| /* |
| * |
| * hda_intel.c - Implementation of primary alsa driver code base |
| * for Intel HD Audio. |
| * |
| * Copyright(c) 2004 Intel Corporation. All rights reserved. |
| * |
| * Copyright (c) 2004 Takashi Iwai <tiwai@suse.de> |
| * PeiSen Hou <pshou@realtek.com.tw> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the Free |
| * Software Foundation; either version 2 of the License, or (at your option) |
| * any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., 59 |
| * Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| * |
| * CONTACTS: |
| * |
| * Matt Jared matt.jared@intel.com |
| * Andy Kopp andy.kopp@intel.com |
| * Dan Kogan dan.d.kogan@intel.com |
| * |
| * CHANGES: |
| * |
| * 2004.12.01 Major rewrite by tiwai, merged the work of pshou |
| * |
| */ |
| |
| #include <asm/io.h> |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/pci.h> |
| #include <linux/mutex.h> |
| #include <linux/reboot.h> |
| #include <sound/core.h> |
| #include <sound/initval.h> |
| #include "hda_codec.h" |
| |
| |
| static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; |
| static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; |
| static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; |
| static char *model[SNDRV_CARDS]; |
| static int position_fix[SNDRV_CARDS]; |
| static int bdl_pos_adj[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] = -1}; |
| static int probe_mask[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] = -1}; |
| static int probe_only[SNDRV_CARDS]; |
| static int single_cmd; |
| static int enable_msi = -1; |
| #ifdef CONFIG_SND_HDA_PATCH_LOADER |
| static char *patch[SNDRV_CARDS]; |
| #endif |
| |
| module_param_array(index, int, NULL, 0444); |
| MODULE_PARM_DESC(index, "Index value for Intel HD audio interface."); |
| module_param_array(id, charp, NULL, 0444); |
| MODULE_PARM_DESC(id, "ID string for Intel HD audio interface."); |
| module_param_array(enable, bool, NULL, 0444); |
| MODULE_PARM_DESC(enable, "Enable Intel HD audio interface."); |
| module_param_array(model, charp, NULL, 0444); |
| MODULE_PARM_DESC(model, "Use the given board model."); |
| module_param_array(position_fix, int, NULL, 0444); |
| MODULE_PARM_DESC(position_fix, "Fix DMA pointer " |
| "(0 = auto, 1 = none, 2 = POSBUF)."); |
| module_param_array(bdl_pos_adj, int, NULL, 0644); |
| MODULE_PARM_DESC(bdl_pos_adj, "BDL position adjustment offset."); |
| module_param_array(probe_mask, int, NULL, 0444); |
| MODULE_PARM_DESC(probe_mask, "Bitmask to probe codecs (default = -1)."); |
| module_param_array(probe_only, bool, NULL, 0444); |
| MODULE_PARM_DESC(probe_only, "Only probing and no codec initialization."); |
| module_param(single_cmd, bool, 0444); |
| MODULE_PARM_DESC(single_cmd, "Use single command to communicate with codecs " |
| "(for debugging only)."); |
| module_param(enable_msi, int, 0444); |
| MODULE_PARM_DESC(enable_msi, "Enable Message Signaled Interrupt (MSI)"); |
| #ifdef CONFIG_SND_HDA_PATCH_LOADER |
| module_param_array(patch, charp, NULL, 0444); |
| MODULE_PARM_DESC(patch, "Patch file for Intel HD audio interface."); |
| #endif |
| |
| #ifdef CONFIG_SND_HDA_POWER_SAVE |
| static int power_save = CONFIG_SND_HDA_POWER_SAVE_DEFAULT; |
| module_param(power_save, int, 0644); |
| MODULE_PARM_DESC(power_save, "Automatic power-saving timeout " |
| "(in second, 0 = disable)."); |
| |
| /* reset the HD-audio controller in power save mode. |
| * this may give more power-saving, but will take longer time to |
| * wake up. |
| */ |
| static int power_save_controller = 1; |
| module_param(power_save_controller, bool, 0644); |
| MODULE_PARM_DESC(power_save_controller, "Reset controller in power save mode."); |
| #endif |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_SUPPORTED_DEVICE("{{Intel, ICH6}," |
| "{Intel, ICH6M}," |
| "{Intel, ICH7}," |
| "{Intel, ESB2}," |
| "{Intel, ICH8}," |
| "{Intel, ICH9}," |
| "{Intel, ICH10}," |
| "{Intel, PCH}," |
| "{Intel, SCH}," |
| "{ATI, SB450}," |
| "{ATI, SB600}," |
| "{ATI, RS600}," |
| "{ATI, RS690}," |
| "{ATI, RS780}," |
| "{ATI, R600}," |
| "{ATI, RV630}," |
| "{ATI, RV610}," |
| "{ATI, RV670}," |
| "{ATI, RV635}," |
| "{ATI, RV620}," |
| "{ATI, RV770}," |
| "{VIA, VT8251}," |
| "{VIA, VT8237A}," |
| "{SiS, SIS966}," |
| "{ULI, M5461}}"); |
| MODULE_DESCRIPTION("Intel HDA driver"); |
| |
| #ifdef CONFIG_SND_VERBOSE_PRINTK |
| #define SFX /* nop */ |
| #else |
| #define SFX "hda-intel: " |
| #endif |
| |
| /* |
| * registers |
| */ |
| #define ICH6_REG_GCAP 0x00 |
| #define ICH6_GCAP_64OK (1 << 0) /* 64bit address support */ |
| #define ICH6_GCAP_NSDO (3 << 1) /* # of serial data out signals */ |
| #define ICH6_GCAP_BSS (31 << 3) /* # of bidirectional streams */ |
| #define ICH6_GCAP_ISS (15 << 8) /* # of input streams */ |
| #define ICH6_GCAP_OSS (15 << 12) /* # of output streams */ |
| #define ICH6_REG_VMIN 0x02 |
| #define ICH6_REG_VMAJ 0x03 |
| #define ICH6_REG_OUTPAY 0x04 |
| #define ICH6_REG_INPAY 0x06 |
| #define ICH6_REG_GCTL 0x08 |
| #define ICH6_GCTL_RESET (1 << 0) /* controller reset */ |
| #define ICH6_GCTL_FCNTRL (1 << 1) /* flush control */ |
| #define ICH6_GCTL_UNSOL (1 << 8) /* accept unsol. response enable */ |
| #define ICH6_REG_WAKEEN 0x0c |
| #define ICH6_REG_STATESTS 0x0e |
| #define ICH6_REG_GSTS 0x10 |
| #define ICH6_GSTS_FSTS (1 << 1) /* flush status */ |
| #define ICH6_REG_INTCTL 0x20 |
| #define ICH6_REG_INTSTS 0x24 |
| #define ICH6_REG_WALCLK 0x30 |
| #define ICH6_REG_SYNC 0x34 |
| #define ICH6_REG_CORBLBASE 0x40 |
| #define ICH6_REG_CORBUBASE 0x44 |
| #define ICH6_REG_CORBWP 0x48 |
| #define ICH6_REG_CORBRP 0x4a |
| #define ICH6_CORBRP_RST (1 << 15) /* read pointer reset */ |
| #define ICH6_REG_CORBCTL 0x4c |
| #define ICH6_CORBCTL_RUN (1 << 1) /* enable DMA */ |
| #define ICH6_CORBCTL_CMEIE (1 << 0) /* enable memory error irq */ |
| #define ICH6_REG_CORBSTS 0x4d |
| #define ICH6_CORBSTS_CMEI (1 << 0) /* memory error indication */ |
| #define ICH6_REG_CORBSIZE 0x4e |
| |
| #define ICH6_REG_RIRBLBASE 0x50 |
| #define ICH6_REG_RIRBUBASE 0x54 |
| #define ICH6_REG_RIRBWP 0x58 |
| #define ICH6_RIRBWP_RST (1 << 15) /* write pointer reset */ |
| #define ICH6_REG_RINTCNT 0x5a |
| #define ICH6_REG_RIRBCTL 0x5c |
| #define ICH6_RBCTL_IRQ_EN (1 << 0) /* enable IRQ */ |
| #define ICH6_RBCTL_DMA_EN (1 << 1) /* enable DMA */ |
| #define ICH6_RBCTL_OVERRUN_EN (1 << 2) /* enable overrun irq */ |
| #define ICH6_REG_RIRBSTS 0x5d |
| #define ICH6_RBSTS_IRQ (1 << 0) /* response irq */ |
| #define ICH6_RBSTS_OVERRUN (1 << 2) /* overrun irq */ |
| #define ICH6_REG_RIRBSIZE 0x5e |
| |
| #define ICH6_REG_IC 0x60 |
| #define ICH6_REG_IR 0x64 |
| #define ICH6_REG_IRS 0x68 |
| #define ICH6_IRS_VALID (1<<1) |
| #define ICH6_IRS_BUSY (1<<0) |
| |
| #define ICH6_REG_DPLBASE 0x70 |
| #define ICH6_REG_DPUBASE 0x74 |
| #define ICH6_DPLBASE_ENABLE 0x1 /* Enable position buffer */ |
| |
| /* SD offset: SDI0=0x80, SDI1=0xa0, ... SDO3=0x160 */ |
| enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 }; |
| |
| /* stream register offsets from stream base */ |
| #define ICH6_REG_SD_CTL 0x00 |
| #define ICH6_REG_SD_STS 0x03 |
| #define ICH6_REG_SD_LPIB 0x04 |
| #define ICH6_REG_SD_CBL 0x08 |
| #define ICH6_REG_SD_LVI 0x0c |
| #define ICH6_REG_SD_FIFOW 0x0e |
| #define ICH6_REG_SD_FIFOSIZE 0x10 |
| #define ICH6_REG_SD_FORMAT 0x12 |
| #define ICH6_REG_SD_BDLPL 0x18 |
| #define ICH6_REG_SD_BDLPU 0x1c |
| |
| /* PCI space */ |
| #define ICH6_PCIREG_TCSEL 0x44 |
| |
| /* |
| * other constants |
| */ |
| |
| /* max number of SDs */ |
| /* ICH, ATI and VIA have 4 playback and 4 capture */ |
| #define ICH6_NUM_CAPTURE 4 |
| #define ICH6_NUM_PLAYBACK 4 |
| |
| /* ULI has 6 playback and 5 capture */ |
| #define ULI_NUM_CAPTURE 5 |
| #define ULI_NUM_PLAYBACK 6 |
| |
| /* ATI HDMI has 1 playback and 0 capture */ |
| #define ATIHDMI_NUM_CAPTURE 0 |
| #define ATIHDMI_NUM_PLAYBACK 1 |
| |
| /* TERA has 4 playback and 3 capture */ |
| #define TERA_NUM_CAPTURE 3 |
| #define TERA_NUM_PLAYBACK 4 |
| |
| /* this number is statically defined for simplicity */ |
| #define MAX_AZX_DEV 16 |
| |
| /* max number of fragments - we may use more if allocating more pages for BDL */ |
| #define BDL_SIZE 4096 |
| #define AZX_MAX_BDL_ENTRIES (BDL_SIZE / 16) |
| #define AZX_MAX_FRAG 32 |
| /* max buffer size - no h/w limit, you can increase as you like */ |
| #define AZX_MAX_BUF_SIZE (1024*1024*1024) |
| /* max number of PCM devics per card */ |
| #define AZX_MAX_PCMS 8 |
| |
| /* RIRB int mask: overrun[2], response[0] */ |
| #define RIRB_INT_RESPONSE 0x01 |
| #define RIRB_INT_OVERRUN 0x04 |
| #define RIRB_INT_MASK 0x05 |
| |
| /* STATESTS int mask: S3,SD2,SD1,SD0 */ |
| #define AZX_MAX_CODECS 4 |
| #define STATESTS_INT_MASK ((1 << AZX_MAX_CODECS) - 1) |
| |
| /* SD_CTL bits */ |
| #define SD_CTL_STREAM_RESET 0x01 /* stream reset bit */ |
| #define SD_CTL_DMA_START 0x02 /* stream DMA start bit */ |
| #define SD_CTL_STRIPE (3 << 16) /* stripe control */ |
| #define SD_CTL_TRAFFIC_PRIO (1 << 18) /* traffic priority */ |
| #define SD_CTL_DIR (1 << 19) /* bi-directional stream */ |
| #define SD_CTL_STREAM_TAG_MASK (0xf << 20) |
| #define SD_CTL_STREAM_TAG_SHIFT 20 |
| |
| /* SD_CTL and SD_STS */ |
| #define SD_INT_DESC_ERR 0x10 /* descriptor error interrupt */ |
| #define SD_INT_FIFO_ERR 0x08 /* FIFO error interrupt */ |
| #define SD_INT_COMPLETE 0x04 /* completion interrupt */ |
| #define SD_INT_MASK (SD_INT_DESC_ERR|SD_INT_FIFO_ERR|\ |
| SD_INT_COMPLETE) |
| |
| /* SD_STS */ |
| #define SD_STS_FIFO_READY 0x20 /* FIFO ready */ |
| |
| /* INTCTL and INTSTS */ |
| #define ICH6_INT_ALL_STREAM 0xff /* all stream interrupts */ |
| #define ICH6_INT_CTRL_EN 0x40000000 /* controller interrupt enable bit */ |
| #define ICH6_INT_GLOBAL_EN 0x80000000 /* global interrupt enable bit */ |
| |
| /* below are so far hardcoded - should read registers in future */ |
| #define ICH6_MAX_CORB_ENTRIES 256 |
| #define ICH6_MAX_RIRB_ENTRIES 256 |
| |
| /* position fix mode */ |
| enum { |
| POS_FIX_AUTO, |
| POS_FIX_LPIB, |
| POS_FIX_POSBUF, |
| }; |
| |
| /* Defines for ATI HD Audio support in SB450 south bridge */ |
| #define ATI_SB450_HDAUDIO_MISC_CNTR2_ADDR 0x42 |
| #define ATI_SB450_HDAUDIO_ENABLE_SNOOP 0x02 |
| |
| /* Defines for Nvidia HDA support */ |
| #define NVIDIA_HDA_TRANSREG_ADDR 0x4e |
| #define NVIDIA_HDA_ENABLE_COHBITS 0x0f |
| #define NVIDIA_HDA_ISTRM_COH 0x4d |
| #define NVIDIA_HDA_OSTRM_COH 0x4c |
| #define NVIDIA_HDA_ENABLE_COHBIT 0x01 |
| |
| /* Defines for Intel SCH HDA snoop control */ |
| #define INTEL_SCH_HDA_DEVC 0x78 |
| #define INTEL_SCH_HDA_DEVC_NOSNOOP (0x1<<11) |
| |
| /* Define IN stream 0 FIFO size offset in VIA controller */ |
| #define VIA_IN_STREAM0_FIFO_SIZE_OFFSET 0x90 |
| /* Define VIA HD Audio Device ID*/ |
| #define VIA_HDAC_DEVICE_ID 0x3288 |
| |
| /* HD Audio class code */ |
| #define PCI_CLASS_MULTIMEDIA_HD_AUDIO 0x0403 |
| |
| /* |
| */ |
| |
| struct azx_dev { |
| struct snd_dma_buffer bdl; /* BDL buffer */ |
| u32 *posbuf; /* position buffer pointer */ |
| |
| unsigned int bufsize; /* size of the play buffer in bytes */ |
| unsigned int period_bytes; /* size of the period in bytes */ |
| unsigned int frags; /* number for period in the play buffer */ |
| unsigned int fifo_size; /* FIFO size */ |
| unsigned long start_jiffies; /* start + minimum jiffies */ |
| unsigned long min_jiffies; /* minimum jiffies before position is valid */ |
| |
| void __iomem *sd_addr; /* stream descriptor pointer */ |
| |
| u32 sd_int_sta_mask; /* stream int status mask */ |
| |
| /* pcm support */ |
| struct snd_pcm_substream *substream; /* assigned substream, |
| * set in PCM open |
| */ |
| unsigned int format_val; /* format value to be set in the |
| * controller and the codec |
| */ |
| unsigned char stream_tag; /* assigned stream */ |
| unsigned char index; /* stream index */ |
| |
| unsigned int opened :1; |
| unsigned int running :1; |
| unsigned int irq_pending :1; |
| unsigned int start_flag: 1; /* stream full start flag */ |
| /* |
| * For VIA: |
| * A flag to ensure DMA position is 0 |
| * when link position is not greater than FIFO size |
| */ |
| unsigned int insufficient :1; |
| }; |
| |
| /* CORB/RIRB */ |
| struct azx_rb { |
| u32 *buf; /* CORB/RIRB buffer |
| * Each CORB entry is 4byte, RIRB is 8byte |
| */ |
| dma_addr_t addr; /* physical address of CORB/RIRB buffer */ |
| /* for RIRB */ |
| unsigned short rp, wp; /* read/write pointers */ |
| int cmds[AZX_MAX_CODECS]; /* number of pending requests */ |
| u32 res[AZX_MAX_CODECS]; /* last read value */ |
| }; |
| |
| struct azx { |
| struct snd_card *card; |
| struct pci_dev *pci; |
| int dev_index; |
| |
| /* chip type specific */ |
| int driver_type; |
| int playback_streams; |
| int playback_index_offset; |
| int capture_streams; |
| int capture_index_offset; |
| int num_streams; |
| |
| /* pci resources */ |
| unsigned long addr; |
| void __iomem *remap_addr; |
| int irq; |
| |
| /* locks */ |
| spinlock_t reg_lock; |
| struct mutex open_mutex; |
| |
| /* streams (x num_streams) */ |
| struct azx_dev *azx_dev; |
| |
| /* PCM */ |
| struct snd_pcm *pcm[AZX_MAX_PCMS]; |
| |
| /* HD codec */ |
| unsigned short codec_mask; |
| int codec_probe_mask; /* copied from probe_mask option */ |
| struct hda_bus *bus; |
| |
| /* CORB/RIRB */ |
| struct azx_rb corb; |
| struct azx_rb rirb; |
| |
| /* CORB/RIRB and position buffers */ |
| struct snd_dma_buffer rb; |
| struct snd_dma_buffer posbuf; |
| |
| /* flags */ |
| int position_fix; |
| unsigned int running :1; |
| unsigned int initialized :1; |
| unsigned int single_cmd :1; |
| unsigned int polling_mode :1; |
| unsigned int msi :1; |
| unsigned int irq_pending_warned :1; |
| unsigned int via_dmapos_patch :1; /* enable DMA-position fix for VIA */ |
| unsigned int probing :1; /* codec probing phase */ |
| |
| /* for debugging */ |
| unsigned int last_cmd[AZX_MAX_CODECS]; |
| |
| /* for pending irqs */ |
| struct work_struct irq_pending_work; |
| |
| /* reboot notifier (for mysterious hangup problem at power-down) */ |
| struct notifier_block reboot_notifier; |
| }; |
| |
| /* driver types */ |
| enum { |
| AZX_DRIVER_ICH, |
| AZX_DRIVER_SCH, |
| AZX_DRIVER_ATI, |
| AZX_DRIVER_ATIHDMI, |
| AZX_DRIVER_VIA, |
| AZX_DRIVER_SIS, |
| AZX_DRIVER_ULI, |
| AZX_DRIVER_NVIDIA, |
| AZX_DRIVER_TERA, |
| AZX_DRIVER_GENERIC, |
| AZX_NUM_DRIVERS, /* keep this as last entry */ |
| }; |
| |
| static char *driver_short_names[] __devinitdata = { |
| [AZX_DRIVER_ICH] = "HDA Intel", |
| [AZX_DRIVER_SCH] = "HDA Intel MID", |
| [AZX_DRIVER_ATI] = "HDA ATI SB", |
| [AZX_DRIVER_ATIHDMI] = "HDA ATI HDMI", |
| [AZX_DRIVER_VIA] = "HDA VIA VT82xx", |
| [AZX_DRIVER_SIS] = "HDA SIS966", |
| [AZX_DRIVER_ULI] = "HDA ULI M5461", |
| [AZX_DRIVER_NVIDIA] = "HDA NVidia", |
| [AZX_DRIVER_TERA] = "HDA Teradici", |
| [AZX_DRIVER_GENERIC] = "HD-Audio Generic", |
| }; |
| |
| /* |
| * macros for easy use |
| */ |
| #define azx_writel(chip,reg,value) \ |
| writel(value, (chip)->remap_addr + ICH6_REG_##reg) |
| #define azx_readl(chip,reg) \ |
| readl((chip)->remap_addr + ICH6_REG_##reg) |
| #define azx_writew(chip,reg,value) \ |
| writew(value, (chip)->remap_addr + ICH6_REG_##reg) |
| #define azx_readw(chip,reg) \ |
| readw((chip)->remap_addr + ICH6_REG_##reg) |
| #define azx_writeb(chip,reg,value) \ |
| writeb(value, (chip)->remap_addr + ICH6_REG_##reg) |
| #define azx_readb(chip,reg) \ |
| readb((chip)->remap_addr + ICH6_REG_##reg) |
| |
| #define azx_sd_writel(dev,reg,value) \ |
| writel(value, (dev)->sd_addr + ICH6_REG_##reg) |
| #define azx_sd_readl(dev,reg) \ |
| readl((dev)->sd_addr + ICH6_REG_##reg) |
| #define azx_sd_writew(dev,reg,value) \ |
| writew(value, (dev)->sd_addr + ICH6_REG_##reg) |
| #define azx_sd_readw(dev,reg) \ |
| readw((dev)->sd_addr + ICH6_REG_##reg) |
| #define azx_sd_writeb(dev,reg,value) \ |
| writeb(value, (dev)->sd_addr + ICH6_REG_##reg) |
| #define azx_sd_readb(dev,reg) \ |
| readb((dev)->sd_addr + ICH6_REG_##reg) |
| |
| /* for pcm support */ |
| #define get_azx_dev(substream) (substream->runtime->private_data) |
| |
| static int azx_acquire_irq(struct azx *chip, int do_disconnect); |
| |
| /* |
| * Interface for HD codec |
| */ |
| |
| /* |
| * CORB / RIRB interface |
| */ |
| static int azx_alloc_cmd_io(struct azx *chip) |
| { |
| int err; |
| |
| /* single page (at least 4096 bytes) must suffice for both ringbuffes */ |
| err = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, |
| snd_dma_pci_data(chip->pci), |
| PAGE_SIZE, &chip->rb); |
| if (err < 0) { |
| snd_printk(KERN_ERR SFX "cannot allocate CORB/RIRB\n"); |
| return err; |
| } |
| return 0; |
| } |
| |
| static void azx_init_cmd_io(struct azx *chip) |
| { |
| spin_lock_irq(&chip->reg_lock); |
| /* CORB set up */ |
| chip->corb.addr = chip->rb.addr; |
| chip->corb.buf = (u32 *)chip->rb.area; |
| azx_writel(chip, CORBLBASE, (u32)chip->corb.addr); |
| azx_writel(chip, CORBUBASE, upper_32_bits(chip->corb.addr)); |
| |
| /* set the corb size to 256 entries (ULI requires explicitly) */ |
| azx_writeb(chip, CORBSIZE, 0x02); |
| /* set the corb write pointer to 0 */ |
| azx_writew(chip, CORBWP, 0); |
| /* reset the corb hw read pointer */ |
| azx_writew(chip, CORBRP, ICH6_CORBRP_RST); |
| /* enable corb dma */ |
| azx_writeb(chip, CORBCTL, ICH6_CORBCTL_RUN); |
| |
| /* RIRB set up */ |
| chip->rirb.addr = chip->rb.addr + 2048; |
| chip->rirb.buf = (u32 *)(chip->rb.area + 2048); |
| chip->rirb.wp = chip->rirb.rp = 0; |
| memset(chip->rirb.cmds, 0, sizeof(chip->rirb.cmds)); |
| azx_writel(chip, RIRBLBASE, (u32)chip->rirb.addr); |
| azx_writel(chip, RIRBUBASE, upper_32_bits(chip->rirb.addr)); |
| |
| /* set the rirb size to 256 entries (ULI requires explicitly) */ |
| azx_writeb(chip, RIRBSIZE, 0x02); |
| /* reset the rirb hw write pointer */ |
| azx_writew(chip, RIRBWP, ICH6_RIRBWP_RST); |
| /* set N=1, get RIRB response interrupt for new entry */ |
| azx_writew(chip, RINTCNT, 1); |
| /* enable rirb dma and response irq */ |
| azx_writeb(chip, RIRBCTL, ICH6_RBCTL_DMA_EN | ICH6_RBCTL_IRQ_EN); |
| spin_unlock_irq(&chip->reg_lock); |
| } |
| |
| static void azx_free_cmd_io(struct azx *chip) |
| { |
| spin_lock_irq(&chip->reg_lock); |
| /* disable ringbuffer DMAs */ |
| azx_writeb(chip, RIRBCTL, 0); |
| azx_writeb(chip, CORBCTL, 0); |
| spin_unlock_irq(&chip->reg_lock); |
| } |
| |
| static unsigned int azx_command_addr(u32 cmd) |
| { |
| unsigned int addr = cmd >> 28; |
| |
| if (addr >= AZX_MAX_CODECS) { |
| snd_BUG(); |
| addr = 0; |
| } |
| |
| return addr; |
| } |
| |
| static unsigned int azx_response_addr(u32 res) |
| { |
| unsigned int addr = res & 0xf; |
| |
| if (addr >= AZX_MAX_CODECS) { |
| snd_BUG(); |
| addr = 0; |
| } |
| |
| return addr; |
| } |
| |
| /* send a command */ |
| static int azx_corb_send_cmd(struct hda_bus *bus, u32 val) |
| { |
| struct azx *chip = bus->private_data; |
| unsigned int addr = azx_command_addr(val); |
| unsigned int wp; |
| |
| spin_lock_irq(&chip->reg_lock); |
| |
| /* add command to corb */ |
| wp = azx_readb(chip, CORBWP); |
| wp++; |
| wp %= ICH6_MAX_CORB_ENTRIES; |
| |
| chip->rirb.cmds[addr]++; |
| chip->corb.buf[wp] = cpu_to_le32(val); |
| azx_writel(chip, CORBWP, wp); |
| |
| spin_unlock_irq(&chip->reg_lock); |
| |
| return 0; |
| } |
| |
| #define ICH6_RIRB_EX_UNSOL_EV (1<<4) |
| |
| /* retrieve RIRB entry - called from interrupt handler */ |
| static void azx_update_rirb(struct azx *chip) |
| { |
| unsigned int rp, wp; |
| unsigned int addr; |
| u32 res, res_ex; |
| |
| wp = azx_readb(chip, RIRBWP); |
| if (wp == chip->rirb.wp) |
| return; |
| chip->rirb.wp = wp; |
| |
| while (chip->rirb.rp != wp) { |
| chip->rirb.rp++; |
| chip->rirb.rp %= ICH6_MAX_RIRB_ENTRIES; |
| |
| rp = chip->rirb.rp << 1; /* an RIRB entry is 8-bytes */ |
| res_ex = le32_to_cpu(chip->rirb.buf[rp + 1]); |
| res = le32_to_cpu(chip->rirb.buf[rp]); |
| addr = azx_response_addr(res_ex); |
| if (res_ex & ICH6_RIRB_EX_UNSOL_EV) |
| snd_hda_queue_unsol_event(chip->bus, res, res_ex); |
| else if (chip->rirb.cmds[addr]) { |
| chip->rirb.res[addr] = res; |
| smp_wmb(); |
| chip->rirb.cmds[addr]--; |
| } else |
| snd_printk(KERN_ERR SFX "spurious response %#x:%#x, " |
| "last cmd=%#08x\n", |
| res, res_ex, |
| chip->last_cmd[addr]); |
| } |
| } |
| |
| /* receive a response */ |
| static unsigned int azx_rirb_get_response(struct hda_bus *bus, |
| unsigned int addr) |
| { |
| struct azx *chip = bus->private_data; |
| unsigned long timeout; |
| |
| again: |
| timeout = jiffies + msecs_to_jiffies(1000); |
| for (;;) { |
| if (chip->polling_mode) { |
| spin_lock_irq(&chip->reg_lock); |
| azx_update_rirb(chip); |
| spin_unlock_irq(&chip->reg_lock); |
| } |
| if (!chip->rirb.cmds[addr]) { |
| smp_rmb(); |
| bus->rirb_error = 0; |
| return chip->rirb.res[addr]; /* the last value */ |
| } |
| if (time_after(jiffies, timeout)) |
| break; |
| if (bus->needs_damn_long_delay) |
| msleep(2); /* temporary workaround */ |
| else { |
| udelay(10); |
| cond_resched(); |
| } |
| } |
| |
| if (!chip->polling_mode) { |
| snd_printk(KERN_WARNING SFX "azx_get_response timeout, " |
| "switching to polling mode: last cmd=0x%08x\n", |
| chip->last_cmd[addr]); |
| chip->polling_mode = 1; |
| goto again; |
| } |
| |
| if (chip->msi) { |
| snd_printk(KERN_WARNING SFX "No response from codec, " |
| "disabling MSI: last cmd=0x%08x\n", |
| chip->last_cmd[addr]); |
| free_irq(chip->irq, chip); |
| chip->irq = -1; |
| pci_disable_msi(chip->pci); |
| chip->msi = 0; |
| if (azx_acquire_irq(chip, 1) < 0) { |
| bus->rirb_error = 1; |
| return -1; |
| } |
| goto again; |
| } |
| |
| if (chip->probing) { |
| /* If this critical timeout happens during the codec probing |
| * phase, this is likely an access to a non-existing codec |
| * slot. Better to return an error and reset the system. |
| */ |
| return -1; |
| } |
| |
| /* a fatal communication error; need either to reset or to fallback |
| * to the single_cmd mode |
| */ |
| bus->rirb_error = 1; |
| if (bus->allow_bus_reset && !bus->response_reset && !bus->in_reset) { |
| bus->response_reset = 1; |
| return -1; /* give a chance to retry */ |
| } |
| |
| snd_printk(KERN_ERR "hda_intel: azx_get_response timeout, " |
| "switching to single_cmd mode: last cmd=0x%08x\n", |
| chip->last_cmd[addr]); |
| chip->single_cmd = 1; |
| bus->response_reset = 0; |
| /* re-initialize CORB/RIRB */ |
| azx_free_cmd_io(chip); |
| azx_init_cmd_io(chip); |
| return -1; |
| } |
| |
| /* |
| * Use the single immediate command instead of CORB/RIRB for simplicity |
| * |
| * Note: according to Intel, this is not preferred use. The command was |
| * intended for the BIOS only, and may get confused with unsolicited |
| * responses. So, we shouldn't use it for normal operation from the |
| * driver. |
| * I left the codes, however, for debugging/testing purposes. |
| */ |
| |
| /* receive a response */ |
| static int azx_single_wait_for_response(struct azx *chip, unsigned int addr) |
| { |
| int timeout = 50; |
| |
| while (timeout--) { |
| /* check IRV busy bit */ |
| if (azx_readw(chip, IRS) & ICH6_IRS_VALID) { |
| /* reuse rirb.res as the response return value */ |
| chip->rirb.res[addr] = azx_readl(chip, IR); |
| return 0; |
| } |
| udelay(1); |
| } |
| if (printk_ratelimit()) |
| snd_printd(SFX "get_response timeout: IRS=0x%x\n", |
| azx_readw(chip, IRS)); |
| chip->rirb.res[addr] = -1; |
| return -EIO; |
| } |
| |
| /* send a command */ |
| static int azx_single_send_cmd(struct hda_bus *bus, u32 val) |
| { |
| struct azx *chip = bus->private_data; |
| unsigned int addr = azx_command_addr(val); |
| int timeout = 50; |
| |
| bus->rirb_error = 0; |
| while (timeout--) { |
| /* check ICB busy bit */ |
| if (!((azx_readw(chip, IRS) & ICH6_IRS_BUSY))) { |
| /* Clear IRV valid bit */ |
| azx_writew(chip, IRS, azx_readw(chip, IRS) | |
| ICH6_IRS_VALID); |
| azx_writel(chip, IC, val); |
| azx_writew(chip, IRS, azx_readw(chip, IRS) | |
| ICH6_IRS_BUSY); |
| return azx_single_wait_for_response(chip, addr); |
| } |
| udelay(1); |
| } |
| if (printk_ratelimit()) |
| snd_printd(SFX "send_cmd timeout: IRS=0x%x, val=0x%x\n", |
| azx_readw(chip, IRS), val); |
| return -EIO; |
| } |
| |
| /* receive a response */ |
| static unsigned int azx_single_get_response(struct hda_bus *bus, |
| unsigned int addr) |
| { |
| struct azx *chip = bus->private_data; |
| return chip->rirb.res[addr]; |
| } |
| |
| /* |
| * The below are the main callbacks from hda_codec. |
| * |
| * They are just the skeleton to call sub-callbacks according to the |
| * current setting of chip->single_cmd. |
| */ |
| |
| /* send a command */ |
| static int azx_send_cmd(struct hda_bus *bus, unsigned int val) |
| { |
| struct azx *chip = bus->private_data; |
| |
| chip->last_cmd[azx_command_addr(val)] = val; |
| if (chip->single_cmd) |
| return azx_single_send_cmd(bus, val); |
| else |
| return azx_corb_send_cmd(bus, val); |
| } |
| |
| /* get a response */ |
| static unsigned int azx_get_response(struct hda_bus *bus, |
| unsigned int addr) |
| { |
| struct azx *chip = bus->private_data; |
| if (chip->single_cmd) |
| return azx_single_get_response(bus, addr); |
| else |
| return azx_rirb_get_response(bus, addr); |
| } |
| |
| #ifdef CONFIG_SND_HDA_POWER_SAVE |
| static void azx_power_notify(struct hda_bus *bus); |
| #endif |
| |
| /* reset codec link */ |
| static int azx_reset(struct azx *chip) |
| { |
| int count; |
| |
| /* clear STATESTS */ |
| azx_writeb(chip, STATESTS, STATESTS_INT_MASK); |
| |
| /* reset controller */ |
| azx_writel(chip, GCTL, azx_readl(chip, GCTL) & ~ICH6_GCTL_RESET); |
| |
| count = 50; |
| while (azx_readb(chip, GCTL) && --count) |
| msleep(1); |
| |
| /* delay for >= 100us for codec PLL to settle per spec |
| * Rev 0.9 section 5.5.1 |
| */ |
| msleep(1); |
| |
| /* Bring controller out of reset */ |
| azx_writeb(chip, GCTL, azx_readb(chip, GCTL) | ICH6_GCTL_RESET); |
| |
| count = 50; |
| while (!azx_readb(chip, GCTL) && --count) |
| msleep(1); |
| |
| /* Brent Chartrand said to wait >= 540us for codecs to initialize */ |
| msleep(1); |
| |
| /* check to see if controller is ready */ |
| if (!azx_readb(chip, GCTL)) { |
| snd_printd(SFX "azx_reset: controller not ready!\n"); |
| return -EBUSY; |
| } |
| |
| /* Accept unsolicited responses */ |
| azx_writel(chip, GCTL, azx_readl(chip, GCTL) | ICH6_GCTL_UNSOL); |
| |
| /* detect codecs */ |
| if (!chip->codec_mask) { |
| chip->codec_mask = azx_readw(chip, STATESTS); |
| snd_printdd(SFX "codec_mask = 0x%x\n", chip->codec_mask); |
| } |
| |
| return 0; |
| } |
| |
| |
| /* |
| * Lowlevel interface |
| */ |
| |
| /* enable interrupts */ |
| static void azx_int_enable(struct azx *chip) |
| { |
| /* enable controller CIE and GIE */ |
| azx_writel(chip, INTCTL, azx_readl(chip, INTCTL) | |
| ICH6_INT_CTRL_EN | ICH6_INT_GLOBAL_EN); |
| } |
| |
| /* disable interrupts */ |
| static void azx_int_disable(struct azx *chip) |
| { |
| int i; |
| |
| /* disable interrupts in stream descriptor */ |
| for (i = 0; i < chip->num_streams; i++) { |
| struct azx_dev *azx_dev = &chip->azx_dev[i]; |
| azx_sd_writeb(azx_dev, SD_CTL, |
| azx_sd_readb(azx_dev, SD_CTL) & ~SD_INT_MASK); |
| } |
| |
| /* disable SIE for all streams */ |
| azx_writeb(chip, INTCTL, 0); |
| |
| /* disable controller CIE and GIE */ |
| azx_writel(chip, INTCTL, azx_readl(chip, INTCTL) & |
| ~(ICH6_INT_CTRL_EN | ICH6_INT_GLOBAL_EN)); |
| } |
| |
| /* clear interrupts */ |
| static void azx_int_clear(struct azx *chip) |
| { |
| int i; |
| |
| /* clear stream status */ |
| for (i = 0; i < chip->num_streams; i++) { |
| struct azx_dev *azx_dev = &chip->azx_dev[i]; |
| azx_sd_writeb(azx_dev, SD_STS, SD_INT_MASK); |
| } |
| |
| /* clear STATESTS */ |
| azx_writeb(chip, STATESTS, STATESTS_INT_MASK); |
| |
| /* clear rirb status */ |
| azx_writeb(chip, RIRBSTS, RIRB_INT_MASK); |
| |
| /* clear int status */ |
| azx_writel(chip, INTSTS, ICH6_INT_CTRL_EN | ICH6_INT_ALL_STREAM); |
| } |
| |
| /* start a stream */ |
| static void azx_stream_start(struct azx *chip, struct azx_dev *azx_dev) |
| { |
| /* |
| * Before stream start, initialize parameter |
| */ |
| azx_dev->insufficient = 1; |
| |
| /* enable SIE */ |
| azx_writeb(chip, INTCTL, |
| azx_readb(chip, INTCTL) | (1 << azx_dev->index)); |
| /* set DMA start and interrupt mask */ |
| azx_sd_writeb(azx_dev, SD_CTL, azx_sd_readb(azx_dev, SD_CTL) | |
| SD_CTL_DMA_START | SD_INT_MASK); |
| } |
| |
| /* stop DMA */ |
| static void azx_stream_clear(struct azx *chip, struct azx_dev *azx_dev) |
| { |
| azx_sd_writeb(azx_dev, SD_CTL, azx_sd_readb(azx_dev, SD_CTL) & |
| ~(SD_CTL_DMA_START | SD_INT_MASK)); |
| azx_sd_writeb(azx_dev, SD_STS, SD_INT_MASK); /* to be sure */ |
| } |
| |
| /* stop a stream */ |
| static void azx_stream_stop(struct azx *chip, struct azx_dev *azx_dev) |
| { |
| azx_stream_clear(chip, azx_dev); |
| /* disable SIE */ |
| azx_writeb(chip, INTCTL, |
| azx_readb(chip, INTCTL) & ~(1 << azx_dev->index)); |
| } |
| |
| |
| /* |
| * reset and start the controller registers |
| */ |
| static void azx_init_chip(struct azx *chip) |
| { |
| if (chip->initialized) |
| return; |
| |
| /* reset controller */ |
| azx_reset(chip); |
| |
| /* initialize interrupts */ |
| azx_int_clear(chip); |
| azx_int_enable(chip); |
| |
| /* initialize the codec command I/O */ |
| azx_init_cmd_io(chip); |
| |
| /* program the position buffer */ |
| azx_writel(chip, DPLBASE, (u32)chip->posbuf.addr); |
| azx_writel(chip, DPUBASE, upper_32_bits(chip->posbuf.addr)); |
| |
| chip->initialized = 1; |
| } |
| |
| /* |
| * initialize the PCI registers |
| */ |
| /* update bits in a PCI register byte */ |
| static void update_pci_byte(struct pci_dev *pci, unsigned int reg, |
| unsigned char mask, unsigned char val) |
| { |
| unsigned char data; |
| |
| pci_read_config_byte(pci, reg, &data); |
| data &= ~mask; |
| data |= (val & mask); |
| pci_write_config_byte(pci, reg, data); |
| } |
| |
| static void azx_init_pci(struct azx *chip) |
| { |
| unsigned short snoop; |
| |
| /* Clear bits 0-2 of PCI register TCSEL (at offset 0x44) |
| * TCSEL == Traffic Class Select Register, which sets PCI express QOS |
| * Ensuring these bits are 0 clears playback static on some HD Audio |
| * codecs |
| */ |
| update_pci_byte(chip->pci, ICH6_PCIREG_TCSEL, 0x07, 0); |
| |
| switch (chip->driver_type) { |
| case AZX_DRIVER_ATI: |
| /* For ATI SB450 azalia HD audio, we need to enable snoop */ |
| update_pci_byte(chip->pci, |
| ATI_SB450_HDAUDIO_MISC_CNTR2_ADDR, |
| 0x07, ATI_SB450_HDAUDIO_ENABLE_SNOOP); |
| break; |
| case AZX_DRIVER_NVIDIA: |
| /* For NVIDIA HDA, enable snoop */ |
| update_pci_byte(chip->pci, |
| NVIDIA_HDA_TRANSREG_ADDR, |
| 0x0f, NVIDIA_HDA_ENABLE_COHBITS); |
| update_pci_byte(chip->pci, |
| NVIDIA_HDA_ISTRM_COH, |
| 0x01, NVIDIA_HDA_ENABLE_COHBIT); |
| update_pci_byte(chip->pci, |
| NVIDIA_HDA_OSTRM_COH, |
| 0x01, NVIDIA_HDA_ENABLE_COHBIT); |
| break; |
| case AZX_DRIVER_SCH: |
| pci_read_config_word(chip->pci, INTEL_SCH_HDA_DEVC, &snoop); |
| if (snoop & INTEL_SCH_HDA_DEVC_NOSNOOP) { |
| pci_write_config_word(chip->pci, INTEL_SCH_HDA_DEVC, |
| snoop & (~INTEL_SCH_HDA_DEVC_NOSNOOP)); |
| pci_read_config_word(chip->pci, |
| INTEL_SCH_HDA_DEVC, &snoop); |
| snd_printdd(SFX "HDA snoop disabled, enabling ... %s\n", |
| (snoop & INTEL_SCH_HDA_DEVC_NOSNOOP) |
| ? "Failed" : "OK"); |
| } |
| break; |
| |
| } |
| } |
| |
| |
| static int azx_position_ok(struct azx *chip, struct azx_dev *azx_dev); |
| |
| /* |
| * interrupt handler |
| */ |
| static irqreturn_t azx_interrupt(int irq, void *dev_id) |
| { |
| struct azx *chip = dev_id; |
| struct azx_dev *azx_dev; |
| u32 status; |
| int i, ok; |
| |
| spin_lock(&chip->reg_lock); |
| |
| status = azx_readl(chip, INTSTS); |
| if (status == 0) { |
| spin_unlock(&chip->reg_lock); |
| return IRQ_NONE; |
| } |
| |
| for (i = 0; i < chip->num_streams; i++) { |
| azx_dev = &chip->azx_dev[i]; |
| if (status & azx_dev->sd_int_sta_mask) { |
| azx_sd_writeb(azx_dev, SD_STS, SD_INT_MASK); |
| if (!azx_dev->substream || !azx_dev->running) |
| continue; |
| /* check whether this IRQ is really acceptable */ |
| ok = azx_position_ok(chip, azx_dev); |
| if (ok == 1) { |
| azx_dev->irq_pending = 0; |
| spin_unlock(&chip->reg_lock); |
| snd_pcm_period_elapsed(azx_dev->substream); |
| spin_lock(&chip->reg_lock); |
| } else if (ok == 0 && chip->bus && chip->bus->workq) { |
| /* bogus IRQ, process it later */ |
| azx_dev->irq_pending = 1; |
| queue_work(chip->bus->workq, |
| &chip->irq_pending_work); |
| } |
| } |
| } |
| |
| /* clear rirb int */ |
| status = azx_readb(chip, RIRBSTS); |
| if (status & RIRB_INT_MASK) { |
| if (status & RIRB_INT_RESPONSE) |
| azx_update_rirb(chip); |
| azx_writeb(chip, RIRBSTS, RIRB_INT_MASK); |
| } |
| |
| #if 0 |
| /* clear state status int */ |
| if (azx_readb(chip, STATESTS) & 0x04) |
| azx_writeb(chip, STATESTS, 0x04); |
| #endif |
| spin_unlock(&chip->reg_lock); |
| |
| return IRQ_HANDLED; |
| } |
| |
| |
| /* |
| * set up a BDL entry |
| */ |
| static int setup_bdle(struct snd_pcm_substream *substream, |
| struct azx_dev *azx_dev, u32 **bdlp, |
| int ofs, int size, int with_ioc) |
| { |
| u32 *bdl = *bdlp; |
| |
| while (size > 0) { |
| dma_addr_t addr; |
| int chunk; |
| |
| if (azx_dev->frags >= AZX_MAX_BDL_ENTRIES) |
| return -EINVAL; |
| |
| addr = snd_pcm_sgbuf_get_addr(substream, ofs); |
| /* program the address field of the BDL entry */ |
| bdl[0] = cpu_to_le32((u32)addr); |
| bdl[1] = cpu_to_le32(upper_32_bits(addr)); |
| /* program the size field of the BDL entry */ |
| chunk = snd_pcm_sgbuf_get_chunk_size(substream, ofs, size); |
| bdl[2] = cpu_to_le32(chunk); |
| /* program the IOC to enable interrupt |
| * only when the whole fragment is processed |
| */ |
| size -= chunk; |
| bdl[3] = (size || !with_ioc) ? 0 : cpu_to_le32(0x01); |
| bdl += 4; |
| azx_dev->frags++; |
| ofs += chunk; |
| } |
| *bdlp = bdl; |
| return ofs; |
| } |
| |
| /* |
| * set up BDL entries |
| */ |
| static int azx_setup_periods(struct azx *chip, |
| struct snd_pcm_substream *substream, |
| struct azx_dev *azx_dev) |
| { |
| u32 *bdl; |
| int i, ofs, periods, period_bytes; |
| int pos_adj; |
| |
| /* reset BDL address */ |
| azx_sd_writel(azx_dev, SD_BDLPL, 0); |
| azx_sd_writel(azx_dev, SD_BDLPU, 0); |
| |
| period_bytes = azx_dev->period_bytes; |
| periods = azx_dev->bufsize / period_bytes; |
| |
| /* program the initial BDL entries */ |
| bdl = (u32 *)azx_dev->bdl.area; |
| ofs = 0; |
| azx_dev->frags = 0; |
| pos_adj = bdl_pos_adj[chip->dev_index]; |
| if (pos_adj > 0) { |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| int pos_align = pos_adj; |
| pos_adj = (pos_adj * runtime->rate + 47999) / 48000; |
| if (!pos_adj) |
| pos_adj = pos_align; |
| else |
| pos_adj = ((pos_adj + pos_align - 1) / pos_align) * |
| pos_align; |
| pos_adj = frames_to_bytes(runtime, pos_adj); |
| if (pos_adj >= period_bytes) { |
| snd_printk(KERN_WARNING SFX "Too big adjustment %d\n", |
| bdl_pos_adj[chip->dev_index]); |
| pos_adj = 0; |
| } else { |
| ofs = setup_bdle(substream, azx_dev, |
| &bdl, ofs, pos_adj, 1); |
| if (ofs < 0) |
| goto error; |
| } |
| } else |
| pos_adj = 0; |
| for (i = 0; i < periods; i++) { |
| if (i == periods - 1 && pos_adj) |
| ofs = setup_bdle(substream, azx_dev, &bdl, ofs, |
| period_bytes - pos_adj, 0); |
| else |
| ofs = setup_bdle(substream, azx_dev, &bdl, ofs, |
| period_bytes, 1); |
| if (ofs < 0) |
| goto error; |
| } |
| return 0; |
| |
| error: |
| snd_printk(KERN_ERR SFX "Too many BDL entries: buffer=%d, period=%d\n", |
| azx_dev->bufsize, period_bytes); |
| return -EINVAL; |
| } |
| |
| /* reset stream */ |
| static void azx_stream_reset(struct azx *chip, struct azx_dev *azx_dev) |
| { |
| unsigned char val; |
| int timeout; |
| |
| azx_stream_clear(chip, azx_dev); |
| |
| azx_sd_writeb(azx_dev, SD_CTL, azx_sd_readb(azx_dev, SD_CTL) | |
| SD_CTL_STREAM_RESET); |
| udelay(3); |
| timeout = 300; |
| while (!((val = azx_sd_readb(azx_dev, SD_CTL)) & SD_CTL_STREAM_RESET) && |
| --timeout) |
| ; |
| val &= ~SD_CTL_STREAM_RESET; |
| azx_sd_writeb(azx_dev, SD_CTL, val); |
| udelay(3); |
| |
| timeout = 300; |
| /* waiting for hardware to report that the stream is out of reset */ |
| while (((val = azx_sd_readb(azx_dev, SD_CTL)) & SD_CTL_STREAM_RESET) && |
| --timeout) |
| ; |
| |
| /* reset first position - may not be synced with hw at this time */ |
| *azx_dev->posbuf = 0; |
| } |
| |
| /* |
| * set up the SD for streaming |
| */ |
| static int azx_setup_controller(struct azx *chip, struct azx_dev *azx_dev) |
| { |
| /* make sure the run bit is zero for SD */ |
| azx_stream_clear(chip, azx_dev); |
| /* program the stream_tag */ |
| azx_sd_writel(azx_dev, SD_CTL, |
| (azx_sd_readl(azx_dev, SD_CTL) & ~SD_CTL_STREAM_TAG_MASK)| |
| (azx_dev->stream_tag << SD_CTL_STREAM_TAG_SHIFT)); |
| |
| /* program the length of samples in cyclic buffer */ |
| azx_sd_writel(azx_dev, SD_CBL, azx_dev->bufsize); |
| |
| /* program the stream format */ |
| /* this value needs to be the same as the one programmed */ |
| azx_sd_writew(azx_dev, SD_FORMAT, azx_dev->format_val); |
| |
| /* program the stream LVI (last valid index) of the BDL */ |
| azx_sd_writew(azx_dev, SD_LVI, azx_dev->frags - 1); |
| |
| /* program the BDL address */ |
| /* lower BDL address */ |
| azx_sd_writel(azx_dev, SD_BDLPL, (u32)azx_dev->bdl.addr); |
| /* upper BDL address */ |
| azx_sd_writel(azx_dev, SD_BDLPU, upper_32_bits(azx_dev->bdl.addr)); |
| |
| /* enable the position buffer */ |
| if (chip->position_fix == POS_FIX_POSBUF || |
| chip->position_fix == POS_FIX_AUTO || |
| chip->via_dmapos_patch) { |
| if (!(azx_readl(chip, DPLBASE) & ICH6_DPLBASE_ENABLE)) |
| azx_writel(chip, DPLBASE, |
| (u32)chip->posbuf.addr | ICH6_DPLBASE_ENABLE); |
| } |
| |
| /* set the interrupt enable bits in the descriptor control register */ |
| azx_sd_writel(azx_dev, SD_CTL, |
| azx_sd_readl(azx_dev, SD_CTL) | SD_INT_MASK); |
| |
| return 0; |
| } |
| |
| /* |
| * Probe the given codec address |
| */ |
| static int probe_codec(struct azx *chip, int addr) |
| { |
| unsigned int cmd = (addr << 28) | (AC_NODE_ROOT << 20) | |
| (AC_VERB_PARAMETERS << 8) | AC_PAR_VENDOR_ID; |
| unsigned int res; |
| |
| mutex_lock(&chip->bus->cmd_mutex); |
| chip->probing = 1; |
| azx_send_cmd(chip->bus, cmd); |
| res = azx_get_response(chip->bus, addr); |
| chip->probing = 0; |
| mutex_unlock(&chip->bus->cmd_mutex); |
| if (res == -1) |
| return -EIO; |
| snd_printdd(SFX "codec #%d probed OK\n", addr); |
| return 0; |
| } |
| |
| static int azx_attach_pcm_stream(struct hda_bus *bus, struct hda_codec *codec, |
| struct hda_pcm *cpcm); |
| static void azx_stop_chip(struct azx *chip); |
| |
| static void azx_bus_reset(struct hda_bus *bus) |
| { |
| struct azx *chip = bus->private_data; |
| |
| bus->in_reset = 1; |
| azx_stop_chip(chip); |
| azx_init_chip(chip); |
| #ifdef CONFIG_PM |
| if (chip->initialized) { |
| int i; |
| |
| for (i = 0; i < AZX_MAX_PCMS; i++) |
| snd_pcm_suspend_all(chip->pcm[i]); |
| snd_hda_suspend(chip->bus); |
| snd_hda_resume(chip->bus); |
| } |
| #endif |
| bus->in_reset = 0; |
| } |
| |
| /* |
| * Codec initialization |
| */ |
| |
| /* number of codec slots for each chipset: 0 = default slots (i.e. 4) */ |
| static unsigned int azx_max_codecs[AZX_NUM_DRIVERS] __devinitdata = { |
| [AZX_DRIVER_TERA] = 1, |
| }; |
| |
| static int __devinit azx_codec_create(struct azx *chip, const char *model) |
| { |
| struct hda_bus_template bus_temp; |
| int c, codecs, err; |
| int max_slots; |
| |
| memset(&bus_temp, 0, sizeof(bus_temp)); |
| bus_temp.private_data = chip; |
| bus_temp.modelname = model; |
| bus_temp.pci = chip->pci; |
| bus_temp.ops.command = azx_send_cmd; |
| bus_temp.ops.get_response = azx_get_response; |
| bus_temp.ops.attach_pcm = azx_attach_pcm_stream; |
| bus_temp.ops.bus_reset = azx_bus_reset; |
| #ifdef CONFIG_SND_HDA_POWER_SAVE |
| bus_temp.power_save = &power_save; |
| bus_temp.ops.pm_notify = azx_power_notify; |
| #endif |
| |
| err = snd_hda_bus_new(chip->card, &bus_temp, &chip->bus); |
| if (err < 0) |
| return err; |
| |
| if (chip->driver_type == AZX_DRIVER_NVIDIA) |
| chip->bus->needs_damn_long_delay = 1; |
| |
| codecs = 0; |
| max_slots = azx_max_codecs[chip->driver_type]; |
| if (!max_slots) |
| max_slots = AZX_MAX_CODECS; |
| |
| /* First try to probe all given codec slots */ |
| for (c = 0; c < max_slots; c++) { |
| if ((chip->codec_mask & (1 << c)) & chip->codec_probe_mask) { |
| if (probe_codec(chip, c) < 0) { |
| /* Some BIOSen give you wrong codec addresses |
| * that don't exist |
| */ |
| snd_printk(KERN_WARNING SFX |
| "Codec #%d probe error; " |
| "disabling it...\n", c); |
| chip->codec_mask &= ~(1 << c); |
| /* More badly, accessing to a non-existing |
| * codec often screws up the controller chip, |
| * and distrubs the further communications. |
| * Thus if an error occurs during probing, |
| * better to reset the controller chip to |
| * get back to the sanity state. |
| */ |
| azx_stop_chip(chip); |
| azx_init_chip(chip); |
| } |
| } |
| } |
| |
| /* Then create codec instances */ |
| for (c = 0; c < max_slots; c++) { |
| if ((chip->codec_mask & (1 << c)) & chip->codec_probe_mask) { |
| struct hda_codec *codec; |
| err = snd_hda_codec_new(chip->bus, c, &codec); |
| if (err < 0) |
| continue; |
| codecs++; |
| } |
| } |
| if (!codecs) { |
| snd_printk(KERN_ERR SFX "no codecs initialized\n"); |
| return -ENXIO; |
| } |
| return 0; |
| } |
| |
| /* configure each codec instance */ |
| static int __devinit azx_codec_configure(struct azx *chip) |
| { |
| struct hda_codec *codec; |
| list_for_each_entry(codec, &chip->bus->codec_list, list) { |
| snd_hda_codec_configure(codec); |
| } |
| return 0; |
| } |
| |
| |
| /* |
| * PCM support |
| */ |
| |
| /* assign a stream for the PCM */ |
| static inline struct azx_dev *azx_assign_device(struct azx *chip, int stream) |
| { |
| int dev, i, nums; |
| if (stream == SNDRV_PCM_STREAM_PLAYBACK) { |
| dev = chip->playback_index_offset; |
| nums = chip->playback_streams; |
| } else { |
| dev = chip->capture_index_offset; |
| nums = chip->capture_streams; |
| } |
| for (i = 0; i < nums; i++, dev++) |
| if (!chip->azx_dev[dev].opened) { |
| chip->azx_dev[dev].opened = 1; |
| return &chip->azx_dev[dev]; |
| } |
| return NULL; |
| } |
| |
| /* release the assigned stream */ |
| static inline void azx_release_device(struct azx_dev *azx_dev) |
| { |
| azx_dev->opened = 0; |
| } |
| |
| static struct snd_pcm_hardware azx_pcm_hw = { |
| .info = (SNDRV_PCM_INFO_MMAP | |
| SNDRV_PCM_INFO_INTERLEAVED | |
| SNDRV_PCM_INFO_BLOCK_TRANSFER | |
| SNDRV_PCM_INFO_MMAP_VALID | |
| /* No full-resume yet implemented */ |
| /* SNDRV_PCM_INFO_RESUME |*/ |
| SNDRV_PCM_INFO_PAUSE | |
| SNDRV_PCM_INFO_SYNC_START), |
| .formats = SNDRV_PCM_FMTBIT_S16_LE, |
| .rates = SNDRV_PCM_RATE_48000, |
| .rate_min = 48000, |
| .rate_max = 48000, |
| .channels_min = 2, |
| .channels_max = 2, |
| .buffer_bytes_max = AZX_MAX_BUF_SIZE, |
| .period_bytes_min = 128, |
| .period_bytes_max = AZX_MAX_BUF_SIZE / 2, |
| .periods_min = 2, |
| .periods_max = AZX_MAX_FRAG, |
| .fifo_size = 0, |
| }; |
| |
| struct azx_pcm { |
| struct azx *chip; |
| struct hda_codec *codec; |
| struct hda_pcm_stream *hinfo[2]; |
| }; |
| |
| static int azx_pcm_open(struct snd_pcm_substream *substream) |
| { |
| struct azx_pcm *apcm = snd_pcm_substream_chip(substream); |
| struct hda_pcm_stream *hinfo = apcm->hinfo[substream->stream]; |
| struct azx *chip = apcm->chip; |
| struct azx_dev *azx_dev; |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| unsigned long flags; |
| int err; |
| |
| mutex_lock(&chip->open_mutex); |
| azx_dev = azx_assign_device(chip, substream->stream); |
| if (azx_dev == NULL) { |
| mutex_unlock(&chip->open_mutex); |
| return -EBUSY; |
| } |
| runtime->hw = azx_pcm_hw; |
| runtime->hw.channels_min = hinfo->channels_min; |
| runtime->hw.channels_max = hinfo->channels_max; |
| runtime->hw.formats = hinfo->formats; |
| runtime->hw.rates = hinfo->rates; |
| snd_pcm_limit_hw_rates(runtime); |
| snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS); |
| snd_pcm_hw_constraint_step(runtime, 0, SNDRV_PCM_HW_PARAM_BUFFER_BYTES, |
| 128); |
| snd_pcm_hw_constraint_step(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_BYTES, |
| 128); |
| snd_hda_power_up(apcm->codec); |
| err = hinfo->ops.open(hinfo, apcm->codec, substream); |
| if (err < 0) { |
| azx_release_device(azx_dev); |
| snd_hda_power_down(apcm->codec); |
| mutex_unlock(&chip->open_mutex); |
| return err; |
| } |
| snd_pcm_limit_hw_rates(runtime); |
| /* sanity check */ |
| if (snd_BUG_ON(!runtime->hw.channels_min) || |
| snd_BUG_ON(!runtime->hw.channels_max) || |
| snd_BUG_ON(!runtime->hw.formats) || |
| snd_BUG_ON(!runtime->hw.rates)) { |
| azx_release_device(azx_dev); |
| hinfo->ops.close(hinfo, apcm->codec, substream); |
| snd_hda_power_down(apcm->codec); |
| mutex_unlock(&chip->open_mutex); |
| return -EINVAL; |
| } |
| spin_lock_irqsave(&chip->reg_lock, flags); |
| azx_dev->substream = substream; |
| azx_dev->running = 0; |
| spin_unlock_irqrestore(&chip->reg_lock, flags); |
| |
| runtime->private_data = azx_dev; |
| snd_pcm_set_sync(substream); |
| mutex_unlock(&chip->open_mutex); |
| return 0; |
| } |
| |
| static int azx_pcm_close(struct snd_pcm_substream *substream) |
| { |
| struct azx_pcm *apcm = snd_pcm_substream_chip(substream); |
| struct hda_pcm_stream *hinfo = apcm->hinfo[substream->stream]; |
| struct azx *chip = apcm->chip; |
| struct azx_dev *azx_dev = get_azx_dev(substream); |
| unsigned long flags; |
| |
| mutex_lock(&chip->open_mutex); |
| spin_lock_irqsave(&chip->reg_lock, flags); |
| azx_dev->substream = NULL; |
| azx_dev->running = 0; |
| spin_unlock_irqrestore(&chip->reg_lock, flags); |
| azx_release_device(azx_dev); |
| hinfo->ops.close(hinfo, apcm->codec, substream); |
| snd_hda_power_down(apcm->codec); |
| mutex_unlock(&chip->open_mutex); |
| return 0; |
| } |
| |
| static int azx_pcm_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *hw_params) |
| { |
| struct azx_dev *azx_dev = get_azx_dev(substream); |
| |
| azx_dev->bufsize = 0; |
| azx_dev->period_bytes = 0; |
| azx_dev->format_val = 0; |
| return snd_pcm_lib_malloc_pages(substream, |
| params_buffer_bytes(hw_params)); |
| } |
| |
| static int azx_pcm_hw_free(struct snd_pcm_substream *substream) |
| { |
| struct azx_pcm *apcm = snd_pcm_substream_chip(substream); |
| struct azx_dev *azx_dev = get_azx_dev(substream); |
| struct hda_pcm_stream *hinfo = apcm->hinfo[substream->stream]; |
| |
| /* reset BDL address */ |
| azx_sd_writel(azx_dev, SD_BDLPL, 0); |
| azx_sd_writel(azx_dev, SD_BDLPU, 0); |
| azx_sd_writel(azx_dev, SD_CTL, 0); |
| azx_dev->bufsize = 0; |
| azx_dev->period_bytes = 0; |
| azx_dev->format_val = 0; |
| |
| hinfo->ops.cleanup(hinfo, apcm->codec, substream); |
| |
| return snd_pcm_lib_free_pages(substream); |
| } |
| |
| static int azx_pcm_prepare(struct snd_pcm_substream *substream) |
| { |
| struct azx_pcm *apcm = snd_pcm_substream_chip(substream); |
| struct azx *chip = apcm->chip; |
| struct azx_dev *azx_dev = get_azx_dev(substream); |
| struct hda_pcm_stream *hinfo = apcm->hinfo[substream->stream]; |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| unsigned int bufsize, period_bytes, format_val; |
| int err; |
| |
| azx_stream_reset(chip, azx_dev); |
| format_val = snd_hda_calc_stream_format(runtime->rate, |
| runtime->channels, |
| runtime->format, |
| hinfo->maxbps); |
| if (!format_val) { |
| snd_printk(KERN_ERR SFX |
| "invalid format_val, rate=%d, ch=%d, format=%d\n", |
| runtime->rate, runtime->channels, runtime->format); |
| return -EINVAL; |
| } |
| |
| bufsize = snd_pcm_lib_buffer_bytes(substream); |
| period_bytes = snd_pcm_lib_period_bytes(substream); |
| |
| snd_printdd(SFX "azx_pcm_prepare: bufsize=0x%x, format=0x%x\n", |
| bufsize, format_val); |
| |
| if (bufsize != azx_dev->bufsize || |
| period_bytes != azx_dev->period_bytes || |
| format_val != azx_dev->format_val) { |
| azx_dev->bufsize = bufsize; |
| azx_dev->period_bytes = period_bytes; |
| azx_dev->format_val = format_val; |
| err = azx_setup_periods(chip, substream, azx_dev); |
| if (err < 0) |
| return err; |
| } |
| |
| azx_dev->min_jiffies = (runtime->period_size * HZ) / |
| (runtime->rate * 2); |
| azx_setup_controller(chip, azx_dev); |
| if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) |
| azx_dev->fifo_size = azx_sd_readw(azx_dev, SD_FIFOSIZE) + 1; |
| else |
| azx_dev->fifo_size = 0; |
| |
| return hinfo->ops.prepare(hinfo, apcm->codec, azx_dev->stream_tag, |
| azx_dev->format_val, substream); |
| } |
| |
| static int azx_pcm_trigger(struct snd_pcm_substream *substream, int cmd) |
| { |
| struct azx_pcm *apcm = snd_pcm_substream_chip(substream); |
| struct azx *chip = apcm->chip; |
| struct azx_dev *azx_dev; |
| struct snd_pcm_substream *s; |
| int rstart = 0, start, nsync = 0, sbits = 0; |
| int nwait, timeout; |
| |
| switch (cmd) { |
| case SNDRV_PCM_TRIGGER_START: |
| rstart = 1; |
| case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: |
| case SNDRV_PCM_TRIGGER_RESUME: |
| start = 1; |
| break; |
| case SNDRV_PCM_TRIGGER_PAUSE_PUSH: |
| case SNDRV_PCM_TRIGGER_SUSPEND: |
| case SNDRV_PCM_TRIGGER_STOP: |
| start = 0; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| snd_pcm_group_for_each_entry(s, substream) { |
| if (s->pcm->card != substream->pcm->card) |
| continue; |
| azx_dev = get_azx_dev(s); |
| sbits |= 1 << azx_dev->index; |
| nsync++; |
| snd_pcm_trigger_done(s, substream); |
| } |
| |
| spin_lock(&chip->reg_lock); |
| if (nsync > 1) { |
| /* first, set SYNC bits of corresponding streams */ |
| azx_writel(chip, SYNC, azx_readl(chip, SYNC) | sbits); |
| } |
| snd_pcm_group_for_each_entry(s, substream) { |
| if (s->pcm->card != substream->pcm->card) |
| continue; |
| azx_dev = get_azx_dev(s); |
| if (rstart) { |
| azx_dev->start_flag = 1; |
| azx_dev->start_jiffies = jiffies + azx_dev->min_jiffies; |
| } |
| if (start) |
| azx_stream_start(chip, azx_dev); |
| else |
| azx_stream_stop(chip, azx_dev); |
| azx_dev->running = start; |
| } |
| spin_unlock(&chip->reg_lock); |
| if (start) { |
| if (nsync == 1) |
| return 0; |
| /* wait until all FIFOs get ready */ |
| for (timeout = 5000; timeout; timeout--) { |
| nwait = 0; |
| snd_pcm_group_for_each_entry(s, substream) { |
| if (s->pcm->card != substream->pcm->card) |
| continue; |
| azx_dev = get_azx_dev(s); |
| if (!(azx_sd_readb(azx_dev, SD_STS) & |
| SD_STS_FIFO_READY)) |
| nwait++; |
| } |
| if (!nwait) |
| break; |
| cpu_relax(); |
| } |
| } else { |
| /* wait until all RUN bits are cleared */ |
| for (timeout = 5000; timeout; timeout--) { |
| nwait = 0; |
| snd_pcm_group_for_each_entry(s, substream) { |
| if (s->pcm->card != substream->pcm->card) |
| continue; |
| azx_dev = get_azx_dev(s); |
| if (azx_sd_readb(azx_dev, SD_CTL) & |
| SD_CTL_DMA_START) |
| nwait++; |
| } |
| if (!nwait) |
| break; |
| cpu_relax(); |
| } |
| } |
| if (nsync > 1) { |
| spin_lock(&chip->reg_lock); |
| /* reset SYNC bits */ |
| azx_writel(chip, SYNC, azx_readl(chip, SYNC) & ~sbits); |
| spin_unlock(&chip->reg_lock); |
| } |
| return 0; |
| } |
| |
| /* get the current DMA position with correction on VIA chips */ |
| static unsigned int azx_via_get_position(struct azx *chip, |
| struct azx_dev *azx_dev) |
| { |
| unsigned int link_pos, mini_pos, bound_pos; |
| unsigned int mod_link_pos, mod_dma_pos, mod_mini_pos; |
| unsigned int fifo_size; |
| |
| link_pos = azx_sd_readl(azx_dev, SD_LPIB); |
| if (azx_dev->index >= 4) { |
| /* Playback, no problem using link position */ |
| return link_pos; |
| } |
| |
| /* Capture */ |
| /* For new chipset, |
| * use mod to get the DMA position just like old chipset |
| */ |
| mod_dma_pos = le32_to_cpu(*azx_dev->posbuf); |
| mod_dma_pos %= azx_dev->period_bytes; |
| |
| /* azx_dev->fifo_size can't get FIFO size of in stream. |
| * Get from base address + offset. |
| */ |
| fifo_size = readw(chip->remap_addr + VIA_IN_STREAM0_FIFO_SIZE_OFFSET); |
| |
| if (azx_dev->insufficient) { |
| /* Link position never gather than FIFO size */ |
| if (link_pos <= fifo_size) |
| return 0; |
| |
| azx_dev->insufficient = 0; |
| } |
| |
| if (link_pos <= fifo_size) |
| mini_pos = azx_dev->bufsize + link_pos - fifo_size; |
| else |
| mini_pos = link_pos - fifo_size; |
| |
| /* Find nearest previous boudary */ |
| mod_mini_pos = mini_pos % azx_dev->period_bytes; |
| mod_link_pos = link_pos % azx_dev->period_bytes; |
| if (mod_link_pos >= fifo_size) |
| bound_pos = link_pos - mod_link_pos; |
| else if (mod_dma_pos >= mod_mini_pos) |
| bound_pos = mini_pos - mod_mini_pos; |
| else { |
| bound_pos = mini_pos - mod_mini_pos + azx_dev->period_bytes; |
| if (bound_pos >= azx_dev->bufsize) |
| bound_pos = 0; |
| } |
| |
| /* Calculate real DMA position we want */ |
| return bound_pos + mod_dma_pos; |
| } |
| |
| static unsigned int azx_get_position(struct azx *chip, |
| struct azx_dev *azx_dev) |
| { |
| unsigned int pos; |
| |
| if (chip->via_dmapos_patch) |
| pos = azx_via_get_position(chip, azx_dev); |
| else if (chip->position_fix == POS_FIX_POSBUF || |
| chip->position_fix == POS_FIX_AUTO) { |
| /* use the position buffer */ |
| pos = le32_to_cpu(*azx_dev->posbuf); |
| } else { |
| /* read LPIB */ |
| pos = azx_sd_readl(azx_dev, SD_LPIB); |
| } |
| if (pos >= azx_dev->bufsize) |
| pos = 0; |
| return pos; |
| } |
| |
| static snd_pcm_uframes_t azx_pcm_pointer(struct snd_pcm_substream *substream) |
| { |
| struct azx_pcm *apcm = snd_pcm_substream_chip(substream); |
| struct azx *chip = apcm->chip; |
| struct azx_dev *azx_dev = get_azx_dev(substream); |
| return bytes_to_frames(substream->runtime, |
| azx_get_position(chip, azx_dev)); |
| } |
| |
| /* |
| * Check whether the current DMA position is acceptable for updating |
| * periods. Returns non-zero if it's OK. |
| * |
| * Many HD-audio controllers appear pretty inaccurate about |
| * the update-IRQ timing. The IRQ is issued before actually the |
| * data is processed. So, we need to process it afterwords in a |
| * workqueue. |
| */ |
| static int azx_position_ok(struct azx *chip, struct azx_dev *azx_dev) |
| { |
| unsigned int pos; |
| |
| if (azx_dev->start_flag && |
| time_before_eq(jiffies, azx_dev->start_jiffies)) |
| return -1; /* bogus (too early) interrupt */ |
| azx_dev->start_flag = 0; |
| |
| pos = azx_get_position(chip, azx_dev); |
| if (chip->position_fix == POS_FIX_AUTO) { |
| if (!pos) { |
| printk(KERN_WARNING |
| "hda-intel: Invalid position buffer, " |
| "using LPIB read method instead.\n"); |
| chip->position_fix = POS_FIX_LPIB; |
| pos = azx_get_position(chip, azx_dev); |
| } else |
| chip->position_fix = POS_FIX_POSBUF; |
| } |
| |
| if (!bdl_pos_adj[chip->dev_index]) |
| return 1; /* no delayed ack */ |
| if (pos % azx_dev->period_bytes > azx_dev->period_bytes / 2) |
| return 0; /* NG - it's below the period boundary */ |
| return 1; /* OK, it's fine */ |
| } |
| |
| /* |
| * The work for pending PCM period updates. |
| */ |
| static void azx_irq_pending_work(struct work_struct *work) |
| { |
| struct azx *chip = container_of(work, struct azx, irq_pending_work); |
| int i, pending; |
| |
| if (!chip->irq_pending_warned) { |
| printk(KERN_WARNING |
| "hda-intel: IRQ timing workaround is activated " |
| "for card #%d. Suggest a bigger bdl_pos_adj.\n", |
| chip->card->number); |
| chip->irq_pending_warned = 1; |
| } |
| |
| for (;;) { |
| pending = 0; |
| spin_lock_irq(&chip->reg_lock); |
| for (i = 0; i < chip->num_streams; i++) { |
| struct azx_dev *azx_dev = &chip->azx_dev[i]; |
| if (!azx_dev->irq_pending || |
| !azx_dev->substream || |
| !azx_dev->running) |
| continue; |
| if (azx_position_ok(chip, azx_dev)) { |
| azx_dev->irq_pending = 0; |
| spin_unlock(&chip->reg_lock); |
| snd_pcm_period_elapsed(azx_dev->substream); |
| spin_lock(&chip->reg_lock); |
| } else |
| pending++; |
| } |
| spin_unlock_irq(&chip->reg_lock); |
| if (!pending) |
| return; |
| cond_resched(); |
| } |
| } |
| |
| /* clear irq_pending flags and assure no on-going workq */ |
| static void azx_clear_irq_pending(struct azx *chip) |
| { |
| int i; |
| |
| spin_lock_irq(&chip->reg_lock); |
| for (i = 0; i < chip->num_streams; i++) |
| chip->azx_dev[i].irq_pending = 0; |
| spin_unlock_irq(&chip->reg_lock); |
| } |
| |
| static struct snd_pcm_ops azx_pcm_ops = { |
| .open = azx_pcm_open, |
| .close = azx_pcm_close, |
| .ioctl = snd_pcm_lib_ioctl, |
| .hw_params = azx_pcm_hw_params, |
| .hw_free = azx_pcm_hw_free, |
| .prepare = azx_pcm_prepare, |
| .trigger = azx_pcm_trigger, |
| .pointer = azx_pcm_pointer, |
| .page = snd_pcm_sgbuf_ops_page, |
| }; |
| |
| static void azx_pcm_free(struct snd_pcm *pcm) |
| { |
| struct azx_pcm *apcm = pcm->private_data; |
| if (apcm) { |
| apcm->chip->pcm[pcm->device] = NULL; |
| kfree(apcm); |
| } |
| } |
| |
| static int |
| azx_attach_pcm_stream(struct hda_bus *bus, struct hda_codec *codec, |
| struct hda_pcm *cpcm) |
| { |
| struct azx *chip = bus->private_data; |
| struct snd_pcm *pcm; |
| struct azx_pcm *apcm; |
| int pcm_dev = cpcm->device; |
| int s, err; |
| |
| if (pcm_dev >= AZX_MAX_PCMS) { |
| snd_printk(KERN_ERR SFX "Invalid PCM device number %d\n", |
| pcm_dev); |
| return -EINVAL; |
| } |
| if (chip->pcm[pcm_dev]) { |
| snd_printk(KERN_ERR SFX "PCM %d already exists\n", pcm_dev); |
| return -EBUSY; |
| } |
| err = snd_pcm_new(chip->card, cpcm->name, pcm_dev, |
| cpcm->stream[SNDRV_PCM_STREAM_PLAYBACK].substreams, |
| cpcm->stream[SNDRV_PCM_STREAM_CAPTURE].substreams, |
| &pcm); |
| if (err < 0) |
| return err; |
| strlcpy(pcm->name, cpcm->name, sizeof(pcm->name)); |
| apcm = kzalloc(sizeof(*apcm), GFP_KERNEL); |
| if (apcm == NULL) |
| return -ENOMEM; |
| apcm->chip = chip; |
| apcm->codec = codec; |
| pcm->private_data = apcm; |
| pcm->private_free = azx_pcm_free; |
| if (cpcm->pcm_type == HDA_PCM_TYPE_MODEM) |
| pcm->dev_class = SNDRV_PCM_CLASS_MODEM; |
| chip->pcm[pcm_dev] = pcm; |
| cpcm->pcm = pcm; |
| for (s = 0; s < 2; s++) { |
| apcm->hinfo[s] = &cpcm->stream[s]; |
| if (cpcm->stream[s].substreams) |
| snd_pcm_set_ops(pcm, s, &azx_pcm_ops); |
| } |
| /* buffer pre-allocation */ |
| snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV_SG, |
| snd_dma_pci_data(chip->pci), |
| 1024 * 64, 32 * 1024 * 1024); |
| return 0; |
| } |
| |
| /* |
| * mixer creation - all stuff is implemented in hda module |
| */ |
| static int __devinit azx_mixer_create(struct azx *chip) |
| { |
| return snd_hda_build_controls(chip->bus); |
| } |
| |
| |
| /* |
| * initialize SD streams |
| */ |
| static int __devinit azx_init_stream(struct azx *chip) |
| { |
| int i; |
| |
| /* initialize each stream (aka device) |
| * assign the starting bdl address to each stream (device) |
| * and initialize |
| */ |
| for (i = 0; i < chip->num_streams; i++) { |
| struct azx_dev *azx_dev = &chip->azx_dev[i]; |
| azx_dev->posbuf = (u32 __iomem *)(chip->posbuf.area + i * 8); |
| /* offset: SDI0=0x80, SDI1=0xa0, ... SDO3=0x160 */ |
| azx_dev->sd_addr = chip->remap_addr + (0x20 * i + 0x80); |
| /* int mask: SDI0=0x01, SDI1=0x02, ... SDO3=0x80 */ |
| azx_dev->sd_int_sta_mask = 1 << i; |
| /* stream tag: must be non-zero and unique */ |
| azx_dev->index = i; |
| azx_dev->stream_tag = i + 1; |
| } |
| |
| return 0; |
| } |
| |
| static int azx_acquire_irq(struct azx *chip, int do_disconnect) |
| { |
| if (request_irq(chip->pci->irq, azx_interrupt, |
| chip->msi ? 0 : IRQF_SHARED, |
| "HDA Intel", chip)) { |
| printk(KERN_ERR "hda-intel: unable to grab IRQ %d, " |
| "disabling device\n", chip->pci->irq); |
| if (do_disconnect) |
| snd_card_disconnect(chip->card); |
| return -1; |
| } |
| chip->irq = chip->pci->irq; |
| pci_intx(chip->pci, !chip->msi); |
| return 0; |
| } |
| |
| |
| static void azx_stop_chip(struct azx *chip) |
| { |
| if (!chip->initialized) |
| return; |
| |
| /* disable interrupts */ |
| azx_int_disable(chip); |
| azx_int_clear(chip); |
| |
| /* disable CORB/RIRB */ |
| azx_free_cmd_io(chip); |
| |
| /* disable position buffer */ |
| azx_writel(chip, DPLBASE, 0); |
| azx_writel(chip, DPUBASE, 0); |
| |
| chip->initialized = 0; |
| } |
| |
| #ifdef CONFIG_SND_HDA_POWER_SAVE |
| /* power-up/down the controller */ |
| static void azx_power_notify(struct hda_bus *bus) |
| { |
| struct azx *chip = bus->private_data; |
| struct hda_codec *c; |
| int power_on = 0; |
| |
| list_for_each_entry(c, &bus->codec_list, list) { |
| if (c->power_on) { |
| power_on = 1; |
| break; |
| } |
| } |
| if (power_on) |
| azx_init_chip(chip); |
| else if (chip->running && power_save_controller) |
| azx_stop_chip(chip); |
| } |
| #endif /* CONFIG_SND_HDA_POWER_SAVE */ |
| |
| #ifdef CONFIG_PM |
| /* |
| * power management |
| */ |
| |
| static int snd_hda_codecs_inuse(struct hda_bus *bus) |
| { |
| struct hda_codec *codec; |
| |
| list_for_each_entry(codec, &bus->codec_list, list) { |
| if (snd_hda_codec_needs_resume(codec)) |
| return 1; |
| } |
| return 0; |
| } |
| |
| static int azx_suspend(struct pci_dev *pci, pm_message_t state) |
| { |
| struct snd_card *card = pci_get_drvdata(pci); |
| struct azx *chip = card->private_data; |
| int i; |
| |
| snd_power_change_state(card, SNDRV_CTL_POWER_D3hot); |
| azx_clear_irq_pending(chip); |
| for (i = 0; i < AZX_MAX_PCMS; i++) |
| snd_pcm_suspend_all(chip->pcm[i]); |
| if (chip->initialized) |
| snd_hda_suspend(chip->bus); |
| azx_stop_chip(chip); |
| if (chip->irq >= 0) { |
| free_irq(chip->irq, chip); |
| chip->irq = -1; |
| } |
| if (chip->msi) |
| pci_disable_msi(chip->pci); |
| pci_disable_device(pci); |
| pci_save_state(pci); |
| pci_set_power_state(pci, pci_choose_state(pci, state)); |
| return 0; |
| } |
| |
| static int azx_resume(struct pci_dev *pci) |
| { |
| struct snd_card *card = pci_get_drvdata(pci); |
| struct azx *chip = card->private_data; |
| |
| pci_set_power_state(pci, PCI_D0); |
| pci_restore_state(pci); |
| if (pci_enable_device(pci) < 0) { |
| printk(KERN_ERR "hda-intel: pci_enable_device failed, " |
| "disabling device\n"); |
| snd_card_disconnect(card); |
| return -EIO; |
| } |
| pci_set_master(pci); |
| if (chip->msi) |
| if (pci_enable_msi(pci) < 0) |
| chip->msi = 0; |
| if (azx_acquire_irq(chip, 1) < 0) |
| return -EIO; |
| azx_init_pci(chip); |
| |
| if (snd_hda_codecs_inuse(chip->bus)) |
| azx_init_chip(chip); |
| |
| snd_hda_resume(chip->bus); |
| snd_power_change_state(card, SNDRV_CTL_POWER_D0); |
| return 0; |
| } |
| #endif /* CONFIG_PM */ |
| |
| |
| /* |
| * reboot notifier for hang-up problem at power-down |
| */ |
| static int azx_halt(struct notifier_block *nb, unsigned long event, void *buf) |
| { |
| struct azx *chip = container_of(nb, struct azx, reboot_notifier); |
| azx_stop_chip(chip); |
| return NOTIFY_OK; |
| } |
| |
| static void azx_notifier_register(struct azx *chip) |
| { |
| chip->reboot_notifier.notifier_call = azx_halt; |
| register_reboot_notifier(&chip->reboot_notifier); |
| } |
| |
| static void azx_notifier_unregister(struct azx *chip) |
| { |
| if (chip->reboot_notifier.notifier_call) |
| unregister_reboot_notifier(&chip->reboot_notifier); |
| } |
| |
| /* |
| * destructor |
| */ |
| static int azx_free(struct azx *chip) |
| { |
| int i; |
| |
| azx_notifier_unregister(chip); |
| |
| if (chip->initialized) { |
| azx_clear_irq_pending(chip); |
| for (i = 0; i < chip->num_streams; i++) |
| azx_stream_stop(chip, &chip->azx_dev[i]); |
| azx_stop_chip(chip); |
| } |
| |
| if (chip->irq >= 0) |
| free_irq(chip->irq, (void*)chip); |
| if (chip->msi) |
| pci_disable_msi(chip->pci); |
| if (chip->remap_addr) |
| iounmap(chip->remap_addr); |
| |
| if (chip->azx_dev) { |
| for (i = 0; i < chip->num_streams; i++) |
| if (chip->azx_dev[i].bdl.area) |
| snd_dma_free_pages(&chip->azx_dev[i].bdl); |
| } |
| if (chip->rb.area) |
| snd_dma_free_pages(&chip->rb); |
| if (chip->posbuf.area) |
| snd_dma_free_pages(&chip->posbuf); |
| pci_release_regions(chip->pci); |
| pci_disable_device(chip->pci); |
| kfree(chip->azx_dev); |
| kfree(chip); |
| |
| return 0; |
| } |
| |
| static int azx_dev_free(struct snd_device *device) |
| { |
| return azx_free(device->device_data); |
| } |
| |
| /* |
| * white/black-listing for position_fix |
| */ |
| static struct snd_pci_quirk position_fix_list[] __devinitdata = { |
| SND_PCI_QUIRK(0x1028, 0x01cc, "Dell D820", POS_FIX_LPIB), |
| SND_PCI_QUIRK(0x1028, 0x01de, "Dell Precision 390", POS_FIX_LPIB), |
| SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_LPIB), |
| {} |
| }; |
| |
| static int __devinit check_position_fix(struct azx *chip, int fix) |
| { |
| const struct snd_pci_quirk *q; |
| |
| switch (fix) { |
| case POS_FIX_LPIB: |
| case POS_FIX_POSBUF: |
| return fix; |
| } |
| |
| /* Check VIA/ATI HD Audio Controller exist */ |
| switch (chip->driver_type) { |
| case AZX_DRIVER_VIA: |
| case AZX_DRIVER_ATI: |
| chip->via_dmapos_patch = 1; |
| /* Use link position directly, avoid any transfer problem. */ |
| return POS_FIX_LPIB; |
| } |
| chip->via_dmapos_patch = 0; |
| |
| q = snd_pci_quirk_lookup(chip->pci, position_fix_list); |
| if (q) { |
| printk(KERN_INFO |
| "hda_intel: position_fix set to %d " |
| "for device %04x:%04x\n", |
| q->value, q->subvendor, q->subdevice); |
| return q->value; |
| } |
| return POS_FIX_AUTO; |
| } |
| |
| /* |
| * black-lists for probe_mask |
| */ |
| static struct snd_pci_quirk probe_mask_list[] __devinitdata = { |
| /* Thinkpad often breaks the controller communication when accessing |
| * to the non-working (or non-existing) modem codec slot. |
| */ |
| SND_PCI_QUIRK(0x1014, 0x05b7, "Thinkpad Z60", 0x01), |
| SND_PCI_QUIRK(0x17aa, 0x2010, "Thinkpad X/T/R60", 0x01), |
| SND_PCI_QUIRK(0x17aa, 0x20ac, "Thinkpad X/T/R61", 0x01), |
| /* broken BIOS */ |
| SND_PCI_QUIRK(0x1028, 0x20ac, "Dell Studio Desktop", 0x01), |
| /* including bogus ALC268 in slot#2 that conflicts with ALC888 */ |
| SND_PCI_QUIRK(0x17c0, 0x4085, "Medion MD96630", 0x01), |
| /* forced codec slots */ |
| SND_PCI_QUIRK(0x1043, 0x1262, "ASUS W5Fm", 0x103), |
| SND_PCI_QUIRK(0x1046, 0x1262, "ASUS W5F", 0x103), |
| {} |
| }; |
| |
| #define AZX_FORCE_CODEC_MASK 0x100 |
| |
| static void __devinit check_probe_mask(struct azx *chip, int dev) |
| { |
| const struct snd_pci_quirk *q; |
| |
| chip->codec_probe_mask = probe_mask[dev]; |
| if (chip->codec_probe_mask == -1) { |
| q = snd_pci_quirk_lookup(chip->pci, probe_mask_list); |
| if (q) { |
| printk(KERN_INFO |
| "hda_intel: probe_mask set to 0x%x " |
| "for device %04x:%04x\n", |
| q->value, q->subvendor, q->subdevice); |
| chip->codec_probe_mask = q->value; |
| } |
| } |
| |
| /* check forced option */ |
| if (chip->codec_probe_mask != -1 && |
| (chip->codec_probe_mask & AZX_FORCE_CODEC_MASK)) { |
| chip->codec_mask = chip->codec_probe_mask & 0xff; |
| printk(KERN_INFO "hda_intel: codec_mask forced to 0x%x\n", |
| chip->codec_mask); |
| } |
| } |
| |
| /* |
| * white/black-list for enable_msi |
| */ |
| static struct snd_pci_quirk msi_black_list[] __devinitdata = { |
| {} |
| }; |
| |
| static void __devinit check_msi(struct azx *chip) |
| { |
| const struct snd_pci_quirk *q; |
| |
| if (enable_msi >= 0) { |
| chip->msi = !!enable_msi; |
| return; |
| } |
| chip->msi = 1; /* enable MSI as default */ |
| q = snd_pci_quirk_lookup(chip->pci, msi_black_list); |
| if (q) { |
| printk(KERN_INFO |
| "hda_intel: msi for device %04x:%04x set to %d\n", |
| q->subvendor, q->subdevice, q->value); |
| chip->msi = q->value; |
| } |
| } |
| |
| |
| /* |
| * constructor |
| */ |
| static int __devinit azx_create(struct snd_card *card, struct pci_dev *pci, |
| int dev, int driver_type, |
| struct azx **rchip) |
| { |
| struct azx *chip; |
| int i, err; |
| unsigned short gcap; |
| static struct snd_device_ops ops = { |
| .dev_free = azx_dev_free, |
| }; |
| |
| *rchip = NULL; |
| |
| err = pci_enable_device(pci); |
| if (err < 0) |
| return err; |
| |
| chip = kzalloc(sizeof(*chip), GFP_KERNEL); |
| if (!chip) { |
| snd_printk(KERN_ERR SFX "cannot allocate chip\n"); |
| pci_disable_device(pci); |
| return -ENOMEM; |
| } |
| |
| spin_lock_init(&chip->reg_lock); |
| mutex_init(&chip->open_mutex); |
| chip->card = card; |
| chip->pci = pci; |
| chip->irq = -1; |
| chip->driver_type = driver_type; |
| check_msi(chip); |
| chip->dev_index = dev; |
| INIT_WORK(&chip->irq_pending_work, azx_irq_pending_work); |
| |
| chip->position_fix = check_position_fix(chip, position_fix[dev]); |
| check_probe_mask(chip, dev); |
| |
| chip->single_cmd = single_cmd; |
| |
| if (bdl_pos_adj[dev] < 0) { |
| switch (chip->driver_type) { |
| case AZX_DRIVER_ICH: |
| bdl_pos_adj[dev] = 1; |
| break; |
| default: |
| bdl_pos_adj[dev] = 32; |
| break; |
| } |
| } |
| |
| #if BITS_PER_LONG != 64 |
| /* Fix up base address on ULI M5461 */ |
| if (chip->driver_type == AZX_DRIVER_ULI) { |
| u16 tmp3; |
| pci_read_config_word(pci, 0x40, &tmp3); |
| pci_write_config_word(pci, 0x40, tmp3 | 0x10); |
| pci_write_config_dword(pci, PCI_BASE_ADDRESS_1, 0); |
| } |
| #endif |
| |
| err = pci_request_regions(pci, "ICH HD audio"); |
| if (err < 0) { |
| kfree(chip); |
| pci_disable_device(pci); |
| return err; |
| } |
| |
| chip->addr = pci_resource_start(pci, 0); |
| chip->remap_addr = pci_ioremap_bar(pci, 0); |
| if (chip->remap_addr == NULL) { |
| snd_printk(KERN_ERR SFX "ioremap error\n"); |
| err = -ENXIO; |
| goto errout; |
| } |
| |
| if (chip->msi) |
| if (pci_enable_msi(pci) < 0) |
| chip->msi = 0; |
| |
| if (azx_acquire_irq(chip, 0) < 0) { |
| err = -EBUSY; |
| goto errout; |
| } |
| |
| pci_set_master(pci); |
| synchronize_irq(chip->irq); |
| |
| gcap = azx_readw(chip, GCAP); |
| snd_printdd(SFX "chipset global capabilities = 0x%x\n", gcap); |
| |
| /* disable SB600 64bit support for safety */ |
| if ((chip->driver_type == AZX_DRIVER_ATI) || |
| (chip->driver_type == AZX_DRIVER_ATIHDMI)) { |
| struct pci_dev *p_smbus; |
| p_smbus = pci_get_device(PCI_VENDOR_ID_ATI, |
| PCI_DEVICE_ID_ATI_SBX00_SMBUS, |
| NULL); |
| if (p_smbus) { |
| if (p_smbus->revision < 0x30) |
| gcap &= ~ICH6_GCAP_64OK; |
| pci_dev_put(p_smbus); |
| } |
| } |
| |
| /* allow 64bit DMA address if supported by H/W */ |
| if ((gcap & ICH6_GCAP_64OK) && !pci_set_dma_mask(pci, DMA_BIT_MASK(64))) |
| pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(64)); |
| else { |
| pci_set_dma_mask(pci, DMA_BIT_MASK(32)); |
| pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(32)); |
| } |
| |
| /* read number of streams from GCAP register instead of using |
| * hardcoded value |
| */ |
| chip->capture_streams = (gcap >> 8) & 0x0f; |
| chip->playback_streams = (gcap >> 12) & 0x0f; |
| if (!chip->playback_streams && !chip->capture_streams) { |
| /* gcap didn't give any info, switching to old method */ |
| |
| switch (chip->driver_type) { |
| case AZX_DRIVER_ULI: |
| chip->playback_streams = ULI_NUM_PLAYBACK; |
| chip->capture_streams = ULI_NUM_CAPTURE; |
| break; |
| case AZX_DRIVER_ATIHDMI: |
| chip->playback_streams = ATIHDMI_NUM_PLAYBACK; |
| chip->capture_streams = ATIHDMI_NUM_CAPTURE; |
| break; |
| case AZX_DRIVER_GENERIC: |
| default: |
| chip->playback_streams = ICH6_NUM_PLAYBACK; |
| chip->capture_streams = ICH6_NUM_CAPTURE; |
| break; |
| } |
| } |
| chip->capture_index_offset = 0; |
| chip->playback_index_offset = chip->capture_streams; |
| chip->num_streams = chip->playback_streams + chip->capture_streams; |
| chip->azx_dev = kcalloc(chip->num_streams, sizeof(*chip->azx_dev), |
| GFP_KERNEL); |
| if (!chip->azx_dev) { |
| snd_printk(KERN_ERR SFX "cannot malloc azx_dev\n"); |
| goto errout; |
| } |
| |
| for (i = 0; i < chip->num_streams; i++) { |
| /* allocate memory for the BDL for each stream */ |
| err = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, |
| snd_dma_pci_data(chip->pci), |
| BDL_SIZE, &chip->azx_dev[i].bdl); |
| if (err < 0) { |
| snd_printk(KERN_ERR SFX "cannot allocate BDL\n"); |
| goto errout; |
| } |
| } |
| /* allocate memory for the position buffer */ |
| err = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, |
| snd_dma_pci_data(chip->pci), |
| chip->num_streams * 8, &chip->posbuf); |
| if (err < 0) { |
| snd_printk(KERN_ERR SFX "cannot allocate posbuf\n"); |
| goto errout; |
| } |
| /* allocate CORB/RIRB */ |
| err = azx_alloc_cmd_io(chip); |
| if (err < 0) |
| goto errout; |
| |
| /* initialize streams */ |
| azx_init_stream(chip); |
| |
| /* initialize chip */ |
| azx_init_pci(chip); |
| azx_init_chip(chip); |
| |
| /* codec detection */ |
| if (!chip->codec_mask) { |
| snd_printk(KERN_ERR SFX "no codecs found!\n"); |
| err = -ENODEV; |
| goto errout; |
| } |
| |
| err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops); |
| if (err <0) { |
| snd_printk(KERN_ERR SFX "Error creating device [card]!\n"); |
| goto errout; |
| } |
| |
| strcpy(card->driver, "HDA-Intel"); |
| strlcpy(card->shortname, driver_short_names[chip->driver_type], |
| sizeof(card->shortname)); |
| snprintf(card->longname, sizeof(card->longname), |
| "%s at 0x%lx irq %i", |
| card->shortname, chip->addr, chip->irq); |
| |
| *rchip = chip; |
| return 0; |
| |
| errout: |
| azx_free(chip); |
| return err; |
| } |
| |
| static void power_down_all_codecs(struct azx *chip) |
| { |
| #ifdef CONFIG_SND_HDA_POWER_SAVE |
| /* The codecs were powered up in snd_hda_codec_new(). |
| * Now all initialization done, so turn them down if possible |
| */ |
| struct hda_codec *codec; |
| list_for_each_entry(codec, &chip->bus->codec_list, list) { |
| snd_hda_power_down(codec); |
| } |
| #endif |
| } |
| |
| static int __devinit azx_probe(struct pci_dev *pci, |
| const struct pci_device_id *pci_id) |
| { |
| static int dev; |
| struct snd_card *card; |
| struct azx *chip; |
| int err; |
| |
| if (dev >= SNDRV_CARDS) |
| return -ENODEV; |
| if (!enable[dev]) { |
| dev++; |
| return -ENOENT; |
| } |
| |
| err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card); |
| if (err < 0) { |
| snd_printk(KERN_ERR SFX "Error creating card!\n"); |
| return err; |
| } |
| |
| /* set this here since it's referred in snd_hda_load_patch() */ |
| snd_card_set_dev(card, &pci->dev); |
| |
| err = azx_create(card, pci, dev, pci_id->driver_data, &chip); |
| if (err < 0) |
| goto out_free; |
| card->private_data = chip; |
| |
| /* create codec instances */ |
| err = azx_codec_create(chip, model[dev]); |
| if (err < 0) |
| goto out_free; |
| #ifdef CONFIG_SND_HDA_PATCH_LOADER |
| if (patch[dev]) { |
| snd_printk(KERN_ERR SFX "Applying patch firmware '%s'\n", |
| patch[dev]); |
| err = snd_hda_load_patch(chip->bus, patch[dev]); |
| if (err < 0) |
| goto out_free; |
| } |
| #endif |
| if (!probe_only[dev]) { |
| err = azx_codec_configure(chip); |
| if (err < 0) |
| goto out_free; |
| } |
| |
| /* create PCM streams */ |
| err = snd_hda_build_pcms(chip->bus); |
| if (err < 0) |
| goto out_free; |
| |
| /* create mixer controls */ |
| err = azx_mixer_create(chip); |
| if (err < 0) |
| goto out_free; |
| |
| err = snd_card_register(card); |
| if (err < 0) |
| goto out_free; |
| |
| pci_set_drvdata(pci, card); |
| chip->running = 1; |
| power_down_all_codecs(chip); |
| azx_notifier_register(chip); |
| |
| dev++; |
| return err; |
| out_free: |
| snd_card_free(card); |
| return err; |
| } |
| |
| static void __devexit azx_remove(struct pci_dev *pci) |
| { |
| snd_card_free(pci_get_drvdata(pci)); |
| pci_set_drvdata(pci, NULL); |
| } |
| |
| /* PCI IDs */ |
| static struct pci_device_id azx_ids[] = { |
| /* ICH 6..10 */ |
| { PCI_DEVICE(0x8086, 0x2668), .driver_data = AZX_DRIVER_ICH }, |
| { PCI_DEVICE(0x8086, 0x27d8), .driver_data = AZX_DRIVER_ICH }, |
| { PCI_DEVICE(0x8086, 0x269a), .driver_data = AZX_DRIVER_ICH }, |
| { PCI_DEVICE(0x8086, 0x284b), .driver_data = AZX_DRIVER_ICH }, |
| { PCI_DEVICE(0x8086, 0x2911), .driver_data = AZX_DRIVER_ICH }, |
| { PCI_DEVICE(0x8086, 0x293e), .driver_data = AZX_DRIVER_ICH }, |
| { PCI_DEVICE(0x8086, 0x293f), .driver_data = AZX_DRIVER_ICH }, |
| { PCI_DEVICE(0x8086, 0x3a3e), .driver_data = AZX_DRIVER_ICH }, |
| { PCI_DEVICE(0x8086, 0x3a6e), .driver_data = AZX_DRIVER_ICH }, |
| /* PCH */ |
| { PCI_DEVICE(0x8086, 0x3b56), .driver_data = AZX_DRIVER_ICH }, |
| /* SCH */ |
| { PCI_DEVICE(0x8086, 0x811b), .driver_data = AZX_DRIVER_SCH }, |
| /* ATI SB 450/600 */ |
| { PCI_DEVICE(0x1002, 0x437b), .driver_data = AZX_DRIVER_ATI }, |
| { PCI_DEVICE(0x1002, 0x4383), .driver_data = AZX_DRIVER_ATI }, |
| /* ATI HDMI */ |
| { PCI_DEVICE(0x1002, 0x793b), .driver_data = AZX_DRIVER_ATIHDMI }, |
| { PCI_DEVICE(0x1002, 0x7919), .driver_data = AZX_DRIVER_ATIHDMI }, |
| { PCI_DEVICE(0x1002, 0x960f), .driver_data = AZX_DRIVER_ATIHDMI }, |
| { PCI_DEVICE(0x1002, 0x970f), .driver_data = AZX_DRIVER_ATIHDMI }, |
| { PCI_DEVICE(0x1002, 0xaa00), .driver_data = AZX_DRIVER_ATIHDMI }, |
| { PCI_DEVICE(0x1002, 0xaa08), .driver_data = AZX_DRIVER_ATIHDMI }, |
| { PCI_DEVICE(0x1002, 0xaa10), .driver_data = AZX_DRIVER_ATIHDMI }, |
| { PCI_DEVICE(0x1002, 0xaa18), .driver_data = AZX_DRIVER_ATIHDMI }, |
| { PCI_DEVICE(0x1002, 0xaa20), .driver_data = AZX_DRIVER_ATIHDMI }, |
| { PCI_DEVICE(0x1002, 0xaa28), .driver_data = AZX_DRIVER_ATIHDMI }, |
| { PCI_DEVICE(0x1002, 0xaa30), .driver_data = AZX_DRIVER_ATIHDMI }, |
| { PCI_DEVICE(0x1002, 0xaa38), .driver_data = AZX_DRIVER_ATIHDMI }, |
| { PCI_DEVICE(0x1002, 0xaa40), .driver_data = AZX_DRIVER_ATIHDMI }, |
| { PCI_DEVICE(0x1002, 0xaa48), .driver_data = AZX_DRIVER_ATIHDMI }, |
| /* VIA VT8251/VT8237A */ |
| { PCI_DEVICE(0x1106, 0x3288), .driver_data = AZX_DRIVER_VIA }, |
| /* SIS966 */ |
| { PCI_DEVICE(0x1039, 0x7502), .driver_data = AZX_DRIVER_SIS }, |
| /* ULI M5461 */ |
| { PCI_DEVICE(0x10b9, 0x5461), .driver_data = AZX_DRIVER_ULI }, |
| /* NVIDIA MCP */ |
| { PCI_DEVICE(0x10de, 0x026c), .driver_data = AZX_DRIVER_NVIDIA }, |
| { PCI_DEVICE(0x10de, 0x0371), .driver_data = AZX_DRIVER_NVIDIA }, |
| { PCI_DEVICE(0x10de, 0x03e4), .driver_data = AZX_DRIVER_NVIDIA }, |
| { PCI_DEVICE(0x10de, 0x03f0), .driver_data = AZX_DRIVER_NVIDIA }, |
| { PCI_DEVICE(0x10de, 0x044a), .driver_data = AZX_DRIVER_NVIDIA }, |
| { PCI_DEVICE(0x10de, 0x044b), .driver_data = AZX_DRIVER_NVIDIA }, |
| { PCI_DEVICE(0x10de, 0x055c), .driver_data = AZX_DRIVER_NVIDIA }, |
| { PCI_DEVICE(0x10de, 0x055d), .driver_data = AZX_DRIVER_NVIDIA }, |
| { PCI_DEVICE(0x10de, 0x0774), .driver_data = AZX_DRIVER_NVIDIA }, |
| { PCI_DEVICE(0x10de, 0x0775), .driver_data = AZX_DRIVER_NVIDIA }, |
| { PCI_DEVICE(0x10de, 0x0776), .driver_data = AZX_DRIVER_NVIDIA }, |
| { PCI_DEVICE(0x10de, 0x0777), .driver_data = AZX_DRIVER_NVIDIA }, |
| { PCI_DEVICE(0x10de, 0x07fc), .driver_data = AZX_DRIVER_NVIDIA }, |
| { PCI_DEVICE(0x10de, 0x07fd), .driver_data = AZX_DRIVER_NVIDIA }, |
| { PCI_DEVICE(0x10de, 0x0ac0), .driver_data = AZX_DRIVER_NVIDIA }, |
| { PCI_DEVICE(0x10de, 0x0ac1), .driver_data = AZX_DRIVER_NVIDIA }, |
| { PCI_DEVICE(0x10de, 0x0ac2), .driver_data = AZX_DRIVER_NVIDIA }, |
| { PCI_DEVICE(0x10de, 0x0ac3), .driver_data = AZX_DRIVER_NVIDIA }, |
| { PCI_DEVICE(0x10de, 0x0d94), .driver_data = AZX_DRIVER_NVIDIA }, |
| { PCI_DEVICE(0x10de, 0x0d95), .driver_data = AZX_DRIVER_NVIDIA }, |
| { PCI_DEVICE(0x10de, 0x0d96), .driver_data = AZX_DRIVER_NVIDIA }, |
| { PCI_DEVICE(0x10de, 0x0d97), .driver_data = AZX_DRIVER_NVIDIA }, |
| /* Teradici */ |
| { PCI_DEVICE(0x6549, 0x1200), .driver_data = AZX_DRIVER_TERA }, |
| /* Creative X-Fi (CA0110-IBG) */ |
| #if !defined(CONFIG_SND_CTXFI) && !defined(CONFIG_SND_CTXFI_MODULE) |
| /* the following entry conflicts with snd-ctxfi driver, |
| * as ctxfi driver mutates from HD-audio to native mode with |
| * a special command sequence. |
| */ |
| { PCI_DEVICE(PCI_VENDOR_ID_CREATIVE, PCI_ANY_ID), |
| .class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8, |
| .class_mask = 0xffffff, |
| .driver_data = AZX_DRIVER_GENERIC }, |
| #else |
| /* this entry seems still valid -- i.e. without emu20kx chip */ |
| { PCI_DEVICE(0x1102, 0x0009), .driver_data = AZX_DRIVER_GENERIC }, |
| #endif |
| /* AMD/ATI Generic, PCI class code and Vendor ID for HD Audio */ |
| { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_ANY_ID), |
| .class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8, |
| .class_mask = 0xffffff, |
| .driver_data = AZX_DRIVER_GENERIC }, |
| { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_ANY_ID), |
| .class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8, |
| .class_mask = 0xffffff, |
| .driver_data = AZX_DRIVER_GENERIC }, |
| { 0, } |
| }; |
| MODULE_DEVICE_TABLE(pci, azx_ids); |
| |
| /* pci_driver definition */ |
| static struct pci_driver driver = { |
| .name = "HDA Intel", |
| .id_table = azx_ids, |
| .probe = azx_probe, |
| .remove = __devexit_p(azx_remove), |
| #ifdef CONFIG_PM |
| .suspend = azx_suspend, |
| .resume = azx_resume, |
| #endif |
| }; |
| |
| static int __init alsa_card_azx_init(void) |
| { |
| return pci_register_driver(&driver); |
| } |
| |
| static void __exit alsa_card_azx_exit(void) |
| { |
| pci_unregister_driver(&driver); |
| } |
| |
| module_init(alsa_card_azx_init) |
| module_exit(alsa_card_azx_exit) |