ARM: dts: r7s72100: Remove unnecessary clock-output-names properties
* Fixed rate and fixed factor clocks do not require an
clock-output-names property.
* Since 07705583e920fef6 ("clk: shmobile: div6: Make clock-output-names
optional") Renesas div6 clocks do not require a clock-output-names
property.
In the above cases there is only one clock output and its name is taken
from that of the clock node. Accordingly, remove the unnecessary
clock-output-names properties and as necessary update the node names.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index 89e46eb..e8e2a5d7 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -37,46 +37,41 @@
#size-cells = <1>;
/* External clocks */
- extal_clk: extal_clk {
+ extal_clk: extal {
#clock-cells = <0>;
compatible = "fixed-clock";
/* If clk present, value must be set by board */
clock-frequency = <0>;
- clock-output-names = "extal";
};
- usb_x1_clk: usb_x1_clk {
+ usb_x1_clk: usb_x1 {
#clock-cells = <0>;
compatible = "fixed-clock";
/* If clk present, value must be set by board */
clock-frequency = <0>;
- clock-output-names = "usb_x1";
};
/* Fixed factor clocks */
- b_clk: b_clk {
+ b_clk: b {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R7S72100_CLK_PLL>;
clock-mult = <1>;
clock-div = <3>;
- clock-output-names = "b";
};
- p1_clk: p1_clk {
+ p1_clk: p1 {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R7S72100_CLK_PLL>;
clock-mult = <1>;
clock-div = <6>;
- clock-output-names = "p1";
};
- p0_clk: p0_clk {
+ p0_clk: p0 {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R7S72100_CLK_PLL>;
clock-mult = <1>;
clock-div = <12>;
- clock-output-names = "p0";
};
/* Special CPG clocks */