Merge tag 'media/v3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Two new dvb frontend drivers: mn88472 and mn88473
- A new driver for some PCIe DVBSky cards
- A new remote controller driver: meson-ir
- One LIRC staging driver got rewritten and promoted to mainstream:
igorplugusb
- A new tuner driver (m88rs6000t)
- The old omap2 media driver got removed from staging. This driver
uses an old DMA API and it is likely broken on recent kernels.
Nobody cared enough to fix it
- Media bus format moved to a separate header, as DRM will also use the
definitions there
- mem2mem_testdev were renamed to vim2m, in order to use the same
naming convention taken by the other virtual test driver (vivid)
- Added a new driver for coda SoC (coda-jpeg)
- The cx88 driver got converted to use videobuf2 core
- Make DMABUF export buffer to work with DMA Scatter/Gather and Vmalloc
cores
- Lots of other fixes, improvements and cleanups on the drivers.
* tag 'media/v3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (384 commits)
[media] mn88473: One function call less in mn88473_init() after error
[media] mn88473: Remove uneeded check before release_firmware()
[media] lirc_zilog: Deletion of unnecessary checks before vfree()
[media] MAINTAINERS: Add myself as img-ir maintainer
[media] img-ir: Don't set driver's module owner
[media] img-ir: Depend on METAG or MIPS or COMPILE_TEST
[media] img-ir/hw: Drop [un]register_decoder declarations
[media] img-ir/hw: Fix potential deadlock stopping timer
[media] img-ir/hw: Always read data to clear buffer
[media] redrat3: ensure dma is setup properly
[media] ddbridge: remove unneeded check before dvb_unregister_device()
[media] si2157: One function call less in si2157_init() after error
[media] tuners: remove uneeded checks before release_firmware()
[media] arm: omap2: rx51-peripherals: fix build warning
[media] stv090x: add an extra protetion against buffer overflow
[media] stv090x: Remove an unreachable code
[media] stv090x: Some whitespace cleanups
[media] em28xx: checkpatch cleanup: whitespaces/new lines cleanups
[media] si2168: add support for firmware files in new format
[media] si2168: debug printout for firmware version
...
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
index 03bcff8..b67ede5 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -143,5 +143,12 @@
#size-cells = <0>;
status = "disabled";
};
+
+ ir_receiver: ir-receiver@c8100480 {
+ compatible= "amlogic,meson6-ir";
+ reg = <0xc8100480 0x20>;
+ interrupts = <0 15 1>;
+ status = "disabled";
+ };
};
}; /* end of / */
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 06d63d5..b46b4d2 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -294,7 +294,7 @@
.default_mode = "ntsc",
.num_modes = ARRAY_SIZE(dm355evm_enc_preset_timing),
.modes = dm355evm_enc_preset_timing,
- .if_params = V4L2_MBUS_FMT_FIXED,
+ .if_params = MEDIA_BUS_FMT_FIXED,
},
};
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index e08a868..a756003 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -485,7 +485,7 @@
.default_mode = "ntsc",
.num_modes = ARRAY_SIZE(dm365evm_enc_std_timing),
.modes = dm365evm_enc_std_timing,
- .if_params = V4L2_MBUS_FMT_FIXED,
+ .if_params = MEDIA_BUS_FMT_FIXED,
},
{
.output = {
@@ -498,7 +498,7 @@
.default_mode = "480p59_94",
.num_modes = ARRAY_SIZE(dm365evm_enc_preset_timing),
.modes = dm365evm_enc_preset_timing,
- .if_params = V4L2_MBUS_FMT_FIXED,
+ .if_params = MEDIA_BUS_FMT_FIXED,
},
};
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 2f3ed3a..9cbeda7 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -785,14 +785,13 @@
},
};
-static int dm355_vpbe_setup_pinmux(enum v4l2_mbus_pixelcode if_type,
- int field)
+static int dm355_vpbe_setup_pinmux(u32 if_type, int field)
{
switch (if_type) {
- case V4L2_MBUS_FMT_SGRBG8_1X8:
+ case MEDIA_BUS_FMT_SGRBG8_1X8:
davinci_cfg_reg(DM355_VOUT_FIELD_G70);
break;
- case V4L2_MBUS_FMT_YUYV10_1X20:
+ case MEDIA_BUS_FMT_YUYV10_1X20:
if (field)
davinci_cfg_reg(DM355_VOUT_FIELD);
else
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 0ae8114..e3a3c54 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -1306,16 +1306,15 @@
},
};
-static int dm365_vpbe_setup_pinmux(enum v4l2_mbus_pixelcode if_type,
- int field)
+static int dm365_vpbe_setup_pinmux(u32 if_type, int field)
{
switch (if_type) {
- case V4L2_MBUS_FMT_SGRBG8_1X8:
+ case MEDIA_BUS_FMT_SGRBG8_1X8:
davinci_cfg_reg(DM365_VOUT_FIELD_G81);
davinci_cfg_reg(DM365_VOUT_COUTL_EN);
davinci_cfg_reg(DM365_VOUT_COUTH_EN);
break;
- case V4L2_MBUS_FMT_YUYV10_1X20:
+ case MEDIA_BUS_FMT_YUYV10_1X20:
if (field)
davinci_cfg_reg(DM365_VOUT_FIELD);
else
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 03502ab..14edcd7 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -23,6 +23,7 @@
#include <linux/regulator/machine.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
+#include <linux/gpio/machine.h>
#include <linux/omap-gpmc.h>
#include <linux/mmc/host.h>
#include <linux/power/isp1704_charger.h>
@@ -38,7 +39,6 @@
#include <sound/tlv320aic3x.h>
#include <sound/tpa6130a2-plat.h>
-#include <media/radio-si4713.h>
#include <media/si4713.h>
#include <linux/platform_data/leds-lp55xx.h>
@@ -756,46 +756,17 @@
},
};
-static const char * const si4713_supply_names[] = {
- "vio",
- "vdd",
-};
-
-static struct si4713_platform_data rx51_si4713_i2c_data __initdata_or_module = {
- .supplies = ARRAY_SIZE(si4713_supply_names),
- .supply_names = si4713_supply_names,
- .gpio_reset = RX51_FMTX_RESET_GPIO,
-};
-
-static struct i2c_board_info rx51_si4713_board_info __initdata_or_module = {
- I2C_BOARD_INFO("si4713", SI4713_I2C_ADDR_BUSEN_HIGH),
- .platform_data = &rx51_si4713_i2c_data,
-};
-
-static struct radio_si4713_platform_data rx51_si4713_data __initdata_or_module = {
- .i2c_bus = 2,
- .subdev_board_info = &rx51_si4713_board_info,
-};
-
-static struct platform_device rx51_si4713_dev __initdata_or_module = {
- .name = "radio-si4713",
- .id = -1,
- .dev = {
- .platform_data = &rx51_si4713_data,
+static struct gpiod_lookup_table rx51_fmtx_gpios_table = {
+ .dev_id = "2-0063",
+ .table = {
+ GPIO_LOOKUP("gpio.6", 3, "reset", GPIO_ACTIVE_HIGH), /* 163 */
+ { },
},
};
-static __init void rx51_init_si4713(void)
+static __init void rx51_gpio_init(void)
{
- int err;
-
- err = gpio_request_one(RX51_FMTX_IRQ, GPIOF_DIR_IN, "si4713 irq");
- if (err) {
- printk(KERN_ERR "Cannot request si4713 irq gpio. %d\n", err);
- return;
- }
- rx51_si4713_board_info.irq = gpio_to_irq(RX51_FMTX_IRQ);
- platform_device_register(&rx51_si4713_dev);
+ gpiod_add_lookup_table(&rx51_fmtx_gpios_table);
}
static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
@@ -1025,7 +996,19 @@
.gpio_reset = 60,
};
+#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713)
+static struct si4713_platform_data rx51_si4713_platform_data = {
+ .is_platform_device = true
+};
+#endif
+
static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = {
+#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713)
+ {
+ I2C_BOARD_INFO("si4713", 0x63),
+ .platform_data = &rx51_si4713_platform_data,
+ },
+#endif
{
I2C_BOARD_INFO("tlv320aic3x", 0x18),
.platform_data = &rx51_aic3x_data,
@@ -1066,6 +1049,10 @@
static int __init rx51_i2c_init(void)
{
+#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713)
+ int err;
+#endif
+
if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) ||
system_rev >= SYSTEM_REV_B_USES_VAUX3) {
rx51_twldata.vaux3 = &rx51_vaux3_mmc;
@@ -1083,6 +1070,14 @@
rx51_twldata.vdac->constraints.name = "VDAC";
omap_pmic_init(1, 2200, "twl5030", 7 + OMAP_INTC_START, &rx51_twldata);
+#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713)
+ err = gpio_request_one(RX51_FMTX_IRQ, GPIOF_DIR_IN, "si4713 irq");
+ if (err) {
+ printk(KERN_ERR "Cannot request si4713 irq gpio. %d\n", err);
+ return err;
+ }
+ rx51_peripherals_i2c_board_info_2[0].irq = gpio_to_irq(RX51_FMTX_IRQ);
+#endif
omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)
@@ -1269,13 +1264,13 @@
void __init rx51_peripherals_init(void)
{
+ rx51_gpio_init();
rx51_i2c_init();
regulator_has_full_constraints();
gpmc_onenand_init(board_onenand_data);
rx51_add_gpio_keys();
rx51_init_wl1251();
rx51_init_tsc2005();
- rx51_init_si4713();
rx51_init_lirc();
spi_register_board_info(rx51_peripherals_spi_board_info,
ARRAY_SIZE(rx51_peripherals_spi_board_info));
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index a7bc4ce..1afb50d 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -67,28 +67,6 @@
}
omap_postcore_initcall(omap3_l3_init);
-#if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
-
-static struct resource omap2cam_resources[] = {
- {
- .start = OMAP24XX_CAMERA_BASE,
- .end = OMAP24XX_CAMERA_BASE + 0xfff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = 24 + OMAP_INTC_START,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device omap2cam_device = {
- .name = "omap24xxcam",
- .id = -1,
- .num_resources = ARRAY_SIZE(omap2cam_resources),
- .resource = omap2cam_resources,
-};
-#endif
-
#if defined(CONFIG_IOMMU_API)
#include <linux/platform_data/iommu-omap.h>
@@ -211,14 +189,6 @@
#endif
-static inline void omap_init_camera(void)
-{
-#if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
- if (cpu_is_omap24xx())
- platform_device_register(&omap2cam_device);
-#endif
-}
-
#if defined(CONFIG_OMAP2PLUS_MBOX) || defined(CONFIG_OMAP2PLUS_MBOX_MODULE)
static inline void __init omap_init_mbox(void)
{
@@ -397,7 +367,6 @@
* in alphabetical order so they're easier to sort through.
*/
omap_init_audio();
- omap_init_camera();
/* If dtb is there, the devices will be created dynamically */
if (!of_have_populated_dt()) {
omap_init_mbox();
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index ed10870..a1c1dfb 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -1149,7 +1149,7 @@
.format_name = "UYVY",
.format_depth = 16,
.format = {
- .code = V4L2_MBUS_FMT_UYVY8_2X8,
+ .code = MEDIA_BUS_FMT_UYVY8_2X8,
.colorspace = V4L2_COLORSPACE_SMPTE170M,
.field = V4L2_FIELD_NONE,
.width = 640,