media: staging: atomisp: Remove dead code for MID (#4)
Since we switched to upstream IOSF MBI API the custom code
become not in use anymore.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
diff --git a/drivers/staging/media/atomisp/include/asm/intel_mid_pcihelpers.h b/drivers/staging/media/atomisp/include/asm/intel_mid_pcihelpers.h
deleted file mode 100644
index bf39f42..0000000
--- a/drivers/staging/media/atomisp/include/asm/intel_mid_pcihelpers.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Access to message bus through three registers
- * in CUNIT(0:0:0) PCI configuration space.
- * MSGBUS_CTRL_REG(0xD0):
- * 31:24 = message bus opcode
- * 23:16 = message bus port
- * 15:8 = message bus address, low 8 bits.
- * 7:4 = message bus byte enables
- * MSGBUS_CTRL_EXT_REG(0xD8):
- * 31:8 = message bus address, high 24 bits.
- * MSGBUS_DATA_REG(0xD4):
- * hold the data for write or read
- */
-#define PCI_ROOT_MSGBUS_CTRL_REG 0xD0
-#define PCI_ROOT_MSGBUS_DATA_REG 0xD4
-#define PCI_ROOT_MSGBUS_CTRL_EXT_REG 0xD8
-#define PCI_ROOT_MSGBUS_READ 0x10
-#define PCI_ROOT_MSGBUS_WRITE 0x11
-#define PCI_ROOT_MSGBUS_DWORD_ENABLE 0xf0
-
-u32 intel_mid_msgbus_read32(u8 port, u32 addr);
-void intel_mid_msgbus_write32(u8 port, u32 addr, u32 data);
diff --git a/drivers/staging/media/atomisp/pci/atomisp2/atomisp_internal.h b/drivers/staging/media/atomisp/pci/atomisp2/atomisp_internal.h
index 7542a72f..1fe1711 100644
--- a/drivers/staging/media/atomisp/pci/atomisp2/atomisp_internal.h
+++ b/drivers/staging/media/atomisp/pci/atomisp2/atomisp_internal.h
@@ -30,7 +30,6 @@
#include <linux/idr.h>
#include <asm/intel-mid.h>
-#include "../../include/asm/intel_mid_pcihelpers.h"
#include <media/media-device.h>
#include <media/v4l2-subdev.h>
diff --git a/drivers/staging/media/atomisp/platform/intel-mid/Makefile b/drivers/staging/media/atomisp/platform/intel-mid/Makefile
index 4621261..c53db13 100644
--- a/drivers/staging/media/atomisp/platform/intel-mid/Makefile
+++ b/drivers/staging/media/atomisp/platform/intel-mid/Makefile
@@ -1,5 +1,4 @@
#
# Makefile for intel-mid devices.
#
-obj-$(CONFIG_INTEL_ATOMISP) += intel_mid_pcihelpers.o
obj-$(CONFIG_INTEL_ATOMISP) += atomisp_gmin_platform.o
diff --git a/drivers/staging/media/atomisp/platform/intel-mid/intel_mid_pcihelpers.c b/drivers/staging/media/atomisp/platform/intel-mid/intel_mid_pcihelpers.c
deleted file mode 100644
index 4ed3268..0000000
--- a/drivers/staging/media/atomisp/platform/intel-mid/intel_mid_pcihelpers.c
+++ /dev/null
@@ -1,98 +0,0 @@
-#include <linux/export.h>
-#include <linux/pci.h>
-#include <linux/pm_qos.h>
-#include <linux/delay.h>
-
-/* G-Min addition: "platform_is()" lives in intel_mid_pm.h in the MCG
- * tree, but it's just platform ID info and we don't want to pull in
- * the whole SFI-based PM architecture.
- */
-#define INTEL_ATOM_MRST 0x26
-#define INTEL_ATOM_MFLD 0x27
-#define INTEL_ATOM_CLV 0x35
-#define INTEL_ATOM_MRFLD 0x4a
-#define INTEL_ATOM_BYT 0x37
-#define INTEL_ATOM_MOORFLD 0x5a
-#define INTEL_ATOM_CHT 0x4c
-static inline int platform_is(u8 model)
-{
- return (boot_cpu_data.x86_model == model);
-}
-
-#include "../../include/asm/intel_mid_pcihelpers.h"
-
-/* Unified message bus read/write operation */
-static DEFINE_SPINLOCK(msgbus_lock);
-
-static struct pci_dev *pci_root;
-static struct pm_qos_request pm_qos;
-
-#define DW_I2C_NEED_QOS (platform_is(INTEL_ATOM_BYT))
-
-static int intel_mid_msgbus_init(void)
-{
- pci_root = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
- if (!pci_root) {
- pr_err("%s: Error: msgbus PCI handle NULL\n", __func__);
- return -ENODEV;
- }
-
- if (DW_I2C_NEED_QOS) {
- pm_qos_add_request(&pm_qos,
- PM_QOS_CPU_DMA_LATENCY,
- PM_QOS_DEFAULT_VALUE);
- }
- return 0;
-}
-fs_initcall(intel_mid_msgbus_init);
-
-u32 intel_mid_msgbus_read32(u8 port, u32 addr)
-{
- unsigned long irq_flags;
- u32 data;
- u32 cmd;
- u32 cmdext;
-
- cmd = (PCI_ROOT_MSGBUS_READ << 24) | (port << 16) |
- ((addr & 0xff) << 8) | PCI_ROOT_MSGBUS_DWORD_ENABLE;
- cmdext = addr & 0xffffff00;
-
- spin_lock_irqsave(&msgbus_lock, irq_flags);
-
- if (cmdext) {
- /* This resets to 0 automatically, no need to write 0 */
- pci_write_config_dword(pci_root, PCI_ROOT_MSGBUS_CTRL_EXT_REG,
- cmdext);
- }
-
- pci_write_config_dword(pci_root, PCI_ROOT_MSGBUS_CTRL_REG, cmd);
- pci_read_config_dword(pci_root, PCI_ROOT_MSGBUS_DATA_REG, &data);
- spin_unlock_irqrestore(&msgbus_lock, irq_flags);
-
- return data;
-}
-EXPORT_SYMBOL(intel_mid_msgbus_read32);
-
-void intel_mid_msgbus_write32(u8 port, u32 addr, u32 data)
-{
- unsigned long irq_flags;
- u32 cmd;
- u32 cmdext;
-
- cmd = (PCI_ROOT_MSGBUS_WRITE << 24) | (port << 16) |
- ((addr & 0xFF) << 8) | PCI_ROOT_MSGBUS_DWORD_ENABLE;
- cmdext = addr & 0xffffff00;
-
- spin_lock_irqsave(&msgbus_lock, irq_flags);
- pci_write_config_dword(pci_root, PCI_ROOT_MSGBUS_DATA_REG, data);
-
- if (cmdext) {
- /* This resets to 0 automatically, no need to write 0 */
- pci_write_config_dword(pci_root, PCI_ROOT_MSGBUS_CTRL_EXT_REG,
- cmdext);
- }
-
- pci_write_config_dword(pci_root, PCI_ROOT_MSGBUS_CTRL_REG, cmd);
- spin_unlock_irqrestore(&msgbus_lock, irq_flags);
-}
-EXPORT_SYMBOL(intel_mid_msgbus_write32);