pcnet32: use NET_IP_ALIGN instead of 2
Change hard coded 2 to NET_IP_ALIGN. Added new #define with comments.
Tested amd_64
Signed-off-by: Don Fry <pcnet32@verizon.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index c4b74e9..7c8da61 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -174,7 +174,11 @@
#define RX_RING_SIZE (1 << (PCNET32_LOG_RX_BUFFERS))
#define RX_MAX_RING_SIZE (1 << (PCNET32_LOG_MAX_RX_BUFFERS))
-#define PKT_BUF_SZ 1544
+#define PKT_BUF_SKB 1544
+/* actual buffer length after being aligned */
+#define PKT_BUF_SIZE (PKT_BUF_SKB - NET_IP_ALIGN)
+/* chip wants twos complement of the (aligned) buffer length */
+#define NEG_BUF_SIZE (NET_IP_ALIGN - PKT_BUF_SKB)
/* Offsets from base I/O address. */
#define PCNET32_WIO_RDP 0x10
@@ -604,7 +608,7 @@
/* now allocate any new buffers needed */
for (; new < size; new++ ) {
struct sk_buff *rx_skbuff;
- new_skb_list[new] = dev_alloc_skb(PKT_BUF_SZ);
+ new_skb_list[new] = dev_alloc_skb(PKT_BUF_SKB);
if (!(rx_skbuff = new_skb_list[new])) {
/* keep the original lists and buffers */
if (netif_msg_drv(lp))
@@ -613,20 +617,20 @@
dev->name);
goto free_all_new;
}
- skb_reserve(rx_skbuff, 2);
+ skb_reserve(rx_skbuff, NET_IP_ALIGN);
new_dma_addr_list[new] =
pci_map_single(lp->pci_dev, rx_skbuff->data,
- PKT_BUF_SZ - 2, PCI_DMA_FROMDEVICE);
+ PKT_BUF_SIZE, PCI_DMA_FROMDEVICE);
new_rx_ring[new].base = cpu_to_le32(new_dma_addr_list[new]);
- new_rx_ring[new].buf_length = cpu_to_le16(2 - PKT_BUF_SZ);
+ new_rx_ring[new].buf_length = cpu_to_le16(NEG_BUF_SIZE);
new_rx_ring[new].status = cpu_to_le16(0x8000);
}
/* and free any unneeded buffers */
for (; new < lp->rx_ring_size; new++) {
if (lp->rx_skbuff[new]) {
pci_unmap_single(lp->pci_dev, lp->rx_dma_addr[new],
- PKT_BUF_SZ - 2, PCI_DMA_FROMDEVICE);
+ PKT_BUF_SIZE, PCI_DMA_FROMDEVICE);
dev_kfree_skb(lp->rx_skbuff[new]);
}
}
@@ -651,7 +655,7 @@
for (; --new >= lp->rx_ring_size; ) {
if (new_skb_list[new]) {
pci_unmap_single(lp->pci_dev, new_dma_addr_list[new],
- PKT_BUF_SZ - 2, PCI_DMA_FROMDEVICE);
+ PKT_BUF_SIZE, PCI_DMA_FROMDEVICE);
dev_kfree_skb(new_skb_list[new]);
}
}
@@ -678,7 +682,7 @@
wmb(); /* Make sure adapter sees owner change */
if (lp->rx_skbuff[i]) {
pci_unmap_single(lp->pci_dev, lp->rx_dma_addr[i],
- PKT_BUF_SZ - 2, PCI_DMA_FROMDEVICE);
+ PKT_BUF_SIZE, PCI_DMA_FROMDEVICE);
dev_kfree_skb_any(lp->rx_skbuff[i]);
}
lp->rx_skbuff[i] = NULL;
@@ -1201,7 +1205,7 @@
pkt_len = (le32_to_cpu(rxp->msg_length) & 0xfff) - 4;
/* Discard oversize frames. */
- if (unlikely(pkt_len > PKT_BUF_SZ - 2)) {
+ if (unlikely(pkt_len > PKT_BUF_SIZE)) {
if (netif_msg_drv(lp))
printk(KERN_ERR "%s: Impossible packet size %d!\n",
dev->name, pkt_len);
@@ -1218,26 +1222,26 @@
if (pkt_len > rx_copybreak) {
struct sk_buff *newskb;
- if ((newskb = dev_alloc_skb(PKT_BUF_SZ))) {
- skb_reserve(newskb, 2);
+ if ((newskb = dev_alloc_skb(PKT_BUF_SKB))) {
+ skb_reserve(newskb, NET_IP_ALIGN);
skb = lp->rx_skbuff[entry];
pci_unmap_single(lp->pci_dev,
lp->rx_dma_addr[entry],
- PKT_BUF_SZ - 2,
+ PKT_BUF_SIZE,
PCI_DMA_FROMDEVICE);
skb_put(skb, pkt_len);
lp->rx_skbuff[entry] = newskb;
lp->rx_dma_addr[entry] =
pci_map_single(lp->pci_dev,
newskb->data,
- PKT_BUF_SZ - 2,
+ PKT_BUF_SIZE,
PCI_DMA_FROMDEVICE);
rxp->base = cpu_to_le32(lp->rx_dma_addr[entry]);
rx_in_place = 1;
} else
skb = NULL;
} else {
- skb = dev_alloc_skb(pkt_len + 2);
+ skb = dev_alloc_skb(pkt_len + NET_IP_ALIGN);
}
if (skb == NULL) {
@@ -1250,7 +1254,7 @@
}
skb->dev = dev;
if (!rx_in_place) {
- skb_reserve(skb, 2); /* 16 byte align */
+ skb_reserve(skb, NET_IP_ALIGN);
skb_put(skb, pkt_len); /* Make room */
pci_dma_sync_single_for_cpu(lp->pci_dev,
lp->rx_dma_addr[entry],
@@ -1291,7 +1295,7 @@
* The docs say that the buffer length isn't touched, but Andrew
* Boyd of QNX reports that some revs of the 79C965 clear it.
*/
- rxp->buf_length = cpu_to_le16(2 - PKT_BUF_SZ);
+ rxp->buf_length = cpu_to_le16(NEG_BUF_SIZE);
wmb(); /* Make sure owner changes after others are visible */
rxp->status = cpu_to_le16(0x8000);
entry = (++lp->cur_rx) & lp->rx_mod_mask;
@@ -2396,7 +2400,7 @@
if (rx_skbuff == NULL) {
if (!
(rx_skbuff = lp->rx_skbuff[i] =
- dev_alloc_skb(PKT_BUF_SZ))) {
+ dev_alloc_skb(PKT_BUF_SKB))) {
/* there is not much, we can do at this point */
if (netif_msg_drv(lp))
printk(KERN_ERR
@@ -2404,16 +2408,16 @@
dev->name);
return -1;
}
- skb_reserve(rx_skbuff, 2);
+ skb_reserve(rx_skbuff, NET_IP_ALIGN);
}
rmb();
if (lp->rx_dma_addr[i] == 0)
lp->rx_dma_addr[i] =
pci_map_single(lp->pci_dev, rx_skbuff->data,
- PKT_BUF_SZ - 2, PCI_DMA_FROMDEVICE);
+ PKT_BUF_SIZE, PCI_DMA_FROMDEVICE);
lp->rx_ring[i].base = cpu_to_le32(lp->rx_dma_addr[i]);
- lp->rx_ring[i].buf_length = cpu_to_le16(2 - PKT_BUF_SZ);
+ lp->rx_ring[i].buf_length = cpu_to_le16(NEG_BUF_SIZE);
wmb(); /* Make sure owner changes after all others are visible */
lp->rx_ring[i].status = cpu_to_le16(0x8000);
}