drivers/mmc/host/sdhci-of-at91.c - kernel/msm-4.19 - Gitiles

 /*
  * Atmel SDMMC controller driver.
  *
  * Copyright (C) 2015 Atmel,
  *		 2015 Ludovic Desroches <ludovic.desroches@atmel.com>
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
  * may be copied, distributed, and modified under those terms.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */

 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/slot-gpio.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/pm.h>
 #include <linux/pm_runtime.h>

 #include "sdhci-pltfm.h"

 #define SDMMC_MC1R	0x204
 #define		SDMMC_MC1R_DDR		BIT(3)
 #define SDMMC_CACR	0x230
 #define		SDMMC_CACR_CAPWREN	BIT(0)
 #define		SDMMC_CACR_KEY		(0x46 << 8)

 #define SDHCI_AT91_PRESET_COMMON_CONF	0x400 /* drv type B, programmable clock mode */

 struct sdhci_at91_priv {
 	struct clk *hclock;
 	struct clk *gck;
 	struct clk *mainck;
 };

 static void sdhci_at91_set_clock(struct sdhci_host *host, unsigned int clock)
 {
 	u16 clk;
 	unsigned long timeout;

 	host->mmc->actual_clock = 0;

 	/*
 	 * There is no requirement to disable the internal clock before
 	 * changing the SD clock configuration. Moreover, disabling the
 	 * internal clock, changing the configuration and re-enabling the
 	 * internal clock causes some bugs. It can prevent to get the internal
 	 * clock stable flag ready and an unexpected switch to the base clock
 	 * when using presets.
 	 */
 	clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
 	clk &= SDHCI_CLOCK_INT_EN;
 	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);

 	if (clock == 0)
 		return;

 	clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock);

 	clk |= SDHCI_CLOCK_INT_EN;
 	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);

 	/* Wait max 20 ms */
 	timeout = 20;
 	while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
 		& SDHCI_CLOCK_INT_STABLE)) {
 		if (timeout == 0) {
 			pr_err("%s: Internal clock never stabilised.\n",
 			       mmc_hostname(host->mmc));
 			return;
 		}
 		timeout--;
 		mdelay(1);
 	}

 	clk |= SDHCI_CLOCK_CARD_EN;
 	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
 }

 /*
  * In this specific implementation of the SDHCI controller, the power register
  * needs to have a valid voltage set even when the power supply is managed by
  * an external regulator.
  */
 static void sdhci_at91_set_power(struct sdhci_host *host, unsigned char mode,
 		     unsigned short vdd)
 {
 	if (!IS_ERR(host->mmc->supply.vmmc)) {
 		struct mmc_host *mmc = host->mmc;

 		mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
 	}
 	sdhci_set_power_noreg(host, mode, vdd);
 }

 void sdhci_at91_set_uhs_signaling(struct sdhci_host *host, unsigned int timing)
 {
 	if (timing == MMC_TIMING_MMC_DDR52)
 		sdhci_writeb(host, SDMMC_MC1R_DDR, SDMMC_MC1R);
 	sdhci_set_uhs_signaling(host, timing);
 }

 static const struct sdhci_ops sdhci_at91_sama5d2_ops = {
 	.set_clock		= sdhci_at91_set_clock,
 	.set_bus_width		= sdhci_set_bus_width,
 	.reset			= sdhci_reset,
 	.set_uhs_signaling	= sdhci_at91_set_uhs_signaling,
 	.set_power		= sdhci_at91_set_power,
 };

 static const struct sdhci_pltfm_data soc_data_sama5d2 = {
 	.ops = &sdhci_at91_sama5d2_ops,
 };

 static const struct of_device_id sdhci_at91_dt_match[] = {
 	{ .compatible = "atmel,sama5d2-sdhci", .data = &soc_data_sama5d2 },
 	{}
 };
 MODULE_DEVICE_TABLE(of, sdhci_at91_dt_match);

 #ifdef CONFIG_PM
 static int sdhci_at91_runtime_suspend(struct device *dev)
 {
 	struct sdhci_host *host = dev_get_drvdata(dev);
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host);
 	int ret;

 	ret = sdhci_runtime_suspend_host(host);

 	if (host->tuning_mode != SDHCI_TUNING_MODE_3)
 		mmc_retune_needed(host->mmc);

 	clk_disable_unprepare(priv->gck);
 	clk_disable_unprepare(priv->hclock);
 	clk_disable_unprepare(priv->mainck);

 	return ret;
 }

 static int sdhci_at91_runtime_resume(struct device *dev)
 {
 	struct sdhci_host *host = dev_get_drvdata(dev);
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host);
 	int ret;

 	ret = clk_prepare_enable(priv->mainck);
 	if (ret) {
 		dev_err(dev, "can't enable mainck\n");
 		return ret;
 	}

 	ret = clk_prepare_enable(priv->hclock);
 	if (ret) {
 		dev_err(dev, "can't enable hclock\n");
 		return ret;
 	}

 	ret = clk_prepare_enable(priv->gck);
 	if (ret) {
 		dev_err(dev, "can't enable gck\n");
 		return ret;
 	}

 	return sdhci_runtime_resume_host(host);
 }
 #endif /* CONFIG_PM */

 static const struct dev_pm_ops sdhci_at91_dev_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
 				pm_runtime_force_resume)
 	SET_RUNTIME_PM_OPS(sdhci_at91_runtime_suspend,
 			   sdhci_at91_runtime_resume,
 			   NULL)
 };

 static int sdhci_at91_probe(struct platform_device *pdev)
 {
 	const struct of_device_id	*match;
 	const struct sdhci_pltfm_data	*soc_data;
 	struct sdhci_host		*host;
 	struct sdhci_pltfm_host		*pltfm_host;
 	struct sdhci_at91_priv		*priv;
 	unsigned int			caps0, caps1;
 	unsigned int			clk_base, clk_mul;
 	unsigned int			gck_rate, real_gck_rate;
 	int				ret;
 	unsigned int			preset_div;

 	match = of_match_device(sdhci_at91_dt_match, &pdev->dev);
 	if (!match)
 		return -EINVAL;
 	soc_data = match->data;

 	host = sdhci_pltfm_init(pdev, soc_data, sizeof(*priv));
 	if (IS_ERR(host))
 		return PTR_ERR(host);

 	pltfm_host = sdhci_priv(host);
 	priv = sdhci_pltfm_priv(pltfm_host);

 	priv->mainck = devm_clk_get(&pdev->dev, "baseclk");
 	if (IS_ERR(priv->mainck)) {
 		dev_err(&pdev->dev, "failed to get baseclk\n");
 		return PTR_ERR(priv->mainck);
 	}

 	priv->hclock = devm_clk_get(&pdev->dev, "hclock");
 	if (IS_ERR(priv->hclock)) {
 		dev_err(&pdev->dev, "failed to get hclock\n");
 		return PTR_ERR(priv->hclock);
 	}

 	priv->gck = devm_clk_get(&pdev->dev, "multclk");
 	if (IS_ERR(priv->gck)) {
 		dev_err(&pdev->dev, "failed to get multclk\n");
 		return PTR_ERR(priv->gck);
 	}

 	/*
 	 * The mult clock is provided by as a generated clock by the PMC
 	 * controller. In order to set the rate of gck, we have to get the
 	 * base clock rate and the clock mult from capabilities.
 	 */
 	clk_prepare_enable(priv->hclock);
 	caps0 = readl(host->ioaddr + SDHCI_CAPABILITIES);
 	caps1 = readl(host->ioaddr + SDHCI_CAPABILITIES_1);
 	clk_base = (caps0 & SDHCI_CLOCK_V3_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT;
 	clk_mul = (caps1 & SDHCI_CLOCK_MUL_MASK) >> SDHCI_CLOCK_MUL_SHIFT;
 	gck_rate = clk_base * 1000000 * (clk_mul + 1);
 	ret = clk_set_rate(priv->gck, gck_rate);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to set gck");
 		goto hclock_disable_unprepare;
 	}
 	/*
 	 * We need to check if we have the requested rate for gck because in
 	 * some cases this rate could be not supported. If it happens, the rate
 	 * is the closest one gck can provide. We have to update the value
 	 * of clk mul.
 	 */
 	real_gck_rate = clk_get_rate(priv->gck);
 	if (real_gck_rate != gck_rate) {
 		clk_mul = real_gck_rate / (clk_base * 1000000) - 1;
 		caps1 &= (~SDHCI_CLOCK_MUL_MASK);
 		caps1 |= ((clk_mul << SDHCI_CLOCK_MUL_SHIFT) & SDHCI_CLOCK_MUL_MASK);
 		/* Set capabilities in r/w mode. */
 		writel(SDMMC_CACR_KEY | SDMMC_CACR_CAPWREN, host->ioaddr + SDMMC_CACR);
 		writel(caps1, host->ioaddr + SDHCI_CAPABILITIES_1);
 		/* Set capabilities in ro mode. */
 		writel(0, host->ioaddr + SDMMC_CACR);
 		dev_info(&pdev->dev, "update clk mul to %u as gck rate is %u Hz\n",
 			 clk_mul, real_gck_rate);
 	}

 	/*
 	 * We have to set preset values because it depends on the clk_mul
 	 * value. Moreover, SDR104 is supported in a degraded mode since the
 	 * maximum sd clock value is 120 MHz instead of 208 MHz. For that
 	 * reason, we need to use presets to support SDR104.
 	 */
 	preset_div = DIV_ROUND_UP(real_gck_rate, 24000000) - 1;
 	writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
 	       host->ioaddr + SDHCI_PRESET_FOR_SDR12);
 	preset_div = DIV_ROUND_UP(real_gck_rate, 50000000) - 1;
 	writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
 	       host->ioaddr + SDHCI_PRESET_FOR_SDR25);
 	preset_div = DIV_ROUND_UP(real_gck_rate, 100000000) - 1;
 	writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
 	       host->ioaddr + SDHCI_PRESET_FOR_SDR50);
 	preset_div = DIV_ROUND_UP(real_gck_rate, 120000000) - 1;
 	writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
 	       host->ioaddr + SDHCI_PRESET_FOR_SDR104);
 	preset_div = DIV_ROUND_UP(real_gck_rate, 50000000) - 1;
 	writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
 	       host->ioaddr + SDHCI_PRESET_FOR_DDR50);

 	clk_prepare_enable(priv->mainck);
 	clk_prepare_enable(priv->gck);

 	ret = mmc_of_parse(host->mmc);
 	if (ret)
 		goto clocks_disable_unprepare;

 	sdhci_get_of_property(pdev);

 	pm_runtime_get_noresume(&pdev->dev);
 	pm_runtime_set_active(&pdev->dev);
 	pm_runtime_enable(&pdev->dev);
 	pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
 	pm_runtime_use_autosuspend(&pdev->dev);

 	ret = sdhci_add_host(host);
 	if (ret)
 		goto pm_runtime_disable;

 	/*
 	 * When calling sdhci_runtime_suspend_host(), the sdhci layer makes
 	 * the assumption that all the clocks of the controller are disabled.
 	 * It means we can't get irq from it when it is runtime suspended.
 	 * For that reason, it is not planned to wake-up on a card detect irq
 	 * from the controller.
 	 * If we want to use runtime PM and to be able to wake-up on card
 	 * insertion, we have to use a GPIO for the card detection or we can
 	 * use polling. Be aware that using polling will resume/suspend the
 	 * controller between each attempt.
 	 * Disable SDHCI_QUIRK_BROKEN_CARD_DETECTION to be sure nobody tries
 	 * to enable polling via device tree with broken-cd property.
 	 */
 	if (mmc_card_is_removable(host->mmc) &&
 	    mmc_gpio_get_cd(host->mmc) < 0) {
 		host->mmc->caps |= MMC_CAP_NEEDS_POLL;
 		host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
 	}

 	pm_runtime_put_autosuspend(&pdev->dev);

 	return 0;

 pm_runtime_disable:
 	pm_runtime_disable(&pdev->dev);
 	pm_runtime_set_suspended(&pdev->dev);
 	pm_runtime_put_noidle(&pdev->dev);
 clocks_disable_unprepare:
 	clk_disable_unprepare(priv->gck);
 	clk_disable_unprepare(priv->mainck);
 hclock_disable_unprepare:
 	clk_disable_unprepare(priv->hclock);
 	sdhci_pltfm_free(pdev);
 	return ret;
 }

 static int sdhci_at91_remove(struct platform_device *pdev)
 {
 	struct sdhci_host	*host = platform_get_drvdata(pdev);
 	struct sdhci_pltfm_host	*pltfm_host = sdhci_priv(host);
 	struct sdhci_at91_priv	*priv = sdhci_pltfm_priv(pltfm_host);
 	struct clk *gck = priv->gck;
 	struct clk *hclock = priv->hclock;
 	struct clk *mainck = priv->mainck;

 	pm_runtime_get_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 	pm_runtime_put_noidle(&pdev->dev);

 	sdhci_pltfm_unregister(pdev);

 	clk_disable_unprepare(gck);
 	clk_disable_unprepare(hclock);
 	clk_disable_unprepare(mainck);

 	return 0;
 }

 static struct platform_driver sdhci_at91_driver = {
 	.driver		= {
 		.name	= "sdhci-at91",
 		.of_match_table = sdhci_at91_dt_match,
 		.pm	= &sdhci_at91_dev_pm_ops,
 	},
 	.probe		= sdhci_at91_probe,
 	.remove		= sdhci_at91_remove,
 };

 module_platform_driver(sdhci_at91_driver);

 MODULE_DESCRIPTION("SDHCI driver for at91");
 MODULE_AUTHOR("Ludovic Desroches <ludovic.desroches@atmel.com>");
 MODULE_LICENSE("GPL v2");
	/*
	* Atmel SDMMC controller driver.
	*
	* Copyright (C) 2015 Atmel,
	* 2015 Ludovic Desroches <ludovic.desroches@atmel.com>
	*
	* This software is licensed under the terms of the GNU General Public
	* License version 2, as published by the Free Software Foundation, and
	* may be copied, distributed, and modified under those terms.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*/

	#include <linux/clk.h>
	#include <linux/delay.h>
	#include <linux/err.h>
	#include <linux/io.h>
	#include <linux/kernel.h>
	#include <linux/mmc/host.h>
	#include <linux/mmc/slot-gpio.h>
	#include <linux/module.h>
	#include <linux/of.h>
	#include <linux/of_device.h>
	#include <linux/pm.h>
	#include <linux/pm_runtime.h>

	#include "sdhci-pltfm.h"

	#define SDMMC_MC1R 0x204
	#define SDMMC_MC1R_DDR BIT(3)
	#define SDMMC_CACR 0x230
	#define SDMMC_CACR_CAPWREN BIT(0)
	#define SDMMC_CACR_KEY (0x46 << 8)

	#define SDHCI_AT91_PRESET_COMMON_CONF 0x400 /* drv type B, programmable clock mode */

	struct sdhci_at91_priv {
	struct clk *hclock;
	struct clk *gck;
	struct clk *mainck;
	};

	static void sdhci_at91_set_clock(struct sdhci_host *host, unsigned int clock)
	{
	u16 clk;
	unsigned long timeout;

	host->mmc->actual_clock = 0;

	/*
	* There is no requirement to disable the internal clock before
	* changing the SD clock configuration. Moreover, disabling the
	* internal clock, changing the configuration and re-enabling the
	* internal clock causes some bugs. It can prevent to get the internal
	* clock stable flag ready and an unexpected switch to the base clock
	* when using presets.
	*/
	clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
	clk &= SDHCI_CLOCK_INT_EN;
	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);

	if (clock == 0)
	return;

	clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock);

	clk \|= SDHCI_CLOCK_INT_EN;
	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);

	/* Wait max 20 ms */
	timeout = 20;
	while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
	& SDHCI_CLOCK_INT_STABLE)) {
	if (timeout == 0) {
	pr_err("%s: Internal clock never stabilised.\n",
	mmc_hostname(host->mmc));
	return;
	}
	timeout--;
	mdelay(1);
	}

	clk \|= SDHCI_CLOCK_CARD_EN;
	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
	}

	/*
	* In this specific implementation of the SDHCI controller, the power register
	* needs to have a valid voltage set even when the power supply is managed by
	* an external regulator.
	*/
	static void sdhci_at91_set_power(struct sdhci_host *host, unsigned char mode,
	unsigned short vdd)
	{
	if (!IS_ERR(host->mmc->supply.vmmc)) {
	struct mmc_host *mmc = host->mmc;

	mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
	}
	sdhci_set_power_noreg(host, mode, vdd);
	}

	void sdhci_at91_set_uhs_signaling(struct sdhci_host *host, unsigned int timing)
	{
	if (timing == MMC_TIMING_MMC_DDR52)
	sdhci_writeb(host, SDMMC_MC1R_DDR, SDMMC_MC1R);
	sdhci_set_uhs_signaling(host, timing);
	}

	static const struct sdhci_ops sdhci_at91_sama5d2_ops = {
	.set_clock = sdhci_at91_set_clock,
	.set_bus_width = sdhci_set_bus_width,
	.reset = sdhci_reset,
	.set_uhs_signaling = sdhci_at91_set_uhs_signaling,
	.set_power = sdhci_at91_set_power,
	};

	static const struct sdhci_pltfm_data soc_data_sama5d2 = {
	.ops = &sdhci_at91_sama5d2_ops,
	};

	static const struct of_device_id sdhci_at91_dt_match[] = {
	{ .compatible = "atmel,sama5d2-sdhci", .data = &soc_data_sama5d2 },
	{}
	};
	MODULE_DEVICE_TABLE(of, sdhci_at91_dt_match);

	#ifdef CONFIG_PM
	static int sdhci_at91_runtime_suspend(struct device *dev)
	{
	struct sdhci_host *host = dev_get_drvdata(dev);
	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
	struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host);
	int ret;

	ret = sdhci_runtime_suspend_host(host);

	if (host->tuning_mode != SDHCI_TUNING_MODE_3)
	mmc_retune_needed(host->mmc);

	clk_disable_unprepare(priv->gck);
	clk_disable_unprepare(priv->hclock);
	clk_disable_unprepare(priv->mainck);

	return ret;
	}

	static int sdhci_at91_runtime_resume(struct device *dev)
	{
	struct sdhci_host *host = dev_get_drvdata(dev);
	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
	struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host);
	int ret;

	ret = clk_prepare_enable(priv->mainck);
	if (ret) {
	dev_err(dev, "can't enable mainck\n");
	return ret;
	}

	ret = clk_prepare_enable(priv->hclock);
	if (ret) {
	dev_err(dev, "can't enable hclock\n");
	return ret;
	}

	ret = clk_prepare_enable(priv->gck);
	if (ret) {
	dev_err(dev, "can't enable gck\n");
	return ret;
	}

	return sdhci_runtime_resume_host(host);
	}
	#endif /* CONFIG_PM */

	static const struct dev_pm_ops sdhci_at91_dev_pm_ops = {
	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
	pm_runtime_force_resume)
	SET_RUNTIME_PM_OPS(sdhci_at91_runtime_suspend,
	sdhci_at91_runtime_resume,
	NULL)
	};

	static int sdhci_at91_probe(struct platform_device *pdev)
	{
	const struct of_device_id *match;
	const struct sdhci_pltfm_data *soc_data;
	struct sdhci_host *host;
	struct sdhci_pltfm_host *pltfm_host;
	struct sdhci_at91_priv *priv;
	unsigned int caps0, caps1;
	unsigned int clk_base, clk_mul;
	unsigned int gck_rate, real_gck_rate;
	int ret;
	unsigned int preset_div;

	match = of_match_device(sdhci_at91_dt_match, &pdev->dev);
	if (!match)
	return -EINVAL;
	soc_data = match->data;

	host = sdhci_pltfm_init(pdev, soc_data, sizeof(*priv));
	if (IS_ERR(host))
	return PTR_ERR(host);

	pltfm_host = sdhci_priv(host);
	priv = sdhci_pltfm_priv(pltfm_host);

	priv->mainck = devm_clk_get(&pdev->dev, "baseclk");
	if (IS_ERR(priv->mainck)) {
	dev_err(&pdev->dev, "failed to get baseclk\n");
	return PTR_ERR(priv->mainck);
	}

	priv->hclock = devm_clk_get(&pdev->dev, "hclock");
	if (IS_ERR(priv->hclock)) {
	dev_err(&pdev->dev, "failed to get hclock\n");
	return PTR_ERR(priv->hclock);
	}

	priv->gck = devm_clk_get(&pdev->dev, "multclk");
	if (IS_ERR(priv->gck)) {
	dev_err(&pdev->dev, "failed to get multclk\n");
	return PTR_ERR(priv->gck);
	}

	/*
	* The mult clock is provided by as a generated clock by the PMC
	* controller. In order to set the rate of gck, we have to get the
	* base clock rate and the clock mult from capabilities.
	*/
	clk_prepare_enable(priv->hclock);
	caps0 = readl(host->ioaddr + SDHCI_CAPABILITIES);
	caps1 = readl(host->ioaddr + SDHCI_CAPABILITIES_1);
	clk_base = (caps0 & SDHCI_CLOCK_V3_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT;
	clk_mul = (caps1 & SDHCI_CLOCK_MUL_MASK) >> SDHCI_CLOCK_MUL_SHIFT;
	gck_rate = clk_base * 1000000 * (clk_mul + 1);
	ret = clk_set_rate(priv->gck, gck_rate);
	if (ret < 0) {
	dev_err(&pdev->dev, "failed to set gck");
	goto hclock_disable_unprepare;
	}
	/*
	* We need to check if we have the requested rate for gck because in
	* some cases this rate could be not supported. If it happens, the rate
	* is the closest one gck can provide. We have to update the value
	* of clk mul.
	*/
	real_gck_rate = clk_get_rate(priv->gck);
	if (real_gck_rate != gck_rate) {
	clk_mul = real_gck_rate / (clk_base * 1000000) - 1;
	caps1 &= (~SDHCI_CLOCK_MUL_MASK);
	caps1 \|= ((clk_mul << SDHCI_CLOCK_MUL_SHIFT) & SDHCI_CLOCK_MUL_MASK);
	/* Set capabilities in r/w mode. */
	writel(SDMMC_CACR_KEY \| SDMMC_CACR_CAPWREN, host->ioaddr + SDMMC_CACR);
	writel(caps1, host->ioaddr + SDHCI_CAPABILITIES_1);
	/* Set capabilities in ro mode. */
	writel(0, host->ioaddr + SDMMC_CACR);
	dev_info(&pdev->dev, "update clk mul to %u as gck rate is %u Hz\n",
	clk_mul, real_gck_rate);
	}

	/*
	* We have to set preset values because it depends on the clk_mul
	* value. Moreover, SDR104 is supported in a degraded mode since the
	* maximum sd clock value is 120 MHz instead of 208 MHz. For that
	* reason, we need to use presets to support SDR104.
	*/
	preset_div = DIV_ROUND_UP(real_gck_rate, 24000000) - 1;
	writew(SDHCI_AT91_PRESET_COMMON_CONF \| preset_div,
	host->ioaddr + SDHCI_PRESET_FOR_SDR12);
	preset_div = DIV_ROUND_UP(real_gck_rate, 50000000) - 1;
	writew(SDHCI_AT91_PRESET_COMMON_CONF \| preset_div,
	host->ioaddr + SDHCI_PRESET_FOR_SDR25);
	preset_div = DIV_ROUND_UP(real_gck_rate, 100000000) - 1;
	writew(SDHCI_AT91_PRESET_COMMON_CONF \| preset_div,
	host->ioaddr + SDHCI_PRESET_FOR_SDR50);
	preset_div = DIV_ROUND_UP(real_gck_rate, 120000000) - 1;
	writew(SDHCI_AT91_PRESET_COMMON_CONF \| preset_div,
	host->ioaddr + SDHCI_PRESET_FOR_SDR104);
	preset_div = DIV_ROUND_UP(real_gck_rate, 50000000) - 1;
	writew(SDHCI_AT91_PRESET_COMMON_CONF \| preset_div,
	host->ioaddr + SDHCI_PRESET_FOR_DDR50);

	clk_prepare_enable(priv->mainck);
	clk_prepare_enable(priv->gck);

	ret = mmc_of_parse(host->mmc);
	if (ret)
	goto clocks_disable_unprepare;

	sdhci_get_of_property(pdev);

	pm_runtime_get_noresume(&pdev->dev);
	pm_runtime_set_active(&pdev->dev);
	pm_runtime_enable(&pdev->dev);
	pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
	pm_runtime_use_autosuspend(&pdev->dev);

	ret = sdhci_add_host(host);
	if (ret)
	goto pm_runtime_disable;

	/*
	* When calling sdhci_runtime_suspend_host(), the sdhci layer makes
	* the assumption that all the clocks of the controller are disabled.
	* It means we can't get irq from it when it is runtime suspended.
	* For that reason, it is not planned to wake-up on a card detect irq
	* from the controller.
	* If we want to use runtime PM and to be able to wake-up on card
	* insertion, we have to use a GPIO for the card detection or we can
	* use polling. Be aware that using polling will resume/suspend the
	* controller between each attempt.
	* Disable SDHCI_QUIRK_BROKEN_CARD_DETECTION to be sure nobody tries
	* to enable polling via device tree with broken-cd property.
	*/
	if (mmc_card_is_removable(host->mmc) &&
	mmc_gpio_get_cd(host->mmc) < 0) {
	host->mmc->caps \|= MMC_CAP_NEEDS_POLL;
	host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
	}

	pm_runtime_put_autosuspend(&pdev->dev);

	return 0;

	pm_runtime_disable:
	pm_runtime_disable(&pdev->dev);
	pm_runtime_set_suspended(&pdev->dev);
	pm_runtime_put_noidle(&pdev->dev);
	clocks_disable_unprepare:
	clk_disable_unprepare(priv->gck);
	clk_disable_unprepare(priv->mainck);
	hclock_disable_unprepare:
	clk_disable_unprepare(priv->hclock);
	sdhci_pltfm_free(pdev);
	return ret;
	}

	static int sdhci_at91_remove(struct platform_device *pdev)
	{
	struct sdhci_host *host = platform_get_drvdata(pdev);
	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
	struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host);
	struct clk *gck = priv->gck;
	struct clk *hclock = priv->hclock;
	struct clk *mainck = priv->mainck;

	pm_runtime_get_sync(&pdev->dev);
	pm_runtime_disable(&pdev->dev);
	pm_runtime_put_noidle(&pdev->dev);

	sdhci_pltfm_unregister(pdev);

	clk_disable_unprepare(gck);
	clk_disable_unprepare(hclock);
	clk_disable_unprepare(mainck);

	return 0;
	}

	static struct platform_driver sdhci_at91_driver = {
	.driver = {
	.name = "sdhci-at91",
	.of_match_table = sdhci_at91_dt_match,
	.pm = &sdhci_at91_dev_pm_ops,
	},
	.probe = sdhci_at91_probe,
	.remove = sdhci_at91_remove,
	};

	module_platform_driver(sdhci_at91_driver);

	MODULE_DESCRIPTION("SDHCI driver for at91");
	MODULE_AUTHOR("Ludovic Desroches <ludovic.desroches@atmel.com>");
	MODULE_LICENSE("GPL v2");