| /* |
| * Elantech Touchpad driver (v6) |
| * |
| * Copyright (C) 2007-2009 Arjan Opmeer <arjan@opmeer.net> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published |
| * by the Free Software Foundation. |
| * |
| * Trademarks are the property of their respective owners. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/dmi.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/input.h> |
| #include <linux/input/mt.h> |
| #include <linux/serio.h> |
| #include <linux/libps2.h> |
| #include <asm/unaligned.h> |
| #include "psmouse.h" |
| #include "elantech.h" |
| |
| #define elantech_debug(fmt, ...) \ |
| do { \ |
| if (etd->debug) \ |
| psmouse_printk(KERN_DEBUG, psmouse, \ |
| fmt, ##__VA_ARGS__); \ |
| } while (0) |
| |
| /* |
| * Send a Synaptics style sliced query command |
| */ |
| static int synaptics_send_cmd(struct psmouse *psmouse, unsigned char c, |
| unsigned char *param) |
| { |
| if (psmouse_sliced_command(psmouse, c) || |
| ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_GETINFO)) { |
| psmouse_err(psmouse, "%s query 0x%02x failed.\n", __func__, c); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * V3 and later support this fast command |
| */ |
| static int elantech_send_cmd(struct psmouse *psmouse, unsigned char c, |
| unsigned char *param) |
| { |
| struct ps2dev *ps2dev = &psmouse->ps2dev; |
| |
| if (ps2_command(ps2dev, NULL, ETP_PS2_CUSTOM_COMMAND) || |
| ps2_command(ps2dev, NULL, c) || |
| ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) { |
| psmouse_err(psmouse, "%s query 0x%02x failed.\n", __func__, c); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * A retrying version of ps2_command |
| */ |
| static int elantech_ps2_command(struct psmouse *psmouse, |
| unsigned char *param, int command) |
| { |
| struct ps2dev *ps2dev = &psmouse->ps2dev; |
| struct elantech_data *etd = psmouse->private; |
| int rc; |
| int tries = ETP_PS2_COMMAND_TRIES; |
| |
| do { |
| rc = ps2_command(ps2dev, param, command); |
| if (rc == 0) |
| break; |
| tries--; |
| elantech_debug("retrying ps2 command 0x%02x (%d).\n", |
| command, tries); |
| msleep(ETP_PS2_COMMAND_DELAY); |
| } while (tries > 0); |
| |
| if (rc) |
| psmouse_err(psmouse, "ps2 command 0x%02x failed.\n", command); |
| |
| return rc; |
| } |
| |
| /* |
| * Send an Elantech style special command to read a value from a register |
| */ |
| static int elantech_read_reg(struct psmouse *psmouse, unsigned char reg, |
| unsigned char *val) |
| { |
| struct elantech_data *etd = psmouse->private; |
| unsigned char param[3]; |
| int rc = 0; |
| |
| if (reg < 0x07 || reg > 0x26) |
| return -1; |
| |
| if (reg > 0x11 && reg < 0x20) |
| return -1; |
| |
| switch (etd->hw_version) { |
| case 1: |
| if (psmouse_sliced_command(psmouse, ETP_REGISTER_READ) || |
| psmouse_sliced_command(psmouse, reg) || |
| ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_GETINFO)) { |
| rc = -1; |
| } |
| break; |
| |
| case 2: |
| if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || |
| elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READ) || |
| elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || |
| elantech_ps2_command(psmouse, NULL, reg) || |
| elantech_ps2_command(psmouse, param, PSMOUSE_CMD_GETINFO)) { |
| rc = -1; |
| } |
| break; |
| |
| case 3 ... 4: |
| if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || |
| elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) || |
| elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || |
| elantech_ps2_command(psmouse, NULL, reg) || |
| elantech_ps2_command(psmouse, param, PSMOUSE_CMD_GETINFO)) { |
| rc = -1; |
| } |
| break; |
| } |
| |
| if (rc) |
| psmouse_err(psmouse, "failed to read register 0x%02x.\n", reg); |
| else if (etd->hw_version != 4) |
| *val = param[0]; |
| else |
| *val = param[1]; |
| |
| return rc; |
| } |
| |
| /* |
| * Send an Elantech style special command to write a register with a value |
| */ |
| static int elantech_write_reg(struct psmouse *psmouse, unsigned char reg, |
| unsigned char val) |
| { |
| struct elantech_data *etd = psmouse->private; |
| int rc = 0; |
| |
| if (reg < 0x07 || reg > 0x26) |
| return -1; |
| |
| if (reg > 0x11 && reg < 0x20) |
| return -1; |
| |
| switch (etd->hw_version) { |
| case 1: |
| if (psmouse_sliced_command(psmouse, ETP_REGISTER_WRITE) || |
| psmouse_sliced_command(psmouse, reg) || |
| psmouse_sliced_command(psmouse, val) || |
| ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSCALE11)) { |
| rc = -1; |
| } |
| break; |
| |
| case 2: |
| if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || |
| elantech_ps2_command(psmouse, NULL, ETP_REGISTER_WRITE) || |
| elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || |
| elantech_ps2_command(psmouse, NULL, reg) || |
| elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || |
| elantech_ps2_command(psmouse, NULL, val) || |
| elantech_ps2_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11)) { |
| rc = -1; |
| } |
| break; |
| |
| case 3: |
| if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || |
| elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) || |
| elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || |
| elantech_ps2_command(psmouse, NULL, reg) || |
| elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || |
| elantech_ps2_command(psmouse, NULL, val) || |
| elantech_ps2_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11)) { |
| rc = -1; |
| } |
| break; |
| |
| case 4: |
| if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || |
| elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) || |
| elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || |
| elantech_ps2_command(psmouse, NULL, reg) || |
| elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || |
| elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) || |
| elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || |
| elantech_ps2_command(psmouse, NULL, val) || |
| elantech_ps2_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11)) { |
| rc = -1; |
| } |
| break; |
| } |
| |
| if (rc) |
| psmouse_err(psmouse, |
| "failed to write register 0x%02x with value 0x%02x.\n", |
| reg, val); |
| |
| return rc; |
| } |
| |
| /* |
| * Dump a complete mouse movement packet to the syslog |
| */ |
| static void elantech_packet_dump(struct psmouse *psmouse) |
| { |
| int i; |
| |
| psmouse_printk(KERN_DEBUG, psmouse, "PS/2 packet ["); |
| for (i = 0; i < psmouse->pktsize; i++) |
| printk("%s0x%02x ", i ? ", " : " ", psmouse->packet[i]); |
| printk("]\n"); |
| } |
| |
| /* |
| * Interpret complete data packets and report absolute mode input events for |
| * hardware version 1. (4 byte packets) |
| */ |
| static void elantech_report_absolute_v1(struct psmouse *psmouse) |
| { |
| struct input_dev *dev = psmouse->dev; |
| struct elantech_data *etd = psmouse->private; |
| unsigned char *packet = psmouse->packet; |
| int fingers; |
| |
| if (etd->fw_version < 0x020000) { |
| /* |
| * byte 0: D U p1 p2 1 p3 R L |
| * byte 1: f 0 th tw x9 x8 y9 y8 |
| */ |
| fingers = ((packet[1] & 0x80) >> 7) + |
| ((packet[1] & 0x30) >> 4); |
| } else { |
| /* |
| * byte 0: n1 n0 p2 p1 1 p3 R L |
| * byte 1: 0 0 0 0 x9 x8 y9 y8 |
| */ |
| fingers = (packet[0] & 0xc0) >> 6; |
| } |
| |
| if (etd->jumpy_cursor) { |
| if (fingers != 1) { |
| etd->single_finger_reports = 0; |
| } else if (etd->single_finger_reports < 2) { |
| /* Discard first 2 reports of one finger, bogus */ |
| etd->single_finger_reports++; |
| elantech_debug("discarding packet\n"); |
| return; |
| } |
| } |
| |
| input_report_key(dev, BTN_TOUCH, fingers != 0); |
| |
| /* |
| * byte 2: x7 x6 x5 x4 x3 x2 x1 x0 |
| * byte 3: y7 y6 y5 y4 y3 y2 y1 y0 |
| */ |
| if (fingers) { |
| input_report_abs(dev, ABS_X, |
| ((packet[1] & 0x0c) << 6) | packet[2]); |
| input_report_abs(dev, ABS_Y, |
| etd->y_max - (((packet[1] & 0x03) << 8) | packet[3])); |
| } |
| |
| input_report_key(dev, BTN_TOOL_FINGER, fingers == 1); |
| input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2); |
| input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3); |
| input_report_key(dev, BTN_LEFT, packet[0] & 0x01); |
| input_report_key(dev, BTN_RIGHT, packet[0] & 0x02); |
| |
| if (etd->fw_version < 0x020000 && |
| (etd->capabilities[0] & ETP_CAP_HAS_ROCKER)) { |
| /* rocker up */ |
| input_report_key(dev, BTN_FORWARD, packet[0] & 0x40); |
| /* rocker down */ |
| input_report_key(dev, BTN_BACK, packet[0] & 0x80); |
| } |
| |
| input_sync(dev); |
| } |
| |
| static void elantech_set_slot(struct input_dev *dev, int slot, bool active, |
| unsigned int x, unsigned int y) |
| { |
| input_mt_slot(dev, slot); |
| input_mt_report_slot_state(dev, MT_TOOL_FINGER, active); |
| if (active) { |
| input_report_abs(dev, ABS_MT_POSITION_X, x); |
| input_report_abs(dev, ABS_MT_POSITION_Y, y); |
| } |
| } |
| |
| /* x1 < x2 and y1 < y2 when two fingers, x = y = 0 when not pressed */ |
| static void elantech_report_semi_mt_data(struct input_dev *dev, |
| unsigned int num_fingers, |
| unsigned int x1, unsigned int y1, |
| unsigned int x2, unsigned int y2) |
| { |
| elantech_set_slot(dev, 0, num_fingers != 0, x1, y1); |
| elantech_set_slot(dev, 1, num_fingers == 2, x2, y2); |
| } |
| |
| /* |
| * Interpret complete data packets and report absolute mode input events for |
| * hardware version 2. (6 byte packets) |
| */ |
| static void elantech_report_absolute_v2(struct psmouse *psmouse) |
| { |
| struct elantech_data *etd = psmouse->private; |
| struct input_dev *dev = psmouse->dev; |
| unsigned char *packet = psmouse->packet; |
| unsigned int fingers, x1 = 0, y1 = 0, x2 = 0, y2 = 0; |
| unsigned int width = 0, pres = 0; |
| |
| /* byte 0: n1 n0 . . . . R L */ |
| fingers = (packet[0] & 0xc0) >> 6; |
| |
| switch (fingers) { |
| case 3: |
| /* |
| * Same as one finger, except report of more than 3 fingers: |
| * byte 3: n4 . w1 w0 . . . . |
| */ |
| if (packet[3] & 0x80) |
| fingers = 4; |
| /* pass through... */ |
| case 1: |
| /* |
| * byte 1: . . . . x11 x10 x9 x8 |
| * byte 2: x7 x6 x5 x4 x4 x2 x1 x0 |
| */ |
| x1 = ((packet[1] & 0x0f) << 8) | packet[2]; |
| /* |
| * byte 4: . . . . y11 y10 y9 y8 |
| * byte 5: y7 y6 y5 y4 y3 y2 y1 y0 |
| */ |
| y1 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]); |
| |
| pres = (packet[1] & 0xf0) | ((packet[4] & 0xf0) >> 4); |
| width = ((packet[0] & 0x30) >> 2) | ((packet[3] & 0x30) >> 4); |
| break; |
| |
| case 2: |
| /* |
| * The coordinate of each finger is reported separately |
| * with a lower resolution for two finger touches: |
| * byte 0: . . ay8 ax8 . . . . |
| * byte 1: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0 |
| */ |
| x1 = (((packet[0] & 0x10) << 4) | packet[1]) << 2; |
| /* byte 2: ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0 */ |
| y1 = etd->y_max - |
| ((((packet[0] & 0x20) << 3) | packet[2]) << 2); |
| /* |
| * byte 3: . . by8 bx8 . . . . |
| * byte 4: bx7 bx6 bx5 bx4 bx3 bx2 bx1 bx0 |
| */ |
| x2 = (((packet[3] & 0x10) << 4) | packet[4]) << 2; |
| /* byte 5: by7 by8 by5 by4 by3 by2 by1 by0 */ |
| y2 = etd->y_max - |
| ((((packet[3] & 0x20) << 3) | packet[5]) << 2); |
| |
| /* Unknown so just report sensible values */ |
| pres = 127; |
| width = 7; |
| break; |
| } |
| |
| input_report_key(dev, BTN_TOUCH, fingers != 0); |
| if (fingers != 0) { |
| input_report_abs(dev, ABS_X, x1); |
| input_report_abs(dev, ABS_Y, y1); |
| } |
| elantech_report_semi_mt_data(dev, fingers, x1, y1, x2, y2); |
| input_report_key(dev, BTN_TOOL_FINGER, fingers == 1); |
| input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2); |
| input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3); |
| input_report_key(dev, BTN_TOOL_QUADTAP, fingers == 4); |
| input_report_key(dev, BTN_LEFT, packet[0] & 0x01); |
| input_report_key(dev, BTN_RIGHT, packet[0] & 0x02); |
| if (etd->reports_pressure) { |
| input_report_abs(dev, ABS_PRESSURE, pres); |
| input_report_abs(dev, ABS_TOOL_WIDTH, width); |
| } |
| |
| input_sync(dev); |
| } |
| |
| static void elantech_report_trackpoint(struct psmouse *psmouse, |
| int packet_type) |
| { |
| /* |
| * byte 0: 0 0 sx sy 0 M R L |
| * byte 1:~sx 0 0 0 0 0 0 0 |
| * byte 2:~sy 0 0 0 0 0 0 0 |
| * byte 3: 0 0 ~sy ~sx 0 1 1 0 |
| * byte 4: x7 x6 x5 x4 x3 x2 x1 x0 |
| * byte 5: y7 y6 y5 y4 y3 y2 y1 y0 |
| * |
| * x and y are written in two's complement spread |
| * over 9 bits with sx/sy the relative top bit and |
| * x7..x0 and y7..y0 the lower bits. |
| * The sign of y is opposite to what the input driver |
| * expects for a relative movement |
| */ |
| |
| struct elantech_data *etd = psmouse->private; |
| struct input_dev *tp_dev = etd->tp_dev; |
| unsigned char *packet = psmouse->packet; |
| int x, y; |
| u32 t; |
| |
| if (dev_WARN_ONCE(&psmouse->ps2dev.serio->dev, |
| !tp_dev, |
| psmouse_fmt("Unexpected trackpoint message\n"))) { |
| if (etd->debug == 1) |
| elantech_packet_dump(psmouse); |
| return; |
| } |
| |
| t = get_unaligned_le32(&packet[0]); |
| |
| switch (t & ~7U) { |
| case 0x06000030U: |
| case 0x16008020U: |
| case 0x26800010U: |
| case 0x36808000U: |
| x = packet[4] - (int)((packet[1]^0x80) << 1); |
| y = (int)((packet[2]^0x80) << 1) - packet[5]; |
| |
| input_report_key(tp_dev, BTN_LEFT, packet[0] & 0x01); |
| input_report_key(tp_dev, BTN_RIGHT, packet[0] & 0x02); |
| input_report_key(tp_dev, BTN_MIDDLE, packet[0] & 0x04); |
| |
| input_report_rel(tp_dev, REL_X, x); |
| input_report_rel(tp_dev, REL_Y, y); |
| |
| input_sync(tp_dev); |
| |
| break; |
| |
| default: |
| /* Dump unexpected packet sequences if debug=1 (default) */ |
| if (etd->debug == 1) |
| elantech_packet_dump(psmouse); |
| |
| break; |
| } |
| } |
| |
| /* |
| * Interpret complete data packets and report absolute mode input events for |
| * hardware version 3. (12 byte packets for two fingers) |
| */ |
| static void elantech_report_absolute_v3(struct psmouse *psmouse, |
| int packet_type) |
| { |
| struct input_dev *dev = psmouse->dev; |
| struct elantech_data *etd = psmouse->private; |
| unsigned char *packet = psmouse->packet; |
| unsigned int fingers = 0, x1 = 0, y1 = 0, x2 = 0, y2 = 0; |
| unsigned int width = 0, pres = 0; |
| |
| /* byte 0: n1 n0 . . . . R L */ |
| fingers = (packet[0] & 0xc0) >> 6; |
| |
| switch (fingers) { |
| case 3: |
| case 1: |
| /* |
| * byte 1: . . . . x11 x10 x9 x8 |
| * byte 2: x7 x6 x5 x4 x4 x2 x1 x0 |
| */ |
| x1 = ((packet[1] & 0x0f) << 8) | packet[2]; |
| /* |
| * byte 4: . . . . y11 y10 y9 y8 |
| * byte 5: y7 y6 y5 y4 y3 y2 y1 y0 |
| */ |
| y1 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]); |
| break; |
| |
| case 2: |
| if (packet_type == PACKET_V3_HEAD) { |
| /* |
| * byte 1: . . . . ax11 ax10 ax9 ax8 |
| * byte 2: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0 |
| */ |
| etd->mt[0].x = ((packet[1] & 0x0f) << 8) | packet[2]; |
| /* |
| * byte 4: . . . . ay11 ay10 ay9 ay8 |
| * byte 5: ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0 |
| */ |
| etd->mt[0].y = etd->y_max - |
| (((packet[4] & 0x0f) << 8) | packet[5]); |
| /* |
| * wait for next packet |
| */ |
| return; |
| } |
| |
| /* packet_type == PACKET_V3_TAIL */ |
| x1 = etd->mt[0].x; |
| y1 = etd->mt[0].y; |
| x2 = ((packet[1] & 0x0f) << 8) | packet[2]; |
| y2 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]); |
| break; |
| } |
| |
| pres = (packet[1] & 0xf0) | ((packet[4] & 0xf0) >> 4); |
| width = ((packet[0] & 0x30) >> 2) | ((packet[3] & 0x30) >> 4); |
| |
| input_report_key(dev, BTN_TOUCH, fingers != 0); |
| if (fingers != 0) { |
| input_report_abs(dev, ABS_X, x1); |
| input_report_abs(dev, ABS_Y, y1); |
| } |
| elantech_report_semi_mt_data(dev, fingers, x1, y1, x2, y2); |
| input_report_key(dev, BTN_TOOL_FINGER, fingers == 1); |
| input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2); |
| input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3); |
| |
| /* For clickpads map both buttons to BTN_LEFT */ |
| if (etd->fw_version & 0x001000) { |
| input_report_key(dev, BTN_LEFT, packet[0] & 0x03); |
| } else { |
| input_report_key(dev, BTN_LEFT, packet[0] & 0x01); |
| input_report_key(dev, BTN_RIGHT, packet[0] & 0x02); |
| } |
| |
| input_report_abs(dev, ABS_PRESSURE, pres); |
| input_report_abs(dev, ABS_TOOL_WIDTH, width); |
| |
| input_sync(dev); |
| } |
| |
| static void elantech_input_sync_v4(struct psmouse *psmouse) |
| { |
| struct input_dev *dev = psmouse->dev; |
| struct elantech_data *etd = psmouse->private; |
| unsigned char *packet = psmouse->packet; |
| |
| /* For clickpads map both buttons to BTN_LEFT */ |
| if (etd->fw_version & 0x001000) { |
| input_report_key(dev, BTN_LEFT, packet[0] & 0x03); |
| } else { |
| input_report_key(dev, BTN_LEFT, packet[0] & 0x01); |
| input_report_key(dev, BTN_RIGHT, packet[0] & 0x02); |
| } |
| |
| input_mt_report_pointer_emulation(dev, true); |
| input_sync(dev); |
| } |
| |
| static void process_packet_status_v4(struct psmouse *psmouse) |
| { |
| struct input_dev *dev = psmouse->dev; |
| unsigned char *packet = psmouse->packet; |
| unsigned fingers; |
| int i; |
| |
| /* notify finger state change */ |
| fingers = packet[1] & 0x1f; |
| for (i = 0; i < ETP_MAX_FINGERS; i++) { |
| if ((fingers & (1 << i)) == 0) { |
| input_mt_slot(dev, i); |
| input_mt_report_slot_state(dev, MT_TOOL_FINGER, false); |
| } |
| } |
| |
| elantech_input_sync_v4(psmouse); |
| } |
| |
| static void process_packet_head_v4(struct psmouse *psmouse) |
| { |
| struct input_dev *dev = psmouse->dev; |
| struct elantech_data *etd = psmouse->private; |
| unsigned char *packet = psmouse->packet; |
| int id = ((packet[3] & 0xe0) >> 5) - 1; |
| int pres, traces; |
| |
| if (id < 0) |
| return; |
| |
| etd->mt[id].x = ((packet[1] & 0x0f) << 8) | packet[2]; |
| etd->mt[id].y = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]); |
| pres = (packet[1] & 0xf0) | ((packet[4] & 0xf0) >> 4); |
| traces = (packet[0] & 0xf0) >> 4; |
| |
| input_mt_slot(dev, id); |
| input_mt_report_slot_state(dev, MT_TOOL_FINGER, true); |
| |
| input_report_abs(dev, ABS_MT_POSITION_X, etd->mt[id].x); |
| input_report_abs(dev, ABS_MT_POSITION_Y, etd->mt[id].y); |
| input_report_abs(dev, ABS_MT_PRESSURE, pres); |
| input_report_abs(dev, ABS_MT_TOUCH_MAJOR, traces * etd->width); |
| /* report this for backwards compatibility */ |
| input_report_abs(dev, ABS_TOOL_WIDTH, traces); |
| |
| elantech_input_sync_v4(psmouse); |
| } |
| |
| static void process_packet_motion_v4(struct psmouse *psmouse) |
| { |
| struct input_dev *dev = psmouse->dev; |
| struct elantech_data *etd = psmouse->private; |
| unsigned char *packet = psmouse->packet; |
| int weight, delta_x1 = 0, delta_y1 = 0, delta_x2 = 0, delta_y2 = 0; |
| int id, sid; |
| |
| id = ((packet[0] & 0xe0) >> 5) - 1; |
| if (id < 0) |
| return; |
| |
| sid = ((packet[3] & 0xe0) >> 5) - 1; |
| weight = (packet[0] & 0x10) ? ETP_WEIGHT_VALUE : 1; |
| /* |
| * Motion packets give us the delta of x, y values of specific fingers, |
| * but in two's complement. Let the compiler do the conversion for us. |
| * Also _enlarge_ the numbers to int, in case of overflow. |
| */ |
| delta_x1 = (signed char)packet[1]; |
| delta_y1 = (signed char)packet[2]; |
| delta_x2 = (signed char)packet[4]; |
| delta_y2 = (signed char)packet[5]; |
| |
| etd->mt[id].x += delta_x1 * weight; |
| etd->mt[id].y -= delta_y1 * weight; |
| input_mt_slot(dev, id); |
| input_report_abs(dev, ABS_MT_POSITION_X, etd->mt[id].x); |
| input_report_abs(dev, ABS_MT_POSITION_Y, etd->mt[id].y); |
| |
| if (sid >= 0) { |
| etd->mt[sid].x += delta_x2 * weight; |
| etd->mt[sid].y -= delta_y2 * weight; |
| input_mt_slot(dev, sid); |
| input_report_abs(dev, ABS_MT_POSITION_X, etd->mt[sid].x); |
| input_report_abs(dev, ABS_MT_POSITION_Y, etd->mt[sid].y); |
| } |
| |
| elantech_input_sync_v4(psmouse); |
| } |
| |
| static void elantech_report_absolute_v4(struct psmouse *psmouse, |
| int packet_type) |
| { |
| switch (packet_type) { |
| case PACKET_V4_STATUS: |
| process_packet_status_v4(psmouse); |
| break; |
| |
| case PACKET_V4_HEAD: |
| process_packet_head_v4(psmouse); |
| break; |
| |
| case PACKET_V4_MOTION: |
| process_packet_motion_v4(psmouse); |
| break; |
| |
| case PACKET_UNKNOWN: |
| default: |
| /* impossible to get here */ |
| break; |
| } |
| } |
| |
| static int elantech_packet_check_v1(struct psmouse *psmouse) |
| { |
| struct elantech_data *etd = psmouse->private; |
| unsigned char *packet = psmouse->packet; |
| unsigned char p1, p2, p3; |
| |
| /* Parity bits are placed differently */ |
| if (etd->fw_version < 0x020000) { |
| /* byte 0: D U p1 p2 1 p3 R L */ |
| p1 = (packet[0] & 0x20) >> 5; |
| p2 = (packet[0] & 0x10) >> 4; |
| } else { |
| /* byte 0: n1 n0 p2 p1 1 p3 R L */ |
| p1 = (packet[0] & 0x10) >> 4; |
| p2 = (packet[0] & 0x20) >> 5; |
| } |
| |
| p3 = (packet[0] & 0x04) >> 2; |
| |
| return etd->parity[packet[1]] == p1 && |
| etd->parity[packet[2]] == p2 && |
| etd->parity[packet[3]] == p3; |
| } |
| |
| static int elantech_debounce_check_v2(struct psmouse *psmouse) |
| { |
| /* |
| * When we encounter packet that matches this exactly, it means the |
| * hardware is in debounce status. Just ignore the whole packet. |
| */ |
| const u8 debounce_packet[] = { 0x84, 0xff, 0xff, 0x02, 0xff, 0xff }; |
| unsigned char *packet = psmouse->packet; |
| |
| return !memcmp(packet, debounce_packet, sizeof(debounce_packet)); |
| } |
| |
| static int elantech_packet_check_v2(struct psmouse *psmouse) |
| { |
| struct elantech_data *etd = psmouse->private; |
| unsigned char *packet = psmouse->packet; |
| |
| /* |
| * V2 hardware has two flavors. Older ones that do not report pressure, |
| * and newer ones that reports pressure and width. With newer ones, all |
| * packets (1, 2, 3 finger touch) have the same constant bits. With |
| * older ones, 1/3 finger touch packets and 2 finger touch packets |
| * have different constant bits. |
| * With all three cases, if the constant bits are not exactly what I |
| * expected, I consider them invalid. |
| */ |
| if (etd->reports_pressure) |
| return (packet[0] & 0x0c) == 0x04 && |
| (packet[3] & 0x0f) == 0x02; |
| |
| if ((packet[0] & 0xc0) == 0x80) |
| return (packet[0] & 0x0c) == 0x0c && |
| (packet[3] & 0x0e) == 0x08; |
| |
| return (packet[0] & 0x3c) == 0x3c && |
| (packet[1] & 0xf0) == 0x00 && |
| (packet[3] & 0x3e) == 0x38 && |
| (packet[4] & 0xf0) == 0x00; |
| } |
| |
| /* |
| * We check the constant bits to determine what packet type we get, |
| * so packet checking is mandatory for v3 and later hardware. |
| */ |
| static int elantech_packet_check_v3(struct psmouse *psmouse) |
| { |
| struct elantech_data *etd = psmouse->private; |
| const u8 debounce_packet[] = { 0xc4, 0xff, 0xff, 0x02, 0xff, 0xff }; |
| unsigned char *packet = psmouse->packet; |
| |
| /* |
| * check debounce first, it has the same signature in byte 0 |
| * and byte 3 as PACKET_V3_HEAD. |
| */ |
| if (!memcmp(packet, debounce_packet, sizeof(debounce_packet))) |
| return PACKET_DEBOUNCE; |
| |
| /* |
| * If the hardware flag 'crc_enabled' is set the packets have |
| * different signatures. |
| */ |
| if (etd->crc_enabled) { |
| if ((packet[3] & 0x09) == 0x08) |
| return PACKET_V3_HEAD; |
| |
| if ((packet[3] & 0x09) == 0x09) |
| return PACKET_V3_TAIL; |
| } else { |
| if ((packet[0] & 0x0c) == 0x04 && (packet[3] & 0xcf) == 0x02) |
| return PACKET_V3_HEAD; |
| |
| if ((packet[0] & 0x0c) == 0x0c && (packet[3] & 0xce) == 0x0c) |
| return PACKET_V3_TAIL; |
| if ((packet[3] & 0x0f) == 0x06) |
| return PACKET_TRACKPOINT; |
| } |
| |
| return PACKET_UNKNOWN; |
| } |
| |
| static int elantech_packet_check_v4(struct psmouse *psmouse) |
| { |
| struct elantech_data *etd = psmouse->private; |
| unsigned char *packet = psmouse->packet; |
| unsigned char packet_type = packet[3] & 0x03; |
| bool sanity_check; |
| |
| /* |
| * Sanity check based on the constant bits of a packet. |
| * The constant bits change depending on the value of |
| * the hardware flag 'crc_enabled' but are the same for |
| * every packet, regardless of the type. |
| */ |
| if (etd->crc_enabled) |
| sanity_check = ((packet[3] & 0x08) == 0x00); |
| else |
| sanity_check = ((packet[0] & 0x0c) == 0x04 && |
| (packet[3] & 0x1c) == 0x10); |
| |
| if (!sanity_check) |
| return PACKET_UNKNOWN; |
| |
| switch (packet_type) { |
| case 0: |
| return PACKET_V4_STATUS; |
| |
| case 1: |
| return PACKET_V4_HEAD; |
| |
| case 2: |
| return PACKET_V4_MOTION; |
| } |
| |
| return PACKET_UNKNOWN; |
| } |
| |
| /* |
| * Process byte stream from mouse and handle complete packets |
| */ |
| static psmouse_ret_t elantech_process_byte(struct psmouse *psmouse) |
| { |
| struct elantech_data *etd = psmouse->private; |
| int packet_type; |
| |
| if (psmouse->pktcnt < psmouse->pktsize) |
| return PSMOUSE_GOOD_DATA; |
| |
| if (etd->debug > 1) |
| elantech_packet_dump(psmouse); |
| |
| switch (etd->hw_version) { |
| case 1: |
| if (etd->paritycheck && !elantech_packet_check_v1(psmouse)) |
| return PSMOUSE_BAD_DATA; |
| |
| elantech_report_absolute_v1(psmouse); |
| break; |
| |
| case 2: |
| /* ignore debounce */ |
| if (elantech_debounce_check_v2(psmouse)) |
| return PSMOUSE_FULL_PACKET; |
| |
| if (etd->paritycheck && !elantech_packet_check_v2(psmouse)) |
| return PSMOUSE_BAD_DATA; |
| |
| elantech_report_absolute_v2(psmouse); |
| break; |
| |
| case 3: |
| packet_type = elantech_packet_check_v3(psmouse); |
| switch (packet_type) { |
| case PACKET_UNKNOWN: |
| return PSMOUSE_BAD_DATA; |
| |
| case PACKET_DEBOUNCE: |
| /* ignore debounce */ |
| break; |
| |
| case PACKET_TRACKPOINT: |
| elantech_report_trackpoint(psmouse, packet_type); |
| break; |
| |
| default: |
| elantech_report_absolute_v3(psmouse, packet_type); |
| break; |
| } |
| |
| break; |
| |
| case 4: |
| packet_type = elantech_packet_check_v4(psmouse); |
| if (packet_type == PACKET_UNKNOWN) |
| return PSMOUSE_BAD_DATA; |
| |
| elantech_report_absolute_v4(psmouse, packet_type); |
| break; |
| } |
| |
| return PSMOUSE_FULL_PACKET; |
| } |
| |
| /* |
| * Put the touchpad into absolute mode |
| */ |
| static int elantech_set_absolute_mode(struct psmouse *psmouse) |
| { |
| struct elantech_data *etd = psmouse->private; |
| unsigned char val; |
| int tries = ETP_READ_BACK_TRIES; |
| int rc = 0; |
| |
| switch (etd->hw_version) { |
| case 1: |
| etd->reg_10 = 0x16; |
| etd->reg_11 = 0x8f; |
| if (elantech_write_reg(psmouse, 0x10, etd->reg_10) || |
| elantech_write_reg(psmouse, 0x11, etd->reg_11)) { |
| rc = -1; |
| } |
| break; |
| |
| case 2: |
| /* Windows driver values */ |
| etd->reg_10 = 0x54; |
| etd->reg_11 = 0x88; /* 0x8a */ |
| etd->reg_21 = 0x60; /* 0x00 */ |
| if (elantech_write_reg(psmouse, 0x10, etd->reg_10) || |
| elantech_write_reg(psmouse, 0x11, etd->reg_11) || |
| elantech_write_reg(psmouse, 0x21, etd->reg_21)) { |
| rc = -1; |
| } |
| break; |
| |
| case 3: |
| if (etd->set_hw_resolution) |
| etd->reg_10 = 0x0b; |
| else |
| etd->reg_10 = 0x01; |
| |
| if (elantech_write_reg(psmouse, 0x10, etd->reg_10)) |
| rc = -1; |
| |
| break; |
| |
| case 4: |
| etd->reg_07 = 0x01; |
| if (elantech_write_reg(psmouse, 0x07, etd->reg_07)) |
| rc = -1; |
| |
| goto skip_readback_reg_10; /* v4 has no reg 0x10 to read */ |
| } |
| |
| if (rc == 0) { |
| /* |
| * Read back reg 0x10. For hardware version 1 we must make |
| * sure the absolute mode bit is set. For hardware version 2 |
| * the touchpad is probably initializing and not ready until |
| * we read back the value we just wrote. |
| */ |
| do { |
| rc = elantech_read_reg(psmouse, 0x10, &val); |
| if (rc == 0) |
| break; |
| tries--; |
| elantech_debug("retrying read (%d).\n", tries); |
| msleep(ETP_READ_BACK_DELAY); |
| } while (tries > 0); |
| |
| if (rc) { |
| psmouse_err(psmouse, |
| "failed to read back register 0x10.\n"); |
| } else if (etd->hw_version == 1 && |
| !(val & ETP_R10_ABSOLUTE_MODE)) { |
| psmouse_err(psmouse, |
| "touchpad refuses to switch to absolute mode.\n"); |
| rc = -1; |
| } |
| } |
| |
| skip_readback_reg_10: |
| if (rc) |
| psmouse_err(psmouse, "failed to initialise registers.\n"); |
| |
| return rc; |
| } |
| |
| static int elantech_set_range(struct psmouse *psmouse, |
| unsigned int *x_min, unsigned int *y_min, |
| unsigned int *x_max, unsigned int *y_max, |
| unsigned int *width) |
| { |
| struct elantech_data *etd = psmouse->private; |
| unsigned char param[3]; |
| unsigned char traces; |
| |
| switch (etd->hw_version) { |
| case 1: |
| *x_min = ETP_XMIN_V1; |
| *y_min = ETP_YMIN_V1; |
| *x_max = ETP_XMAX_V1; |
| *y_max = ETP_YMAX_V1; |
| break; |
| |
| case 2: |
| if (etd->fw_version == 0x020800 || |
| etd->fw_version == 0x020b00 || |
| etd->fw_version == 0x020030) { |
| *x_min = ETP_XMIN_V2; |
| *y_min = ETP_YMIN_V2; |
| *x_max = ETP_XMAX_V2; |
| *y_max = ETP_YMAX_V2; |
| } else { |
| int i; |
| int fixed_dpi; |
| |
| i = (etd->fw_version > 0x020800 && |
| etd->fw_version < 0x020900) ? 1 : 2; |
| |
| if (etd->send_cmd(psmouse, ETP_FW_ID_QUERY, param)) |
| return -1; |
| |
| fixed_dpi = param[1] & 0x10; |
| |
| if (((etd->fw_version >> 16) == 0x14) && fixed_dpi) { |
| if (etd->send_cmd(psmouse, ETP_SAMPLE_QUERY, param)) |
| return -1; |
| |
| *x_max = (etd->capabilities[1] - i) * param[1] / 2; |
| *y_max = (etd->capabilities[2] - i) * param[2] / 2; |
| } else if (etd->fw_version == 0x040216) { |
| *x_max = 819; |
| *y_max = 405; |
| } else if (etd->fw_version == 0x040219 || etd->fw_version == 0x040215) { |
| *x_max = 900; |
| *y_max = 500; |
| } else { |
| *x_max = (etd->capabilities[1] - i) * 64; |
| *y_max = (etd->capabilities[2] - i) * 64; |
| } |
| } |
| break; |
| |
| case 3: |
| if (etd->send_cmd(psmouse, ETP_FW_ID_QUERY, param)) |
| return -1; |
| |
| *x_max = (0x0f & param[0]) << 8 | param[1]; |
| *y_max = (0xf0 & param[0]) << 4 | param[2]; |
| break; |
| |
| case 4: |
| if (etd->send_cmd(psmouse, ETP_FW_ID_QUERY, param)) |
| return -1; |
| |
| *x_max = (0x0f & param[0]) << 8 | param[1]; |
| *y_max = (0xf0 & param[0]) << 4 | param[2]; |
| traces = etd->capabilities[1]; |
| if ((traces < 2) || (traces > *x_max)) |
| return -1; |
| |
| *width = *x_max / (traces - 1); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * (value from firmware) * 10 + 790 = dpi |
| * we also have to convert dpi to dots/mm (*10/254 to avoid floating point) |
| */ |
| static unsigned int elantech_convert_res(unsigned int val) |
| { |
| return (val * 10 + 790) * 10 / 254; |
| } |
| |
| static int elantech_get_resolution_v4(struct psmouse *psmouse, |
| unsigned int *x_res, |
| unsigned int *y_res) |
| { |
| unsigned char param[3]; |
| |
| if (elantech_send_cmd(psmouse, ETP_RESOLUTION_QUERY, param)) |
| return -1; |
| |
| *x_res = elantech_convert_res(param[1] & 0x0f); |
| *y_res = elantech_convert_res((param[1] & 0xf0) >> 4); |
| |
| return 0; |
| } |
| |
| /* |
| * Advertise INPUT_PROP_BUTTONPAD for clickpads. The testing of bit 12 in |
| * fw_version for this is based on the following fw_version & caps table: |
| * |
| * Laptop-model: fw_version: caps: buttons: |
| * Acer S3 0x461f00 10, 13, 0e clickpad |
| * Acer S7-392 0x581f01 50, 17, 0d clickpad |
| * Acer V5-131 0x461f02 01, 16, 0c clickpad |
| * Acer V5-551 0x461f00 ? clickpad |
| * Asus K53SV 0x450f01 78, 15, 0c 2 hw buttons |
| * Asus G46VW 0x460f02 00, 18, 0c 2 hw buttons |
| * Asus G750JX 0x360f00 00, 16, 0c 2 hw buttons |
| * Asus UX31 0x361f00 20, 15, 0e clickpad |
| * Asus UX32VD 0x361f02 00, 15, 0e clickpad |
| * Avatar AVIU-145A2 0x361f00 ? clickpad |
| * Fujitsu H730 0x570f00 c0, 14, 0c 3 hw buttons (**) |
| * Gigabyte U2442 0x450f01 58, 17, 0c 2 hw buttons |
| * Lenovo L430 0x350f02 b9, 15, 0c 2 hw buttons (*) |
| * Lenovo L530 0x350f02 b9, 15, 0c 2 hw buttons (*) |
| * Samsung NF210 0x150b00 78, 14, 0a 2 hw buttons |
| * Samsung NP770Z5E 0x575f01 10, 15, 0f clickpad |
| * Samsung NP700Z5B 0x361f06 21, 15, 0f clickpad |
| * Samsung NP900X3E-A02 0x575f03 ? clickpad |
| * Samsung NP-QX410 0x851b00 19, 14, 0c clickpad |
| * Samsung RC512 0x450f00 08, 15, 0c 2 hw buttons |
| * Samsung RF710 0x450f00 ? 2 hw buttons |
| * System76 Pangolin 0x250f01 ? 2 hw buttons |
| * (*) + 3 trackpoint buttons |
| * (**) + 0 trackpoint buttons |
| * Note: Lenovo L430 and Lenovo L430 have the same fw_version/caps |
| */ |
| static void elantech_set_buttonpad_prop(struct psmouse *psmouse) |
| { |
| struct input_dev *dev = psmouse->dev; |
| struct elantech_data *etd = psmouse->private; |
| |
| if (etd->fw_version & 0x001000) { |
| __set_bit(INPUT_PROP_BUTTONPAD, dev->propbit); |
| __clear_bit(BTN_RIGHT, dev->keybit); |
| } |
| } |
| |
| /* |
| * Set the appropriate event bits for the input subsystem |
| */ |
| static int elantech_set_input_params(struct psmouse *psmouse) |
| { |
| struct input_dev *dev = psmouse->dev; |
| struct elantech_data *etd = psmouse->private; |
| unsigned int x_min = 0, y_min = 0, x_max = 0, y_max = 0, width = 0; |
| unsigned int x_res = 0, y_res = 0; |
| |
| if (elantech_set_range(psmouse, &x_min, &y_min, &x_max, &y_max, &width)) |
| return -1; |
| |
| __set_bit(INPUT_PROP_POINTER, dev->propbit); |
| __set_bit(EV_KEY, dev->evbit); |
| __set_bit(EV_ABS, dev->evbit); |
| __clear_bit(EV_REL, dev->evbit); |
| |
| __set_bit(BTN_LEFT, dev->keybit); |
| __set_bit(BTN_RIGHT, dev->keybit); |
| |
| __set_bit(BTN_TOUCH, dev->keybit); |
| __set_bit(BTN_TOOL_FINGER, dev->keybit); |
| __set_bit(BTN_TOOL_DOUBLETAP, dev->keybit); |
| __set_bit(BTN_TOOL_TRIPLETAP, dev->keybit); |
| |
| switch (etd->hw_version) { |
| case 1: |
| /* Rocker button */ |
| if (etd->fw_version < 0x020000 && |
| (etd->capabilities[0] & ETP_CAP_HAS_ROCKER)) { |
| __set_bit(BTN_FORWARD, dev->keybit); |
| __set_bit(BTN_BACK, dev->keybit); |
| } |
| input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0); |
| input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0); |
| break; |
| |
| case 2: |
| __set_bit(BTN_TOOL_QUADTAP, dev->keybit); |
| __set_bit(INPUT_PROP_SEMI_MT, dev->propbit); |
| /* fall through */ |
| case 3: |
| if (etd->hw_version == 3) |
| elantech_set_buttonpad_prop(psmouse); |
| input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0); |
| input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0); |
| if (etd->reports_pressure) { |
| input_set_abs_params(dev, ABS_PRESSURE, ETP_PMIN_V2, |
| ETP_PMAX_V2, 0, 0); |
| input_set_abs_params(dev, ABS_TOOL_WIDTH, ETP_WMIN_V2, |
| ETP_WMAX_V2, 0, 0); |
| } |
| input_mt_init_slots(dev, 2, 0); |
| input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0); |
| input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0); |
| break; |
| |
| case 4: |
| if (elantech_get_resolution_v4(psmouse, &x_res, &y_res)) { |
| /* |
| * if query failed, print a warning and leave the values |
| * zero to resemble synaptics.c behavior. |
| */ |
| psmouse_warn(psmouse, "couldn't query resolution data.\n"); |
| } |
| elantech_set_buttonpad_prop(psmouse); |
| __set_bit(BTN_TOOL_QUADTAP, dev->keybit); |
| /* For X to recognize me as touchpad. */ |
| input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0); |
| input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0); |
| input_abs_set_res(dev, ABS_X, x_res); |
| input_abs_set_res(dev, ABS_Y, y_res); |
| /* |
| * range of pressure and width is the same as v2, |
| * report ABS_PRESSURE, ABS_TOOL_WIDTH for compatibility. |
| */ |
| input_set_abs_params(dev, ABS_PRESSURE, ETP_PMIN_V2, |
| ETP_PMAX_V2, 0, 0); |
| input_set_abs_params(dev, ABS_TOOL_WIDTH, ETP_WMIN_V2, |
| ETP_WMAX_V2, 0, 0); |
| /* Multitouch capable pad, up to 5 fingers. */ |
| input_mt_init_slots(dev, ETP_MAX_FINGERS, 0); |
| input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0); |
| input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0); |
| input_abs_set_res(dev, ABS_MT_POSITION_X, x_res); |
| input_abs_set_res(dev, ABS_MT_POSITION_Y, y_res); |
| input_set_abs_params(dev, ABS_MT_PRESSURE, ETP_PMIN_V2, |
| ETP_PMAX_V2, 0, 0); |
| /* |
| * The firmware reports how many trace lines the finger spans, |
| * convert to surface unit as Protocol-B requires. |
| */ |
| input_set_abs_params(dev, ABS_MT_TOUCH_MAJOR, 0, |
| ETP_WMAX_V2 * width, 0, 0); |
| break; |
| } |
| |
| etd->y_max = y_max; |
| etd->width = width; |
| |
| return 0; |
| } |
| |
| struct elantech_attr_data { |
| size_t field_offset; |
| unsigned char reg; |
| }; |
| |
| /* |
| * Display a register value by reading a sysfs entry |
| */ |
| static ssize_t elantech_show_int_attr(struct psmouse *psmouse, void *data, |
| char *buf) |
| { |
| struct elantech_data *etd = psmouse->private; |
| struct elantech_attr_data *attr = data; |
| unsigned char *reg = (unsigned char *) etd + attr->field_offset; |
| int rc = 0; |
| |
| if (attr->reg) |
| rc = elantech_read_reg(psmouse, attr->reg, reg); |
| |
| return sprintf(buf, "0x%02x\n", (attr->reg && rc) ? -1 : *reg); |
| } |
| |
| /* |
| * Write a register value by writing a sysfs entry |
| */ |
| static ssize_t elantech_set_int_attr(struct psmouse *psmouse, |
| void *data, const char *buf, size_t count) |
| { |
| struct elantech_data *etd = psmouse->private; |
| struct elantech_attr_data *attr = data; |
| unsigned char *reg = (unsigned char *) etd + attr->field_offset; |
| unsigned char value; |
| int err; |
| |
| err = kstrtou8(buf, 16, &value); |
| if (err) |
| return err; |
| |
| /* Do we need to preserve some bits for version 2 hardware too? */ |
| if (etd->hw_version == 1) { |
| if (attr->reg == 0x10) |
| /* Force absolute mode always on */ |
| value |= ETP_R10_ABSOLUTE_MODE; |
| else if (attr->reg == 0x11) |
| /* Force 4 byte mode always on */ |
| value |= ETP_R11_4_BYTE_MODE; |
| } |
| |
| if (!attr->reg || elantech_write_reg(psmouse, attr->reg, value) == 0) |
| *reg = value; |
| |
| return count; |
| } |
| |
| #define ELANTECH_INT_ATTR(_name, _register) \ |
| static struct elantech_attr_data elantech_attr_##_name = { \ |
| .field_offset = offsetof(struct elantech_data, _name), \ |
| .reg = _register, \ |
| }; \ |
| PSMOUSE_DEFINE_ATTR(_name, S_IWUSR | S_IRUGO, \ |
| &elantech_attr_##_name, \ |
| elantech_show_int_attr, \ |
| elantech_set_int_attr) |
| |
| ELANTECH_INT_ATTR(reg_07, 0x07); |
| ELANTECH_INT_ATTR(reg_10, 0x10); |
| ELANTECH_INT_ATTR(reg_11, 0x11); |
| ELANTECH_INT_ATTR(reg_20, 0x20); |
| ELANTECH_INT_ATTR(reg_21, 0x21); |
| ELANTECH_INT_ATTR(reg_22, 0x22); |
| ELANTECH_INT_ATTR(reg_23, 0x23); |
| ELANTECH_INT_ATTR(reg_24, 0x24); |
| ELANTECH_INT_ATTR(reg_25, 0x25); |
| ELANTECH_INT_ATTR(reg_26, 0x26); |
| ELANTECH_INT_ATTR(debug, 0); |
| ELANTECH_INT_ATTR(paritycheck, 0); |
| |
| static struct attribute *elantech_attrs[] = { |
| &psmouse_attr_reg_07.dattr.attr, |
| &psmouse_attr_reg_10.dattr.attr, |
| &psmouse_attr_reg_11.dattr.attr, |
| &psmouse_attr_reg_20.dattr.attr, |
| &psmouse_attr_reg_21.dattr.attr, |
| &psmouse_attr_reg_22.dattr.attr, |
| &psmouse_attr_reg_23.dattr.attr, |
| &psmouse_attr_reg_24.dattr.attr, |
| &psmouse_attr_reg_25.dattr.attr, |
| &psmouse_attr_reg_26.dattr.attr, |
| &psmouse_attr_debug.dattr.attr, |
| &psmouse_attr_paritycheck.dattr.attr, |
| NULL |
| }; |
| |
| static struct attribute_group elantech_attr_group = { |
| .attrs = elantech_attrs, |
| }; |
| |
| static bool elantech_is_signature_valid(const unsigned char *param) |
| { |
| static const unsigned char rates[] = { 200, 100, 80, 60, 40, 20, 10 }; |
| int i; |
| |
| if (param[0] == 0) |
| return false; |
| |
| if (param[1] == 0) |
| return true; |
| |
| for (i = 0; i < ARRAY_SIZE(rates); i++) |
| if (param[2] == rates[i]) |
| return false; |
| |
| return true; |
| } |
| |
| /* |
| * Use magic knock to detect Elantech touchpad |
| */ |
| int elantech_detect(struct psmouse *psmouse, bool set_properties) |
| { |
| struct ps2dev *ps2dev = &psmouse->ps2dev; |
| unsigned char param[3]; |
| |
| ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS); |
| |
| if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || |
| ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || |
| ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || |
| ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || |
| ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) { |
| psmouse_dbg(psmouse, "sending Elantech magic knock failed.\n"); |
| return -1; |
| } |
| |
| /* |
| * Report this in case there are Elantech models that use a different |
| * set of magic numbers |
| */ |
| if (param[0] != 0x3c || param[1] != 0x03 || |
| (param[2] != 0xc8 && param[2] != 0x00)) { |
| psmouse_dbg(psmouse, |
| "unexpected magic knock result 0x%02x, 0x%02x, 0x%02x.\n", |
| param[0], param[1], param[2]); |
| return -1; |
| } |
| |
| /* |
| * Query touchpad's firmware version and see if it reports known |
| * value to avoid mis-detection. Logitech mice are known to respond |
| * to Elantech magic knock and there might be more. |
| */ |
| if (synaptics_send_cmd(psmouse, ETP_FW_VERSION_QUERY, param)) { |
| psmouse_dbg(psmouse, "failed to query firmware version.\n"); |
| return -1; |
| } |
| |
| psmouse_dbg(psmouse, |
| "Elantech version query result 0x%02x, 0x%02x, 0x%02x.\n", |
| param[0], param[1], param[2]); |
| |
| if (!elantech_is_signature_valid(param)) { |
| psmouse_dbg(psmouse, |
| "Probably not a real Elantech touchpad. Aborting.\n"); |
| return -1; |
| } |
| |
| if (set_properties) { |
| psmouse->vendor = "Elantech"; |
| psmouse->name = "Touchpad"; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Clean up sysfs entries when disconnecting |
| */ |
| static void elantech_disconnect(struct psmouse *psmouse) |
| { |
| struct elantech_data *etd = psmouse->private; |
| |
| if (etd->tp_dev) |
| input_unregister_device(etd->tp_dev); |
| sysfs_remove_group(&psmouse->ps2dev.serio->dev.kobj, |
| &elantech_attr_group); |
| kfree(psmouse->private); |
| psmouse->private = NULL; |
| } |
| |
| /* |
| * Put the touchpad back into absolute mode when reconnecting |
| */ |
| static int elantech_reconnect(struct psmouse *psmouse) |
| { |
| psmouse_reset(psmouse); |
| |
| if (elantech_detect(psmouse, 0)) |
| return -1; |
| |
| if (elantech_set_absolute_mode(psmouse)) { |
| psmouse_err(psmouse, |
| "failed to put touchpad back into absolute mode.\n"); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Some hw_version 3 models go into error state when we try to set |
| * bit 3 and/or bit 1 of r10. |
| */ |
| static const struct dmi_system_id no_hw_res_dmi_table[] = { |
| #if defined(CONFIG_DMI) && defined(CONFIG_X86) |
| { |
| /* Gigabyte U2442 */ |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "U2442"), |
| }, |
| }, |
| #endif |
| { } |
| }; |
| |
| /* |
| * determine hardware version and set some properties according to it. |
| */ |
| static int elantech_set_properties(struct elantech_data *etd) |
| { |
| /* This represents the version of IC body. */ |
| int ver = (etd->fw_version & 0x0f0000) >> 16; |
| |
| /* Early version of Elan touchpads doesn't obey the rule. */ |
| if (etd->fw_version < 0x020030 || etd->fw_version == 0x020600) |
| etd->hw_version = 1; |
| else { |
| switch (ver) { |
| case 2: |
| case 4: |
| etd->hw_version = 2; |
| break; |
| case 5: |
| etd->hw_version = 3; |
| break; |
| case 6: |
| case 7: |
| case 8: |
| case 9: |
| etd->hw_version = 4; |
| break; |
| default: |
| return -1; |
| } |
| } |
| |
| /* decide which send_cmd we're gonna use early */ |
| etd->send_cmd = etd->hw_version >= 3 ? elantech_send_cmd : |
| synaptics_send_cmd; |
| |
| /* Turn on packet checking by default */ |
| etd->paritycheck = 1; |
| |
| /* |
| * This firmware suffers from misreporting coordinates when |
| * a touch action starts causing the mouse cursor or scrolled page |
| * to jump. Enable a workaround. |
| */ |
| etd->jumpy_cursor = |
| (etd->fw_version == 0x020022 || etd->fw_version == 0x020600); |
| |
| if (etd->hw_version > 1) { |
| /* For now show extra debug information */ |
| etd->debug = 1; |
| |
| if (etd->fw_version >= 0x020800) |
| etd->reports_pressure = true; |
| } |
| |
| /* |
| * The signatures of v3 and v4 packets change depending on the |
| * value of this hardware flag. |
| */ |
| etd->crc_enabled = ((etd->fw_version & 0x4000) == 0x4000); |
| |
| /* Enable real hardware resolution on hw_version 3 ? */ |
| etd->set_hw_resolution = !dmi_check_system(no_hw_res_dmi_table); |
| |
| return 0; |
| } |
| |
| /* |
| * Initialize the touchpad and create sysfs entries |
| */ |
| int elantech_init(struct psmouse *psmouse) |
| { |
| struct elantech_data *etd; |
| int i; |
| int error = -EINVAL; |
| unsigned char param[3]; |
| struct input_dev *tp_dev; |
| |
| psmouse->private = etd = kzalloc(sizeof(struct elantech_data), GFP_KERNEL); |
| if (!etd) |
| return -ENOMEM; |
| |
| psmouse_reset(psmouse); |
| |
| etd->parity[0] = 1; |
| for (i = 1; i < 256; i++) |
| etd->parity[i] = etd->parity[i & (i - 1)] ^ 1; |
| |
| /* |
| * Do the version query again so we can store the result |
| */ |
| if (synaptics_send_cmd(psmouse, ETP_FW_VERSION_QUERY, param)) { |
| psmouse_err(psmouse, "failed to query firmware version.\n"); |
| goto init_fail; |
| } |
| etd->fw_version = (param[0] << 16) | (param[1] << 8) | param[2]; |
| |
| if (elantech_set_properties(etd)) { |
| psmouse_err(psmouse, "unknown hardware version, aborting...\n"); |
| goto init_fail; |
| } |
| psmouse_info(psmouse, |
| "assuming hardware version %d (with firmware version 0x%02x%02x%02x)\n", |
| etd->hw_version, param[0], param[1], param[2]); |
| |
| if (etd->send_cmd(psmouse, ETP_CAPABILITIES_QUERY, |
| etd->capabilities)) { |
| psmouse_err(psmouse, "failed to query capabilities.\n"); |
| goto init_fail; |
| } |
| psmouse_info(psmouse, |
| "Synaptics capabilities query result 0x%02x, 0x%02x, 0x%02x.\n", |
| etd->capabilities[0], etd->capabilities[1], |
| etd->capabilities[2]); |
| |
| if (elantech_set_absolute_mode(psmouse)) { |
| psmouse_err(psmouse, |
| "failed to put touchpad into absolute mode.\n"); |
| goto init_fail; |
| } |
| |
| if (elantech_set_input_params(psmouse)) { |
| psmouse_err(psmouse, "failed to query touchpad range.\n"); |
| goto init_fail; |
| } |
| |
| error = sysfs_create_group(&psmouse->ps2dev.serio->dev.kobj, |
| &elantech_attr_group); |
| if (error) { |
| psmouse_err(psmouse, |
| "failed to create sysfs attributes, error: %d.\n", |
| error); |
| goto init_fail; |
| } |
| |
| /* The MSB indicates the presence of the trackpoint */ |
| if ((etd->capabilities[0] & 0x80) == 0x80) { |
| tp_dev = input_allocate_device(); |
| |
| if (!tp_dev) { |
| error = -ENOMEM; |
| goto init_fail_tp_alloc; |
| } |
| |
| etd->tp_dev = tp_dev; |
| snprintf(etd->tp_phys, sizeof(etd->tp_phys), "%s/input1", |
| psmouse->ps2dev.serio->phys); |
| tp_dev->phys = etd->tp_phys; |
| tp_dev->name = "Elantech PS/2 TrackPoint"; |
| tp_dev->id.bustype = BUS_I8042; |
| tp_dev->id.vendor = 0x0002; |
| tp_dev->id.product = PSMOUSE_ELANTECH; |
| tp_dev->id.version = 0x0000; |
| tp_dev->dev.parent = &psmouse->ps2dev.serio->dev; |
| tp_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL); |
| tp_dev->relbit[BIT_WORD(REL_X)] = |
| BIT_MASK(REL_X) | BIT_MASK(REL_Y); |
| tp_dev->keybit[BIT_WORD(BTN_LEFT)] = |
| BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_MIDDLE) | |
| BIT_MASK(BTN_RIGHT); |
| error = input_register_device(etd->tp_dev); |
| if (error < 0) |
| goto init_fail_tp_reg; |
| } |
| |
| psmouse->protocol_handler = elantech_process_byte; |
| psmouse->disconnect = elantech_disconnect; |
| psmouse->reconnect = elantech_reconnect; |
| psmouse->pktsize = etd->hw_version > 1 ? 6 : 4; |
| |
| return 0; |
| init_fail_tp_reg: |
| input_free_device(tp_dev); |
| init_fail_tp_alloc: |
| sysfs_remove_group(&psmouse->ps2dev.serio->dev.kobj, |
| &elantech_attr_group); |
| init_fail: |
| psmouse_reset(psmouse); |
| kfree(etd); |
| return error; |
| } |