| /* |
| * host.c - ChipIdea USB host controller driver |
| * |
| * Copyright (c) 2012 Intel Corporation |
| * |
| * Author: Alexander Shishkin |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/io.h> |
| #include <linux/usb.h> |
| #include <linux/usb/hcd.h> |
| #include <linux/usb/chipidea.h> |
| #include <linux/regulator/consumer.h> |
| |
| #include "../host/ehci.h" |
| |
| #include "ci.h" |
| #include "bits.h" |
| #include "host.h" |
| |
| static struct hc_driver __read_mostly ci_ehci_hc_driver; |
| |
| static irqreturn_t host_irq(struct ci_hdrc *ci) |
| { |
| return usb_hcd_irq(ci->irq, ci->hcd); |
| } |
| |
| static int host_start(struct ci_hdrc *ci) |
| { |
| struct usb_hcd *hcd; |
| struct ehci_hcd *ehci; |
| int ret; |
| |
| if (usb_disabled()) |
| return -ENODEV; |
| |
| hcd = usb_create_hcd(&ci_ehci_hc_driver, ci->dev, dev_name(ci->dev)); |
| if (!hcd) |
| return -ENOMEM; |
| |
| dev_set_drvdata(ci->dev, ci); |
| hcd->rsrc_start = ci->hw_bank.phys; |
| hcd->rsrc_len = ci->hw_bank.size; |
| hcd->regs = ci->hw_bank.abs; |
| hcd->has_tt = 1; |
| |
| hcd->power_budget = ci->platdata->power_budget; |
| hcd->usb_phy = ci->transceiver; |
| hcd->tpl_support = ci->platdata->tpl_support; |
| |
| ehci = hcd_to_ehci(hcd); |
| ehci->caps = ci->hw_bank.cap; |
| ehci->has_hostpc = ci->hw_bank.lpm; |
| ehci->has_tdi_phy_lpm = ci->hw_bank.lpm; |
| ehci->imx28_write_fix = ci->imx28_write_fix; |
| |
| /* |
| * vbus is always on if host is not in OTG FSM mode, |
| * otherwise should be controlled by OTG FSM |
| */ |
| if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci)) { |
| ret = regulator_enable(ci->platdata->reg_vbus); |
| if (ret) { |
| dev_err(ci->dev, |
| "Failed to enable vbus regulator, ret=%d\n", |
| ret); |
| goto put_hcd; |
| } |
| } |
| |
| ret = usb_add_hcd(hcd, 0, 0); |
| if (ret) { |
| goto disable_reg; |
| } else { |
| struct usb_otg *otg = ci->transceiver->otg; |
| |
| ci->hcd = hcd; |
| if (otg) { |
| otg->host = &hcd->self; |
| hcd->self.otg_port = 1; |
| } |
| } |
| |
| if (ci->platdata->flags & CI_HDRC_DISABLE_STREAMING) |
| hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS); |
| |
| return ret; |
| |
| disable_reg: |
| if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci)) |
| regulator_disable(ci->platdata->reg_vbus); |
| |
| put_hcd: |
| usb_put_hcd(hcd); |
| |
| return ret; |
| } |
| |
| static void host_stop(struct ci_hdrc *ci) |
| { |
| struct usb_hcd *hcd = ci->hcd; |
| |
| if (hcd) { |
| usb_remove_hcd(hcd); |
| usb_put_hcd(hcd); |
| if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci)) |
| regulator_disable(ci->platdata->reg_vbus); |
| } |
| } |
| |
| |
| void ci_hdrc_host_destroy(struct ci_hdrc *ci) |
| { |
| if (ci->role == CI_ROLE_HOST && ci->hcd) |
| host_stop(ci); |
| } |
| |
| int ci_hdrc_host_init(struct ci_hdrc *ci) |
| { |
| struct ci_role_driver *rdrv; |
| |
| if (!hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_HC)) |
| return -ENXIO; |
| |
| rdrv = devm_kzalloc(ci->dev, sizeof(struct ci_role_driver), GFP_KERNEL); |
| if (!rdrv) |
| return -ENOMEM; |
| |
| rdrv->start = host_start; |
| rdrv->stop = host_stop; |
| rdrv->irq = host_irq; |
| rdrv->name = "host"; |
| ci->roles[CI_ROLE_HOST] = rdrv; |
| |
| ehci_init_driver(&ci_ehci_hc_driver, NULL); |
| |
| return 0; |
| } |