diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 6a451f4..c3b1430 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -304,3 +304,15 @@
 Who:	Richard Purdie <rpurdie@rpsys.net>
 
 ---------------------------
+
+What:	Wireless extensions over netlink (CONFIG_NET_WIRELESS_RTNETLINK)
+When:	with the merge of wireless-dev, 2.6.22 or later
+Why:	The option/code is
+	 * not enabled on most kernels
+	 * not required by any userspace tools (except an experimental one,
+	   and even there only for some parts, others use ioctl)
+	 * pointless since wext is no longer evolving and the ioctl
+	   interface needs to be kept
+Who:	Johannes Berg <johannes@sipsolutions.net>
+
+---------------------------
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 72af5de..5484ab5 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -41,6 +41,7 @@
   2.11	/proc/sys/fs/mqueue - POSIX message queues filesystem
   2.12	/proc/<pid>/oom_adj - Adjust the oom-killer score
   2.13	/proc/<pid>/oom_score - Display current oom-killer score
+  2.14	/proc/<pid>/io - Display the IO accounting fields
 
 ------------------------------------------------------------------------------
 Preface
@@ -1990,3 +1991,107 @@
 command to write value into these files, thereby changing the default settings
 of the kernel.
 ------------------------------------------------------------------------------
+
+2.14  /proc/<pid>/io - Display the IO accounting fields
+-------------------------------------------------------
+
+This file contains IO statistics for each running process
+
+Example
+-------
+
+test:/tmp # dd if=/dev/zero of=/tmp/test.dat &
+[1] 3828
+
+test:/tmp # cat /proc/3828/io
+rchar: 323934931
+wchar: 323929600
+syscr: 632687
+syscw: 632675
+read_bytes: 0
+write_bytes: 323932160
+cancelled_write_bytes: 0
+
+
+Description
+-----------
+
+rchar
+-----
+
+I/O counter: chars read
+The number of bytes which this task has caused to be read from storage. This
+is simply the sum of bytes which this process passed to read() and pread().
+It includes things like tty IO and it is unaffected by whether or not actual
+physical disk IO was required (the read might have been satisfied from
+pagecache)
+
+
+wchar
+-----
+
+I/O counter: chars written
+The number of bytes which this task has caused, or shall cause to be written
+to disk. Similar caveats apply here as with rchar.
+
+
+syscr
+-----
+
+I/O counter: read syscalls
+Attempt to count the number of read I/O operations, i.e. syscalls like read()
+and pread().
+
+
+syscw
+-----
+
+I/O counter: write syscalls
+Attempt to count the number of write I/O operations, i.e. syscalls like
+write() and pwrite().
+
+
+read_bytes
+----------
+
+I/O counter: bytes read
+Attempt to count the number of bytes which this process really did cause to
+be fetched from the storage layer. Done at the submit_bio() level, so it is
+accurate for block-backed filesystems. <please add status regarding NFS and
+CIFS at a later time>
+
+
+write_bytes
+-----------
+
+I/O counter: bytes written
+Attempt to count the number of bytes which this process caused to be sent to
+the storage layer. This is done at page-dirtying time.
+
+
+cancelled_write_bytes
+---------------------
+
+The big inaccuracy here is truncate. If a process writes 1MB to a file and
+then deletes the file, it will in fact perform no writeout. But it will have
+been accounted as having caused 1MB of write.
+In other words: The number of bytes which this process caused to not happen,
+by truncating pagecache. A task can cause "negative" IO too. If this task
+truncates some dirty pagecache, some IO which another task has been accounted
+for (in it's write_bytes) will not be happening. We _could_ just subtract that
+from the truncating task's write_bytes, but there is information loss in doing
+that.
+
+
+Note
+----
+
+At its current implementation state, this is a bit racy on 32-bit machines: if
+process A reads process B's /proc/pid/io while process B is updating one of
+those 64-bit counters, process A could see an intermediate result.
+
+
+More information about this can be found within the taskstats documentation in
+Documentation/accounting.
+
+------------------------------------------------------------------------------
diff --git a/MAINTAINERS b/MAINTAINERS
index 1dfba85..9993b90 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2553,16 +2553,8 @@
 S:	Maintained
 
 PARALLEL PORT SUPPORT
-P:	Phil Blundell
-M:	philb@gnu.org
-P:	Tim Waugh
-M:	tim@cyberelk.net
-P:	David Campbell
-P:	Andrea Arcangeli
-M:	andrea@suse.de
 L:	linux-parport@lists.infradead.org
-W:	http://people.redhat.com/twaugh/parport/
-S:	Maintained
+S:	Orphan
 
 PARIDE DRIVERS FOR PARALLEL PORT IDE DEVICES
 P:	Tim Waugh
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ac2ffdc..e7baca2 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -21,6 +21,10 @@
 config SYS_SUPPORTS_APM_EMULATION
 	bool
 
+config GENERIC_GPIO
+	bool
+	default n
+
 config GENERIC_TIME
 	bool
 	default n
@@ -163,6 +167,7 @@
 
 config ARCH_AT91
 	bool "Atmel AT91"
+	select GENERIC_GPIO
 	help
 	  This enables support for systems based on the Atmel AT91RM9200
 	  and AT91SAM9xxx processors.
@@ -304,6 +309,7 @@
 	bool "PXA2xx-based"
 	depends on MMU
 	select ARCH_MTD_XIP
+	select GENERIC_GPIO
 	select GENERIC_TIME
 	help
 	  Support for Intel's PXA2XX processor line.
@@ -325,11 +331,13 @@
 	select ISA
 	select ARCH_DISCONTIGMEM_ENABLE
 	select ARCH_MTD_XIP
+	select GENERIC_GPIO
 	help
 	  Support for StrongARM 11x0 based boards.
 
 config ARCH_S3C2410
 	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
+	select GENERIC_GPIO
 	help
 	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
 	  BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
@@ -354,6 +362,7 @@
 
 config ARCH_OMAP
 	bool "TI OMAP"
+	select GENERIC_GPIO
 	help
 	  Support for TI's OMAP platform (OMAP1 and OMAP2).
 
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index bb059a4..ce4013a 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -22,6 +22,10 @@
 config UID16
 	bool
 
+config GENERIC_GPIO
+	bool
+	default y
+
 config GENERIC_HARDIRQS
 	bool
 	default y
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
index 2f76725..cee4ff6 100644
--- a/arch/i386/Kconfig
+++ b/arch/i386/Kconfig
@@ -220,11 +220,11 @@
 
 config VMI
 	bool "VMI Paravirt-ops support"
-	depends on PARAVIRT && !NO_HZ
-	default y
+	depends on PARAVIRT
 	help
-	  VMI provides a paravirtualized interface to multiple hypervisors
-	  include VMware ESX server and Xen by connecting to a ROM module
+	  VMI provides a paravirtualized interface to the VMware ESX server
+	  (it could be used by other hypervisors in theory too, but is not
+	  at the moment), by linking the kernel to a GPL-ed ROM module
 	  provided by the hypervisor.
 
 config ACPI_SRAT
@@ -1287,12 +1287,3 @@
 config KTIME_SCALAR
 	bool
 	default y
-
-config NO_IDLE_HZ
-	bool
-	depends on PARAVIRT
-	default y
-	help
-	  Switches the regular HZ timer off when the system is going idle.
-	  This helps a hypervisor detect that the Linux system is idle,
-	  reducing the overhead of idle systems.
diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c
index 7a2c9cb..2383bcf 100644
--- a/arch/i386/kernel/apic.c
+++ b/arch/i386/kernel/apic.c
@@ -493,8 +493,15 @@
 		/* No broadcast on UP ! */
 		if (num_possible_cpus() == 1)
 			return;
-	} else
-		lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
+	} else {
+		/*
+		 * If nmi_watchdog is set to IO_APIC, we need the
+		 * PIT/HPET going.  Otherwise register lapic as a dummy
+		 * device.
+		 */
+		if (nmi_watchdog != NMI_IO_APIC)
+			lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
+	}
 
 	/* Setup the lapic or request the broadcast */
 	setup_APIC_timer();
diff --git a/arch/i386/kernel/hpet.c b/arch/i386/kernel/hpet.c
index e1006b7..f3ab61e 100644
--- a/arch/i386/kernel/hpet.c
+++ b/arch/i386/kernel/hpet.c
@@ -201,12 +201,30 @@
 }
 
 /*
+ * Clock source related code
+ */
+static cycle_t read_hpet(void)
+{
+	return (cycle_t)hpet_readl(HPET_COUNTER);
+}
+
+static struct clocksource clocksource_hpet = {
+	.name		= "hpet",
+	.rating		= 250,
+	.read		= read_hpet,
+	.mask		= HPET_MASK,
+	.shift		= HPET_SHIFT,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+/*
  * Try to setup the HPET timer
  */
 int __init hpet_enable(void)
 {
 	unsigned long id;
 	uint64_t hpet_freq;
+	u64 tmp;
 
 	if (!is_hpet_capable())
 		return 0;
@@ -253,6 +271,25 @@
 	/* Start the counter */
 	hpet_start_counter();
 
+	/* Initialize and register HPET clocksource
+	 *
+	 * hpet period is in femto seconds per cycle
+	 * so we need to convert this to ns/cyc units
+	 * aproximated by mult/2^shift
+	 *
+	 *  fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift
+	 *  fsec/cyc * 1ns/1000000fsec * 2^shift = mult
+	 *  fsec/cyc * 2^shift * 1nsec/1000000fsec = mult
+	 *  (fsec/cyc << shift)/1000000 = mult
+	 *  (hpet_period << shift)/FSEC_PER_NSEC = mult
+	 */
+	tmp = (u64)hpet_period << HPET_SHIFT;
+	do_div(tmp, FSEC_PER_NSEC);
+	clocksource_hpet.mult = (u32)tmp;
+
+	clocksource_register(&clocksource_hpet);
+
+
 	if (id & HPET_ID_LEGSUP) {
 		hpet_enable_int();
 		hpet_reserve_platform_timers(id);
@@ -273,49 +310,6 @@
 	return 0;
 }
 
-/*
- * Clock source related code
- */
-static cycle_t read_hpet(void)
-{
-	return (cycle_t)hpet_readl(HPET_COUNTER);
-}
-
-static struct clocksource clocksource_hpet = {
-	.name		= "hpet",
-	.rating		= 250,
-	.read		= read_hpet,
-	.mask		= HPET_MASK,
-	.shift		= HPET_SHIFT,
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static int __init init_hpet_clocksource(void)
-{
-	u64 tmp;
-
-	if (!hpet_virt_address)
-		return -ENODEV;
-
-	/*
-	 * hpet period is in femto seconds per cycle
-	 * so we need to convert this to ns/cyc units
-	 * aproximated by mult/2^shift
-	 *
-	 *  fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift
-	 *  fsec/cyc * 1ns/1000000fsec * 2^shift = mult
-	 *  fsec/cyc * 2^shift * 1nsec/1000000fsec = mult
-	 *  (fsec/cyc << shift)/1000000 = mult
-	 *  (hpet_period << shift)/FSEC_PER_NSEC = mult
-	 */
-	tmp = (u64)hpet_period << HPET_SHIFT;
-	do_div(tmp, FSEC_PER_NSEC);
-	clocksource_hpet.mult = (u32)tmp;
-
-	return clocksource_register(&clocksource_hpet);
-}
-
-module_init(init_hpet_clocksource);
 
 #ifdef CONFIG_HPET_EMULATE_RTC
 
diff --git a/arch/i386/kernel/i8253.c b/arch/i386/kernel/i8253.c
index a6bc7bb..5cbb776 100644
--- a/arch/i386/kernel/i8253.c
+++ b/arch/i386/kernel/i8253.c
@@ -195,4 +195,4 @@
 	clocksource_pit.mult = clocksource_hz2mult(CLOCK_TICK_RATE, 20);
 	return clocksource_register(&clocksource_pit);
 }
-module_init(init_pit_clocksource);
+arch_initcall(init_pit_clocksource);
diff --git a/arch/i386/kernel/paravirt.c b/arch/i386/kernel/paravirt.c
index c156ecf..2ec331e 100644
--- a/arch/i386/kernel/paravirt.c
+++ b/arch/i386/kernel/paravirt.c
@@ -32,6 +32,7 @@
 #include <asm/fixmap.h>
 #include <asm/apic.h>
 #include <asm/tlbflush.h>
+#include <asm/timer.h>
 
 /* nop stub */
 static void native_nop(void)
@@ -493,7 +494,7 @@
 	.memory_setup = machine_specific_memory_setup,
 	.get_wallclock = native_get_wallclock,
 	.set_wallclock = native_set_wallclock,
-	.time_init = time_init_hook,
+	.time_init = hpet_time_init,
 	.init_IRQ = native_init_IRQ,
 
 	.cpuid = native_cpuid,
@@ -520,6 +521,8 @@
 	.write_msr = native_write_msr,
 	.read_tsc = native_read_tsc,
 	.read_pmc = native_read_pmc,
+	.get_scheduled_cycles = native_read_tsc,
+	.get_cpu_khz = native_calculate_cpu_khz,
 	.load_tr_desc = native_load_tr_desc,
 	.set_ldt = native_set_ldt,
 	.load_gdt = native_load_gdt,
@@ -535,7 +538,6 @@
 
 	.set_iopl_mask = native_set_iopl_mask,
 	.io_delay = native_io_delay,
-	.const_udelay = __const_udelay,
 
 #ifdef CONFIG_X86_LOCAL_APIC
 	.apic_write = native_apic_write,
@@ -550,6 +552,8 @@
 	.flush_tlb_kernel = native_flush_tlb_global,
 	.flush_tlb_single = native_flush_tlb_single,
 
+	.map_pt_hook = (void *)native_nop,
+
 	.alloc_pt = (void *)native_nop,
 	.alloc_pd = (void *)native_nop,
 	.alloc_pd_clone = (void *)native_nop,
diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c
index 122623d..698c24f 100644
--- a/arch/i386/kernel/setup.c
+++ b/arch/i386/kernel/setup.c
@@ -657,5 +657,4 @@
 	conswitchp = &dummy_con;
 #endif
 #endif
-	tsc_init();
 }
diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c
index 48bfcaa1..9b0dd27 100644
--- a/arch/i386/kernel/smpboot.c
+++ b/arch/i386/kernel/smpboot.c
@@ -33,11 +33,6 @@
  *		Dave Jones	:	Report invalid combinations of Athlon CPUs.
 *		Rusty Russell	:	Hacked into shape for new "hotplug" boot process. */
 
-
-/* SMP boot always wants to use real time delay to allow sufficient time for
- * the APs to come online */
-#define USE_REAL_TIME_DELAY
-
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
diff --git a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c
index a535005..94e5cb0 100644
--- a/arch/i386/kernel/time.c
+++ b/arch/i386/kernel/time.c
@@ -262,14 +262,23 @@
 
 extern void (*late_time_init)(void);
 /* Duplicate of time_init() below, with hpet_enable part added */
-static void __init hpet_time_init(void)
+void __init hpet_time_init(void)
 {
 	if (!hpet_enable())
 		setup_pit_timer();
-	do_time_init();
+	time_init_hook();
 }
 
+/*
+ * This is called directly from init code; we must delay timer setup in the
+ * HPET case as we can't make the decision to turn on HPET this early in the
+ * boot process.
+ *
+ * The chosen time_init function will usually be hpet_time_init, above, but
+ * in the case of virtual hardware, an alternative function may be substituted.
+ */
 void __init time_init(void)
 {
-	late_time_init = hpet_time_init;
+	tsc_init();
+	late_time_init = choose_time_init();
 }
diff --git a/arch/i386/kernel/tsc.c b/arch/i386/kernel/tsc.c
index 3082a41..875d8a6 100644
--- a/arch/i386/kernel/tsc.c
+++ b/arch/i386/kernel/tsc.c
@@ -14,6 +14,7 @@
 #include <asm/delay.h>
 #include <asm/tsc.h>
 #include <asm/io.h>
+#include <asm/timer.h>
 
 #include "mach_timer.h"
 
@@ -102,9 +103,6 @@
 {
 	unsigned long long this_offset;
 
-	if (unlikely(custom_sched_clock))
-		return (*custom_sched_clock)();
-
 	/*
 	 * Fall back to jiffies if there's no TSC available:
 	 */
@@ -113,13 +111,13 @@
 		return (jiffies_64 - INITIAL_JIFFIES) * (1000000000 / HZ);
 
 	/* read the Time Stamp Counter: */
-	rdtscll(this_offset);
+	get_scheduled_cycles(this_offset);
 
 	/* return the value in ns */
 	return cycles_2_ns(this_offset);
 }
 
-static unsigned long calculate_cpu_khz(void)
+unsigned long native_calculate_cpu_khz(void)
 {
 	unsigned long long start, end;
 	unsigned long count;
@@ -186,34 +184,6 @@
 
 EXPORT_SYMBOL(recalibrate_cpu_khz);
 
-void __init tsc_init(void)
-{
-	if (!cpu_has_tsc || tsc_disable)
-		goto out_no_tsc;
-
-	cpu_khz = calculate_cpu_khz();
-	tsc_khz = cpu_khz;
-
-	if (!cpu_khz)
-		goto out_no_tsc;
-
-	printk("Detected %lu.%03lu MHz processor.\n",
-				(unsigned long)cpu_khz / 1000,
-				(unsigned long)cpu_khz % 1000);
-
-	set_cyc2ns_scale(cpu_khz);
-	use_tsc_delay();
-	return;
-
-out_no_tsc:
-	/*
-	 * Set the tsc_disable flag if there's no TSC support, this
-	 * makes it a fast flag for the kernel to see whether it
-	 * should be using the TSC.
-	 */
-	tsc_disable = 1;
-}
-
 #ifdef CONFIG_CPU_FREQ
 
 /*
@@ -383,28 +353,47 @@
 static inline void check_geode_tsc_reliable(void) { }
 #endif
 
-static int __init init_tsc_clocksource(void)
+
+void __init tsc_init(void)
 {
+	if (!cpu_has_tsc || tsc_disable)
+		goto out_no_tsc;
 
-	if (cpu_has_tsc && tsc_khz && !tsc_disable) {
-		/* check blacklist */
-		dmi_check_system(bad_tsc_dmi_table);
+	cpu_khz = calculate_cpu_khz();
+	tsc_khz = cpu_khz;
 
-		unsynchronized_tsc();
-		check_geode_tsc_reliable();
-		current_tsc_khz = tsc_khz;
-		clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz,
+	if (!cpu_khz)
+		goto out_no_tsc;
+
+	printk("Detected %lu.%03lu MHz processor.\n",
+				(unsigned long)cpu_khz / 1000,
+				(unsigned long)cpu_khz % 1000);
+
+	set_cyc2ns_scale(cpu_khz);
+	use_tsc_delay();
+
+	/* Check and install the TSC clocksource */
+	dmi_check_system(bad_tsc_dmi_table);
+
+	unsynchronized_tsc();
+	check_geode_tsc_reliable();
+	current_tsc_khz = tsc_khz;
+	clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz,
 							clocksource_tsc.shift);
-		/* lower the rating if we already know its unstable: */
-		if (check_tsc_unstable()) {
-			clocksource_tsc.rating = 0;
-			clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS;
-		}
-
-		return clocksource_register(&clocksource_tsc);
+	/* lower the rating if we already know its unstable: */
+	if (check_tsc_unstable()) {
+		clocksource_tsc.rating = 0;
+		clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS;
 	}
+	clocksource_register(&clocksource_tsc);
 
-	return 0;
+	return;
+
+out_no_tsc:
+	/*
+	 * Set the tsc_disable flag if there's no TSC support, this
+	 * makes it a fast flag for the kernel to see whether it
+	 * should be using the TSC.
+	 */
+	tsc_disable = 1;
 }
-
-module_init(init_tsc_clocksource);
diff --git a/arch/i386/kernel/vmi.c b/arch/i386/kernel/vmi.c
index bb5a7ab..fbf45fa 100644
--- a/arch/i386/kernel/vmi.c
+++ b/arch/i386/kernel/vmi.c
@@ -35,6 +35,7 @@
 #include <asm/processor.h>
 #include <asm/timer.h>
 #include <asm/vmi_time.h>
+#include <asm/kmap_types.h>
 
 /* Convenient for calling VMI functions indirectly in the ROM */
 typedef u32 __attribute__((regparm(1))) (VROMFUNC)(void);
@@ -48,12 +49,13 @@
 
 static struct vrom_header *vmi_rom;
 static int license_gplok;
-static int disable_nodelay;
 static int disable_pge;
 static int disable_pse;
 static int disable_sep;
 static int disable_tsc;
 static int disable_mtrr;
+static int disable_noidle;
+static int disable_vmi_timer;
 
 /* Cached VMI operations */
 struct {
@@ -255,7 +257,6 @@
 }
 
 /* For NO_IDLE_HZ, we stop the clock when halting the kernel */
-#ifdef CONFIG_NO_IDLE_HZ
 static fastcall void vmi_safe_halt(void)
 {
 	int idle = vmi_stop_hz_timer();
@@ -266,7 +267,6 @@
 		local_irq_enable();
 	}
 }
-#endif
 
 #ifdef CONFIG_DEBUG_PAGE_TYPE
 
@@ -371,6 +371,24 @@
 #define vmi_check_page_type(p,t) do { } while (0)
 #endif
 
+static void vmi_map_pt_hook(int type, pte_t *va, u32 pfn)
+{
+	/*
+	 * Internally, the VMI ROM must map virtual addresses to physical
+	 * addresses for processing MMU updates.  By the time MMU updates
+	 * are issued, this information is typically already lost.
+	 * Fortunately, the VMI provides a cache of mapping slots for active
+	 * page tables.
+	 *
+	 * We use slot zero for the linear mapping of physical memory, and
+	 * in HIGHPTE kernels, slot 1 and 2 for KM_PTE0 and KM_PTE1.
+	 *
+	 *  args:                 SLOT                 VA    COUNT PFN
+	 */
+	BUG_ON(type != KM_PTE0 && type != KM_PTE1);
+	vmi_ops.set_linear_mapping((type - KM_PTE0)+1, (u32)va, 1, pfn);
+}
+
 static void vmi_allocate_pt(u32 pfn)
 {
 	vmi_set_page_type(pfn, VMI_PAGE_L1);
@@ -508,13 +526,14 @@
 #endif
 
 #ifdef CONFIG_SMP
-struct vmi_ap_state ap;
 extern void setup_pda(void);
 
-static void __init /* XXX cpu hotplug */
+static void __devinit
 vmi_startup_ipi_hook(int phys_apicid, unsigned long start_eip,
 		     unsigned long start_esp)
 {
+	struct vmi_ap_state ap;
+
 	/* Default everything to zero.  This is fine for most GPRs. */
 	memset(&ap, 0, sizeof(struct vmi_ap_state));
 
@@ -553,7 +572,7 @@
 	/* Protected mode, paging, AM, WP, NE, MP. */
 	ap.cr0 = 0x80050023;
 	ap.cr4 = mmu_cr4_features;
-	vmi_ops.set_initial_ap_state(__pa(&ap), phys_apicid);
+	vmi_ops.set_initial_ap_state((u32)&ap, phys_apicid);
 }
 #endif
 
@@ -645,12 +664,12 @@
 void vmi_bringup(void)
 {
  	/* We must establish the lowmem mapping for MMU ops to work */
-	if (vmi_rom)
+	if (vmi_ops.set_linear_mapping)
 		vmi_ops.set_linear_mapping(0, __PAGE_OFFSET, max_low_pfn, 0);
 }
 
 /*
- * Return a pointer to the VMI function or a NOP stub
+ * Return a pointer to a VMI function or NULL if unimplemented
  */
 static void *vmi_get_function(int vmicall)
 {
@@ -661,12 +680,13 @@
 	if (rel->type == VMI_RELOCATION_CALL_REL)
 		return (void *)rel->eip;
 	else
-		return (void *)vmi_nop;
+		return NULL;
 }
 
 /*
  * Helper macro for making the VMI paravirt-ops fill code readable.
- * For unimplemented operations, fall back to default.
+ * For unimplemented operations, fall back to default, unless nop
+ * is returned by the ROM.
  */
 #define para_fill(opname, vmicall)				\
 do {								\
@@ -675,9 +695,29 @@
 	if (rel->type != VMI_RELOCATION_NONE) {			\
 		BUG_ON(rel->type != VMI_RELOCATION_CALL_REL);	\
 		paravirt_ops.opname = (void *)rel->eip;		\
+	} else if (rel->type == VMI_RELOCATION_NOP) 		\
+		paravirt_ops.opname = (void *)vmi_nop;		\
+} while (0)
+
+/*
+ * Helper macro for making the VMI paravirt-ops fill code readable.
+ * For cached operations which do not match the VMI ROM ABI and must
+ * go through a tranlation stub.  Ignore NOPs, since it is not clear
+ * a NOP * VMI function corresponds to a NOP paravirt-op when the
+ * functions are not in 1-1 correspondence.
+ */
+#define para_wrap(opname, wrapper, cache, vmicall)		\
+do {								\
+	reloc = call_vrom_long_func(vmi_rom, get_reloc,		\
+				    VMI_CALL_##vmicall);	\
+	BUG_ON(rel->type == VMI_RELOCATION_JUMP_REL);		\
+	if (rel->type == VMI_RELOCATION_CALL_REL) {		\
+		paravirt_ops.opname = wrapper;			\
+		vmi_ops.cache = (void *)rel->eip;		\
 	}							\
 } while (0)
 
+
 /*
  * Activate the VMI interface and switch into paravirtualized mode
  */
@@ -714,13 +754,8 @@
 	 *  rdpmc is not yet used in Linux
 	 */
 
-	/* CPUID is special, so very special */
-	reloc = call_vrom_long_func(vmi_rom, get_reloc,	VMI_CALL_CPUID);
-	if (rel->type != VMI_RELOCATION_NONE) {
-		BUG_ON(rel->type != VMI_RELOCATION_CALL_REL);
-		vmi_ops.cpuid = (void *)rel->eip;
-		paravirt_ops.cpuid = vmi_cpuid;
-	}
+	/* CPUID is special, so very special it gets wrapped like a present */
+	para_wrap(cpuid, vmi_cpuid, cpuid, CPUID);
 
 	para_fill(clts, CLTS);
 	para_fill(get_debugreg, GetDR);
@@ -737,38 +772,26 @@
 	para_fill(restore_fl, SetInterruptMask);
 	para_fill(irq_disable, DisableInterrupts);
 	para_fill(irq_enable, EnableInterrupts);
+
 	/* irq_save_disable !!! sheer pain */
 	patch_offset(&irq_save_disable_callout[IRQ_PATCH_INT_MASK],
 		     (char *)paravirt_ops.save_fl);
 	patch_offset(&irq_save_disable_callout[IRQ_PATCH_DISABLE],
 		     (char *)paravirt_ops.irq_disable);
-#ifndef CONFIG_NO_IDLE_HZ
-	para_fill(safe_halt, Halt);
-#else
-	vmi_ops.halt = vmi_get_function(VMI_CALL_Halt);
-	paravirt_ops.safe_halt = vmi_safe_halt;
-#endif
+
 	para_fill(wbinvd, WBINVD);
+	para_fill(read_tsc, RDTSC);
+
+	/* The following we emulate with trap and emulate for now */
 	/* paravirt_ops.read_msr = vmi_rdmsr */
 	/* paravirt_ops.write_msr = vmi_wrmsr */
-	para_fill(read_tsc, RDTSC);
 	/* paravirt_ops.rdpmc = vmi_rdpmc */
 
-	/* TR interface doesn't pass TR value */
-	reloc = call_vrom_long_func(vmi_rom, get_reloc,	VMI_CALL_SetTR);
-	if (rel->type != VMI_RELOCATION_NONE) {
-		BUG_ON(rel->type != VMI_RELOCATION_CALL_REL);
-		vmi_ops.set_tr = (void *)rel->eip;
-		paravirt_ops.load_tr_desc = vmi_set_tr;
-	}
+	/* TR interface doesn't pass TR value, wrap */
+	para_wrap(load_tr_desc, vmi_set_tr, set_tr, SetTR);
 
 	/* LDT is special, too */
-	reloc = call_vrom_long_func(vmi_rom, get_reloc,	VMI_CALL_SetLDT);
-	if (rel->type != VMI_RELOCATION_NONE) {
-		BUG_ON(rel->type != VMI_RELOCATION_CALL_REL);
-		vmi_ops._set_ldt = (void *)rel->eip;
-		paravirt_ops.set_ldt = vmi_set_ldt;
-	}
+	para_wrap(set_ldt, vmi_set_ldt, _set_ldt, SetLDT);
 
 	para_fill(load_gdt, SetGDT);
 	para_fill(load_idt, SetIDT);
@@ -779,28 +802,14 @@
 	para_fill(write_ldt_entry, WriteLDTEntry);
 	para_fill(write_gdt_entry, WriteGDTEntry);
 	para_fill(write_idt_entry, WriteIDTEntry);
-	reloc = call_vrom_long_func(vmi_rom, get_reloc,
-				    VMI_CALL_UpdateKernelStack);
-	if (rel->type != VMI_RELOCATION_NONE) {
-		BUG_ON(rel->type != VMI_RELOCATION_CALL_REL);
-		vmi_ops.set_kernel_stack = (void *)rel->eip;
-		paravirt_ops.load_esp0 = vmi_load_esp0;
-	}
-
+	para_wrap(load_esp0, vmi_load_esp0, set_kernel_stack, UpdateKernelStack);
 	para_fill(set_iopl_mask, SetIOPLMask);
-	paravirt_ops.io_delay = (void *)vmi_nop;
-	if (!disable_nodelay) {
-		paravirt_ops.const_udelay = (void *)vmi_nop;
-	}
-
+	para_fill(io_delay, IODelay);
 	para_fill(set_lazy_mode, SetLazyMode);
 
-	reloc = call_vrom_long_func(vmi_rom, get_reloc, VMI_CALL_FlushTLB);
-	if (rel->type != VMI_RELOCATION_NONE) {
-		vmi_ops.flush_tlb = (void *)rel->eip;
-		paravirt_ops.flush_tlb_user = vmi_flush_tlb_user;
-		paravirt_ops.flush_tlb_kernel = vmi_flush_tlb_kernel;
-	}
+	/* user and kernel flush are just handled with different flags to FlushTLB */
+	para_wrap(flush_tlb_user, vmi_flush_tlb_user, flush_tlb, FlushTLB);
+	para_wrap(flush_tlb_kernel, vmi_flush_tlb_kernel, flush_tlb, FlushTLB);
 	para_fill(flush_tlb_single, InvalPage);
 
 	/*
@@ -815,27 +824,40 @@
 	vmi_ops.set_pte = vmi_get_function(VMI_CALL_SetPxE);
 	vmi_ops.update_pte = vmi_get_function(VMI_CALL_UpdatePxE);
 #endif
-	vmi_ops.set_linear_mapping = vmi_get_function(VMI_CALL_SetLinearMapping);
-	vmi_ops.allocate_page = vmi_get_function(VMI_CALL_AllocatePage);
-	vmi_ops.release_page = vmi_get_function(VMI_CALL_ReleasePage);
 
-	paravirt_ops.alloc_pt = vmi_allocate_pt;
-	paravirt_ops.alloc_pd = vmi_allocate_pd;
-	paravirt_ops.alloc_pd_clone = vmi_allocate_pd_clone;
-	paravirt_ops.release_pt = vmi_release_pt;
-	paravirt_ops.release_pd = vmi_release_pd;
-	paravirt_ops.set_pte = vmi_set_pte;
-	paravirt_ops.set_pte_at = vmi_set_pte_at;
-	paravirt_ops.set_pmd = vmi_set_pmd;
-	paravirt_ops.pte_update = vmi_update_pte;
-	paravirt_ops.pte_update_defer = vmi_update_pte_defer;
+	if (vmi_ops.set_pte) {
+		paravirt_ops.set_pte = vmi_set_pte;
+		paravirt_ops.set_pte_at = vmi_set_pte_at;
+		paravirt_ops.set_pmd = vmi_set_pmd;
 #ifdef CONFIG_X86_PAE
-	paravirt_ops.set_pte_atomic = vmi_set_pte_atomic;
-	paravirt_ops.set_pte_present = vmi_set_pte_present;
-	paravirt_ops.set_pud = vmi_set_pud;
-	paravirt_ops.pte_clear = vmi_pte_clear;
-	paravirt_ops.pmd_clear = vmi_pmd_clear;
+		paravirt_ops.set_pte_atomic = vmi_set_pte_atomic;
+		paravirt_ops.set_pte_present = vmi_set_pte_present;
+		paravirt_ops.set_pud = vmi_set_pud;
+		paravirt_ops.pte_clear = vmi_pte_clear;
+		paravirt_ops.pmd_clear = vmi_pmd_clear;
 #endif
+	}
+
+	if (vmi_ops.update_pte) {
+		paravirt_ops.pte_update = vmi_update_pte;
+		paravirt_ops.pte_update_defer = vmi_update_pte_defer;
+	}
+
+	vmi_ops.allocate_page = vmi_get_function(VMI_CALL_AllocatePage);
+	if (vmi_ops.allocate_page) {
+		paravirt_ops.alloc_pt = vmi_allocate_pt;
+		paravirt_ops.alloc_pd = vmi_allocate_pd;
+		paravirt_ops.alloc_pd_clone = vmi_allocate_pd_clone;
+	}
+
+	vmi_ops.release_page = vmi_get_function(VMI_CALL_ReleasePage);
+	if (vmi_ops.release_page) {
+		paravirt_ops.release_pt = vmi_release_pt;
+		paravirt_ops.release_pd = vmi_release_pd;
+	}
+	para_wrap(map_pt_hook, vmi_map_pt_hook, set_linear_mapping,
+		  SetLinearMapping);
+
 	/*
 	 * These MUST always be patched.  Don't support indirect jumps
 	 * through these operations, as the VMI interface may use either
@@ -847,21 +869,20 @@
 	paravirt_ops.iret = (void *)0xbadbab0;
 
 #ifdef CONFIG_SMP
-	paravirt_ops.startup_ipi_hook = vmi_startup_ipi_hook;
-	vmi_ops.set_initial_ap_state = vmi_get_function(VMI_CALL_SetInitialAPState);
+	para_wrap(startup_ipi_hook, vmi_startup_ipi_hook, set_initial_ap_state, SetInitialAPState);
 #endif
 
 #ifdef CONFIG_X86_LOCAL_APIC
-	paravirt_ops.apic_read = vmi_get_function(VMI_CALL_APICRead);
-	paravirt_ops.apic_write = vmi_get_function(VMI_CALL_APICWrite);
-	paravirt_ops.apic_write_atomic = vmi_get_function(VMI_CALL_APICWrite);
+	para_fill(apic_read, APICRead);
+	para_fill(apic_write, APICWrite);
+	para_fill(apic_write_atomic, APICWrite);
 #endif
 
 	/*
 	 * Check for VMI timer functionality by probing for a cycle frequency method
 	 */
 	reloc = call_vrom_long_func(vmi_rom, get_reloc, VMI_CALL_GetCycleFrequency);
-	if (rel->type != VMI_RELOCATION_NONE) {
+	if (!disable_vmi_timer && rel->type != VMI_RELOCATION_NONE) {
 		vmi_timer_ops.get_cycle_frequency = (void *)rel->eip;
 		vmi_timer_ops.get_cycle_counter =
 			vmi_get_function(VMI_CALL_GetCycleCounter);
@@ -879,9 +900,22 @@
 		paravirt_ops.setup_boot_clock = vmi_timer_setup_boot_alarm;
 		paravirt_ops.setup_secondary_clock = vmi_timer_setup_secondary_alarm;
 #endif
-		custom_sched_clock = vmi_sched_clock;
+		paravirt_ops.get_scheduled_cycles = vmi_get_sched_cycles;
+ 		paravirt_ops.get_cpu_khz = vmi_cpu_khz;
+
+		/* We have true wallclock functions; disable CMOS clock sync */
+		no_sync_cmos_clock = 1;
+	} else {
+		disable_noidle = 1;
+		disable_vmi_timer = 1;
 	}
 
+	/* No idle HZ mode only works if VMI timer and no idle is enabled */
+	if (disable_noidle || disable_vmi_timer)
+		para_fill(safe_halt, Halt);
+	else
+		para_wrap(safe_halt, vmi_safe_halt, halt, Halt);
+
 	/*
 	 * Alternative instruction rewriting doesn't happen soon enough
 	 * to convert VMI_IRET to a call instead of a jump; so we have
@@ -914,7 +948,9 @@
 
 	local_irq_save(flags);
 	activate_vmi();
-#ifdef CONFIG_SMP
+
+#ifdef CONFIG_X86_IO_APIC
+	/* This is virtual hardware; timer routing is wired correctly */
 	no_timer_check = 1;
 #endif
 	local_irq_restore(flags & X86_EFLAGS_IF);
@@ -925,9 +961,7 @@
 	if (!arg)
 		return -EINVAL;
 
-	if (!strcmp(arg, "disable_nodelay"))
-		disable_nodelay = 1;
-	else if (!strcmp(arg, "disable_pge")) {
+	if (!strcmp(arg, "disable_pge")) {
 		clear_bit(X86_FEATURE_PGE, boot_cpu_data.x86_capability);
 		disable_pge = 1;
 	} else if (!strcmp(arg, "disable_pse")) {
@@ -942,7 +976,11 @@
 	} else if (!strcmp(arg, "disable_mtrr")) {
 		clear_bit(X86_FEATURE_MTRR, boot_cpu_data.x86_capability);
 		disable_mtrr = 1;
-	}
+	} else if (!strcmp(arg, "disable_timer")) {
+		disable_vmi_timer = 1;
+		disable_noidle = 1;
+	} else if (!strcmp(arg, "disable_noidle"))
+		disable_noidle = 1;
 	return 0;
 }
 
diff --git a/arch/i386/kernel/vmitime.c b/arch/i386/kernel/vmitime.c
index 76d2adc..8dc72d5 100644
--- a/arch/i386/kernel/vmitime.c
+++ b/arch/i386/kernel/vmitime.c
@@ -153,13 +153,6 @@
 	ts->tv_sec = wallclock;
 }
 
-static void update_xtime_from_wallclock(void)
-{
-	struct timespec ts;
-	vmi_get_wallclock_ts(&ts);
-	do_settimeofday(&ts);
-}
-
 unsigned long vmi_get_wallclock(void)
 {
 	struct timespec ts;
@@ -172,11 +165,20 @@
 	return -1;
 }
 
-unsigned long long vmi_sched_clock(void)
+unsigned long long vmi_get_sched_cycles(void)
 {
 	return read_available_cycles();
 }
 
+unsigned long vmi_cpu_khz(void)
+{
+	unsigned long long khz;
+
+	khz = vmi_timer_ops.get_cycle_frequency();
+	(void)do_div(khz, 1000);
+	return khz;
+}
+
 void __init vmi_time_init(void)
 {
 	unsigned long long cycles_per_sec, cycles_per_msec;
@@ -188,25 +190,16 @@
 	set_intr_gate(LOCAL_TIMER_VECTOR, apic_vmi_timer_interrupt);
 #endif
 
-	no_sync_cmos_clock = 1;
-
-	vmi_get_wallclock_ts(&xtime);
-	set_normalized_timespec(&wall_to_monotonic,
-		-xtime.tv_sec, -xtime.tv_nsec);
-
 	real_cycles_accounted_system = read_real_cycles();
-	update_xtime_from_wallclock();
 	per_cpu(process_times_cycles_accounted_cpu, 0) = read_available_cycles();
 
 	cycles_per_sec = vmi_timer_ops.get_cycle_frequency();
-
 	cycles_per_jiffy = cycles_per_sec;
 	(void)do_div(cycles_per_jiffy, HZ);
 	cycles_per_alarm = cycles_per_sec;
 	(void)do_div(cycles_per_alarm, alarm_hz);
 	cycles_per_msec = cycles_per_sec;
 	(void)do_div(cycles_per_msec, 1000);
-	cpu_khz = cycles_per_msec;
 
 	printk(KERN_WARNING "VMI timer cycles/sec = %llu ; cycles/jiffy = %llu ;"
 	       "cycles/alarm = %llu\n", cycles_per_sec, cycles_per_jiffy,
@@ -250,7 +243,7 @@
 
 /* Initialize the time accounting variables for an AP on an SMP system.
  * Also, set the local alarm for the AP. */
-void __init vmi_timer_setup_secondary_alarm(void)
+void __devinit vmi_timer_setup_secondary_alarm(void)
 {
 	int cpu = smp_processor_id();
 
@@ -276,16 +269,13 @@
 
 	cycles_not_accounted = cur_real_cycles - real_cycles_accounted_system;
 	while (cycles_not_accounted >= cycles_per_jiffy) {
-		/* systems wide jiffies and wallclock. */
+		/* systems wide jiffies. */
 		do_timer(1);
 
 		cycles_not_accounted -= cycles_per_jiffy;
 		real_cycles_accounted_system += cycles_per_jiffy;
 	}
 
-	if (vmi_timer_ops.wallclock_updated())
-		update_xtime_from_wallclock();
-
 	write_sequnlock(&xtime_lock);
 }
 
@@ -380,7 +370,6 @@
 	unsigned long seq, next;
 	unsigned long long real_cycles_expiry;
 	int cpu = smp_processor_id();
-	int idle;
 
 	BUG_ON(!irqs_disabled());
 	if (sysctl_hz_timer != 0)
@@ -388,13 +377,13 @@
 
 	cpu_set(cpu, nohz_cpu_mask);
 	smp_mb();
+
 	if (rcu_needs_cpu(cpu) || local_softirq_pending() ||
-	    (next = next_timer_interrupt(), time_before_eq(next, jiffies))) {
+	    (next = next_timer_interrupt(),
+	     time_before_eq(next, jiffies + HZ/CONFIG_VMI_ALARM_HZ))) {
 		cpu_clear(cpu, nohz_cpu_mask);
-		next = jiffies;
-		idle = 0;
-	} else
-		idle = 1;
+		return 0;
+	}
 
 	/* Convert jiffies to the real cycle counter. */
 	do {
@@ -404,17 +393,13 @@
 	} while (read_seqretry(&xtime_lock, seq));
 
 	/* This cpu is going idle. Disable the periodic alarm. */
-	if (idle) {
-		vmi_timer_ops.cancel_alarm(VMI_CYCLES_AVAILABLE);
-		per_cpu(idle_start_jiffies, cpu) = jiffies;
-	}
-
+	vmi_timer_ops.cancel_alarm(VMI_CYCLES_AVAILABLE);
+	per_cpu(idle_start_jiffies, cpu) = jiffies;
 	/* Set the real time alarm to expire at the next event. */
 	vmi_timer_ops.set_alarm(
-		      VMI_ALARM_WIRING | VMI_ALARM_IS_ONESHOT | VMI_CYCLES_REAL,
-		      real_cycles_expiry, 0);
-
-	return idle;
+		VMI_ALARM_WIRING | VMI_ALARM_IS_ONESHOT | VMI_CYCLES_REAL,
+		real_cycles_expiry, 0);
+	return 1;
 }
 
 static void vmi_reenable_hz_timer(int cpu)
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 919fbf5..10093082 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -968,7 +968,6 @@
 int pci_enable_msix(struct pci_dev* dev, struct msix_entry *entries, int nvec) {return -1;}
 void pci_disable_msix(struct pci_dev *dev) {}
 void msi_remove_pci_irq_vectors(struct pci_dev *dev) {}
-void disable_msi_mode(struct pci_dev *dev, int pos, int type) {}
 void pci_no_msi(void) {}
 EXPORT_SYMBOL(pci_enable_msix);
 EXPORT_SYMBOL(pci_disable_msix);
diff --git a/arch/x86_64/kernel/hpet.c b/arch/x86_64/kernel/hpet.c
index 65a0edd..8cf0b8a 100644
--- a/arch/x86_64/kernel/hpet.c
+++ b/arch/x86_64/kernel/hpet.c
@@ -12,6 +12,12 @@
 #include <asm/timex.h>
 #include <asm/hpet.h>
 
+#define HPET_MASK	0xFFFFFFFF
+#define HPET_SHIFT	22
+
+/* FSEC = 10^-15 NSEC = 10^-9 */
+#define FSEC_PER_NSEC	1000000
+
 int nohpet __initdata;
 
 unsigned long hpet_address;
@@ -106,9 +112,31 @@
 	return 0;
 }
 
+static cycle_t read_hpet(void)
+{
+	return (cycle_t)hpet_readl(HPET_COUNTER);
+}
+
+static cycle_t __vsyscall_fn vread_hpet(void)
+{
+	return readl((void __iomem *)fix_to_virt(VSYSCALL_HPET) + 0xf0);
+}
+
+struct clocksource clocksource_hpet = {
+	.name		= "hpet",
+	.rating		= 250,
+	.read		= read_hpet,
+	.mask		= (cycle_t)HPET_MASK,
+	.mult		= 0, /* set below */
+	.shift		= HPET_SHIFT,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+	.vread		= vread_hpet,
+};
+
 int hpet_arch_init(void)
 {
 	unsigned int id;
+	u64 tmp;
 
 	if (!hpet_address)
 		return -1;
@@ -132,6 +160,22 @@
 
 	hpet_use_timer = (id & HPET_ID_LEGSUP);
 
+	/*
+	 * hpet period is in femto seconds per cycle
+	 * so we need to convert this to ns/cyc units
+	 * aproximated by mult/2^shift
+	 *
+	 *  fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift
+	 *  fsec/cyc * 1ns/1000000fsec * 2^shift = mult
+	 *  fsec/cyc * 2^shift * 1nsec/1000000fsec = mult
+	 *  (fsec/cyc << shift)/1000000 = mult
+	 *  (hpet_period << shift)/FSEC_PER_NSEC = mult
+	 */
+	tmp = (u64)hpet_period << HPET_SHIFT;
+	do_div(tmp, FSEC_PER_NSEC);
+	clocksource_hpet.mult = (u32)tmp;
+	clocksource_register(&clocksource_hpet);
+
 	return hpet_timer_stop_set_go(hpet_tick);
 }
 
@@ -444,68 +488,3 @@
 }
 
 __setup("nohpet", nohpet_setup);
-
-#define HPET_MASK	0xFFFFFFFF
-#define HPET_SHIFT	22
-
-/* FSEC = 10^-15 NSEC = 10^-9 */
-#define FSEC_PER_NSEC	1000000
-
-static void *hpet_ptr;
-
-static cycle_t read_hpet(void)
-{
-	return (cycle_t)readl(hpet_ptr);
-}
-
-static cycle_t __vsyscall_fn vread_hpet(void)
-{
-	return readl((void __iomem *)fix_to_virt(VSYSCALL_HPET) + 0xf0);
-}
-
-struct clocksource clocksource_hpet = {
-	.name		= "hpet",
-	.rating		= 250,
-	.read		= read_hpet,
-	.mask		= (cycle_t)HPET_MASK,
-	.mult		= 0, /* set below */
-	.shift		= HPET_SHIFT,
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-	.vread		= vread_hpet,
-};
-
-static int __init init_hpet_clocksource(void)
-{
-	unsigned long hpet_period;
-	void __iomem *hpet_base;
-	u64 tmp;
-
-	if (!hpet_address)
-		return -ENODEV;
-
-	/* calculate the hpet address: */
-	hpet_base = ioremap_nocache(hpet_address, HPET_MMAP_SIZE);
-	hpet_ptr = hpet_base + HPET_COUNTER;
-
-	/* calculate the frequency: */
-	hpet_period = readl(hpet_base + HPET_PERIOD);
-
-	/*
-	 * hpet period is in femto seconds per cycle
-	 * so we need to convert this to ns/cyc units
-	 * aproximated by mult/2^shift
-	 *
-	 *  fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift
-	 *  fsec/cyc * 1ns/1000000fsec * 2^shift = mult
-	 *  fsec/cyc * 2^shift * 1nsec/1000000fsec = mult
-	 *  (fsec/cyc << shift)/1000000 = mult
-	 *  (hpet_period << shift)/FSEC_PER_NSEC = mult
-	 */
-	tmp = (u64)hpet_period << HPET_SHIFT;
-	do_div(tmp, FSEC_PER_NSEC);
-	clocksource_hpet.mult = (u32)tmp;
-
-	return clocksource_register(&clocksource_hpet);
-}
-
-module_init(init_hpet_clocksource);
diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c
index 0a91368..c6a5bc7 100644
--- a/arch/x86_64/kernel/io_apic.c
+++ b/arch/x86_64/kernel/io_apic.c
@@ -789,7 +789,6 @@
 	struct irq_cfg *cfg = irq_cfg + irq;
 	struct IO_APIC_route_entry entry;
 	cpumask_t mask;
-	unsigned long flags;
 
 	if (!IO_APIC_IRQ(irq))
 		return;
diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c
index c9addcf..75d73a9 100644
--- a/arch/x86_64/kernel/time.c
+++ b/arch/x86_64/kernel/time.c
@@ -358,6 +358,8 @@
 	set_cyc2ns_scale(cpu_khz);
 	printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n",
 		cpu_khz / 1000, cpu_khz % 1000);
+	init_tsc_clocksource();
+
 	setup_irq(0, &irq0);
 }
 
diff --git a/arch/x86_64/kernel/tsc.c b/arch/x86_64/kernel/tsc.c
index 8958318..1a0edbb 100644
--- a/arch/x86_64/kernel/tsc.c
+++ b/arch/x86_64/kernel/tsc.c
@@ -210,7 +210,7 @@
 }
 EXPORT_SYMBOL_GPL(mark_tsc_unstable);
 
-static int __init init_tsc_clocksource(void)
+void __init init_tsc_clocksource(void)
 {
 	if (!notsc) {
 		clocksource_tsc.mult = clocksource_khz2mult(cpu_khz,
@@ -218,9 +218,6 @@
 		if (check_tsc_unstable())
 			clocksource_tsc.rating = 0;
 
-		return clocksource_register(&clocksource_tsc);
+		clocksource_register(&clocksource_tsc);
 	}
-	return 0;
 }
-
-module_init(init_tsc_clocksource);
diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c
index dc13eba..44cd7b2 100644
--- a/drivers/cdrom/viocd.c
+++ b/drivers/cdrom/viocd.c
@@ -376,6 +376,25 @@
 	return 0;
 }
 
+static void viocd_end_request(struct request *req, int uptodate)
+{
+	int nsectors = req->hard_nr_sectors;
+
+	/*
+	 * Make sure it's fully ended, and ensure that we process
+	 * at least one sector.
+	 */
+	if (blk_pc_request(req))
+		nsectors = (req->data_len + 511) >> 9;
+	if (!nsectors)
+		nsectors = 1;
+
+	if (end_that_request_first(req, uptodate, nsectors))
+		BUG();
+	add_disk_randomness(req->rq_disk);
+	blkdev_dequeue_request(req);
+	end_that_request_last(req, uptodate);
+}
 
 static int rwreq;
 
@@ -385,11 +404,11 @@
 
 	while ((rwreq == 0) && ((req = elv_next_request(q)) != NULL)) {
 		if (!blk_fs_request(req))
-			end_request(req, 0);
+			viocd_end_request(req, 0);
 		else if (send_request(req) < 0) {
 			printk(VIOCD_KERN_WARNING
 					"unable to send message to OS/400!");
-			end_request(req, 0);
+			viocd_end_request(req, 0);
 		} else
 			rwreq++;
 	}
@@ -601,9 +620,9 @@
 					"with rc %d:0x%04X: %s\n",
 					req, event->xRc,
 					bevent->sub_result, err->msg);
-			end_request(req, 0);
+			viocd_end_request(req, 0);
 		} else
-			end_request(req, 1);
+			viocd_end_request(req, 1);
 
 		/* restart handling of incoming requests */
 		spin_unlock_irqrestore(&viocd_reqlock, flags);
diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c
index 54df355..16dc5d1 100644
--- a/drivers/char/cyclades.c
+++ b/drivers/char/cyclades.c
@@ -3501,6 +3501,7 @@
 	tmp.irq = cinfo->irq;
 	tmp.flags = info->flags;
 	tmp.close_delay = info->close_delay;
+	tmp.closing_wait = info->closing_wait;
 	tmp.baud_base = info->baud;
 	tmp.custom_divisor = info->custom_divisor;
 	tmp.hub6 = 0;		/*!!! */
diff --git a/drivers/char/epca.c b/drivers/char/epca.c
index 88fc24f..de5be30 100644
--- a/drivers/char/epca.c
+++ b/drivers/char/epca.c
@@ -209,7 +209,6 @@
 static void setup_empty_event(struct tty_struct *tty, struct channel *ch);
 void epca_setup(char *, int *);
 
-static int get_termio(struct tty_struct *, struct termio __user *);
 static int pc_write(struct tty_struct *, const unsigned char *, int);
 static int pc_init(void);
 static int init_PCI(void);
@@ -2362,15 +2361,6 @@
 
 	switch (cmd) 
 	{ /* Begin switch cmd */
-
-#if 0	/* Handled by calling layer properly */
-		case TCGETS:
-			if (copy_to_user(argp, tty->termios, sizeof(struct ktermios)))
-				return -EFAULT;
-			return 0;
-		case TCGETA:
-			return get_termio(tty, argp);
-#endif
 		case TCSBRK:	/* SVID version: non-zero arg --> no break */
 			retval = tty_check_change(tty);
 			if (retval)
@@ -2735,13 +2725,6 @@
 	memoff(ch);
 } /* End setup_empty_event */
 
-/* --------------------- Begin get_termio ----------------------- */
-
-static int get_termio(struct tty_struct * tty, struct termio __user * termio)
-{ /* Begin get_termio */
-	return kernel_termios_to_user_termio(termio, tty->termios);
-} /* End get_termio */
-
 /* ---------------------- Begin epca_setup  -------------------------- */
 void epca_setup(char *str, int *ints)
 { /* Begin epca_setup */
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index a7b33d2..e221465 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -2478,6 +2478,11 @@
 		if (!info)
 			return;
 
+#ifdef CONFIG_PPC_MERGE
+		if (check_legacy_ioport(ipmi_defaults[i].port))
+			continue;
+#endif
+
 		info->addr_source = NULL;
 
 		info->si_type = ipmi_defaults[i].type;
diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c
index ccaa6a3..d42060e 100644
--- a/drivers/clocksource/acpi_pm.c
+++ b/drivers/clocksource/acpi_pm.c
@@ -214,4 +214,7 @@
 	return clocksource_register(&clocksource_acpi_pm);
 }
 
-module_init(init_acpi_pm_clocksource);
+/* We use fs_initcall because we want the PCI fixups to have run
+ * but we still need to load before device_initcall
+ */
+fs_initcall(init_acpi_pm_clocksource);
diff --git a/drivers/clocksource/cyclone.c b/drivers/clocksource/cyclone.c
index 4f3925c..1bde303 100644
--- a/drivers/clocksource/cyclone.c
+++ b/drivers/clocksource/cyclone.c
@@ -116,4 +116,4 @@
 	return clocksource_register(&clocksource_cyclone);
 }
 
-module_init(init_cyclone_clocksource);
+arch_initcall(init_cyclone_clocksource);
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 6450968..f17e9c7 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -215,14 +215,16 @@
 	  module will be called aaed2000_kbd.
 
 config KEYBOARD_GPIO
-	tristate "Buttons on CPU GPIOs (PXA)"
-	depends on (ARCH_SA1100 || ARCH_PXA || ARCH_S3C2410)
+	tristate "GPIO Buttons"
+	depends on GENERIC_GPIO
 	help
 	  This driver implements support for buttons connected
-	  directly to GPIO pins of SA1100, PXA or S3C24xx CPUs.
+	  to GPIO pins of various CPUs (and some other chips).
 
 	  Say Y here if your device has buttons connected
-	  directly to GPIO pins of the CPU.
+	  directly to such GPIO pins.  Your board-specific
+	  setup logic must also provide a platform device,
+	  with configuration data saying which GPIOs are used.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called gpio-keys.
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index fa03a00..ccf6df3 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -23,11 +23,9 @@
 #include <linux/platform_device.h>
 #include <linux/input.h>
 #include <linux/irq.h>
+#include <linux/gpio_keys.h>
 
 #include <asm/gpio.h>
-#include <asm/arch/hardware.h>
-
-#include <asm/hardware/gpio_keys.h>
 
 static irqreturn_t gpio_keys_isr(int irq, void *dev_id)
 {
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index d247429..54a1ad5 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -3071,7 +3071,7 @@
 		release_stripe(sh);
 	}
 	spin_lock_irq(&conf->device_lock);
-	conf->expand_progress = (sector_nr + i)*(conf->raid_disks-1);
+	conf->expand_progress = (sector_nr + i) * new_data_disks;
 	spin_unlock_irq(&conf->device_lock);
 	/* Ok, those stripe are ready. We can start scheduling
 	 * reads on the source stripes.
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 68555c1..01869b1 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -38,6 +38,36 @@
 	return 0;
 }
 
+static void msi_set_enable(struct pci_dev *dev, int enable)
+{
+	int pos;
+	u16 control;
+
+	pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
+	if (pos) {
+		pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control);
+		control &= ~PCI_MSI_FLAGS_ENABLE;
+		if (enable)
+			control |= PCI_MSI_FLAGS_ENABLE;
+		pci_write_config_word(dev, pos + PCI_MSI_FLAGS, control);
+	}
+}
+
+static void msix_set_enable(struct pci_dev *dev, int enable)
+{
+	int pos;
+	u16 control;
+
+	pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
+	if (pos) {
+		pci_read_config_word(dev, pos + PCI_MSIX_FLAGS, &control);
+		control &= ~PCI_MSIX_FLAGS_ENABLE;
+		if (enable)
+			control |= PCI_MSIX_FLAGS_ENABLE;
+		pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control);
+	}
+}
+
 static void msi_set_mask_bit(unsigned int irq, int flag)
 {
 	struct msi_desc *entry;
@@ -55,6 +85,8 @@
 			mask_bits &= ~(1);
 			mask_bits |= flag;
 			pci_write_config_dword(entry->dev, pos, mask_bits);
+		} else {
+			msi_set_enable(entry->dev, !flag);
 		}
 		break;
 	case PCI_CAP_ID_MSIX:
@@ -192,44 +224,6 @@
 	return entry;
 }
 
-static void enable_msi_mode(struct pci_dev *dev, int pos, int type)
-{
-	u16 control;
-
-	pci_read_config_word(dev, msi_control_reg(pos), &control);
-	if (type == PCI_CAP_ID_MSI) {
-		/* Set enabled bits to single MSI & enable MSI_enable bit */
-		msi_enable(control, 1);
-		pci_write_config_word(dev, msi_control_reg(pos), control);
-		dev->msi_enabled = 1;
-	} else {
-		msix_enable(control);
-		pci_write_config_word(dev, msi_control_reg(pos), control);
-		dev->msix_enabled = 1;
-	}
-
-	pci_intx(dev, 0);  /* disable intx */
-}
-
-void disable_msi_mode(struct pci_dev *dev, int pos, int type)
-{
-	u16 control;
-
-	pci_read_config_word(dev, msi_control_reg(pos), &control);
-	if (type == PCI_CAP_ID_MSI) {
-		/* Set enabled bits to single MSI & enable MSI_enable bit */
-		msi_disable(control);
-		pci_write_config_word(dev, msi_control_reg(pos), control);
-		dev->msi_enabled = 0;
-	} else {
-		msix_disable(control);
-		pci_write_config_word(dev, msi_control_reg(pos), control);
-		dev->msix_enabled = 0;
-	}
-
-	pci_intx(dev, 1);  /* enable intx */
-}
-
 #ifdef CONFIG_PM
 static int __pci_save_msi_state(struct pci_dev *dev)
 {
@@ -238,12 +232,11 @@
 	struct pci_cap_saved_state *save_state;
 	u32 *cap;
 
-	pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
-	if (pos <= 0 || dev->no_msi)
+	if (!dev->msi_enabled)
 		return 0;
 
-	pci_read_config_word(dev, msi_control_reg(pos), &control);
-	if (!(control & PCI_MSI_FLAGS_ENABLE))
+	pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
+	if (pos <= 0)
 		return 0;
 
 	save_state = kzalloc(sizeof(struct pci_cap_saved_state) + sizeof(u32) * 5,
@@ -276,13 +269,18 @@
 	struct pci_cap_saved_state *save_state;
 	u32 *cap;
 
+	if (!dev->msi_enabled)
+		return;
+
 	save_state = pci_find_saved_cap(dev, PCI_CAP_ID_MSI);
 	pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
 	if (!save_state || pos <= 0)
 		return;
 	cap = &save_state->data[0];
 
+	pci_intx(dev, 0);		/* disable intx */
 	control = cap[i++] >> 16;
+	msi_set_enable(dev, 0);
 	pci_write_config_dword(dev, pos + PCI_MSI_ADDRESS_LO, cap[i++]);
 	if (control & PCI_MSI_FLAGS_64BIT) {
 		pci_write_config_dword(dev, pos + PCI_MSI_ADDRESS_HI, cap[i++]);
@@ -292,7 +290,6 @@
 	if (control & PCI_MSI_FLAGS_MASKBIT)
 		pci_write_config_dword(dev, pos + PCI_MSI_MASK_BIT, cap[i++]);
 	pci_write_config_word(dev, pos + PCI_MSI_FLAGS, control);
-	enable_msi_mode(dev, pos, PCI_CAP_ID_MSI);
 	pci_remove_saved_cap(save_state);
 	kfree(save_state);
 }
@@ -308,13 +305,11 @@
 		return 0;
 
 	pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
-	if (pos <= 0 || dev->no_msi)
+	if (pos <= 0)
 		return 0;
 
 	/* save the capability */
 	pci_read_config_word(dev, msi_control_reg(pos), &control);
-	if (!(control & PCI_MSIX_FLAGS_ENABLE))
-		return 0;
 	save_state = kzalloc(sizeof(struct pci_cap_saved_state) + sizeof(u16),
 		GFP_KERNEL);
 	if (!save_state) {
@@ -376,6 +371,8 @@
 		return;
 
 	/* route the table */
+	pci_intx(dev, 0);		/* disable intx */
+	msix_set_enable(dev, 0);
 	irq = head = dev->first_msi_irq;
 	while (head != tail) {
 		entry = get_irq_msi(irq);
@@ -386,7 +383,6 @@
 	}
 
 	pci_write_config_word(dev, msi_control_reg(pos), save);
-	enable_msi_mode(dev, pos, PCI_CAP_ID_MSIX);
 }
 
 void pci_restore_msi_state(struct pci_dev *dev)
@@ -411,6 +407,8 @@
 	int pos, irq;
 	u16 control;
 
+	msi_set_enable(dev, 0);	/* Ensure msi is disabled as I set it up */
+
    	pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
 	pci_read_config_word(dev, msi_control_reg(pos), &control);
 	/* MSI Entry Initialization */
@@ -454,7 +452,9 @@
 	set_irq_msi(irq, entry);
 
 	/* Set MSI enabled bits	 */
-	enable_msi_mode(dev, pos, PCI_CAP_ID_MSI);
+	pci_intx(dev, 0);		/* disable intx */
+	msi_set_enable(dev, 1);
+	dev->msi_enabled = 1;
 
 	dev->irq = irq;
 	return 0;
@@ -481,6 +481,8 @@
 	u8 bir;
 	void __iomem *base;
 
+	msix_set_enable(dev, 0);/* Ensure msix is disabled as I set it up */
+
    	pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
 	/* Request & Map MSI-X table region */
  	pci_read_config_word(dev, msi_control_reg(pos), &control);
@@ -549,7 +551,9 @@
 	}
 	dev->first_msi_irq = entries[0].vector;
 	/* Set MSI-X enabled bits */
-	enable_msi_mode(dev, pos, PCI_CAP_ID_MSIX);
+	pci_intx(dev, 0);		/* disable intx */
+	msix_set_enable(dev, 1);
+	dev->msix_enabled = 1;
 
 	return 0;
 }
@@ -611,12 +615,11 @@
 	WARN_ON(!!dev->msi_enabled);
 
 	/* Check whether driver already requested for MSI-X irqs */
-	pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
-	if (pos > 0 && dev->msix_enabled) {
-			printk(KERN_INFO "PCI: %s: Can't enable MSI.  "
-			       "Device already has MSI-X enabled\n",
-			       pci_name(dev));
-			return -EINVAL;
+	if (dev->msix_enabled) {
+		printk(KERN_INFO "PCI: %s: Can't enable MSI.  "
+			"Device already has MSI-X enabled\n",
+			pci_name(dev));
+		return -EINVAL;
 	}
 	status = msi_capability_init(dev);
 	return status;
@@ -625,8 +628,7 @@
 void pci_disable_msi(struct pci_dev* dev)
 {
 	struct msi_desc *entry;
-	int pos, default_irq;
-	u16 control;
+	int default_irq;
 
 	if (!pci_msi_enable)
 		return;
@@ -636,16 +638,9 @@
 	if (!dev->msi_enabled)
 		return;
 
-	pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
-	if (!pos)
-		return;
-
-	pci_read_config_word(dev, msi_control_reg(pos), &control);
-	if (!(control & PCI_MSI_FLAGS_ENABLE))
-		return;
-
-
-	disable_msi_mode(dev, pos, PCI_CAP_ID_MSI);
+	msi_set_enable(dev, 0);
+	pci_intx(dev, 1);		/* enable intx */
+	dev->msi_enabled = 0;
 
 	entry = get_irq_msi(dev->first_msi_irq);
 	if (!entry || !entry->dev || entry->msi_attrib.type != PCI_CAP_ID_MSI) {
@@ -746,8 +741,7 @@
 	WARN_ON(!!dev->msix_enabled);
 
 	/* Check whether driver already requested for MSI irq */
-   	if (pci_find_capability(dev, PCI_CAP_ID_MSI) > 0 &&
-		dev->msi_enabled) {
+   	if (dev->msi_enabled) {
 		printk(KERN_INFO "PCI: %s: Can't enable MSI-X.  "
 		       "Device already has an MSI irq assigned\n",
 		       pci_name(dev));
@@ -760,8 +754,6 @@
 void pci_disable_msix(struct pci_dev* dev)
 {
 	int irq, head, tail = 0, warning = 0;
-	int pos;
-	u16 control;
 
 	if (!pci_msi_enable)
 		return;
@@ -771,15 +763,9 @@
 	if (!dev->msix_enabled)
 		return;
 
-	pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
-	if (!pos)
-		return;
-
-	pci_read_config_word(dev, msi_control_reg(pos), &control);
-	if (!(control & PCI_MSIX_FLAGS_ENABLE))
-		return;
-
-	disable_msi_mode(dev, pos, PCI_CAP_ID_MSIX);
+	msix_set_enable(dev, 0);
+	pci_intx(dev, 1);		/* enable intx */
+	dev->msix_enabled = 0;
 
 	irq = head = dev->first_msi_irq;
 	while (head != tail) {
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 1e74e1e..df49530 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -881,13 +881,6 @@
 	if (atomic_sub_return(1, &dev->enable_cnt) != 0)
 		return;
 
-	if (dev->msi_enabled)
-		disable_msi_mode(dev, pci_find_capability(dev, PCI_CAP_ID_MSI),
-			PCI_CAP_ID_MSI);
-	if (dev->msix_enabled)
-		disable_msi_mode(dev, pci_find_capability(dev, PCI_CAP_ID_MSI),
-			PCI_CAP_ID_MSIX);
-
 	pci_read_config_word(dev, PCI_COMMAND, &pci_command);
 	if (pci_command & PCI_COMMAND_MASTER) {
 		pci_command &= ~PCI_COMMAND_MASTER;
@@ -1277,6 +1270,33 @@
 	}
 }
 
+/**
+ * pci_msi_off - disables any msi or msix capabilities
+ * @pdev: the PCI device to operate on
+ *
+ * If you want to use msi see pci_enable_msi and friends.
+ * This is a lower level primitive that allows us to disable
+ * msi operation at the device level.
+ */
+void pci_msi_off(struct pci_dev *dev)
+{
+	int pos;
+	u16 control;
+
+	pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
+	if (pos) {
+		pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control);
+		control &= ~PCI_MSI_FLAGS_ENABLE;
+		pci_write_config_word(dev, pos + PCI_MSI_FLAGS, control);
+	}
+	pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
+	if (pos) {
+		pci_read_config_word(dev, pos + PCI_MSIX_FLAGS, &control);
+		control &= ~PCI_MSIX_FLAGS_ENABLE;
+		pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control);
+	}
+}
+
 #ifndef HAVE_ARCH_PCI_SET_DMA_MASK
 /*
  * These can be overridden by arch-specific implementations
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index a4f2d58..ae7a975 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -46,10 +46,8 @@
 extern unsigned int pci_pm_d3_delay;
 
 #ifdef CONFIG_PCI_MSI
-void disable_msi_mode(struct pci_dev *dev, int pos, int type);
 void pci_no_msi(void);
 #else
-static inline void disable_msi_mode(struct pci_dev *dev, int pos, int type) { }
 static inline void pci_no_msi(void) { }
 #endif
 
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 1bf5482..7f94fc0 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1438,8 +1438,8 @@
  */
 static void __devinit quirk_pcie_pxh(struct pci_dev *dev)
 {
-	disable_msi_mode(dev, pci_find_capability(dev, PCI_CAP_ID_MSI),
-					PCI_CAP_ID_MSI);
+	pci_msi_off(dev);
+
 	dev->no_msi = 1;
 
 	printk(KERN_WARNING "PCI: PXH quirk detected, "
diff --git a/drivers/serial/dz.c b/drivers/serial/dz.c
index 587d87b..d31721f 100644
--- a/drivers/serial/dz.c
+++ b/drivers/serial/dz.c
@@ -170,8 +170,7 @@
  * This routine deals with inputs from any lines.
  * ------------------------------------------------------------
  */
-static inline void dz_receive_chars(struct dz_port *dport_in,
-				    struct pt_regs *regs)
+static inline void dz_receive_chars(struct dz_port *dport_in)
 {
 	struct dz_port *dport;
 	struct tty_struct *tty = NULL;
@@ -226,7 +225,7 @@
 			break;
 		}
 
-		if (uart_handle_sysrq_char(&dport->port, ch, regs))
+		if (uart_handle_sysrq_char(&dport->port, ch))
 			continue;
 
 		if ((status & dport->port.ignore_status_mask) == 0) {
@@ -332,7 +331,7 @@
 	status = dz_in(dport, DZ_CSR);
 
 	if ((status & (DZ_RDONE | DZ_RIE)) == (DZ_RDONE | DZ_RIE))
-		dz_receive_chars(dport, regs);
+		dz_receive_chars(dport);
 
 	if ((status & (DZ_TRDY | DZ_TIE)) == (DZ_TRDY | DZ_TIE))
 		dz_transmit_chars(dport);
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 7e7ec29..8e898e3 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -55,7 +55,7 @@
 #include <linux/slab.h>
 #include <linux/kthread.h>
 #include <linux/mutex.h>
-#include <linux/utsrelease.h>
+#include <linux/utsname.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
@@ -547,7 +547,7 @@
 				idesc->bInterfaceSubClass,
 				idesc->bInterfaceProtocol,
 				msgs[msg],
-				UTS_RELEASE);
+				utsname()->release);
 	}
 
 	return 0;
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index 00a5183..d7627fc 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -131,7 +131,8 @@
 #define PRINTKI(fmt, args...)	printk(KERN_INFO "atyfb: " fmt, ## args)
 #define PRINTKE(fmt, args...)	 printk(KERN_ERR "atyfb: " fmt, ## args)
 
-#if defined(CONFIG_PM) || defined(CONFIG_PMAC_BACKLIGHT) || defined (CONFIG_FB_ATY_GENERIC_LCD)
+#if defined(CONFIG_PM) || defined(CONFIG_PMAC_BACKLIGHT) || \
+defined (CONFIG_FB_ATY_GENERIC_LCD) || defined(CONFIG_FB_ATY_BACKLIGHT)
 static const u32 lt_lcd_regs[] = {
 	CONFIG_PANEL_LG,
 	LCD_GEN_CNTL_LG,
diff --git a/drivers/video/aty/mach64_ct.c b/drivers/video/aty/mach64_ct.c
index f3b487b..1fdcfdb 100644
--- a/drivers/video/aty/mach64_ct.c
+++ b/drivers/video/aty/mach64_ct.c
@@ -598,7 +598,6 @@
 	struct atyfb_par *par = info->par;
 
 	if (par->mclk_per != par->xclk_per) {
-		int i;
 		/*
 		* This disables the sclk, crashes the computer as reported:
 		* aty_st_pll_ct(SPLL_CNTL2, 3, info);
@@ -614,7 +613,7 @@
 		 * helps for Rage Mobilities that sometimes crash when
 		 * we switch to sclk. (Daniel Mantione, 13-05-2003)
 		 */
-		for (i=0;i<=0x1ffff;i++);
+		udelay(500);
 	}
 
 	aty_st_pll_ct(PLL_REF_DIV, pll->ct.pll_ref_div, par);
diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c
index 58c0ac7..0a44c44 100644
--- a/drivers/video/sm501fb.c
+++ b/drivers/video/sm501fb.c
@@ -1074,9 +1074,9 @@
 	if (len < 1)
 		return -EINVAL;
 
-	if (strnicmp(buf, "crt", sizeof("crt")) == 0)
+	if (strnicmp(buf, "crt", 3) == 0)
 		head = HEAD_CRT;
-	else if (strnicmp(buf, "panel", sizeof("panel")) == 0)
+	else if (strnicmp(buf, "panel", 5) == 0)
 		head = HEAD_PANEL;
 	else
 		return -EINVAL;
@@ -1098,7 +1098,7 @@
 	writel(ctrl, info->regs + SM501_DC_CRT_CONTROL);
 	sm501fb_sync_regs(info);
 
-	return (head == HEAD_CRT) ? 3 : 5;
+	return len;
 }
 
 /* Prepare the device_attr for registration with sysfs later */
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index 0cfff4f..e62f3fc 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -168,9 +168,9 @@
 		goto out;
 	}
 	i_size_write(inode, 0);
-	ecryptfs_write_inode_size_to_metadata(lower_file, lower_inode, inode,
-					      ecryptfs_dentry,
-					      ECRYPTFS_LOWER_I_MUTEX_NOT_HELD);
+	rc = ecryptfs_write_inode_size_to_metadata(lower_file, lower_inode,
+			inode, ecryptfs_dentry,
+			ECRYPTFS_LOWER_I_MUTEX_NOT_HELD);
 	ecryptfs_inode_to_private(inode)->crypt_stat.flags |= ECRYPTFS_NEW_FILE;
 out:
 	return rc;
diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c
index 812427e..fc4a3a2 100644
--- a/fs/ecryptfs/main.c
+++ b/fs/ecryptfs/main.c
@@ -484,18 +484,12 @@
 	struct vfsmount *lower_mnt;
 
 	memset(&nd, 0, sizeof(struct nameidata));
-	rc = path_lookup(dev_name, LOOKUP_FOLLOW, &nd);
+	rc = path_lookup(dev_name, LOOKUP_FOLLOW | LOOKUP_DIRECTORY, &nd);
 	if (rc) {
 		ecryptfs_printk(KERN_WARNING, "path_lookup() failed\n");
 		goto out;
 	}
 	lower_root = nd.dentry;
-	if (!lower_root->d_inode) {
-		ecryptfs_printk(KERN_WARNING,
-				"No directory to interpose on\n");
-		rc = -ENOENT;
-		goto out_free;
-	}
 	lower_mnt = nd.mnt;
 	ecryptfs_set_superblock_lower(sb, lower_root->d_sb);
 	sb->s_maxbytes = lower_root->d_sb->s_maxbytes;
diff --git a/fs/ecryptfs/mmap.c b/fs/ecryptfs/mmap.c
index 7be8e91..b731b09 100644
--- a/fs/ecryptfs/mmap.c
+++ b/fs/ecryptfs/mmap.c
@@ -446,6 +446,7 @@
 	const struct address_space_operations *lower_a_ops;
 	u64 file_size;
 
+retry:
 	header_page = grab_cache_page(lower_inode->i_mapping, 0);
 	if (!header_page) {
 		ecryptfs_printk(KERN_ERR, "grab_cache_page for "
@@ -456,9 +457,10 @@
 	lower_a_ops = lower_inode->i_mapping->a_ops;
 	rc = lower_a_ops->prepare_write(lower_file, header_page, 0, 8);
 	if (rc) {
-		if (rc == AOP_TRUNCATED_PAGE)
+		if (rc == AOP_TRUNCATED_PAGE) {
 			ecryptfs_release_lower_page(header_page, 0);
-		else
+			goto retry;
+		} else
 			ecryptfs_release_lower_page(header_page, 1);
 		goto out;
 	}
@@ -473,9 +475,10 @@
 	if (rc < 0)
 		ecryptfs_printk(KERN_ERR, "Error commiting header page "
 				"write\n");
-	if (rc == AOP_TRUNCATED_PAGE)
+	if (rc == AOP_TRUNCATED_PAGE) {
 		ecryptfs_release_lower_page(header_page, 0);
-	else
+		goto retry;
+	} else
 		ecryptfs_release_lower_page(header_page, 1);
 	lower_inode->i_mtime = lower_inode->i_ctime = CURRENT_TIME;
 	mark_inode_dirty_sync(inode);
@@ -502,7 +505,8 @@
 		goto out;
 	}
 	lower_dentry = ecryptfs_dentry_to_lower(ecryptfs_dentry);
-	if (!lower_dentry->d_inode->i_op->getxattr) {
+	if (!lower_dentry->d_inode->i_op->getxattr ||
+			!lower_dentry->d_inode->i_op->setxattr) {
 		printk(KERN_WARNING
 		       "No support for setting xattr in lower filesystem\n");
 		rc = -ENOSYS;
@@ -564,6 +568,7 @@
 {
 	int rc = 0;
 
+retry:
 	*lower_page = grab_cache_page(lower_inode->i_mapping, lower_page_index);
 	if (!(*lower_page)) {
 		rc = -EINVAL;
@@ -577,18 +582,18 @@
 							  byte_offset,
 							  region_bytes);
 	if (rc) {
-		ecryptfs_printk(KERN_ERR, "prepare_write for "
+		if (rc == AOP_TRUNCATED_PAGE) {
+			ecryptfs_release_lower_page(*lower_page, 0);
+			goto retry;
+		} else {
+			ecryptfs_printk(KERN_ERR, "prepare_write for "
 				"lower_page_index = [0x%.16x] failed; rc = "
 				"[%d]\n", lower_page_index, rc);
+			ecryptfs_release_lower_page(*lower_page, 1);
+			(*lower_page) = NULL;
+		}
 	}
 out:
-	if (rc && (*lower_page)) {
-		if (rc == AOP_TRUNCATED_PAGE)
-			ecryptfs_release_lower_page(*lower_page, 0);
-		else
-			ecryptfs_release_lower_page(*lower_page, 1);
-		(*lower_page) = NULL;
-	}
 	return rc;
 }
 
diff --git a/fs/libfs.c b/fs/libfs.c
index cf79196..d93842d 100644
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -190,6 +190,10 @@
 	.lookup		= simple_lookup,
 };
 
+static const struct super_operations simple_super_operations = {
+	.statfs		= simple_statfs,
+};
+
 /*
  * Common helper for pseudo-filesystems (sockfs, pipefs, bdev - stuff that
  * will never be mountable)
@@ -199,7 +203,6 @@
 	struct vfsmount *mnt)
 {
 	struct super_block *s = sget(fs_type, NULL, set_anon_super, NULL);
-	static const struct super_operations default_ops = {.statfs = simple_statfs};
 	struct dentry *dentry;
 	struct inode *root;
 	struct qstr d_name = {.name = name, .len = strlen(name)};
@@ -212,7 +215,7 @@
 	s->s_blocksize = 1024;
 	s->s_blocksize_bits = 10;
 	s->s_magic = magic;
-	s->s_op = ops ? ops : &default_ops;
+	s->s_op = ops ? ops : &simple_super_operations;
 	s->s_time_gran = 1;
 	root = new_inode(s);
 	if (!root)
@@ -359,7 +362,6 @@
 
 int simple_fill_super(struct super_block *s, int magic, struct tree_descr *files)
 {
-	static struct super_operations s_ops = {.statfs = simple_statfs};
 	struct inode *inode;
 	struct dentry *root;
 	struct dentry *dentry;
@@ -368,7 +370,7 @@
 	s->s_blocksize = PAGE_CACHE_SIZE;
 	s->s_blocksize_bits = PAGE_CACHE_SHIFT;
 	s->s_magic = magic;
-	s->s_op = &s_ops;
+	s->s_op = &simple_super_operations;
 	s->s_time_gran = 1;
 
 	inode = new_inode(s);
diff --git a/include/asm-i386/delay.h b/include/asm-i386/delay.h
index 32d6678..9ae5e37 100644
--- a/include/asm-i386/delay.h
+++ b/include/asm-i386/delay.h
@@ -16,13 +16,6 @@
 extern void __const_udelay(unsigned long usecs);
 extern void __delay(unsigned long loops);
 
-#if defined(CONFIG_PARAVIRT) && !defined(USE_REAL_TIME_DELAY)
-#define udelay(n) paravirt_ops.const_udelay((n) * 0x10c7ul)
-
-#define ndelay(n) paravirt_ops.const_udelay((n) * 5ul)
-
-#else /* !PARAVIRT || USE_REAL_TIME_DELAY */
-
 /* 0x10c7 is 2**32 / 1000000 (rounded up) */
 #define udelay(n) (__builtin_constant_p(n) ? \
 	((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 0x10c7ul)) : \
@@ -32,7 +25,6 @@
 #define ndelay(n) (__builtin_constant_p(n) ? \
 	((n) > 20000 ? __bad_ndelay() : __const_udelay((n) * 5ul)) : \
 	__ndelay(n))
-#endif
 
 void use_tsc_delay(void);
 
diff --git a/include/asm-i386/io_apic.h b/include/asm-i386/io_apic.h
index 059a9ff..3407640 100644
--- a/include/asm-i386/io_apic.h
+++ b/include/asm-i386/io_apic.h
@@ -3,6 +3,7 @@
 
 #include <asm/types.h>
 #include <asm/mpspec.h>
+#include <asm/apicdef.h>
 
 /*
  * Intel IO-APIC support for SMP and UP systems.
diff --git a/include/asm-i386/nmi.h b/include/asm-i386/nmi.h
index b04333e..64544cb 100644
--- a/include/asm-i386/nmi.h
+++ b/include/asm-i386/nmi.h
@@ -33,7 +33,7 @@
 
 extern atomic_t nmi_active;
 extern unsigned int nmi_watchdog;
-#define NMI_DEFAULT     -1
+#define NMI_DEFAULT     0
 #define NMI_NONE	0
 #define NMI_IO_APIC	1
 #define NMI_LOCAL_APIC	2
diff --git a/include/asm-i386/paravirt.h b/include/asm-i386/paravirt.h
index 6317e0a..f8319ca 100644
--- a/include/asm-i386/paravirt.h
+++ b/include/asm-i386/paravirt.h
@@ -94,6 +94,8 @@
 
 	u64 (*read_tsc)(void);
 	u64 (*read_pmc)(void);
+ 	u64 (*get_scheduled_cycles)(void);
+	unsigned long (*get_cpu_khz)(void);
 
 	void (*load_tr_desc)(void);
 	void (*load_gdt)(const struct Xgt_desc_struct *);
@@ -115,7 +117,6 @@
 	void (*set_iopl_mask)(unsigned mask);
 
 	void (*io_delay)(void);
-	void (*const_udelay)(unsigned long loops);
 
 #ifdef CONFIG_X86_LOCAL_APIC
 	void (*apic_write)(unsigned long reg, unsigned long v);
@@ -129,6 +130,8 @@
 	void (*flush_tlb_kernel)(void);
 	void (*flush_tlb_single)(u32 addr);
 
+	void (fastcall *map_pt_hook)(int type, pte_t *va, u32 pfn);
+
 	void (*alloc_pt)(u32 pfn);
 	void (*alloc_pd)(u32 pfn);
 	void (*alloc_pd_clone)(u32 pfn, u32 clonepfn, u32 start, u32 count);
@@ -183,9 +186,9 @@
 	return paravirt_ops.set_wallclock(nowtime);
 }
 
-static inline void do_time_init(void)
+static inline void (*choose_time_init(void))(void)
 {
-	return paravirt_ops.time_init();
+	return paravirt_ops.time_init;
 }
 
 /* The paravirtualized CPUID instruction. */
@@ -273,6 +276,9 @@
 
 #define rdtscll(val) (val = paravirt_ops.read_tsc())
 
+#define get_scheduled_cycles(val) (val = paravirt_ops.get_scheduled_cycles())
+#define calculate_cpu_khz() (paravirt_ops.get_cpu_khz())
+
 #define write_tsc(val1,val2) wrmsr(0x10, val1, val2)
 
 #define rdpmc(counter,low,high) do {				\
@@ -349,6 +355,8 @@
 #define __flush_tlb_global() paravirt_ops.flush_tlb_kernel()
 #define __flush_tlb_single(addr) paravirt_ops.flush_tlb_single(addr)
 
+#define paravirt_map_pt_hook(type, va, pfn) paravirt_ops.map_pt_hook(type, va, pfn)
+
 #define paravirt_alloc_pt(pfn) paravirt_ops.alloc_pt(pfn)
 #define paravirt_release_pt(pfn) paravirt_ops.release_pt(pfn)
 
diff --git a/include/asm-i386/pgtable.h b/include/asm-i386/pgtable.h
index e6a4723..c3b58d4 100644
--- a/include/asm-i386/pgtable.h
+++ b/include/asm-i386/pgtable.h
@@ -263,6 +263,7 @@
  */
 #define pte_update(mm, addr, ptep)		do { } while (0)
 #define pte_update_defer(mm, addr, ptep)	do { } while (0)
+#define paravirt_map_pt_hook(slot, va, pfn)	do { } while (0)
 #endif
 
 /*
@@ -469,10 +470,24 @@
 #endif
 
 #if defined(CONFIG_HIGHPTE)
-#define pte_offset_map(dir, address) \
-	((pte_t *)kmap_atomic(pmd_page(*(dir)),KM_PTE0) + pte_index(address))
-#define pte_offset_map_nested(dir, address) \
-	((pte_t *)kmap_atomic(pmd_page(*(dir)),KM_PTE1) + pte_index(address))
+#define pte_offset_map(dir, address)				\
+({								\
+	pte_t *__ptep;						\
+	unsigned pfn = pmd_val(*(dir)) >> PAGE_SHIFT;	   	\
+	__ptep = (pte_t *)kmap_atomic(pfn_to_page(pfn),KM_PTE0);\
+	paravirt_map_pt_hook(KM_PTE0,__ptep, pfn);		\
+	__ptep = __ptep + pte_index(address);			\
+	__ptep;							\
+})
+#define pte_offset_map_nested(dir, address)			\
+({								\
+	pte_t *__ptep;						\
+	unsigned pfn = pmd_val(*(dir)) >> PAGE_SHIFT;	   	\
+	__ptep = (pte_t *)kmap_atomic(pfn_to_page(pfn),KM_PTE1);\
+	paravirt_map_pt_hook(KM_PTE1,__ptep, pfn);		\
+	__ptep = __ptep + pte_index(address);			\
+	__ptep;							\
+})
 #define pte_unmap(pte) kunmap_atomic(pte, KM_PTE0)
 #define pte_unmap_nested(pte) kunmap_atomic(pte, KM_PTE1)
 #else
diff --git a/include/asm-i386/time.h b/include/asm-i386/time.h
index 571b429..eac0113 100644
--- a/include/asm-i386/time.h
+++ b/include/asm-i386/time.h
@@ -28,14 +28,16 @@
 	return retval;
 }
 
+extern void (*late_time_init)(void);
+extern void hpet_time_init(void);
+
 #ifdef CONFIG_PARAVIRT
 #include <asm/paravirt.h>
-extern unsigned long long native_sched_clock(void);
 #else /* !CONFIG_PARAVIRT */
 
 #define get_wallclock() native_get_wallclock()
 #define set_wallclock(x) native_set_wallclock(x)
-#define do_time_init() time_init_hook()
+#define choose_time_init() hpet_time_init
 
 #endif /* CONFIG_PARAVIRT */
 
diff --git a/include/asm-i386/timer.h b/include/asm-i386/timer.h
index 4752c3a..12dd67b 100644
--- a/include/asm-i386/timer.h
+++ b/include/asm-i386/timer.h
@@ -4,13 +4,21 @@
 #include <linux/pm.h>
 
 #define TICK_SIZE (tick_nsec / 1000)
+
 void setup_pit_timer(void);
+unsigned long long native_sched_clock(void);
+unsigned long native_calculate_cpu_khz(void);
+
 /* Modifiers for buggy PIT handling */
 extern int pit_latch_buggy;
 extern int timer_ack;
 extern int no_timer_check;
-extern unsigned long long (*custom_sched_clock)(void);
 extern int no_sync_cmos_clock;
 extern int recalibrate_cpu_khz(void);
 
+#ifndef CONFIG_PARAVIRT
+#define get_scheduled_cycles(val) rdtscll(val)
+#define calculate_cpu_khz() native_calculate_cpu_khz()
+#endif
+
 #endif
diff --git a/include/asm-i386/topology.h b/include/asm-i386/topology.h
index ac58580..7fc512d 100644
--- a/include/asm-i386/topology.h
+++ b/include/asm-i386/topology.h
@@ -85,7 +85,6 @@
 	.idle_idx		= 1,			\
 	.newidle_idx		= 2,			\
 	.wake_idx		= 1,			\
-	.per_cpu_gain		= 100,			\
 	.flags			= SD_LOAD_BALANCE	\
 				| SD_BALANCE_EXEC	\
 				| SD_BALANCE_FORK	\
diff --git a/include/asm-i386/vmi.h b/include/asm-i386/vmi.h
index 43c8933..eb8bd89 100644
--- a/include/asm-i386/vmi.h
+++ b/include/asm-i386/vmi.h
@@ -97,6 +97,7 @@
 #define VMI_CALL_SetInitialAPState	62
 #define VMI_CALL_APICWrite		63
 #define VMI_CALL_APICRead		64
+#define VMI_CALL_IODelay		65
 #define VMI_CALL_SetLazyMode		73
 
 /*
diff --git a/include/asm-i386/vmi_time.h b/include/asm-i386/vmi_time.h
index c129312..1f971eb 100644
--- a/include/asm-i386/vmi_time.h
+++ b/include/asm-i386/vmi_time.h
@@ -49,7 +49,8 @@
 extern void __init vmi_time_init(void);
 extern unsigned long vmi_get_wallclock(void);
 extern int vmi_set_wallclock(unsigned long now);
-extern unsigned long long vmi_sched_clock(void);
+extern unsigned long long vmi_get_sched_cycles(void);
+extern unsigned long vmi_cpu_khz(void);
 
 #ifdef CONFIG_X86_LOCAL_APIC
 extern void __init vmi_timer_setup_boot_alarm(void);
diff --git a/include/asm-ia64/topology.h b/include/asm-ia64/topology.h
index 22ed674..233f1ca 100644
--- a/include/asm-ia64/topology.h
+++ b/include/asm-ia64/topology.h
@@ -65,7 +65,6 @@
 	.max_interval		= 4,			\
 	.busy_factor		= 64,			\
 	.imbalance_pct		= 125,			\
-	.per_cpu_gain		= 100,			\
 	.cache_nice_tries	= 2,			\
 	.busy_idx		= 2,			\
 	.idle_idx		= 1,			\
@@ -97,7 +96,6 @@
 	.newidle_idx		= 0, /* unused */	\
 	.wake_idx		= 1,			\
 	.forkexec_idx		= 1,			\
-	.per_cpu_gain		= 100,			\
 	.flags			= SD_LOAD_BALANCE	\
 				| SD_BALANCE_EXEC	\
 				| SD_BALANCE_FORK	\
diff --git a/include/asm-mips/mach-ip27/topology.h b/include/asm-mips/mach-ip27/topology.h
index 44790fd..61d9be3 100644
--- a/include/asm-mips/mach-ip27/topology.h
+++ b/include/asm-mips/mach-ip27/topology.h
@@ -28,7 +28,6 @@
 	.busy_factor		= 32,			\
 	.imbalance_pct		= 125,			\
 	.cache_nice_tries	= 1,			\
-	.per_cpu_gain		= 100,			\
 	.flags			= SD_LOAD_BALANCE	\
 				| SD_BALANCE_EXEC	\
 				| SD_WAKE_BALANCE,	\
diff --git a/include/asm-powerpc/topology.h b/include/asm-powerpc/topology.h
index 6610495f..0ad21a8 100644
--- a/include/asm-powerpc/topology.h
+++ b/include/asm-powerpc/topology.h
@@ -57,7 +57,6 @@
 	.busy_factor		= 32,			\
 	.imbalance_pct		= 125,			\
 	.cache_nice_tries	= 1,			\
-	.per_cpu_gain		= 100,			\
 	.busy_idx		= 3,			\
 	.idle_idx		= 1,			\
 	.newidle_idx		= 2,			\
diff --git a/include/asm-x86_64/io_apic.h b/include/asm-x86_64/io_apic.h
index f4fb238..969d225 100644
--- a/include/asm-x86_64/io_apic.h
+++ b/include/asm-x86_64/io_apic.h
@@ -3,6 +3,7 @@
 
 #include <asm/types.h>
 #include <asm/mpspec.h>
+#include <asm/apicdef.h>
 
 /*
  * Intel IO-APIC support for SMP and UP systems.
diff --git a/include/asm-x86_64/nmi.h b/include/asm-x86_64/nmi.h
index 72375e7..ceb3d8d 100644
--- a/include/asm-x86_64/nmi.h
+++ b/include/asm-x86_64/nmi.h
@@ -64,7 +64,7 @@
 
 extern atomic_t nmi_active;
 extern unsigned int nmi_watchdog;
-#define NMI_DEFAULT	-1
+#define NMI_DEFAULT	0
 #define NMI_NONE	0
 #define NMI_IO_APIC	1
 #define NMI_LOCAL_APIC	2
diff --git a/include/asm-x86_64/topology.h b/include/asm-x86_64/topology.h
index 2facec5..4fd6fb2 100644
--- a/include/asm-x86_64/topology.h
+++ b/include/asm-x86_64/topology.h
@@ -43,7 +43,6 @@
 	.newidle_idx		= 0, 			\
 	.wake_idx		= 1,			\
 	.forkexec_idx		= 1,			\
-	.per_cpu_gain		= 100,			\
 	.flags			= SD_LOAD_BALANCE	\
 				| SD_BALANCE_FORK	\
 				| SD_BALANCE_EXEC	\
diff --git a/include/asm-x86_64/tsc.h b/include/asm-x86_64/tsc.h
index 9a0a368..26c3e98 100644
--- a/include/asm-x86_64/tsc.h
+++ b/include/asm-x86_64/tsc.h
@@ -55,6 +55,7 @@
 extern void tsc_init(void);
 extern void mark_tsc_unstable(void);
 extern int unsynchronized_tsc(void);
+extern void init_tsc_clocksource(void);
 
 /*
  * Boot-time check whether the TSCs are synchronized across
diff --git a/include/asm-arm/hardware/gpio_keys.h b/include/linux/gpio_keys.h
similarity index 100%
rename from include/asm-arm/hardware/gpio_keys.h
rename to include/linux/gpio_keys.h
diff --git a/include/linux/migrate.h b/include/linux/migrate.h
index 48148e0..75e55dc 100644
--- a/include/linux/migrate.h
+++ b/include/linux/migrate.h
@@ -5,6 +5,14 @@
 
 typedef struct page *new_page_t(struct page *, unsigned long private, int **);
 
+/* Check if a vma is migratable */
+static inline int vma_migratable(struct vm_area_struct *vma)
+{
+	if (vma->vm_flags & (VM_IO|VM_HUGETLB|VM_PFNMAP|VM_RESERVED))
+		return 0;
+	return 1;
+}
+
 #ifdef CONFIG_MIGRATION
 extern int isolate_lru_page(struct page *p, struct list_head *pagelist);
 extern int putback_lru_pages(struct list_head *l);
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 2c4b684..78417e4 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -543,6 +543,7 @@
 int __must_check pci_set_mwi(struct pci_dev *dev);
 void pci_clear_mwi(struct pci_dev *dev);
 void pci_intx(struct pci_dev *dev, int enable);
+void pci_msi_off(struct pci_dev *dev);
 int pci_set_dma_mask(struct pci_dev *dev, u64 mask);
 int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask);
 void pci_update_resource(struct pci_dev *dev, struct resource *res, int resno);
diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
index 7a6d34e..f09cce2 100644
--- a/include/linux/pci_regs.h
+++ b/include/linux/pci_regs.h
@@ -292,9 +292,10 @@
 #define PCI_MSI_DATA_64		12	/* 16 bits of data for 64-bit devices */
 #define PCI_MSI_MASK_BIT	16	/* Mask bits register */
 
-/* MSI-X registers (these are at offset PCI_MSI_FLAGS) */
-#define PCI_MSIX_FLAGS_QSIZE	0x7FF
-#define PCI_MSIX_FLAGS_ENABLE	(1 << 15)
+/* MSI-X registers (these are at offset PCI_MSIX_FLAGS) */
+#define PCI_MSIX_FLAGS		2
+#define  PCI_MSIX_FLAGS_QSIZE	0x7FF
+#define  PCI_MSIX_FLAGS_ENABLE	(1 << 15)
 #define PCI_MSIX_FLAGS_BIRMASK	(7 << 0)
 #define PCI_MSIX_FLAGS_BITMASK	(1 << 0)
 
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 6f7c9a4..49fe299 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -684,7 +684,6 @@
 	unsigned int imbalance_pct;	/* No balance until over watermark */
 	unsigned long long cache_hot_time; /* Task considered cache hot (ns) */
 	unsigned int cache_nice_tries;	/* Leave cache hot tasks for # tries */
-	unsigned int per_cpu_gain;	/* CPU % gained by adding domain cpus */
 	unsigned int busy_idx;
 	unsigned int idle_idx;
 	unsigned int newidle_idx;
diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h
index 61fef37..a946176 100644
--- a/include/linux/spinlock.h
+++ b/include/linux/spinlock.h
@@ -283,6 +283,43 @@
 })
 
 /*
+ * Locks two spinlocks l1 and l2.
+ * l1_first indicates if spinlock l1 should be taken first.
+ */
+static inline void double_spin_lock(spinlock_t *l1, spinlock_t *l2,
+				    bool l1_first)
+	__acquires(l1)
+	__acquires(l2)
+{
+	if (l1_first) {
+		spin_lock(l1);
+		spin_lock(l2);
+	} else {
+		spin_lock(l2);
+		spin_lock(l1);
+	}
+}
+
+/*
+ * Unlocks two spinlocks l1 and l2.
+ * l1_taken_first indicates if spinlock l1 was taken first and therefore
+ * should be released after spinlock l2.
+ */
+static inline void double_spin_unlock(spinlock_t *l1, spinlock_t *l2,
+				      bool l1_taken_first)
+	__releases(l1)
+	__releases(l2)
+{
+	if (l1_taken_first) {
+		spin_unlock(l2);
+		spin_unlock(l1);
+	} else {
+		spin_unlock(l1);
+		spin_unlock(l2);
+	}
+}
+
+/*
  * Pull the atomic_t declaration:
  * (asm-mips/atomic.h needs above definitions)
  */
diff --git a/include/linux/topology.h b/include/linux/topology.h
index 6c5a6e6..a9d1f04 100644
--- a/include/linux/topology.h
+++ b/include/linux/topology.h
@@ -96,7 +96,6 @@
 	.busy_factor		= 64,			\
 	.imbalance_pct		= 110,			\
 	.cache_nice_tries	= 0,			\
-	.per_cpu_gain		= 25,			\
 	.busy_idx		= 0,			\
 	.idle_idx		= 0,			\
 	.newidle_idx		= 1,			\
@@ -128,7 +127,6 @@
 	.busy_factor		= 64,			\
 	.imbalance_pct		= 125,			\
 	.cache_nice_tries	= 1,			\
-	.per_cpu_gain		= 100,			\
 	.busy_idx		= 2,			\
 	.idle_idx		= 1,			\
 	.newidle_idx		= 2,			\
@@ -159,7 +157,6 @@
 	.busy_factor		= 64,			\
 	.imbalance_pct		= 125,			\
 	.cache_nice_tries	= 1,			\
-	.per_cpu_gain		= 100,			\
 	.busy_idx		= 2,			\
 	.idle_idx		= 1,			\
 	.newidle_idx		= 2,			\
@@ -193,7 +190,6 @@
 	.newidle_idx		= 0, /* unused */	\
 	.wake_idx		= 0, /* unused */	\
 	.forkexec_idx		= 0, /* unused */	\
-	.per_cpu_gain		= 100,			\
 	.flags			= SD_LOAD_BALANCE	\
 				| SD_SERIALIZE,	\
 	.last_balance		= jiffies,		\
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index 476cb0c..de93a81 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -1355,17 +1355,16 @@
 	tick_cancel_sched_timer(cpu);
 
 	local_irq_disable();
-
-	spin_lock(&new_base->lock);
-	spin_lock(&old_base->lock);
+	double_spin_lock(&new_base->lock, &old_base->lock,
+			 smp_processor_id() < cpu);
 
 	for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) {
 		migrate_hrtimer_list(&old_base->clock_base[i],
 				     &new_base->clock_base[i]);
 	}
-	spin_unlock(&old_base->lock);
-	spin_unlock(&new_base->lock);
 
+	double_spin_unlock(&new_base->lock, &old_base->lock,
+			   smp_processor_id() < cpu);
 	local_irq_enable();
 	put_cpu_var(hrtimer_bases);
 }
diff --git a/kernel/sched.c b/kernel/sched.c
index 5f102e6..a4ca632 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -3006,23 +3006,6 @@
 }
 #endif
 
-static inline void wake_priority_sleeper(struct rq *rq)
-{
-#ifdef CONFIG_SCHED_SMT
-	if (!rq->nr_running)
-		return;
-
-	spin_lock(&rq->lock);
-	/*
-	 * If an SMT sibling task has been put to sleep for priority
-	 * reasons reschedule the idle task to see if it can now run.
-	 */
-	if (rq->nr_running)
-		resched_task(rq->idle);
-	spin_unlock(&rq->lock);
-#endif
-}
-
 DEFINE_PER_CPU(struct kernel_stat, kstat);
 
 EXPORT_PER_CPU_SYMBOL(kstat);
@@ -3239,10 +3222,7 @@
 
 	update_cpu_clock(p, rq, now);
 
-	if (p == rq->idle)
-		/* Task on the idle queue */
-		wake_priority_sleeper(rq);
-	else
+	if (p != rq->idle)
 		task_running_tick(rq, p);
 #ifdef CONFIG_SMP
 	update_load(rq);
@@ -3251,136 +3231,6 @@
 #endif
 }
 
-#ifdef CONFIG_SCHED_SMT
-static inline void wakeup_busy_runqueue(struct rq *rq)
-{
-	/* If an SMT runqueue is sleeping due to priority reasons wake it up */
-	if (rq->curr == rq->idle && rq->nr_running)
-		resched_task(rq->idle);
-}
-
-/*
- * Called with interrupt disabled and this_rq's runqueue locked.
- */
-static void wake_sleeping_dependent(int this_cpu)
-{
-	struct sched_domain *tmp, *sd = NULL;
-	int i;
-
-	for_each_domain(this_cpu, tmp) {
-		if (tmp->flags & SD_SHARE_CPUPOWER) {
-			sd = tmp;
-			break;
-		}
-	}
-
-	if (!sd)
-		return;
-
-	for_each_cpu_mask(i, sd->span) {
-		struct rq *smt_rq = cpu_rq(i);
-
-		if (i == this_cpu)
-			continue;
-		if (unlikely(!spin_trylock(&smt_rq->lock)))
-			continue;
-
-		wakeup_busy_runqueue(smt_rq);
-		spin_unlock(&smt_rq->lock);
-	}
-}
-
-/*
- * number of 'lost' timeslices this task wont be able to fully
- * utilize, if another task runs on a sibling. This models the
- * slowdown effect of other tasks running on siblings:
- */
-static inline unsigned long
-smt_slice(struct task_struct *p, struct sched_domain *sd)
-{
-	return p->time_slice * (100 - sd->per_cpu_gain) / 100;
-}
-
-/*
- * To minimise lock contention and not have to drop this_rq's runlock we only
- * trylock the sibling runqueues and bypass those runqueues if we fail to
- * acquire their lock. As we only trylock the normal locking order does not
- * need to be obeyed.
- */
-static int
-dependent_sleeper(int this_cpu, struct rq *this_rq, struct task_struct *p)
-{
-	struct sched_domain *tmp, *sd = NULL;
-	int ret = 0, i;
-
-	/* kernel/rt threads do not participate in dependent sleeping */
-	if (!p->mm || rt_task(p))
-		return 0;
-
-	for_each_domain(this_cpu, tmp) {
-		if (tmp->flags & SD_SHARE_CPUPOWER) {
-			sd = tmp;
-			break;
-		}
-	}
-
-	if (!sd)
-		return 0;
-
-	for_each_cpu_mask(i, sd->span) {
-		struct task_struct *smt_curr;
-		struct rq *smt_rq;
-
-		if (i == this_cpu)
-			continue;
-
-		smt_rq = cpu_rq(i);
-		if (unlikely(!spin_trylock(&smt_rq->lock)))
-			continue;
-
-		smt_curr = smt_rq->curr;
-
-		if (!smt_curr->mm)
-			goto unlock;
-
-		/*
-		 * If a user task with lower static priority than the
-		 * running task on the SMT sibling is trying to schedule,
-		 * delay it till there is proportionately less timeslice
-		 * left of the sibling task to prevent a lower priority
-		 * task from using an unfair proportion of the
-		 * physical cpu's resources. -ck
-		 */
-		if (rt_task(smt_curr)) {
-			/*
-			 * With real time tasks we run non-rt tasks only
-			 * per_cpu_gain% of the time.
-			 */
-			if ((jiffies % DEF_TIMESLICE) >
-				(sd->per_cpu_gain * DEF_TIMESLICE / 100))
-					ret = 1;
-		} else {
-			if (smt_curr->static_prio < p->static_prio &&
-				!TASK_PREEMPTS_CURR(p, smt_rq) &&
-				smt_slice(smt_curr, sd) > task_timeslice(p))
-					ret = 1;
-		}
-unlock:
-		spin_unlock(&smt_rq->lock);
-	}
-	return ret;
-}
-#else
-static inline void wake_sleeping_dependent(int this_cpu)
-{
-}
-static inline int
-dependent_sleeper(int this_cpu, struct rq *this_rq, struct task_struct *p)
-{
-	return 0;
-}
-#endif
-
 #if defined(CONFIG_PREEMPT) && defined(CONFIG_DEBUG_PREEMPT)
 
 void fastcall add_preempt_count(int val)
@@ -3507,7 +3357,6 @@
 		if (!rq->nr_running) {
 			next = rq->idle;
 			rq->expired_timestamp = 0;
-			wake_sleeping_dependent(cpu);
 			goto switch_tasks;
 		}
 	}
@@ -3547,8 +3396,6 @@
 		}
 	}
 	next->sleep_type = SLEEP_NORMAL;
-	if (rq->nr_running == 1 && dependent_sleeper(cpu, rq, next))
-		next = rq->idle;
 switch_tasks:
 	if (next == rq->idle)
 		schedstat_inc(rq, sched_goidle);
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index 193a079..5b0e46b 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -55,16 +55,18 @@
 static char override_name[32];
 static int finished_booting;
 
-/* clocksource_done_booting - Called near the end of bootup
+/* clocksource_done_booting - Called near the end of core bootup
  *
- * Hack to avoid lots of clocksource churn at boot time
+ * Hack to avoid lots of clocksource churn at boot time.
+ * We use fs_initcall because we want this to start before
+ * device_initcall but after subsys_initcall.
  */
 static int __init clocksource_done_booting(void)
 {
 	finished_booting = 1;
 	return 0;
 }
-late_initcall(clocksource_done_booting);
+fs_initcall(clocksource_done_booting);
 
 #ifdef CONFIG_CLOCKSOURCE_WATCHDOG
 static LIST_HEAD(watchdog_list);
diff --git a/kernel/timer.c b/kernel/timer.c
index 6663a87..8ad3842 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -1651,8 +1651,8 @@
 	new_base = get_cpu_var(tvec_bases);
 
 	local_irq_disable();
-	spin_lock(&new_base->lock);
-	spin_lock(&old_base->lock);
+	double_spin_lock(&new_base->lock, &old_base->lock,
+			 smp_processor_id() < cpu);
 
 	BUG_ON(old_base->running_timer);
 
@@ -1665,8 +1665,8 @@
 		migrate_timer_list(new_base, old_base->tv5.vec + i);
 	}
 
-	spin_unlock(&old_base->lock);
-	spin_unlock(&new_base->lock);
+	double_spin_unlock(&new_base->lock, &old_base->lock,
+			   smp_processor_id() < cpu);
 	local_irq_enable();
 	put_cpu_var(tvec_bases);
 }
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index cf2a538..d76e8eb 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -321,15 +321,6 @@
 	return 0;
 }
 
-/* Check if a vma is migratable */
-static inline int vma_migratable(struct vm_area_struct *vma)
-{
-	if (vma->vm_flags & (
-		VM_LOCKED|VM_IO|VM_HUGETLB|VM_PFNMAP|VM_RESERVED))
-		return 0;
-	return 1;
-}
-
 /*
  * Check if all pages in a range are on a set of nodes.
  * If pagelist != NULL then isolate pages from the LRU and
diff --git a/mm/migrate.c b/mm/migrate.c
index e9b161b..7a66ca2 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -781,7 +781,7 @@
 
 		err = -EFAULT;
 		vma = find_vma(mm, pp->addr);
-		if (!vma)
+		if (!vma || !vma_migratable(vma))
 			goto set_status;
 
 		page = follow_page(vma, pp->addr, FOLL_GET);
diff --git a/mm/shmem.c b/mm/shmem.c
index fcb0788..b8c429a 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -175,7 +175,7 @@
 		vm_unacct_memory(pages * VM_ACCT(PAGE_CACHE_SIZE));
 }
 
-static struct super_operations shmem_ops;
+static const struct super_operations shmem_ops;
 static const struct address_space_operations shmem_aops;
 static const struct file_operations shmem_file_operations;
 static const struct inode_operations shmem_inode_operations;
@@ -2383,7 +2383,7 @@
 #endif
 };
 
-static struct super_operations shmem_ops = {
+static const struct super_operations shmem_ops = {
 	.alloc_inode	= shmem_alloc_inode,
 	.destroy_inode	= shmem_destroy_inode,
 #ifdef CONFIG_TMPFS