Merge commit 'v2.6.37' into next
diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index 15f1f1d..6f432e6 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -17,7 +17,7 @@
# The various CONFIG_XILINX cpu features options are integers 0/1/2...
# rather than bools y/n
-# Work out HW multipler support. This is icky.
+# Work out HW multipler support. This is tricky.
# 1. Spartan2 has no HW multiplers.
# 2. MicroBlaze v3.x always uses them, except in Spartan 2
# 3. All other FPGa/CPU ver combos, we can trust the CONFIG_ settings
diff --git a/arch/microblaze/include/asm/pvr.h b/arch/microblaze/include/asm/pvr.h
index 37db96a..a10bec6 100644
--- a/arch/microblaze/include/asm/pvr.h
+++ b/arch/microblaze/include/asm/pvr.h
@@ -1,9 +1,9 @@
/*
* Support for the MicroBlaze PVR (Processor Version Register)
*
- * Copyright (C) 2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2009 - 2011 Michal Simek <monstr@monstr.eu>
* Copyright (C) 2007 John Williams <john.williams@petalogix.com>
- * Copyright (C) 2007 - 2009 PetaLogix
+ * Copyright (C) 2007 - 2011 PetaLogix
*
* This file is subject to the terms and conditions of the GNU General
* Public License. See the file COPYING in the main directory of this
@@ -46,11 +46,11 @@
#define PVR2_I_LMB_MASK 0x10000000
#define PVR2_INTERRUPT_IS_EDGE_MASK 0x08000000
#define PVR2_EDGE_IS_POSITIVE_MASK 0x04000000
-#define PVR2_D_PLB_MASK 0x02000000 /* new */
-#define PVR2_I_PLB_MASK 0x01000000 /* new */
-#define PVR2_INTERCONNECT 0x00800000 /* new */
-#define PVR2_USE_EXTEND_FSL 0x00080000 /* new */
-#define PVR2_USE_FSL_EXC 0x00040000 /* new */
+#define PVR2_D_PLB_MASK 0x02000000 /* new */
+#define PVR2_I_PLB_MASK 0x01000000 /* new */
+#define PVR2_INTERCONNECT 0x00800000 /* new */
+#define PVR2_USE_EXTEND_FSL 0x00080000 /* new */
+#define PVR2_USE_FSL_EXC 0x00040000 /* new */
#define PVR2_USE_MSR_INSTR 0x00020000
#define PVR2_USE_PCMP_INSTR 0x00010000
#define PVR2_AREA_OPTIMISED 0x00008000
@@ -59,7 +59,7 @@
#define PVR2_USE_HW_MUL_MASK 0x00001000
#define PVR2_USE_FPU_MASK 0x00000800
#define PVR2_USE_MUL64_MASK 0x00000400
-#define PVR2_USE_FPU2_MASK 0x00000200 /* new */
+#define PVR2_USE_FPU2_MASK 0x00000200 /* new */
#define PVR2_USE_IPLBEXC 0x00000100
#define PVR2_USE_DPLBEXC 0x00000080
#define PVR2_OPCODE_0x0_ILL_MASK 0x00000040
@@ -122,96 +122,103 @@
/* PVR access macros */
-#define PVR_IS_FULL(pvr) (pvr.pvr[0] & PVR0_PVR_FULL_MASK)
-#define PVR_USE_BARREL(pvr) (pvr.pvr[0] & PVR0_USE_BARREL_MASK)
-#define PVR_USE_DIV(pvr) (pvr.pvr[0] & PVR0_USE_DIV_MASK)
-#define PVR_USE_HW_MUL(pvr) (pvr.pvr[0] & PVR0_USE_HW_MUL_MASK)
-#define PVR_USE_FPU(pvr) (pvr.pvr[0] & PVR0_USE_FPU_MASK)
-#define PVR_USE_FPU2(pvr) (pvr.pvr[2] & PVR2_USE_FPU2_MASK)
-#define PVR_USE_ICACHE(pvr) (pvr.pvr[0] & PVR0_USE_ICACHE_MASK)
-#define PVR_USE_DCACHE(pvr) (pvr.pvr[0] & PVR0_USE_DCACHE_MASK)
-#define PVR_VERSION(pvr) ((pvr.pvr[0] & PVR0_VERSION_MASK) >> 8)
-#define PVR_USER1(pvr) (pvr.pvr[0] & PVR0_USER1_MASK)
-#define PVR_USER2(pvr) (pvr.pvr[1] & PVR1_USER2_MASK)
+#define PVR_IS_FULL(_pvr) (_pvr.pvr[0] & PVR0_PVR_FULL_MASK)
+#define PVR_USE_BARREL(_pvr) (_pvr.pvr[0] & PVR0_USE_BARREL_MASK)
+#define PVR_USE_DIV(_pvr) (_pvr.pvr[0] & PVR0_USE_DIV_MASK)
+#define PVR_USE_HW_MUL(_pvr) (_pvr.pvr[0] & PVR0_USE_HW_MUL_MASK)
+#define PVR_USE_FPU(_pvr) (_pvr.pvr[0] & PVR0_USE_FPU_MASK)
+#define PVR_USE_FPU2(_pvr) (_pvr.pvr[2] & PVR2_USE_FPU2_MASK)
+#define PVR_USE_ICACHE(_pvr) (_pvr.pvr[0] & PVR0_USE_ICACHE_MASK)
+#define PVR_USE_DCACHE(_pvr) (_pvr.pvr[0] & PVR0_USE_DCACHE_MASK)
+#define PVR_VERSION(_pvr) ((_pvr.pvr[0] & PVR0_VERSION_MASK) >> 8)
+#define PVR_USER1(_pvr) (_pvr.pvr[0] & PVR0_USER1_MASK)
+#define PVR_USER2(_pvr) (_pvr.pvr[1] & PVR1_USER2_MASK)
-#define PVR_D_OPB(pvr) (pvr.pvr[2] & PVR2_D_OPB_MASK)
-#define PVR_D_LMB(pvr) (pvr.pvr[2] & PVR2_D_LMB_MASK)
-#define PVR_I_OPB(pvr) (pvr.pvr[2] & PVR2_I_OPB_MASK)
-#define PVR_I_LMB(pvr) (pvr.pvr[2] & PVR2_I_LMB_MASK)
-#define PVR_INTERRUPT_IS_EDGE(pvr) \
- (pvr.pvr[2] & PVR2_INTERRUPT_IS_EDGE_MASK)
-#define PVR_EDGE_IS_POSITIVE(pvr) \
- (pvr.pvr[2] & PVR2_EDGE_IS_POSITIVE_MASK)
-#define PVR_USE_MSR_INSTR(pvr) (pvr.pvr[2] & PVR2_USE_MSR_INSTR)
-#define PVR_USE_PCMP_INSTR(pvr) (pvr.pvr[2] & PVR2_USE_PCMP_INSTR)
-#define PVR_AREA_OPTIMISED(pvr) (pvr.pvr[2] & PVR2_AREA_OPTIMISED)
-#define PVR_USE_MUL64(pvr) (pvr.pvr[2] & PVR2_USE_MUL64_MASK)
-#define PVR_OPCODE_0x0_ILLEGAL(pvr) \
- (pvr.pvr[2] & PVR2_OPCODE_0x0_ILL_MASK)
-#define PVR_UNALIGNED_EXCEPTION(pvr) \
- (pvr.pvr[2] & PVR2_UNALIGNED_EXC_MASK)
-#define PVR_ILL_OPCODE_EXCEPTION(pvr) \
- (pvr.pvr[2] & PVR2_ILL_OPCODE_EXC_MASK)
-#define PVR_IOPB_BUS_EXCEPTION(pvr) \
- (pvr.pvr[2] & PVR2_IOPB_BUS_EXC_MASK)
-#define PVR_DOPB_BUS_EXCEPTION(pvr) \
- (pvr.pvr[2] & PVR2_DOPB_BUS_EXC_MASK)
-#define PVR_DIV_ZERO_EXCEPTION(pvr) \
- (pvr.pvr[2] & PVR2_DIV_ZERO_EXC_MASK)
-#define PVR_FPU_EXCEPTION(pvr) (pvr.pvr[2] & PVR2_FPU_EXC_MASK)
-#define PVR_FSL_EXCEPTION(pvr) (pvr.pvr[2] & PVR2_USE_EXTEND_FSL)
+#define PVR_D_OPB(_pvr) (_pvr.pvr[2] & PVR2_D_OPB_MASK)
+#define PVR_D_LMB(_pvr) (_pvr.pvr[2] & PVR2_D_LMB_MASK)
+#define PVR_I_OPB(_pvr) (_pvr.pvr[2] & PVR2_I_OPB_MASK)
+#define PVR_I_LMB(_pvr) (_pvr.pvr[2] & PVR2_I_LMB_MASK)
+#define PVR_INTERRUPT_IS_EDGE(_pvr) \
+ (_pvr.pvr[2] & PVR2_INTERRUPT_IS_EDGE_MASK)
+#define PVR_EDGE_IS_POSITIVE(_pvr) \
+ (_pvr.pvr[2] & PVR2_EDGE_IS_POSITIVE_MASK)
+#define PVR_USE_MSR_INSTR(_pvr) (_pvr.pvr[2] & PVR2_USE_MSR_INSTR)
+#define PVR_USE_PCMP_INSTR(_pvr) (_pvr.pvr[2] & PVR2_USE_PCMP_INSTR)
+#define PVR_AREA_OPTIMISED(_pvr) (_pvr.pvr[2] & PVR2_AREA_OPTIMISED)
+#define PVR_USE_MUL64(_pvr) (_pvr.pvr[2] & PVR2_USE_MUL64_MASK)
+#define PVR_OPCODE_0x0_ILLEGAL(_pvr) \
+ (_pvr.pvr[2] & PVR2_OPCODE_0x0_ILL_MASK)
+#define PVR_UNALIGNED_EXCEPTION(_pvr) \
+ (_pvr.pvr[2] & PVR2_UNALIGNED_EXC_MASK)
+#define PVR_ILL_OPCODE_EXCEPTION(_pvr) \
+ (_pvr.pvr[2] & PVR2_ILL_OPCODE_EXC_MASK)
+#define PVR_IOPB_BUS_EXCEPTION(_pvr) \
+ (_pvr.pvr[2] & PVR2_IOPB_BUS_EXC_MASK)
+#define PVR_DOPB_BUS_EXCEPTION(_pvr) \
+ (_pvr.pvr[2] & PVR2_DOPB_BUS_EXC_MASK)
+#define PVR_DIV_ZERO_EXCEPTION(_pvr) \
+ (_pvr.pvr[2] & PVR2_DIV_ZERO_EXC_MASK)
+#define PVR_FPU_EXCEPTION(_pvr) (_pvr.pvr[2] & PVR2_FPU_EXC_MASK)
+#define PVR_FSL_EXCEPTION(_pvr) (_pvr.pvr[2] & PVR2_USE_EXTEND_FSL)
-#define PVR_DEBUG_ENABLED(pvr) (pvr.pvr[3] & PVR3_DEBUG_ENABLED_MASK)
-#define PVR_NUMBER_OF_PC_BRK(pvr) \
- ((pvr.pvr[3] & PVR3_NUMBER_OF_PC_BRK_MASK) >> 25)
-#define PVR_NUMBER_OF_RD_ADDR_BRK(pvr) \
- ((pvr.pvr[3] & PVR3_NUMBER_OF_RD_ADDR_BRK_MASK) >> 19)
-#define PVR_NUMBER_OF_WR_ADDR_BRK(pvr) \
- ((pvr.pvr[3] & PVR3_NUMBER_OF_WR_ADDR_BRK_MASK) >> 13)
-#define PVR_FSL_LINKS(pvr) ((pvr.pvr[3] & PVR3_FSL_LINKS_MASK) >> 7)
+#define PVR_DEBUG_ENABLED(_pvr) (_pvr.pvr[3] & PVR3_DEBUG_ENABLED_MASK)
+#define PVR_NUMBER_OF_PC_BRK(_pvr) \
+ ((_pvr.pvr[3] & PVR3_NUMBER_OF_PC_BRK_MASK) >> 25)
+#define PVR_NUMBER_OF_RD_ADDR_BRK(_pvr) \
+ ((_pvr.pvr[3] & PVR3_NUMBER_OF_RD_ADDR_BRK_MASK) >> 19)
+#define PVR_NUMBER_OF_WR_ADDR_BRK(_pvr) \
+ ((_pvr.pvr[3] & PVR3_NUMBER_OF_WR_ADDR_BRK_MASK) >> 13)
+#define PVR_FSL_LINKS(_pvr) ((_pvr.pvr[3] & PVR3_FSL_LINKS_MASK) >> 7)
-#define PVR_ICACHE_ADDR_TAG_BITS(pvr) \
- ((pvr.pvr[4] & PVR4_ICACHE_ADDR_TAG_BITS_MASK) >> 26)
-#define PVR_ICACHE_USE_FSL(pvr) (pvr.pvr[4] & PVR4_ICACHE_USE_FSL_MASK)
-#define PVR_ICACHE_ALLOW_WR(pvr) (pvr.pvr[4] & PVR4_ICACHE_ALLOW_WR_MASK)
-#define PVR_ICACHE_LINE_LEN(pvr) \
- (1 << ((pvr.pvr[4] & PVR4_ICACHE_LINE_LEN_MASK) >> 21))
-#define PVR_ICACHE_BYTE_SIZE(pvr) \
- (1 << ((pvr.pvr[4] & PVR4_ICACHE_BYTE_SIZE_MASK) >> 16))
+#define PVR_ICACHE_ADDR_TAG_BITS(_pvr) \
+ ((_pvr.pvr[4] & PVR4_ICACHE_ADDR_TAG_BITS_MASK) >> 26)
+#define PVR_ICACHE_USE_FSL(_pvr) \
+ (_pvr.pvr[4] & PVR4_ICACHE_USE_FSL_MASK)
+#define PVR_ICACHE_ALLOW_WR(_pvr) \
+ (_pvr.pvr[4] & PVR4_ICACHE_ALLOW_WR_MASK)
+#define PVR_ICACHE_LINE_LEN(_pvr) \
+ (1 << ((_pvr.pvr[4] & PVR4_ICACHE_LINE_LEN_MASK) >> 21))
+#define PVR_ICACHE_BYTE_SIZE(_pvr) \
+ (1 << ((_pvr.pvr[4] & PVR4_ICACHE_BYTE_SIZE_MASK) >> 16))
-#define PVR_DCACHE_ADDR_TAG_BITS(pvr) \
- ((pvr.pvr[5] & PVR5_DCACHE_ADDR_TAG_BITS_MASK) >> 26)
-#define PVR_DCACHE_USE_FSL(pvr) (pvr.pvr[5] & PVR5_DCACHE_USE_FSL_MASK)
-#define PVR_DCACHE_ALLOW_WR(pvr) (pvr.pvr[5] & PVR5_DCACHE_ALLOW_WR_MASK)
+#define PVR_DCACHE_ADDR_TAG_BITS(_pvr) \
+ ((_pvr.pvr[5] & PVR5_DCACHE_ADDR_TAG_BITS_MASK) >> 26)
+#define PVR_DCACHE_USE_FSL(_pvr) (_pvr.pvr[5] & PVR5_DCACHE_USE_FSL_MASK)
+#define PVR_DCACHE_ALLOW_WR(_pvr) \
+ (_pvr.pvr[5] & PVR5_DCACHE_ALLOW_WR_MASK)
/* FIXME two shifts on one line needs any comment */
-#define PVR_DCACHE_LINE_LEN(pvr) \
- (1 << ((pvr.pvr[5] & PVR5_DCACHE_LINE_LEN_MASK) >> 21))
-#define PVR_DCACHE_BYTE_SIZE(pvr) \
- (1 << ((pvr.pvr[5] & PVR5_DCACHE_BYTE_SIZE_MASK) >> 16))
+#define PVR_DCACHE_LINE_LEN(_pvr) \
+ (1 << ((_pvr.pvr[5] & PVR5_DCACHE_LINE_LEN_MASK) >> 21))
+#define PVR_DCACHE_BYTE_SIZE(_pvr) \
+ (1 << ((_pvr.pvr[5] & PVR5_DCACHE_BYTE_SIZE_MASK) >> 16))
-#define PVR_DCACHE_USE_WRITEBACK(pvr) \
- ((pvr.pvr[5] & PVR5_DCACHE_USE_WRITEBACK) >> 14)
+#define PVR_DCACHE_USE_WRITEBACK(_pvr) \
+ ((_pvr.pvr[5] & PVR5_DCACHE_USE_WRITEBACK) >> 14)
-#define PVR_ICACHE_BASEADDR(pvr) (pvr.pvr[6] & PVR6_ICACHE_BASEADDR_MASK)
-#define PVR_ICACHE_HIGHADDR(pvr) (pvr.pvr[7] & PVR7_ICACHE_HIGHADDR_MASK)
+#define PVR_ICACHE_BASEADDR(_pvr) \
+ (_pvr.pvr[6] & PVR6_ICACHE_BASEADDR_MASK)
+#define PVR_ICACHE_HIGHADDR(_pvr) \
+ (_pvr.pvr[7] & PVR7_ICACHE_HIGHADDR_MASK)
+#define PVR_DCACHE_BASEADDR(_pvr) \
+ (_pvr.pvr[8] & PVR8_DCACHE_BASEADDR_MASK)
+#define PVR_DCACHE_HIGHADDR(_pvr) \
+ (_pvr.pvr[9] & PVR9_DCACHE_HIGHADDR_MASK)
-#define PVR_DCACHE_BASEADDR(pvr) (pvr.pvr[8] & PVR8_DCACHE_BASEADDR_MASK)
-#define PVR_DCACHE_HIGHADDR(pvr) (pvr.pvr[9] & PVR9_DCACHE_HIGHADDR_MASK)
+#define PVR_TARGET_FAMILY(_pvr) \
+ ((_pvr.pvr[10] & PVR10_TARGET_FAMILY_MASK) >> 24)
-#define PVR_TARGET_FAMILY(pvr) ((pvr.pvr[10] & PVR10_TARGET_FAMILY_MASK) >> 24)
-
-#define PVR_MSR_RESET_VALUE(pvr) \
- (pvr.pvr[11] & PVR11_MSR_RESET_VALUE_MASK)
+#define PVR_MSR_RESET_VALUE(_pvr) \
+ (_pvr.pvr[11] & PVR11_MSR_RESET_VALUE_MASK)
/* mmu */
-#define PVR_USE_MMU(pvr) ((pvr.pvr[11] & PVR11_USE_MMU) >> 30)
-#define PVR_MMU_ITLB_SIZE(pvr) (pvr.pvr[11] & PVR11_MMU_ITLB_SIZE)
-#define PVR_MMU_DTLB_SIZE(pvr) (pvr.pvr[11] & PVR11_MMU_DTLB_SIZE)
-#define PVR_MMU_TLB_ACCESS(pvr) (pvr.pvr[11] & PVR11_MMU_TLB_ACCESS)
-#define PVR_MMU_ZONES(pvr) (pvr.pvr[11] & PVR11_MMU_ZONES)
+#define PVR_USE_MMU(_pvr) ((_pvr.pvr[11] & PVR11_USE_MMU) >> 30)
+#define PVR_MMU_ITLB_SIZE(_pvr) (_pvr.pvr[11] & PVR11_MMU_ITLB_SIZE)
+#define PVR_MMU_DTLB_SIZE(_pvr) (_pvr.pvr[11] & PVR11_MMU_DTLB_SIZE)
+#define PVR_MMU_TLB_ACCESS(_pvr) (_pvr.pvr[11] & PVR11_MMU_TLB_ACCESS)
+#define PVR_MMU_ZONES(_pvr) (_pvr.pvr[11] & PVR11_MMU_ZONES)
/* endian */
-#define PVR_ENDIAN(pvr) (pvr.pvr[0] & PVR0_ENDI)
+#define PVR_ENDIAN(_pvr) (_pvr.pvr[0] & PVR0_ENDI)
int cpu_has_pvr(void);
void get_pvr(struct pvr_s *pvr);
diff --git a/arch/microblaze/kernel/cpu/cpuinfo.c b/arch/microblaze/kernel/cpu/cpuinfo.c
index 87c79fa..2c309fc 100644
--- a/arch/microblaze/kernel/cpu/cpuinfo.c
+++ b/arch/microblaze/kernel/cpu/cpuinfo.c
@@ -32,6 +32,7 @@
{"7.30.a", 0x10},
{"7.30.b", 0x11},
{"8.00.a", 0x12},
+ {"8.00.b", 0x13},
{NULL, 0},
};
diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S
index 819238b..41c30cd 100644
--- a/arch/microblaze/kernel/entry.S
+++ b/arch/microblaze/kernel/entry.S
@@ -287,25 +287,44 @@
* are masked. This is nice, means we don't have to CLI before state save
*/
C_ENTRY(_user_exception):
- addi r14, r14, 4 /* return address is 4 byte after call */
swi r1, r0, TOPHYS(PER_CPU(ENTRY_SP)) /* save stack */
+ addi r14, r14, 4 /* return address is 4 byte after call */
+ mfs r1, rmsr
+ nop
+ andi r1, r1, MSR_UMS
+ bnei r1, 1f
+
+/* Kernel-mode state save - kernel execve */
+ lwi r1, r0, TOPHYS(PER_CPU(ENTRY_SP)); /* Reload kernel stack-ptr*/
+ tophys(r1,r1);
+
+ addik r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack. */
+ SAVE_REGS
+
+ swi r1, r1, PTO + PT_MODE; /* pt_regs -> kernel mode */
+ brid 2f;
+ nop; /* Fill delay slot */
+
+/* User-mode state save. */
+1:
lwi r1, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */
tophys(r1,r1);
lwi r1, r1, TS_THREAD_INFO; /* get stack from task_struct */
- /* MS these three instructions can be added to one */
- /* addik r1, r1, THREAD_SIZE; */
- /* tophys(r1,r1); */
- /* addik r1, r1, -STATE_SAVE_SIZE; */
- addik r1, r1, THREAD_SIZE + CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START - STATE_SAVE_SIZE;
+/* calculate kernel stack pointer from task struct 8k */
+ addik r1, r1, THREAD_SIZE;
+ tophys(r1,r1);
+
+ addik r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack. */
SAVE_REGS
swi r0, r1, PTO + PT_R3
swi r0, r1, PTO + PT_R4
+ swi r0, r1, PTO + PT_MODE; /* Was in user-mode. */
lwi r11, r0, TOPHYS(PER_CPU(ENTRY_SP));
swi r11, r1, PTO+PT_R1; /* Store user SP. */
clear_ums;
- lwi CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE));
+2: lwi CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE));
/* Save away the syscall number. */
swi r12, r1, PTO+PT_R0;
tovirt(r1,r1)
@@ -375,6 +394,9 @@
swi r3, r1, PTO + PT_R3
swi r4, r1, PTO + PT_R4
+ lwi r11, r1, PTO + PT_MODE;
+/* See if returning to kernel mode, if so, skip resched &c. */
+ bnei r11, 2f;
/* We're returning to user mode, so check for various conditions that
* trigger rescheduling. */
/* FIXME: Restructure all these flag checks. */
@@ -417,6 +439,16 @@
RESTORE_REGS;
addik r1, r1, STATE_SAVE_SIZE /* Clean up stack space. */
lwi r1, r1, PT_R1 - PT_SIZE;/* Restore user stack pointer. */
+ bri 6f;
+
+/* Return to kernel state. */
+2: set_bip; /* Ints masked for state restore */
+ VM_OFF;
+ tophys(r1,r1);
+ RESTORE_REGS;
+ addik r1, r1, STATE_SAVE_SIZE /* Clean up stack space. */
+ tovirt(r1,r1);
+6:
TRAP_return: /* Make global symbol for debugging */
rtbd r14, 0; /* Instructions to return from an IRQ */
nop;
diff --git a/arch/microblaze/kernel/exceptions.c b/arch/microblaze/kernel/exceptions.c
index 478f294..a7fa6ae7 100644
--- a/arch/microblaze/kernel/exceptions.c
+++ b/arch/microblaze/kernel/exceptions.c
@@ -25,6 +25,7 @@
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <asm/current.h>
+#include <asm/cacheflush.h>
#define MICROBLAZE_ILL_OPCODE_EXCEPTION 0x02
#define MICROBLAZE_IBUS_EXCEPTION 0x03
@@ -52,6 +53,8 @@
void sw_exception(struct pt_regs *regs)
{
_exception(SIGTRAP, regs, TRAP_BRKPT, regs->r16);
+ flush_dcache_range(regs->r16, regs->r16 + 0x4);
+ flush_icache_range(regs->r16, regs->r16 + 0x4);
}
void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr)
diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S
index 7811954..25f6e07 100644
--- a/arch/microblaze/kernel/hw_exception_handler.S
+++ b/arch/microblaze/kernel/hw_exception_handler.S
@@ -945,11 +945,20 @@
store4: sbi r3, r4, 3; /* Delay slot */
ex_shw_vm:
/* Store the lower half-word, byte-by-byte into destination address */
+#ifdef __MICROBLAZEEL__
+ lbui r3, r5, 0;
+store5: sbi r3, r4, 0;
+ lbui r3, r5, 1;
+ brid ret_from_exc;
+store6: sbi r3, r4, 1; /* Delay slot */
+#else
lbui r3, r5, 2;
store5: sbi r3, r4, 0;
lbui r3, r5, 3;
brid ret_from_exc;
store6: sbi r3, r4, 1; /* Delay slot */
+#endif
+
ex_sw_end_vm: /* Exception handling of store word, ends. */
/* We have to prevent cases that get/put_user macros get unaligned pointer
diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c
index a105301..c881393 100644
--- a/arch/microblaze/kernel/prom.c
+++ b/arch/microblaze/kernel/prom.c
@@ -61,14 +61,12 @@
char *p;
int *addr;
- pr_debug("search \"chosen\", depth: %d, uname: %s\n", depth, uname);
+ pr_debug("search \"serial\", depth: %d, uname: %s\n", depth, uname);
/* find all serial nodes */
if (strncmp(uname, "serial", 6) != 0)
return 0;
- early_init_dt_check_for_initrd(node);
-
/* find compatible node with uartlite */
p = of_get_flat_dt_prop(node, "compatible", &l);
if ((strncmp(p, "xlnx,xps-uartlite", 17) != 0) &&
diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S
index 96a88c3..3451bde 100644
--- a/arch/microblaze/kernel/vmlinux.lds.S
+++ b/arch/microblaze/kernel/vmlinux.lds.S
@@ -123,20 +123,10 @@
__init_end_before_initramfs = .;
- .init.ramfs ALIGN(PAGE_SIZE) : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
- __initramfs_start = .;
- *(.init.ramfs)
- __initramfs_end = .;
- . = ALIGN(4);
- LONG(0);
-/*
- * FIXME this can break initramfs for MMU.
- * Pad init.ramfs up to page boundary,
- * so that __init_end == __bss_start. This will make image.elf
- * consistent with the image.bin
- */
- /* . = ALIGN(PAGE_SIZE); */
+ .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
+ INIT_RAM_FS
}
+
__init_end = .;
.bss ALIGN (PAGE_SIZE) : AT(ADDR(.bss) - LOAD_OFFSET) {
diff --git a/arch/microblaze/lib/memmove.c b/arch/microblaze/lib/memmove.c
index 123e361..810fd68 100644
--- a/arch/microblaze/lib/memmove.c
+++ b/arch/microblaze/lib/memmove.c
@@ -182,7 +182,7 @@
for (; c >= 4; c -= 4) {
value = *--i_src;
*--i_dst = buf_hold | ((value & 0xFF000000)>> 24);
- buf_hold = (value & 0xFFFFFF) << 8;;
+ buf_hold = (value & 0xFFFFFF) << 8;
}
#endif
/* Realign the source */
diff --git a/arch/microblaze/lib/muldi3.S b/arch/microblaze/lib/muldi3.S
deleted file mode 100644
index ceeaa8c..0000000
--- a/arch/microblaze/lib/muldi3.S
+++ /dev/null
@@ -1,121 +0,0 @@
-#include <linux/linkage.h>
-
-/*
- * Multiply operation for 64 bit integers, for devices with hard multiply
- * Input : Operand1[H] in Reg r5
- * Operand1[L] in Reg r6
- * Operand2[H] in Reg r7
- * Operand2[L] in Reg r8
- * Output: Result[H] in Reg r3
- * Result[L] in Reg r4
- *
- * Explaination:
- *
- * Both the input numbers are divided into 16 bit number as follows
- * op1 = A B C D
- * op2 = E F G H
- * result = D * H
- * + (C * H + D * G) << 16
- * + (B * H + C * G + D * F) << 32
- * + (A * H + B * G + C * F + D * E) << 48
- *
- * Only 64 bits of the output are considered
- */
-
- .text
- .globl __muldi3
- .type __muldi3, @function
- .ent __muldi3
-
-__muldi3:
- addi r1, r1, -40
-
-/* Save the input operands on the caller's stack */
- swi r5, r1, 44
- swi r6, r1, 48
- swi r7, r1, 52
- swi r8, r1, 56
-
-/* Store all the callee saved registers */
- sw r20, r1, r0
- swi r21, r1, 4
- swi r22, r1, 8
- swi r23, r1, 12
- swi r24, r1, 16
- swi r25, r1, 20
- swi r26, r1, 24
- swi r27, r1, 28
-
-/* Load all the 16 bit values for A thru H */
- lhui r20, r1, 44 /* A */
- lhui r21, r1, 46 /* B */
- lhui r22, r1, 48 /* C */
- lhui r23, r1, 50 /* D */
- lhui r24, r1, 52 /* E */
- lhui r25, r1, 54 /* F */
- lhui r26, r1, 56 /* G */
- lhui r27, r1, 58 /* H */
-
-/* D * H ==> LSB of the result on stack ==> Store1 */
- mul r9, r23, r27
- swi r9, r1, 36 /* Pos2 and Pos3 */
-
-/* Hi (Store1) + C * H + D * G ==> Store2 ==> Pos1 and Pos2 */
-/* Store the carry generated in position 2 for Pos 3 */
- lhui r11, r1, 36 /* Pos2 */
- mul r9, r22, r27 /* C * H */
- mul r10, r23, r26 /* D * G */
- add r9, r9, r10
- addc r12, r0, r0
- add r9, r9, r11
- addc r12, r12, r0 /* Store the Carry */
- shi r9, r1, 36 /* Store Pos2 */
- swi r9, r1, 32
- lhui r11, r1, 32
- shi r11, r1, 34 /* Store Pos1 */
-
-/* Hi (Store2) + B * H + C * G + D * F ==> Store3 ==> Pos0 and Pos1 */
- mul r9, r21, r27 /* B * H */
- mul r10, r22, r26 /* C * G */
- mul r7, r23, r25 /* D * F */
- add r9, r9, r11
- add r9, r9, r10
- add r9, r9, r7
- swi r9, r1, 32 /* Pos0 and Pos1 */
-
-/* Hi (Store3) + A * H + B * G + C * F + D * E ==> Store3 ==> Pos0 */
- lhui r11, r1, 32 /* Pos0 */
- mul r9, r20, r27 /* A * H */
- mul r10, r21, r26 /* B * G */
- mul r7, r22, r25 /* C * F */
- mul r8, r23, r24 /* D * E */
- add r9, r9, r11
- add r9, r9, r10
- add r9, r9, r7
- add r9, r9, r8
- sext16 r9, r9 /* Sign extend the MSB */
- shi r9, r1, 32
-
-/* Move results to r3 and r4 */
- lhui r3, r1, 32
- add r3, r3, r12
- shi r3, r1, 32
- lwi r3, r1, 32 /* Hi Part */
- lwi r4, r1, 36 /* Lo Part */
-
-/* Restore Callee saved registers */
- lw r20, r1, r0
- lwi r21, r1, 4
- lwi r22, r1, 8
- lwi r23, r1, 12
- lwi r24, r1, 16
- lwi r25, r1, 20
- lwi r26, r1, 24
- lwi r27, r1, 28
-
-/* Restore Frame and return */
- rtsd r15, 8
- addi r1, r1, 40
-
-.size __muldi3, . - __muldi3
-.end __muldi3
diff --git a/arch/microblaze/lib/muldi3.c b/arch/microblaze/lib/muldi3.c
new file mode 100644
index 0000000..d4860e1
--- /dev/null
+++ b/arch/microblaze/lib/muldi3.c
@@ -0,0 +1,60 @@
+#include <linux/module.h>
+
+#include "libgcc.h"
+
+#define DWtype long long
+#define UWtype unsigned long
+#define UHWtype unsigned short
+
+#define W_TYPE_SIZE 32
+
+#define __ll_B ((UWtype) 1 << (W_TYPE_SIZE / 2))
+#define __ll_lowpart(t) ((UWtype) (t) & (__ll_B - 1))
+#define __ll_highpart(t) ((UWtype) (t) >> (W_TYPE_SIZE / 2))
+
+/* If we still don't have umul_ppmm, define it using plain C. */
+#if !defined(umul_ppmm)
+#define umul_ppmm(w1, w0, u, v) \
+ do { \
+ UWtype __x0, __x1, __x2, __x3; \
+ UHWtype __ul, __vl, __uh, __vh; \
+ \
+ __ul = __ll_lowpart(u); \
+ __uh = __ll_highpart(u); \
+ __vl = __ll_lowpart(v); \
+ __vh = __ll_highpart(v); \
+ \
+ __x0 = (UWtype) __ul * __vl; \
+ __x1 = (UWtype) __ul * __vh; \
+ __x2 = (UWtype) __uh * __vl; \
+ __x3 = (UWtype) __uh * __vh; \
+ \
+ __x1 += __ll_highpart(__x0); /* this can't give carry */\
+ __x1 += __x2; /* but this indeed can */ \
+ if (__x1 < __x2) /* did we get it? */ \
+ __x3 += __ll_B; /* yes, add it in the proper pos */ \
+ \
+ (w1) = __x3 + __ll_highpart(__x1); \
+ (w0) = __ll_lowpart(__x1) * __ll_B + __ll_lowpart(__x0);\
+ } while (0)
+#endif
+
+#if !defined(__umulsidi3)
+#define __umulsidi3(u, v) ({ \
+ DWunion __w; \
+ umul_ppmm(__w.s.high, __w.s.low, u, v); \
+ __w.ll; \
+ })
+#endif
+
+DWtype __muldi3(DWtype u, DWtype v)
+{
+ const DWunion uu = {.ll = u};
+ const DWunion vv = {.ll = v};
+ DWunion w = {.ll = __umulsidi3(uu.s.low, vv.s.low)};
+
+ w.s.high += ((UWtype) uu.s.low * (UWtype) vv.s.high
+ + (UWtype) uu.s.high * (UWtype) vv.s.low);
+
+ return w.ll;
+}