Merge tag 'exynos-drm-fixes-for-v4.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
Summary:
- fix probing fail issue of dsi driver without bridge device.
- fix disable sequence of hdmi driver.
- trivial cleanups.
* tag 'exynos-drm-fixes-for-v4.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm: exynos: mark pm functions as __maybe_unused
drm/exynos: select CEC_CORE if CEC_NOTIFIER
drm/exynos/hdmi: fix disable sequence
drm/exynos: mic: add a bridge at probe
drm/exynos/dsi: Remove error handling for bridge_node DT parsing
drm/exynos: dsi: do not try to find bridge
drm: exynos: hdmi: make of_device_ids const.
drm: exynos: constify mixer_match_types and *_mxr_drv_data.
exynos_drm: Clean up duplicated assignment in exynos_drm_driver
diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
index 213fb83..08af8d6 100644
--- a/drivers/gpu/drm/drm_dp_helper.c
+++ b/drivers/gpu/drm/drm_dp_helper.c
@@ -544,7 +544,7 @@
DP_DETAILED_CAP_INFO_AVAILABLE;
int clk;
int bpc;
- char id[6];
+ char id[7];
int len;
uint8_t rev[2];
int type = port_cap[0] & DP_DS_PORT_TYPE_MASK;
@@ -583,6 +583,7 @@
seq_puts(m, "\t\tType: N/A\n");
}
+ memset(id, 0, sizeof(id));
drm_dp_downstream_id(aux, id);
seq_printf(m, "\t\tID: %s\n", id);
@@ -591,7 +592,7 @@
seq_printf(m, "\t\tHW: %d.%d\n",
(rev[0] & 0xf0) >> 4, rev[0] & 0xf);
- len = drm_dp_dpcd_read(aux, DP_BRANCH_SW_REV, &rev, 2);
+ len = drm_dp_dpcd_read(aux, DP_BRANCH_SW_REV, rev, 2);
if (len > 0)
seq_printf(m, "\t\tSW: %d.%d\n", rev[0], rev[1]);
diff --git a/drivers/gpu/drm/i915/gvt/display.c b/drivers/gpu/drm/i915/gvt/display.c
index 2deb05f..7cb0818 100644
--- a/drivers/gpu/drm/i915/gvt/display.c
+++ b/drivers/gpu/drm/i915/gvt/display.c
@@ -323,27 +323,27 @@
{
struct intel_gvt_irq *irq = &gvt->irq;
struct intel_vgpu *vgpu;
- bool have_enabled_pipe = false;
int pipe, id;
if (WARN_ON(!mutex_is_locked(&gvt->lock)))
return;
- hrtimer_cancel(&irq->vblank_timer.timer);
-
for_each_active_vgpu(gvt, vgpu, id) {
for (pipe = 0; pipe < I915_MAX_PIPES; pipe++) {
- have_enabled_pipe =
- pipe_is_enabled(vgpu, pipe);
- if (have_enabled_pipe)
- break;
+ if (pipe_is_enabled(vgpu, pipe))
+ goto out;
}
}
- if (have_enabled_pipe)
- hrtimer_start(&irq->vblank_timer.timer,
- ktime_add_ns(ktime_get(), irq->vblank_timer.period),
- HRTIMER_MODE_ABS);
+ /* all the pipes are disabled */
+ hrtimer_cancel(&irq->vblank_timer.timer);
+ return;
+
+out:
+ hrtimer_start(&irq->vblank_timer.timer,
+ ktime_add_ns(ktime_get(), irq->vblank_timer.period),
+ HRTIMER_MODE_ABS);
+
}
static void emulate_vblank_on_pipe(struct intel_vgpu *vgpu, int pipe)
diff --git a/drivers/gpu/drm/i915/i915_gem_clflush.c b/drivers/gpu/drm/i915/i915_gem_clflush.c
index 152f16c..348b29a 100644
--- a/drivers/gpu/drm/i915/i915_gem_clflush.c
+++ b/drivers/gpu/drm/i915/i915_gem_clflush.c
@@ -114,7 +114,7 @@
return NOTIFY_DONE;
}
-void i915_gem_clflush_object(struct drm_i915_gem_object *obj,
+bool i915_gem_clflush_object(struct drm_i915_gem_object *obj,
unsigned int flags)
{
struct clflush *clflush;
@@ -128,7 +128,7 @@
*/
if (!i915_gem_object_has_struct_page(obj)) {
obj->cache_dirty = false;
- return;
+ return false;
}
/* If the GPU is snooping the contents of the CPU cache,
@@ -140,7 +140,7 @@
* tracking.
*/
if (!(flags & I915_CLFLUSH_FORCE) && obj->cache_coherent)
- return;
+ return false;
trace_i915_gem_object_clflush(obj);
@@ -179,4 +179,5 @@
}
obj->cache_dirty = false;
+ return true;
}
diff --git a/drivers/gpu/drm/i915/i915_gem_clflush.h b/drivers/gpu/drm/i915/i915_gem_clflush.h
index 2455a78..f390247 100644
--- a/drivers/gpu/drm/i915/i915_gem_clflush.h
+++ b/drivers/gpu/drm/i915/i915_gem_clflush.h
@@ -28,7 +28,7 @@
struct drm_i915_private;
struct drm_i915_gem_object;
-void i915_gem_clflush_object(struct drm_i915_gem_object *obj,
+bool i915_gem_clflush_object(struct drm_i915_gem_object *obj,
unsigned int flags);
#define I915_CLFLUSH_FORCE BIT(0)
#define I915_CLFLUSH_SYNC BIT(1)
diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
index 054b2e5..e9503f6 100644
--- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c
+++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
@@ -560,9 +560,6 @@
eb->args->flags |= __EXEC_HAS_RELOC;
}
- entry->flags |= __EXEC_OBJECT_HAS_PIN;
- GEM_BUG_ON(eb_vma_misplaced(entry, vma));
-
if (unlikely(entry->flags & EXEC_OBJECT_NEEDS_FENCE)) {
err = i915_vma_get_fence(vma);
if (unlikely(err)) {
@@ -574,6 +571,9 @@
entry->flags |= __EXEC_OBJECT_HAS_FENCE;
}
+ entry->flags |= __EXEC_OBJECT_HAS_PIN;
+ GEM_BUG_ON(eb_vma_misplaced(entry, vma));
+
return 0;
}
@@ -1458,7 +1458,7 @@
* to read. However, if the array is not writable the user loses
* the updated relocation values.
*/
- if (unlikely(!access_ok(VERIFY_READ, urelocs, remain*sizeof(urelocs))))
+ if (unlikely(!access_ok(VERIFY_READ, urelocs, remain*sizeof(*urelocs))))
return -EFAULT;
do {
@@ -1775,7 +1775,7 @@
}
}
- return err ?: have_copy;
+ return err;
}
static int eb_relocate(struct i915_execbuffer *eb)
@@ -1825,7 +1825,7 @@
int err;
for (i = 0; i < count; i++) {
- const struct drm_i915_gem_exec_object2 *entry = &eb->exec[i];
+ struct drm_i915_gem_exec_object2 *entry = &eb->exec[i];
struct i915_vma *vma = exec_to_vma(entry);
struct drm_i915_gem_object *obj = vma->obj;
@@ -1841,12 +1841,14 @@
eb->request->capture_list = capture;
}
+ if (unlikely(obj->cache_dirty && !obj->cache_coherent)) {
+ if (i915_gem_clflush_object(obj, 0))
+ entry->flags &= ~EXEC_OBJECT_ASYNC;
+ }
+
if (entry->flags & EXEC_OBJECT_ASYNC)
goto skip_flushes;
- if (unlikely(obj->cache_dirty && !obj->cache_coherent))
- i915_gem_clflush_object(obj, 0);
-
err = i915_gem_request_await_object
(eb->request, obj, entry->flags & EXEC_OBJECT_WRITE);
if (err)
@@ -2209,7 +2211,7 @@
goto err_unlock;
err = eb_relocate(&eb);
- if (err)
+ if (err) {
/*
* If the user expects the execobject.offset and
* reloc.presumed_offset to be an exact match,
@@ -2218,8 +2220,8 @@
* relocation.
*/
args->flags &= ~__EXEC_HAS_RELOC;
- if (err < 0)
goto err_vma;
+ }
if (unlikely(eb.batch->exec_entry->flags & EXEC_OBJECT_WRITE)) {
DRM_DEBUG("Attempting to use self-modifying batch buffer\n");
diff --git a/drivers/gpu/drm/i915/i915_vma.h b/drivers/gpu/drm/i915/i915_vma.h
index 4a673fc..20cf272 100644
--- a/drivers/gpu/drm/i915/i915_vma.h
+++ b/drivers/gpu/drm/i915/i915_vma.h
@@ -284,12 +284,12 @@
static inline void __i915_vma_unpin(struct i915_vma *vma)
{
- GEM_BUG_ON(!i915_vma_is_pinned(vma));
vma->flags--;
}
static inline void i915_vma_unpin(struct i915_vma *vma)
{
+ GEM_BUG_ON(!i915_vma_is_pinned(vma));
GEM_BUG_ON(!drm_mm_node_allocated(&vma->node));
__i915_vma_unpin(vma);
}
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 80e96f1..9edeaae 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -1896,8 +1896,8 @@
val = I915_READ(CNL_PORT_TX_DW4_LN(port, ln));
val &= ~LOADGEN_SELECT;
- if (((rate < 600000) && (width == 4) && (ln >= 1)) ||
- ((rate < 600000) && (width < 4) && ((ln == 1) || (ln == 2)))) {
+ if ((rate <= 600000 && width == 4 && ln >= 1) ||
+ (rate <= 600000 && width < 4 && (ln == 1 || ln == 2))) {
val |= LOADGEN_SELECT;
}
I915_WRITE(CNL_PORT_TX_DW4_LN(port, ln), val);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index dec9e58..9471c88d 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3427,26 +3427,6 @@
intel_finish_page_flip_cs(dev_priv, crtc->pipe);
}
-static void intel_update_primary_planes(struct drm_device *dev)
-{
- struct drm_crtc *crtc;
-
- for_each_crtc(dev, crtc) {
- struct intel_plane *plane = to_intel_plane(crtc->primary);
- struct intel_plane_state *plane_state =
- to_intel_plane_state(plane->base.state);
-
- if (plane_state->base.visible) {
- trace_intel_update_plane(&plane->base,
- to_intel_crtc(crtc));
-
- plane->update_plane(plane,
- to_intel_crtc_state(crtc->state),
- plane_state);
- }
- }
-}
-
static int
__intel_display_resume(struct drm_device *dev,
struct drm_atomic_state *state,
@@ -3499,6 +3479,12 @@
struct drm_atomic_state *state;
int ret;
+
+ /* reset doesn't touch the display */
+ if (!i915.force_reset_modeset_test &&
+ !gpu_reset_clobbers_display(dev_priv))
+ return;
+
/*
* Need mode_config.mutex so that we don't
* trample ongoing ->detect() and whatnot.
@@ -3512,12 +3498,6 @@
drm_modeset_backoff(ctx);
}
-
- /* reset doesn't touch the display, but flips might get nuked anyway, */
- if (!i915.force_reset_modeset_test &&
- !gpu_reset_clobbers_display(dev_priv))
- return;
-
/*
* Disabling the crtcs gracefully seems nicer. Also the
* g33 docs say we should at least disable all the planes.
@@ -3547,6 +3527,14 @@
struct drm_atomic_state *state = dev_priv->modeset_restore_state;
int ret;
+ /* reset doesn't touch the display */
+ if (!i915.force_reset_modeset_test &&
+ !gpu_reset_clobbers_display(dev_priv))
+ return;
+
+ if (!state)
+ goto unlock;
+
/*
* Flips in the rings will be nuked by the reset,
* so complete all pending flips so that user space
@@ -3558,22 +3546,10 @@
/* reset doesn't touch the display */
if (!gpu_reset_clobbers_display(dev_priv)) {
- if (!state) {
- /*
- * Flips in the rings have been nuked by the reset,
- * so update the base address of all primary
- * planes to the the last fb to make sure we're
- * showing the correct fb after a reset.
- *
- * FIXME: Atomic will make this obsolete since we won't schedule
- * CS-based flips (which might get lost in gpu resets) any more.
- */
- intel_update_primary_planes(dev);
- } else {
- ret = __intel_display_resume(dev, state, ctx);
+ /* for testing only restore the display */
+ ret = __intel_display_resume(dev, state, ctx);
if (ret)
DRM_ERROR("Restoring old state failed with %i\n", ret);
- }
} else {
/*
* The display has been reset as well,
@@ -3597,8 +3573,8 @@
intel_hpd_init(dev_priv);
}
- if (state)
- drm_atomic_state_put(state);
+ drm_atomic_state_put(state);
+unlock:
drm_modeset_drop_locks(ctx);
drm_modeset_acquire_fini(ctx);
mutex_unlock(&dev->mode_config.mutex);
@@ -9117,6 +9093,13 @@
u64 power_domain_mask;
bool active;
+ if (INTEL_GEN(dev_priv) >= 9) {
+ intel_crtc_init_scalers(crtc, pipe_config);
+
+ pipe_config->scaler_state.scaler_id = -1;
+ pipe_config->scaler_state.scaler_users &= ~(1 << SKL_CRTC_INDEX);
+ }
+
power_domain = POWER_DOMAIN_PIPE(crtc->pipe);
if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
return false;
@@ -9145,13 +9128,6 @@
pipe_config->gamma_mode =
I915_READ(GAMMA_MODE(crtc->pipe)) & GAMMA_MODE_MODE_MASK;
- if (INTEL_GEN(dev_priv) >= 9) {
- intel_crtc_init_scalers(crtc, pipe_config);
-
- pipe_config->scaler_state.scaler_id = -1;
- pipe_config->scaler_state.scaler_users &= ~(1 << SKL_CRTC_INDEX);
- }
-
power_domain = POWER_DOMAIN_PIPE_PANEL_FITTER(crtc->pipe);
if (intel_display_power_get_if_enabled(dev_priv, power_domain)) {
power_domain_mask |= BIT_ULL(power_domain);
@@ -9540,7 +9516,16 @@
* On some platforms writing CURCNTR first will also
* cause CURPOS to be armed by the CURBASE write.
* Without the CURCNTR write the CURPOS write would
- * arm itself.
+ * arm itself. Thus we always start the full update
+ * with a CURCNTR write.
+ *
+ * On other platforms CURPOS always requires the
+ * CURBASE write to arm the update. Additonally
+ * a write to any of the cursor register will cancel
+ * an already armed cursor update. Thus leaving out
+ * the CURBASE write after CURPOS could lead to a
+ * cursor that doesn't appear to move, or even change
+ * shape. Thus we always write CURBASE.
*
* CURCNTR and CUR_FBC_CTL are always
* armed by the CURBASE write only.
@@ -9559,6 +9544,7 @@
plane->cursor.cntl = cntl;
} else {
I915_WRITE_FW(CURPOS(pipe), pos);
+ I915_WRITE_FW(CURBASE(pipe), base);
}
POSTING_READ_FW(CURBASE(pipe));
diff --git a/drivers/gpu/drm/i915/intel_gvt.c b/drivers/gpu/drm/i915/intel_gvt.c
index 52d5b82..c17ed0e 100644
--- a/drivers/gpu/drm/i915/intel_gvt.c
+++ b/drivers/gpu/drm/i915/intel_gvt.c
@@ -45,7 +45,7 @@
return true;
if (IS_SKYLAKE(dev_priv))
return true;
- if (IS_KABYLAKE(dev_priv) && INTEL_DEVID(dev_priv) == 0x591D)
+ if (IS_KABYLAKE(dev_priv))
return true;
return false;
}
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 48ea0fc..40b224b 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -4463,8 +4463,8 @@
if ((cpp * cstate->base.adjusted_mode.crtc_htotal / 512 < 1) &&
(plane_bytes_per_line / 512 < 1))
selected_result = method2;
- else if ((ddb_allocation && ddb_allocation /
- fixed_16_16_to_u32_round_up(plane_blocks_per_line)) >= 1)
+ else if (ddb_allocation >=
+ fixed_16_16_to_u32_round_up(plane_blocks_per_line))
selected_result = min_fixed_16_16(method1, method2);
else if (latency >= linetime_us)
selected_result = min_fixed_16_16(method1, method2);
diff --git a/drivers/gpu/drm/i915/selftests/mock_gem_device.c b/drivers/gpu/drm/i915/selftests/mock_gem_device.c
index 627e2aa..8cdec45 100644
--- a/drivers/gpu/drm/i915/selftests/mock_gem_device.c
+++ b/drivers/gpu/drm/i915/selftests/mock_gem_device.c
@@ -206,7 +206,7 @@
mkwrite_device_info(i915)->ring_mask = BIT(0);
i915->engine[RCS] = mock_engine(i915, "mock");
if (!i915->engine[RCS])
- goto err_dependencies;
+ goto err_priorities;
i915->kernel_context = mock_context(i915, NULL);
if (!i915->kernel_context)
diff --git a/drivers/gpu/drm/rockchip/Kconfig b/drivers/gpu/drm/rockchip/Kconfig
index 50c41c0..dcc539b 100644
--- a/drivers/gpu/drm/rockchip/Kconfig
+++ b/drivers/gpu/drm/rockchip/Kconfig
@@ -5,6 +5,10 @@
select DRM_KMS_HELPER
select DRM_PANEL
select VIDEOMODE_HELPERS
+ select DRM_ANALOGIX_DP if ROCKCHIP_ANALOGIX_DP
+ select DRM_DW_HDMI if ROCKCHIP_DW_HDMI
+ select DRM_MIPI_DSI if ROCKCHIP_DW_MIPI_DSI
+ select SND_SOC_HDMI_CODEC if ROCKCHIP_CDN_DP && SND_SOC
help
Choose this option if you have a Rockchip soc chipset.
This driver provides kernel mode setting and buffer
@@ -12,10 +16,10 @@
2D or 3D acceleration; acceleration is performed by other
IP found on the SoC.
+if DRM_ROCKCHIP
+
config ROCKCHIP_ANALOGIX_DP
bool "Rockchip specific extensions for Analogix DP driver"
- depends on DRM_ROCKCHIP
- select DRM_ANALOGIX_DP
help
This selects support for Rockchip SoC specific extensions
for the Analogix Core DP driver. If you want to enable DP
@@ -23,9 +27,7 @@
config ROCKCHIP_CDN_DP
bool "Rockchip cdn DP"
- depends on DRM_ROCKCHIP
- depends on EXTCON
- select SND_SOC_HDMI_CODEC if SND_SOC
+ depends on EXTCON=y || (EXTCON=m && DRM_ROCKCHIP=m)
help
This selects support for Rockchip SoC specific extensions
for the cdn DP driver. If you want to enable Dp on
@@ -34,8 +36,6 @@
config ROCKCHIP_DW_HDMI
bool "Rockchip specific extensions for Synopsys DW HDMI"
- depends on DRM_ROCKCHIP
- select DRM_DW_HDMI
help
This selects support for Rockchip SoC specific extensions
for the Synopsys DesignWare HDMI driver. If you want to
@@ -44,8 +44,6 @@
config ROCKCHIP_DW_MIPI_DSI
bool "Rockchip specific extensions for Synopsys DW MIPI DSI"
- depends on DRM_ROCKCHIP
- select DRM_MIPI_DSI
help
This selects support for Rockchip SoC specific extensions
for the Synopsys DesignWare HDMI driver. If you want to
@@ -54,8 +52,9 @@
config ROCKCHIP_INNO_HDMI
bool "Rockchip specific extensions for Innosilicon HDMI"
- depends on DRM_ROCKCHIP
help
This selects support for Rockchip SoC specific extensions
for the Innosilicon HDMI driver. If you want to enable
HDMI on RK3036 based SoC, you should select this option.
+
+endif
diff --git a/drivers/gpu/host1x/dev.c b/drivers/gpu/host1x/dev.c
index 2c58a39..7782725 100644
--- a/drivers/gpu/host1x/dev.c
+++ b/drivers/gpu/host1x/dev.c
@@ -186,8 +186,13 @@
return -ENOMEM;
err = iommu_attach_device(host->domain, &pdev->dev);
- if (err)
+ if (err == -ENODEV) {
+ iommu_domain_free(host->domain);
+ host->domain = NULL;
+ goto skip_iommu;
+ } else if (err) {
goto fail_free_domain;
+ }
geometry = &host->domain->geometry;
@@ -198,6 +203,7 @@
host->iova_end = geometry->aperture_end;
}
+skip_iommu:
err = host1x_channel_list_init(&host->channel_list,
host->info->nb_channels);
if (err) {