[SCSI] qla4xxx: Handle outstanding mbx cmds on hung f/w scenarios
Outstanding mailbox commands, have no way to recover on f/w hung, and we
timeout on waiting for mbx response. This in turn affects the recovery process
as follows:
- We might already be in dpc while waiting for mbx to complete, so recovery for
that pci function will never get invoked. Reset Timeout (10 sec) is far less
than mbx timeout (30 sec).
- Other mbx cmds will get stuck due to serial mbx access.
Solution is to identify fw-hung scenario and handle outstanding mbx commands to
have an early-exit instead of waiting for response.
Other mbx commands waiting for access will also do an early-exit if fw-hung is
still applicable.
Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h
index 6af5d04..6c92627 100644
--- a/drivers/scsi/qla4xxx/ql4_def.h
+++ b/drivers/scsi/qla4xxx/ql4_def.h
@@ -380,6 +380,7 @@
#define AF_MSI_ENABLED 16 /* 0x00010000 */
#define AF_MSIX_ENABLED 17 /* 0x00020000 */
#define AF_MBOX_COMMAND_NOPOLL 18 /* 0x00040000 */
+#define AF_FW_RECOVERY 19 /* 0x00080000 */
unsigned long dpc_flags;
diff --git a/drivers/scsi/qla4xxx/ql4_glbl.h b/drivers/scsi/qla4xxx/ql4_glbl.h
index c9cd5d6..ea3db23 100644
--- a/drivers/scsi/qla4xxx/ql4_glbl.h
+++ b/drivers/scsi/qla4xxx/ql4_glbl.h
@@ -93,6 +93,7 @@
void qla4xxx_process_response_queue(struct scsi_qla_host *ha);
void qla4xxx_wake_dpc(struct scsi_qla_host *ha);
void qla4xxx_get_conn_event_log(struct scsi_qla_host *ha);
+void qla4xxx_mailbox_premature_completion(struct scsi_qla_host *ha);
void qla4_8xxx_pci_config(struct scsi_qla_host *);
int qla4_8xxx_iospace_config(struct scsi_qla_host *ha);
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index c4e036b..1003e48 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -39,6 +39,15 @@
"pointer\n", ha->host_no, __func__));
return status;
}
+
+ if (is_qla8022(ha) &&
+ test_bit(AF_FW_RECOVERY, &ha->flags)) {
+ DEBUG2(ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: prematurely "
+ "completing mbx cmd as firmware recovery detected\n",
+ ha->host_no, __func__));
+ return status;
+ }
+
/* Mailbox code active */
wait_count = MBOX_TOV * 100;
@@ -196,6 +205,14 @@
/* Check for mailbox timeout. */
if (!test_bit(AF_MBOX_COMMAND_DONE, &ha->flags)) {
+ if (is_qla8022(ha) &&
+ test_bit(AF_FW_RECOVERY, &ha->flags)) {
+ DEBUG2(ql4_printk(KERN_INFO, ha,
+ "scsi%ld: %s: prematurely completing mbx cmd as "
+ "firmware recovery detected\n",
+ ha->host_no, __func__));
+ goto mbox_exit;
+ }
DEBUG2(printk("scsi%ld: Mailbox Cmd 0x%08X timed out ...,"
" Scheduling Adapter Reset\n", ha->host_no,
mbx_cmd[0]));
@@ -246,6 +263,28 @@
return status;
}
+void qla4xxx_mailbox_premature_completion(struct scsi_qla_host *ha)
+{
+ set_bit(AF_FW_RECOVERY, &ha->flags);
+ ql4_printk(KERN_INFO, ha, "scsi%ld: %s: set FW RECOVERY!\n",
+ ha->host_no, __func__);
+
+ if (test_bit(AF_MBOX_COMMAND, &ha->flags)) {
+ if (test_bit(AF_MBOX_COMMAND_NOPOLL, &ha->flags)) {
+ complete(&ha->mbx_intr_comp);
+ ql4_printk(KERN_INFO, ha, "scsi%ld: %s: Due to fw "
+ "recovery, doing premature completion of "
+ "mbx cmd\n", ha->host_no, __func__);
+
+ } else {
+ set_bit(AF_MBOX_COMMAND_DONE, &ha->flags);
+ ql4_printk(KERN_INFO, ha, "scsi%ld: %s: Due to fw "
+ "recovery, doing premature completion of "
+ "polling mbx cmd\n", ha->host_no, __func__);
+ }
+ }
+}
+
static uint8_t
qla4xxx_set_ifcb(struct scsi_qla_host *ha, uint32_t *mbox_cmd,
uint32_t *mbox_sts, dma_addr_t init_fw_cb_dma)
diff --git a/drivers/scsi/qla4xxx/ql4_nx.c b/drivers/scsi/qla4xxx/ql4_nx.c
index ec46651..0830ea9 100644
--- a/drivers/scsi/qla4xxx/ql4_nx.c
+++ b/drivers/scsi/qla4xxx/ql4_nx.c
@@ -2105,6 +2105,9 @@
qla4_8xxx_clear_rst_ready(ha);
qla4_8xxx_idc_unlock(ha);
+ if (rval == QLA_SUCCESS)
+ clear_bit(AF_FW_RECOVERY, &ha->flags);
+
return rval;
}
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index e575d76..2bb362c 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -663,6 +663,7 @@
ha->seconds_since_last_heartbeat = 0;
halt_status = qla4_8xxx_rd_32(ha,
QLA82XX_PEG_HALT_STATUS1);
+
/* Since we cannot change dev_state in interrupt
* context, set appropriate DPC flag then wakeup
* DPC */
@@ -674,6 +675,7 @@
set_bit(DPC_RESET_HA, &ha->dpc_flags);
}
qla4xxx_wake_dpc(ha);
+ qla4xxx_mailbox_premature_completion(ha);
}
}
ha->fw_heartbeat_counter = fw_heartbeat_counter;
@@ -699,6 +701,7 @@
ha->host_no, __func__);
set_bit(DPC_RESET_HA, &ha->dpc_flags);
qla4xxx_wake_dpc(ha);
+ qla4xxx_mailbox_premature_completion(ha);
} else if (dev_state == QLA82XX_DEV_NEED_QUIESCENT &&
!test_bit(DPC_HA_NEED_QUIESCENT, &ha->dpc_flags)) {
printk("scsi%ld: %s: HW State: NEED QUIES!\n",