", &tmp)))
newfunc->flags |= FUNC_HAS_PS3;
+ if (ACPI_SUCCESS(acpi_get_handle(handle, "_DCK", &tmp))) {
+ newfunc->flags |= FUNC_HAS_DCK;
+ /* add to devices dependent on dock station,
+ * because this may actually be the dock bridge
+ */
+ dd = alloc_dependent_device(handle);
+ if (!dd)
+ err("Can't allocate memory for "
+ "new dependent device!\n");
+ else
+ add_dependent_device(dd);
+ }
+
status = acpi_evaluate_integer(handle, "_SUN", NULL, &sun);
if (ACPI_FAILURE(status))
sun = -1;
@@ -210,18 +224,35 @@
slot->flags |= (SLOT_ENABLED | SLOT_POWEREDON);
}
+ /* if this is a device dependent on a dock station,
+ * associate the acpiphp_func to the dependent_device
+ * struct.
+ */
+ if ((dd = get_dependent_device(handle))) {
+ newfunc->flags |= FUNC_IS_DD;
+ /*
+ * we don't want any devices which is dependent
+ * on the dock to have it's _EJ0 method executed.
+ * because we need to run _DCK first.
+ */
+ newfunc->flags &= ~FUNC_HAS_EJ0;
+ dd->func = newfunc;
+ add_pci_dependent_device(dd);
+ }
+
/* install notify handler */
- status = acpi_install_notify_handler(handle,
+ if (!(newfunc->flags & FUNC_HAS_DCK)) {
+ status = acpi_install_notify_handler(handle,
ACPI_SYSTEM_NOTIFY,
handle_hotplug_event_func,
newfunc);
- if (ACPI_FAILURE(status)) {
- err("failed to register interrupt notify handler\n");
- return status;
- }
+ if (ACPI_FAILURE(status))
+ err("failed to register interrupt notify handler\n");
+ } else
+ status = AE_OK;
- return AE_OK;
+ return status;
}
@@ -410,7 +441,8 @@
goto out;
/* check if this bridge has ejectable slots */
- if (detect_ejectable_slots(handle) > 0) {
+ if ((detect_ejectable_slots(handle) > 0) ||
+ (detect_dependent_devices(handle) > 0)) {
dbg("found PCI-to-PCI bridge at PCI %s\n", pci_name(dev));
add_p2p_bridge(handle, dev);
}
@@ -512,11 +544,13 @@
list_for_each_safe (list, tmp, &slot->funcs) {
struct acpiphp_func *func;
func = list_entry(list, struct acpiphp_func, sibling);
- status = acpi_remove_notify_handler(func->handle,
+ if (!(func->flags & FUNC_HAS_DCK)) {
+ status = acpi_remove_notify_handler(func->handle,
ACPI_SYSTEM_NOTIFY,
handle_hotplug_event_func);
- if (ACPI_FAILURE(status))
- err("failed to remove notify handler\n");
+ if (ACPI_FAILURE(status))
+ err("failed to remove notify handler\n");
+ }
pci_dev_put(func->pci_dev);
list_del(list);
kfree(func);
@@ -828,14 +862,21 @@
dbg("no parent device, assuming NULL\n");
pdevice = NULL;
}
- if (acpi_bus_get_device(func->handle, &device)) {
- ret_val = acpi_bus_add(&device, pdevice, func->handle,
- ACPI_BUS_TYPE_DEVICE);
- if (ret_val) {
- dbg("error adding bus, %x\n",
- -ret_val);
- goto acpiphp_bus_add_out;
- }
+ if (!acpi_bus_get_device(func->handle, &device)) {
+ dbg("bus exists... trim\n");
+ /* this shouldn't be in here, so remove
+ * the bus then re-add it...
+ */
+ ret_val = acpi_bus_trim(device, 1);
+ dbg("acpi_bus_trim return %x\n", ret_val);
+ }
+
+ ret_val = acpi_bus_add(&device, pdevice, func->handle,
+ ACPI_BUS_TYPE_DEVICE);
+ if (ret_val) {
+ dbg("error adding bus, %x\n",
+ -ret_val);
+ goto acpiphp_bus_add_out;
}
/*
* try to start anyway. We could have failed to add
@@ -1307,7 +1348,7 @@
* handles ACPI event notification on slots
*
*/
-static void handle_hotplug_event_func(acpi_handle handle, u32 type, void *context)
+void handle_hotplug_event_func(acpi_handle handle, u32 type, void *context)
{
struct acpiphp_func *func;
char objname[64];