| /* |
| * Copyright 2012 Freescale Semiconductor, Inc. |
| * |
| * The code contained herein is licensed under the GNU General Public |
| * License. You may obtain a copy of the GNU General Public License |
| * Version 2 or later at the following locations: |
| * |
| * http://www.opensource.org/licenses/gpl-license.html |
| * http://www.gnu.org/copyleft/gpl.html |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/of_platform.h> |
| #include <linux/clk.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/delay.h> |
| |
| #include "ci_hdrc_imx.h" |
| |
| #define MX25_USB_PHY_CTRL_OFFSET 0x08 |
| #define MX25_BM_EXTERNAL_VBUS_DIVIDER BIT(23) |
| |
| #define MX25_EHCI_INTERFACE_SINGLE_UNI (2 << 0) |
| #define MX25_EHCI_INTERFACE_DIFF_UNI (0 << 0) |
| #define MX25_EHCI_INTERFACE_MASK (0xf) |
| |
| #define MX25_OTG_SIC_SHIFT 29 |
| #define MX25_OTG_SIC_MASK (0x3 << MX25_OTG_SIC_SHIFT) |
| #define MX25_OTG_PM_BIT BIT(24) |
| #define MX25_OTG_PP_BIT BIT(11) |
| #define MX25_OTG_OCPOL_BIT BIT(3) |
| |
| #define MX25_H1_SIC_SHIFT 21 |
| #define MX25_H1_SIC_MASK (0x3 << MX25_H1_SIC_SHIFT) |
| #define MX25_H1_PP_BIT BIT(18) |
| #define MX25_H1_PM_BIT BIT(16) |
| #define MX25_H1_IPPUE_UP_BIT BIT(7) |
| #define MX25_H1_IPPUE_DOWN_BIT BIT(6) |
| #define MX25_H1_TLL_BIT BIT(5) |
| #define MX25_H1_USBTE_BIT BIT(4) |
| #define MX25_H1_OCPOL_BIT BIT(2) |
| |
| #define MX27_H1_PM_BIT BIT(8) |
| #define MX27_H2_PM_BIT BIT(16) |
| #define MX27_OTG_PM_BIT BIT(24) |
| |
| #define MX53_USB_OTG_PHY_CTRL_0_OFFSET 0x08 |
| #define MX53_USB_OTG_PHY_CTRL_1_OFFSET 0x0c |
| #define MX53_USB_UH2_CTRL_OFFSET 0x14 |
| #define MX53_USB_UH3_CTRL_OFFSET 0x18 |
| #define MX53_BM_OVER_CUR_DIS_H1 BIT(5) |
| #define MX53_BM_OVER_CUR_DIS_OTG BIT(8) |
| #define MX53_BM_OVER_CUR_DIS_UHx BIT(30) |
| #define MX53_USB_PHYCTRL1_PLLDIV_MASK 0x3 |
| #define MX53_USB_PLL_DIV_24_MHZ 0x01 |
| |
| #define MX6_BM_OVER_CUR_DIS BIT(7) |
| |
| #define VF610_OVER_CUR_DIS BIT(7) |
| |
| struct usbmisc_ops { |
| /* It's called once when probe a usb device */ |
| int (*init)(struct imx_usbmisc_data *data); |
| /* It's called once after adding a usb device */ |
| int (*post)(struct imx_usbmisc_data *data); |
| }; |
| |
| struct imx_usbmisc { |
| void __iomem *base; |
| spinlock_t lock; |
| struct clk *clk; |
| const struct usbmisc_ops *ops; |
| }; |
| |
| static int usbmisc_imx25_init(struct imx_usbmisc_data *data) |
| { |
| struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); |
| unsigned long flags; |
| u32 val = 0; |
| |
| if (data->index > 1) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&usbmisc->lock, flags); |
| switch (data->index) { |
| case 0: |
| val = readl(usbmisc->base); |
| val &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PP_BIT); |
| val |= (MX25_EHCI_INTERFACE_DIFF_UNI & MX25_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT; |
| val |= (MX25_OTG_PM_BIT | MX25_OTG_OCPOL_BIT); |
| writel(val, usbmisc->base); |
| break; |
| case 1: |
| val = readl(usbmisc->base); |
| val &= ~(MX25_H1_SIC_MASK | MX25_H1_PP_BIT | MX25_H1_IPPUE_UP_BIT); |
| val |= (MX25_EHCI_INTERFACE_SINGLE_UNI & MX25_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT; |
| val |= (MX25_H1_PM_BIT | MX25_H1_OCPOL_BIT | MX25_H1_TLL_BIT | |
| MX25_H1_USBTE_BIT | MX25_H1_IPPUE_DOWN_BIT); |
| |
| writel(val, usbmisc->base); |
| |
| break; |
| } |
| spin_unlock_irqrestore(&usbmisc->lock, flags); |
| |
| return 0; |
| } |
| |
| static int usbmisc_imx25_post(struct imx_usbmisc_data *data) |
| { |
| struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); |
| void __iomem *reg; |
| unsigned long flags; |
| u32 val; |
| |
| if (data->index > 2) |
| return -EINVAL; |
| |
| reg = usbmisc->base + MX25_USB_PHY_CTRL_OFFSET; |
| |
| if (data->evdo) { |
| spin_lock_irqsave(&usbmisc->lock, flags); |
| val = readl(reg); |
| writel(val | MX25_BM_EXTERNAL_VBUS_DIVIDER, reg); |
| spin_unlock_irqrestore(&usbmisc->lock, flags); |
| usleep_range(5000, 10000); /* needed to stabilize voltage */ |
| } |
| |
| return 0; |
| } |
| |
| static int usbmisc_imx27_init(struct imx_usbmisc_data *data) |
| { |
| struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); |
| unsigned long flags; |
| u32 val; |
| |
| switch (data->index) { |
| case 0: |
| val = MX27_OTG_PM_BIT; |
| break; |
| case 1: |
| val = MX27_H1_PM_BIT; |
| break; |
| case 2: |
| val = MX27_H2_PM_BIT; |
| break; |
| default: |
| return -EINVAL; |
| }; |
| |
| spin_lock_irqsave(&usbmisc->lock, flags); |
| if (data->disable_oc) |
| val = readl(usbmisc->base) | val; |
| else |
| val = readl(usbmisc->base) & ~val; |
| writel(val, usbmisc->base); |
| spin_unlock_irqrestore(&usbmisc->lock, flags); |
| |
| return 0; |
| } |
| |
| static int usbmisc_imx53_init(struct imx_usbmisc_data *data) |
| { |
| struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); |
| void __iomem *reg = NULL; |
| unsigned long flags; |
| u32 val = 0; |
| |
| if (data->index > 3) |
| return -EINVAL; |
| |
| /* Select a 24 MHz reference clock for the PHY */ |
| reg = usbmisc->base + MX53_USB_OTG_PHY_CTRL_1_OFFSET; |
| val = readl(reg); |
| val &= ~MX53_USB_PHYCTRL1_PLLDIV_MASK; |
| val |= MX53_USB_PLL_DIV_24_MHZ; |
| writel(val, usbmisc->base + MX53_USB_OTG_PHY_CTRL_1_OFFSET); |
| |
| if (data->disable_oc) { |
| spin_lock_irqsave(&usbmisc->lock, flags); |
| switch (data->index) { |
| case 0: |
| reg = usbmisc->base + MX53_USB_OTG_PHY_CTRL_0_OFFSET; |
| val = readl(reg) | MX53_BM_OVER_CUR_DIS_OTG; |
| break; |
| case 1: |
| reg = usbmisc->base + MX53_USB_OTG_PHY_CTRL_0_OFFSET; |
| val = readl(reg) | MX53_BM_OVER_CUR_DIS_H1; |
| break; |
| case 2: |
| reg = usbmisc->base + MX53_USB_UH2_CTRL_OFFSET; |
| val = readl(reg) | MX53_BM_OVER_CUR_DIS_UHx; |
| break; |
| case 3: |
| reg = usbmisc->base + MX53_USB_UH3_CTRL_OFFSET; |
| val = readl(reg) | MX53_BM_OVER_CUR_DIS_UHx; |
| break; |
| } |
| if (reg && val) |
| writel(val, reg); |
| spin_unlock_irqrestore(&usbmisc->lock, flags); |
| } |
| |
| return 0; |
| } |
| |
| static int usbmisc_imx6q_init(struct imx_usbmisc_data *data) |
| { |
| struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); |
| unsigned long flags; |
| u32 reg; |
| |
| if (data->index > 3) |
| return -EINVAL; |
| |
| if (data->disable_oc) { |
| spin_lock_irqsave(&usbmisc->lock, flags); |
| reg = readl(usbmisc->base + data->index * 4); |
| writel(reg | MX6_BM_OVER_CUR_DIS, |
| usbmisc->base + data->index * 4); |
| spin_unlock_irqrestore(&usbmisc->lock, flags); |
| } |
| |
| return 0; |
| } |
| |
| static int usbmisc_vf610_init(struct imx_usbmisc_data *data) |
| { |
| struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); |
| u32 reg; |
| |
| /* |
| * Vybrid only has one misc register set, but in two different |
| * areas. These is reflected in two instances of this driver. |
| */ |
| if (data->index >= 1) |
| return -EINVAL; |
| |
| if (data->disable_oc) { |
| reg = readl(usbmisc->base); |
| writel(reg | VF610_OVER_CUR_DIS, usbmisc->base); |
| } |
| |
| return 0; |
| } |
| |
| static const struct usbmisc_ops imx25_usbmisc_ops = { |
| .init = usbmisc_imx25_init, |
| .post = usbmisc_imx25_post, |
| }; |
| |
| static const struct usbmisc_ops imx27_usbmisc_ops = { |
| .init = usbmisc_imx27_init, |
| }; |
| |
| static const struct usbmisc_ops imx53_usbmisc_ops = { |
| .init = usbmisc_imx53_init, |
| }; |
| |
| static const struct usbmisc_ops imx6q_usbmisc_ops = { |
| .init = usbmisc_imx6q_init, |
| }; |
| |
| static const struct usbmisc_ops vf610_usbmisc_ops = { |
| .init = usbmisc_vf610_init, |
| }; |
| |
| int imx_usbmisc_init(struct imx_usbmisc_data *data) |
| { |
| struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); |
| |
| if (!usbmisc->ops->init) |
| return 0; |
| return usbmisc->ops->init(data); |
| } |
| EXPORT_SYMBOL_GPL(imx_usbmisc_init); |
| |
| int imx_usbmisc_init_post(struct imx_usbmisc_data *data) |
| { |
| struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); |
| |
| if (!usbmisc->ops->post) |
| return 0; |
| return usbmisc->ops->post(data); |
| } |
| EXPORT_SYMBOL_GPL(imx_usbmisc_init_post); |
| |
| static const struct of_device_id usbmisc_imx_dt_ids[] = { |
| { |
| .compatible = "fsl,imx25-usbmisc", |
| .data = &imx25_usbmisc_ops, |
| }, |
| { |
| .compatible = "fsl,imx35-usbmisc", |
| .data = &imx25_usbmisc_ops, |
| }, |
| { |
| .compatible = "fsl,imx27-usbmisc", |
| .data = &imx27_usbmisc_ops, |
| }, |
| { |
| .compatible = "fsl,imx51-usbmisc", |
| .data = &imx53_usbmisc_ops, |
| }, |
| { |
| .compatible = "fsl,imx53-usbmisc", |
| .data = &imx53_usbmisc_ops, |
| }, |
| { |
| .compatible = "fsl,imx6q-usbmisc", |
| .data = &imx6q_usbmisc_ops, |
| }, |
| { |
| .compatible = "fsl,vf610-usbmisc", |
| .data = &vf610_usbmisc_ops, |
| }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, usbmisc_imx_dt_ids); |
| |
| static int usbmisc_imx_probe(struct platform_device *pdev) |
| { |
| struct resource *res; |
| struct imx_usbmisc *data; |
| int ret; |
| struct of_device_id *tmp_dev; |
| |
| data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| spin_lock_init(&data->lock); |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| data->base = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(data->base)) |
| return PTR_ERR(data->base); |
| |
| data->clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(data->clk)) { |
| dev_err(&pdev->dev, |
| "failed to get clock, err=%ld\n", PTR_ERR(data->clk)); |
| return PTR_ERR(data->clk); |
| } |
| |
| ret = clk_prepare_enable(data->clk); |
| if (ret) { |
| dev_err(&pdev->dev, |
| "clk_prepare_enable failed, err=%d\n", ret); |
| return ret; |
| } |
| |
| tmp_dev = (struct of_device_id *) |
| of_match_device(usbmisc_imx_dt_ids, &pdev->dev); |
| data->ops = (const struct usbmisc_ops *)tmp_dev->data; |
| platform_set_drvdata(pdev, data); |
| |
| return 0; |
| } |
| |
| static int usbmisc_imx_remove(struct platform_device *pdev) |
| { |
| struct imx_usbmisc *usbmisc = dev_get_drvdata(&pdev->dev); |
| clk_disable_unprepare(usbmisc->clk); |
| return 0; |
| } |
| |
| static struct platform_driver usbmisc_imx_driver = { |
| .probe = usbmisc_imx_probe, |
| .remove = usbmisc_imx_remove, |
| .driver = { |
| .name = "usbmisc_imx", |
| .owner = THIS_MODULE, |
| .of_match_table = usbmisc_imx_dt_ids, |
| }, |
| }; |
| |
| module_platform_driver(usbmisc_imx_driver); |
| |
| MODULE_ALIAS("platform:usbmisc-imx"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("driver for imx usb non-core registers"); |
| MODULE_AUTHOR("Richard Zhao <richard.zhao@freescale.com>"); |