| /* |
| * Copyright (c) 2013 Linaro Ltd. |
| * Copyright (c) 2013 Hisilicon Limited. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/mmc/host.h> |
| #include <linux/module.h> |
| #include <linux/of_address.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/consumer.h> |
| |
| #include "dw_mmc.h" |
| #include "dw_mmc-pltfm.h" |
| |
| /* |
| * hi6220 sd only support io voltage 1.8v and 3v |
| * Also need config AO_SCTRL_SEL18 accordingly |
| */ |
| #define AO_SCTRL_SEL18 BIT(10) |
| #define AO_SCTRL_CTRL3 0x40C |
| |
| struct k3_priv { |
| struct regmap *reg; |
| }; |
| |
| static unsigned long dw_mci_hi6220_caps[] = { |
| MMC_CAP_CMD23, |
| MMC_CAP_CMD23, |
| 0 |
| }; |
| |
| static void dw_mci_k3_set_ios(struct dw_mci *host, struct mmc_ios *ios) |
| { |
| int ret; |
| |
| ret = clk_set_rate(host->ciu_clk, ios->clock); |
| if (ret) |
| dev_warn(host->dev, "failed to set rate %uHz\n", ios->clock); |
| |
| host->bus_hz = clk_get_rate(host->ciu_clk); |
| } |
| |
| static const struct dw_mci_drv_data k3_drv_data = { |
| .set_ios = dw_mci_k3_set_ios, |
| }; |
| |
| static int dw_mci_hi6220_parse_dt(struct dw_mci *host) |
| { |
| struct k3_priv *priv; |
| |
| priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| priv->reg = syscon_regmap_lookup_by_phandle(host->dev->of_node, |
| "hisilicon,peripheral-syscon"); |
| if (IS_ERR(priv->reg)) |
| priv->reg = NULL; |
| |
| host->priv = priv; |
| return 0; |
| } |
| |
| static int dw_mci_hi6220_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios) |
| { |
| struct dw_mci_slot *slot = mmc_priv(mmc); |
| struct k3_priv *priv; |
| struct dw_mci *host; |
| int min_uv, max_uv; |
| int ret; |
| |
| host = slot->host; |
| priv = host->priv; |
| |
| if (!priv || !priv->reg) |
| return 0; |
| |
| if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) { |
| ret = regmap_update_bits(priv->reg, AO_SCTRL_CTRL3, |
| AO_SCTRL_SEL18, 0); |
| min_uv = 3000000; |
| max_uv = 3000000; |
| } else if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180) { |
| ret = regmap_update_bits(priv->reg, AO_SCTRL_CTRL3, |
| AO_SCTRL_SEL18, AO_SCTRL_SEL18); |
| min_uv = 1800000; |
| max_uv = 1800000; |
| } else { |
| dev_dbg(host->dev, "voltage not supported\n"); |
| return -EINVAL; |
| } |
| |
| if (ret) { |
| dev_dbg(host->dev, "switch voltage failed\n"); |
| return ret; |
| } |
| |
| if (IS_ERR_OR_NULL(mmc->supply.vqmmc)) |
| return 0; |
| |
| ret = regulator_set_voltage(mmc->supply.vqmmc, min_uv, max_uv); |
| if (ret) { |
| dev_dbg(host->dev, "Regulator set error %d: %d - %d\n", |
| ret, min_uv, max_uv); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void dw_mci_hi6220_set_ios(struct dw_mci *host, struct mmc_ios *ios) |
| { |
| int ret; |
| unsigned int clock; |
| |
| clock = (ios->clock <= 25000000) ? 25000000 : ios->clock; |
| |
| ret = clk_set_rate(host->biu_clk, clock); |
| if (ret) |
| dev_warn(host->dev, "failed to set rate %uHz\n", clock); |
| |
| host->bus_hz = clk_get_rate(host->biu_clk); |
| } |
| |
| static int dw_mci_hi6220_execute_tuning(struct dw_mci_slot *slot, u32 opcode) |
| { |
| return 0; |
| } |
| |
| static const struct dw_mci_drv_data hi6220_data = { |
| .caps = dw_mci_hi6220_caps, |
| .switch_voltage = dw_mci_hi6220_switch_voltage, |
| .set_ios = dw_mci_hi6220_set_ios, |
| .parse_dt = dw_mci_hi6220_parse_dt, |
| .execute_tuning = dw_mci_hi6220_execute_tuning, |
| }; |
| |
| static const struct of_device_id dw_mci_k3_match[] = { |
| { .compatible = "hisilicon,hi4511-dw-mshc", .data = &k3_drv_data, }, |
| { .compatible = "hisilicon,hi6220-dw-mshc", .data = &hi6220_data, }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, dw_mci_k3_match); |
| |
| static int dw_mci_k3_probe(struct platform_device *pdev) |
| { |
| const struct dw_mci_drv_data *drv_data; |
| const struct of_device_id *match; |
| |
| match = of_match_node(dw_mci_k3_match, pdev->dev.of_node); |
| drv_data = match->data; |
| |
| return dw_mci_pltfm_register(pdev, drv_data); |
| } |
| |
| static const struct dev_pm_ops dw_mci_k3_dev_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, |
| pm_runtime_force_resume) |
| SET_RUNTIME_PM_OPS(dw_mci_runtime_suspend, |
| dw_mci_runtime_resume, |
| NULL) |
| }; |
| |
| static struct platform_driver dw_mci_k3_pltfm_driver = { |
| .probe = dw_mci_k3_probe, |
| .remove = dw_mci_pltfm_remove, |
| .driver = { |
| .name = "dwmmc_k3", |
| .of_match_table = dw_mci_k3_match, |
| .pm = &dw_mci_k3_dev_pm_ops, |
| }, |
| }; |
| |
| module_platform_driver(dw_mci_k3_pltfm_driver); |
| |
| MODULE_DESCRIPTION("K3 Specific DW-MSHC Driver Extension"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:dwmmc_k3"); |