| /* |
| * builtin-stat.c |
| * |
| * Builtin stat command: Give a precise performance counters summary |
| * overview about any workload, CPU or specific PID. |
| * |
| * Sample output: |
| |
| $ perf stat ./hackbench 10 |
| |
| Time: 0.118 |
| |
| Performance counter stats for './hackbench 10': |
| |
| 1708.761321 task-clock # 11.037 CPUs utilized |
| 41,190 context-switches # 0.024 M/sec |
| 6,735 CPU-migrations # 0.004 M/sec |
| 17,318 page-faults # 0.010 M/sec |
| 5,205,202,243 cycles # 3.046 GHz |
| 3,856,436,920 stalled-cycles-frontend # 74.09% frontend cycles idle |
| 1,600,790,871 stalled-cycles-backend # 30.75% backend cycles idle |
| 2,603,501,247 instructions # 0.50 insns per cycle |
| # 1.48 stalled cycles per insn |
| 484,357,498 branches # 283.455 M/sec |
| 6,388,934 branch-misses # 1.32% of all branches |
| |
| 0.154822978 seconds time elapsed |
| |
| * |
| * Copyright (C) 2008-2011, Red Hat Inc, Ingo Molnar <mingo@redhat.com> |
| * |
| * Improvements and fixes by: |
| * |
| * Arjan van de Ven <arjan@linux.intel.com> |
| * Yanmin Zhang <yanmin.zhang@intel.com> |
| * Wu Fengguang <fengguang.wu@intel.com> |
| * Mike Galbraith <efault@gmx.de> |
| * Paul Mackerras <paulus@samba.org> |
| * Jaswinder Singh Rajput <jaswinder@kernel.org> |
| * |
| * Released under the GPL v2. (and only v2, not any later version) |
| */ |
| |
| #include "perf.h" |
| #include "builtin.h" |
| #include "util/cgroup.h" |
| #include "util/util.h" |
| #include "util/parse-options.h" |
| #include "util/parse-events.h" |
| #include "util/pmu.h" |
| #include "util/event.h" |
| #include "util/evlist.h" |
| #include "util/evsel.h" |
| #include "util/debug.h" |
| #include "util/color.h" |
| #include "util/stat.h" |
| #include "util/header.h" |
| #include "util/cpumap.h" |
| #include "util/thread.h" |
| #include "util/thread_map.h" |
| |
| #include <stdlib.h> |
| #include <sys/prctl.h> |
| #include <locale.h> |
| |
| #define DEFAULT_SEPARATOR " " |
| #define CNTR_NOT_SUPPORTED "<not supported>" |
| #define CNTR_NOT_COUNTED "<not counted>" |
| |
| static void print_counters(struct timespec *ts, int argc, const char **argv); |
| |
| /* Default events used for perf stat -T */ |
| static const char *transaction_attrs = { |
| "task-clock," |
| "{" |
| "instructions," |
| "cycles," |
| "cpu/cycles-t/," |
| "cpu/tx-start/," |
| "cpu/el-start/," |
| "cpu/cycles-ct/" |
| "}" |
| }; |
| |
| /* More limited version when the CPU does not have all events. */ |
| static const char * transaction_limited_attrs = { |
| "task-clock," |
| "{" |
| "instructions," |
| "cycles," |
| "cpu/cycles-t/," |
| "cpu/tx-start/" |
| "}" |
| }; |
| |
| static struct perf_evlist *evsel_list; |
| |
| static struct target target = { |
| .uid = UINT_MAX, |
| }; |
| |
| static int run_count = 1; |
| static bool no_inherit = false; |
| static bool scale = true; |
| static enum aggr_mode aggr_mode = AGGR_GLOBAL; |
| static volatile pid_t child_pid = -1; |
| static bool null_run = false; |
| static int detailed_run = 0; |
| static bool transaction_run; |
| static bool big_num = true; |
| static int big_num_opt = -1; |
| static const char *csv_sep = NULL; |
| static bool csv_output = false; |
| static bool group = false; |
| static FILE *output = NULL; |
| static const char *pre_cmd = NULL; |
| static const char *post_cmd = NULL; |
| static bool sync_run = false; |
| static unsigned int interval = 0; |
| static unsigned int initial_delay = 0; |
| static unsigned int unit_width = 4; /* strlen("unit") */ |
| static bool forever = false; |
| static struct timespec ref_time; |
| static struct cpu_map *aggr_map; |
| static int (*aggr_get_id)(struct cpu_map *m, int cpu); |
| |
| static volatile int done = 0; |
| |
| static inline void diff_timespec(struct timespec *r, struct timespec *a, |
| struct timespec *b) |
| { |
| r->tv_sec = a->tv_sec - b->tv_sec; |
| if (a->tv_nsec < b->tv_nsec) { |
| r->tv_nsec = a->tv_nsec + 1000000000L - b->tv_nsec; |
| r->tv_sec--; |
| } else { |
| r->tv_nsec = a->tv_nsec - b->tv_nsec ; |
| } |
| } |
| |
| static void perf_stat__reset_stats(void) |
| { |
| perf_evlist__reset_stats(evsel_list); |
| perf_stat__reset_shadow_stats(); |
| } |
| |
| static int create_perf_stat_counter(struct perf_evsel *evsel) |
| { |
| struct perf_event_attr *attr = &evsel->attr; |
| |
| if (scale) |
| attr->read_format = PERF_FORMAT_TOTAL_TIME_ENABLED | |
| PERF_FORMAT_TOTAL_TIME_RUNNING; |
| |
| attr->inherit = !no_inherit; |
| |
| if (target__has_cpu(&target)) |
| return perf_evsel__open_per_cpu(evsel, perf_evsel__cpus(evsel)); |
| |
| if (!target__has_task(&target) && perf_evsel__is_group_leader(evsel)) { |
| attr->disabled = 1; |
| if (!initial_delay) |
| attr->enable_on_exec = 1; |
| } |
| |
| return perf_evsel__open_per_thread(evsel, evsel_list->threads); |
| } |
| |
| /* |
| * Does the counter have nsecs as a unit? |
| */ |
| static inline int nsec_counter(struct perf_evsel *evsel) |
| { |
| if (perf_evsel__match(evsel, SOFTWARE, SW_CPU_CLOCK) || |
| perf_evsel__match(evsel, SOFTWARE, SW_TASK_CLOCK)) |
| return 1; |
| |
| return 0; |
| } |
| |
| static void zero_per_pkg(struct perf_evsel *counter) |
| { |
| if (counter->per_pkg_mask) |
| memset(counter->per_pkg_mask, 0, MAX_NR_CPUS); |
| } |
| |
| static int check_per_pkg(struct perf_evsel *counter, int cpu, bool *skip) |
| { |
| unsigned long *mask = counter->per_pkg_mask; |
| struct cpu_map *cpus = perf_evsel__cpus(counter); |
| int s; |
| |
| *skip = false; |
| |
| if (!counter->per_pkg) |
| return 0; |
| |
| if (cpu_map__empty(cpus)) |
| return 0; |
| |
| if (!mask) { |
| mask = zalloc(MAX_NR_CPUS); |
| if (!mask) |
| return -ENOMEM; |
| |
| counter->per_pkg_mask = mask; |
| } |
| |
| s = cpu_map__get_socket(cpus, cpu); |
| if (s < 0) |
| return -1; |
| |
| *skip = test_and_set_bit(s, mask) == 1; |
| return 0; |
| } |
| |
| static int |
| process_counter_values(struct perf_evsel *evsel, int cpu, int thread, |
| struct perf_counts_values *count) |
| { |
| struct perf_counts_values *aggr = &evsel->counts->aggr; |
| static struct perf_counts_values zero; |
| bool skip = false; |
| |
| if (check_per_pkg(evsel, cpu, &skip)) { |
| pr_err("failed to read per-pkg counter\n"); |
| return -1; |
| } |
| |
| if (skip) |
| count = &zero; |
| |
| switch (aggr_mode) { |
| case AGGR_THREAD: |
| case AGGR_CORE: |
| case AGGR_SOCKET: |
| case AGGR_NONE: |
| if (!evsel->snapshot) |
| perf_evsel__compute_deltas(evsel, cpu, thread, count); |
| perf_counts_values__scale(count, scale, NULL); |
| if (aggr_mode == AGGR_NONE) |
| perf_stat__update_shadow_stats(evsel, count->values, cpu); |
| break; |
| case AGGR_GLOBAL: |
| aggr->val += count->val; |
| if (scale) { |
| aggr->ena += count->ena; |
| aggr->run += count->run; |
| } |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int process_counter_maps(struct perf_evsel *counter) |
| { |
| int nthreads = thread_map__nr(counter->threads); |
| int ncpus = perf_evsel__nr_cpus(counter); |
| int cpu, thread; |
| |
| if (counter->system_wide) |
| nthreads = 1; |
| |
| for (thread = 0; thread < nthreads; thread++) { |
| for (cpu = 0; cpu < ncpus; cpu++) { |
| if (process_counter_values(counter, cpu, thread, |
| perf_counts(counter->counts, cpu, thread))) |
| return -1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int process_counter(struct perf_evsel *counter) |
| { |
| struct perf_counts_values *aggr = &counter->counts->aggr; |
| struct perf_stat *ps = counter->priv; |
| u64 *count = counter->counts->aggr.values; |
| int i, ret; |
| |
| aggr->val = aggr->ena = aggr->run = 0; |
| init_stats(ps->res_stats); |
| |
| if (counter->per_pkg) |
| zero_per_pkg(counter); |
| |
| ret = process_counter_maps(counter); |
| if (ret) |
| return ret; |
| |
| if (aggr_mode != AGGR_GLOBAL) |
| return 0; |
| |
| if (!counter->snapshot) |
| perf_evsel__compute_deltas(counter, -1, -1, aggr); |
| perf_counts_values__scale(aggr, scale, &counter->counts->scaled); |
| |
| for (i = 0; i < 3; i++) |
| update_stats(&ps->res_stats[i], count[i]); |
| |
| if (verbose) { |
| fprintf(output, "%s: %" PRIu64 " %" PRIu64 " %" PRIu64 "\n", |
| perf_evsel__name(counter), count[0], count[1], count[2]); |
| } |
| |
| /* |
| * Save the full runtime - to allow normalization during printout: |
| */ |
| perf_stat__update_shadow_stats(counter, count, 0); |
| |
| return 0; |
| } |
| |
| /* |
| * Read out the results of a single counter: |
| * do not aggregate counts across CPUs in system-wide mode |
| */ |
| static int read_counter(struct perf_evsel *counter) |
| { |
| int nthreads = thread_map__nr(evsel_list->threads); |
| int ncpus = perf_evsel__nr_cpus(counter); |
| int cpu, thread; |
| |
| if (!counter->supported) |
| return -ENOENT; |
| |
| if (counter->system_wide) |
| nthreads = 1; |
| |
| for (thread = 0; thread < nthreads; thread++) { |
| for (cpu = 0; cpu < ncpus; cpu++) { |
| struct perf_counts_values *count; |
| |
| count = perf_counts(counter->counts, cpu, thread); |
| if (perf_evsel__read(counter, cpu, thread, count)) |
| return -1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void read_counters(bool close_counters) |
| { |
| struct perf_evsel *counter; |
| |
| evlist__for_each(evsel_list, counter) { |
| if (read_counter(counter)) |
| pr_warning("failed to read counter %s\n", counter->name); |
| |
| if (process_counter(counter)) |
| pr_warning("failed to process counter %s\n", counter->name); |
| |
| if (close_counters) { |
| perf_evsel__close_fd(counter, perf_evsel__nr_cpus(counter), |
| thread_map__nr(evsel_list->threads)); |
| } |
| } |
| } |
| |
| static void process_interval(void) |
| { |
| struct timespec ts, rs; |
| |
| read_counters(false); |
| |
| clock_gettime(CLOCK_MONOTONIC, &ts); |
| diff_timespec(&rs, &ts, &ref_time); |
| |
| print_counters(&rs, 0, NULL); |
| } |
| |
| static void handle_initial_delay(void) |
| { |
| struct perf_evsel *counter; |
| |
| if (initial_delay) { |
| const int ncpus = cpu_map__nr(evsel_list->cpus), |
| nthreads = thread_map__nr(evsel_list->threads); |
| |
| usleep(initial_delay * 1000); |
| evlist__for_each(evsel_list, counter) |
| perf_evsel__enable(counter, ncpus, nthreads); |
| } |
| } |
| |
| static volatile int workload_exec_errno; |
| |
| /* |
| * perf_evlist__prepare_workload will send a SIGUSR1 |
| * if the fork fails, since we asked by setting its |
| * want_signal to true. |
| */ |
| static void workload_exec_failed_signal(int signo __maybe_unused, siginfo_t *info, |
| void *ucontext __maybe_unused) |
| { |
| workload_exec_errno = info->si_value.sival_int; |
| } |
| |
| static int __run_perf_stat(int argc, const char **argv) |
| { |
| char msg[512]; |
| unsigned long long t0, t1; |
| struct perf_evsel *counter; |
| struct timespec ts; |
| size_t l; |
| int status = 0; |
| const bool forks = (argc > 0); |
| |
| if (interval) { |
| ts.tv_sec = interval / 1000; |
| ts.tv_nsec = (interval % 1000) * 1000000; |
| } else { |
| ts.tv_sec = 1; |
| ts.tv_nsec = 0; |
| } |
| |
| if (forks) { |
| if (perf_evlist__prepare_workload(evsel_list, &target, argv, false, |
| workload_exec_failed_signal) < 0) { |
| perror("failed to prepare workload"); |
| return -1; |
| } |
| child_pid = evsel_list->workload.pid; |
| } |
| |
| if (group) |
| perf_evlist__set_leader(evsel_list); |
| |
| evlist__for_each(evsel_list, counter) { |
| if (create_perf_stat_counter(counter) < 0) { |
| /* |
| * PPC returns ENXIO for HW counters until 2.6.37 |
| * (behavior changed with commit b0a873e). |
| */ |
| if (errno == EINVAL || errno == ENOSYS || |
| errno == ENOENT || errno == EOPNOTSUPP || |
| errno == ENXIO) { |
| if (verbose) |
| ui__warning("%s event is not supported by the kernel.\n", |
| perf_evsel__name(counter)); |
| counter->supported = false; |
| |
| if ((counter->leader != counter) || |
| !(counter->leader->nr_members > 1)) |
| continue; |
| } |
| |
| perf_evsel__open_strerror(counter, &target, |
| errno, msg, sizeof(msg)); |
| ui__error("%s\n", msg); |
| |
| if (child_pid != -1) |
| kill(child_pid, SIGTERM); |
| |
| return -1; |
| } |
| counter->supported = true; |
| |
| l = strlen(counter->unit); |
| if (l > unit_width) |
| unit_width = l; |
| } |
| |
| if (perf_evlist__apply_filters(evsel_list, &counter)) { |
| error("failed to set filter \"%s\" on event %s with %d (%s)\n", |
| counter->filter, perf_evsel__name(counter), errno, |
| strerror_r(errno, msg, sizeof(msg))); |
| return -1; |
| } |
| |
| /* |
| * Enable counters and exec the command: |
| */ |
| t0 = rdclock(); |
| clock_gettime(CLOCK_MONOTONIC, &ref_time); |
| |
| if (forks) { |
| perf_evlist__start_workload(evsel_list); |
| handle_initial_delay(); |
| |
| if (interval) { |
| while (!waitpid(child_pid, &status, WNOHANG)) { |
| nanosleep(&ts, NULL); |
| process_interval(); |
| } |
| } |
| wait(&status); |
| |
| if (workload_exec_errno) { |
| const char *emsg = strerror_r(workload_exec_errno, msg, sizeof(msg)); |
| pr_err("Workload failed: %s\n", emsg); |
| return -1; |
| } |
| |
| if (WIFSIGNALED(status)) |
| psignal(WTERMSIG(status), argv[0]); |
| } else { |
| handle_initial_delay(); |
| while (!done) { |
| nanosleep(&ts, NULL); |
| if (interval) |
| process_interval(); |
| } |
| } |
| |
| t1 = rdclock(); |
| |
| update_stats(&walltime_nsecs_stats, t1 - t0); |
| |
| read_counters(true); |
| |
| return WEXITSTATUS(status); |
| } |
| |
| static int run_perf_stat(int argc, const char **argv) |
| { |
| int ret; |
| |
| if (pre_cmd) { |
| ret = system(pre_cmd); |
| if (ret) |
| return ret; |
| } |
| |
| if (sync_run) |
| sync(); |
| |
| ret = __run_perf_stat(argc, argv); |
| if (ret) |
| return ret; |
| |
| if (post_cmd) { |
| ret = system(post_cmd); |
| if (ret) |
| return ret; |
| } |
| |
| return ret; |
| } |
| |
| static void print_running(u64 run, u64 ena) |
| { |
| if (csv_output) { |
| fprintf(output, "%s%" PRIu64 "%s%.2f", |
| csv_sep, |
| run, |
| csv_sep, |
| ena ? 100.0 * run / ena : 100.0); |
| } else if (run != ena) { |
| fprintf(output, " (%.2f%%)", 100.0 * run / ena); |
| } |
| } |
| |
| static void print_noise_pct(double total, double avg) |
| { |
| double pct = rel_stddev_stats(total, avg); |
| |
| if (csv_output) |
| fprintf(output, "%s%.2f%%", csv_sep, pct); |
| else if (pct) |
| fprintf(output, " ( +-%6.2f%% )", pct); |
| } |
| |
| static void print_noise(struct perf_evsel *evsel, double avg) |
| { |
| struct perf_stat *ps; |
| |
| if (run_count == 1) |
| return; |
| |
| ps = evsel->priv; |
| print_noise_pct(stddev_stats(&ps->res_stats[0]), avg); |
| } |
| |
| static void aggr_printout(struct perf_evsel *evsel, int id, int nr) |
| { |
| switch (aggr_mode) { |
| case AGGR_CORE: |
| fprintf(output, "S%d-C%*d%s%*d%s", |
| cpu_map__id_to_socket(id), |
| csv_output ? 0 : -8, |
| cpu_map__id_to_cpu(id), |
| csv_sep, |
| csv_output ? 0 : 4, |
| nr, |
| csv_sep); |
| break; |
| case AGGR_SOCKET: |
| fprintf(output, "S%*d%s%*d%s", |
| csv_output ? 0 : -5, |
| id, |
| csv_sep, |
| csv_output ? 0 : 4, |
| nr, |
| csv_sep); |
| break; |
| case AGGR_NONE: |
| fprintf(output, "CPU%*d%s", |
| csv_output ? 0 : -4, |
| perf_evsel__cpus(evsel)->map[id], csv_sep); |
| break; |
| case AGGR_THREAD: |
| fprintf(output, "%*s-%*d%s", |
| csv_output ? 0 : 16, |
| thread_map__comm(evsel->threads, id), |
| csv_output ? 0 : -8, |
| thread_map__pid(evsel->threads, id), |
| csv_sep); |
| break; |
| case AGGR_GLOBAL: |
| default: |
| break; |
| } |
| } |
| |
| static void nsec_printout(int id, int nr, struct perf_evsel *evsel, double avg) |
| { |
| double msecs = avg / 1e6; |
| const char *fmt_v, *fmt_n; |
| char name[25]; |
| |
| fmt_v = csv_output ? "%.6f%s" : "%18.6f%s"; |
| fmt_n = csv_output ? "%s" : "%-25s"; |
| |
| aggr_printout(evsel, id, nr); |
| |
| scnprintf(name, sizeof(name), "%s%s", |
| perf_evsel__name(evsel), csv_output ? "" : " (msec)"); |
| |
| fprintf(output, fmt_v, msecs, csv_sep); |
| |
| if (csv_output) |
| fprintf(output, "%s%s", evsel->unit, csv_sep); |
| else |
| fprintf(output, "%-*s%s", unit_width, evsel->unit, csv_sep); |
| |
| fprintf(output, fmt_n, name); |
| |
| if (evsel->cgrp) |
| fprintf(output, "%s%s", csv_sep, evsel->cgrp->name); |
| |
| if (csv_output || interval) |
| return; |
| |
| if (perf_evsel__match(evsel, SOFTWARE, SW_TASK_CLOCK)) |
| fprintf(output, " # %8.3f CPUs utilized ", |
| avg / avg_stats(&walltime_nsecs_stats)); |
| else |
| fprintf(output, " "); |
| } |
| |
| static void abs_printout(int id, int nr, struct perf_evsel *evsel, double avg) |
| { |
| double sc = evsel->scale; |
| const char *fmt; |
| int cpu = cpu_map__id_to_cpu(id); |
| |
| if (csv_output) { |
| fmt = sc != 1.0 ? "%.2f%s" : "%.0f%s"; |
| } else { |
| if (big_num) |
| fmt = sc != 1.0 ? "%'18.2f%s" : "%'18.0f%s"; |
| else |
| fmt = sc != 1.0 ? "%18.2f%s" : "%18.0f%s"; |
| } |
| |
| aggr_printout(evsel, id, nr); |
| |
| if (aggr_mode == AGGR_GLOBAL) |
| cpu = 0; |
| |
| fprintf(output, fmt, avg, csv_sep); |
| |
| if (evsel->unit) |
| fprintf(output, "%-*s%s", |
| csv_output ? 0 : unit_width, |
| evsel->unit, csv_sep); |
| |
| fprintf(output, "%-*s", csv_output ? 0 : 25, perf_evsel__name(evsel)); |
| |
| if (evsel->cgrp) |
| fprintf(output, "%s%s", csv_sep, evsel->cgrp->name); |
| |
| if (csv_output || interval) |
| return; |
| |
| perf_stat__print_shadow_stats(output, evsel, avg, cpu, aggr_mode); |
| } |
| |
| static void print_aggr(char *prefix) |
| { |
| struct perf_evsel *counter; |
| int cpu, cpu2, s, s2, id, nr; |
| double uval; |
| u64 ena, run, val; |
| |
| if (!(aggr_map || aggr_get_id)) |
| return; |
| |
| for (s = 0; s < aggr_map->nr; s++) { |
| id = aggr_map->map[s]; |
| evlist__for_each(evsel_list, counter) { |
| val = ena = run = 0; |
| nr = 0; |
| for (cpu = 0; cpu < perf_evsel__nr_cpus(counter); cpu++) { |
| cpu2 = perf_evsel__cpus(counter)->map[cpu]; |
| s2 = aggr_get_id(evsel_list->cpus, cpu2); |
| if (s2 != id) |
| continue; |
| val += perf_counts(counter->counts, cpu, 0)->val; |
| ena += perf_counts(counter->counts, cpu, 0)->ena; |
| run += perf_counts(counter->counts, cpu, 0)->run; |
| nr++; |
| } |
| if (prefix) |
| fprintf(output, "%s", prefix); |
| |
| if (run == 0 || ena == 0) { |
| aggr_printout(counter, id, nr); |
| |
| fprintf(output, "%*s%s", |
| csv_output ? 0 : 18, |
| counter->supported ? CNTR_NOT_COUNTED : CNTR_NOT_SUPPORTED, |
| csv_sep); |
| |
| fprintf(output, "%-*s%s", |
| csv_output ? 0 : unit_width, |
| counter->unit, csv_sep); |
| |
| fprintf(output, "%*s", |
| csv_output ? 0 : -25, |
| perf_evsel__name(counter)); |
| |
| if (counter->cgrp) |
| fprintf(output, "%s%s", |
| csv_sep, counter->cgrp->name); |
| |
| print_running(run, ena); |
| fputc('\n', output); |
| continue; |
| } |
| uval = val * counter->scale; |
| |
| if (nsec_counter(counter)) |
| nsec_printout(id, nr, counter, uval); |
| else |
| abs_printout(id, nr, counter, uval); |
| |
| if (!csv_output) |
| print_noise(counter, 1.0); |
| |
| print_running(run, ena); |
| fputc('\n', output); |
| } |
| } |
| } |
| |
| static void print_aggr_thread(struct perf_evsel *counter, char *prefix) |
| { |
| int nthreads = thread_map__nr(counter->threads); |
| int ncpus = cpu_map__nr(counter->cpus); |
| int cpu, thread; |
| double uval; |
| |
| for (thread = 0; thread < nthreads; thread++) { |
| u64 ena = 0, run = 0, val = 0; |
| |
| for (cpu = 0; cpu < ncpus; cpu++) { |
| val += perf_counts(counter->counts, cpu, thread)->val; |
| ena += perf_counts(counter->counts, cpu, thread)->ena; |
| run += perf_counts(counter->counts, cpu, thread)->run; |
| } |
| |
| if (prefix) |
| fprintf(output, "%s", prefix); |
| |
| uval = val * counter->scale; |
| |
| if (nsec_counter(counter)) |
| nsec_printout(thread, 0, counter, uval); |
| else |
| abs_printout(thread, 0, counter, uval); |
| |
| if (!csv_output) |
| print_noise(counter, 1.0); |
| |
| print_running(run, ena); |
| fputc('\n', output); |
| } |
| } |
| |
| /* |
| * Print out the results of a single counter: |
| * aggregated counts in system-wide mode |
| */ |
| static void print_counter_aggr(struct perf_evsel *counter, char *prefix) |
| { |
| struct perf_stat *ps = counter->priv; |
| double avg = avg_stats(&ps->res_stats[0]); |
| int scaled = counter->counts->scaled; |
| double uval; |
| double avg_enabled, avg_running; |
| |
| avg_enabled = avg_stats(&ps->res_stats[1]); |
| avg_running = avg_stats(&ps->res_stats[2]); |
| |
| if (prefix) |
| fprintf(output, "%s", prefix); |
| |
| if (scaled == -1 || !counter->supported) { |
| fprintf(output, "%*s%s", |
| csv_output ? 0 : 18, |
| counter->supported ? CNTR_NOT_COUNTED : CNTR_NOT_SUPPORTED, |
| csv_sep); |
| fprintf(output, "%-*s%s", |
| csv_output ? 0 : unit_width, |
| counter->unit, csv_sep); |
| fprintf(output, "%*s", |
| csv_output ? 0 : -25, |
| perf_evsel__name(counter)); |
| |
| if (counter->cgrp) |
| fprintf(output, "%s%s", csv_sep, counter->cgrp->name); |
| |
| print_running(avg_running, avg_enabled); |
| fputc('\n', output); |
| return; |
| } |
| |
| uval = avg * counter->scale; |
| |
| if (nsec_counter(counter)) |
| nsec_printout(-1, 0, counter, uval); |
| else |
| abs_printout(-1, 0, counter, uval); |
| |
| print_noise(counter, avg); |
| |
| print_running(avg_running, avg_enabled); |
| fprintf(output, "\n"); |
| } |
| |
| /* |
| * Print out the results of a single counter: |
| * does not use aggregated count in system-wide |
| */ |
| static void print_counter(struct perf_evsel *counter, char *prefix) |
| { |
| u64 ena, run, val; |
| double uval; |
| int cpu; |
| |
| for (cpu = 0; cpu < perf_evsel__nr_cpus(counter); cpu++) { |
| val = perf_counts(counter->counts, cpu, 0)->val; |
| ena = perf_counts(counter->counts, cpu, 0)->ena; |
| run = perf_counts(counter->counts, cpu, 0)->run; |
| |
| if (prefix) |
| fprintf(output, "%s", prefix); |
| |
| if (run == 0 || ena == 0) { |
| fprintf(output, "CPU%*d%s%*s%s", |
| csv_output ? 0 : -4, |
| perf_evsel__cpus(counter)->map[cpu], csv_sep, |
| csv_output ? 0 : 18, |
| counter->supported ? CNTR_NOT_COUNTED : CNTR_NOT_SUPPORTED, |
| csv_sep); |
| |
| fprintf(output, "%-*s%s", |
| csv_output ? 0 : unit_width, |
| counter->unit, csv_sep); |
| |
| fprintf(output, "%*s", |
| csv_output ? 0 : -25, |
| perf_evsel__name(counter)); |
| |
| if (counter->cgrp) |
| fprintf(output, "%s%s", |
| csv_sep, counter->cgrp->name); |
| |
| print_running(run, ena); |
| fputc('\n', output); |
| continue; |
| } |
| |
| uval = val * counter->scale; |
| |
| if (nsec_counter(counter)) |
| nsec_printout(cpu, 0, counter, uval); |
| else |
| abs_printout(cpu, 0, counter, uval); |
| |
| if (!csv_output) |
| print_noise(counter, 1.0); |
| print_running(run, ena); |
| |
| fputc('\n', output); |
| } |
| } |
| |
| static void print_interval(char *prefix, struct timespec *ts) |
| { |
| static int num_print_interval; |
| |
| sprintf(prefix, "%6lu.%09lu%s", ts->tv_sec, ts->tv_nsec, csv_sep); |
| |
| if (num_print_interval == 0 && !csv_output) { |
| switch (aggr_mode) { |
| case AGGR_SOCKET: |
| fprintf(output, "# time socket cpus counts %*s events\n", unit_width, "unit"); |
| break; |
| case AGGR_CORE: |
| fprintf(output, "# time core cpus counts %*s events\n", unit_width, "unit"); |
| break; |
| case AGGR_NONE: |
| fprintf(output, "# time CPU counts %*s events\n", unit_width, "unit"); |
| break; |
| case AGGR_THREAD: |
| fprintf(output, "# time comm-pid counts %*s events\n", unit_width, "unit"); |
| break; |
| case AGGR_GLOBAL: |
| default: |
| fprintf(output, "# time counts %*s events\n", unit_width, "unit"); |
| } |
| } |
| |
| if (++num_print_interval == 25) |
| num_print_interval = 0; |
| } |
| |
| static void print_header(int argc, const char **argv) |
| { |
| int i; |
| |
| fflush(stdout); |
| |
| if (!csv_output) { |
| fprintf(output, "\n"); |
| fprintf(output, " Performance counter stats for "); |
| if (target.system_wide) |
| fprintf(output, "\'system wide"); |
| else if (target.cpu_list) |
| fprintf(output, "\'CPU(s) %s", target.cpu_list); |
| else if (!target__has_task(&target)) { |
| fprintf(output, "\'%s", argv[0]); |
| for (i = 1; i < argc; i++) |
| fprintf(output, " %s", argv[i]); |
| } else if (target.pid) |
| fprintf(output, "process id \'%s", target.pid); |
| else |
| fprintf(output, "thread id \'%s", target.tid); |
| |
| fprintf(output, "\'"); |
| if (run_count > 1) |
| fprintf(output, " (%d runs)", run_count); |
| fprintf(output, ":\n\n"); |
| } |
| } |
| |
| static void print_footer(void) |
| { |
| if (!null_run) |
| fprintf(output, "\n"); |
| fprintf(output, " %17.9f seconds time elapsed", |
| avg_stats(&walltime_nsecs_stats)/1e9); |
| if (run_count > 1) { |
| fprintf(output, " "); |
| print_noise_pct(stddev_stats(&walltime_nsecs_stats), |
| avg_stats(&walltime_nsecs_stats)); |
| } |
| fprintf(output, "\n\n"); |
| } |
| |
| static void print_counters(struct timespec *ts, int argc, const char **argv) |
| { |
| struct perf_evsel *counter; |
| char buf[64], *prefix = NULL; |
| |
| if (interval) |
| print_interval(prefix = buf, ts); |
| else |
| print_header(argc, argv); |
| |
| switch (aggr_mode) { |
| case AGGR_CORE: |
| case AGGR_SOCKET: |
| print_aggr(prefix); |
| break; |
| case AGGR_THREAD: |
| evlist__for_each(evsel_list, counter) |
| print_aggr_thread(counter, prefix); |
| break; |
| case AGGR_GLOBAL: |
| evlist__for_each(evsel_list, counter) |
| print_counter_aggr(counter, prefix); |
| break; |
| case AGGR_NONE: |
| evlist__for_each(evsel_list, counter) |
| print_counter(counter, prefix); |
| break; |
| default: |
| break; |
| } |
| |
| if (!interval && !csv_output) |
| print_footer(); |
| |
| fflush(output); |
| } |
| |
| static volatile int signr = -1; |
| |
| static void skip_signal(int signo) |
| { |
| if ((child_pid == -1) || interval) |
| done = 1; |
| |
| signr = signo; |
| /* |
| * render child_pid harmless |
| * won't send SIGTERM to a random |
| * process in case of race condition |
| * and fast PID recycling |
| */ |
| child_pid = -1; |
| } |
| |
| static void sig_atexit(void) |
| { |
| sigset_t set, oset; |
| |
| /* |
| * avoid race condition with SIGCHLD handler |
| * in skip_signal() which is modifying child_pid |
| * goal is to avoid send SIGTERM to a random |
| * process |
| */ |
| sigemptyset(&set); |
| sigaddset(&set, SIGCHLD); |
| sigprocmask(SIG_BLOCK, &set, &oset); |
| |
| if (child_pid != -1) |
| kill(child_pid, SIGTERM); |
| |
| sigprocmask(SIG_SETMASK, &oset, NULL); |
| |
| if (signr == -1) |
| return; |
| |
| signal(signr, SIG_DFL); |
| kill(getpid(), signr); |
| } |
| |
| static int stat__set_big_num(const struct option *opt __maybe_unused, |
| const char *s __maybe_unused, int unset) |
| { |
| big_num_opt = unset ? 0 : 1; |
| return 0; |
| } |
| |
| static int perf_stat_init_aggr_mode(void) |
| { |
| switch (aggr_mode) { |
| case AGGR_SOCKET: |
| if (cpu_map__build_socket_map(evsel_list->cpus, &aggr_map)) { |
| perror("cannot build socket map"); |
| return -1; |
| } |
| aggr_get_id = cpu_map__get_socket; |
| break; |
| case AGGR_CORE: |
| if (cpu_map__build_core_map(evsel_list->cpus, &aggr_map)) { |
| perror("cannot build core map"); |
| return -1; |
| } |
| aggr_get_id = cpu_map__get_core; |
| break; |
| case AGGR_NONE: |
| case AGGR_GLOBAL: |
| case AGGR_THREAD: |
| default: |
| break; |
| } |
| return 0; |
| } |
| |
| /* |
| * Add default attributes, if there were no attributes specified or |
| * if -d/--detailed, -d -d or -d -d -d is used: |
| */ |
| static int add_default_attributes(void) |
| { |
| struct perf_event_attr default_attrs[] = { |
| |
| { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_TASK_CLOCK }, |
| { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CONTEXT_SWITCHES }, |
| { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CPU_MIGRATIONS }, |
| { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_PAGE_FAULTS }, |
| |
| { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CPU_CYCLES }, |
| { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_STALLED_CYCLES_FRONTEND }, |
| { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_STALLED_CYCLES_BACKEND }, |
| { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_INSTRUCTIONS }, |
| { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_INSTRUCTIONS }, |
| { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_MISSES }, |
| |
| }; |
| |
| /* |
| * Detailed stats (-d), covering the L1 and last level data caches: |
| */ |
| struct perf_event_attr detailed_attrs[] = { |
| |
| { .type = PERF_TYPE_HW_CACHE, |
| .config = |
| PERF_COUNT_HW_CACHE_L1D << 0 | |
| (PERF_COUNT_HW_CACHE_OP_READ << 8) | |
| (PERF_COUNT_HW_CACHE_RESULT_ACCESS << 16) }, |
| |
| { .type = PERF_TYPE_HW_CACHE, |
| .config = |
| PERF_COUNT_HW_CACHE_L1D << 0 | |
| (PERF_COUNT_HW_CACHE_OP_READ << 8) | |
| (PERF_COUNT_HW_CACHE_RESULT_MISS << 16) }, |
| |
| { .type = PERF_TYPE_HW_CACHE, |
| .config = |
| PERF_COUNT_HW_CACHE_LL << 0 | |
| (PERF_COUNT_HW_CACHE_OP_READ << 8) | |
| (PERF_COUNT_HW_CACHE_RESULT_ACCESS << 16) }, |
| |
| { .type = PERF_TYPE_HW_CACHE, |
| .config = |
| PERF_COUNT_HW_CACHE_LL << 0 | |
| (PERF_COUNT_HW_CACHE_OP_READ << 8) | |
| (PERF_COUNT_HW_CACHE_RESULT_MISS << 16) }, |
| }; |
| |
| /* |
| * Very detailed stats (-d -d), covering the instruction cache and the TLB caches: |
| */ |
| struct perf_event_attr very_detailed_attrs[] = { |
| |
| { .type = PERF_TYPE_HW_CACHE, |
| .config = |
| PERF_COUNT_HW_CACHE_L1I << 0 | |
| (PERF_COUNT_HW_CACHE_OP_READ << 8) | |
| (PERF_COUNT_HW_CACHE_RESULT_ACCESS << 16) }, |
| |
| { .type = PERF_TYPE_HW_CACHE, |
| .config = |
| PERF_COUNT_HW_CACHE_L1I << 0 | |
| (PERF_COUNT_HW_CACHE_OP_READ << 8) | |
| (PERF_COUNT_HW_CACHE_RESULT_MISS << 16) }, |
| |
| { .type = PERF_TYPE_HW_CACHE, |
| .config = |
| PERF_COUNT_HW_CACHE_DTLB << 0 | |
| (PERF_COUNT_HW_CACHE_OP_READ << 8) | |
| (PERF_COUNT_HW_CACHE_RESULT_ACCESS << 16) }, |
| |
| { .type = PERF_TYPE_HW_CACHE, |
| .config = |
| PERF_COUNT_HW_CACHE_DTLB << 0 | |
| (PERF_COUNT_HW_CACHE_OP_READ << 8) | |
| (PERF_COUNT_HW_CACHE_RESULT_MISS << 16) }, |
| |
| { .type = PERF_TYPE_HW_CACHE, |
| .config = |
| PERF_COUNT_HW_CACHE_ITLB << 0 | |
| (PERF_COUNT_HW_CACHE_OP_READ << 8) | |
| (PERF_COUNT_HW_CACHE_RESULT_ACCESS << 16) }, |
| |
| { .type = PERF_TYPE_HW_CACHE, |
| .config = |
| PERF_COUNT_HW_CACHE_ITLB << 0 | |
| (PERF_COUNT_HW_CACHE_OP_READ << 8) | |
| (PERF_COUNT_HW_CACHE_RESULT_MISS << 16) }, |
| |
| }; |
| |
| /* |
| * Very, very detailed stats (-d -d -d), adding prefetch events: |
| */ |
| struct perf_event_attr very_very_detailed_attrs[] = { |
| |
| { .type = PERF_TYPE_HW_CACHE, |
| .config = |
| PERF_COUNT_HW_CACHE_L1D << 0 | |
| (PERF_COUNT_HW_CACHE_OP_PREFETCH << 8) | |
| (PERF_COUNT_HW_CACHE_RESULT_ACCESS << 16) }, |
| |
| { .type = PERF_TYPE_HW_CACHE, |
| .config = |
| PERF_COUNT_HW_CACHE_L1D << 0 | |
| (PERF_COUNT_HW_CACHE_OP_PREFETCH << 8) | |
| (PERF_COUNT_HW_CACHE_RESULT_MISS << 16) }, |
| }; |
| |
| /* Set attrs if no event is selected and !null_run: */ |
| if (null_run) |
| return 0; |
| |
| if (transaction_run) { |
| int err; |
| if (pmu_have_event("cpu", "cycles-ct") && |
| pmu_have_event("cpu", "el-start")) |
| err = parse_events(evsel_list, transaction_attrs, NULL); |
| else |
| err = parse_events(evsel_list, transaction_limited_attrs, NULL); |
| if (err) { |
| fprintf(stderr, "Cannot set up transaction events\n"); |
| return -1; |
| } |
| return 0; |
| } |
| |
| if (!evsel_list->nr_entries) { |
| if (perf_evlist__add_default_attrs(evsel_list, default_attrs) < 0) |
| return -1; |
| } |
| |
| /* Detailed events get appended to the event list: */ |
| |
| if (detailed_run < 1) |
| return 0; |
| |
| /* Append detailed run extra attributes: */ |
| if (perf_evlist__add_default_attrs(evsel_list, detailed_attrs) < 0) |
| return -1; |
| |
| if (detailed_run < 2) |
| return 0; |
| |
| /* Append very detailed run extra attributes: */ |
| if (perf_evlist__add_default_attrs(evsel_list, very_detailed_attrs) < 0) |
| return -1; |
| |
| if (detailed_run < 3) |
| return 0; |
| |
| /* Append very, very detailed run extra attributes: */ |
| return perf_evlist__add_default_attrs(evsel_list, very_very_detailed_attrs); |
| } |
| |
| int cmd_stat(int argc, const char **argv, const char *prefix __maybe_unused) |
| { |
| bool append_file = false; |
| int output_fd = 0; |
| const char *output_name = NULL; |
| const struct option options[] = { |
| OPT_BOOLEAN('T', "transaction", &transaction_run, |
| "hardware transaction statistics"), |
| OPT_CALLBACK('e', "event", &evsel_list, "event", |
| "event selector. use 'perf list' to list available events", |
| parse_events_option), |
| OPT_CALLBACK(0, "filter", &evsel_list, "filter", |
| "event filter", parse_filter), |
| OPT_BOOLEAN('i', "no-inherit", &no_inherit, |
| "child tasks do not inherit counters"), |
| OPT_STRING('p', "pid", &target.pid, "pid", |
| "stat events on existing process id"), |
| OPT_STRING('t', "tid", &target.tid, "tid", |
| "stat events on existing thread id"), |
| OPT_BOOLEAN('a', "all-cpus", &target.system_wide, |
| "system-wide collection from all CPUs"), |
| OPT_BOOLEAN('g', "group", &group, |
| "put the counters into a counter group"), |
| OPT_BOOLEAN('c', "scale", &scale, "scale/normalize counters"), |
| OPT_INCR('v', "verbose", &verbose, |
| "be more verbose (show counter open errors, etc)"), |
| OPT_INTEGER('r', "repeat", &run_count, |
| "repeat command and print average + stddev (max: 100, forever: 0)"), |
| OPT_BOOLEAN('n', "null", &null_run, |
| "null run - dont start any counters"), |
| OPT_INCR('d', "detailed", &detailed_run, |
| "detailed run - start a lot of events"), |
| OPT_BOOLEAN('S', "sync", &sync_run, |
| "call sync() before starting a run"), |
| OPT_CALLBACK_NOOPT('B', "big-num", NULL, NULL, |
| "print large numbers with thousands\' separators", |
| stat__set_big_num), |
| OPT_STRING('C', "cpu", &target.cpu_list, "cpu", |
| "list of cpus to monitor in system-wide"), |
| OPT_SET_UINT('A', "no-aggr", &aggr_mode, |
| "disable CPU count aggregation", AGGR_NONE), |
| OPT_STRING('x', "field-separator", &csv_sep, "separator", |
| "print counts with custom separator"), |
| OPT_CALLBACK('G', "cgroup", &evsel_list, "name", |
| "monitor event in cgroup name only", parse_cgroups), |
| OPT_STRING('o', "output", &output_name, "file", "output file name"), |
| OPT_BOOLEAN(0, "append", &append_file, "append to the output file"), |
| OPT_INTEGER(0, "log-fd", &output_fd, |
| "log output to fd, instead of stderr"), |
| OPT_STRING(0, "pre", &pre_cmd, "command", |
| "command to run prior to the measured command"), |
| OPT_STRING(0, "post", &post_cmd, "command", |
| "command to run after to the measured command"), |
| OPT_UINTEGER('I', "interval-print", &interval, |
| "print counts at regular interval in ms (>= 100)"), |
| OPT_SET_UINT(0, "per-socket", &aggr_mode, |
| "aggregate counts per processor socket", AGGR_SOCKET), |
| OPT_SET_UINT(0, "per-core", &aggr_mode, |
| "aggregate counts per physical processor core", AGGR_CORE), |
| OPT_SET_UINT(0, "per-thread", &aggr_mode, |
| "aggregate counts per thread", AGGR_THREAD), |
| OPT_UINTEGER('D', "delay", &initial_delay, |
| "ms to wait before starting measurement after program start"), |
| OPT_END() |
| }; |
| const char * const stat_usage[] = { |
| "perf stat [<options>] [<command>]", |
| NULL |
| }; |
| int status = -EINVAL, run_idx; |
| const char *mode; |
| |
| setlocale(LC_ALL, ""); |
| |
| evsel_list = perf_evlist__new(); |
| if (evsel_list == NULL) |
| return -ENOMEM; |
| |
| argc = parse_options(argc, argv, options, stat_usage, |
| PARSE_OPT_STOP_AT_NON_OPTION); |
| |
| output = stderr; |
| if (output_name && strcmp(output_name, "-")) |
| output = NULL; |
| |
| if (output_name && output_fd) { |
| fprintf(stderr, "cannot use both --output and --log-fd\n"); |
| parse_options_usage(stat_usage, options, "o", 1); |
| parse_options_usage(NULL, options, "log-fd", 0); |
| goto out; |
| } |
| |
| if (output_fd < 0) { |
| fprintf(stderr, "argument to --log-fd must be a > 0\n"); |
| parse_options_usage(stat_usage, options, "log-fd", 0); |
| goto out; |
| } |
| |
| if (!output) { |
| struct timespec tm; |
| mode = append_file ? "a" : "w"; |
| |
| output = fopen(output_name, mode); |
| if (!output) { |
| perror("failed to create output file"); |
| return -1; |
| } |
| clock_gettime(CLOCK_REALTIME, &tm); |
| fprintf(output, "# started on %s\n", ctime(&tm.tv_sec)); |
| } else if (output_fd > 0) { |
| mode = append_file ? "a" : "w"; |
| output = fdopen(output_fd, mode); |
| if (!output) { |
| perror("Failed opening logfd"); |
| return -errno; |
| } |
| } |
| |
| if (csv_sep) { |
| csv_output = true; |
| if (!strcmp(csv_sep, "\\t")) |
| csv_sep = "\t"; |
| } else |
| csv_sep = DEFAULT_SEPARATOR; |
| |
| /* |
| * let the spreadsheet do the pretty-printing |
| */ |
| if (csv_output) { |
| /* User explicitly passed -B? */ |
| if (big_num_opt == 1) { |
| fprintf(stderr, "-B option not supported with -x\n"); |
| parse_options_usage(stat_usage, options, "B", 1); |
| parse_options_usage(NULL, options, "x", 1); |
| goto out; |
| } else /* Nope, so disable big number formatting */ |
| big_num = false; |
| } else if (big_num_opt == 0) /* User passed --no-big-num */ |
| big_num = false; |
| |
| if (!argc && target__none(&target)) |
| usage_with_options(stat_usage, options); |
| |
| if (run_count < 0) { |
| pr_err("Run count must be a positive number\n"); |
| parse_options_usage(stat_usage, options, "r", 1); |
| goto out; |
| } else if (run_count == 0) { |
| forever = true; |
| run_count = 1; |
| } |
| |
| if ((aggr_mode == AGGR_THREAD) && !target__has_task(&target)) { |
| fprintf(stderr, "The --per-thread option is only available " |
| "when monitoring via -p -t options.\n"); |
| parse_options_usage(NULL, options, "p", 1); |
| parse_options_usage(NULL, options, "t", 1); |
| goto out; |
| } |
| |
| /* |
| * no_aggr, cgroup are for system-wide only |
| * --per-thread is aggregated per thread, we dont mix it with cpu mode |
| */ |
| if (((aggr_mode != AGGR_GLOBAL && aggr_mode != AGGR_THREAD) || nr_cgroups) && |
| !target__has_cpu(&target)) { |
| fprintf(stderr, "both cgroup and no-aggregation " |
| "modes only available in system-wide mode\n"); |
| |
| parse_options_usage(stat_usage, options, "G", 1); |
| parse_options_usage(NULL, options, "A", 1); |
| parse_options_usage(NULL, options, "a", 1); |
| goto out; |
| } |
| |
| if (add_default_attributes()) |
| goto out; |
| |
| target__validate(&target); |
| |
| if (perf_evlist__create_maps(evsel_list, &target) < 0) { |
| if (target__has_task(&target)) { |
| pr_err("Problems finding threads of monitor\n"); |
| parse_options_usage(stat_usage, options, "p", 1); |
| parse_options_usage(NULL, options, "t", 1); |
| } else if (target__has_cpu(&target)) { |
| perror("failed to parse CPUs map"); |
| parse_options_usage(stat_usage, options, "C", 1); |
| parse_options_usage(NULL, options, "a", 1); |
| } |
| goto out; |
| } |
| |
| /* |
| * Initialize thread_map with comm names, |
| * so we could print it out on output. |
| */ |
| if (aggr_mode == AGGR_THREAD) |
| thread_map__read_comms(evsel_list->threads); |
| |
| if (interval && interval < 100) { |
| pr_err("print interval must be >= 100ms\n"); |
| parse_options_usage(stat_usage, options, "I", 1); |
| goto out; |
| } |
| |
| if (perf_evlist__alloc_stats(evsel_list, interval)) |
| goto out; |
| |
| if (perf_stat_init_aggr_mode()) |
| goto out; |
| |
| /* |
| * We dont want to block the signals - that would cause |
| * child tasks to inherit that and Ctrl-C would not work. |
| * What we want is for Ctrl-C to work in the exec()-ed |
| * task, but being ignored by perf stat itself: |
| */ |
| atexit(sig_atexit); |
| if (!forever) |
| signal(SIGINT, skip_signal); |
| signal(SIGCHLD, skip_signal); |
| signal(SIGALRM, skip_signal); |
| signal(SIGABRT, skip_signal); |
| |
| status = 0; |
| for (run_idx = 0; forever || run_idx < run_count; run_idx++) { |
| if (run_count != 1 && verbose) |
| fprintf(output, "[ perf stat: executing run #%d ... ]\n", |
| run_idx + 1); |
| |
| status = run_perf_stat(argc, argv); |
| if (forever && status != -1) { |
| print_counters(NULL, argc, argv); |
| perf_stat__reset_stats(); |
| } |
| } |
| |
| if (!forever && status != -1 && !interval) |
| print_counters(NULL, argc, argv); |
| |
| perf_evlist__free_stats(evsel_list); |
| out: |
| perf_evlist__delete(evsel_list); |
| return status; |
| } |