Merge branch 'fixes' into misc
diff --git a/Documentation/ABI/testing/sysfs-class-mtd b/Documentation/ABI/testing/sysfs-class-mtd
index 3b5c3bc..f34e5923 100644
--- a/Documentation/ABI/testing/sysfs-class-mtd
+++ b/Documentation/ABI/testing/sysfs-class-mtd
@@ -229,6 +229,6 @@
Contact: linux-mtd@lists.infradead.org
Description:
For a partition, the offset of that partition from the start
- of the master device in bytes. This attribute is absent on
- main devices, so it can be used to distinguish between
- partitions and devices that aren't partitions.
+ of the parent (another partition or a flash device) in bytes.
+ This attribute is absent on flash devices, so it can be used
+ to distinguish them from partitions.
diff --git a/Documentation/DMA-API-HOWTO.txt b/Documentation/DMA-API-HOWTO.txt
index 4ed3883..f0cc3f7 100644
--- a/Documentation/DMA-API-HOWTO.txt
+++ b/Documentation/DMA-API-HOWTO.txt
@@ -1,22 +1,24 @@
- Dynamic DMA mapping Guide
- =========================
+=========================
+Dynamic DMA mapping Guide
+=========================
- David S. Miller <davem@redhat.com>
- Richard Henderson <rth@cygnus.com>
- Jakub Jelinek <jakub@redhat.com>
+:Author: David S. Miller <davem@redhat.com>
+:Author: Richard Henderson <rth@cygnus.com>
+:Author: Jakub Jelinek <jakub@redhat.com>
This is a guide to device driver writers on how to use the DMA API
with example pseudo-code. For a concise description of the API, see
DMA-API.txt.
- CPU and DMA addresses
+CPU and DMA addresses
+=====================
There are several kinds of addresses involved in the DMA API, and it's
important to understand the differences.
The kernel normally uses virtual addresses. Any address returned by
kmalloc(), vmalloc(), and similar interfaces is a virtual address and can
-be stored in a "void *".
+be stored in a ``void *``.
The virtual memory system (TLB, page tables, etc.) translates virtual
addresses to CPU physical addresses, which are stored as "phys_addr_t" or
@@ -37,7 +39,7 @@
supports 64-bit addresses for main memory and PCI BARs, it may use an IOMMU
so devices only need to use 32-bit DMA addresses.
-Here's a picture and some examples:
+Here's a picture and some examples::
CPU CPU Bus
Virtual Physical Address
@@ -98,15 +100,16 @@
bus-specific DMA API, i.e., use the dma_map_*() interfaces rather than the
pci_map_*() interfaces.
-First of all, you should make sure
+First of all, you should make sure::
-#include <linux/dma-mapping.h>
+ #include <linux/dma-mapping.h>
is in your driver, which provides the definition of dma_addr_t. This type
can hold any valid DMA address for the platform and should be used
everywhere you hold a DMA address returned from the DMA mapping functions.
- What memory is DMA'able?
+What memory is DMA'able?
+========================
The first piece of information you must know is what kernel memory can
be used with the DMA mapping facilities. There has been an unwritten
@@ -143,7 +146,8 @@
networking subsystems make sure that the buffers they use are valid
for you to DMA from/to.
- DMA addressing limitations
+DMA addressing limitations
+==========================
Does your device have any DMA addressing limitations? For example, is
your device only capable of driving the low order 24-bits of address?
@@ -166,7 +170,7 @@
because this shows that you did think about these issues wrt. your
device.
-The query is performed via a call to dma_set_mask_and_coherent():
+The query is performed via a call to dma_set_mask_and_coherent()::
int dma_set_mask_and_coherent(struct device *dev, u64 mask);
@@ -175,12 +179,12 @@
queries can be used instead:
The query for streaming mappings is performed via a call to
- dma_set_mask():
+ dma_set_mask()::
int dma_set_mask(struct device *dev, u64 mask);
The query for consistent allocations is performed via a call
- to dma_set_coherent_mask():
+ to dma_set_coherent_mask()::
int dma_set_coherent_mask(struct device *dev, u64 mask);
@@ -209,7 +213,7 @@
even detected, you can ask them for the kernel messages to find out
exactly why.
-The standard 32-bit addressing device would do something like this:
+The standard 32-bit addressing device would do something like this::
if (dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32))) {
dev_warn(dev, "mydev: No suitable DMA available\n");
@@ -225,7 +229,7 @@
more efficient than DAC addressing.
Here is how you would handle a 64-bit capable device which can drive
-all 64-bits when accessing streaming DMA:
+all 64-bits when accessing streaming DMA::
int using_dac;
@@ -239,7 +243,7 @@
}
If a card is capable of using 64-bit consistent allocations as well,
-the case would look like this:
+the case would look like this::
int using_dac, consistent_using_dac;
@@ -260,7 +264,7 @@
dma_set_coherent_mask().
Finally, if your device can only drive the low 24-bits of
-address you might do something like:
+address you might do something like::
if (dma_set_mask(dev, DMA_BIT_MASK(24))) {
dev_warn(dev, "mydev: 24-bit DMA addressing not available\n");
@@ -280,7 +284,7 @@
is important that the last call to dma_set_mask() be for the
most specific mask.
-Here is pseudo-code showing how this might be done:
+Here is pseudo-code showing how this might be done::
#define PLAYBACK_ADDRESS_BITS DMA_BIT_MASK(32)
#define RECORD_ADDRESS_BITS DMA_BIT_MASK(24)
@@ -308,7 +312,8 @@
devices seems to be littered with ISA chips given a PCI front end,
and thus retaining the 16MB DMA addressing limitations of ISA.
- Types of DMA mappings
+Types of DMA mappings
+=====================
There are two types of DMA mappings:
@@ -336,12 +341,14 @@
to memory is immediately visible to the device, and vice
versa. Consistent mappings guarantee this.
- IMPORTANT: Consistent DMA memory does not preclude the usage of
- proper memory barriers. The CPU may reorder stores to
+ .. important::
+
+ Consistent DMA memory does not preclude the usage of
+ proper memory barriers. The CPU may reorder stores to
consistent memory just as it may normal memory. Example:
if it is important for the device to see the first word
of a descriptor updated before the second, you must do
- something like:
+ something like::
desc->word0 = address;
wmb();
@@ -377,16 +384,17 @@
when the underlying buffers don't share cache lines with other data.
- Using Consistent DMA mappings.
+Using Consistent DMA mappings
+=============================
To allocate and map large (PAGE_SIZE or so) consistent DMA regions,
-you should do:
+you should do::
dma_addr_t dma_handle;
cpu_addr = dma_alloc_coherent(dev, size, &dma_handle, gfp);
-where device is a struct device *. This may be called in interrupt
+where device is a ``struct device *``. This may be called in interrupt
context with the GFP_ATOMIC flag.
Size is the length of the region you want to allocate, in bytes.
@@ -415,7 +423,7 @@
which is smaller than or equal to 64 kilobytes, the extent of the
buffer you receive will not cross a 64K boundary.
-To unmap and free such a DMA region, you call:
+To unmap and free such a DMA region, you call::
dma_free_coherent(dev, size, cpu_addr, dma_handle);
@@ -430,7 +438,7 @@
Also, it understands common hardware constraints for alignment,
like queue heads needing to be aligned on N byte boundaries.
-Create a dma_pool like this:
+Create a dma_pool like this::
struct dma_pool *pool;
@@ -444,7 +452,7 @@
must not cross 4KByte boundaries (but at that time it may be better to
use dma_alloc_coherent() directly instead).
-Allocate memory from a DMA pool like this:
+Allocate memory from a DMA pool like this::
cpu_addr = dma_pool_alloc(pool, flags, &dma_handle);
@@ -452,7 +460,7 @@
holding SMP locks), GFP_ATOMIC otherwise. Like dma_alloc_coherent(),
this returns two values, cpu_addr and dma_handle.
-Free memory that was allocated from a dma_pool like this:
+Free memory that was allocated from a dma_pool like this::
dma_pool_free(pool, cpu_addr, dma_handle);
@@ -460,7 +468,7 @@
dma_handle are the values dma_pool_alloc() returned. This function
may be called in interrupt context.
-Destroy a dma_pool by calling:
+Destroy a dma_pool by calling::
dma_pool_destroy(pool);
@@ -468,11 +476,12 @@
from a pool before you destroy the pool. This function may not
be called in interrupt context.
- DMA Direction
+DMA Direction
+=============
The interfaces described in subsequent portions of this document
take a DMA direction argument, which is an integer and takes on
-one of the following values:
+one of the following values::
DMA_BIDIRECTIONAL
DMA_TO_DEVICE
@@ -521,14 +530,15 @@
specifier. For receive packets, just the opposite, map/unmap them
with the DMA_FROM_DEVICE direction specifier.
- Using Streaming DMA mappings
+Using Streaming DMA mappings
+============================
The streaming DMA mapping routines can be called from interrupt
context. There are two versions of each map/unmap, one which will
map/unmap a single memory region, and one which will map/unmap a
scatterlist.
-To map a single region, you do:
+To map a single region, you do::
struct device *dev = &my_dev->dev;
dma_addr_t dma_handle;
@@ -545,7 +555,7 @@
goto map_error_handling;
}
-and to unmap it:
+and to unmap it::
dma_unmap_single(dev, dma_handle, size, direction);
@@ -563,7 +573,7 @@
you cannot reference HIGHMEM memory in this way. Thus, there is a
map/unmap interface pair akin to dma_{map,unmap}_single(). These
interfaces deal with page/offset pairs instead of CPU pointers.
-Specifically:
+Specifically::
struct device *dev = &my_dev->dev;
dma_addr_t dma_handle;
@@ -593,7 +603,7 @@
You should call dma_unmap_page() when the DMA activity is finished, e.g.,
from the interrupt which told you that the DMA transfer is done.
-With scatterlists, you map a region gathered from several regions by:
+With scatterlists, you map a region gathered from several regions by::
int i, count = dma_map_sg(dev, sglist, nents, direction);
struct scatterlist *sg;
@@ -617,16 +627,18 @@
and use sg_dma_address() and sg_dma_len() macros where you previously
accessed sg->address and sg->length as shown above.
-To unmap a scatterlist, just call:
+To unmap a scatterlist, just call::
dma_unmap_sg(dev, sglist, nents, direction);
Again, make sure DMA activity has already finished.
-PLEASE NOTE: The 'nents' argument to the dma_unmap_sg call must be
- the _same_ one you passed into the dma_map_sg call,
- it should _NOT_ be the 'count' value _returned_ from the
- dma_map_sg call.
+.. note::
+
+ The 'nents' argument to the dma_unmap_sg call must be
+ the _same_ one you passed into the dma_map_sg call,
+ it should _NOT_ be the 'count' value _returned_ from the
+ dma_map_sg call.
Every dma_map_{single,sg}() call should have its dma_unmap_{single,sg}()
counterpart, because the DMA address space is a shared resource and
@@ -638,11 +650,11 @@
correct copy of the DMA buffer.
So, firstly, just map it with dma_map_{single,sg}(), and after each DMA
-transfer call either:
+transfer call either::
dma_sync_single_for_cpu(dev, dma_handle, size, direction);
-or:
+or::
dma_sync_sg_for_cpu(dev, sglist, nents, direction);
@@ -650,17 +662,19 @@
Then, if you wish to let the device get at the DMA area again,
finish accessing the data with the CPU, and then before actually
-giving the buffer to the hardware call either:
+giving the buffer to the hardware call either::
dma_sync_single_for_device(dev, dma_handle, size, direction);
-or:
+or::
dma_sync_sg_for_device(dev, sglist, nents, direction);
as appropriate.
-PLEASE NOTE: The 'nents' argument to dma_sync_sg_for_cpu() and
+.. note::
+
+ The 'nents' argument to dma_sync_sg_for_cpu() and
dma_sync_sg_for_device() must be the same passed to
dma_map_sg(). It is _NOT_ the count returned by
dma_map_sg().
@@ -671,7 +685,7 @@
dma_sync_*() routines at all.
Here is pseudo code which shows a situation in which you would need
-to use the dma_sync_*() interfaces.
+to use the dma_sync_*() interfaces::
my_card_setup_receive_buffer(struct my_card *cp, char *buffer, int len)
{
@@ -747,7 +761,8 @@
they are entirely deprecated. Some ports already do not provide these
as it is impossible to correctly support them.
- Handling Errors
+Handling Errors
+===============
DMA address space is limited on some architectures and an allocation
failure can be determined by:
@@ -755,7 +770,7 @@
- checking if dma_alloc_coherent() returns NULL or dma_map_sg returns 0
- checking the dma_addr_t returned from dma_map_single() and dma_map_page()
- by using dma_mapping_error():
+ by using dma_mapping_error()::
dma_addr_t dma_handle;
@@ -773,7 +788,8 @@
of a multiple page mapping attempt. These example are applicable to
dma_map_page() as well.
-Example 1:
+Example 1::
+
dma_addr_t dma_handle1;
dma_addr_t dma_handle2;
@@ -802,8 +818,12 @@
dma_unmap_single(dma_handle1);
map_error_handling1:
-Example 2: (if buffers are allocated in a loop, unmap all mapped buffers when
- mapping error is detected in the middle)
+Example 2::
+
+ /*
+ * if buffers are allocated in a loop, unmap all mapped buffers when
+ * mapping error is detected in the middle
+ */
dma_addr_t dma_addr;
dma_addr_t array[DMA_BUFFERS];
@@ -846,7 +866,8 @@
fails in the queuecommand hook. This means that the SCSI subsystem
passes the command to the driver again later.
- Optimizing Unmap State Space Consumption
+Optimizing Unmap State Space Consumption
+========================================
On many platforms, dma_unmap_{single,page}() is simply a nop.
Therefore, keeping track of the mapping address and length is a waste
@@ -858,7 +879,7 @@
transform some example code.
1) Use DEFINE_DMA_UNMAP_{ADDR,LEN} in state saving structures.
- Example, before:
+ Example, before::
struct ring_state {
struct sk_buff *skb;
@@ -866,7 +887,7 @@
__u32 len;
};
- after:
+ after::
struct ring_state {
struct sk_buff *skb;
@@ -875,23 +896,23 @@
};
2) Use dma_unmap_{addr,len}_set() to set these values.
- Example, before:
+ Example, before::
ringp->mapping = FOO;
ringp->len = BAR;
- after:
+ after::
dma_unmap_addr_set(ringp, mapping, FOO);
dma_unmap_len_set(ringp, len, BAR);
3) Use dma_unmap_{addr,len}() to access these values.
- Example, before:
+ Example, before::
dma_unmap_single(dev, ringp->mapping, ringp->len,
DMA_FROM_DEVICE);
- after:
+ after::
dma_unmap_single(dev,
dma_unmap_addr(ringp, mapping),
@@ -902,7 +923,8 @@
separately, because it is possible for an implementation to only
need the address in order to perform the unmap operation.
- Platform Issues
+Platform Issues
+===============
If you are just writing drivers for Linux and do not maintain
an architecture port for the kernel, you can safely skip down
@@ -928,12 +950,13 @@
alignment constraints (e.g. the alignment constraints about 64-bit
objects).
- Closing
+Closing
+=======
This document, and the API itself, would not be in its current
form without the feedback and suggestions from numerous individuals.
We would like to specifically mention, in no particular order, the
-following people:
+following people::
Russell King <rmk@arm.linux.org.uk>
Leo Dagum <dagum@barrel.engr.sgi.com>
diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt
index 71200df..45b2932 100644
--- a/Documentation/DMA-API.txt
+++ b/Documentation/DMA-API.txt
@@ -1,7 +1,8 @@
- Dynamic DMA mapping using the generic device
- ============================================
+============================================
+Dynamic DMA mapping using the generic device
+============================================
- James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
+:Author: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
This document describes the DMA API. For a more gentle introduction
of the API (and actual examples), see Documentation/DMA-API-HOWTO.txt.
@@ -12,10 +13,10 @@
non-consistent platforms (this is usually only legacy platforms) you
should only use the API described in part I.
-Part I - dma_ API
--------------------------------------
+Part I - dma_API
+----------------
-To get the dma_ API, you must #include <linux/dma-mapping.h>. This
+To get the dma_API, you must #include <linux/dma-mapping.h>. This
provides dma_addr_t and the interfaces described below.
A dma_addr_t can hold any valid DMA address for the platform. It can be
@@ -26,9 +27,11 @@
Part Ia - Using large DMA-coherent buffers
------------------------------------------
-void *
-dma_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t *dma_handle, gfp_t flag)
+::
+
+ void *
+ dma_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, gfp_t flag)
Consistent memory is memory for which a write by either the device or
the processor can immediately be read by the processor or device
@@ -51,20 +54,24 @@
The simplest way to do that is to use the dma_pool calls (see below).
The flag parameter (dma_alloc_coherent() only) allows the caller to
-specify the GFP_ flags (see kmalloc()) for the allocation (the
+specify the ``GFP_`` flags (see kmalloc()) for the allocation (the
implementation may choose to ignore flags that affect the location of
the returned memory, like GFP_DMA).
-void *
-dma_zalloc_coherent(struct device *dev, size_t size,
- dma_addr_t *dma_handle, gfp_t flag)
+::
+
+ void *
+ dma_zalloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, gfp_t flag)
Wraps dma_alloc_coherent() and also zeroes the returned memory if the
allocation attempt succeeded.
-void
-dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
- dma_addr_t dma_handle)
+::
+
+ void
+ dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
+ dma_addr_t dma_handle)
Free a region of consistent memory you previously allocated. dev,
size and dma_handle must all be the same as those passed into
@@ -78,7 +85,7 @@
Part Ib - Using small DMA-coherent buffers
------------------------------------------
-To get this part of the dma_ API, you must #include <linux/dmapool.h>
+To get this part of the dma_API, you must #include <linux/dmapool.h>
Many drivers need lots of small DMA-coherent memory regions for DMA
descriptors or I/O buffers. Rather than allocating in units of a page
@@ -88,6 +95,8 @@
for alignment, like queue heads needing to be aligned on N-byte boundaries.
+::
+
struct dma_pool *
dma_pool_create(const char *name, struct device *dev,
size_t size, size_t align, size_t alloc);
@@ -103,16 +112,21 @@
crossing restrictions, pass 0 for alloc; passing 4096 says memory allocated
from this pool must not cross 4KByte boundaries.
+::
- void *dma_pool_zalloc(struct dma_pool *pool, gfp_t mem_flags,
- dma_addr_t *handle)
+ void *
+ dma_pool_zalloc(struct dma_pool *pool, gfp_t mem_flags,
+ dma_addr_t *handle)
Wraps dma_pool_alloc() and also zeroes the returned memory if the
allocation attempt succeeded.
- void *dma_pool_alloc(struct dma_pool *pool, gfp_t gfp_flags,
- dma_addr_t *dma_handle);
+::
+
+ void *
+ dma_pool_alloc(struct dma_pool *pool, gfp_t gfp_flags,
+ dma_addr_t *dma_handle);
This allocates memory from the pool; the returned memory will meet the
size and alignment requirements specified at creation time. Pass
@@ -122,16 +136,20 @@
address usable by the CPU, and the DMA address usable by the pool's
device.
+::
- void dma_pool_free(struct dma_pool *pool, void *vaddr,
- dma_addr_t addr);
+ void
+ dma_pool_free(struct dma_pool *pool, void *vaddr,
+ dma_addr_t addr);
This puts memory back into the pool. The pool is what was passed to
dma_pool_alloc(); the CPU (vaddr) and DMA addresses are what
were returned when that routine allocated the memory being freed.
+::
- void dma_pool_destroy(struct dma_pool *pool);
+ void
+ dma_pool_destroy(struct dma_pool *pool);
dma_pool_destroy() frees the resources of the pool. It must be
called in a context which can sleep. Make sure you've freed all allocated
@@ -141,32 +159,40 @@
Part Ic - DMA addressing limitations
------------------------------------
-int
-dma_set_mask_and_coherent(struct device *dev, u64 mask)
+::
+
+ int
+ dma_set_mask_and_coherent(struct device *dev, u64 mask)
Checks to see if the mask is possible and updates the device
streaming and coherent DMA mask parameters if it is.
Returns: 0 if successful and a negative error if not.
-int
-dma_set_mask(struct device *dev, u64 mask)
+::
+
+ int
+ dma_set_mask(struct device *dev, u64 mask)
Checks to see if the mask is possible and updates the device
parameters if it is.
Returns: 0 if successful and a negative error if not.
-int
-dma_set_coherent_mask(struct device *dev, u64 mask)
+::
+
+ int
+ dma_set_coherent_mask(struct device *dev, u64 mask)
Checks to see if the mask is possible and updates the device
parameters if it is.
Returns: 0 if successful and a negative error if not.
-u64
-dma_get_required_mask(struct device *dev)
+::
+
+ u64
+ dma_get_required_mask(struct device *dev)
This API returns the mask that the platform requires to
operate efficiently. Usually this means the returned mask
@@ -182,94 +208,107 @@
Part Id - Streaming DMA mappings
--------------------------------
-dma_addr_t
-dma_map_single(struct device *dev, void *cpu_addr, size_t size,
- enum dma_data_direction direction)
+::
+
+ dma_addr_t
+ dma_map_single(struct device *dev, void *cpu_addr, size_t size,
+ enum dma_data_direction direction)
Maps a piece of processor virtual memory so it can be accessed by the
device and returns the DMA address of the memory.
The direction for both APIs may be converted freely by casting.
-However the dma_ API uses a strongly typed enumerator for its
+However the dma_API uses a strongly typed enumerator for its
direction:
+======================= =============================================
DMA_NONE no direction (used for debugging)
DMA_TO_DEVICE data is going from the memory to the device
DMA_FROM_DEVICE data is coming from the device to the memory
DMA_BIDIRECTIONAL direction isn't known
+======================= =============================================
-Notes: Not all memory regions in a machine can be mapped by this API.
-Further, contiguous kernel virtual space may not be contiguous as
-physical memory. Since this API does not provide any scatter/gather
-capability, it will fail if the user tries to map a non-physically
-contiguous piece of memory. For this reason, memory to be mapped by
-this API should be obtained from sources which guarantee it to be
-physically contiguous (like kmalloc).
+.. note::
-Further, the DMA address of the memory must be within the
-dma_mask of the device (the dma_mask is a bit mask of the
-addressable region for the device, i.e., if the DMA address of
-the memory ANDed with the dma_mask is still equal to the DMA
-address, then the device can perform DMA to the memory). To
-ensure that the memory allocated by kmalloc is within the dma_mask,
-the driver may specify various platform-dependent flags to restrict
-the DMA address range of the allocation (e.g., on x86, GFP_DMA
-guarantees to be within the first 16MB of available DMA addresses,
-as required by ISA devices).
+ Not all memory regions in a machine can be mapped by this API.
+ Further, contiguous kernel virtual space may not be contiguous as
+ physical memory. Since this API does not provide any scatter/gather
+ capability, it will fail if the user tries to map a non-physically
+ contiguous piece of memory. For this reason, memory to be mapped by
+ this API should be obtained from sources which guarantee it to be
+ physically contiguous (like kmalloc).
-Note also that the above constraints on physical contiguity and
-dma_mask may not apply if the platform has an IOMMU (a device which
-maps an I/O DMA address to a physical memory address). However, to be
-portable, device driver writers may *not* assume that such an IOMMU
-exists.
+ Further, the DMA address of the memory must be within the
+ dma_mask of the device (the dma_mask is a bit mask of the
+ addressable region for the device, i.e., if the DMA address of
+ the memory ANDed with the dma_mask is still equal to the DMA
+ address, then the device can perform DMA to the memory). To
+ ensure that the memory allocated by kmalloc is within the dma_mask,
+ the driver may specify various platform-dependent flags to restrict
+ the DMA address range of the allocation (e.g., on x86, GFP_DMA
+ guarantees to be within the first 16MB of available DMA addresses,
+ as required by ISA devices).
-Warnings: Memory coherency operates at a granularity called the cache
-line width. In order for memory mapped by this API to operate
-correctly, the mapped region must begin exactly on a cache line
-boundary and end exactly on one (to prevent two separately mapped
-regions from sharing a single cache line). Since the cache line size
-may not be known at compile time, the API will not enforce this
-requirement. Therefore, it is recommended that driver writers who
-don't take special care to determine the cache line size at run time
-only map virtual regions that begin and end on page boundaries (which
-are guaranteed also to be cache line boundaries).
+ Note also that the above constraints on physical contiguity and
+ dma_mask may not apply if the platform has an IOMMU (a device which
+ maps an I/O DMA address to a physical memory address). However, to be
+ portable, device driver writers may *not* assume that such an IOMMU
+ exists.
-DMA_TO_DEVICE synchronisation must be done after the last modification
-of the memory region by the software and before it is handed off to
-the device. Once this primitive is used, memory covered by this
-primitive should be treated as read-only by the device. If the device
-may write to it at any point, it should be DMA_BIDIRECTIONAL (see
-below).
+.. warning::
-DMA_FROM_DEVICE synchronisation must be done before the driver
-accesses data that may be changed by the device. This memory should
-be treated as read-only by the driver. If the driver needs to write
-to it at any point, it should be DMA_BIDIRECTIONAL (see below).
+ Memory coherency operates at a granularity called the cache
+ line width. In order for memory mapped by this API to operate
+ correctly, the mapped region must begin exactly on a cache line
+ boundary and end exactly on one (to prevent two separately mapped
+ regions from sharing a single cache line). Since the cache line size
+ may not be known at compile time, the API will not enforce this
+ requirement. Therefore, it is recommended that driver writers who
+ don't take special care to determine the cache line size at run time
+ only map virtual regions that begin and end on page boundaries (which
+ are guaranteed also to be cache line boundaries).
-DMA_BIDIRECTIONAL requires special handling: it means that the driver
-isn't sure if the memory was modified before being handed off to the
-device and also isn't sure if the device will also modify it. Thus,
-you must always sync bidirectional memory twice: once before the
-memory is handed off to the device (to make sure all memory changes
-are flushed from the processor) and once before the data may be
-accessed after being used by the device (to make sure any processor
-cache lines are updated with data that the device may have changed).
+ DMA_TO_DEVICE synchronisation must be done after the last modification
+ of the memory region by the software and before it is handed off to
+ the device. Once this primitive is used, memory covered by this
+ primitive should be treated as read-only by the device. If the device
+ may write to it at any point, it should be DMA_BIDIRECTIONAL (see
+ below).
-void
-dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
- enum dma_data_direction direction)
+ DMA_FROM_DEVICE synchronisation must be done before the driver
+ accesses data that may be changed by the device. This memory should
+ be treated as read-only by the driver. If the driver needs to write
+ to it at any point, it should be DMA_BIDIRECTIONAL (see below).
+
+ DMA_BIDIRECTIONAL requires special handling: it means that the driver
+ isn't sure if the memory was modified before being handed off to the
+ device and also isn't sure if the device will also modify it. Thus,
+ you must always sync bidirectional memory twice: once before the
+ memory is handed off to the device (to make sure all memory changes
+ are flushed from the processor) and once before the data may be
+ accessed after being used by the device (to make sure any processor
+ cache lines are updated with data that the device may have changed).
+
+::
+
+ void
+ dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+ enum dma_data_direction direction)
Unmaps the region previously mapped. All the parameters passed in
must be identical to those passed in (and returned) by the mapping
API.
-dma_addr_t
-dma_map_page(struct device *dev, struct page *page,
- unsigned long offset, size_t size,
- enum dma_data_direction direction)
-void
-dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
- enum dma_data_direction direction)
+::
+
+ dma_addr_t
+ dma_map_page(struct device *dev, struct page *page,
+ unsigned long offset, size_t size,
+ enum dma_data_direction direction)
+
+ void
+ dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
+ enum dma_data_direction direction)
API for mapping and unmapping for pages. All the notes and warnings
for the other mapping APIs apply here. Also, although the <offset>
@@ -277,20 +316,24 @@
recommended that you never use these unless you really know what the
cache width is.
-dma_addr_t
-dma_map_resource(struct device *dev, phys_addr_t phys_addr, size_t size,
- enum dma_data_direction dir, unsigned long attrs)
+::
-void
-dma_unmap_resource(struct device *dev, dma_addr_t addr, size_t size,
- enum dma_data_direction dir, unsigned long attrs)
+ dma_addr_t
+ dma_map_resource(struct device *dev, phys_addr_t phys_addr, size_t size,
+ enum dma_data_direction dir, unsigned long attrs)
+
+ void
+ dma_unmap_resource(struct device *dev, dma_addr_t addr, size_t size,
+ enum dma_data_direction dir, unsigned long attrs)
API for mapping and unmapping for MMIO resources. All the notes and
warnings for the other mapping APIs apply here. The API should only be
used to map device MMIO resources, mapping of RAM is not permitted.
-int
-dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+::
+
+ int
+ dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
In some circumstances dma_map_single(), dma_map_page() and dma_map_resource()
will fail to create a mapping. A driver can check for these errors by testing
@@ -298,9 +341,11 @@
means the mapping could not be created and the driver should take appropriate
action (e.g. reduce current DMA mapping usage or delay and try again later).
+::
+
int
dma_map_sg(struct device *dev, struct scatterlist *sg,
- int nents, enum dma_data_direction direction)
+ int nents, enum dma_data_direction direction)
Returns: the number of DMA address segments mapped (this may be shorter
than <nents> passed in if some elements of the scatter/gather list are
@@ -316,7 +361,7 @@
aborting the request or even oopsing is better than doing nothing and
corrupting the filesystem.
-With scatterlists, you use the resulting mapping like this:
+With scatterlists, you use the resulting mapping like this::
int i, count = dma_map_sg(dev, sglist, nents, direction);
struct scatterlist *sg;
@@ -337,9 +382,11 @@
and use sg_dma_address() and sg_dma_len() macros where you previously
accessed sg->address and sg->length as shown above.
+::
+
void
dma_unmap_sg(struct device *dev, struct scatterlist *sg,
- int nents, enum dma_data_direction direction)
+ int nents, enum dma_data_direction direction)
Unmap the previously mapped scatter/gather list. All the parameters
must be the same as those and passed in to the scatter/gather mapping
@@ -348,18 +395,27 @@
Note: <nents> must be the number you passed in, *not* the number of
DMA address entries returned.
-void
-dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
- enum dma_data_direction direction)
-void
-dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size,
- enum dma_data_direction direction)
-void
-dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents,
- enum dma_data_direction direction)
-void
-dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nents,
- enum dma_data_direction direction)
+::
+
+ void
+ dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
+ size_t size,
+ enum dma_data_direction direction)
+
+ void
+ dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
+ size_t size,
+ enum dma_data_direction direction)
+
+ void
+ dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+ int nents,
+ enum dma_data_direction direction)
+
+ void
+ dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+ int nents,
+ enum dma_data_direction direction)
Synchronise a single contiguous or scatter/gather mapping for the CPU
and device. With the sync_sg API, all the parameters must be the same
@@ -367,36 +423,41 @@
you can use dma_handle and size parameters that aren't identical to
those passed into the single mapping API to do a partial sync.
-Notes: You must do this:
-- Before reading values that have been written by DMA from the device
- (use the DMA_FROM_DEVICE direction)
-- After writing values that will be written to the device using DMA
- (use the DMA_TO_DEVICE) direction
-- before *and* after handing memory to the device if the memory is
- DMA_BIDIRECTIONAL
+.. note::
+
+ You must do this:
+
+ - Before reading values that have been written by DMA from the device
+ (use the DMA_FROM_DEVICE direction)
+ - After writing values that will be written to the device using DMA
+ (use the DMA_TO_DEVICE) direction
+ - before *and* after handing memory to the device if the memory is
+ DMA_BIDIRECTIONAL
See also dma_map_single().
-dma_addr_t
-dma_map_single_attrs(struct device *dev, void *cpu_addr, size_t size,
- enum dma_data_direction dir,
- unsigned long attrs)
+::
-void
-dma_unmap_single_attrs(struct device *dev, dma_addr_t dma_addr,
- size_t size, enum dma_data_direction dir,
- unsigned long attrs)
+ dma_addr_t
+ dma_map_single_attrs(struct device *dev, void *cpu_addr, size_t size,
+ enum dma_data_direction dir,
+ unsigned long attrs)
-int
-dma_map_sg_attrs(struct device *dev, struct scatterlist *sgl,
- int nents, enum dma_data_direction dir,
- unsigned long attrs)
+ void
+ dma_unmap_single_attrs(struct device *dev, dma_addr_t dma_addr,
+ size_t size, enum dma_data_direction dir,
+ unsigned long attrs)
-void
-dma_unmap_sg_attrs(struct device *dev, struct scatterlist *sgl,
- int nents, enum dma_data_direction dir,
- unsigned long attrs)
+ int
+ dma_map_sg_attrs(struct device *dev, struct scatterlist *sgl,
+ int nents, enum dma_data_direction dir,
+ unsigned long attrs)
+
+ void
+ dma_unmap_sg_attrs(struct device *dev, struct scatterlist *sgl,
+ int nents, enum dma_data_direction dir,
+ unsigned long attrs)
The four functions above are just like the counterpart functions
without the _attrs suffixes, except that they pass an optional
@@ -410,37 +471,38 @@
without the _attrs suffix. As a result dma_map_single_attrs()
can generally replace dma_map_single(), etc.
-As an example of the use of the *_attrs functions, here's how
+As an example of the use of the ``*_attrs`` functions, here's how
you could pass an attribute DMA_ATTR_FOO when mapping memory
-for DMA:
+for DMA::
-#include <linux/dma-mapping.h>
-/* DMA_ATTR_FOO should be defined in linux/dma-mapping.h and
- * documented in Documentation/DMA-attributes.txt */
-...
+ #include <linux/dma-mapping.h>
+ /* DMA_ATTR_FOO should be defined in linux/dma-mapping.h and
+ * documented in Documentation/DMA-attributes.txt */
+ ...
- unsigned long attr;
- attr |= DMA_ATTR_FOO;
- ....
- n = dma_map_sg_attrs(dev, sg, nents, DMA_TO_DEVICE, attr);
- ....
+ unsigned long attr;
+ attr |= DMA_ATTR_FOO;
+ ....
+ n = dma_map_sg_attrs(dev, sg, nents, DMA_TO_DEVICE, attr);
+ ....
Architectures that care about DMA_ATTR_FOO would check for its
presence in their implementations of the mapping and unmapping
-routines, e.g.:
+routines, e.g.:::
-void whizco_dma_map_sg_attrs(struct device *dev, dma_addr_t dma_addr,
- size_t size, enum dma_data_direction dir,
- unsigned long attrs)
-{
- ....
- if (attrs & DMA_ATTR_FOO)
- /* twizzle the frobnozzle */
- ....
+ void whizco_dma_map_sg_attrs(struct device *dev, dma_addr_t dma_addr,
+ size_t size, enum dma_data_direction dir,
+ unsigned long attrs)
+ {
+ ....
+ if (attrs & DMA_ATTR_FOO)
+ /* twizzle the frobnozzle */
+ ....
+ }
-Part II - Advanced dma_ usage
------------------------------
+Part II - Advanced dma usage
+----------------------------
Warning: These pieces of the DMA API should not be used in the
majority of cases, since they cater for unlikely corner cases that
@@ -450,9 +512,11 @@
processor and an I/O device, you should not be using this part of the
API at all.
-void *
-dma_alloc_noncoherent(struct device *dev, size_t size,
- dma_addr_t *dma_handle, gfp_t flag)
+::
+
+ void *
+ dma_alloc_noncoherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, gfp_t flag)
Identical to dma_alloc_coherent() except that the platform will
choose to return either consistent or non-consistent memory as it sees
@@ -468,39 +532,49 @@
required to work on one of the rare (usually non-PCI) architectures
that simply cannot make consistent memory.
-void
-dma_free_noncoherent(struct device *dev, size_t size, void *cpu_addr,
- dma_addr_t dma_handle)
+::
+
+ void
+ dma_free_noncoherent(struct device *dev, size_t size, void *cpu_addr,
+ dma_addr_t dma_handle)
Free memory allocated by the nonconsistent API. All parameters must
be identical to those passed in (and returned by
dma_alloc_noncoherent()).
-int
-dma_get_cache_alignment(void)
+::
+
+ int
+ dma_get_cache_alignment(void)
Returns the processor cache alignment. This is the absolute minimum
alignment *and* width that you must observe when either mapping
memory or doing partial flushes.
-Notes: This API may return a number *larger* than the actual cache
-line, but it will guarantee that one or more cache lines fit exactly
-into the width returned by this call. It will also always be a power
-of two for easy alignment.
+.. note::
-void
-dma_cache_sync(struct device *dev, void *vaddr, size_t size,
- enum dma_data_direction direction)
+ This API may return a number *larger* than the actual cache
+ line, but it will guarantee that one or more cache lines fit exactly
+ into the width returned by this call. It will also always be a power
+ of two for easy alignment.
+
+::
+
+ void
+ dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+ enum dma_data_direction direction)
Do a partial sync of memory that was allocated by
dma_alloc_noncoherent(), starting at virtual address vaddr and
continuing on for size. Again, you *must* observe the cache line
boundaries when doing this.
-int
-dma_declare_coherent_memory(struct device *dev, phys_addr_t phys_addr,
- dma_addr_t device_addr, size_t size, int
- flags)
+::
+
+ int
+ dma_declare_coherent_memory(struct device *dev, phys_addr_t phys_addr,
+ dma_addr_t device_addr, size_t size, int
+ flags)
Declare region of memory to be handed out by dma_alloc_coherent() when
it's asked for coherent memory for this device.
@@ -516,21 +590,21 @@
flags can be ORed together and are:
-DMA_MEMORY_MAP - request that the memory returned from
-dma_alloc_coherent() be directly writable.
+- DMA_MEMORY_MAP - request that the memory returned from
+ dma_alloc_coherent() be directly writable.
-DMA_MEMORY_IO - request that the memory returned from
-dma_alloc_coherent() be addressable using read()/write()/memcpy_toio() etc.
+- DMA_MEMORY_IO - request that the memory returned from
+ dma_alloc_coherent() be addressable using read()/write()/memcpy_toio() etc.
One or both of these flags must be present.
-DMA_MEMORY_INCLUDES_CHILDREN - make the declared memory be allocated by
-dma_alloc_coherent of any child devices of this one (for memory residing
-on a bridge).
+- DMA_MEMORY_INCLUDES_CHILDREN - make the declared memory be allocated by
+ dma_alloc_coherent of any child devices of this one (for memory residing
+ on a bridge).
-DMA_MEMORY_EXCLUSIVE - only allocate memory from the declared regions.
-Do not allow dma_alloc_coherent() to fall back to system memory when
-it's out of memory in the declared region.
+- DMA_MEMORY_EXCLUSIVE - only allocate memory from the declared regions.
+ Do not allow dma_alloc_coherent() to fall back to system memory when
+ it's out of memory in the declared region.
The return value will be either DMA_MEMORY_MAP or DMA_MEMORY_IO and
must correspond to a passed in flag (i.e. no returning DMA_MEMORY_IO
@@ -543,15 +617,17 @@
isn't prepared to handle this contingency, it should not specify
DMA_MEMORY_IO in the input flags.
-As a simplification for the platforms, only *one* such region of
+As a simplification for the platforms, only **one** such region of
memory may be declared per device.
For reasons of efficiency, most platforms choose to track the declared
region only at the granularity of a page. For smaller allocations,
you should use the dma_pool() API.
-void
-dma_release_declared_memory(struct device *dev)
+::
+
+ void
+ dma_release_declared_memory(struct device *dev)
Remove the memory region previously declared from the system. This
API performs *no* in-use checking for this region and will return
@@ -559,9 +635,11 @@
driver's job to ensure that no parts of this memory region are
currently in use.
-void *
-dma_mark_declared_memory_occupied(struct device *dev,
- dma_addr_t device_addr, size_t size)
+::
+
+ void *
+ dma_mark_declared_memory_occupied(struct device *dev,
+ dma_addr_t device_addr, size_t size)
This is used to occupy specific regions of the declared space
(dma_alloc_coherent() will hand out the first free region it finds).
@@ -592,38 +670,37 @@
If you boot the resulting kernel will contain code which does some bookkeeping
about what DMA memory was allocated for which device. If this code detects an
error it prints a warning message with some details into your kernel log. An
-example warning message may look like this:
+example warning message may look like this::
-------------[ cut here ]------------
-WARNING: at /data2/repos/linux-2.6-iommu/lib/dma-debug.c:448
- check_unmap+0x203/0x490()
-Hardware name:
-forcedeth 0000:00:08.0: DMA-API: device driver frees DMA memory with wrong
- function [device address=0x00000000640444be] [size=66 bytes] [mapped as
-single] [unmapped as page]
-Modules linked in: nfsd exportfs bridge stp llc r8169
-Pid: 0, comm: swapper Tainted: G W 2.6.28-dmatest-09289-g8bb99c0 #1
-Call Trace:
- <IRQ> [<ffffffff80240b22>] warn_slowpath+0xf2/0x130
- [<ffffffff80647b70>] _spin_unlock+0x10/0x30
- [<ffffffff80537e75>] usb_hcd_link_urb_to_ep+0x75/0xc0
- [<ffffffff80647c22>] _spin_unlock_irqrestore+0x12/0x40
- [<ffffffff8055347f>] ohci_urb_enqueue+0x19f/0x7c0
- [<ffffffff80252f96>] queue_work+0x56/0x60
- [<ffffffff80237e10>] enqueue_task_fair+0x20/0x50
- [<ffffffff80539279>] usb_hcd_submit_urb+0x379/0xbc0
- [<ffffffff803b78c3>] cpumask_next_and+0x23/0x40
- [<ffffffff80235177>] find_busiest_group+0x207/0x8a0
- [<ffffffff8064784f>] _spin_lock_irqsave+0x1f/0x50
- [<ffffffff803c7ea3>] check_unmap+0x203/0x490
- [<ffffffff803c8259>] debug_dma_unmap_page+0x49/0x50
- [<ffffffff80485f26>] nv_tx_done_optimized+0xc6/0x2c0
- [<ffffffff80486c13>] nv_nic_irq_optimized+0x73/0x2b0
- [<ffffffff8026df84>] handle_IRQ_event+0x34/0x70
- [<ffffffff8026ffe9>] handle_edge_irq+0xc9/0x150
- [<ffffffff8020e3ab>] do_IRQ+0xcb/0x1c0
- [<ffffffff8020c093>] ret_from_intr+0x0/0xa
- <EOI> <4>---[ end trace f6435a98e2a38c0e ]---
+ WARNING: at /data2/repos/linux-2.6-iommu/lib/dma-debug.c:448
+ check_unmap+0x203/0x490()
+ Hardware name:
+ forcedeth 0000:00:08.0: DMA-API: device driver frees DMA memory with wrong
+ function [device address=0x00000000640444be] [size=66 bytes] [mapped as
+ single] [unmapped as page]
+ Modules linked in: nfsd exportfs bridge stp llc r8169
+ Pid: 0, comm: swapper Tainted: G W 2.6.28-dmatest-09289-g8bb99c0 #1
+ Call Trace:
+ <IRQ> [<ffffffff80240b22>] warn_slowpath+0xf2/0x130
+ [<ffffffff80647b70>] _spin_unlock+0x10/0x30
+ [<ffffffff80537e75>] usb_hcd_link_urb_to_ep+0x75/0xc0
+ [<ffffffff80647c22>] _spin_unlock_irqrestore+0x12/0x40
+ [<ffffffff8055347f>] ohci_urb_enqueue+0x19f/0x7c0
+ [<ffffffff80252f96>] queue_work+0x56/0x60
+ [<ffffffff80237e10>] enqueue_task_fair+0x20/0x50
+ [<ffffffff80539279>] usb_hcd_submit_urb+0x379/0xbc0
+ [<ffffffff803b78c3>] cpumask_next_and+0x23/0x40
+ [<ffffffff80235177>] find_busiest_group+0x207/0x8a0
+ [<ffffffff8064784f>] _spin_lock_irqsave+0x1f/0x50
+ [<ffffffff803c7ea3>] check_unmap+0x203/0x490
+ [<ffffffff803c8259>] debug_dma_unmap_page+0x49/0x50
+ [<ffffffff80485f26>] nv_tx_done_optimized+0xc6/0x2c0
+ [<ffffffff80486c13>] nv_nic_irq_optimized+0x73/0x2b0
+ [<ffffffff8026df84>] handle_IRQ_event+0x34/0x70
+ [<ffffffff8026ffe9>] handle_edge_irq+0xc9/0x150
+ [<ffffffff8020e3ab>] do_IRQ+0xcb/0x1c0
+ [<ffffffff8020c093>] ret_from_intr+0x0/0xa
+ <EOI> <4>---[ end trace f6435a98e2a38c0e ]---
The driver developer can find the driver and the device including a stacktrace
of the DMA-API call which caused this warning.
@@ -637,43 +714,42 @@
The debugfs directory for the DMA-API debugging code is called dma-api/. In
this directory the following files can currently be found:
- dma-api/all_errors This file contains a numeric value. If this
+=============================== ===============================================
+dma-api/all_errors This file contains a numeric value. If this
value is not equal to zero the debugging code
will print a warning for every error it finds
into the kernel log. Be careful with this
option, as it can easily flood your logs.
- dma-api/disabled This read-only file contains the character 'Y'
+dma-api/disabled This read-only file contains the character 'Y'
if the debugging code is disabled. This can
happen when it runs out of memory or if it was
disabled at boot time
- dma-api/error_count This file is read-only and shows the total
+dma-api/error_count This file is read-only and shows the total
numbers of errors found.
- dma-api/num_errors The number in this file shows how many
+dma-api/num_errors The number in this file shows how many
warnings will be printed to the kernel log
before it stops. This number is initialized to
one at system boot and be set by writing into
this file
- dma-api/min_free_entries
- This read-only file can be read to get the
+dma-api/min_free_entries This read-only file can be read to get the
minimum number of free dma_debug_entries the
allocator has ever seen. If this value goes
down to zero the code will disable itself
because it is not longer reliable.
- dma-api/num_free_entries
- The current number of free dma_debug_entries
+dma-api/num_free_entries The current number of free dma_debug_entries
in the allocator.
- dma-api/driver-filter
- You can write a name of a driver into this file
+dma-api/driver-filter You can write a name of a driver into this file
to limit the debug output to requests from that
particular driver. Write an empty string to
that file to disable the filter and see
all errors again.
+=============================== ===============================================
If you have this code compiled into your kernel it will be enabled by default.
If you want to boot without the bookkeeping anyway you can provide
@@ -692,7 +768,10 @@
boot with 'dma_debug_entries=<your_desired_number>' to overwrite the
architectural default.
-void debug_dma_mapping_error(struct device *dev, dma_addr_t dma_addr);
+::
+
+ void
+ debug_dma_mapping_error(struct device *dev, dma_addr_t dma_addr);
dma-debug interface debug_dma_mapping_error() to debug drivers that fail
to check DMA mapping errors on addresses returned by dma_map_single() and
@@ -702,4 +781,3 @@
this flag is still set, prints warning message that includes call trace that
leads up to the unmap. This interface can be called from dma_mapping_error()
routines to enable DMA mapping error check debugging.
-
diff --git a/Documentation/DMA-ISA-LPC.txt b/Documentation/DMA-ISA-LPC.txt
index c413313..8c2b8be 100644
--- a/Documentation/DMA-ISA-LPC.txt
+++ b/Documentation/DMA-ISA-LPC.txt
@@ -1,19 +1,20 @@
- DMA with ISA and LPC devices
- ============================
+============================
+DMA with ISA and LPC devices
+============================
- Pierre Ossman <drzeus@drzeus.cx>
+:Author: Pierre Ossman <drzeus@drzeus.cx>
This document describes how to do DMA transfers using the old ISA DMA
controller. Even though ISA is more or less dead today the LPC bus
uses the same DMA system so it will be around for quite some time.
-Part I - Headers and dependencies
----------------------------------
+Headers and dependencies
+------------------------
-To do ISA style DMA you need to include two headers:
+To do ISA style DMA you need to include two headers::
-#include <linux/dma-mapping.h>
-#include <asm/dma.h>
+ #include <linux/dma-mapping.h>
+ #include <asm/dma.h>
The first is the generic DMA API used to convert virtual addresses to
bus addresses (see Documentation/DMA-API.txt for details).
@@ -23,8 +24,8 @@
Kconfig to be dependent on ISA_DMA_API (not ISA) so that nobody tries
to build your driver on unsupported platforms.
-Part II - Buffer allocation
----------------------------
+Buffer allocation
+-----------------
The ISA DMA controller has some very strict requirements on which
memory it can access so extra care must be taken when allocating
@@ -42,13 +43,13 @@
Unfortunately the memory available for ISA DMA is scarce so unless you
allocate the memory during boot-up it's a good idea to also pass
-__GFP_REPEAT and __GFP_NOWARN to make the allocator try a bit harder.
+__GFP_RETRY_MAYFAIL and __GFP_NOWARN to make the allocator try a bit harder.
(This scarcity also means that you should allocate the buffer as
early as possible and not release it until the driver is unloaded.)
-Part III - Address translation
-------------------------------
+Address translation
+-------------------
To translate the virtual address to a bus address, use the normal DMA
API. Do _not_ use isa_virt_to_phys() even though it does the same
@@ -61,8 +62,8 @@
been fixed. If your arch has problems then fix the DMA API instead of
reverting to the ISA functions.
-Part IV - Channels
-------------------
+Channels
+--------
A normal ISA DMA controller has 8 channels. The lower four are for
8-bit transfers and the upper four are for 16-bit transfers.
@@ -80,8 +81,8 @@
driver author but depends on what the hardware supports. Check your
specs or test different channels.
-Part V - Transfer data
-----------------------
+Transfer data
+-------------
Now for the good stuff, the actual DMA transfer. :)
@@ -112,37 +113,37 @@
the channel again. You should also check get_dma_residue() to make
sure that all data has been transferred.
-Example:
+Example::
-int flags, residue;
+ int flags, residue;
-flags = claim_dma_lock();
+ flags = claim_dma_lock();
-clear_dma_ff();
+ clear_dma_ff();
-set_dma_mode(channel, DMA_MODE_WRITE);
-set_dma_addr(channel, phys_addr);
-set_dma_count(channel, num_bytes);
+ set_dma_mode(channel, DMA_MODE_WRITE);
+ set_dma_addr(channel, phys_addr);
+ set_dma_count(channel, num_bytes);
-dma_enable(channel);
+ dma_enable(channel);
-release_dma_lock(flags);
+ release_dma_lock(flags);
-while (!device_done());
+ while (!device_done());
-flags = claim_dma_lock();
+ flags = claim_dma_lock();
-dma_disable(channel);
+ dma_disable(channel);
-residue = dma_get_residue(channel);
-if (residue != 0)
- printk(KERN_ERR "driver: Incomplete DMA transfer!"
- " %d bytes left!\n", residue);
+ residue = dma_get_residue(channel);
+ if (residue != 0)
+ printk(KERN_ERR "driver: Incomplete DMA transfer!"
+ " %d bytes left!\n", residue);
-release_dma_lock(flags);
+ release_dma_lock(flags);
-Part VI - Suspend/resume
-------------------------
+Suspend/resume
+--------------
It is the driver's responsibility to make sure that the machine isn't
suspended while a DMA transfer is in progress. Also, all DMA settings
diff --git a/Documentation/DMA-attributes.txt b/Documentation/DMA-attributes.txt
index 44c6bc4..8f8d97f 100644
--- a/Documentation/DMA-attributes.txt
+++ b/Documentation/DMA-attributes.txt
@@ -1,5 +1,6 @@
- DMA attributes
- ==============
+==============
+DMA attributes
+==============
This document describes the semantics of the DMA attributes that are
defined in linux/dma-mapping.h.
@@ -108,6 +109,7 @@
the time to try to allocate memory to in a way that gives better TLB
efficiency (AKA it's not worth trying to build the mapping out of larger
pages). You might want to specify this if:
+
- You know that the accesses to this memory won't thrash the TLB.
You might know that the accesses are likely to be sequential or
that they aren't sequential but it's unlikely you'll ping-pong
@@ -121,11 +123,12 @@
the mapping to have a short lifetime then it may be worth it to
optimize allocation (avoid coming up with large pages) instead of
getting the slight performance win of larger pages.
+
Setting this hint doesn't guarantee that you won't get huge pages, but it
means that we won't try quite as hard to get them.
-NOTE: At the moment DMA_ATTR_ALLOC_SINGLE_PAGES is only implemented on ARM,
-though ARM64 patches will likely be posted soon.
+.. note:: At the moment DMA_ATTR_ALLOC_SINGLE_PAGES is only implemented on ARM,
+ though ARM64 patches will likely be posted soon.
DMA_ATTR_NO_WARN
----------------
@@ -142,10 +145,10 @@
So, this provides a way for drivers to avoid those error messages on calls
where allocation failures are not a problem, and shouldn't bother the logs.
-NOTE: At the moment DMA_ATTR_NO_WARN is only implemented on PowerPC.
+.. note:: At the moment DMA_ATTR_NO_WARN is only implemented on PowerPC.
DMA_ATTR_PRIVILEGED
-------------------------------
+-------------------
Some advanced peripherals such as remote processors and GPUs perform
accesses to DMA buffers in both privileged "supervisor" and unprivileged
diff --git a/Documentation/IPMI.txt b/Documentation/IPMI.txt
index 6962cab..aa77a25 100644
--- a/Documentation/IPMI.txt
+++ b/Documentation/IPMI.txt
@@ -1,9 +1,8 @@
+=====================
+The Linux IPMI Driver
+=====================
- The Linux IPMI Driver
- ---------------------
- Corey Minyard
- <minyard@mvista.com>
- <minyard@acm.org>
+:Author: Corey Minyard <minyard@mvista.com> / <minyard@acm.org>
The Intelligent Platform Management Interface, or IPMI, is a
standard for controlling intelligent devices that monitor a system.
@@ -141,7 +140,7 @@
----------
The IPMI addressing works much like IP addresses, you have an overlay
-to handle the different address types. The overlay is:
+to handle the different address types. The overlay is::
struct ipmi_addr
{
@@ -153,7 +152,7 @@
The addr_type determines what the address really is. The driver
currently understands two different types of addresses.
-"System Interface" addresses are defined as:
+"System Interface" addresses are defined as::
struct ipmi_system_interface_addr
{
@@ -166,7 +165,7 @@
IPMI_BMC_CHANNEL.
Messages that are destined to go out on the IPMB bus use the
-IPMI_IPMB_ADDR_TYPE address type. The format is
+IPMI_IPMB_ADDR_TYPE address type. The format is::
struct ipmi_ipmb_addr
{
@@ -184,16 +183,16 @@
Messages
--------
-Messages are defined as:
+Messages are defined as::
-struct ipmi_msg
-{
+ struct ipmi_msg
+ {
unsigned char netfn;
unsigned char lun;
unsigned char cmd;
unsigned char *data;
int data_len;
-};
+ };
The driver takes care of adding/stripping the header information. The
data portion is just the data to be send (do NOT put addressing info
@@ -208,7 +207,7 @@
will have no place to put the message.
Messages coming up from the message handler in kernelland will come in
-as:
+as::
struct ipmi_recv_msg
{
@@ -246,6 +245,7 @@
Watching For Interfaces
+^^^^^^^^^^^^^^^^^^^^^^^
When your code comes up, the IPMI driver may or may not have detected
if IPMI devices exist. So you might have to defer your setup until
@@ -256,6 +256,7 @@
Creating the User
+^^^^^^^^^^^^^^^^^
To use the message handler, you must first create a user using
ipmi_create_user. The interface number specifies which SMI you want
@@ -272,6 +273,7 @@
Messaging
+^^^^^^^^^
To send a message from kernel-land, the ipmi_request_settime() call does
pretty much all message handling. Most of the parameter are
@@ -321,6 +323,7 @@
Events and Incoming Commands
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
The driver takes care of polling for IPMI events and receiving
commands (commands are messages that are not responses, they are
@@ -367,7 +370,7 @@
methods, depending on the system.
You can specify up to four interfaces on the module load line and
-control some module parameters:
+control some module parameters::
modprobe ipmi_si.o type=<type1>,<type2>....
ports=<port1>,<port2>... addrs=<addr1>,<addr2>...
@@ -437,7 +440,7 @@
obviously only useful for modules.
When compiled into the kernel, the parameters can be specified on the
-kernel command line as:
+kernel command line as::
ipmi_si.type=<type1>,<type2>...
ipmi_si.ports=<port1>,<port2>... ipmi_si.addrs=<addr1>,<addr2>...
@@ -474,16 +477,22 @@
interfaces can be added or removed after the kernel is up and running.
This is done using /sys/modules/ipmi_si/parameters/hotmod, which is a
write-only parameter. You write a string to this interface. The string
-has the format:
+has the format::
+
<op1>[:op2[:op3...]]
-The "op"s are:
+
+The "op"s are::
+
add|remove,kcs|bt|smic,mem|i/o,<address>[,<opt1>[,<opt2>[,...]]]
-You can specify more than one interface on the line. The "opt"s are:
+
+You can specify more than one interface on the line. The "opt"s are::
+
rsp=<regspacing>
rsi=<regsize>
rsh=<regshift>
irq=<irq>
ipmb=<ipmb slave addr>
+
and these have the same meanings as discussed above. Note that you
can also use this on the kernel command line for a more compact format
for specifying an interface. Note that when removing an interface,
@@ -496,7 +505,7 @@
The SMBus driver allows up to 4 SMBus devices to be configured in the
system. By default, the driver will only register with something it
finds in DMI or ACPI tables. You can change this
-at module load time (for a module) with:
+at module load time (for a module) with::
modprobe ipmi_ssif.o
addr=<i2caddr1>[,<i2caddr2>[,...]]
@@ -535,7 +544,7 @@
driver what to use.
When compiled into the kernel, the addresses can be specified on the
-kernel command line as:
+kernel command line as::
ipmb_ssif.addr=<i2caddr1>[,<i2caddr2>[...]]
ipmi_ssif.adapter=<adapter1>[,<adapter2>[...]]
@@ -565,9 +574,9 @@
the address came from or the raw base device for the IPMI interface.
You can use the IPMI smi_watcher to catch the IPMI interfaces as they
come or go, and to grab the information, you can use the function
-ipmi_get_smi_info(), which returns the following structure:
+ipmi_get_smi_info(), which returns the following structure::
-struct ipmi_smi_info {
+ struct ipmi_smi_info {
enum ipmi_addr_src addr_src;
struct device *dev;
union {
@@ -575,7 +584,7 @@
void *acpi_handle;
} acpi_info;
} addr_info;
-};
+ };
Currently special info for only for SI_ACPI address sources is
returned. Others may be added as necessary.
@@ -590,7 +599,7 @@
A watchdog timer is provided that implements the Linux-standard
watchdog timer interface. It has three module parameters that can be
-used to control it:
+used to control it::
modprobe ipmi_watchdog timeout=<t> pretimeout=<t> action=<action type>
preaction=<preaction type> preop=<preop type> start_now=x
@@ -635,7 +644,7 @@
if the CONFIG_WATCHDOG_NOWAYOUT option is enabled, or false if not.
When compiled into the kernel, the kernel command line is available
-for configuring the watchdog:
+for configuring the watchdog::
ipmi_watchdog.timeout=<t> ipmi_watchdog.pretimeout=<t>
ipmi_watchdog.action=<action type>
@@ -675,6 +684,7 @@
The field settings of the events are:
+
* Generator ID: 0x21 (kernel)
* EvM Rev: 0x03 (this event is formatting in IPMI 1.0 format)
* Sensor Type: 0x20 (OS critical stop sensor)
@@ -683,18 +693,20 @@
* Event Data 1: 0xa1 (Runtime stop in OEM bytes 2 and 3)
* Event data 2: second byte of panic string
* Event data 3: third byte of panic string
+
See the IPMI spec for the details of the event layout. This event is
always sent to the local management controller. It will handle routing
the message to the right place
Other OEM events have the following format:
-Record ID (bytes 0-1): Set by the SEL.
-Record type (byte 2): 0xf0 (OEM non-timestamped)
-byte 3: The slave address of the card saving the panic
-byte 4: A sequence number (starting at zero)
-The rest of the bytes (11 bytes) are the panic string. If the panic string
-is longer than 11 bytes, multiple messages will be sent with increasing
-sequence numbers.
+
+* Record ID (bytes 0-1): Set by the SEL.
+* Record type (byte 2): 0xf0 (OEM non-timestamped)
+* byte 3: The slave address of the card saving the panic
+* byte 4: A sequence number (starting at zero)
+ The rest of the bytes (11 bytes) are the panic string. If the panic string
+ is longer than 11 bytes, multiple messages will be sent with increasing
+ sequence numbers.
Because you cannot send OEM events using the standard interface, this
function will attempt to find an SEL and add the events there. It
diff --git a/Documentation/IRQ-affinity.txt b/Documentation/IRQ-affinity.txt
index 01a6751..29da500 100644
--- a/Documentation/IRQ-affinity.txt
+++ b/Documentation/IRQ-affinity.txt
@@ -1,8 +1,11 @@
-ChangeLog:
- Started by Ingo Molnar <mingo@redhat.com>
- Update by Max Krasnyansky <maxk@qualcomm.com>
-
+================
SMP IRQ affinity
+================
+
+ChangeLog:
+ - Started by Ingo Molnar <mingo@redhat.com>
+ - Update by Max Krasnyansky <maxk@qualcomm.com>
+
/proc/irq/IRQ#/smp_affinity and /proc/irq/IRQ#/smp_affinity_list specify
which target CPUs are permitted for a given IRQ source. It's a bitmask
@@ -16,50 +19,52 @@
Default mask is 0xffffffff.
Here is an example of restricting IRQ44 (eth1) to CPU0-3 then restricting
-it to CPU4-7 (this is an 8-CPU SMP box):
+it to CPU4-7 (this is an 8-CPU SMP box)::
-[root@moon 44]# cd /proc/irq/44
-[root@moon 44]# cat smp_affinity
-ffffffff
+ [root@moon 44]# cd /proc/irq/44
+ [root@moon 44]# cat smp_affinity
+ ffffffff
-[root@moon 44]# echo 0f > smp_affinity
-[root@moon 44]# cat smp_affinity
-0000000f
-[root@moon 44]# ping -f h
-PING hell (195.4.7.3): 56 data bytes
-...
---- hell ping statistics ---
-6029 packets transmitted, 6027 packets received, 0% packet loss
-round-trip min/avg/max = 0.1/0.1/0.4 ms
-[root@moon 44]# cat /proc/interrupts | grep 'CPU\|44:'
- CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7
- 44: 1068 1785 1785 1783 0 0 0 0 IO-APIC-level eth1
+ [root@moon 44]# echo 0f > smp_affinity
+ [root@moon 44]# cat smp_affinity
+ 0000000f
+ [root@moon 44]# ping -f h
+ PING hell (195.4.7.3): 56 data bytes
+ ...
+ --- hell ping statistics ---
+ 6029 packets transmitted, 6027 packets received, 0% packet loss
+ round-trip min/avg/max = 0.1/0.1/0.4 ms
+ [root@moon 44]# cat /proc/interrupts | grep 'CPU\|44:'
+ CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7
+ 44: 1068 1785 1785 1783 0 0 0 0 IO-APIC-level eth1
As can be seen from the line above IRQ44 was delivered only to the first four
processors (0-3).
Now lets restrict that IRQ to CPU(4-7).
-[root@moon 44]# echo f0 > smp_affinity
-[root@moon 44]# cat smp_affinity
-000000f0
-[root@moon 44]# ping -f h
-PING hell (195.4.7.3): 56 data bytes
-..
---- hell ping statistics ---
-2779 packets transmitted, 2777 packets received, 0% packet loss
-round-trip min/avg/max = 0.1/0.5/585.4 ms
-[root@moon 44]# cat /proc/interrupts | 'CPU\|44:'
- CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7
- 44: 1068 1785 1785 1783 1784 1069 1070 1069 IO-APIC-level eth1
+::
+
+ [root@moon 44]# echo f0 > smp_affinity
+ [root@moon 44]# cat smp_affinity
+ 000000f0
+ [root@moon 44]# ping -f h
+ PING hell (195.4.7.3): 56 data bytes
+ ..
+ --- hell ping statistics ---
+ 2779 packets transmitted, 2777 packets received, 0% packet loss
+ round-trip min/avg/max = 0.1/0.5/585.4 ms
+ [root@moon 44]# cat /proc/interrupts | 'CPU\|44:'
+ CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7
+ 44: 1068 1785 1785 1783 1784 1069 1070 1069 IO-APIC-level eth1
This time around IRQ44 was delivered only to the last four processors.
i.e counters for the CPU0-3 did not change.
-Here is an example of limiting that same irq (44) to cpus 1024 to 1031:
+Here is an example of limiting that same irq (44) to cpus 1024 to 1031::
-[root@moon 44]# echo 1024-1031 > smp_affinity_list
-[root@moon 44]# cat smp_affinity_list
-1024-1031
+ [root@moon 44]# echo 1024-1031 > smp_affinity_list
+ [root@moon 44]# cat smp_affinity_list
+ 1024-1031
Note that to do this with a bitmask would require 32 bitmasks of zero
to follow the pertinent one.
diff --git a/Documentation/IRQ-domain.txt b/Documentation/IRQ-domain.txt
index 1f246eb..4a1cd76 100644
--- a/Documentation/IRQ-domain.txt
+++ b/Documentation/IRQ-domain.txt
@@ -1,4 +1,6 @@
-irq_domain interrupt number mapping library
+===============================================
+The irq_domain interrupt number mapping library
+===============================================
The current design of the Linux kernel uses a single large number
space where each separate IRQ source is assigned a different number.
@@ -36,7 +38,9 @@
structure to hwirq numbers (Device Tree and ACPI GSI so far), and can
be easily extended to support other IRQ topology data sources.
-=== irq_domain usage ===
+irq_domain usage
+================
+
An interrupt controller driver creates and registers an irq_domain by
calling one of the irq_domain_add_*() functions (each mapping method
has a different allocator function, more on that later). The function
@@ -62,15 +66,21 @@
needs to know the associated hwirq number (such as in the irq_chip
callbacks) then it can be directly obtained from irq_data->hwirq.
-=== Types of irq_domain mappings ===
+Types of irq_domain mappings
+============================
+
There are several mechanisms available for reverse mapping from hwirq
to Linux irq, and each mechanism uses a different allocation function.
Which reverse map type should be used depends on the use case. Each
of the reverse map types are described below:
-==== Linear ====
-irq_domain_add_linear()
-irq_domain_create_linear()
+Linear
+------
+
+::
+
+ irq_domain_add_linear()
+ irq_domain_create_linear()
The linear reverse map maintains a fixed size table indexed by the
hwirq number. When a hwirq is mapped, an irq_desc is allocated for
@@ -89,9 +99,13 @@
The majority of drivers should use the linear map.
-==== Tree ====
-irq_domain_add_tree()
-irq_domain_create_tree()
+Tree
+----
+
+::
+
+ irq_domain_add_tree()
+ irq_domain_create_tree()
The irq_domain maintains a radix tree map from hwirq numbers to Linux
IRQs. When an hwirq is mapped, an irq_desc is allocated and the
@@ -109,8 +123,12 @@
Very few drivers should need this mapping.
-==== No Map ===-
-irq_domain_add_nomap()
+No Map
+------
+
+::
+
+ irq_domain_add_nomap()
The No Map mapping is to be used when the hwirq number is
programmable in the hardware. In this case it is best to program the
@@ -121,10 +139,14 @@
Most drivers cannot use this mapping.
-==== Legacy ====
-irq_domain_add_simple()
-irq_domain_add_legacy()
-irq_domain_add_legacy_isa()
+Legacy
+------
+
+::
+
+ irq_domain_add_simple()
+ irq_domain_add_legacy()
+ irq_domain_add_legacy_isa()
The Legacy mapping is a special case for drivers that already have a
range of irq_descs allocated for the hwirqs. It is used when the
@@ -163,14 +185,17 @@
before any irq_find_mapping() since the latter will actually work
for the static IRQ assignment case.
-==== Hierarchy IRQ domain ====
+Hierarchy IRQ domain
+--------------------
+
On some architectures, there may be multiple interrupt controllers
involved in delivering an interrupt from the device to the target CPU.
-Let's look at a typical interrupt delivering path on x86 platforms:
+Let's look at a typical interrupt delivering path on x86 platforms::
-Device --> IOAPIC -> Interrupt remapping Controller -> Local APIC -> CPU
+ Device --> IOAPIC -> Interrupt remapping Controller -> Local APIC -> CPU
There are three interrupt controllers involved:
+
1) IOAPIC controller
2) Interrupt remapping controller
3) Local APIC controller
@@ -180,7 +205,8 @@
interrupt controller and those irq_domains are organized into hierarchy.
When building irq_domain hierarchy, the irq_domain near to the device is
child and the irq_domain near to CPU is parent. So a hierarchy structure
-as below will be built for the example above.
+as below will be built for the example above::
+
CPU Vector irq_domain (root irq_domain to manage CPU vectors)
^
|
@@ -190,6 +216,7 @@
IOAPIC irq_domain (manage IOAPIC delivery entries/pins)
There are four major interfaces to use hierarchy irq_domain:
+
1) irq_domain_alloc_irqs(): allocate IRQ descriptors and interrupt
controller related resources to deliver these interrupts.
2) irq_domain_free_irqs(): free IRQ descriptors and interrupt controller
@@ -199,7 +226,8 @@
4) irq_domain_deactivate_irq(): deactivate interrupt controller hardware
to stop delivering the interrupt.
-Following changes are needed to support hierarchy irq_domain.
+Following changes are needed to support hierarchy irq_domain:
+
1) a new field 'parent' is added to struct irq_domain; it's used to
maintain irq_domain hierarchy information.
2) a new field 'parent_data' is added to struct irq_data; it's used to
@@ -223,6 +251,7 @@
For an interrupt controller driver to support hierarchy irq_domain, it
needs to:
+
1) Implement irq_domain_ops.alloc and irq_domain_ops.free
2) Optionally implement irq_domain_ops.activate and
irq_domain_ops.deactivate.
diff --git a/Documentation/IRQ.txt b/Documentation/IRQ.txt
index 1011e71..4273806 100644
--- a/Documentation/IRQ.txt
+++ b/Documentation/IRQ.txt
@@ -1,4 +1,6 @@
+===============
What is an IRQ?
+===============
An IRQ is an interrupt request from a device.
Currently they can come in over a pin, or over a packet.
diff --git a/Documentation/Intel-IOMMU.txt b/Documentation/Intel-IOMMU.txt
index 49585b6..9dae6b4 100644
--- a/Documentation/Intel-IOMMU.txt
+++ b/Documentation/Intel-IOMMU.txt
@@ -1,3 +1,4 @@
+===================
Linux IOMMU Support
===================
@@ -9,11 +10,11 @@
Some Keywords
-DMAR - DMA remapping
-DRHD - DMA Remapping Hardware Unit Definition
-RMRR - Reserved memory Region Reporting Structure
-ZLR - Zero length reads from PCI devices
-IOVA - IO Virtual address.
+- DMAR - DMA remapping
+- DRHD - DMA Remapping Hardware Unit Definition
+- RMRR - Reserved memory Region Reporting Structure
+- ZLR - Zero length reads from PCI devices
+- IOVA - IO Virtual address.
Basic stuff
-----------
@@ -33,7 +34,7 @@
unity mappings for these regions for these devices to access these regions.
How is IOVA generated?
----------------------
+----------------------
Well behaved drivers call pci_map_*() calls before sending command to device
that needs to perform DMA. Once DMA is completed and mapping is no longer
@@ -82,14 +83,14 @@
ACPI: DMAR (v001 A M I OEMDMAR 0x00000001 MSFT 0x00000097) @ 0x000000007f5b5ef0
When DMAR is being processed and initialized by ACPI, prints DMAR locations
-and any RMRR's processed.
+and any RMRR's processed::
-ACPI DMAR:Host address width 36
-ACPI DMAR:DRHD (flags: 0x00000000)base: 0x00000000fed90000
-ACPI DMAR:DRHD (flags: 0x00000000)base: 0x00000000fed91000
-ACPI DMAR:DRHD (flags: 0x00000001)base: 0x00000000fed93000
-ACPI DMAR:RMRR base: 0x00000000000ed000 end: 0x00000000000effff
-ACPI DMAR:RMRR base: 0x000000007f600000 end: 0x000000007fffffff
+ ACPI DMAR:Host address width 36
+ ACPI DMAR:DRHD (flags: 0x00000000)base: 0x00000000fed90000
+ ACPI DMAR:DRHD (flags: 0x00000000)base: 0x00000000fed91000
+ ACPI DMAR:DRHD (flags: 0x00000001)base: 0x00000000fed93000
+ ACPI DMAR:RMRR base: 0x00000000000ed000 end: 0x00000000000effff
+ ACPI DMAR:RMRR base: 0x000000007f600000 end: 0x000000007fffffff
When DMAR is enabled for use, you will notice..
@@ -98,10 +99,12 @@
Fault reporting
---------------
-DMAR:[DMA Write] Request device [00:02.0] fault addr 6df084000
-DMAR:[fault reason 05] PTE Write access is not set
-DMAR:[DMA Write] Request device [00:02.0] fault addr 6df084000
-DMAR:[fault reason 05] PTE Write access is not set
+::
+
+ DMAR:[DMA Write] Request device [00:02.0] fault addr 6df084000
+ DMAR:[fault reason 05] PTE Write access is not set
+ DMAR:[DMA Write] Request device [00:02.0] fault addr 6df084000
+ DMAR:[fault reason 05] PTE Write access is not set
TBD
----
diff --git a/Documentation/SAK.txt b/Documentation/SAK.txt
index 74be146..260e1d3 100644
--- a/Documentation/SAK.txt
+++ b/Documentation/SAK.txt
@@ -1,5 +1,9 @@
-Linux 2.4.2 Secure Attention Key (SAK) handling
-18 March 2001, Andrew Morton
+=========================================
+Linux Secure Attention Key (SAK) handling
+=========================================
+
+:Date: 18 March 2001
+:Author: Andrew Morton
An operating system's Secure Attention Key is a security tool which is
provided as protection against trojan password capturing programs. It
@@ -13,7 +17,7 @@
sysrq support.
The proper way of generating a SAK is to define the key sequence using
-`loadkeys'. This will work whether or not sysrq support is compiled
+``loadkeys``. This will work whether or not sysrq support is compiled
into the kernel.
SAK works correctly when the keyboard is in raw mode. This means that
@@ -25,64 +29,63 @@
the machine. CTRL-ALT-BACKSPACE is magical to the X server. We'll
choose CTRL-ALT-PAUSE.
-In your rc.sysinit (or rc.local) file, add the command
+In your rc.sysinit (or rc.local) file, add the command::
echo "control alt keycode 101 = SAK" | /bin/loadkeys
And that's it! Only the superuser may reprogram the SAK key.
-NOTES
-=====
+.. note::
-1: Linux SAK is said to be not a "true SAK" as is required by
- systems which implement C2 level security. This author does not
- know why.
+ 1. Linux SAK is said to be not a "true SAK" as is required by
+ systems which implement C2 level security. This author does not
+ know why.
-2: On the PC keyboard, SAK kills all applications which have
- /dev/console opened.
+ 2. On the PC keyboard, SAK kills all applications which have
+ /dev/console opened.
- Unfortunately this includes a number of things which you don't
- actually want killed. This is because these applications are
- incorrectly holding /dev/console open. Be sure to complain to your
- Linux distributor about this!
+ Unfortunately this includes a number of things which you don't
+ actually want killed. This is because these applications are
+ incorrectly holding /dev/console open. Be sure to complain to your
+ Linux distributor about this!
- You can identify processes which will be killed by SAK with the
- command
+ You can identify processes which will be killed by SAK with the
+ command::
# ls -l /proc/[0-9]*/fd/* | grep console
l-wx------ 1 root root 64 Mar 18 00:46 /proc/579/fd/0 -> /dev/console
- Then:
+ Then::
# ps aux|grep 579
root 579 0.0 0.1 1088 436 ? S 00:43 0:00 gpm -t ps/2
- So `gpm' will be killed by SAK. This is a bug in gpm. It should
- be closing standard input. You can work around this by finding the
- initscript which launches gpm and changing it thusly:
+ So ``gpm`` will be killed by SAK. This is a bug in gpm. It should
+ be closing standard input. You can work around this by finding the
+ initscript which launches gpm and changing it thusly:
- Old:
+ Old::
daemon gpm
- New:
+ New::
daemon gpm < /dev/null
- Vixie cron also seems to have this problem, and needs the same treatment.
+ Vixie cron also seems to have this problem, and needs the same treatment.
- Also, one prominent Linux distribution has the following three
- lines in its rc.sysinit and rc scripts:
+ Also, one prominent Linux distribution has the following three
+ lines in its rc.sysinit and rc scripts::
exec 3<&0
exec 4>&1
exec 5>&2
- These commands cause *all* daemons which are launched by the
- initscripts to have file descriptors 3, 4 and 5 attached to
- /dev/console. So SAK kills them all. A workaround is to simply
- delete these lines, but this may cause system management
- applications to malfunction - test everything well.
+ These commands cause **all** daemons which are launched by the
+ initscripts to have file descriptors 3, 4 and 5 attached to
+ /dev/console. So SAK kills them all. A workaround is to simply
+ delete these lines, but this may cause system management
+ applications to malfunction - test everything well.
diff --git a/Documentation/SM501.txt b/Documentation/SM501.txt
index 561826f..8825074 100644
--- a/Documentation/SM501.txt
+++ b/Documentation/SM501.txt
@@ -1,7 +1,10 @@
- SM501 Driver
- ============
+.. include:: <isonum.txt>
-Copyright 2006, 2007 Simtec Electronics
+============
+SM501 Driver
+============
+
+:Copyright: |copy| 2006, 2007 Simtec Electronics
The Silicon Motion SM501 multimedia companion chip is a multifunction device
which may provide numerous interfaces including USB host controller USB gadget,
diff --git a/Documentation/admin-guide/pm/cpufreq.rst b/Documentation/admin-guide/pm/cpufreq.rst
index 463cf7e..7af83a9 100644
--- a/Documentation/admin-guide/pm/cpufreq.rst
+++ b/Documentation/admin-guide/pm/cpufreq.rst
@@ -237,6 +237,14 @@
This attribute is not present if the scaling driver in use does not
support it.
+``cpuinfo_cur_freq``
+ Current frequency of the CPUs belonging to this policy as obtained from
+ the hardware (in KHz).
+
+ This is expected to be the frequency the hardware actually runs at.
+ If that frequency cannot be determined, this attribute should not
+ be present.
+
``cpuinfo_max_freq``
Maximum possible operating frequency the CPUs belonging to this policy
can run at (in kHz).
diff --git a/Documentation/arm64/silicon-errata.txt b/Documentation/arm64/silicon-errata.txt
index f5f93dc..66e8ce1 100644
--- a/Documentation/arm64/silicon-errata.txt
+++ b/Documentation/arm64/silicon-errata.txt
@@ -61,12 +61,15 @@
| Cavium | ThunderX ITS | #23144 | CAVIUM_ERRATUM_23144 |
| Cavium | ThunderX GICv3 | #23154 | CAVIUM_ERRATUM_23154 |
| Cavium | ThunderX Core | #27456 | CAVIUM_ERRATUM_27456 |
-| Cavium | ThunderX SMMUv2 | #27704 | N/A |
| Cavium | ThunderX Core | #30115 | CAVIUM_ERRATUM_30115 |
+| Cavium | ThunderX SMMUv2 | #27704 | N/A |
+| Cavium | ThunderX2 SMMUv3| #74 | N/A |
+| Cavium | ThunderX2 SMMUv3| #126 | N/A |
| | | | |
| Freescale/NXP | LS2080A/LS1043A | A-008585 | FSL_ERRATUM_A008585 |
| | | | |
| Hisilicon | Hip0{5,6,7} | #161010101 | HISILICON_ERRATUM_161010101 |
+| Hisilicon | Hip0{6,7} | #161010701 | N/A |
| | | | |
| Qualcomm Tech. | Falkor v1 | E1003 | QCOM_FALKOR_ERRATUM_1003 |
| Qualcomm Tech. | Falkor v1 | E1009 | QCOM_FALKOR_ERRATUM_1009 |
diff --git a/Documentation/bcache.txt b/Documentation/bcache.txt
index a9259b5..c0ce64d 100644
--- a/Documentation/bcache.txt
+++ b/Documentation/bcache.txt
@@ -1,10 +1,15 @@
+============================
+A block layer cache (bcache)
+============================
+
Say you've got a big slow raid 6, and an ssd or three. Wouldn't it be
nice if you could use them as cache... Hence bcache.
Wiki and git repositories are at:
- http://bcache.evilpiepirate.org
- http://evilpiepirate.org/git/linux-bcache.git
- http://evilpiepirate.org/git/bcache-tools.git
+
+ - http://bcache.evilpiepirate.org
+ - http://evilpiepirate.org/git/linux-bcache.git
+ - http://evilpiepirate.org/git/bcache-tools.git
It's designed around the performance characteristics of SSDs - it only allocates
in erase block sized buckets, and it uses a hybrid btree/log to track cached
@@ -37,17 +42,19 @@
Getting started:
You'll need make-bcache from the bcache-tools repository. Both the cache device
-and backing device must be formatted before use.
+and backing device must be formatted before use::
+
make-bcache -B /dev/sdb
make-bcache -C /dev/sdc
make-bcache has the ability to format multiple devices at the same time - if
you format your backing devices and cache device at the same time, you won't
-have to manually attach:
+have to manually attach::
+
make-bcache -B /dev/sda /dev/sdb -C /dev/sdc
bcache-tools now ships udev rules, and bcache devices are known to the kernel
-immediately. Without udev, you can manually register devices like this:
+immediately. Without udev, you can manually register devices like this::
echo /dev/sdb > /sys/fs/bcache/register
echo /dev/sdc > /sys/fs/bcache/register
@@ -60,16 +67,16 @@
a caching device later.
See 'ATTACHING' section below.
-The devices show up as:
+The devices show up as::
/dev/bcache<N>
-As well as (with udev):
+As well as (with udev)::
/dev/bcache/by-uuid/<uuid>
/dev/bcache/by-label/<label>
-To get started:
+To get started::
mkfs.ext4 /dev/bcache0
mount /dev/bcache0 /mnt
@@ -81,13 +88,13 @@
but will allow for mirroring of metadata and dirty data in the future. Your new
cache set shows up as /sys/fs/bcache/<UUID>
-ATTACHING
+Attaching
---------
After your cache device and backing device are registered, the backing device
must be attached to your cache set to enable caching. Attaching a backing
device to a cache set is done thusly, with the UUID of the cache set in
-/sys/fs/bcache:
+/sys/fs/bcache::
echo <CSET-UUID> > /sys/block/bcache0/bcache/attach
@@ -97,7 +104,7 @@
important if you have writeback caching turned on.
If you're booting up and your cache device is gone and never coming back, you
-can force run the backing device:
+can force run the backing device::
echo 1 > /sys/block/sdb/bcache/running
@@ -110,7 +117,7 @@
cache, don't expect the filesystem to be recoverable - you will have massive
filesystem corruption, though ext4's fsck does work miracles.
-ERROR HANDLING
+Error Handling
--------------
Bcache tries to transparently handle IO errors to/from the cache device without
@@ -134,25 +141,27 @@
read some of the dirty data, though.
-HOWTO/COOKBOOK
+Howto/cookbook
--------------
A) Starting a bcache with a missing caching device
If registering the backing device doesn't help, it's already there, you just need
-to force it to run without the cache:
+to force it to run without the cache::
+
host:~# echo /dev/sdb1 > /sys/fs/bcache/register
[ 119.844831] bcache: register_bcache() error opening /dev/sdb1: device already registered
Next, you try to register your caching device if it's present. However
if it's absent, or registration fails for some reason, you can still
-start your bcache without its cache, like so:
+start your bcache without its cache, like so::
+
host:/sys/block/sdb/sdb1/bcache# echo 1 > running
Note that this may cause data loss if you were running in writeback mode.
-B) Bcache does not find its cache
+B) Bcache does not find its cache::
host:/sys/block/md5/bcache# echo 0226553a-37cf-41d5-b3ce-8b1e944543a8 > attach
[ 1933.455082] bcache: bch_cached_dev_attach() Couldn't find uuid for md5 in set
@@ -160,7 +169,8 @@
[ 1933.478179] : cache set not found
In this case, the caching device was simply not registered at boot
-or disappeared and came back, and needs to be (re-)registered:
+or disappeared and came back, and needs to be (re-)registered::
+
host:/sys/block/md5/bcache# echo /dev/sdh2 > /sys/fs/bcache/register
@@ -180,7 +190,8 @@
of the backing device created with --offset 8K, or any value defined by
--data-offset when you originally formatted bcache with `make-bcache`.
-For example:
+For example::
+
losetup -o 8192 /dev/loop0 /dev/your_bcache_backing_dev
This should present your unmodified backing device data in /dev/loop0
@@ -191,33 +202,38 @@
E) Wiping a cache device
-host:~# wipefs -a /dev/sdh2
-16 bytes were erased at offset 0x1018 (bcache)
-they were: c6 85 73 f6 4e 1a 45 ca 82 65 f5 7f 48 ba 6d 81
+::
-After you boot back with bcache enabled, you recreate the cache and attach it:
-host:~# make-bcache -C /dev/sdh2
-UUID: 7be7e175-8f4c-4f99-94b2-9c904d227045
-Set UUID: 5bc072a8-ab17-446d-9744-e247949913c1
-version: 0
-nbuckets: 106874
-block_size: 1
-bucket_size: 1024
-nr_in_set: 1
-nr_this_dev: 0
-first_bucket: 1
-[ 650.511912] bcache: run_cache_set() invalidating existing data
-[ 650.549228] bcache: register_cache() registered cache device sdh2
+ host:~# wipefs -a /dev/sdh2
+ 16 bytes were erased at offset 0x1018 (bcache)
+ they were: c6 85 73 f6 4e 1a 45 ca 82 65 f5 7f 48 ba 6d 81
-start backing device with missing cache:
-host:/sys/block/md5/bcache# echo 1 > running
+After you boot back with bcache enabled, you recreate the cache and attach it::
-attach new cache:
-host:/sys/block/md5/bcache# echo 5bc072a8-ab17-446d-9744-e247949913c1 > attach
-[ 865.276616] bcache: bch_cached_dev_attach() Caching md5 as bcache0 on set 5bc072a8-ab17-446d-9744-e247949913c1
+ host:~# make-bcache -C /dev/sdh2
+ UUID: 7be7e175-8f4c-4f99-94b2-9c904d227045
+ Set UUID: 5bc072a8-ab17-446d-9744-e247949913c1
+ version: 0
+ nbuckets: 106874
+ block_size: 1
+ bucket_size: 1024
+ nr_in_set: 1
+ nr_this_dev: 0
+ first_bucket: 1
+ [ 650.511912] bcache: run_cache_set() invalidating existing data
+ [ 650.549228] bcache: register_cache() registered cache device sdh2
+
+start backing device with missing cache::
+
+ host:/sys/block/md5/bcache# echo 1 > running
+
+attach new cache::
+
+ host:/sys/block/md5/bcache# echo 5bc072a8-ab17-446d-9744-e247949913c1 > attach
+ [ 865.276616] bcache: bch_cached_dev_attach() Caching md5 as bcache0 on set 5bc072a8-ab17-446d-9744-e247949913c1
-F) Remove or replace a caching device
+F) Remove or replace a caching device::
host:/sys/block/sda/sda7/bcache# echo 1 > detach
[ 695.872542] bcache: cached_dev_detach_finish() Caching disabled for sda7
@@ -226,13 +242,15 @@
wipefs: error: /dev/nvme0n1p4: probing initialization failed: Device or resource busy
Ooops, it's disabled, but not unregistered, so it's still protected
-We need to go and unregister it:
+We need to go and unregister it::
+
host:/sys/fs/bcache/b7ba27a1-2398-4649-8ae3-0959f57ba128# ls -l cache0
lrwxrwxrwx 1 root root 0 Feb 25 18:33 cache0 -> ../../../devices/pci0000:00/0000:00:1d.0/0000:70:00.0/nvme/nvme0/nvme0n1/nvme0n1p4/bcache/
host:/sys/fs/bcache/b7ba27a1-2398-4649-8ae3-0959f57ba128# echo 1 > stop
kernel: [ 917.041908] bcache: cache_set_free() Cache set b7ba27a1-2398-4649-8ae3-0959f57ba128 unregistered
-Now we can wipe it:
+Now we can wipe it::
+
host:~# wipefs -a /dev/nvme0n1p4
/dev/nvme0n1p4: 16 bytes were erased at offset 0x00001018 (bcache): c6 85 73 f6 4e 1a 45 ca 82 65 f5 7f 48 ba 6d 81
@@ -252,40 +270,44 @@
1) Is it present in /dev/bcache* ? (there are times where it won't be)
-If so, it's easy:
+ If so, it's easy::
+
host:/sys/block/bcache0/bcache# echo 1 > stop
-2) But if your backing device is gone, this won't work:
+2) But if your backing device is gone, this won't work::
+
host:/sys/block/bcache0# cd bcache
bash: cd: bcache: No such file or directory
-In this case, you may have to unregister the dmcrypt block device that
-references this bcache to free it up:
+ In this case, you may have to unregister the dmcrypt block device that
+ references this bcache to free it up::
+
host:~# dmsetup remove oldds1
bcache: bcache_device_free() bcache0 stopped
bcache: cache_set_free() Cache set 5bc072a8-ab17-446d-9744-e247949913c1 unregistered
-This causes the backing bcache to be removed from /sys/fs/bcache and
-then it can be reused. This would be true of any block device stacking
-where bcache is a lower device.
+ This causes the backing bcache to be removed from /sys/fs/bcache and
+ then it can be reused. This would be true of any block device stacking
+ where bcache is a lower device.
-3) In other cases, you can also look in /sys/fs/bcache/:
+3) In other cases, you can also look in /sys/fs/bcache/::
-host:/sys/fs/bcache# ls -l */{cache?,bdev?}
-lrwxrwxrwx 1 root root 0 Mar 5 09:39 0226553a-37cf-41d5-b3ce-8b1e944543a8/bdev1 -> ../../../devices/virtual/block/dm-1/bcache/
-lrwxrwxrwx 1 root root 0 Mar 5 09:39 0226553a-37cf-41d5-b3ce-8b1e944543a8/cache0 -> ../../../devices/virtual/block/dm-4/bcache/
-lrwxrwxrwx 1 root root 0 Mar 5 09:39 5bc072a8-ab17-446d-9744-e247949913c1/cache0 -> ../../../devices/pci0000:00/0000:00:01.0/0000:01:00.0/ata10/host9/target9:0:0/9:0:0:0/block/sdl/sdl2/bcache/
+ host:/sys/fs/bcache# ls -l */{cache?,bdev?}
+ lrwxrwxrwx 1 root root 0 Mar 5 09:39 0226553a-37cf-41d5-b3ce-8b1e944543a8/bdev1 -> ../../../devices/virtual/block/dm-1/bcache/
+ lrwxrwxrwx 1 root root 0 Mar 5 09:39 0226553a-37cf-41d5-b3ce-8b1e944543a8/cache0 -> ../../../devices/virtual/block/dm-4/bcache/
+ lrwxrwxrwx 1 root root 0 Mar 5 09:39 5bc072a8-ab17-446d-9744-e247949913c1/cache0 -> ../../../devices/pci0000:00/0000:00:01.0/0000:01:00.0/ata10/host9/target9:0:0/9:0:0:0/block/sdl/sdl2/bcache/
-The device names will show which UUID is relevant, cd in that directory
-and stop the cache:
+ The device names will show which UUID is relevant, cd in that directory
+ and stop the cache::
+
host:/sys/fs/bcache/5bc072a8-ab17-446d-9744-e247949913c1# echo 1 > stop
-This will free up bcache references and let you reuse the partition for
-other purposes.
+ This will free up bcache references and let you reuse the partition for
+ other purposes.
-TROUBLESHOOTING PERFORMANCE
+Troubleshooting performance
---------------------------
Bcache has a bunch of config options and tunables. The defaults are intended to
@@ -301,11 +323,13 @@
raid stripe size to get the disk multiples that you would like.
For example: If you have a 64k stripe size, then the following offset
- would provide alignment for many common RAID5 data spindle counts:
+ would provide alignment for many common RAID5 data spindle counts::
+
64k * 2*2*2*3*3*5*7 bytes = 161280k
That space is wasted, but for only 157.5MB you can grow your RAID 5
- volume to the following data-spindle counts without re-aligning:
+ volume to the following data-spindle counts without re-aligning::
+
3,4,5,6,7,8,9,10,12,14,15,18,20,21 ...
- Bad write performance
@@ -313,9 +337,9 @@
If write performance is not what you expected, you probably wanted to be
running in writeback mode, which isn't the default (not due to a lack of
maturity, but simply because in writeback mode you'll lose data if something
- happens to your SSD)
+ happens to your SSD)::
- # echo writeback > /sys/block/bcache0/bcache/cache_mode
+ # echo writeback > /sys/block/bcache0/bcache/cache_mode
- Bad performance, or traffic not going to the SSD that you'd expect
@@ -325,13 +349,13 @@
accessed data out of your cache.
But if you want to benchmark reads from cache, and you start out with fio
- writing an 8 gigabyte test file - so you want to disable that.
+ writing an 8 gigabyte test file - so you want to disable that::
- # echo 0 > /sys/block/bcache0/bcache/sequential_cutoff
+ # echo 0 > /sys/block/bcache0/bcache/sequential_cutoff
- To set it back to the default (4 mb), do
+ To set it back to the default (4 mb), do::
- # echo 4M > /sys/block/bcache0/bcache/sequential_cutoff
+ # echo 4M > /sys/block/bcache0/bcache/sequential_cutoff
- Traffic's still going to the spindle/still getting cache misses
@@ -344,10 +368,10 @@
throttles traffic if the latency exceeds a threshold (it does this by
cranking down the sequential bypass).
- You can disable this if you need to by setting the thresholds to 0:
+ You can disable this if you need to by setting the thresholds to 0::
- # echo 0 > /sys/fs/bcache/<cache set>/congested_read_threshold_us
- # echo 0 > /sys/fs/bcache/<cache set>/congested_write_threshold_us
+ # echo 0 > /sys/fs/bcache/<cache set>/congested_read_threshold_us
+ # echo 0 > /sys/fs/bcache/<cache set>/congested_write_threshold_us
The default is 2000 us (2 milliseconds) for reads, and 20000 for writes.
@@ -369,7 +393,7 @@
a fix for the issue there).
-SYSFS - BACKING DEVICE
+Sysfs - backing device
----------------------
Available at /sys/block/<bdev>/bcache, /sys/block/bcache*/bcache and
@@ -454,7 +478,8 @@
still be added to the cache until it is mostly full; only meant for
benchmarking. Defaults to on.
-SYSFS - BACKING DEVICE STATS:
+Sysfs - backing device stats
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
There are directories with these numbers for a running total, as well as
versions that decay over the past day, hour and 5 minutes; they're also
@@ -463,14 +488,11 @@
bypassed
Amount of IO (both reads and writes) that has bypassed the cache
-cache_hits
-cache_misses
-cache_hit_ratio
+cache_hits, cache_misses, cache_hit_ratio
Hits and misses are counted per individual IO as bcache sees them; a
partial hit is counted as a miss.
-cache_bypass_hits
-cache_bypass_misses
+cache_bypass_hits, cache_bypass_misses
Hits and misses for IO that is intended to skip the cache are still counted,
but broken out here.
@@ -482,7 +504,8 @@
cache_readaheads
Count of times readahead occurred.
-SYSFS - CACHE SET:
+Sysfs - cache set
+~~~~~~~~~~~~~~~~~
Available at /sys/fs/bcache/<cset-uuid>
@@ -520,8 +543,7 @@
Echoing a size to this file (in human readable units, k/M/G) creates a thinly
provisioned volume backed by the cache set.
-io_error_halflife
-io_error_limit
+io_error_halflife, io_error_limit
These determines how many errors we accept before disabling the cache.
Each error is decayed by the half life (in # ios). If the decaying count
reaches io_error_limit dirty data is written out and the cache is disabled.
@@ -545,7 +567,8 @@
Detaches all backing devices and closes the cache devices; if dirty data is
present it will disable writeback caching and wait for it to be flushed.
-SYSFS - CACHE SET INTERNAL:
+Sysfs - cache set internal
+~~~~~~~~~~~~~~~~~~~~~~~~~~
This directory also exposes timings for a number of internal operations, with
separate files for average duration, average frequency, last occurrence and max
@@ -574,7 +597,8 @@
trigger_gc
Writing to this file forces garbage collection to run.
-SYSFS - CACHE DEVICE:
+Sysfs - Cache device
+~~~~~~~~~~~~~~~~~~~~
Available at /sys/block/<cdev>/bcache
diff --git a/Documentation/blockdev/cciss.txt b/Documentation/blockdev/cciss.txt
deleted file mode 100644
index 3a5477c..0000000
--- a/Documentation/blockdev/cciss.txt
+++ /dev/null
@@ -1,194 +0,0 @@
-This driver is for Compaq's SMART Array Controllers.
-
-Supported Cards:
-----------------
-
-This driver is known to work with the following cards:
-
- * SA 5300
- * SA 5i
- * SA 532
- * SA 5312
- * SA 641
- * SA 642
- * SA 6400
- * SA 6400 U320 Expansion Module
- * SA 6i
- * SA P600
- * SA P800
- * SA E400
- * SA P400i
- * SA E200
- * SA E200i
- * SA E500
- * SA P700m
- * SA P212
- * SA P410
- * SA P410i
- * SA P411
- * SA P812
- * SA P712m
- * SA P711m
-
-Detecting drive failures:
--------------------------
-
-To get the status of logical volumes and to detect physical drive
-failures, you can use the cciss_vol_status program found here:
-http://cciss.sourceforge.net/#cciss_utils
-
-Device Naming:
---------------
-
-If nodes are not already created in the /dev/cciss directory, run as root:
-
-# cd /dev
-# ./MAKEDEV cciss
-
-You need some entries in /dev for the cciss device. The MAKEDEV script
-can make device nodes for you automatically. Currently the device setup
-is as follows:
-
-Major numbers:
- 104 cciss0
- 105 cciss1
- 106 cciss2
- 105 cciss3
- 108 cciss4
- 109 cciss5
- 110 cciss6
- 111 cciss7
-
-Minor numbers:
- b7 b6 b5 b4 b3 b2 b1 b0
- |----+----| |----+----|
- | |
- | +-------- Partition ID (0=wholedev, 1-15 partition)
- |
- +-------------------- Logical Volume number
-
-The device naming scheme is:
-/dev/cciss/c0d0 Controller 0, disk 0, whole device
-/dev/cciss/c0d0p1 Controller 0, disk 0, partition 1
-/dev/cciss/c0d0p2 Controller 0, disk 0, partition 2
-/dev/cciss/c0d0p3 Controller 0, disk 0, partition 3
-
-/dev/cciss/c1d1 Controller 1, disk 1, whole device
-/dev/cciss/c1d1p1 Controller 1, disk 1, partition 1
-/dev/cciss/c1d1p2 Controller 1, disk 1, partition 2
-/dev/cciss/c1d1p3 Controller 1, disk 1, partition 3
-
-CCISS simple mode support
--------------------------
-
-The "cciss_simple_mode=1" boot parameter may be used to prevent the driver
-from putting the controller into "performant" mode. The difference is that
-with simple mode, each command completion requires an interrupt, while with
-"performant mode" (the default, and ordinarily better performing) it is
-possible to have multiple command completions indicated by a single
-interrupt.
-
-SCSI tape drive and medium changer support
-------------------------------------------
-
-SCSI sequential access devices and medium changer devices are supported and
-appropriate device nodes are automatically created. (e.g.
-/dev/st0, /dev/st1, etc. See the "st" man page for more details.)
-You must enable "SCSI tape drive support for Smart Array 5xxx" and
-"SCSI support" in your kernel configuration to be able to use SCSI
-tape drives with your Smart Array 5xxx controller.
-
-Additionally, note that the driver will engage the SCSI core at init
-time if any tape drives or medium changers are detected. The driver may
-also be directed to dynamically engage the SCSI core via the /proc filesystem
-entry which the "block" side of the driver creates as
-/proc/driver/cciss/cciss* at runtime. This is best done via a script.
-
-For example:
-
- for x in /proc/driver/cciss/cciss[0-9]*
- do
- echo "engage scsi" > $x
- done
-
-Once the SCSI core is engaged by the driver, it cannot be disengaged
-(except by unloading the driver, if it happens to be linked as a module.)
-
-Note also that if no sequential access devices or medium changers are
-detected, the SCSI core will not be engaged by the action of the above
-script.
-
-Hot plug support for SCSI tape drives
--------------------------------------
-
-Hot plugging of SCSI tape drives is supported, with some caveats.
-The cciss driver must be informed that changes to the SCSI bus
-have been made. This may be done via the /proc filesystem.
-For example:
-
- echo "rescan" > /proc/scsi/cciss0/1
-
-This causes the driver to query the adapter about changes to the
-physical SCSI buses and/or fibre channel arbitrated loop and the
-driver to make note of any new or removed sequential access devices
-or medium changers. The driver will output messages indicating what
-devices have been added or removed and the controller, bus, target and
-lun used to address the device. It then notifies the SCSI mid layer
-of these changes.
-
-Note that the naming convention of the /proc filesystem entries
-contains a number in addition to the driver name. (E.g. "cciss0"
-instead of just "cciss" which you might expect.)
-
-Note: ONLY sequential access devices and medium changers are presented
-as SCSI devices to the SCSI mid layer by the cciss driver. Specifically,
-physical SCSI disk drives are NOT presented to the SCSI mid layer. The
-physical SCSI disk drives are controlled directly by the array controller
-hardware and it is important to prevent the kernel from attempting to directly
-access these devices too, as if the array controller were merely a SCSI
-controller in the same way that we are allowing it to access SCSI tape drives.
-
-SCSI error handling for tape drives and medium changers
--------------------------------------------------------
-
-The linux SCSI mid layer provides an error handling protocol which
-kicks into gear whenever a SCSI command fails to complete within a
-certain amount of time (which can vary depending on the command).
-The cciss driver participates in this protocol to some extent. The
-normal protocol is a four step process. First the device is told
-to abort the command. If that doesn't work, the device is reset.
-If that doesn't work, the SCSI bus is reset. If that doesn't work
-the host bus adapter is reset. Because the cciss driver is a block
-driver as well as a SCSI driver and only the tape drives and medium
-changers are presented to the SCSI mid layer, and unlike more
-straightforward SCSI drivers, disk i/o continues through the block
-side during the SCSI error recovery process, the cciss driver only
-implements the first two of these actions, aborting the command, and
-resetting the device. Additionally, most tape drives will not oblige
-in aborting commands, and sometimes it appears they will not even
-obey a reset command, though in most circumstances they will. In
-the case that the command cannot be aborted and the device cannot be
-reset, the device will be set offline.
-
-In the event the error handling code is triggered and a tape drive is
-successfully reset or the tardy command is successfully aborted, the
-tape drive may still not allow i/o to continue until some command
-is issued which positions the tape to a known position. Typically you
-must rewind the tape (by issuing "mt -f /dev/st0 rewind" for example)
-before i/o can proceed again to a tape drive which was reset.
-
-There is a cciss_tape_cmds module parameter which can be used to make cciss
-allocate more commands for use by tape drives. Ordinarily only a few commands
-(6) are allocated for tape drives because tape drives are slow and
-infrequently used and the primary purpose of Smart Array controllers is to
-act as a RAID controller for disk drives, so the vast majority of commands
-are allocated for disk devices. However, if you have more than a few tape
-drives attached to a smart array, the default number of commands may not be
-enough (for example, if you have 8 tape drives, you could only rewind 6
-at one time with the default number of commands.) The cciss_tape_cmds module
-parameter allows more commands (up to 16 more) to be allocated for use by
-tape drives. For example:
-
- insmod cciss.ko cciss_tape_cmds=16
-
-Or, as a kernel boot parameter passed in via grub: cciss.cciss_tape_cmds=8
diff --git a/Documentation/bt8xxgpio.txt b/Documentation/bt8xxgpio.txt
index d8297e4..a845feb 100644
--- a/Documentation/bt8xxgpio.txt
+++ b/Documentation/bt8xxgpio.txt
@@ -1,12 +1,8 @@
-===============================================================
-== BT8XXGPIO driver ==
-== ==
-== A driver for a selfmade cheap BT8xx based PCI GPIO-card ==
-== ==
-== For advanced documentation, see ==
-== http://www.bu3sch.de/btgpio.php ==
-===============================================================
+===================================================================
+A driver for a selfmade cheap BT8xx based PCI GPIO-card (bt8xxgpio)
+===================================================================
+For advanced documentation, see http://www.bu3sch.de/btgpio.php
A generic digital 24-port PCI GPIO card can be built out of an ordinary
Brooktree bt848, bt849, bt878 or bt879 based analog TV tuner card. The
@@ -17,9 +13,8 @@
These ports are accessible via 24 pins on the SMD chip package.
-==============================================
-== How to physically access the GPIO pins ==
-==============================================
+How to physically access the GPIO pins
+======================================
The are several ways to access these pins. One might unsolder the whole chip
and put it on a custom PCI board, or one might only unsolder each individual
@@ -27,7 +22,7 @@
there are some advanced soldering skills needed in any case.
The physical pinouts are drawn in the following ASCII art.
-The GPIO pins are marked with G00-G23
+The GPIO pins are marked with G00-G23::
G G G G G G G G G G G G G G G G G G
0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
diff --git a/Documentation/btmrvl.txt b/Documentation/btmrvl.txt
index 34916a4..ec57740 100644
--- a/Documentation/btmrvl.txt
+++ b/Documentation/btmrvl.txt
@@ -1,18 +1,16 @@
-=======================================================================
- README for btmrvl driver
-=======================================================================
-
+=============
+btmrvl driver
+=============
All commands are used via debugfs interface.
-=====================
-Set/get driver configurations:
+Set/get driver configurations
+=============================
Path: /debug/btmrvl/config/
-gpiogap=[n]
-hscfgcmd
- These commands are used to configure the host sleep parameters.
+gpiogap=[n], hscfgcmd
+ These commands are used to configure the host sleep parameters::
bit 8:0 -- Gap
bit 16:8 -- GPIO
@@ -23,7 +21,8 @@
where Gap is the gap in milli seconds between wakeup signal and
wakeup event, or 0xff for special host sleep setting.
- Usage:
+ Usage::
+
# Use SDIO interface to wake up the host and set GAP to 0x80:
echo 0xff80 > /debug/btmrvl/config/gpiogap
echo 1 > /debug/btmrvl/config/hscfgcmd
@@ -32,15 +31,16 @@
echo 0x03ff > /debug/btmrvl/config/gpiogap
echo 1 > /debug/btmrvl/config/hscfgcmd
-psmode=[n]
-pscmd
+psmode=[n], pscmd
These commands are used to enable/disable auto sleep mode
- where the option is:
+ where the option is::
+
1 -- Enable auto sleep mode
0 -- Disable auto sleep mode
- Usage:
+ Usage::
+
# Enable auto sleep mode
echo 1 > /debug/btmrvl/config/psmode
echo 1 > /debug/btmrvl/config/pscmd
@@ -50,15 +50,16 @@
echo 1 > /debug/btmrvl/config/pscmd
-hsmode=[n]
-hscmd
+hsmode=[n], hscmd
These commands are used to enable host sleep or wake up firmware
- where the option is:
+ where the option is::
+
1 -- Enable host sleep
0 -- Wake up firmware
- Usage:
+ Usage::
+
# Enable host sleep
echo 1 > /debug/btmrvl/config/hsmode
echo 1 > /debug/btmrvl/config/hscmd
@@ -68,12 +69,13 @@
echo 1 > /debug/btmrvl/config/hscmd
-======================
-Get driver status:
+Get driver status
+=================
Path: /debug/btmrvl/status/
-Usage:
+Usage::
+
cat /debug/btmrvl/status/<args>
where the args are:
@@ -90,14 +92,17 @@
txdnldrdy
This command displays the value of Tx download ready flag.
-
-=====================
+Issuing a raw hci command
+=========================
Use hcitool to issue raw hci command, refer to hcitool manual
- Usage: Hcitool cmd <ogf> <ocf> [Parameters]
+Usage::
- Interface Control Command
+ Hcitool cmd <ogf> <ocf> [Parameters]
+
+Interface Control Command::
+
hcitool cmd 0x3f 0x5b 0xf5 0x01 0x00 --Enable All interface
hcitool cmd 0x3f 0x5b 0xf5 0x01 0x01 --Enable Wlan interface
hcitool cmd 0x3f 0x5b 0xf5 0x01 0x02 --Enable BT interface
@@ -105,13 +110,13 @@
hcitool cmd 0x3f 0x5b 0xf5 0x00 0x01 --Disable Wlan interface
hcitool cmd 0x3f 0x5b 0xf5 0x00 0x02 --Disable BT interface
-=======================================================================
+SD8688 firmware
+===============
+Images:
-SD8688 firmware:
-
-/lib/firmware/sd8688_helper.bin
-/lib/firmware/sd8688.bin
+- /lib/firmware/sd8688_helper.bin
+- /lib/firmware/sd8688.bin
The images can be downloaded from:
diff --git a/Documentation/bus-virt-phys-mapping.txt b/Documentation/bus-virt-phys-mapping.txt
index 2bc55ff..4bb07c2 100644
--- a/Documentation/bus-virt-phys-mapping.txt
+++ b/Documentation/bus-virt-phys-mapping.txt
@@ -1,17 +1,27 @@
-[ NOTE: The virt_to_bus() and bus_to_virt() functions have been
+==========================================================
+How to access I/O mapped memory from within device drivers
+==========================================================
+
+:Author: Linus
+
+.. warning::
+
+ The virt_to_bus() and bus_to_virt() functions have been
superseded by the functionality provided by the PCI DMA interface
(see Documentation/DMA-API-HOWTO.txt). They continue
to be documented below for historical purposes, but new code
- must not use them. --davidm 00/12/12 ]
+ must not use them. --davidm 00/12/12
-[ This is a mail message in response to a query on IO mapping, thus the
- strange format for a "document" ]
+::
+
+ [ This is a mail message in response to a query on IO mapping, thus the
+ strange format for a "document" ]
The AHA-1542 is a bus-master device, and your patch makes the driver give the
controller the physical address of the buffers, which is correct on x86
(because all bus master devices see the physical memory mappings directly).
-However, on many setups, there are actually _three_ different ways of looking
+However, on many setups, there are actually **three** different ways of looking
at memory addresses, and in this case we actually want the third, the
so-called "bus address".
@@ -38,7 +48,7 @@
not generally necessarily true on other PCI/ISA setups.
Now, just as an example, on the PReP (PowerPC Reference Platform), the
-CPU sees a memory map something like this (this is from memory):
+CPU sees a memory map something like this (this is from memory)::
0-2 GB "real memory"
2 GB-3 GB "system IO" (inb/out and similar accesses on x86)
@@ -52,7 +62,7 @@
has to give the master address 0x80000000 as the memory address.
So, for example, depending on how the kernel is actually mapped on the
-PPC, you can end up with a setup like this:
+PPC, you can end up with a setup like this::
physical address: 0
virtual address: 0xC0000000
@@ -61,7 +71,7 @@
where all the addresses actually point to the same thing. It's just seen
through different translations..
-Similarly, on the Alpha, the normal translation is
+Similarly, on the Alpha, the normal translation is::
physical address: 0
virtual address: 0xfffffc0000000000
@@ -70,7 +80,7 @@
(but there are also Alphas where the physical address and the bus address
are the same).
-Anyway, the way to look up all these translations, you do
+Anyway, the way to look up all these translations, you do::
#include <asm/io.h>
@@ -81,8 +91,8 @@
Now, when do you need these?
-You want the _virtual_ address when you are actually going to access that
-pointer from the kernel. So you can have something like this:
+You want the **virtual** address when you are actually going to access that
+pointer from the kernel. So you can have something like this::
/*
* this is the hardware "mailbox" we use to communicate with
@@ -104,7 +114,7 @@
...
on the other hand, you want the bus address when you have a buffer that
-you want to give to the controller:
+you want to give to the controller::
/* ask the controller to read the sense status into "sense_buffer" */
mbox.bufstart = virt_to_bus(&sense_buffer);
@@ -112,7 +122,7 @@
mbox.status = 0;
notify_controller(&mbox);
-And you generally _never_ want to use the physical address, because you can't
+And you generally **never** want to use the physical address, because you can't
use that from the CPU (the CPU only uses translated virtual addresses), and
you can't use it from the bus master.
@@ -124,8 +134,10 @@
management layer doesn't know about devices outside the CPU, so it
shouldn't need to know about "bus addresses" etc).
-NOTE NOTE NOTE! The above is only one part of the whole equation. The above
-only talks about "real memory", that is, CPU memory (RAM).
+.. note::
+
+ The above is only one part of the whole equation. The above
+ only talks about "real memory", that is, CPU memory (RAM).
There is a completely different type of memory too, and that's the "shared
memory" on the PCI or ISA bus. That's generally not RAM (although in the case
@@ -137,20 +149,22 @@
related functions. You should never take the address of such memory, because
there is really nothing you can do with such an address: it's not
conceptually in the same memory space as "real memory" at all, so you cannot
-just dereference a pointer. (Sadly, on x86 it _is_ in the same memory space,
+just dereference a pointer. (Sadly, on x86 it **is** in the same memory space,
so on x86 it actually works to just deference a pointer, but it's not
portable).
-For such memory, you can do things like
+For such memory, you can do things like:
- - reading:
+ - reading::
+
/*
* read first 32 bits from ISA memory at 0xC0000, aka
* C000:0000 in DOS terms
*/
unsigned int signature = isa_readl(0xC0000);
- - remapping and writing:
+ - remapping and writing::
+
/*
* remap framebuffer PCI memory area at 0xFC000000,
* size 1MB, so that we can access it: We can directly
@@ -165,7 +179,8 @@
/* unmap when we unload the driver */
iounmap(baseptr);
- - copying and clearing:
+ - copying and clearing::
+
/* get the 6-byte Ethernet address at ISA address E000:0040 */
memcpy_fromio(kernel_buffer, 0xE0040, 6);
/* write a packet to the driver */
@@ -181,10 +196,10 @@
Note that kernel versions 2.0.x (and earlier) mistakenly called the
ioremap() function "vremap()". ioremap() is the proper name, but I
didn't think straight when I wrote it originally. People who have to
-support both can do something like:
+support both can do something like::
/* support old naming silliness */
- #if LINUX_VERSION_CODE < 0x020100
+ #if LINUX_VERSION_CODE < 0x020100
#define ioremap vremap
#define iounmap vfree
#endif
@@ -196,13 +211,10 @@
don't do all that complex things (or rather: the complexity is not so
much in the actual IO accesses as in error handling and timeouts etc).
It's generally not hard to fix drivers, and in many cases the code
-actually looks better afterwards:
+actually looks better afterwards::
unsigned long signature = *(unsigned int *) 0xC0000;
vs
unsigned long signature = readl(0xC0000);
I think the second version actually is more readable, no?
-
- Linus
-
diff --git a/Documentation/cachetlb.txt b/Documentation/cachetlb.txt
index 3f9f808..6eb9d3f 100644
--- a/Documentation/cachetlb.txt
+++ b/Documentation/cachetlb.txt
@@ -1,7 +1,8 @@
- Cache and TLB Flushing
- Under Linux
+==================================
+Cache and TLB Flushing Under Linux
+==================================
- David S. Miller <davem@redhat.com>
+:Author: David S. Miller <davem@redhat.com>
This document describes the cache/tlb flushing interfaces called
by the Linux VM subsystem. It enumerates over each interface,
@@ -28,7 +29,7 @@
invoke one of the following flush methods _after_ the page table
changes occur:
-1) void flush_tlb_all(void)
+1) ``void flush_tlb_all(void)``
The most severe flush of all. After this interface runs,
any previous page table modification whatsoever will be
@@ -37,7 +38,7 @@
This is usually invoked when the kernel page tables are
changed, since such translations are "global" in nature.
-2) void flush_tlb_mm(struct mm_struct *mm)
+2) ``void flush_tlb_mm(struct mm_struct *mm)``
This interface flushes an entire user address space from
the TLB. After running, this interface must make sure that
@@ -49,8 +50,8 @@
page table operations such as what happens during
fork, and exec.
-3) void flush_tlb_range(struct vm_area_struct *vma,
- unsigned long start, unsigned long end)
+3) ``void flush_tlb_range(struct vm_area_struct *vma,
+ unsigned long start, unsigned long end)``
Here we are flushing a specific range of (user) virtual
address translations from the TLB. After running, this
@@ -69,7 +70,7 @@
call flush_tlb_page (see below) for each entry which may be
modified.
-4) void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
+4) ``void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)``
This time we need to remove the PAGE_SIZE sized translation
from the TLB. The 'vma' is the backing structure used by
@@ -87,8 +88,8 @@
This is used primarily during fault processing.
-5) void update_mmu_cache(struct vm_area_struct *vma,
- unsigned long address, pte_t *ptep)
+5) ``void update_mmu_cache(struct vm_area_struct *vma,
+ unsigned long address, pte_t *ptep)``
At the end of every page fault, this routine is invoked to
tell the architecture specific code that a translation
@@ -100,7 +101,7 @@
translations for software managed TLB configurations.
The sparc64 port currently does this.
-6) void tlb_migrate_finish(struct mm_struct *mm)
+6) ``void tlb_migrate_finish(struct mm_struct *mm)``
This interface is called at the end of an explicit
process migration. This interface provides a hook
@@ -112,7 +113,7 @@
Next, we have the cache flushing interfaces. In general, when Linux
is changing an existing virtual-->physical mapping to a new value,
-the sequence will be in one of the following forms:
+the sequence will be in one of the following forms::
1) flush_cache_mm(mm);
change_all_page_tables_of(mm);
@@ -143,7 +144,7 @@
Here are the routines, one by one:
-1) void flush_cache_mm(struct mm_struct *mm)
+1) ``void flush_cache_mm(struct mm_struct *mm)``
This interface flushes an entire user address space from
the caches. That is, after running, there will be no cache
@@ -152,7 +153,7 @@
This interface is used to handle whole address space
page table operations such as what happens during exit and exec.
-2) void flush_cache_dup_mm(struct mm_struct *mm)
+2) ``void flush_cache_dup_mm(struct mm_struct *mm)``
This interface flushes an entire user address space from
the caches. That is, after running, there will be no cache
@@ -164,8 +165,8 @@
This option is separate from flush_cache_mm to allow some
optimizations for VIPT caches.
-3) void flush_cache_range(struct vm_area_struct *vma,
- unsigned long start, unsigned long end)
+3) ``void flush_cache_range(struct vm_area_struct *vma,
+ unsigned long start, unsigned long end)``
Here we are flushing a specific range of (user) virtual
addresses from the cache. After running, there will be no
@@ -181,7 +182,7 @@
call flush_cache_page (see below) for each entry which may be
modified.
-4) void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn)
+4) ``void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn)``
This time we need to remove a PAGE_SIZE sized range
from the cache. The 'vma' is the backing structure used by
@@ -202,7 +203,7 @@
This is used primarily during fault processing.
-5) void flush_cache_kmaps(void)
+5) ``void flush_cache_kmaps(void)``
This routine need only be implemented if the platform utilizes
highmem. It will be called right before all of the kmaps
@@ -214,8 +215,8 @@
This routing should be implemented in asm/highmem.h
-6) void flush_cache_vmap(unsigned long start, unsigned long end)
- void flush_cache_vunmap(unsigned long start, unsigned long end)
+6) ``void flush_cache_vmap(unsigned long start, unsigned long end)``
+ ``void flush_cache_vunmap(unsigned long start, unsigned long end)``
Here in these two interfaces we are flushing a specific range
of (kernel) virtual addresses from the cache. After running,
@@ -243,8 +244,10 @@
processes to mmap shared memory at address which are a multiple of
this value.
-NOTE: This does not fix shared mmaps, check out the sparc64 port for
-one way to solve this (in particular SPARC_FLAG_MMAPSHARED).
+.. note::
+
+ This does not fix shared mmaps, check out the sparc64 port for
+ one way to solve this (in particular SPARC_FLAG_MMAPSHARED).
Next, you have to solve the D-cache aliasing issue for all
other cases. Please keep in mind that fact that, for a given page
@@ -255,8 +258,8 @@
aliasing problem has the potential to exist since the kernel already
maps this page at its virtual address.
- void copy_user_page(void *to, void *from, unsigned long addr, struct page *page)
- void clear_user_page(void *to, unsigned long addr, struct page *page)
+ ``void copy_user_page(void *to, void *from, unsigned long addr, struct page *page)``
+ ``void clear_user_page(void *to, unsigned long addr, struct page *page)``
These two routines store data in user anonymous or COW
pages. It allows a port to efficiently avoid D-cache alias
@@ -276,14 +279,16 @@
If D-cache aliasing is not an issue, these two routines may
simply call memcpy/memset directly and do nothing more.
- void flush_dcache_page(struct page *page)
+ ``void flush_dcache_page(struct page *page)``
Any time the kernel writes to a page cache page, _OR_
the kernel is about to read from a page cache page and
user space shared/writable mappings of this page potentially
exist, this routine is called.
- NOTE: This routine need only be called for page cache pages
+ .. note::
+
+ This routine need only be called for page cache pages
which can potentially ever be mapped into the address
space of a user process. So for example, VFS layer code
handling vfs symlinks in the page cache need not call
@@ -322,18 +327,19 @@
made of this flag bit, and if set the flush is done and the flag
bit is cleared.
- IMPORTANT NOTE: It is often important, if you defer the flush,
+ .. important::
+
+ It is often important, if you defer the flush,
that the actual flush occurs on the same CPU
as did the cpu stores into the page to make it
dirty. Again, see sparc64 for examples of how
to deal with this.
- void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
- unsigned long user_vaddr,
- void *dst, void *src, int len)
- void copy_from_user_page(struct vm_area_struct *vma, struct page *page,
- unsigned long user_vaddr,
- void *dst, void *src, int len)
+ ``void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
+ unsigned long user_vaddr, void *dst, void *src, int len)``
+ ``void copy_from_user_page(struct vm_area_struct *vma, struct page *page,
+ unsigned long user_vaddr, void *dst, void *src, int len)``
+
When the kernel needs to copy arbitrary data in and out
of arbitrary user pages (f.e. for ptrace()) it will use
these two routines.
@@ -344,8 +350,9 @@
likely that you will need to flush the instruction cache
for copy_to_user_page().
- void flush_anon_page(struct vm_area_struct *vma, struct page *page,
- unsigned long vmaddr)
+ ``void flush_anon_page(struct vm_area_struct *vma, struct page *page,
+ unsigned long vmaddr)``
+
When the kernel needs to access the contents of an anonymous
page, it calls this function (currently only
get_user_pages()). Note: flush_dcache_page() deliberately
@@ -354,7 +361,8 @@
architectures). For incoherent architectures, it should flush
the cache of the page at vmaddr.
- void flush_kernel_dcache_page(struct page *page)
+ ``void flush_kernel_dcache_page(struct page *page)``
+
When the kernel needs to modify a user page is has obtained
with kmap, it calls this function after all modifications are
complete (but before kunmapping it) to bring the underlying
@@ -366,14 +374,16 @@
the kernel cache for page (using page_address(page)).
- void flush_icache_range(unsigned long start, unsigned long end)
+ ``void flush_icache_range(unsigned long start, unsigned long end)``
+
When the kernel stores into addresses that it will execute
out of (eg when loading modules), this function is called.
If the icache does not snoop stores then this routine will need
to flush it.
- void flush_icache_page(struct vm_area_struct *vma, struct page *page)
+ ``void flush_icache_page(struct vm_area_struct *vma, struct page *page)``
+
All the functionality of flush_icache_page can be implemented in
flush_dcache_page and update_mmu_cache. In the future, the hope
is to remove this interface completely.
@@ -387,7 +397,8 @@
coherency. It must do this by flushing the vmap range before doing
I/O and invalidating it after the I/O returns.
- void flush_kernel_vmap_range(void *vaddr, int size)
+ ``void flush_kernel_vmap_range(void *vaddr, int size)``
+
flushes the kernel cache for a given virtual address range in
the vmap area. This is to make sure that any data the kernel
modified in the vmap range is made visible to the physical
@@ -395,7 +406,8 @@
Note that this API does *not* also flush the offset map alias
of the area.
- void invalidate_kernel_vmap_range(void *vaddr, int size) invalidates
+ ``void invalidate_kernel_vmap_range(void *vaddr, int size) invalidates``
+
the cache for a given virtual address range in the vmap area
which prevents the processor from making the cache stale by
speculatively reading data while the I/O was occurring to the
diff --git a/Documentation/cgroup-v2.txt b/Documentation/cgroup-v2.txt
index e610197..bde1771 100644
--- a/Documentation/cgroup-v2.txt
+++ b/Documentation/cgroup-v2.txt
@@ -1,7 +1,9 @@
-
+================
Control Group v2
+================
-October, 2015 Tejun Heo <tj@kernel.org>
+:Date: October, 2015
+:Author: Tejun Heo <tj@kernel.org>
This is the authoritative documentation on the design, interface and
conventions of cgroup v2. It describes all userland-visible aspects
@@ -9,70 +11,72 @@
future changes must be reflected in this document. Documentation for
v1 is available under Documentation/cgroup-v1/.
-CONTENTS
+.. CONTENTS
-1. Introduction
- 1-1. Terminology
- 1-2. What is cgroup?
-2. Basic Operations
- 2-1. Mounting
- 2-2. Organizing Processes
- 2-3. [Un]populated Notification
- 2-4. Controlling Controllers
- 2-4-1. Enabling and Disabling
- 2-4-2. Top-down Constraint
- 2-4-3. No Internal Process Constraint
- 2-5. Delegation
- 2-5-1. Model of Delegation
- 2-5-2. Delegation Containment
- 2-6. Guidelines
- 2-6-1. Organize Once and Control
- 2-6-2. Avoid Name Collisions
-3. Resource Distribution Models
- 3-1. Weights
- 3-2. Limits
- 3-3. Protections
- 3-4. Allocations
-4. Interface Files
- 4-1. Format
- 4-2. Conventions
- 4-3. Core Interface Files
-5. Controllers
- 5-1. CPU
- 5-1-1. CPU Interface Files
- 5-2. Memory
- 5-2-1. Memory Interface Files
- 5-2-2. Usage Guidelines
- 5-2-3. Memory Ownership
- 5-3. IO
- 5-3-1. IO Interface Files
- 5-3-2. Writeback
- 5-4. PID
- 5-4-1. PID Interface Files
- 5-5. RDMA
- 5-5-1. RDMA Interface Files
- 5-6. Misc
- 5-6-1. perf_event
-6. Namespace
- 6-1. Basics
- 6-2. The Root and Views
- 6-3. Migration and setns(2)
- 6-4. Interaction with Other Namespaces
-P. Information on Kernel Programming
- P-1. Filesystem Support for Writeback
-D. Deprecated v1 Core Features
-R. Issues with v1 and Rationales for v2
- R-1. Multiple Hierarchies
- R-2. Thread Granularity
- R-3. Competition Between Inner Nodes and Threads
- R-4. Other Interface Issues
- R-5. Controller Issues and Remedies
- R-5-1. Memory
+ 1. Introduction
+ 1-1. Terminology
+ 1-2. What is cgroup?
+ 2. Basic Operations
+ 2-1. Mounting
+ 2-2. Organizing Processes
+ 2-3. [Un]populated Notification
+ 2-4. Controlling Controllers
+ 2-4-1. Enabling and Disabling
+ 2-4-2. Top-down Constraint
+ 2-4-3. No Internal Process Constraint
+ 2-5. Delegation
+ 2-5-1. Model of Delegation
+ 2-5-2. Delegation Containment
+ 2-6. Guidelines
+ 2-6-1. Organize Once and Control
+ 2-6-2. Avoid Name Collisions
+ 3. Resource Distribution Models
+ 3-1. Weights
+ 3-2. Limits
+ 3-3. Protections
+ 3-4. Allocations
+ 4. Interface Files
+ 4-1. Format
+ 4-2. Conventions
+ 4-3. Core Interface Files
+ 5. Controllers
+ 5-1. CPU
+ 5-1-1. CPU Interface Files
+ 5-2. Memory
+ 5-2-1. Memory Interface Files
+ 5-2-2. Usage Guidelines
+ 5-2-3. Memory Ownership
+ 5-3. IO
+ 5-3-1. IO Interface Files
+ 5-3-2. Writeback
+ 5-4. PID
+ 5-4-1. PID Interface Files
+ 5-5. RDMA
+ 5-5-1. RDMA Interface Files
+ 5-6. Misc
+ 5-6-1. perf_event
+ 6. Namespace
+ 6-1. Basics
+ 6-2. The Root and Views
+ 6-3. Migration and setns(2)
+ 6-4. Interaction with Other Namespaces
+ P. Information on Kernel Programming
+ P-1. Filesystem Support for Writeback
+ D. Deprecated v1 Core Features
+ R. Issues with v1 and Rationales for v2
+ R-1. Multiple Hierarchies
+ R-2. Thread Granularity
+ R-3. Competition Between Inner Nodes and Threads
+ R-4. Other Interface Issues
+ R-5. Controller Issues and Remedies
+ R-5-1. Memory
-1. Introduction
+Introduction
+============
-1-1. Terminology
+Terminology
+-----------
"cgroup" stands for "control group" and is never capitalized. The
singular form is used to designate the whole feature and also as a
@@ -80,7 +84,8 @@
multiple individual control groups, the plural form "cgroups" is used.
-1-2. What is cgroup?
+What is cgroup?
+---------------
cgroup is a mechanism to organize processes hierarchically and
distribute system resources along the hierarchy in a controlled and
@@ -110,12 +115,14 @@
overridden from further away.
-2. Basic Operations
+Basic Operations
+================
-2-1. Mounting
+Mounting
+--------
Unlike v1, cgroup v2 has only single hierarchy. The cgroup v2
-hierarchy can be mounted with the following mount command.
+hierarchy can be mounted with the following mount command::
# mount -t cgroup2 none $MOUNT_POINT
@@ -160,10 +167,11 @@
Delegation section for details.
-2-2. Organizing Processes
+Organizing Processes
+--------------------
Initially, only the root cgroup exists to which all processes belong.
-A child cgroup can be created by creating a sub-directory.
+A child cgroup can be created by creating a sub-directory::
# mkdir $CGROUP_NAME
@@ -190,28 +198,29 @@
A cgroup which doesn't have any children or live processes can be
destroyed by removing the directory. Note that a cgroup which doesn't
have any children and is associated only with zombie processes is
-considered empty and can be removed.
+considered empty and can be removed::
# rmdir $CGROUP_NAME
"/proc/$PID/cgroup" lists a process's cgroup membership. If legacy
cgroup is in use in the system, this file may contain multiple lines,
one for each hierarchy. The entry for cgroup v2 is always in the
-format "0::$PATH".
+format "0::$PATH"::
# cat /proc/842/cgroup
...
0::/test-cgroup/test-cgroup-nested
If the process becomes a zombie and the cgroup it was associated with
-is removed subsequently, " (deleted)" is appended to the path.
+is removed subsequently, " (deleted)" is appended to the path::
# cat /proc/842/cgroup
...
0::/test-cgroup/test-cgroup-nested (deleted)
-2-3. [Un]populated Notification
+[Un]populated Notification
+--------------------------
Each non-root cgroup has a "cgroup.events" file which contains
"populated" field indicating whether the cgroup's sub-hierarchy has
@@ -222,7 +231,7 @@
sub-hierarchy have exited. The populated state updates and
notifications are recursive. Consider the following sub-hierarchy
where the numbers in the parentheses represent the numbers of processes
-in each cgroup.
+in each cgroup::
A(4) - B(0) - C(1)
\ D(0)
@@ -233,18 +242,20 @@
both cgroups.
-2-4. Controlling Controllers
+Controlling Controllers
+-----------------------
-2-4-1. Enabling and Disabling
+Enabling and Disabling
+~~~~~~~~~~~~~~~~~~~~~~
Each cgroup has a "cgroup.controllers" file which lists all
-controllers available for the cgroup to enable.
+controllers available for the cgroup to enable::
# cat cgroup.controllers
cpu io memory
No controller is enabled by default. Controllers can be enabled and
-disabled by writing to the "cgroup.subtree_control" file.
+disabled by writing to the "cgroup.subtree_control" file::
# echo "+cpu +memory -io" > cgroup.subtree_control
@@ -256,7 +267,7 @@
Enabling a controller in a cgroup indicates that the distribution of
the target resource across its immediate children will be controlled.
Consider the following sub-hierarchy. The enabled controllers are
-listed in parentheses.
+listed in parentheses::
A(cpu,memory) - B(memory) - C()
\ D()
@@ -276,7 +287,8 @@
"cgroup." are owned by the parent rather than the cgroup itself.
-2-4-2. Top-down Constraint
+Top-down Constraint
+~~~~~~~~~~~~~~~~~~~
Resources are distributed top-down and a cgroup can further distribute
a resource only if the resource has been distributed to it from the
@@ -287,7 +299,8 @@
disabled if one or more children have it enabled.
-2-4-3. No Internal Process Constraint
+No Internal Process Constraint
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Non-root cgroups can only distribute resources to their children when
they don't have any processes of their own. In other words, only
@@ -314,9 +327,11 @@
file.
-2-5. Delegation
+Delegation
+----------
-2-5-1. Model of Delegation
+Model of Delegation
+~~~~~~~~~~~~~~~~~~~
A cgroup can be delegated in two ways. First, to a less privileged
user by granting write access of the directory and its "cgroup.procs"
@@ -345,7 +360,8 @@
this may be limited explicitly in the future.
-2-5-2. Delegation Containment
+Delegation Containment
+~~~~~~~~~~~~~~~~~~~~~~
A delegated sub-hierarchy is contained in the sense that processes
can't be moved into or out of the sub-hierarchy by the delegatee.
@@ -366,7 +382,7 @@
For an example, let's assume cgroups C0 and C1 have been delegated to
user U0 who created C00, C01 under C0 and C10 under C1 as follows and
-all processes under C0 and C1 belong to U0.
+all processes under C0 and C1 belong to U0::
~~~~~~~~~~~~~ - C0 - C00
~ cgroup ~ \ C01
@@ -386,9 +402,11 @@
is not reachable, the migration is rejected with -ENOENT.
-2-6. Guidelines
+Guidelines
+----------
-2-6-1. Organize Once and Control
+Organize Once and Control
+~~~~~~~~~~~~~~~~~~~~~~~~~
Migrating a process across cgroups is a relatively expensive operation
and stateful resources such as memory are not moved together with the
@@ -404,7 +422,8 @@
the interface files.
-2-6-2. Avoid Name Collisions
+Avoid Name Collisions
+~~~~~~~~~~~~~~~~~~~~~
Interface files for a cgroup and its children cgroups occupy the same
directory and it is possible to create children cgroups which collide
@@ -422,14 +441,16 @@
user's responsibility to avoid them.
-3. Resource Distribution Models
+Resource Distribution Models
+============================
cgroup controllers implement several resource distribution schemes
depending on the resource type and expected use cases. This section
describes major schemes in use along with their expected behaviors.
-3-1. Weights
+Weights
+-------
A parent's resource is distributed by adding up the weights of all
active children and giving each the fraction matching the ratio of its
@@ -450,7 +471,8 @@
and is an example of this type.
-3-2. Limits
+Limits
+------
A child can only consume upto the configured amount of the resource.
Limits can be over-committed - the sum of the limits of children can
@@ -466,7 +488,8 @@
on an IO device and is an example of this type.
-3-3. Protections
+Protections
+-----------
A cgroup is protected to be allocated upto the configured amount of
the resource if the usages of all its ancestors are under their
@@ -486,7 +509,8 @@
example of this type.
-3-4. Allocations
+Allocations
+-----------
A cgroup is exclusively allocated a certain amount of a finite
resource. Allocations can't be over-committed - the sum of the
@@ -505,12 +529,14 @@
type.
-4. Interface Files
+Interface Files
+===============
-4-1. Format
+Format
+------
All interface files should be in one of the following formats whenever
-possible.
+possible::
New-line separated values
(when only one value can be written at once)
@@ -545,7 +571,8 @@
may be specified in any order and not all pairs have to be specified.
-4-2. Conventions
+Conventions
+-----------
- Settings for a single feature should be contained in a single file.
@@ -581,25 +608,25 @@
with "default" as the value must not appear when read.
For example, a setting which is keyed by major:minor device numbers
- with integer values may look like the following.
+ with integer values may look like the following::
# cat cgroup-example-interface-file
default 150
8:0 300
- The default value can be updated by
+ The default value can be updated by::
# echo 125 > cgroup-example-interface-file
- or
+ or::
# echo "default 125" > cgroup-example-interface-file
- An override can be set by
+ An override can be set by::
# echo "8:16 170" > cgroup-example-interface-file
- and cleared by
+ and cleared by::
# echo "8:0 default" > cgroup-example-interface-file
# cat cgroup-example-interface-file
@@ -612,12 +639,12 @@
generated on the file.
-4-3. Core Interface Files
+Core Interface Files
+--------------------
All cgroup core files are prefixed with "cgroup."
cgroup.procs
-
A read-write new-line separated values file which exists on
all cgroups.
@@ -643,7 +670,6 @@
should be granted along with the containing directory.
cgroup.controllers
-
A read-only space separated values file which exists on all
cgroups.
@@ -651,7 +677,6 @@
the cgroup. The controllers are not ordered.
cgroup.subtree_control
-
A read-write space separated values file which exists on all
cgroups. Starts out empty.
@@ -667,23 +692,25 @@
operations are specified, either all succeed or all fail.
cgroup.events
-
A read-only flat-keyed file which exists on non-root cgroups.
The following entries are defined. Unless specified
otherwise, a value change in this file generates a file
modified event.
populated
-
1 if the cgroup or its descendants contains any live
processes; otherwise, 0.
-5. Controllers
+Controllers
+===========
-5-1. CPU
+CPU
+---
-[NOTE: The interface for the cpu controller hasn't been merged yet]
+.. note::
+
+ The interface for the cpu controller hasn't been merged yet
The "cpu" controllers regulates distribution of CPU cycles. This
controller implements weight and absolute bandwidth limit models for
@@ -691,36 +718,34 @@
realtime scheduling policy.
-5-1-1. CPU Interface Files
+CPU Interface Files
+~~~~~~~~~~~~~~~~~~~
All time durations are in microseconds.
cpu.stat
-
A read-only flat-keyed file which exists on non-root cgroups.
- It reports the following six stats.
+ It reports the following six stats:
- usage_usec
- user_usec
- system_usec
- nr_periods
- nr_throttled
- throttled_usec
+ - usage_usec
+ - user_usec
+ - system_usec
+ - nr_periods
+ - nr_throttled
+ - throttled_usec
cpu.weight
-
A read-write single value file which exists on non-root
cgroups. The default is "100".
The weight in the range [1, 10000].
cpu.max
-
A read-write two value file which exists on non-root cgroups.
The default is "max 100000".
- The maximum bandwidth limit. It's in the following format.
+ The maximum bandwidth limit. It's in the following format::
$MAX $PERIOD
@@ -729,9 +754,10 @@
one number is written, $MAX is updated.
cpu.rt.max
+ .. note::
- [NOTE: The semantics of this file is still under discussion and the
- interface hasn't been merged yet]
+ The semantics of this file is still under discussion and the
+ interface hasn't been merged yet
A read-write two value file which exists on all cgroups.
The default is "0 100000".
@@ -739,7 +765,7 @@
The maximum realtime runtime allocation. Over-committing
configurations are disallowed and process migrations are
rejected if not enough bandwidth is available. It's in the
- following format.
+ following format::
$MAX $PERIOD
@@ -748,7 +774,8 @@
updated.
-5-2. Memory
+Memory
+------
The "memory" controller regulates distribution of memory. Memory is
stateful and implements both limit and protection models. Due to the
@@ -770,14 +797,14 @@
The above list may expand in the future for better coverage.
-5-2-1. Memory Interface Files
+Memory Interface Files
+~~~~~~~~~~~~~~~~~~~~~~
All memory amounts are in bytes. If a value which is not aligned to
PAGE_SIZE is written, the value may be rounded up to the closest
PAGE_SIZE multiple when read back.
memory.current
-
A read-only single value file which exists on non-root
cgroups.
@@ -785,7 +812,6 @@
and its descendants.
memory.low
-
A read-write single value file which exists on non-root
cgroups. The default is "0".
@@ -798,7 +824,6 @@
protection is discouraged.
memory.high
-
A read-write single value file which exists on non-root
cgroups. The default is "max".
@@ -811,7 +836,6 @@
under extreme conditions the limit may be breached.
memory.max
-
A read-write single value file which exists on non-root
cgroups. The default is "max".
@@ -826,21 +850,18 @@
utility is limited to providing the final safety net.
memory.events
-
A read-only flat-keyed file which exists on non-root cgroups.
The following entries are defined. Unless specified
otherwise, a value change in this file generates a file
modified event.
low
-
The number of times the cgroup is reclaimed due to
high memory pressure even though its usage is under
the low boundary. This usually indicates that the low
boundary is over-committed.
high
-
The number of times processes of the cgroup are
throttled and routed to perform direct memory reclaim
because the high memory boundary was exceeded. For a
@@ -849,13 +870,11 @@
occurrences are expected.
max
-
The number of times the cgroup's memory usage was
about to go over the max boundary. If direct reclaim
fails to bring it down, the cgroup goes to OOM state.
oom
-
The number of time the cgroup's memory usage was
reached the limit and allocation was about to fail.
@@ -864,16 +883,14 @@
Failed allocation in its turn could be returned into
userspace as -ENOMEM or siletly ignored in cases like
- disk readahead. For now OOM in memory cgroup kills
+ disk readahead. For now OOM in memory cgroup kills
tasks iff shortage has happened inside page fault.
oom_kill
-
The number of processes belonging to this cgroup
killed by any kind of OOM killer.
memory.stat
-
A read-only flat-keyed file which exists on non-root cgroups.
This breaks down the cgroup's memory footprint into different
@@ -887,73 +904,55 @@
fixed position; use the keys to look up specific values!
anon
-
Amount of memory used in anonymous mappings such as
brk(), sbrk(), and mmap(MAP_ANONYMOUS)
file
-
Amount of memory used to cache filesystem data,
including tmpfs and shared memory.
kernel_stack
-
Amount of memory allocated to kernel stacks.
slab
-
Amount of memory used for storing in-kernel data
structures.
sock
-
Amount of memory used in network transmission buffers
shmem
-
Amount of cached filesystem data that is swap-backed,
such as tmpfs, shm segments, shared anonymous mmap()s
file_mapped
-
Amount of cached filesystem data mapped with mmap()
file_dirty
-
Amount of cached filesystem data that was modified but
not yet written back to disk
file_writeback
-
Amount of cached filesystem data that was modified and
is currently being written back to disk
- inactive_anon
- active_anon
- inactive_file
- active_file
- unevictable
-
+ inactive_anon, active_anon, inactive_file, active_file, unevictable
Amount of memory, swap-backed and filesystem-backed,
on the internal memory management lists used by the
page reclaim algorithm
slab_reclaimable
-
Part of "slab" that might be reclaimed, such as
dentries and inodes.
slab_unreclaimable
-
Part of "slab" that cannot be reclaimed on memory
pressure.
pgfault
-
Total number of page faults incurred
pgmajfault
-
Number of major page faults incurred
workingset_refault
@@ -997,7 +996,6 @@
Amount of reclaimed lazyfree pages
memory.swap.current
-
A read-only single value file which exists on non-root
cgroups.
@@ -1005,7 +1003,6 @@
and its descendants.
memory.swap.max
-
A read-write single value file which exists on non-root
cgroups. The default is "max".
@@ -1013,7 +1010,8 @@
limit, anonymous meomry of the cgroup will not be swapped out.
-5-2-2. Usage Guidelines
+Usage Guidelines
+~~~~~~~~~~~~~~~~
"memory.high" is the main mechanism to control memory usage.
Over-committing on high limit (sum of high limits > available memory)
@@ -1036,7 +1034,8 @@
implemented yet.
-5-2-3. Memory Ownership
+Memory Ownership
+~~~~~~~~~~~~~~~~
A memory area is charged to the cgroup which instantiated it and stays
charged to the cgroup until the area is released. Migrating a process
@@ -1054,7 +1053,8 @@
belonging to the affected files to ensure correct memory ownership.
-5-3. IO
+IO
+--
The "io" controller regulates the distribution of IO resources. This
controller implements both weight based and absolute bandwidth or IOPS
@@ -1063,28 +1063,29 @@
blk-mq devices.
-5-3-1. IO Interface Files
+IO Interface Files
+~~~~~~~~~~~~~~~~~~
io.stat
-
A read-only nested-keyed file which exists on non-root
cgroups.
Lines are keyed by $MAJ:$MIN device numbers and not ordered.
The following nested keys are defined.
+ ====== ===================
rbytes Bytes read
wbytes Bytes written
rios Number of read IOs
wios Number of write IOs
+ ====== ===================
- An example read output follows.
+ An example read output follows:
8:16 rbytes=1459200 wbytes=314773504 rios=192 wios=353
8:0 rbytes=90430464 wbytes=299008000 rios=8950 wios=1252
io.weight
-
A read-write flat-keyed file which exists on non-root cgroups.
The default is "default 100".
@@ -1098,14 +1099,13 @@
$WEIGHT" or simply "$WEIGHT". Overrides can be set by writing
"$MAJ:$MIN $WEIGHT" and unset by writing "$MAJ:$MIN default".
- An example read output follows.
+ An example read output follows::
default 100
8:16 200
8:0 50
io.max
-
A read-write nested-keyed file which exists on non-root
cgroups.
@@ -1113,10 +1113,12 @@
device numbers and not ordered. The following nested keys are
defined.
+ ===== ==================================
rbps Max read bytes per second
wbps Max write bytes per second
riops Max read IO operations per second
wiops Max write IO operations per second
+ ===== ==================================
When writing, any number of nested key-value pairs can be
specified in any order. "max" can be specified as the value
@@ -1126,24 +1128,25 @@
BPS and IOPS are measured in each IO direction and IOs are
delayed if limit is reached. Temporary bursts are allowed.
- Setting read limit at 2M BPS and write at 120 IOPS for 8:16.
+ Setting read limit at 2M BPS and write at 120 IOPS for 8:16::
echo "8:16 rbps=2097152 wiops=120" > io.max
- Reading returns the following.
+ Reading returns the following::
8:16 rbps=2097152 wbps=max riops=max wiops=120
- Write IOPS limit can be removed by writing the following.
+ Write IOPS limit can be removed by writing the following::
echo "8:16 wiops=max" > io.max
- Reading now returns the following.
+ Reading now returns the following::
8:16 rbps=2097152 wbps=max riops=max wiops=max
-5-3-2. Writeback
+Writeback
+~~~~~~~~~
Page cache is dirtied through buffered writes and shared mmaps and
written asynchronously to the backing filesystem by the writeback
@@ -1191,22 +1194,19 @@
The sysctl knobs which affect writeback behavior are applied to cgroup
writeback as follows.
- vm.dirty_background_ratio
- vm.dirty_ratio
-
+ vm.dirty_background_ratio, vm.dirty_ratio
These ratios apply the same to cgroup writeback with the
amount of available memory capped by limits imposed by the
memory controller and system-wide clean memory.
- vm.dirty_background_bytes
- vm.dirty_bytes
-
+ vm.dirty_background_bytes, vm.dirty_bytes
For cgroup writeback, this is calculated into ratio against
total available memory and applied the same way as
vm.dirty[_background]_ratio.
-5-4. PID
+PID
+---
The process number controller is used to allow a cgroup to stop any
new tasks from being fork()'d or clone()'d after a specified limit is
@@ -1221,17 +1221,16 @@
used by the kernel.
-5-4-1. PID Interface Files
+PID Interface Files
+~~~~~~~~~~~~~~~~~~~
pids.max
-
A read-write single value file which exists on non-root
cgroups. The default is "max".
Hard limit of number of processes.
pids.current
-
A read-only single value file which exists on all cgroups.
The number of processes currently in the cgroup and its
@@ -1246,12 +1245,14 @@
of a new process would cause a cgroup policy to be violated.
-5-5. RDMA
+RDMA
+----
The "rdma" controller regulates the distribution and accounting of
of RDMA resources.
-5-5-1. RDMA Interface Files
+RDMA Interface Files
+~~~~~~~~~~~~~~~~~~~~
rdma.max
A readwrite nested-keyed file that exists for all the cgroups
@@ -1264,10 +1265,12 @@
The following nested keys are defined.
+ ========== =============================
hca_handle Maximum number of HCA Handles
hca_object Maximum number of HCA Objects
+ ========== =============================
- An example for mlx4 and ocrdma device follows.
+ An example for mlx4 and ocrdma device follows::
mlx4_0 hca_handle=2 hca_object=2000
ocrdma1 hca_handle=3 hca_object=max
@@ -1276,15 +1279,17 @@
A read-only file that describes current resource usage.
It exists for all the cgroup except root.
- An example for mlx4 and ocrdma device follows.
+ An example for mlx4 and ocrdma device follows::
mlx4_0 hca_handle=1 hca_object=20
ocrdma1 hca_handle=1 hca_object=23
-5-6. Misc
+Misc
+----
-5-6-1. perf_event
+perf_event
+~~~~~~~~~~
perf_event controller, if not mounted on a legacy hierarchy, is
automatically enabled on the v2 hierarchy so that perf events can
@@ -1292,9 +1297,11 @@
moved to a legacy hierarchy after v2 hierarchy is populated.
-6. Namespace
+Namespace
+=========
-6-1. Basics
+Basics
+------
cgroup namespace provides a mechanism to virtualize the view of the
"/proc/$PID/cgroup" file and cgroup mounts. The CLONE_NEWCGROUP clone
@@ -1308,7 +1315,7 @@
complete path of the cgroup of a process. In a container setup where
a set of cgroups and namespaces are intended to isolate processes the
"/proc/$PID/cgroup" file may leak potential system level information
-to the isolated processes. For Example:
+to the isolated processes. For Example::
# cat /proc/self/cgroup
0::/batchjobs/container_id1
@@ -1316,14 +1323,14 @@
The path '/batchjobs/container_id1' can be considered as system-data
and undesirable to expose to the isolated processes. cgroup namespace
can be used to restrict visibility of this path. For example, before
-creating a cgroup namespace, one would see:
+creating a cgroup namespace, one would see::
# ls -l /proc/self/ns/cgroup
lrwxrwxrwx 1 root root 0 2014-07-15 10:37 /proc/self/ns/cgroup -> cgroup:[4026531835]
# cat /proc/self/cgroup
0::/batchjobs/container_id1
-After unsharing a new namespace, the view changes.
+After unsharing a new namespace, the view changes::
# ls -l /proc/self/ns/cgroup
lrwxrwxrwx 1 root root 0 2014-07-15 10:35 /proc/self/ns/cgroup -> cgroup:[4026532183]
@@ -1341,7 +1348,8 @@
remain.
-6-2. The Root and Views
+The Root and Views
+------------------
The 'cgroupns root' for a cgroup namespace is the cgroup in which the
process calling unshare(2) is running. For example, if a process in
@@ -1350,7 +1358,7 @@
init_cgroup_ns, this is the real root ('/') cgroup.
The cgroupns root cgroup does not change even if the namespace creator
-process later moves to a different cgroup.
+process later moves to a different cgroup::
# ~/unshare -c # unshare cgroupns in some cgroup
# cat /proc/self/cgroup
@@ -1364,7 +1372,7 @@
Processes running inside the cgroup namespace will be able to see
cgroup paths (in /proc/self/cgroup) only inside their root cgroup.
-From within an unshared cgroupns:
+From within an unshared cgroupns::
# sleep 100000 &
[1] 7353
@@ -1373,7 +1381,7 @@
0::/sub_cgrp_1
From the initial cgroup namespace, the real cgroup path will be
-visible:
+visible::
$ cat /proc/7353/cgroup
0::/batchjobs/container_id1/sub_cgrp_1
@@ -1381,7 +1389,7 @@
From a sibling cgroup namespace (that is, a namespace rooted at a
different cgroup), the cgroup path relative to its own cgroup
namespace root will be shown. For instance, if PID 7353's cgroup
-namespace root is at '/batchjobs/container_id2', then it will see
+namespace root is at '/batchjobs/container_id2', then it will see::
# cat /proc/7353/cgroup
0::/../container_id2/sub_cgrp_1
@@ -1390,13 +1398,14 @@
its relative to the cgroup namespace root of the caller.
-6-3. Migration and setns(2)
+Migration and setns(2)
+----------------------
Processes inside a cgroup namespace can move into and out of the
namespace root if they have proper access to external cgroups. For
example, from inside a namespace with cgroupns root at
/batchjobs/container_id1, and assuming that the global hierarchy is
-still accessible inside cgroupns:
+still accessible inside cgroupns::
# cat /proc/7353/cgroup
0::/sub_cgrp_1
@@ -1418,10 +1427,11 @@
process under the target cgroup namespace root.
-6-4. Interaction with Other Namespaces
+Interaction with Other Namespaces
+---------------------------------
Namespace specific cgroup hierarchy can be mounted by a process
-running inside a non-init cgroup namespace.
+running inside a non-init cgroup namespace::
# mount -t cgroup2 none $MOUNT_POINT
@@ -1434,27 +1444,27 @@
provides a properly isolated cgroup view inside the container.
-P. Information on Kernel Programming
+Information on Kernel Programming
+=================================
This section contains kernel programming information in the areas
where interacting with cgroup is necessary. cgroup core and
controllers are not covered.
-P-1. Filesystem Support for Writeback
+Filesystem Support for Writeback
+--------------------------------
A filesystem can support cgroup writeback by updating
address_space_operations->writepage[s]() to annotate bio's using the
following two functions.
wbc_init_bio(@wbc, @bio)
-
Should be called for each bio carrying writeback data and
associates the bio with the inode's owner cgroup. Can be
called anytime between bio allocation and submission.
wbc_account_io(@wbc, @page, @bytes)
-
Should be called for each data segment being written out.
While this function doesn't care exactly when it's called
during the writeback session, it's the easiest and most
@@ -1475,7 +1485,8 @@
directly.
-D. Deprecated v1 Core Features
+Deprecated v1 Core Features
+===========================
- Multiple hierarchies including named ones are not supported.
@@ -1489,9 +1500,11 @@
at the root instead.
-R. Issues with v1 and Rationales for v2
+Issues with v1 and Rationales for v2
+====================================
-R-1. Multiple Hierarchies
+Multiple Hierarchies
+--------------------
cgroup v1 allowed an arbitrary number of hierarchies and each
hierarchy could host any number of controllers. While this seemed to
@@ -1543,7 +1556,8 @@
to control how CPU cycles are distributed.
-R-2. Thread Granularity
+Thread Granularity
+------------------
cgroup v1 allowed threads of a process to belong to different cgroups.
This didn't make sense for some controllers and those controllers
@@ -1586,7 +1600,8 @@
locked into constructs inadvertently.
-R-3. Competition Between Inner Nodes and Threads
+Competition Between Inner Nodes and Threads
+-------------------------------------------
cgroup v1 allowed threads to be in any cgroups which created an
interesting problem where threads belonging to a parent cgroup and its
@@ -1605,7 +1620,7 @@
The io controller implicitly created a hidden leaf node for each
cgroup to host the threads. The hidden leaf had its own copies of all
-the knobs with "leaf_" prefixed. While this allowed equivalent
+the knobs with ``leaf_`` prefixed. While this allowed equivalent
control over internal threads, it was with serious drawbacks. It
always added an extra layer of nesting which wouldn't be necessary
otherwise, made the interface messy and significantly complicated the
@@ -1626,7 +1641,8 @@
in a uniform way.
-R-4. Other Interface Issues
+Other Interface Issues
+----------------------
cgroup v1 grew without oversight and developed a large number of
idiosyncrasies and inconsistencies. One issue on the cgroup core side
@@ -1654,9 +1670,11 @@
controllers so that they expose minimal and consistent interfaces.
-R-5. Controller Issues and Remedies
+Controller Issues and Remedies
+------------------------------
-R-5-1. Memory
+Memory
+~~~~~~
The original lower boundary, the soft limit, is defined as a limit
that is per default unset. As a result, the set of cgroups that
diff --git a/Documentation/circular-buffers.txt b/Documentation/circular-buffers.txt
index 4a824d2..d462817 100644
--- a/Documentation/circular-buffers.txt
+++ b/Documentation/circular-buffers.txt
@@ -1,9 +1,9 @@
- ================
- CIRCULAR BUFFERS
- ================
+================
+Circular Buffers
+================
-By: David Howells <dhowells@redhat.com>
- Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+:Author: David Howells <dhowells@redhat.com>
+:Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Linux provides a number of features that can be used to implement circular
@@ -20,7 +20,7 @@
serialising them, and to handle multiple consumers by serialising them.
-Contents:
+.. Contents:
(*) What is a circular buffer?
@@ -31,8 +31,8 @@
- The consumer.
-==========================
-WHAT IS A CIRCULAR BUFFER?
+
+What is a circular buffer?
==========================
First of all, what is a circular buffer? A circular buffer is a buffer of
@@ -60,9 +60,7 @@
be careful, however, as a region more than one unit in size may wrap the end of
the buffer and be broken into two segments.
-
-============================
-MEASURING POWER-OF-2 BUFFERS
+Measuring power-of-2 buffers
============================
Calculation of the occupancy or the remaining capacity of an arbitrarily sized
@@ -71,13 +69,13 @@
then a much quicker bitwise-AND instruction can be used instead.
Linux provides a set of macros for handling power-of-2 circular buffers. These
-can be made use of by:
+can be made use of by::
#include <linux/circ_buf.h>
The macros are:
- (*) Measure the remaining capacity of a buffer:
+ (#) Measure the remaining capacity of a buffer::
CIRC_SPACE(head_index, tail_index, buffer_size);
@@ -85,7 +83,7 @@
can be inserted.
- (*) Measure the maximum consecutive immediate space in a buffer:
+ (#) Measure the maximum consecutive immediate space in a buffer::
CIRC_SPACE_TO_END(head_index, tail_index, buffer_size);
@@ -94,14 +92,14 @@
beginning of the buffer.
- (*) Measure the occupancy of a buffer:
+ (#) Measure the occupancy of a buffer::
CIRC_CNT(head_index, tail_index, buffer_size);
This returns the number of items currently occupying a buffer[2].
- (*) Measure the non-wrapping occupancy of a buffer:
+ (#) Measure the non-wrapping occupancy of a buffer::
CIRC_CNT_TO_END(head_index, tail_index, buffer_size);
@@ -112,7 +110,7 @@
Each of these macros will nominally return a value between 0 and buffer_size-1,
however:
- [1] CIRC_SPACE*() are intended to be used in the producer. To the producer
+ (1) CIRC_SPACE*() are intended to be used in the producer. To the producer
they will return a lower bound as the producer controls the head index,
but the consumer may still be depleting the buffer on another CPU and
moving the tail index.
@@ -120,7 +118,7 @@
To the consumer it will show an upper bound as the producer may be busy
depleting the space.
- [2] CIRC_CNT*() are intended to be used in the consumer. To the consumer they
+ (2) CIRC_CNT*() are intended to be used in the consumer. To the consumer they
will return a lower bound as the consumer controls the tail index, but the
producer may still be filling the buffer on another CPU and moving the
head index.
@@ -128,14 +126,12 @@
To the producer it will show an upper bound as the consumer may be busy
emptying the buffer.
- [3] To a third party, the order in which the writes to the indices by the
+ (3) To a third party, the order in which the writes to the indices by the
producer and consumer become visible cannot be guaranteed as they are
independent and may be made on different CPUs - so the result in such a
situation will merely be a guess, and may even be negative.
-
-===========================================
-USING MEMORY BARRIERS WITH CIRCULAR BUFFERS
+Using memory barriers with circular buffers
===========================================
By using memory barriers in conjunction with circular buffers, you can avoid
@@ -152,10 +148,10 @@
two sides can operate simultaneously.
-THE PRODUCER
+The producer
------------
-The producer will look something like this:
+The producer will look something like this::
spin_lock(&producer_lock);
@@ -193,10 +189,10 @@
vacated a given element and the write by the producer to that same element.
-THE CONSUMER
+The Consumer
------------
-The consumer will look something like this:
+The consumer will look something like this::
spin_lock(&consumer_lock);
@@ -235,8 +231,7 @@
against previous accesses.
-===============
-FURTHER READING
+Further reading
===============
See also Documentation/memory-barriers.txt for a description of Linux's memory
diff --git a/Documentation/clk.txt b/Documentation/clk.txt
index 22f026a..be909ed 100644
--- a/Documentation/clk.txt
+++ b/Documentation/clk.txt
@@ -1,12 +1,16 @@
- The Common Clk Framework
- Mike Turquette <mturquette@ti.com>
+========================
+The Common Clk Framework
+========================
+
+:Author: Mike Turquette <mturquette@ti.com>
This document endeavours to explain the common clk framework details,
and how to port a platform over to this framework. It is not yet a
detailed explanation of the clock api in include/linux/clk.h, but
perhaps someday it will include that information.
- Part 1 - introduction and interface split
+Introduction and interface split
+================================
The common clk framework is an interface to control the clock nodes
available on various devices today. This may come in the form of clock
@@ -35,10 +39,11 @@
allows for easy navigation between the two discrete halves of the common
clock interface.
- Part 2 - common data structures and api
+Common data structures and api
+==============================
Below is the common struct clk_core definition from
-drivers/clk/clk.c, modified for brevity:
+drivers/clk/clk.c, modified for brevity::
struct clk_core {
const char *name;
@@ -59,7 +64,7 @@
Platforms and devices utilizing the common struct clk_core use the struct
clk_ops pointer in struct clk_core to perform the hardware-specific parts of
-the operations defined in clk-provider.h:
+the operations defined in clk-provider.h::
struct clk_ops {
int (*prepare)(struct clk_hw *hw);
@@ -95,19 +100,20 @@
struct dentry *dentry);
};
- Part 3 - hardware clk implementations
+Hardware clk implementations
+============================
The strength of the common struct clk_core comes from its .ops and .hw pointers
which abstract the details of struct clk from the hardware-specific bits, and
vice versa. To illustrate consider the simple gateable clk implementation in
-drivers/clk/clk-gate.c:
+drivers/clk/clk-gate.c::
-struct clk_gate {
- struct clk_hw hw;
- void __iomem *reg;
- u8 bit_idx;
- ...
-};
+ struct clk_gate {
+ struct clk_hw hw;
+ void __iomem *reg;
+ u8 bit_idx;
+ ...
+ };
struct clk_gate contains struct clk_hw hw as well as hardware-specific
knowledge about which register and bit controls this clk's gating.
@@ -115,7 +121,7 @@
notifier_count, is needed here. That is all handled by the common
framework code and struct clk_core.
-Let's walk through enabling this clk from driver code:
+Let's walk through enabling this clk from driver code::
struct clk *clk;
clk = clk_get(NULL, "my_gateable_clk");
@@ -123,70 +129,71 @@
clk_prepare(clk);
clk_enable(clk);
-The call graph for clk_enable is very simple:
+The call graph for clk_enable is very simple::
-clk_enable(clk);
- clk->ops->enable(clk->hw);
- [resolves to...]
- clk_gate_enable(hw);
- [resolves struct clk gate with to_clk_gate(hw)]
- clk_gate_set_bit(gate);
+ clk_enable(clk);
+ clk->ops->enable(clk->hw);
+ [resolves to...]
+ clk_gate_enable(hw);
+ [resolves struct clk gate with to_clk_gate(hw)]
+ clk_gate_set_bit(gate);
-And the definition of clk_gate_set_bit:
+And the definition of clk_gate_set_bit::
-static void clk_gate_set_bit(struct clk_gate *gate)
-{
- u32 reg;
+ static void clk_gate_set_bit(struct clk_gate *gate)
+ {
+ u32 reg;
- reg = __raw_readl(gate->reg);
- reg |= BIT(gate->bit_idx);
- writel(reg, gate->reg);
-}
+ reg = __raw_readl(gate->reg);
+ reg |= BIT(gate->bit_idx);
+ writel(reg, gate->reg);
+ }
-Note that to_clk_gate is defined as:
+Note that to_clk_gate is defined as::
-#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
+ #define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
This pattern of abstraction is used for every clock hardware
representation.
- Part 4 - supporting your own clk hardware
+Supporting your own clk hardware
+================================
When implementing support for a new type of clock it is only necessary to
-include the following header:
+include the following header::
-#include <linux/clk-provider.h>
+ #include <linux/clk-provider.h>
To construct a clk hardware structure for your platform you must define
-the following:
+the following::
-struct clk_foo {
- struct clk_hw hw;
- ... hardware specific data goes here ...
-};
+ struct clk_foo {
+ struct clk_hw hw;
+ ... hardware specific data goes here ...
+ };
To take advantage of your data you'll need to support valid operations
-for your clk:
+for your clk::
-struct clk_ops clk_foo_ops {
- .enable = &clk_foo_enable;
- .disable = &clk_foo_disable;
-};
+ struct clk_ops clk_foo_ops {
+ .enable = &clk_foo_enable;
+ .disable = &clk_foo_disable;
+ };
-Implement the above functions using container_of:
+Implement the above functions using container_of::
-#define to_clk_foo(_hw) container_of(_hw, struct clk_foo, hw)
+ #define to_clk_foo(_hw) container_of(_hw, struct clk_foo, hw)
-int clk_foo_enable(struct clk_hw *hw)
-{
- struct clk_foo *foo;
+ int clk_foo_enable(struct clk_hw *hw)
+ {
+ struct clk_foo *foo;
- foo = to_clk_foo(hw);
+ foo = to_clk_foo(hw);
- ... perform magic on foo ...
+ ... perform magic on foo ...
- return 0;
-};
+ return 0;
+ };
Below is a matrix detailing which clk_ops are mandatory based upon the
hardware capabilities of that clock. A cell marked as "y" means
@@ -194,41 +201,56 @@
callback is invalid or otherwise unnecessary. Empty cells are either
optional or must be evaluated on a case-by-case basis.
- clock hardware characteristics
- -----------------------------------------------------------
- | gate | change rate | single parent | multiplexer | root |
- |------|-------------|---------------|-------------|------|
-.prepare | | | | | |
-.unprepare | | | | | |
- | | | | | |
-.enable | y | | | | |
-.disable | y | | | | |
-.is_enabled | y | | | | |
- | | | | | |
-.recalc_rate | | y | | | |
-.round_rate | | y [1] | | | |
-.determine_rate | | y [1] | | | |
-.set_rate | | y | | | |
- | | | | | |
-.set_parent | | | n | y | n |
-.get_parent | | | n | y | n |
- | | | | | |
-.recalc_accuracy| | | | | |
- | | | | | |
-.init | | | | | |
- -----------------------------------------------------------
-[1] either one of round_rate or determine_rate is required.
+.. table:: clock hardware characteristics
+
+ +----------------+------+-------------+---------------+-------------+------+
+ | | gate | change rate | single parent | multiplexer | root |
+ +================+======+=============+===============+=============+======+
+ |.prepare | | | | | |
+ +----------------+------+-------------+---------------+-------------+------+
+ |.unprepare | | | | | |
+ +----------------+------+-------------+---------------+-------------+------+
+ +----------------+------+-------------+---------------+-------------+------+
+ |.enable | y | | | | |
+ +----------------+------+-------------+---------------+-------------+------+
+ |.disable | y | | | | |
+ +----------------+------+-------------+---------------+-------------+------+
+ |.is_enabled | y | | | | |
+ +----------------+------+-------------+---------------+-------------+------+
+ +----------------+------+-------------+---------------+-------------+------+
+ |.recalc_rate | | y | | | |
+ +----------------+------+-------------+---------------+-------------+------+
+ |.round_rate | | y [1]_ | | | |
+ +----------------+------+-------------+---------------+-------------+------+
+ |.determine_rate | | y [1]_ | | | |
+ +----------------+------+-------------+---------------+-------------+------+
+ |.set_rate | | y | | | |
+ +----------------+------+-------------+---------------+-------------+------+
+ +----------------+------+-------------+---------------+-------------+------+
+ |.set_parent | | | n | y | n |
+ +----------------+------+-------------+---------------+-------------+------+
+ |.get_parent | | | n | y | n |
+ +----------------+------+-------------+---------------+-------------+------+
+ +----------------+------+-------------+---------------+-------------+------+
+ |.recalc_accuracy| | | | | |
+ +----------------+------+-------------+---------------+-------------+------+
+ +----------------+------+-------------+---------------+-------------+------+
+ |.init | | | | | |
+ +----------------+------+-------------+---------------+-------------+------+
+
+.. [1] either one of round_rate or determine_rate is required.
Finally, register your clock at run-time with a hardware-specific
registration function. This function simply populates struct clk_foo's
data and then passes the common struct clk parameters to the framework
-with a call to:
+with a call to::
-clk_register(...)
+ clk_register(...)
-See the basic clock types in drivers/clk/clk-*.c for examples.
+See the basic clock types in ``drivers/clk/clk-*.c`` for examples.
- Part 5 - Disabling clock gating of unused clocks
+Disabling clock gating of unused clocks
+=======================================
Sometimes during development it can be useful to be able to bypass the
default disabling of unused clocks. For example, if drivers aren't enabling
@@ -239,7 +261,8 @@
To bypass this disabling, include "clk_ignore_unused" in the bootargs to the
kernel.
- Part 6 - Locking
+Locking
+=======
The common clock framework uses two global locks, the prepare lock and the
enable lock.
diff --git a/Documentation/core-api/kernel-api.rst b/Documentation/core-api/kernel-api.rst
index 9ec8488..17b0091 100644
--- a/Documentation/core-api/kernel-api.rst
+++ b/Documentation/core-api/kernel-api.rst
@@ -114,7 +114,7 @@
User Space Memory Access
------------------------
-.. kernel-doc:: arch/x86/include/asm/uaccess_32.h
+.. kernel-doc:: arch/x86/include/asm/uaccess.h
:internal:
.. kernel-doc:: arch/x86/lib/usercopy_32.c
diff --git a/Documentation/cpu-load.txt b/Documentation/cpu-load.txt
index 287224e..2d01ce4 100644
--- a/Documentation/cpu-load.txt
+++ b/Documentation/cpu-load.txt
@@ -1,9 +1,10 @@
+========
CPU load
---------
+========
-Linux exports various bits of information via `/proc/stat' and
-`/proc/uptime' that userland tools, such as top(1), use to calculate
-the average time system spent in a particular state, for example:
+Linux exports various bits of information via ``/proc/stat`` and
+``/proc/uptime`` that userland tools, such as top(1), use to calculate
+the average time system spent in a particular state, for example::
$ iostat
Linux 2.6.18.3-exp (linmac) 02/20/2007
@@ -17,7 +18,7 @@
system spent 10.01% of the time doing work in user space, 2.92% in the
kernel, and was overall 81.63% of the time idle.
-In most cases the `/proc/stat' information reflects the reality quite
+In most cases the ``/proc/stat`` information reflects the reality quite
closely, however due to the nature of how/when the kernel collects
this data sometimes it can not be trusted at all.
@@ -33,78 +34,78 @@
-------
If we imagine the system with one task that periodically burns cycles
-in the following manner:
+in the following manner::
- time line between two timer interrupts
-|--------------------------------------|
- ^ ^
- |_ something begins working |
- |_ something goes to sleep
- (only to be awaken quite soon)
+ time line between two timer interrupts
+ |--------------------------------------|
+ ^ ^
+ |_ something begins working |
+ |_ something goes to sleep
+ (only to be awaken quite soon)
In the above situation the system will be 0% loaded according to the
-`/proc/stat' (since the timer interrupt will always happen when the
+``/proc/stat`` (since the timer interrupt will always happen when the
system is executing the idle handler), but in reality the load is
closer to 99%.
One can imagine many more situations where this behavior of the kernel
-will lead to quite erratic information inside `/proc/stat'.
+will lead to quite erratic information inside ``/proc/stat``::
-/* gcc -o hog smallhog.c */
-#include <time.h>
-#include <limits.h>
-#include <signal.h>
-#include <sys/time.h>
-#define HIST 10
+ /* gcc -o hog smallhog.c */
+ #include <time.h>
+ #include <limits.h>
+ #include <signal.h>
+ #include <sys/time.h>
+ #define HIST 10
-static volatile sig_atomic_t stop;
+ static volatile sig_atomic_t stop;
-static void sighandler (int signr)
-{
- (void) signr;
- stop = 1;
-}
-static unsigned long hog (unsigned long niters)
-{
- stop = 0;
- while (!stop && --niters);
- return niters;
-}
-int main (void)
-{
- int i;
- struct itimerval it = { .it_interval = { .tv_sec = 0, .tv_usec = 1 },
- .it_value = { .tv_sec = 0, .tv_usec = 1 } };
- sigset_t set;
- unsigned long v[HIST];
- double tmp = 0.0;
- unsigned long n;
- signal (SIGALRM, &sighandler);
- setitimer (ITIMER_REAL, &it, NULL);
+ static void sighandler (int signr)
+ {
+ (void) signr;
+ stop = 1;
+ }
+ static unsigned long hog (unsigned long niters)
+ {
+ stop = 0;
+ while (!stop && --niters);
+ return niters;
+ }
+ int main (void)
+ {
+ int i;
+ struct itimerval it = { .it_interval = { .tv_sec = 0, .tv_usec = 1 },
+ .it_value = { .tv_sec = 0, .tv_usec = 1 } };
+ sigset_t set;
+ unsigned long v[HIST];
+ double tmp = 0.0;
+ unsigned long n;
+ signal (SIGALRM, &sighandler);
+ setitimer (ITIMER_REAL, &it, NULL);
- hog (ULONG_MAX);
- for (i = 0; i < HIST; ++i) v[i] = ULONG_MAX - hog (ULONG_MAX);
- for (i = 0; i < HIST; ++i) tmp += v[i];
- tmp /= HIST;
- n = tmp - (tmp / 3.0);
+ hog (ULONG_MAX);
+ for (i = 0; i < HIST; ++i) v[i] = ULONG_MAX - hog (ULONG_MAX);
+ for (i = 0; i < HIST; ++i) tmp += v[i];
+ tmp /= HIST;
+ n = tmp - (tmp / 3.0);
- sigemptyset (&set);
- sigaddset (&set, SIGALRM);
+ sigemptyset (&set);
+ sigaddset (&set, SIGALRM);
- for (;;) {
- hog (n);
- sigwait (&set, &i);
- }
- return 0;
-}
+ for (;;) {
+ hog (n);
+ sigwait (&set, &i);
+ }
+ return 0;
+ }
References
----------
-http://lkml.org/lkml/2007/2/12/6
-Documentation/filesystems/proc.txt (1.8)
+- http://lkml.org/lkml/2007/2/12/6
+- Documentation/filesystems/proc.txt (1.8)
Thanks
diff --git a/Documentation/cputopology.txt b/Documentation/cputopology.txt
index 127c9d8..c6e7e91 100644
--- a/Documentation/cputopology.txt
+++ b/Documentation/cputopology.txt
@@ -1,3 +1,6 @@
+===========================================
+How CPU topology info is exported via sysfs
+===========================================
Export CPU topology info via sysfs. Items (attributes) are similar
to /proc/cpuinfo output of some architectures:
@@ -75,24 +78,26 @@
they reflect the cpu and cache hierarchy.
For an architecture to support this feature, it must define some of
-these macros in include/asm-XXX/topology.h:
-#define topology_physical_package_id(cpu)
-#define topology_core_id(cpu)
-#define topology_book_id(cpu)
-#define topology_drawer_id(cpu)
-#define topology_sibling_cpumask(cpu)
-#define topology_core_cpumask(cpu)
-#define topology_book_cpumask(cpu)
-#define topology_drawer_cpumask(cpu)
+these macros in include/asm-XXX/topology.h::
-The type of **_id macros is int.
-The type of **_cpumask macros is (const) struct cpumask *. The latter
-correspond with appropriate **_siblings sysfs attributes (except for
+ #define topology_physical_package_id(cpu)
+ #define topology_core_id(cpu)
+ #define topology_book_id(cpu)
+ #define topology_drawer_id(cpu)
+ #define topology_sibling_cpumask(cpu)
+ #define topology_core_cpumask(cpu)
+ #define topology_book_cpumask(cpu)
+ #define topology_drawer_cpumask(cpu)
+
+The type of ``**_id macros`` is int.
+The type of ``**_cpumask macros`` is ``(const) struct cpumask *``. The latter
+correspond with appropriate ``**_siblings`` sysfs attributes (except for
topology_sibling_cpumask() which corresponds with thread_siblings).
To be consistent on all architectures, include/linux/topology.h
provides default definitions for any of the above macros that are
not defined by include/asm-XXX/topology.h:
+
1) physical_package_id: -1
2) core_id: 0
3) sibling_cpumask: just the given CPU
@@ -107,6 +112,7 @@
/sys/devices/system/cpu and includes these files. The internal
source for the output is in brackets ("[]").
+ =========== ==========================================================
kernel_max: the maximum CPU index allowed by the kernel configuration.
[NR_CPUS-1]
@@ -122,6 +128,7 @@
present: CPUs that have been identified as being present in the
system. [cpu_present_mask]
+ =========== ==========================================================
The format for the above output is compatible with cpulist_parse()
[see <linux/cpumask.h>]. Some examples follow.
@@ -129,7 +136,7 @@
In this example, there are 64 CPUs in the system but cpus 32-63 exceed
the kernel max which is limited to 0..31 by the NR_CPUS config option
being 32. Note also that CPUs 2 and 4-31 are not online but could be
-brought online as they are both present and possible.
+brought online as they are both present and possible::
kernel_max: 31
offline: 2,4-31,32-63
@@ -140,7 +147,7 @@
In this example, the NR_CPUS config option is 128, but the kernel was
started with possible_cpus=144. There are 4 CPUs in the system and cpu2
was manually taken offline (and is the only CPU that can be brought
-online.)
+online.)::
kernel_max: 127
offline: 2,4-127,128-143
diff --git a/Documentation/crc32.txt b/Documentation/crc32.txt
index a08a7dd..8a6860f 100644
--- a/Documentation/crc32.txt
+++ b/Documentation/crc32.txt
@@ -1,4 +1,6 @@
-A brief CRC tutorial.
+=================================
+brief tutorial on CRC computation
+=================================
A CRC is a long-division remainder. You add the CRC to the message,
and the whole thing (message+CRC) is a multiple of the given
@@ -8,7 +10,8 @@
is used by a lot of hardware implementations, and is why so many
protocols put the end-of-frame flag after the CRC.
-It's actually the same long division you learned in school, except that
+It's actually the same long division you learned in school, except that:
+
- We're working in binary, so the digits are only 0 and 1, and
- When dividing polynomials, there are no carries. Rather than add and
subtract, we just xor. Thus, we tend to get a bit sloppy about
@@ -40,11 +43,12 @@
the polynomial from the remainder and we're back to where we started,
ready to process the next bit.
-A big-endian CRC written this way would be coded like:
-for (i = 0; i < input_bits; i++) {
- multiple = remainder & 0x80000000 ? CRCPOLY : 0;
- remainder = (remainder << 1 | next_input_bit()) ^ multiple;
-}
+A big-endian CRC written this way would be coded like::
+
+ for (i = 0; i < input_bits; i++) {
+ multiple = remainder & 0x80000000 ? CRCPOLY : 0;
+ remainder = (remainder << 1 | next_input_bit()) ^ multiple;
+ }
Notice how, to get at bit 32 of the shifted remainder, we look
at bit 31 of the remainder *before* shifting it.
@@ -54,25 +58,26 @@
32 bits later. Thus, the first 32 cycles of this are pretty boring.
Also, to add the CRC to a message, we need a 32-bit-long hole for it at
the end, so we have to add 32 extra cycles shifting in zeros at the
-end of every message,
+end of every message.
These details lead to a standard trick: rearrange merging in the
next_input_bit() until the moment it's needed. Then the first 32 cycles
can be precomputed, and merging in the final 32 zero bits to make room
-for the CRC can be skipped entirely. This changes the code to:
+for the CRC can be skipped entirely. This changes the code to::
-for (i = 0; i < input_bits; i++) {
- remainder ^= next_input_bit() << 31;
- multiple = (remainder & 0x80000000) ? CRCPOLY : 0;
- remainder = (remainder << 1) ^ multiple;
-}
+ for (i = 0; i < input_bits; i++) {
+ remainder ^= next_input_bit() << 31;
+ multiple = (remainder & 0x80000000) ? CRCPOLY : 0;
+ remainder = (remainder << 1) ^ multiple;
+ }
-With this optimization, the little-endian code is particularly simple:
-for (i = 0; i < input_bits; i++) {
- remainder ^= next_input_bit();
- multiple = (remainder & 1) ? CRCPOLY : 0;
- remainder = (remainder >> 1) ^ multiple;
-}
+With this optimization, the little-endian code is particularly simple::
+
+ for (i = 0; i < input_bits; i++) {
+ remainder ^= next_input_bit();
+ multiple = (remainder & 1) ? CRCPOLY : 0;
+ remainder = (remainder >> 1) ^ multiple;
+ }
The most significant coefficient of the remainder polynomial is stored
in the least significant bit of the binary "remainder" variable.
@@ -81,23 +86,25 @@
As long as next_input_bit is returning the bits in a sensible order, we don't
*have* to wait until the last possible moment to merge in additional bits.
-We can do it 8 bits at a time rather than 1 bit at a time:
-for (i = 0; i < input_bytes; i++) {
- remainder ^= next_input_byte() << 24;
- for (j = 0; j < 8; j++) {
- multiple = (remainder & 0x80000000) ? CRCPOLY : 0;
- remainder = (remainder << 1) ^ multiple;
- }
-}
+We can do it 8 bits at a time rather than 1 bit at a time::
-Or in little-endian:
-for (i = 0; i < input_bytes; i++) {
- remainder ^= next_input_byte();
- for (j = 0; j < 8; j++) {
- multiple = (remainder & 1) ? CRCPOLY : 0;
- remainder = (remainder >> 1) ^ multiple;
+ for (i = 0; i < input_bytes; i++) {
+ remainder ^= next_input_byte() << 24;
+ for (j = 0; j < 8; j++) {
+ multiple = (remainder & 0x80000000) ? CRCPOLY : 0;
+ remainder = (remainder << 1) ^ multiple;
+ }
}
-}
+
+Or in little-endian::
+
+ for (i = 0; i < input_bytes; i++) {
+ remainder ^= next_input_byte();
+ for (j = 0; j < 8; j++) {
+ multiple = (remainder & 1) ? CRCPOLY : 0;
+ remainder = (remainder >> 1) ^ multiple;
+ }
+ }
If the input is a multiple of 32 bits, you can even XOR in a 32-bit
word at a time and increase the inner loop count to 32.
diff --git a/Documentation/crypto/asymmetric-keys.txt b/Documentation/crypto/asymmetric-keys.txt
index b82b6ad..5969bf4 100644
--- a/Documentation/crypto/asymmetric-keys.txt
+++ b/Documentation/crypto/asymmetric-keys.txt
@@ -10,6 +10,7 @@
- Signature verification.
- Asymmetric key subtypes.
- Instantiation data parsers.
+ - Keyring link restrictions.
========
@@ -318,7 +319,8 @@
=========================
Keyrings created from userspace using add_key can be configured to check the
-signature of the key being linked.
+signature of the key being linked. Keys without a valid signature are not
+allowed to link.
Several restriction methods are available:
@@ -327,9 +329,10 @@
- Option string used with KEYCTL_RESTRICT_KEYRING:
- "builtin_trusted"
- The kernel builtin trusted keyring will be searched for the signing
- key. The ca_keys kernel parameter also affects which keys are used for
- signature verification.
+ The kernel builtin trusted keyring will be searched for the signing key.
+ If the builtin trusted keyring is not configured, all links will be
+ rejected. The ca_keys kernel parameter also affects which keys are used
+ for signature verification.
(2) Restrict using the kernel builtin and secondary trusted keyrings
@@ -337,8 +340,10 @@
- "builtin_and_secondary_trusted"
The kernel builtin and secondary trusted keyrings will be searched for the
- signing key. The ca_keys kernel parameter also affects which keys are used
- for signature verification.
+ signing key. If the secondary trusted keyring is not configured, this
+ restriction will behave like the "builtin_trusted" option. The ca_keys
+ kernel parameter also affects which keys are used for signature
+ verification.
(3) Restrict using a separate key or keyring
@@ -346,7 +351,7 @@
- "key_or_keyring:<key or keyring serial number>[:chain]"
Whenever a key link is requested, the link will only succeed if the key
- being linked is signed by one of the designated keys. This key may be
+ being linked is signed by one of the designated keys. This key may be
specified directly by providing a serial number for one asymmetric key, or
a group of keys may be searched for the signing key by providing the
serial number for a keyring.
@@ -354,7 +359,51 @@
When the "chain" option is provided at the end of the string, the keys
within the destination keyring will also be searched for signing keys.
This allows for verification of certificate chains by adding each
- cert in order (starting closest to the root) to one keyring.
+ certificate in order (starting closest to the root) to a keyring. For
+ instance, one keyring can be populated with links to a set of root
+ certificates, with a separate, restricted keyring set up for each
+ certificate chain to be validated:
+
+ # Create and populate a keyring for root certificates
+ root_id=`keyctl add keyring root-certs "" @s`
+ keyctl padd asymmetric "" $root_id < root1.cert
+ keyctl padd asymmetric "" $root_id < root2.cert
+
+ # Create and restrict a keyring for the certificate chain
+ chain_id=`keyctl add keyring chain "" @s`
+ keyctl restrict_keyring $chain_id asymmetric key_or_keyring:$root_id:chain
+
+ # Attempt to add each certificate in the chain, starting with the
+ # certificate closest to the root.
+ keyctl padd asymmetric "" $chain_id < intermediateA.cert
+ keyctl padd asymmetric "" $chain_id < intermediateB.cert
+ keyctl padd asymmetric "" $chain_id < end-entity.cert
+
+ If the final end-entity certificate is successfully added to the "chain"
+ keyring, we can be certain that it has a valid signing chain going back to
+ one of the root certificates.
+
+ A single keyring can be used to verify a chain of signatures by
+ restricting the keyring after linking the root certificate:
+
+ # Create a keyring for the certificate chain and add the root
+ chain2_id=`keyctl add keyring chain2 "" @s`
+ keyctl padd asymmetric "" $chain2_id < root1.cert
+
+ # Restrict the keyring that already has root1.cert linked. The cert
+ # will remain linked by the keyring.
+ keyctl restrict_keyring $chain2_id asymmetric key_or_keyring:0:chain
+
+ # Attempt to add each certificate in the chain, starting with the
+ # certificate closest to the root.
+ keyctl padd asymmetric "" $chain2_id < intermediateA.cert
+ keyctl padd asymmetric "" $chain2_id < intermediateB.cert
+ keyctl padd asymmetric "" $chain2_id < end-entity.cert
+
+ If the final end-entity certificate is successfully added to the "chain2"
+ keyring, we can be certain that there is a valid signing chain going back
+ to the root certificate that was added before the keyring was restricted.
+
In all of these cases, if the signing key is found the signature of the key to
be linked will be verified using the signing key. The requested key is added
diff --git a/Documentation/dcdbas.txt b/Documentation/dcdbas.txt
index e1c52e2..309cc57 100644
--- a/Documentation/dcdbas.txt
+++ b/Documentation/dcdbas.txt
@@ -1,4 +1,9 @@
+===================================
+Dell Systems Management Base Driver
+===================================
+
Overview
+========
The Dell Systems Management Base Driver provides a sysfs interface for
systems management software such as Dell OpenManage to perform system
@@ -17,6 +22,7 @@
System Management Interrupt
+===========================
On some Dell systems, systems management software must access certain
management information via a system management interrupt (SMI). The SMI data
@@ -24,12 +30,12 @@
buffer is required for the SMI. The driver maintains the memory required for
the SMI and provides a way for the application to generate the SMI.
The driver creates the following sysfs entries for systems management
-software to perform these system management interrupts:
+software to perform these system management interrupts::
-/sys/devices/platform/dcdbas/smi_data
-/sys/devices/platform/dcdbas/smi_data_buf_phys_addr
-/sys/devices/platform/dcdbas/smi_data_buf_size
-/sys/devices/platform/dcdbas/smi_request
+ /sys/devices/platform/dcdbas/smi_data
+ /sys/devices/platform/dcdbas/smi_data_buf_phys_addr
+ /sys/devices/platform/dcdbas/smi_data_buf_size
+ /sys/devices/platform/dcdbas/smi_request
Systems management software must perform the following steps to execute
a SMI using this driver:
@@ -43,6 +49,7 @@
Host Control Action
+===================
Dell OpenManage supports a host control feature that allows the administrator
to perform a power cycle or power off of the system after the OS has finished
@@ -69,12 +76,14 @@
Host Control SMI Type
+=====================
The following table shows the value to write to host_control_smi_type to
perform a power cycle or power off host control action:
+=================== =====================
PowerEdge System Host Control SMI Type
----------------- ---------------------
+=================== =====================
300 HC_SMITYPE_TYPE1
1300 HC_SMITYPE_TYPE1
1400 HC_SMITYPE_TYPE2
@@ -87,5 +96,4 @@
1655MC HC_SMITYPE_TYPE2
700 HC_SMITYPE_TYPE3
750 HC_SMITYPE_TYPE3
-
-
+=================== =====================
diff --git a/Documentation/debugging-via-ohci1394.txt b/Documentation/debugging-via-ohci1394.txt
index 9ff026d..981ad4f 100644
--- a/Documentation/debugging-via-ohci1394.txt
+++ b/Documentation/debugging-via-ohci1394.txt
@@ -1,6 +1,6 @@
-
- Using physical DMA provided by OHCI-1394 FireWire controllers for debugging
- ---------------------------------------------------------------------------
+===========================================================================
+Using physical DMA provided by OHCI-1394 FireWire controllers for debugging
+===========================================================================
Introduction
------------
@@ -91,10 +91,10 @@
1) Verify that your hardware is supported:
Load the firewire-ohci module and check your kernel logs.
- You should see a line similar to
+ You should see a line similar to::
- firewire_ohci 0000:15:00.1: added OHCI v1.0 device as card 2, 4 IR + 4 IT
- ... contexts, quirks 0x11
+ firewire_ohci 0000:15:00.1: added OHCI v1.0 device as card 2, 4 IR + 4 IT
+ ... contexts, quirks 0x11
when loading the driver. If you have no supported controller, many PCI,
CardBus and even some Express cards which are fully compliant to OHCI-1394
@@ -113,9 +113,9 @@
stable connection and has matching connectors (there are small 4-pin and
large 6-pin FireWire ports) will do.
- If an driver is running on both machines you should see a line like
+ If an driver is running on both machines you should see a line like::
- firewire_core 0000:15:00.1: created device fw1: GUID 00061b0020105917, S400
+ firewire_core 0000:15:00.1: created device fw1: GUID 00061b0020105917, S400
on both machines in the kernel log when the cable is plugged in
and connects the two machines.
@@ -123,7 +123,7 @@
3) Test physical DMA using firescope:
On the debug host, make sure that /dev/fw* is accessible,
- then start firescope:
+ then start firescope::
$ firescope
Port 0 (/dev/fw1) opened, 2 nodes detected
@@ -163,7 +163,7 @@
host loaded, reboot the debugged machine, booting the kernel which has
CONFIG_PROVIDE_OHCI1394_DMA_INIT enabled, with the option ohci1394_dma=early.
- Then, on the debugging host, run firescope, for example by using -A:
+ Then, on the debugging host, run firescope, for example by using -A::
firescope -A System.map-of-debug-target-kernel
@@ -178,6 +178,7 @@
Notes
-----
+
Documentation and specifications: http://halobates.de/firewire/
FireWire is a trademark of Apple Inc. - for more information please refer to:
diff --git a/Documentation/dell_rbu.txt b/Documentation/dell_rbu.txt
index d262e22..0fdb6aa 100644
--- a/Documentation/dell_rbu.txt
+++ b/Documentation/dell_rbu.txt
@@ -1,18 +1,30 @@
-Purpose:
-Demonstrate the usage of the new open sourced rbu (Remote BIOS Update) driver
+=============================================================
+Usage of the new open sourced rbu (Remote BIOS Update) driver
+=============================================================
+
+Purpose
+=======
+
+Document demonstrating the use of the Dell Remote BIOS Update driver.
for updating BIOS images on Dell servers and desktops.
-Scope:
+Scope
+=====
+
This document discusses the functionality of the rbu driver only.
It does not cover the support needed from applications to enable the BIOS to
update itself with the image downloaded in to the memory.
-Overview:
+Overview
+========
+
This driver works with Dell OpenManage or Dell Update Packages for updating
the BIOS on Dell servers (starting from servers sold since 1999), desktops
and notebooks (starting from those sold in 2005).
+
Please go to http://support.dell.com register and you can find info on
OpenManage and Dell Update packages (DUP).
+
Libsmbios can also be used to update BIOS on Dell systems go to
http://linux.dell.com/libsmbios/ for details.
@@ -22,6 +34,7 @@
using the driver breaks the image in to packets of fixed sizes and the driver
would place each packet in contiguous physical memory. The driver also
maintains a link list of packets for reading them back.
+
If the dell_rbu driver is unloaded all the allocated memory is freed.
The rbu driver needs to have an application (as mentioned above)which will
@@ -30,28 +43,33 @@
The user should not unload the rbu driver after downloading the BIOS image
or updating.
-The driver load creates the following directories under the /sys file system.
-/sys/class/firmware/dell_rbu/loading
-/sys/class/firmware/dell_rbu/data
-/sys/devices/platform/dell_rbu/image_type
-/sys/devices/platform/dell_rbu/data
-/sys/devices/platform/dell_rbu/packet_size
+The driver load creates the following directories under the /sys file system::
+
+ /sys/class/firmware/dell_rbu/loading
+ /sys/class/firmware/dell_rbu/data
+ /sys/devices/platform/dell_rbu/image_type
+ /sys/devices/platform/dell_rbu/data
+ /sys/devices/platform/dell_rbu/packet_size
The driver supports two types of update mechanism; monolithic and packetized.
These update mechanism depends upon the BIOS currently running on the system.
Most of the Dell systems support a monolithic update where the BIOS image is
copied to a single contiguous block of physical memory.
+
In case of packet mechanism the single memory can be broken in smaller chunks
of contiguous memory and the BIOS image is scattered in these packets.
By default the driver uses monolithic memory for the update type. This can be
changed to packets during the driver load time by specifying the load
-parameter image_type=packet. This can also be changed later as below
-echo packet > /sys/devices/platform/dell_rbu/image_type
+parameter image_type=packet. This can also be changed later as below::
+
+ echo packet > /sys/devices/platform/dell_rbu/image_type
In packet update mode the packet size has to be given before any packets can
-be downloaded. It is done as below
-echo XXXX > /sys/devices/platform/dell_rbu/packet_size
+be downloaded. It is done as below::
+
+ echo XXXX > /sys/devices/platform/dell_rbu/packet_size
+
In the packet update mechanism, the user needs to create a new file having
packets of data arranged back to back. It can be done as follows
The user creates packets header, gets the chunk of the BIOS image and
@@ -60,41 +78,54 @@
packet, the user needs to create more such packets out of the entire BIOS
image file and then arrange all these packets back to back in to one single
file.
+
This file is then copied to /sys/class/firmware/dell_rbu/data.
Once this file gets to the driver, the driver extracts packet_size data from
the file and spreads it across the physical memory in contiguous packet_sized
space.
+
This method makes sure that all the packets get to the driver in a single operation.
In monolithic update the user simply get the BIOS image (.hdr file) and copies
to the data file as is without any change to the BIOS image itself.
Do the steps below to download the BIOS image.
+
1) echo 1 > /sys/class/firmware/dell_rbu/loading
2) cp bios_image.hdr /sys/class/firmware/dell_rbu/data
3) echo 0 > /sys/class/firmware/dell_rbu/loading
The /sys/class/firmware/dell_rbu/ entries will remain till the following is
done.
-echo -1 > /sys/class/firmware/dell_rbu/loading
+
+::
+
+ echo -1 > /sys/class/firmware/dell_rbu/loading
+
Until this step is completed the driver cannot be unloaded.
+
Also echoing either mono, packet or init in to image_type will free up the
memory allocated by the driver.
If a user by accident executes steps 1 and 3 above without executing step 2;
it will make the /sys/class/firmware/dell_rbu/ entries disappear.
-The entries can be recreated by doing the following
-echo init > /sys/devices/platform/dell_rbu/image_type
-NOTE: echoing init in image_type does not change it original value.
+
+The entries can be recreated by doing the following::
+
+ echo init > /sys/devices/platform/dell_rbu/image_type
+
+.. note:: echoing init in image_type does not change it original value.
Also the driver provides /sys/devices/platform/dell_rbu/data readonly file to
read back the image downloaded.
-NOTE:
-This driver requires a patch for firmware_class.c which has the modified
-request_firmware_nowait function.
-Also after updating the BIOS image a user mode application needs to execute
-code which sends the BIOS update request to the BIOS. So on the next reboot
-the BIOS knows about the new image downloaded and it updates itself.
-Also don't unload the rbu driver if the image has to be updated.
+.. note::
+
+ This driver requires a patch for firmware_class.c which has the modified
+ request_firmware_nowait function.
+
+ Also after updating the BIOS image a user mode application needs to execute
+ code which sends the BIOS update request to the BIOS. So on the next reboot
+ the BIOS knows about the new image downloaded and it updates itself.
+ Also don't unload the rbu driver if the image has to be updated.
diff --git a/Documentation/device-mapper/dm-raid.txt b/Documentation/device-mapper/dm-raid.txt
index 7e06e65..4a0a746 100644
--- a/Documentation/device-mapper/dm-raid.txt
+++ b/Documentation/device-mapper/dm-raid.txt
@@ -343,3 +343,4 @@
1.11.0 Fix table line argument order
(wrong raid10_copies/raid10_format sequence)
1.11.1 Add raid4/5/6 journal write-back support via journal_mode option
+1.12.1 fix for MD deadlock between mddev_suspend() and md_write_start() available
diff --git a/Documentation/devicetree/bindings/ata/sata_rcar.txt b/Documentation/devicetree/bindings/ata/sata_rcar.txt
index 0764f9a..e20eac7 100644
--- a/Documentation/devicetree/bindings/ata/sata_rcar.txt
+++ b/Documentation/devicetree/bindings/ata/sata_rcar.txt
@@ -1,14 +1,22 @@
* Renesas R-Car SATA
Required properties:
-- compatible : should contain one of the following:
+- compatible : should contain one or more of the following:
- "renesas,sata-r8a7779" for R-Car H1
- ("renesas,rcar-sata" is deprecated)
- "renesas,sata-r8a7790-es1" for R-Car H2 ES1
- "renesas,sata-r8a7790" for R-Car H2 other than ES1
- "renesas,sata-r8a7791" for R-Car M2-W
- "renesas,sata-r8a7793" for R-Car M2-N
- "renesas,sata-r8a7795" for R-Car H3
+ - "renesas,rcar-gen2-sata" for a generic R-Car Gen2 compatible device
+ - "renesas,rcar-gen3-sata" for a generic R-Car Gen3 compatible device
+ - "renesas,rcar-sata" is deprecated
+
+ When compatible with the generic version nodes
+ must list the SoC-specific version corresponding
+ to the platform first followed by the generic
+ version.
+
- reg : address and length of the SATA registers;
- interrupts : must consist of one interrupt specifier.
- clocks : must contain a reference to the functional clock.
@@ -16,7 +24,7 @@
Example:
sata0: sata@ee300000 {
- compatible = "renesas,sata-r8a7791";
+ compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata";
reg = <0 0xee300000 0 0x2000>;
interrupt-parent = <&gic>;
interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/Documentation/devicetree/bindings/clock/img,boston-clock.txt b/Documentation/devicetree/bindings/clock/img,boston-clock.txt
new file mode 100644
index 0000000..7bc5e9f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/img,boston-clock.txt
@@ -0,0 +1,31 @@
+Binding for Imagination Technologies MIPS Boston clock sources.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The device node must be a child node of the syscon node corresponding to the
+Boston system's platform registers.
+
+Required properties:
+- compatible : Should be "img,boston-clock".
+- #clock-cells : Should be set to 1.
+ Values available for clock consumers can be found in the header file:
+ <dt-bindings/clock/boston-clock.h>
+
+Example:
+
+ system-controller@17ffd000 {
+ compatible = "img,boston-platform-regs", "syscon";
+ reg = <0x17ffd000 0x1000>;
+
+ clk_boston: clock {
+ compatible = "img,boston-clock";
+ #clock-cells = <1>;
+ };
+ };
+
+ uart0: uart@17ffe000 {
+ /* ... */
+ clocks = <&clk_boston BOSTON_CLK_SYS>;
+ };
diff --git a/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt b/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt
index f69773f..941bb6a 100644
--- a/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt
+++ b/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt
@@ -8,7 +8,6 @@
Optional properties:
- clocks: Reference to the crypto engine clock.
-- dma-mask: The address mask limitation. Defaults to 64.
Example:
@@ -24,6 +23,5 @@
interrupt-names = "mem", "ring0", "ring1", "ring2", "ring3",
"eip";
clocks = <&cpm_syscon0 1 26>;
- dma-mask = <0xff 0xffffffff>;
status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-exar.txt b/Documentation/devicetree/bindings/gpio/gpio-exar.txt
new file mode 100644
index 0000000..4540d61
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-exar.txt
@@ -0,0 +1,5 @@
+Exportable MPIO interface of Exar UART chips
+
+Required properties of the device:
+ - exar,first-pin: first exportable pins (0..15)
+ - ngpios: number of exportable pins (1..16)
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt
index d3b6e1a4..5aa5926 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt
@@ -40,7 +40,7 @@
Example for a Mali-T760:
gpu@ffa30000 {
- compatible = "rockchip,rk3288-mali", "arm,mali-t760", "arm,mali-midgard";
+ compatible = "rockchip,rk3288-mali", "arm,mali-t760";
reg = <0xffa30000 0x10000>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
new file mode 100644
index 0000000..bd6480b
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
@@ -0,0 +1,48 @@
+Device tree configuration for the I2C busses on the AST24XX and AST25XX SoCs.
+
+Required Properties:
+- #address-cells : should be 1
+- #size-cells : should be 0
+- reg : address offset and range of bus
+- compatible : should be "aspeed,ast2400-i2c-bus"
+ or "aspeed,ast2500-i2c-bus"
+- clocks : root clock of bus, should reference the APB
+ clock
+- interrupts : interrupt number
+- interrupt-parent : interrupt controller for bus, should reference a
+ aspeed,ast2400-i2c-ic or aspeed,ast2500-i2c-ic
+ interrupt controller
+
+Optional Properties:
+- bus-frequency : frequency of the bus clock in Hz defaults to 100 kHz when not
+ specified
+- multi-master : states that there is another master active on this bus.
+
+Example:
+
+i2c {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1e78a000 0x1000>;
+
+ i2c_ic: interrupt-controller@0 {
+ #interrupt-cells = <1>;
+ compatible = "aspeed,ast2400-i2c-ic";
+ reg = <0x0 0x40>;
+ interrupts = <12>;
+ interrupt-controller;
+ };
+
+ i2c0: i2c-bus@40 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0x40 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <0>;
+ interrupt-parent = <&i2c_ic>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
index fee26dc..fbb0a6d 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
@@ -20,7 +20,7 @@
- i2c-sda-falling-time-ns : should contain the SDA falling time in nanoseconds.
This value which is by default 300ns is used to compute the tHIGH period.
-Example :
+Examples :
i2c@f0000 {
#address-cells = <1>;
@@ -43,3 +43,17 @@
i2c-sda-falling-time-ns = <300>;
i2c-scl-falling-time-ns = <300>;
};
+
+ i2c@1120000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2000 0x100>;
+ clock-frequency = <400000>;
+ clocks = <&i2cclk>;
+ interrupts = <0>;
+
+ eeprom@64 {
+ compatible = "linux,slave-24c02";
+ reg = <0x40000064>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-pca-platform.txt b/Documentation/devicetree/bindings/i2c/i2c-pca-platform.txt
new file mode 100644
index 0000000..f1f3876
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-pca-platform.txt
@@ -0,0 +1,29 @@
+* NXP PCA PCA9564/PCA9665 I2C controller
+
+The PCA9564/PCA9665 serves as an interface between most standard
+parallel-bus microcontrollers/microprocessors and the serial I2C-bus
+and allows the parallel bus system to communicate bi-directionally
+with the I2C-bus.
+
+Required properties :
+
+ - reg : Offset and length of the register set for the device
+ - compatible : one of "nxp,pca9564" or "nxp,pca9665"
+
+Optional properties
+ - interrupts : the interrupt number
+ - interrupt-parent : the phandle for the interrupt controller.
+ If an interrupt is not specified polling will be used.
+ - reset-gpios : gpio specifier for gpio connected to RESET_N pin. As the line
+ is active low, it should be marked GPIO_ACTIVE_LOW.
+ - clock-frequency : I2C bus frequency.
+
+Example:
+ i2c0: i2c@80000 {
+ compatible = "nxp,pca9564";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x80000 0x4>;
+ reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ clock-frequency = <100000>;
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-zx2967.txt b/Documentation/devicetree/bindings/i2c/i2c-zx2967.txt
new file mode 100644
index 0000000..cb806d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-zx2967.txt
@@ -0,0 +1,22 @@
+ZTE zx2967 I2C controller
+
+Required properties:
+ - compatible: must be "zte,zx296718-i2c"
+ - reg: physical address and length of the device registers
+ - interrupts: a single interrupt specifier
+ - clocks: clock for the device
+ - #address-cells: should be <1>
+ - #size-cells: should be <0>
+ - clock-frequency: the desired I2C bus clock frequency.
+
+Examples:
+
+ i2c@112000 {
+ compatible = "zte,zx296718-i2c";
+ reg = <0x00112000 0x1000>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc24m>;
+ #address-cells = <1>
+ #size-cells = <0>;
+ clock-frequency = <1600000>;
+ };
diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt
index be57550..c9abbf3 100644
--- a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt
+++ b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt
@@ -26,6 +26,12 @@
* "priq" - PRI Queue not empty
* "cmdq-sync" - CMD_SYNC complete
* "gerror" - Global Error activated
+ * "combined" - The combined interrupt is optional,
+ and should only be provided if the
+ hardware supports just a single,
+ combined interrupt line.
+ If provided, then the combined interrupt
+ will be used in preference to any others.
- #iommu-cells : See the generic IOMMU binding described in
devicetree/bindings/pci/pci-iommu.txt
@@ -49,6 +55,12 @@
- hisilicon,broken-prefetch-cmd
: Avoid sending CMD_PREFETCH_* commands to the SMMU.
+- cavium,cn9900-broken-page1-regspace
+ : Replaces all page 1 offsets used for EVTQ_PROD/CONS,
+ PRIQ_PROD/CONS register access with page 0 offsets.
+ Set for Cavium ThunderX2 silicon that doesn't support
+ SMMU page1 register space.
+
** Example
smmu@2b400000 {
diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
index aad9844..a58c173 100644
--- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
@@ -78,7 +78,6 @@
};
dwmmc0@12200000 {
- num-slots = <1>;
cap-mmc-highspeed;
cap-sd-highspeed;
broken-cd;
diff --git a/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt
index 85de99f..c54e577 100644
--- a/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt
@@ -24,6 +24,5 @@
fifo-depth = <0x20>;
bus-width = <4>;
- num-slots = <1>;
disable-wp;
};
diff --git a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
index 8af1afc..07242d1 100644
--- a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
@@ -36,7 +36,6 @@
/* Board portion */
dwmmc0@fcd03000 {
- num-slots = <1>;
vmmc-supply = <&ldo12>;
fifo-depth = <0x100>;
pinctrl-names = "default";
@@ -52,7 +51,6 @@
dwmmc_1: dwmmc1@f723e000 {
compatible = "hisilicon,hi6220-dw-mshc";
- num-slots = <0x1>;
bus-width = <0x4>;
disable-wp;
cap-sd-highspeed;
diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
index 9cb55ca..ef3e5f1 100644
--- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
@@ -12,12 +12,12 @@
* #address-cells: should be 1.
* #size-cells: should be 0.
-# Slots: The slot specific information are contained within child-nodes with
- each child-node representing a supported slot. There should be atleast one
- child node representing a card slot. The name of the child node representing
- the slot is recommended to be slot@n where n is the unique number of the slot
- connected to the controller. The following are optional properties which
- can be included in the slot child node.
+# Slots (DEPRECATED): The slot specific information are contained within
+ child-nodes with each child-node representing a supported slot. There should
+ be atleast one child node representing a card slot. The name of the child node
+ representing the slot is recommended to be slot@n where n is the unique number
+ of the slot connected to the controller. The following are optional properties
+ which can be included in the slot child node.
* reg: specifies the physical slot number. The valid values of this
property is 0 to (num-slots -1), where num-slots is the value
@@ -63,7 +63,7 @@
clock(cclk_out). If it's not specified, max is 200MHZ and min is 400KHz by default.
(Use the "max-frequency" instead of "clock-freq-min-max".)
-* num-slots: specifies the number of slots supported by the controller.
+* num-slots (DEPRECATED): specifies the number of slots supported by the controller.
The number of physical slots actually used could be equal or less than the
value specified by num-slots. If this property is not specified, the value
of num-slot property is assumed to be 1.
@@ -124,7 +124,6 @@
dwmmc0@12200000 {
clock-frequency = <400000000>;
clock-freq-min-max = <400000 200000000>;
- num-slots = <1>;
broken-cd;
fifo-depth = <0x80>;
card-detect-delay = <200>;
@@ -139,7 +138,6 @@
dwmmc0@12200000 {
clock-frequency = <400000000>;
clock-freq-min-max = <400000 200000000>;
- num-slots = <1>;
broken-cd;
fifo-depth = <0x80>;
card-detect-delay = <200>;
diff --git a/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt
index eaade0e..906819a 100644
--- a/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt
@@ -25,7 +25,6 @@
clock-frequency = <50000000>;
clocks = <&topcrm SD0_AHB>, <&topcrm SD0_WCLK>;
clock-names = "biu", "ciu";
- num-slots = <1>;
max-frequency = <50000000>;
cap-sdio-irq;
cap-sd-highspeed;
diff --git a/Documentation/devicetree/bindings/mtd/denali-nand.txt b/Documentation/devicetree/bindings/mtd/denali-nand.txt
index e593bbe..504291d 100644
--- a/Documentation/devicetree/bindings/mtd/denali-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/denali-nand.txt
@@ -3,10 +3,23 @@
Required properties:
- compatible : should be one of the following:
"altr,socfpga-denali-nand" - for Altera SOCFPGA
+ "socionext,uniphier-denali-nand-v5a" - for Socionext UniPhier (v5a)
+ "socionext,uniphier-denali-nand-v5b" - for Socionext UniPhier (v5b)
- reg : should contain registers location and length for data and reg.
- reg-names: Should contain the reg names "nand_data" and "denali_reg"
- interrupts : The interrupt number.
+Optional properties:
+ - nand-ecc-step-size: see nand.txt for details. If present, the value must be
+ 512 for "altr,socfpga-denali-nand"
+ 1024 for "socionext,uniphier-denali-nand-v5a"
+ 1024 for "socionext,uniphier-denali-nand-v5b"
+ - nand-ecc-strength: see nand.txt for details. Valid values are:
+ 8, 15 for "altr,socfpga-denali-nand"
+ 8, 16, 24 for "socionext,uniphier-denali-nand-v5a"
+ 8, 16 for "socionext,uniphier-denali-nand-v5b"
+ - nand-ecc-maximize: see nand.txt for details
+
The device tree may optionally contain sub-nodes describing partitions of the
address space. See partition.txt for more detail.
diff --git a/Documentation/devicetree/bindings/mtd/elm.txt b/Documentation/devicetree/bindings/mtd/elm.txt
index 8c1528c..59ddc61 100644
--- a/Documentation/devicetree/bindings/mtd/elm.txt
+++ b/Documentation/devicetree/bindings/mtd/elm.txt
@@ -1,7 +1,7 @@
Error location module
Required properties:
-- compatible: Must be "ti,am33xx-elm"
+- compatible: Must be "ti,am3352-elm"
- reg: physical base address and size of the registers map.
- interrupts: Interrupt number for the elm.
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
index 174f68c..dd55904 100644
--- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
@@ -5,7 +5,7 @@
All timing relevant properties as well as generic gpmc child properties are
explained in a separate documents - please refer to
-Documentation/devicetree/bindings/bus/ti-gpmc.txt
+Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
For NAND specific properties such as ECC modes or bus width, please refer to
Documentation/devicetree/bindings/mtd/nand.txt
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt b/Documentation/devicetree/bindings/mtd/gpmc-nor.txt
index 4828c17..131d3a74 100644
--- a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmc-nor.txt
@@ -5,7 +5,7 @@
All timing relevant properties as well as generic GPMC child properties are
explained in a separate documents. Please refer to
-Documentation/devicetree/bindings/bus/ti-gpmc.txt
+Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
Required properties:
- bank-width: Width of NOR flash in bytes. GPMC supports 8-bit and
@@ -28,7 +28,7 @@
Optional properties:
- gpmc,XXX Additional GPMC timings and settings parameters. See
- Documentation/devicetree/bindings/bus/ti-gpmc.txt
+ Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
Optional properties for partition table parsing:
- #address-cells: should be set to 1
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt
index 5d8fa52..b6e8bfd 100644
--- a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt
@@ -5,7 +5,7 @@
All timing relevant properties as well as generic gpmc child properties are
explained in a separate documents - please refer to
-Documentation/devicetree/bindings/bus/ti-gpmc.txt
+Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
Required properties:
diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
index d02acaf..b289ef3 100644
--- a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
@@ -4,7 +4,12 @@
NAND flash chips.
Required properties:
- - compatible : should be "fsl,<chip>-gpmi-nand"
+ - compatible : should be "fsl,<chip>-gpmi-nand", chip can be:
+ * imx23
+ * imx28
+ * imx6q
+ * imx6sx
+ * imx7d
- reg : should contain registers location and length for gpmi and bch.
- reg-names: Should contain the reg names "gpmi-nand" and "bch"
- interrupts : BCH interrupt number.
@@ -13,6 +18,13 @@
and GPMI DMA channel ID.
Refer to dma.txt and fsl-mxs-dma.txt for details.
- dma-names: Must be "rx-tx".
+ - clocks : clocks phandle and clock specifier corresponding to each clock
+ specified in clock-names.
+ - clock-names : The "gpmi_io" clock is always required. Which clocks are
+ exactly required depends on chip:
+ * imx23/imx28 : "gpmi_io"
+ * imx6q/sx : "gpmi_io", "gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch"
+ * imx7d : "gpmi_io", "gpmi_bch_apb"
Optional properties:
- nand-on-flash-bbt: boolean to enable on flash bbt option if not
diff --git a/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt b/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt
new file mode 100644
index 0000000..7328eb9
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt
@@ -0,0 +1,18 @@
+* MTD SPI driver for Microchip 23K256 (and similar) serial SRAM
+
+Required properties:
+- #address-cells, #size-cells : Must be present if the device has sub-nodes
+ representing partitions.
+- compatible : Must be one of "microchip,mchp23k256" or "microchip,mchp23lcv1024"
+- reg : Chip-Select number
+- spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at
+
+Example:
+
+ spi-sram@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "microchip,mchp23k256";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ };
diff --git a/Documentation/devicetree/bindings/mtd/mtk-nand.txt b/Documentation/devicetree/bindings/mtd/mtk-nand.txt
index 069c192..dbf9e05 100644
--- a/Documentation/devicetree/bindings/mtd/mtk-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/mtk-nand.txt
@@ -12,7 +12,8 @@
The first part of NFC is NAND Controller Interface (NFI) HW.
Required NFI properties:
-- compatible: Should be "mediatek,mtxxxx-nfc".
+- compatible: Should be one of "mediatek,mt2701-nfc",
+ "mediatek,mt2712-nfc".
- reg: Base physical address and size of NFI.
- interrupts: Interrupts of NFI.
- clocks: NFI required clocks.
@@ -141,7 +142,7 @@
==============
Required BCH properties:
-- compatible: Should be "mediatek,mtxxxx-ecc".
+- compatible: Should be one of "mediatek,mt2701-ecc", "mediatek,mt2712-ecc".
- reg: Base physical address and size of ECC.
- interrupts: Interrupts of ECC.
- clocks: ECC required clocks.
diff --git a/Documentation/devicetree/bindings/mtd/nand.txt b/Documentation/devicetree/bindings/mtd/nand.txt
index b056016..133f381 100644
--- a/Documentation/devicetree/bindings/mtd/nand.txt
+++ b/Documentation/devicetree/bindings/mtd/nand.txt
@@ -21,7 +21,7 @@
- nand-ecc-mode : String, operation mode of the NAND ecc mode.
Supported values are: "none", "soft", "hw", "hw_syndrome",
- "hw_oob_first".
+ "hw_oob_first", "on-die".
Deprecated values:
"soft_bch": use "soft" and nand-ecc-algo instead
- nand-ecc-algo: string, algorithm of NAND ECC.
diff --git a/Documentation/devicetree/bindings/mtd/partition.txt b/Documentation/devicetree/bindings/mtd/partition.txt
index 81a224d..36f3b76 100644
--- a/Documentation/devicetree/bindings/mtd/partition.txt
+++ b/Documentation/devicetree/bindings/mtd/partition.txt
@@ -1,29 +1,49 @@
-Representing flash partitions in devicetree
+Flash partitions in device tree
+===============================
-Partitions can be represented by sub-nodes of an mtd device. This can be used
+Flash devices can be partitioned into one or more functional ranges (e.g. "boot
+code", "nvram", "kernel").
+
+Different devices may be partitioned in a different ways. Some may use a fixed
+flash layout set at production time. Some may use on-flash table that describes
+the geometry and naming/purpose of each functional region. It is also possible
+to see these methods mixed.
+
+To assist system software in locating partitions, we allow describing which
+method is used for a given flash device. To describe the method there should be
+a subnode of the flash device that is named 'partitions'. It must have a
+'compatible' property, which is used to identify the method to use.
+
+We currently only document a binding for fixed layouts.
+
+
+Fixed Partitions
+================
+
+Partitions can be represented by sub-nodes of a flash device. This can be used
on platforms which have strong conventions about which portions of a flash are
used for what purposes, but which don't use an on-flash partition table such
as RedBoot.
-The partition table should be a subnode of the mtd node and should be named
+The partition table should be a subnode of the flash node and should be named
'partitions'. This node should have the following property:
- compatible : (required) must be "fixed-partitions"
Partitions are then defined in subnodes of the partitions node.
-For backwards compatibility partitions as direct subnodes of the mtd device are
+For backwards compatibility partitions as direct subnodes of the flash device are
supported. This use is discouraged.
NOTE: also for backwards compatibility, direct subnodes that have a compatible
string are not considered partitions, as they may be used for other bindings.
#address-cells & #size-cells must both be present in the partitions subnode of the
-mtd device. There are two valid values for both:
+flash device. There are two valid values for both:
<1>: for partitions that require a single 32-bit cell to represent their
size/address (aka the value is below 4 GiB)
<2>: for partitions that require two 32-bit cells to represent their
size/address (aka the value is 4 GiB or greater).
Required properties:
-- reg : The partition's offset and size within the mtd bank.
+- reg : The partition's offset and size within the flash
Optional properties:
- label : The label / name for this partition. If omitted, the label is taken
diff --git a/Documentation/devicetree/bindings/net/brcm,amac.txt b/Documentation/devicetree/bindings/net/brcm,amac.txt
index 2fefa1a..ad16c1f 100644
--- a/Documentation/devicetree/bindings/net/brcm,amac.txt
+++ b/Documentation/devicetree/bindings/net/brcm,amac.txt
@@ -11,6 +11,7 @@
- reg-names: Names of the registers.
"amac_base": Address and length of the GMAC registers
"idm_base": Address and length of the GMAC IDM registers
+ (required for NSP and Northstar2)
"nicpm_base": Address and length of the NIC Port Manager
registers (required for Northstar2)
- interrupts: Interrupt number
diff --git a/Documentation/devicetree/bindings/net/brcm,bgmac-nsp.txt b/Documentation/devicetree/bindings/net/brcm,bgmac-nsp.txt
deleted file mode 100644
index 022946c..0000000
--- a/Documentation/devicetree/bindings/net/brcm,bgmac-nsp.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Broadcom GMAC Ethernet Controller Device Tree Bindings
--------------------------------------------------------------
-
-Required properties:
- - compatible: "brcm,bgmac-nsp"
- - reg: Address and length of the GMAC registers,
- Address and length of the GMAC IDM registers
- - reg-names: Names of the registers. Must have both "gmac_base" and
- "idm_base"
- - interrupts: Interrupt number
-
-Optional properties:
-- mac-address: See ethernet.txt file in the same directory
-
-Examples:
-
-gmac0: ethernet@18022000 {
- compatible = "brcm,bgmac-nsp";
- reg = <0x18022000 0x1000>,
- <0x18110000 0x1000>;
- reg-names = "gmac_base", "idm_base";
- interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
-};
diff --git a/Documentation/devicetree/bindings/net/gpmc-eth.txt b/Documentation/devicetree/bindings/net/gpmc-eth.txt
index ace4a64..f7da3d7 100644
--- a/Documentation/devicetree/bindings/net/gpmc-eth.txt
+++ b/Documentation/devicetree/bindings/net/gpmc-eth.txt
@@ -9,7 +9,7 @@
All timing relevant properties as well as generic GPMC child properties are
explained in a separate documents. Please refer to
-Documentation/devicetree/bindings/bus/ti-gpmc.txt
+Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
For the properties relevant to the ethernet controller connected to the GPMC
refer to the binding documentation of the device. For example, the documentation
@@ -43,7 +43,7 @@
Optional properties:
- gpmc,XXX Additional GPMC timings and settings parameters. See
- Documentation/devicetree/bindings/bus/ti-gpmc.txt
+ Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
Example:
diff --git a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt
index 194926f..1ff02afd 100644
--- a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt
+++ b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt
@@ -4,7 +4,7 @@
- compatible: Should be one of the following.
- "rockchip,rk3066a-efuse" - for RK3066a SoCs.
- "rockchip,rk3188-efuse" - for RK3188 SoCs.
- - "rockchip,rk322x-efuse" - for RK322x SoCs.
+ - "rockchip,rk3228-efuse" - for RK3228 SoCs.
- "rockchip,rk3288-efuse" - for RK3288 SoCs.
- "rockchip,rk3399-efuse" - for RK3399 SoCs.
- reg: Should contain the registers location and exact eFuse size
diff --git a/Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt b/Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt
index 07590bc..7c04e22 100644
--- a/Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt
+++ b/Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt
@@ -1,13 +1,20 @@
-* Broadcom Digital Timing Engine(DTE) based PTP clock driver
+* Broadcom Digital Timing Engine(DTE) based PTP clock
Required properties:
-- compatible: should be "brcm,ptp-dte"
+- compatible: should contain the core compatibility string
+ and the SoC compatibility string. The SoC
+ compatibility string is to handle SoC specific
+ hardware differences.
+ Core compatibility string:
+ "brcm,ptp-dte"
+ SoC compatibility strings:
+ "brcm,iproc-ptp-dte" - for iproc based SoC's
- reg: address and length of the DTE block's NCO registers
Example:
-ptp_dte: ptp_dte@180af650 {
- compatible = "brcm,ptp-dte";
+ptp: ptp-dte@180af650 {
+ compatible = "brcm,iproc-ptp-dte", "brcm,ptp-dte";
reg = <0x180af650 0x10>;
status = "okay";
};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-meson.txt b/Documentation/devicetree/bindings/pwm/pwm-meson.txt
index 5376a44..5b07beb 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-meson.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-meson.txt
@@ -2,7 +2,9 @@
============================
Required properties:
-- compatible: Shall contain "amlogic,meson8b-pwm" or "amlogic,meson-gxbb-pwm".
+- compatible: Shall contain "amlogic,meson8b-pwm"
+ or "amlogic,meson-gxbb-pwm"
+ or "amlogic,meson-gxbb-ao-pwm"
- #pwm-cells: Should be 3. See pwm.txt in this directory for a description of
the cells format.
diff --git a/Documentation/devicetree/bindings/pwm/pwm-stm32.txt b/Documentation/devicetree/bindings/pwm/pwm-stm32.txt
index 6dd0403..3e6d550 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-stm32.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-stm32.txt
@@ -24,7 +24,7 @@
compatible = "st,stm32-timers";
reg = <0x40010000 0x400>;
clocks = <&rcc 0 160>;
- clock-names = "clk_int";
+ clock-names = "int";
pwm {
compatible = "st,stm32-pwm";
diff --git a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt
index d6de643..7e94b80 100644
--- a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt
+++ b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt
@@ -8,6 +8,7 @@
- "renesas,pwm-r8a7791": for R-Car M2-W
- "renesas,pwm-r8a7794": for R-Car E2
- "renesas,pwm-r8a7795": for R-Car H3
+ - "renesas,pwm-r8a7796": for R-Car M3-W
- reg: base address and length of the registers block for the PWM.
- #pwm-cells: should be 2. See pwm.txt in this directory for a description of
the cells format.
diff --git a/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.txt b/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.txt
new file mode 100644
index 0000000..1d990bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.txt
@@ -0,0 +1,22 @@
+Broadcom STB wake-up Timer
+
+The Broadcom STB wake-up timer provides a 27Mhz resolution timer, with the
+ability to wake up the system from low-power suspend/standby modes.
+
+Required properties:
+- compatible : should contain "brcm,brcmstb-waketimer"
+- reg : the register start and length for the WKTMR block
+- interrupts : The TIMER interrupt
+- interrupt-parent: The phandle to the Always-On (AON) Power Management (PM) L2
+ interrupt controller node
+- clocks : The phandle to the UPG fixed clock (27Mhz domain)
+
+Example:
+
+waketimer@f0411580 {
+ compatible = "brcm,brcmstb-waketimer";
+ reg = <0xf0411580 0x14>;
+ interrupts = <0x3>;
+ interrupt-parent = <&aon_pm_l2_intc>;
+ clocks = <&upg_fixed>;
+};
diff --git a/Documentation/devicetree/bindings/rtc/cortina,gemini.txt b/Documentation/devicetree/bindings/rtc/cortina,gemini.txt
deleted file mode 100644
index 4ce4e79..0000000
--- a/Documentation/devicetree/bindings/rtc/cortina,gemini.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-* Cortina Systems Gemini RTC
-
-Gemini SoC real-time clock.
-
-Required properties:
-- compatible : Should be "cortina,gemini-rtc"
-
-Examples:
-
-rtc@45000000 {
- compatible = "cortina,gemini-rtc";
- reg = <0x45000000 0x100>;
- interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
-};
diff --git a/Documentation/devicetree/bindings/rtc/faraday,ftrtc010.txt b/Documentation/devicetree/bindings/rtc/faraday,ftrtc010.txt
new file mode 100644
index 0000000..e3938f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/faraday,ftrtc010.txt
@@ -0,0 +1,28 @@
+* Faraday Technology FTRTC010 Real Time Clock
+
+This RTC appears in for example the Storlink Gemini family of
+SoCs.
+
+Required properties:
+- compatible : Should be one of:
+ "faraday,ftrtc010"
+ "cortina,gemini-rtc", "faraday,ftrtc010"
+
+Optional properties:
+- clocks: when present should contain clock references to the
+ PCLK and EXTCLK clocks. Faraday calls the later CLK1HZ and
+ says the clock should be 1 Hz, but implementers actually seem
+ to choose different clocks here, like Cortina who chose
+ 32768 Hz (a typical low-power clock).
+- clock-names: should name the clocks "PCLK" and "EXTCLK"
+ respectively.
+
+Examples:
+
+rtc@45000000 {
+ compatible = "cortina,gemini-rtc";
+ reg = <0x45000000 0x100>;
+ interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&foo 0>, <&foo 1>;
+ clock-names = "PCLK", "EXTCLK";
+};
diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt
index e2837b9..0a4c371 100644
--- a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt
+++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt
@@ -1,17 +1,25 @@
STM32 Real Time Clock
Required properties:
-- compatible: "st,stm32-rtc".
+- compatible: can be either "st,stm32-rtc" or "st,stm32h7-rtc", depending on
+ the device is compatible with stm32(f4/f7) or stm32h7.
- reg: address range of rtc register set.
-- clocks: reference to the clock entry ck_rtc.
+- clocks: can use up to two clocks, depending on part used:
+ - "rtc_ck": RTC clock source.
+ It is required on stm32(f4/f7) and stm32h7.
+ - "pclk": RTC APB interface clock.
+ It is not present on stm32(f4/f7).
+ It is required on stm32h7.
+- clock-names: must be "rtc_ck" and "pclk".
+ It is required only on stm32h7.
- interrupt-parent: phandle for the interrupt controller.
- interrupts: rtc alarm interrupt.
- st,syscfg: phandle for pwrcfg, mandatory to disable/enable backup domain
(RTC registers) write protection.
-Optional properties (to override default ck_rtc parent clock):
-- assigned-clocks: reference to the ck_rtc clock entry.
-- assigned-clock-parents: phandle of the new parent clock of ck_rtc.
+Optional properties (to override default rtc_ck parent clock):
+- assigned-clocks: reference to the rtc_ck clock entry.
+- assigned-clock-parents: phandle of the new parent clock of rtc_ck.
Example:
@@ -25,3 +33,17 @@
interrupts = <17 1>;
st,syscfg = <&pwrcfg>;
};
+
+ rtc: rtc@58004000 {
+ compatible = "st,stm32h7-rtc";
+ reg = <0x58004000 0x400>;
+ clocks = <&rcc RTCAPB_CK>, <&rcc RTC_CK>;
+ clock-names = "pclk", "rtc_ck";
+ assigned-clocks = <&rcc RTC_CK>;
+ assigned-clock-parents = <&rcc LSE_CK>;
+ interrupt-parent = <&exti>;
+ interrupts = <17 1>;
+ interrupt-names = "alarm";
+ st,syscfg = <&pwrcfg>;
+ status = "disabled";
+ };
diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt
index e6b5724..574c3a2 100644
--- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt
+++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt
@@ -9,7 +9,6 @@
- fsl,irda-mode : Indicate the uart supports irda mode
- fsl,dte-mode : Indicate the uart works in DTE mode. The uart works
in DCE mode by default.
-- fsl,dma-size : Indicate the size of the DMA buffer and its periods
Please check Documentation/devicetree/bindings/serial/serial.txt
for the complete list of generic properties.
@@ -29,5 +28,4 @@
interrupts = <31>;
uart-has-rtscts;
fsl,dte-mode;
- fsl,dma-size = <1024 4>;
};
diff --git a/Documentation/digsig.txt b/Documentation/digsig.txt
index 3f68288..f6a8902 100644
--- a/Documentation/digsig.txt
+++ b/Documentation/digsig.txt
@@ -1,13 +1,20 @@
+==================================
Digital Signature Verification API
+==================================
-CONTENTS
-
-1. Introduction
-2. API
-3. User-space utilities
+:Author: Dmitry Kasatkin
+:Date: 06.10.2011
-1. Introduction
+.. CONTENTS
+
+ 1. Introduction
+ 2. API
+ 3. User-space utilities
+
+
+Introduction
+============
Digital signature verification API provides a method to verify digital signature.
Currently digital signatures are used by the IMA/EVM integrity protection subsystem.
@@ -17,25 +24,25 @@
memory allocation errors handling, has been refactored according to kernel
coding style, and checkpatch.pl reported errors and warnings have been fixed.
-Public key and signature consist of header and MPIs.
+Public key and signature consist of header and MPIs::
-struct pubkey_hdr {
- uint8_t version; /* key format version */
- time_t timestamp; /* key made, always 0 for now */
- uint8_t algo;
- uint8_t nmpi;
- char mpi[0];
-} __packed;
+ struct pubkey_hdr {
+ uint8_t version; /* key format version */
+ time_t timestamp; /* key made, always 0 for now */
+ uint8_t algo;
+ uint8_t nmpi;
+ char mpi[0];
+ } __packed;
-struct signature_hdr {
- uint8_t version; /* signature format version */
- time_t timestamp; /* signature made */
- uint8_t algo;
- uint8_t hash;
- uint8_t keyid[8];
- uint8_t nmpi;
- char mpi[0];
-} __packed;
+ struct signature_hdr {
+ uint8_t version; /* signature format version */
+ time_t timestamp; /* signature made */
+ uint8_t algo;
+ uint8_t hash;
+ uint8_t keyid[8];
+ uint8_t nmpi;
+ char mpi[0];
+ } __packed;
keyid equals to SHA1[12-19] over the total key content.
Signature header is used as an input to generate a signature.
@@ -43,31 +50,33 @@
It protects timestamp from been changed and can be used for rollback
protection.
-2. API
+API
+===
-API currently includes only 1 function:
+API currently includes only 1 function::
digsig_verify() - digital signature verification with public key
-/**
- * digsig_verify() - digital signature verification with public key
- * @keyring: keyring to search key in
- * @sig: digital signature
- * @sigen: length of the signature
- * @data: data
- * @datalen: length of the data
- * @return: 0 on success, -EINVAL otherwise
- *
- * Verifies data integrity against digital signature.
- * Currently only RSA is supported.
- * Normally hash of the content is used as a data for this function.
- *
- */
-int digsig_verify(struct key *keyring, const char *sig, int siglen,
- const char *data, int datalen);
+ /**
+ * digsig_verify() - digital signature verification with public key
+ * @keyring: keyring to search key in
+ * @sig: digital signature
+ * @sigen: length of the signature
+ * @data: data
+ * @datalen: length of the data
+ * @return: 0 on success, -EINVAL otherwise
+ *
+ * Verifies data integrity against digital signature.
+ * Currently only RSA is supported.
+ * Normally hash of the content is used as a data for this function.
+ *
+ */
+ int digsig_verify(struct key *keyring, const char *sig, int siglen,
+ const char *data, int datalen);
-3. User-space utilities
+User-space utilities
+====================
The signing and key management utilities evm-utils provide functionality
to generate signatures, to load keys into the kernel keyring.
@@ -75,22 +84,18 @@
When the key is added to the kernel keyring, the keyid defines the name
of the key: 5D2B05FC633EE3E8 in the example bellow.
-Here is example output of the keyctl utility.
+Here is example output of the keyctl utility::
-$ keyctl show
-Session Keyring
- -3 --alswrv 0 0 keyring: _ses
-603976250 --alswrv 0 -1 \_ keyring: _uid.0
-817777377 --alswrv 0 0 \_ user: kmk
-891974900 --alswrv 0 0 \_ encrypted: evm-key
-170323636 --alswrv 0 0 \_ keyring: _module
-548221616 --alswrv 0 0 \_ keyring: _ima
-128198054 --alswrv 0 0 \_ keyring: _evm
+ $ keyctl show
+ Session Keyring
+ -3 --alswrv 0 0 keyring: _ses
+ 603976250 --alswrv 0 -1 \_ keyring: _uid.0
+ 817777377 --alswrv 0 0 \_ user: kmk
+ 891974900 --alswrv 0 0 \_ encrypted: evm-key
+ 170323636 --alswrv 0 0 \_ keyring: _module
+ 548221616 --alswrv 0 0 \_ keyring: _ima
+ 128198054 --alswrv 0 0 \_ keyring: _evm
-$ keyctl list 128198054
-1 key in keyring:
-620789745: --alswrv 0 0 user: 5D2B05FC633EE3E8
-
-
-Dmitry Kasatkin
-06.10.2011
+ $ keyctl list 128198054
+ 1 key in keyring:
+ 620789745: --alswrv 0 0 user: 5D2B05FC633EE3E8
diff --git a/Documentation/driver-api/basics.rst b/Documentation/driver-api/basics.rst
index 472e7a6..ab82250 100644
--- a/Documentation/driver-api/basics.rst
+++ b/Documentation/driver-api/basics.rst
@@ -106,9 +106,6 @@
.. kernel-doc:: kernel/sys.c
:export:
-.. kernel-doc:: kernel/rcu/srcu.c
- :export:
-
.. kernel-doc:: kernel/rcu/tree.c
:export:
diff --git a/Documentation/driver-api/i2c.rst b/Documentation/driver-api/i2c.rst
index 0bf86a4..7582c07 100644
--- a/Documentation/driver-api/i2c.rst
+++ b/Documentation/driver-api/i2c.rst
@@ -41,5 +41,8 @@
.. kernel-doc:: drivers/i2c/i2c-boardinfo.c
:functions: i2c_register_board_info
-.. kernel-doc:: drivers/i2c/i2c-core.c
+.. kernel-doc:: drivers/i2c/i2c-core-base.c
+ :export:
+
+.. kernel-doc:: drivers/i2c/i2c-core-smbus.c
:export:
diff --git a/Documentation/efi-stub.txt b/Documentation/efi-stub.txt
index e157469..41df801 100644
--- a/Documentation/efi-stub.txt
+++ b/Documentation/efi-stub.txt
@@ -1,5 +1,6 @@
- The EFI Boot Stub
- ---------------------------
+=================
+The EFI Boot Stub
+=================
On the x86 and ARM platforms, a kernel zImage/bzImage can masquerade
as a PE/COFF image, thereby convincing EFI firmware loaders to load
@@ -25,7 +26,8 @@
The EFI boot stub is enabled with the CONFIG_EFI_STUB kernel option.
-**** How to install bzImage.efi
+How to install bzImage.efi
+--------------------------
The bzImage located in arch/x86/boot/bzImage must be copied to the EFI
System Partition (ESP) and renamed with the extension ".efi". Without
@@ -37,14 +39,16 @@
should be copied but not necessarily renamed.
-**** Passing kernel parameters from the EFI shell
+Passing kernel parameters from the EFI shell
+--------------------------------------------
-Arguments to the kernel can be passed after bzImage.efi, e.g.
+Arguments to the kernel can be passed after bzImage.efi, e.g.::
fs0:> bzImage.efi console=ttyS0 root=/dev/sda4
-**** The "initrd=" option
+The "initrd=" option
+--------------------
Like most boot loaders, the EFI stub allows the user to specify
multiple initrd files using the "initrd=" option. This is the only EFI
@@ -54,9 +58,9 @@
The path to the initrd file must be an absolute path from the
beginning of the ESP, relative path names do not work. Also, the path
is an EFI-style path and directory elements must be separated with
-backslashes (\). For example, given the following directory layout,
+backslashes (\). For example, given the following directory layout::
-fs0:>
+ fs0:>
Kernels\
bzImage.efi
initrd-large.img
@@ -66,7 +70,7 @@
initrd-medium.img
to boot with the initrd-large.img file if the current working
-directory is fs0:\Kernels, the following command must be used,
+directory is fs0:\Kernels, the following command must be used::
fs0:\Kernels> bzImage.efi initrd=\Kernels\initrd-large.img
@@ -76,7 +80,8 @@
is passed to bzImage.efi.
-**** The "dtb=" option
+The "dtb=" option
+-----------------
For the ARM and arm64 architectures, we also need to be able to provide a
device tree to the kernel. This is done with the "dtb=" command line option,
diff --git a/Documentation/eisa.txt b/Documentation/eisa.txt
index a55e491..2806e55 100644
--- a/Documentation/eisa.txt
+++ b/Documentation/eisa.txt
@@ -1,4 +1,8 @@
-EISA bus support (Marc Zyngier <maz@wild-wind.fr.eu.org>)
+================
+EISA bus support
+================
+
+:Author: Marc Zyngier <maz@wild-wind.fr.eu.org>
This document groups random notes about porting EISA drivers to the
new EISA/sysfs API.
@@ -14,168 +18,189 @@
most EISA drivers are among the oldest Linux drivers so, as you can
imagine, some dust has settled here over the years.
-The EISA infrastructure is made up of three parts :
+The EISA infrastructure is made up of three parts:
- The bus code implements most of the generic code. It is shared
- among all the architectures that the EISA code runs on. It
- implements bus probing (detecting EISA cards available on the bus),
- allocates I/O resources, allows fancy naming through sysfs, and
- offers interfaces for driver to register.
+ among all the architectures that the EISA code runs on. It
+ implements bus probing (detecting EISA cards available on the bus),
+ allocates I/O resources, allows fancy naming through sysfs, and
+ offers interfaces for driver to register.
- The bus root driver implements the glue between the bus hardware
- and the generic bus code. It is responsible for discovering the
- device implementing the bus, and setting it up to be latter probed
- by the bus code. This can go from something as simple as reserving
- an I/O region on x86, to the rather more complex, like the hppa
- EISA code. This is the part to implement in order to have EISA
- running on an "new" platform.
+ and the generic bus code. It is responsible for discovering the
+ device implementing the bus, and setting it up to be latter probed
+ by the bus code. This can go from something as simple as reserving
+ an I/O region on x86, to the rather more complex, like the hppa
+ EISA code. This is the part to implement in order to have EISA
+ running on an "new" platform.
- The driver offers the bus a list of devices that it manages, and
- implements the necessary callbacks to probe and release devices
- whenever told to.
+ implements the necessary callbacks to probe and release devices
+ whenever told to.
Every function/structure below lives in <linux/eisa.h>, which depends
heavily on <linux/device.h>.
-** Bus root driver :
+Bus root driver
+===============
-int eisa_root_register (struct eisa_root_device *root);
+::
+
+ int eisa_root_register (struct eisa_root_device *root);
The eisa_root_register function is used to declare a device as the
root of an EISA bus. The eisa_root_device structure holds a reference
-to this device, as well as some parameters for probing purposes.
+to this device, as well as some parameters for probing purposes::
-struct eisa_root_device {
- struct device *dev; /* Pointer to bridge device */
- struct resource *res;
- unsigned long bus_base_addr;
- int slots; /* Max slot number */
- int force_probe; /* Probe even when no slot 0 */
- u64 dma_mask; /* from bridge device */
- int bus_nr; /* Set by eisa_root_register */
- struct resource eisa_root_res; /* ditto */
-};
+ struct eisa_root_device {
+ struct device *dev; /* Pointer to bridge device */
+ struct resource *res;
+ unsigned long bus_base_addr;
+ int slots; /* Max slot number */
+ int force_probe; /* Probe even when no slot 0 */
+ u64 dma_mask; /* from bridge device */
+ int bus_nr; /* Set by eisa_root_register */
+ struct resource eisa_root_res; /* ditto */
+ };
-node : used for eisa_root_register internal purpose
-dev : pointer to the root device
-res : root device I/O resource
-bus_base_addr : slot 0 address on this bus
-slots : max slot number to probe
-force_probe : Probe even when slot 0 is empty (no EISA mainboard)
-dma_mask : Default DMA mask. Usually the bridge device dma_mask.
-bus_nr : unique bus id, set by eisa_root_register
+============= ======================================================
+node used for eisa_root_register internal purpose
+dev pointer to the root device
+res root device I/O resource
+bus_base_addr slot 0 address on this bus
+slots max slot number to probe
+force_probe Probe even when slot 0 is empty (no EISA mainboard)
+dma_mask Default DMA mask. Usually the bridge device dma_mask.
+bus_nr unique bus id, set by eisa_root_register
+============= ======================================================
-** Driver :
+Driver
+======
-int eisa_driver_register (struct eisa_driver *edrv);
-void eisa_driver_unregister (struct eisa_driver *edrv);
+::
+
+ int eisa_driver_register (struct eisa_driver *edrv);
+ void eisa_driver_unregister (struct eisa_driver *edrv);
Clear enough ?
-struct eisa_device_id {
- char sig[EISA_SIG_LEN];
- unsigned long driver_data;
-};
+::
-struct eisa_driver {
- const struct eisa_device_id *id_table;
- struct device_driver driver;
-};
+ struct eisa_device_id {
+ char sig[EISA_SIG_LEN];
+ unsigned long driver_data;
+ };
-id_table : an array of NULL terminated EISA id strings,
- followed by an empty string. Each string can
- optionally be paired with a driver-dependent value
- (driver_data).
+ struct eisa_driver {
+ const struct eisa_device_id *id_table;
+ struct device_driver driver;
+ };
-driver : a generic driver, such as described in
- Documentation/driver-model/driver.txt. Only .name,
- .probe and .remove members are mandatory.
+=============== ====================================================
+id_table an array of NULL terminated EISA id strings,
+ followed by an empty string. Each string can
+ optionally be paired with a driver-dependent value
+ (driver_data).
-An example is the 3c59x driver :
+driver a generic driver, such as described in
+ Documentation/driver-model/driver.txt. Only .name,
+ .probe and .remove members are mandatory.
+=============== ====================================================
-static struct eisa_device_id vortex_eisa_ids[] = {
- { "TCM5920", EISA_3C592_OFFSET },
- { "TCM5970", EISA_3C597_OFFSET },
- { "" }
-};
+An example is the 3c59x driver::
-static struct eisa_driver vortex_eisa_driver = {
- .id_table = vortex_eisa_ids,
- .driver = {
- .name = "3c59x",
- .probe = vortex_eisa_probe,
- .remove = vortex_eisa_remove
- }
-};
+ static struct eisa_device_id vortex_eisa_ids[] = {
+ { "TCM5920", EISA_3C592_OFFSET },
+ { "TCM5970", EISA_3C597_OFFSET },
+ { "" }
+ };
-** Device :
+ static struct eisa_driver vortex_eisa_driver = {
+ .id_table = vortex_eisa_ids,
+ .driver = {
+ .name = "3c59x",
+ .probe = vortex_eisa_probe,
+ .remove = vortex_eisa_remove
+ }
+ };
+
+Device
+======
The sysfs framework calls .probe and .remove functions upon device
discovery and removal (note that the .remove function is only called
when driver is built as a module).
Both functions are passed a pointer to a 'struct device', which is
-encapsulated in a 'struct eisa_device' described as follows :
+encapsulated in a 'struct eisa_device' described as follows::
-struct eisa_device {
- struct eisa_device_id id;
- int slot;
- int state;
- unsigned long base_addr;
- struct resource res[EISA_MAX_RESOURCES];
- u64 dma_mask;
- struct device dev; /* generic device */
-};
+ struct eisa_device {
+ struct eisa_device_id id;
+ int slot;
+ int state;
+ unsigned long base_addr;
+ struct resource res[EISA_MAX_RESOURCES];
+ u64 dma_mask;
+ struct device dev; /* generic device */
+ };
-id : EISA id, as read from device. id.driver_data is set from the
- matching driver EISA id.
-slot : slot number which the device was detected on
-state : set of flags indicating the state of the device. Current
- flags are EISA_CONFIG_ENABLED and EISA_CONFIG_FORCED.
-res : set of four 256 bytes I/O regions allocated to this device
-dma_mask: DMA mask set from the parent device.
-dev : generic device (see Documentation/driver-model/device.txt)
+======== ============================================================
+id EISA id, as read from device. id.driver_data is set from the
+ matching driver EISA id.
+slot slot number which the device was detected on
+state set of flags indicating the state of the device. Current
+ flags are EISA_CONFIG_ENABLED and EISA_CONFIG_FORCED.
+res set of four 256 bytes I/O regions allocated to this device
+dma_mask DMA mask set from the parent device.
+dev generic device (see Documentation/driver-model/device.txt)
+======== ============================================================
You can get the 'struct eisa_device' from 'struct device' using the
'to_eisa_device' macro.
-** Misc stuff :
+Misc stuff
+==========
-void eisa_set_drvdata (struct eisa_device *edev, void *data);
+::
+
+ void eisa_set_drvdata (struct eisa_device *edev, void *data);
Stores data into the device's driver_data area.
-void *eisa_get_drvdata (struct eisa_device *edev):
+::
+
+ void *eisa_get_drvdata (struct eisa_device *edev):
Gets the pointer previously stored into the device's driver_data area.
-int eisa_get_region_index (void *addr);
+::
+
+ int eisa_get_region_index (void *addr);
Returns the region number (0 <= x < EISA_MAX_RESOURCES) of a given
address.
-** Kernel parameters :
+Kernel parameters
+=================
-eisa_bus.enable_dev :
+eisa_bus.enable_dev
+ A comma-separated list of slots to be enabled, even if the firmware
+ set the card as disabled. The driver must be able to properly
+ initialize the device in such conditions.
-A comma-separated list of slots to be enabled, even if the firmware
-set the card as disabled. The driver must be able to properly
-initialize the device in such conditions.
+eisa_bus.disable_dev
+ A comma-separated list of slots to be enabled, even if the firmware
+ set the card as enabled. The driver won't be called to handle this
+ device.
-eisa_bus.disable_dev :
+virtual_root.force_probe
+ Force the probing code to probe EISA slots even when it cannot find an
+ EISA compliant mainboard (nothing appears on slot 0). Defaults to 0
+ (don't force), and set to 1 (force probing) when either
+ CONFIG_ALPHA_JENSEN or CONFIG_EISA_VLB_PRIMING are set.
-A comma-separated list of slots to be enabled, even if the firmware
-set the card as enabled. The driver won't be called to handle this
-device.
-
-virtual_root.force_probe :
-
-Force the probing code to probe EISA slots even when it cannot find an
-EISA compliant mainboard (nothing appears on slot 0). Defaults to 0
-(don't force), and set to 1 (force probing) when either
-CONFIG_ALPHA_JENSEN or CONFIG_EISA_VLB_PRIMING are set.
-
-** Random notes :
+Random notes
+============
Converting an EISA driver to the new API mostly involves *deleting*
code (since probing is now in the core EISA code). Unfortunately, most
@@ -194,9 +219,11 @@
For example, switching your favorite EISA SCSI card to the "hotplug"
model is "the right thing"(tm).
-** Thanks :
+Thanks
+======
-I'd like to thank the following people for their help :
+I'd like to thank the following people for their help:
+
- Xavier Benigni for lending me a wonderful Alpha Jensen,
- James Bottomley, Jeff Garzik for getting this stuff into the kernel,
- Andries Brouwer for contributing numerous EISA ids,
diff --git a/Documentation/fault-injection/fault-injection.txt b/Documentation/fault-injection/fault-injection.txt
index 415484f..918972b 100644
--- a/Documentation/fault-injection/fault-injection.txt
+++ b/Documentation/fault-injection/fault-injection.txt
@@ -134,6 +134,23 @@
fail_futex=
mmc_core.fail_request=<interval>,<probability>,<space>,<times>
+o proc entries
+
+- /proc/<pid>/fail-nth:
+- /proc/self/task/<tid>/fail-nth:
+
+ Write to this file of integer N makes N-th call in the task fail.
+ Read from this file returns a integer value. A value of '0' indicates
+ that the fault setup with a previous write to this file was injected.
+ A positive integer N indicates that the fault wasn't yet injected.
+ Note that this file enables all types of faults (slab, futex, etc).
+ This setting takes precedence over all other generic debugfs settings
+ like probability, interval, times, etc. But per-capability settings
+ (e.g. fail_futex/ignore-private) take precedence over it.
+
+ This feature is intended for systematic testing of faults in a single
+ system call. See an example below.
+
How to add new fault injection capability
-----------------------------------------
@@ -278,3 +295,65 @@
# env FAILCMD_TYPE=fail_page_alloc \
./tools/testing/fault-injection/failcmd.sh --times=100 \
-- make -C tools/testing/selftests/ run_tests
+
+Systematic faults using fail-nth
+---------------------------------
+
+The following code systematically faults 0-th, 1-st, 2-nd and so on
+capabilities in the socketpair() system call.
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/socket.h>
+#include <sys/syscall.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <string.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <errno.h>
+
+int main()
+{
+ int i, err, res, fail_nth, fds[2];
+ char buf[128];
+
+ system("echo N > /sys/kernel/debug/failslab/ignore-gfp-wait");
+ sprintf(buf, "/proc/self/task/%ld/fail-nth", syscall(SYS_gettid));
+ fail_nth = open(buf, O_RDWR);
+ for (i = 1;; i++) {
+ sprintf(buf, "%d", i);
+ write(fail_nth, buf, strlen(buf));
+ res = socketpair(AF_LOCAL, SOCK_STREAM, 0, fds);
+ err = errno;
+ pread(fail_nth, buf, sizeof(buf), 0);
+ if (res == 0) {
+ close(fds[0]);
+ close(fds[1]);
+ }
+ printf("%d-th fault %c: res=%d/%d\n", i, atoi(buf) ? 'N' : 'Y',
+ res, err);
+ if (atoi(buf))
+ break;
+ }
+ return 0;
+}
+
+An example output:
+
+1-th fault Y: res=-1/23
+2-th fault Y: res=-1/23
+3-th fault Y: res=-1/12
+4-th fault Y: res=-1/12
+5-th fault Y: res=-1/23
+6-th fault Y: res=-1/23
+7-th fault Y: res=-1/23
+8-th fault Y: res=-1/12
+9-th fault Y: res=-1/12
+10-th fault Y: res=-1/12
+11-th fault Y: res=-1/12
+12-th fault Y: res=-1/12
+13-th fault Y: res=-1/12
+14-th fault Y: res=-1/12
+15-th fault Y: res=-1/12
+16-th fault N: res=0/12
diff --git a/Documentation/filesystems/overlayfs.txt b/Documentation/filesystems/overlayfs.txt
index c9e884b..36f528a 100644
--- a/Documentation/filesystems/overlayfs.txt
+++ b/Documentation/filesystems/overlayfs.txt
@@ -201,6 +201,40 @@
top, lower2 the middle and lower3 the bottom layer.
+Sharing and copying layers
+--------------------------
+
+Lower layers may be shared among several overlay mounts and that is indeed
+a very common practice. An overlay mount may use the same lower layer
+path as another overlay mount and it may use a lower layer path that is
+beneath or above the path of another overlay lower layer path.
+
+Using an upper layer path and/or a workdir path that are already used by
+another overlay mount is not allowed and will fail with EBUSY. Using
+partially overlapping paths is not allowed but will not fail with EBUSY.
+
+Mounting an overlay using an upper layer path, where the upper layer path
+was previously used by another mounted overlay in combination with a
+different lower layer path, is allowed, unless the "inodes index" feature
+is enabled.
+
+With the "inodes index" feature, on the first time mount, an NFS file
+handle of the lower layer root directory, along with the UUID of the lower
+filesystem, are encoded and stored in the "trusted.overlay.origin" extended
+attribute on the upper layer root directory. On subsequent mount attempts,
+the lower root directory file handle and lower filesystem UUID are compared
+to the stored origin in upper root directory. On failure to verify the
+lower root origin, mount will fail with ESTALE. An overlayfs mount with
+"inodes index" enabled will fail with EOPNOTSUPP if the lower filesystem
+does not support NFS export, lower filesystem does not have a valid UUID or
+if the upper filesystem does not support extended attributes.
+
+It is quite a common practice to copy overlay layers to a different
+directory tree on the same or different underlying filesystem, and even
+to a different machine. With the "inodes index" feature, trying to mount
+the copied layers will fail the verification of the lower root file handle.
+
+
Non-standard behavior
---------------------
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 4cddbce..adba21b 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -1786,12 +1786,16 @@
pos: 0
flags: 02
mnt_id: 9
- tfd: 5 events: 1d data: ffffffffffffffff
+ tfd: 5 events: 1d data: ffffffffffffffff pos:0 ino:61af sdev:7
where 'tfd' is a target file descriptor number in decimal form,
'events' is events mask being watched and the 'data' is data
associated with a target [see epoll(7) for more details].
+ The 'pos' is current offset of the target file in decimal form
+ [see lseek(2)], 'ino' and 'sdev' are inode and device numbers
+ where target file resides, all in hex format.
+
Fsnotify files
~~~~~~~~~~~~~~
For inotify files the format is the following
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index 48c9faa..73e7d91 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -1225,12 +1225,6 @@
mount can be accurately replicated (e.g. umounting and mounting again)
based on the information found in /proc/mounts.
-A simple method of saving options at mount/remount time and showing
-them is provided with the save_mount_options() and
-generic_show_options() helper functions. Please note, that using
-these may have drawbacks. For more info see header comments for these
-functions in fs/namespace.c.
-
Resources
=========
diff --git a/Documentation/flexible-arrays.txt b/Documentation/flexible-arrays.txt
index df904ae..a0f2989 100644
--- a/Documentation/flexible-arrays.txt
+++ b/Documentation/flexible-arrays.txt
@@ -1,6 +1,9 @@
+===================================
Using flexible arrays in the kernel
-Last updated for 2.6.32
-Jonathan Corbet <corbet@lwn.net>
+===================================
+
+:Updated: Last updated for 2.6.32
+:Author: Jonathan Corbet <corbet@lwn.net>
Large contiguous memory allocations can be unreliable in the Linux kernel.
Kernel programmers will sometimes respond to this problem by allocating
@@ -26,7 +29,7 @@
locking at all; if concurrent access to an array is possible, then the
caller must arrange for appropriate mutual exclusion.
-The creation of a flexible array is done with:
+The creation of a flexible array is done with::
#include <linux/flex_array.h>
@@ -40,14 +43,14 @@
the current code, using flags to ask for high memory is likely to lead to
notably unpleasant side effects.
-It is also possible to define flexible arrays at compile time with:
+It is also possible to define flexible arrays at compile time with::
DEFINE_FLEX_ARRAY(name, element_size, total);
This macro will result in a definition of an array with the given name; the
element size and total will be checked for validity at compile time.
-Storing data into a flexible array is accomplished with a call to:
+Storing data into a flexible array is accomplished with a call to::
int flex_array_put(struct flex_array *array, unsigned int element_nr,
void *src, gfp_t flags);
@@ -63,7 +66,7 @@
memory allocator would be a bad thing. That can be avoided by using
GFP_ATOMIC for the flags value, but, often, there is a better way. The
trick is to ensure that any needed memory allocations are done before
-entering atomic context, using:
+entering atomic context, using::
int flex_array_prealloc(struct flex_array *array, unsigned int start,
unsigned int nr_elements, gfp_t flags);
@@ -73,7 +76,7 @@
flex_array_put() call on an element in that range is guaranteed not to
block.
-Getting data back out of the array is done with:
+Getting data back out of the array is done with::
void *flex_array_get(struct flex_array *fa, unsigned int element_nr);
@@ -89,7 +92,7 @@
Note that, if array elements are allocated with __GFP_ZERO, they will be
initialized to zero and this poisoning will not happen.
-Individual elements in the array can be cleared with:
+Individual elements in the array can be cleared with::
int flex_array_clear(struct flex_array *array, unsigned int element_nr);
@@ -97,7 +100,7 @@
zero. If storage for the indicated element is not allocated for the array,
flex_array_clear() will return -EINVAL instead. Note that clearing an
element does not release the storage associated with it; to reduce the
-allocated size of an array, call:
+allocated size of an array, call::
int flex_array_shrink(struct flex_array *array);
@@ -106,12 +109,12 @@
FLEX_ARRAY_FREE bytes, so (1) it can be expensive, and (2) it will not work
if the array's pages are allocated with __GFP_ZERO.
-It is possible to remove all elements of an array with a call to:
+It is possible to remove all elements of an array with a call to::
void flex_array_free_parts(struct flex_array *array);
This call frees all elements, but leaves the array itself in place.
-Freeing the entire array is done with:
+Freeing the entire array is done with::
void flex_array_free(struct flex_array *array);
diff --git a/Documentation/futex-requeue-pi.txt b/Documentation/futex-requeue-pi.txt
index 77b36f5..14ab578 100644
--- a/Documentation/futex-requeue-pi.txt
+++ b/Documentation/futex-requeue-pi.txt
@@ -1,5 +1,6 @@
+================
Futex Requeue PI
-----------------
+================
Requeueing of tasks from a non-PI futex to a PI futex requires
special handling in order to ensure the underlying rt_mutex is never
@@ -20,28 +21,28 @@
rest to the natural wakeup inherent in unlocking the mutex
associated with the condvar.
-Consider the simplified glibc calls:
+Consider the simplified glibc calls::
-/* caller must lock mutex */
-pthread_cond_wait(cond, mutex)
-{
- lock(cond->__data.__lock);
- unlock(mutex);
- do {
- unlock(cond->__data.__lock);
- futex_wait(cond->__data.__futex);
- lock(cond->__data.__lock);
- } while(...)
- unlock(cond->__data.__lock);
- lock(mutex);
-}
+ /* caller must lock mutex */
+ pthread_cond_wait(cond, mutex)
+ {
+ lock(cond->__data.__lock);
+ unlock(mutex);
+ do {
+ unlock(cond->__data.__lock);
+ futex_wait(cond->__data.__futex);
+ lock(cond->__data.__lock);
+ } while(...)
+ unlock(cond->__data.__lock);
+ lock(mutex);
+ }
-pthread_cond_broadcast(cond)
-{
- lock(cond->__data.__lock);
- unlock(cond->__data.__lock);
- futex_requeue(cond->data.__futex, cond->mutex);
-}
+ pthread_cond_broadcast(cond)
+ {
+ lock(cond->__data.__lock);
+ unlock(cond->__data.__lock);
+ futex_requeue(cond->data.__futex, cond->mutex);
+ }
Once pthread_cond_broadcast() requeues the tasks, the cond->mutex
has waiters. Note that pthread_cond_wait() attempts to lock the
@@ -53,29 +54,29 @@
be able to requeue tasks to PI futexes. This support implies that
upon a successful futex_wait system call, the caller would return to
user space already holding the PI futex. The glibc implementation
-would be modified as follows:
+would be modified as follows::
-/* caller must lock mutex */
-pthread_cond_wait_pi(cond, mutex)
-{
- lock(cond->__data.__lock);
- unlock(mutex);
- do {
- unlock(cond->__data.__lock);
- futex_wait_requeue_pi(cond->__data.__futex);
- lock(cond->__data.__lock);
- } while(...)
- unlock(cond->__data.__lock);
- /* the kernel acquired the mutex for us */
-}
+ /* caller must lock mutex */
+ pthread_cond_wait_pi(cond, mutex)
+ {
+ lock(cond->__data.__lock);
+ unlock(mutex);
+ do {
+ unlock(cond->__data.__lock);
+ futex_wait_requeue_pi(cond->__data.__futex);
+ lock(cond->__data.__lock);
+ } while(...)
+ unlock(cond->__data.__lock);
+ /* the kernel acquired the mutex for us */
+ }
-pthread_cond_broadcast_pi(cond)
-{
- lock(cond->__data.__lock);
- unlock(cond->__data.__lock);
- futex_requeue_pi(cond->data.__futex, cond->mutex);
-}
+ pthread_cond_broadcast_pi(cond)
+ {
+ lock(cond->__data.__lock);
+ unlock(cond->__data.__lock);
+ futex_requeue_pi(cond->data.__futex, cond->mutex);
+ }
The actual glibc implementation will likely test for PI and make the
necessary changes inside the existing calls rather than creating new
diff --git a/Documentation/gcc-plugins.txt b/Documentation/gcc-plugins.txt
index 433eaef..8502f24 100644
--- a/Documentation/gcc-plugins.txt
+++ b/Documentation/gcc-plugins.txt
@@ -1,14 +1,15 @@
+=========================
GCC plugin infrastructure
=========================
-1. Introduction
-===============
+Introduction
+============
GCC plugins are loadable modules that provide extra features to the
-compiler [1]. They are useful for runtime instrumentation and static analysis.
+compiler [1]_. They are useful for runtime instrumentation and static analysis.
We can analyse, change and add further code during compilation via
-callbacks [2], GIMPLE [3], IPA [4] and RTL passes [5].
+callbacks [2]_, GIMPLE [3]_, IPA [4]_ and RTL passes [5]_.
The GCC plugin infrastructure of the kernel supports all gcc versions from
4.5 to 6.0, building out-of-tree modules, cross-compilation and building in a
@@ -21,56 +22,61 @@
Currently the GCC plugin infrastructure supports only the x86, arm, arm64 and
powerpc architectures.
-This infrastructure was ported from grsecurity [6] and PaX [7].
+This infrastructure was ported from grsecurity [6]_ and PaX [7]_.
--
-[1] https://gcc.gnu.org/onlinedocs/gccint/Plugins.html
-[2] https://gcc.gnu.org/onlinedocs/gccint/Plugin-API.html#Plugin-API
-[3] https://gcc.gnu.org/onlinedocs/gccint/GIMPLE.html
-[4] https://gcc.gnu.org/onlinedocs/gccint/IPA.html
-[5] https://gcc.gnu.org/onlinedocs/gccint/RTL.html
-[6] https://grsecurity.net/
-[7] https://pax.grsecurity.net/
+
+.. [1] https://gcc.gnu.org/onlinedocs/gccint/Plugins.html
+.. [2] https://gcc.gnu.org/onlinedocs/gccint/Plugin-API.html#Plugin-API
+.. [3] https://gcc.gnu.org/onlinedocs/gccint/GIMPLE.html
+.. [4] https://gcc.gnu.org/onlinedocs/gccint/IPA.html
+.. [5] https://gcc.gnu.org/onlinedocs/gccint/RTL.html
+.. [6] https://grsecurity.net/
+.. [7] https://pax.grsecurity.net/
-2. Files
-========
+Files
+=====
-$(src)/scripts/gcc-plugins
+**$(src)/scripts/gcc-plugins**
+
This is the directory of the GCC plugins.
-$(src)/scripts/gcc-plugins/gcc-common.h
+**$(src)/scripts/gcc-plugins/gcc-common.h**
+
This is a compatibility header for GCC plugins.
It should be always included instead of individual gcc headers.
-$(src)/scripts/gcc-plugin.sh
+**$(src)/scripts/gcc-plugin.sh**
+
This script checks the availability of the included headers in
gcc-common.h and chooses the proper host compiler to build the plugins
(gcc-4.7 can be built by either gcc or g++).
-$(src)/scripts/gcc-plugins/gcc-generate-gimple-pass.h
-$(src)/scripts/gcc-plugins/gcc-generate-ipa-pass.h
-$(src)/scripts/gcc-plugins/gcc-generate-simple_ipa-pass.h
-$(src)/scripts/gcc-plugins/gcc-generate-rtl-pass.h
+**$(src)/scripts/gcc-plugins/gcc-generate-gimple-pass.h,
+$(src)/scripts/gcc-plugins/gcc-generate-ipa-pass.h,
+$(src)/scripts/gcc-plugins/gcc-generate-simple_ipa-pass.h,
+$(src)/scripts/gcc-plugins/gcc-generate-rtl-pass.h**
+
These headers automatically generate the registration structures for
GIMPLE, SIMPLE_IPA, IPA and RTL passes. They support all gcc versions
from 4.5 to 6.0.
They should be preferred to creating the structures by hand.
-3. Usage
-========
+Usage
+=====
You must install the gcc plugin headers for your gcc version,
-e.g., on Ubuntu for gcc-4.9:
+e.g., on Ubuntu for gcc-4.9::
apt-get install gcc-4.9-plugin-dev
-Enable a GCC plugin based feature in the kernel config:
+Enable a GCC plugin based feature in the kernel config::
CONFIG_GCC_PLUGIN_CYC_COMPLEXITY = y
-To compile only the plugin(s):
+To compile only the plugin(s)::
make gcc-plugins
diff --git a/Documentation/highuid.txt b/Documentation/highuid.txt
index 6bad6f1..6ee7046 100644
--- a/Documentation/highuid.txt
+++ b/Documentation/highuid.txt
@@ -1,4 +1,9 @@
-Notes on the change from 16-bit UIDs to 32-bit UIDs:
+===================================================
+Notes on the change from 16-bit UIDs to 32-bit UIDs
+===================================================
+
+:Author: Chris Wing <wingc@umich.edu>
+:Last updated: January 11, 2000
- kernel code MUST take into account __kernel_uid_t and __kernel_uid32_t
when communicating between user and kernel space in an ioctl or data
@@ -28,30 +33,34 @@
uses the 32-bit UID system calls properly otherwise.
This affects at least:
- iBCS on Intel
- sparc32 emulation on sparc64
- (need to support whatever new 32-bit UID system calls are added to
- sparc32)
+ - iBCS on Intel
+
+ - sparc32 emulation on sparc64
+ (need to support whatever new 32-bit UID system calls are added to
+ sparc32)
- Validate that all filesystems behave properly.
At present, 32-bit UIDs _should_ work for:
- ext2
- ufs
- isofs
- nfs
- coda
- udf
+
+ - ext2
+ - ufs
+ - isofs
+ - nfs
+ - coda
+ - udf
Ioctl() fixups have been made for:
- ncpfs
- smbfs
+
+ - ncpfs
+ - smbfs
Filesystems with simple fixups to prevent 16-bit UID wraparound:
- minix
- sysv
- qnx4
+
+ - minix
+ - sysv
+ - qnx4
Other filesystems have not been checked yet.
@@ -69,9 +78,3 @@
- make sure that the UID mapping feature of AX25 networking works properly
(it should be safe because it's always used a 32-bit integer to
communicate between user and kernel)
-
-
-Chris Wing
-wingc@umich.edu
-
-last updated: January 11, 2000
diff --git a/Documentation/hw_random.txt b/Documentation/hw_random.txt
index fce1634..121de96 100644
--- a/Documentation/hw_random.txt
+++ b/Documentation/hw_random.txt
@@ -1,90 +1,105 @@
-Introduction:
+==========================================================
+Linux support for random number generator in i8xx chipsets
+==========================================================
- The hw_random framework is software that makes use of a
- special hardware feature on your CPU or motherboard,
- a Random Number Generator (RNG). The software has two parts:
- a core providing the /dev/hwrng character device and its
- sysfs support, plus a hardware-specific driver that plugs
- into that core.
+Introduction
+============
- To make the most effective use of these mechanisms, you
- should download the support software as well. Download the
- latest version of the "rng-tools" package from the
- hw_random driver's official Web site:
+The hw_random framework is software that makes use of a
+special hardware feature on your CPU or motherboard,
+a Random Number Generator (RNG). The software has two parts:
+a core providing the /dev/hwrng character device and its
+sysfs support, plus a hardware-specific driver that plugs
+into that core.
- http://sourceforge.net/projects/gkernel/
+To make the most effective use of these mechanisms, you
+should download the support software as well. Download the
+latest version of the "rng-tools" package from the
+hw_random driver's official Web site:
- Those tools use /dev/hwrng to fill the kernel entropy pool,
- which is used internally and exported by the /dev/urandom and
- /dev/random special files.
+ http://sourceforge.net/projects/gkernel/
-Theory of operation:
+Those tools use /dev/hwrng to fill the kernel entropy pool,
+which is used internally and exported by the /dev/urandom and
+/dev/random special files.
- CHARACTER DEVICE. Using the standard open()
- and read() system calls, you can read random data from
- the hardware RNG device. This data is NOT CHECKED by any
- fitness tests, and could potentially be bogus (if the
- hardware is faulty or has been tampered with). Data is only
- output if the hardware "has-data" flag is set, but nevertheless
- a security-conscious person would run fitness tests on the
- data before assuming it is truly random.
+Theory of operation
+===================
- The rng-tools package uses such tests in "rngd", and lets you
- run them by hand with a "rngtest" utility.
+CHARACTER DEVICE. Using the standard open()
+and read() system calls, you can read random data from
+the hardware RNG device. This data is NOT CHECKED by any
+fitness tests, and could potentially be bogus (if the
+hardware is faulty or has been tampered with). Data is only
+output if the hardware "has-data" flag is set, but nevertheless
+a security-conscious person would run fitness tests on the
+data before assuming it is truly random.
- /dev/hwrng is char device major 10, minor 183.
+The rng-tools package uses such tests in "rngd", and lets you
+run them by hand with a "rngtest" utility.
- CLASS DEVICE. There is a /sys/class/misc/hw_random node with
- two unique attributes, "rng_available" and "rng_current". The
- "rng_available" attribute lists the hardware-specific drivers
- available, while "rng_current" lists the one which is currently
- connected to /dev/hwrng. If your system has more than one
- RNG available, you may change the one used by writing a name from
- the list in "rng_available" into "rng_current".
+/dev/hwrng is char device major 10, minor 183.
+
+CLASS DEVICE. There is a /sys/class/misc/hw_random node with
+two unique attributes, "rng_available" and "rng_current". The
+"rng_available" attribute lists the hardware-specific drivers
+available, while "rng_current" lists the one which is currently
+connected to /dev/hwrng. If your system has more than one
+RNG available, you may change the one used by writing a name from
+the list in "rng_available" into "rng_current".
==========================================================================
- Hardware driver for Intel/AMD/VIA Random Number Generators (RNG)
- Copyright 2000,2001 Jeff Garzik <jgarzik@pobox.com>
- Copyright 2000,2001 Philipp Rumpf <prumpf@mandrakesoft.com>
+
+Hardware driver for Intel/AMD/VIA Random Number Generators (RNG)
+ - Copyright 2000,2001 Jeff Garzik <jgarzik@pobox.com>
+ - Copyright 2000,2001 Philipp Rumpf <prumpf@mandrakesoft.com>
-About the Intel RNG hardware, from the firmware hub datasheet:
+About the Intel RNG hardware, from the firmware hub datasheet
+=============================================================
- The Firmware Hub integrates a Random Number Generator (RNG)
- using thermal noise generated from inherently random quantum
- mechanical properties of silicon. When not generating new random
- bits the RNG circuitry will enter a low power state. Intel will
- provide a binary software driver to give third party software
- access to our RNG for use as a security feature. At this time,
- the RNG is only to be used with a system in an OS-present state.
+The Firmware Hub integrates a Random Number Generator (RNG)
+using thermal noise generated from inherently random quantum
+mechanical properties of silicon. When not generating new random
+bits the RNG circuitry will enter a low power state. Intel will
+provide a binary software driver to give third party software
+access to our RNG for use as a security feature. At this time,
+the RNG is only to be used with a system in an OS-present state.
-Intel RNG Driver notes:
+Intel RNG Driver notes
+======================
- * FIXME: support poll(2)
+FIXME: support poll(2)
- NOTE: request_mem_region was removed, for three reasons:
- 1) Only one RNG is supported by this driver, 2) The location
- used by the RNG is a fixed location in MMIO-addressable memory,
+.. note::
+
+ request_mem_region was removed, for three reasons:
+
+ 1) Only one RNG is supported by this driver;
+ 2) The location used by the RNG is a fixed location in
+ MMIO-addressable memory;
3) users with properly working BIOS e820 handling will always
- have the region in which the RNG is located reserved, so
- request_mem_region calls always fail for proper setups.
- However, for people who use mem=XX, BIOS e820 information is
- -not- in /proc/iomem, and request_mem_region(RNG_ADDR) can
- succeed.
+ have the region in which the RNG is located reserved, so
+ request_mem_region calls always fail for proper setups.
+ However, for people who use mem=XX, BIOS e820 information is
+ **not** in /proc/iomem, and request_mem_region(RNG_ADDR) can
+ succeed.
-Driver details:
+Driver details
+==============
- Based on:
+Based on:
Intel 82802AB/82802AC Firmware Hub (FWH) Datasheet
- May 1999 Order Number: 290658-002 R
+ May 1999 Order Number: 290658-002 R
- Intel 82802 Firmware Hub: Random Number Generator
+Intel 82802 Firmware Hub:
+ Random Number Generator
Programmer's Reference Manual
- December 1999 Order Number: 298029-001 R
+ December 1999 Order Number: 298029-001 R
- Intel 82802 Firmware HUB Random Number Generator Driver
+Intel 82802 Firmware HUB Random Number Generator Driver
Copyright (c) 2000 Matt Sottek <msottek@quiknet.com>
- Special thanks to Matt Sottek. I did the "guts", he
- did the "brains" and all the testing.
+Special thanks to Matt Sottek. I did the "guts", he
+did the "brains" and all the testing.
diff --git a/Documentation/hwspinlock.txt b/Documentation/hwspinlock.txt
index 61c1ee9..ed640a2 100644
--- a/Documentation/hwspinlock.txt
+++ b/Documentation/hwspinlock.txt
@@ -1,6 +1,9 @@
+===========================
Hardware Spinlock Framework
+===========================
-1. Introduction
+Introduction
+============
Hardware spinlock modules provide hardware assistance for synchronization
and mutual exclusion between heterogeneous processors and those not operating
@@ -32,286 +35,370 @@
A common hwspinlock interface makes it possible to have generic, platform-
independent, drivers.
-2. User API
+User API
+========
+
+::
struct hwspinlock *hwspin_lock_request(void);
- - dynamically assign an hwspinlock and return its address, or NULL
- in case an unused hwspinlock isn't available. Users of this
- API will usually want to communicate the lock's id to the remote core
- before it can be used to achieve synchronization.
- Should be called from a process context (might sleep).
+
+Dynamically assign an hwspinlock and return its address, or NULL
+in case an unused hwspinlock isn't available. Users of this
+API will usually want to communicate the lock's id to the remote core
+before it can be used to achieve synchronization.
+
+Should be called from a process context (might sleep).
+
+::
struct hwspinlock *hwspin_lock_request_specific(unsigned int id);
- - assign a specific hwspinlock id and return its address, or NULL
- if that hwspinlock is already in use. Usually board code will
- be calling this function in order to reserve specific hwspinlock
- ids for predefined purposes.
- Should be called from a process context (might sleep).
+
+Assign a specific hwspinlock id and return its address, or NULL
+if that hwspinlock is already in use. Usually board code will
+be calling this function in order to reserve specific hwspinlock
+ids for predefined purposes.
+
+Should be called from a process context (might sleep).
+
+::
int of_hwspin_lock_get_id(struct device_node *np, int index);
- - retrieve the global lock id for an OF phandle-based specific lock.
- This function provides a means for DT users of a hwspinlock module
- to get the global lock id of a specific hwspinlock, so that it can
- be requested using the normal hwspin_lock_request_specific() API.
- The function returns a lock id number on success, -EPROBE_DEFER if
- the hwspinlock device is not yet registered with the core, or other
- error values.
- Should be called from a process context (might sleep).
+
+Retrieve the global lock id for an OF phandle-based specific lock.
+This function provides a means for DT users of a hwspinlock module
+to get the global lock id of a specific hwspinlock, so that it can
+be requested using the normal hwspin_lock_request_specific() API.
+
+The function returns a lock id number on success, -EPROBE_DEFER if
+the hwspinlock device is not yet registered with the core, or other
+error values.
+
+Should be called from a process context (might sleep).
+
+::
int hwspin_lock_free(struct hwspinlock *hwlock);
- - free a previously-assigned hwspinlock; returns 0 on success, or an
- appropriate error code on failure (e.g. -EINVAL if the hwspinlock
- is already free).
- Should be called from a process context (might sleep).
+
+Free a previously-assigned hwspinlock; returns 0 on success, or an
+appropriate error code on failure (e.g. -EINVAL if the hwspinlock
+is already free).
+
+Should be called from a process context (might sleep).
+
+::
int hwspin_lock_timeout(struct hwspinlock *hwlock, unsigned int timeout);
- - lock a previously-assigned hwspinlock with a timeout limit (specified in
- msecs). If the hwspinlock is already taken, the function will busy loop
- waiting for it to be released, but give up when the timeout elapses.
- Upon a successful return from this function, preemption is disabled so
- the caller must not sleep, and is advised to release the hwspinlock as
- soon as possible, in order to minimize remote cores polling on the
- hardware interconnect.
- Returns 0 when successful and an appropriate error code otherwise (most
- notably -ETIMEDOUT if the hwspinlock is still busy after timeout msecs).
- The function will never sleep.
+
+Lock a previously-assigned hwspinlock with a timeout limit (specified in
+msecs). If the hwspinlock is already taken, the function will busy loop
+waiting for it to be released, but give up when the timeout elapses.
+Upon a successful return from this function, preemption is disabled so
+the caller must not sleep, and is advised to release the hwspinlock as
+soon as possible, in order to minimize remote cores polling on the
+hardware interconnect.
+
+Returns 0 when successful and an appropriate error code otherwise (most
+notably -ETIMEDOUT if the hwspinlock is still busy after timeout msecs).
+The function will never sleep.
+
+::
int hwspin_lock_timeout_irq(struct hwspinlock *hwlock, unsigned int timeout);
- - lock a previously-assigned hwspinlock with a timeout limit (specified in
- msecs). If the hwspinlock is already taken, the function will busy loop
- waiting for it to be released, but give up when the timeout elapses.
- Upon a successful return from this function, preemption and the local
- interrupts are disabled, so the caller must not sleep, and is advised to
- release the hwspinlock as soon as possible.
- Returns 0 when successful and an appropriate error code otherwise (most
- notably -ETIMEDOUT if the hwspinlock is still busy after timeout msecs).
- The function will never sleep.
+
+Lock a previously-assigned hwspinlock with a timeout limit (specified in
+msecs). If the hwspinlock is already taken, the function will busy loop
+waiting for it to be released, but give up when the timeout elapses.
+Upon a successful return from this function, preemption and the local
+interrupts are disabled, so the caller must not sleep, and is advised to
+release the hwspinlock as soon as possible.
+
+Returns 0 when successful and an appropriate error code otherwise (most
+notably -ETIMEDOUT if the hwspinlock is still busy after timeout msecs).
+The function will never sleep.
+
+::
int hwspin_lock_timeout_irqsave(struct hwspinlock *hwlock, unsigned int to,
- unsigned long *flags);
- - lock a previously-assigned hwspinlock with a timeout limit (specified in
- msecs). If the hwspinlock is already taken, the function will busy loop
- waiting for it to be released, but give up when the timeout elapses.
- Upon a successful return from this function, preemption is disabled,
- local interrupts are disabled and their previous state is saved at the
- given flags placeholder. The caller must not sleep, and is advised to
- release the hwspinlock as soon as possible.
- Returns 0 when successful and an appropriate error code otherwise (most
- notably -ETIMEDOUT if the hwspinlock is still busy after timeout msecs).
- The function will never sleep.
+ unsigned long *flags);
+
+Lock a previously-assigned hwspinlock with a timeout limit (specified in
+msecs). If the hwspinlock is already taken, the function will busy loop
+waiting for it to be released, but give up when the timeout elapses.
+Upon a successful return from this function, preemption is disabled,
+local interrupts are disabled and their previous state is saved at the
+given flags placeholder. The caller must not sleep, and is advised to
+release the hwspinlock as soon as possible.
+
+Returns 0 when successful and an appropriate error code otherwise (most
+notably -ETIMEDOUT if the hwspinlock is still busy after timeout msecs).
+
+The function will never sleep.
+
+::
int hwspin_trylock(struct hwspinlock *hwlock);
- - attempt to lock a previously-assigned hwspinlock, but immediately fail if
- it is already taken.
- Upon a successful return from this function, preemption is disabled so
- caller must not sleep, and is advised to release the hwspinlock as soon as
- possible, in order to minimize remote cores polling on the hardware
- interconnect.
- Returns 0 on success and an appropriate error code otherwise (most
- notably -EBUSY if the hwspinlock was already taken).
- The function will never sleep.
+
+
+Attempt to lock a previously-assigned hwspinlock, but immediately fail if
+it is already taken.
+
+Upon a successful return from this function, preemption is disabled so
+caller must not sleep, and is advised to release the hwspinlock as soon as
+possible, in order to minimize remote cores polling on the hardware
+interconnect.
+
+Returns 0 on success and an appropriate error code otherwise (most
+notably -EBUSY if the hwspinlock was already taken).
+The function will never sleep.
+
+::
int hwspin_trylock_irq(struct hwspinlock *hwlock);
- - attempt to lock a previously-assigned hwspinlock, but immediately fail if
- it is already taken.
- Upon a successful return from this function, preemption and the local
- interrupts are disabled so caller must not sleep, and is advised to
- release the hwspinlock as soon as possible.
- Returns 0 on success and an appropriate error code otherwise (most
- notably -EBUSY if the hwspinlock was already taken).
- The function will never sleep.
+
+
+Attempt to lock a previously-assigned hwspinlock, but immediately fail if
+it is already taken.
+
+Upon a successful return from this function, preemption and the local
+interrupts are disabled so caller must not sleep, and is advised to
+release the hwspinlock as soon as possible.
+
+Returns 0 on success and an appropriate error code otherwise (most
+notably -EBUSY if the hwspinlock was already taken).
+
+The function will never sleep.
+
+::
int hwspin_trylock_irqsave(struct hwspinlock *hwlock, unsigned long *flags);
- - attempt to lock a previously-assigned hwspinlock, but immediately fail if
- it is already taken.
- Upon a successful return from this function, preemption is disabled,
- the local interrupts are disabled and their previous state is saved
- at the given flags placeholder. The caller must not sleep, and is advised
- to release the hwspinlock as soon as possible.
- Returns 0 on success and an appropriate error code otherwise (most
- notably -EBUSY if the hwspinlock was already taken).
- The function will never sleep.
+
+Attempt to lock a previously-assigned hwspinlock, but immediately fail if
+it is already taken.
+
+Upon a successful return from this function, preemption is disabled,
+the local interrupts are disabled and their previous state is saved
+at the given flags placeholder. The caller must not sleep, and is advised
+to release the hwspinlock as soon as possible.
+
+Returns 0 on success and an appropriate error code otherwise (most
+notably -EBUSY if the hwspinlock was already taken).
+The function will never sleep.
+
+::
void hwspin_unlock(struct hwspinlock *hwlock);
- - unlock a previously-locked hwspinlock. Always succeed, and can be called
- from any context (the function never sleeps). Note: code should _never_
- unlock an hwspinlock which is already unlocked (there is no protection
- against this).
+
+Unlock a previously-locked hwspinlock. Always succeed, and can be called
+from any context (the function never sleeps).
+
+.. note::
+
+ code should **never** unlock an hwspinlock which is already unlocked
+ (there is no protection against this).
+
+::
void hwspin_unlock_irq(struct hwspinlock *hwlock);
- - unlock a previously-locked hwspinlock and enable local interrupts.
- The caller should _never_ unlock an hwspinlock which is already unlocked.
- Doing so is considered a bug (there is no protection against this).
- Upon a successful return from this function, preemption and local
- interrupts are enabled. This function will never sleep.
+
+Unlock a previously-locked hwspinlock and enable local interrupts.
+The caller should **never** unlock an hwspinlock which is already unlocked.
+
+Doing so is considered a bug (there is no protection against this).
+Upon a successful return from this function, preemption and local
+interrupts are enabled. This function will never sleep.
+
+::
void
hwspin_unlock_irqrestore(struct hwspinlock *hwlock, unsigned long *flags);
- - unlock a previously-locked hwspinlock.
- The caller should _never_ unlock an hwspinlock which is already unlocked.
- Doing so is considered a bug (there is no protection against this).
- Upon a successful return from this function, preemption is reenabled,
- and the state of the local interrupts is restored to the state saved at
- the given flags. This function will never sleep.
+
+Unlock a previously-locked hwspinlock.
+
+The caller should **never** unlock an hwspinlock which is already unlocked.
+Doing so is considered a bug (there is no protection against this).
+Upon a successful return from this function, preemption is reenabled,
+and the state of the local interrupts is restored to the state saved at
+the given flags. This function will never sleep.
+
+::
int hwspin_lock_get_id(struct hwspinlock *hwlock);
- - retrieve id number of a given hwspinlock. This is needed when an
- hwspinlock is dynamically assigned: before it can be used to achieve
- mutual exclusion with a remote cpu, the id number should be communicated
- to the remote task with which we want to synchronize.
- Returns the hwspinlock id number, or -EINVAL if hwlock is null.
-3. Typical usage
+Retrieve id number of a given hwspinlock. This is needed when an
+hwspinlock is dynamically assigned: before it can be used to achieve
+mutual exclusion with a remote cpu, the id number should be communicated
+to the remote task with which we want to synchronize.
-#include <linux/hwspinlock.h>
-#include <linux/err.h>
+Returns the hwspinlock id number, or -EINVAL if hwlock is null.
-int hwspinlock_example1(void)
-{
- struct hwspinlock *hwlock;
- int ret;
+Typical usage
+=============
- /* dynamically assign a hwspinlock */
- hwlock = hwspin_lock_request();
- if (!hwlock)
- ...
+::
- id = hwspin_lock_get_id(hwlock);
- /* probably need to communicate id to a remote processor now */
+ #include <linux/hwspinlock.h>
+ #include <linux/err.h>
- /* take the lock, spin for 1 sec if it's already taken */
- ret = hwspin_lock_timeout(hwlock, 1000);
- if (ret)
- ...
+ int hwspinlock_example1(void)
+ {
+ struct hwspinlock *hwlock;
+ int ret;
- /*
- * we took the lock, do our thing now, but do NOT sleep
- */
+ /* dynamically assign a hwspinlock */
+ hwlock = hwspin_lock_request();
+ if (!hwlock)
+ ...
- /* release the lock */
- hwspin_unlock(hwlock);
+ id = hwspin_lock_get_id(hwlock);
+ /* probably need to communicate id to a remote processor now */
- /* free the lock */
- ret = hwspin_lock_free(hwlock);
- if (ret)
- ...
+ /* take the lock, spin for 1 sec if it's already taken */
+ ret = hwspin_lock_timeout(hwlock, 1000);
+ if (ret)
+ ...
- return ret;
-}
+ /*
+ * we took the lock, do our thing now, but do NOT sleep
+ */
-int hwspinlock_example2(void)
-{
- struct hwspinlock *hwlock;
- int ret;
+ /* release the lock */
+ hwspin_unlock(hwlock);
- /*
- * assign a specific hwspinlock id - this should be called early
- * by board init code.
- */
- hwlock = hwspin_lock_request_specific(PREDEFINED_LOCK_ID);
- if (!hwlock)
- ...
+ /* free the lock */
+ ret = hwspin_lock_free(hwlock);
+ if (ret)
+ ...
- /* try to take it, but don't spin on it */
- ret = hwspin_trylock(hwlock);
- if (!ret) {
- pr_info("lock is already taken\n");
- return -EBUSY;
+ return ret;
}
- /*
- * we took the lock, do our thing now, but do NOT sleep
- */
+ int hwspinlock_example2(void)
+ {
+ struct hwspinlock *hwlock;
+ int ret;
- /* release the lock */
- hwspin_unlock(hwlock);
+ /*
+ * assign a specific hwspinlock id - this should be called early
+ * by board init code.
+ */
+ hwlock = hwspin_lock_request_specific(PREDEFINED_LOCK_ID);
+ if (!hwlock)
+ ...
- /* free the lock */
- ret = hwspin_lock_free(hwlock);
- if (ret)
- ...
+ /* try to take it, but don't spin on it */
+ ret = hwspin_trylock(hwlock);
+ if (!ret) {
+ pr_info("lock is already taken\n");
+ return -EBUSY;
+ }
- return ret;
-}
+ /*
+ * we took the lock, do our thing now, but do NOT sleep
+ */
+
+ /* release the lock */
+ hwspin_unlock(hwlock);
+
+ /* free the lock */
+ ret = hwspin_lock_free(hwlock);
+ if (ret)
+ ...
+
+ return ret;
+ }
-4. API for implementors
+API for implementors
+====================
+
+::
int hwspin_lock_register(struct hwspinlock_device *bank, struct device *dev,
const struct hwspinlock_ops *ops, int base_id, int num_locks);
- - to be called from the underlying platform-specific implementation, in
- order to register a new hwspinlock device (which is usually a bank of
- numerous locks). Should be called from a process context (this function
- might sleep).
- Returns 0 on success, or appropriate error code on failure.
+
+To be called from the underlying platform-specific implementation, in
+order to register a new hwspinlock device (which is usually a bank of
+numerous locks). Should be called from a process context (this function
+might sleep).
+
+Returns 0 on success, or appropriate error code on failure.
+
+::
int hwspin_lock_unregister(struct hwspinlock_device *bank);
- - to be called from the underlying vendor-specific implementation, in order
- to unregister an hwspinlock device (which is usually a bank of numerous
- locks).
- Should be called from a process context (this function might sleep).
- Returns the address of hwspinlock on success, or NULL on error (e.g.
- if the hwspinlock is still in use).
-5. Important structs
+To be called from the underlying vendor-specific implementation, in order
+to unregister an hwspinlock device (which is usually a bank of numerous
+locks).
+
+Should be called from a process context (this function might sleep).
+
+Returns the address of hwspinlock on success, or NULL on error (e.g.
+if the hwspinlock is still in use).
+
+Important structs
+=================
struct hwspinlock_device is a device which usually contains a bank
of hardware locks. It is registered by the underlying hwspinlock
implementation using the hwspin_lock_register() API.
-/**
- * struct hwspinlock_device - a device which usually spans numerous hwspinlocks
- * @dev: underlying device, will be used to invoke runtime PM api
- * @ops: platform-specific hwspinlock handlers
- * @base_id: id index of the first lock in this device
- * @num_locks: number of locks in this device
- * @lock: dynamically allocated array of 'struct hwspinlock'
- */
-struct hwspinlock_device {
- struct device *dev;
- const struct hwspinlock_ops *ops;
- int base_id;
- int num_locks;
- struct hwspinlock lock[0];
-};
+::
+
+ /**
+ * struct hwspinlock_device - a device which usually spans numerous hwspinlocks
+ * @dev: underlying device, will be used to invoke runtime PM api
+ * @ops: platform-specific hwspinlock handlers
+ * @base_id: id index of the first lock in this device
+ * @num_locks: number of locks in this device
+ * @lock: dynamically allocated array of 'struct hwspinlock'
+ */
+ struct hwspinlock_device {
+ struct device *dev;
+ const struct hwspinlock_ops *ops;
+ int base_id;
+ int num_locks;
+ struct hwspinlock lock[0];
+ };
struct hwspinlock_device contains an array of hwspinlock structs, each
-of which represents a single hardware lock:
+of which represents a single hardware lock::
-/**
- * struct hwspinlock - this struct represents a single hwspinlock instance
- * @bank: the hwspinlock_device structure which owns this lock
- * @lock: initialized and used by hwspinlock core
- * @priv: private data, owned by the underlying platform-specific hwspinlock drv
- */
-struct hwspinlock {
- struct hwspinlock_device *bank;
- spinlock_t lock;
- void *priv;
-};
+ /**
+ * struct hwspinlock - this struct represents a single hwspinlock instance
+ * @bank: the hwspinlock_device structure which owns this lock
+ * @lock: initialized and used by hwspinlock core
+ * @priv: private data, owned by the underlying platform-specific hwspinlock drv
+ */
+ struct hwspinlock {
+ struct hwspinlock_device *bank;
+ spinlock_t lock;
+ void *priv;
+ };
When registering a bank of locks, the hwspinlock driver only needs to
set the priv members of the locks. The rest of the members are set and
initialized by the hwspinlock core itself.
-6. Implementation callbacks
+Implementation callbacks
+========================
-There are three possible callbacks defined in 'struct hwspinlock_ops':
+There are three possible callbacks defined in 'struct hwspinlock_ops'::
-struct hwspinlock_ops {
- int (*trylock)(struct hwspinlock *lock);
- void (*unlock)(struct hwspinlock *lock);
- void (*relax)(struct hwspinlock *lock);
-};
+ struct hwspinlock_ops {
+ int (*trylock)(struct hwspinlock *lock);
+ void (*unlock)(struct hwspinlock *lock);
+ void (*relax)(struct hwspinlock *lock);
+ };
The first two callbacks are mandatory:
The ->trylock() callback should make a single attempt to take the lock, and
-return 0 on failure and 1 on success. This callback may _not_ sleep.
+return 0 on failure and 1 on success. This callback may **not** sleep.
The ->unlock() callback releases the lock. It always succeed, and it, too,
-may _not_ sleep.
+may **not** sleep.
The ->relax() callback is optional. It is called by hwspinlock core while
spinning on a lock, and can be used by the underlying implementation to force
-a delay between two successive invocations of ->trylock(). It may _not_ sleep.
+a delay between two successive invocations of ->trylock(). It may **not** sleep.
diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index 820d904..0500193 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -34,6 +34,8 @@
* Intel Broxton (SOC)
* Intel Lewisburg (PCH)
* Intel Gemini Lake (SOC)
+ * Intel Cannon Lake-H (PCH)
+ * Intel Cannon Lake-LP (PCH)
Datasheets: Publicly available at the Intel website
On Intel Patsburg and later chipsets, both the normal host SMBus controller
diff --git a/Documentation/i2c/dev-interface b/Documentation/i2c/dev-interface
index bcf919d..5ff1944 100644
--- a/Documentation/i2c/dev-interface
+++ b/Documentation/i2c/dev-interface
@@ -191,7 +191,7 @@
4* Other ioctl() calls are converted to in-kernel function calls by
i2c-dev. Examples include I2C_FUNCS, which queries the I2C adapter
functionality using i2c.h:i2c_get_functionality(), and I2C_SMBUS, which
-performs an SMBus transaction using i2c-core.c:i2c_smbus_xfer().
+performs an SMBus transaction using i2c-core-smbus.c:i2c_smbus_xfer().
The i2c-dev driver is responsible for checking all the parameters that
come from user-space for validity. After this point, there is no
@@ -200,13 +200,13 @@
directly. This means that I2C bus drivers don't need to implement
anything special to support access from user-space.
-5* These i2c-core.c/i2c.h functions are wrappers to the actual
-implementation of your I2C bus driver. Each adapter must declare
-callback functions implementing these standard calls.
-i2c.h:i2c_get_functionality() calls i2c_adapter.algo->functionality(),
-while i2c-core.c:i2c_smbus_xfer() calls either
+5* These i2c.h functions are wrappers to the actual implementation of
+your I2C bus driver. Each adapter must declare callback functions
+implementing these standard calls. i2c.h:i2c_get_functionality() calls
+i2c_adapter.algo->functionality(), while
+i2c-core-smbus.c:i2c_smbus_xfer() calls either
adapter.algo->smbus_xfer() if it is implemented, or if not,
-i2c-core.c:i2c_smbus_xfer_emulated() which in turn calls
+i2c-core-smbus.c:i2c_smbus_xfer_emulated() which in turn calls
i2c_adapter.algo->master_xfer().
After your I2C bus driver has processed these requests, execution runs
diff --git a/Documentation/input/index.rst b/Documentation/input/index.rst
index 7a3e71c..9888f5c 100644
--- a/Documentation/input/index.rst
+++ b/Documentation/input/index.rst
@@ -6,7 +6,6 @@
.. toctree::
:maxdepth: 2
- :numbered:
input_uapi
input_kapi
diff --git a/Documentation/intel_txt.txt b/Documentation/intel_txt.txt
index 91d89c5..d83c1a2 100644
--- a/Documentation/intel_txt.txt
+++ b/Documentation/intel_txt.txt
@@ -1,4 +1,5 @@
-Intel(R) TXT Overview:
+=====================
+Intel(R) TXT Overview
=====================
Intel's technology for safer computing, Intel(R) Trusted Execution
@@ -8,9 +9,10 @@
Intel TXT was formerly known by the code name LaGrande Technology (LT).
Intel TXT in Brief:
-o Provides dynamic root of trust for measurement (DRTM)
-o Data protection in case of improper shutdown
-o Measurement and verification of launched environment
+
+- Provides dynamic root of trust for measurement (DRTM)
+- Data protection in case of improper shutdown
+- Measurement and verification of launched environment
Intel TXT is part of the vPro(TM) brand and is also available some
non-vPro systems. It is currently available on desktop systems
@@ -24,16 +26,21 @@
Intel TXT has been presented at various events over the past few
years, some of which are:
- LinuxTAG 2008:
+
+ - LinuxTAG 2008:
http://www.linuxtag.org/2008/en/conf/events/vp-donnerstag.html
- TRUST2008:
+
+ - TRUST2008:
http://www.trust-conference.eu/downloads/Keynote-Speakers/
3_David-Grawrock_The-Front-Door-of-Trusted-Computing.pdf
- IDF, Shanghai:
- http://www.prcidf.com.cn/index_en.html
- IDFs 2006, 2007 (I'm not sure if/where they are online)
-Trusted Boot Project Overview:
+ - IDF, Shanghai:
+ http://www.prcidf.com.cn/index_en.html
+
+ - IDFs 2006, 2007
+ (I'm not sure if/where they are online)
+
+Trusted Boot Project Overview
=============================
Trusted Boot (tboot) is an open source, pre-kernel/VMM module that
@@ -87,11 +94,12 @@
How Does it Work?
=================
-o Tboot is an executable that is launched by the bootloader as
+- Tboot is an executable that is launched by the bootloader as
the "kernel" (the binary the bootloader executes).
-o It performs all of the work necessary to determine if the
+- It performs all of the work necessary to determine if the
platform supports Intel TXT and, if so, executes the GETSEC[SENTER]
processor instruction that initiates the dynamic root of trust.
+
- If tboot determines that the system does not support Intel TXT
or is not configured correctly (e.g. the SINIT AC Module was
incorrect), it will directly launch the kernel with no changes
@@ -99,12 +107,14 @@
- Tboot will output various information about its progress to the
terminal, serial port, and/or an in-memory log; the output
locations can be configured with a command line switch.
-o The GETSEC[SENTER] instruction will return control to tboot and
+
+- The GETSEC[SENTER] instruction will return control to tboot and
tboot then verifies certain aspects of the environment (e.g. TPM NV
lock, e820 table does not have invalid entries, etc.).
-o It will wake the APs from the special sleep state the GETSEC[SENTER]
+- It will wake the APs from the special sleep state the GETSEC[SENTER]
instruction had put them in and place them into a wait-for-SIPI
state.
+
- Because the processors will not respond to an INIT or SIPI when
in the TXT environment, it is necessary to create a small VT-x
guest for the APs. When they run in this guest, they will
@@ -112,8 +122,10 @@
VMEXITs, and then disable VT and jump to the SIPI vector. This
approach seemed like a better choice than having to insert
special code into the kernel's MP wakeup sequence.
-o Tboot then applies an (optional) user-defined launch policy to
+
+- Tboot then applies an (optional) user-defined launch policy to
verify the kernel and initrd.
+
- This policy is rooted in TPM NV and is described in the tboot
project. The tboot project also contains code for tools to
create and provision the policy.
@@ -121,30 +133,34 @@
then any kernel will be launched.
- Policy action is flexible and can include halting on failures
or simply logging them and continuing.
-o Tboot adjusts the e820 table provided by the bootloader to reserve
+
+- Tboot adjusts the e820 table provided by the bootloader to reserve
its own location in memory as well as to reserve certain other
TXT-related regions.
-o As part of its launch, tboot DMA protects all of RAM (using the
+- As part of its launch, tboot DMA protects all of RAM (using the
VT-d PMRs). Thus, the kernel must be booted with 'intel_iommu=on'
in order to remove this blanket protection and use VT-d's
page-level protection.
-o Tboot will populate a shared page with some data about itself and
+- Tboot will populate a shared page with some data about itself and
pass this to the Linux kernel as it transfers control.
+
- The location of the shared page is passed via the boot_params
struct as a physical address.
-o The kernel will look for the tboot shared page address and, if it
+
+- The kernel will look for the tboot shared page address and, if it
exists, map it.
-o As one of the checks/protections provided by TXT, it makes a copy
+- As one of the checks/protections provided by TXT, it makes a copy
of the VT-d DMARs in a DMA-protected region of memory and verifies
them for correctness. The VT-d code will detect if the kernel was
launched with tboot and use this copy instead of the one in the
ACPI table.
-o At this point, tboot and TXT are out of the picture until a
+- At this point, tboot and TXT are out of the picture until a
shutdown (S<n>)
-o In order to put a system into any of the sleep states after a TXT
+- In order to put a system into any of the sleep states after a TXT
launch, TXT must first be exited. This is to prevent attacks that
attempt to crash the system to gain control on reboot and steal
data left in memory.
+
- The kernel will perform all of its sleep preparation and
populate the shared page with the ACPI data needed to put the
platform in the desired sleep state.
@@ -172,7 +188,7 @@
That's pretty much it for TXT support.
-Configuring the System:
+Configuring the System
======================
This code works with 32bit, 32bit PAE, and 64bit (x86_64) kernels.
@@ -181,7 +197,8 @@
allow these to be individually enabled/disabled and the screens in
which to find them are BIOS-specific.
-grub.conf needs to be modified as follows:
+grub.conf needs to be modified as follows::
+
title Linux 2.6.29-tip w/ tboot
root (hd0,0)
kernel /tboot.gz logging=serial,vga,memory
diff --git a/Documentation/io-mapping.txt b/Documentation/io-mapping.txt
index 5ca7842..a966239 100644
--- a/Documentation/io-mapping.txt
+++ b/Documentation/io-mapping.txt
@@ -1,66 +1,81 @@
+========================
+The io_mapping functions
+========================
+
+API
+===
+
The io_mapping functions in linux/io-mapping.h provide an abstraction for
efficiently mapping small regions of an I/O device to the CPU. The initial
usage is to support the large graphics aperture on 32-bit processors where
ioremap_wc cannot be used to statically map the entire aperture to the CPU
as it would consume too much of the kernel address space.
-A mapping object is created during driver initialization using
+A mapping object is created during driver initialization using::
struct io_mapping *io_mapping_create_wc(unsigned long base,
unsigned long size)
- 'base' is the bus address of the region to be made
- mappable, while 'size' indicates how large a mapping region to
- enable. Both are in bytes.
+'base' is the bus address of the region to be made
+mappable, while 'size' indicates how large a mapping region to
+enable. Both are in bytes.
- This _wc variant provides a mapping which may only be used
- with the io_mapping_map_atomic_wc or io_mapping_map_wc.
+This _wc variant provides a mapping which may only be used
+with the io_mapping_map_atomic_wc or io_mapping_map_wc.
With this mapping object, individual pages can be mapped either atomically
or not, depending on the necessary scheduling environment. Of course, atomic
-maps are more efficient:
+maps are more efficient::
void *io_mapping_map_atomic_wc(struct io_mapping *mapping,
unsigned long offset)
- 'offset' is the offset within the defined mapping region.
- Accessing addresses beyond the region specified in the
- creation function yields undefined results. Using an offset
- which is not page aligned yields an undefined result. The
- return value points to a single page in CPU address space.
+'offset' is the offset within the defined mapping region.
+Accessing addresses beyond the region specified in the
+creation function yields undefined results. Using an offset
+which is not page aligned yields an undefined result. The
+return value points to a single page in CPU address space.
- This _wc variant returns a write-combining map to the
- page and may only be used with mappings created by
- io_mapping_create_wc
+This _wc variant returns a write-combining map to the
+page and may only be used with mappings created by
+io_mapping_create_wc
- Note that the task may not sleep while holding this page
- mapped.
+Note that the task may not sleep while holding this page
+mapped.
+
+::
void io_mapping_unmap_atomic(void *vaddr)
- 'vaddr' must be the value returned by the last
- io_mapping_map_atomic_wc call. This unmaps the specified
- page and allows the task to sleep once again.
+'vaddr' must be the value returned by the last
+io_mapping_map_atomic_wc call. This unmaps the specified
+page and allows the task to sleep once again.
If you need to sleep while holding the lock, you can use the non-atomic
variant, although they may be significantly slower.
+::
+
void *io_mapping_map_wc(struct io_mapping *mapping,
unsigned long offset)
- This works like io_mapping_map_atomic_wc except it allows
- the task to sleep while holding the page mapped.
+This works like io_mapping_map_atomic_wc except it allows
+the task to sleep while holding the page mapped.
+
+
+::
void io_mapping_unmap(void *vaddr)
- This works like io_mapping_unmap_atomic, except it is used
- for pages mapped with io_mapping_map_wc.
+This works like io_mapping_unmap_atomic, except it is used
+for pages mapped with io_mapping_map_wc.
-At driver close time, the io_mapping object must be freed:
+At driver close time, the io_mapping object must be freed::
void io_mapping_free(struct io_mapping *mapping)
-Current Implementation:
+Current Implementation
+======================
The initial implementation of these functions uses existing mapping
mechanisms and so provides only an abstraction layer and no new
diff --git a/Documentation/io_ordering.txt b/Documentation/io_ordering.txt
index 9faae6f..2ab303c 100644
--- a/Documentation/io_ordering.txt
+++ b/Documentation/io_ordering.txt
@@ -1,3 +1,7 @@
+==============================================
+Ordering I/O writes to memory-mapped addresses
+==============================================
+
On some platforms, so-called memory-mapped I/O is weakly ordered. On such
platforms, driver writers are responsible for ensuring that I/O writes to
memory-mapped addresses on their device arrive in the order intended. This is
@@ -8,39 +12,39 @@
subsequent writes to I/O space arrived only after all prior writes (much like a
memory barrier op, mb(), only with respect to I/O).
-A more concrete example from a hypothetical device driver:
+A more concrete example from a hypothetical device driver::
- ...
-CPU A: spin_lock_irqsave(&dev_lock, flags)
-CPU A: val = readl(my_status);
-CPU A: ...
-CPU A: writel(newval, ring_ptr);
-CPU A: spin_unlock_irqrestore(&dev_lock, flags)
- ...
-CPU B: spin_lock_irqsave(&dev_lock, flags)
-CPU B: val = readl(my_status);
-CPU B: ...
-CPU B: writel(newval2, ring_ptr);
-CPU B: spin_unlock_irqrestore(&dev_lock, flags)
- ...
+ ...
+ CPU A: spin_lock_irqsave(&dev_lock, flags)
+ CPU A: val = readl(my_status);
+ CPU A: ...
+ CPU A: writel(newval, ring_ptr);
+ CPU A: spin_unlock_irqrestore(&dev_lock, flags)
+ ...
+ CPU B: spin_lock_irqsave(&dev_lock, flags)
+ CPU B: val = readl(my_status);
+ CPU B: ...
+ CPU B: writel(newval2, ring_ptr);
+ CPU B: spin_unlock_irqrestore(&dev_lock, flags)
+ ...
In the case above, the device may receive newval2 before it receives newval,
-which could cause problems. Fixing it is easy enough though:
+which could cause problems. Fixing it is easy enough though::
- ...
-CPU A: spin_lock_irqsave(&dev_lock, flags)
-CPU A: val = readl(my_status);
-CPU A: ...
-CPU A: writel(newval, ring_ptr);
-CPU A: (void)readl(safe_register); /* maybe a config register? */
-CPU A: spin_unlock_irqrestore(&dev_lock, flags)
- ...
-CPU B: spin_lock_irqsave(&dev_lock, flags)
-CPU B: val = readl(my_status);
-CPU B: ...
-CPU B: writel(newval2, ring_ptr);
-CPU B: (void)readl(safe_register); /* maybe a config register? */
-CPU B: spin_unlock_irqrestore(&dev_lock, flags)
+ ...
+ CPU A: spin_lock_irqsave(&dev_lock, flags)
+ CPU A: val = readl(my_status);
+ CPU A: ...
+ CPU A: writel(newval, ring_ptr);
+ CPU A: (void)readl(safe_register); /* maybe a config register? */
+ CPU A: spin_unlock_irqrestore(&dev_lock, flags)
+ ...
+ CPU B: spin_lock_irqsave(&dev_lock, flags)
+ CPU B: val = readl(my_status);
+ CPU B: ...
+ CPU B: writel(newval2, ring_ptr);
+ CPU B: (void)readl(safe_register); /* maybe a config register? */
+ CPU B: spin_unlock_irqrestore(&dev_lock, flags)
Here, the reads from safe_register will cause the I/O chipset to flush any
pending writes before actually posting the read to the chipset, preventing
diff --git a/Documentation/iostats.txt b/Documentation/iostats.txt
index 65f694f..04d394a 100644
--- a/Documentation/iostats.txt
+++ b/Documentation/iostats.txt
@@ -1,49 +1,50 @@
+=====================
I/O statistics fields
----------------
+=====================
Since 2.4.20 (and some versions before, with patches), and 2.5.45,
more extensive disk statistics have been introduced to help measure disk
-activity. Tools such as sar and iostat typically interpret these and do
+activity. Tools such as ``sar`` and ``iostat`` typically interpret these and do
the work for you, but in case you are interested in creating your own
tools, the fields are explained here.
In 2.4 now, the information is found as additional fields in
-/proc/partitions. In 2.6, the same information is found in two
-places: one is in the file /proc/diskstats, and the other is within
+``/proc/partitions``. In 2.6 and upper, the same information is found in two
+places: one is in the file ``/proc/diskstats``, and the other is within
the sysfs file system, which must be mounted in order to obtain
the information. Throughout this document we'll assume that sysfs
-is mounted on /sys, although of course it may be mounted anywhere.
-Both /proc/diskstats and sysfs use the same source for the information
+is mounted on ``/sys``, although of course it may be mounted anywhere.
+Both ``/proc/diskstats`` and sysfs use the same source for the information
and so should not differ.
-Here are examples of these different formats:
+Here are examples of these different formats::
-2.4:
- 3 0 39082680 hda 446216 784926 9550688 4382310 424847 312726 5922052 19310380 0 3376340 23705160
- 3 1 9221278 hda1 35486 0 35496 38030 0 0 0 0 0 38030 38030
+ 2.4:
+ 3 0 39082680 hda 446216 784926 9550688 4382310 424847 312726 5922052 19310380 0 3376340 23705160
+ 3 1 9221278 hda1 35486 0 35496 38030 0 0 0 0 0 38030 38030
+ 2.6+ sysfs:
+ 446216 784926 9550688 4382310 424847 312726 5922052 19310380 0 3376340 23705160
+ 35486 38030 38030 38030
-2.6 sysfs:
- 446216 784926 9550688 4382310 424847 312726 5922052 19310380 0 3376340 23705160
- 35486 38030 38030 38030
+ 2.6+ diskstats:
+ 3 0 hda 446216 784926 9550688 4382310 424847 312726 5922052 19310380 0 3376340 23705160
+ 3 1 hda1 35486 38030 38030 38030
-2.6 diskstats:
- 3 0 hda 446216 784926 9550688 4382310 424847 312726 5922052 19310380 0 3376340 23705160
- 3 1 hda1 35486 38030 38030 38030
+On 2.4 you might execute ``grep 'hda ' /proc/partitions``. On 2.6+, you have
+a choice of ``cat /sys/block/hda/stat`` or ``grep 'hda ' /proc/diskstats``.
-On 2.4 you might execute "grep 'hda ' /proc/partitions". On 2.6, you have
-a choice of "cat /sys/block/hda/stat" or "grep 'hda ' /proc/diskstats".
The advantage of one over the other is that the sysfs choice works well
-if you are watching a known, small set of disks. /proc/diskstats may
+if you are watching a known, small set of disks. ``/proc/diskstats`` may
be a better choice if you are watching a large number of disks because
you'll avoid the overhead of 50, 100, or 500 or more opens/closes with
each snapshot of your disk statistics.
In 2.4, the statistics fields are those after the device name. In
the above example, the first field of statistics would be 446216.
-By contrast, in 2.6 if you look at /sys/block/hda/stat, you'll
+By contrast, in 2.6+ if you look at ``/sys/block/hda/stat``, you'll
find just the eleven fields, beginning with 446216. If you look at
-/proc/diskstats, the eleven fields will be preceded by the major and
+``/proc/diskstats``, the eleven fields will be preceded by the major and
minor device numbers, and device name. Each of these formats provides
eleven fields of statistics, each meaning exactly the same things.
All fields except field 9 are cumulative since boot. Field 9 should
@@ -59,30 +60,40 @@
Field 1 -- # of reads completed
This is the total number of reads completed successfully.
+
Field 2 -- # of reads merged, field 6 -- # of writes merged
Reads and writes which are adjacent to each other may be merged for
efficiency. Thus two 4K reads may become one 8K read before it is
ultimately handed to the disk, and so it will be counted (and queued)
as only one I/O. This field lets you know how often this was done.
+
Field 3 -- # of sectors read
This is the total number of sectors read successfully.
+
Field 4 -- # of milliseconds spent reading
This is the total number of milliseconds spent by all reads (as
measured from __make_request() to end_that_request_last()).
+
Field 5 -- # of writes completed
This is the total number of writes completed successfully.
+
Field 6 -- # of writes merged
See the description of field 2.
+
Field 7 -- # of sectors written
This is the total number of sectors written successfully.
+
Field 8 -- # of milliseconds spent writing
This is the total number of milliseconds spent by all writes (as
measured from __make_request() to end_that_request_last()).
+
Field 9 -- # of I/Os currently in progress
The only field that should go to zero. Incremented as requests are
given to appropriate struct request_queue and decremented as they finish.
+
Field 10 -- # of milliseconds spent doing I/Os
This field increases so long as field 9 is nonzero.
+
Field 11 -- weighted # of milliseconds spent doing I/Os
This field is incremented at each I/O start, I/O completion, I/O
merge, or read of these stats by the number of I/Os in progress
@@ -97,7 +108,7 @@
read I/Os issued per partition should equal those made to the disks ...
but due to the lack of locking it may only be very close.
-In 2.6, there are counters for each CPU, which make the lack of locking
+In 2.6+, there are counters for each CPU, which make the lack of locking
almost a non-issue. When the statistics are read, the per-CPU counters
are summed (possibly overflowing the unsigned long variable they are
summed to) and the result given to the user. There is no convenient
@@ -106,22 +117,25 @@
Disks vs Partitions
-------------------
-There were significant changes between 2.4 and 2.6 in the I/O subsystem.
+There were significant changes between 2.4 and 2.6+ in the I/O subsystem.
As a result, some statistic information disappeared. The translation from
a disk address relative to a partition to the disk address relative to
the host disk happens much earlier. All merges and timings now happen
at the disk level rather than at both the disk and partition level as
-in 2.4. Consequently, you'll see a different statistics output on 2.6 for
+in 2.4. Consequently, you'll see a different statistics output on 2.6+ for
partitions from that for disks. There are only *four* fields available
-for partitions on 2.6 machines. This is reflected in the examples above.
+for partitions on 2.6+ machines. This is reflected in the examples above.
Field 1 -- # of reads issued
This is the total number of reads issued to this partition.
+
Field 2 -- # of sectors read
This is the total number of sectors requested to be read from this
partition.
+
Field 3 -- # of writes issued
This is the total number of writes issued to this partition.
+
Field 4 -- # of sectors written
This is the total number of sectors requested to be written to
this partition.
@@ -149,16 +163,16 @@
Additional notes
----------------
-In 2.6, sysfs is not mounted by default. If your distribution of
+In 2.6+, sysfs is not mounted by default. If your distribution of
Linux hasn't added it already, here's the line you'll want to add to
-your /etc/fstab:
+your ``/etc/fstab``::
-none /sys sysfs defaults 0 0
+ none /sys sysfs defaults 0 0
-In 2.6, all disk statistics were removed from /proc/stat. In 2.4, they
-appear in both /proc/partitions and /proc/stat, although the ones in
-/proc/stat take a very different format from those in /proc/partitions
+In 2.6+, all disk statistics were removed from ``/proc/stat``. In 2.4, they
+appear in both ``/proc/partitions`` and ``/proc/stat``, although the ones in
+``/proc/stat`` take a very different format from those in ``/proc/partitions``
(see proc(5), if your system has it.)
-- ricklind@us.ibm.com
diff --git a/Documentation/irqflags-tracing.txt b/Documentation/irqflags-tracing.txt
index f6da056..bdd2082 100644
--- a/Documentation/irqflags-tracing.txt
+++ b/Documentation/irqflags-tracing.txt
@@ -1,8 +1,10 @@
+=======================
IRQ-flags state tracing
+=======================
-started by Ingo Molnar <mingo@redhat.com>
+:Author: started by Ingo Molnar <mingo@redhat.com>
-the "irq-flags tracing" feature "traces" hardirq and softirq state, in
+The "irq-flags tracing" feature "traces" hardirq and softirq state, in
that it gives interested subsystems an opportunity to be notified of
every hardirqs-off/hardirqs-on, softirqs-off/softirqs-on event that
happens in the kernel.
@@ -14,7 +16,7 @@
are locking APIs that are not used in IRQ context. (the one exception
for rwsems is worked around)
-architecture support for this is certainly not in the "trivial"
+Architecture support for this is certainly not in the "trivial"
category, because lots of lowlevel assembly code deal with irq-flags
state changes. But an architecture can be irq-flags-tracing enabled in a
rather straightforward and risk-free manner.
@@ -41,7 +43,7 @@
excluded from the irq-tracing [and lock validation] mechanism via
lockdep_off()/lockdep_on().
-in general there is no risk from having an incomplete irq-flags-tracing
+In general there is no risk from having an incomplete irq-flags-tracing
implementation in an architecture: lockdep will detect that and will
turn itself off. I.e. the lock validator will still be reliable. There
should be no crashes due to irq-tracing bugs. (except if the assembly
diff --git a/Documentation/isa.txt b/Documentation/isa.txt
index f232c26..def4a7b6 100644
--- a/Documentation/isa.txt
+++ b/Documentation/isa.txt
@@ -1,5 +1,6 @@
+===========
ISA Drivers
------------
+===========
The following text is adapted from the commit message of the initial
commit of the ISA bus driver authored by Rene Herman.
@@ -23,17 +24,17 @@
The usage model this provides is nice, and has been acked from the ALSA
side by Takashi Iwai and Jaroslav Kysela. The ALSA driver module_init's
-now (for oldisa-only drivers) become:
+now (for oldisa-only drivers) become::
-static int __init alsa_card_foo_init(void)
-{
- return isa_register_driver(&snd_foo_isa_driver, SNDRV_CARDS);
-}
+ static int __init alsa_card_foo_init(void)
+ {
+ return isa_register_driver(&snd_foo_isa_driver, SNDRV_CARDS);
+ }
-static void __exit alsa_card_foo_exit(void)
-{
- isa_unregister_driver(&snd_foo_isa_driver);
-}
+ static void __exit alsa_card_foo_exit(void)
+ {
+ isa_unregister_driver(&snd_foo_isa_driver);
+ }
Quite like the other bus models therefore. This removes a lot of
duplicated init code from the ALSA ISA drivers.
@@ -47,11 +48,11 @@
with.
The platform_driver callbacks are called with a platform_device param;
-the isa_driver callbacks are being called with a "struct device *dev,
-unsigned int id" pair directly -- with the device creation completely
+the isa_driver callbacks are being called with a ``struct device *dev,
+unsigned int id`` pair directly -- with the device creation completely
internal to the bus it's much cleaner to not leak isa_dev's by passing
them in at all. The id is the only thing we ever want other then the
-struct device * anyways, and it makes for nicer code in the callbacks as
+struct device anyways, and it makes for nicer code in the callbacks as
well.
With this additional .match() callback ISA drivers have all options. If
@@ -75,20 +76,20 @@
isa_register_driver() register's the struct device_driver, and then
loops over the passed in ndev creating devices and registering them.
-This causes the bus match method to be called for them, which is:
+This causes the bus match method to be called for them, which is::
-int isa_bus_match(struct device *dev, struct device_driver *driver)
-{
- struct isa_driver *isa_driver = to_isa_driver(driver);
+ int isa_bus_match(struct device *dev, struct device_driver *driver)
+ {
+ struct isa_driver *isa_driver = to_isa_driver(driver);
- if (dev->platform_data == isa_driver) {
- if (!isa_driver->match ||
- isa_driver->match(dev, to_isa_dev(dev)->id))
- return 1;
- dev->platform_data = NULL;
- }
- return 0;
-}
+ if (dev->platform_data == isa_driver) {
+ if (!isa_driver->match ||
+ isa_driver->match(dev, to_isa_dev(dev)->id))
+ return 1;
+ dev->platform_data = NULL;
+ }
+ return 0;
+ }
The first thing this does is check if this device is in fact one of this
driver's devices by seeing if the device's platform_data pointer is set
@@ -102,7 +103,7 @@
Then, if the the driver did not provide a .match, it matches. If it did,
the driver match() method is called to determine a match.
-If it did _not_ match, dev->platform_data is reset to indicate this to
+If it did **not** match, dev->platform_data is reset to indicate this to
isa_register_driver which can then unregister the device again.
If during all this, there's any error, or no devices matched at all
diff --git a/Documentation/isapnp.txt b/Documentation/isapnp.txt
index 400d1b5..8d0840a 100644
--- a/Documentation/isapnp.txt
+++ b/Documentation/isapnp.txt
@@ -1,3 +1,4 @@
+==========================================================
ISA Plug & Play support by Jaroslav Kysela <perex@suse.cz>
==========================================================
diff --git a/Documentation/kdump/kdump.txt b/Documentation/kdump/kdump.txt
index 615434d..5181445 100644
--- a/Documentation/kdump/kdump.txt
+++ b/Documentation/kdump/kdump.txt
@@ -112,8 +112,8 @@
2) Or use the system kernel binary itself as dump-capture kernel and there is
no need to build a separate dump-capture kernel. This is possible
only with the architectures which support a relocatable kernel. As
- of today, i386, x86_64, ppc64, ia64 and arm architectures support relocatable
- kernel.
+ of today, i386, x86_64, ppc64, ia64, arm and arm64 architectures support
+ relocatable kernel.
Building a relocatable kernel is advantageous from the point of view that
one does not have to build a second kernel for capturing the dump. But
@@ -339,7 +339,7 @@
For arm64:
- Use vmlinux or Image
-If you are using a uncompressed vmlinux image then use following command
+If you are using an uncompressed vmlinux image then use following command
to load dump-capture kernel.
kexec -p <dump-capture-kernel-vmlinux-image> \
@@ -361,6 +361,12 @@
--dtb=<dtb-for-dump-capture-kernel> \
--append="root=<root-dev> <arch-specific-options>"
+If you are using an uncompressed Image, then use following command
+to load dump-capture kernel.
+
+ kexec -p <dump-capture-kernel-Image> \
+ --initrd=<initrd-for-dump-capture-kernel> \
+ --append="root=<root-dev> <arch-specific-options>"
Please note, that --args-linux does not need to be specified for ia64.
It is planned to make this a no-op on that architecture, but for now
diff --git a/Documentation/kernel-per-CPU-kthreads.txt b/Documentation/kernel-per-CPU-kthreads.txt
index 2cb7dc5..0f00f9c 100644
--- a/Documentation/kernel-per-CPU-kthreads.txt
+++ b/Documentation/kernel-per-CPU-kthreads.txt
@@ -1,27 +1,29 @@
-REDUCING OS JITTER DUE TO PER-CPU KTHREADS
+==========================================
+Reducing OS jitter due to per-cpu kthreads
+==========================================
This document lists per-CPU kthreads in the Linux kernel and presents
options to control their OS jitter. Note that non-per-CPU kthreads are
not listed here. To reduce OS jitter from non-per-CPU kthreads, bind
them to a "housekeeping" CPU dedicated to such work.
+References
+==========
-REFERENCES
+- Documentation/IRQ-affinity.txt: Binding interrupts to sets of CPUs.
-o Documentation/IRQ-affinity.txt: Binding interrupts to sets of CPUs.
+- Documentation/cgroup-v1: Using cgroups to bind tasks to sets of CPUs.
-o Documentation/cgroup-v1: Using cgroups to bind tasks to sets of CPUs.
-
-o man taskset: Using the taskset command to bind tasks to sets
+- man taskset: Using the taskset command to bind tasks to sets
of CPUs.
-o man sched_setaffinity: Using the sched_setaffinity() system
+- man sched_setaffinity: Using the sched_setaffinity() system
call to bind tasks to sets of CPUs.
-o /sys/devices/system/cpu/cpuN/online: Control CPU N's hotplug state,
+- /sys/devices/system/cpu/cpuN/online: Control CPU N's hotplug state,
writing "0" to offline and "1" to online.
-o In order to locate kernel-generated OS jitter on CPU N:
+- In order to locate kernel-generated OS jitter on CPU N:
cd /sys/kernel/debug/tracing
echo 1 > max_graph_depth # Increase the "1" for more detail
@@ -29,12 +31,17 @@
# run workload
cat per_cpu/cpuN/trace
+kthreads
+========
-KTHREADS
+Name:
+ ehca_comp/%u
-Name: ehca_comp/%u
-Purpose: Periodically process Infiniband-related work.
+Purpose:
+ Periodically process Infiniband-related work.
+
To reduce its OS jitter, do any of the following:
+
1. Don't use eHCA Infiniband hardware, instead choosing hardware
that does not require per-CPU kthreads. This will prevent these
kthreads from being created in the first place. (This will
@@ -46,26 +53,45 @@
provisioned only on selected CPUs.
-Name: irq/%d-%s
-Purpose: Handle threaded interrupts.
+Name:
+ irq/%d-%s
+
+Purpose:
+ Handle threaded interrupts.
+
To reduce its OS jitter, do the following:
+
1. Use irq affinity to force the irq threads to execute on
some other CPU.
-Name: kcmtpd_ctr_%d
-Purpose: Handle Bluetooth work.
+Name:
+ kcmtpd_ctr_%d
+
+Purpose:
+ Handle Bluetooth work.
+
To reduce its OS jitter, do one of the following:
+
1. Don't use Bluetooth, in which case these kthreads won't be
created in the first place.
2. Use irq affinity to force Bluetooth-related interrupts to
occur on some other CPU and furthermore initiate all
Bluetooth activity on some other CPU.
-Name: ksoftirqd/%u
-Purpose: Execute softirq handlers when threaded or when under heavy load.
+Name:
+ ksoftirqd/%u
+
+Purpose:
+ Execute softirq handlers when threaded or when under heavy load.
+
To reduce its OS jitter, each softirq vector must be handled
separately as follows:
-TIMER_SOFTIRQ: Do all of the following:
+
+TIMER_SOFTIRQ
+-------------
+
+Do all of the following:
+
1. To the extent possible, keep the CPU out of the kernel when it
is non-idle, for example, by avoiding system calls and by forcing
both kernel threads and interrupts to execute elsewhere.
@@ -76,34 +102,59 @@
first one back online. Once you have onlined the CPUs in question,
do not offline any other CPUs, because doing so could force the
timer back onto one of the CPUs in question.
-NET_TX_SOFTIRQ and NET_RX_SOFTIRQ: Do all of the following:
+
+NET_TX_SOFTIRQ and NET_RX_SOFTIRQ
+---------------------------------
+
+Do all of the following:
+
1. Force networking interrupts onto other CPUs.
2. Initiate any network I/O on other CPUs.
3. Once your application has started, prevent CPU-hotplug operations
from being initiated from tasks that might run on the CPU to
be de-jittered. (It is OK to force this CPU offline and then
bring it back online before you start your application.)
-BLOCK_SOFTIRQ: Do all of the following:
+
+BLOCK_SOFTIRQ
+-------------
+
+Do all of the following:
+
1. Force block-device interrupts onto some other CPU.
2. Initiate any block I/O on other CPUs.
3. Once your application has started, prevent CPU-hotplug operations
from being initiated from tasks that might run on the CPU to
be de-jittered. (It is OK to force this CPU offline and then
bring it back online before you start your application.)
-IRQ_POLL_SOFTIRQ: Do all of the following:
+
+IRQ_POLL_SOFTIRQ
+----------------
+
+Do all of the following:
+
1. Force block-device interrupts onto some other CPU.
2. Initiate any block I/O and block-I/O polling on other CPUs.
3. Once your application has started, prevent CPU-hotplug operations
from being initiated from tasks that might run on the CPU to
be de-jittered. (It is OK to force this CPU offline and then
bring it back online before you start your application.)
-TASKLET_SOFTIRQ: Do one or more of the following:
+
+TASKLET_SOFTIRQ
+---------------
+
+Do one or more of the following:
+
1. Avoid use of drivers that use tasklets. (Such drivers will contain
calls to things like tasklet_schedule().)
2. Convert all drivers that you must use from tasklets to workqueues.
3. Force interrupts for drivers using tasklets onto other CPUs,
and also do I/O involving these drivers on other CPUs.
-SCHED_SOFTIRQ: Do all of the following:
+
+SCHED_SOFTIRQ
+-------------
+
+Do all of the following:
+
1. Avoid sending scheduler IPIs to the CPU to be de-jittered,
for example, ensure that at most one runnable kthread is present
on that CPU. If a thread that expects to run on the de-jittered
@@ -120,7 +171,12 @@
forcing both kernel threads and interrupts to execute elsewhere.
This further reduces the number of scheduler-clock interrupts
received by the de-jittered CPU.
-HRTIMER_SOFTIRQ: Do all of the following:
+
+HRTIMER_SOFTIRQ
+---------------
+
+Do all of the following:
+
1. To the extent possible, keep the CPU out of the kernel when it
is non-idle. For example, avoid system calls and force both
kernel threads and interrupts to execute elsewhere.
@@ -131,9 +187,15 @@
back online. Once you have onlined the CPUs in question, do not
offline any other CPUs, because doing so could force the timer
back onto one of the CPUs in question.
-RCU_SOFTIRQ: Do at least one of the following:
+
+RCU_SOFTIRQ
+-----------
+
+Do at least one of the following:
+
1. Offload callbacks and keep the CPU in either dyntick-idle or
adaptive-ticks state by doing all of the following:
+
a. CONFIG_NO_HZ_FULL=y and ensure that the CPU to be
de-jittered is marked as an adaptive-ticks CPU using the
"nohz_full=" boot parameter. Bind the rcuo kthreads to
@@ -142,8 +204,10 @@
when it is non-idle, for example, by avoiding system
calls and by forcing both kernel threads and interrupts
to execute elsewhere.
+
2. Enable RCU to do its processing remotely via dyntick-idle by
doing all of the following:
+
a. Build with CONFIG_NO_HZ=y and CONFIG_RCU_FAST_NO_HZ=y.
b. Ensure that the CPU goes idle frequently, allowing other
CPUs to detect that it has passed through an RCU quiescent
@@ -155,15 +219,20 @@
calls and by forcing both kernel threads and interrupts
to execute elsewhere.
-Name: kworker/%u:%d%s (cpu, id, priority)
-Purpose: Execute workqueue requests
+Name:
+ kworker/%u:%d%s (cpu, id, priority)
+
+Purpose:
+ Execute workqueue requests
+
To reduce its OS jitter, do any of the following:
+
1. Run your workload at a real-time priority, which will allow
preempting the kworker daemons.
2. A given workqueue can be made visible in the sysfs filesystem
by passing the WQ_SYSFS to that workqueue's alloc_workqueue().
Such a workqueue can be confined to a given subset of the
- CPUs using the /sys/devices/virtual/workqueue/*/cpumask sysfs
+ CPUs using the ``/sys/devices/virtual/workqueue/*/cpumask`` sysfs
files. The set of WQ_SYSFS workqueues can be displayed using
"ls sys/devices/virtual/workqueue". That said, the workqueues
maintainer would like to caution people against indiscriminately
@@ -173,6 +242,7 @@
to remove it, even if its addition was a mistake.
3. Do any of the following needed to avoid jitter that your
application cannot tolerate:
+
a. Build your kernel with CONFIG_SLUB=y rather than
CONFIG_SLAB=y, thus avoiding the slab allocator's periodic
use of each CPU's workqueues to run its cache_reap()
@@ -186,6 +256,7 @@
be able to build your kernel with CONFIG_CPU_FREQ=n to
avoid the CPU-frequency governor periodically running
on each CPU, including cs_dbs_timer() and od_dbs_timer().
+
WARNING: Please check your CPU specifications to
make sure that this is safe on your particular system.
d. As of v3.18, Christoph Lameter's on-demand vmstat workers
@@ -222,9 +293,14 @@
CONFIG_PMAC_RACKMETER=n to disable the CPU-meter,
avoiding OS jitter from rackmeter_do_timer().
-Name: rcuc/%u
-Purpose: Execute RCU callbacks in CONFIG_RCU_BOOST=y kernels.
+Name:
+ rcuc/%u
+
+Purpose:
+ Execute RCU callbacks in CONFIG_RCU_BOOST=y kernels.
+
To reduce its OS jitter, do at least one of the following:
+
1. Build the kernel with CONFIG_PREEMPT=n. This prevents these
kthreads from being created in the first place, and also obviates
the need for RCU priority boosting. This approach is feasible
@@ -244,9 +320,14 @@
CPU, again preventing the rcuc/%u kthreads from having any work
to do.
-Name: rcuob/%d, rcuop/%d, and rcuos/%d
-Purpose: Offload RCU callbacks from the corresponding CPU.
+Name:
+ rcuob/%d, rcuop/%d, and rcuos/%d
+
+Purpose:
+ Offload RCU callbacks from the corresponding CPU.
+
To reduce its OS jitter, do at least one of the following:
+
1. Use affinity, cgroups, or other mechanism to force these kthreads
to execute on some other CPU.
2. Build with CONFIG_RCU_NOCB_CPU=n, which will prevent these
@@ -254,9 +335,14 @@
note that this will not eliminate OS jitter, but will instead
shift it to RCU_SOFTIRQ.
-Name: watchdog/%u
-Purpose: Detect software lockups on each CPU.
+Name:
+ watchdog/%u
+
+Purpose:
+ Detect software lockups on each CPU.
+
To reduce its OS jitter, do at least one of the following:
+
1. Build with CONFIG_LOCKUP_DETECTOR=n, which will prevent these
kthreads from being created in the first place.
2. Boot with "nosoftlockup=0", which will also prevent these kthreads
diff --git a/Documentation/kobject.txt b/Documentation/kobject.txt
index 1be59a3..fc9485d 100644
--- a/Documentation/kobject.txt
+++ b/Documentation/kobject.txt
@@ -1,13 +1,13 @@
+=====================================================================
Everything you never wanted to know about kobjects, ksets, and ktypes
+=====================================================================
-Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+:Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+:Last updated: December 19, 2007
Based on an original article by Jon Corbet for lwn.net written October 1,
2003 and located at http://lwn.net/Articles/51437/
-Last updated December 19, 2007
-
-
Part of the difficulty in understanding the driver model - and the kobject
abstraction upon which it is built - is that there is no obvious starting
place. Dealing with kobjects requires understanding a few different types,
@@ -47,6 +47,7 @@
Embedding kobjects
+==================
It is rare for kernel code to create a standalone kobject, with one major
exception explained below. Instead, kobjects are used to control access to
@@ -65,7 +66,7 @@
interest.)
So, for example, the UIO code in drivers/uio/uio.c has a structure that
-defines the memory region associated with a uio device:
+defines the memory region associated with a uio device::
struct uio_map {
struct kobject kobj;
@@ -77,7 +78,7 @@
often have the opposite problem, however: given a struct kobject pointer,
what is the pointer to the containing structure? You must avoid tricks
(such as assuming that the kobject is at the beginning of the structure)
-and, instead, use the container_of() macro, found in <linux/kernel.h>:
+and, instead, use the container_of() macro, found in <linux/kernel.h>::
container_of(pointer, type, member)
@@ -90,13 +91,13 @@
The return value from container_of() is a pointer to the corresponding
container type. So, for example, a pointer "kp" to a struct kobject
embedded *within* a struct uio_map could be converted to a pointer to the
-*containing* uio_map structure with:
+*containing* uio_map structure with::
struct uio_map *u_map = container_of(kp, struct uio_map, kobj);
For convenience, programmers often define a simple macro for "back-casting"
kobject pointers to the containing type. Exactly this happens in the
-earlier drivers/uio/uio.c, as you can see here:
+earlier drivers/uio/uio.c, as you can see here::
struct uio_map {
struct kobject kobj;
@@ -106,23 +107,25 @@
#define to_map(map) container_of(map, struct uio_map, kobj)
where the macro argument "map" is a pointer to the struct kobject in
-question. That macro is subsequently invoked with:
+question. That macro is subsequently invoked with::
struct uio_map *map = to_map(kobj);
Initialization of kobjects
+==========================
Code which creates a kobject must, of course, initialize that object. Some
-of the internal fields are setup with a (mandatory) call to kobject_init():
+of the internal fields are setup with a (mandatory) call to kobject_init()::
void kobject_init(struct kobject *kobj, struct kobj_type *ktype);
The ktype is required for a kobject to be created properly, as every kobject
must have an associated kobj_type. After calling kobject_init(), to
-register the kobject with sysfs, the function kobject_add() must be called:
+register the kobject with sysfs, the function kobject_add() must be called::
- int kobject_add(struct kobject *kobj, struct kobject *parent, const char *fmt, ...);
+ int kobject_add(struct kobject *kobj, struct kobject *parent,
+ const char *fmt, ...);
This sets up the parent of the kobject and the name for the kobject
properly. If the kobject is to be associated with a specific kset,
@@ -133,7 +136,7 @@
As the name of the kobject is set when it is added to the kernel, the name
of the kobject should never be manipulated directly. If you must change
-the name of the kobject, call kobject_rename():
+the name of the kobject, call kobject_rename()::
int kobject_rename(struct kobject *kobj, const char *new_name);
@@ -146,12 +149,12 @@
incorrect and needs to be fixed.
To properly access the name of the kobject, use the function
-kobject_name():
+kobject_name()::
const char *kobject_name(const struct kobject * kobj);
There is a helper function to both initialize and add the kobject to the
-kernel at the same time, called surprisingly enough kobject_init_and_add():
+kernel at the same time, called surprisingly enough kobject_init_and_add()::
int kobject_init_and_add(struct kobject *kobj, struct kobj_type *ktype,
struct kobject *parent, const char *fmt, ...);
@@ -161,10 +164,11 @@
Uevents
+=======
After a kobject has been registered with the kobject core, you need to
announce to the world that it has been created. This can be done with a
-call to kobject_uevent():
+call to kobject_uevent()::
int kobject_uevent(struct kobject *kobj, enum kobject_action action);
@@ -180,11 +184,12 @@
Reference counts
+================
One of the key functions of a kobject is to serve as a reference counter
for the object in which it is embedded. As long as references to the object
exist, the object (and the code which supports it) must continue to exist.
-The low-level functions for manipulating a kobject's reference counts are:
+The low-level functions for manipulating a kobject's reference counts are::
struct kobject *kobject_get(struct kobject *kobj);
void kobject_put(struct kobject *kobj);
@@ -209,21 +214,24 @@
Creating "simple" kobjects
+==========================
Sometimes all that a developer wants is a way to create a simple directory
in the sysfs hierarchy, and not have to mess with the whole complication of
ksets, show and store functions, and other details. This is the one
exception where a single kobject should be created. To create such an
-entry, use the function:
+entry, use the function::
struct kobject *kobject_create_and_add(char *name, struct kobject *parent);
This function will create a kobject and place it in sysfs in the location
underneath the specified parent kobject. To create simple attributes
-associated with this kobject, use:
+associated with this kobject, use::
int sysfs_create_file(struct kobject *kobj, struct attribute *attr);
-or
+
+or::
+
int sysfs_create_group(struct kobject *kobj, struct attribute_group *grp);
Both types of attributes used here, with a kobject that has been created
@@ -236,6 +244,7 @@
ktypes and release methods
+==========================
One important thing still missing from the discussion is what happens to a
kobject when its reference count reaches zero. The code which created the
@@ -257,7 +266,7 @@
errors creeping in.
This notification is done through a kobject's release() method. Usually
-such a method has a form like:
+such a method has a form like::
void my_object_release(struct kobject *kobj)
{
@@ -281,7 +290,7 @@
Interestingly, the release() method is not stored in the kobject itself;
instead, it is associated with the ktype. So let us introduce struct
-kobj_type:
+kobj_type::
struct kobj_type {
void (*release)(struct kobject *kobj);
@@ -306,6 +315,7 @@
ksets
+=====
A kset is merely a collection of kobjects that want to be associated with
each other. There is no restriction that they be of the same ktype, but be
@@ -335,13 +345,16 @@
As a kset contains a kobject within it, it should always be dynamically
created and never declared statically or on the stack. To create a new
-kset use:
+kset use::
+
struct kset *kset_create_and_add(const char *name,
struct kset_uevent_ops *u,
struct kobject *parent);
-When you are finished with the kset, call:
+When you are finished with the kset, call::
+
void kset_unregister(struct kset *kset);
+
to destroy it. This removes the kset from sysfs and decrements its reference
count. When the reference count goes to zero, the kset will be released.
Because other references to the kset may still exist, the release may happen
@@ -351,14 +364,14 @@
samples/kobject/kset-example.c file in the kernel tree.
If a kset wishes to control the uevent operations of the kobjects
-associated with it, it can use the struct kset_uevent_ops to handle it:
+associated with it, it can use the struct kset_uevent_ops to handle it::
-struct kset_uevent_ops {
+ struct kset_uevent_ops {
int (*filter)(struct kset *kset, struct kobject *kobj);
const char *(*name)(struct kset *kset, struct kobject *kobj);
int (*uevent)(struct kset *kset, struct kobject *kobj,
struct kobj_uevent_env *env);
-};
+ };
The filter function allows a kset to prevent a uevent from being emitted to
@@ -386,6 +399,7 @@
Kobject removal
+===============
After a kobject has been registered with the kobject core successfully, it
must be cleaned up when the code is finished with it. To do that, call
@@ -409,6 +423,7 @@
Example code to copy from
+=========================
For a more complete example of using ksets and kobjects properly, see the
example programs samples/kobject/{kobject-example.c,kset-example.c},
diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt
index 1f6d45a..2335715 100644
--- a/Documentation/kprobes.txt
+++ b/Documentation/kprobes.txt
@@ -1,30 +1,36 @@
-Title : Kernel Probes (Kprobes)
-Authors : Jim Keniston <jkenisto@us.ibm.com>
- : Prasanna S Panchamukhi <prasanna.panchamukhi@gmail.com>
- : Masami Hiramatsu <mhiramat@redhat.com>
+=======================
+Kernel Probes (Kprobes)
+=======================
-CONTENTS
+:Author: Jim Keniston <jkenisto@us.ibm.com>
+:Author: Prasanna S Panchamukhi <prasanna.panchamukhi@gmail.com>
+:Author: Masami Hiramatsu <mhiramat@redhat.com>
-1. Concepts: Kprobes, Jprobes, Return Probes
-2. Architectures Supported
-3. Configuring Kprobes
-4. API Reference
-5. Kprobes Features and Limitations
-6. Probe Overhead
-7. TODO
-8. Kprobes Example
-9. Jprobes Example
-10. Kretprobes Example
-Appendix A: The kprobes debugfs interface
-Appendix B: The kprobes sysctl interface
+.. CONTENTS
-1. Concepts: Kprobes, Jprobes, Return Probes
+ 1. Concepts: Kprobes, Jprobes, Return Probes
+ 2. Architectures Supported
+ 3. Configuring Kprobes
+ 4. API Reference
+ 5. Kprobes Features and Limitations
+ 6. Probe Overhead
+ 7. TODO
+ 8. Kprobes Example
+ 9. Jprobes Example
+ 10. Kretprobes Example
+ Appendix A: The kprobes debugfs interface
+ Appendix B: The kprobes sysctl interface
+
+Concepts: Kprobes, Jprobes, Return Probes
+=========================================
Kprobes enables you to dynamically break into any kernel routine and
collect debugging and performance information non-disruptively. You
-can trap at almost any kernel code address(*), specifying a handler
+can trap at almost any kernel code address [1]_, specifying a handler
routine to be invoked when the breakpoint is hit.
-(*: some parts of the kernel code can not be trapped, see 1.5 Blacklist)
+
+.. [1] some parts of the kernel code can not be trapped, see
+ :ref:`kprobes_blacklist`)
There are currently three types of probes: kprobes, jprobes, and
kretprobes (also called return probes). A kprobe can be inserted
@@ -40,8 +46,8 @@
the probe is to be inserted and what handler is to be called when
the probe is hit.
-There are also register_/unregister_*probes() functions for batch
-registration/unregistration of a group of *probes. These functions
+There are also ``register_/unregister_*probes()`` functions for batch
+registration/unregistration of a group of ``*probes``. These functions
can speed up unregistration process when you have to unregister
a lot of probes at once.
@@ -51,9 +57,10 @@
Kprobes -- e.g., the difference between a pre_handler and
a post_handler, and how to use the maxactive and nmissed fields of
a kretprobe. But if you're in a hurry to start using Kprobes, you
-can skip ahead to section 2.
+can skip ahead to :ref:`kprobes_archs_supported`.
-1.1 How Does a Kprobe Work?
+How Does a Kprobe Work?
+-----------------------
When a kprobe is registered, Kprobes makes a copy of the probed
instruction and replaces the first byte(s) of the probed instruction
@@ -75,7 +82,8 @@
"post_handler," if any, that is associated with the kprobe.
Execution then continues with the instruction following the probepoint.
-1.2 How Does a Jprobe Work?
+How Does a Jprobe Work?
+-----------------------
A jprobe is implemented using a kprobe that is placed on a function's
entry point. It employs a simple mirroring principle to allow
@@ -113,9 +121,11 @@
bytes, or more than 64 bytes of argument data, depending on
architecture).
-1.3 Return Probes
+Return Probes
+-------------
-1.3.1 How Does a Return Probe Work?
+How Does a Return Probe Work?
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
When you call register_kretprobe(), Kprobes establishes a kprobe at
the entry to the function. When the probed function is called and this
@@ -150,7 +160,8 @@
time the probed function is entered but there is no kretprobe_instance
object available for establishing the return probe.
-1.3.2 Kretprobe entry-handler
+Kretprobe entry-handler
+^^^^^^^^^^^^^^^^^^^^^^^
Kretprobes also provides an optional user-specified handler which runs
on function entry. This handler is specified by setting the entry_handler
@@ -174,7 +185,10 @@
object available, then in addition to incrementing the nmissed count,
the user entry_handler invocation is also skipped.
-1.4 How Does Jump Optimization Work?
+.. _kprobes_jump_optimization:
+
+How Does Jump Optimization Work?
+--------------------------------
If your kernel is built with CONFIG_OPTPROBES=y (currently this flag
is automatically set 'y' on x86/x86-64, non-preemptive kernel) and
@@ -182,53 +196,60 @@
sysctl(8)), Kprobes tries to reduce probe-hit overhead by using a jump
instruction instead of a breakpoint instruction at each probepoint.
-1.4.1 Init a Kprobe
+Init a Kprobe
+^^^^^^^^^^^^^
When a probe is registered, before attempting this optimization,
Kprobes inserts an ordinary, breakpoint-based kprobe at the specified
address. So, even if it's not possible to optimize this particular
probepoint, there'll be a probe there.
-1.4.2 Safety Check
+Safety Check
+^^^^^^^^^^^^
Before optimizing a probe, Kprobes performs the following safety checks:
- Kprobes verifies that the region that will be replaced by the jump
-instruction (the "optimized region") lies entirely within one function.
-(A jump instruction is multiple bytes, and so may overlay multiple
-instructions.)
+ instruction (the "optimized region") lies entirely within one function.
+ (A jump instruction is multiple bytes, and so may overlay multiple
+ instructions.)
- Kprobes analyzes the entire function and verifies that there is no
-jump into the optimized region. Specifically:
+ jump into the optimized region. Specifically:
+
- the function contains no indirect jump;
- the function contains no instruction that causes an exception (since
- the fixup code triggered by the exception could jump back into the
- optimized region -- Kprobes checks the exception tables to verify this);
- and
+ the fixup code triggered by the exception could jump back into the
+ optimized region -- Kprobes checks the exception tables to verify this);
- there is no near jump to the optimized region (other than to the first
- byte).
+ byte).
- For each instruction in the optimized region, Kprobes verifies that
-the instruction can be executed out of line.
+ the instruction can be executed out of line.
-1.4.3 Preparing Detour Buffer
+Preparing Detour Buffer
+^^^^^^^^^^^^^^^^^^^^^^^
Next, Kprobes prepares a "detour" buffer, which contains the following
instruction sequence:
+
- code to push the CPU's registers (emulating a breakpoint trap)
- a call to the trampoline code which calls user's probe handlers.
- code to restore registers
- the instructions from the optimized region
- a jump back to the original execution path.
-1.4.4 Pre-optimization
+Pre-optimization
+^^^^^^^^^^^^^^^^
After preparing the detour buffer, Kprobes verifies that none of the
following situations exist:
+
- The probe has either a break_handler (i.e., it's a jprobe) or a
-post_handler.
+ post_handler.
- Other instructions in the optimized region are probed.
- The probe is disabled.
+
In any of the above cases, Kprobes won't start optimizing the probe.
Since these are temporary situations, Kprobes tries to start
optimizing it again if the situation is changed.
@@ -240,21 +261,23 @@
the CPU's instruction pointer to the copied code in the detour buffer
-- thus at least avoiding the single-step.
-1.4.5 Optimization
+Optimization
+^^^^^^^^^^^^
The Kprobe-optimizer doesn't insert the jump instruction immediately;
rather, it calls synchronize_sched() for safety first, because it's
possible for a CPU to be interrupted in the middle of executing the
-optimized region(*). As you know, synchronize_sched() can ensure
+optimized region [3]_. As you know, synchronize_sched() can ensure
that all interruptions that were active when synchronize_sched()
was called are done, but only if CONFIG_PREEMPT=n. So, this version
-of kprobe optimization supports only kernels with CONFIG_PREEMPT=n.(**)
+of kprobe optimization supports only kernels with CONFIG_PREEMPT=n [4]_.
After that, the Kprobe-optimizer calls stop_machine() to replace
the optimized region with a jump instruction to the detour buffer,
using text_poke_smp().
-1.4.6 Unoptimization
+Unoptimization
+^^^^^^^^^^^^^^
When an optimized kprobe is unregistered, disabled, or blocked by
another kprobe, it will be unoptimized. If this happens before
@@ -263,15 +286,15 @@
replaced with the original code (except for an int3 breakpoint in
the first byte) by using text_poke_smp().
-(*)Please imagine that the 2nd instruction is interrupted and then
-the optimizer replaces the 2nd instruction with the jump *address*
-while the interrupt handler is running. When the interrupt
-returns to original address, there is no valid instruction,
-and it causes an unexpected result.
+.. [3] Please imagine that the 2nd instruction is interrupted and then
+ the optimizer replaces the 2nd instruction with the jump *address*
+ while the interrupt handler is running. When the interrupt
+ returns to original address, there is no valid instruction,
+ and it causes an unexpected result.
-(**)This optimization-safety checking may be replaced with the
-stop-machine method that ksplice uses for supporting a CONFIG_PREEMPT=y
-kernel.
+.. [4] This optimization-safety checking may be replaced with the
+ stop-machine method that ksplice uses for supporting a CONFIG_PREEMPT=y
+ kernel.
NOTE for geeks:
The jump optimization changes the kprobe's pre_handler behavior.
@@ -280,11 +303,17 @@
is optimized, that modification is ignored. Thus, if you want to
tweak the kernel's execution path, you need to suppress optimization,
using one of the following techniques:
+
- Specify an empty function for the kprobe's post_handler or break_handler.
- or
+
+or
+
- Execute 'sysctl -w debug.kprobes_optimization=n'
-1.5 Blacklist
+.. _kprobes_blacklist:
+
+Blacklist
+---------
Kprobes can probe most of the kernel except itself. This means
that there are some functions where kprobes cannot probe. Probing
@@ -297,7 +326,10 @@
Kprobes checks the given probe address against the blacklist and
rejects registering it, if the given address is in the blacklist.
-2. Architectures Supported
+.. _kprobes_archs_supported:
+
+Architectures Supported
+=======================
Kprobes, jprobes, and return probes are implemented on the following
architectures:
@@ -312,7 +344,8 @@
- mips
- s390
-3. Configuring Kprobes
+Configuring Kprobes
+===================
When configuring the kernel using make menuconfig/xconfig/oldconfig,
ensure that CONFIG_KPROBES is set to "y". Under "General setup", look
@@ -331,7 +364,8 @@
so you can use "objdump -d -l vmlinux" to see the source-to-object
code mapping.
-4. API Reference
+API Reference
+=============
The Kprobes API includes a "register" function and an "unregister"
function for each type of probe. The API also includes "register_*probes"
@@ -340,10 +374,13 @@
the associated probe handlers that you'll write. See the files in the
samples/kprobes/ sub-directory for examples.
-4.1 register_kprobe
+register_kprobe
+---------------
-#include <linux/kprobes.h>
-int register_kprobe(struct kprobe *kp);
+::
+
+ #include <linux/kprobes.h>
+ int register_kprobe(struct kprobe *kp);
Sets a breakpoint at the address kp->addr. When the breakpoint is
hit, Kprobes calls kp->pre_handler. After the probed instruction
@@ -354,61 +391,68 @@
is set KPROBE_FLAG_DISABLED, that kp will be registered but disabled,
so, its handlers aren't hit until calling enable_kprobe(kp).
-NOTE:
-1. With the introduction of the "symbol_name" field to struct kprobe,
-the probepoint address resolution will now be taken care of by the kernel.
-The following will now work:
+.. note::
+
+ 1. With the introduction of the "symbol_name" field to struct kprobe,
+ the probepoint address resolution will now be taken care of by the kernel.
+ The following will now work::
kp.symbol_name = "symbol_name";
-(64-bit powerpc intricacies such as function descriptors are handled
-transparently)
+ (64-bit powerpc intricacies such as function descriptors are handled
+ transparently)
-2. Use the "offset" field of struct kprobe if the offset into the symbol
-to install a probepoint is known. This field is used to calculate the
-probepoint.
+ 2. Use the "offset" field of struct kprobe if the offset into the symbol
+ to install a probepoint is known. This field is used to calculate the
+ probepoint.
-3. Specify either the kprobe "symbol_name" OR the "addr". If both are
-specified, kprobe registration will fail with -EINVAL.
+ 3. Specify either the kprobe "symbol_name" OR the "addr". If both are
+ specified, kprobe registration will fail with -EINVAL.
-4. With CISC architectures (such as i386 and x86_64), the kprobes code
-does not validate if the kprobe.addr is at an instruction boundary.
-Use "offset" with caution.
+ 4. With CISC architectures (such as i386 and x86_64), the kprobes code
+ does not validate if the kprobe.addr is at an instruction boundary.
+ Use "offset" with caution.
register_kprobe() returns 0 on success, or a negative errno otherwise.
-User's pre-handler (kp->pre_handler):
-#include <linux/kprobes.h>
-#include <linux/ptrace.h>
-int pre_handler(struct kprobe *p, struct pt_regs *regs);
+User's pre-handler (kp->pre_handler)::
+
+ #include <linux/kprobes.h>
+ #include <linux/ptrace.h>
+ int pre_handler(struct kprobe *p, struct pt_regs *regs);
Called with p pointing to the kprobe associated with the breakpoint,
and regs pointing to the struct containing the registers saved when
the breakpoint was hit. Return 0 here unless you're a Kprobes geek.
-User's post-handler (kp->post_handler):
-#include <linux/kprobes.h>
-#include <linux/ptrace.h>
-void post_handler(struct kprobe *p, struct pt_regs *regs,
- unsigned long flags);
+User's post-handler (kp->post_handler)::
+
+ #include <linux/kprobes.h>
+ #include <linux/ptrace.h>
+ void post_handler(struct kprobe *p, struct pt_regs *regs,
+ unsigned long flags);
p and regs are as described for the pre_handler. flags always seems
to be zero.
-User's fault-handler (kp->fault_handler):
-#include <linux/kprobes.h>
-#include <linux/ptrace.h>
-int fault_handler(struct kprobe *p, struct pt_regs *regs, int trapnr);
+User's fault-handler (kp->fault_handler)::
+
+ #include <linux/kprobes.h>
+ #include <linux/ptrace.h>
+ int fault_handler(struct kprobe *p, struct pt_regs *regs, int trapnr);
p and regs are as described for the pre_handler. trapnr is the
architecture-specific trap number associated with the fault (e.g.,
on i386, 13 for a general protection fault or 14 for a page fault).
Returns 1 if it successfully handled the exception.
-4.2 register_jprobe
+register_jprobe
+---------------
-#include <linux/kprobes.h>
-int register_jprobe(struct jprobe *jp)
+::
+
+ #include <linux/kprobes.h>
+ int register_jprobe(struct jprobe *jp)
Sets a breakpoint at the address jp->kp.addr, which must be the address
of the first instruction of a function. When the breakpoint is hit,
@@ -423,10 +467,13 @@
register_jprobe() returns 0 on success, or a negative errno otherwise.
-4.3 register_kretprobe
+register_kretprobe
+------------------
-#include <linux/kprobes.h>
-int register_kretprobe(struct kretprobe *rp);
+::
+
+ #include <linux/kprobes.h>
+ int register_kretprobe(struct kretprobe *rp);
Establishes a return probe for the function whose address is
rp->kp.addr. When that function returns, Kprobes calls rp->handler.
@@ -436,14 +483,17 @@
register_kretprobe() returns 0 on success, or a negative errno
otherwise.
-User's return-probe handler (rp->handler):
-#include <linux/kprobes.h>
-#include <linux/ptrace.h>
-int kretprobe_handler(struct kretprobe_instance *ri, struct pt_regs *regs);
+User's return-probe handler (rp->handler)::
+
+ #include <linux/kprobes.h>
+ #include <linux/ptrace.h>
+ int kretprobe_handler(struct kretprobe_instance *ri,
+ struct pt_regs *regs);
regs is as described for kprobe.pre_handler. ri points to the
kretprobe_instance object, of which the following fields may be
of interest:
+
- ret_addr: the return address
- rp: points to the corresponding kretprobe object
- task: points to the corresponding task struct
@@ -456,74 +506,94 @@
The handler's return value is currently ignored.
-4.4 unregister_*probe
+unregister_*probe
+------------------
-#include <linux/kprobes.h>
-void unregister_kprobe(struct kprobe *kp);
-void unregister_jprobe(struct jprobe *jp);
-void unregister_kretprobe(struct kretprobe *rp);
+::
+
+ #include <linux/kprobes.h>
+ void unregister_kprobe(struct kprobe *kp);
+ void unregister_jprobe(struct jprobe *jp);
+ void unregister_kretprobe(struct kretprobe *rp);
Removes the specified probe. The unregister function can be called
at any time after the probe has been registered.
-NOTE:
-If the functions find an incorrect probe (ex. an unregistered probe),
-they clear the addr field of the probe.
+.. note::
-4.5 register_*probes
+ If the functions find an incorrect probe (ex. an unregistered probe),
+ they clear the addr field of the probe.
-#include <linux/kprobes.h>
-int register_kprobes(struct kprobe **kps, int num);
-int register_kretprobes(struct kretprobe **rps, int num);
-int register_jprobes(struct jprobe **jps, int num);
+register_*probes
+----------------
+
+::
+
+ #include <linux/kprobes.h>
+ int register_kprobes(struct kprobe **kps, int num);
+ int register_kretprobes(struct kretprobe **rps, int num);
+ int register_jprobes(struct jprobe **jps, int num);
Registers each of the num probes in the specified array. If any
error occurs during registration, all probes in the array, up to
the bad probe, are safely unregistered before the register_*probes
function returns.
-- kps/rps/jps: an array of pointers to *probe data structures
+
+- kps/rps/jps: an array of pointers to ``*probe`` data structures
- num: the number of the array entries.
-NOTE:
-You have to allocate(or define) an array of pointers and set all
-of the array entries before using these functions.
+.. note::
-4.6 unregister_*probes
+ You have to allocate(or define) an array of pointers and set all
+ of the array entries before using these functions.
-#include <linux/kprobes.h>
-void unregister_kprobes(struct kprobe **kps, int num);
-void unregister_kretprobes(struct kretprobe **rps, int num);
-void unregister_jprobes(struct jprobe **jps, int num);
+unregister_*probes
+------------------
+
+::
+
+ #include <linux/kprobes.h>
+ void unregister_kprobes(struct kprobe **kps, int num);
+ void unregister_kretprobes(struct kretprobe **rps, int num);
+ void unregister_jprobes(struct jprobe **jps, int num);
Removes each of the num probes in the specified array at once.
-NOTE:
-If the functions find some incorrect probes (ex. unregistered
-probes) in the specified array, they clear the addr field of those
-incorrect probes. However, other probes in the array are
-unregistered correctly.
+.. note::
-4.7 disable_*probe
+ If the functions find some incorrect probes (ex. unregistered
+ probes) in the specified array, they clear the addr field of those
+ incorrect probes. However, other probes in the array are
+ unregistered correctly.
-#include <linux/kprobes.h>
-int disable_kprobe(struct kprobe *kp);
-int disable_kretprobe(struct kretprobe *rp);
-int disable_jprobe(struct jprobe *jp);
+disable_*probe
+--------------
-Temporarily disables the specified *probe. You can enable it again by using
+::
+
+ #include <linux/kprobes.h>
+ int disable_kprobe(struct kprobe *kp);
+ int disable_kretprobe(struct kretprobe *rp);
+ int disable_jprobe(struct jprobe *jp);
+
+Temporarily disables the specified ``*probe``. You can enable it again by using
enable_*probe(). You must specify the probe which has been registered.
-4.8 enable_*probe
+enable_*probe
+-------------
-#include <linux/kprobes.h>
-int enable_kprobe(struct kprobe *kp);
-int enable_kretprobe(struct kretprobe *rp);
-int enable_jprobe(struct jprobe *jp);
+::
-Enables *probe which has been disabled by disable_*probe(). You must specify
+ #include <linux/kprobes.h>
+ int enable_kprobe(struct kprobe *kp);
+ int enable_kretprobe(struct kretprobe *rp);
+ int enable_jprobe(struct jprobe *jp);
+
+Enables ``*probe`` which has been disabled by disable_*probe(). You must specify
the probe which has been registered.
-5. Kprobes Features and Limitations
+Kprobes Features and Limitations
+================================
Kprobes allows multiple probes at the same address. Currently,
however, there cannot be multiple jprobes on the same function at
@@ -538,7 +608,7 @@
The register_*probe functions will return -EINVAL if you attempt
to install a probe in the code that implements Kprobes (mostly
-kernel/kprobes.c and arch/*/kernel/kprobes.c, but also functions such
+kernel/kprobes.c and ``arch/*/kernel/kprobes.c``, but also functions such
as do_page_fault and notifier_call_chain).
If you install a probe in an inline-able function, Kprobes makes
@@ -602,19 +672,21 @@
sequence consisting of a two 2-byte instructions and one 3-byte
instruction.
- IA
- |
-[-2][-1][0][1][2][3][4][5][6][7]
- [ins1][ins2][ ins3 ]
- [<- DCR ->]
- [<- JTPR ->]
+::
-ins1: 1st Instruction
-ins2: 2nd Instruction
-ins3: 3rd Instruction
-IA: Insertion Address
-JTPR: Jump Target Prohibition Region
-DCR: Detoured Code Region
+ IA
+ |
+ [-2][-1][0][1][2][3][4][5][6][7]
+ [ins1][ins2][ ins3 ]
+ [<- DCR ->]
+ [<- JTPR ->]
+
+ ins1: 1st Instruction
+ ins2: 2nd Instruction
+ ins3: 3rd Instruction
+ IA: Insertion Address
+ JTPR: Jump Target Prohibition Region
+ DCR: Detoured Code Region
The instructions in DCR are copied to the out-of-line buffer
of the kprobe, because the bytes in DCR are replaced by
@@ -628,7 +700,8 @@
Anyway, these limitations are checked by the in-kernel instruction
decoder, so you don't need to worry about that.
-6. Probe Overhead
+Probe Overhead
+==============
On a typical CPU in use in 2005, a kprobe hit takes 0.5 to 1.0
microseconds to process. Specifically, a benchmark that hits the same
@@ -638,70 +711,80 @@
When you have a return probe set on a function, adding a kprobe at
the entry to that function adds essentially no overhead.
-Here are sample overhead figures (in usec) for different architectures.
-k = kprobe; j = jprobe; r = return probe; kr = kprobe + return probe
-on same function; jr = jprobe + return probe on same function
+Here are sample overhead figures (in usec) for different architectures::
-i386: Intel Pentium M, 1495 MHz, 2957.31 bogomips
-k = 0.57 usec; j = 1.00; r = 0.92; kr = 0.99; jr = 1.40
+ k = kprobe; j = jprobe; r = return probe; kr = kprobe + return probe
+ on same function; jr = jprobe + return probe on same function::
-x86_64: AMD Opteron 246, 1994 MHz, 3971.48 bogomips
-k = 0.49 usec; j = 0.76; r = 0.80; kr = 0.82; jr = 1.07
+ i386: Intel Pentium M, 1495 MHz, 2957.31 bogomips
+ k = 0.57 usec; j = 1.00; r = 0.92; kr = 0.99; jr = 1.40
-ppc64: POWER5 (gr), 1656 MHz (SMT disabled, 1 virtual CPU per physical CPU)
-k = 0.77 usec; j = 1.31; r = 1.26; kr = 1.45; jr = 1.99
+ x86_64: AMD Opteron 246, 1994 MHz, 3971.48 bogomips
+ k = 0.49 usec; j = 0.76; r = 0.80; kr = 0.82; jr = 1.07
-6.1 Optimized Probe Overhead
+ ppc64: POWER5 (gr), 1656 MHz (SMT disabled, 1 virtual CPU per physical CPU)
+ k = 0.77 usec; j = 1.31; r = 1.26; kr = 1.45; jr = 1.99
+
+Optimized Probe Overhead
+------------------------
Typically, an optimized kprobe hit takes 0.07 to 0.1 microseconds to
-process. Here are sample overhead figures (in usec) for x86 architectures.
-k = unoptimized kprobe, b = boosted (single-step skipped), o = optimized kprobe,
-r = unoptimized kretprobe, rb = boosted kretprobe, ro = optimized kretprobe.
+process. Here are sample overhead figures (in usec) for x86 architectures::
-i386: Intel(R) Xeon(R) E5410, 2.33GHz, 4656.90 bogomips
-k = 0.80 usec; b = 0.33; o = 0.05; r = 1.10; rb = 0.61; ro = 0.33
+ k = unoptimized kprobe, b = boosted (single-step skipped), o = optimized kprobe,
+ r = unoptimized kretprobe, rb = boosted kretprobe, ro = optimized kretprobe.
-x86-64: Intel(R) Xeon(R) E5410, 2.33GHz, 4656.90 bogomips
-k = 0.99 usec; b = 0.43; o = 0.06; r = 1.24; rb = 0.68; ro = 0.30
+ i386: Intel(R) Xeon(R) E5410, 2.33GHz, 4656.90 bogomips
+ k = 0.80 usec; b = 0.33; o = 0.05; r = 1.10; rb = 0.61; ro = 0.33
-7. TODO
+ x86-64: Intel(R) Xeon(R) E5410, 2.33GHz, 4656.90 bogomips
+ k = 0.99 usec; b = 0.43; o = 0.06; r = 1.24; rb = 0.68; ro = 0.30
+
+TODO
+====
a. SystemTap (http://sourceware.org/systemtap): Provides a simplified
-programming interface for probe-based instrumentation. Try it out.
+ programming interface for probe-based instrumentation. Try it out.
b. Kernel return probes for sparc64.
c. Support for other architectures.
d. User-space probes.
e. Watchpoint probes (which fire on data references).
-8. Kprobes Example
+Kprobes Example
+===============
See samples/kprobes/kprobe_example.c
-9. Jprobes Example
+Jprobes Example
+===============
See samples/kprobes/jprobe_example.c
-10. Kretprobes Example
+Kretprobes Example
+==================
See samples/kprobes/kretprobe_example.c
For additional information on Kprobes, refer to the following URLs:
-http://www-106.ibm.com/developerworks/library/l-kprobes.html?ca=dgr-lnxw42Kprobe
-http://www.redhat.com/magazine/005mar05/features/kprobes/
-http://www-users.cs.umn.edu/~boutcher/kprobes/
-http://www.linuxsymposium.org/2006/linuxsymposium_procv2.pdf (pages 101-115)
+
+- http://www-106.ibm.com/developerworks/library/l-kprobes.html?ca=dgr-lnxw42Kprobe
+- http://www.redhat.com/magazine/005mar05/features/kprobes/
+- http://www-users.cs.umn.edu/~boutcher/kprobes/
+- http://www.linuxsymposium.org/2006/linuxsymposium_procv2.pdf (pages 101-115)
-Appendix A: The kprobes debugfs interface
+The kprobes debugfs interface
+=============================
+
With recent kernels (> 2.6.20) the list of registered kprobes is visible
under the /sys/kernel/debug/kprobes/ directory (assuming debugfs is mounted at //sys/kernel/debug).
-/sys/kernel/debug/kprobes/list: Lists all registered probes on the system
+/sys/kernel/debug/kprobes/list: Lists all registered probes on the system::
-c015d71a k vfs_read+0x0
-c011a316 j do_fork+0x0
-c03dedc5 r tcp_v4_rcv+0x0
+ c015d71a k vfs_read+0x0
+ c011a316 j do_fork+0x0
+ c03dedc5 r tcp_v4_rcv+0x0
The first column provides the kernel address where the probe is inserted.
The second column identifies the type of probe (k - kprobe, r - kretprobe
@@ -725,17 +808,19 @@
[DISABLED]) will be not enabled if you turn ON all kprobes by this knob.
-Appendix B: The kprobes sysctl interface
+The kprobes sysctl interface
+============================
/proc/sys/debug/kprobes-optimization: Turn kprobes optimization ON/OFF.
When CONFIG_OPTPROBES=y, this sysctl interface appears and it provides
a knob to globally and forcibly turn jump optimization (see section
-1.4) ON or OFF. By default, jump optimization is allowed (ON).
-If you echo "0" to this file or set "debug.kprobes_optimization" to
-0 via sysctl, all optimized probes will be unoptimized, and any new
-probes registered after that will not be optimized. Note that this
-knob *changes* the optimized state. This means that optimized probes
-(marked [OPTIMIZED]) will be unoptimized ([OPTIMIZED] tag will be
+:ref:`kprobes_jump_optimization`) ON or OFF. By default, jump optimization
+is allowed (ON). If you echo "0" to this file or set
+"debug.kprobes_optimization" to 0 via sysctl, all optimized probes will be
+unoptimized, and any new probes registered after that will not be optimized.
+
+Note that this knob *changes* the optimized state. This means that optimized
+probes (marked [OPTIMIZED]) will be unoptimized ([OPTIMIZED] tag will be
removed). If the knob is turned on, they will be optimized again.
diff --git a/Documentation/kref.txt b/Documentation/kref.txt
index d26a27c..3af3841 100644
--- a/Documentation/kref.txt
+++ b/Documentation/kref.txt
@@ -1,24 +1,42 @@
+===================================================
+Adding reference counters (krefs) to kernel objects
+===================================================
+
+:Author: Corey Minyard <minyard@acm.org>
+:Author: Thomas Hellstrom <thellstrom@vmware.com>
+
+A lot of this was lifted from Greg Kroah-Hartman's 2004 OLS paper and
+presentation on krefs, which can be found at:
+
+ - http://www.kroah.com/linux/talks/ols_2004_kref_paper/Reprint-Kroah-Hartman-OLS2004.pdf
+ - http://www.kroah.com/linux/talks/ols_2004_kref_talk/
+
+Introduction
+============
krefs allow you to add reference counters to your objects. If you
have objects that are used in multiple places and passed around, and
you don't have refcounts, your code is almost certainly broken. If
you want refcounts, krefs are the way to go.
-To use a kref, add one to your data structures like:
+To use a kref, add one to your data structures like::
-struct my_data
-{
+ struct my_data
+ {
.
.
struct kref refcount;
.
.
-};
+ };
The kref can occur anywhere within the data structure.
+Initialization
+==============
+
You must initialize the kref after you allocate it. To do this, call
-kref_init as so:
+kref_init as so::
struct my_data *data;
@@ -29,18 +47,25 @@
This sets the refcount in the kref to 1.
+Kref rules
+==========
+
Once you have an initialized kref, you must follow the following
rules:
1) If you make a non-temporary copy of a pointer, especially if
it can be passed to another thread of execution, you must
- increment the refcount with kref_get() before passing it off:
+ increment the refcount with kref_get() before passing it off::
+
kref_get(&data->refcount);
+
If you already have a valid pointer to a kref-ed structure (the
refcount cannot go to zero) you may do this without a lock.
-2) When you are done with a pointer, you must call kref_put():
+2) When you are done with a pointer, you must call kref_put()::
+
kref_put(&data->refcount, data_release);
+
If this is the last reference to the pointer, the release
routine will be called. If the code never tries to get
a valid pointer to a kref-ed structure without already
@@ -53,25 +78,25 @@
structure must remain valid during the kref_get().
For example, if you allocate some data and then pass it to another
-thread to process:
+thread to process::
-void data_release(struct kref *ref)
-{
+ void data_release(struct kref *ref)
+ {
struct my_data *data = container_of(ref, struct my_data, refcount);
kfree(data);
-}
+ }
-void more_data_handling(void *cb_data)
-{
+ void more_data_handling(void *cb_data)
+ {
struct my_data *data = cb_data;
.
. do stuff with data here
.
kref_put(&data->refcount, data_release);
-}
+ }
-int my_data_handler(void)
-{
+ int my_data_handler(void)
+ {
int rv = 0;
struct my_data *data;
struct task_struct *task;
@@ -91,10 +116,10 @@
.
. do stuff with data here
.
- out:
+ out:
kref_put(&data->refcount, data_release);
return rv;
-}
+ }
This way, it doesn't matter what order the two threads handle the
data, the kref_put() handles knowing when the data is not referenced
@@ -104,7 +129,7 @@
already holding a pointer.
Note that the "before" in rule 1 is very important. You should never
-do something like:
+do something like::
task = kthread_run(more_data_handling, data, "more_data_handling");
if (task == ERR_PTR(-ENOMEM)) {
@@ -124,14 +149,14 @@
There are some situations where you can optimize the gets and puts.
For instance, if you are done with an object and enqueuing it for
something else or passing it off to something else, there is no reason
-to do a get then a put:
+to do a get then a put::
/* Silly extra get and put */
kref_get(&obj->ref);
enqueue(obj);
kref_put(&obj->ref, obj_cleanup);
-Just do the enqueue. A comment about this is always welcome:
+Just do the enqueue. A comment about this is always welcome::
enqueue(obj);
/* We are done with obj, so we pass our refcount off
@@ -142,109 +167,99 @@
to get the first one. You can't just pull the first item off the list
and kref_get() it. That violates rule 3 because you are not already
holding a valid pointer. You must add a mutex (or some other lock).
-For instance:
+For instance::
-static DEFINE_MUTEX(mutex);
-static LIST_HEAD(q);
-struct my_data
-{
- struct kref refcount;
- struct list_head link;
-};
+ static DEFINE_MUTEX(mutex);
+ static LIST_HEAD(q);
+ struct my_data
+ {
+ struct kref refcount;
+ struct list_head link;
+ };
-static struct my_data *get_entry()
-{
- struct my_data *entry = NULL;
- mutex_lock(&mutex);
- if (!list_empty(&q)) {
- entry = container_of(q.next, struct my_data, link);
- kref_get(&entry->refcount);
+ static struct my_data *get_entry()
+ {
+ struct my_data *entry = NULL;
+ mutex_lock(&mutex);
+ if (!list_empty(&q)) {
+ entry = container_of(q.next, struct my_data, link);
+ kref_get(&entry->refcount);
+ }
+ mutex_unlock(&mutex);
+ return entry;
}
- mutex_unlock(&mutex);
- return entry;
-}
-static void release_entry(struct kref *ref)
-{
- struct my_data *entry = container_of(ref, struct my_data, refcount);
+ static void release_entry(struct kref *ref)
+ {
+ struct my_data *entry = container_of(ref, struct my_data, refcount);
- list_del(&entry->link);
- kfree(entry);
-}
+ list_del(&entry->link);
+ kfree(entry);
+ }
-static void put_entry(struct my_data *entry)
-{
- mutex_lock(&mutex);
- kref_put(&entry->refcount, release_entry);
- mutex_unlock(&mutex);
-}
+ static void put_entry(struct my_data *entry)
+ {
+ mutex_lock(&mutex);
+ kref_put(&entry->refcount, release_entry);
+ mutex_unlock(&mutex);
+ }
The kref_put() return value is useful if you do not want to hold the
lock during the whole release operation. Say you didn't want to call
kfree() with the lock held in the example above (since it is kind of
-pointless to do so). You could use kref_put() as follows:
+pointless to do so). You could use kref_put() as follows::
-static void release_entry(struct kref *ref)
-{
- /* All work is done after the return from kref_put(). */
-}
+ static void release_entry(struct kref *ref)
+ {
+ /* All work is done after the return from kref_put(). */
+ }
-static void put_entry(struct my_data *entry)
-{
- mutex_lock(&mutex);
- if (kref_put(&entry->refcount, release_entry)) {
- list_del(&entry->link);
- mutex_unlock(&mutex);
- kfree(entry);
- } else
- mutex_unlock(&mutex);
-}
+ static void put_entry(struct my_data *entry)
+ {
+ mutex_lock(&mutex);
+ if (kref_put(&entry->refcount, release_entry)) {
+ list_del(&entry->link);
+ mutex_unlock(&mutex);
+ kfree(entry);
+ } else
+ mutex_unlock(&mutex);
+ }
This is really more useful if you have to call other routines as part
of the free operations that could take a long time or might claim the
same lock. Note that doing everything in the release routine is still
preferred as it is a little neater.
-
-Corey Minyard <minyard@acm.org>
-
-A lot of this was lifted from Greg Kroah-Hartman's 2004 OLS paper and
-presentation on krefs, which can be found at:
- http://www.kroah.com/linux/talks/ols_2004_kref_paper/Reprint-Kroah-Hartman-OLS2004.pdf
-and:
- http://www.kroah.com/linux/talks/ols_2004_kref_talk/
-
-
The above example could also be optimized using kref_get_unless_zero() in
-the following way:
+the following way::
-static struct my_data *get_entry()
-{
- struct my_data *entry = NULL;
- mutex_lock(&mutex);
- if (!list_empty(&q)) {
- entry = container_of(q.next, struct my_data, link);
- if (!kref_get_unless_zero(&entry->refcount))
- entry = NULL;
+ static struct my_data *get_entry()
+ {
+ struct my_data *entry = NULL;
+ mutex_lock(&mutex);
+ if (!list_empty(&q)) {
+ entry = container_of(q.next, struct my_data, link);
+ if (!kref_get_unless_zero(&entry->refcount))
+ entry = NULL;
+ }
+ mutex_unlock(&mutex);
+ return entry;
}
- mutex_unlock(&mutex);
- return entry;
-}
-static void release_entry(struct kref *ref)
-{
- struct my_data *entry = container_of(ref, struct my_data, refcount);
+ static void release_entry(struct kref *ref)
+ {
+ struct my_data *entry = container_of(ref, struct my_data, refcount);
- mutex_lock(&mutex);
- list_del(&entry->link);
- mutex_unlock(&mutex);
- kfree(entry);
-}
+ mutex_lock(&mutex);
+ list_del(&entry->link);
+ mutex_unlock(&mutex);
+ kfree(entry);
+ }
-static void put_entry(struct my_data *entry)
-{
- kref_put(&entry->refcount, release_entry);
-}
+ static void put_entry(struct my_data *entry)
+ {
+ kref_put(&entry->refcount, release_entry);
+ }
Which is useful to remove the mutex lock around kref_put() in put_entry(), but
it's important that kref_get_unless_zero is enclosed in the same critical
@@ -254,51 +269,51 @@
return value. If you are sure (by already having a valid pointer) that
kref_get_unless_zero() will return true, then use kref_get() instead.
+Krefs and RCU
+=============
+
The function kref_get_unless_zero also makes it possible to use rcu
-locking for lookups in the above example:
+locking for lookups in the above example::
-struct my_data
-{
- struct rcu_head rhead;
- .
- struct kref refcount;
- .
- .
-};
+ struct my_data
+ {
+ struct rcu_head rhead;
+ .
+ struct kref refcount;
+ .
+ .
+ };
-static struct my_data *get_entry_rcu()
-{
- struct my_data *entry = NULL;
- rcu_read_lock();
- if (!list_empty(&q)) {
- entry = container_of(q.next, struct my_data, link);
- if (!kref_get_unless_zero(&entry->refcount))
- entry = NULL;
+ static struct my_data *get_entry_rcu()
+ {
+ struct my_data *entry = NULL;
+ rcu_read_lock();
+ if (!list_empty(&q)) {
+ entry = container_of(q.next, struct my_data, link);
+ if (!kref_get_unless_zero(&entry->refcount))
+ entry = NULL;
+ }
+ rcu_read_unlock();
+ return entry;
}
- rcu_read_unlock();
- return entry;
-}
-static void release_entry_rcu(struct kref *ref)
-{
- struct my_data *entry = container_of(ref, struct my_data, refcount);
+ static void release_entry_rcu(struct kref *ref)
+ {
+ struct my_data *entry = container_of(ref, struct my_data, refcount);
- mutex_lock(&mutex);
- list_del_rcu(&entry->link);
- mutex_unlock(&mutex);
- kfree_rcu(entry, rhead);
-}
+ mutex_lock(&mutex);
+ list_del_rcu(&entry->link);
+ mutex_unlock(&mutex);
+ kfree_rcu(entry, rhead);
+ }
-static void put_entry(struct my_data *entry)
-{
- kref_put(&entry->refcount, release_entry_rcu);
-}
+ static void put_entry(struct my_data *entry)
+ {
+ kref_put(&entry->refcount, release_entry_rcu);
+ }
But note that the struct kref member needs to remain in valid memory for a
rcu grace period after release_entry_rcu was called. That can be accomplished
by using kfree_rcu(entry, rhead) as done above, or by calling synchronize_rcu()
before using kfree, but note that synchronize_rcu() may sleep for a
substantial amount of time.
-
-
-Thomas Hellstrom <thellstrom@vmware.com>
diff --git a/Documentation/ldm.txt b/Documentation/ldm.txt
index 4f80edd..12c5713 100644
--- a/Documentation/ldm.txt
+++ b/Documentation/ldm.txt
@@ -1,9 +1,9 @@
+==========================================
+LDM - Logical Disk Manager (Dynamic Disks)
+==========================================
- LDM - Logical Disk Manager (Dynamic Disks)
- ------------------------------------------
-
-Originally Written by FlatCap - Richard Russon <ldm@flatcap.org>.
-Last Updated by Anton Altaparmakov on 30 March 2007 for Windows Vista.
+:Author: Originally Written by FlatCap - Richard Russon <ldm@flatcap.org>.
+:Last Updated: Anton Altaparmakov on 30 March 2007 for Windows Vista.
Overview
--------
@@ -37,24 +37,36 @@
-------
Below we have a 50MiB disk, divided into seven partitions.
-N.B. The missing 1MiB at the end of the disk is where the LDM database is
- stored.
- Device | Offset Bytes Sectors MiB | Size Bytes Sectors MiB
- -------+----------------------------+---------------------------
- hda | 0 0 0 | 52428800 102400 50
- hda1 | 51380224 100352 49 | 1048576 2048 1
- hda2 | 16384 32 0 | 6979584 13632 6
- hda3 | 6995968 13664 6 | 10485760 20480 10
- hda4 | 17481728 34144 16 | 4194304 8192 4
- hda5 | 21676032 42336 20 | 5242880 10240 5
- hda6 | 26918912 52576 25 | 10485760 20480 10
- hda7 | 37404672 73056 35 | 13959168 27264 13
+.. note::
+
+ The missing 1MiB at the end of the disk is where the LDM database is
+ stored.
+
++-------++--------------+---------+-----++--------------+---------+----+
+|Device || Offset Bytes | Sectors | MiB || Size Bytes | Sectors | MiB|
++=======++==============+=========+=====++==============+=========+====+
+|hda || 0 | 0 | 0 || 52428800 | 102400 | 50|
++-------++--------------+---------+-----++--------------+---------+----+
+|hda1 || 51380224 | 100352 | 49 || 1048576 | 2048 | 1|
++-------++--------------+---------+-----++--------------+---------+----+
+|hda2 || 16384 | 32 | 0 || 6979584 | 13632 | 6|
++-------++--------------+---------+-----++--------------+---------+----+
+|hda3 || 6995968 | 13664 | 6 || 10485760 | 20480 | 10|
++-------++--------------+---------+-----++--------------+---------+----+
+|hda4 || 17481728 | 34144 | 16 || 4194304 | 8192 | 4|
++-------++--------------+---------+-----++--------------+---------+----+
+|hda5 || 21676032 | 42336 | 20 || 5242880 | 10240 | 5|
++-------++--------------+---------+-----++--------------+---------+----+
+|hda6 || 26918912 | 52576 | 25 || 10485760 | 20480 | 10|
++-------++--------------+---------+-----++--------------+---------+----+
+|hda7 || 37404672 | 73056 | 35 || 13959168 | 27264 | 13|
++-------++--------------+---------+-----++--------------+---------+----+
The LDM Database may not store the partitions in the order that they appear on
disk, but the driver will sort them.
-When Linux boots, you will see something like:
+When Linux boots, you will see something like::
hda: 102400 sectors w/32KiB Cache, CHS=50/64/32
hda: [LDM] hda1 hda2 hda3 hda4 hda5 hda6 hda7
@@ -65,13 +77,13 @@
To enable LDM, choose the following two options:
- "Advanced partition selection" CONFIG_PARTITION_ADVANCED
- "Windows Logical Disk Manager (Dynamic Disk) support" CONFIG_LDM_PARTITION
+ - "Advanced partition selection" CONFIG_PARTITION_ADVANCED
+ - "Windows Logical Disk Manager (Dynamic Disk) support" CONFIG_LDM_PARTITION
If you believe the driver isn't working as it should, you can enable the extra
debugging code. This will produce a LOT of output. The option is:
- "Windows LDM extra logging" CONFIG_LDM_DEBUG
+ - "Windows LDM extra logging" CONFIG_LDM_DEBUG
N.B. The partition code cannot be compiled as a module.
diff --git a/Documentation/lockup-watchdogs.txt b/Documentation/lockup-watchdogs.txt
index c8b8378..290840c 100644
--- a/Documentation/lockup-watchdogs.txt
+++ b/Documentation/lockup-watchdogs.txt
@@ -30,7 +30,8 @@
to cause the system to reboot automatically after a specified amount
of time.
-=== Implementation ===
+Implementation
+==============
The soft and hard lockup detectors are built on top of the hrtimer and
perf subsystems, respectively. A direct consequence of this is that,
diff --git a/Documentation/lzo.txt b/Documentation/lzo.txt
index 285c54f..6fa6a93 100644
--- a/Documentation/lzo.txt
+++ b/Documentation/lzo.txt
@@ -1,8 +1,9 @@
-
+===========================================================
LZO stream format as understood by Linux's LZO decompressor
===========================================================
Introduction
+============
This is not a specification. No specification seems to be publicly available
for the LZO stream format. This document describes what input format the LZO
@@ -14,12 +15,13 @@
for future bug reports.
Description
+===========
The stream is composed of a series of instructions, operands, and data. The
instructions consist in a few bits representing an opcode, and bits forming
the operands for the instruction, whose size and position depend on the
opcode and on the number of literals copied by previous instruction. The
- operands are used to indicate :
+ operands are used to indicate:
- a distance when copying data from the dictionary (past output buffer)
- a length (number of bytes to copy from dictionary)
@@ -38,7 +40,7 @@
of bits in the operand. If the number of bits isn't enough to represent the
length, up to 255 may be added in increments by consuming more bytes with a
rate of at most 255 per extra byte (thus the compression ratio cannot exceed
- around 255:1). The variable length encoding using #bits is always the same :
+ around 255:1). The variable length encoding using #bits is always the same::
length = byte & ((1 << #bits) - 1)
if (!length) {
@@ -67,15 +69,19 @@
instruction may encode this distance (0001HLLL), it takes one LE16 operand
for the distance, thus requiring 3 bytes.
- IMPORTANT NOTE : in the code some length checks are missing because certain
- instructions are called under the assumption that a certain number of bytes
- follow because it has already been guaranteed before parsing the instructions.
- They just have to "refill" this credit if they consume extra bytes. This is
- an implementation design choice independent on the algorithm or encoding.
+ .. important::
+
+ In the code some length checks are missing because certain instructions
+ are called under the assumption that a certain number of bytes follow
+ because it has already been guaranteed before parsing the instructions.
+ They just have to "refill" this credit if they consume extra bytes. This
+ is an implementation design choice independent on the algorithm or
+ encoding.
Byte sequences
+==============
- First byte encoding :
+ First byte encoding::
0..17 : follow regular instruction encoding, see below. It is worth
noting that codes 16 and 17 will represent a block copy from
@@ -91,7 +97,7 @@
state = 4 [ don't copy extra literals ]
skip byte
- Instruction encoding :
+ Instruction encoding::
0 0 0 0 X X X X (0..15)
Depends on the number of literals copied by the last instruction.
@@ -156,6 +162,7 @@
distance = (H << 3) + D + 1
Authors
+=======
This document was written by Willy Tarreau <w@1wt.eu> on 2014/07/19 during an
analysis of the decompression code available in Linux 3.16-rc5. The code is
diff --git a/Documentation/mailbox.txt b/Documentation/mailbox.txt
index 7ed371c..0ed9500 100644
--- a/Documentation/mailbox.txt
+++ b/Documentation/mailbox.txt
@@ -1,7 +1,10 @@
- The Common Mailbox Framework
- Jassi Brar <jaswinder.singh@linaro.org>
+============================
+The Common Mailbox Framework
+============================
- This document aims to help developers write client and controller
+:Author: Jassi Brar <jaswinder.singh@linaro.org>
+
+This document aims to help developers write client and controller
drivers for the API. But before we start, let us note that the
client (especially) and controller drivers are likely going to be
very platform specific because the remote firmware is likely to be
@@ -13,14 +16,17 @@
nothing prevents the remote f/w to also be Linux based and use the
same api there. However none of that helps us locally because we only
ever deal at client's protocol level.
- Some of the choices made during implementation are the result of this
+
+Some of the choices made during implementation are the result of this
peculiarity of this "common" framework.
- Part 1 - Controller Driver (See include/linux/mailbox_controller.h)
+Controller Driver (See include/linux/mailbox_controller.h)
+==========================================================
- Allocate mbox_controller and the array of mbox_chan.
+
+Allocate mbox_controller and the array of mbox_chan.
Populate mbox_chan_ops, except peek_data() all are mandatory.
The controller driver might know a message has been consumed
by the remote by getting an IRQ or polling some hardware flag
@@ -30,91 +36,94 @@
or neither.
- Part 2 - Client Driver (See include/linux/mailbox_client.h)
+Client Driver (See include/linux/mailbox_client.h)
+==================================================
- The client might want to operate in blocking mode (synchronously
+
+The client might want to operate in blocking mode (synchronously
send a message through before returning) or non-blocking/async mode (submit
a message and a callback function to the API and return immediately).
+::
-struct demo_client {
- struct mbox_client cl;
- struct mbox_chan *mbox;
- struct completion c;
- bool async;
- /* ... */
-};
+ struct demo_client {
+ struct mbox_client cl;
+ struct mbox_chan *mbox;
+ struct completion c;
+ bool async;
+ /* ... */
+ };
-/*
- * This is the handler for data received from remote. The behaviour is purely
- * dependent upon the protocol. This is just an example.
- */
-static void message_from_remote(struct mbox_client *cl, void *mssg)
-{
- struct demo_client *dc = container_of(cl, struct demo_client, cl);
- if (dc->async) {
- if (is_an_ack(mssg)) {
- /* An ACK to our last sample sent */
- return; /* Or do something else here */
- } else { /* A new message from remote */
- queue_req(mssg);
+ /*
+ * This is the handler for data received from remote. The behaviour is purely
+ * dependent upon the protocol. This is just an example.
+ */
+ static void message_from_remote(struct mbox_client *cl, void *mssg)
+ {
+ struct demo_client *dc = container_of(cl, struct demo_client, cl);
+ if (dc->async) {
+ if (is_an_ack(mssg)) {
+ /* An ACK to our last sample sent */
+ return; /* Or do something else here */
+ } else { /* A new message from remote */
+ queue_req(mssg);
+ }
+ } else {
+ /* Remote f/w sends only ACK packets on this channel */
+ return;
}
- } else {
- /* Remote f/w sends only ACK packets on this channel */
- return;
}
-}
-static void sample_sent(struct mbox_client *cl, void *mssg, int r)
-{
- struct demo_client *dc = container_of(cl, struct demo_client, cl);
- complete(&dc->c);
-}
+ static void sample_sent(struct mbox_client *cl, void *mssg, int r)
+ {
+ struct demo_client *dc = container_of(cl, struct demo_client, cl);
+ complete(&dc->c);
+ }
-static void client_demo(struct platform_device *pdev)
-{
- struct demo_client *dc_sync, *dc_async;
- /* The controller already knows async_pkt and sync_pkt */
- struct async_pkt ap;
- struct sync_pkt sp;
+ static void client_demo(struct platform_device *pdev)
+ {
+ struct demo_client *dc_sync, *dc_async;
+ /* The controller already knows async_pkt and sync_pkt */
+ struct async_pkt ap;
+ struct sync_pkt sp;
- dc_sync = kzalloc(sizeof(*dc_sync), GFP_KERNEL);
- dc_async = kzalloc(sizeof(*dc_async), GFP_KERNEL);
+ dc_sync = kzalloc(sizeof(*dc_sync), GFP_KERNEL);
+ dc_async = kzalloc(sizeof(*dc_async), GFP_KERNEL);
- /* Populate non-blocking mode client */
- dc_async->cl.dev = &pdev->dev;
- dc_async->cl.rx_callback = message_from_remote;
- dc_async->cl.tx_done = sample_sent;
- dc_async->cl.tx_block = false;
- dc_async->cl.tx_tout = 0; /* doesn't matter here */
- dc_async->cl.knows_txdone = false; /* depending upon protocol */
- dc_async->async = true;
- init_completion(&dc_async->c);
+ /* Populate non-blocking mode client */
+ dc_async->cl.dev = &pdev->dev;
+ dc_async->cl.rx_callback = message_from_remote;
+ dc_async->cl.tx_done = sample_sent;
+ dc_async->cl.tx_block = false;
+ dc_async->cl.tx_tout = 0; /* doesn't matter here */
+ dc_async->cl.knows_txdone = false; /* depending upon protocol */
+ dc_async->async = true;
+ init_completion(&dc_async->c);
- /* Populate blocking mode client */
- dc_sync->cl.dev = &pdev->dev;
- dc_sync->cl.rx_callback = message_from_remote;
- dc_sync->cl.tx_done = NULL; /* operate in blocking mode */
- dc_sync->cl.tx_block = true;
- dc_sync->cl.tx_tout = 500; /* by half a second */
- dc_sync->cl.knows_txdone = false; /* depending upon protocol */
- dc_sync->async = false;
+ /* Populate blocking mode client */
+ dc_sync->cl.dev = &pdev->dev;
+ dc_sync->cl.rx_callback = message_from_remote;
+ dc_sync->cl.tx_done = NULL; /* operate in blocking mode */
+ dc_sync->cl.tx_block = true;
+ dc_sync->cl.tx_tout = 500; /* by half a second */
+ dc_sync->cl.knows_txdone = false; /* depending upon protocol */
+ dc_sync->async = false;
- /* ASync mailbox is listed second in 'mboxes' property */
- dc_async->mbox = mbox_request_channel(&dc_async->cl, 1);
- /* Populate data packet */
- /* ap.xxx = 123; etc */
- /* Send async message to remote */
- mbox_send_message(dc_async->mbox, &ap);
+ /* ASync mailbox is listed second in 'mboxes' property */
+ dc_async->mbox = mbox_request_channel(&dc_async->cl, 1);
+ /* Populate data packet */
+ /* ap.xxx = 123; etc */
+ /* Send async message to remote */
+ mbox_send_message(dc_async->mbox, &ap);
- /* Sync mailbox is listed first in 'mboxes' property */
- dc_sync->mbox = mbox_request_channel(&dc_sync->cl, 0);
- /* Populate data packet */
- /* sp.abc = 123; etc */
- /* Send message to remote in blocking mode */
- mbox_send_message(dc_sync->mbox, &sp);
- /* At this point 'sp' has been sent */
+ /* Sync mailbox is listed first in 'mboxes' property */
+ dc_sync->mbox = mbox_request_channel(&dc_sync->cl, 0);
+ /* Populate data packet */
+ /* sp.abc = 123; etc */
+ /* Send message to remote in blocking mode */
+ mbox_send_message(dc_sync->mbox, &sp);
+ /* At this point 'sp' has been sent */
- /* Now wait for async chan to be done */
- wait_for_completion(&dc_async->c);
-}
+ /* Now wait for async chan to be done */
+ wait_for_completion(&dc_async->c);
+ }
diff --git a/Documentation/media/kapi/dtv-core.rst b/Documentation/media/kapi/dtv-core.rst
index ff86bf0a..de9a228 100644
--- a/Documentation/media/kapi/dtv-core.rst
+++ b/Documentation/media/kapi/dtv-core.rst
@@ -1,6 +1,31 @@
Digital TV (DVB) devices
------------------------
+Digital TV devices are implemented by several different drivers:
+
+- A bridge driver that is responsible to talk with the bus where the other
+ devices are connected (PCI, USB, SPI), bind to the other drivers and
+ implement the digital demux logic (either in software or in hardware);
+
+- Frontend drivers that are usually implemented as two separate drivers:
+
+ - A tuner driver that implements the logic with commands the part of the
+ hardware with is reponsible to tune into a digital TV transponder or
+ physical channel. The output of a tuner is usually a baseband or
+ Intermediate Frequency (IF) signal;
+
+ - A demodulator driver (a.k.a "demod") that implements the logic with
+ commands the digital TV decoding hardware. The output of a demod is
+ a digital stream, with multiple audio, video and data channels typically
+ multiplexed using MPEG Transport Stream [#f1]_.
+
+On most hardware, the frontend drivers talk with the bridge driver using an
+I2C bus.
+
+.. [#f1] Some standards use TCP/IP for multiplexing data, like DVB-H (an
+ abandoned standard, not used anymore) and ATSC version 3.0 current
+ proposals. Currently, the DVB subsystem doesn't implement those standards.
+
Digital TV Common functions
---------------------------
@@ -55,8 +80,141 @@
The Digital TV Frontend kABI defines a driver-internal interface for
registering low-level, hardware specific driver to a hardware independent
frontend layer. It is only of interest for Digital TV device driver writers.
-The header file for this API is named dvb_frontend.h and located in
-drivers/media/dvb-core.
+The header file for this API is named ``dvb_frontend.h`` and located in
+``drivers/media/dvb-core``.
+
+Demodulator driver
+^^^^^^^^^^^^^^^^^^
+
+The demodulator driver is responsible to talk with the decoding part of the
+hardware. Such driver should implement :c:type:`dvb_frontend_ops`, with
+tells what type of digital TV standards are supported, and points to a
+series of functions that allow the DVB core to command the hardware via
+the code under ``drivers/media/dvb-core/dvb_frontend.c``.
+
+A typical example of such struct in a driver ``foo`` is::
+
+ static struct dvb_frontend_ops foo_ops = {
+ .delsys = { SYS_DVBT, SYS_DVBT2, SYS_DVBC_ANNEX_A },
+ .info = {
+ .name = "foo DVB-T/T2/C driver",
+ .caps = FE_CAN_FEC_1_2 |
+ FE_CAN_FEC_2_3 |
+ FE_CAN_FEC_3_4 |
+ FE_CAN_FEC_5_6 |
+ FE_CAN_FEC_7_8 |
+ FE_CAN_FEC_AUTO |
+ FE_CAN_QPSK |
+ FE_CAN_QAM_16 |
+ FE_CAN_QAM_32 |
+ FE_CAN_QAM_64 |
+ FE_CAN_QAM_128 |
+ FE_CAN_QAM_256 |
+ FE_CAN_QAM_AUTO |
+ FE_CAN_TRANSMISSION_MODE_AUTO |
+ FE_CAN_GUARD_INTERVAL_AUTO |
+ FE_CAN_HIERARCHY_AUTO |
+ FE_CAN_MUTE_TS |
+ FE_CAN_2G_MODULATION,
+ .frequency_min = 42000000, /* Hz */
+ .frequency_max = 1002000000, /* Hz */
+ .symbol_rate_min = 870000,
+ .symbol_rate_max = 11700000
+ },
+ .init = foo_init,
+ .sleep = foo_sleep,
+ .release = foo_release,
+ .set_frontend = foo_set_frontend,
+ .get_frontend = foo_get_frontend,
+ .read_status = foo_get_status_and_stats,
+ .tune = foo_tune,
+ .i2c_gate_ctrl = foo_i2c_gate_ctrl,
+ .get_frontend_algo = foo_get_algo,
+ };
+
+A typical example of such struct in a driver ``bar`` meant to be used on
+Satellite TV reception is::
+
+ static const struct dvb_frontend_ops bar_ops = {
+ .delsys = { SYS_DVBS, SYS_DVBS2 },
+ .info = {
+ .name = "Bar DVB-S/S2 demodulator",
+ .frequency_min = 500000, /* KHz */
+ .frequency_max = 2500000, /* KHz */
+ .frequency_stepsize = 0,
+ .symbol_rate_min = 1000000,
+ .symbol_rate_max = 45000000,
+ .symbol_rate_tolerance = 500,
+ .caps = FE_CAN_INVERSION_AUTO |
+ FE_CAN_FEC_AUTO |
+ FE_CAN_QPSK,
+ },
+ .init = bar_init,
+ .sleep = bar_sleep,
+ .release = bar_release,
+ .set_frontend = bar_set_frontend,
+ .get_frontend = bar_get_frontend,
+ .read_status = bar_get_status_and_stats,
+ .i2c_gate_ctrl = bar_i2c_gate_ctrl,
+ .get_frontend_algo = bar_get_algo,
+ .tune = bar_tune,
+
+ /* Satellite-specific */
+ .diseqc_send_master_cmd = bar_send_diseqc_msg,
+ .diseqc_send_burst = bar_send_burst,
+ .set_tone = bar_set_tone,
+ .set_voltage = bar_set_voltage,
+ };
+
+.. note::
+
+ #) For satellite digital TV standards (DVB-S, DVB-S2, ISDB-S), the
+ frequencies are specified in kHz, while, for terrestrial and cable
+ standards, they're specified in Hz. Due to that, if the same frontend
+ supports both types, you'll need to have two separate
+ :c:type:`dvb_frontend_ops` structures, one for each standard.
+ #) The ``.i2c_gate_ctrl`` field is present only when the hardware has
+ allows controlling an I2C gate (either directly of via some GPIO pin),
+ in order to remove the tuner from the I2C bus after a channel is
+ tuned.
+ #) All new drivers should implement the
+ :ref:`DVBv5 statistics <dvbv5_stats>` via ``.read_status``.
+ Yet, there are a number of callbacks meant to get statistics for
+ signal strength, S/N and UCB. Those are there to provide backward
+ compatibility with legacy applications that don't support the DVBv5
+ API. Implementing those callbacks are optional. Those callbacks may be
+ removed in the future, after we have all existing drivers supporting
+ DVBv5 stats.
+ #) Other callbacks are required for satellite TV standards, in order to
+ control LNBf and DiSEqC: ``.diseqc_send_master_cmd``,
+ ``.diseqc_send_burst``, ``.set_tone``, ``.set_voltage``.
+
+.. |delta| unicode:: U+00394
+
+The ``drivers/media/dvb-core/dvb_frontend.c`` has a kernel thread with is
+responsible for tuning the device. It supports multiple algoritms to
+detect a channel, as defined at enum :c:func:`dvbfe_algo`.
+
+The algorithm to be used is obtained via ``.get_frontend_algo``. If the driver
+doesn't fill its field at struct :c:type:`dvb_frontend_ops`, it will default to
+``DVBFE_ALGO_SW``, meaning that the dvb-core will do a zigzag when tuning,
+e. g. it will try first to use the specified center frequency ``f``,
+then, it will do ``f`` + |delta|, ``f`` - |delta|, ``f`` + 2 x |delta|,
+``f`` - 2 x |delta| and so on.
+
+If the hardware has internally a some sort of zigzag algorithm, you should
+define a ``.get_frontend_algo`` function that would return ``DVBFE_ALGO_HW``.
+
+.. note::
+
+ The core frontend support also supports
+ a third type (``DVBFE_ALGO_CUSTOM``), in order to allow the driver to
+ define its own hardware-assisted algorithm. Very few hardware need to
+ use it nowadays. Using ``DVBFE_ALGO_CUSTOM`` require to provide other
+ function callbacks at struct :c:type:`dvb_frontend_ops`.
+
+Attaching frontend driver to the bridge driver
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Before using the Digital TV frontend core, the bridge driver should attach
the frontend demod, tuner and SEC devices and call
@@ -74,6 +232,287 @@
A few other optional functions are provided to handle some special cases.
+.. _dvbv5_stats:
+
+Digital TV Frontend statistics
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Introduction
+^^^^^^^^^^^^
+
+Digital TV frontends provide a range of
+:ref:`statistics <frontend-stat-properties>` meant to help tuning the device
+and measuring the quality of service.
+
+For each statistics measurement, the driver should set the type of scale used,
+or ``FE_SCALE_NOT_AVAILABLE`` if the statistics is not available on a given
+time. Drivers should also provide the number of statistics for each type.
+that's usually 1 for most video standards [#f2]_.
+
+Drivers should initialize each statistic counters with length and
+scale at its init code. For example, if the frontend provides signal
+strength, it should have, on its init code::
+
+ struct dtv_frontend_properties *c = &state->fe.dtv_property_cache;
+
+ c->strength.len = 1;
+ c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+
+And, when the statistics got updated, set the scale::
+
+ c->strength.stat[0].scale = FE_SCALE_DECIBEL;
+ c->strength.stat[0].uvalue = strength;
+
+.. [#f2] For ISDB-T, it may provide both a global statistics and a per-layer
+ set of statistics. On such cases, len should be equal to 4. The first
+ value corresponds to the global stat; the other ones to each layer, e. g.:
+
+ - c->cnr.stat[0] for global S/N carrier ratio,
+ - c->cnr.stat[1] for Layer A S/N carrier ratio,
+ - c->cnr.stat[2] for layer B S/N carrier ratio,
+ - c->cnr.stat[3] for layer C S/N carrier ratio.
+
+.. note:: Please prefer to use ``FE_SCALE_DECIBEL`` instead of
+ ``FE_SCALE_RELATIVE`` for signal strength and CNR measurements.
+
+Groups of statistics
+^^^^^^^^^^^^^^^^^^^^
+
+There are several groups of statistics currently supported:
+
+Signal strength (:ref:`DTV-STAT-SIGNAL-STRENGTH`)
+ - Measures the signal strength level at the analog part of the tuner or
+ demod.
+
+ - Typically obtained from the gain applied to the tuner and/or frontend
+ in order to detect the carrier. When no carrier is detected, the gain is
+ at the maximum value (so, strength is on its minimal).
+
+ - As the gain is visible through the set of registers that adjust the gain,
+ typically, this statistics is always available [#f3]_.
+
+ - Drivers should try to make it available all the times, as this statistics
+ can be used when adjusting an antenna position and to check for troubles
+ at the cabling.
+
+ .. [#f3] On a few devices, the gain keeps floating if no carrier.
+ On such devices, strength report should check first if carrier is
+ detected at the tuner (``FE_HAS_CARRIER``, see :c:type:`fe_status`),
+ and otherwise return the lowest possible value.
+
+Carrier Signal to Noise ratio (:ref:`DTV-STAT-CNR`)
+ - Signal to Noise ratio for the main carrier.
+
+ - Signal to Noise measurement depends on the device. On some hardware, is
+ available when the main carrier is detected. On those hardware, CNR
+ measurement usually comes from the tuner (e. g. after ``FE_HAS_CARRIER``,
+ see :c:type:`fe_status`).
+
+ On other devices, it requires inner FEC decoding,
+ as the frontend measures it indirectly from other parameters (e. g. after
+ ``FE_HAS_VITERBI``, see :c:type:`fe_status`).
+
+ Having it available after inner FEC is more common.
+
+Bit counts post-FEC (:ref:`DTV-STAT-POST-ERROR-BIT-COUNT` and :ref:`DTV-STAT-POST-TOTAL-BIT-COUNT`)
+ - Those counters measure the number of bits and bit errors errors after
+ the forward error correction (FEC) on the inner coding block
+ (after Viterbi, LDPC or other inner code).
+
+ - Due to its nature, those statistics depend on full coding lock
+ (e. g. after ``FE_HAS_SYNC`` or after ``FE_HAS_LOCK``,
+ see :c:type:`fe_status`).
+
+Bit counts pre-FEC (:ref:`DTV-STAT-PRE-ERROR-BIT-COUNT` and :ref:`DTV-STAT-PRE-TOTAL-BIT-COUNT`)
+ - Those counters measure the number of bits and bit errors errors before
+ the forward error correction (FEC) on the inner coding block
+ (before Viterbi, LDPC or other inner code).
+
+ - Not all frontends provide this kind of statistics.
+
+ - Due to its nature, those statistics depend on inner coding lock (e. g.
+ after ``FE_HAS_VITERBI``, see :c:type:`fe_status`).
+
+Block counts (:ref:`DTV-STAT-ERROR-BLOCK-COUNT` and :ref:`DTV-STAT-TOTAL-BLOCK-COUNT`)
+ - Those counters measure the number of blocks and block errors errors after
+ the forward error correction (FEC) on the inner coding block
+ (before Viterbi, LDPC or other inner code).
+
+ - Due to its nature, those statistics depend on full coding lock
+ (e. g. after ``FE_HAS_SYNC`` or after
+ ``FE_HAS_LOCK``, see :c:type:`fe_status`).
+
+.. note:: All counters should be monotonically increased as they're
+ collected from the hardware.
+
+A typical example of the logic that handle status and statistics is::
+
+ static int foo_get_status_and_stats(struct dvb_frontend *fe)
+ {
+ struct foo_state *state = fe->demodulator_priv;
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+
+ int rc;
+ enum fe_status *status;
+
+ /* Both status and strength are always available */
+ rc = foo_read_status(fe, &status);
+ if (rc < 0)
+ return rc;
+
+ rc = foo_read_strength(fe);
+ if (rc < 0)
+ return rc;
+
+ /* Check if CNR is available */
+ if (!(fe->status & FE_HAS_CARRIER))
+ return 0;
+
+ rc = foo_read_cnr(fe);
+ if (rc < 0)
+ return rc;
+
+ /* Check if pre-BER stats are available */
+ if (!(fe->status & FE_HAS_VITERBI))
+ return 0;
+
+ rc = foo_get_pre_ber(fe);
+ if (rc < 0)
+ return rc;
+
+ /* Check if post-BER stats are available */
+ if (!(fe->status & FE_HAS_SYNC))
+ return 0;
+
+ rc = foo_get_post_ber(fe);
+ if (rc < 0)
+ return rc;
+ }
+
+ static const struct dvb_frontend_ops ops = {
+ /* ... */
+ .read_status = foo_get_status_and_stats,
+ };
+
+Statistics collect
+^^^^^^^^^^^^^^^^^^
+
+On almost all frontend hardware, the bit and byte counts are stored by
+the hardware after a certain amount of time or after the total bit/block
+counter reaches a certain value (usually programable), for example, on
+every 1000 ms or after receiving 1,000,000 bits.
+
+So, if you read the registers too soon, you'll end by reading the same
+value as in the previous reading, causing the monotonic value to be
+incremented too often.
+
+Drivers should take the responsibility to avoid too often reads. That
+can be done using two approaches:
+
+if the driver have a bit that indicates when a collected data is ready
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+Driver should check such bit before making the statistics available.
+
+An example of such behavior can be found at this code snippet (adapted
+from mb86a20s driver's logic)::
+
+ static int foo_get_pre_ber(struct dvb_frontend *fe)
+ {
+ struct foo_state *state = fe->demodulator_priv;
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+ int rc, bit_error;
+
+ /* Check if the BER measures are already available */
+ rc = foo_read_u8(state, 0x54);
+ if (rc < 0)
+ return rc;
+
+ if (!rc)
+ return 0;
+
+ /* Read Bit Error Count */
+ bit_error = foo_read_u32(state, 0x55);
+ if (bit_error < 0)
+ return bit_error;
+
+ /* Read Total Bit Count */
+ rc = foo_read_u32(state, 0x51);
+ if (rc < 0)
+ return rc;
+
+ c->pre_bit_error.stat[0].scale = FE_SCALE_COUNTER;
+ c->pre_bit_error.stat[0].uvalue += bit_error;
+ c->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER;
+ c->pre_bit_count.stat[0].uvalue += rc;
+
+ return 0;
+ }
+
+If the driver doesn't provide a statistics available check bit
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+A few devices, however, may not provide a way to check if the stats are
+available (or the way to check it is unknown). They may not even provide
+a way to directly read the total number of bits or blocks.
+
+On those devices, the driver need to ensure that it won't be reading from
+the register too often and/or estimate the total number of bits/blocks.
+
+On such drivers, a typical routine to get statistics would be like
+(adapted from dib8000 driver's logic)::
+
+ struct foo_state {
+ /* ... */
+
+ unsigned long per_jiffies_stats;
+ }
+
+ static int foo_get_pre_ber(struct dvb_frontend *fe)
+ {
+ struct foo_state *state = fe->demodulator_priv;
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+ int rc, bit_error;
+ u64 bits;
+
+ /* Check if time for stats was elapsed */
+ if (!time_after(jiffies, state->per_jiffies_stats))
+ return 0;
+
+ /* Next stat should be collected in 1000 ms */
+ state->per_jiffies_stats = jiffies + msecs_to_jiffies(1000);
+
+ /* Read Bit Error Count */
+ bit_error = foo_read_u32(state, 0x55);
+ if (bit_error < 0)
+ return bit_error;
+
+ /*
+ * On this particular frontend, there's no register that
+ * would provide the number of bits per 1000ms sample. So,
+ * some function would calculate it based on DTV properties
+ */
+ bits = get_number_of_bits_per_1000ms(fe);
+
+ c->pre_bit_error.stat[0].scale = FE_SCALE_COUNTER;
+ c->pre_bit_error.stat[0].uvalue += bit_error;
+ c->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER;
+ c->pre_bit_count.stat[0].uvalue += bits;
+
+ return 0;
+ }
+
+Please notice that, on both cases, we're getting the statistics using the
+:c:type:`dvb_frontend_ops` ``.read_status`` callback. The rationale is that
+the frontend core will automatically call this function periodically
+(usually, 3 times per second, when the frontend is locked).
+
+That warrants that we won't miss to collect a counter and increment the
+monotonic stats at the right time.
+
+Digital TV Frontend functions and types
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
.. kernel-doc:: drivers/media/dvb-core/dvb_frontend.h
diff --git a/Documentation/media/typical_media_device.svg b/Documentation/media/typical_media_device.svg
index 0c8abd6..d6fad90 100644
--- a/Documentation/media/typical_media_device.svg
+++ b/Documentation/media/typical_media_device.svg
@@ -1,2948 +1,106 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<svg
- xmlns:dc="http://purl.org/dc/elements/1.1/"
- xmlns:cc="http://creativecommons.org/ns#"
- xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
- xmlns:svg="http://www.w3.org/2000/svg"
- xmlns="http://www.w3.org/2000/svg"
- xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
- xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
- clip-path="url(#a)"
- xml:space="preserve"
- height="179mm"
- viewBox="0 0 22648.239 17899.829"
- width="235mm"
- version="1.2"
- preserveAspectRatio="xMidYMid"
- id="svg2"
- inkscape:version="0.91 r13725"
- sodipodi:docname="typical_media_device.svg"
- style="fill-rule:evenodd;stroke-width:28.22200012;stroke-linejoin:round"><metadata
- id="metadata1533"><rdf:RDF><cc:Work
- rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
- rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title /></cc:Work></rdf:RDF></metadata><sodipodi:namedview
- pagecolor="#ffffff"
- bordercolor="#666666"
- borderopacity="1"
- objecttolerance="10"
- gridtolerance="10"
- guidetolerance="10"
- inkscape:pageopacity="0"
- inkscape:pageshadow="2"
- inkscape:window-width="1920"
- inkscape:window-height="997"
- id="namedview1531"
- showgrid="false"
- fit-margin-top="0"
- fit-margin-left="0"
- fit-margin-right="0"
- fit-margin-bottom="0"
- inkscape:zoom="1.2707744"
- inkscape:cx="410.32614"
- inkscape:cy="316.736"
- inkscape:window-x="1920"
- inkscape:window-y="30"
- inkscape:window-maximized="1"
- inkscape:current-layer="svg2" /><defs
- id="defs4"><clipPath
- id="a"
- clipPathUnits="userSpaceOnUse"><rect
- y="0"
- x="0"
- width="28000"
- height="21000"
- id="rect7" /></clipPath></defs><path
- style="fill:#ffccff"
- inkscape:connector-curvature="0"
- id="path11"
- d="m 10145.77,2636.013 c -518.0641,0 -1035.1241,515 -1035.1241,1031 l 0,4124 c 0,516 517.06,1032 1035.1241,1032 l 8572.152,0 c 518.064,0 1036.128,-516 1036.128,-1032 l 0,-4124 c 0,-516 -518.064,-1031 -1036.128,-1031 l -8572.152,0 z" /><path
- style="fill:#ffffcc"
- inkscape:connector-curvature="0"
- id="path15"
- d="m 1505.5459,13443.013 c -293,0 -585,292 -585,585 l 0,2340 c 0,293 292,586 585,586 l 3275,0 c 293,0 586,-293 586,-586 l 0,-2340 c 0,-293 -293,-585 -586,-585 l -3275,0 z" /><path
- style="fill:#e6e6e6"
- inkscape:connector-curvature="0"
- id="path19"
- d="m 517.1459,22.013 c -461,0 -922,461 -922,922 l 0,11169 c 0,461 461,923 922,923 l 3692,0 c 461,0 922,-462 922,-923 l 0,-11169 c 0,-461 -461,-922 -922,-922 l -3692,0 z" /><path
- style="fill:#ff8080"
- inkscape:connector-curvature="0"
- id="path23"
- d="m 2371.5459,6438.013 -2260,0 0,-1086 4520,0 0,1086 -2260,0 z" /><path
- style="fill:none;stroke:#3465af"
- inkscape:connector-curvature="0"
- id="path25"
- d="m 2371.5459,6438.013 -2260,0 0,-1086 4520,0 0,1086 -2260,0 z" /><text
- id="text27"
- class="TextShape"
- x="-2089.4541"
- y="-2163.9871"><tspan
- style="font-weight:400;font-size:635px;font-family:'Times New Roman', serif"
- id="tspan29"
- class="TextParagraph"
- font-weight="400"
- font-size="635px"><tspan
- id="tspan31"
- class="TextPosition"
- x="489.5459"
- y="6111.0132"><tspan
- style="fill:#000000"
- id="tspan33">Audio decoder</tspan></tspan></tspan></text>
-<path
- style="fill:#ff8080"
- inkscape:connector-curvature="0"
- id="path37"
- d="m 2371.5459,9608.013 -2260,0 0,-1270 4520,0 0,1270 -2260,0 z" /><path
- style="fill:none;stroke:#3465af"
- inkscape:connector-curvature="0"
- id="path39"
- d="m 2371.5459,9608.013 -2260,0 0,-1270 4520,0 0,1270 -2260,0 z" /><text
- id="text41"
- class="TextShape"
- x="-2089.4541"
- y="-2163.9871"><tspan
- style="font-weight:400;font-size:635px;font-family:'Times New Roman', serif"
- id="tspan43"
- class="TextParagraph"
- font-weight="400"
- font-size="635px"><tspan
- id="tspan45"
- class="TextPosition"
- x="527.5459"
- y="9189.0127"><tspan
- style="fill:#000000"
- id="tspan47">Video decoder</tspan></tspan></tspan></text>
-<path
- style="fill:#ff8080"
- inkscape:connector-curvature="0"
- id="path51"
- d="m 2363.5459,8053.013 -2269,0 0,-1224 4537,0 0,1224 -2268,0 z" /><path
- style="fill:none;stroke:#3465af"
- inkscape:connector-curvature="0"
- id="path53"
- d="m 2363.5459,8053.013 -2269,0 0,-1224 4537,0 0,1224 -2268,0 z" /><text
- id="text55"
- class="TextShape"
- x="-2089.4541"
- y="-2163.9871"><tspan
- style="font-weight:400;font-size:635px;font-family:'Times New Roman', serif"
- id="tspan57"
- class="TextParagraph"
- font-weight="400"
- font-size="635px"><tspan
- id="tspan59"
- class="TextPosition"
- x="481.5459"
- y="7657.0132"><tspan
- style="fill:#000000"
- id="tspan61">Audio encoder</tspan></tspan></tspan></text>
-<path
- style="fill:#ccffcc"
- inkscape:connector-curvature="0"
- id="path65"
- d="m 13621.546,10385.813 -3810.0001,0 0,-1281 7620.0001,0 0,1281 -3810,0 z" /><path
- style="fill:none;stroke:#3465af"
- inkscape:connector-curvature="0"
- id="path67"
- d="m 13621.546,10385.813 -3810.0001,0 0,-1281 7620.0001,0 0,1281 -3810,0 z" /><text
- id="text69"
- class="TextShape"
- x="-2089.4541"
- y="-2446.187"><tspan
- style="font-weight:400;font-size:635px;font-family:'Times New Roman', serif"
- id="tspan71"
- class="TextParagraph"
- font-weight="400"
- font-size="635px"><tspan
- id="tspan73"
- class="TextPosition"
- x="10287.546"
- y="9960.8135"><tspan
- style="fill:#000000"
- id="tspan75">Button Key/IR input logic</tspan></tspan></tspan></text>
-<path
- style="fill:#cfe7f5"
- inkscape:connector-curvature="0"
- id="path79"
- d="m 12079.546,12182.213 -2268.0001,0 0,-1412 4536.0001,0 0,1412 -2268,0 z" /><path
- style="fill:none;stroke:#3465af"
- inkscape:connector-curvature="0"
- id="path81"
- d="m 12079.546,12182.213 -2268.0001,0 0,-1412 4536.0001,0 0,1412 -2268,0 z" /><text
- id="text83"
- class="TextShape"
- x="-2089.4541"
- y="-2389.7871"><tspan
- style="font-weight:400;font-size:635px;font-family:'Times New Roman', serif"
- id="tspan85"
- class="TextParagraph"
- font-weight="400"
- font-size="635px"><tspan
- id="tspan87"
- class="TextPosition"
- x="10792.546"
- y="11692.213"><tspan
- style="fill:#000000"
- id="tspan89">EEPROM</tspan></tspan></tspan></text>
-<path
- style="fill:#ffcc99"
- inkscape:connector-curvature="0"
- id="path93"
- d="m 3050.5459,15498.013 -1563,0 0,-1715 3126,0 0,1715 -1563,0 z" /><path
- style="fill:none;stroke:#3465af"
- inkscape:connector-curvature="0"
- id="path95"
- d="m 3050.5459,15498.013 -1563,0 0,-1715 3126,0 0,1715 -1563,0 z" /><text
- id="text97"
- class="TextShape"
- x="-2089.4541"
- y="-2163.9871"><tspan
- style="font-weight:400;font-size:635px;font-family:'Times New Roman', serif"
- id="tspan99"
- class="TextParagraph"
- font-weight="400"
- font-size="635px"><tspan
- id="tspan101"
- class="TextPosition"
- x="2186.5459"
- y="14856.013"><tspan
- style="fill:#000000"
- id="tspan103">Sensor</tspan></tspan></tspan></text>
-<path
- style="fill:#729fcf"
- inkscape:connector-curvature="0"
- id="path107"
- d="m 4629.5459,5866.013 385,-353 0,176 1167,0 0,-176 386,353 -386,354 0,-177 -1167,0 0,177 -385,-354 z" /><path
- style="fill:none;stroke:#3465af"
- inkscape:connector-curvature="0"
- id="path109"
- d="m 4629.5459,5866.013 385,-353 0,176 1167,0 0,-176 386,353 -386,354 0,-177 -1167,0 0,177 -385,-354 z" /><path
- style="fill:#729fcf"
- inkscape:connector-curvature="0"
- id="path113"
- d="m 4629.5459,7448.013 385,-353 0,176 1167,0 0,-176 386,353 -386,354 0,-177 -1167,0 0,177 -385,-354 z" /><path
- style="fill:none;stroke:#3465af"
- inkscape:connector-curvature="0"
- id="path115"
- d="m 4629.5459,7448.013 385,-353 0,176 1167,0 0,-176 386,353 -386,354 0,-177 -1167,0 0,177 -385,-354 z" /><path
- style="fill:#729fcf"
- inkscape:connector-curvature="0"
- id="path119"
- d="m 4631.5459,8936.013 385,-353 0,176 1166,0 0,-176 386,353 -386,354 0,-177 -1166,0 0,177 -385,-354 z" /><path
- style="fill:none;stroke:#3465af"
- inkscape:connector-curvature="0"
- id="path121"
- d="m 4631.5459,8936.013 385,-353 0,176 1166,0 0,-176 386,353 -386,354 0,-177 -1166,0 0,177 -385,-354 z" /><path
- style="fill:#729fcf"
- inkscape:connector-curvature="0"
- id="path125"
- d="m 7872.5459,11464.213 385,-353 0,176 1166,0 0,-176 386,353 -386,354 0,-177 -1166,0 0,177 -385,-354 z" /><path
- style="fill:none;stroke:#3465af"
- inkscape:connector-curvature="0"
- id="path127"
- d="m 7872.5459,11464.213 385,-353 0,176 1166,0 0,-176 386,353 -386,354 0,-177 -1166,0 0,177 -385,-354 z" /><path
- style="fill:#729fcf"
- inkscape:connector-curvature="0"
- id="path131"
- d="m 7872.5459,9716.813 385,-353 0,176 1166,0 0,-176 386,353 -386,354 0,-177 -1166,0 0,177 -385,-354 z" /><path
- style="fill:none;stroke:#3465af"
- inkscape:connector-curvature="0"
- id="path133"
- d="m 7872.5459,9716.813 385,-353 0,176 1166,0 0,-176 386,353 -386,354 0,-177 -1166,0 0,177 -385,-354 z" /><path
- style="fill:#729fcf"
- inkscape:connector-curvature="0"
- id="path137"
- d="m 7872.5459,14994.013 670,-353 0,176 2028.0001,0 0,-176 671,353 -671,354 0,-177 -2028.0001,0 0,177 -670,-354 z" /><path
- style="fill:none;stroke:#3465af"
- inkscape:connector-curvature="0"
- id="path139"
- d="m 7872.5459,14994.013 670,-353 0,176 2028.0001,0 0,-176 671,353 -671,354 0,-177 -2028.0001,0 0,177 -670,-354 z" /><path
- style="fill:#729fcf"
- inkscape:connector-curvature="0"
- id="path143"
- d="m 17534.058,14104.529 978.488,840.891 -978.488,840.89 0,-420.862 -2960.48,0 0,420.862 -979.489,-840.89 979.489,-840.891 0,420.029 2960.48,0 0,-420.029 z" /><path
- style="fill:none;stroke:#3465af;stroke-width:25.77035904"
- inkscape:connector-curvature="0"
- id="path145"
- d="m 17534.058,14104.529 978.488,840.891 -978.488,840.89 0,-420.862 -2960.48,0 0,420.862 -979.489,-840.89 979.489,-840.891 0,420.029 2960.48,0 0,-420.029 z" /><text
- id="text149"
- class="TextShape"
- x="-9922.1533"
- y="-644.58704"><tspan
- style="font-weight:400;font-size:706px;font-family:'Times New Roman', serif"
- id="tspan151"
- class="TextParagraph"
- font-weight="400"
- font-size="706px"><tspan
- id="tspan153"
- transform="matrix(0,-1,1,0,8509,40173)"
- class="TextPosition"
- x="14418.847"
- y="15187.413"><tspan
- style="fill:#000000"
- id="tspan155">System Bus</tspan></tspan></tspan></text>
-<path
- style="fill:#ccffff"
- inkscape:connector-curvature="0"
- id="path159"
- d="m 11061.546,7098.013 -1250.0001,0 0,-875 2499.0001,0 0,875 -1249,0 z" /><path
- style="fill:none;stroke:#3465af"
- inkscape:connector-curvature="0"
- id="path161"
- d="m 11061.546,7098.013 -1250.0001,0 0,-875 2499.0001,0 0,875 -1249,0 z" /><text
- id="text163"
- class="TextShape"
- x="-2089.4541"
- y="-2163.9871"><tspan
- style="font-weight:400;font-size:635px;font-family:'Times New Roman', serif"
- id="tspan165"
- class="TextParagraph"
- font-weight="400"
- font-size="635px"><tspan
- id="tspan167"
- class="TextPosition"
- x="10125.546"
- y="6876.0132"><tspan
- style="fill:#000000"
- id="tspan169">Demux</tspan></tspan></tspan></text>
-<path
- style="fill:#729fcf"
- inkscape:connector-curvature="0"
- id="path173"
- d="m 7906.5459,6601.013 373,-357 0,178 1130,0 0,-178 374,357 -374,358 0,-179 -1130,0 0,179 -373,-358 z" /><path
- style="fill:none;stroke:#3465af"
- inkscape:connector-curvature="0"
- id="path175"
- d="m 7906.5459,6601.013 373,-357 0,178 1130,0 0,-178 374,357 -374,358 0,-179 -1130,0 0,179 -373,-358 z" /><path
- style="fill:#729fcf"
- inkscape:connector-curvature="0"
- id="path179"
- d="m 7906.5459,5214.013 373,-358 0,179 1130,0 0,-179 374,358 -374,358 0,-179 -1130,0 0,179 -373,-358 z" /><path
- style="fill:none;stroke:#3465af"
- inkscape:connector-curvature="0"
- id="path181"
- d="m 7906.5459,5214.013 373,-358 0,179 1130,0 0,-179 374,358 -374,358 0,-179 -1130,0 0,179 -373,-358 z" /><path
- style="fill:#ccffff"
- inkscape:connector-curvature="0"
- id="path185"
- d="m 14232.546,5828.013 -4421.0001,0 0,-1270 8841.0001,0 0,1270 -4420,0 z" /><path
- style="fill:none;stroke:#3465af"
- inkscape:connector-curvature="0"
- id="path187"
- d="m 14232.546,5828.013 -4421.0001,0 0,-1270 8841.0001,0 0,1270 -4420,0 z" /><text
- id="text189"
- class="TextShape"
- x="-2089.4541"
- y="-2163.9871"><tspan
- style="font-weight:400;font-size:635px;font-family:'Times New Roman', serif"
- id="tspan191"
- class="TextParagraph"
- font-weight="400"
- font-size="635px"><tspan
- id="tspan193"
- class="TextPosition"
- x="10696.546"
- y="5409.0132"><tspan
- style="fill:#000000"
- id="tspan195">Conditional Access Module</tspan></tspan></tspan></text>
-<path
- style="fill:#ff8080"
- inkscape:connector-curvature="0"
- id="path199"
- d="m 2355.5459,11123.013 -2269,0 0,-1224 4537,0 0,1224 -2268,0 z" /><path
- style="fill:none;stroke:#3465af"
- inkscape:connector-curvature="0"
- id="path201"
- d="m 2355.5459,11123.013 -2269,0 0,-1224 4537,0 0,1224 -2268,0 z" /><text
- id="text203"
- class="TextShape"
- x="-2089.4541"
- y="-2163.9871"><tspan
- style="font-weight:400;font-size:635px;font-family:'Times New Roman', serif"
- id="tspan205"
- class="TextParagraph"
- font-weight="400"
- font-size="635px"><tspan
- id="tspan207"
- class="TextPosition"
- x="511.5459"
- y="10727.013"><tspan
- style="fill:#000000"
- id="tspan209">Video encoder</tspan></tspan></tspan></text>
-<path
- style="fill:#729fcf"
- inkscape:connector-curvature="0"
- id="path213"
- d="m 4631.5459,10470.013 385,-353 0,176 1166,0 0,-176 386,353 -386,354 0,-177 -1166,0 0,177 -385,-354 z" /><path
- style="fill:none;stroke:#3465af"
- inkscape:connector-curvature="0"
- id="path215"
- d="m 4631.5459,10470.013 385,-353 0,176 1166,0 0,-176 386,353 -386,354 0,-177 -1166,0 0,177 -385,-354 z" /><path
- style="fill:#729fcf"
- inkscape:connector-curvature="0"
- id="path219"
- d="m 18701.546,5381.013 385,-353 0,176 1166,0 0,-176 386,353 -386,354 0,-177 -1166,0 0,177 -385,-354 z" /><path
- style="fill:none;stroke:#3465af"
- inkscape:connector-curvature="0"
- id="path221"
- d="m 18701.546,5381.013 385,-353 0,176 1166,0 0,-176 386,353 -386,354 0,-177 -1166,0 0,177 -385,-354 z" /><text
- id="text225"
- class="TextShape"
- x="-1976.5541"
- y="-2163.9871"><tspan
- style="font-weight:400;font-size:635px;font-family:'Times New Roman', serif"
- id="tspan227"
- class="TextParagraph"
- font-weight="400"
- font-size="635px"><tspan
- id="tspan229"
- class="TextPosition"
- x="13.4459"
- y="12314.013"><tspan
- style="fill:#000000"
- id="tspan231">Radio / Analog TV</tspan></tspan></tspan></text>
-<text
- id="text235"
- class="TextShape"
- x="-2089.4541"
- y="-2163.9871"><tspan
- style="font-weight:700;font-size:635px;font-family:'Times New Roman', serif"
- id="tspan237"
- class="TextParagraph"
- font-weight="700"
- font-size="635px"><tspan
- id="tspan239"
- class="TextPosition"
- x="12866.546"
- y="8560.0127"><tspan
- style="fill:#000000"
- id="tspan241">Digital TV</tspan></tspan></tspan></text>
-<text
- id="text245"
- class="TextShape"
- x="-8919.0537"
- y="-1373.787"><tspan
- style="font-weight:400;font-size:494px;font-family:'Times New Roman', serif"
- id="tspan247"
- class="TextParagraph"
- font-weight="400"
- font-size="494px"><tspan
- id="tspan249"
- class="TextPosition"
- x="5804.9458"
- y="17793.213"><tspan
- style="fill:#000000"
- id="tspan251">PS.: picture is not complete: other blocks may be present</tspan></tspan></tspan></text>
-<text
- id="text255"
- class="TextShape"
- x="-2089.4541"
- y="-2163.9871"><tspan
- style="font-weight:400;font-size:635px;font-family:'Times New Roman', serif"
- id="tspan257"
- class="TextParagraph"
- font-weight="400"
- font-size="635px"><tspan
- id="tspan259"
- class="TextPosition"
- x="2109.5459"
- y="16397.014"><tspan
- style="fill:#000000"
- id="tspan261">Webcam</tspan></tspan></tspan></text>
-<path
- style="fill:#ff9900"
- inkscape:connector-curvature="0"
- id="path265"
- d="m 12462.546,13925.813 -2650.0001,0 0,-1412 5299.0001,0 0,1412 -2649,0 z" /><path
- style="fill:none;stroke:#3465af"
- inkscape:connector-curvature="0"
- id="path267"
- d="m 12462.546,13925.813 -2650.0001,0 0,-1412 5299.0001,0 0,1412 -2649,0 z" /><text
- id="text269"
- class="TextShape"
- x="-2089.4541"
- y="-2446.187"><tspan
- style="font-weight:400;font-size:635px;font-family:'Times New Roman', serif"
- id="tspan271"
- class="TextParagraph"
- font-weight="400"
- font-size="635px"><tspan
- id="tspan273"
- class="TextPosition"
- x="10175.546"
- y="13435.813"><tspan
- style="fill:#000000"
- id="tspan275">Processing blocks</tspan></tspan></tspan></text>
-<path
- style="fill:#729fcf"
- inkscape:connector-curvature="0"
- id="path279"
- d="m 7872.5459,13207.813 385,-353 0,176 1166,0 0,-176 386,353 -386,354 0,-177 -1166,0 0,177 -385,-354 z" /><path
- style="fill:none;stroke:#3465af"
- inkscape:connector-curvature="0"
- id="path281"
- d="m 7872.5459,13207.813 385,-353 0,176 1166,0 0,-176 386,353 -386,354 0,-177 -1166,0 0,177 -385,-354 z" /><path
- style="fill:#729fcf"
- inkscape:connector-curvature="0"
- id="path285"
- d="m 4612.5459,14790.013 397,-353 0,176 1201,0 0,-176 398,353 -398,354 0,-177 -1201,0 0,177 -397,-354 z" /><path
- style="fill:none;stroke:#3465af"
- inkscape:connector-curvature="0"
- id="path287"
- d="m 4612.5459,14790.013 397,-353 0,176 1201,0 0,-176 398,353 -398,354 0,-177 -1201,0 0,177 -397,-354 z" /><text
- id="text291"
- class="TextShape"
- x="-2428.0542"
- y="-2163.9871"><tspan
- style="font-weight:400;font-size:635px;font-family:'Times New Roman', serif"
- id="tspan293"
- class="TextParagraph"
- font-weight="400"
- font-size="635px"><tspan
- id="tspan295"
- class="TextPosition"
- x="20421.945"
- y="6628.0132"><tspan
- style="fill:#000000"
- id="tspan297">Smartcard</tspan></tspan></tspan></text>
-<path
- style="fill:#ffccff"
- inkscape:connector-curvature="0"
- id="path301"
- d="m 623.3227,436.013 c -334.5984,0 -669.1968,333 -669.1968,666 l 0,2668 c 0,333 334.5984,666 669.1968,666 l 18456.1663,0 c 334.598,0 670.202,-333 670.202,-666 l 0,-2668 c 0,-333 -335.604,-666 -670.202,-666 l -18456.1663,0 z" /><path
- style="fill:#ff8080"
- inkscape:connector-curvature="0"
- id="path305"
- d="m 3031.5459,2991.013 -1614,0 0,-1816 3227,0 0,1816 -1613,0 z" /><path
- style="fill:none;stroke:#3465af"
- inkscape:connector-curvature="0"
- id="path307"
- d="m 3031.5459,2991.013 -1614,0 0,-1816 3227,0 0,1816 -1613,0 z" /><text
- style="font-weight:400;font-size:635px;font-family:'Times New Roman', serif"
- id="text309"
- class="TextShape"
- font-weight="400"
- font-size="635px"
- x="-2089.4541"
- y="-2163.9871"><tspan
- id="tspan311"
- class="TextParagraph"><tspan
- id="tspan313"
- class="TextPosition"
- x="2284.5459"
- y="1947.0129"><tspan
- style="fill:#000000"
- id="tspan315">Tuner</tspan></tspan></tspan><tspan
- id="tspan317"
- class="TextParagraph"><tspan
- id="tspan319"
- class="TextPosition"
- x="2061.5459"
- y="2650.0129"><tspan
- style="fill:#000000"
- id="tspan321">FM/TV</tspan></tspan></tspan></text>
-<path
- style="fill:#ff8080"
- inkscape:connector-curvature="0"
- id="path325"
- d="m 812.5459,1538.013 c 0,111 40,202 88,202 l 530,0 c 48,0 89,-91 89,-202 0,-110 -41,-202 -89,-202 l -530,0 c -48,0 -88,92 -88,202 z" /><path
- style="fill:none;stroke:#3465af"
- inkscape:connector-curvature="0"
- id="path327"
- d="m 812.5459,1538.013 c 0,111 40,202 88,202 l 530,0 c 48,0 89,-91 89,-202 0,-110 -41,-202 -89,-202 l -530,0 c -48,0 -88,92 -88,202 z" /><path
- style="fill:#ffb3b3"
- inkscape:connector-curvature="0"
- id="path329"
- d="m 812.5459,1538.013 c 0,111 40,202 88,202 48,0 88,-91 88,-202 0,-110 -40,-202 -88,-202 -48,0 -88,92 -88,202 z" /><path
- style="fill:none;stroke:#3465af"
- inkscape:connector-curvature="0"
- id="path331"
- d="m 812.5459,1538.013 c 0,111 40,202 88,202 48,0 88,-91 88,-202 0,-110 -40,-202 -88,-202 -48,0 -88,92 -88,202 z" /><path
- style="fill:#ff8080"
- inkscape:connector-curvature="0"
- id="path335"
- d="m 813.5459,2103.013 c 0,110 40,202 88,202 l 530,0 c 48,0 89,-92 89,-202 0,-110 -41,-203 -89,-203 l -530,0 c -48,0 -88,93 -88,203 z" /><path
- style="fill:none;stroke:#3465af"
- inkscape:connector-curvature="0"
- id="path337"
- d="m 813.5459,2103.013 c 0,110 40,202 88,202 l 530,0 c 48,0 89,-92 89,-202 0,-110 -41,-203 -89,-203 l -530,0 c -48,0 -88,93 -88,203 z" /><path
- style="fill:#ffb3b3"
- inkscape:connector-curvature="0"
- id="path339"
- d="m 813.5459,2103.013 c 0,110 40,202 88,202 48,0 88,-92 88,-202 0,-110 -40,-203 -88,-203 -48,0 -88,93 -88,203 z" /><path
- style="fill:none;stroke:#3465af"
- inkscape:connector-curvature="0"
- id="path341"
- d="m 813.5459,2103.013 c 0,110 40,202 88,202 48,0 88,-92 88,-202 0,-110 -40,-203 -88,-203 -48,0 -88,93 -88,203 z" /><path
- style="fill:#729fcf"
- inkscape:connector-curvature="0"
- id="path345"
- d="m 4629.5459,2032.013 385,-353 0,176 1167,0 0,-176 386,353 -386,354 0,-177 -1167,0 0,177 -385,-354 z" /><path
- style="fill:none;stroke:#3465af"
- inkscape:connector-curvature="0"
- id="path347"
- d="m 4629.5459,2032.013 385,-353 0,176 1167,0 0,-176 386,353 -386,354 0,-177 -1167,0 0,177 -385,-354 z" /><path
- style="fill:#729fcf"
- inkscape:connector-curvature="0"
- id="path351"
- d="m 7889.5459,1986.013 402,-368 0,184 1217,0 0,-184 403,368 -403,369 0,-185 -1217,0 0,185 -402,-369 z" /><path
- style="fill:none;stroke:#3465af"
- inkscape:connector-curvature="0"
- id="path353"
- d="m 7889.5459,1986.013 402,-368 0,184 1217,0 0,-184 403,368 -403,369 0,-185 -1217,0 0,185 -402,-369 z" /><path
- style="fill:#ccffff"
- inkscape:connector-curvature="0"
- id="path357"
- d="m 14410.546,4025.013 -4500.0001,0 0,-1389 9000.0001,0 0,1389 -4500,0 z" /><path
- style="fill:none;stroke:#3465af"
- inkscape:connector-curvature="0"
- id="path359"
- d="m 14410.546,4025.013 -4500.0001,0 0,-1389 9000.0001,0 0,1389 -4500,0 z" /><text
- id="text361"
- class="TextShape"
- x="-2089.4541"
- y="-2163.9871"><tspan
- style="font-weight:400;font-size:635px;font-family:'Times New Roman', serif"
- id="tspan363"
- class="TextParagraph"
- font-weight="400"
- font-size="635px"><tspan
- id="tspan365"
- class="TextPosition"
- x="9961.5459"
- y="3546.0129"><tspan
- style="fill:#000000"
- id="tspan367">Satellite Equipment Control (SEC)</tspan></tspan></tspan></text>
-<path
- style="fill:#ccffff"
- inkscape:connector-curvature="0"
- id="path371"
- d="m 11310.546,2436.013 -1400.0001,0 0,-1000 2800.0001,0 0,1000 -1400,0 z" /><path
- style="fill:none;stroke:#3465af"
- inkscape:connector-curvature="0"
- id="path373"
- d="m 11310.546,2436.013 -1400.0001,0 0,-1000 2800.0001,0 0,1000 -1400,0 z" /><text
- id="text375"
- class="TextShape"
- x="-2089.4541"
- y="-2163.9871"><tspan
- style="font-weight:400;font-size:635px;font-family:'Times New Roman', serif"
- id="tspan377"
- class="TextParagraph"
- font-weight="400"
- font-size="635px"><tspan
- id="tspan379"
- class="TextPosition"
- x="10375.546"
- y="2152.0129"><tspan
- style="fill:#000000"
- id="tspan381">Demod</tspan></tspan></tspan></text>
-<path
- style="fill:#729fcf"
- inkscape:connector-curvature="0"
- id="path385"
- d="m 7889.5459,3287.013 402,-368 0,184 1217,0 0,-184 403,368 -403,369 0,-185 -1217,0 0,185 -402,-369 z" /><path
- style="fill:none;stroke:#3465af"
- inkscape:connector-curvature="0"
- id="path387"
- d="m 7889.5459,3287.013 402,-368 0,184 1217,0 0,-184 403,368 -403,369 0,-185 -1217,0 0,185 -402,-369 z" /><path
- d="m 7906.5459,9121.013 0,7302 -1270,0 0,-14605 1270,0 0,7303 z"
- id="path389"
- inkscape:connector-curvature="0"
- style="fill:#ffff99" /><path
- d="m 7906.5459,9121.013 0,7302 -1270,0 0,-14605 1270,0 0,7303 z"
- id="path391"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465af" /><text
- y="-6589.021"
- x="-20792.584"
- transform="matrix(0,-1,1,0,0,0)"
- class="TextShape"
- id="text393"><tspan
- font-size="635px"
- font-weight="400"
- class="TextParagraph"
- id="tspan395"
- style="font-weight:400;font-size:635px;font-family:'Times New Roman', serif"><tspan
- y="7460.9849"
- x="-11215.646"
- class="TextPosition"
- transform="matrix(0,-1,1,0,-4473,23627)"
- id="tspan397"><tspan
- id="tspan399"
- style="fill:#000000">I2C Bus (control bus)</tspan></tspan></tspan></text>
-<text
- id="text403"
- class="TextShape"
- x="-2145.854"
- y="-2163.9871"><tspan
- style="font-weight:400;font-size:635px;font-family:'Times New Roman', serif"
- id="tspan405"
- class="TextParagraph"
- font-weight="400"
- font-size="635px"><tspan
- id="tspan407"
- class="TextPosition"
- x="7245.146"
- y="1114.0129"><tspan
- style="fill:#000000"
- id="tspan409">Digital TV Frontend</tspan></tspan></tspan></text>
-<path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 863.1459,636.145 c -18.27,0 -35.525,0.99994 -53.795,2.99982"
- id="path415"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 776.8709,644.14452 c -17.255,2.99982 -35.525,6.99958 -52.78,11.99928"
- id="path417"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 692.6259,666.1432 c -16.24,5.99964 -33.495,11.99928 -49.735,19.9988"
- id="path419"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 613.4559,700.14116 c -15.225,7.99952 -31.465,16.99898 -46.69,26.99838"
- id="path421"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 539.3609,745.13846 c -14.21,9.9994 -28.42,20.99874 -42.63,31.99808"
- id="path423"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 471.3559,798.13528 c -13.195,11.99928 -26.39,23.99856 -38.57,36.99778"
- id="path425"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 410.4559,859.13162 c -11.165,12.99922 -22.33,26.99838 -33.495,40.99754"
- id="path427"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 357.6759,927.12754 c -10.15,13.99916 -19.285,28.99826 -28.42,44.9973"
- id="path429"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 314.0309,1000.1232 c -8.12,15.999 -15.225,31.998 -22.33,48.997"
- id="path431"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 280.5359,1079.1184 c -5.075,16.999 -10.15,33.998 -14.21,50.997"
- id="path433"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 260.2359,1162.1134 c -3.045,17.999 -5.075,34.9979 -6.09,52.9969"
- id="path435"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 254.1459,1247.1083 0,52.9969"
- id="path437"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 254.1459,1333.1032 0,52.9968"
- id="path439"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 254.1459,1418.0981 0,52.9968"
- id="path441"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 254.1459,1504.0929 0,52.9968"
- id="path443"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 254.1459,1589.0878 0,52.9968"
- id="path445"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 254.1459,1675.0827 0,52.9968"
- id="path447"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 254.1459,1760.0776 0,52.9968"
- id="path449"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 254.1459,1845.0725 0,53.9967"
- id="path451"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 254.1459,1931.0673 0,52.9968"
- id="path453"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 254.1459,2016.0622 0,52.9968"
- id="path455"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 254.1459,2102.057 0,52.9969"
- id="path457"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 254.1459,2187.0519 0,52.9969"
- id="path459"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 254.1459,2273.0468 0,52.9968"
- id="path461"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 254.1459,2358.0417 0,52.9968"
- id="path463"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 254.1459,2443.0366 0,53.9967"
- id="path465"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 254.1459,2529.0314 0,52.9968"
- id="path467"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 254.1459,2614.0263 0,52.9968"
- id="path469"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 254.1459,2700.0212 0,52.9968"
- id="path471"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 254.1459,2785.0161 0,52.9968"
- id="path473"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 254.1459,2871.0109 0,52.9968"
- id="path475"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 254.1459,2956.0058 0,52.9968"
- id="path477"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 254.1459,3041.0007 0,53.9968"
- id="path479"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 254.1459,3126.9955 0,52.9969"
- id="path481"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 254.1459,3211.9904 0,52.9969"
- id="path483"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 254.1459,3297.9853 0,52.9968"
- id="path485"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 254.1459,3382.9802 0,52.9968"
- id="path487"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 254.1459,3468.975 0,52.9968"
- id="path489"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 254.1459,3553.9699 0,52.9968"
- id="path491"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 254.1459,3638.9648 c 0,17.9989 1.015,35.9979 3.045,52.9968"
- id="path493"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 262.2659,3723.9597 c 4.06,17.9989 8.12,34.9979 13.195,51.9969"
- id="path495"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 285.6109,3806.9547 c 6.09,15.9991 13.195,32.9981 20.3,48.9971"
- id="path497"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 321.1359,3884.9501 c 8.12,14.9991 17.255,30.9981 27.405,45.9972"
- id="path499"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 366.8109,3957.9457 c 10.15,13.9991 21.315,27.9983 32.48,41.9975"
- id="path501"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 420.6059,4023.9417 c 12.18,12.9992 25.375,25.9985 38.57,37.9977"
- id="path503"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 483.5359,4083.9381 c 13.195,10.9994 27.405,22.9986 41.615,32.998"
- id="path505"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 552.5559,4135.935 c 14.21,9.9994 29.435,18.9989 45.675,26.9984"
- id="path507"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 627.6659,4178.9324 c 15.225,6.9996 32.48,14.9991 48.72,20.9988"
- id="path509"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 707.8509,4210.9305 c 17.255,4.9997 34.51,9.9994 51.765,13.9992"
- id="path511"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 792.0959,4230.9293 c 17.255,1.9999 35.525,3.9998 53.795,4.9997"
- id="path513"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 878.3709,4235.929 53.795,0"
- id="path515"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 964.6459,4235.929 53.795,0"
- id="path517"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 1051.9359,4235.929 53.795,0"
- id="path519"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 1138.2109,4235.929 53.795,0"
- id="path521"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 1225.5009,4235.929 53.795,0"
- id="path523"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 1311.7759,4235.929 53.795,0"
- id="path525"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 1398.0509,4235.929 54.81,0"
- id="path527"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 1485.3409,4235.929 53.795,0"
- id="path529"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 1571.6159,4235.929 53.795,0"
- id="path531"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 1658.9059,4235.929 53.795,0"
- id="path533"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 1745.1809,4235.929 53.795,0"
- id="path535"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 1832.4709,4235.929 53.795,0"
- id="path537"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 1918.7459,4235.929 53.795,0"
- id="path539"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 2005.0209,4235.929 54.81,0"
- id="path541"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 2092.3109,4235.929 53.795,0"
- id="path543"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 2178.5859,4235.929 53.795,0"
- id="path545"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 2265.8759,4235.929 53.795,0"
- id="path547"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 2352.1509,4235.929 53.795,0"
- id="path549"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 2439.4409,4235.929 53.795,0"
- id="path551"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 2525.7159,4235.929 53.795,0"
- id="path553"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 2611.9909,4235.929 54.81,0"
- id="path555"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 2699.2809,4235.929 53.795,0"
- id="path557"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 2785.5559,4235.929 53.795,0"
- id="path559"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 2872.8459,4235.929 53.795,0"
- id="path561"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 2959.1209,4235.929 53.795,0"
- id="path563"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 3046.4109,4235.929 53.795,0"
- id="path565"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 3132.6859,4235.929 53.795,0"
- id="path567"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 3219.9759,4235.929 53.795,0"
- id="path569"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 3306.2509,4235.929 53.795,0"
- id="path571"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 3392.5259,4235.929 53.795,0"
- id="path573"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 3479.8159,4235.929 53.795,0"
- id="path575"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 3566.0909,4235.929 53.795,0"
- id="path577"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 3653.3809,4235.929 53.795,0"
- id="path579"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 3739.6559,4235.929 53.795,0"
- id="path581"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 3826.9459,4235.929 53.795,0"
- id="path583"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 3913.2209,4235.929 53.795,0"
- id="path585"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 3999.4959,4235.929 53.795,0"
- id="path587"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 4086.7859,4235.929 53.795,0"
- id="path589"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 4173.0609,4235.929 53.795,0"
- id="path591"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 4260.3509,4235.929 53.795,0"
- id="path593"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 4346.6259,4235.929 53.795,0"
- id="path595"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 4433.9159,4235.929 53.795,0"
- id="path597"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 4520.1909,4235.929 53.795,0"
- id="path599"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 4606.4659,4235.929 54.81,0"
- id="path601"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 4693.7559,4235.929 53.795,0"
- id="path603"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 4780.0309,4235.929 53.795,0"
- id="path605"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 4867.3209,4235.929 53.795,0"
- id="path607"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 4953.5959,4235.929 53.795,0"
- id="path609"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 5040.8859,4235.929 53.795,0"
- id="path611"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 5127.1609,4235.929 53.795,0"
- id="path613"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 5213.4359,4235.929 54.81,0"
- id="path615"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 5300.7259,4235.929 53.795,0"
- id="path617"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 5387.0009,4235.929 53.795,0"
- id="path619"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 5474.2909,4235.929 53.795,0"
- id="path621"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 5560.5659,4235.929 53.795,0"
- id="path623"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 5647.8559,4235.929 53.795,0"
- id="path625"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 5734.1309,4235.929 53.795,0"
- id="path627"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 5820.4059,4235.929 54.81,0"
- id="path629"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 5907.6959,4235.929 53.795,0"
- id="path631"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 5993.9709,4235.929 53.795,0"
- id="path633"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 6081.2609,4235.929 53.795,0"
- id="path635"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 6167.5359,4235.929 53.795,0"
- id="path637"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 6254.8259,4235.929 53.795,0"
- id="path639"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 6341.1009,4235.929 53.795,0"
- id="path641"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 6427.3759,4235.929 54.81,0"
- id="path643"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 6514.6659,4235.929 53.795,0"
- id="path645"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 6600.9409,4235.929 53.795,0"
- id="path647"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 6688.2309,4235.929 53.795,0"
- id="path649"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 6774.5059,4235.929 53.795,0"
- id="path651"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 6861.7959,4235.929 53.795,0"
- id="path653"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 6948.0709,4235.929 53.795,0"
- id="path655"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 7035.3609,4235.929 53.795,0"
- id="path657"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 7121.6359,4235.929 53.795,0"
- id="path659"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 7207.9109,4235.929 53.795,0"
- id="path661"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 7295.2009,4235.929 53.795,0"
- id="path663"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 7381.4759,4235.929 53.795,0"
- id="path665"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 7468.7659,4235.929 53.795,0"
- id="path667"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 7555.0409,4235.929 53.795,0"
- id="path669"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 7642.3309,4235.929 53.795,0"
- id="path671"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 7728.6059,4235.929 53.795,0"
- id="path673"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 7814.8809,4235.929 53.795,0"
- id="path675"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 7902.1709,4235.929 53.795,0"
- id="path677"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 7988.4459,4235.929 53.795,0"
- id="path679"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 8075.7359,4235.929 53.795,0"
- id="path681"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 8162.0109,4235.929 53.795,0"
- id="path683"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 8249.3009,4235.929 53.795,0"
- id="path685"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 8335.5759,4235.929 53.795,0"
- id="path687"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 8421.8509,4235.929 53.795,0"
- id="path689"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 8509.1409,4235.929 53.795,0"
- id="path691"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 8595.4159,4235.929 53.795,0"
- id="path693"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 8682.7059,4235.929 53.795,0"
- id="path695"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 8768.9809,4235.929 53.795,0"
- id="path697"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 8856.2709,4235.929 53.795,0"
- id="path699"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 8942.5459,4235.929 53.795,0"
- id="path701"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 9028.8209,4235.929 54.81,0"
- id="path703"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 9116.1109,4235.929 53.795,0"
- id="path705"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 9202.3859,4235.929 53.795,0"
- id="path707"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 9289.6759,4235.929 53.795,0"
- id="path709"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 9375.9509,4235.929 53.795,0"
- id="path711"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 9463.2409,4235.929 53.795,0"
- id="path713"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 9549.5159,4235.929 53.795,0"
- id="path715"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 9635.7909,4235.929 54.81,0"
- id="path717"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 9723.0809,4235.929 53.795,0"
- id="path719"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 9809.3559,4235.929 53.795,0"
- id="path721"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 9896.6459,4235.929 53.795,0"
- id="path723"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 9982.9209,4235.929 53.7951,0"
- id="path725"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 10070.211,4235.929 53.795,0"
- id="path727"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 10156.486,4235.929 53.795,0"
- id="path729"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 10242.761,4235.929 54.81,0"
- id="path731"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 10330.051,4235.929 53.795,0"
- id="path733"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 10416.326,4235.929 53.795,0"
- id="path735"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 10503.616,4235.929 53.795,0"
- id="path737"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 10589.891,4235.929 53.795,0"
- id="path739"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 10677.181,4235.929 53.795,0"
- id="path741"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 10763.456,4235.929 53.795,0"
- id="path743"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 10849.731,4235.929 54.81,0"
- id="path745"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 10937.021,4235.929 53.795,0"
- id="path747"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 11023.296,4235.929 53.795,0"
- id="path749"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 11110.586,4235.929 53.795,0"
- id="path751"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 11196.861,4235.929 53.795,0"
- id="path753"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 11284.151,4235.929 53.795,0"
- id="path755"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 11370.426,4235.929 53.795,0"
- id="path757"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 11457.716,4235.929 53.795,0"
- id="path759"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 11543.991,4235.929 53.795,0"
- id="path761"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 11630.266,4235.929 53.795,0"
- id="path763"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 11717.556,4235.929 53.795,0"
- id="path765"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 11803.831,4235.929 53.795,0"
- id="path767"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 11891.121,4235.929 53.795,0"
- id="path769"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 11977.396,4235.929 53.795,0"
- id="path771"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 12064.686,4235.929 53.795,0"
- id="path773"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 12150.961,4235.929 53.795,0"
- id="path775"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 12237.236,4235.929 53.795,0"
- id="path777"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 12324.526,4235.929 53.795,0"
- id="path779"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 12410.801,4235.929 53.795,0"
- id="path781"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 12498.091,4235.929 53.795,0"
- id="path783"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 12584.366,4235.929 53.795,0"
- id="path785"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 12671.656,4235.929 53.795,0"
- id="path787"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 12757.931,4235.929 53.795,0"
- id="path789"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 12844.206,4235.929 54.81,0"
- id="path791"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 12931.496,4235.929 53.795,0"
- id="path793"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 13017.771,4235.929 53.795,0"
- id="path795"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 13105.061,4235.929 53.795,0"
- id="path797"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 13191.336,4235.929 53.795,0"
- id="path799"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 13278.626,4235.929 53.795,0"
- id="path801"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 13364.901,4235.929 53.795,0"
- id="path803"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 13451.176,4235.929 54.81,0"
- id="path805"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 13538.466,4235.929 53.795,0"
- id="path807"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 13624.741,4235.929 53.795,0"
- id="path809"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 13712.031,4235.929 53.795,0"
- id="path811"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 13798.306,4235.929 53.795,0"
- id="path813"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 13885.596,4235.929 53.795,0"
- id="path815"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 13971.871,4235.929 53.795,0"
- id="path817"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 14058.146,4235.929 54.81,0"
- id="path819"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 14145.436,4235.929 53.795,0"
- id="path821"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 14231.711,4235.929 53.795,0"
- id="path823"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 14319.001,4235.929 53.795,0"
- id="path825"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 14405.276,4235.929 53.795,0"
- id="path827"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 14492.566,4235.929 53.795,0"
- id="path829"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 14578.841,4235.929 53.795,0"
- id="path831"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 14665.116,4235.929 54.81,0"
- id="path833"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 14752.406,4235.929 53.795,0"
- id="path835"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 14838.681,4235.929 53.795,0"
- id="path837"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 14925.971,4235.929 53.795,0"
- id="path839"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 15012.246,4235.929 53.795,0"
- id="path841"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 15099.536,4235.929 53.795,0"
- id="path843"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 15185.811,4235.929 53.795,0"
- id="path845"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 15272.086,4235.929 54.81,0"
- id="path847"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 15359.376,4235.929 53.795,0"
- id="path849"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 15445.651,4235.929 53.795,0"
- id="path851"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 15532.941,4235.929 53.795,0"
- id="path853"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 15619.216,4235.929 53.795,0"
- id="path855"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 15706.506,4235.929 53.795,0"
- id="path857"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 15792.781,4235.929 53.795,0"
- id="path859"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 15880.071,4235.929 53.795,0"
- id="path861"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 15966.346,4235.929 53.795,0"
- id="path863"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 16052.621,4235.929 53.795,0"
- id="path865"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 16139.911,4235.929 53.795,0"
- id="path867"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 16226.186,4235.929 53.795,0"
- id="path869"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 16313.476,4235.929 53.795,0"
- id="path871"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 16399.751,4235.929 53.795,0"
- id="path873"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 16487.041,4235.929 53.795,0"
- id="path875"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 16573.316,4235.929 53.795,0"
- id="path877"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 16659.591,4235.929 53.795,0"
- id="path879"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 16746.881,4235.929 53.795,0"
- id="path881"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 16833.156,4235.929 53.795,0"
- id="path883"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 16920.446,4235.929 53.795,0"
- id="path885"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 17006.721,4235.929 53.795,0"
- id="path887"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 17094.011,4235.929 53.795,0"
- id="path889"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 17180.286,4235.929 53.795,0"
- id="path891"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 17266.561,4235.929 54.81,0"
- id="path893"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 17353.851,4235.929 53.795,0"
- id="path895"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 17440.126,4235.929 53.795,0"
- id="path897"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 17527.416,4235.929 53.795,0"
- id="path899"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 17613.691,4235.929 53.795,0"
- id="path901"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 17700.981,4235.929 53.795,0"
- id="path903"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 17787.256,4235.929 53.795,0"
- id="path905"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 17873.531,4235.929 54.81,0"
- id="path907"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 17960.821,4235.929 53.795,0"
- id="path909"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 18047.096,4235.929 53.795,0"
- id="path911"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 18134.386,4235.929 53.795,0"
- id="path913"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 18220.661,4235.929 53.795,0"
- id="path915"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 18307.951,4235.929 53.795,0"
- id="path917"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 18394.226,4235.929 53.795,0"
- id="path919"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 18480.501,4235.929 54.81,0"
- id="path921"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 18567.791,4235.929 53.795,0"
- id="path923"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 18654.066,4235.929 53.795,0"
- id="path925"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 18741.356,4235.929 c 17.255,-0.9999 35.525,-1.9999 53.795,-4.9997"
- id="path927"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 18827.631,4225.9296 c 17.255,-3.9998 34.51,-8.9995 51.765,-13.9992"
- id="path929"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 18910.861,4200.9311 c 16.24,-5.9996 32.48,-12.9992 48.72,-20.9987"
- id="path931"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 18989.016,4164.9333 c 15.225,-7.9996 31.465,-16.999 45.675,-26.9984"
- id="path933"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19062.096,4118.936 c 14.21,-9.9994 28.42,-20.9987 42.63,-31.9981"
- id="path935"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19129.086,4064.9393 c 13.195,-11.9993 25.375,-24.9985 37.555,-37.9978"
- id="path937"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19188.971,4002.943 c 11.165,-13.9992 22.33,-27.9983 33.495,-41.9975"
- id="path939"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19240.736,3933.9471 c 10.15,-14.9991 19.285,-29.9982 27.405,-44.9973"
- id="path941"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19283.366,3859.9516 c 7.105,-15.9991 14.21,-32.9981 20.3,-48.9971"
- id="path943"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19314.831,3779.9564 c 5.075,-16.999 9.135,-33.998 13.195,-50.997"
- id="path945"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19333.101,3696.9613 c 2.03,-17.9989 4.06,-34.9979 4.06,-52.9968"
- id="path947"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19337.161,3611.9664 0,-53.9967"
- id="path949"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19337.161,3525.9716 0,-52.9968"
- id="path951"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19337.161,3440.9767 0,-52.9968"
- id="path953"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19337.161,3354.9819 0,-52.9969"
- id="path955"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19337.161,3269.987 0,-52.9969"
- id="path957"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19337.161,3183.9921 0,-52.9968"
- id="path959"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19337.161,3098.9972 0,-52.9968"
- id="path961"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19337.161,3014.0023 0,-53.9967"
- id="path963"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19337.161,2928.0075 0,-52.9968"
- id="path965"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19337.161,2843.0126 0,-52.9968"
- id="path967"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19337.161,2757.0177 0,-52.9968"
- id="path969"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19337.161,2672.0228 0,-52.9968"
- id="path971"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19337.161,2586.028 0,-52.9968"
- id="path973"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19337.161,2501.0331 0,-52.9968"
- id="path975"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19337.161,2415.0383 0,-52.9969"
- id="path977"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19337.161,2330.0434 0,-52.9969"
- id="path979"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19337.161,2245.0485 0,-52.9969"
- id="path981"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19337.161,2159.0536 0,-52.9968"
- id="path983"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19337.161,2074.0587 0,-52.9968"
- id="path985"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19337.161,1988.0639 0,-52.9968"
- id="path987"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19337.161,1903.069 0,-52.9968"
- id="path989"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19337.161,1817.0741 0,-52.9968"
- id="path991"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19337.161,1732.0792 0,-52.9968"
- id="path993"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19337.161,1647.0843 0,-52.9968"
- id="path995"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19337.161,1561.0895 0,-52.9968"
- id="path997"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19337.161,1476.0946 0,-52.9968"
- id="path999"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19337.161,1390.0998 0,-52.9969"
- id="path1001"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19337.161,1305.1049 0,-52.9969"
- id="path1003"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19337.161,1219.11 c -1.015,-16.999 -3.045,-34.9979 -5.075,-51.9969"
- id="path1005"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19325.996,1135.1151 c -4.06,-16.999 -8.12,-34.9979 -14.21,-50.997"
- id="path1007"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19300.621,1053.12 c -6.09,-15.9991 -13.195,-32.998 -21.315,-48.9971"
- id="path1009"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19264.081,976.1246 c -9.135,-15.99904 -18.27,-30.99814 -28.42,-45.99724"
- id="path1011"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19216.376,904.12892 c -10.15,-13.99916 -21.315,-27.99832 -33.495,-41.99748"
- id="path1013"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19160.551,838.13288 c -12.18,-12.99922 -24.36,-24.9985 -37.555,-36.99778"
- id="path1015"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19097.621,780.13636 c -14.21,-11.99928 -28.42,-21.99868 -42.63,-32.99802"
- id="path1017"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 19027.586,729.13942 c -15.225,-8.99946 -30.45,-17.99892 -46.69,-26.99838"
- id="path1019"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 18951.461,688.14188 c -16.24,-7.99952 -32.48,-13.99916 -49.735,-19.9988"
- id="path1021"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 18870.261,657.14374 c -17.255,-4.9997 -34.51,-8.99946 -51.765,-11.99928"
- id="path1023"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 18786.016,640.14476 c -18.27,-2.99982 -35.525,-3.99976 -53.795,-3.99976"
- id="path1025"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 18699.741,636.145 -53.795,0"
- id="path1027"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 18612.451,636.145 -53.795,0"
- id="path1029"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 18526.176,636.145 -53.795,0"
- id="path1031"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 18438.886,636.145 -53.795,0"
- id="path1033"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 18352.611,636.145 -53.795,0"
- id="path1035"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 18266.336,636.145 -54.81,0"
- id="path1037"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 18179.046,636.145 -53.795,0"
- id="path1039"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 18092.771,636.145 -53.795,0"
- id="path1041"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 18005.481,636.145 -53.795,0"
- id="path1043"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 17919.206,636.145 -53.795,0"
- id="path1045"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 17831.916,636.145 -53.795,0"
- id="path1047"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 17745.641,636.145 -53.795,0"
- id="path1049"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 17659.366,636.145 -54.81,0"
- id="path1051"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 17572.076,636.145 -53.795,0"
- id="path1053"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 17485.801,636.145 -53.795,0"
- id="path1055"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 17398.511,636.145 -53.795,0"
- id="path1057"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 17312.236,636.145 -53.795,0"
- id="path1059"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 17224.946,636.145 -53.795,0"
- id="path1061"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 17138.671,636.145 -53.795,0"
- id="path1063"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 17052.396,636.145 -54.81,0"
- id="path1065"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 16965.106,636.145 -53.795,0"
- id="path1067"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 16878.831,636.145 -53.795,0"
- id="path1069"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 16791.541,636.145 -53.795,0"
- id="path1071"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 16705.266,636.145 -53.795,0"
- id="path1073"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 16617.976,636.145 -53.795,0"
- id="path1075"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 16531.701,636.145 -53.795,0"
- id="path1077"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 16445.426,636.145 -54.81,0"
- id="path1079"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 16358.136,636.145 -53.795,0"
- id="path1081"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 16271.861,636.145 -53.795,0"
- id="path1083"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 16184.571,636.145 -53.795,0"
- id="path1085"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 16098.296,636.145 -53.795,0"
- id="path1087"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 16011.006,636.145 -53.795,0"
- id="path1089"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 15924.731,636.145 -53.795,0"
- id="path1091"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 15837.441,636.145 -53.795,0"
- id="path1093"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 15751.166,636.145 -53.795,0"
- id="path1095"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 15664.891,636.145 -53.795,0"
- id="path1097"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 15577.601,636.145 -53.795,0"
- id="path1099"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 15491.326,636.145 -53.795,0"
- id="path1101"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 15404.036,636.145 -53.795,0"
- id="path1103"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 15317.761,636.145 -53.795,0"
- id="path1105"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 15230.471,636.145 -53.795,0"
- id="path1107"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 15144.196,636.145 -53.795,0"
- id="path1109"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 15057.921,636.145 -53.795,0"
- id="path1111"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 14970.631,636.145 -53.795,0"
- id="path1113"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 14884.356,636.145 -53.795,0"
- id="path1115"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 14797.066,636.145 -53.795,0"
- id="path1117"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 14710.791,636.145 -53.795,0"
- id="path1119"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 14623.501,636.145 -53.795,0"
- id="path1121"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 14537.226,636.145 -53.795,0"
- id="path1123"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 14450.951,636.145 -54.81,0"
- id="path1125"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 14363.661,636.145 -53.795,0"
- id="path1127"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 14277.386,636.145 -53.795,0"
- id="path1129"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 14190.096,636.145 -53.795,0"
- id="path1131"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 14103.821,636.145 -53.795,0"
- id="path1133"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 14016.531,636.145 -53.795,0"
- id="path1135"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 13930.256,636.145 -53.795,0"
- id="path1137"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 13843.981,636.145 -54.81,0"
- id="path1139"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 13756.691,636.145 -53.795,0"
- id="path1141"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 13670.416,636.145 -53.795,0"
- id="path1143"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 13583.126,636.145 -53.795,0"
- id="path1145"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 13496.851,636.145 -53.795,0"
- id="path1147"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 13409.561,636.145 -53.795,0"
- id="path1149"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 13323.286,636.145 -53.795,0"
- id="path1151"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 13237.011,636.145 -54.81,0"
- id="path1153"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 13149.721,636.145 -53.795,0"
- id="path1155"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 13063.446,636.145 -53.795,0"
- id="path1157"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 12976.156,636.145 -53.795,0"
- id="path1159"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 12889.881,636.145 -53.795,0"
- id="path1161"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 12802.591,636.145 -53.795,0"
- id="path1163"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 12716.316,636.145 -53.795,0"
- id="path1165"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 12630.041,636.145 -54.81,0"
- id="path1167"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 12542.751,636.145 -53.795,0"
- id="path1169"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 12456.476,636.145 -53.795,0"
- id="path1171"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 12369.186,636.145 -53.795,0"
- id="path1173"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 12282.911,636.145 -53.795,0"
- id="path1175"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 12195.621,636.145 -53.795,0"
- id="path1177"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 12109.346,636.145 -53.795,0"
- id="path1179"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 12022.056,636.145 -53.795,0"
- id="path1181"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 11935.781,636.145 -53.795,0"
- id="path1183"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 11849.506,636.145 -53.795,0"
- id="path1185"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 11762.216,636.145 -53.795,0"
- id="path1187"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 11675.941,636.145 -53.795,0"
- id="path1189"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 11588.651,636.145 -53.795,0"
- id="path1191"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 11502.376,636.145 -53.795,0"
- id="path1193"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 11415.086,636.145 -53.795,0"
- id="path1195"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 11328.811,636.145 -53.795,0"
- id="path1197"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 11242.536,636.145 -53.795,0"
- id="path1199"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 11155.246,636.145 -53.795,0"
- id="path1201"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 11068.971,636.145 -53.795,0"
- id="path1203"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 10981.681,636.145 -53.795,0"
- id="path1205"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 10895.406,636.145 -53.795,0"
- id="path1207"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 10808.116,636.145 -53.795,0"
- id="path1209"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 10721.841,636.145 -53.795,0"
- id="path1211"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 10635.566,636.145 -53.795,0"
- id="path1213"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 10548.276,636.145 -53.795,0"
- id="path1215"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 10462.001,636.145 -53.795,0"
- id="path1217"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 10374.711,636.145 -53.795,0"
- id="path1219"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 10288.436,636.145 -53.795,0"
- id="path1221"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 10201.146,636.145 -53.795,0"
- id="path1223"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 10114.871,636.145 -53.795,0"
- id="path1225"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 10028.596,636.145 -54.8101,0"
- id="path1227"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 9941.3059,636.145 -53.795,0"
- id="path1229"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 9855.0309,636.145 -53.795,0"
- id="path1231"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 9767.7409,636.145 -53.795,0"
- id="path1233"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 9681.4659,636.145 -53.795,0"
- id="path1235"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 9594.1759,636.145 -53.795,0"
- id="path1237"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 9507.9009,636.145 -53.795,0"
- id="path1239"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 9421.6259,636.145 -54.81,0"
- id="path1241"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 9334.3359,636.145 -53.795,0"
- id="path1243"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 9248.0609,636.145 -53.795,0"
- id="path1245"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 9160.7709,636.145 -53.795,0"
- id="path1247"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 9074.4959,636.145 -53.795,0"
- id="path1249"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 8987.2059,636.145 -53.795,0"
- id="path1251"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 8900.9309,636.145 -53.795,0"
- id="path1253"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 8814.6559,636.145 -54.81,0"
- id="path1255"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 8727.3659,636.145 -53.795,0"
- id="path1257"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 8641.0909,636.145 -53.795,0"
- id="path1259"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 8553.8009,636.145 -53.795,0"
- id="path1261"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 8467.5259,636.145 -53.795,0"
- id="path1263"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 8380.2359,636.145 -53.795,0"
- id="path1265"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 8293.9609,636.145 -53.795,0"
- id="path1267"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 8207.6859,636.145 -54.81,0"
- id="path1269"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 8120.3959,636.145 -53.795,0"
- id="path1271"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 8034.1209,636.145 -53.795,0"
- id="path1273"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 7946.8309,636.145 -53.795,0"
- id="path1275"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 7860.5559,636.145 -53.795,0"
- id="path1277"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 7773.2659,636.145 -53.795,0"
- id="path1279"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 7686.9909,636.145 -53.795,0"
- id="path1281"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 7599.7009,636.145 -53.795,0"
- id="path1283"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 7513.4259,636.145 -53.795,0"
- id="path1285"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 7427.1509,636.145 -53.795,0"
- id="path1287"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 7339.8609,636.145 -53.795,0"
- id="path1289"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 7253.5859,636.145 -53.795,0"
- id="path1291"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 7166.2959,636.145 -53.795,0"
- id="path1293"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 7080.0209,636.145 -53.795,0"
- id="path1295"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 6992.7309,636.145 -53.795,0"
- id="path1297"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 6906.4559,636.145 -53.795,0"
- id="path1299"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 6820.1809,636.145 -53.795,0"
- id="path1301"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 6732.8909,636.145 -53.795,0"
- id="path1303"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 6646.6159,636.145 -53.795,0"
- id="path1305"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 6559.3259,636.145 -53.795,0"
- id="path1307"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 6473.0509,636.145 -53.795,0"
- id="path1309"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 6385.7609,636.145 -53.795,0"
- id="path1311"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 6299.4859,636.145 -53.795,0"
- id="path1313"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 6213.2109,636.145 -54.81,0"
- id="path1315"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 6125.9209,636.145 -53.795,0"
- id="path1317"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 6039.6459,636.145 -53.795,0"
- id="path1319"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 5952.3559,636.145 -53.795,0"
- id="path1321"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 5866.0809,636.145 -53.795,0"
- id="path1323"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 5778.7909,636.145 -53.795,0"
- id="path1325"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 5692.5159,636.145 -53.795,0"
- id="path1327"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 5606.2409,636.145 -54.81,0"
- id="path1329"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 5518.9509,636.145 -53.795,0"
- id="path1331"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 5432.6759,636.145 -53.795,0"
- id="path1333"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 5345.3859,636.145 -53.795,0"
- id="path1335"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 5259.1109,636.145 -53.795,0"
- id="path1337"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 5171.8209,636.145 -53.795,0"
- id="path1339"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 5085.5459,636.145 -53.795,0"
- id="path1341"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 4999.2709,636.145 -54.81,0"
- id="path1343"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 4911.9809,636.145 -53.795,0"
- id="path1345"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 4825.7059,636.145 -53.795,0"
- id="path1347"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 4738.4159,636.145 -53.795,0"
- id="path1349"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 4652.1409,636.145 -53.795,0"
- id="path1351"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 4564.8509,636.145 -53.795,0"
- id="path1353"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 4478.5759,636.145 -53.795,0"
- id="path1355"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 4392.3009,636.145 -54.81,0"
- id="path1357"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 4305.0109,636.145 -53.795,0"
- id="path1359"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 4218.7359,636.145 -53.795,0"
- id="path1361"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 4131.4459,636.145 -53.795,0"
- id="path1363"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 4045.1709,636.145 -53.795,0"
- id="path1365"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 3957.8809,636.145 -53.795,0"
- id="path1367"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 3871.6059,636.145 -53.795,0"
- id="path1369"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 3785.3309,636.145 -54.81,0"
- id="path1371"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 3698.0409,636.145 -53.795,0"
- id="path1373"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 3611.7659,636.145 -53.795,0"
- id="path1375"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 3524.4759,636.145 -53.795,0"
- id="path1377"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 3438.2009,636.145 -53.795,0"
- id="path1379"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 3350.9109,636.145 -53.795,0"
- id="path1381"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 3264.6359,636.145 -53.795,0"
- id="path1383"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 3177.3459,636.145 -53.795,0"
- id="path1385"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 3091.0709,636.145 -53.795,0"
- id="path1387"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 3004.7959,636.145 -53.795,0"
- id="path1389"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 2917.5059,636.145 -53.795,0"
- id="path1391"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 2831.2309,636.145 -53.795,0"
- id="path1393"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 2743.9409,636.145 -53.795,0"
- id="path1395"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 2657.6659,636.145 -53.795,0"
- id="path1397"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 2570.3759,636.145 -53.795,0"
- id="path1399"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 2484.1009,636.145 -53.795,0"
- id="path1401"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 2397.8259,636.145 -53.795,0"
- id="path1403"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 2310.5359,636.145 -53.795,0"
- id="path1405"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 2224.2609,636.145 -53.795,0"
- id="path1407"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 2136.9709,636.145 -53.795,0"
- id="path1409"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 2050.6959,636.145 -53.795,0"
- id="path1411"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 1963.4059,636.145 -53.795,0"
- id="path1413"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 1877.1309,636.145 -53.795,0"
- id="path1415"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 1790.8559,636.145 -54.81,0"
- id="path1417"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 1703.5659,636.145 -53.795,0"
- id="path1419"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 1617.2909,636.145 -53.795,0"
- id="path1421"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 1530.0009,636.145 -53.795,0"
- id="path1423"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 1443.7259,636.145 -53.795,0"
- id="path1425"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 1356.4359,636.145 -53.795,0"
- id="path1427"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 1270.1609,636.145 -53.795,0"
- id="path1429"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 1183.8859,636.145 -54.81,0"
- id="path1431"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 1096.5959,636.145 -53.795,0"
- id="path1433"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 1010.3209,636.145 -53.795,0"
- id="path1435"
- inkscape:connector-curvature="0" /><path
- style="fill:none;stroke:#3465af;stroke-width:28.432024"
- d="m 923.0309,636.145 -53.795,0"
- id="path1437"
- inkscape:connector-curvature="0" /><g
- id="g4044"><rect
- height="1100.7"
- width="1213.6"
- y="4753.1133"
- x="21109.146"
- id="rect1441"
- style="fill:#f3e777" /><path
- d="m 20656.146,5536.413 0,-405.46 150.7,-169.16 c 82.886,-93.039 170.53,-186.62 194.77,-207.96 l 44.069,-38.798 783.23,-0.086 783.23,-0.086 0,613.5 0,613.5 -978,0 -978,0 0,-405.46 z m 1027.7,136.98 0,-78.372 -169.91,4.925 -169.91,4.9249 -5.09,45.854 c -8.249,74.303 46.711,101.04 207.69,101.04 l 137.21,0 0,-78.372 z m 235.86,-262.94 4.495,-341.31 207.2,-8.6408 207.2,-8.6408 5.144,-46.443 c 9.596,-86.615 -41.863,-102.05 -322.02,-96.607 l -246.71,4.7956 -4.438,419.08 -4.439,419.08 74.537,0 74.538,0 4.494,-341.31 z m 391.3,313.72 c 26.41,-19.286 36.255,-41.399 32.697,-73.447 l -5.09,-45.854 -174.05,0 -174.05,0 -5.38,48.984 c -9.97,90.771 0.993,97.91 150.36,97.91 99.305,0 148.27,-7.6982 175.52,-27.594 z m -627.16,-274.84 0,-77.768 -174.05,0 -174.05,0 0,66.246 c 0,36.436 4.973,71.431 11.051,77.768 6.078,6.3366 84.401,11.521 174.05,11.521 l 163,0 0,-77.768 z m 659.89,-4.9154 5.125,-74.042 -179.18,4.9155 -179.18,4.9155 -5.38,48.984 c -10.473,95.348 -2.259,99.57 183.28,94.197 l 170.2,-4.9284 5.125,-74.042 z m -659.89,-237.63 0,-78.372 -169.91,4.925 -169.91,4.925 -5.097,73.447 -5.097,73.447 175,0 175,0 0,-78.372 z m 659.86,4.925 -5.097,-73.447 -174.05,0 -174.05,0 -5.38,48.984 c -10.289,93.673 -2.146,97.91 188.15,97.91 l 175.52,0 -5.097,-73.447 z m -659.86,-228.98 0,-77.768 -137.21,0 c -97.358,0 -147.91,7.8138 -174.05,26.902 -34.952,25.523 -49.645,92.242 -25.79,117.11 6.078,6.3366 84.401,11.521 174.05,11.521 l 163,0 0,-77.768 z"
- id="path1443"
- inkscape:connector-curvature="0"
- style="fill:#ca4677" /></g><text
- style="font-size:9.10937119px;fill-rule:evenodd;stroke-width:28.22200012;stroke-linejoin:round"
- class="TextShape"
- id="text1489"
- transform="scale(1.1035537,0.9061634)"
- x="171.41566"
- y="9913.7109"><tspan
- font-size="635px"
- font-weight="400"
- class="TextParagraph"
- id="tspan1491"
- style="font-weight:400;font-size:482.03753662px;font-family:'Times New Roman', serif" /></text>
-<g
- id="g4048"><rect
- height="2342.4341"
- width="2320.7097"
- y="13737.451"
- x="18796.941"
- id="rect1447"
- style="fill:#6076b3" /><rect
- id="rect1451"
- height="137.78799"
- x="18532.135"
- width="302.70312"
- y="13817.405"
- style="fill:#e0ee2c;fill-rule:evenodd;stroke-width:28.22200012;stroke-linejoin:round" /><rect
- id="rect1453"
- height="137.78799"
- x="18532.135"
- width="302.70312"
- y="14075.544"
- style="fill:#e0ee2c;fill-rule:evenodd;stroke-width:28.22200012;stroke-linejoin:round" /><rect
- id="rect1455"
- height="137.78799"
- x="18532.135"
- width="302.70312"
- y="14334.443"
- style="fill:#e0ee2c;fill-rule:evenodd;stroke-width:28.22200012;stroke-linejoin:round" /><rect
- id="rect1457"
- height="137.78799"
- x="18532.135"
- width="302.70312"
- y="14592.582"
- style="fill:#e0ee2c;fill-rule:evenodd;stroke-width:28.22200012;stroke-linejoin:round" /><rect
- id="rect1459"
- height="137.78799"
- x="18532.135"
- width="302.70312"
- y="14850.721"
- style="fill:#e0ee2c;fill-rule:evenodd;stroke-width:28.22200012;stroke-linejoin:round" /><rect
- id="rect1461"
- height="137.78799"
- x="18532.135"
- width="302.70312"
- y="15109.62"
- style="fill:#e0ee2c;fill-rule:evenodd;stroke-width:28.22200012;stroke-linejoin:round" /><rect
- id="rect1463"
- height="137.78799"
- x="18532.135"
- width="302.70312"
- y="15367.759"
- style="fill:#e0ee2c;fill-rule:evenodd;stroke-width:28.22200012;stroke-linejoin:round" /><rect
- id="rect1465"
- height="137.78799"
- x="18532.135"
- width="302.70312"
- y="15625.896"
- style="fill:#e0ee2c;fill-rule:evenodd;stroke-width:28.22200012;stroke-linejoin:round" /><rect
- id="rect1467"
- height="137.78799"
- x="18532.135"
- width="302.70312"
- y="15884.035"
- style="fill:#e0ee2c;fill-rule:evenodd;stroke-width:28.22200012;stroke-linejoin:round" /><rect
- id="rect1469"
- height="137.78799"
- x="21080.053"
- width="302.70312"
- y="13783.14"
- style="fill:#e0ee2c;fill-rule:evenodd;stroke-width:28.22200012;stroke-linejoin:round" /><rect
- id="rect1471"
- height="137.78799"
- x="21080.053"
- width="302.70312"
- y="14041.277"
- style="fill:#e0ee2c;fill-rule:evenodd;stroke-width:28.22200012;stroke-linejoin:round" /><rect
- id="rect1473"
- height="137.78799"
- x="21080.053"
- width="302.70312"
- y="14299.416"
- style="fill:#e0ee2c;fill-rule:evenodd;stroke-width:28.22200012;stroke-linejoin:round" /><rect
- id="rect1475"
- height="137.78799"
- x="21080.053"
- width="302.70312"
- y="14558.315"
- style="fill:#e0ee2c;fill-rule:evenodd;stroke-width:28.22200012;stroke-linejoin:round" /><rect
- id="rect1477"
- height="137.78799"
- x="21080.053"
- width="302.70312"
- y="14816.454"
- style="fill:#e0ee2c;fill-rule:evenodd;stroke-width:28.22200012;stroke-linejoin:round" /><rect
- id="rect1479"
- height="137.78799"
- x="21080.053"
- width="302.70312"
- y="15074.593"
- style="fill:#e0ee2c;fill-rule:evenodd;stroke-width:28.22200012;stroke-linejoin:round" /><rect
- id="rect1481"
- height="137.78799"
- x="21080.053"
- width="302.70312"
- y="15333.492"
- style="fill:#e0ee2c;fill-rule:evenodd;stroke-width:28.22200012;stroke-linejoin:round" /><rect
- id="rect1483"
- height="137.78799"
- x="21080.053"
- width="302.70312"
- y="15591.631"
- style="fill:#e0ee2c;fill-rule:evenodd;stroke-width:28.22200012;stroke-linejoin:round" /><rect
- id="rect1485"
- height="137.78799"
- x="21080.053"
- width="302.70312"
- y="15849.769"
- style="fill:#e0ee2c;fill-rule:evenodd;stroke-width:28.22200012;stroke-linejoin:round" /><text
- transform="scale(1.1035537,0.9061634)"
- sodipodi:linespacing="125%"
- id="text1493"
- line-height="125%"
- x="17205.688"
- y="16777.641"
- font-size="1128.9px"
- xml:space="preserve"
- style="font-size:856.96411133px;line-height:125%;font-family:Sans;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-rule:evenodd;stroke-width:28.22200012;stroke-linejoin:round"><tspan
- id="tspan1495"
- x="17205.688"
- y="16777.641">CPU</tspan></text>
-</g><text
- style="fill-rule:evenodd;stroke-width:28.22200012;stroke-linejoin:round"
- id="text1499"
- class="TextShape"
- x="-11700.553"
- y="565.61298"><tspan
- style="font-weight:400;font-size:706px;font-family:'Times New Roman', serif"
- id="tspan1501"
- class="TextParagraph"
- font-weight="400"
- font-size="706px"><tspan
- id="tspan1503"
- transform="matrix(0,-1,1,0,8509,40173)"
- class="TextPosition"
- x="12640.447"
- y="16397.613"><tspan
- style="fill:#000000"
- id="tspan1505">PCI, USB, SPI, I2C, ...</tspan></tspan></tspan></text>
-<path
- d="m 12408.066,15561.578 -1115.084,0 0,-1420.331 2230.169,0 0,1420.331 -1115.085,0 z"
- id="path1511"
- inkscape:connector-curvature="0"
- style="fill:#cfe7f5;fill-rule:evenodd;stroke-width:28.22200012;stroke-linejoin:round" /><path
- d="m 12408.066,15561.578 -1115.084,0 0,-1420.331 2230.169,0 0,1420.331 -1115.085,0 z"
- id="path1513"
- inkscape:connector-curvature="0"
- style="fill:none;fill-rule:evenodd;stroke:#3465af;stroke-width:19.84712601;stroke-linejoin:round" /><text
- style="fill-rule:evenodd;stroke-width:28.22200012;stroke-linejoin:round"
- id="text1515"
- class="TextShape"
- x="-1394.0863"
- y="590.73016"><tspan
- style="font-weight:400;font-size:635px;font-family:'Times New Roman', serif"
- id="tspan1517"
- class="TextParagraph"
- font-weight="400"
- font-size="635px"><tspan
- id="tspan1519"
- class="TextPosition"
- x="11487.915"
- y="14672.743"><tspan
- style="fill:#000000"
- id="tspan1521">Bridge</tspan></tspan></tspan></text>
-<text
- style="fill-rule:evenodd;stroke-width:28.22200012;stroke-linejoin:round"
- id="text1523"
- class="TextShape"
- x="-1450.5308"
- y="1324.5078"><tspan
- style="font-weight:400;font-size:635px;font-family:'Times New Roman', serif"
- id="tspan1525"
- class="TextParagraph"
- font-weight="400"
- font-size="635px"><tspan
- id="tspan1527"
- class="TextPosition"
- x="11431.471"
- y="15406.52"><tspan
- style="fill:#000000"
- id="tspan1529"> DMA</tspan></tspan></tspan></text>
-</svg>
\ No newline at end of file
+<?xml version="1.0" encoding="UTF-8"?>
+<svg id="svg2" width="235mm" height="179mm" clip-path="url(#a)" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" preserveAspectRatio="xMidYMid" version="1.2" viewBox="0 0 22648.239 17899.829" xml:space="preserve" xmlns="http://www.w3.org/2000/svg" xmlns:cc="http://creativecommons.org/ns#" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"><metadata id="metadata1533"><rdf:RDF><cc:Work rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/><dc:title/></cc:Work></rdf:RDF></metadata><defs id="defs4"><clipPath id="a"><rect id="rect7" width="28000" height="21000"/></clipPath></defs><path id="path11" d="m10146 2636c-518.06 0-1035.1 515-1035.1 1031v4124c0 516 517.06 1032 1035.1 1032h8572.2c518.06 0 1036.1-516 1036.1-1032v-4124c0-516-518.06-1031-1036.1-1031h-8572.2z"
+fill="#fcf" style=""/><path id="path15" d="m1505.5 13443c-293 0-585 292-585 585v2340c0 293 292 586 585 586h3275c293 0 586-293 586-586v-2340c0-293-293-585-586-585h-3275z" fill="#ffc" style=""/><path id="path19" d="m517.15 22.013c-461 0-922 461-922 922v11169c0 461 461 923 922 923h3692c461 0 922-462 922-923v-11169c0-461-461-922-922-922h-3692z" fill="#e6e6e6" style=""/><path id="path23" d="m2371.5 6438h-2260v-1086h4520v1086h-2260z" fill="#ff8080" style=""/><path id="path25" d="m2371.5 6438h-2260v-1086h4520v1086h-2260z" fill="none" stroke="#3465af" style=""/><text id="text27" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan29" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan31" class="TextPosition" x="489.5459" y="6111.0132" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan33"
+fill="#000000" font-family="Serif, serif" font-size="493.88px">Audio decoder</tspan></tspan></tspan></text>
+<path id="path37" d="m2371.5 9608h-2260v-1270h4520v1270h-2260z" fill="#ff8080" style=""/><path id="path39" d="m2371.5 9608h-2260v-1270h4520v1270h-2260z" fill="none" stroke="#3465af" style=""/><text id="text41" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan43" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan45" class="TextPosition" x="527.5459" y="9189.0127" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan47" fill="#000000" font-family="Serif, serif" font-size="493.88px">Video decoder</tspan></tspan></tspan></text>
+<path id="path51" d="m2363.5 8053h-2269v-1224h4537v1224h-2268z" fill="#ff8080" style=""/><path id="path53" d="m2363.5 8053h-2269v-1224h4537v1224h-2268z" fill="none" stroke="#3465af" style=""/><text id="text55" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan57" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan59" class="TextPosition" x="481.5459" y="7657.0132" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan61" fill="#000000" font-family="Serif, serif" font-size="493.88px">Audio encoder</tspan></tspan></tspan></text>
+<path id="path65" d="m13622 10386h-3810v-1281h7620v1281h-3810z" fill="#cfc" style=""/><path id="path67" d="m13622 10386h-3810v-1281h7620v1281h-3810z" fill="none" stroke="#3465af" style=""/><text id="text69" class="TextShape" x="-2089.4541" y="-2446.187" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan71" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan73" class="TextPosition" x="10287.546" y="9960.8135" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan75" fill="#000000" font-family="Serif, serif" font-size="493.88px">Button Key/IR input logic</tspan></tspan></tspan></text>
+<path id="path79" d="m12080 12182h-2268v-1412h4536v1412h-2268z" fill="#cfe7f5" style=""/><path id="path81" d="m12080 12182h-2268v-1412h4536v1412h-2268z" fill="none" stroke="#3465af" style=""/><text id="text83" class="TextShape" x="-2089.4541" y="-2389.7871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan85" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan87" class="TextPosition" x="10792.546" y="11692.213" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan89" fill="#000000" font-family="Serif, serif" font-size="493.88px">EEPROM</tspan></tspan></tspan></text>
+<path id="path93" d="m3050.5 15498h-1563v-1715h3126v1715h-1563z" fill="#fc9" style=""/><path id="path95" d="m3050.5 15498h-1563v-1715h3126v1715h-1563z" fill="none" stroke="#3465af" style=""/><text id="text97" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan99" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan101" class="TextPosition" x="2186.5459" y="14856.013" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan103" fill="#000000" font-family="Serif, serif" font-size="493.88px">Sensor</tspan></tspan></tspan></text>
+<path id="path107" d="m4629.5 5866 385-353v176h1167v-176l386 353-386 354v-177h-1167v177l-385-354z" fill="#729fcf" style=""/><path id="path109" d="m4629.5 5866 385-353v176h1167v-176l386 353-386 354v-177h-1167v177l-385-354z" fill="none" stroke="#3465af" style=""/><path id="path113" d="m4629.5 7448 385-353v176h1167v-176l386 353-386 354v-177h-1167v177l-385-354z" fill="#729fcf" style=""/><path id="path115" d="m4629.5 7448 385-353v176h1167v-176l386 353-386 354v-177h-1167v177l-385-354z" fill="none" stroke="#3465af" style=""/><path id="path119" d="m4631.5 8936 385-353v176h1166v-176l386 353-386 354v-177h-1166v177l-385-354z" fill="#729fcf" style=""/><path id="path121" d="m4631.5 8936 385-353v176h1166v-176l386 353-386 354v-177h-1166v177l-385-354z" fill="none" stroke="#3465af" style=""/><path id="path125" d="m7872.5 11464 385-353v176h1166v-176l386 353-386 354v-177h-1166v177l-385-354z"
+fill="#729fcf" style=""/><path id="path127" d="m7872.5 11464 385-353v176h1166v-176l386 353-386 354v-177h-1166v177l-385-354z" fill="none" stroke="#3465af" style=""/><path id="path131" d="m7872.5 9716.8 385-353v176h1166v-176l386 353-386 354v-177h-1166v177l-385-354z" fill="#729fcf" style=""/><path id="path133" d="m7872.5 9716.8 385-353v176h1166v-176l386 353-386 354v-177h-1166v177l-385-354z" fill="none" stroke="#3465af" style=""/><path id="path137" d="m7872.5 14994 670-353v176h2028v-176l671 353-671 354v-177h-2028v177l-670-354z" fill="#729fcf" style=""/><path id="path139" d="m7872.5 14994 670-353v176h2028v-176l671 353-671 354v-177h-2028v177l-670-354z" fill="none" stroke="#3465af" style=""/><path id="path143" d="m17534 14105 978.49 840.89-978.49 840.89v-420.86h-2960.5v420.86l-979.49-840.89 979.49-840.89v420.03h2960.5v-420.03z" fill="#729fcf" style=""/><path id="path145" d="m17534 14105 978.49
+840.89-978.49 840.89v-420.86h-2960.5v420.86l-979.49-840.89 979.49-840.89v420.03h2960.5v-420.03z" fill="none" stroke="#3465af" stroke-width="25.77" style=""/><text id="text149" class="TextShape" x="-9922.1533" y="-644.58704" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan151" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan153" class="TextPosition" transform="matrix(0,-1,1,0,8509,40173)" x="14418.847" y="15187.413" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan155" fill="#000000" font-family="Serif, serif" font-size="493.88px">System Bus</tspan></tspan></tspan></text>
+<path id="path159" d="m11062 7098h-1250v-875h2499v875h-1249z" fill="#cff" style=""/><path id="path161" d="m11062 7098h-1250v-875h2499v875h-1249z" fill="none" stroke="#3465af" style=""/><text id="text163" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan165" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan167" class="TextPosition" x="10125.546" y="6876.0132" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan169" fill="#000000" font-family="Serif, serif" font-size="493.88px">Demux</tspan></tspan></tspan></text>
+<path id="path173" d="m7906.5 6601 373-357v178h1130v-178l374 357-374 358v-179h-1130v179l-373-358z" fill="#729fcf" style=""/><path id="path175" d="m7906.5 6601 373-357v178h1130v-178l374 357-374 358v-179h-1130v179l-373-358z" fill="none" stroke="#3465af" style=""/><path id="path179" d="m7906.5 5214 373-358v179h1130v-179l374 358-374 358v-179h-1130v179l-373-358z" fill="#729fcf" style=""/><path id="path181" d="m7906.5 5214 373-358v179h1130v-179l374 358-374 358v-179h-1130v179l-373-358z" fill="none" stroke="#3465af" style=""/><path id="path185" d="m14233 5828h-4421v-1270h8841v1270h-4420z" fill="#cff" style=""/><path id="path187" d="m14233 5828h-4421v-1270h8841v1270h-4420z" fill="none" stroke="#3465af" style=""/><text id="text189" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan191" class="TextParagraph" font-family="Serif, serif"
+font-size="493.88px"><tspan id="tspan193" class="TextPosition" x="10696.546" y="5409.0132" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan195" fill="#000000" font-family="Serif, serif" font-size="493.88px">Conditional Access Module</tspan></tspan></tspan></text>
+<path id="path199" d="m2355.5 11123h-2269v-1224h4537v1224h-2268z" fill="#ff8080" style=""/><path id="path201" d="m2355.5 11123h-2269v-1224h4537v1224h-2268z" fill="none" stroke="#3465af" style=""/><text id="text203" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan205" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan207" class="TextPosition" x="511.5459" y="10727.013" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan209" fill="#000000" font-family="Serif, serif" font-size="493.88px">Video encoder</tspan></tspan></tspan></text>
+<path id="path213" d="m4631.5 10470 385-353v176h1166v-176l386 353-386 354v-177h-1166v177l-385-354z" fill="#729fcf" style=""/><path id="path215" d="m4631.5 10470 385-353v176h1166v-176l386 353-386 354v-177h-1166v177l-385-354z" fill="none" stroke="#3465af" style=""/><path id="path219" d="m18702 5381 385-353v176h1166v-176l386 353-386 354v-177h-1166v177l-385-354z" fill="#729fcf" style=""/><path id="path221" d="m18702 5381 385-353v176h1166v-176l386 353-386 354v-177h-1166v177l-385-354z" fill="none" stroke="#3465af" style=""/><text id="text225" class="TextShape" x="-1976.5541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan227" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan229" class="TextPosition" x="13.4459" y="12314.013" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan231" fill="#000000"
+font-family="Serif, serif" font-size="493.88px">Radio / Analog TV</tspan></tspan></tspan></text>
+<text id="text235" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan237" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan239" class="TextPosition" x="12866.546" y="8560.0127" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan241" fill="#000000" font-family="Serif, serif" font-size="493.88px">Digital TV</tspan></tspan></tspan></text>
+<text id="text245" class="TextShape" x="-8919.0537" y="-1373.787" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan247" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan249" class="TextPosition" x="5804.9458" y="17793.213" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan251" fill="#000000" font-family="Serif, serif" font-size="493.88px">PS.: picture is not complete: other blocks may be present</tspan></tspan></tspan></text>
+<text id="text255" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan257" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan259" class="TextPosition" x="2109.5459" y="16397.014" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan261" fill="#000000" font-family="Serif, serif" font-size="493.88px">Webcam</tspan></tspan></tspan></text>
+<path id="path265" d="m12463 13926h-2650v-1412h5299v1412h-2649z" fill="#f90" style=""/><path id="path267" d="m12463 13926h-2650v-1412h5299v1412h-2649z" fill="none" stroke="#3465af" style=""/><text id="text269" class="TextShape" x="-2089.4541" y="-2446.187" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan271" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan273" class="TextPosition" x="10175.546" y="13435.813" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan275" fill="#000000" font-family="Serif, serif" font-size="493.88px">Processing blocks</tspan></tspan></tspan></text>
+<path id="path279" d="m7872.5 13208 385-353v176h1166v-176l386 353-386 354v-177h-1166v177l-385-354z" fill="#729fcf" style=""/><path id="path281" d="m7872.5 13208 385-353v176h1166v-176l386 353-386 354v-177h-1166v177l-385-354z" fill="none" stroke="#3465af" style=""/><path id="path285" d="m4612.5 14790 397-353v176h1201v-176l398 353-398 354v-177h-1201v177l-397-354z" fill="#729fcf" style=""/><path id="path287" d="m4612.5 14790 397-353v176h1201v-176l398 353-398 354v-177h-1201v177l-397-354z" fill="none" stroke="#3465af" style=""/><text id="text291" class="TextShape" x="-2428.0542" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan293" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan295" class="TextPosition" x="20421.945" y="6628.0132" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan297" fill="#000000"
+font-family="Serif, serif" font-size="493.88px">Smartcard</tspan></tspan></tspan></text>
+<path id="path301" d="m623.32 436.01c-334.6 0-669.2 333-669.2 666v2668c0 333 334.6 666 669.2 666h18456c334.6 0 670.2-333 670.2-666v-2668c0-333-335.6-666-670.2-666h-18456z" fill="#fcf" style=""/><path id="path305" d="m3031.5 2991h-1614v-1816h3227v1816h-1613z" fill="#ff8080" style=""/><path id="path307" d="m3031.5 2991h-1614v-1816h3227v1816h-1613z" fill="none" stroke="#3465af" style=""/><text id="text309" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan311" class="TextParagraph"><tspan id="tspan313" class="TextPosition" x="2284.5459" y="1947.0129" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan315" fill="#000000" font-family="Serif, serif" font-size="493.88px">Tuner</tspan></tspan></tspan><tspan id="tspan317" class="TextParagraph"><tspan id="tspan319" class="TextPosition" x="2061.5459" y="2650.0129"
+font-family="Serif, serif" font-size="493.88px"><tspan id="tspan321" fill="#000000" font-family="Serif, serif" font-size="493.88px">FM/TV</tspan></tspan></tspan></text>
+<path id="path325" d="m812.55 1538c0 111 40 202 88 202h530c48 0 89-91 89-202 0-110-41-202-89-202h-530c-48 0-88 92-88 202z" fill="#ff8080" style=""/><path id="path327" d="m812.55 1538c0 111 40 202 88 202h530c48 0 89-91 89-202 0-110-41-202-89-202h-530c-48 0-88 92-88 202z" fill="none" stroke="#3465af" style=""/><path id="path329" d="m812.55 1538c0 111 40 202 88 202s88-91 88-202c0-110-40-202-88-202s-88 92-88 202z" fill="#ffb3b3" style=""/><path id="path331" d="m812.55 1538c0 111 40 202 88 202s88-91 88-202c0-110-40-202-88-202s-88 92-88 202z" fill="none" stroke="#3465af" style=""/><path id="path335" d="m813.55 2103c0 110 40 202 88 202h530c48 0 89-92 89-202s-41-203-89-203h-530c-48 0-88 93-88 203z" fill="#ff8080" style=""/><path id="path337" d="m813.55 2103c0 110 40 202 88 202h530c48 0 89-92 89-202s-41-203-89-203h-530c-48 0-88 93-88 203z" fill="none" stroke="#3465af" style=""/><path
+id="path339" d="m813.55 2103c0 110 40 202 88 202s88-92 88-202-40-203-88-203-88 93-88 203z" fill="#ffb3b3" style=""/><path id="path341" d="m813.55 2103c0 110 40 202 88 202s88-92 88-202-40-203-88-203-88 93-88 203z" fill="none" stroke="#3465af" style=""/><path id="path345" d="m4629.5 2032 385-353v176h1167v-176l386 353-386 354v-177h-1167v177l-385-354z" fill="#729fcf" style=""/><path id="path347" d="m4629.5 2032 385-353v176h1167v-176l386 353-386 354v-177h-1167v177l-385-354z" fill="none" stroke="#3465af" style=""/><path id="path351" d="m7889.5 1986 402-368v184h1217v-184l403 368-403 369v-185h-1217v185l-402-369z" fill="#729fcf" style=""/><path id="path353" d="m7889.5 1986 402-368v184h1217v-184l403 368-403 369v-185h-1217v185l-402-369z" fill="none" stroke="#3465af" style=""/><path id="path357" d="m14411 4025h-4500v-1389h9e3v1389h-4500z" fill="#cff" style=""/><path id="path359" d="m14411
+4025h-4500v-1389h9e3v1389h-4500z" fill="none" stroke="#3465af" style=""/><text id="text361" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan363" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan365" class="TextPosition" x="9961.5459" y="3546.0129" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan367" fill="#000000" font-family="Serif, serif" font-size="493.88px">Satellite Equipment Control (SEC)</tspan></tspan></tspan></text>
+<path id="path371" d="m11311 2436h-1400v-1e3h2800v1e3h-1400z" fill="#cff" style=""/><path id="path373" d="m11311 2436h-1400v-1e3h2800v1e3h-1400z" fill="none" stroke="#3465af" style=""/><text id="text375" class="TextShape" x="-2089.4541" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan377" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan379" class="TextPosition" x="10375.546" y="2152.0129" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan381" fill="#000000" font-family="Serif, serif" font-size="493.88px">Demod</tspan></tspan></tspan></text>
+<path id="path385" d="m7889.5 3287 402-368v184h1217v-184l403 368-403 369v-185h-1217v185l-402-369z" fill="#729fcf" style=""/><path id="path387" d="m7889.5 3287 402-368v184h1217v-184l403 368-403 369v-185h-1217v185l-402-369z" fill="none" stroke="#3465af" style=""/><path id="path389" d="m7906.5 9121v7302h-1270v-14605h1270v7303z" fill="#ff9" style=""/><path id="path391" d="m7906.5 9121v7302h-1270v-14605h1270v7303z" fill="none" stroke="#3465af" style=""/><text id="text393" class="TextShape" transform="rotate(-90)" x="-20792.584" y="-6589.021" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan395" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan397" class="TextPosition" transform="matrix(0,-1,1,0,-4473,23627)" x="-11215.646" y="7460.9849" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan399" fill="#000000" font-family="Serif,
+serif" font-size="493.88px">I2C Bus (control bus)</tspan></tspan></tspan></text>
+<text id="text403" class="TextShape" x="-2145.854" y="-2163.9871" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan405" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan407" class="TextPosition" x="7245.146" y="1114.0129" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan409" fill="#000000" font-family="Serif, serif" font-size="493.88px">Digital TV Frontend</tspan></tspan></tspan></text>
+<path id="path415" d="m863.15 636.14c-18.27 0-35.525 0.99994-53.795 2.9998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path417" d="m776.87 644.14c-17.255 2.9998-35.525 6.9996-52.78 11.999" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path419" d="m692.63 666.14c-16.24 5.9996-33.495 11.999-49.735 19.999" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path421" d="m613.46 700.14c-15.225 7.9995-31.465 16.999-46.69 26.998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path423" d="m539.36 745.14c-14.21 9.9994-28.42 20.999-42.63 31.998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path425" d="m471.36 798.14c-13.195 11.999-26.39 23.999-38.57 36.998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path427" d="m410.46 859.13c-11.165 12.999-22.33
+26.998-33.495 40.998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path429" d="m357.68 927.13c-10.15 13.999-19.285 28.998-28.42 44.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path431" d="m314.03 1000.1c-8.12 15.999-15.225 31.998-22.33 48.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path433" d="m280.54 1079.1c-5.075 16.999-10.15 33.998-14.21 50.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path435" d="m260.24 1162.1c-3.045 17.999-5.075 34.998-6.09 52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path437" d="m254.15 1247.1v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path439" d="m254.15 1333.1v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path441" d="m254.15 1418.1v52.997"
+fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path443" d="m254.15 1504.1v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path445" d="m254.15 1589.1v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path447" d="m254.15 1675.1v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path449" d="m254.15 1760.1v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path451" d="m254.15 1845.1v53.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path453" d="m254.15 1931.1v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path455" d="m254.15 2016.1v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path457" d="m254.15 2102.1v52.997" fill="none" stroke="#3465af" stroke-width="28.432"
+style=""/><path id="path459" d="m254.15 2187.1v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path461" d="m254.15 2273v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path463" d="m254.15 2358v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path465" d="m254.15 2443v53.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path467" d="m254.15 2529v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path469" d="m254.15 2614v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path471" d="m254.15 2700v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path473" d="m254.15 2785v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path475" d="m254.15 2871v52.997" fill="none"
+stroke="#3465af" stroke-width="28.432" style=""/><path id="path477" d="m254.15 2956v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path479" d="m254.15 3041v53.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path481" d="m254.15 3127v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path483" d="m254.15 3212v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path485" d="m254.15 3298v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path487" d="m254.15 3383v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path489" d="m254.15 3469v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path491" d="m254.15 3554v52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path493"
+d="m254.15 3639c0 17.999 1.015 35.998 3.045 52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path495" d="m262.27 3724c4.06 17.999 8.12 34.998 13.195 51.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path497" d="m285.61 3807c6.09 15.999 13.195 32.998 20.3 48.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path499" d="m321.14 3885c8.12 14.999 17.255 30.998 27.405 45.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path501" d="m366.81 3957.9c10.15 13.999 21.315 27.998 32.48 41.998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path503" d="m420.61 4023.9c12.18 12.999 25.375 25.998 38.57 37.998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path505" d="m483.54 4083.9c13.195 10.999 27.405 22.999 41.615 32.998" fill="none"
+stroke="#3465af" stroke-width="28.432" style=""/><path id="path507" d="m552.56 4135.9c14.21 9.9994 29.435 18.999 45.675 26.998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path509" d="m627.67 4178.9c15.225 6.9996 32.48 14.999 48.72 20.999" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path511" d="m707.85 4210.9c17.255 4.9997 34.51 9.9994 51.765 13.999" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path513" d="m792.1 4230.9c17.255 1.9999 35.525 3.9998 53.795 4.9997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path515" d="m878.37 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path517" d="m964.65 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path519" d="m1051.9 4235.9h53.795" fill="none" stroke="#3465af"
+stroke-width="28.432" style=""/><path id="path521" d="m1138.2 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path523" d="m1225.5 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path525" d="m1311.8 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path527" d="m1398.1 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path529" d="m1485.3 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path531" d="m1571.6 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path533" d="m1658.9 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path535" d="m1745.2 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path537"
+d="m1832.5 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path539" d="m1918.7 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path541" d="m2005 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path543" d="m2092.3 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path545" d="m2178.6 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path547" d="m2265.9 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path549" d="m2352.2 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path551" d="m2439.4 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path553" d="m2525.7 4235.9h53.795" fill="none" stroke="#3465af"
+stroke-width="28.432" style=""/><path id="path555" d="m2612 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path557" d="m2699.3 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path559" d="m2785.6 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path561" d="m2872.8 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path563" d="m2959.1 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path565" d="m3046.4 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path567" d="m3132.7 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path569" d="m3220 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path571"
+d="m3306.3 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path573" d="m3392.5 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path575" d="m3479.8 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path577" d="m3566.1 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path579" d="m3653.4 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path581" d="m3739.7 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path583" d="m3826.9 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path585" d="m3913.2 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path587" d="m3999.5 4235.9h53.795" fill="none"
+stroke="#3465af" stroke-width="28.432" style=""/><path id="path589" d="m4086.8 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path591" d="m4173.1 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path593" d="m4260.4 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path595" d="m4346.6 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path597" d="m4433.9 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path599" d="m4520.2 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path601" d="m4606.5 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path603" d="m4693.8 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432"
+style=""/><path id="path605" d="m4780 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path607" d="m4867.3 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path609" d="m4953.6 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path611" d="m5040.9 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path613" d="m5127.2 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path615" d="m5213.4 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path617" d="m5300.7 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path619" d="m5387 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path621" d="m5474.3 4235.9h53.795"
+fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path623" d="m5560.6 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path625" d="m5647.9 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path627" d="m5734.1 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path629" d="m5820.4 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path631" d="m5907.7 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path633" d="m5994 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path635" d="m6081.3 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path637" d="m6167.5 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432"
+style=""/><path id="path639" d="m6254.8 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path641" d="m6341.1 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path643" d="m6427.4 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path645" d="m6514.7 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path647" d="m6600.9 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path649" d="m6688.2 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path651" d="m6774.5 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path653" d="m6861.8 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path655" d="m6948.1
+4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path657" d="m7035.4 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path659" d="m7121.6 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path661" d="m7207.9 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path663" d="m7295.2 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path665" d="m7381.5 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path667" d="m7468.8 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path669" d="m7555 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path671" d="m7642.3 4235.9h53.795" fill="none" stroke="#3465af"
+stroke-width="28.432" style=""/><path id="path673" d="m7728.6 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path675" d="m7814.9 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path677" d="m7902.2 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path679" d="m7988.4 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path681" d="m8075.7 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path683" d="m8162 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path685" d="m8249.3 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path687" d="m8335.6 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path689"
+d="m8421.9 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path691" d="m8509.1 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path693" d="m8595.4 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path695" d="m8682.7 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path697" d="m8769 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path699" d="m8856.3 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path701" d="m8942.5 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path703" d="m9028.8 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path705" d="m9116.1 4235.9h53.795" fill="none" stroke="#3465af"
+stroke-width="28.432" style=""/><path id="path707" d="m9202.4 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path709" d="m9289.7 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path711" d="m9376 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path713" d="m9463.2 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path715" d="m9549.5 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path717" d="m9635.8 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path719" d="m9723.1 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path721" d="m9809.4 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path723"
+d="m9896.6 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path725" d="m9982.9 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path727" d="m10070 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path729" d="m10156 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path731" d="m10243 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path733" d="m10330 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path735" d="m10416 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path737" d="m10504 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path739" d="m10590 4235.9h53.795" fill="none" stroke="#3465af"
+stroke-width="28.432" style=""/><path id="path741" d="m10677 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path743" d="m10763 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path745" d="m10850 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path747" d="m10937 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path749" d="m11023 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path751" d="m11111 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path753" d="m11197 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path755" d="m11284 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path757" d="m11370
+4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path759" d="m11458 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path761" d="m11544 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path763" d="m11630 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path765" d="m11718 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path767" d="m11804 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path769" d="m11891 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path771" d="m11977 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path773" d="m12065 4235.9h53.795" fill="none" stroke="#3465af"
+stroke-width="28.432" style=""/><path id="path775" d="m12151 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path777" d="m12237 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path779" d="m12325 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path781" d="m12411 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path783" d="m12498 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path785" d="m12584 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path787" d="m12672 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path789" d="m12758 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path791"
+d="m12844 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path793" d="m12931 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path795" d="m13018 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path797" d="m13105 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path799" d="m13191 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path801" d="m13279 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path803" d="m13365 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path805" d="m13451 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path807" d="m13538 4235.9h53.795" fill="none" stroke="#3465af"
+stroke-width="28.432" style=""/><path id="path809" d="m13625 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path811" d="m13712 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path813" d="m13798 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path815" d="m13886 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path817" d="m13972 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path819" d="m14058 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path821" d="m14145 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path823" d="m14232 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path825" d="m14319
+4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path827" d="m14405 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path829" d="m14493 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path831" d="m14579 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path833" d="m14665 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path835" d="m14752 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path837" d="m14839 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path839" d="m14926 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path841" d="m15012 4235.9h53.795" fill="none" stroke="#3465af"
+stroke-width="28.432" style=""/><path id="path843" d="m15100 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path845" d="m15186 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path847" d="m15272 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path849" d="m15359 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path851" d="m15446 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path853" d="m15533 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path855" d="m15619 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path857" d="m15707 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path859" d="m15793
+4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path861" d="m15880 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path863" d="m15966 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path865" d="m16053 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path867" d="m16140 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path869" d="m16226 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path871" d="m16313 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path873" d="m16400 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path875" d="m16487 4235.9h53.795" fill="none" stroke="#3465af"
+stroke-width="28.432" style=""/><path id="path877" d="m16573 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path879" d="m16660 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path881" d="m16747 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path883" d="m16833 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path885" d="m16920 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path887" d="m17007 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path889" d="m17094 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path891" d="m17180 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path893"
+d="m17267 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path895" d="m17354 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path897" d="m17440 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path899" d="m17527 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path901" d="m17614 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path903" d="m17701 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path905" d="m17787 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path907" d="m17874 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path909" d="m17961 4235.9h53.795" fill="none" stroke="#3465af"
+stroke-width="28.432" style=""/><path id="path911" d="m18047 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path913" d="m18134 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path915" d="m18221 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path917" d="m18308 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path919" d="m18394 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path921" d="m18481 4235.9h54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path923" d="m18568 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path925" d="m18654 4235.9h53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path927" d="m18741
+4235.9c17.255-0.9999 35.525-1.9999 53.795-4.9997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path929" d="m18828 4225.9c17.255-3.9998 34.51-8.9995 51.765-13.999" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path931" d="m18911 4200.9c16.24-5.9996 32.48-12.999 48.72-20.999" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path933" d="m18989 4164.9c15.225-7.9996 31.465-16.999 45.675-26.998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path935" d="m19062 4118.9c14.21-9.9994 28.42-20.999 42.63-31.998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path937" d="m19129 4064.9c13.195-11.999 25.375-24.998 37.555-37.998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path939" d="m19189 4002.9c11.165-13.999 22.33-27.998 33.495-41.998" fill="none"
+stroke="#3465af" stroke-width="28.432" style=""/><path id="path941" d="m19241 3933.9c10.15-14.999 19.285-29.998 27.405-44.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path943" d="m19283 3860c7.105-15.999 14.21-32.998 20.3-48.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path945" d="m19315 3780c5.075-16.999 9.135-33.998 13.195-50.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path947" d="m19333 3697c2.03-17.999 4.06-34.998 4.06-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path949" d="m19337 3612v-53.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path951" d="m19337 3526v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path953" d="m19337 3441v-52.997" fill="none" stroke="#3465af" stroke-width="28.432"
+style=""/><path id="path955" d="m19337 3355v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path957" d="m19337 3270v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path959" d="m19337 3184v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path961" d="m19337 3099v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path963" d="m19337 3014v-53.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path965" d="m19337 2928v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path967" d="m19337 2843v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path969" d="m19337 2757v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path971" d="m19337 2672v-52.997" fill="none"
+stroke="#3465af" stroke-width="28.432" style=""/><path id="path973" d="m19337 2586v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path975" d="m19337 2501v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path977" d="m19337 2415v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path979" d="m19337 2330v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path981" d="m19337 2245v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path983" d="m19337 2159.1v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path985" d="m19337 2074.1v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path987" d="m19337 1988.1v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path
+id="path989" d="m19337 1903.1v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path991" d="m19337 1817.1v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path993" d="m19337 1732.1v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path995" d="m19337 1647.1v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path997" d="m19337 1561.1v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path999" d="m19337 1476.1v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1001" d="m19337 1390.1v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1003" d="m19337 1305.1v-52.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1005" d="m19337
+1219.1c-1.015-16.999-3.045-34.998-5.075-51.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1007" d="m19326 1135.1c-4.06-16.999-8.12-34.998-14.21-50.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1009" d="m19301 1053.1c-6.09-15.999-13.195-32.998-21.315-48.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1011" d="m19264 976.12c-9.135-15.999-18.27-30.998-28.42-45.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1013" d="m19216 904.13c-10.15-13.999-21.315-27.998-33.495-41.997" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1015" d="m19161 838.13c-12.18-12.999-24.36-24.998-37.555-36.998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1017" d="m19098 780.14c-14.21-11.999-28.42-21.999-42.63-32.998" fill="none"
+stroke="#3465af" stroke-width="28.432" style=""/><path id="path1019" d="m19028 729.14c-15.225-8.9995-30.45-17.999-46.69-26.998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1021" d="m18951 688.14c-16.24-7.9995-32.48-13.999-49.735-19.999" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1023" d="m18870 657.14c-17.255-4.9997-34.51-8.9995-51.765-11.999" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1025" d="m18786 640.14c-18.27-2.9998-35.525-3.9998-53.795-3.9998" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1027" d="m18700 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1029" d="m18612 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1031" d="m18526 636.14h-53.795" fill="none" stroke="#3465af"
+stroke-width="28.432" style=""/><path id="path1033" d="m18439 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1035" d="m18353 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1037" d="m18266 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1039" d="m18179 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1041" d="m18093 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1043" d="m18005 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1045" d="m17919 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1047" d="m17832 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path
+id="path1049" d="m17746 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1051" d="m17659 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1053" d="m17572 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1055" d="m17486 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1057" d="m17399 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1059" d="m17312 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1061" d="m17225 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1063" d="m17139 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1065" d="m17052 636.14h-54.81"
+fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1067" d="m16965 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1069" d="m16879 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1071" d="m16792 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1073" d="m16705 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1075" d="m16618 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1077" d="m16532 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1079" d="m16445 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1081" d="m16358 636.14h-53.795" fill="none" stroke="#3465af"
+stroke-width="28.432" style=""/><path id="path1083" d="m16272 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1085" d="m16185 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1087" d="m16098 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1089" d="m16011 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1091" d="m15925 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1093" d="m15837 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1095" d="m15751 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1097" d="m15665 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path
+id="path1099" d="m15578 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1101" d="m15491 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1103" d="m15404 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1105" d="m15318 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1107" d="m15230 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1109" d="m15144 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1111" d="m15058 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1113" d="m14971 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1115" d="m14884 636.14h-53.795"
+fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1117" d="m14797 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1119" d="m14711 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1121" d="m14624 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1123" d="m14537 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1125" d="m14451 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1127" d="m14364 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1129" d="m14277 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1131" d="m14190 636.14h-53.795" fill="none" stroke="#3465af"
+stroke-width="28.432" style=""/><path id="path1133" d="m14104 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1135" d="m14017 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1137" d="m13930 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1139" d="m13844 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1141" d="m13757 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1143" d="m13670 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1145" d="m13583 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1147" d="m13497 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path
+id="path1149" d="m13410 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1151" d="m13323 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1153" d="m13237 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1155" d="m13150 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1157" d="m13063 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1159" d="m12976 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1161" d="m12890 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1163" d="m12803 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1165" d="m12716 636.14h-53.795"
+fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1167" d="m12630 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1169" d="m12543 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1171" d="m12456 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1173" d="m12369 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1175" d="m12283 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1177" d="m12196 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1179" d="m12109 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1181" d="m12022 636.14h-53.795" fill="none" stroke="#3465af"
+stroke-width="28.432" style=""/><path id="path1183" d="m11936 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1185" d="m11850 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1187" d="m11762 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1189" d="m11676 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1191" d="m11589 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1193" d="m11502 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1195" d="m11415 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1197" d="m11329 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path
+id="path1199" d="m11243 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1201" d="m11155 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1203" d="m11069 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1205" d="m10982 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1207" d="m10895 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1209" d="m10808 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1211" d="m10722 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1213" d="m10636 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1215" d="m10548 636.14h-53.795"
+fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1217" d="m10462 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1219" d="m10375 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1221" d="m10288 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1223" d="m10201 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1225" d="m10115 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1227" d="m10029 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1229" d="m9941.3 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1231" d="m9855 636.14h-53.795" fill="none" stroke="#3465af"
+stroke-width="28.432" style=""/><path id="path1233" d="m9767.7 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1235" d="m9681.5 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1237" d="m9594.2 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1239" d="m9507.9 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1241" d="m9421.6 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1243" d="m9334.3 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1245" d="m9248.1 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1247" d="m9160.8 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432"
+style=""/><path id="path1249" d="m9074.5 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1251" d="m8987.2 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1253" d="m8900.9 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1255" d="m8814.7 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1257" d="m8727.4 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1259" d="m8641.1 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1261" d="m8553.8 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1263" d="m8467.5 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1265"
+d="m8380.2 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1267" d="m8294 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1269" d="m8207.7 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1271" d="m8120.4 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1273" d="m8034.1 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1275" d="m7946.8 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1277" d="m7860.6 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1279" d="m7773.3 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1281" d="m7687 636.14h-53.795" fill="none"
+stroke="#3465af" stroke-width="28.432" style=""/><path id="path1283" d="m7599.7 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1285" d="m7513.4 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1287" d="m7427.2 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1289" d="m7339.9 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1291" d="m7253.6 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1293" d="m7166.3 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1295" d="m7080 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1297" d="m6992.7 636.14h-53.795" fill="none" stroke="#3465af"
+stroke-width="28.432" style=""/><path id="path1299" d="m6906.5 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1301" d="m6820.2 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1303" d="m6732.9 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1305" d="m6646.6 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1307" d="m6559.3 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1309" d="m6473.1 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1311" d="m6385.8 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1313" d="m6299.5 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432"
+style=""/><path id="path1315" d="m6213.2 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1317" d="m6125.9 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1319" d="m6039.6 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1321" d="m5952.4 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1323" d="m5866.1 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1325" d="m5778.8 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1327" d="m5692.5 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1329" d="m5606.2 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1331"
+d="m5519 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1333" d="m5432.7 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1335" d="m5345.4 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1337" d="m5259.1 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1339" d="m5171.8 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1341" d="m5085.5 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1343" d="m4999.3 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1345" d="m4912 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1347" d="m4825.7 636.14h-53.795" fill="none"
+stroke="#3465af" stroke-width="28.432" style=""/><path id="path1349" d="m4738.4 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1351" d="m4652.1 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1353" d="m4564.9 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1355" d="m4478.6 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1357" d="m4392.3 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1359" d="m4305 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1361" d="m4218.7 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1363" d="m4131.4 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432"
+style=""/><path id="path1365" d="m4045.2 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1367" d="m3957.9 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1369" d="m3871.6 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1371" d="m3785.3 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1373" d="m3698 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1375" d="m3611.8 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1377" d="m3524.5 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1379" d="m3438.2 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1381"
+d="m3350.9 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1383" d="m3264.6 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1385" d="m3177.3 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1387" d="m3091.1 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1389" d="m3004.8 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1391" d="m2917.5 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1393" d="m2831.2 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1395" d="m2743.9 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1397" d="m2657.7 636.14h-53.795"
+fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1399" d="m2570.4 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1401" d="m2484.1 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1403" d="m2397.8 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1405" d="m2310.5 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1407" d="m2224.3 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1409" d="m2137 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1411" d="m2050.7 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1413" d="m1963.4 636.14h-53.795" fill="none" stroke="#3465af"
+stroke-width="28.432" style=""/><path id="path1415" d="m1877.1 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1417" d="m1790.9 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1419" d="m1703.6 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1421" d="m1617.3 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1423" d="m1530 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1425" d="m1443.7 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1427" d="m1356.4 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1429" d="m1270.2 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path
+id="path1431" d="m1183.9 636.14h-54.81" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1433" d="m1096.6 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1435" d="m1010.3 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><path id="path1437" d="m923.03 636.14h-53.795" fill="none" stroke="#3465af" stroke-width="28.432" style=""/><g id="g4044" style=""><rect id="rect1441" x="21109" y="4753.1" width="1213.6" height="1100.7" fill="#f3e777" style=""/><path id="path1443" d="m20656 5536.4v-405.46l150.7-169.16c82.886-93.039 170.53-186.62 194.77-207.96l44.069-38.798 783.23-0.086 783.23-0.086v1227h-1956v-405.46zm1027.7 136.98v-78.372l-169.91 4.925-169.91 4.9249-5.09 45.854c-8.249 74.303 46.711 101.04 207.69 101.04h137.21v-78.372zm235.86-262.94 4.495-341.31 207.2-8.6408 207.2-8.6408
+5.144-46.443c9.596-86.615-41.863-102.05-322.02-96.607l-246.71 4.7956-4.438 419.08-4.439 419.08h149.08l4.494-341.31zm391.3 313.72c26.41-19.286 36.255-41.399 32.697-73.447l-5.09-45.854h-348.1l-5.38 48.984c-9.97 90.771 0.993 97.91 150.36 97.91 99.305 0 148.27-7.6982 175.52-27.594zm-627.16-274.84v-77.768h-348.1v66.246c0 36.436 4.973 71.431 11.051 77.768 6.078 6.3366 84.401 11.521 174.05 11.521h163v-77.768zm659.89-4.9154 5.125-74.042-179.18 4.9155-179.18 4.9155-5.38 48.984c-10.473 95.348-2.259 99.57 183.28 94.197l170.2-4.9284 5.125-74.042zm-659.89-237.63v-78.372l-169.91 4.925-169.91 4.925-5.097 73.447-5.097 73.447h350v-78.372zm659.86 4.925-5.097-73.447h-348.1l-5.38 48.984c-10.289 93.673-2.146 97.91 188.15 97.91h175.52l-5.097-73.447zm-659.86-228.98v-77.768h-137.21c-97.358 0-147.91 7.8138-174.05 26.902-34.952 25.523-49.645 92.242-25.79 117.11 6.078 6.3366 84.401 11.521 174.05
+11.521h163v-77.768z" fill="#ca4677" style=""/></g><text id="text1489" class="TextShape" transform="scale(1.1036 .90616)" x="171.41566" y="9913.7109" fill-rule="evenodd" font-family="Serif, serif" font-size="493.87px" stroke-linejoin="round" stroke-width="28.222"><tspan id="tspan1491" class="TextParagraph" font-family="Serif, serif" font-size="493.87px"/></text>
+<g id="g4048" style=""><rect id="rect1447" x="18797" y="13737" width="2320.7" height="2342.4" fill="#6076b3" style=""/><rect id="rect1451" x="18532" y="13817" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1453" x="18532" y="14076" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1455" x="18532" y="14334" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1457" x="18532" y="14593" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1459" x="18532" y="14851" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round"
+stroke-width="28.222" style=""/><rect id="rect1461" x="18532" y="15110" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1463" x="18532" y="15368" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1465" x="18532" y="15626" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1467" x="18532" y="15884" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1469" x="21080" y="13783" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1471" x="21080" y="14041" width="302.7"
+height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1473" x="21080" y="14299" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1475" x="21080" y="14558" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1477" x="21080" y="14816" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1479" x="21080" y="15075" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1481" x="21080" y="15333" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round"
+stroke-width="28.222" style=""/><rect id="rect1483" x="21080" y="15592" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><rect id="rect1485" x="21080" y="15850" width="302.7" height="137.79" fill="#e0ee2c" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><text id="text1493" transform="scale(1.1036 .90616)" x="17205.688" y="16777.641" fill="#000000" fill-rule="evenodd" font-family="Sans" font-size="856.96px" letter-spacing="0px" stroke-linejoin="round" stroke-width="28.222" word-spacing="0px" style="line-height:125%" line-height="125%" xml:space="preserve"><tspan id="tspan1495" x="17205.688" y="16777.641" style="">CPU</tspan></text>
+</g><text id="text1499" class="TextShape" x="-11700.553" y="565.61298" fill-rule="evenodd" font-family="Serif, serif" font-size="493.88px" stroke-linejoin="round" stroke-width="28.222"><tspan id="tspan1501" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan1503" class="TextPosition" transform="matrix(0,-1,1,0,8509,40173)" x="12640.447" y="16397.613" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan1505" fill="#000000" font-family="Serif, serif" font-size="493.88px">PCI, USB, SPI, I2C, ...</tspan></tspan></tspan></text>
+<path id="path1511" d="m12408 15562h-1115.1v-1420.3h2230.2v1420.3h-1115.1z" fill="#cfe7f5" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" style=""/><path id="path1513" d="m12408 15562h-1115.1v-1420.3h2230.2v1420.3h-1115.1z" fill="none" stroke="#3465af" stroke-linejoin="round" stroke-width="19.847" style=""/><text id="text1515" class="TextShape" x="-1394.0863" y="590.73016" fill-rule="evenodd" font-family="Serif, serif" font-size="493.88px" stroke-linejoin="round" stroke-width="28.222"><tspan id="tspan1517" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan1519" class="TextPosition" x="11487.915" y="14672.743" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan1521" fill="#000000" font-family="Serif, serif" font-size="493.88px">Bridge</tspan></tspan></tspan></text>
+<text id="text1523" class="TextShape" x="-1450.5308" y="1324.5078" fill-rule="evenodd" font-family="Serif, serif" font-size="493.88px" stroke-linejoin="round" stroke-width="28.222"><tspan id="tspan1525" class="TextParagraph" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan1527" class="TextPosition" x="11431.471" y="15406.52" font-family="Serif, serif" font-size="493.88px"><tspan id="tspan1529" fill="#000000" font-family="Serif, serif" font-size="493.88px"> DMA</tspan></tspan></tspan></text>
+</svg>
diff --git a/Documentation/media/uapi/dvb/dvbstb.svg b/Documentation/media/uapi/dvb/dvbstb.svg
index c4140fb..4effe45 100644
--- a/Documentation/media/uapi/dvb/dvbstb.svg
+++ b/Documentation/media/uapi/dvb/dvbstb.svg
@@ -1,651 +1,17 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<svg
- xmlns:dc="http://purl.org/dc/elements/1.1/"
- xmlns:cc="http://creativecommons.org/ns#"
- xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
- xmlns:svg="http://www.w3.org/2000/svg"
- xmlns="http://www.w3.org/2000/svg"
- xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
- xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
- version="1.2"
- width="237.70221mm"
- height="126.28221mm"
- viewBox="0 0 23770.221 12628.221"
- preserveAspectRatio="xMidYMid"
- xml:space="preserve"
- id="svg2"
- inkscape:version="0.91 r13725"
- sodipodi:docname="dvbstb.svg"
- style="fill-rule:evenodd;stroke-width:28.22200012;stroke-linejoin:round"><metadata
- id="metadata519"><rdf:RDF><cc:Work
- rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
- rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title /></cc:Work></rdf:RDF></metadata><sodipodi:namedview
- pagecolor="#ffffff"
- bordercolor="#666666"
- borderopacity="1"
- objecttolerance="10"
- gridtolerance="10"
- guidetolerance="10"
- inkscape:pageopacity="0"
- inkscape:pageshadow="2"
- inkscape:window-width="1920"
- inkscape:window-height="997"
- id="namedview517"
- showgrid="false"
- inkscape:zoom="1.0818519"
- inkscape:cx="411.31718"
- inkscape:cy="274.87517"
- inkscape:window-x="1920"
- inkscape:window-y="30"
- inkscape:window-maximized="1"
- inkscape:current-layer="svg2"
- fit-margin-top="0"
- fit-margin-left="0"
- fit-margin-right="0"
- fit-margin-bottom="0" /><defs
- class="ClipPathGroup"
- id="defs4" /><defs
- id="defs9" /><defs
- id="defs90" /><defs
- id="defs113" /><defs
- class="TextShapeIndex"
- id="defs124" /><defs
- class="EmbeddedBulletChars"
- id="defs128" /><defs
- class="TextEmbeddedBitmaps"
- id="defs157" /><rect
- class="BoundingBox"
- x="5355.1108"
- y="13.111"
- width="18403"
- height="9603"
- id="rect197"
- style="fill:none;stroke:none" /><path
- d="m 14556.111,9614.111 -9200,0 0,-9600 18400,0 0,9600 -9200,0 z"
- id="path199"
- inkscape:connector-curvature="0"
- style="fill:#ffffff;stroke:none" /><path
- d="m 14556.111,9614.111 -9200,0 0,-9600 18400,0 0,9600 -9200,0 z"
- id="path201"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><rect
- class="BoundingBox"
- x="13.111"
- y="4013.1111"
- width="4544"
- height="2403"
- id="rect206"
- style="fill:none;stroke:none" /><path
- d="m 2285.111,6414.111 -2271,0 0,-2400 4541,0 0,2400 -2270,0 z"
- id="path208"
- inkscape:connector-curvature="0"
- style="fill:#ffffff;stroke:none" /><path
- d="m 2285.111,6414.111 -2271,0 0,-2400 4541,0 0,2400 -2270,0 z"
- id="path210"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><text
- class="TextShape"
- id="text212"
- y="-4585.8892"
- x="-2443.8889"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan214"
- style="font-weight:400;font-size:635px;font-family:'Liberation Sans', sans-serif"><tspan
- class="TextPosition"
- x="1281.111"
- y="5435.1108"
- id="tspan216"><tspan
- id="tspan218"
- style="fill:#000000;stroke:none">Antena</tspan></tspan></tspan></text>
-<rect
- class="BoundingBox"
- x="6213.1108"
- y="1813.111"
- width="4544"
- height="2403"
- id="rect223"
- style="fill:none;stroke:none" /><path
- d="m 8485.111,4214.111 -2271,0 0,-2400 4541,0 0,2400 -2270,0 z"
- id="path225"
- inkscape:connector-curvature="0"
- style="fill:#ffffff;stroke:none" /><path
- d="m 8485.111,4214.111 -2271,0 0,-2400 4541,0 0,2400 -2270,0 z"
- id="path227"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><text
- class="TextShape"
- id="text229"
- x="-2443.8889"
- y="-4585.8892"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan231"
- style="font-weight:400;font-size:635px;font-family:'Liberation Sans', sans-serif"><tspan
- class="TextPosition"
- x="7217.1108"
- y="3235.1111"
- id="tspan233"><tspan
- id="tspan235"
- style="fill:#000000;stroke:none">Frontend</tspan></tspan></tspan></text>
-<rect
- class="BoundingBox"
- x="12113.111"
- y="1813.111"
- width="4544"
- height="2403"
- id="rect240"
- style="fill:none;stroke:none" /><path
- d="m 14385.111,4214.111 -2271,0 0,-2400 4541,0 0,2400 -2270,0 z"
- id="path242"
- inkscape:connector-curvature="0"
- style="fill:#ffffff;stroke:none" /><path
- d="m 14385.111,4214.111 -2271,0 0,-2400 4541,0 0,2400 -2270,0 z"
- id="path244"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><text
- class="TextShape"
- id="text246"
- x="-2443.8889"
- y="-4585.8892"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan248"
- style="font-weight:400;font-size:635px;font-family:'Liberation Sans', sans-serif"><tspan
- class="TextPosition"
- x="13944.111"
- y="3235.1111"
- id="tspan250"><tspan
- id="tspan252"
- style="fill:#000000;stroke:none">CA</tspan></tspan></tspan></text>
-<rect
- class="BoundingBox"
- x="18113.111"
- y="1813.111"
- width="4544"
- height="2403"
- id="rect257"
- style="fill:none;stroke:none" /><path
- d="m 20385.111,4214.111 -2271,0 0,-2400 4541,0 0,2400 -2270,0 z"
- id="path259"
- inkscape:connector-curvature="0"
- style="fill:#ffffff;stroke:none" /><path
- d="m 20385.111,4214.111 -2271,0 0,-2400 4541,0 0,2400 -2270,0 z"
- id="path261"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><text
- class="TextShape"
- id="text263"
- x="-2443.8889"
- y="-4585.8892"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan265"
- style="font-weight:400;font-size:635px;font-family:'Liberation Sans', sans-serif"><tspan
- class="TextPosition"
- x="19384.111"
- y="3235.1111"
- id="tspan267"><tspan
- id="tspan269"
- style="fill:#000000;stroke:none">Demux</tspan></tspan></tspan></text>
-<rect
- class="BoundingBox"
- x="6113.1108"
- y="5813.1108"
- width="4544"
- height="2403"
- id="rect274"
- style="fill:none;stroke:none" /><path
- d="m 8385.111,8214.111 -2271,0 0,-2400 4541,0 0,2400 -2270,0 z"
- id="path276"
- inkscape:connector-curvature="0"
- style="fill:#ffffff;stroke:none" /><path
- d="m 8385.111,8214.111 -2271,0 0,-2400 4541,0 0,2400 -2270,0 z"
- id="path278"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><text
- class="TextShape"
- id="text280"
- x="-2443.8889"
- y="-4585.8892"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan282"
- style="font-weight:400;font-size:635px;font-family:'Liberation Sans', sans-serif"><tspan
- class="TextPosition"
- x="7733.1108"
- y="7235.1108"
- id="tspan284"><tspan
- id="tspan286"
- style="fill:#000000;stroke:none">SEC</tspan></tspan></tspan></text>
-<rect
- class="BoundingBox"
- x="12213.111"
- y="5813.1108"
- width="4544"
- height="2403"
- id="rect291"
- style="fill:none;stroke:none" /><path
- d="m 14485.111,8214.111 -2271,0 0,-2400 4541,0 0,2400 -2270,0 z"
- id="path293"
- inkscape:connector-curvature="0"
- style="fill:#ffffff;stroke:none" /><path
- d="m 14485.111,8214.111 -2271,0 0,-2400 4541,0 0,2400 -2270,0 z"
- id="path295"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><text
- class="TextShape"
- id="text297"
- x="-2443.8889"
- y="-4585.8892"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan299"
- style="font-weight:400;font-size:635px;font-family:'Liberation Sans', sans-serif"><tspan
- class="TextPosition"
- x="13676.111"
- y="7235.1108"
- id="tspan301"><tspan
- id="tspan303"
- style="fill:#000000;stroke:none">Audio</tspan></tspan></tspan></text>
-<rect
- class="BoundingBox"
- x="18113.111"
- y="5813.1108"
- width="4544"
- height="2403"
- id="rect308"
- style="fill:none;stroke:none" /><path
- d="m 20385.111,8214.111 -2271,0 0,-2400 4541,0 0,2400 -2270,0 z"
- id="path310"
- inkscape:connector-curvature="0"
- style="fill:#ffffff;stroke:none" /><path
- d="m 20385.111,8214.111 -2271,0 0,-2400 4541,0 0,2400 -2270,0 z"
- id="path312"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><text
- class="TextShape"
- id="text314"
- x="-2443.8889"
- y="-4585.8892"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan316"
- style="font-weight:400;font-size:635px;font-family:'Liberation Sans', sans-serif"><tspan
- class="TextPosition"
- x="19583.111"
- y="7235.1108"
- id="tspan318"><tspan
- id="tspan320"
- style="fill:#000000;stroke:none">Video</tspan></tspan></tspan></text>
-<rect
- class="BoundingBox"
- x="15213.111"
- y="10213.111"
- width="4544"
- height="2403"
- id="rect325"
- style="fill:none;stroke:none" /><path
- d="m 17485.111,12614.111 -2271,0 0,-2400 4541,0 0,2400 -2270,0 z"
- id="path327"
- inkscape:connector-curvature="0"
- style="fill:#ffffff;stroke:none" /><path
- d="m 17485.111,12614.111 -2271,0 0,-2400 4541,0 0,2400 -2270,0 z"
- id="path329"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><text
- class="TextShape"
- id="text331"
- x="-2443.8889"
- y="-4585.8892"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan333"
- style="font-weight:400;font-size:635px;font-family:'Liberation Sans', sans-serif"><tspan
- class="TextPosition"
- x="17076.111"
- y="11635.111"
- id="tspan335"><tspan
- id="tspan337"
- style="fill:#000000;stroke:none">TV</tspan></tspan></tspan></text>
-<rect
- class="BoundingBox"
- x="4555.1108"
- y="3014.1111"
- width="1661"
- height="2202"
- id="rect342"
- style="fill:none;stroke:none" /><path
- d="m 4556.111,5214.111 1400,-1857"
- id="path344"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 6215.111,3014.111 -391,269 240,181 151,-450 z"
- id="path346"
- inkscape:connector-curvature="0"
- style="fill:#000000;stroke:none" /><rect
- class="BoundingBox"
- x="4555.1108"
- y="5213.1108"
- width="1561"
- height="1802"
- id="rect351"
- style="fill:none;stroke:none" /><path
- d="m 4556.111,5214.111 1277,1475"
- id="path353"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 6115.111,7014.111 -181,-438 -227,196 408,242 z"
- id="path355"
- inkscape:connector-curvature="0"
- style="fill:#000000;stroke:none" /><rect
- class="BoundingBox"
- x="10755.111"
- y="2864.1111"
- width="1361"
- height="301"
- id="rect360"
- style="fill:none;stroke:none" /><path
- d="m 10756.111,3014.111 929,0"
- id="path362"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 12115.111,3014.111 -450,-150 0,300 450,-150 z"
- id="path364"
- inkscape:connector-curvature="0"
- style="fill:#000000;stroke:none" /><rect
- class="BoundingBox"
- x="16655.111"
- y="2864.1111"
- width="1461"
- height="301"
- id="rect369"
- style="fill:none;stroke:none" /><path
- d="m 16656.111,3014.111 1029,0"
- id="path371"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 18115.111,3014.111 -450,-150 0,300 450,-150 z"
- id="path373"
- inkscape:connector-curvature="0"
- style="fill:#000000;stroke:none" /><rect
- class="BoundingBox"
- x="20235.111"
- y="4213.1108"
- width="301"
- height="1602"
- id="rect378"
- style="fill:none;stroke:none" /><path
- d="m 20385.111,4214.111 0,1170"
- id="path380"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 20385.111,5814.111 150,-450 -300,0 150,450 z"
- id="path382"
- inkscape:connector-curvature="0"
- style="fill:#000000;stroke:none" /><rect
- class="BoundingBox"
- x="17485.111"
- y="8213.1113"
- width="2902"
- height="2002"
- id="rect387"
- style="fill:none;stroke:none" /><path
- d="m 20385.111,8214.111 -2546,1756"
- id="path389"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 17485.111,10214.111 456,-132 -171,-247 -285,379 z"
- id="path391"
- inkscape:connector-curvature="0"
- style="fill:#000000;stroke:none" /><rect
- class="BoundingBox"
- x="14484.111"
- y="8213.1113"
- width="3002"
- height="2002"
- id="rect396"
- style="fill:none;stroke:none" /><path
- d="m 14485.111,8214.111 2642,1761"
- id="path398"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 17485.111,10214.111 -291,-374 -167,249 458,125 z"
- id="path400"
- inkscape:connector-curvature="0"
- style="fill:#000000;stroke:none" /><rect
- class="BoundingBox"
- x="14485.111"
- y="4213.1108"
- width="5902"
- height="1629"
- id="rect405"
- style="fill:none;stroke:none" /><path
- d="m 20385.111,4214.111 -51,14"
- id="path407"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 20283.111,4242.111 -52,14"
- id="path409"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 20180.111,4270.111 -51,13"
- id="path411"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 20078.111,4297.111 -52,14"
- id="path413"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 19975.111,4325.111 -51,14"
- id="path415"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 19873.111,4353.111 -52,14"
- id="path417"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 19770.111,4381.111 -51,14"
- id="path419"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 19668.111,4409.111 -52,13"
- id="path421"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 19565.111,4436.111 -51,14"
- id="path423"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 19463.111,4464.111 -52,14"
- id="path425"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 19360.111,4492.111 -51,14"
- id="path427"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 19258.111,4520.111 -52,14"
- id="path429"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 19155.111,4547.111 -51,14"
- id="path431"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 19053.111,4575.111 -52,14"
- id="path433"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 18950.111,4603.111 -51,14"
- id="path435"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 18848.111,4631.111 -51,14"
- id="path437"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 18745.111,4659.111 -51,14"
- id="path439"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 18643.111,4686.111 -51,14"
- id="path441"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 18540.111,4714.111 -51,14"
- id="path443"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 18438.111,4742.111 -51,14"
- id="path445"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 18335.111,4770.111 -51,14"
- id="path447"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 18233.111,4798.111 -51,14"
- id="path449"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 18130.111,4825.111 -51,14"
- id="path451"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 18028.111,4853.111 -51,14"
- id="path453"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 17925.111,4881.111 -51,14"
- id="path455"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 17823.111,4909.111 -51,14"
- id="path457"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 17720.111,4937.111 -51,13"
- id="path459"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 17618.111,4964.111 -51,14"
- id="path461"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 17516.111,4992.111 -52,14"
- id="path463"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 17413.111,5020.111 -51,14"
- id="path465"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 17311.111,5048.111 -52,14"
- id="path467"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 17208.111,5076.111 -51,13"
- id="path469"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 17106.111,5103.111 -52,14"
- id="path471"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 17003.111,5131.111 -51,14"
- id="path473"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 16901.111,5159.111 -52,14"
- id="path475"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 16798.111,5187.111 -51,14"
- id="path477"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 16696.111,5214.111 -52,14"
- id="path479"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 16593.111,5242.111 -51,14"
- id="path481"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 16491.111,5270.111 -52,14"
- id="path483"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 16388.111,5298.111 -51,14"
- id="path485"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 16286.111,5326.111 -52,14"
- id="path487"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 16183.111,5353.111 -51,14"
- id="path489"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 16081.111,5381.111 -51,14"
- id="path491"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 15978.111,5409.111 -51,14"
- id="path493"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 15876.111,5437.111 -51,14"
- id="path495"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 15773.111,5465.111 -51,14"
- id="path497"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 15671.111,5492.111 -51,14"
- id="path499"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 15568.111,5520.111 -51,14"
- id="path501"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 15466.111,5548.111 -51,14"
- id="path503"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 15363.111,5576.111 -51,14"
- id="path505"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 15261.111,5604.111 -51,13"
- id="path507"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 15158.111,5631.111 -51,14"
- id="path509"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 15056.111,5659.111 -51,14"
- id="path511"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 14953.111,5687.111 -51,14"
- id="path513"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000" /><path
- d="m 14485.111,5814.111 474,27 -79,-290 -395,263 z"
- id="path515"
- inkscape:connector-curvature="0"
- style="fill:#000000;stroke:none" /></svg>
\ No newline at end of file
+<?xml version="1.0" encoding="UTF-8"?>
+<svg id="svg2" width="237.7mm" height="126.28mm" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" preserveAspectRatio="xMidYMid" version="1.2" viewBox="0 0 23770.221 12628.221" xml:space="preserve" xmlns="http://www.w3.org/2000/svg" xmlns:cc="http://creativecommons.org/ns#" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"><metadata id="metadata519"><rdf:RDF><cc:Work rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/><dc:title/></cc:Work></rdf:RDF></metadata><rect id="rect197" class="BoundingBox" x="5355.1" y="13.111" width="18403" height="9603" fill="none"/><path id="path199" d="m14556 9614.1h-9200v-9600h18400v9600h-9200z" fill="#fff"/><path id="path201" d="m14556 9614.1h-9200v-9600h18400v9600h-9200z" fill="none" stroke="#000"/><rect id="rect206"
+class="BoundingBox" x="13.111" y="4013.1" width="4544" height="2403" fill="none"/><path id="path208" d="m2285.1 6414.1h-2271v-2400h4541v2400h-2270z" fill="#fff"/><path id="path210" d="m2285.1 6414.1h-2271v-2400h4541v2400h-2270z" fill="none" stroke="#000"/><text id="text212" class="TextShape" x="-2443.8889" y="-4585.8892"><tspan id="tspan214" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan216" class="TextPosition" x="1281.111" y="5435.1108"><tspan id="tspan218" fill="#000000">Antena</tspan></tspan></tspan></text>
+<rect id="rect223" class="BoundingBox" x="6213.1" y="1813.1" width="4544" height="2403" fill="none"/><path id="path225" d="m8485.1 4214.1h-2271v-2400h4541v2400h-2270z" fill="#fff"/><path id="path227" d="m8485.1 4214.1h-2271v-2400h4541v2400h-2270z" fill="none" stroke="#000"/><text id="text229" class="TextShape" x="-2443.8889" y="-4585.8892"><tspan id="tspan231" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan233" class="TextPosition" x="7217.1108" y="3235.1111"><tspan id="tspan235" fill="#000000">Frontend</tspan></tspan></tspan></text>
+<rect id="rect240" class="BoundingBox" x="12113" y="1813.1" width="4544" height="2403" fill="none"/><path id="path242" d="m14385 4214.1h-2271v-2400h4541v2400h-2270z" fill="#fff"/><path id="path244" d="m14385 4214.1h-2271v-2400h4541v2400h-2270z" fill="none" stroke="#000"/><text id="text246" class="TextShape" x="-2443.8889" y="-4585.8892"><tspan id="tspan248" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan250" class="TextPosition" x="13944.111" y="3235.1111"><tspan id="tspan252" fill="#000000">CA</tspan></tspan></tspan></text>
+<rect id="rect257" class="BoundingBox" x="18113" y="1813.1" width="4544" height="2403" fill="none"/><path id="path259" d="m20385 4214.1h-2271v-2400h4541v2400h-2270z" fill="#fff"/><path id="path261" d="m20385 4214.1h-2271v-2400h4541v2400h-2270z" fill="none" stroke="#000"/><text id="text263" class="TextShape" x="-2443.8889" y="-4585.8892"><tspan id="tspan265" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan267" class="TextPosition" x="19384.111" y="3235.1111"><tspan id="tspan269" fill="#000000">Demux</tspan></tspan></tspan></text>
+<rect id="rect274" class="BoundingBox" x="6113.1" y="5813.1" width="4544" height="2403" fill="none"/><path id="path276" d="m8385.1 8214.1h-2271v-2400h4541v2400h-2270z" fill="#fff"/><path id="path278" d="m8385.1 8214.1h-2271v-2400h4541v2400h-2270z" fill="none" stroke="#000"/><text id="text280" class="TextShape" x="-2443.8889" y="-4585.8892"><tspan id="tspan282" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan284" class="TextPosition" x="7733.1108" y="7235.1108"><tspan id="tspan286" fill="#000000">SEC</tspan></tspan></tspan></text>
+<rect id="rect291" class="BoundingBox" x="12213" y="5813.1" width="4544" height="2403" fill="none"/><path id="path293" d="m14485 8214.1h-2271v-2400h4541v2400h-2270z" fill="#fff"/><path id="path295" d="m14485 8214.1h-2271v-2400h4541v2400h-2270z" fill="none" stroke="#000"/><text id="text297" class="TextShape" x="-2443.8889" y="-4585.8892"><tspan id="tspan299" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan301" class="TextPosition" x="13676.111" y="7235.1108"><tspan id="tspan303" fill="#000000">Audio</tspan></tspan></tspan></text>
+<rect id="rect308" class="BoundingBox" x="18113" y="5813.1" width="4544" height="2403" fill="none"/><path id="path310" d="m20385 8214.1h-2271v-2400h4541v2400h-2270z" fill="#fff"/><path id="path312" d="m20385 8214.1h-2271v-2400h4541v2400h-2270z" fill="none" stroke="#000"/><text id="text314" class="TextShape" x="-2443.8889" y="-4585.8892"><tspan id="tspan316" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan318" class="TextPosition" x="19583.111" y="7235.1108"><tspan id="tspan320" fill="#000000">Video</tspan></tspan></tspan></text>
+<rect id="rect325" class="BoundingBox" x="15213" y="10213" width="4544" height="2403" fill="none"/><path id="path327" d="m17485 12614h-2271v-2400h4541v2400h-2270z" fill="#fff"/><path id="path329" d="m17485 12614h-2271v-2400h4541v2400h-2270z" fill="none" stroke="#000"/><text id="text331" class="TextShape" x="-2443.8889" y="-4585.8892"><tspan id="tspan333" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan335" class="TextPosition" x="17076.111" y="11635.111"><tspan id="tspan337" fill="#000000">TV</tspan></tspan></tspan></text>
+<rect id="rect342" class="BoundingBox" x="4555.1" y="3014.1" width="1661" height="2202" fill="none"/><path id="path344" d="m4556.1 5214.1 1400-1857" fill="none" stroke="#000"/><path id="path346" d="m6215.1 3014.1-391 269 240 181 151-450z"/><rect id="rect351" class="BoundingBox" x="4555.1" y="5213.1" width="1561" height="1802" fill="none"/><path id="path353" d="m4556.1 5214.1 1277 1475" fill="none" stroke="#000"/><path id="path355" d="m6115.1 7014.1-181-438-227 196 408 242z"/><rect id="rect360" class="BoundingBox" x="10755" y="2864.1" width="1361" height="301" fill="none"/><path id="path362" d="m10756 3014.1h929" fill="none" stroke="#000"/><path id="path364" d="m12115 3014.1-450-150v300l450-150z"/><rect id="rect369" class="BoundingBox" x="16655" y="2864.1" width="1461" height="301" fill="none"/><path id="path371" d="m16656 3014.1h1029" fill="none" stroke="#000"/><path id="path373"
+d="m18115 3014.1-450-150v300l450-150z"/><rect id="rect378" class="BoundingBox" x="20235" y="4213.1" width="301" height="1602" fill="none"/><path id="path380" d="m20385 4214.1v1170" fill="none" stroke="#000"/><path id="path382" d="m20385 5814.1 150-450h-300l150 450z"/><rect id="rect387" class="BoundingBox" x="17485" y="8213.1" width="2902" height="2002" fill="none"/><path id="path389" d="m20385 8214.1-2546 1756" fill="none" stroke="#000"/><path id="path391" d="m17485 10214 456-132-171-247-285 379z"/><rect id="rect396" class="BoundingBox" x="14484" y="8213.1" width="3002" height="2002" fill="none"/><path id="path398" d="m14485 8214.1 2642 1761" fill="none" stroke="#000"/><path id="path400" d="m17485 10214-291-374-167 249 458 125z"/><rect id="rect405" class="BoundingBox" x="14485" y="4213.1" width="5902" height="1629" fill="none"/><path id="path407" d="m20385 4214.1-51 14" fill="none"
+stroke="#000"/><path id="path409" d="m20283 4242.1-52 14" fill="none" stroke="#000"/><path id="path411" d="m20180 4270.1-51 13" fill="none" stroke="#000"/><path id="path413" d="m20078 4297.1-52 14" fill="none" stroke="#000"/><path id="path415" d="m19975 4325.1-51 14" fill="none" stroke="#000"/><path id="path417" d="m19873 4353.1-52 14" fill="none" stroke="#000"/><path id="path419" d="m19770 4381.1-51 14" fill="none" stroke="#000"/><path id="path421" d="m19668 4409.1-52 13" fill="none" stroke="#000"/><path id="path423" d="m19565 4436.1-51 14" fill="none" stroke="#000"/><path id="path425" d="m19463 4464.1-52 14" fill="none" stroke="#000"/><path id="path427" d="m19360 4492.1-51 14" fill="none" stroke="#000"/><path id="path429" d="m19258 4520.1-52 14" fill="none" stroke="#000"/><path id="path431" d="m19155 4547.1-51 14" fill="none" stroke="#000"/><path id="path433" d="m19053 4575.1-52 14"
+fill="none" stroke="#000"/><path id="path435" d="m18950 4603.1-51 14" fill="none" stroke="#000"/><path id="path437" d="m18848 4631.1-51 14" fill="none" stroke="#000"/><path id="path439" d="m18745 4659.1-51 14" fill="none" stroke="#000"/><path id="path441" d="m18643 4686.1-51 14" fill="none" stroke="#000"/><path id="path443" d="m18540 4714.1-51 14" fill="none" stroke="#000"/><path id="path445" d="m18438 4742.1-51 14" fill="none" stroke="#000"/><path id="path447" d="m18335 4770.1-51 14" fill="none" stroke="#000"/><path id="path449" d="m18233 4798.1-51 14" fill="none" stroke="#000"/><path id="path451" d="m18130 4825.1-51 14" fill="none" stroke="#000"/><path id="path453" d="m18028 4853.1-51 14" fill="none" stroke="#000"/><path id="path455" d="m17925 4881.1-51 14" fill="none" stroke="#000"/><path id="path457" d="m17823 4909.1-51 14" fill="none" stroke="#000"/><path id="path459" d="m17720
+4937.1-51 13" fill="none" stroke="#000"/><path id="path461" d="m17618 4964.1-51 14" fill="none" stroke="#000"/><path id="path463" d="m17516 4992.1-52 14" fill="none" stroke="#000"/><path id="path465" d="m17413 5020.1-51 14" fill="none" stroke="#000"/><path id="path467" d="m17311 5048.1-52 14" fill="none" stroke="#000"/><path id="path469" d="m17208 5076.1-51 13" fill="none" stroke="#000"/><path id="path471" d="m17106 5103.1-52 14" fill="none" stroke="#000"/><path id="path473" d="m17003 5131.1-51 14" fill="none" stroke="#000"/><path id="path475" d="m16901 5159.1-52 14" fill="none" stroke="#000"/><path id="path477" d="m16798 5187.1-51 14" fill="none" stroke="#000"/><path id="path479" d="m16696 5214.1-52 14" fill="none" stroke="#000"/><path id="path481" d="m16593 5242.1-51 14" fill="none" stroke="#000"/><path id="path483" d="m16491 5270.1-52 14" fill="none" stroke="#000"/><path id="path485"
+d="m16388 5298.1-51 14" fill="none" stroke="#000"/><path id="path487" d="m16286 5326.1-52 14" fill="none" stroke="#000"/><path id="path489" d="m16183 5353.1-51 14" fill="none" stroke="#000"/><path id="path491" d="m16081 5381.1-51 14" fill="none" stroke="#000"/><path id="path493" d="m15978 5409.1-51 14" fill="none" stroke="#000"/><path id="path495" d="m15876 5437.1-51 14" fill="none" stroke="#000"/><path id="path497" d="m15773 5465.1-51 14" fill="none" stroke="#000"/><path id="path499" d="m15671 5492.1-51 14" fill="none" stroke="#000"/><path id="path501" d="m15568 5520.1-51 14" fill="none" stroke="#000"/><path id="path503" d="m15466 5548.1-51 14" fill="none" stroke="#000"/><path id="path505" d="m15363 5576.1-51 14" fill="none" stroke="#000"/><path id="path507" d="m15261 5604.1-51 13" fill="none" stroke="#000"/><path id="path509" d="m15158 5631.1-51 14" fill="none" stroke="#000"/><path
+id="path511" d="m15056 5659.1-51 14" fill="none" stroke="#000"/><path id="path513" d="m14953 5687.1-51 14" fill="none" stroke="#000"/><path id="path515" d="m14485 5814.1 474 27-79-290-395 263z"/></svg>
diff --git a/Documentation/media/uapi/v4l/bayer.svg b/Documentation/media/uapi/v4l/bayer.svg
index fbd4cfb..c395113 100644
--- a/Documentation/media/uapi/v4l/bayer.svg
+++ b/Documentation/media/uapi/v4l/bayer.svg
@@ -1,984 +1,29 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<svg
- xmlns:dc="http://purl.org/dc/elements/1.1/"
- xmlns:cc="http://creativecommons.org/ns#"
- xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
- xmlns:svg="http://www.w3.org/2000/svg"
- xmlns="http://www.w3.org/2000/svg"
- xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
- xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
- version="1.2"
- width="164.15334mm"
- height="46.771107mm"
- viewBox="0 0 16415.333 4677.1107"
- preserveAspectRatio="xMidYMid"
- xml:space="preserve"
- id="svg2"
- inkscape:version="0.91 r13725"
- sodipodi:docname="bayer.svg"
- style="fill-rule:evenodd;stroke-width:28.22200012;stroke-linejoin:round"><metadata
- id="metadata652"><rdf:RDF><cc:Work
- rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
- rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title></dc:title></cc:Work></rdf:RDF></metadata><sodipodi:namedview
- pagecolor="#ffffff"
- bordercolor="#666666"
- borderopacity="1"
- objecttolerance="10"
- gridtolerance="10"
- guidetolerance="10"
- inkscape:pageopacity="0"
- inkscape:pageshadow="2"
- inkscape:window-width="1920"
- inkscape:window-height="997"
- id="namedview650"
- showgrid="false"
- fit-margin-top="0"
- fit-margin-left="0"
- fit-margin-right="0"
- fit-margin-bottom="0"
- inkscape:zoom="2.4000866"
- inkscape:cx="290.82284"
- inkscape:cy="82.862197"
- inkscape:window-x="1920"
- inkscape:window-y="30"
- inkscape:window-maximized="1"
- inkscape:current-layer="svg2" /><defs
- class="ClipPathGroup"
- id="defs4" /><defs
- id="defs9" /><defs
- id="defs82" /><defs
- id="defs105" /><defs
- class="TextShapeIndex"
- id="defs116" /><defs
- class="EmbeddedBulletChars"
- id="defs120" /><defs
- class="TextEmbeddedBitmaps"
- id="defs149" /><g
- class="com.sun.star.drawing.CustomShape"
- id="g186"
- transform="translate(-3285.889,-3185.889)"><g
- id="id6"><rect
- class="BoundingBox"
- x="3299"
- y="3199"
- width="1303"
- height="1203"
- id="rect189"
- style="fill:none;stroke:none" /><path
- d="m 3950,4400 -650,0 0,-1200 1300,0 0,1200 -650,0 z"
- id="path191"
- inkscape:connector-curvature="0"
- style="fill:#0000ff;stroke:none" /><path
- d="m 3950,4400 -650,0 0,-1200 1300,0 0,1200 -650,0 z"
- id="path193"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text195"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan197"
- style="font-weight:400;font-size:635px;font-family:'Liberation Sans', sans-serif"><tspan
- class="TextPosition"
- x="3739"
- y="4021"
- id="tspan199"><tspan
- id="tspan201"
- style="fill:#ffffff;stroke:none">B</tspan></tspan></tspan></text>
-</g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g203"
- transform="translate(-3285.889,-3185.889)"><g
- id="id7"><rect
- class="BoundingBox"
- x="4599"
- y="3199"
- width="1303"
- height="1203"
- id="rect206"
- style="fill:none;stroke:none" /><path
- d="m 5250,4400 -650,0 0,-1200 1300,0 0,1200 -650,0 z"
- id="path208"
- inkscape:connector-curvature="0"
- style="fill:#00cc00;stroke:none" /><path
- d="m 5250,4400 -650,0 0,-1200 1300,0 0,1200 -650,0 z"
- id="path210"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text212"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan214"
- style="font-weight:400;font-size:635px;font-family:'Liberation Sans', sans-serif"><tspan
- class="TextPosition"
- x="5003"
- y="4021"
- id="tspan216"><tspan
- id="tspan218"
- style="fill:#ffffff;stroke:none">G</tspan></tspan></tspan></text>
-</g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g220"
- transform="translate(-3285.889,-3185.889)"><g
- id="id8"><rect
- class="BoundingBox"
- x="3299"
- y="4399"
- width="1303"
- height="1203"
- id="rect223"
- style="fill:none;stroke:none" /><path
- d="m 3950,5600 -650,0 0,-1200 1300,0 0,1200 -650,0 z"
- id="path225"
- inkscape:connector-curvature="0"
- style="fill:#00cc00;stroke:none" /><path
- d="m 3950,5600 -650,0 0,-1200 1300,0 0,1200 -650,0 z"
- id="path227"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text229"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan231"
- style="font-weight:400;font-size:635px;font-family:'Liberation Sans', sans-serif"><tspan
- class="TextPosition"
- x="3703"
- y="5221"
- id="tspan233"><tspan
- id="tspan235"
- style="fill:#ffffff;stroke:none">G</tspan></tspan></tspan></text>
-</g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g237"
- transform="translate(-3285.889,-3185.889)"><g
- id="id9"><rect
- class="BoundingBox"
- x="4599"
- y="4399"
- width="1303"
- height="1203"
- id="rect240"
- style="fill:none;stroke:none" /><path
- d="m 5250,5600 -650,0 0,-1200 1300,0 0,1200 -650,0 z"
- id="path242"
- inkscape:connector-curvature="0"
- style="fill:#ff0000;stroke:none" /><path
- d="m 5250,5600 -650,0 0,-1200 1300,0 0,1200 -650,0 z"
- id="path244"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text246"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan248"
- style="font-weight:400;font-size:635px;font-family:'Liberation Sans', sans-serif"><tspan
- class="TextPosition"
- x="5022"
- y="5221"
- id="tspan250"><tspan
- id="tspan252"
- style="fill:#ffffff;stroke:none">R</tspan></tspan></tspan></text>
-</g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g254"
- transform="translate(-3285.889,-3185.889)"><g
- id="id10"><rect
- class="BoundingBox"
- x="5999"
- y="3299"
- width="1003"
- height="1003"
- id="rect257"
- style="fill:none;stroke:none" /><path
- d="m 6500,4300 -500,0 0,-1000 1000,0 0,1000 -500,0 z"
- id="path259"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#0000ff" /></g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g261"
- transform="translate(-3285.889,-3185.889)"><g
- id="id11"><rect
- class="BoundingBox"
- x="4699"
- y="5699"
- width="1003"
- height="1003"
- id="rect264"
- style="fill:none;stroke:none" /><path
- d="m 5200,6700 -500,0 0,-1000 1000,0 0,1000 -500,0 z"
- id="path266"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#00cc00" /></g></g><g
- class="com.sun.star.drawing.TextShape"
- id="g268"
- transform="translate(-3285.889,-3185.889)"><g
- id="id12"><rect
- class="BoundingBox"
- x="4000"
- y="6900"
- width="2374"
- height="963"
- id="rect271"
- style="fill:none;stroke:none" /><text
- class="TextShape"
- id="text273"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan275"
- style="font-weight:400;font-size:635px;font-family:'Liberation Sans', sans-serif"><tspan
- class="TextPosition"
- x="4250"
- y="7601"
- id="tspan277"><tspan
- id="tspan279"
- style="fill:#000000;stroke:none">BGGR</tspan></tspan></tspan></text>
-</g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g281"
- transform="translate(-3285.889,-3185.889)"><g
- id="id13"><rect
- class="BoundingBox"
- x="8799"
- y="3199"
- width="1303"
- height="1203"
- id="rect284"
- style="fill:none;stroke:none" /><path
- d="m 9450,4400 -650,0 0,-1200 1300,0 0,1200 -650,0 z"
- id="path286"
- inkscape:connector-curvature="0"
- style="fill:#0000ff;stroke:none" /><path
- d="m 9450,4400 -650,0 0,-1200 1300,0 0,1200 -650,0 z"
- id="path288"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text290"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan292"
- style="font-weight:400;font-size:635px;font-family:'Liberation Sans', sans-serif"><tspan
- class="TextPosition"
- x="9239"
- y="4021"
- id="tspan294"><tspan
- id="tspan296"
- style="fill:#ffffff;stroke:none">B</tspan></tspan></tspan></text>
-</g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g298"
- transform="translate(-3285.889,-3185.889)"><g
- id="id14"><rect
- class="BoundingBox"
- x="7499"
- y="3199"
- width="1303"
- height="1203"
- id="rect301"
- style="fill:none;stroke:none" /><path
- d="m 8150,4400 -650,0 0,-1200 1300,0 0,1200 -650,0 z"
- id="path303"
- inkscape:connector-curvature="0"
- style="fill:#00cc00;stroke:none" /><path
- d="m 8150,4400 -650,0 0,-1200 1300,0 0,1200 -650,0 z"
- id="path305"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text307"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan309"
- style="font-weight:400;font-size:635px;font-family:'Liberation Sans', sans-serif"><tspan
- class="TextPosition"
- x="7903"
- y="4021"
- id="tspan311"><tspan
- id="tspan313"
- style="fill:#ffffff;stroke:none">G</tspan></tspan></tspan></text>
-</g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g315"
- transform="translate(-3285.889,-3185.889)"><g
- id="id15"><rect
- class="BoundingBox"
- x="8799"
- y="4399"
- width="1303"
- height="1203"
- id="rect318"
- style="fill:none;stroke:none" /><path
- d="m 9450,5600 -650,0 0,-1200 1300,0 0,1200 -650,0 z"
- id="path320"
- inkscape:connector-curvature="0"
- style="fill:#00cc00;stroke:none" /><path
- d="m 9450,5600 -650,0 0,-1200 1300,0 0,1200 -650,0 z"
- id="path322"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text324"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan326"
- style="font-weight:400;font-size:635px;font-family:'Liberation Sans', sans-serif"><tspan
- class="TextPosition"
- x="9203"
- y="5221"
- id="tspan328"><tspan
- id="tspan330"
- style="fill:#ffffff;stroke:none">G</tspan></tspan></tspan></text>
-</g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g332"
- transform="translate(-3285.889,-3185.889)"><g
- id="id16"><rect
- class="BoundingBox"
- x="7499"
- y="4399"
- width="1303"
- height="1203"
- id="rect335"
- style="fill:none;stroke:none" /><path
- d="m 8150,5600 -650,0 0,-1200 1300,0 0,1200 -650,0 z"
- id="path337"
- inkscape:connector-curvature="0"
- style="fill:#ff0000;stroke:none" /><path
- d="m 8150,5600 -650,0 0,-1200 1300,0 0,1200 -650,0 z"
- id="path339"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text341"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan343"
- style="font-weight:400;font-size:635px;font-family:'Liberation Sans', sans-serif"><tspan
- class="TextPosition"
- x="7922"
- y="5221"
- id="tspan345"><tspan
- id="tspan347"
- style="fill:#ffffff;stroke:none">R</tspan></tspan></tspan></text>
-</g></g><g
- class="com.sun.star.drawing.TextShape"
- id="g349"
- transform="translate(-3285.889,-3185.889)"><g
- id="id17"><rect
- class="BoundingBox"
- x="8200"
- y="6900"
- width="2374"
- height="963"
- id="rect352"
- style="fill:none;stroke:none" /><text
- class="TextShape"
- id="text354"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan356"
- style="font-weight:400;font-size:635px;font-family:'Liberation Sans', sans-serif"><tspan
- class="TextPosition"
- x="8450"
- y="7601"
- id="tspan358"><tspan
- id="tspan360"
- style="fill:#000000;stroke:none">GBRG</tspan></tspan></tspan></text>
-</g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g362"
- transform="translate(-3285.889,-3185.889)"><g
- id="id18"><rect
- class="BoundingBox"
- x="17299"
- y="4399"
- width="1303"
- height="1203"
- id="rect365"
- style="fill:none;stroke:none" /><path
- d="m 17950,5600 -650,0 0,-1200 1300,0 0,1200 -650,0 z"
- id="path367"
- inkscape:connector-curvature="0"
- style="fill:#0000ff;stroke:none" /><path
- d="m 17950,5600 -650,0 0,-1200 1300,0 0,1200 -650,0 z"
- id="path369"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text371"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan373"
- style="font-weight:400;font-size:635px;font-family:'Liberation Sans', sans-serif"><tspan
- class="TextPosition"
- x="17739"
- y="5221"
- id="tspan375"><tspan
- id="tspan377"
- style="fill:#ffffff;stroke:none">B</tspan></tspan></tspan></text>
-</g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g379"
- transform="translate(-3285.889,-3185.889)"><g
- id="id19"><rect
- class="BoundingBox"
- x="17299"
- y="3199"
- width="1303"
- height="1203"
- id="rect382"
- style="fill:none;stroke:none" /><path
- d="m 17950,4400 -650,0 0,-1200 1300,0 0,1200 -650,0 z"
- id="path384"
- inkscape:connector-curvature="0"
- style="fill:#00cc00;stroke:none" /><path
- d="m 17950,4400 -650,0 0,-1200 1300,0 0,1200 -650,0 z"
- id="path386"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text388"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan390"
- style="font-weight:400;font-size:635px;font-family:'Liberation Sans', sans-serif"><tspan
- class="TextPosition"
- x="17703"
- y="4021"
- id="tspan392"><tspan
- id="tspan394"
- style="fill:#ffffff;stroke:none">G</tspan></tspan></tspan></text>
-</g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g396"
- transform="translate(-3285.889,-3185.889)"><g
- id="id20"><rect
- class="BoundingBox"
- x="15999"
- y="4399"
- width="1303"
- height="1203"
- id="rect399"
- style="fill:none;stroke:none" /><path
- d="m 16650,5600 -650,0 0,-1200 1300,0 0,1200 -650,0 z"
- id="path401"
- inkscape:connector-curvature="0"
- style="fill:#00cc00;stroke:none" /><path
- d="m 16650,5600 -650,0 0,-1200 1300,0 0,1200 -650,0 z"
- id="path403"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text405"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan407"
- style="font-weight:400;font-size:635px;font-family:'Liberation Sans', sans-serif"><tspan
- class="TextPosition"
- x="16403"
- y="5221"
- id="tspan409"><tspan
- id="tspan411"
- style="fill:#ffffff;stroke:none">G</tspan></tspan></tspan></text>
-</g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g413"
- transform="translate(-3285.889,-3185.889)"><g
- id="id21"><rect
- class="BoundingBox"
- x="15999"
- y="3199"
- width="1303"
- height="1203"
- id="rect416"
- style="fill:none;stroke:none" /><path
- d="m 16650,4400 -650,0 0,-1200 1300,0 0,1200 -650,0 z"
- id="path418"
- inkscape:connector-curvature="0"
- style="fill:#ff0000;stroke:none" /><path
- d="m 16650,4400 -650,0 0,-1200 1300,0 0,1200 -650,0 z"
- id="path420"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text422"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan424"
- style="font-weight:400;font-size:635px;font-family:'Liberation Sans', sans-serif"><tspan
- class="TextPosition"
- x="16422"
- y="4021"
- id="tspan426"><tspan
- id="tspan428"
- style="fill:#ffffff;stroke:none">R</tspan></tspan></tspan></text>
-</g></g><g
- class="com.sun.star.drawing.TextShape"
- id="g430"
- transform="translate(-3285.889,-3185.889)"><g
- id="id22"><rect
- class="BoundingBox"
- x="16700"
- y="6900"
- width="2374"
- height="963"
- id="rect433"
- style="fill:none;stroke:none" /><text
- class="TextShape"
- id="text435"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan437"
- style="font-weight:400;font-size:635px;font-family:'Liberation Sans', sans-serif"><tspan
- class="TextPosition"
- x="16950"
- y="7601"
- id="tspan439"><tspan
- id="tspan441"
- style="fill:#000000;stroke:none">RGGB</tspan></tspan></tspan></text>
-</g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g443"
- transform="translate(-3285.889,-3185.889)"><g
- id="id23"><rect
- class="BoundingBox"
- x="11699"
- y="4399"
- width="1303"
- height="1203"
- id="rect446"
- style="fill:none;stroke:none" /><path
- d="m 12350,5600 -650,0 0,-1200 1300,0 0,1200 -650,0 z"
- id="path448"
- inkscape:connector-curvature="0"
- style="fill:#0000ff;stroke:none" /><path
- d="m 12350,5600 -650,0 0,-1200 1300,0 0,1200 -650,0 z"
- id="path450"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text452"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan454"
- style="font-weight:400;font-size:635px;font-family:'Liberation Sans', sans-serif"><tspan
- class="TextPosition"
- x="12139"
- y="5221"
- id="tspan456"><tspan
- id="tspan458"
- style="fill:#ffffff;stroke:none">B</tspan></tspan></tspan></text>
-</g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g460"
- transform="translate(-3285.889,-3185.889)"><g
- id="id24"><rect
- class="BoundingBox"
- x="11699"
- y="3199"
- width="1303"
- height="1203"
- id="rect463"
- style="fill:none;stroke:none" /><path
- d="m 12350,4400 -650,0 0,-1200 1300,0 0,1200 -650,0 z"
- id="path465"
- inkscape:connector-curvature="0"
- style="fill:#00cc00;stroke:none" /><path
- d="m 12350,4400 -650,0 0,-1200 1300,0 0,1200 -650,0 z"
- id="path467"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text469"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan471"
- style="font-weight:400;font-size:635px;font-family:'Liberation Sans', sans-serif"><tspan
- class="TextPosition"
- x="12103"
- y="4021"
- id="tspan473"><tspan
- id="tspan475"
- style="fill:#ffffff;stroke:none">G</tspan></tspan></tspan></text>
-</g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g477"
- transform="translate(-3285.889,-3185.889)"><g
- id="id25"><rect
- class="BoundingBox"
- x="12999"
- y="4399"
- width="1303"
- height="1203"
- id="rect480"
- style="fill:none;stroke:none" /><path
- d="m 13650,5600 -650,0 0,-1200 1300,0 0,1200 -650,0 z"
- id="path482"
- inkscape:connector-curvature="0"
- style="fill:#00cc00;stroke:none" /><path
- d="m 13650,5600 -650,0 0,-1200 1300,0 0,1200 -650,0 z"
- id="path484"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text486"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan488"
- style="font-weight:400;font-size:635px;font-family:'Liberation Sans', sans-serif"><tspan
- class="TextPosition"
- x="13403"
- y="5221"
- id="tspan490"><tspan
- id="tspan492"
- style="fill:#ffffff;stroke:none">G</tspan></tspan></tspan></text>
-</g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g494"
- transform="translate(-3285.889,-3185.889)"><g
- id="id26"><rect
- class="BoundingBox"
- x="12999"
- y="3199"
- width="1303"
- height="1203"
- id="rect497"
- style="fill:none;stroke:none" /><path
- d="m 13650,4400 -650,0 0,-1200 1300,0 0,1200 -650,0 z"
- id="path499"
- inkscape:connector-curvature="0"
- style="fill:#ff0000;stroke:none" /><path
- d="m 13650,4400 -650,0 0,-1200 1300,0 0,1200 -650,0 z"
- id="path501"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text503"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan505"
- style="font-weight:400;font-size:635px;font-family:'Liberation Sans', sans-serif"><tspan
- class="TextPosition"
- x="13422"
- y="4021"
- id="tspan507"><tspan
- id="tspan509"
- style="fill:#ffffff;stroke:none">R</tspan></tspan></tspan></text>
-</g></g><g
- class="com.sun.star.drawing.TextShape"
- id="g511"
- transform="translate(-3285.889,-3185.889)"><g
- id="id27"><rect
- class="BoundingBox"
- x="12400"
- y="6900"
- width="2374"
- height="963"
- id="rect514"
- style="fill:none;stroke:none" /><text
- class="TextShape"
- id="text516"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan518"
- style="font-weight:400;font-size:635px;font-family:'Liberation Sans', sans-serif"><tspan
- class="TextPosition"
- x="12650"
- y="7601"
- id="tspan520"><tspan
- id="tspan522"
- style="fill:#000000;stroke:none">GRBG</tspan></tspan></tspan></text>
-</g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g524"
- transform="translate(-3285.889,-3185.889)"><g
- id="id28"><rect
- class="BoundingBox"
- x="5999"
- y="5699"
- width="1003"
- height="1003"
- id="rect527"
- style="fill:none;stroke:none" /><path
- d="m 6500,6700 -500,0 0,-1000 1000,0 0,1000 -500,0 z"
- id="path529"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#0000ff" /></g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g531"
- transform="translate(-3285.889,-3185.889)"><g
- id="id29"><rect
- class="BoundingBox"
- x="3399"
- y="5699"
- width="1003"
- height="1003"
- id="rect534"
- style="fill:none;stroke:none" /><path
- d="m 3900,6700 -500,0 0,-1000 1000,0 0,1000 -500,0 z"
- id="path536"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#0000ff" /></g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g538"
- transform="translate(-3285.889,-3185.889)"><g
- id="id30"><rect
- class="BoundingBox"
- x="5999"
- y="4499"
- width="1003"
- height="1003"
- id="rect541"
- style="fill:none;stroke:none" /><path
- d="m 6500,5500 -500,0 0,-1000 1000,0 0,1000 -500,0 z"
- id="path543"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#00cc00" /></g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g545"
- transform="translate(-3285.889,-3185.889)"><g
- id="id31"><rect
- class="BoundingBox"
- x="7599"
- y="5799"
- width="1003"
- height="1003"
- id="rect548"
- style="fill:none;stroke:none" /><path
- d="m 8100,6800 -500,0 0,-1000 1000,0 0,1000 -500,0 z"
- id="path550"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#00cc00" /></g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g552"
- transform="translate(-3285.889,-3185.889)"><g
- id="id32"><rect
- class="BoundingBox"
- x="10199"
- y="5799"
- width="1003"
- height="1003"
- id="rect555"
- style="fill:none;stroke:none" /><path
- d="m 10700,6800 -500,0 0,-1000 1000,0 0,1000 -500,0 z"
- id="path557"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#00cc00" /></g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g559"
- transform="translate(-3285.889,-3185.889)"><g
- id="id33"><rect
- class="BoundingBox"
- x="8899"
- y="5799"
- width="1003"
- height="1003"
- id="rect562"
- style="fill:none;stroke:none" /><path
- d="m 9400,6800 -500,0 0,-1000 1000,0 0,1000 -500,0 z"
- id="path564"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#0000ff" /></g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g566"
- transform="translate(-3285.889,-3185.889)"><g
- id="id34"><rect
- class="BoundingBox"
- x="10199"
- y="4499"
- width="1003"
- height="1003"
- id="rect569"
- style="fill:none;stroke:none" /><path
- d="m 10700,5500 -500,0 0,-1000 1000,0 0,1000 -500,0 z"
- id="path571"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff0000" /></g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g573"
- transform="translate(-3285.889,-3185.889)"><g
- id="id35"><rect
- class="BoundingBox"
- x="10199"
- y="3299"
- width="1003"
- height="1003"
- id="rect576"
- style="fill:none;stroke:none" /><path
- d="m 10700,4300 -500,0 0,-1000 1000,0 0,1000 -500,0 z"
- id="path578"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#00cc00" /></g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g580"
- transform="translate(-3285.889,-3185.889)"><g
- id="id36"><rect
- class="BoundingBox"
- x="14399"
- y="3299"
- width="1003"
- height="1003"
- id="rect583"
- style="fill:none;stroke:none" /><path
- d="m 14900,4300 -500,0 0,-1000 1000,0 0,1000 -500,0 z"
- id="path585"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#00cc00" /></g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g587"
- transform="translate(-3285.889,-3185.889)"><g
- id="id37"><rect
- class="BoundingBox"
- x="14399"
- y="5799"
- width="1003"
- height="1003"
- id="rect590"
- style="fill:none;stroke:none" /><path
- d="m 14900,6800 -500,0 0,-1000 1000,0 0,1000 -500,0 z"
- id="path592"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#00cc00" /></g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g594"
- transform="translate(-3285.889,-3185.889)"><g
- id="id38"><rect
- class="BoundingBox"
- x="11799"
- y="5799"
- width="1003"
- height="1003"
- id="rect597"
- style="fill:none;stroke:none" /><path
- d="m 12300,6800 -500,0 0,-1000 1000,0 0,1000 -500,0 z"
- id="path599"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#00cc00" /></g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g601"
- transform="translate(-3285.889,-3185.889)"><g
- id="id39"><rect
- class="BoundingBox"
- x="14399"
- y="4499"
- width="1003"
- height="1003"
- id="rect604"
- style="fill:none;stroke:none" /><path
- d="m 14900,5500 -500,0 0,-1000 1000,0 0,1000 -500,0 z"
- id="path606"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#0000ff" /></g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g608"
- transform="translate(-3285.889,-3185.889)"><g
- id="id40"><rect
- class="BoundingBox"
- x="13099"
- y="5799"
- width="1003"
- height="1003"
- id="rect611"
- style="fill:none;stroke:none" /><path
- d="m 13600,6800 -500,0 0,-1000 1000,0 0,1000 -500,0 z"
- id="path613"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff0000" /></g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g615"
- transform="translate(-3285.889,-3185.889)"><g
- id="id41"><rect
- class="BoundingBox"
- x="16099"
- y="5799"
- width="1003"
- height="1003"
- id="rect618"
- style="fill:none;stroke:none" /><path
- d="m 16600,6800 -500,0 0,-1000 1000,0 0,1000 -500,0 z"
- id="path620"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff0000" /></g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g622"
- transform="translate(-3398.7778,-3185.889)"><g
- id="id42"><rect
- class="BoundingBox"
- x="18799"
- y="5799"
- width="1003"
- height="1003"
- id="rect625"
- style="fill:none;stroke:none" /><path
- d="m 19300,6800 -500,0 0,-1000 1000,0 0,1000 -500,0 z"
- id="path627"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff0000" /></g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g629"
- transform="translate(-3398.7778,-3185.889)"><g
- id="id43"><rect
- class="BoundingBox"
- x="18799"
- y="3299"
- width="1003"
- height="1003"
- id="rect632"
- style="fill:none;stroke:none" /><path
- d="m 19300,4300 -500,0 0,-1000 1000,0 0,1000 -500,0 z"
- id="path634"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff0000" /></g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g636"
- transform="translate(-3285.889,-3185.889)"><g
- id="id44"><rect
- class="BoundingBox"
- x="17399"
- y="5799"
- width="1003"
- height="1003"
- id="rect639"
- style="fill:none;stroke:none" /><path
- d="m 17900,6800 -500,0 0,-1000 1000,0 0,1000 -500,0 z"
- id="path641"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#00cc00" /></g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g643"
- transform="translate(-3398.7778,-3185.889)"><g
- id="id45"><rect
- class="BoundingBox"
- x="18799"
- y="4499"
- width="1003"
- height="1003"
- id="rect646"
- style="fill:none;stroke:none" /><path
- d="m 19300,5500 -500,0 0,-1000 1000,0 0,1000 -500,0 z"
- id="path648"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#00cc00" /></g></g></svg>
\ No newline at end of file
+<?xml version="1.0" encoding="UTF-8"?>
+<svg id="svg2" width="164.15mm" height="46.771mm" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" preserveAspectRatio="xMidYMid" version="1.2" viewBox="0 0 16415.333 4677.1107" xml:space="preserve" xmlns="http://www.w3.org/2000/svg" xmlns:cc="http://creativecommons.org/ns#" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"><metadata id="metadata652"><rdf:RDF><cc:Work rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/><dc:title/></cc:Work></rdf:RDF></metadata><g id="g186" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id6"><rect id="rect189" class="BoundingBox" x="3299" y="3199" width="1303" height="1203" fill="none"/><path id="path191" d="m3950 4400h-650v-1200h1300v1200h-650z" fill="#00f"/><path id="path193" d="m3950
+4400h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text195" class="TextShape"><tspan id="tspan197" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan199" class="TextPosition" x="3739" y="4021"><tspan id="tspan201" fill="#ffffff">B</tspan></tspan></tspan></text>
+</g></g><g id="g203" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id7"><rect id="rect206" class="BoundingBox" x="4599" y="3199" width="1303" height="1203" fill="none"/><path id="path208" d="m5250 4400h-650v-1200h1300v1200h-650z" fill="#0c0"/><path id="path210" d="m5250 4400h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text212" class="TextShape"><tspan id="tspan214" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan216" class="TextPosition" x="5003" y="4021"><tspan id="tspan218" fill="#ffffff">G</tspan></tspan></tspan></text>
+</g></g><g id="g220" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id8"><rect id="rect223" class="BoundingBox" x="3299" y="4399" width="1303" height="1203" fill="none"/><path id="path225" d="m3950 5600h-650v-1200h1300v1200h-650z" fill="#0c0"/><path id="path227" d="m3950 5600h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text229" class="TextShape"><tspan id="tspan231" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan233" class="TextPosition" x="3703" y="5221"><tspan id="tspan235" fill="#ffffff">G</tspan></tspan></tspan></text>
+</g></g><g id="g237" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id9"><rect id="rect240" class="BoundingBox" x="4599" y="4399" width="1303" height="1203" fill="none"/><path id="path242" d="m5250 5600h-650v-1200h1300v1200h-650z" fill="#f00"/><path id="path244" d="m5250 5600h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text246" class="TextShape"><tspan id="tspan248" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan250" class="TextPosition" x="5022" y="5221"><tspan id="tspan252" fill="#ffffff">R</tspan></tspan></tspan></text>
+</g></g><g id="g254" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id10" fill="none"><rect id="rect257" class="BoundingBox" x="5999" y="3299" width="1003" height="1003"/><path id="path259" d="m6500 4300h-500v-1e3h1e3v1e3h-500z" stroke="#00f"/></g></g><g id="g261" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id11" fill="none"><rect id="rect264" class="BoundingBox" x="4699" y="5699" width="1003" height="1003"/><path id="path266" d="m5200 6700h-500v-1e3h1e3v1e3h-500z" stroke="#0c0"/></g></g><g id="g268" class="com.sun.star.drawing.TextShape" transform="translate(-3285.9 -3185.9)"><g id="id12"><rect id="rect271" class="BoundingBox" x="4e3" y="6900" width="2374" height="963" fill="none"/><text id="text273" class="TextShape"><tspan id="tspan275" class="TextParagraph" font-family="sans-serif" font-size="635px"
+font-weight="400"><tspan id="tspan277" class="TextPosition" x="4250" y="7601"><tspan id="tspan279" fill="#000000">BGGR</tspan></tspan></tspan></text>
+</g></g><g id="g281" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id13"><rect id="rect284" class="BoundingBox" x="8799" y="3199" width="1303" height="1203" fill="none"/><path id="path286" d="m9450 4400h-650v-1200h1300v1200h-650z" fill="#00f"/><path id="path288" d="m9450 4400h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text290" class="TextShape"><tspan id="tspan292" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan294" class="TextPosition" x="9239" y="4021"><tspan id="tspan296" fill="#ffffff">B</tspan></tspan></tspan></text>
+</g></g><g id="g298" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id14"><rect id="rect301" class="BoundingBox" x="7499" y="3199" width="1303" height="1203" fill="none"/><path id="path303" d="m8150 4400h-650v-1200h1300v1200h-650z" fill="#0c0"/><path id="path305" d="m8150 4400h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text307" class="TextShape"><tspan id="tspan309" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan311" class="TextPosition" x="7903" y="4021"><tspan id="tspan313" fill="#ffffff">G</tspan></tspan></tspan></text>
+</g></g><g id="g315" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id15"><rect id="rect318" class="BoundingBox" x="8799" y="4399" width="1303" height="1203" fill="none"/><path id="path320" d="m9450 5600h-650v-1200h1300v1200h-650z" fill="#0c0"/><path id="path322" d="m9450 5600h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text324" class="TextShape"><tspan id="tspan326" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan328" class="TextPosition" x="9203" y="5221"><tspan id="tspan330" fill="#ffffff">G</tspan></tspan></tspan></text>
+</g></g><g id="g332" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id16"><rect id="rect335" class="BoundingBox" x="7499" y="4399" width="1303" height="1203" fill="none"/><path id="path337" d="m8150 5600h-650v-1200h1300v1200h-650z" fill="#f00"/><path id="path339" d="m8150 5600h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text341" class="TextShape"><tspan id="tspan343" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan345" class="TextPosition" x="7922" y="5221"><tspan id="tspan347" fill="#ffffff">R</tspan></tspan></tspan></text>
+</g></g><g id="g349" class="com.sun.star.drawing.TextShape" transform="translate(-3285.9 -3185.9)"><g id="id17"><rect id="rect352" class="BoundingBox" x="8200" y="6900" width="2374" height="963" fill="none"/><text id="text354" class="TextShape"><tspan id="tspan356" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan358" class="TextPosition" x="8450" y="7601"><tspan id="tspan360" fill="#000000">GBRG</tspan></tspan></tspan></text>
+</g></g><g id="g362" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id18"><rect id="rect365" class="BoundingBox" x="17299" y="4399" width="1303" height="1203" fill="none"/><path id="path367" d="m17950 5600h-650v-1200h1300v1200h-650z" fill="#00f"/><path id="path369" d="m17950 5600h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text371" class="TextShape"><tspan id="tspan373" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan375" class="TextPosition" x="17739" y="5221"><tspan id="tspan377" fill="#ffffff">B</tspan></tspan></tspan></text>
+</g></g><g id="g379" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id19"><rect id="rect382" class="BoundingBox" x="17299" y="3199" width="1303" height="1203" fill="none"/><path id="path384" d="m17950 4400h-650v-1200h1300v1200h-650z" fill="#0c0"/><path id="path386" d="m17950 4400h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text388" class="TextShape"><tspan id="tspan390" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan392" class="TextPosition" x="17703" y="4021"><tspan id="tspan394" fill="#ffffff">G</tspan></tspan></tspan></text>
+</g></g><g id="g396" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id20"><rect id="rect399" class="BoundingBox" x="15999" y="4399" width="1303" height="1203" fill="none"/><path id="path401" d="m16650 5600h-650v-1200h1300v1200h-650z" fill="#0c0"/><path id="path403" d="m16650 5600h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text405" class="TextShape"><tspan id="tspan407" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan409" class="TextPosition" x="16403" y="5221"><tspan id="tspan411" fill="#ffffff">G</tspan></tspan></tspan></text>
+</g></g><g id="g413" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id21"><rect id="rect416" class="BoundingBox" x="15999" y="3199" width="1303" height="1203" fill="none"/><path id="path418" d="m16650 4400h-650v-1200h1300v1200h-650z" fill="#f00"/><path id="path420" d="m16650 4400h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text422" class="TextShape"><tspan id="tspan424" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan426" class="TextPosition" x="16422" y="4021"><tspan id="tspan428" fill="#ffffff">R</tspan></tspan></tspan></text>
+</g></g><g id="g430" class="com.sun.star.drawing.TextShape" transform="translate(-3285.9 -3185.9)"><g id="id22"><rect id="rect433" class="BoundingBox" x="16700" y="6900" width="2374" height="963" fill="none"/><text id="text435" class="TextShape"><tspan id="tspan437" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan439" class="TextPosition" x="16950" y="7601"><tspan id="tspan441" fill="#000000">RGGB</tspan></tspan></tspan></text>
+</g></g><g id="g443" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id23"><rect id="rect446" class="BoundingBox" x="11699" y="4399" width="1303" height="1203" fill="none"/><path id="path448" d="m12350 5600h-650v-1200h1300v1200h-650z" fill="#00f"/><path id="path450" d="m12350 5600h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text452" class="TextShape"><tspan id="tspan454" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan456" class="TextPosition" x="12139" y="5221"><tspan id="tspan458" fill="#ffffff">B</tspan></tspan></tspan></text>
+</g></g><g id="g460" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id24"><rect id="rect463" class="BoundingBox" x="11699" y="3199" width="1303" height="1203" fill="none"/><path id="path465" d="m12350 4400h-650v-1200h1300v1200h-650z" fill="#0c0"/><path id="path467" d="m12350 4400h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text469" class="TextShape"><tspan id="tspan471" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan473" class="TextPosition" x="12103" y="4021"><tspan id="tspan475" fill="#ffffff">G</tspan></tspan></tspan></text>
+</g></g><g id="g477" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id25"><rect id="rect480" class="BoundingBox" x="12999" y="4399" width="1303" height="1203" fill="none"/><path id="path482" d="m13650 5600h-650v-1200h1300v1200h-650z" fill="#0c0"/><path id="path484" d="m13650 5600h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text486" class="TextShape"><tspan id="tspan488" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan490" class="TextPosition" x="13403" y="5221"><tspan id="tspan492" fill="#ffffff">G</tspan></tspan></tspan></text>
+</g></g><g id="g494" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id26"><rect id="rect497" class="BoundingBox" x="12999" y="3199" width="1303" height="1203" fill="none"/><path id="path499" d="m13650 4400h-650v-1200h1300v1200h-650z" fill="#f00"/><path id="path501" d="m13650 4400h-650v-1200h1300v1200h-650z" fill="none" stroke="#3465a4"/><text id="text503" class="TextShape"><tspan id="tspan505" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan507" class="TextPosition" x="13422" y="4021"><tspan id="tspan509" fill="#ffffff">R</tspan></tspan></tspan></text>
+</g></g><g id="g511" class="com.sun.star.drawing.TextShape" transform="translate(-3285.9 -3185.9)"><g id="id27"><rect id="rect514" class="BoundingBox" x="12400" y="6900" width="2374" height="963" fill="none"/><text id="text516" class="TextShape"><tspan id="tspan518" class="TextParagraph" font-family="sans-serif" font-size="635px" font-weight="400"><tspan id="tspan520" class="TextPosition" x="12650" y="7601"><tspan id="tspan522" fill="#000000">GRBG</tspan></tspan></tspan></text>
+</g></g><g id="g524" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id28" fill="none"><rect id="rect527" class="BoundingBox" x="5999" y="5699" width="1003" height="1003"/><path id="path529" d="m6500 6700h-500v-1e3h1e3v1e3h-500z" stroke="#00f"/></g></g><g id="g531" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id29" fill="none"><rect id="rect534" class="BoundingBox" x="3399" y="5699" width="1003" height="1003"/><path id="path536" d="m3900 6700h-500v-1e3h1e3v1e3h-500z" stroke="#00f"/></g></g><g id="g538" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id30" fill="none"><rect id="rect541" class="BoundingBox" x="5999" y="4499" width="1003" height="1003"/><path id="path543" d="m6500 5500h-500v-1e3h1e3v1e3h-500z" stroke="#0c0"/></g></g><g id="g545"
+class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id31" fill="none"><rect id="rect548" class="BoundingBox" x="7599" y="5799" width="1003" height="1003"/><path id="path550" d="m8100 6800h-500v-1e3h1e3v1e3h-500z" stroke="#0c0"/></g></g><g id="g552" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id32" fill="none"><rect id="rect555" class="BoundingBox" x="10199" y="5799" width="1003" height="1003"/><path id="path557" d="m10700 6800h-500v-1e3h1e3v1e3h-500z" stroke="#0c0"/></g></g><g id="g559" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id33" fill="none"><rect id="rect562" class="BoundingBox" x="8899" y="5799" width="1003" height="1003"/><path id="path564" d="m9400 6800h-500v-1e3h1e3v1e3h-500z" stroke="#00f"/></g></g><g id="g566" class="com.sun.star.drawing.CustomShape"
+transform="translate(-3285.9 -3185.9)"><g id="id34" fill="none"><rect id="rect569" class="BoundingBox" x="10199" y="4499" width="1003" height="1003"/><path id="path571" d="m10700 5500h-500v-1e3h1e3v1e3h-500z" stroke="#f00"/></g></g><g id="g573" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id35" fill="none"><rect id="rect576" class="BoundingBox" x="10199" y="3299" width="1003" height="1003"/><path id="path578" d="m10700 4300h-500v-1e3h1e3v1e3h-500z" stroke="#0c0"/></g></g><g id="g580" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id36" fill="none"><rect id="rect583" class="BoundingBox" x="14399" y="3299" width="1003" height="1003"/><path id="path585" d="m14900 4300h-500v-1e3h1e3v1e3h-500z" stroke="#0c0"/></g></g><g id="g587" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g
+id="id37" fill="none"><rect id="rect590" class="BoundingBox" x="14399" y="5799" width="1003" height="1003"/><path id="path592" d="m14900 6800h-500v-1e3h1e3v1e3h-500z" stroke="#0c0"/></g></g><g id="g594" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id38" fill="none"><rect id="rect597" class="BoundingBox" x="11799" y="5799" width="1003" height="1003"/><path id="path599" d="m12300 6800h-500v-1e3h1e3v1e3h-500z" stroke="#0c0"/></g></g><g id="g601" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id39" fill="none"><rect id="rect604" class="BoundingBox" x="14399" y="4499" width="1003" height="1003"/><path id="path606" d="m14900 5500h-500v-1e3h1e3v1e3h-500z" stroke="#00f"/></g></g><g id="g608" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id40" fill="none"><rect id="rect611"
+class="BoundingBox" x="13099" y="5799" width="1003" height="1003"/><path id="path613" d="m13600 6800h-500v-1e3h1e3v1e3h-500z" stroke="#f00"/></g></g><g id="g615" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id41" fill="none"><rect id="rect618" class="BoundingBox" x="16099" y="5799" width="1003" height="1003"/><path id="path620" d="m16600 6800h-500v-1e3h1e3v1e3h-500z" stroke="#f00"/></g></g><g id="g622" class="com.sun.star.drawing.CustomShape" transform="translate(-3398.8 -3185.9)"><g id="id42" fill="none"><rect id="rect625" class="BoundingBox" x="18799" y="5799" width="1003" height="1003"/><path id="path627" d="m19300 6800h-500v-1e3h1e3v1e3h-500z" stroke="#f00"/></g></g><g id="g629" class="com.sun.star.drawing.CustomShape" transform="translate(-3398.8 -3185.9)"><g id="id43" fill="none"><rect id="rect632" class="BoundingBox" x="18799" y="3299"
+width="1003" height="1003"/><path id="path634" d="m19300 4300h-500v-1e3h1e3v1e3h-500z" stroke="#f00"/></g></g><g id="g636" class="com.sun.star.drawing.CustomShape" transform="translate(-3285.9 -3185.9)"><g id="id44" fill="none"><rect id="rect639" class="BoundingBox" x="17399" y="5799" width="1003" height="1003"/><path id="path641" d="m17900 6800h-500v-1e3h1e3v1e3h-500z" stroke="#0c0"/></g></g><g id="g643" class="com.sun.star.drawing.CustomShape" transform="translate(-3398.8 -3185.9)"><g id="id45" fill="none"><rect id="rect646" class="BoundingBox" x="18799" y="4499" width="1003" height="1003"/><path id="path648" d="m19300 5500h-500v-1e3h1e3v1e3h-500z" stroke="#0c0"/></g></g></svg>
diff --git a/Documentation/media/uapi/v4l/constraints.svg b/Documentation/media/uapi/v4l/constraints.svg
index f710ee4..7e5d718 100644
--- a/Documentation/media/uapi/v4l/constraints.svg
+++ b/Documentation/media/uapi/v4l/constraints.svg
@@ -1,346 +1,10 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<svg
- xmlns:dc="http://purl.org/dc/elements/1.1/"
- xmlns:cc="http://creativecommons.org/ns#"
- xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
- xmlns:svg="http://www.w3.org/2000/svg"
- xmlns="http://www.w3.org/2000/svg"
- xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
- xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
- version="1.2"
- width="249.00998mm"
- height="143.00999mm"
- viewBox="0 0 24900.998 14300.999"
- preserveAspectRatio="xMidYMid"
- xml:space="preserve"
- id="svg2"
- inkscape:version="0.91 r13725"
- sodipodi:docname="constraints.svg"
- style="fill-rule:evenodd;stroke-width:28.22200012;stroke-linejoin:round"><metadata
- id="metadata325"><rdf:RDF><cc:Work
- rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
- rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title /></cc:Work></rdf:RDF></metadata><sodipodi:namedview
- pagecolor="#ffffff"
- bordercolor="#666666"
- borderopacity="1"
- objecttolerance="10"
- gridtolerance="10"
- guidetolerance="10"
- inkscape:pageopacity="0"
- inkscape:pageshadow="2"
- inkscape:window-width="1920"
- inkscape:window-height="997"
- id="namedview323"
- showgrid="false"
- inkscape:zoom="1.0818519"
- inkscape:cx="270.29272"
- inkscape:cy="249.83854"
- inkscape:window-x="1920"
- inkscape:window-y="30"
- inkscape:window-maximized="1"
- inkscape:current-layer="svg2"
- fit-margin-top="0"
- fit-margin-left="0"
- fit-margin-right="0"
- fit-margin-bottom="0" /><defs
- class="ClipPathGroup"
- id="defs4"><marker
- inkscape:isstock="true"
- style="overflow:visible"
- id="marker6261"
- refX="0"
- refY="0"
- orient="auto"
- inkscape:stockid="Arrow1Mend"><path
- transform="matrix(-0.4,0,0,-0.4,-4,0)"
- style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:1pt;stroke-opacity:1"
- d="M 0,0 5,-5 -12.5,0 5,5 0,0 Z"
- id="path6263"
- inkscape:connector-curvature="0" /></marker><marker
- inkscape:stockid="Arrow1Mend"
- orient="auto"
- refY="0"
- refX="0"
- id="marker6125"
- style="overflow:visible"
- inkscape:isstock="true"
- inkscape:collect="always"><path
- id="path6127"
- d="M 0,0 5,-5 -12.5,0 5,5 0,0 Z"
- style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:1pt;stroke-opacity:1"
- transform="matrix(-0.4,0,0,-0.4,-4,0)"
- inkscape:connector-curvature="0" /></marker><marker
- inkscape:isstock="true"
- style="overflow:visible"
- id="marker6001"
- refX="0"
- refY="0"
- orient="auto"
- inkscape:stockid="Arrow1Mend"
- inkscape:collect="always"><path
- transform="matrix(-0.4,0,0,-0.4,-4,0)"
- style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:1pt;stroke-opacity:1"
- d="M 0,0 5,-5 -12.5,0 5,5 0,0 Z"
- id="path6003"
- inkscape:connector-curvature="0" /></marker><marker
- inkscape:stockid="Arrow1Mend"
- orient="auto"
- refY="0"
- refX="0"
- id="marker5693"
- style="overflow:visible"
- inkscape:isstock="true"
- inkscape:collect="always"><path
- id="path5695"
- d="M 0,0 5,-5 -12.5,0 5,5 0,0 Z"
- style="fill:#ff0000;fill-opacity:1;fill-rule:evenodd;stroke:#ff0000;stroke-width:1pt;stroke-opacity:1"
- transform="matrix(-0.4,0,0,-0.4,-4,0)"
- inkscape:connector-curvature="0" /></marker><marker
- inkscape:isstock="true"
- style="overflow:visible"
- id="marker5575"
- refX="0"
- refY="0"
- orient="auto"
- inkscape:stockid="Arrow1Mend"
- inkscape:collect="always"><path
- transform="matrix(-0.4,0,0,-0.4,-4,0)"
- style="fill:#000080;fill-opacity:1;fill-rule:evenodd;stroke:#000080;stroke-width:1pt;stroke-opacity:1"
- d="M 0,0 5,-5 -12.5,0 5,5 0,0 Z"
- id="path5577"
- inkscape:connector-curvature="0" /></marker><marker
- inkscape:stockid="Arrow1Mend"
- orient="auto"
- refY="0"
- refX="0"
- id="marker5469"
- style="overflow:visible"
- inkscape:isstock="true"
- inkscape:collect="always"><path
- id="path5471"
- d="M 0,0 5,-5 -12.5,0 5,5 0,0 Z"
- style="fill:#000080;fill-opacity:1;fill-rule:evenodd;stroke:#000080;stroke-width:1pt;stroke-opacity:1"
- transform="matrix(-0.4,0,0,-0.4,-4,0)"
- inkscape:connector-curvature="0" /></marker><marker
- inkscape:stockid="Arrow1Mend"
- orient="auto"
- refY="0"
- refX="0"
- id="marker5259"
- style="overflow:visible"
- inkscape:isstock="true"><path
- id="path5261"
- d="M 0,0 5,-5 -12.5,0 5,5 0,0 Z"
- style="fill:#000080;fill-opacity:1;fill-rule:evenodd;stroke:#000080;stroke-width:1pt;stroke-opacity:1"
- transform="matrix(-0.4,0,0,-0.4,-4,0)"
- inkscape:connector-curvature="0" /></marker><marker
- inkscape:stockid="Arrow2Mend"
- orient="auto"
- refY="0"
- refX="0"
- id="Arrow2Mend"
- style="overflow:visible"
- inkscape:isstock="true"><path
- id="path4241"
- style="fill:#000080;fill-opacity:1;fill-rule:evenodd;stroke:#000080;stroke-width:0.625;stroke-linejoin:round;stroke-opacity:1"
- d="M 8.7185878,4.0337352 -2.2072895,0.01601326 8.7185884,-4.0017078 c -1.7454984,2.3720609 -1.7354408,5.6174519 -6e-7,8.035443 z"
- transform="scale(-0.6,-0.6)"
- inkscape:connector-curvature="0" /></marker></defs><defs
- id="defs9" /><defs
- id="defs100" /><defs
- id="defs123" /><defs
- class="TextShapeIndex"
- id="defs134" /><defs
- class="EmbeddedBulletChars"
- id="defs138" /><defs
- class="TextEmbeddedBitmaps"
- id="defs167" /><g
- class="com.sun.star.drawing.CustomShape"
- id="g204"
- transform="translate(-1350,-3250)"><g
- id="id6"><rect
- class="BoundingBox"
- x="1350"
- y="3250"
- width="24901"
- height="14301"
- id="rect207"
- style="fill:none;stroke:none" /><path
- d="m 13800,17500 -12400,0 0,-14200 24800,0 0,14200 -12400,0 z"
- id="path209"
- inkscape:connector-curvature="0"
- style="fill:#ffffff;stroke:none" /><path
- d="m 13800,17500 -12400,0 0,-14200 24800,0 0,14200 -12400,0 z"
- id="path211"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff0000;stroke-width:100;stroke-linejoin:round" /><text
- class="TextShape"
- id="text213"><tspan
- class="TextParagraph"
- font-size="846px"
- font-weight="400"
- id="tspan215"
- style="font-weight:400;font-size:846px;font-family:'Liberation Sans', sans-serif"><tspan
- class="TextPosition"
- x="1652"
- y="17093"
- id="tspan217"><tspan
- id="tspan219"
- style="fill:#ff0000;stroke:none" /><tspan
- id="tspan221"
- style="fill:#ff0000;stroke:none">V4L2_SEL_FLAG_GE</tspan></tspan></tspan></text>
-</g></g><rect
- class="BoundingBox"
- x="3000"
- y="2200"
- width="18101"
- height="10101"
- id="rect226"
- style="fill:none;stroke:none" /><path
- d="m 12050,12250 -9000,0 0,-10000 18000,0 0,10000 -9000,0 z"
- id="path228"
- inkscape:connector-curvature="0"
- style="fill:#ffffff;stroke:none" /><path
- d="m 12050,12250 -9000,0 0,-10000 18000,0 0,10000 -9000,0 z"
- id="path230"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000000;stroke-width:100;stroke-linejoin:round" /><text
- class="TextShape"
- id="text232"
- x="-1350"
- y="-3250"><tspan
- class="TextParagraph"
- font-size="987px"
- font-weight="400"
- id="tspan234"
- style="font-weight:400;font-size:987px;font-family:'Liberation Sans', sans-serif"><tspan
- class="TextPosition"
- x="3227"
- y="11503"
- id="tspan236"><tspan
- id="tspan238"
- style="fill:#000000;stroke:none" /><tspan
- id="tspan240"
- style="fill:#000000;stroke:none">ORIGINAL</tspan></tspan></tspan></text>
-<g
- class="com.sun.star.drawing.CustomShape"
- id="g242"
- transform="translate(-1350,-3250)"><g
- id="id8"><rect
- class="BoundingBox"
- x="7050"
- y="7950"
- width="7901"
- height="5501"
- id="rect245"
- style="fill:none;stroke:none" /><path
- d="m 11000,13400 -3900,0 0,-5400 7800,0 0,5400 -3900,0 z"
- id="path247"
- inkscape:connector-curvature="0"
- style="fill:#ffffff;stroke:none" /><path
- d="m 11000,13400 -3900,0 0,-5400 7800,0 0,5400 -3900,0 z"
- id="path249"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4;stroke-width:100;stroke-linejoin:round" /><text
- class="TextShape"
- id="text251"><tspan
- class="TextParagraph"
- font-size="776px"
- font-weight="400"
- id="tspan253"
- style="font-weight:400;font-size:776px;font-family:'Liberation Sans', sans-serif"><tspan
- class="TextPosition"
- x="7228"
- y="10969"
- id="tspan255"><tspan
- id="tspan257"
- style="fill:#000080;stroke:none">V4L2_SEL_FLAG_LE</tspan></tspan></tspan></text>
-</g></g><rect
- class="BoundingBox"
- x="13700"
- y="7100"
- width="7101"
- height="101"
- id="rect262"
- style="fill:none;stroke:none" /><path
- d="m 20750,7150 -7000,0"
- id="path264"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000080;stroke-width:99.99134064;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;marker-end:url(#Arrow2Mend)" /><rect
- class="BoundingBox"
- x="3400"
- y="7100"
- width="2101"
- height="101"
- id="rect269"
- style="fill:none;stroke:none" /><path
- d="m 3450,7150 2000,0"
- id="path271"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000080;stroke-width:100;stroke-linejoin:round;marker-end:url(#marker5575)" /><rect
- class="BoundingBox"
- x="9800"
- y="2900"
- width="101"
- height="1501"
- id="rect276"
- style="fill:none;stroke:none" /><path
- d="m 9850,2950 0,1400"
- id="path278"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000080;stroke-width:100;stroke-linejoin:round;marker-end:url(#marker5259)" /><rect
- class="BoundingBox"
- x="9600"
- y="10600"
- width="101"
- height="1301"
- id="rect283"
- style="fill:none;stroke:none" /><path
- d="m 9650,11850 0,-1200"
- id="path285"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#000080;stroke-width:100;stroke-linejoin:round;marker-end:url(#marker5469)" /><rect
- class="BoundingBox"
- x="450"
- y="6850"
- width="2051"
- height="601"
- id="rect290"
- style="fill:none;stroke:none" /><path
- d="m 2450,7150 -2000.8696,0"
- id="path292"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff0000;stroke-width:132.48202515;stroke-linejoin:round;marker-end:url(#marker6125)" /><rect
- class="BoundingBox"
- x="21600"
- y="6750"
- width="2651"
- height="601"
- id="rect299"
- style="fill:none;stroke:none" /><path
- d="m 21650,7050 2522.609,0"
- id="path301"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff0000;stroke-width:120.40660858;stroke-linejoin:round;marker-end:url(#marker6001)" /><rect
- class="BoundingBox"
- x="9550"
- y="550"
- width="601"
- height="1451"
- id="rect308"
- style="fill:none;stroke:none" /><path
- d="m 9836.957,1950 0,-1453.0435"
- id="path310"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff0000;stroke-width:164.03721619;stroke-linejoin:round;marker-end:url(#marker6261)" /><rect
- class="BoundingBox"
- x="9350"
- y="12500"
- width="601"
- height="1451"
- id="rect317"
- style="fill:none;stroke:none" /><path
- d="m 9650,12550 0,1505.217"
- id="path319"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff0000;stroke-width:166.95626831;stroke-linejoin:round;marker-end:url(#marker5693)" /></svg>
\ No newline at end of file
+<?xml version="1.0" encoding="UTF-8"?>
+<svg id="svg2" width="249.01mm" height="143.01mm" fill-rule="evenodd" stroke-linejoin="round" stroke-width="28.222" preserveAspectRatio="xMidYMid" version="1.2" viewBox="0 0 24900.998 14300.999" xml:space="preserve" xmlns="http://www.w3.org/2000/svg" xmlns:cc="http://creativecommons.org/ns#" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"><metadata id="metadata325"><rdf:RDF><cc:Work rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/><dc:title/></cc:Work></rdf:RDF></metadata><defs id="defs4" class="ClipPathGroup"><marker id="marker6261" overflow="visible" orient="auto"><path id="path6263" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#f00" fill-rule="evenodd" stroke="#f00" stroke-width="1pt"/></marker><marker id="marker6125" overflow="visible"
+orient="auto"><path id="path6127" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#f00" fill-rule="evenodd" stroke="#f00" stroke-width="1pt"/></marker><marker id="marker6001" overflow="visible" orient="auto"><path id="path6003" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#f00" fill-rule="evenodd" stroke="#f00" stroke-width="1pt"/></marker><marker id="marker5693" overflow="visible" orient="auto"><path id="path5695" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#f00" fill-rule="evenodd" stroke="#f00" stroke-width="1pt"/></marker><marker id="marker5575" overflow="visible" orient="auto"><path id="path5577" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#000080" fill-rule="evenodd" stroke="#000080" stroke-width="1pt"/></marker><marker id="marker5469" overflow="visible"
+orient="auto"><path id="path5471" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#000080" fill-rule="evenodd" stroke="#000080" stroke-width="1pt"/></marker><marker id="marker5259" overflow="visible" orient="auto"><path id="path5261" transform="matrix(-.4 0 0 -.4 -4 0)" d="m0 0 5-5-17.5 5 17.5 5-5-5z" fill="#000080" fill-rule="evenodd" stroke="#000080" stroke-width="1pt"/></marker><marker id="Arrow2Mend" overflow="visible" orient="auto"><path id="path4241" transform="scale(-.6)" d="m8.7186 4.0337-10.926-4.0177 10.926-4.0177c-1.7455 2.3721-1.7354 5.6175-6e-7 8.0354z" fill="#000080" fill-rule="evenodd" stroke="#000080" stroke-linejoin="round" stroke-width=".625"/></marker></defs><g id="g204" class="com.sun.star.drawing.CustomShape" transform="translate(-1350,-3250)"><g id="id6"><rect id="rect207" class="BoundingBox" x="1350" y="3250" width="24901" height="14301"
+fill="none"/><path id="path209" d="m13800 17500h-12400v-14200h24800v14200h-12400z" fill="#fff"/><path id="path211" d="m13800 17500h-12400v-14200h24800v14200h-12400z" fill="none" stroke="#f00" stroke-linejoin="round" stroke-width="100"/><text id="text213" class="TextShape"><tspan id="tspan215" class="TextParagraph" font-family="sans-serif" font-size="846px" font-weight="400"><tspan id="tspan217" class="TextPosition" x="1652" y="17093" fill="#ff0000"><tspan id="tspan219"/><tspan id="tspan221">V4L2_SEL_FLAG_GE</tspan></tspan></tspan></text>
+</g></g><rect id="rect226" class="BoundingBox" x="3e3" y="2200" width="18101" height="10101" fill="none"/><path id="path228" d="m12050 12250h-9e3v-1e4h18000v1e4h-9e3z" fill="#fff"/><path id="path230" d="m12050 12250h-9e3v-1e4h18000v1e4h-9e3z" fill="none" stroke="#000" stroke-linejoin="round" stroke-width="100"/><text id="text232" class="TextShape" x="-1350" y="-3250"><tspan id="tspan234" class="TextParagraph" font-family="sans-serif" font-size="987px" font-weight="400"><tspan id="tspan236" class="TextPosition" x="3227" y="11503" fill="#000000"><tspan id="tspan238"/><tspan id="tspan240">ORIGINAL</tspan></tspan></tspan></text>
+<g id="g242" class="com.sun.star.drawing.CustomShape" transform="translate(-1350,-3250)"><g id="id8"><rect id="rect245" class="BoundingBox" x="7050" y="7950" width="7901" height="5501" fill="none"/><path id="path247" d="m11000 13400h-3900v-5400h7800v5400h-3900z" fill="#fff"/><path id="path249" d="m11000 13400h-3900v-5400h7800v5400h-3900z" fill="none" stroke="#3465a4" stroke-linejoin="round" stroke-width="100"/><text id="text251" class="TextShape"><tspan id="tspan253" class="TextParagraph" font-family="sans-serif" font-size="776px" font-weight="400"><tspan id="tspan255" class="TextPosition" x="7228" y="10969"><tspan id="tspan257" fill="#000080">V4L2_SEL_FLAG_LE</tspan></tspan></tspan></text>
+</g></g><rect id="rect262" class="BoundingBox" x="13700" y="7100" width="7101" height="101" fill="none"/><path id="path264" d="m20750 7150h-7e3" fill="none" marker-end="url(#Arrow2Mend)" stroke="#000080" stroke-linejoin="round" stroke-width="99.991"/><rect id="rect269" class="BoundingBox" x="3400" y="7100" width="2101" height="101" fill="none"/><path id="path271" d="m3450 7150h2e3" fill="none" marker-end="url(#marker5575)" stroke="#000080" stroke-linejoin="round" stroke-width="100"/><rect id="rect276" class="BoundingBox" x="9800" y="2900" width="101" height="1501" fill="none"/><path id="path278" d="m9850 2950v1400" fill="none" marker-end="url(#marker5259)" stroke="#000080" stroke-linejoin="round" stroke-width="100"/><rect id="rect283" class="BoundingBox" x="9600" y="10600" width="101" height="1301" fill="none"/><path id="path285" d="m9650 11850v-1200" fill="none"
+marker-end="url(#marker5469)" stroke="#000080" stroke-linejoin="round" stroke-width="100"/><rect id="rect290" class="BoundingBox" x="450" y="6850" width="2051" height="601" fill="none"/><path id="path292" d="m2450 7150h-2000.9" fill="none" marker-end="url(#marker6125)" stroke="#f00" stroke-linejoin="round" stroke-width="132.48"/><rect id="rect299" class="BoundingBox" x="21600" y="6750" width="2651" height="601" fill="none"/><path id="path301" d="m21650 7050h2522.6" fill="none" marker-end="url(#marker6001)" stroke="#f00" stroke-linejoin="round" stroke-width="120.41"/><rect id="rect308" class="BoundingBox" x="9550" y="550" width="601" height="1451" fill="none"/><path id="path310" d="m9837 1950v-1453" fill="none" marker-end="url(#marker6261)" stroke="#f00" stroke-linejoin="round" stroke-width="164.04"/><rect id="rect317" class="BoundingBox" x="9350" y="12500" width="601" height="1451"
+fill="none"/><path id="path319" d="m9650 12550v1505.2" fill="none" marker-end="url(#marker5693)" stroke="#f00" stroke-linejoin="round" stroke-width="166.96"/></svg>
diff --git a/Documentation/media/uapi/v4l/crop.svg b/Documentation/media/uapi/v4l/crop.svg
index dc9a471..3878fe4 100644
--- a/Documentation/media/uapi/v4l/crop.svg
+++ b/Documentation/media/uapi/v4l/crop.svg
@@ -18,33 +18,34 @@
viewBox="0 0 739.11388 339.6584"
sodipodi:docname="crop.svg"><metadata
id="metadata8"><rdf:RDF><cc:Work
- rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
- rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title /></cc:Work></rdf:RDF></metadata><defs
+ rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
+ rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title /></cc:Work></rdf:RDF></metadata><defs
id="defs6"><clipPath
clipPathUnits="userSpaceOnUse"
id="clipPath44"><path
- d="m 0,0 0,1895 4118,0 L 4118,0 0,0 Z m 3051.62,250.48 8.19,17.01 -46.93,23.31 29.61,-25.515 -38.12,8.505 47.25,-23.31 z m -1559.25,800.73 -8.5,-17.01 46.93,-23.31 -29.29,25.2 37.8,-8.19 -46.94,23.31 z"
- id="path46"
- inkscape:connector-curvature="0"
- style="clip-rule:evenodd" /></clipPath><clipPath
+ d="m 0,0 0,1895 4118,0 L 4118,0 0,0 Z m 3051.62,250.48 8.19,17.01 -46.93,23.31 29.61,-25.515 -38.12,8.505 47.25,-23.31 z m -1559.25,800.73 -8.5,-17.01 46.93,-23.31 -29.29,25.2 37.8,-8.19 -46.94,23.31 z"
+ id="path46"
+ inkscape:connector-curvature="0"
+ style="clip-rule:evenodd" /></clipPath><clipPath
clipPathUnits="userSpaceOnUse"
id="clipPath64"><path
- d="m 0,0 0,1895 4118,0 0,-1626 -1,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -1,0 0,-1 1,0 0,-1 1,0 0,-1 2,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 2,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 2,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 -4,0 0,1 -5,0 0,1 -4,0 0,1 -5,0 0,1 -4,0 0,1 -4,0 0,1 -4,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 1,0 0,3 1,0 0,2 1,0 0,2 1,0 L 4118,0 0,0 Z m 4074,272 0,-1 1,0 0,1 -1,0 z m -1486,743 0,-1 1,0 0,1 -1,0 z m -2,1 0,-1 1,0 0,1 -1,0 0,1 -1,0 0,1 -1,0 0,1 -1,0 0,1 -1,0 0,1 -1,0 0,1 -2,0 0,1 -1,0 0,1 -1,0 0,1 -1,0 0,1 -1,0 0,1 -1,0 0,1 -2,0 0,1 -1,0 0,1 -1,0 0,1 -1,0 0,1 -1,0 0,1 -1,0 0,1 -2,0 0,1 -1,0 0,2 2,0 0,-1 4,0 0,-1 5,0 0,-1 4,0 0,-1 5,0 0,-1 5,0 0,-1 4,0 0,-1 3,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -3,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,-2 -1,0 0,-2 -1,0 0,-2 -1,0 0,-2 -1,0 0,-2 -1,0 0,-2 -1,0 0,-2 -1,0 0,-2 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 z"
- id="path66"
- inkscape:connector-curvature="0"
- style="clip-rule:evenodd" /></clipPath><clipPath
+ d="m 0,0 0,1895 4118,0 0,-1626 -1,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -1,0 0,-1 1,0 0,-1 1,0 0,-1 2,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 2,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 2,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 1,0 0,-1 -4,0 0,1 -5,0 0,1 -4,0 0,1 -5,0 0,1 -4,0 0,1 -4,0 0,1 -4,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 1,0 0,3 1,0 0,2 1,0 0,2 1,0 L 4118,0 0,0 Z m 4074,272 0,-1 1,0 0,1 -1,0 z m -1486,743 0,-1 1,0 0,1 -1,0 z m -2,1 0,-1 1,0 0,1 -1,0 0,1 -1,0 0,1 -1,0 0,1 -1,0 0,1 -1,0 0,1 -1,0 0,1 -2,0 0,1 -1,0 0,1 -1,0 0,1 -1,0 0,1 -1,0 0,1 -1,0 0,1 -2,0 0,1 -1,0 0,1 -1,0 0,1
+-1,0 0,1 -1,0 0,1 -1,0 0,1 -2,0 0,1 -1,0 0,2 2,0 0,-1 4,0 0,-1 5,0 0,-1 4,0 0,-1 5,0 0,-1 5,0 0,-1 4,0 0,-1 3,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -3,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,1 -2,0 0,-2 -1,0 0,-2 -1,0 0,-2 -1,0 0,-2 -1,0 0,-2 -1,0 0,-2 -1,0 0,-2 -1,0 0,-2 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 0,-1 2,0 z"
+ id="path66"
+ inkscape:connector-curvature="0"
+ style="clip-rule:evenodd" /></clipPath><clipPath
clipPathUnits="userSpaceOnUse"
id="clipPath84"><path
- d="m 0,0 0,1895 4118,0 0,-136 -3,0 0,-1 -11,0 0,-1 -11,0 0,-1 -11,0 0,-1 -11,0 0,-1 5,0 0,-1 6,0 0,-1 7,0 0,-1 6,0 0,-1 6,0 0,-1 4,0 0,-1 -1,0 0,-1 -3,0 0,-1 -3,0 0,-1 -2,0 0,-1 -3,0 0,-1 -3,0 0,-1 -3,0 0,-1 -3,0 0,-1 -3,0 0,-1 -3,0 0,-1 -3,0 0,-1 7,0 0,1 11,0 0,1 11,0 0,1 11,0 0,1 3,0 L 4118,0 0,0 Z m 2552,1599 0,-1 2,0 0,1 11,0 0,1 11,0 0,1 11,0 0,1 11,0 0,1 -4,0 0,1 -7,0 0,1 -6,0 0,1 -7,0 0,1 -6,0 0,1 -3,0 0,1 2,0 0,1 2,0 0,1 3,0 0,1 3,0 0,1 3,0 0,1 3,0 0,1 3,0 0,1 2,0 0,1 3,0 0,1 3,0 0,1 3,0 0,1 -7,0 0,-1 -12,0 0,-1 -11,0 0,-1 -11,0 0,-1 -4,0 0,-1 1,0 0,-12 1,0 0,-4 z"
- id="path86"
- inkscape:connector-curvature="0"
- style="clip-rule:evenodd" /></clipPath><clipPath
+ d="m 0,0 0,1895 4118,0 0,-136 -3,0 0,-1 -11,0 0,-1 -11,0 0,-1 -11,0 0,-1 -11,0 0,-1 5,0 0,-1 6,0 0,-1 7,0 0,-1 6,0 0,-1 6,0 0,-1 4,0 0,-1 -1,0 0,-1 -3,0 0,-1 -3,0 0,-1 -2,0 0,-1 -3,0 0,-1 -3,0 0,-1 -3,0 0,-1 -3,0 0,-1 -3,0 0,-1 -3,0 0,-1 -3,0 0,-1 7,0 0,1 11,0 0,1 11,0 0,1 11,0 0,1 3,0 L 4118,0 0,0 Z m 2552,1599 0,-1 2,0 0,1 11,0 0,1 11,0 0,1 11,0 0,1 11,0 0,1 -4,0 0,1 -7,0 0,1 -6,0 0,1 -7,0 0,1 -6,0 0,1 -3,0 0,1 2,0 0,1 2,0 0,1 3,0 0,1 3,0 0,1 3,0 0,1 3,0 0,1 3,0 0,1 2,0 0,1 3,0 0,1 3,0 0,1 3,0 0,1 -7,0 0,-1 -12,0 0,-1 -11,0 0,-1 -11,0 0,-1 -4,0 0,-1 1,0 0,-12 1,0 0,-4 z"
+ id="path86"
+ inkscape:connector-curvature="0"
+ style="clip-rule:evenodd" /></clipPath><clipPath
clipPathUnits="userSpaceOnUse"
id="clipPath104"><path
- d="m 0,0 0,1895 4118,0 L 4118,0 0,0 Z m 3056.98,1740.43 -1.58,18.9 -52.6,-4.72 38.74,-6.3 -36.85,-12.6 52.29,4.72 z m -1570.28,-123.79 1.58,-18.9 52.6,4.72 -38.43,5.99 36.54,12.91 -52.29,-4.72 z"
- id="path106"
- inkscape:connector-curvature="0"
- style="clip-rule:evenodd" /></clipPath></defs><sodipodi:namedview
+ d="m 0,0 0,1895 4118,0 L 4118,0 0,0 Z m 3056.98,1740.43 -1.58,18.9 -52.6,-4.72 38.74,-6.3 -36.85,-12.6 52.29,4.72 z m -1570.28,-123.79 1.58,-18.9 52.6,4.72 -38.43,5.99 36.54,12.91 -52.29,-4.72 z"
+ id="path106"
+ inkscape:connector-curvature="0"
+ style="clip-rule:evenodd" /></clipPath></defs><sodipodi:namedview
pagecolor="#ffffff"
bordercolor="#666666"
borderopacity="1"
@@ -123,90 +124,90 @@
inkscape:connector-curvature="0" /><g
id="g40"
transform="matrix(0.14375794,0,0,0.14375794,-0.12334269,-0.08856738)"><g
- clip-path="url(#clipPath44)"
- id="g42"><path
- inkscape:connector-curvature="0"
- id="path48"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="M 1492.37,1040.5 3051.62,260.875" /></g></g><g
+ clip-path="url(#clipPath44)"
+ id="g42"><path
+ inkscape:connector-curvature="0"
+ id="path48"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="M 1492.37,1040.5 3051.62,260.875" /></g></g><g
id="g50"
transform="matrix(0.14375794,0,0,0.14375794,-0.12334269,-0.08856738)"><path
- inkscape:connector-curvature="0"
- id="path52"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
- d="m 1539.31,1027.9 -37.8,8.19 29.29,-25.2 8.51,17.01" /><path
- inkscape:connector-curvature="0"
- id="path54"
- style="fill:none;stroke:#000000;stroke-width:4.7249999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 1539.31,1027.9 -37.8,8.19 29.29,-25.2 8.51,17.01 z" /><path
- inkscape:connector-curvature="0"
- id="path56"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
- d="m 3004.37,273.79 38.12,-8.505 -29.61,25.515 -8.51,-17.01" /><path
- inkscape:connector-curvature="0"
- id="path58"
- style="fill:none;stroke:#000000;stroke-width:4.7249999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 3004.37,273.79 38.12,-8.505 -29.61,25.515 -8.51,-17.01 z" /></g><g
+ inkscape:connector-curvature="0"
+ id="path52"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+ d="m 1539.31,1027.9 -37.8,8.19 29.29,-25.2 8.51,17.01" /><path
+ inkscape:connector-curvature="0"
+ id="path54"
+ style="fill:none;stroke:#000000;stroke-width:4.7249999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 1539.31,1027.9 -37.8,8.19 29.29,-25.2 8.51,17.01 z" /><path
+ inkscape:connector-curvature="0"
+ id="path56"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+ d="m 3004.37,273.79 38.12,-8.505 -29.61,25.515 -8.51,-17.01" /><path
+ inkscape:connector-curvature="0"
+ id="path58"
+ style="fill:none;stroke:#000000;stroke-width:4.7249999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 3004.37,273.79 38.12,-8.505 -29.61,25.515 -8.51,-17.01 z" /></g><g
id="g60"
transform="matrix(0.14375794,0,0,0.14375794,-0.12334269,-0.08856738)"><g
- clip-path="url(#clipPath64)"
- id="g62"><path
- inkscape:connector-curvature="0"
- id="path68"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="M 2555.5,1040.5 4114.75,260.875" /></g></g><g
+ clip-path="url(#clipPath64)"
+ id="g62"><path
+ inkscape:connector-curvature="0"
+ id="path68"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="M 2555.5,1040.5 4114.75,260.875" /></g></g><g
id="g70"
transform="matrix(0.14375794,0,0,0.14375794,-0.12334269,-0.08856738)"><path
- inkscape:connector-curvature="0"
- id="path72"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
- d="m 2602.43,1027.9 -37.8,8.19 29.3,-25.2 8.5,17.01" /><path
- inkscape:connector-curvature="0"
- id="path74"
- style="fill:none;stroke:#000000;stroke-width:4.7249999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 2602.43,1027.9 -37.8,8.19 29.3,-25.2 8.5,17.01 z" /><path
- inkscape:connector-curvature="0"
- id="path76"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
- d="m 4067.5,273.79 38.11,-8.505 -29.61,25.515 -8.5,-17.01" /><path
- inkscape:connector-curvature="0"
- id="path78"
- style="fill:none;stroke:#000000;stroke-width:4.7249999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 4067.5,273.79 38.11,-8.505 -29.61,25.515 -8.5,-17.01 z" /></g><g
+ inkscape:connector-curvature="0"
+ id="path72"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+ d="m 2602.43,1027.9 -37.8,8.19 29.3,-25.2 8.5,17.01" /><path
+ inkscape:connector-curvature="0"
+ id="path74"
+ style="fill:none;stroke:#000000;stroke-width:4.7249999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 2602.43,1027.9 -37.8,8.19 29.3,-25.2 8.5,17.01 z" /><path
+ inkscape:connector-curvature="0"
+ id="path76"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+ d="m 4067.5,273.79 38.11,-8.505 -29.61,25.515 -8.5,-17.01" /><path
+ inkscape:connector-curvature="0"
+ id="path78"
+ style="fill:none;stroke:#000000;stroke-width:4.7249999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 4067.5,273.79 38.11,-8.505 -29.61,25.515 -8.5,-17.01 z" /></g><g
id="g80"
transform="matrix(0.14375794,0,0,0.14375794,-0.12334269,-0.08856738)"><g
- clip-path="url(#clipPath84)"
- id="g82"><path
- inkscape:connector-curvature="0"
- id="path88"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 2555.5,1607.5 1559.25,141.75" /></g></g><g
+ clip-path="url(#clipPath84)"
+ id="g82"><path
+ inkscape:connector-curvature="0"
+ id="path88"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 2555.5,1607.5 1559.25,141.75" /></g></g><g
id="g90"
transform="matrix(0.14375794,0,0,0.14375794,-0.12334269,-0.08856738)"><path
- inkscape:connector-curvature="0"
- id="path92"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
- d="m 2602.12,1621.36 -36.54,-12.91 38.43,-5.99 -1.89,18.9" /><path
- inkscape:connector-curvature="0"
- id="path94"
- style="fill:none;stroke:#000000;stroke-width:4.7249999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 2602.12,1621.36 -36.54,-12.91 38.43,-5.99 -1.89,18.9 z" /><path
- inkscape:connector-curvature="0"
- id="path96"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
- d="m 4067.81,1735.71 36.86,12.6 -38.75,6.3 1.89,-18.9" /><path
- inkscape:connector-curvature="0"
- id="path98"
- style="fill:none;stroke:#000000;stroke-width:4.7249999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 4067.81,1735.71 36.86,12.6 -38.75,6.3 1.89,-18.9 z" /></g><g
+ inkscape:connector-curvature="0"
+ id="path92"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+ d="m 2602.12,1621.36 -36.54,-12.91 38.43,-5.99 -1.89,18.9" /><path
+ inkscape:connector-curvature="0"
+ id="path94"
+ style="fill:none;stroke:#000000;stroke-width:4.7249999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 2602.12,1621.36 -36.54,-12.91 38.43,-5.99 -1.89,18.9 z" /><path
+ inkscape:connector-curvature="0"
+ id="path96"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+ d="m 4067.81,1735.71 36.86,12.6 -38.75,6.3 1.89,-18.9" /><path
+ inkscape:connector-curvature="0"
+ id="path98"
+ style="fill:none;stroke:#000000;stroke-width:4.7249999;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 4067.81,1735.71 36.86,12.6 -38.75,6.3 1.89,-18.9 z" /></g><g
id="g100"
transform="matrix(0.14375794,0,0,0.14375794,-0.12334269,-0.08856738)"><g
- clip-path="url(#clipPath104)"
- id="g102"><path
- inkscape:connector-curvature="0"
- id="path108"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 1492.37,1607.5 1559.25,141.75" /></g></g><path
+ clip-path="url(#clipPath104)"
+ id="g102"><path
+ inkscape:connector-curvature="0"
+ id="path108"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 1492.37,1607.5 1559.25,141.75" /></g></g><path
d="m 221.11869,232.99481 -5.25292,-1.85592 5.52462,-0.86111 -0.2717,2.71703"
style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
id="path112"
@@ -225,43 +226,43 @@
inkscape:connector-curvature="0" /><g
id="g120"
transform="matrix(1.4375794,0,0,1.4375794,-0.12334269,-0.08856738)"><text
- transform="matrix(1,0,0,-1,204.52,9.07751)"
- style="font-variant:normal;font-weight:normal;font-size:6.61499977px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#d10000;fill-opacity:1;fill-rule:nonzero;stroke:none"
- id="text122"><tspan
- x="0 3.3074999 6.9854398 8.45397 12.13191 15.80985 19.11735 21.320145 24.998085 28.676025 31.983524 35.661465 39.339405 41.178375 44.856316 48.534256 52.212196 55.890137 59.568073"
- y="0"
- sodipodi:role="line"
- id="tspan124">v4l2_cropcap.bounds</tspan></text>
+ transform="matrix(1,0,0,-1,204.52,9.07751)"
+ style="font-variant:normal;font-weight:normal;font-size:6.61499977px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#d10000;fill-opacity:1;fill-rule:nonzero;stroke:none"
+ id="text122"><tspan
+ x="0 3.3074999 6.9854398 8.45397 12.13191 15.80985 19.11735 21.320145 24.998085 28.676025 31.983524 35.661465 39.339405 41.178375 44.856316 48.534256 52.212196 55.890137 59.568073"
+ y="0"
+ sodipodi:role="line"
+ id="tspan124">v4l2_cropcap.bounds</tspan></text>
</g><g
id="g126"
transform="matrix(1.4375794,0,0,1.4375794,-0.12334269,-0.08856738)"><text
- transform="matrix(1,0,0,-1,58.5175,166.42)"
- style="font-variant:normal;font-weight:normal;font-size:6.61499977px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#0000d1;fill-opacity:1;fill-rule:nonzero;stroke:none"
- id="text128"><tspan
- x="0 3.3074999 6.9854398 8.45397 12.13191 15.80985 19.11735 21.320145 24.998085 28.676025 31.983524 35.661465 39.339405 41.178375 44.856316 48.534256 50.373226 52.576019 56.25396 59.561459"
- y="0"
- sodipodi:role="line"
- id="tspan130">v4l2_cropcap.defrect</tspan></text>
+ transform="matrix(1,0,0,-1,58.5175,166.42)"
+ style="font-variant:normal;font-weight:normal;font-size:6.61499977px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#0000d1;fill-opacity:1;fill-rule:nonzero;stroke:none"
+ id="text128"><tspan
+ x="0 3.3074999 6.9854398 8.45397 12.13191 15.80985 19.11735 21.320145 24.998085 28.676025 31.983524 35.661465 39.339405 41.178375 44.856316 48.534256 50.373226 52.576019 56.25396 59.561459"
+ y="0"
+ sodipodi:role="line"
+ id="tspan130">v4l2_cropcap.defrect</tspan></text>
</g><g
id="g132"
transform="matrix(1.4375794,0,0,1.4375794,-0.12334269,-0.08856738)"><text
- transform="matrix(1,0,0,-1,153.49,152.245)"
- style="font-variant:normal;font-weight:normal;font-size:6.61499977px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#008f00;fill-opacity:1;fill-rule:nonzero;stroke:none"
- id="text134"><tspan
- x="0 3.3074999 6.9854398 8.45397 12.13191 15.80985 19.11735 21.320145 24.998085 28.676025 30.514996"
- y="0"
- sodipodi:role="line"
- id="tspan136">v4l2_crop.c</tspan></text>
+ transform="matrix(1,0,0,-1,153.49,152.245)"
+ style="font-variant:normal;font-weight:normal;font-size:6.61499977px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#008f00;fill-opacity:1;fill-rule:nonzero;stroke:none"
+ id="text134"><tspan
+ x="0 3.3074999 6.9854398 8.45397 12.13191 15.80985 19.11735 21.320145 24.998085 28.676025 30.514996"
+ y="0"
+ sodipodi:role="line"
+ id="tspan136">v4l2_crop.c</tspan></text>
</g><g
id="g138"
transform="matrix(1.4375794,0,0,1.4375794,-0.12334269,-0.08856738)"><text
- transform="matrix(1,0,0,-1,309.415,30.34)"
- style="font-variant:normal;font-weight:normal;font-size:6.61499977px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#b000b0;fill-opacity:1;fill-rule:nonzero;stroke:none"
- id="text140"><tspan
- x="0 3.3074999 6.9854398 8.45397 12.13191 15.80985 17.648821 21.326759 23.529554 29.03985 32.717789"
- y="0"
- sodipodi:role="line"
- id="tspan142">v4l2_format</tspan></text>
+ transform="matrix(1,0,0,-1,309.415,30.34)"
+ style="font-variant:normal;font-weight:normal;font-size:6.61499977px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#b000b0;fill-opacity:1;fill-rule:nonzero;stroke:none"
+ id="text140"><tspan
+ x="0 3.3074999 6.9854398 8.45397 12.13191 15.80985 17.648821 21.326759 23.529554 29.03985 32.717789"
+ y="0"
+ sodipodi:role="line"
+ id="tspan142">v4l2_format</tspan></text>
</g><text
xml:space="preserve"
style="font-style:normal;font-weight:normal;font-size:32px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
@@ -270,12 +271,12 @@
id="text3396"
sodipodi:linespacing="125%"
transform="scale(1,-1)"><tspan
- sodipodi:role="line"
- id="tspan3398"
- x="-99.291145"
- y="-239.49893"></tspan><tspan
- sodipodi:role="line"
- x="-99.291145"
- y="-199.49893"
- id="tspan3400" /></text>
+ sodipodi:role="line"
+ id="tspan3398"
+ x="-99.291145"
+ y="-239.49893"></tspan><tspan
+ sodipodi:role="line"
+ x="-99.291145"
+ y="-199.49893"
+ id="tspan3400" /></text>
</g></svg>
diff --git a/Documentation/media/uapi/v4l/fieldseq_bt.svg b/Documentation/media/uapi/v4l/fieldseq_bt.svg
index b195301..909d758 100644
--- a/Documentation/media/uapi/v4l/fieldseq_bt.svg
+++ b/Documentation/media/uapi/v4l/fieldseq_bt.svg
@@ -42,15 +42,15 @@
inkscape:window-maximized="1"
inkscape:current-layer="g3627" /><metadata
id="metadata3625"><rdf:RDF><cc:Work
- rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
- rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title /></cc:Work></rdf:RDF></metadata><defs
+ rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
+ rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title /></cc:Work></rdf:RDF></metadata><defs
id="defs3623"><clipPath
id="clipPath4301"
clipPathUnits="userSpaceOnUse"><path
- style="clip-rule:evenodd"
- inkscape:connector-curvature="0"
- id="path4303"
- d="M 0,6040 0,0 l 5650,0 0,6040 -5650,0 z m 4786.76,-99.89 103.92,0 0,56.69 -103.92,0 0,0 85.03,-28.35 -85.03,-28.34 z" /></clipPath></defs><g
+ style="clip-rule:evenodd"
+ inkscape:connector-curvature="0"
+ id="path4303"
+ d="M 0,6040 0,0 l 5650,0 0,6040 -5650,0 z m 4786.76,-99.89 103.92,0 0,56.69 -103.92,0 0,0 85.03,-28.35 -85.03,-28.34 z" /></clipPath></defs><g
transform="matrix(1.25,0,0,-1.25,-1.0537,751.94632)"
inkscape:label="fieldseq_bt"
inkscape:groupmode="layer"
@@ -1390,13 +1390,13 @@
transform="scale(0.1,0.1)"
id="g4297"
style=""><g
- id="g4299"
- clip-path="url(#clipPath4301)"
- style=""><path
- d="m 3778.18,5968.45 1105.42,0"
- style="fill:none;stroke:#000000;stroke-width:14.17199993;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- id="path4305"
- inkscape:connector-curvature="0" /></g></g><path
+ id="g4299"
+ clip-path="url(#clipPath4301)"
+ style=""><path
+ d="m 3778.18,5968.45 1105.42,0"
+ style="fill:none;stroke:#000000;stroke-width:14.17199993;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ id="path4305"
+ inkscape:connector-curvature="0" /></g></g><path
d="m 478.676,594.011 8.503,2.834 -8.503,2.835 0,-5.669"
style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
id="path4307"
@@ -2466,148 +2466,148 @@
id="text4841"
style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan4843"
- sodipodi:role="line"
- y="-533.07098"
- x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 88.500237 97.835464">V4L2_FIELD_TOP</tspan><tspan
- id="tspan4845"
- sodipodi:role="line"
- y="-465.04559"
- x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 98.507408 105.83879 113.17018 122.5054">V4L2_FIELD_BOTTOM</tspan><tspan
- id="tspan4847"
- sodipodi:role="line"
- y="-397.0202"
- x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 95.843628 103.17502 111.17835 119.84163 128.5049 136.50824 143.83963">V4L2_FIELD_ALTERNATE</tspan></text>
+ id="tspan4843"
+ sodipodi:role="line"
+ y="-533.07098"
+ x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 88.500237 97.835464">V4L2_FIELD_TOP</tspan><tspan
+ id="tspan4845"
+ sodipodi:role="line"
+ y="-465.04559"
+ x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 98.507408 105.83879 113.17018 122.5054">V4L2_FIELD_BOTTOM</tspan><tspan
+ id="tspan4847"
+ sodipodi:role="line"
+ y="-397.0202"
+ x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 95.843628 103.17502 111.17835 119.84163 128.5049 136.50824 143.83963">V4L2_FIELD_ALTERNATE</tspan></text>
<text
y="-316.23969"
x="103.58983"
id="text4849"
style="font-variant:normal;font-weight:normal;font-size:8.2495203px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan4851"
- sodipodi:role="line"
- y="-316.23969"
- x="103.58983 109.09226 113.67899 118.26572 122.85246 127.43919 132.47964 134.77301 140.27545 144.86218 150.81833 155.40506 160.44553 166.86365 188.62184 194.12427 198.711 203.29774 207.88448 212.47121 217.51166 219.80502 225.30746 229.8942 235.85034 240.43707 245.9395 252.35764 257.3981 262.43854 268.85669 375.69293 381.19534 385.78207 390.3688 394.95554 399.54227 404.58273 406.8761 412.37854 416.96527 422.92142 427.50815 433.01059 439.42871 444.46918 449.50961 455.92776 1.551828 7.0542617 11.640993 16.227724 20.814463 25.401194 30.441652 32.735016 38.237442 42.824177 48.780331 53.367065 58.869492 65.287621 70.328079 75.368538 81.786659">V4L2_FIELD_TOPV4L2_FIELD_BOTTOMV4L2_FIELD_BOTTOMV4L2_FIELD_BOTTOM</tspan><tspan
- id="tspan4853"
- sodipodi:role="line"
- y="-328.99481"
- x="10.054964 14.17972 18.766451 20.597849 25.18458 29.771311 34.358047 38.944778 41.238144 43.531509 48.118244 50.865334 53.158699 55.452068 57.283459 61.870193 63.701588 68.288322">v4l2_buffer.field:</tspan></text>
+ id="tspan4851"
+ sodipodi:role="line"
+ y="-316.23969"
+ x="103.58983 109.09226 113.67899 118.26572 122.85246 127.43919 132.47964 134.77301 140.27545 144.86218 150.81833 155.40506 160.44553 166.86365 188.62184 194.12427 198.711 203.29774 207.88448 212.47121 217.51166 219.80502 225.30746 229.8942 235.85034 240.43707 245.9395 252.35764 257.3981 262.43854 268.85669 375.69293 381.19534 385.78207 390.3688 394.95554 399.54227 404.58273 406.8761 412.37854 416.96527 422.92142 427.50815 433.01059 439.42871 444.46918 449.50961 455.92776 1.551828 7.0542617 11.640993 16.227724 20.814463 25.401194 30.441652 32.735016 38.237442 42.824177 48.780331 53.367065 58.869492 65.287621 70.328079 75.368538 81.786659">V4L2_FIELD_TOPV4L2_FIELD_BOTTOMV4L2_FIELD_BOTTOMV4L2_FIELD_BOTTOM</tspan><tspan
+ id="tspan4853"
+ sodipodi:role="line"
+ y="-328.99481"
+ x="10.054964 14.17972 18.766451 20.597849 25.18458 29.771311 34.358047 38.944778 41.238144 43.531509 48.118244 50.865334 53.158699 55.452068 57.283459 61.870193 63.701588 68.288322">v4l2_buffer.field:</tspan></text>
<text
y="-592.59381"
x="5.8034"
id="text4855"
style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan4857"
- sodipodi:role="line"
- y="-592.59381"
- x="5.8034 13.134789 19.806232 29.801399 36.472843 43.144287 47.139954 53.811398 56.475174 59.810898 66.482346 70.478004 77.149452 83.820892 87.816566 91.152283 94.488007 101.15945 107.83089 111.16662 114.50233 121.17377 131.16895 134.50468 137.84041 140.50418 147.17563 149.8394 156.51085 159.84657 163.1823 165.84607 169.84174 175.84123 179.17696 182.51268 185.8484 189.84407 196.51552 203.18695 209.18646 219.18163 221.8454 225.18112 228.51685 235.18829 241.85973 245.19545 249.19112 255.86256 259.19827 265.86972 269.20544 272.54117 282.53635 285.87207 294.53534 301.86673 309.87006 318.53336">Temporal order, bottom field first transmitted (e.g. M/NTSC)</tspan></text>
+ id="tspan4857"
+ sodipodi:role="line"
+ y="-592.59381"
+ x="5.8034 13.134789 19.806232 29.801399 36.472843 43.144287 47.139954 53.811398 56.475174 59.810898 66.482346 70.478004 77.149452 83.820892 87.816566 91.152283 94.488007 101.15945 107.83089 111.16662 114.50233 121.17377 131.16895 134.50468 137.84041 140.50418 147.17563 149.8394 156.51085 159.84657 163.1823 165.84607 169.84174 175.84123 179.17696 182.51268 185.8484 189.84407 196.51552 203.18695 209.18646 219.18163 221.8454 225.18112 228.51685 235.18829 241.85973 245.19545 249.19112 255.86256 259.19827 265.86972 269.20544 272.54117 282.53635 285.87207 294.53534 301.86673 309.87006 318.53336">Temporal order, bottom field first transmitted (e.g. M/NTSC)</tspan></text>
<text
y="-316.23981"
x="290.6604"
id="text4859"
style="font-variant:normal;font-weight:normal;font-size:8.2495203px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan4861"
- sodipodi:role="line"
- y="-316.23981"
- x="290.6604 296.16284 300.74957 305.3363 309.92303 314.50977 319.55023 321.8436 327.34601 331.93274 337.88889 342.47565 347.51608 353.9342 477.73062 483.23306 487.81979 492.40652 496.99326 501.57999 506.62045 508.91382 514.41626 519.00299 524.95911 529.5459 534.5863 541.00446">V4L2_FIELD_TOPV4L2_FIELD_TOP</tspan></text>
+ id="tspan4861"
+ sodipodi:role="line"
+ y="-316.23981"
+ x="290.6604 296.16284 300.74957 305.3363 309.92303 314.50977 319.55023 321.8436 327.34601 331.93274 337.88889 342.47565 347.51608 353.9342 477.73062 483.23306 487.81979 492.40652 496.99326 501.57999 506.62045 508.91382 514.41626 519.00299 524.95911 529.5459 534.5863 541.00446">V4L2_FIELD_TOPV4L2_FIELD_TOP</tspan></text>
<text
y="-299.23349"
x="5.8034"
id="text4863"
style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan4865"
- sodipodi:role="line"
- y="-299.23349"
- x="5.8034 13.806733 20.478176 27.149622 33.821064 40.492508 47.823895 51.159618 59.162952 65.834396 74.497673 81.169121 84.504837 93.168114 100.4995 108.50284 117.16611 123.83755 131.8409 140.50418 148.50751 157.17079 160.50652 163.84224 167.17796 175.18129 181.85274 188.52419 195.19562 201.86707 209.19846 212.53418 220.53751 227.20895 235.87224 242.54367 245.87939 254.54268 261.87405 269.87741 278.54068 285.21213 293.21545 301.87872 309.88205 318.54535 325.2168 333.22012">V4L2_FIELD_INTERLACED / V4L2_FIELD_INTERLACED_BT</tspan><tspan
- id="tspan4867"
- sodipodi:role="line"
- y="-192.9435"
- x="1.5518398 9.5551729 16.226616 22.898062 29.569506 36.240948 43.572334 46.908058 54.911392 61.582836 70.246117 76.917557 80.253281 88.916557 96.247948 104.25128 112.91456 119.586 127.58932 136.25262 144.25595 152.91924 159.59067 166.92206 174.9254 178.26112 182.25679 192.25195 194.91573 200.91524 207.58667 210.25046 212.91423 219.58568 226.25713 232.92856 239.60001">V4L2_FIELD_INTERLACED_TB (misaligned)</tspan><tspan
- id="tspan4869"
- sodipodi:role="line"
- y="-86.653496"
- x="5.8034 13.806733 20.478176 27.149622 33.821064 40.492508 47.823895 51.159618 59.162952 65.834396 74.497673 81.169121 89.172447 97.175781 106.511 113.18245 121.18579">V4L2_FIELD_SEQ_BT</tspan></text>
+ id="tspan4865"
+ sodipodi:role="line"
+ y="-299.23349"
+ x="5.8034 13.806733 20.478176 27.149622 33.821064 40.492508 47.823895 51.159618 59.162952 65.834396 74.497673 81.169121 84.504837 93.168114 100.4995 108.50284 117.16611 123.83755 131.8409 140.50418 148.50751 157.17079 160.50652 163.84224 167.17796 175.18129 181.85274 188.52419 195.19562 201.86707 209.19846 212.53418 220.53751 227.20895 235.87224 242.54367 245.87939 254.54268 261.87405 269.87741 278.54068 285.21213 293.21545 301.87872 309.88205 318.54535 325.2168 333.22012">V4L2_FIELD_INTERLACED / V4L2_FIELD_INTERLACED_BT</tspan><tspan
+ id="tspan4867"
+ sodipodi:role="line"
+ y="-192.9435"
+ x="1.5518398 9.5551729 16.226616 22.898062 29.569506 36.240948 43.572334 46.908058 54.911392 61.582836 70.246117 76.917557 80.253281 88.916557 96.247948 104.25128 112.91456 119.586 127.58932 136.25262 144.25595 152.91924 159.59067 166.92206 174.9254 178.26112 182.25679 192.25195 194.91573 200.91524 207.58667 210.25046 212.91423 219.58568 226.25713 232.92856 239.60001">V4L2_FIELD_INTERLACED_TB (misaligned)</tspan><tspan
+ id="tspan4869"
+ sodipodi:role="line"
+ y="-86.653496"
+ x="5.8034 13.806733 20.478176 27.149622 33.821064 40.492508 47.823895 51.159618 59.162952 65.834396 74.497673 81.169121 89.172447 97.175781 106.511 113.18245 121.18579">V4L2_FIELD_SEQ_BT</tspan></text>
<text
y="-533.07098"
x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 88.500237 97.835464"
id="text4592"
style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan4594"
- sodipodi:role="line"
- y="-533.07098"
- x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 88.500237 97.835464">V4L2_FIELD_TOP</tspan></text>
+ id="tspan4594"
+ sodipodi:role="line"
+ y="-533.07098"
+ x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 88.500237 97.835464">V4L2_FIELD_TOP</tspan></text>
<text
y="-465.04559"
x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 98.507408 105.83879 113.17018 122.5054"
id="text4596"
style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan4598"
- sodipodi:role="line"
- y="-465.04559"
- x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 98.507408 105.83879 113.17018 122.5054">V4L2_FIELD_BOTTOM</tspan></text>
+ id="tspan4598"
+ sodipodi:role="line"
+ y="-465.04559"
+ x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 98.507408 105.83879 113.17018 122.5054">V4L2_FIELD_BOTTOM</tspan></text>
<text
y="-397.0202"
x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 95.843628 103.17502 111.17835 119.84163 128.5049 136.50824 143.83963"
id="text4600"
style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan4602"
- sodipodi:role="line"
- y="-397.0202"
- x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 95.843628 103.17502 111.17835 119.84163 128.5049 136.50824 143.83963">V4L2_FIELD_ALTERNATE</tspan></text>
+ id="tspan4602"
+ sodipodi:role="line"
+ y="-397.0202"
+ x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 95.843628 103.17502 111.17835 119.84163 128.5049 136.50824 143.83963">V4L2_FIELD_ALTERNATE</tspan></text>
<text
y="-299.23349"
x="5.8034 13.806733 20.478176 27.149622 33.821064 40.492508 47.823895 51.159618 59.162952 65.834396 74.497673 81.169121 84.504837 93.168114 100.4995 108.50284 117.16611 123.83755 131.8409 140.50418 148.50751 157.17079 160.50652 163.84224 167.17796 175.18129 181.85274 188.52419 195.19562 201.86707 209.19846 212.53418 220.53751 227.20895 235.87224 242.54367 245.87939 254.54268 261.87405 269.87741 278.54068 285.21213 293.21545 301.87872 309.88205 318.54535 325.2168 333.22012"
id="text5862"
style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan5864"
- sodipodi:role="line"
- y="-299.23349"
- x="5.8034 13.806733 20.478176 27.149622 33.821064 40.492508 47.823895 51.159618 59.162952 65.834396 74.497673 81.169121 84.504837 93.168114 100.4995 108.50284 117.16611 123.83755 131.8409 140.50418 148.50751 157.17079 160.50652 163.84224 167.17796 175.18129 181.85274 188.52419 195.19562 201.86707 209.19846 212.53418 220.53751 227.20895 235.87224 242.54367 245.87939 254.54268 261.87405 269.87741 278.54068 285.21213 293.21545 301.87872 309.88205 318.54535 325.2168 333.22012">V4L2_FIELD_INTERLACED / V4L2_FIELD_INTERLACED_BT</tspan></text>
+ id="tspan5864"
+ sodipodi:role="line"
+ y="-299.23349"
+ x="5.8034 13.806733 20.478176 27.149622 33.821064 40.492508 47.823895 51.159618 59.162952 65.834396 74.497673 81.169121 84.504837 93.168114 100.4995 108.50284 117.16611 123.83755 131.8409 140.50418 148.50751 157.17079 160.50652 163.84224 167.17796 175.18129 181.85274 188.52419 195.19562 201.86707 209.19846 212.53418 220.53751 227.20895 235.87224 242.54367 245.87939 254.54268 261.87405 269.87741 278.54068 285.21213 293.21545 301.87872 309.88205 318.54535 325.2168 333.22012">V4L2_FIELD_INTERLACED / V4L2_FIELD_INTERLACED_BT</tspan></text>
<text
y="-192.9435"
x="1.5518398 9.5551729 16.226616 22.898062 29.569506 36.240948 43.572334 46.908058 54.911392 61.582836 70.246117 76.917557 80.253281 88.916557 96.247948 104.25128 112.91456 119.586 127.58932 136.25262 144.25595 152.91924 159.59067 166.92206 174.9254 178.26112 182.25679 192.25195 194.91573 200.91524 207.58667 210.25046 212.91423 219.58568 226.25713 232.92856 239.60001"
id="text5866"
style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan5868"
- sodipodi:role="line"
- y="-192.9435"
- x="1.5518398 9.5551729 16.226616 22.898062 29.569506 36.240948 43.572334 46.908058 54.911392 61.582836 70.246117 76.917557 80.253281 88.916557 96.247948 104.25128 112.91456 119.586 127.58932 136.25262 144.25595 152.91924 159.59067 166.92206 174.9254 178.26112 182.25679 192.25195 194.91573 200.91524 207.58667 210.25046 212.91423 219.58568 226.25713 232.92856 239.60001">V4L2_FIELD_INTERLACED_TB (misaligned)</tspan></text>
+ id="tspan5868"
+ sodipodi:role="line"
+ y="-192.9435"
+ x="1.5518398 9.5551729 16.226616 22.898062 29.569506 36.240948 43.572334 46.908058 54.911392 61.582836 70.246117 76.917557 80.253281 88.916557 96.247948 104.25128 112.91456 119.586 127.58932 136.25262 144.25595 152.91924 159.59067 166.92206 174.9254 178.26112 182.25679 192.25195 194.91573 200.91524 207.58667 210.25046 212.91423 219.58568 226.25713 232.92856 239.60001">V4L2_FIELD_INTERLACED_TB (misaligned)</tspan></text>
<text
y="-86.653496"
x="5.8034 13.806733 20.478176 27.149622 33.821064 40.492508 47.823895 51.159618 59.162952 65.834396 74.497673 81.169121 89.172447 97.175781 106.511 113.18245 121.18579"
id="text5870"
style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan5872"
- sodipodi:role="line"
- y="-86.653496"
- x="5.8034 13.806733 20.478176 27.149622 33.821064 40.492508 47.823895 51.159618 59.162952 65.834396 74.497673 81.169121 89.172447 97.175781 106.511 113.18245 121.18579">V4L2_FIELD_SEQ_BT</tspan></text>
+ id="tspan5872"
+ sodipodi:role="line"
+ y="-86.653496"
+ x="5.8034 13.806733 20.478176 27.149622 33.821064 40.492508 47.823895 51.159618 59.162952 65.834396 74.497673 81.169121 89.172447 97.175781 106.511 113.18245 121.18579">V4L2_FIELD_SEQ_BT</tspan></text>
<text
y="-316.23969"
x="103.58983 109.09226 113.67899 118.26572 122.85246 127.43919 132.47964 134.77301 140.27545 144.86218 150.81833 155.40506 160.44553 166.86365 188.62184 194.12427 198.711 203.29774 207.88448 212.47121 217.51166 219.80502 225.30746 229.8942 235.85034 240.43707 245.9395 252.35764 257.3981 262.43854 268.85669 375.69293 381.19534 385.78207 390.3688 394.95554 399.54227 404.58273 406.8761 412.37854 416.96527 422.92142 427.50815 433.01059 439.42871 444.46918 449.50961 455.92776 1.551828 7.0542617 11.640993 16.227724 20.814463 25.401194 30.441652 32.735016 38.237442 42.824177 48.780331 53.367065 58.869492 65.287621 70.328079 75.368538 81.786659"
id="text7144"
style="font-variant:normal;font-weight:normal;font-size:8.2495203px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan7146"
- sodipodi:role="line"
- y="-316.23969"
- x="103.58983 109.09226 113.67899 118.26572 122.85246 127.43919 132.47964 134.77301 140.27545 144.86218 150.81833 155.40506 160.44553 166.86365 188.62184 194.12427 198.711 203.29774 207.88448 212.47121 217.51166 219.80502 225.30746 229.8942 235.85034 240.43707 245.9395 252.35764 257.3981 262.43854 268.85669 375.69293 381.19534 385.78207 390.3688 394.95554 399.54227 404.58273 406.8761 412.37854 416.96527 422.92142 427.50815 433.01059 439.42871 444.46918 449.50961 455.92776 1.551828 7.0542617 11.640993 16.227724 20.814463 25.401194 30.441652 32.735016 38.237442 42.824177 48.780331 53.367065 58.869492 65.287621 70.328079 75.368538 81.786659">V4L2_FIELD_TOPV4L2_FIELD_BOTTOMV4L2_FIELD_BOTTOMV4L2_FIELD_BOTTOM</tspan></text>
+ id="tspan7146"
+ sodipodi:role="line"
+ y="-316.23969"
+ x="103.58983 109.09226 113.67899 118.26572 122.85246 127.43919 132.47964 134.77301 140.27545 144.86218 150.81833 155.40506 160.44553 166.86365 188.62184 194.12427 198.711 203.29774 207.88448 212.47121 217.51166 219.80502 225.30746 229.8942 235.85034 240.43707 245.9395 252.35764 257.3981 262.43854 268.85669 375.69293 381.19534 385.78207 390.3688 394.95554 399.54227 404.58273 406.8761 412.37854 416.96527 422.92142 427.50815 433.01059 439.42871 444.46918 449.50961 455.92776 1.551828 7.0542617 11.640993 16.227724 20.814463 25.401194 30.441652 32.735016 38.237442 42.824177 48.780331 53.367065 58.869492 65.287621 70.328079 75.368538 81.786659">V4L2_FIELD_TOPV4L2_FIELD_BOTTOMV4L2_FIELD_BOTTOMV4L2_FIELD_BOTTOM</tspan></text>
<text
y="-328.99481"
x="10.054964 14.17972 18.766451 20.597849 25.18458 29.771311 34.358047 38.944778 41.238144 43.531509 48.118244 50.865334 53.158699 55.452068 57.283459 61.870193 63.701588 68.288322"
id="text7148"
style="font-variant:normal;font-weight:normal;font-size:8.2495203px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan7150"
- sodipodi:role="line"
- y="-328.99481"
- x="10.054964 14.17972 18.766451 20.597849 25.18458 29.771311 34.358047 38.944778 41.238144 43.531509 48.118244 50.865334 53.158699 55.452068 57.283459 61.870193 63.701588 68.288322">v4l2_buffer.field:</tspan></text>
+ id="tspan7150"
+ sodipodi:role="line"
+ y="-328.99481"
+ x="10.054964 14.17972 18.766451 20.597849 25.18458 29.771311 34.358047 38.944778 41.238144 43.531509 48.118244 50.865334 53.158699 55.452068 57.283459 61.870193 63.701588 68.288322">v4l2_buffer.field:</tspan></text>
</g></svg>
\ No newline at end of file
diff --git a/Documentation/media/uapi/v4l/fieldseq_tb.svg b/Documentation/media/uapi/v4l/fieldseq_tb.svg
index 6a7b10a..7c74344 100644
--- a/Documentation/media/uapi/v4l/fieldseq_tb.svg
+++ b/Documentation/media/uapi/v4l/fieldseq_tb.svg
@@ -42,15 +42,15 @@
inkscape:window-maximized="1"
inkscape:current-layer="g5551" /><metadata
id="metadata5549"><rdf:RDF><cc:Work
- rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
- rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title /></cc:Work></rdf:RDF></metadata><defs
+ rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
+ rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title /></cc:Work></rdf:RDF></metadata><defs
id="defs5547"><clipPath
id="clipPath6753"
clipPathUnits="userSpaceOnUse"><path
- style="clip-rule:evenodd"
- inkscape:connector-curvature="0"
- id="path6755"
- d="M 0,6000 0,0 l 5660,0 0,6000 -5660,0 z m 4786.76,-102.89 103.92,0 0,56.69 -103.92,0 0,0 85.03,-28.35 -85.03,-28.34 z" /></clipPath></defs><g
+ style="clip-rule:evenodd"
+ inkscape:connector-curvature="0"
+ id="path6755"
+ d="M 0,6000 0,0 l 5660,0 0,6000 -5660,0 z m 4786.76,-102.89 103.92,0 0,56.69 -103.92,0 0,0 85.03,-28.35 -85.03,-28.34 z" /></clipPath></defs><g
transform="matrix(1.25,0,0,-1.25,-1.0537,746.57119)"
inkscape:label="fieldseq_tb"
inkscape:groupmode="layer"
@@ -2446,13 +2446,13 @@
transform="scale(0.1,0.1)"
id="g6749"
style=""><g
- id="g6751"
- clip-path="url(#clipPath6753)"
- style=""><path
- d="m 3778.18,5925.45 1105.42,0"
- style="fill:none;stroke:#000000;stroke-width:14.17199993;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- id="path6757"
- inkscape:connector-curvature="0" /></g></g><path
+ id="g6751"
+ clip-path="url(#clipPath6753)"
+ style=""><path
+ d="m 3778.18,5925.45 1105.42,0"
+ style="fill:none;stroke:#000000;stroke-width:14.17199993;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ id="path6757"
+ inkscape:connector-curvature="0" /></g></g><path
d="m 478.676,589.711 8.503,2.834 -8.503,2.835 0,-5.669"
style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
id="path6759"
@@ -2466,142 +2466,145 @@
id="text6765"
style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan6767"
- sodipodi:role="line"
- y="-528.771"
- x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 88.500237 97.835464">V4L2_FIELD_TOP</tspan><tspan
- id="tspan6769"
- sodipodi:role="line"
- y="-460.74561"
- x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 98.507408 105.83879 113.17018 122.5054">V4L2_FIELD_BOTTOM</tspan><tspan
- id="tspan6771"
- sodipodi:role="line"
- y="-392.72021"
- x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 95.843628 103.17502 111.17835 119.84163 128.5049 136.50824 143.83963">V4L2_FIELD_ALTERNATE</tspan></text>
+ id="tspan6767"
+ sodipodi:role="line"
+ y="-528.771"
+ x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 88.500237 97.835464">V4L2_FIELD_TOP</tspan><tspan
+ id="tspan6769"
+ sodipodi:role="line"
+ y="-460.74561"
+ x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 98.507408 105.83879 113.17018 122.5054">V4L2_FIELD_BOTTOM</tspan><tspan
+ id="tspan6771"
+ sodipodi:role="line"
+ y="-392.72021"
+ x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 95.843628 103.17502 111.17835 119.84163 128.5049 136.50824 143.83963">V4L2_FIELD_ALTERNATE</tspan></text>
<text
y="-324.69479"
x="10.05469"
id="text6773"
style="font-variant:normal;font-weight:normal;font-size:8.2495203px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan6775"
- sodipodi:role="line"
- y="-324.69479"
- x="10.05469 14.17945 18.766184 20.597576 25.184309 29.771042 34.357777 38.944508 41.237877 43.531242 48.117977 50.865067 53.158432 55.451801 57.283192 61.869926 63.701321 68.288048">v4l2_buffer.field:</tspan><tspan
- id="tspan6777"
- sodipodi:role="line"
- y="-311.9397"
- x="10.05469 15.55712 20.143852 24.730585 29.317318 33.904053 38.944508 41.237877 46.740307 51.327042 57.283192 61.869926 66.910378 73.328506 95.0867 100.58913 105.17586 109.7626 114.34933 118.93606 123.97652 126.26987 131.77232 136.35905 142.3152 146.90193 152.40436 158.82249 163.86295 168.9034 175.32153 197.12534 202.62778 207.21451 211.80124 216.38797 220.9747 226.01515 228.30853 233.81096 238.39769 244.35384 248.94058 253.98103 260.39917 282.15695 287.65936 292.24609 296.83282 301.41956 306.00629 311.04675 313.34012 318.84256 323.42929 329.38544 333.97217 339.47461 345.89273 350.9332 355.97363 362.39175 384.19559 389.698 394.28473 398.87149 403.45822 408.04495 413.08539 415.37875 420.8812 425.46793 431.42407 436.0108 441.05127 447.46939 469.2276 474.73001 479.31674 483.90347 488.49023 493.07697 498.1174 500.41077 505.91321 510.49994 516.45612 521.04285 526.54523 532.96338 538.00385 543.04431 549.4624">V4L2_FIELD_TOPV4L2_FIELD_BOTTOMV4L2_FIELD_TOPV4L2_FIELD_BOTTOMV4L2_FIELD_TOPV4L2_FIELD_BOTTOM</tspan></text>
+ id="tspan6775"
+ sodipodi:role="line"
+ y="-324.69479"
+ x="10.05469 14.17945 18.766184 20.597576 25.184309 29.771042 34.357777 38.944508 41.237877 43.531242 48.117977 50.865067 53.158432 55.451801 57.283192 61.869926 63.701321 68.288048">v4l2_buffer.field:</tspan><tspan
+ id="tspan6777"
+ sodipodi:role="line"
+ y="-311.9397"
+ x="10.05469 15.55712 20.143852 24.730585 29.317318 33.904053 38.944508 41.237877 46.740307 51.327042 57.283192 61.869926 66.910378 73.328506 95.0867 100.58913 105.17586 109.7626 114.34933 118.93606 123.97652 126.26987 131.77232 136.35905 142.3152 146.90193 152.40436 158.82249 163.86295 168.9034 175.32153 197.12534 202.62778 207.21451 211.80124 216.38797 220.9747 226.01515 228.30853 233.81096 238.39769 244.35384 248.94058 253.98103 260.39917 282.15695 287.65936 292.24609 296.83282 301.41956 306.00629 311.04675 313.34012 318.84256 323.42929 329.38544 333.97217 339.47461 345.89273 350.9332 355.97363 362.39175 384.19559 389.698 394.28473 398.87149 403.45822 408.04495 413.08539 415.37875 420.8812 425.46793 431.42407 436.0108 441.05127 447.46939 469.2276 474.73001 479.31674 483.90347 488.49023 493.07697 498.1174 500.41077 505.91321 510.49994 516.45612 521.04285 526.54523 532.96338
+538.00385 543.04431 549.4624">V4L2_FIELD_TOPV4L2_FIELD_BOTTOMV4L2_FIELD_TOPV4L2_FIELD_BOTTOMV4L2_FIELD_TOPV4L2_FIELD_BOTTOM</tspan></text>
<text
y="-588.2937"
x="5.8031301"
id="text6779"
style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan6781"
- sodipodi:role="line"
- y="-588.2937"
- x="5.8031301 13.134519 19.805964 29.801128 36.472572 43.14402 47.139687 53.811131 56.474907 59.810631 66.482071 70.477737 77.149185 83.820625 87.816299 91.152016 94.48774 97.823463 104.4949 111.16635 114.50207 117.83779 120.50157 127.17302 129.83679 136.50824 139.84396 143.17969 145.84346 149.83913 155.83862 159.17435 162.51007 165.84579 169.84146 176.51291 183.18434 189.18385 199.17902 201.84279 205.17851 208.51424 215.18568 221.85713 225.19284 229.18851 235.85995 239.19568 245.86713 249.20285 252.53857 260.5419 269.87714 273.21286 281.21619 289.21951 295.89096">Temporal order, top field first transmitted (e.g. BG/PAL)</tspan><tspan
- id="tspan6783"
- sodipodi:role="line"
- y="-86.604706"
- x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 97.175514 106.51073 113.18218 120.51357">V4L2_FIELD_SEQ_TB</tspan><tspan
- id="tspan6785"
- sodipodi:role="line"
- y="-192.89471"
- x="10.05469 18.058023 24.729465 31.400909 38.072357 44.743801 52.075188 55.410912 63.414246 70.085686 78.748962 85.42041 88.756134 97.419411 104.7508 112.75413 121.41741 128.08885 136.09219 144.75546 152.7588 161.42207 168.09352 176.09685 183.42824 186.76396 190.75963 200.75479 203.41858 209.41808 216.08952 218.7533 221.41707 228.08852 234.75996 241.43141 248.10286">V4L2_FIELD_INTERLACED_BT (misaligned)</tspan><tspan
- id="tspan6787"
- sodipodi:role="line"
- y="-294.93271"
- x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 84.50457 93.167847 100.49924 108.50257 117.16585 123.83729 131.84062 140.50391 148.50723 157.17052 160.50624 163.84196 167.17769 175.18102 181.85246 188.52391 195.19534 201.86679 209.19818 212.53391 220.53723 227.20868 235.87196 242.5434 245.87912 254.5424 261.87378 269.87714 278.54041 285.21185 293.21518 301.87845 309.88177 318.54507 325.21652 332.54791">V4L2_FIELD_INTERLACED / V4L2_FIELD_INTERLACED_TB</tspan></text>
+ id="tspan6781"
+ sodipodi:role="line"
+ y="-588.2937"
+ x="5.8031301 13.134519 19.805964 29.801128 36.472572 43.14402 47.139687 53.811131 56.474907 59.810631 66.482071 70.477737 77.149185 83.820625 87.816299 91.152016 94.48774 97.823463 104.4949 111.16635 114.50207 117.83779 120.50157 127.17302 129.83679 136.50824 139.84396 143.17969 145.84346 149.83913 155.83862 159.17435 162.51007 165.84579 169.84146 176.51291 183.18434 189.18385 199.17902 201.84279 205.17851 208.51424 215.18568 221.85713 225.19284 229.18851 235.85995 239.19568 245.86713 249.20285 252.53857 260.5419 269.87714 273.21286 281.21619 289.21951 295.89096">Temporal order, top field first transmitted (e.g. BG/PAL)</tspan><tspan
+ id="tspan6783"
+ sodipodi:role="line"
+ y="-86.604706"
+ x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 97.175514 106.51073 113.18218 120.51357">V4L2_FIELD_SEQ_TB</tspan><tspan
+ id="tspan6785"
+ sodipodi:role="line"
+ y="-192.89471"
+ x="10.05469 18.058023 24.729465 31.400909 38.072357 44.743801 52.075188 55.410912 63.414246 70.085686 78.748962 85.42041 88.756134 97.419411 104.7508 112.75413 121.41741 128.08885 136.09219 144.75546 152.7588 161.42207 168.09352 176.09685 183.42824 186.76396 190.75963 200.75479 203.41858 209.41808 216.08952 218.7533 221.41707 228.08852 234.75996 241.43141 248.10286">V4L2_FIELD_INTERLACED_BT (misaligned)</tspan><tspan
+ id="tspan6787"
+ sodipodi:role="line"
+ y="-294.93271"
+ x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 84.50457 93.167847 100.49924 108.50257 117.16585 123.83729 131.84062 140.50391 148.50723 157.17052 160.50624 163.84196 167.17769 175.18102 181.85246 188.52391 195.19534 201.86679 209.19818 212.53391 220.53723 227.20868 235.87196 242.5434 245.87912 254.5424 261.87378 269.87714 278.54041 285.21185 293.21518 301.87845 309.88177 318.54507 325.21652 332.54791">V4L2_FIELD_INTERLACED / V4L2_FIELD_INTERLACED_TB</tspan></text>
<text
y="-528.771"
x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 88.500237 97.835464"
id="text4583"
style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan4585"
- sodipodi:role="line"
- y="-528.771"
- x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 88.500237 97.835464">V4L2_FIELD_TOP</tspan></text>
+ id="tspan4585"
+ sodipodi:role="line"
+ y="-528.771"
+ x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 88.500237 97.835464">V4L2_FIELD_TOP</tspan></text>
<text
y="-460.74561"
x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 98.507408 105.83879 113.17018 122.5054"
id="text4587"
style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan4589"
- sodipodi:role="line"
- y="-460.74561"
- x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 98.507408 105.83879 113.17018 122.5054">V4L2_FIELD_BOTTOM</tspan></text>
+ id="tspan4589"
+ sodipodi:role="line"
+ y="-460.74561"
+ x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 98.507408 105.83879 113.17018 122.5054">V4L2_FIELD_BOTTOM</tspan></text>
<text
y="-392.72021"
x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 95.843628 103.17502 111.17835 119.84163 128.5049 136.50824 143.83963"
id="text4591"
style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan4593"
- sodipodi:role="line"
- y="-392.72021"
- x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 95.843628 103.17502 111.17835 119.84163 128.5049 136.50824 143.83963">V4L2_FIELD_ALTERNATE</tspan></text>
+ id="tspan4593"
+ sodipodi:role="line"
+ y="-392.72021"
+ x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 95.843628 103.17502 111.17835 119.84163 128.5049 136.50824 143.83963">V4L2_FIELD_ALTERNATE</tspan></text>
<text
y="-588.2937"
x="5.8031301 13.134519 19.805964 29.801128 36.472572 43.14402 47.139687 53.811131 56.474907 59.810631 66.482071 70.477737 77.149185 83.820625 87.816299 91.152016 94.48774 97.823463 104.4949 111.16635 114.50207 117.83779 120.50157 127.17302 129.83679 136.50824 139.84396 143.17969 145.84346 149.83913 155.83862 159.17435 162.51007 165.84579 169.84146 176.51291 183.18434 189.18385 199.17902 201.84279 205.17851 208.51424 215.18568 221.85713 225.19284 229.18851 235.85995 239.19568 245.86713 249.20285 252.53857 260.5419 269.87714 273.21286 281.21619 289.21951 295.89096"
id="text5847"
style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan5849"
- sodipodi:role="line"
- y="-588.2937"
- x="5.8031301 13.134519 19.805964 29.801128 36.472572 43.14402 47.139687 53.811131 56.474907 59.810631 66.482071 70.477737 77.149185 83.820625 87.816299 91.152016 94.48774 97.823463 104.4949 111.16635 114.50207 117.83779 120.50157 127.17302 129.83679 136.50824 139.84396 143.17969 145.84346 149.83913 155.83862 159.17435 162.51007 165.84579 169.84146 176.51291 183.18434 189.18385 199.17902 201.84279 205.17851 208.51424 215.18568 221.85713 225.19284 229.18851 235.85995 239.19568 245.86713 249.20285 252.53857 260.5419 269.87714 273.21286 281.21619 289.21951 295.89096">Temporal order, top field first transmitted (e.g. BG/PAL)</tspan></text>
+ id="tspan5849"
+ sodipodi:role="line"
+ y="-588.2937"
+ x="5.8031301 13.134519 19.805964 29.801128 36.472572 43.14402 47.139687 53.811131 56.474907 59.810631 66.482071 70.477737 77.149185 83.820625 87.816299 91.152016 94.48774 97.823463 104.4949 111.16635 114.50207 117.83779 120.50157 127.17302 129.83679 136.50824 139.84396 143.17969 145.84346 149.83913 155.83862 159.17435 162.51007 165.84579 169.84146 176.51291 183.18434 189.18385 199.17902 201.84279 205.17851 208.51424 215.18568 221.85713 225.19284 229.18851 235.85995 239.19568 245.86713 249.20285 252.53857 260.5419 269.87714 273.21286 281.21619 289.21951 295.89096">Temporal order, top field first transmitted (e.g. BG/PAL)</tspan></text>
<text
y="-86.604706"
x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 97.175514 106.51073 113.18218 120.51357"
id="text5851"
style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan5853"
- sodipodi:role="line"
- y="-86.604706"
- x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 97.175514 106.51073 113.18218 120.51357">V4L2_FIELD_SEQ_TB</tspan></text>
+ id="tspan5853"
+ sodipodi:role="line"
+ y="-86.604706"
+ x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 89.17218 97.175514 106.51073 113.18218 120.51357">V4L2_FIELD_SEQ_TB</tspan></text>
<text
y="-192.89471"
x="10.05469 18.058023 24.729465 31.400909 38.072357 44.743801 52.075188 55.410912 63.414246 70.085686 78.748962 85.42041 88.756134 97.419411 104.7508 112.75413 121.41741 128.08885 136.09219 144.75546 152.7588 161.42207 168.09352 176.09685 183.42824 186.76396 190.75963 200.75479 203.41858 209.41808 216.08952 218.7533 221.41707 228.08852 234.75996 241.43141 248.10286"
id="text5855"
style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan5857"
- sodipodi:role="line"
- y="-192.89471"
- x="10.05469 18.058023 24.729465 31.400909 38.072357 44.743801 52.075188 55.410912 63.414246 70.085686 78.748962 85.42041 88.756134 97.419411 104.7508 112.75413 121.41741 128.08885 136.09219 144.75546 152.7588 161.42207 168.09352 176.09685 183.42824 186.76396 190.75963 200.75479 203.41858 209.41808 216.08952 218.7533 221.41707 228.08852 234.75996 241.43141 248.10286">V4L2_FIELD_INTERLACED_BT (misaligned)</tspan></text>
+ id="tspan5857"
+ sodipodi:role="line"
+ y="-192.89471"
+ x="10.05469 18.058023 24.729465 31.400909 38.072357 44.743801 52.075188 55.410912 63.414246 70.085686 78.748962 85.42041 88.756134 97.419411 104.7508 112.75413 121.41741 128.08885 136.09219 144.75546 152.7588 161.42207 168.09352 176.09685 183.42824 186.76396 190.75963 200.75479 203.41858 209.41808 216.08952 218.7533 221.41707 228.08852 234.75996 241.43141 248.10286">V4L2_FIELD_INTERLACED_BT (misaligned)</tspan></text>
<text
y="-294.93271"
x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 84.50457 93.167847 100.49924 108.50257 117.16585 123.83729 131.84062 140.50391 148.50723 157.17052 160.50624 163.84196 167.17769 175.18102 181.85246 188.52391 195.19534 201.86679 209.19818 212.53391 220.53723 227.20868 235.87196 242.5434 245.87912 254.5424 261.87378 269.87714 278.54041 285.21185 293.21518 301.87845 309.88177 318.54507 325.21652 332.54791"
id="text5859"
style="font-variant:normal;font-weight:normal;font-size:11.9989996px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan5861"
- sodipodi:role="line"
- y="-294.93271"
- x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 84.50457 93.167847 100.49924 108.50257 117.16585 123.83729 131.84062 140.50391 148.50723 157.17052 160.50624 163.84196 167.17769 175.18102 181.85246 188.52391 195.19534 201.86679 209.19818 212.53391 220.53723 227.20868 235.87196 242.5434 245.87912 254.5424 261.87378 269.87714 278.54041 285.21185 293.21518 301.87845 309.88177 318.54507 325.21652 332.54791">V4L2_FIELD_INTERLACED / V4L2_FIELD_INTERLACED_TB</tspan></text>
+ id="tspan5861"
+ sodipodi:role="line"
+ y="-294.93271"
+ x="5.8031301 13.806463 20.477907 27.149351 33.820797 40.492241 47.823627 51.159351 59.162685 65.834129 74.497406 81.168854 84.50457 93.167847 100.49924 108.50257 117.16585 123.83729 131.84062 140.50391 148.50723 157.17052 160.50624 163.84196 167.17769 175.18102 181.85246 188.52391 195.19534 201.86679 209.19818 212.53391 220.53723 227.20868 235.87196 242.5434 245.87912 254.5424 261.87378 269.87714 278.54041 285.21185 293.21518 301.87845 309.88177 318.54507 325.21652 332.54791">V4L2_FIELD_INTERLACED / V4L2_FIELD_INTERLACED_TB</tspan></text>
<text
y="-324.69479"
x="10.05469 14.17945 18.766184 20.597576 25.184309 29.771042 34.357777 38.944508 41.237877 43.531242 48.117977 50.865067 53.158432 55.451801 57.283192 61.869926 63.701321 68.288048"
id="text7131"
style="font-variant:normal;font-weight:normal;font-size:8.2495203px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan7133"
- sodipodi:role="line"
- y="-324.69479"
- x="10.05469 14.17945 18.766184 20.597576 25.184309 29.771042 34.357777 38.944508 41.237877 43.531242 48.117977 50.865067 53.158432 55.451801 57.283192 61.869926 63.701321 68.288048">v4l2_buffer.field:</tspan></text>
+ id="tspan7133"
+ sodipodi:role="line"
+ y="-324.69479"
+ x="10.05469 14.17945 18.766184 20.597576 25.184309 29.771042 34.357777 38.944508 41.237877 43.531242 48.117977 50.865067 53.158432 55.451801 57.283192 61.869926 63.701321 68.288048">v4l2_buffer.field:</tspan></text>
<text
y="-311.9397"
- x="10.05469 15.55712 20.143852 24.730585 29.317318 33.904053 38.944508 41.237877 46.740307 51.327042 57.283192 61.869926 66.910378 73.328506 95.0867 100.58913 105.17586 109.7626 114.34933 118.93606 123.97652 126.26987 131.77232 136.35905 142.3152 146.90193 152.40436 158.82249 163.86295 168.9034 175.32153 197.12534 202.62778 207.21451 211.80124 216.38797 220.9747 226.01515 228.30853 233.81096 238.39769 244.35384 248.94058 253.98103 260.39917 282.15695 287.65936 292.24609 296.83282 301.41956 306.00629 311.04675 313.34012 318.84256 323.42929 329.38544 333.97217 339.47461 345.89273 350.9332 355.97363 362.39175 384.19559 389.698 394.28473 398.87149 403.45822 408.04495 413.08539 415.37875 420.8812 425.46793 431.42407 436.0108 441.05127 447.46939 469.2276 474.73001 479.31674 483.90347 488.49023 493.07697 498.1174 500.41077 505.91321 510.49994 516.45612 521.04285 526.54523 532.96338 538.00385 543.04431 549.4624"
+ x="10.05469 15.55712 20.143852 24.730585 29.317318 33.904053 38.944508 41.237877 46.740307 51.327042 57.283192 61.869926 66.910378 73.328506 95.0867 100.58913 105.17586 109.7626 114.34933 118.93606 123.97652 126.26987 131.77232 136.35905 142.3152 146.90193 152.40436 158.82249 163.86295 168.9034 175.32153 197.12534 202.62778 207.21451 211.80124 216.38797 220.9747 226.01515 228.30853 233.81096 238.39769 244.35384 248.94058 253.98103 260.39917 282.15695 287.65936 292.24609 296.83282 301.41956 306.00629 311.04675 313.34012 318.84256 323.42929 329.38544 333.97217 339.47461 345.89273 350.9332 355.97363 362.39175 384.19559 389.698 394.28473 398.87149 403.45822 408.04495 413.08539 415.37875 420.8812 425.46793 431.42407 436.0108 441.05127 447.46939 469.2276 474.73001 479.31674 483.90347 488.49023 493.07697 498.1174 500.41077 505.91321 510.49994 516.45612 521.04285 526.54523 532.96338
+538.00385 543.04431 549.4624"
id="text7135"
style="font-variant:normal;font-weight:normal;font-size:8.2495203px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan7137"
- sodipodi:role="line"
- y="-311.9397"
- x="10.05469 15.55712 20.143852 24.730585 29.317318 33.904053 38.944508 41.237877 46.740307 51.327042 57.283192 61.869926 66.910378 73.328506 95.0867 100.58913 105.17586 109.7626 114.34933 118.93606 123.97652 126.26987 131.77232 136.35905 142.3152 146.90193 152.40436 158.82249 163.86295 168.9034 175.32153 197.12534 202.62778 207.21451 211.80124 216.38797 220.9747 226.01515 228.30853 233.81096 238.39769 244.35384 248.94058 253.98103 260.39917 282.15695 287.65936 292.24609 296.83282 301.41956 306.00629 311.04675 313.34012 318.84256 323.42929 329.38544 333.97217 339.47461 345.89273 350.9332 355.97363 362.39175 384.19559 389.698 394.28473 398.87149 403.45822 408.04495 413.08539 415.37875 420.8812 425.46793 431.42407 436.0108 441.05127 447.46939 469.2276 474.73001 479.31674 483.90347 488.49023 493.07697 498.1174 500.41077 505.91321 510.49994 516.45612 521.04285 526.54523 532.96338 538.00385 543.04431 549.4624">V4L2_FIELD_TOPV4L2_FIELD_BOTTOMV4L2_FIELD_TOPV4L2_FIELD_BOTTOMV4L2_FIELD_TOPV4L2_FIELD_BOTTOM</tspan></text>
+ id="tspan7137"
+ sodipodi:role="line"
+ y="-311.9397"
+ x="10.05469 15.55712 20.143852 24.730585 29.317318 33.904053 38.944508 41.237877 46.740307 51.327042 57.283192 61.869926 66.910378 73.328506 95.0867 100.58913 105.17586 109.7626 114.34933 118.93606 123.97652 126.26987 131.77232 136.35905 142.3152 146.90193 152.40436 158.82249 163.86295 168.9034 175.32153 197.12534 202.62778 207.21451 211.80124 216.38797 220.9747 226.01515 228.30853 233.81096 238.39769 244.35384 248.94058 253.98103 260.39917 282.15695 287.65936 292.24609 296.83282 301.41956 306.00629 311.04675 313.34012 318.84256 323.42929 329.38544 333.97217 339.47461 345.89273 350.9332 355.97363 362.39175 384.19559 389.698 394.28473 398.87149 403.45822 408.04495 413.08539 415.37875 420.8812 425.46793 431.42407 436.0108 441.05127 447.46939 469.2276 474.73001 479.31674 483.90347 488.49023 493.07697 498.1174 500.41077 505.91321 510.49994 516.45612 521.04285 526.54523 532.96338
+538.00385 543.04431 549.4624">V4L2_FIELD_TOPV4L2_FIELD_BOTTOMV4L2_FIELD_TOPV4L2_FIELD_BOTTOMV4L2_FIELD_TOPV4L2_FIELD_BOTTOM</tspan></text>
</g></svg>
\ No newline at end of file
diff --git a/Documentation/media/uapi/v4l/nv12mt.svg b/Documentation/media/uapi/v4l/nv12mt.svg
index 21fcccd..65d0560 100644
--- a/Documentation/media/uapi/v4l/nv12mt.svg
+++ b/Documentation/media/uapi/v4l/nv12mt.svg
@@ -18,8 +18,8 @@
sodipodi:docname="nv12mt.svg"
style="fill-rule:evenodd;stroke-width:28.22200012;stroke-linejoin:round"><metadata
id="metadata383"><rdf:RDF><cc:Work
- rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
- rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title></dc:title></cc:Work></rdf:RDF></metadata><sodipodi:namedview
+ rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
+ rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title></dc:title></cc:Work></rdf:RDF></metadata><sodipodi:namedview
pagecolor="#ffffff"
bordercolor="#666666"
borderopacity="1"
@@ -47,11 +47,11 @@
id="defs4"><clipPath
id="presentation_clip_path"
clipPathUnits="userSpaceOnUse"><rect
- x="0"
- y="0"
- width="28000"
- height="21000"
- id="rect7" /></clipPath></defs><defs
+ x="0"
+ y="0"
+ width="28000"
+ height="21000"
+ id="rect7" /></clipPath></defs><defs
id="defs9" /><defs
id="defs80" /><defs
id="defs103" /><defs
@@ -65,386 +65,386 @@
id="g177"
transform="translate(-3285.889,-3185.889)"><g
id="g179"><g
- id="id1"
- class="Slide"
- clip-path="url(#presentation_clip_path)"><g
- class="Page"
- id="g182"><g
- class="com.sun.star.drawing.CustomShape"
- id="g184"><g
- id="id6"><rect
- class="BoundingBox"
- x="3299"
- y="3199"
- width="2403"
- height="1403"
- id="rect187"
- style="fill:none;stroke:none" /><path
- d="m 4500,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path189"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text191"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan193"
- style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
- class="TextPosition"
- x="4325"
- y="4121"
- id="tspan195"><tspan
- id="tspan197"
- style="fill:#000000;stroke:none">0</tspan></tspan></tspan></text>
+ id="id1"
+ class="Slide"
+ clip-path="url(#presentation_clip_path)"><g
+ class="Page"
+ id="g182"><g
+ class="com.sun.star.drawing.CustomShape"
+ id="g184"><g
+ id="id6"><rect
+ class="BoundingBox"
+ x="3299"
+ y="3199"
+ width="2403"
+ height="1403"
+ id="rect187"
+ style="fill:none;stroke:none" /><path
+ d="m 4500,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path189"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /><text
+ class="TextShape"
+ id="text191"><tspan
+ class="TextParagraph"
+ font-size="635px"
+ font-weight="400"
+ id="tspan193"
+ style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+ class="TextPosition"
+ x="4325"
+ y="4121"
+ id="tspan195"><tspan
+ id="tspan197"
+ style="fill:#000000;stroke:none">0</tspan></tspan></tspan></text>
</g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g199"><g
- id="id7"><rect
- class="BoundingBox"
- x="5699"
- y="3199"
- width="2403"
- height="1403"
- id="rect202"
- style="fill:none;stroke:none" /><path
- d="m 6900,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path204"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /></g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g206"><g
- id="id8"><rect
- class="BoundingBox"
- x="8099"
- y="3199"
- width="2403"
- height="1403"
- id="rect209"
- style="fill:none;stroke:none" /><path
- d="m 9300,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path211"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text213"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan215"
- style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
- class="TextPosition"
- x="9125"
- y="4121"
- id="tspan217"><tspan
- id="tspan219"
- style="fill:#000000;stroke:none">6</tspan></tspan></tspan></text>
+ class="com.sun.star.drawing.CustomShape"
+ id="g199"><g
+ id="id7"><rect
+ class="BoundingBox"
+ x="5699"
+ y="3199"
+ width="2403"
+ height="1403"
+ id="rect202"
+ style="fill:none;stroke:none" /><path
+ d="m 6900,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path204"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /></g></g><g
+ class="com.sun.star.drawing.CustomShape"
+ id="g206"><g
+ id="id8"><rect
+ class="BoundingBox"
+ x="8099"
+ y="3199"
+ width="2403"
+ height="1403"
+ id="rect209"
+ style="fill:none;stroke:none" /><path
+ d="m 9300,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path211"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /><text
+ class="TextShape"
+ id="text213"><tspan
+ class="TextParagraph"
+ font-size="635px"
+ font-weight="400"
+ id="tspan215"
+ style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+ class="TextPosition"
+ x="9125"
+ y="4121"
+ id="tspan217"><tspan
+ id="tspan219"
+ style="fill:#000000;stroke:none">6</tspan></tspan></tspan></text>
</g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g221"><g
- id="id9"><rect
- class="BoundingBox"
- x="5699"
- y="3199"
- width="2403"
- height="1403"
- id="rect224"
- style="fill:none;stroke:none" /><path
- d="m 6900,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path226"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text228"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan230"
- style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
- class="TextPosition"
- x="6725"
- y="4121"
- id="tspan232"><tspan
- id="tspan234"
- style="fill:#000000;stroke:none">1</tspan></tspan></tspan></text>
+ class="com.sun.star.drawing.CustomShape"
+ id="g221"><g
+ id="id9"><rect
+ class="BoundingBox"
+ x="5699"
+ y="3199"
+ width="2403"
+ height="1403"
+ id="rect224"
+ style="fill:none;stroke:none" /><path
+ d="m 6900,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path226"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /><text
+ class="TextShape"
+ id="text228"><tspan
+ class="TextParagraph"
+ font-size="635px"
+ font-weight="400"
+ id="tspan230"
+ style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+ class="TextPosition"
+ x="6725"
+ y="4121"
+ id="tspan232"><tspan
+ id="tspan234"
+ style="fill:#000000;stroke:none">1</tspan></tspan></tspan></text>
</g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g236"><g
- id="id10"><rect
- class="BoundingBox"
- x="10499"
- y="3199"
- width="2403"
- height="1403"
- id="rect239"
- style="fill:none;stroke:none" /><path
- d="m 11700,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path241"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text243"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan245"
- style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
- class="TextPosition"
- x="11525"
- y="4121"
- id="tspan247"><tspan
- id="tspan249"
- style="fill:#000000;stroke:none">7</tspan></tspan></tspan></text>
+ class="com.sun.star.drawing.CustomShape"
+ id="g236"><g
+ id="id10"><rect
+ class="BoundingBox"
+ x="10499"
+ y="3199"
+ width="2403"
+ height="1403"
+ id="rect239"
+ style="fill:none;stroke:none" /><path
+ d="m 11700,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path241"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /><text
+ class="TextShape"
+ id="text243"><tspan
+ class="TextParagraph"
+ font-size="635px"
+ font-weight="400"
+ id="tspan245"
+ style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+ class="TextPosition"
+ x="11525"
+ y="4121"
+ id="tspan247"><tspan
+ id="tspan249"
+ style="fill:#000000;stroke:none">7</tspan></tspan></tspan></text>
</g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g251"><g
- id="id11"><rect
- class="BoundingBox"
- x="3299"
- y="4599"
- width="2403"
- height="1403"
- id="rect254"
- style="fill:none;stroke:none" /><path
- d="m 4500,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path256"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text258"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan260"
- style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
- class="TextPosition"
- x="4325"
- y="5521"
- id="tspan262"><tspan
- id="tspan264"
- style="fill:#000000;stroke:none">2</tspan></tspan></tspan></text>
+ class="com.sun.star.drawing.CustomShape"
+ id="g251"><g
+ id="id11"><rect
+ class="BoundingBox"
+ x="3299"
+ y="4599"
+ width="2403"
+ height="1403"
+ id="rect254"
+ style="fill:none;stroke:none" /><path
+ d="m 4500,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path256"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /><text
+ class="TextShape"
+ id="text258"><tspan
+ class="TextParagraph"
+ font-size="635px"
+ font-weight="400"
+ id="tspan260"
+ style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+ class="TextPosition"
+ x="4325"
+ y="5521"
+ id="tspan262"><tspan
+ id="tspan264"
+ style="fill:#000000;stroke:none">2</tspan></tspan></tspan></text>
</g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g266"><g
- id="id12"><rect
- class="BoundingBox"
- x="5699"
- y="4599"
- width="2403"
- height="1403"
- id="rect269"
- style="fill:none;stroke:none" /><path
- d="m 6900,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path271"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /></g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g273"><g
- id="id13"><rect
- class="BoundingBox"
- x="8099"
- y="4599"
- width="2403"
- height="1403"
- id="rect276"
- style="fill:none;stroke:none" /><path
- d="m 9300,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path278"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text280"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan282"
- style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
- class="TextPosition"
- x="9125"
- y="5521"
- id="tspan284"><tspan
- id="tspan286"
- style="fill:#000000;stroke:none">4</tspan></tspan></tspan></text>
+ class="com.sun.star.drawing.CustomShape"
+ id="g266"><g
+ id="id12"><rect
+ class="BoundingBox"
+ x="5699"
+ y="4599"
+ width="2403"
+ height="1403"
+ id="rect269"
+ style="fill:none;stroke:none" /><path
+ d="m 6900,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path271"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /></g></g><g
+ class="com.sun.star.drawing.CustomShape"
+ id="g273"><g
+ id="id13"><rect
+ class="BoundingBox"
+ x="8099"
+ y="4599"
+ width="2403"
+ height="1403"
+ id="rect276"
+ style="fill:none;stroke:none" /><path
+ d="m 9300,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path278"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /><text
+ class="TextShape"
+ id="text280"><tspan
+ class="TextParagraph"
+ font-size="635px"
+ font-weight="400"
+ id="tspan282"
+ style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+ class="TextPosition"
+ x="9125"
+ y="5521"
+ id="tspan284"><tspan
+ id="tspan286"
+ style="fill:#000000;stroke:none">4</tspan></tspan></tspan></text>
</g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g288"><g
- id="id14"><rect
- class="BoundingBox"
- x="5699"
- y="4599"
- width="2403"
- height="1403"
- id="rect291"
- style="fill:none;stroke:none" /><path
- d="m 6900,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path293"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text295"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan297"
- style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
- class="TextPosition"
- x="6725"
- y="5521"
- id="tspan299"><tspan
- id="tspan301"
- style="fill:#000000;stroke:none">3</tspan></tspan></tspan></text>
+ class="com.sun.star.drawing.CustomShape"
+ id="g288"><g
+ id="id14"><rect
+ class="BoundingBox"
+ x="5699"
+ y="4599"
+ width="2403"
+ height="1403"
+ id="rect291"
+ style="fill:none;stroke:none" /><path
+ d="m 6900,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path293"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /><text
+ class="TextShape"
+ id="text295"><tspan
+ class="TextParagraph"
+ font-size="635px"
+ font-weight="400"
+ id="tspan297"
+ style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+ class="TextPosition"
+ x="6725"
+ y="5521"
+ id="tspan299"><tspan
+ id="tspan301"
+ style="fill:#000000;stroke:none">3</tspan></tspan></tspan></text>
</g></g><g
- class="com.sun.star.drawing.CustomShape"
- id="g303"><g
- id="id15"><rect
- class="BoundingBox"
- x="10499"
- y="4599"
- width="2403"
- height="1403"
- id="rect306"
- style="fill:none;stroke:none" /><path
- d="m 11700,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path308"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text310"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan312"
- style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
- class="TextPosition"
- x="11525"
- y="5521"
- id="tspan314"><tspan
- id="tspan316"
- style="fill:#000000;stroke:none">5</tspan></tspan></tspan></text>
+ class="com.sun.star.drawing.CustomShape"
+ id="g303"><g
+ id="id15"><rect
+ class="BoundingBox"
+ x="10499"
+ y="4599"
+ width="2403"
+ height="1403"
+ id="rect306"
+ style="fill:none;stroke:none" /><path
+ d="m 11700,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path308"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /><text
+ class="TextShape"
+ id="text310"><tspan
+ class="TextParagraph"
+ font-size="635px"
+ font-weight="400"
+ id="tspan312"
+ style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+ class="TextPosition"
+ x="11525"
+ y="5521"
+ id="tspan314"><tspan
+ id="tspan316"
+ style="fill:#000000;stroke:none">5</tspan></tspan></tspan></text>
</g></g><g
- class="com.sun.star.drawing.LineShape"
- id="g318"><g
- id="id16"><rect
- class="BoundingBox"
- x="5199"
- y="3850"
- width="1402"
- height="301"
- id="rect321"
- style="fill:none;stroke:none" /><path
- d="m 5200,4000 970,0"
- id="path323"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff3333" /><path
- d="m 6600,4000 -450,-150 0,300 450,-150 z"
- id="path325"
- inkscape:connector-curvature="0"
- style="fill:#ff3333;stroke:none" /></g></g><g
- class="com.sun.star.drawing.LineShape"
- id="g327"><g
- id="id17"><rect
- class="BoundingBox"
- x="5000"
- y="4299"
- width="1202"
- height="802"
- id="rect330"
- style="fill:none;stroke:none" /><path
- d="m 6200,4300 -842,561"
- id="path332"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff3333" /><path
- d="m 5000,5100 458,-125 -167,-249 -291,374 z"
- id="path334"
- inkscape:connector-curvature="0"
- style="fill:#ff3333;stroke:none" /></g></g><g
- class="com.sun.star.drawing.LineShape"
- id="g336"><g
- id="id18"><rect
- class="BoundingBox"
- x="5399"
- y="5250"
- width="1202"
- height="301"
- id="rect339"
- style="fill:none;stroke:none" /><path
- d="m 5400,5400 770,0"
- id="path341"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff3333" /><path
- d="m 6600,5400 -450,-150 0,300 450,-150 z"
- id="path343"
- inkscape:connector-curvature="0"
- style="fill:#ff3333;stroke:none" /></g></g><g
- class="com.sun.star.drawing.LineShape"
- id="g345"><g
- id="id19"><rect
- class="BoundingBox"
- x="7599"
- y="5250"
- width="1202"
- height="301"
- id="rect348"
- style="fill:none;stroke:none" /><path
- d="m 7600,5400 770,0"
- id="path350"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff3333" /><path
- d="m 8800,5400 -450,-150 0,300 450,-150 z"
- id="path352"
- inkscape:connector-curvature="0"
- style="fill:#ff3333;stroke:none" /></g></g><g
- class="com.sun.star.drawing.LineShape"
- id="g354"><g
- id="id20"><rect
- class="BoundingBox"
- x="9799"
- y="5250"
- width="1402"
- height="301"
- id="rect357"
- style="fill:none;stroke:none" /><path
- d="m 9800,5400 970,0"
- id="path359"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff3333" /><path
- d="m 11200,5400 -450,-150 0,300 450,-150 z"
- id="path361"
- inkscape:connector-curvature="0"
- style="fill:#ff3333;stroke:none" /></g></g><g
- class="com.sun.star.drawing.LineShape"
- id="g363"><g
- id="id21"><rect
- class="BoundingBox"
- x="9900"
- y="4200"
- width="1202"
- height="802"
- id="rect366"
- style="fill:none;stroke:none" /><path
- d="m 11100,5000 -842,-561"
- id="path368"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff3333" /><path
- d="m 9900,4200 291,374 167,-249 -458,-125 z"
- id="path370"
- inkscape:connector-curvature="0"
- style="fill:#ff3333;stroke:none" /></g></g><g
- class="com.sun.star.drawing.LineShape"
- id="g372"><g
- id="id22"><rect
- class="BoundingBox"
- x="9999"
- y="3850"
- width="1402"
- height="301"
- id="rect375"
- style="fill:none;stroke:none" /><path
- d="m 10000,4000 970,0"
- id="path377"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff3333" /><path
- d="m 11400,4000 -450,-150 0,300 450,-150 z"
- id="path379"
- inkscape:connector-curvature="0"
- style="fill:#ff3333;stroke:none" /></g></g></g></g></g></g></svg>
+ class="com.sun.star.drawing.LineShape"
+ id="g318"><g
+ id="id16"><rect
+ class="BoundingBox"
+ x="5199"
+ y="3850"
+ width="1402"
+ height="301"
+ id="rect321"
+ style="fill:none;stroke:none" /><path
+ d="m 5200,4000 970,0"
+ id="path323"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#ff3333" /><path
+ d="m 6600,4000 -450,-150 0,300 450,-150 z"
+ id="path325"
+ inkscape:connector-curvature="0"
+ style="fill:#ff3333;stroke:none" /></g></g><g
+ class="com.sun.star.drawing.LineShape"
+ id="g327"><g
+ id="id17"><rect
+ class="BoundingBox"
+ x="5000"
+ y="4299"
+ width="1202"
+ height="802"
+ id="rect330"
+ style="fill:none;stroke:none" /><path
+ d="m 6200,4300 -842,561"
+ id="path332"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#ff3333" /><path
+ d="m 5000,5100 458,-125 -167,-249 -291,374 z"
+ id="path334"
+ inkscape:connector-curvature="0"
+ style="fill:#ff3333;stroke:none" /></g></g><g
+ class="com.sun.star.drawing.LineShape"
+ id="g336"><g
+ id="id18"><rect
+ class="BoundingBox"
+ x="5399"
+ y="5250"
+ width="1202"
+ height="301"
+ id="rect339"
+ style="fill:none;stroke:none" /><path
+ d="m 5400,5400 770,0"
+ id="path341"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#ff3333" /><path
+ d="m 6600,5400 -450,-150 0,300 450,-150 z"
+ id="path343"
+ inkscape:connector-curvature="0"
+ style="fill:#ff3333;stroke:none" /></g></g><g
+ class="com.sun.star.drawing.LineShape"
+ id="g345"><g
+ id="id19"><rect
+ class="BoundingBox"
+ x="7599"
+ y="5250"
+ width="1202"
+ height="301"
+ id="rect348"
+ style="fill:none;stroke:none" /><path
+ d="m 7600,5400 770,0"
+ id="path350"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#ff3333" /><path
+ d="m 8800,5400 -450,-150 0,300 450,-150 z"
+ id="path352"
+ inkscape:connector-curvature="0"
+ style="fill:#ff3333;stroke:none" /></g></g><g
+ class="com.sun.star.drawing.LineShape"
+ id="g354"><g
+ id="id20"><rect
+ class="BoundingBox"
+ x="9799"
+ y="5250"
+ width="1402"
+ height="301"
+ id="rect357"
+ style="fill:none;stroke:none" /><path
+ d="m 9800,5400 970,0"
+ id="path359"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#ff3333" /><path
+ d="m 11200,5400 -450,-150 0,300 450,-150 z"
+ id="path361"
+ inkscape:connector-curvature="0"
+ style="fill:#ff3333;stroke:none" /></g></g><g
+ class="com.sun.star.drawing.LineShape"
+ id="g363"><g
+ id="id21"><rect
+ class="BoundingBox"
+ x="9900"
+ y="4200"
+ width="1202"
+ height="802"
+ id="rect366"
+ style="fill:none;stroke:none" /><path
+ d="m 11100,5000 -842,-561"
+ id="path368"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#ff3333" /><path
+ d="m 9900,4200 291,374 167,-249 -458,-125 z"
+ id="path370"
+ inkscape:connector-curvature="0"
+ style="fill:#ff3333;stroke:none" /></g></g><g
+ class="com.sun.star.drawing.LineShape"
+ id="g372"><g
+ id="id22"><rect
+ class="BoundingBox"
+ x="9999"
+ y="3850"
+ width="1402"
+ height="301"
+ id="rect375"
+ style="fill:none;stroke:none" /><path
+ d="m 10000,4000 970,0"
+ id="path377"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#ff3333" /><path
+ d="m 11400,4000 -450,-150 0,300 450,-150 z"
+ id="path379"
+ inkscape:connector-curvature="0"
+ style="fill:#ff3333;stroke:none" /></g></g></g></g></g></g></svg>
diff --git a/Documentation/media/uapi/v4l/nv12mt_example.svg b/Documentation/media/uapi/v4l/nv12mt_example.svg
index d65d989..fc51fe8 100644
--- a/Documentation/media/uapi/v4l/nv12mt_example.svg
+++ b/Documentation/media/uapi/v4l/nv12mt_example.svg
@@ -18,8 +18,8 @@
sodipodi:docname="nv12mt_example.svg"
style="fill-rule:evenodd;stroke-width:28.22200012;stroke-linejoin:round"><metadata
id="metadata953"><rdf:RDF><cc:Work
- rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
- rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title></dc:title></cc:Work></rdf:RDF></metadata><sodipodi:namedview
+ rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
+ rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title></dc:title></cc:Work></rdf:RDF></metadata><sodipodi:namedview
pagecolor="#ffffff"
bordercolor="#666666"
borderopacity="1"
@@ -58,1532 +58,1532 @@
id="g188"
transform="translate(-3285.889,-3185.889)"><g
id="id6"><rect
- class="BoundingBox"
- x="3299"
- y="3199"
- width="2403"
- height="1403"
- id="rect191"
- style="fill:none;stroke:none" /><path
- d="m 4500,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path193"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text195"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan197"
- style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
- class="TextPosition"
- x="4325"
- y="4121"
- id="tspan199"><tspan
- id="tspan201"
- style="fill:#000000;stroke:none">0</tspan></tspan></tspan></text>
+ class="BoundingBox"
+ x="3299"
+ y="3199"
+ width="2403"
+ height="1403"
+ id="rect191"
+ style="fill:none;stroke:none" /><path
+ d="m 4500,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path193"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /><text
+ class="TextShape"
+ id="text195"><tspan
+ class="TextParagraph"
+ font-size="635px"
+ font-weight="400"
+ id="tspan197"
+ style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+ class="TextPosition"
+ x="4325"
+ y="4121"
+ id="tspan199"><tspan
+ id="tspan201"
+ style="fill:#000000;stroke:none">0</tspan></tspan></tspan></text>
</g></g><g
class="com.sun.star.drawing.CustomShape"
id="g203"
transform="translate(-3285.889,-3185.889)"><g
id="id7"><rect
- class="BoundingBox"
- x="5699"
- y="3199"
- width="2403"
- height="1403"
- id="rect206"
- style="fill:none;stroke:none" /><path
- d="m 6900,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path208"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /></g></g><g
+ class="BoundingBox"
+ x="5699"
+ y="3199"
+ width="2403"
+ height="1403"
+ id="rect206"
+ style="fill:none;stroke:none" /><path
+ d="m 6900,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path208"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /></g></g><g
class="com.sun.star.drawing.CustomShape"
id="g210"
transform="translate(-3285.889,-3185.889)"><g
id="id8"><rect
- class="BoundingBox"
- x="8099"
- y="3199"
- width="2403"
- height="1403"
- id="rect213"
- style="fill:none;stroke:none" /><path
- d="m 9300,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path215"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text217"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan219"
- style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
- class="TextPosition"
- x="9125"
- y="4121"
- id="tspan221"><tspan
- id="tspan223"
- style="fill:#000000;stroke:none">6</tspan></tspan></tspan></text>
+ class="BoundingBox"
+ x="8099"
+ y="3199"
+ width="2403"
+ height="1403"
+ id="rect213"
+ style="fill:none;stroke:none" /><path
+ d="m 9300,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path215"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /><text
+ class="TextShape"
+ id="text217"><tspan
+ class="TextParagraph"
+ font-size="635px"
+ font-weight="400"
+ id="tspan219"
+ style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+ class="TextPosition"
+ x="9125"
+ y="4121"
+ id="tspan221"><tspan
+ id="tspan223"
+ style="fill:#000000;stroke:none">6</tspan></tspan></tspan></text>
</g></g><g
class="com.sun.star.drawing.CustomShape"
id="g225"
transform="translate(-3285.889,-3185.889)"><g
id="id9"><rect
- class="BoundingBox"
- x="5699"
- y="3199"
- width="2403"
- height="1403"
- id="rect228"
- style="fill:none;stroke:none" /><path
- d="m 6900,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path230"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text232"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan234"
- style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
- class="TextPosition"
- x="6725"
- y="4121"
- id="tspan236"><tspan
- id="tspan238"
- style="fill:#000000;stroke:none">1</tspan></tspan></tspan></text>
+ class="BoundingBox"
+ x="5699"
+ y="3199"
+ width="2403"
+ height="1403"
+ id="rect228"
+ style="fill:none;stroke:none" /><path
+ d="m 6900,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path230"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /><text
+ class="TextShape"
+ id="text232"><tspan
+ class="TextParagraph"
+ font-size="635px"
+ font-weight="400"
+ id="tspan234"
+ style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+ class="TextPosition"
+ x="6725"
+ y="4121"
+ id="tspan236"><tspan
+ id="tspan238"
+ style="fill:#000000;stroke:none">1</tspan></tspan></tspan></text>
</g></g><g
class="com.sun.star.drawing.CustomShape"
id="g240"
transform="translate(-3285.889,-3185.889)"><g
id="id10"><rect
- class="BoundingBox"
- x="10499"
- y="3199"
- width="2403"
- height="1403"
- id="rect243"
- style="fill:none;stroke:none" /><path
- d="m 11700,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path245"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text247"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan249"
- style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
- class="TextPosition"
- x="11525"
- y="4121"
- id="tspan251"><tspan
- id="tspan253"
- style="fill:#000000;stroke:none">7</tspan></tspan></tspan></text>
+ class="BoundingBox"
+ x="10499"
+ y="3199"
+ width="2403"
+ height="1403"
+ id="rect243"
+ style="fill:none;stroke:none" /><path
+ d="m 11700,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path245"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /><text
+ class="TextShape"
+ id="text247"><tspan
+ class="TextParagraph"
+ font-size="635px"
+ font-weight="400"
+ id="tspan249"
+ style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+ class="TextPosition"
+ x="11525"
+ y="4121"
+ id="tspan251"><tspan
+ id="tspan253"
+ style="fill:#000000;stroke:none">7</tspan></tspan></tspan></text>
</g></g><g
class="com.sun.star.drawing.CustomShape"
id="g255"
transform="translate(-3285.889,-3185.889)"><g
id="id11"><rect
- class="BoundingBox"
- x="12899"
- y="3199"
- width="2403"
- height="1403"
- id="rect258"
- style="fill:none;stroke:none" /><path
- d="m 14100,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path260"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /></g></g><g
+ class="BoundingBox"
+ x="12899"
+ y="3199"
+ width="2403"
+ height="1403"
+ id="rect258"
+ style="fill:none;stroke:none" /><path
+ d="m 14100,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path260"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /></g></g><g
class="com.sun.star.drawing.CustomShape"
id="g262"
transform="translate(-3285.889,-3185.889)"><g
id="id12"><rect
- class="BoundingBox"
- x="15299"
- y="3199"
- width="2403"
- height="1403"
- id="rect265"
- style="fill:none;stroke:none" /><path
- d="m 16500,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path267"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text269"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan271"
- style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
- class="TextPosition"
- x="16325"
- y="4121"
- id="tspan273"><tspan
- id="tspan275"
- style="fill:#000000;stroke:none">9</tspan></tspan></tspan></text>
+ class="BoundingBox"
+ x="15299"
+ y="3199"
+ width="2403"
+ height="1403"
+ id="rect265"
+ style="fill:none;stroke:none" /><path
+ d="m 16500,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path267"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /><text
+ class="TextShape"
+ id="text269"><tspan
+ class="TextParagraph"
+ font-size="635px"
+ font-weight="400"
+ id="tspan271"
+ style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+ class="TextPosition"
+ x="16325"
+ y="4121"
+ id="tspan273"><tspan
+ id="tspan275"
+ style="fill:#000000;stroke:none">9</tspan></tspan></tspan></text>
</g></g><g
class="com.sun.star.drawing.CustomShape"
id="g277"
transform="translate(-3285.889,-3185.889)"><g
id="id13"><rect
- class="BoundingBox"
- x="12899"
- y="3199"
- width="2403"
- height="1403"
- id="rect280"
- style="fill:none;stroke:none" /><path
- d="m 14100,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path282"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text284"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan286"
- style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
- class="TextPosition"
- x="13925"
- y="4121"
- id="tspan288"><tspan
- id="tspan290"
- style="fill:#000000;stroke:none">8</tspan></tspan></tspan></text>
+ class="BoundingBox"
+ x="12899"
+ y="3199"
+ width="2403"
+ height="1403"
+ id="rect280"
+ style="fill:none;stroke:none" /><path
+ d="m 14100,4600 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path282"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /><text
+ class="TextShape"
+ id="text284"><tspan
+ class="TextParagraph"
+ font-size="635px"
+ font-weight="400"
+ id="tspan286"
+ style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+ class="TextPosition"
+ x="13925"
+ y="4121"
+ id="tspan288"><tspan
+ id="tspan290"
+ style="fill:#000000;stroke:none">8</tspan></tspan></tspan></text>
</g></g><g
class="com.sun.star.drawing.CustomShape"
id="g292"
transform="translate(-3285.889,-3185.889)"><g
id="id14"><rect
- class="BoundingBox"
- x="3299"
- y="4599"
- width="2403"
- height="1403"
- id="rect295"
- style="fill:none;stroke:none" /><path
- d="m 4500,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path297"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text299"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan301"
- style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
- class="TextPosition"
- x="4325"
- y="5521"
- id="tspan303"><tspan
- id="tspan305"
- style="fill:#000000;stroke:none">2</tspan></tspan></tspan></text>
+ class="BoundingBox"
+ x="3299"
+ y="4599"
+ width="2403"
+ height="1403"
+ id="rect295"
+ style="fill:none;stroke:none" /><path
+ d="m 4500,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path297"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /><text
+ class="TextShape"
+ id="text299"><tspan
+ class="TextParagraph"
+ font-size="635px"
+ font-weight="400"
+ id="tspan301"
+ style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+ class="TextPosition"
+ x="4325"
+ y="5521"
+ id="tspan303"><tspan
+ id="tspan305"
+ style="fill:#000000;stroke:none">2</tspan></tspan></tspan></text>
</g></g><g
class="com.sun.star.drawing.CustomShape"
id="g307"
transform="translate(-3285.889,-3185.889)"><g
id="id15"><rect
- class="BoundingBox"
- x="5699"
- y="4599"
- width="2403"
- height="1403"
- id="rect310"
- style="fill:none;stroke:none" /><path
- d="m 6900,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path312"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /></g></g><g
+ class="BoundingBox"
+ x="5699"
+ y="4599"
+ width="2403"
+ height="1403"
+ id="rect310"
+ style="fill:none;stroke:none" /><path
+ d="m 6900,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path312"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /></g></g><g
class="com.sun.star.drawing.CustomShape"
id="g314"
transform="translate(-3285.889,-3185.889)"><g
id="id16"><rect
- class="BoundingBox"
- x="8099"
- y="4599"
- width="2403"
- height="1403"
- id="rect317"
- style="fill:none;stroke:none" /><path
- d="m 9300,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path319"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text321"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan323"
- style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
- class="TextPosition"
- x="9125"
- y="5521"
- id="tspan325"><tspan
- id="tspan327"
- style="fill:#000000;stroke:none">4</tspan></tspan></tspan></text>
+ class="BoundingBox"
+ x="8099"
+ y="4599"
+ width="2403"
+ height="1403"
+ id="rect317"
+ style="fill:none;stroke:none" /><path
+ d="m 9300,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path319"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /><text
+ class="TextShape"
+ id="text321"><tspan
+ class="TextParagraph"
+ font-size="635px"
+ font-weight="400"
+ id="tspan323"
+ style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+ class="TextPosition"
+ x="9125"
+ y="5521"
+ id="tspan325"><tspan
+ id="tspan327"
+ style="fill:#000000;stroke:none">4</tspan></tspan></tspan></text>
</g></g><g
class="com.sun.star.drawing.CustomShape"
id="g329"
transform="translate(-3285.889,-3185.889)"><g
id="id17"><rect
- class="BoundingBox"
- x="5699"
- y="4599"
- width="2403"
- height="1403"
- id="rect332"
- style="fill:none;stroke:none" /><path
- d="m 6900,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path334"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text336"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan338"
- style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
- class="TextPosition"
- x="6725"
- y="5521"
- id="tspan340"><tspan
- id="tspan342"
- style="fill:#000000;stroke:none">3</tspan></tspan></tspan></text>
+ class="BoundingBox"
+ x="5699"
+ y="4599"
+ width="2403"
+ height="1403"
+ id="rect332"
+ style="fill:none;stroke:none" /><path
+ d="m 6900,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path334"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /><text
+ class="TextShape"
+ id="text336"><tspan
+ class="TextParagraph"
+ font-size="635px"
+ font-weight="400"
+ id="tspan338"
+ style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+ class="TextPosition"
+ x="6725"
+ y="5521"
+ id="tspan340"><tspan
+ id="tspan342"
+ style="fill:#000000;stroke:none">3</tspan></tspan></tspan></text>
</g></g><g
class="com.sun.star.drawing.CustomShape"
id="g344"
transform="translate(-3285.889,-3185.889)"><g
id="id18"><rect
- class="BoundingBox"
- x="10499"
- y="4599"
- width="2403"
- height="1403"
- id="rect347"
- style="fill:none;stroke:none" /><path
- d="m 11700,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path349"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text351"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan353"
- style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
- class="TextPosition"
- x="11525"
- y="5521"
- id="tspan355"><tspan
- id="tspan357"
- style="fill:#000000;stroke:none">5</tspan></tspan></tspan></text>
+ class="BoundingBox"
+ x="10499"
+ y="4599"
+ width="2403"
+ height="1403"
+ id="rect347"
+ style="fill:none;stroke:none" /><path
+ d="m 11700,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path349"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /><text
+ class="TextShape"
+ id="text351"><tspan
+ class="TextParagraph"
+ font-size="635px"
+ font-weight="400"
+ id="tspan353"
+ style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+ class="TextPosition"
+ x="11525"
+ y="5521"
+ id="tspan355"><tspan
+ id="tspan357"
+ style="fill:#000000;stroke:none">5</tspan></tspan></tspan></text>
</g></g><g
class="com.sun.star.drawing.CustomShape"
id="g359"
transform="translate(-3285.889,-3185.889)"><g
id="id19"><rect
- class="BoundingBox"
- x="12899"
- y="4599"
- width="2403"
- height="1403"
- id="rect362"
- style="fill:none;stroke:none" /><path
- d="m 14100,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path364"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /></g></g><g
+ class="BoundingBox"
+ x="12899"
+ y="4599"
+ width="2403"
+ height="1403"
+ id="rect362"
+ style="fill:none;stroke:none" /><path
+ d="m 14100,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path364"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /></g></g><g
class="com.sun.star.drawing.CustomShape"
id="g366"
transform="translate(-3285.889,-3185.889)"><g
id="id20"><rect
- class="BoundingBox"
- x="15299"
- y="4599"
- width="2403"
- height="1403"
- id="rect369"
- style="fill:none;stroke:none" /><path
- d="m 16500,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path371"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text373"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan375"
- style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
- class="TextPosition"
- x="16149"
- y="5521"
- id="tspan377"><tspan
- id="tspan379"
- style="fill:#000000;stroke:none">11</tspan></tspan></tspan></text>
+ class="BoundingBox"
+ x="15299"
+ y="4599"
+ width="2403"
+ height="1403"
+ id="rect369"
+ style="fill:none;stroke:none" /><path
+ d="m 16500,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path371"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /><text
+ class="TextShape"
+ id="text373"><tspan
+ class="TextParagraph"
+ font-size="635px"
+ font-weight="400"
+ id="tspan375"
+ style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+ class="TextPosition"
+ x="16149"
+ y="5521"
+ id="tspan377"><tspan
+ id="tspan379"
+ style="fill:#000000;stroke:none">11</tspan></tspan></tspan></text>
</g></g><g
class="com.sun.star.drawing.CustomShape"
id="g381"
transform="translate(-3285.889,-3185.889)"><g
id="id21"><rect
- class="BoundingBox"
- x="12899"
- y="4599"
- width="2403"
- height="1403"
- id="rect384"
- style="fill:none;stroke:none" /><path
- d="m 14100,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path386"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text388"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan390"
- style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
- class="TextPosition"
- x="13749"
- y="5521"
- id="tspan392"><tspan
- id="tspan394"
- style="fill:#000000;stroke:none">10</tspan></tspan></tspan></text>
+ class="BoundingBox"
+ x="12899"
+ y="4599"
+ width="2403"
+ height="1403"
+ id="rect384"
+ style="fill:none;stroke:none" /><path
+ d="m 14100,6000 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path386"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /><text
+ class="TextShape"
+ id="text388"><tspan
+ class="TextParagraph"
+ font-size="635px"
+ font-weight="400"
+ id="tspan390"
+ style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+ class="TextPosition"
+ x="13749"
+ y="5521"
+ id="tspan392"><tspan
+ id="tspan394"
+ style="fill:#000000;stroke:none">10</tspan></tspan></tspan></text>
</g></g><g
class="com.sun.star.drawing.CustomShape"
id="g396"
transform="translate(-3285.889,-3185.889)"><g
id="id22"><rect
- class="BoundingBox"
- x="3299"
- y="5999"
- width="2403"
- height="1403"
- id="rect399"
- style="fill:none;stroke:none" /><path
- d="m 4500,7400 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path401"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text403"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan405"
- style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
- class="TextPosition"
- x="4149"
- y="6921"
- id="tspan407"><tspan
- id="tspan409"
- style="fill:#000000;stroke:none">12</tspan></tspan></tspan></text>
+ class="BoundingBox"
+ x="3299"
+ y="5999"
+ width="2403"
+ height="1403"
+ id="rect399"
+ style="fill:none;stroke:none" /><path
+ d="m 4500,7400 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path401"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /><text
+ class="TextShape"
+ id="text403"><tspan
+ class="TextParagraph"
+ font-size="635px"
+ font-weight="400"
+ id="tspan405"
+ style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+ class="TextPosition"
+ x="4149"
+ y="6921"
+ id="tspan407"><tspan
+ id="tspan409"
+ style="fill:#000000;stroke:none">12</tspan></tspan></tspan></text>
</g></g><g
class="com.sun.star.drawing.CustomShape"
id="g411"
transform="translate(-3285.889,-3185.889)"><g
id="id23"><rect
- class="BoundingBox"
- x="5699"
- y="5999"
- width="2403"
- height="1403"
- id="rect414"
- style="fill:none;stroke:none" /><path
- d="m 6900,7400 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path416"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /></g></g><g
+ class="BoundingBox"
+ x="5699"
+ y="5999"
+ width="2403"
+ height="1403"
+ id="rect414"
+ style="fill:none;stroke:none" /><path
+ d="m 6900,7400 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path416"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /></g></g><g
class="com.sun.star.drawing.CustomShape"
id="g418"
transform="translate(-3285.889,-3185.889)"><g
id="id24"><rect
- class="BoundingBox"
- x="8099"
- y="5999"
- width="2403"
- height="1403"
- id="rect421"
- style="fill:none;stroke:none" /><path
- d="m 9300,7400 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path423"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text425"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan427"
- style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
- class="TextPosition"
- x="8949"
- y="6921"
- id="tspan429"><tspan
- id="tspan431"
- style="fill:#000000;stroke:none">18</tspan></tspan></tspan></text>
+ class="BoundingBox"
+ x="8099"
+ y="5999"
+ width="2403"
+ height="1403"
+ id="rect421"
+ style="fill:none;stroke:none" /><path
+ d="m 9300,7400 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path423"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /><text
+ class="TextShape"
+ id="text425"><tspan
+ class="TextParagraph"
+ font-size="635px"
+ font-weight="400"
+ id="tspan427"
+ style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+ class="TextPosition"
+ x="8949"
+ y="6921"
+ id="tspan429"><tspan
+ id="tspan431"
+ style="fill:#000000;stroke:none">18</tspan></tspan></tspan></text>
</g></g><g
class="com.sun.star.drawing.CustomShape"
id="g433"
transform="translate(-3285.889,-3185.889)"><g
id="id25"><rect
- class="BoundingBox"
- x="5699"
- y="5999"
- width="2403"
- height="1403"
- id="rect436"
- style="fill:none;stroke:none" /><path
- d="m 6900,7400 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path438"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text440"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan442"
- style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
- class="TextPosition"
- x="6549"
- y="6921"
- id="tspan444"><tspan
- id="tspan446"
- style="fill:#000000;stroke:none">13</tspan></tspan></tspan></text>
+ class="BoundingBox"
+ x="5699"
+ y="5999"
+ width="2403"
+ height="1403"
+ id="rect436"
+ style="fill:none;stroke:none" /><path
+ d="m 6900,7400 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path438"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /><text
+ class="TextShape"
+ id="text440"><tspan
+ class="TextParagraph"
+ font-size="635px"
+ font-weight="400"
+ id="tspan442"
+ style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+ class="TextPosition"
+ x="6549"
+ y="6921"
+ id="tspan444"><tspan
+ id="tspan446"
+ style="fill:#000000;stroke:none">13</tspan></tspan></tspan></text>
</g></g><g
class="com.sun.star.drawing.CustomShape"
id="g448"
transform="translate(-3285.889,-3185.889)"><g
id="id26"><rect
- class="BoundingBox"
- x="10499"
- y="5999"
- width="2403"
- height="1403"
- id="rect451"
- style="fill:none;stroke:none" /><path
- d="m 11700,7400 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path453"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text455"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan457"
- style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
- class="TextPosition"
- x="11349"
- y="6921"
- id="tspan459"><tspan
- id="tspan461"
- style="fill:#000000;stroke:none">19</tspan></tspan></tspan></text>
+ class="BoundingBox"
+ x="10499"
+ y="5999"
+ width="2403"
+ height="1403"
+ id="rect451"
+ style="fill:none;stroke:none" /><path
+ d="m 11700,7400 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path453"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /><text
+ class="TextShape"
+ id="text455"><tspan
+ class="TextParagraph"
+ font-size="635px"
+ font-weight="400"
+ id="tspan457"
+ style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+ class="TextPosition"
+ x="11349"
+ y="6921"
+ id="tspan459"><tspan
+ id="tspan461"
+ style="fill:#000000;stroke:none">19</tspan></tspan></tspan></text>
</g></g><g
class="com.sun.star.drawing.CustomShape"
id="g463"
transform="translate(-3285.889,-3185.889)"><g
id="id27"><rect
- class="BoundingBox"
- x="12899"
- y="5999"
- width="2403"
- height="1403"
- id="rect466"
- style="fill:none;stroke:none" /><path
- d="m 14100,7400 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path468"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /></g></g><g
+ class="BoundingBox"
+ x="12899"
+ y="5999"
+ width="2403"
+ height="1403"
+ id="rect466"
+ style="fill:none;stroke:none" /><path
+ d="m 14100,7400 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path468"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /></g></g><g
class="com.sun.star.drawing.CustomShape"
id="g470"
transform="translate(-3285.889,-3185.889)"><g
id="id28"><rect
- class="BoundingBox"
- x="15299"
- y="5999"
- width="2403"
- height="1403"
- id="rect473"
- style="fill:none;stroke:none" /><path
- d="m 16500,7400 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path475"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text477"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan479"
- style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
- class="TextPosition"
- x="16149"
- y="6921"
- id="tspan481"><tspan
- id="tspan483"
- style="fill:#000000;stroke:none">21</tspan></tspan></tspan></text>
+ class="BoundingBox"
+ x="15299"
+ y="5999"
+ width="2403"
+ height="1403"
+ id="rect473"
+ style="fill:none;stroke:none" /><path
+ d="m 16500,7400 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path475"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /><text
+ class="TextShape"
+ id="text477"><tspan
+ class="TextParagraph"
+ font-size="635px"
+ font-weight="400"
+ id="tspan479"
+ style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+ class="TextPosition"
+ x="16149"
+ y="6921"
+ id="tspan481"><tspan
+ id="tspan483"
+ style="fill:#000000;stroke:none">21</tspan></tspan></tspan></text>
</g></g><g
class="com.sun.star.drawing.CustomShape"
id="g485"
transform="translate(-3285.889,-3185.889)"><g
id="id29"><rect
- class="BoundingBox"
- x="12899"
- y="5999"
- width="2403"
- height="1403"
- id="rect488"
- style="fill:none;stroke:none" /><path
- d="m 14100,7400 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path490"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text492"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan494"
- style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
- class="TextPosition"
- x="13749"
- y="6921"
- id="tspan496"><tspan
- id="tspan498"
- style="fill:#000000;stroke:none">20</tspan></tspan></tspan></text>
+ class="BoundingBox"
+ x="12899"
+ y="5999"
+ width="2403"
+ height="1403"
+ id="rect488"
+ style="fill:none;stroke:none" /><path
+ d="m 14100,7400 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path490"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /><text
+ class="TextShape"
+ id="text492"><tspan
+ class="TextParagraph"
+ font-size="635px"
+ font-weight="400"
+ id="tspan494"
+ style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+ class="TextPosition"
+ x="13749"
+ y="6921"
+ id="tspan496"><tspan
+ id="tspan498"
+ style="fill:#000000;stroke:none">20</tspan></tspan></tspan></text>
</g></g><g
class="com.sun.star.drawing.CustomShape"
id="g500"
transform="translate(-3285.889,-3185.889)"><g
id="id30"><rect
- class="BoundingBox"
- x="3299"
- y="7399"
- width="2403"
- height="1403"
- id="rect503"
- style="fill:none;stroke:none" /><path
- d="m 4500,8800 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path505"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text507"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan509"
- style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
- class="TextPosition"
- x="4149"
- y="8321"
- id="tspan511"><tspan
- id="tspan513"
- style="fill:#000000;stroke:none">14</tspan></tspan></tspan></text>
+ class="BoundingBox"
+ x="3299"
+ y="7399"
+ width="2403"
+ height="1403"
+ id="rect503"
+ style="fill:none;stroke:none" /><path
+ d="m 4500,8800 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path505"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /><text
+ class="TextShape"
+ id="text507"><tspan
+ class="TextParagraph"
+ font-size="635px"
+ font-weight="400"
+ id="tspan509"
+ style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+ class="TextPosition"
+ x="4149"
+ y="8321"
+ id="tspan511"><tspan
+ id="tspan513"
+ style="fill:#000000;stroke:none">14</tspan></tspan></tspan></text>
</g></g><g
class="com.sun.star.drawing.CustomShape"
id="g515"
transform="translate(-3285.889,-3185.889)"><g
id="id31"><rect
- class="BoundingBox"
- x="5699"
- y="7399"
- width="2403"
- height="1403"
- id="rect518"
- style="fill:none;stroke:none" /><path
- d="m 6900,8800 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path520"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /></g></g><g
+ class="BoundingBox"
+ x="5699"
+ y="7399"
+ width="2403"
+ height="1403"
+ id="rect518"
+ style="fill:none;stroke:none" /><path
+ d="m 6900,8800 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path520"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /></g></g><g
class="com.sun.star.drawing.CustomShape"
id="g522"
transform="translate(-3285.889,-3185.889)"><g
id="id32"><rect
- class="BoundingBox"
- x="8099"
- y="7399"
- width="2403"
- height="1403"
- id="rect525"
- style="fill:none;stroke:none" /><path
- d="m 9300,8800 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path527"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text529"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan531"
- style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
- class="TextPosition"
- x="8949"
- y="8321"
- id="tspan533"><tspan
- id="tspan535"
- style="fill:#000000;stroke:none">16</tspan></tspan></tspan></text>
+ class="BoundingBox"
+ x="8099"
+ y="7399"
+ width="2403"
+ height="1403"
+ id="rect525"
+ style="fill:none;stroke:none" /><path
+ d="m 9300,8800 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path527"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /><text
+ class="TextShape"
+ id="text529"><tspan
+ class="TextParagraph"
+ font-size="635px"
+ font-weight="400"
+ id="tspan531"
+ style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+ class="TextPosition"
+ x="8949"
+ y="8321"
+ id="tspan533"><tspan
+ id="tspan535"
+ style="fill:#000000;stroke:none">16</tspan></tspan></tspan></text>
</g></g><g
class="com.sun.star.drawing.CustomShape"
id="g537"
transform="translate(-3285.889,-3185.889)"><g
id="id33"><rect
- class="BoundingBox"
- x="5699"
- y="7399"
- width="2403"
- height="1403"
- id="rect540"
- style="fill:none;stroke:none" /><path
- d="m 6900,8800 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path542"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text544"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan546"
- style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
- class="TextPosition"
- x="6549"
- y="8321"
- id="tspan548"><tspan
- id="tspan550"
- style="fill:#000000;stroke:none">15</tspan></tspan></tspan></text>
+ class="BoundingBox"
+ x="5699"
+ y="7399"
+ width="2403"
+ height="1403"
+ id="rect540"
+ style="fill:none;stroke:none" /><path
+ d="m 6900,8800 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path542"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /><text
+ class="TextShape"
+ id="text544"><tspan
+ class="TextParagraph"
+ font-size="635px"
+ font-weight="400"
+ id="tspan546"
+ style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+ class="TextPosition"
+ x="6549"
+ y="8321"
+ id="tspan548"><tspan
+ id="tspan550"
+ style="fill:#000000;stroke:none">15</tspan></tspan></tspan></text>
</g></g><g
class="com.sun.star.drawing.CustomShape"
id="g552"
transform="translate(-3285.889,-3185.889)"><g
id="id34"><rect
- class="BoundingBox"
- x="10499"
- y="7399"
- width="2403"
- height="1403"
- id="rect555"
- style="fill:none;stroke:none" /><path
- d="m 11700,8800 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path557"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text559"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan561"
- style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
- class="TextPosition"
- x="11349"
- y="8321"
- id="tspan563"><tspan
- id="tspan565"
- style="fill:#000000;stroke:none">17</tspan></tspan></tspan></text>
+ class="BoundingBox"
+ x="10499"
+ y="7399"
+ width="2403"
+ height="1403"
+ id="rect555"
+ style="fill:none;stroke:none" /><path
+ d="m 11700,8800 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path557"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /><text
+ class="TextShape"
+ id="text559"><tspan
+ class="TextParagraph"
+ font-size="635px"
+ font-weight="400"
+ id="tspan561"
+ style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+ class="TextPosition"
+ x="11349"
+ y="8321"
+ id="tspan563"><tspan
+ id="tspan565"
+ style="fill:#000000;stroke:none">17</tspan></tspan></tspan></text>
</g></g><g
class="com.sun.star.drawing.CustomShape"
id="g567"
transform="translate(-3285.889,-3185.889)"><g
id="id35"><rect
- class="BoundingBox"
- x="12899"
- y="7399"
- width="2403"
- height="1403"
- id="rect570"
- style="fill:none;stroke:none" /><path
- d="m 14100,8800 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path572"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /></g></g><g
+ class="BoundingBox"
+ x="12899"
+ y="7399"
+ width="2403"
+ height="1403"
+ id="rect570"
+ style="fill:none;stroke:none" /><path
+ d="m 14100,8800 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path572"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /></g></g><g
class="com.sun.star.drawing.CustomShape"
id="g574"
transform="translate(-3285.889,-3185.889)"><g
id="id36"><rect
- class="BoundingBox"
- x="15299"
- y="7399"
- width="2403"
- height="1403"
- id="rect577"
- style="fill:none;stroke:none" /><path
- d="m 16500,8800 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path579"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text581"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan583"
- style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
- class="TextPosition"
- x="16149"
- y="8321"
- id="tspan585"><tspan
- id="tspan587"
- style="fill:#000000;stroke:none">23</tspan></tspan></tspan></text>
+ class="BoundingBox"
+ x="15299"
+ y="7399"
+ width="2403"
+ height="1403"
+ id="rect577"
+ style="fill:none;stroke:none" /><path
+ d="m 16500,8800 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path579"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /><text
+ class="TextShape"
+ id="text581"><tspan
+ class="TextParagraph"
+ font-size="635px"
+ font-weight="400"
+ id="tspan583"
+ style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+ class="TextPosition"
+ x="16149"
+ y="8321"
+ id="tspan585"><tspan
+ id="tspan587"
+ style="fill:#000000;stroke:none">23</tspan></tspan></tspan></text>
</g></g><g
class="com.sun.star.drawing.CustomShape"
id="g589"
transform="translate(-3285.889,-3185.889)"><g
id="id37"><rect
- class="BoundingBox"
- x="12899"
- y="7399"
- width="2403"
- height="1403"
- id="rect592"
- style="fill:none;stroke:none" /><path
- d="m 14100,8800 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path594"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text596"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan598"
- style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
- class="TextPosition"
- x="13749"
- y="8321"
- id="tspan600"><tspan
- id="tspan602"
- style="fill:#000000;stroke:none">22</tspan></tspan></tspan></text>
+ class="BoundingBox"
+ x="12899"
+ y="7399"
+ width="2403"
+ height="1403"
+ id="rect592"
+ style="fill:none;stroke:none" /><path
+ d="m 14100,8800 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path594"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /><text
+ class="TextShape"
+ id="text596"><tspan
+ class="TextParagraph"
+ font-size="635px"
+ font-weight="400"
+ id="tspan598"
+ style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+ class="TextPosition"
+ x="13749"
+ y="8321"
+ id="tspan600"><tspan
+ id="tspan602"
+ style="fill:#000000;stroke:none">22</tspan></tspan></tspan></text>
</g></g><g
class="com.sun.star.drawing.CustomShape"
id="g604"
transform="translate(-3285.889,-3185.889)"><g
id="id38"><rect
- class="BoundingBox"
- x="3299"
- y="8799"
- width="2403"
- height="1403"
- id="rect607"
- style="fill:none;stroke:none" /><path
- d="m 4500,10200 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path609"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text611"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan613"
- style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
- class="TextPosition"
- x="4149"
- y="9721"
- id="tspan615"><tspan
- id="tspan617"
- style="fill:#000000;stroke:none">24</tspan></tspan></tspan></text>
+ class="BoundingBox"
+ x="3299"
+ y="8799"
+ width="2403"
+ height="1403"
+ id="rect607"
+ style="fill:none;stroke:none" /><path
+ d="m 4500,10200 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path609"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /><text
+ class="TextShape"
+ id="text611"><tspan
+ class="TextParagraph"
+ font-size="635px"
+ font-weight="400"
+ id="tspan613"
+ style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+ class="TextPosition"
+ x="4149"
+ y="9721"
+ id="tspan615"><tspan
+ id="tspan617"
+ style="fill:#000000;stroke:none">24</tspan></tspan></tspan></text>
</g></g><g
class="com.sun.star.drawing.CustomShape"
id="g619"
transform="translate(-3285.889,-3185.889)"><g
id="id39"><rect
- class="BoundingBox"
- x="5699"
- y="8799"
- width="2403"
- height="1403"
- id="rect622"
- style="fill:none;stroke:none" /><path
- d="m 6900,10200 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path624"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /></g></g><g
+ class="BoundingBox"
+ x="5699"
+ y="8799"
+ width="2403"
+ height="1403"
+ id="rect622"
+ style="fill:none;stroke:none" /><path
+ d="m 6900,10200 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path624"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /></g></g><g
class="com.sun.star.drawing.CustomShape"
id="g626"
transform="translate(-3285.889,-3185.889)"><g
id="id40"><rect
- class="BoundingBox"
- x="8099"
- y="8799"
- width="2403"
- height="1403"
- id="rect629"
- style="fill:none;stroke:none" /><path
- d="m 9300,10200 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path631"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text633"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan635"
- style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
- class="TextPosition"
- x="8949"
- y="9721"
- id="tspan637"><tspan
- id="tspan639"
- style="fill:#000000;stroke:none">26</tspan></tspan></tspan></text>
+ class="BoundingBox"
+ x="8099"
+ y="8799"
+ width="2403"
+ height="1403"
+ id="rect629"
+ style="fill:none;stroke:none" /><path
+ d="m 9300,10200 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path631"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /><text
+ class="TextShape"
+ id="text633"><tspan
+ class="TextParagraph"
+ font-size="635px"
+ font-weight="400"
+ id="tspan635"
+ style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+ class="TextPosition"
+ x="8949"
+ y="9721"
+ id="tspan637"><tspan
+ id="tspan639"
+ style="fill:#000000;stroke:none">26</tspan></tspan></tspan></text>
</g></g><g
class="com.sun.star.drawing.CustomShape"
id="g641"
transform="translate(-3285.889,-3185.889)"><g
id="id41"><rect
- class="BoundingBox"
- x="5699"
- y="8799"
- width="2403"
- height="1403"
- id="rect644"
- style="fill:none;stroke:none" /><path
- d="m 6900,10200 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path646"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text648"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan650"
- style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
- class="TextPosition"
- x="6549"
- y="9721"
- id="tspan652"><tspan
- id="tspan654"
- style="fill:#000000;stroke:none">25</tspan></tspan></tspan></text>
+ class="BoundingBox"
+ x="5699"
+ y="8799"
+ width="2403"
+ height="1403"
+ id="rect644"
+ style="fill:none;stroke:none" /><path
+ d="m 6900,10200 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path646"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /><text
+ class="TextShape"
+ id="text648"><tspan
+ class="TextParagraph"
+ font-size="635px"
+ font-weight="400"
+ id="tspan650"
+ style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+ class="TextPosition"
+ x="6549"
+ y="9721"
+ id="tspan652"><tspan
+ id="tspan654"
+ style="fill:#000000;stroke:none">25</tspan></tspan></tspan></text>
</g></g><g
class="com.sun.star.drawing.CustomShape"
id="g656"
transform="translate(-3285.889,-3185.889)"><g
id="id42"><rect
- class="BoundingBox"
- x="10499"
- y="8799"
- width="2403"
- height="1403"
- id="rect659"
- style="fill:none;stroke:none" /><path
- d="m 11700,10200 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path661"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text663"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan665"
- style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
- class="TextPosition"
- x="11349"
- y="9721"
- id="tspan667"><tspan
- id="tspan669"
- style="fill:#000000;stroke:none">27</tspan></tspan></tspan></text>
+ class="BoundingBox"
+ x="10499"
+ y="8799"
+ width="2403"
+ height="1403"
+ id="rect659"
+ style="fill:none;stroke:none" /><path
+ d="m 11700,10200 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path661"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /><text
+ class="TextShape"
+ id="text663"><tspan
+ class="TextParagraph"
+ font-size="635px"
+ font-weight="400"
+ id="tspan665"
+ style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+ class="TextPosition"
+ x="11349"
+ y="9721"
+ id="tspan667"><tspan
+ id="tspan669"
+ style="fill:#000000;stroke:none">27</tspan></tspan></tspan></text>
</g></g><g
class="com.sun.star.drawing.CustomShape"
id="g671"
transform="translate(-3285.889,-3185.889)"><g
id="id43"><rect
- class="BoundingBox"
- x="12899"
- y="8799"
- width="2403"
- height="1403"
- id="rect674"
- style="fill:none;stroke:none" /><path
- d="m 14100,10200 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path676"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /></g></g><g
+ class="BoundingBox"
+ x="12899"
+ y="8799"
+ width="2403"
+ height="1403"
+ id="rect674"
+ style="fill:none;stroke:none" /><path
+ d="m 14100,10200 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path676"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /></g></g><g
class="com.sun.star.drawing.CustomShape"
id="g678"
transform="translate(-3285.889,-3185.889)"><g
id="id44"><rect
- class="BoundingBox"
- x="15299"
- y="8799"
- width="2403"
- height="1403"
- id="rect681"
- style="fill:none;stroke:none" /><path
- d="m 16500,10200 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path683"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text685"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan687"
- style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
- class="TextPosition"
- x="16149"
- y="9721"
- id="tspan689"><tspan
- id="tspan691"
- style="fill:#000000;stroke:none">29</tspan></tspan></tspan></text>
+ class="BoundingBox"
+ x="15299"
+ y="8799"
+ width="2403"
+ height="1403"
+ id="rect681"
+ style="fill:none;stroke:none" /><path
+ d="m 16500,10200 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path683"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /><text
+ class="TextShape"
+ id="text685"><tspan
+ class="TextParagraph"
+ font-size="635px"
+ font-weight="400"
+ id="tspan687"
+ style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+ class="TextPosition"
+ x="16149"
+ y="9721"
+ id="tspan689"><tspan
+ id="tspan691"
+ style="fill:#000000;stroke:none">29</tspan></tspan></tspan></text>
</g></g><g
class="com.sun.star.drawing.CustomShape"
id="g693"
transform="translate(-3285.889,-3185.889)"><g
id="id45"><rect
- class="BoundingBox"
- x="12899"
- y="8799"
- width="2403"
- height="1403"
- id="rect696"
- style="fill:none;stroke:none" /><path
- d="m 14100,10200 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
- id="path698"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#3465a4" /><text
- class="TextShape"
- id="text700"><tspan
- class="TextParagraph"
- font-size="635px"
- font-weight="400"
- id="tspan702"
- style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
- class="TextPosition"
- x="13749"
- y="9721"
- id="tspan704"><tspan
- id="tspan706"
- style="fill:#000000;stroke:none">28</tspan></tspan></tspan></text>
+ class="BoundingBox"
+ x="12899"
+ y="8799"
+ width="2403"
+ height="1403"
+ id="rect696"
+ style="fill:none;stroke:none" /><path
+ d="m 14100,10200 -1200,0 0,-1400 2400,0 0,1400 -1200,0 z"
+ id="path698"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#3465a4" /><text
+ class="TextShape"
+ id="text700"><tspan
+ class="TextParagraph"
+ font-size="635px"
+ font-weight="400"
+ id="tspan702"
+ style="font-weight:400;font-size:635px;font-family:sans-serif"><tspan
+ class="TextPosition"
+ x="13749"
+ y="9721"
+ id="tspan704"><tspan
+ id="tspan706"
+ style="fill:#000000;stroke:none">28</tspan></tspan></tspan></text>
</g></g><g
class="com.sun.star.drawing.LineShape"
id="g708"
transform="translate(-3285.889,-3185.889)"><g
id="id46"><rect
- class="BoundingBox"
- x="5199"
- y="3850"
- width="1402"
- height="301"
- id="rect711"
- style="fill:none;stroke:none" /><path
- d="m 5200,4000 970,0"
- id="path713"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff3333" /><path
- d="m 6600,4000 -450,-150 0,300 450,-150 z"
- id="path715"
- inkscape:connector-curvature="0"
- style="fill:#ff3333;stroke:none" /></g></g><g
+ class="BoundingBox"
+ x="5199"
+ y="3850"
+ width="1402"
+ height="301"
+ id="rect711"
+ style="fill:none;stroke:none" /><path
+ d="m 5200,4000 970,0"
+ id="path713"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#ff3333" /><path
+ d="m 6600,4000 -450,-150 0,300 450,-150 z"
+ id="path715"
+ inkscape:connector-curvature="0"
+ style="fill:#ff3333;stroke:none" /></g></g><g
class="com.sun.star.drawing.LineShape"
id="g717"
transform="translate(-3285.889,-3185.889)"><g
id="id47"><rect
- class="BoundingBox"
- x="5000"
- y="4299"
- width="1202"
- height="802"
- id="rect720"
- style="fill:none;stroke:none" /><path
- d="m 6200,4300 -842,561"
- id="path722"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff3333" /><path
- d="m 5000,5100 458,-125 -167,-249 -291,374 z"
- id="path724"
- inkscape:connector-curvature="0"
- style="fill:#ff3333;stroke:none" /></g></g><g
+ class="BoundingBox"
+ x="5000"
+ y="4299"
+ width="1202"
+ height="802"
+ id="rect720"
+ style="fill:none;stroke:none" /><path
+ d="m 6200,4300 -842,561"
+ id="path722"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#ff3333" /><path
+ d="m 5000,5100 458,-125 -167,-249 -291,374 z"
+ id="path724"
+ inkscape:connector-curvature="0"
+ style="fill:#ff3333;stroke:none" /></g></g><g
class="com.sun.star.drawing.LineShape"
id="g726"
transform="translate(-3285.889,-3185.889)"><g
id="id48"><rect
- class="BoundingBox"
- x="5399"
- y="5250"
- width="1202"
- height="301"
- id="rect729"
- style="fill:none;stroke:none" /><path
- d="m 5400,5400 770,0"
- id="path731"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff3333" /><path
- d="m 6600,5400 -450,-150 0,300 450,-150 z"
- id="path733"
- inkscape:connector-curvature="0"
- style="fill:#ff3333;stroke:none" /></g></g><g
+ class="BoundingBox"
+ x="5399"
+ y="5250"
+ width="1202"
+ height="301"
+ id="rect729"
+ style="fill:none;stroke:none" /><path
+ d="m 5400,5400 770,0"
+ id="path731"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#ff3333" /><path
+ d="m 6600,5400 -450,-150 0,300 450,-150 z"
+ id="path733"
+ inkscape:connector-curvature="0"
+ style="fill:#ff3333;stroke:none" /></g></g><g
class="com.sun.star.drawing.LineShape"
id="g735"
transform="translate(-3285.889,-3185.889)"><g
id="id49"><rect
- class="BoundingBox"
- x="7599"
- y="5250"
- width="1202"
- height="301"
- id="rect738"
- style="fill:none;stroke:none" /><path
- d="m 7600,5400 770,0"
- id="path740"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff3333" /><path
- d="m 8800,5400 -450,-150 0,300 450,-150 z"
- id="path742"
- inkscape:connector-curvature="0"
- style="fill:#ff3333;stroke:none" /></g></g><g
+ class="BoundingBox"
+ x="7599"
+ y="5250"
+ width="1202"
+ height="301"
+ id="rect738"
+ style="fill:none;stroke:none" /><path
+ d="m 7600,5400 770,0"
+ id="path740"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#ff3333" /><path
+ d="m 8800,5400 -450,-150 0,300 450,-150 z"
+ id="path742"
+ inkscape:connector-curvature="0"
+ style="fill:#ff3333;stroke:none" /></g></g><g
class="com.sun.star.drawing.LineShape"
id="g744"
transform="translate(-3285.889,-3185.889)"><g
id="id50"><rect
- class="BoundingBox"
- x="9799"
- y="5250"
- width="1402"
- height="301"
- id="rect747"
- style="fill:none;stroke:none" /><path
- d="m 9800,5400 970,0"
- id="path749"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff3333" /><path
- d="m 11200,5400 -450,-150 0,300 450,-150 z"
- id="path751"
- inkscape:connector-curvature="0"
- style="fill:#ff3333;stroke:none" /></g></g><g
+ class="BoundingBox"
+ x="9799"
+ y="5250"
+ width="1402"
+ height="301"
+ id="rect747"
+ style="fill:none;stroke:none" /><path
+ d="m 9800,5400 970,0"
+ id="path749"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#ff3333" /><path
+ d="m 11200,5400 -450,-150 0,300 450,-150 z"
+ id="path751"
+ inkscape:connector-curvature="0"
+ style="fill:#ff3333;stroke:none" /></g></g><g
class="com.sun.star.drawing.LineShape"
id="g753"
transform="translate(-3285.889,-3185.889)"><g
id="id51"><rect
- class="BoundingBox"
- x="9900"
- y="4200"
- width="1202"
- height="802"
- id="rect756"
- style="fill:none;stroke:none" /><path
- d="m 11100,5000 -842,-561"
- id="path758"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff3333" /><path
- d="m 9900,4200 291,374 167,-249 -458,-125 z"
- id="path760"
- inkscape:connector-curvature="0"
- style="fill:#ff3333;stroke:none" /></g></g><g
+ class="BoundingBox"
+ x="9900"
+ y="4200"
+ width="1202"
+ height="802"
+ id="rect756"
+ style="fill:none;stroke:none" /><path
+ d="m 11100,5000 -842,-561"
+ id="path758"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#ff3333" /><path
+ d="m 9900,4200 291,374 167,-249 -458,-125 z"
+ id="path760"
+ inkscape:connector-curvature="0"
+ style="fill:#ff3333;stroke:none" /></g></g><g
class="com.sun.star.drawing.LineShape"
id="g762"
transform="translate(-3285.889,-3185.889)"><g
id="id52"><rect
- class="BoundingBox"
- x="9999"
- y="3850"
- width="1402"
- height="301"
- id="rect765"
- style="fill:none;stroke:none" /><path
- d="m 10000,4000 970,0"
- id="path767"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff3333" /><path
- d="m 11400,4000 -450,-150 0,300 450,-150 z"
- id="path769"
- inkscape:connector-curvature="0"
- style="fill:#ff3333;stroke:none" /></g></g><g
+ class="BoundingBox"
+ x="9999"
+ y="3850"
+ width="1402"
+ height="301"
+ id="rect765"
+ style="fill:none;stroke:none" /><path
+ d="m 10000,4000 970,0"
+ id="path767"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#ff3333" /><path
+ d="m 11400,4000 -450,-150 0,300 450,-150 z"
+ id="path769"
+ inkscape:connector-curvature="0"
+ style="fill:#ff3333;stroke:none" /></g></g><g
class="com.sun.star.drawing.LineShape"
id="g771"
transform="translate(-3285.889,-3185.889)"><g
id="id53"><rect
- class="BoundingBox"
- x="12399"
- y="3850"
- width="1202"
- height="301"
- id="rect774"
- style="fill:none;stroke:none" /><path
- d="m 12400,4000 770,0"
- id="path776"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff3333" /><path
- d="m 13600,4000 -450,-150 0,300 450,-150 z"
- id="path778"
- inkscape:connector-curvature="0"
- style="fill:#ff3333;stroke:none" /></g></g><g
+ class="BoundingBox"
+ x="12399"
+ y="3850"
+ width="1202"
+ height="301"
+ id="rect774"
+ style="fill:none;stroke:none" /><path
+ d="m 12400,4000 770,0"
+ id="path776"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#ff3333" /><path
+ d="m 13600,4000 -450,-150 0,300 450,-150 z"
+ id="path778"
+ inkscape:connector-curvature="0"
+ style="fill:#ff3333;stroke:none" /></g></g><g
class="com.sun.star.drawing.LineShape"
id="g780"
transform="translate(-3285.889,-3185.889)"><g
id="id54"><rect
- class="BoundingBox"
- x="14799"
- y="3850"
- width="1202"
- height="301"
- id="rect783"
- style="fill:none;stroke:none" /><path
- d="m 14800,4000 770,0"
- id="path785"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff3333" /><path
- d="m 16000,4000 -450,-150 0,300 450,-150 z"
- id="path787"
- inkscape:connector-curvature="0"
- style="fill:#ff3333;stroke:none" /></g></g><g
+ class="BoundingBox"
+ x="14799"
+ y="3850"
+ width="1202"
+ height="301"
+ id="rect783"
+ style="fill:none;stroke:none" /><path
+ d="m 14800,4000 770,0"
+ id="path785"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#ff3333" /><path
+ d="m 16000,4000 -450,-150 0,300 450,-150 z"
+ id="path787"
+ inkscape:connector-curvature="0"
+ style="fill:#ff3333;stroke:none" /></g></g><g
class="com.sun.star.drawing.LineShape"
id="g789"
transform="translate(-3285.889,-3185.889)"><g
id="id55"><rect
- class="BoundingBox"
- x="14400"
- y="4399"
- width="1402"
- height="602"
- id="rect792"
- style="fill:none;stroke:none" /><path
- d="m 15800,4400 -1005,431"
- id="path794"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff3333" /><path
- d="m 14400,5000 473,-39 -118,-276 -355,315 z"
- id="path796"
- inkscape:connector-curvature="0"
- style="fill:#ff3333;stroke:none" /></g></g><g
+ class="BoundingBox"
+ x="14400"
+ y="4399"
+ width="1402"
+ height="602"
+ id="rect792"
+ style="fill:none;stroke:none" /><path
+ d="m 15800,4400 -1005,431"
+ id="path794"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#ff3333" /><path
+ d="m 14400,5000 473,-39 -118,-276 -355,315 z"
+ id="path796"
+ inkscape:connector-curvature="0"
+ style="fill:#ff3333;stroke:none" /></g></g><g
class="com.sun.star.drawing.LineShape"
id="g798"
transform="translate(-3285.889,-3185.889)"><g
id="id56"><rect
- class="BoundingBox"
- x="14599"
- y="5250"
- width="1402"
- height="301"
- id="rect801"
- style="fill:none;stroke:none" /><path
- d="m 14600,5400 970,0"
- id="path803"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff3333" /><path
- d="m 16000,5400 -450,-150 0,300 450,-150 z"
- id="path805"
- inkscape:connector-curvature="0"
- style="fill:#ff3333;stroke:none" /></g></g><g
+ class="BoundingBox"
+ x="14599"
+ y="5250"
+ width="1402"
+ height="301"
+ id="rect801"
+ style="fill:none;stroke:none" /><path
+ d="m 14600,5400 970,0"
+ id="path803"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#ff3333" /><path
+ d="m 16000,5400 -450,-150 0,300 450,-150 z"
+ id="path805"
+ inkscape:connector-curvature="0"
+ style="fill:#ff3333;stroke:none" /></g></g><g
class="com.sun.star.drawing.LineShape"
id="g807"
transform="translate(-3285.889,-3185.889)"><g
id="id57"><rect
- class="BoundingBox"
- x="5199"
- y="6550"
- width="1402"
- height="301"
- id="rect810"
- style="fill:none;stroke:none" /><path
- d="m 5200,6700 970,0"
- id="path812"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff3333" /><path
- d="m 6600,6700 -450,-150 0,300 450,-150 z"
- id="path814"
- inkscape:connector-curvature="0"
- style="fill:#ff3333;stroke:none" /></g></g><g
+ class="BoundingBox"
+ x="5199"
+ y="6550"
+ width="1402"
+ height="301"
+ id="rect810"
+ style="fill:none;stroke:none" /><path
+ d="m 5200,6700 970,0"
+ id="path812"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#ff3333" /><path
+ d="m 6600,6700 -450,-150 0,300 450,-150 z"
+ id="path814"
+ inkscape:connector-curvature="0"
+ style="fill:#ff3333;stroke:none" /></g></g><g
class="com.sun.star.drawing.LineShape"
id="g816"
transform="translate(-3285.889,-3129.4446)"><g
id="id58"><rect
- class="BoundingBox"
- x="5000"
- y="6999"
- width="1202"
- height="802"
- id="rect819"
- style="fill:none;stroke:none" /><path
- d="m 6200,7000 -842,561"
- id="path821"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff3333" /><path
- d="m 5000,7800 458,-125 -167,-249 -291,374 z"
- id="path823"
- inkscape:connector-curvature="0"
- style="fill:#ff3333;stroke:none" /></g></g><g
+ class="BoundingBox"
+ x="5000"
+ y="6999"
+ width="1202"
+ height="802"
+ id="rect819"
+ style="fill:none;stroke:none" /><path
+ d="m 6200,7000 -842,561"
+ id="path821"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#ff3333" /><path
+ d="m 5000,7800 458,-125 -167,-249 -291,374 z"
+ id="path823"
+ inkscape:connector-curvature="0"
+ style="fill:#ff3333;stroke:none" /></g></g><g
class="com.sun.star.drawing.LineShape"
id="g825"
transform="translate(-3285.889,-3185.889)"><g
id="id59"><rect
- class="BoundingBox"
- x="5399"
- y="7950"
- width="1202"
- height="301"
- id="rect828"
- style="fill:none;stroke:none" /><path
- d="m 5400,8100 770,0"
- id="path830"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff3333" /><path
- d="m 6600,8100 -450,-150 0,300 450,-150 z"
- id="path832"
- inkscape:connector-curvature="0"
- style="fill:#ff3333;stroke:none" /></g></g><g
+ class="BoundingBox"
+ x="5399"
+ y="7950"
+ width="1202"
+ height="301"
+ id="rect828"
+ style="fill:none;stroke:none" /><path
+ d="m 5400,8100 770,0"
+ id="path830"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#ff3333" /><path
+ d="m 6600,8100 -450,-150 0,300 450,-150 z"
+ id="path832"
+ inkscape:connector-curvature="0"
+ style="fill:#ff3333;stroke:none" /></g></g><g
class="com.sun.star.drawing.LineShape"
id="g834"
transform="translate(-3285.889,-3185.889)"><g
id="id60"><rect
- class="BoundingBox"
- x="7599"
- y="7950"
- width="1202"
- height="301"
- id="rect837"
- style="fill:none;stroke:none" /><path
- d="m 7600,8100 770,0"
- id="path839"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff3333" /><path
- d="m 8800,8100 -450,-150 0,300 450,-150 z"
- id="path841"
- inkscape:connector-curvature="0"
- style="fill:#ff3333;stroke:none" /></g></g><g
+ class="BoundingBox"
+ x="7599"
+ y="7950"
+ width="1202"
+ height="301"
+ id="rect837"
+ style="fill:none;stroke:none" /><path
+ d="m 7600,8100 770,0"
+ id="path839"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#ff3333" /><path
+ d="m 8800,8100 -450,-150 0,300 450,-150 z"
+ id="path841"
+ inkscape:connector-curvature="0"
+ style="fill:#ff3333;stroke:none" /></g></g><g
class="com.sun.star.drawing.LineShape"
id="g843"
transform="translate(-3285.889,-3185.889)"><g
id="id61"><rect
- class="BoundingBox"
- x="9799"
- y="7950"
- width="1402"
- height="301"
- id="rect846"
- style="fill:none;stroke:none" /><path
- d="m 9800,8100 970,0"
- id="path848"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff3333" /><path
- d="m 11200,8100 -450,-150 0,300 450,-150 z"
- id="path850"
- inkscape:connector-curvature="0"
- style="fill:#ff3333;stroke:none" /></g></g><g
+ class="BoundingBox"
+ x="9799"
+ y="7950"
+ width="1402"
+ height="301"
+ id="rect846"
+ style="fill:none;stroke:none" /><path
+ d="m 9800,8100 970,0"
+ id="path848"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#ff3333" /><path
+ d="m 11200,8100 -450,-150 0,300 450,-150 z"
+ id="path850"
+ inkscape:connector-curvature="0"
+ style="fill:#ff3333;stroke:none" /></g></g><g
class="com.sun.star.drawing.LineShape"
id="g852"
transform="translate(-3285.889,-3129.4446)"><g
id="id62"><rect
- class="BoundingBox"
- x="9900"
- y="6900"
- width="1202"
- height="802"
- id="rect855"
- style="fill:none;stroke:none" /><path
- d="m 11100,7700 -842,-561"
- id="path857"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff3333" /><path
- d="m 9900,6900 291,374 167,-249 -458,-125 z"
- id="path859"
- inkscape:connector-curvature="0"
- style="fill:#ff3333;stroke:none" /></g></g><g
+ class="BoundingBox"
+ x="9900"
+ y="6900"
+ width="1202"
+ height="802"
+ id="rect855"
+ style="fill:none;stroke:none" /><path
+ d="m 11100,7700 -842,-561"
+ id="path857"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#ff3333" /><path
+ d="m 9900,6900 291,374 167,-249 -458,-125 z"
+ id="path859"
+ inkscape:connector-curvature="0"
+ style="fill:#ff3333;stroke:none" /></g></g><g
class="com.sun.star.drawing.LineShape"
id="g861"
transform="translate(-3285.889,-3185.889)"><g
id="id63"><rect
- class="BoundingBox"
- x="9999"
- y="6550"
- width="1402"
- height="301"
- id="rect864"
- style="fill:none;stroke:none" /><path
- d="m 10000,6700 970,0"
- id="path866"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff3333" /><path
- d="m 11400,6700 -450,-150 0,300 450,-150 z"
- id="path868"
- inkscape:connector-curvature="0"
- style="fill:#ff3333;stroke:none" /></g></g><g
+ class="BoundingBox"
+ x="9999"
+ y="6550"
+ width="1402"
+ height="301"
+ id="rect864"
+ style="fill:none;stroke:none" /><path
+ d="m 10000,6700 970,0"
+ id="path866"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#ff3333" /><path
+ d="m 11400,6700 -450,-150 0,300 450,-150 z"
+ id="path868"
+ inkscape:connector-curvature="0"
+ style="fill:#ff3333;stroke:none" /></g></g><g
class="com.sun.star.drawing.LineShape"
id="g870"
transform="translate(-3285.889,-3185.889)"><g
id="id64"><rect
- class="BoundingBox"
- x="12399"
- y="6550"
- width="1202"
- height="301"
- id="rect873"
- style="fill:none;stroke:none" /><path
- d="m 12400,6700 770,0"
- id="path875"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff3333" /><path
- d="m 13600,6700 -450,-150 0,300 450,-150 z"
- id="path877"
- inkscape:connector-curvature="0"
- style="fill:#ff3333;stroke:none" /></g></g><g
+ class="BoundingBox"
+ x="12399"
+ y="6550"
+ width="1202"
+ height="301"
+ id="rect873"
+ style="fill:none;stroke:none" /><path
+ d="m 12400,6700 770,0"
+ id="path875"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#ff3333" /><path
+ d="m 13600,6700 -450,-150 0,300 450,-150 z"
+ id="path877"
+ inkscape:connector-curvature="0"
+ style="fill:#ff3333;stroke:none" /></g></g><g
class="com.sun.star.drawing.LineShape"
id="g879"
transform="translate(-3285.889,-3185.889)"><g
id="id65"><rect
- class="BoundingBox"
- x="14799"
- y="6550"
- width="1202"
- height="301"
- id="rect882"
- style="fill:none;stroke:none" /><path
- d="m 14800,6700 770,0"
- id="path884"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff3333" /><path
- d="m 16000,6700 -450,-150 0,300 450,-150 z"
- id="path886"
- inkscape:connector-curvature="0"
- style="fill:#ff3333;stroke:none" /></g></g><g
+ class="BoundingBox"
+ x="14799"
+ y="6550"
+ width="1202"
+ height="301"
+ id="rect882"
+ style="fill:none;stroke:none" /><path
+ d="m 14800,6700 770,0"
+ id="path884"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#ff3333" /><path
+ d="m 16000,6700 -450,-150 0,300 450,-150 z"
+ id="path886"
+ inkscape:connector-curvature="0"
+ style="fill:#ff3333;stroke:none" /></g></g><g
class="com.sun.star.drawing.LineShape"
id="g888"
transform="translate(-3285.889,-3129.4446)"><g
id="id66"><rect
- class="BoundingBox"
- x="14400"
- y="7099"
- width="1402"
- height="602"
- id="rect891"
- style="fill:none;stroke:none" /><path
- d="m 15800,7100 -1005,431"
- id="path893"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff3333" /><path
- d="m 14400,7700 473,-39 -118,-276 -355,315 z"
- id="path895"
- inkscape:connector-curvature="0"
- style="fill:#ff3333;stroke:none" /></g></g><g
+ class="BoundingBox"
+ x="14400"
+ y="7099"
+ width="1402"
+ height="602"
+ id="rect891"
+ style="fill:none;stroke:none" /><path
+ d="m 15800,7100 -1005,431"
+ id="path893"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#ff3333" /><path
+ d="m 14400,7700 473,-39 -118,-276 -355,315 z"
+ id="path895"
+ inkscape:connector-curvature="0"
+ style="fill:#ff3333;stroke:none" /></g></g><g
class="com.sun.star.drawing.LineShape"
id="g897"
transform="translate(-3285.889,-3185.889)"><g
id="id67"><rect
- class="BoundingBox"
- x="14599"
- y="7950"
- width="1402"
- height="301"
- id="rect900"
- style="fill:none;stroke:none" /><path
- d="m 14600,8100 970,0"
- id="path902"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff3333" /><path
- d="m 16000,8100 -450,-150 0,300 450,-150 z"
- id="path904"
- inkscape:connector-curvature="0"
- style="fill:#ff3333;stroke:none" /></g></g><g
+ class="BoundingBox"
+ x="14599"
+ y="7950"
+ width="1402"
+ height="301"
+ id="rect900"
+ style="fill:none;stroke:none" /><path
+ d="m 14600,8100 970,0"
+ id="path902"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#ff3333" /><path
+ d="m 16000,8100 -450,-150 0,300 450,-150 z"
+ id="path904"
+ inkscape:connector-curvature="0"
+ style="fill:#ff3333;stroke:none" /></g></g><g
class="com.sun.star.drawing.LineShape"
id="g906"
transform="translate(-3285.889,-3185.889)"><g
id="id68"><rect
- class="BoundingBox"
- x="5399"
- y="9450"
- width="1202"
- height="301"
- id="rect909"
- style="fill:none;stroke:none" /><path
- d="m 5400,9600 770,0"
- id="path911"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff3333" /><path
- d="m 6600,9600 -450,-150 0,300 450,-150 z"
- id="path913"
- inkscape:connector-curvature="0"
- style="fill:#ff3333;stroke:none" /></g></g><g
+ class="BoundingBox"
+ x="5399"
+ y="9450"
+ width="1202"
+ height="301"
+ id="rect909"
+ style="fill:none;stroke:none" /><path
+ d="m 5400,9600 770,0"
+ id="path911"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#ff3333" /><path
+ d="m 6600,9600 -450,-150 0,300 450,-150 z"
+ id="path913"
+ inkscape:connector-curvature="0"
+ style="fill:#ff3333;stroke:none" /></g></g><g
class="com.sun.star.drawing.LineShape"
id="g915"
transform="translate(-3285.889,-3185.889)"><g
id="id69"><rect
- class="BoundingBox"
- x="7599"
- y="9450"
- width="1202"
- height="301"
- id="rect918"
- style="fill:none;stroke:none" /><path
- d="m 7600,9600 770,0"
- id="path920"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff3333" /><path
- d="m 8800,9600 -450,-150 0,300 450,-150 z"
- id="path922"
- inkscape:connector-curvature="0"
- style="fill:#ff3333;stroke:none" /></g></g><g
+ class="BoundingBox"
+ x="7599"
+ y="9450"
+ width="1202"
+ height="301"
+ id="rect918"
+ style="fill:none;stroke:none" /><path
+ d="m 7600,9600 770,0"
+ id="path920"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#ff3333" /><path
+ d="m 8800,9600 -450,-150 0,300 450,-150 z"
+ id="path922"
+ inkscape:connector-curvature="0"
+ style="fill:#ff3333;stroke:none" /></g></g><g
class="com.sun.star.drawing.LineShape"
id="g924"
transform="translate(-3285.889,-3185.889)"><g
id="id70"><rect
- class="BoundingBox"
- x="9999"
- y="9450"
- width="1202"
- height="301"
- id="rect927"
- style="fill:none;stroke:none" /><path
- d="m 10000,9600 770,0"
- id="path929"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff3333" /><path
- d="m 11200,9600 -450,-150 0,300 450,-150 z"
- id="path931"
- inkscape:connector-curvature="0"
- style="fill:#ff3333;stroke:none" /></g></g><g
+ class="BoundingBox"
+ x="9999"
+ y="9450"
+ width="1202"
+ height="301"
+ id="rect927"
+ style="fill:none;stroke:none" /><path
+ d="m 10000,9600 770,0"
+ id="path929"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#ff3333" /><path
+ d="m 11200,9600 -450,-150 0,300 450,-150 z"
+ id="path931"
+ inkscape:connector-curvature="0"
+ style="fill:#ff3333;stroke:none" /></g></g><g
class="com.sun.star.drawing.LineShape"
id="g933"
transform="translate(-3285.889,-3185.889)"><g
id="id71"><rect
- class="BoundingBox"
- x="12399"
- y="9450"
- width="1202"
- height="301"
- id="rect936"
- style="fill:none;stroke:none" /><path
- d="m 12400,9600 770,0"
- id="path938"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff3333" /><path
- d="m 13600,9600 -450,-150 0,300 450,-150 z"
- id="path940"
- inkscape:connector-curvature="0"
- style="fill:#ff3333;stroke:none" /></g></g><g
+ class="BoundingBox"
+ x="12399"
+ y="9450"
+ width="1202"
+ height="301"
+ id="rect936"
+ style="fill:none;stroke:none" /><path
+ d="m 12400,9600 770,0"
+ id="path938"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#ff3333" /><path
+ d="m 13600,9600 -450,-150 0,300 450,-150 z"
+ id="path940"
+ inkscape:connector-curvature="0"
+ style="fill:#ff3333;stroke:none" /></g></g><g
class="com.sun.star.drawing.LineShape"
id="g942"
transform="translate(-3285.889,-3185.889)"><g
id="id72"><rect
- class="BoundingBox"
- x="14799"
- y="9450"
- width="1202"
- height="301"
- id="rect945"
- style="fill:none;stroke:none" /><path
- d="m 14800,9600 770,0"
- id="path947"
- inkscape:connector-curvature="0"
- style="fill:none;stroke:#ff3333" /><path
- d="m 16000,9600 -450,-150 0,300 450,-150 z"
- id="path949"
- inkscape:connector-curvature="0"
- style="fill:#ff3333;stroke:none" /></g></g></svg>
+ class="BoundingBox"
+ x="14799"
+ y="9450"
+ width="1202"
+ height="301"
+ id="rect945"
+ style="fill:none;stroke:none" /><path
+ d="m 14800,9600 770,0"
+ id="path947"
+ inkscape:connector-curvature="0"
+ style="fill:none;stroke:#ff3333" /><path
+ d="m 16000,9600 -450,-150 0,300 450,-150 z"
+ id="path949"
+ inkscape:connector-curvature="0"
+ style="fill:#ff3333;stroke:none" /></g></g></svg>
diff --git a/Documentation/media/uapi/v4l/selection.svg b/Documentation/media/uapi/v4l/selection.svg
index d309187..a93e3b5 100644
--- a/Documentation/media/uapi/v4l/selection.svg
+++ b/Documentation/media/uapi/v4l/selection.svg
@@ -1,5812 +1,1151 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!-- Created with Inkscape (http://www.inkscape.org/) -->
-
-<svg
- xmlns:osb="http://www.openswatchbook.org/uri/2009/osb"
- xmlns:dc="http://purl.org/dc/elements/1.1/"
- xmlns:cc="http://creativecommons.org/ns#"
- xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
- xmlns:svg="http://www.w3.org/2000/svg"
- xmlns="http://www.w3.org/2000/svg"
- xmlns:xlink="http://www.w3.org/1999/xlink"
- xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
- xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
- width="4226.3345"
- height="1686.8481"
- id="svg2"
- sodipodi:version="0.32"
- inkscape:version="0.91 r13725"
- sodipodi:docname="selection.svg"
- inkscape:output_extension="org.inkscape.output.svg.inkscape"
- version="1.0"
- style="display:inline;enable-background:new"
- inkscape:export-filename="/home/cheeseness/Documents/LCA09/mascot/tuz_final.png"
- inkscape:export-xdpi="100.03588"
- inkscape:export-ydpi="100.03588">
- <sodipodi:namedview
- id="base"
- pagecolor="#ffffff"
- bordercolor="#666666"
- borderopacity="1.0"
- gridtolerance="10000"
- guidetolerance="10"
- objecttolerance="10"
- inkscape:pageopacity="0.0"
- inkscape:pageshadow="2"
- inkscape:zoom="0.32297491"
- inkscape:cx="2113.1672"
- inkscape:cy="843.42407"
- inkscape:document-units="px"
- inkscape:current-layer="layer16"
- showgrid="false"
- inkscape:window-width="1920"
- inkscape:window-height="997"
- inkscape:window-x="1920"
- inkscape:window-y="30"
- showguides="false"
- inkscape:guide-bbox="true"
- units="mm"
- inkscape:window-maximized="1"
- fit-margin-top="0"
- fit-margin-left="0"
- fit-margin-right="0"
- fit-margin-bottom="0" />
- <defs
- id="defs4">
- <pattern
- inkscape:collect="always"
- xlink:href="#Strips1_1"
- id="pattern5557"
- patternTransform="matrix(5.4431804,0,0,10.10048,1808.3554,-48.222348)" />
- <marker
- inkscape:stockid="Arrow1Send"
- orient="auto"
- refY="0"
- refX="0"
- id="Arrow1Send"
- style="overflow:visible"
- inkscape:isstock="true">
- <path
- id="path7188"
- d="M 0,0 5,-5 -12.5,0 5,5 0,0 Z"
- style="fill:#f8d615;fill-opacity:1;fill-rule:evenodd;stroke:#f8d615;stroke-width:1pt;stroke-opacity:1"
- transform="matrix(-0.2,0,0,-0.2,-1.2,0)"
- inkscape:connector-curvature="0" />
- </marker>
- <pattern
- inkscape:isstock="true"
- inkscape:stockid="Stripes 1:1"
- id="Strips1_1"
- patternTransform="translate(0,0) scale(10,10)"
- height="1"
- width="2"
- patternUnits="userSpaceOnUse"
- inkscape:collect="always">
- <rect
- id="rect5945"
- height="2"
- width="1"
- y="-0.5"
- x="0"
- style="fill:#f815bb;stroke:none" />
- </pattern>
- <linearGradient
- id="linearGradient10954"
- osb:paint="solid">
- <stop
- style="stop-color:#d9f90b;stop-opacity:1;"
- offset="0"
- id="stop10956" />
- </linearGradient>
- <linearGradient
- id="linearGradient9165"
- osb:paint="solid">
- <stop
- style="stop-color:#000000;stop-opacity:0.31330472;"
- offset="0"
- id="stop9167" />
- </linearGradient>
- <filter
- inkscape:collect="always"
- x="-0.084654994"
- width="1.16931"
- y="-0.36592469"
- height="1.7318494"
- id="filter11361">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="4.5740586"
- id="feGaussianBlur11363" />
- </filter>
- <linearGradient
- id="linearGradient7622">
- <stop
- style="stop-color:#ffffff;stop-opacity:1;"
- offset="0"
- id="stop7624" />
- <stop
- style="stop-color:#ffffff;stop-opacity:0;"
- offset="1"
- id="stop7626" />
- </linearGradient>
- <linearGradient
- id="linearGradient4113">
- <stop
- style="stop-color:#000000;stop-opacity:0;"
- offset="0"
- id="stop4115" />
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="1"
- id="stop4117" />
- </linearGradient>
- <linearGradient
- inkscape:collect="always"
- id="linearGradient3660">
- <stop
- style="stop-color:#ffffff;stop-opacity:1;"
- offset="0"
- id="stop3662" />
- <stop
- style="stop-color:#ffffff;stop-opacity:0;"
- offset="1"
- id="stop3664" />
- </linearGradient>
- <linearGradient
- id="linearGradient3627">
- <stop
- style="stop-color:#ffffff;stop-opacity:1;"
- offset="0"
- id="stop3629" />
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="1"
- id="stop3631" />
- </linearGradient>
- <linearGradient
- id="linearGradient2843">
- <stop
- id="stop2845"
- offset="0"
- style="stop-color:#000000;stop-opacity:1;" />
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="0.02188784"
- id="stop2847" />
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="0.75866222"
- id="stop2849" />
- <stop
- id="stop2851"
- offset="0.88508981"
- style="stop-color:#232323;stop-opacity:1;" />
- <stop
- id="stop2853"
- offset="1"
- style="stop-color:#595959;stop-opacity:1;" />
- </linearGradient>
- <linearGradient
- inkscape:collect="always"
- id="linearGradient8964">
- <stop
- style="stop-color:#1a1a1a;stop-opacity:1;"
- offset="0"
- id="stop8966" />
- <stop
- style="stop-color:#1a1a1a;stop-opacity:0;"
- offset="1"
- id="stop8968" />
- </linearGradient>
- <linearGradient
- id="linearGradient8952">
- <stop
- style="stop-color:#0a0c0c;stop-opacity:1;"
- offset="0"
- id="stop8954" />
- <stop
- style="stop-color:#1f2727;stop-opacity:0;"
- offset="1"
- id="stop8956" />
- </linearGradient>
- <linearGradient
- id="linearGradient8430">
- <stop
- style="stop-color:#1e2323;stop-opacity:1;"
- offset="0"
- id="stop8432" />
- <stop
- id="stop8438"
- offset="0.55992389"
- style="stop-color:#181d1d;stop-opacity:1;" />
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="1"
- id="stop8434" />
- </linearGradient>
- <linearGradient
- id="linearGradient8398">
- <stop
- style="stop-color:#283131;stop-opacity:0;"
- offset="0"
- id="stop8400" />
- <stop
- id="stop8402"
- offset="0.5125587"
- style="stop-color:#1e2424;stop-opacity:0;" />
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="1"
- id="stop8404" />
- </linearGradient>
- <linearGradient
- inkscape:collect="always"
- id="linearGradient4870">
- <stop
- style="stop-color:#c7bd80;stop-opacity:1;"
- offset="0"
- id="stop4872" />
- <stop
- style="stop-color:#c7bd80;stop-opacity:0;"
- offset="1"
- id="stop4874" />
- </linearGradient>
- <linearGradient
- inkscape:collect="always"
- id="linearGradient4862">
- <stop
- style="stop-color:#e2e2e2;stop-opacity:1;"
- offset="0"
- id="stop4864" />
- <stop
- style="stop-color:#e2e2e2;stop-opacity:0;"
- offset="1"
- id="stop4866" />
- </linearGradient>
- <linearGradient
- id="linearGradient4478">
- <stop
- style="stop-color:#f9eed3;stop-opacity:1;"
- offset="0"
- id="stop4480" />
- <stop
- style="stop-color:#000000;stop-opacity:0;"
- offset="1"
- id="stop4482" />
- </linearGradient>
- <linearGradient
- id="linearGradient4106">
- <stop
- style="stop-color:#d9e002;stop-opacity:1;"
- offset="0"
- id="stop4108" />
- <stop
- id="stop4114"
- offset="0.5"
- style="stop-color:#a9ae01;stop-opacity:1;" />
- <stop
- style="stop-color:#717501;stop-opacity:1;"
- offset="1"
- id="stop4110" />
- </linearGradient>
- <linearGradient
- id="linearGradient4084">
- <stop
- style="stop-color:#7d7d00;stop-opacity:1;"
- offset="0"
- id="stop4086" />
- <stop
- id="stop4088"
- offset="0.3636601"
- style="stop-color:#c6c700;stop-opacity:1;" />
- <stop
- style="stop-color:#f6f800;stop-opacity:1;"
- offset="1"
- id="stop4090" />
- </linearGradient>
- <linearGradient
- id="linearGradient4041">
- <stop
- id="stop4043"
- offset="0"
- style="stop-color:#ffff00;stop-opacity:1;" />
- <stop
- id="stop4045"
- offset="1"
- style="stop-color:#ffff00;stop-opacity:0;" />
- </linearGradient>
- <linearGradient
- id="linearGradient4025">
- <stop
- style="stop-color:#ffffff;stop-opacity:1;"
- offset="0"
- id="stop4027" />
- <stop
- style="stop-color:#ffffff;stop-opacity:0;"
- offset="1"
- id="stop4031" />
- </linearGradient>
- <linearGradient
- id="linearGradient4013">
- <stop
- style="stop-color:#ffff00;stop-opacity:1;"
- offset="0"
- id="stop4015" />
- <stop
- style="stop-color:#b2b200;stop-opacity:1;"
- offset="1"
- id="stop4017" />
- </linearGradient>
- <linearGradient
- id="linearGradient3985">
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="0"
- id="stop3987" />
- <stop
- style="stop-color:#1d1d1d;stop-opacity:1;"
- offset="1"
- id="stop3989" />
- </linearGradient>
- <linearGradient
- id="linearGradient3961">
- <stop
- style="stop-color:#283131;stop-opacity:0;"
- offset="0"
- id="stop3963" />
- <stop
- id="stop3965"
- offset="0.5"
- style="stop-color:#1e2424;stop-opacity:1;" />
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="1"
- id="stop3967" />
- </linearGradient>
- <linearGradient
- id="linearGradient3951">
- <stop
- id="stop3953"
- offset="0"
- style="stop-color:#344040;stop-opacity:1;" />
- <stop
- style="stop-color:#222929;stop-opacity:1;"
- offset="0.5"
- id="stop3955" />
- <stop
- id="stop3957"
- offset="1"
- style="stop-color:#000000;stop-opacity:1;" />
- </linearGradient>
- <linearGradient
- id="linearGradient3909">
- <stop
- style="stop-color:#283131;stop-opacity:1;"
- offset="0"
- id="stop3911" />
- <stop
- id="stop3917"
- offset="0.5"
- style="stop-color:#1e2424;stop-opacity:1;" />
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="1"
- id="stop3913" />
- </linearGradient>
- <linearGradient
- id="linearGradient3537">
- <stop
- style="stop-color:#ada469;stop-opacity:1;"
- offset="0"
- id="stop3539" />
- <stop
- id="stop3545"
- offset="0.81132078"
- style="stop-color:#ada469;stop-opacity:1;" />
- <stop
- style="stop-color:#ffffff;stop-opacity:1;"
- offset="1"
- id="stop3541" />
- </linearGradient>
- <linearGradient
- id="linearGradient3317">
- <stop
- style="stop-color:#cfc690;stop-opacity:1"
- offset="0"
- id="stop3319" />
- <stop
- id="stop3321"
- offset="0.21161865"
- style="stop-color:#afa775;stop-opacity:1;" />
- <stop
- id="stop3323"
- offset="0.53408515"
- style="stop-color:#615c3a;stop-opacity:1;" />
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="0.76504093"
- id="stop3325" />
- <stop
- id="stop3327"
- offset="1"
- style="stop-color:#403518;stop-opacity:1;" />
- </linearGradient>
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3317"
- id="radialGradient3315"
- cx="543.6698"
- cy="147.3131"
- fx="543.6698"
- fy="147.3131"
- r="47.863216"
- gradientTransform="matrix(2.1382256,0,0,2.3382884,-77.03847,-101.68704)"
- gradientUnits="userSpaceOnUse" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3537"
- id="radialGradient3543"
- cx="385"
- cy="237.00504"
- fx="385"
- fy="237.00504"
- r="86.928574"
- gradientTransform="matrix(1,0,0,0.8562038,0,34.080427)"
- gradientUnits="userSpaceOnUse" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3909"
- id="radialGradient3915"
- cx="418.30365"
- cy="342.47794"
- fx="418.30365"
- fy="342.47794"
- r="131.4509"
- gradientTransform="matrix(1.3957347,0.6211056,-0.4244067,0.9537174,-15.061913,-227.96711)"
- gradientUnits="userSpaceOnUse" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3951"
- id="radialGradient3933"
- cx="397.16388"
- cy="336.95245"
- fx="397.16388"
- fy="336.95245"
- r="36.75"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(1.9449972,2.4894837e-7,-2.4894833e-7,1.9449969,-375.31868,-318.41912)" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3961"
- id="linearGradient3959"
- x1="398.21429"
- y1="343.52289"
- x2="379.28571"
- y2="265.30862"
- gradientUnits="userSpaceOnUse"
- gradientTransform="translate(450.03125,73.843964)" />
- <filter
- inkscape:collect="always"
- id="filter3981"
- x="-0.30000001"
- width="1.6"
- y="-0.30000001"
- height="1.6">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="2"
- id="feGaussianBlur3983" />
- </filter>
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3985"
- id="radialGradient3991"
- cx="402.48898"
- cy="317.23578"
- fx="402.48898"
- fy="317.23578"
- r="23.714285"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(4.3776616,0,0,4.3776616,-1358.3025,-1070.7357)" />
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3999">
- <path
- style="display:inline;opacity:1;fill:#f5ff04;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
- d="m 179.64286,267.36218 c -22.41044,39.70292 -60.6161,115.78029 -69.28571,149.64286 -8.64721,33.7751 -8.77199,66.41654 -0.35715,86.42858 8.3602,19.88213 26.16398,35.6328 40.71428,41.42856 -0.59638,-14.37587 14.37295,-43.28583 72.85715,-72.5 58.62627,-29.28514 78.38163,-27.13086 103.57142,-47.14286 25.63006,-20.36176 12.61031,-67.04463 3.21429,-93.92857 -9.43424,-26.99328 -34.96741,-59.12448 -66.42857,-69.64285 -31.03327,-10.37532 -65.01776,-4.84837 -84.28571,5.71428 z"
- id="path4001"
- sodipodi:nodetypes="czzczzzzc"
- inkscape:connector-curvature="0" />
- </clipPath>
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4013"
- id="radialGradient4056"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(1.1323239,0.7659488,-1.4550286,2.1510098,588.75376,-711.79716)"
- cx="228.81355"
- cy="440.26971"
- fx="228.81355"
- fy="440.26971"
- r="119.17509" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4041"
- id="radialGradient4060"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(0.05911206,2.6869855,-0.7234268,0.01591495,408.72779,-424.56452)"
- cx="275.4422"
- cy="335.34866"
- fx="275.4422"
- fy="335.34866"
- r="36.75" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4025"
- id="radialGradient4062"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(0.05911206,2.6869855,-0.7234268,0.01591495,408.72779,-424.56452)"
- cx="275.4422"
- cy="335.34866"
- fx="275.4422"
- fy="335.34866"
- r="36.75" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4084"
- id="linearGradient4082"
- gradientUnits="userSpaceOnUse"
- x1="182.35046"
- y1="256.11136"
- x2="145.53348"
- y2="542.20502" />
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath4100">
- <path
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.9000755px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
- d="m 265.93541,126.68393 -18.76721,168.86308 174.10543,-73.12068 61.9544,88.65883 57.8844,-31.9903 -37.53442,-180.059677 -237.6426,27.648747 z"
- id="path4102"
- sodipodi:nodetypes="ccccccc"
- inkscape:connector-curvature="0" />
- </clipPath>
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4106"
- id="radialGradient4112"
- cx="250.22678"
- cy="475.09763"
- fx="250.22678"
- fy="475.09763"
- r="95.98877"
- gradientTransform="matrix(1.2259004,-0.7077739,0.1413989,0.2449102,322.22326,608.91815)"
- gradientUnits="userSpaceOnUse" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4478"
- id="linearGradient4484"
- x1="412.08926"
- y1="404.91574"
- x2="417.375"
- y2="401.82648"
- gradientUnits="userSpaceOnUse" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4478"
- id="linearGradient4486"
- x1="411.91071"
- y1="404.91577"
- x2="417.375"
- y2="401.82648"
- gradientUnits="userSpaceOnUse" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4478"
- id="linearGradient4488"
- x1="411.91071"
- y1="405.54077"
- x2="417.375"
- y2="401.82648"
- gradientUnits="userSpaceOnUse" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4478"
- id="linearGradient4490"
- x1="412.08926"
- y1="405.54077"
- x2="417.375"
- y2="401.82648"
- gradientUnits="userSpaceOnUse" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4478"
- id="linearGradient4492"
- x1="411.73212"
- y1="405.54077"
- x2="417.375"
- y2="401.82648"
- gradientUnits="userSpaceOnUse" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4862"
- id="radialGradient4868"
- cx="429.56738"
- cy="377.42877"
- fx="429.56738"
- fy="377.42877"
- r="72.079735"
- gradientTransform="matrix(1,0,0,0.618034,0,144.16496)"
- gradientUnits="userSpaceOnUse" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4870"
- id="radialGradient4876"
- cx="437.6991"
- cy="391.21735"
- fx="437.6991"
- fy="391.21735"
- r="36.611931"
- gradientTransform="matrix(1,0,0,0.618034,0,149.43174)"
- gradientUnits="userSpaceOnUse" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4013"
- id="radialGradient3585"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(1.1323239,0.7659488,-1.4550286,2.1510098,588.75376,-711.79716)"
- cx="228.81355"
- cy="440.26971"
- fx="228.81355"
- fy="440.26971"
- r="119.17509" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4084"
- id="linearGradient3587"
- gradientUnits="userSpaceOnUse"
- x1="182.35046"
- y1="256.11136"
- x2="145.53348"
- y2="542.20502" />
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8514">
- <path
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 352.24553,211.99185 c -3.80443,-25.26423 -16.80972,-50.63802 -17.1568,-75.52523 -0.18626,-13.35552 3.27285,-26.57091 13.75553,-39.554046 36.34702,-65.295835 116.94091,-84.694685 185.93466,-91.465427 86.92239,-11.016801 184.91267,17.940072 233.37134,95.401283 54.12402,75.7333 56.67476,172.53912 80.61204,259.52795 29.43779,127.1276 54.77914,256.21414 60.39224,386.85035 -3.06348,78.18185 -8.42634,165.18415 -60.50321,228.13413 -48.02654,50.35744 -122.78647,50.05304 -187.06988,59.00234 -90.55539,4.655 -184.35153,-16.1458 -261.7839,-64.19824 -64.77564,-37.94001 -95.73019,-113.47863 -97.2794,-186.01958 -8.38917,-79.87516 26.39152,-153.80851 51.6204,-227.15961 7.47061,-82.76107 9.41286,-166.24775 9.65334,-249.38484 -0.83682,-32.19544 -7.08953,-63.81733 -11.54636,-95.60908 z"
- id="path8516"
- sodipodi:nodetypes="cscccccccccccc"
- inkscape:connector-curvature="0" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8604">
- <path
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 352.24553,211.99185 c -3.80443,-25.26423 -16.80972,-50.63802 -17.1568,-75.52523 -0.18626,-13.35552 3.27285,-26.57091 13.75553,-39.554046 36.34702,-65.295835 116.94091,-84.694685 185.93466,-91.465427 86.92239,-11.016801 184.91267,17.940072 233.37134,95.401283 54.12402,75.7333 56.67476,172.53912 80.61204,259.52795 29.43779,127.1276 54.77914,256.21414 60.39224,386.85035 -3.06348,78.18185 -8.42634,165.18415 -60.50321,228.13413 -48.02654,50.35744 -122.78647,50.05304 -187.06988,59.00234 -90.55539,4.655 -184.35153,-16.1458 -261.7839,-64.19824 -64.77564,-37.94001 -95.73019,-113.47863 -97.2794,-186.01958 -8.38917,-79.87516 26.39152,-153.80851 51.6204,-227.15961 7.47061,-82.76107 9.41286,-166.24775 9.65334,-249.38484 -0.83682,-32.19544 -7.08953,-63.81733 -11.54636,-95.60908 z"
- id="path8606"
- sodipodi:nodetypes="cscccccccccccc"
- inkscape:connector-curvature="0" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8610">
- <path
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 352.24553,211.99185 c -3.80443,-25.26423 -16.80972,-50.63802 -17.1568,-75.52523 -0.18626,-13.35552 3.27285,-26.57091 13.75553,-39.554046 36.34702,-65.295835 116.94091,-84.694685 185.93466,-91.465427 86.92239,-11.016801 184.91267,17.940072 233.37134,95.401283 54.12402,75.7333 56.67476,172.53912 80.61204,259.52795 29.43779,127.1276 54.77914,256.21414 60.39224,386.85035 -3.06348,78.18185 -8.42634,165.18415 -60.50321,228.13413 -48.02654,50.35744 -122.78647,50.05304 -187.06988,59.00234 -90.55539,4.655 -184.35153,-16.1458 -261.7839,-64.19824 -64.77564,-37.94001 -95.73019,-113.47863 -97.2794,-186.01958 -8.38917,-79.87516 26.39152,-153.80851 51.6204,-227.15961 7.47061,-82.76107 9.41286,-166.24775 9.65334,-249.38484 -0.83682,-32.19544 -7.08953,-63.81733 -11.54636,-95.60908 z"
- id="path8612"
- sodipodi:nodetypes="cscccccccccccc"
- inkscape:connector-curvature="0" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8616">
- <path
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 352.24553,211.99185 c -3.80443,-25.26423 -16.80972,-50.63802 -17.1568,-75.52523 -0.18626,-13.35552 3.27285,-26.57091 13.75553,-39.554046 36.34702,-65.295835 116.94091,-84.694685 185.93466,-91.465427 86.92239,-11.016801 184.91267,17.940072 233.37134,95.401283 54.12402,75.7333 56.67476,172.53912 80.61204,259.52795 29.43779,127.1276 54.77914,256.21414 60.39224,386.85035 -3.06348,78.18185 -8.42634,165.18415 -60.50321,228.13413 -48.02654,50.35744 -122.78647,50.05304 -187.06988,59.00234 -90.55539,4.655 -184.35153,-16.1458 -261.7839,-64.19824 -64.77564,-37.94001 -95.73019,-113.47863 -97.2794,-186.01958 -8.38917,-79.87516 26.39152,-153.80851 51.6204,-227.15961 7.47061,-82.76107 9.41286,-166.24775 9.65334,-249.38484 -0.83682,-32.19544 -7.08953,-63.81733 -11.54636,-95.60908 z"
- id="path8618"
- sodipodi:nodetypes="cscccccccccccc"
- inkscape:connector-curvature="0" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8622">
- <path
- style="display:inline;opacity:1;fill:#202020;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 821.64329,477.88997 c 0,0 22.61947,-6.50681 35.74275,-5.87273 13.12328,0.63409 30.64158,1.93862 43.70885,12.18619 13.06727,10.24756 25.06774,27.14007 34.11239,58.36965 9.04465,31.22958 1.69832,99.25201 -6.17603,143.34735 -7.87435,44.09534 -28.2651,106.11298 -45,140 -16.7349,33.88702 -49.79771,77.4952 -60.56943,89.87616 -11.36422,13.06197 -56.20589,36.42617 -79.43057,42.26667 5.3033,-10.6066 48.89976,-50.58884 35,-60.71426 -14.01897,-10.21226 -45.76009,45.98236 -84.29315,29.03317 21.38231,-13.13212 41.7794,-51.18606 34.04061,-66.59445 -7.84025,-15.61039 -30.70493,48.75757 -93.53554,37.01288 30.05204,-27.52666 55.40706,-70.90401 41.2627,-82.9797 -14.41516,-12.30687 -60.46175,54.29315 -60.46175,54.29315 0,0 -2.8219,-41.70118 13.7732,-68.60732 16.63935,-26.97787 79.65297,-81.61527 99.55313,-111.70342 19.90015,-30.08814 33.61256,-66.00902 42.13542,-92.51794 8.52286,-26.50892 15.80094,-77.09954 15.80094,-77.09954"
- id="path8624"
- sodipodi:nodetypes="czzzzzzczczczczzzc"
- inkscape:connector-curvature="0" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8642">
- <path
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#0f0f0f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 366.88839,504.13471 c 0,0 -29.55406,40.57305 -47.85714,74.28571 -18.30309,33.71267 -58.62109,126.35694 -70.35714,171.07143 -11.7594,44.80344 -62.5,123.57144 -62.5,123.57144 l 76.07143,18.21428 c 0,0 11.80712,-12.82335 31.07142,-46.07143 19.2643,-33.24808 60.35715,-138.57143 60.35715,-138.57143 l 13.21428,-202.5 z"
- id="path8644"
- sodipodi:nodetypes="czzcczcc"
- inkscape:connector-curvature="0" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8658">
- <path
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#0b0b0b;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 569.03125,1018.7776 c -4.28571,0.7143 -27.62815,3.6181 -57.85714,10 -30.22899,6.3819 -99.77493,25.9619 -142.85715,35.7143 -43.08222,9.7524 -117.26443,34.816 -156.91262,27.2654 -39.64818,-7.5506 -89.51595,-64.4083 -89.51595,-64.4083 l 4.28572,-94.28571 c 0,0 85.88551,-16.20094 112.14285,-33.57143 26.25735,-17.37049 45.58238,-49.66598 59.28572,-71.42857 13.70334,-21.76259 32.85714,-71.42858 32.85714,-71.42858 l 238.57143,262.14289 z"
- id="path8660"
- sodipodi:nodetypes="czzzcczzcc"
- inkscape:connector-curvature="0" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter8802"
- x="-0.35311759"
- width="1.7062352"
- y="-0.1817714"
- height="1.3635428">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="48.038491"
- id="feGaussianBlur8804" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8806"
- x="-0.61142862"
- width="2.2228572"
- y="-0.14930232"
- height="1.2986046">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="37.830213"
- id="feGaussianBlur8808" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8810"
- x="-0.23519406"
- width="1.4703881"
- y="-0.24500646"
- height="1.4900129">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="58.328041"
- id="feGaussianBlur8812" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8814"
- x="-0.20466694"
- width="1.4093339"
- y="-0.29007819"
- height="1.5801564">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="22.300169"
- id="feGaussianBlur8816" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8818"
- x="-0.34381232"
- width="1.6876246"
- y="-0.18433961"
- height="1.3686792">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="34.542167"
- id="feGaussianBlur8820" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8822"
- x="-0.2742857"
- width="1.5485713"
- y="-0.21333334"
- height="1.4266667">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="11.313708"
- id="feGaussianBlur8824" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8826"
- x="-0.25894088"
- width="1.5178818"
- y="-0.2236412"
- height="1.4472824">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="19.631544"
- id="feGaussianBlur8828" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8856"
- x="-0.3253231"
- width="1.6506462"
- y="-0.19013336"
- height="1.3802667">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="28.712591"
- id="feGaussianBlur8858" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8860"
- x="-0.38093024"
- width="1.7618605"
- y="-0.17518716"
- height="1.3503743">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="19.304015"
- id="feGaussianBlur8862" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8888"
- x="-0.2112188"
- width="1.4224375"
- y="-0.16808605"
- height="1.3361721">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="8.3693583"
- id="feGaussianBlur8890" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8892"
- x="-0.18692794"
- width="1.3738559"
- y="-0.23646873"
- height="1.4729375">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="31.21228"
- id="feGaussianBlur8894" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8906">
- <path
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 352.24553,211.99185 c -3.80443,-25.26423 -16.80972,-50.63802 -17.1568,-75.52523 -0.18626,-13.35552 3.27285,-26.57091 13.75553,-39.554046 36.34702,-65.295835 116.94091,-84.694685 185.93466,-91.465427 86.92239,-11.016801 184.91267,17.940072 233.37134,95.401283 54.12402,75.7333 56.67476,172.53912 80.61204,259.52795 29.43779,127.1276 54.77914,256.21414 60.39224,386.85035 -3.06348,78.18185 -8.42634,165.18415 -60.50321,228.13413 -48.02654,50.35744 -122.78647,50.05304 -187.06988,59.00234 -90.55539,4.655 -184.35153,-16.1458 -261.7839,-64.19824 -64.77564,-37.94001 -95.73019,-113.47863 -97.2794,-186.01958 -8.38917,-79.87516 26.39152,-153.80851 51.6204,-227.15961 7.47061,-82.76107 9.41286,-166.24775 9.65334,-249.38484 -0.83682,-32.19544 -7.08953,-63.81733 -11.54636,-95.60908 z"
- id="path8908"
- sodipodi:nodetypes="cscccccccccccc"
- inkscape:connector-curvature="0" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter8940"
- x="-0.25152978"
- width="1.5030596"
- y="-0.053035267"
- height="1.1060705">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="13.024603"
- id="feGaussianBlur8942" />
- </filter>
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient8952"
- id="linearGradient8958"
- x1="609.31244"
- y1="239.46866"
- x2="560.83142"
- y2="262.86206"
- gradientUnits="userSpaceOnUse"
- gradientTransform="translate(450.03125,73.843964)" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient8964"
- id="linearGradient8970"
- x1="603.84064"
- y1="627.85303"
- x2="616.24396"
- y2="585.42664"
- gradientUnits="userSpaceOnUse"
- gradientTransform="translate(450.03125,73.843964)" />
- <filter
- inkscape:collect="always"
- id="filter9020"
- x="-0.32861114"
- width="1.6572223"
- y="-0.182"
- height="1.364">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="20.912684"
- id="feGaussianBlur9022" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter9024"
- x="-0.55453134"
- width="2.1090627"
- y="-0.51434779"
- height="2.0286956">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="20.912684"
- id="feGaussianBlur9026" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter9044"
- x="-0.32631579"
- width="1.6526316"
- y="-0.84545463"
- height="2.6909094">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="21.92031"
- id="feGaussianBlur9046" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter9048"
- x="-0.40879121"
- width="1.8175824"
- y="-0.71538466"
- height="2.4307692">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="21.92031"
- id="feGaussianBlur9050" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter3587"
- x="-0.1">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="8.881432"
- id="feGaussianBlur3589" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3602">
- <path
- sodipodi:nodetypes="czzzzzzczczczczzzc"
- id="path3604"
- d="m 647.61204,540.04601 c 0,0 22.61947,-6.50681 35.74275,-5.87273 13.12328,0.63409 30.64158,1.93862 43.70885,12.18619 13.06727,10.24756 25.06774,27.14007 34.11239,58.36965 9.04465,31.22958 1.69832,99.25201 -6.17603,143.34735 -7.87435,44.09534 -28.2651,106.11298 -45,140 -16.7349,33.88702 -49.79771,77.4952 -60.56943,89.87616 -11.36422,13.06197 -56.20589,36.42617 -79.43057,42.26667 5.3033,-10.6066 48.89976,-50.58884 35,-60.71426 -14.01897,-10.21226 -45.76009,45.98236 -84.29315,29.03317 21.38231,-13.13212 41.7794,-51.18606 34.04061,-66.59445 -7.84025,-15.61039 -30.70493,48.75757 -93.53554,37.01288 30.05204,-27.52666 55.40706,-70.90401 41.2627,-82.9797 -14.41516,-12.30687 -60.46175,54.29315 -60.46175,54.29315 0,0 -2.8219,-41.70118 13.7732,-68.60732 16.63935,-26.97787 79.65297,-81.61527 99.55313,-111.70342 19.90015,-30.08814 33.61256,-66.00902 42.13542,-92.51794 8.52286,-26.50892 15.80094,-77.09954 15.80094,-77.09954"
- style="display:inline;opacity:1;fill:#202020;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- inkscape:connector-curvature="0" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter4120"
- x="-0.2770822"
- width="1.5541644"
- y="-0.32482043"
- height="1.6496409">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="19.956289"
- id="feGaussianBlur4122" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3631">
- <path
- style="display:inline;opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 760.16396,935.83377 c 6.7941,18.90279 10.49369,33.29969 11.8903,51.21189 1.39662,17.91234 -3.78268,51.80084 -2.90046,70.65614 0.88175,18.8452 8.13369,40.099 27.34463,48.9689 19.41887,8.9658 49.31924,10.2113 74.11984,-3.1456 24.8006,-13.357 57.40102,-70.3255 70.97426,-97.3087 13.62385,-27.08394 38.76107,-114.49737 44.6608,-149.76859 5.89973,-35.27121 2.55054,-41.30077 -4.61748,-49.05549 2.6403,-27.84015 -1.49972,-54.93543 13.10969,-87.18618 -30.24901,11.8257 -37.38229,40.1607 -48.31889,65.50508 -8.00091,-50.93293 0.20916,-71.27319 3.31889,-101.21936 -29.06476,14.77791 -42.86151,47.11402 -45,92.85714 -10.92395,-1.3042 -21.39144,-4.43423 -33.57143,-0.71429 -0.26404,-46.02334 -1.46356,-76.88941 8.91063,-114.20649 -53.25547,21.02686 -62.94728,106.5941 -56.05349,112.77792 -10.88282,0.535 -21.37108,-1.2973 -32.85714,2.85715 0.63892,-42.57135 -0.26046,-84.90861 -30,-122.85715 0,0 -30.95806,80.92234 -31.42857,103.57143 -0.47051,22.64909 9.45159,40.16588 9.45159,40.16588 0,0 -8.56807,36.74051 -6.29859,58.23223 2.29585,21.74146 20.4429,59.67617 27.26542,78.65809 z"
- id="path3633"
- sodipodi:nodetypes="czzzzzzcccccccccczczz"
- inkscape:connector-curvature="0" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3665">
- <path
- sodipodi:nodetypes="czzcczcc"
- id="path3667"
- d="m 366.88839,504.13471 c 0,0 -29.55406,40.57305 -47.85714,74.28571 -18.30309,33.71267 -58.62109,126.35694 -70.35714,171.07143 -11.7594,44.80344 -62.5,123.57144 -62.5,123.57144 l 76.07143,18.21428 c 0,0 11.80712,-12.82335 31.07142,-46.07143 19.2643,-33.24808 60.35715,-138.57143 60.35715,-138.57143 l 13.21428,-202.5 z"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#0f0f0f;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- inkscape:connector-curvature="0" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3677">
- <path
- style="display:inline;opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 586.13271,997.98981 c 6.7941,18.90279 10.49369,33.29969 11.8903,51.21189 1.39662,17.9123 -3.78268,51.8008 -2.90046,70.6561 0.88175,18.8452 8.13369,40.099 27.34463,48.9689 19.41887,8.9658 49.31924,10.2113 74.11984,-3.1456 24.8006,-13.357 57.40102,-70.3255 70.97426,-97.3087 13.62385,-27.0839 38.76107,-114.49733 44.6608,-149.76855 5.89973,-35.27121 2.55054,-41.30077 -4.61748,-49.05549 2.6403,-27.84015 -1.49972,-54.93543 13.10969,-87.18618 -30.24901,11.8257 -37.38229,40.1607 -48.31889,65.50508 -8.00091,-50.93293 0.20916,-71.27319 3.31889,-101.21936 -29.06476,14.77791 -42.86151,47.11402 -45,92.85714 -10.92395,-1.3042 -21.39144,-4.43423 -33.57143,-0.71429 -0.26404,-46.02334 -1.46356,-76.88941 8.91063,-114.20649 -53.25547,21.02686 -62.94728,106.5941 -56.05349,112.77792 -10.88282,0.535 -21.37108,-1.2973 -32.85714,2.85715 0.63892,-42.57135 -0.26046,-84.90861 -30,-122.85715 0,0 -30.95806,80.92234 -31.42857,103.57143 -0.47051,22.64909 9.45159,40.16588 9.45159,40.16588 0,0 -8.56807,36.74051 -6.29859,58.23223 2.29585,21.74146 20.4429,59.67617 27.26542,78.65809 z"
- id="path3679"
- sodipodi:nodetypes="czzzzzzcccccccccczczz"
- inkscape:connector-curvature="0" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter3898">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="10.892985"
- id="feGaussianBlur3900" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter4130"
- x="-0.49509686"
- width="1.9901937"
- y="-0.26708817"
- height="1.5341763">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="10.730622"
- id="feGaussianBlur4132" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter4141"
- x="-0.40611032"
- width="1.8122206"
- y="-0.30260596"
- height="1.6052119">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="9.8586086"
- id="feGaussianBlur4143" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath4177">
- <path
- sodipodi:nodetypes="czzzzzzcccccccccczczz"
- id="path4179"
- d="m 586.13271,997.98981 c 6.7941,18.90279 10.49369,33.29969 11.8903,51.21189 1.39662,17.9123 -3.78268,51.8008 -2.90046,70.6561 0.88175,18.8452 8.13369,40.099 27.34463,48.9689 19.41887,8.9658 49.31924,10.2113 74.11984,-3.1456 24.8006,-13.357 57.40102,-70.3255 70.97426,-97.3087 13.62385,-27.0839 38.76107,-114.49733 44.6608,-149.76855 5.89973,-35.27121 2.55054,-41.30077 -4.61748,-49.05549 2.6403,-27.84015 -1.49972,-54.93543 13.10969,-87.18618 -30.24901,11.8257 -37.38229,40.1607 -48.31889,65.50508 -8.00091,-50.93293 0.20916,-71.27319 3.31889,-101.21936 -29.06476,14.77791 -42.86151,47.11402 -45,92.85714 -10.92395,-1.3042 -21.39144,-4.43423 -33.57143,-0.71429 -0.26404,-46.02334 -1.46356,-76.88941 8.91063,-114.20649 -53.25547,21.02686 -62.94728,106.5941 -56.05349,112.77792 -10.88282,0.535 -21.37108,-1.2973 -32.85714,2.85715 0.63892,-42.57135 -0.26046,-84.90861 -30,-122.85715 0,0 -30.95806,80.92234 -31.42857,103.57143 -0.47051,22.64909 9.45159,40.16588 9.45159,40.16588 0,0 -8.56807,36.74051 -6.29859,58.23223 2.29585,21.74146 20.4429,59.67617 27.26542,78.65809 z"
- style="display:inline;opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- inkscape:connector-curvature="0" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter4185">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="3.6164709"
- id="feGaussianBlur4187" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter4105">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="3.8640966"
- id="feGaussianBlur4107" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath2833">
- <path
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#292929;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 569.03125,1018.7776 c -4.28571,0.7143 -27.62815,3.6181 -57.85714,10 -30.22899,6.3819 -57.31395,4.9661 -135.78608,17.3296 -79.85178,12.5808 -94.06436,42.5423 -108.12225,47.0643 -14.70014,4.7286 -145.37739,-65.8225 -145.37739,-65.8225 l 4.28572,-94.28571 c 0,0 85.88551,-16.20094 112.14285,-33.57143 26.25735,-17.37049 45.58238,-49.66598 59.28572,-71.42857 13.70334,-21.76259 32.85714,-71.42858 32.85714,-71.42858 l 238.57143,262.14289 z"
- id="path2835"
- sodipodi:nodetypes="czzzcczzcc"
- inkscape:connector-curvature="0" />
- </clipPath>
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient2843"
- id="linearGradient2841"
- gradientUnits="userSpaceOnUse"
- x1="347.89655"
- y1="1070.2124"
- x2="275.58191"
- y2="867.97992" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3627"
- id="linearGradient3688"
- gradientUnits="userSpaceOnUse"
- x1="699.32867"
- y1="269.76755"
- x2="698.97504"
- y2="346.1351" />
- <mask
- maskUnits="userSpaceOnUse"
- id="mask3684">
- <ellipse
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:url(#linearGradient3688);fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.43724918px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- id="path3686"
- transform="translate(-174.03125,62.156036)"
- cx="579.474"
- cy="260.57516"
- rx="192.6866"
- ry="164.04877" />
- </mask>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3622">
- <path
- style="display:inline;opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 266.27183,924.57186 c -1.40727,18.80121 -1.1449,32.75103 2.08174,49.30328 3.22665,16.55234 16.40608,45.90736 20.3344,63.18376 3.92622,17.2671 2.69413,38.3096 -12.45944,51.1482 -15.31761,12.9774 -42.05127,21.5989 -67.8323,15.7338 -25.78106,-5.8653 -69.54907,-49.2234 -88.59019,-70.2283 C 100.6939,1012.6293 56.045183,939.86194 41.867508,909.43681 27.689836,879.01169 29.207903,872.71824 33.747793,863.90708 24.381071,839.38658 21.334081,813.84027 0.03533552,788.33044 30.360815,791.44488 43.915625,815.28677 60.161025,835.47019 54.631129,787.39416 42.10631,771.05369 31.787073,744.74589 c 29.994295,6.08166 50.57936,31.8724 63.979783,72.7125 9.554154,-3.91791 18.237764,-9.37294 30.187414,-9.0612 -11.2975,-41.6958 -17.94946,-69.91584 -36.687255,-101.06994 53.441965,5.67033 83.657025,80.63932 78.971425,87.9608 9.97797,-2.24399 19.00565,-6.53038 30.43653,-5.65167 -11.24896,-38.34702 -21.04781,-76.8679 -3.65971,-118.64818 0,0 48.28678,65.43687 54.38966,85.80577 6.10287,20.36891 1.51881,38.70052 1.51881,38.70052 0,0 16.95957,31.08529 20.29392,51.09413 3.3731,20.24135 -3.53269,59.10332 -4.94582,77.98324 z"
- id="path3624"
- sodipodi:nodetypes="czzzzzzcccccccccczczz"
- inkscape:connector-curvature="0" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3636">
- <path
- style="display:inline;opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 760.16396,935.83377 c 6.7941,18.90279 10.49369,33.29969 11.8903,51.21189 1.39662,17.91234 -3.78268,51.80084 -2.90046,70.65614 0.88175,18.8452 8.13369,40.099 27.34463,48.9689 19.41887,8.9658 49.31924,10.2113 74.11984,-3.1456 24.8006,-13.357 57.40102,-70.3255 70.97426,-97.3087 13.62385,-27.08394 38.76107,-114.49737 44.6608,-149.76859 5.89973,-35.27121 2.55054,-41.30077 -4.61748,-49.05549 2.6403,-27.84015 -1.49972,-54.93543 13.10969,-87.18618 -30.24901,11.8257 -37.38229,40.1607 -48.31889,65.50508 -8.00091,-50.93293 0.20916,-71.27319 3.31889,-101.21936 -29.06476,14.77791 -42.86151,47.11402 -45,92.85714 -10.92395,-1.3042 -21.39144,-4.43423 -33.57143,-0.71429 -0.26404,-46.02334 -1.46356,-76.88941 8.91063,-114.20649 -53.25547,21.02686 -62.94728,106.5941 -56.05349,112.77792 -10.88282,0.535 -21.37108,-1.2973 -32.85714,2.85715 0.63892,-42.57135 -0.26046,-84.90861 -30,-122.85715 0,0 -30.95806,80.92234 -31.42857,103.57143 -0.47051,22.64909 9.45159,40.16588 9.45159,40.16588 0,0 -8.56807,36.74051 -6.29859,58.23223 2.29585,21.74146 20.4429,59.67617 27.26542,78.65809 z"
- id="path3638"
- sodipodi:nodetypes="czzzzzzcccccccccczczz"
- inkscape:connector-curvature="0" />
- </clipPath>
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3660"
- id="linearGradient3666"
- x1="1255.7386"
- y1="667.09216"
- x2="893.69995"
- y2="858.01099"
- gradientUnits="userSpaceOnUse" />
- <filter
- inkscape:collect="always"
- id="filter3779"
- x="-0.087980822"
- width="1.1759616"
- y="-0.17728332"
- height="1.3545666">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="16.340344"
- id="feGaussianBlur3781" />
- </filter>
- <filter
- id="filter3785"
- inkscape:label="White Fur">
- <feTurbulence
- id="feTurbulence3787"
- type="fractalNoise"
- baseFrequency="0.24044943820224721"
- numOctaves="10"
- seed="655"
- result="result0" />
- <feDisplacementMap
- id="feDisplacementMap3789"
- in="SourceGraphic"
- in2="result0"
- scale="62"
- xChannelSelector="B"
- yChannelSelector="G" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter3677">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="2.0397518"
- id="feGaussianBlur3679" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3722">
- <path
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 709.28572,844.50504 c 54.28571,-1.42857 126.035,-15.05199 170,-26.78572 44.05271,-11.75714 125.88628,-36.34724 175.35708,-57.85714 49.3393,-21.45272 113.6037,-59.2816 154.2858,-92.14285 40.5081,-32.72069 52.3899,-55.81981 60.7143,-33.57143 8.3691,22.36779 -16.407,56.32562 -37.8572,81.07143 -21.6041,24.9234 -52.7313,52.70533 -98.9286,89.28571 C 1086.6598,841.08542 976.77458,906.08967 920,933.07647 c -57.06606,27.12536 -128.20334,58.23842 -172.14286,72.50003 -43.93952,14.2616 -131.42857,31.0714 -131.42857,31.0714 l 92.85715,-192.14286 z"
- id="path3724"
- sodipodi:nodetypes="czzzzzzzzcc"
- inkscape:connector-curvature="0" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3986">
- <path
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 709.28572,844.50504 c 54.28571,-1.42857 126.035,-15.05199 170,-26.78572 44.05271,-11.75714 125.88628,-36.34724 175.35708,-57.85714 49.3393,-21.45272 113.6037,-59.2816 154.2858,-92.14285 40.5081,-32.72069 52.3899,-55.81981 60.7143,-33.57143 8.3691,22.36779 -16.407,56.32562 -37.8572,81.07143 -21.6041,24.9234 -52.7313,52.70533 -98.9286,89.28571 C 1086.6598,841.08542 976.77458,906.08967 920,933.07647 c -57.06606,27.12536 -128.20334,58.23842 -172.14286,72.50003 -43.93952,14.2616 -131.42857,31.0714 -131.42857,31.0714 l 92.85715,-192.14286 z"
- id="path3988"
- sodipodi:nodetypes="czzzzzzzzcc"
- inkscape:connector-curvature="0" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3992">
- <path
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 709.28572,844.50504 c 54.28571,-1.42857 126.035,-15.05199 170,-26.78572 44.05271,-11.75714 125.88628,-36.34724 175.35708,-57.85714 49.3393,-21.45272 113.6037,-59.2816 154.2858,-92.14285 40.5081,-32.72069 52.3899,-55.81981 60.7143,-33.57143 8.3691,22.36779 -16.407,56.32562 -37.8572,81.07143 -21.6041,24.9234 -52.7313,52.70533 -98.9286,89.28571 C 1086.6598,841.08542 976.77458,906.08967 920,933.07647 c -57.06606,27.12536 -128.20334,58.23842 -172.14286,72.50003 -43.93952,14.2616 -131.42857,31.0714 -131.42857,31.0714 l 92.85715,-192.14286 z"
- id="path3994"
- sodipodi:nodetypes="czzzzzzzzcc"
- inkscape:connector-curvature="0" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3998">
- <path
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 178.21428,274.14789 c -3.80443,-25.26423 -16.80972,-50.63802 -17.1568,-75.52523 -0.18626,-13.35552 3.27285,-26.57091 13.75553,-39.55405 36.34702,-65.295835 116.94091,-84.694685 185.93466,-91.465427 86.92239,-11.016801 184.91267,17.940072 233.37134,95.401287 54.12402,75.7333 56.67476,172.53912 80.61204,259.52795 29.43779,127.1276 54.77914,256.21414 60.39224,386.85035 -3.06348,78.18185 -8.42634,165.18415 -60.50321,228.13413 -48.02654,50.3574 -122.78647,50.053 -187.06988,59.0023 -90.55539,4.655 -184.35153,-16.1458 -261.7839,-64.1982 -64.77564,-37.94001 -95.73019,-113.47863 -97.2794,-186.01958 -8.38917,-79.87516 26.39152,-153.80851 51.6204,-227.15961 7.47061,-82.76107 9.41286,-166.24775 9.65334,-249.38484 -0.83682,-32.19544 -7.08953,-63.81733 -11.54636,-95.60908 z"
- id="path4000"
- sodipodi:nodetypes="cscccccccccccc"
- inkscape:connector-curvature="0" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter4002"
- x="-0.24334238"
- width="1.4866848"
- y="-0.39104807"
- height="1.7820961">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="14.589518"
- id="feGaussianBlur4004" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter4010"
- x="-0.14577261"
- width="1.2915452"
- y="-0.23523259"
- height="1.4704652">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="4.4442907"
- id="feGaussianBlur4012" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter4053">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.6062947"
- id="feGaussianBlur4055" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter4079">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="6.5887624"
- id="feGaussianBlur4081" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter4083">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.5052066"
- id="feGaussianBlur4085" />
- </filter>
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4113"
- id="radialGradient4119"
- cx="296.33783"
- cy="427.17749"
- fx="296.33783"
- fy="427.17749"
- r="19.704132"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(2.9797125,0,0,2.9797125,-599.28727,-827.0855)" />
- <filter
- inkscape:collect="always"
- id="filter6949"
- x="-0.10294895"
- width="1.2058979"
- y="-0.34224695"
- height="1.6844939">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6951" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6953"
- x="-0.098320946"
- width="1.1966419"
- y="-0.19750816"
- height="1.3950163">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6955" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6957"
- x="-0.098213427"
- width="1.1964267"
- y="-0.19838208"
- height="1.3967642">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6959" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6961"
- x="-0.09919104"
- width="1.1983821"
- y="-0.22643611"
- height="1.4528722">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6963" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6965"
- x="-0.099081434"
- width="1.1981629"
- y="-0.22529824"
- height="1.4505965">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6967" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6969"
- x="-0.10450897"
- width="1.2090179"
- y="-0.40468886"
- height="1.8093777">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6971" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6973"
- x="-0.10330495"
- width="1.2066098"
- y="-0.36439717"
- height="1.7287945">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6975" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6977"
- x="-0.10224481"
- width="1.2044896"
- y="-0.32371372"
- height="1.6474274">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6979" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6981"
- x="-0.10052545"
- width="1.2010509"
- y="-0.2742162"
- height="1.5484324">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6983" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6985"
- x="-0.098428868"
- width="1.1968577"
- y="-0.20853186"
- height="1.4170637">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6987" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6989"
- x="-0.098428868"
- width="1.1968577"
- y="-0.20287035"
- height="1.4057407">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6991" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6993"
- x="-0.098213255"
- width="1.1964265"
- y="-0.19838208"
- height="1.3967642">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6995" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6997">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6999" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7001">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur7003" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7285"
- x="-0.030884685"
- width="1.0617694"
- y="-0.10267408"
- height="1.2053483">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7287" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7289">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7291" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7293">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7295" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7297">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7299" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7301">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7303" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7305">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7307" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7309">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7311" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7313">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7315" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7317">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7319" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7321">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7323" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7325"
- x="-0.031352691"
- width="1.0627054"
- y="-0.12140666"
- height="1.2428133">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7327" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7329"
- x="-0.030991485"
- width="1.061983"
- y="-0.10931916"
- height="1.2186383">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7331" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7333">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7335" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7337">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7339" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7345">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.7233839"
- id="feGaussianBlur7347" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath7421">
- <path
- sodipodi:type="inkscape:offset"
- inkscape:radius="0"
- inkscape:original="M 1111.4062 -285.9375 L 1107.4688 -284.0625 C 1107.4283 -284.05228 1107.3692 -284.04201 1107.3438 -284.03125 C 1106.925 -283.8184 1107.1791 -283.93067 1106.6875 -283.71875 C 1106.2014 -283.50919 1104.9499 -283.13456 1102.5938 -282.25 C 1099.2626 -280.99942 1096.7895 -280.10016 1095.5938 -279.1875 C 1094.0576 -279.16623 1091.8733 -278.95419 1089.9375 -278.46875 C 1086.956 -277.72108 1085.0823 -277.29474 1083.1875 -276.875 C 1081.2927 -276.45527 1081.512 -276.23281 1080.3125 -276 C 1079.0159 -275.74833 1078.5911 -276.00899 1074.875 -275.21875 C 1071.3851 -274.4766 1065.9802 -273.28768 1064.7188 -272.53125 C 1063.1348 -272.71203 1060.8513 -272.85303 1058.875 -272.5625 C 1055.8346 -272.11554 1053.9588 -271.88974 1052.0312 -271.65625 C 1051.3758 -271.57687 1050.9902 -271.45547 1050.6875 -271.375 C 1050.2613 -271.24334 1050.0017 -271.11498 1049.3125 -271.03125 C 1048.0009 -270.87188 1047.5503 -271.18808 1043.7812 -270.75 C 1040.2273 -270.33691 1034.7758 -269.47718 1033.5312 -268.8125 C 1031.9322 -269.10979 1029.6735 -269.34669 1027.6875 -269.15625 C 1024.6287 -268.86293 1022.7155 -268.67226 1020.7812 -268.5 C 1018.847 -268.32773 1019.0926 -268.07763 1017.875 -267.96875 C 1016.5588 -267.85105 1016.1152 -268.13238 1012.3438 -267.71875 C 1008.8017 -267.3303 1003.3359 -266.50948 1002.0625 -265.84375 C 1000.4636 -266.13844 998.1753 -266.35076 996.1875 -266.15625 C 993.12921 -265.857 991.2463 -265.67601 989.3125 -265.5 C 988.65501 -265.44015 988.27245 -265.32144 987.96875 -265.25 C 987.54105 -265.13104 987.28525 -265.03193 986.59375 -264.96875 C 985.27775 -264.84849 984.834 -265.16363 981.0625 -264.75 C 977.50631 -264.35998 972.0569 -263.51084 970.8125 -262.84375 C 969.21381 -263.13793 966.95265 -263.36747 964.96875 -263.15625 C 961.91305 -262.83092 959.9947 -262.63001 958.0625 -262.4375 C 956.13031 -262.24499 956.37275 -261.99662 955.15625 -261.875 C 953.84137 -261.74353 953.3932 -262.03954 949.625 -261.59375 C 946.08611 -261.17509 940.6473 -260.30158 939.375 -259.625 C 937.77741 -259.90604 935.51505 -260.04543 933.53125 -259.8125 C 930.47927 -259.45413 928.58625 -259.24464 926.65625 -259.03125 C 926.00007 -258.95869 925.6156 -258.85856 925.3125 -258.78125 C 924.88571 -258.65402 924.6276 -258.51405 923.9375 -258.4375 C 922.62411 -258.29181 922.17015 -258.61152 918.40625 -258.125 C 914.85737 -257.66624 909.4276 -256.70598 908.1875 -256 C 906.59441 -256.24424 904.3537 -256.38135 902.375 -256.125 C 899.32741 -255.73018 897.4243 -255.47655 895.5 -255.21875 C 893.57571 -254.96096 893.7739 -254.72522 892.5625 -254.5625 C 891.25301 -254.3866 890.8153 -254.66688 887.0625 -254.09375 C 883.53821 -253.55551 878.1393 -252.39458 876.875 -251.65625 C 875.28751 -251.85979 873.0295 -251.91098 871.0625 -251.5625 C 868.03631 -251.02638 866.1636 -250.70081 864.25 -250.375 C 863.59941 -250.26423 863.2363 -250.10406 862.9375 -250 C 862.51681 -249.83512 862.27405 -249.6687 861.59375 -249.53125 C 860.29905 -249.26966 859.86665 -249.53745 856.15625 -248.71875 C 852.65777 -247.9468 847.31035 -246.33582 846.09375 -245.5 C 844.53085 -245.57745 842.33625 -245.41472 840.40625 -244.90625 C 837.43387 -244.12312 835.58855 -243.67416 833.71875 -243.15625 C 831.84875 -242.63835 832.0521 -242.38897 830.875 -242.0625 C 829.60251 -241.7096 829.17795 -241.95541 825.53125 -240.875 C 822.10657 -239.86037 816.88185 -237.94183 815.65625 -237.03125 C 814.11747 -237.01851 811.93645 -236.75903 810.03125 -236.15625 C 807.10027 -235.22891 805.2809 -234.69783 803.4375 -234.09375 C 802.81071 -233.88837 802.44585 -233.70117 802.15625 -233.5625 C 801.74867 -233.34889 801.50295 -233.15375 800.84375 -232.9375 C 799.58925 -232.52596 799.1576 -232.74846 795.5625 -231.5 C 792.17261 -230.32283 786.96755 -228.2863 785.78125 -227.34375 C 784.25737 -227.28408 782.1312 -226.94888 780.25 -226.28125 C 777.35261 -225.25296 775.55095 -224.60577 773.71875 -223.96875 C 771.88655 -223.33174 772.0909 -223.12021 770.9375 -222.71875 C 769.69071 -222.28479 769.27395 -222.51903 765.71875 -221.15625 C 762.38005 -219.87645 757.23165 -217.6737 756.03125 -216.6875 C 754.52407 -216.57981 752.39555 -216.1887 750.53125 -215.46875 C 747.66307 -214.36115 745.90735 -213.68719 744.09375 -213 C 743.47705 -212.76637 743.0973 -212.55797 742.8125 -212.40625 C 742.81251 -212.40625 742.8125 -212.37673 742.8125 -212.375 L 734.8125 -209.1875 L 736.625 -194.46875 C 736.36701 -194.52956 742.8125 -191.15625 742.8125 -191.15625 C 743.03891 -191.30093 743.26145 -191.42886 743.53125 -191.53125 C 744.61177 -191.94123 745.70285 -191.74702 749.53125 -193.21875 C 753.35977 -194.69049 754.7553 -195.22373 755.4375 -195.625 C 756.11711 -196.02478 757.04925 -196.50437 757.65625 -197.15625 C 759.48317 -197.294 761.22705 -197.64948 762.59375 -198.15625 C 765.56175 -199.25677 767.4691 -199.96244 769.375 -200.625 C 771.28081 -201.28754 771.72915 -202.03987 772.78125 -202.40625 C 773.87287 -202.78636 774.97635 -202.57163 778.84375 -203.9375 C 782.71115 -205.30336 784.1269 -205.76458 784.8125 -206.15625 C 785.51361 -206.55677 786.5133 -207.08923 787.125 -207.75 C 789.09581 -207.80466 790.94195 -208.13463 792.40625 -208.625 C 795.40777 -209.63008 797.3324 -210.24671 799.25 -210.875 C 800.78861 -211.3791 801.42415 -211.92177 802.15625 -212.3125 C 802.38647 -212.44681 802.63215 -212.56623 802.90625 -212.65625 C 804.00457 -213.01673 805.0877 -212.73762 809 -213.96875 C 812.91231 -215.19988 814.366 -215.6417 815.0625 -216 C 815.75641 -216.35697 816.6926 -216.79261 817.3125 -217.40625 C 819.17771 -217.42891 820.94835 -217.67308 822.34375 -218.09375 C 825.37415 -219.00729 827.33615 -219.52385 829.28125 -220.0625 C 831.22637 -220.60114 831.70745 -221.32702 832.78125 -221.625 C 833.89527 -221.93415 835.00125 -221.61761 838.96875 -222.65625 C 842.93625 -223.69488 844.38625 -224.08898 845.09375 -224.40625 C 845.82855 -224.73584 846.90765 -225.15997 847.53125 -225.78125 C 849.52907 -225.66525 851.3887 -225.80134 852.875 -226.15625 C 855.95311 -226.89125 857.9584 -227.25719 859.9375 -227.65625 C 861.52541 -227.97643 862.1818 -228.4468 862.9375 -228.75 C 863.17501 -228.8568 863.4044 -228.94276 863.6875 -229 C 864.82091 -229.22919 865.99215 -228.79107 870.03125 -229.5 C 874.07067 -230.20893 875.5315 -230.42709 876.25 -230.6875 C 876.96581 -230.94694 877.95435 -231.25474 878.59375 -231.78125 C 880.51795 -231.54176 882.34165 -231.55672 883.78125 -231.78125 C 886.90767 -232.26887 888.9358 -232.48192 890.9375 -232.75 C 892.93921 -233.01807 893.42625 -233.69514 894.53125 -233.84375 C 895.67767 -233.99793 896.8071 -233.54218 900.875 -234.0625 C 904.94281 -234.58282 906.43525 -234.75823 907.15625 -235 C 907.89337 -235.24714 908.95435 -235.58623 909.59375 -236.125 C 911.64375 -235.78947 913.56745 -235.72704 915.09375 -235.90625 C 918.23595 -236.27521 920.27375 -236.46561 922.28125 -236.6875 C 923.89207 -236.86552 924.5459 -237.2957 925.3125 -237.53125 C 925.55341 -237.61677 925.80655 -237.68685 926.09375 -237.71875 C 927.24345 -237.84647 928.39505 -237.3721 932.46875 -237.84375 C 936.54245 -238.3154 938.0278 -238.45435 938.75 -238.6875 C 939.46941 -238.91977 940.45025 -239.16096 941.09375 -239.65625 C 943.03005 -239.32279 944.8638 -239.25201 946.3125 -239.40625 C 949.45851 -239.7412 951.49 -239.92484 953.5 -240.125 C 955.50991 -240.32514 955.98415 -240.95139 957.09375 -241.0625 C 958.24485 -241.17778 959.39025 -240.69744 963.46875 -241.125 C 967.54725 -241.55256 969.05765 -241.68709 969.78125 -241.90625 C 970.52047 -242.13011 971.57685 -242.4195 972.21875 -242.9375 C 974.27575 -242.53883 976.2206 -242.4441 977.75 -242.59375 C 980.89871 -242.90185 982.9258 -243.067 984.9375 -243.25 C 986.55151 -243.39682 987.20055 -243.81055 987.96875 -244.03125 C 988.21005 -244.11211 988.4623 -244.16116 988.75 -244.1875 C 989.90211 -244.29295 991.0429 -243.79475 995.125 -244.1875 C 999.20711 -244.58025 1000.7139 -244.71834 1001.4375 -244.9375 C 1002.1584 -245.15583 1003.1371 -245.3852 1003.7812 -245.875 C 1005.7193 -245.52501 1007.5501 -245.42062 1009 -245.5625 C 1012.1487 -245.8706 1014.1758 -246.03575 1016.1875 -246.21875 C 1018.1991 -246.40174 1018.7017 -247.05677 1019.8125 -247.15625 C 1020.9648 -247.25948 1022.1047 -246.77142 1026.1875 -247.15625 C 1030.2704 -247.54107 1031.7762 -247.65725 1032.5 -247.875 C 1033.2393 -248.09743 1034.2956 -248.38949 1034.9375 -248.90625 C 1036.9949 -248.50448 1038.9404 -248.40292 1040.4688 -248.5625 C 1043.6153 -248.89102 1045.6458 -249.0852 1047.6562 -249.28125 C 1049.2692 -249.43854 1049.9219 -249.91273 1050.6875 -250.15625 C 1050.9282 -250.24429 1051.1507 -250.27762 1051.4375 -250.3125 C 1052.5858 -250.4522 1053.7542 -249.97259 1057.8125 -250.5625 C 1061.8708 -251.15242 1063.3743 -251.33964 1064.0938 -251.59375 C 1064.8104 -251.84691 1065.7684 -252.15182 1066.4062 -252.6875 C 1068.3259 -252.47556 1070.1262 -252.53609 1071.5625 -252.78125 C 1074.6816 -253.31365 1076.6741 -253.70986 1078.6562 -254.09375 C 1080.6383 -254.47762 1081.1305 -255.1334 1082.2188 -255.375 C 1083.3475 -255.62566 1084.489 -255.25871 1088.4688 -256.25 C 1092.4483 -257.24127 1093.8983 -257.6693 1094.5938 -258.03125 C 1095.316 -258.40725 1096.3555 -258.90183 1096.9688 -259.5625 C 1098.9317 -259.57454 1100.7625 -259.85355 1102.1875 -260.40625 C 1105.1387 -261.55085 1107.0607 -262.27567 1108.875 -263.15625 C 1110.3307 -263.86277 1111.1941 -264.85828 1111.4062 -265.15625 C 1111.6185 -265.4542 1111.5051 -265.8848 1111.5312 -265.90625 C 1111.5742 -265.94148 1111.8716 -266.00028 1112.0312 -266.34375 C 1112.8902 -268.19082 1114.3544 -271.97139 1114.4688 -272.65625 C 1114.5825 -273.33839 1114.6368 -274.00902 1114.6875 -274.40625 C 1114.7169 -274.63575 1114.5404 -275.28515 1114.5625 -275.34375 C 1114.5934 -275.42579 1114.8508 -275.59432 1114.9062 -275.84375 C 1115.1725 -277.04206 1114.9953 -278.05111 1114.7812 -279.46875 C 1114.5673 -280.88638 1113.8096 -284.08338 1113.1562 -284.9375 C 1112.4973 -285.79922 1111.9314 -285.94801 1111.4062 -285.9375 z "
- style="display:inline;fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- id="path7423"
- d="m 1111.4062,-285.9375 -3.9374,1.875 c -0.041,0.0102 -0.1,0.0205 -0.125,0.0312 -0.4188,0.21285 -0.1647,0.10058 -0.6563,0.3125 -0.4861,0.20956 -1.7376,0.58419 -4.0937,1.46875 -3.3312,1.25058 -5.8043,2.14984 -7,3.0625 -1.5362,0.0213 -3.7205,0.23331 -5.6563,0.71875 -2.9815,0.74767 -4.8552,1.17401 -6.75,1.59375 -1.8948,0.41973 -1.6755,0.64219 -2.875,0.875 -1.2966,0.25167 -1.7214,-0.009 -5.4375,0.78125 -3.4899,0.74215 -8.8948,1.93107 -10.1562,2.6875 -1.584,-0.18078 -3.8675,-0.32178 -5.8438,-0.0312 -3.0404,0.44696 -4.9162,0.67276 -6.8438,0.90625 -0.6554,0.0794 -1.041,0.20078 -1.3437,0.28125 -0.4262,0.13166 -0.6858,0.26002 -1.375,0.34375 -1.3116,0.15937 -1.7622,-0.15683 -5.5313,0.28125 -3.5539,0.41309 -9.0054,1.27282 -10.25,1.9375 -1.599,-0.29729 -3.8577,-0.53419 -5.8437,-0.34375 -3.0588,0.29332 -4.972,0.48399 -6.9063,0.65625 -1.9342,0.17227 -1.6886,0.42237 -2.9062,0.53125 -1.3162,0.1177 -1.7598,-0.16363 -5.5312,0.25 -3.5421,0.38845 -9.0079,1.20927 -10.2813,1.875 -1.5989,-0.29469 -3.8872,-0.50701 -5.875,-0.3125 -3.05829,0.29925 -4.9412,0.48024 -6.875,0.65625 -0.65749,0.0598 -1.04005,0.17856 -1.34375,0.25 -0.4277,0.11896 -0.6835,0.21807 -1.375,0.28125 -1.316,0.12026 -1.75975,-0.19488 -5.53125,0.21875 -3.55619,0.39002 -9.0056,1.23916 -10.25,1.90625 -1.59869,-0.29418 -3.85985,-0.52372 -5.84375,-0.3125 -3.0557,0.32533 -4.97405,0.52624 -6.90625,0.71875 -1.93219,0.19251 -1.68975,0.44088 -2.90625,0.5625 -1.31488,0.13147 -1.76305,-0.16454 -5.53125,0.28125 -3.53889,0.41866 -8.9777,1.29217 -10.25,1.96875 -1.59759,-0.28104 -3.85995,-0.42043 -5.84375,-0.1875 -3.05198,0.35837 -4.945,0.56786 -6.875,0.78125 -0.65618,0.0726 -1.04065,0.17269 -1.34375,0.25 -0.42679,0.12723 -0.6849,0.2672 -1.375,0.34375 -1.31339,0.14569 -1.76735,-0.17402 -5.53125,0.3125 -3.54888,0.45876 -8.97865,1.41902 -10.21875,2.125 -1.59309,-0.24424 -3.8338,-0.38135 -5.8125,-0.125 -3.04759,0.39482 -4.9507,0.64845 -6.875,0.90625 -1.92429,0.25779 -1.7261,0.49353 -2.9375,0.65625 -1.30949,0.1759 -1.7472,-0.10438 -5.5,0.46875 -3.52429,0.53824 -8.9232,1.69917 -10.1875,2.4375 -1.58749,-0.20354 -3.8455,-0.25473 -5.8125,0.0937 -3.02619,0.53612 -4.8989,0.86169 -6.8125,1.1875 -0.65059,0.11077 -1.0137,0.27094 -1.3125,0.375 -0.42069,0.16488 -0.66345,0.3313 -1.34375,0.46875 -1.2947,0.26159 -1.7271,-0.006 -5.4375,0.8125 -3.49848,0.77195 -8.8459,2.38293 -10.0625,3.21875 -1.5629,-0.0774 -3.7575,0.0853 -5.6875,0.59375 -2.97238,0.78313 -4.8177,1.23209 -6.6875,1.75 -1.87,0.5179 -1.66665,0.76728 -2.84375,1.09375 -1.27249,0.3529 -1.69705,0.10709 -5.34375,1.1875 -3.42468,1.01463 -8.6494,2.93317 -9.875,3.84375 -1.53878,0.0127 -3.7198,0.27222 -5.625,0.875 -2.93098,0.92734 -4.75035,1.45842 -6.59375,2.0625 -0.62679,0.20538 -0.99165,0.39258 -1.28125,0.53125 -0.40758,0.21361 -0.6533,0.40875 -1.3125,0.625 -1.2545,0.41154 -1.68615,0.18904 -5.28125,1.4375 -3.38989,1.17717 -8.59495,3.2137 -9.78125,4.15625 -1.52388,0.0597 -3.65005,0.39487 -5.53125,1.0625 -2.89739,1.02829 -4.69905,1.67548 -6.53125,2.3125 -1.8322,0.63701 -1.62785,0.84854 -2.78125,1.25 -1.24679,0.43396 -1.66355,0.19972 -5.21875,1.5625 -3.3387,1.2798 -8.4871,3.48255 -9.6875,4.46875 -1.50718,0.10769 -3.6357,0.4988 -5.5,1.21875 -2.86818,1.1076 -4.6239,1.78156 -6.4375,2.46875 -0.6167,0.23363 -0.99645,0.44203 -1.28125,0.59375 10e-6,0 0,0.0295 0,0.0312 l -8,3.1875 1.8125,14.71875 c -0.25799,-0.0608 6.1875,3.3125 6.1875,3.3125 0.22641,-0.14468 0.44895,-0.27261 0.71875,-0.375 1.08052,-0.40998 2.1716,-0.21577 6,-1.6875 3.82852,-1.47174 5.22405,-2.00498 5.90625,-2.40625 0.67961,-0.39978 1.61175,-0.87937 2.21875,-1.53125 1.82692,-0.13775 3.5708,-0.49323 4.9375,-1 2.968,-1.10052 4.87535,-1.80619 6.78125,-2.46875 1.90581,-0.66254 2.35415,-1.41487 3.40625,-1.78125 1.09162,-0.38011 2.1951,-0.16538 6.0625,-1.53125 3.8674,-1.36586 5.28315,-1.82708 5.96875,-2.21875 0.70111,-0.40052 1.7008,-0.93298 2.3125,-1.59375 1.97081,-0.0547 3.81695,-0.38463 5.28125,-0.875 3.00152,-1.00508 4.92615,-1.62171 6.84375,-2.25 1.53861,-0.5041 2.17415,-1.04677 2.90625,-1.4375 0.23022,-0.13431 0.4759,-0.25373 0.75,-0.34375 1.09832,-0.36048 2.18145,-0.0814 6.09375,-1.3125 3.91231,-1.23113 5.366,-1.67295 6.0625,-2.03125 0.69391,-0.35697 1.6301,-0.79261 2.25,-1.40625 1.86521,-0.0227 3.63585,-0.26683 5.03125,-0.6875 3.0304,-0.91354 4.9924,-1.4301 6.9375,-1.96875 1.94512,-0.53864 2.4262,-1.26452 3.5,-1.5625 1.11402,-0.30915 2.22,0.007 6.1875,-1.03125 3.9675,-1.03863 5.4175,-1.43273 6.125,-1.75 0.7348,-0.32959 1.8139,-0.75372 2.4375,-1.375 1.99782,0.116 3.85745,-0.0201 5.34375,-0.375 3.07811,-0.735 5.0834,-1.10094 7.0625,-1.5 1.58791,-0.32018 2.2443,-0.79055 3,-1.09375 0.23751,-0.1068 0.4669,-0.19276 0.75,-0.25 1.13341,-0.22919 2.30465,0.20893 6.34375,-0.5 4.03942,-0.70893 5.50025,-0.92709 6.21875,-1.1875 0.71581,-0.25944 1.70435,-0.56724 2.34375,-1.09375 1.9242,0.23949 3.7479,0.22453 5.1875,0 3.12642,-0.48762 5.15455,-0.70067 7.15625,-0.96875 2.00171,-0.26807 2.48875,-0.94514 3.59375,-1.09375 1.14642,-0.15418 2.27585,0.30157 6.34375,-0.21875 4.06781,-0.52032 5.56025,-0.69573 6.28125,-0.9375 0.73712,-0.24714 1.7981,-0.58623 2.4375,-1.125 2.05,0.33553 3.9737,0.39796 5.5,0.21875 3.1422,-0.36896 5.18,-0.55936 7.1875,-0.78125 1.61082,-0.17802 2.26465,-0.6082 3.03125,-0.84375 0.24091,-0.0855 0.49405,-0.1556 0.78125,-0.1875 1.1497,-0.12772 2.3013,0.34665 6.375,-0.125 4.0737,-0.47165 5.55905,-0.6106 6.28125,-0.84375 0.71941,-0.23227 1.70025,-0.47346 2.34375,-0.96875 1.9363,0.33346 3.77005,0.40424 5.21875,0.25 3.14601,-0.33495 5.1775,-0.51859 7.1875,-0.71875 2.00991,-0.20014 2.48415,-0.82639 3.59375,-0.9375 1.1511,-0.11528 2.2965,0.36506 6.375,-0.0625 4.0785,-0.42756 5.5889,-0.56209 6.3125,-0.78125 0.73922,-0.22386 1.7956,-0.51325 2.4375,-1.03125 2.057,0.39867 4.00185,0.4934 5.53125,0.34375 3.14871,-0.3081 5.1758,-0.47325 7.1875,-0.65625 1.61401,-0.14682 2.26305,-0.56055 3.03125,-0.78125 0.2413,-0.0809 0.49355,-0.12991 0.78125,-0.15625 1.15211,-0.10545 2.2929,0.39275 6.375,0 4.08211,-0.39275 5.5889,-0.53084 6.3125,-0.75 0.7209,-0.21833 1.6996,-0.4477 2.3437,-0.9375 1.9381,0.34999 3.7689,0.45438 5.2188,0.3125 3.1487,-0.3081 5.1758,-0.47325 7.1875,-0.65625 2.0116,-0.18299 2.5142,-0.83802 3.625,-0.9375 1.1523,-0.10323 2.2922,0.38483 6.375,0 4.0829,-0.38482 5.5887,-0.501 6.3125,-0.71875 0.7393,-0.22243 1.7956,-0.51449 2.4375,-1.03125 2.0574,0.40177 4.0029,0.50333 5.5313,0.34375 3.1465,-0.32852 5.177,-0.5227 7.1874,-0.71875 1.613,-0.15729 2.2657,-0.63148 3.0313,-0.875 0.2407,-0.088 0.4632,-0.12137 0.75,-0.15625 1.1483,-0.1397 2.3167,0.33991 6.375,-0.25 4.0583,-0.58992 5.5618,-0.77714 6.2813,-1.03125 0.7166,-0.25316 1.6746,-0.55807 2.3124,-1.09375 1.9197,0.21194 3.72,0.15141 5.1563,-0.0937 3.1191,-0.5324 5.1116,-0.92861 7.0937,-1.3125 1.9821,-0.38387 2.4743,-1.03965 3.5626,-1.28125 1.1287,-0.25066 2.2702,0.11629 6.25,-0.875 3.9795,-0.99127 5.4295,-1.4193 6.125,-1.78125 0.7222,-0.376 1.7617,-0.87058 2.375,-1.53125 1.9629,-0.012 3.7937,-0.29105 5.2187,-0.84375 2.9512,-1.1446 4.8732,-1.86942 6.6875,-2.75 1.4557,-0.70652 2.3191,-1.70203 2.5312,-2 0.2123,-0.29795 0.099,-0.72855 0.125,-0.75 0.043,-0.0352 0.3404,-0.094 0.5,-0.4375 0.859,-1.84707 2.3232,-5.62764 2.4376,-6.3125 0.1137,-0.68214 0.168,-1.35277 0.2187,-1.75 0.029,-0.2295 -0.1471,-0.8789 -0.125,-0.9375 0.031,-0.082 0.2883,-0.25057 0.3437,-0.5 0.2663,-1.19831 0.089,-2.20736 -0.125,-3.625 -0.2139,-1.41763 -0.9716,-4.61463 -1.625,-5.46875 -0.6589,-0.86172 -1.2248,-1.01051 -1.75,-1 z"
- transform="translate(0.08004571,-0.03125)" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter7578"
- x="-0.08160872"
- width="1.1632174"
- y="-0.22659944"
- height="1.4531989">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="2.437399"
- id="feGaussianBlur7580" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7594"
- x="-0.040804356"
- width="1.0816087"
- y="-0.11329972"
- height="1.2265995">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.2186995"
- id="feGaussianBlur7596" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath7606">
- <path
- id="path7608"
- d="m 1049.205,-282.26672 -0.09,0.008 c -1.3874,0.88445 -6.6033,1.6072 -6.629,9.52344 -0.024,7.42525 15.0129,17.09146 17.1563,18.09375 1.7302,0.80909 3.5916,1.40876 5.4063,1.71875 l 1.4374,0.21875 c 1.9197,0.21194 3.72,0.15141 5.1563,-0.0937 3.1191,-0.5324 5.1116,-0.92861 7.0937,-1.3125 1.9821,-0.38387 2.4743,-1.03965 3.5626,-1.28125 1.1287,-0.25066 2.2702,0.11629 6.25,-0.875 3.9795,-0.99128 5.4294,-1.4193 6.125,-1.78125 0.7222,-0.37601 1.7617,-0.87058 2.375,-1.53125 1.9629,-0.012 3.7937,-0.29105 5.2187,-0.84375 2.9512,-1.14461 4.8732,-1.86942 6.6875,-2.75 1.4557,-0.70653 2.3191,-1.70203 2.5312,-2 0.2123,-0.29796 0.099,-0.72855 0.125,-0.75 0.043,-0.0352 0.3405,-0.094 0.5,-0.4375 0.859,-1.84708 2.3232,-5.62764 2.4376,-6.3125 0.1137,-0.68215 0.168,-1.35277 0.2187,-1.75 0.029,-0.22951 -0.1471,-0.8789 -0.125,-0.9375 0.031,-0.082 0.2883,-0.25057 0.3437,-0.5 0.2663,-1.19832 0.089,-2.20736 -0.125,-3.625 -0.2139,-1.41764 -0.9716,-4.61463 -1.625,-5.46875 -0.4194,-0.54857 -0.7993,-0.7925 -1.1562,-0.90625 -0.067,-0.0173 -0.1239,-0.0467 -0.1875,-0.0625 -0.021,-0.004 -0.042,0.003 -0.062,0 -0.3116,-0.0755 -0.6085,-0.15867 -1.1562,-0.21875 -0.9855,-0.10812 -2.4247,-0.2594 -3.9688,-0.25 -0.5147,0.003 -1.0371,0.0476 -1.5625,0.0937 -3.5589,0.31228 -9.0098,0.99108 -10.2187,1.625 -1.6331,-0.33402 -3.9482,-0.61223 -5.9376,-0.46875 -3.064,0.22097 -4.9677,0.34219 -6.9062,0.46875 -1.9384,0.12655 -1.6861,0.38864 -2.9062,0.46875 -1.3191,0.0866 -1.7869,-0.22325 -5.5626,0.0937 -3.5457,0.29772 -8.9806,0.99317 -10.2187,1.625 -1.6334,-0.33451 -3.9459,-0.61239 -5.9375,-0.46875 -3.0642,0.22098 -4.9678,0.37344 -6.9062,0.5 -0.6592,0.043 -1.0424,0.12393 -1.3438,0.1875 z"
- style="display:inline;opacity:0.82448976;fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- inkscape:connector-curvature="0" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter7610"
- x="-0.021942979"
- width="1.0438859"
- y="-0.10017137"
- height="1.2003427">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.57530213"
- id="feGaussianBlur7612" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath7616">
- <path
- id="path7618"
- d="m 205.47016,-408.97318 -0.0901,0.002 c -1.44563,0.78566 -6.69921,1.14335 -7.27625,9.03857 -0.54134,7.40553 13.78595,18.09566 15.85433,19.24481 1.66964,0.92764 3.48475,1.65551 5.27345,2.09115 l 1.41867,0.31834 c 1.90027,0.34514 3.70042,0.41015 5.15031,0.26563 3.1486,-0.31384 5.16386,-0.57031 7.16789,-0.8152 2.00402,-0.24488 2.5407,-0.86478 3.64319,-1.02999 1.14342,-0.17143 2.25659,0.27414 6.29577,-0.43753 4.03888,-0.71169 5.51507,-1.03768 6.23419,-1.3503 0.74664,-0.32479 1.81806,-0.74575 2.47589,-1.3621 1.95897,0.12471 3.80476,-0.0261 5.2648,-0.47819 3.02376,-0.93627 4.99157,-1.52544 6.8628,-2.27751 1.50138,-0.60342 2.43202,-1.53636 2.66436,-1.81883 0.23254,-0.28245 0.14951,-0.71989 0.17694,-0.73948 0.0453,-0.0322 0.34622,-0.0701 0.52926,-0.40161 0.98557,-1.78276 2.70955,-5.45215 2.87137,-6.12738 0.16094,-0.67257 0.26182,-1.33778 0.34007,-1.73051 0.0453,-0.22691 -0.0855,-0.88701 -0.0594,-0.94393 0.0365,-0.0797 0.30505,-0.22988 0.37769,-0.47485 0.34913,-1.17686 0.24274,-2.19578 0.1278,-3.6249 -0.11463,-1.42909 -0.64781,-4.6711 -1.24013,-5.56865 -0.38017,-0.57646 -0.74215,-0.84625 -1.09026,-0.98459 -0.0657,-0.0219 -0.12035,-0.0553 -0.1827,-0.0754 -0.0207,-0.005 -0.0418,2.3e-4 -0.0623,-0.004 -0.30559,-0.097 -0.59597,-0.20067 -1.13816,-0.29875 -0.97557,-0.1765 -2.40074,-0.42766 -3.94175,-0.52584 -0.51366,-0.0327 -1.0379,-0.0247 -1.56523,-0.0153 -3.57201,0.0636 -9.05695,0.3611 -10.30707,0.90928 -1.60587,-0.44697 -3.89597,-0.88576 -5.89053,-0.8812 -3.07195,0.007 -4.97947,-0.005 -6.92207,-0.0134 -1.94251,-0.009 -1.70908,0.27025 -2.9318,0.26518 -1.32192,-0.005 -1.76701,-0.34717 -5.55562,-0.29393 -3.55782,0.05 -9.02796,0.36522 -10.30706,0.90927 -1.60614,-0.44747 -3.89367,-0.88575 -5.89043,-0.88118 -3.07215,0.007 -4.98175,0.0265 -6.92426,0.0177 -0.66059,-0.003 -1.0485,0.051 -1.35359,0.0934 z"
- style="display:inline;opacity:0.82448976;fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- inkscape:connector-curvature="0" />
- </clipPath>
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient7622"
- id="linearGradient7708"
- gradientUnits="userSpaceOnUse"
- gradientTransform="translate(-19.091883,4.2426407)"
- x1="774.97668"
- y1="-211.87105"
- x2="755.11584"
- y2="-202.67865" />
- <mask
- maskUnits="userSpaceOnUse"
- id="mask7704">
- <path
- style="fill:url(#linearGradient7708);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
- d="m 718.40812,-224.31217 33.25,56 275.99998,-24 159.5,-48.25 -66.5,-82.75 -402.24998,99 z"
- id="path7706"
- inkscape:connector-curvature="0" />
- </mask>
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient8430"
- id="radialGradient7904"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(-0.3324832,0.9022288,-0.9582407,-0.3531242,305.29227,19.909497)"
- cx="142.95833"
- cy="107.09234"
- fx="142.95833"
- fy="107.09234"
- r="66.981766" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3317"
- id="radialGradient7906"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(1.0036478,-1.0345492e-7,1.7124628e-7,1.6613125,-160.53487,-96.205369)"
- cx="317.78754"
- cy="129.65378"
- fx="317.78754"
- fy="129.65378"
- r="47.863216" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient8398"
- id="radialGradient7908"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(2.0747661,-0.1577957,0.2382425,3.1325183,-550.77432,-65.728909)"
- cx="325.30847"
- cy="80.909554"
- fx="325.30847"
- fy="80.909554"
- r="26.937988" />
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8209">
- <path
- sodipodi:nodetypes="czcc"
- id="path8211"
- d="m 734.03125,519.49186 c 0,0 16.75513,37.01806 28.70141,53.95395 11.94629,16.93589 52.72716,56.04605 52.72716,56.04605 l 0.59717,-138.58975"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#1a1a1a;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- inkscape:connector-curvature="0" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter8225">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="10.661912"
- id="feGaussianBlur8227" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8333">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="7.18"
- id="feGaussianBlur8335" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8338">
- <path
- sodipodi:nodetypes="czzzzzzcccccccccczczz"
- id="path8340"
- d="m 266.27183,924.57185 c -1.40727,18.80122 -1.1449,32.75104 2.08174,49.30328 3.22666,16.55238 16.40609,45.90737 20.33441,63.18377 3.92621,17.2671 2.69413,38.3097 -12.45944,51.1482 -15.31761,12.9775 -42.05127,21.599 -67.8323,15.7338 -25.78106,-5.8653 -69.54908,-49.2234 -88.59019,-70.2283 C 100.6939,1012.6293 56.045182,939.86193 41.867507,909.4368 27.689835,879.01168 29.207902,872.71823 33.747792,863.90708 24.38107,839.38658 21.33408,813.84026 0.03533448,788.33044 30.360814,791.44487 43.915624,815.28676 60.161024,835.47019 54.631128,787.39416 42.106309,771.05368 31.787072,744.74589 c 29.994295,6.08165 50.57936,31.87239 63.979783,72.7125 9.554155,-3.91792 18.237765,-9.37294 30.187415,-9.0612 -11.2975,-41.6958 -17.94947,-69.91585 -36.687256,-101.06994 53.441966,5.67032 83.657026,80.63932 78.971426,87.9608 9.97797,-2.24399 19.00565,-6.53038 30.43653,-5.65167 -11.24897,-38.34703 -21.04782,-76.8679 -3.65971,-118.64819 0,0 48.28678,65.43688 54.38965,85.80578 6.10288,20.3689 1.51882,38.70051 1.51882,38.70051 0,0 16.95957,31.0853 20.29392,51.09414 3.3731,20.24134 -3.53269,59.10331 -4.94582,77.98323 z"
- style="display:inline;opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- inkscape:connector-curvature="0" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter8354">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="6.82"
- id="feGaussianBlur8356" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8359">
- <path
- sodipodi:nodetypes="czzzzzzcccccccccczczz"
- id="path8361"
- d="m 266.27183,924.57185 c -1.40727,18.80122 -1.1449,32.75104 2.08174,49.30328 3.22666,16.55238 16.40609,45.90737 20.33441,63.18377 3.92621,17.2671 2.69413,38.3097 -12.45944,51.1482 -15.31761,12.9775 -42.05127,21.599 -67.8323,15.7338 -25.78106,-5.8653 -69.54908,-49.2234 -88.59019,-70.2283 C 100.6939,1012.6293 56.045182,939.86193 41.867507,909.4368 27.689835,879.01168 29.207902,872.71823 33.747792,863.90708 24.38107,839.38658 21.33408,813.84026 0.03533448,788.33044 30.360814,791.44487 43.915624,815.28676 60.161024,835.47019 54.631128,787.39416 42.106309,771.05368 31.787072,744.74589 c 29.994295,6.08165 50.57936,31.87239 63.979783,72.7125 9.554155,-3.91792 18.237765,-9.37294 30.187415,-9.0612 -11.2975,-41.6958 -17.94947,-69.91585 -36.687256,-101.06994 53.441966,5.67032 83.657026,80.63932 78.971426,87.9608 9.97797,-2.24399 19.00565,-6.53038 30.43653,-5.65167 -11.24897,-38.34703 -21.04782,-76.8679 -3.65971,-118.64819 0,0 48.28678,65.43688 54.38965,85.80578 6.10288,20.3689 1.51882,38.70051 1.51882,38.70051 0,0 16.95957,31.0853 20.29392,51.09414 3.3731,20.24134 -3.53269,59.10331 -4.94582,77.98323 z"
- style="display:inline;opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- inkscape:connector-curvature="0" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter8379"
- x="-0.14413793"
- width="1.288276"
- y="-0.10278689"
- height="1.2055738">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="7.389266"
- id="feGaussianBlur8381" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8392">
- <path
- sodipodi:nodetypes="czzzzzzcccccccccczczz"
- id="path8394"
- d="m 760.16396,935.83377 c 6.7941,18.90279 10.49369,33.29969 11.8903,51.21189 1.39662,17.91234 -3.78268,51.80084 -2.90046,70.65614 0.88175,18.8452 8.13369,40.099 27.34463,48.9689 19.41887,8.9658 49.31924,10.2113 74.11984,-3.1456 24.8006,-13.357 57.40102,-70.3255 70.97426,-97.3087 13.62385,-27.08394 38.76107,-114.49737 44.6608,-149.76859 5.89973,-35.27121 2.55054,-41.30077 -4.61748,-49.05549 2.6403,-27.84015 -1.49972,-54.93543 13.10969,-87.18618 -30.24901,11.8257 -37.38229,40.1607 -48.31889,65.50508 -8.00091,-50.93293 0.20916,-71.27319 3.31889,-101.21936 -29.06476,14.77791 -42.86151,47.11402 -45,92.85714 -10.92395,-1.3042 -21.39144,-4.43423 -33.57143,-0.71429 -0.26404,-46.02334 -1.46356,-76.88941 8.91063,-114.20649 -53.25547,21.02686 -62.94728,106.5941 -56.05349,112.77792 -10.88282,0.535 -21.37108,-1.2973 -32.85714,2.85715 0.63892,-42.57135 -0.26046,-84.90861 -30,-122.85715 0,0 -30.95806,80.92234 -31.42857,103.57143 -0.47051,22.64909 9.45159,40.16588 9.45159,40.16588 0,0 -8.56807,36.74051 -6.29859,58.23223 2.29585,21.74146 20.4429,59.67617 27.26542,78.65809 z"
- style="display:inline;opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- inkscape:connector-curvature="0" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter8404"
- x="-0.090268657"
- width="1.1805373"
- y="-0.10250848"
- height="1.205017">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="5.3457272"
- id="feGaussianBlur8406" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8417">
- <path
- sodipodi:nodetypes="czzzzzzcccccccccczczz"
- id="path8419"
- d="m 760.16396,935.83377 c 6.7941,18.90279 10.49369,33.29969 11.8903,51.21189 1.39662,17.91234 -3.78268,51.80084 -2.90046,70.65614 0.88175,18.8452 8.13369,40.099 27.34463,48.9689 19.41887,8.9658 49.31924,10.2113 74.11984,-3.1456 24.8006,-13.357 57.40102,-70.3255 70.97426,-97.3087 13.62385,-27.08394 38.76107,-114.49737 44.6608,-149.76859 5.89973,-35.27121 2.55054,-41.30077 -4.61748,-49.05549 2.6403,-27.84015 -1.49972,-54.93543 13.10969,-87.18618 -30.24901,11.8257 -37.38229,40.1607 -48.31889,65.50508 -8.00091,-50.93293 0.20916,-71.27319 3.31889,-101.21936 -29.06476,14.77791 -42.86151,47.11402 -45,92.85714 -10.92395,-1.3042 -21.39144,-4.43423 -33.57143,-0.71429 -0.26404,-46.02334 -1.46356,-76.88941 8.91063,-114.20649 -53.25547,21.02686 -62.94728,106.5941 -56.05349,112.77792 -10.88282,0.535 -21.37108,-1.2973 -32.85714,2.85715 0.63892,-42.57135 -0.26046,-84.90861 -30,-122.85715 0,0 -30.95806,80.92234 -31.42857,103.57143 -0.47051,22.64909 9.45159,40.16588 9.45159,40.16588 0,0 -8.56807,36.74051 -6.29859,58.23223 2.29585,21.74146 20.4429,59.67617 27.26542,78.65809 z"
- style="display:inline;opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- inkscape:connector-curvature="0" />
- </clipPath>
- <filter
- inkscape:collect="always"
- x="-0.084654994"
- width="1.16931"
- y="-0.36592469"
- height="1.7318494"
- id="filter11361-3">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="4.5740586"
- id="feGaussianBlur11363-6" />
- </filter>
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient8430"
- id="radialGradient7904-7"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(-0.3324832,0.9022288,-0.9582407,-0.3531242,305.29227,19.909497)"
- cx="142.95833"
- cy="107.09234"
- fx="142.95833"
- fy="107.09234"
- r="66.981766" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3317"
- id="radialGradient7906-6"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(1.0036478,-1.0345492e-7,1.7124628e-7,1.6613125,-160.53487,-96.205369)"
- cx="317.78754"
- cy="129.65378"
- fx="317.78754"
- fy="129.65378"
- r="47.863216" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient8398"
- id="radialGradient7908-0"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(2.0747661,-0.1577957,0.2382425,3.1325183,-550.77432,-65.728909)"
- cx="325.30847"
- cy="80.909554"
- fx="325.30847"
- fy="80.909554"
- r="26.937988" />
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8658-06">
- <path
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#0b0b0b;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 569.03125,1018.7776 c -4.28571,0.7143 -27.62815,3.6181 -57.85714,10 -30.22899,6.3819 -99.77493,25.9619 -142.85715,35.7143 -43.08222,9.7524 -117.26443,34.816 -156.91262,27.2654 -39.64818,-7.5506 -89.51595,-64.4083 -89.51595,-64.4083 l 4.28572,-94.28571 c 0,0 85.88551,-16.20094 112.14285,-33.57143 26.25735,-17.37049 45.58238,-49.66598 59.28572,-71.42857 13.70334,-21.76259 32.85714,-71.42858 32.85714,-71.42858 l 238.57143,262.14289 z"
- id="path8660-2"
- sodipodi:nodetypes="czzzcczzcc"
- inkscape:connector-curvature="0" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter8888-6"
- x="-0.2112188"
- width="1.4224375"
- y="-0.16808605"
- height="1.3361721">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="8.3693583"
- id="feGaussianBlur8890-1" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath2833-2">
- <path
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#292929;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 569.03125,1018.7776 c -4.28571,0.7143 -27.62815,3.6181 -57.85714,10 -30.22899,6.3819 -57.31395,4.9661 -135.78608,17.3296 -79.85178,12.5808 -94.06436,42.5423 -108.12225,47.0643 -14.70014,4.7286 -145.37739,-65.8225 -145.37739,-65.8225 l 4.28572,-94.28571 c 0,0 85.88551,-16.20094 112.14285,-33.57143 26.25735,-17.37049 45.58238,-49.66598 59.28572,-71.42857 13.70334,-21.76259 32.85714,-71.42858 32.85714,-71.42858 l 238.57143,262.14289 z"
- id="path2835-3"
- sodipodi:nodetypes="czzzcczzcc"
- inkscape:connector-curvature="0" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter8892-7"
- x="-0.18692794"
- width="1.3738559"
- y="-0.23646873"
- height="1.4729375">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="31.21228"
- id="feGaussianBlur8894-5" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3665-9">
- <path
- sodipodi:nodetypes="czzcczcc"
- id="path3667-2"
- d="m 366.88839,504.13471 c 0,0 -29.55406,40.57305 -47.85714,74.28571 -18.30309,33.71267 -58.62109,126.35694 -70.35714,171.07143 -11.7594,44.80344 -62.5,123.57144 -62.5,123.57144 l 76.07143,18.21428 c 0,0 11.80712,-12.82335 31.07142,-46.07143 19.2643,-33.24808 60.35715,-138.57143 60.35715,-138.57143 l 13.21428,-202.5 z"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#0f0f0f;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- inkscape:connector-curvature="0" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter8856-2"
- x="-0.3253231"
- width="1.6506462"
- y="-0.19013336"
- height="1.3802667">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="28.712591"
- id="feGaussianBlur8858-8" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8642-9">
- <path
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#0f0f0f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 366.88839,504.13471 c 0,0 -29.55406,40.57305 -47.85714,74.28571 -18.30309,33.71267 -58.62109,126.35694 -70.35714,171.07143 -11.7594,44.80344 -62.5,123.57144 -62.5,123.57144 l 76.07143,18.21428 c 0,0 11.80712,-12.82335 31.07142,-46.07143 19.2643,-33.24808 60.35715,-138.57143 60.35715,-138.57143 l 13.21428,-202.5 z"
- id="path8644-7"
- sodipodi:nodetypes="czzcczcc"
- inkscape:connector-curvature="0" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter8860-3"
- x="-0.38093024"
- width="1.7618605"
- y="-0.17518716"
- height="1.3503743">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="19.304015"
- id="feGaussianBlur8862-6" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath7616-1">
- <path
- id="path7618-2"
- d="m 205.47016,-408.97318 -0.0901,0.002 c -1.44563,0.78566 -6.69921,1.14335 -7.27625,9.03857 -0.54134,7.40553 13.78595,18.09566 15.85433,19.24481 1.66964,0.92764 3.48475,1.65551 5.27345,2.09115 l 1.41867,0.31834 c 1.90027,0.34514 3.70042,0.41015 5.15031,0.26563 3.1486,-0.31384 5.16386,-0.57031 7.16789,-0.8152 2.00402,-0.24488 2.5407,-0.86478 3.64319,-1.02999 1.14342,-0.17143 2.25659,0.27414 6.29577,-0.43753 4.03888,-0.71169 5.51507,-1.03768 6.23419,-1.3503 0.74664,-0.32479 1.81806,-0.74575 2.47589,-1.3621 1.95897,0.12471 3.80476,-0.0261 5.2648,-0.47819 3.02376,-0.93627 4.99157,-1.52544 6.8628,-2.27751 1.50138,-0.60342 2.43202,-1.53636 2.66436,-1.81883 0.23254,-0.28245 0.14951,-0.71989 0.17694,-0.73948 0.0453,-0.0322 0.34622,-0.0701 0.52926,-0.40161 0.98557,-1.78276 2.70955,-5.45215 2.87137,-6.12738 0.16094,-0.67257 0.26182,-1.33778 0.34007,-1.73051 0.0453,-0.22691 -0.0855,-0.88701 -0.0594,-0.94393 0.0365,-0.0797 0.30505,-0.22988 0.37769,-0.47485 0.34913,-1.17686 0.24274,-2.19578 0.1278,-3.6249 -0.11463,-1.42909 -0.64781,-4.6711 -1.24013,-5.56865 -0.38017,-0.57646 -0.74215,-0.84625 -1.09026,-0.98459 -0.0657,-0.0219 -0.12035,-0.0553 -0.1827,-0.0754 -0.0207,-0.005 -0.0418,2.3e-4 -0.0623,-0.004 -0.30559,-0.097 -0.59597,-0.20067 -1.13816,-0.29875 -0.97557,-0.1765 -2.40074,-0.42766 -3.94175,-0.52584 -0.51366,-0.0327 -1.0379,-0.0247 -1.56523,-0.0153 -3.57201,0.0636 -9.05695,0.3611 -10.30707,0.90928 -1.60587,-0.44697 -3.89597,-0.88576 -5.89053,-0.8812 -3.07195,0.007 -4.97947,-0.005 -6.92207,-0.0134 -1.94251,-0.009 -1.70908,0.27025 -2.9318,0.26518 -1.32192,-0.005 -1.76701,-0.34717 -5.55562,-0.29393 -3.55782,0.05 -9.02796,0.36522 -10.30706,0.90927 -1.60614,-0.44747 -3.89367,-0.88575 -5.89043,-0.88118 -3.07215,0.007 -4.98175,0.0265 -6.92426,0.0177 -0.66059,-0.003 -1.0485,0.051 -1.35359,0.0934 z"
- style="display:inline;opacity:0.82448976;fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- inkscape:connector-curvature="0" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter7610-9"
- x="-0.021942979"
- width="1.0438859"
- y="-0.10017137"
- height="1.2003427">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.57530213"
- id="feGaussianBlur7612-3" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath7606-1">
- <path
- id="path7608-9"
- d="m 1049.205,-282.26672 -0.09,0.008 c -1.3874,0.88445 -6.6033,1.6072 -6.629,9.52344 -0.024,7.42525 15.0129,17.09146 17.1563,18.09375 1.7302,0.80909 3.5916,1.40876 5.4063,1.71875 l 1.4374,0.21875 c 1.9197,0.21194 3.72,0.15141 5.1563,-0.0937 3.1191,-0.5324 5.1116,-0.92861 7.0937,-1.3125 1.9821,-0.38387 2.4743,-1.03965 3.5626,-1.28125 1.1287,-0.25066 2.2702,0.11629 6.25,-0.875 3.9795,-0.99128 5.4294,-1.4193 6.125,-1.78125 0.7222,-0.37601 1.7617,-0.87058 2.375,-1.53125 1.9629,-0.012 3.7937,-0.29105 5.2187,-0.84375 2.9512,-1.14461 4.8732,-1.86942 6.6875,-2.75 1.4557,-0.70653 2.3191,-1.70203 2.5312,-2 0.2123,-0.29796 0.099,-0.72855 0.125,-0.75 0.043,-0.0352 0.3405,-0.094 0.5,-0.4375 0.859,-1.84708 2.3232,-5.62764 2.4376,-6.3125 0.1137,-0.68215 0.168,-1.35277 0.2187,-1.75 0.029,-0.22951 -0.1471,-0.8789 -0.125,-0.9375 0.031,-0.082 0.2883,-0.25057 0.3437,-0.5 0.2663,-1.19832 0.089,-2.20736 -0.125,-3.625 -0.2139,-1.41764 -0.9716,-4.61463 -1.625,-5.46875 -0.4194,-0.54857 -0.7993,-0.7925 -1.1562,-0.90625 -0.067,-0.0173 -0.1239,-0.0467 -0.1875,-0.0625 -0.021,-0.004 -0.042,0.003 -0.062,0 -0.3116,-0.0755 -0.6085,-0.15867 -1.1562,-0.21875 -0.9855,-0.10812 -2.4247,-0.2594 -3.9688,-0.25 -0.5147,0.003 -1.0371,0.0476 -1.5625,0.0937 -3.5589,0.31228 -9.0098,0.99108 -10.2187,1.625 -1.6331,-0.33402 -3.9482,-0.61223 -5.9376,-0.46875 -3.064,0.22097 -4.9677,0.34219 -6.9062,0.46875 -1.9384,0.12655 -1.6861,0.38864 -2.9062,0.46875 -1.3191,0.0866 -1.7869,-0.22325 -5.5626,0.0937 -3.5457,0.29772 -8.9806,0.99317 -10.2187,1.625 -1.6334,-0.33451 -3.9459,-0.61239 -5.9375,-0.46875 -3.0642,0.22098 -4.9678,0.37344 -6.9062,0.5 -0.6592,0.043 -1.0424,0.12393 -1.3438,0.1875 z"
- style="display:inline;opacity:0.82448976;fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- inkscape:connector-curvature="0" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter7578-4"
- x="-0.08160872"
- width="1.1632174"
- y="-0.22659944"
- height="1.4531989">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="2.437399"
- id="feGaussianBlur7580-7" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7594-8"
- x="-0.040804356"
- width="1.0816087"
- y="-0.11329972"
- height="1.2265995">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.2186995"
- id="feGaussianBlur7596-4" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8616-5">
- <path
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 352.24553,211.99185 c -3.80443,-25.26423 -16.80972,-50.63802 -17.1568,-75.52523 -0.18626,-13.35552 3.27285,-26.57091 13.75553,-39.554046 36.34702,-65.295835 116.94091,-84.694685 185.93466,-91.465427 86.92239,-11.016801 184.91267,17.940072 233.37134,95.401283 54.12402,75.7333 56.67476,172.53912 80.61204,259.52795 29.43779,127.1276 54.77914,256.21414 60.39224,386.85035 -3.06348,78.18185 -8.42634,165.18415 -60.50321,228.13413 -48.02654,50.35744 -122.78647,50.05304 -187.06988,59.00234 -90.55539,4.655 -184.35153,-16.1458 -261.7839,-64.19824 -64.77564,-37.94001 -95.73019,-113.47863 -97.2794,-186.01958 -8.38917,-79.87516 26.39152,-153.80851 51.6204,-227.15961 7.47061,-82.76107 9.41286,-166.24775 9.65334,-249.38484 -0.83682,-32.19544 -7.08953,-63.81733 -11.54636,-95.60908 z"
- id="path8618-0"
- sodipodi:nodetypes="cscccccccccccc"
- inkscape:connector-curvature="0" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter8940-3"
- x="-0.25152978"
- width="1.5030596"
- y="-0.053035267"
- height="1.1060705">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="13.024603"
- id="feGaussianBlur8942-6" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8209-6">
- <path
- sodipodi:nodetypes="czcc"
- id="path8211-3"
- d="m 734.03125,519.49186 c 0,0 16.75513,37.01806 28.70141,53.95395 11.94629,16.93589 52.72716,56.04605 52.72716,56.04605 l 0.59717,-138.58975"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#1a1a1a;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- inkscape:connector-curvature="0" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter8822-2"
- x="-0.2742857"
- width="1.5485713"
- y="-0.21333334"
- height="1.4266667">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="11.313708"
- id="feGaussianBlur8824-0" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3998-6">
- <path
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 178.21428,274.14789 c -3.80443,-25.26423 -16.80972,-50.63802 -17.1568,-75.52523 -0.18626,-13.35552 3.27285,-26.57091 13.75553,-39.55405 36.34702,-65.295835 116.94091,-84.694685 185.93466,-91.465427 86.92239,-11.016801 184.91267,17.940072 233.37134,95.401287 54.12402,75.7333 56.67476,172.53912 80.61204,259.52795 29.43779,127.1276 54.77914,256.21414 60.39224,386.85035 -3.06348,78.18185 -8.42634,165.18415 -60.50321,228.13413 -48.02654,50.3574 -122.78647,50.053 -187.06988,59.0023 -90.55539,4.655 -184.35153,-16.1458 -261.7839,-64.1982 -64.77564,-37.94001 -95.73019,-113.47863 -97.2794,-186.01958 -8.38917,-79.87516 26.39152,-153.80851 51.6204,-227.15961 7.47061,-82.76107 9.41286,-166.24775 9.65334,-249.38484 -0.83682,-32.19544 -7.08953,-63.81733 -11.54636,-95.60908 z"
- id="path4000-1"
- sodipodi:nodetypes="cscccccccccccc"
- inkscape:connector-curvature="0" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter3677-5">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="2.0397518"
- id="feGaussianBlur3679-5" />
- </filter>
- <filter
- id="filter3785-4"
- inkscape:label="White Fur">
- <feTurbulence
- id="feTurbulence3787-7"
- type="fractalNoise"
- baseFrequency="0.24044943820224721"
- numOctaves="10"
- seed="655"
- result="result0" />
- <feDisplacementMap
- id="feDisplacementMap3789-65"
- in="SourceGraphic"
- in2="result0"
- scale="62"
- xChannelSelector="B"
- yChannelSelector="G" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8604-69">
- <path
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 352.24553,211.99185 c -3.80443,-25.26423 -16.80972,-50.63802 -17.1568,-75.52523 -0.18626,-13.35552 3.27285,-26.57091 13.75553,-39.554046 36.34702,-65.295835 116.94091,-84.694685 185.93466,-91.465427 86.92239,-11.016801 184.91267,17.940072 233.37134,95.401283 54.12402,75.7333 56.67476,172.53912 80.61204,259.52795 29.43779,127.1276 54.77914,256.21414 60.39224,386.85035 -3.06348,78.18185 -8.42634,165.18415 -60.50321,228.13413 -48.02654,50.35744 -122.78647,50.05304 -187.06988,59.00234 -90.55539,4.655 -184.35153,-16.1458 -261.7839,-64.19824 -64.77564,-37.94001 -95.73019,-113.47863 -97.2794,-186.01958 -8.38917,-79.87516 26.39152,-153.80851 51.6204,-227.15961 7.47061,-82.76107 9.41286,-166.24775 9.65334,-249.38484 -0.83682,-32.19544 -7.08953,-63.81733 -11.54636,-95.60908 z"
- id="path8606-3"
- sodipodi:nodetypes="cscccccccccccc"
- inkscape:connector-curvature="0" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter8802-7"
- x="-0.35311759"
- width="1.7062352"
- y="-0.1817714"
- height="1.3635428">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="48.038491"
- id="feGaussianBlur8804-4" />
- </filter>
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3317"
- id="radialGradient3315-5"
- cx="543.6698"
- cy="147.3131"
- fx="543.6698"
- fy="147.3131"
- r="47.863216"
- gradientTransform="matrix(2.1382256,0,0,2.3382884,-77.03847,-101.68704)"
- gradientUnits="userSpaceOnUse" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3537"
- id="radialGradient3543-4"
- cx="385"
- cy="237.00504"
- fx="385"
- fy="237.00504"
- r="86.928574"
- gradientTransform="matrix(1,0,0,0.8562038,0,34.080427)"
- gradientUnits="userSpaceOnUse" />
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath4100-3">
- <path
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.9000755px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
- d="m 265.93541,126.68393 -18.76721,168.86308 174.10543,-73.12068 61.9544,88.65883 57.8844,-31.9903 -37.53442,-180.059677 -237.6426,27.648747 z"
- id="path4102-0"
- sodipodi:nodetypes="ccccccc"
- inkscape:connector-curvature="0" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter4120-7"
- x="-0.2770822"
- width="1.5541644"
- y="-0.32482043"
- height="1.6496409">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="19.956289"
- id="feGaussianBlur4122-8" />
- </filter>
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3961"
- id="radialGradient3915-6"
- cx="418.30365"
- cy="342.47794"
- fx="418.30365"
- fy="342.47794"
- r="131.4509"
- gradientTransform="matrix(1.3957347,0.6211056,-0.4244067,0.9537174,-15.061913,-227.96711)"
- gradientUnits="userSpaceOnUse" />
- <mask
- maskUnits="userSpaceOnUse"
- id="mask3684-3">
- <ellipse
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:url(#linearGradient3688);fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.43724918px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- id="path3686-1"
- transform="translate(-174.03125,62.156036)"
- cx="579.474"
- cy="260.57516"
- rx="192.6866"
- ry="164.04877" />
- </mask>
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3951"
- id="radialGradient3933-8"
- cx="397.16388"
- cy="336.95245"
- fx="397.16388"
- fy="336.95245"
- r="36.75"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(1.9449972,2.4894837e-7,-2.4894833e-7,1.9449969,-375.31868,-318.41912)" />
- <filter
- inkscape:collect="always"
- id="filter8806-6"
- x="-0.61142862"
- width="2.2228572"
- y="-0.14930232"
- height="1.2986046">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="37.830213"
- id="feGaussianBlur8808-4" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8826-9"
- x="-0.25894088"
- width="1.5178818"
- y="-0.2236412"
- height="1.4472824">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="19.631544"
- id="feGaussianBlur8828-5" />
- </filter>
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3985"
- id="radialGradient3991-0"
- cx="402.48898"
- cy="317.23578"
- fx="402.48898"
- fy="317.23578"
- r="23.714285"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(4.3776616,0,0,4.3776616,-1358.3025,-1070.7357)" />
- <filter
- inkscape:collect="always"
- id="filter3981-7"
- x="-0.30000001"
- width="1.6"
- y="-0.30000001"
- height="1.6">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="2"
- id="feGaussianBlur3983-1" />
- </filter>
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4106"
- id="radialGradient4112-7"
- cx="250.22678"
- cy="475.09763"
- fx="250.22678"
- fy="475.09763"
- r="95.98877"
- gradientTransform="matrix(1.2259004,-0.7077739,0.1413989,0.2449102,322.22326,608.91815)"
- gradientUnits="userSpaceOnUse" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4013"
- id="radialGradient3585-2"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(1.1323239,0.7659488,-1.4550286,2.1510098,588.75376,-711.79716)"
- cx="228.81355"
- cy="440.26971"
- fx="228.81355"
- fy="440.26971"
- r="119.17509" />
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3999-0">
- <path
- style="display:inline;opacity:1;fill:#f5ff04;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
- d="m 179.64286,267.36218 c -22.41044,39.70292 -60.6161,115.78029 -69.28571,149.64286 -8.64721,33.7751 -8.77199,66.41654 -0.35715,86.42858 8.3602,19.88213 26.16398,35.6328 40.71428,41.42856 -0.59638,-14.37587 14.37295,-43.28583 72.85715,-72.5 58.62627,-29.28514 78.38163,-27.13086 103.57142,-47.14286 25.63006,-20.36176 12.61031,-67.04463 3.21429,-93.92857 -9.43424,-26.99328 -34.96741,-59.12448 -66.42857,-69.64285 -31.03327,-10.37532 -65.01776,-4.84837 -84.28571,5.71428 z"
- id="path4001-61"
- sodipodi:nodetypes="czzczzzzc"
- inkscape:connector-curvature="0" />
- </clipPath>
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4041"
- id="radialGradient4060-5"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(0.05911206,2.6869855,-0.7234268,0.01591495,408.72779,-424.56452)"
- cx="275.4422"
- cy="335.34866"
- fx="275.4422"
- fy="335.34866"
- r="36.75" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient7622"
- id="radialGradient4062-9"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(0.05911206,2.6869855,-0.7234268,0.01591495,408.72779,-424.56452)"
- cx="275.4422"
- cy="335.34866"
- fx="275.4422"
- fy="335.34866"
- r="36.75" />
- <filter
- inkscape:collect="always"
- id="filter4079-1">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="6.5887624"
- id="feGaussianBlur4081-1" />
- </filter>
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4013"
- id="radialGradient4056-5"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(1.1323239,0.7659488,-1.4550286,2.1510098,588.75376,-711.79716)"
- cx="228.81355"
- cy="440.26971"
- fx="228.81355"
- fy="440.26971"
- r="119.17509" />
- <filter
- inkscape:collect="always"
- id="filter4083-9">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.5052066"
- id="feGaussianBlur4085-7" />
- </filter>
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4113"
- id="radialGradient4119-7"
- cx="296.33783"
- cy="427.17749"
- fx="296.33783"
- fy="427.17749"
- r="19.704132"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(2.9797125,0,0,2.9797125,-599.28727,-827.0855)" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4862"
- id="radialGradient4868-3"
- cx="429.56738"
- cy="377.42877"
- fx="429.56738"
- fy="377.42877"
- r="72.079735"
- gradientTransform="matrix(1,0,0,0.618034,0,144.16496)"
- gradientUnits="userSpaceOnUse" />
- <filter
- inkscape:collect="always"
- id="filter4002-6"
- x="-0.24334238"
- width="1.4866848"
- y="-0.39104807"
- height="1.7820961">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="14.589518"
- id="feGaussianBlur4004-3" />
- </filter>
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4870"
- id="radialGradient4876-9"
- cx="437.6991"
- cy="391.21735"
- fx="437.6991"
- fy="391.21735"
- r="36.611931"
- gradientTransform="matrix(1,0,0,0.618034,0,149.43174)"
- gradientUnits="userSpaceOnUse" />
- <filter
- inkscape:collect="always"
- id="filter4010-1"
- x="-0.14577261"
- width="1.2915452"
- y="-0.23523259"
- height="1.4704652">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="4.4442907"
- id="feGaussianBlur4012-2" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter4053-9">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.6062947"
- id="feGaussianBlur4055-3" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8514-8">
- <path
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 352.24553,211.99185 c -3.80443,-25.26423 -16.80972,-50.63802 -17.1568,-75.52523 -0.18626,-13.35552 3.27285,-26.57091 13.75553,-39.554046 36.34702,-65.295835 116.94091,-84.694685 185.93466,-91.465427 86.92239,-11.016801 184.91267,17.940072 233.37134,95.401283 54.12402,75.7333 56.67476,172.53912 80.61204,259.52795 29.43779,127.1276 54.77914,256.21414 60.39224,386.85035 -3.06348,78.18185 -8.42634,165.18415 -60.50321,228.13413 -48.02654,50.35744 -122.78647,50.05304 -187.06988,59.00234 -90.55539,4.655 -184.35153,-16.1458 -261.7839,-64.19824 -64.77564,-37.94001 -95.73019,-113.47863 -97.2794,-186.01958 -8.38917,-79.87516 26.39152,-153.80851 51.6204,-227.15961 7.47061,-82.76107 9.41286,-166.24775 9.65334,-249.38484 -0.83682,-32.19544 -7.08953,-63.81733 -11.54636,-95.60908 z"
- id="path8516-8"
- sodipodi:nodetypes="cscccccccccccc"
- inkscape:connector-curvature="0" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter8814-5"
- x="-0.20466694"
- width="1.4093339"
- y="-0.29007819"
- height="1.5801564">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="22.300169"
- id="feGaussianBlur8816-0" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8610-9">
- <path
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 352.24553,211.99185 c -3.80443,-25.26423 -16.80972,-50.63802 -17.1568,-75.52523 -0.18626,-13.35552 3.27285,-26.57091 13.75553,-39.554046 36.34702,-65.295835 116.94091,-84.694685 185.93466,-91.465427 86.92239,-11.016801 184.91267,17.940072 233.37134,95.401283 54.12402,75.7333 56.67476,172.53912 80.61204,259.52795 29.43779,127.1276 54.77914,256.21414 60.39224,386.85035 -3.06348,78.18185 -8.42634,165.18415 -60.50321,228.13413 -48.02654,50.35744 -122.78647,50.05304 -187.06988,59.00234 -90.55539,4.655 -184.35153,-16.1458 -261.7839,-64.19824 -64.77564,-37.94001 -95.73019,-113.47863 -97.2794,-186.01958 -8.38917,-79.87516 26.39152,-153.80851 51.6204,-227.15961 7.47061,-82.76107 9.41286,-166.24775 9.65334,-249.38484 -0.83682,-32.19544 -7.08953,-63.81733 -11.54636,-95.60908 z"
- id="path8612-6"
- sodipodi:nodetypes="cscccccccccccc"
- inkscape:connector-curvature="0" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter8810-3"
- x="-0.23519406"
- width="1.4703881"
- y="-0.24500646"
- height="1.4900129">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="58.328041"
- id="feGaussianBlur8812-8" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8622-5">
- <path
- style="display:inline;opacity:1;fill:#202020;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 821.64329,477.88997 c 0,0 22.61947,-6.50681 35.74275,-5.87273 13.12328,0.63409 30.64158,1.93862 43.70885,12.18619 13.06727,10.24756 25.06774,27.14007 34.11239,58.36965 9.04465,31.22958 1.69832,99.25201 -6.17603,143.34735 -7.87435,44.09534 -28.2651,106.11298 -45,140 -16.7349,33.88702 -49.79771,77.4952 -60.56943,89.87616 -11.36422,13.06197 -56.20589,36.42617 -79.43057,42.26667 5.3033,-10.6066 48.89976,-50.58884 35,-60.71426 -14.01897,-10.21226 -45.76009,45.98236 -84.29315,29.03317 21.38231,-13.13212 41.7794,-51.18606 34.04061,-66.59445 -7.84025,-15.61039 -30.70493,48.75757 -93.53554,37.01288 30.05204,-27.52666 55.40706,-70.90401 41.2627,-82.9797 -14.41516,-12.30687 -60.46175,54.29315 -60.46175,54.29315 0,0 -2.8219,-41.70118 13.7732,-68.60732 16.63935,-26.97787 79.65297,-81.61527 99.55313,-111.70342 19.90015,-30.08814 33.61256,-66.00902 42.13542,-92.51794 8.52286,-26.50892 15.80094,-77.09954 15.80094,-77.09954"
- id="path8624-61"
- sodipodi:nodetypes="czzzzzzczczczczzzc"
- inkscape:connector-curvature="0" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter8818-1"
- x="-0.34381232"
- width="1.6876246"
- y="-0.18433961"
- height="1.3686792">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="34.542167"
- id="feGaussianBlur8820-5" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8906-9">
- <path
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 352.24553,211.99185 c -3.80443,-25.26423 -16.80972,-50.63802 -17.1568,-75.52523 -0.18626,-13.35552 3.27285,-26.57091 13.75553,-39.554046 36.34702,-65.295835 116.94091,-84.694685 185.93466,-91.465427 86.92239,-11.016801 184.91267,17.940072 233.37134,95.401283 54.12402,75.7333 56.67476,172.53912 80.61204,259.52795 29.43779,127.1276 54.77914,256.21414 60.39224,386.85035 -3.06348,78.18185 -8.42634,165.18415 -60.50321,228.13413 -48.02654,50.35744 -122.78647,50.05304 -187.06988,59.00234 -90.55539,4.655 -184.35153,-16.1458 -261.7839,-64.19824 -64.77564,-37.94001 -95.73019,-113.47863 -97.2794,-186.01958 -8.38917,-79.87516 26.39152,-153.80851 51.6204,-227.15961 7.47061,-82.76107 9.41286,-166.24775 9.65334,-249.38484 -0.83682,-32.19544 -7.08953,-63.81733 -11.54636,-95.60908 z"
- id="path8908-8"
- sodipodi:nodetypes="cscccccccccccc"
- inkscape:connector-curvature="0" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3602-4">
- <path
- sodipodi:nodetypes="czzzzzzczczczczzzc"
- id="path3604-8"
- d="m 647.61204,540.04601 c 0,0 22.61947,-6.50681 35.74275,-5.87273 13.12328,0.63409 30.64158,1.93862 43.70885,12.18619 13.06727,10.24756 25.06774,27.14007 34.11239,58.36965 9.04465,31.22958 1.69832,99.25201 -6.17603,143.34735 -7.87435,44.09534 -28.2651,106.11298 -45,140 -16.7349,33.88702 -49.79771,77.4952 -60.56943,89.87616 -11.36422,13.06197 -56.20589,36.42617 -79.43057,42.26667 5.3033,-10.6066 48.89976,-50.58884 35,-60.71426 -14.01897,-10.21226 -45.76009,45.98236 -84.29315,29.03317 21.38231,-13.13212 41.7794,-51.18606 34.04061,-66.59445 -7.84025,-15.61039 -30.70493,48.75757 -93.53554,37.01288 30.05204,-27.52666 55.40706,-70.90401 41.2627,-82.9797 -14.41516,-12.30687 -60.46175,54.29315 -60.46175,54.29315 0,0 -2.8219,-41.70118 13.7732,-68.60732 16.63935,-26.97787 79.65297,-81.61527 99.55313,-111.70342 19.90015,-30.08814 33.61256,-66.00902 42.13542,-92.51794 8.52286,-26.50892 15.80094,-77.09954 15.80094,-77.09954"
- style="display:inline;opacity:1;fill:#202020;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- inkscape:connector-curvature="0" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter3587-1"
- x="-0.1">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="8.881432"
- id="feGaussianBlur3589-0" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3992-4">
- <path
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 709.28572,844.50504 c 54.28571,-1.42857 126.035,-15.05199 170,-26.78572 44.05271,-11.75714 125.88628,-36.34724 175.35708,-57.85714 49.3393,-21.45272 113.6037,-59.2816 154.2858,-92.14285 40.5081,-32.72069 52.3899,-55.81981 60.7143,-33.57143 8.3691,22.36779 -16.407,56.32562 -37.8572,81.07143 -21.6041,24.9234 -52.7313,52.70533 -98.9286,89.28571 C 1086.6598,841.08542 976.77458,906.08967 920,933.07647 c -57.06606,27.12536 -128.20334,58.23842 -172.14286,72.50003 -43.93952,14.2616 -131.42857,31.0714 -131.42857,31.0714 l 92.85715,-192.14286 z"
- id="path3994-4"
- sodipodi:nodetypes="czzzzzzzzcc"
- inkscape:connector-curvature="0" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter3779-4"
- x="-0.087980822"
- width="1.1759616"
- y="-0.17728332"
- height="1.3545666">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="16.340344"
- id="feGaussianBlur3781-4" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3986-7">
- <path
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 709.28572,844.50504 c 54.28571,-1.42857 126.035,-15.05199 170,-26.78572 44.05271,-11.75714 125.88628,-36.34724 175.35708,-57.85714 49.3393,-21.45272 113.6037,-59.2816 154.2858,-92.14285 40.5081,-32.72069 52.3899,-55.81981 60.7143,-33.57143 8.3691,22.36779 -16.407,56.32562 -37.8572,81.07143 -21.6041,24.9234 -52.7313,52.70533 -98.9286,89.28571 C 1086.6598,841.08542 976.77458,906.08967 920,933.07647 c -57.06606,27.12536 -128.20334,58.23842 -172.14286,72.50003 -43.93952,14.2616 -131.42857,31.0714 -131.42857,31.0714 l 92.85715,-192.14286 z"
- id="path3988-6"
- sodipodi:nodetypes="czzzzzzzzcc"
- inkscape:connector-curvature="0" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3722-3">
- <path
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 709.28572,844.50504 c 54.28571,-1.42857 126.035,-15.05199 170,-26.78572 44.05271,-11.75714 125.88628,-36.34724 175.35708,-57.85714 49.3393,-21.45272 113.6037,-59.2816 154.2858,-92.14285 40.5081,-32.72069 52.3899,-55.81981 60.7143,-33.57143 8.3691,22.36779 -16.407,56.32562 -37.8572,81.07143 -21.6041,24.9234 -52.7313,52.70533 -98.9286,89.28571 C 1086.6598,841.08542 976.77458,906.08967 920,933.07647 c -57.06606,27.12536 -128.20334,58.23842 -172.14286,72.50003 -43.93952,14.2616 -131.42857,31.0714 -131.42857,31.0714 l 92.85715,-192.14286 z"
- id="path3724-1"
- sodipodi:nodetypes="czzzzzzzzcc"
- inkscape:connector-curvature="0" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter8225-7">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="10.661912"
- id="feGaussianBlur8227-5" />
- </filter>
- <mask
- maskUnits="userSpaceOnUse"
- id="mask7704-9">
- <path
- style="fill:url(#linearGradient7708);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
- d="m 718.40812,-224.31217 33.25,56 275.99998,-24 159.5,-48.25 -66.5,-82.75 -402.24998,99 z"
- id="path7706-6"
- inkscape:connector-curvature="0" />
- </mask>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath7421-7">
- <path
- sodipodi:type="inkscape:offset"
- inkscape:radius="0"
- inkscape:original="M 1111.4062 -285.9375 L 1107.4688 -284.0625 C 1107.4283 -284.05228 1107.3692 -284.04201 1107.3438 -284.03125 C 1106.925 -283.8184 1107.1791 -283.93067 1106.6875 -283.71875 C 1106.2014 -283.50919 1104.9499 -283.13456 1102.5938 -282.25 C 1099.2626 -280.99942 1096.7895 -280.10016 1095.5938 -279.1875 C 1094.0576 -279.16623 1091.8733 -278.95419 1089.9375 -278.46875 C 1086.956 -277.72108 1085.0823 -277.29474 1083.1875 -276.875 C 1081.2927 -276.45527 1081.512 -276.23281 1080.3125 -276 C 1079.0159 -275.74833 1078.5911 -276.00899 1074.875 -275.21875 C 1071.3851 -274.4766 1065.9802 -273.28768 1064.7188 -272.53125 C 1063.1348 -272.71203 1060.8513 -272.85303 1058.875 -272.5625 C 1055.8346 -272.11554 1053.9588 -271.88974 1052.0312 -271.65625 C 1051.3758 -271.57687 1050.9902 -271.45547 1050.6875 -271.375 C 1050.2613 -271.24334 1050.0017 -271.11498 1049.3125 -271.03125 C 1048.0009 -270.87188 1047.5503 -271.18808 1043.7812 -270.75 C 1040.2273 -270.33691 1034.7758 -269.47718 1033.5312 -268.8125 C 1031.9322 -269.10979 1029.6735 -269.34669 1027.6875 -269.15625 C 1024.6287 -268.86293 1022.7155 -268.67226 1020.7812 -268.5 C 1018.847 -268.32773 1019.0926 -268.07763 1017.875 -267.96875 C 1016.5588 -267.85105 1016.1152 -268.13238 1012.3438 -267.71875 C 1008.8017 -267.3303 1003.3359 -266.50948 1002.0625 -265.84375 C 1000.4636 -266.13844 998.1753 -266.35076 996.1875 -266.15625 C 993.12921 -265.857 991.2463 -265.67601 989.3125 -265.5 C 988.65501 -265.44015 988.27245 -265.32144 987.96875 -265.25 C 987.54105 -265.13104 987.28525 -265.03193 986.59375 -264.96875 C 985.27775 -264.84849 984.834 -265.16363 981.0625 -264.75 C 977.50631 -264.35998 972.0569 -263.51084 970.8125 -262.84375 C 969.21381 -263.13793 966.95265 -263.36747 964.96875 -263.15625 C 961.91305 -262.83092 959.9947 -262.63001 958.0625 -262.4375 C 956.13031 -262.24499 956.37275 -261.99662 955.15625 -261.875 C 953.84137 -261.74353 953.3932 -262.03954 949.625 -261.59375 C 946.08611 -261.17509 940.6473 -260.30158 939.375 -259.625 C 937.77741 -259.90604 935.51505 -260.04543 933.53125 -259.8125 C 930.47927 -259.45413 928.58625 -259.24464 926.65625 -259.03125 C 926.00007 -258.95869 925.6156 -258.85856 925.3125 -258.78125 C 924.88571 -258.65402 924.6276 -258.51405 923.9375 -258.4375 C 922.62411 -258.29181 922.17015 -258.61152 918.40625 -258.125 C 914.85737 -257.66624 909.4276 -256.70598 908.1875 -256 C 906.59441 -256.24424 904.3537 -256.38135 902.375 -256.125 C 899.32741 -255.73018 897.4243 -255.47655 895.5 -255.21875 C 893.57571 -254.96096 893.7739 -254.72522 892.5625 -254.5625 C 891.25301 -254.3866 890.8153 -254.66688 887.0625 -254.09375 C 883.53821 -253.55551 878.1393 -252.39458 876.875 -251.65625 C 875.28751 -251.85979 873.0295 -251.91098 871.0625 -251.5625 C 868.03631 -251.02638 866.1636 -250.70081 864.25 -250.375 C 863.59941 -250.26423 863.2363 -250.10406 862.9375 -250 C 862.51681 -249.83512 862.27405 -249.6687 861.59375 -249.53125 C 860.29905 -249.26966 859.86665 -249.53745 856.15625 -248.71875 C 852.65777 -247.9468 847.31035 -246.33582 846.09375 -245.5 C 844.53085 -245.57745 842.33625 -245.41472 840.40625 -244.90625 C 837.43387 -244.12312 835.58855 -243.67416 833.71875 -243.15625 C 831.84875 -242.63835 832.0521 -242.38897 830.875 -242.0625 C 829.60251 -241.7096 829.17795 -241.95541 825.53125 -240.875 C 822.10657 -239.86037 816.88185 -237.94183 815.65625 -237.03125 C 814.11747 -237.01851 811.93645 -236.75903 810.03125 -236.15625 C 807.10027 -235.22891 805.2809 -234.69783 803.4375 -234.09375 C 802.81071 -233.88837 802.44585 -233.70117 802.15625 -233.5625 C 801.74867 -233.34889 801.50295 -233.15375 800.84375 -232.9375 C 799.58925 -232.52596 799.1576 -232.74846 795.5625 -231.5 C 792.17261 -230.32283 786.96755 -228.2863 785.78125 -227.34375 C 784.25737 -227.28408 782.1312 -226.94888 780.25 -226.28125 C 777.35261 -225.25296 775.55095 -224.60577 773.71875 -223.96875 C 771.88655 -223.33174 772.0909 -223.12021 770.9375 -222.71875 C 769.69071 -222.28479 769.27395 -222.51903 765.71875 -221.15625 C 762.38005 -219.87645 757.23165 -217.6737 756.03125 -216.6875 C 754.52407 -216.57981 752.39555 -216.1887 750.53125 -215.46875 C 747.66307 -214.36115 745.90735 -213.68719 744.09375 -213 C 743.47705 -212.76637 743.0973 -212.55797 742.8125 -212.40625 C 742.81251 -212.40625 742.8125 -212.37673 742.8125 -212.375 L 734.8125 -209.1875 L 736.625 -194.46875 C 736.36701 -194.52956 742.8125 -191.15625 742.8125 -191.15625 C 743.03891 -191.30093 743.26145 -191.42886 743.53125 -191.53125 C 744.61177 -191.94123 745.70285 -191.74702 749.53125 -193.21875 C 753.35977 -194.69049 754.7553 -195.22373 755.4375 -195.625 C 756.11711 -196.02478 757.04925 -196.50437 757.65625 -197.15625 C 759.48317 -197.294 761.22705 -197.64948 762.59375 -198.15625 C 765.56175 -199.25677 767.4691 -199.96244 769.375 -200.625 C 771.28081 -201.28754 771.72915 -202.03987 772.78125 -202.40625 C 773.87287 -202.78636 774.97635 -202.57163 778.84375 -203.9375 C 782.71115 -205.30336 784.1269 -205.76458 784.8125 -206.15625 C 785.51361 -206.55677 786.5133 -207.08923 787.125 -207.75 C 789.09581 -207.80466 790.94195 -208.13463 792.40625 -208.625 C 795.40777 -209.63008 797.3324 -210.24671 799.25 -210.875 C 800.78861 -211.3791 801.42415 -211.92177 802.15625 -212.3125 C 802.38647 -212.44681 802.63215 -212.56623 802.90625 -212.65625 C 804.00457 -213.01673 805.0877 -212.73762 809 -213.96875 C 812.91231 -215.19988 814.366 -215.6417 815.0625 -216 C 815.75641 -216.35697 816.6926 -216.79261 817.3125 -217.40625 C 819.17771 -217.42891 820.94835 -217.67308 822.34375 -218.09375 C 825.37415 -219.00729 827.33615 -219.52385 829.28125 -220.0625 C 831.22637 -220.60114 831.70745 -221.32702 832.78125 -221.625 C 833.89527 -221.93415 835.00125 -221.61761 838.96875 -222.65625 C 842.93625 -223.69488 844.38625 -224.08898 845.09375 -224.40625 C 845.82855 -224.73584 846.90765 -225.15997 847.53125 -225.78125 C 849.52907 -225.66525 851.3887 -225.80134 852.875 -226.15625 C 855.95311 -226.89125 857.9584 -227.25719 859.9375 -227.65625 C 861.52541 -227.97643 862.1818 -228.4468 862.9375 -228.75 C 863.17501 -228.8568 863.4044 -228.94276 863.6875 -229 C 864.82091 -229.22919 865.99215 -228.79107 870.03125 -229.5 C 874.07067 -230.20893 875.5315 -230.42709 876.25 -230.6875 C 876.96581 -230.94694 877.95435 -231.25474 878.59375 -231.78125 C 880.51795 -231.54176 882.34165 -231.55672 883.78125 -231.78125 C 886.90767 -232.26887 888.9358 -232.48192 890.9375 -232.75 C 892.93921 -233.01807 893.42625 -233.69514 894.53125 -233.84375 C 895.67767 -233.99793 896.8071 -233.54218 900.875 -234.0625 C 904.94281 -234.58282 906.43525 -234.75823 907.15625 -235 C 907.89337 -235.24714 908.95435 -235.58623 909.59375 -236.125 C 911.64375 -235.78947 913.56745 -235.72704 915.09375 -235.90625 C 918.23595 -236.27521 920.27375 -236.46561 922.28125 -236.6875 C 923.89207 -236.86552 924.5459 -237.2957 925.3125 -237.53125 C 925.55341 -237.61677 925.80655 -237.68685 926.09375 -237.71875 C 927.24345 -237.84647 928.39505 -237.3721 932.46875 -237.84375 C 936.54245 -238.3154 938.0278 -238.45435 938.75 -238.6875 C 939.46941 -238.91977 940.45025 -239.16096 941.09375 -239.65625 C 943.03005 -239.32279 944.8638 -239.25201 946.3125 -239.40625 C 949.45851 -239.7412 951.49 -239.92484 953.5 -240.125 C 955.50991 -240.32514 955.98415 -240.95139 957.09375 -241.0625 C 958.24485 -241.17778 959.39025 -240.69744 963.46875 -241.125 C 967.54725 -241.55256 969.05765 -241.68709 969.78125 -241.90625 C 970.52047 -242.13011 971.57685 -242.4195 972.21875 -242.9375 C 974.27575 -242.53883 976.2206 -242.4441 977.75 -242.59375 C 980.89871 -242.90185 982.9258 -243.067 984.9375 -243.25 C 986.55151 -243.39682 987.20055 -243.81055 987.96875 -244.03125 C 988.21005 -244.11211 988.4623 -244.16116 988.75 -244.1875 C 989.90211 -244.29295 991.0429 -243.79475 995.125 -244.1875 C 999.20711 -244.58025 1000.7139 -244.71834 1001.4375 -244.9375 C 1002.1584 -245.15583 1003.1371 -245.3852 1003.7812 -245.875 C 1005.7193 -245.52501 1007.5501 -245.42062 1009 -245.5625 C 1012.1487 -245.8706 1014.1758 -246.03575 1016.1875 -246.21875 C 1018.1991 -246.40174 1018.7017 -247.05677 1019.8125 -247.15625 C 1020.9648 -247.25948 1022.1047 -246.77142 1026.1875 -247.15625 C 1030.2704 -247.54107 1031.7762 -247.65725 1032.5 -247.875 C 1033.2393 -248.09743 1034.2956 -248.38949 1034.9375 -248.90625 C 1036.9949 -248.50448 1038.9404 -248.40292 1040.4688 -248.5625 C 1043.6153 -248.89102 1045.6458 -249.0852 1047.6562 -249.28125 C 1049.2692 -249.43854 1049.9219 -249.91273 1050.6875 -250.15625 C 1050.9282 -250.24429 1051.1507 -250.27762 1051.4375 -250.3125 C 1052.5858 -250.4522 1053.7542 -249.97259 1057.8125 -250.5625 C 1061.8708 -251.15242 1063.3743 -251.33964 1064.0938 -251.59375 C 1064.8104 -251.84691 1065.7684 -252.15182 1066.4062 -252.6875 C 1068.3259 -252.47556 1070.1262 -252.53609 1071.5625 -252.78125 C 1074.6816 -253.31365 1076.6741 -253.70986 1078.6562 -254.09375 C 1080.6383 -254.47762 1081.1305 -255.1334 1082.2188 -255.375 C 1083.3475 -255.62566 1084.489 -255.25871 1088.4688 -256.25 C 1092.4483 -257.24127 1093.8983 -257.6693 1094.5938 -258.03125 C 1095.316 -258.40725 1096.3555 -258.90183 1096.9688 -259.5625 C 1098.9317 -259.57454 1100.7625 -259.85355 1102.1875 -260.40625 C 1105.1387 -261.55085 1107.0607 -262.27567 1108.875 -263.15625 C 1110.3307 -263.86277 1111.1941 -264.85828 1111.4062 -265.15625 C 1111.6185 -265.4542 1111.5051 -265.8848 1111.5312 -265.90625 C 1111.5742 -265.94148 1111.8716 -266.00028 1112.0312 -266.34375 C 1112.8902 -268.19082 1114.3544 -271.97139 1114.4688 -272.65625 C 1114.5825 -273.33839 1114.6368 -274.00902 1114.6875 -274.40625 C 1114.7169 -274.63575 1114.5404 -275.28515 1114.5625 -275.34375 C 1114.5934 -275.42579 1114.8508 -275.59432 1114.9062 -275.84375 C 1115.1725 -277.04206 1114.9953 -278.05111 1114.7812 -279.46875 C 1114.5673 -280.88638 1113.8096 -284.08338 1113.1562 -284.9375 C 1112.4973 -285.79922 1111.9314 -285.94801 1111.4062 -285.9375 z "
- style="display:inline;fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- id="path7423-8"
- d="m 1111.4062,-285.9375 -3.9374,1.875 c -0.041,0.0102 -0.1,0.0205 -0.125,0.0312 -0.4188,0.21285 -0.1647,0.10058 -0.6563,0.3125 -0.4861,0.20956 -1.7376,0.58419 -4.0937,1.46875 -3.3312,1.25058 -5.8043,2.14984 -7,3.0625 -1.5362,0.0213 -3.7205,0.23331 -5.6563,0.71875 -2.9815,0.74767 -4.8552,1.17401 -6.75,1.59375 -1.8948,0.41973 -1.6755,0.64219 -2.875,0.875 -1.2966,0.25167 -1.7214,-0.009 -5.4375,0.78125 -3.4899,0.74215 -8.8948,1.93107 -10.1562,2.6875 -1.584,-0.18078 -3.8675,-0.32178 -5.8438,-0.0312 -3.0404,0.44696 -4.9162,0.67276 -6.8438,0.90625 -0.6554,0.0794 -1.041,0.20078 -1.3437,0.28125 -0.4262,0.13166 -0.6858,0.26002 -1.375,0.34375 -1.3116,0.15937 -1.7622,-0.15683 -5.5313,0.28125 -3.5539,0.41309 -9.0054,1.27282 -10.25,1.9375 -1.599,-0.29729 -3.8577,-0.53419 -5.8437,-0.34375 -3.0588,0.29332 -4.972,0.48399 -6.9063,0.65625 -1.9342,0.17227 -1.6886,0.42237 -2.9062,0.53125 -1.3162,0.1177 -1.7598,-0.16363 -5.5312,0.25 -3.5421,0.38845 -9.0079,1.20927 -10.2813,1.875 -1.5989,-0.29469 -3.8872,-0.50701 -5.875,-0.3125 -3.05829,0.29925 -4.9412,0.48024 -6.875,0.65625 -0.65749,0.0598 -1.04005,0.17856 -1.34375,0.25 -0.4277,0.11896 -0.6835,0.21807 -1.375,0.28125 -1.316,0.12026 -1.75975,-0.19488 -5.53125,0.21875 -3.55619,0.39002 -9.0056,1.23916 -10.25,1.90625 -1.59869,-0.29418 -3.85985,-0.52372 -5.84375,-0.3125 -3.0557,0.32533 -4.97405,0.52624 -6.90625,0.71875 -1.93219,0.19251 -1.68975,0.44088 -2.90625,0.5625 -1.31488,0.13147 -1.76305,-0.16454 -5.53125,0.28125 -3.53889,0.41866 -8.9777,1.29217 -10.25,1.96875 -1.59759,-0.28104 -3.85995,-0.42043 -5.84375,-0.1875 -3.05198,0.35837 -4.945,0.56786 -6.875,0.78125 -0.65618,0.0726 -1.04065,0.17269 -1.34375,0.25 -0.42679,0.12723 -0.6849,0.2672 -1.375,0.34375 -1.31339,0.14569 -1.76735,-0.17402 -5.53125,0.3125 -3.54888,0.45876 -8.97865,1.41902 -10.21875,2.125 -1.59309,-0.24424 -3.8338,-0.38135 -5.8125,-0.125 -3.04759,0.39482 -4.9507,0.64845 -6.875,0.90625 -1.92429,0.25779 -1.7261,0.49353 -2.9375,0.65625 -1.30949,0.1759 -1.7472,-0.10438 -5.5,0.46875 -3.52429,0.53824 -8.9232,1.69917 -10.1875,2.4375 -1.58749,-0.20354 -3.8455,-0.25473 -5.8125,0.0937 -3.02619,0.53612 -4.8989,0.86169 -6.8125,1.1875 -0.65059,0.11077 -1.0137,0.27094 -1.3125,0.375 -0.42069,0.16488 -0.66345,0.3313 -1.34375,0.46875 -1.2947,0.26159 -1.7271,-0.006 -5.4375,0.8125 -3.49848,0.77195 -8.8459,2.38293 -10.0625,3.21875 -1.5629,-0.0774 -3.7575,0.0853 -5.6875,0.59375 -2.97238,0.78313 -4.8177,1.23209 -6.6875,1.75 -1.87,0.5179 -1.66665,0.76728 -2.84375,1.09375 -1.27249,0.3529 -1.69705,0.10709 -5.34375,1.1875 -3.42468,1.01463 -8.6494,2.93317 -9.875,3.84375 -1.53878,0.0127 -3.7198,0.27222 -5.625,0.875 -2.93098,0.92734 -4.75035,1.45842 -6.59375,2.0625 -0.62679,0.20538 -0.99165,0.39258 -1.28125,0.53125 -0.40758,0.21361 -0.6533,0.40875 -1.3125,0.625 -1.2545,0.41154 -1.68615,0.18904 -5.28125,1.4375 -3.38989,1.17717 -8.59495,3.2137 -9.78125,4.15625 -1.52388,0.0597 -3.65005,0.39487 -5.53125,1.0625 -2.89739,1.02829 -4.69905,1.67548 -6.53125,2.3125 -1.8322,0.63701 -1.62785,0.84854 -2.78125,1.25 -1.24679,0.43396 -1.66355,0.19972 -5.21875,1.5625 -3.3387,1.2798 -8.4871,3.48255 -9.6875,4.46875 -1.50718,0.10769 -3.6357,0.4988 -5.5,1.21875 -2.86818,1.1076 -4.6239,1.78156 -6.4375,2.46875 -0.6167,0.23363 -0.99645,0.44203 -1.28125,0.59375 10e-6,0 0,0.0295 0,0.0312 l -8,3.1875 1.8125,14.71875 c -0.25799,-0.0608 6.1875,3.3125 6.1875,3.3125 0.22641,-0.14468 0.44895,-0.27261 0.71875,-0.375 1.08052,-0.40998 2.1716,-0.21577 6,-1.6875 3.82852,-1.47174 5.22405,-2.00498 5.90625,-2.40625 0.67961,-0.39978 1.61175,-0.87937 2.21875,-1.53125 1.82692,-0.13775 3.5708,-0.49323 4.9375,-1 2.968,-1.10052 4.87535,-1.80619 6.78125,-2.46875 1.90581,-0.66254 2.35415,-1.41487 3.40625,-1.78125 1.09162,-0.38011 2.1951,-0.16538 6.0625,-1.53125 3.8674,-1.36586 5.28315,-1.82708 5.96875,-2.21875 0.70111,-0.40052 1.7008,-0.93298 2.3125,-1.59375 1.97081,-0.0547 3.81695,-0.38463 5.28125,-0.875 3.00152,-1.00508 4.92615,-1.62171 6.84375,-2.25 1.53861,-0.5041 2.17415,-1.04677 2.90625,-1.4375 0.23022,-0.13431 0.4759,-0.25373 0.75,-0.34375 1.09832,-0.36048 2.18145,-0.0814 6.09375,-1.3125 3.91231,-1.23113 5.366,-1.67295 6.0625,-2.03125 0.69391,-0.35697 1.6301,-0.79261 2.25,-1.40625 1.86521,-0.0227 3.63585,-0.26683 5.03125,-0.6875 3.0304,-0.91354 4.9924,-1.4301 6.9375,-1.96875 1.94512,-0.53864 2.4262,-1.26452 3.5,-1.5625 1.11402,-0.30915 2.22,0.007 6.1875,-1.03125 3.9675,-1.03863 5.4175,-1.43273 6.125,-1.75 0.7348,-0.32959 1.8139,-0.75372 2.4375,-1.375 1.99782,0.116 3.85745,-0.0201 5.34375,-0.375 3.07811,-0.735 5.0834,-1.10094 7.0625,-1.5 1.58791,-0.32018 2.2443,-0.79055 3,-1.09375 0.23751,-0.1068 0.4669,-0.19276 0.75,-0.25 1.13341,-0.22919 2.30465,0.20893 6.34375,-0.5 4.03942,-0.70893 5.50025,-0.92709 6.21875,-1.1875 0.71581,-0.25944 1.70435,-0.56724 2.34375,-1.09375 1.9242,0.23949 3.7479,0.22453 5.1875,0 3.12642,-0.48762 5.15455,-0.70067 7.15625,-0.96875 2.00171,-0.26807 2.48875,-0.94514 3.59375,-1.09375 1.14642,-0.15418 2.27585,0.30157 6.34375,-0.21875 4.06781,-0.52032 5.56025,-0.69573 6.28125,-0.9375 0.73712,-0.24714 1.7981,-0.58623 2.4375,-1.125 2.05,0.33553 3.9737,0.39796 5.5,0.21875 3.1422,-0.36896 5.18,-0.55936 7.1875,-0.78125 1.61082,-0.17802 2.26465,-0.6082 3.03125,-0.84375 0.24091,-0.0855 0.49405,-0.1556 0.78125,-0.1875 1.1497,-0.12772 2.3013,0.34665 6.375,-0.125 4.0737,-0.47165 5.55905,-0.6106 6.28125,-0.84375 0.71941,-0.23227 1.70025,-0.47346 2.34375,-0.96875 1.9363,0.33346 3.77005,0.40424 5.21875,0.25 3.14601,-0.33495 5.1775,-0.51859 7.1875,-0.71875 2.00991,-0.20014 2.48415,-0.82639 3.59375,-0.9375 1.1511,-0.11528 2.2965,0.36506 6.375,-0.0625 4.0785,-0.42756 5.5889,-0.56209 6.3125,-0.78125 0.73922,-0.22386 1.7956,-0.51325 2.4375,-1.03125 2.057,0.39867 4.00185,0.4934 5.53125,0.34375 3.14871,-0.3081 5.1758,-0.47325 7.1875,-0.65625 1.61401,-0.14682 2.26305,-0.56055 3.03125,-0.78125 0.2413,-0.0809 0.49355,-0.12991 0.78125,-0.15625 1.15211,-0.10545 2.2929,0.39275 6.375,0 4.08211,-0.39275 5.5889,-0.53084 6.3125,-0.75 0.7209,-0.21833 1.6996,-0.4477 2.3437,-0.9375 1.9381,0.34999 3.7689,0.45438 5.2188,0.3125 3.1487,-0.3081 5.1758,-0.47325 7.1875,-0.65625 2.0116,-0.18299 2.5142,-0.83802 3.625,-0.9375 1.1523,-0.10323 2.2922,0.38483 6.375,0 4.0829,-0.38482 5.5887,-0.501 6.3125,-0.71875 0.7393,-0.22243 1.7956,-0.51449 2.4375,-1.03125 2.0574,0.40177 4.0029,0.50333 5.5313,0.34375 3.1465,-0.32852 5.177,-0.5227 7.1874,-0.71875 1.613,-0.15729 2.2657,-0.63148 3.0313,-0.875 0.2407,-0.088 0.4632,-0.12137 0.75,-0.15625 1.1483,-0.1397 2.3167,0.33991 6.375,-0.25 4.0583,-0.58992 5.5618,-0.77714 6.2813,-1.03125 0.7166,-0.25316 1.6746,-0.55807 2.3124,-1.09375 1.9197,0.21194 3.72,0.15141 5.1563,-0.0937 3.1191,-0.5324 5.1116,-0.92861 7.0937,-1.3125 1.9821,-0.38387 2.4743,-1.03965 3.5626,-1.28125 1.1287,-0.25066 2.2702,0.11629 6.25,-0.875 3.9795,-0.99127 5.4295,-1.4193 6.125,-1.78125 0.7222,-0.376 1.7617,-0.87058 2.375,-1.53125 1.9629,-0.012 3.7937,-0.29105 5.2187,-0.84375 2.9512,-1.1446 4.8732,-1.86942 6.6875,-2.75 1.4557,-0.70652 2.3191,-1.70203 2.5312,-2 0.2123,-0.29795 0.099,-0.72855 0.125,-0.75 0.043,-0.0352 0.3404,-0.094 0.5,-0.4375 0.859,-1.84707 2.3232,-5.62764 2.4376,-6.3125 0.1137,-0.68214 0.168,-1.35277 0.2187,-1.75 0.029,-0.2295 -0.1471,-0.8789 -0.125,-0.9375 0.031,-0.082 0.2883,-0.25057 0.3437,-0.5 0.2663,-1.19831 0.089,-2.20736 -0.125,-3.625 -0.2139,-1.41763 -0.9716,-4.61463 -1.625,-5.46875 -0.6589,-0.86172 -1.2248,-1.01051 -1.75,-1 z"
- transform="translate(0.08004571,-0.03125)" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter7001-5">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur7003-7" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6949-4"
- x="-0.10294895"
- width="1.2058979"
- y="-0.34224695"
- height="1.6844939">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6951-1" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6961-8"
- x="-0.09919104"
- width="1.1983821"
- y="-0.22643611"
- height="1.4528722">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6963-5" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6957-9"
- x="-0.098213427"
- width="1.1964267"
- y="-0.19838208"
- height="1.3967642">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6959-7" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6997-5">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6999-3" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6953-8"
- x="-0.098320946"
- width="1.1966419"
- y="-0.19750816"
- height="1.3950163">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6955-8" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6993-3"
- x="-0.098213255"
- width="1.1964265"
- y="-0.19838208"
- height="1.3967642">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6995-1" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6989-8"
- x="-0.098428868"
- width="1.1968577"
- y="-0.20287035"
- height="1.4057407">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6991-9" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6985-6"
- x="-0.098428868"
- width="1.1968577"
- y="-0.20853186"
- height="1.4170637">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6987-4" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6965-3"
- x="-0.099081434"
- width="1.1981629"
- y="-0.22529824"
- height="1.4505965">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6967-3" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6981-3"
- x="-0.10052545"
- width="1.2010509"
- y="-0.2742162"
- height="1.5484324">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6983-8" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6977-6"
- x="-0.10224481"
- width="1.2044896"
- y="-0.32371372"
- height="1.6474274">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6979-0" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6973-4"
- x="-0.10330495"
- width="1.2066098"
- y="-0.36439717"
- height="1.7287945">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6975-8" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6969-8"
- x="-0.10450897"
- width="1.2090179"
- y="-0.40468886"
- height="1.8093777">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6971-8" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7345-9">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.7233839"
- id="feGaussianBlur7347-7" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7333-7">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7335-6" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7285-4"
- x="-0.030884685"
- width="1.0617694"
- y="-0.10267408"
- height="1.2053483">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7287-3" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7289-0">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7291-3" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7293-0">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7295-9" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7337-2">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7339-5" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7297-4">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7299-0" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7301-5">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7303-9" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7305-4">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7307-6" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7309-9">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7311-2" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7313-2">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7315-4" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7317-7">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7319-7" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7321-5">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7323-4" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7329-8"
- x="-0.030991485"
- width="1.061983"
- y="-0.10931916"
- height="1.2186383">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7331-1" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7325-2"
- x="-0.031352691"
- width="1.0627054"
- y="-0.12140666"
- height="1.2428133">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7327-8" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter9048-9"
- x="-0.40879121"
- width="1.8175824"
- y="-0.71538466"
- height="2.4307692">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="21.92031"
- id="feGaussianBlur9050-3" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3631-6">
- <path
- style="display:inline;opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 760.16396,935.83377 c 6.7941,18.90279 10.49369,33.29969 11.8903,51.21189 1.39662,17.91234 -3.78268,51.80084 -2.90046,70.65614 0.88175,18.8452 8.13369,40.099 27.34463,48.9689 19.41887,8.9658 49.31924,10.2113 74.11984,-3.1456 24.8006,-13.357 57.40102,-70.3255 70.97426,-97.3087 13.62385,-27.08394 38.76107,-114.49737 44.6608,-149.76859 5.89973,-35.27121 2.55054,-41.30077 -4.61748,-49.05549 2.6403,-27.84015 -1.49972,-54.93543 13.10969,-87.18618 -30.24901,11.8257 -37.38229,40.1607 -48.31889,65.50508 -8.00091,-50.93293 0.20916,-71.27319 3.31889,-101.21936 -29.06476,14.77791 -42.86151,47.11402 -45,92.85714 -10.92395,-1.3042 -21.39144,-4.43423 -33.57143,-0.71429 -0.26404,-46.02334 -1.46356,-76.88941 8.91063,-114.20649 -53.25547,21.02686 -62.94728,106.5941 -56.05349,112.77792 -10.88282,0.535 -21.37108,-1.2973 -32.85714,2.85715 0.63892,-42.57135 -0.26046,-84.90861 -30,-122.85715 0,0 -30.95806,80.92234 -31.42857,103.57143 -0.47051,22.64909 9.45159,40.16588 9.45159,40.16588 0,0 -8.56807,36.74051 -6.29859,58.23223 2.29585,21.74146 20.4429,59.67617 27.26542,78.65809 z"
- id="path3633-8"
- sodipodi:nodetypes="czzzzzzcccccccccczczz"
- inkscape:connector-curvature="0" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3677-0">
- <path
- style="display:inline;opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 586.13271,997.98981 c 6.7941,18.90279 10.49369,33.29969 11.8903,51.21189 1.39662,17.9123 -3.78268,51.8008 -2.90046,70.6561 0.88175,18.8452 8.13369,40.099 27.34463,48.9689 19.41887,8.9658 49.31924,10.2113 74.11984,-3.1456 24.8006,-13.357 57.40102,-70.3255 70.97426,-97.3087 13.62385,-27.0839 38.76107,-114.49733 44.6608,-149.76855 5.89973,-35.27121 2.55054,-41.30077 -4.61748,-49.05549 2.6403,-27.84015 -1.49972,-54.93543 13.10969,-87.18618 -30.24901,11.8257 -37.38229,40.1607 -48.31889,65.50508 -8.00091,-50.93293 0.20916,-71.27319 3.31889,-101.21936 -29.06476,14.77791 -42.86151,47.11402 -45,92.85714 -10.92395,-1.3042 -21.39144,-4.43423 -33.57143,-0.71429 -0.26404,-46.02334 -1.46356,-76.88941 8.91063,-114.20649 -53.25547,21.02686 -62.94728,106.5941 -56.05349,112.77792 -10.88282,0.535 -21.37108,-1.2973 -32.85714,2.85715 0.63892,-42.57135 -0.26046,-84.90861 -30,-122.85715 0,0 -30.95806,80.92234 -31.42857,103.57143 -0.47051,22.64909 9.45159,40.16588 9.45159,40.16588 0,0 -8.56807,36.74051 -6.29859,58.23223 2.29585,21.74146 20.4429,59.67617 27.26542,78.65809 z"
- id="path3679-2"
- sodipodi:nodetypes="czzzzzzcccccccccczczz"
- inkscape:connector-curvature="0" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter3898-1">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="10.892985"
- id="feGaussianBlur3900-0" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3622-5">
- <path
- style="display:inline;opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 266.27183,924.57186 c -1.40727,18.80121 -1.1449,32.75103 2.08174,49.30328 3.22665,16.55234 16.40608,45.90736 20.3344,63.18376 3.92622,17.2671 2.69413,38.3096 -12.45944,51.1482 -15.31761,12.9774 -42.05127,21.5989 -67.8323,15.7338 -25.78106,-5.8653 -69.54907,-49.2234 -88.59019,-70.2283 C 100.6939,1012.6293 56.045183,939.86194 41.867508,909.43681 27.689836,879.01169 29.207903,872.71824 33.747793,863.90708 24.381071,839.38658 21.334081,813.84027 0.03533552,788.33044 30.360815,791.44488 43.915625,815.28677 60.161025,835.47019 54.631129,787.39416 42.10631,771.05369 31.787073,744.74589 c 29.994295,6.08166 50.57936,31.8724 63.979783,72.7125 9.554154,-3.91791 18.237764,-9.37294 30.187414,-9.0612 -11.2975,-41.6958 -17.94946,-69.91584 -36.687255,-101.06994 53.441965,5.67033 83.657025,80.63932 78.971425,87.9608 9.97797,-2.24399 19.00565,-6.53038 30.43653,-5.65167 -11.24896,-38.34702 -21.04781,-76.8679 -3.65971,-118.64818 0,0 48.28678,65.43687 54.38966,85.80577 6.10287,20.36891 1.51881,38.70052 1.51881,38.70052 0,0 16.95957,31.08529 20.29392,51.09413 3.3731,20.24135 -3.53269,59.10332 -4.94582,77.98324 z"
- id="path3624-1"
- sodipodi:nodetypes="czzzzzzcccccccccczczz"
- inkscape:connector-curvature="0" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter9024-1"
- x="-0.55453134"
- width="2.1090627"
- y="-0.51434779"
- height="2.0286956">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="20.912684"
- id="feGaussianBlur9026-0" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter9020-8"
- x="-0.32861114"
- width="1.6572223"
- y="-0.182"
- height="1.364">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="20.912684"
- id="feGaussianBlur9022-5" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter9044-0"
- x="-0.32631579"
- width="1.6526316"
- y="-0.84545463"
- height="2.6909094">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="21.92031"
- id="feGaussianBlur9046-6" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath4177-4">
- <path
- sodipodi:nodetypes="czzzzzzcccccccccczczz"
- id="path4179-6"
- d="m 586.13271,997.98981 c 6.7941,18.90279 10.49369,33.29969 11.8903,51.21189 1.39662,17.9123 -3.78268,51.8008 -2.90046,70.6561 0.88175,18.8452 8.13369,40.099 27.34463,48.9689 19.41887,8.9658 49.31924,10.2113 74.11984,-3.1456 24.8006,-13.357 57.40102,-70.3255 70.97426,-97.3087 13.62385,-27.0839 38.76107,-114.49733 44.6608,-149.76855 5.89973,-35.27121 2.55054,-41.30077 -4.61748,-49.05549 2.6403,-27.84015 -1.49972,-54.93543 13.10969,-87.18618 -30.24901,11.8257 -37.38229,40.1607 -48.31889,65.50508 -8.00091,-50.93293 0.20916,-71.27319 3.31889,-101.21936 -29.06476,14.77791 -42.86151,47.11402 -45,92.85714 -10.92395,-1.3042 -21.39144,-4.43423 -33.57143,-0.71429 -0.26404,-46.02334 -1.46356,-76.88941 8.91063,-114.20649 -53.25547,21.02686 -62.94728,106.5941 -56.05349,112.77792 -10.88282,0.535 -21.37108,-1.2973 -32.85714,2.85715 0.63892,-42.57135 -0.26046,-84.90861 -30,-122.85715 0,0 -30.95806,80.92234 -31.42857,103.57143 -0.47051,22.64909 9.45159,40.16588 9.45159,40.16588 0,0 -8.56807,36.74051 -6.29859,58.23223 2.29585,21.74146 20.4429,59.67617 27.26542,78.65809 z"
- style="display:inline;opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- inkscape:connector-curvature="0" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter4105-2">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="3.8640966"
- id="feGaussianBlur4107-5" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter4130-8"
- x="-0.49509686"
- width="1.9901937"
- y="-0.26708817"
- height="1.5341763">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="10.730622"
- id="feGaussianBlur4132-6" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter4141-2"
- x="-0.40611032"
- width="1.8122206"
- y="-0.30260596"
- height="1.6052119">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="9.8586086"
- id="feGaussianBlur4143-8" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8338-4">
- <path
- sodipodi:nodetypes="czzzzzzcccccccccczczz"
- id="path8340-7"
- d="m 266.27183,924.57185 c -1.40727,18.80122 -1.1449,32.75104 2.08174,49.30328 3.22666,16.55238 16.40609,45.90737 20.33441,63.18377 3.92621,17.2671 2.69413,38.3097 -12.45944,51.1482 -15.31761,12.9775 -42.05127,21.599 -67.8323,15.7338 -25.78106,-5.8653 -69.54908,-49.2234 -88.59019,-70.2283 C 100.6939,1012.6293 56.045182,939.86193 41.867507,909.4368 27.689835,879.01168 29.207902,872.71823 33.747792,863.90708 24.38107,839.38658 21.33408,813.84026 0.03533448,788.33044 30.360814,791.44487 43.915624,815.28676 60.161024,835.47019 54.631128,787.39416 42.106309,771.05368 31.787072,744.74589 c 29.994295,6.08165 50.57936,31.87239 63.979783,72.7125 9.554155,-3.91792 18.237765,-9.37294 30.187415,-9.0612 -11.2975,-41.6958 -17.94947,-69.91585 -36.687256,-101.06994 53.441966,5.67032 83.657026,80.63932 78.971426,87.9608 9.97797,-2.24399 19.00565,-6.53038 30.43653,-5.65167 -11.24897,-38.34703 -21.04782,-76.8679 -3.65971,-118.64819 0,0 48.28678,65.43688 54.38965,85.80578 6.10288,20.3689 1.51882,38.70051 1.51882,38.70051 0,0 16.95957,31.0853 20.29392,51.09414 3.3731,20.24134 -3.53269,59.10331 -4.94582,77.98323 z"
- style="display:inline;opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- inkscape:connector-curvature="0" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter8333-2">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="7.18"
- id="feGaussianBlur8335-4" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8359-0">
- <path
- sodipodi:nodetypes="czzzzzzcccccccccczczz"
- id="path8361-6"
- d="m 266.27183,924.57185 c -1.40727,18.80122 -1.1449,32.75104 2.08174,49.30328 3.22666,16.55238 16.40609,45.90737 20.33441,63.18377 3.92621,17.2671 2.69413,38.3097 -12.45944,51.1482 -15.31761,12.9775 -42.05127,21.599 -67.8323,15.7338 -25.78106,-5.8653 -69.54908,-49.2234 -88.59019,-70.2283 C 100.6939,1012.6293 56.045182,939.86193 41.867507,909.4368 27.689835,879.01168 29.207902,872.71823 33.747792,863.90708 24.38107,839.38658 21.33408,813.84026 0.03533448,788.33044 30.360814,791.44487 43.915624,815.28676 60.161024,835.47019 54.631128,787.39416 42.106309,771.05368 31.787072,744.74589 c 29.994295,6.08165 50.57936,31.87239 63.979783,72.7125 9.554155,-3.91792 18.237765,-9.37294 30.187415,-9.0612 -11.2975,-41.6958 -17.94947,-69.91585 -36.687256,-101.06994 53.441966,5.67032 83.657026,80.63932 78.971426,87.9608 9.97797,-2.24399 19.00565,-6.53038 30.43653,-5.65167 -11.24897,-38.34703 -21.04782,-76.8679 -3.65971,-118.64819 0,0 48.28678,65.43688 54.38965,85.80578 6.10288,20.3689 1.51882,38.70051 1.51882,38.70051 0,0 16.95957,31.0853 20.29392,51.09414 3.3731,20.24134 -3.53269,59.10331 -4.94582,77.98323 z"
- style="display:inline;opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- inkscape:connector-curvature="0" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter8354-2">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="6.82"
- id="feGaussianBlur8356-9" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3636-90">
- <path
- style="display:inline;opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 760.16396,935.83377 c 6.7941,18.90279 10.49369,33.29969 11.8903,51.21189 1.39662,17.91234 -3.78268,51.80084 -2.90046,70.65614 0.88175,18.8452 8.13369,40.099 27.34463,48.9689 19.41887,8.9658 49.31924,10.2113 74.11984,-3.1456 24.8006,-13.357 57.40102,-70.3255 70.97426,-97.3087 13.62385,-27.08394 38.76107,-114.49737 44.6608,-149.76859 5.89973,-35.27121 2.55054,-41.30077 -4.61748,-49.05549 2.6403,-27.84015 -1.49972,-54.93543 13.10969,-87.18618 -30.24901,11.8257 -37.38229,40.1607 -48.31889,65.50508 -8.00091,-50.93293 0.20916,-71.27319 3.31889,-101.21936 -29.06476,14.77791 -42.86151,47.11402 -45,92.85714 -10.92395,-1.3042 -21.39144,-4.43423 -33.57143,-0.71429 -0.26404,-46.02334 -1.46356,-76.88941 8.91063,-114.20649 -53.25547,21.02686 -62.94728,106.5941 -56.05349,112.77792 -10.88282,0.535 -21.37108,-1.2973 -32.85714,2.85715 0.63892,-42.57135 -0.26046,-84.90861 -30,-122.85715 0,0 -30.95806,80.92234 -31.42857,103.57143 -0.47051,22.64909 9.45159,40.16588 9.45159,40.16588 0,0 -8.56807,36.74051 -6.29859,58.23223 2.29585,21.74146 20.4429,59.67617 27.26542,78.65809 z"
- id="path3638-8"
- sodipodi:nodetypes="czzzzzzcccccccccczczz"
- inkscape:connector-curvature="0" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter4185-1">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="3.6164709"
- id="feGaussianBlur4187-3" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8392-1">
- <path
- sodipodi:nodetypes="czzzzzzcccccccccczczz"
- id="path8394-1"
- d="m 760.16396,935.83377 c 6.7941,18.90279 10.49369,33.29969 11.8903,51.21189 1.39662,17.91234 -3.78268,51.80084 -2.90046,70.65614 0.88175,18.8452 8.13369,40.099 27.34463,48.9689 19.41887,8.9658 49.31924,10.2113 74.11984,-3.1456 24.8006,-13.357 57.40102,-70.3255 70.97426,-97.3087 13.62385,-27.08394 38.76107,-114.49737 44.6608,-149.76859 5.89973,-35.27121 2.55054,-41.30077 -4.61748,-49.05549 2.6403,-27.84015 -1.49972,-54.93543 13.10969,-87.18618 -30.24901,11.8257 -37.38229,40.1607 -48.31889,65.50508 -8.00091,-50.93293 0.20916,-71.27319 3.31889,-101.21936 -29.06476,14.77791 -42.86151,47.11402 -45,92.85714 -10.92395,-1.3042 -21.39144,-4.43423 -33.57143,-0.71429 -0.26404,-46.02334 -1.46356,-76.88941 8.91063,-114.20649 -53.25547,21.02686 -62.94728,106.5941 -56.05349,112.77792 -10.88282,0.535 -21.37108,-1.2973 -32.85714,2.85715 0.63892,-42.57135 -0.26046,-84.90861 -30,-122.85715 0,0 -30.95806,80.92234 -31.42857,103.57143 -0.47051,22.64909 9.45159,40.16588 9.45159,40.16588 0,0 -8.56807,36.74051 -6.29859,58.23223 2.29585,21.74146 20.4429,59.67617 27.26542,78.65809 z"
- style="display:inline;opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- inkscape:connector-curvature="0" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter8379-0"
- x="-0.14413793"
- width="1.288276"
- y="-0.10278689"
- height="1.2055738">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="7.389266"
- id="feGaussianBlur8381-3" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8417-4">
- <path
- sodipodi:nodetypes="czzzzzzcccccccccczczz"
- id="path8419-03"
- d="m 760.16396,935.83377 c 6.7941,18.90279 10.49369,33.29969 11.8903,51.21189 1.39662,17.91234 -3.78268,51.80084 -2.90046,70.65614 0.88175,18.8452 8.13369,40.099 27.34463,48.9689 19.41887,8.9658 49.31924,10.2113 74.11984,-3.1456 24.8006,-13.357 57.40102,-70.3255 70.97426,-97.3087 13.62385,-27.08394 38.76107,-114.49737 44.6608,-149.76859 5.89973,-35.27121 2.55054,-41.30077 -4.61748,-49.05549 2.6403,-27.84015 -1.49972,-54.93543 13.10969,-87.18618 -30.24901,11.8257 -37.38229,40.1607 -48.31889,65.50508 -8.00091,-50.93293 0.20916,-71.27319 3.31889,-101.21936 -29.06476,14.77791 -42.86151,47.11402 -45,92.85714 -10.92395,-1.3042 -21.39144,-4.43423 -33.57143,-0.71429 -0.26404,-46.02334 -1.46356,-76.88941 8.91063,-114.20649 -53.25547,21.02686 -62.94728,106.5941 -56.05349,112.77792 -10.88282,0.535 -21.37108,-1.2973 -32.85714,2.85715 0.63892,-42.57135 -0.26046,-84.90861 -30,-122.85715 0,0 -30.95806,80.92234 -31.42857,103.57143 -0.47051,22.64909 9.45159,40.16588 9.45159,40.16588 0,0 -8.56807,36.74051 -6.29859,58.23223 2.29585,21.74146 20.4429,59.67617 27.26542,78.65809 z"
- style="display:inline;opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- inkscape:connector-curvature="0" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter8404-9"
- x="-0.090268657"
- width="1.1805373"
- y="-0.10250848"
- height="1.205017">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="5.3457272"
- id="feGaussianBlur8406-1" />
- </filter>
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient2843"
- id="linearGradient6951"
- gradientUnits="userSpaceOnUse"
- x1="347.89655"
- y1="1070.2124"
- x2="275.58191"
- y2="867.97992" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient8964"
- id="linearGradient6953"
- gradientUnits="userSpaceOnUse"
- gradientTransform="translate(450.03125,73.843964)"
- x1="603.84064"
- y1="627.85303"
- x2="616.24396"
- y2="585.42664" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient8952"
- id="linearGradient6955"
- gradientUnits="userSpaceOnUse"
- gradientTransform="translate(450.03125,73.843964)"
- x1="609.31244"
- y1="239.46866"
- x2="560.83142"
- y2="262.86206" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3961"
- id="linearGradient6957"
- gradientUnits="userSpaceOnUse"
- gradientTransform="translate(450.03125,73.843964)"
- x1="398.21429"
- y1="343.52289"
- x2="379.28571"
- y2="265.30862" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4084"
- id="linearGradient6959"
- gradientUnits="userSpaceOnUse"
- x1="182.35046"
- y1="256.11136"
- x2="145.53348"
- y2="542.20502" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4084"
- id="linearGradient6961"
- gradientUnits="userSpaceOnUse"
- x1="182.35046"
- y1="256.11136"
- x2="145.53348"
- y2="542.20502" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4478"
- id="linearGradient6963"
- gradientUnits="userSpaceOnUse"
- x1="412.08926"
- y1="404.91574"
- x2="417.375"
- y2="401.82648" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4478"
- id="linearGradient6965"
- gradientUnits="userSpaceOnUse"
- x1="411.91071"
- y1="404.91577"
- x2="417.375"
- y2="401.82648" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4478"
- id="linearGradient6967"
- gradientUnits="userSpaceOnUse"
- x1="411.91071"
- y1="405.54077"
- x2="417.375"
- y2="401.82648" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4478"
- id="linearGradient6969"
- gradientUnits="userSpaceOnUse"
- x1="412.08926"
- y1="405.54077"
- x2="417.375"
- y2="401.82648" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4478"
- id="linearGradient6971"
- gradientUnits="userSpaceOnUse"
- x1="411.73212"
- y1="405.54077"
- x2="417.375"
- y2="401.82648" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3660"
- id="linearGradient6973"
- gradientUnits="userSpaceOnUse"
- x1="1255.7386"
- y1="667.09216"
- x2="893.69995"
- y2="858.01099" />
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath6975">
- <rect
- id="rect6977"
- width="440"
- height="376"
- x="547.99994"
- y="205.32277"
- style="display:inline;opacity:1;fill:none;fill-opacity:1;stroke:#f8d615;stroke-width:18;stroke-linejoin:miter;stroke-miterlimit:1;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;enable-background:new" />
- </clipPath>
- <marker
- inkscape:stockid="Arrow1Send"
- orient="auto"
- refY="0"
- refX="0"
- id="Arrow1Send-4"
- style="overflow:visible"
- inkscape:isstock="true">
- <path
- inkscape:connector-curvature="0"
- id="path7188-9"
- d="M 0,0 5,-5 -12.5,0 5,5 0,0 Z"
- style="fill:#f8d615;fill-opacity:1;fill-rule:evenodd;stroke:#f8d615;stroke-width:1pt;stroke-opacity:1"
- transform="matrix(-0.2,0,0,-0.2,-1.2,0)" />
- </marker>
- </defs>
- <metadata
- id="metadata7">
- <rdf:RDF>
- <cc:Work
- rdf:about="">
- <dc:format>image/svg+xml</dc:format>
- <dc:type
- rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
- <dc:title></dc:title>
- </cc:Work>
- </rdf:RDF>
- </metadata>
- <g
- inkscape:groupmode="layer"
- id="layer1"
- inkscape:label="Shadow"
- transform="translate(48.571445,195.53053)" />
- <g
- inkscape:groupmode="layer"
- id="layer20"
- inkscape:label="New Ear"
- transform="translate(48.571445,195.53053)" />
- <g
- inkscape:groupmode="layer"
- id="layer21"
- inkscape:label="Rendered2"
- style="display:inline"
- transform="translate(48.571445,195.53053)" />
- <g
- inkscape:groupmode="layer"
- id="layer15"
- inkscape:label="Feet"
- style="display:inline"
- transform="translate(48.571445,195.53053)" />
- <g
- inkscape:groupmode="layer"
- id="layer16"
- inkscape:label="Left Foot"
- style="display:inline"
- transform="translate(48.571445,195.53053)">
- <rect
- style="display:inline;opacity:1;fill:#a8a8a8;fill-opacity:1;stroke:#000000;stroke-width:20.89992332;stroke-linejoin:miter;stroke-miterlimit:1;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;enable-background:new"
- id="rect6676-3-7-5"
- width="1876.7191"
- height="1562.9667"
- x="-38.121483"
- y="-86.153076" />
- <rect
- style="display:inline;opacity:1;fill:none;fill-opacity:1;stroke:#000000;stroke-width:20.92477036;stroke-linejoin:miter;stroke-miterlimit:1;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;enable-background:new"
- id="rect6676-3-7"
- width="1878.7875"
- height="1564.9603"
- x="2288.5129"
- y="-84.10511" />
- <rect
- style="display:inline;opacity:1;fill:#a8a8a8;fill-opacity:1;stroke:#f83615;stroke-width:20.39127541;stroke-linejoin:miter;stroke-miterlimit:1;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;enable-background:new"
- id="rect6676-3"
- width="1833.4282"
- height="1522.9458"
- x="2309.7717"
- y="-62.567806" />
- <g
- id="g4303">
- <path
- inkscape:export-ydpi="142.10527"
- inkscape:export-xdpi="142.10527"
- inkscape:export-filename="/home/cheeseness/Documents/LCA09/mascot/tuz_new.png"
- transform="matrix(10.726753,0,0,10.726753,-2882.1235,-4565.4583)"
- sodipodi:nodetypes="cccccccccsccccccccccc"
- id="path10326"
- d="m 304.64285,526.6479 c -10,0.35715 -18.21428,2.85714 -18.21428,2.85714 l 7.5,6.07143 10.35714,3.57143 16.07143,0.35714 22.5,-5.35714 7.85714,1.07143 20.35715,-2.14286 -10.35715,6.78572 c 5.45923,-1.02361 17.39329,3.56911 9.64286,5.35714 -1.74,0.40142 13.92857,-4.64285 13.92857,-4.64285 l 2.5,-4.64287 3.57143,-9.28571 11.42857,0 18.21428,-4.64286 3.57144,-4.99999 -16.07144,1.07142 -12.14285,2.14286 -14.64286,-5 -70.6921,16.70774 -5.37933,-5.27917 z"
- style="display:inline;opacity:0.5;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter11361);enable-background:new"
- inkscape:connector-curvature="0" />
- <g
- transform="matrix(0.71084,-0.1937433,0.262963,0.9648058,503.68027,136.48399)"
- id="g7882"
- style="display:inline;opacity:1;enable-background:new">
- <path
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:url(#radialGradient7904);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 245.12255,100.05344 c 0,0 -47.12811,-31.646921 -67.21465,-35.800939 -20.03792,-4.143963 -38.4729,-3.317578 -51.93364,13.607323 -13.46074,16.924901 -12.07739,61.265196 -13.53554,86.969546 -1.45815,25.70435 2.54945,70.17701 17.6046,88.66552 15.05516,18.4885 45.88634,13.58502 49.92695,21.4137 2.21283,4.28736 65.15228,-174.85515 65.15228,-174.85515 z"
- id="path7876"
- sodipodi:nodetypes="czzzzcc"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:url(#radialGradient7906);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 135.37935,82.017807 c 0,0 26.34355,1.938783 37.63307,13.903188 11.41494,12.097335 13.73457,21.331515 15.29586,37.734585 1.56337,16.42499 -0.84957,28.41812 -7.81382,36.03734 -6.96425,7.61922 -1.00429,19.58332 -25.91605,12.07107 -24.91176,-7.51225 -27.03224,-27.78298 -26.51523,-46.30475 0.51721,-18.52898 7.31617,-53.441433 7.31617,-53.441433 z"
- id="path7878"
- sodipodi:nodetypes="czzzzzc"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;opacity:1;fill:url(#radialGradient7908);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 135.648,81.927211 c 0,0 -4.64465,16.365075 0.58825,28.563099 5.48794,12.79254 27.22425,44.26007 27.22425,54.65565 l 22.65625,-5 c 2.54218,-6.96644 3.21052,-15.75206 2.1875,-26.5 -1.56129,-16.40307 -3.8663,-25.62141 -15.28125,-37.718749 -9.65488,-10.232047 -31.59311,-13.374857 -37.375,-14 z"
- id="path7880"
- sodipodi:nodetypes="czccssc"
- inkscape:connector-curvature="0" />
- </g>
- <path
- sodipodi:nodetypes="czzzcczzcc"
- id="path7917"
- d="m 845.03125,1154.7776 c -4.28571,0.7143 -27.62815,3.6181 -57.85714,10 -30.22899,6.3819 -57.31395,4.9661 -135.78608,17.3296 -79.85178,12.5808 -94.06436,42.5423 -108.12225,47.0643 -14.70014,4.7286 -145.37739,-65.8225 -145.37739,-65.8225 l 4.28572,-94.2857 c 0,0 85.88551,-16.2009 112.14285,-33.5714 26.25735,-17.3705 45.58238,-49.66602 59.28572,-71.42861 13.70334,-21.76259 32.85714,-71.42858 32.85714,-71.42858 l 238.57143,262.14289 z"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- inkscape:connector-curvature="0" />
- <path
- transform="translate(276,136)"
- sodipodi:nodetypes="ccccc"
- clip-path="url(#clipPath8658)"
- id="path7919"
- d="m 332.34019,898.38549 -32.73181,-61.29956 -37.61734,45.10646 c 2.17675,1.31711 5.77425,-20.85603 45.6004,-64.41708 l 24.74875,80.61018 z"
- style="display:inline;overflow:visible;visibility:visible;opacity:0.5;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter8888);enable-background:accumulate"
- inkscape:connector-curvature="0" />
- <path
- transform="translate(276,136)"
- sodipodi:nodetypes="cccccc"
- clip-path="url(#clipPath2833)"
- id="path7923"
- d="m 200.81833,863.03015 146.3711,-51.61879 243.95184,226.27414 -241.83052,140.0072 -181.01934,-87.6813 32.52692,-226.98125 z"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:url(#linearGradient2841);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter8892);enable-background:accumulate"
- inkscape:connector-curvature="0" />
- <path
- sodipodi:nodetypes="czzcczcc"
- id="path7921"
- d="m 642.88839,640.13471 c 0,0 -29.55406,40.57305 -47.85714,74.28571 -18.30309,33.71267 -58.62109,126.35694 -70.35714,171.07143 -11.7594,44.80344 -62.5,123.57145 -62.5,123.57145 l 76.07143,18.2143 c 0,0 11.80712,-12.8234 31.07142,-46.07146 19.2643,-33.24808 60.35715,-138.57143 60.35715,-138.57143 l 13.21428,-202.5 z"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#0f0f0f;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- inkscape:connector-curvature="0" />
- <path
- transform="translate(276,136)"
- clip-path="url(#clipPath3665)"
- sodipodi:nodetypes="ccccccc"
- id="path7925"
- d="m 430.28131,381.94122 c -7.07106,2.82843 -236.18124,32.15181 -236.18124,32.15181 l -39.63961,359.83304 90.19849,92.63961 52.3259,-114.5513 100.46804,-186.39192 32.82842,-183.68124 z"
- style="display:inline;overflow:visible;visibility:visible;opacity:0.4;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter8856);enable-background:accumulate"
- inkscape:connector-curvature="0" />
- <path
- sodipodi:nodetypes="czzzzcc"
- id="path7927"
- d="m 969.67051,1164.0346 c 0,0 23.25628,11.3937 36.06779,20.4761 12.6974,9.0015 29.4724,24.6491 41.6924,37.3605 12.3055,12.8002 20.1127,22.5987 41.5327,24.1608 21.4322,1.5629 53.2824,-8.7876 73.296,-24.6642 20.0135,-15.8766 45.6469,-69.2328 45.6469,-69.2328 l -127.1608,-143.0717"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- inkscape:connector-curvature="0" />
- <path
- transform="translate(276,136)"
- sodipodi:nodetypes="ccccc"
- clip-path="url(#clipPath8642)"
- id="path7929"
- d="M 331.34019,641.50471 216.17367,835.36467 260.2153,925.96265 357.79603,732.21539 331.34019,641.50471 Z"
- style="display:inline;overflow:visible;visibility:visible;opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter8860);enable-background:accumulate"
- inkscape:connector-curvature="0" />
- <g
- inkscape:transform-center-y="-28.255779"
- inkscape:transform-center-x="-347.89063"
- transform="matrix(0.9934486,0.1142802,-0.1142802,0.9934486,-9.24324,588.09054)"
- id="g7931"
- style="display:inline;opacity:1;enable-background:new">
- <path
- id="path7933"
- d="m 1049.205,-282.26672 -0.09,0.008 c -1.3874,0.88445 -6.6033,1.6072 -6.629,9.52344 -0.024,7.42525 15.0129,17.09146 17.1563,18.09375 1.7302,0.80909 3.5916,1.40876 5.4063,1.71875 l 1.4374,0.21875 c 1.9197,0.21194 3.72,0.15141 5.1563,-0.0937 3.1191,-0.5324 5.1116,-0.92861 7.0937,-1.3125 1.9821,-0.38387 2.4743,-1.03965 3.5626,-1.28125 1.1287,-0.25066 2.2702,0.11629 6.25,-0.875 3.9795,-0.99128 5.4294,-1.4193 6.125,-1.78125 0.7222,-0.37601 1.7617,-0.87058 2.375,-1.53125 1.9629,-0.012 3.7937,-0.29105 5.2187,-0.84375 2.9512,-1.14461 4.8732,-1.86942 6.6875,-2.75 1.4557,-0.70653 2.3191,-1.70203 2.5312,-2 0.2123,-0.29796 0.099,-0.72855 0.125,-0.75 0.043,-0.0352 0.3405,-0.094 0.5,-0.4375 0.859,-1.84708 2.3232,-5.62764 2.4376,-6.3125 0.1137,-0.68215 0.168,-1.35277 0.2187,-1.75 0.029,-0.22951 -0.1471,-0.8789 -0.125,-0.9375 0.031,-0.082 0.2883,-0.25057 0.3437,-0.5 0.2663,-1.19832 0.089,-2.20736 -0.125,-3.625 -0.2139,-1.41764 -0.9716,-4.61463 -1.625,-5.46875 -0.4194,-0.54857 -0.7993,-0.7925 -1.1562,-0.90625 -0.067,-0.0173 -0.1239,-0.0467 -0.1875,-0.0625 -0.021,-0.004 -0.042,0.003 -0.062,0 -0.3116,-0.0755 -0.6085,-0.15867 -1.1562,-0.21875 -0.9855,-0.10812 -2.4247,-0.2594 -3.9688,-0.25 -0.5147,0.003 -1.0371,0.0476 -1.5625,0.0937 -3.5589,0.31228 -9.0098,0.99108 -10.2187,1.625 -1.6331,-0.33402 -3.9482,-0.61223 -5.9376,-0.46875 -3.064,0.22097 -4.9677,0.34219 -6.9062,0.46875 -1.9384,0.12655 -1.6861,0.38864 -2.9062,0.46875 -1.3191,0.0866 -1.7869,-0.22325 -5.5626,0.0937 -3.5457,0.29772 -8.9806,0.99317 -10.2187,1.625 -1.6334,-0.33451 -3.9459,-0.61239 -5.9375,-0.46875 -3.0642,0.22098 -4.9678,0.37344 -6.9062,0.5 -0.6592,0.043 -1.0424,0.12393 -1.3438,0.1875 z"
- style="display:inline;opacity:1;fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- inkscape:connector-curvature="0" />
- <g
- transform="matrix(0.9975712,-0.06965428,0.06965428,0.9975712,872.72062,140.02502)"
- id="g7935"
- style="display:inline;filter:url(#filter7610);enable-background:new"
- clip-path="url(#clipPath7616)">
- <path
- style="display:inline;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 229.94262,-409.12268 c -3.55781,0.05 -9.0242,0.36009 -10.30334,0.90414 -1.60609,-0.44747 -3.90316,-0.88131 -5.89995,-0.87674 -3.07199,0.007 -4.96469,0.009 -6.90727,0 -0.66047,-0.003 -1.04759,0.0672 -1.35267,0.10959 0,0 0,1.09593 0,1.09593 0.11972,-0.17947 0.39252,-0.69046 0.94975,-0.76715 0.74758,-0.10289 5.16928,-0.15123 7.31019,-0.1096 1.7746,0.0345 4.45523,0.27427 6.38921,0.95895 0.3214,0.11378 0.61925,0.27378 0.89219,0.41097 1.96342,0.98693 7.94336,4.30154 7.94336,4.30154 0,0 -6.63275,-3.94768 -7.48287,-4.43853 -0.20331,-0.11739 -0.57464,-0.25769 -1.03609,-0.41098 1.22063,-0.44779 5.07597,-0.61971 7.82823,-0.71235 3.0245,-0.10182 3.34776,-0.0896 5.41069,0.19179 2.12931,0.29043 3.33851,0.60276 3.33851,0.60276 -1e-5,0 -0.0784,-0.64118 1.03609,-0.79455 0.74757,-0.10289 5.16929,-0.15123 7.31019,-0.1096 2.0695,0.0403 5.36605,0.40716 7.2814,1.36992 1.00332,0.50433 3.03564,1.56863 4.79535,2.53571 l 0.0956,-0.0194 c 0,0 -3.58034,-2.16242 -4.43047,-2.65327 -0.20331,-0.11739 -0.57463,-0.25769 -1.03609,-0.41098 1.22062,-0.44779 5.04719,-0.61971 7.79945,-0.71235 3.0245,-0.10182 3.34775,-0.0896 5.41069,0.19179 1.95316,0.2664 3.01292,0.53006 3.19461,0.57536 0,0 -0.0271,-0.31146 -0.0271,-0.31146 -0.40903,-0.13645 -0.71424,-0.23335 -1.40038,-0.35748 -1.30081,-0.23533 -3.39912,-0.60156 -5.50857,-0.56398 -3.57195,0.0636 -9.05328,0.35596 -10.30334,0.90414 -1.60583,-0.44695 -3.87662,-0.8813 -5.87117,-0.87674 -3.07199,0.007 -4.99348,0.009 -6.93605,0 -1.94256,-0.009 -1.71268,0.27907 -2.93558,0.27398 -1.32191,-0.005 -1.76612,-0.35463 -5.55459,-0.30138 0,0 0,0 0,0"
- id="path7937"
- sodipodi:nodetypes="ccssscsssscscsscsssccscssccsscssscc"
- inkscape:connector-curvature="0" />
- <path
- sodipodi:nodetypes="cssccsscc"
- style="display:inline;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 206.1989,-407.47878 c 1.92021,0.81706 4.57715,2.19283 6.15897,3.39739 1.58184,1.20456 2.90757,1.77368 5.55459,3.91795 0.88557,0.71738 1.74865,1.34985 2.59193,1.92174 l 0.54057,-0.19011 c -0.71323,-0.48339 -1.46776,-1.02031 -2.26909,-1.62203 -2.82223,-2.11921 -3.62655,-2.80973 -6.01507,-4.27414 -2.38854,-1.4644 -4.09948,-2.36576 -6.5619,-3.1508 0,0 0,0 0,0"
- id="path7939"
- inkscape:connector-curvature="0" />
- <path
- sodipodi:nodetypes="csccscc"
- style="display:inline;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 237.79963,-407.47878 c 1.92021,0.81706 4.60594,2.19283 6.18775,3.39739 0.81307,0.61916 1.55849,1.07042 2.45046,1.65401 l 0.649,-0.11666 c -0.79831,-0.57637 -1.57177,-1.09435 -2.69653,-1.78394 -2.38854,-1.4644 -4.12826,-2.36576 -6.59068,-3.1508 0,0 0,0 0,0"
- id="path7941"
- inkscape:connector-curvature="0" />
- </g>
- <g
- id="g7943"
- clip-path="url(#clipPath7606)">
- <path
- sodipodi:nodetypes="czzzzzzzzzzzzzz"
- id="path7945"
- d="m 1056.25,-278.80481 c 4.1446,-1.47877 10,3.125 10,3.125 0.899,0.28092 2.7251,-0.89447 2.6243,-1.68614 0,0 -1.5503,-1.86062 -0.3743,-2.93886 1.176,-1.07824 5.296,1.50738 7.5,1.625 2.204,0.11762 5.5621,-0.22941 7,-0.75 1.4379,-0.52059 1.1129,-1.42459 2.625,-1.75 1.5121,-0.32541 5.1189,1.03754 7.0605,1.16883 1.9416,0.13129 4.6481,0.33427 5.8145,-0.16883 1.1664,-0.5031 0.1782,-1.15921 1.875,-1.875 1.6968,-0.71579 7.7602,-0.95662 9.625,-0.125 1.8648,0.83162 1.8099,0.5192 2.625,3 0.8151,2.4808 7.4398,5.16285 -1.125,13.375 -8.5648,8.21215 -59.3779,13.78594 -65.625,2.75 -6.2471,-11.03594 6.2304,-14.27123 10.375,-15.75 z"
- style="display:inline;opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter7578);enable-background:new"
- inkscape:connector-curvature="0" />
- <path
- sodipodi:nodetypes="czzzzzzzzzzzzzz"
- id="path7947"
- d="m 1058.5,-275.42981 c 4.1446,-1.47877 10,3.125 10,3.125 0.899,0.28092 2.7251,-0.89447 2.6243,-1.68614 0,0 -1.5503,-1.86062 -0.3743,-2.93886 1.176,-1.07824 5.296,1.50738 7.5,1.625 2.204,0.11762 5.5621,-0.22941 7,-0.75 1.4379,-0.52059 1.1129,-1.42459 2.625,-1.75 1.5121,-0.32541 5.1189,1.03754 7.0605,1.16883 1.9416,0.13129 4.6481,0.33427 5.8145,-0.16883 1.1664,-0.5031 0.1782,-1.15921 1.875,-1.875 1.6968,-0.71579 7.7602,-0.95662 9.625,-0.125 1.8648,0.83162 1.8099,0.5192 2.625,3 0.8151,2.4808 7.4398,5.16285 -1.125,13.375 -8.5648,8.21215 -59.3779,13.78594 -65.625,2.75 -6.2471,-11.03594 6.2304,-14.27123 10.375,-15.75 z"
- style="display:inline;opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter7594);enable-background:new"
- inkscape:connector-curvature="0" />
- </g>
- </g>
- <path
- sodipodi:nodetypes="cscccccccccccc"
- id="path7949"
- d="m 628.24553,347.99185 c -3.80443,-25.26423 -16.80972,-50.63802 -17.1568,-75.52523 -0.18626,-13.35552 3.27285,-26.57091 13.75553,-39.55405 36.34702,-65.29583 116.94091,-84.69468 185.93466,-91.46542 86.92239,-11.0168 184.91267,17.94007 233.37138,95.40128 54.124,75.7333 56.6747,172.53912 80.612,259.52795 29.4378,127.1276 54.7791,256.21414 60.3922,386.85035 -3.0634,78.18185 -8.4263,165.18417 -60.5032,228.13417 -48.0265,50.3574 -122.7864,50.053 -187.06985,59.0023 -90.55539,4.655 -184.35153,-16.1458 -261.7839,-64.1982 -64.77564,-37.94 -95.73019,-113.47867 -97.2794,-186.01962 -8.38917,-79.87516 26.39152,-153.80851 51.6204,-227.15961 7.47061,-82.76107 9.41286,-166.24775 9.65334,-249.38484 -0.83682,-32.19544 -7.08953,-63.81733 -11.54636,-95.60908 z"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#101414;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- inkscape:connector-curvature="0" />
- <path
- transform="translate(276,136)"
- clip-path="url(#clipPath8616)"
- sodipodi:nodetypes="ccccczzzcc"
- id="path7951"
- d="m 311.83409,415.43155 9.8995,121.62237 -60.10408,136.47161 15.55635,174.65537 c 15.61326,61.8792 32.18545,98.66905 74.37615,117.05383 4.31911,-36.23998 -38.61152,-142.95988 -39.24264,-189.11984 -0.63145,-46.18445 10.83034,-108.60786 30.67767,-158.29647 20.04835,-50.19188 36.89674,-44.84642 42.12489,-92.59293 5.22815,-47.74651 -17.4264,-149.39192 -17.4264,-149.39192 l -55.86144,39.59798 z"
- style="display:inline;overflow:visible;visibility:visible;opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter8940);enable-background:accumulate"
- inkscape:connector-curvature="0" />
- <path
- sodipodi:nodetypes="czcc"
- id="path7953"
- d="m 1010.0312,655.49186 c 0,0 16.7552,37.01806 28.7015,53.95395 11.9462,16.93589 52.7271,56.04605 52.7271,56.04605 l 52.5972,-127.58975"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:url(#linearGradient8970);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- inkscape:connector-curvature="0" />
- <path
- transform="translate(276,136)"
- clip-path="url(#clipPath8209)"
- sodipodi:nodetypes="cccc"
- id="path7955"
- d="m 730.31998,536.56864 c 0,8.48528 42.54774,58.46803 42.54774,58.46803 l 12.60659,-28.76954 -55.15433,-29.69849 z"
- style="display:inline;overflow:visible;visibility:visible;opacity:0.07999998;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter8822);enable-background:accumulate"
- inkscape:connector-curvature="0" />
- <g
- clip-path="url(#clipPath3998)"
- id="g7957"
- style="display:inline;opacity:1;enable-background:new"
- transform="translate(450.03125,73.843964)">
- <g
- id="g7959"
- style="filter:url(#filter3677)"
- transform="translate(-174.03125,62.156036)">
- <g
- style="filter:url(#filter3785)"
- id="g7961">
- <path
- style="display:inline;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 425.88244,476.99186 c 10.80543,-1.47866 24.74401,3.35451 44.64286,3.21428 19.89885,-0.14023 57.45322,-16.91122 82.14285,-17.14286 24.68963,-0.23164 62.7517,12.28406 79.28572,15 16.53402,2.71594 22.84832,-0.15852 27.49999,7.85715 4.65167,8.01567 1.92671,10.74724 -10.35714,20.71429 -12.28385,9.96705 -40.78968,12.63632 -66.07143,12.85714 -25.28234,0.22082 -70.38129,7.07852 -95.35714,3.92856 -24.97585,-3.14996 -56.93756,-7.82267 -68.92857,-17.85714 -11.99101,-10.03447 -19.85084,-16.73182 -17.5,-23.92857 2.35084,-7.19675 13.83743,-3.16419 24.64286,-4.64285 z"
- id="path7963"
- sodipodi:nodetypes="czzzzzzzzzz"
- inkscape:connector-curvature="0" />
- <rect
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- id="rect7965"
- width="381.83765"
- height="181.01935"
- x="343.6539"
- y="412.60312" />
- </g>
- <g
- style="filter:url(#filter3785)"
- id="g7967">
- <path
- transform="translate(174.03125,-62.156036)"
- style="display:inline;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 687.14286,452.36218 c -10.46169,9.71443 -86.9796,19.00514 -100.71429,29.28572 -13.73469,10.28058 -14.75252,12.88826 -12.14286,20 2.60966,7.11174 6.54527,9.40572 25.71429,8.57142 19.16902,-0.8343 98.57143,-27.62172 98.57143,-21.42857 l -11.42857,-36.42857 z"
- id="path7969"
- sodipodi:nodetypes="czzzcc"
- inkscape:connector-curvature="0" />
- <rect
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- id="rect7971"
- width="207.8894"
- height="162.63455"
- x="702.86414"
- y="344.82138" />
- </g>
- </g>
- <g
- id="g7973"
- style="display:inline;opacity:0.18000004;enable-background:new"
- transform="translate(-174.03125,62.156036)">
- <g
- style="filter:url(#filter3785)"
- id="g7975">
- <path
- style="display:inline;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 425.88244,476.99186 c 10.80543,-1.47866 24.74401,3.35451 44.64286,3.21428 19.89885,-0.14023 57.45322,-16.91122 82.14285,-17.14286 24.68963,-0.23164 62.7517,12.28406 79.28572,15 16.53402,2.71594 22.84832,-0.15852 27.49999,7.85715 4.65167,8.01567 1.92671,10.74724 -10.35714,20.71429 -12.28385,9.96705 -40.78968,12.63632 -66.07143,12.85714 -25.28234,0.22082 -70.38129,7.07852 -95.35714,3.92856 -24.97585,-3.14996 -56.93756,-7.82267 -68.92857,-17.85714 -11.99101,-10.03447 -19.85084,-16.73182 -17.5,-23.92857 2.35084,-7.19675 13.83743,-3.16419 24.64286,-4.64285 z"
- id="path7977"
- sodipodi:nodetypes="czzzzzzzzzz"
- inkscape:connector-curvature="0" />
- <rect
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- id="rect7979"
- width="381.83765"
- height="181.01935"
- x="343.6539"
- y="412.60312" />
- </g>
- <g
- style="filter:url(#filter3785)"
- id="g7981">
- <path
- transform="translate(174.03125,-62.156036)"
- style="display:inline;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 687.14286,452.36218 c -10.46169,9.71443 -86.9796,19.00514 -100.71429,29.28572 -13.73469,10.28058 -14.75252,12.88826 -12.14286,20 2.60966,7.11174 6.54527,9.40572 25.71429,8.57142 19.16902,-0.8343 98.57143,-27.62172 98.57143,-21.42857 l -11.42857,-36.42857 z"
- id="path7983"
- sodipodi:nodetypes="czzzcc"
- inkscape:connector-curvature="0" />
- <rect
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- id="rect7985"
- width="207.8894"
- height="162.63455"
- x="702.86414"
- y="344.82138" />
- </g>
- </g>
- </g>
- <path
- transform="translate(276,136)"
- sodipodi:nodetypes="cccccscc"
- clip-path="url(#clipPath8604)"
- id="path7987"
- d="M 582.65599,-7.4183011 695.79307,78.848726 804.68752,337.64981 842.87128,545.5392 963.07944,637.46308 c 0,0 -12.72793,-287.08535 -19.799,-313.95541 C 936.20938,296.63761 793.37381,-69.643698 793.37381,-69.643698 L 582.65599,-7.4183011 Z"
- style="display:inline;overflow:visible;visibility:visible;opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter8802);enable-background:accumulate"
- inkscape:connector-curvature="0" />
- <path
- sodipodi:nodetypes="czzzzzzc"
- id="path7989"
- d="m 964.13839,239.599 c 0,0 8.67732,10.89662 24.10715,11.96428 15.42986,1.06766 49.72166,-39.95267 70.17856,-52.14285 20.4793,-12.20353 47.0464,-26.60225 63.9286,-20.35714 16.8821,6.2451 22.1578,26.43609 27.8571,48.03571 5.6994,21.59961 6.7186,61.81389 -2.6785,92.85715 -9.3972,31.04325 -50.5033,73.10375 -65.3572,103.39285 -14.8539,30.2891 -11.6071,39.82143 -11.6071,39.82143"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:url(#linearGradient8958);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- inkscape:connector-curvature="0" />
- <path
- sodipodi:nodetypes="czzzzc"
- id="path7991"
- d="m 1124.4955,207.63471 c -15.8928,-0.89286 -49.7188,12.10583 -66.0714,24.28572 -16.4386,12.2439 -29.2209,24.1144 -29.2857,52.14285 -0.065,28.20604 13.1191,39.07641 29.1071,46.96429 15.988,7.88789 33.6862,7.11928 51.9643,-11.78571 18.2782,-18.905 14.2857,-111.60715 14.2857,-111.60715 z"
- style="display:inline;opacity:1;fill:url(#radialGradient3315);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- inkscape:connector-curvature="0" />
- <ellipse
- clip-path="url(#clipPath4100)"
- transform="matrix(0.9434749,-0.1239943,0.1440089,1.0957669,451.94827,134.5988)"
- id="path7993"
- style="display:inline;overflow:visible;visibility:visible;opacity:0.75;fill:url(#radialGradient3543);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter4120);enable-background:accumulate"
- cx="385"
- cy="237.00504"
- rx="86.428574"
- ry="73.928574" />
- <path
- mask="url(#mask3684)"
- sodipodi:nodetypes="csczzc"
- id="path7995"
- d="m 527.60588,407.44884 c 0,0 -122.04144,38.40348 -187.51434,9.63181 -65.47289,-28.77166 -74.37725,-124.71847 -74.37725,-124.71847 0,0 73.38158,-80.50393 129.92078,-83.61476 55.82705,-3.07164 90.57386,20.14332 114.87001,65.85171 24.352,45.81348 17.1008,132.84971 17.1008,132.84971 z"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:url(#radialGradient3915);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- transform="translate(450.03125,73.843964)"
- inkscape:connector-curvature="0" />
- <path
- sodipodi:nodetypes="czcc"
- id="path7997"
- d="m 772.17411,393.349 c 0,0 36.21754,-27.38247 51.60714,-35.89286 15.17734,-8.39301 25.71428,-11.60714 35.89285,-11.60714 l -15.53571,66.96428"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:url(#linearGradient3959);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- inkscape:connector-curvature="0" />
- <circle
- transform="translate(449.49554,74.915393)"
- id="path7999"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:url(#radialGradient3933);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- cx="409.28571"
- cy="306.64789"
- r="36.25" />
- <path
- transform="translate(276,136)"
- clip-path="url(#clipPath8616)"
- sodipodi:nodetypes="cccccccccc"
- id="path8001"
- d="m 311.83409,415.43155 9.8995,121.62237 -60.10408,136.47161 15.55635,174.65537 c 15.61326,61.8792 32.18545,98.66905 74.37615,117.05383 4.31911,-36.23998 8.68161,-72.36764 -31.24264,-223.11984 l 17.67767,-69.29647 72.12489,-138.59293 -42.4264,-158.39192 -55.86144,39.59798 z"
- style="display:inline;overflow:visible;visibility:visible;opacity:0.3;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter8806);enable-background:accumulate"
- inkscape:connector-curvature="0" />
- <path
- sodipodi:nodetypes="czzcc"
- id="path8003"
- d="m 635.21025,581.13004 c -14.14214,12.72792 39.23347,34.58015 76.36753,24.04163 37.13406,-10.53852 104.64487,-35.56437 103.23759,-79.19596 -1.40728,-43.63158 -76.36753,-128.69343 -76.36753,-128.69343 L 635.21025,581.13004 Z"
- style="display:inline;overflow:visible;visibility:visible;opacity:0.5;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter8826);enable-background:accumulate"
- inkscape:connector-curvature="0" />
- <circle
- transform="translate(449.67411,74.915393)"
- id="path8005"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:url(#radialGradient3991);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- cx="410"
- cy="306.64789"
- r="23.214285" />
- <circle
- transform="translate(451.99554,73.486821)"
- id="path8007"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter3981);enable-background:accumulate"
- cx="414.28571"
- cy="303.07648"
- r="7.5" />
- <path
- sodipodi:nodetypes="czzzczc"
- id="path8009"
- d="m 789.31696,478.349 c 0,0 7.02281,19.56859 -1.07143,35 -8.09424,15.43141 -42.32317,38.98822 -67.49999,50 -25.30972,11.06991 -85.473,32.96393 -101.78572,41.96428 -16.46148,9.08243 -18.21428,12.67857 -18.21428,12.67857 0,0 -7.14693,-19.06441 28.74999,-51.7857 36.17211,-32.97214 142.02712,-48.0495 159.82143,-87.85715 z"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:url(#radialGradient4112);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- inkscape:connector-curvature="0" />
- <g
- transform="translate(780.74553,74.55825)"
- id="g8011"
- style="display:inline;opacity:1;enable-background:new">
- <path
- style="display:inline;opacity:1;fill:url(#radialGradient3585);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
- d="m 179.64286,267.36218 c -22.41044,39.70292 -60.6161,115.78029 -69.28571,149.64286 -8.64721,33.7751 -8.77199,66.41654 -0.35715,86.42858 8.3602,19.88213 26.16398,35.6328 40.71428,41.42856 -0.59638,-14.37587 14.37295,-43.28583 72.85715,-72.5 58.62627,-29.28514 78.38163,-27.13086 103.57142,-47.14286 25.63006,-20.36176 8.20587,-79.64664 3.21429,-93.92857 -4.99158,-14.28193 -1.23663,-3.37974 -1.94602,-5.09301 -10.68928,-25.81592 -34.21432,-54.4303 -64.48255,-64.54984 -30.26823,-10.11954 -65.01776,-4.84837 -84.28571,5.71428 z"
- id="path8013"
- sodipodi:nodetypes="czzczzzszc"
- clip-path="url(#clipPath3999)"
- transform="translate(-329.81481,0)"
- inkscape:connector-curvature="0" />
- <ellipse
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:url(#radialGradient4060);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- id="path8015"
- transform="matrix(0.8823874,0.4705236,-0.4705236,0.8823874,-166.62245,2.387362)"
- cx="183.57143"
- cy="338.07648"
- rx="64.715881"
- ry="134.00607" />
- <ellipse
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:url(#radialGradient4062);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- id="path8017"
- transform="matrix(0.8823874,0.4705236,-0.4705236,0.8823874,-162.19388,-18.755495)"
- cx="183.57143"
- cy="338.07648"
- rx="64.715881"
- ry="134.00607" />
- <path
- style="display:inline;opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient3587);stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;filter:url(#filter4079);enable-background:new"
- d="m 179.64286,267.36218 c -22.41044,39.70292 -60.6161,115.78029 -69.28571,149.64286 -8.64721,33.7751 -8.77199,66.41654 -0.35715,86.42858 8.3602,19.88213 26.16398,35.6328 40.71428,41.42856 -0.59638,-14.37587 14.37295,-43.28583 72.85715,-72.5 58.62627,-29.28514 78.38163,-27.13086 103.57142,-47.14286 25.63006,-20.36176 8.20587,-79.64664 3.21429,-93.92857 -4.99158,-14.28193 -1.23663,-3.37974 -1.94602,-5.09301 -10.68928,-25.81592 -34.21432,-54.4303 -64.48255,-64.54984 -30.26823,-10.11954 -65.01776,-4.84837 -84.28571,5.71428 z"
- id="path8019"
- sodipodi:nodetypes="czzczzzszc"
- clip-path="url(#clipPath3999)"
- transform="translate(-329.81481,3e-7)"
- inkscape:connector-curvature="0" />
- </g>
- <circle
- transform="translate(452.55663,72.581273)"
- id="path8021"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- cx="310.71429"
- cy="398.07648"
- r="19.704132" />
- <circle
- transform="translate(450.55663,72.581273)"
- id="path8023"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:url(#radialGradient4056);fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4082);stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter4083);enable-background:accumulate"
- cx="310.71429"
- cy="398.07648"
- r="19.704132" />
- <circle
- transform="translate(450.55663,72.581273)"
- id="path8025"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:url(#radialGradient4119);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- cx="310.71429"
- cy="398.07648"
- r="19.704132" />
- <ellipse
- inkscape:transform-center-y="-3.6935079"
- inkscape:transform-center-x="-47.231976"
- transform="matrix(0.9969564,-0.07796167,0.07796167,0.9969564,436.61877,125.29509)"
- id="path8027"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:url(#radialGradient4868);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.99999994px;stroke-linecap:butt;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter4002);enable-background:accumulate"
- cx="429.56738"
- cy="377.42877"
- rx="72.079735"
- ry="44.547726" />
- <ellipse
- inkscape:transform-center-y="-13.056625"
- inkscape:transform-center-x="-20.955902"
- transform="matrix(1.4357951,-0.06999104,0.06999104,1.4357951,235.18065,-63.86546)"
- id="path8029"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:url(#radialGradient4876);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.99999994px;stroke-linecap:butt;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter4010);enable-background:accumulate"
- cx="437.6991"
- cy="391.21735"
- rx="36.611931"
- ry="22.627417" />
- <g
- style="display:inline;opacity:1;filter:url(#filter4053);enable-background:new"
- id="g8031"
- transform="translate(450.03125,73.843964)">
- <circle
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4484);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- id="path8033"
- cx="413.66071"
- cy="401.82648"
- r="3.2142856" />
- <circle
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4486);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- id="path8035"
- transform="translate(13.125009,8.1249913)"
- cx="413.66071"
- cy="401.82648"
- r="3.2142856" />
- <circle
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4488);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- id="path8037"
- transform="translate(32.946437,7.4999913)"
- cx="413.66071"
- cy="401.82648"
- r="3.2142856" />
- <circle
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4490);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- id="path8039"
- transform="translate(24.910723,-10.267866)"
- cx="413.66071"
- cy="401.82648"
- r="3.2142856" />
- <circle
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4492);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- id="path8041"
- transform="translate(47.589294,-0.6250087)"
- cx="413.66071"
- cy="401.82648"
- r="3.2142856" />
- </g>
- <path
- sodipodi:nodetypes="ccccccccc"
- id="path8043"
- d="m 896.20301,482.92837 c 0.98509,4.35008 4.53707,6.17948 7.38673,7.89182 4.46068,2.51292 6.52016,1.52211 9.15451,-0.75761 1.60195,-1.92117 10.68311,-4.69865 15.59423,-7.07107 4.32961,-1.45891 8.9033,-5.35873 13.38452,-8.33376 3.39514,-1.62724 5.34664,0.35464 7.82868,1.01015 2.94412,0.71661 4.41117,2.17175 6.06092,3.53554 2.39616,1.17519 -0.9279,3.14313 3.283,4.29314 1.19091,0.21794 2.41695,0.57645 3.28299,-0.50507"
- style="display:inline;opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- inkscape:connector-curvature="0" />
- <path
- sodipodi:nodetypes="cccccccccccc"
- id="path8045"
- d="m 910.85021,475.35223 c 2.31494,-0.032 3.17778,0.64253 5.49271,-0.82075 3.45564,-3.08113 5.40254,-3.14477 7.95495,-4.41942 3.02657,-1.31523 6.5357,8.15169 10.10153,9.84899 2.39509,-0.82142 1.28914,1.79379 1.45209,2.65165 0.0571,2.64684 2.80694,3.67806 4.35628,5.42957 3.31604,2.25549 7.37523,6.29546 11.11168,5.3033 6.44525,-2.93107 10.27922,-1.28146 16.28871,-7.38674 0.70405,-1.18134 -0.58425,-6.8946 3.09359,-7.19734 2.52399,0.25338 4.16667,0.0502 6.06092,0.56822 5.441,2.11719 7.73778,6.45 14.71034,7.95495 6.1829,0.96639 7.61264,3.79426 13.88959,5.05076"
- style="display:inline;opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- inkscape:connector-curvature="0" />
- <path
- sodipodi:nodetypes="ccccccccccccc"
- id="path8047"
- d="m 876.98133,483.52197 c 2.39858,-0.7938 6.10613,4.1921 8.17313,7.04568 0.59281,2.67952 1.15377,5.48645 0.75761,12.12183 0.78513,2.41754 2.68049,3.03095 4.79823,3.283 3.11745,-0.53678 5.87669,-1.3243 7.3236,-3.03046 1.8716,-1.94167 5.31253,2.39394 8.08122,4.04061 3.61009,1.91209 7.77378,1.97886 11.8693,2.27284 1.70358,-0.23064 2.3704,4.51515 3.28299,8.08123 0.38414,4.37806 -0.88544,6.89569 -1.76776,9.84898 -0.2943,2.49655 2.9885,3.52974 6.31345,4.54569 3.18244,0.74124 6.54424,1.66184 9.09137,1.76777 5.14186,0.87491 8.08874,2.69052 12.12183,4.04061 2.23914,0.81655 3.26019,2.24216 4.54569,3.53553"
- style="display:inline;opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- inkscape:connector-curvature="0" />
- <path
- transform="translate(276,136)"
- clip-path="url(#clipPath8514)"
- id="path8049"
- d="m 332,187.69519 c 0,0 57.5,-25.5 57.5,-28 0,-2.5 5.5,-52 5.5,-52 0,0 91,-48.500001 91.5,-50.500001 0.5,-2 86,-62.0000004 86,-62.0000004 L 386.5,17.195189 311,123.19519 l 21,64.5 z"
- style="display:inline;opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter8814);enable-background:new"
- inkscape:connector-curvature="0" />
- <path
- id="path8051"
- d="m 1697.2846,722.5514 c 0,0 -115.9655,73.5391 -123.0365,77.78174 -7.0711,4.24264 -230.5169,137.17872 -230.5169,137.17872 l 4.2427,39.59798 216.3747,-100.40917 117.3797,-101.82337 15.5563,-52.3259 z"
- style="display:inline;overflow:visible;visibility:visible;opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- inkscape:connector-curvature="0" />
- <path
- transform="translate(276,136)"
- sodipodi:nodetypes="cccccscccc"
- clip-path="url(#clipPath8610)"
- id="path8053"
- d="m 528.91587,556.85291 c -5.65685,-1.41421 -181.01933,74.95332 -181.01933,74.95332 l -33.94113,181.01934 51.09546,193.94823 257.2031,67.6813 c 0,0 206.47518,152.735 212.13203,148.4924 5.65686,-4.2426 168.2914,-193.7473 168.2914,-193.7473 L 842.87128,845.35248 796.20224,667.16157 528.91587,556.85291 Z"
- style="display:inline;overflow:visible;visibility:visible;opacity:0.5;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter8810);enable-background:accumulate"
- inkscape:connector-curvature="0" />
- <path
- sodipodi:nodetypes="czzzzzzczczczczzzc"
- id="path8055"
- d="m 1097.6433,613.88997 c 0,0 22.6195,-6.50681 35.7427,-5.87273 13.1233,0.63409 30.6416,1.93862 43.7089,12.18619 13.0673,10.24756 25.0677,27.14007 34.1124,58.36965 9.0446,31.22958 1.6983,99.25201 -6.1761,143.34735 -7.8743,44.09534 -28.2651,106.11298 -45,140 -16.7348,33.88702 -49.7977,77.49517 -60.5694,89.87617 -11.3642,13.062 -56.2059,36.4262 -79.4306,42.2667 5.3034,-10.6066 48.8998,-50.5889 35,-60.7143 -14.0189,-10.2123 -45.76,45.9824 -84.2931,29.0332 21.38231,-13.1321 41.7794,-51.1861 34.0406,-66.59448 -7.84024,-15.61039 -30.70492,48.75758 -93.53553,37.01288 30.05204,-27.5267 55.40706,-70.90401 41.2627,-82.9797 -14.41516,-12.30687 -60.46175,54.2932 -60.46175,54.2932 0,0 -2.8219,-41.70123 13.7732,-68.60737 16.63935,-26.97787 79.65297,-81.61527 99.55308,-111.70342 19.9002,-30.08814 33.6126,-66.00902 42.1355,-92.51794 8.5228,-26.50892 15.8009,-77.09954 15.8009,-77.09954"
- style="display:inline;opacity:1;fill:#0c0c0c;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- inkscape:connector-curvature="0" />
- <path
- transform="translate(276,136)"
- sodipodi:nodetypes="cccccccccc"
- clip-path="url(#clipPath8622)"
- id="path8057"
- d="m 770.74639,609.17881 -50.91169,97.58074 -79.90307,111.01576 34.64824,71.41778 42.42641,79.19597 72.12489,-45.25484 14.14214,-192.33305 21.2132,-138.59292 -14.14214,-90.15612 -39.59798,107.12668 z"
- style="display:inline;overflow:visible;visibility:visible;opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter8818);enable-background:accumulate"
- inkscape:connector-curvature="0" />
- <path
- transform="translate(276,136)"
- sodipodi:nodetypes="cczcccccc"
- clip-path="url(#clipPath8906)"
- id="path8059"
- d="m 295,846.19519 6.64488,-68.92285 c 0,0 90.31951,89.00457 162.35512,122.92285 72.03561,33.91828 308,62 308,62 l 154,-26 -36,162.00001 -286,26 -298,-89 -11,-189.00001 z"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter8810);enable-background:accumulate"
- inkscape:connector-curvature="0" />
- <path
- clip-path="url(#clipPath3602)"
- sodipodi:nodetypes="cccccccccccc"
- id="path8061"
- d="m 405.79629,845.99023 74.95332,65.05383 2.49963,16.8804 19.40336,10.15891 6.49204,23.05109 31.70905,-8.3711 14.84924,48.08324 c 12.25652,12.7279 89.79344,-113.1097 55.86143,38.1838 l -60.81118,16.2635 -89.20292,-94.69286 -62.82503,-53.79963 7.07106,-60.81118 z"
- style="display:inline;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3587);enable-background:new"
- transform="translate(450.03125,73.843964)"
- inkscape:connector-curvature="0" />
- <path
- sodipodi:nodetypes="czzzzzzzzcc"
- id="path8063"
- d="m 1159.317,918.349 c 54.2857,-1.42857 126.035,-15.05199 170,-26.78572 44.0527,-11.75714 125.8863,-36.34724 175.357,-57.85714 49.3393,-21.45272 113.6038,-59.2816 154.2859,-92.14285 40.5081,-32.72069 52.3899,-55.81981 60.7142,-33.57143 8.3691,22.36779 -16.4069,56.32562 -37.8571,81.07143 -21.6042,24.9234 -52.7314,52.70533 -98.9287,89.28571 -46.1973,36.58038 -156.0825,101.58463 -212.8571,128.5714 -57.066,27.1254 -128.2033,58.2385 -172.1428,72.5001 -43.9395,14.2616 -131.4286,31.0714 -131.4286,31.0714 L 1159.317,918.349 Z"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- inkscape:connector-curvature="0" />
- <path
- clip-path="url(#clipPath3992)"
- sodipodi:nodetypes="czczzcc"
- id="path8065"
- d="m 1241.5965,652.95007 c 0,0 -64.7215,54.33706 -145.6639,98.99494 -82.0244,45.25484 -284.25704,93.3381 -284.25704,93.3381 0,0 -15.10137,21.05196 45.25489,28.28428 60.35626,7.23232 224.08195,-53.30069 278.60015,-96.16654 54.5182,-42.86585 120.2081,-111.72286 120.2081,-111.72286 l -14.1422,-12.72792 z"
- style="display:inline;overflow:visible;visibility:visible;opacity:0.5;fill:url(#linearGradient3666);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter3779);enable-background:accumulate"
- transform="translate(450.03125,73.843964)"
- inkscape:connector-curvature="0" />
- <g
- clip-path="url(#clipPath3986)"
- id="g8067"
- style="display:inline;opacity:1;enable-background:new"
- transform="translate(450.03125,73.843964)">
- <g
- id="g8069"
- style="filter:url(#filter3677)"
- transform="translate(-174.03125,62.156036)">
- <g
- id="g8071"
- style="filter:url(#filter3785)">
- <path
- transform="translate(174.03125,-62.156036)"
- style="display:inline;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 1094.2857,725.93361 c 0,0 -0.2961,26.16091 4.6428,37.85715 4.9389,11.69624 20.0381,26.48665 28.5715,31.42857 8.5334,4.94192 18.9286,8.57142 18.9286,8.57142 l 117.8571,-115 17.8572,-75.71428 -96.4286,38.57143 -91.4286,74.28571 z"
- id="path8073"
- sodipodi:nodetypes="czzccccc"
- inkscape:connector-curvature="0" />
- <rect
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- id="rect8075"
- width="333.75412"
- height="309.71277"
- x="1197.8389"
- y="486.14224" />
- </g>
- </g>
- <g
- id="g8077"
- style="display:inline;opacity:0.18000004;enable-background:new"
- transform="translate(-174.03125,62.156036)">
- <g
- id="g8079"
- style="filter:url(#filter3785)">
- <path
- transform="translate(174.03125,-62.156036)"
- style="display:inline;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 1094.2857,725.93361 c 0,0 -0.2961,26.16091 4.6428,37.85715 4.9389,11.69624 20.0381,26.48665 28.5715,31.42857 8.5334,4.94192 18.9286,8.57142 18.9286,8.57142 l 117.8571,-115 17.8572,-75.71428 -96.4286,38.57143 -91.4286,74.28571 z"
- id="path8081"
- sodipodi:nodetypes="czzccccc"
- inkscape:connector-curvature="0" />
- <rect
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- id="rect8083"
- width="333.75412"
- height="309.71277"
- x="1197.8389"
- y="486.14224" />
- </g>
- </g>
- </g>
- <path
- sodipodi:nodetypes="cssssccccccssssssssccssssssccssssc"
- clip-path="url(#clipPath3722)"
- id="path8085"
- d="m 1264.1875,605 c -4.4911,0.73268 -8.157,3.45509 -11.9375,6.40625 -10.0813,7.86976 -28.1695,34.42524 -48.0312,50.46875 -39.8674,32.20316 -103.996,69.97701 -152.5626,91.09375 -48.614,21.13738 -130.54122,45.81801 -174.31245,57.5 -43.39821,11.58246 -115.04403,25.13107 -168.25,26.53125 l -4.5625,0.125 -2,4.125 -92.84375,192.125 -6.5,13.4688 14.65625,-2.8438 c 0,0 87.26968,-16.6514 132.34375,-31.2812 44.7252,-14.51667 115.79086,-45.66683 173.03125,-72.87505 C 980.82199,912.46306 1090.1551,847.86412 1137.5,810.375 c 46.3608,-36.70982 77.8049,-64.71682 99.9375,-90.25 10.9011,-12.576 22.7448,-27.53144 31.0313,-42.75 8.2864,-15.21856 19.1597,-44.21808 13.6874,-58.84375 -1.2177,-3.25474 -2.5514,-6.0613 -4.5937,-8.5 -2.0423,-2.4387 -8.4747,-1.57199 -8.5625,-5.03125 -0.2098,-8.26482 -3.3155,-0.24423 -4.8125,0 z m 2.1563,15.21875 c 0.4148,0.58574 1.0311,1.55766 1.7812,3.5625 2.8968,7.74213 -1.4407,31.89875 -8.8125,45.4375 -7.3718,13.53875 -22.6384,28.92394 -33.1875,41.09375 -21.0754,24.31356 -51.9037,51.86156 -97.9375,88.3125 -45.0496,35.67159 -155.46033,101.09459 -211.40625,127.6875 -56.89173,27.04249 -128.09616,58.1184 -171.25,72.125 -36.36491,11.8031 -95.84471,23.8338 -115.71875,27.7813 L 714.09375,851.75 c 54.70691,-2.0493 123.79259,-15.21635 167.125,-26.78125 44.33422,-11.83225 126.07865,-36.33633 176.40625,-58.21875 50.112,-21.78871 112.5344,-61.16816 154.0312,-94.6875 20.6464,-16.67721 41.7449,-42.54588 49.8126,-48.84375 2.437,-1.90242 4.0806,-2.6358 4.875,-3 z"
- style="display:inline;overflow:visible;visibility:visible;opacity:0.83300003;fill:#050505;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:15;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;filter:url(#filter8225);enable-background:accumulate"
- transform="translate(450.03125,73.843964)"
- inkscape:connector-curvature="0" />
- <g
- inkscape:transform-center-y="-12.859654"
- inkscape:transform-center-x="-185.09603"
- transform="matrix(0.9934486,0.1142802,-0.1142802,0.9934486,-9.24324,588.09054)"
- mask="url(#mask7704)"
- id="g8087"
- style="display:inline;opacity:1;enable-background:new">
- <path
- sodipodi:nodetypes="ccssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssscccccssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssssssssc"
- id="path8089"
- d="m 1111.4062,-285.9375 -3.9374,1.875 c -0.041,0.0102 -0.1,0.0205 -0.125,0.0312 -0.4188,0.21285 -0.1647,0.10058 -0.6563,0.3125 -0.4861,0.20956 -1.7376,0.58419 -4.0937,1.46875 -3.3312,1.25058 -5.8043,2.14984 -7,3.0625 -1.5362,0.0213 -3.7205,0.23331 -5.6563,0.71875 -2.9815,0.74767 -4.8552,1.17401 -6.75,1.59375 -1.8948,0.41973 -1.6755,0.64219 -2.875,0.875 -1.2966,0.25167 -1.7214,-0.009 -5.4375,0.78125 -3.4899,0.74215 -8.8948,1.93107 -10.1562,2.6875 -1.584,-0.18078 -3.8675,-0.32178 -5.8438,-0.0312 -3.0404,0.44696 -4.9162,0.67276 -6.8438,0.90625 -0.6554,0.0794 -1.041,0.20078 -1.3437,0.28125 -0.4262,0.13166 -0.6858,0.26002 -1.375,0.34375 -1.3116,0.15937 -1.7622,-0.15683 -5.5313,0.28125 -3.5539,0.41309 -9.0054,1.27282 -10.25,1.9375 -1.599,-0.29729 -3.8577,-0.53419 -5.8437,-0.34375 -3.0588,0.29332 -4.972,0.48399 -6.9063,0.65625 -1.9342,0.17227 -1.6886,0.42237 -2.9062,0.53125 -1.3162,0.1177 -1.7598,-0.16363 -5.5312,0.25 -3.5421,0.38845 -9.0079,1.20927 -10.2813,1.875 -1.5989,-0.29469 -3.8872,-0.50701 -5.875,-0.3125 -3.05829,0.29925 -4.9412,0.48024 -6.875,0.65625 -0.65749,0.0598 -1.04005,0.17856 -1.34375,0.25 -0.4277,0.11896 -0.6835,0.21807 -1.375,0.28125 -1.316,0.12026 -1.75975,-0.19488 -5.53125,0.21875 -3.55619,0.39002 -9.0056,1.23916 -10.25,1.90625 -1.59869,-0.29418 -3.85985,-0.52372 -5.84375,-0.3125 -3.0557,0.32533 -4.97405,0.52624 -6.90625,0.71875 -1.93219,0.19251 -1.68975,0.44088 -2.90625,0.5625 -1.31488,0.13147 -1.76305,-0.16454 -5.53125,0.28125 -3.53889,0.41866 -8.9777,1.29217 -10.25,1.96875 -1.59759,-0.28104 -3.85995,-0.42043 -5.84375,-0.1875 -3.05198,0.35837 -4.945,0.56786 -6.875,0.78125 -0.65618,0.0726 -1.04065,0.17269 -1.34375,0.25 -0.42679,0.12723 -0.6849,0.2672 -1.375,0.34375 -1.31339,0.14569 -1.76735,-0.17402 -5.53125,0.3125 -3.54888,0.45876 -8.97865,1.41902 -10.21875,2.125 -1.59309,-0.24424 -3.8338,-0.38135 -5.8125,-0.125 -3.04759,0.39482 -4.9507,0.64845 -6.875,0.90625 -1.92429,0.25779 -1.7261,0.49353 -2.9375,0.65625 -1.30949,0.1759 -1.7472,-0.10438 -5.5,0.46875 -3.52429,0.53824 -8.9232,1.69917 -10.1875,2.4375 -1.58749,-0.20354 -3.8455,-0.25473 -5.8125,0.0937 -3.02619,0.53612 -4.8989,0.86169 -6.8125,1.1875 -0.65059,0.11077 -1.0137,0.27094 -1.3125,0.375 -0.42069,0.16488 -0.66345,0.3313 -1.34375,0.46875 -1.2947,0.26159 -1.7271,-0.006 -5.4375,0.8125 -3.49848,0.77195 -8.8459,2.38293 -10.0625,3.21875 -1.5629,-0.0774 -3.7575,0.0853 -5.6875,0.59375 -2.97238,0.78313 -4.8177,1.23209 -6.6875,1.75 -1.87,0.5179 -1.66665,0.76728 -2.84375,1.09375 -1.27249,0.3529 -1.69705,0.10709 -5.34375,1.1875 -3.42468,1.01463 -8.6494,2.93317 -9.875,3.84375 -1.53878,0.0127 -3.7198,0.27222 -5.625,0.875 -2.93098,0.92734 -4.75035,1.45842 -6.59375,2.0625 -0.62679,0.20538 -0.99165,0.39258 -1.28125,0.53125 -0.40758,0.21361 -0.6533,0.40875 -1.3125,0.625 -1.2545,0.41154 -1.68615,0.18904 -5.28125,1.4375 -3.38989,1.17717 -8.59495,3.2137 -9.78125,4.15625 -1.52388,0.0597 -3.65005,0.39487 -5.53125,1.0625 -2.89739,1.02829 -4.69905,1.67548 -6.53125,2.3125 -1.8322,0.63701 -1.62785,0.84854 -2.78125,1.25 -1.24679,0.43396 -1.66355,0.19972 -5.21875,1.5625 -3.3387,1.2798 -8.4871,3.48255 -9.6875,4.46875 -1.50718,0.10769 -3.6357,0.4988 -5.5,1.21875 -2.86818,1.1076 -4.6239,1.78156 -6.4375,2.46875 -0.6167,0.23363 -0.99645,0.44203 -1.28125,0.59375 10e-6,0 0,0.0295 0,0.0312 l -8,3.1875 -12.4759,3.49189 7.92966,19.27772 c -0.59163,1.97357 12.54624,-4.73836 12.54624,-4.73836 0.22641,-0.14468 0.44895,-0.27261 0.71875,-0.375 1.08052,-0.40998 2.1716,-0.21577 6,-1.6875 3.82852,-1.47174 5.22405,-2.00498 5.90625,-2.40625 0.67961,-0.39978 1.61175,-0.87937 2.21875,-1.53125 1.82692,-0.13775 3.5708,-0.49323 4.9375,-1 2.968,-1.10052 4.87535,-1.80619 6.78125,-2.46875 1.90581,-0.66254 2.35415,-1.41487 3.40625,-1.78125 1.09162,-0.38011 2.1951,-0.16538 6.0625,-1.53125 3.8674,-1.36586 5.28315,-1.82708 5.96875,-2.21875 0.70111,-0.40052 1.7008,-0.93298 2.3125,-1.59375 1.97081,-0.0547 3.81695,-0.38463 5.28125,-0.875 3.00152,-1.00508 4.92615,-1.62171 6.84375,-2.25 1.53861,-0.5041 2.17415,-1.04677 2.90625,-1.4375 0.23022,-0.13431 0.4759,-0.25373 0.75,-0.34375 1.09832,-0.36048 2.18145,-0.0814 6.09375,-1.3125 3.91231,-1.23113 5.366,-1.67295 6.0625,-2.03125 0.69391,-0.35697 1.6301,-0.79261 2.25,-1.40625 1.86521,-0.0227 3.63585,-0.26683 5.03125,-0.6875 3.0304,-0.91354 4.9924,-1.4301 6.9375,-1.96875 1.94512,-0.53864 2.4262,-1.26452 3.5,-1.5625 1.11402,-0.30915 2.22,0.007 6.1875,-1.03125 3.9675,-1.03863 5.4175,-1.43273 6.125,-1.75 0.7348,-0.32959 1.8139,-0.75372 2.4375,-1.375 1.99782,0.116 3.85745,-0.0201 5.34375,-0.375 3.07811,-0.735 5.0834,-1.10094 7.0625,-1.5 1.58791,-0.32018 2.2443,-0.79055 3,-1.09375 0.23751,-0.1068 0.4669,-0.19276 0.75,-0.25 1.13341,-0.22919 2.30465,0.20893 6.34375,-0.5 4.03942,-0.70893 5.50025,-0.92709 6.21875,-1.1875 0.71581,-0.25944 1.70435,-0.56724 2.34375,-1.09375 1.9242,0.23949 3.7479,0.22453 5.1875,0 3.12642,-0.48762 5.15455,-0.70067 7.15625,-0.96875 2.00171,-0.26807 2.48875,-0.94514 3.59375,-1.09375 1.14642,-0.15418 2.27585,0.30157 6.34375,-0.21875 4.06781,-0.52032 5.56025,-0.69573 6.28125,-0.9375 0.73712,-0.24714 1.7981,-0.58623 2.4375,-1.125 2.05,0.33553 3.9737,0.39796 5.5,0.21875 3.1422,-0.36896 5.18,-0.55936 7.1875,-0.78125 1.61082,-0.17802 2.26465,-0.6082 3.03125,-0.84375 0.24091,-0.0855 0.49405,-0.1556 0.78125,-0.1875 1.1497,-0.12772 2.3013,0.34665 6.375,-0.125 4.0737,-0.47165 5.55905,-0.6106 6.28125,-0.84375 0.71941,-0.23227 1.70025,-0.47346 2.34375,-0.96875 1.9363,0.33346 3.77005,0.40424 5.21875,0.25 3.14601,-0.33495 5.1775,-0.51859 7.1875,-0.71875 2.00991,-0.20014 2.48415,-0.82639 3.59375,-0.9375 1.1511,-0.11528 2.2965,0.36506 6.375,-0.0625 4.0785,-0.42756 5.5889,-0.56209 6.3125,-0.78125 0.73922,-0.22386 1.7956,-0.51325 2.4375,-1.03125 2.057,0.39867 4.00185,0.4934 5.53125,0.34375 3.14871,-0.3081 5.1758,-0.47325 7.1875,-0.65625 1.61401,-0.14682 2.26305,-0.56055 3.03125,-0.78125 0.2413,-0.0809 0.49355,-0.12991 0.78125,-0.15625 1.15211,-0.10545 2.2929,0.39275 6.375,0 4.08211,-0.39275 5.5889,-0.53084 6.3125,-0.75 0.7209,-0.21833 1.6996,-0.4477 2.3437,-0.9375 1.9381,0.34999 3.7689,0.45438 5.2188,0.3125 3.1487,-0.3081 5.1758,-0.47325 7.1875,-0.65625 2.0116,-0.18299 2.5142,-0.83802 3.625,-0.9375 1.1523,-0.10323 2.2922,0.38483 6.375,0 4.0829,-0.38482 5.5887,-0.501 6.3125,-0.71875 0.7393,-0.22243 1.7956,-0.51449 2.4375,-1.03125 2.0574,0.40177 4.0029,0.50333 5.5313,0.34375 3.1465,-0.32852 5.177,-0.5227 7.1874,-0.71875 1.613,-0.15729 2.2657,-0.63148 3.0313,-0.875 0.2407,-0.088 0.4632,-0.12137 0.75,-0.15625 1.1483,-0.1397 2.3167,0.33991 6.375,-0.25 4.0583,-0.58992 5.5618,-0.77714 6.2813,-1.03125 0.7166,-0.25316 1.6746,-0.55807 2.3124,-1.09375 1.9197,0.21194 3.72,0.15141 5.1563,-0.0937 3.1191,-0.5324 5.1116,-0.92861 7.0937,-1.3125 1.9821,-0.38387 2.4743,-1.03965 3.5626,-1.28125 1.1287,-0.25066 2.2702,0.11629 6.25,-0.875 3.9795,-0.99127 5.4295,-1.4193 6.125,-1.78125 0.7222,-0.376 1.7617,-0.87058 2.375,-1.53125 1.9629,-0.012 3.7937,-0.29105 5.2187,-0.84375 2.9512,-1.1446 4.8732,-1.86942 6.6875,-2.75 1.4557,-0.70652 2.3191,-1.70203 2.5312,-2 0.2123,-0.29795 0.099,-0.72855 0.125,-0.75 0.043,-0.0352 0.3404,-0.094 0.5,-0.4375 0.859,-1.84707 2.3232,-5.62764 2.4376,-6.3125 0.1137,-0.68214 0.168,-1.35277 0.2187,-1.75 0.029,-0.2295 -0.1471,-0.8789 -0.125,-0.9375 0.031,-0.082 0.2883,-0.25057 0.3437,-0.5 0.2663,-1.19831 0.089,-2.20736 -0.125,-3.625 -0.2139,-1.41763 -0.9716,-4.61463 -1.625,-5.46875 -0.6589,-0.86172 -1.2248,-1.01051 -1.75,-1 z"
- style="display:inline;fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- transform="translate(0.08004571,-0.03125)"
- inkscape:connector-curvature="0" />
- <g
- id="g8091"
- clip-path="url(#clipPath7421)">
- <path
- sodipodi:nodetypes="czscsssscssssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssccsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscc"
- style="display:inline;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter7001);enable-background:new"
- d="m 1107.409,-284.04961 c -0.4187,0.21283 -0.1556,0.0939 -0.6472,0.30581 -0.4861,0.20954 -1.7234,0.57439 -4.0796,1.45895 -3.3311,1.25057 -5.8302,2.15344 -7.0259,3.0661 -1.5361,0.0213 -3.7205,0.23331 -5.6563,0.71875 -2.9815,0.74766 -4.8552,1.17401 -6.75,1.59375 -1.8948,0.41972 -1.6755,0.64219 -2.875,0.875 -1.2966,0.25166 -1.7214,-0.009 -5.4375,0.78125 -3.4899,0.74214 -8.8948,1.93107 -10.1562,2.6875 -1.5839,-0.18079 -3.8675,-0.32178 -5.8438,-0.0312 -3.0404,0.44695 -4.9162,0.67276 -6.8437,0.90625 -0.6554,0.0794 -1.0411,0.20078 -1.3438,0.28125 -0.4262,0.13165 -0.6858,0.26002 -1.375,0.34375 -1.3116,0.15936 -1.7622,-0.15683 -5.5312,0.28125 -3.5539,0.41308 -9.0054,1.27282 -10.25,1.9375 -1.599,-0.2973 -3.8578,-0.53419 -5.8438,-0.34375 -3.0588,0.29331 -4.972,0.48399 -6.9062,0.65625 -1.9343,0.17226 -1.6887,0.42237 -2.9063,0.53125 -1.3162,0.11769 -1.7598,-0.16363 -5.5312,0.25 -3.5419,0.38844 -9.0079,1.20927 -10.2813,1.875 -1.5989,-0.2947 -3.88717,-0.50701 -5.875,-0.3125 -3.05824,0.29924 -4.94113,0.48024 -6.875,0.65625 -0.65749,0.0598 -1.04004,0.17856 -1.34375,0.25 -0.42765,0.11895 -0.68351,0.21807 -1.375,0.28125 -1.31596,0.12025 -1.75976,-0.19488 -5.53125,0.21875 -3.55614,0.39001 -9.00554,1.23916 -10.25,1.90625 -1.59863,-0.29419 -3.85984,-0.52372 -5.84375,-0.3125 -3.0556,0.32532 -4.97404,0.52624 -6.90625,0.71875 -1.93221,0.1925 -1.68987,0.44088 -2.90625,0.5625 -1.31488,0.13146 -1.76298,-0.16454 -5.53125,0.28125 -3.53887,0.41865 -8.97768,1.29217 -10.25,1.96875 -1.59755,-0.28105 -3.85996,-0.42043 -5.84375,-0.1875 -3.05198,0.35836 -4.94508,0.56786 -6.875,0.78125 -0.6562,0.0725 -1.04066,0.17269 -1.34375,0.25 -0.42677,0.12722 -0.68491,0.2672 -1.375,0.34375 -1.31333,0.14568 -1.76746,-0.17402 -5.53125,0.3125 -3.54889,0.45875 -8.97863,1.41902 -10.21875,2.125 -1.59305,-0.24424 -3.83381,-0.38135 -5.8125,-0.125 -3.04759,0.39481 -4.95071,0.64845 -6.875,0.90625 -1.92428,0.25779 -1.72611,0.49353 -2.9375,0.65625 -1.30946,0.1759 -1.74719,-0.10438 -5.5,0.46875 -3.52429,0.53824 -8.92315,1.69917 -10.1875,2.4375 -1.5875,-0.20354 -3.8455,-0.25473 -5.8125,0.0937 -3.02617,0.53612 -4.89889,0.86169 -6.8125,1.1875 -0.65061,0.11077 -1.01371,0.27094 -1.3125,0.375 -0.42067,0.16488 -0.66345,0.3313 -1.34375,0.46875 -1.29465,0.26159 -1.72712,-0.006 -5.4375,0.8125 -3.49853,0.77195 -8.84595,2.38293 -10.0625,3.21875 -1.56278,-0.0774 -3.75758,0.0853 -5.6875,0.59375 -2.97244,0.78313 -4.81761,1.23209 -6.6875,1.75 -1.86988,0.5179 -1.6666,0.76728 -2.84375,1.09375 -1.27246,0.3529 -1.69703,0.10709 -5.34375,1.1875 -3.4247,1.01463 -8.64944,2.93317 -9.875,3.84375 -1.53883,0.0127 -3.71983,0.27222 -5.625,0.875 -2.93106,0.92734 -4.75031,1.45842 -6.59375,2.0625 -0.62676,0.20538 -0.99173,0.39258 -1.28125,0.53125 -0.40763,0.21361 -0.65334,0.40875 -1.3125,0.625 -1.25446,0.41154 -1.68611,0.18904 -5.28125,1.4375 -3.38985,1.17717 -8.59498,3.2137 -9.78125,4.15625 -1.52389,0.0597 -3.65005,0.39487 -5.53125,1.0625 -2.89739,1.02829 -4.69908,1.67548 -6.53125,2.3125 -1.83217,0.63701 -1.62785,0.84854 -2.78125,1.25 -1.24678,0.43396 -1.66361,0.19972 -5.21875,1.5625 -3.33867,1.2798 -8.48715,3.48255 -9.6875,4.46875 -1.50718,0.10769 -3.63569,0.4988 -5.5,1.21875 -2.86818,1.1076 -4.6238,1.78156 -6.4375,2.46875 -0.61666,0.23363 -0.99641,0.44203 -1.28125,0.59375 0,0 0,1.09375 0,1.09375 0.11178,-0.22236 0.38599,-0.81743 0.90625,-1.09375 0.69797,-0.37072 4.81363,-1.99337 6.8125,-2.71875 1.65686,-0.60125 4.15389,-1.32868 5.96875,-1.3125 0.30162,0.003 0.58762,0.0509 0.84375,0.0937 1.84249,0.30825 7.46875,1.5625 7.46875,1.5625 -10e-6,0 -6.23349,-1.64675 -7.03125,-1.84375 -0.19079,-0.0471 -0.53572,-0.0687 -0.96875,-0.0625 1.14546,-0.86971 4.761,-2.39351 7.34375,-3.4375 2.83822,-1.14727 3.11681,-1.25182 5.0625,-1.65625 2.0083,-0.41744 3.15625,-0.5 3.15625,-0.5 0,10e-6 -0.0824,-0.60114 0.96875,-1.125 0.7051,-0.35141 4.88702,-1.8924 6.90625,-2.5625 1.9519,-0.64773 5.0574,-1.3585 6.875,-1 1.86323,0.3675 7.53125,1.8125 7.53125,1.8125 10e-6,0 -6.287,-1.87111 -7.09375,-2.09375 -0.19292,-0.0532 -0.53084,-0.086 -0.96875,-0.0937 1.15834,-0.83288 4.79444,-2.19532 7.40625,-3.15625 2.87016,-1.05601 3.16734,-1.1618 5.125,-1.53125 1.85349,-0.34979 2.85884,-0.42548 3.03125,-0.4375 0.1136,-0.21724 0.37745,-0.81002 0.90625,-1.0625 0.70944,-0.33874 4.92607,-1.71275 6.96875,-2.3125 1.69317,-0.49711 4.24077,-1.03677 6.09375,-0.90625 0.30795,0.0217 0.61349,0.0973 0.875,0.15625 1.88118,0.42432 7.59375,2.03125 7.59375,2.03125 10e-6,0 -6.34174,-2.06525 -7.15625,-2.3125 -0.19479,-0.0591 -0.55788,-0.10394 -1,-0.125 1.16949,-0.79755 4.86302,-2.05622 7.5,-2.9375 2.89781,-0.96847 3.23301,-1.00332 5.21875,-1.28125 2.04965,-0.28689 3.1875,-0.3125 3.1875,-0.3125 -2e-5,0 -0.0728,-0.60697 1,-1.0625 0.7196,-0.30557 4.99098,-1.50075 7.0625,-2 2.00244,-0.48258 5.19849,-0.92829 7.0625,-0.40625 1.91078,0.53515 7.71875,2.5 7.71875,2.5 0,0 -6.42266,-2.42351 -7.25,-2.71875 -0.19784,-0.0706 -0.58216,-0.14039 -1.03125,-0.1875 1.1879,-0.72865 4.91527,-1.77408 7.59375,-2.5 2.94342,-0.79775 3.29208,-0.77083 5.3125,-0.90625 1.91289,-0.12823 2.94705,-0.0711 3.125,-0.0625 0.11728,-0.20366 0.39176,-0.77948 0.9375,-0.96875 0.73219,-0.25394 5.07852,-1.04789 7.1875,-1.375 1.74813,-0.27111 4.40088,-0.4847 6.3125,-0.0937 0.31766,0.065 0.60522,0.18551 0.875,0.28125 1.94074,0.68873 7.84375,3.09375 7.84375,3.09375 10e-6,0 -6.53471,-2.95077 -7.375,-3.3125 -0.20097,-0.0865 -0.57513,-0.16679 -1.03125,-0.25 1.2065,-0.63318 5.02956,-1.3956 7.75,-1.90625 2.98953,-0.56119 3.30023,-0.52954 5.34375,-0.53125 2.10926,-0.002 3.3125,0.125 3.3125,0.125 0,1e-5 -0.0727,-0.63119 1.03125,-0.9375 0.74052,-0.20547 5.12612,-0.83387 7.25,-1.0625 2.05302,-0.22099 5.31863,-0.25222 7.21875,0.46875 1.94779,0.73907 7.84375,3.375 7.84375,3.375 2e-5,0 -6.56288,-3.17897 -7.40625,-3.5625 -0.20168,-0.0917 -0.54221,-0.18621 -1,-0.28125 1.21092,-0.60188 4.98442,-1.24884 7.71875,-1.65625 3.0048,-0.44772 3.32551,-0.4517 5.375,-0.40625 1.94045,0.043 3.00699,0.19423 3.1875,0.21875 0.11892,-0.19316 0.3839,-0.76583 0.9375,-0.90625 0.74271,-0.18838 5.15429,-0.73428 7.28125,-0.9375 1.76303,-0.16842 4.42009,-0.23429 6.34375,0.25 0.31968,0.0805 0.60351,0.20359 0.875,0.3125 1.95293,0.78349 7.90625,3.46875 7.90625,3.46875 -2e-5,0 -6.59191,-3.25348 -7.4375,-3.65625 -0.20222,-0.0963 -0.57226,-0.20703 -1.03125,-0.3125 1.21414,-0.57427 5.04366,-1.12219 7.78125,-1.5 3.00838,-0.4152 3.32307,-0.44263 5.375,-0.375 2.11798,0.0698 3.3125,0.25 3.3125,0.25 -2e-5,0 -0.0773,-0.63741 1.03125,-0.90625 0.74362,-0.18035 5.15176,-0.66355 7.28125,-0.84375 2.05847,-0.17417 5.34324,-0.12432 7.25,0.65625 1.95459,0.80016 7.875,3.53125 7.875,3.53125 -2e-5,0 -6.55993,-3.30876 -7.40625,-3.71875 -0.20237,-0.0981 -0.57186,-0.2031 -1.03125,-0.3125 1.21517,-0.5639 5.01008,-1.1143 7.75,-1.46875 3.01091,-0.38952 3.32131,-0.39765 5.375,-0.3125 1.94439,0.0806 3.00663,0.25324 3.1875,0.28125 0.11916,-0.19086 0.38277,-0.74531 0.9375,-0.875 0.74426,-0.174 5.14993,-0.65047 7.28125,-0.8125 1.76662,-0.13427 4.4497,-0.12571 6.375,0.375 0.32,0.0832 0.6033,0.20127 0.875,0.3125 1.9546,0.80016 7.9063,3.5625 7.9063,3.5625 -10e-5,0 -6.5912,-3.34001 -7.4375,-3.75 -0.2024,-0.0981 -0.5719,-0.20311 -1.0313,-0.3125 1.2151,-0.5639 5.0413,-1.08306 7.7813,-1.4375 3.0109,-0.38953 3.3525,-0.4289 5.4062,-0.34375 2.1197,0.0879 3.3125,0.3125 3.3125,0.3125 0,0 -0.078,-0.64902 1.0313,-0.90625 0.7443,-0.17256 5.1495,-0.62336 7.2812,-0.78125 2.0606,-0.1526 5.3429,-0.0968 7.25,0.6875 1.955,0.80395 7.875,3.5 7.875,3.5 0,0 -6.5598,-3.27587 -7.4062,-3.6875 -0.2025,-0.0984 -0.5718,-0.20222 -1.0313,-0.3125 1.2154,-0.56154 5.0119,-1.12778 7.75,-1.5 3.009,-0.40905 3.3227,-0.41558 5.375,-0.34375 1.9431,0.068 3.0072,0.16485 3.1875,0.1875 0.1188,-0.1944 0.3846,-0.72881 0.9375,-0.875 0.7418,-0.19612 5.1311,-0.82878 7.25,-1.09375 1.7564,-0.21961 4.4053,-0.33231 6.3125,0.0312 0.3169,0.0604 0.6058,0.18938 0.875,0.28125 1.9362,0.66092 7.8438,2.9375 7.8438,2.9375 -1e-4,0 -6.5367,-2.80655 -7.375,-3.15625 -0.2005,-0.0836 -0.5762,-0.17333 -1.0313,-0.25 1.2037,-0.65046 5.0191,-1.37195 7.7188,-2 2.9667,-0.6902 3.2889,-0.75507 5.3125,-0.875 2.0886,-0.1238 3.2812,-0.0312 3.2812,-0.0312 0,1e-5 -0.087,-0.63205 1,-1.03125 0.7292,-0.2678 5.0472,-1.33797 7.125,-1.8125 2.0085,-0.45869 5.1679,-1.0293 7,-0.625 1.8781,0.41446 13.5782,3.01563 13.5782,3.01563 0,0 -12.3275,-3.02266 -13.1407,-3.26563 -0.1945,-0.0581 -0.5586,-0.10626 -1,-0.125 1.1676,-0.80369 3.5142,-1.6873 6.1094,-2.70312 1.6814,-0.65818 0.9237,-0.37659 2.7759,-1.0036 1.7536,-0.59366 2.4854,-1.01071 2.6304,-1.11299 0.3461,-0.20651 -0.356,-0.12188 -0.5442,-0.0424 z"
- id="path8093"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter6949);enable-background:new"
- d="m 1082.625,-275.125 c 1.873,0.39348 4.4961,1.14555 6.0313,1.96875 1.5352,0.82319 2.8222,1.056 5.375,2.5 2.5266,1.42926 4.7958,2.00696 6.9687,2.53125 2.3476,0.56642 5.4354,0.71523 8.8438,1.1875 -1.0889,-0.83975 -6.6074,-1.17245 -8.4063,-1.5625 -1.7989,-0.39006 -3.8941,-1.01616 -6.5937,-2.3125 -2.6997,-1.29634 -3.4944,-1.79896 -5.8125,-2.6875 -2.3182,-0.88854 -4.0044,-1.38314 -6.4063,-1.625 z"
- id="path8095"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter6961);enable-background:new"
- d="m 1051.4688,-270 c 1.9053,0.57759 4.5281,1.61572 6.0937,2.59375 1.5656,0.97802 2.8802,1.35981 5.5,3.125 2.593,1.74716 4.9859,2.70927 7.25,3.59375 2.4461,0.95557 5.6826,1.65713 9.4063,3.0625 -1.1896,-1.13784 -7.0631,-2.68675 -8.9375,-3.375 -1.8745,-0.68825 -4.0818,-1.5662 -6.875,-3.28125 -2.7933,-1.71504 -3.5736,-2.2839 -5.9375,-3.40625 -2.3641,-1.12234 -4.0567,-1.83455 -6.5,-2.3125 z"
- id="path8097"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter6957);enable-background:new"
- d="m 1020.2188,-266.84375 c 1.9119,0.63811 4.5812,1.75536 6.1562,2.8125 1.5751,1.05715 2.8956,1.50867 5.5313,3.40625 2.6086,1.87821 5.0284,3.03003 7.3125,4.0625 2.4677,1.11545 5.7645,2.1733 9.5312,3.84375 -1.2033,-1.22253 -7.2028,-3.31423 -9.0937,-4.125 -1.891,-0.81077 -4.0649,-1.89379 -6.875,-3.75 -2.8102,-1.8562 -3.6218,-2.47693 -6,-3.71875 -2.3783,-1.2418 -4.1107,-1.97569 -6.5625,-2.53125 z"
- id="path8099"
- inkscape:connector-curvature="0" />
- <path
- sodipodi:nodetypes="cssscscsscsssccscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssccscsscscssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsszsszssszzcczzzczzzc"
- style="display:inline;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter6997);enable-background:new"
- d="m 1110.1719,-266.89063 c 0.1508,0.0486 0.688,0.631 0.1094,1.48438 -0.8101,1.19459 -5.7049,3.32429 -8.5625,4.125 -2.8449,0.79712 -6.2901,0.97774 -10.5625,-0.375 -4.3016,-1.36195 -5.4697,-2.46872 -10.6563,-4.3125 4.664,2.11517 6.1953,3.95233 10.125,5.34375 1.6207,0.57387 3.3671,0.9396 5.0625,1.03125 -0.4451,0.32563 -1.5303,0.9833 -3.5625,1.59375 -2.7955,0.83969 -6.6491,1.53378 -8.25,1.625 -1.5146,0.0863 -3.142,-0.51249 -3.4375,-0.625 0.1667,0.10308 0.3732,0.37734 -0.25,1.03125 -0.8993,0.94363 -6.1474,1.923 -9.125,2.25 -2.9643,0.32555 -6.5216,-0.016 -10.9062,-1.90625 -3.978,-1.71497 -5.339,-2.91536 -9.4063,-4.75 0,0 0,0.15625 0,0.15625 3.6431,2.09529 5.284,3.88327 8.875,5.5625 1.7302,0.80909 3.5917,1.40876 5.4063,1.71875 -0.5349,0.28676 -1.5578,0.71151 -3.4375,1.03125 -2.869,0.48796 -6.809,0.81614 -8.4375,0.75 -0.8507,-0.0345 -1.7286,-0.18437 -2.4063,-0.40625 -0.6848,-0.21488 -1.1897,-0.44467 -1.3125,-0.5 0.1694,0.10721 0.4311,0.40288 -0.2187,1.03125 -0.9097,0.87962 -6.2461,1.33638 -9.25,1.46875 -2.9905,0.13179 -6.5889,-0.45063 -11,-2.5625 -4.4412,-2.12626 -5.6415,-3.4016 -10.9063,-5.78125 4.7343,2.59704 6.2865,4.6291 10.3438,6.71875 1.6733,0.86185 3.4852,1.49425 5.25,1.9375 -0.4633,0.23332 -1.5894,0.68814 -3.6875,0.9375 -2.8863,0.34298 -6.8346,0.49288 -8.4688,0.375 -1.5462,-0.1115 -3.2312,-0.85696 -3.5312,-1 0.1691,0.12029 0.4138,0.41048 -0.2188,1 -0.9128,0.85073 -6.2441,1.26212 -9.25,1.375 -2.9925,0.11237 -6.5897,-0.49043 -11,-2.59375 -4.00125,-1.90823 -5.38803,-3.13783 -9.46875,-5.09375 -3e-5,0 0,0.15625 0,0.15625 3.65506,2.20392 5.29421,4.05255 8.90625,5.90625 1.74029,0.89315 3.637,1.52827 5.4688,1.96875 -0.54,0.2483 -1.5781,0.61533 -3.4688,0.84375 -2.88568,0.34858 -6.86605,0.52095 -8.5,0.40625 -0.85345,-0.0599 -1.72631,-0.25791 -2.40625,-0.5 -0.6871,-0.2353 -1.18935,-0.47226 -1.3125,-0.53125 0.16998,0.11227 0.46448,0.42225 -0.1875,1.03125 -0.91265,0.8525 -6.27533,1.29337 -9.28125,1.40625 -2.99246,0.11237 -6.59346,-0.52805 -11,-2.59375 -4.43653,-2.07978 -5.64688,-3.33171 -10.90625,-5.65625 4.72938,2.54749 6.29074,4.5778 10.34375,6.625 1.67155,0.84433 3.48554,1.46643 5.25,1.90625 -0.46323,0.23422 -1.5897,0.68407 -3.6875,0.9375 -2.88569,0.34858 -6.8362,0.56952 -8.46875,0.46875 -1.54456,-0.0953 -3.20031,-0.82885 -3.5,-0.96875 0.16899,0.11853 0.38192,0.40385 -0.25,1 -0.91186,0.86028 -6.24665,1.33025 -9.25,1.46875 -2.98995,0.1379 -6.56745,-0.45068 -10.96875,-2.46875 -3.99308,-1.83089 -5.36511,-3.0292 -9.4375,-4.90625 -2e-5,0 0,0.15625 0,0.15625 3.64761,2.13327 5.27033,3.93487 8.875,5.71875 1.73675,0.85951 3.60727,1.45014 5.4375,1.875 -0.53947,0.2529 -1.55063,0.64129 -3.4375,0.90625 -2.87978,0.40436 -6.83813,0.64562 -8.46875,0.5625 -0.85172,-0.0434 -1.7277,-0.20855 -2.40625,-0.4375 -0.68569,-0.22201 -1.1896,-0.44339 -1.3125,-0.5 0.16959,0.10899 0.4319,0.40965 -0.21875,1.03125 -0.91079,0.87014 -6.25021,1.39152 -9.25,1.5625 -2.98633,0.17021 -6.57381,-0.31577 -10.96875,-2.28125 -4.42489,-1.97888 -5.60596,-3.22819 -10.84375,-5.375 4.70997,2.38767 6.27017,4.38873 10.3125,6.34375 1.66715,0.80631 3.46043,1.39658 5.21875,1.78125 -0.46163,0.2487 -1.597,0.71225 -3.6875,1.03125 -2.8756,0.43876 -6.7804,0.7331 -8.40625,0.6875 -1.53823,-0.0431 -3.2328,-0.74522 -3.53125,-0.875 0.16833,0.11282 0.41057,0.41375 -0.21875,1.03125 -0.90812,0.8911 -6.20295,1.52825 -9.1875,1.8125 -2.97118,0.28298 -6.57342,-0.1758 -10.9375,-1.9375 -3.95934,-1.59831 -5.32915,-2.79487 -9.34375,-4.3125 3e-5,0 0,0.15625 0,0.15625 3.5959,1.81135 5.23831,3.58233 8.8125,5.15625 1.72207,0.75835 3.58748,1.28895 5.40625,1.625 -0.53609,0.27908 -1.56658,0.68763 -3.4375,1.0625 -2.85539,0.5721 -6.78942,1.01939 -8.40625,1.03125 -0.84451,0.006 -1.70608,-0.0809 -2.375,-0.25 -0.67591,-0.16151 -1.16009,-0.32923 -1.28125,-0.375 0.16722,0.094 0.42267,0.38348 -0.21875,1.0625 -0.89787,0.95052 -6.18648,1.91708 -9.125,2.4375 -2.92534,0.51809 -6.43215,0.37424 -10.71875,-1.03125 -4.3158,-1.41507 -5.47277,-2.52994 -10.5625,-3.96875 4.57685,1.75101 6.08855,3.56006 10.03125,5 1.62608,0.59389 3.36885,0.95565 5.09375,1.15625 -0.45285,0.29702 -1.55478,0.88339 -3.59375,1.46875 -2.80472,0.80517 -6.63886,1.57583 -8.21875,1.75 -1.49475,0.1648 -3.11623,-0.31681 -3.40625,-0.40625 0.16356,0.0901 0.39278,0.35993 -0.21875,1.0625 -0.88247,1.01385 -6.04452,2.37165 -8.9375,3.0625 -2.88002,0.68778 -6.3356,0.76002 -10.5625,-0.4375 -3.83485,-1.08645 -5.17258,-2.07237 -9.0625,-3.125 -10e-6,0 0,0.15625 0,0.15625 3.48418,1.39485 5.06941,2.9194 8.53125,4.03125 1.66793,0.53572 3.45578,0.78674 5.21875,0.875 -0.51964,0.35212 -1.50039,0.91452 -3.3125,1.53125 -2.76566,0.94125 -6.59024,1.93537 -8.15625,2.15625 -0.81794,0.11539 -1.6331,0.12283 -2.28125,0.0312 -0.65496,-0.0832 -1.1326,-0.21827 -1.25,-0.25 0.16204,0.0746 0.43399,0.34044 -0.1875,1.09375 -0.87,1.05453 -6.00963,2.65925 -8.875,3.4375 -2.85253,0.77476 -6.25912,0.9582 -10.4375,-0.0937 -4.20683,-1.05913 -5.35669,-2.04166 -10.34375,-3.15625 4.48454,1.45946 5.96935,3.13523 9.8125,4.25 1.58504,0.45977 3.28679,0.63825 4.96875,0.6875 -0.44157,0.33676 -1.51251,1.02773 -3.5,1.78125 -2.73393,1.03649 -6.45198,2.16269 -8,2.4375 -1.46462,0.26002 -3.05958,-0.11654 -3.34375,-0.1875 0.16025,0.0796 0.38044,0.32098 -0.21875,1.0625 -0.86466,1.07006 -5.91652,2.81815 -8.75,3.6875 -2.8208,0.86547 -6.2075,1.15631 -10.34375,0.21875 -3.75259,-0.85061 -5.04785,-1.71647 -8.875,-2.59375 0,0 0,0.15625 0,0.15625 3.42796,1.23779 4.98741,2.6323 8.375,3.53125 1.63216,0.43314 3.36704,0.58301 5.09375,0.5625 -0.50893,0.38417 -1.47675,1.02182 -3.25,1.75 -2.70634,1.11134 -6.43633,2.30781 -7.96875,2.625 -0.8004,0.16569 -1.61231,0.21862 -2.25,0.15625 0,0 0,0.51552 0,0.92229 0,0.26507 0,0.48396 0,0.48396 0.22645,-0.14468 0.44891,-0.27261 0.71875,-0.375 1.08052,-0.40998 2.17161,-0.21577 6,-1.6875 3.82843,-1.47174 5.22412,-2.00498 5.90625,-2.40625 0.6796,-0.39978 1.61165,-0.87937 2.21875,-1.53125 1.82685,-0.13775 3.57075,-0.49323 4.9375,-1 2.96812,-1.10052 4.87537,-1.80619 6.78125,-2.46875 1.90586,-0.66254 2.35409,-1.41487 3.40625,-1.78125 1.09155,-0.38011 2.19511,-0.16538 6.0625,-1.53125 3.86745,-1.36586 5.28316,-1.82708 5.96875,-2.21875 0.70109,-0.40052 1.70081,-0.93298 2.3125,-1.59375 1.9708,-0.0547 3.81685,-0.38463 5.28125,-0.875 3.00148,-1.00508 4.92615,-1.62171 6.84375,-2.25 1.5386,-0.5041 2.17402,-1.04677 2.90625,-1.4375 0.23016,-0.13431 0.47574,-0.25373 0.75,-0.34375 1.09823,-0.36048 2.18145,-0.0814 6.09375,-1.3125 3.91233,-1.23113 5.36605,-1.67295 6.0625,-2.03125 0.69388,-0.35697 1.63015,-0.79261 2.25,-1.40625 1.86521,-0.0227 3.63581,-0.26683 5.03125,-0.6875 3.03043,-0.91354 4.99238,-1.4301 6.9375,-1.96875 1.94511,-0.53864 2.42618,-1.26452 3.5,-1.5625 1.11401,-0.30915 2.21994,0.007 6.1875,-1.03125 3.96761,-1.03863 5.41758,-1.43273 6.125,-1.75 0.73487,-0.32959 1.81383,-0.75372 2.4375,-1.375 1.99774,0.116 3.85743,-0.0201 5.34375,-0.375 3.07811,-0.735 5.08344,-1.10094 7.0625,-1.5 1.58792,-0.32018 2.24429,-0.79055 3,-1.09375 0.23757,-0.1068 0.46695,-0.19276 0.75,-0.25 1.13347,-0.22919 2.30448,0.20893 6.34375,-0.5 4.03933,-0.70893 5.50025,-0.92709 6.21875,-1.1875 0.71586,-0.25944 1.70428,-0.56724 2.34375,-1.09375 1.92427,0.23949 3.74788,0.22453 5.1875,0 3.12633,-0.48762 5.15455,-0.70067 7.15625,-0.96875 2.00171,-0.26807 2.48869,-0.94514 3.59375,-1.09375 1.14639,-0.15418 2.27592,0.30157 6.34375,-0.21875 4.06784,-0.52032 5.56013,-0.69573 6.28125,-0.9375 0.7371,-0.24714 1.79809,-0.58623 2.4375,-1.125 2.05007,0.33553 3.97378,0.39796 5.5,0.21875 3.14231,-0.36896 5.17994,-0.55936 7.1875,-0.78125 1.61076,-0.17802 2.26467,-0.6082 3.03125,-0.84375 0.24094,-0.0855 0.49412,-0.1556 0.78125,-0.1875 1.14978,-0.12772 2.30129,0.34665 6.375,-0.125 4.07374,-0.47165 5.55909,-0.6106 6.28125,-0.84375 0.71946,-0.23227 1.70024,-0.47346 2.34375,-0.96875 1.93637,0.33346 3.77006,0.40424 5.21875,0.25 3.14602,-0.33495 5.17756,-0.51859 7.1875,-0.71875 2.00996,-0.20014 2.48414,-0.82639 3.59375,-0.9375 1.15114,-0.11528 2.29643,0.36506 6.375,-0.0625 4.07861,-0.42756 5.58886,-0.56209 6.3125,-0.78125 0.73915,-0.22386 1.79572,-0.51325 2.4375,-1.03125 2.0571,0.39867 4.00187,0.4934 5.53125,0.34375 3.14873,-0.3081 5.17584,-0.47325 7.1875,-0.65625 1.61407,-0.14682 2.2631,-0.56055 3.03125,-0.78125 0.24142,-0.0809 0.49353,-0.12991 0.78125,-0.15625 1.15211,-0.10545 2.29296,0.39275 6.375,0 4.08208,-0.39275 5.5889,-0.53084 6.3125,-0.75 0.7209,-0.21833 1.6997,-0.4477 2.3438,-0.9375 1.938,0.34999 3.7688,0.45438 5.2187,0.3125 3.1487,-0.3081 5.1758,-0.47325 7.1875,-0.65625 2.0116,-0.18299 2.5142,-0.83802 3.625,-0.9375 1.1523,-0.10323 2.2922,0.38483 6.375,0 4.0829,-0.38482 5.5887,-0.501 6.3125,-0.71875 0.7393,-0.22243 1.7956,-0.51449 2.4375,-1.03125 2.0574,0.40177 4.0029,0.50333 5.5313,0.34375 3.1466,-0.32852 5.1771,-0.5227 7.1875,-0.71875 1.613,-0.15729 2.2656,-0.63148 3.0312,-0.875 0.2407,-0.088 0.4632,-0.12137 0.75,-0.15625 1.1483,-0.1397 2.3167,0.33991 6.375,-0.25 4.0583,-0.58992 5.5618,-0.77714 6.2813,-1.03125 0.7167,-0.25316 1.6745,-0.55807 2.3125,-1.09375 1.9197,0.21194 3.7199,0.15141 5.1562,-0.0937 3.1191,-0.5324 5.1116,-0.92861 7.0938,-1.3125 1.9821,-0.38387 2.4743,-1.03965 3.5625,-1.28125 1.1288,-0.25066 2.2703,0.11629 6.25,-0.875 3.9796,-0.99128 5.4296,-1.4193 6.125,-1.78125 0.7223,-0.37601 1.7619,-0.87058 2.375,-1.53125 1.963,-0.012 3.7937,-0.29105 5.2187,-0.84375 2.9512,-1.14461 4.8732,-1.86942 6.6875,-2.75 1.4557,-0.70653 2.3348,-1.68641 2.5469,-1.98438 0.2122,-0.29796 0.1118,-0.7453 0.1379,-0.76675 0.043,-0.0352 0.3193,-0.085 0.479,-0.42844 0.8589,-1.84708 2.321,-5.64459 2.4352,-6.32945 0.1137,-0.68216 0.1638,-1.34774 0.2145,-1.74497 0.029,-0.22952 -0.1467,-0.86544 -0.1246,-0.92404 0.031,-0.0821 0.3045,-0.26528 0.3599,-0.51471 0.2663,-1.19833 0.089,-2.19129 -0.1251,-3.60893 -0.214,-1.41764 -0.9837,-4.62214 -1.6369,-5.47626 -0.6589,-0.86172 -1.2229,-1.01117 -1.7479,-1.00066 -0.2086,0.26976 0.1368,0.26309 0.1626,0.31261 0.6806,0.0508 0.934,0.36864 1.4192,0.89662 0.4852,0.52798 1.4428,3.93956 1.5794,5.38995 0.1366,1.45039 0.19,2.8602 -0.088,3.46864 -0.2781,0.60845 -0.9442,0.42864 -1.2366,0.49452 0.531,0.18589 0.8908,0.21322 0.9524,1.05768 0.059,0.81338 -0.1332,1.63969 -0.5198,2.80562 -0.3912,1.18001 -1.8452,4.34998 -2.2857,4.59877 -0.4523,0.25551 -0.9524,0.18199 -1.288,0.0511 z"
- id="path8101"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter6953);enable-background:new"
- d="m 988.75,-263.84375 c 1.91161,0.6344 4.55027,1.75841 6.125,2.8125 1.57477,1.05409 2.8961,1.48252 5.5313,3.375 2.6082,1.87314 5.0269,3.01522 7.3125,4.0625 2.4693,1.13147 5.7521,2.15474 9.5312,3.9375 -1.2072,-1.2584 -7.139,-3.36445 -9.0312,-4.1875 -1.8922,-0.82304 -4.128,-1.93049 -6.9375,-3.78125 -2.80961,-1.85075 -3.62224,-2.48154 -6.00005,-3.71875 -2.37782,-1.23719 -4.07988,-1.9492 -6.53125,-2.5 z"
- id="path8103"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter6993);enable-background:new"
- d="m 957.5,-260.78125 c 1.91,0.6181 4.58288,1.70934 6.15625,2.75 1.57339,1.04066 2.89608,1.48252 5.53125,3.375 2.60823,1.87315 5.02692,3.01521 7.3125,4.0625 2.46931,1.13147 5.75213,2.15475 9.53125,3.9375 -1.20728,-1.2584 -7.20154,-3.3957 -9.09375,-4.21875 -1.89217,-0.82304 -4.09666,-1.9305 -6.90625,-3.78125 -2.80958,-1.85075 -3.59295,-2.43932 -5.96875,-3.65625 -2.37578,-1.21691 -4.11321,-1.93885 -6.5625,-2.46875 z"
- id="path8105"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter6989);enable-background:new"
- d="m 926.09375,-257.375 c 1.90772,0.59745 4.55348,1.66384 6.125,2.6875 1.5715,1.02365 2.87022,1.43971 5.5,3.28125 2.60291,1.82273 5.02887,2.9722 7.3125,4 2.4672,1.11041 5.75535,2.09323 9.53125,3.84375 -1.20623,-1.2481 -7.1719,-3.31809 -9.0625,-4.125 -1.89058,-0.8069 -4.10242,-1.89104 -6.90625,-3.6875 -2.80385,-1.79644 -3.62704,-2.40251 -6,-3.59375 -2.37297,-1.19124 -4.05362,-1.90283 -6.5,-2.40625 z"
- id="path8107"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter6985);enable-background:new"
- d="m 894.90625,-253.5625 c 1.90213,0.55355 4.58701,1.58887 6.15625,2.59375 1.56923,1.00487 2.87401,1.40864 5.5,3.21875 2.59912,1.79164 5.00034,2.87189 7.28125,3.875 2.46428,1.08374 5.75984,2.04029 9.53125,3.75 -1.2048,-1.23507 -7.17416,-3.24478 -9.0625,-4.03125 -1.88832,-0.78647 -4.0752,-1.8308 -6.875,-3.59375 -2.79977,-1.76294 -3.59919,-2.36836 -5.96875,-3.53125 -2.36957,-1.16288 -4.12325,-1.83412 -6.5625,-2.28125 z"
- id="path8109"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter6965);enable-background:new"
- d="m 863.71875,-248.65625 c 1.88062,0.42909 4.50427,1.38038 6.0625,2.3125 1.55823,0.93211 2.85233,1.25776 5.46875,3 2.58971,1.72444 4.98067,2.70802 7.25,3.625 2.45176,0.99069 5.73959,1.87707 9.5,3.5 -1.20131,-1.20734 -7.15249,-3.06609 -9.03125,-3.78125 -1.87875,-0.71517 -4.0854,-1.68442 -6.875,-3.375 -2.78963,-1.69057 -3.58461,-2.22822 -5.9375,-3.28125 -2.35292,-1.05301 -4.02584,-1.71248 -6.4375,-2 z"
- id="path8111"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter6981);enable-background:new"
- d="m 833.15625,-241.375 c 1.84836,0.29644 4.46945,0.97632 6,1.78125 1.53058,0.80493 2.81374,1.05573 5.375,2.53125 2.53504,1.46046 4.89068,2.32509 7.125,3.0625 2.41399,0.79668 5.65711,1.46689 9.375,2.84375 -1.18771,-1.12873 -7.08772,-2.58975 -8.9375,-3.15625 -1.84977,-0.5665 -4.00342,-1.37392 -6.75,-2.84375 -2.74657,-1.46983 -3.50136,-1.92028 -5.8125,-2.78125 -2.31115,-0.86095 -4.00471,-1.32009 -6.375,-1.4375 z"
- id="path8113"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter6977);enable-background:new"
- d="m 802.90625,-232.3125 c 1.8222,0.21127 4.36576,0.80057 5.875,1.53125 1.50925,0.73066 2.75568,0.92998 5.28125,2.28125 2.49976,1.33746 4.83154,2.04843 7.03125,2.65625 2.37653,0.65667 5.56464,1.07288 9.21875,2.1875 -1.16735,-1.04496 -6.92888,-2.10329 -8.75,-2.5625 -1.82111,-0.45921 -3.95225,-1.12696 -6.65625,-2.4375 -2.70403,-1.31052 -3.47106,-1.7199 -5.75,-2.46875 -2.27895,-0.74883 -3.91325,-1.17931 -6.25,-1.1875 z"
- id="path8115"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter6973);enable-background:new"
- d="m 773.1875,-222.1875 c 1.81109,0.1787 4.32059,0.66506 5.8125,1.34375 1.49194,0.67869 2.7534,0.79822 5.25,2.0625 2.47107,1.25138 4.79005,1.89614 6.96875,2.4375 2.35387,0.58488 5.49134,0.89752 9.09375,1.84375 -1.15084,-0.99116 -6.85251,-1.7833 -8.65625,-2.1875 -1.80372,-0.4042 -3.91553,-1.02116 -6.59375,-2.25 -2.67818,-1.22884 -3.40345,-1.61089 -5.65625,-2.28125 -2.25279,-0.67034 -3.89627,-1.00232 -6.21875,-0.96875 z"
- id="path8117"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter6969);enable-background:new"
- d="m 743.5625,-211.1875 c 1.79281,0.12911 4.27313,0.54965 5.75,1.1875 1.4769,0.63785 2.7161,0.74156 5.1875,1.9375 2.44618,1.18372 4.72054,1.74666 6.875,2.21875 2.32767,0.51003 5.4196,0.68064 9,1.5625 -1.14379,-0.9706 -6.74759,-1.59065 -8.53125,-1.9375 -1.78367,-0.34684 -3.88285,-0.88756 -6.53125,-2.03125 -2.64841,-1.14368 -3.39495,-1.51631 -5.625,-2.125 -2.23008,-0.60868 -3.82594,-0.90966 -6.125,-0.8125 z"
- id="path8119"
- inkscape:connector-curvature="0" />
- <g
- style="fill:#ffffff;fill-opacity:1;filter:url(#filter7345)"
- id="g8121">
- <path
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
- d="m 744.9375,-212.11731 c 0,0 7.22229,-3.22318 9.0625,-3.5 1.84021,-0.27682 3.35225,-0.003 6,0.5625 2.64775,0.56573 8.7357,2.21518 11.1875,3.375 2.4518,1.15982 5.3125,3.5625 5.3125,3.5625 0,0 -7.14644,-2.78019 -10.1875,-3.5625 -3.04106,-0.78231 -7.64461,-2.08374 -10.375,-2.3125 -2.73039,-0.22876 -11,1.875 -11,1.875 z"
- id="path8123"
- sodipodi:nodetypes="czzzczzc"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 735.46875,-206.95416 c 0,0 3.65979,-2.22318 5.5,-2.5 1.84021,-0.27682 3.66475,0.24677 6.3125,0.8125 2.64775,0.56573 8.7357,2.21518 11.1875,3.375 2.4518,1.15982 6.5625,2.125 6.5625,2.125 0,0 -8.39644,-1.34269 -11.4375,-2.125 -3.04106,-0.78231 -7.95711,-2.33374 -10.6875,-2.5625 -2.73039,-0.22876 -7.4375,0.875 -7.4375,0.875 z"
- id="path8125"
- sodipodi:nodetypes="czzzczzc"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 759.85042,-217.61116 c 0,0 8.5437,-3.29857 10.39778,-3.45786 1.85409,-0.1593 3.64166,0.4792 6.2481,1.21208 2.60644,0.73288 8.57724,2.76594 10.95036,4.07925 2.37312,1.31331 6.41417,2.53782 6.41417,2.53782 0,0 -8.29413,-1.87365 -11.27931,-2.84767 -2.98519,-0.97402 -7.79269,-2.83478 -10.50302,-3.23662 -2.71033,-0.40184 -12.22808,1.713 -12.22808,1.713 z"
- id="path8127"
- sodipodi:nodetypes="czzzczzc"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 775.19813,-223.2266 c 0,0 7.77133,-2.78244 9.62831,-2.90349 1.85697,-0.12104 3.631,0.55417 6.22178,1.34062 2.59077,0.78645 8.5184,2.94217 10.86394,4.30412 2.34555,1.36195 6.36049,2.6695 6.36049,2.6695 0,0 -8.25373,-2.04423 -11.21821,-3.07958 -2.96447,-1.03535 -7.73259,-2.99481 -10.43406,-3.45243 -2.70147,-0.45763 -11.42225,1.12126 -11.42225,1.12126 z"
- id="path8129"
- sodipodi:nodetypes="czzzczzc"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 789.64298,-227.95417 c 0,0 8.68256,-3.52031 10.54154,-3.60535 1.85897,-0.085 3.61958,0.62442 6.19463,1.46093 2.57505,0.83649 8.45979,3.10666 10.77851,4.5138 2.31872,1.40715 6.30757,2.79224 6.30757,2.79224 0,0 -8.21257,-2.20377 -11.15643,-3.29636 -2.94386,-1.09259 -7.67312,-3.14408 -10.36522,-3.65397 -2.69209,-0.50988 -12.3006,1.78871 -12.3006,1.78871 z"
- id="path8131"
- sodipodi:nodetypes="czzzczzc"
- inkscape:transform-center-x="13.852145"
- inkscape:transform-center-y="-4.3190906"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 804.49513,-233.32948 c 0,0 7.80756,-2.58281 9.66654,-2.66785 1.85897,-0.085 3.61958,0.62442 6.19463,1.46093 2.57505,0.83649 8.45979,3.10666 10.77851,4.5138 2.31872,1.40715 6.30757,2.79224 6.30757,2.79224 0,0 -8.21257,-2.20377 -11.15643,-3.29636 -2.94386,-1.09259 -7.67312,-3.14408 -10.36522,-3.65397 -2.69209,-0.50988 -11.4256,0.85121 -11.4256,0.85121 z"
- id="path8133"
- sodipodi:nodetypes="czzzczzc"
- inkscape:transform-center-x="13.852145"
- inkscape:transform-center-y="-4.3190906"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 819.55763,-237.57948 c 0,0 8.55756,-2.58281 10.41654,-2.66785 1.85897,-0.085 3.61958,0.62442 6.19463,1.46093 2.57505,0.83649 8.45979,3.10666 10.77851,4.5138 2.31872,1.40715 6.30757,2.79224 6.30757,2.79224 0,0 -8.21257,-2.20377 -11.15643,-3.29636 -2.94386,-1.09259 -7.67312,-3.14408 -10.36522,-3.65397 -2.69209,-0.50988 -12.1756,0.85121 -12.1756,0.85121 z"
- id="path8135"
- sodipodi:nodetypes="czzzczzc"
- inkscape:transform-center-x="13.852145"
- inkscape:transform-center-y="-4.3190906"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 836.23395,-242.60125 c 0,0 6.96702,-1.98723 8.82784,-1.96757 1.86081,0.0197 3.57873,0.82702 6.10265,1.80705 2.52393,0.98 8.27166,3.57758 10.50756,5.11291 2.2359,1.53535 6.14053,3.14261 6.14053,3.14261 0,0 -8.07561,-2.66222 -10.95336,-3.91866 -2.87774,-1.25645 -7.48412,-3.5707 -10.14328,-4.23121 -2.65915,-0.66049 -10.48194,0.0549 -10.48194,0.0549 z"
- id="path8137"
- sodipodi:nodetypes="czzzczzc"
- inkscape:transform-center-x="13.64141"
- inkscape:transform-center-y="-4.9269042"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 850.73028,-246.00461 c 0,0 7.68784,-2.02768 9.54782,-1.96854 1.85997,0.0592 3.56038,0.90279 6.06293,1.93616 2.50255,1.03334 8.19387,3.75232 10.39668,5.33475 2.20282,1.58245 6.07245,3.2722 6.07245,3.2722 0,0 -8.01729,-2.83298 -10.86772,-4.15022 -2.85043,-1.31723 -7.40666,-3.72872 -10.0512,-4.4455 -2.64454,-0.71678 -11.16096,0.0211 -11.16096,0.0211 z"
- id="path8139"
- sodipodi:nodetypes="czzzczzc"
- inkscape:transform-center-x="13.55068"
- inkscape:transform-center-y="-5.1542119"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 864.82496,-249.21081 c 0,0 8.16952,-1.96906 10.02688,-1.85396 1.85735,0.11512 3.53158,1.00956 6.0019,2.11779 2.47031,1.10821 8.0772,3.99727 10.23138,5.64531 2.15418,1.64804 5.9712,3.45352 5.9712,3.45352 0,0 -7.92839,-3.07306 -10.73787,-4.4755 -2.80949,-1.40244 -7.29106,-3.94999 -9.91283,-4.74606 -2.62176,-0.79606 -11.58066,-0.1411 -11.58066,-0.1411 z"
- id="path8141"
- sodipodi:nodetypes="czzzczzc"
- inkscape:transform-center-x="13.41151"
- inkscape:transform-center-y="-5.4740887"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 881.38485,-251.60282 c 0,0 8.08536,-1.90809 9.93837,-1.73664 1.853,0.17147 3.4993,1.11633 5.93482,2.29908 2.43553,1.18271 7.95209,4.2407 10.05523,5.95339 2.10314,1.7127 5.86357,3.63326 5.86357,3.63326 0,0 -7.8314,-3.3124 -10.597,-4.7995 -2.76561,-1.48712 -7.16775,-4.16959 -9.76414,-5.04491 -2.59637,-0.87531 -11.43085,-0.30468 -11.43085,-0.30468 z"
- id="path8143"
- sodipodi:nodetypes="czzzczzc"
- inkscape:transform-center-x="13.258805"
- inkscape:transform-center-y="-5.79376"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 896.58415,-254.34724 c 0,0 7.64166,-1.4277 9.49547,-1.26515 1.8538,0.16256 3.50462,1.0995 5.94579,2.27053 2.44118,1.171 7.97238,4.20246 10.08372,5.90502 2.11134,1.70258 5.88096,3.60505 5.88096,3.60505 0,0 -7.84723,-3.27474 -10.61995,-4.74855 -2.77271,-1.4738 -7.18769,-4.13509 -9.78825,-4.99793 -2.60055,-0.86282 -10.99774,-0.76897 -10.99774,-0.76897 z"
- id="path8145"
- sodipodi:nodetypes="czzzczzc"
- inkscape:transform-center-x="13.28378"
- inkscape:transform-center-y="-5.7433893"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 911.45328,-255.98544 c 0,0 8.64166,-1.5527 10.49547,-1.39015 1.8538,0.16256 3.50462,1.0995 5.94579,2.27053 2.44118,1.171 7.97238,4.20246 10.08372,5.90502 2.11134,1.70258 5.88096,3.60505 5.88096,3.60505 0,0 -7.84723,-3.27474 -10.61995,-4.74855 -2.77271,-1.4738 -7.18769,-4.13509 -9.78825,-4.99793 -2.60055,-0.86282 -11.99774,-0.64397 -11.99774,-0.64397 z"
- id="path8147"
- sodipodi:nodetypes="czzzczzc"
- inkscape:transform-center-x="13.28378"
- inkscape:transform-center-y="-5.7433893"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 927.70328,-258.29794 c 0,0 7.64166,-0.8652 9.49547,-0.70265 1.8538,0.16256 3.50462,1.0995 5.94579,2.27053 2.44118,1.171 7.97238,4.20246 10.08372,5.90502 2.11134,1.70258 5.88096,3.60505 5.88096,3.60505 0,0 -7.84723,-3.27474 -10.61995,-4.74855 -2.77271,-1.4738 -7.18769,-4.13509 -9.78825,-4.99793 -2.60055,-0.86282 -10.99774,-1.33147 -10.99774,-1.33147 z"
- id="path8149"
- sodipodi:nodetypes="czzzczzc"
- inkscape:transform-center-x="13.28378"
- inkscape:transform-center-y="-5.7433893"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 942.82828,-259.48544 c 0,0 8.57916,-1.4902 10.43297,-1.32765 1.8538,0.16256 3.50462,1.0995 5.94579,2.27053 2.44118,1.171 7.97238,4.20246 10.08372,5.90502 2.11134,1.70258 5.88096,3.60505 5.88096,3.60505 0,0 -7.84723,-3.27474 -10.61995,-4.74855 -2.77271,-1.4738 -7.18769,-4.13509 -9.78825,-4.99793 -2.60055,-0.86282 -11.93524,-0.70647 -11.93524,-0.70647 z"
- id="path8151"
- sodipodi:nodetypes="czzzczzc"
- inkscape:transform-center-x="13.28378"
- inkscape:transform-center-y="-5.7433893"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 959.07828,-261.54794 c 0,0 7.82916,-0.8027 9.68297,-0.64015 1.8538,0.16256 3.50462,1.0995 5.94579,2.27053 2.44118,1.171 7.97238,4.20246 10.08372,5.90502 2.11134,1.70258 5.88096,3.60505 5.88096,3.60505 0,0 -7.84723,-3.27474 -10.61995,-4.74855 -2.77271,-1.4738 -7.18769,-4.13509 -9.78825,-4.99793 -2.60055,-0.86282 -11.18524,-1.39397 -11.18524,-1.39397 z"
- id="path8153"
- sodipodi:nodetypes="czzzczzc"
- inkscape:transform-center-x="13.28378"
- inkscape:transform-center-y="-5.7433893"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 974.45328,-262.79794 c 0,0 8.39166,-1.1777 10.24547,-1.01515 1.8538,0.16256 3.50462,1.0995 5.94579,2.27053 2.44118,1.171 7.97238,4.20246 10.08376,5.90502 2.1113,1.70258 5.8809,3.60505 5.8809,3.60505 0,0 -7.84721,-3.27474 -10.61993,-4.74855 -2.77271,-1.4738 -7.18769,-4.13509 -9.78825,-4.99793 -2.60055,-0.86282 -11.74774,-1.01897 -11.74774,-1.01897 z"
- id="path8155"
- sodipodi:nodetypes="czzzczzc"
- inkscape:transform-center-x="13.28378"
- inkscape:transform-center-y="-5.7433893"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 990.64078,-264.86044 c 0,0 6.89166,-0.9902 8.74547,-0.82765 1.85385,0.16256 3.50465,1.0995 5.94575,2.27053 2.4412,1.171 7.9724,4.20246 10.0838,5.90502 2.1113,1.70258 5.8809,3.60505 5.8809,3.60505 0,0 -7.8472,-3.27474 -10.6199,-4.74855 -2.7727,-1.4738 -7.1877,-4.13509 -9.7883,-4.99793 -2.60053,-0.86282 -10.24772,-1.20647 -10.24772,-1.20647 z"
- id="path8157"
- sodipodi:nodetypes="czzzczzc"
- inkscape:transform-center-x="13.28378"
- inkscape:transform-center-y="-5.7433893"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 1007.7658,-265.79794 c 0,0 6.8291,-1.1777 8.683,-1.01515 1.8538,0.16256 3.5046,1.0995 5.9457,2.27053 2.4412,1.171 7.9724,4.20246 10.0838,5.90502 2.1113,1.70258 5.8809,3.60505 5.8809,3.60505 0,0 -7.8472,-3.27474 -10.6199,-4.74855 -2.7727,-1.4738 -7.1877,-4.13509 -9.7883,-4.99793 -2.6005,-0.86282 -10.1852,-1.01897 -10.1852,-1.01897 z"
- id="path8159"
- sodipodi:nodetypes="czzzczzc"
- inkscape:transform-center-x="13.28378"
- inkscape:transform-center-y="-5.7433893"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 1023.8908,-267.79794 c 0,0 6.0791,-0.4277 7.933,-0.26515 1.8538,0.16256 3.5046,1.0995 5.9457,2.27053 2.4412,1.171 7.9724,4.20246 10.0838,5.90502 2.1113,1.70258 5.8809,3.60505 5.8809,3.60505 0,0 -7.8472,-3.27474 -10.6199,-4.74855 -2.7727,-1.4738 -7.1877,-4.13509 -9.7883,-4.99793 -2.6005,-0.86282 -9.4352,-1.76897 -9.4352,-1.76897 z"
- id="path8161"
- sodipodi:nodetypes="czzzczzc"
- inkscape:transform-center-x="13.28378"
- inkscape:transform-center-y="-5.7433893"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 1039.7033,-269.17294 c 0,0 6.4541,-0.6777 8.308,-0.51515 1.8538,0.16256 3.5046,1.0995 5.9457,2.27053 2.4412,1.171 7.9724,4.20246 10.0838,5.90502 2.1113,1.70258 5.8809,3.60505 5.8809,3.60505 0,0 -7.8472,-3.27474 -10.6199,-4.74855 -2.7727,-1.4738 -7.1877,-4.13509 -9.7883,-4.99793 -2.6005,-0.86282 -9.8102,-1.51897 -9.8102,-1.51897 z"
- id="path8163"
- sodipodi:nodetypes="czzzczzc"
- inkscape:transform-center-x="13.28378"
- inkscape:transform-center-y="-5.7433893"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 1055.2718,-271.03319 c 0,0 5.4976,-0.90945 7.3578,-0.85348 1.8601,0.056 3.5619,0.89674 6.0661,1.92586 2.5044,1.0291 8.2003,3.7384 10.4058,5.31709 2.2055,1.57871 6.078,3.2619 6.078,3.2619 0,0 -8.022,-2.81939 -10.8748,-4.13178 -2.8526,-1.31238 -7.4129,-3.71613 -10.0587,-4.42843 -2.6457,-0.71228 -8.9742,-1.09116 -8.9742,-1.09116 z"
- id="path8165"
- sodipodi:nodetypes="czzzczzc"
- inkscape:transform-center-x="13.55813"
- inkscape:transform-center-y="-5.1360724"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 1072.7007,-273.48537 c 0,0 4.5472,-1.15581 6.408,-1.18621 1.8607,-0.0304 3.5996,0.73049 6.1489,1.64231 2.5494,0.91177 8.3649,3.35386 10.6414,4.8285 2.2763,1.47468 6.2227,2.97636 6.2227,2.97636 0,0 -8.1442,-2.44411 -11.0547,-3.62272 -2.9105,-1.1786 -7.5774,-3.36815 -10.2534,-3.95691 -2.6759,-0.58875 -8.1129,-0.68133 -8.1129,-0.68133 z"
- id="path8167"
- sodipodi:nodetypes="czzzczzc"
- inkscape:transform-center-x="13.74758"
- inkscape:transform-center-y="-4.6370147"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 1087.1585,-276.5244 c 0,0 5.96,-1.77355 7.8202,-1.83024 1.86,-0.0567 3.6096,0.67955 6.1715,1.55525 2.562,0.87566 2.5226,0.85713 5.3335,1.49015 2.7969,0.62986 7.0767,1.51313 7.0767,1.51313 0,0 -3.6155,-0.0163 -6.7923,-0.46614 -3.1155,-0.44119 -7.3743,-1.69825 -10.0584,-2.24913 -2.6839,-0.55088 -9.5512,-0.013 -9.5512,-0.013 z"
- id="path8169"
- sodipodi:nodetypes="czzzczzc"
- inkscape:transform-center-x="13.79933"
- inkscape:transform-center-y="-4.4842392"
- inkscape:connector-curvature="0" />
- <path
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
- d="m 1099.25,-279.92981 c 0.1612,0.26862 11.2081,-4.60046 12.1875,-4.6875 0.9794,-0.087 2,3.125 2,3.125 0,0 -0.7751,-1.50434 -2.875,-1.0625 -2.0999,0.44184 -11.3009,2.67141 -11.3125,2.625 z"
- id="path8171"
- sodipodi:nodetypes="czczc"
- inkscape:connector-curvature="0" />
- </g>
- <path
- sodipodi:nodetypes="czscsssscssssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssccsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscc"
- style="display:inline;opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter7333);enable-background:new"
- d="m 1107.4532,-284.0938 c -0.4187,0.21283 -0.1556,0.0939 -0.6472,0.30581 -0.4861,0.20954 -1.7234,0.57439 -4.0796,1.45895 -3.3311,1.25057 -5.8302,2.15344 -7.0259,3.0661 -1.5361,0.0213 -3.7205,0.23331 -5.6563,0.71875 -2.9815,0.74766 -4.8552,1.17401 -6.75,1.59375 -1.8948,0.41972 -1.6755,0.64219 -2.875,0.875 -1.2966,0.25166 -1.7214,-0.009 -5.4375,0.78125 -3.4899,0.74214 -8.8948,1.93107 -10.1562,2.6875 -1.5839,-0.18079 -3.8675,-0.32178 -5.8438,-0.0312 -3.0404,0.44695 -4.9162,0.67276 -6.8437,0.90625 -0.6554,0.0794 -1.0411,0.20078 -1.3438,0.28125 -0.4262,0.13165 -0.6858,0.26002 -1.375,0.34375 -1.3116,0.15936 -1.7622,-0.15683 -5.5312,0.28125 -3.5539,0.41308 -9.0054,1.27282 -10.25,1.9375 -1.599,-0.2973 -3.8578,-0.53419 -5.8438,-0.34375 -3.0588,0.29331 -4.972,0.48399 -6.9062,0.65625 -1.9343,0.17226 -1.6887,0.42237 -2.9063,0.53125 -1.3162,0.11769 -1.7598,-0.16363 -5.5312,0.25 -3.5419,0.38844 -9.0079,1.20927 -10.2813,1.875 -1.5989,-0.2947 -3.88718,-0.50701 -5.87501,-0.3125 -3.05824,0.29924 -4.94113,0.48024 -6.875,0.65625 -0.65749,0.0598 -1.04004,0.17856 -1.34375,0.25 -0.42765,0.11895 -0.68351,0.21807 -1.375,0.28125 -1.31596,0.12025 -1.75976,-0.19488 -5.53125,0.21875 -3.55614,0.39001 -9.00554,1.23916 -10.25,1.90625 -1.59863,-0.29419 -3.85984,-0.52372 -5.84375,-0.3125 -3.0556,0.32532 -4.97404,0.52624 -6.90625,0.71875 -1.93221,0.1925 -1.68987,0.44088 -2.90625,0.5625 -1.31488,0.13146 -1.76298,-0.16454 -5.53125,0.28125 -3.53887,0.41865 -8.97768,1.29217 -10.25,1.96875 -1.59755,-0.28105 -3.85996,-0.42043 -5.84375,-0.1875 -3.05198,0.35836 -4.94508,0.56786 -6.875,0.78125 -0.6562,0.0726 -1.04066,0.17269 -1.34375,0.25 -0.42677,0.12722 -0.68491,0.2672 -1.375,0.34375 -1.31333,0.14568 -1.76746,-0.17402 -5.53125,0.3125 -3.54889,0.45875 -8.97863,1.41902 -10.21875,2.125 -1.59305,-0.24424 -3.83381,-0.38135 -5.8125,-0.125 -3.04759,0.39481 -4.95071,0.64845 -6.875,0.90625 -1.92428,0.25779 -1.72611,0.49353 -2.9375,0.65625 -1.30946,0.1759 -1.74719,-0.10438 -5.5,0.46875 -3.52429,0.53824 -8.92315,1.69917 -10.1875,2.4375 -1.5875,-0.20354 -3.8455,-0.25473 -5.8125,0.0937 -3.02617,0.53612 -4.89889,0.86169 -6.8125,1.1875 -0.65061,0.11077 -1.01371,0.27094 -1.3125,0.375 -0.42067,0.16488 -0.66345,0.3313 -1.34375,0.46875 -1.29465,0.26159 -1.72712,-0.006 -5.4375,0.8125 -3.49853,0.77195 -8.84595,2.38293 -10.0625,3.21875 -1.56278,-0.0775 -3.75758,0.0853 -5.6875,0.59375 -2.97244,0.78313 -4.81761,1.23209 -6.6875,1.75 -1.86988,0.5179 -1.6666,0.76728 -2.84375,1.09375 -1.27246,0.3529 -1.69703,0.10709 -5.34375,1.1875 -3.4247,1.01463 -8.64944,2.93317 -9.875,3.84375 -1.53883,0.0127 -3.71983,0.27222 -5.625,0.875 -2.93106,0.92734 -4.75031,1.45842 -6.59375,2.0625 -0.62676,0.20538 -0.99173,0.39258 -1.28125,0.53125 -0.40763,0.21361 -0.65334,0.40875 -1.3125,0.625 -1.25446,0.41154 -1.68611,0.18904 -5.28125,1.4375 -3.38985,1.17717 -8.59498,3.2137 -9.78125,4.15625 -1.52389,0.0597 -3.65005,0.39487 -5.53125,1.0625 -2.89739,1.02829 -4.69908,1.67548 -6.53125,2.3125 -1.83217,0.63701 -1.62785,0.84854 -2.78125,1.25 -1.24678,0.43396 -1.66361,0.19972 -5.21875,1.5625 -3.33867,1.2798 -8.48715,3.48255 -9.6875,4.46875 -1.50718,0.10769 -3.63569,0.4988 -5.5,1.21875 -2.86818,1.1076 -4.6238,1.78156 -6.4375,2.46875 -0.61666,0.23363 -0.99641,0.44203 -1.28125,0.59375 0,0 0,1.09375 0,1.09375 0.11178,-0.22236 0.38599,-0.81743 0.90625,-1.09375 0.69797,-0.37072 4.81363,-1.99337 6.8125,-2.71875 1.65686,-0.60125 4.15389,-1.32868 5.96875,-1.3125 0.30162,0.003 0.58762,0.0509 0.84375,0.0937 1.84249,0.30825 7.46875,1.5625 7.46875,1.5625 -10e-6,0 -6.23349,-1.64675 -7.03125,-1.84375 -0.19079,-0.0471 -0.53572,-0.0687 -0.96875,-0.0625 1.14546,-0.86971 4.761,-2.39351 7.34375,-3.4375 2.83822,-1.14727 3.11681,-1.25182 5.0625,-1.65625 2.0083,-0.41744 3.15625,-0.5 3.15625,-0.5 0,1e-5 -0.0824,-0.60114 0.96875,-1.125 0.7051,-0.35141 4.88702,-1.8924 6.90625,-2.5625 1.9519,-0.64773 5.0574,-1.3585 6.875,-1 1.86323,0.3675 7.53125,1.8125 7.53125,1.8125 1e-5,0 -6.287,-1.87111 -7.09375,-2.09375 -0.19292,-0.0533 -0.53084,-0.086 -0.96875,-0.0937 1.15834,-0.83288 4.79444,-2.19532 7.40625,-3.15625 2.87016,-1.05601 3.16734,-1.1618 5.125,-1.53125 1.85349,-0.34979 2.85884,-0.42548 3.03125,-0.4375 0.1136,-0.21724 0.37745,-0.81002 0.90625,-1.0625 0.70944,-0.33874 4.92607,-1.71275 6.96875,-2.3125 1.69317,-0.49711 4.24077,-1.03677 6.09375,-0.90625 0.30795,0.0217 0.61349,0.0973 0.875,0.15625 1.88118,0.42432 7.59375,2.03125 7.59375,2.03125 1e-5,0 -6.34174,-2.06525 -7.15625,-2.3125 -0.19479,-0.0591 -0.55788,-0.10394 -1,-0.125 1.16949,-0.79755 4.86302,-2.05622 7.5,-2.9375 2.89781,-0.96847 3.23301,-1.00332 5.21875,-1.28125 2.04965,-0.28689 3.1875,-0.3125 3.1875,-0.3125 -2e-5,0 -0.0727,-0.60697 1,-1.0625 0.7196,-0.30557 4.99098,-1.50075 7.0625,-2 2.00244,-0.48258 5.19849,-0.92829 7.0625,-0.40625 1.91078,0.53515 7.71875,2.5 7.71875,2.5 0,0 -6.42266,-2.42351 -7.25,-2.71875 -0.19784,-0.0706 -0.58216,-0.14039 -1.03125,-0.1875 1.1879,-0.72865 4.91527,-1.77408 7.59375,-2.5 2.94342,-0.79775 3.29208,-0.77083 5.3125,-0.90625 1.91289,-0.12823 2.94705,-0.0711 3.125,-0.0625 0.11728,-0.20366 0.39176,-0.77948 0.9375,-0.96875 0.73219,-0.25394 5.07852,-1.04789 7.1875,-1.375 1.74813,-0.27111 4.40088,-0.4847 6.3125,-0.0937 0.31766,0.065 0.60522,0.18551 0.875,0.28125 1.94074,0.68873 7.84375,3.09375 7.84375,3.09375 1e-5,0 -6.53471,-2.95077 -7.375,-3.3125 -0.20097,-0.0865 -0.57513,-0.16679 -1.03125,-0.25 1.2065,-0.63318 5.02956,-1.3956 7.75,-1.90625 2.98953,-0.56119 3.30023,-0.52954 5.34375,-0.53125 2.10926,-0.002 3.3125,0.125 3.3125,0.125 0,1e-5 -0.0727,-0.63119 1.03125,-0.9375 0.74052,-0.20547 5.12612,-0.83387 7.25,-1.0625 2.05302,-0.22099 5.31863,-0.25222 7.21875,0.46875 1.94779,0.73907 7.84375,3.375 7.84375,3.375 2e-5,0 -6.56288,-3.17897 -7.40625,-3.5625 -0.20168,-0.0917 -0.54221,-0.18621 -1,-0.28125 1.21092,-0.60188 4.98442,-1.24884 7.71875,-1.65625 3.0048,-0.44772 3.32551,-0.4517 5.375,-0.40625 1.94045,0.043 3.00699,0.19423 3.1875,0.21875 0.11892,-0.19316 0.3839,-0.76583 0.9375,-0.90625 0.74271,-0.18838 5.15429,-0.73428 7.28125,-0.9375 1.76303,-0.16842 4.42009,-0.23429 6.34375,0.25 0.31968,0.0805 0.60351,0.20359 0.875,0.3125 1.95293,0.78349 7.90625,3.46875 7.90625,3.46875 -2e-5,0 -6.59191,-3.25348 -7.4375,-3.65625 -0.20222,-0.0963 -0.57226,-0.20703 -1.03125,-0.3125 1.21414,-0.57427 5.04366,-1.12219 7.78125,-1.5 3.00838,-0.4152 3.32307,-0.44263 5.375,-0.375 2.11798,0.0698 3.3125,0.25 3.3125,0.25 -2e-5,0 -0.0772,-0.63741 1.03125,-0.90625 0.74362,-0.18035 5.15176,-0.66355 7.28125,-0.84375 2.05847,-0.17417 5.34324,-0.12432 7.25,0.65625 1.95459,0.80016 7.875,3.53125 7.875,3.53125 -2e-5,0 -6.55993,-3.30876 -7.40625,-3.71875 -0.20237,-0.0981 -0.57186,-0.2031 -1.03125,-0.3125 1.21517,-0.5639 5.01008,-1.1143 7.75,-1.46875 3.01091,-0.38952 3.32131,-0.39765 5.375,-0.3125 1.94439,0.0806 3.00663,0.25324 3.1875,0.28125 0.11916,-0.19086 0.38277,-0.74531 0.9375,-0.875 0.74426,-0.174 5.14993,-0.65047 7.28125,-0.8125 1.76662,-0.13427 4.44971,-0.12571 6.37501,0.375 0.32,0.0832 0.6033,0.20127 0.875,0.3125 1.9546,0.80016 7.9063,3.5625 7.9063,3.5625 -1e-4,0 -6.5912,-3.34001 -7.4375,-3.75 -0.2024,-0.0981 -0.5719,-0.20311 -1.0313,-0.3125 1.2151,-0.5639 5.0413,-1.08306 7.7813,-1.4375 3.0109,-0.38953 3.3525,-0.4289 5.4062,-0.34375 2.1197,0.0879 3.3125,0.3125 3.3125,0.3125 0,0 -0.078,-0.64902 1.0313,-0.90625 0.7443,-0.17256 5.1495,-0.62336 7.2812,-0.78125 2.0606,-0.1526 5.3429,-0.0968 7.25,0.6875 1.955,0.80395 7.875,3.5 7.875,3.5 0,0 -6.5598,-3.27587 -7.4062,-3.6875 -0.2025,-0.0984 -0.5718,-0.20222 -1.0313,-0.3125 1.2154,-0.56154 5.0119,-1.12778 7.75,-1.5 3.009,-0.40905 3.3227,-0.41558 5.375,-0.34375 1.9431,0.068 3.0072,0.16485 3.1875,0.1875 0.1188,-0.1944 0.3846,-0.72881 0.9375,-0.875 0.7418,-0.19612 5.1311,-0.82878 7.25,-1.09375 1.7564,-0.21961 4.4053,-0.33231 6.3125,0.0312 0.3169,0.0604 0.6058,0.18938 0.875,0.28125 1.9362,0.66092 7.8438,2.9375 7.8438,2.9375 -10e-5,0 -6.5367,-2.80655 -7.375,-3.15625 -0.2005,-0.0836 -0.5762,-0.17333 -1.0313,-0.25 1.2037,-0.65046 5.0191,-1.37195 7.7188,-2 2.9667,-0.6902 3.2889,-0.75507 5.3125,-0.875 2.0886,-0.1238 3.2812,-0.0312 3.2812,-0.0312 0,1e-5 -0.087,-0.63205 1,-1.03125 0.7292,-0.2678 5.0472,-1.33797 7.125,-1.8125 2.0085,-0.45869 5.1679,-1.0293 7,-0.625 1.8781,0.41446 13.5782,3.01563 13.5782,3.01563 0,0 -12.3275,-3.02266 -13.1407,-3.26563 -0.1945,-0.0581 -0.5586,-0.10626 -1,-0.125 1.1676,-0.80369 3.5142,-1.6873 6.1094,-2.70312 1.6814,-0.65818 0.9237,-0.37659 2.7759,-1.0036 1.7536,-0.59366 2.4854,-1.01071 2.6304,-1.11299 0.3461,-0.20651 -0.356,-0.12188 -0.5442,-0.0424 z"
- id="path8173"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter7285);enable-background:new"
- d="m 1082.625,-275.125 c 1.873,0.39348 4.4961,1.14555 6.0313,1.96875 1.5352,0.82319 2.8222,1.056 5.375,2.5 2.5266,1.42926 4.7958,2.00696 6.9687,2.53125 2.3476,0.56642 5.4354,0.71523 8.8438,1.1875 -1.0889,-0.83975 -6.6074,-1.17245 -8.4063,-1.5625 -1.7989,-0.39006 -3.8941,-1.01616 -6.5937,-2.3125 -2.6997,-1.29634 -3.4944,-1.79896 -5.8125,-2.6875 -2.3182,-0.88854 -4.0044,-1.38314 -6.4063,-1.625 z"
- id="path8175"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter7289);enable-background:new"
- d="m 1051.4688,-270 c 1.9053,0.57759 4.5281,1.61572 6.0937,2.59375 1.5656,0.97802 2.8802,1.35981 5.5,3.125 2.593,1.74716 4.9859,2.70927 7.25,3.59375 2.4461,0.95557 5.6826,1.65713 9.4063,3.0625 -1.1896,-1.13784 -7.0631,-2.68675 -8.9375,-3.375 -1.8745,-0.68825 -4.0818,-1.5662 -6.875,-3.28125 -2.7933,-1.71504 -3.5736,-2.2839 -5.9375,-3.40625 -2.3641,-1.12234 -4.0567,-1.83455 -6.5,-2.3125 z"
- id="path8177"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter7293);enable-background:new"
- d="m 1020.2188,-266.84375 c 1.9119,0.63811 4.5812,1.75536 6.1562,2.8125 1.5751,1.05715 2.8956,1.50867 5.5313,3.40625 2.6086,1.87821 5.0284,3.03003 7.3125,4.0625 2.4677,1.11545 5.7645,2.1733 9.5312,3.84375 -1.2033,-1.22253 -7.2028,-3.31423 -9.0937,-4.125 -1.891,-0.81077 -4.0649,-1.89379 -6.875,-3.75 -2.8102,-1.8562 -3.6218,-2.47693 -6,-3.71875 -2.3783,-1.2418 -4.1107,-1.97569 -6.5625,-2.53125 z"
- id="path8179"
- inkscape:connector-curvature="0" />
- <path
- sodipodi:nodetypes="cssscscsscsssccscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssccscsscscssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsszsszssszzcczzzczzzc"
- style="display:inline;opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter7337);enable-background:new"
- d="m 1110.1719,-266.89063 c 0.1508,0.0486 0.688,0.631 0.1094,1.48438 -0.8101,1.19459 -5.7049,3.32429 -8.5625,4.125 -2.8449,0.79712 -6.2901,0.97774 -10.5625,-0.375 -4.3016,-1.36195 -5.4697,-2.46872 -10.6563,-4.3125 4.664,2.11517 6.1953,3.95233 10.125,5.34375 1.6207,0.57387 3.3671,0.9396 5.0625,1.03125 -0.4451,0.32563 -1.5303,0.9833 -3.5625,1.59375 -2.7955,0.83969 -6.6491,1.53378 -8.25,1.625 -1.5146,0.0863 -3.142,-0.51249 -3.4375,-0.625 0.1667,0.10308 0.3732,0.37734 -0.25,1.03125 -0.8993,0.94363 -6.1474,1.923 -9.125,2.25 -2.9643,0.32555 -6.5216,-0.016 -10.9062,-1.90625 -3.978,-1.71497 -5.339,-2.91536 -9.4063,-4.75 0,0 0,0.15625 0,0.15625 3.6431,2.09529 5.284,3.88327 8.875,5.5625 1.7302,0.80909 3.5917,1.40876 5.4063,1.71875 -0.5349,0.28676 -1.5578,0.71151 -3.4375,1.03125 -2.869,0.48796 -6.809,0.81614 -8.4375,0.75 -0.8507,-0.0345 -1.7286,-0.18437 -2.4063,-0.40625 -0.6848,-0.21488 -1.1897,-0.44467 -1.3125,-0.5 0.1694,0.10721 0.4311,0.40288 -0.2187,1.03125 -0.9097,0.87962 -6.2461,1.33638 -9.25,1.46875 -2.9905,0.13179 -6.5889,-0.45063 -11,-2.5625 -4.4412,-2.12626 -5.6415,-3.4016 -10.9063,-5.78125 4.7343,2.59704 6.2865,4.6291 10.3438,6.71875 1.6733,0.86185 3.4852,1.49425 5.25,1.9375 -0.4633,0.23332 -1.5894,0.68814 -3.6875,0.9375 -2.8863,0.34298 -6.8346,0.49288 -8.4688,0.375 -1.5462,-0.1115 -3.2312,-0.85696 -3.5312,-1 0.1691,0.12029 0.4138,0.41048 -0.2188,1 -0.9128,0.85073 -6.2441,1.26212 -9.25,1.375 -2.9925,0.11237 -6.5897,-0.49043 -11,-2.59375 -4.00125,-1.90823 -5.38803,-3.13783 -9.46875,-5.09375 -3e-5,0 0,0.15625 0,0.15625 3.65506,2.20392 5.29421,4.05255 8.90625,5.90625 1.74029,0.89315 3.637,1.52827 5.4688,1.96875 -0.54,0.2483 -1.5781,0.61533 -3.4688,0.84375 -2.88568,0.34858 -6.86605,0.52095 -8.5,0.40625 -0.85345,-0.0599 -1.72631,-0.25791 -2.40625,-0.5 -0.6871,-0.2353 -1.18935,-0.47226 -1.3125,-0.53125 0.16998,0.11227 0.46448,0.42225 -0.1875,1.03125 -0.91265,0.8525 -6.27533,1.29337 -9.28125,1.40625 -2.99246,0.11237 -6.59346,-0.52805 -11,-2.59375 -4.43653,-2.07978 -5.64688,-3.33171 -10.90625,-5.65625 4.72938,2.54749 6.29074,4.5778 10.34375,6.625 1.67155,0.84433 3.48554,1.46643 5.25,1.90625 -0.46323,0.23422 -1.5897,0.68407 -3.6875,0.9375 -2.88569,0.34858 -6.8362,0.56952 -8.46875,0.46875 -1.54456,-0.0953 -3.20031,-0.82885 -3.5,-0.96875 0.16899,0.11853 0.38192,0.40385 -0.25,1 -0.91186,0.86028 -6.24665,1.33025 -9.25,1.46875 -2.98995,0.1379 -6.56745,-0.45068 -10.96875,-2.46875 -3.99308,-1.83089 -5.36511,-3.0292 -9.4375,-4.90625 -2e-5,0 0,0.15625 0,0.15625 3.64761,2.13327 5.27033,3.93487 8.875,5.71875 1.73675,0.85951 3.60727,1.45014 5.4375,1.875 -0.53947,0.2529 -1.55063,0.64129 -3.4375,0.90625 -2.87978,0.40436 -6.83813,0.64562 -8.46875,0.5625 -0.85172,-0.0434 -1.7277,-0.20855 -2.40625,-0.4375 -0.68569,-0.22201 -1.1896,-0.44339 -1.3125,-0.5 0.16959,0.10899 0.4319,0.40965 -0.21875,1.03125 -0.91079,0.87014 -6.25021,1.39152 -9.25,1.5625 -2.98633,0.17021 -6.57381,-0.31577 -10.96875,-2.28125 -4.42489,-1.97888 -5.60596,-3.22819 -10.84375,-5.375 4.70997,2.38767 6.27017,4.38873 10.3125,6.34375 1.66715,0.80631 3.46043,1.39658 5.21875,1.78125 -0.46163,0.2487 -1.597,0.71225 -3.6875,1.03125 -2.8756,0.43876 -6.7804,0.7331 -8.40625,0.6875 -1.53823,-0.0431 -3.2328,-0.74522 -3.53125,-0.875 0.16833,0.11282 0.41057,0.41375 -0.21875,1.03125 -0.90812,0.8911 -6.20295,1.52825 -9.1875,1.8125 -2.97118,0.28298 -6.57342,-0.1758 -10.9375,-1.9375 -3.95934,-1.59831 -5.32915,-2.79487 -9.34375,-4.3125 3e-5,0 0,0.15625 0,0.15625 3.5959,1.81135 5.23831,3.58233 8.8125,5.15625 1.72207,0.75835 3.58748,1.28895 5.40625,1.625 -0.53609,0.27908 -1.56658,0.68763 -3.4375,1.0625 -2.85539,0.5721 -6.78942,1.01939 -8.40625,1.03125 -0.84451,0.006 -1.70608,-0.0809 -2.375,-0.25 -0.67591,-0.16151 -1.16009,-0.32923 -1.28125,-0.375 0.16722,0.094 0.42267,0.38348 -0.21875,1.0625 -0.89787,0.95052 -6.18648,1.91708 -9.125,2.4375 -2.92534,0.51809 -6.43215,0.37424 -10.71875,-1.03125 -4.3158,-1.41507 -5.47277,-2.52994 -10.5625,-3.96875 4.57685,1.75101 6.08855,3.56006 10.03125,5 1.62608,0.59389 3.36885,0.95565 5.09375,1.15625 -0.45285,0.29702 -1.55478,0.88339 -3.59375,1.46875 -2.80472,0.80517 -6.63886,1.57583 -8.21875,1.75 -1.49475,0.1648 -3.11623,-0.31681 -3.40625,-0.40625 0.16356,0.0901 0.39278,0.35993 -0.21875,1.0625 -0.88247,1.01385 -6.04452,2.37165 -8.9375,3.0625 -2.88002,0.68778 -6.3356,0.76002 -10.5625,-0.4375 -3.83485,-1.08645 -5.17258,-2.07237 -9.0625,-3.125 -10e-6,0 0,0.15625 0,0.15625 3.48418,1.39485 5.06941,2.9194 8.53125,4.03125 1.66793,0.53572 3.45578,0.78674 5.21875,0.875 -0.51964,0.35212 -1.50039,0.91452 -3.3125,1.53125 -2.76566,0.94125 -6.59024,1.93537 -8.15625,2.15625 -0.81794,0.11539 -1.6331,0.12283 -2.28125,0.0312 -0.65496,-0.0832 -1.1326,-0.21827 -1.25,-0.25 0.16204,0.0746 0.43399,0.34044 -0.1875,1.09375 -0.87,1.05453 -6.00963,2.65925 -8.875,3.4375 -2.85253,0.77476 -6.25912,0.9582 -10.4375,-0.0937 -4.20683,-1.05913 -5.35669,-2.04166 -10.34375,-3.15625 4.48454,1.45946 5.96935,3.13523 9.8125,4.25 1.58504,0.45977 3.28679,0.63825 4.96875,0.6875 -0.44157,0.33676 -1.51251,1.02773 -3.5,1.78125 -2.73393,1.03649 -6.45198,2.16269 -8,2.4375 -1.46462,0.26002 -3.05958,-0.11654 -3.34375,-0.1875 0.16025,0.0796 0.38044,0.32098 -0.21875,1.0625 -0.86466,1.07006 -5.91652,2.81815 -8.75,3.6875 -2.8208,0.86547 -6.2075,1.15631 -10.34375,0.21875 -3.75259,-0.85061 -5.04785,-1.71647 -8.875,-2.59375 0,0 0,0.15625 0,0.15625 3.42796,1.23779 4.98741,2.6323 8.375,3.53125 1.63216,0.43314 3.36704,0.58301 5.09375,0.5625 -0.50893,0.38417 -1.47675,1.02182 -3.25,1.75 -2.70634,1.11134 -6.43633,2.30781 -7.96875,2.625 -0.8004,0.16569 -1.61231,0.21862 -2.25,0.15625 0,0 0,0.51552 0,0.92229 0,0.26507 0,0.48396 0,0.48396 0.22645,-0.14468 0.44891,-0.27261 0.71875,-0.375 1.08052,-0.40998 2.17161,-0.21577 6,-1.6875 3.82843,-1.47174 5.22412,-2.00498 5.90625,-2.40625 0.6796,-0.39978 1.61165,-0.87937 2.21875,-1.53125 1.82685,-0.13775 3.57075,-0.49323 4.9375,-1 2.96812,-1.10052 4.87537,-1.80619 6.78125,-2.46875 1.90586,-0.66254 2.35409,-1.41487 3.40625,-1.78125 1.09155,-0.38011 2.19511,-0.16538 6.0625,-1.53125 3.86745,-1.36586 5.28316,-1.82708 5.96875,-2.21875 0.70109,-0.40052 1.70081,-0.93298 2.3125,-1.59375 1.9708,-0.0547 3.81685,-0.38463 5.28125,-0.875 3.00148,-1.00508 4.92615,-1.62171 6.84375,-2.25 1.5386,-0.5041 2.17402,-1.04677 2.90625,-1.4375 0.23016,-0.13431 0.47574,-0.25373 0.75,-0.34375 1.09823,-0.36048 2.18145,-0.0814 6.09375,-1.3125 3.91233,-1.23113 5.36605,-1.67295 6.0625,-2.03125 0.69388,-0.35697 1.63015,-0.79261 2.25,-1.40625 1.86521,-0.0227 3.63581,-0.26683 5.03125,-0.6875 3.03043,-0.91354 4.99238,-1.4301 6.9375,-1.96875 1.94511,-0.53864 2.42618,-1.26452 3.5,-1.5625 1.11401,-0.30915 2.21994,0.007 6.1875,-1.03125 3.96761,-1.03863 5.41758,-1.43273 6.125,-1.75 0.73487,-0.32959 1.81383,-0.75372 2.4375,-1.375 1.99774,0.116 3.85743,-0.0201 5.34375,-0.375 3.07811,-0.735 5.08344,-1.10094 7.0625,-1.5 1.58792,-0.32018 2.24429,-0.79055 3,-1.09375 0.23757,-0.1068 0.46695,-0.19276 0.75,-0.25 1.13347,-0.22919 2.30448,0.20893 6.34375,-0.5 4.03933,-0.70893 5.50025,-0.92709 6.21875,-1.1875 0.71586,-0.25944 1.70428,-0.56724 2.34375,-1.09375 1.92427,0.23949 3.74788,0.22453 5.1875,0 3.12633,-0.48762 5.15455,-0.70067 7.15625,-0.96875 2.00171,-0.26807 2.48869,-0.94514 3.59375,-1.09375 1.14639,-0.15418 2.27592,0.30157 6.34375,-0.21875 4.06784,-0.52032 5.56013,-0.69573 6.28125,-0.9375 0.7371,-0.24714 1.79809,-0.58623 2.4375,-1.125 2.05007,0.33553 3.97378,0.39796 5.5,0.21875 3.14231,-0.36896 5.17994,-0.55936 7.1875,-0.78125 1.61076,-0.17802 2.26467,-0.6082 3.03125,-0.84375 0.24094,-0.0855 0.49412,-0.1556 0.78125,-0.1875 1.14978,-0.12772 2.30129,0.34665 6.375,-0.125 4.07374,-0.47165 5.55909,-0.6106 6.28125,-0.84375 0.71946,-0.23227 1.70024,-0.47346 2.34375,-0.96875 1.93637,0.33346 3.77006,0.40424 5.21875,0.25 3.14602,-0.33495 5.17756,-0.51859 7.1875,-0.71875 2.00996,-0.20014 2.48414,-0.82639 3.59375,-0.9375 1.15114,-0.11528 2.29643,0.36506 6.375,-0.0625 4.07861,-0.42756 5.58886,-0.56209 6.3125,-0.78125 0.73915,-0.22386 1.79572,-0.51325 2.4375,-1.03125 2.0571,0.39867 4.00187,0.4934 5.53125,0.34375 3.14873,-0.3081 5.17584,-0.47325 7.1875,-0.65625 1.61407,-0.14682 2.2631,-0.56055 3.03125,-0.78125 0.24142,-0.0809 0.49353,-0.12991 0.78125,-0.15625 1.15211,-0.10545 2.29296,0.39275 6.375,0 4.08208,-0.39275 5.5889,-0.53084 6.3125,-0.75 0.7209,-0.21833 1.6997,-0.4477 2.3438,-0.9375 1.938,0.34999 3.7688,0.45438 5.2187,0.3125 3.1487,-0.3081 5.1758,-0.47325 7.1875,-0.65625 2.0116,-0.18299 2.5142,-0.83802 3.625,-0.9375 1.1523,-0.10323 2.2922,0.38483 6.375,0 4.0829,-0.38482 5.5887,-0.501 6.3125,-0.71875 0.7393,-0.22243 1.7956,-0.51449 2.4375,-1.03125 2.0574,0.40177 4.0029,0.50333 5.5313,0.34375 3.1466,-0.32852 5.1771,-0.5227 7.1875,-0.71875 1.613,-0.15729 2.2656,-0.63148 3.0312,-0.875 0.2407,-0.088 0.4632,-0.12137 0.75,-0.15625 1.1483,-0.1397 2.3167,0.33991 6.375,-0.25 4.0583,-0.58992 5.5618,-0.77714 6.2813,-1.03125 0.7167,-0.25316 1.6745,-0.55807 2.3125,-1.09375 1.9197,0.21194 3.7199,0.15141 5.1562,-0.0937 3.1191,-0.5324 5.1116,-0.92861 7.0938,-1.3125 1.9821,-0.38387 2.4743,-1.03965 3.5625,-1.28125 1.1288,-0.25066 2.2703,0.11629 6.25,-0.875 3.9796,-0.99128 5.4296,-1.4193 6.125,-1.78125 0.7223,-0.37601 1.7619,-0.87058 2.375,-1.53125 1.963,-0.012 3.7937,-0.29105 5.2187,-0.84375 2.9512,-1.14461 4.8732,-1.86942 6.6875,-2.75 1.4557,-0.70653 2.3348,-1.68641 2.5469,-1.98438 0.2122,-0.29796 0.1118,-0.7453 0.1379,-0.76675 0.043,-0.0352 0.3193,-0.085 0.479,-0.42844 0.8589,-1.84708 2.321,-5.64459 2.4352,-6.32945 0.1137,-0.68216 0.1638,-1.34774 0.2145,-1.74497 0.029,-0.22952 -0.1467,-0.86544 -0.1246,-0.92404 0.031,-0.0821 0.3045,-0.26528 0.3599,-0.51471 0.2663,-1.19833 0.089,-2.19129 -0.1251,-3.60893 -0.214,-1.41764 -0.9837,-4.62214 -1.6369,-5.47626 -0.6589,-0.86172 -1.2229,-1.01117 -1.7479,-1.00066 -0.2086,0.26976 0.1368,0.26309 0.1626,0.31261 0.6806,0.0508 0.934,0.36864 1.4192,0.89662 0.4852,0.52798 1.2218,3.85117 1.3584,5.30156 0.1366,1.45039 0.19,2.8602 -0.088,3.46864 -0.2781,0.60845 -0.7232,0.51703 -1.0156,0.58291 0.531,0.18589 0.6698,0.12483 0.7314,0.96929 0.059,0.81338 -0.1332,1.63969 -0.5198,2.80562 -0.3912,1.18001 -1.8452,4.34998 -2.2857,4.59877 -0.4523,0.25551 -0.7314,0.27038 -1.067,0.13944 z"
- id="path8181"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter7297);enable-background:new"
- d="m 988.75,-263.84375 c 1.91161,0.6344 4.55027,1.75841 6.125,2.8125 1.57477,1.05409 2.8961,1.48252 5.5313,3.375 2.6082,1.87314 5.0269,3.01522 7.3125,4.0625 2.4693,1.13147 5.7521,2.15474 9.5312,3.9375 -1.2072,-1.2584 -7.139,-3.36445 -9.0312,-4.1875 -1.8922,-0.82304 -4.128,-1.93049 -6.9375,-3.78125 -2.80961,-1.85075 -3.62224,-2.48154 -6.00005,-3.71875 -2.37782,-1.23719 -4.07988,-1.9492 -6.53125,-2.5 z"
- id="path8183"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter7301);enable-background:new"
- d="m 957.5,-260.78125 c 1.91,0.6181 4.58288,1.70934 6.15625,2.75 1.57339,1.04066 2.89608,1.48252 5.53125,3.375 2.60823,1.87315 5.02692,3.01521 7.3125,4.0625 2.46931,1.13147 5.75213,2.15475 9.53125,3.9375 -1.20728,-1.2584 -7.20154,-3.3957 -9.09375,-4.21875 -1.89217,-0.82304 -4.09666,-1.9305 -6.90625,-3.78125 -2.80958,-1.85075 -3.59295,-2.43932 -5.96875,-3.65625 -2.37578,-1.21691 -4.11321,-1.93885 -6.5625,-2.46875 z"
- id="path8185"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter7305);enable-background:new"
- d="m 926.09375,-257.375 c 1.90772,0.59745 4.55348,1.66384 6.125,2.6875 1.5715,1.02365 2.87022,1.43971 5.5,3.28125 2.60291,1.82273 5.02887,2.9722 7.3125,4 2.4672,1.11041 5.75535,2.09323 9.53125,3.84375 -1.20623,-1.2481 -7.1719,-3.31809 -9.0625,-4.125 -1.89058,-0.8069 -4.10242,-1.89104 -6.90625,-3.6875 -2.80385,-1.79644 -3.62704,-2.40251 -6,-3.59375 -2.37297,-1.19124 -4.05362,-1.90283 -6.5,-2.40625 z"
- id="path8187"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter7309);enable-background:new"
- d="m 894.90625,-253.5625 c 1.90213,0.55355 4.58701,1.58887 6.15625,2.59375 1.56923,1.00487 2.87401,1.40864 5.5,3.21875 2.59912,1.79164 5.00034,2.87189 7.28125,3.875 2.46428,1.08374 5.75984,2.04029 9.53125,3.75 -1.2048,-1.23507 -7.17416,-3.24478 -9.0625,-4.03125 -1.88832,-0.78647 -4.0752,-1.8308 -6.875,-3.59375 -2.79977,-1.76294 -3.59919,-2.36836 -5.96875,-3.53125 -2.36957,-1.16288 -4.12325,-1.83412 -6.5625,-2.28125 z"
- id="path8189"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter7313);enable-background:new"
- d="m 863.71875,-248.65625 c 1.88062,0.42909 4.50427,1.38038 6.0625,2.3125 1.55823,0.93211 2.85233,1.25776 5.46875,3 2.58971,1.72444 4.98067,2.70802 7.25,3.625 2.45176,0.99069 5.73959,1.87707 9.5,3.5 -1.20131,-1.20734 -7.15249,-3.06609 -9.03125,-3.78125 -1.87875,-0.71517 -4.0854,-1.68442 -6.875,-3.375 -2.78963,-1.69057 -3.58461,-2.22822 -5.9375,-3.28125 -2.35292,-1.05301 -4.02584,-1.71248 -6.4375,-2 z"
- id="path8191"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter7317);enable-background:new"
- d="m 833.15625,-241.375 c 1.84836,0.29644 4.46945,0.97632 6,1.78125 1.53058,0.80493 2.81374,1.05573 5.375,2.53125 2.53504,1.46046 4.89068,2.32509 7.125,3.0625 2.41399,0.79668 5.65711,1.46689 9.375,2.84375 -1.18771,-1.12873 -7.08772,-2.58975 -8.9375,-3.15625 -1.84977,-0.5665 -4.00342,-1.37392 -6.75,-2.84375 -2.74657,-1.46983 -3.50136,-1.92028 -5.8125,-2.78125 -2.31115,-0.86095 -4.00471,-1.32009 -6.375,-1.4375 z"
- id="path8193"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter7321);enable-background:new"
- d="m 802.90625,-232.3125 c 1.8222,0.21127 4.36576,0.80057 5.875,1.53125 1.50925,0.73066 2.75568,0.92998 5.28125,2.28125 2.49976,1.33746 4.83154,2.04843 7.03125,2.65625 2.37653,0.65667 5.56464,1.07288 9.21875,2.1875 -1.16735,-1.04496 -6.92888,-2.10329 -8.75,-2.5625 -1.82111,-0.45921 -3.95225,-1.12696 -6.65625,-2.4375 -2.70403,-1.31052 -3.47106,-1.7199 -5.75,-2.46875 -2.27895,-0.74883 -3.91325,-1.17931 -6.25,-1.1875 z"
- id="path8195"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter7329);enable-background:new"
- d="m 773.1875,-222.1875 c 1.81109,0.1787 4.32059,0.66506 5.8125,1.34375 1.49194,0.67869 2.7534,0.79822 5.25,2.0625 2.47107,1.25138 4.79005,1.89614 6.96875,2.4375 2.35387,0.58488 5.49134,0.89752 9.09375,1.84375 -1.15084,-0.99116 -6.85251,-1.7833 -8.65625,-2.1875 -1.80372,-0.4042 -3.91553,-1.02116 -6.59375,-2.25 -2.67818,-1.22884 -3.40345,-1.61089 -5.65625,-2.28125 -2.25279,-0.67034 -3.89627,-1.00232 -6.21875,-0.96875 z"
- id="path8197"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter7325);enable-background:new"
- d="m 743.5625,-211.1875 c 1.79281,0.12911 4.27313,0.54965 5.75,1.1875 1.4769,0.63785 2.7161,0.74156 5.1875,1.9375 2.44618,1.18372 4.72054,1.74666 6.875,2.21875 2.32767,0.51003 5.4196,0.68064 9,1.5625 -1.14379,-0.9706 -6.74759,-1.59065 -8.53125,-1.9375 -1.78367,-0.34684 -3.88285,-0.88756 -6.53125,-2.03125 -2.64841,-1.14368 -3.39495,-1.51631 -5.625,-2.125 -2.23008,-0.60868 -3.82594,-0.90966 -6.125,-0.8125 z"
- id="path8199"
- inkscape:connector-curvature="0" />
- </g>
- </g>
- <path
- sodipodi:nodetypes="ccccccccc"
- id="path8201"
- d="m 863.87812,475.6679 c 1.64212,-3.218 3.51781,-5.73529 4.86136,-9.84898 0.79872,-3.65789 3.31204,-2.03073 7.26047,-8.3969 1.40193,-2.2395 5.47653,0.39136 8.9651,-2.39911 1.27072,-0.80319 2.88488,-0.40431 4.48256,-0.0631 3.76539,1.31896 5.82576,3.70355 8.33376,5.80837 6.13906,5.97023 20.53414,7.94327 23.48604,6.31346 1.43405,-2.90474 7.88128,-5.40888 12.37437,-11.11168 0.74811,-1.12267 11.72936,-8.74446 14.64721,-6.56599"
- style="display:inline;opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- inkscape:connector-curvature="0" />
- <path
- sodipodi:nodetypes="ccccccccccc"
- id="path8203"
- d="m 888.50059,465.25071 c 7.36341,-3.23297 13.8109,-8.9084 20.70813,-13.38452 3.31057,-1.96954 6.86983,3.21601 10.796,3.59866 2.29773,-0.21813 3.7129,1.20259 5.68211,1.6415 5.15636,1.31779 2.39793,3.86488 9.97526,6.43972 6.15561,1.7204 8.9074,-6.79847 14.89975,-7.3236 4.87739,-0.50299 8.09892,-0.31603 11.61675,-0.25254 3.92696,0.13889 4.07855,-3.4976 6.06092,-5.3033 2.98056,-2.80522 7.15561,-1.84972 10.14485,-4.7409 1.01754,-1.38468 1.95458,-3.01085 2.73459,-5.10809 0.88201,-2.00034 3.04006,0.30598 4.79823,1.26269"
- style="display:inline;opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- inkscape:connector-curvature="0" />
- <path
- id="path8994"
- d="m 403.27922,1056.3058 56.56854,-42.4264 72.12489,14.1421 -46.66904,52.3259 -53.74012,7.0711 -28.28427,-31.1127 z"
- style="display:inline;overflow:visible;visibility:visible;opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter9048);enable-background:accumulate"
- inkscape:connector-curvature="0" />
- <path
- sodipodi:nodetypes="czzzzzzcccccccccczczz"
- id="path4189"
- d="m 542.27183,1060.5719 c -1.40727,18.8012 -1.1449,32.751 2.08174,49.3033 3.22666,16.5523 16.40609,45.9073 20.33441,63.1837 3.92621,17.2671 2.69413,38.3097 -12.45944,51.1483 -15.31761,12.9774 -42.05128,21.5989 -67.83231,15.7337 -25.78105,-5.8652 -69.54907,-49.2234 -88.59019,-70.2283 -19.11214,-21.0833 -63.76086,-93.8506 -77.93853,-124.2758 -14.17767,-30.4251 -12.65961,-36.7186 -8.11972,-45.52972 -9.36672,-24.5205 -12.41371,-50.06681 -33.71245,-75.57664 30.32547,3.11444 43.88028,26.95633 60.12568,47.13975 -5.52989,-48.07603 -18.05471,-64.4165 -28.37395,-90.7243 29.9943,6.08165 50.57936,31.87239 63.97979,72.7125 9.55415,-3.91791 18.23776,-9.37294 30.18741,-9.0612 -11.2975,-41.6958 -17.94946,-69.91584 -36.68725,-101.06994 53.44196,5.67033 83.65702,80.63932 78.97142,87.9608 9.97797,-2.24399 19.00565,-6.53038 30.43653,-5.65167 -11.24897,-38.34702 -21.04781,-76.8679 -3.65971,-118.64819 0,0 48.28678,65.43688 54.38966,85.80578 6.10287,20.3689 1.51881,38.70051 1.51881,38.70051 0,0 16.95957,31.0853 20.29392,51.09414 3.3731,20.24138 -3.53269,59.10328 -4.94582,77.98328 z"
- style="display:inline;opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- inkscape:connector-curvature="0" />
- <path
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,995.28646,23.53493)"
- clip-path="url(#clipPath3631)"
- sodipodi:nodetypes="cccccccccccccccccccccc"
- id="path4191"
- d="m 719.5,738.69519 18.31177,15.43196 44.41103,-15.38821 23.2772,-25.54375 11.46397,19.22065 30.67161,12.78354 25.09737,5.72837 L 892,723.19519 908.02309,747.02126 947,752.19519 l 10.24541,-6.19852 6.75471,8.6982 25.49988,11.00032 2,-40.5 L 955.94866,710.6576 923.45591,689.1305 883.0038,677.66492 861.69668,662.13148 840,685.19519 755.02878,638.61208 722,676.69519 l -2.5,62 z"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter3587);enable-background:accumulate"
- inkscape:connector-curvature="0" />
- <path
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,822.28931,10.93589)"
- sodipodi:nodetypes="ccssscsssssssssssssccccscccccccccsscccccccccccssscccccccccccccccsccccssssssssssssscccsssc"
- clip-path="url(#clipPath3677)"
- id="path4193"
- d="m 584,696.5 -6.5625,17.15625 c 0,0 -7.81152,20.36488 -15.6875,43.65625 -3.93799,11.64568 -7.88302,24.04145 -10.9375,35.125 -3.05448,11.08355 -5.33586,20.37986 -5.5,28.28125 -0.39807,19.16196 5.74653,34.8883 8.9375,41.75 -0.77153,3.55523 -1.99137,9.45432 -3.34375,18.09375 -1.92042,12.26821 -3.71827,27.15441 -2.375,39.875 1.38209,13.08835 6.81222,28.18765 12.59375,43.03125 5.78153,14.8436 12.05435,29.22711 15.21875,38.03125 6.63206,18.4519 9.99296,31.5763 11.3125,48.5 0.58135,7.4561 -0.24227,20.336 -1.25,33.375 -1.00773,13.039 -2.18661,26.3014 -1.6875,36.9688 0.98911,21.1398 9.32798,46.8347 33.375,57.9374 22.77483,10.5154 55.32682,11.7022 83.4375,-3.4374 16.15992,-8.7034 30.07634,-27.0976 43.375,-46.9063 13.29866,-19.8087 24.96917,-41.0534 31.9375,-54.9063 15.35292,-30.5212 39.39353,-115.46418 45.625,-152.7187 3.01859,-18.04653 3.92166,-29.06555 2.625,-38.03125 -0.97853,-6.76604 -3.82819,-12.1474 -6.875,-16.21875 2.04274,-27.50791 -0.73207,-51.36878 11.96875,-79.40625 L 840.75,763.375 l -23.8125,9.3125 c -17.48975,6.83753 -28.90164,19.04536 -36.59375,32.0625 -0.32251,0.54577 -0.56314,1.10776 -0.875,1.65625 0.22203,-22.51521 4.40784,-37.63759 6.59375,-58.6875 l 1.96875,-19 L 771,737.375 c -30.59449,15.55571 -45.69489,48.19321 -49.71875,90.21875 -4.24532,-0.62547 -8.8314,-1.01965 -13.8125,-0.84375 -0.29149,-39.18036 -0.39629,-67.03685 8.59375,-99.375 l 5.59375,-20.125 -19.4375,7.65625 c -30.90937,12.20394 -47.85954,41.93073 -56.625,68.375 -4.38273,13.22214 -6.74582,25.80121 -7.59375,35.9375 -0.23203,2.77373 -0.31106,5.31132 -0.3125,7.71875 -3.24187,-0.0364 -6.42052,0.13589 -10.0625,0.5 0.0416,-39.00473 -3.48424,-79.75415 -32.28125,-116.5 L 584,696.5 Z m 5.8125,43.8125 c 16.80691,30.64383 17.47451,63.96728 16.9375,99.75 l -0.21875,15.0625 12.03493,-6.53921 c 8.66205,-3.13302 19.56058,-0.22752 31.93382,-0.83579 l 14.67465,9.3566 -6.3309,-25.7941 c -0.0897,-0.22997 -0.22046,-0.41669 -0.25,-0.71875 -0.19951,-2.03986 -0.22232,-5.47307 0.125,-9.625 0.69464,-8.30386 2.78957,-19.58524 6.625,-31.15625 5.15532,-15.55294 13.48801,-31.19248 25.125,-42.53125 -4.68381,28.63798 -3.21559,60.25934 -3.01164,95.80514 l -2.76593,13.26164 15.49632,-7.59803 c 9.0294,-2.75771 17.18897,-0.34996 29.28125,1.09375 l 13.24632,9.44423 L 741.09375,840 c 1.44793,-30.97177 8.22149,-53.67808 20.71875,-68.875 -2.98688,19.77884 -5.43043,41.7848 0.3125,78.34375 l 1.06552,6.37318 -2.93815,11.51685 10.61711,-8.16818 9.18973,10.22198 -1.54828,-10.4636 L 781.9375,852 c 5.70102,-13.21149 10.17282,-26.21337 16.34375,-36.65625 0.95986,-1.62434 2.03153,-3.06436 3.0625,-4.5625 -3.68066,21.15535 -2.42716,40.20815 -4.09375,57.78125 l -4.68014,7.80698 7.39889,0.22427 c 3.22005,3.48361 3.8675,3.85068 4.5625,8.65625 0.695,4.80557 0.31862,14.40035 -2.5625,31.625 -5.56799,33.28792 -31.84562,77.83981 -43.7404,101.4864 -6.60491,13.1304 -18.52833,57.4859 -31.12335,76.2465 -12.59502,18.7605 -28.53137,39.7673 -37.17204,44.4209 -21.49052,11.5742 -44.55594,25.5059 -60.61889,18.0895 -14.37486,-6.637 -23.03969,-21.1927 -23.81407,-37.7433 -0.38311,-8.188 0.61279,-21.3092 1.625,-34.4062 1.01221,-13.0971 11.28891,-22.5708 15.42339,-36.5626 5.37229,-18.1808 -1.44687,-36.5944 -12.5,-53.93745 -6.48655,-10.17778 -23.9768,-24.2579 -29.54839,-38.5625 -5.57159,-14.3046 -10.36751,-29.00315 -11.28125,-37.65625 -0.92621,-8.77113 0.4225,-23.02502 2.21875,-34.5 1.79625,-11.47497 3.84375,-20.28125 3.84375,-20.28125 l 9.42278,-3.6152 -10.48528,-3.8848 c 0,0 -8.49889,-15.3101 -8.09375,-34.8125 0.0711,-3.42316 1.83626,-12.72805 4.71875,-23.1875 2.88249,-10.45945 6.76466,-22.55271 10.625,-33.96875 3.04439,-9.00308 5.78063,-16.60345 8.34375,-23.6875 z"
- style="display:inline;opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;filter:url(#filter3898);enable-background:new"
- inkscape:connector-curvature="0" />
- <g
- transform="translate(276,136)"
- clip-path="url(#clipPath3622)"
- id="g3617"
- style="display:inline;enable-background:new">
- <path
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter9024);enable-background:accumulate"
- d="m -15.66751,843.48852 -49.49748,-15.55635 -26.87005,52.3259 41.01219,45.25484 49.49747,-38.18377 -14.14213,-43.84062 z"
- id="path4195"
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,-52.200498,74.09707)"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter9020);enable-background:accumulate"
- d="m 118.70648,859.93048 -55.154328,-46.66904 -43.84062,36.76955 33.94113,53.74011 -13.596814,85.46203 -39.44536579,28.29217 -41.01220021,11.3137 -2.82842,46.669 56.56854,25.4559 18.943987,-69.65 23.45655,-58.85663 46.347541,-72.61491 16.62,-39.91188 z"
- id="path4197"
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,-46.92842,75.511284)"
- sodipodi:nodetypes="ccccccccccccc"
- inkscape:connector-curvature="0" />
- </g>
- <path
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,229.07158,211.51128)"
- id="path4199"
- d="m -70.82184,932.58397 60.81118,-26.87005 100.40916,31.1127 -63.63961,31.11269 -82.02438,-16.97056 -15.55635,-18.38478 z"
- style="display:inline;overflow:visible;visibility:visible;opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter9044);enable-background:accumulate"
- inkscape:connector-curvature="0" />
- <path
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,822.28931,10.93589)"
- clip-path="url(#clipPath4177)"
- sodipodi:nodetypes="ccccccccccccccccccccccccccccccccccccccccccccccccccczzzcccccc"
- id="path4201"
- d="m 583.0625,715.75 c -12.10609,34.44974 -26.7145,68.53333 -31.75,104.84375 -0.83208,14.92867 4.58915,29.15943 8.84375,43.0625 -5.91624,27.20126 -10.13681,56.89995 1.15625,83.125 13.51717,38.16085 35.00147,75.68215 32.42279,117.46825 -0.9483,29.2942 -9.01444,60.9941 5.38971,88.2817 10.19864,19.3348 33.13956,27.3117 53.96785,27.6676 27.86219,1.1741 56.46261,-11.6216 72.0009,-35.2613 22.59549,-29.3717 41.80051,-61.4973 55.23865,-96.0598 16.89053,-45.506 29.6718,-92.56072 37.93402,-140.3989 1.8244,-12.94106 3.10108,-27.46985 -4.57892,-38.82255 -3.43115,-7.33632 0.0421,-15.56014 -0.68457,-23.30977 0.674,-24.99466 4.01232,-50.66376 16.65332,-72.59648 -17.73313,6.4446 -35.07268,16.55971 -44.00307,33.86425 -3.93508,6.70955 -7.60482,13.57413 -11.37193,20.38575 -3.54999,-30.01408 3.71963,-59.64828 6.78125,-89.28125 -20.16604,9.05463 -36.87672,25.65522 -44.17495,46.682 -6.30463,15.58003 -8.80222,32.31718 -10.26255,49.03675 -8.25334,-1.51925 -16.68447,-2.10155 -25.0625,-1.5 -0.96308,-38.69787 -0.46696,-79.40715 10.96875,-115.90625 -18.68113,6.21776 -35.16621,18.73551 -45.62803,35.38723 -13.85254,20.87979 -21.2614,45.75395 -23.05947,70.61277 0.58534,4.32454 -0.0613,11.84009 -6.34375,9.875 -5.33118,0.0176 -10.62908,0.67883 -15.9375,1.09375 1.14784,-39.38148 -3.34144,-81.6282 -27.0625,-114.21875 -3.06071,-3.63717 -5.63685,-7.68438 -8.625,-11.34375 -0.9375,2.4375 -1.875,4.875 -2.8125,7.3125 z m 7.75,13.84375 c 18.56527,29.29629 22.4825,64.82012 22.125,98.875 0.20409,5.17526 -0.51656,11.8292 0.125,16.0625 12.31856,-6.10275 26.73912,-2.4399 39.78125,-2.1875 2.31712,1.22325 3.1921,1.65243 1.90625,-1.40625 -4.16455,-13.95285 -1.84828,-28.613 1.80504,-42.40764 6.36687,-26.29064 20.62828,-51.08798 42.81996,-67.02986 -8.61709,37.23706 -5.71658,76.56161 -6.09375,113.96875 12.25344,-6.9099 27.27879,-3.44613 40.03125,-0.25 3.39222,3.5348 2.28935,-0.72948 2.1875,-3.8125 -0.48309,-21.37058 4.13133,-43.06963 13.6875,-62.15625 5.96266,-10.68727 14.24338,-19.80379 22.4375,-28.875 -7.87156,33.8381 -9.2029,69.33593 -2.71875,103.5 1.72485,-1.41118 4.60681,-0.45414 5.65625,-0.375 9.68369,-21.23682 16.35112,-45.38062 34.89016,-60.74185 1.87329,-0.37122 -1.44818,8.52495 -1.48391,11.8981 -3.53488,21.84581 -7.17516,44.14234 -8.78421,66.21911 -8.78379,2.34171 2.84835,2.32354 3.46875,4.0625 7.92311,10.5658 4.66299,24.40472 3.63165,36.35334 -7.06405,45.03355 -22.14231,87.36194 -35.95355,130.6798 -12.07476,32.9493 -27.3742,58.8525 -47.88808,87.2015 -10.95257,13.5514 -23.24472,27.8513 -40.84375,32.5 -20.15601,6.2413 -44.20676,10.8769 -62.59956,0.046 -17.28966,-12.3414 -21.02393,-35.7089 -19.26226,-55.6864 0.0488,-15.8262 4.93886,-28.5121 4.4106,-43.4918 -0.53824,-15.2629 -2.29135,-30.5647 -6.54261,-46.8663 -4.25126,-16.30162 -9.04325,-24.91794 -16.11906,-41.57338 -7.24111,-17.04456 -15.07015,-36.74863 -18.20542,-56.28842 -1.74948,-18.62714 2.89171,-37.12262 5.78125,-55.25 3.29623,-2.83696 -1.59799,-5.19659 -2.3125,-8.1875 -7.60113,-17.01508 -8.40747,-36.7749 -2.74234,-54.55998 7.1302,-25.0723 15.76087,-49.63241 24.67984,-74.12752 0.70833,1.30208 1.41667,2.60417 2.125,3.90625 z"
- style="display:inline;opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;filter:url(#filter4105);enable-background:new"
- inkscape:connector-curvature="0" />
- <path
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,995.28646,23.53493)"
- clip-path="url(#clipPath3631)"
- sodipodi:nodetypes="cccccccc"
- id="path4203"
- d="m 735.05635,733.03834 2.75542,21.08881 44.41103,-15.38821 4.85063,-22.38975 -3.93617,-22.05222 -22.45163,-36.59301 -8.28004,30.30494 -17.34924,45.02944 z"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter4130);enable-background:accumulate"
- inkscape:connector-curvature="0" />
- <path
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,995.28646,23.53493)"
- clip-path="url(#clipPath3631)"
- sodipodi:nodetypes="cccccccc"
- id="path4205"
- d="m 831.81321,730.29452 15.82237,14.90486 20.85473,2.89994 -1.59029,-39.92598 8.32561,-30.50842 -7.16499,-6.34106 -21.69669,20.9424 -14.55074,38.02826 z"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter4141);enable-background:accumulate"
- inkscape:connector-curvature="0" />
- <g
- transform="translate(276,136)"
- clip-path="url(#clipPath8338)"
- style="display:inline;filter:url(#filter8333);enable-background:new"
- id="g8317">
- <path
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 964.00012,754.69487 18.42881,7.46479 9.07107,-36.96447 -14.87031,4.83886 -12.62957,24.66082 z"
- id="path4209"
- sodipodi:nodetypes="ccccc"
- clip-path="none"
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,719.28646,-112.46507)"
- inkscape:connector-curvature="0" />
- <rect
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- id="rect8315"
- width="182"
- height="177"
- x="-55"
- y="757.19519" />
- </g>
- <g
- transform="translate(276,136)"
- clip-path="url(#clipPath8359)"
- style="display:inline;filter:url(#filter8354);enable-background:new"
- id="g8346">
- <path
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 910.14441,746.31415 32.61295,5.17393 -0.36119,-23.87619 7.18853,-29.68221 -8.45112,-5.26365 -21.82194,26.51077 -9.16723,27.13735 z"
- id="path4207"
- sodipodi:nodetypes="ccccccc"
- clip-path="none"
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,719.28646,-112.46507)"
- inkscape:connector-curvature="0" />
- <rect
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- id="rect8344"
- width="165"
- height="176"
- x="-22"
- y="696.19519" />
- </g>
- <path
- sodipodi:nodetypes="czzzzzzcccccccccczczz"
- id="path8848"
- d="m 1036.164,1071.8338 c 6.7941,18.9028 10.4937,33.2997 11.8903,51.2119 1.3966,17.9123 -3.7827,51.8008 -2.9005,70.6561 0.8818,18.8452 8.1337,40.099 27.3446,48.9689 19.4189,8.9658 49.3193,10.2113 74.1199,-3.1456 24.8006,-13.357 57.401,-70.3255 70.9742,-97.3087 13.6239,-27.0839 38.7611,-114.4974 44.6608,-149.76859 5.8998,-35.27121 2.5506,-41.30077 -4.6174,-49.05549 2.6403,-27.84015 -1.4998,-54.93543 13.1096,-87.18618 -30.249,11.8257 -37.3823,40.1607 -48.3189,65.50508 -8.0009,-50.93293 0.2092,-71.27319 3.3189,-101.21936 -29.0647,14.77791 -42.8615,47.11402 -45,92.85714 -10.9239,-1.3042 -21.3914,-4.43423 -33.5714,-0.71429 -0.264,-46.02334 -1.4635,-76.88941 8.9106,-114.20649 -53.2554,21.02686 -62.9472,106.5941 -56.0535,112.77792 -10.8828,0.535 -21.371,-1.2973 -32.8571,2.85715 0.6389,-42.57135 -0.2605,-84.90861 -30,-122.85715 0,0 -30.958,80.92234 -31.4286,103.57143 -0.4705,22.64909 9.4516,40.16588 9.4516,40.16588 0,0 -8.568,36.74051 -6.2986,58.23223 2.2959,21.74142 20.4429,59.67622 27.2655,78.65812 z"
- style="display:inline;opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- inkscape:connector-curvature="0" />
- <path
- transform="translate(276,136)"
- clip-path="url(#clipPath3631)"
- sodipodi:nodetypes="cccccccccccccccccccccc"
- id="path3635"
- d="m 719.5,738.69519 18.31177,15.43196 44.41103,-15.38821 23.2772,-25.54375 11.46397,19.22065 30.67161,12.78354 25.09737,5.72837 L 892,723.19519 908.02309,747.02126 947,752.19519 l 10.24541,-6.19852 6.75471,8.6982 25.49988,11.00032 2,-40.5 L 955.94866,710.6576 923.45591,689.1305 883.0038,677.66492 861.69668,662.13148 840,685.19519 755.02878,638.61208 722,676.69519 l -2.5,62 z"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter3587);enable-background:accumulate"
- inkscape:connector-curvature="0" />
- <path
- sodipodi:nodetypes="ccssscsssssssssssssccccscccccccccsscccccccccccssscccccccccccccccsccccssssssssssssscccsssc"
- clip-path="url(#clipPath3677)"
- id="path3669"
- d="m 584,696.5 -6.5625,17.15625 c 0,0 -7.81152,20.36488 -15.6875,43.65625 -3.93799,11.64568 -7.88302,24.04145 -10.9375,35.125 -3.05448,11.08355 -5.33586,20.37986 -5.5,28.28125 -0.39807,19.16196 5.74653,34.8883 8.9375,41.75 -0.77153,3.55523 -1.99137,9.45432 -3.34375,18.09375 -1.92042,12.26821 -3.71827,27.15441 -2.375,39.875 1.38209,13.08835 6.81222,28.18765 12.59375,43.03125 5.78153,14.8436 12.05435,29.22711 15.21875,38.03125 6.63206,18.4519 9.99296,31.5763 11.3125,48.5 0.58135,7.4561 -0.24227,20.336 -1.25,33.375 -1.00773,13.039 -2.18661,26.3014 -1.6875,36.9688 0.98911,21.1398 9.32798,46.8347 33.375,57.9374 22.77483,10.5154 55.32682,11.7022 83.4375,-3.4374 16.15992,-8.7034 30.07634,-27.0976 43.375,-46.9063 13.29866,-19.8087 24.96917,-41.0534 31.9375,-54.9063 15.35292,-30.5212 39.39353,-115.46418 45.625,-152.7187 3.01859,-18.04653 3.92166,-29.06555 2.625,-38.03125 -0.97853,-6.76604 -3.82819,-12.1474 -6.875,-16.21875 2.04274,-27.50791 -0.73207,-51.36878 11.96875,-79.40625 L 840.75,763.375 l -23.8125,9.3125 c -17.48975,6.83753 -28.90164,19.04536 -36.59375,32.0625 -0.32251,0.54577 -0.56314,1.10776 -0.875,1.65625 0.22203,-22.51521 4.40784,-37.63759 6.59375,-58.6875 l 1.96875,-19 L 771,737.375 c -30.59449,15.55571 -45.69489,48.19321 -49.71875,90.21875 -4.24532,-0.62547 -8.8314,-1.01965 -13.8125,-0.84375 -0.29149,-39.18036 -0.39629,-67.03685 8.59375,-99.375 l 5.59375,-20.125 -19.4375,7.65625 c -30.90937,12.20394 -47.85954,41.93073 -56.625,68.375 -4.38273,13.22214 -6.74582,25.80121 -7.59375,35.9375 -0.23203,2.77373 -0.31106,5.31132 -0.3125,7.71875 -3.24187,-0.0364 -6.42052,0.13589 -10.0625,0.5 0.0416,-39.00473 -3.48424,-79.75415 -32.28125,-116.5 L 584,696.5 Z m 5.8125,43.8125 c 16.80691,30.64383 17.47451,63.96728 16.9375,99.75 l -0.21875,15.0625 12.03493,-6.53921 c 8.66205,-3.13302 19.56058,-0.22752 31.93382,-0.83579 l 14.67465,9.3566 -6.3309,-25.7941 c -0.0897,-0.22997 -0.22046,-0.41669 -0.25,-0.71875 -0.19951,-2.03986 -0.22232,-5.47307 0.125,-9.625 0.69464,-8.30386 2.78957,-19.58524 6.625,-31.15625 5.15532,-15.55294 13.48801,-31.19248 25.125,-42.53125 -4.68381,28.63798 -3.21559,60.25934 -3.01164,95.80514 l -2.76593,13.26164 15.49632,-7.59803 c 9.0294,-2.75771 17.18897,-0.34996 29.28125,1.09375 l 13.24632,9.44423 L 741.09375,840 c 1.44793,-30.97177 8.22149,-53.67808 20.71875,-68.875 -2.98688,19.77884 -5.43043,41.7848 0.3125,78.34375 l 1.06552,6.37318 -2.93815,11.51685 10.61711,-8.16818 9.18973,10.22198 -1.54828,-10.4636 L 781.9375,852 c 5.70102,-13.21149 10.17282,-26.21337 16.34375,-36.65625 0.95986,-1.62434 2.03153,-3.06436 3.0625,-4.5625 -3.68066,21.15535 -2.42716,40.20815 -4.09375,57.78125 l -4.68014,7.80698 7.39889,0.22427 c 3.22005,3.48361 3.8675,3.85068 4.5625,8.65625 0.695,4.80557 0.31862,14.40035 -2.5625,31.625 -5.56799,33.28792 -31.79272,123.1659 -43.6875,146.8125 -6.60491,13.1304 -18.02998,33.8957 -30.625,52.6563 -12.59502,18.7605 -27.35933,35.5338 -36,40.1874 -21.49052,11.5742 -48.7808,10.2602 -64.84375,2.8438 -14.37486,-6.637 -20.53812,-23.4494 -21.3125,-40 -0.38311,-8.188 0.61279,-21.3092 1.625,-34.4062 1.01221,-13.0971 11.28891,-22.5708 15.42339,-36.5626 5.37229,-18.1808 -1.44687,-36.5944 -12.5,-53.93745 -6.48655,-10.17778 -23.9768,-24.2579 -29.54839,-38.5625 -5.57159,-14.3046 -10.36751,-29.00315 -11.28125,-37.65625 -0.92621,-8.77113 0.4225,-23.02502 2.21875,-34.5 1.79625,-11.47497 3.84375,-20.28125 3.84375,-20.28125 l 9.42278,-3.6152 -10.48528,-3.8848 c 0,0 -8.49889,-15.3101 -8.09375,-34.8125 0.0711,-3.42316 1.83626,-12.72805 4.71875,-23.1875 2.88249,-10.45945 6.76466,-22.55271 10.625,-33.96875 3.04439,-9.00308 5.78063,-16.60345 8.34375,-23.6875 z"
- style="display:inline;opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;filter:url(#filter3898);enable-background:new"
- transform="translate(450.03125,73.843964)"
- inkscape:connector-curvature="0" />
- <g
- transform="translate(276,136)"
- clip-path="url(#clipPath3636)"
- id="g3628">
- <path
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter9024);enable-background:accumulate"
- d="m 824.48651,818.48242 -49.49748,-15.55635 -26.87005,52.3259 41.01219,45.25484 49.49747,-38.18377 -14.14213,-43.84062 z"
- id="path8988"
- inkscape:connector-curvature="0" />
- <path
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter9020);enable-background:accumulate"
- d="m 964.49365,855.25197 -55.15433,-46.66904 -43.84062,36.76955 33.94113,53.74011 7.07106,66.46804 -50.91168,35.35537 -41.0122,11.3137 -2.82842,46.669 56.56854,25.4559 63.63961,-76.3676 24.04163,-94.75227 8.48528,-57.98276 z"
- id="path8990"
- inkscape:connector-curvature="0" />
- </g>
- <path
- id="path8992"
- d="m 1045.3322,1043.5779 60.8112,-26.8701 100.4091,31.1127 -63.6396,31.1127 -82.0244,-16.9706 -15.5563,-18.3847 z"
- style="display:inline;overflow:visible;visibility:visible;opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter9044);enable-background:accumulate"
- inkscape:connector-curvature="0" />
- <path
- clip-path="url(#clipPath4177)"
- sodipodi:nodetypes="ccccccccccccccccccccccccccccccccccccccccccccccccccczzzcccccc"
- id="path4149"
- d="m 583.0625,715.75 c -12.10609,34.44974 -26.7145,68.53333 -31.75,104.84375 -0.83208,14.92867 4.58915,29.15943 8.84375,43.0625 -5.91624,27.20126 -10.13681,56.89995 1.15625,83.125 13.51717,38.16085 35.00147,75.68215 32.42279,117.46825 -0.9483,29.2942 -9.01444,60.9941 5.38971,88.2817 10.19864,19.3348 33.13956,27.3117 53.96785,27.6676 27.86219,1.1741 56.46261,-11.6216 72.0009,-35.2613 22.59549,-29.3717 41.80051,-61.4973 55.23865,-96.0598 16.89053,-45.506 29.6718,-92.56072 37.93402,-140.3989 1.8244,-12.94106 3.10108,-27.46985 -4.57892,-38.82255 -3.43115,-7.33632 0.0421,-15.56014 -0.68457,-23.30977 0.674,-24.99466 4.01232,-50.66376 16.65332,-72.59648 -17.73313,6.4446 -35.07268,16.55971 -44.00307,33.86425 -3.93508,6.70955 -7.60482,13.57413 -11.37193,20.38575 -3.54999,-30.01408 3.71963,-59.64828 6.78125,-89.28125 -20.16604,9.05463 -36.87672,25.65522 -44.17495,46.682 -6.30463,15.58003 -8.80222,32.31718 -10.26255,49.03675 -8.25334,-1.51925 -16.68447,-2.10155 -25.0625,-1.5 -0.96308,-38.69787 -0.46696,-79.40715 10.96875,-115.90625 -18.68113,6.21776 -35.16621,18.73551 -45.62803,35.38723 -13.85254,20.87979 -21.2614,45.75395 -23.05947,70.61277 0.58534,4.32454 -0.0613,11.84009 -6.34375,9.875 -5.33118,0.0176 -10.62908,0.67883 -15.9375,1.09375 1.14784,-39.38148 -3.34144,-81.6282 -27.0625,-114.21875 -3.06071,-3.63717 -5.63685,-7.68438 -8.625,-11.34375 -0.9375,2.4375 -1.875,4.875 -2.8125,7.3125 z m 7.75,13.84375 c 18.56527,29.29629 22.4825,64.82012 22.125,98.875 0.20409,5.17526 -0.51656,11.8292 0.125,16.0625 12.31856,-6.10275 26.73912,-2.4399 39.78125,-2.1875 2.31712,1.22325 3.1921,1.65243 1.90625,-1.40625 -4.16455,-13.95285 -1.84828,-28.613 1.80504,-42.40764 6.36687,-26.29064 20.62828,-51.08798 42.81996,-67.02986 -8.61709,37.23706 -5.71658,76.56161 -6.09375,113.96875 12.25344,-6.9099 27.27879,-3.44613 40.03125,-0.25 3.39222,3.5348 2.28935,-0.72948 2.1875,-3.8125 -0.48309,-21.37058 4.13133,-43.06963 13.6875,-62.15625 5.96266,-10.68727 14.24338,-19.80379 22.4375,-28.875 -7.87156,33.8381 -9.2029,69.33593 -2.71875,103.5 1.72485,-1.41118 4.60681,-0.45414 5.65625,-0.375 9.68369,-21.23682 16.35112,-45.38062 34.89016,-60.74185 1.87329,-0.37122 -1.44818,8.52495 -1.48391,11.8981 -3.53488,21.84581 -3.2972,44.17323 -4.90625,66.25 -1.31238,1.37679 2.84835,2.32354 3.46875,4.0625 7.92311,10.5658 3.12294,24.83149 2.0916,36.78011 -7.06405,45.03355 -21.76553,88.37934 -35.57677,131.69714 -12.07476,32.9493 -30.7197,63.08 -51.23358,91.429 -10.95257,13.5514 -23.24472,27.8513 -40.84375,32.5 -20.15601,6.2413 -43.57595,5.1744 -61.96875,-5.6562 -17.28966,-12.3414 -21.02393,-35.7089 -19.26226,-55.6864 0.0488,-15.8262 2.37211,-27.8008 7.91747,-42.8053 5.54535,-15.0045 2.47105,-31.3317 -1.78021,-47.6333 -4.25126,-16.3016 -12.17903,-26.26002 -21.82158,-42.20417 -9.64255,-15.94415 -17.6369,-36.03734 -20.77217,-55.57713 -1.74948,-18.62714 2.89171,-37.12262 5.78125,-55.25 3.29623,-2.83696 -1.59799,-5.19659 -2.3125,-8.1875 -7.60113,-17.01508 -8.40747,-36.7749 -2.74234,-54.55998 7.1302,-25.0723 15.76087,-49.63241 24.67984,-74.12752 0.70833,1.30208 1.41667,2.60417 2.125,3.90625 z"
- style="display:inline;opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;filter:url(#filter4185);enable-background:new"
- transform="translate(450.03125,73.843964)"
- inkscape:connector-curvature="0" />
- <path
- transform="translate(276,136)"
- clip-path="url(#clipPath3631)"
- sodipodi:nodetypes="cccccccc"
- id="path3902"
- d="m 735.05635,733.03834 2.75542,21.08881 44.41103,-15.38821 4.85063,-22.38975 -3.93617,-22.05222 -22.45163,-36.59301 -8.28004,30.30494 -17.34924,45.02944 z"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter4130);enable-background:accumulate"
- inkscape:connector-curvature="0" />
- <path
- transform="translate(276,136)"
- clip-path="url(#clipPath3631)"
- sodipodi:nodetypes="cccccccc"
- id="path4135"
- d="m 831.81321,730.29452 15.82237,14.90486 20.85473,2.89994 -1.59029,-39.92598 8.32561,-30.50842 -7.16499,-6.34106 -21.69669,20.9424 -14.55074,38.02826 z"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter4141);enable-background:accumulate"
- inkscape:connector-curvature="0" />
- <g
- transform="translate(276,136)"
- clip-path="url(#clipPath8392)"
- style="filter:url(#filter8379)"
- id="g8367">
- <path
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 910.14441,746.31415 32.61295,5.17393 -0.36119,-23.87619 7.18853,-29.68221 -8.45112,-5.26365 -21.82194,26.51077 -9.16723,27.13735 z"
- id="path4145"
- sodipodi:nodetypes="ccccccc"
- clip-path="none"
- inkscape:connector-curvature="0" />
- <rect
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- id="rect8365"
- width="123.03658"
- height="172.53406"
- x="877.51953"
- y="650.19098" />
- </g>
- <g
- transform="translate(276,136)"
- clip-path="url(#clipPath8417)"
- style="filter:url(#filter8404)"
- id="g8400">
- <path
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 964.00012,754.69487 18.42881,7.46479 9.07107,-36.96447 -14.87031,4.83886 -12.62957,24.66082 z"
- id="path4147"
- sodipodi:nodetypes="ccccc"
- clip-path="none"
- inkscape:connector-curvature="0" />
- <rect
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- id="rect8398"
- width="142.12846"
- height="125.1579"
- x="924.89569"
- y="677.06104" />
- </g>
+<?xml version="1.0" encoding="UTF-8"?>
+<svg enable-background="new" version="1" viewBox="0 0 4226.3 1686.8" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink">
+ <defs>
+ <pattern id="ig" xlink:href="#ka" patternTransform="matrix(5.4432 0 0 10.1 1722.4 161.06)"/>
+ <marker id="er" overflow="visible" orient="auto">
+ <path d="m-1.2 0l-1 1 3.5-1-3.5-1 1 1z" fill="#f8d615" fill-rule="evenodd" stroke="#f8d615" stroke-width=".2pt"/>
+ </marker>
+ <pattern id="ka" width="2" height="1" patternTransform="scale(10)" patternUnits="userSpaceOnUse">
+ <path d="M0-.5h1v2H0z" fill="#f815bb"/>
+ </pattern>
+ <filter id="ep" x="-.085" y="-.366" width="1.169" height="1.732">
+ <feGaussianBlur stdDeviation="4.574"/>
+ </filter>
+ <linearGradient id="n">
+ <stop stop-color="#fff" offset="0"/>
+ <stop stop-color="#fff" stop-opacity="0" offset="1"/>
+ </linearGradient>
+ <linearGradient id="j">
+ <stop stop-color="#f9eed3" offset="0"/>
+ <stop stop-opacity="0" offset="1"/>
+ </linearGradient>
+ <linearGradient id="s">
+ <stop stop-color="#283131" stop-opacity="0" offset="0"/>
+ <stop stop-color="#1e2424" offset=".5"/>
+ <stop offset="1"/>
+ </linearGradient>
+ <linearGradient id="u">
+ <stop stop-color="#cfc690" offset="0"/>
+ <stop stop-color="#afa775" offset=".212"/>
+ <stop stop-color="#615c3a" offset=".534"/>
+ <stop offset=".765"/>
+ <stop stop-color="#403518" offset="1"/>
+ </linearGradient>
+ <radialGradient id="jd" cx="418.3" cy="342.48" r="131.45" gradientTransform="matrix(1.3957 .62111 -.42441 .95372 -15.062 -227.97)" gradientUnits="userSpaceOnUse">
+ <stop stop-color="#283131" offset="0"/>
+ <stop stop-color="#1e2424" offset=".5"/>
+ <stop offset="1"/>
+ </radialGradient>
+ <filter id="iz" x="-.3" y="-.3" width="1.6" height="1.6">
+ <feGaussianBlur stdDeviation="2"/>
+ </filter>
+ <clipPath id="ea">
+ <path d="M179.64 267.36c-22.41 39.703-60.616 115.78-69.286 149.64-8.647 33.775-8.772 66.417-.357 86.429 8.36 19.882 26.164 35.633 40.714 41.429-.597-14.376 14.373-43.286 72.857-72.5 58.626-29.285 78.382-27.131 103.57-47.143 25.63-20.362 12.61-67.045 3.214-93.929-9.434-26.993-34.967-59.124-66.429-69.643-31.033-10.375-65.018-4.848-84.286 5.714z" fill="#f5ff04" fill-rule="evenodd"/>
+ </clipPath>
+ <radialGradient id="iy" cx="275.44" cy="335.35" r="36.75" gradientTransform="matrix(.05911 2.687 -.72343 .01591 408.73 -424.56)" gradientUnits="userSpaceOnUse">
+ <stop stop-color="#fff" offset="0"/>
+ <stop stop-color="#fff" stop-opacity="0" offset="1"/>
+ </radialGradient>
+ <clipPath id="kb">
+ <path d="m265.94 126.68l-18.767 168.86 174.11-73.121 61.954 88.659 57.884-31.99-37.534-180.06-237.64 27.649z" fill-rule="evenodd" stroke="#000" stroke-width=".9"/>
+ </clipPath>
+ <clipPath id="jz">
+ <path d="M352.25 211.99c-3.804-25.264-16.81-50.638-17.157-75.525-.186-13.356 3.273-26.571 13.756-39.554 36.347-65.296 116.94-84.695 185.93-91.465 86.922-11.017 184.91 17.94 233.37 95.401 54.124 75.733 56.675 172.54 80.612 259.53 29.438 127.13 54.779 256.21 60.392 386.85-3.063 78.182-8.426 165.18-60.503 228.13-48.027 50.357-122.79 50.053-187.07 59.002-90.555 4.655-184.35-16.146-261.78-64.198-64.776-37.94-95.73-113.48-97.279-186.02-8.39-79.875 26.392-153.81 51.62-227.16 7.47-82.761 9.413-166.25 9.653-249.38-.837-32.195-7.09-63.817-11.546-95.609z" enable-background="accumulate" fill="#262f2f" fill-rule="evenodd" stroke="#000"/>
+ </clipPath>
+ <clipPath id="kd">
+ <path d="M352.25 211.99c-3.804-25.264-16.81-50.638-17.157-75.525-.186-13.356 3.273-26.571 13.756-39.554 36.347-65.296 116.94-84.695 185.93-91.465 86.922-11.017 184.91 17.94 233.37 95.401 54.124 75.733 56.675 172.54 80.612 259.53 29.438 127.13 54.779 256.21 60.392 386.85-3.063 78.182-8.426 165.18-60.503 228.13-48.027 50.357-122.79 50.053-187.07 59.002-90.555 4.655-184.35-16.146-261.78-64.198-64.776-37.94-95.73-113.48-97.279-186.02-8.39-79.875 26.392-153.81 51.62-227.16 7.47-82.761 9.413-166.25 9.653-249.38-.837-32.195-7.09-63.817-11.546-95.609z" enable-background="accumulate" fill="#262f2f" fill-rule="evenodd" stroke="#000"/>
+ </clipPath>
+ <clipPath id="jx">
+ <path d="M352.25 211.99c-3.804-25.264-16.81-50.638-17.157-75.525-.186-13.356 3.273-26.571 13.756-39.554 36.347-65.296 116.94-84.695 185.93-91.465 86.922-11.017 184.91 17.94 233.37 95.401 54.124 75.733 56.675 172.54 80.612 259.53 29.438 127.13 54.779 256.21 60.392 386.85-3.063 78.182-8.426 165.18-60.503 228.13-48.027 50.357-122.79 50.053-187.07 59.002-90.555 4.655-184.35-16.146-261.78-64.198-64.776-37.94-95.73-113.48-97.279-186.02-8.39-79.875 26.392-153.81 51.62-227.16 7.47-82.761 9.413-166.25 9.653-249.38-.837-32.195-7.09-63.817-11.546-95.609z" enable-background="accumulate" fill="#262f2f" fill-rule="evenodd" stroke="#000"/>
+ </clipPath>
+ <clipPath id="en">
+ <path d="M352.25 211.99c-3.804-25.264-16.81-50.638-17.157-75.525-.186-13.356 3.273-26.571 13.756-39.554 36.347-65.296 116.94-84.695 185.93-91.465 86.922-11.017 184.91 17.94 233.37 95.401 54.124 75.733 56.675 172.54 80.612 259.53 29.438 127.13 54.779 256.21 60.392 386.85-3.063 78.182-8.426 165.18-60.503 228.13-48.027 50.357-122.79 50.053-187.07 59.002-90.555 4.655-184.35-16.146-261.78-64.198-64.776-37.94-95.73-113.48-97.279-186.02-8.39-79.875 26.392-153.81 51.62-227.16 7.47-82.761 9.413-166.25 9.653-249.38-.837-32.195-7.09-63.817-11.546-95.609z" enable-background="accumulate" fill="#262f2f" fill-rule="evenodd" stroke="#000"/>
+ </clipPath>
+ <clipPath id="jw">
+ <path d="M821.64 477.89s22.619-6.507 35.743-5.873c13.123.634 30.642 1.939 43.709 12.186 13.067 10.248 25.068 27.14 34.112 58.37s1.698 99.252-6.176 143.35-28.265 106.11-45 140-49.798 77.495-60.569 89.876c-11.364 13.062-56.206 36.426-79.431 42.267 5.303-10.607 48.9-50.589 35-60.714-14.019-10.212-45.76 45.982-84.293 29.033 21.382-13.132 41.779-51.186 34.041-66.594-7.84-15.61-30.705 48.758-93.536 37.013 30.052-27.527 55.407-70.904 41.263-82.98-14.415-12.307-60.462 54.293-60.462 54.293s-2.822-41.7 13.773-68.607c16.639-26.978 79.653-81.615 99.553-111.7 19.9-30.088 33.613-66.009 42.135-92.518s15.801-77.1 15.801-77.1" enable-background="new" fill="#202020" fill-rule="evenodd" stroke="#000"/>
+ </clipPath>
+ <clipPath id="kp">
+ <path d="m366.89 504.13s-29.554 40.573-47.857 74.286-58.621 126.36-70.357 171.07c-11.759 44.803-62.5 123.57-62.5 123.57l76.071 18.214s11.807-12.823 31.071-46.071 60.357-138.57 60.357-138.57l13.214-202.5z" enable-background="accumulate" fill="#0f0f0f" fill-rule="evenodd" stroke="#000"/>
+ </clipPath>
+ <clipPath id="eo">
+ <path d="M569.03 1018.8c-4.286.714-27.628 3.618-57.857 10s-99.775 25.962-142.86 35.714-117.26 34.816-156.91 27.265c-39.648-7.55-89.516-64.408-89.516-64.408l4.286-94.286s85.886-16.201 112.14-33.571c26.257-17.37 45.582-49.666 59.286-71.429s32.857-71.429 32.857-71.429l238.57 262.14z" enable-background="accumulate" fill="#0b0b0b" fill-rule="evenodd" stroke="#000"/>
+ </clipPath>
+ <filter id="kc" x="-.353" y="-.182" width="1.706" height="1.363">
+ <feGaussianBlur stdDeviation="48.038"/>
+ </filter>
+ <filter id="jb" x="-.611" y="-.149" width="2.223" height="1.299">
+ <feGaussianBlur stdDeviation="37.83"/>
+ </filter>
+ <filter id="eg" x="-.235" y="-.245" width="1.47" height="1.49">
+ <feGaussianBlur stdDeviation="58.328"/>
+ </filter>
+ <filter id="jy" x="-.205" y="-.29" width="1.409" height="1.58">
+ <feGaussianBlur stdDeviation="22.3"/>
+ </filter>
+ <filter id="jv" x="-.344" y="-.184" width="1.688" height="1.369">
+ <feGaussianBlur stdDeviation="34.542"/>
+ </filter>
+ <filter id="kf" x="-.274" y="-.213" width="1.549" height="1.427">
+ <feGaussianBlur stdDeviation="11.314"/>
+ </filter>
+ <filter id="ja" x="-.259" y="-.224" width="1.518" height="1.447">
+ <feGaussianBlur stdDeviation="19.632"/>
+ </filter>
+ <filter id="kq" x="-.325" y="-.19" width="1.651" height="1.38">
+ <feGaussianBlur stdDeviation="28.713"/>
+ </filter>
+ <filter id="ko" x="-.381" y="-.175" width="1.762" height="1.35">
+ <feGaussianBlur stdDeviation="19.304"/>
+ </filter>
+ <filter id="kv" x="-.211" y="-.168" width="1.422" height="1.336">
+ <feGaussianBlur stdDeviation="8.369"/>
+ </filter>
+ <filter id="ks" x="-.187" y="-.236" width="1.374" height="1.473">
+ <feGaussianBlur stdDeviation="31.212"/>
+ </filter>
+ <clipPath id="ju">
+ <path d="M352.25 211.99c-3.804-25.264-16.81-50.638-17.157-75.525-.186-13.356 3.273-26.571 13.756-39.554 36.347-65.296 116.94-84.695 185.93-91.465 86.922-11.017 184.91 17.94 233.37 95.401 54.124 75.733 56.675 172.54 80.612 259.53 29.438 127.13 54.779 256.21 60.392 386.85-3.063 78.182-8.426 165.18-60.503 228.13-48.027 50.357-122.79 50.053-187.07 59.002-90.555 4.655-184.35-16.146-261.78-64.198-64.776-37.94-95.73-113.48-97.279-186.02-8.39-79.875 26.392-153.81 51.62-227.16 7.47-82.761 9.413-166.25 9.653-249.38-.837-32.195-7.09-63.817-11.546-95.609z" enable-background="accumulate" fill="#262f2f" fill-rule="evenodd" stroke="#000"/>
+ </clipPath>
+ <filter id="ki" x="-.252" y="-.053" width="1.503" height="1.106">
+ <feGaussianBlur stdDeviation="13.025"/>
+ </filter>
+ <linearGradient id="t" x1="603.84" x2="616.24" y1="627.85" y2="585.43" gradientTransform="translate(450.03 73.844)" gradientUnits="userSpaceOnUse">
+ <stop stop-color="#1a1a1a" offset="0"/>
+ <stop stop-color="#1a1a1a" stop-opacity="0" offset="1"/>
+ </linearGradient>
+ <filter id="dq" x="-.329" y="-.182" width="1.657" height="1.364">
+ <feGaussianBlur stdDeviation="20.913"/>
+ </filter>
+ <filter id="dr" x="-.555" y="-.514" width="2.109" height="2.029">
+ <feGaussianBlur stdDeviation="20.913"/>
+ </filter>
+ <filter id="cy" x="-.326" y="-.845" width="1.653" height="2.691">
+ <feGaussianBlur stdDeviation="21.92"/>
+ </filter>
+ <filter id="he" x="-.409" y="-.715" width="1.818" height="2.431">
+ <feGaussianBlur stdDeviation="21.92"/>
+ </filter>
+ <filter id="o">
+ <feGaussianBlur stdDeviation="8.881"/>
+ </filter>
+ <clipPath id="jt">
+ <path d="M647.61 540.05s22.619-6.507 35.743-5.873c13.123.634 30.642 1.939 43.709 12.186 13.067 10.248 25.068 27.14 34.112 58.37s1.698 99.252-6.176 143.35-28.265 106.11-45 140-49.798 77.495-60.569 89.876c-11.364 13.062-56.206 36.426-79.431 42.267 5.303-10.607 48.9-50.589 35-60.714-14.019-10.212-45.76 45.982-84.293 29.033 21.382-13.132 41.779-51.186 34.041-66.594-7.84-15.61-30.705 48.758-93.536 37.013 30.052-27.527 55.407-70.904 41.263-82.98-14.415-12.307-60.462 54.293-60.462 54.293s-2.822-41.7 13.773-68.607c16.639-26.978 79.653-81.615 99.553-111.7 19.9-30.088 33.613-66.009 42.135-92.518s15.801-77.1 15.801-77.1" enable-background="new" fill="#202020" fill-rule="evenodd"/>
+ </clipPath>
+ <filter id="je" x="-.277" y="-.325" width="1.554" height="1.65">
+ <feGaussianBlur stdDeviation="19.956"/>
+ </filter>
+ <clipPath id="e">
+ <path d="M760.16 935.83c6.794 18.903 10.494 33.3 11.89 51.212 1.397 17.912-3.783 51.801-2.9 70.656.881 18.845 8.133 40.099 27.345 48.969 19.419 8.966 49.319 10.211 74.12-3.146 24.8-13.357 57.4-70.326 70.974-97.309 13.624-27.084 38.76-114.5 44.66-149.77 5.9-35.27 2.551-41.3-4.617-49.055 2.64-27.84-1.5-54.935 13.11-87.186-30.249 11.826-37.382 40.161-48.319 65.505-8-50.933.21-71.273 3.319-101.22-29.065 14.778-42.862 47.114-45 92.857-10.924-1.304-21.391-4.434-33.571-.714-.264-46.023-1.464-76.889 8.91-114.21-53.254 21.027-62.946 106.59-56.052 112.78-10.883.535-21.371-1.297-32.857 2.857.638-42.57-.261-84.909-30-122.86 0 0-30.958 80.922-31.43 103.57s9.452 40.166 9.452 40.166-8.568 36.741-6.298 58.232c2.295 21.741 20.443 59.676 27.265 78.658z" enable-background="new" fill="#ada469" fill-rule="evenodd"/>
+ </clipPath>
+ <clipPath id="kr">
+ <path d="m366.89 504.13s-29.554 40.573-47.857 74.286-58.621 126.36-70.357 171.07c-11.759 44.803-62.5 123.57-62.5 123.57l76.071 18.214s11.807-12.823 31.071-46.071 60.357-138.57 60.357-138.57l13.214-202.5z" enable-background="accumulate" fill="#0f0f0f" fill-rule="evenodd"/>
+ </clipPath>
+ <clipPath id="am">
+ <path d="M586.13 997.99c6.794 18.903 10.494 33.3 11.89 51.212 1.397 17.912-3.783 51.801-2.9 70.656.881 18.845 8.133 40.099 27.345 48.969 19.419 8.966 49.319 10.211 74.12-3.146 24.8-13.357 57.4-70.326 70.974-97.309 13.624-27.084 38.76-114.5 44.66-149.77 5.9-35.27 2.551-41.3-4.617-49.055 2.64-27.84-1.5-54.935 13.11-87.186-30.249 11.826-37.382 40.161-48.319 65.505-8-50.933.21-71.273 3.319-101.22-29.065 14.778-42.862 47.114-45 92.857-10.924-1.304-21.391-4.434-33.571-.714-.264-46.023-1.464-76.889 8.91-114.21-53.254 21.027-62.946 106.59-56.052 112.78-10.883.535-21.371-1.297-32.857 2.857.638-42.57-.261-84.909-30-122.86 0 0-30.958 80.922-31.43 103.57s9.452 40.166 9.452 40.166-8.568 36.741-6.298 58.232c2.295 21.741 20.443 59.676 27.265 78.658z" enable-background="new" fill="#ada469" fill-rule="evenodd"/>
+ </clipPath>
+ <filter id="ds">
+ <feGaussianBlur stdDeviation="10.893"/>
+ </filter>
+ <filter id="bz" x="-.495" y="-.267" width="1.99" height="1.534">
+ <feGaussianBlur stdDeviation="10.731"/>
+ </filter>
+ <filter id="by" x="-.406" y="-.303" width="1.812" height="1.605">
+ <feGaussianBlur stdDeviation="9.859"/>
+ </filter>
+ <clipPath id="cj">
+ <path d="M586.13 997.99c6.794 18.903 10.494 33.3 11.89 51.212 1.397 17.912-3.783 51.801-2.9 70.656.881 18.845 8.133 40.099 27.345 48.969 19.419 8.966 49.319 10.211 74.12-3.146 24.8-13.357 57.4-70.326 70.974-97.309 13.624-27.084 38.76-114.5 44.66-149.77 5.9-35.27 2.551-41.3-4.617-49.055 2.64-27.84-1.5-54.935 13.11-87.186-30.249 11.826-37.382 40.161-48.319 65.505-8-50.933.21-71.273 3.319-101.22-29.065 14.778-42.862 47.114-45 92.857-10.924-1.304-21.391-4.434-33.571-.714-.264-46.023-1.464-76.889 8.91-114.21-53.254 21.027-62.946 106.59-56.052 112.78-10.883.535-21.371-1.297-32.857 2.857.638-42.57-.261-84.909-30-122.86 0 0-30.958 80.922-31.43 103.57s9.452 40.166 9.452 40.166-8.568 36.741-6.298 58.232c2.295 21.741 20.443 59.676 27.265 78.658z" enable-background="new" fill="#ada469" fill-rule="evenodd"/>
+ </clipPath>
+ <filter id="il">
+ <feGaussianBlur stdDeviation="3.616"/>
+ </filter>
+ <filter id="ir">
+ <feGaussianBlur stdDeviation="3.864"/>
+ </filter>
+ <clipPath id="ku">
+ <path d="M569.03 1018.8c-4.286.714-27.628 3.618-57.857 10s-57.314 4.966-135.79 17.33c-79.852 12.581-94.064 42.542-108.12 47.064-14.7 4.729-145.38-65.822-145.38-65.822l4.286-94.286s85.886-16.201 112.14-33.571c26.257-17.37 45.582-49.666 59.286-71.429s32.857-71.429 32.857-71.429l238.57 262.14z" enable-background="accumulate" fill="#292929" fill-rule="evenodd" stroke="#000"/>
+ </clipPath>
+ <linearGradient id="dt" x1="699.33" x2="698.98" y1="269.77" y2="346.14" gradientUnits="userSpaceOnUse">
+ <stop stop-color="#fff" offset="0"/>
+ <stop offset="1"/>
+ </linearGradient>
+ <mask id="jc" maskUnits="userSpaceOnUse">
+ <ellipse transform="translate(-174.03 62.156)" cx="579.47" cy="260.58" rx="192.69" ry="164.05" enable-background="accumulate" fill="url(#dt)"/>
+ </mask>
+ <clipPath id="is">
+ <path d="m266.27 924.57c-1.407 18.801-1.145 32.751 2.082 49.303s16.406 45.907 20.334 63.184c3.926 17.267 2.694 38.31-12.46 51.148-15.317 12.977-42.05 21.599-67.831 15.734s-69.55-49.223-88.59-70.228c-19.112-21.083-63.761-93.851-77.94-124.28-14.177-30.425-12.66-36.719-8.119-45.53-9.367-24.52-12.414-50.067-33.712-75.577 30.325 3.114 43.88 26.956 60.126 47.14-5.53-48.076-18.055-64.416-28.374-90.724 29.994 6.082 50.579 31.872 63.98 72.712 9.554-3.918 18.238-9.373 30.187-9.061-11.298-41.696-17.949-69.916-36.687-101.07 53.442 5.67 83.657 80.639 78.971 87.96 9.978-2.243 19.006-6.53 30.437-5.65-11.249-38.348-21.048-76.869-3.66-118.65 0 0 48.287 65.436 54.39 85.805 6.103 20.37 1.52 38.701 1.52 38.701s16.96 31.085 20.293 51.094c3.373 20.241-3.533 59.103-4.946 77.983z" enable-background="new" fill="#ada469" fill-rule="evenodd"/>
+ </clipPath>
+ <clipPath id="im">
+ <path d="M760.16 935.83c6.794 18.903 10.494 33.3 11.89 51.212 1.397 17.912-3.783 51.801-2.9 70.656.881 18.845 8.133 40.099 27.345 48.969 19.419 8.966 49.319 10.211 74.12-3.146 24.8-13.357 57.4-70.326 70.974-97.309 13.624-27.084 38.76-114.5 44.66-149.77 5.9-35.27 2.551-41.3-4.617-49.055 2.64-27.84-1.5-54.935 13.11-87.186-30.249 11.826-37.382 40.161-48.319 65.505-8-50.933.21-71.273 3.319-101.22-29.065 14.778-42.862 47.114-45 92.857-10.924-1.304-21.391-4.434-33.571-.714-.264-46.023-1.464-76.889 8.91-114.21-53.254 21.027-62.946 106.59-56.052 112.78-10.883.535-21.371-1.297-32.857 2.857.638-42.57-.261-84.909-30-122.86 0 0-30.958 80.922-31.43 103.57s9.452 40.166 9.452 40.166-8.568 36.741-6.298 58.232c2.295 21.741 20.443 59.676 27.265 78.658z" enable-background="new" fill="#ada469" fill-rule="evenodd" stroke="#000"/>
+ </clipPath>
+ <filter id="jq" x="-.088" y="-.177" width="1.176" height="1.355">
+ <feGaussianBlur stdDeviation="16.34"/>
+ </filter>
+ <filter id="i">
+ <feTurbulence baseFrequency=".24" numOctaves="10" result="result0" seed="655" type="fractalNoise"/>
+ <feDisplacementMap in="SourceGraphic" in2="result0" scale="62" xChannelSelector="B" yChannelSelector="G"/>
+ </filter>
+ <filter id="em">
+ <feGaussianBlur stdDeviation="2.04"/>
+ </filter>
+ <clipPath id="jo">
+ <path d="m709.29 844.51c54.286-1.429 126.04-15.052 170-26.786 44.053-11.757 125.89-36.347 175.36-57.857 49.339-21.453 113.6-59.282 154.29-92.143 40.508-32.721 52.39-55.82 60.714-33.571 8.37 22.368-16.407 56.326-37.857 81.071-21.604 24.923-52.731 52.705-98.929 89.286s-156.08 101.58-212.86 128.57c-57.066 27.125-128.2 58.238-172.14 72.5s-131.43 31.071-131.43 31.071l92.857-192.14z" enable-background="accumulate" fill="#121212" fill-rule="evenodd"/>
+ </clipPath>
+ <clipPath id="jp">
+ <path d="m709.29 844.51c54.286-1.429 126.04-15.052 170-26.786 44.053-11.757 125.89-36.347 175.36-57.857 49.339-21.453 113.6-59.282 154.29-92.143 40.508-32.721 52.39-55.82 60.714-33.571 8.37 22.368-16.407 56.326-37.857 81.071-21.604 24.923-52.731 52.705-98.929 89.286s-156.08 101.58-212.86 128.57c-57.066 27.125-128.2 58.238-172.14 72.5s-131.43 31.071-131.43 31.071l92.857-192.14z" enable-background="accumulate" fill="#121212" fill-rule="evenodd"/>
+ </clipPath>
+ <clipPath id="js">
+ <path d="m709.29 844.51c54.286-1.429 126.04-15.052 170-26.786 44.053-11.757 125.89-36.347 175.36-57.857 49.339-21.453 113.6-59.282 154.29-92.143 40.508-32.721 52.39-55.82 60.714-33.571 8.37 22.368-16.407 56.326-37.857 81.071-21.604 24.923-52.731 52.705-98.929 89.286s-156.08 101.58-212.86 128.57c-57.066 27.125-128.2 58.238-172.14 72.5s-131.43 31.071-131.43 31.071l92.857-192.14z" enable-background="accumulate" fill="#121212" fill-rule="evenodd"/>
+ </clipPath>
+ <clipPath id="ke">
+ <path d="M178.21 274.15c-3.804-25.264-16.81-50.638-17.157-75.525-.186-13.356 3.273-26.571 13.756-39.554 36.347-65.296 116.94-84.695 185.93-91.465 86.922-11.017 184.91 17.94 233.37 95.401 54.124 75.733 56.675 172.54 80.612 259.53 29.438 127.13 54.779 256.21 60.392 386.85-3.063 78.182-8.426 165.18-60.503 228.13-48.027 50.357-122.79 50.053-187.07 59.002-90.555 4.655-184.35-16.146-261.78-64.198-64.776-37.94-95.73-113.48-97.279-186.02-8.39-79.875 26.392-153.81 51.62-227.16 7.47-82.761 9.413-166.25 9.653-249.38-.837-32.195-7.09-63.817-11.546-95.609z" enable-background="accumulate" fill="#262f2f" fill-rule="evenodd"/>
+ </clipPath>
+ <filter id="iv" x="-.243" y="-.391" width="1.487" height="1.782">
+ <feGaussianBlur stdDeviation="14.59"/>
+ </filter>
+ <filter id="iu" x="-.146" y="-.235" width="1.292" height="1.47">
+ <feGaussianBlur stdDeviation="4.444"/>
+ </filter>
+ <filter id="it">
+ <feGaussianBlur stdDeviation=".606"/>
+ </filter>
+ <filter id="ix">
+ <feGaussianBlur stdDeviation="6.589"/>
+ </filter>
+ <filter id="iw">
+ <feGaussianBlur stdDeviation="1.505"/>
+ </filter>
+ <filter id="jj" x="-.103" y="-.342" width="1.206" height="1.685">
+ <feGaussianBlur stdDeviation="1.168"/>
+ </filter>
+ <filter id="jf" x="-.098" y="-.198" width="1.197" height="1.395">
+ <feGaussianBlur stdDeviation="1.168"/>
+ </filter>
+ <filter id="jh" x="-.098" y="-.198" width="1.196" height="1.397">
+ <feGaussianBlur stdDeviation="1.168"/>
+ </filter>
+ <filter id="ji" x="-.099" y="-.226" width="1.198" height="1.453">
+ <feGaussianBlur stdDeviation="1.168"/>
+ </filter>
+ <filter id="hy" x="-.099" y="-.225" width="1.198" height="1.451">
+ <feGaussianBlur stdDeviation="1.168"/>
+ </filter>
+ <filter id="hu" x="-.105" y="-.405" width="1.209" height="1.809">
+ <feGaussianBlur stdDeviation="1.168"/>
+ </filter>
+ <filter id="hv" x="-.103" y="-.364" width="1.207" height="1.729">
+ <feGaussianBlur stdDeviation="1.168"/>
+ </filter>
+ <filter id="hw" x="-.102" y="-.324" width="1.204" height="1.647">
+ <feGaussianBlur stdDeviation="1.168"/>
+ </filter>
+ <filter id="hx" x="-.101" y="-.274" width="1.201" height="1.548">
+ <feGaussianBlur stdDeviation="1.168"/>
+ </filter>
+ <filter id="hz" x="-.098" y="-.209" width="1.197" height="1.417">
+ <feGaussianBlur stdDeviation="1.168"/>
+ </filter>
+ <filter id="ia" x="-.098" y="-.203" width="1.197" height="1.406">
+ <feGaussianBlur stdDeviation="1.168"/>
+ </filter>
+ <filter id="ib" x="-.098" y="-.198" width="1.196" height="1.397">
+ <feGaussianBlur stdDeviation="1.168"/>
+ </filter>
+ <filter id="jg">
+ <feGaussianBlur stdDeviation="1.168"/>
+ </filter>
+ <filter id="jk">
+ <feGaussianBlur stdDeviation="1.168"/>
+ </filter>
+ <filter id="hr" x="-.031" y="-.103" width="1.062" height="1.205">
+ <feGaussianBlur stdDeviation=".35"/>
+ </filter>
+ <filter id="hq">
+ <feGaussianBlur stdDeviation=".35"/>
+ </filter>
+ <filter id="hp">
+ <feGaussianBlur stdDeviation=".35"/>
+ </filter>
+ <filter id="hn">
+ <feGaussianBlur stdDeviation=".35"/>
+ </filter>
+ <filter id="hm">
+ <feGaussianBlur stdDeviation=".35"/>
+ </filter>
+ <filter id="hl">
+ <feGaussianBlur stdDeviation=".35"/>
+ </filter>
+ <filter id="hk">
+ <feGaussianBlur stdDeviation=".35"/>
+ </filter>
+ <filter id="hj">
+ <feGaussianBlur stdDeviation=".35"/>
+ </filter>
+ <filter id="hi">
+ <feGaussianBlur stdDeviation=".35"/>
+ </filter>
+ <filter id="hh">
+ <feGaussianBlur stdDeviation=".35"/>
+ </filter>
+ <filter id="hf" x="-.031" y="-.121" width="1.063" height="1.243">
+ <feGaussianBlur stdDeviation=".35"/>
+ </filter>
+ <filter id="hg" x="-.031" y="-.109" width="1.062" height="1.219">
+ <feGaussianBlur stdDeviation=".35"/>
+ </filter>
+ <filter id="hs">
+ <feGaussianBlur stdDeviation=".35"/>
+ </filter>
+ <filter id="ho">
+ <feGaussianBlur stdDeviation=".35"/>
+ </filter>
+ <filter id="ht">
+ <feGaussianBlur stdDeviation="1.723"/>
+ </filter>
+ <clipPath id="jl">
+ <path transform="translate(.08 -.031)" d="M1111.4-285.94l-3.937 1.875c-.041.01-.1.02-.125.031-.42.213-.165.1-.657.313-.486.21-1.737.584-4.093 1.469-3.332 1.25-5.805 2.15-7 3.062-1.537.021-3.72.233-5.657.719a227.677 227.677 0 0 1-6.75 1.594c-1.895.42-1.675.642-2.875.875-1.296.251-1.721-.01-5.437.78-3.49.743-8.895 1.932-10.156 2.688-1.584-.18-3.868-.321-5.844-.03-3.04.446-4.916.672-6.844.905-.655.08-1.04.201-1.344.282-.426.131-.685.26-1.375.343-1.311.16-1.762-.156-5.53.282-3.555.413-9.006 1.272-10.25 1.937-1.6-.297-3.859-.534-5.845-.344-3.058.294-4.972.484-6.906.657-1.934.172-1.688.422-2.906.53-1.316.119-1.76-.163-5.531.25-3.542.39-9.008 1.21-10.281 1.876-1.6-.295-3.887-.507-5.875-.313-3.059.3-4.941.48-6.875.657-.658.06-1.04.178-1.344.25-.428.119-.683.218-1.375.28-1.316.121-1.76-.194-5.531.22-3.556.39-9.006 1.239-10.25
+1.906-1.599-.294-3.86-.524-5.844-.313-3.056.326-4.974.527-6.906.719s-1.69.44-2.906.563c-1.315.131-1.763-.165-5.532.28-3.539.42-8.977 1.293-10.25 1.97-1.597-.281-3.86-.42-5.843-.188-3.052.358-4.945.568-6.875.781-.657.073-1.041.173-1.344.25-.427.128-.685.268-1.375.344-1.314.146-1.768-.174-5.531.313-3.55.458-8.979 1.419-10.22 2.125-1.593-.245-3.833-.382-5.812-.125-3.048.394-4.95.648-6.875.906-1.924.258-1.726.493-2.937.656-1.31.176-1.748-.104-5.5.469-3.525.538-8.924 1.699-10.188 2.437-1.588-.203-3.846-.254-5.813.094-3.026.536-4.899.862-6.812 1.188-.651.11-1.014.27-1.313.375-.42.164-.663.33-1.344.468-1.294.262-1.727-.006-5.437.813-3.499.772-8.846 2.383-10.062 3.219-1.563-.078-3.758.085-5.688.593-2.972.783-4.817 1.232-6.687 1.75s-1.667.768-2.844 1.094c-1.273.353-1.697.107-5.344 1.188-3.425 1.014-8.65 2.933-9.875 3.843-1.539.013-3.72.273-5.625.875-2.93.928-4.75 1.459-6.594
+2.063-.626.205-.991.393-1.28.531-.408.214-.654.409-1.313.625-1.255.412-1.687.19-5.282 1.438-3.39 1.177-8.595 3.213-9.78 4.156-1.525.06-3.65.395-5.532 1.062-2.897 1.029-4.699 1.676-6.531 2.313-1.832.637-1.628.848-2.781 1.25-1.247.434-1.664.2-5.22 1.562-3.338 1.28-8.486 3.483-9.687 4.47-1.507.107-3.635.498-5.5 1.218a1047.26 1047.26 0 0 1-6.437 2.469c-.617.233-.997.442-1.281.594v.03l-8 3.188 1.812 14.72c-.258-.062 6.188 3.312 6.188 3.312.226-.145.449-.273.718-.375 1.08-.41 2.172-.216 6-1.688 3.829-1.471 5.224-2.005 5.907-2.406.68-.4 1.611-.88 2.218-1.531 1.827-.138 3.571-.493 4.938-1 2.968-1.1 4.875-1.806 6.781-2.469 1.906-.662 2.354-1.415 3.406-1.781 1.092-.38 2.195-.166 6.063-1.531 3.867-1.366 5.283-1.827 5.969-2.22.7-.4 1.7-.932 2.312-1.593 1.97-.055 3.817-.385 5.281-.875 3.002-1.005 4.927-1.622 6.844-2.25 1.539-.504 2.174-1.047 2.906-1.437.23-.135.476-.254.75-.344 1.099-.36 2.182-.082
+6.094-1.313 3.912-1.23 5.366-1.673 6.063-2.03.694-.358 1.63-.794 2.25-1.407 1.865-.023 3.635-.267 5.03-.688 3.031-.913 4.993-1.43 6.938-1.968 1.945-.539 2.427-1.265 3.5-1.563 1.114-.31 2.22.007 6.188-1.031 3.967-1.039 5.417-1.433 6.125-1.75.735-.33 1.814-.754 2.437-1.375 1.998.116 3.858-.02 5.344-.375 3.078-.735 5.084-1.101 7.063-1.5 1.588-.32 2.244-.79 3-1.094a3.4 3.4 0 0 1 .75-.25c1.133-.23 2.304.209 6.343-.5 4.04-.709 5.5-.927 6.22-1.187.715-.26 1.704-.568 2.343-1.094 1.924.24 3.748.224 5.188 0 3.126-.488 5.154-.7 7.156-.969 2.001-.268 2.489-.945 3.594-1.094 1.146-.154 2.275.302 6.343-.219 4.068-.52 5.56-.695 6.282-.937.737-.247 1.798-.586 2.437-1.125 2.05.336 3.974.398 5.5.219 3.142-.37 5.18-.56 7.188-.782 1.61-.178 2.264-.608 3.03-.843.242-.086.495-.156.782-.188 1.15-.127 2.301.347 6.375-.125s5.559-.61 6.281-.844c.72-.232 1.7-.473 2.344-.968 1.936.333 3.77.404 5.219.25 3.146-.335
+5.177-.519 7.187-.719 2.01-.2 2.484-.826 3.594-.938 1.151-.115 2.297.366 6.375-.062s5.589-.562 6.313-.781c.739-.224 1.795-.514 2.437-1.031 2.057.398 4.002.493 5.531.343 3.149-.308 5.176-.473 7.188-.656 1.614-.147 2.263-.56 3.031-.781.241-.081.494-.13.781-.156 1.152-.106 2.293.392 6.375 0s5.59-.531 6.313-.75c.72-.219 1.7-.448 2.343-.938 1.939.35 3.77.454 5.22.313 3.148-.309 5.175-.474 7.187-.657 2.011-.183 2.514-.838 3.625-.937 1.152-.103 2.292.385 6.375 0s5.588-.501 6.312-.719c.74-.222 1.796-.514 2.438-1.031 2.057.402 4.003.503 5.531.344 3.147-.329 5.177-.523 7.187-.72 1.613-.156 2.266-.63 3.032-.874.24-.088.463-.122.75-.156 1.148-.14 2.316.34 6.375-.25 4.058-.59 5.562-.778 6.281-1.032.717-.253 1.675-.558 2.312-1.093 1.92.212 3.72.151 5.157-.094 3.119-.533 5.111-.929 7.093-1.313 1.983-.383 2.475-1.04 3.563-1.28 1.129-.251 2.27.115 6.25-.876s5.43-1.42 6.125-1.781c.722-.376 1.762-.87
+2.375-1.531 1.963-.012 3.794-.291 5.219-.844 2.95-1.145 4.873-1.87 6.687-2.75 1.456-.706 2.32-1.702 2.531-2 .213-.298.1-.729.125-.75.043-.035.34-.094.5-.437.86-1.848 2.324-5.628 2.438-6.313.114-.682.168-1.353.219-1.75.029-.23-.147-.879-.125-.937.03-.082.288-.251.343-.5.267-1.199.09-2.208-.125-3.625-.213-1.418-.971-4.615-1.625-5.47-.658-.861-1.224-1.01-1.75-1z" enable-background="new" fill="#bcb786" fill-rule="evenodd"/>
+ </clipPath>
+ <filter id="kk" x="-.082" y="-.227" width="1.163" height="1.453">
+ <feGaussianBlur stdDeviation="2.437"/>
+ </filter>
+ <filter id="kj" x="-.041" y="-.113" width="1.082" height="1.227">
+ <feGaussianBlur stdDeviation="1.219"/>
+ </filter>
+ <clipPath id="kl">
+ <path d="M1049.2-282.27l-.09.008c-1.387.884-6.603 1.607-6.629 9.523-.024 7.426 15.013 17.091 17.156 18.094 1.73.81 3.592 1.41 5.406 1.72l1.438.218c1.92.212 3.72.151 5.156-.094 3.12-.532 5.112-.928 7.094-1.312 1.982-.384 2.474-1.04 3.562-1.281 1.129-.251 2.27.116 6.25-.875 3.98-.992 5.43-1.42 6.125-1.782.723-.376 1.762-.87 2.375-1.53 1.963-.013 3.794-.292 5.219-.845 2.951-1.144 4.873-1.869 6.688-2.75 1.455-.706 2.319-1.702 2.53-2 .213-.298.1-.728.126-.75.043-.035.34-.094.5-.437.859-1.847 2.323-5.628 2.437-6.313.114-.682.168-1.352.219-1.75.029-.23-.147-.879-.125-.937.031-.082.288-.25.344-.5.266-1.198.089-2.208-.125-3.625-.214-1.418-.972-4.615-1.625-5.469-.42-.548-.8-.792-1.157-.906-.067-.017-.123-.047-.187-.063-.021-.004-.042.003-.062 0-.312-.075-.609-.158-1.156-.218-.986-.109-2.425-.26-3.969-.25-.515.003-1.037.047-1.563.093-3.558.313-9.01.991-10.218
+1.625-1.634-.334-3.949-.612-5.938-.468-3.064.22-4.968.342-6.906.468-1.939.127-1.686.389-2.906.469-1.32.087-1.787-.223-5.563.094-3.546.297-8.98.993-10.22 1.625-1.632-.335-3.945-.613-5.937-.469-3.064.221-4.967.373-6.906.5-.659.043-1.042.124-1.344.187z" enable-background="new" fill="#bcb786" fill-rule="evenodd" opacity=".824"/>
+ </clipPath>
+ <filter id="km" x="-.022" width="1.044">
+ <feGaussianBlur stdDeviation=".575"/>
+ </filter>
+ <clipPath id="kn">
+ <path d="M205.47-408.97l-.09.002c-1.446.786-6.7 1.143-7.276 9.039-.542 7.405 13.786 18.096 15.854 19.245 1.67.927 3.484 1.655 5.273 2.09l1.419.32c1.9.344 3.7.41 5.15.265 3.149-.314 5.164-.57 7.168-.815 2.004-.245 2.54-.865 3.643-1.03 1.144-.172 2.257.274 6.296-.438s5.515-1.038 6.234-1.35c.747-.325 1.818-.746 2.476-1.362 1.96.124 3.805-.026 5.265-.479 3.024-.936 4.991-1.525 6.863-2.277 1.501-.603 2.432-1.536 2.664-1.819.233-.282.15-.72.177-.74.045-.032.346-.07.53-.4.985-1.784 2.709-5.453 2.87-6.128.162-.673.263-1.338.34-1.73.046-.228-.085-.888-.059-.945.037-.08.305-.23.378-.475.35-1.177.243-2.195.128-3.625-.115-1.429-.648-4.67-1.24-5.568-.38-.577-.742-.846-1.09-.985-.066-.022-.12-.055-.183-.075-.02-.005-.042 0-.063-.004-.305-.097-.596-.2-1.138-.299-.975-.176-2.4-.428-3.942-.526a19.346 19.346 0 0
+0-1.565-.015c-3.572.064-9.057.361-10.307.91-1.606-.448-3.896-.886-5.89-.882-3.072.007-4.98-.005-6.922-.013-1.943-.01-1.71.27-2.932.265-1.322-.005-1.767-.347-5.556-.294-3.558.05-9.028.365-10.307.91-1.606-.448-3.893-.887-5.89-.882-3.072.007-4.982.027-6.924.018-.661-.003-1.049.05-1.354.093z" enable-background="new" fill="#bcb786" fill-rule="evenodd" opacity=".824"/>
+ </clipPath>
+ <linearGradient id="w" x1="774.98" x2="755.12" y1="-211.87" y2="-202.68" gradientTransform="translate(-19.092 4.243)" gradientUnits="userSpaceOnUse" xlink:href="#n"/>
+ <mask id="jm" maskUnits="userSpaceOnUse">
+ <path d="m718.41-224.31l33.25 56 276-24 159.5-48.25-66.5-82.75-402.25 99z" fill="url(#w)" fill-rule="evenodd"/>
+ </mask>
+ <clipPath id="kg">
+ <path d="M734.03 519.49s16.755 37.018 28.701 53.954 52.727 56.046 52.727 56.046l.597-138.59" enable-background="accumulate" fill="#1a1a1a" fill-rule="evenodd" stroke="#000"/>
+ </clipPath>
+ <filter id="jn">
+ <feGaussianBlur stdDeviation="10.662"/>
+ </filter>
+ <filter id="ip">
+ <feGaussianBlur stdDeviation="7.18"/>
+ </filter>
+ <clipPath id="iq">
+ <path d="m266.27 924.57c-1.407 18.801-1.145 32.751 2.082 49.303 3.226 16.552 16.406 45.907 20.334 63.184 3.926 17.267 2.694 38.31-12.46 51.148-15.317 12.978-42.05 21.599-67.831 15.734s-69.55-49.223-88.59-70.228c-19.112-21.083-63.761-93.851-77.94-124.28-14.177-30.425-12.66-36.719-8.119-45.53-9.367-24.52-12.414-50.067-33.712-75.577 30.325 3.114 43.88 26.956 60.126 47.14-5.53-48.076-18.055-64.417-28.374-90.724 29.994 6.082 50.579 31.872 63.98 72.712 9.554-3.918 18.238-9.373 30.187-9.061-11.298-41.696-17.949-69.916-36.687-101.07 53.442 5.67 83.657 80.639 78.971 87.96 9.978-2.243 19.006-6.53 30.437-5.65-11.249-38.348-21.048-76.869-3.66-118.65 0 0 48.287 65.436 54.39 85.805 6.103 20.37 1.52 38.701 1.52 38.701s16.96 31.085 20.293 51.094c3.373 20.241-3.533 59.103-4.946 77.983z" enable-background="new" fill="#ada469" fill-rule="evenodd"/>
+ </clipPath>
+ <filter id="in">
+ <feGaussianBlur stdDeviation="6.82"/>
+ </filter>
+ <clipPath id="io">
+ <path d="m266.27 924.57c-1.407 18.801-1.145 32.751 2.082 49.303 3.226 16.552 16.406 45.907 20.334 63.184 3.926 17.267 2.694 38.31-12.46 51.148-15.317 12.978-42.05 21.599-67.831 15.734s-69.55-49.223-88.59-70.228c-19.112-21.083-63.761-93.851-77.94-124.28-14.177-30.425-12.66-36.719-8.119-45.53-9.367-24.52-12.414-50.067-33.712-75.577 30.325 3.114 43.88 26.956 60.126 47.14-5.53-48.076-18.055-64.417-28.374-90.724 29.994 6.082 50.579 31.872 63.98 72.712 9.554-3.918 18.238-9.373 30.187-9.061-11.298-41.696-17.949-69.916-36.687-101.07 53.442 5.67 83.657 80.639 78.971 87.96 9.978-2.243 19.006-6.53 30.437-5.65-11.249-38.348-21.048-76.869-3.66-118.65 0 0 48.287 65.436 54.39 85.805 6.103 20.37 1.52 38.701 1.52 38.701s16.96 31.085 20.293 51.094c3.373 20.241-3.533 59.103-4.946 77.983z" enable-background="new" fill="#ada469" fill-rule="evenodd"/>
+ </clipPath>
+ <filter id="ij" x="-.144" y="-.103" width="1.288" height="1.206">
+ <feGaussianBlur stdDeviation="7.389"/>
+ </filter>
+ <clipPath id="ik">
+ <path d="M760.16 935.83c6.794 18.903 10.494 33.3 11.89 51.212 1.397 17.912-3.783 51.801-2.9 70.656.881 18.845 8.133 40.099 27.345 48.969 19.419 8.966 49.319 10.211 74.12-3.146 24.8-13.357 57.4-70.326 70.974-97.309 13.624-27.084 38.76-114.5 44.66-149.77 5.9-35.27 2.551-41.3-4.617-49.055 2.64-27.84-1.5-54.935 13.11-87.186-30.249 11.826-37.382 40.161-48.319 65.505-8-50.933.21-71.273 3.319-101.22-29.065 14.778-42.862 47.114-45 92.857-10.924-1.304-21.391-4.434-33.571-.714-.264-46.023-1.464-76.889 8.91-114.21-53.254 21.027-62.946 106.59-56.052 112.78-10.883.535-21.371-1.297-32.857 2.857.638-42.57-.261-84.909-30-122.86 0 0-30.958 80.922-31.43 103.57s9.452 40.166 9.452 40.166-8.568 36.741-6.298 58.232c2.295 21.741 20.443 59.676 27.265 78.658z" enable-background="new" fill="#ada469" fill-rule="evenodd"/>
+ </clipPath>
+ <filter id="ih" x="-.09" y="-.103" width="1.181" height="1.205">
+ <feGaussianBlur stdDeviation="5.346"/>
+ </filter>
+ <clipPath id="ii">
+ <path d="M760.16 935.83c6.794 18.903 10.494 33.3 11.89 51.212 1.397 17.912-3.783 51.801-2.9 70.656.881 18.845 8.133 40.099 27.345 48.969 19.419 8.966 49.319 10.211 74.12-3.146 24.8-13.357 57.4-70.326 70.974-97.309 13.624-27.084 38.76-114.5 44.66-149.77 5.9-35.27 2.551-41.3-4.617-49.055 2.64-27.84-1.5-54.935 13.11-87.186-30.249 11.826-37.382 40.161-48.319 65.505-8-50.933.21-71.273 3.319-101.22-29.065 14.778-42.862 47.114-45 92.857-10.924-1.304-21.391-4.434-33.571-.714-.264-46.023-1.464-76.889 8.91-114.21-53.254 21.027-62.946 106.59-56.052 112.78-10.883.535-21.371-1.297-32.857 2.857.638-42.57-.261-84.909-30-122.86 0 0-30.958 80.922-31.43 103.57s9.452 40.166 9.452 40.166-8.568 36.741-6.298 58.232c2.295 21.741 20.443 59.676 27.265 78.658z" enable-background="new" fill="#ada469" fill-rule="evenodd"/>
+ </clipPath>
+ <clipPath id="gc">
+ <path d="M569.03 1018.8c-4.286.714-27.628 3.618-57.857 10s-99.775 25.962-142.86 35.714-117.26 34.816-156.91 27.265c-39.648-7.55-89.516-64.408-89.516-64.408l4.286-94.286s85.886-16.201 112.14-33.571c26.257-17.37 45.582-49.666 59.286-71.429s32.857-71.429 32.857-71.429l238.57 262.14z" enable-background="accumulate" fill="#0b0b0b" fill-rule="evenodd" stroke="#000"/>
+ </clipPath>
+ <filter id="gb" x="-.211" y="-.168" width="1.422" height="1.336">
+ <feGaussianBlur stdDeviation="8.369"/>
+ </filter>
+ <clipPath id="fz">
+ <path d="M205.47-408.97l-.09.002c-1.446.786-6.7 1.143-7.276 9.039-.542 7.405 13.786 18.096 15.854 19.245 1.67.927 3.484 1.655 5.273 2.09l1.419.32c1.9.344 3.7.41 5.15.265 3.149-.314 5.164-.57 7.168-.815 2.004-.245 2.54-.865 3.643-1.03 1.144-.172 2.257.274 6.296-.438s5.515-1.038 6.234-1.35c.747-.325 1.818-.746 2.476-1.362 1.96.124 3.805-.026 5.265-.479 3.024-.936 4.991-1.525 6.863-2.277 1.501-.603 2.432-1.536 2.664-1.819.233-.282.15-.72.177-.74.045-.032.346-.07.53-.4.985-1.784 2.709-5.453 2.87-6.128.162-.673.263-1.338.34-1.73.046-.228-.085-.888-.059-.945.037-.08.305-.23.378-.475.35-1.177.243-2.195.128-3.625-.115-1.429-.648-4.67-1.24-5.568-.38-.577-.742-.846-1.09-.985-.066-.022-.12-.055-.183-.075-.02-.005-.042 0-.063-.004-.305-.097-.596-.2-1.138-.299-.975-.176-2.4-.428-3.942-.526a19.346 19.346 0 0
+0-1.565-.015c-3.572.064-9.057.361-10.307.91-1.606-.448-3.896-.886-5.89-.882-3.072.007-4.98-.005-6.922-.013-1.943-.01-1.71.27-2.932.265-1.322-.005-1.767-.347-5.556-.294-3.558.05-9.028.365-10.307.91-1.606-.448-3.893-.887-5.89-.882-3.072.007-4.982.027-6.924.018-.661-.003-1.049.05-1.354.093z" enable-background="new" fill="#bcb786" fill-rule="evenodd" opacity=".824"/>
+ </clipPath>
+ <filter id="fy" x="-.022" width="1.044">
+ <feGaussianBlur stdDeviation=".575"/>
+ </filter>
+ <clipPath id="fx">
+ <path d="M1049.2-282.27l-.09.008c-1.387.884-6.603 1.607-6.629 9.523-.024 7.426 15.013 17.091 17.156 18.094 1.73.81 3.592 1.41 5.406 1.72l1.438.218c1.92.212 3.72.151 5.156-.094 3.12-.532 5.112-.928 7.094-1.312 1.982-.384 2.474-1.04 3.562-1.281 1.129-.251 2.27.116 6.25-.875 3.98-.992 5.43-1.42 6.125-1.782.723-.376 1.762-.87 2.375-1.53 1.963-.013 3.794-.292 5.219-.845 2.951-1.144 4.873-1.869 6.688-2.75 1.455-.706 2.319-1.702 2.53-2 .213-.298.1-.728.126-.75.043-.035.34-.094.5-.437.859-1.847 2.323-5.628 2.437-6.313.114-.682.168-1.352.219-1.75.029-.23-.147-.879-.125-.937.031-.082.288-.25.344-.5.266-1.198.089-2.208-.125-3.625-.214-1.418-.972-4.615-1.625-5.469-.42-.548-.8-.792-1.157-.906-.067-.017-.123-.047-.187-.063-.021-.004-.042.003-.062 0-.312-.075-.609-.158-1.156-.218-.986-.109-2.425-.26-3.969-.25-.515.003-1.037.047-1.563.093-3.558.313-9.01.991-10.218
+1.625-1.634-.334-3.949-.612-5.938-.468-3.064.22-4.968.342-6.906.468-1.939.127-1.686.389-2.906.469-1.32.087-1.787-.223-5.563.094-3.546.297-8.98.993-10.22 1.625-1.632-.335-3.945-.613-5.937-.469-3.064.221-4.967.373-6.906.5-.659.043-1.042.124-1.344.187z" enable-background="new" fill="#bcb786" fill-rule="evenodd" opacity=".824"/>
+ </clipPath>
+ <filter id="fw" x="-.082" y="-.227" width="1.163" height="1.453">
+ <feGaussianBlur stdDeviation="2.437"/>
+ </filter>
+ <filter id="fv" x="-.041" y="-.113" width="1.082" height="1.227">
+ <feGaussianBlur stdDeviation="1.219"/>
+ </filter>
+ <clipPath id="y">
+ <path d="M352.25 211.99c-3.804-25.264-16.81-50.638-17.157-75.525-.186-13.356 3.273-26.571 13.756-39.554 36.347-65.296 116.94-84.695 185.93-91.465 86.922-11.017 184.91 17.94 233.37 95.401 54.124 75.733 56.675 172.54 80.612 259.53 29.438 127.13 54.779 256.21 60.392 386.85-3.063 78.182-8.426 165.18-60.503 228.13-48.027 50.357-122.79 50.053-187.07 59.002-90.555 4.655-184.35-16.146-261.78-64.198-64.776-37.94-95.73-113.48-97.279-186.02-8.39-79.875 26.392-153.81 51.62-227.16 7.47-82.761 9.413-166.25 9.653-249.38-.837-32.195-7.09-63.817-11.546-95.609z" enable-background="accumulate" fill="#262f2f" fill-rule="evenodd" stroke="#000"/>
+ </clipPath>
+ <filter id="fu" x="-.252" y="-.053" width="1.503" height="1.106">
+ <feGaussianBlur stdDeviation="13.025"/>
+ </filter>
+ <clipPath id="fs">
+ <path d="M734.03 519.49s16.755 37.018 28.701 53.954 52.727 56.046 52.727 56.046l.597-138.59" enable-background="accumulate" fill="#1a1a1a" fill-rule="evenodd" stroke="#000"/>
+ </clipPath>
+ <filter id="fr" x="-.274" y="-.213" width="1.549" height="1.427">
+ <feGaussianBlur stdDeviation="11.314"/>
+ </filter>
+ <clipPath id="fq">
+ <path d="M178.21 274.15c-3.804-25.264-16.81-50.638-17.157-75.525-.186-13.356 3.273-26.571 13.756-39.554 36.347-65.296 116.94-84.695 185.93-91.465 86.922-11.017 184.91 17.94 233.37 95.401 54.124 75.733 56.675 172.54 80.612 259.53 29.438 127.13 54.779 256.21 60.392 386.85-3.063 78.182-8.426 165.18-60.503 228.13-48.027 50.357-122.79 50.053-187.07 59.002-90.555 4.655-184.35-16.146-261.78-64.198-64.776-37.94-95.73-113.48-97.279-186.02-8.39-79.875 26.392-153.81 51.62-227.16 7.47-82.761 9.413-166.25 9.653-249.38-.837-32.195-7.09-63.817-11.546-95.609z" enable-background="accumulate" fill="#262f2f" fill-rule="evenodd"/>
+ </clipPath>
+ <filter id="aq">
+ <feGaussianBlur stdDeviation="2.04"/>
+ </filter>
+ <filter id="g">
+ <feTurbulence baseFrequency=".24" numOctaves="10" result="result0" seed="655" type="fractalNoise"/>
+ <feDisplacementMap in="SourceGraphic" in2="result0" scale="62" xChannelSelector="B" yChannelSelector="G"/>
+ </filter>
+ <clipPath id="fp">
+ <path d="M352.25 211.99c-3.804-25.264-16.81-50.638-17.157-75.525-.186-13.356 3.273-26.571 13.756-39.554 36.347-65.296 116.94-84.695 185.93-91.465 86.922-11.017 184.91 17.94 233.37 95.401 54.124 75.733 56.675 172.54 80.612 259.53 29.438 127.13 54.779 256.21 60.392 386.85-3.063 78.182-8.426 165.18-60.503 228.13-48.027 50.357-122.79 50.053-187.07 59.002-90.555 4.655-184.35-16.146-261.78-64.198-64.776-37.94-95.73-113.48-97.279-186.02-8.39-79.875 26.392-153.81 51.62-227.16 7.47-82.761 9.413-166.25 9.653-249.38-.837-32.195-7.09-63.817-11.546-95.609z" enable-background="accumulate" fill="#262f2f" fill-rule="evenodd" stroke="#000"/>
+ </clipPath>
+ <filter id="fo" x="-.353" y="-.182" width="1.706" height="1.363">
+ <feGaussianBlur stdDeviation="48.038"/>
+ </filter>
+ <clipPath id="fn">
+ <path d="m265.94 126.68l-18.767 168.86 174.11-73.121 61.954 88.659 57.884-31.99-37.534-180.06-237.64 27.649z" fill-rule="evenodd" stroke="#000" stroke-width=".9"/>
+ </clipPath>
+ <filter id="fm" x="-.277" y="-.325" width="1.554" height="1.65">
+ <feGaussianBlur stdDeviation="19.956"/>
+ </filter>
+ <mask id="fk" maskUnits="userSpaceOnUse">
+ <ellipse transform="translate(-174.03 62.156)" cx="579.47" cy="260.58" rx="192.69" ry="164.05" enable-background="accumulate" fill="url(#dt)"/>
+ </mask>
+ <filter id="fj" x="-.611" y="-.149" width="2.223" height="1.299">
+ <feGaussianBlur stdDeviation="37.83"/>
+ </filter>
+ <filter id="fi" x="-.259" y="-.224" width="1.518" height="1.447">
+ <feGaussianBlur stdDeviation="19.632"/>
+ </filter>
+ <filter id="fh" x="-.3" y="-.3" width="1.6" height="1.6">
+ <feGaussianBlur stdDeviation="2"/>
+ </filter>
+ <clipPath id="x">
+ <path d="M179.64 267.36c-22.41 39.703-60.616 115.78-69.286 149.64-8.647 33.775-8.772 66.417-.357 86.429 8.36 19.882 26.164 35.633 40.714 41.429-.597-14.376 14.373-43.286 72.857-72.5 58.626-29.285 78.382-27.131 103.57-47.143 25.63-20.362 12.61-67.045 3.214-93.929-9.434-26.993-34.967-59.124-66.429-69.643-31.033-10.375-65.018-4.848-84.286 5.714z" fill="#f5ff04" fill-rule="evenodd"/>
+ </clipPath>
+ <filter id="hd">
+ <feGaussianBlur stdDeviation="6.589"/>
+ </filter>
+ <filter id="hc">
+ <feGaussianBlur stdDeviation="1.505"/>
+ </filter>
+ <filter id="hb" x="-.243" y="-.391" width="1.487" height="1.782">
+ <feGaussianBlur stdDeviation="14.59"/>
+ </filter>
+ <filter id="ha" x="-.146" y="-.235" width="1.292" height="1.47">
+ <feGaussianBlur stdDeviation="4.444"/>
+ </filter>
+ <filter id="gz">
+ <feGaussianBlur stdDeviation=".606"/>
+ </filter>
+ <clipPath id="if">
+ <path d="m709.29 844.51c54.286-1.429 126.04-15.052 170-26.786 44.053-11.757 125.89-36.347 175.36-57.857 49.339-21.453 113.6-59.282 154.29-92.143 40.508-32.721 52.39-55.82 60.714-33.571 8.37 22.368-16.407 56.326-37.857 81.071-21.604 24.923-52.731 52.705-98.929 89.286s-156.08 101.58-212.86 128.57c-57.066 27.125-128.2 58.238-172.14 72.5s-131.43 31.071-131.43 31.071l92.857-192.14z" enable-background="accumulate" fill="#121212" fill-rule="evenodd"/>
+ </clipPath>
+ <mask id="gy" maskUnits="userSpaceOnUse">
+ <path d="m718.41-224.31l33.25 56 276-24 159.5-48.25-66.5-82.75-402.25 99z" fill="url(#w)" fill-rule="evenodd"/>
+ </mask>
+ <clipPath id="gx">
+ <path transform="translate(.08 -.031)" d="M1111.4-285.94l-3.937 1.875c-.041.01-.1.02-.125.031-.42.213-.165.1-.657.313-.486.21-1.737.584-4.093 1.469-3.332 1.25-5.805 2.15-7 3.062-1.537.021-3.72.233-5.657.719a227.677 227.677 0 0 1-6.75 1.594c-1.895.42-1.675.642-2.875.875-1.296.251-1.721-.01-5.437.78-3.49.743-8.895 1.932-10.156 2.688-1.584-.18-3.868-.321-5.844-.03-3.04.446-4.916.672-6.844.905-.655.08-1.04.201-1.344.282-.426.131-.685.26-1.375.343-1.311.16-1.762-.156-5.53.282-3.555.413-9.006 1.272-10.25 1.937-1.6-.297-3.859-.534-5.845-.344-3.058.294-4.972.484-6.906.657-1.934.172-1.688.422-2.906.53-1.316.119-1.76-.163-5.531.25-3.542.39-9.008 1.21-10.281 1.876-1.6-.295-3.887-.507-5.875-.313-3.059.3-4.941.48-6.875.657-.658.06-1.04.178-1.344.25-.428.119-.683.218-1.375.28-1.316.121-1.76-.194-5.531.22-3.556.39-9.006 1.239-10.25
+1.906-1.599-.294-3.86-.524-5.844-.313-3.056.326-4.974.527-6.906.719s-1.69.44-2.906.563c-1.315.131-1.763-.165-5.532.28-3.539.42-8.977 1.293-10.25 1.97-1.597-.281-3.86-.42-5.843-.188-3.052.358-4.945.568-6.875.781-.657.073-1.041.173-1.344.25-.427.128-.685.268-1.375.344-1.314.146-1.768-.174-5.531.313-3.55.458-8.979 1.419-10.22 2.125-1.593-.245-3.833-.382-5.812-.125-3.048.394-4.95.648-6.875.906-1.924.258-1.726.493-2.937.656-1.31.176-1.748-.104-5.5.469-3.525.538-8.924 1.699-10.188 2.437-1.588-.203-3.846-.254-5.813.094-3.026.536-4.899.862-6.812 1.188-.651.11-1.014.27-1.313.375-.42.164-.663.33-1.344.468-1.294.262-1.727-.006-5.437.813-3.499.772-8.846 2.383-10.062 3.219-1.563-.078-3.758.085-5.688.593-2.972.783-4.817 1.232-6.687 1.75s-1.667.768-2.844 1.094c-1.273.353-1.697.107-5.344 1.188-3.425 1.014-8.65 2.933-9.875 3.843-1.539.013-3.72.273-5.625.875-2.93.928-4.75 1.459-6.594
+2.063-.626.205-.991.393-1.28.531-.408.214-.654.409-1.313.625-1.255.412-1.687.19-5.282 1.438-3.39 1.177-8.595 3.213-9.78 4.156-1.525.06-3.65.395-5.532 1.062-2.897 1.029-4.699 1.676-6.531 2.313-1.832.637-1.628.848-2.781 1.25-1.247.434-1.664.2-5.22 1.562-3.338 1.28-8.486 3.483-9.687 4.47-1.507.107-3.635.498-5.5 1.218a1047.26 1047.26 0 0 1-6.437 2.469c-.617.233-.997.442-1.281.594v.03l-8 3.188 1.812 14.72c-.258-.062 6.188 3.312 6.188 3.312.226-.145.449-.273.718-.375 1.08-.41 2.172-.216 6-1.688 3.829-1.471 5.224-2.005 5.907-2.406.68-.4 1.611-.88 2.218-1.531 1.827-.138 3.571-.493 4.938-1 2.968-1.1 4.875-1.806 6.781-2.469 1.906-.662 2.354-1.415 3.406-1.781 1.092-.38 2.195-.166 6.063-1.531 3.867-1.366 5.283-1.827 5.969-2.22.7-.4 1.7-.932 2.312-1.593 1.97-.055 3.817-.385 5.281-.875 3.002-1.005 4.927-1.622 6.844-2.25 1.539-.504 2.174-1.047 2.906-1.437.23-.135.476-.254.75-.344 1.099-.36 2.182-.082
+6.094-1.313 3.912-1.23 5.366-1.673 6.063-2.03.694-.358 1.63-.794 2.25-1.407 1.865-.023 3.635-.267 5.03-.688 3.031-.913 4.993-1.43 6.938-1.968 1.945-.539 2.427-1.265 3.5-1.563 1.114-.31 2.22.007 6.188-1.031 3.967-1.039 5.417-1.433 6.125-1.75.735-.33 1.814-.754 2.437-1.375 1.998.116 3.858-.02 5.344-.375 3.078-.735 5.084-1.101 7.063-1.5 1.588-.32 2.244-.79 3-1.094a3.4 3.4 0 0 1 .75-.25c1.133-.23 2.304.209 6.343-.5 4.04-.709 5.5-.927 6.22-1.187.715-.26 1.704-.568 2.343-1.094 1.924.24 3.748.224 5.188 0 3.126-.488 5.154-.7 7.156-.969 2.001-.268 2.489-.945 3.594-1.094 1.146-.154 2.275.302 6.343-.219 4.068-.52 5.56-.695 6.282-.937.737-.247 1.798-.586 2.437-1.125 2.05.336 3.974.398 5.5.219 3.142-.37 5.18-.56 7.188-.782 1.61-.178 2.264-.608 3.03-.843.242-.086.495-.156.782-.188 1.15-.127 2.301.347 6.375-.125s5.559-.61 6.281-.844c.72-.232 1.7-.473 2.344-.968 1.936.333 3.77.404 5.219.25 3.146-.335
+5.177-.519 7.187-.719 2.01-.2 2.484-.826 3.594-.938 1.151-.115 2.297.366 6.375-.062s5.589-.562 6.313-.781c.739-.224 1.795-.514 2.437-1.031 2.057.398 4.002.493 5.531.343 3.149-.308 5.176-.473 7.188-.656 1.614-.147 2.263-.56 3.031-.781.241-.081.494-.13.781-.156 1.152-.106 2.293.392 6.375 0s5.59-.531 6.313-.75c.72-.219 1.7-.448 2.343-.938 1.939.35 3.77.454 5.22.313 3.148-.309 5.175-.474 7.187-.657 2.011-.183 2.514-.838 3.625-.937 1.152-.103 2.292.385 6.375 0s5.588-.501 6.312-.719c.74-.222 1.796-.514 2.438-1.031 2.057.402 4.003.503 5.531.344 3.147-.329 5.177-.523 7.187-.72 1.613-.156 2.266-.63 3.032-.874.24-.088.463-.122.75-.156 1.148-.14 2.316.34 6.375-.25 4.058-.59 5.562-.778 6.281-1.032.717-.253 1.675-.558 2.312-1.093 1.92.212 3.72.151 5.157-.094 3.119-.533 5.111-.929 7.093-1.313 1.983-.383 2.475-1.04 3.563-1.28 1.129-.251 2.27.115 6.25-.876s5.43-1.42 6.125-1.781c.722-.376 1.762-.87
+2.375-1.531 1.963-.012 3.794-.291 5.219-.844 2.95-1.145 4.873-1.87 6.687-2.75 1.456-.706 2.32-1.702 2.531-2 .213-.298.1-.729.125-.75.043-.035.34-.094.5-.437.86-1.848 2.324-5.628 2.438-6.313.114-.682.168-1.353.219-1.75.029-.23-.147-.879-.125-.937.03-.082.288-.251.343-.5.267-1.199.09-2.208-.125-3.625-.213-1.418-.971-4.615-1.625-5.47-.658-.861-1.224-1.01-1.75-1z" enable-background="new" fill="#bcb786" fill-rule="evenodd"/>
+ </clipPath>
+ <filter id="gw">
+ <feGaussianBlur stdDeviation="1.168"/>
+ </filter>
+ <filter id="gv" x="-.103" y="-.342" width="1.206" height="1.685">
+ <feGaussianBlur stdDeviation="1.168"/>
+ </filter>
+ <filter id="gu" x="-.099" y="-.226" width="1.198" height="1.453">
+ <feGaussianBlur stdDeviation="1.168"/>
+ </filter>
+ <filter id="gt" x="-.098" y="-.198" width="1.196" height="1.397">
+ <feGaussianBlur stdDeviation="1.168"/>
+ </filter>
+ <filter id="gs">
+ <feGaussianBlur stdDeviation="1.168"/>
+ </filter>
+ <filter id="gr" x="-.098" y="-.198" width="1.197" height="1.395">
+ <feGaussianBlur stdDeviation="1.168"/>
+ </filter>
+ <filter id="gq" x="-.098" y="-.198" width="1.196" height="1.397">
+ <feGaussianBlur stdDeviation="1.168"/>
+ </filter>
+ <filter id="gp" x="-.098" y="-.203" width="1.197" height="1.406">
+ <feGaussianBlur stdDeviation="1.168"/>
+ </filter>
+ <filter id="go" x="-.098" y="-.209" width="1.197" height="1.417">
+ <feGaussianBlur stdDeviation="1.168"/>
+ </filter>
+ <filter id="gn" x="-.099" y="-.225" width="1.198" height="1.451">
+ <feGaussianBlur stdDeviation="1.168"/>
+ </filter>
+ <filter id="gm" x="-.101" y="-.274" width="1.201" height="1.548">
+ <feGaussianBlur stdDeviation="1.168"/>
+ </filter>
+ <filter id="gl" x="-.102" y="-.324" width="1.204" height="1.647">
+ <feGaussianBlur stdDeviation="1.168"/>
+ </filter>
+ <filter id="gk" x="-.103" y="-.364" width="1.207" height="1.729">
+ <feGaussianBlur stdDeviation="1.168"/>
+ </filter>
+ <filter id="gj" x="-.105" y="-.405" width="1.209" height="1.809">
+ <feGaussianBlur stdDeviation="1.168"/>
+ </filter>
+ <filter id="gi">
+ <feGaussianBlur stdDeviation="1.723"/>
+ </filter>
+ <filter id="gh">
+ <feGaussianBlur stdDeviation=".35"/>
+ </filter>
+ <filter id="gg" x="-.031" y="-.103" width="1.062" height="1.205">
+ <feGaussianBlur stdDeviation=".35"/>
+ </filter>
+ <filter id="gf">
+ <feGaussianBlur stdDeviation=".35"/>
+ </filter>
+ <filter id="ge">
+ <feGaussianBlur stdDeviation=".35"/>
+ </filter>
+ <filter id="ff">
+ <feGaussianBlur stdDeviation=".35"/>
+ </filter>
+ <filter id="fe">
+ <feGaussianBlur stdDeviation=".35"/>
+ </filter>
+ <filter id="fd">
+ <feGaussianBlur stdDeviation=".35"/>
+ </filter>
+ <filter id="fc">
+ <feGaussianBlur stdDeviation=".35"/>
+ </filter>
+ <filter id="fb">
+ <feGaussianBlur stdDeviation=".35"/>
+ </filter>
+ <filter id="fa">
+ <feGaussianBlur stdDeviation=".35"/>
+ </filter>
+ <filter id="ez">
+ <feGaussianBlur stdDeviation=".35"/>
+ </filter>
+ <filter id="ey">
+ <feGaussianBlur stdDeviation=".35"/>
+ </filter>
+ <filter id="ex" x="-.031" y="-.109" width="1.062" height="1.219">
+ <feGaussianBlur stdDeviation=".35"/>
+ </filter>
+ <filter id="ew" x="-.031" y="-.121" width="1.063" height="1.243">
+ <feGaussianBlur stdDeviation=".35"/>
+ </filter>
+ <clipPath id="ie">
+ <path d="m266.27 924.57c-1.407 18.801-1.145 32.751 2.082 49.303 3.226 16.552 16.406 45.907 20.334 63.184 3.926 17.267 2.694 38.31-12.46 51.148-15.317 12.978-42.05 21.599-67.831 15.734s-69.55-49.223-88.59-70.228c-19.112-21.083-63.761-93.851-77.94-124.28-14.177-30.425-12.66-36.719-8.119-45.53-9.367-24.52-12.414-50.067-33.712-75.577 30.325 3.114 43.88 26.956 60.126 47.14-5.53-48.076-18.055-64.417-28.374-90.724 29.994 6.082 50.579 31.872 63.98 72.712 9.554-3.918 18.238-9.373 30.187-9.061-11.298-41.696-17.949-69.916-36.687-101.07 53.442 5.67 83.657 80.639 78.971 87.96 9.978-2.243 19.006-6.53 30.437-5.65-11.249-38.348-21.048-76.869-3.66-118.65 0 0 48.287 65.436 54.39 85.805 6.103 20.37 1.52 38.701 1.52 38.701s16.96 31.085 20.293 51.094c3.373 20.241-3.533 59.103-4.946 77.983z" enable-background="new" fill="#ada469" fill-rule="evenodd"/>
+ </clipPath>
+ <filter id="id">
+ <feGaussianBlur stdDeviation="7.18"/>
+ </filter>
+ <clipPath id="ic">
+ <path d="m266.27 924.57c-1.407 18.801-1.145 32.751 2.082 49.303 3.226 16.552 16.406 45.907 20.334 63.184 3.926 17.267 2.694 38.31-12.46 51.148-15.317 12.978-42.05 21.599-67.831 15.734s-69.55-49.223-88.59-70.228c-19.112-21.083-63.761-93.851-77.94-124.28-14.177-30.425-12.66-36.719-8.119-45.53-9.367-24.52-12.414-50.067-33.712-75.577 30.325 3.114 43.88 26.956 60.126 47.14-5.53-48.076-18.055-64.417-28.374-90.724 29.994 6.082 50.579 31.872 63.98 72.712 9.554-3.918 18.238-9.373 30.187-9.061-11.298-41.696-17.949-69.916-36.687-101.07 53.442 5.67 83.657 80.639 78.971 87.96 9.978-2.243 19.006-6.53 30.437-5.65-11.249-38.348-21.048-76.869-3.66-118.65 0 0 48.287 65.436 54.39 85.805 6.103 20.37 1.52 38.701 1.52 38.701s16.96 31.085 20.293 51.094c3.373 20.241-3.533 59.103-4.946 77.983z" enable-background="new" fill="#ada469" fill-rule="evenodd"/>
+ </clipPath>
+ <filter id="gd">
+ <feGaussianBlur stdDeviation="6.82"/>
+ </filter>
+ <clipPath id="ev">
+ <path d="M760.16 935.83c6.794 18.903 10.494 33.3 11.89 51.212 1.397 17.912-3.783 51.801-2.9 70.656.881 18.845 8.133 40.099 27.345 48.969 19.419 8.966 49.319 10.211 74.12-3.146 24.8-13.357 57.4-70.326 70.974-97.309 13.624-27.084 38.76-114.5 44.66-149.77 5.9-35.27 2.551-41.3-4.617-49.055 2.64-27.84-1.5-54.935 13.11-87.186-30.249 11.826-37.382 40.161-48.319 65.505-8-50.933.21-71.273 3.319-101.22-29.065 14.778-42.862 47.114-45 92.857-10.924-1.304-21.391-4.434-33.571-.714-.264-46.023-1.464-76.889 8.91-114.21-53.254 21.027-62.946 106.59-56.052 112.78-10.883.535-21.371-1.297-32.857 2.857.638-42.57-.261-84.909-30-122.86 0 0-30.958 80.922-31.43 103.57s9.452 40.166 9.452 40.166-8.568 36.741-6.298 58.232c2.295 21.741 20.443 59.676 27.265 78.658z" enable-background="new" fill="#ada469" fill-rule="evenodd"/>
+ </clipPath>
+ <filter id="eu" x="-.144" y="-.103" width="1.288" height="1.206">
+ <feGaussianBlur stdDeviation="7.389"/>
+ </filter>
+ <clipPath id="et">
+ <path d="M760.16 935.83c6.794 18.903 10.494 33.3 11.89 51.212 1.397 17.912-3.783 51.801-2.9 70.656.881 18.845 8.133 40.099 27.345 48.969 19.419 8.966 49.319 10.211 74.12-3.146 24.8-13.357 57.4-70.326 70.974-97.309 13.624-27.084 38.76-114.5 44.66-149.77 5.9-35.27 2.551-41.3-4.617-49.055 2.64-27.84-1.5-54.935 13.11-87.186-30.249 11.826-37.382 40.161-48.319 65.505-8-50.933.21-71.273 3.319-101.22-29.065 14.778-42.862 47.114-45 92.857-10.924-1.304-21.391-4.434-33.571-.714-.264-46.023-1.464-76.889 8.91-114.21-53.254 21.027-62.946 106.59-56.052 112.78-10.883.535-21.371-1.297-32.857 2.857.638-42.57-.261-84.909-30-122.86 0 0-30.958 80.922-31.43 103.57s9.452 40.166 9.452 40.166-8.568 36.741-6.298 58.232c2.295 21.741 20.443 59.676 27.265 78.658z" enable-background="new" fill="#ada469" fill-rule="evenodd"/>
+ </clipPath>
+ <filter id="es" x="-.09" y="-.103" width="1.181" height="1.205">
+ <feGaussianBlur stdDeviation="5.346"/>
+ </filter>
+ <marker id="eq" overflow="visible" orient="auto">
+ <path d="m-1.2 0l-1 1 3.5-1-3.5-1 1 1z" fill="#f8d615" fill-rule="evenodd" stroke="#f8d615" stroke-width=".2pt"/>
+ </marker>
+ <radialGradient id="r" cx="142.96" cy="107.09" r="66.982" gradientTransform="matrix(-.33248 .90223 -.95824 -.35312 305.29 19.909)" gradientUnits="userSpaceOnUse">
+ <stop stop-color="#1e2323" offset="0"/>
+ <stop stop-color="#181d1d" offset=".56"/>
+ <stop offset="1"/>
+ </radialGradient>
+ <radialGradient id="q" cx="317.79" cy="129.65" r="47.863" gradientTransform="matrix(1.0036 0 0 1.6613 -160.53 -96.205)" gradientUnits="userSpaceOnUse" xlink:href="#u"/>
+ <radialGradient id="p" cx="325.31" cy="80.91" r="26.938" gradientTransform="matrix(2.0748 -.1578 .23824 3.1325 -550.77 -65.729)" gradientUnits="userSpaceOnUse">
+ <stop stop-color="#283131" stop-opacity="0" offset="0"/>
+ <stop stop-color="#1e2424" stop-opacity="0" offset=".513"/>
+ <stop offset="1"/>
+ </radialGradient>
+ <linearGradient id="kt" x1="347.9" x2="275.58" y1="1070.2" y2="867.98" gradientUnits="userSpaceOnUse">
+ <stop offset="0"/>
+ <stop offset=".022"/>
+ <stop offset=".759"/>
+ <stop stop-color="#232323" offset=".885"/>
+ <stop stop-color="#595959" offset="1"/>
+ </linearGradient>
+ <linearGradient id="kh" x1="603.84" x2="616.24" y1="627.85" y2="585.43" gradientTransform="translate(450.03 73.844)" gradientUnits="userSpaceOnUse" xlink:href="#t"/>
+ <linearGradient id="el" x1="609.31" x2="560.83" y1="239.47" y2="262.86" gradientTransform="translate(450.03 73.844)" gradientUnits="userSpaceOnUse">
+ <stop stop-color="#0a0c0c" offset="0"/>
+ <stop stop-color="#1f2727" stop-opacity="0" offset="1"/>
+ </linearGradient>
+ <radialGradient id="ek" cx="543.67" cy="147.31" r="47.863" gradientTransform="matrix(2.1382 0 0 2.3383 -77.038 -101.69)" gradientUnits="userSpaceOnUse" xlink:href="#u"/>
+ <radialGradient id="ef" cx="385" cy="237.01" r="86.929" gradientTransform="matrix(1 0 0 .8562 0 34.08)" gradientUnits="userSpaceOnUse">
+ <stop stop-color="#ada469" offset="0"/>
+ <stop stop-color="#ada469" offset=".811"/>
+ <stop stop-color="#fff" offset="1"/>
+ </radialGradient>
+ <linearGradient id="ee" x1="398.21" x2="379.29" y1="343.52" y2="265.31" gradientTransform="translate(450.03 73.844)" gradientUnits="userSpaceOnUse" xlink:href="#s"/>
+ <radialGradient id="ed" cx="397.16" cy="336.95" r="36.75" gradientTransform="translate(-375.32 -318.42) scale(1.945)" gradientUnits="userSpaceOnUse">
+ <stop stop-color="#344040" offset="0"/>
+ <stop stop-color="#222929" offset=".5"/>
+ <stop offset="1"/>
+ </radialGradient>
+ <radialGradient id="ec" cx="402.49" cy="317.24" r="23.714" gradientTransform="translate(-1358.3 -1070.7) scale(4.3777)" gradientUnits="userSpaceOnUse">
+ <stop offset="0"/>
+ <stop stop-color="#1d1d1d" offset="1"/>
+ </radialGradient>
+ <radialGradient id="eb" cx="250.23" cy="475.1" r="95.989" gradientTransform="matrix(1.2259 -.70777 .1414 .24491 322.22 608.92)" gradientUnits="userSpaceOnUse">
+ <stop stop-color="#d9e002" offset="0"/>
+ <stop stop-color="#a9ae01" offset=".5"/>
+ <stop stop-color="#717501" offset="1"/>
+ </radialGradient>
+ <radialGradient id="m" cx="228.81" cy="440.27" r="119.18" gradientTransform="matrix(1.1323 .76595 -1.455 2.151 588.75 -711.8)" gradientUnits="userSpaceOnUse">
+ <stop stop-color="#ff0" offset="0"/>
+ <stop stop-color="#b2b200" offset="1"/>
+ </radialGradient>
+ <radialGradient id="dz" cx="275.44" cy="335.35" r="36.75" gradientTransform="matrix(.05911 2.687 -.72343 .01591 408.73 -424.56)" gradientUnits="userSpaceOnUse">
+ <stop stop-color="#ff0" offset="0"/>
+ <stop stop-color="#ff0" stop-opacity="0" offset="1"/>
+ </radialGradient>
+ <linearGradient id="l" x1="182.35" x2="145.53" y1="256.11" y2="542.21" gradientUnits="userSpaceOnUse">
+ <stop stop-color="#7d7d00" offset="0"/>
+ <stop stop-color="#c6c700" offset=".364"/>
+ <stop stop-color="#f6f800" offset="1"/>
+ </linearGradient>
+ <radialGradient id="dy" cx="296.34" cy="427.18" r="19.704" gradientTransform="translate(-599.29 -827.09) scale(2.9797)" gradientUnits="userSpaceOnUse">
+ <stop stop-opacity="0" offset="0"/>
+ <stop offset="1"/>
+ </radialGradient>
+ <radialGradient id="dx" cx="429.57" cy="377.43" r="72.08" gradientTransform="matrix(1 0 0 .61803 0 144.16)" gradientUnits="userSpaceOnUse">
+ <stop stop-color="#e2e2e2" offset="0"/>
+ <stop stop-color="#e2e2e2" stop-opacity="0" offset="1"/>
+ </radialGradient>
+ <radialGradient id="dw" cx="437.7" cy="391.22" r="36.612" gradientTransform="matrix(1 0 0 .61803 0 149.43)" gradientUnits="userSpaceOnUse">
+ <stop stop-color="#c7bd80" offset="0"/>
+ <stop stop-color="#c7bd80" stop-opacity="0" offset="1"/>
+ </radialGradient>
+ <linearGradient id="dv" x1="412.09" x2="417.38" y1="404.92" y2="401.83" gradientUnits="userSpaceOnUse" xlink:href="#j"/>
+ <linearGradient id="du" x1="411.91" x2="417.38" y1="404.92" y2="401.83" gradientUnits="userSpaceOnUse" xlink:href="#j"/>
+ <linearGradient id="ej" x1="411.91" x2="417.38" y1="405.54" y2="401.83" gradientUnits="userSpaceOnUse" xlink:href="#j"/>
+ <linearGradient id="ei" x1="412.09" x2="417.38" y1="405.54" y2="401.83" gradientUnits="userSpaceOnUse" xlink:href="#j"/>
+ <linearGradient id="eh" x1="411.73" x2="417.38" y1="405.54" y2="401.83" gradientUnits="userSpaceOnUse" xlink:href="#j"/>
+ <linearGradient id="jr" x1="1255.7" x2="893.7" y1="667.09" y2="858.01" gradientUnits="userSpaceOnUse" xlink:href="#n"/>
+ <linearGradient id="ft" x1="603.84" x2="616.24" y1="627.85" y2="585.43" gradientTransform="matrix(1.0057 0 0 2.3995 3424.4 -24.137)" gradientUnits="userSpaceOnUse" xlink:href="#t"/>
+ <radialGradient id="fl" cx="418.3" cy="342.48" r="131.45" gradientTransform="matrix(1.3957 .62111 -.42441 .95372 -15.062 -227.97)" gradientUnits="userSpaceOnUse" xlink:href="#s"/>
+ <radialGradient id="fg" cx="275.44" cy="335.35" r="36.75" gradientTransform="matrix(.05911 2.687 -.72343 .01591 408.73 -424.56)" gradientUnits="userSpaceOnUse" xlink:href="#n"/>
+ <clipPath id="ga">
+ <path d="M3492.3 296.46H3930v902.66h-437.7z" fill="#fff"/>
+ </clipPath>
+ </defs>
+ <g stroke-miterlimit="1">
+ <path d="M10.45 109.38h1876.7v1563H10.45z" enable-background="new" fill="#a8a8a8" stroke="#000" stroke-width="20.9"/>
+ <path d="M2337.1 111.42h1878.8v1565H2337.1z" enable-background="new" fill="none" stroke="#000" stroke-width="20.925"/>
+ <path d="M2358.4 132.96h1833.4v1522.9H2358.4z" enable-background="new" fill="#a8a8a8" stroke="#f83615" stroke-width="20.391"/>
+ </g>
+ <g fill-rule="evenodd">
+ <path transform="translate(-2833.5 -4370) scale(10.727)" d="M304.64 526.65c-10 .357-18.214 2.857-18.214 2.857l7.5 6.071 10.357 3.572 16.071.357 22.5-5.357 7.857 1.071 20.357-2.143-10.357 6.786c5.46-1.023 17.393 3.57 9.643 5.357-1.74.402 13.929-4.643 13.929-4.643l2.5-4.642 3.571-9.286h11.43l18.213-4.643 3.572-5-16.071 1.071-12.143 2.143-14.643-5-70.692 16.708-5.38-5.279z" enable-background="new" filter="url(#ep)" opacity=".5"/>
+ <g enable-background="new">
+ <path transform="matrix(.71084 -.19374 .26296 .96481 552.25 332.01)" d="m245.12 100.05s-47.128-31.647-67.215-35.801c-20.038-4.144-38.473-3.318-51.934 13.607s-12.077 61.265-13.536 86.97 2.55 70.177 17.605 88.666c15.055 18.488 45.886 13.585 49.927 21.414 2.213 4.287 65.152-174.86 65.152-174.86z" enable-background="accumulate" fill="url(#r)"/>
+ <path transform="matrix(.71084 -.19374 .26296 .96481 552.25 332.01)" d="M135.38 82.018s26.344 1.939 37.633 13.903c11.415 12.097 13.735 21.332 15.296 37.735 1.563 16.425-.85 28.418-7.814 36.037s-1.004 19.583-25.916 12.071-27.032-27.783-26.515-46.305c.517-18.529 7.316-53.441 7.316-53.441z" enable-background="accumulate" fill="url(#q)"/>
+ <path transform="matrix(.71084 -.19374 .26296 .96481 552.25 332.01)" d="M135.65 81.927s-4.645 16.365.588 28.563c5.488 12.793 27.224 44.26 27.224 54.656l22.656-5c2.542-6.966 3.21-15.752 2.188-26.5-1.562-16.403-3.867-25.621-15.281-37.719-9.655-10.232-31.593-13.375-37.375-14z" enable-background="new" fill="url(#p)"/>
+ </g>
+ <path d="m893.6 1350.3c-4.286 0.714-27.628 3.618-57.857 10s-57.314 4.966-135.79 17.33c-79.852 12.581-94.064 42.542-108.12 47.064-14.7 4.729-145.38-65.822-145.38-65.822l4.286-94.286s85.886-16.201 112.14-33.571c26.257-17.37 45.582-49.666 59.286-71.429s32.857-71.429 32.857-71.429l238.57 262.14z" enable-background="accumulate" stroke="#000"/>
+ <path transform="translate(324.57 331.53)" d="m332.34 898.39l-32.732-61.3-37.617 45.106c2.177 1.317 5.774-20.856 45.6-64.417l24.749 80.61z" clip-path="url(#eo)" enable-background="accumulate" fill="#fff" filter="url(#kv)" opacity=".5"/>
+ <path transform="translate(324.57 331.53)" d="m200.82 863.03l146.37-51.619 243.95 226.27-241.83 140.01-181.02-87.681 32.527-226.98z" clip-path="url(#ku)" enable-background="accumulate" fill="url(#kt)" filter="url(#ks)"/>
+ <path d="m691.46 835.66s-29.554 40.573-47.857 74.286-58.621 126.36-70.357 171.07c-11.759 44.803-62.5 123.57-62.5 123.57l76.071 18.214s11.807-12.823 31.071-46.071 60.357-138.57 60.357-138.57l13.214-202.5z" enable-background="accumulate" fill="#0f0f0f"/>
+ <path transform="translate(324.57 331.53)" d="m430.28 381.94c-7.071 2.828-236.18 32.152-236.18 32.152l-39.64 359.83 90.198 92.64 52.326-114.55 100.47-186.39 32.828-183.68z" clip-path="url(#kr)" enable-background="accumulate" fill="#fff" filter="url(#kq)" opacity=".4"/>
+ <path d="m1018.2 1359.5s23.256 11.394 36.068 20.476c12.697 9.001 29.472 24.649 41.692 37.36 12.306 12.8 20.113 22.599 41.533 24.161 21.432 1.563 53.282-8.788 73.296-24.664 20.014-15.877 45.647-69.233 45.647-69.233l-127.16-143.07" enable-background="accumulate" stroke="#000"/>
+ <path transform="translate(324.57 331.53)" d="M331.34 641.5L216.17 835.36l44.042 90.598 97.581-193.75-26.456-90.711z" clip-path="url(#kp)" enable-background="accumulate" filter="url(#ko)" opacity=".75"/>
+ <g enable-background="new">
+ <path d="M1113.913 623.101l-.09-.002c-1.48.72-6.744.842-7.674 8.704-.872 7.373 12.962 18.694 14.976 19.936 1.626 1.001 3.407 1.81 5.174 2.325l1.403.382c1.883.43 3.679.575 5.134.496 3.16-.173 5.184-.339 7.197-.493 2.013-.155 2.577-.75 3.686-.866 1.15-.12 2.242.375 6.309-.155 4.066-.53 5.556-.79 6.288-1.07.76-.29 1.85-.663 2.534-1.25 1.952.213 3.803.145 5.281-.241 3.063-.8 5.055-1.3 6.958-1.968 1.527-.536 2.499-1.426 2.744-1.698.245-.271.181-.712.21-.73.046-.03.348-.055.546-.378 1.065-1.737 2.951-5.325 3.143-5.993.191-.664.322-1.324.417-1.713.056-.225-.045-.89-.017-.946.04-.078.315-.216.399-.457.402-1.16.34-2.183.29-3.616-.05-1.433-.438-4.695-.99-5.618-.353-.593-.703-.88-1.044-1.033-.065-.025-.118-.06-.18-.083-.02-.007-.042-.002-.061-.007-.301-.111-.586-.228-1.124-.35-.966-.22-2.379-.535-3.914-.702a19.278 19.278 0 0
+0-1.563-.085c-3.571-.097-9.064-.045-10.338.446-1.584-.518-3.852-1.06-5.845-1.144-3.069-.13-4.974-.228-6.914-.324-1.94-.095-1.72.194-2.941.134-1.32-.065-1.75-.426-5.537-.543-3.556-.11-9.035-.04-10.338.447-1.584-.52-3.85-1.06-5.845-1.144-3.07-.131-4.978-.197-6.918-.293-.66-.032-1.05.004-1.356.033z" enable-background="new" fill="#bcb786"/>
+ <g transform="rotate(2.568 -22364 20373)" clip-path="url(#kn)" enable-background="new" filter="url(#km)">
+ <path d="M229.94-409.12c-3.558.05-9.024.36-10.303.904-1.606-.447-3.903-.881-5.9-.877a979.03 979.03 0 0 1-6.907 0c-.66-.003-1.048.068-1.353.11v1.096c.12-.18.393-.69.95-.767.747-.103 5.17-.151 7.31-.11 1.775.035 4.455.274 6.39.96.32.113.618.273.891.41 1.964.987 7.944 4.302 7.944 4.302s-6.633-3.948-7.483-4.439c-.203-.117-.575-.258-1.036-.41 1.22-.449 5.076-.62 7.828-.713 3.024-.102 3.348-.09 5.41.192 2.13.29 3.34.602 3.34.602s-.08-.64 1.035-.794c.748-.103 5.17-.152 7.31-.11 2.07.04 5.366.407 7.282 1.37 1.003.504 3.035 1.569 4.795 2.536l.096-.02s-3.58-2.162-4.43-2.653c-.204-.117-.575-.258-1.037-.411 1.22-.448 5.047-.62 7.8-.712 3.024-.102 3.347-.09 5.41.191 1.954.267 3.013.53 3.195.576l-.027-.312a8.503 8.503 0 0 0-1.4-.357c-1.301-.235-3.4-.602-5.51-.564-3.571.064-9.052.356-10.302.904-1.606-.447-3.877-.881-5.871-.877-3.072.007-4.994.01-6.936
+0-1.943-.009-1.713.28-2.936.274-1.322-.005-1.766-.354-5.555-.301M206.2-407.48c1.92.817 4.577 2.193 6.159 3.397s2.908 1.774 5.555 3.918c.885.718 1.748 1.35 2.591 1.922l.541-.19a57.511 57.511 0 0 1-2.269-1.622c-2.822-2.12-3.627-2.81-6.015-4.274s-4.1-2.366-6.562-3.15" enable-background="new"/>
+ <path d="M237.8-407.48c1.92.817 4.606 2.193 6.188 3.397.813.62 1.558 1.07 2.45 1.654l.65-.116a40.414 40.414 0 0 0-2.697-1.784c-2.389-1.465-4.128-2.366-6.59-3.151" enable-background="new"/>
+ </g>
+ <g transform="rotate(6.561 -6814.9 734.73)" clip-path="url(#kl)">
+ <path d="M1056.2-278.8c4.145-1.479 10 3.125 10 3.125.899.28 2.725-.894 2.624-1.686 0 0-1.55-1.86-.374-2.939s5.296 1.507 7.5 1.625 5.562-.23 7-.75 1.113-1.425 2.625-1.75 5.119 1.038 7.06 1.169 4.649.334 5.815-.169.178-1.16 1.875-1.875 7.76-.957 9.625-.125 1.81.52 2.625 3 7.44 5.163-1.125 13.375-59.378 13.786-65.625 2.75 6.23-14.271 10.375-15.75z" enable-background="new" filter="url(#kk)" opacity=".75"/>
+ <path d="M1058.5-275.43c4.145-1.479 10 3.125 10 3.125.899.28 2.725-.894 2.624-1.686 0 0-1.55-1.86-.374-2.939s5.296 1.507 7.5 1.625 5.562-.23 7-.75 1.113-1.425 2.625-1.75 5.119 1.038 7.06 1.169 4.649.334 5.815-.169.178-1.16 1.875-1.875 7.76-.957 9.625-.125 1.81.52 2.625 3 7.44 5.163-1.125 13.375-59.378 13.786-65.625 2.75 6.23-14.271 10.375-15.75z" enable-background="new" filter="url(#kj)" opacity=".75"/>
+ </g>
+ </g>
+ <path d="M676.821 543.52c-3.804-25.264-16.81-50.638-17.157-75.525-.186-13.356 3.273-26.571 13.756-39.554 36.347-65.296 116.94-84.695 185.93-91.465 86.922-11.017 184.91 17.94 233.37 95.401 54.124 75.733 56.675 172.54 80.612 259.53 29.438 127.13 54.779 256.21 60.392 386.85-3.063 78.182-8.426 165.18-60.503 228.13-48.026 50.357-122.79 50.053-187.07 59.002-90.555 4.655-184.35-16.146-261.78-64.198-64.776-37.94-95.73-113.48-97.279-186.02-8.39-79.875 26.392-153.81 51.62-227.16 7.47-82.761 9.413-166.25 9.653-249.38-.837-32.195-7.09-63.817-11.546-95.609z" enable-background="accumulate" fill="#101414"/>
+ <path transform="translate(324.57 331.53)" d="M311.83 415.43l9.9 121.62-60.105 136.47 15.556 174.66c15.613 61.879 32.185 98.669 74.376 117.05 4.32-36.24-38.612-142.96-39.243-189.12-.631-46.184 10.83-108.61 30.678-158.3 20.048-50.192 36.897-44.846 42.125-92.593s-17.426-149.39-17.426-149.39l-55.86 39.598z" clip-path="url(#en)" enable-background="accumulate" fill="#fff" filter="url(#ki)" opacity=".25"/>
+ <path transform="translate(48.571 195.53)" d="m1010 655.49s16.755 37.018 28.702 53.954c11.946 16.936 52.727 56.046 52.727 56.046l52.597-127.59" enable-background="accumulate" fill="url(#kh)"/>
+ <path transform="translate(324.57 331.53)" d="m730.32 536.57c0 8.485 42.548 58.468 42.548 58.468l12.607-28.77-55.154-29.698z" clip-path="url(#kg)" enable-background="accumulate" fill="#fff" filter="url(#kf)" opacity=".08"/>
+ </g>
+ <g transform="translate(498.6 269.37)" clip-path="url(#ke)" enable-background="new">
+ <g transform="translate(-174.03 62.156)" filter="url(#em)">
+ <g filter="url(#i)">
+ <path d="M425.88 476.99c10.805-1.479 24.744 3.354 44.643 3.214s57.453-16.91 82.143-17.143 62.752 12.284 79.286 15 22.848-.158 27.5 7.857 1.927 10.747-10.357 20.714-40.79 12.636-66.071 12.857c-25.282.221-70.381 7.079-95.357 3.93s-56.938-7.824-68.929-17.858-19.851-16.732-17.5-23.929 13.837-3.164 24.643-4.643z" enable-background="new" fill="#fff" fill-rule="evenodd"/>
+ <path d="M343.65 412.6h381.84v181.02H343.65z" enable-background="accumulate" fill="none"/>
+ </g>
+ <g filter="url(#i)">
+ <path d="m861.17 390.2c-10.462 9.714-86.98 19.005-100.71 29.286s-14.753 12.888-12.143 20 6.545 9.406 25.714 8.571 98.571-27.622 98.571-21.429l-11.429-36.429z" enable-background="new" fill="#fff" fill-rule="evenodd"/>
+ <path d="M702.86 344.82h207.89v162.63H702.86z" enable-background="accumulate" fill="none"/>
+ </g>
+ </g>
+ <g enable-background="new" opacity=".18">
+ <g transform="translate(-174.03 62.156)" filter="url(#i)">
+ <path d="M425.88 476.99c10.805-1.479 24.744 3.354 44.643 3.214s57.453-16.91 82.143-17.143 62.752 12.284 79.286 15 22.848-.158 27.5 7.857 1.927 10.747-10.357 20.714-40.79 12.636-66.071 12.857c-25.282.221-70.381 7.079-95.357 3.93s-56.938-7.824-68.929-17.858-19.851-16.732-17.5-23.929 13.837-3.164 24.643-4.643z" enable-background="new" fill="#fff" fill-rule="evenodd"/>
+ <path d="M343.65 412.6h381.84v181.02H343.65z" enable-background="accumulate" fill="none"/>
+ </g>
+ <g transform="translate(-174.03 62.156)" filter="url(#i)">
+ <path d="m861.17 390.2c-10.462 9.714-86.98 19.005-100.71 29.286s-14.753 12.888-12.143 20 6.545 9.406 25.714 8.571 98.571-27.622 98.571-21.429l-11.429-36.429z" enable-background="new" fill="#fff" fill-rule="evenodd"/>
+ <path d="M702.86 344.82h207.89v162.63H702.86z" enable-background="accumulate" fill="none"/>
+ </g>
+ </g>
+ </g>
+ <g transform="translate(48.571 195.53)" fill-rule="evenodd">
+ <path transform="translate(276 136)" d="m582.66-7.418l113.14 86.267 108.89 258.8 38.184 207.89 120.21 91.924s-12.728-287.09-19.799-313.96-149.91-393.15-149.91-393.15l-210.72 62.225z" clip-path="url(#kd)" enable-background="accumulate" filter="url(#kc)" opacity=".75"/>
+ <path d="m964.14 239.6s8.677 10.897 24.107 11.964c15.43 1.068 49.722-39.953 70.179-52.143 20.479-12.204 47.046-26.602 63.929-20.357 16.882 6.245 22.158 26.436 27.857 48.036 5.7 21.6 6.719 61.814-2.679 92.857-9.397 31.043-50.502 73.104-65.356 103.39s-11.607 39.821-11.607 39.821" enable-background="accumulate" fill="url(#el)"/>
+ <path d="m1124.5 207.63c-15.893-0.893-49.719 12.106-66.071 24.286-16.439 12.244-29.221 24.114-29.286 52.143-0.065 28.206 13.119 39.076 29.107 46.964s33.686 7.12 51.964-11.786c18.278-18.905 14.286-111.61 14.286-111.61z" enable-background="new" fill="url(#ek)"/>
+ <ellipse transform="matrix(.94347 -.12399 .14401 1.0958 451.95 134.6)" cx="385" cy="237.01" rx="86.429" ry="73.929" clip-path="url(#kb)" enable-background="accumulate" fill="url(#ef)" filter="url(#je)" opacity=".75"/>
+ <path transform="translate(450.03 73.844)" d="m527.61 407.45s-122.04 38.403-187.51 9.632c-65.473-28.772-74.377-124.72-74.377-124.72s73.382-80.504 129.92-83.615c55.827-3.072 90.574 20.143 114.87 65.852 24.352 45.813 17.101 132.85 17.101 132.85z" enable-background="accumulate" fill="url(#jd)" mask="url(#jc)"/>
+ <path d="m772.17 393.35s36.218-27.382 51.607-35.893c15.177-8.393 25.714-11.607 35.893-11.607l-15.536 66.964" enable-background="accumulate" fill="url(#ee)"/>
+ <circle transform="translate(449.5 74.915)" cx="409.29" cy="306.65" r="36.25" enable-background="accumulate" fill="url(#ed)"/>
+ <path transform="translate(276 136)" d="m311.83 415.43l9.9 121.62-60.105 136.47 15.556 174.66c15.613 61.879 32.185 98.669 74.376 117.05 4.32-36.24 8.682-72.368-31.243-223.12l17.678-69.296 72.125-138.59-42.426-158.39-55.86 39.598z" clip-path="url(#en)" enable-background="accumulate" fill="#fff" filter="url(#jb)" opacity=".3"/>
+ <path d="m635.21 581.13c-14.142 12.728 39.233 34.58 76.368 24.042s104.64-35.564 103.24-79.196c-1.407-43.632-76.368-128.69-76.368-128.69l-103.24 183.85z" enable-background="accumulate" filter="url(#ja)" opacity=".5"/>
+ <circle transform="translate(449.67 74.915)" cx="410" cy="306.65" r="23.214" enable-background="accumulate" fill="url(#ec)"/>
+ <circle transform="translate(452 73.487)" cx="414.29" cy="303.08" r="7.5" enable-background="accumulate" fill="#fff" filter="url(#iz)" stroke="#000" stroke-linejoin="bevel"/>
+ <path d="m789.32 478.35s7.023 19.569-1.071 35-42.323 38.988-67.5 50c-25.31 11.07-85.473 32.964-101.79 41.964-16.461 9.082-18.214 12.679-18.214 12.679s-7.147-19.064 28.75-51.786c36.172-32.972 142.03-48.05 159.82-87.857z" enable-background="accumulate" fill="url(#eb)"/>
+ </g>
+ <g enable-background="new">
+ <g transform="translate(829.32 270.09)" fill-rule="evenodd">
+ <path transform="translate(-329.81)" d="M179.64 267.36c-22.41 39.703-60.616 115.78-69.286 149.64-8.647 33.775-8.772 66.417-.357 86.429 8.36 19.882 26.164 35.633 40.714 41.429-.597-14.376 14.373-43.286 72.857-72.5 58.626-29.285 78.382-27.131 103.57-47.143 25.63-20.362 8.206-79.647 3.214-93.929s-1.236-3.38-1.946-5.093c-10.689-25.816-34.214-54.43-64.483-64.55s-65.018-4.848-84.286 5.714z" clip-path="url(#ea)" fill="url(#m)"/>
+ <ellipse transform="rotate(28.068 -88.085 -332.1)" cx="183.57" cy="338.08" rx="64.716" ry="134.01" enable-background="accumulate" fill="url(#dz)"/>
+ <ellipse transform="rotate(28.068 -43.578 -333.81)" cx="183.57" cy="338.08" rx="64.716" ry="134.01" enable-background="accumulate" fill="url(#iy)"/>
+ </g>
+ <path transform="translate(499.51 270.09)" d="M179.64 267.36c-22.41 39.703-60.616 115.78-69.286 149.64-8.647 33.775-8.772 66.417-.357 86.429 8.36 19.882 26.164 35.633 40.714 41.429-.597-14.376 14.373-43.286 72.857-72.5 58.626-29.285 78.382-27.131 103.57-47.143 25.63-20.362 8.206-79.647 3.214-93.929s-1.236-3.38-1.946-5.093c-10.689-25.816-34.214-54.43-64.483-64.55s-65.018-4.848-84.286 5.714z" clip-path="url(#ea)" enable-background="new" fill="none" filter="url(#ix)" stroke="url(#l)" stroke-width="20.8"/>
+ </g>
+ <g transform="translate(48.571 195.53)" fill-rule="evenodd">
+ <circle transform="translate(452.56 72.581)" cx="310.71" cy="398.08" r="19.704" enable-background="accumulate" stroke="#000" stroke-linejoin="bevel"/>
+ <circle transform="translate(450.56 72.581)" cx="310.71" cy="398.08" r="19.704" enable-background="accumulate" fill="url(#m)" filter="url(#iw)" stroke="url(#l)" stroke-width="20.8"/>
+ <circle transform="translate(450.56 72.581)" cx="310.71" cy="398.08" r="19.704" enable-background="accumulate" fill="url(#dy)"/>
+ <ellipse transform="rotate(-4.471 1823.1 -5529.2)" cx="429.57" cy="377.43" rx="72.08" ry="44.548" enable-background="accumulate" fill="url(#dx)" filter="url(#iv)"/>
+ <ellipse transform="matrix(1.4358 -.07 .07 1.4358 235.18 -63.865)" cx="437.7" cy="391.22" rx="36.612" ry="22.627" enable-background="accumulate" fill="url(#dw)" filter="url(#iu)"/>
+ <g transform="translate(450.03 73.844)" enable-background="new" filter="url(#it)">
+ <circle cx="413.66" cy="401.83" r="3.214" enable-background="accumulate" stroke="url(#dv)"/>
+ <circle transform="translate(13.125 8.125)" cx="413.66" cy="401.83" r="3.214" enable-background="accumulate" stroke="url(#du)"/>
+ <circle transform="translate(32.946 7.5)" cx="413.66" cy="401.83" r="3.214" enable-background="accumulate" stroke="url(#ej)"/>
+ <circle transform="translate(24.911 -10.268)" cx="413.66" cy="401.83" r="3.214" enable-background="accumulate" stroke="url(#ei)"/>
+ <circle transform="translate(47.589 -.625)" cx="413.66" cy="401.83" r="3.214" enable-background="accumulate" stroke="url(#eh)"/>
+ </g>
+ </g>
+ <g fill="none" stroke="#000">
+ <path d="M944.771 678.46c.985 4.35 4.537 6.18 7.387 7.892 4.46 2.513 6.52 1.522 9.154-.758 1.602-1.921 10.683-4.698 15.594-7.07 4.33-1.46 8.904-5.36 13.385-8.335 3.395-1.627 5.347.355 7.829 1.01 2.944.717 4.411 2.172 6.06 3.536 2.397 1.175-.927 3.143 3.284 4.293 1.19.218 2.417.577 3.283-.505" enable-background="new"/>
+ <path d="M959.421 670.88c2.315-.032 3.178.643 5.493-.82 3.455-3.082 5.402-3.146 7.955-4.42 3.026-1.315 6.535 8.152 10.102 9.849 2.395-.822 1.289 1.794 1.452 2.651.057 2.647 2.807 3.679 4.356 5.43 3.316 2.256 7.375 6.296 11.112 5.303 6.445-2.93 10.28-1.281 16.29-7.386.703-1.182-.585-6.895 3.093-7.198 2.524.254 4.166.05 6.06.569 5.442 2.117 7.738 6.45 14.71 7.955 6.184.966 7.613 3.794 13.89 5.05M925.551 679.05c2.399-.794 6.106 4.192 8.173 7.046.593 2.68 1.154 5.486.758 12.122.785 2.417 2.68 3.03 4.798 3.283 3.117-.537 5.877-1.325 7.324-3.03 1.871-1.943 5.312 2.393 8.08 4.04 3.61 1.912 7.775 1.979 11.87 2.273 1.703-.231 2.37 4.515 3.283 8.08.384 4.379-.886 6.896-1.768 9.85-.294 2.496 2.988 3.53 6.313 4.545 3.183.742 6.545 1.662 9.092 1.768 5.142.875 8.088 2.69 12.122 4.04 2.239.817 3.26 2.243 4.545 3.536" enable-background="new"/>
+ </g>
+ <g fill-rule="evenodd">
+ <path transform="translate(324.57 331.53)" d="m332 187.7s57.5-25.5 57.5-28 5.5-52 5.5-52 91-48.5 91.5-50.5 86-62 86-62l-186 22-75.5 106z" clip-path="url(#jz)" enable-background="new" fill="#fff" filter="url(#jy)" opacity=".25"/>
+ <path d="m1745.9 918.08s-115.97 73.539-123.04 77.782c-7.071 4.243-230.52 137.18-230.52 137.18l4.243 39.598 216.37-100.41 117.38-101.82 15.556-52.326z" enable-background="accumulate" fill="#fff" opacity=".25"/>
+ <path transform="translate(324.57 331.53)" d="m528.92 556.85c-5.657-1.414-181.02 74.953-181.02 74.953l-33.941 181.02 51.095 193.95 257.2 67.681s206.48 152.74 212.13 148.49c5.657-4.243 168.29-193.75 168.29-193.75l-159.81-183.85-46.669-178.19-267.29-110.31z" clip-path="url(#jx)" enable-background="accumulate" filter="url(#eg)" opacity=".5"/>
+ <path d="m1146.2 809.42s22.62-6.507 35.743-5.873 30.642 1.939 43.709 12.186c13.067 10.248 25.068 27.14 34.112 58.37 9.045 31.23 1.698 99.252-6.176 143.35-7.874 44.095-28.265 106.11-45 140-16.735 33.887-49.798 77.495-60.57 89.876-11.363 13.062-56.205 36.426-79.43 42.267 5.303-10.607 48.9-50.589 35-60.714-14.02-10.212-45.76 45.982-84.293 29.033 21.382-13.132 41.779-51.186 34.04-66.594-7.84-15.61-30.704 48.758-93.535 37.013 30.052-27.527 55.407-70.904 41.263-82.98-14.415-12.307-60.462 54.293-60.462 54.293s-2.822-41.7 13.773-68.607c16.639-26.978 79.653-81.615 99.553-111.7 19.9-30.088 33.613-66.009 42.136-92.518s15.8-77.1 15.8-77.1" enable-background="new" fill="#0c0c0c"/>
+ <path transform="translate(324.57 331.53)" d="m770.75 609.18l-50.912 97.581-79.903 111.02 34.648 71.418 42.426 79.196 72.125-45.255 14.142-192.33 21.213-138.59-14.142-90.156-39.598 107.13z" clip-path="url(#jw)" enable-background="accumulate" fill="#fff" filter="url(#jv)" opacity=".25"/>
+ <path transform="translate(324.57 331.53)" d="m295 846.2l6.645-68.923s90.32 89.005 162.36 122.92 308 62 308 62l154-26-36 162-286 26-298-89-11-189z" clip-path="url(#ju)" enable-background="accumulate" filter="url(#eg)"/>
+ <path transform="translate(498.6 269.37)" d="m405.8 845.99l74.953 65.054 2.5 16.88 19.403 10.159 6.492 23.051 31.709-8.371 14.849 48.083c12.257 12.728 89.793-113.11 55.86 38.184l-60.81 16.264-89.203-94.693-62.825-53.8 7.07-60.811z" clip-path="url(#jt)" enable-background="new" fill="#fff" filter="url(#o)"/>
+ <path d="m1207.9 1113.9c54.286-1.429 126.04-15.052 170-26.786 44.053-11.757 125.89-36.347 175.36-57.857 49.339-21.453 113.6-59.282 154.29-92.143 40.508-32.721 52.39-55.82 60.714-33.571 8.37 22.368-16.407 56.326-37.857 81.071-21.604 24.923-52.731 52.705-98.929 89.286s-156.08 101.58-212.86 128.57c-57.066 27.125-128.2 58.238-172.14 72.5s-131.43 31.071-131.43 31.071l92.857-192.14z" enable-background="accumulate" fill="#121212"/>
+ <path transform="translate(498.6 269.37)" d="m1241.6 652.95s-64.722 54.337-145.66 98.995c-82.024 45.255-284.26 93.338-284.26 93.338s-15.101 21.052 45.255 28.284 224.08-53.301 278.6-96.167 120.21-111.72 120.21-111.72l-14.142-12.728z" clip-path="url(#js)" enable-background="accumulate" fill="url(#jr)" filter="url(#jq)" opacity=".5"/>
+ </g>
+ <g transform="translate(498.6 269.37)" clip-path="url(#jp)" enable-background="new">
+ <g filter="url(#em)">
+ <g transform="translate(-174.03 62.156)" filter="url(#i)">
+ <path d="m1268.3 663.77s-0.296 26.161 4.643 37.857 20.038 26.487 28.572 31.429 18.929 8.571 18.929 8.571l117.86-115 17.857-75.714-96.43 38.571-91.428 74.286z" enable-background="new" fill="#fff" fill-rule="evenodd"/>
+ <path d="M1197.8 486.14h333.75v309.71H1197.8z" enable-background="accumulate" fill="none"/>
+ </g>
+ </g>
+ <g transform="translate(-174.03 62.156)" enable-background="new" filter="url(#i)" opacity=".18">
+ <path d="m1268.3 663.77s-0.296 26.161 4.643 37.857 20.038 26.487 28.572 31.429 18.929 8.571 18.929 8.571l117.86-115 17.857-75.714-96.43 38.571-91.428 74.286z" enable-background="new" fill="#fff" fill-rule="evenodd"/>
+ <path d="M1197.8 486.14h333.75v309.71H1197.8z" enable-background="accumulate" fill="none"/>
+ </g>
+ </g>
+ <path transform="translate(498.6 269.37)" d="M1264.2 605c-4.491.733-8.157 3.455-11.938 6.406-10.081 7.87-28.17 34.425-48.031 50.47-39.867 32.202-104 69.976-152.56 91.093-48.614 21.137-130.54 45.818-174.31 57.5-43.398 11.582-115.04 25.131-168.25 26.531l-4.562.125-2 4.125-92.844 192.12-6.5 13.47 14.656-2.845s87.27-16.65 132.34-31.28c44.725-14.518 115.79-45.668 173.03-72.876 57.603-27.38 166.94-91.98 214.28-129.47 46.36-36.71 77.805-64.717 99.938-90.25 10.9-12.576 22.745-27.53 31.03-42.75 8.287-15.219 19.16-44.218 13.688-58.844-1.218-3.254-2.552-6.06-4.594-8.5s-8.475-1.572-8.563-5.03c-.21-8.266-3.315-.245-4.812 0zm2.156 15.219c.415.586 1.031 1.558 1.782 3.563 2.896 7.742-1.441 31.899-8.813 45.438s-22.638 28.924-33.188 41.094c-21.075 24.314-51.904 51.862-97.938 88.312-45.05 35.672-155.46 101.09-211.41 127.69-56.892 27.042-128.1 58.118-171.25 72.125-36.365 11.803-95.845 23.834-115.72
+27.78l84.281-174.47c54.707-2.049 123.79-15.215 167.12-26.78 44.334-11.832 126.08-36.336 176.41-58.22 50.112-21.788 112.53-61.167 154.03-94.687 20.646-16.677 41.745-42.546 49.813-48.844 2.437-1.903 4.08-2.636 4.875-3z" clip-path="url(#jo)" enable-background="accumulate" fill="#050505" fill-rule="evenodd" filter="url(#jn)" opacity=".833"/>
+ <g transform="rotate(6.561 -6814.9 734.74)" enable-background="new" fill-rule="evenodd" mask="url(#jm)">
+ <path d="M1111.48-285.971l-3.937 1.875c-.041.01-.1.02-.125.031-.42.213-.165.1-.657.312-.486.21-1.737.585-4.093 1.47-3.332 1.25-5.805 2.15-7 3.062-1.537.021-3.72.233-5.657.719a227.677 227.677 0 0 1-6.75 1.593c-1.894.42-1.675.642-2.875.875-1.296.252-1.721-.009-5.437.782-3.49.742-8.895 1.93-10.156 2.687-1.584-.18-3.868-.322-5.844-.031-3.04.447-4.916.673-6.844.906-.655.08-1.04.2-1.343.281-.427.132-.686.26-1.375.344-1.312.16-1.763-.157-5.532.281-3.554.413-9.005 1.273-10.25 1.938-1.599-.297-3.857-.534-5.843-.344-3.06.293-4.972.484-6.907.656-1.934.173-1.688.423-2.906.532-1.316.117-1.76-.164-5.531.25-3.542.388-9.008 1.209-10.281 1.875-1.6-.295-3.887-.507-5.875-.313-3.058.3-4.941.48-6.875.656-.658.06-1.04.179-1.344.25-.428.12-.683.218-1.375.282-1.316.12-1.76-.195-5.531.218-3.556.39-9.006 1.24-10.25
+1.907-1.599-.295-3.86-.524-5.844-.313-3.056.325-4.974.526-6.906.719s-1.69.44-2.906.562c-1.315.132-1.763-.164-5.532.282-3.538.418-8.977 1.292-10.25 1.968-1.597-.28-3.86-.42-5.843-.187-3.052.358-4.945.568-6.875.781-.657.073-1.041.173-1.344.25-.427.127-.685.267-1.375.344-1.314.146-1.768-.174-5.531.312-3.55.46-8.979 1.42-10.22 2.125-1.592-.244-3.833-.381-5.812-.125-3.047.395-4.95.649-6.875.907-1.924.257-1.726.493-2.937.656-1.31.176-1.748-.105-5.5.469-3.525.538-8.924 1.699-10.188 2.437-1.588-.203-3.846-.255-5.813.094-3.026.536-4.899.861-6.812 1.187-.65.111-1.014.271-1.313.375-.42.165-.663.332-1.344.469-1.294.262-1.727-.006-5.437.813-3.499.771-8.846 2.382-10.062 3.218-1.563-.077-3.758.086-5.688.594-2.972.783-4.817 1.232-6.687 1.75s-1.667.767-2.844 1.094c-1.272.353-1.697.107-5.344 1.187-3.424 1.015-8.65 2.934-9.875 3.844-1.539.013-3.72.272-5.625.875-2.93.928-4.75 1.459-6.594
+2.063-.626.205-.991.392-1.28.53-.408.215-.654.41-1.313.626-1.255.411-1.686.189-5.281 1.437-3.39 1.178-8.595 3.214-9.782 4.157-1.524.06-3.65.395-5.53 1.062-2.898 1.028-4.7 1.676-6.532 2.313-1.832.637-1.628.848-2.781 1.25-1.247.434-1.664.2-5.22 1.562-3.338 1.28-8.486 3.483-9.687 4.469-1.507.108-3.635.499-5.5 1.219a1047.26 1047.26 0 0 1-6.437 2.469c-.617.233-.997.442-1.281.593v.031l-8 3.188-12.476 3.492 7.93 19.278c-.592 1.973 12.545-4.739 12.545-4.739.227-.144.45-.272.72-.375 1.08-.41 2.17-.215 6-1.687 3.828-1.472 5.223-2.005 5.905-2.406.68-.4 1.612-.88 2.22-1.531 1.826-.138 3.57-.494 4.937-1 2.968-1.1 4.875-1.807 6.78-2.47 1.907-.662 2.355-1.414 3.407-1.78 1.092-.38 2.195-.166 6.063-1.532 3.867-1.366 5.283-1.827 5.968-2.218.702-.4 1.701-.933 2.313-1.594 1.97-.055 3.817-.385 5.281-.875 3.002-1.005 4.926-1.622 6.844-2.25 1.538-.504 2.174-1.047 2.906-1.438.23-.134.476-.253.75-.343 1.098-.36
+2.181-.082 6.094-1.313 3.912-1.231 5.366-1.673 6.062-2.031.694-.357 1.63-.793 2.25-1.406 1.866-.023 3.636-.267 5.032-.688 3.03-.913 4.992-1.43 6.937-1.969 1.945-.538 2.426-1.264 3.5-1.562 1.114-.31 2.22.007 6.188-1.031 3.967-1.039 5.417-1.433 6.125-1.75.734-.33 1.813-.754 2.437-1.375 1.998.116 3.857-.02 5.344-.375 3.078-.735 5.083-1.101 7.062-1.5 1.588-.32 2.245-.79 3-1.094a3.4 3.4 0 0 1 .75-.25c1.134-.23 2.305.209 6.344-.5 4.04-.71 5.5-.927 6.219-1.188.716-.26 1.704-.567 2.344-1.093 1.924.239 3.748.224 5.187 0 3.127-.488 5.155-.701 7.156-.97 2.002-.267 2.49-.944 3.594-1.093 1.147-.154 2.276.302 6.344-.219 4.068-.52 5.56-.695 6.281-.937.737-.247 1.798-.586 2.438-1.125 2.05.335 3.973.398 5.5.218 3.142-.368 5.18-.559 7.187-.78 1.611-.179 2.265-.609 3.031-.845.241-.085.495-.155.782-.187 1.15-.128 2.301.347 6.375-.125s5.559-.61 6.28-.844c.72-.232 1.701-.473 2.345-.969 1.936.334 3.77.405
+5.219.25 3.146-.334 5.177-.518 7.187-.718 2.01-.2 2.484-.827 3.594-.938 1.15-.115 2.296.365 6.375-.062s5.589-.562 6.312-.782c.74-.223 1.796-.513 2.438-1.03 2.057.398 4.002.493 5.531.343 3.149-.308 5.176-.473 7.188-.656 1.614-.147 2.263-.56 3.03-.781.242-.081.494-.13.782-.157 1.152-.105 2.293.393 6.375 0s5.589-.53 6.312-.75c.721-.218 1.7-.447 2.344-.937 1.938.35 3.769.454 5.219.312 3.149-.308 5.176-.473 7.187-.656 2.012-.183 2.515-.838 3.625-.937 1.153-.104 2.293.384 6.375 0 4.083-.385 5.59-.501 6.313-.72.74-.222 1.796-.514 2.437-1.03 2.058.401 4.003.503 5.532.343 3.146-.328 5.177-.522 7.187-.718 1.613-.158 2.266-.632 3.031-.875.241-.088.464-.122.75-.157 1.149-.14 2.317.34 6.375-.25 4.059-.59 5.562-.777 6.282-1.03.716-.254 1.674-.559 2.312-1.095 1.92.212 3.72.152 5.156-.093 3.12-.533 5.112-.929 7.094-1.313 1.982-.384 2.474-1.04 3.563-1.281 1.128-.25 2.27.116 6.25-.875s5.43-1.42
+6.125-1.781c.722-.376 1.761-.87 2.375-1.531 1.963-.012 3.793-.292 5.218-.844 2.952-1.145 4.874-1.87 6.688-2.75 1.456-.707 2.32-1.702 2.531-2 .212-.298.1-.729.125-.75.043-.035.34-.094.5-.438.86-1.847 2.323-5.627 2.438-6.312.113-.682.168-1.353.218-1.75.03-.23-.147-.88-.125-.938.031-.082.289-.25.344-.5.266-1.198.09-2.207-.125-3.625-.214-1.417-.972-4.614-1.625-5.469-.659-.861-1.225-1.01-1.75-1z" enable-background="new" fill="#bcb786"/>
+ <g clip-path="url(#jl)">
+ <path d="M1107.4-284.05c-.419.213-.156.094-.647.306-.486.21-1.724.574-4.08 1.459-3.33 1.25-5.83 2.153-7.026 3.066-1.536.021-3.72.233-5.656.719a227.709 227.709 0 0 1-6.75 1.593c-1.895.42-1.676.643-2.875.875-1.297.252-1.721-.009-5.438.782-3.49.742-8.894 1.93-10.156 2.687-1.583-.18-3.867-.322-5.843-.031-3.04.447-4.917.673-6.844.906-.655.08-1.041.201-1.344.282-.426.131-.686.26-1.375.343-1.311.16-1.762-.157-5.531.282-3.554.413-9.005 1.272-10.25 1.937-1.599-.297-3.858-.534-5.844-.344-3.059.294-4.972.484-6.906.657-1.934.172-1.689.422-2.906.53-1.317.118-1.76-.163-5.532.25-3.541.39-9.007 1.21-10.28 1.876-1.6-.295-3.888-.507-5.876-.313-3.058.3-4.94.48-6.875.657-.657.06-1.04.178-1.343.25-.428.118-.684.218-1.375.28-1.316.121-1.76-.194-5.532.22-3.556.39-9.005 1.239-10.25
+1.906-1.598-.294-3.86-.524-5.843-.313-3.056.326-4.974.526-6.907.719-1.932.192-1.69.44-2.906.562-1.315.132-1.763-.164-5.53.282-3.54.418-8.979 1.292-10.25 1.969-1.599-.282-3.86-.42-5.845-.188-3.052.358-4.945.568-6.875.781-.656.073-1.04.173-1.344.25-.426.127-.684.267-1.375.344-1.313.146-1.767-.174-5.53.313-3.55.458-8.98 1.419-10.22 2.125-1.593-.245-3.834-.382-5.812-.125-3.048.394-4.95.648-6.875.906-1.925.258-1.726.493-2.938.656-1.31.176-1.747-.104-5.5.469-3.524.538-8.923 1.699-10.188 2.437-1.587-.203-3.845-.254-5.812.094-3.026.536-4.9.862-6.813 1.187-.65.111-1.013.271-1.312.375-.42.165-.664.332-1.344.47-1.295.26-1.727-.007-5.438.812-3.498.772-8.846 2.383-10.062 3.219-1.562-.078-3.757.085-5.687.593-2.972.783-4.818 1.232-6.688 1.75s-1.666.768-2.843 1.094c-1.273.353-1.697.107-5.344 1.188-3.425 1.014-8.65 2.933-9.875 3.843-1.539.013-3.72.273-5.625.875-2.931.928-4.75 1.459-6.594
+2.063-.627.205-.992.392-1.281.531-.408.214-.653.409-1.313.625-1.254.412-1.686.19-5.28 1.438-3.39 1.177-8.596 3.213-9.782 4.156-1.524.06-3.65.395-5.531 1.062-2.898 1.029-4.7 1.676-6.531 2.313-1.833.637-1.628.848-2.782 1.25-1.246.434-1.663.2-5.218 1.562-3.34 1.28-8.488 3.483-9.688 4.47-1.507.107-3.636.498-5.5 1.218a1044.752 1044.752 0 0 1-6.437 2.469c-.617.233-.997.442-1.282.593v1.094c.112-.222.386-.817.907-1.094.698-.37 4.813-1.993 6.812-2.718 1.657-.602 4.154-1.329 5.969-1.313.302.003.588.051.844.094 1.842.308 7.468 1.562 7.468 1.562s-6.233-1.646-7.03-1.843c-.191-.048-.536-.07-.97-.063 1.146-.87 4.762-2.393 7.344-3.437 2.839-1.148 3.117-1.252 5.063-1.657 2.008-.417 3.156-.5 3.156-.5s-.082-.6.969-1.125c.705-.351 4.887-1.892 6.906-2.562 1.952-.648 5.057-1.359 6.875-1 1.863.367 7.531 1.812 7.531 1.812s-6.287-1.87-7.094-2.093c-.193-.054-.53-.086-.968-.094 1.158-.833 4.794-2.195 7.406-3.156
+2.87-1.056 3.167-1.162 5.125-1.532 1.853-.35 2.859-.425 3.031-.437.114-.217.377-.81.906-1.063.71-.338 4.926-1.712 6.97-2.312 1.692-.497 4.24-1.037 6.093-.906.308.021.613.097.875.156 1.881.424 7.594 2.031 7.594 2.031s-6.342-2.065-7.157-2.312c-.194-.06-.557-.104-1-.125 1.17-.798 4.863-2.057 7.5-2.938 2.898-.968 3.233-1.003 5.22-1.281 2.049-.287 3.187-.313 3.187-.313s-.073-.607 1-1.062c.72-.306 4.99-1.5 7.062-2 2.003-.483 5.199-.928 7.063-.406 1.91.535 7.719 2.5 7.719 2.5s-6.423-2.424-7.25-2.72c-.198-.07-.583-.14-1.032-.187 1.188-.728 4.916-1.774 7.594-2.5 2.944-.797 3.292-.77 5.313-.906 1.913-.128 2.947-.07 3.125-.062.117-.204.391-.78.937-.97.732-.253 5.079-1.047 7.188-1.374 1.748-.271 4.4-.485 6.312-.094.318.065.605.186.875.281 1.94.69 7.844 3.094 7.844 3.094s-6.535-2.95-7.375-3.312c-.201-.087-.575-.167-1.031-.25 1.206-.633 5.03-1.396 7.75-1.906 2.99-.562 3.3-.53 5.344-.532 2.109-.002
+3.312.125 3.312.125s-.073-.63 1.031-.937c.74-.206 5.126-.834 7.25-1.063 2.053-.22 5.319-.252 7.22.47 1.947.738 7.843 3.374 7.843 3.374s-6.563-3.179-7.406-3.562c-.202-.092-.543-.187-1-.282 1.21-.602 4.984-1.248 7.718-1.656 3.005-.448 3.326-.452 5.375-.406 1.94.043 3.007.194 3.188.219.119-.194.384-.766.937-.907.743-.188 5.155-.734 7.282-.937 1.763-.169 4.42-.234 6.343.25.32.08.604.203.875.312 1.953.784 7.907 3.47 7.907 3.47s-6.592-3.254-7.438-3.657c-.202-.096-.572-.207-1.031-.313 1.214-.574 5.044-1.122 7.781-1.5 3.009-.415 3.323-.442 5.375-.375 2.118.07 3.313.25 3.313.25s-.078-.637 1.03-.906c.745-.18 5.153-.663 7.282-.844 2.059-.174 5.343-.124 7.25.657 1.955.8 7.875 3.53 7.875 3.53s-6.56-3.308-7.406-3.718c-.202-.098-.572-.203-1.031-.312 1.215-.564 5.01-1.115 7.75-1.47 3.01-.389 3.321-.397 5.375-.312 1.944.08 3.006.254 3.187.282.12-.191.383-.746.938-.875.744-.174 5.15-.65 7.28-.813
+1.767-.134 4.45-.126 6.376.375.32.083.603.201.875.313 1.954.8 7.906 3.562 7.906 3.562s-6.591-3.34-7.437-3.75c-.203-.098-.572-.203-1.032-.312 1.215-.564 5.042-1.084 7.782-1.438 3.01-.39 3.352-.429 5.406-.344 2.12.088 3.312.313 3.312.313s-.078-.65 1.032-.906c.744-.173 5.15-.624 7.28-.782 2.061-.152 5.344-.096 7.25.688 1.956.804 7.876 3.5 7.876 3.5s-6.56-3.276-7.406-3.688c-.203-.098-.572-.202-1.032-.312 1.216-.562 5.012-1.128 7.75-1.5 3.01-.41 3.323-.416 5.375-.344 1.943.068 3.008.165 3.188.188.119-.195.384-.73.937-.875.742-.197 5.131-.83 7.25-1.094 1.757-.22 4.406-.333 6.313.031.317.06.606.19.875.281 1.936.661 7.844 2.938 7.844 2.938s-6.537-2.807-7.375-3.156c-.2-.084-.577-.174-1.032-.25 1.204-.651 5.02-1.372 7.72-2 2.966-.69 3.288-.756 5.312-.875 2.088-.124 3.28-.032 3.28-.032s-.086-.632 1-1.03c.73-.269 5.048-1.339 7.126-1.813 2.008-.46 5.168-1.03 7-.625 1.878.414 13.578 3.015 13.578
+3.015s-12.328-3.022-13.141-3.265c-.195-.058-.559-.107-1-.125 1.167-.804 3.514-1.688 6.11-2.703 1.68-.659.923-.377 2.775-1.004 1.754-.594 2.486-1.01 2.63-1.113.347-.207-.355-.122-.544-.042z" enable-background="new" filter="url(#jk)"/>
+ <path d="m1082.6-275.12c1.873 0.393 4.496 1.146 6.031 1.969s2.822 1.056 5.375 2.5c2.527 1.43 4.796 2.007 6.969 2.531 2.348 0.566 5.435 0.715 8.844 1.188-1.09-0.84-6.608-1.173-8.406-1.563-1.8-0.39-3.895-1.016-6.594-2.313-2.7-1.296-3.495-1.799-5.813-2.687-2.318-0.889-4.004-1.383-6.406-1.625z" enable-background="new" filter="url(#jj)"/>
+ <path d="M1051.5-270c1.905.578 4.528 1.616 6.094 2.594 1.565.978 2.88 1.36 5.5 3.125 2.593 1.747 4.986 2.71 7.25 3.594 2.446.955 5.682 1.657 9.406 3.062-1.19-1.138-7.063-2.687-8.938-3.375-1.874-.688-4.081-1.566-6.874-3.281-2.794-1.715-3.574-2.284-5.938-3.406-2.364-1.123-4.057-1.835-6.5-2.313z" enable-background="new" filter="url(#ji)"/>
+ <path d="m1020.2-266.84c1.912 0.638 4.581 1.755 6.156 2.813 1.575 1.057 2.896 1.508 5.531 3.406 2.61 1.878 5.029 3.03 7.313 4.062 2.468 1.116 5.764 2.174 9.531 3.844-1.203-1.222-7.203-3.314-9.094-4.125-1.89-0.81-4.064-1.894-6.874-3.75s-3.622-2.477-6-3.719c-2.379-1.242-4.111-1.975-6.563-2.531z" enable-background="new" filter="url(#jh)"/>
+ <path d="M1110.2-266.89c.15.049.688.631.11 1.484-.81 1.195-5.705 3.325-8.563 4.125-2.845.798-6.29.978-10.562-.375-4.302-1.362-5.47-2.468-10.656-4.312 4.664 2.115 6.195 3.952 10.125 5.344 1.62.574 3.367.94 5.062 1.03-.445.327-1.53.984-3.562 1.595-2.796.84-6.65 1.534-8.25 1.625-1.515.086-3.142-.513-3.438-.625.167.103.374.377-.25 1.03-.899.945-6.147 1.924-9.125 2.25-2.964.326-6.521-.015-10.906-1.905-3.978-1.715-5.339-2.916-9.406-4.75v.156c3.643 2.095 5.284 3.883 8.875 5.562 1.73.81 3.592 1.41 5.406 1.72-.534.286-1.557.71-3.437 1.03-2.87.488-6.81.817-8.438.75-.85-.034-1.728-.184-2.406-.406-.685-.215-1.19-.444-1.312-.5.169.107.43.403-.22 1.031-.909.88-6.245 1.337-9.25 1.47-2.99.131-6.588-.451-11-2.563-4.44-2.127-5.64-3.402-10.905-5.782 4.734 2.597 6.286 4.63 10.344 6.72 1.673.861 3.485 1.493 5.25 1.937-.463.233-1.59.688-3.688.937-2.886.343-6.834.493-8.468.375-1.547-.111-3.232-.857-3.532-1
+.17.12.414.41-.218 1-.913.851-6.244 1.262-9.25 1.375-2.993.113-6.59-.49-11-2.594-4.002-1.908-5.388-3.137-9.47-5.093v.156c3.656 2.204 5.295 4.053 8.907 5.906 1.74.893 3.637 1.528 5.469 1.969-.54.248-1.578.615-3.469.844-2.886.348-6.866.52-8.5.406a9.446 9.446 0 0 1-2.406-.5 12.532 12.532 0 0 1-1.313-.531c.17.112.465.422-.187 1.03-.913.853-6.275 1.294-9.281 1.407-2.993.112-6.594-.528-11-2.594-4.437-2.08-5.647-3.331-10.906-5.656 4.729 2.548 6.29 4.578 10.344 6.625 1.671.844 3.485 1.467 5.25 1.906-.464.235-1.59.684-3.688.938-2.886.348-6.836.57-8.469.469-1.544-.096-3.2-.83-3.5-.97.17.12.382.405-.25 1-.912.861-6.246 1.331-9.25 1.47-2.99.138-6.567-.451-10.969-2.47-3.993-1.83-5.365-3.028-9.437-4.905v.156c3.647 2.133 5.27 3.935 8.875 5.719 1.737.86 3.607 1.45 5.437 1.875-.54.253-1.55.64-3.437.906-2.88.404-6.838.646-8.469.562a9.36 9.36 0 0 1-2.406-.437 12.971 12.971 0 0
+1-1.313-.5c.17.109.432.41-.218 1.031-.911.87-6.25 1.392-9.25 1.563-2.987.17-6.574-.316-10.97-2.282-4.424-1.978-5.605-3.228-10.843-5.375 4.71 2.388 6.27 4.39 10.312 6.344a23.73 23.73 0 0 0 5.218 1.781c-.461.25-1.597.713-3.687 1.032-2.876.438-6.78.733-8.406.687-1.539-.043-3.233-.745-3.532-.875.169.113.411.414-.218 1.031-.908.891-6.203 1.529-9.188 1.813-2.971.283-6.573-.176-10.938-1.938-3.96-1.598-5.329-2.795-9.344-4.312v.156c3.596 1.811 5.239 3.582 8.813 5.156 1.722.759 3.587 1.29 5.406 1.625-.536.28-1.566.688-3.437 1.063-2.856.572-6.79 1.02-8.407 1.031-.844.006-1.706-.08-2.375-.25-.676-.162-1.16-.33-1.28-.375.166.094.422.383-.22 1.062-.897.951-6.186 1.918-9.125 2.438-2.925.518-6.432.374-10.719-1.031-4.315-1.415-5.472-2.53-10.562-3.969 4.577 1.751 6.09 3.56 10.031 5 1.627.594 3.37.956 5.094 1.156-.453.297-1.555.884-3.594 1.469-2.804.805-6.638 1.576-8.218
+1.75-1.495.165-3.117-.317-3.407-.406.164.09.393.36-.218 1.062-.883 1.014-6.045 2.372-8.938 3.063-2.88.687-6.335.76-10.562-.438-3.835-1.086-5.172-2.072-9.062-3.125v.156c3.484 1.395 5.07 2.92 8.53 4.032 1.669.535 3.457.786 5.22.875-.52.352-1.5.914-3.313 1.53-2.765.942-6.59 1.936-8.156 2.157-.818.115-1.633.123-2.281.031-.655-.083-1.133-.218-1.25-.25.162.075.434.34-.188 1.094-.87 1.055-6.01 2.66-8.875 3.438-2.852.774-6.259.958-10.438-.094-4.206-1.06-5.356-2.042-10.344-3.156 4.485 1.46 5.97 3.135 9.813 4.25 1.585.46 3.287.638 4.969.687-.442.337-1.513 1.028-3.5 1.781-2.734 1.037-6.452 2.163-8 2.438-1.465.26-3.06-.117-3.344-.188.16.08.38.321-.219 1.063-.865 1.07-5.916 2.818-8.75 3.687-2.82.866-6.207 1.157-10.344.22-3.753-.852-5.048-1.717-8.875-2.595v.157c3.428 1.237 4.987 2.632 8.375 3.53 1.632.434 3.367.584 5.094.563-.51.384-1.477 1.022-3.25 1.75-2.706 1.112-6.436 2.308-7.969
+2.625-.8.166-1.612.219-2.25.157v1.406c.227-.145.449-.273.719-.375 1.08-.41 2.171-.216 6-1.688 3.828-1.471 5.224-2.005 5.906-2.406.68-.4 1.612-.88 2.219-1.531 1.827-.138 3.57-.493 4.937-1 2.968-1.1 4.876-1.806 6.782-2.469 1.905-.663 2.354-1.415 3.406-1.781 1.091-.38 2.195-.166 6.062-1.531 3.868-1.366 5.283-1.827 5.969-2.22.701-.4 1.7-.932 2.313-1.593 1.97-.055 3.816-.385 5.28-.875 3.002-1.005 4.927-1.622 6.845-2.25 1.538-.504 2.174-1.047 2.906-1.437.23-.135.475-.254.75-.344 1.098-.36 2.181-.082 6.094-1.313 3.912-1.23 5.366-1.673 6.062-2.03.694-.358 1.63-.794 2.25-1.407 1.865-.023 3.636-.267 5.031-.688 3.03-.913 4.993-1.43 6.938-1.968 1.945-.54 2.426-1.265 3.5-1.563 1.114-.31 2.22.007 6.187-1.031 3.968-1.039 5.418-1.433 6.125-1.75.735-.33 1.814-.754 2.438-1.375 1.997.116 3.857-.02 5.344-.375 3.078-.735 5.083-1.101 7.062-1.5 1.588-.32 2.244-.79 3-1.094.238-.107.467-.193.75-.25 1.134-.23
+2.305.209 6.344-.5s5.5-.927 6.219-1.187c.715-.26 1.704-.568 2.343-1.094 1.925.24 3.748.224 5.188 0 3.126-.488 5.155-.7 7.156-.969 2.002-.268 2.489-.945 3.594-1.094 1.146-.154 2.276.302 6.344-.219 4.068-.52 5.56-.695 6.28-.937.738-.247 1.799-.586 2.438-1.125 2.05.335 3.974.398 5.5.219 3.143-.37 5.18-.56 7.188-.782 1.61-.178 2.265-.608 3.031-.843a3.43 3.43 0 0 1 .781-.188c1.15-.128 2.302.347 6.375-.125s5.56-.61 6.282-.844c.719-.232 1.7-.473 2.343-.968 1.937.333 3.77.404 5.22.25 3.145-.335 5.177-.519 7.187-.719 2.01-.2 2.484-.826 3.593-.938 1.152-.115 2.297.366 6.375-.062s5.59-.562 6.313-.781c.74-.224 1.796-.514 2.437-1.031 2.058.398 4.002.493 5.532.343 3.148-.308 5.175-.473 7.187-.656 1.614-.147 2.263-.56 3.031-.781.242-.081.494-.13.782-.156 1.152-.106 2.293.392 6.375 0 4.082-.393 5.589-.531 6.312-.75.721-.219 1.7-.448 2.344-.938 1.938.35 3.769.454 5.219.313 3.148-.309 5.175-.474
+7.187-.657 2.012-.183 2.514-.838 3.625-.937 1.152-.103 2.292.385 6.375 0s5.589-.501 6.313-.719c.739-.222 1.795-.514 2.437-1.031 2.057.402 4.003.503 5.531.344 3.147-.329 5.178-.523 7.188-.72 1.613-.156 2.266-.63 3.031-.874.24-.088.463-.122.75-.156 1.148-.14 2.317.34 6.375-.25 4.058-.59 5.562-.778 6.281-1.032.717-.253 1.675-.558 2.313-1.093 1.92.211 3.72.151 5.156-.094 3.12-.533 5.112-.929 7.094-1.313 1.982-.384 2.474-1.04 3.562-1.28 1.13-.252 2.27.115 6.25-.876s5.43-1.42 6.125-1.781c.723-.376 1.762-.87 2.375-1.531 1.963-.012 3.794-.291 5.22-.844 2.95-1.145 4.872-1.87 6.687-2.75 1.455-.707 2.334-1.686 2.547-1.984.212-.298.111-.746.137-.767.043-.035.32-.085.48-.429.858-1.847 2.32-5.644
+2.435-6.329.113-.682.163-1.348.214-1.745.03-.23-.147-.865-.125-.924.031-.082.305-.265.36-.515.267-1.198.09-2.191-.125-3.609-.214-1.417-.983-4.622-1.637-5.476-.659-.862-1.223-1.011-1.748-1-.208.27.137.262.163.312.68.05.934.369 1.42.897s1.442 3.94 1.579 5.39.19 2.86-.088 3.468c-.278.609-.944.429-1.237.495.531.186.89.213.953 1.057.058.814-.134 1.64-.52 2.806-.391 1.18-1.845 4.35-2.286 4.599-.452.255-.952.182-1.288.05z" enable-background="new" filter="url(#jg)"/>
+ <path d="m988.75-263.84c1.912 0.634 4.55 1.758 6.125 2.813 1.575 1.054 2.896 1.482 5.531 3.375 2.609 1.873 5.027 3.015 7.313 4.062 2.47 1.132 5.752 2.155 9.531 3.938-1.207-1.259-7.139-3.365-9.031-4.188s-4.128-1.93-6.938-3.781-3.622-2.482-6-3.719c-2.377-1.237-4.08-1.95-6.53-2.5z" enable-background="new" filter="url(#jf)"/>
+ <path d="M957.5-260.78c1.91.618 4.583 1.71 6.156 2.75 1.574 1.04 2.896 1.482 5.531 3.375 2.609 1.873 5.027 3.015 7.313 4.063 2.47 1.131 5.752 2.154 9.531 3.937-1.207-1.258-7.201-3.396-9.094-4.219-1.892-.823-4.096-1.93-6.906-3.781-2.81-1.85-3.593-2.44-5.969-3.656s-4.113-1.939-6.562-2.469z" enable-background="new" filter="url(#ib)"/>
+ <path d="M926.09-257.38c1.908.597 4.553 1.664 6.125 2.688 1.571 1.023 2.87 1.44 5.5 3.28 2.603 1.823 5.029 2.973 7.313 4 2.467 1.111 5.755 2.094 9.53 3.845-1.205-1.249-7.171-3.319-9.062-4.125s-4.102-1.891-6.906-3.688c-2.804-1.796-3.627-2.402-6-3.594-2.373-1.191-4.054-1.903-6.5-2.406z" enable-background="new" filter="url(#ia)"/>
+ <path d="M894.91-253.56c1.902.554 4.587 1.589 6.156 2.594s2.874 1.408 5.5 3.219c2.6 1.791 5 2.871 7.281 3.875 2.465 1.083 5.76 2.04 9.532 3.75-1.205-1.236-7.175-3.245-9.063-4.032-1.888-.786-4.075-1.83-6.875-3.593s-3.6-2.369-5.969-3.532c-2.37-1.163-4.123-1.834-6.562-2.28z" enable-background="new" filter="url(#hz)"/>
+ <path d="M863.72-248.66c1.88.43 4.504 1.38 6.063 2.313 1.558.932 2.852 1.257 5.468 3 2.59 1.724 4.981 2.708 7.25 3.625 2.452.99 5.74 1.877 9.5 3.5-1.201-1.208-7.152-3.067-9.03-3.782-1.88-.715-4.086-1.684-6.876-3.375s-3.585-2.228-5.937-3.28-4.026-1.713-6.438-2z" enable-background="new" filter="url(#hy)"/>
+ <path d="m833.16-241.38c1.848 0.296 4.47 0.976 6 1.781s2.814 1.056 5.375 2.531c2.535 1.46 4.89 2.326 7.125 3.063 2.414 0.797 5.657 1.467 9.375 2.844-1.188-1.129-7.088-2.59-8.938-3.156-1.85-0.567-4.003-1.374-6.75-2.844-2.746-1.47-3.5-1.92-5.812-2.781-2.311-0.861-4.005-1.32-6.375-1.438z" enable-background="new" filter="url(#hx)"/>
+ <path d="m802.91-232.31c1.822 0.211 4.366 0.8 5.875 1.531 1.51 0.73 2.756 0.93 5.281 2.281 2.5 1.338 4.832 2.049 7.031 2.657 2.377 0.656 5.565 1.073 9.22 2.187-1.168-1.045-6.93-2.103-8.75-2.562-1.822-0.46-3.953-1.127-6.657-2.438s-3.471-1.72-5.75-2.469-3.913-1.179-6.25-1.187z" enable-background="new" filter="url(#hw)"/>
+ <path d="M773.19-222.19c1.811.179 4.32.665 5.813 1.344 1.491.678 2.753.798 5.25 2.062 2.47 1.252 4.79 1.896 6.968 2.438 2.354.585 5.492.897 9.094 1.844-1.15-.992-6.852-1.784-8.656-2.188s-3.916-1.021-6.594-2.25c-2.678-1.229-3.403-1.61-5.656-2.281-2.253-.67-3.896-1.002-6.219-.969z" enable-background="new" filter="url(#hv)"/>
+ <path d="M743.56-211.19c1.793.13 4.273.55 5.75 1.188s2.716.741 5.188 1.937c2.446 1.184 4.72 1.747 6.874 2.219 2.328.51 5.42.68 9 1.562-1.143-.97-6.747-1.59-8.53-1.937-1.784-.347-3.884-.888-6.532-2.031-2.648-1.144-3.395-1.517-5.625-2.125-2.23-.61-3.826-.91-6.125-.813z" enable-background="new" filter="url(#hu)"/>
+ <g fill="#fff" filter="url(#ht)">
+ <path d="M744.94-212.12s7.222-3.223 9.063-3.5 3.352-.003 6 .563c2.647.565 8.735 2.215 11.188 3.374s5.312 3.563 5.312 3.563-7.146-2.78-10.188-3.563-7.645-2.083-10.375-2.312-11 1.875-11 1.875z"/>
+ <path d="m735.47-206.95s3.66-2.223 5.5-2.5 3.665 0.247 6.313 0.813 8.735 2.215 11.188 3.375 6.562 2.125 6.562 2.125-8.396-1.343-11.438-2.125-7.957-2.334-10.688-2.563-7.438 0.875-7.438 0.875zm24.38-10.66s8.544-3.299 10.398-3.458c1.854-0.16 3.642 0.48 6.248 1.212s8.577 2.766 10.95 4.08 6.414 2.537 6.414 2.537-8.294-1.873-11.279-2.848c-2.985-0.974-7.792-2.834-10.503-3.236s-12.228 1.713-12.228 1.713zm15.35-5.62s7.771-2.782 9.628-2.904c1.857-0.12 3.631 0.555 6.222 1.341 2.59 0.787 8.519 2.942 10.864 4.304 2.346 1.362 6.36 2.67 6.36 2.67s-8.253-2.045-11.217-3.08c-2.965-1.035-7.733-2.995-10.434-3.452-2.702-0.458-11.422 1.121-11.422 1.121zm14.44-4.72s8.683-3.52 10.542-3.605 3.62 0.624 6.195 1.46c2.575 0.837 8.46 3.107 10.779 4.514 2.318 1.408 6.307 2.793 6.307 2.793s-8.212-2.204-11.156-3.297-7.673-3.144-10.365-3.654-12.3 1.789-12.3 1.789zm14.86-5.38s7.808-2.583 9.666-2.668c1.86-0.085 3.62
+0.625 6.195 1.461 2.575 0.837 8.46 3.107 10.78 4.514 2.318 1.407 6.307 2.792 6.307 2.792s-8.213-2.204-11.156-3.296-7.673-3.144-10.365-3.654-11.426 0.85-11.426 0.85zm15.06-4.25s8.558-2.583 10.417-2.668 3.62 0.625 6.195 1.461c2.575 0.837 8.46 3.107 10.779 4.514 2.318 1.407 6.307 2.792 6.307 2.792s-8.212-2.204-11.156-3.296-7.673-3.144-10.365-3.654-12.176 0.85-12.176 0.85zm16.67-5.02s6.967-1.987 8.828-1.968c1.86 0.02 3.579 0.827 6.102 1.807 2.524 0.98 8.272 3.578 10.508 5.113 2.236 1.536 6.14 3.143 6.14 3.143s-8.075-2.662-10.952-3.919c-2.878-1.256-7.484-3.57-10.143-4.231-2.66-0.66-10.482 0.055-10.482 0.055zm14.5-3.4s7.688-2.028 9.548-1.968 3.56 0.902 6.063 1.936c2.502 1.033 8.194 3.752 10.397 5.335 2.203 1.582 6.072 3.272 6.072 3.272s-8.017-2.833-10.868-4.15c-2.85-1.318-7.407-3.73-10.05-4.446s-11.162 0.021-11.162 0.021zm14.09-3.21s8.17-1.97 10.027-1.854c1.857 0.115 3.532 1.01 6.002
+2.118s8.077 3.997 10.23 5.645 5.972 3.454 5.972 3.454-7.928-3.074-10.738-4.476-7.291-3.95-9.913-4.746c-2.621-0.796-11.58-0.141-11.58-0.141zm16.56-2.39s8.085-1.908 9.938-1.737c1.853 0.172 3.5 1.117 5.935 2.3 2.436 1.182 7.952 4.24 10.055 5.953s5.864 3.633 5.864 3.633-7.832-3.312-10.597-4.8-7.168-4.169-9.764-5.044c-2.597-0.876-11.431-0.305-11.431-0.305zm15.2-2.75s7.642-1.428 9.495-1.265c1.854 0.162 3.505 1.1 5.946 2.27s7.973 4.203 10.084 5.905c2.112 1.703 5.881 3.605 5.881 3.605s-7.847-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.788-4.998-2.6-0.863-10.998-0.77-10.998-0.77zm14.87-1.64s8.642-1.553 10.495-1.39c1.854 0.162 3.505 1.1 5.946 2.27s7.972 4.203 10.084 5.905c2.111 1.703 5.88 3.605 5.88 3.605s-7.846-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.787-4.998-2.601-0.863-11.998-0.644-11.998-0.644zm16.25-2.31s7.642-0.865 9.495-0.703c1.854 0.163 3.505 1.1 5.946 2.27s7.973 4.203 10.084
+5.906c2.112 1.702 5.881 3.605 5.881 3.605s-7.847-3.275-10.62-4.749c-2.772-1.474-7.187-4.135-9.788-4.998-2.6-0.862-10.998-1.331-10.998-1.331zm15.13-1.19s8.58-1.49 10.433-1.328c1.854 0.163 3.505 1.1 5.946 2.27s7.972 4.203 10.084 5.906c2.111 1.702 5.88 3.605 5.88 3.605s-7.846-3.275-10.62-4.749c-2.772-1.474-7.187-4.135-9.787-4.998-2.601-0.862-11.935-0.706-11.935-0.706zm16.25-2.06s7.83-0.803 9.683-0.64c1.854 0.162 3.505 1.1 5.946 2.27s7.972 4.203 10.084 5.905c2.111 1.703 5.88 3.605 5.88 3.605s-7.846-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.787-4.998-2.601-0.863-11.185-1.394-11.185-1.394zm15.37-1.25s8.392-1.178 10.245-1.015c1.854 0.162 3.505 1.1 5.946 2.27s7.972 4.203 10.084 5.905c2.111 1.703 5.88 3.605 5.88 3.605s-7.847-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.788-4.998-2.6-0.863-11.748-1.02-11.748-1.02zm16.19-2.06s6.892-0.99 8.745-0.828c1.854 0.163 3.505 1.1 5.946 2.27s7.973 4.203
+10.084 5.906c2.112 1.702 5.881 3.605 5.881 3.605s-7.847-3.275-10.62-4.749-7.188-4.135-9.788-4.998c-2.6-0.862-10.248-1.206-10.248-1.206zm17.16-0.94s6.83-1.178 8.683-1.015c1.854 0.162 3.505 1.1 5.946 2.27 2.44 1.171 7.972 4.203 10.084 5.905 2.111 1.703 5.88 3.605 5.88 3.605s-7.847-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.788-4.998-2.6-0.863-10.185-1.02-10.185-1.02zm16.1-2s6.08-0.428 7.933-0.265c1.854 0.162 3.505 1.1 5.946 2.27 2.44 1.171 7.972 4.203 10.084 5.905 2.111 1.703 5.88 3.605 5.88 3.605s-7.847-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.788-4.998-2.6-0.863-9.435-1.77-9.435-1.77zm15.8-1.37s6.454-0.678 8.308-0.515c1.854 0.162 3.505 1.1 5.946 2.27 2.44 1.171 7.972 4.203 10.084 5.905 2.111 1.703 5.88 3.605 5.88 3.605s-7.847-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.788-4.998-2.6-0.863-9.81-1.52-9.81-1.52zm15.6-1.86s5.498-0.91 7.358-0.853c1.86 0.056 3.562 0.896 6.066 1.925
+2.504 1.03 8.2 3.739 10.406 5.318 2.205 1.578 6.078 3.261 6.078 3.261s-8.022-2.819-10.875-4.131c-2.853-1.313-7.413-3.716-10.06-4.429-2.645-0.712-8.973-1.091-8.973-1.091zm17.4-2.46s4.547-1.156 6.408-1.186c1.86-0.03 3.6 0.73 6.149 1.642 2.55 0.912 8.365 3.354 10.64 4.829 2.277 1.474 6.224 2.976 6.224 2.976s-8.145-2.444-11.055-3.623c-2.91-1.178-7.578-3.368-10.253-3.957-2.676-0.588-8.113-0.68-8.113-0.68zm14.5-3.03s5.96-1.774 7.82-1.83c1.86-0.057 3.61 0.68 6.172 1.555 2.562 0.876 2.522 0.857 5.333 1.49 2.797 0.63 7.077 1.513 7.077 1.513s-3.616-0.016-6.792-0.466c-3.116-0.441-7.375-1.698-10.058-2.249-2.684-0.55-9.552-0.013-9.552-0.013z" enable-background="new"/>
+ <path d="M1099.2-279.93c.161.269 11.208-4.6 12.188-4.688.98-.087 2 3.125 2 3.125s-.775-1.504-2.875-1.062-11.301 2.671-11.312 2.625z"/>
+ </g>
+ <path d="M1107.5-284.09c-.419.213-.156.094-.647.306-.486.21-1.724.574-4.08 1.459-3.33 1.25-5.83 2.153-7.026 3.066-1.536.021-3.72.233-5.656.719a227.709 227.709 0 0 1-6.75 1.593c-1.895.42-1.676.643-2.875.875-1.297.252-1.721-.009-5.438.782-3.49.742-8.894 1.93-10.156 2.687-1.583-.18-3.867-.322-5.843-.031-3.04.447-4.917.673-6.844.906-.655.08-1.041.201-1.344.282-.426.131-.686.26-1.375.343-1.311.16-1.762-.157-5.531.282-3.554.413-9.005 1.272-10.25 1.937-1.599-.297-3.858-.534-5.844-.344-3.059.294-4.972.484-6.906.657-1.934.172-1.689.422-2.906.53-1.317.118-1.76-.163-5.532.25-3.541.39-9.007 1.21-10.28 1.876-1.6-.295-3.888-.507-5.876-.313-3.058.3-4.94.48-6.875.657-.657.06-1.04.178-1.343.25-.428.118-.684.218-1.375.28-1.316.121-1.76-.194-5.532.22-3.556.39-9.005 1.239-10.25
+1.906-1.598-.294-3.86-.524-5.843-.313-3.056.326-4.974.526-6.907.719-1.932.192-1.69.44-2.906.562-1.315.132-1.763-.164-5.53.282-3.54.418-8.979 1.292-10.25 1.969-1.599-.282-3.86-.42-5.845-.188-3.052.358-4.945.568-6.875.781-.656.073-1.04.173-1.344.25-.426.127-.684.267-1.375.344-1.313.146-1.767-.174-5.53.313-3.55.458-8.98 1.419-10.22 2.125-1.593-.245-3.834-.382-5.812-.125-3.048.394-4.95.648-6.875.906-1.925.258-1.726.493-2.938.656-1.31.176-1.747-.104-5.5.469-3.524.538-8.923 1.699-10.188 2.437-1.587-.203-3.845-.254-5.812.094-3.026.536-4.9.862-6.813 1.187-.65.111-1.013.271-1.312.375-.42.165-.664.332-1.344.47-1.295.26-1.727-.007-5.438.812-3.498.772-8.846 2.383-10.062 3.219-1.562-.078-3.757.085-5.687.593-2.972.783-4.818 1.232-6.688 1.75s-1.666.768-2.843 1.094c-1.273.353-1.697.107-5.344 1.188-3.425 1.014-8.65 2.933-9.875 3.843-1.539.013-3.72.273-5.625.875-2.931.928-4.75 1.459-6.594
+2.063-.627.205-.992.392-1.281.531-.408.214-.653.409-1.313.625-1.254.412-1.686.19-5.28 1.438-3.39 1.177-8.596 3.213-9.782 4.156-1.524.06-3.65.395-5.531 1.062-2.898 1.029-4.7 1.676-6.531 2.313-1.833.637-1.628.848-2.782 1.25-1.246.434-1.663.2-5.218 1.562-3.34 1.28-8.488 3.483-9.688 4.47-1.507.107-3.636.498-5.5 1.218a1044.752 1044.752 0 0 1-6.437 2.469c-.617.233-.997.442-1.282.593v1.094c.112-.222.386-.817.907-1.094.698-.37 4.813-1.993 6.812-2.718 1.657-.602 4.154-1.329 5.969-1.313.302.003.588.051.844.094 1.842.308 7.468 1.562 7.468 1.562s-6.233-1.646-7.03-1.843c-.191-.048-.536-.07-.97-.063 1.146-.87 4.762-2.393 7.344-3.437 2.839-1.148 3.117-1.252 5.063-1.657 2.008-.417 3.156-.5 3.156-.5s-.082-.6.969-1.125c.705-.351 4.887-1.892 6.906-2.562 1.952-.648 5.057-1.359 6.875-1 1.863.367 7.531 1.812 7.531 1.812s-6.287-1.87-7.094-2.093c-.193-.054-.53-.086-.968-.094 1.158-.833 4.794-2.195 7.406-3.156
+2.87-1.056 3.167-1.162 5.125-1.532 1.853-.35 2.859-.425 3.031-.437.114-.217.377-.81.906-1.063.71-.338 4.926-1.712 6.97-2.312 1.692-.497 4.24-1.037 6.093-.906.308.021.613.097.875.156 1.881.424 7.594 2.031 7.594 2.031s-6.342-2.065-7.157-2.312c-.194-.06-.557-.104-1-.125 1.17-.798 4.863-2.057 7.5-2.938 2.898-.968 3.233-1.003 5.22-1.281 2.049-.287 3.187-.313 3.187-.313s-.073-.607 1-1.062c.72-.306 4.99-1.5 7.062-2 2.003-.483 5.199-.928 7.063-.406 1.91.535 7.719 2.5 7.719 2.5s-6.423-2.424-7.25-2.72c-.198-.07-.583-.14-1.032-.187 1.188-.728 4.916-1.774 7.594-2.5 2.944-.797 3.292-.77 5.313-.906 1.913-.128 2.947-.07 3.125-.062.117-.204.391-.78.937-.97.732-.253 5.079-1.047 7.188-1.374 1.748-.271 4.4-.485 6.312-.094.318.065.605.186.875.281 1.94.69 7.844 3.094 7.844 3.094s-6.535-2.95-7.375-3.312c-.201-.087-.575-.167-1.031-.25 1.206-.633 5.03-1.396 7.75-1.906 2.99-.562 3.3-.53 5.344-.532 2.109-.002
+3.312.125 3.312.125s-.073-.63 1.031-.937c.74-.206 5.126-.834 7.25-1.063 2.053-.22 5.319-.252 7.22.47 1.947.738 7.843 3.374 7.843 3.374s-6.563-3.179-7.406-3.562c-.202-.092-.543-.187-1-.282 1.21-.602 4.984-1.248 7.718-1.656 3.005-.448 3.326-.452 5.375-.406 1.94.043 3.007.194 3.188.219.119-.194.384-.766.937-.907.743-.188 5.155-.734 7.282-.937 1.763-.169 4.42-.234 6.343.25.32.08.604.203.875.312 1.953.784 7.907 3.47 7.907 3.47s-6.592-3.254-7.438-3.657c-.202-.096-.572-.207-1.031-.313 1.214-.574 5.044-1.122 7.781-1.5 3.009-.415 3.323-.442 5.375-.375 2.118.07 3.313.25 3.313.25s-.078-.637 1.03-.906c.745-.18 5.153-.663 7.282-.844 2.059-.174 5.343-.124 7.25.657 1.955.8 7.875 3.53 7.875 3.53s-6.56-3.308-7.406-3.718c-.202-.098-.572-.203-1.031-.312 1.215-.564 5.01-1.115 7.75-1.47 3.01-.389 3.321-.397 5.375-.312 1.944.08 3.006.254 3.187.282.12-.191.383-.746.938-.875.744-.174 5.15-.65 7.28-.813
+1.767-.134 4.45-.126 6.376.375.32.083.603.201.875.313 1.954.8 7.906 3.562 7.906 3.562s-6.591-3.34-7.437-3.75c-.203-.098-.572-.203-1.032-.312 1.215-.564 5.042-1.084 7.782-1.438 3.01-.39 3.352-.429 5.406-.344 2.12.088 3.312.313 3.312.313s-.078-.65 1.032-.906c.744-.173 5.15-.624 7.28-.782 2.061-.152 5.344-.096 7.25.688 1.956.804 7.876 3.5 7.876 3.5s-6.56-3.276-7.406-3.688c-.203-.098-.572-.202-1.032-.312 1.216-.562 5.012-1.128 7.75-1.5 3.01-.41 3.323-.416 5.375-.344 1.943.068 3.008.165 3.188.188.119-.195.384-.73.937-.875.742-.197 5.131-.83 7.25-1.094 1.757-.22 4.406-.333 6.313.031.317.06.606.19.875.281 1.936.661 7.844 2.938 7.844 2.938s-6.537-2.807-7.375-3.156c-.2-.084-.577-.174-1.032-.25 1.204-.651 5.02-1.372 7.72-2 2.966-.69 3.288-.756 5.312-.875 2.088-.124 3.28-.032 3.28-.032s-.086-.632 1-1.03c.73-.269 5.048-1.339 7.126-1.813 2.008-.46 5.168-1.03 7-.625 1.878.414 13.578 3.015 13.578
+3.015s-12.328-3.022-13.141-3.265c-.195-.058-.559-.107-1-.125 1.167-.804 3.514-1.688 6.11-2.703 1.68-.659.923-.377 2.775-1.004 1.754-.594 2.486-1.01 2.63-1.113.347-.207-.355-.122-.544-.042z" enable-background="new" filter="url(#hs)" opacity=".25"/>
+ <path d="m1082.6-275.12c1.873 0.393 4.496 1.146 6.031 1.969s2.822 1.056 5.375 2.5c2.527 1.43 4.796 2.007 6.969 2.531 2.348 0.566 5.435 0.715 8.844 1.188-1.09-0.84-6.608-1.173-8.406-1.563-1.8-0.39-3.895-1.016-6.594-2.313-2.7-1.296-3.495-1.799-5.813-2.687-2.318-0.889-4.004-1.383-6.406-1.625z" enable-background="new" filter="url(#hr)" opacity=".25"/>
+ <path d="M1051.5-270c1.905.578 4.528 1.616 6.094 2.594 1.565.978 2.88 1.36 5.5 3.125 2.593 1.747 4.986 2.71 7.25 3.594 2.446.955 5.682 1.657 9.406 3.062-1.19-1.138-7.063-2.687-8.938-3.375-1.874-.688-4.081-1.566-6.874-3.281-2.794-1.715-3.574-2.284-5.938-3.406-2.364-1.123-4.057-1.835-6.5-2.313z" enable-background="new" filter="url(#hq)" opacity=".25"/>
+ <path d="m1020.2-266.84c1.912 0.638 4.581 1.755 6.156 2.813 1.575 1.057 2.896 1.508 5.531 3.406 2.61 1.878 5.029 3.03 7.313 4.062 2.468 1.116 5.764 2.174 9.531 3.844-1.203-1.222-7.203-3.314-9.094-4.125-1.89-0.81-4.064-1.894-6.874-3.75s-3.622-2.477-6-3.719c-2.379-1.242-4.111-1.975-6.563-2.531z" enable-background="new" filter="url(#hp)" opacity=".25"/>
+ <path d="M1110.2-266.89c.15.049.688.631.11 1.484-.81 1.195-5.705 3.325-8.563 4.125-2.845.798-6.29.978-10.562-.375-4.302-1.362-5.47-2.468-10.656-4.312 4.664 2.115 6.195 3.952 10.125 5.344 1.62.574 3.367.94 5.062 1.03-.445.327-1.53.984-3.562 1.595-2.796.84-6.65 1.534-8.25 1.625-1.515.086-3.142-.513-3.438-.625.167.103.374.377-.25 1.03-.899.945-6.147 1.924-9.125 2.25-2.964.326-6.521-.015-10.906-1.905-3.978-1.715-5.339-2.916-9.406-4.75v.156c3.643 2.095 5.284 3.883 8.875 5.562 1.73.81 3.592 1.41 5.406 1.72-.534.286-1.557.71-3.437 1.03-2.87.488-6.81.817-8.438.75-.85-.034-1.728-.184-2.406-.406-.685-.215-1.19-.444-1.312-.5.169.107.43.403-.22 1.031-.909.88-6.245 1.337-9.25 1.47-2.99.131-6.588-.451-11-2.563-4.44-2.127-5.64-3.402-10.905-5.782 4.734 2.597 6.286 4.63 10.344 6.72 1.673.861 3.485 1.493 5.25 1.937-.463.233-1.59.688-3.688.937-2.886.343-6.834.493-8.468.375-1.547-.111-3.232-.857-3.532-1
+.17.12.414.41-.218 1-.913.851-6.244 1.262-9.25 1.375-2.993.113-6.59-.49-11-2.594-4.002-1.908-5.388-3.137-9.47-5.093v.156c3.656 2.204 5.295 4.053 8.907 5.906 1.74.893 3.637 1.528 5.469 1.969-.54.248-1.578.615-3.469.844-2.886.348-6.866.52-8.5.406a9.446 9.446 0 0 1-2.406-.5 12.532 12.532 0 0 1-1.313-.531c.17.112.465.422-.187 1.03-.913.853-6.275 1.294-9.281 1.407-2.993.112-6.594-.528-11-2.594-4.437-2.08-5.647-3.331-10.906-5.656 4.729 2.548 6.29 4.578 10.344 6.625 1.671.844 3.485 1.467 5.25 1.906-.464.235-1.59.684-3.688.938-2.886.348-6.836.57-8.469.469-1.544-.096-3.2-.83-3.5-.97.17.12.382.405-.25 1-.912.861-6.246 1.331-9.25 1.47-2.99.138-6.567-.451-10.969-2.47-3.993-1.83-5.365-3.028-9.437-4.905v.156c3.647 2.133 5.27 3.935 8.875 5.719 1.737.86 3.607 1.45 5.437 1.875-.54.253-1.55.64-3.437.906-2.88.404-6.838.646-8.469.562a9.36 9.36 0 0 1-2.406-.437 12.971 12.971 0 0
+1-1.313-.5c.17.109.432.41-.218 1.031-.911.87-6.25 1.392-9.25 1.563-2.987.17-6.574-.316-10.97-2.282-4.424-1.978-5.605-3.228-10.843-5.375 4.71 2.388 6.27 4.39 10.312 6.344a23.73 23.73 0 0 0 5.218 1.781c-.461.25-1.597.713-3.687 1.032-2.876.438-6.78.733-8.406.687-1.539-.043-3.233-.745-3.532-.875.169.113.411.414-.218 1.031-.908.891-6.203 1.529-9.188 1.813-2.971.283-6.573-.176-10.938-1.938-3.96-1.598-5.329-2.795-9.344-4.312v.156c3.596 1.811 5.239 3.582 8.813 5.156 1.722.759 3.587 1.29 5.406 1.625-.536.28-1.566.688-3.437 1.063-2.856.572-6.79 1.02-8.407 1.031-.844.006-1.706-.08-2.375-.25-.676-.162-1.16-.33-1.28-.375.166.094.422.383-.22 1.062-.897.951-6.186 1.918-9.125 2.438-2.925.518-6.432.374-10.719-1.031-4.315-1.415-5.472-2.53-10.562-3.969 4.577 1.751 6.09 3.56 10.031 5 1.627.594 3.37.956 5.094 1.156-.453.297-1.555.884-3.594 1.469-2.804.805-6.638 1.576-8.218
+1.75-1.495.165-3.117-.317-3.407-.406.164.09.393.36-.218 1.062-.883 1.014-6.045 2.372-8.938 3.063-2.88.687-6.335.76-10.562-.438-3.835-1.086-5.172-2.072-9.062-3.125v.156c3.484 1.395 5.07 2.92 8.53 4.032 1.669.535 3.457.786 5.22.875-.52.352-1.5.914-3.313 1.53-2.765.942-6.59 1.936-8.156 2.157-.818.115-1.633.123-2.281.031-.655-.083-1.133-.218-1.25-.25.162.075.434.34-.188 1.094-.87 1.055-6.01 2.66-8.875 3.438-2.852.774-6.259.958-10.438-.094-4.206-1.06-5.356-2.042-10.344-3.156 4.485 1.46 5.97 3.135 9.813 4.25 1.585.46 3.287.638 4.969.687-.442.337-1.513 1.028-3.5 1.781-2.734 1.037-6.452 2.163-8 2.438-1.465.26-3.06-.117-3.344-.188.16.08.38.321-.219 1.063-.865 1.07-5.916 2.818-8.75 3.687-2.82.866-6.207 1.157-10.344.22-3.753-.852-5.048-1.717-8.875-2.595v.157c3.428 1.237 4.987 2.632 8.375 3.53 1.632.434 3.367.584 5.094.563-.51.384-1.477 1.022-3.25 1.75-2.706 1.112-6.436 2.308-7.969
+2.625-.8.166-1.612.219-2.25.157v1.406c.227-.145.449-.273.719-.375 1.08-.41 2.171-.216 6-1.688 3.828-1.471 5.224-2.005 5.906-2.406.68-.4 1.612-.88 2.219-1.531 1.827-.138 3.57-.493 4.937-1 2.968-1.1 4.876-1.806 6.782-2.469 1.905-.663 2.354-1.415 3.406-1.781 1.091-.38 2.195-.166 6.062-1.531 3.868-1.366 5.283-1.827 5.969-2.22.701-.4 1.7-.932 2.313-1.593 1.97-.055 3.816-.385 5.28-.875 3.002-1.005 4.927-1.622 6.845-2.25 1.538-.504 2.174-1.047 2.906-1.437.23-.135.475-.254.75-.344 1.098-.36 2.181-.082 6.094-1.313 3.912-1.23 5.366-1.673 6.062-2.03.694-.358 1.63-.794 2.25-1.407 1.865-.023 3.636-.267 5.031-.688 3.03-.913 4.993-1.43 6.938-1.968 1.945-.54 2.426-1.265 3.5-1.563 1.114-.31 2.22.007 6.187-1.031 3.968-1.039 5.418-1.433 6.125-1.75.735-.33 1.814-.754 2.438-1.375 1.997.116 3.857-.02 5.344-.375 3.078-.735 5.083-1.101 7.062-1.5 1.588-.32 2.244-.79 3-1.094.238-.107.467-.193.75-.25 1.134-.23
+2.305.209 6.344-.5s5.5-.927 6.219-1.187c.715-.26 1.704-.568 2.343-1.094 1.925.24 3.748.224 5.188 0 3.126-.488 5.155-.7 7.156-.969 2.002-.268 2.489-.945 3.594-1.094 1.146-.154 2.276.302 6.344-.219 4.068-.52 5.56-.695 6.28-.937.738-.247 1.799-.586 2.438-1.125 2.05.335 3.974.398 5.5.219 3.143-.37 5.18-.56 7.188-.782 1.61-.178 2.265-.608 3.031-.843a3.43 3.43 0 0 1 .781-.188c1.15-.128 2.302.347 6.375-.125s5.56-.61 6.282-.844c.719-.232 1.7-.473 2.343-.968 1.937.333 3.77.404 5.22.25 3.145-.335 5.177-.519 7.187-.719 2.01-.2 2.484-.826 3.593-.938 1.152-.115 2.297.366 6.375-.062s5.59-.562 6.313-.781c.74-.224 1.796-.514 2.437-1.031 2.058.398 4.002.493 5.532.343 3.148-.308 5.175-.473 7.187-.656 1.614-.147 2.263-.56 3.031-.781.242-.081.494-.13.782-.156 1.152-.106 2.293.392 6.375 0 4.082-.393 5.589-.531 6.312-.75.721-.219 1.7-.448 2.344-.938 1.938.35 3.769.454 5.219.313 3.148-.309 5.175-.474
+7.187-.657 2.012-.183 2.514-.838 3.625-.937 1.152-.103 2.292.385 6.375 0s5.589-.501 6.313-.719c.739-.222 1.795-.514 2.437-1.031 2.057.402 4.003.503 5.531.344 3.147-.329 5.178-.523 7.188-.72 1.613-.156 2.266-.63 3.031-.874.24-.088.463-.122.75-.156 1.148-.14 2.317.34 6.375-.25 4.058-.59 5.562-.778 6.281-1.032.717-.253 1.675-.558 2.313-1.093 1.92.211 3.72.151 5.156-.094 3.12-.533 5.112-.929 7.094-1.313 1.982-.384 2.474-1.04 3.562-1.28 1.13-.252 2.27.115 6.25-.876s5.43-1.42 6.125-1.781c.723-.376 1.762-.87 2.375-1.531 1.963-.012 3.794-.291 5.22-.844 2.95-1.145 4.872-1.87 6.687-2.75 1.455-.707 2.334-1.686 2.547-1.984.212-.298.111-.746.137-.767.043-.035.32-.085.48-.429.858-1.847 2.32-5.644
+2.435-6.329.113-.682.163-1.348.214-1.745.03-.23-.147-.865-.125-.924.031-.082.305-.265.36-.515.267-1.198.09-2.191-.125-3.609-.214-1.417-.983-4.622-1.637-5.476-.659-.862-1.223-1.011-1.748-1-.208.27.137.262.163.312.68.05.934.369 1.42.897s1.221 3.85 1.358 5.301.19 2.86-.088 3.469c-.278.608-.723.517-1.016.583.531.186.67.125.732.969.058.813-.134 1.64-.52 2.806-.392 1.18-1.846 4.35-2.286 4.598-.452.256-.731.27-1.067.14z" enable-background="new" filter="url(#ho)" opacity=".25"/>
+ <path d="m988.75-263.84c1.912 0.634 4.55 1.758 6.125 2.813 1.575 1.054 2.896 1.482 5.531 3.375 2.609 1.873 5.027 3.015 7.313 4.062 2.47 1.132 5.752 2.155 9.531 3.938-1.207-1.259-7.139-3.365-9.031-4.188s-4.128-1.93-6.938-3.781-3.622-2.482-6-3.719c-2.377-1.237-4.08-1.95-6.53-2.5z" enable-background="new" filter="url(#hn)" opacity=".25"/>
+ <path d="M957.5-260.78c1.91.618 4.583 1.71 6.156 2.75 1.574 1.04 2.896 1.482 5.531 3.375 2.609 1.873 5.027 3.015 7.313 4.063 2.47 1.131 5.752 2.154 9.531 3.937-1.207-1.258-7.201-3.396-9.094-4.219-1.892-.823-4.096-1.93-6.906-3.781-2.81-1.85-3.593-2.44-5.969-3.656s-4.113-1.939-6.562-2.469z" enable-background="new" filter="url(#hm)" opacity=".25"/>
+ <path d="M926.09-257.38c1.908.597 4.553 1.664 6.125 2.688 1.571 1.023 2.87 1.44 5.5 3.28 2.603 1.823 5.029 2.973 7.313 4 2.467 1.111 5.755 2.094 9.53 3.845-1.205-1.249-7.171-3.319-9.062-4.125s-4.102-1.891-6.906-3.688c-2.804-1.796-3.627-2.402-6-3.594-2.373-1.191-4.054-1.903-6.5-2.406z" enable-background="new" filter="url(#hl)" opacity=".25"/>
+ <path d="M894.91-253.56c1.902.554 4.587 1.589 6.156 2.594s2.874 1.408 5.5 3.219c2.6 1.791 5 2.871 7.281 3.875 2.465 1.083 5.76 2.04 9.532 3.75-1.205-1.236-7.175-3.245-9.063-4.032-1.888-.786-4.075-1.83-6.875-3.593s-3.6-2.369-5.969-3.532c-2.37-1.163-4.123-1.834-6.562-2.28z" enable-background="new" filter="url(#hk)" opacity=".25"/>
+ <path d="M863.72-248.66c1.88.43 4.504 1.38 6.063 2.313 1.558.932 2.852 1.257 5.468 3 2.59 1.724 4.981 2.708 7.25 3.625 2.452.99 5.74 1.877 9.5 3.5-1.201-1.208-7.152-3.067-9.03-3.782-1.88-.715-4.086-1.684-6.876-3.375s-3.585-2.228-5.937-3.28-4.026-1.713-6.438-2z" enable-background="new" filter="url(#hj)" opacity=".25"/>
+ <path d="m833.16-241.38c1.848 0.296 4.47 0.976 6 1.781s2.814 1.056 5.375 2.531c2.535 1.46 4.89 2.326 7.125 3.063 2.414 0.797 5.657 1.467 9.375 2.844-1.188-1.129-7.088-2.59-8.938-3.156-1.85-0.567-4.003-1.374-6.75-2.844-2.746-1.47-3.5-1.92-5.812-2.781-2.311-0.861-4.005-1.32-6.375-1.438z" enable-background="new" filter="url(#hi)" opacity=".25"/>
+ <path d="m802.91-232.31c1.822 0.211 4.366 0.8 5.875 1.531 1.51 0.73 2.756 0.93 5.281 2.281 2.5 1.338 4.832 2.049 7.031 2.657 2.377 0.656 5.565 1.073 9.22 2.187-1.168-1.045-6.93-2.103-8.75-2.562-1.822-0.46-3.953-1.127-6.657-2.438s-3.471-1.72-5.75-2.469-3.913-1.179-6.25-1.187z" enable-background="new" filter="url(#hh)" opacity=".25"/>
+ <path d="M773.19-222.19c1.811.179 4.32.665 5.813 1.344 1.491.678 2.753.798 5.25 2.062 2.47 1.252 4.79 1.896 6.968 2.438 2.354.585 5.492.897 9.094 1.844-1.15-.992-6.852-1.784-8.656-2.188s-3.916-1.021-6.594-2.25c-2.678-1.229-3.403-1.61-5.656-2.281-2.253-.67-3.896-1.002-6.219-.969z" enable-background="new" filter="url(#hg)" opacity=".25"/>
+ <path d="M743.56-211.19c1.793.13 4.273.55 5.75 1.188s2.716.741 5.188 1.937c2.446 1.184 4.72 1.747 6.874 2.219 2.328.51 5.42.68 9 1.562-1.143-.97-6.747-1.59-8.53-1.937-1.784-.347-3.884-.888-6.532-2.031-2.648-1.144-3.395-1.517-5.625-2.125-2.23-.61-3.826-.91-6.125-.813z" enable-background="new" filter="url(#hf)" opacity=".25"/>
+ </g>
+ </g>
+ <path d="M912.45 671.2c1.642-3.218 3.518-5.735 4.861-9.849.8-3.658 3.312-2.03 7.26-8.397 1.403-2.24 5.477.391 8.966-2.399 1.27-.803 2.885-.404 4.483-.063 3.765 1.319 5.825 3.704 8.333 5.808 6.14 5.97 20.534 7.944 23.486 6.314 1.434-2.905 7.882-5.41 12.374-11.112.749-1.123 11.73-8.745 14.647-6.566" enable-background="new" fill="none" stroke="#000"/>
+ <path d="M937.07 660.78c7.363-3.233 13.811-8.908 20.708-13.385 3.31-1.97 6.87 3.216 10.796 3.599 2.298-.218 3.713 1.202 5.682 1.641 5.157 1.318 2.398 3.865 9.975 6.44 6.156 1.72 8.908-6.799 14.9-7.324 4.878-.503 8.1-.316 11.617-.252 3.927.139 4.079-3.498 6.061-5.304 2.98-2.805 7.156-1.85 10.145-4.74 1.018-1.385 1.955-3.011 2.735-5.109.882-2 3.04.306 4.798 1.263" enable-background="new" fill="none" stroke="#000"/>
+ <g fill-rule="evenodd">
+ <path transform="translate(48.571 195.53)" d="m403.28 1056.3l56.569-42.426 72.125 14.142-46.669 52.326-53.74 7.071-28.284-31.113z" enable-background="accumulate" filter="url(#he)" opacity=".25"/>
+ <path d="m590.84 1256.1c-1.407 18.801-1.145 32.751 2.082 49.303 3.226 16.552 16.406 45.907 20.334 63.184 3.926 17.267 2.694 38.31-12.46 51.148-15.317 12.977-42.05 21.599-67.831 15.734s-69.55-49.223-88.59-70.228c-19.112-21.083-63.761-93.851-77.94-124.28-14.177-30.425-12.66-36.719-8.119-45.53-9.367-24.52-12.414-50.067-33.712-75.577 30.325 3.114 43.88 26.956 60.126 47.14-5.53-48.076-18.055-64.416-28.374-90.724 29.994 6.082 50.579 31.872 63.98 72.712 9.554-3.918 18.238-9.373 30.187-9.061-11.298-41.696-17.949-69.916-36.687-101.07 53.442 5.67 83.657 80.639 78.971 87.96 9.978-2.243 19.006-6.53 30.437-5.65-11.249-38.348-21.048-76.869-3.66-118.65 0 0 48.287 65.436 54.39 85.805 6.103 20.37 1.52 38.701 1.52 38.701s16.96 31.085 20.293 51.094c3.373 20.241-3.533 59.103-4.946 77.983z" enable-background="new" fill="#ada469"/>
+ <path transform="matrix(-.90453 .25066 .25066 .90453 1043.9 219.06)" d="M719.5 738.7l18.312 15.432 44.411-15.388L805.5 713.2l11.464 19.221 30.672 12.784 25.097 5.728L892 723.2l16.023 23.826L947 752.2l10.245-6.198L964 754.7l25.5 11 2-40.5-35.551-14.538-32.493-21.527-40.452-11.466-21.307-15.533L840 685.2l-84.971-46.583-33.03 38.083-2.5 62z" clip-path="url(#e)" enable-background="accumulate" fill="#fff" filter="url(#o)"/>
+ <path transform="matrix(-.90453 .25066 .25066 .90453 870.86 206.47)" d="M584 696.5l-6.563 17.156s-7.811 20.365-15.688 43.656c-3.938 11.646-7.883 24.041-10.938 35.125s-5.335 20.38-5.5 28.281c-.398 19.162 5.747 34.888 8.938 41.75-.772 3.555-1.991 9.454-3.344 18.094-1.92 12.268-3.718 27.154-2.375 39.875 1.382 13.088 6.812 28.188 12.594 43.031s12.054 29.227 15.22 38.031c6.631 18.452 9.992 31.576 11.311 48.5.582 7.456-.242 20.336-1.25 33.375s-2.186 26.301-1.687 36.969c.989 21.14 9.328 46.835 33.375 57.937 22.775 10.515 55.327 11.702 83.438-3.437 16.16-8.704 30.076-27.098 43.375-46.906s24.969-41.053 31.938-54.906c15.353-30.521 39.394-115.46 45.625-152.72 3.018-18.047 3.921-29.066 2.625-38.031-.979-6.766-3.828-12.147-6.875-16.22 2.042-27.507-.732-51.368 11.969-79.405l10.562-23.281-23.812 9.312c-17.49 6.838-28.902 19.045-36.594 32.062-.323.546-.563 1.108-.875 1.656.222-22.515 4.408-37.638
+6.594-58.688l1.968-19-17.03 8.656c-30.595 15.556-45.696 48.193-49.72 90.22-4.245-.626-8.831-1.02-13.812-.844-.291-39.18-.396-67.037 8.594-99.375l5.594-20.125-19.438 7.656c-30.91 12.204-47.86 41.931-56.625 68.375-4.383 13.222-6.746 25.801-7.594 35.938a92.19 92.19 0 0 0-.312 7.719c-3.242-.037-6.42.136-10.062.5.041-39.005-3.485-79.754-32.281-116.5L584 696.498zm5.813 43.812c16.807 30.644 17.475 63.967 16.938 99.75l-.22 15.062 12.036-6.54c8.662-3.132 19.56-.227 31.934-.835l14.675 9.357-6.331-25.794c-.09-.23-.22-.417-.25-.72-.2-2.039-.222-5.472.125-9.624.694-8.304 2.79-19.585 6.625-31.156 5.155-15.553 13.488-31.192 25.125-42.531-4.684 28.638-3.216 60.259-3.012 95.805l-2.766 13.262 15.496-7.598c9.03-2.758 17.19-.35 29.281 1.094l13.246 9.444L741.094 840c1.448-30.972 8.222-53.678 20.719-68.875-2.987 19.779-5.43 41.785.313 78.344l1.065 6.373-2.938 11.517 10.617-8.168 9.19 10.222-1.549-10.464
+3.427-6.95c5.7-13.21 10.173-26.212 16.344-36.655.96-1.624 2.031-3.065 3.062-4.563-3.68 21.155-2.427 40.208-4.093 57.781l-4.68 7.807 7.398.225c3.22 3.483 3.868 3.85 4.563 8.656s.318 14.4-2.563 31.625c-5.568 33.288-31.846 77.84-43.74 101.49-6.605 13.13-18.528 57.486-31.123 76.246s-28.53 39.767-37.172 44.42c-21.49 11.575-44.556 25.507-60.619 18.09-14.375-6.636-23.04-21.192-23.814-37.742-.383-8.188.613-21.31 1.625-34.406 1.013-13.097 11.29-22.571 15.423-36.563 5.373-18.181-1.447-36.594-12.5-53.937-6.486-10.178-23.977-24.258-29.548-38.562s-10.368-29.003-11.28-37.656c-.927-8.771.422-23.025 2.218-34.5 1.796-11.475 3.844-20.281 3.844-20.281l9.423-3.615-10.485-3.885s-8.5-15.31-8.094-34.812c.071-3.423 1.836-12.728 4.719-23.188s6.764-22.553 10.625-33.97c3.044-9.002 5.78-16.602 8.344-23.687z" clip-path="url(#am)" enable-background="new" filter="url(#ds)" opacity=".588"/>
+ <g transform="translate(324.57 331.53)" clip-path="url(#is)" enable-background="new" fill="#fff">
+ <path transform="matrix(-.90453 .25066 .25066 .90453 -52.2 74.097)" d="m-15.668 843.49l-49.497-15.556-26.87 52.326 41.012 45.255 49.497-38.184z" enable-background="accumulate" filter="url(#dr)"/>
+ <path transform="matrix(-.90453 .25066 .25066 .90453 -46.928 75.511)" d="m118.71 859.93l-55.154-46.669-43.841 36.77 33.941 53.74-13.597 85.462-39.445 28.292-41.012 11.314-2.828 46.669 56.569 25.456 18.944-69.65 23.457-58.857 46.348-72.615 16.62-39.912z" enable-background="accumulate" filter="url(#dq)"/>
+ </g>
+ <path transform="matrix(-.90453 .25066 .25066 .90453 277.64 407.04)" d="m-70.822 932.58l60.811-26.87 100.41 31.113-63.64 31.113-82.024-16.971-15.556-18.385z" enable-background="accumulate" filter="url(#cy)" opacity=".25"/>
+ <path transform="matrix(-.90453 .25066 .25066 .90453 870.86 206.47)" d="M583.06 715.75c-12.106 34.45-26.714 68.533-31.75 104.84-.832 14.929 4.59 29.159 8.844 43.062-5.916 27.201-10.137 56.9 1.156 83.125 13.517 38.161 35.001 75.682 32.423 117.47-.948 29.294-9.014 60.994 5.39 88.282 10.199 19.335 33.14 27.312 53.968 27.668 27.862 1.174 56.463-11.622 72-35.261 22.596-29.372 41.802-61.497 55.24-96.06 16.89-45.506 29.672-92.561 37.934-140.4 1.824-12.941 3.1-27.47-4.58-38.823-3.43-7.336.043-15.56-.684-23.31.674-24.995 4.013-50.664 16.653-72.596-17.733 6.445-35.073 16.56-44.003 33.864-3.935 6.71-7.605 13.574-11.372 20.386-3.55-30.014 3.72-59.648 6.781-89.281-20.166 9.055-36.877 25.655-44.175 46.682-6.304 15.58-8.802 32.317-10.263 49.037-8.253-1.52-16.684-2.102-25.062-1.5-.963-38.698-.467-79.407 10.97-115.91-18.682 6.218-35.167 18.736-45.629 35.387-13.853 20.88-21.26 45.754-23.059 70.613.586
+4.325-.06 11.84-6.343 9.875-5.332.018-10.63.679-15.938 1.094 1.147-39.381-3.342-81.628-27.062-114.22-3.061-3.637-5.637-7.685-8.625-11.344l-2.813 7.312zm7.75 13.844c18.565 29.296 22.482 64.82 22.125 98.875.204 5.175-.517 11.829.125 16.062 12.319-6.103 26.739-2.44 39.781-2.187 2.317 1.223 3.192 1.652 1.906-1.407-4.164-13.953-1.848-28.613 1.805-42.408 6.367-26.29 20.628-51.088 42.82-67.03-8.617 37.237-5.716 76.562-6.094 113.97 12.253-6.91 27.28-3.446 40.031-.25 3.393 3.535 2.29-.73 2.188-3.812-.483-21.371 4.131-43.07 13.688-62.156 5.963-10.687 14.243-19.804 22.438-28.875-7.872 33.838-9.203 69.336-2.719 103.5 1.725-1.411 4.607-.454 5.656-.375 9.684-21.237 16.351-45.381 34.89-60.742 1.874-.371-1.448 8.525-1.484 11.898-3.535 21.846-7.175 44.142-8.784 66.219-8.784 2.342 2.849 2.323 3.469 4.062 7.923 10.566 4.663 24.405 3.632 36.353-7.064 45.034-22.142 87.362-35.954 130.68-12.075 32.95-27.374
+58.852-47.888 87.202-10.953 13.551-23.245 27.851-40.844 32.5-20.156 6.242-44.207 10.877-62.6.046-17.29-12.34-21.024-35.709-19.262-55.686.048-15.826 4.938-28.512 4.41-43.492-.538-15.263-2.291-30.565-6.542-46.866-4.252-16.302-9.044-24.918-16.12-41.573-7.24-17.045-15.07-36.749-18.204-56.288-1.75-18.627 2.891-37.123 5.78-55.25 3.297-2.837-1.597-5.196-2.312-8.187-7.6-17.015-8.407-36.775-2.742-54.56 7.13-25.072 15.761-49.632 24.68-74.128l2.125 3.906z" clip-path="url(#cj)" enable-background="new" filter="url(#ir)" opacity=".588"/>
+ <path transform="matrix(-.90453 .25066 .25066 .90453 1043.9 219.06)" d="m735.06 733.04l2.755 21.089 44.411-15.388 4.851-22.39-3.936-22.052-22.452-36.593-8.28 30.305-17.35 45.029z" clip-path="url(#e)" enable-background="accumulate" fill="#fff" filter="url(#bz)"/>
+ <path transform="matrix(-.90453 .25066 .25066 .90453 1043.9 219.06)" d="m831.81 730.29l15.822 14.905 20.855 2.9-1.59-39.926 8.325-30.508-7.165-6.341-21.697 20.942-14.55 38.028z" clip-path="url(#e)" enable-background="accumulate" fill="#fff" filter="url(#by)"/>
+ </g>
+ <g transform="translate(324.57 331.53)" clip-path="url(#iq)" enable-background="new" filter="url(#ip)">
+ <path d="M36.494 811.806l-14.799 11.372-17.47-31.162 14.663.65 17.606 19.14z" enable-background="accumulate" fill="#fff" fill-rule="evenodd"/>
+ <path d="M-55 757.2h182v177H-55z" enable-background="accumulate" fill="none"/>
+ </g>
+ <g transform="translate(324.57 331.53)" clip-path="url(#io)" enable-background="new" filter="url(#in)">
+ <path d="m83.111 790.72l-28.201 12.855-5.658-21.687-13.943-25.046 6.325-6.88 26.384 18.51 15.094 22.249z" enable-background="accumulate" fill="#fff" fill-rule="evenodd"/>
+ <path d="M-22 696.2h165v176H-22z" enable-background="accumulate" fill="none"/>
+ </g>
+ <g fill-rule="evenodd">
+ <path d="m1084.8 1267.3c6.794 18.903 10.494 33.3 11.89 51.212 1.397 17.912-3.783 51.801-2.9 70.656 0.881 18.845 8.133 40.099 27.345 48.969 19.419 8.966 49.319 10.211 74.12-3.146 24.8-13.357 57.4-70.326 70.973-97.309 13.624-27.084 38.761-114.5 44.661-149.77s2.551-41.3-4.617-49.055c2.64-27.84-1.5-54.935 13.11-87.186-30.249 11.826-37.382 40.161-48.319 65.505-8-50.933 0.21-71.273 3.319-101.22-29.065 14.778-42.862 47.114-45 92.857-10.924-1.304-21.391-4.434-33.571-0.714-0.264-46.023-1.464-76.889 8.91-114.21-53.254 21.027-62.946 106.59-56.053 112.78-10.883 0.535-21.371-1.297-32.857 2.857 0.638-42.57-0.26-84.909-30-122.86 0 0-30.958 80.922-31.43 103.57-0.47 22.65 9.452 40.166 9.452 40.166s-8.568 36.741-6.298 58.232c2.295 21.741 20.443 59.676 27.266 78.658z" enable-background="new" fill="#ada469"/>
+ <path transform="translate(324.57 331.53)" d="M719.5 738.7l18.312 15.432 44.411-15.388L805.5 713.2l11.464 19.221 30.672 12.784 25.097 5.728L892 723.2l16.023 23.826L947 752.2l10.245-6.198L964 754.7l25.5 11 2-40.5-35.551-14.538-32.493-21.527-40.452-11.466-21.307-15.533L840 685.2l-84.971-46.583-33.03 38.083-2.5 62z" clip-path="url(#e)" enable-background="accumulate" fill="#fff" filter="url(#o)"/>
+ <path transform="translate(498.6 269.37)" d="M584 696.5l-6.563 17.156s-7.811 20.365-15.688 43.656c-3.938 11.646-7.883 24.041-10.938 35.125s-5.335 20.38-5.5 28.281c-.398 19.162 5.747 34.888 8.938 41.75-.772 3.555-1.991 9.454-3.344 18.094-1.92 12.268-3.718 27.154-2.375 39.875 1.382 13.088 6.812 28.188 12.594 43.031s12.054 29.227 15.22 38.031c6.631 18.452 9.992 31.576 11.311 48.5.582 7.456-.242 20.336-1.25 33.375s-2.186 26.301-1.687 36.969c.989 21.14 9.328 46.835 33.375 57.937 22.775 10.515 55.327 11.702 83.438-3.437 16.16-8.704 30.076-27.098 43.375-46.906s24.969-41.053 31.938-54.906c15.353-30.521 39.394-115.46 45.625-152.72 3.018-18.047 3.921-29.066 2.625-38.031-.979-6.766-3.828-12.147-6.875-16.22 2.042-27.507-.732-51.368 11.969-79.405l10.562-23.281-23.812 9.312c-17.49 6.838-28.902 19.045-36.594 32.062-.323.546-.563 1.108-.875 1.656.222-22.515 4.408-37.638 6.594-58.688l1.968-19-17.03
+8.656c-30.595 15.556-45.696 48.193-49.72 90.22-4.245-.626-8.831-1.02-13.812-.844-.291-39.18-.396-67.037 8.594-99.375l5.594-20.125-19.438 7.656c-30.91 12.204-47.86 41.931-56.625 68.375-4.383 13.222-6.746 25.801-7.594 35.938a92.19 92.19 0 0 0-.312 7.719c-3.242-.037-6.42.136-10.062.5.041-39.005-3.485-79.754-32.281-116.5L584 696.498zm5.813 43.812c16.807 30.644 17.475 63.967 16.938 99.75l-.22 15.062 12.036-6.54c8.662-3.132 19.56-.227 31.934-.835l14.675 9.357-6.331-25.794c-.09-.23-.22-.417-.25-.72-.2-2.039-.222-5.472.125-9.624.694-8.304 2.79-19.585 6.625-31.156 5.155-15.553 13.488-31.192 25.125-42.531-4.684 28.638-3.216 60.259-3.012 95.805l-2.766 13.262 15.496-7.598c9.03-2.758 17.19-.35 29.281 1.094l13.246 9.444L741.094 840c1.448-30.972 8.222-53.678 20.719-68.875-2.987 19.779-5.43 41.785.313 78.344l1.065 6.373-2.938 11.517 10.617-8.168 9.19 10.222-1.549-10.464 3.427-6.95c5.7-13.21
+10.173-26.212 16.344-36.655.96-1.624 2.031-3.065 3.062-4.563-3.68 21.155-2.427 40.208-4.093 57.781l-4.68 7.807 7.398.225c3.22 3.483 3.868 3.85 4.563 8.656s.318 14.4-2.563 31.625c-5.568 33.288-31.793 123.17-43.688 146.81-6.605 13.13-18.03 33.896-30.625 52.656s-27.359 35.534-36 40.187c-21.49 11.574-48.78 10.26-64.844 2.844-14.375-6.637-20.538-23.45-21.312-40-.383-8.188.613-21.31 1.625-34.406 1.013-13.097 11.29-22.571 15.423-36.563 5.373-18.181-1.447-36.594-12.5-53.937-6.486-10.178-23.977-24.258-29.548-38.562s-10.368-29.003-11.28-37.656c-.927-8.771.422-23.025 2.218-34.5 1.796-11.475 3.844-20.281 3.844-20.281l9.423-3.616-10.485-3.884s-8.5-15.31-8.094-34.812c.071-3.424 1.836-12.728 4.719-23.188s6.764-22.553 10.625-33.97c3.044-9.002 5.78-16.602 8.344-23.687z" clip-path="url(#am)" enable-background="new" filter="url(#ds)" opacity=".588"/>
+ <g transform="translate(324.57 331.53)" clip-path="url(#im)" fill="#fff">
+ <path d="m824.49 818.48l-49.497-15.556-26.87 52.326 41.012 45.255 49.497-38.184z" enable-background="accumulate" filter="url(#dr)"/>
+ <path d="m964.49 855.25l-55.154-46.669-43.841 36.77 33.941 53.74 7.071 66.468-50.912 35.355-41.012 11.314-2.828 46.669 56.569 25.456 63.64-76.368 24.042-94.752 8.485-57.983z" enable-background="accumulate" filter="url(#dq)"/>
+ </g>
+ <path transform="translate(48.571 195.53)" d="m1045.3 1043.6l60.811-26.87 100.41 31.113-63.64 31.113-82.024-16.971-15.556-18.385z" enable-background="accumulate" filter="url(#cy)" opacity=".25"/>
+ <path transform="translate(498.6 269.37)" d="M583.06 715.75c-12.106 34.45-26.714 68.533-31.75 104.84-.832 14.929 4.59 29.159 8.844 43.062-5.916 27.201-10.137 56.9 1.156 83.125 13.517 38.161 35.001 75.682 32.423 117.47-.948 29.294-9.014 60.994 5.39 88.282 10.199 19.335 33.14 27.312 53.968 27.668 27.862 1.174 56.463-11.622 72-35.261 22.596-29.372 41.802-61.497 55.24-96.06 16.89-45.506 29.672-92.561 37.934-140.4 1.824-12.941 3.1-27.47-4.58-38.823-3.43-7.336.043-15.56-.684-23.31.674-24.995 4.013-50.664 16.653-72.596-17.733 6.445-35.073 16.56-44.003 33.864-3.935 6.71-7.605 13.574-11.372 20.386-3.55-30.014 3.72-59.648 6.781-89.281-20.166 9.055-36.877 25.655-44.175 46.682-6.304 15.58-8.802 32.317-10.263 49.037-8.253-1.52-16.684-2.102-25.062-1.5-.963-38.698-.467-79.407 10.97-115.91-18.682 6.218-35.167 18.736-45.629 35.387-13.853 20.88-21.26 45.754-23.059 70.613.586 4.325-.06 11.84-6.343
+9.875-5.332.018-10.63.679-15.938 1.094 1.147-39.381-3.342-81.628-27.062-114.22-3.061-3.637-5.637-7.685-8.625-11.344l-2.813 7.312zm7.75 13.844c18.565 29.296 22.482 64.82 22.125 98.875.204 5.175-.517 11.829.125 16.062 12.319-6.103 26.739-2.44 39.781-2.187 2.317 1.223 3.192 1.652 1.906-1.407-4.164-13.953-1.848-28.613 1.805-42.408 6.367-26.29 20.628-51.088 42.82-67.03-8.617 37.237-5.716 76.562-6.094 113.97 12.253-6.91 27.28-3.446 40.031-.25 3.393 3.535 2.29-.73 2.188-3.812-.483-21.371 4.131-43.07 13.688-62.156 5.963-10.687 14.243-19.804 22.438-28.875-7.872 33.838-9.203 69.336-2.719 103.5 1.725-1.411 4.607-.454 5.656-.375 9.684-21.237 16.351-45.381 34.89-60.742 1.874-.371-1.448 8.525-1.484 11.898-3.535 21.846-3.297 44.173-4.906 66.25-1.312 1.377 2.849 2.323 3.469 4.062 7.923 10.566 3.123 24.831 2.092 36.78-7.064 45.034-21.766 88.38-35.577 131.7-12.075 32.95-30.72 63.08-51.234 91.43-10.953
+13.55-23.245 27.85-40.844 32.5-20.156 6.24-43.576 5.174-61.97-5.657-17.29-12.34-21.023-35.709-19.261-55.686.048-15.826 2.372-27.8 7.917-42.805s2.471-31.332-1.78-47.633-12.18-26.26-21.822-42.204-17.637-36.037-20.772-55.577c-1.75-18.627 2.892-37.123 5.781-55.25 3.296-2.837-1.598-5.196-2.312-8.187-7.602-17.015-8.408-36.775-2.743-54.56 7.13-25.072 15.761-49.632 24.68-74.128l2.125 3.906z" clip-path="url(#cj)" enable-background="new" filter="url(#il)" opacity=".588"/>
+ <path transform="translate(324.57 331.53)" d="m735.06 733.04l2.755 21.089 44.411-15.388 4.851-22.39-3.936-22.052-22.452-36.593-8.28 30.305-17.35 45.029z" clip-path="url(#e)" enable-background="accumulate" fill="#fff" filter="url(#bz)"/>
+ <path transform="translate(324.57 331.53)" d="m831.81 730.29l15.822 14.905 20.855 2.9-1.59-39.926 8.325-30.508-7.165-6.341-21.697 20.942-14.55 38.028z" clip-path="url(#e)" enable-background="accumulate" fill="#fff" filter="url(#by)"/>
+ </g>
+ <g transform="translate(324.57 331.53)" clip-path="url(#ik)" filter="url(#ij)">
+ <path d="M910.14 746.31l32.613 5.174-.361-23.876 7.188-29.682-8.45-5.264-21.823 26.511-9.167 27.137z" enable-background="accumulate" fill="#fff" fill-rule="evenodd"/>
+ <path d="M877.52 650.19h123.04v172.53H877.52z" enable-background="accumulate" fill="none"/>
+ </g>
+ <g transform="translate(324.57 331.53)" clip-path="url(#ii)" filter="url(#ih)">
+ <path d="M964 754.69l18.429 7.465 9.071-36.964-14.87 4.839L964 754.69z" enable-background="accumulate" fill="#fff" fill-rule="evenodd"/>
+ <path d="M924.9 677.06h142.13v125.16H924.9z" enable-background="accumulate" fill="none"/>
+ </g>
+ <g stroke-miterlimit="1">
+ <path d="m596.57 400.85h440v376h-440z" fill="none" stroke="#f8d615" stroke-width="18"/>
+ <path d="m104.57 248.85h1684v1292h-1684z" fill="none" stroke="#f83615" stroke-width="18"/>
+ <path d="M3407.4 296.46h522.57v1182.5H3407.4z" fill="url(#ig)" stroke="#f815bb" stroke-width="13.347"/>
+ </g>
+ <g transform="matrix(1.0057 0 0 2.3995 3452.3 -18.515)" clip-path="url(#if)" enable-background="new">
+ <g filter="url(#aq)">
+ <g transform="translate(-174.03 62.156)" filter="url(#g)">
+ <path d="m1268.3 663.77s-0.296 26.161 4.643 37.857 20.038 26.487 28.572 31.429 18.929 8.571 18.929 8.571l117.86-115 17.857-75.714-96.43 38.571-91.428 74.286z" enable-background="new" fill="#fff" fill-rule="evenodd"/>
+ <path d="M1197.8 486.14h333.75v309.71H1197.8z" enable-background="accumulate" fill="none"/>
+ </g>
+ </g>
+ <g transform="translate(-174.03 62.156)" enable-background="new" filter="url(#g)" opacity=".18">
+ <path d="m1268.3 663.77s-0.296 26.161 4.643 37.857 20.038 26.487 28.572 31.429 18.929 8.571 18.929 8.571l117.86-115 17.857-75.714-96.43 38.571-91.428 74.286z" enable-background="new" fill="#fff" fill-rule="evenodd"/>
+ <path d="M1197.8 486.14h333.75v309.71H1197.8z" enable-background="accumulate" fill="none"/>
+ </g>
+ </g>
+ <path d="M3492.3 296.46H3930v902.66h-437.7z" fill="#fff" stroke="#f8d615" stroke-miterlimit="1" stroke-width="18"/>
+ <g transform="matrix(1.0057 0 0 2.3995 3249.4 125.01)" clip-path="url(#ie)" enable-background="new" filter="url(#id)">
+ <path d="M36.494 811.806l-14.799 11.372-17.47-31.162 14.663.65 17.606 19.14z" enable-background="accumulate" fill="#fff" fill-rule="evenodd"/>
+ <path d="M-55 757.2h182v177H-55z" enable-background="accumulate" fill="none"/>
+ </g>
+ <g transform="matrix(1.0057 0 0 2.3995 3249.4 125.01)" clip-path="url(#ic)" enable-background="new" filter="url(#gd)">
+ <path d="m83.111 790.72l-28.201 12.855-5.658-21.687-13.943-25.046 6.325-6.88 26.384 18.51 15.094 22.249z" enable-background="accumulate" fill="#fff" fill-rule="evenodd"/>
+ <path d="M-22 696.2h165v176H-22z" enable-background="accumulate" fill="none"/>
+ </g>
+ <path transform="matrix(1.0057 0 0 2.3995 3249.4 125.01)" d="m332.34 898.39l-32.732-61.3-37.617 45.106c2.177 1.317 5.774-20.856 45.6-64.417l24.749 80.61z" clip-path="url(#gc)" enable-background="accumulate" fill="#fff" fill-rule="evenodd" filter="url(#gb)" opacity=".5"/>
+ <g clip-path="url(#ga)">
+ <g fill-rule="evenodd">
+ <g enable-background="new">
+ <path transform="matrix(.71488 -.46488 .26446 2.3151 3478.4 126.16)" d="m245.12 100.05s-47.128-31.647-67.215-35.801c-20.038-4.144-38.473-3.318-51.934 13.607s-12.077 61.265-13.536 86.97 2.55 70.177 17.605 88.666c15.055 18.488 45.886 13.585 49.927 21.414 2.213 4.287 65.152-174.86 65.152-174.86z" enable-background="accumulate" fill="url(#r)"/>
+ <path transform="matrix(.71488 -.46488 .26446 2.3151 3478.4 126.16)" d="M135.38 82.018s26.344 1.939 37.633 13.903c11.415 12.097 13.735 21.332 15.296 37.735 1.563 16.425-.85 28.418-7.814 36.037s-1.004 19.583-25.916 12.071-27.032-27.783-26.515-46.305c.517-18.529 7.316-53.441 7.316-53.441z" enable-background="accumulate" fill="url(#q)"/>
+ <path transform="matrix(.71488 -.46488 .26446 2.3151 3478.4 126.16)" d="M135.65 81.927s-4.645 16.365.588 28.563c5.488 12.793 27.224 44.26 27.224 54.656l22.656-5c2.542-6.966 3.21-15.752 2.188-26.5-1.562-16.403-3.867-25.621-15.281-37.719-9.655-10.232-31.593-13.375-37.375-14z" enable-background="new" fill="url(#p)"/>
+ </g>
+ <g enable-background="new">
+ <path d="M4043.297 824.626l-.09-.006c-1.489 1.728-6.783 2.02-7.718 20.884-.878 17.694 13.035 44.859 15.06 47.837 1.636 2.403 3.427 4.343 5.205 5.58l1.41.916c1.894 1.031 3.7 1.38 5.163 1.19 3.177-.414 5.214-.812 7.238-1.183 2.025-.372 2.592-1.8 3.707-2.078 1.156-.288 2.255.9 6.345-.372 4.09-1.271 5.587-1.894 6.324-2.566.765-.698 1.86-1.592 2.549-2.999 1.962.51 3.823.346 5.31-.58 3.08-1.92 5.084-3.12 6.998-4.722 1.536-1.285 2.513-3.421 2.759-4.073.246-.653.183-1.71.211-1.754.047-.072.351-.13.55-.906 1.07-4.167 2.968-12.778
+3.16-14.38.193-1.594.324-3.178.42-4.11.056-.54-.046-2.136-.017-2.27.04-.187.317-.518.401-1.098.404-2.783.343-5.237.292-8.675-.05-3.438-.44-11.267-.995-13.482-.356-1.423-.708-2.109-1.051-2.478-.065-.06-.119-.145-.18-.2-.02-.015-.043-.004-.062-.017-.303-.265-.59-.545-1.13-.839-.972-.527-2.393-1.283-3.937-1.684-.514-.134-1.041-.17-1.572-.205-3.591-.231-9.115-.108-10.396 1.072-1.593-1.244-3.874-2.542-5.879-2.746-3.086-.313-5.002-.546-6.953-.776-1.952-.23-1.73.464-2.958.32-1.328-.155-1.76-1.022-5.568-1.302-3.577-.262-9.087-.095-10.397 1.072-1.593-1.245-3.872-2.542-5.878-2.746-3.087-.313-5.006-.472-6.958-.702-.663-.078-1.055.01-1.364.079z" enable-background="new" fill="#bcb786"/>
+ <g transform="matrix(1.0047 .1075 -.04506 2.3971 3818.4 1782.9)" clip-path="url(#fz)" enable-background="new" filter="url(#fy)">
+ <path d="M229.94-409.12c-3.558.05-9.024.36-10.303.904-1.606-.447-3.903-.881-5.9-.877a979.03 979.03 0 0 1-6.907 0c-.66-.003-1.048.068-1.353.11v1.096c.12-.18.393-.69.95-.767.747-.103 5.17-.151 7.31-.11 1.775.035 4.455.274 6.39.96.32.113.618.273.891.41 1.964.987 7.944 4.302 7.944 4.302s-6.633-3.948-7.483-4.439c-.203-.117-.575-.258-1.036-.41 1.22-.449 5.076-.62 7.828-.713 3.024-.102 3.348-.09 5.41.192 2.13.29 3.34.602 3.34.602s-.08-.64 1.035-.794c.748-.103 5.17-.152 7.31-.11 2.07.04 5.366.407 7.282 1.37 1.003.504 3.035 1.569 4.795 2.536l.096-.02s-3.58-2.162-4.43-2.653c-.204-.117-.575-.258-1.037-.411 1.22-.448 5.047-.62 7.8-.712 3.024-.102 3.347-.09 5.41.191 1.954.267 3.013.53 3.195.576l-.027-.312a8.503 8.503 0 0 0-1.4-.357c-1.301-.235-3.4-.602-5.51-.564-3.571.064-9.052.356-10.302.904-1.606-.447-3.877-.881-5.871-.877-3.072.007-4.994.01-6.936
+0-1.943-.009-1.713.28-2.936.274-1.322-.005-1.766-.354-5.555-.301M206.2-407.48c1.92.817 4.577 2.193 6.159 3.397s2.908 1.774 5.555 3.918c.885.718 1.748 1.35 2.591 1.922l.541-.19a57.511 57.511 0 0 1-2.269-1.622c-2.822-2.12-3.627-2.81-6.015-4.274s-4.1-2.366-6.562-3.15" enable-background="new"/>
+ <path d="M237.8-407.48c1.92.817 4.606 2.193 6.188 3.397.813.62 1.558 1.07 2.45 1.654l.65-.116a40.414 40.414 0 0 0-2.697-1.784c-2.389-1.465-4.128-2.366-6.59-3.151" enable-background="new"/>
</g>
- <rect
- id="rect6247"
- width="440"
- height="376"
- x="548"
- y="205.32275"
- style="opacity:1;fill:none;fill-opacity:1;stroke:#f8d615;stroke-width:18;stroke-linejoin:miter;stroke-miterlimit:1;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1" />
- <rect
- style="opacity:1;fill:none;fill-opacity:1;stroke:#f83615;stroke-width:18;stroke-linejoin:miter;stroke-miterlimit:1;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1"
- id="rect6676"
- width="1684"
- height="1292"
- x="56"
- y="53.322754" />
- <rect
- style="opacity:1;fill:url(#pattern5557);fill-opacity:1;stroke:#f815bb;stroke-width:13.34657478;stroke-linejoin:miter;stroke-miterlimit:1;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1"
- id="rect6731"
- width="522.56604"
- height="1182.4679"
- x="3493.3721"
- y="87.178711" />
- <g
- id="g7477"
- transform="matrix(0.53474256,0,0,1,1882.7509,3.0962157)">
- <rect
- y="99.705269"
- x="3039.4895"
- height="902.66437"
- width="818.51605"
- id="rect6979"
- style="opacity:1;fill:#ffffff;fill-opacity:1;stroke:#f8d615;stroke-width:18;stroke-linejoin:miter;stroke-miterlimit:1;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1" />
- <g
- clip-path="url(#clipPath6975)"
- id="g4303-9"
- style="display:inline;enable-background:new"
- transform="matrix(1.8806916,0,0,2.3994874,1997.8763,-394.32602)">
- <path
- inkscape:connector-curvature="0"
- style="display:inline;opacity:0.5;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter11361-3);enable-background:new"
- d="m 304.64285,526.6479 c -10,0.35715 -18.21428,2.85714 -18.21428,2.85714 l 7.5,6.07143 10.35714,3.57143 16.07143,0.35714 22.5,-5.35714 7.85714,1.07143 20.35715,-2.14286 -10.35715,6.78572 c 5.45923,-1.02361 17.39329,3.56911 9.64286,5.35714 -1.74,0.40142 13.92857,-4.64285 13.92857,-4.64285 l 2.5,-4.64287 3.57143,-9.28571 11.42857,0 18.21428,-4.64286 3.57144,-4.99999 -16.07144,1.07142 -12.14285,2.14286 -14.64286,-5 -70.6921,16.70774 -5.37933,-5.27917 z"
- id="path10326-6"
- sodipodi:nodetypes="cccccccccsccccccccccc"
- transform="matrix(10.726753,0,0,10.726753,-2882.1235,-4565.4583)"
- inkscape:export-filename="/home/cheeseness/Documents/LCA09/mascot/tuz_new.png"
- inkscape:export-xdpi="142.10527"
- inkscape:export-ydpi="142.10527" />
- <g
- style="display:inline;opacity:1;enable-background:new"
- id="g7882-9"
- transform="matrix(0.71084,-0.1937433,0.262963,0.9648058,503.68027,136.48399)">
- <path
- inkscape:connector-curvature="0"
- sodipodi:nodetypes="czzzzcc"
- id="path7876-3"
- d="m 245.12255,100.05344 c 0,0 -47.12811,-31.646921 -67.21465,-35.800939 -20.03792,-4.143963 -38.4729,-3.317578 -51.93364,13.607323 -13.46074,16.924901 -12.07739,61.265196 -13.53554,86.969546 -1.45815,25.70435 2.54945,70.17701 17.6046,88.66552 15.05516,18.4885 45.88634,13.58502 49.92695,21.4137 2.21283,4.28736 65.15228,-174.85515 65.15228,-174.85515 z"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:url(#radialGradient7904-7);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate" />
- <path
- inkscape:connector-curvature="0"
- sodipodi:nodetypes="czzzzzc"
- id="path7878-3"
- d="m 135.37935,82.017807 c 0,0 26.34355,1.938783 37.63307,13.903188 11.41494,12.097335 13.73457,21.331515 15.29586,37.734585 1.56337,16.42499 -0.84957,28.41812 -7.81382,36.03734 -6.96425,7.61922 -1.00429,19.58332 -25.91605,12.07107 -24.91176,-7.51225 -27.03224,-27.78298 -26.51523,-46.30475 0.51721,-18.52898 7.31617,-53.441433 7.31617,-53.441433 z"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:url(#radialGradient7906-6);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate" />
- <path
- inkscape:connector-curvature="0"
- sodipodi:nodetypes="czccssc"
- id="path7880-8"
- d="m 135.648,81.927211 c 0,0 -4.64465,16.365075 0.58825,28.563099 5.48794,12.79254 27.22425,44.26007 27.22425,54.65565 l 22.65625,-5 c 2.54218,-6.96644 3.21052,-15.75206 2.1875,-26.5 -1.56129,-16.40307 -3.8663,-25.62141 -15.28125,-37.718749 -9.65488,-10.232047 -31.59311,-13.374857 -37.375,-14 z"
- style="display:inline;opacity:1;fill:url(#radialGradient7908-0);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new" />
- </g>
- <path
- inkscape:connector-curvature="0"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 845.03125,1154.7776 c -4.28571,0.7143 -27.62815,3.6181 -57.85714,10 -30.22899,6.3819 -57.31395,4.9661 -135.78608,17.3296 -79.85178,12.5808 -94.06436,42.5423 -108.12225,47.0643 -14.70014,4.7286 -145.37739,-65.8225 -145.37739,-65.8225 l 4.28572,-94.2857 c 0,0 85.88551,-16.2009 112.14285,-33.5714 26.25735,-17.3705 45.58238,-49.66602 59.28572,-71.42861 13.70334,-21.76259 32.85714,-71.42858 32.85714,-71.42858 l 238.57143,262.14289 z"
- id="path7917-0"
- sodipodi:nodetypes="czzzcczzcc" />
- <path
- inkscape:connector-curvature="0"
- style="display:inline;overflow:visible;visibility:visible;opacity:0.5;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter8888-6);enable-background:accumulate"
- d="m 332.34019,898.38549 -32.73181,-61.29956 -37.61734,45.10646 c 2.17675,1.31711 5.77425,-20.85603 45.6004,-64.41708 l 24.74875,80.61018 z"
- id="path7919-5"
- clip-path="url(#clipPath8658-06)"
- sodipodi:nodetypes="ccccc"
- transform="translate(276,136)" />
- <path
- inkscape:connector-curvature="0"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:url(#linearGradient6951);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter8892-7);enable-background:accumulate"
- d="m 200.81833,863.03015 146.3711,-51.61879 243.95184,226.27414 -241.83052,140.0072 -181.01934,-87.6813 32.52692,-226.98125 z"
- id="path7923-6"
- clip-path="url(#clipPath2833-2)"
- sodipodi:nodetypes="cccccc"
- transform="translate(276,136)" />
- <path
- inkscape:connector-curvature="0"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#0f0f0f;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 642.88839,640.13471 c 0,0 -29.55406,40.57305 -47.85714,74.28571 -18.30309,33.71267 -58.62109,126.35694 -70.35714,171.07143 -11.7594,44.80344 -62.5,123.57145 -62.5,123.57145 l 76.07143,18.2143 c 0,0 11.80712,-12.8234 31.07142,-46.07146 19.2643,-33.24808 60.35715,-138.57143 60.35715,-138.57143 l 13.21428,-202.5 z"
- id="path7921-6"
- sodipodi:nodetypes="czzcczcc" />
- <path
- inkscape:connector-curvature="0"
- style="display:inline;overflow:visible;visibility:visible;opacity:0.4;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter8856-2);enable-background:accumulate"
- d="m 430.28131,381.94122 c -7.07106,2.82843 -236.18124,32.15181 -236.18124,32.15181 l -39.63961,359.83304 90.19849,92.63961 52.3259,-114.5513 100.46804,-186.39192 32.82842,-183.68124 z"
- id="path7925-4"
- sodipodi:nodetypes="ccccccc"
- clip-path="url(#clipPath3665-9)"
- transform="translate(276,136)" />
- <path
- inkscape:connector-curvature="0"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 969.67051,1164.0346 c 0,0 23.25628,11.3937 36.06779,20.4761 12.6974,9.0015 29.4724,24.6491 41.6924,37.3605 12.3055,12.8002 20.1127,22.5987 41.5327,24.1608 21.4322,1.5629 53.2824,-8.7876 73.296,-24.6642 20.0135,-15.8766 45.6469,-69.2328 45.6469,-69.2328 l -127.1608,-143.0717"
- id="path7927-0"
- sodipodi:nodetypes="czzzzcc" />
- <path
- inkscape:connector-curvature="0"
- style="display:inline;overflow:visible;visibility:visible;opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter8860-3);enable-background:accumulate"
- d="M 331.34019,641.50471 216.17367,835.36467 260.2153,925.96265 357.79603,732.21539 331.34019,641.50471 Z"
- id="path7929-0"
- clip-path="url(#clipPath8642-9)"
- sodipodi:nodetypes="ccccc"
- transform="translate(276,136)" />
- <g
- style="display:inline;opacity:1;enable-background:new"
- id="g7931-4"
- transform="matrix(0.9934486,0.1142802,-0.1142802,0.9934486,-9.24324,588.09054)"
- inkscape:transform-center-x="-347.89063"
- inkscape:transform-center-y="-28.255779">
- <path
- inkscape:connector-curvature="0"
- style="display:inline;opacity:1;fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 1049.205,-282.26672 -0.09,0.008 c -1.3874,0.88445 -6.6033,1.6072 -6.629,9.52344 -0.024,7.42525 15.0129,17.09146 17.1563,18.09375 1.7302,0.80909 3.5916,1.40876 5.4063,1.71875 l 1.4374,0.21875 c 1.9197,0.21194 3.72,0.15141 5.1563,-0.0937 3.1191,-0.5324 5.1116,-0.92861 7.0937,-1.3125 1.9821,-0.38387 2.4743,-1.03965 3.5626,-1.28125 1.1287,-0.25066 2.2702,0.11629 6.25,-0.875 3.9795,-0.99128 5.4294,-1.4193 6.125,-1.78125 0.7222,-0.37601 1.7617,-0.87058 2.375,-1.53125 1.9629,-0.012 3.7937,-0.29105 5.2187,-0.84375 2.9512,-1.14461 4.8732,-1.86942 6.6875,-2.75 1.4557,-0.70653 2.3191,-1.70203 2.5312,-2 0.2123,-0.29796 0.099,-0.72855 0.125,-0.75 0.043,-0.0352 0.3405,-0.094 0.5,-0.4375 0.859,-1.84708 2.3232,-5.62764 2.4376,-6.3125 0.1137,-0.68215 0.168,-1.35277 0.2187,-1.75 0.029,-0.22951 -0.1471,-0.8789 -0.125,-0.9375 0.031,-0.082 0.2883,-0.25057 0.3437,-0.5 0.2663,-1.19832 0.089,-2.20736 -0.125,-3.625 -0.2139,-1.41764 -0.9716,-4.61463 -1.625,-5.46875 -0.4194,-0.54857 -0.7993,-0.7925 -1.1562,-0.90625 -0.067,-0.0173 -0.1239,-0.0467 -0.1875,-0.0625 -0.021,-0.004 -0.042,0.003 -0.062,0 -0.3116,-0.0755 -0.6085,-0.15867 -1.1562,-0.21875 -0.9855,-0.10812 -2.4247,-0.2594 -3.9688,-0.25 -0.5147,0.003 -1.0371,0.0476 -1.5625,0.0937 -3.5589,0.31228 -9.0098,0.99108 -10.2187,1.625 -1.6331,-0.33402 -3.9482,-0.61223 -5.9376,-0.46875 -3.064,0.22097 -4.9677,0.34219 -6.9062,0.46875 -1.9384,0.12655 -1.6861,0.38864 -2.9062,0.46875 -1.3191,0.0866 -1.7869,-0.22325 -5.5626,0.0937 -3.5457,0.29772 -8.9806,0.99317 -10.2187,1.625 -1.6334,-0.33451 -3.9459,-0.61239 -5.9375,-0.46875 -3.0642,0.22098 -4.9678,0.37344 -6.9062,0.5 -0.6592,0.043 -1.0424,0.12393 -1.3438,0.1875 z"
- id="path7933-6" />
- <g
- clip-path="url(#clipPath7616-1)"
- style="display:inline;filter:url(#filter7610-9);enable-background:new"
- id="g7935-2"
- transform="matrix(0.9975712,-0.06965428,0.06965428,0.9975712,872.72062,140.02502)">
- <path
- inkscape:connector-curvature="0"
- sodipodi:nodetypes="ccssscsssscscsscsssccscssccsscssscc"
- id="path7937-6"
- d="m 229.94262,-409.12268 c -3.55781,0.05 -9.0242,0.36009 -10.30334,0.90414 -1.60609,-0.44747 -3.90316,-0.88131 -5.89995,-0.87674 -3.07199,0.007 -4.96469,0.009 -6.90727,0 -0.66047,-0.003 -1.04759,0.0672 -1.35267,0.10959 0,0 0,1.09593 0,1.09593 0.11972,-0.17947 0.39252,-0.69046 0.94975,-0.76715 0.74758,-0.10289 5.16928,-0.15123 7.31019,-0.1096 1.7746,0.0345 4.45523,0.27427 6.38921,0.95895 0.3214,0.11378 0.61925,0.27378 0.89219,0.41097 1.96342,0.98693 7.94336,4.30154 7.94336,4.30154 0,0 -6.63275,-3.94768 -7.48287,-4.43853 -0.20331,-0.11739 -0.57464,-0.25769 -1.03609,-0.41098 1.22063,-0.44779 5.07597,-0.61971 7.82823,-0.71235 3.0245,-0.10182 3.34776,-0.0896 5.41069,0.19179 2.12931,0.29043 3.33851,0.60276 3.33851,0.60276 -1e-5,0 -0.0784,-0.64118 1.03609,-0.79455 0.74757,-0.10289 5.16929,-0.15123 7.31019,-0.1096 2.0695,0.0403 5.36605,0.40716 7.2814,1.36992 1.00332,0.50433 3.03564,1.56863 4.79535,2.53571 l 0.0956,-0.0194 c 0,0 -3.58034,-2.16242 -4.43047,-2.65327 -0.20331,-0.11739 -0.57463,-0.25769 -1.03609,-0.41098 1.22062,-0.44779 5.04719,-0.61971 7.79945,-0.71235 3.0245,-0.10182 3.34775,-0.0896 5.41069,0.19179 1.95316,0.2664 3.01292,0.53006 3.19461,0.57536 0,0 -0.0271,-0.31146 -0.0271,-0.31146 -0.40903,-0.13645 -0.71424,-0.23335 -1.40038,-0.35748 -1.30081,-0.23533 -3.39912,-0.60156 -5.50857,-0.56398 -3.57195,0.0636 -9.05328,0.35596 -10.30334,0.90414 -1.60583,-0.44695 -3.87662,-0.8813 -5.87117,-0.87674 -3.07199,0.007 -4.99348,0.009 -6.93605,0 -1.94256,-0.009 -1.71268,0.27907 -2.93558,0.27398 -1.32191,-0.005 -1.76612,-0.35463 -5.55459,-0.30138 0,0 0,0 0,0"
- style="display:inline;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- id="path7939-7"
- d="m 206.1989,-407.47878 c 1.92021,0.81706 4.57715,2.19283 6.15897,3.39739 1.58184,1.20456 2.90757,1.77368 5.55459,3.91795 0.88557,0.71738 1.74865,1.34985 2.59193,1.92174 l 0.54057,-0.19011 c -0.71323,-0.48339 -1.46776,-1.02031 -2.26909,-1.62203 -2.82223,-2.11921 -3.62655,-2.80973 -6.01507,-4.27414 -2.38854,-1.4644 -4.09948,-2.36576 -6.5619,-3.1508 0,0 0,0 0,0"
- style="display:inline;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- sodipodi:nodetypes="cssccsscc" />
- <path
- inkscape:connector-curvature="0"
- id="path7941-5"
- d="m 237.79963,-407.47878 c 1.92021,0.81706 4.60594,2.19283 6.18775,3.39739 0.81307,0.61916 1.55849,1.07042 2.45046,1.65401 l 0.649,-0.11666 c -0.79831,-0.57637 -1.57177,-1.09435 -2.69653,-1.78394 -2.38854,-1.4644 -4.12826,-2.36576 -6.59068,-3.1508 0,0 0,0 0,0"
- style="display:inline;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- sodipodi:nodetypes="csccscc" />
- </g>
- <g
- clip-path="url(#clipPath7606-1)"
- id="g7943-6">
- <path
- inkscape:connector-curvature="0"
- style="display:inline;opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter7578-4);enable-background:new"
- d="m 1056.25,-278.80481 c 4.1446,-1.47877 10,3.125 10,3.125 0.899,0.28092 2.7251,-0.89447 2.6243,-1.68614 0,0 -1.5503,-1.86062 -0.3743,-2.93886 1.176,-1.07824 5.296,1.50738 7.5,1.625 2.204,0.11762 5.5621,-0.22941 7,-0.75 1.4379,-0.52059 1.1129,-1.42459 2.625,-1.75 1.5121,-0.32541 5.1189,1.03754 7.0605,1.16883 1.9416,0.13129 4.6481,0.33427 5.8145,-0.16883 1.1664,-0.5031 0.1782,-1.15921 1.875,-1.875 1.6968,-0.71579 7.7602,-0.95662 9.625,-0.125 1.8648,0.83162 1.8099,0.5192 2.625,3 0.8151,2.4808 7.4398,5.16285 -1.125,13.375 -8.5648,8.21215 -59.3779,13.78594 -65.625,2.75 -6.2471,-11.03594 6.2304,-14.27123 10.375,-15.75 z"
- id="path7945-9"
- sodipodi:nodetypes="czzzzzzzzzzzzzz" />
- <path
- inkscape:connector-curvature="0"
- style="display:inline;opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter7594-8);enable-background:new"
- d="m 1058.5,-275.42981 c 4.1446,-1.47877 10,3.125 10,3.125 0.899,0.28092 2.7251,-0.89447 2.6243,-1.68614 0,0 -1.5503,-1.86062 -0.3743,-2.93886 1.176,-1.07824 5.296,1.50738 7.5,1.625 2.204,0.11762 5.5621,-0.22941 7,-0.75 1.4379,-0.52059 1.1129,-1.42459 2.625,-1.75 1.5121,-0.32541 5.1189,1.03754 7.0605,1.16883 1.9416,0.13129 4.6481,0.33427 5.8145,-0.16883 1.1664,-0.5031 0.1782,-1.15921 1.875,-1.875 1.6968,-0.71579 7.7602,-0.95662 9.625,-0.125 1.8648,0.83162 1.8099,0.5192 2.625,3 0.8151,2.4808 7.4398,5.16285 -1.125,13.375 -8.5648,8.21215 -59.3779,13.78594 -65.625,2.75 -6.2471,-11.03594 6.2304,-14.27123 10.375,-15.75 z"
- id="path7947-8"
- sodipodi:nodetypes="czzzzzzzzzzzzzz" />
- </g>
- </g>
- <path
- inkscape:connector-curvature="0"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#101414;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 628.24553,347.99185 c -3.80443,-25.26423 -16.80972,-50.63802 -17.1568,-75.52523 -0.18626,-13.35552 3.27285,-26.57091 13.75553,-39.55405 36.34702,-65.29583 116.94091,-84.69468 185.93466,-91.46542 86.92239,-11.0168 184.91267,17.94007 233.37138,95.40128 54.124,75.7333 56.6747,172.53912 80.612,259.52795 29.4378,127.1276 54.7791,256.21414 60.3922,386.85035 -3.0634,78.18185 -8.4263,165.18417 -60.5032,228.13417 -48.0265,50.3574 -122.7864,50.053 -187.06985,59.0023 -90.55539,4.655 -184.35153,-16.1458 -261.7839,-64.1982 -64.77564,-37.94 -95.73019,-113.47867 -97.2794,-186.01962 -8.38917,-79.87516 26.39152,-153.80851 51.6204,-227.15961 7.47061,-82.76107 9.41286,-166.24775 9.65334,-249.38484 -0.83682,-32.19544 -7.08953,-63.81733 -11.54636,-95.60908 z"
- id="path7949-7"
- sodipodi:nodetypes="cscccccccccccc" />
- <path
- inkscape:connector-curvature="0"
- style="display:inline;overflow:visible;visibility:visible;opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter8940-3);enable-background:accumulate"
- d="m 311.83409,415.43155 9.8995,121.62237 -60.10408,136.47161 15.55635,174.65537 c 15.61326,61.8792 32.18545,98.66905 74.37615,117.05383 4.31911,-36.23998 -38.61152,-142.95988 -39.24264,-189.11984 -0.63145,-46.18445 10.83034,-108.60786 30.67767,-158.29647 20.04835,-50.19188 36.89674,-44.84642 42.12489,-92.59293 5.22815,-47.74651 -17.4264,-149.39192 -17.4264,-149.39192 l -55.86144,39.59798 z"
- id="path7951-2"
- sodipodi:nodetypes="ccccczzzcc"
- clip-path="url(#clipPath8616-5)"
- transform="translate(276,136)" />
- <path
- inkscape:connector-curvature="0"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:url(#linearGradient6953);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 1010.0312,655.49186 c 0,0 16.7552,37.01806 28.7015,53.95395 11.9462,16.93589 52.7271,56.04605 52.7271,56.04605 l 52.5972,-127.58975"
- id="path7953-8"
- sodipodi:nodetypes="czcc" />
- <path
- inkscape:connector-curvature="0"
- style="display:inline;overflow:visible;visibility:visible;opacity:0.07999998;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter8822-2);enable-background:accumulate"
- d="m 730.31998,536.56864 c 0,8.48528 42.54774,58.46803 42.54774,58.46803 l 12.60659,-28.76954 -55.15433,-29.69849 z"
- id="path7955-2"
- sodipodi:nodetypes="cccc"
- clip-path="url(#clipPath8209-6)"
- transform="translate(276,136)" />
- <g
- transform="translate(450.03125,73.843964)"
- style="display:inline;opacity:1;enable-background:new"
- id="g7957-9"
- clip-path="url(#clipPath3998-6)">
- <g
- transform="translate(-174.03125,62.156036)"
- style="filter:url(#filter3677-5)"
- id="g7959-9">
- <g
- id="g7961-6"
- style="filter:url(#filter3785-4)">
- <path
- inkscape:connector-curvature="0"
- sodipodi:nodetypes="czzzzzzzzzz"
- id="path7963-0"
- d="m 425.88244,476.99186 c 10.80543,-1.47866 24.74401,3.35451 44.64286,3.21428 19.89885,-0.14023 57.45322,-16.91122 82.14285,-17.14286 24.68963,-0.23164 62.7517,12.28406 79.28572,15 16.53402,2.71594 22.84832,-0.15852 27.49999,7.85715 4.65167,8.01567 1.92671,10.74724 -10.35714,20.71429 -12.28385,9.96705 -40.78968,12.63632 -66.07143,12.85714 -25.28234,0.22082 -70.38129,7.07852 -95.35714,3.92856 -24.97585,-3.14996 -56.93756,-7.82267 -68.92857,-17.85714 -11.99101,-10.03447 -19.85084,-16.73182 -17.5,-23.92857 2.35084,-7.19675 13.83743,-3.16419 24.64286,-4.64285 z"
- style="display:inline;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new" />
- <rect
- y="412.60312"
- x="343.6539"
- height="181.01935"
- width="381.83765"
- id="rect7965-2"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate" />
- </g>
- <g
- id="g7967-7"
- style="filter:url(#filter3785-4)">
- <path
- inkscape:connector-curvature="0"
- sodipodi:nodetypes="czzzcc"
- id="path7969-6"
- d="m 687.14286,452.36218 c -10.46169,9.71443 -86.9796,19.00514 -100.71429,29.28572 -13.73469,10.28058 -14.75252,12.88826 -12.14286,20 2.60966,7.11174 6.54527,9.40572 25.71429,8.57142 19.16902,-0.8343 98.57143,-27.62172 98.57143,-21.42857 l -11.42857,-36.42857 z"
- style="display:inline;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- transform="translate(174.03125,-62.156036)" />
- <rect
- y="344.82138"
- x="702.86414"
- height="162.63455"
- width="207.8894"
- id="rect7971-1"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate" />
- </g>
- </g>
- <g
- transform="translate(-174.03125,62.156036)"
- style="display:inline;opacity:0.18000004;enable-background:new"
- id="g7973-3">
- <g
- id="g7975-2"
- style="filter:url(#filter3785-4)">
- <path
- inkscape:connector-curvature="0"
- sodipodi:nodetypes="czzzzzzzzzz"
- id="path7977-1"
- d="m 425.88244,476.99186 c 10.80543,-1.47866 24.74401,3.35451 44.64286,3.21428 19.89885,-0.14023 57.45322,-16.91122 82.14285,-17.14286 24.68963,-0.23164 62.7517,12.28406 79.28572,15 16.53402,2.71594 22.84832,-0.15852 27.49999,7.85715 4.65167,8.01567 1.92671,10.74724 -10.35714,20.71429 -12.28385,9.96705 -40.78968,12.63632 -66.07143,12.85714 -25.28234,0.22082 -70.38129,7.07852 -95.35714,3.92856 -24.97585,-3.14996 -56.93756,-7.82267 -68.92857,-17.85714 -11.99101,-10.03447 -19.85084,-16.73182 -17.5,-23.92857 2.35084,-7.19675 13.83743,-3.16419 24.64286,-4.64285 z"
- style="display:inline;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new" />
- <rect
- y="412.60312"
- x="343.6539"
- height="181.01935"
- width="381.83765"
- id="rect7979-5"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate" />
- </g>
- <g
- id="g7981-9"
- style="filter:url(#filter3785-4)">
- <path
- inkscape:connector-curvature="0"
- sodipodi:nodetypes="czzzcc"
- id="path7983-9"
- d="m 687.14286,452.36218 c -10.46169,9.71443 -86.9796,19.00514 -100.71429,29.28572 -13.73469,10.28058 -14.75252,12.88826 -12.14286,20 2.60966,7.11174 6.54527,9.40572 25.71429,8.57142 19.16902,-0.8343 98.57143,-27.62172 98.57143,-21.42857 l -11.42857,-36.42857 z"
- style="display:inline;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- transform="translate(174.03125,-62.156036)" />
- <rect
- y="344.82138"
- x="702.86414"
- height="162.63455"
- width="207.8894"
- id="rect7985-1"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate" />
- </g>
- </g>
- </g>
- <path
- inkscape:connector-curvature="0"
- style="display:inline;overflow:visible;visibility:visible;opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter8802-7);enable-background:accumulate"
- d="M 582.65599,-7.4183011 695.79307,78.848726 804.68752,337.64981 842.87128,545.5392 963.07944,637.46308 c 0,0 -12.72793,-287.08535 -19.799,-313.95541 C 936.20938,296.63761 793.37381,-69.643698 793.37381,-69.643698 L 582.65599,-7.4183011 Z"
- id="path7987-4"
- clip-path="url(#clipPath8604-69)"
- sodipodi:nodetypes="cccccscc"
- transform="translate(276,136)" />
- <path
- inkscape:connector-curvature="0"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:url(#linearGradient6955);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 964.13839,239.599 c 0,0 8.67732,10.89662 24.10715,11.96428 15.42986,1.06766 49.72166,-39.95267 70.17856,-52.14285 20.4793,-12.20353 47.0464,-26.60225 63.9286,-20.35714 16.8821,6.2451 22.1578,26.43609 27.8571,48.03571 5.6994,21.59961 6.7186,61.81389 -2.6785,92.85715 -9.3972,31.04325 -50.5033,73.10375 -65.3572,103.39285 -14.8539,30.2891 -11.6071,39.82143 -11.6071,39.82143"
- id="path7989-9"
- sodipodi:nodetypes="czzzzzzc" />
- <path
- inkscape:connector-curvature="0"
- style="display:inline;opacity:1;fill:url(#radialGradient3315-5);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 1124.4955,207.63471 c -15.8928,-0.89286 -49.7188,12.10583 -66.0714,24.28572 -16.4386,12.2439 -29.2209,24.1144 -29.2857,52.14285 -0.065,28.20604 13.1191,39.07641 29.1071,46.96429 15.988,7.88789 33.6862,7.11928 51.9643,-11.78571 18.2782,-18.905 14.2857,-111.60715 14.2857,-111.60715 z"
- id="path7991-1"
- sodipodi:nodetypes="czzzzc" />
- <ellipse
- ry="73.928574"
- rx="86.428574"
- cy="237.00504"
- cx="385"
- style="display:inline;overflow:visible;visibility:visible;opacity:0.75;fill:url(#radialGradient3543-4);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter4120-7);enable-background:accumulate"
- id="path7993-0"
- transform="matrix(0.9434749,-0.1239943,0.1440089,1.0957669,451.94827,134.5988)"
- clip-path="url(#clipPath4100-3)" />
- <path
- inkscape:connector-curvature="0"
- transform="translate(450.03125,73.843964)"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:url(#radialGradient3915-6);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 527.60588,407.44884 c 0,0 -122.04144,38.40348 -187.51434,9.63181 -65.47289,-28.77166 -74.37725,-124.71847 -74.37725,-124.71847 0,0 73.38158,-80.50393 129.92078,-83.61476 55.82705,-3.07164 90.57386,20.14332 114.87001,65.85171 24.352,45.81348 17.1008,132.84971 17.1008,132.84971 z"
- id="path7995-7"
- sodipodi:nodetypes="csczzc"
- mask="url(#mask3684-3)" />
- <path
- inkscape:connector-curvature="0"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:url(#linearGradient6957);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 772.17411,393.349 c 0,0 36.21754,-27.38247 51.60714,-35.89286 15.17734,-8.39301 25.71428,-11.60714 35.89285,-11.60714 l -15.53571,66.96428"
- id="path7997-5"
- sodipodi:nodetypes="czcc" />
- <circle
- r="36.25"
- cy="306.64789"
- cx="409.28571"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:url(#radialGradient3933-8);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- id="path7999-8"
- transform="translate(449.49554,74.915393)" />
- <path
- inkscape:connector-curvature="0"
- style="display:inline;overflow:visible;visibility:visible;opacity:0.3;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter8806-6);enable-background:accumulate"
- d="m 311.83409,415.43155 9.8995,121.62237 -60.10408,136.47161 15.55635,174.65537 c 15.61326,61.8792 32.18545,98.66905 74.37615,117.05383 4.31911,-36.23998 8.68161,-72.36764 -31.24264,-223.11984 l 17.67767,-69.29647 72.12489,-138.59293 -42.4264,-158.39192 -55.86144,39.59798 z"
- id="path8001-7"
- sodipodi:nodetypes="cccccccccc"
- clip-path="url(#clipPath8616-5)"
- transform="translate(276,136)" />
- <path
- inkscape:connector-curvature="0"
- style="display:inline;overflow:visible;visibility:visible;opacity:0.5;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter8826-9);enable-background:accumulate"
- d="m 635.21025,581.13004 c -14.14214,12.72792 39.23347,34.58015 76.36753,24.04163 37.13406,-10.53852 104.64487,-35.56437 103.23759,-79.19596 -1.40728,-43.63158 -76.36753,-128.69343 -76.36753,-128.69343 L 635.21025,581.13004 Z"
- id="path8003-0"
- sodipodi:nodetypes="czzcc" />
- <circle
- r="23.214285"
- cy="306.64789"
- cx="410"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:url(#radialGradient3991-0);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- id="path8005-4"
- transform="translate(449.67411,74.915393)" />
- <circle
- r="7.5"
- cy="303.07648"
- cx="414.28571"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter3981-7);enable-background:accumulate"
- id="path8007-8"
- transform="translate(451.99554,73.486821)" />
- <path
- inkscape:connector-curvature="0"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:url(#radialGradient4112-7);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 789.31696,478.349 c 0,0 7.02281,19.56859 -1.07143,35 -8.09424,15.43141 -42.32317,38.98822 -67.49999,50 -25.30972,11.06991 -85.473,32.96393 -101.78572,41.96428 -16.46148,9.08243 -18.21428,12.67857 -18.21428,12.67857 0,0 -7.14693,-19.06441 28.74999,-51.7857 36.17211,-32.97214 142.02712,-48.0495 159.82143,-87.85715 z"
- id="path8009-0"
- sodipodi:nodetypes="czzzczc" />
- <g
- style="display:inline;opacity:1;enable-background:new"
- id="g8011-4"
- transform="translate(780.74553,74.55825)">
- <path
- inkscape:connector-curvature="0"
- transform="translate(-329.81481,0)"
- clip-path="url(#clipPath3999-0)"
- sodipodi:nodetypes="czzczzzszc"
- id="path8013-2"
- d="m 179.64286,267.36218 c -22.41044,39.70292 -60.6161,115.78029 -69.28571,149.64286 -8.64721,33.7751 -8.77199,66.41654 -0.35715,86.42858 8.3602,19.88213 26.16398,35.6328 40.71428,41.42856 -0.59638,-14.37587 14.37295,-43.28583 72.85715,-72.5 58.62627,-29.28514 78.38163,-27.13086 103.57142,-47.14286 25.63006,-20.36176 8.20587,-79.64664 3.21429,-93.92857 -4.99158,-14.28193 -1.23663,-3.37974 -1.94602,-5.09301 -10.68928,-25.81592 -34.21432,-54.4303 -64.48255,-64.54984 -30.26823,-10.11954 -65.01776,-4.84837 -84.28571,5.71428 z"
- style="display:inline;opacity:1;fill:url(#radialGradient3585-2);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
- <ellipse
- ry="134.00607"
- rx="64.715881"
- cy="338.07648"
- cx="183.57143"
- transform="matrix(0.8823874,0.4705236,-0.4705236,0.8823874,-166.62245,2.387362)"
- id="path8015-9"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:url(#radialGradient4060-5);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate" />
- <ellipse
- ry="134.00607"
- rx="64.715881"
- cy="338.07648"
- cx="183.57143"
- transform="matrix(0.8823874,0.4705236,-0.4705236,0.8823874,-162.19388,-18.755495)"
- id="path8017-6"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:url(#radialGradient4062-9);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate" />
- <path
- inkscape:connector-curvature="0"
- transform="translate(-329.81481,3e-7)"
- clip-path="url(#clipPath3999-0)"
- sodipodi:nodetypes="czzczzzszc"
- id="path8019-1"
- d="m 179.64286,267.36218 c -22.41044,39.70292 -60.6161,115.78029 -69.28571,149.64286 -8.64721,33.7751 -8.77199,66.41654 -0.35715,86.42858 8.3602,19.88213 26.16398,35.6328 40.71428,41.42856 -0.59638,-14.37587 14.37295,-43.28583 72.85715,-72.5 58.62627,-29.28514 78.38163,-27.13086 103.57142,-47.14286 25.63006,-20.36176 8.20587,-79.64664 3.21429,-93.92857 -4.99158,-14.28193 -1.23663,-3.37974 -1.94602,-5.09301 -10.68928,-25.81592 -34.21432,-54.4303 -64.48255,-64.54984 -30.26823,-10.11954 -65.01776,-4.84837 -84.28571,5.71428 z"
- style="display:inline;opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient6959);stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;filter:url(#filter4079-1);enable-background:new" />
- </g>
- <circle
- r="19.704132"
- cy="398.07648"
- cx="310.71429"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- id="path8021-0"
- transform="translate(452.55663,72.581273)" />
- <circle
- r="19.704132"
- cy="398.07648"
- cx="310.71429"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:url(#radialGradient4056-5);fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient6961);stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter4083-9);enable-background:accumulate"
- id="path8023-4"
- transform="translate(450.55663,72.581273)" />
- <circle
- r="19.704132"
- cy="398.07648"
- cx="310.71429"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:url(#radialGradient4119-7);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- id="path8025-2"
- transform="translate(450.55663,72.581273)" />
- <ellipse
- ry="44.547726"
- rx="72.079735"
- cy="377.42877"
- cx="429.56738"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:url(#radialGradient4868-3);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.99999994px;stroke-linecap:butt;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter4002-6);enable-background:accumulate"
- id="path8027-2"
- transform="matrix(0.9969564,-0.07796167,0.07796167,0.9969564,436.61877,125.29509)"
- inkscape:transform-center-x="-47.231976"
- inkscape:transform-center-y="-3.6935079" />
- <ellipse
- ry="22.627417"
- rx="36.611931"
- cy="391.21735"
- cx="437.6991"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:url(#radialGradient4876-9);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.99999994px;stroke-linecap:butt;stroke-linejoin:bevel;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter4010-1);enable-background:accumulate"
- id="path8029-2"
- transform="matrix(1.4357951,-0.06999104,0.06999104,1.4357951,235.18065,-63.86546)"
- inkscape:transform-center-x="-20.955902"
- inkscape:transform-center-y="-13.056625" />
- <g
- transform="translate(450.03125,73.843964)"
- id="g8031-0"
- style="display:inline;opacity:1;filter:url(#filter4053-9);enable-background:new">
- <circle
- r="3.2142856"
- cy="401.82648"
- cx="413.66071"
- id="path8033-5"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient6963);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate" />
- <circle
- r="3.2142856"
- cy="401.82648"
- cx="413.66071"
- transform="translate(13.125009,8.1249913)"
- id="path8035-5"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient6965);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate" />
- <circle
- r="3.2142856"
- cy="401.82648"
- cx="413.66071"
- transform="translate(32.946437,7.4999913)"
- id="path8037-2"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient6967);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate" />
- <circle
- r="3.2142856"
- cy="401.82648"
- cx="413.66071"
- transform="translate(24.910723,-10.267866)"
- id="path8039-9"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient6969);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate" />
- <circle
- r="3.2142856"
- cy="401.82648"
- cx="413.66071"
- transform="translate(47.589294,-0.6250087)"
- id="path8041-0"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient6971);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate" />
- </g>
- <path
- inkscape:connector-curvature="0"
- style="display:inline;opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 896.20301,482.92837 c 0.98509,4.35008 4.53707,6.17948 7.38673,7.89182 4.46068,2.51292 6.52016,1.52211 9.15451,-0.75761 1.60195,-1.92117 10.68311,-4.69865 15.59423,-7.07107 4.32961,-1.45891 8.9033,-5.35873 13.38452,-8.33376 3.39514,-1.62724 5.34664,0.35464 7.82868,1.01015 2.94412,0.71661 4.41117,2.17175 6.06092,3.53554 2.39616,1.17519 -0.9279,3.14313 3.283,4.29314 1.19091,0.21794 2.41695,0.57645 3.28299,-0.50507"
- id="path8043-2"
- sodipodi:nodetypes="ccccccccc" />
- <path
- inkscape:connector-curvature="0"
- style="display:inline;opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 910.85021,475.35223 c 2.31494,-0.032 3.17778,0.64253 5.49271,-0.82075 3.45564,-3.08113 5.40254,-3.14477 7.95495,-4.41942 3.02657,-1.31523 6.5357,8.15169 10.10153,9.84899 2.39509,-0.82142 1.28914,1.79379 1.45209,2.65165 0.0571,2.64684 2.80694,3.67806 4.35628,5.42957 3.31604,2.25549 7.37523,6.29546 11.11168,5.3033 6.44525,-2.93107 10.27922,-1.28146 16.28871,-7.38674 0.70405,-1.18134 -0.58425,-6.8946 3.09359,-7.19734 2.52399,0.25338 4.16667,0.0502 6.06092,0.56822 5.441,2.11719 7.73778,6.45 14.71034,7.95495 6.1829,0.96639 7.61264,3.79426 13.88959,5.05076"
- id="path8045-8"
- sodipodi:nodetypes="cccccccccccc" />
- <path
- inkscape:connector-curvature="0"
- style="display:inline;opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 876.98133,483.52197 c 2.39858,-0.7938 6.10613,4.1921 8.17313,7.04568 0.59281,2.67952 1.15377,5.48645 0.75761,12.12183 0.78513,2.41754 2.68049,3.03095 4.79823,3.283 3.11745,-0.53678 5.87669,-1.3243 7.3236,-3.03046 1.8716,-1.94167 5.31253,2.39394 8.08122,4.04061 3.61009,1.91209 7.77378,1.97886 11.8693,2.27284 1.70358,-0.23064 2.3704,4.51515 3.28299,8.08123 0.38414,4.37806 -0.88544,6.89569 -1.76776,9.84898 -0.2943,2.49655 2.9885,3.52974 6.31345,4.54569 3.18244,0.74124 6.54424,1.66184 9.09137,1.76777 5.14186,0.87491 8.08874,2.69052 12.12183,4.04061 2.23914,0.81655 3.26019,2.24216 4.54569,3.53553"
- id="path8047-3"
- sodipodi:nodetypes="ccccccccccccc" />
- <path
- inkscape:connector-curvature="0"
- style="display:inline;opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter8814-5);enable-background:new"
- d="m 332,187.69519 c 0,0 57.5,-25.5 57.5,-28 0,-2.5 5.5,-52 5.5,-52 0,0 91,-48.500001 91.5,-50.500001 0.5,-2 86,-62.0000004 86,-62.0000004 L 386.5,17.195189 311,123.19519 l 21,64.5 z"
- id="path8049-8"
- clip-path="url(#clipPath8514-8)"
- transform="translate(276,136)" />
- <path
- inkscape:connector-curvature="0"
- style="display:inline;overflow:visible;visibility:visible;opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 1697.2846,722.5514 c 0,0 -115.9655,73.5391 -123.0365,77.78174 -7.0711,4.24264 -230.5169,137.17872 -230.5169,137.17872 l 4.2427,39.59798 216.3747,-100.40917 117.3797,-101.82337 15.5563,-52.3259 z"
- id="path8051-0" />
- <path
- inkscape:connector-curvature="0"
- style="display:inline;overflow:visible;visibility:visible;opacity:0.5;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter8810-3);enable-background:accumulate"
- d="m 528.91587,556.85291 c -5.65685,-1.41421 -181.01933,74.95332 -181.01933,74.95332 l -33.94113,181.01934 51.09546,193.94823 257.2031,67.6813 c 0,0 206.47518,152.735 212.13203,148.4924 5.65686,-4.2426 168.2914,-193.7473 168.2914,-193.7473 L 842.87128,845.35248 796.20224,667.16157 528.91587,556.85291 Z"
- id="path8053-4"
- clip-path="url(#clipPath8610-9)"
- sodipodi:nodetypes="cccccscccc"
- transform="translate(276,136)" />
- <path
- inkscape:connector-curvature="0"
- style="display:inline;opacity:1;fill:#0c0c0c;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 1097.6433,613.88997 c 0,0 22.6195,-6.50681 35.7427,-5.87273 13.1233,0.63409 30.6416,1.93862 43.7089,12.18619 13.0673,10.24756 25.0677,27.14007 34.1124,58.36965 9.0446,31.22958 1.6983,99.25201 -6.1761,143.34735 -7.8743,44.09534 -28.2651,106.11298 -45,140 -16.7348,33.88702 -49.7977,77.49517 -60.5694,89.87617 -11.3642,13.062 -56.2059,36.4262 -79.4306,42.2667 5.3034,-10.6066 48.8998,-50.5889 35,-60.7143 -14.0189,-10.2123 -45.76,45.9824 -84.2931,29.0332 21.38231,-13.1321 41.7794,-51.1861 34.0406,-66.59448 -7.84024,-15.61039 -30.70492,48.75758 -93.53553,37.01288 30.05204,-27.5267 55.40706,-70.90401 41.2627,-82.9797 -14.41516,-12.30687 -60.46175,54.2932 -60.46175,54.2932 0,0 -2.8219,-41.70123 13.7732,-68.60737 16.63935,-26.97787 79.65297,-81.61527 99.55308,-111.70342 19.9002,-30.08814 33.6126,-66.00902 42.1355,-92.51794 8.5228,-26.50892 15.8009,-77.09954 15.8009,-77.09954"
- id="path8055-0"
- sodipodi:nodetypes="czzzzzzczczczczzzc" />
- <path
- inkscape:connector-curvature="0"
- style="display:inline;overflow:visible;visibility:visible;opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter8818-1);enable-background:accumulate"
- d="m 770.74639,609.17881 -50.91169,97.58074 -79.90307,111.01576 34.64824,71.41778 42.42641,79.19597 72.12489,-45.25484 14.14214,-192.33305 21.2132,-138.59292 -14.14214,-90.15612 -39.59798,107.12668 z"
- id="path8057-9"
- clip-path="url(#clipPath8622-5)"
- sodipodi:nodetypes="cccccccccc"
- transform="translate(276,136)" />
- <path
- inkscape:connector-curvature="0"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter8810-3);enable-background:accumulate"
- d="m 295,846.19519 6.64488,-68.92285 c 0,0 90.31951,89.00457 162.35512,122.92285 72.03561,33.91828 308,62 308,62 l 154,-26 -36,162.00001 -286,26 -298,-89 -11,-189.00001 z"
- id="path8059-1"
- clip-path="url(#clipPath8906-9)"
- sodipodi:nodetypes="cczcccccc"
- transform="translate(276,136)" />
- <path
- inkscape:connector-curvature="0"
- transform="translate(450.03125,73.843964)"
- style="display:inline;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter3587-1);enable-background:new"
- d="m 405.79629,845.99023 74.95332,65.05383 2.49963,16.8804 19.40336,10.15891 6.49204,23.05109 31.70905,-8.3711 14.84924,48.08324 c 12.25652,12.7279 89.79344,-113.1097 55.86143,38.1838 l -60.81118,16.2635 -89.20292,-94.69286 -62.82503,-53.79963 7.07106,-60.81118 z"
- id="path8061-9"
- sodipodi:nodetypes="cccccccccccc"
- clip-path="url(#clipPath3602-4)" />
- <path
- inkscape:connector-curvature="0"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate"
- d="m 1159.317,918.349 c 54.2857,-1.42857 126.035,-15.05199 170,-26.78572 44.0527,-11.75714 125.8863,-36.34724 175.357,-57.85714 49.3393,-21.45272 113.6038,-59.2816 154.2859,-92.14285 40.5081,-32.72069 52.3899,-55.81981 60.7142,-33.57143 8.3691,22.36779 -16.4069,56.32562 -37.8571,81.07143 -21.6042,24.9234 -52.7314,52.70533 -98.9287,89.28571 -46.1973,36.58038 -156.0825,101.58463 -212.8571,128.5714 -57.066,27.1254 -128.2033,58.2385 -172.1428,72.5001 -43.9395,14.2616 -131.4286,31.0714 -131.4286,31.0714 L 1159.317,918.349 Z"
- id="path8063-6"
- sodipodi:nodetypes="czzzzzzzzcc" />
- <path
- inkscape:connector-curvature="0"
- transform="translate(450.03125,73.843964)"
- style="display:inline;overflow:visible;visibility:visible;opacity:0.5;fill:url(#linearGradient6973);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter3779-4);enable-background:accumulate"
- d="m 1241.5965,652.95007 c 0,0 -64.7215,54.33706 -145.6639,98.99494 -82.0244,45.25484 -284.25704,93.3381 -284.25704,93.3381 0,0 -15.10137,21.05196 45.25489,28.28428 60.35626,7.23232 224.08195,-53.30069 278.60015,-96.16654 54.5182,-42.86585 120.2081,-111.72286 120.2081,-111.72286 l -14.1422,-12.72792 z"
- id="path8065-2"
- sodipodi:nodetypes="czczzcc"
- clip-path="url(#clipPath3992-4)" />
- <g
- transform="translate(450.03125,73.843964)"
- style="display:inline;opacity:1;enable-background:new"
- id="g8067-5"
- clip-path="url(#clipPath3986-7)">
- <g
- transform="translate(-174.03125,62.156036)"
- style="filter:url(#filter3677-5)"
- id="g8069-4">
- <g
- style="filter:url(#filter3785-4)"
- id="g8071-4">
- <path
- inkscape:connector-curvature="0"
- sodipodi:nodetypes="czzccccc"
- id="path8073-9"
- d="m 1094.2857,725.93361 c 0,0 -0.2961,26.16091 4.6428,37.85715 4.9389,11.69624 20.0381,26.48665 28.5715,31.42857 8.5334,4.94192 18.9286,8.57142 18.9286,8.57142 l 117.8571,-115 17.8572,-75.71428 -96.4286,38.57143 -91.4286,74.28571 z"
- style="display:inline;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- transform="translate(174.03125,-62.156036)" />
- <rect
- y="486.14224"
- x="1197.8389"
- height="309.71277"
- width="333.75412"
- id="rect8075-9"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate" />
- </g>
- </g>
- <g
- transform="translate(-174.03125,62.156036)"
- style="display:inline;opacity:0.18000004;enable-background:new"
- id="g8077-3">
- <g
- style="filter:url(#filter3785-4)"
- id="g8079-6">
- <path
- inkscape:connector-curvature="0"
- sodipodi:nodetypes="czzccccc"
- id="path8081-0"
- d="m 1094.2857,725.93361 c 0,0 -0.2961,26.16091 4.6428,37.85715 4.9389,11.69624 20.0381,26.48665 28.5715,31.42857 8.5334,4.94192 18.9286,8.57142 18.9286,8.57142 l 117.8571,-115 17.8572,-75.71428 -96.4286,38.57143 -91.4286,74.28571 z"
- style="display:inline;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- transform="translate(174.03125,-62.156036)" />
- <rect
- y="486.14224"
- x="1197.8389"
- height="309.71277"
- width="333.75412"
- id="rect8083-5"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate" />
- </g>
- </g>
- </g>
- <path
- inkscape:connector-curvature="0"
- transform="translate(450.03125,73.843964)"
- style="display:inline;overflow:visible;visibility:visible;opacity:0.83300003;fill:#050505;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:15;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;filter:url(#filter8225-7);enable-background:accumulate"
- d="m 1264.1875,605 c -4.4911,0.73268 -8.157,3.45509 -11.9375,6.40625 -10.0813,7.86976 -28.1695,34.42524 -48.0312,50.46875 -39.8674,32.20316 -103.996,69.97701 -152.5626,91.09375 -48.614,21.13738 -130.54122,45.81801 -174.31245,57.5 -43.39821,11.58246 -115.04403,25.13107 -168.25,26.53125 l -4.5625,0.125 -2,4.125 -92.84375,192.125 -6.5,13.4688 14.65625,-2.8438 c 0,0 87.26968,-16.6514 132.34375,-31.2812 44.7252,-14.51667 115.79086,-45.66683 173.03125,-72.87505 C 980.82199,912.46306 1090.1551,847.86412 1137.5,810.375 c 46.3608,-36.70982 77.8049,-64.71682 99.9375,-90.25 10.9011,-12.576 22.7448,-27.53144 31.0313,-42.75 8.2864,-15.21856 19.1597,-44.21808 13.6874,-58.84375 -1.2177,-3.25474 -2.5514,-6.0613 -4.5937,-8.5 -2.0423,-2.4387 -8.4747,-1.57199 -8.5625,-5.03125 -0.2098,-8.26482 -3.3155,-0.24423 -4.8125,0 z m 2.1563,15.21875 c 0.4148,0.58574 1.0311,1.55766 1.7812,3.5625 2.8968,7.74213 -1.4407,31.89875 -8.8125,45.4375 -7.3718,13.53875 -22.6384,28.92394 -33.1875,41.09375 -21.0754,24.31356 -51.9037,51.86156 -97.9375,88.3125 -45.0496,35.67159 -155.46033,101.09459 -211.40625,127.6875 -56.89173,27.04249 -128.09616,58.1184 -171.25,72.125 -36.36491,11.8031 -95.84471,23.8338 -115.71875,27.7813 L 714.09375,851.75 c 54.70691,-2.0493 123.79259,-15.21635 167.125,-26.78125 44.33422,-11.83225 126.07865,-36.33633 176.40625,-58.21875 50.112,-21.78871 112.5344,-61.16816 154.0312,-94.6875 20.6464,-16.67721 41.7449,-42.54588 49.8126,-48.84375 2.437,-1.90242 4.0806,-2.6358 4.875,-3 z"
- id="path8085-0"
- clip-path="url(#clipPath3722-3)"
- sodipodi:nodetypes="cssssccccccssssssssccssssssccssssc" />
- <g
- style="display:inline;opacity:1;enable-background:new"
- id="g8087-2"
- mask="url(#mask7704-9)"
- transform="matrix(0.9934486,0.1142802,-0.1142802,0.9934486,-9.24324,588.09054)"
- inkscape:transform-center-x="-185.09603"
- inkscape:transform-center-y="-12.859654">
- <path
- inkscape:connector-curvature="0"
- transform="translate(0.08004571,-0.03125)"
- style="display:inline;fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 1111.4062,-285.9375 -3.9374,1.875 c -0.041,0.0102 -0.1,0.0205 -0.125,0.0312 -0.4188,0.21285 -0.1647,0.10058 -0.6563,0.3125 -0.4861,0.20956 -1.7376,0.58419 -4.0937,1.46875 -3.3312,1.25058 -5.8043,2.14984 -7,3.0625 -1.5362,0.0213 -3.7205,0.23331 -5.6563,0.71875 -2.9815,0.74767 -4.8552,1.17401 -6.75,1.59375 -1.8948,0.41973 -1.6755,0.64219 -2.875,0.875 -1.2966,0.25167 -1.7214,-0.009 -5.4375,0.78125 -3.4899,0.74215 -8.8948,1.93107 -10.1562,2.6875 -1.584,-0.18078 -3.8675,-0.32178 -5.8438,-0.0312 -3.0404,0.44696 -4.9162,0.67276 -6.8438,0.90625 -0.6554,0.0794 -1.041,0.20078 -1.3437,0.28125 -0.4262,0.13166 -0.6858,0.26002 -1.375,0.34375 -1.3116,0.15937 -1.7622,-0.15683 -5.5313,0.28125 -3.5539,0.41309 -9.0054,1.27282 -10.25,1.9375 -1.599,-0.29729 -3.8577,-0.53419 -5.8437,-0.34375 -3.0588,0.29332 -4.972,0.48399 -6.9063,0.65625 -1.9342,0.17227 -1.6886,0.42237 -2.9062,0.53125 -1.3162,0.1177 -1.7598,-0.16363 -5.5312,0.25 -3.5421,0.38845 -9.0079,1.20927 -10.2813,1.875 -1.5989,-0.29469 -3.8872,-0.50701 -5.875,-0.3125 -3.05829,0.29925 -4.9412,0.48024 -6.875,0.65625 -0.65749,0.0598 -1.04005,0.17856 -1.34375,0.25 -0.4277,0.11896 -0.6835,0.21807 -1.375,0.28125 -1.316,0.12026 -1.75975,-0.19488 -5.53125,0.21875 -3.55619,0.39002 -9.0056,1.23916 -10.25,1.90625 -1.59869,-0.29418 -3.85985,-0.52372 -5.84375,-0.3125 -3.0557,0.32533 -4.97405,0.52624 -6.90625,0.71875 -1.93219,0.19251 -1.68975,0.44088 -2.90625,0.5625 -1.31488,0.13147 -1.76305,-0.16454 -5.53125,0.28125 -3.53889,0.41866 -8.9777,1.29217 -10.25,1.96875 -1.59759,-0.28104 -3.85995,-0.42043 -5.84375,-0.1875 -3.05198,0.35837 -4.945,0.56786 -6.875,0.78125 -0.65618,0.0726 -1.04065,0.17269 -1.34375,0.25 -0.42679,0.12723 -0.6849,0.2672 -1.375,0.34375 -1.31339,0.14569 -1.76735,-0.17402 -5.53125,0.3125 -3.54888,0.45876 -8.97865,1.41902 -10.21875,2.125 -1.59309,-0.24424 -3.8338,-0.38135 -5.8125,-0.125 -3.04759,0.39482 -4.9507,0.64845 -6.875,0.90625 -1.92429,0.25779 -1.7261,0.49353 -2.9375,0.65625 -1.30949,0.1759 -1.7472,-0.10438 -5.5,0.46875 -3.52429,0.53824 -8.9232,1.69917 -10.1875,2.4375 -1.58749,-0.20354 -3.8455,-0.25473 -5.8125,0.0937 -3.02619,0.53612 -4.8989,0.86169 -6.8125,1.1875 -0.65059,0.11077 -1.0137,0.27094 -1.3125,0.375 -0.42069,0.16488 -0.66345,0.3313 -1.34375,0.46875 -1.2947,0.26159 -1.7271,-0.006 -5.4375,0.8125 -3.49848,0.77195 -8.8459,2.38293 -10.0625,3.21875 -1.5629,-0.0774 -3.7575,0.0853 -5.6875,0.59375 -2.97238,0.78313 -4.8177,1.23209 -6.6875,1.75 -1.87,0.5179 -1.66665,0.76728 -2.84375,1.09375 -1.27249,0.3529 -1.69705,0.10709 -5.34375,1.1875 -3.42468,1.01463 -8.6494,2.93317 -9.875,3.84375 -1.53878,0.0127 -3.7198,0.27222 -5.625,0.875 -2.93098,0.92734 -4.75035,1.45842 -6.59375,2.0625 -0.62679,0.20538 -0.99165,0.39258 -1.28125,0.53125 -0.40758,0.21361 -0.6533,0.40875 -1.3125,0.625 -1.2545,0.41154 -1.68615,0.18904 -5.28125,1.4375 -3.38989,1.17717 -8.59495,3.2137 -9.78125,4.15625 -1.52388,0.0597 -3.65005,0.39487 -5.53125,1.0625 -2.89739,1.02829 -4.69905,1.67548 -6.53125,2.3125 -1.8322,0.63701 -1.62785,0.84854 -2.78125,1.25 -1.24679,0.43396 -1.66355,0.19972 -5.21875,1.5625 -3.3387,1.2798 -8.4871,3.48255 -9.6875,4.46875 -1.50718,0.10769 -3.6357,0.4988 -5.5,1.21875 -2.86818,1.1076 -4.6239,1.78156 -6.4375,2.46875 -0.6167,0.23363 -0.99645,0.44203 -1.28125,0.59375 10e-6,0 0,0.0295 0,0.0312 l -8,3.1875 -12.4759,3.49189 7.92966,19.27772 c -0.59163,1.97357 12.54624,-4.73836 12.54624,-4.73836 0.22641,-0.14468 0.44895,-0.27261 0.71875,-0.375 1.08052,-0.40998 2.1716,-0.21577 6,-1.6875 3.82852,-1.47174 5.22405,-2.00498 5.90625,-2.40625 0.67961,-0.39978 1.61175,-0.87937 2.21875,-1.53125 1.82692,-0.13775 3.5708,-0.49323 4.9375,-1 2.968,-1.10052 4.87535,-1.80619 6.78125,-2.46875 1.90581,-0.66254 2.35415,-1.41487 3.40625,-1.78125 1.09162,-0.38011 2.1951,-0.16538 6.0625,-1.53125 3.8674,-1.36586 5.28315,-1.82708 5.96875,-2.21875 0.70111,-0.40052 1.7008,-0.93298 2.3125,-1.59375 1.97081,-0.0547 3.81695,-0.38463 5.28125,-0.875 3.00152,-1.00508 4.92615,-1.62171 6.84375,-2.25 1.53861,-0.5041 2.17415,-1.04677 2.90625,-1.4375 0.23022,-0.13431 0.4759,-0.25373 0.75,-0.34375 1.09832,-0.36048 2.18145,-0.0814 6.09375,-1.3125 3.91231,-1.23113 5.366,-1.67295 6.0625,-2.03125 0.69391,-0.35697 1.6301,-0.79261 2.25,-1.40625 1.86521,-0.0227 3.63585,-0.26683 5.03125,-0.6875 3.0304,-0.91354 4.9924,-1.4301 6.9375,-1.96875 1.94512,-0.53864 2.4262,-1.26452 3.5,-1.5625 1.11402,-0.30915 2.22,0.007 6.1875,-1.03125 3.9675,-1.03863 5.4175,-1.43273 6.125,-1.75 0.7348,-0.32959 1.8139,-0.75372 2.4375,-1.375 1.99782,0.116 3.85745,-0.0201 5.34375,-0.375 3.07811,-0.735 5.0834,-1.10094 7.0625,-1.5 1.58791,-0.32018 2.2443,-0.79055 3,-1.09375 0.23751,-0.1068 0.4669,-0.19276 0.75,-0.25 1.13341,-0.22919 2.30465,0.20893 6.34375,-0.5 4.03942,-0.70893 5.50025,-0.92709 6.21875,-1.1875 0.71581,-0.25944 1.70435,-0.56724 2.34375,-1.09375 1.9242,0.23949 3.7479,0.22453 5.1875,0 3.12642,-0.48762 5.15455,-0.70067 7.15625,-0.96875 2.00171,-0.26807 2.48875,-0.94514 3.59375,-1.09375 1.14642,-0.15418 2.27585,0.30157 6.34375,-0.21875 4.06781,-0.52032 5.56025,-0.69573 6.28125,-0.9375 0.73712,-0.24714 1.7981,-0.58623 2.4375,-1.125 2.05,0.33553 3.9737,0.39796 5.5,0.21875 3.1422,-0.36896 5.18,-0.55936 7.1875,-0.78125 1.61082,-0.17802 2.26465,-0.6082 3.03125,-0.84375 0.24091,-0.0855 0.49405,-0.1556 0.78125,-0.1875 1.1497,-0.12772 2.3013,0.34665 6.375,-0.125 4.0737,-0.47165 5.55905,-0.6106 6.28125,-0.84375 0.71941,-0.23227 1.70025,-0.47346 2.34375,-0.96875 1.9363,0.33346 3.77005,0.40424 5.21875,0.25 3.14601,-0.33495 5.1775,-0.51859 7.1875,-0.71875 2.00991,-0.20014 2.48415,-0.82639 3.59375,-0.9375 1.1511,-0.11528 2.2965,0.36506 6.375,-0.0625 4.0785,-0.42756 5.5889,-0.56209 6.3125,-0.78125 0.73922,-0.22386 1.7956,-0.51325 2.4375,-1.03125 2.057,0.39867 4.00185,0.4934 5.53125,0.34375 3.14871,-0.3081 5.1758,-0.47325 7.1875,-0.65625 1.61401,-0.14682 2.26305,-0.56055 3.03125,-0.78125 0.2413,-0.0809 0.49355,-0.12991 0.78125,-0.15625 1.15211,-0.10545 2.2929,0.39275 6.375,0 4.08211,-0.39275 5.5889,-0.53084 6.3125,-0.75 0.7209,-0.21833 1.6996,-0.4477 2.3437,-0.9375 1.9381,0.34999 3.7689,0.45438 5.2188,0.3125 3.1487,-0.3081 5.1758,-0.47325 7.1875,-0.65625 2.0116,-0.18299 2.5142,-0.83802 3.625,-0.9375 1.1523,-0.10323 2.2922,0.38483 6.375,0 4.0829,-0.38482 5.5887,-0.501 6.3125,-0.71875 0.7393,-0.22243 1.7956,-0.51449 2.4375,-1.03125 2.0574,0.40177 4.0029,0.50333 5.5313,0.34375 3.1465,-0.32852 5.177,-0.5227 7.1874,-0.71875 1.613,-0.15729 2.2657,-0.63148 3.0313,-0.875 0.2407,-0.088 0.4632,-0.12137 0.75,-0.15625 1.1483,-0.1397 2.3167,0.33991 6.375,-0.25 4.0583,-0.58992 5.5618,-0.77714 6.2813,-1.03125 0.7166,-0.25316 1.6746,-0.55807 2.3124,-1.09375 1.9197,0.21194 3.72,0.15141 5.1563,-0.0937 3.1191,-0.5324 5.1116,-0.92861 7.0937,-1.3125 1.9821,-0.38387 2.4743,-1.03965 3.5626,-1.28125 1.1287,-0.25066 2.2702,0.11629 6.25,-0.875 3.9795,-0.99127 5.4295,-1.4193 6.125,-1.78125 0.7222,-0.376 1.7617,-0.87058 2.375,-1.53125 1.9629,-0.012 3.7937,-0.29105 5.2187,-0.84375 2.9512,-1.1446 4.8732,-1.86942 6.6875,-2.75 1.4557,-0.70652 2.3191,-1.70203 2.5312,-2 0.2123,-0.29795 0.099,-0.72855 0.125,-0.75 0.043,-0.0352 0.3404,-0.094 0.5,-0.4375 0.859,-1.84707 2.3232,-5.62764 2.4376,-6.3125 0.1137,-0.68214 0.168,-1.35277 0.2187,-1.75 0.029,-0.2295 -0.1471,-0.8789 -0.125,-0.9375 0.031,-0.082 0.2883,-0.25057 0.3437,-0.5 0.2663,-1.19831 0.089,-2.20736 -0.125,-3.625 -0.2139,-1.41763 -0.9716,-4.61463 -1.625,-5.46875 -0.6589,-0.86172 -1.2248,-1.01051 -1.75,-1 z"
- id="path8089-9"
- sodipodi:nodetypes="ccssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssscccccssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssssssssc" />
- <g
- clip-path="url(#clipPath7421-7)"
- id="g8091-4">
- <path
- inkscape:connector-curvature="0"
- id="path8093-3"
- d="m 1107.409,-284.04961 c -0.4187,0.21283 -0.1556,0.0939 -0.6472,0.30581 -0.4861,0.20954 -1.7234,0.57439 -4.0796,1.45895 -3.3311,1.25057 -5.8302,2.15344 -7.0259,3.0661 -1.5361,0.0213 -3.7205,0.23331 -5.6563,0.71875 -2.9815,0.74766 -4.8552,1.17401 -6.75,1.59375 -1.8948,0.41972 -1.6755,0.64219 -2.875,0.875 -1.2966,0.25166 -1.7214,-0.009 -5.4375,0.78125 -3.4899,0.74214 -8.8948,1.93107 -10.1562,2.6875 -1.5839,-0.18079 -3.8675,-0.32178 -5.8438,-0.0312 -3.0404,0.44695 -4.9162,0.67276 -6.8437,0.90625 -0.6554,0.0794 -1.0411,0.20078 -1.3438,0.28125 -0.4262,0.13165 -0.6858,0.26002 -1.375,0.34375 -1.3116,0.15936 -1.7622,-0.15683 -5.5312,0.28125 -3.5539,0.41308 -9.0054,1.27282 -10.25,1.9375 -1.599,-0.2973 -3.8578,-0.53419 -5.8438,-0.34375 -3.0588,0.29331 -4.972,0.48399 -6.9062,0.65625 -1.9343,0.17226 -1.6887,0.42237 -2.9063,0.53125 -1.3162,0.11769 -1.7598,-0.16363 -5.5312,0.25 -3.5419,0.38844 -9.0079,1.20927 -10.2813,1.875 -1.5989,-0.2947 -3.88717,-0.50701 -5.875,-0.3125 -3.05824,0.29924 -4.94113,0.48024 -6.875,0.65625 -0.65749,0.0598 -1.04004,0.17856 -1.34375,0.25 -0.42765,0.11895 -0.68351,0.21807 -1.375,0.28125 -1.31596,0.12025 -1.75976,-0.19488 -5.53125,0.21875 -3.55614,0.39001 -9.00554,1.23916 -10.25,1.90625 -1.59863,-0.29419 -3.85984,-0.52372 -5.84375,-0.3125 -3.0556,0.32532 -4.97404,0.52624 -6.90625,0.71875 -1.93221,0.1925 -1.68987,0.44088 -2.90625,0.5625 -1.31488,0.13146 -1.76298,-0.16454 -5.53125,0.28125 -3.53887,0.41865 -8.97768,1.29217 -10.25,1.96875 -1.59755,-0.28105 -3.85996,-0.42043 -5.84375,-0.1875 -3.05198,0.35836 -4.94508,0.56786 -6.875,0.78125 -0.6562,0.0725 -1.04066,0.17269 -1.34375,0.25 -0.42677,0.12722 -0.68491,0.2672 -1.375,0.34375 -1.31333,0.14568 -1.76746,-0.17402 -5.53125,0.3125 -3.54889,0.45875 -8.97863,1.41902 -10.21875,2.125 -1.59305,-0.24424 -3.83381,-0.38135 -5.8125,-0.125 -3.04759,0.39481 -4.95071,0.64845 -6.875,0.90625 -1.92428,0.25779 -1.72611,0.49353 -2.9375,0.65625 -1.30946,0.1759 -1.74719,-0.10438 -5.5,0.46875 -3.52429,0.53824 -8.92315,1.69917 -10.1875,2.4375 -1.5875,-0.20354 -3.8455,-0.25473 -5.8125,0.0937 -3.02617,0.53612 -4.89889,0.86169 -6.8125,1.1875 -0.65061,0.11077 -1.01371,0.27094 -1.3125,0.375 -0.42067,0.16488 -0.66345,0.3313 -1.34375,0.46875 -1.29465,0.26159 -1.72712,-0.006 -5.4375,0.8125 -3.49853,0.77195 -8.84595,2.38293 -10.0625,3.21875 -1.56278,-0.0774 -3.75758,0.0853 -5.6875,0.59375 -2.97244,0.78313 -4.81761,1.23209 -6.6875,1.75 -1.86988,0.5179 -1.6666,0.76728 -2.84375,1.09375 -1.27246,0.3529 -1.69703,0.10709 -5.34375,1.1875 -3.4247,1.01463 -8.64944,2.93317 -9.875,3.84375 -1.53883,0.0127 -3.71983,0.27222 -5.625,0.875 -2.93106,0.92734 -4.75031,1.45842 -6.59375,2.0625 -0.62676,0.20538 -0.99173,0.39258 -1.28125,0.53125 -0.40763,0.21361 -0.65334,0.40875 -1.3125,0.625 -1.25446,0.41154 -1.68611,0.18904 -5.28125,1.4375 -3.38985,1.17717 -8.59498,3.2137 -9.78125,4.15625 -1.52389,0.0597 -3.65005,0.39487 -5.53125,1.0625 -2.89739,1.02829 -4.69908,1.67548 -6.53125,2.3125 -1.83217,0.63701 -1.62785,0.84854 -2.78125,1.25 -1.24678,0.43396 -1.66361,0.19972 -5.21875,1.5625 -3.33867,1.2798 -8.48715,3.48255 -9.6875,4.46875 -1.50718,0.10769 -3.63569,0.4988 -5.5,1.21875 -2.86818,1.1076 -4.6238,1.78156 -6.4375,2.46875 -0.61666,0.23363 -0.99641,0.44203 -1.28125,0.59375 0,0 0,1.09375 0,1.09375 0.11178,-0.22236 0.38599,-0.81743 0.90625,-1.09375 0.69797,-0.37072 4.81363,-1.99337 6.8125,-2.71875 1.65686,-0.60125 4.15389,-1.32868 5.96875,-1.3125 0.30162,0.003 0.58762,0.0509 0.84375,0.0937 1.84249,0.30825 7.46875,1.5625 7.46875,1.5625 -10e-6,0 -6.23349,-1.64675 -7.03125,-1.84375 -0.19079,-0.0471 -0.53572,-0.0687 -0.96875,-0.0625 1.14546,-0.86971 4.761,-2.39351 7.34375,-3.4375 2.83822,-1.14727 3.11681,-1.25182 5.0625,-1.65625 2.0083,-0.41744 3.15625,-0.5 3.15625,-0.5 0,10e-6 -0.0824,-0.60114 0.96875,-1.125 0.7051,-0.35141 4.88702,-1.8924 6.90625,-2.5625 1.9519,-0.64773 5.0574,-1.3585 6.875,-1 1.86323,0.3675 7.53125,1.8125 7.53125,1.8125 10e-6,0 -6.287,-1.87111 -7.09375,-2.09375 -0.19292,-0.0532 -0.53084,-0.086 -0.96875,-0.0937 1.15834,-0.83288 4.79444,-2.19532 7.40625,-3.15625 2.87016,-1.05601 3.16734,-1.1618 5.125,-1.53125 1.85349,-0.34979 2.85884,-0.42548 3.03125,-0.4375 0.1136,-0.21724 0.37745,-0.81002 0.90625,-1.0625 0.70944,-0.33874 4.92607,-1.71275 6.96875,-2.3125 1.69317,-0.49711 4.24077,-1.03677 6.09375,-0.90625 0.30795,0.0217 0.61349,0.0973 0.875,0.15625 1.88118,0.42432 7.59375,2.03125 7.59375,2.03125 10e-6,0 -6.34174,-2.06525 -7.15625,-2.3125 -0.19479,-0.0591 -0.55788,-0.10394 -1,-0.125 1.16949,-0.79755 4.86302,-2.05622 7.5,-2.9375 2.89781,-0.96847 3.23301,-1.00332 5.21875,-1.28125 2.04965,-0.28689 3.1875,-0.3125 3.1875,-0.3125 -2e-5,0 -0.0728,-0.60697 1,-1.0625 0.7196,-0.30557 4.99098,-1.50075 7.0625,-2 2.00244,-0.48258 5.19849,-0.92829 7.0625,-0.40625 1.91078,0.53515 7.71875,2.5 7.71875,2.5 0,0 -6.42266,-2.42351 -7.25,-2.71875 -0.19784,-0.0706 -0.58216,-0.14039 -1.03125,-0.1875 1.1879,-0.72865 4.91527,-1.77408 7.59375,-2.5 2.94342,-0.79775 3.29208,-0.77083 5.3125,-0.90625 1.91289,-0.12823 2.94705,-0.0711 3.125,-0.0625 0.11728,-0.20366 0.39176,-0.77948 0.9375,-0.96875 0.73219,-0.25394 5.07852,-1.04789 7.1875,-1.375 1.74813,-0.27111 4.40088,-0.4847 6.3125,-0.0937 0.31766,0.065 0.60522,0.18551 0.875,0.28125 1.94074,0.68873 7.84375,3.09375 7.84375,3.09375 10e-6,0 -6.53471,-2.95077 -7.375,-3.3125 -0.20097,-0.0865 -0.57513,-0.16679 -1.03125,-0.25 1.2065,-0.63318 5.02956,-1.3956 7.75,-1.90625 2.98953,-0.56119 3.30023,-0.52954 5.34375,-0.53125 2.10926,-0.002 3.3125,0.125 3.3125,0.125 0,1e-5 -0.0727,-0.63119 1.03125,-0.9375 0.74052,-0.20547 5.12612,-0.83387 7.25,-1.0625 2.05302,-0.22099 5.31863,-0.25222 7.21875,0.46875 1.94779,0.73907 7.84375,3.375 7.84375,3.375 2e-5,0 -6.56288,-3.17897 -7.40625,-3.5625 -0.20168,-0.0917 -0.54221,-0.18621 -1,-0.28125 1.21092,-0.60188 4.98442,-1.24884 7.71875,-1.65625 3.0048,-0.44772 3.32551,-0.4517 5.375,-0.40625 1.94045,0.043 3.00699,0.19423 3.1875,0.21875 0.11892,-0.19316 0.3839,-0.76583 0.9375,-0.90625 0.74271,-0.18838 5.15429,-0.73428 7.28125,-0.9375 1.76303,-0.16842 4.42009,-0.23429 6.34375,0.25 0.31968,0.0805 0.60351,0.20359 0.875,0.3125 1.95293,0.78349 7.90625,3.46875 7.90625,3.46875 -2e-5,0 -6.59191,-3.25348 -7.4375,-3.65625 -0.20222,-0.0963 -0.57226,-0.20703 -1.03125,-0.3125 1.21414,-0.57427 5.04366,-1.12219 7.78125,-1.5 3.00838,-0.4152 3.32307,-0.44263 5.375,-0.375 2.11798,0.0698 3.3125,0.25 3.3125,0.25 -2e-5,0 -0.0773,-0.63741 1.03125,-0.90625 0.74362,-0.18035 5.15176,-0.66355 7.28125,-0.84375 2.05847,-0.17417 5.34324,-0.12432 7.25,0.65625 1.95459,0.80016 7.875,3.53125 7.875,3.53125 -2e-5,0 -6.55993,-3.30876 -7.40625,-3.71875 -0.20237,-0.0981 -0.57186,-0.2031 -1.03125,-0.3125 1.21517,-0.5639 5.01008,-1.1143 7.75,-1.46875 3.01091,-0.38952 3.32131,-0.39765 5.375,-0.3125 1.94439,0.0806 3.00663,0.25324 3.1875,0.28125 0.11916,-0.19086 0.38277,-0.74531 0.9375,-0.875 0.74426,-0.174 5.14993,-0.65047 7.28125,-0.8125 1.76662,-0.13427 4.4497,-0.12571 6.375,0.375 0.32,0.0832 0.6033,0.20127 0.875,0.3125 1.9546,0.80016 7.9063,3.5625 7.9063,3.5625 -10e-5,0 -6.5912,-3.34001 -7.4375,-3.75 -0.2024,-0.0981 -0.5719,-0.20311 -1.0313,-0.3125 1.2151,-0.5639 5.0413,-1.08306 7.7813,-1.4375 3.0109,-0.38953 3.3525,-0.4289 5.4062,-0.34375 2.1197,0.0879 3.3125,0.3125 3.3125,0.3125 0,0 -0.078,-0.64902 1.0313,-0.90625 0.7443,-0.17256 5.1495,-0.62336 7.2812,-0.78125 2.0606,-0.1526 5.3429,-0.0968 7.25,0.6875 1.955,0.80395 7.875,3.5 7.875,3.5 0,0 -6.5598,-3.27587 -7.4062,-3.6875 -0.2025,-0.0984 -0.5718,-0.20222 -1.0313,-0.3125 1.2154,-0.56154 5.0119,-1.12778 7.75,-1.5 3.009,-0.40905 3.3227,-0.41558 5.375,-0.34375 1.9431,0.068 3.0072,0.16485 3.1875,0.1875 0.1188,-0.1944 0.3846,-0.72881 0.9375,-0.875 0.7418,-0.19612 5.1311,-0.82878 7.25,-1.09375 1.7564,-0.21961 4.4053,-0.33231 6.3125,0.0312 0.3169,0.0604 0.6058,0.18938 0.875,0.28125 1.9362,0.66092 7.8438,2.9375 7.8438,2.9375 -1e-4,0 -6.5367,-2.80655 -7.375,-3.15625 -0.2005,-0.0836 -0.5762,-0.17333 -1.0313,-0.25 1.2037,-0.65046 5.0191,-1.37195 7.7188,-2 2.9667,-0.6902 3.2889,-0.75507 5.3125,-0.875 2.0886,-0.1238 3.2812,-0.0312 3.2812,-0.0312 0,1e-5 -0.087,-0.63205 1,-1.03125 0.7292,-0.2678 5.0472,-1.33797 7.125,-1.8125 2.0085,-0.45869 5.1679,-1.0293 7,-0.625 1.8781,0.41446 13.5782,3.01563 13.5782,3.01563 0,0 -12.3275,-3.02266 -13.1407,-3.26563 -0.1945,-0.0581 -0.5586,-0.10626 -1,-0.125 1.1676,-0.80369 3.5142,-1.6873 6.1094,-2.70312 1.6814,-0.65818 0.9237,-0.37659 2.7759,-1.0036 1.7536,-0.59366 2.4854,-1.01071 2.6304,-1.11299 0.3461,-0.20651 -0.356,-0.12188 -0.5442,-0.0424 z"
- style="display:inline;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter7001-5);enable-background:new"
- sodipodi:nodetypes="czscsssscssssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssccsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscc" />
- <path
- inkscape:connector-curvature="0"
- id="path8095-5"
- d="m 1082.625,-275.125 c 1.873,0.39348 4.4961,1.14555 6.0313,1.96875 1.5352,0.82319 2.8222,1.056 5.375,2.5 2.5266,1.42926 4.7958,2.00696 6.9687,2.53125 2.3476,0.56642 5.4354,0.71523 8.8438,1.1875 -1.0889,-0.83975 -6.6074,-1.17245 -8.4063,-1.5625 -1.7989,-0.39006 -3.8941,-1.01616 -6.5937,-2.3125 -2.6997,-1.29634 -3.4944,-1.79896 -5.8125,-2.6875 -2.3182,-0.88854 -4.0044,-1.38314 -6.4063,-1.625 z"
- style="display:inline;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter6949-4);enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- id="path8097-1"
- d="m 1051.4688,-270 c 1.9053,0.57759 4.5281,1.61572 6.0937,2.59375 1.5656,0.97802 2.8802,1.35981 5.5,3.125 2.593,1.74716 4.9859,2.70927 7.25,3.59375 2.4461,0.95557 5.6826,1.65713 9.4063,3.0625 -1.1896,-1.13784 -7.0631,-2.68675 -8.9375,-3.375 -1.8745,-0.68825 -4.0818,-1.5662 -6.875,-3.28125 -2.7933,-1.71504 -3.5736,-2.2839 -5.9375,-3.40625 -2.3641,-1.12234 -4.0567,-1.83455 -6.5,-2.3125 z"
- style="display:inline;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter6961-8);enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- id="path8099-7"
- d="m 1020.2188,-266.84375 c 1.9119,0.63811 4.5812,1.75536 6.1562,2.8125 1.5751,1.05715 2.8956,1.50867 5.5313,3.40625 2.6086,1.87821 5.0284,3.03003 7.3125,4.0625 2.4677,1.11545 5.7645,2.1733 9.5312,3.84375 -1.2033,-1.22253 -7.2028,-3.31423 -9.0937,-4.125 -1.891,-0.81077 -4.0649,-1.89379 -6.875,-3.75 -2.8102,-1.8562 -3.6218,-2.47693 -6,-3.71875 -2.3783,-1.2418 -4.1107,-1.97569 -6.5625,-2.53125 z"
- style="display:inline;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter6957-9);enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- id="path8101-4"
- d="m 1110.1719,-266.89063 c 0.1508,0.0486 0.688,0.631 0.1094,1.48438 -0.8101,1.19459 -5.7049,3.32429 -8.5625,4.125 -2.8449,0.79712 -6.2901,0.97774 -10.5625,-0.375 -4.3016,-1.36195 -5.4697,-2.46872 -10.6563,-4.3125 4.664,2.11517 6.1953,3.95233 10.125,5.34375 1.6207,0.57387 3.3671,0.9396 5.0625,1.03125 -0.4451,0.32563 -1.5303,0.9833 -3.5625,1.59375 -2.7955,0.83969 -6.6491,1.53378 -8.25,1.625 -1.5146,0.0863 -3.142,-0.51249 -3.4375,-0.625 0.1667,0.10308 0.3732,0.37734 -0.25,1.03125 -0.8993,0.94363 -6.1474,1.923 -9.125,2.25 -2.9643,0.32555 -6.5216,-0.016 -10.9062,-1.90625 -3.978,-1.71497 -5.339,-2.91536 -9.4063,-4.75 0,0 0,0.15625 0,0.15625 3.6431,2.09529 5.284,3.88327 8.875,5.5625 1.7302,0.80909 3.5917,1.40876 5.4063,1.71875 -0.5349,0.28676 -1.5578,0.71151 -3.4375,1.03125 -2.869,0.48796 -6.809,0.81614 -8.4375,0.75 -0.8507,-0.0345 -1.7286,-0.18437 -2.4063,-0.40625 -0.6848,-0.21488 -1.1897,-0.44467 -1.3125,-0.5 0.1694,0.10721 0.4311,0.40288 -0.2187,1.03125 -0.9097,0.87962 -6.2461,1.33638 -9.25,1.46875 -2.9905,0.13179 -6.5889,-0.45063 -11,-2.5625 -4.4412,-2.12626 -5.6415,-3.4016 -10.9063,-5.78125 4.7343,2.59704 6.2865,4.6291 10.3438,6.71875 1.6733,0.86185 3.4852,1.49425 5.25,1.9375 -0.4633,0.23332 -1.5894,0.68814 -3.6875,0.9375 -2.8863,0.34298 -6.8346,0.49288 -8.4688,0.375 -1.5462,-0.1115 -3.2312,-0.85696 -3.5312,-1 0.1691,0.12029 0.4138,0.41048 -0.2188,1 -0.9128,0.85073 -6.2441,1.26212 -9.25,1.375 -2.9925,0.11237 -6.5897,-0.49043 -11,-2.59375 -4.00125,-1.90823 -5.38803,-3.13783 -9.46875,-5.09375 -3e-5,0 0,0.15625 0,0.15625 3.65506,2.20392 5.29421,4.05255 8.90625,5.90625 1.74029,0.89315 3.637,1.52827 5.4688,1.96875 -0.54,0.2483 -1.5781,0.61533 -3.4688,0.84375 -2.88568,0.34858 -6.86605,0.52095 -8.5,0.40625 -0.85345,-0.0599 -1.72631,-0.25791 -2.40625,-0.5 -0.6871,-0.2353 -1.18935,-0.47226 -1.3125,-0.53125 0.16998,0.11227 0.46448,0.42225 -0.1875,1.03125 -0.91265,0.8525 -6.27533,1.29337 -9.28125,1.40625 -2.99246,0.11237 -6.59346,-0.52805 -11,-2.59375 -4.43653,-2.07978 -5.64688,-3.33171 -10.90625,-5.65625 4.72938,2.54749 6.29074,4.5778 10.34375,6.625 1.67155,0.84433 3.48554,1.46643 5.25,1.90625 -0.46323,0.23422 -1.5897,0.68407 -3.6875,0.9375 -2.88569,0.34858 -6.8362,0.56952 -8.46875,0.46875 -1.54456,-0.0953 -3.20031,-0.82885 -3.5,-0.96875 0.16899,0.11853 0.38192,0.40385 -0.25,1 -0.91186,0.86028 -6.24665,1.33025 -9.25,1.46875 -2.98995,0.1379 -6.56745,-0.45068 -10.96875,-2.46875 -3.99308,-1.83089 -5.36511,-3.0292 -9.4375,-4.90625 -2e-5,0 0,0.15625 0,0.15625 3.64761,2.13327 5.27033,3.93487 8.875,5.71875 1.73675,0.85951 3.60727,1.45014 5.4375,1.875 -0.53947,0.2529 -1.55063,0.64129 -3.4375,0.90625 -2.87978,0.40436 -6.83813,0.64562 -8.46875,0.5625 -0.85172,-0.0434 -1.7277,-0.20855 -2.40625,-0.4375 -0.68569,-0.22201 -1.1896,-0.44339 -1.3125,-0.5 0.16959,0.10899 0.4319,0.40965 -0.21875,1.03125 -0.91079,0.87014 -6.25021,1.39152 -9.25,1.5625 -2.98633,0.17021 -6.57381,-0.31577 -10.96875,-2.28125 -4.42489,-1.97888 -5.60596,-3.22819 -10.84375,-5.375 4.70997,2.38767 6.27017,4.38873 10.3125,6.34375 1.66715,0.80631 3.46043,1.39658 5.21875,1.78125 -0.46163,0.2487 -1.597,0.71225 -3.6875,1.03125 -2.8756,0.43876 -6.7804,0.7331 -8.40625,0.6875 -1.53823,-0.0431 -3.2328,-0.74522 -3.53125,-0.875 0.16833,0.11282 0.41057,0.41375 -0.21875,1.03125 -0.90812,0.8911 -6.20295,1.52825 -9.1875,1.8125 -2.97118,0.28298 -6.57342,-0.1758 -10.9375,-1.9375 -3.95934,-1.59831 -5.32915,-2.79487 -9.34375,-4.3125 3e-5,0 0,0.15625 0,0.15625 3.5959,1.81135 5.23831,3.58233 8.8125,5.15625 1.72207,0.75835 3.58748,1.28895 5.40625,1.625 -0.53609,0.27908 -1.56658,0.68763 -3.4375,1.0625 -2.85539,0.5721 -6.78942,1.01939 -8.40625,1.03125 -0.84451,0.006 -1.70608,-0.0809 -2.375,-0.25 -0.67591,-0.16151 -1.16009,-0.32923 -1.28125,-0.375 0.16722,0.094 0.42267,0.38348 -0.21875,1.0625 -0.89787,0.95052 -6.18648,1.91708 -9.125,2.4375 -2.92534,0.51809 -6.43215,0.37424 -10.71875,-1.03125 -4.3158,-1.41507 -5.47277,-2.52994 -10.5625,-3.96875 4.57685,1.75101 6.08855,3.56006 10.03125,5 1.62608,0.59389 3.36885,0.95565 5.09375,1.15625 -0.45285,0.29702 -1.55478,0.88339 -3.59375,1.46875 -2.80472,0.80517 -6.63886,1.57583 -8.21875,1.75 -1.49475,0.1648 -3.11623,-0.31681 -3.40625,-0.40625 0.16356,0.0901 0.39278,0.35993 -0.21875,1.0625 -0.88247,1.01385 -6.04452,2.37165 -8.9375,3.0625 -2.88002,0.68778 -6.3356,0.76002 -10.5625,-0.4375 -3.83485,-1.08645 -5.17258,-2.07237 -9.0625,-3.125 -10e-6,0 0,0.15625 0,0.15625 3.48418,1.39485 5.06941,2.9194 8.53125,4.03125 1.66793,0.53572 3.45578,0.78674 5.21875,0.875 -0.51964,0.35212 -1.50039,0.91452 -3.3125,1.53125 -2.76566,0.94125 -6.59024,1.93537 -8.15625,2.15625 -0.81794,0.11539 -1.6331,0.12283 -2.28125,0.0312 -0.65496,-0.0832 -1.1326,-0.21827 -1.25,-0.25 0.16204,0.0746 0.43399,0.34044 -0.1875,1.09375 -0.87,1.05453 -6.00963,2.65925 -8.875,3.4375 -2.85253,0.77476 -6.25912,0.9582 -10.4375,-0.0937 -4.20683,-1.05913 -5.35669,-2.04166 -10.34375,-3.15625 4.48454,1.45946 5.96935,3.13523 9.8125,4.25 1.58504,0.45977 3.28679,0.63825 4.96875,0.6875 -0.44157,0.33676 -1.51251,1.02773 -3.5,1.78125 -2.73393,1.03649 -6.45198,2.16269 -8,2.4375 -1.46462,0.26002 -3.05958,-0.11654 -3.34375,-0.1875 0.16025,0.0796 0.38044,0.32098 -0.21875,1.0625 -0.86466,1.07006 -5.91652,2.81815 -8.75,3.6875 -2.8208,0.86547 -6.2075,1.15631 -10.34375,0.21875 -3.75259,-0.85061 -5.04785,-1.71647 -8.875,-2.59375 0,0 0,0.15625 0,0.15625 3.42796,1.23779 4.98741,2.6323 8.375,3.53125 1.63216,0.43314 3.36704,0.58301 5.09375,0.5625 -0.50893,0.38417 -1.47675,1.02182 -3.25,1.75 -2.70634,1.11134 -6.43633,2.30781 -7.96875,2.625 -0.8004,0.16569 -1.61231,0.21862 -2.25,0.15625 0,0 0,0.51552 0,0.92229 0,0.26507 0,0.48396 0,0.48396 0.22645,-0.14468 0.44891,-0.27261 0.71875,-0.375 1.08052,-0.40998 2.17161,-0.21577 6,-1.6875 3.82843,-1.47174 5.22412,-2.00498 5.90625,-2.40625 0.6796,-0.39978 1.61165,-0.87937 2.21875,-1.53125 1.82685,-0.13775 3.57075,-0.49323 4.9375,-1 2.96812,-1.10052 4.87537,-1.80619 6.78125,-2.46875 1.90586,-0.66254 2.35409,-1.41487 3.40625,-1.78125 1.09155,-0.38011 2.19511,-0.16538 6.0625,-1.53125 3.86745,-1.36586 5.28316,-1.82708 5.96875,-2.21875 0.70109,-0.40052 1.70081,-0.93298 2.3125,-1.59375 1.9708,-0.0547 3.81685,-0.38463 5.28125,-0.875 3.00148,-1.00508 4.92615,-1.62171 6.84375,-2.25 1.5386,-0.5041 2.17402,-1.04677 2.90625,-1.4375 0.23016,-0.13431 0.47574,-0.25373 0.75,-0.34375 1.09823,-0.36048 2.18145,-0.0814 6.09375,-1.3125 3.91233,-1.23113 5.36605,-1.67295 6.0625,-2.03125 0.69388,-0.35697 1.63015,-0.79261 2.25,-1.40625 1.86521,-0.0227 3.63581,-0.26683 5.03125,-0.6875 3.03043,-0.91354 4.99238,-1.4301 6.9375,-1.96875 1.94511,-0.53864 2.42618,-1.26452 3.5,-1.5625 1.11401,-0.30915 2.21994,0.007 6.1875,-1.03125 3.96761,-1.03863 5.41758,-1.43273 6.125,-1.75 0.73487,-0.32959 1.81383,-0.75372 2.4375,-1.375 1.99774,0.116 3.85743,-0.0201 5.34375,-0.375 3.07811,-0.735 5.08344,-1.10094 7.0625,-1.5 1.58792,-0.32018 2.24429,-0.79055 3,-1.09375 0.23757,-0.1068 0.46695,-0.19276 0.75,-0.25 1.13347,-0.22919 2.30448,0.20893 6.34375,-0.5 4.03933,-0.70893 5.50025,-0.92709 6.21875,-1.1875 0.71586,-0.25944 1.70428,-0.56724 2.34375,-1.09375 1.92427,0.23949 3.74788,0.22453 5.1875,0 3.12633,-0.48762 5.15455,-0.70067 7.15625,-0.96875 2.00171,-0.26807 2.48869,-0.94514 3.59375,-1.09375 1.14639,-0.15418 2.27592,0.30157 6.34375,-0.21875 4.06784,-0.52032 5.56013,-0.69573 6.28125,-0.9375 0.7371,-0.24714 1.79809,-0.58623 2.4375,-1.125 2.05007,0.33553 3.97378,0.39796 5.5,0.21875 3.14231,-0.36896 5.17994,-0.55936 7.1875,-0.78125 1.61076,-0.17802 2.26467,-0.6082 3.03125,-0.84375 0.24094,-0.0855 0.49412,-0.1556 0.78125,-0.1875 1.14978,-0.12772 2.30129,0.34665 6.375,-0.125 4.07374,-0.47165 5.55909,-0.6106 6.28125,-0.84375 0.71946,-0.23227 1.70024,-0.47346 2.34375,-0.96875 1.93637,0.33346 3.77006,0.40424 5.21875,0.25 3.14602,-0.33495 5.17756,-0.51859 7.1875,-0.71875 2.00996,-0.20014 2.48414,-0.82639 3.59375,-0.9375 1.15114,-0.11528 2.29643,0.36506 6.375,-0.0625 4.07861,-0.42756 5.58886,-0.56209 6.3125,-0.78125 0.73915,-0.22386 1.79572,-0.51325 2.4375,-1.03125 2.0571,0.39867 4.00187,0.4934 5.53125,0.34375 3.14873,-0.3081 5.17584,-0.47325 7.1875,-0.65625 1.61407,-0.14682 2.2631,-0.56055 3.03125,-0.78125 0.24142,-0.0809 0.49353,-0.12991 0.78125,-0.15625 1.15211,-0.10545 2.29296,0.39275 6.375,0 4.08208,-0.39275 5.5889,-0.53084 6.3125,-0.75 0.7209,-0.21833 1.6997,-0.4477 2.3438,-0.9375 1.938,0.34999 3.7688,0.45438 5.2187,0.3125 3.1487,-0.3081 5.1758,-0.47325 7.1875,-0.65625 2.0116,-0.18299 2.5142,-0.83802 3.625,-0.9375 1.1523,-0.10323 2.2922,0.38483 6.375,0 4.0829,-0.38482 5.5887,-0.501 6.3125,-0.71875 0.7393,-0.22243 1.7956,-0.51449 2.4375,-1.03125 2.0574,0.40177 4.0029,0.50333 5.5313,0.34375 3.1466,-0.32852 5.1771,-0.5227 7.1875,-0.71875 1.613,-0.15729 2.2656,-0.63148 3.0312,-0.875 0.2407,-0.088 0.4632,-0.12137 0.75,-0.15625 1.1483,-0.1397 2.3167,0.33991 6.375,-0.25 4.0583,-0.58992 5.5618,-0.77714 6.2813,-1.03125 0.7167,-0.25316 1.6745,-0.55807 2.3125,-1.09375 1.9197,0.21194 3.7199,0.15141 5.1562,-0.0937 3.1191,-0.5324 5.1116,-0.92861 7.0938,-1.3125 1.9821,-0.38387 2.4743,-1.03965 3.5625,-1.28125 1.1288,-0.25066 2.2703,0.11629 6.25,-0.875 3.9796,-0.99128 5.4296,-1.4193 6.125,-1.78125 0.7223,-0.37601 1.7619,-0.87058 2.375,-1.53125 1.963,-0.012 3.7937,-0.29105 5.2187,-0.84375 2.9512,-1.14461 4.8732,-1.86942 6.6875,-2.75 1.4557,-0.70653 2.3348,-1.68641 2.5469,-1.98438 0.2122,-0.29796 0.1118,-0.7453 0.1379,-0.76675 0.043,-0.0352 0.3193,-0.085 0.479,-0.42844 0.8589,-1.84708 2.321,-5.64459 2.4352,-6.32945 0.1137,-0.68216 0.1638,-1.34774 0.2145,-1.74497 0.029,-0.22952 -0.1467,-0.86544 -0.1246,-0.92404 0.031,-0.0821 0.3045,-0.26528 0.3599,-0.51471 0.2663,-1.19833 0.089,-2.19129 -0.1251,-3.60893 -0.214,-1.41764 -0.9837,-4.62214 -1.6369,-5.47626 -0.6589,-0.86172 -1.2229,-1.01117 -1.7479,-1.00066 -0.2086,0.26976 0.1368,0.26309 0.1626,0.31261 0.6806,0.0508 0.934,0.36864 1.4192,0.89662 0.4852,0.52798 1.4428,3.93956 1.5794,5.38995 0.1366,1.45039 0.19,2.8602 -0.088,3.46864 -0.2781,0.60845 -0.9442,0.42864 -1.2366,0.49452 0.531,0.18589 0.8908,0.21322 0.9524,1.05768 0.059,0.81338 -0.1332,1.63969 -0.5198,2.80562 -0.3912,1.18001 -1.8452,4.34998 -2.2857,4.59877 -0.4523,0.25551 -0.9524,0.18199 -1.288,0.0511 z"
- style="display:inline;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter6997-5);enable-background:new"
- sodipodi:nodetypes="cssscscsscsssccscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssccscsscscssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsszsszssszzcczzzczzzc" />
- <path
- inkscape:connector-curvature="0"
- id="path8103-3"
- d="m 988.75,-263.84375 c 1.91161,0.6344 4.55027,1.75841 6.125,2.8125 1.57477,1.05409 2.8961,1.48252 5.5313,3.375 2.6082,1.87314 5.0269,3.01522 7.3125,4.0625 2.4693,1.13147 5.7521,2.15474 9.5312,3.9375 -1.2072,-1.2584 -7.139,-3.36445 -9.0312,-4.1875 -1.8922,-0.82304 -4.128,-1.93049 -6.9375,-3.78125 -2.80961,-1.85075 -3.62224,-2.48154 -6.00005,-3.71875 -2.37782,-1.23719 -4.07988,-1.9492 -6.53125,-2.5 z"
- style="display:inline;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter6953-8);enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- id="path8105-1"
- d="m 957.5,-260.78125 c 1.91,0.6181 4.58288,1.70934 6.15625,2.75 1.57339,1.04066 2.89608,1.48252 5.53125,3.375 2.60823,1.87315 5.02692,3.01521 7.3125,4.0625 2.46931,1.13147 5.75213,2.15475 9.53125,3.9375 -1.20728,-1.2584 -7.20154,-3.3957 -9.09375,-4.21875 -1.89217,-0.82304 -4.09666,-1.9305 -6.90625,-3.78125 -2.80958,-1.85075 -3.59295,-2.43932 -5.96875,-3.65625 -2.37578,-1.21691 -4.11321,-1.93885 -6.5625,-2.46875 z"
- style="display:inline;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter6993-3);enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- id="path8107-4"
- d="m 926.09375,-257.375 c 1.90772,0.59745 4.55348,1.66384 6.125,2.6875 1.5715,1.02365 2.87022,1.43971 5.5,3.28125 2.60291,1.82273 5.02887,2.9722 7.3125,4 2.4672,1.11041 5.75535,2.09323 9.53125,3.84375 -1.20623,-1.2481 -7.1719,-3.31809 -9.0625,-4.125 -1.89058,-0.8069 -4.10242,-1.89104 -6.90625,-3.6875 -2.80385,-1.79644 -3.62704,-2.40251 -6,-3.59375 -2.37297,-1.19124 -4.05362,-1.90283 -6.5,-2.40625 z"
- style="display:inline;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter6989-8);enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- id="path8109-6"
- d="m 894.90625,-253.5625 c 1.90213,0.55355 4.58701,1.58887 6.15625,2.59375 1.56923,1.00487 2.87401,1.40864 5.5,3.21875 2.59912,1.79164 5.00034,2.87189 7.28125,3.875 2.46428,1.08374 5.75984,2.04029 9.53125,3.75 -1.2048,-1.23507 -7.17416,-3.24478 -9.0625,-4.03125 -1.88832,-0.78647 -4.0752,-1.8308 -6.875,-3.59375 -2.79977,-1.76294 -3.59919,-2.36836 -5.96875,-3.53125 -2.36957,-1.16288 -4.12325,-1.83412 -6.5625,-2.28125 z"
- style="display:inline;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter6985-6);enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- id="path8111-9"
- d="m 863.71875,-248.65625 c 1.88062,0.42909 4.50427,1.38038 6.0625,2.3125 1.55823,0.93211 2.85233,1.25776 5.46875,3 2.58971,1.72444 4.98067,2.70802 7.25,3.625 2.45176,0.99069 5.73959,1.87707 9.5,3.5 -1.20131,-1.20734 -7.15249,-3.06609 -9.03125,-3.78125 -1.87875,-0.71517 -4.0854,-1.68442 -6.875,-3.375 -2.78963,-1.69057 -3.58461,-2.22822 -5.9375,-3.28125 -2.35292,-1.05301 -4.02584,-1.71248 -6.4375,-2 z"
- style="display:inline;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter6965-3);enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- id="path8113-4"
- d="m 833.15625,-241.375 c 1.84836,0.29644 4.46945,0.97632 6,1.78125 1.53058,0.80493 2.81374,1.05573 5.375,2.53125 2.53504,1.46046 4.89068,2.32509 7.125,3.0625 2.41399,0.79668 5.65711,1.46689 9.375,2.84375 -1.18771,-1.12873 -7.08772,-2.58975 -8.9375,-3.15625 -1.84977,-0.5665 -4.00342,-1.37392 -6.75,-2.84375 -2.74657,-1.46983 -3.50136,-1.92028 -5.8125,-2.78125 -2.31115,-0.86095 -4.00471,-1.32009 -6.375,-1.4375 z"
- style="display:inline;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter6981-3);enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- id="path8115-2"
- d="m 802.90625,-232.3125 c 1.8222,0.21127 4.36576,0.80057 5.875,1.53125 1.50925,0.73066 2.75568,0.92998 5.28125,2.28125 2.49976,1.33746 4.83154,2.04843 7.03125,2.65625 2.37653,0.65667 5.56464,1.07288 9.21875,2.1875 -1.16735,-1.04496 -6.92888,-2.10329 -8.75,-2.5625 -1.82111,-0.45921 -3.95225,-1.12696 -6.65625,-2.4375 -2.70403,-1.31052 -3.47106,-1.7199 -5.75,-2.46875 -2.27895,-0.74883 -3.91325,-1.17931 -6.25,-1.1875 z"
- style="display:inline;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter6977-6);enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- id="path8117-2"
- d="m 773.1875,-222.1875 c 1.81109,0.1787 4.32059,0.66506 5.8125,1.34375 1.49194,0.67869 2.7534,0.79822 5.25,2.0625 2.47107,1.25138 4.79005,1.89614 6.96875,2.4375 2.35387,0.58488 5.49134,0.89752 9.09375,1.84375 -1.15084,-0.99116 -6.85251,-1.7833 -8.65625,-2.1875 -1.80372,-0.4042 -3.91553,-1.02116 -6.59375,-2.25 -2.67818,-1.22884 -3.40345,-1.61089 -5.65625,-2.28125 -2.25279,-0.67034 -3.89627,-1.00232 -6.21875,-0.96875 z"
- style="display:inline;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter6973-4);enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- id="path8119-6"
- d="m 743.5625,-211.1875 c 1.79281,0.12911 4.27313,0.54965 5.75,1.1875 1.4769,0.63785 2.7161,0.74156 5.1875,1.9375 2.44618,1.18372 4.72054,1.74666 6.875,2.21875 2.32767,0.51003 5.4196,0.68064 9,1.5625 -1.14379,-0.9706 -6.74759,-1.59065 -8.53125,-1.9375 -1.78367,-0.34684 -3.88285,-0.88756 -6.53125,-2.03125 -2.64841,-1.14368 -3.39495,-1.51631 -5.625,-2.125 -2.23008,-0.60868 -3.82594,-0.90966 -6.125,-0.8125 z"
- style="display:inline;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter6969-8);enable-background:new" />
- <g
- id="g8121-4"
- style="fill:#ffffff;fill-opacity:1;filter:url(#filter7345-9)">
- <path
- inkscape:connector-curvature="0"
- sodipodi:nodetypes="czzzczzc"
- id="path8123-1"
- d="m 744.9375,-212.11731 c 0,0 7.22229,-3.22318 9.0625,-3.5 1.84021,-0.27682 3.35225,-0.003 6,0.5625 2.64775,0.56573 8.7357,2.21518 11.1875,3.375 2.4518,1.15982 5.3125,3.5625 5.3125,3.5625 0,0 -7.14644,-2.78019 -10.1875,-3.5625 -3.04106,-0.78231 -7.64461,-2.08374 -10.375,-2.3125 -2.73039,-0.22876 -11,1.875 -11,1.875 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
- <path
- inkscape:connector-curvature="0"
- sodipodi:nodetypes="czzzczzc"
- id="path8125-2"
- d="m 735.46875,-206.95416 c 0,0 3.65979,-2.22318 5.5,-2.5 1.84021,-0.27682 3.66475,0.24677 6.3125,0.8125 2.64775,0.56573 8.7357,2.21518 11.1875,3.375 2.4518,1.15982 6.5625,2.125 6.5625,2.125 0,0 -8.39644,-1.34269 -11.4375,-2.125 -3.04106,-0.78231 -7.95711,-2.33374 -10.6875,-2.5625 -2.73039,-0.22876 -7.4375,0.875 -7.4375,0.875 z"
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- sodipodi:nodetypes="czzzczzc"
- id="path8127-8"
- d="m 759.85042,-217.61116 c 0,0 8.5437,-3.29857 10.39778,-3.45786 1.85409,-0.1593 3.64166,0.4792 6.2481,1.21208 2.60644,0.73288 8.57724,2.76594 10.95036,4.07925 2.37312,1.31331 6.41417,2.53782 6.41417,2.53782 0,0 -8.29413,-1.87365 -11.27931,-2.84767 -2.98519,-0.97402 -7.79269,-2.83478 -10.50302,-3.23662 -2.71033,-0.40184 -12.22808,1.713 -12.22808,1.713 z"
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- sodipodi:nodetypes="czzzczzc"
- id="path8129-8"
- d="m 775.19813,-223.2266 c 0,0 7.77133,-2.78244 9.62831,-2.90349 1.85697,-0.12104 3.631,0.55417 6.22178,1.34062 2.59077,0.78645 8.5184,2.94217 10.86394,4.30412 2.34555,1.36195 6.36049,2.6695 6.36049,2.6695 0,0 -8.25373,-2.04423 -11.21821,-3.07958 -2.96447,-1.03535 -7.73259,-2.99481 -10.43406,-3.45243 -2.70147,-0.45763 -11.42225,1.12126 -11.42225,1.12126 z"
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- inkscape:transform-center-y="-4.3190906"
- inkscape:transform-center-x="13.852145"
- sodipodi:nodetypes="czzzczzc"
- id="path8131-9"
- d="m 789.64298,-227.95417 c 0,0 8.68256,-3.52031 10.54154,-3.60535 1.85897,-0.085 3.61958,0.62442 6.19463,1.46093 2.57505,0.83649 8.45979,3.10666 10.77851,4.5138 2.31872,1.40715 6.30757,2.79224 6.30757,2.79224 0,0 -8.21257,-2.20377 -11.15643,-3.29636 -2.94386,-1.09259 -7.67312,-3.14408 -10.36522,-3.65397 -2.69209,-0.50988 -12.3006,1.78871 -12.3006,1.78871 z"
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- inkscape:transform-center-y="-4.3190906"
- inkscape:transform-center-x="13.852145"
- sodipodi:nodetypes="czzzczzc"
- id="path8133-2"
- d="m 804.49513,-233.32948 c 0,0 7.80756,-2.58281 9.66654,-2.66785 1.85897,-0.085 3.61958,0.62442 6.19463,1.46093 2.57505,0.83649 8.45979,3.10666 10.77851,4.5138 2.31872,1.40715 6.30757,2.79224 6.30757,2.79224 0,0 -8.21257,-2.20377 -11.15643,-3.29636 -2.94386,-1.09259 -7.67312,-3.14408 -10.36522,-3.65397 -2.69209,-0.50988 -11.4256,0.85121 -11.4256,0.85121 z"
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- inkscape:transform-center-y="-4.3190906"
- inkscape:transform-center-x="13.852145"
- sodipodi:nodetypes="czzzczzc"
- id="path8135-8"
- d="m 819.55763,-237.57948 c 0,0 8.55756,-2.58281 10.41654,-2.66785 1.85897,-0.085 3.61958,0.62442 6.19463,1.46093 2.57505,0.83649 8.45979,3.10666 10.77851,4.5138 2.31872,1.40715 6.30757,2.79224 6.30757,2.79224 0,0 -8.21257,-2.20377 -11.15643,-3.29636 -2.94386,-1.09259 -7.67312,-3.14408 -10.36522,-3.65397 -2.69209,-0.50988 -12.1756,0.85121 -12.1756,0.85121 z"
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- inkscape:transform-center-y="-4.9269042"
- inkscape:transform-center-x="13.64141"
- sodipodi:nodetypes="czzzczzc"
- id="path8137-8"
- d="m 836.23395,-242.60125 c 0,0 6.96702,-1.98723 8.82784,-1.96757 1.86081,0.0197 3.57873,0.82702 6.10265,1.80705 2.52393,0.98 8.27166,3.57758 10.50756,5.11291 2.2359,1.53535 6.14053,3.14261 6.14053,3.14261 0,0 -8.07561,-2.66222 -10.95336,-3.91866 -2.87774,-1.25645 -7.48412,-3.5707 -10.14328,-4.23121 -2.65915,-0.66049 -10.48194,0.0549 -10.48194,0.0549 z"
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- inkscape:transform-center-y="-5.1542119"
- inkscape:transform-center-x="13.55068"
- sodipodi:nodetypes="czzzczzc"
- id="path8139-8"
- d="m 850.73028,-246.00461 c 0,0 7.68784,-2.02768 9.54782,-1.96854 1.85997,0.0592 3.56038,0.90279 6.06293,1.93616 2.50255,1.03334 8.19387,3.75232 10.39668,5.33475 2.20282,1.58245 6.07245,3.2722 6.07245,3.2722 0,0 -8.01729,-2.83298 -10.86772,-4.15022 -2.85043,-1.31723 -7.40666,-3.72872 -10.0512,-4.4455 -2.64454,-0.71678 -11.16096,0.0211 -11.16096,0.0211 z"
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- inkscape:transform-center-y="-5.4740887"
- inkscape:transform-center-x="13.41151"
- sodipodi:nodetypes="czzzczzc"
- id="path8141-6"
- d="m 864.82496,-249.21081 c 0,0 8.16952,-1.96906 10.02688,-1.85396 1.85735,0.11512 3.53158,1.00956 6.0019,2.11779 2.47031,1.10821 8.0772,3.99727 10.23138,5.64531 2.15418,1.64804 5.9712,3.45352 5.9712,3.45352 0,0 -7.92839,-3.07306 -10.73787,-4.4755 -2.80949,-1.40244 -7.29106,-3.94999 -9.91283,-4.74606 -2.62176,-0.79606 -11.58066,-0.1411 -11.58066,-0.1411 z"
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- inkscape:transform-center-y="-5.79376"
- inkscape:transform-center-x="13.258805"
- sodipodi:nodetypes="czzzczzc"
- id="path8143-8"
- d="m 881.38485,-251.60282 c 0,0 8.08536,-1.90809 9.93837,-1.73664 1.853,0.17147 3.4993,1.11633 5.93482,2.29908 2.43553,1.18271 7.95209,4.2407 10.05523,5.95339 2.10314,1.7127 5.86357,3.63326 5.86357,3.63326 0,0 -7.8314,-3.3124 -10.597,-4.7995 -2.76561,-1.48712 -7.16775,-4.16959 -9.76414,-5.04491 -2.59637,-0.87531 -11.43085,-0.30468 -11.43085,-0.30468 z"
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8145-3"
- d="m 896.58415,-254.34724 c 0,0 7.64166,-1.4277 9.49547,-1.26515 1.8538,0.16256 3.50462,1.0995 5.94579,2.27053 2.44118,1.171 7.97238,4.20246 10.08372,5.90502 2.11134,1.70258 5.88096,3.60505 5.88096,3.60505 0,0 -7.84723,-3.27474 -10.61995,-4.74855 -2.77271,-1.4738 -7.18769,-4.13509 -9.78825,-4.99793 -2.60055,-0.86282 -10.99774,-0.76897 -10.99774,-0.76897 z"
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8147-8"
- d="m 911.45328,-255.98544 c 0,0 8.64166,-1.5527 10.49547,-1.39015 1.8538,0.16256 3.50462,1.0995 5.94579,2.27053 2.44118,1.171 7.97238,4.20246 10.08372,5.90502 2.11134,1.70258 5.88096,3.60505 5.88096,3.60505 0,0 -7.84723,-3.27474 -10.61995,-4.74855 -2.77271,-1.4738 -7.18769,-4.13509 -9.78825,-4.99793 -2.60055,-0.86282 -11.99774,-0.64397 -11.99774,-0.64397 z"
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8149-3"
- d="m 927.70328,-258.29794 c 0,0 7.64166,-0.8652 9.49547,-0.70265 1.8538,0.16256 3.50462,1.0995 5.94579,2.27053 2.44118,1.171 7.97238,4.20246 10.08372,5.90502 2.11134,1.70258 5.88096,3.60505 5.88096,3.60505 0,0 -7.84723,-3.27474 -10.61995,-4.74855 -2.77271,-1.4738 -7.18769,-4.13509 -9.78825,-4.99793 -2.60055,-0.86282 -10.99774,-1.33147 -10.99774,-1.33147 z"
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8151-3"
- d="m 942.82828,-259.48544 c 0,0 8.57916,-1.4902 10.43297,-1.32765 1.8538,0.16256 3.50462,1.0995 5.94579,2.27053 2.44118,1.171 7.97238,4.20246 10.08372,5.90502 2.11134,1.70258 5.88096,3.60505 5.88096,3.60505 0,0 -7.84723,-3.27474 -10.61995,-4.74855 -2.77271,-1.4738 -7.18769,-4.13509 -9.78825,-4.99793 -2.60055,-0.86282 -11.93524,-0.70647 -11.93524,-0.70647 z"
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8153-3"
- d="m 959.07828,-261.54794 c 0,0 7.82916,-0.8027 9.68297,-0.64015 1.8538,0.16256 3.50462,1.0995 5.94579,2.27053 2.44118,1.171 7.97238,4.20246 10.08372,5.90502 2.11134,1.70258 5.88096,3.60505 5.88096,3.60505 0,0 -7.84723,-3.27474 -10.61995,-4.74855 -2.77271,-1.4738 -7.18769,-4.13509 -9.78825,-4.99793 -2.60055,-0.86282 -11.18524,-1.39397 -11.18524,-1.39397 z"
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8155-8"
- d="m 974.45328,-262.79794 c 0,0 8.39166,-1.1777 10.24547,-1.01515 1.8538,0.16256 3.50462,1.0995 5.94579,2.27053 2.44118,1.171 7.97238,4.20246 10.08376,5.90502 2.1113,1.70258 5.8809,3.60505 5.8809,3.60505 0,0 -7.84721,-3.27474 -10.61993,-4.74855 -2.77271,-1.4738 -7.18769,-4.13509 -9.78825,-4.99793 -2.60055,-0.86282 -11.74774,-1.01897 -11.74774,-1.01897 z"
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8157-0"
- d="m 990.64078,-264.86044 c 0,0 6.89166,-0.9902 8.74547,-0.82765 1.85385,0.16256 3.50465,1.0995 5.94575,2.27053 2.4412,1.171 7.9724,4.20246 10.0838,5.90502 2.1113,1.70258 5.8809,3.60505 5.8809,3.60505 0,0 -7.8472,-3.27474 -10.6199,-4.74855 -2.7727,-1.4738 -7.1877,-4.13509 -9.7883,-4.99793 -2.60053,-0.86282 -10.24772,-1.20647 -10.24772,-1.20647 z"
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8159-4"
- d="m 1007.7658,-265.79794 c 0,0 6.8291,-1.1777 8.683,-1.01515 1.8538,0.16256 3.5046,1.0995 5.9457,2.27053 2.4412,1.171 7.9724,4.20246 10.0838,5.90502 2.1113,1.70258 5.8809,3.60505 5.8809,3.60505 0,0 -7.8472,-3.27474 -10.6199,-4.74855 -2.7727,-1.4738 -7.1877,-4.13509 -9.7883,-4.99793 -2.6005,-0.86282 -10.1852,-1.01897 -10.1852,-1.01897 z"
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8161-7"
- d="m 1023.8908,-267.79794 c 0,0 6.0791,-0.4277 7.933,-0.26515 1.8538,0.16256 3.5046,1.0995 5.9457,2.27053 2.4412,1.171 7.9724,4.20246 10.0838,5.90502 2.1113,1.70258 5.8809,3.60505 5.8809,3.60505 0,0 -7.8472,-3.27474 -10.6199,-4.74855 -2.7727,-1.4738 -7.1877,-4.13509 -9.7883,-4.99793 -2.6005,-0.86282 -9.4352,-1.76897 -9.4352,-1.76897 z"
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8163-6"
- d="m 1039.7033,-269.17294 c 0,0 6.4541,-0.6777 8.308,-0.51515 1.8538,0.16256 3.5046,1.0995 5.9457,2.27053 2.4412,1.171 7.9724,4.20246 10.0838,5.90502 2.1113,1.70258 5.8809,3.60505 5.8809,3.60505 0,0 -7.8472,-3.27474 -10.6199,-4.74855 -2.7727,-1.4738 -7.1877,-4.13509 -9.7883,-4.99793 -2.6005,-0.86282 -9.8102,-1.51897 -9.8102,-1.51897 z"
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- inkscape:transform-center-y="-5.1360724"
- inkscape:transform-center-x="13.55813"
- sodipodi:nodetypes="czzzczzc"
- id="path8165-8"
- d="m 1055.2718,-271.03319 c 0,0 5.4976,-0.90945 7.3578,-0.85348 1.8601,0.056 3.5619,0.89674 6.0661,1.92586 2.5044,1.0291 8.2003,3.7384 10.4058,5.31709 2.2055,1.57871 6.078,3.2619 6.078,3.2619 0,0 -8.022,-2.81939 -10.8748,-4.13178 -2.8526,-1.31238 -7.4129,-3.71613 -10.0587,-4.42843 -2.6457,-0.71228 -8.9742,-1.09116 -8.9742,-1.09116 z"
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- inkscape:transform-center-y="-4.6370147"
- inkscape:transform-center-x="13.74758"
- sodipodi:nodetypes="czzzczzc"
- id="path8167-9"
- d="m 1072.7007,-273.48537 c 0,0 4.5472,-1.15581 6.408,-1.18621 1.8607,-0.0304 3.5996,0.73049 6.1489,1.64231 2.5494,0.91177 8.3649,3.35386 10.6414,4.8285 2.2763,1.47468 6.2227,2.97636 6.2227,2.97636 0,0 -8.1442,-2.44411 -11.0547,-3.62272 -2.9105,-1.1786 -7.5774,-3.36815 -10.2534,-3.95691 -2.6759,-0.58875 -8.1129,-0.68133 -8.1129,-0.68133 z"
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- inkscape:transform-center-y="-4.4842392"
- inkscape:transform-center-x="13.79933"
- sodipodi:nodetypes="czzzczzc"
- id="path8169-0"
- d="m 1087.1585,-276.5244 c 0,0 5.96,-1.77355 7.8202,-1.83024 1.86,-0.0567 3.6096,0.67955 6.1715,1.55525 2.562,0.87566 2.5226,0.85713 5.3335,1.49015 2.7969,0.62986 7.0767,1.51313 7.0767,1.51313 0,0 -3.6155,-0.0163 -6.7923,-0.46614 -3.1155,-0.44119 -7.3743,-1.69825 -10.0584,-2.24913 -2.6839,-0.55088 -9.5512,-0.013 -9.5512,-0.013 z"
- style="display:inline;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- sodipodi:nodetypes="czczc"
- id="path8171-6"
- d="m 1099.25,-279.92981 c 0.1612,0.26862 11.2081,-4.60046 12.1875,-4.6875 0.9794,-0.087 2,3.125 2,3.125 0,0 -0.7751,-1.50434 -2.875,-1.0625 -2.0999,0.44184 -11.3009,2.67141 -11.3125,2.625 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
- </g>
- <path
- inkscape:connector-curvature="0"
- id="path8173-8"
- d="m 1107.4532,-284.0938 c -0.4187,0.21283 -0.1556,0.0939 -0.6472,0.30581 -0.4861,0.20954 -1.7234,0.57439 -4.0796,1.45895 -3.3311,1.25057 -5.8302,2.15344 -7.0259,3.0661 -1.5361,0.0213 -3.7205,0.23331 -5.6563,0.71875 -2.9815,0.74766 -4.8552,1.17401 -6.75,1.59375 -1.8948,0.41972 -1.6755,0.64219 -2.875,0.875 -1.2966,0.25166 -1.7214,-0.009 -5.4375,0.78125 -3.4899,0.74214 -8.8948,1.93107 -10.1562,2.6875 -1.5839,-0.18079 -3.8675,-0.32178 -5.8438,-0.0312 -3.0404,0.44695 -4.9162,0.67276 -6.8437,0.90625 -0.6554,0.0794 -1.0411,0.20078 -1.3438,0.28125 -0.4262,0.13165 -0.6858,0.26002 -1.375,0.34375 -1.3116,0.15936 -1.7622,-0.15683 -5.5312,0.28125 -3.5539,0.41308 -9.0054,1.27282 -10.25,1.9375 -1.599,-0.2973 -3.8578,-0.53419 -5.8438,-0.34375 -3.0588,0.29331 -4.972,0.48399 -6.9062,0.65625 -1.9343,0.17226 -1.6887,0.42237 -2.9063,0.53125 -1.3162,0.11769 -1.7598,-0.16363 -5.5312,0.25 -3.5419,0.38844 -9.0079,1.20927 -10.2813,1.875 -1.5989,-0.2947 -3.88718,-0.50701 -5.87501,-0.3125 -3.05824,0.29924 -4.94113,0.48024 -6.875,0.65625 -0.65749,0.0598 -1.04004,0.17856 -1.34375,0.25 -0.42765,0.11895 -0.68351,0.21807 -1.375,0.28125 -1.31596,0.12025 -1.75976,-0.19488 -5.53125,0.21875 -3.55614,0.39001 -9.00554,1.23916 -10.25,1.90625 -1.59863,-0.29419 -3.85984,-0.52372 -5.84375,-0.3125 -3.0556,0.32532 -4.97404,0.52624 -6.90625,0.71875 -1.93221,0.1925 -1.68987,0.44088 -2.90625,0.5625 -1.31488,0.13146 -1.76298,-0.16454 -5.53125,0.28125 -3.53887,0.41865 -8.97768,1.29217 -10.25,1.96875 -1.59755,-0.28105 -3.85996,-0.42043 -5.84375,-0.1875 -3.05198,0.35836 -4.94508,0.56786 -6.875,0.78125 -0.6562,0.0726 -1.04066,0.17269 -1.34375,0.25 -0.42677,0.12722 -0.68491,0.2672 -1.375,0.34375 -1.31333,0.14568 -1.76746,-0.17402 -5.53125,0.3125 -3.54889,0.45875 -8.97863,1.41902 -10.21875,2.125 -1.59305,-0.24424 -3.83381,-0.38135 -5.8125,-0.125 -3.04759,0.39481 -4.95071,0.64845 -6.875,0.90625 -1.92428,0.25779 -1.72611,0.49353 -2.9375,0.65625 -1.30946,0.1759 -1.74719,-0.10438 -5.5,0.46875 -3.52429,0.53824 -8.92315,1.69917 -10.1875,2.4375 -1.5875,-0.20354 -3.8455,-0.25473 -5.8125,0.0937 -3.02617,0.53612 -4.89889,0.86169 -6.8125,1.1875 -0.65061,0.11077 -1.01371,0.27094 -1.3125,0.375 -0.42067,0.16488 -0.66345,0.3313 -1.34375,0.46875 -1.29465,0.26159 -1.72712,-0.006 -5.4375,0.8125 -3.49853,0.77195 -8.84595,2.38293 -10.0625,3.21875 -1.56278,-0.0775 -3.75758,0.0853 -5.6875,0.59375 -2.97244,0.78313 -4.81761,1.23209 -6.6875,1.75 -1.86988,0.5179 -1.6666,0.76728 -2.84375,1.09375 -1.27246,0.3529 -1.69703,0.10709 -5.34375,1.1875 -3.4247,1.01463 -8.64944,2.93317 -9.875,3.84375 -1.53883,0.0127 -3.71983,0.27222 -5.625,0.875 -2.93106,0.92734 -4.75031,1.45842 -6.59375,2.0625 -0.62676,0.20538 -0.99173,0.39258 -1.28125,0.53125 -0.40763,0.21361 -0.65334,0.40875 -1.3125,0.625 -1.25446,0.41154 -1.68611,0.18904 -5.28125,1.4375 -3.38985,1.17717 -8.59498,3.2137 -9.78125,4.15625 -1.52389,0.0597 -3.65005,0.39487 -5.53125,1.0625 -2.89739,1.02829 -4.69908,1.67548 -6.53125,2.3125 -1.83217,0.63701 -1.62785,0.84854 -2.78125,1.25 -1.24678,0.43396 -1.66361,0.19972 -5.21875,1.5625 -3.33867,1.2798 -8.48715,3.48255 -9.6875,4.46875 -1.50718,0.10769 -3.63569,0.4988 -5.5,1.21875 -2.86818,1.1076 -4.6238,1.78156 -6.4375,2.46875 -0.61666,0.23363 -0.99641,0.44203 -1.28125,0.59375 0,0 0,1.09375 0,1.09375 0.11178,-0.22236 0.38599,-0.81743 0.90625,-1.09375 0.69797,-0.37072 4.81363,-1.99337 6.8125,-2.71875 1.65686,-0.60125 4.15389,-1.32868 5.96875,-1.3125 0.30162,0.003 0.58762,0.0509 0.84375,0.0937 1.84249,0.30825 7.46875,1.5625 7.46875,1.5625 -10e-6,0 -6.23349,-1.64675 -7.03125,-1.84375 -0.19079,-0.0471 -0.53572,-0.0687 -0.96875,-0.0625 1.14546,-0.86971 4.761,-2.39351 7.34375,-3.4375 2.83822,-1.14727 3.11681,-1.25182 5.0625,-1.65625 2.0083,-0.41744 3.15625,-0.5 3.15625,-0.5 0,1e-5 -0.0824,-0.60114 0.96875,-1.125 0.7051,-0.35141 4.88702,-1.8924 6.90625,-2.5625 1.9519,-0.64773 5.0574,-1.3585 6.875,-1 1.86323,0.3675 7.53125,1.8125 7.53125,1.8125 1e-5,0 -6.287,-1.87111 -7.09375,-2.09375 -0.19292,-0.0533 -0.53084,-0.086 -0.96875,-0.0937 1.15834,-0.83288 4.79444,-2.19532 7.40625,-3.15625 2.87016,-1.05601 3.16734,-1.1618 5.125,-1.53125 1.85349,-0.34979 2.85884,-0.42548 3.03125,-0.4375 0.1136,-0.21724 0.37745,-0.81002 0.90625,-1.0625 0.70944,-0.33874 4.92607,-1.71275 6.96875,-2.3125 1.69317,-0.49711 4.24077,-1.03677 6.09375,-0.90625 0.30795,0.0217 0.61349,0.0973 0.875,0.15625 1.88118,0.42432 7.59375,2.03125 7.59375,2.03125 1e-5,0 -6.34174,-2.06525 -7.15625,-2.3125 -0.19479,-0.0591 -0.55788,-0.10394 -1,-0.125 1.16949,-0.79755 4.86302,-2.05622 7.5,-2.9375 2.89781,-0.96847 3.23301,-1.00332 5.21875,-1.28125 2.04965,-0.28689 3.1875,-0.3125 3.1875,-0.3125 -2e-5,0 -0.0727,-0.60697 1,-1.0625 0.7196,-0.30557 4.99098,-1.50075 7.0625,-2 2.00244,-0.48258 5.19849,-0.92829 7.0625,-0.40625 1.91078,0.53515 7.71875,2.5 7.71875,2.5 0,0 -6.42266,-2.42351 -7.25,-2.71875 -0.19784,-0.0706 -0.58216,-0.14039 -1.03125,-0.1875 1.1879,-0.72865 4.91527,-1.77408 7.59375,-2.5 2.94342,-0.79775 3.29208,-0.77083 5.3125,-0.90625 1.91289,-0.12823 2.94705,-0.0711 3.125,-0.0625 0.11728,-0.20366 0.39176,-0.77948 0.9375,-0.96875 0.73219,-0.25394 5.07852,-1.04789 7.1875,-1.375 1.74813,-0.27111 4.40088,-0.4847 6.3125,-0.0937 0.31766,0.065 0.60522,0.18551 0.875,0.28125 1.94074,0.68873 7.84375,3.09375 7.84375,3.09375 1e-5,0 -6.53471,-2.95077 -7.375,-3.3125 -0.20097,-0.0865 -0.57513,-0.16679 -1.03125,-0.25 1.2065,-0.63318 5.02956,-1.3956 7.75,-1.90625 2.98953,-0.56119 3.30023,-0.52954 5.34375,-0.53125 2.10926,-0.002 3.3125,0.125 3.3125,0.125 0,1e-5 -0.0727,-0.63119 1.03125,-0.9375 0.74052,-0.20547 5.12612,-0.83387 7.25,-1.0625 2.05302,-0.22099 5.31863,-0.25222 7.21875,0.46875 1.94779,0.73907 7.84375,3.375 7.84375,3.375 2e-5,0 -6.56288,-3.17897 -7.40625,-3.5625 -0.20168,-0.0917 -0.54221,-0.18621 -1,-0.28125 1.21092,-0.60188 4.98442,-1.24884 7.71875,-1.65625 3.0048,-0.44772 3.32551,-0.4517 5.375,-0.40625 1.94045,0.043 3.00699,0.19423 3.1875,0.21875 0.11892,-0.19316 0.3839,-0.76583 0.9375,-0.90625 0.74271,-0.18838 5.15429,-0.73428 7.28125,-0.9375 1.76303,-0.16842 4.42009,-0.23429 6.34375,0.25 0.31968,0.0805 0.60351,0.20359 0.875,0.3125 1.95293,0.78349 7.90625,3.46875 7.90625,3.46875 -2e-5,0 -6.59191,-3.25348 -7.4375,-3.65625 -0.20222,-0.0963 -0.57226,-0.20703 -1.03125,-0.3125 1.21414,-0.57427 5.04366,-1.12219 7.78125,-1.5 3.00838,-0.4152 3.32307,-0.44263 5.375,-0.375 2.11798,0.0698 3.3125,0.25 3.3125,0.25 -2e-5,0 -0.0772,-0.63741 1.03125,-0.90625 0.74362,-0.18035 5.15176,-0.66355 7.28125,-0.84375 2.05847,-0.17417 5.34324,-0.12432 7.25,0.65625 1.95459,0.80016 7.875,3.53125 7.875,3.53125 -2e-5,0 -6.55993,-3.30876 -7.40625,-3.71875 -0.20237,-0.0981 -0.57186,-0.2031 -1.03125,-0.3125 1.21517,-0.5639 5.01008,-1.1143 7.75,-1.46875 3.01091,-0.38952 3.32131,-0.39765 5.375,-0.3125 1.94439,0.0806 3.00663,0.25324 3.1875,0.28125 0.11916,-0.19086 0.38277,-0.74531 0.9375,-0.875 0.74426,-0.174 5.14993,-0.65047 7.28125,-0.8125 1.76662,-0.13427 4.44971,-0.12571 6.37501,0.375 0.32,0.0832 0.6033,0.20127 0.875,0.3125 1.9546,0.80016 7.9063,3.5625 7.9063,3.5625 -1e-4,0 -6.5912,-3.34001 -7.4375,-3.75 -0.2024,-0.0981 -0.5719,-0.20311 -1.0313,-0.3125 1.2151,-0.5639 5.0413,-1.08306 7.7813,-1.4375 3.0109,-0.38953 3.3525,-0.4289 5.4062,-0.34375 2.1197,0.0879 3.3125,0.3125 3.3125,0.3125 0,0 -0.078,-0.64902 1.0313,-0.90625 0.7443,-0.17256 5.1495,-0.62336 7.2812,-0.78125 2.0606,-0.1526 5.3429,-0.0968 7.25,0.6875 1.955,0.80395 7.875,3.5 7.875,3.5 0,0 -6.5598,-3.27587 -7.4062,-3.6875 -0.2025,-0.0984 -0.5718,-0.20222 -1.0313,-0.3125 1.2154,-0.56154 5.0119,-1.12778 7.75,-1.5 3.009,-0.40905 3.3227,-0.41558 5.375,-0.34375 1.9431,0.068 3.0072,0.16485 3.1875,0.1875 0.1188,-0.1944 0.3846,-0.72881 0.9375,-0.875 0.7418,-0.19612 5.1311,-0.82878 7.25,-1.09375 1.7564,-0.21961 4.4053,-0.33231 6.3125,0.0312 0.3169,0.0604 0.6058,0.18938 0.875,0.28125 1.9362,0.66092 7.8438,2.9375 7.8438,2.9375 -10e-5,0 -6.5367,-2.80655 -7.375,-3.15625 -0.2005,-0.0836 -0.5762,-0.17333 -1.0313,-0.25 1.2037,-0.65046 5.0191,-1.37195 7.7188,-2 2.9667,-0.6902 3.2889,-0.75507 5.3125,-0.875 2.0886,-0.1238 3.2812,-0.0312 3.2812,-0.0312 0,1e-5 -0.087,-0.63205 1,-1.03125 0.7292,-0.2678 5.0472,-1.33797 7.125,-1.8125 2.0085,-0.45869 5.1679,-1.0293 7,-0.625 1.8781,0.41446 13.5782,3.01563 13.5782,3.01563 0,0 -12.3275,-3.02266 -13.1407,-3.26563 -0.1945,-0.0581 -0.5586,-0.10626 -1,-0.125 1.1676,-0.80369 3.5142,-1.6873 6.1094,-2.70312 1.6814,-0.65818 0.9237,-0.37659 2.7759,-1.0036 1.7536,-0.59366 2.4854,-1.01071 2.6304,-1.11299 0.3461,-0.20651 -0.356,-0.12188 -0.5442,-0.0424 z"
- style="display:inline;opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter7333-7);enable-background:new"
- sodipodi:nodetypes="czscsssscssssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssccsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscc" />
- <path
- inkscape:connector-curvature="0"
- id="path8175-7"
- d="m 1082.625,-275.125 c 1.873,0.39348 4.4961,1.14555 6.0313,1.96875 1.5352,0.82319 2.8222,1.056 5.375,2.5 2.5266,1.42926 4.7958,2.00696 6.9687,2.53125 2.3476,0.56642 5.4354,0.71523 8.8438,1.1875 -1.0889,-0.83975 -6.6074,-1.17245 -8.4063,-1.5625 -1.7989,-0.39006 -3.8941,-1.01616 -6.5937,-2.3125 -2.6997,-1.29634 -3.4944,-1.79896 -5.8125,-2.6875 -2.3182,-0.88854 -4.0044,-1.38314 -6.4063,-1.625 z"
- style="display:inline;opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter7285-4);enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- id="path8177-9"
- d="m 1051.4688,-270 c 1.9053,0.57759 4.5281,1.61572 6.0937,2.59375 1.5656,0.97802 2.8802,1.35981 5.5,3.125 2.593,1.74716 4.9859,2.70927 7.25,3.59375 2.4461,0.95557 5.6826,1.65713 9.4063,3.0625 -1.1896,-1.13784 -7.0631,-2.68675 -8.9375,-3.375 -1.8745,-0.68825 -4.0818,-1.5662 -6.875,-3.28125 -2.7933,-1.71504 -3.5736,-2.2839 -5.9375,-3.40625 -2.3641,-1.12234 -4.0567,-1.83455 -6.5,-2.3125 z"
- style="display:inline;opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter7289-0);enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- id="path8179-0"
- d="m 1020.2188,-266.84375 c 1.9119,0.63811 4.5812,1.75536 6.1562,2.8125 1.5751,1.05715 2.8956,1.50867 5.5313,3.40625 2.6086,1.87821 5.0284,3.03003 7.3125,4.0625 2.4677,1.11545 5.7645,2.1733 9.5312,3.84375 -1.2033,-1.22253 -7.2028,-3.31423 -9.0937,-4.125 -1.891,-0.81077 -4.0649,-1.89379 -6.875,-3.75 -2.8102,-1.8562 -3.6218,-2.47693 -6,-3.71875 -2.3783,-1.2418 -4.1107,-1.97569 -6.5625,-2.53125 z"
- style="display:inline;opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter7293-0);enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- id="path8181-3"
- d="m 1110.1719,-266.89063 c 0.1508,0.0486 0.688,0.631 0.1094,1.48438 -0.8101,1.19459 -5.7049,3.32429 -8.5625,4.125 -2.8449,0.79712 -6.2901,0.97774 -10.5625,-0.375 -4.3016,-1.36195 -5.4697,-2.46872 -10.6563,-4.3125 4.664,2.11517 6.1953,3.95233 10.125,5.34375 1.6207,0.57387 3.3671,0.9396 5.0625,1.03125 -0.4451,0.32563 -1.5303,0.9833 -3.5625,1.59375 -2.7955,0.83969 -6.6491,1.53378 -8.25,1.625 -1.5146,0.0863 -3.142,-0.51249 -3.4375,-0.625 0.1667,0.10308 0.3732,0.37734 -0.25,1.03125 -0.8993,0.94363 -6.1474,1.923 -9.125,2.25 -2.9643,0.32555 -6.5216,-0.016 -10.9062,-1.90625 -3.978,-1.71497 -5.339,-2.91536 -9.4063,-4.75 0,0 0,0.15625 0,0.15625 3.6431,2.09529 5.284,3.88327 8.875,5.5625 1.7302,0.80909 3.5917,1.40876 5.4063,1.71875 -0.5349,0.28676 -1.5578,0.71151 -3.4375,1.03125 -2.869,0.48796 -6.809,0.81614 -8.4375,0.75 -0.8507,-0.0345 -1.7286,-0.18437 -2.4063,-0.40625 -0.6848,-0.21488 -1.1897,-0.44467 -1.3125,-0.5 0.1694,0.10721 0.4311,0.40288 -0.2187,1.03125 -0.9097,0.87962 -6.2461,1.33638 -9.25,1.46875 -2.9905,0.13179 -6.5889,-0.45063 -11,-2.5625 -4.4412,-2.12626 -5.6415,-3.4016 -10.9063,-5.78125 4.7343,2.59704 6.2865,4.6291 10.3438,6.71875 1.6733,0.86185 3.4852,1.49425 5.25,1.9375 -0.4633,0.23332 -1.5894,0.68814 -3.6875,0.9375 -2.8863,0.34298 -6.8346,0.49288 -8.4688,0.375 -1.5462,-0.1115 -3.2312,-0.85696 -3.5312,-1 0.1691,0.12029 0.4138,0.41048 -0.2188,1 -0.9128,0.85073 -6.2441,1.26212 -9.25,1.375 -2.9925,0.11237 -6.5897,-0.49043 -11,-2.59375 -4.00125,-1.90823 -5.38803,-3.13783 -9.46875,-5.09375 -3e-5,0 0,0.15625 0,0.15625 3.65506,2.20392 5.29421,4.05255 8.90625,5.90625 1.74029,0.89315 3.637,1.52827 5.4688,1.96875 -0.54,0.2483 -1.5781,0.61533 -3.4688,0.84375 -2.88568,0.34858 -6.86605,0.52095 -8.5,0.40625 -0.85345,-0.0599 -1.72631,-0.25791 -2.40625,-0.5 -0.6871,-0.2353 -1.18935,-0.47226 -1.3125,-0.53125 0.16998,0.11227 0.46448,0.42225 -0.1875,1.03125 -0.91265,0.8525 -6.27533,1.29337 -9.28125,1.40625 -2.99246,0.11237 -6.59346,-0.52805 -11,-2.59375 -4.43653,-2.07978 -5.64688,-3.33171 -10.90625,-5.65625 4.72938,2.54749 6.29074,4.5778 10.34375,6.625 1.67155,0.84433 3.48554,1.46643 5.25,1.90625 -0.46323,0.23422 -1.5897,0.68407 -3.6875,0.9375 -2.88569,0.34858 -6.8362,0.56952 -8.46875,0.46875 -1.54456,-0.0953 -3.20031,-0.82885 -3.5,-0.96875 0.16899,0.11853 0.38192,0.40385 -0.25,1 -0.91186,0.86028 -6.24665,1.33025 -9.25,1.46875 -2.98995,0.1379 -6.56745,-0.45068 -10.96875,-2.46875 -3.99308,-1.83089 -5.36511,-3.0292 -9.4375,-4.90625 -2e-5,0 0,0.15625 0,0.15625 3.64761,2.13327 5.27033,3.93487 8.875,5.71875 1.73675,0.85951 3.60727,1.45014 5.4375,1.875 -0.53947,0.2529 -1.55063,0.64129 -3.4375,0.90625 -2.87978,0.40436 -6.83813,0.64562 -8.46875,0.5625 -0.85172,-0.0434 -1.7277,-0.20855 -2.40625,-0.4375 -0.68569,-0.22201 -1.1896,-0.44339 -1.3125,-0.5 0.16959,0.10899 0.4319,0.40965 -0.21875,1.03125 -0.91079,0.87014 -6.25021,1.39152 -9.25,1.5625 -2.98633,0.17021 -6.57381,-0.31577 -10.96875,-2.28125 -4.42489,-1.97888 -5.60596,-3.22819 -10.84375,-5.375 4.70997,2.38767 6.27017,4.38873 10.3125,6.34375 1.66715,0.80631 3.46043,1.39658 5.21875,1.78125 -0.46163,0.2487 -1.597,0.71225 -3.6875,1.03125 -2.8756,0.43876 -6.7804,0.7331 -8.40625,0.6875 -1.53823,-0.0431 -3.2328,-0.74522 -3.53125,-0.875 0.16833,0.11282 0.41057,0.41375 -0.21875,1.03125 -0.90812,0.8911 -6.20295,1.52825 -9.1875,1.8125 -2.97118,0.28298 -6.57342,-0.1758 -10.9375,-1.9375 -3.95934,-1.59831 -5.32915,-2.79487 -9.34375,-4.3125 3e-5,0 0,0.15625 0,0.15625 3.5959,1.81135 5.23831,3.58233 8.8125,5.15625 1.72207,0.75835 3.58748,1.28895 5.40625,1.625 -0.53609,0.27908 -1.56658,0.68763 -3.4375,1.0625 -2.85539,0.5721 -6.78942,1.01939 -8.40625,1.03125 -0.84451,0.006 -1.70608,-0.0809 -2.375,-0.25 -0.67591,-0.16151 -1.16009,-0.32923 -1.28125,-0.375 0.16722,0.094 0.42267,0.38348 -0.21875,1.0625 -0.89787,0.95052 -6.18648,1.91708 -9.125,2.4375 -2.92534,0.51809 -6.43215,0.37424 -10.71875,-1.03125 -4.3158,-1.41507 -5.47277,-2.52994 -10.5625,-3.96875 4.57685,1.75101 6.08855,3.56006 10.03125,5 1.62608,0.59389 3.36885,0.95565 5.09375,1.15625 -0.45285,0.29702 -1.55478,0.88339 -3.59375,1.46875 -2.80472,0.80517 -6.63886,1.57583 -8.21875,1.75 -1.49475,0.1648 -3.11623,-0.31681 -3.40625,-0.40625 0.16356,0.0901 0.39278,0.35993 -0.21875,1.0625 -0.88247,1.01385 -6.04452,2.37165 -8.9375,3.0625 -2.88002,0.68778 -6.3356,0.76002 -10.5625,-0.4375 -3.83485,-1.08645 -5.17258,-2.07237 -9.0625,-3.125 -10e-6,0 0,0.15625 0,0.15625 3.48418,1.39485 5.06941,2.9194 8.53125,4.03125 1.66793,0.53572 3.45578,0.78674 5.21875,0.875 -0.51964,0.35212 -1.50039,0.91452 -3.3125,1.53125 -2.76566,0.94125 -6.59024,1.93537 -8.15625,2.15625 -0.81794,0.11539 -1.6331,0.12283 -2.28125,0.0312 -0.65496,-0.0832 -1.1326,-0.21827 -1.25,-0.25 0.16204,0.0746 0.43399,0.34044 -0.1875,1.09375 -0.87,1.05453 -6.00963,2.65925 -8.875,3.4375 -2.85253,0.77476 -6.25912,0.9582 -10.4375,-0.0937 -4.20683,-1.05913 -5.35669,-2.04166 -10.34375,-3.15625 4.48454,1.45946 5.96935,3.13523 9.8125,4.25 1.58504,0.45977 3.28679,0.63825 4.96875,0.6875 -0.44157,0.33676 -1.51251,1.02773 -3.5,1.78125 -2.73393,1.03649 -6.45198,2.16269 -8,2.4375 -1.46462,0.26002 -3.05958,-0.11654 -3.34375,-0.1875 0.16025,0.0796 0.38044,0.32098 -0.21875,1.0625 -0.86466,1.07006 -5.91652,2.81815 -8.75,3.6875 -2.8208,0.86547 -6.2075,1.15631 -10.34375,0.21875 -3.75259,-0.85061 -5.04785,-1.71647 -8.875,-2.59375 0,0 0,0.15625 0,0.15625 3.42796,1.23779 4.98741,2.6323 8.375,3.53125 1.63216,0.43314 3.36704,0.58301 5.09375,0.5625 -0.50893,0.38417 -1.47675,1.02182 -3.25,1.75 -2.70634,1.11134 -6.43633,2.30781 -7.96875,2.625 -0.8004,0.16569 -1.61231,0.21862 -2.25,0.15625 0,0 0,0.51552 0,0.92229 0,0.26507 0,0.48396 0,0.48396 0.22645,-0.14468 0.44891,-0.27261 0.71875,-0.375 1.08052,-0.40998 2.17161,-0.21577 6,-1.6875 3.82843,-1.47174 5.22412,-2.00498 5.90625,-2.40625 0.6796,-0.39978 1.61165,-0.87937 2.21875,-1.53125 1.82685,-0.13775 3.57075,-0.49323 4.9375,-1 2.96812,-1.10052 4.87537,-1.80619 6.78125,-2.46875 1.90586,-0.66254 2.35409,-1.41487 3.40625,-1.78125 1.09155,-0.38011 2.19511,-0.16538 6.0625,-1.53125 3.86745,-1.36586 5.28316,-1.82708 5.96875,-2.21875 0.70109,-0.40052 1.70081,-0.93298 2.3125,-1.59375 1.9708,-0.0547 3.81685,-0.38463 5.28125,-0.875 3.00148,-1.00508 4.92615,-1.62171 6.84375,-2.25 1.5386,-0.5041 2.17402,-1.04677 2.90625,-1.4375 0.23016,-0.13431 0.47574,-0.25373 0.75,-0.34375 1.09823,-0.36048 2.18145,-0.0814 6.09375,-1.3125 3.91233,-1.23113 5.36605,-1.67295 6.0625,-2.03125 0.69388,-0.35697 1.63015,-0.79261 2.25,-1.40625 1.86521,-0.0227 3.63581,-0.26683 5.03125,-0.6875 3.03043,-0.91354 4.99238,-1.4301 6.9375,-1.96875 1.94511,-0.53864 2.42618,-1.26452 3.5,-1.5625 1.11401,-0.30915 2.21994,0.007 6.1875,-1.03125 3.96761,-1.03863 5.41758,-1.43273 6.125,-1.75 0.73487,-0.32959 1.81383,-0.75372 2.4375,-1.375 1.99774,0.116 3.85743,-0.0201 5.34375,-0.375 3.07811,-0.735 5.08344,-1.10094 7.0625,-1.5 1.58792,-0.32018 2.24429,-0.79055 3,-1.09375 0.23757,-0.1068 0.46695,-0.19276 0.75,-0.25 1.13347,-0.22919 2.30448,0.20893 6.34375,-0.5 4.03933,-0.70893 5.50025,-0.92709 6.21875,-1.1875 0.71586,-0.25944 1.70428,-0.56724 2.34375,-1.09375 1.92427,0.23949 3.74788,0.22453 5.1875,0 3.12633,-0.48762 5.15455,-0.70067 7.15625,-0.96875 2.00171,-0.26807 2.48869,-0.94514 3.59375,-1.09375 1.14639,-0.15418 2.27592,0.30157 6.34375,-0.21875 4.06784,-0.52032 5.56013,-0.69573 6.28125,-0.9375 0.7371,-0.24714 1.79809,-0.58623 2.4375,-1.125 2.05007,0.33553 3.97378,0.39796 5.5,0.21875 3.14231,-0.36896 5.17994,-0.55936 7.1875,-0.78125 1.61076,-0.17802 2.26467,-0.6082 3.03125,-0.84375 0.24094,-0.0855 0.49412,-0.1556 0.78125,-0.1875 1.14978,-0.12772 2.30129,0.34665 6.375,-0.125 4.07374,-0.47165 5.55909,-0.6106 6.28125,-0.84375 0.71946,-0.23227 1.70024,-0.47346 2.34375,-0.96875 1.93637,0.33346 3.77006,0.40424 5.21875,0.25 3.14602,-0.33495 5.17756,-0.51859 7.1875,-0.71875 2.00996,-0.20014 2.48414,-0.82639 3.59375,-0.9375 1.15114,-0.11528 2.29643,0.36506 6.375,-0.0625 4.07861,-0.42756 5.58886,-0.56209 6.3125,-0.78125 0.73915,-0.22386 1.79572,-0.51325 2.4375,-1.03125 2.0571,0.39867 4.00187,0.4934 5.53125,0.34375 3.14873,-0.3081 5.17584,-0.47325 7.1875,-0.65625 1.61407,-0.14682 2.2631,-0.56055 3.03125,-0.78125 0.24142,-0.0809 0.49353,-0.12991 0.78125,-0.15625 1.15211,-0.10545 2.29296,0.39275 6.375,0 4.08208,-0.39275 5.5889,-0.53084 6.3125,-0.75 0.7209,-0.21833 1.6997,-0.4477 2.3438,-0.9375 1.938,0.34999 3.7688,0.45438 5.2187,0.3125 3.1487,-0.3081 5.1758,-0.47325 7.1875,-0.65625 2.0116,-0.18299 2.5142,-0.83802 3.625,-0.9375 1.1523,-0.10323 2.2922,0.38483 6.375,0 4.0829,-0.38482 5.5887,-0.501 6.3125,-0.71875 0.7393,-0.22243 1.7956,-0.51449 2.4375,-1.03125 2.0574,0.40177 4.0029,0.50333 5.5313,0.34375 3.1466,-0.32852 5.1771,-0.5227 7.1875,-0.71875 1.613,-0.15729 2.2656,-0.63148 3.0312,-0.875 0.2407,-0.088 0.4632,-0.12137 0.75,-0.15625 1.1483,-0.1397 2.3167,0.33991 6.375,-0.25 4.0583,-0.58992 5.5618,-0.77714 6.2813,-1.03125 0.7167,-0.25316 1.6745,-0.55807 2.3125,-1.09375 1.9197,0.21194 3.7199,0.15141 5.1562,-0.0937 3.1191,-0.5324 5.1116,-0.92861 7.0938,-1.3125 1.9821,-0.38387 2.4743,-1.03965 3.5625,-1.28125 1.1288,-0.25066 2.2703,0.11629 6.25,-0.875 3.9796,-0.99128 5.4296,-1.4193 6.125,-1.78125 0.7223,-0.37601 1.7619,-0.87058 2.375,-1.53125 1.963,-0.012 3.7937,-0.29105 5.2187,-0.84375 2.9512,-1.14461 4.8732,-1.86942 6.6875,-2.75 1.4557,-0.70653 2.3348,-1.68641 2.5469,-1.98438 0.2122,-0.29796 0.1118,-0.7453 0.1379,-0.76675 0.043,-0.0352 0.3193,-0.085 0.479,-0.42844 0.8589,-1.84708 2.321,-5.64459 2.4352,-6.32945 0.1137,-0.68216 0.1638,-1.34774 0.2145,-1.74497 0.029,-0.22952 -0.1467,-0.86544 -0.1246,-0.92404 0.031,-0.0821 0.3045,-0.26528 0.3599,-0.51471 0.2663,-1.19833 0.089,-2.19129 -0.1251,-3.60893 -0.214,-1.41764 -0.9837,-4.62214 -1.6369,-5.47626 -0.6589,-0.86172 -1.2229,-1.01117 -1.7479,-1.00066 -0.2086,0.26976 0.1368,0.26309 0.1626,0.31261 0.6806,0.0508 0.934,0.36864 1.4192,0.89662 0.4852,0.52798 1.2218,3.85117 1.3584,5.30156 0.1366,1.45039 0.19,2.8602 -0.088,3.46864 -0.2781,0.60845 -0.7232,0.51703 -1.0156,0.58291 0.531,0.18589 0.6698,0.12483 0.7314,0.96929 0.059,0.81338 -0.1332,1.63969 -0.5198,2.80562 -0.3912,1.18001 -1.8452,4.34998 -2.2857,4.59877 -0.4523,0.25551 -0.7314,0.27038 -1.067,0.13944 z"
- style="display:inline;opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter7337-2);enable-background:new"
- sodipodi:nodetypes="cssscscsscsssccscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssccscsscscssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsszsszssszzcczzzczzzc" />
- <path
- inkscape:connector-curvature="0"
- id="path8183-3"
- d="m 988.75,-263.84375 c 1.91161,0.6344 4.55027,1.75841 6.125,2.8125 1.57477,1.05409 2.8961,1.48252 5.5313,3.375 2.6082,1.87314 5.0269,3.01522 7.3125,4.0625 2.4693,1.13147 5.7521,2.15474 9.5312,3.9375 -1.2072,-1.2584 -7.139,-3.36445 -9.0312,-4.1875 -1.8922,-0.82304 -4.128,-1.93049 -6.9375,-3.78125 -2.80961,-1.85075 -3.62224,-2.48154 -6.00005,-3.71875 -2.37782,-1.23719 -4.07988,-1.9492 -6.53125,-2.5 z"
- style="display:inline;opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter7297-4);enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- id="path8185-3"
- d="m 957.5,-260.78125 c 1.91,0.6181 4.58288,1.70934 6.15625,2.75 1.57339,1.04066 2.89608,1.48252 5.53125,3.375 2.60823,1.87315 5.02692,3.01521 7.3125,4.0625 2.46931,1.13147 5.75213,2.15475 9.53125,3.9375 -1.20728,-1.2584 -7.20154,-3.3957 -9.09375,-4.21875 -1.89217,-0.82304 -4.09666,-1.9305 -6.90625,-3.78125 -2.80958,-1.85075 -3.59295,-2.43932 -5.96875,-3.65625 -2.37578,-1.21691 -4.11321,-1.93885 -6.5625,-2.46875 z"
- style="display:inline;opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter7301-5);enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- id="path8187-7"
- d="m 926.09375,-257.375 c 1.90772,0.59745 4.55348,1.66384 6.125,2.6875 1.5715,1.02365 2.87022,1.43971 5.5,3.28125 2.60291,1.82273 5.02887,2.9722 7.3125,4 2.4672,1.11041 5.75535,2.09323 9.53125,3.84375 -1.20623,-1.2481 -7.1719,-3.31809 -9.0625,-4.125 -1.89058,-0.8069 -4.10242,-1.89104 -6.90625,-3.6875 -2.80385,-1.79644 -3.62704,-2.40251 -6,-3.59375 -2.37297,-1.19124 -4.05362,-1.90283 -6.5,-2.40625 z"
- style="display:inline;opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter7305-4);enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- id="path8189-3"
- d="m 894.90625,-253.5625 c 1.90213,0.55355 4.58701,1.58887 6.15625,2.59375 1.56923,1.00487 2.87401,1.40864 5.5,3.21875 2.59912,1.79164 5.00034,2.87189 7.28125,3.875 2.46428,1.08374 5.75984,2.04029 9.53125,3.75 -1.2048,-1.23507 -7.17416,-3.24478 -9.0625,-4.03125 -1.88832,-0.78647 -4.0752,-1.8308 -6.875,-3.59375 -2.79977,-1.76294 -3.59919,-2.36836 -5.96875,-3.53125 -2.36957,-1.16288 -4.12325,-1.83412 -6.5625,-2.28125 z"
- style="display:inline;opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter7309-9);enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- id="path8191-2"
- d="m 863.71875,-248.65625 c 1.88062,0.42909 4.50427,1.38038 6.0625,2.3125 1.55823,0.93211 2.85233,1.25776 5.46875,3 2.58971,1.72444 4.98067,2.70802 7.25,3.625 2.45176,0.99069 5.73959,1.87707 9.5,3.5 -1.20131,-1.20734 -7.15249,-3.06609 -9.03125,-3.78125 -1.87875,-0.71517 -4.0854,-1.68442 -6.875,-3.375 -2.78963,-1.69057 -3.58461,-2.22822 -5.9375,-3.28125 -2.35292,-1.05301 -4.02584,-1.71248 -6.4375,-2 z"
- style="display:inline;opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter7313-2);enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- id="path8193-6"
- d="m 833.15625,-241.375 c 1.84836,0.29644 4.46945,0.97632 6,1.78125 1.53058,0.80493 2.81374,1.05573 5.375,2.53125 2.53504,1.46046 4.89068,2.32509 7.125,3.0625 2.41399,0.79668 5.65711,1.46689 9.375,2.84375 -1.18771,-1.12873 -7.08772,-2.58975 -8.9375,-3.15625 -1.84977,-0.5665 -4.00342,-1.37392 -6.75,-2.84375 -2.74657,-1.46983 -3.50136,-1.92028 -5.8125,-2.78125 -2.31115,-0.86095 -4.00471,-1.32009 -6.375,-1.4375 z"
- style="display:inline;opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter7317-7);enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- id="path8195-5"
- d="m 802.90625,-232.3125 c 1.8222,0.21127 4.36576,0.80057 5.875,1.53125 1.50925,0.73066 2.75568,0.92998 5.28125,2.28125 2.49976,1.33746 4.83154,2.04843 7.03125,2.65625 2.37653,0.65667 5.56464,1.07288 9.21875,2.1875 -1.16735,-1.04496 -6.92888,-2.10329 -8.75,-2.5625 -1.82111,-0.45921 -3.95225,-1.12696 -6.65625,-2.4375 -2.70403,-1.31052 -3.47106,-1.7199 -5.75,-2.46875 -2.27895,-0.74883 -3.91325,-1.17931 -6.25,-1.1875 z"
- style="display:inline;opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter7321-5);enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- id="path8197-2"
- d="m 773.1875,-222.1875 c 1.81109,0.1787 4.32059,0.66506 5.8125,1.34375 1.49194,0.67869 2.7534,0.79822 5.25,2.0625 2.47107,1.25138 4.79005,1.89614 6.96875,2.4375 2.35387,0.58488 5.49134,0.89752 9.09375,1.84375 -1.15084,-0.99116 -6.85251,-1.7833 -8.65625,-2.1875 -1.80372,-0.4042 -3.91553,-1.02116 -6.59375,-2.25 -2.67818,-1.22884 -3.40345,-1.61089 -5.65625,-2.28125 -2.25279,-0.67034 -3.89627,-1.00232 -6.21875,-0.96875 z"
- style="display:inline;opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter7329-8);enable-background:new" />
- <path
- inkscape:connector-curvature="0"
- id="path8199-6"
- d="m 743.5625,-211.1875 c 1.79281,0.12911 4.27313,0.54965 5.75,1.1875 1.4769,0.63785 2.7161,0.74156 5.1875,1.9375 2.44618,1.18372 4.72054,1.74666 6.875,2.21875 2.32767,0.51003 5.4196,0.68064 9,1.5625 -1.14379,-0.9706 -6.74759,-1.59065 -8.53125,-1.9375 -1.78367,-0.34684 -3.88285,-0.88756 -6.53125,-2.03125 -2.64841,-1.14368 -3.39495,-1.51631 -5.625,-2.125 -2.23008,-0.60868 -3.82594,-0.90966 -6.125,-0.8125 z"
- style="display:inline;opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;filter:url(#filter7325-2);enable-background:new" />
- </g>
- </g>
- <path
- inkscape:connector-curvature="0"
- style="display:inline;opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 863.87812,475.6679 c 1.64212,-3.218 3.51781,-5.73529 4.86136,-9.84898 0.79872,-3.65789 3.31204,-2.03073 7.26047,-8.3969 1.40193,-2.2395 5.47653,0.39136 8.9651,-2.39911 1.27072,-0.80319 2.88488,-0.40431 4.48256,-0.0631 3.76539,1.31896 5.82576,3.70355 8.33376,5.80837 6.13906,5.97023 20.53414,7.94327 23.48604,6.31346 1.43405,-2.90474 7.88128,-5.40888 12.37437,-11.11168 0.74811,-1.12267 11.72936,-8.74446 14.64721,-6.56599"
- id="path8201-5"
- sodipodi:nodetypes="ccccccccc" />
- <path
- inkscape:connector-curvature="0"
- style="display:inline;opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 888.50059,465.25071 c 7.36341,-3.23297 13.8109,-8.9084 20.70813,-13.38452 3.31057,-1.96954 6.86983,3.21601 10.796,3.59866 2.29773,-0.21813 3.7129,1.20259 5.68211,1.6415 5.15636,1.31779 2.39793,3.86488 9.97526,6.43972 6.15561,1.7204 8.9074,-6.79847 14.89975,-7.3236 4.87739,-0.50299 8.09892,-0.31603 11.61675,-0.25254 3.92696,0.13889 4.07855,-3.4976 6.06092,-5.3033 2.98056,-2.80522 7.15561,-1.84972 10.14485,-4.7409 1.01754,-1.38468 1.95458,-3.01085 2.73459,-5.10809 0.88201,-2.00034 3.04006,0.30598 4.79823,1.26269"
- id="path8203-8"
- sodipodi:nodetypes="ccccccccccc" />
- <path
- inkscape:connector-curvature="0"
- style="display:inline;overflow:visible;visibility:visible;opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter9048-9);enable-background:accumulate"
- d="m 403.27922,1056.3058 56.56854,-42.4264 72.12489,14.1421 -46.66904,52.3259 -53.74012,7.0711 -28.28427,-31.1127 z"
- id="path8994-7" />
- <path
- inkscape:connector-curvature="0"
- style="display:inline;opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 542.27183,1060.5719 c -1.40727,18.8012 -1.1449,32.751 2.08174,49.3033 3.22666,16.5523 16.40609,45.9073 20.33441,63.1837 3.92621,17.2671 2.69413,38.3097 -12.45944,51.1483 -15.31761,12.9774 -42.05128,21.5989 -67.83231,15.7337 -25.78105,-5.8652 -69.54907,-49.2234 -88.59019,-70.2283 -19.11214,-21.0833 -63.76086,-93.8506 -77.93853,-124.2758 -14.17767,-30.4251 -12.65961,-36.7186 -8.11972,-45.52972 -9.36672,-24.5205 -12.41371,-50.06681 -33.71245,-75.57664 30.32547,3.11444 43.88028,26.95633 60.12568,47.13975 -5.52989,-48.07603 -18.05471,-64.4165 -28.37395,-90.7243 29.9943,6.08165 50.57936,31.87239 63.97979,72.7125 9.55415,-3.91791 18.23776,-9.37294 30.18741,-9.0612 -11.2975,-41.6958 -17.94946,-69.91584 -36.68725,-101.06994 53.44196,5.67033 83.65702,80.63932 78.97142,87.9608 9.97797,-2.24399 19.00565,-6.53038 30.43653,-5.65167 -11.24897,-38.34702 -21.04781,-76.8679 -3.65971,-118.64819 0,0 48.28678,65.43688 54.38966,85.80578 6.10287,20.3689 1.51881,38.70051 1.51881,38.70051 0,0 16.95957,31.0853 20.29392,51.09414 3.3731,20.24138 -3.53269,59.10328 -4.94582,77.98328 z"
- id="path4189-9"
- sodipodi:nodetypes="czzzzzzcccccccccczczz" />
- <path
- inkscape:connector-curvature="0"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter3587-1);enable-background:accumulate"
- d="m 719.5,738.69519 18.31177,15.43196 44.41103,-15.38821 23.2772,-25.54375 11.46397,19.22065 30.67161,12.78354 25.09737,5.72837 L 892,723.19519 908.02309,747.02126 947,752.19519 l 10.24541,-6.19852 6.75471,8.6982 25.49988,11.00032 2,-40.5 L 955.94866,710.6576 923.45591,689.1305 883.0038,677.66492 861.69668,662.13148 840,685.19519 755.02878,638.61208 722,676.69519 l -2.5,62 z"
- id="path4191-6"
- sodipodi:nodetypes="cccccccccccccccccccccc"
- clip-path="url(#clipPath3631-6)"
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,995.28646,23.53493)" />
- <path
- inkscape:connector-curvature="0"
- style="display:inline;opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;filter:url(#filter3898-1);enable-background:new"
- d="m 584,696.5 -6.5625,17.15625 c 0,0 -7.81152,20.36488 -15.6875,43.65625 -3.93799,11.64568 -7.88302,24.04145 -10.9375,35.125 -3.05448,11.08355 -5.33586,20.37986 -5.5,28.28125 -0.39807,19.16196 5.74653,34.8883 8.9375,41.75 -0.77153,3.55523 -1.99137,9.45432 -3.34375,18.09375 -1.92042,12.26821 -3.71827,27.15441 -2.375,39.875 1.38209,13.08835 6.81222,28.18765 12.59375,43.03125 5.78153,14.8436 12.05435,29.22711 15.21875,38.03125 6.63206,18.4519 9.99296,31.5763 11.3125,48.5 0.58135,7.4561 -0.24227,20.336 -1.25,33.375 -1.00773,13.039 -2.18661,26.3014 -1.6875,36.9688 0.98911,21.1398 9.32798,46.8347 33.375,57.9374 22.77483,10.5154 55.32682,11.7022 83.4375,-3.4374 16.15992,-8.7034 30.07634,-27.0976 43.375,-46.9063 13.29866,-19.8087 24.96917,-41.0534 31.9375,-54.9063 15.35292,-30.5212 39.39353,-115.46418 45.625,-152.7187 3.01859,-18.04653 3.92166,-29.06555 2.625,-38.03125 -0.97853,-6.76604 -3.82819,-12.1474 -6.875,-16.21875 2.04274,-27.50791 -0.73207,-51.36878 11.96875,-79.40625 L 840.75,763.375 l -23.8125,9.3125 c -17.48975,6.83753 -28.90164,19.04536 -36.59375,32.0625 -0.32251,0.54577 -0.56314,1.10776 -0.875,1.65625 0.22203,-22.51521 4.40784,-37.63759 6.59375,-58.6875 l 1.96875,-19 L 771,737.375 c -30.59449,15.55571 -45.69489,48.19321 -49.71875,90.21875 -4.24532,-0.62547 -8.8314,-1.01965 -13.8125,-0.84375 -0.29149,-39.18036 -0.39629,-67.03685 8.59375,-99.375 l 5.59375,-20.125 -19.4375,7.65625 c -30.90937,12.20394 -47.85954,41.93073 -56.625,68.375 -4.38273,13.22214 -6.74582,25.80121 -7.59375,35.9375 -0.23203,2.77373 -0.31106,5.31132 -0.3125,7.71875 -3.24187,-0.0364 -6.42052,0.13589 -10.0625,0.5 0.0416,-39.00473 -3.48424,-79.75415 -32.28125,-116.5 L 584,696.5 Z m 5.8125,43.8125 c 16.80691,30.64383 17.47451,63.96728 16.9375,99.75 l -0.21875,15.0625 12.03493,-6.53921 c 8.66205,-3.13302 19.56058,-0.22752 31.93382,-0.83579 l 14.67465,9.3566 -6.3309,-25.7941 c -0.0897,-0.22997 -0.22046,-0.41669 -0.25,-0.71875 -0.19951,-2.03986 -0.22232,-5.47307 0.125,-9.625 0.69464,-8.30386 2.78957,-19.58524 6.625,-31.15625 5.15532,-15.55294 13.48801,-31.19248 25.125,-42.53125 -4.68381,28.63798 -3.21559,60.25934 -3.01164,95.80514 l -2.76593,13.26164 15.49632,-7.59803 c 9.0294,-2.75771 17.18897,-0.34996 29.28125,1.09375 l 13.24632,9.44423 L 741.09375,840 c 1.44793,-30.97177 8.22149,-53.67808 20.71875,-68.875 -2.98688,19.77884 -5.43043,41.7848 0.3125,78.34375 l 1.06552,6.37318 -2.93815,11.51685 10.61711,-8.16818 9.18973,10.22198 -1.54828,-10.4636 L 781.9375,852 c 5.70102,-13.21149 10.17282,-26.21337 16.34375,-36.65625 0.95986,-1.62434 2.03153,-3.06436 3.0625,-4.5625 -3.68066,21.15535 -2.42716,40.20815 -4.09375,57.78125 l -4.68014,7.80698 7.39889,0.22427 c 3.22005,3.48361 3.8675,3.85068 4.5625,8.65625 0.695,4.80557 0.31862,14.40035 -2.5625,31.625 -5.56799,33.28792 -31.84562,77.83981 -43.7404,101.4864 -6.60491,13.1304 -18.52833,57.4859 -31.12335,76.2465 -12.59502,18.7605 -28.53137,39.7673 -37.17204,44.4209 -21.49052,11.5742 -44.55594,25.5059 -60.61889,18.0895 -14.37486,-6.637 -23.03969,-21.1927 -23.81407,-37.7433 -0.38311,-8.188 0.61279,-21.3092 1.625,-34.4062 1.01221,-13.0971 11.28891,-22.5708 15.42339,-36.5626 5.37229,-18.1808 -1.44687,-36.5944 -12.5,-53.93745 -6.48655,-10.17778 -23.9768,-24.2579 -29.54839,-38.5625 -5.57159,-14.3046 -10.36751,-29.00315 -11.28125,-37.65625 -0.92621,-8.77113 0.4225,-23.02502 2.21875,-34.5 1.79625,-11.47497 3.84375,-20.28125 3.84375,-20.28125 l 9.42278,-3.6152 -10.48528,-3.8848 c 0,0 -8.49889,-15.3101 -8.09375,-34.8125 0.0711,-3.42316 1.83626,-12.72805 4.71875,-23.1875 2.88249,-10.45945 6.76466,-22.55271 10.625,-33.96875 3.04439,-9.00308 5.78063,-16.60345 8.34375,-23.6875 z"
- id="path4193-0"
- clip-path="url(#clipPath3677-0)"
- sodipodi:nodetypes="ccssscsssssssssssssccccscccccccccsscccccccccccssscccccccccccccccsccccssssssssssssscccsssc"
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,822.28931,10.93589)" />
- <g
- style="display:inline;enable-background:new"
- id="g3617-4"
- clip-path="url(#clipPath3622-5)"
- transform="translate(276,136)">
- <path
- inkscape:connector-curvature="0"
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,-52.200498,74.09707)"
- id="path4195-1"
- d="m -15.66751,843.48852 -49.49748,-15.55635 -26.87005,52.3259 41.01219,45.25484 49.49747,-38.18377 -14.14213,-43.84062 z"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter9024-1);enable-background:accumulate" />
- <path
- inkscape:connector-curvature="0"
- sodipodi:nodetypes="ccccccccccccc"
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,-46.92842,75.511284)"
- id="path4197-0"
- d="m 118.70648,859.93048 -55.154328,-46.66904 -43.84062,36.76955 33.94113,53.74011 -13.596814,85.46203 -39.44536579,28.29217 -41.01220021,11.3137 -2.82842,46.669 56.56854,25.4559 18.943987,-69.65 23.45655,-58.85663 46.347541,-72.61491 16.62,-39.91188 z"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter9020-8);enable-background:accumulate" />
- </g>
- <path
- inkscape:connector-curvature="0"
- style="display:inline;overflow:visible;visibility:visible;opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter9044-0);enable-background:accumulate"
- d="m -70.82184,932.58397 60.81118,-26.87005 100.40916,31.1127 -63.63961,31.11269 -82.02438,-16.97056 -15.55635,-18.38478 z"
- id="path4199-4"
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,229.07158,211.51128)" />
- <path
- inkscape:connector-curvature="0"
- style="display:inline;opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;filter:url(#filter4105-2);enable-background:new"
- d="m 583.0625,715.75 c -12.10609,34.44974 -26.7145,68.53333 -31.75,104.84375 -0.83208,14.92867 4.58915,29.15943 8.84375,43.0625 -5.91624,27.20126 -10.13681,56.89995 1.15625,83.125 13.51717,38.16085 35.00147,75.68215 32.42279,117.46825 -0.9483,29.2942 -9.01444,60.9941 5.38971,88.2817 10.19864,19.3348 33.13956,27.3117 53.96785,27.6676 27.86219,1.1741 56.46261,-11.6216 72.0009,-35.2613 22.59549,-29.3717 41.80051,-61.4973 55.23865,-96.0598 16.89053,-45.506 29.6718,-92.56072 37.93402,-140.3989 1.8244,-12.94106 3.10108,-27.46985 -4.57892,-38.82255 -3.43115,-7.33632 0.0421,-15.56014 -0.68457,-23.30977 0.674,-24.99466 4.01232,-50.66376 16.65332,-72.59648 -17.73313,6.4446 -35.07268,16.55971 -44.00307,33.86425 -3.93508,6.70955 -7.60482,13.57413 -11.37193,20.38575 -3.54999,-30.01408 3.71963,-59.64828 6.78125,-89.28125 -20.16604,9.05463 -36.87672,25.65522 -44.17495,46.682 -6.30463,15.58003 -8.80222,32.31718 -10.26255,49.03675 -8.25334,-1.51925 -16.68447,-2.10155 -25.0625,-1.5 -0.96308,-38.69787 -0.46696,-79.40715 10.96875,-115.90625 -18.68113,6.21776 -35.16621,18.73551 -45.62803,35.38723 -13.85254,20.87979 -21.2614,45.75395 -23.05947,70.61277 0.58534,4.32454 -0.0613,11.84009 -6.34375,9.875 -5.33118,0.0176 -10.62908,0.67883 -15.9375,1.09375 1.14784,-39.38148 -3.34144,-81.6282 -27.0625,-114.21875 -3.06071,-3.63717 -5.63685,-7.68438 -8.625,-11.34375 -0.9375,2.4375 -1.875,4.875 -2.8125,7.3125 z m 7.75,13.84375 c 18.56527,29.29629 22.4825,64.82012 22.125,98.875 0.20409,5.17526 -0.51656,11.8292 0.125,16.0625 12.31856,-6.10275 26.73912,-2.4399 39.78125,-2.1875 2.31712,1.22325 3.1921,1.65243 1.90625,-1.40625 -4.16455,-13.95285 -1.84828,-28.613 1.80504,-42.40764 6.36687,-26.29064 20.62828,-51.08798 42.81996,-67.02986 -8.61709,37.23706 -5.71658,76.56161 -6.09375,113.96875 12.25344,-6.9099 27.27879,-3.44613 40.03125,-0.25 3.39222,3.5348 2.28935,-0.72948 2.1875,-3.8125 -0.48309,-21.37058 4.13133,-43.06963 13.6875,-62.15625 5.96266,-10.68727 14.24338,-19.80379 22.4375,-28.875 -7.87156,33.8381 -9.2029,69.33593 -2.71875,103.5 1.72485,-1.41118 4.60681,-0.45414 5.65625,-0.375 9.68369,-21.23682 16.35112,-45.38062 34.89016,-60.74185 1.87329,-0.37122 -1.44818,8.52495 -1.48391,11.8981 -3.53488,21.84581 -7.17516,44.14234 -8.78421,66.21911 -8.78379,2.34171 2.84835,2.32354 3.46875,4.0625 7.92311,10.5658 4.66299,24.40472 3.63165,36.35334 -7.06405,45.03355 -22.14231,87.36194 -35.95355,130.6798 -12.07476,32.9493 -27.3742,58.8525 -47.88808,87.2015 -10.95257,13.5514 -23.24472,27.8513 -40.84375,32.5 -20.15601,6.2413 -44.20676,10.8769 -62.59956,0.046 -17.28966,-12.3414 -21.02393,-35.7089 -19.26226,-55.6864 0.0488,-15.8262 4.93886,-28.5121 4.4106,-43.4918 -0.53824,-15.2629 -2.29135,-30.5647 -6.54261,-46.8663 -4.25126,-16.30162 -9.04325,-24.91794 -16.11906,-41.57338 -7.24111,-17.04456 -15.07015,-36.74863 -18.20542,-56.28842 -1.74948,-18.62714 2.89171,-37.12262 5.78125,-55.25 3.29623,-2.83696 -1.59799,-5.19659 -2.3125,-8.1875 -7.60113,-17.01508 -8.40747,-36.7749 -2.74234,-54.55998 7.1302,-25.0723 15.76087,-49.63241 24.67984,-74.12752 0.70833,1.30208 1.41667,2.60417 2.125,3.90625 z"
- id="path4201-8"
- sodipodi:nodetypes="ccccccccccccccccccccccccccccccccccccccccccccccccccczzzcccccc"
- clip-path="url(#clipPath4177-4)"
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,822.28931,10.93589)" />
- <path
- inkscape:connector-curvature="0"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter4130-8);enable-background:accumulate"
- d="m 735.05635,733.03834 2.75542,21.08881 44.41103,-15.38821 4.85063,-22.38975 -3.93617,-22.05222 -22.45163,-36.59301 -8.28004,30.30494 -17.34924,45.02944 z"
- id="path4203-7"
- sodipodi:nodetypes="cccccccc"
- clip-path="url(#clipPath3631-6)"
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,995.28646,23.53493)" />
- <path
- inkscape:connector-curvature="0"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter4141-2);enable-background:accumulate"
- d="m 831.81321,730.29452 15.82237,14.90486 20.85473,2.89994 -1.59029,-39.92598 8.32561,-30.50842 -7.16499,-6.34106 -21.69669,20.9424 -14.55074,38.02826 z"
- id="path4205-0"
- sodipodi:nodetypes="cccccccc"
- clip-path="url(#clipPath3631-6)"
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,995.28646,23.53493)" />
- <g
- id="g8317-8"
- style="display:inline;filter:url(#filter8333-2);enable-background:new"
- clip-path="url(#clipPath8338-4)"
- transform="translate(276,136)">
- <path
- inkscape:connector-curvature="0"
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,719.28646,-112.46507)"
- clip-path="none"
- sodipodi:nodetypes="ccccc"
- id="path4209-6"
- d="m 964.00012,754.69487 18.42881,7.46479 9.07107,-36.96447 -14.87031,4.83886 -12.62957,24.66082 z"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate" />
- <rect
- y="757.19519"
- x="-55"
- height="177"
- width="182"
- id="rect8315-2"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate" />
- </g>
- <g
- id="g8346-4"
- style="display:inline;filter:url(#filter8354-2);enable-background:new"
- clip-path="url(#clipPath8359-0)"
- transform="translate(276,136)">
- <path
- inkscape:connector-curvature="0"
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,719.28646,-112.46507)"
- clip-path="none"
- sodipodi:nodetypes="ccccccc"
- id="path4207-7"
- d="m 910.14441,746.31415 32.61295,5.17393 -0.36119,-23.87619 7.18853,-29.68221 -8.45112,-5.26365 -21.82194,26.51077 -9.16723,27.13735 z"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate" />
- <rect
- y="696.19519"
- x="-22"
- height="176"
- width="165"
- id="rect8344-9"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate" />
- </g>
- <path
- inkscape:connector-curvature="0"
- style="display:inline;opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- d="m 1036.164,1071.8338 c 6.7941,18.9028 10.4937,33.2997 11.8903,51.2119 1.3966,17.9123 -3.7827,51.8008 -2.9005,70.6561 0.8818,18.8452 8.1337,40.099 27.3446,48.9689 19.4189,8.9658 49.3193,10.2113 74.1199,-3.1456 24.8006,-13.357 57.401,-70.3255 70.9742,-97.3087 13.6239,-27.0839 38.7611,-114.4974 44.6608,-149.76859 5.8998,-35.27121 2.5506,-41.30077 -4.6174,-49.05549 2.6403,-27.84015 -1.4998,-54.93543 13.1096,-87.18618 -30.249,11.8257 -37.3823,40.1607 -48.3189,65.50508 -8.0009,-50.93293 0.2092,-71.27319 3.3189,-101.21936 -29.0647,14.77791 -42.8615,47.11402 -45,92.85714 -10.9239,-1.3042 -21.3914,-4.43423 -33.5714,-0.71429 -0.264,-46.02334 -1.4635,-76.88941 8.9106,-114.20649 -53.2554,21.02686 -62.9472,106.5941 -56.0535,112.77792 -10.8828,0.535 -21.371,-1.2973 -32.8571,2.85715 0.6389,-42.57135 -0.2605,-84.90861 -30,-122.85715 0,0 -30.958,80.92234 -31.4286,103.57143 -0.4705,22.64909 9.4516,40.16588 9.4516,40.16588 0,0 -8.568,36.74051 -6.2986,58.23223 2.2959,21.74142 20.4429,59.67622 27.2655,78.65812 z"
- id="path8848-3"
- sodipodi:nodetypes="czzzzzzcccccccccczczz" />
- <path
- inkscape:connector-curvature="0"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter3587-1);enable-background:accumulate"
- d="m 719.5,738.69519 18.31177,15.43196 44.41103,-15.38821 23.2772,-25.54375 11.46397,19.22065 30.67161,12.78354 25.09737,5.72837 L 892,723.19519 908.02309,747.02126 947,752.19519 l 10.24541,-6.19852 6.75471,8.6982 25.49988,11.00032 2,-40.5 L 955.94866,710.6576 923.45591,689.1305 883.0038,677.66492 861.69668,662.13148 840,685.19519 755.02878,638.61208 722,676.69519 l -2.5,62 z"
- id="path3635-9"
- sodipodi:nodetypes="cccccccccccccccccccccc"
- clip-path="url(#clipPath3631-6)"
- transform="translate(276,136)" />
- <path
- inkscape:connector-curvature="0"
- transform="translate(450.03125,73.843964)"
- style="display:inline;opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;filter:url(#filter3898-1);enable-background:new"
- d="m 584,696.5 -6.5625,17.15625 c 0,0 -7.81152,20.36488 -15.6875,43.65625 -3.93799,11.64568 -7.88302,24.04145 -10.9375,35.125 -3.05448,11.08355 -5.33586,20.37986 -5.5,28.28125 -0.39807,19.16196 5.74653,34.8883 8.9375,41.75 -0.77153,3.55523 -1.99137,9.45432 -3.34375,18.09375 -1.92042,12.26821 -3.71827,27.15441 -2.375,39.875 1.38209,13.08835 6.81222,28.18765 12.59375,43.03125 5.78153,14.8436 12.05435,29.22711 15.21875,38.03125 6.63206,18.4519 9.99296,31.5763 11.3125,48.5 0.58135,7.4561 -0.24227,20.336 -1.25,33.375 -1.00773,13.039 -2.18661,26.3014 -1.6875,36.9688 0.98911,21.1398 9.32798,46.8347 33.375,57.9374 22.77483,10.5154 55.32682,11.7022 83.4375,-3.4374 16.15992,-8.7034 30.07634,-27.0976 43.375,-46.9063 13.29866,-19.8087 24.96917,-41.0534 31.9375,-54.9063 15.35292,-30.5212 39.39353,-115.46418 45.625,-152.7187 3.01859,-18.04653 3.92166,-29.06555 2.625,-38.03125 -0.97853,-6.76604 -3.82819,-12.1474 -6.875,-16.21875 2.04274,-27.50791 -0.73207,-51.36878 11.96875,-79.40625 L 840.75,763.375 l -23.8125,9.3125 c -17.48975,6.83753 -28.90164,19.04536 -36.59375,32.0625 -0.32251,0.54577 -0.56314,1.10776 -0.875,1.65625 0.22203,-22.51521 4.40784,-37.63759 6.59375,-58.6875 l 1.96875,-19 L 771,737.375 c -30.59449,15.55571 -45.69489,48.19321 -49.71875,90.21875 -4.24532,-0.62547 -8.8314,-1.01965 -13.8125,-0.84375 -0.29149,-39.18036 -0.39629,-67.03685 8.59375,-99.375 l 5.59375,-20.125 -19.4375,7.65625 c -30.90937,12.20394 -47.85954,41.93073 -56.625,68.375 -4.38273,13.22214 -6.74582,25.80121 -7.59375,35.9375 -0.23203,2.77373 -0.31106,5.31132 -0.3125,7.71875 -3.24187,-0.0364 -6.42052,0.13589 -10.0625,0.5 0.0416,-39.00473 -3.48424,-79.75415 -32.28125,-116.5 L 584,696.5 Z m 5.8125,43.8125 c 16.80691,30.64383 17.47451,63.96728 16.9375,99.75 l -0.21875,15.0625 12.03493,-6.53921 c 8.66205,-3.13302 19.56058,-0.22752 31.93382,-0.83579 l 14.67465,9.3566 -6.3309,-25.7941 c -0.0897,-0.22997 -0.22046,-0.41669 -0.25,-0.71875 -0.19951,-2.03986 -0.22232,-5.47307 0.125,-9.625 0.69464,-8.30386 2.78957,-19.58524 6.625,-31.15625 5.15532,-15.55294 13.48801,-31.19248 25.125,-42.53125 -4.68381,28.63798 -3.21559,60.25934 -3.01164,95.80514 l -2.76593,13.26164 15.49632,-7.59803 c 9.0294,-2.75771 17.18897,-0.34996 29.28125,1.09375 l 13.24632,9.44423 L 741.09375,840 c 1.44793,-30.97177 8.22149,-53.67808 20.71875,-68.875 -2.98688,19.77884 -5.43043,41.7848 0.3125,78.34375 l 1.06552,6.37318 -2.93815,11.51685 10.61711,-8.16818 9.18973,10.22198 -1.54828,-10.4636 L 781.9375,852 c 5.70102,-13.21149 10.17282,-26.21337 16.34375,-36.65625 0.95986,-1.62434 2.03153,-3.06436 3.0625,-4.5625 -3.68066,21.15535 -2.42716,40.20815 -4.09375,57.78125 l -4.68014,7.80698 7.39889,0.22427 c 3.22005,3.48361 3.8675,3.85068 4.5625,8.65625 0.695,4.80557 0.31862,14.40035 -2.5625,31.625 -5.56799,33.28792 -31.79272,123.1659 -43.6875,146.8125 -6.60491,13.1304 -18.02998,33.8957 -30.625,52.6563 -12.59502,18.7605 -27.35933,35.5338 -36,40.1874 -21.49052,11.5742 -48.7808,10.2602 -64.84375,2.8438 -14.37486,-6.637 -20.53812,-23.4494 -21.3125,-40 -0.38311,-8.188 0.61279,-21.3092 1.625,-34.4062 1.01221,-13.0971 11.28891,-22.5708 15.42339,-36.5626 5.37229,-18.1808 -1.44687,-36.5944 -12.5,-53.93745 -6.48655,-10.17778 -23.9768,-24.2579 -29.54839,-38.5625 -5.57159,-14.3046 -10.36751,-29.00315 -11.28125,-37.65625 -0.92621,-8.77113 0.4225,-23.02502 2.21875,-34.5 1.79625,-11.47497 3.84375,-20.28125 3.84375,-20.28125 l 9.42278,-3.6152 -10.48528,-3.8848 c 0,0 -8.49889,-15.3101 -8.09375,-34.8125 0.0711,-3.42316 1.83626,-12.72805 4.71875,-23.1875 2.88249,-10.45945 6.76466,-22.55271 10.625,-33.96875 3.04439,-9.00308 5.78063,-16.60345 8.34375,-23.6875 z"
- id="path3669-2"
- clip-path="url(#clipPath3677-0)"
- sodipodi:nodetypes="ccssscsssssssssssssccccscccccccccsscccccccccccssscccccccccccccccsccccssssssssssssscccsssc" />
- <g
- id="g3628-8"
- clip-path="url(#clipPath3636-90)"
- transform="translate(276,136)">
- <path
- inkscape:connector-curvature="0"
- id="path8988-3"
- d="m 824.48651,818.48242 -49.49748,-15.55635 -26.87005,52.3259 41.01219,45.25484 49.49747,-38.18377 -14.14213,-43.84062 z"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter9024-1);enable-background:accumulate" />
- <path
- inkscape:connector-curvature="0"
- id="path8990-0"
- d="m 964.49365,855.25197 -55.15433,-46.66904 -43.84062,36.76955 33.94113,53.74011 7.07106,66.46804 -50.91168,35.35537 -41.0122,11.3137 -2.82842,46.669 56.56854,25.4559 63.63961,-76.3676 24.04163,-94.75227 8.48528,-57.98276 z"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter9020-8);enable-background:accumulate" />
- </g>
- <path
- inkscape:connector-curvature="0"
- style="display:inline;overflow:visible;visibility:visible;opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter9044-0);enable-background:accumulate"
- d="m 1045.3322,1043.5779 60.8112,-26.8701 100.4091,31.1127 -63.6396,31.1127 -82.0244,-16.9706 -15.5563,-18.3847 z"
- id="path8992-1" />
- <path
- inkscape:connector-curvature="0"
- transform="translate(450.03125,73.843964)"
- style="display:inline;opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;filter:url(#filter4185-1);enable-background:new"
- d="m 583.0625,715.75 c -12.10609,34.44974 -26.7145,68.53333 -31.75,104.84375 -0.83208,14.92867 4.58915,29.15943 8.84375,43.0625 -5.91624,27.20126 -10.13681,56.89995 1.15625,83.125 13.51717,38.16085 35.00147,75.68215 32.42279,117.46825 -0.9483,29.2942 -9.01444,60.9941 5.38971,88.2817 10.19864,19.3348 33.13956,27.3117 53.96785,27.6676 27.86219,1.1741 56.46261,-11.6216 72.0009,-35.2613 22.59549,-29.3717 41.80051,-61.4973 55.23865,-96.0598 16.89053,-45.506 29.6718,-92.56072 37.93402,-140.3989 1.8244,-12.94106 3.10108,-27.46985 -4.57892,-38.82255 -3.43115,-7.33632 0.0421,-15.56014 -0.68457,-23.30977 0.674,-24.99466 4.01232,-50.66376 16.65332,-72.59648 -17.73313,6.4446 -35.07268,16.55971 -44.00307,33.86425 -3.93508,6.70955 -7.60482,13.57413 -11.37193,20.38575 -3.54999,-30.01408 3.71963,-59.64828 6.78125,-89.28125 -20.16604,9.05463 -36.87672,25.65522 -44.17495,46.682 -6.30463,15.58003 -8.80222,32.31718 -10.26255,49.03675 -8.25334,-1.51925 -16.68447,-2.10155 -25.0625,-1.5 -0.96308,-38.69787 -0.46696,-79.40715 10.96875,-115.90625 -18.68113,6.21776 -35.16621,18.73551 -45.62803,35.38723 -13.85254,20.87979 -21.2614,45.75395 -23.05947,70.61277 0.58534,4.32454 -0.0613,11.84009 -6.34375,9.875 -5.33118,0.0176 -10.62908,0.67883 -15.9375,1.09375 1.14784,-39.38148 -3.34144,-81.6282 -27.0625,-114.21875 -3.06071,-3.63717 -5.63685,-7.68438 -8.625,-11.34375 -0.9375,2.4375 -1.875,4.875 -2.8125,7.3125 z m 7.75,13.84375 c 18.56527,29.29629 22.4825,64.82012 22.125,98.875 0.20409,5.17526 -0.51656,11.8292 0.125,16.0625 12.31856,-6.10275 26.73912,-2.4399 39.78125,-2.1875 2.31712,1.22325 3.1921,1.65243 1.90625,-1.40625 -4.16455,-13.95285 -1.84828,-28.613 1.80504,-42.40764 6.36687,-26.29064 20.62828,-51.08798 42.81996,-67.02986 -8.61709,37.23706 -5.71658,76.56161 -6.09375,113.96875 12.25344,-6.9099 27.27879,-3.44613 40.03125,-0.25 3.39222,3.5348 2.28935,-0.72948 2.1875,-3.8125 -0.48309,-21.37058 4.13133,-43.06963 13.6875,-62.15625 5.96266,-10.68727 14.24338,-19.80379 22.4375,-28.875 -7.87156,33.8381 -9.2029,69.33593 -2.71875,103.5 1.72485,-1.41118 4.60681,-0.45414 5.65625,-0.375 9.68369,-21.23682 16.35112,-45.38062 34.89016,-60.74185 1.87329,-0.37122 -1.44818,8.52495 -1.48391,11.8981 -3.53488,21.84581 -3.2972,44.17323 -4.90625,66.25 -1.31238,1.37679 2.84835,2.32354 3.46875,4.0625 7.92311,10.5658 3.12294,24.83149 2.0916,36.78011 -7.06405,45.03355 -21.76553,88.37934 -35.57677,131.69714 -12.07476,32.9493 -30.7197,63.08 -51.23358,91.429 -10.95257,13.5514 -23.24472,27.8513 -40.84375,32.5 -20.15601,6.2413 -43.57595,5.1744 -61.96875,-5.6562 -17.28966,-12.3414 -21.02393,-35.7089 -19.26226,-55.6864 0.0488,-15.8262 2.37211,-27.8008 7.91747,-42.8053 5.54535,-15.0045 2.47105,-31.3317 -1.78021,-47.6333 -4.25126,-16.3016 -12.17903,-26.26002 -21.82158,-42.20417 -9.64255,-15.94415 -17.6369,-36.03734 -20.77217,-55.57713 -1.74948,-18.62714 2.89171,-37.12262 5.78125,-55.25 3.29623,-2.83696 -1.59799,-5.19659 -2.3125,-8.1875 -7.60113,-17.01508 -8.40747,-36.7749 -2.74234,-54.55998 7.1302,-25.0723 15.76087,-49.63241 24.67984,-74.12752 0.70833,1.30208 1.41667,2.60417 2.125,3.90625 z"
- id="path4149-7"
- sodipodi:nodetypes="ccccccccccccccccccccccccccccccccccccccccccccccccccczzzcccccc"
- clip-path="url(#clipPath4177-4)" />
- <path
- inkscape:connector-curvature="0"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter4130-8);enable-background:accumulate"
- d="m 735.05635,733.03834 2.75542,21.08881 44.41103,-15.38821 4.85063,-22.38975 -3.93617,-22.05222 -22.45163,-36.59301 -8.28004,30.30494 -17.34924,45.02944 z"
- id="path3902-8"
- sodipodi:nodetypes="cccccccc"
- clip-path="url(#clipPath3631-6)"
- transform="translate(276,136)" />
- <path
- inkscape:connector-curvature="0"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;filter:url(#filter4141-2);enable-background:accumulate"
- d="m 831.81321,730.29452 15.82237,14.90486 20.85473,2.89994 -1.59029,-39.92598 8.32561,-30.50842 -7.16499,-6.34106 -21.69669,20.9424 -14.55074,38.02826 z"
- id="path4135-9"
- sodipodi:nodetypes="cccccccc"
- clip-path="url(#clipPath3631-6)"
- transform="translate(276,136)" />
- <g
- id="g8367-1"
- style="filter:url(#filter8379-0)"
- clip-path="url(#clipPath8392-1)"
- transform="translate(276,136)">
- <path
- inkscape:connector-curvature="0"
- clip-path="none"
- sodipodi:nodetypes="ccccccc"
- id="path4145-5"
- d="m 910.14441,746.31415 32.61295,5.17393 -0.36119,-23.87619 7.18853,-29.68221 -8.45112,-5.26365 -21.82194,26.51077 -9.16723,27.13735 z"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate" />
- <rect
- y="650.19098"
- x="877.51953"
- height="172.53406"
- width="123.03658"
- id="rect8365-4"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate" />
- </g>
- <g
- id="g8400-9"
- style="filter:url(#filter8404-9)"
- clip-path="url(#clipPath8417-4)"
- transform="translate(276,136)">
- <path
- inkscape:connector-curvature="0"
- clip-path="none"
- sodipodi:nodetypes="ccccc"
- id="path4147-2"
- d="m 964.00012,754.69487 18.42881,7.46479 9.07107,-36.96447 -14.87031,4.83886 -12.62957,24.66082 z"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate" />
- <rect
- y="677.06104"
- x="924.89569"
- height="125.1579"
- width="142.12846"
- id="rect8398-5"
- style="display:inline;overflow:visible;visibility:visible;opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;marker:none;marker-start:none;marker-mid:none;marker-end:none;enable-background:accumulate" />
- </g>
- </g>
+ <g transform="matrix(.9991 .27421 -.11493 2.3838 2962.6 1209.8)" clip-path="url(#fx)">
+ <path d="M1056.2-278.8c4.145-1.479 10 3.125 10 3.125.899.28 2.725-.894 2.624-1.686 0 0-1.55-1.86-.374-2.939s5.296 1.507 7.5 1.625 5.562-.23 7-.75 1.113-1.425 2.625-1.75 5.119 1.038 7.06 1.169 4.649.334 5.815-.169.178-1.16 1.875-1.875 7.76-.957 9.625-.125 1.81.52 2.625 3 7.44 5.163-1.125 13.375-59.378 13.786-65.625 2.75 6.23-14.271 10.375-15.75z" enable-background="new" filter="url(#fw)" opacity=".75"/>
+ <path d="M1058.5-275.43c4.145-1.479 10 3.125 10 3.125.899.28 2.725-.894 2.624-1.686 0 0-1.55-1.86-.374-2.939s5.296 1.507 7.5 1.625 5.562-.23 7-.75 1.113-1.425 2.625-1.75 5.119 1.038 7.06 1.169 4.649.334 5.815-.169.178-1.16 1.875-1.875 7.76-.957 9.625-.125 1.81.52 2.625 3 7.44 5.163-1.125 13.375-59.378 13.786-65.625 2.75 6.23-14.271 10.375-15.75z" enable-background="new" filter="url(#fv)" opacity=".75"/>
</g>
- <path
- style="fill:#f8d615;fill-opacity:1;fill-rule:evenodd;stroke:#f8d615;stroke-width:17.84425545;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#Arrow1Send)"
- d="M 544.23337,203.09259 3443.746,100.92806"
- id="path7167"
- inkscape:connector-curvature="0"
- sodipodi:nodetypes="cc" />
- <path
- style="display:inline;fill:#f8d615;fill-opacity:1;fill-rule:evenodd;stroke:#f8d615;stroke-width:18;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#Arrow1Send-4);enable-background:new"
- d="M 527.91203,584.39421 3442.4188,1000.8355"
- id="path7167-9"
- inkscape:connector-curvature="0"
- sodipodi:nodetypes="cc" />
- <text
- xml:space="preserve"
- style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;fill:#f83615;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
- x="80.219048"
- y="107.38741"
- id="text8200"
- sodipodi:linespacing="125%"><tspan
- sodipodi:role="line"
- id="tspan8202"
- x="80.219048"
- y="107.38741"
- style="font-size:50px;fill:#f83615;fill-opacity:1">CROP_DEFAULT</tspan></text>
- <text
- xml:space="preserve"
- style="font-style:normal;font-weight:normal;font-size:45.31394196px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;display:inline;fill:#f80000;fill-opacity:0;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- x="3861.3669"
- y="1281.7198"
- id="text8200-4"
- sodipodi:linespacing="125%"
- transform="scale(0.96105877,1.0405191)"><tspan
- sodipodi:role="line"
- id="tspan8202-5"
- x="3861.3669"
- y="1281.7198"
- style="font-size:56.64243317px;fill:#f80000;fill-opacity:0">COMPOSE_PADDED</tspan></text>
- <text
- xml:space="preserve"
- style="font-style:normal;font-weight:normal;font-size:45.31394196px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;display:inline;fill:#f8d615;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- x="3615.1545"
- y="49.156631"
- id="text8200-4-9"
- sodipodi:linespacing="125%"
- transform="scale(0.96105877,1.0405191)"><tspan
- sodipodi:role="line"
- id="tspan8202-5-3"
- x="3615.1545"
- y="49.156631"
- style="font-size:50px;fill:#f8d615;fill-opacity:1">COMPOSE_ACTIVE</tspan></text>
- <text
- xml:space="preserve"
- style="font-style:normal;font-weight:normal;font-size:45.31394196px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;display:inline;fill:#f83615;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- x="2429.1526"
- y="-3.1657715"
- id="text8200-4-5"
- sodipodi:linespacing="125%"
- transform="scale(0.96105878,1.0405191)"><tspan
- sodipodi:role="line"
- id="tspan8202-5-7"
- x="2429.1526"
- y="-3.1657715"
- style="font-size:49.99999958px;fill:#f83615;fill-opacity:1">COMPOSE_DEFAULT</tspan></text>
- <text
- xml:space="preserve"
- style="font-style:normal;font-weight:normal;font-size:45.31394196px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;display:inline;fill:#f815bb;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- x="3681.5449"
- y="1289.9539"
- id="text8200-4-9-3"
- sodipodi:linespacing="125%"
- transform="scale(0.96105877,1.0405191)"><tspan
- sodipodi:role="line"
- id="tspan8202-5-3-6"
- x="3681.5449"
- y="1289.9539"
- style="font-size:50px;fill:#f815bb;fill-opacity:1">COMPOSE_PADDED</tspan></text>
- <text
- xml:space="preserve"
- style="font-style:normal;font-weight:normal;font-size:50px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;display:inline;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new;"
- x="2438.0618"
- y="1368.4291"
- id="text8200-4-9-3-5"
- sodipodi:linespacing="125%"
- transform="scale(0.96105877,1.0405191)"><tspan
- sodipodi:role="line"
- id="tspan8202-5-3-6-3"
- x="2438.0618"
- y="1368.4291"
- style="font-size:50px;fill:#000000;fill-opacity:1;">COMPOSE_BONDS</tspan></text>
- <text
- xml:space="preserve"
- style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;display:inline;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- x="8.0815096"
- y="1438.8961"
- id="text8200-4-9-3-5-6"
- sodipodi:linespacing="125%"><tspan
- sodipodi:role="line"
- id="tspan8202-5-3-6-3-2"
- x="8.0815096"
- y="1438.8961"
- style="font-size:50px;fill:#000000;fill-opacity:1">CROP_BONDS</tspan></text>
- <text
- xml:space="preserve"
- style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;display:inline;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- x="1455.4426"
- y="-26.808125"
- id="text8200-4-9-3-5-6-9"
- sodipodi:linespacing="125%"><tspan
- sodipodi:role="line"
- id="tspan8202-5-3-6-3-2-1"
- x="1455.4426"
- y="-26.808125"
- style="font-size:50px;fill:#000000;fill-opacity:1">overscan area</tspan></text>
- <text
- xml:space="preserve"
- style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;display:inline;fill:#f8d615;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- x="179.63055"
- y="385.38785"
- id="text8200-4-9-2"
- sodipodi:linespacing="125%"><tspan
- sodipodi:role="line"
- id="tspan8202-5-3-7"
- x="179.63055"
- y="385.38785"
- style="font-size:50px;fill:#f8d615;fill-opacity:1">CROP_ACTIVE</tspan></text>
- <text
- xml:space="preserve"
- style="font-style:normal;font-weight:normal;font-size:40px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;display:inline;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- x="636.67419"
- y="-138.84549"
- id="text8200-4-9-3-5-6-0"
- sodipodi:linespacing="125%"><tspan
- sodipodi:role="line"
- id="tspan8202-5-3-6-3-2-9"
- x="636.67419"
- y="-138.84549"
- style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:70px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';fill:#000000;fill-opacity:1">DATA SOURCE</tspan></text>
- <text
- xml:space="preserve"
- style="font-style:normal;font-weight:normal;font-size:45.31394196px;line-height:125%;font-family:sans-serif;letter-spacing:0px;word-spacing:0px;display:inline;fill:#000000;fill-opacity:1;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;enable-background:new"
- x="3178.7151"
- y="-129.06131"
- id="text8200-4-9-3-5-6-0-3"
- sodipodi:linespacing="125%"
- transform="scale(0.96105877,1.0405191)"><tspan
- sodipodi:role="line"
- id="tspan8202-5-3-6-3-2-9-6"
- x="3178.7151"
- y="-129.06131"
- style="font-style:normal;font-variant:normal;font-weight:bold;font-stretch:normal;font-size:69.99999978px;font-family:sans-serif;-inkscape-font-specification:'sans-serif Bold';fill:#000000;fill-opacity:1">DATA SINK</tspan></text>
- <flowRoot
- xml:space="preserve"
- id="flowRoot7469"
- style="fill:black;stroke:none;stroke-opacity:1;stroke-width:1px;stroke-linejoin:miter;stroke-linecap:butt;fill-opacity:1;font-family:sans-serif;font-style:normal;font-weight:normal;font-size:57.5px;line-height:125%;letter-spacing:0px;word-spacing:0px;"><flowRegion
- id="flowRegion7471"><rect
- id="rect7473"
- width="4297.5474"
- height="1851.537"
- x="-52.635666"
- y="70.623535"
- style="font-size:57.5px;" /></flowRegion><flowPara
- id="flowPara7475"></flowPara></flowRoot> </g>
+ </g>
+ <path d="M3603.7 633.68c-3.826-60.621-16.906-121.51-17.254-181.22-.187-32.048 3.291-63.757 13.834-94.91 36.554-156.68 117.6-203.23 186.99-219.47 87.416-26.435 185.96 43.047 234.7 228.91 54.432 181.72 56.997 414.01 81.07 622.74 29.605 305.05 55.09 614.78 60.735 928.25-3.08 187.6-8.474 396.35-60.847 547.4-48.299 120.83-123.49 120.1-188.13 141.58-91.07 11.17-185.4-38.742-263.27-154.04-65.144-91.037-96.274-272.3-97.832-446.36-8.437-191.66 26.542-369.07 51.914-545.07 7.513-198.58 9.466-398.92 9.708-598.39-.841-77.252-7.13-153.13-11.612-229.41z" enable-background="accumulate" fill="#101414"/>
+ <path transform="matrix(1.0057 0 0 2.3995 3249.4 125.01)" d="M311.83 415.43l9.9 121.62-60.105 136.47 15.556 174.66c15.613 61.879 32.185 98.669 74.376 117.05 4.32-36.24-38.612-142.96-39.243-189.12-.631-46.184 10.83-108.61 30.678-158.3 20.048-50.192 36.897-44.846 42.125-92.593s-17.426-149.39-17.426-149.39l-55.86 39.598z" clip-path="url(#y)" enable-background="accumulate" fill="#fff" filter="url(#fu)" opacity=".25"/>
+ <path d="m3987.6 1371.5s16.85 88.825 28.865 129.46c12.014 40.638 53.027 134.48 53.027 134.48l52.896-306.15" enable-background="accumulate" fill="url(#ft)"/>
+ <path transform="matrix(1.0057 0 0 2.3995 3249.4 125.01)" d="m730.32 536.57c0 8.485 42.548 58.468 42.548 58.468l12.607-28.77-55.154-29.698z" clip-path="url(#fs)" enable-background="accumulate" fill="#fff" filter="url(#fr)" opacity=".08"/>
+ </g>
+ <g transform="matrix(1.0057 0 0 2.3995 3424.4 -24.137)" clip-path="url(#fq)" enable-background="new">
+ <g transform="translate(-174.03 62.156)" filter="url(#aq)">
+ <g filter="url(#g)">
+ <path d="M425.88 476.99c10.805-1.479 24.744 3.354 44.643 3.214s57.453-16.91 82.143-17.143 62.752 12.284 79.286 15 22.848-.158 27.5 7.857 1.927 10.747-10.357 20.714-40.79 12.636-66.071 12.857c-25.282.221-70.381 7.079-95.357 3.93s-56.938-7.824-68.929-17.858-19.851-16.732-17.5-23.929 13.837-3.164 24.643-4.643z" enable-background="new" fill="#fff" fill-rule="evenodd"/>
+ <path d="M343.65 412.6h381.84v181.02H343.65z" enable-background="accumulate" fill="none"/>
+ </g>
+ <g filter="url(#g)">
+ <path d="m861.17 390.2c-10.462 9.714-86.98 19.005-100.71 29.286s-14.753 12.888-12.143 20 6.545 9.406 25.714 8.571 98.571-27.622 98.571-21.429l-11.429-36.429z" enable-background="new" fill="#fff" fill-rule="evenodd"/>
+ <path d="M702.86 344.82h207.89v162.63H702.86z" enable-background="accumulate" fill="none"/>
+ </g>
+ </g>
+ <g enable-background="new" opacity=".18">
+ <g transform="translate(-174.03 62.156)" filter="url(#g)">
+ <path d="M425.88 476.99c10.805-1.479 24.744 3.354 44.643 3.214s57.453-16.91 82.143-17.143 62.752 12.284 79.286 15 22.848-.158 27.5 7.857 1.927 10.747-10.357 20.714-40.79 12.636-66.071 12.857c-25.282.221-70.381 7.079-95.357 3.93s-56.938-7.824-68.929-17.858-19.851-16.732-17.5-23.929 13.837-3.164 24.643-4.643z" enable-background="new" fill="#fff" fill-rule="evenodd"/>
+ <path d="M343.65 412.6h381.84v181.02H343.65z" enable-background="accumulate" fill="none"/>
+ </g>
+ <g transform="translate(-174.03 62.156)" filter="url(#g)">
+ <path d="m861.17 390.2c-10.462 9.714-86.98 19.005-100.71 29.286s-14.753 12.888-12.143 20 6.545 9.406 25.714 8.571 98.571-27.622 98.571-21.429l-11.429-36.429z" enable-background="new" fill="#fff" fill-rule="evenodd"/>
+ <path d="M702.86 344.82h207.89v162.63H702.86z" enable-background="accumulate" fill="none"/>
+ </g>
+ </g>
+ </g>
+ <g transform="matrix(1.0057 0 0 2.3995 2971.9 -201.33)" fill-rule="evenodd">
+ <path transform="translate(276 136)" d="m582.66-7.418l113.14 86.267 108.89 258.8 38.184 207.89 120.21 91.924s-12.728-287.09-19.799-313.96-149.91-393.15-149.91-393.15l-210.72 62.225z" clip-path="url(#fp)" enable-background="accumulate" filter="url(#fo)" opacity=".75"/>
+ <path d="m964.14 239.6s8.677 10.897 24.107 11.964c15.43 1.068 49.722-39.953 70.179-52.143 20.479-12.204 47.046-26.602 63.929-20.357 16.882 6.245 22.158 26.436 27.857 48.036 5.7 21.6 6.719 61.814-2.679 92.857-9.397 31.043-50.502 73.104-65.356 103.39s-11.607 39.821-11.607 39.821" enable-background="accumulate" fill="url(#el)"/>
+ <path d="m1124.5 207.63c-15.893-0.893-49.719 12.106-66.071 24.286-16.439 12.244-29.221 24.114-29.286 52.143-0.065 28.206 13.119 39.076 29.107 46.964s33.686 7.12 51.964-11.786c18.278-18.905 14.286-111.61 14.286-111.61z" enable-background="new" fill="url(#ek)"/>
+ <ellipse transform="matrix(.94347 -.12399 .14401 1.0958 451.95 134.6)" cx="385" cy="237.01" rx="86.429" ry="73.929" clip-path="url(#fn)" enable-background="accumulate" fill="url(#ef)" filter="url(#fm)" opacity=".75"/>
+ <path transform="translate(450.03 73.844)" d="m527.61 407.45s-122.04 38.403-187.51 9.632c-65.473-28.772-74.377-124.72-74.377-124.72s73.382-80.504 129.92-83.615c55.827-3.072 90.574 20.143 114.87 65.852 24.352 45.813 17.101 132.85 17.101 132.85z" enable-background="accumulate" fill="url(#fl)" mask="url(#fk)"/>
+ <path d="m772.17 393.35s36.218-27.382 51.607-35.893c15.177-8.393 25.714-11.607 35.893-11.607l-15.536 66.964" enable-background="accumulate" fill="url(#ee)"/>
+ <circle transform="translate(449.5 74.915)" cx="409.29" cy="306.65" r="36.25" enable-background="accumulate" fill="url(#ed)"/>
+ <path transform="translate(276 136)" d="m311.83 415.43l9.9 121.62-60.105 136.47 15.556 174.66c15.613 61.879 32.185 98.669 74.376 117.05 4.32-36.24 8.682-72.368-31.243-223.12l17.678-69.296 72.125-138.59-42.426-158.39-55.86 39.598z" clip-path="url(#y)" enable-background="accumulate" fill="#fff" filter="url(#fj)" opacity=".3"/>
+ <path d="m635.21 581.13c-14.142 12.728 39.233 34.58 76.368 24.042s104.64-35.564 103.24-79.196c-1.407-43.632-76.368-128.69-76.368-128.69l-103.24 183.85z" enable-background="accumulate" filter="url(#fi)" opacity=".5"/>
+ <circle transform="translate(449.67 74.915)" cx="410" cy="306.65" r="23.214" enable-background="accumulate" fill="url(#ec)"/>
+ <circle transform="translate(452 73.487)" cx="414.29" cy="303.08" r="7.5" enable-background="accumulate" fill="#fff" filter="url(#fh)" stroke="#000" stroke-linejoin="bevel"/>
+ <path d="m789.32 478.35s7.023 19.569-1.071 35-42.323 38.988-67.5 50c-25.31 11.07-85.473 32.964-101.79 41.964-16.461 9.082-18.214 12.679-18.214 12.679s-7.147-19.064 28.75-51.786c36.172-32.972 142.03-48.05 159.82-87.857z" enable-background="accumulate" fill="url(#eb)"/>
+ </g>
+ <g enable-background="new">
+ <g transform="matrix(1.0057 0 0 2.3995 3757 -22.424)" fill-rule="evenodd">
+ <path transform="translate(-329.81)" d="M179.64 267.36c-22.41 39.703-60.616 115.78-69.286 149.64-8.647 33.775-8.772 66.417-.357 86.429 8.36 19.882 26.164 35.633 40.714 41.429-.597-14.376 14.373-43.286 72.857-72.5 58.626-29.285 78.382-27.131 103.57-47.143 25.63-20.362 8.206-79.647 3.214-93.929s-1.236-3.38-1.946-5.093c-10.689-25.816-34.214-54.43-64.483-64.55s-65.018-4.848-84.286 5.714z" clip-path="url(#x)" fill="url(#m)"/>
+ <ellipse transform="rotate(28.068 -88.085 -332.1)" cx="183.57" cy="338.08" rx="64.716" ry="134.01" enable-background="accumulate" fill="url(#dz)"/>
+ <ellipse transform="rotate(28.068 -43.578 -333.81)" cx="183.57" cy="338.08" rx="64.716" ry="134.01" enable-background="accumulate" fill="url(#fg)"/>
+ </g>
+ <path transform="matrix(1.0057 0 0 2.3995 3425.3 -22.424)" d="M179.64 267.36c-22.41 39.703-60.616 115.78-69.286 149.64-8.647 33.775-8.772 66.417-.357 86.429 8.36 19.882 26.164 35.633 40.714 41.429-.597-14.376 14.373-43.286 72.857-72.5 58.626-29.285 78.382-27.131 103.57-47.143 25.63-20.362 8.206-79.647 3.214-93.929s-1.236-3.38-1.946-5.093c-10.689-25.816-34.214-54.43-64.483-64.55s-65.018-4.848-84.286 5.714z" clip-path="url(#x)" enable-background="new" fill="none" filter="url(#hd)" stroke="url(#l)" stroke-width="20.8"/>
+ </g>
+ <g transform="matrix(1.0057 0 0 2.3995 2971.9 -201.33)" fill-rule="evenodd">
+ <circle transform="translate(452.56 72.581)" cx="310.71" cy="398.08" r="19.704" enable-background="accumulate" stroke="#000" stroke-linejoin="bevel"/>
+ <circle transform="translate(450.56 72.581)" cx="310.71" cy="398.08" r="19.704" enable-background="accumulate" fill="url(#m)" filter="url(#hc)" stroke="url(#l)" stroke-width="20.8"/>
+ <circle transform="translate(450.56 72.581)" cx="310.71" cy="398.08" r="19.704" enable-background="accumulate" fill="url(#dy)"/>
+ <ellipse transform="rotate(-4.471 1823.1 -5529.2)" cx="429.57" cy="377.43" rx="72.08" ry="44.548" enable-background="accumulate" fill="url(#dx)" filter="url(#hb)"/>
+ <ellipse transform="matrix(1.4358 -.07 .07 1.4358 235.18 -63.865)" cx="437.7" cy="391.22" rx="36.612" ry="22.627" enable-background="accumulate" fill="url(#dw)" filter="url(#ha)"/>
+ <g transform="translate(450.03 73.844)" enable-background="new" filter="url(#gz)">
+ <circle cx="413.66" cy="401.83" r="3.214" enable-background="accumulate" stroke="url(#dv)"/>
+ <circle transform="translate(13.125 8.125)" cx="413.66" cy="401.83" r="3.214" enable-background="accumulate" stroke="url(#du)"/>
+ <circle transform="translate(32.946 7.5)" cx="413.66" cy="401.83" r="3.214" enable-background="accumulate" stroke="url(#ej)"/>
+ <circle transform="translate(24.911 -10.268)" cx="413.66" cy="401.83" r="3.214" enable-background="accumulate" stroke="url(#ei)"/>
+ <circle transform="translate(47.589 -.625)" cx="413.66" cy="401.83" r="3.214" enable-background="accumulate" stroke="url(#eh)"/>
+ </g>
+ </g>
+ <g fill="none" stroke="#000">
+ <path transform="matrix(1.0057 0 0 2.3995 2971.9 -201.33)" d="M896.2 482.93c.985 4.35 4.537 6.18 7.387 7.892 4.46 2.513 6.52 1.522 9.154-.758 1.602-1.921 10.683-4.698 15.594-7.07 4.33-1.46 8.904-5.36 13.385-8.335 3.395-1.627 5.347.355 7.829 1.01 2.944.717 4.411 2.172 6.06 3.536 2.397 1.175-.927 3.143 3.284 4.293 1.19.218 2.417.577 3.283-.505" enable-background="new"/>
+ <path transform="matrix(1.0057 0 0 2.3995 2971.9 -201.33)" d="M910.85 475.35c2.315-.032 3.178.643 5.493-.82 3.455-3.082 5.402-3.146 7.955-4.42 3.026-1.315 6.535 8.152 10.102 9.849 2.395-.822 1.289 1.794 1.452 2.651.057 2.647 2.807 3.679 4.356 5.43 3.316 2.256 7.375 6.296 11.112 5.303 6.445-2.93 10.28-1.281 16.29-7.386.703-1.182-.585-6.895 3.093-7.198 2.524.254 4.166.05 6.06.569 5.442 2.117 7.738 6.45 14.71 7.955 6.184.966 7.613 3.794 13.89 5.05M876.98 483.52c2.399-.794 6.106 4.192 8.173 7.046.593 2.68 1.154 5.486.758 12.122.785 2.417 2.68 3.03 4.798 3.283 3.117-.537 5.877-1.325 7.324-3.03 1.871-1.942 5.312 2.393 8.08 4.04 3.61 1.912 7.775 1.979 11.87 2.273 1.703-.231 2.37 4.515 3.283 8.08.384 4.379-.886 6.897-1.768 9.85-.294 2.496 2.988 3.53 6.313 4.546 3.183.74 6.545 1.661 9.092 1.767 5.142.875 8.088 2.69 12.122 4.04 2.239.817 3.26 2.243 4.545 3.536" enable-background="new"/>
+ </g>
+ <g transform="matrix(.9991 .27421 -.11493 2.3838 2962.6 1209.8)" enable-background="new" fill-rule="evenodd" mask="url(#gy)">
+ <path d="M1111.48-285.971l-3.937 1.875c-.041.01-.1.02-.125.031-.42.213-.165.1-.657.312-.486.21-1.737.585-4.093 1.47-3.332 1.25-5.805 2.15-7 3.062-1.537.021-3.72.233-5.657.719a227.677 227.677 0 0 1-6.75 1.593c-1.894.42-1.675.642-2.875.875-1.296.252-1.721-.009-5.437.782-3.49.742-8.895 1.93-10.156 2.687-1.584-.18-3.868-.322-5.844-.031-3.04.447-4.916.673-6.844.906-.655.08-1.04.2-1.343.281-.427.132-.686.26-1.375.344-1.312.16-1.763-.157-5.532.281-3.554.413-9.005 1.273-10.25 1.938-1.599-.297-3.857-.534-5.843-.344-3.06.293-4.972.484-6.907.656-1.934.173-1.688.423-2.906.532-1.316.117-1.76-.164-5.531.25-3.542.388-9.008 1.209-10.281 1.875-1.6-.295-3.887-.507-5.875-.313-3.058.3-4.941.48-6.875.656-.658.06-1.04.179-1.344.25-.428.12-.683.218-1.375.282-1.316.12-1.76-.195-5.531.218-3.556.39-9.006 1.24-10.25
+1.907-1.599-.295-3.86-.524-5.844-.313-3.056.325-4.974.526-6.906.719s-1.69.44-2.906.562c-1.315.132-1.763-.164-5.532.282-3.538.418-8.977 1.292-10.25 1.968-1.597-.28-3.86-.42-5.843-.187-3.052.358-4.945.568-6.875.781-.657.073-1.041.173-1.344.25-.427.127-.685.267-1.375.344-1.314.146-1.768-.174-5.531.312-3.55.46-8.979 1.42-10.22 2.125-1.592-.244-3.833-.381-5.812-.125-3.047.395-4.95.649-6.875.907-1.924.257-1.726.493-2.937.656-1.31.176-1.748-.105-5.5.469-3.525.538-8.924 1.699-10.188 2.437-1.588-.203-3.846-.255-5.813.094-3.026.536-4.899.861-6.812 1.187-.65.111-1.014.271-1.313.375-.42.165-.663.332-1.344.469-1.294.262-1.727-.006-5.437.813-3.499.771-8.846 2.382-10.062 3.218-1.563-.077-3.758.086-5.688.594-2.972.783-4.817 1.232-6.687 1.75s-1.667.767-2.844 1.094c-1.272.353-1.697.107-5.344 1.187-3.424 1.015-8.65 2.934-9.875 3.844-1.539.013-3.72.272-5.625.875-2.93.928-4.75 1.459-6.594
+2.063-.626.205-.991.392-1.28.53-.408.215-.654.41-1.313.626-1.255.411-1.686.189-5.281 1.437-3.39 1.178-8.595 3.214-9.782 4.157-1.524.06-3.65.395-5.53 1.062-2.898 1.028-4.7 1.676-6.532 2.313-1.832.637-1.628.848-2.781 1.25-1.247.434-1.664.2-5.22 1.562-3.338 1.28-8.486 3.483-9.687 4.469-1.507.108-3.635.499-5.5 1.219a1047.26 1047.26 0 0 1-6.437 2.469c-.617.233-.997.442-1.281.593v.031l-8 3.188-12.476 3.492 7.93 19.278c-.592 1.973 12.545-4.739 12.545-4.739.227-.144.45-.272.72-.375 1.08-.41 2.17-.215 6-1.687 3.828-1.472 5.223-2.005 5.905-2.406.68-.4 1.612-.88 2.22-1.531 1.826-.138 3.57-.494 4.937-1 2.968-1.1 4.875-1.807 6.78-2.47 1.907-.662 2.355-1.414 3.407-1.78 1.092-.38 2.195-.166 6.063-1.532 3.867-1.366 5.283-1.827 5.968-2.218.702-.4 1.701-.933 2.313-1.594 1.97-.055 3.817-.385 5.281-.875 3.002-1.005 4.926-1.622 6.844-2.25 1.538-.504 2.174-1.047 2.906-1.438.23-.134.476-.253.75-.343 1.098-.36
+2.181-.082 6.094-1.313 3.912-1.231 5.366-1.673 6.062-2.031.694-.357 1.63-.793 2.25-1.406 1.866-.023 3.636-.267 5.032-.688 3.03-.913 4.992-1.43 6.937-1.969 1.945-.538 2.426-1.264 3.5-1.562 1.114-.31 2.22.007 6.188-1.031 3.967-1.039 5.417-1.433 6.125-1.75.734-.33 1.813-.754 2.437-1.375 1.998.116 3.857-.02 5.344-.375 3.078-.735 5.083-1.101 7.062-1.5 1.588-.32 2.245-.79 3-1.094a3.4 3.4 0 0 1 .75-.25c1.134-.23 2.305.209 6.344-.5 4.04-.71 5.5-.927 6.219-1.188.716-.26 1.704-.567 2.344-1.093 1.924.239 3.748.224 5.187 0 3.127-.488 5.155-.701 7.156-.97 2.002-.267 2.49-.944 3.594-1.093 1.147-.154 2.276.302 6.344-.219 4.068-.52 5.56-.695 6.281-.937.737-.247 1.798-.586 2.438-1.125 2.05.335 3.973.398 5.5.218 3.142-.368 5.18-.559 7.187-.78 1.611-.179 2.265-.609 3.031-.845.241-.085.495-.155.782-.187 1.15-.128 2.301.347 6.375-.125s5.559-.61 6.28-.844c.72-.232 1.701-.473 2.345-.969 1.936.334 3.77.405
+5.219.25 3.146-.334 5.177-.518 7.187-.718 2.01-.2 2.484-.827 3.594-.938 1.15-.115 2.296.365 6.375-.062s5.589-.562 6.312-.782c.74-.223 1.796-.513 2.438-1.03 2.057.398 4.002.493 5.531.343 3.149-.308 5.176-.473 7.188-.656 1.614-.147 2.263-.56 3.03-.781.242-.081.494-.13.782-.157 1.152-.105 2.293.393 6.375 0s5.589-.53 6.312-.75c.721-.218 1.7-.447 2.344-.937 1.938.35 3.769.454 5.219.312 3.149-.308 5.176-.473 7.187-.656 2.012-.183 2.515-.838 3.625-.937 1.153-.104 2.293.384 6.375 0 4.083-.385 5.59-.501 6.313-.72.74-.222 1.796-.514 2.437-1.03 2.058.401 4.003.503 5.532.343 3.146-.328 5.177-.522 7.187-.718 1.613-.158 2.266-.632 3.031-.875.241-.088.464-.122.75-.157 1.149-.14 2.317.34 6.375-.25 4.059-.59 5.562-.777 6.282-1.03.716-.254 1.674-.559 2.312-1.095 1.92.212 3.72.152 5.156-.093 3.12-.533 5.112-.929 7.094-1.313 1.982-.384 2.474-1.04 3.563-1.281 1.128-.25 2.27.116 6.25-.875s5.43-1.42
+6.125-1.781c.722-.376 1.761-.87 2.375-1.531 1.963-.012 3.793-.292 5.218-.844 2.952-1.145 4.874-1.87 6.688-2.75 1.456-.707 2.32-1.702 2.531-2 .212-.298.1-.729.125-.75.043-.035.34-.094.5-.438.86-1.847 2.323-5.627 2.438-6.312.113-.682.168-1.353.218-1.75.03-.23-.147-.88-.125-.938.031-.082.289-.25.344-.5.266-1.198.09-2.207-.125-3.625-.214-1.417-.972-4.614-1.625-5.469-.659-.861-1.225-1.01-1.75-1z" enable-background="new" fill="#bcb786"/>
+ <g clip-path="url(#gx)">
+ <path d="M1107.4-284.05c-.419.213-.156.094-.647.306-.486.21-1.724.574-4.08 1.459-3.33 1.25-5.83 2.153-7.026 3.066-1.536.021-3.72.233-5.656.719a227.709 227.709 0 0 1-6.75 1.593c-1.895.42-1.676.643-2.875.875-1.297.252-1.721-.009-5.438.782-3.49.742-8.894 1.93-10.156 2.687-1.583-.18-3.867-.322-5.843-.031-3.04.447-4.917.673-6.844.906-.655.08-1.041.201-1.344.282-.426.131-.686.26-1.375.343-1.311.16-1.762-.157-5.531.282-3.554.413-9.005 1.272-10.25 1.937-1.599-.297-3.858-.534-5.844-.344-3.059.294-4.972.484-6.906.657-1.934.172-1.689.422-2.906.53-1.317.118-1.76-.163-5.532.25-3.541.39-9.007 1.21-10.28 1.876-1.6-.295-3.888-.507-5.876-.313-3.058.3-4.94.48-6.875.657-.657.06-1.04.178-1.343.25-.428.118-.684.218-1.375.28-1.316.121-1.76-.194-5.532.22-3.556.39-9.005 1.239-10.25
+1.906-1.598-.294-3.86-.524-5.843-.313-3.056.326-4.974.526-6.907.719-1.932.192-1.69.44-2.906.562-1.315.132-1.763-.164-5.53.282-3.54.418-8.979 1.292-10.25 1.969-1.599-.282-3.86-.42-5.845-.188-3.052.358-4.945.568-6.875.781-.656.073-1.04.173-1.344.25-.426.127-.684.267-1.375.344-1.313.146-1.767-.174-5.53.313-3.55.458-8.98 1.419-10.22 2.125-1.593-.245-3.834-.382-5.812-.125-3.048.394-4.95.648-6.875.906-1.925.258-1.726.493-2.938.656-1.31.176-1.747-.104-5.5.469-3.524.538-8.923 1.699-10.188 2.437-1.587-.203-3.845-.254-5.812.094-3.026.536-4.9.862-6.813 1.187-.65.111-1.013.271-1.312.375-.42.165-.664.332-1.344.47-1.295.26-1.727-.007-5.438.812-3.498.772-8.846 2.383-10.062 3.219-1.562-.078-3.757.085-5.687.593-2.972.783-4.818 1.232-6.688 1.75s-1.666.768-2.843 1.094c-1.273.353-1.697.107-5.344 1.188-3.425 1.014-8.65 2.933-9.875 3.843-1.539.013-3.72.273-5.625.875-2.931.928-4.75 1.459-6.594
+2.063-.627.205-.992.392-1.281.531-.408.214-.653.409-1.313.625-1.254.412-1.686.19-5.28 1.438-3.39 1.177-8.596 3.213-9.782 4.156-1.524.06-3.65.395-5.531 1.062-2.898 1.029-4.7 1.676-6.531 2.313-1.833.637-1.628.848-2.782 1.25-1.246.434-1.663.2-5.218 1.562-3.34 1.28-8.488 3.483-9.688 4.47-1.507.107-3.636.498-5.5 1.218a1044.752 1044.752 0 0 1-6.437 2.469c-.617.233-.997.442-1.282.593v1.094c.112-.222.386-.817.907-1.094.698-.37 4.813-1.993 6.812-2.718 1.657-.602 4.154-1.329 5.969-1.313.302.003.588.051.844.094 1.842.308 7.468 1.562 7.468 1.562s-6.233-1.646-7.03-1.843c-.191-.048-.536-.07-.97-.063 1.146-.87 4.762-2.393 7.344-3.437 2.839-1.148 3.117-1.252 5.063-1.657 2.008-.417 3.156-.5 3.156-.5s-.082-.6.969-1.125c.705-.351 4.887-1.892 6.906-2.562 1.952-.648 5.057-1.359 6.875-1 1.863.367 7.531 1.812 7.531 1.812s-6.287-1.87-7.094-2.093c-.193-.054-.53-.086-.968-.094 1.158-.833 4.794-2.195 7.406-3.156
+2.87-1.056 3.167-1.162 5.125-1.532 1.853-.35 2.859-.425 3.031-.437.114-.217.377-.81.906-1.063.71-.338 4.926-1.712 6.97-2.312 1.692-.497 4.24-1.037 6.093-.906.308.021.613.097.875.156 1.881.424 7.594 2.031 7.594 2.031s-6.342-2.065-7.157-2.312c-.194-.06-.557-.104-1-.125 1.17-.798 4.863-2.057 7.5-2.938 2.898-.968 3.233-1.003 5.22-1.281 2.049-.287 3.187-.313 3.187-.313s-.073-.607 1-1.062c.72-.306 4.99-1.5 7.062-2 2.003-.483 5.199-.928 7.063-.406 1.91.535 7.719 2.5 7.719 2.5s-6.423-2.424-7.25-2.72c-.198-.07-.583-.14-1.032-.187 1.188-.728 4.916-1.774 7.594-2.5 2.944-.797 3.292-.77 5.313-.906 1.913-.128 2.947-.07 3.125-.062.117-.204.391-.78.937-.97.732-.253 5.079-1.047 7.188-1.374 1.748-.271 4.4-.485 6.312-.094.318.065.605.186.875.281 1.94.69 7.844 3.094 7.844 3.094s-6.535-2.95-7.375-3.312c-.201-.087-.575-.167-1.031-.25 1.206-.633 5.03-1.396 7.75-1.906 2.99-.562 3.3-.53 5.344-.532 2.109-.002
+3.312.125 3.312.125s-.073-.63 1.031-.937c.74-.206 5.126-.834 7.25-1.063 2.053-.22 5.319-.252 7.22.47 1.947.738 7.843 3.374 7.843 3.374s-6.563-3.179-7.406-3.562c-.202-.092-.543-.187-1-.282 1.21-.602 4.984-1.248 7.718-1.656 3.005-.448 3.326-.452 5.375-.406 1.94.043 3.007.194 3.188.219.119-.194.384-.766.937-.907.743-.188 5.155-.734 7.282-.937 1.763-.169 4.42-.234 6.343.25.32.08.604.203.875.312 1.953.784 7.907 3.47 7.907 3.47s-6.592-3.254-7.438-3.657c-.202-.096-.572-.207-1.031-.313 1.214-.574 5.044-1.122 7.781-1.5 3.009-.415 3.323-.442 5.375-.375 2.118.07 3.313.25 3.313.25s-.078-.637 1.03-.906c.745-.18 5.153-.663 7.282-.844 2.059-.174 5.343-.124 7.25.657 1.955.8 7.875 3.53 7.875 3.53s-6.56-3.308-7.406-3.718c-.202-.098-.572-.203-1.031-.312 1.215-.564 5.01-1.115 7.75-1.47 3.01-.389 3.321-.397 5.375-.312 1.944.08 3.006.254 3.187.282.12-.191.383-.746.938-.875.744-.174 5.15-.65 7.28-.813
+1.767-.134 4.45-.126 6.376.375.32.083.603.201.875.313 1.954.8 7.906 3.562 7.906 3.562s-6.591-3.34-7.437-3.75c-.203-.098-.572-.203-1.032-.312 1.215-.564 5.042-1.084 7.782-1.438 3.01-.39 3.352-.429 5.406-.344 2.12.088 3.312.313 3.312.313s-.078-.65 1.032-.906c.744-.173 5.15-.624 7.28-.782 2.061-.152 5.344-.096 7.25.688 1.956.804 7.876 3.5 7.876 3.5s-6.56-3.276-7.406-3.688c-.203-.098-.572-.202-1.032-.312 1.216-.562 5.012-1.128 7.75-1.5 3.01-.41 3.323-.416 5.375-.344 1.943.068 3.008.165 3.188.188.119-.195.384-.73.937-.875.742-.197 5.131-.83 7.25-1.094 1.757-.22 4.406-.333 6.313.031.317.06.606.19.875.281 1.936.661 7.844 2.938 7.844 2.938s-6.537-2.807-7.375-3.156c-.2-.084-.577-.174-1.032-.25 1.204-.651 5.02-1.372 7.72-2 2.966-.69 3.288-.756 5.312-.875 2.088-.124 3.28-.032 3.28-.032s-.086-.632 1-1.03c.73-.269 5.048-1.339 7.126-1.813 2.008-.46 5.168-1.03 7-.625 1.878.414 13.578 3.015 13.578
+3.015s-12.328-3.022-13.141-3.265c-.195-.058-.559-.107-1-.125 1.167-.804 3.514-1.688 6.11-2.703 1.68-.659.923-.377 2.775-1.004 1.754-.594 2.486-1.01 2.63-1.113.347-.207-.355-.122-.544-.042z" enable-background="new" filter="url(#gw)"/>
+ <path d="m1082.6-275.12c1.873 0.393 4.496 1.146 6.031 1.969s2.822 1.056 5.375 2.5c2.527 1.43 4.796 2.007 6.969 2.531 2.348 0.566 5.435 0.715 8.844 1.188-1.09-0.84-6.608-1.173-8.406-1.563-1.8-0.39-3.895-1.016-6.594-2.313-2.7-1.296-3.495-1.799-5.813-2.687-2.318-0.889-4.004-1.383-6.406-1.625z" enable-background="new" filter="url(#gv)"/>
+ <path d="M1051.5-270c1.905.578 4.528 1.616 6.094 2.594 1.565.978 2.88 1.36 5.5 3.125 2.593 1.747 4.986 2.71 7.25 3.594 2.446.955 5.682 1.657 9.406 3.062-1.19-1.138-7.063-2.687-8.938-3.375-1.874-.688-4.081-1.566-6.874-3.281-2.794-1.715-3.574-2.284-5.938-3.406-2.364-1.123-4.057-1.835-6.5-2.313z" enable-background="new" filter="url(#gu)"/>
+ <path d="m1020.2-266.84c1.912 0.638 4.581 1.755 6.156 2.813 1.575 1.057 2.896 1.508 5.531 3.406 2.61 1.878 5.029 3.03 7.313 4.062 2.468 1.116 5.764 2.174 9.531 3.844-1.203-1.222-7.203-3.314-9.094-4.125-1.89-0.81-4.064-1.894-6.874-3.75s-3.622-2.477-6-3.719c-2.379-1.242-4.111-1.975-6.563-2.531z" enable-background="new" filter="url(#gt)"/>
+ <path d="M1110.2-266.89c.15.049.688.631.11 1.484-.81 1.195-5.705 3.325-8.563 4.125-2.845.798-6.29.978-10.562-.375-4.302-1.362-5.47-2.468-10.656-4.312 4.664 2.115 6.195 3.952 10.125 5.344 1.62.574 3.367.94 5.062 1.03-.445.327-1.53.984-3.562 1.595-2.796.84-6.65 1.534-8.25 1.625-1.515.086-3.142-.513-3.438-.625.167.103.374.377-.25 1.03-.899.945-6.147 1.924-9.125 2.25-2.964.326-6.521-.015-10.906-1.905-3.978-1.715-5.339-2.916-9.406-4.75v.156c3.643 2.095 5.284 3.883 8.875 5.562 1.73.81 3.592 1.41 5.406 1.72-.534.286-1.557.71-3.437 1.03-2.87.488-6.81.817-8.438.75-.85-.034-1.728-.184-2.406-.406-.685-.215-1.19-.444-1.312-.5.169.107.43.403-.22 1.031-.909.88-6.245 1.337-9.25 1.47-2.99.131-6.588-.451-11-2.563-4.44-2.127-5.64-3.402-10.905-5.782 4.734 2.597 6.286 4.63 10.344 6.72 1.673.861 3.485 1.493 5.25
+1.937-.463.233-1.59.688-3.688.937-2.886.343-6.834.493-8.468.375-1.547-.111-3.232-.857-3.532-1 .17.12.414.41-.218 1-.913.851-6.244 1.262-9.25 1.375-2.993.113-6.59-.49-11-2.594-4.002-1.908-5.388-3.137-9.47-5.093v.156c3.656 2.204 5.295 4.053 8.907 5.906 1.74.893 3.637 1.528 5.469 1.969-.54.248-1.578.615-3.469.844-2.886.348-6.866.52-8.5.406a9.446 9.446 0 0 1-2.406-.5 12.532 12.532 0 0 1-1.313-.531c.17.112.465.422-.187 1.03-.913.853-6.275 1.294-9.281 1.407-2.993.112-6.594-.528-11-2.594-4.437-2.08-5.647-3.331-10.906-5.656 4.729 2.548 6.29 4.578 10.344 6.625 1.671.844 3.485 1.467 5.25 1.906-.464.235-1.59.684-3.688.938-2.886.348-6.836.57-8.469.469-1.544-.096-3.2-.83-3.5-.97.17.12.382.405-.25 1-.912.861-6.246 1.331-9.25 1.47-2.99.138-6.567-.451-10.969-2.47-3.993-1.83-5.365-3.028-9.437-4.905v.156c3.647 2.133 5.27 3.935 8.875 5.719 1.737.86 3.607 1.45 5.437
+1.875-.54.253-1.55.64-3.437.906-2.88.404-6.838.646-8.469.562a9.36 9.36 0 0 1-2.406-.437 12.971 12.971 0 0 1-1.313-.5c.17.109.432.41-.218 1.031-.911.87-6.25 1.392-9.25 1.563-2.987.17-6.574-.316-10.97-2.282-4.424-1.978-5.605-3.228-10.843-5.375 4.71 2.388 6.27 4.39 10.312 6.344a23.73 23.73 0 0 0 5.218 1.781c-.461.25-1.597.713-3.687 1.032-2.876.438-6.78.733-8.406.687-1.539-.043-3.233-.745-3.532-.875.169.113.411.414-.218 1.031-.908.891-6.203 1.529-9.188 1.813-2.971.283-6.573-.176-10.938-1.938-3.96-1.598-5.329-2.795-9.344-4.312v.156c3.596 1.811 5.239 3.582 8.813 5.156 1.722.759 3.587 1.29 5.406 1.625-.536.28-1.566.688-3.437 1.063-2.856.572-6.79 1.02-8.407 1.031-.844.006-1.706-.08-2.375-.25-.676-.162-1.16-.33-1.28-.375.166.094.422.383-.22 1.062-.897.951-6.186 1.918-9.125 2.438-2.925.518-6.432.374-10.719-1.031-4.315-1.415-5.472-2.53-10.562-3.969 4.577 1.751 6.09 3.56 10.031 5 1.627.594 3.37.956
+5.094 1.156-.453.297-1.555.884-3.594 1.469-2.804.805-6.638 1.576-8.218 1.75-1.495.165-3.117-.317-3.407-.406.164.09.393.36-.218 1.062-.883 1.014-6.045 2.372-8.938 3.063-2.88.687-6.335.76-10.562-.438-3.835-1.086-5.172-2.072-9.062-3.125v.156c3.484 1.395 5.07 2.92 8.53 4.032 1.669.535 3.457.786 5.22.875-.52.352-1.5.914-3.313 1.53-2.765.942-6.59 1.936-8.156 2.157-.818.115-1.633.123-2.281.031-.655-.083-1.133-.218-1.25-.25.162.075.434.34-.188 1.094-.87 1.055-6.01 2.66-8.875 3.438-2.852.774-6.259.958-10.438-.094-4.206-1.06-5.356-2.042-10.344-3.156 4.485 1.46 5.97 3.135 9.813 4.25 1.585.46 3.287.638 4.969.687-.442.337-1.513 1.028-3.5 1.781-2.734 1.037-6.452 2.163-8 2.438-1.465.26-3.06-.117-3.344-.188.16.08.38.321-.219 1.063-.865 1.07-5.916 2.818-8.75 3.687-2.82.866-6.207 1.157-10.344.22-3.753-.852-5.048-1.717-8.875-2.595v.157c3.428 1.237 4.987 2.632 8.375 3.53 1.632.434 3.367.584
+5.094.563-.51.384-1.477 1.022-3.25 1.75-2.706 1.112-6.436 2.308-7.969 2.625-.8.166-1.612.219-2.25.157v1.406c.227-.145.449-.273.719-.375 1.08-.41 2.171-.216 6-1.688 3.828-1.471 5.224-2.005 5.906-2.406.68-.4 1.612-.88 2.219-1.531 1.827-.138 3.57-.493 4.937-1 2.968-1.1 4.876-1.806 6.782-2.469 1.905-.663 2.354-1.415 3.406-1.781 1.091-.38 2.195-.166 6.062-1.531 3.868-1.366 5.283-1.827 5.969-2.22.701-.4 1.7-.932 2.313-1.593 1.97-.055 3.816-.385 5.28-.875 3.002-1.005 4.927-1.622 6.845-2.25 1.538-.504 2.174-1.047 2.906-1.437.23-.135.475-.254.75-.344 1.098-.36 2.181-.082 6.094-1.313 3.912-1.23 5.366-1.673 6.062-2.03.694-.358 1.63-.794 2.25-1.407 1.865-.023 3.636-.267 5.031-.688 3.03-.913 4.993-1.43 6.938-1.968 1.945-.54 2.426-1.265 3.5-1.563 1.114-.31 2.22.007 6.187-1.031 3.968-1.039 5.418-1.433 6.125-1.75.735-.33 1.814-.754 2.438-1.375 1.997.116 3.857-.02 5.344-.375 3.078-.735 5.083-1.101
+7.062-1.5 1.588-.32 2.244-.79 3-1.094.238-.107.467-.193.75-.25 1.134-.23 2.305.209 6.344-.5s5.5-.927 6.219-1.187c.715-.26 1.704-.568 2.343-1.094 1.925.24 3.748.224 5.188 0 3.126-.488 5.155-.7 7.156-.969 2.002-.268 2.489-.945 3.594-1.094 1.146-.154 2.276.302 6.344-.219 4.068-.52 5.56-.695 6.28-.937.738-.247 1.799-.586 2.438-1.125 2.05.335 3.974.398 5.5.219 3.143-.37 5.18-.56 7.188-.782 1.61-.178 2.265-.608 3.031-.843a3.43 3.43 0 0 1 .781-.188c1.15-.128 2.302.347 6.375-.125s5.56-.61 6.282-.844c.719-.232 1.7-.473 2.343-.968 1.937.333 3.77.404 5.22.25 3.145-.335 5.177-.519 7.187-.719 2.01-.2 2.484-.826 3.593-.938 1.152-.115 2.297.366 6.375-.062s5.59-.562 6.313-.781c.74-.224 1.796-.514 2.437-1.031 2.058.398 4.002.493 5.532.343 3.148-.308 5.175-.473 7.187-.656 1.614-.147 2.263-.56 3.031-.781.242-.081.494-.13.782-.156 1.152-.106 2.293.392 6.375 0 4.082-.393 5.589-.531 6.312-.75.721-.219
+1.7-.448 2.344-.938 1.938.35 3.769.454 5.219.313 3.148-.309 5.175-.474 7.187-.657 2.012-.183 2.514-.838 3.625-.937 1.152-.103 2.292.385 6.375 0s5.589-.501 6.313-.719c.739-.222 1.795-.514 2.437-1.031 2.057.402 4.003.503 5.531.344 3.147-.329 5.178-.523 7.188-.72 1.613-.156 2.266-.63 3.031-.874.24-.088.463-.122.75-.156 1.148-.14 2.317.34 6.375-.25 4.058-.59 5.562-.778 6.281-1.032.717-.253 1.675-.558 2.313-1.093 1.92.211 3.72.151 5.156-.094 3.12-.533 5.112-.929 7.094-1.313 1.982-.384 2.474-1.04 3.562-1.28 1.13-.252 2.27.115 6.25-.876s5.43-1.42 6.125-1.781c.723-.376 1.762-.87 2.375-1.531 1.963-.012 3.794-.291 5.22-.844 2.95-1.145 4.872-1.87 6.687-2.75 1.455-.707 2.334-1.686 2.547-1.984.212-.298.111-.746.137-.767.043-.035.32-.085.48-.429.858-1.847 2.32-5.644
+2.435-6.329.113-.682.163-1.348.214-1.745.03-.23-.147-.865-.125-.924.031-.082.305-.265.36-.515.267-1.198.09-2.191-.125-3.609-.214-1.417-.983-4.622-1.637-5.476-.659-.862-1.223-1.011-1.748-1-.208.27.137.262.163.312.68.05.934.369 1.42.897s1.442 3.94 1.579 5.39.19 2.86-.088 3.468c-.278.609-.944.429-1.237.495.531.186.89.213.953 1.057.058.814-.134 1.64-.52 2.806-.391 1.18-1.845 4.35-2.286 4.599-.452.255-.952.182-1.288.05z" enable-background="new" filter="url(#gs)"/>
+ <path d="m988.75-263.84c1.912 0.634 4.55 1.758 6.125 2.813 1.575 1.054 2.896 1.482 5.531 3.375 2.609 1.873 5.027 3.015 7.313 4.062 2.47 1.132 5.752 2.155 9.531 3.938-1.207-1.259-7.139-3.365-9.031-4.188s-4.128-1.93-6.938-3.781-3.622-2.482-6-3.719c-2.377-1.237-4.08-1.95-6.53-2.5z" enable-background="new" filter="url(#gr)"/>
+ <path d="M957.5-260.78c1.91.618 4.583 1.71 6.156 2.75 1.574 1.04 2.896 1.482 5.531 3.375 2.609 1.873 5.027 3.015 7.313 4.063 2.47 1.131 5.752 2.154 9.531 3.937-1.207-1.258-7.201-3.396-9.094-4.219-1.892-.823-4.096-1.93-6.906-3.781-2.81-1.85-3.593-2.44-5.969-3.656s-4.113-1.939-6.562-2.469z" enable-background="new" filter="url(#gq)"/>
+ <path d="M926.09-257.38c1.908.597 4.553 1.664 6.125 2.688 1.571 1.023 2.87 1.44 5.5 3.28 2.603 1.823 5.029 2.973 7.313 4 2.467 1.111 5.755 2.094 9.53 3.845-1.205-1.249-7.171-3.319-9.062-4.125s-4.102-1.891-6.906-3.688c-2.804-1.796-3.627-2.402-6-3.594-2.373-1.191-4.054-1.903-6.5-2.406z" enable-background="new" filter="url(#gp)"/>
+ <path d="M894.91-253.56c1.902.554 4.587 1.589 6.156 2.594s2.874 1.408 5.5 3.219c2.6 1.791 5 2.871 7.281 3.875 2.465 1.083 5.76 2.04 9.532 3.75-1.205-1.236-7.175-3.245-9.063-4.032-1.888-.786-4.075-1.83-6.875-3.593s-3.6-2.369-5.969-3.532c-2.37-1.163-4.123-1.834-6.562-2.28z" enable-background="new" filter="url(#go)"/>
+ <path d="M863.72-248.66c1.88.43 4.504 1.38 6.063 2.313 1.558.932 2.852 1.257 5.468 3 2.59 1.724 4.981 2.708 7.25 3.625 2.452.99 5.74 1.877 9.5 3.5-1.201-1.208-7.152-3.067-9.03-3.782-1.88-.715-4.086-1.684-6.876-3.375s-3.585-2.228-5.937-3.28-4.026-1.713-6.438-2z" enable-background="new" filter="url(#gn)"/>
+ <path d="m833.16-241.38c1.848 0.296 4.47 0.976 6 1.781s2.814 1.056 5.375 2.531c2.535 1.46 4.89 2.326 7.125 3.063 2.414 0.797 5.657 1.467 9.375 2.844-1.188-1.129-7.088-2.59-8.938-3.156-1.85-0.567-4.003-1.374-6.75-2.844-2.746-1.47-3.5-1.92-5.812-2.781-2.311-0.861-4.005-1.32-6.375-1.438z" enable-background="new" filter="url(#gm)"/>
+ <path d="m802.91-232.31c1.822 0.211 4.366 0.8 5.875 1.531 1.51 0.73 2.756 0.93 5.281 2.281 2.5 1.338 4.832 2.049 7.031 2.657 2.377 0.656 5.565 1.073 9.22 2.187-1.168-1.045-6.93-2.103-8.75-2.562-1.822-0.46-3.953-1.127-6.657-2.438s-3.471-1.72-5.75-2.469-3.913-1.179-6.25-1.187z" enable-background="new" filter="url(#gl)"/>
+ <path d="M773.19-222.19c1.811.179 4.32.665 5.813 1.344 1.491.678 2.753.798 5.25 2.062 2.47 1.252 4.79 1.896 6.968 2.438 2.354.585 5.492.897 9.094 1.844-1.15-.992-6.852-1.784-8.656-2.188s-3.916-1.021-6.594-2.25c-2.678-1.229-3.403-1.61-5.656-2.281-2.253-.67-3.896-1.002-6.219-.969z" enable-background="new" filter="url(#gk)"/>
+ <path d="M743.56-211.19c1.793.13 4.273.55 5.75 1.188s2.716.741 5.188 1.937c2.446 1.184 4.72 1.747 6.874 2.219 2.328.51 5.42.68 9 1.562-1.143-.97-6.747-1.59-8.53-1.937-1.784-.347-3.884-.888-6.532-2.031-2.648-1.144-3.395-1.517-5.625-2.125-2.23-.61-3.826-.91-6.125-.813z" enable-background="new" filter="url(#gj)"/>
+ <g fill="#fff" filter="url(#gi)">
+ <path d="M744.94-212.12s7.222-3.223 9.063-3.5 3.352-.003 6 .563c2.647.565 8.735 2.215 11.188 3.374s5.312 3.563 5.312 3.563-7.146-2.78-10.188-3.563-7.645-2.083-10.375-2.312-11 1.875-11 1.875z"/>
+ <path d="m735.47-206.95s3.66-2.223 5.5-2.5 3.665 0.247 6.313 0.813 8.735 2.215 11.188 3.375 6.562 2.125 6.562 2.125-8.396-1.343-11.438-2.125-7.957-2.334-10.688-2.563-7.438 0.875-7.438 0.875zm24.38-10.66s8.544-3.299 10.398-3.458c1.854-0.16 3.642 0.48 6.248 1.212s8.577 2.766 10.95 4.08 6.414 2.537 6.414 2.537-8.294-1.873-11.279-2.848c-2.985-0.974-7.792-2.834-10.503-3.236s-12.228 1.713-12.228 1.713zm15.35-5.62s7.771-2.782 9.628-2.904c1.857-0.12 3.631 0.555 6.222 1.341 2.59 0.787 8.519 2.942 10.864 4.304 2.346 1.362 6.36 2.67 6.36 2.67s-8.253-2.045-11.217-3.08c-2.965-1.035-7.733-2.995-10.434-3.452-2.702-0.458-11.422 1.121-11.422 1.121zm14.44-4.72s8.683-3.52 10.542-3.605 3.62 0.624 6.195 1.46c2.575 0.837 8.46 3.107 10.779 4.514 2.318 1.408 6.307 2.793 6.307 2.793s-8.212-2.204-11.156-3.297-7.673-3.144-10.365-3.654-12.3 1.789-12.3 1.789zm14.86-5.38s7.808-2.583 9.666-2.668c1.86-0.085 3.62
+0.625 6.195 1.461 2.575 0.837 8.46 3.107 10.78 4.514 2.318 1.407 6.307 2.792 6.307 2.792s-8.213-2.204-11.156-3.296-7.673-3.144-10.365-3.654-11.426 0.85-11.426 0.85zm15.06-4.25s8.558-2.583 10.417-2.668 3.62 0.625 6.195 1.461c2.575 0.837 8.46 3.107 10.779 4.514 2.318 1.407 6.307 2.792 6.307 2.792s-8.212-2.204-11.156-3.296-7.673-3.144-10.365-3.654-12.176 0.85-12.176 0.85zm16.67-5.02s6.967-1.987 8.828-1.968c1.86 0.02 3.579 0.827 6.102 1.807 2.524 0.98 8.272 3.578 10.508 5.113 2.236 1.536 6.14 3.143 6.14 3.143s-8.075-2.662-10.952-3.919c-2.878-1.256-7.484-3.57-10.143-4.231-2.66-0.66-10.482 0.055-10.482 0.055zm14.5-3.4s7.688-2.028 9.548-1.968 3.56 0.902 6.063 1.936c2.502 1.033 8.194 3.752 10.397 5.335 2.203 1.582 6.072 3.272 6.072 3.272s-8.017-2.833-10.868-4.15c-2.85-1.318-7.407-3.73-10.05-4.446s-11.162 0.021-11.162 0.021zm14.09-3.21s8.17-1.97 10.027-1.854c1.857 0.115 3.532 1.01 6.002
+2.118s8.077 3.997 10.23 5.645 5.972 3.454 5.972 3.454-7.928-3.074-10.738-4.476-7.291-3.95-9.913-4.746c-2.621-0.796-11.58-0.141-11.58-0.141zm16.56-2.39s8.085-1.908 9.938-1.737c1.853 0.172 3.5 1.117 5.935 2.3 2.436 1.182 7.952 4.24 10.055 5.953s5.864 3.633 5.864 3.633-7.832-3.312-10.597-4.8-7.168-4.169-9.764-5.044c-2.597-0.876-11.431-0.305-11.431-0.305zm15.2-2.75s7.642-1.428 9.495-1.265c1.854 0.162 3.505 1.1 5.946 2.27s7.973 4.203 10.084 5.905c2.112 1.703 5.881 3.605 5.881 3.605s-7.847-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.788-4.998-2.6-0.863-10.998-0.77-10.998-0.77zm14.87-1.64s8.642-1.553 10.495-1.39c1.854 0.162 3.505 1.1 5.946 2.27s7.972 4.203 10.084 5.905c2.111 1.703 5.88 3.605 5.88 3.605s-7.846-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.787-4.998-2.601-0.863-11.998-0.644-11.998-0.644zm16.25-2.31s7.642-0.865 9.495-0.703c1.854 0.163 3.505 1.1 5.946 2.27s7.973 4.203 10.084
+5.906c2.112 1.702 5.881 3.605 5.881 3.605s-7.847-3.275-10.62-4.749c-2.772-1.474-7.187-4.135-9.788-4.998-2.6-0.862-10.998-1.331-10.998-1.331zm15.13-1.19s8.58-1.49 10.433-1.328c1.854 0.163 3.505 1.1 5.946 2.27s7.972 4.203 10.084 5.906c2.111 1.702 5.88 3.605 5.88 3.605s-7.846-3.275-10.62-4.749c-2.772-1.474-7.187-4.135-9.787-4.998-2.601-0.862-11.935-0.706-11.935-0.706zm16.25-2.06s7.83-0.803 9.683-0.64c1.854 0.162 3.505 1.1 5.946 2.27s7.972 4.203 10.084 5.905c2.111 1.703 5.88 3.605 5.88 3.605s-7.846-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.787-4.998-2.601-0.863-11.185-1.394-11.185-1.394zm15.37-1.25s8.392-1.178 10.245-1.015c1.854 0.162 3.505 1.1 5.946 2.27s7.972 4.203 10.084 5.905c2.111 1.703 5.88 3.605 5.88 3.605s-7.847-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.788-4.998-2.6-0.863-11.748-1.02-11.748-1.02zm16.19-2.06s6.892-0.99 8.745-0.828c1.854 0.163 3.505 1.1 5.946 2.27s7.973 4.203
+10.084 5.906c2.112 1.702 5.881 3.605 5.881 3.605s-7.847-3.275-10.62-4.749-7.188-4.135-9.788-4.998c-2.6-0.862-10.248-1.206-10.248-1.206zm17.16-0.94s6.83-1.178 8.683-1.015c1.854 0.162 3.505 1.1 5.946 2.27 2.44 1.171 7.972 4.203 10.084 5.905 2.111 1.703 5.88 3.605 5.88 3.605s-7.847-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.788-4.998-2.6-0.863-10.185-1.02-10.185-1.02zm16.1-2s6.08-0.428 7.933-0.265c1.854 0.162 3.505 1.1 5.946 2.27 2.44 1.171 7.972 4.203 10.084 5.905 2.111 1.703 5.88 3.605 5.88 3.605s-7.847-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.788-4.998-2.6-0.863-9.435-1.77-9.435-1.77zm15.8-1.37s6.454-0.678 8.308-0.515c1.854 0.162 3.505 1.1 5.946 2.27 2.44 1.171 7.972 4.203 10.084 5.905 2.111 1.703 5.88 3.605 5.88 3.605s-7.847-3.274-10.62-4.748c-2.772-1.474-7.187-4.135-9.788-4.998-2.6-0.863-9.81-1.52-9.81-1.52zm15.6-1.86s5.498-0.91 7.358-0.853c1.86 0.056 3.562 0.896 6.066 1.925
+2.504 1.03 8.2 3.739 10.406 5.318 2.205 1.578 6.078 3.261 6.078 3.261s-8.022-2.819-10.875-4.131c-2.853-1.313-7.413-3.716-10.06-4.429-2.645-0.712-8.973-1.091-8.973-1.091zm17.4-2.46s4.547-1.156 6.408-1.186c1.86-0.03 3.6 0.73 6.149 1.642 2.55 0.912 8.365 3.354 10.64 4.829 2.277 1.474 6.224 2.976 6.224 2.976s-8.145-2.444-11.055-3.623c-2.91-1.178-7.578-3.368-10.253-3.957-2.676-0.588-8.113-0.68-8.113-0.68zm14.5-3.03s5.96-1.774 7.82-1.83c1.86-0.057 3.61 0.68 6.172 1.555 2.562 0.876 2.522 0.857 5.333 1.49 2.797 0.63 7.077 1.513 7.077 1.513s-3.616-0.016-6.792-0.466c-3.116-0.441-7.375-1.698-10.058-2.249-2.684-0.55-9.552-0.013-9.552-0.013z" enable-background="new"/>
+ <path d="M1099.2-279.93c.161.269 11.208-4.6 12.188-4.688.98-.087 2 3.125 2 3.125s-.775-1.504-2.875-1.062-11.301 2.671-11.312 2.625z"/>
+ </g>
+ <path d="M1107.5-284.09c-.419.213-.156.094-.647.306-.486.21-1.724.574-4.08 1.459-3.33 1.25-5.83 2.153-7.026 3.066-1.536.021-3.72.233-5.656.719a227.709 227.709 0 0 1-6.75 1.593c-1.895.42-1.676.643-2.875.875-1.297.252-1.721-.009-5.438.782-3.49.742-8.894 1.93-10.156 2.687-1.583-.18-3.867-.322-5.843-.031-3.04.447-4.917.673-6.844.906-.655.08-1.041.201-1.344.282-.426.131-.686.26-1.375.343-1.311.16-1.762-.157-5.531.282-3.554.413-9.005 1.272-10.25 1.937-1.599-.297-3.858-.534-5.844-.344-3.059.294-4.972.484-6.906.657-1.934.172-1.689.422-2.906.53-1.317.118-1.76-.163-5.532.25-3.541.39-9.007 1.21-10.28 1.876-1.6-.295-3.888-.507-5.876-.313-3.058.3-4.94.48-6.875.657-.657.06-1.04.178-1.343.25-.428.118-.684.218-1.375.28-1.316.121-1.76-.194-5.532.22-3.556.39-9.005 1.239-10.25
+1.906-1.598-.294-3.86-.524-5.843-.313-3.056.326-4.974.526-6.907.719-1.932.192-1.69.44-2.906.562-1.315.132-1.763-.164-5.53.282-3.54.418-8.979 1.292-10.25 1.969-1.599-.282-3.86-.42-5.845-.188-3.052.358-4.945.568-6.875.781-.656.073-1.04.173-1.344.25-.426.127-.684.267-1.375.344-1.313.146-1.767-.174-5.53.313-3.55.458-8.98 1.419-10.22 2.125-1.593-.245-3.834-.382-5.812-.125-3.048.394-4.95.648-6.875.906-1.925.258-1.726.493-2.938.656-1.31.176-1.747-.104-5.5.469-3.524.538-8.923 1.699-10.188 2.437-1.587-.203-3.845-.254-5.812.094-3.026.536-4.9.862-6.813 1.187-.65.111-1.013.271-1.312.375-.42.165-.664.332-1.344.47-1.295.26-1.727-.007-5.438.812-3.498.772-8.846 2.383-10.062 3.219-1.562-.078-3.757.085-5.687.593-2.972.783-4.818 1.232-6.688 1.75s-1.666.768-2.843 1.094c-1.273.353-1.697.107-5.344 1.188-3.425 1.014-8.65 2.933-9.875 3.843-1.539.013-3.72.273-5.625.875-2.931.928-4.75 1.459-6.594
+2.063-.627.205-.992.392-1.281.531-.408.214-.653.409-1.313.625-1.254.412-1.686.19-5.28 1.438-3.39 1.177-8.596 3.213-9.782 4.156-1.524.06-3.65.395-5.531 1.062-2.898 1.029-4.7 1.676-6.531 2.313-1.833.637-1.628.848-2.782 1.25-1.246.434-1.663.2-5.218 1.562-3.34 1.28-8.488 3.483-9.688 4.47-1.507.107-3.636.498-5.5 1.218a1044.752 1044.752 0 0 1-6.437 2.469c-.617.233-.997.442-1.282.593v1.094c.112-.222.386-.817.907-1.094.698-.37 4.813-1.993 6.812-2.718 1.657-.602 4.154-1.329 5.969-1.313.302.003.588.051.844.094 1.842.308 7.468 1.562 7.468 1.562s-6.233-1.646-7.03-1.843c-.191-.048-.536-.07-.97-.063 1.146-.87 4.762-2.393 7.344-3.437 2.839-1.148 3.117-1.252 5.063-1.657 2.008-.417 3.156-.5 3.156-.5s-.082-.6.969-1.125c.705-.351 4.887-1.892 6.906-2.562 1.952-.648 5.057-1.359 6.875-1 1.863.367 7.531 1.812 7.531 1.812s-6.287-1.87-7.094-2.093c-.193-.054-.53-.086-.968-.094 1.158-.833 4.794-2.195 7.406-3.156
+2.87-1.056 3.167-1.162 5.125-1.532 1.853-.35 2.859-.425 3.031-.437.114-.217.377-.81.906-1.063.71-.338 4.926-1.712 6.97-2.312 1.692-.497 4.24-1.037 6.093-.906.308.021.613.097.875.156 1.881.424 7.594 2.031 7.594 2.031s-6.342-2.065-7.157-2.312c-.194-.06-.557-.104-1-.125 1.17-.798 4.863-2.057 7.5-2.938 2.898-.968 3.233-1.003 5.22-1.281 2.049-.287 3.187-.313 3.187-.313s-.073-.607 1-1.062c.72-.306 4.99-1.5 7.062-2 2.003-.483 5.199-.928 7.063-.406 1.91.535 7.719 2.5 7.719 2.5s-6.423-2.424-7.25-2.72c-.198-.07-.583-.14-1.032-.187 1.188-.728 4.916-1.774 7.594-2.5 2.944-.797 3.292-.77 5.313-.906 1.913-.128 2.947-.07 3.125-.062.117-.204.391-.78.937-.97.732-.253 5.079-1.047 7.188-1.374 1.748-.271 4.4-.485 6.312-.094.318.065.605.186.875.281 1.94.69 7.844 3.094 7.844 3.094s-6.535-2.95-7.375-3.312c-.201-.087-.575-.167-1.031-.25 1.206-.633 5.03-1.396 7.75-1.906 2.99-.562 3.3-.53 5.344-.532 2.109-.002
+3.312.125 3.312.125s-.073-.63 1.031-.937c.74-.206 5.126-.834 7.25-1.063 2.053-.22 5.319-.252 7.22.47 1.947.738 7.843 3.374 7.843 3.374s-6.563-3.179-7.406-3.562c-.202-.092-.543-.187-1-.282 1.21-.602 4.984-1.248 7.718-1.656 3.005-.448 3.326-.452 5.375-.406 1.94.043 3.007.194 3.188.219.119-.194.384-.766.937-.907.743-.188 5.155-.734 7.282-.937 1.763-.169 4.42-.234 6.343.25.32.08.604.203.875.312 1.953.784 7.907 3.47 7.907 3.47s-6.592-3.254-7.438-3.657c-.202-.096-.572-.207-1.031-.313 1.214-.574 5.044-1.122 7.781-1.5 3.009-.415 3.323-.442 5.375-.375 2.118.07 3.313.25 3.313.25s-.078-.637 1.03-.906c.745-.18 5.153-.663 7.282-.844 2.059-.174 5.343-.124 7.25.657 1.955.8 7.875 3.53 7.875 3.53s-6.56-3.308-7.406-3.718c-.202-.098-.572-.203-1.031-.312 1.215-.564 5.01-1.115 7.75-1.47 3.01-.389 3.321-.397 5.375-.312 1.944.08 3.006.254 3.187.282.12-.191.383-.746.938-.875.744-.174 5.15-.65 7.28-.813
+1.767-.134 4.45-.126 6.376.375.32.083.603.201.875.313 1.954.8 7.906 3.562 7.906 3.562s-6.591-3.34-7.437-3.75c-.203-.098-.572-.203-1.032-.312 1.215-.564 5.042-1.084 7.782-1.438 3.01-.39 3.352-.429 5.406-.344 2.12.088 3.312.313 3.312.313s-.078-.65 1.032-.906c.744-.173 5.15-.624 7.28-.782 2.061-.152 5.344-.096 7.25.688 1.956.804 7.876 3.5 7.876 3.5s-6.56-3.276-7.406-3.688c-.203-.098-.572-.202-1.032-.312 1.216-.562 5.012-1.128 7.75-1.5 3.01-.41 3.323-.416 5.375-.344 1.943.068 3.008.165 3.188.188.119-.195.384-.73.937-.875.742-.197 5.131-.83 7.25-1.094 1.757-.22 4.406-.333 6.313.031.317.06.606.19.875.281 1.936.661 7.844 2.938 7.844 2.938s-6.537-2.807-7.375-3.156c-.2-.084-.577-.174-1.032-.25 1.204-.651 5.02-1.372 7.72-2 2.966-.69 3.288-.756 5.312-.875 2.088-.124 3.28-.032 3.28-.032s-.086-.632 1-1.03c.73-.269 5.048-1.339 7.126-1.813 2.008-.46 5.168-1.03 7-.625 1.878.414 13.578 3.015 13.578
+3.015s-12.328-3.022-13.141-3.265c-.195-.058-.559-.107-1-.125 1.167-.804 3.514-1.688 6.11-2.703 1.68-.659.923-.377 2.775-1.004 1.754-.594 2.486-1.01 2.63-1.113.347-.207-.355-.122-.544-.042z" enable-background="new" filter="url(#gh)" opacity=".25"/>
+ <path d="m1082.6-275.12c1.873 0.393 4.496 1.146 6.031 1.969s2.822 1.056 5.375 2.5c2.527 1.43 4.796 2.007 6.969 2.531 2.348 0.566 5.435 0.715 8.844 1.188-1.09-0.84-6.608-1.173-8.406-1.563-1.8-0.39-3.895-1.016-6.594-2.313-2.7-1.296-3.495-1.799-5.813-2.687-2.318-0.889-4.004-1.383-6.406-1.625z" enable-background="new" filter="url(#gg)" opacity=".25"/>
+ <path d="M1051.5-270c1.905.578 4.528 1.616 6.094 2.594 1.565.978 2.88 1.36 5.5 3.125 2.593 1.747 4.986 2.71 7.25 3.594 2.446.955 5.682 1.657 9.406 3.062-1.19-1.138-7.063-2.687-8.938-3.375-1.874-.688-4.081-1.566-6.874-3.281-2.794-1.715-3.574-2.284-5.938-3.406-2.364-1.123-4.057-1.835-6.5-2.313z" enable-background="new" filter="url(#gf)" opacity=".25"/>
+ <path d="m1020.2-266.84c1.912 0.638 4.581 1.755 6.156 2.813 1.575 1.057 2.896 1.508 5.531 3.406 2.61 1.878 5.029 3.03 7.313 4.062 2.468 1.116 5.764 2.174 9.531 3.844-1.203-1.222-7.203-3.314-9.094-4.125-1.89-0.81-4.064-1.894-6.874-3.75s-3.622-2.477-6-3.719c-2.379-1.242-4.111-1.975-6.563-2.531z" enable-background="new" filter="url(#ge)" opacity=".25"/>
+ <path d="M1110.2-266.89c.15.049.688.631.11 1.484-.81 1.195-5.705 3.325-8.563 4.125-2.845.798-6.29.978-10.562-.375-4.302-1.362-5.47-2.468-10.656-4.312 4.664 2.115 6.195 3.952 10.125 5.344 1.62.574 3.367.94 5.062 1.03-.445.327-1.53.984-3.562 1.595-2.796.84-6.65 1.534-8.25 1.625-1.515.086-3.142-.513-3.438-.625.167.103.374.377-.25 1.03-.899.945-6.147 1.924-9.125 2.25-2.964.326-6.521-.015-10.906-1.905-3.978-1.715-5.339-2.916-9.406-4.75v.156c3.643 2.095 5.284 3.883 8.875 5.562 1.73.81 3.592 1.41 5.406 1.72-.534.286-1.557.71-3.437 1.03-2.87.488-6.81.817-8.438.75-.85-.034-1.728-.184-2.406-.406-.685-.215-1.19-.444-1.312-.5.169.107.43.403-.22 1.031-.909.88-6.245 1.337-9.25 1.47-2.99.131-6.588-.451-11-2.563-4.44-2.127-5.64-3.402-10.905-5.782 4.734 2.597 6.286 4.63 10.344 6.72 1.673.861 3.485 1.493 5.25
+1.937-.463.233-1.59.688-3.688.937-2.886.343-6.834.493-8.468.375-1.547-.111-3.232-.857-3.532-1 .17.12.414.41-.218 1-.913.851-6.244 1.262-9.25 1.375-2.993.113-6.59-.49-11-2.594-4.002-1.908-5.388-3.137-9.47-5.093v.156c3.656 2.204 5.295 4.053 8.907 5.906 1.74.893 3.637 1.528 5.469 1.969-.54.248-1.578.615-3.469.844-2.886.348-6.866.52-8.5.406a9.446 9.446 0 0 1-2.406-.5 12.532 12.532 0 0 1-1.313-.531c.17.112.465.422-.187 1.03-.913.853-6.275 1.294-9.281 1.407-2.993.112-6.594-.528-11-2.594-4.437-2.08-5.647-3.331-10.906-5.656 4.729 2.548 6.29 4.578 10.344 6.625 1.671.844 3.485 1.467 5.25 1.906-.464.235-1.59.684-3.688.938-2.886.348-6.836.57-8.469.469-1.544-.096-3.2-.83-3.5-.97.17.12.382.405-.25 1-.912.861-6.246 1.331-9.25 1.47-2.99.138-6.567-.451-10.969-2.47-3.993-1.83-5.365-3.028-9.437-4.905v.156c3.647 2.133 5.27 3.935 8.875 5.719 1.737.86 3.607 1.45 5.437
+1.875-.54.253-1.55.64-3.437.906-2.88.404-6.838.646-8.469.562a9.36 9.36 0 0 1-2.406-.437 12.971 12.971 0 0 1-1.313-.5c.17.109.432.41-.218 1.031-.911.87-6.25 1.392-9.25 1.563-2.987.17-6.574-.316-10.97-2.282-4.424-1.978-5.605-3.228-10.843-5.375 4.71 2.388 6.27 4.39 10.312 6.344a23.73 23.73 0 0 0 5.218 1.781c-.461.25-1.597.713-3.687 1.032-2.876.438-6.78.733-8.406.687-1.539-.043-3.233-.745-3.532-.875.169.113.411.414-.218 1.031-.908.891-6.203 1.529-9.188 1.813-2.971.283-6.573-.176-10.938-1.938-3.96-1.598-5.329-2.795-9.344-4.312v.156c3.596 1.811 5.239 3.582 8.813 5.156 1.722.759 3.587 1.29 5.406 1.625-.536.28-1.566.688-3.437 1.063-2.856.572-6.79 1.02-8.407 1.031-.844.006-1.706-.08-2.375-.25-.676-.162-1.16-.33-1.28-.375.166.094.422.383-.22 1.062-.897.951-6.186 1.918-9.125 2.438-2.925.518-6.432.374-10.719-1.031-4.315-1.415-5.472-2.53-10.562-3.969 4.577 1.751 6.09 3.56 10.031 5 1.627.594 3.37.956
+5.094 1.156-.453.297-1.555.884-3.594 1.469-2.804.805-6.638 1.576-8.218 1.75-1.495.165-3.117-.317-3.407-.406.164.09.393.36-.218 1.062-.883 1.014-6.045 2.372-8.938 3.063-2.88.687-6.335.76-10.562-.438-3.835-1.086-5.172-2.072-9.062-3.125v.156c3.484 1.395 5.07 2.92 8.53 4.032 1.669.535 3.457.786 5.22.875-.52.352-1.5.914-3.313 1.53-2.765.942-6.59 1.936-8.156 2.157-.818.115-1.633.123-2.281.031-.655-.083-1.133-.218-1.25-.25.162.075.434.34-.188 1.094-.87 1.055-6.01 2.66-8.875 3.438-2.852.774-6.259.958-10.438-.094-4.206-1.06-5.356-2.042-10.344-3.156 4.485 1.46 5.97 3.135 9.813 4.25 1.585.46 3.287.638 4.969.687-.442.337-1.513 1.028-3.5 1.781-2.734 1.037-6.452 2.163-8 2.438-1.465.26-3.06-.117-3.344-.188.16.08.38.321-.219 1.063-.865 1.07-5.916 2.818-8.75 3.687-2.82.866-6.207 1.157-10.344.22-3.753-.852-5.048-1.717-8.875-2.595v.157c3.428 1.237 4.987 2.632 8.375 3.53 1.632.434 3.367.584
+5.094.563-.51.384-1.477 1.022-3.25 1.75-2.706 1.112-6.436 2.308-7.969 2.625-.8.166-1.612.219-2.25.157v1.406c.227-.145.449-.273.719-.375 1.08-.41 2.171-.216 6-1.688 3.828-1.471 5.224-2.005 5.906-2.406.68-.4 1.612-.88 2.219-1.531 1.827-.138 3.57-.493 4.937-1 2.968-1.1 4.876-1.806 6.782-2.469 1.905-.663 2.354-1.415 3.406-1.781 1.091-.38 2.195-.166 6.062-1.531 3.868-1.366 5.283-1.827 5.969-2.22.701-.4 1.7-.932 2.313-1.593 1.97-.055 3.816-.385 5.28-.875 3.002-1.005 4.927-1.622 6.845-2.25 1.538-.504 2.174-1.047 2.906-1.437.23-.135.475-.254.75-.344 1.098-.36 2.181-.082 6.094-1.313 3.912-1.23 5.366-1.673 6.062-2.03.694-.358 1.63-.794 2.25-1.407 1.865-.023 3.636-.267 5.031-.688 3.03-.913 4.993-1.43 6.938-1.968 1.945-.54 2.426-1.265 3.5-1.563 1.114-.31 2.22.007 6.187-1.031 3.968-1.039 5.418-1.433 6.125-1.75.735-.33 1.814-.754 2.438-1.375 1.997.116 3.857-.02 5.344-.375 3.078-.735 5.083-1.101
+7.062-1.5 1.588-.32 2.244-.79 3-1.094.238-.107.467-.193.75-.25 1.134-.23 2.305.209 6.344-.5s5.5-.927 6.219-1.187c.715-.26 1.704-.568 2.343-1.094 1.925.24 3.748.224 5.188 0 3.126-.488 5.155-.7 7.156-.969 2.002-.268 2.489-.945 3.594-1.094 1.146-.154 2.276.302 6.344-.219 4.068-.52 5.56-.695 6.28-.937.738-.247 1.799-.586 2.438-1.125 2.05.335 3.974.398 5.5.219 3.143-.37 5.18-.56 7.188-.782 1.61-.178 2.265-.608 3.031-.843a3.43 3.43 0 0 1 .781-.188c1.15-.128 2.302.347 6.375-.125s5.56-.61 6.282-.844c.719-.232 1.7-.473 2.343-.968 1.937.333 3.77.404 5.22.25 3.145-.335 5.177-.519 7.187-.719 2.01-.2 2.484-.826 3.593-.938 1.152-.115 2.297.366 6.375-.062s5.59-.562 6.313-.781c.74-.224 1.796-.514 2.437-1.031 2.058.398 4.002.493 5.532.343 3.148-.308 5.175-.473 7.187-.656 1.614-.147 2.263-.56 3.031-.781.242-.081.494-.13.782-.156 1.152-.106 2.293.392 6.375 0 4.082-.393 5.589-.531 6.312-.75.721-.219
+1.7-.448 2.344-.938 1.938.35 3.769.454 5.219.313 3.148-.309 5.175-.474 7.187-.657 2.012-.183 2.514-.838 3.625-.937 1.152-.103 2.292.385 6.375 0s5.589-.501 6.313-.719c.739-.222 1.795-.514 2.437-1.031 2.057.402 4.003.503 5.531.344 3.147-.329 5.178-.523 7.188-.72 1.613-.156 2.266-.63 3.031-.874.24-.088.463-.122.75-.156 1.148-.14 2.317.34 6.375-.25 4.058-.59 5.562-.778 6.281-1.032.717-.253 1.675-.558 2.313-1.093 1.92.211 3.72.151 5.156-.094 3.12-.533 5.112-.929 7.094-1.313 1.982-.384 2.474-1.04 3.562-1.28 1.13-.252 2.27.115 6.25-.876s5.43-1.42 6.125-1.781c.723-.376 1.762-.87 2.375-1.531 1.963-.012 3.794-.291 5.22-.844 2.95-1.145 4.872-1.87 6.687-2.75 1.455-.707 2.334-1.686 2.547-1.984.212-.298.111-.746.137-.767.043-.035.32-.085.48-.429.858-1.847 2.32-5.644
+2.435-6.329.113-.682.163-1.348.214-1.745.03-.23-.147-.865-.125-.924.031-.082.305-.265.36-.515.267-1.198.09-2.191-.125-3.609-.214-1.417-.983-4.622-1.637-5.476-.659-.862-1.223-1.011-1.748-1-.208.27.137.262.163.312.68.05.934.369 1.42.897s1.221 3.85 1.358 5.301.19 2.86-.088 3.469c-.278.608-.723.517-1.016.583.531.186.67.125.732.969.058.813-.134 1.64-.52 2.806-.392 1.18-1.846 4.35-2.286 4.598-.452.256-.731.27-1.067.14z" enable-background="new" filter="url(#ff)" opacity=".25"/>
+ <path d="m988.75-263.84c1.912 0.634 4.55 1.758 6.125 2.813 1.575 1.054 2.896 1.482 5.531 3.375 2.609 1.873 5.027 3.015 7.313 4.062 2.47 1.132 5.752 2.155 9.531 3.938-1.207-1.259-7.139-3.365-9.031-4.188s-4.128-1.93-6.938-3.781-3.622-2.482-6-3.719c-2.377-1.237-4.08-1.95-6.53-2.5z" enable-background="new" filter="url(#fe)" opacity=".25"/>
+ <path d="M957.5-260.78c1.91.618 4.583 1.71 6.156 2.75 1.574 1.04 2.896 1.482 5.531 3.375 2.609 1.873 5.027 3.015 7.313 4.063 2.47 1.131 5.752 2.154 9.531 3.937-1.207-1.258-7.201-3.396-9.094-4.219-1.892-.823-4.096-1.93-6.906-3.781-2.81-1.85-3.593-2.44-5.969-3.656s-4.113-1.939-6.562-2.469z" enable-background="new" filter="url(#fd)" opacity=".25"/>
+ <path d="M926.09-257.38c1.908.597 4.553 1.664 6.125 2.688 1.571 1.023 2.87 1.44 5.5 3.28 2.603 1.823 5.029 2.973 7.313 4 2.467 1.111 5.755 2.094 9.53 3.845-1.205-1.249-7.171-3.319-9.062-4.125s-4.102-1.891-6.906-3.688c-2.804-1.796-3.627-2.402-6-3.594-2.373-1.191-4.054-1.903-6.5-2.406z" enable-background="new" filter="url(#fc)" opacity=".25"/>
+ <path d="M894.91-253.56c1.902.554 4.587 1.589 6.156 2.594s2.874 1.408 5.5 3.219c2.6 1.791 5 2.871 7.281 3.875 2.465 1.083 5.76 2.04 9.532 3.75-1.205-1.236-7.175-3.245-9.063-4.032-1.888-.786-4.075-1.83-6.875-3.593s-3.6-2.369-5.969-3.532c-2.37-1.163-4.123-1.834-6.562-2.28z" enable-background="new" filter="url(#fb)" opacity=".25"/>
+ <path d="M863.72-248.66c1.88.43 4.504 1.38 6.063 2.313 1.558.932 2.852 1.257 5.468 3 2.59 1.724 4.981 2.708 7.25 3.625 2.452.99 5.74 1.877 9.5 3.5-1.201-1.208-7.152-3.067-9.03-3.782-1.88-.715-4.086-1.684-6.876-3.375s-3.585-2.228-5.937-3.28-4.026-1.713-6.438-2z" enable-background="new" filter="url(#fa)" opacity=".25"/>
+ <path d="m833.16-241.38c1.848 0.296 4.47 0.976 6 1.781s2.814 1.056 5.375 2.531c2.535 1.46 4.89 2.326 7.125 3.063 2.414 0.797 5.657 1.467 9.375 2.844-1.188-1.129-7.088-2.59-8.938-3.156-1.85-0.567-4.003-1.374-6.75-2.844-2.746-1.47-3.5-1.92-5.812-2.781-2.311-0.861-4.005-1.32-6.375-1.438z" enable-background="new" filter="url(#ez)" opacity=".25"/>
+ <path d="m802.91-232.31c1.822 0.211 4.366 0.8 5.875 1.531 1.51 0.73 2.756 0.93 5.281 2.281 2.5 1.338 4.832 2.049 7.031 2.657 2.377 0.656 5.565 1.073 9.22 2.187-1.168-1.045-6.93-2.103-8.75-2.562-1.822-0.46-3.953-1.127-6.657-2.438s-3.471-1.72-5.75-2.469-3.913-1.179-6.25-1.187z" enable-background="new" filter="url(#ey)" opacity=".25"/>
+ <path d="M773.19-222.19c1.811.179 4.32.665 5.813 1.344 1.491.678 2.753.798 5.25 2.062 2.47 1.252 4.79 1.896 6.968 2.438 2.354.585 5.492.897 9.094 1.844-1.15-.992-6.852-1.784-8.656-2.188s-3.916-1.021-6.594-2.25c-2.678-1.229-3.403-1.61-5.656-2.281-2.253-.67-3.896-1.002-6.219-.969z" enable-background="new" filter="url(#ex)" opacity=".25"/>
+ <path d="M743.56-211.19c1.793.13 4.273.55 5.75 1.188s2.716.741 5.188 1.937c2.446 1.184 4.72 1.747 6.874 2.219 2.328.51 5.42.68 9 1.562-1.143-.97-6.747-1.59-8.53-1.937-1.784-.347-3.884-.888-6.532-2.031-2.648-1.144-3.395-1.517-5.625-2.125-2.23-.61-3.826-.91-6.125-.813z" enable-background="new" filter="url(#ew)" opacity=".25"/>
+ </g>
+ </g>
+ <path d="M3840.7 940.04c1.651-7.722 3.538-13.762 4.889-23.633.803-8.777 3.33-4.873 7.302-20.148 1.41-5.374 5.507.94 9.016-5.757 1.278-1.927 2.901-.97 4.508-.151 3.787 3.165 5.859 8.887 8.381 13.937 6.174 14.326 20.651 19.06 23.62 15.149 1.442-6.97 7.926-12.979 12.444-26.663.752-2.694 11.796-20.982 14.73-15.755" enable-background="new" fill="none" stroke="#000"/>
+ <path d="M3865.4 915.04c7.405-7.758 13.89-21.376 20.826-32.117 3.33-4.726 6.909 7.717 10.857 8.635 2.31-.523 3.734 2.886 5.714 3.939 5.186 3.162 2.412 9.274 10.032 15.452 6.191 4.128 8.958-16.313 14.985-17.573 4.906-1.207 8.145-.758 11.683-.606 3.95.333 4.102-8.393 6.096-12.725 2.997-6.731 7.196-4.438 10.203-11.376 1.023-3.323 1.965-7.224 2.75-12.257.887-4.8 3.057.734 4.825 3.03" enable-background="new" fill="none" stroke="#000"/>
+ <g transform="matrix(1.0057 0 0 2.3995 3249.4 125.01)" clip-path="url(#ev)" filter="url(#eu)">
+ <path d="M910.14 746.31l32.613 5.174-.361-23.876 7.188-29.682-8.45-5.264-21.823 26.511-9.167 27.137z" enable-background="accumulate" fill="#fff" fill-rule="evenodd"/>
+ <path d="M877.52 650.19h123.04v172.53H877.52z" enable-background="accumulate" fill="none"/>
+ </g>
+ <g transform="matrix(1.0057 0 0 2.3995 3249.4 125.01)" clip-path="url(#et)" filter="url(#es)">
+ <path d="M964 754.69l18.429 7.465 9.071-36.964-14.87 4.839L964 754.69z" enable-background="accumulate" fill="#fff" fill-rule="evenodd"/>
+ <path d="M924.9 677.06h142.13v125.16H924.9z" enable-background="accumulate" fill="none"/>
+ </g>
+ </g>
+ <path d="m592.8 398.62l2899.5-102.16" fill="#f8d615" fill-rule="evenodd" marker-end="url(#er)" stroke="#f8d615" stroke-width="17.844"/>
+ <path d="m576.48 779.92l2914.5 416.44" enable-background="new" fill="#f8d615" fill-rule="evenodd" marker-end="url(#eq)" stroke="#f8d615" stroke-width="18"/>
+ <g font-family="sans-serif" letter-spacing="0" word-spacing="0">
+ <text transform="translate(48.571 195.53)" x="80.219" y="107.387" fill="#f83615" font-size="40" style="line-height:125%">
+ <tspan x="80.219" y="107.387" font-size="50">CROP_DEFAULT</tspan>
+ </text>
+ <g font-size="45.314">
+ <text transform="matrix(.96106 0 0 1.0405 48.571 195.53)" x="3861.367" y="1281.72" enable-background="new" fill="#f80000" fill-opacity="0" style="line-height:125%">
+ <tspan x="3861.367" y="1281.72" font-size="56.642">COMPOSE_PADDED</tspan>
+ </text>
+ <text transform="matrix(.96106 0 0 1.0405 48.571 195.53)" x="3615.155" y="49.157" enable-background="new" fill="#f8d615" style="line-height:125%">
+ <tspan x="3615.155" y="49.157" font-size="50">COMPOSE_ACTIVE</tspan>
+ </text>
+ <text transform="matrix(.96106 0 0 1.0405 48.571 195.53)" x="2429.153" y="-3.166" enable-background="new" fill="#f83615" style="line-height:125%">
+ <tspan x="2429.153" y="-3.166" font-size="50">COMPOSE_DEFAULT</tspan>
+ </text>
+ <text transform="matrix(.96106 0 0 1.0405 48.571 195.53)" x="3681.545" y="1289.954" enable-background="new" fill="#f815bb" style="line-height:125%">
+ <tspan x="3681.545" y="1289.954" font-size="50">COMPOSE_PADDED</tspan>
+ </text>
+ </g>
+ <text transform="matrix(.96106 0 0 1.0405 48.571 195.53)" x="2438.062" y="1368.429" enable-background="new" font-size="50" style="line-height:125%">
+ <tspan x="2438.062" y="1368.429">COMPOSE_BONDS</tspan>
+ </text>
+ <g font-size="40">
+ <text transform="translate(48.571 195.53)" x="8.082" y="1438.896" enable-background="new" style="line-height:125%">
+ <tspan x="8.082" y="1438.896" font-size="50">CROP_BONDS</tspan>
+ </text>
+ <text transform="translate(48.571 195.53)" x="1455.443" y="-26.808" enable-background="new" style="line-height:125%">
+ <tspan x="1455.443" y="-26.808" font-size="50">overscan area</tspan>
+ </text>
+ <text transform="translate(48.571 195.53)" x="179.631" y="385.388" enable-background="new" fill="#f8d615" style="line-height:125%">
+ <tspan x="179.631" y="385.388" font-size="50">CROP_ACTIVE</tspan>
+ </text>
+ <text transform="translate(48.571 195.53)" x="636.674" y="-138.845" enable-background="new" style="line-height:125%">
+ <tspan x="636.674" y="-138.845" font-size="70" font-weight="bold">DATA SOURCE</tspan>
+ </text>
+ </g>
+ <text transform="matrix(.96106 0 0 1.0405 48.571 195.53)" x="3178.715" y="-129.061" enable-background="new" font-size="45.314" style="line-height:125%">
+ <tspan x="3178.715" y="-129.061" font-size="70" font-weight="bold">DATA SINK</tspan>
+ </text>
+ </g>
</svg>
diff --git a/Documentation/media/uapi/v4l/subdev-image-processing-crop.svg b/Documentation/media/uapi/v4l/subdev-image-processing-crop.svg
index 1903dd3..ee1df49 100644
--- a/Documentation/media/uapi/v4l/subdev-image-processing-crop.svg
+++ b/Documentation/media/uapi/v4l/subdev-image-processing-crop.svg
@@ -18,11 +18,11 @@
id="metadata100">
<rdf:RDF>
<cc:Work
- rdf:about="">
- <dc:format>image/svg+xml</dc:format>
- <dc:type
- rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
- <dc:title />
+ rdf:about="">
+ <dc:format>image/svg+xml</dc:format>
+ <dc:type
+ rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+ <dc:title />
</cc:Work>
</rdf:RDF>
</metadata>
diff --git a/Documentation/media/uapi/v4l/subdev-image-processing-full.svg b/Documentation/media/uapi/v4l/subdev-image-processing-full.svg
index 91cf518..c10d222 100644
--- a/Documentation/media/uapi/v4l/subdev-image-processing-full.svg
+++ b/Documentation/media/uapi/v4l/subdev-image-processing-full.svg
@@ -18,11 +18,11 @@
id="metadata260">
<rdf:RDF>
<cc:Work
- rdf:about="">
- <dc:format>image/svg+xml</dc:format>
- <dc:type
- rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
- <dc:title />
+ rdf:about="">
+ <dc:format>image/svg+xml</dc:format>
+ <dc:type
+ rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+ <dc:title />
</cc:Work>
</rdf:RDF>
</metadata>
diff --git a/Documentation/media/uapi/v4l/subdev-image-processing-scaling-multi-source.svg b/Documentation/media/uapi/v4l/subdev-image-processing-scaling-multi-source.svg
index cedcbf5..3cb68bf 100644
--- a/Documentation/media/uapi/v4l/subdev-image-processing-scaling-multi-source.svg
+++ b/Documentation/media/uapi/v4l/subdev-image-processing-scaling-multi-source.svg
@@ -18,11 +18,11 @@
id="metadata186">
<rdf:RDF>
<cc:Work
- rdf:about="">
- <dc:format>image/svg+xml</dc:format>
- <dc:type
- rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
- <dc:title />
+ rdf:about="">
+ <dc:format>image/svg+xml</dc:format>
+ <dc:type
+ rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+ <dc:title />
</cc:Work>
</rdf:RDF>
</metadata>
diff --git a/Documentation/media/uapi/v4l/vbi_525.svg b/Documentation/media/uapi/v4l/vbi_525.svg
index b05f777..643aec8 100644
--- a/Documentation/media/uapi/v4l/vbi_525.svg
+++ b/Documentation/media/uapi/v4l/vbi_525.svg
@@ -42,19 +42,21 @@
inkscape:current-layer="g10"
units="mm" /><metadata
id="metadata8"><rdf:RDF><cc:Work
- rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
- rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title /></cc:Work></rdf:RDF></metadata><defs
+ rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
+ rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title /></cc:Work></rdf:RDF></metadata><defs
id="defs6"><clipPath
id="clipPath20"
clipPathUnits="userSpaceOnUse"><path
- inkscape:connector-curvature="0"
- id="path22"
- d="m 0,0 5950,0 0,3922 L 0,3922 0,0 Z m 0,3922 5950,0 0,1 -5950,0 0,-1 z m 0,1 1359,0 0,1 -1359,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1363,0 0,1 -1363,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1367,0 0,1 -1367,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1371,0 0,1 -1371,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1375,0 0,1 -1375,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1379,0 0,1 -1379,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1383,0 0,1 -1383,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1387,0 0,1 -1387,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1391,0 0,1 -1391,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1390,0 0,1 -1390,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1386,0 0,1 -1386,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1382,0 0,1 -1382,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1378,0 0,1 -1378,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1374,0 0,1 -1374,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1370,0 0,1 -1370,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1366,0 0,1 -1366,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1362,0 0,1 -1362,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1358,0 0,1 -1358,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 5950,0 0,1 -5950,0 0,-1 z m 0,1 5950,0 0,4478 -5950,0 0,-4478 z" /></clipPath><clipPath
+ inkscape:connector-curvature="0"
+ id="path22"
+ d="m 0,0 5950,0 0,3922 L 0,3922 0,0 Z m 0,3922 5950,0 0,1 -5950,0 0,-1 z m 0,1 1359,0 0,1 -1359,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1363,0 0,1 -1363,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1367,0 0,1 -1367,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1371,0 0,1 -1371,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1375,0 0,1 -1375,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1379,0 0,1 -1379,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1383,0 0,1 -1383,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1387,0 0,1 -1387,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1391,0 0,1 -1391,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1390,0 0,1 -1390,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1386,0 0,1 -1386,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1382,0 0,1 -1382,0 0,-1 z m
+1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1378,0 0,1 -1378,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1374,0 0,1 -1374,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1370,0 0,1 -1370,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1366,0 0,1 -1366,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1362,0 0,1 -1362,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1358,0 0,1 -1358,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 5950,0 0,1 -5950,0 0,-1 z m 0,1 5950,0 0,4478 -5950,0 0,-4478 z" /></clipPath><clipPath
id="clipPath98"
clipPathUnits="userSpaceOnUse"><path
- inkscape:connector-curvature="0"
- id="path100"
- d="m 0,0 5950,0 0,4546 L 0,4546 0,0 Z m 0,4546 5950,0 0,1 -5950,0 0,-1 z m 0,1 1360,0 0,1 -1360,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1364,0 0,1 -1364,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1368,0 0,1 -1368,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1372,0 0,1 -1372,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1376,0 0,1 -1376,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1380,0 0,1 -1380,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1384,0 0,1 -1384,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1388,0 0,1 -1388,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1391,0 0,1 -1391,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1389,0 0,1 -1389,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1385,0 0,1 -1385,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1381,0 0,1 -1381,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1377,0 0,1 -1377,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1373,0 0,1 -1373,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1369,0 0,1 -1369,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1365,0 0,1 -1365,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1361,0 0,1 -1361,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1357,0 0,1 -1357,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 5950,0 0,1 -5950,0 0,-1 z m 0,1 5950,0 0,3854 -5950,0 0,-3854 z" /></clipPath></defs><g
+ inkscape:connector-curvature="0"
+ id="path100"
+ d="m 0,0 5950,0 0,4546 L 0,4546 0,0 Z m 0,4546 5950,0 0,1 -5950,0 0,-1 z m 0,1 1360,0 0,1 -1360,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1364,0 0,1 -1364,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1368,0 0,1 -1368,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1372,0 0,1 -1372,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1376,0 0,1 -1376,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1380,0 0,1 -1380,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1384,0 0,1 -1384,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1388,0 0,1 -1388,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1391,0 0,1 -1391,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1389,0 0,1 -1389,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1385,0 0,1 -1385,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1381,0 0,1 -1381,0 0,-1 z m
+1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1377,0 0,1 -1377,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1373,0 0,1 -1373,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1369,0 0,1 -1369,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1365,0 0,1 -1365,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1361,0 0,1 -1361,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 1357,0 0,1 -1357,0 0,-1 z m 1399,0 4551,0 0,1 -4551,0 0,-1 z m -1399,1 5950,0 0,1 -5950,0 0,-1 z m 0,1 5950,0 0,3854 -5950,0 0,-3854 z" /></clipPath></defs><g
transform="matrix(0.125,0,0,-0.125,-87.571875,638.05691)"
inkscape:label="vbi_525"
inkscape:groupmode="layer"
@@ -62,165 +64,165 @@
transform="matrix(1.3000026,0,0,1.3000026,-210.17435,-1094.2823)"
id="g12"
style=""><path
- inkscape:connector-curvature="0"
- id="path14"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 1281.75,3974.45 0,-85.05" /></g><g
+ inkscape:connector-curvature="0"
+ id="path14"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 1281.75,3974.45 0,-85.05" /></g><g
transform="matrix(1.3000026,0,0,1.3000026,-210.17435,-1094.2823)"
id="g16"
style=""><g
- clip-path="url(#clipPath20)"
- id="g18"
- style=""><path
- inkscape:connector-curvature="0"
- id="path24"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 1281.75,3931.93 113.4,0" /></g></g><g
+ clip-path="url(#clipPath20)"
+ id="g18"
+ style=""><path
+ inkscape:connector-curvature="0"
+ id="path24"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 1281.75,3931.93 113.4,0" /></g></g><g
transform="matrix(1.3000026,0,0,1.3000026,-210.17435,-1094.2823)"
id="g26"
style=""><path
- inkscape:connector-curvature="0"
- id="path28"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
- d="m 1352.31,3922.48 37.8,9.45 -37.8,9.45 0,-18.9" /><path
- inkscape:connector-curvature="0"
- id="path30"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 1352.31,3922.48 37.8,9.45 -37.8,9.45 0,-18.9 z" /><path
- inkscape:connector-curvature="0"
- id="path32"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 4683.75,4059.5 0,-56.7" /><path
- inkscape:connector-curvature="0"
- id="path34"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 4400.25,4059.5 0,-56.7" /><path
- inkscape:connector-curvature="0"
- id="path36"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 4116.75,4059.5 0,-56.7" /><path
- inkscape:connector-curvature="0"
- id="path38"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 3833.25,4059.5 0,-56.7" /><path
- inkscape:connector-curvature="0"
- id="path40"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 3549.75,4059.5 0,-56.7" /><path
- inkscape:connector-curvature="0"
- id="path42"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 3266.25,4059.5 0,-56.7" /><path
- inkscape:connector-curvature="0"
- id="path44"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 2982.75,4059.5 0,-56.7" /><path
- inkscape:connector-curvature="0"
- id="path46"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 2699.25,4059.5 0,-56.7" /><path
- inkscape:connector-curvature="0"
- id="path48"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 2415.75,4059.5 0,-56.7" /><path
- inkscape:connector-curvature="0"
- id="path50"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 2132.25,4059.5 0,-56.7" /><path
- inkscape:connector-curvature="0"
- id="path52"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 1848.75,4059.5 0,-56.7" /><path
- inkscape:connector-curvature="0"
- id="path54"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 1565.25,4059.5 0,-56.7" /><path
- inkscape:connector-curvature="0"
- id="path56"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 1281.75,4059.5 0,-56.7" /><path
- inkscape:connector-curvature="0"
- id="path58"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 998.25,4059.5 0,-56.7" /><path
- inkscape:connector-curvature="0"
- id="path60"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 714.75,4059.5 0,-56.7" /><path
- inkscape:connector-curvature="0"
- id="path62"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 4683.75,4144.55 0,-56.7" /><path
- inkscape:connector-curvature="0"
- id="path64"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 4400.25,4144.55 0,-56.7" /><path
- inkscape:connector-curvature="0"
- id="path66"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 4116.75,4144.55 0,-56.7" /><path
- inkscape:connector-curvature="0"
- id="path68"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 3833.25,4144.55 0,-56.7" /><path
- inkscape:connector-curvature="0"
- id="path70"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 3549.75,4144.55 0,-56.7" /><path
- inkscape:connector-curvature="0"
- id="path72"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 3266.25,4144.55 0,-56.7" /><path
- inkscape:connector-curvature="0"
- id="path74"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 2982.75,4144.55 0,-56.7" /><path
- inkscape:connector-curvature="0"
- id="path76"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 2699.25,4144.55 0,-56.7" /><path
- inkscape:connector-curvature="0"
- id="path78"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 2415.75,4144.55 0,-56.7" /><path
- inkscape:connector-curvature="0"
- id="path80"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 2132.25,4144.55 0,-56.7" /><path
- inkscape:connector-curvature="0"
- id="path82"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 1848.75,4144.55 0,-56.7" /><path
- inkscape:connector-curvature="0"
- id="path84"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 1565.25,4144.55 0,-56.7" /><path
- inkscape:connector-curvature="0"
- id="path86"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 1281.75,4144.55 0,-56.7" /><path
- inkscape:connector-curvature="0"
- id="path88"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 998.25,4144.55 0,-56.7" /><path
- inkscape:connector-curvature="0"
- id="path90"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 714.75,4144.55 0,-56.7" /><path
- inkscape:connector-curvature="0"
- id="path92"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 1281.75,4598.15 0,-85.05" /></g><g
+ inkscape:connector-curvature="0"
+ id="path28"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+ d="m 1352.31,3922.48 37.8,9.45 -37.8,9.45 0,-18.9" /><path
+ inkscape:connector-curvature="0"
+ id="path30"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 1352.31,3922.48 37.8,9.45 -37.8,9.45 0,-18.9 z" /><path
+ inkscape:connector-curvature="0"
+ id="path32"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 4683.75,4059.5 0,-56.7" /><path
+ inkscape:connector-curvature="0"
+ id="path34"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 4400.25,4059.5 0,-56.7" /><path
+ inkscape:connector-curvature="0"
+ id="path36"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 4116.75,4059.5 0,-56.7" /><path
+ inkscape:connector-curvature="0"
+ id="path38"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 3833.25,4059.5 0,-56.7" /><path
+ inkscape:connector-curvature="0"
+ id="path40"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 3549.75,4059.5 0,-56.7" /><path
+ inkscape:connector-curvature="0"
+ id="path42"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 3266.25,4059.5 0,-56.7" /><path
+ inkscape:connector-curvature="0"
+ id="path44"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 2982.75,4059.5 0,-56.7" /><path
+ inkscape:connector-curvature="0"
+ id="path46"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 2699.25,4059.5 0,-56.7" /><path
+ inkscape:connector-curvature="0"
+ id="path48"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 2415.75,4059.5 0,-56.7" /><path
+ inkscape:connector-curvature="0"
+ id="path50"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 2132.25,4059.5 0,-56.7" /><path
+ inkscape:connector-curvature="0"
+ id="path52"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 1848.75,4059.5 0,-56.7" /><path
+ inkscape:connector-curvature="0"
+ id="path54"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 1565.25,4059.5 0,-56.7" /><path
+ inkscape:connector-curvature="0"
+ id="path56"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 1281.75,4059.5 0,-56.7" /><path
+ inkscape:connector-curvature="0"
+ id="path58"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 998.25,4059.5 0,-56.7" /><path
+ inkscape:connector-curvature="0"
+ id="path60"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 714.75,4059.5 0,-56.7" /><path
+ inkscape:connector-curvature="0"
+ id="path62"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 4683.75,4144.55 0,-56.7" /><path
+ inkscape:connector-curvature="0"
+ id="path64"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 4400.25,4144.55 0,-56.7" /><path
+ inkscape:connector-curvature="0"
+ id="path66"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 4116.75,4144.55 0,-56.7" /><path
+ inkscape:connector-curvature="0"
+ id="path68"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 3833.25,4144.55 0,-56.7" /><path
+ inkscape:connector-curvature="0"
+ id="path70"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 3549.75,4144.55 0,-56.7" /><path
+ inkscape:connector-curvature="0"
+ id="path72"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 3266.25,4144.55 0,-56.7" /><path
+ inkscape:connector-curvature="0"
+ id="path74"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 2982.75,4144.55 0,-56.7" /><path
+ inkscape:connector-curvature="0"
+ id="path76"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 2699.25,4144.55 0,-56.7" /><path
+ inkscape:connector-curvature="0"
+ id="path78"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 2415.75,4144.55 0,-56.7" /><path
+ inkscape:connector-curvature="0"
+ id="path80"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 2132.25,4144.55 0,-56.7" /><path
+ inkscape:connector-curvature="0"
+ id="path82"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 1848.75,4144.55 0,-56.7" /><path
+ inkscape:connector-curvature="0"
+ id="path84"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 1565.25,4144.55 0,-56.7" /><path
+ inkscape:connector-curvature="0"
+ id="path86"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 1281.75,4144.55 0,-56.7" /><path
+ inkscape:connector-curvature="0"
+ id="path88"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 998.25,4144.55 0,-56.7" /><path
+ inkscape:connector-curvature="0"
+ id="path90"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 714.75,4144.55 0,-56.7" /><path
+ inkscape:connector-curvature="0"
+ id="path92"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 1281.75,4598.15 0,-85.05" /></g><g
transform="matrix(1.3000026,0,0,1.3000026,-210.17435,-1094.2823)"
id="g94"
style=""><g
- clip-path="url(#clipPath98)"
- id="g96"
- style=""><path
- inkscape:connector-curvature="0"
- id="path102"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 1281.75,4555.63 113.4,0" /></g></g><path
+ clip-path="url(#clipPath98)"
+ id="g96"
+ style=""><path
+ inkscape:connector-curvature="0"
+ id="path102"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 1281.75,4555.63 113.4,0" /></g></g><path
d="m 1547.8322,4815.7637 49.1401,12.2851 -49.1401,12.285 0,-24.5701"
style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
id="path106"
@@ -546,266 +548,266 @@
id="text268"
style="font-variant:normal;font-weight:normal;font-size:61.42512512px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan270"
- sodipodi:role="line"
- y="-4035.6582"
- x="1621.9453 1642.3999 1676.5522">(1)</tspan></text>
+ id="tspan270"
+ sodipodi:role="line"
+ y="-4035.6582"
+ x="1621.9453 1642.3999 1676.5522">(1)</tspan></text>
<text
y="-4127.7959"
x="4199.7334"
id="text272"
style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan274"
- sodipodi:role="line"
- y="-4127.7959"
- x="4199.7334 3831.1829 2725.5305 3112.509 3462.6321 4568.2842 4916.3442 4957.3271 5653.4458 5694.4287 5284.895 5325.8779 2356.9773 1988.4264 1210.3424 1251.3252 1292.3081 1619.8759 841.79163 882.77454 923.75732">874569101211322631262</tspan><tspan
- id="tspan276"
- sodipodi:role="line"
- y="-4238.3613"
- x="4158.748 4199.7314 4240.7144 3790.1975 3831.1807 3872.1633 2684.5457 2725.5283 2766.5112 3071.5237 3112.5063 3153.4895 3421.647 3462.6299 3503.6125 4527.2988 4568.2822 4609.2646 4895.8496 4936.833 4977.8154 5632.9517 5673.9341 5714.917 5264.4009 5305.3833 5346.3662 2315.9946 2356.9775 2397.9604 1947.444 1988.4269 2029.4097 1210.3424 1251.3252 1292.3081 1578.8931 1619.876 1660.8589 841.79163 882.77454 923.75732">271270267268269272273275274266265263264262</tspan><tspan
- id="tspan278"
- sodipodi:role="line"
- y="-5049.1729"
- x="2725.5347 4568.2881 1988.4331 2356.9839 1619.8822 3094.0852 3462.636 4916.3506 4957.334 5284.9019 5325.8843 5653.4526 5694.4351 3812.7656 4181.3164">492315610111278</tspan><tspan
- id="tspan280"
- sodipodi:role="line"
- y="-4938.6074"
- x="2725.5474 4568.3013 1988.446 2356.9966 1619.8953 3094.0981 3462.6489 4916.3638 4957.3472 5284.9146 5325.8975 5653.4653 5694.4482 3812.7788 4181.3296">492315610111278</tspan><tspan
- id="tspan282"
- sodipodi:role="line"
- y="-5049.1729"
- x="841.81781 882.8006 923.78326">524</tspan><tspan
- id="tspan284"
- sodipodi:role="line"
- y="-4938.6074"
- x="841.81781 882.8006 923.78326">261</tspan><tspan
- id="tspan286"
- sodipodi:role="line"
- y="-5049.1729"
- x="1210.3684 1251.3512 1292.3342">525</tspan><tspan
- id="tspan288"
- sodipodi:role="line"
- y="-4938.6074"
- x="1210.3684 1251.3512 1292.3342">262</tspan><tspan
- id="tspan290"
- sodipodi:role="line"
- y="-5049.1729"
- x="6022.0161 6062.999">22</tspan><tspan
- id="tspan292"
- sodipodi:role="line"
- y="-4938.6074"
- x="6022.0161 6062.999">22</tspan><tspan
- id="tspan294"
- sodipodi:role="line"
- y="-5049.1729"
- x="6390.5669 6431.5498">23</tspan><tspan
- id="tspan296"
- sodipodi:role="line"
- y="-4938.6074"
- x="6390.5669 6431.5498">23</tspan><tspan
- id="tspan298"
- sodipodi:role="line"
- y="-4238.3623"
- x="6001.5244 6042.5068 6083.4902">285</tspan><tspan
- id="tspan300"
- sodipodi:role="line"
- y="-4127.7964"
- x="6022.0156 6062.9985">22</tspan><tspan
- id="tspan302"
- sodipodi:role="line"
- y="-4238.3623"
- x="6370.0747 6411.0571 6452.04">286</tspan><tspan
- id="tspan304"
- sodipodi:role="line"
- y="-4127.7964"
- x="6390.5664 6431.5493">23</tspan><tspan
- id="tspan306"
- sodipodi:role="line"
- y="-4459.4922"
- x="3540.4146 3581.3972 3618.2522 3638.7437 3659.2354 3679.7266 3696.0901 3737.073 3753.4365">1st field</tspan><tspan
- id="tspan308"
- sodipodi:role="line"
- y="-3648.6809"
- x="3528.1047 3569.0876 3610.0703 3651.0532 3671.5447 3692.0361 3708.3999 3749.3826 3765.7463">2nd field</tspan></text>
+ id="tspan274"
+ sodipodi:role="line"
+ y="-4127.7959"
+ x="4199.7334 3831.1829 2725.5305 3112.509 3462.6321 4568.2842 4916.3442 4957.3271 5653.4458 5694.4287 5284.895 5325.8779 2356.9773 1988.4264 1210.3424 1251.3252 1292.3081 1619.8759 841.79163 882.77454 923.75732">874569101211322631262</tspan><tspan
+ id="tspan276"
+ sodipodi:role="line"
+ y="-4238.3613"
+ x="4158.748 4199.7314 4240.7144 3790.1975 3831.1807 3872.1633 2684.5457 2725.5283 2766.5112 3071.5237 3112.5063 3153.4895 3421.647 3462.6299 3503.6125 4527.2988 4568.2822 4609.2646 4895.8496 4936.833 4977.8154 5632.9517 5673.9341 5714.917 5264.4009 5305.3833 5346.3662 2315.9946 2356.9775 2397.9604 1947.444 1988.4269 2029.4097 1210.3424 1251.3252 1292.3081 1578.8931 1619.876 1660.8589 841.79163 882.77454 923.75732">271270267268269272273275274266265263264262</tspan><tspan
+ id="tspan278"
+ sodipodi:role="line"
+ y="-5049.1729"
+ x="2725.5347 4568.2881 1988.4331 2356.9839 1619.8822 3094.0852 3462.636 4916.3506 4957.334 5284.9019 5325.8843 5653.4526 5694.4351 3812.7656 4181.3164">492315610111278</tspan><tspan
+ id="tspan280"
+ sodipodi:role="line"
+ y="-4938.6074"
+ x="2725.5474 4568.3013 1988.446 2356.9966 1619.8953 3094.0981 3462.6489 4916.3638 4957.3472 5284.9146 5325.8975 5653.4653 5694.4482 3812.7788 4181.3296">492315610111278</tspan><tspan
+ id="tspan282"
+ sodipodi:role="line"
+ y="-5049.1729"
+ x="841.81781 882.8006 923.78326">524</tspan><tspan
+ id="tspan284"
+ sodipodi:role="line"
+ y="-4938.6074"
+ x="841.81781 882.8006 923.78326">261</tspan><tspan
+ id="tspan286"
+ sodipodi:role="line"
+ y="-5049.1729"
+ x="1210.3684 1251.3512 1292.3342">525</tspan><tspan
+ id="tspan288"
+ sodipodi:role="line"
+ y="-4938.6074"
+ x="1210.3684 1251.3512 1292.3342">262</tspan><tspan
+ id="tspan290"
+ sodipodi:role="line"
+ y="-5049.1729"
+ x="6022.0161 6062.999">22</tspan><tspan
+ id="tspan292"
+ sodipodi:role="line"
+ y="-4938.6074"
+ x="6022.0161 6062.999">22</tspan><tspan
+ id="tspan294"
+ sodipodi:role="line"
+ y="-5049.1729"
+ x="6390.5669 6431.5498">23</tspan><tspan
+ id="tspan296"
+ sodipodi:role="line"
+ y="-4938.6074"
+ x="6390.5669 6431.5498">23</tspan><tspan
+ id="tspan298"
+ sodipodi:role="line"
+ y="-4238.3623"
+ x="6001.5244 6042.5068 6083.4902">285</tspan><tspan
+ id="tspan300"
+ sodipodi:role="line"
+ y="-4127.7964"
+ x="6022.0156 6062.9985">22</tspan><tspan
+ id="tspan302"
+ sodipodi:role="line"
+ y="-4238.3623"
+ x="6370.0747 6411.0571 6452.04">286</tspan><tspan
+ id="tspan304"
+ sodipodi:role="line"
+ y="-4127.7964"
+ x="6390.5664 6431.5493">23</tspan><tspan
+ id="tspan306"
+ sodipodi:role="line"
+ y="-4459.4922"
+ x="3540.4146 3581.3972 3618.2522 3638.7437 3659.2354 3679.7266 3696.0901 3737.073 3753.4365">1st field</tspan><tspan
+ id="tspan308"
+ sodipodi:role="line"
+ y="-3648.6809"
+ x="3528.1047 3569.0876 3610.0703 3651.0532 3671.5447 3692.0361 3708.3999 3749.3826 3765.7463">2nd field</tspan></text>
<text
y="-4127.7959"
x="4199.7334 3831.1829 2725.5305 3112.509 3462.6321 4568.2842 4916.3442 4957.3271 5653.4458 5694.4287 5284.895 5325.8779 2356.9773 1988.4264 1210.3424 1251.3252 1292.3081 1619.8759 841.79163 882.77454 923.75732"
id="text3632"
style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan3634"
- sodipodi:role="line"
- y="-4127.7959"
- x="4199.7334 3831.1829 2725.5305 3112.509 3462.6321 4568.2842 4916.3442 4957.3271 5653.4458 5694.4287 5284.895 5325.8779 2356.9773 1988.4264 1210.3424 1251.3252 1292.3081 1619.8759 841.79163 882.77454 923.75732">874569101211322631262</tspan></text>
+ id="tspan3634"
+ sodipodi:role="line"
+ y="-4127.7959"
+ x="4199.7334 3831.1829 2725.5305 3112.509 3462.6321 4568.2842 4916.3442 4957.3271 5653.4458 5694.4287 5284.895 5325.8779 2356.9773 1988.4264 1210.3424 1251.3252 1292.3081 1619.8759 841.79163 882.77454 923.75732">874569101211322631262</tspan></text>
<text
y="-4238.3613"
x="4158.748 4199.7314 4240.7144 3790.1975 3831.1807 3872.1633 2684.5457 2725.5283 2766.5112 3071.5237 3112.5063 3153.4895 3421.647 3462.6299 3503.6125 4527.2988 4568.2822 4609.2646 4895.8496 4936.833 4977.8154 5632.9517 5673.9341 5714.917 5264.4009 5305.3833 5346.3662 2315.9946 2356.9775 2397.9604 1947.444 1988.4269 2029.4097 1210.3424 1251.3252 1292.3081 1578.8931 1619.876 1660.8589 841.79163 882.77454 923.75732"
id="text3636"
style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan3638"
- sodipodi:role="line"
- y="-4238.3613"
- x="4158.748 4199.7314 4240.7144 3790.1975 3831.1807 3872.1633 2684.5457 2725.5283 2766.5112 3071.5237 3112.5063 3153.4895 3421.647 3462.6299 3503.6125 4527.2988 4568.2822 4609.2646 4895.8496 4936.833 4977.8154 5632.9517 5673.9341 5714.917 5264.4009 5305.3833 5346.3662 2315.9946 2356.9775 2397.9604 1947.444 1988.4269 2029.4097 1210.3424 1251.3252 1292.3081 1578.8931 1619.876 1660.8589 841.79163 882.77454 923.75732">271270267268269272273275274266265263264262</tspan></text>
+ id="tspan3638"
+ sodipodi:role="line"
+ y="-4238.3613"
+ x="4158.748 4199.7314 4240.7144 3790.1975 3831.1807 3872.1633 2684.5457 2725.5283 2766.5112 3071.5237 3112.5063 3153.4895 3421.647 3462.6299 3503.6125 4527.2988 4568.2822 4609.2646 4895.8496 4936.833 4977.8154 5632.9517 5673.9341 5714.917 5264.4009 5305.3833 5346.3662 2315.9946 2356.9775 2397.9604 1947.444 1988.4269 2029.4097 1210.3424 1251.3252 1292.3081 1578.8931 1619.876 1660.8589 841.79163 882.77454 923.75732">271270267268269272273275274266265263264262</tspan></text>
<text
y="-5049.1729"
x="2725.5347 4568.2881 1988.4331 2356.9839 1619.8822 3094.0852 3462.636 4916.3506 4957.334 5284.9019 5325.8843 5653.4526 5694.4351 3812.7656 4181.3164"
id="text3640"
style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan3642"
- sodipodi:role="line"
- y="-5049.1729"
- x="2725.5347 4568.2881 1988.4331 2356.9839 1619.8822 3094.0852 3462.636 4916.3506 4957.334 5284.9019 5325.8843 5653.4526 5694.4351 3812.7656 4181.3164">492315610111278</tspan></text>
+ id="tspan3642"
+ sodipodi:role="line"
+ y="-5049.1729"
+ x="2725.5347 4568.2881 1988.4331 2356.9839 1619.8822 3094.0852 3462.636 4916.3506 4957.334 5284.9019 5325.8843 5653.4526 5694.4351 3812.7656 4181.3164">492315610111278</tspan></text>
<text
y="-4938.6074"
x="2725.5474 4568.3013 1988.446 2356.9966 1619.8953 3094.0981 3462.6489 4916.3638 4957.3472 5284.9146 5325.8975 5653.4653 5694.4482 3812.7788 4181.3296"
id="text3644"
style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan3646"
- sodipodi:role="line"
- y="-4938.6074"
- x="2725.5474 4568.3013 1988.446 2356.9966 1619.8953 3094.0981 3462.6489 4916.3638 4957.3472 5284.9146 5325.8975 5653.4653 5694.4482 3812.7788 4181.3296">492315610111278</tspan></text>
+ id="tspan3646"
+ sodipodi:role="line"
+ y="-4938.6074"
+ x="2725.5474 4568.3013 1988.446 2356.9966 1619.8953 3094.0981 3462.6489 4916.3638 4957.3472 5284.9146 5325.8975 5653.4653 5694.4482 3812.7788 4181.3296">492315610111278</tspan></text>
<text
y="-5049.1729"
x="841.81781 882.8006 923.78326"
id="text3648"
style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan3650"
- sodipodi:role="line"
- y="-5049.1729"
- x="841.81781 882.8006 923.78326">524</tspan></text>
+ id="tspan3650"
+ sodipodi:role="line"
+ y="-5049.1729"
+ x="841.81781 882.8006 923.78326">524</tspan></text>
<text
y="-4938.6074"
x="841.81781 882.8006 923.78326"
id="text3652"
style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan3654"
- sodipodi:role="line"
- y="-4938.6074"
- x="841.81781 882.8006 923.78326">261</tspan></text>
+ id="tspan3654"
+ sodipodi:role="line"
+ y="-4938.6074"
+ x="841.81781 882.8006 923.78326">261</tspan></text>
<text
y="-5049.1729"
x="1210.3684 1251.3512 1292.3342"
id="text3656"
style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan3658"
- sodipodi:role="line"
- y="-5049.1729"
- x="1210.3684 1251.3512 1292.3342">525</tspan></text>
+ id="tspan3658"
+ sodipodi:role="line"
+ y="-5049.1729"
+ x="1210.3684 1251.3512 1292.3342">525</tspan></text>
<text
y="-4938.6074"
x="1210.3684 1251.3512 1292.3342"
id="text3660"
style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan3662"
- sodipodi:role="line"
- y="-4938.6074"
- x="1210.3684 1251.3512 1292.3342">262</tspan></text>
+ id="tspan3662"
+ sodipodi:role="line"
+ y="-4938.6074"
+ x="1210.3684 1251.3512 1292.3342">262</tspan></text>
<text
y="-5049.1729"
x="6022.0161 6062.999"
id="text3664"
style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan3666"
- sodipodi:role="line"
- y="-5049.1729"
- x="6022.0161 6062.999">22</tspan></text>
+ id="tspan3666"
+ sodipodi:role="line"
+ y="-5049.1729"
+ x="6022.0161 6062.999">22</tspan></text>
<text
y="-4938.6074"
x="6022.0161 6062.999"
id="text3668"
style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan3670"
- sodipodi:role="line"
- y="-4938.6074"
- x="6022.0161 6062.999">22</tspan></text>
+ id="tspan3670"
+ sodipodi:role="line"
+ y="-4938.6074"
+ x="6022.0161 6062.999">22</tspan></text>
<text
y="-5049.1729"
x="6390.5669 6431.5498"
id="text3672"
style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan3674"
- sodipodi:role="line"
- y="-5049.1729"
- x="6390.5669 6431.5498">23</tspan></text>
+ id="tspan3674"
+ sodipodi:role="line"
+ y="-5049.1729"
+ x="6390.5669 6431.5498">23</tspan></text>
<text
y="-4938.6074"
x="6390.5669 6431.5498"
id="text3676"
style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan3678"
- sodipodi:role="line"
- y="-4938.6074"
- x="6390.5669 6431.5498">23</tspan></text>
+ id="tspan3678"
+ sodipodi:role="line"
+ y="-4938.6074"
+ x="6390.5669 6431.5498">23</tspan></text>
<text
y="-4238.3623"
x="6001.5244 6042.5068 6083.4902"
id="text3680"
style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan3682"
- sodipodi:role="line"
- y="-4238.3623"
- x="6001.5244 6042.5068 6083.4902">285</tspan></text>
+ id="tspan3682"
+ sodipodi:role="line"
+ y="-4238.3623"
+ x="6001.5244 6042.5068 6083.4902">285</tspan></text>
<text
y="-4127.7964"
x="6022.0156 6062.9985"
id="text3684"
style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan3686"
- sodipodi:role="line"
- y="-4127.7964"
- x="6022.0156 6062.9985">22</tspan></text>
+ id="tspan3686"
+ sodipodi:role="line"
+ y="-4127.7964"
+ x="6022.0156 6062.9985">22</tspan></text>
<text
y="-4238.3623"
x="6370.0747 6411.0571 6452.04"
id="text3688"
style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan3690"
- sodipodi:role="line"
- y="-4238.3623"
- x="6370.0747 6411.0571 6452.04">286</tspan></text>
+ id="tspan3690"
+ sodipodi:role="line"
+ y="-4238.3623"
+ x="6370.0747 6411.0571 6452.04">286</tspan></text>
<text
y="-4127.7964"
x="6390.5664 6431.5493"
id="text3692"
style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan3694"
- sodipodi:role="line"
- y="-4127.7964"
- x="6390.5664 6431.5493">23</tspan></text>
+ id="tspan3694"
+ sodipodi:role="line"
+ y="-4127.7964"
+ x="6390.5664 6431.5493">23</tspan></text>
<text
y="-4459.4922"
x="3540.4146 3581.3972 3618.2522 3638.7437 3659.2354 3679.7266 3696.0901 3737.073 3753.4365"
id="text3696"
style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan3698"
- sodipodi:role="line"
- y="-4459.4922"
- x="3540.4146 3581.3972 3618.2522 3638.7437 3659.2354 3679.7266 3696.0901 3737.073 3753.4365">1st field</tspan></text>
+ id="tspan3698"
+ sodipodi:role="line"
+ y="-4459.4922"
+ x="3540.4146 3581.3972 3618.2522 3638.7437 3659.2354 3679.7266 3696.0901 3737.073 3753.4365">1st field</tspan></text>
<text
y="-3648.6809"
x="3528.1047 3569.0876 3610.0703 3651.0532 3671.5447 3692.0361 3708.3999 3749.3826 3765.7463"
id="text3700"
style="font-variant:normal;font-weight:normal;font-size:73.71015167px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"><tspan
- id="tspan3702"
- sodipodi:role="line"
- y="-3648.6809"
- x="3528.1047 3569.0876 3610.0703 3651.0532 3671.5447 3692.0361 3708.3999 3749.3826 3765.7463">2nd field</tspan></text>
+ id="tspan3702"
+ sodipodi:role="line"
+ y="-3648.6809"
+ x="3528.1047 3569.0876 3610.0703 3651.0532 3671.5447 3692.0361 3708.3999 3749.3826 3765.7463">2nd field</tspan></text>
</g></svg>
\ No newline at end of file
diff --git a/Documentation/media/uapi/v4l/vbi_625.svg b/Documentation/media/uapi/v4l/vbi_625.svg
index c117ddb..9b18243 100644
--- a/Documentation/media/uapi/v4l/vbi_625.svg
+++ b/Documentation/media/uapi/v4l/vbi_625.svg
@@ -42,19 +42,21 @@
inkscape:current-layer="g10"
units="mm" /><metadata
id="metadata8"><rdf:RDF><cc:Work
- rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
- rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title /></cc:Work></rdf:RDF></metadata><defs
+ rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
+ rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title /></cc:Work></rdf:RDF></metadata><defs
id="defs6"><clipPath
clipPathUnits="userSpaceOnUse"
id="clipPath20"><path
- d="m 0,0 5950,0 0,4546 L 0,4546 0,0 Z m 0,4546 5950,0 0,1 -5950,0 0,-1 z m 0,1 2211,0 0,1 -2211,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2215,0 0,1 -2215,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2219,0 0,1 -2219,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2223,0 0,1 -2223,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2227,0 0,1 -2227,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2231,0 0,1 -2231,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2235,0 0,1 -2235,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2239,0 0,1 -2239,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2241,0 0,1 -2241,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2240,0 0,1 -2240,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2236,0 0,1 -2236,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2232,0 0,1 -2232,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2228,0 0,1 -2228,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2224,0 0,1 -2224,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2220,0 0,1 -2220,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2216,0 0,1 -2216,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2212,0 0,1 -2212,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2208,0 0,1 -2208,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 5950,0 0,1 -5950,0 0,-1 z m 0,1 5950,0 0,3854 -5950,0 0,-3854 z"
- id="path22"
- inkscape:connector-curvature="0" /></clipPath><clipPath
+ d="m 0,0 5950,0 0,4546 L 0,4546 0,0 Z m 0,4546 5950,0 0,1 -5950,0 0,-1 z m 0,1 2211,0 0,1 -2211,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2215,0 0,1 -2215,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2219,0 0,1 -2219,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2223,0 0,1 -2223,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2227,0 0,1 -2227,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2231,0 0,1 -2231,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2235,0 0,1 -2235,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2239,0 0,1 -2239,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2241,0 0,1 -2241,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2240,0 0,1 -2240,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2236,0 0,1 -2236,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2232,0 0,1 -2232,0 0,-1 z m
+2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2228,0 0,1 -2228,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2224,0 0,1 -2224,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2220,0 0,1 -2220,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2216,0 0,1 -2216,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2212,0 0,1 -2212,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2208,0 0,1 -2208,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 5950,0 0,1 -5950,0 0,-1 z m 0,1 5950,0 0,3854 -5950,0 0,-3854 z"
+ id="path22"
+ inkscape:connector-curvature="0" /></clipPath><clipPath
clipPathUnits="userSpaceOnUse"
id="clipPath98"><path
- d="m 0,0 5950,0 0,3922 L 0,3922 0,0 Z m 0,3922 5950,0 0,1 -5950,0 0,-1 z m 0,1 2209,0 0,1 -2209,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2213,0 0,1 -2213,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2217,0 0,1 -2217,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2221,0 0,1 -2221,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2225,0 0,1 -2225,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2229,0 0,1 -2229,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2233,0 0,1 -2233,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2237,0 0,1 -2237,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2241,0 0,1 -2241,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2241,0 0,1 -2241,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2237,0 0,1 -2237,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2233,0 0,1 -2233,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2229,0 0,1 -2229,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2225,0 0,1 -2225,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2221,0 0,1 -2221,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2217,0 0,1 -2217,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2213,0 0,1 -2213,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2209,0 0,1 -2209,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 5950,0 0,1 -5950,0 0,-1 z m 0,1 5950,0 0,4478 -5950,0 0,-4478 z"
- id="path100"
- inkscape:connector-curvature="0" /></clipPath></defs><g
+ d="m 0,0 5950,0 0,3922 L 0,3922 0,0 Z m 0,3922 5950,0 0,1 -5950,0 0,-1 z m 0,1 2209,0 0,1 -2209,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2213,0 0,1 -2213,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2217,0 0,1 -2217,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2221,0 0,1 -2221,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2225,0 0,1 -2225,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2229,0 0,1 -2229,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2233,0 0,1 -2233,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2237,0 0,1 -2237,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2241,0 0,1 -2241,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2241,0 0,1 -2241,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2237,0 0,1 -2237,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2233,0 0,1 -2233,0 0,-1 z m
+2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2229,0 0,1 -2229,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2225,0 0,1 -2225,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2221,0 0,1 -2221,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2217,0 0,1 -2217,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2213,0 0,1 -2213,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 2209,0 0,1 -2209,0 0,-1 z m 2250,0 3700,0 0,1 -3700,0 0,-1 z m -2250,1 5950,0 0,1 -5950,0 0,-1 z m 0,1 5950,0 0,4478 -5950,0 0,-4478 z"
+ id="path100"
+ inkscape:connector-curvature="0" /></clipPath></defs><g
id="g10"
inkscape:groupmode="layer"
inkscape:label="vbi_625"
@@ -62,20 +64,20 @@
id="g12"
transform="matrix(1.3045828,0,0,1.3045828,-213.38312,-1110.9872)"
style=""><path
- d="m 2132.25,4598.15 0,-85.05"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- id="path14"
- inkscape:connector-curvature="0" /></g><g
+ d="m 2132.25,4598.15 0,-85.05"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ id="path14"
+ inkscape:connector-curvature="0" /></g><g
id="g16"
transform="matrix(1.3045828,0,0,1.3045828,-213.38312,-1110.9872)"
style=""><g
- id="g18"
- clip-path="url(#clipPath20)"
- style=""><path
- d="m 2132.25,4555.63 113.4,0"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- id="path24"
- inkscape:connector-curvature="0" /></g></g><path
+ id="g18"
+ clip-path="url(#clipPath20)"
+ style=""><path
+ d="m 2132.25,4555.63 113.4,0"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ id="path24"
+ inkscape:connector-curvature="0" /></g></g><path
inkscape:connector-curvature="0"
id="path28"
style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
@@ -211,13 +213,13 @@
id="g94"
transform="matrix(1.3045828,0,0,1.3045828,-213.38312,-1110.9872)"
style=""><g
- id="g96"
- clip-path="url(#clipPath98)"
- style=""><path
- d="m 2132.25,3931.93 113.4,0"
- style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- id="path102"
- inkscape:connector-curvature="0" /></g></g><path
+ id="g96"
+ clip-path="url(#clipPath98)"
+ style=""><path
+ d="m 2132.25,3931.93 113.4,0"
+ style="fill:none;stroke:#000000;stroke-width:2.36249995;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ id="path102"
+ inkscape:connector-curvature="0" /></g></g><path
inkscape:connector-curvature="0"
id="path106"
style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
@@ -385,7 +387,8 @@
inkscape:connector-curvature="0"
id="path188"
style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 1162.8865,4739.7407 18.486,0 0,92.4688 18.499,-18.499 18.4859,36.9849 18.499,-36.9849 18.4859,36.9849 18.499,-55.4708 18.4859,55.4708 18.499,-18.4859 18.486,55.4708 18.499,-55.4708 18.4859,18.4859 18.499,36.9849 18.4859,-73.9698 18.499,36.9849 18.4859,-55.4708 0,-55.4839 18.499,0 0,-110.9548 36.985,0 0,110.9548 18.4859,0 0,55.4839 18.499,36.9849 18.4859,-36.9849 18.499,55.4708 18.4859,-18.4859 18.499,55.4708 18.486,-18.4859 0,-129.4537 18.4989,0 0,-110.9548 18.486,0 0,110.9548 166.4387,0 0,-110.9548 18.4859,0 0,110.9548 166.4387,0 0,-110.9548 18.4859,0 0,110.9548 166.4387,0 0,-110.9548 18.4859,0 0,110.9548 166.4387,0 0,-110.9548 18.4859,0 0,110.9548 166.4387,0 0,-110.9548 147.9397,0 0,110.9548 36.9849,0 0,-110.9548 147.9397,0 0,110.9548 36.985,0 0,-110.9548 147.9397,0 0,110.9548 36.9849,0 0,-110.9548 147.9397,0 0,110.9548 36.9849,0 0,-110.9548 147.9397,0 0,110.9548 36.9849,0 0,-110.9548 18.4859,0 0,110.9548 166.4387,0 0,-110.9548 18.486,0 0,110.9548 166.4386,0 0,-110.9548 18.486,0 0,110.9548 166.4387,0 0,-110.9548 18.4859,0 0,110.9548 166.4387,0 0,-110.9548 18.4859,0 0,110.9548 166.4387,0 0,-110.9548 36.9849,0 0,110.9548 332.8643,0 0,-110.9548 36.9849,0 0,110.9548 18.486,0" /><path
+ d="m 1162.8865,4739.7407 18.486,0 0,92.4688 18.499,-18.499 18.4859,36.9849 18.499,-36.9849 18.4859,36.9849 18.499,-55.4708 18.4859,55.4708 18.499,-18.4859 18.486,55.4708 18.499,-55.4708 18.4859,18.4859 18.499,36.9849 18.4859,-73.9698 18.499,36.9849 18.4859,-55.4708 0,-55.4839 18.499,0 0,-110.9548 36.985,0 0,110.9548 18.4859,0 0,55.4839 18.499,36.9849 18.4859,-36.9849 18.499,55.4708 18.4859,-18.4859 18.499,55.4708 18.486,-18.4859 0,-129.4537 18.4989,0 0,-110.9548 18.486,0 0,110.9548 166.4387,0 0,-110.9548 18.4859,0 0,110.9548 166.4387,0 0,-110.9548 18.4859,0 0,110.9548 166.4387,0 0,-110.9548 18.4859,0 0,110.9548 166.4387,0 0,-110.9548 18.4859,0 0,110.9548 166.4387,0 0,-110.9548 147.9397,0 0,110.9548 36.9849,0 0,-110.9548 147.9397,0 0,110.9548 36.985,0 0,-110.9548 147.9397,0 0,110.9548 36.9849,0 0,-110.9548 147.9397,0 0,110.9548 36.9849,0 0,-110.9548 147.9397,0 0,110.9548 36.9849,0
+0,-110.9548 18.4859,0 0,110.9548 166.4387,0 0,-110.9548 18.486,0 0,110.9548 166.4386,0 0,-110.9548 18.486,0 0,110.9548 166.4387,0 0,-110.9548 18.4859,0 0,110.9548 166.4387,0 0,-110.9548 18.4859,0 0,110.9548 166.4387,0 0,-110.9548 36.9849,0 0,110.9548 332.8643,0 0,-110.9548 36.9849,0 0,110.9548 18.486,0" /><path
inkscape:connector-curvature="0"
id="path190"
style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
@@ -409,7 +412,8 @@
inkscape:connector-curvature="0"
id="path200"
style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 1162.8865,3926.0723 18.486,0 0,55.4839 18.499,92.4558 18.4859,-55.4708 36.9849,36.9849 18.499,-55.4839 18.4859,18.499 18.499,-36.985 18.486,55.4709 18.499,-18.4859 18.4859,-36.985 18.499,18.486 18.4859,36.9849 18.499,-36.9849 18.4859,36.9849 0,-110.9548 18.499,0 0,-110.9547 18.486,0 0,110.9547 166.4386,0 0,-110.9547 18.486,0 0,110.9547 166.4387,0 0,-110.9547 18.4859,0 0,110.9547 166.4387,0 0,-110.9547 18.4859,0 0,110.9547 166.4387,0 0,-110.9547 18.4859,0 0,110.9547 166.4387,0 0,-110.9547 147.9397,0 0,110.9547 36.9849,0 0,-110.9547 147.9397,0 0,110.9547 36.9849,0 0,-110.9547 147.9397,0 0,110.9547 36.985,0 0,-110.9547 147.9397,0 0,110.9547 36.9849,0 0,-110.9547 147.9397,0 0,110.9547 36.9849,0 0,-110.9547 18.4859,0 0,110.9547 166.4387,0 0,-110.9547 18.4859,0 0,110.9547 166.4387,0 0,-110.9547 18.486,0 0,110.9547 166.4386,0 0,-110.9547 18.486,0 0,110.9547 166.4387,0 0,-110.9547 18.4859,0 0,110.9547 351.3633,0 0,-110.9547 36.9849,0 0,110.9547 18.486,0" /><path
+ d="m 1162.8865,3926.0723 18.486,0 0,55.4839 18.499,92.4558 18.4859,-55.4708 36.9849,36.9849 18.499,-55.4839 18.4859,18.499 18.499,-36.985 18.486,55.4709 18.499,-18.4859 18.4859,-36.985 18.499,18.486 18.4859,36.9849 18.499,-36.9849 18.4859,36.9849 0,-110.9548 18.499,0 0,-110.9547 18.486,0 0,110.9547 166.4386,0 0,-110.9547 18.486,0 0,110.9547 166.4387,0 0,-110.9547 18.4859,0 0,110.9547 166.4387,0 0,-110.9547 18.4859,0 0,110.9547 166.4387,0 0,-110.9547 18.4859,0 0,110.9547 166.4387,0 0,-110.9547 147.9397,0 0,110.9547 36.9849,0 0,-110.9547 147.9397,0 0,110.9547 36.9849,0 0,-110.9547 147.9397,0 0,110.9547 36.985,0 0,-110.9547 147.9397,0 0,110.9547 36.9849,0 0,-110.9547 147.9397,0 0,110.9547 36.9849,0 0,-110.9547 18.4859,0 0,110.9547 166.4387,0 0,-110.9547 18.4859,0 0,110.9547 166.4387,0 0,-110.9547 18.486,0 0,110.9547 166.4386,0 0,-110.9547 18.486,0 0,110.9547 166.4387,0 0,-110.9547
+18.4859,0 0,110.9547 351.3633,0 0,-110.9547 36.9849,0 0,110.9547 18.486,0" /><path
inkscape:connector-curvature="0"
id="path202"
style="fill:none;stroke:#000000;stroke-width:3.08207679;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
@@ -559,300 +563,300 @@
id="text276"
x="3550.4165"
y="-4462.3472"><tspan
- x="3550.4165 3591.5437 3628.5286 3649.0923 3669.656 3690.2195 3706.6409 3747.7681 3764.1895"
- y="-4462.3472"
- sodipodi:role="line"
- id="tspan278">1st field</tspan><tspan
- x="2732.6792 3823.7344 4193.5835 4581.9253 4951.7744 5321.6235 3472.3777 3102.5283 2321.7029 2362.8303 2403.9575 1951.8538 1992.981 2034.1083 1582.0045 1623.132 1664.259 5670.9062 5712.0337"
- y="-4943.1509"
- sodipodi:role="line"
- id="tspan280">1456783231231131022</tspan><tspan
- x="2732.6726 3823.7278 4193.5771 4581.9189 4951.7681 5321.6172 3472.3711 3102.522 2321.6965 2362.8237 2403.9509 1951.8473 1992.9745 2034.1018 1581.998 1623.1254 1664.2524 5670.8999 5712.0269"
- y="-5054.1064"
- sodipodi:role="line"
- id="tspan282">1456783262562462322</tspan><tspan
- x="842.29962 883.42694 924.55408"
- y="-4943.1509"
- sodipodi:role="line"
- id="tspan284">308</tspan><tspan
- x="842.29962 883.42694 924.55408"
- y="-5054.1064"
- sodipodi:role="line"
- id="tspan286">621</tspan><tspan
- x="1212.1489 1253.276 1294.4033"
- y="-4943.1509"
- sodipodi:role="line"
- id="tspan288">309</tspan><tspan
- x="1212.1489 1253.276 1294.4033"
- y="-5054.1064"
- sodipodi:role="line"
- id="tspan290">622</tspan><tspan
- x="3538.0635 3579.1907 3620.3179 3661.4451 3682.0088 3702.5723 3718.9937 3760.1208 3776.5422"
- y="-3648.6792"
- sodipodi:role="line"
- id="tspan292">2nd field</tspan></text>
+ x="3550.4165 3591.5437 3628.5286 3649.0923 3669.656 3690.2195 3706.6409 3747.7681 3764.1895"
+ y="-4462.3472"
+ sodipodi:role="line"
+ id="tspan278">1st field</tspan><tspan
+ x="2732.6792 3823.7344 4193.5835 4581.9253 4951.7744 5321.6235 3472.3777 3102.5283 2321.7029 2362.8303 2403.9575 1951.8538 1992.981 2034.1083 1582.0045 1623.132 1664.259 5670.9062 5712.0337"
+ y="-4943.1509"
+ sodipodi:role="line"
+ id="tspan280">1456783231231131022</tspan><tspan
+ x="2732.6726 3823.7278 4193.5771 4581.9189 4951.7681 5321.6172 3472.3711 3102.522 2321.6965 2362.8237 2403.9509 1951.8473 1992.9745 2034.1018 1581.998 1623.1254 1664.2524 5670.8999 5712.0269"
+ y="-5054.1064"
+ sodipodi:role="line"
+ id="tspan282">1456783262562462322</tspan><tspan
+ x="842.29962 883.42694 924.55408"
+ y="-4943.1509"
+ sodipodi:role="line"
+ id="tspan284">308</tspan><tspan
+ x="842.29962 883.42694 924.55408"
+ y="-5054.1064"
+ sodipodi:role="line"
+ id="tspan286">621</tspan><tspan
+ x="1212.1489 1253.276 1294.4033"
+ y="-4943.1509"
+ sodipodi:role="line"
+ id="tspan288">309</tspan><tspan
+ x="1212.1489 1253.276 1294.4033"
+ y="-5054.1064"
+ sodipodi:role="line"
+ id="tspan290">622</tspan><tspan
+ x="3538.0635 3579.1907 3620.3179 3661.4451 3682.0088 3702.5723 3718.9937 3760.1208 3776.5422"
+ y="-3648.6792"
+ sodipodi:role="line"
+ id="tspan292">2nd field</tspan></text>
<text
transform="scale(1,-1)"
style="font-variant:normal;font-weight:normal;font-size:61.64153671px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
id="text294"
x="2734.751"
y="-4037.021"><tspan
- x="2734.751 2755.2776 2789.5503"
- y="-4037.021"
- sodipodi:role="line"
- id="tspan296">(1)</tspan></text>
+ x="2734.751 2755.2776 2789.5503"
+ y="-4037.021"
+ sodipodi:role="line"
+ id="tspan296">(1)</tspan></text>
<text
transform="scale(1,-1)"
style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
id="text298"
x="4951.772"
y="-4129.4834"><tspan
- x="4951.772 4581.9229 4212.0737 3842.2244 3490.8677 3102.5259 2321.7004 2362.8276 2403.9551 1951.8512 1992.9785 2034.1057 1582.0022 1623.1293 1664.2563"
- y="-4129.4834"
- sodipodi:role="line"
- id="tspan300">765432313312311</tspan><tspan
- x="6020.1929 6061.3198 6102.4473 5650.3433 5691.4707 5732.5981 5280.4941 5321.6216 5362.7485 4910.645 4951.7725 4992.8994 4540.7959 4581.9229 4623.0503 4170.9468 4212.0737 4253.2012 3801.0974 3842.2246 3883.3518 3449.7405 3490.8677 3531.9951 3061.3989 3102.5261 3143.6533 2691.5496 2732.677 2773.8042 2321.7004 2362.8276 2403.9551 1951.8512 1992.9785 2034.1057 1582.0022 1623.1293 1664.2563"
- y="-4240.4385"
- sodipodi:role="line"
- id="tspan302">336335321320319318317316315314313312311</tspan><tspan
- x="2732.6765 5321.6211 5670.9062 5712.0337 6040.7554 6081.8828 842.30634 883.43323 924.56055"
- y="-4129.4834"
- sodipodi:role="line"
- id="tspan304">182223309</tspan><tspan
- x="842.30634 883.43323 924.56055"
- y="-4240.4385"
- sodipodi:role="line"
- id="tspan306">309</tspan><tspan
- x="1212.1553 1253.2826 1294.4099"
- y="-4129.4834"
- sodipodi:role="line"
- id="tspan308">310</tspan><tspan
- x="1212.1553 1253.2826 1294.4099"
- y="-4240.4385"
- sodipodi:role="line"
- id="tspan310">310</tspan><tspan
- x="6410.605 6451.7319"
- y="-4129.4834"
- sodipodi:role="line"
- id="tspan312">24</tspan><tspan
- x="6390.041 6431.1685 6472.2954"
- y="-4240.4385"
- sodipodi:role="line"
- id="tspan314">337</tspan><tspan
- x="6040.7559 6081.8833"
- y="-4943.1504"
- sodipodi:role="line"
- id="tspan316">23</tspan><tspan
- x="6040.7559 6081.8833"
- y="-5054.106"
- sodipodi:role="line"
- id="tspan318">23</tspan><tspan
- x="6410.605 6451.7324"
- y="-4943.1504"
- sodipodi:role="line"
- id="tspan320">24</tspan><tspan
- x="6410.605 6451.7324"
- y="-5054.106"
- sodipodi:role="line"
- id="tspan322">24</tspan></text>
+ x="4951.772 4581.9229 4212.0737 3842.2244 3490.8677 3102.5259 2321.7004 2362.8276 2403.9551 1951.8512 1992.9785 2034.1057 1582.0022 1623.1293 1664.2563"
+ y="-4129.4834"
+ sodipodi:role="line"
+ id="tspan300">765432313312311</tspan><tspan
+ x="6020.1929 6061.3198 6102.4473 5650.3433 5691.4707 5732.5981 5280.4941 5321.6216 5362.7485 4910.645 4951.7725 4992.8994 4540.7959 4581.9229 4623.0503 4170.9468 4212.0737 4253.2012 3801.0974 3842.2246 3883.3518 3449.7405 3490.8677 3531.9951 3061.3989 3102.5261 3143.6533 2691.5496 2732.677 2773.8042 2321.7004 2362.8276 2403.9551 1951.8512 1992.9785 2034.1057 1582.0022 1623.1293 1664.2563"
+ y="-4240.4385"
+ sodipodi:role="line"
+ id="tspan302">336335321320319318317316315314313312311</tspan><tspan
+ x="2732.6765 5321.6211 5670.9062 5712.0337 6040.7554 6081.8828 842.30634 883.43323 924.56055"
+ y="-4129.4834"
+ sodipodi:role="line"
+ id="tspan304">182223309</tspan><tspan
+ x="842.30634 883.43323 924.56055"
+ y="-4240.4385"
+ sodipodi:role="line"
+ id="tspan306">309</tspan><tspan
+ x="1212.1553 1253.2826 1294.4099"
+ y="-4129.4834"
+ sodipodi:role="line"
+ id="tspan308">310</tspan><tspan
+ x="1212.1553 1253.2826 1294.4099"
+ y="-4240.4385"
+ sodipodi:role="line"
+ id="tspan310">310</tspan><tspan
+ x="6410.605 6451.7319"
+ y="-4129.4834"
+ sodipodi:role="line"
+ id="tspan312">24</tspan><tspan
+ x="6390.041 6431.1685 6472.2954"
+ y="-4240.4385"
+ sodipodi:role="line"
+ id="tspan314">337</tspan><tspan
+ x="6040.7559 6081.8833"
+ y="-4943.1504"
+ sodipodi:role="line"
+ id="tspan316">23</tspan><tspan
+ x="6040.7559 6081.8833"
+ y="-5054.106"
+ sodipodi:role="line"
+ id="tspan318">23</tspan><tspan
+ x="6410.605 6451.7324"
+ y="-4943.1504"
+ sodipodi:role="line"
+ id="tspan320">24</tspan><tspan
+ x="6410.605 6451.7324"
+ y="-5054.106"
+ sodipodi:role="line"
+ id="tspan322">24</tspan></text>
<text
transform="scale(1,-1)"
style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
id="text3671"
x="3550.4165 3591.5437 3628.5286 3649.0923 3669.656 3690.2195 3706.6409 3747.7681 3764.1895"
y="-4462.3472"><tspan
- x="3550.4165 3591.5437 3628.5286 3649.0923 3669.656 3690.2195 3706.6409 3747.7681 3764.1895"
- y="-4462.3472"
- sodipodi:role="line"
- id="tspan3673">1st field</tspan></text>
+ x="3550.4165 3591.5437 3628.5286 3649.0923 3669.656 3690.2195 3706.6409 3747.7681 3764.1895"
+ y="-4462.3472"
+ sodipodi:role="line"
+ id="tspan3673">1st field</tspan></text>
<text
transform="scale(1,-1)"
style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
id="text3675"
x="2732.6792 3823.7344 4193.5835 4581.9253 4951.7744 5321.6235 3472.3777 3102.5283 2321.7029 2362.8303 2403.9575 1951.8538 1992.981 2034.1083 1582.0045 1623.132 1664.259 5670.9062 5712.0337"
y="-4943.1509"><tspan
- x="2732.6792 3823.7344 4193.5835 4581.9253 4951.7744 5321.6235 3472.3777 3102.5283 2321.7029 2362.8303 2403.9575 1951.8538 1992.981 2034.1083 1582.0045 1623.132 1664.259 5670.9062 5712.0337"
- y="-4943.1509"
- sodipodi:role="line"
- id="tspan3677">1456783231231131022</tspan></text>
+ x="2732.6792 3823.7344 4193.5835 4581.9253 4951.7744 5321.6235 3472.3777 3102.5283 2321.7029 2362.8303 2403.9575 1951.8538 1992.981 2034.1083 1582.0045 1623.132 1664.259 5670.9062 5712.0337"
+ y="-4943.1509"
+ sodipodi:role="line"
+ id="tspan3677">1456783231231131022</tspan></text>
<text
transform="scale(1,-1)"
style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
id="text3679"
x="2732.6726 3823.7278 4193.5771 4581.9189 4951.7681 5321.6172 3472.3711 3102.522 2321.6965 2362.8237 2403.9509 1951.8473 1992.9745 2034.1018 1581.998 1623.1254 1664.2524 5670.8999 5712.0269"
y="-5054.1064"><tspan
- x="2732.6726 3823.7278 4193.5771 4581.9189 4951.7681 5321.6172 3472.3711 3102.522 2321.6965 2362.8237 2403.9509 1951.8473 1992.9745 2034.1018 1581.998 1623.1254 1664.2524 5670.8999 5712.0269"
- y="-5054.1064"
- sodipodi:role="line"
- id="tspan3681">1456783262562462322</tspan></text>
+ x="2732.6726 3823.7278 4193.5771 4581.9189 4951.7681 5321.6172 3472.3711 3102.522 2321.6965 2362.8237 2403.9509 1951.8473 1992.9745 2034.1018 1581.998 1623.1254 1664.2524 5670.8999 5712.0269"
+ y="-5054.1064"
+ sodipodi:role="line"
+ id="tspan3681">1456783262562462322</tspan></text>
<text
transform="scale(1,-1)"
style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
id="text3683"
x="842.29962 883.42694 924.55408"
y="-4943.1509"><tspan
- x="842.29962 883.42694 924.55408"
- y="-4943.1509"
- sodipodi:role="line"
- id="tspan3685">308</tspan></text>
+ x="842.29962 883.42694 924.55408"
+ y="-4943.1509"
+ sodipodi:role="line"
+ id="tspan3685">308</tspan></text>
<text
transform="scale(1,-1)"
style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
id="text3687"
x="842.29962 883.42694 924.55408"
y="-5054.1064"><tspan
- x="842.29962 883.42694 924.55408"
- y="-5054.1064"
- sodipodi:role="line"
- id="tspan3689">621</tspan></text>
+ x="842.29962 883.42694 924.55408"
+ y="-5054.1064"
+ sodipodi:role="line"
+ id="tspan3689">621</tspan></text>
<text
transform="scale(1,-1)"
style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
id="text3691"
x="1212.1489 1253.276 1294.4033"
y="-4943.1509"><tspan
- x="1212.1489 1253.276 1294.4033"
- y="-4943.1509"
- sodipodi:role="line"
- id="tspan3693">309</tspan></text>
+ x="1212.1489 1253.276 1294.4033"
+ y="-4943.1509"
+ sodipodi:role="line"
+ id="tspan3693">309</tspan></text>
<text
transform="scale(1,-1)"
style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
id="text3695"
x="1212.1489 1253.276 1294.4033"
y="-5054.1064"><tspan
- x="1212.1489 1253.276 1294.4033"
- y="-5054.1064"
- sodipodi:role="line"
- id="tspan3697">622</tspan></text>
+ x="1212.1489 1253.276 1294.4033"
+ y="-5054.1064"
+ sodipodi:role="line"
+ id="tspan3697">622</tspan></text>
<text
transform="scale(1,-1)"
style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
id="text3699"
x="3538.0635 3579.1907 3620.3179 3661.4451 3682.0088 3702.5723 3718.9937 3760.1208 3776.5422"
y="-3648.6792"><tspan
- x="3538.0635 3579.1907 3620.3179 3661.4451 3682.0088 3702.5723 3718.9937 3760.1208 3776.5422"
- y="-3648.6792"
- sodipodi:role="line"
- id="tspan3701">2nd field</tspan></text>
+ x="3538.0635 3579.1907 3620.3179 3661.4451 3682.0088 3702.5723 3718.9937 3760.1208 3776.5422"
+ y="-3648.6792"
+ sodipodi:role="line"
+ id="tspan3701">2nd field</tspan></text>
<text
transform="scale(1,-1)"
style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
id="text4083"
x="4951.772 4581.9229 4212.0737 3842.2244 3490.8677 3102.5259 2321.7004 2362.8276 2403.9551 1951.8512 1992.9785 2034.1057 1582.0022 1623.1293 1664.2563"
y="-4129.4834"><tspan
- x="4951.772 4581.9229 4212.0737 3842.2244 3490.8677 3102.5259 2321.7004 2362.8276 2403.9551 1951.8512 1992.9785 2034.1057 1582.0022 1623.1293 1664.2563"
- y="-4129.4834"
- sodipodi:role="line"
- id="tspan4085">765432313312311</tspan></text>
+ x="4951.772 4581.9229 4212.0737 3842.2244 3490.8677 3102.5259 2321.7004 2362.8276 2403.9551 1951.8512 1992.9785 2034.1057 1582.0022 1623.1293 1664.2563"
+ y="-4129.4834"
+ sodipodi:role="line"
+ id="tspan4085">765432313312311</tspan></text>
<text
transform="scale(1,-1)"
style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
id="text4087"
x="6020.1929 6061.3198 6102.4473 5650.3433 5691.4707 5732.5981 5280.4941 5321.6216 5362.7485 4910.645 4951.7725 4992.8994 4540.7959 4581.9229 4623.0503 4170.9468 4212.0737 4253.2012 3801.0974 3842.2246 3883.3518 3449.7405 3490.8677 3531.9951 3061.3989 3102.5261 3143.6533 2691.5496 2732.677 2773.8042 2321.7004 2362.8276 2403.9551 1951.8512 1992.9785 2034.1057 1582.0022 1623.1293 1664.2563"
y="-4240.4385"><tspan
- x="6020.1929 6061.3198 6102.4473 5650.3433 5691.4707 5732.5981 5280.4941 5321.6216 5362.7485 4910.645 4951.7725 4992.8994 4540.7959 4581.9229 4623.0503 4170.9468 4212.0737 4253.2012 3801.0974 3842.2246 3883.3518 3449.7405 3490.8677 3531.9951 3061.3989 3102.5261 3143.6533 2691.5496 2732.677 2773.8042 2321.7004 2362.8276 2403.9551 1951.8512 1992.9785 2034.1057 1582.0022 1623.1293 1664.2563"
- y="-4240.4385"
- sodipodi:role="line"
- id="tspan4089">336335321320319318317316315314313312311</tspan></text>
+ x="6020.1929 6061.3198 6102.4473 5650.3433 5691.4707 5732.5981 5280.4941 5321.6216 5362.7485 4910.645 4951.7725 4992.8994 4540.7959 4581.9229 4623.0503 4170.9468 4212.0737 4253.2012 3801.0974 3842.2246 3883.3518 3449.7405 3490.8677 3531.9951 3061.3989 3102.5261 3143.6533 2691.5496 2732.677 2773.8042 2321.7004 2362.8276 2403.9551 1951.8512 1992.9785 2034.1057 1582.0022 1623.1293 1664.2563"
+ y="-4240.4385"
+ sodipodi:role="line"
+ id="tspan4089">336335321320319318317316315314313312311</tspan></text>
<text
transform="scale(1,-1)"
style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
id="text4091"
x="2732.6765 5321.6211 5670.9062 5712.0337 6040.7554 6081.8828 842.30634 883.43323 924.56055"
y="-4129.4834"><tspan
- x="2732.6765 5321.6211 5670.9062 5712.0337 6040.7554 6081.8828 842.30634 883.43323 924.56055"
- y="-4129.4834"
- sodipodi:role="line"
- id="tspan4093">182223309</tspan></text>
+ x="2732.6765 5321.6211 5670.9062 5712.0337 6040.7554 6081.8828 842.30634 883.43323 924.56055"
+ y="-4129.4834"
+ sodipodi:role="line"
+ id="tspan4093">182223309</tspan></text>
<text
transform="scale(1,-1)"
style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
id="text4095"
x="842.30634 883.43323 924.56055"
y="-4240.4385"><tspan
- x="842.30634 883.43323 924.56055"
- y="-4240.4385"
- sodipodi:role="line"
- id="tspan4097">309</tspan></text>
+ x="842.30634 883.43323 924.56055"
+ y="-4240.4385"
+ sodipodi:role="line"
+ id="tspan4097">309</tspan></text>
<text
transform="scale(1,-1)"
style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
id="text4099"
x="1212.1553 1253.2826 1294.4099"
y="-4129.4834"><tspan
- x="1212.1553 1253.2826 1294.4099"
- y="-4129.4834"
- sodipodi:role="line"
- id="tspan4101">310</tspan></text>
+ x="1212.1553 1253.2826 1294.4099"
+ y="-4129.4834"
+ sodipodi:role="line"
+ id="tspan4101">310</tspan></text>
<text
transform="scale(1,-1)"
style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
id="text4103"
x="1212.1553 1253.2826 1294.4099"
y="-4240.4385"><tspan
- x="1212.1553 1253.2826 1294.4099"
- y="-4240.4385"
- sodipodi:role="line"
- id="tspan4105">310</tspan></text>
+ x="1212.1553 1253.2826 1294.4099"
+ y="-4240.4385"
+ sodipodi:role="line"
+ id="tspan4105">310</tspan></text>
<text
transform="scale(1,-1)"
style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
id="text4107"
x="6410.605 6451.7319"
y="-4129.4834"><tspan
- x="6410.605 6451.7319"
- y="-4129.4834"
- sodipodi:role="line"
- id="tspan4109">24</tspan></text>
+ x="6410.605 6451.7319"
+ y="-4129.4834"
+ sodipodi:role="line"
+ id="tspan4109">24</tspan></text>
<text
transform="scale(1,-1)"
style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
id="text4111"
x="6390.041 6431.1685 6472.2954"
y="-4240.4385"><tspan
- x="6390.041 6431.1685 6472.2954"
- y="-4240.4385"
- sodipodi:role="line"
- id="tspan4113">337</tspan></text>
+ x="6390.041 6431.1685 6472.2954"
+ y="-4240.4385"
+ sodipodi:role="line"
+ id="tspan4113">337</tspan></text>
<text
transform="scale(1,-1)"
style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
id="text4115"
x="6040.7559 6081.8833"
y="-4943.1504"><tspan
- x="6040.7559 6081.8833"
- y="-4943.1504"
- sodipodi:role="line"
- id="tspan4117">23</tspan></text>
+ x="6040.7559 6081.8833"
+ y="-4943.1504"
+ sodipodi:role="line"
+ id="tspan4117">23</tspan></text>
<text
transform="scale(1,-1)"
style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
id="text4119"
x="6040.7559 6081.8833"
y="-5054.106"><tspan
- x="6040.7559 6081.8833"
- y="-5054.106"
- sodipodi:role="line"
- id="tspan4121">23</tspan></text>
+ x="6040.7559 6081.8833"
+ y="-5054.106"
+ sodipodi:role="line"
+ id="tspan4121">23</tspan></text>
<text
transform="scale(1,-1)"
style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
id="text4123"
x="6410.605 6451.7324"
y="-4943.1504"><tspan
- x="6410.605 6451.7324"
- y="-4943.1504"
- sodipodi:role="line"
- id="tspan4125">24</tspan></text>
+ x="6410.605 6451.7324"
+ y="-4943.1504"
+ sodipodi:role="line"
+ id="tspan4125">24</tspan></text>
<text
transform="scale(1,-1)"
style="font-variant:normal;font-weight:normal;font-size:73.96984863px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
id="text4127"
x="6410.605 6451.7324"
y="-5054.106"><tspan
- x="6410.605 6451.7324"
- y="-5054.106"
- sodipodi:role="line"
- id="tspan4129">24</tspan></text>
+ x="6410.605 6451.7324"
+ y="-5054.106"
+ sodipodi:role="line"
+ id="tspan4129">24</tspan></text>
</g></svg>
\ No newline at end of file
diff --git a/Documentation/media/uapi/v4l/vbi_hsync.svg b/Documentation/media/uapi/v4l/vbi_hsync.svg
index 4d5c0b4..e17ff83 100644
--- a/Documentation/media/uapi/v4l/vbi_hsync.svg
+++ b/Documentation/media/uapi/v4l/vbi_hsync.svg
@@ -42,27 +42,27 @@
fit-margin-right="0"
fit-margin-bottom="0" /><metadata
id="metadata8"><rdf:RDF><cc:Work
- rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
- rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title /></cc:Work></rdf:RDF></metadata><defs
+ rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
+ rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title /></cc:Work></rdf:RDF></metadata><defs
id="defs6"><clipPath
clipPathUnits="userSpaceOnUse"
id="clipPath30"><path
- d="m 0,0 0,1163 1544,0 L 1544,0 0,0 Z m 187.184,836.05 0,-19.278 48.517,0 -38.556,9.639 38.556,9.639 -48.517,0 z m 689.189,-19.278 0,19.278 -48.516,0 38.556,-9.639 -38.556,-9.639 48.516,0 z"
- id="path32"
- inkscape:connector-curvature="0"
- style="clip-rule:evenodd" /></clipPath><clipPath
+ d="m 0,0 0,1163 1544,0 L 1544,0 0,0 Z m 187.184,836.05 0,-19.278 48.517,0 -38.556,9.639 38.556,9.639 -48.517,0 z m 689.189,-19.278 0,19.278 -48.516,0 38.556,-9.639 -38.556,-9.639 48.516,0 z"
+ id="path32"
+ inkscape:connector-curvature="0"
+ style="clip-rule:evenodd" /></clipPath><clipPath
clipPathUnits="userSpaceOnUse"
id="clipPath52"><path
- d="m 0,0 0,1163 1544,0 L 1544,0 0,0 Z m 804.08,79.3887 0,19.2778 -48.516,0 38.556,-9.6389 -38.556,-9.6389 48.516,0 z m -703.647,19.2778 0,-19.2778 48.517,0 -38.556,9.6389 38.556,9.6389 -48.517,0 z"
- id="path54"
- inkscape:connector-curvature="0"
- style="clip-rule:evenodd" /></clipPath><clipPath
+ d="m 0,0 0,1163 1544,0 L 1544,0 0,0 Z m 804.08,79.3887 0,19.2778 -48.516,0 38.556,-9.6389 -38.556,-9.6389 48.516,0 z m -703.647,19.2778 0,-19.2778 48.517,0 -38.556,9.6389 38.556,9.6389 -48.517,0 z"
+ id="path54"
+ inkscape:connector-curvature="0"
+ style="clip-rule:evenodd" /></clipPath><clipPath
clipPathUnits="userSpaceOnUse"
id="clipPath94"><path
- d="m 0,0 0,1163 1544,0 L 1544,0 0,0 Z m 471.535,195.057 0,19.278 -48.516,0 38.555,-9.639 -38.555,-9.639 48.516,0 z m -284.351,19.278 0,-19.278 48.517,0 -38.556,9.639 38.556,9.639 -48.517,0 z"
- id="path96"
- inkscape:connector-curvature="0"
- style="clip-rule:evenodd" /></clipPath></defs><g
+ d="m 0,0 0,1163 1544,0 L 1544,0 0,0 Z m 471.535,195.057 0,19.278 -48.516,0 38.555,-9.639 -38.555,-9.639 48.516,0 z m -284.351,19.278 0,-19.278 48.517,0 -38.556,9.639 38.556,9.639 -48.517,0 z"
+ id="path96"
+ inkscape:connector-curvature="0"
+ style="clip-rule:evenodd" /></clipPath></defs><g
id="g10"
inkscape:groupmode="layer"
inkscape:label="vbi_hsync"
@@ -70,69 +70,69 @@
id="g14"
transform="matrix(0.36030235,0,0,0.36030235,-0.75498483,-1.0743684)"
style=""><path
- inkscape:connector-curvature="0"
- id="path16"
- style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="M 32.9604,580.617 4.04346,493.866" /><path
- inkscape:connector-curvature="0"
- id="path18"
- style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 192.004,855.328 0,-665.091" /><path
- inkscape:connector-curvature="0"
- id="path20"
- style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 466.715,392.656 0,-202.419" /><path
- inkscape:connector-curvature="0"
- id="path22"
- style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 799.261,508.324 0,-433.7549" /><path
- inkscape:connector-curvature="0"
- id="path24"
- style="fill:none;stroke:#000000;stroke-width:4.81949997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 857.095,537.241 231.335,0" /></g><g
+ inkscape:connector-curvature="0"
+ id="path16"
+ style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="M 32.9604,580.617 4.04346,493.866" /><path
+ inkscape:connector-curvature="0"
+ id="path18"
+ style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 192.004,855.328 0,-665.091" /><path
+ inkscape:connector-curvature="0"
+ id="path20"
+ style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 466.715,392.656 0,-202.419" /><path
+ inkscape:connector-curvature="0"
+ id="path22"
+ style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 799.261,508.324 0,-433.7549" /><path
+ inkscape:connector-curvature="0"
+ id="path24"
+ style="fill:none;stroke:#000000;stroke-width:4.81949997;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 857.095,537.241 231.335,0" /></g><g
id="g26"
transform="matrix(0.36030235,0,0,0.36030235,-0.75498483,-1.0743684)"
style=""><g
- clip-path="url(#clipPath30)"
- id="g28"
- style=""><path
- inkscape:connector-curvature="0"
- id="path34"
- style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 871.553,826.411 -679.549,0" /></g></g><g
+ clip-path="url(#clipPath30)"
+ id="g28"
+ style=""><path
+ inkscape:connector-curvature="0"
+ id="path34"
+ style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 871.553,826.411 -679.549,0" /></g></g><g
id="g36"
transform="matrix(0.36030235,0,0,0.36030235,-0.75498483,-1.0743684)"
style=""><path
- inkscape:connector-curvature="0"
- id="path38"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
- d="m 827.857,816.772 38.556,9.639 -38.556,9.639 0,-19.278" /><path
- inkscape:connector-curvature="0"
- id="path40"
- style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 827.857,816.772 38.556,9.639 -38.556,9.639 0,-19.278 z" /><path
- inkscape:connector-curvature="0"
- id="path42"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
- d="m 235.701,836.05 -38.556,-9.639 38.556,-9.639 0,19.278" /><path
- inkscape:connector-curvature="0"
- id="path44"
- style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 235.701,836.05 -38.556,-9.639 38.556,-9.639 0,19.278 z" /><path
- inkscape:connector-curvature="0"
- id="path46"
- style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 1073.97,493.866 28.92,86.751" /></g><g
+ inkscape:connector-curvature="0"
+ id="path38"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+ d="m 827.857,816.772 38.556,9.639 -38.556,9.639 0,-19.278" /><path
+ inkscape:connector-curvature="0"
+ id="path40"
+ style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 827.857,816.772 38.556,9.639 -38.556,9.639 0,-19.278 z" /><path
+ inkscape:connector-curvature="0"
+ id="path42"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
+ d="m 235.701,836.05 -38.556,-9.639 38.556,-9.639 0,19.278" /><path
+ inkscape:connector-curvature="0"
+ id="path44"
+ style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 235.701,836.05 -38.556,-9.639 38.556,-9.639 0,19.278 z" /><path
+ inkscape:connector-curvature="0"
+ id="path46"
+ style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 1073.97,493.866 28.92,86.751" /></g><g
id="g48"
transform="matrix(0.36030235,0,0,0.36030235,-0.75498483,-1.0743684)"
style=""><g
- clip-path="url(#clipPath52)"
- id="g50"
- style=""><path
- inkscape:connector-curvature="0"
- id="path56"
- style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 105.253,89.0276 694.008,0" /></g></g><path
+ clip-path="url(#clipPath52)"
+ id="g50"
+ style=""><path
+ inkscape:connector-curvature="0"
+ id="path56"
+ style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 105.253,89.0276 694.008,0" /></g></g><path
d="m 52.91205,34.475403 -13.891817,-3.472918 13.891817,-3.472918 0,6.945836"
style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
id="path60"
@@ -196,13 +196,13 @@
id="g90"
transform="matrix(0.36030235,0,0,0.36030235,-0.75498483,-1.0743684)"
style=""><g
- clip-path="url(#clipPath94)"
- id="g92"
- style=""><path
- inkscape:connector-curvature="0"
- id="path98"
- style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
- d="m 192.004,204.696 274.711,0" /></g></g><path
+ clip-path="url(#clipPath94)"
+ id="g92"
+ style=""><path
+ inkscape:connector-curvature="0"
+ id="path98"
+ style="fill:none;stroke:#000000;stroke-width:2.40974998;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+ d="m 192.004,204.696 274.711,0" /></g></g><path
d="m 84.168639,76.151036 -13.891817,-3.472955 13.891817,-3.472954 0,6.945909"
style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none"
id="path102"
@@ -224,90 +224,90 @@
transform="scale(1,-1)"
x="438.29504"
y="-187.28558"><tspan
- id="tspan114"
- sodipodi:role="line"
- y="-187.28558"
- x="438.29504 452.19382 456.81979 468.40555 478.82443 489.24329 495.03619 506.62195 518.2077 528.62659 540.21234">Black Level</tspan><tspan
- id="tspan116"
- sodipodi:role="line"
- y="-83.096947"
- x="438.29504 452.19382 462.61267 474.19846 484.61731 490.41019 501.99597 513.58173 524.00061 535.58636">Sync Level</tspan><tspan
- id="tspan118"
- sodipodi:role="line"
- y="-395.66284"
- x="438.29504 457.96585 469.55164 474.17761 479.97049 491.55627 497.34915 508.93494 520.52069 530.93958 542.52533">White Level</tspan></text>
+ id="tspan114"
+ sodipodi:role="line"
+ y="-187.28558"
+ x="438.29504 452.19382 456.81979 468.40555 478.82443 489.24329 495.03619 506.62195 518.2077 528.62659 540.21234">Black Level</tspan><tspan
+ id="tspan116"
+ sodipodi:role="line"
+ y="-83.096947"
+ x="438.29504 452.19382 462.61267 474.19846 484.61731 490.41019 501.99597 513.58173 524.00061 535.58636">Sync Level</tspan><tspan
+ id="tspan118"
+ sodipodi:role="line"
+ y="-395.66284"
+ x="438.29504 457.96585 469.55164 474.17761 479.97049 491.55627 497.34915 508.93494 520.52069 530.93958 542.52533">White Level</tspan></text>
<text
id="text120"
style="font-variant:normal;font-weight:normal;font-size:20.83772659px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"
x="159.88258"
y="-270.63647"><tspan
- id="tspan122"
- sodipodi:role="line"
- y="-270.63647"
- x="159.88258 172.61443 179.55339 186.49236 198.07812 209.66391">offset</tspan></text>
+ id="tspan122"
+ sodipodi:role="line"
+ y="-270.63647"
+ x="159.88258 172.61443 179.55339 186.49236 198.07812 209.66391">offset</tspan></text>
<text
id="text124"
style="font-variant:normal;font-weight:normal;font-size:20.83772659px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"
x="46.973549"
y="-46.630745"><tspan
- id="tspan126"
- sodipodi:role="line"
- y="-46.630745"
- x="46.973549 58.559322 63.185299 74.771072 86.35685 92.149734 102.5686 112.98746 124.57324 134.9921 146.57788 153.51685 159.30972 165.10262 176.68839 188.27417 192.90015 203.319">Line synchr. pulse</tspan><tspan
- id="tspan128"
- sodipodi:role="line"
- y="-4.9552913"
- x="100.80776 112.39354 117.01952 128.60529 140.19107 145.98395 157.56973 162.19569 173.78148 185.36726 195.78612 200.41209 211.99788">Line blanking</tspan></text>
+ id="tspan126"
+ sodipodi:role="line"
+ y="-46.630745"
+ x="46.973549 58.559322 63.185299 74.771072 86.35685 92.149734 102.5686 112.98746 124.57324 134.9921 146.57788 153.51685 159.30972 165.10262 176.68839 188.27417 192.90015 203.319">Line synchr. pulse</tspan><tspan
+ id="tspan128"
+ sodipodi:role="line"
+ y="-4.9552913"
+ x="100.80776 112.39354 117.01952 128.60529 140.19107 145.98395 157.56973 162.19569 173.78148 185.36726 195.78612 200.41209 211.99788">Line blanking</tspan></text>
<text
id="text3473"
style="font-variant:normal;font-weight:normal;font-size:20.83772659px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"
x="46.973549 58.559322 63.185299 74.771072 86.35685 92.149734 102.5686 112.98746 124.57324 134.9921 146.57788 153.51685 159.30972 165.10262 176.68839 188.27417 192.90015 203.319"
y="-46.630745"><tspan
- id="tspan3475"
- sodipodi:role="line"
- y="-46.630745"
- x="46.973549 58.559322 63.185299 74.771072 86.35685 92.149734 102.5686 112.98746 124.57324 134.9921 146.57788 153.51685 159.30972 165.10262 176.68839 188.27417 192.90015 203.319">Line synchr. pulse</tspan></text>
+ id="tspan3475"
+ sodipodi:role="line"
+ y="-46.630745"
+ x="46.973549 58.559322 63.185299 74.771072 86.35685 92.149734 102.5686 112.98746 124.57324 134.9921 146.57788 153.51685 159.30972 165.10262 176.68839 188.27417 192.90015 203.319">Line synchr. pulse</tspan></text>
<text
id="text3477"
style="font-variant:normal;font-weight:normal;font-size:20.83772659px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"
x="100.80776 112.39354 117.01952 128.60529 140.19107 145.98395 157.56973 162.19569 173.78148 185.36726 195.78612 200.41209 211.99788"
y="-4.9552913"><tspan
- id="tspan3479"
- sodipodi:role="line"
- y="-4.9552913"
- x="100.80776 112.39354 117.01952 128.60529 140.19107 145.98395 157.56973 162.19569 173.78148 185.36726 195.78612 200.41209 211.99788">Line blanking</tspan></text>
+ id="tspan3479"
+ sodipodi:role="line"
+ y="-4.9552913"
+ x="100.80776 112.39354 117.01952 128.60529 140.19107 145.98395 157.56973 162.19569 173.78148 185.36726 195.78612 200.41209 211.99788">Line blanking</tspan></text>
<text
id="text3607"
style="font-variant:normal;font-weight:normal;font-size:20.83772659px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"
x="438.29504 452.19382 456.81979 468.40555 478.82443 489.24329 495.03619 506.62195 518.2077 528.62659 540.21234"
y="-187.28558"><tspan
- id="tspan3609"
- sodipodi:role="line"
- y="-187.28558"
- x="438.29504 452.19382 456.81979 468.40555 478.82443 489.24329 495.03619 506.62195 518.2077 528.62659 540.21234">Black Level</tspan></text>
+ id="tspan3609"
+ sodipodi:role="line"
+ y="-187.28558"
+ x="438.29504 452.19382 456.81979 468.40555 478.82443 489.24329 495.03619 506.62195 518.2077 528.62659 540.21234">Black Level</tspan></text>
<text
id="text3611"
style="font-variant:normal;font-weight:normal;font-size:20.83772659px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"
x="438.29504 452.19382 462.61267 474.19846 484.61731 490.41019 501.99597 513.58173 524.00061 535.58636"
y="-83.096947"><tspan
- id="tspan3613"
- sodipodi:role="line"
- y="-83.096947"
- x="438.29504 452.19382 462.61267 474.19846 484.61731 490.41019 501.99597 513.58173 524.00061 535.58636">Sync Level</tspan></text>
+ id="tspan3613"
+ sodipodi:role="line"
+ y="-83.096947"
+ x="438.29504 452.19382 462.61267 474.19846 484.61731 490.41019 501.99597 513.58173 524.00061 535.58636">Sync Level</tspan></text>
<text
id="text3615"
style="font-variant:normal;font-weight:normal;font-size:20.83772659px;font-family:sans-serif;-inkscape-font-specification:sans-serif;writing-mode:lr-tb;fill:#000000;fill-opacity:1;fill-rule:nonzero;stroke:none;font-style:normal;font-stretch:normal;"
transform="scale(1,-1)"
x="438.29504 457.96585 469.55164 474.17761 479.97049 491.55627 497.34915 508.93494 520.52069 530.93958 542.52533"
y="-395.66284"><tspan
- id="tspan3617"
- sodipodi:role="line"
- y="-395.66284"
- x="438.29504 457.96585 469.55164 474.17761 479.97049 491.55627 497.34915 508.93494 520.52069 530.93958 542.52533">White Level</tspan></text>
+ id="tspan3617"
+ sodipodi:role="line"
+ y="-395.66284"
+ x="438.29504 457.96585 469.55164 474.17761 479.97049 491.55627 497.34915 508.93494 520.52069 530.93958 542.52533">White Level</tspan></text>
</g></svg>
\ No newline at end of file
diff --git a/Documentation/media/uapi/v4l/vidioc-g-fmt.rst b/Documentation/media/uapi/v4l/vidioc-g-fmt.rst
index b853e48..d082f9a 100644
--- a/Documentation/media/uapi/v4l/vidioc-g-fmt.rst
+++ b/Documentation/media/uapi/v4l/vidioc-g-fmt.rst
@@ -147,3 +147,9 @@
EINVAL
The struct :c:type:`v4l2_format` ``type`` field is
invalid or the requested buffer type not supported.
+
+EBUSY
+ The device is busy and cannot change the format. This could be
+ because or the device is streaming or buffers are allocated or
+ queued to the driver. Relevant for :ref:`VIDIOC_S_FMT
+ <VIDIOC_G_FMT>` only.
diff --git a/Documentation/media/v4l-drivers/imx.rst b/Documentation/media/v4l-drivers/imx.rst
index e0ee0f1..3c4f58b 100644
--- a/Documentation/media/v4l-drivers/imx.rst
+++ b/Documentation/media/v4l-drivers/imx.rst
@@ -607,8 +607,9 @@
Authors
-------
-Steve Longerbeam <steve_longerbeam@mentor.com>
-Philipp Zabel <kernel@pengutronix.de>
-Russell King <linux@armlinux.org.uk>
+
+- Steve Longerbeam <steve_longerbeam@mentor.com>
+- Philipp Zabel <kernel@pengutronix.de>
+- Russell King <linux@armlinux.org.uk>
Copyright (C) 2012-2017 Mentor Graphics Inc.
diff --git a/Documentation/media/v4l-drivers/index.rst b/Documentation/media/v4l-drivers/index.rst
index 2e24d68..10f2ce42 100644
--- a/Documentation/media/v4l-drivers/index.rst
+++ b/Documentation/media/v4l-drivers/index.rst
@@ -41,6 +41,7 @@
cx88
davinci-vpbe
fimc
+ imx
ivtv
max2175
meye
diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt
index c239a0c..c4ddfcd 100644
--- a/Documentation/memory-barriers.txt
+++ b/Documentation/memory-barriers.txt
@@ -1876,8 +1876,8 @@
This makes sure that the death mark on the object is perceived to be set
*before* the reference counter is decremented.
- See Documentation/atomic_ops.txt for more information. See the "Atomic
- operations" subsection for information on where to use these.
+ See Documentation/core-api/atomic_ops.rst for more information. See the
+ "Atomic operations" subsection for information on where to use these.
(*) lockless_dereference();
@@ -2584,7 +2584,7 @@
barriers, and so barrier instructions are superfluous in conjunction with them,
and in such cases the special barrier primitives will be no-ops.
-See Documentation/atomic_ops.txt for more information.
+See Documentation/core-api/atomic_ops.rst for more information.
ACCESSING DEVICES
diff --git a/Documentation/memory-hotplug.txt b/Documentation/memory-hotplug.txt
index 5c628e1..7f49ebf 100644
--- a/Documentation/memory-hotplug.txt
+++ b/Documentation/memory-hotplug.txt
@@ -2,43 +2,48 @@
Memory Hotplug
==============
-Created: Jul 28 2007
-Add description of notifier of memory hotplug Oct 11 2007
+:Created: Jul 28 2007
+:Updated: Add description of notifier of memory hotplug: Oct 11 2007
This document is about memory hotplug including how-to-use and current status.
Because Memory Hotplug is still under development, contents of this text will
be changed often.
-1. Introduction
- 1.1 purpose of memory hotplug
- 1.2. Phases of memory hotplug
- 1.3. Unit of Memory online/offline operation
-2. Kernel Configuration
-3. sysfs files for memory hotplug
-4. Physical memory hot-add phase
- 4.1 Hardware(Firmware) Support
- 4.2 Notify memory hot-add event by hand
-5. Logical Memory hot-add phase
- 5.1. State of memory
- 5.2. How to online memory
-6. Logical memory remove
- 6.1 Memory offline and ZONE_MOVABLE
- 6.2. How to offline memory
-7. Physical memory remove
-8. Memory hotplug event notifier
-9. Future Work List
+.. CONTENTS
-Note(1): x86_64's has special implementation for memory hotplug.
- This text does not describe it.
-Note(2): This text assumes that sysfs is mounted at /sys.
+ 1. Introduction
+ 1.1 purpose of memory hotplug
+ 1.2. Phases of memory hotplug
+ 1.3. Unit of Memory online/offline operation
+ 2. Kernel Configuration
+ 3. sysfs files for memory hotplug
+ 4. Physical memory hot-add phase
+ 4.1 Hardware(Firmware) Support
+ 4.2 Notify memory hot-add event by hand
+ 5. Logical Memory hot-add phase
+ 5.1. State of memory
+ 5.2. How to online memory
+ 6. Logical memory remove
+ 6.1 Memory offline and ZONE_MOVABLE
+ 6.2. How to offline memory
+ 7. Physical memory remove
+ 8. Memory hotplug event notifier
+ 9. Future Work List
----------------
-1. Introduction
----------------
+.. note::
-1.1 purpose of memory hotplug
-------------
+ (1) x86_64's has special implementation for memory hotplug.
+ This text does not describe it.
+ (2) This text assumes that sysfs is mounted at /sys.
+
+
+Introduction
+============
+
+purpose of memory hotplug
+-------------------------
+
Memory Hotplug allows users to increase/decrease the amount of memory.
Generally, there are two purposes.
@@ -53,9 +58,11 @@
Linux memory hotplug is designed for both purpose.
-1.2. Phases of memory hotplug
----------------
-There are 2 phases in Memory Hotplug.
+Phases of memory hotplug
+------------------------
+
+There are 2 phases in Memory Hotplug:
+
1) Physical Memory Hotplug phase
2) Logical Memory Hotplug phase.
@@ -70,7 +77,7 @@
If firmware supports notification of connection of new memory to OS,
this phase is triggered automatically. ACPI can notify this event. If not,
"probe" operation by system administration is used instead.
-(see Section 4.).
+(see :ref:`memory_hotplug_physical_mem`).
Logical Memory Hotplug phase is to change memory state into
available/unavailable for users. Amount of memory from user's view is
@@ -83,11 +90,12 @@
administrator. For the hot-add case, it must be executed after Physical Hotplug
phase by hand.
(However, if you writes udev's hotplug scripts for memory hotplug, these
- phases can be execute in seamless way.)
+phases can be execute in seamless way.)
-1.3. Unit of Memory online/offline operation
-------------
+Unit of Memory online/offline operation
+---------------------------------------
+
Memory hotplug uses SPARSEMEM memory model which allows memory to be divided
into chunks of the same size. These chunks are called "sections". The size of
a memory section is architecture dependent. For example, power uses 16MiB, ia64
@@ -97,46 +105,50 @@
size of a memory block is architecture dependent and represents the logical
unit upon which memory online/offline operations are to be performed. The
default size of a memory block is the same as memory section size unless an
-architecture specifies otherwise. (see Section 3.)
+architecture specifies otherwise. (see :ref:`memory_hotplug_sysfs_files`.)
To determine the size (in bytes) of a memory block please read this file:
/sys/devices/system/memory/block_size_bytes
------------------------
-2. Kernel Configuration
------------------------
+Kernel Configuration
+====================
+
To use memory hotplug feature, kernel must be compiled with following
config options.
-- For all memory hotplug
- Memory model -> Sparse Memory (CONFIG_SPARSEMEM)
- Allow for memory hot-add (CONFIG_MEMORY_HOTPLUG)
+- For all memory hotplug:
+ - Memory model -> Sparse Memory (CONFIG_SPARSEMEM)
+ - Allow for memory hot-add (CONFIG_MEMORY_HOTPLUG)
-- To enable memory removal, the following are also necessary
- Allow for memory hot remove (CONFIG_MEMORY_HOTREMOVE)
- Page Migration (CONFIG_MIGRATION)
+- To enable memory removal, the following are also necessary:
+ - Allow for memory hot remove (CONFIG_MEMORY_HOTREMOVE)
+ - Page Migration (CONFIG_MIGRATION)
-- For ACPI memory hotplug, the following are also necessary
- Memory hotplug (under ACPI Support menu) (CONFIG_ACPI_HOTPLUG_MEMORY)
- This option can be kernel module.
+- For ACPI memory hotplug, the following are also necessary:
+ - Memory hotplug (under ACPI Support menu) (CONFIG_ACPI_HOTPLUG_MEMORY)
+ - This option can be kernel module.
- As a related configuration, if your box has a feature of NUMA-node hotplug
via ACPI, then this option is necessary too.
- ACPI0004,PNP0A05 and PNP0A06 Container Driver (under ACPI Support menu)
- (CONFIG_ACPI_CONTAINER).
- This option can be kernel module too.
+
+ - ACPI0004,PNP0A05 and PNP0A06 Container Driver (under ACPI Support menu)
+ (CONFIG_ACPI_CONTAINER).
+
+ This option can be kernel module too.
---------------------------------
-3 sysfs files for memory hotplug
---------------------------------
+.. _memory_hotplug_sysfs_files:
+
+sysfs files for memory hotplug
+==============================
+
All memory blocks have their device information in sysfs. Each memory block
-is described under /sys/devices/system/memory as
+is described under /sys/devices/system/memory as:
-/sys/devices/system/memory/memoryXXX
-(XXX is the memory block id.)
+ /sys/devices/system/memory/memoryXXX
+ (XXX is the memory block id.)
For the memory block covered by the sysfs directory. It is expected that all
memory sections in this range are present and no memory holes exist in the
@@ -145,43 +157,53 @@
block.
For example, assume 1GiB memory block size. A device for a memory starting at
-0x100000000 is /sys/device/system/memory/memory4
-(0x100000000 / 1Gib = 4)
+0x100000000 is /sys/device/system/memory/memory4::
+
+ (0x100000000 / 1Gib = 4)
+
This device covers address range [0x100000000 ... 0x140000000)
Under each memory block, you can see 5 files:
-/sys/devices/system/memory/memoryXXX/phys_index
-/sys/devices/system/memory/memoryXXX/phys_device
-/sys/devices/system/memory/memoryXXX/state
-/sys/devices/system/memory/memoryXXX/removable
-/sys/devices/system/memory/memoryXXX/valid_zones
+- /sys/devices/system/memory/memoryXXX/phys_index
+- /sys/devices/system/memory/memoryXXX/phys_device
+- /sys/devices/system/memory/memoryXXX/state
+- /sys/devices/system/memory/memoryXXX/removable
+- /sys/devices/system/memory/memoryXXX/valid_zones
-'phys_index' : read-only and contains memory block id, same as XXX.
-'state' : read-write
- at read: contains online/offline state of memory.
- at write: user can specify "online_kernel",
+=================== ============================================================
+``phys_index`` read-only and contains memory block id, same as XXX.
+``state`` read-write
+
+ - at read: contains online/offline state of memory.
+ - at write: user can specify "online_kernel",
+
"online_movable", "online", "offline" command
which will be performed on all sections in the block.
-'phys_device' : read-only: designed to show the name of physical memory
+``phys_device`` read-only: designed to show the name of physical memory
device. This is not well implemented now.
-'removable' : read-only: contains an integer value indicating
+``removable`` read-only: contains an integer value indicating
whether the memory block is removable or not
removable. A value of 1 indicates that the memory
block is removable and a value of 0 indicates that
it is not removable. A memory block is removable only if
every section in the block is removable.
-'valid_zones' : read-only: designed to show which zones this memory block
+``valid_zones`` read-only: designed to show which zones this memory block
can be onlined to.
- The first column shows it's default zone.
+
+ The first column shows it`s default zone.
+
"memory6/valid_zones: Normal Movable" shows this memoryblock
can be onlined to ZONE_NORMAL by default and to ZONE_MOVABLE
by online_movable.
+
"memory7/valid_zones: Movable Normal" shows this memoryblock
can be onlined to ZONE_MOVABLE by default and to ZONE_NORMAL
by online_kernel.
+=================== ============================================================
-NOTE:
+.. note::
+
These directories/files appear after physical memory hotplug phase.
If CONFIG_NUMA is enabled the memoryXXX/ directories can also be accessed
@@ -193,13 +215,14 @@
A backlink will also be created:
/sys/devices/system/memory/memory9/node0 -> ../../node/node0
+.. _memory_hotplug_physical_mem:
---------------------------------
-4. Physical memory hot-add phase
---------------------------------
+Physical memory hot-add phase
+=============================
-4.1 Hardware(Firmware) Support
-------------
+Hardware(Firmware) Support
+--------------------------
+
On x86_64/ia64 platform, memory hotplug by ACPI is supported.
In general, the firmware (ACPI) which supports memory hotplug defines
@@ -209,7 +232,8 @@
But scripts for memory hotplug are not contained in generic udev package(now).
You may have to write it by yourself or online/offline memory by hand.
-Please see "How to online memory", "How to offline memory" in this text.
+Please see :ref:`memory_hotplug_how_to_online_memory` and
+:ref:`memory_hotplug_how_to_offline_memory`.
If firmware supports NUMA-node hotplug, and defines an object _HID "ACPI0004",
"PNP0A05", or "PNP0A06", notification is asserted to it, and ACPI handler
@@ -217,8 +241,9 @@
If memory device is found, memory hotplug code will be called.
-4.2 Notify memory hot-add event by hand
-------------
+Notify memory hot-add event by hand
+-----------------------------------
+
On some architectures, the firmware may not notify the kernel of a memory
hotplug event. Therefore, the memory "probe" interface is supported to
explicitly notify the kernel. This interface depends on
@@ -229,45 +254,48 @@
Probe interface is located at
/sys/devices/system/memory/probe
-You can tell the physical address of new memory to the kernel by
+You can tell the physical address of new memory to the kernel by::
-% echo start_address_of_new_memory > /sys/devices/system/memory/probe
+ % echo start_address_of_new_memory > /sys/devices/system/memory/probe
Then, [start_address_of_new_memory, start_address_of_new_memory +
memory_block_size] memory range is hot-added. In this case, hotplug script is
not called (in current implementation). You'll have to online memory by
-yourself. Please see "How to online memory" in this text.
+yourself. Please see :ref:`memory_hotplug_how_to_online_memory`.
-------------------------------
-5. Logical Memory hot-add phase
-------------------------------
+Logical Memory hot-add phase
+============================
-5.1. State of memory
-------------
-To see (online/offline) state of a memory block, read 'state' file.
+State of memory
+---------------
-% cat /sys/device/system/memory/memoryXXX/state
+To see (online/offline) state of a memory block, read 'state' file::
+
+ % cat /sys/device/system/memory/memoryXXX/state
-If the memory block is online, you'll read "online".
-If the memory block is offline, you'll read "offline".
+- If the memory block is online, you'll read "online".
+- If the memory block is offline, you'll read "offline".
-5.2. How to online memory
-------------
+.. _memory_hotplug_how_to_online_memory:
+
+How to online memory
+--------------------
+
When the memory is hot-added, the kernel decides whether or not to "online"
-it according to the policy which can be read from "auto_online_blocks" file:
+it according to the policy which can be read from "auto_online_blocks" file::
-% cat /sys/devices/system/memory/auto_online_blocks
+ % cat /sys/devices/system/memory/auto_online_blocks
The default depends on the CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE kernel config
option. If it is disabled the default is "offline" which means the newly added
memory is not in a ready-to-use state and you have to "online" the newly added
memory blocks manually. Automatic onlining can be requested by writing "online"
-to "auto_online_blocks" file:
+to "auto_online_blocks" file::
-% echo online > /sys/devices/system/memory/auto_online_blocks
+ % echo online > /sys/devices/system/memory/auto_online_blocks
This sets a global policy and impacts all memory blocks that will subsequently
be hotplugged. Currently offline blocks keep their state. It is possible, under
@@ -277,24 +305,26 @@
If the automatic onlining wasn't requested, failed, or some memory block was
offlined it is possible to change the individual block's state by writing to the
-"state" file:
+"state" file::
-% echo online > /sys/devices/system/memory/memoryXXX/state
+ % echo online > /sys/devices/system/memory/memoryXXX/state
This onlining will not change the ZONE type of the target memory block,
If the memory block doesn't belong to any zone an appropriate kernel zone
(usually ZONE_NORMAL) will be used unless movable_node kernel command line
option is specified when ZONE_MOVABLE will be used.
-You can explicitly request to associate it with ZONE_MOVABLE by
+You can explicitly request to associate it with ZONE_MOVABLE by::
-% echo online_movable > /sys/devices/system/memory/memoryXXX/state
-(NOTE: current limit: this memory block must be adjacent to ZONE_MOVABLE)
+ % echo online_movable > /sys/devices/system/memory/memoryXXX/state
-Or you can explicitly request a kernel zone (usually ZONE_NORMAL) by:
+.. note:: current limit: this memory block must be adjacent to ZONE_MOVABLE
-% echo online_kernel > /sys/devices/system/memory/memoryXXX/state
-(NOTE: current limit: this memory block must be adjacent to ZONE_NORMAL)
+Or you can explicitly request a kernel zone (usually ZONE_NORMAL) by::
+
+ % echo online_kernel > /sys/devices/system/memory/memoryXXX/state
+
+.. note:: current limit: this memory block must be adjacent to ZONE_NORMAL
An explicit zone onlining can fail (e.g. when the range is already within
and existing and incompatible zone already).
@@ -306,12 +336,12 @@
-------------------------
-6. Logical memory remove
-------------------------
+Logical memory remove
+=====================
-6.1 Memory offline and ZONE_MOVABLE
-------------
+Memory offline and ZONE_MOVABLE
+-------------------------------
+
Memory offlining is more complicated than memory online. Because memory offline
has to make the whole memory block be unused, memory offline can fail if
the memory block includes memory which cannot be freed.
@@ -336,24 +366,27 @@
creates ZONE_MOVABLE as following.
1) When kernelcore=YYYY boot option is used,
- Size of memory not for movable pages (not for offline) is YYYY.
- Size of memory for movable pages (for offline) is TOTAL-YYYY.
+ Size of memory not for movable pages (not for offline) is YYYY.
+ Size of memory for movable pages (for offline) is TOTAL-YYYY.
2) When movablecore=ZZZZ boot option is used,
- Size of memory not for movable pages (not for offline) is TOTAL - ZZZZ.
- Size of memory for movable pages (for offline) is ZZZZ.
+ Size of memory not for movable pages (not for offline) is TOTAL - ZZZZ.
+ Size of memory for movable pages (for offline) is ZZZZ.
+.. note::
-Note: Unfortunately, there is no information to show which memory block belongs
-to ZONE_MOVABLE. This is TBD.
+ Unfortunately, there is no information to show which memory block belongs
+ to ZONE_MOVABLE. This is TBD.
+.. _memory_hotplug_how_to_offline_memory:
-6.2. How to offline memory
-------------
+How to offline memory
+---------------------
+
You can offline a memory block by using the same sysfs interface that was used
-in memory onlining.
+in memory onlining::
-% echo offline > /sys/devices/system/memory/memoryXXX/state
+ % echo offline > /sys/devices/system/memory/memoryXXX/state
If offline succeeds, the state of the memory block is changed to be "offline".
If it fails, some error core (like -EBUSY) will be returned by the kernel.
@@ -367,22 +400,22 @@
internal call and released soon.)
Consideration:
-Memory hotplug's design direction is to make the possibility of memory offlining
-higher and to guarantee unplugging memory under any situation. But it needs
-more work. Returning -EBUSY under some situation may be good because the user
-can decide to retry more or not by himself. Currently, memory offlining code
-does some amount of retry with 120 seconds timeout.
+ Memory hotplug's design direction is to make the possibility of memory
+ offlining higher and to guarantee unplugging memory under any situation. But
+ it needs more work. Returning -EBUSY under some situation may be good because
+ the user can decide to retry more or not by himself. Currently, memory
+ offlining code does some amount of retry with 120 seconds timeout.
--------------------------
-7. Physical memory remove
--------------------------
+Physical memory remove
+======================
+
Need more implementation yet....
- Notification completion of remove works by OS to firmware.
- Guard from remove if not yet.
---------------------------------
-8. Memory hotplug event notifier
---------------------------------
+Memory hotplug event notifier
+=============================
+
Hotplugging events are sent to a notification queue.
There are six types of notification defined in include/linux/memory.h:
@@ -412,14 +445,14 @@
MEM_OFFLINE
Generated after offlining memory is complete.
-A callback routine can be registered by calling
+A callback routine can be registered by calling::
hotplug_memory_notifier(callback_func, priority)
Callback functions with higher values of priority are called before callback
functions with lower values.
-A callback function must have the following prototype:
+A callback function must have the following prototype::
int callback_func(
struct notifier_block *self, unsigned long action, void *arg);
@@ -427,27 +460,28 @@
The first argument of the callback function (self) is a pointer to the block
of the notifier chain that points to the callback function itself.
The second argument (action) is one of the event types described above.
-The third argument (arg) passes a pointer of struct memory_notify.
+The third argument (arg) passes a pointer of struct memory_notify::
-struct memory_notify {
- unsigned long start_pfn;
- unsigned long nr_pages;
- int status_change_nid_normal;
- int status_change_nid_high;
- int status_change_nid;
-}
+ struct memory_notify {
+ unsigned long start_pfn;
+ unsigned long nr_pages;
+ int status_change_nid_normal;
+ int status_change_nid_high;
+ int status_change_nid;
+ }
-start_pfn is start_pfn of online/offline memory.
-nr_pages is # of pages of online/offline memory.
-status_change_nid_normal is set node id when N_NORMAL_MEMORY of nodemask
-is (will be) set/clear, if this is -1, then nodemask status is not changed.
-status_change_nid_high is set node id when N_HIGH_MEMORY of nodemask
-is (will be) set/clear, if this is -1, then nodemask status is not changed.
-status_change_nid is set node id when N_MEMORY of nodemask is (will be)
-set/clear. It means a new(memoryless) node gets new memory by online and a
-node loses all memory. If this is -1, then nodemask status is not changed.
-If status_changed_nid* >= 0, callback should create/discard structures for the
-node if necessary.
+- start_pfn is start_pfn of online/offline memory.
+- nr_pages is # of pages of online/offline memory.
+- status_change_nid_normal is set node id when N_NORMAL_MEMORY of nodemask
+ is (will be) set/clear, if this is -1, then nodemask status is not changed.
+- status_change_nid_high is set node id when N_HIGH_MEMORY of nodemask
+ is (will be) set/clear, if this is -1, then nodemask status is not changed.
+- status_change_nid is set node id when N_MEMORY of nodemask is (will be)
+ set/clear. It means a new(memoryless) node gets new memory by online and a
+ node loses all memory. If this is -1, then nodemask status is not changed.
+
+ If status_changed_nid* >= 0, callback should create/discard structures for the
+ node if necessary.
The callback routine shall return one of the values
NOTIFY_DONE, NOTIFY_OK, NOTIFY_BAD, NOTIFY_STOP
@@ -461,9 +495,9 @@
NOTIFY_STOP stops further processing of the notification queue.
---------------
-9. Future Work
---------------
+Future Work
+===========
+
- allowing memory hot-add to ZONE_MOVABLE. maybe we need some switch like
sysctl or new control file.
- showing memory block and physical device relationship.
@@ -471,4 +505,3 @@
- support HugeTLB page migration and offlining.
- memmap removing at memory offline.
- physical remove memory.
-
diff --git a/Documentation/men-chameleon-bus.txt b/Documentation/men-chameleon-bus.txt
index 30ded73..1b1f048 100644
--- a/Documentation/men-chameleon-bus.txt
+++ b/Documentation/men-chameleon-bus.txt
@@ -1,163 +1,175 @@
- MEN Chameleon Bus
- =================
-
-Table of Contents
=================
-1 Introduction
- 1.1 Scope of this Document
- 1.2 Limitations of the current implementation
-2 Architecture
- 2.1 MEN Chameleon Bus
- 2.2 Carrier Devices
- 2.3 Parser
-3 Resource handling
- 3.1 Memory Resources
- 3.2 IRQs
-4 Writing an MCB driver
- 4.1 The driver structure
- 4.2 Probing and attaching
- 4.3 Initializing the driver
+MEN Chameleon Bus
+=================
+
+.. Table of Contents
+ =================
+ 1 Introduction
+ 1.1 Scope of this Document
+ 1.2 Limitations of the current implementation
+ 2 Architecture
+ 2.1 MEN Chameleon Bus
+ 2.2 Carrier Devices
+ 2.3 Parser
+ 3 Resource handling
+ 3.1 Memory Resources
+ 3.2 IRQs
+ 4 Writing an MCB driver
+ 4.1 The driver structure
+ 4.2 Probing and attaching
+ 4.3 Initializing the driver
-1 Introduction
-===============
- This document describes the architecture and implementation of the MEN
- Chameleon Bus (called MCB throughout this document).
+Introduction
+============
-1.1 Scope of this Document
----------------------------
- This document is intended to be a short overview of the current
- implementation and does by no means describe the complete possibilities of MCB
- based devices.
+This document describes the architecture and implementation of the MEN
+Chameleon Bus (called MCB throughout this document).
-1.2 Limitations of the current implementation
-----------------------------------------------
- The current implementation is limited to PCI and PCIe based carrier devices
- that only use a single memory resource and share the PCI legacy IRQ. Not
- implemented are:
- - Multi-resource MCB devices like the VME Controller or M-Module carrier.
- - MCB devices that need another MCB device, like SRAM for a DMA Controller's
- buffer descriptors or a video controller's video memory.
- - A per-carrier IRQ domain for carrier devices that have one (or more) IRQs
- per MCB device like PCIe based carriers with MSI or MSI-X support.
-
-2 Architecture
-===============
- MCB is divided into 3 functional blocks:
- - The MEN Chameleon Bus itself,
- - drivers for MCB Carrier Devices and
- - the parser for the Chameleon table.
-
-2.1 MEN Chameleon Bus
+Scope of this Document
----------------------
- The MEN Chameleon Bus is an artificial bus system that attaches to a so
- called Chameleon FPGA device found on some hardware produced my MEN Mikro
- Elektronik GmbH. These devices are multi-function devices implemented in a
- single FPGA and usually attached via some sort of PCI or PCIe link. Each
- FPGA contains a header section describing the content of the FPGA. The
- header lists the device id, PCI BAR, offset from the beginning of the PCI
- BAR, size in the FPGA, interrupt number and some other properties currently
- not handled by the MCB implementation.
-2.2 Carrier Devices
+This document is intended to be a short overview of the current
+implementation and does by no means describe the complete possibilities of MCB
+based devices.
+
+Limitations of the current implementation
+-----------------------------------------
+
+The current implementation is limited to PCI and PCIe based carrier devices
+that only use a single memory resource and share the PCI legacy IRQ. Not
+implemented are:
+
+- Multi-resource MCB devices like the VME Controller or M-Module carrier.
+- MCB devices that need another MCB device, like SRAM for a DMA Controller's
+ buffer descriptors or a video controller's video memory.
+- A per-carrier IRQ domain for carrier devices that have one (or more) IRQs
+ per MCB device like PCIe based carriers with MSI or MSI-X support.
+
+Architecture
+============
+
+MCB is divided into 3 functional blocks:
+
+- The MEN Chameleon Bus itself,
+- drivers for MCB Carrier Devices and
+- the parser for the Chameleon table.
+
+MEN Chameleon Bus
+-----------------
+
+The MEN Chameleon Bus is an artificial bus system that attaches to a so
+called Chameleon FPGA device found on some hardware produced my MEN Mikro
+Elektronik GmbH. These devices are multi-function devices implemented in a
+single FPGA and usually attached via some sort of PCI or PCIe link. Each
+FPGA contains a header section describing the content of the FPGA. The
+header lists the device id, PCI BAR, offset from the beginning of the PCI
+BAR, size in the FPGA, interrupt number and some other properties currently
+not handled by the MCB implementation.
+
+Carrier Devices
+---------------
+
+A carrier device is just an abstraction for the real world physical bus the
+Chameleon FPGA is attached to. Some IP Core drivers may need to interact with
+properties of the carrier device (like querying the IRQ number of a PCI
+device). To provide abstraction from the real hardware bus, an MCB carrier
+device provides callback methods to translate the driver's MCB function calls
+to hardware related function calls. For example a carrier device may
+implement the get_irq() method which can be translated into a hardware bus
+query for the IRQ number the device should use.
+
+Parser
+------
+
+The parser reads the first 512 bytes of a Chameleon device and parses the
+Chameleon table. Currently the parser only supports the Chameleon v2 variant
+of the Chameleon table but can easily be adopted to support an older or
+possible future variant. While parsing the table's entries new MCB devices
+are allocated and their resources are assigned according to the resource
+assignment in the Chameleon table. After resource assignment is finished, the
+MCB devices are registered at the MCB and thus at the driver core of the
+Linux kernel.
+
+Resource handling
+=================
+
+The current implementation assigns exactly one memory and one IRQ resource
+per MCB device. But this is likely going to change in the future.
+
+Memory Resources
+----------------
+
+Each MCB device has exactly one memory resource, which can be requested from
+the MCB bus. This memory resource is the physical address of the MCB device
+inside the carrier and is intended to be passed to ioremap() and friends. It
+is already requested from the kernel by calling request_mem_region().
+
+IRQs
+----
+
+Each MCB device has exactly one IRQ resource, which can be requested from the
+MCB bus. If a carrier device driver implements the ->get_irq() callback
+method, the IRQ number assigned by the carrier device will be returned,
+otherwise the IRQ number inside the Chameleon table will be returned. This
+number is suitable to be passed to request_irq().
+
+Writing an MCB driver
+=====================
+
+The driver structure
--------------------
- A carrier device is just an abstraction for the real world physical bus the
- Chameleon FPGA is attached to. Some IP Core drivers may need to interact with
- properties of the carrier device (like querying the IRQ number of a PCI
- device). To provide abstraction from the real hardware bus, an MCB carrier
- device provides callback methods to translate the driver's MCB function calls
- to hardware related function calls. For example a carrier device may
- implement the get_irq() method which can be translated into a hardware bus
- query for the IRQ number the device should use.
-2.3 Parser
------------
- The parser reads the first 512 bytes of a Chameleon device and parses the
- Chameleon table. Currently the parser only supports the Chameleon v2 variant
- of the Chameleon table but can easily be adopted to support an older or
- possible future variant. While parsing the table's entries new MCB devices
- are allocated and their resources are assigned according to the resource
- assignment in the Chameleon table. After resource assignment is finished, the
- MCB devices are registered at the MCB and thus at the driver core of the
- Linux kernel.
+Each MCB driver has a structure to identify the device driver as well as
+device ids which identify the IP Core inside the FPGA. The driver structure
+also contains callback methods which get executed on driver probe and
+removal from the system::
-3 Resource handling
-====================
- The current implementation assigns exactly one memory and one IRQ resource
- per MCB device. But this is likely going to change in the future.
+ static const struct mcb_device_id foo_ids[] = {
+ { .device = 0x123 },
+ { }
+ };
+ MODULE_DEVICE_TABLE(mcb, foo_ids);
-3.1 Memory Resources
+ static struct mcb_driver foo_driver = {
+ driver = {
+ .name = "foo-bar",
+ .owner = THIS_MODULE,
+ },
+ .probe = foo_probe,
+ .remove = foo_remove,
+ .id_table = foo_ids,
+ };
+
+Probing and attaching
---------------------
- Each MCB device has exactly one memory resource, which can be requested from
- the MCB bus. This memory resource is the physical address of the MCB device
- inside the carrier and is intended to be passed to ioremap() and friends. It
- is already requested from the kernel by calling request_mem_region().
-3.2 IRQs
----------
- Each MCB device has exactly one IRQ resource, which can be requested from the
- MCB bus. If a carrier device driver implements the ->get_irq() callback
- method, the IRQ number assigned by the carrier device will be returned,
- otherwise the IRQ number inside the Chameleon table will be returned. This
- number is suitable to be passed to request_irq().
+When a driver is loaded and the MCB devices it services are found, the MCB
+core will call the driver's probe callback method. When the driver is removed
+from the system, the MCB core will call the driver's remove callback method::
-4 Writing an MCB driver
-=======================
+ static init foo_probe(struct mcb_device *mdev, const struct mcb_device_id *id);
+ static void foo_remove(struct mcb_device *mdev);
-4.1 The driver structure
--------------------------
- Each MCB driver has a structure to identify the device driver as well as
- device ids which identify the IP Core inside the FPGA. The driver structure
- also contains callback methods which get executed on driver probe and
- removal from the system.
+Initializing the driver
+-----------------------
+When the kernel is booted or your foo driver module is inserted, you have to
+perform driver initialization. Usually it is enough to register your driver
+module at the MCB core::
- static const struct mcb_device_id foo_ids[] = {
- { .device = 0x123 },
- { }
- };
- MODULE_DEVICE_TABLE(mcb, foo_ids);
+ static int __init foo_init(void)
+ {
+ return mcb_register_driver(&foo_driver);
+ }
+ module_init(foo_init);
- static struct mcb_driver foo_driver = {
- driver = {
- .name = "foo-bar",
- .owner = THIS_MODULE,
- },
- .probe = foo_probe,
- .remove = foo_remove,
- .id_table = foo_ids,
- };
+ static void __exit foo_exit(void)
+ {
+ mcb_unregister_driver(&foo_driver);
+ }
+ module_exit(foo_exit);
-4.2 Probing and attaching
---------------------------
- When a driver is loaded and the MCB devices it services are found, the MCB
- core will call the driver's probe callback method. When the driver is removed
- from the system, the MCB core will call the driver's remove callback method.
+The module_mcb_driver() macro can be used to reduce the above code::
-
- static init foo_probe(struct mcb_device *mdev, const struct mcb_device_id *id);
- static void foo_remove(struct mcb_device *mdev);
-
-4.3 Initializing the driver
-----------------------------
- When the kernel is booted or your foo driver module is inserted, you have to
- perform driver initialization. Usually it is enough to register your driver
- module at the MCB core.
-
-
- static int __init foo_init(void)
- {
- return mcb_register_driver(&foo_driver);
- }
- module_init(foo_init);
-
- static void __exit foo_exit(void)
- {
- mcb_unregister_driver(&foo_driver);
- }
- module_exit(foo_exit);
-
- The module_mcb_driver() macro can be used to reduce the above code.
-
-
- module_mcb_driver(foo_driver);
+ module_mcb_driver(foo_driver);
diff --git a/Documentation/networking/timestamping.txt b/Documentation/networking/timestamping.txt
index 196ba17..1be0b6f 100644
--- a/Documentation/networking/timestamping.txt
+++ b/Documentation/networking/timestamping.txt
@@ -44,8 +44,7 @@
Supports multiple types of timestamp requests. As a result, this
socket option takes a bitmap of flags, not a boolean. In
- err = setsockopt(fd, SOL_SOCKET, SO_TIMESTAMPING, (void *) val,
- sizeof(val));
+ err = setsockopt(fd, SOL_SOCKET, SO_TIMESTAMPING, &val, sizeof(val));
val is an integer with any of the following bits set. Setting other
bit returns EINVAL and does not change the current state.
@@ -249,8 +248,7 @@
__u32 val = SOF_TIMESTAMPING_SOFTWARE |
SOF_TIMESTAMPING_OPT_ID /* or any other flag */;
- err = setsockopt(fd, SOL_SOCKET, SO_TIMESTAMPING, (void *) val,
- sizeof(val));
+ err = setsockopt(fd, SOL_SOCKET, SO_TIMESTAMPING, &val, sizeof(val));
1.4 Bytestream Timestamps
diff --git a/Documentation/nommu-mmap.txt b/Documentation/nommu-mmap.txt
index ae57b9e..69556f0 100644
--- a/Documentation/nommu-mmap.txt
+++ b/Documentation/nommu-mmap.txt
@@ -1,6 +1,6 @@
- =============================
- NO-MMU MEMORY MAPPING SUPPORT
- =============================
+=============================
+No-MMU memory mapping support
+=============================
The kernel has limited support for memory mapping under no-MMU conditions, such
as are used in uClinux environments. From the userspace point of view, memory
@@ -16,7 +16,7 @@
The behaviour is similar between the MMU and no-MMU cases, but not identical;
and it's also much more restricted in the latter case:
- (*) Anonymous mapping, MAP_PRIVATE
+ (#) Anonymous mapping, MAP_PRIVATE
In the MMU case: VM regions backed by arbitrary pages; copy-on-write
across fork.
@@ -24,14 +24,14 @@
In the no-MMU case: VM regions backed by arbitrary contiguous runs of
pages.
- (*) Anonymous mapping, MAP_SHARED
+ (#) Anonymous mapping, MAP_SHARED
These behave very much like private mappings, except that they're
shared across fork() or clone() without CLONE_VM in the MMU case. Since
the no-MMU case doesn't support these, behaviour is identical to
MAP_PRIVATE there.
- (*) File, MAP_PRIVATE, PROT_READ / PROT_EXEC, !PROT_WRITE
+ (#) File, MAP_PRIVATE, PROT_READ / PROT_EXEC, !PROT_WRITE
In the MMU case: VM regions backed by pages read from file; changes to
the underlying file are reflected in the mapping; copied across fork.
@@ -56,7 +56,7 @@
are visible in other processes (no MMU protection), but should not
happen.
- (*) File, MAP_PRIVATE, PROT_READ / PROT_EXEC, PROT_WRITE
+ (#) File, MAP_PRIVATE, PROT_READ / PROT_EXEC, PROT_WRITE
In the MMU case: like the non-PROT_WRITE case, except that the pages in
question get copied before the write actually happens. From that point
@@ -66,7 +66,7 @@
In the no-MMU case: works much like the non-PROT_WRITE case, except
that a copy is always taken and never shared.
- (*) Regular file / blockdev, MAP_SHARED, PROT_READ / PROT_EXEC / PROT_WRITE
+ (#) Regular file / blockdev, MAP_SHARED, PROT_READ / PROT_EXEC / PROT_WRITE
In the MMU case: VM regions backed by pages read from file; changes to
pages written back to file; writes to file reflected into pages backing
@@ -74,7 +74,7 @@
In the no-MMU case: not supported.
- (*) Memory backed regular file, MAP_SHARED, PROT_READ / PROT_EXEC / PROT_WRITE
+ (#) Memory backed regular file, MAP_SHARED, PROT_READ / PROT_EXEC / PROT_WRITE
In the MMU case: As for ordinary regular files.
@@ -85,7 +85,7 @@
as for the MMU case. If the filesystem does not provide any such
support, then the mapping request will be denied.
- (*) Memory backed blockdev, MAP_SHARED, PROT_READ / PROT_EXEC / PROT_WRITE
+ (#) Memory backed blockdev, MAP_SHARED, PROT_READ / PROT_EXEC / PROT_WRITE
In the MMU case: As for ordinary regular files.
@@ -94,7 +94,7 @@
truncate being called. The ramdisk driver could do this if it allocated
all its memory as a contiguous array upfront.
- (*) Memory backed chardev, MAP_SHARED, PROT_READ / PROT_EXEC / PROT_WRITE
+ (#) Memory backed chardev, MAP_SHARED, PROT_READ / PROT_EXEC / PROT_WRITE
In the MMU case: As for ordinary regular files.
@@ -105,21 +105,20 @@
provide any such support, then the mapping request will be denied.
-============================
-FURTHER NOTES ON NO-MMU MMAP
+Further notes on no-MMU MMAP
============================
- (*) A request for a private mapping of a file may return a buffer that is not
+ (#) A request for a private mapping of a file may return a buffer that is not
page-aligned. This is because XIP may take place, and the data may not be
paged aligned in the backing store.
- (*) A request for an anonymous mapping will always be page aligned. If
+ (#) A request for an anonymous mapping will always be page aligned. If
possible the size of the request should be a power of two otherwise some
of the space may be wasted as the kernel must allocate a power-of-2
granule but will only discard the excess if appropriately configured as
this has an effect on fragmentation.
- (*) The memory allocated by a request for an anonymous mapping will normally
+ (#) The memory allocated by a request for an anonymous mapping will normally
be cleared by the kernel before being returned in accordance with the
Linux man pages (ver 2.22 or later).
@@ -145,24 +144,23 @@
uClibc uses this to speed up malloc(), and the ELF-FDPIC binfmt uses this
to allocate the brk and stack region.
- (*) A list of all the private copy and anonymous mappings on the system is
+ (#) A list of all the private copy and anonymous mappings on the system is
visible through /proc/maps in no-MMU mode.
- (*) A list of all the mappings in use by a process is visible through
+ (#) A list of all the mappings in use by a process is visible through
/proc/<pid>/maps in no-MMU mode.
- (*) Supplying MAP_FIXED or a requesting a particular mapping address will
+ (#) Supplying MAP_FIXED or a requesting a particular mapping address will
result in an error.
- (*) Files mapped privately usually have to have a read method provided by the
+ (#) Files mapped privately usually have to have a read method provided by the
driver or filesystem so that the contents can be read into the memory
allocated if mmap() chooses not to map the backing device directly. An
error will result if they don't. This is most likely to be encountered
with character device files, pipes, fifos and sockets.
-==========================
-INTERPROCESS SHARED MEMORY
+Interprocess shared memory
==========================
Both SYSV IPC SHM shared memory and POSIX shared memory is supported in NOMMU
@@ -170,8 +168,7 @@
on ramfs or tmpfs mounts.
-=======
-FUTEXES
+Futexes
=======
Futexes are supported in NOMMU mode if the arch supports them. An error will
@@ -180,12 +177,11 @@
support futexes (such as an I/O chardev mapping).
-=============
-NO-MMU MREMAP
+No-MMU mremap
=============
The mremap() function is partially supported. It may change the size of a
-mapping, and may move it[*] if MREMAP_MAYMOVE is specified and if the new size
+mapping, and may move it [#]_ if MREMAP_MAYMOVE is specified and if the new size
of the mapping exceeds the size of the slab object currently occupied by the
memory to which the mapping refers, or if a smaller slab object could be used.
@@ -200,11 +196,10 @@
mappings, move parts of existing mappings or resize parts of mappings. It must
act on a complete mapping.
-[*] Not currently supported.
+.. [#] Not currently supported.
-============================================
-PROVIDING SHAREABLE CHARACTER DEVICE SUPPORT
+Providing shareable character device support
============================================
To provide shareable character device support, a driver must provide a
@@ -235,7 +230,7 @@
mapping request will be rejected if NOMMU_MAP_COPY is not specified, and a
copy mapped otherwise.
-IMPORTANT NOTE:
+.. important::
Some types of device may present a different appearance to anyone
looking at them in certain modes. Flash chips can be like this; for
@@ -249,8 +244,7 @@
circumstances!
-==============================================
-PROVIDING SHAREABLE MEMORY-BACKED FILE SUPPORT
+Providing shareable memory-backed file support
==============================================
Provision of shared mappings on memory backed files is similar to the provision
@@ -267,8 +261,7 @@
the memory_backed flag set.
-========================================
-PROVIDING SHAREABLE BLOCK DEVICE SUPPORT
+Providing shareable block device support
========================================
Provision of shared mappings on block device files is exactly the same as for
@@ -276,8 +269,7 @@
should allocate sufficient contiguous memory to honour any supported mapping.
-=================================
-ADJUSTING PAGE TRIMMING BEHAVIOUR
+Adjusting page trimming behaviour
=================================
NOMMU mmap automatically rounds up to the nearest power-of-2 number of pages
@@ -288,4 +280,4 @@
behaviour can either be disabled completely, or bumped up to a higher page
watermark where trimming begins.
-Page trimming behaviour is configurable via the sysctl `vm.nr_trim_pages'.
+Page trimming behaviour is configurable via the sysctl ``vm.nr_trim_pages``.
diff --git a/Documentation/ntb.txt b/Documentation/ntb.txt
index 1d9bbab..a043854 100644
--- a/Documentation/ntb.txt
+++ b/Documentation/ntb.txt
@@ -1,16 +1,21 @@
-# NTB Drivers
+===========
+NTB Drivers
+===========
NTB (Non-Transparent Bridge) is a type of PCI-Express bridge chip that connects
-the separate memory systems of two computers to the same PCI-Express fabric.
-Existing NTB hardware supports a common feature set, including scratchpad
-registers, doorbell registers, and memory translation windows. Scratchpad
-registers are read-and-writable registers that are accessible from either side
-of the device, so that peers can exchange a small amount of information at a
-fixed address. Doorbell registers provide a way for peers to send interrupt
-events. Memory windows allow translated read and write access to the peer
-memory.
+the separate memory systems of two or more computers to the same PCI-Express
+fabric. Existing NTB hardware supports a common feature set: doorbell
+registers and memory translation windows, as well as non common features like
+scratchpad and message registers. Scratchpad registers are read-and-writable
+registers that are accessible from either side of the device, so that peers can
+exchange a small amount of information at a fixed address. Message registers can
+be utilized for the same purpose. Additionally they are provided with with
+special status bits to make sure the information isn't rewritten by another
+peer. Doorbell registers provide a way for peers to send interrupt events.
+Memory windows allow translated read and write access to the peer memory.
-## NTB Core Driver (ntb)
+NTB Core Driver (ntb)
+=====================
The NTB core driver defines an api wrapping the common feature set, and allows
clients interested in NTB features to discover NTB the devices supported by
@@ -18,7 +23,8 @@
component making use of the NTB api. The term "driver," or "hardware driver,"
is used here to mean a driver for a specific vendor and model of NTB hardware.
-## NTB Client Drivers
+NTB Client Drivers
+==================
NTB client drivers should register with the NTB core driver. After
registering, the client probe and remove functions will be called appropriately
@@ -26,7 +32,90 @@
registration uses the Linux Device framework, so it should feel familiar to
anyone who has written a pci driver.
-### NTB Transport Client (ntb\_transport) and NTB Netdev (ntb\_netdev)
+NTB Typical client driver implementation
+----------------------------------------
+
+Primary purpose of NTB is to share some peace of memory between at least two
+systems. So the NTB device features like Scratchpad/Message registers are
+mainly used to perform the proper memory window initialization. Typically
+there are two types of memory window interfaces supported by the NTB API:
+inbound translation configured on the local ntb port and outbound translation
+configured by the peer, on the peer ntb port. The first type is
+depicted on the next figure
+
+Inbound translation:
+ Memory: Local NTB Port: Peer NTB Port: Peer MMIO:
+ ____________
+ | dma-mapped |-ntb_mw_set_trans(addr) |
+ | memory | _v____________ | ______________
+ | (addr) |<======| MW xlat addr |<====| MW base addr |<== memory-mapped IO
+ |------------| |--------------| | |--------------|
+
+So typical scenario of the first type memory window initialization looks:
+1) allocate a memory region, 2) put translated address to NTB config,
+3) somehow notify a peer device of performed initialization, 4) peer device
+maps corresponding outbound memory window so to have access to the shared
+memory region.
+
+The second type of interface, that implies the shared windows being
+initialized by a peer device, is depicted on the figure:
+
+Outbound translation:
+ Memory: Local NTB Port: Peer NTB Port: Peer MMIO:
+ ____________ ______________
+ | dma-mapped | | | MW base addr |<== memory-mapped IO
+ | memory | | |--------------|
+ | (addr) |<===================| MW xlat addr |<-ntb_peer_mw_set_trans(addr)
+ |------------| | |--------------|
+
+Typical scenario of the second type interface initialization would be:
+1) allocate a memory region, 2) somehow deliver a translated address to a peer
+device, 3) peer puts the translated address to NTB config, 4) peer device maps
+outbound memory window so to have access to the shared memory region.
+
+As one can see the described scenarios can be combined in one portable
+algorithm.
+ Local device:
+ 1) Allocate memory for a shared window
+ 2) Initialize memory window by translated address of the allocated region
+ (it may fail if local memory window initialization is unsupported)
+ 3) Send the translated address and memory window index to a peer device
+ Peer device:
+ 1) Initialize memory window with retrieved address of the allocated
+ by another device memory region (it may fail if peer memory window
+ initialization is unsupported)
+ 2) Map outbound memory window
+
+In accordance with this scenario, the NTB Memory Window API can be used as
+follows:
+ Local device:
+ 1) ntb_mw_count(pidx) - retrieve number of memory ranges, which can
+ be allocated for memory windows between local device and peer device
+ of port with specified index.
+ 2) ntb_get_align(pidx, midx) - retrieve parameters restricting the
+ shared memory region alignment and size. Then memory can be properly
+ allocated.
+ 3) Allocate physically contiguous memory region in compliance with
+ restrictions retrieved in 2).
+ 4) ntb_mw_set_trans(pidx, midx) - try to set translation address of
+ the memory window with specified index for the defined peer device
+ (it may fail if local translated address setting is not supported)
+ 5) Send translated base address (usually together with memory window
+ number) to the peer device using, for instance, scratchpad or message
+ registers.
+ Peer device:
+ 1) ntb_peer_mw_set_trans(pidx, midx) - try to set received from other
+ device (related to pidx) translated address for specified memory
+ window. It may fail if retrieved address, for instance, exceeds
+ maximum possible address or isn't properly aligned.
+ 2) ntb_peer_mw_get_addr(widx) - retrieve MMIO address to map the memory
+ window so to have an access to the shared memory.
+
+Also it is worth to note, that method ntb_mw_count(pidx) should return the
+same value as ntb_peer_mw_count() on the peer with port index - pidx.
+
+NTB Transport Client (ntb\_transport) and NTB Netdev (ntb\_netdev)
+------------------------------------------------------------------
The primary client for NTB is the Transport client, used in tandem with NTB
Netdev. These drivers function together to create a logical link to the peer,
@@ -37,7 +126,8 @@
Transport queue pair buffer. The Transport client may be used for other things
besides Netdev, however no other applications have yet been written.
-### NTB Ping Pong Test Client (ntb\_pingpong)
+NTB Ping Pong Test Client (ntb\_pingpong)
+-----------------------------------------
The Ping Pong test client serves as a demonstration to exercise the doorbell
and scratchpad registers of NTB hardware, and as an example simple NTB client.
@@ -64,7 +154,8 @@
* dyndbg - It is suggested to specify dyndbg=+p when loading this module, and
then to observe debugging output on the console.
-### NTB Tool Test Client (ntb\_tool)
+NTB Tool Test Client (ntb\_tool)
+--------------------------------
The Tool test client serves for debugging, primarily, ntb hardware and drivers.
The Tool provides access through debugfs for reading, setting, and clearing the
@@ -74,48 +165,60 @@
Debugfs Files:
-* *debugfs*/ntb\_tool/*hw*/ - A directory in debugfs will be created for each
+* *debugfs*/ntb\_tool/*hw*/
+ A directory in debugfs will be created for each
NTB device probed by the tool. This directory is shortened to *hw*
below.
-* *hw*/db - This file is used to read, set, and clear the local doorbell. Not
+* *hw*/db
+ This file is used to read, set, and clear the local doorbell. Not
all operations may be supported by all hardware. To read the doorbell,
read the file. To set the doorbell, write `s` followed by the bits to
set (eg: `echo 's 0x0101' > db`). To clear the doorbell, write `c`
followed by the bits to clear.
-* *hw*/mask - This file is used to read, set, and clear the local doorbell mask.
+* *hw*/mask
+ This file is used to read, set, and clear the local doorbell mask.
See *db* for details.
-* *hw*/peer\_db - This file is used to read, set, and clear the peer doorbell.
+* *hw*/peer\_db
+ This file is used to read, set, and clear the peer doorbell.
See *db* for details.
-* *hw*/peer\_mask - This file is used to read, set, and clear the peer doorbell
+* *hw*/peer\_mask
+ This file is used to read, set, and clear the peer doorbell
mask. See *db* for details.
-* *hw*/spad - This file is used to read and write local scratchpads. To read
+* *hw*/spad
+ This file is used to read and write local scratchpads. To read
the values of all scratchpads, read the file. To write values, write a
series of pairs of scratchpad number and value
(eg: `echo '4 0x123 7 0xabc' > spad`
# to set scratchpads `4` and `7` to `0x123` and `0xabc`, respectively).
-* *hw*/peer\_spad - This file is used to read and write peer scratchpads. See
+* *hw*/peer\_spad
+ This file is used to read and write peer scratchpads. See
*spad* for details.
-## NTB Hardware Drivers
+NTB Hardware Drivers
+====================
NTB hardware drivers should register devices with the NTB core driver. After
registering, clients probe and remove functions will be called.
-### NTB Intel Hardware Driver (ntb\_hw\_intel)
+NTB Intel Hardware Driver (ntb\_hw\_intel)
+------------------------------------------
The Intel hardware driver supports NTB on Xeon and Atom CPUs.
Module Parameters:
-* b2b\_mw\_idx - If the peer ntb is to be accessed via a memory window, then use
+* b2b\_mw\_idx
+ If the peer ntb is to be accessed via a memory window, then use
this memory window to access the peer ntb. A value of zero or positive
starts from the first mw idx, and a negative value starts from the last
mw idx. Both sides MUST set the same value here! The default value is
`-1`.
-* b2b\_mw\_share - If the peer ntb is to be accessed via a memory window, and if
+* b2b\_mw\_share
+ If the peer ntb is to be accessed via a memory window, and if
the memory window is large enough, still allow the client to use the
second half of the memory window for address translation to the peer.
-* xeon\_b2b\_usd\_bar2\_addr64 - If using B2B topology on Xeon hardware, use
+* xeon\_b2b\_usd\_bar2\_addr64
+ If using B2B topology on Xeon hardware, use
this 64 bit address on the bus between the NTB devices for the window
at BAR2, on the upstream side of the link.
* xeon\_b2b\_usd\_bar4\_addr64 - See *xeon\_b2b\_bar2\_addr64*.
diff --git a/Documentation/numastat.txt b/Documentation/numastat.txt
index 5203277..aaf1667 100644
--- a/Documentation/numastat.txt
+++ b/Documentation/numastat.txt
@@ -1,10 +1,12 @@
-
+===============================
Numa policy hit/miss statistics
+===============================
/sys/devices/system/node/node*/numastat
All units are pages. Hugepages have separate counters.
+=============== ============================================================
numa_hit A process wanted to allocate memory from this node,
and succeeded.
@@ -20,6 +22,7 @@
interleave_hit Interleaving wanted to allocate from this node
and succeeded.
+=============== ============================================================
For easier reading you can use the numastat utility from the numactl package
(http://oss.sgi.com/projects/libnuma/). Note that it only works
diff --git a/Documentation/padata.txt b/Documentation/padata.txt
index 7ddfe21..b103d0c 100644
--- a/Documentation/padata.txt
+++ b/Documentation/padata.txt
@@ -1,5 +1,8 @@
+=======================================
The padata parallel execution mechanism
-Last updated for 2.6.36
+=======================================
+
+:Last updated: for 2.6.36
Padata is a mechanism by which the kernel can farm work out to be done in
parallel on multiple CPUs while retaining the ordering of tasks. It was
@@ -9,7 +12,7 @@
sufficiently general fashion that it could be put to other uses as well.
The first step in using padata is to set up a padata_instance structure for
-overall control of how tasks are to be run:
+overall control of how tasks are to be run::
#include <linux/padata.h>
@@ -24,7 +27,7 @@
a multithreaded queue, naturally.
To allocate a padata instance with the cpu_possible_mask for both
-cpumasks this helper function can be used:
+cpumasks this helper function can be used::
struct padata_instance *padata_alloc_possible(struct workqueue_struct *wq);
@@ -36,7 +39,7 @@
Once an offline CPU in the user supplied cpumask comes online, padata
is going to use it.
-There are functions for enabling and disabling the instance:
+There are functions for enabling and disabling the instance::
int padata_start(struct padata_instance *pinst);
void padata_stop(struct padata_instance *pinst);
@@ -48,7 +51,7 @@
padata_stop clears the flag and blocks until the padata instance
is unused.
-The list of CPUs to be used can be adjusted with these functions:
+The list of CPUs to be used can be adjusted with these functions::
int padata_set_cpumasks(struct padata_instance *pinst,
cpumask_var_t pcpumask,
@@ -71,12 +74,12 @@
remove and mask is one of PADATA_CPU_SERIAL, PADATA_CPU_PARALLEL.
If a user is interested in padata cpumask changes, he can register to
-the padata cpumask change notifier:
+the padata cpumask change notifier::
int padata_register_cpumask_notifier(struct padata_instance *pinst,
struct notifier_block *nblock);
-To unregister from that notifier:
+To unregister from that notifier::
int padata_unregister_cpumask_notifier(struct padata_instance *pinst,
struct notifier_block *nblock);
@@ -84,7 +87,7 @@
The padata cpumask change notifier notifies about changes of the usable
cpumasks, i.e. the subset of active CPUs in the user supplied cpumask.
-Padata calls the notifier chain with:
+Padata calls the notifier chain with::
blocking_notifier_call_chain(&pinst->cpumask_change_notifier,
notification_mask,
@@ -95,7 +98,7 @@
to a struct padata_cpumask that contains the new cpumask information.
Actually submitting work to the padata instance requires the creation of a
-padata_priv structure:
+padata_priv structure::
struct padata_priv {
/* Other stuff here... */
@@ -110,7 +113,7 @@
be called in the process of getting the work done as we will see
momentarily.
-The submission of work is done with:
+The submission of work is done with::
int padata_do_parallel(struct padata_instance *pinst,
struct padata_priv *padata, int cb_cpu);
@@ -138,7 +141,7 @@
outstanding, it should be prepared to be called again with a new job before
the previous one completes. When a task does complete, parallel() (or
whatever function actually finishes the job) should inform padata of the
-fact with a call to:
+fact with a call to::
void padata_do_serial(struct padata_priv *padata);
@@ -151,7 +154,7 @@
submitted.
The one remaining function in the padata API should be called to clean up
-when a padata instance is no longer needed:
+when a padata instance is no longer needed::
void padata_free(struct padata_instance *pinst);
diff --git a/Documentation/parport-lowlevel.txt b/Documentation/parport-lowlevel.txt
index 120eb20..0633d70 100644
--- a/Documentation/parport-lowlevel.txt
+++ b/Documentation/parport-lowlevel.txt
@@ -1,11 +1,12 @@
+===============================
PARPORT interface documentation
--------------------------------
+===============================
-Time-stamp: <2000-02-24 13:30:20 twaugh>
+:Time-stamp: <2000-02-24 13:30:20 twaugh>
Described here are the following functions:
-Global functions:
+Global functions::
parport_register_driver
parport_unregister_driver
parport_enumerate
@@ -31,7 +32,8 @@
parport_set_timeout
Port functions (can be overridden by low-level drivers):
- SPP:
+
+ SPP::
port->ops->read_data
port->ops->write_data
port->ops->read_status
@@ -43,23 +45,23 @@
port->ops->data_forward
port->ops->data_reverse
- EPP:
+ EPP::
port->ops->epp_write_data
port->ops->epp_read_data
port->ops->epp_write_addr
port->ops->epp_read_addr
- ECP:
+ ECP::
port->ops->ecp_write_data
port->ops->ecp_read_data
port->ops->ecp_write_addr
- Other:
+ Other::
port->ops->nibble_read_data
port->ops->byte_read_data
port->ops->compat_write_data
-The parport subsystem comprises 'parport' (the core port-sharing
+The parport subsystem comprises ``parport`` (the core port-sharing
code), and a variety of low-level drivers that actually do the port
accesses. Each low-level driver handles a particular style of port
(PC, Amiga, and so on).
@@ -70,14 +72,14 @@
The global functions are mostly for communicating between the device
driver and the parport subsystem: acquiring a list of available ports,
claiming a port for exclusive use, and so on. They also include
-'generic' functions for doing standard things that will work on any
+``generic`` functions for doing standard things that will work on any
IEEE 1284-capable architecture.
The port functions are provided by the low-level drivers, although the
-core parport module provides generic 'defaults' for some routines.
+core parport module provides generic ``defaults`` for some routines.
The port functions can be split into three groups: SPP, EPP, and ECP.
-SPP (Standard Parallel Port) functions modify so-called 'SPP'
+SPP (Standard Parallel Port) functions modify so-called ``SPP``
registers: data, status, and control. The hardware may not actually
have registers exactly like that, but the PC does and this interface is
modelled after common PC implementations. Other low-level drivers may
@@ -95,58 +97,63 @@
low-level driver specific function is provided, for altering 'fudge
factors'.
-GLOBAL FUNCTIONS
-----------------
+Global functions
+================
parport_register_driver - register a device driver with parport
------------------------
+---------------------------------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-struct parport_driver {
- const char *name;
- void (*attach) (struct parport *);
- void (*detach) (struct parport *);
- struct parport_driver *next;
-};
-int parport_register_driver (struct parport_driver *driver);
+ #include <linux/parport.h>
+
+ struct parport_driver {
+ const char *name;
+ void (*attach) (struct parport *);
+ void (*detach) (struct parport *);
+ struct parport_driver *next;
+ };
+ int parport_register_driver (struct parport_driver *driver);
DESCRIPTION
+^^^^^^^^^^^
In order to be notified about parallel ports when they are detected,
parport_register_driver should be called. Your driver will
immediately be notified of all ports that have already been detected,
and of each new port as low-level drivers are loaded.
-A 'struct parport_driver' contains the textual name of your driver,
+A ``struct parport_driver`` contains the textual name of your driver,
a pointer to a function to handle new ports, and a pointer to a
function to handle ports going away due to a low-level driver
unloading. Ports will only be detached if they are not being used
(i.e. there are no devices registered on them).
-The visible parts of the 'struct parport *' argument given to
-attach/detach are:
+The visible parts of the ``struct parport *`` argument given to
+attach/detach are::
-struct parport
-{
- struct parport *next; /* next parport in list */
- const char *name; /* port's name */
- unsigned int modes; /* bitfield of hardware modes */
- struct parport_device_info probe_info;
- /* IEEE1284 info */
- int number; /* parport index */
- struct parport_operations *ops;
- ...
-};
+ struct parport
+ {
+ struct parport *next; /* next parport in list */
+ const char *name; /* port's name */
+ unsigned int modes; /* bitfield of hardware modes */
+ struct parport_device_info probe_info;
+ /* IEEE1284 info */
+ int number; /* parport index */
+ struct parport_operations *ops;
+ ...
+ };
There are other members of the structure, but they should not be
touched.
-The 'modes' member summarises the capabilities of the underlying
+The ``modes`` member summarises the capabilities of the underlying
hardware. It consists of flags which may be bitwise-ored together:
+ ============================= ===============================================
PARPORT_MODE_PCSPP IBM PC registers are available,
i.e. functions that act on data,
control and status registers are
@@ -169,297 +176,351 @@
GFP_DMA flag with kmalloc) to the
low-level driver in order to take
advantage of it.
+ ============================= ===============================================
-There may be other flags in 'modes' as well.
+There may be other flags in ``modes`` as well.
-The contents of 'modes' is advisory only. For example, if the
-hardware is capable of DMA, and PARPORT_MODE_DMA is in 'modes', it
+The contents of ``modes`` is advisory only. For example, if the
+hardware is capable of DMA, and PARPORT_MODE_DMA is in ``modes``, it
doesn't necessarily mean that DMA will always be used when possible.
Similarly, hardware that is capable of assisting ECP transfers won't
necessarily be used.
RETURN VALUE
+^^^^^^^^^^^^
Zero on success, otherwise an error code.
ERRORS
+^^^^^^
None. (Can it fail? Why return int?)
EXAMPLE
+^^^^^^^
-static void lp_attach (struct parport *port)
-{
- ...
- private = kmalloc (...);
- dev[count++] = parport_register_device (...);
- ...
-}
+::
-static void lp_detach (struct parport *port)
-{
- ...
-}
-
-static struct parport_driver lp_driver = {
- "lp",
- lp_attach,
- lp_detach,
- NULL /* always put NULL here */
-};
-
-int lp_init (void)
-{
- ...
- if (parport_register_driver (&lp_driver)) {
- /* Failed; nothing we can do. */
- return -EIO;
+ static void lp_attach (struct parport *port)
+ {
+ ...
+ private = kmalloc (...);
+ dev[count++] = parport_register_device (...);
+ ...
}
- ...
-}
+
+ static void lp_detach (struct parport *port)
+ {
+ ...
+ }
+
+ static struct parport_driver lp_driver = {
+ "lp",
+ lp_attach,
+ lp_detach,
+ NULL /* always put NULL here */
+ };
+
+ int lp_init (void)
+ {
+ ...
+ if (parport_register_driver (&lp_driver)) {
+ /* Failed; nothing we can do. */
+ return -EIO;
+ }
+ ...
+ }
+
SEE ALSO
+^^^^^^^^
parport_unregister_driver, parport_register_device, parport_enumerate
-
+
+
+
parport_unregister_driver - tell parport to forget about this driver
--------------------------
+--------------------------------------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-struct parport_driver {
- const char *name;
- void (*attach) (struct parport *);
- void (*detach) (struct parport *);
- struct parport_driver *next;
-};
-void parport_unregister_driver (struct parport_driver *driver);
+ #include <linux/parport.h>
+
+ struct parport_driver {
+ const char *name;
+ void (*attach) (struct parport *);
+ void (*detach) (struct parport *);
+ struct parport_driver *next;
+ };
+ void parport_unregister_driver (struct parport_driver *driver);
DESCRIPTION
+^^^^^^^^^^^
This tells parport not to notify the device driver of new ports or of
ports going away. Registered devices belonging to that driver are NOT
unregistered: parport_unregister_device must be used for each one.
EXAMPLE
+^^^^^^^
-void cleanup_module (void)
-{
- ...
- /* Stop notifications. */
- parport_unregister_driver (&lp_driver);
+::
- /* Unregister devices. */
- for (i = 0; i < NUM_DEVS; i++)
- parport_unregister_device (dev[i]);
- ...
-}
+ void cleanup_module (void)
+ {
+ ...
+ /* Stop notifications. */
+ parport_unregister_driver (&lp_driver);
+
+ /* Unregister devices. */
+ for (i = 0; i < NUM_DEVS; i++)
+ parport_unregister_device (dev[i]);
+ ...
+ }
SEE ALSO
+^^^^^^^^
parport_register_driver, parport_enumerate
-
+
+
+
parport_enumerate - retrieve a list of parallel ports (DEPRECATED)
------------------
+------------------------------------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-struct parport *parport_enumerate (void);
+ #include <linux/parport.h>
+
+ struct parport *parport_enumerate (void);
DESCRIPTION
+^^^^^^^^^^^
Retrieve the first of a list of valid parallel ports for this machine.
-Successive parallel ports can be found using the 'struct parport
-*next' element of the 'struct parport *' that is returned. If 'next'
+Successive parallel ports can be found using the ``struct parport
+*next`` element of the ``struct parport *`` that is returned. If ``next``
is NULL, there are no more parallel ports in the list. The number of
ports in the list will not exceed PARPORT_MAX.
RETURN VALUE
+^^^^^^^^^^^^
-A 'struct parport *' describing a valid parallel port for the machine,
+A ``struct parport *`` describing a valid parallel port for the machine,
or NULL if there are none.
ERRORS
+^^^^^^
This function can return NULL to indicate that there are no parallel
ports to use.
EXAMPLE
+^^^^^^^
-int detect_device (void)
-{
- struct parport *port;
+::
- for (port = parport_enumerate ();
- port != NULL;
- port = port->next) {
- /* Try to detect a device on the port... */
+ int detect_device (void)
+ {
+ struct parport *port;
+
+ for (port = parport_enumerate ();
+ port != NULL;
+ port = port->next) {
+ /* Try to detect a device on the port... */
+ ...
+ }
+ }
+
...
- }
}
- ...
-}
-
NOTES
+^^^^^
parport_enumerate is deprecated; parport_register_driver should be
used instead.
SEE ALSO
+^^^^^^^^
parport_register_driver, parport_unregister_driver
-
+
+
+
parport_register_device - register to use a port
------------------------
+------------------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-typedef int (*preempt_func) (void *handle);
-typedef void (*wakeup_func) (void *handle);
-typedef int (*irq_func) (int irq, void *handle, struct pt_regs *);
+ #include <linux/parport.h>
-struct pardevice *parport_register_device(struct parport *port,
- const char *name,
- preempt_func preempt,
- wakeup_func wakeup,
- irq_func irq,
- int flags,
- void *handle);
+ typedef int (*preempt_func) (void *handle);
+ typedef void (*wakeup_func) (void *handle);
+ typedef int (*irq_func) (int irq, void *handle, struct pt_regs *);
+
+ struct pardevice *parport_register_device(struct parport *port,
+ const char *name,
+ preempt_func preempt,
+ wakeup_func wakeup,
+ irq_func irq,
+ int flags,
+ void *handle);
DESCRIPTION
+^^^^^^^^^^^
Use this function to register your device driver on a parallel port
-('port'). Once you have done that, you will be able to use
+(``port``). Once you have done that, you will be able to use
parport_claim and parport_release in order to use the port.
-The ('name') argument is the name of the device that appears in /proc
+The (``name``) argument is the name of the device that appears in /proc
filesystem. The string must be valid for the whole lifetime of the
device (until parport_unregister_device is called).
This function will register three callbacks into your driver:
-'preempt', 'wakeup' and 'irq'. Each of these may be NULL in order to
+``preempt``, ``wakeup`` and ``irq``. Each of these may be NULL in order to
indicate that you do not want a callback.
-When the 'preempt' function is called, it is because another driver
-wishes to use the parallel port. The 'preempt' function should return
+When the ``preempt`` function is called, it is because another driver
+wishes to use the parallel port. The ``preempt`` function should return
non-zero if the parallel port cannot be released yet -- if zero is
returned, the port is lost to another driver and the port must be
re-claimed before use.
-The 'wakeup' function is called once another driver has released the
+The ``wakeup`` function is called once another driver has released the
port and no other driver has yet claimed it. You can claim the
-parallel port from within the 'wakeup' function (in which case the
+parallel port from within the ``wakeup`` function (in which case the
claim is guaranteed to succeed), or choose not to if you don't need it
now.
If an interrupt occurs on the parallel port your driver has claimed,
-the 'irq' function will be called. (Write something about shared
+the ``irq`` function will be called. (Write something about shared
interrupts here.)
-The 'handle' is a pointer to driver-specific data, and is passed to
+The ``handle`` is a pointer to driver-specific data, and is passed to
the callback functions.
-'flags' may be a bitwise combination of the following flags:
+``flags`` may be a bitwise combination of the following flags:
+ ===================== =================================================
Flag Meaning
+ ===================== =================================================
PARPORT_DEV_EXCL The device cannot share the parallel port at all.
Use this only when absolutely necessary.
+ ===================== =================================================
The typedefs are not actually defined -- they are only shown in order
to make the function prototype more readable.
-The visible parts of the returned 'struct pardevice' are:
+The visible parts of the returned ``struct pardevice`` are::
-struct pardevice {
- struct parport *port; /* Associated port */
- void *private; /* Device driver's 'handle' */
- ...
-};
+ struct pardevice {
+ struct parport *port; /* Associated port */
+ void *private; /* Device driver's 'handle' */
+ ...
+ };
RETURN VALUE
+^^^^^^^^^^^^
-A 'struct pardevice *': a handle to the registered parallel port
+A ``struct pardevice *``: a handle to the registered parallel port
device that can be used for parport_claim, parport_release, etc.
ERRORS
+^^^^^^
A return value of NULL indicates that there was a problem registering
a device on that port.
EXAMPLE
+^^^^^^^
-static int preempt (void *handle)
-{
- if (busy_right_now)
- return 1;
+::
- must_reclaim_port = 1;
- return 0;
-}
+ static int preempt (void *handle)
+ {
+ if (busy_right_now)
+ return 1;
-static void wakeup (void *handle)
-{
- struct toaster *private = handle;
- struct pardevice *dev = private->dev;
- if (!dev) return; /* avoid races */
-
- if (want_port)
- parport_claim (dev);
-}
-
-static int toaster_detect (struct toaster *private, struct parport *port)
-{
- private->dev = parport_register_device (port, "toaster", preempt,
- wakeup, NULL, 0,
- private);
- if (!private->dev)
- /* Couldn't register with parport. */
- return -EIO;
-
- must_reclaim_port = 0;
- busy_right_now = 1;
- parport_claim_or_block (private->dev);
- ...
- /* Don't need the port while the toaster warms up. */
- busy_right_now = 0;
- ...
- busy_right_now = 1;
- if (must_reclaim_port) {
- parport_claim_or_block (private->dev);
- must_reclaim_port = 0;
+ must_reclaim_port = 1;
+ return 0;
}
- ...
-}
+
+ static void wakeup (void *handle)
+ {
+ struct toaster *private = handle;
+ struct pardevice *dev = private->dev;
+ if (!dev) return; /* avoid races */
+
+ if (want_port)
+ parport_claim (dev);
+ }
+
+ static int toaster_detect (struct toaster *private, struct parport *port)
+ {
+ private->dev = parport_register_device (port, "toaster", preempt,
+ wakeup, NULL, 0,
+ private);
+ if (!private->dev)
+ /* Couldn't register with parport. */
+ return -EIO;
+
+ must_reclaim_port = 0;
+ busy_right_now = 1;
+ parport_claim_or_block (private->dev);
+ ...
+ /* Don't need the port while the toaster warms up. */
+ busy_right_now = 0;
+ ...
+ busy_right_now = 1;
+ if (must_reclaim_port) {
+ parport_claim_or_block (private->dev);
+ must_reclaim_port = 0;
+ }
+ ...
+ }
SEE ALSO
+^^^^^^^^
parport_unregister_device, parport_claim
+
+
parport_unregister_device - finish using a port
--------------------------
+-----------------------------------------------
SYNPOPSIS
-#include <linux/parport.h>
+::
-void parport_unregister_device (struct pardevice *dev);
+ #include <linux/parport.h>
+
+ void parport_unregister_device (struct pardevice *dev);
DESCRIPTION
+^^^^^^^^^^^
This function is the opposite of parport_register_device. After using
-parport_unregister_device, 'dev' is no longer a valid device handle.
+parport_unregister_device, ``dev`` is no longer a valid device handle.
You should not unregister a device that is currently claimed, although
if you do it will be released automatically.
EXAMPLE
+^^^^^^^
+
+::
...
kfree (dev->private); /* before we lose the pointer */
@@ -467,460 +528,602 @@
...
SEE ALSO
+^^^^^^^^
+
parport_unregister_driver
parport_claim, parport_claim_or_block - claim the parallel port for a device
--------------------------------------
+----------------------------------------------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-int parport_claim (struct pardevice *dev);
-int parport_claim_or_block (struct pardevice *dev);
+ #include <linux/parport.h>
+
+ int parport_claim (struct pardevice *dev);
+ int parport_claim_or_block (struct pardevice *dev);
DESCRIPTION
+^^^^^^^^^^^
These functions attempt to gain control of the parallel port on which
-'dev' is registered. 'parport_claim' does not block, but
-'parport_claim_or_block' may do. (Put something here about blocking
+``dev`` is registered. ``parport_claim`` does not block, but
+``parport_claim_or_block`` may do. (Put something here about blocking
interruptibly or non-interruptibly.)
You should not try to claim a port that you have already claimed.
RETURN VALUE
+^^^^^^^^^^^^
A return value of zero indicates that the port was successfully
claimed, and the caller now has possession of the parallel port.
-If 'parport_claim_or_block' blocks before returning successfully, the
+If ``parport_claim_or_block`` blocks before returning successfully, the
return value is positive.
ERRORS
+^^^^^^
+========== ==========================================================
-EAGAIN The port is unavailable at the moment, but another attempt
to claim it may succeed.
+========== ==========================================================
SEE ALSO
+^^^^^^^^
+
parport_release
parport_release - release the parallel port
----------------
+-------------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-void parport_release (struct pardevice *dev);
+ #include <linux/parport.h>
+
+ void parport_release (struct pardevice *dev);
DESCRIPTION
+^^^^^^^^^^^
Once a parallel port device has been claimed, it can be released using
-'parport_release'. It cannot fail, but you should not release a
+``parport_release``. It cannot fail, but you should not release a
device that you do not have possession of.
EXAMPLE
+^^^^^^^
-static size_t write (struct pardevice *dev, const void *buf,
- size_t len)
-{
- ...
- written = dev->port->ops->write_ecp_data (dev->port, buf,
- len);
- parport_release (dev);
- ...
-}
+::
+
+ static size_t write (struct pardevice *dev, const void *buf,
+ size_t len)
+ {
+ ...
+ written = dev->port->ops->write_ecp_data (dev->port, buf,
+ len);
+ parport_release (dev);
+ ...
+ }
SEE ALSO
+^^^^^^^^
change_mode, parport_claim, parport_claim_or_block, parport_yield
-
+
+
+
parport_yield, parport_yield_blocking - temporarily release a parallel port
--------------------------------------
+---------------------------------------------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-int parport_yield (struct pardevice *dev)
-int parport_yield_blocking (struct pardevice *dev);
+ #include <linux/parport.h>
+
+ int parport_yield (struct pardevice *dev)
+ int parport_yield_blocking (struct pardevice *dev);
DESCRIPTION
+^^^^^^^^^^^
When a driver has control of a parallel port, it may allow another
-driver to temporarily 'borrow' it. 'parport_yield' does not block;
-'parport_yield_blocking' may do.
+driver to temporarily ``borrow`` it. ``parport_yield`` does not block;
+``parport_yield_blocking`` may do.
RETURN VALUE
+^^^^^^^^^^^^
A return value of zero indicates that the caller still owns the port
and the call did not block.
-A positive return value from 'parport_yield_blocking' indicates that
+A positive return value from ``parport_yield_blocking`` indicates that
the caller still owns the port and the call blocked.
A return value of -EAGAIN indicates that the caller no longer owns the
port, and it must be re-claimed before use.
ERRORS
+^^^^^^
+========= ==========================================================
-EAGAIN Ownership of the parallel port was given away.
+========= ==========================================================
SEE ALSO
+^^^^^^^^
parport_release
+
+
parport_wait_peripheral - wait for status lines, up to 35ms
------------------------
+-----------------------------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-int parport_wait_peripheral (struct parport *port,
- unsigned char mask,
- unsigned char val);
+ #include <linux/parport.h>
+
+ int parport_wait_peripheral (struct parport *port,
+ unsigned char mask,
+ unsigned char val);
DESCRIPTION
+^^^^^^^^^^^
Wait for the status lines in mask to match the values in val.
RETURN VALUE
+^^^^^^^^^^^^
+======== ==========================================================
-EINTR a signal is pending
0 the status lines in mask have values in val
1 timed out while waiting (35ms elapsed)
+======== ==========================================================
SEE ALSO
+^^^^^^^^
parport_poll_peripheral
+
+
parport_poll_peripheral - wait for status lines, in usec
------------------------
+--------------------------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-int parport_poll_peripheral (struct parport *port,
- unsigned char mask,
- unsigned char val,
- int usec);
+ #include <linux/parport.h>
+
+ int parport_poll_peripheral (struct parport *port,
+ unsigned char mask,
+ unsigned char val,
+ int usec);
DESCRIPTION
+^^^^^^^^^^^
Wait for the status lines in mask to match the values in val.
RETURN VALUE
+^^^^^^^^^^^^
+======== ==========================================================
-EINTR a signal is pending
0 the status lines in mask have values in val
1 timed out while waiting (usec microseconds have elapsed)
+======== ==========================================================
SEE ALSO
+^^^^^^^^
parport_wait_peripheral
-
+
+
+
parport_wait_event - wait for an event on a port
-------------------
+------------------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-int parport_wait_event (struct parport *port, signed long timeout)
+ #include <linux/parport.h>
+
+ int parport_wait_event (struct parport *port, signed long timeout)
DESCRIPTION
+^^^^^^^^^^^
Wait for an event (e.g. interrupt) on a port. The timeout is in
jiffies.
RETURN VALUE
+^^^^^^^^^^^^
+======= ==========================================================
0 success
<0 error (exit as soon as possible)
>0 timed out
-
+======= ==========================================================
+
parport_negotiate - perform IEEE 1284 negotiation
------------------
+-------------------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-int parport_negotiate (struct parport *, int mode);
+ #include <linux/parport.h>
+
+ int parport_negotiate (struct parport *, int mode);
DESCRIPTION
+^^^^^^^^^^^
Perform IEEE 1284 negotiation.
RETURN VALUE
+^^^^^^^^^^^^
+======= ==========================================================
0 handshake OK; IEEE 1284 peripheral and mode available
-1 handshake failed; peripheral not compliant (or none present)
1 handshake OK; IEEE 1284 peripheral present but mode not
available
+======= ==========================================================
SEE ALSO
+^^^^^^^^
parport_read, parport_write
-
+
+
+
parport_read - read data from device
-------------
+------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-ssize_t parport_read (struct parport *, void *buf, size_t len);
+ #include <linux/parport.h>
+
+ ssize_t parport_read (struct parport *, void *buf, size_t len);
DESCRIPTION
+^^^^^^^^^^^
Read data from device in current IEEE 1284 transfer mode. This only
works for modes that support reverse data transfer.
RETURN VALUE
+^^^^^^^^^^^^
If negative, an error code; otherwise the number of bytes transferred.
SEE ALSO
+^^^^^^^^
parport_write, parport_negotiate
-
+
+
+
parport_write - write data to device
--------------
+------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-ssize_t parport_write (struct parport *, const void *buf, size_t len);
+ #include <linux/parport.h>
+
+ ssize_t parport_write (struct parport *, const void *buf, size_t len);
DESCRIPTION
+^^^^^^^^^^^
Write data to device in current IEEE 1284 transfer mode. This only
works for modes that support forward data transfer.
RETURN VALUE
+^^^^^^^^^^^^
If negative, an error code; otherwise the number of bytes transferred.
SEE ALSO
+^^^^^^^^
parport_read, parport_negotiate
+
+
parport_open - register device for particular device number
-------------
+-----------------------------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-struct pardevice *parport_open (int devnum, const char *name,
- int (*pf) (void *),
- void (*kf) (void *),
- void (*irqf) (int, void *,
- struct pt_regs *),
- int flags, void *handle);
+ #include <linux/parport.h>
+
+ struct pardevice *parport_open (int devnum, const char *name,
+ int (*pf) (void *),
+ void (*kf) (void *),
+ void (*irqf) (int, void *,
+ struct pt_regs *),
+ int flags, void *handle);
DESCRIPTION
+^^^^^^^^^^^
This is like parport_register_device but takes a device number instead
of a pointer to a struct parport.
RETURN VALUE
+^^^^^^^^^^^^
See parport_register_device. If no device is associated with devnum,
NULL is returned.
SEE ALSO
+^^^^^^^^
parport_register_device
-
+
+
+
parport_close - unregister device for particular device number
--------------
+--------------------------------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-void parport_close (struct pardevice *dev);
+ #include <linux/parport.h>
+
+ void parport_close (struct pardevice *dev);
DESCRIPTION
+^^^^^^^^^^^
This is the equivalent of parport_unregister_device for parport_open.
SEE ALSO
+^^^^^^^^
parport_unregister_device, parport_open
-
+
+
+
parport_device_id - obtain IEEE 1284 Device ID
------------------
+----------------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-ssize_t parport_device_id (int devnum, char *buffer, size_t len);
+ #include <linux/parport.h>
+
+ ssize_t parport_device_id (int devnum, char *buffer, size_t len);
DESCRIPTION
+^^^^^^^^^^^
Obtains the IEEE 1284 Device ID associated with a given device.
RETURN VALUE
+^^^^^^^^^^^^
If negative, an error code; otherwise, the number of bytes of buffer
that contain the device ID. The format of the device ID is as
-follows:
+follows::
-[length][ID]
+ [length][ID]
The first two bytes indicate the inclusive length of the entire Device
ID, and are in big-endian order. The ID is a sequence of pairs of the
-form:
+form::
-key:value;
+ key:value;
NOTES
+^^^^^
Many devices have ill-formed IEEE 1284 Device IDs.
SEE ALSO
+^^^^^^^^
parport_find_class, parport_find_device
-
+
+
+
parport_device_coords - convert device number to device coordinates
-------------------
+-------------------------------------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-int parport_device_coords (int devnum, int *parport, int *mux,
- int *daisy);
+ #include <linux/parport.h>
+
+ int parport_device_coords (int devnum, int *parport, int *mux,
+ int *daisy);
DESCRIPTION
+^^^^^^^^^^^
Convert between device number (zero-based) and device coordinates
(port, multiplexor, daisy chain address).
RETURN VALUE
+^^^^^^^^^^^^
-Zero on success, in which case the coordinates are (*parport, *mux,
-*daisy).
+Zero on success, in which case the coordinates are (``*parport``, ``*mux``,
+``*daisy``).
SEE ALSO
+^^^^^^^^
parport_open, parport_device_id
-
+
+
+
parport_find_class - find a device by its class
-------------------
+-----------------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-typedef enum {
- PARPORT_CLASS_LEGACY = 0, /* Non-IEEE1284 device */
- PARPORT_CLASS_PRINTER,
- PARPORT_CLASS_MODEM,
- PARPORT_CLASS_NET,
- PARPORT_CLASS_HDC, /* Hard disk controller */
- PARPORT_CLASS_PCMCIA,
- PARPORT_CLASS_MEDIA, /* Multimedia device */
- PARPORT_CLASS_FDC, /* Floppy disk controller */
- PARPORT_CLASS_PORTS,
- PARPORT_CLASS_SCANNER,
- PARPORT_CLASS_DIGCAM,
- PARPORT_CLASS_OTHER, /* Anything else */
- PARPORT_CLASS_UNSPEC, /* No CLS field in ID */
- PARPORT_CLASS_SCSIADAPTER
-} parport_device_class;
+ #include <linux/parport.h>
-int parport_find_class (parport_device_class cls, int from);
+ typedef enum {
+ PARPORT_CLASS_LEGACY = 0, /* Non-IEEE1284 device */
+ PARPORT_CLASS_PRINTER,
+ PARPORT_CLASS_MODEM,
+ PARPORT_CLASS_NET,
+ PARPORT_CLASS_HDC, /* Hard disk controller */
+ PARPORT_CLASS_PCMCIA,
+ PARPORT_CLASS_MEDIA, /* Multimedia device */
+ PARPORT_CLASS_FDC, /* Floppy disk controller */
+ PARPORT_CLASS_PORTS,
+ PARPORT_CLASS_SCANNER,
+ PARPORT_CLASS_DIGCAM,
+ PARPORT_CLASS_OTHER, /* Anything else */
+ PARPORT_CLASS_UNSPEC, /* No CLS field in ID */
+ PARPORT_CLASS_SCSIADAPTER
+ } parport_device_class;
+
+ int parport_find_class (parport_device_class cls, int from);
DESCRIPTION
+^^^^^^^^^^^
Find a device by class. The search starts from device number from+1.
RETURN VALUE
+^^^^^^^^^^^^
The device number of the next device in that class, or -1 if no such
device exists.
NOTES
+^^^^^
-Example usage:
+Example usage::
-int devnum = -1;
-while ((devnum = parport_find_class (PARPORT_CLASS_DIGCAM, devnum)) != -1) {
- struct pardevice *dev = parport_open (devnum, ...);
- ...
-}
+ int devnum = -1;
+ while ((devnum = parport_find_class (PARPORT_CLASS_DIGCAM, devnum)) != -1) {
+ struct pardevice *dev = parport_open (devnum, ...);
+ ...
+ }
SEE ALSO
+^^^^^^^^
parport_find_device, parport_open, parport_device_id
-
+
+
+
parport_find_device - find a device by its class
-------------------
+------------------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-int parport_find_device (const char *mfg, const char *mdl, int from);
+ #include <linux/parport.h>
+
+ int parport_find_device (const char *mfg, const char *mdl, int from);
DESCRIPTION
+^^^^^^^^^^^
Find a device by vendor and model. The search starts from device
number from+1.
RETURN VALUE
+^^^^^^^^^^^^
The device number of the next device matching the specifications, or
-1 if no such device exists.
NOTES
+^^^^^
-Example usage:
+Example usage::
-int devnum = -1;
-while ((devnum = parport_find_device ("IOMEGA", "ZIP+", devnum)) != -1) {
- struct pardevice *dev = parport_open (devnum, ...);
- ...
-}
+ int devnum = -1;
+ while ((devnum = parport_find_device ("IOMEGA", "ZIP+", devnum)) != -1) {
+ struct pardevice *dev = parport_open (devnum, ...);
+ ...
+ }
SEE ALSO
+^^^^^^^^
parport_find_class, parport_open, parport_device_id
+
+
parport_set_timeout - set the inactivity timeout
--------------------
+------------------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-long parport_set_timeout (struct pardevice *dev, long inactivity);
+ #include <linux/parport.h>
+
+ long parport_set_timeout (struct pardevice *dev, long inactivity);
DESCRIPTION
+^^^^^^^^^^^
Set the inactivity timeout, in jiffies, for a registered device. The
previous timeout is returned.
RETURN VALUE
+^^^^^^^^^^^^
The previous timeout, in jiffies.
NOTES
+^^^^^
Some of the port->ops functions for a parport may take time, owing to
delays at the peripheral. After the peripheral has not responded for
-'inactivity' jiffies, a timeout will occur and the blocking function
+``inactivity`` jiffies, a timeout will occur and the blocking function
will return.
A timeout of 0 jiffies is a special case: the function must do as much
@@ -932,29 +1135,37 @@
value until set again.
SEE ALSO
+^^^^^^^^
port->ops->xxx_read/write_yyy
-
+
+
+
+
PORT FUNCTIONS
---------------
+==============
The functions in the port->ops structure (struct parport_operations)
are provided by the low-level driver responsible for that port.
port->ops->read_data - read the data register
---------------------
+---------------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-struct parport_operations {
- ...
- unsigned char (*read_data) (struct parport *port);
- ...
-};
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ unsigned char (*read_data) (struct parport *port);
+ ...
+ };
DESCRIPTION
+^^^^^^^^^^^
If port->modes contains the PARPORT_MODE_TRISTATE flag and the
PARPORT_CONTROL_DIRECTION bit in the control register is set, this
@@ -964,45 +1175,59 @@
register. Otherwise the return value is undefined.
SEE ALSO
+^^^^^^^^
write_data, read_status, write_control
+
+
port->ops->write_data - write the data register
----------------------
+-----------------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-struct parport_operations {
- ...
- void (*write_data) (struct parport *port, unsigned char d);
- ...
-};
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ void (*write_data) (struct parport *port, unsigned char d);
+ ...
+ };
DESCRIPTION
+^^^^^^^^^^^
Writes to the data register. May have side-effects (a STROBE pulse,
for instance).
SEE ALSO
+^^^^^^^^
read_data, read_status, write_control
+
+
port->ops->read_status - read the status register
-----------------------
+-------------------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-struct parport_operations {
- ...
- unsigned char (*read_status) (struct parport *port);
- ...
-};
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ unsigned char (*read_status) (struct parport *port);
+ ...
+ };
DESCRIPTION
+^^^^^^^^^^^
Reads from the status register. This is a bitmask:
@@ -1015,76 +1240,98 @@
There may be other bits set.
SEE ALSO
+^^^^^^^^
read_data, write_data, write_control
+
+
port->ops->read_control - read the control register
------------------------
+---------------------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-struct parport_operations {
- ...
- unsigned char (*read_control) (struct parport *port);
- ...
-};
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ unsigned char (*read_control) (struct parport *port);
+ ...
+ };
DESCRIPTION
+^^^^^^^^^^^
Returns the last value written to the control register (either from
write_control or frob_control). No port access is performed.
SEE ALSO
+^^^^^^^^
read_data, write_data, read_status, write_control
+
+
port->ops->write_control - write the control register
-------------------------
+-----------------------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-struct parport_operations {
- ...
- void (*write_control) (struct parport *port, unsigned char s);
- ...
-};
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ void (*write_control) (struct parport *port, unsigned char s);
+ ...
+ };
DESCRIPTION
+^^^^^^^^^^^
-Writes to the control register. This is a bitmask:
- _______
-- PARPORT_CONTROL_STROBE (nStrobe)
- _______
-- PARPORT_CONTROL_AUTOFD (nAutoFd)
- _____
-- PARPORT_CONTROL_INIT (nInit)
- _________
-- PARPORT_CONTROL_SELECT (nSelectIn)
+Writes to the control register. This is a bitmask::
+
+ _______
+ - PARPORT_CONTROL_STROBE (nStrobe)
+ _______
+ - PARPORT_CONTROL_AUTOFD (nAutoFd)
+ _____
+ - PARPORT_CONTROL_INIT (nInit)
+ _________
+ - PARPORT_CONTROL_SELECT (nSelectIn)
SEE ALSO
+^^^^^^^^
read_data, write_data, read_status, frob_control
+
+
port->ops->frob_control - write control register bits
------------------------
+-----------------------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-struct parport_operations {
- ...
- unsigned char (*frob_control) (struct parport *port,
- unsigned char mask,
- unsigned char val);
- ...
-};
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ unsigned char (*frob_control) (struct parport *port,
+ unsigned char mask,
+ unsigned char val);
+ ...
+ };
DESCRIPTION
+^^^^^^^^^^^
This is equivalent to reading from the control register, masking out
the bits in mask, exclusive-or'ing with the bits in val, and writing
@@ -1095,23 +1342,30 @@
port access.
SEE ALSO
+^^^^^^^^
read_data, write_data, read_status, write_control
+
+
port->ops->enable_irq - enable interrupt generation
----------------------
+---------------------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-struct parport_operations {
- ...
- void (*enable_irq) (struct parport *port);
- ...
-};
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ void (*enable_irq) (struct parport *port);
+ ...
+ };
DESCRIPTION
+^^^^^^^^^^^
The parallel port hardware is instructed to generate interrupts at
appropriate moments, although those moments are
@@ -1119,353 +1373,460 @@
commonly generated on the rising edge of nAck.
SEE ALSO
+^^^^^^^^
disable_irq
+
+
port->ops->disable_irq - disable interrupt generation
-----------------------
+-----------------------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-struct parport_operations {
- ...
- void (*disable_irq) (struct parport *port);
- ...
-};
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ void (*disable_irq) (struct parport *port);
+ ...
+ };
DESCRIPTION
+^^^^^^^^^^^
The parallel port hardware is instructed not to generate interrupts.
The interrupt itself is not masked.
SEE ALSO
+^^^^^^^^
enable_irq
+
+
port->ops->data_forward - enable data drivers
------------------------
+---------------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-struct parport_operations {
- ...
- void (*data_forward) (struct parport *port);
- ...
-};
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ void (*data_forward) (struct parport *port);
+ ...
+ };
DESCRIPTION
+^^^^^^^^^^^
Enables the data line drivers, for 8-bit host-to-peripheral
communications.
SEE ALSO
+^^^^^^^^
data_reverse
+
+
port->ops->data_reverse - tristate the buffer
------------------------
+---------------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-struct parport_operations {
- ...
- void (*data_reverse) (struct parport *port);
- ...
-};
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ void (*data_reverse) (struct parport *port);
+ ...
+ };
DESCRIPTION
+^^^^^^^^^^^
Places the data bus in a high impedance state, if port->modes has the
PARPORT_MODE_TRISTATE bit set.
SEE ALSO
+^^^^^^^^
data_forward
-
+
+
+
port->ops->epp_write_data - write EPP data
--------------------------
+------------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-struct parport_operations {
- ...
- size_t (*epp_write_data) (struct parport *port, const void *buf,
- size_t len, int flags);
- ...
-};
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ size_t (*epp_write_data) (struct parport *port, const void *buf,
+ size_t len, int flags);
+ ...
+ };
DESCRIPTION
+^^^^^^^^^^^
Writes data in EPP mode, and returns the number of bytes written.
-The 'flags' parameter may be one or more of the following,
+The ``flags`` parameter may be one or more of the following,
bitwise-or'ed together:
+======================= =================================================
PARPORT_EPP_FAST Use fast transfers. Some chips provide 16-bit and
32-bit registers. However, if a transfer
times out, the return value may be unreliable.
+======================= =================================================
SEE ALSO
+^^^^^^^^
epp_read_data, epp_write_addr, epp_read_addr
+
+
port->ops->epp_read_data - read EPP data
-------------------------
+----------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-struct parport_operations {
- ...
- size_t (*epp_read_data) (struct parport *port, void *buf,
- size_t len, int flags);
- ...
-};
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ size_t (*epp_read_data) (struct parport *port, void *buf,
+ size_t len, int flags);
+ ...
+ };
DESCRIPTION
+^^^^^^^^^^^
Reads data in EPP mode, and returns the number of bytes read.
-The 'flags' parameter may be one or more of the following,
+The ``flags`` parameter may be one or more of the following,
bitwise-or'ed together:
+======================= =================================================
PARPORT_EPP_FAST Use fast transfers. Some chips provide 16-bit and
32-bit registers. However, if a transfer
times out, the return value may be unreliable.
+======================= =================================================
SEE ALSO
+^^^^^^^^
epp_write_data, epp_write_addr, epp_read_addr
-
+
+
+
port->ops->epp_write_addr - write EPP address
--------------------------
+---------------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-struct parport_operations {
- ...
- size_t (*epp_write_addr) (struct parport *port,
- const void *buf, size_t len, int flags);
- ...
-};
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ size_t (*epp_write_addr) (struct parport *port,
+ const void *buf, size_t len, int flags);
+ ...
+ };
DESCRIPTION
+^^^^^^^^^^^
Writes EPP addresses (8 bits each), and returns the number written.
-The 'flags' parameter may be one or more of the following,
+The ``flags`` parameter may be one or more of the following,
bitwise-or'ed together:
+======================= =================================================
PARPORT_EPP_FAST Use fast transfers. Some chips provide 16-bit and
32-bit registers. However, if a transfer
times out, the return value may be unreliable.
+======================= =================================================
(Does PARPORT_EPP_FAST make sense for this function?)
SEE ALSO
+^^^^^^^^
epp_write_data, epp_read_data, epp_read_addr
+
+
port->ops->epp_read_addr - read EPP address
-------------------------
+-------------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-struct parport_operations {
- ...
- size_t (*epp_read_addr) (struct parport *port, void *buf,
- size_t len, int flags);
- ...
-};
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ size_t (*epp_read_addr) (struct parport *port, void *buf,
+ size_t len, int flags);
+ ...
+ };
DESCRIPTION
+^^^^^^^^^^^
Reads EPP addresses (8 bits each), and returns the number read.
-The 'flags' parameter may be one or more of the following,
+The ``flags`` parameter may be one or more of the following,
bitwise-or'ed together:
+======================= =================================================
PARPORT_EPP_FAST Use fast transfers. Some chips provide 16-bit and
32-bit registers. However, if a transfer
times out, the return value may be unreliable.
+======================= =================================================
(Does PARPORT_EPP_FAST make sense for this function?)
SEE ALSO
+^^^^^^^^
epp_write_data, epp_read_data, epp_write_addr
+
+
port->ops->ecp_write_data - write a block of ECP data
--------------------------
+-----------------------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-struct parport_operations {
- ...
- size_t (*ecp_write_data) (struct parport *port,
- const void *buf, size_t len, int flags);
- ...
-};
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ size_t (*ecp_write_data) (struct parport *port,
+ const void *buf, size_t len, int flags);
+ ...
+ };
DESCRIPTION
+^^^^^^^^^^^
-Writes a block of ECP data. The 'flags' parameter is ignored.
+Writes a block of ECP data. The ``flags`` parameter is ignored.
RETURN VALUE
+^^^^^^^^^^^^
The number of bytes written.
SEE ALSO
+^^^^^^^^
ecp_read_data, ecp_write_addr
+
+
port->ops->ecp_read_data - read a block of ECP data
-------------------------
+---------------------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-struct parport_operations {
- ...
- size_t (*ecp_read_data) (struct parport *port,
- void *buf, size_t len, int flags);
- ...
-};
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ size_t (*ecp_read_data) (struct parport *port,
+ void *buf, size_t len, int flags);
+ ...
+ };
DESCRIPTION
+^^^^^^^^^^^
-Reads a block of ECP data. The 'flags' parameter is ignored.
+Reads a block of ECP data. The ``flags`` parameter is ignored.
RETURN VALUE
+^^^^^^^^^^^^
The number of bytes read. NB. There may be more unread data in a
FIFO. Is there a way of stunning the FIFO to prevent this?
SEE ALSO
+^^^^^^^^
ecp_write_block, ecp_write_addr
-
+
+
+
port->ops->ecp_write_addr - write a block of ECP addresses
--------------------------
+----------------------------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-struct parport_operations {
- ...
- size_t (*ecp_write_addr) (struct parport *port,
- const void *buf, size_t len, int flags);
- ...
-};
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ size_t (*ecp_write_addr) (struct parport *port,
+ const void *buf, size_t len, int flags);
+ ...
+ };
DESCRIPTION
+^^^^^^^^^^^
-Writes a block of ECP addresses. The 'flags' parameter is ignored.
+Writes a block of ECP addresses. The ``flags`` parameter is ignored.
RETURN VALUE
+^^^^^^^^^^^^
The number of bytes written.
NOTES
+^^^^^
This may use a FIFO, and if so shall not return until the FIFO is empty.
SEE ALSO
+^^^^^^^^
ecp_read_data, ecp_write_data
-
+
+
+
port->ops->nibble_read_data - read a block of data in nibble mode
----------------------------
+-----------------------------------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-struct parport_operations {
- ...
- size_t (*nibble_read_data) (struct parport *port,
- void *buf, size_t len, int flags);
- ...
-};
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ size_t (*nibble_read_data) (struct parport *port,
+ void *buf, size_t len, int flags);
+ ...
+ };
DESCRIPTION
+^^^^^^^^^^^
-Reads a block of data in nibble mode. The 'flags' parameter is ignored.
+Reads a block of data in nibble mode. The ``flags`` parameter is ignored.
RETURN VALUE
+^^^^^^^^^^^^
The number of whole bytes read.
SEE ALSO
+^^^^^^^^
byte_read_data, compat_write_data
+
+
port->ops->byte_read_data - read a block of data in byte mode
--------------------------
+-------------------------------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-struct parport_operations {
- ...
- size_t (*byte_read_data) (struct parport *port,
- void *buf, size_t len, int flags);
- ...
-};
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ size_t (*byte_read_data) (struct parport *port,
+ void *buf, size_t len, int flags);
+ ...
+ };
DESCRIPTION
+^^^^^^^^^^^
-Reads a block of data in byte mode. The 'flags' parameter is ignored.
+Reads a block of data in byte mode. The ``flags`` parameter is ignored.
RETURN VALUE
+^^^^^^^^^^^^
The number of bytes read.
SEE ALSO
+^^^^^^^^
nibble_read_data, compat_write_data
+
+
port->ops->compat_write_data - write a block of data in compatibility mode
-----------------------------
+--------------------------------------------------------------------------
SYNOPSIS
+^^^^^^^^
-#include <linux/parport.h>
+::
-struct parport_operations {
- ...
- size_t (*compat_write_data) (struct parport *port,
- const void *buf, size_t len, int flags);
- ...
-};
+ #include <linux/parport.h>
+
+ struct parport_operations {
+ ...
+ size_t (*compat_write_data) (struct parport *port,
+ const void *buf, size_t len, int flags);
+ ...
+ };
DESCRIPTION
+^^^^^^^^^^^
-Writes a block of data in compatibility mode. The 'flags' parameter
+Writes a block of data in compatibility mode. The ``flags`` parameter
is ignored.
RETURN VALUE
+^^^^^^^^^^^^
The number of bytes written.
SEE ALSO
+^^^^^^^^
nibble_read_data, byte_read_data
diff --git a/Documentation/percpu-rw-semaphore.txt b/Documentation/percpu-rw-semaphore.txt
index 7d3c824..247de64 100644
--- a/Documentation/percpu-rw-semaphore.txt
+++ b/Documentation/percpu-rw-semaphore.txt
@@ -1,5 +1,6 @@
+====================
Percpu rw semaphores
---------------------
+====================
Percpu rw semaphores is a new read-write semaphore design that is
optimized for locking for reading.
diff --git a/Documentation/phy.txt b/Documentation/phy.txt
index 383cdd8..457c3e0 100644
--- a/Documentation/phy.txt
+++ b/Documentation/phy.txt
@@ -1,10 +1,14 @@
- PHY SUBSYSTEM
- Kishon Vijay Abraham I <kishon@ti.com>
+=============
+PHY subsystem
+=============
+
+:Author: Kishon Vijay Abraham I <kishon@ti.com>
This document explains the Generic PHY Framework along with the APIs provided,
and how-to-use.
-1. Introduction
+Introduction
+============
*PHY* is the abbreviation for physical layer. It is used to connect a device
to the physical medium e.g., the USB controller has a PHY to provide functions
@@ -21,7 +25,8 @@
This framework will be of use only to devices that use external PHY (PHY
functionality is not embedded within the controller).
-2. Registering/Unregistering the PHY provider
+Registering/Unregistering the PHY provider
+==========================================
PHY provider refers to an entity that implements one or more PHY instances.
For the simple case where the PHY provider implements only a single instance of
@@ -30,11 +35,14 @@
should provide its own implementation of of_xlate. of_xlate is used only for
dt boot case.
-#define of_phy_provider_register(dev, xlate) \
- __of_phy_provider_register((dev), NULL, THIS_MODULE, (xlate))
+::
-#define devm_of_phy_provider_register(dev, xlate) \
- __devm_of_phy_provider_register((dev), NULL, THIS_MODULE, (xlate))
+ #define of_phy_provider_register(dev, xlate) \
+ __of_phy_provider_register((dev), NULL, THIS_MODULE, (xlate))
+
+ #define devm_of_phy_provider_register(dev, xlate) \
+ __devm_of_phy_provider_register((dev), NULL, THIS_MODULE,
+ (xlate))
of_phy_provider_register and devm_of_phy_provider_register macros can be used to
register the phy_provider and it takes device and of_xlate as
@@ -47,28 +55,35 @@
level of_phy_provider_register_full() and devm_of_phy_provider_register_full()
macros can be used to override the node containing the children.
-#define of_phy_provider_register_full(dev, children, xlate) \
- __of_phy_provider_register(dev, children, THIS_MODULE, xlate)
+::
-#define devm_of_phy_provider_register_full(dev, children, xlate) \
- __devm_of_phy_provider_register_full(dev, children, THIS_MODULE, xlate)
+ #define of_phy_provider_register_full(dev, children, xlate) \
+ __of_phy_provider_register(dev, children, THIS_MODULE, xlate)
-void devm_of_phy_provider_unregister(struct device *dev,
- struct phy_provider *phy_provider);
-void of_phy_provider_unregister(struct phy_provider *phy_provider);
+ #define devm_of_phy_provider_register_full(dev, children, xlate) \
+ __devm_of_phy_provider_register_full(dev, children,
+ THIS_MODULE, xlate)
+
+ void devm_of_phy_provider_unregister(struct device *dev,
+ struct phy_provider *phy_provider);
+ void of_phy_provider_unregister(struct phy_provider *phy_provider);
devm_of_phy_provider_unregister and of_phy_provider_unregister can be used to
unregister the PHY.
-3. Creating the PHY
+Creating the PHY
+================
The PHY driver should create the PHY in order for other peripheral controllers
to make use of it. The PHY framework provides 2 APIs to create the PHY.
-struct phy *phy_create(struct device *dev, struct device_node *node,
- const struct phy_ops *ops);
-struct phy *devm_phy_create(struct device *dev, struct device_node *node,
- const struct phy_ops *ops);
+::
+
+ struct phy *phy_create(struct device *dev, struct device_node *node,
+ const struct phy_ops *ops);
+ struct phy *devm_phy_create(struct device *dev,
+ struct device_node *node,
+ const struct phy_ops *ops);
The PHY drivers can use one of the above 2 APIs to create the PHY by passing
the device pointer and phy ops.
@@ -84,12 +99,16 @@
Before the controller can make use of the PHY, it has to get a reference to
it. This framework provides the following APIs to get a reference to the PHY.
-struct phy *phy_get(struct device *dev, const char *string);
-struct phy *phy_optional_get(struct device *dev, const char *string);
-struct phy *devm_phy_get(struct device *dev, const char *string);
-struct phy *devm_phy_optional_get(struct device *dev, const char *string);
-struct phy *devm_of_phy_get_by_index(struct device *dev, struct device_node *np,
- int index);
+::
+
+ struct phy *phy_get(struct device *dev, const char *string);
+ struct phy *phy_optional_get(struct device *dev, const char *string);
+ struct phy *devm_phy_get(struct device *dev, const char *string);
+ struct phy *devm_phy_optional_get(struct device *dev,
+ const char *string);
+ struct phy *devm_of_phy_get_by_index(struct device *dev,
+ struct device_node *np,
+ int index);
phy_get, phy_optional_get, devm_phy_get and devm_phy_optional_get can
be used to get the PHY. In the case of dt boot, the string arguments
@@ -111,30 +130,35 @@
phy_power_off() calls are all NOP when applied to a NULL phy. The NULL
phy is useful in devices for handling optional phy devices.
-5. Releasing a reference to the PHY
+Releasing a reference to the PHY
+================================
When the controller no longer needs the PHY, it has to release the reference
to the PHY it has obtained using the APIs mentioned in the above section. The
PHY framework provides 2 APIs to release a reference to the PHY.
-void phy_put(struct phy *phy);
-void devm_phy_put(struct device *dev, struct phy *phy);
+::
+
+ void phy_put(struct phy *phy);
+ void devm_phy_put(struct device *dev, struct phy *phy);
Both these APIs are used to release a reference to the PHY and devm_phy_put
destroys the devres associated with this PHY.
-6. Destroying the PHY
+Destroying the PHY
+==================
When the driver that created the PHY is unloaded, it should destroy the PHY it
-created using one of the following 2 APIs.
+created using one of the following 2 APIs::
-void phy_destroy(struct phy *phy);
-void devm_phy_destroy(struct device *dev, struct phy *phy);
+ void phy_destroy(struct phy *phy);
+ void devm_phy_destroy(struct device *dev, struct phy *phy);
Both these APIs destroy the PHY and devm_phy_destroy destroys the devres
associated with this PHY.
-7. PM Runtime
+PM Runtime
+==========
This subsystem is pm runtime enabled. So while creating the PHY,
pm_runtime_enable of the phy device created by this subsystem is called and
@@ -150,7 +174,8 @@
phy_pm_runtime_put, phy_pm_runtime_put_sync, phy_pm_runtime_allow and
phy_pm_runtime_forbid for performing PM operations.
-8. PHY Mappings
+PHY Mappings
+============
In order to get reference to a PHY without help from DeviceTree, the framework
offers lookups which can be compared to clkdev that allow clk structures to be
@@ -158,12 +183,15 @@
the struct phy already exists.
The framework offers the following API for registering and unregistering the
-lookups.
+lookups::
-int phy_create_lookup(struct phy *phy, const char *con_id, const char *dev_id);
-void phy_remove_lookup(struct phy *phy, const char *con_id, const char *dev_id);
+ int phy_create_lookup(struct phy *phy, const char *con_id,
+ const char *dev_id);
+ void phy_remove_lookup(struct phy *phy, const char *con_id,
+ const char *dev_id);
-9. DeviceTree Binding
+DeviceTree Binding
+==================
The documentation for PHY dt binding can be found @
Documentation/devicetree/bindings/phy/phy-bindings.txt
diff --git a/Documentation/pi-futex.txt b/Documentation/pi-futex.txt
index 9a5bc86..aafddbe 100644
--- a/Documentation/pi-futex.txt
+++ b/Documentation/pi-futex.txt
@@ -1,5 +1,6 @@
+======================
Lightweight PI-futexes
-----------------------
+======================
We are calling them lightweight for 3 reasons:
@@ -25,8 +26,8 @@
improve the statistical distribution of locking related application
delays.
-The longer reply:
------------------
+The longer reply
+----------------
Firstly, sharing locks between multiple tasks is a common programming
technique that often cannot be replaced with lockless algorithms. As we
@@ -71,8 +72,8 @@
could preempt the low-prio task while it holds the shared lock and
executes the critical section, and could delay it indefinitely.
-Implementation:
----------------
+Implementation
+--------------
As mentioned before, the userspace fastpath of PI-enabled pthread
mutexes involves no kernel work at all - they behave quite similarly to
@@ -83,8 +84,8 @@
To handle the slowpath, we have added two new futex ops:
- FUTEX_LOCK_PI
- FUTEX_UNLOCK_PI
+ - FUTEX_LOCK_PI
+ - FUTEX_UNLOCK_PI
If the lock-acquire fastpath fails, [i.e. an atomic transition from 0 to
TID fails], then FUTEX_LOCK_PI is called. The kernel does all the
diff --git a/Documentation/pnp.txt b/Documentation/pnp.txt
index 763e465..bab2d10 100644
--- a/Documentation/pnp.txt
+++ b/Documentation/pnp.txt
@@ -1,98 +1,118 @@
+=================================
Linux Plug and Play Documentation
-by Adam Belay <ambx1@neo.rr.com>
-last updated: Oct. 16, 2002
----------------------------------------------------------------------------------------
+=================================
+:Author: Adam Belay <ambx1@neo.rr.com>
+:Last updated: Oct. 16, 2002
Overview
--------
- Plug and Play provides a means of detecting and setting resources for legacy or
+
+Plug and Play provides a means of detecting and setting resources for legacy or
otherwise unconfigurable devices. The Linux Plug and Play Layer provides these
services to compatible drivers.
-
The User Interface
------------------
- The Linux Plug and Play user interface provides a means to activate PnP devices
+
+The Linux Plug and Play user interface provides a means to activate PnP devices
for legacy and user level drivers that do not support Linux Plug and Play. The
user interface is integrated into sysfs.
In addition to the standard sysfs file the following are created in each
device's directory:
-id - displays a list of support EISA IDs
-options - displays possible resource configurations
-resources - displays currently allocated resources and allows resource changes
+- id - displays a list of support EISA IDs
+- options - displays possible resource configurations
+- resources - displays currently allocated resources and allows resource changes
--activating a device
+activating a device
+^^^^^^^^^^^^^^^^^^^
-#echo "auto" > resources
+::
+
+ # echo "auto" > resources
this will invoke the automatic resource config system to activate the device
--manually activating a device
+manually activating a device
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-#echo "manual <depnum> <mode>" > resources
-<depnum> - the configuration number
-<mode> - static or dynamic
- static = for next boot
- dynamic = now
+::
--disabling a device
+ # echo "manual <depnum> <mode>" > resources
-#echo "disable" > resources
+ <depnum> - the configuration number
+ <mode> - static or dynamic
+ static = for next boot
+ dynamic = now
+
+disabling a device
+^^^^^^^^^^^^^^^^^^
+
+::
+
+ # echo "disable" > resources
EXAMPLE:
Suppose you need to activate the floppy disk controller.
-1.) change to the proper directory, in my case it is
-/driver/bus/pnp/devices/00:0f
-# cd /driver/bus/pnp/devices/00:0f
-# cat name
-PC standard floppy disk controller
-2.) check if the device is already active
-# cat resources
-DISABLED
+1. change to the proper directory, in my case it is
+ /driver/bus/pnp/devices/00:0f::
-- Notice the string "DISABLED". This means the device is not active.
+ # cd /driver/bus/pnp/devices/00:0f
+ # cat name
+ PC standard floppy disk controller
-3.) check the device's possible configurations (optional)
-# cat options
-Dependent: 01 - Priority acceptable
- port 0x3f0-0x3f0, align 0x7, size 0x6, 16-bit address decoding
- port 0x3f7-0x3f7, align 0x0, size 0x1, 16-bit address decoding
- irq 6
- dma 2 8-bit compatible
-Dependent: 02 - Priority acceptable
- port 0x370-0x370, align 0x7, size 0x6, 16-bit address decoding
- port 0x377-0x377, align 0x0, size 0x1, 16-bit address decoding
- irq 6
- dma 2 8-bit compatible
+2. check if the device is already active::
-4.) now activate the device
-# echo "auto" > resources
+ # cat resources
+ DISABLED
-5.) finally check if the device is active
-# cat resources
-io 0x3f0-0x3f5
-io 0x3f7-0x3f7
-irq 6
-dma 2
+ - Notice the string "DISABLED". This means the device is not active.
-also there are a series of kernel parameters:
-pnp_reserve_irq=irq1[,irq2] ....
-pnp_reserve_dma=dma1[,dma2] ....
-pnp_reserve_io=io1,size1[,io2,size2] ....
-pnp_reserve_mem=mem1,size1[,mem2,size2] ....
+3. check the device's possible configurations (optional)::
+
+ # cat options
+ Dependent: 01 - Priority acceptable
+ port 0x3f0-0x3f0, align 0x7, size 0x6, 16-bit address decoding
+ port 0x3f7-0x3f7, align 0x0, size 0x1, 16-bit address decoding
+ irq 6
+ dma 2 8-bit compatible
+ Dependent: 02 - Priority acceptable
+ port 0x370-0x370, align 0x7, size 0x6, 16-bit address decoding
+ port 0x377-0x377, align 0x0, size 0x1, 16-bit address decoding
+ irq 6
+ dma 2 8-bit compatible
+
+4. now activate the device::
+
+ # echo "auto" > resources
+
+5. finally check if the device is active::
+
+ # cat resources
+ io 0x3f0-0x3f5
+ io 0x3f7-0x3f7
+ irq 6
+ dma 2
+
+also there are a series of kernel parameters::
+
+ pnp_reserve_irq=irq1[,irq2] ....
+ pnp_reserve_dma=dma1[,dma2] ....
+ pnp_reserve_io=io1,size1[,io2,size2] ....
+ pnp_reserve_mem=mem1,size1[,mem2,size2] ....
The Unified Plug and Play Layer
-------------------------------
- All Plug and Play drivers, protocols, and services meet at a central location
+
+All Plug and Play drivers, protocols, and services meet at a central location
called the Plug and Play Layer. This layer is responsible for the exchange of
information between PnP drivers and PnP protocols. Thus it automatically
forwards commands to the proper protocol. This makes writing PnP drivers
@@ -101,64 +121,73 @@
The following functions are available from the Plug and Play Layer:
pnp_get_protocol
-- increments the number of uses by one
+ increments the number of uses by one
pnp_put_protocol
-- deincrements the number of uses by one
+ deincrements the number of uses by one
pnp_register_protocol
-- use this to register a new PnP protocol
+ use this to register a new PnP protocol
pnp_unregister_protocol
-- use this function to remove a PnP protocol from the Plug and Play Layer
+ use this function to remove a PnP protocol from the Plug and Play Layer
pnp_register_driver
-- adds a PnP driver to the Plug and Play Layer
-- this includes driver model integration
-- returns zero for success or a negative error number for failure; count
+ adds a PnP driver to the Plug and Play Layer
+
+ this includes driver model integration
+ returns zero for success or a negative error number for failure; count
calls to the .add() method if you need to know how many devices bind to
the driver
pnp_unregister_driver
-- removes a PnP driver from the Plug and Play Layer
+ removes a PnP driver from the Plug and Play Layer
Plug and Play Protocols
-----------------------
- This section contains information for PnP protocol developers.
+
+This section contains information for PnP protocol developers.
The following Protocols are currently available in the computing world:
-- PNPBIOS: used for system devices such as serial and parallel ports.
-- ISAPNP: provides PnP support for the ISA bus
-- ACPI: among its many uses, ACPI provides information about system level
-devices.
+
+- PNPBIOS:
+ used for system devices such as serial and parallel ports.
+- ISAPNP:
+ provides PnP support for the ISA bus
+- ACPI:
+ among its many uses, ACPI provides information about system level
+ devices.
+
It is meant to replace the PNPBIOS. It is not currently supported by Linux
Plug and Play but it is planned to be in the near future.
Requirements for a Linux PnP protocol:
-1.) the protocol must use EISA IDs
-2.) the protocol must inform the PnP Layer of a device's current configuration
+1. the protocol must use EISA IDs
+2. the protocol must inform the PnP Layer of a device's current configuration
+
- the ability to set resources is optional but preferred.
The following are PnP protocol related functions:
pnp_add_device
-- use this function to add a PnP device to the PnP layer
-- only call this function when all wanted values are set in the pnp_dev
-structure
+ use this function to add a PnP device to the PnP layer
+
+ only call this function when all wanted values are set in the pnp_dev
+ structure
pnp_init_device
-- call this to initialize the PnP structure
+ call this to initialize the PnP structure
pnp_remove_device
-- call this to remove a device from the Plug and Play Layer.
-- it will fail if the device is still in use.
-- automatically will free mem used by the device and related structures
+ call this to remove a device from the Plug and Play Layer.
+ it will fail if the device is still in use.
+ automatically will free mem used by the device and related structures
pnp_add_id
-- adds an EISA ID to the list of supported IDs for the specified device
+ adds an EISA ID to the list of supported IDs for the specified device
For more information consult the source of a protocol such as
/drivers/pnp/pnpbios/core.c.
@@ -167,85 +196,97 @@
Linux Plug and Play Drivers
---------------------------
- This section contains information for Linux PnP driver developers.
+
+This section contains information for Linux PnP driver developers.
The New Way
-...........
-1.) first make a list of supported EISA IDS
-ex:
-static const struct pnp_id pnp_dev_table[] = {
- /* Standard LPT Printer Port */
- {.id = "PNP0400", .driver_data = 0},
- /* ECP Printer Port */
- {.id = "PNP0401", .driver_data = 0},
- {.id = ""}
-};
+^^^^^^^^^^^
-Please note that the character 'X' can be used as a wild card in the function
-portion (last four characters).
-ex:
+1. first make a list of supported EISA IDS
+
+ ex::
+
+ static const struct pnp_id pnp_dev_table[] = {
+ /* Standard LPT Printer Port */
+ {.id = "PNP0400", .driver_data = 0},
+ /* ECP Printer Port */
+ {.id = "PNP0401", .driver_data = 0},
+ {.id = ""}
+ };
+
+ Please note that the character 'X' can be used as a wild card in the function
+ portion (last four characters).
+
+ ex::
+
/* Unknown PnP modems */
{ "PNPCXXX", UNKNOWN_DEV },
-Supported PnP card IDs can optionally be defined.
-ex:
-static const struct pnp_id pnp_card_table[] = {
- { "ANYDEVS", 0 },
- { "", 0 }
-};
+ Supported PnP card IDs can optionally be defined.
+ ex::
-2.) Optionally define probe and remove functions. It may make sense not to
-define these functions if the driver already has a reliable method of detecting
-the resources, such as the parport_pc driver.
-ex:
-static int
-serial_pnp_probe(struct pnp_dev * dev, const struct pnp_id *card_id, const
- struct pnp_id *dev_id)
-{
-. . .
+ static const struct pnp_id pnp_card_table[] = {
+ { "ANYDEVS", 0 },
+ { "", 0 }
+ };
-ex:
-static void serial_pnp_remove(struct pnp_dev * dev)
-{
-. . .
+2. Optionally define probe and remove functions. It may make sense not to
+ define these functions if the driver already has a reliable method of detecting
+ the resources, such as the parport_pc driver.
-consult /drivers/serial/8250_pnp.c for more information.
+ ex::
-3.) create a driver structure
-ex:
+ static int
+ serial_pnp_probe(struct pnp_dev * dev, const struct pnp_id *card_id, const
+ struct pnp_id *dev_id)
+ {
+ . . .
-static struct pnp_driver serial_pnp_driver = {
- .name = "serial",
- .card_id_table = pnp_card_table,
- .id_table = pnp_dev_table,
- .probe = serial_pnp_probe,
- .remove = serial_pnp_remove,
-};
+ ex::
-* name and id_table cannot be NULL.
+ static void serial_pnp_remove(struct pnp_dev * dev)
+ {
+ . . .
-4.) register the driver
-ex:
+ consult /drivers/serial/8250_pnp.c for more information.
-static int __init serial8250_pnp_init(void)
-{
- return pnp_register_driver(&serial_pnp_driver);
-}
+3. create a driver structure
+
+ ex::
+
+ static struct pnp_driver serial_pnp_driver = {
+ .name = "serial",
+ .card_id_table = pnp_card_table,
+ .id_table = pnp_dev_table,
+ .probe = serial_pnp_probe,
+ .remove = serial_pnp_remove,
+ };
+
+ * name and id_table cannot be NULL.
+
+4. register the driver
+
+ ex::
+
+ static int __init serial8250_pnp_init(void)
+ {
+ return pnp_register_driver(&serial_pnp_driver);
+ }
The Old Way
-...........
+^^^^^^^^^^^
A series of compatibility functions have been created to make it easy to convert
ISAPNP drivers. They should serve as a temporary solution only.
-They are as follows:
+They are as follows::
-struct pnp_card *pnp_find_card(unsigned short vendor,
- unsigned short device,
- struct pnp_card *from)
+ struct pnp_card *pnp_find_card(unsigned short vendor,
+ unsigned short device,
+ struct pnp_card *from)
-struct pnp_dev *pnp_find_dev(struct pnp_card *card,
- unsigned short vendor,
- unsigned short function,
- struct pnp_dev *from)
+ struct pnp_dev *pnp_find_dev(struct pnp_card *card,
+ unsigned short vendor,
+ unsigned short function,
+ struct pnp_dev *from)
diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt
index 0fde3dc..625549d 100644
--- a/Documentation/power/runtime_pm.txt
+++ b/Documentation/power/runtime_pm.txt
@@ -435,7 +435,8 @@
PM status to 'suspended' and update its parent's counter of 'active'
children as appropriate (it is only valid to use this function if
'power.runtime_error' is set or 'power.disable_depth' is greater than
- zero)
+ zero); it will fail and return an error code if the device has a child
+ which is active and the 'power.ignore_children' flag is unset
bool pm_runtime_active(struct device *dev);
- return true if the device's runtime PM status is 'active' or its
diff --git a/Documentation/preempt-locking.txt b/Documentation/preempt-locking.txt
index e89ce66..c945062 100644
--- a/Documentation/preempt-locking.txt
+++ b/Documentation/preempt-locking.txt
@@ -1,10 +1,13 @@
- Proper Locking Under a Preemptible Kernel:
- Keeping Kernel Code Preempt-Safe
- Robert Love <rml@tech9.net>
- Last Updated: 28 Aug 2002
+===========================================================================
+Proper Locking Under a Preemptible Kernel: Keeping Kernel Code Preempt-Safe
+===========================================================================
+
+:Author: Robert Love <rml@tech9.net>
+:Last Updated: 28 Aug 2002
-INTRODUCTION
+Introduction
+============
A preemptible kernel creates new locking issues. The issues are the same as
@@ -17,9 +20,10 @@
RULE #1: Per-CPU data structures need explicit protection
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Two similar problems arise. An example code snippet:
+Two similar problems arise. An example code snippet::
struct this_needs_locking tux[NR_CPUS];
tux[smp_processor_id()] = some_value;
@@ -35,6 +39,7 @@
RULE #2: CPU state must be protected.
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Under preemption, the state of the CPU must be protected. This is arch-
@@ -52,6 +57,7 @@
RULE #3: Lock acquire and release must be performed by same task
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
A lock acquired in one task must be released by the same task. This
@@ -61,17 +67,20 @@
have the caller wait on an event by the other task.
-SOLUTION
+Solution
+========
Data protection under preemption is achieved by disabling preemption for the
duration of the critical region.
-preempt_enable() decrement the preempt counter
-preempt_disable() increment the preempt counter
-preempt_enable_no_resched() decrement, but do not immediately preempt
-preempt_check_resched() if needed, reschedule
-preempt_count() return the preempt counter
+::
+
+ preempt_enable() decrement the preempt counter
+ preempt_disable() increment the preempt counter
+ preempt_enable_no_resched() decrement, but do not immediately preempt
+ preempt_check_resched() if needed, reschedule
+ preempt_count() return the preempt counter
The functions are nestable. In other words, you can call preempt_disable
n-times in a code path, and preemption will not be reenabled until the n-th
@@ -89,7 +98,7 @@
affected codepath does not do any of this. Best policy is to use this only for
small, atomic code that you wrote and which calls no complex functions.
-Example:
+Example::
cpucache_t *cc; /* this is per-CPU */
preempt_disable();
@@ -102,7 +111,7 @@
return 0;
Notice how the preemption statements must encompass every reference of the
-critical variables. Another example:
+critical variables. Another example::
int buf[NR_CPUS];
set_cpu_val(buf);
@@ -114,7 +123,8 @@
moving the spin_lock up two lines.
-PREVENTING PREEMPTION USING INTERRUPT DISABLING
+Preventing preemption using interrupt disabling
+===============================================
It is possible to prevent a preemption event using local_irq_disable and
diff --git a/Documentation/printk-formats.txt b/Documentation/printk-formats.txt
index 619cdff..65ea591 100644
--- a/Documentation/printk-formats.txt
+++ b/Documentation/printk-formats.txt
@@ -1,5 +1,18 @@
-If variable is of Type, use printk format specifier:
----------------------------------------------------------
+=========================================
+How to get printk format specifiers right
+=========================================
+
+:Author: Randy Dunlap <rdunlap@infradead.org>
+:Author: Andrew Murray <amurray@mpc-data.co.uk>
+
+
+Integer types
+=============
+
+::
+
+ If variable is of Type, use printk format specifier:
+ ------------------------------------------------------------
int %d or %x
unsigned int %u or %x
long %ld or %lx
@@ -13,25 +26,29 @@
s64 %lld or %llx
u64 %llu or %llx
-If <type> is dependent on a config option for its size (e.g., sector_t,
-blkcnt_t) or is architecture-dependent for its size (e.g., tcflag_t), use a
-format specifier of its largest possible type and explicitly cast to it.
-Example:
+If <type> is dependent on a config option for its size (e.g., ``sector_t``,
+``blkcnt_t``) or is architecture-dependent for its size (e.g., ``tcflag_t``),
+use a format specifier of its largest possible type and explicitly cast to it.
+
+Example::
printk("test: sector number/total blocks: %llu/%llu\n",
(unsigned long long)sector, (unsigned long long)blockcount);
-Reminder: sizeof() result is of type size_t.
+Reminder: ``sizeof()`` result is of type ``size_t``.
-The kernel's printf does not support %n. For obvious reasons, floating
-point formats (%e, %f, %g, %a) are also not recognized. Use of any
+The kernel's printf does not support ``%n``. For obvious reasons, floating
+point formats (``%e, %f, %g, %a``) are also not recognized. Use of any
unsupported specifier or length qualifier results in a WARN and early
return from vsnprintf.
Raw pointer value SHOULD be printed with %p. The kernel supports
the following extended format specifiers for pointer types:
-Symbols/Function Pointers:
+Symbols/Function Pointers
+=========================
+
+::
%pF versatile_init+0x0/0x110
%pf versatile_init
@@ -41,99 +58,122 @@
%ps versatile_init
%pB prev_fn_of_versatile_init+0x88/0x88
- For printing symbols and function pointers. The 'S' and 's' specifiers
- result in the symbol name with ('S') or without ('s') offsets. Where
- this is used on a kernel without KALLSYMS - the symbol address is
- printed instead.
+For printing symbols and function pointers. The ``S`` and ``s`` specifiers
+result in the symbol name with (``S``) or without (``s``) offsets. Where
+this is used on a kernel without KALLSYMS - the symbol address is
+printed instead.
- The 'B' specifier results in the symbol name with offsets and should be
- used when printing stack backtraces. The specifier takes into
- consideration the effect of compiler optimisations which may occur
- when tail-call's are used and marked with the noreturn GCC attribute.
+The ``B`` specifier results in the symbol name with offsets and should be
+used when printing stack backtraces. The specifier takes into
+consideration the effect of compiler optimisations which may occur
+when tail-call``s are used and marked with the noreturn GCC attribute.
- On ia64, ppc64 and parisc64 architectures function pointers are
- actually function descriptors which must first be resolved. The 'F' and
- 'f' specifiers perform this resolution and then provide the same
- functionality as the 'S' and 's' specifiers.
+On ia64, ppc64 and parisc64 architectures function pointers are
+actually function descriptors which must first be resolved. The ``F`` and
+``f`` specifiers perform this resolution and then provide the same
+functionality as the ``S`` and ``s`` specifiers.
-Kernel Pointers:
+Kernel Pointers
+===============
+
+::
%pK 0x01234567 or 0x0123456789abcdef
- For printing kernel pointers which should be hidden from unprivileged
- users. The behaviour of %pK depends on the kptr_restrict sysctl - see
- Documentation/sysctl/kernel.txt for more details.
+For printing kernel pointers which should be hidden from unprivileged
+users. The behaviour of ``%pK`` depends on the ``kptr_restrict sysctl`` - see
+Documentation/sysctl/kernel.txt for more details.
-Struct Resources:
+Struct Resources
+================
+
+::
%pr [mem 0x60000000-0x6fffffff flags 0x2200] or
[mem 0x0000000060000000-0x000000006fffffff flags 0x2200]
%pR [mem 0x60000000-0x6fffffff pref] or
[mem 0x0000000060000000-0x000000006fffffff pref]
- For printing struct resources. The 'R' and 'r' specifiers result in a
- printed resource with ('R') or without ('r') a decoded flags member.
- Passed by reference.
+For printing struct resources. The ``R`` and ``r`` specifiers result in a
+printed resource with (``R``) or without (``r``) a decoded flags member.
+Passed by reference.
-Physical addresses types phys_addr_t:
+Physical addresses types ``phys_addr_t``
+========================================
+
+::
%pa[p] 0x01234567 or 0x0123456789abcdef
- For printing a phys_addr_t type (and its derivatives, such as
- resource_size_t) which can vary based on build options, regardless of
- the width of the CPU data path. Passed by reference.
+For printing a ``phys_addr_t`` type (and its derivatives, such as
+``resource_size_t``) which can vary based on build options, regardless of
+the width of the CPU data path. Passed by reference.
-DMA addresses types dma_addr_t:
+DMA addresses types ``dma_addr_t``
+==================================
+
+::
%pad 0x01234567 or 0x0123456789abcdef
- For printing a dma_addr_t type which can vary based on build options,
- regardless of the width of the CPU data path. Passed by reference.
+For printing a ``dma_addr_t`` type which can vary based on build options,
+regardless of the width of the CPU data path. Passed by reference.
-Raw buffer as an escaped string:
+Raw buffer as an escaped string
+===============================
+
+::
%*pE[achnops]
- For printing raw buffer as an escaped string. For the following buffer
+For printing raw buffer as an escaped string. For the following buffer::
1b 62 20 5c 43 07 22 90 0d 5d
- few examples show how the conversion would be done (the result string
- without surrounding quotes):
+few examples show how the conversion would be done (the result string
+without surrounding quotes)::
%*pE "\eb \C\a"\220\r]"
%*pEhp "\x1bb \C\x07"\x90\x0d]"
%*pEa "\e\142\040\\\103\a\042\220\r\135"
- The conversion rules are applied according to an optional combination
- of flags (see string_escape_mem() kernel documentation for the
- details):
- a - ESCAPE_ANY
- c - ESCAPE_SPECIAL
- h - ESCAPE_HEX
- n - ESCAPE_NULL
- o - ESCAPE_OCTAL
- p - ESCAPE_NP
- s - ESCAPE_SPACE
- By default ESCAPE_ANY_NP is used.
+The conversion rules are applied according to an optional combination
+of flags (see :c:func:`string_escape_mem` kernel documentation for the
+details):
- ESCAPE_ANY_NP is the sane choice for many cases, in particularly for
- printing SSIDs.
+ - ``a`` - ESCAPE_ANY
+ - ``c`` - ESCAPE_SPECIAL
+ - ``h`` - ESCAPE_HEX
+ - ``n`` - ESCAPE_NULL
+ - ``o`` - ESCAPE_OCTAL
+ - ``p`` - ESCAPE_NP
+ - ``s`` - ESCAPE_SPACE
- If field width is omitted the 1 byte only will be escaped.
+By default ESCAPE_ANY_NP is used.
-Raw buffer as a hex string:
+ESCAPE_ANY_NP is the sane choice for many cases, in particularly for
+printing SSIDs.
+
+If field width is omitted the 1 byte only will be escaped.
+
+Raw buffer as a hex string
+==========================
+
+::
%*ph 00 01 02 ... 3f
%*phC 00:01:02: ... :3f
%*phD 00-01-02- ... -3f
%*phN 000102 ... 3f
- For printing a small buffers (up to 64 bytes long) as a hex string with
- certain separator. For the larger buffers consider to use
- print_hex_dump().
+For printing a small buffers (up to 64 bytes long) as a hex string with
+certain separator. For the larger buffers consider to use
+:c:func:`print_hex_dump`.
-MAC/FDDI addresses:
+MAC/FDDI addresses
+==================
+
+::
%pM 00:01:02:03:04:05
%pMR 05:04:03:02:01:00
@@ -141,53 +181,62 @@
%pm 000102030405
%pmR 050403020100
- For printing 6-byte MAC/FDDI addresses in hex notation. The 'M' and 'm'
- specifiers result in a printed address with ('M') or without ('m') byte
- separators. The default byte separator is the colon (':').
+For printing 6-byte MAC/FDDI addresses in hex notation. The ``M`` and ``m``
+specifiers result in a printed address with (``M``) or without (``m``) byte
+separators. The default byte separator is the colon (``:``).
- Where FDDI addresses are concerned the 'F' specifier can be used after
- the 'M' specifier to use dash ('-') separators instead of the default
- separator.
+Where FDDI addresses are concerned the ``F`` specifier can be used after
+the ``M`` specifier to use dash (``-``) separators instead of the default
+separator.
- For Bluetooth addresses the 'R' specifier shall be used after the 'M'
- specifier to use reversed byte order suitable for visual interpretation
- of Bluetooth addresses which are in the little endian order.
+For Bluetooth addresses the ``R`` specifier shall be used after the ``M``
+specifier to use reversed byte order suitable for visual interpretation
+of Bluetooth addresses which are in the little endian order.
- Passed by reference.
+Passed by reference.
-IPv4 addresses:
+IPv4 addresses
+==============
+
+::
%pI4 1.2.3.4
%pi4 001.002.003.004
%p[Ii]4[hnbl]
- For printing IPv4 dot-separated decimal addresses. The 'I4' and 'i4'
- specifiers result in a printed address with ('i4') or without ('I4')
- leading zeros.
+For printing IPv4 dot-separated decimal addresses. The ``I4`` and ``i4``
+specifiers result in a printed address with (``i4``) or without (``I4``)
+leading zeros.
- The additional 'h', 'n', 'b', and 'l' specifiers are used to specify
- host, network, big or little endian order addresses respectively. Where
- no specifier is provided the default network/big endian order is used.
+The additional ``h``, ``n``, ``b``, and ``l`` specifiers are used to specify
+host, network, big or little endian order addresses respectively. Where
+no specifier is provided the default network/big endian order is used.
- Passed by reference.
+Passed by reference.
-IPv6 addresses:
+IPv6 addresses
+==============
+
+::
%pI6 0001:0002:0003:0004:0005:0006:0007:0008
%pi6 00010002000300040005000600070008
%pI6c 1:2:3:4:5:6:7:8
- For printing IPv6 network-order 16-bit hex addresses. The 'I6' and 'i6'
- specifiers result in a printed address with ('I6') or without ('i6')
- colon-separators. Leading zeros are always used.
+For printing IPv6 network-order 16-bit hex addresses. The ``I6`` and ``i6``
+specifiers result in a printed address with (``I6``) or without (``i6``)
+colon-separators. Leading zeros are always used.
- The additional 'c' specifier can be used with the 'I' specifier to
- print a compressed IPv6 address as described by
- http://tools.ietf.org/html/rfc5952
+The additional ``c`` specifier can be used with the ``I`` specifier to
+print a compressed IPv6 address as described by
+http://tools.ietf.org/html/rfc5952
- Passed by reference.
+Passed by reference.
-IPv4/IPv6 addresses (generic, with port, flowinfo, scope):
+IPv4/IPv6 addresses (generic, with port, flowinfo, scope)
+=========================================================
+
+::
%pIS 1.2.3.4 or 0001:0002:0003:0004:0005:0006:0007:0008
%piS 001.002.003.004 or 00010002000300040005000600070008
@@ -195,87 +244,103 @@
%pISpc 1.2.3.4:12345 or [1:2:3:4:5:6:7:8]:12345
%p[Ii]S[pfschnbl]
- For printing an IP address without the need to distinguish whether it's
- of type AF_INET or AF_INET6, a pointer to a valid 'struct sockaddr',
- specified through 'IS' or 'iS', can be passed to this format specifier.
+For printing an IP address without the need to distinguish whether it``s
+of type AF_INET or AF_INET6, a pointer to a valid ``struct sockaddr``,
+specified through ``IS`` or ``iS``, can be passed to this format specifier.
- The additional 'p', 'f', and 's' specifiers are used to specify port
- (IPv4, IPv6), flowinfo (IPv6) and scope (IPv6). Ports have a ':' prefix,
- flowinfo a '/' and scope a '%', each followed by the actual value.
+The additional ``p``, ``f``, and ``s`` specifiers are used to specify port
+(IPv4, IPv6), flowinfo (IPv6) and scope (IPv6). Ports have a ``:`` prefix,
+flowinfo a ``/`` and scope a ``%``, each followed by the actual value.
- In case of an IPv6 address the compressed IPv6 address as described by
- http://tools.ietf.org/html/rfc5952 is being used if the additional
- specifier 'c' is given. The IPv6 address is surrounded by '[', ']' in
- case of additional specifiers 'p', 'f' or 's' as suggested by
- https://tools.ietf.org/html/draft-ietf-6man-text-addr-representation-07
+In case of an IPv6 address the compressed IPv6 address as described by
+http://tools.ietf.org/html/rfc5952 is being used if the additional
+specifier ``c`` is given. The IPv6 address is surrounded by ``[``, ``]`` in
+case of additional specifiers ``p``, ``f`` or ``s`` as suggested by
+https://tools.ietf.org/html/draft-ietf-6man-text-addr-representation-07
- In case of IPv4 addresses, the additional 'h', 'n', 'b', and 'l'
- specifiers can be used as well and are ignored in case of an IPv6
- address.
+In case of IPv4 addresses, the additional ``h``, ``n``, ``b``, and ``l``
+specifiers can be used as well and are ignored in case of an IPv6
+address.
- Passed by reference.
+Passed by reference.
- Further examples:
+Further examples::
%pISfc 1.2.3.4 or [1:2:3:4:5:6:7:8]/123456789
%pISsc 1.2.3.4 or [1:2:3:4:5:6:7:8]%1234567890
%pISpfc 1.2.3.4:12345 or [1:2:3:4:5:6:7:8]:12345/123456789
-UUID/GUID addresses:
+UUID/GUID addresses
+===================
+
+::
%pUb 00010203-0405-0607-0809-0a0b0c0d0e0f
%pUB 00010203-0405-0607-0809-0A0B0C0D0E0F
%pUl 03020100-0504-0706-0809-0a0b0c0e0e0f
%pUL 03020100-0504-0706-0809-0A0B0C0E0E0F
- For printing 16-byte UUID/GUIDs addresses. The additional 'l', 'L',
- 'b' and 'B' specifiers are used to specify a little endian order in
- lower ('l') or upper case ('L') hex characters - and big endian order
- in lower ('b') or upper case ('B') hex characters.
+For printing 16-byte UUID/GUIDs addresses. The additional 'l', 'L',
+'b' and 'B' specifiers are used to specify a little endian order in
+lower ('l') or upper case ('L') hex characters - and big endian order
+in lower ('b') or upper case ('B') hex characters.
- Where no additional specifiers are used the default big endian
- order with lower case hex characters will be printed.
+Where no additional specifiers are used the default big endian
+order with lower case hex characters will be printed.
- Passed by reference.
+Passed by reference.
-dentry names:
+dentry names
+============
+
+::
%pd{,2,3,4}
%pD{,2,3,4}
- For printing dentry name; if we race with d_move(), the name might be
- a mix of old and new ones, but it won't oops. %pd dentry is a safer
- equivalent of %s dentry->d_name.name we used to use, %pd<n> prints
- n last components. %pD does the same thing for struct file.
+For printing dentry name; if we race with :c:func:`d_move`, the name might be
+a mix of old and new ones, but it won't oops. ``%pd`` dentry is a safer
+equivalent of ``%s`` ``dentry->d_name.name`` we used to use, ``%pd<n>`` prints
+``n`` last components. ``%pD`` does the same thing for struct file.
- Passed by reference.
+Passed by reference.
-block_device names:
+block_device names
+==================
+
+::
%pg sda, sda1 or loop0p1
- For printing name of block_device pointers.
+For printing name of block_device pointers.
-struct va_format:
+struct va_format
+================
+
+::
%pV
- For printing struct va_format structures. These contain a format string
- and va_list as follows:
+For printing struct va_format structures. These contain a format string
+and va_list as follows::
struct va_format {
const char *fmt;
va_list *va;
};
- Implements a "recursive vsnprintf".
+Implements a "recursive vsnprintf".
- Do not use this feature without some mechanism to verify the
- correctness of the format string and va_list arguments.
+Do not use this feature without some mechanism to verify the
+correctness of the format string and va_list arguments.
- Passed by reference.
+Passed by reference.
-kobjects:
+kobjects
+========
+
+::
+
%pO
Base specifier for kobject based structs. Must be followed with
@@ -311,61 +376,70 @@
Passed by reference.
-struct clk:
+
+struct clk
+==========
+
+::
%pC pll1
%pCn pll1
%pCr 1560000000
- For printing struct clk structures. '%pC' and '%pCn' print the name
- (Common Clock Framework) or address (legacy clock framework) of the
- structure; '%pCr' prints the current clock rate.
+For printing struct clk structures. ``%pC`` and ``%pCn`` print the name
+(Common Clock Framework) or address (legacy clock framework) of the
+structure; ``%pCr`` prints the current clock rate.
- Passed by reference.
+Passed by reference.
-bitmap and its derivatives such as cpumask and nodemask:
+bitmap and its derivatives such as cpumask and nodemask
+=======================================================
+
+::
%*pb 0779
%*pbl 0,3-6,8-10
- For printing bitmap and its derivatives such as cpumask and nodemask,
- %*pb output the bitmap with field width as the number of bits and %*pbl
- output the bitmap as range list with field width as the number of bits.
+For printing bitmap and its derivatives such as cpumask and nodemask,
+``%*pb`` output the bitmap with field width as the number of bits and ``%*pbl``
+output the bitmap as range list with field width as the number of bits.
- Passed by reference.
+Passed by reference.
-Flags bitfields such as page flags, gfp_flags:
+Flags bitfields such as page flags, gfp_flags
+=============================================
+
+::
%pGp referenced|uptodate|lru|active|private
%pGg GFP_USER|GFP_DMA32|GFP_NOWARN
%pGv read|exec|mayread|maywrite|mayexec|denywrite
- For printing flags bitfields as a collection of symbolic constants that
- would construct the value. The type of flags is given by the third
- character. Currently supported are [p]age flags, [v]ma_flags (both
- expect unsigned long *) and [g]fp_flags (expects gfp_t *). The flag
- names and print order depends on the particular type.
+For printing flags bitfields as a collection of symbolic constants that
+would construct the value. The type of flags is given by the third
+character. Currently supported are [p]age flags, [v]ma_flags (both
+expect ``unsigned long *``) and [g]fp_flags (expects ``gfp_t *``). The flag
+names and print order depends on the particular type.
- Note that this format should not be used directly in TP_printk() part
- of a tracepoint. Instead, use the show_*_flags() functions from
- <trace/events/mmflags.h>.
+Note that this format should not be used directly in :c:func:`TP_printk()` part
+of a tracepoint. Instead, use the ``show_*_flags()`` functions from
+<trace/events/mmflags.h>.
- Passed by reference.
+Passed by reference.
-Network device features:
+Network device features
+=======================
+
+::
%pNF 0x000000000000c000
- For printing netdev_features_t.
+For printing netdev_features_t.
- Passed by reference.
+Passed by reference.
-If you add other %p extensions, please extend lib/test_printf.c with
+If you add other ``%p`` extensions, please extend lib/test_printf.c with
one or more test cases, if at all feasible.
Thank you for your cooperation and attention.
-
-
-By Randy Dunlap <rdunlap@infradead.org> and
-Andrew Murray <amurray@mpc-data.co.uk>
diff --git a/Documentation/pwm.txt b/Documentation/pwm.txt
index 789b27c..8fbf0aa 100644
--- a/Documentation/pwm.txt
+++ b/Documentation/pwm.txt
@@ -1,4 +1,6 @@
+======================================
Pulse Width Modulation (PWM) interface
+======================================
This provides an overview about the Linux PWM interface
@@ -16,7 +18,7 @@
Instead of referring to a PWM device via its unique ID, board setup code
should instead register a static mapping that can be used to match PWM
-consumers to providers, as given in the following example:
+consumers to providers, as given in the following example::
static struct pwm_lookup board_pwm_lookup[] = {
PWM_LOOKUP("tegra-pwm", 0, "pwm-backlight", NULL,
@@ -40,9 +42,9 @@
device or a consumer name. pwm_put() is used to free the PWM device. Managed
variants of these functions, devm_pwm_get() and devm_pwm_put(), also exist.
-After being requested, a PWM has to be configured using:
+After being requested, a PWM has to be configured using::
-int pwm_apply_state(struct pwm_device *pwm, struct pwm_state *state);
+ int pwm_apply_state(struct pwm_device *pwm, struct pwm_state *state);
This API controls both the PWM period/duty_cycle config and the
enable/disable state.
@@ -72,11 +74,14 @@
pwmchipN, where N is the base of the PWM chip. Inside the directory you
will find:
-npwm - The number of PWM channels this chip supports (read-only).
+ npwm
+ The number of PWM channels this chip supports (read-only).
-export - Exports a PWM channel for use with sysfs (write-only).
+ export
+ Exports a PWM channel for use with sysfs (write-only).
-unexport - Unexports a PWM channel from sysfs (write-only).
+ unexport
+ Unexports a PWM channel from sysfs (write-only).
The PWM channels are numbered using a per-chip index from 0 to npwm-1.
@@ -84,21 +89,26 @@
pwmchipN directory it is associated with, where X is the number of the
channel that was exported. The following properties will then be available:
-period - The total period of the PWM signal (read/write).
- Value is in nanoseconds and is the sum of the active and inactive
- time of the PWM.
+ period
+ The total period of the PWM signal (read/write).
+ Value is in nanoseconds and is the sum of the active and inactive
+ time of the PWM.
-duty_cycle - The active time of the PWM signal (read/write).
- Value is in nanoseconds and must be less than the period.
+ duty_cycle
+ The active time of the PWM signal (read/write).
+ Value is in nanoseconds and must be less than the period.
-polarity - Changes the polarity of the PWM signal (read/write).
- Writes to this property only work if the PWM chip supports changing
- the polarity. The polarity can only be changed if the PWM is not
- enabled. Value is the string "normal" or "inversed".
+ polarity
+ Changes the polarity of the PWM signal (read/write).
+ Writes to this property only work if the PWM chip supports changing
+ the polarity. The polarity can only be changed if the PWM is not
+ enabled. Value is the string "normal" or "inversed".
-enable - Enable/disable the PWM signal (read/write).
- 0 - disabled
- 1 - enabled
+ enable
+ Enable/disable the PWM signal (read/write).
+
+ - 0 - disabled
+ - 1 - enabled
Implementing a PWM driver
-------------------------
diff --git a/Documentation/rbtree.txt b/Documentation/rbtree.txt
index b9d9cc5..b8a8c70 100644
--- a/Documentation/rbtree.txt
+++ b/Documentation/rbtree.txt
@@ -1,7 +1,10 @@
+=================================
Red-black Trees (rbtree) in Linux
-January 18, 2007
-Rob Landley <rob@landley.net>
-=============================
+=================================
+
+
+:Date: January 18, 2007
+:Author: Rob Landley <rob@landley.net>
What are red-black trees, and what are they for?
------------------------------------------------
@@ -56,7 +59,7 @@
Creating a new rbtree
---------------------
-Data nodes in an rbtree tree are structures containing a struct rb_node member:
+Data nodes in an rbtree tree are structures containing a struct rb_node member::
struct mytype {
struct rb_node node;
@@ -78,7 +81,7 @@
Writing a search function for your tree is fairly straightforward: start at the
root, compare each value, and follow the left or right branch as necessary.
-Example:
+Example::
struct mytype *my_search(struct rb_root *root, char *string)
{
@@ -110,7 +113,7 @@
location of the pointer on which to graft the new node. The new node also
needs a link to its parent node for rebalancing purposes.
-Example:
+Example::
int my_insert(struct rb_root *root, struct mytype *data)
{
@@ -140,11 +143,11 @@
Removing or replacing existing data in an rbtree
------------------------------------------------
-To remove an existing node from a tree, call:
+To remove an existing node from a tree, call::
void rb_erase(struct rb_node *victim, struct rb_root *tree);
-Example:
+Example::
struct mytype *data = mysearch(&mytree, "walrus");
@@ -153,7 +156,7 @@
myfree(data);
}
-To replace an existing node in a tree with a new one with the same key, call:
+To replace an existing node in a tree with a new one with the same key, call::
void rb_replace_node(struct rb_node *old, struct rb_node *new,
struct rb_root *tree);
@@ -166,7 +169,7 @@
Four functions are provided for iterating through an rbtree's contents in
sorted order. These work on arbitrary trees, and should not need to be
-modified or wrapped (except for locking purposes):
+modified or wrapped (except for locking purposes)::
struct rb_node *rb_first(struct rb_root *tree);
struct rb_node *rb_last(struct rb_root *tree);
@@ -184,7 +187,7 @@
macro, and individual members may be accessed directly via
rb_entry(node, type, member).
-Example:
+Example::
struct rb_node *node;
for (node = rb_first(&mytree); node; node = rb_next(node))
@@ -241,7 +244,8 @@
compiled code size.
-Sample usage:
+Sample usage
+^^^^^^^^^^^^
Interval tree is an example of augmented rb tree. Reference -
"Introduction to Algorithms" by Cormen, Leiserson, Rivest and Stein.
@@ -259,12 +263,12 @@
information can be maintained at each node just be looking at the node
and its immediate children. And this will be used in O(log n) lookup
for lowest match (lowest start address among all possible matches)
-with something like:
+with something like::
-struct interval_tree_node *
-interval_tree_first_match(struct rb_root *root,
- unsigned long start, unsigned long last)
-{
+ struct interval_tree_node *
+ interval_tree_first_match(struct rb_root *root,
+ unsigned long start, unsigned long last)
+ {
struct interval_tree_node *node;
if (!root->rb_node)
@@ -301,13 +305,13 @@
}
return NULL; /* No match */
}
-}
+ }
-Insertion/removal are defined using the following augmented callbacks:
+Insertion/removal are defined using the following augmented callbacks::
-static inline unsigned long
-compute_subtree_last(struct interval_tree_node *node)
-{
+ static inline unsigned long
+ compute_subtree_last(struct interval_tree_node *node)
+ {
unsigned long max = node->last, subtree_last;
if (node->rb.rb_left) {
subtree_last = rb_entry(node->rb.rb_left,
@@ -322,10 +326,10 @@
max = subtree_last;
}
return max;
-}
+ }
-static void augment_propagate(struct rb_node *rb, struct rb_node *stop)
-{
+ static void augment_propagate(struct rb_node *rb, struct rb_node *stop)
+ {
while (rb != stop) {
struct interval_tree_node *node =
rb_entry(rb, struct interval_tree_node, rb);
@@ -335,20 +339,20 @@
node->__subtree_last = subtree_last;
rb = rb_parent(&node->rb);
}
-}
+ }
-static void augment_copy(struct rb_node *rb_old, struct rb_node *rb_new)
-{
+ static void augment_copy(struct rb_node *rb_old, struct rb_node *rb_new)
+ {
struct interval_tree_node *old =
rb_entry(rb_old, struct interval_tree_node, rb);
struct interval_tree_node *new =
rb_entry(rb_new, struct interval_tree_node, rb);
new->__subtree_last = old->__subtree_last;
-}
+ }
-static void augment_rotate(struct rb_node *rb_old, struct rb_node *rb_new)
-{
+ static void augment_rotate(struct rb_node *rb_old, struct rb_node *rb_new)
+ {
struct interval_tree_node *old =
rb_entry(rb_old, struct interval_tree_node, rb);
struct interval_tree_node *new =
@@ -356,15 +360,15 @@
new->__subtree_last = old->__subtree_last;
old->__subtree_last = compute_subtree_last(old);
-}
+ }
-static const struct rb_augment_callbacks augment_callbacks = {
+ static const struct rb_augment_callbacks augment_callbacks = {
augment_propagate, augment_copy, augment_rotate
-};
+ };
-void interval_tree_insert(struct interval_tree_node *node,
- struct rb_root *root)
-{
+ void interval_tree_insert(struct interval_tree_node *node,
+ struct rb_root *root)
+ {
struct rb_node **link = &root->rb_node, *rb_parent = NULL;
unsigned long start = node->start, last = node->last;
struct interval_tree_node *parent;
@@ -383,10 +387,10 @@
node->__subtree_last = last;
rb_link_node(&node->rb, rb_parent, link);
rb_insert_augmented(&node->rb, root, &augment_callbacks);
-}
+ }
-void interval_tree_remove(struct interval_tree_node *node,
- struct rb_root *root)
-{
+ void interval_tree_remove(struct interval_tree_node *node,
+ struct rb_root *root)
+ {
rb_erase_augmented(&node->rb, root, &augment_callbacks);
-}
+ }
diff --git a/Documentation/remoteproc.txt b/Documentation/remoteproc.txt
index f075974..77fb03a 100644
--- a/Documentation/remoteproc.txt
+++ b/Documentation/remoteproc.txt
@@ -1,6 +1,9 @@
+==========================
Remote Processor Framework
+==========================
-1. Introduction
+Introduction
+============
Modern SoCs typically have heterogeneous remote processor devices in asymmetric
multiprocessing (AMP) configurations, which may be running different instances
@@ -26,44 +29,62 @@
existing virtio drivers with remote processor backends at a minimal development
cost.
-2. User API
+User API
+========
+
+::
int rproc_boot(struct rproc *rproc)
- - Boot a remote processor (i.e. load its firmware, power it on, ...).
- If the remote processor is already powered on, this function immediately
- returns (successfully).
- Returns 0 on success, and an appropriate error value otherwise.
- Note: to use this function you should already have a valid rproc
- handle. There are several ways to achieve that cleanly (devres, pdata,
- the way remoteproc_rpmsg.c does this, or, if this becomes prevalent, we
- might also consider using dev_archdata for this).
+
+Boot a remote processor (i.e. load its firmware, power it on, ...).
+
+If the remote processor is already powered on, this function immediately
+returns (successfully).
+
+Returns 0 on success, and an appropriate error value otherwise.
+Note: to use this function you should already have a valid rproc
+handle. There are several ways to achieve that cleanly (devres, pdata,
+the way remoteproc_rpmsg.c does this, or, if this becomes prevalent, we
+might also consider using dev_archdata for this).
+
+::
void rproc_shutdown(struct rproc *rproc)
- - Power off a remote processor (previously booted with rproc_boot()).
- In case @rproc is still being used by an additional user(s), then
- this function will just decrement the power refcount and exit,
- without really powering off the device.
- Every call to rproc_boot() must (eventually) be accompanied by a call
- to rproc_shutdown(). Calling rproc_shutdown() redundantly is a bug.
- Notes:
- - we're not decrementing the rproc's refcount, only the power refcount.
- which means that the @rproc handle stays valid even after
- rproc_shutdown() returns, and users can still use it with a subsequent
- rproc_boot(), if needed.
+
+Power off a remote processor (previously booted with rproc_boot()).
+In case @rproc is still being used by an additional user(s), then
+this function will just decrement the power refcount and exit,
+without really powering off the device.
+
+Every call to rproc_boot() must (eventually) be accompanied by a call
+to rproc_shutdown(). Calling rproc_shutdown() redundantly is a bug.
+
+.. note::
+
+ we're not decrementing the rproc's refcount, only the power refcount.
+ which means that the @rproc handle stays valid even after
+ rproc_shutdown() returns, and users can still use it with a subsequent
+ rproc_boot(), if needed.
+
+::
struct rproc *rproc_get_by_phandle(phandle phandle)
- - Find an rproc handle using a device tree phandle. Returns the rproc
- handle on success, and NULL on failure. This function increments
- the remote processor's refcount, so always use rproc_put() to
- decrement it back once rproc isn't needed anymore.
-3. Typical usage
+Find an rproc handle using a device tree phandle. Returns the rproc
+handle on success, and NULL on failure. This function increments
+the remote processor's refcount, so always use rproc_put() to
+decrement it back once rproc isn't needed anymore.
-#include <linux/remoteproc.h>
+Typical usage
+=============
-/* in case we were given a valid 'rproc' handle */
-int dummy_rproc_example(struct rproc *my_rproc)
-{
+::
+
+ #include <linux/remoteproc.h>
+
+ /* in case we were given a valid 'rproc' handle */
+ int dummy_rproc_example(struct rproc *my_rproc)
+ {
int ret;
/* let's power on and boot our remote processor */
@@ -80,84 +101,111 @@
/* let's shut it down now */
rproc_shutdown(my_rproc);
-}
+ }
-4. API for implementors
+API for implementors
+====================
+
+::
struct rproc *rproc_alloc(struct device *dev, const char *name,
const struct rproc_ops *ops,
const char *firmware, int len)
- - Allocate a new remote processor handle, but don't register
- it yet. Required parameters are the underlying device, the
- name of this remote processor, platform-specific ops handlers,
- the name of the firmware to boot this rproc with, and the
- length of private data needed by the allocating rproc driver (in bytes).
- This function should be used by rproc implementations during
- initialization of the remote processor.
- After creating an rproc handle using this function, and when ready,
- implementations should then call rproc_add() to complete
- the registration of the remote processor.
- On success, the new rproc is returned, and on failure, NULL.
+Allocate a new remote processor handle, but don't register
+it yet. Required parameters are the underlying device, the
+name of this remote processor, platform-specific ops handlers,
+the name of the firmware to boot this rproc with, and the
+length of private data needed by the allocating rproc driver (in bytes).
- Note: _never_ directly deallocate @rproc, even if it was not registered
- yet. Instead, when you need to unroll rproc_alloc(), use rproc_free().
+This function should be used by rproc implementations during
+initialization of the remote processor.
+
+After creating an rproc handle using this function, and when ready,
+implementations should then call rproc_add() to complete
+the registration of the remote processor.
+
+On success, the new rproc is returned, and on failure, NULL.
+
+.. note::
+
+ **never** directly deallocate @rproc, even if it was not registered
+ yet. Instead, when you need to unroll rproc_alloc(), use rproc_free().
+
+::
void rproc_free(struct rproc *rproc)
- - Free an rproc handle that was allocated by rproc_alloc.
- This function essentially unrolls rproc_alloc(), by decrementing the
- rproc's refcount. It doesn't directly free rproc; that would happen
- only if there are no other references to rproc and its refcount now
- dropped to zero.
+
+Free an rproc handle that was allocated by rproc_alloc.
+
+This function essentially unrolls rproc_alloc(), by decrementing the
+rproc's refcount. It doesn't directly free rproc; that would happen
+only if there are no other references to rproc and its refcount now
+dropped to zero.
+
+::
int rproc_add(struct rproc *rproc)
- - Register @rproc with the remoteproc framework, after it has been
- allocated with rproc_alloc().
- This is called by the platform-specific rproc implementation, whenever
- a new remote processor device is probed.
- Returns 0 on success and an appropriate error code otherwise.
- Note: this function initiates an asynchronous firmware loading
- context, which will look for virtio devices supported by the rproc's
- firmware.
- If found, those virtio devices will be created and added, so as a result
- of registering this remote processor, additional virtio drivers might get
- probed.
+
+Register @rproc with the remoteproc framework, after it has been
+allocated with rproc_alloc().
+
+This is called by the platform-specific rproc implementation, whenever
+a new remote processor device is probed.
+
+Returns 0 on success and an appropriate error code otherwise.
+Note: this function initiates an asynchronous firmware loading
+context, which will look for virtio devices supported by the rproc's
+firmware.
+
+If found, those virtio devices will be created and added, so as a result
+of registering this remote processor, additional virtio drivers might get
+probed.
+
+::
int rproc_del(struct rproc *rproc)
- - Unroll rproc_add().
- This function should be called when the platform specific rproc
- implementation decides to remove the rproc device. it should
- _only_ be called if a previous invocation of rproc_add()
- has completed successfully.
- After rproc_del() returns, @rproc is still valid, and its
- last refcount should be decremented by calling rproc_free().
+Unroll rproc_add().
- Returns 0 on success and -EINVAL if @rproc isn't valid.
+This function should be called when the platform specific rproc
+implementation decides to remove the rproc device. it should
+_only_ be called if a previous invocation of rproc_add()
+has completed successfully.
+
+After rproc_del() returns, @rproc is still valid, and its
+last refcount should be decremented by calling rproc_free().
+
+Returns 0 on success and -EINVAL if @rproc isn't valid.
+
+::
void rproc_report_crash(struct rproc *rproc, enum rproc_crash_type type)
- - Report a crash in a remoteproc
- This function must be called every time a crash is detected by the
- platform specific rproc implementation. This should not be called from a
- non-remoteproc driver. This function can be called from atomic/interrupt
- context.
-5. Implementation callbacks
+Report a crash in a remoteproc
+
+This function must be called every time a crash is detected by the
+platform specific rproc implementation. This should not be called from a
+non-remoteproc driver. This function can be called from atomic/interrupt
+context.
+
+Implementation callbacks
+========================
These callbacks should be provided by platform-specific remoteproc
-drivers:
+drivers::
-/**
- * struct rproc_ops - platform-specific device handlers
- * @start: power on the device and boot it
- * @stop: power off the device
- * @kick: kick a virtqueue (virtqueue id given as a parameter)
- */
-struct rproc_ops {
+ /**
+ * struct rproc_ops - platform-specific device handlers
+ * @start: power on the device and boot it
+ * @stop: power off the device
+ * @kick: kick a virtqueue (virtqueue id given as a parameter)
+ */
+ struct rproc_ops {
int (*start)(struct rproc *rproc);
int (*stop)(struct rproc *rproc);
void (*kick)(struct rproc *rproc, int vqid);
-};
+ };
Every remoteproc implementation should at least provide the ->start and ->stop
handlers. If rpmsg/virtio functionality is also desired, then the ->kick handler
@@ -179,7 +227,8 @@
too expensive) to go through the existing virtqueues and look for new buffers
in the used rings.
-6. Binary Firmware Structure
+Binary Firmware Structure
+=========================
At this point remoteproc only supports ELF32 firmware binaries. However,
it is quite expected that other platforms/devices which we'd want to
@@ -207,43 +256,43 @@
or configurations by the remote processor, such as trace buffers and
supported virtio devices (and their configurations).
-The resource table begins with this header:
+The resource table begins with this header::
-/**
- * struct resource_table - firmware resource table header
- * @ver: version number
- * @num: number of resource entries
- * @reserved: reserved (must be zero)
- * @offset: array of offsets pointing at the various resource entries
- *
- * The header of the resource table, as expressed by this structure,
- * contains a version number (should we need to change this format in the
- * future), the number of available resource entries, and their offsets
- * in the table.
- */
-struct resource_table {
+ /**
+ * struct resource_table - firmware resource table header
+ * @ver: version number
+ * @num: number of resource entries
+ * @reserved: reserved (must be zero)
+ * @offset: array of offsets pointing at the various resource entries
+ *
+ * The header of the resource table, as expressed by this structure,
+ * contains a version number (should we need to change this format in the
+ * future), the number of available resource entries, and their offsets
+ * in the table.
+ */
+ struct resource_table {
u32 ver;
u32 num;
u32 reserved[2];
u32 offset[0];
-} __packed;
+ } __packed;
Immediately following this header are the resource entries themselves,
-each of which begins with the following resource entry header:
+each of which begins with the following resource entry header::
-/**
- * struct fw_rsc_hdr - firmware resource entry header
- * @type: resource type
- * @data: resource data
- *
- * Every resource entry begins with a 'struct fw_rsc_hdr' header providing
- * its @type. The content of the entry itself will immediately follow
- * this header, and it should be parsed according to the resource type.
- */
-struct fw_rsc_hdr {
+ /**
+ * struct fw_rsc_hdr - firmware resource entry header
+ * @type: resource type
+ * @data: resource data
+ *
+ * Every resource entry begins with a 'struct fw_rsc_hdr' header providing
+ * its @type. The content of the entry itself will immediately follow
+ * this header, and it should be parsed according to the resource type.
+ */
+ struct fw_rsc_hdr {
u32 type;
u8 data[0];
-} __packed;
+ } __packed;
Some resources entries are mere announcements, where the host is informed
of specific remoteproc configuration. Other entries require the host to
@@ -252,32 +301,32 @@
the host should provide back its details (e.g. address of an allocated
memory region).
-Here are the various resource types that are currently supported:
+Here are the various resource types that are currently supported::
-/**
- * enum fw_resource_type - types of resource entries
- *
- * @RSC_CARVEOUT: request for allocation of a physically contiguous
- * memory region.
- * @RSC_DEVMEM: request to iommu_map a memory-based peripheral.
- * @RSC_TRACE: announces the availability of a trace buffer into which
- * the remote processor will be writing logs.
- * @RSC_VDEV: declare support for a virtio device, and serve as its
- * virtio header.
- * @RSC_LAST: just keep this one at the end
- *
- * Please note that these values are used as indices to the rproc_handle_rsc
- * lookup table, so please keep them sane. Moreover, @RSC_LAST is used to
- * check the validity of an index before the lookup table is accessed, so
- * please update it as needed.
- */
-enum fw_resource_type {
+ /**
+ * enum fw_resource_type - types of resource entries
+ *
+ * @RSC_CARVEOUT: request for allocation of a physically contiguous
+ * memory region.
+ * @RSC_DEVMEM: request to iommu_map a memory-based peripheral.
+ * @RSC_TRACE: announces the availability of a trace buffer into which
+ * the remote processor will be writing logs.
+ * @RSC_VDEV: declare support for a virtio device, and serve as its
+ * virtio header.
+ * @RSC_LAST: just keep this one at the end
+ *
+ * Please note that these values are used as indices to the rproc_handle_rsc
+ * lookup table, so please keep them sane. Moreover, @RSC_LAST is used to
+ * check the validity of an index before the lookup table is accessed, so
+ * please update it as needed.
+ */
+ enum fw_resource_type {
RSC_CARVEOUT = 0,
RSC_DEVMEM = 1,
RSC_TRACE = 2,
RSC_VDEV = 3,
RSC_LAST = 4,
-};
+ };
For more details regarding a specific resource type, please see its
dedicated structure in include/linux/remoteproc.h.
@@ -286,7 +335,8 @@
at some point. When that happens, we could easily add a new RSC_PLATFORM
type, and hand those resources to the platform-specific rproc driver to handle.
-7. Virtio and remoteproc
+Virtio and remoteproc
+=====================
The firmware should provide remoteproc information about virtio devices
that it supports, and their configurations: a RSC_VDEV resource entry
diff --git a/Documentation/rfkill.txt b/Documentation/rfkill.txt
index 8c17406..a289285 100644
--- a/Documentation/rfkill.txt
+++ b/Documentation/rfkill.txt
@@ -1,13 +1,13 @@
+===============================
rfkill - RF kill switch support
===============================
-1. Introduction
-2. Implementation details
-3. Kernel API
-4. Userspace support
+.. contents::
+ :depth: 2
-1. Introduction
+Introduction
+============
The rfkill subsystem provides a generic interface to disabling any radio
transmitter in the system. When a transmitter is blocked, it shall not
@@ -21,17 +21,24 @@
The rfkill subsystem has a concept of "hard" and "soft" block, which
differ little in their meaning (block == transmitters off) but rather in
whether they can be changed or not:
- - hard block: read-only radio block that cannot be overridden by software
- - soft block: writable radio block (need not be readable) that is set by
- the system software.
+
+ - hard block
+ read-only radio block that cannot be overridden by software
+
+ - soft block
+ writable radio block (need not be readable) that is set by
+ the system software.
The rfkill subsystem has two parameters, rfkill.default_state and
-rfkill.master_switch_mode, which are documented in admin-guide/kernel-parameters.rst.
+rfkill.master_switch_mode, which are documented in
+admin-guide/kernel-parameters.rst.
-2. Implementation details
+Implementation details
+======================
The rfkill subsystem is composed of three main components:
+
* the rfkill core,
* the deprecated rfkill-input module (an input layer handler, being
replaced by userspace policy code) and
@@ -55,7 +62,8 @@
keeps track of soft and hard block separately.
-3. Kernel API
+Kernel API
+==========
Drivers for radio transmitters normally implement an rfkill driver.
@@ -69,7 +77,7 @@
suspend/hibernation, in which case it will be necessary to update the rfkill
core with the current state is at resume time.
-To create an rfkill driver, driver's Kconfig needs to have
+To create an rfkill driver, driver's Kconfig needs to have::
depends on RFKILL || !RFKILL
@@ -87,7 +95,8 @@
according to the switch state (LED_FULL when blocked, LED_OFF otherwise).
-5. Userspace support
+Userspace support
+=================
The recommended userspace interface to use is /dev/rfkill, which is a misc
character device that allows userspace to obtain and set the state of rfkill
@@ -112,11 +121,11 @@
Additionally, each rfkill device is registered in sysfs and emits uevents.
rfkill devices issue uevents (with an action of "change"), with the following
-environment variables set:
+environment variables set::
-RFKILL_NAME
-RFKILL_STATE
-RFKILL_TYPE
+ RFKILL_NAME
+ RFKILL_STATE
+ RFKILL_TYPE
The contents of these variables corresponds to the "name", "state" and
"type" sysfs files explained above.
diff --git a/Documentation/robust-futex-ABI.txt b/Documentation/robust-futex-ABI.txt
index 16eb314..8a5d34a 100644
--- a/Documentation/robust-futex-ABI.txt
+++ b/Documentation/robust-futex-ABI.txt
@@ -1,7 +1,9 @@
-Started by Paul Jackson <pj@sgi.com>
-
+====================
The robust futex ABI
---------------------
+====================
+
+:Author: Started by Paul Jackson <pj@sgi.com>
+
Robust_futexes provide a mechanism that is used in addition to normal
futexes, for kernel assist of cleanup of held locks on task exit.
@@ -32,7 +34,7 @@
waiting on the same locks.
A thread that anticipates possibly using robust_futexes should first
-issue the system call:
+issue the system call::
asmlinkage long
sys_set_robust_list(struct robust_list_head __user *head, size_t len);
@@ -91,7 +93,7 @@
When a thread has invoked the above system call to indicate it
anticipates using robust_futexes, the kernel stores the passed in 'head'
pointer for that task. The task may retrieve that value later on by
-using the system call:
+using the system call::
asmlinkage long
sys_get_robust_list(int pid, struct robust_list_head __user **head_ptr,
@@ -135,6 +137,7 @@
protocol on 'lock entry' insertion and removal:
On insertion:
+
1) set the 'list_op_pending' word to the address of the 'lock entry'
to be inserted,
2) acquire the futex lock,
@@ -143,6 +146,7 @@
4) clear the 'list_op_pending' word.
On removal:
+
1) set the 'list_op_pending' word to the address of the 'lock entry'
to be removed,
2) remove the lock entry for this lock from the 'head' list,
diff --git a/Documentation/robust-futexes.txt b/Documentation/robust-futexes.txt
index 61c22d6..6c42c75 100644
--- a/Documentation/robust-futexes.txt
+++ b/Documentation/robust-futexes.txt
@@ -1,4 +1,8 @@
-Started by: Ingo Molnar <mingo@redhat.com>
+========================================
+A description of what robust futexes are
+========================================
+
+:Started by: Ingo Molnar <mingo@redhat.com>
Background
----------
@@ -163,7 +167,7 @@
----------------------
The patch adds two new syscalls: one to register the userspace list, and
-one to query the registered list pointer:
+one to query the registered list pointer::
asmlinkage long
sys_set_robust_list(struct robust_list_head __user *head,
@@ -185,7 +189,7 @@
robust and normal futexes.
If a futex is found to be held at exit time, the kernel sets the
-following bit of the futex word:
+following bit of the futex word::
#define FUTEX_OWNER_DIED 0x40000000
@@ -193,7 +197,7 @@
the cleanup.
Otherwise, robust futexes are acquired by glibc by putting the TID into
-the futex field atomically. Waiters set the FUTEX_WAITERS bit:
+the futex field atomically. Waiters set the FUTEX_WAITERS bit::
#define FUTEX_WAITERS 0x80000000
diff --git a/Documentation/rpmsg.txt b/Documentation/rpmsg.txt
index a95e36a..24b7a9e 100644
--- a/Documentation/rpmsg.txt
+++ b/Documentation/rpmsg.txt
@@ -1,10 +1,15 @@
+============================================
Remote Processor Messaging (rpmsg) Framework
+============================================
-Note: this document describes the rpmsg bus and how to write rpmsg drivers.
-To learn how to add rpmsg support for new platforms, check out remoteproc.txt
-(also a resident of Documentation/).
+.. note::
-1. Introduction
+ This document describes the rpmsg bus and how to write rpmsg drivers.
+ To learn how to add rpmsg support for new platforms, check out remoteproc.txt
+ (also a resident of Documentation/).
+
+Introduction
+============
Modern SoCs typically employ heterogeneous remote processor devices in
asymmetric multiprocessing (AMP) configurations, which may be running
@@ -58,170 +63,222 @@
with the payload of the inbound message).
-2. User API
+User API
+========
+
+::
int rpmsg_send(struct rpmsg_channel *rpdev, void *data, int len);
- - sends a message across to the remote processor on a given channel.
- The caller should specify the channel, the data it wants to send,
- and its length (in bytes). The message will be sent on the specified
- channel, i.e. its source and destination address fields will be
- set to the channel's src and dst addresses.
- In case there are no TX buffers available, the function will block until
- one becomes available (i.e. until the remote processor consumes
- a tx buffer and puts it back on virtio's used descriptor ring),
- or a timeout of 15 seconds elapses. When the latter happens,
- -ERESTARTSYS is returned.
- The function can only be called from a process context (for now).
- Returns 0 on success and an appropriate error value on failure.
+sends a message across to the remote processor on a given channel.
+The caller should specify the channel, the data it wants to send,
+and its length (in bytes). The message will be sent on the specified
+channel, i.e. its source and destination address fields will be
+set to the channel's src and dst addresses.
+
+In case there are no TX buffers available, the function will block until
+one becomes available (i.e. until the remote processor consumes
+a tx buffer and puts it back on virtio's used descriptor ring),
+or a timeout of 15 seconds elapses. When the latter happens,
+-ERESTARTSYS is returned.
+
+The function can only be called from a process context (for now).
+Returns 0 on success and an appropriate error value on failure.
+
+::
int rpmsg_sendto(struct rpmsg_channel *rpdev, void *data, int len, u32 dst);
- - sends a message across to the remote processor on a given channel,
- to a destination address provided by the caller.
- The caller should specify the channel, the data it wants to send,
- its length (in bytes), and an explicit destination address.
- The message will then be sent to the remote processor to which the
- channel belongs, using the channel's src address, and the user-provided
- dst address (thus the channel's dst address will be ignored).
- In case there are no TX buffers available, the function will block until
- one becomes available (i.e. until the remote processor consumes
- a tx buffer and puts it back on virtio's used descriptor ring),
- or a timeout of 15 seconds elapses. When the latter happens,
- -ERESTARTSYS is returned.
- The function can only be called from a process context (for now).
- Returns 0 on success and an appropriate error value on failure.
+sends a message across to the remote processor on a given channel,
+to a destination address provided by the caller.
+
+The caller should specify the channel, the data it wants to send,
+its length (in bytes), and an explicit destination address.
+
+The message will then be sent to the remote processor to which the
+channel belongs, using the channel's src address, and the user-provided
+dst address (thus the channel's dst address will be ignored).
+
+In case there are no TX buffers available, the function will block until
+one becomes available (i.e. until the remote processor consumes
+a tx buffer and puts it back on virtio's used descriptor ring),
+or a timeout of 15 seconds elapses. When the latter happens,
+-ERESTARTSYS is returned.
+
+The function can only be called from a process context (for now).
+Returns 0 on success and an appropriate error value on failure.
+
+::
int rpmsg_send_offchannel(struct rpmsg_channel *rpdev, u32 src, u32 dst,
void *data, int len);
- - sends a message across to the remote processor, using the src and dst
- addresses provided by the user.
- The caller should specify the channel, the data it wants to send,
- its length (in bytes), and explicit source and destination addresses.
- The message will then be sent to the remote processor to which the
- channel belongs, but the channel's src and dst addresses will be
- ignored (and the user-provided addresses will be used instead).
- In case there are no TX buffers available, the function will block until
- one becomes available (i.e. until the remote processor consumes
- a tx buffer and puts it back on virtio's used descriptor ring),
- or a timeout of 15 seconds elapses. When the latter happens,
- -ERESTARTSYS is returned.
- The function can only be called from a process context (for now).
- Returns 0 on success and an appropriate error value on failure.
+
+sends a message across to the remote processor, using the src and dst
+addresses provided by the user.
+
+The caller should specify the channel, the data it wants to send,
+its length (in bytes), and explicit source and destination addresses.
+The message will then be sent to the remote processor to which the
+channel belongs, but the channel's src and dst addresses will be
+ignored (and the user-provided addresses will be used instead).
+
+In case there are no TX buffers available, the function will block until
+one becomes available (i.e. until the remote processor consumes
+a tx buffer and puts it back on virtio's used descriptor ring),
+or a timeout of 15 seconds elapses. When the latter happens,
+-ERESTARTSYS is returned.
+
+The function can only be called from a process context (for now).
+Returns 0 on success and an appropriate error value on failure.
+
+::
int rpmsg_trysend(struct rpmsg_channel *rpdev, void *data, int len);
- - sends a message across to the remote processor on a given channel.
- The caller should specify the channel, the data it wants to send,
- and its length (in bytes). The message will be sent on the specified
- channel, i.e. its source and destination address fields will be
- set to the channel's src and dst addresses.
- In case there are no TX buffers available, the function will immediately
- return -ENOMEM without waiting until one becomes available.
- The function can only be called from a process context (for now).
- Returns 0 on success and an appropriate error value on failure.
+sends a message across to the remote processor on a given channel.
+The caller should specify the channel, the data it wants to send,
+and its length (in bytes). The message will be sent on the specified
+channel, i.e. its source and destination address fields will be
+set to the channel's src and dst addresses.
+
+In case there are no TX buffers available, the function will immediately
+return -ENOMEM without waiting until one becomes available.
+
+The function can only be called from a process context (for now).
+Returns 0 on success and an appropriate error value on failure.
+
+::
int rpmsg_trysendto(struct rpmsg_channel *rpdev, void *data, int len, u32 dst)
- - sends a message across to the remote processor on a given channel,
- to a destination address provided by the user.
- The user should specify the channel, the data it wants to send,
- its length (in bytes), and an explicit destination address.
- The message will then be sent to the remote processor to which the
- channel belongs, using the channel's src address, and the user-provided
- dst address (thus the channel's dst address will be ignored).
- In case there are no TX buffers available, the function will immediately
- return -ENOMEM without waiting until one becomes available.
- The function can only be called from a process context (for now).
- Returns 0 on success and an appropriate error value on failure.
+
+sends a message across to the remote processor on a given channel,
+to a destination address provided by the user.
+
+The user should specify the channel, the data it wants to send,
+its length (in bytes), and an explicit destination address.
+
+The message will then be sent to the remote processor to which the
+channel belongs, using the channel's src address, and the user-provided
+dst address (thus the channel's dst address will be ignored).
+
+In case there are no TX buffers available, the function will immediately
+return -ENOMEM without waiting until one becomes available.
+
+The function can only be called from a process context (for now).
+Returns 0 on success and an appropriate error value on failure.
+
+::
int rpmsg_trysend_offchannel(struct rpmsg_channel *rpdev, u32 src, u32 dst,
void *data, int len);
- - sends a message across to the remote processor, using source and
- destination addresses provided by the user.
- The user should specify the channel, the data it wants to send,
- its length (in bytes), and explicit source and destination addresses.
- The message will then be sent to the remote processor to which the
- channel belongs, but the channel's src and dst addresses will be
- ignored (and the user-provided addresses will be used instead).
- In case there are no TX buffers available, the function will immediately
- return -ENOMEM without waiting until one becomes available.
- The function can only be called from a process context (for now).
- Returns 0 on success and an appropriate error value on failure.
+
+sends a message across to the remote processor, using source and
+destination addresses provided by the user.
+
+The user should specify the channel, the data it wants to send,
+its length (in bytes), and explicit source and destination addresses.
+The message will then be sent to the remote processor to which the
+channel belongs, but the channel's src and dst addresses will be
+ignored (and the user-provided addresses will be used instead).
+
+In case there are no TX buffers available, the function will immediately
+return -ENOMEM without waiting until one becomes available.
+
+The function can only be called from a process context (for now).
+Returns 0 on success and an appropriate error value on failure.
+
+::
struct rpmsg_endpoint *rpmsg_create_ept(struct rpmsg_channel *rpdev,
void (*cb)(struct rpmsg_channel *, void *, int, void *, u32),
void *priv, u32 addr);
- - every rpmsg address in the system is bound to an rx callback (so when
- inbound messages arrive, they are dispatched by the rpmsg bus using the
- appropriate callback handler) by means of an rpmsg_endpoint struct.
- This function allows drivers to create such an endpoint, and by that,
- bind a callback, and possibly some private data too, to an rpmsg address
- (either one that is known in advance, or one that will be dynamically
- assigned for them).
+every rpmsg address in the system is bound to an rx callback (so when
+inbound messages arrive, they are dispatched by the rpmsg bus using the
+appropriate callback handler) by means of an rpmsg_endpoint struct.
- Simple rpmsg drivers need not call rpmsg_create_ept, because an endpoint
- is already created for them when they are probed by the rpmsg bus
- (using the rx callback they provide when they registered to the rpmsg bus).
+This function allows drivers to create such an endpoint, and by that,
+bind a callback, and possibly some private data too, to an rpmsg address
+(either one that is known in advance, or one that will be dynamically
+assigned for them).
- So things should just work for simple drivers: they already have an
- endpoint, their rx callback is bound to their rpmsg address, and when
- relevant inbound messages arrive (i.e. messages which their dst address
- equals to the src address of their rpmsg channel), the driver's handler
- is invoked to process it.
+Simple rpmsg drivers need not call rpmsg_create_ept, because an endpoint
+is already created for them when they are probed by the rpmsg bus
+(using the rx callback they provide when they registered to the rpmsg bus).
- That said, more complicated drivers might do need to allocate
- additional rpmsg addresses, and bind them to different rx callbacks.
- To accomplish that, those drivers need to call this function.
- Drivers should provide their channel (so the new endpoint would bind
- to the same remote processor their channel belongs to), an rx callback
- function, an optional private data (which is provided back when the
- rx callback is invoked), and an address they want to bind with the
- callback. If addr is RPMSG_ADDR_ANY, then rpmsg_create_ept will
- dynamically assign them an available rpmsg address (drivers should have
- a very good reason why not to always use RPMSG_ADDR_ANY here).
+So things should just work for simple drivers: they already have an
+endpoint, their rx callback is bound to their rpmsg address, and when
+relevant inbound messages arrive (i.e. messages which their dst address
+equals to the src address of their rpmsg channel), the driver's handler
+is invoked to process it.
- Returns a pointer to the endpoint on success, or NULL on error.
+That said, more complicated drivers might do need to allocate
+additional rpmsg addresses, and bind them to different rx callbacks.
+To accomplish that, those drivers need to call this function.
+Drivers should provide their channel (so the new endpoint would bind
+to the same remote processor their channel belongs to), an rx callback
+function, an optional private data (which is provided back when the
+rx callback is invoked), and an address they want to bind with the
+callback. If addr is RPMSG_ADDR_ANY, then rpmsg_create_ept will
+dynamically assign them an available rpmsg address (drivers should have
+a very good reason why not to always use RPMSG_ADDR_ANY here).
+
+Returns a pointer to the endpoint on success, or NULL on error.
+
+::
void rpmsg_destroy_ept(struct rpmsg_endpoint *ept);
- - destroys an existing rpmsg endpoint. user should provide a pointer
- to an rpmsg endpoint that was previously created with rpmsg_create_ept().
+
+
+destroys an existing rpmsg endpoint. user should provide a pointer
+to an rpmsg endpoint that was previously created with rpmsg_create_ept().
+
+::
int register_rpmsg_driver(struct rpmsg_driver *rpdrv);
- - registers an rpmsg driver with the rpmsg bus. user should provide
- a pointer to an rpmsg_driver struct, which contains the driver's
- ->probe() and ->remove() functions, an rx callback, and an id_table
- specifying the names of the channels this driver is interested to
- be probed with.
+
+
+registers an rpmsg driver with the rpmsg bus. user should provide
+a pointer to an rpmsg_driver struct, which contains the driver's
+->probe() and ->remove() functions, an rx callback, and an id_table
+specifying the names of the channels this driver is interested to
+be probed with.
+
+::
void unregister_rpmsg_driver(struct rpmsg_driver *rpdrv);
- - unregisters an rpmsg driver from the rpmsg bus. user should provide
- a pointer to a previously-registered rpmsg_driver struct.
- Returns 0 on success, and an appropriate error value on failure.
-3. Typical usage
+unregisters an rpmsg driver from the rpmsg bus. user should provide
+a pointer to a previously-registered rpmsg_driver struct.
+Returns 0 on success, and an appropriate error value on failure.
+
+
+Typical usage
+=============
The following is a simple rpmsg driver, that sends an "hello!" message
on probe(), and whenever it receives an incoming message, it dumps its
content to the console.
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/rpmsg.h>
+::
-static void rpmsg_sample_cb(struct rpmsg_channel *rpdev, void *data, int len,
+ #include <linux/kernel.h>
+ #include <linux/module.h>
+ #include <linux/rpmsg.h>
+
+ static void rpmsg_sample_cb(struct rpmsg_channel *rpdev, void *data, int len,
void *priv, u32 src)
-{
+ {
print_hex_dump(KERN_INFO, "incoming message:", DUMP_PREFIX_NONE,
16, 1, data, len, true);
-}
+ }
-static int rpmsg_sample_probe(struct rpmsg_channel *rpdev)
-{
+ static int rpmsg_sample_probe(struct rpmsg_channel *rpdev)
+ {
int err;
dev_info(&rpdev->dev, "chnl: 0x%x -> 0x%x\n", rpdev->src, rpdev->dst);
@@ -234,32 +291,35 @@
}
return 0;
-}
+ }
-static void rpmsg_sample_remove(struct rpmsg_channel *rpdev)
-{
+ static void rpmsg_sample_remove(struct rpmsg_channel *rpdev)
+ {
dev_info(&rpdev->dev, "rpmsg sample client driver is removed\n");
-}
+ }
-static struct rpmsg_device_id rpmsg_driver_sample_id_table[] = {
+ static struct rpmsg_device_id rpmsg_driver_sample_id_table[] = {
{ .name = "rpmsg-client-sample" },
{ },
-};
-MODULE_DEVICE_TABLE(rpmsg, rpmsg_driver_sample_id_table);
+ };
+ MODULE_DEVICE_TABLE(rpmsg, rpmsg_driver_sample_id_table);
-static struct rpmsg_driver rpmsg_sample_client = {
+ static struct rpmsg_driver rpmsg_sample_client = {
.drv.name = KBUILD_MODNAME,
.id_table = rpmsg_driver_sample_id_table,
.probe = rpmsg_sample_probe,
.callback = rpmsg_sample_cb,
.remove = rpmsg_sample_remove,
-};
-module_rpmsg_driver(rpmsg_sample_client);
+ };
+ module_rpmsg_driver(rpmsg_sample_client);
-Note: a similar sample which can be built and loaded can be found
-in samples/rpmsg/.
+.. note::
-4. Allocations of rpmsg channels:
+ a similar sample which can be built and loaded can be found
+ in samples/rpmsg/.
+
+Allocations of rpmsg channels
+=============================
At this point we only support dynamic allocations of rpmsg channels.
diff --git a/Documentation/rtc.txt b/Documentation/rtc.txt
index ddc3660..c0c9774 100644
--- a/Documentation/rtc.txt
+++ b/Documentation/rtc.txt
@@ -1,6 +1,6 @@
-
- Real Time Clock (RTC) Drivers for Linux
- =======================================
+=======================================
+Real Time Clock (RTC) Drivers for Linux
+=======================================
When Linux developers talk about a "Real Time Clock", they usually mean
something that tracks wall clock time and is battery backed so that it
@@ -32,8 +32,8 @@
be able to schedule one any time in the upcoming century.
- Old PC/AT-Compatible driver: /dev/rtc
- --------------------------------------
+Old PC/AT-Compatible driver: /dev/rtc
+--------------------------------------
All PCs (even Alpha machines) have a Real Time Clock built into them.
Usually they are built into the chipset of the computer, but some may
@@ -105,8 +105,8 @@
(The original /dev/rtc driver was written by Paul Gortmaker.)
- New portable "RTC Class" drivers: /dev/rtcN
- --------------------------------------------
+New portable "RTC Class" drivers: /dev/rtcN
+--------------------------------------------
Because Linux supports many non-ACPI and non-PC platforms, some of which
have more than one RTC style clock, it needed a more portable solution
@@ -136,35 +136,39 @@
the system clock from the discrete RTC, but use the integrated one for all
other tasks, because of its greater functionality.
-SYSFS INTERFACE
+SYSFS interface
---------------
The sysfs interface under /sys/class/rtc/rtcN provides access to various
rtc attributes without requiring the use of ioctls. All dates and times
are in the RTC's timezone, rather than in system time.
-date: RTC-provided date
-hctosys: 1 if the RTC provided the system time at boot via the
+================ ==============================================================
+date RTC-provided date
+hctosys 1 if the RTC provided the system time at boot via the
CONFIG_RTC_HCTOSYS kernel option, 0 otherwise
-max_user_freq: The maximum interrupt rate an unprivileged user may request
+max_user_freq The maximum interrupt rate an unprivileged user may request
from this RTC.
-name: The name of the RTC corresponding to this sysfs directory
-since_epoch: The number of seconds since the epoch according to the RTC
-time: RTC-provided time
-wakealarm: The time at which the clock will generate a system wakeup
+name The name of the RTC corresponding to this sysfs directory
+since_epoch The number of seconds since the epoch according to the RTC
+time RTC-provided time
+wakealarm The time at which the clock will generate a system wakeup
event. This is a one shot wakeup event, so must be reset
- after wake if a daily wakeup is required. Format is seconds since
- the epoch by default, or if there's a leading +, seconds in the
- future, or if there is a leading +=, seconds ahead of the current
- alarm.
-offset: The amount which the rtc clock has been adjusted in firmware.
+ after wake if a daily wakeup is required. Format is seconds
+ since the epoch by default, or if there's a leading +, seconds
+ in the future, or if there is a leading +=, seconds ahead of
+ the current alarm.
+offset The amount which the rtc clock has been adjusted in firmware.
Visible only if the driver supports clock offset adjustment.
The unit is parts per billion, i.e. The number of clock ticks
which are added to or removed from the rtc's base clock per
billion ticks. A positive value makes a day pass more slowly,
longer, and a negative value makes a day pass more quickly.
+*/nvmem The non volatile storage exported as a raw file, as described
+ in Documentation/nvmem/nvmem.txt
+================ ==============================================================
-IOCTL INTERFACE
+IOCTL interface
---------------
The ioctl() calls supported by /dev/rtc are also supported by the RTC class
diff --git a/Documentation/security/keys/core.rst b/Documentation/security/keys/core.rst
index 0d831a7..1648fa8 100644
--- a/Documentation/security/keys/core.rst
+++ b/Documentation/security/keys/core.rst
@@ -894,6 +894,12 @@
To apply a keyring restriction the process must have Set Attribute
permission and the keyring must not be previously restricted.
+ One application of restricted keyrings is to verify X.509 certificate
+ chains or individual certificate signatures using the asymmetric key type.
+ See Documentation/crypto/asymmetric-keys.txt for specific restrictions
+ applicable to the asymmetric key type.
+
+
Kernel Services
===============
diff --git a/Documentation/sgi-ioc4.txt b/Documentation/sgi-ioc4.txt
index 876c96a..7270922 100644
--- a/Documentation/sgi-ioc4.txt
+++ b/Documentation/sgi-ioc4.txt
@@ -1,3 +1,7 @@
+====================================
+SGI IOC4 PCI (multi function) device
+====================================
+
The SGI IOC4 PCI device is a bit of a strange beast, so some notes on
it are in order.
diff --git a/Documentation/siphash.txt b/Documentation/siphash.txt
index 908d348..9965821 100644
--- a/Documentation/siphash.txt
+++ b/Documentation/siphash.txt
@@ -1,6 +1,8 @@
- SipHash - a short input PRF
------------------------------------------------
-Written by Jason A. Donenfeld <jason@zx2c4.com>
+===========================
+SipHash - a short input PRF
+===========================
+
+:Author: Written by Jason A. Donenfeld <jason@zx2c4.com>
SipHash is a cryptographically secure PRF -- a keyed hash function -- that
performs very well for short inputs, hence the name. It was designed by
@@ -13,58 +15,61 @@
indistinguishable from random. You may then use that integer as part of secure
sequence numbers, secure cookies, or mask it off for use in a hash table.
-1. Generating a key
+Generating a key
+================
Keys should always be generated from a cryptographically secure source of
-random numbers, either using get_random_bytes or get_random_once:
+random numbers, either using get_random_bytes or get_random_once::
-siphash_key_t key;
-get_random_bytes(&key, sizeof(key));
+ siphash_key_t key;
+ get_random_bytes(&key, sizeof(key));
If you're not deriving your key from here, you're doing it wrong.
-2. Using the functions
+Using the functions
+===================
There are two variants of the function, one that takes a list of integers, and
-one that takes a buffer:
+one that takes a buffer::
-u64 siphash(const void *data, size_t len, const siphash_key_t *key);
+ u64 siphash(const void *data, size_t len, const siphash_key_t *key);
-And:
+And::
-u64 siphash_1u64(u64, const siphash_key_t *key);
-u64 siphash_2u64(u64, u64, const siphash_key_t *key);
-u64 siphash_3u64(u64, u64, u64, const siphash_key_t *key);
-u64 siphash_4u64(u64, u64, u64, u64, const siphash_key_t *key);
-u64 siphash_1u32(u32, const siphash_key_t *key);
-u64 siphash_2u32(u32, u32, const siphash_key_t *key);
-u64 siphash_3u32(u32, u32, u32, const siphash_key_t *key);
-u64 siphash_4u32(u32, u32, u32, u32, const siphash_key_t *key);
+ u64 siphash_1u64(u64, const siphash_key_t *key);
+ u64 siphash_2u64(u64, u64, const siphash_key_t *key);
+ u64 siphash_3u64(u64, u64, u64, const siphash_key_t *key);
+ u64 siphash_4u64(u64, u64, u64, u64, const siphash_key_t *key);
+ u64 siphash_1u32(u32, const siphash_key_t *key);
+ u64 siphash_2u32(u32, u32, const siphash_key_t *key);
+ u64 siphash_3u32(u32, u32, u32, const siphash_key_t *key);
+ u64 siphash_4u32(u32, u32, u32, u32, const siphash_key_t *key);
If you pass the generic siphash function something of a constant length, it
will constant fold at compile-time and automatically choose one of the
optimized functions.
-3. Hashtable key function usage:
+Hashtable key function usage::
-struct some_hashtable {
- DECLARE_HASHTABLE(hashtable, 8);
- siphash_key_t key;
-};
+ struct some_hashtable {
+ DECLARE_HASHTABLE(hashtable, 8);
+ siphash_key_t key;
+ };
-void init_hashtable(struct some_hashtable *table)
-{
- get_random_bytes(&table->key, sizeof(table->key));
-}
+ void init_hashtable(struct some_hashtable *table)
+ {
+ get_random_bytes(&table->key, sizeof(table->key));
+ }
-static inline hlist_head *some_hashtable_bucket(struct some_hashtable *table, struct interesting_input *input)
-{
- return &table->hashtable[siphash(input, sizeof(*input), &table->key) & (HASH_SIZE(table->hashtable) - 1)];
-}
+ static inline hlist_head *some_hashtable_bucket(struct some_hashtable *table, struct interesting_input *input)
+ {
+ return &table->hashtable[siphash(input, sizeof(*input), &table->key) & (HASH_SIZE(table->hashtable) - 1)];
+ }
You may then iterate like usual over the returned hash bucket.
-4. Security
+Security
+========
SipHash has a very high security margin, with its 128-bit key. So long as the
key is kept secret, it is impossible for an attacker to guess the outputs of
@@ -73,7 +78,8 @@
Linux implements the "2-4" variant of SipHash.
-5. Struct-passing Pitfalls
+Struct-passing Pitfalls
+=======================
Often times the XuY functions will not be large enough, and instead you'll
want to pass a pre-filled struct to siphash. When doing this, it's important
@@ -81,30 +87,32 @@
is to simply arrange the members of the struct in descending order of size,
and to use offsetendof() instead of sizeof() for getting the size. For
performance reasons, if possible, it's probably a good thing to align the
-struct to the right boundary. Here's an example:
+struct to the right boundary. Here's an example::
-const struct {
- struct in6_addr saddr;
- u32 counter;
- u16 dport;
-} __aligned(SIPHASH_ALIGNMENT) combined = {
- .saddr = *(struct in6_addr *)saddr,
- .counter = counter,
- .dport = dport
-};
-u64 h = siphash(&combined, offsetofend(typeof(combined), dport), &secret);
+ const struct {
+ struct in6_addr saddr;
+ u32 counter;
+ u16 dport;
+ } __aligned(SIPHASH_ALIGNMENT) combined = {
+ .saddr = *(struct in6_addr *)saddr,
+ .counter = counter,
+ .dport = dport
+ };
+ u64 h = siphash(&combined, offsetofend(typeof(combined), dport), &secret);
-6. Resources
+Resources
+=========
Read the SipHash paper if you're interested in learning more:
https://131002.net/siphash/siphash.pdf
+-------------------------------------------------------------------------------
-~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
-
+===============================================
HalfSipHash - SipHash's insecure younger cousin
------------------------------------------------
-Written by Jason A. Donenfeld <jason@zx2c4.com>
+===============================================
+
+:Author: Written by Jason A. Donenfeld <jason@zx2c4.com>
On the off-chance that SipHash is not fast enough for your needs, you might be
able to justify using HalfSipHash, a terrifying but potentially useful
@@ -120,7 +128,8 @@
transmitted out of the kernel. This is only remotely useful over `jhash` as a
means of mitigating hashtable flooding denial of service attacks.
-1. Generating a key
+Generating a key
+================
Keys should always be generated from a cryptographically secure source of
random numbers, either using get_random_bytes or get_random_once:
@@ -130,44 +139,49 @@
If you're not deriving your key from here, you're doing it wrong.
-2. Using the functions
+Using the functions
+===================
There are two variants of the function, one that takes a list of integers, and
-one that takes a buffer:
+one that takes a buffer::
-u32 hsiphash(const void *data, size_t len, const hsiphash_key_t *key);
+ u32 hsiphash(const void *data, size_t len, const hsiphash_key_t *key);
-And:
+And::
-u32 hsiphash_1u32(u32, const hsiphash_key_t *key);
-u32 hsiphash_2u32(u32, u32, const hsiphash_key_t *key);
-u32 hsiphash_3u32(u32, u32, u32, const hsiphash_key_t *key);
-u32 hsiphash_4u32(u32, u32, u32, u32, const hsiphash_key_t *key);
+ u32 hsiphash_1u32(u32, const hsiphash_key_t *key);
+ u32 hsiphash_2u32(u32, u32, const hsiphash_key_t *key);
+ u32 hsiphash_3u32(u32, u32, u32, const hsiphash_key_t *key);
+ u32 hsiphash_4u32(u32, u32, u32, u32, const hsiphash_key_t *key);
If you pass the generic hsiphash function something of a constant length, it
will constant fold at compile-time and automatically choose one of the
optimized functions.
-3. Hashtable key function usage:
+Hashtable key function usage
+============================
-struct some_hashtable {
- DECLARE_HASHTABLE(hashtable, 8);
- hsiphash_key_t key;
-};
+::
-void init_hashtable(struct some_hashtable *table)
-{
- get_random_bytes(&table->key, sizeof(table->key));
-}
+ struct some_hashtable {
+ DECLARE_HASHTABLE(hashtable, 8);
+ hsiphash_key_t key;
+ };
-static inline hlist_head *some_hashtable_bucket(struct some_hashtable *table, struct interesting_input *input)
-{
- return &table->hashtable[hsiphash(input, sizeof(*input), &table->key) & (HASH_SIZE(table->hashtable) - 1)];
-}
+ void init_hashtable(struct some_hashtable *table)
+ {
+ get_random_bytes(&table->key, sizeof(table->key));
+ }
+
+ static inline hlist_head *some_hashtable_bucket(struct some_hashtable *table, struct interesting_input *input)
+ {
+ return &table->hashtable[hsiphash(input, sizeof(*input), &table->key) & (HASH_SIZE(table->hashtable) - 1)];
+ }
You may then iterate like usual over the returned hash bucket.
-4. Performance
+Performance
+===========
HalfSipHash is roughly 3 times slower than JenkinsHash. For many replacements,
this will not be a problem, as the hashtable lookup isn't the bottleneck. And
diff --git a/Documentation/smsc_ece1099.txt b/Documentation/smsc_ece1099.txt
index 6b492e8..0792774 100644
--- a/Documentation/smsc_ece1099.txt
+++ b/Documentation/smsc_ece1099.txt
@@ -1,3 +1,7 @@
+=================================================
+Msc Keyboard Scan Expansion/GPIO Expansion device
+=================================================
+
What is smsc-ece1099?
----------------------
diff --git a/Documentation/static-keys.txt b/Documentation/static-keys.txt
index ef419fd..b83dfa1 100644
--- a/Documentation/static-keys.txt
+++ b/Documentation/static-keys.txt
@@ -1,30 +1,34 @@
- Static Keys
- -----------
+===========
+Static Keys
+===========
-DEPRECATED API:
+.. warning::
-The use of 'struct static_key' directly, is now DEPRECATED. In addition
-static_key_{true,false}() is also DEPRECATED. IE DO NOT use the following:
+ DEPRECATED API:
-struct static_key false = STATIC_KEY_INIT_FALSE;
-struct static_key true = STATIC_KEY_INIT_TRUE;
-static_key_true()
-static_key_false()
+ The use of 'struct static_key' directly, is now DEPRECATED. In addition
+ static_key_{true,false}() is also DEPRECATED. IE DO NOT use the following::
-The updated API replacements are:
+ struct static_key false = STATIC_KEY_INIT_FALSE;
+ struct static_key true = STATIC_KEY_INIT_TRUE;
+ static_key_true()
+ static_key_false()
-DEFINE_STATIC_KEY_TRUE(key);
-DEFINE_STATIC_KEY_FALSE(key);
-DEFINE_STATIC_KEY_ARRAY_TRUE(keys, count);
-DEFINE_STATIC_KEY_ARRAY_FALSE(keys, count);
-static_branch_likely()
-static_branch_unlikely()
+ The updated API replacements are::
-0) Abstract
+ DEFINE_STATIC_KEY_TRUE(key);
+ DEFINE_STATIC_KEY_FALSE(key);
+ DEFINE_STATIC_KEY_ARRAY_TRUE(keys, count);
+ DEFINE_STATIC_KEY_ARRAY_FALSE(keys, count);
+ static_branch_likely()
+ static_branch_unlikely()
+
+Abstract
+========
Static keys allows the inclusion of seldom used features in
performance-sensitive fast-path kernel code, via a GCC feature and a code
-patching technique. A quick example:
+patching technique. A quick example::
DEFINE_STATIC_KEY_FALSE(key);
@@ -45,7 +49,8 @@
impact to the likely code path as possible.
-1) Motivation
+Motivation
+==========
Currently, tracepoints are implemented using a conditional branch. The
@@ -60,7 +65,8 @@
kernel code paths should be able to make use of the static keys facility.
-2) Solution
+Solution
+========
gcc (v4.5) adds a new 'asm goto' statement that allows branching to a label:
@@ -71,7 +77,7 @@
by default, without the need to check memory. Then, at run-time, we can patch
the branch site to change the branch direction.
-For example, if we have a simple branch that is disabled by default:
+For example, if we have a simple branch that is disabled by default::
if (static_branch_unlikely(&key))
printk("I am the true branch\n");
@@ -87,14 +93,15 @@
This lowlevel patching mechanism is called 'jump label patching', and it gives
the basis for the static keys facility.
-3) Static key label API, usage and examples:
+Static key label API, usage and examples
+========================================
-In order to make use of this optimization you must first define a key:
+In order to make use of this optimization you must first define a key::
DEFINE_STATIC_KEY_TRUE(key);
-or:
+or::
DEFINE_STATIC_KEY_FALSE(key);
@@ -102,14 +109,14 @@
The key must be global, that is, it can't be allocated on the stack or dynamically
allocated at run-time.
-The key is then used in code as:
+The key is then used in code as::
if (static_branch_unlikely(&key))
do unlikely code
else
do likely code
-Or:
+Or::
if (static_branch_likely(&key))
do likely code
@@ -120,15 +127,15 @@
be used in either static_branch_likely() or static_branch_unlikely()
statements.
-Branch(es) can be set true via:
+Branch(es) can be set true via::
-static_branch_enable(&key);
+ static_branch_enable(&key);
-or false via:
+or false via::
-static_branch_disable(&key);
+ static_branch_disable(&key);
-The branch(es) can then be switched via reference counts:
+The branch(es) can then be switched via reference counts::
static_branch_inc(&key);
...
@@ -142,11 +149,11 @@
key is initialized false, a 'static_branch_inc()', will change the branch to
true. And then a 'static_branch_dec()', will again make the branch false.
-Where an array of keys is required, it can be defined as:
+Where an array of keys is required, it can be defined as::
DEFINE_STATIC_KEY_ARRAY_TRUE(keys, count);
-or:
+or::
DEFINE_STATIC_KEY_ARRAY_FALSE(keys, count);
@@ -159,96 +166,98 @@
struct jump_entry table must be at least 4-byte aligned because the
static_key->entry field makes use of the two least significant bits.
-* select HAVE_ARCH_JUMP_LABEL, see: arch/x86/Kconfig
+* ``select HAVE_ARCH_JUMP_LABEL``,
+ see: arch/x86/Kconfig
-* #define JUMP_LABEL_NOP_SIZE, see: arch/x86/include/asm/jump_label.h
+* ``#define JUMP_LABEL_NOP_SIZE``,
+ see: arch/x86/include/asm/jump_label.h
-* __always_inline bool arch_static_branch(struct static_key *key, bool branch), see:
- arch/x86/include/asm/jump_label.h
+* ``__always_inline bool arch_static_branch(struct static_key *key, bool branch)``,
+ see: arch/x86/include/asm/jump_label.h
-* __always_inline bool arch_static_branch_jump(struct static_key *key, bool branch),
- see: arch/x86/include/asm/jump_label.h
+* ``__always_inline bool arch_static_branch_jump(struct static_key *key, bool branch)``,
+ see: arch/x86/include/asm/jump_label.h
-* void arch_jump_label_transform(struct jump_entry *entry, enum jump_label_type type),
- see: arch/x86/kernel/jump_label.c
+* ``void arch_jump_label_transform(struct jump_entry *entry, enum jump_label_type type)``,
+ see: arch/x86/kernel/jump_label.c
-* __init_or_module void arch_jump_label_transform_static(struct jump_entry *entry, enum jump_label_type type),
- see: arch/x86/kernel/jump_label.c
+* ``__init_or_module void arch_jump_label_transform_static(struct jump_entry *entry, enum jump_label_type type)``,
+ see: arch/x86/kernel/jump_label.c
-
-* struct jump_entry, see: arch/x86/include/asm/jump_label.h
+* ``struct jump_entry``,
+ see: arch/x86/include/asm/jump_label.h
5) Static keys / jump label analysis, results (x86_64):
As an example, let's add the following branch to 'getppid()', such that the
-system call now looks like:
+system call now looks like::
-SYSCALL_DEFINE0(getppid)
-{
+ SYSCALL_DEFINE0(getppid)
+ {
int pid;
-+ if (static_branch_unlikely(&key))
-+ printk("I am the true branch\n");
+ + if (static_branch_unlikely(&key))
+ + printk("I am the true branch\n");
rcu_read_lock();
pid = task_tgid_vnr(rcu_dereference(current->real_parent));
rcu_read_unlock();
return pid;
-}
+ }
-The resulting instructions with jump labels generated by GCC is:
+The resulting instructions with jump labels generated by GCC is::
-ffffffff81044290 <sys_getppid>:
-ffffffff81044290: 55 push %rbp
-ffffffff81044291: 48 89 e5 mov %rsp,%rbp
-ffffffff81044294: e9 00 00 00 00 jmpq ffffffff81044299 <sys_getppid+0x9>
-ffffffff81044299: 65 48 8b 04 25 c0 b6 mov %gs:0xb6c0,%rax
-ffffffff810442a0: 00 00
-ffffffff810442a2: 48 8b 80 80 02 00 00 mov 0x280(%rax),%rax
-ffffffff810442a9: 48 8b 80 b0 02 00 00 mov 0x2b0(%rax),%rax
-ffffffff810442b0: 48 8b b8 e8 02 00 00 mov 0x2e8(%rax),%rdi
-ffffffff810442b7: e8 f4 d9 00 00 callq ffffffff81051cb0 <pid_vnr>
-ffffffff810442bc: 5d pop %rbp
-ffffffff810442bd: 48 98 cltq
-ffffffff810442bf: c3 retq
-ffffffff810442c0: 48 c7 c7 e3 54 98 81 mov $0xffffffff819854e3,%rdi
-ffffffff810442c7: 31 c0 xor %eax,%eax
-ffffffff810442c9: e8 71 13 6d 00 callq ffffffff8171563f <printk>
-ffffffff810442ce: eb c9 jmp ffffffff81044299 <sys_getppid+0x9>
+ ffffffff81044290 <sys_getppid>:
+ ffffffff81044290: 55 push %rbp
+ ffffffff81044291: 48 89 e5 mov %rsp,%rbp
+ ffffffff81044294: e9 00 00 00 00 jmpq ffffffff81044299 <sys_getppid+0x9>
+ ffffffff81044299: 65 48 8b 04 25 c0 b6 mov %gs:0xb6c0,%rax
+ ffffffff810442a0: 00 00
+ ffffffff810442a2: 48 8b 80 80 02 00 00 mov 0x280(%rax),%rax
+ ffffffff810442a9: 48 8b 80 b0 02 00 00 mov 0x2b0(%rax),%rax
+ ffffffff810442b0: 48 8b b8 e8 02 00 00 mov 0x2e8(%rax),%rdi
+ ffffffff810442b7: e8 f4 d9 00 00 callq ffffffff81051cb0 <pid_vnr>
+ ffffffff810442bc: 5d pop %rbp
+ ffffffff810442bd: 48 98 cltq
+ ffffffff810442bf: c3 retq
+ ffffffff810442c0: 48 c7 c7 e3 54 98 81 mov $0xffffffff819854e3,%rdi
+ ffffffff810442c7: 31 c0 xor %eax,%eax
+ ffffffff810442c9: e8 71 13 6d 00 callq ffffffff8171563f <printk>
+ ffffffff810442ce: eb c9 jmp ffffffff81044299 <sys_getppid+0x9>
-Without the jump label optimization it looks like:
+Without the jump label optimization it looks like::
-ffffffff810441f0 <sys_getppid>:
-ffffffff810441f0: 8b 05 8a 52 d8 00 mov 0xd8528a(%rip),%eax # ffffffff81dc9480 <key>
-ffffffff810441f6: 55 push %rbp
-ffffffff810441f7: 48 89 e5 mov %rsp,%rbp
-ffffffff810441fa: 85 c0 test %eax,%eax
-ffffffff810441fc: 75 27 jne ffffffff81044225 <sys_getppid+0x35>
-ffffffff810441fe: 65 48 8b 04 25 c0 b6 mov %gs:0xb6c0,%rax
-ffffffff81044205: 00 00
-ffffffff81044207: 48 8b 80 80 02 00 00 mov 0x280(%rax),%rax
-ffffffff8104420e: 48 8b 80 b0 02 00 00 mov 0x2b0(%rax),%rax
-ffffffff81044215: 48 8b b8 e8 02 00 00 mov 0x2e8(%rax),%rdi
-ffffffff8104421c: e8 2f da 00 00 callq ffffffff81051c50 <pid_vnr>
-ffffffff81044221: 5d pop %rbp
-ffffffff81044222: 48 98 cltq
-ffffffff81044224: c3 retq
-ffffffff81044225: 48 c7 c7 13 53 98 81 mov $0xffffffff81985313,%rdi
-ffffffff8104422c: 31 c0 xor %eax,%eax
-ffffffff8104422e: e8 60 0f 6d 00 callq ffffffff81715193 <printk>
-ffffffff81044233: eb c9 jmp ffffffff810441fe <sys_getppid+0xe>
-ffffffff81044235: 66 66 2e 0f 1f 84 00 data32 nopw %cs:0x0(%rax,%rax,1)
-ffffffff8104423c: 00 00 00 00
+ ffffffff810441f0 <sys_getppid>:
+ ffffffff810441f0: 8b 05 8a 52 d8 00 mov 0xd8528a(%rip),%eax # ffffffff81dc9480 <key>
+ ffffffff810441f6: 55 push %rbp
+ ffffffff810441f7: 48 89 e5 mov %rsp,%rbp
+ ffffffff810441fa: 85 c0 test %eax,%eax
+ ffffffff810441fc: 75 27 jne ffffffff81044225 <sys_getppid+0x35>
+ ffffffff810441fe: 65 48 8b 04 25 c0 b6 mov %gs:0xb6c0,%rax
+ ffffffff81044205: 00 00
+ ffffffff81044207: 48 8b 80 80 02 00 00 mov 0x280(%rax),%rax
+ ffffffff8104420e: 48 8b 80 b0 02 00 00 mov 0x2b0(%rax),%rax
+ ffffffff81044215: 48 8b b8 e8 02 00 00 mov 0x2e8(%rax),%rdi
+ ffffffff8104421c: e8 2f da 00 00 callq ffffffff81051c50 <pid_vnr>
+ ffffffff81044221: 5d pop %rbp
+ ffffffff81044222: 48 98 cltq
+ ffffffff81044224: c3 retq
+ ffffffff81044225: 48 c7 c7 13 53 98 81 mov $0xffffffff81985313,%rdi
+ ffffffff8104422c: 31 c0 xor %eax,%eax
+ ffffffff8104422e: e8 60 0f 6d 00 callq ffffffff81715193 <printk>
+ ffffffff81044233: eb c9 jmp ffffffff810441fe <sys_getppid+0xe>
+ ffffffff81044235: 66 66 2e 0f 1f 84 00 data32 nopw %cs:0x0(%rax,%rax,1)
+ ffffffff8104423c: 00 00 00 00
Thus, the disable jump label case adds a 'mov', 'test' and 'jne' instruction
vs. the jump label case just has a 'no-op' or 'jmp 0'. (The jmp 0, is patched
to a 5 byte atomic no-op instruction at boot-time.) Thus, the disabled jump
-label case adds:
+label case adds::
-6 (mov) + 2 (test) + 2 (jne) = 10 - 5 (5 byte jump 0) = 5 addition bytes.
+ 6 (mov) + 2 (test) + 2 (jne) = 10 - 5 (5 byte jump 0) = 5 addition bytes.
If we then include the padding bytes, the jump label code saves, 16 total bytes
of instruction memory for this small function. In this case the non-jump label
@@ -262,7 +271,7 @@
'pipe-test' (also known as 'perf bench sched pipe') can be used to show the
performance improvement. Testing done on 3.3.0-rc2:
-jump label disabled:
+jump label disabled::
Performance counter stats for 'bash -c /tmp/pipe-test' (50 runs):
@@ -279,7 +288,7 @@
1.601607384 seconds time elapsed ( +- 0.07% )
-jump label enabled:
+jump label enabled::
Performance counter stats for 'bash -c /tmp/pipe-test' (50 runs):
diff --git a/Documentation/svga.txt b/Documentation/svga.txt
index cd66ec8..119f151 100644
--- a/Documentation/svga.txt
+++ b/Documentation/svga.txt
@@ -1,24 +1,31 @@
- Video Mode Selection Support 2.13
- (c) 1995--1999 Martin Mares, <mj@ucw.cz>
---------------------------------------------------------------------------------
+.. include:: <isonum.txt>
-1. Intro
-~~~~~~~~
- This small document describes the "Video Mode Selection" feature which
+=================================
+Video Mode Selection Support 2.13
+=================================
+
+:Copyright: |copy| 1995--1999 Martin Mares, <mj@ucw.cz>
+
+Intro
+~~~~~
+
+This small document describes the "Video Mode Selection" feature which
allows the use of various special video modes supported by the video BIOS. Due
to usage of the BIOS, the selection is limited to boot time (before the
kernel decompression starts) and works only on 80X86 machines.
- ** Short intro for the impatient: Just use vga=ask for the first time,
- ** enter `scan' on the video mode prompt, pick the mode you want to use,
- ** remember its mode ID (the four-digit hexadecimal number) and then
- ** set the vga parameter to this number (converted to decimal first).
+.. note::
- The video mode to be used is selected by a kernel parameter which can be
+ Short intro for the impatient: Just use vga=ask for the first time,
+ enter ``scan`` on the video mode prompt, pick the mode you want to use,
+ remember its mode ID (the four-digit hexadecimal number) and then
+ set the vga parameter to this number (converted to decimal first).
+
+The video mode to be used is selected by a kernel parameter which can be
specified in the kernel Makefile (the SVGA_MODE=... line) or by the "vga=..."
option of LILO (or some other boot loader you use) or by the "vidmode" utility
(present in standard Linux utility packages). You can use the following values
-of this parameter:
+of this parameter::
NORMAL_VGA - Standard 80x25 mode available on all display adapters.
@@ -37,77 +44,79 @@
for exact meaning of the ID). Warning: rdev and LILO don't support
hexadecimal numbers -- you have to convert it to decimal manually.
-2. Menu
-~~~~~~~
- The ASK_VGA mode causes the kernel to offer a video mode menu upon
+Menu
+~~~~
+
+The ASK_VGA mode causes the kernel to offer a video mode menu upon
bootup. It displays a "Press <RETURN> to see video modes available, <SPACE>
to continue or wait 30 secs" message. If you press <RETURN>, you enter the
menu, if you press <SPACE> or wait 30 seconds, the kernel will boot up in
the standard 80x25 mode.
- The menu looks like:
+The menu looks like::
-Video adapter: <name-of-detected-video-adapter>
-Mode: COLSxROWS:
-0 0F00 80x25
-1 0F01 80x50
-2 0F02 80x43
-3 0F03 80x26
-....
-Enter mode number or `scan': <flashing-cursor-here>
+ Video adapter: <name-of-detected-video-adapter>
+ Mode: COLSxROWS:
+ 0 0F00 80x25
+ 1 0F01 80x50
+ 2 0F02 80x43
+ 3 0F03 80x26
+ ....
+ Enter mode number or ``scan``: <flashing-cursor-here>
- <name-of-detected-video-adapter> tells what video adapter did Linux detect
+<name-of-detected-video-adapter> tells what video adapter did Linux detect
-- it's either a generic adapter name (MDA, CGA, HGC, EGA, VGA, VESA VGA [a VGA
with VESA-compliant BIOS]) or a chipset name (e.g., Trident). Direct detection
of chipsets is turned off by default (see CONFIG_VIDEO_SVGA in chapter 4 to see
how to enable it if you really want) as it's inherently unreliable due to
absolutely insane PC design.
- "0 0F00 80x25" means that the first menu item (the menu items are numbered
+"0 0F00 80x25" means that the first menu item (the menu items are numbered
from "0" to "9" and from "a" to "z") is a 80x25 mode with ID=0x0f00 (see the
next section for a description of mode IDs).
- <flashing-cursor-here> encourages you to enter the item number or mode ID
+<flashing-cursor-here> encourages you to enter the item number or mode ID
you wish to set and press <RETURN>. If the computer complains something about
"Unknown mode ID", it is trying to tell you that it isn't possible to set such
a mode. It's also possible to press only <RETURN> which leaves the current mode.
- The mode list usually contains a few basic modes and some VESA modes. In
+The mode list usually contains a few basic modes and some VESA modes. In
case your chipset has been detected, some chipset-specific modes are shown as
well (some of these might be missing or unusable on your machine as different
BIOSes are often shipped with the same card and the mode numbers depend purely
on the VGA BIOS).
- The modes displayed on the menu are partially sorted: The list starts with
+The modes displayed on the menu are partially sorted: The list starts with
the standard modes (80x25 and 80x50) followed by "special" modes (80x28 and
80x43), local modes (if the local modes feature is enabled), VESA modes and
finally SVGA modes for the auto-detected adapter.
- If you are not happy with the mode list offered (e.g., if you think your card
+If you are not happy with the mode list offered (e.g., if you think your card
is able to do more), you can enter "scan" instead of item number / mode ID. The
program will try to ask the BIOS for all possible video mode numbers and test
what happens then. The screen will be probably flashing wildly for some time and
strange noises will be heard from inside the monitor and so on and then, really
all consistent video modes supported by your BIOS will appear (plus maybe some
-`ghost modes'). If you are afraid this could damage your monitor, don't use this
-function.
+``ghost modes``). If you are afraid this could damage your monitor, don't use
+this function.
- After scanning, the mode ordering is a bit different: the auto-detected SVGA
-modes are not listed at all and the modes revealed by `scan' are shown before
+After scanning, the mode ordering is a bit different: the auto-detected SVGA
+modes are not listed at all and the modes revealed by ``scan`` are shown before
all VESA modes.
-3. Mode IDs
-~~~~~~~~~~~
- Because of the complexity of all the video stuff, the video mode IDs
+Mode IDs
+~~~~~~~~
+
+Because of the complexity of all the video stuff, the video mode IDs
used here are also a bit complex. A video mode ID is a 16-bit number usually
expressed in a hexadecimal notation (starting with "0x"). You can set a mode
by entering its mode directly if you know it even if it isn't shown on the menu.
-The ID numbers can be divided to three regions:
+The ID numbers can be divided to those regions::
0x0000 to 0x00ff - menu item references. 0x0000 is the first item. Don't use
outside the menu as this can change from boot to boot (especially if you
- have used the `scan' feature).
+ have used the ``scan`` feature).
0x0100 to 0x017f - standard BIOS modes. The ID is a BIOS video mode number
(as presented to INT 10, function 00) increased by 0x0100.
@@ -142,53 +151,54 @@
0xffff equivalent to 0x0f00 (standard 80x25)
0xfffe equivalent to 0x0f01 (EGA 80x43 or VGA 80x50)
- If you add 0x8000 to the mode ID, the program will try to recalculate
+If you add 0x8000 to the mode ID, the program will try to recalculate
vertical display timing according to mode parameters, which can be used to
eliminate some annoying bugs of certain VGA BIOSes (usually those used for
cards with S3 chipsets and old Cirrus Logic BIOSes) -- mainly extra lines at the
end of the display.
-4. Options
-~~~~~~~~~~
- Some options can be set in the source text (in arch/i386/boot/video.S).
+Options
+~~~~~~~
+
+Some options can be set in the source text (in arch/i386/boot/video.S).
All of them are simple #define's -- change them to #undef's when you want to
switch them off. Currently supported:
- CONFIG_VIDEO_SVGA - enables autodetection of SVGA cards. This is switched
+CONFIG_VIDEO_SVGA - enables autodetection of SVGA cards. This is switched
off by default as it's a bit unreliable due to terribly bad PC design. If you
-really want to have the adapter autodetected (maybe in case the `scan' feature
+really want to have the adapter autodetected (maybe in case the ``scan`` feature
doesn't work on your machine), switch this on and don't cry if the results
are not completely sane. In case you really need this feature, please drop me
a mail as I think of removing it some day.
- CONFIG_VIDEO_VESA - enables autodetection of VESA modes. If it doesn't work
+CONFIG_VIDEO_VESA - enables autodetection of VESA modes. If it doesn't work
on your machine (or displays a "Error: Scanning of VESA modes failed" message),
you can switch it off and report as a bug.
- CONFIG_VIDEO_COMPACT - enables compacting of the video mode list. If there
+CONFIG_VIDEO_COMPACT - enables compacting of the video mode list. If there
are more modes with the same screen size, only the first one is kept (see above
for more info on mode ordering). However, in very strange cases it's possible
that the first "version" of the mode doesn't work although some of the others
do -- in this case turn this switch off to see the rest.
- CONFIG_VIDEO_RETAIN - enables retaining of screen contents when switching
+CONFIG_VIDEO_RETAIN - enables retaining of screen contents when switching
video modes. Works only with some boot loaders which leave enough room for the
buffer. (If you have old LILO, you can adjust heap_end_ptr and loadflags
in setup.S, but it's better to upgrade the boot loader...)
- CONFIG_VIDEO_LOCAL - enables inclusion of "local modes" in the list. The
+CONFIG_VIDEO_LOCAL - enables inclusion of "local modes" in the list. The
local modes are added automatically to the beginning of the list not depending
on hardware configuration. The local modes are listed in the source text after
the "local_mode_table:" line. The comment before this line describes the format
of the table (which also includes a video card name to be displayed on the
top of the menu).
- CONFIG_VIDEO_400_HACK - force setting of 400 scan lines for standard VGA
+CONFIG_VIDEO_400_HACK - force setting of 400 scan lines for standard VGA
modes. This option is intended to be used on certain buggy BIOSes which draw
some useless logo using font download and then fail to reset the correct mode.
Don't use unless needed as it forces resetting the video card.
- CONFIG_VIDEO_GFX_HACK - includes special hack for setting of graphics modes
+CONFIG_VIDEO_GFX_HACK - includes special hack for setting of graphics modes
to be used later by special drivers (e.g., 800x600 on IBM ThinkPad -- see
ftp://ftp.phys.keio.ac.jp/pub/XFree86/800x600/XF86Configs/XF86Config.IBM_TP560).
Allows to set _any_ BIOS mode including graphic ones and forcing specific
@@ -196,33 +206,36 @@
unless you think you know what you're doing. To activate this setup, use
mode number 0x0f08 (see section 3).
-5. Still doesn't work?
-~~~~~~~~~~~~~~~~~~~~~~
- When the mode detection doesn't work (e.g., the mode list is incorrect or
+Still doesn't work?
+~~~~~~~~~~~~~~~~~~~
+
+When the mode detection doesn't work (e.g., the mode list is incorrect or
the machine hangs instead of displaying the menu), try to switch off some of
the configuration options listed in section 4. If it fails, you can still use
your kernel with the video mode set directly via the kernel parameter.
- In either case, please send me a bug report containing what _exactly_
+In either case, please send me a bug report containing what _exactly_
happens and how do the configuration switches affect the behaviour of the bug.
- If you start Linux from M$-DOS, you might also use some DOS tools for
+If you start Linux from M$-DOS, you might also use some DOS tools for
video mode setting. In this case, you must specify the 0x0f04 mode ("leave
current settings") to Linux, because if you don't and you use any non-standard
mode, Linux will switch to 80x25 automatically.
- If you set some extended mode and there's one or more extra lines on the
+If you set some extended mode and there's one or more extra lines on the
bottom of the display containing already scrolled-out text, your VGA BIOS
contains the most common video BIOS bug called "incorrect vertical display
end setting". Adding 0x8000 to the mode ID might fix the problem. Unfortunately,
this must be done manually -- no autodetection mechanisms are available.
- If you have a VGA card and your display still looks as on EGA, your BIOS
+If you have a VGA card and your display still looks as on EGA, your BIOS
is probably broken and you need to set the CONFIG_VIDEO_400_HACK switch to
force setting of the correct mode.
-6. History
-~~~~~~~~~~
+History
+~~~~~~~
+
+=============== ================================================================
1.0 (??-Nov-95) First version supporting all adapters supported by the old
setup.S + Cirrus Logic 54XX. Present in some 1.3.4? kernels
and then removed due to instability on some machines.
@@ -260,17 +273,18 @@
original version written by hhanemaa@cs.ruu.nl, patched by
Jeff Chua, rewritten by me).
- Screen store/restore fixed.
-2.8 (14-Apr-96) - Previous release was not compilable without CONFIG_VIDEO_SVGA.
+2.8 (14-Apr-96) - Previous release was not compilable without CONFIG_VIDEO_SVGA.
- Better recognition of text modes during mode scan.
2.9 (12-May-96) - Ignored VESA modes 0x80 - 0xff (more VESA BIOS bugs!)
-2.10 (11-Nov-96)- The whole thing made optional.
+2.10(11-Nov-96) - The whole thing made optional.
- Added the CONFIG_VIDEO_400_HACK switch.
- Added the CONFIG_VIDEO_GFX_HACK switch.
- Code cleanup.
-2.11 (03-May-97)- Yet another cleanup, now including also the documentation.
- - Direct testing of SVGA adapters turned off by default, `scan'
+2.11(03-May-97) - Yet another cleanup, now including also the documentation.
+ - Direct testing of SVGA adapters turned off by default, ``scan``
offered explicitly on the prompt line.
- Removed the doc section describing adding of new probing
functions as I try to get rid of _all_ hardware probing here.
-2.12 (25-May-98)- Added support for VESA frame buffer graphics.
-2.13 (14-May-99)- Minor documentation fixes.
+2.12(25-May-98) Added support for VESA frame buffer graphics.
+2.13(14-May-99) Minor documentation fixes.
+=============== ================================================================
diff --git a/Documentation/tee.txt b/Documentation/tee.txt
index 7185993..56ea85f 100644
--- a/Documentation/tee.txt
+++ b/Documentation/tee.txt
@@ -1,4 +1,7 @@
+=============
TEE subsystem
+=============
+
This document describes the TEE subsystem in Linux.
A TEE (Trusted Execution Environment) is a trusted OS running in some
@@ -80,27 +83,27 @@
TEE API.
Picture of the relationship between the different components in the
-OP-TEE architecture.
+OP-TEE architecture::
- User space Kernel Secure world
- ~~~~~~~~~~ ~~~~~~ ~~~~~~~~~~~~
- +--------+ +-------------+
- | Client | | Trusted |
- +--------+ | Application |
- /\ +-------------+
- || +----------+ /\
- || |tee- | ||
- || |supplicant| \/
- || +----------+ +-------------+
- \/ /\ | TEE Internal|
- +-------+ || | API |
- + TEE | || +--------+--------+ +-------------+
- | Client| || | TEE | OP-TEE | | OP-TEE |
- | API | \/ | subsys | driver | | Trusted OS |
- +-------+----------------+----+-------+----+-----------+-------------+
- | Generic TEE API | | OP-TEE MSG |
- | IOCTL (TEE_IOC_*) | | SMCCC (OPTEE_SMC_CALL_*) |
- +-----------------------------+ +------------------------------+
+ User space Kernel Secure world
+ ~~~~~~~~~~ ~~~~~~ ~~~~~~~~~~~~
+ +--------+ +-------------+
+ | Client | | Trusted |
+ +--------+ | Application |
+ /\ +-------------+
+ || +----------+ /\
+ || |tee- | ||
+ || |supplicant| \/
+ || +----------+ +-------------+
+ \/ /\ | TEE Internal|
+ +-------+ || | API |
+ + TEE | || +--------+--------+ +-------------+
+ | Client| || | TEE | OP-TEE | | OP-TEE |
+ | API | \/ | subsys | driver | | Trusted OS |
+ +-------+----------------+----+-------+----+-----------+-------------+
+ | Generic TEE API | | OP-TEE MSG |
+ | IOCTL (TEE_IOC_*) | | SMCCC (OPTEE_SMC_CALL_*) |
+ +-----------------------------+ +------------------------------+
RPC (Remote Procedure Call) are requests from secure world to kernel driver
or tee-supplicant. An RPC is identified by a special range of SMCCC return
@@ -109,10 +112,16 @@
tee-supplicant without further involvement of the driver, except switching
shared memory buffer representation.
-References:
+References
+==========
+
[1] https://github.com/OP-TEE/optee_os
+
[2] http://infocenter.arm.com/help/topic/com.arm.doc.den0028a/index.html
+
[3] drivers/tee/optee/optee_smc.h
+
[4] drivers/tee/optee/optee_msg.h
+
[5] http://www.globalplatform.org/specificationsdevice.asp look for
"TEE Client API Specification v1.0" and click download.
diff --git a/Documentation/this_cpu_ops.txt b/Documentation/this_cpu_ops.txt
index 2cbf719..5cb8b88 100644
--- a/Documentation/this_cpu_ops.txt
+++ b/Documentation/this_cpu_ops.txt
@@ -1,5 +1,9 @@
+===================
this_cpu operations
--------------------
+===================
+
+:Author: Christoph Lameter, August 4th, 2014
+:Author: Pranith Kumar, Aug 2nd, 2014
this_cpu operations are a way of optimizing access to per cpu
variables associated with the *currently* executing processor. This is
@@ -39,7 +43,7 @@
The following this_cpu() operations with implied preemption protection
are defined. These operations can be used without worrying about
-preemption and interrupts.
+preemption and interrupts::
this_cpu_read(pcp)
this_cpu_write(pcp, val)
@@ -67,14 +71,14 @@
the processor. So the relocation to the per cpu base is encoded in the
instruction via a segment register prefix.
-For example:
+For example::
DEFINE_PER_CPU(int, x);
int z;
z = this_cpu_read(x);
-results in a single instruction
+results in a single instruction::
mov ax, gs:[x]
@@ -84,16 +88,16 @@
prevent the kernel from moving the thread to a different processor
while the calculation is performed.
-Consider the following this_cpu operation:
+Consider the following this_cpu operation::
this_cpu_inc(x)
-The above results in the following single instruction (no lock prefix!)
+The above results in the following single instruction (no lock prefix!)::
inc gs:[x]
instead of the following operations required if there is no segment
-register:
+register::
int *y;
int cpu;
@@ -121,8 +125,10 @@
counters when the value of a counter is needed.
-Special operations:
--------------------
+Special operations
+------------------
+
+::
y = this_cpu_ptr(&x)
@@ -153,11 +159,15 @@
operations is invalid and will generally be treated like a NULL
pointer dereference.
+::
+
DEFINE_PER_CPU(int, x);
In the context of per cpu operations the above implies that x is a per
cpu variable. Most this_cpu operations take a cpu variable.
+::
+
int __percpu *p = &x;
&x and hence p is the *offset* of a per cpu variable. this_cpu_ptr()
@@ -168,7 +178,7 @@
Operations on a field of a per cpu structure
--------------------------------------------
-Let's say we have a percpu structure
+Let's say we have a percpu structure::
struct s {
int n,m;
@@ -177,14 +187,14 @@
DEFINE_PER_CPU(struct s, p);
-Operations on these fields are straightforward
+Operations on these fields are straightforward::
this_cpu_inc(p.m)
z = this_cpu_cmpxchg(p.m, 0, 1);
-If we have an offset to struct s:
+If we have an offset to struct s::
struct s __percpu *ps = &p;
@@ -194,7 +204,7 @@
The calculation of the pointer may require the use of this_cpu_ptr()
-if we do not make use of this_cpu ops later to manipulate fields:
+if we do not make use of this_cpu ops later to manipulate fields::
struct s *pp;
@@ -206,7 +216,7 @@
Variants of this_cpu ops
--------------------------
+------------------------
this_cpu ops are interrupt safe. Some architectures do not support
these per cpu local operations. In that case the operation must be
@@ -222,7 +232,7 @@
and the scheduler cannot preempt, then they are safe. If any interrupts
still occur while an operation is in progress and if the interrupt too
modifies the variable, then RMW actions can not be guaranteed to be
-safe.
+safe::
__this_cpu_read(pcp)
__this_cpu_write(pcp, val)
@@ -279,7 +289,7 @@
the remote CPU and perform the update to its per cpu area.
To access per-cpu data structure remotely, typically the per_cpu_ptr()
-function is used:
+function is used::
DEFINE_PER_CPU(struct data, datap);
@@ -289,7 +299,7 @@
This makes it explicit that we are getting ready to access a percpu
area remotely.
-You can also do the following to convert the datap offset to an address
+You can also do the following to convert the datap offset to an address::
struct data *p = this_cpu_ptr(&datap);
@@ -305,7 +315,7 @@
share a cache-line but the relaxed synchronization is applied to
only one process updating the cache-line.
-Consider the following example
+Consider the following example::
struct test {
@@ -327,6 +337,3 @@
that most likely will access it. If the processor wakes up and finds a
missing local cache line of a per cpu area, its performance and hence
the wake up times will be affected.
-
-Christoph Lameter, August 4th, 2014
-Pranith Kumar, Aug 2nd, 2014
diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt
index fff8ff6..d4601df 100644
--- a/Documentation/trace/ftrace.txt
+++ b/Documentation/trace/ftrace.txt
@@ -5,10 +5,11 @@
Author: Steven Rostedt <srostedt@redhat.com>
License: The GNU Free Documentation License, Version 1.2
(dual licensed under the GPL v2)
-Reviewers: Elias Oltmanns, Randy Dunlap, Andrew Morton,
- John Kacur, and David Teigland.
+Original Reviewers: Elias Oltmanns, Randy Dunlap, Andrew Morton,
+ John Kacur, and David Teigland.
Written for: 2.6.28-rc2
Updated for: 3.10
+Updated for: 4.13 - Copyright 2017 VMware Inc. Steven Rostedt
Introduction
------------
@@ -26,9 +27,11 @@
One of the most common uses of ftrace is the event tracing.
Through out the kernel is hundreds of static event points that
-can be enabled via the debugfs file system to see what is
+can be enabled via the tracefs file system to see what is
going on in certain parts of the kernel.
+See events.txt for more information.
+
Implementation Details
----------------------
@@ -39,34 +42,47 @@
The File System
---------------
-Ftrace uses the debugfs file system to hold the control files as
+Ftrace uses the tracefs file system to hold the control files as
well as the files to display output.
-When debugfs is configured into the kernel (which selecting any ftrace
-option will do) the directory /sys/kernel/debug will be created. To mount
+When tracefs is configured into the kernel (which selecting any ftrace
+option will do) the directory /sys/kernel/tracing will be created. To mount
this directory, you can add to your /etc/fstab file:
- debugfs /sys/kernel/debug debugfs defaults 0 0
+ tracefs /sys/kernel/tracing tracefs defaults 0 0
Or you can mount it at run time with:
- mount -t debugfs nodev /sys/kernel/debug
+ mount -t tracefs nodev /sys/kernel/tracing
For quicker access to that directory you may want to make a soft link to
it:
- ln -s /sys/kernel/debug /debug
+ ln -s /sys/kernel/tracing /tracing
-Any selected ftrace option will also create a directory called tracing
-within the debugfs. The rest of the document will assume that you are in
-the ftrace directory (cd /sys/kernel/debug/tracing) and will only concentrate
-on the files within that directory and not distract from the content with
-the extended "/sys/kernel/debug/tracing" path name.
+ *** NOTICE ***
+
+Before 4.1, all ftrace tracing control files were within the debugfs
+file system, which is typically located at /sys/kernel/debug/tracing.
+For backward compatibility, when mounting the debugfs file system,
+the tracefs file system will be automatically mounted at:
+
+ /sys/kernel/debug/tracing
+
+All files located in the tracefs file system will be located in that
+debugfs file system directory as well.
+
+ *** NOTICE ***
+
+Any selected ftrace option will also create the tracefs file system.
+The rest of the document will assume that you are in the ftrace directory
+(cd /sys/kernel/tracing) and will only concentrate on the files within that
+directory and not distract from the content with the extended
+"/sys/kernel/tracing" path name.
That's it! (assuming that you have ftrace configured into your kernel)
-After mounting debugfs, you can see a directory called
-"tracing". This directory contains the control and output files
+After mounting tracefs you will have access to the control and output files
of ftrace. Here is a list of some of the key files:
@@ -92,10 +108,20 @@
writing to the ring buffer, the tracing overhead may
still be occurring.
+ The kernel function tracing_off() can be used within the
+ kernel to disable writing to the ring buffer, which will
+ set this file to "0". User space can re-enable tracing by
+ echoing "1" into the file.
+
+ Note, the function and event trigger "traceoff" will also
+ set this file to zero and stop tracing. Which can also
+ be re-enabled by user space using this file.
+
trace:
This file holds the output of the trace in a human
- readable format (described below).
+ readable format (described below). Note, tracing is temporarily
+ disabled while this file is being read (opened).
trace_pipe:
@@ -109,7 +135,8 @@
will not be read again with a sequential read. The
"trace" file is static, and if the tracer is not
adding more data, it will display the same
- information every time it is read.
+ information every time it is read. This file will not
+ disable tracing while being read.
trace_options:
@@ -128,12 +155,14 @@
tracing_max_latency:
Some of the tracers record the max latency.
- For example, the time interrupts are disabled.
- This time is saved in this file. The max trace
- will also be stored, and displayed by "trace".
- A new max trace will only be recorded if the
- latency is greater than the value in this
- file. (in microseconds)
+ For example, the maximum time that interrupts are disabled.
+ The maximum time is saved in this file. The max trace will also be
+ stored, and displayed by "trace". A new max trace will only be
+ recorded if the latency is greater than the value in this file
+ (in microseconds).
+
+ By echoing in a time into this file, no latency will be recorded
+ unless it is greater than the time in this file.
tracing_thresh:
@@ -152,32 +181,34 @@
that the kernel uses for allocation, usually 4 KB in size).
If the last page allocated has room for more bytes
than requested, the rest of the page will be used,
- making the actual allocation bigger than requested.
+ making the actual allocation bigger than requested or shown.
( Note, the size may not be a multiple of the page size
due to buffer management meta-data. )
+ Buffer sizes for individual CPUs may vary
+ (see "per_cpu/cpu0/buffer_size_kb" below), and if they do
+ this file will show "X".
+
buffer_total_size_kb:
This displays the total combined size of all the trace buffers.
free_buffer:
- If a process is performing the tracing, and the ring buffer
- should be shrunk "freed" when the process is finished, even
- if it were to be killed by a signal, this file can be used
- for that purpose. On close of this file, the ring buffer will
- be resized to its minimum size. Having a process that is tracing
- also open this file, when the process exits its file descriptor
- for this file will be closed, and in doing so, the ring buffer
- will be "freed".
+ If a process is performing tracing, and the ring buffer should be
+ shrunk "freed" when the process is finished, even if it were to be
+ killed by a signal, this file can be used for that purpose. On close
+ of this file, the ring buffer will be resized to its minimum size.
+ Having a process that is tracing also open this file, when the process
+ exits its file descriptor for this file will be closed, and in doing so,
+ the ring buffer will be "freed".
It may also stop tracing if disable_on_free option is set.
tracing_cpumask:
- This is a mask that lets the user only trace
- on specified CPUs. The format is a hex string
- representing the CPUs.
+ This is a mask that lets the user only trace on specified CPUs.
+ The format is a hex string representing the CPUs.
set_ftrace_filter:
@@ -190,6 +221,9 @@
to be traced. Echoing names of functions into this file
will limit the trace to only those functions.
+ The functions listed in "available_filter_functions" are what
+ can be written into this file.
+
This interface also allows for commands to be used. See the
"Filter commands" section for more details.
@@ -202,7 +236,14 @@
set_ftrace_pid:
- Have the function tracer only trace a single thread.
+ Have the function tracer only trace the threads whose PID are
+ listed in this file.
+
+ If the "function-fork" option is set, then when a task whose
+ PID is listed in this file forks, the child's PID will
+ automatically be added to this file, and the child will be
+ traced by the function tracer as well. This option will also
+ cause PIDs of tasks that exit to be removed from the file.
set_event_pid:
@@ -217,17 +258,28 @@
set_graph_function:
- Set a "trigger" function where tracing should start
- with the function graph tracer (See the section
- "dynamic ftrace" for more details).
+ Functions listed in this file will cause the function graph
+ tracer to only trace these functions and the functions that
+ they call. (See the section "dynamic ftrace" for more details).
+
+ set_graph_notrace:
+
+ Similar to set_graph_function, but will disable function graph
+ tracing when the function is hit until it exits the function.
+ This makes it possible to ignore tracing functions that are called
+ by a specific function.
available_filter_functions:
- This lists the functions that ftrace
- has processed and can trace. These are the function
- names that you can pass to "set_ftrace_filter" or
- "set_ftrace_notrace". (See the section "dynamic ftrace"
- below for more details.)
+ This lists the functions that ftrace has processed and can trace.
+ These are the function names that you can pass to
+ "set_ftrace_filter" or "set_ftrace_notrace".
+ (See the section "dynamic ftrace" below for more details.)
+
+ dyn_ftrace_total_info:
+
+ This file is for debugging purposes. The number of functions that
+ have been converted to nops and are available to be traced.
enabled_functions:
@@ -250,12 +302,21 @@
an 'I' will be displayed on the same line as the function that
can be overridden.
+ If the architecture supports it, it will also show what callback
+ is being directly called by the function. If the count is greater
+ than 1 it most likely will be ftrace_ops_list_func().
+
+ If the callback of the function jumps to a trampoline that is
+ specific to a the callback and not the standard trampoline,
+ its address will be printed as well as the function that the
+ trampoline calls.
+
function_profile_enabled:
When set it will enable all functions with either the function
- tracer, or if enabled, the function graph tracer. It will
+ tracer, or if configured, the function graph tracer. It will
keep a histogram of the number of functions that were called
- and if run with the function graph tracer, it will also keep
+ and if the function graph tracer was configured, it will also keep
track of the time spent in those functions. The histogram
content can be displayed in the files:
@@ -283,12 +344,11 @@
printk_formats:
This is for tools that read the raw format files. If an event in
- the ring buffer references a string (currently only trace_printk()
- does this), only a pointer to the string is recorded into the buffer
- and not the string itself. This prevents tools from knowing what
- that string was. This file displays the string and address for
- the string allowing tools to map the pointers to what the
- strings were.
+ the ring buffer references a string, only a pointer to the string
+ is recorded into the buffer and not the string itself. This prevents
+ tools from knowing what that string was. This file displays the string
+ and address for the string allowing tools to map the pointers to what
+ the strings were.
saved_cmdlines:
@@ -298,6 +358,22 @@
comms for events. If a pid for a comm is not listed, then
"<...>" is displayed in the output.
+ If the option "record-cmd" is set to "0", then comms of tasks
+ will not be saved during recording. By default, it is enabled.
+
+ saved_cmdlines_size:
+
+ By default, 128 comms are saved (see "saved_cmdlines" above). To
+ increase or decrease the amount of comms that are cached, echo
+ in a the number of comms to cache, into this file.
+
+ saved_tgids:
+
+ If the option "record-tgid" is set, on each scheduling context switch
+ the Task Group ID of a task is saved in a table mapping the PID of
+ the thread to its TGID. By default, the "record-tgid" option is
+ disabled.
+
snapshot:
This displays the "snapshot" buffer and also lets the user
@@ -336,6 +412,9 @@
# cat trace_clock
[local] global counter x86-tsc
+ The clock with the square brackets around it is the one
+ in effect.
+
local: Default clock, but may not be in sync across CPUs
global: This clock is in sync with all CPUs but may
@@ -448,6 +527,23 @@
See events.txt for more information.
+ set_event:
+
+ By echoing in the event into this file, will enable that event.
+
+ See events.txt for more information.
+
+ available_events:
+
+ A list of events that can be enabled in tracing.
+
+ See events.txt for more information.
+
+ hwlat_detector:
+
+ Directory for the Hardware Latency Detector.
+ See "Hardware Latency Detector" section below.
+
per_cpu:
This is a directory that contains the trace per_cpu information.
@@ -539,13 +635,25 @@
to draw a graph of function calls similar to C code
source.
+ "blk"
+
+ The block tracer. The tracer used by the blktrace user
+ application.
+
+ "hwlat"
+
+ The Hardware Latency tracer is used to detect if the hardware
+ produces any latency. See "Hardware Latency Detector" section
+ below.
+
"irqsoff"
Traces the areas that disable interrupts and saves
the trace with the longest max latency.
See tracing_max_latency. When a new max is recorded,
it replaces the old trace. It is best to view this
- trace with the latency-format option enabled.
+ trace with the latency-format option enabled, which
+ happens automatically when the tracer is selected.
"preemptoff"
@@ -571,6 +679,26 @@
RT tasks (as the current "wakeup" does). This is useful
for those interested in wake up timings of RT tasks.
+ "wakeup_dl"
+
+ Traces and records the max latency that it takes for
+ a SCHED_DEADLINE task to be woken (as the "wakeup" and
+ "wakeup_rt" does).
+
+ "mmiotrace"
+
+ A special tracer that is used to trace binary module.
+ It will trace all the calls that a module makes to the
+ hardware. Everything it writes and reads from the I/O
+ as well.
+
+ "branch"
+
+ This tracer can be configured when tracing likely/unlikely
+ calls within the kernel. It will trace when a likely and
+ unlikely branch is hit and if it was correct in its prediction
+ of being correct.
+
"nop"
This is the "trace nothing" tracer. To remove all
@@ -582,7 +710,7 @@
----------------------------
Here are typical examples of using the tracers when controlling
-them only with the debugfs interface (without using any
+them only with the tracefs interface (without using any
user-land utilities).
Output format:
@@ -674,7 +802,7 @@
This shows that the current tracer is "irqsoff" tracing the time
for which interrupts were disabled. It gives the trace version (which
never changes) and the version of the kernel upon which this was executed on
-(3.10). Then it displays the max latency in microseconds (259 us). The number
+(3.8). Then it displays the max latency in microseconds (259 us). The number
of trace entries displayed and the total number (both are four: #4/4).
VP, KP, SP, and HP are always zero and are reserved for later use.
#P is the number of online CPUs (#P:4).
@@ -709,6 +837,8 @@
'.' otherwise.
hardirq/softirq:
+ 'Z' - NMI occurred inside a hardirq
+ 'z' - NMI is running
'H' - hard irq occurred inside a softirq.
'h' - hard irq is running
's' - soft irq is running
@@ -757,24 +887,24 @@
nobin
noblock
trace_printk
-nobranch
annotate
nouserstacktrace
nosym-userobj
noprintk-msg-only
context-info
nolatency-format
-sleep-time
-graph-time
record-cmd
+norecord-tgid
overwrite
nodisable_on_free
irq-info
markers
noevent-fork
function-trace
+nofunction-fork
nodisplay-graph
nostacktrace
+nobranch
To disable one of the options, echo in the option prepended with
"no".
@@ -830,8 +960,6 @@
trace_printk - Can disable trace_printk() from writing into the buffer.
- branch - Enable branch tracing with the tracer.
-
annotate - It is sometimes confusing when the CPU buffers are full
and one CPU buffer had a lot of events recently, thus
a shorter time frame, were another CPU may have only had
@@ -850,7 +978,8 @@
<idle>-0 [001] .Ns3 21169.031485: sub_preempt_count <-_raw_spin_unlock
userstacktrace - This option changes the trace. It records a
- stacktrace of the current userspace thread.
+ stacktrace of the current user space thread after
+ each trace event.
sym-userobj - when user stacktrace are enabled, look up which
object the address belongs to, and print a
@@ -873,29 +1002,21 @@
context-info - Show only the event data. Hides the comm, PID,
timestamp, CPU, and other useful data.
- latency-format - This option changes the trace. When
- it is enabled, the trace displays
- additional information about the
- latencies, as described in "Latency
- trace format".
-
- sleep-time - When running function graph tracer, to include
- the time a task schedules out in its function.
- When enabled, it will account time the task has been
- scheduled out as part of the function call.
-
- graph-time - When running function profiler with function graph tracer,
- to include the time to call nested functions. When this is
- not set, the time reported for the function will only
- include the time the function itself executed for, not the
- time for functions that it called.
+ latency-format - This option changes the trace output. When it is enabled,
+ the trace displays additional information about the
+ latency, as described in "Latency trace format".
record-cmd - When any event or tracer is enabled, a hook is enabled
- in the sched_switch trace point to fill comm cache
+ in the sched_switch trace point to fill comm cache
with mapped pids and comms. But this may cause some
overhead, and if you only care about pids, and not the
name of the task, disabling this option can lower the
- impact of tracing.
+ impact of tracing. See "saved_cmdlines".
+
+ record-tgid - When any event or tracer is enabled, a hook is enabled
+ in the sched_switch trace point to fill the cache of
+ mapped Thread Group IDs (TGID) mapping to pids. See
+ "saved_tgids".
overwrite - This controls what happens when the trace buffer is
full. If "1" (default), the oldest events are
@@ -935,19 +1056,98 @@
functions. This keeps the overhead of the tracer down
when performing latency tests.
+ function-fork - When set, tasks with PIDs listed in set_ftrace_pid will
+ have the PIDs of their children added to set_ftrace_pid
+ when those tasks fork. Also, when tasks with PIDs in
+ set_ftrace_pid exit, their PIDs will be removed from the
+ file.
+
display-graph - When set, the latency tracers (irqsoff, wakeup, etc) will
use function graph tracing instead of function tracing.
- stacktrace - This is one of the options that changes the trace
- itself. When a trace is recorded, so is the stack
- of functions. This allows for back traces of
- trace sites.
+ stacktrace - When set, a stack trace is recorded after any trace event
+ is recorded.
+
+ branch - Enable branch tracing with the tracer. This enables branch
+ tracer along with the currently set tracer. Enabling this
+ with the "nop" tracer is the same as just enabling the
+ "branch" tracer.
Note: Some tracers have their own options. They only appear in this
file when the tracer is active. They always appear in the
options directory.
+Here are the per tracer options:
+
+Options for function tracer:
+
+ func_stack_trace - When set, a stack trace is recorded after every
+ function that is recorded. NOTE! Limit the functions
+ that are recorded before enabling this, with
+ "set_ftrace_filter" otherwise the system performance
+ will be critically degraded. Remember to disable
+ this option before clearing the function filter.
+
+Options for function_graph tracer:
+
+ Since the function_graph tracer has a slightly different output
+ it has its own options to control what is displayed.
+
+ funcgraph-overrun - When set, the "overrun" of the graph stack is
+ displayed after each function traced. The
+ overrun, is when the stack depth of the calls
+ is greater than what is reserved for each task.
+ Each task has a fixed array of functions to
+ trace in the call graph. If the depth of the
+ calls exceeds that, the function is not traced.
+ The overrun is the number of functions missed
+ due to exceeding this array.
+
+ funcgraph-cpu - When set, the CPU number of the CPU where the trace
+ occurred is displayed.
+
+ funcgraph-overhead - When set, if the function takes longer than
+ A certain amount, then a delay marker is
+ displayed. See "delay" above, under the
+ header description.
+
+ funcgraph-proc - Unlike other tracers, the process' command line
+ is not displayed by default, but instead only
+ when a task is traced in and out during a context
+ switch. Enabling this options has the command
+ of each process displayed at every line.
+
+ funcgraph-duration - At the end of each function (the return)
+ the duration of the amount of time in the
+ function is displayed in microseconds.
+
+ funcgraph-abstime - When set, the timestamp is displayed at each
+ line.
+
+ funcgraph-irqs - When disabled, functions that happen inside an
+ interrupt will not be traced.
+
+ funcgraph-tail - When set, the return event will include the function
+ that it represents. By default this is off, and
+ only a closing curly bracket "}" is displayed for
+ the return of a function.
+
+ sleep-time - When running function graph tracer, to include
+ the time a task schedules out in its function.
+ When enabled, it will account time the task has been
+ scheduled out as part of the function call.
+
+ graph-time - When running function profiler with function graph tracer,
+ to include the time to call nested functions. When this is
+ not set, the time reported for the function will only
+ include the time the function itself executed for, not the
+ time for functions that it called.
+
+Options for blk tracer:
+
+ blk_classic - Shows a more minimalistic output.
+
irqsoff
-------
@@ -1711,6 +1911,85 @@
<idle>-0 2d..3 6us : 0:120:R ==> [002] 5882: 94:R sleep
+Hardware Latency Detector
+-------------------------
+
+The hardware latency detector is executed by enabling the "hwlat" tracer.
+
+NOTE, this tracer will affect the performance of the system as it will
+periodically make a CPU constantly busy with interrupts disabled.
+
+ # echo hwlat > current_tracer
+ # sleep 100
+ # cat trace
+# tracer: hwlat
+#
+# _-----=> irqs-off
+# / _----=> need-resched
+# | / _---=> hardirq/softirq
+# || / _--=> preempt-depth
+# ||| / delay
+# TASK-PID CPU# |||| TIMESTAMP FUNCTION
+# | | | |||| | |
+ <...>-3638 [001] d... 19452.055471: #1 inner/outer(us): 12/14 ts:1499801089.066141940
+ <...>-3638 [003] d... 19454.071354: #2 inner/outer(us): 11/9 ts:1499801091.082164365
+ <...>-3638 [002] dn.. 19461.126852: #3 inner/outer(us): 12/9 ts:1499801098.138150062
+ <...>-3638 [001] d... 19488.340960: #4 inner/outer(us): 8/12 ts:1499801125.354139633
+ <...>-3638 [003] d... 19494.388553: #5 inner/outer(us): 8/12 ts:1499801131.402150961
+ <...>-3638 [003] d... 19501.283419: #6 inner/outer(us): 0/12 ts:1499801138.297435289 nmi-total:4 nmi-count:1
+
+
+The above output is somewhat the same in the header. All events will have
+interrupts disabled 'd'. Under the FUNCTION title there is:
+
+ #1 - This is the count of events recorded that were greater than the
+ tracing_threshold (See below).
+
+ inner/outer(us): 12/14
+
+ This shows two numbers as "inner latency" and "outer latency". The test
+ runs in a loop checking a timestamp twice. The latency detected within
+ the two timestamps is the "inner latency" and the latency detected
+ after the previous timestamp and the next timestamp in the loop is
+ the "outer latency".
+
+ ts:1499801089.066141940
+
+ The absolute timestamp that the event happened.
+
+ nmi-total:4 nmi-count:1
+
+ On architectures that support it, if an NMI comes in during the
+ test, the time spent in NMI is reported in "nmi-total" (in
+ microseconds).
+
+ All architectures that have NMIs will show the "nmi-count" if an
+ NMI comes in during the test.
+
+hwlat files:
+
+ tracing_threshold - This gets automatically set to "10" to represent 10
+ microseconds. This is the threshold of latency that
+ needs to be detected before the trace will be recorded.
+
+ Note, when hwlat tracer is finished (another tracer is
+ written into "current_tracer"), the original value for
+ tracing_threshold is placed back into this file.
+
+ hwlat_detector/width - The length of time the test runs with interrupts
+ disabled.
+
+ hwlat_detector/window - The length of time of the window which the test
+ runs. That is, the test will run for "width"
+ microseconds per "window" microseconds
+
+ tracing_cpumask - When the test is started. A kernel thread is created that
+ runs the test. This thread will alternate between CPUs
+ listed in the tracing_cpumask between each period
+ (one "window"). To limit the test to specific CPUs
+ set the mask in this file to only the CPUs that the test
+ should run on.
+
function
--------
@@ -1821,15 +2100,15 @@
#define STR(x) _STR(x)
#define MAX_PATH 256
-const char *find_debugfs(void)
+const char *find_tracefs(void)
{
- static char debugfs[MAX_PATH+1];
- static int debugfs_found;
+ static char tracefs[MAX_PATH+1];
+ static int tracefs_found;
char type[100];
FILE *fp;
- if (debugfs_found)
- return debugfs;
+ if (tracefs_found)
+ return tracefs;
if ((fp = fopen("/proc/mounts","r")) == NULL) {
perror("/proc/mounts");
@@ -1839,27 +2118,27 @@
while (fscanf(fp, "%*s %"
STR(MAX_PATH)
"s %99s %*s %*d %*d\n",
- debugfs, type) == 2) {
- if (strcmp(type, "debugfs") == 0)
+ tracefs, type) == 2) {
+ if (strcmp(type, "tracefs") == 0)
break;
}
fclose(fp);
- if (strcmp(type, "debugfs") != 0) {
- fprintf(stderr, "debugfs not mounted");
+ if (strcmp(type, "tracefs") != 0) {
+ fprintf(stderr, "tracefs not mounted");
return NULL;
}
- strcat(debugfs, "/tracing/");
- debugfs_found = 1;
+ strcat(tracefs, "/tracing/");
+ tracefs_found = 1;
- return debugfs;
+ return tracefs;
}
const char *tracing_file(const char *file_name)
{
static char trace_file[MAX_PATH+1];
- snprintf(trace_file, MAX_PATH, "%s/%s", find_debugfs(), file_name);
+ snprintf(trace_file, MAX_PATH, "%s/%s", find_tracefs(), file_name);
return trace_file;
}
@@ -1898,12 +2177,12 @@
------
#!/bin/bash
-debugfs=`sed -ne 's/^debugfs \(.*\) debugfs.*/\1/p' /proc/mounts`
-echo nop > $debugfs/tracing/current_tracer
-echo 0 > $debugfs/tracing/tracing_on
-echo $$ > $debugfs/tracing/set_ftrace_pid
-echo function > $debugfs/tracing/current_tracer
-echo 1 > $debugfs/tracing/tracing_on
+tracefs=`sed -ne 's/^tracefs \(.*\) tracefs.*/\1/p' /proc/mounts`
+echo nop > $tracefs/tracing/current_tracer
+echo 0 > $tracefs/tracing/tracing_on
+echo $$ > $tracefs/tracing/set_ftrace_pid
+echo function > $tracefs/tracing/current_tracer
+echo 1 > $tracefs/tracing/tracing_on
exec "$@"
------
@@ -2145,13 +2424,18 @@
At compile time every C file object is run through the
recordmcount program (located in the scripts directory). This
program will parse the ELF headers in the C object to find all
-the locations in the .text section that call mcount. (Note, only
-white listed .text sections are processed, since processing other
-sections like .init.text may cause races due to those sections
-being freed unexpectedly).
+the locations in the .text section that call mcount. Starting
+with gcc verson 4.6, the -mfentry has been added for x86, which
+calls "__fentry__" instead of "mcount". Which is called before
+the creation of the stack frame.
-A new section called "__mcount_loc" is created that holds
-references to all the mcount call sites in the .text section.
+Note, not all sections are traced. They may be prevented by either
+a notrace, or blocked another way and all inline functions are not
+traced. Check the "available_filter_functions" file to see what functions
+can be traced.
+
+A section called "__mcount_loc" is created that holds
+references to all the mcount/fentry call sites in the .text section.
The recordmcount program re-links this section back into the
original object. The final linking stage of the kernel will add all these
references into a single table.
@@ -2679,7 +2963,7 @@
buffer with a spare buffer, and tracing continues in the new
current (=previous spare) buffer.
-The following debugfs files in "tracing" are related to this
+The following tracefs files in "tracing" are related to this
feature:
snapshot:
@@ -2752,7 +3036,7 @@
Instances
---------
-In the debugfs tracing directory is a directory called "instances".
+In the tracefs tracing directory is a directory called "instances".
This directory can have new directories created inside of it using
mkdir, and removing directories with rmdir. The directory created
with mkdir in this directory will already contain files and other
diff --git a/Documentation/translations/ko_KR/memory-barriers.txt b/Documentation/translations/ko_KR/memory-barriers.txt
index c6f4ead..38310dc 100644
--- a/Documentation/translations/ko_KR/memory-barriers.txt
+++ b/Documentation/translations/ko_KR/memory-barriers.txt
@@ -523,11 +523,11 @@
즉, ACQUIRE 는 최소한의 "취득" 동작처럼, 그리고 RELEASE 는 최소한의 "공개"
처럼 동작한다는 의미입니다.
-atomic_ops.txt 에서 설명되는 어토믹 오퍼레이션들 중에는 완전히 순서잡힌 것들과
-(배리어를 사용하지 않는) 완화된 순서의 것들 외에 ACQUIRE 와 RELEASE 부류의
-것들도 존재합니다. 로드와 스토어를 모두 수행하는 조합된 어토믹 오퍼레이션에서,
-ACQUIRE 는 해당 오퍼레이션의 로드 부분에만 적용되고 RELEASE 는 해당
-오퍼레이션의 스토어 부분에만 적용됩니다.
+core-api/atomic_ops.rst 에서 설명되는 어토믹 오퍼레이션들 중에는 완전히
+순서잡힌 것들과 (배리어를 사용하지 않는) 완화된 순서의 것들 외에 ACQUIRE 와
+RELEASE 부류의 것들도 존재합니다. 로드와 스토어를 모두 수행하는 조합된 어토믹
+오퍼레이션에서, ACQUIRE 는 해당 오퍼레이션의 로드 부분에만 적용되고 RELEASE 는
+해당 오퍼레이션의 스토어 부분에만 적용됩니다.
메모리 배리어들은 두 CPU 간, 또는 CPU 와 디바이스 간에 상호작용의 가능성이 있을
때에만 필요합니다. 만약 어떤 코드에 그런 상호작용이 없을 것이 보장된다면, 해당
@@ -1848,7 +1848,7 @@
이 코드는 객체의 업데이트된 death 마크가 레퍼런스 카운터 감소 동작
*전에* 보일 것을 보장합니다.
- 더 많은 정보를 위해선 Documentation/atomic_ops.txt 문서를 참고하세요.
+ 더 많은 정보를 위해선 Documentation/core-api/atomic_ops.rst 문서를 참고하세요.
어디서 이것들을 사용해야 할지 궁금하다면 "어토믹 오퍼레이션" 서브섹션을
참고하세요.
@@ -2550,7 +2550,7 @@
있는데, 그런 경우에 이 특수 메모리 배리어 도구들은 no-op 이 되어 실질적으로
아무일도 하지 않습니다.
-더 많은 내용을 위해선 Documentation/atomic_ops.txt 를 참고하세요.
+더 많은 내용을 위해선 Documentation/core-api/atomic_ops.rst 를 참고하세요.
디바이스 액세스
diff --git a/Documentation/unaligned-memory-access.txt b/Documentation/unaligned-memory-access.txt
index 3f76c0c..51b4ff0 100644
--- a/Documentation/unaligned-memory-access.txt
+++ b/Documentation/unaligned-memory-access.txt
@@ -1,6 +1,15 @@
+=========================
UNALIGNED MEMORY ACCESSES
=========================
+:Author: Daniel Drake <dsd@gentoo.org>,
+:Author: Johannes Berg <johannes@sipsolutions.net>
+
+:With help from: Alan Cox, Avuton Olrich, Heikki Orsila, Jan Engelhardt,
+ Kyle McMartin, Kyle Moffett, Randy Dunlap, Robert Hancock, Uli Kunitz,
+ Vadim Lobanov
+
+
Linux runs on a wide variety of architectures which have varying behaviour
when it comes to memory access. This document presents some details about
unaligned accesses, why you need to write code that doesn't cause them,
@@ -73,7 +82,7 @@
Fortunately things are not too complex, as in most cases, the compiler
ensures that things will work for you. For example, take the following
-structure:
+structure::
struct foo {
u16 field1;
@@ -106,7 +115,7 @@
that you could reorder the fields in the structure in order to place fields
where padding would otherwise be inserted, and hence reduce the overall
resident memory size of structure instances. The optimal layout of the
-above example is:
+above example is::
struct foo {
u32 field2;
@@ -139,21 +148,21 @@
With the above in mind, let's move onto a real life example of a function
that can cause an unaligned memory access. The following function taken
from include/linux/etherdevice.h is an optimized routine to compare two
-ethernet MAC addresses for equality.
+ethernet MAC addresses for equality::
-bool ether_addr_equal(const u8 *addr1, const u8 *addr2)
-{
-#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+ bool ether_addr_equal(const u8 *addr1, const u8 *addr2)
+ {
+ #ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
u32 fold = ((*(const u32 *)addr1) ^ (*(const u32 *)addr2)) |
((*(const u16 *)(addr1 + 4)) ^ (*(const u16 *)(addr2 + 4)));
return fold == 0;
-#else
+ #else
const u16 *a = (const u16 *)addr1;
const u16 *b = (const u16 *)addr2;
return ((a[0] ^ b[0]) | (a[1] ^ b[1]) | (a[2] ^ b[2])) == 0;
-#endif
-}
+ #endif
+ }
In the above function, when the hardware has efficient unaligned access
capability, there is no issue with this code. But when the hardware isn't
@@ -171,7 +180,8 @@
which is true almost all of the time in ethernet networking context.
-Here is another example of some code that could cause unaligned accesses:
+Here is another example of some code that could cause unaligned accesses::
+
void myfunc(u8 *data, u32 value)
{
[...]
@@ -184,6 +194,7 @@
In summary, the 2 main scenarios where you may run into unaligned access
problems involve:
+
1. Casting variables to types of different lengths
2. Pointer arithmetic followed by access to at least 2 bytes of data
@@ -195,7 +206,7 @@
put_unaligned() macros provided by the <asm/unaligned.h> header file.
Going back to an earlier example of code that potentially causes unaligned
-access:
+access::
void myfunc(u8 *data, u32 value)
{
@@ -204,7 +215,7 @@
[...]
}
-To avoid the unaligned memory access, you would rewrite it as follows:
+To avoid the unaligned memory access, you would rewrite it as follows::
void myfunc(u8 *data, u32 value)
{
@@ -215,7 +226,7 @@
}
The get_unaligned() macro works similarly. Assuming 'data' is a pointer to
-memory and you wish to avoid unaligned access, its usage is as follows:
+memory and you wish to avoid unaligned access, its usage is as follows::
u32 value = get_unaligned((u32 *) data);
@@ -245,18 +256,10 @@
4*n+2 or non-ethernet hardware, this can be a problem, and it is then
required to copy the incoming frame into an aligned buffer. Because this is
unnecessary on architectures that can do unaligned accesses, the code can be
-made dependent on CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS like so:
+made dependent on CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS like so::
-#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
- skb = original skb
-#else
- skb = copy skb
-#endif
-
---
-Authors: Daniel Drake <dsd@gentoo.org>,
- Johannes Berg <johannes@sipsolutions.net>
-With help from: Alan Cox, Avuton Olrich, Heikki Orsila, Jan Engelhardt,
-Kyle McMartin, Kyle Moffett, Randy Dunlap, Robert Hancock, Uli Kunitz,
-Vadim Lobanov
-
+ #ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+ skb = original skb
+ #else
+ skb = copy skb
+ #endif
diff --git a/Documentation/vfio-mediated-device.txt b/Documentation/vfio-mediated-device.txt
index e5e57b4..1b39503 100644
--- a/Documentation/vfio-mediated-device.txt
+++ b/Documentation/vfio-mediated-device.txt
@@ -1,14 +1,17 @@
-/*
- * VFIO Mediated devices
- *
- * Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved.
- * Author: Neo Jia <cjia@nvidia.com>
- * Kirti Wankhede <kwankhede@nvidia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+.. include:: <isonum.txt>
+
+=====================
+VFIO Mediated devices
+=====================
+
+:Copyright: |copy| 2016, NVIDIA CORPORATION. All rights reserved.
+:Author: Neo Jia <cjia@nvidia.com>
+:Author: Kirti Wankhede <kwankhede@nvidia.com>
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License version 2 as
+published by the Free Software Foundation.
+
Virtual Function I/O (VFIO) Mediated devices[1]
===============================================
@@ -42,7 +45,7 @@
The following high-level block diagram shows the main components and interfaces
in the VFIO mediated driver framework. The diagram shows NVIDIA, Intel, and IBM
-devices as examples, as these devices are the first devices to use this module.
+devices as examples, as these devices are the first devices to use this module::
+---------------+
| |
@@ -91,7 +94,7 @@
------------------------------------------------
The registration interface for a mediated bus driver provides the following
-structure to represent a mediated device's driver:
+structure to represent a mediated device's driver::
/*
* struct mdev_driver [2] - Mediated device's driver
@@ -110,14 +113,14 @@
A mediated bus driver for mdev should use this structure in the function calls
to register and unregister itself with the core driver:
-* Register:
+* Register::
- extern int mdev_register_driver(struct mdev_driver *drv,
+ extern int mdev_register_driver(struct mdev_driver *drv,
struct module *owner);
-* Unregister:
+* Unregister::
- extern void mdev_unregister_driver(struct mdev_driver *drv);
+ extern void mdev_unregister_driver(struct mdev_driver *drv);
The mediated bus driver is responsible for adding mediated devices to the VFIO
group when devices are bound to the driver and removing mediated devices from
@@ -152,15 +155,15 @@
* mmap: mmap emulation callback
A driver should use the mdev_parent_ops structure in the function call to
-register itself with the mdev core driver:
+register itself with the mdev core driver::
-extern int mdev_register_device(struct device *dev,
- const struct mdev_parent_ops *ops);
+ extern int mdev_register_device(struct device *dev,
+ const struct mdev_parent_ops *ops);
However, the mdev_parent_ops structure is not required in the function call
-that a driver should use to unregister itself with the mdev core driver:
+that a driver should use to unregister itself with the mdev core driver::
-extern void mdev_unregister_device(struct device *dev);
+ extern void mdev_unregister_device(struct device *dev);
Mediated Device Management Interface Through sysfs
@@ -183,30 +186,32 @@
Directories and files under the sysfs for Each Physical Device
--------------------------------------------------------------
-|- [parent physical device]
-|--- Vendor-specific-attributes [optional]
-|--- [mdev_supported_types]
-| |--- [<type-id>]
-| | |--- create
-| | |--- name
-| | |--- available_instances
-| | |--- device_api
-| | |--- description
-| | |--- [devices]
-| |--- [<type-id>]
-| | |--- create
-| | |--- name
-| | |--- available_instances
-| | |--- device_api
-| | |--- description
-| | |--- [devices]
-| |--- [<type-id>]
-| |--- create
-| |--- name
-| |--- available_instances
-| |--- device_api
-| |--- description
-| |--- [devices]
+::
+
+ |- [parent physical device]
+ |--- Vendor-specific-attributes [optional]
+ |--- [mdev_supported_types]
+ | |--- [<type-id>]
+ | | |--- create
+ | | |--- name
+ | | |--- available_instances
+ | | |--- device_api
+ | | |--- description
+ | | |--- [devices]
+ | |--- [<type-id>]
+ | | |--- create
+ | | |--- name
+ | | |--- available_instances
+ | | |--- device_api
+ | | |--- description
+ | | |--- [devices]
+ | |--- [<type-id>]
+ | |--- create
+ | |--- name
+ | |--- available_instances
+ | |--- device_api
+ | |--- description
+ | |--- [devices]
* [mdev_supported_types]
@@ -219,12 +224,12 @@
The [<type-id>] name is created by adding the device driver string as a prefix
to the string provided by the vendor driver. This format of this name is as
- follows:
+ follows::
sprintf(buf, "%s-%s", dev_driver_string(parent->dev), group->name);
(or using mdev_parent_dev(mdev) to arrive at the parent device outside
- of the core mdev code)
+ of the core mdev code)
* device_api
@@ -239,7 +244,7 @@
* [device]
This directory contains links to the devices of type <type-id> that have been
-created.
+ created.
* name
@@ -253,21 +258,25 @@
Directories and Files Under the sysfs for Each mdev Device
----------------------------------------------------------
-|- [parent phy device]
-|--- [$MDEV_UUID]
+::
+
+ |- [parent phy device]
+ |--- [$MDEV_UUID]
|--- remove
|--- mdev_type {link to its type}
|--- vendor-specific-attributes [optional]
* remove (write only)
+
Writing '1' to the 'remove' file destroys the mdev device. The vendor driver can
fail the remove() callback if that device is active and the vendor driver
doesn't support hot unplug.
-Example:
+Example::
+
# echo 1 > /sys/bus/mdev/devices/$mdev_UUID/remove
-Mediated device Hot plug:
+Mediated device Hot plug
------------------------
Mediated devices can be created and assigned at runtime. The procedure to hot
@@ -277,13 +286,13 @@
=====================================
The following APIs are provided for translating user pfn to host pfn in a VFIO
-driver:
+driver::
-extern int vfio_pin_pages(struct device *dev, unsigned long *user_pfn,
- int npage, int prot, unsigned long *phys_pfn);
+ extern int vfio_pin_pages(struct device *dev, unsigned long *user_pfn,
+ int npage, int prot, unsigned long *phys_pfn);
-extern int vfio_unpin_pages(struct device *dev, unsigned long *user_pfn,
- int npage);
+ extern int vfio_unpin_pages(struct device *dev, unsigned long *user_pfn,
+ int npage);
These functions call back into the back-end IOMMU module by using the pin_pages
and unpin_pages callbacks of the struct vfio_iommu_driver_ops[4]. Currently
@@ -304,81 +313,80 @@
This step creates a dummy device, /sys/devices/virtual/mtty/mtty/
- Files in this device directory in sysfs are similar to the following:
+ Files in this device directory in sysfs are similar to the following::
- # tree /sys/devices/virtual/mtty/mtty/
- /sys/devices/virtual/mtty/mtty/
- |-- mdev_supported_types
- | |-- mtty-1
- | | |-- available_instances
- | | |-- create
- | | |-- device_api
- | | |-- devices
- | | `-- name
- | `-- mtty-2
- | |-- available_instances
- | |-- create
- | |-- device_api
- | |-- devices
- | `-- name
- |-- mtty_dev
- | `-- sample_mtty_dev
- |-- power
- | |-- autosuspend_delay_ms
- | |-- control
- | |-- runtime_active_time
- | |-- runtime_status
- | `-- runtime_suspended_time
- |-- subsystem -> ../../../../class/mtty
- `-- uevent
+ # tree /sys/devices/virtual/mtty/mtty/
+ /sys/devices/virtual/mtty/mtty/
+ |-- mdev_supported_types
+ | |-- mtty-1
+ | | |-- available_instances
+ | | |-- create
+ | | |-- device_api
+ | | |-- devices
+ | | `-- name
+ | `-- mtty-2
+ | |-- available_instances
+ | |-- create
+ | |-- device_api
+ | |-- devices
+ | `-- name
+ |-- mtty_dev
+ | `-- sample_mtty_dev
+ |-- power
+ | |-- autosuspend_delay_ms
+ | |-- control
+ | |-- runtime_active_time
+ | |-- runtime_status
+ | `-- runtime_suspended_time
+ |-- subsystem -> ../../../../class/mtty
+ `-- uevent
2. Create a mediated device by using the dummy device that you created in the
- previous step.
+ previous step::
- # echo "83b8f4f2-509f-382f-3c1e-e6bfe0fa1001" > \
+ # echo "83b8f4f2-509f-382f-3c1e-e6bfe0fa1001" > \
/sys/devices/virtual/mtty/mtty/mdev_supported_types/mtty-2/create
-3. Add parameters to qemu-kvm.
+3. Add parameters to qemu-kvm::
- -device vfio-pci,\
- sysfsdev=/sys/bus/mdev/devices/83b8f4f2-509f-382f-3c1e-e6bfe0fa1001
+ -device vfio-pci,\
+ sysfsdev=/sys/bus/mdev/devices/83b8f4f2-509f-382f-3c1e-e6bfe0fa1001
4. Boot the VM.
In the Linux guest VM, with no hardware on the host, the device appears
- as follows:
+ as follows::
- # lspci -s 00:05.0 -xxvv
- 00:05.0 Serial controller: Device 4348:3253 (rev 10) (prog-if 02 [16550])
- Subsystem: Device 4348:3253
- Physical Slot: 5
- Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Interrupt: pin A routed to IRQ 10
- Region 0: I/O ports at c150 [size=8]
- Region 1: I/O ports at c158 [size=8]
- Kernel driver in use: serial
- 00: 48 43 53 32 01 00 00 02 10 02 00 07 00 00 00 00
- 10: 51 c1 00 00 59 c1 00 00 00 00 00 00 00 00 00 00
- 20: 00 00 00 00 00 00 00 00 00 00 00 00 48 43 53 32
- 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
+ # lspci -s 00:05.0 -xxvv
+ 00:05.0 Serial controller: Device 4348:3253 (rev 10) (prog-if 02 [16550])
+ Subsystem: Device 4348:3253
+ Physical Slot: 5
+ Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
+ Stepping- SERR- FastB2B- DisINTx-
+ Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
+ <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Interrupt: pin A routed to IRQ 10
+ Region 0: I/O ports at c150 [size=8]
+ Region 1: I/O ports at c158 [size=8]
+ Kernel driver in use: serial
+ 00: 48 43 53 32 01 00 00 02 10 02 00 07 00 00 00 00
+ 10: 51 c1 00 00 59 c1 00 00 00 00 00 00 00 00 00 00
+ 20: 00 00 00 00 00 00 00 00 00 00 00 00 48 43 53 32
+ 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
- In the Linux guest VM, dmesg output for the device is as follows:
+ In the Linux guest VM, dmesg output for the device is as follows:
- serial 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ
-10
- 0000:00:05.0: ttyS1 at I/O 0xc150 (irq = 10) is a 16550A
- 0000:00:05.0: ttyS2 at I/O 0xc158 (irq = 10) is a 16550A
+ serial 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
+ 0000:00:05.0: ttyS1 at I/O 0xc150 (irq = 10) is a 16550A
+ 0000:00:05.0: ttyS2 at I/O 0xc158 (irq = 10) is a 16550A
-5. In the Linux guest VM, check the serial ports.
+5. In the Linux guest VM, check the serial ports::
- # setserial -g /dev/ttyS*
- /dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4
- /dev/ttyS1, UART: 16550A, Port: 0xc150, IRQ: 10
- /dev/ttyS2, UART: 16550A, Port: 0xc158, IRQ: 10
+ # setserial -g /dev/ttyS*
+ /dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4
+ /dev/ttyS1, UART: 16550A, Port: 0xc150, IRQ: 10
+ /dev/ttyS2, UART: 16550A, Port: 0xc158, IRQ: 10
6. Using minicom or any terminal emulation program, open port /dev/ttyS1 or
/dev/ttyS2 with hardware flow control disabled.
@@ -388,14 +396,14 @@
Data is loop backed from hosts mtty driver.
-8. Destroy the mediated device that you created.
+8. Destroy the mediated device that you created::
- # echo 1 > /sys/bus/mdev/devices/83b8f4f2-509f-382f-3c1e-e6bfe0fa1001/remove
+ # echo 1 > /sys/bus/mdev/devices/83b8f4f2-509f-382f-3c1e-e6bfe0fa1001/remove
References
==========
-[1] See Documentation/vfio.txt for more information on VFIO.
-[2] struct mdev_driver in include/linux/mdev.h
-[3] struct mdev_parent_ops in include/linux/mdev.h
-[4] struct vfio_iommu_driver_ops in include/linux/vfio.h
+1. See Documentation/vfio.txt for more information on VFIO.
+2. struct mdev_driver in include/linux/mdev.h
+3. struct mdev_parent_ops in include/linux/mdev.h
+4. struct vfio_iommu_driver_ops in include/linux/vfio.h
diff --git a/Documentation/vfio.txt b/Documentation/vfio.txt
index 1dd3fdd..ef6a511 100644
--- a/Documentation/vfio.txt
+++ b/Documentation/vfio.txt
@@ -1,5 +1,7 @@
-VFIO - "Virtual Function I/O"[1]
--------------------------------------------------------------------------------
+==================================
+VFIO - "Virtual Function I/O" [1]_
+==================================
+
Many modern system now provide DMA and interrupt remapping facilities
to help ensure I/O devices behave within the boundaries they've been
allotted. This includes x86 hardware with AMD-Vi and Intel VT-d,
@@ -7,14 +9,14 @@
systems such as Freescale PAMU. The VFIO driver is an IOMMU/device
agnostic framework for exposing direct device access to userspace, in
a secure, IOMMU protected environment. In other words, this allows
-safe[2], non-privileged, userspace drivers.
+safe [2]_, non-privileged, userspace drivers.
Why do we want that? Virtual machines often make use of direct device
access ("device assignment") when configured for the highest possible
I/O performance. From a device and host perspective, this simply
turns the VM into a userspace driver, with the benefits of
significantly reduced latency, higher bandwidth, and direct use of
-bare-metal device drivers[3].
+bare-metal device drivers [3]_.
Some applications, particularly in the high performance computing
field, also benefit from low-overhead, direct device access from
@@ -31,7 +33,7 @@
secure, more featureful userspace driver environment than UIO.
Groups, Devices, and IOMMUs
--------------------------------------------------------------------------------
+---------------------------
Devices are the main target of any I/O driver. Devices typically
create a programming interface made up of I/O access, interrupts,
@@ -114,40 +116,40 @@
notifications.
VFIO Usage Example
--------------------------------------------------------------------------------
+------------------
-Assume user wants to access PCI device 0000:06:0d.0
+Assume user wants to access PCI device 0000:06:0d.0::
-$ readlink /sys/bus/pci/devices/0000:06:0d.0/iommu_group
-../../../../kernel/iommu_groups/26
+ $ readlink /sys/bus/pci/devices/0000:06:0d.0/iommu_group
+ ../../../../kernel/iommu_groups/26
This device is therefore in IOMMU group 26. This device is on the
pci bus, therefore the user will make use of vfio-pci to manage the
-group:
+group::
-# modprobe vfio-pci
+ # modprobe vfio-pci
Binding this device to the vfio-pci driver creates the VFIO group
-character devices for this group:
+character devices for this group::
-$ lspci -n -s 0000:06:0d.0
-06:0d.0 0401: 1102:0002 (rev 08)
-# echo 0000:06:0d.0 > /sys/bus/pci/devices/0000:06:0d.0/driver/unbind
-# echo 1102 0002 > /sys/bus/pci/drivers/vfio-pci/new_id
+ $ lspci -n -s 0000:06:0d.0
+ 06:0d.0 0401: 1102:0002 (rev 08)
+ # echo 0000:06:0d.0 > /sys/bus/pci/devices/0000:06:0d.0/driver/unbind
+ # echo 1102 0002 > /sys/bus/pci/drivers/vfio-pci/new_id
Now we need to look at what other devices are in the group to free
-it for use by VFIO:
+it for use by VFIO::
-$ ls -l /sys/bus/pci/devices/0000:06:0d.0/iommu_group/devices
-total 0
-lrwxrwxrwx. 1 root root 0 Apr 23 16:13 0000:00:1e.0 ->
- ../../../../devices/pci0000:00/0000:00:1e.0
-lrwxrwxrwx. 1 root root 0 Apr 23 16:13 0000:06:0d.0 ->
- ../../../../devices/pci0000:00/0000:00:1e.0/0000:06:0d.0
-lrwxrwxrwx. 1 root root 0 Apr 23 16:13 0000:06:0d.1 ->
- ../../../../devices/pci0000:00/0000:00:1e.0/0000:06:0d.1
+ $ ls -l /sys/bus/pci/devices/0000:06:0d.0/iommu_group/devices
+ total 0
+ lrwxrwxrwx. 1 root root 0 Apr 23 16:13 0000:00:1e.0 ->
+ ../../../../devices/pci0000:00/0000:00:1e.0
+ lrwxrwxrwx. 1 root root 0 Apr 23 16:13 0000:06:0d.0 ->
+ ../../../../devices/pci0000:00/0000:00:1e.0/0000:06:0d.0
+ lrwxrwxrwx. 1 root root 0 Apr 23 16:13 0000:06:0d.1 ->
+ ../../../../devices/pci0000:00/0000:00:1e.0/0000:06:0d.1
-This device is behind a PCIe-to-PCI bridge[4], therefore we also
+This device is behind a PCIe-to-PCI bridge [4]_, therefore we also
need to add device 0000:06:0d.1 to the group following the same
procedure as above. Device 0000:00:1e.0 is a bridge that does
not currently have a host driver, therefore it's not required to
@@ -157,12 +159,12 @@
The final step is to provide the user with access to the group if
unprivileged operation is desired (note that /dev/vfio/vfio provides
no capabilities on its own and is therefore expected to be set to
-mode 0666 by the system).
+mode 0666 by the system)::
-# chown user:user /dev/vfio/26
+ # chown user:user /dev/vfio/26
The user now has full access to all the devices and the iommu for this
-group and can access them as follows:
+group and can access them as follows::
int container, group, device, i;
struct vfio_group_status group_status =
@@ -248,31 +250,31 @@
VFIO bus drivers, such as vfio-pci make use of only a few interfaces
into VFIO core. When devices are bound and unbound to the driver,
the driver should call vfio_add_group_dev() and vfio_del_group_dev()
-respectively:
+respectively::
-extern int vfio_add_group_dev(struct iommu_group *iommu_group,
- struct device *dev,
- const struct vfio_device_ops *ops,
- void *device_data);
+ extern int vfio_add_group_dev(struct iommu_group *iommu_group,
+ struct device *dev,
+ const struct vfio_device_ops *ops,
+ void *device_data);
-extern void *vfio_del_group_dev(struct device *dev);
+ extern void *vfio_del_group_dev(struct device *dev);
vfio_add_group_dev() indicates to the core to begin tracking the
specified iommu_group and register the specified dev as owned by
a VFIO bus driver. The driver provides an ops structure for callbacks
-similar to a file operations structure:
+similar to a file operations structure::
-struct vfio_device_ops {
- int (*open)(void *device_data);
- void (*release)(void *device_data);
- ssize_t (*read)(void *device_data, char __user *buf,
- size_t count, loff_t *ppos);
- ssize_t (*write)(void *device_data, const char __user *buf,
- size_t size, loff_t *ppos);
- long (*ioctl)(void *device_data, unsigned int cmd,
- unsigned long arg);
- int (*mmap)(void *device_data, struct vm_area_struct *vma);
-};
+ struct vfio_device_ops {
+ int (*open)(void *device_data);
+ void (*release)(void *device_data);
+ ssize_t (*read)(void *device_data, char __user *buf,
+ size_t count, loff_t *ppos);
+ ssize_t (*write)(void *device_data, const char __user *buf,
+ size_t size, loff_t *ppos);
+ long (*ioctl)(void *device_data, unsigned int cmd,
+ unsigned long arg);
+ int (*mmap)(void *device_data, struct vm_area_struct *vma);
+ };
Each function is passed the device_data that was originally registered
in the vfio_add_group_dev() call above. This allows the bus driver
@@ -285,50 +287,55 @@
PPC64 sPAPR implementation note
--------------------------------------------------------------------------------
+-------------------------------
This implementation has some specifics:
1) On older systems (POWER7 with P5IOC2/IODA1) only one IOMMU group per
-container is supported as an IOMMU table is allocated at the boot time,
-one table per a IOMMU group which is a Partitionable Endpoint (PE)
-(PE is often a PCI domain but not always).
-Newer systems (POWER8 with IODA2) have improved hardware design which allows
-to remove this limitation and have multiple IOMMU groups per a VFIO container.
+ container is supported as an IOMMU table is allocated at the boot time,
+ one table per a IOMMU group which is a Partitionable Endpoint (PE)
+ (PE is often a PCI domain but not always).
+
+ Newer systems (POWER8 with IODA2) have improved hardware design which allows
+ to remove this limitation and have multiple IOMMU groups per a VFIO
+ container.
2) The hardware supports so called DMA windows - the PCI address range
-within which DMA transfer is allowed, any attempt to access address space
-out of the window leads to the whole PE isolation.
+ within which DMA transfer is allowed, any attempt to access address space
+ out of the window leads to the whole PE isolation.
3) PPC64 guests are paravirtualized but not fully emulated. There is an API
-to map/unmap pages for DMA, and it normally maps 1..32 pages per call and
-currently there is no way to reduce the number of calls. In order to make things
-faster, the map/unmap handling has been implemented in real mode which provides
-an excellent performance which has limitations such as inability to do
-locked pages accounting in real time.
+ to map/unmap pages for DMA, and it normally maps 1..32 pages per call and
+ currently there is no way to reduce the number of calls. In order to make
+ things faster, the map/unmap handling has been implemented in real mode
+ which provides an excellent performance which has limitations such as
+ inability to do locked pages accounting in real time.
4) According to sPAPR specification, A Partitionable Endpoint (PE) is an I/O
-subtree that can be treated as a unit for the purposes of partitioning and
-error recovery. A PE may be a single or multi-function IOA (IO Adapter), a
-function of a multi-function IOA, or multiple IOAs (possibly including switch
-and bridge structures above the multiple IOAs). PPC64 guests detect PCI errors
-and recover from them via EEH RTAS services, which works on the basis of
-additional ioctl commands.
+ subtree that can be treated as a unit for the purposes of partitioning and
+ error recovery. A PE may be a single or multi-function IOA (IO Adapter), a
+ function of a multi-function IOA, or multiple IOAs (possibly including
+ switch and bridge structures above the multiple IOAs). PPC64 guests detect
+ PCI errors and recover from them via EEH RTAS services, which works on the
+ basis of additional ioctl commands.
-So 4 additional ioctls have been added:
+ So 4 additional ioctls have been added:
- VFIO_IOMMU_SPAPR_TCE_GET_INFO - returns the size and the start
- of the DMA window on the PCI bus.
+ VFIO_IOMMU_SPAPR_TCE_GET_INFO
+ returns the size and the start of the DMA window on the PCI bus.
- VFIO_IOMMU_ENABLE - enables the container. The locked pages accounting
+ VFIO_IOMMU_ENABLE
+ enables the container. The locked pages accounting
is done at this point. This lets user first to know what
the DMA window is and adjust rlimit before doing any real job.
- VFIO_IOMMU_DISABLE - disables the container.
+ VFIO_IOMMU_DISABLE
+ disables the container.
- VFIO_EEH_PE_OP - provides an API for EEH setup, error detection and recovery.
+ VFIO_EEH_PE_OP
+ provides an API for EEH setup, error detection and recovery.
-The code flow from the example above should be slightly changed:
+ The code flow from the example above should be slightly changed::
struct vfio_eeh_pe_op pe_op = { .argsz = sizeof(pe_op), .flags = 0 };
@@ -442,73 +449,73 @@
....
5) There is v2 of SPAPR TCE IOMMU. It deprecates VFIO_IOMMU_ENABLE/
-VFIO_IOMMU_DISABLE and implements 2 new ioctls:
-VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY
-(which are unsupported in v1 IOMMU).
+ VFIO_IOMMU_DISABLE and implements 2 new ioctls:
+ VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY
+ (which are unsupported in v1 IOMMU).
-PPC64 paravirtualized guests generate a lot of map/unmap requests,
-and the handling of those includes pinning/unpinning pages and updating
-mm::locked_vm counter to make sure we do not exceed the rlimit.
-The v2 IOMMU splits accounting and pinning into separate operations:
+ PPC64 paravirtualized guests generate a lot of map/unmap requests,
+ and the handling of those includes pinning/unpinning pages and updating
+ mm::locked_vm counter to make sure we do not exceed the rlimit.
+ The v2 IOMMU splits accounting and pinning into separate operations:
-- VFIO_IOMMU_SPAPR_REGISTER_MEMORY/VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY ioctls
-receive a user space address and size of the block to be pinned.
-Bisecting is not supported and VFIO_IOMMU_UNREGISTER_MEMORY is expected to
-be called with the exact address and size used for registering
-the memory block. The userspace is not expected to call these often.
-The ranges are stored in a linked list in a VFIO container.
+ - VFIO_IOMMU_SPAPR_REGISTER_MEMORY/VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY ioctls
+ receive a user space address and size of the block to be pinned.
+ Bisecting is not supported and VFIO_IOMMU_UNREGISTER_MEMORY is expected to
+ be called with the exact address and size used for registering
+ the memory block. The userspace is not expected to call these often.
+ The ranges are stored in a linked list in a VFIO container.
-- VFIO_IOMMU_MAP_DMA/VFIO_IOMMU_UNMAP_DMA ioctls only update the actual
-IOMMU table and do not do pinning; instead these check that the userspace
-address is from pre-registered range.
+ - VFIO_IOMMU_MAP_DMA/VFIO_IOMMU_UNMAP_DMA ioctls only update the actual
+ IOMMU table and do not do pinning; instead these check that the userspace
+ address is from pre-registered range.
-This separation helps in optimizing DMA for guests.
+ This separation helps in optimizing DMA for guests.
6) sPAPR specification allows guests to have an additional DMA window(s) on
-a PCI bus with a variable page size. Two ioctls have been added to support
-this: VFIO_IOMMU_SPAPR_TCE_CREATE and VFIO_IOMMU_SPAPR_TCE_REMOVE.
-The platform has to support the functionality or error will be returned to
-the userspace. The existing hardware supports up to 2 DMA windows, one is
-2GB long, uses 4K pages and called "default 32bit window"; the other can
-be as big as entire RAM, use different page size, it is optional - guests
-create those in run-time if the guest driver supports 64bit DMA.
+ a PCI bus with a variable page size. Two ioctls have been added to support
+ this: VFIO_IOMMU_SPAPR_TCE_CREATE and VFIO_IOMMU_SPAPR_TCE_REMOVE.
+ The platform has to support the functionality or error will be returned to
+ the userspace. The existing hardware supports up to 2 DMA windows, one is
+ 2GB long, uses 4K pages and called "default 32bit window"; the other can
+ be as big as entire RAM, use different page size, it is optional - guests
+ create those in run-time if the guest driver supports 64bit DMA.
-VFIO_IOMMU_SPAPR_TCE_CREATE receives a page shift, a DMA window size and
-a number of TCE table levels (if a TCE table is going to be big enough and
-the kernel may not be able to allocate enough of physically contiguous memory).
-It creates a new window in the available slot and returns the bus address where
-the new window starts. Due to hardware limitation, the user space cannot choose
-the location of DMA windows.
+ VFIO_IOMMU_SPAPR_TCE_CREATE receives a page shift, a DMA window size and
+ a number of TCE table levels (if a TCE table is going to be big enough and
+ the kernel may not be able to allocate enough of physically contiguous
+ memory). It creates a new window in the available slot and returns the bus
+ address where the new window starts. Due to hardware limitation, the user
+ space cannot choose the location of DMA windows.
-VFIO_IOMMU_SPAPR_TCE_REMOVE receives the bus start address of the window
-and removes it.
+ VFIO_IOMMU_SPAPR_TCE_REMOVE receives the bus start address of the window
+ and removes it.
-------------------------------------------------------------------------------
-[1] VFIO was originally an acronym for "Virtual Function I/O" in its
-initial implementation by Tom Lyon while as Cisco. We've since
-outgrown the acronym, but it's catchy.
+.. [1] VFIO was originally an acronym for "Virtual Function I/O" in its
+ initial implementation by Tom Lyon while as Cisco. We've since
+ outgrown the acronym, but it's catchy.
-[2] "safe" also depends upon a device being "well behaved". It's
-possible for multi-function devices to have backdoors between
-functions and even for single function devices to have alternative
-access to things like PCI config space through MMIO registers. To
-guard against the former we can include additional precautions in the
-IOMMU driver to group multi-function PCI devices together
-(iommu=group_mf). The latter we can't prevent, but the IOMMU should
-still provide isolation. For PCI, SR-IOV Virtual Functions are the
-best indicator of "well behaved", as these are designed for
-virtualization usage models.
+.. [2] "safe" also depends upon a device being "well behaved". It's
+ possible for multi-function devices to have backdoors between
+ functions and even for single function devices to have alternative
+ access to things like PCI config space through MMIO registers. To
+ guard against the former we can include additional precautions in the
+ IOMMU driver to group multi-function PCI devices together
+ (iommu=group_mf). The latter we can't prevent, but the IOMMU should
+ still provide isolation. For PCI, SR-IOV Virtual Functions are the
+ best indicator of "well behaved", as these are designed for
+ virtualization usage models.
-[3] As always there are trade-offs to virtual machine device
-assignment that are beyond the scope of VFIO. It's expected that
-future IOMMU technologies will reduce some, but maybe not all, of
-these trade-offs.
+.. [3] As always there are trade-offs to virtual machine device
+ assignment that are beyond the scope of VFIO. It's expected that
+ future IOMMU technologies will reduce some, but maybe not all, of
+ these trade-offs.
-[4] In this case the device is below a PCI bridge, so transactions
-from either function of the device are indistinguishable to the iommu:
+.. [4] In this case the device is below a PCI bridge, so transactions
+ from either function of the device are indistinguishable to the iommu::
--[0000:00]-+-1e.0-[06]--+-0d.0
- \-0d.1
+ -[0000:00]-+-1e.0-[06]--+-0d.0
+ \-0d.1
-00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
+ 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index 3a9831b..e63a35f 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -4329,3 +4329,21 @@
virtual SMT modes that can be set using KVM_CAP_PPC_SMT. If bit N
(counting from the right) is set, then a virtual SMT mode of 2^N is
available.
+
+8.11 KVM_CAP_HYPERV_SYNIC2
+
+Architectures: x86
+
+This capability enables a newer version of Hyper-V Synthetic interrupt
+controller (SynIC). The only difference with KVM_CAP_HYPERV_SYNIC is that KVM
+doesn't clear SynIC message and event flags pages when they are enabled by
+writing to the respective MSRs.
+
+8.12 KVM_CAP_HYPERV_VP_INDEX
+
+Architectures: x86
+
+This capability indicates that userspace can load HV_X64_MSR_VP_INDEX msr. Its
+value is used to denote the target vcpu for a SynIC interrupt. For
+compatibilty, KVM initializes this msr to KVM's internal vcpu index. When this
+capability is absent, userspace can still query this msr's value.
diff --git a/Documentation/virtual/kvm/msr.txt b/Documentation/virtual/kvm/msr.txt
index 0a9ea51..1ebecc1 100644
--- a/Documentation/virtual/kvm/msr.txt
+++ b/Documentation/virtual/kvm/msr.txt
@@ -166,10 +166,11 @@
MSR_KVM_ASYNC_PF_EN: 0x4b564d02
data: Bits 63-6 hold 64-byte aligned physical address of a
64 byte memory area which must be in guest RAM and must be
- zeroed. Bits 5-2 are reserved and should be zero. Bit 0 is 1
+ zeroed. Bits 5-3 are reserved and should be zero. Bit 0 is 1
when asynchronous page faults are enabled on the vcpu 0 when
disabled. Bit 1 is 1 if asynchronous page faults can be injected
- when vcpu is in cpl == 0.
+ when vcpu is in cpl == 0. Bit 2 is 1 if asynchronous page faults
+ are delivered to L1 as #PF vmexits.
First 4 byte of 64 byte memory location will be written to by
the hypervisor at the time of asynchronous page fault (APF)
diff --git a/Documentation/xillybus.txt b/Documentation/xillybus.txt
index 1660145..2446ee3 100644
--- a/Documentation/xillybus.txt
+++ b/Documentation/xillybus.txt
@@ -1,12 +1,11 @@
+==========================================
+Xillybus driver for generic FPGA interface
+==========================================
- ==========================================
- Xillybus driver for generic FPGA interface
- ==========================================
+:Author: Eli Billauer, Xillybus Ltd. (http://xillybus.com)
+:Email: eli.billauer@gmail.com or as advertised on Xillybus' site.
-Author: Eli Billauer, Xillybus Ltd. (http://xillybus.com)
-Email: eli.billauer@gmail.com or as advertised on Xillybus' site.
-
-Contents:
+.. Contents:
- Introduction
-- Background
@@ -17,7 +16,7 @@
-- Synchronization
-- Seekable pipes
-- Internals
+ - Internals
-- Source code organization
-- Pipe attributes
-- Host never reads from the FPGA
@@ -29,7 +28,7 @@
-- The "nonempty" message (supporting poll)
-INTRODUCTION
+Introduction
============
Background
@@ -105,7 +104,7 @@
The data structure just mentioned should not be confused with PCI's
configuration space or the Flattened Device Tree.
-USAGE
+Usage
=====
User interface
@@ -117,11 +116,11 @@
Probing below). To communicate with the FPGA, open the device file that
corresponds to the hardware FIFO you want to send data or receive data from,
and use plain write() or read() calls, just like with a regular pipe. In
-particular, it makes perfect sense to go:
+particular, it makes perfect sense to go::
-$ cat mydata > /dev/xillybus_thisfifo
+ $ cat mydata > /dev/xillybus_thisfifo
-$ cat /dev/xillybus_thatfifo > hisdata
+ $ cat /dev/xillybus_thatfifo > hisdata
possibly pressing CTRL-C as some stage, even though the xillybus_* pipes have
the capability to send an EOF (but may not use it).
@@ -178,7 +177,7 @@
read() or write() as required.
-INTERNALS
+Internals
=========
Source code organization
@@ -365,7 +364,7 @@
(except possibly for the last) are 100% utilized this way.
The "nonempty" message (supporting poll)
----------------------------------------
+----------------------------------------
In order to support the "poll" method (and hence select() ), there is a small
catch regarding the FPGA to host direction: The FPGA may have filled a DMA
diff --git a/Documentation/xz.txt b/Documentation/xz.txt
index 2cf3e26..b2220d0 100644
--- a/Documentation/xz.txt
+++ b/Documentation/xz.txt
@@ -1,121 +1,127 @@
-
+============================
XZ data compression in Linux
============================
Introduction
+============
- XZ is a general purpose data compression format with high compression
- ratio and relatively fast decompression. The primary compression
- algorithm (filter) is LZMA2. Additional filters can be used to improve
- compression ratio even further. E.g. Branch/Call/Jump (BCJ) filters
- improve compression ratio of executable data.
+XZ is a general purpose data compression format with high compression
+ratio and relatively fast decompression. The primary compression
+algorithm (filter) is LZMA2. Additional filters can be used to improve
+compression ratio even further. E.g. Branch/Call/Jump (BCJ) filters
+improve compression ratio of executable data.
- The XZ decompressor in Linux is called XZ Embedded. It supports
- the LZMA2 filter and optionally also BCJ filters. CRC32 is supported
- for integrity checking. The home page of XZ Embedded is at
- <http://tukaani.org/xz/embedded.html>, where you can find the
- latest version and also information about using the code outside
- the Linux kernel.
+The XZ decompressor in Linux is called XZ Embedded. It supports
+the LZMA2 filter and optionally also BCJ filters. CRC32 is supported
+for integrity checking. The home page of XZ Embedded is at
+<http://tukaani.org/xz/embedded.html>, where you can find the
+latest version and also information about using the code outside
+the Linux kernel.
- For userspace, XZ Utils provide a zlib-like compression library
- and a gzip-like command line tool. XZ Utils can be downloaded from
- <http://tukaani.org/xz/>.
+For userspace, XZ Utils provide a zlib-like compression library
+and a gzip-like command line tool. XZ Utils can be downloaded from
+<http://tukaani.org/xz/>.
XZ related components in the kernel
+===================================
- The xz_dec module provides XZ decompressor with single-call (buffer
- to buffer) and multi-call (stateful) APIs. The usage of the xz_dec
- module is documented in include/linux/xz.h.
+The xz_dec module provides XZ decompressor with single-call (buffer
+to buffer) and multi-call (stateful) APIs. The usage of the xz_dec
+module is documented in include/linux/xz.h.
- The xz_dec_test module is for testing xz_dec. xz_dec_test is not
- useful unless you are hacking the XZ decompressor. xz_dec_test
- allocates a char device major dynamically to which one can write
- .xz files from userspace. The decompressed output is thrown away.
- Keep an eye on dmesg to see diagnostics printed by xz_dec_test.
- See the xz_dec_test source code for the details.
+The xz_dec_test module is for testing xz_dec. xz_dec_test is not
+useful unless you are hacking the XZ decompressor. xz_dec_test
+allocates a char device major dynamically to which one can write
+.xz files from userspace. The decompressed output is thrown away.
+Keep an eye on dmesg to see diagnostics printed by xz_dec_test.
+See the xz_dec_test source code for the details.
- For decompressing the kernel image, initramfs, and initrd, there
- is a wrapper function in lib/decompress_unxz.c. Its API is the
- same as in other decompress_*.c files, which is defined in
- include/linux/decompress/generic.h.
+For decompressing the kernel image, initramfs, and initrd, there
+is a wrapper function in lib/decompress_unxz.c. Its API is the
+same as in other decompress_*.c files, which is defined in
+include/linux/decompress/generic.h.
- scripts/xz_wrap.sh is a wrapper for the xz command line tool found
- from XZ Utils. The wrapper sets compression options to values suitable
- for compressing the kernel image.
+scripts/xz_wrap.sh is a wrapper for the xz command line tool found
+from XZ Utils. The wrapper sets compression options to values suitable
+for compressing the kernel image.
- For kernel makefiles, two commands are provided for use with
- $(call if_needed). The kernel image should be compressed with
- $(call if_needed,xzkern) which will use a BCJ filter and a big LZMA2
- dictionary. It will also append a four-byte trailer containing the
- uncompressed size of the file, which is needed by the boot code.
- Other things should be compressed with $(call if_needed,xzmisc)
- which will use no BCJ filter and 1 MiB LZMA2 dictionary.
+For kernel makefiles, two commands are provided for use with
+$(call if_needed). The kernel image should be compressed with
+$(call if_needed,xzkern) which will use a BCJ filter and a big LZMA2
+dictionary. It will also append a four-byte trailer containing the
+uncompressed size of the file, which is needed by the boot code.
+Other things should be compressed with $(call if_needed,xzmisc)
+which will use no BCJ filter and 1 MiB LZMA2 dictionary.
Notes on compression options
+============================
- Since the XZ Embedded supports only streams with no integrity check or
- CRC32, make sure that you don't use some other integrity check type
- when encoding files that are supposed to be decoded by the kernel. With
- liblzma, you need to use either LZMA_CHECK_NONE or LZMA_CHECK_CRC32
- when encoding. With the xz command line tool, use --check=none or
- --check=crc32.
+Since the XZ Embedded supports only streams with no integrity check or
+CRC32, make sure that you don't use some other integrity check type
+when encoding files that are supposed to be decoded by the kernel. With
+liblzma, you need to use either LZMA_CHECK_NONE or LZMA_CHECK_CRC32
+when encoding. With the xz command line tool, use --check=none or
+--check=crc32.
- Using CRC32 is strongly recommended unless there is some other layer
- which will verify the integrity of the uncompressed data anyway.
- Double checking the integrity would probably be waste of CPU cycles.
- Note that the headers will always have a CRC32 which will be validated
- by the decoder; you can only change the integrity check type (or
- disable it) for the actual uncompressed data.
+Using CRC32 is strongly recommended unless there is some other layer
+which will verify the integrity of the uncompressed data anyway.
+Double checking the integrity would probably be waste of CPU cycles.
+Note that the headers will always have a CRC32 which will be validated
+by the decoder; you can only change the integrity check type (or
+disable it) for the actual uncompressed data.
- In userspace, LZMA2 is typically used with dictionary sizes of several
- megabytes. The decoder needs to have the dictionary in RAM, thus big
- dictionaries cannot be used for files that are intended to be decoded
- by the kernel. 1 MiB is probably the maximum reasonable dictionary
- size for in-kernel use (maybe more is OK for initramfs). The presets
- in XZ Utils may not be optimal when creating files for the kernel,
- so don't hesitate to use custom settings. Example:
+In userspace, LZMA2 is typically used with dictionary sizes of several
+megabytes. The decoder needs to have the dictionary in RAM, thus big
+dictionaries cannot be used for files that are intended to be decoded
+by the kernel. 1 MiB is probably the maximum reasonable dictionary
+size for in-kernel use (maybe more is OK for initramfs). The presets
+in XZ Utils may not be optimal when creating files for the kernel,
+so don't hesitate to use custom settings. Example::
- xz --check=crc32 --lzma2=dict=512KiB inputfile
+ xz --check=crc32 --lzma2=dict=512KiB inputfile
- An exception to above dictionary size limitation is when the decoder
- is used in single-call mode. Decompressing the kernel itself is an
- example of this situation. In single-call mode, the memory usage
- doesn't depend on the dictionary size, and it is perfectly fine to
- use a big dictionary: for maximum compression, the dictionary should
- be at least as big as the uncompressed data itself.
+An exception to above dictionary size limitation is when the decoder
+is used in single-call mode. Decompressing the kernel itself is an
+example of this situation. In single-call mode, the memory usage
+doesn't depend on the dictionary size, and it is perfectly fine to
+use a big dictionary: for maximum compression, the dictionary should
+be at least as big as the uncompressed data itself.
Future plans
+============
- Creating a limited XZ encoder may be considered if people think it is
- useful. LZMA2 is slower to compress than e.g. Deflate or LZO even at
- the fastest settings, so it isn't clear if LZMA2 encoder is wanted
- into the kernel.
+Creating a limited XZ encoder may be considered if people think it is
+useful. LZMA2 is slower to compress than e.g. Deflate or LZO even at
+the fastest settings, so it isn't clear if LZMA2 encoder is wanted
+into the kernel.
- Support for limited random-access reading is planned for the
- decompression code. I don't know if it could have any use in the
- kernel, but I know that it would be useful in some embedded projects
- outside the Linux kernel.
+Support for limited random-access reading is planned for the
+decompression code. I don't know if it could have any use in the
+kernel, but I know that it would be useful in some embedded projects
+outside the Linux kernel.
Conformance to the .xz file format specification
+================================================
- There are a couple of corner cases where things have been simplified
- at expense of detecting errors as early as possible. These should not
- matter in practice all, since they don't cause security issues. But
- it is good to know this if testing the code e.g. with the test files
- from XZ Utils.
+There are a couple of corner cases where things have been simplified
+at expense of detecting errors as early as possible. These should not
+matter in practice all, since they don't cause security issues. But
+it is good to know this if testing the code e.g. with the test files
+from XZ Utils.
Reporting bugs
+==============
- Before reporting a bug, please check that it's not fixed already
- at upstream. See <http://tukaani.org/xz/embedded.html> to get the
- latest code.
+Before reporting a bug, please check that it's not fixed already
+at upstream. See <http://tukaani.org/xz/embedded.html> to get the
+latest code.
- Report bugs to <lasse.collin@tukaani.org> or visit #tukaani on
- Freenode and talk to Larhzu. I don't actively read LKML or other
- kernel-related mailing lists, so if there's something I should know,
- you should email to me personally or use IRC.
+Report bugs to <lasse.collin@tukaani.org> or visit #tukaani on
+Freenode and talk to Larhzu. I don't actively read LKML or other
+kernel-related mailing lists, so if there's something I should know,
+you should email to me personally or use IRC.
- Don't bother Igor Pavlov with questions about the XZ implementation
- in the kernel or about XZ Utils. While these two implementations
- include essential code that is directly based on Igor Pavlov's code,
- these implementations aren't maintained nor supported by him.
+Don't bother Igor Pavlov with questions about the XZ implementation
+in the kernel or about XZ Utils. While these two implementations
+include essential code that is directly based on Igor Pavlov's code,
+these implementations aren't maintained nor supported by him.
diff --git a/Documentation/zorro.txt b/Documentation/zorro.txt
index d530971..664072b 100644
--- a/Documentation/zorro.txt
+++ b/Documentation/zorro.txt
@@ -1,12 +1,13 @@
- Writing Device Drivers for Zorro Devices
- ----------------------------------------
+========================================
+Writing Device Drivers for Zorro Devices
+========================================
-Written by Geert Uytterhoeven <geert@linux-m68k.org>
-Last revised: September 5, 2003
+:Author: Written by Geert Uytterhoeven <geert@linux-m68k.org>
+:Last revised: September 5, 2003
-1. Introduction
----------------
+Introduction
+------------
The Zorro bus is the bus used in the Amiga family of computers. Thanks to
AutoConfig(tm), it's 100% Plug-and-Play.
@@ -20,12 +21,12 @@
with Zorro II. The Zorro III address space lies outside the first 16 MB.
-2. Probing for Zorro Devices
-----------------------------
+Probing for Zorro Devices
+-------------------------
-Zorro devices are found by calling `zorro_find_device()', which returns a
-pointer to the `next' Zorro device with the specified Zorro ID. A probe loop
-for the board with Zorro ID `ZORRO_PROD_xxx' looks like:
+Zorro devices are found by calling ``zorro_find_device()``, which returns a
+pointer to the ``next`` Zorro device with the specified Zorro ID. A probe loop
+for the board with Zorro ID ``ZORRO_PROD_xxx`` looks like::
struct zorro_dev *z = NULL;
@@ -35,8 +36,8 @@
...
}
-`ZORRO_WILDCARD' acts as a wildcard and finds any Zorro device. If your driver
-supports different types of boards, you can use a construct like:
+``ZORRO_WILDCARD`` acts as a wildcard and finds any Zorro device. If your driver
+supports different types of boards, you can use a construct like::
struct zorro_dev *z = NULL;
@@ -49,24 +50,24 @@
}
-3. Zorro Resources
-------------------
+Zorro Resources
+---------------
Before you can access a Zorro device's registers, you have to make sure it's
not yet in use. This is done using the I/O memory space resource management
-functions:
+functions::
request_mem_region()
release_mem_region()
-Shortcuts to claim the whole device's address space are provided as well:
+Shortcuts to claim the whole device's address space are provided as well::
zorro_request_device
zorro_release_device
-4. Accessing the Zorro Address Space
-------------------------------------
+Accessing the Zorro Address Space
+---------------------------------
The address regions in the Zorro device resources are Zorro bus address
regions. Due to the identity bus-physical address mapping on the Zorro bus,
@@ -78,26 +79,26 @@
explicitly using z_ioremap().
Conversion from bus/physical Zorro II addresses to kernel virtual addresses
- and vice versa is done using:
+ and vice versa is done using::
virt_addr = ZTWO_VADDR(bus_addr);
bus_addr = ZTWO_PADDR(virt_addr);
- Zorro III address space must be mapped explicitly using z_ioremap() first
- before it can be accessed:
+ before it can be accessed::
virt_addr = z_ioremap(bus_addr, size);
...
z_iounmap(virt_addr);
-5. References
--------------
+References
+----------
-linux/include/linux/zorro.h
-linux/include/uapi/linux/zorro.h
-linux/include/uapi/linux/zorro_ids.h
-linux/arch/m68k/include/asm/zorro.h
-linux/drivers/zorro
-/proc/bus/zorro
+#. linux/include/linux/zorro.h
+#. linux/include/uapi/linux/zorro.h
+#. linux/include/uapi/linux/zorro_ids.h
+#. linux/arch/m68k/include/asm/zorro.h
+#. linux/drivers/zorro
+#. /proc/bus/zorro
diff --git a/MAINTAINERS b/MAINTAINERS
index f6ec1be..4507c256 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -205,7 +205,6 @@
F: include/uapi/linux/virtio_9p.h
F: include/trace/events/9p.h
-
A8293 MEDIA DRIVER
M: Antti Palosaari <crope@iki.fi>
L: linux-media@vger.kernel.org
@@ -492,13 +491,6 @@
F: Documentation/hwmon/adt7475
F: drivers/hwmon/adt7475.c
-ADXL34X THREE-AXIS DIGITAL ACCELEROMETER DRIVER (ADXL345/ADXL346)
-M: Michael Hennerich <michael.hennerich@analog.com>
-W: http://wiki.analog.com/ADXL345
-W: http://ez.analog.com/community/linux-device-drivers
-S: Supported
-F: drivers/input/misc/adxl34x.c
-
ADVANSYS SCSI DRIVER
M: Matthew Wilcox <matthew@wil.cx>
M: Hannes Reinecke <hare@suse.com>
@@ -507,6 +499,13 @@
F: Documentation/scsi/advansys.txt
F: drivers/scsi/advansys.c
+ADXL34X THREE-AXIS DIGITAL ACCELEROMETER DRIVER (ADXL345/ADXL346)
+M: Michael Hennerich <michael.hennerich@analog.com>
+W: http://wiki.analog.com/ADXL345
+W: http://ez.analog.com/community/linux-device-drivers
+S: Supported
+F: drivers/input/misc/adxl34x.c
+
AEDSP16 DRIVER
M: Riccardo Facchetti <fizban@tin.it>
S: Maintained
@@ -808,6 +807,12 @@
S: Supported
F: sound/soc/blackfin/*
+ANALOG DEVICES INC DMA DRIVERS
+M: Lars-Peter Clausen <lars@metafoo.de>
+W: http://ez.analog.com/community/linux-device-drivers
+S: Supported
+F: drivers/dma/dma-axi-dmac.c
+
ANALOG DEVICES INC IIO DRIVERS
M: Lars-Peter Clausen <lars@metafoo.de>
M: Michael Hennerich <Michael.Hennerich@analog.com>
@@ -820,12 +825,6 @@
F: drivers/staging/iio/*/ad*
F: drivers/staging/iio/trigger/iio-trig-bfin-timer.c
-ANALOG DEVICES INC DMA DRIVERS
-M: Lars-Peter Clausen <lars@metafoo.de>
-W: http://ez.analog.com/community/linux-device-drivers
-S: Supported
-F: drivers/dma/dma-axi-dmac.c
-
ANDROID CONFIG FRAGMENTS
M: Rob Herring <robh@kernel.org>
S: Supported
@@ -872,6 +871,15 @@
F: include/uapi/linux/apm_bios.h
F: drivers/char/apm-emulation.c
+APPARMOR SECURITY MODULE
+M: John Johansen <john.johansen@canonical.com>
+L: apparmor@lists.ubuntu.com (subscribers-only, general discussion)
+W: apparmor.wiki.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jj/apparmor-dev.git
+S: Supported
+F: security/apparmor/
+F: Documentation/admin-guide/LSM/apparmor.rst
+
APPLE BCM5974 MULTITOUCH DRIVER
M: Henrik Rydberg <rydberg@bitmath.org>
L: linux-input@vger.kernel.org
@@ -895,6 +903,18 @@
S: Supported
F: arch/arm64/boot/dts/apm/
+APPLIED MICRO (APM) X-GENE SOC EDAC
+M: Loc Ho <lho@apm.com>
+S: Supported
+F: drivers/edac/xgene_edac.c
+F: Documentation/devicetree/bindings/edac/apm-xgene-edac.txt
+
+APPLIED MICRO (APM) X-GENE SOC ETHERNET (V2) DRIVER
+M: Iyappan Subramanian <isubramanian@apm.com>
+M: Keyur Chudgar <kchudgar@apm.com>
+S: Supported
+F: drivers/net/ethernet/apm/xgene-v2/
+
APPLIED MICRO (APM) X-GENE SOC ETHERNET DRIVER
M: Iyappan Subramanian <isubramanian@apm.com>
M: Keyur Chudgar <kchudgar@apm.com>
@@ -905,12 +925,6 @@
F: Documentation/devicetree/bindings/net/apm-xgene-enet.txt
F: Documentation/devicetree/bindings/net/apm-xgene-mdio.txt
-APPLIED MICRO (APM) X-GENE SOC ETHERNET (V2) DRIVER
-M: Iyappan Subramanian <isubramanian@apm.com>
-M: Keyur Chudgar <kchudgar@apm.com>
-S: Supported
-F: drivers/net/ethernet/apm/xgene-v2/
-
APPLIED MICRO (APM) X-GENE SOC PMU
M: Tai Nguyen <ttnguyen@apm.com>
S: Supported
@@ -930,6 +944,12 @@
F: drivers/video/fbdev/arcfb.c
F: drivers/video/fbdev/core/fb_defio.c
+ARC PGU DRM DRIVER
+M: Alexey Brodkin <abrodkin@synopsys.com>
+S: Supported
+F: drivers/gpu/drm/arc/
+F: Documentation/devicetree/bindings/display/snps,arcpgu.txt
+
ARCNET NETWORK LAYER
M: Michael Grzeschik <m.grzeschik@pengutronix.de>
L: netdev@vger.kernel.org
@@ -937,12 +957,6 @@
F: drivers/net/arcnet/
F: include/uapi/linux/if_arcnet.h
-ARC PGU DRM DRIVER
-M: Alexey Brodkin <abrodkin@synopsys.com>
-S: Supported
-F: drivers/gpu/drm/arc/
-F: Documentation/devicetree/bindings/display/snps,arcpgu.txt
-
ARM ARCHITECTED TIMER DRIVER
M: Mark Rutland <mark.rutland@arm.com>
M: Marc Zyngier <marc.zyngier@arm.com>
@@ -995,18 +1009,17 @@
T: git git://git.armlinux.org.uk/~rmk/linux-arm.git
F: arch/arm/
-ARM SUB-ARCHITECTURES
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-F: arch/arm/mach-*/
-F: arch/arm/plat-*/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git
-
ARM PRIMECELL AACI PL041 DRIVER
M: Russell King <linux@armlinux.org.uk>
S: Maintained
F: sound/arm/aaci.*
+ARM PRIMECELL BUS SUPPORT
+M: Russell King <linux@armlinux.org.uk>
+S: Maintained
+F: drivers/amba/
+F: include/linux/amba/bus.h
+
ARM PRIMECELL CLCD PL110 DRIVER
M: Russell King <linux@armlinux.org.uk>
S: Maintained
@@ -1030,11 +1043,22 @@
F: drivers/tty/serial/amba-pl01*.c
F: include/linux/amba/serial.h
-ARM PRIMECELL BUS SUPPORT
-M: Russell King <linux@armlinux.org.uk>
+ARM SMMU DRIVERS
+M: Will Deacon <will.deacon@arm.com>
+R: Robin Murphy <robin.murphy@arm.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
-F: drivers/amba/
-F: include/linux/amba/bus.h
+F: drivers/iommu/arm-smmu.c
+F: drivers/iommu/arm-smmu-v3.c
+F: drivers/iommu/io-pgtable-arm.c
+F: drivers/iommu/io-pgtable-arm-v7s.c
+
+ARM SUB-ARCHITECTURES
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/mach-*/
+F: arch/arm/plat-*/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git
ARM/ACTIONS SEMI ARCHITECTURE
M: Andreas Färber <afaerber@suse.de>
@@ -1067,6 +1091,11 @@
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
+ARM/Allwinner SoC Clock Support
+M: Emilio López <emilio@elopez.com.ar>
+S: Maintained
+F: drivers/clk/sunxi/
+
ARM/Allwinner sunXi SoC support
M: Maxime Ripard <maxime.ripard@free-electrons.com>
M: Chen-Yu Tsai <wens@csie.org>
@@ -1081,10 +1110,15 @@
F: drivers/soc/sunxi/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git
-ARM/Allwinner SoC Clock Support
-M: Emilio López <emilio@elopez.com.ar>
+ARM/Amlogic Meson SoC CLOCK FRAMEWORK
+M: Neil Armstrong <narmstrong@baylibre.com>
+M: Jerome Brunet <jbrunet@baylibre.com>
+L: linux-amlogic@lists.infradead.org
S: Maintained
-F: drivers/clk/sunxi/
+F: drivers/clk/meson/
+F: include/dt-bindings/clock/meson*
+F: include/dt-bindings/clock/gxbb*
+F: Documentation/devicetree/bindings/clock/amlogic*
ARM/Amlogic Meson SoC support
M: Carlo Caione <carlo@caione.org>
@@ -1096,20 +1130,10 @@
F: arch/arm/mach-meson/
F: arch/arm/boot/dts/meson*
F: arch/arm64/boot/dts/amlogic/
-F: drivers/pinctrl/meson/
+F: drivers/pinctrl/meson/
F: drivers/mmc/host/meson*
N: meson
-ARM/Amlogic Meson SoC CLOCK FRAMEWORK
-M: Neil Armstrong <narmstrong@baylibre.com>
-M: Jerome Brunet <jbrunet@baylibre.com>
-L: linux-amlogic@lists.infradead.org
-S: Maintained
-F: drivers/clk/meson/
-F: include/dt-bindings/clock/meson*
-F: include/dt-bindings/clock/gxbb*
-F: Documentation/devicetree/bindings/clock/amlogic*
-
ARM/Annapurna Labs ALPINE ARCHITECTURE
M: Tsahee Zidenberg <tsahee@annapurnalabs.com>
M: Antoine Tenart <antoine.tenart@free-electrons.com>
@@ -1132,6 +1156,18 @@
F: drivers/pinctrl/pinctrl-artpec*
F: Documentation/devicetree/bindings/pinctrl/axis,artpec6-pinctrl.txt
+ARM/ASPEED I2C DRIVER
+M: Brendan Higgins <brendanhiggins@google.com>
+R: Benjamin Herrenschmidt <benh@kernel.crashing.org>
+R: Joel Stanley <joel@jms.id.au>
+L: linux-i2c@vger.kernel.org
+L: openbmc@lists.ozlabs.org
+S: Maintained
+F: drivers/irqchip/irq-aspeed-i2c-ic.c
+F: drivers/i2c/busses/i2c-aspeed.c
+F: Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-i2c-ic.txt
+F: Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
+
ARM/ASPEED MACHINE SUPPORT
M: Joel Stanley <joel@jms.id.au>
S: Maintained
@@ -1139,6 +1175,11 @@
F: arch/arm/boot/dts/aspeed-*
F: drivers/*/*aspeed*
+ARM/ATMEL AT91 Clock Support
+M: Boris Brezillon <boris.brezillon@free-electrons.com>
+S: Maintained
+F: drivers/clk/at91
+
ARM/ATMEL AT91RM9200, AT91SAM9 AND SAMA5 SOC SUPPORT
M: Nicolas Ferre <nicolas.ferre@microchip.com>
M: Alexandre Belloni <alexandre.belloni@free-electrons.com>
@@ -1155,11 +1196,6 @@
F: arch/arm/include/debug/at91.S
F: drivers/memory/atmel*
-ARM/ATMEL AT91 Clock Support
-M: Boris Brezillon <boris.brezillon@free-electrons.com>
-S: Maintained
-F: drivers/clk/at91
-
ARM/CALXEDA HIGHBANK ARCHITECTURE
M: Rob Herring <robh@kernel.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1186,6 +1222,11 @@
S: Odd Fixes
N: clps711x
+ARM/CIRRUS LOGIC EDB9315A MACHINE SUPPORT
+M: Lennert Buytenhek <kernel@wantstofly.org>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+
ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE
M: Hartley Sweeten <hsweeten@visionengravers.com>
M: Alexander Sverdlin <alexander.sverdlin@gmail.com>
@@ -1194,11 +1235,6 @@
F: arch/arm/mach-ep93xx/
F: arch/arm/mach-ep93xx/include/mach/
-ARM/CIRRUS LOGIC EDB9315A MACHINE SUPPORT
-M: Lennert Buytenhek <kernel@wantstofly.org>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-
ARM/CLKDEV SUPPORT
M: Russell King <linux@armlinux.org.uk>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1212,6 +1248,13 @@
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
+ARM/CONEXANT DIGICOLOR MACHINE SUPPORT
+M: Baruch Siach <baruch@tkos.co.il>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/boot/dts/cx92755*
+N: digicolor
+
ARM/CONTEC MICRO9 MACHINE SUPPORT
M: Hubert Feurstein <hubert.feurstein@contec.at>
S: Maintained
@@ -1243,7 +1286,7 @@
T: git git://github.com/ulli-kroll/linux.git
S: Maintained
F: arch/arm/mach-gemini/
-F: drivers/rtc/rtc-gemini.c
+F: drivers/rtc/rtc-ftrtc010.c
ARM/CSR SIRFPRIMA2 MACHINE SUPPORT
M: Barry Song <baohua@kernel.org>
@@ -1257,13 +1300,6 @@
F: drivers/clocksource/timer-atlas7.c
N: [^a-z]sirf
-ARM/CONEXANT DIGICOLOR MACHINE SUPPORT
-M: Baruch Siach <baruch@tkos.co.il>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-F: arch/arm/boot/dts/cx92755*
-N: digicolor
-
ARM/EBSA110 MACHINE SUPPORT
M: Russell King <linux@armlinux.org.uk>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1377,6 +1413,11 @@
S: Maintained
F: arch/arm/mach-pxa/colibri-pxa270-income.c
+ARM/INTEL IOP13XX ARM ARCHITECTURE
+M: Lennert Buytenhek <kernel@wantstofly.org>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+
ARM/INTEL IOP32X ARM ARCHITECTURE
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1386,11 +1427,6 @@
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Orphan
-ARM/INTEL IOP13XX ARM ARCHITECTURE
-M: Lennert Buytenhek <kernel@wantstofly.org>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-
ARM/INTEL IQ81342EX MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1425,39 +1461,6 @@
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
-ARM/TEXAS INSTRUMENT KEYSTONE ARCHITECTURE
-M: Santosh Shilimkar <ssantosh@kernel.org>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-F: arch/arm/mach-keystone/
-F: arch/arm/boot/dts/keystone-*
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git
-
-ARM/TEXAS INSTRUMENT KEYSTONE CLOCK FRAMEWORK
-M: Santosh Shilimkar <ssantosh@kernel.org>
-L: linux-kernel@vger.kernel.org
-S: Maintained
-F: drivers/clk/keystone/
-
-ARM/TEXAS INSTRUMENT KEYSTONE ClOCKSOURCE
-M: Santosh Shilimkar <ssantosh@kernel.org>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-L: linux-kernel@vger.kernel.org
-S: Maintained
-F: drivers/clocksource/timer-keystone.c
-
-ARM/TEXAS INSTRUMENT KEYSTONE RESET DRIVER
-M: Santosh Shilimkar <ssantosh@kernel.org>
-L: linux-kernel@vger.kernel.org
-S: Maintained
-F: drivers/power/reset/keystone-reset.c
-
-ARM/TEXAS INSTRUMENT AEMIF/EMIF DRIVERS
-M: Santosh Shilimkar <ssantosh@kernel.org>
-L: linux-kernel@vger.kernel.org
-S: Maintained
-F: drivers/memory/*emif*
-
ARM/LG1K ARCHITECTURE
M: Chanho Min <chanho.min@lge.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1500,6 +1503,30 @@
M: Philipp Zabel <philipp.zabel@gmail.com>
S: Maintained
+ARM/Marvell Berlin SoC support
+M: Jisheng Zhang <jszhang@marvell.com>
+M: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/mach-berlin/
+F: arch/arm/boot/dts/berlin*
+F: arch/arm64/boot/dts/marvell/berlin*
+
+ARM/Marvell Dove/MV78xx0/Orion SOC support
+M: Jason Cooper <jason@lakedaemon.net>
+M: Andrew Lunn <andrew@lunn.ch>
+M: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+M: Gregory Clement <gregory.clement@free-electrons.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: Documentation/devicetree/bindings/soc/dove/
+F: arch/arm/mach-dove/
+F: arch/arm/mach-mv78xx0/
+F: arch/arm/mach-orion5x/
+F: arch/arm/plat-orion/
+F: arch/arm/boot/dts/dove*
+F: arch/arm/boot/dts/orion5x*
+
ARM/Marvell Kirkwood and Armada 370, 375, 38x, 39x, XP, 3700, 7K/8K SOC support
M: Jason Cooper <jason@lakedaemon.net>
M: Andrew Lunn <andrew@lunn.ch>
@@ -1518,50 +1545,6 @@
F: drivers/pinctrl/mvebu/
F: drivers/rtc/rtc-armada38x.c
-ARM/Marvell Berlin SoC support
-M: Jisheng Zhang <jszhang@marvell.com>
-M: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-F: arch/arm/mach-berlin/
-F: arch/arm/boot/dts/berlin*
-F: arch/arm64/boot/dts/marvell/berlin*
-
-
-ARM/Marvell Dove/MV78xx0/Orion SOC support
-M: Jason Cooper <jason@lakedaemon.net>
-M: Andrew Lunn <andrew@lunn.ch>
-M: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
-M: Gregory Clement <gregory.clement@free-electrons.com>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-F: Documentation/devicetree/bindings/soc/dove/
-F: arch/arm/mach-dove/
-F: arch/arm/mach-mv78xx0/
-F: arch/arm/mach-orion5x/
-F: arch/arm/plat-orion/
-F: arch/arm/boot/dts/dove*
-F: arch/arm/boot/dts/orion5x*
-
-
-ARM/Orion SoC/Technologic Systems TS-78xx platform support
-M: Alexander Clouter <alex@digriz.org.uk>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W: http://www.digriz.org.uk/ts78xx/kernel
-S: Maintained
-F: arch/arm/mach-orion5x/ts78xx-*
-
-ARM/OXNAS platform support
-M: Neil Armstrong <narmstrong@baylibre.com>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-L: linux-oxnas@lists.tuxfamily.org (moderated for non-subscribers)
-S: Maintained
-F: arch/arm/mach-oxnas/
-F: arch/arm/boot/dts/ox8*.dtsi
-F: arch/arm/boot/dts/wd-mbwe.dts
-F: arch/arm/boot/dts/cloudengines-pogoplug-series-3.dts
-N: oxnas
-
ARM/Mediatek RTC DRIVER
M: Eddie Huang <eddie.huang@mediatek.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1615,16 +1598,53 @@
F: drivers/i2c/busses/i2c-nomadik.c
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik.git
+ARM/NUVOTON W90X900 ARM ARCHITECTURE
+M: Wan ZongShun <mcuos.com@gmail.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+W: http://www.mcuos.com
+S: Maintained
+F: arch/arm/mach-w90x900/
+F: drivers/input/keyboard/w90p910_keypad.c
+F: drivers/input/touchscreen/w90p910_ts.c
+F: drivers/watchdog/nuc900_wdt.c
+F: drivers/net/ethernet/nuvoton/w90p910_ether.c
+F: drivers/mtd/nand/nuc900_nand.c
+F: drivers/rtc/rtc-nuc900.c
+F: drivers/spi/spi-nuc900.c
+F: drivers/usb/host/ehci-w90x900.c
+F: drivers/video/fbdev/nuc900fb.c
+
ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT
M: Nelson Castillo <arhuaco@freaks-unidos.net>
L: openmoko-kernel@lists.openmoko.org (subscribers-only)
W: http://wiki.openmoko.org/wiki/Neo_FreeRunner
S: Supported
-ARM/TOSA MACHINE SUPPORT
-M: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
-M: Dirk Opfer <dirk@opfer-online.de>
+ARM/Orion SoC/Technologic Systems TS-78xx platform support
+M: Alexander Clouter <alex@digriz.org.uk>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+W: http://www.digriz.org.uk/ts78xx/kernel
S: Maintained
+F: arch/arm/mach-orion5x/ts78xx-*
+
+ARM/OXNAS platform support
+M: Neil Armstrong <narmstrong@baylibre.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L: linux-oxnas@lists.tuxfamily.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/mach-oxnas/
+F: arch/arm/boot/dts/ox8*.dtsi
+F: arch/arm/boot/dts/wd-mbwe.dts
+F: arch/arm/boot/dts/cloudengines-pogoplug-series-3.dts
+N: oxnas
+
+ARM/PALM TREO SUPPORT
+M: Tomas Cech <sleep_walker@suse.com>
+L: linux-arm-kernel@lists.infradead.org
+W: http://hackndev.com
+S: Maintained
+F: arch/arm/mach-pxa/include/mach/palmtreo.h
+F: arch/arm/mach-pxa/palmtreo.c
ARM/PALMTX,PALMT5,PALMLD,PALMTE2,PALMTC SUPPORT
M: Marek Vasut <marek.vasut@gmail.com>
@@ -1642,14 +1662,6 @@
F: arch/arm/mach-pxa/include/mach/palmtc.h
F: arch/arm/mach-pxa/palmtc.c
-ARM/PALM TREO SUPPORT
-M: Tomas Cech <sleep_walker@suse.com>
-L: linux-arm-kernel@lists.infradead.org
-W: http://hackndev.com
-S: Maintained
-F: arch/arm/mach-pxa/include/mach/palmtreo.h
-F: arch/arm/mach-pxa/palmtreo.c
-
ARM/PALMZ72 SUPPORT
M: Sergey Lapin <slapin@ossfans.org>
L: linux-arm-kernel@lists.infradead.org
@@ -1790,17 +1802,6 @@
S: Maintained
F: drivers/media/platform/s5p-g2d/
-ARM/SAMSUNG S5P SERIES Multi Format Codec (MFC) SUPPORT
-M: Kyungmin Park <kyungmin.park@samsung.com>
-M: Kamil Debski <kamil@wypas.org>
-M: Jeongtae Park <jtp.park@samsung.com>
-M: Andrzej Hajda <a.hajda@samsung.com>
-L: linux-arm-kernel@lists.infradead.org
-L: linux-media@vger.kernel.org
-S: Maintained
-F: arch/arm/plat-samsung/s5p-dev-mfc.c
-F: drivers/media/platform/s5p-mfc/
-
ARM/SAMSUNG S5P SERIES HDMI CEC SUBSYSTEM SUPPORT
M: Marek Szyprowski <m.szyprowski@samsung.com>
L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
@@ -1817,6 +1818,17 @@
S: Maintained
F: drivers/media/platform/s5p-jpeg/
+ARM/SAMSUNG S5P SERIES Multi Format Codec (MFC) SUPPORT
+M: Kyungmin Park <kyungmin.park@samsung.com>
+M: Kamil Debski <kamil@wypas.org>
+M: Jeongtae Park <jtp.park@samsung.com>
+M: Andrzej Hajda <a.hajda@samsung.com>
+L: linux-arm-kernel@lists.infradead.org
+L: linux-media@vger.kernel.org
+S: Maintained
+F: arch/arm/plat-samsung/s5p-dev-mfc.c
+F: drivers/media/platform/s5p-mfc/
+
ARM/SHMOBILE ARM ARCHITECTURE
M: Simon Horman <horms@verge.net.au>
M: Magnus Damm <magnus.damm@gmail.com>
@@ -1910,26 +1922,48 @@
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
+ARM/TEXAS INSTRUMENT AEMIF/EMIF DRIVERS
+M: Santosh Shilimkar <ssantosh@kernel.org>
+L: linux-kernel@vger.kernel.org
+S: Maintained
+F: drivers/memory/*emif*
+
+ARM/TEXAS INSTRUMENT KEYSTONE ARCHITECTURE
+M: Santosh Shilimkar <ssantosh@kernel.org>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/mach-keystone/
+F: arch/arm/boot/dts/keystone-*
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git
+
+ARM/TEXAS INSTRUMENT KEYSTONE CLOCK FRAMEWORK
+M: Santosh Shilimkar <ssantosh@kernel.org>
+L: linux-kernel@vger.kernel.org
+S: Maintained
+F: drivers/clk/keystone/
+
+ARM/TEXAS INSTRUMENT KEYSTONE ClOCKSOURCE
+M: Santosh Shilimkar <ssantosh@kernel.org>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L: linux-kernel@vger.kernel.org
+S: Maintained
+F: drivers/clocksource/timer-keystone.c
+
+ARM/TEXAS INSTRUMENT KEYSTONE RESET DRIVER
+M: Santosh Shilimkar <ssantosh@kernel.org>
+L: linux-kernel@vger.kernel.org
+S: Maintained
+F: drivers/power/reset/keystone-reset.c
+
ARM/THECUS N2100 MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
-ARM/NUVOTON W90X900 ARM ARCHITECTURE
-M: Wan ZongShun <mcuos.com@gmail.com>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W: http://www.mcuos.com
+ARM/TOSA MACHINE SUPPORT
+M: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+M: Dirk Opfer <dirk@opfer-online.de>
S: Maintained
-F: arch/arm/mach-w90x900/
-F: drivers/input/keyboard/w90p910_keypad.c
-F: drivers/input/touchscreen/w90p910_ts.c
-F: drivers/watchdog/nuc900_wdt.c
-F: drivers/net/ethernet/nuvoton/w90p910_ether.c
-F: drivers/mtd/nand/nuc900_nand.c
-F: drivers/rtc/rtc-nuc900.c
-F: drivers/spi/spi-nuc900.c
-F: drivers/usb/host/ehci-w90x900.c
-F: drivers/video/fbdev/nuc900fb.c
ARM/U300 MACHINE SUPPORT
M: Linus Walleij <linus.walleij@linaro.org>
@@ -2074,16 +2108,6 @@
F: drivers/mmc/host/sdhci-of-arasan.c
F: drivers/edac/synopsys_edac.c
-ARM SMMU DRIVERS
-M: Will Deacon <will.deacon@arm.com>
-R: Robin Murphy <robin.murphy@arm.com>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-F: drivers/iommu/arm-smmu.c
-F: drivers/iommu/arm-smmu-v3.c
-F: drivers/iommu/io-pgtable-arm.c
-F: drivers/iommu/io-pgtable-arm-v7s.c
-
ARM64 PORT (AARCH64 ARCHITECTURE)
M: Catalin Marinas <catalin.marinas@arm.com>
M: Will Deacon <will.deacon@arm.com>
@@ -2195,21 +2219,10 @@
S: Supported
F: drivers/net/wireless/ath/ath6kl/
-WILOCITY WIL6210 WIRELESS DRIVER
-M: Maya Erez <qca_merez@qca.qualcomm.com>
-L: linux-wireless@vger.kernel.org
-L: wil6210@qca.qualcomm.com
-S: Supported
-W: http://wireless.kernel.org/en/users/Drivers/wil6210
-F: drivers/net/wireless/ath/wil6210/
-F: include/uapi/linux/wil6210_uapi.h
-
-CARL9170 LINUX COMMUNITY WIRELESS DRIVER
-M: Christian Lamparter <chunkeey@googlemail.com>
-L: linux-wireless@vger.kernel.org
-W: http://wireless.kernel.org/en/users/Drivers/carl9170
+ATI_REMOTE2 DRIVER
+M: Ville Syrjala <syrjala@sci.fi>
S: Maintained
-F: drivers/net/wireless/ath/carl9170/
+F: drivers/input/misc/ati_remote2.c
ATK0110 HWMON DRIVER
M: Luca Tettamanti <kronos.it@gmail.com>
@@ -2217,11 +2230,6 @@
S: Maintained
F: drivers/hwmon/asus_atk0110.c
-ATI_REMOTE2 DRIVER
-M: Ville Syrjala <syrjala@sci.fi>
-S: Maintained
-F: drivers/input/misc/ati_remote2.c
-
ATLX ETHERNET DRIVERS
M: Jay Cliburn <jcliburn@gmail.com>
M: Chris Snook <chris.snook@gmail.com>
@@ -2251,25 +2259,12 @@
S: Supported
F: drivers/power/reset/at91-sama5d2_shdwc.c
-ATMEL SAMA5D2 ADC DRIVER
-M: Ludovic Desroches <ludovic.desroches@microchip.com>
-L: linux-iio@vger.kernel.org
-S: Supported
-F: drivers/iio/adc/at91-sama5d2_adc.c
-
ATMEL Audio ALSA driver
M: Nicolas Ferre <nicolas.ferre@microchip.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Supported
F: sound/soc/atmel
-ATMEL XDMA DRIVER
-M: Ludovic Desroches <ludovic.desroches@microchip.com>
-L: linux-arm-kernel@lists.infradead.org
-L: dmaengine@vger.kernel.org
-S: Supported
-F: drivers/dma/at_xdmac.c
-
ATMEL I2C DRIVER
M: Ludovic Desroches <ludovic.desroches@microchip.com>
L: linux-i2c@vger.kernel.org
@@ -2295,6 +2290,14 @@
S: Supported
F: drivers/net/ethernet/cadence/
+ATMEL MAXTOUCH DRIVER
+M: Nick Dyer <nick@shmanahar.org>
+T: git git://github.com/ndyer/linux.git
+S: Maintained
+F: Documentation/devicetree/bindings/input/atmel,maxtouch.txt
+F: drivers/input/touchscreen/atmel_mxt_ts.c
+F: include/linux/platform_data/atmel_mxt_ts.h
+
ATMEL NAND DRIVER
M: Wenyou Yang <wenyou.yang@atmel.com>
M: Josh Wu <rainyfeeling@outlook.com>
@@ -2302,6 +2305,12 @@
S: Supported
F: drivers/mtd/nand/atmel/*
+ATMEL SAMA5D2 ADC DRIVER
+M: Ludovic Desroches <ludovic.desroches@microchip.com>
+L: linux-iio@vger.kernel.org
+S: Supported
+F: drivers/iio/adc/at91-sama5d2_adc.c
+
ATMEL SDMMC DRIVER
M: Ludovic Desroches <ludovic.desroches@microchip.com>
L: linux-mmc@vger.kernel.org
@@ -2341,13 +2350,12 @@
S: Maintained
F: drivers/net/wireless/atmel/atmel*
-ATMEL MAXTOUCH DRIVER
-M: Nick Dyer <nick@shmanahar.org>
-T: git git://github.com/ndyer/linux.git
-S: Maintained
-F: Documentation/devicetree/bindings/input/atmel,maxtouch.txt
-F: drivers/input/touchscreen/atmel_mxt_ts.c
-F: include/linux/platform_data/atmel_mxt_ts.h
+ATMEL XDMA DRIVER
+M: Ludovic Desroches <ludovic.desroches@microchip.com>
+L: linux-arm-kernel@lists.infradead.org
+L: dmaengine@vger.kernel.org
+S: Supported
+F: drivers/dma/at_xdmac.c
ATOMIC INFRASTRUCTURE
M: Will Deacon <will.deacon@arm.com>
@@ -2401,13 +2409,6 @@
F: include/net/ax25.h
F: net/ax25/
-AXENTIA ASOC DRIVERS
-M: Peter Rosin <peda@axentia.se>
-L: alsa-devel@alsa-project.org (moderated for non-subscribers)
-S: Maintained
-F: Documentation/devicetree/bindings/sound/axentia,*
-F: sound/soc/atmel/tse850-pcm5142.c
-
AXENTIA ARM DEVICES
M: Peter Rosin <peda@axentia.se>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -2416,6 +2417,13 @@
F: arch/arm/boot/dts/at91-linea.dtsi
F: arch/arm/boot/dts/at91-tse850-3.dts
+AXENTIA ASOC DRIVERS
+M: Peter Rosin <peda@axentia.se>
+L: alsa-devel@alsa-project.org (moderated for non-subscribers)
+S: Maintained
+F: Documentation/devicetree/bindings/sound/axentia,*
+F: sound/soc/atmel/tse850-pcm5142.c
+
AZ6007 DVB DRIVER
M: Mauro Carvalho Chehab <mchehab@s-opensource.com>
M: Mauro Carvalho Chehab <mchehab@kernel.org>
@@ -2495,28 +2503,28 @@
S: Supported
F: drivers/media/platform/sti/bdisp
-DELTA ST MEDIA DRIVER
-M: Hugues Fruchet <hugues.fruchet@st.com>
-L: linux-media@vger.kernel.org
-T: git git://linuxtv.org/media_tree.git
-W: https://linuxtv.org
-S: Supported
-F: drivers/media/platform/sti/delta
-
-BEFS FILE SYSTEM
-M: Luis de Bethencourt <luisbg@osg.samsung.com>
-M: Salah Triki <salah.triki@gmail.com>
-S: Maintained
-T: git git://github.com/luisbg/linux-befs.git
-F: Documentation/filesystems/befs.txt
-F: fs/befs/
-
BECKHOFF CX5020 ETHERCAT MASTER DRIVER
M: Dariusz Marcinkiewicz <reksio@newterm.pl>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ethernet/ec_bhf.c
+BEFS FILE SYSTEM
+M: Luis de Bethencourt <luisbg@kernel.org>
+M: Salah Triki <salah.triki@gmail.com>
+S: Maintained
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/luisbg/linux-befs.git
+F: Documentation/filesystems/befs.txt
+F: fs/befs/
+
+BFQ I/O SCHEDULER
+M: Paolo Valente <paolo.valente@linaro.org>
+M: Jens Axboe <axboe@kernel.dk>
+L: linux-block@vger.kernel.org
+S: Maintained
+F: block/bfq-*
+F: Documentation/block/bfq-iosched.txt
+
BFS FILE SYSTEM
M: "Tigran A. Aivazian" <aivazian.tigran@gmail.com>
S: Maintained
@@ -2538,6 +2546,22 @@
S: Supported
F: drivers/net/ethernet/adi/
+BLACKFIN I2C TWI DRIVER
+M: Sonic Zhang <sonic.zhang@analog.com>
+L: adi-buildroot-devel@lists.sourceforge.net (moderated for non-subscribers)
+W: http://blackfin.uclinux.org/
+S: Supported
+F: drivers/i2c/busses/i2c-bfin-twi.c
+
+BLACKFIN MEDIA DRIVER
+M: Scott Jiang <scott.jiang.linux@gmail.com>
+L: adi-buildroot-devel@lists.sourceforge.net (moderated for non-subscribers)
+W: http://blackfin.uclinux.org/
+S: Supported
+F: drivers/media/platform/blackfin/
+F: drivers/media/i2c/adv7183*
+F: drivers/media/i2c/vs6624*
+
BLACKFIN RTC DRIVER
L: adi-buildroot-devel@lists.sourceforge.net (moderated for non-subscribers)
W: http://blackfin.uclinux.org
@@ -2564,22 +2588,6 @@
S: Supported
F: drivers/watchdog/bfin_wdt.c
-BLACKFIN I2C TWI DRIVER
-M: Sonic Zhang <sonic.zhang@analog.com>
-L: adi-buildroot-devel@lists.sourceforge.net (moderated for non-subscribers)
-W: http://blackfin.uclinux.org/
-S: Supported
-F: drivers/i2c/busses/i2c-bfin-twi.c
-
-BLACKFIN MEDIA DRIVER
-M: Scott Jiang <scott.jiang.linux@gmail.com>
-L: adi-buildroot-devel@lists.sourceforge.net (moderated for non-subscribers)
-W: http://blackfin.uclinux.org/
-S: Supported
-F: drivers/media/platform/blackfin/
-F: drivers/media/i2c/adv7183*
-F: drivers/media/i2c/vs6624*
-
BLINKM RGB LED DRIVER
M: Jan-Simon Moeller <jansimon.moeller@gmx.de>
S: Maintained
@@ -2594,14 +2602,6 @@
F: kernel/trace/blktrace.c
F: lib/sbitmap.c
-BFQ I/O SCHEDULER
-M: Paolo Valente <paolo.valente@linaro.org>
-M: Jens Axboe <axboe@kernel.dk>
-L: linux-block@vger.kernel.org
-S: Maintained
-F: block/bfq-*
-F: Documentation/block/bfq-iosched.txt
-
BLOCK2MTD DRIVER
M: Joern Engel <joern@lazybastard.org>
L: linux-mtd@lists.infradead.org
@@ -2631,21 +2631,6 @@
F: net/bluetooth/
F: include/net/bluetooth/
-DMA MAPPING HELPERS
-M: Christoph Hellwig <hch@lst.de>
-M: Marek Szyprowski <m.szyprowski@samsung.com>
-R: Robin Murphy <robin.murphy@arm.com>
-L: linux-kernel@vger.kernel.org
-T: git git://git.infradead.org/users/hch/dma-mapping.git
-W: http://git.infradead.org/users/hch/dma-mapping.git
-S: Supported
-F: lib/dma-debug.c
-F: lib/dma-noop.c
-F: lib/dma-virt.c
-F: drivers/base/dma-mapping.c
-F: drivers/base/dma-coherent.c
-F: include/linux/dma-mapping.h
-
BONDING DRIVER
M: Jay Vosburgh <j.vosburgh@gmail.com>
M: Veaceslav Falico <vfalico@gmail.com>
@@ -2693,35 +2678,6 @@
F: drivers/net/dsa/b53/*
F: include/linux/platform_data/b53.h
-BROADCOM GENET ETHERNET DRIVER
-M: Florian Fainelli <f.fainelli@gmail.com>
-L: netdev@vger.kernel.org
-S: Supported
-F: drivers/net/ethernet/broadcom/genet/
-
-BROADCOM BNX2 GIGABIT ETHERNET DRIVER
-M: Rasesh Mody <rasesh.mody@cavium.com>
-M: Harish Patil <harish.patil@cavium.com>
-M: Dept-GELinuxNICDev@cavium.com
-L: netdev@vger.kernel.org
-S: Supported
-F: drivers/net/ethernet/broadcom/bnx2.*
-F: drivers/net/ethernet/broadcom/bnx2_*
-
-BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER
-M: Yuval Mintz <Yuval.Mintz@cavium.com>
-M: Ariel Elior <ariel.elior@cavium.com>
-M: everest-linux-l2@cavium.com
-L: netdev@vger.kernel.org
-S: Supported
-F: drivers/net/ethernet/broadcom/bnx2x/
-
-BROADCOM BNXT_EN 50 GIGABIT ETHERNET DRIVER
-M: Michael Chan <michael.chan@broadcom.com>
-L: netdev@vger.kernel.org
-S: Supported
-F: drivers/net/ethernet/broadcom/bnxt/
-
BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITECTURE
M: Florian Fainelli <f.fainelli@gmail.com>
M: Ray Jui <rjui@broadcom.com>
@@ -2800,6 +2756,13 @@
F: drivers/bus/brcmstb_gisb.c
N: brcmstb
+BROADCOM BMIPS CPUFREQ DRIVER
+M: Markus Mayer <mmayer@broadcom.com>
+M: bcm-kernel-feedback-list@broadcom.com
+L: linux-pm@vger.kernel.org
+S: Maintained
+F: drivers/cpufreq/bmips-cpufreq.c
+
BROADCOM BMIPS MIPS ARCHITECTURE
M: Kevin Cernekee <cernekee@gmail.com>
M: Florian Fainelli <f.fainelli@gmail.com>
@@ -2816,20 +2779,40 @@
F: include/linux/bcm963xx_nvram.h
F: include/linux/bcm963xx_tag.h
-BROADCOM BMIPS CPUFREQ DRIVER
-M: Markus Mayer <mmayer@broadcom.com>
-M: bcm-kernel-feedback-list@broadcom.com
-L: linux-pm@vger.kernel.org
-S: Maintained
-F: drivers/cpufreq/bmips-cpufreq.c
-
-BROADCOM TG3 GIGABIT ETHERNET DRIVER
-M: Siva Reddy Kallam <siva.kallam@broadcom.com>
-M: Prashant Sreedharan <prashant@broadcom.com>
-M: Michael Chan <mchan@broadcom.com>
+BROADCOM BNX2 GIGABIT ETHERNET DRIVER
+M: Rasesh Mody <rasesh.mody@cavium.com>
+M: Harish Patil <harish.patil@cavium.com>
+M: Dept-GELinuxNICDev@cavium.com
L: netdev@vger.kernel.org
S: Supported
-F: drivers/net/ethernet/broadcom/tg3.*
+F: drivers/net/ethernet/broadcom/bnx2.*
+F: drivers/net/ethernet/broadcom/bnx2_*
+
+BROADCOM BNX2FC 10 GIGABIT FCOE DRIVER
+M: QLogic-Storage-Upstream@qlogic.com
+L: linux-scsi@vger.kernel.org
+S: Supported
+F: drivers/scsi/bnx2fc/
+
+BROADCOM BNX2I 1/10 GIGABIT iSCSI DRIVER
+M: QLogic-Storage-Upstream@qlogic.com
+L: linux-scsi@vger.kernel.org
+S: Supported
+F: drivers/scsi/bnx2i/
+
+BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER
+M: Yuval Mintz <Yuval.Mintz@cavium.com>
+M: Ariel Elior <ariel.elior@cavium.com>
+M: everest-linux-l2@cavium.com
+L: netdev@vger.kernel.org
+S: Supported
+F: drivers/net/ethernet/broadcom/bnx2x/
+
+BROADCOM BNXT_EN 50 GIGABIT ETHERNET DRIVER
+M: Michael Chan <michael.chan@broadcom.com>
+L: netdev@vger.kernel.org
+S: Supported
+F: drivers/net/ethernet/broadcom/bnxt/
BROADCOM BRCM80211 IEEE802.11n WIRELESS DRIVER
M: Arend van Spriel <arend.vanspriel@broadcom.com>
@@ -2843,17 +2826,18 @@
S: Supported
F: drivers/net/wireless/broadcom/brcm80211/
-BROADCOM BNX2FC 10 GIGABIT FCOE DRIVER
-M: QLogic-Storage-Upstream@qlogic.com
-L: linux-scsi@vger.kernel.org
+BROADCOM BRCMSTB GPIO DRIVER
+M: Gregory Fong <gregory.0xf0@gmail.com>
+L: bcm-kernel-feedback-list@broadcom.com
S: Supported
-F: drivers/scsi/bnx2fc/
+F: drivers/gpio/gpio-brcmstb.c
+F: Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt
-BROADCOM BNX2I 1/10 GIGABIT iSCSI DRIVER
-M: QLogic-Storage-Upstream@qlogic.com
-L: linux-scsi@vger.kernel.org
+BROADCOM GENET ETHERNET DRIVER
+M: Florian Fainelli <f.fainelli@gmail.com>
+L: netdev@vger.kernel.org
S: Supported
-F: drivers/scsi/bnx2i/
+F: drivers/net/ethernet/broadcom/genet/
BROADCOM IPROC ARM ARCHITECTURE
M: Ray Jui <rjui@broadcom.com>
@@ -2880,13 +2864,6 @@
F: drivers/clk/bcm/clk-ns*
F: drivers/pinctrl/bcm/pinctrl-ns*
-BROADCOM BRCMSTB GPIO DRIVER
-M: Gregory Fong <gregory.0xf0@gmail.com>
-L: bcm-kernel-feedback-list@broadcom.com
-S: Supported
-F: drivers/gpio/gpio-brcmstb.c
-F: Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt
-
BROADCOM KONA GPIO DRIVER
M: Ray Jui <rjui@broadcom.com>
L: bcm-kernel-feedback-list@broadcom.com
@@ -2894,41 +2871,6 @@
F: drivers/gpio/gpio-bcm-kona.c
F: Documentation/devicetree/bindings/gpio/brcm,kona-gpio.txt
-BROADCOM NVRAM DRIVER
-M: Rafał Miłecki <zajec5@gmail.com>
-L: linux-mips@linux-mips.org
-S: Maintained
-F: drivers/firmware/broadcom/*
-
-BROADCOM STB NAND FLASH DRIVER
-M: Brian Norris <computersforpeace@gmail.com>
-M: Kamal Dasu <kdasu.kdev@gmail.com>
-L: linux-mtd@lists.infradead.org
-L: bcm-kernel-feedback-list@broadcom.com
-S: Maintained
-F: drivers/mtd/nand/brcmnand/
-
-BROADCOM STB AVS CPUFREQ DRIVER
-M: Markus Mayer <mmayer@broadcom.com>
-M: bcm-kernel-feedback-list@broadcom.com
-L: linux-pm@vger.kernel.org
-S: Maintained
-F: Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
-F: drivers/cpufreq/brcmstb*
-
-BROADCOM SPECIFIC AMBA DRIVER (BCMA)
-M: Rafał Miłecki <zajec5@gmail.com>
-L: linux-wireless@vger.kernel.org
-S: Maintained
-F: drivers/bcma/
-F: include/linux/bcma/
-
-BROADCOM SYSTEMPORT ETHERNET DRIVER
-M: Florian Fainelli <f.fainelli@gmail.com>
-L: netdev@vger.kernel.org
-S: Supported
-F: drivers/net/ethernet/broadcom/bcmsysport.*
-
BROADCOM NETXTREME-E ROCE DRIVER
M: Selvin Xavier <selvin.xavier@broadcom.com>
M: Devesh Sharma <devesh.sharma@broadcom.com>
@@ -2940,6 +2882,49 @@
F: drivers/infiniband/hw/bnxt_re/
F: include/uapi/rdma/bnxt_re-abi.h
+BROADCOM NVRAM DRIVER
+M: Rafał Miłecki <zajec5@gmail.com>
+L: linux-mips@linux-mips.org
+S: Maintained
+F: drivers/firmware/broadcom/*
+
+BROADCOM SPECIFIC AMBA DRIVER (BCMA)
+M: Rafał Miłecki <zajec5@gmail.com>
+L: linux-wireless@vger.kernel.org
+S: Maintained
+F: drivers/bcma/
+F: include/linux/bcma/
+
+BROADCOM STB AVS CPUFREQ DRIVER
+M: Markus Mayer <mmayer@broadcom.com>
+M: bcm-kernel-feedback-list@broadcom.com
+L: linux-pm@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
+F: drivers/cpufreq/brcmstb*
+
+BROADCOM STB NAND FLASH DRIVER
+M: Brian Norris <computersforpeace@gmail.com>
+M: Kamal Dasu <kdasu.kdev@gmail.com>
+L: linux-mtd@lists.infradead.org
+L: bcm-kernel-feedback-list@broadcom.com
+S: Maintained
+F: drivers/mtd/nand/brcmnand/
+
+BROADCOM SYSTEMPORT ETHERNET DRIVER
+M: Florian Fainelli <f.fainelli@gmail.com>
+L: netdev@vger.kernel.org
+S: Supported
+F: drivers/net/ethernet/broadcom/bcmsysport.*
+
+BROADCOM TG3 GIGABIT ETHERNET DRIVER
+M: Siva Reddy Kallam <siva.kallam@broadcom.com>
+M: Prashant Sreedharan <prashant@broadcom.com>
+M: Michael Chan <mchan@broadcom.com>
+L: netdev@vger.kernel.org
+S: Supported
+F: drivers/net/ethernet/broadcom/tg3.*
+
BROCADE BFA FC SCSI DRIVER
M: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
M: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
@@ -3001,6 +2986,15 @@
F: Documentation/media/v4l-drivers/bttv*
F: drivers/media/pci/bt8xx/bttv*
+BUS FREQUENCY DRIVER FOR SAMSUNG EXYNOS
+M: Chanwoo Choi <cw00.choi@samsung.com>
+L: linux-pm@vger.kernel.org
+L: linux-samsung-soc@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mzx/devfreq.git
+S: Maintained
+F: drivers/devfreq/exynos-bus.c
+F: Documentation/devicetree/bindings/devfreq/exynos-bus.txt
+
BUSLOGIC SCSI DRIVER
M: Khalid Aziz <khalid@gonehiking.org>
L: linux-scsi@vger.kernel.org
@@ -3075,6 +3069,21 @@
F: arch/x86/include/asm/calgary.h
F: arch/x86/include/asm/tce.h
+CAN NETWORK DRIVERS
+M: Wolfgang Grandegger <wg@grandegger.com>
+M: Marc Kleine-Budde <mkl@pengutronix.de>
+L: linux-can@vger.kernel.org
+W: https://github.com/linux-can
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git
+S: Maintained
+F: Documentation/devicetree/bindings/net/can/
+F: drivers/net/can/
+F: include/linux/can/dev.h
+F: include/linux/can/platform/
+F: include/uapi/linux/can/error.h
+F: include/uapi/linux/can/netlink.h
+
CAN NETWORK LAYER
M: Oliver Hartkopp <socketcan@hartkopp.net>
M: Marc Kleine-Budde <mkl@pengutronix.de>
@@ -3091,21 +3100,6 @@
F: include/uapi/linux/can/raw.h
F: include/uapi/linux/can/gw.h
-CAN NETWORK DRIVERS
-M: Wolfgang Grandegger <wg@grandegger.com>
-M: Marc Kleine-Budde <mkl@pengutronix.de>
-L: linux-can@vger.kernel.org
-W: https://github.com/linux-can
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git
-S: Maintained
-F: Documentation/devicetree/bindings/net/can/
-F: drivers/net/can/
-F: include/linux/can/dev.h
-F: include/linux/can/platform/
-F: include/uapi/linux/can/error.h
-F: include/uapi/linux/can/netlink.h
-
CAPABILITIES
M: Serge Hallyn <serge@hallyn.com>
L: linux-security-module@vger.kernel.org
@@ -3120,12 +3114,12 @@
S: Maintained
F: drivers/iio/light/cm*
-CAVIUM THUNDERX2 ARM64 SOC
-M: Jayachandran C <jnair@caviumnetworks.com>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+CARL9170 LINUX COMMUNITY WIRELESS DRIVER
+M: Christian Lamparter <chunkeey@googlemail.com>
+L: linux-wireless@vger.kernel.org
+W: http://wireless.kernel.org/en/users/Drivers/carl9170
S: Maintained
-F: arch/arm64/boot/dts/cavium/thunder2-99xx*
-F: Documentation/devicetree/bindings/arm/cavium-thunder2.txt
+F: drivers/net/wireless/ath/carl9170/
CAVIUM I2C DRIVER
M: Jan Glauber <jglauber@cavium.com>
@@ -3135,6 +3129,16 @@
F: drivers/i2c/busses/i2c-octeon*
F: drivers/i2c/busses/i2c-thunderx*
+CAVIUM LIQUIDIO NETWORK DRIVER
+M: Derek Chickles <derek.chickles@caviumnetworks.com>
+M: Satanand Burla <satananda.burla@caviumnetworks.com>
+M: Felix Manlunas <felix.manlunas@caviumnetworks.com>
+M: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
+L: netdev@vger.kernel.org
+W: http://www.cavium.com
+S: Supported
+F: drivers/net/ethernet/cavium/liquidio/
+
CAVIUM MMC DRIVER
M: Jan Glauber <jglauber@cavium.com>
M: David Daney <david.daney@cavium.com>
@@ -3143,16 +3147,6 @@
S: Supported
F: drivers/mmc/host/cavium*
-CAVIUM LIQUIDIO NETWORK DRIVER
-M: Derek Chickles <derek.chickles@caviumnetworks.com>
-M: Satanand Burla <satananda.burla@caviumnetworks.com>
-M: Felix Manlunas <felix.manlunas@caviumnetworks.com>
-M: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
-L: netdev@vger.kernel.org
-W: http://www.cavium.com
-S: Supported
-F: drivers/net/ethernet/cavium/liquidio/
-
CAVIUM OCTEON-TX CRYPTO DRIVER
M: George Cherian <george.cherian@cavium.com>
L: linux-crypto@vger.kernel.org
@@ -3160,6 +3154,13 @@
S: Supported
F: drivers/crypto/cavium/cpt/
+CAVIUM THUNDERX2 ARM64 SOC
+M: Jayachandran C <jnair@caviumnetworks.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm64/boot/dts/cavium/thunder2-99xx*
+F: Documentation/devicetree/bindings/arm/cavium-thunder2.txt
+
CC2520 IEEE-802.15.4 RADIO DRIVER
M: Varka Bhadram <varkabhadram@gmail.com>
L: linux-wpan@vger.kernel.org
@@ -3248,12 +3249,6 @@
F: drivers/usb/wusbcore/
F: include/linux/usb/wusb*
-HT16K33 LED CONTROLLER DRIVER
-M: Robin van der Gracht <robin@protonic.nl>
-S: Maintained
-F: drivers/auxdisplay/ht16k33.c
-F: Documentation/devicetree/bindings/display/ht16k33.txt
-
CFAG12864B LCD DRIVER
M: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>
W: http://miguelojeda.es/auxdisplay.htm
@@ -3325,6 +3320,34 @@
T: git git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform.git
F: drivers/platform/chrome/
+CIRRUS LOGIC AUDIO CODEC DRIVERS
+M: Brian Austin <brian.austin@cirrus.com>
+M: Paul Handrigan <Paul.Handrigan@cirrus.com>
+L: alsa-devel@alsa-project.org (moderated for non-subscribers)
+S: Maintained
+F: sound/soc/codecs/cs*
+
+CIRRUS LOGIC EP93XX ETHERNET DRIVER
+M: Hartley Sweeten <hsweeten@visionengravers.com>
+L: netdev@vger.kernel.org
+S: Maintained
+F: drivers/net/ethernet/cirrus/ep93xx_eth.c
+
+CISCO FCOE HBA DRIVER
+M: Satish Kharat <satishkh@cisco.com>
+M: Sesidhar Baddela <sebaddel@cisco.com>
+M: Karan Tilak Kumar <kartilak@cisco.com>
+L: linux-scsi@vger.kernel.org
+S: Supported
+F: drivers/scsi/fnic/
+
+CISCO SCSI HBA DRIVER
+M: Karan Tilak Kumar <kartilak@cisco.com>
+M: Sesidhar Baddela <sebaddel@cisco.com>
+L: linux-scsi@vger.kernel.org
+S: Supported
+F: drivers/scsi/snic/
+
CISCO VIC ETHERNET NIC DRIVER
M: Christian Benvenuti <benve@cisco.com>
M: Govindarajulu Varadarajan <_govind@gmx.com>
@@ -3338,19 +3361,6 @@
S: Supported
F: drivers/infiniband/hw/usnic/
-CIRRUS LOGIC EP93XX ETHERNET DRIVER
-M: Hartley Sweeten <hsweeten@visionengravers.com>
-L: netdev@vger.kernel.org
-S: Maintained
-F: drivers/net/ethernet/cirrus/ep93xx_eth.c
-
-CIRRUS LOGIC AUDIO CODEC DRIVERS
-M: Brian Austin <brian.austin@cirrus.com>
-M: Paul Handrigan <Paul.Handrigan@cirrus.com>
-L: alsa-devel@alsa-project.org (moderated for non-subscribers)
-S: Maintained
-F: sound/soc/codecs/cs*
-
CLEANCACHE API
M: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
L: linux-kernel@vger.kernel.org
@@ -3372,21 +3382,6 @@
S: Supported
F: drivers/clocksource
-CISCO FCOE HBA DRIVER
-M: Satish Kharat <satishkh@cisco.com>
-M: Sesidhar Baddela <sebaddel@cisco.com>
-M: Karan Tilak Kumar <kartilak@cisco.com>
-L: linux-scsi@vger.kernel.org
-S: Supported
-F: drivers/scsi/fnic/
-
-CISCO SCSI HBA DRIVER
-M: Karan Tilak Kumar <kartilak@cisco.com>
-M: Sesidhar Baddela <sebaddel@cisco.com>
-L: linux-scsi@vger.kernel.org
-S: Supported
-F: drivers/scsi/snic/
-
CMPC ACPI DRIVER
M: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
M: Daniel Oliveira Nascimento <don@syst.com.br>
@@ -3462,18 +3457,18 @@
S: Maintained
F: drivers/pci/hotplug/cpci_hotplug*
-COMPACTPCI HOTPLUG ZIATECH ZT5550 DRIVER
-M: Scott Murray <scott@spiteful.org>
-L: linux-pci@vger.kernel.org
-S: Maintained
-F: drivers/pci/hotplug/cpcihp_zt5550.*
-
COMPACTPCI HOTPLUG GENERIC DRIVER
M: Scott Murray <scott@spiteful.org>
L: linux-pci@vger.kernel.org
S: Maintained
F: drivers/pci/hotplug/cpcihp_generic.c
+COMPACTPCI HOTPLUG ZIATECH ZT5550 DRIVER
+M: Scott Murray <scott@spiteful.org>
+L: linux-pci@vger.kernel.org
+S: Maintained
+F: drivers/pci/hotplug/cpcihp_zt5550.*
+
COMPAL LAPTOP SUPPORT
M: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
L: platform-driver-x86@vger.kernel.org
@@ -3575,6 +3570,18 @@
F: drivers/cpufreq/arm_big_little.c
F: drivers/cpufreq/arm_big_little_dt.c
+CPU POWER MONITORING SUBSYSTEM
+M: Thomas Renninger <trenn@suse.com>
+L: linux-pm@vger.kernel.org
+S: Maintained
+F: tools/power/cpupower/
+
+CPUID/MSR DRIVER
+M: "H. Peter Anvin" <hpa@zytor.com>
+S: Maintained
+F: arch/x86/kernel/cpuid.c
+F: arch/x86/kernel/msr.c
+
CPUIDLE DRIVER - ARM BIG LITTLE
M: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
M: Daniel Lezcano <daniel.lezcano@linaro.org>
@@ -3604,18 +3611,6 @@
F: drivers/cpuidle/*
F: include/linux/cpuidle.h
-CPUID/MSR DRIVER
-M: "H. Peter Anvin" <hpa@zytor.com>
-S: Maintained
-F: arch/x86/kernel/cpuid.c
-F: arch/x86/kernel/msr.c
-
-CPU POWER MONITORING SUBSYSTEM
-M: Thomas Renninger <trenn@suse.com>
-L: linux-pm@vger.kernel.org
-S: Maintained
-F: tools/power/cpupower/
-
CRAMFS FILESYSTEM
W: http://sourceforge.net/projects/cramfs/
S: Orphan / Obsolete
@@ -3745,6 +3740,13 @@
F: drivers/infiniband/hw/cxgb3/
F: include/uapi/rdma/cxgb3-abi.h
+CXGB4 CRYPTO DRIVER (chcr)
+M: Harsh Jain <harsh@chelsio.com>
+L: linux-crypto@vger.kernel.org
+W: http://www.chelsio.com
+S: Supported
+F: drivers/crypto/chelsio
+
CXGB4 ETHERNET DRIVER (CXGB4)
M: Ganesh Goudar <ganeshgr@chelsio.com>
L: netdev@vger.kernel.org
@@ -3767,13 +3769,6 @@
F: drivers/infiniband/hw/cxgb4/
F: include/uapi/rdma/cxgb4-abi.h
-CXGB4 CRYPTO DRIVER (chcr)
-M: Harsh Jain <harsh@chelsio.com>
-L: linux-crypto@vger.kernel.org
-W: http://www.chelsio.com
-S: Supported
-F: drivers/crypto/chelsio
-
CXGB4VF ETHERNET DRIVER (CXGB4VF)
M: Casey Leedom <leedom@chelsio.com>
L: netdev@vger.kernel.org
@@ -3803,14 +3798,6 @@
F: include/uapi/scsi/cxlflash_ioctls.h
F: Documentation/powerpc/cxlflash.txt
-STMMAC ETHERNET DRIVER
-M: Giuseppe Cavallaro <peppe.cavallaro@st.com>
-M: Alexandre Torgue <alexandre.torgue@st.com>
-L: netdev@vger.kernel.org
-W: http://www.stlinux.com
-S: Supported
-F: drivers/net/ethernet/stmicro/stmmac/
-
CYBERPRO FB DRIVER
M: Russell King <linux@armlinux.org.uk>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -3934,16 +3921,16 @@
S: Maintained
F: drivers/platform/x86/dell-laptop.c
-DELL LAPTOP RBTN DRIVER
-M: Pali Rohár <pali.rohar@gmail.com>
-S: Maintained
-F: drivers/platform/x86/dell-rbtn.*
-
DELL LAPTOP FREEFALL DRIVER
M: Pali Rohár <pali.rohar@gmail.com>
S: Maintained
F: drivers/platform/x86/dell-smo8800.c
+DELL LAPTOP RBTN DRIVER
+M: Pali Rohár <pali.rohar@gmail.com>
+S: Maintained
+F: drivers/platform/x86/dell-rbtn.*
+
DELL LAPTOP SMM DRIVER
M: Pali Rohár <pali.rohar@gmail.com>
S: Maintained
@@ -3962,6 +3949,20 @@
S: Maintained
F: drivers/platform/x86/dell-wmi.c
+DELTA ST MEDIA DRIVER
+M: Hugues Fruchet <hugues.fruchet@st.com>
+L: linux-media@vger.kernel.org
+T: git git://linuxtv.org/media_tree.git
+W: https://linuxtv.org
+S: Supported
+F: drivers/media/platform/sti/delta
+
+DENALI NAND DRIVER
+M: Masahiro Yamada <yamada.masahiro@socionext.com>
+L: linux-mtd@lists.infradead.org
+S: Supported
+F: drivers/mtd/nand/denali*
+
DESIGNWARE USB2 DRD IP DRIVER
M: John Youn <johnyoun@synopsys.com>
L: linux-usb@vger.kernel.org
@@ -4010,15 +4011,6 @@
F: include/linux/devfreq-event.h
F: Documentation/devicetree/bindings/devfreq/event/
-BUS FREQUENCY DRIVER FOR SAMSUNG EXYNOS
-M: Chanwoo Choi <cw00.choi@samsung.com>
-L: linux-pm@vger.kernel.org
-L: linux-samsung-soc@vger.kernel.org
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/mzx/devfreq.git
-S: Maintained
-F: drivers/devfreq/exynos-bus.c
-F: Documentation/devicetree/bindings/devfreq/exynos-bus.txt
-
DEVICE NUMBER REGISTRY
M: Torben Mathiasen <device@lanana.org>
W: http://lanana.org/docs/device-list/index.html
@@ -4168,20 +4160,6 @@
F: Documentation/driver-api/dma-buf.rst
T: git git://anongit.freedesktop.org/drm/drm-misc
-SYNC FILE FRAMEWORK
-M: Sumit Semwal <sumit.semwal@linaro.org>
-R: Gustavo Padovan <gustavo@padovan.org>
-S: Maintained
-L: linux-media@vger.kernel.org
-L: dri-devel@lists.freedesktop.org
-F: drivers/dma-buf/sync_*
-F: drivers/dma-buf/dma-fence*
-F: drivers/dma-buf/sw_sync.c
-F: include/linux/sync_file.h
-F: include/uapi/linux/sync_file.h
-F: Documentation/sync_file.txt
-T: git git://anongit.freedesktop.org/drm/drm-misc
-
DMA GENERIC OFFLOAD ENGINE SUBSYSTEM
M: Vinod Koul <vinod.koul@intel.com>
L: dmaengine@vger.kernel.org
@@ -4193,6 +4171,21 @@
F: Documentation/dmaengine/
T: git git://git.infradead.org/users/vkoul/slave-dma.git
+DMA MAPPING HELPERS
+M: Christoph Hellwig <hch@lst.de>
+M: Marek Szyprowski <m.szyprowski@samsung.com>
+R: Robin Murphy <robin.murphy@arm.com>
+L: linux-kernel@vger.kernel.org
+T: git git://git.infradead.org/users/hch/dma-mapping.git
+W: http://git.infradead.org/users/hch/dma-mapping.git
+S: Supported
+F: lib/dma-debug.c
+F: lib/dma-noop.c
+F: lib/dma-virt.c
+F: drivers/base/dma-mapping.c
+F: drivers/base/dma-coherent.c
+F: include/linux/dma-mapping.h
+
DME1737 HARDWARE MONITOR DRIVER
M: Juerg Haefliger <juergh@gmail.com>
L: linux-hwmon@vger.kernel.org
@@ -4223,6 +4216,13 @@
X: Documentation/media
T: git git://git.lwn.net/linux.git docs-next
+DONGWOON DW9714 LENS VOICE COIL DRIVER
+M: Sakari Ailus <sakari.ailus@linux.intel.com>
+L: linux-media@vger.kernel.org
+T: git git://linuxtv.org/media_tree.git
+S: Maintained
+F: drivers/media/i2c/dw9714.c
+
DOUBLETALK DRIVER
M: "James R. Van Zandt" <jrv@vanzandt.mv.com>
L: blinux-list@redhat.com
@@ -4274,6 +4274,126 @@
F: include/linux/kobj*
F: lib/kobj*
+DRIVERS FOR ADAPTIVE VOLTAGE SCALING (AVS)
+M: Kevin Hilman <khilman@kernel.org>
+M: Nishanth Menon <nm@ti.com>
+S: Maintained
+F: drivers/power/avs/
+F: include/linux/power/smartreflex.h
+L: linux-pm@vger.kernel.org
+
+DRM DRIVER FOR ARM PL111 CLCD
+M: Eric Anholt <eric@anholt.net>
+T: git git://anongit.freedesktop.org/drm/drm-misc
+S: Supported
+F: drivers/gpu/drm/pl111/
+
+DRM DRIVER FOR AST SERVER GRAPHICS CHIPS
+M: Dave Airlie <airlied@redhat.com>
+S: Odd Fixes
+F: drivers/gpu/drm/ast/
+
+DRM DRIVER FOR BOCHS VIRTUAL GPU
+M: Gerd Hoffmann <kraxel@redhat.com>
+L: virtualization@lists.linux-foundation.org
+T: git git://anongit.freedesktop.org/drm/drm-misc
+S: Maintained
+F: drivers/gpu/drm/bochs/
+
+DRM DRIVER FOR INTEL I810 VIDEO CARDS
+S: Orphan / Obsolete
+F: drivers/gpu/drm/i810/
+F: include/uapi/drm/i810_drm.h
+
+DRM DRIVER FOR MATROX G200/G400 GRAPHICS CARDS
+S: Orphan / Obsolete
+F: drivers/gpu/drm/mga/
+F: include/uapi/drm/mga_drm.h
+
+DRM DRIVER FOR MGA G200 SERVER GRAPHICS CHIPS
+M: Dave Airlie <airlied@redhat.com>
+S: Odd Fixes
+F: drivers/gpu/drm/mgag200/
+
+DRM DRIVER FOR MI0283QT
+M: Noralf Trønnes <noralf@tronnes.org>
+S: Maintained
+F: drivers/gpu/drm/tinydrm/mi0283qt.c
+F: Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt
+
+DRM DRIVER FOR MSM ADRENO GPU
+M: Rob Clark <robdclark@gmail.com>
+L: linux-arm-msm@vger.kernel.org
+L: dri-devel@lists.freedesktop.org
+L: freedreno@lists.freedesktop.org
+T: git git://people.freedesktop.org/~robclark/linux
+S: Maintained
+F: drivers/gpu/drm/msm/
+F: include/uapi/drm/msm_drm.h
+F: Documentation/devicetree/bindings/display/msm/
+
+DRM DRIVER FOR NVIDIA GEFORCE/QUADRO GPUS
+M: Ben Skeggs <bskeggs@redhat.com>
+L: dri-devel@lists.freedesktop.org
+L: nouveau@lists.freedesktop.org
+T: git git://github.com/skeggsb/linux
+S: Supported
+F: drivers/gpu/drm/nouveau/
+F: include/uapi/drm/nouveau_drm.h
+
+DRM DRIVER FOR QEMU'S CIRRUS DEVICE
+M: Dave Airlie <airlied@redhat.com>
+M: Gerd Hoffmann <kraxel@redhat.com>
+L: virtualization@lists.linux-foundation.org
+T: git git://anongit.freedesktop.org/drm/drm-misc
+S: Obsolete
+W: https://www.kraxel.org/blog/2014/10/qemu-using-cirrus-considered-harmful/
+F: drivers/gpu/drm/cirrus/
+
+DRM DRIVER FOR QXL VIRTUAL GPU
+M: Dave Airlie <airlied@redhat.com>
+M: Gerd Hoffmann <kraxel@redhat.com>
+L: virtualization@lists.linux-foundation.org
+T: git git://anongit.freedesktop.org/drm/drm-misc
+S: Maintained
+F: drivers/gpu/drm/qxl/
+F: include/uapi/drm/qxl_drm.h
+
+DRM DRIVER FOR RAGE 128 VIDEO CARDS
+S: Orphan / Obsolete
+F: drivers/gpu/drm/r128/
+F: include/uapi/drm/r128_drm.h
+
+DRM DRIVER FOR SAVAGE VIDEO CARDS
+S: Orphan / Obsolete
+F: drivers/gpu/drm/savage/
+F: include/uapi/drm/savage_drm.h
+
+DRM DRIVER FOR SIS VIDEO CARDS
+S: Orphan / Obsolete
+F: drivers/gpu/drm/sis/
+F: include/uapi/drm/sis_drm.h
+
+DRM DRIVER FOR TDFX VIDEO CARDS
+S: Orphan / Obsolete
+F: drivers/gpu/drm/tdfx/
+
+DRM DRIVER FOR USB DISPLAYLINK VIDEO ADAPTERS
+M: Dave Airlie <airlied@redhat.com>
+S: Odd Fixes
+F: drivers/gpu/drm/udl/
+
+DRM DRIVER FOR VMWARE VIRTUAL GPU
+M: "VMware Graphics" <linux-graphics-maintainer@vmware.com>
+M: Sinclair Yeh <syeh@vmware.com>
+M: Thomas Hellstrom <thellstrom@vmware.com>
+L: dri-devel@lists.freedesktop.org
+T: git git://people.freedesktop.org/~syeh/repos_linux
+T: git git://people.freedesktop.org/~thomash/linux
+S: Supported
+F: drivers/gpu/drm/vmwgfx/
+F: include/uapi/drm/vmwgfx_drm.h
+
DRM DRIVERS
M: David Airlie <airlied@linux.ie>
L: dri-devel@lists.freedesktop.org
@@ -4305,95 +4425,6 @@
F: include/uapi/drm/drm*
F: include/linux/vga*
-DRM DRIVER FOR ARM PL111 CLCD
-M: Eric Anholt <eric@anholt.net>
-T: git git://anongit.freedesktop.org/drm/drm-misc
-S: Supported
-F: drivers/gpu/drm/pl111/
-
-DRM DRIVER FOR AST SERVER GRAPHICS CHIPS
-M: Dave Airlie <airlied@redhat.com>
-S: Odd Fixes
-F: drivers/gpu/drm/ast/
-
-DRM DRIVERS FOR BRIDGE CHIPS
-M: Archit Taneja <architt@codeaurora.org>
-M: Andrzej Hajda <a.hajda@samsung.com>
-R: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
-S: Maintained
-T: git git://anongit.freedesktop.org/drm/drm-misc
-F: drivers/gpu/drm/bridge/
-
-DRM DRIVER FOR BOCHS VIRTUAL GPU
-M: Gerd Hoffmann <kraxel@redhat.com>
-L: virtualization@lists.linux-foundation.org
-T: git git://anongit.freedesktop.org/drm/drm-misc
-S: Maintained
-F: drivers/gpu/drm/bochs/
-
-DRM DRIVER FOR QEMU'S CIRRUS DEVICE
-M: Dave Airlie <airlied@redhat.com>
-M: Gerd Hoffmann <kraxel@redhat.com>
-L: virtualization@lists.linux-foundation.org
-T: git git://anongit.freedesktop.org/drm/drm-misc
-S: Obsolete
-W: https://www.kraxel.org/blog/2014/10/qemu-using-cirrus-considered-harmful/
-F: drivers/gpu/drm/cirrus/
-
-RADEON and AMDGPU DRM DRIVERS
-M: Alex Deucher <alexander.deucher@amd.com>
-M: Christian König <christian.koenig@amd.com>
-L: amd-gfx@lists.freedesktop.org
-T: git git://people.freedesktop.org/~agd5f/linux
-S: Supported
-F: drivers/gpu/drm/radeon/
-F: include/uapi/drm/radeon_drm.h
-F: drivers/gpu/drm/amd/
-F: include/uapi/drm/amdgpu_drm.h
-
-DRM PANEL DRIVERS
-M: Thierry Reding <thierry.reding@gmail.com>
-L: dri-devel@lists.freedesktop.org
-T: git git://anongit.freedesktop.org/tegra/linux.git
-S: Maintained
-F: drivers/gpu/drm/drm_panel.c
-F: drivers/gpu/drm/panel/
-F: include/drm/drm_panel.h
-F: Documentation/devicetree/bindings/display/panel/
-
-INTEL DRM DRIVERS (excluding Poulsbo, Moorestown and derivative chipsets)
-M: Daniel Vetter <daniel.vetter@intel.com>
-M: Jani Nikula <jani.nikula@linux.intel.com>
-L: intel-gfx@lists.freedesktop.org
-W: https://01.org/linuxgraphics/
-B: https://01.org/linuxgraphics/documentation/how-report-bugs
-C: irc://chat.freenode.net/intel-gfx
-Q: http://patchwork.freedesktop.org/project/intel-gfx/
-T: git git://anongit.freedesktop.org/drm-intel
-S: Supported
-F: drivers/gpu/drm/i915/
-F: include/drm/i915*
-F: include/uapi/drm/i915_drm.h
-F: Documentation/gpu/i915.rst
-
-INTEL GVT-g DRIVERS (Intel GPU Virtualization)
-M: Zhenyu Wang <zhenyuw@linux.intel.com>
-M: Zhi Wang <zhi.a.wang@intel.com>
-L: intel-gvt-dev@lists.freedesktop.org
-L: intel-gfx@lists.freedesktop.org
-W: https://01.org/igvt-g
-T: git https://github.com/01org/gvt-linux.git
-S: Supported
-F: drivers/gpu/drm/i915/gvt/
-
-DRM DRIVERS FOR ATMEL HLCDC
-M: Boris Brezillon <boris.brezillon@free-electrons.com>
-L: dri-devel@lists.freedesktop.org
-S: Supported
-F: drivers/gpu/drm/atmel-hlcdc/
-F: Documentation/devicetree/bindings/drm/atmel/
-T: git git://anongit.freedesktop.org/drm/drm-misc
-
DRM DRIVERS FOR ALLWINNER A10
M: Maxime Ripard <maxime.ripard@free-electrons.com>
L: dri-devel@lists.freedesktop.org
@@ -4414,6 +4445,22 @@
F: Documentation/gpu/meson.rst
T: git git://anongit.freedesktop.org/drm/drm-misc
+DRM DRIVERS FOR ATMEL HLCDC
+M: Boris Brezillon <boris.brezillon@free-electrons.com>
+L: dri-devel@lists.freedesktop.org
+S: Supported
+F: drivers/gpu/drm/atmel-hlcdc/
+F: Documentation/devicetree/bindings/drm/atmel/
+T: git git://anongit.freedesktop.org/drm/drm-misc
+
+DRM DRIVERS FOR BRIDGE CHIPS
+M: Archit Taneja <architt@codeaurora.org>
+M: Andrzej Hajda <a.hajda@samsung.com>
+R: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
+S: Maintained
+T: git git://anongit.freedesktop.org/drm/drm-misc
+F: drivers/gpu/drm/bridge/
+
DRM DRIVERS FOR EXYNOS
M: Inki Dae <inki.dae@samsung.com>
M: Joonyoung Shim <jy0922.shim@samsung.com>
@@ -4462,11 +4509,6 @@
F: drivers/gpu/drm/hisilicon/
F: Documentation/devicetree/bindings/display/hisilicon/
-DRM DRIVER FOR INTEL I810 VIDEO CARDS
-S: Orphan / Obsolete
-F: drivers/gpu/drm/i810/
-F: include/uapi/drm/i810_drm.h
-
DRM DRIVERS FOR MEDIATEK
M: CK Hu <ck.hu@mediatek.com>
M: Philipp Zabel <p.zabel@pengutronix.de>
@@ -4475,32 +4517,6 @@
F: drivers/gpu/drm/mediatek/
F: Documentation/devicetree/bindings/display/mediatek/
-DRM DRIVER FOR MI0283QT
-M: Noralf Trønnes <noralf@tronnes.org>
-S: Maintained
-F: drivers/gpu/drm/tinydrm/mi0283qt.c
-F: Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt
-
-DRM DRIVER FOR MSM ADRENO GPU
-M: Rob Clark <robdclark@gmail.com>
-L: linux-arm-msm@vger.kernel.org
-L: dri-devel@lists.freedesktop.org
-L: freedreno@lists.freedesktop.org
-T: git git://people.freedesktop.org/~robclark/linux
-S: Maintained
-F: drivers/gpu/drm/msm/
-F: include/uapi/drm/msm_drm.h
-F: Documentation/devicetree/bindings/display/msm/
-
-DRM DRIVER FOR NVIDIA GEFORCE/QUADRO GPUS
-M: Ben Skeggs <bskeggs@redhat.com>
-L: dri-devel@lists.freedesktop.org
-L: nouveau@lists.freedesktop.org
-T: git git://github.com/skeggsb/linux
-S: Supported
-F: drivers/gpu/drm/nouveau/
-F: include/uapi/drm/nouveau_drm.h
-
DRM DRIVERS FOR NVIDIA TEGRA
M: Thierry Reding <thierry.reding@gmail.com>
L: dri-devel@lists.freedesktop.org
@@ -4513,21 +4529,6 @@
F: include/uapi/drm/tegra_drm.h
F: Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
-DRM DRIVER FOR MATROX G200/G400 GRAPHICS CARDS
-S: Orphan / Obsolete
-F: drivers/gpu/drm/mga/
-F: include/uapi/drm/mga_drm.h
-
-DRM DRIVER FOR MGA G200 SERVER GRAPHICS CHIPS
-M: Dave Airlie <airlied@redhat.com>
-S: Odd Fixes
-F: drivers/gpu/drm/mgag200/
-
-DRM DRIVER FOR RAGE 128 VIDEO CARDS
-S: Orphan / Obsolete
-F: drivers/gpu/drm/r128/
-F: include/uapi/drm/r128_drm.h
-
DRM DRIVERS FOR RENESAS
M: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
L: dri-devel@lists.freedesktop.org
@@ -4540,15 +4541,6 @@
F: Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt
F: Documentation/devicetree/bindings/display/renesas,du.txt
-DRM DRIVER FOR QXL VIRTUAL GPU
-M: Dave Airlie <airlied@redhat.com>
-M: Gerd Hoffmann <kraxel@redhat.com>
-L: virtualization@lists.linux-foundation.org
-T: git git://anongit.freedesktop.org/drm/drm-misc
-S: Maintained
-F: drivers/gpu/drm/qxl/
-F: include/uapi/drm/qxl_drm.h
-
DRM DRIVERS FOR ROCKCHIP
M: Mark Yao <mark.yao@rock-chips.com>
L: dri-devel@lists.freedesktop.org
@@ -4557,16 +4549,6 @@
F: Documentation/devicetree/bindings/display/rockchip/
T: git git://anongit.freedesktop.org/drm/drm-misc
-DRM DRIVER FOR SAVAGE VIDEO CARDS
-S: Orphan / Obsolete
-F: drivers/gpu/drm/savage/
-F: include/uapi/drm/savage_drm.h
-
-DRM DRIVER FOR SIS VIDEO CARDS
-S: Orphan / Obsolete
-F: drivers/gpu/drm/sis/
-F: include/uapi/drm/sis_drm.h
-
DRM DRIVERS FOR STI
M: Benjamin Gaignard <benjamin.gaignard@linaro.org>
M: Vincent Abriou <vincent.abriou@st.com>
@@ -4587,14 +4569,29 @@
F: drivers/gpu/drm/stm
F: Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
-DRM DRIVER FOR TDFX VIDEO CARDS
-S: Orphan / Obsolete
-F: drivers/gpu/drm/tdfx/
+DRM DRIVERS FOR TI LCDC
+M: Jyri Sarha <jsarha@ti.com>
+R: Tomi Valkeinen <tomi.valkeinen@ti.com>
+L: dri-devel@lists.freedesktop.org
+S: Maintained
+F: drivers/gpu/drm/tilcdc/
+F: Documentation/devicetree/bindings/display/tilcdc/
-DRM DRIVER FOR USB DISPLAYLINK VIDEO ADAPTERS
-M: Dave Airlie <airlied@redhat.com>
-S: Odd Fixes
-F: drivers/gpu/drm/udl/
+DRM DRIVERS FOR TI OMAP
+M: Tomi Valkeinen <tomi.valkeinen@ti.com>
+L: dri-devel@lists.freedesktop.org
+S: Maintained
+F: drivers/gpu/drm/omapdrm/
+F: Documentation/devicetree/bindings/display/ti/
+
+DRM DRIVERS FOR VC4
+M: Eric Anholt <eric@anholt.net>
+T: git git://github.com/anholt/linux
+S: Supported
+F: drivers/gpu/drm/vc4/
+F: include/uapi/drm/vc4_drm.h
+F: Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
+T: git git://anongit.freedesktop.org/drm/drm-misc
DRM DRIVERS FOR VIVANTE GPU IP
M: Lucas Stach <l.stach@pengutronix.de>
@@ -4607,41 +4604,6 @@
F: include/uapi/drm/etnaviv_drm.h
F: Documentation/devicetree/bindings/display/etnaviv/
-DRM DRIVER FOR VMWARE VIRTUAL GPU
-M: "VMware Graphics" <linux-graphics-maintainer@vmware.com>
-M: Sinclair Yeh <syeh@vmware.com>
-M: Thomas Hellstrom <thellstrom@vmware.com>
-L: dri-devel@lists.freedesktop.org
-T: git git://people.freedesktop.org/~syeh/repos_linux
-T: git git://people.freedesktop.org/~thomash/linux
-S: Supported
-F: drivers/gpu/drm/vmwgfx/
-F: include/uapi/drm/vmwgfx_drm.h
-
-DRM DRIVERS FOR VC4
-M: Eric Anholt <eric@anholt.net>
-T: git git://github.com/anholt/linux
-S: Supported
-F: drivers/gpu/drm/vc4/
-F: include/uapi/drm/vc4_drm.h
-F: Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
-T: git git://anongit.freedesktop.org/drm/drm-misc
-
-DRM DRIVERS FOR TI OMAP
-M: Tomi Valkeinen <tomi.valkeinen@ti.com>
-L: dri-devel@lists.freedesktop.org
-S: Maintained
-F: drivers/gpu/drm/omapdrm/
-F: Documentation/devicetree/bindings/display/ti/
-
-DRM DRIVERS FOR TI LCDC
-M: Jyri Sarha <jsarha@ti.com>
-R: Tomi Valkeinen <tomi.valkeinen@ti.com>
-L: dri-devel@lists.freedesktop.org
-S: Maintained
-F: drivers/gpu/drm/tilcdc/
-F: Documentation/devicetree/bindings/display/tilcdc/
-
DRM DRIVERS FOR ZTE ZX
M: Shawn Guo <shawnguo@kernel.org>
L: dri-devel@lists.freedesktop.org
@@ -4650,6 +4612,16 @@
F: Documentation/devicetree/bindings/display/zte,vou.txt
T: git git://anongit.freedesktop.org/drm/drm-misc
+DRM PANEL DRIVERS
+M: Thierry Reding <thierry.reding@gmail.com>
+L: dri-devel@lists.freedesktop.org
+T: git git://anongit.freedesktop.org/tegra/linux.git
+S: Maintained
+F: drivers/gpu/drm/drm_panel.c
+F: drivers/gpu/drm/panel/
+F: include/drm/drm_panel.h
+F: Documentation/devicetree/bindings/display/panel/
+
DSBR100 USB FM RADIO DRIVER
M: Alexey Klimov <klimov.linux@gmail.com>
L: linux-media@vger.kernel.org
@@ -4781,13 +4753,6 @@
F: drivers/media/usb/dvb-usb-v2/dvb_usb*
F: drivers/media/usb/dvb-usb-v2/usb_urb.c
-DONGWOON DW9714 LENS VOICE COIL DRIVER
-M: Sakari Ailus <sakari.ailus@linux.intel.com>
-L: linux-media@vger.kernel.org
-T: git git://linuxtv.org/media_tree.git
-S: Maintained
-F: drivers/media/i2c/dw9714.c
-
DYNAMIC DEBUG
M: Jason Baron <jbaron@akamai.com>
S: Maintained
@@ -4843,19 +4808,6 @@
F: Documentation/filesystems/ecryptfs.txt
F: fs/ecryptfs/
-EDAC-CORE
-M: Borislav Petkov <bp@alien8.de>
-M: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-M: Mauro Carvalho Chehab <mchehab@kernel.org>
-L: linux-edac@vger.kernel.org
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp.git for-next
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac.git linux_next
-S: Supported
-F: Documentation/admin-guide/ras.rst
-F: Documentation/driver-api/edac.rst
-F: drivers/edac/
-F: include/linux/edac.h
-
EDAC-AMD64
M: Borislav Petkov <bp@alien8.de>
L: linux-edac@vger.kernel.org
@@ -4877,6 +4829,19 @@
F: drivers/edac/octeon_edac*
F: drivers/edac/thunderx_edac*
+EDAC-CORE
+M: Borislav Petkov <bp@alien8.de>
+M: Mauro Carvalho Chehab <mchehab@s-opensource.com>
+M: Mauro Carvalho Chehab <mchehab@kernel.org>
+L: linux-edac@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp.git for-next
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac.git linux_next
+S: Supported
+F: Documentation/admin-guide/ras.rst
+F: Documentation/driver-api/edac.rst
+F: drivers/edac/
+F: include/linux/edac.h
+
EDAC-E752X
M: Mark Gross <mark.gross@intel.com>
L: linux-edac@vger.kernel.org
@@ -4901,12 +4866,6 @@
S: Maintained
F: drivers/edac/ghes_edac.c
-EDAC-I82443BXGX
-M: Tim Small <tim@buttersideup.com>
-L: linux-edac@vger.kernel.org
-S: Maintained
-F: drivers/edac/i82443bxgx_edac.c
-
EDAC-I3000
L: linux-edac@vger.kernel.org
S: Orphan
@@ -4938,6 +4897,12 @@
S: Maintained
F: drivers/edac/i7core_edac.c
+EDAC-I82443BXGX
+M: Tim Small <tim@buttersideup.com>
+L: linux-edac@vger.kernel.org
+S: Maintained
+F: drivers/edac/i82443bxgx_edac.c
+
EDAC-I82975X
M: Ranganathan Desikan <ravi@jetztechnologies.com>
M: "Arvind R." <arvino55@gmail.com>
@@ -4957,18 +4922,18 @@
S: Maintained
F: drivers/edac/mpc85xx_edac.[ch]
-EDAC-PND2
-M: Tony Luck <tony.luck@intel.com>
-L: linux-edac@vger.kernel.org
-S: Maintained
-F: drivers/edac/pnd2_edac.[ch]
-
EDAC-PASEMI
M: Egor Martovetsky <egor@pasemi.com>
L: linux-edac@vger.kernel.org
S: Maintained
F: drivers/edac/pasemi_edac.c
+EDAC-PND2
+M: Tony Luck <tony.luck@intel.com>
+L: linux-edac@vger.kernel.org
+S: Maintained
+F: drivers/edac/pnd2_edac.[ch]
+
EDAC-R82600
M: Tim Small <tim@buttersideup.com>
L: linux-edac@vger.kernel.org
@@ -4988,13 +4953,6 @@
S: Maintained
F: drivers/edac/skx_edac.c
-EDAC-XGENE
-APPLIED MICRO (APM) X-GENE SOC EDAC
-M: Loc Ho <lho@apm.com>
-S: Supported
-F: drivers/edac/xgene_edac.c
-F: Documentation/devicetree/bindings/edac/apm-xgene-edac.txt
-
EDIROL UA-101/UA-1000 DRIVER
M: Clemens Ladisch <clemens@ladisch.de>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
@@ -5002,21 +4960,12 @@
S: Maintained
F: sound/usb/misc/ua101.c
-EXTENSIBLE FIRMWARE INTERFACE (EFI)
-M: Matt Fleming <matt@codeblueprint.co.uk>
-M: Ard Biesheuvel <ard.biesheuvel@linaro.org>
+EFI TEST DRIVER
L: linux-efi@vger.kernel.org
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi.git
+M: Ivan Hu <ivan.hu@canonical.com>
+M: Matt Fleming <matt@codeblueprint.co.uk>
S: Maintained
-F: Documentation/efi-stub.txt
-F: arch/*/kernel/efi.c
-F: arch/x86/boot/compressed/eboot.[ch]
-F: arch/*/include/asm/efi.h
-F: arch/x86/platform/efi/
-F: drivers/firmware/efi/
-F: include/linux/efi*.h
-F: arch/arm/boot/compressed/efi-header.S
-F: arch/arm64/kernel/efi-entry.S
+F: drivers/firmware/efi/test/
EFI VARIABLE FILESYSTEM
M: Matthew Garrett <matthew.garrett@nebula.com>
@@ -5033,13 +4982,6 @@
S: Maintained
F: drivers/video/fbdev/efifb.c
-EFI TEST DRIVER
-L: linux-efi@vger.kernel.org
-M: Ivan Hu <ivan.hu@canonical.com>
-M: Matt Fleming <matt@codeblueprint.co.uk>
-S: Maintained
-F: drivers/firmware/efi/test/
-
EFS FILESYSTEM
W: http://aeschi.ch.eu.org/efs/
S: Orphan
@@ -5068,6 +5010,34 @@
L: linux-embedded@vger.kernel.org
S: Maintained
+Emulex 10Gbps iSCSI - OneConnect DRIVER
+M: Subbu Seetharaman <subbu.seetharaman@broadcom.com>
+M: Ketan Mukadam <ketan.mukadam@broadcom.com>
+M: Jitendra Bhivare <jitendra.bhivare@broadcom.com>
+L: linux-scsi@vger.kernel.org
+W: http://www.broadcom.com
+S: Supported
+F: drivers/scsi/be2iscsi/
+
+Emulex 10Gbps NIC BE2, BE3-R, Lancer, Skyhawk-R DRIVER (be2net)
+M: Sathya Perla <sathya.perla@broadcom.com>
+M: Ajit Khaparde <ajit.khaparde@broadcom.com>
+M: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
+M: Somnath Kotur <somnath.kotur@broadcom.com>
+L: netdev@vger.kernel.org
+W: http://www.emulex.com
+S: Supported
+F: drivers/net/ethernet/emulex/benet/
+
+EMULEX ONECONNECT ROCE DRIVER
+M: Selvin Xavier <selvin.xavier@broadcom.com>
+M: Devesh Sharma <devesh.sharma@broadcom.com>
+L: linux-rdma@vger.kernel.org
+W: http://www.broadcom.com
+S: Odd Fixes
+F: drivers/infiniband/hw/ocrdma/
+F: include/uapi/rdma/ocrdma-abi.h
+
EMULEX/BROADCOM LPFC FC/FCOE SCSI DRIVER
M: James Smart <james.smart@broadcom.com>
M: Dick Kennedy <dick.kennedy@broadcom.com>
@@ -5120,12 +5090,20 @@
M: Florian Fainelli <f.fainelli@gmail.com>
L: netdev@vger.kernel.org
S: Maintained
-F: include/linux/phy.h
-F: include/linux/phy_fixed.h
-F: drivers/net/phy/
+F: Documentation/ABI/testing/sysfs-bus-mdio
+F: Documentation/devicetree/bindings/net/mdio*
F: Documentation/networking/phy.txt
+F: drivers/net/phy/
F: drivers/of/of_mdio.c
F: drivers/of/of_net.c
+F: include/linux/*mdio*.h
+F: include/linux/of_net.h
+F: include/linux/phy.h
+F: include/linux/phy_fixed.h
+F: include/linux/platform_data/mdio-gpio.h
+F: include/trace/events/mdio.h
+F: include/uapi/linux/mdio.h
+F: include/uapi/linux/mii.h
EXT2 FILE SYSTEM
M: Jan Kara <jack@suse.com>
@@ -5153,6 +5131,22 @@
S: Supported
F: security/integrity/evm/
+EXTENSIBLE FIRMWARE INTERFACE (EFI)
+M: Matt Fleming <matt@codeblueprint.co.uk>
+M: Ard Biesheuvel <ard.biesheuvel@linaro.org>
+L: linux-efi@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi.git
+S: Maintained
+F: Documentation/efi-stub.txt
+F: arch/*/kernel/efi.c
+F: arch/x86/boot/compressed/eboot.[ch]
+F: arch/*/include/asm/efi.h
+F: arch/x86/platform/efi/
+F: drivers/firmware/efi/
+F: include/linux/efi*.h
+F: arch/arm/boot/compressed/efi-header.S
+F: arch/arm64/kernel/efi-entry.S
+
EXTERNAL CONNECTOR SUBSYSTEM (EXTCON)
M: MyungJoo Ham <myungjoo.ham@samsung.com>
M: Chanwoo Choi <cw00.choi@samsung.com>
@@ -5183,6 +5177,19 @@
F: arch/arc/plat-eznps
F: arch/arc/boot/dts/eznps.dts
+F2FS FILE SYSTEM
+M: Jaegeuk Kim <jaegeuk@kernel.org>
+M: Chao Yu <yuchao0@huawei.com>
+L: linux-f2fs-devel@lists.sourceforge.net
+W: https://f2fs.wiki.kernel.org/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs.git
+S: Maintained
+F: Documentation/filesystems/f2fs.txt
+F: Documentation/ABI/testing/sysfs-fs-f2fs
+F: fs/f2fs/
+F: include/linux/f2fs_fs.h
+F: include/trace/events/f2fs.h
+
F71805F HARDWARE MONITORING DRIVER
M: Jean Delvare <jdelvare@suse.com>
L: linux-hwmon@vger.kernel.org
@@ -5190,23 +5197,6 @@
F: Documentation/hwmon/f71805f
F: drivers/hwmon/f71805f.c
-FC0011 TUNER DRIVER
-M: Michael Buesch <m@bues.ch>
-L: linux-media@vger.kernel.org
-S: Maintained
-F: drivers/media/tuners/fc0011.h
-F: drivers/media/tuners/fc0011.c
-
-FC2580 MEDIA DRIVER
-M: Antti Palosaari <crope@iki.fi>
-L: linux-media@vger.kernel.org
-W: https://linuxtv.org
-W: http://palosaari.fi/linux/
-Q: http://patchwork.linuxtv.org/project/linux-media/list/
-T: git git://linuxtv.org/anttip/media_tree.git
-S: Maintained
-F: drivers/media/tuners/fc2580*
-
FANOTIFY
M: Eric Paris <eparis@redhat.com>
S: Maintained
@@ -5231,6 +5221,23 @@
S: Maintained
F: drivers/staging/fbtft/
+FC0011 TUNER DRIVER
+M: Michael Buesch <m@bues.ch>
+L: linux-media@vger.kernel.org
+S: Maintained
+F: drivers/media/tuners/fc0011.h
+F: drivers/media/tuners/fc0011.c
+
+FC2580 MEDIA DRIVER
+M: Antti Palosaari <crope@iki.fi>
+L: linux-media@vger.kernel.org
+W: https://linuxtv.org
+W: http://palosaari.fi/linux/
+Q: http://patchwork.linuxtv.org/project/linux-media/list/
+T: git git://linuxtv.org/anttip/media_tree.git
+S: Maintained
+F: drivers/media/tuners/fc2580*
+
FCOE SUBSYSTEM (libfc, libfcoe, fcoe)
M: Johannes Thumshirn <jth@kernel.org>
L: fcoe-devel@open-fcoe.org
@@ -5390,6 +5397,14 @@
S: Maintained
F: drivers/dma/fsldma.*
+FREESCALE eTSEC ETHERNET DRIVER (GIANFAR)
+M: Claudiu Manoil <claudiu.manoil@freescale.com>
+L: netdev@vger.kernel.org
+S: Maintained
+F: drivers/net/ethernet/freescale/gianfar*
+X: drivers/net/ethernet/freescale/gianfar_ptp.c
+F: Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
+
FREESCALE GPMI NAND DRIVER
M: Han Xu <han.xu@nxp.com>
L: linux-mtd@lists.infradead.org
@@ -5403,29 +5418,6 @@
S: Maintained
F: drivers/i2c/busses/i2c-cpm.c
-FREESCALE IMX / MXC FRAMEBUFFER DRIVER
-M: Sascha Hauer <kernel@pengutronix.de>
-L: linux-fbdev@vger.kernel.org
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-F: include/linux/platform_data/video-imxfb.h
-F: drivers/video/fbdev/imxfb.c
-
-FREESCALE QUAD SPI DRIVER
-M: Han Xu <han.xu@nxp.com>
-L: linux-mtd@lists.infradead.org
-S: Maintained
-F: drivers/mtd/spi-nor/fsl-quadspi.c
-
-FREESCALE SOC FS_ENET DRIVER
-M: Pantelis Antoniou <pantelis.antoniou@gmail.com>
-M: Vitaly Bordug <vbordug@ru.mvista.com>
-L: linuxppc-dev@lists.ozlabs.org
-L: netdev@vger.kernel.org
-S: Maintained
-F: drivers/net/ethernet/freescale/fs_enet/
-F: include/linux/fs_enet_pd.h
-
FREESCALE IMX / MXC FEC DRIVER
M: Fugang Duan <fugang.duan@nxp.com>
L: netdev@vger.kernel.org
@@ -5435,12 +5427,13 @@
F: drivers/net/ethernet/freescale/fec.h
F: Documentation/devicetree/bindings/net/fsl-fec.txt
-FREESCALE QORIQ DPAA FMAN DRIVER
-M: Madalin Bucur <madalin.bucur@nxp.com>
-L: netdev@vger.kernel.org
+FREESCALE IMX / MXC FRAMEBUFFER DRIVER
+M: Sascha Hauer <kernel@pengutronix.de>
+L: linux-fbdev@vger.kernel.org
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
-F: drivers/net/ethernet/freescale/fman
-F: Documentation/devicetree/bindings/powerpc/fsl/fman.txt
+F: include/linux/platform_data/video-imxfb.h
+F: drivers/video/fbdev/imxfb.c
FREESCALE QORIQ DPAA ETHERNET DRIVER
M: Madalin Bucur <madalin.bucur@nxp.com>
@@ -5448,14 +5441,18 @@
S: Maintained
F: drivers/net/ethernet/freescale/dpaa
-FREESCALE SOC DRIVERS
-M: Li Yang <leoyang.li@nxp.com>
-L: linuxppc-dev@lists.ozlabs.org
-L: linux-arm-kernel@lists.infradead.org
+FREESCALE QORIQ DPAA FMAN DRIVER
+M: Madalin Bucur <madalin.bucur@nxp.com>
+L: netdev@vger.kernel.org
S: Maintained
-F: Documentation/devicetree/bindings/soc/fsl/
-F: drivers/soc/fsl/
-F: include/linux/fsl/
+F: drivers/net/ethernet/freescale/fman
+F: Documentation/devicetree/bindings/powerpc/fsl/fman.txt
+
+FREESCALE QUAD SPI DRIVER
+M: Han Xu <han.xu@nxp.com>
+L: linux-mtd@lists.infradead.org
+S: Maintained
+F: drivers/mtd/spi-nor/fsl-quadspi.c
FREESCALE QUICC ENGINE LIBRARY
M: Qiang Zhao <qiang.zhao@nxp.com>
@@ -5465,13 +5462,6 @@
F: include/soc/fsl/*qe*.h
F: include/soc/fsl/*ucc*.h
-FREESCALE USB PERIPHERAL DRIVERS
-M: Li Yang <leoyang.li@nxp.com>
-L: linux-usb@vger.kernel.org
-L: linuxppc-dev@lists.ozlabs.org
-S: Maintained
-F: drivers/usb/gadget/udc/fsl*
-
FREESCALE QUICC ENGINE UCC ETHERNET DRIVER
M: Li Yang <leoyang.li@nxp.com>
L: netdev@vger.kernel.org
@@ -5479,14 +5469,6 @@
S: Maintained
F: drivers/net/ethernet/freescale/ucc_geth*
-FREESCALE eTSEC ETHERNET DRIVER (GIANFAR)
-M: Claudiu Manoil <claudiu.manoil@freescale.com>
-L: netdev@vger.kernel.org
-S: Maintained
-F: drivers/net/ethernet/freescale/gianfar*
-X: drivers/net/ethernet/freescale/gianfar_ptp.c
-F: Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
-
FREESCALE QUICC ENGINE UCC HDLC DRIVER
M: Zhao Qiang <qiang.zhao@nxp.com>
L: netdev@vger.kernel.org
@@ -5500,6 +5482,24 @@
S: Maintained
F: drivers/tty/serial/ucc_uart.c
+FREESCALE SOC DRIVERS
+M: Li Yang <leoyang.li@nxp.com>
+L: linuxppc-dev@lists.ozlabs.org
+L: linux-arm-kernel@lists.infradead.org
+S: Maintained
+F: Documentation/devicetree/bindings/soc/fsl/
+F: drivers/soc/fsl/
+F: include/linux/fsl/
+
+FREESCALE SOC FS_ENET DRIVER
+M: Pantelis Antoniou <pantelis.antoniou@gmail.com>
+M: Vitaly Bordug <vbordug@ru.mvista.com>
+L: linuxppc-dev@lists.ozlabs.org
+L: netdev@vger.kernel.org
+S: Maintained
+F: drivers/net/ethernet/freescale/fs_enet/
+F: include/linux/fs_enet_pd.h
+
FREESCALE SOC SOUND DRIVERS
M: Timur Tabi <timur@tabi.org>
M: Nicolin Chen <nicoleotsuka@gmail.com>
@@ -5512,6 +5512,13 @@
F: sound/soc/fsl/imx*
F: sound/soc/fsl/mpc8610_hpcd.c
+FREESCALE USB PERIPHERAL DRIVERS
+M: Li Yang <leoyang.li@nxp.com>
+L: linux-usb@vger.kernel.org
+L: linuxppc-dev@lists.ozlabs.org
+S: Maintained
+F: drivers/usb/gadget/udc/fsl*
+
FREEVXFS FILESYSTEM
M: Christoph Hellwig <hch@infradead.org>
W: ftp://ftp.openlinux.org/pub/people/hch/vxfs
@@ -5552,19 +5559,6 @@
F: fs/crypto/
F: include/linux/fscrypt*.h
-F2FS FILE SYSTEM
-M: Jaegeuk Kim <jaegeuk@kernel.org>
-M: Chao Yu <yuchao0@huawei.com>
-L: linux-f2fs-devel@lists.sourceforge.net
-W: https://f2fs.wiki.kernel.org/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs.git
-S: Maintained
-F: Documentation/filesystems/f2fs.txt
-F: Documentation/ABI/testing/sysfs-fs-f2fs
-F: fs/f2fs/
-F: include/linux/f2fs_fs.h
-F: include/trace/events/f2fs.h
-
FUJITSU FR-V (FRV) PORT
S: Orphan
F: arch/frv/
@@ -5638,6 +5632,12 @@
F: kernel/gcov/
F: Documentation/dev-tools/gcov.rst
+GDB KERNEL DEBUGGING HELPER SCRIPTS
+M: Jan Kiszka <jan.kiszka@siemens.com>
+M: Kieran Bingham <kieran@bingham.xyz>
+S: Supported
+F: scripts/gdb/
+
GDT SCSI DISK ARRAY CONTROLLER DRIVER
M: Achim Leubner <achim_leubner@adaptec.com>
L: linux-scsi@vger.kernel.org
@@ -5645,12 +5645,6 @@
S: Supported
F: drivers/scsi/gdt*
-GDB KERNEL DEBUGGING HELPER SCRIPTS
-M: Jan Kiszka <jan.kiszka@siemens.com>
-M: Kieran Bingham <kieran@bingham.xyz>
-S: Supported
-F: scripts/gdb/
-
GEMTEK FM RADIO RECEIVER DRIVER
M: Hans Verkuil <hverkuil@xs4all.nl>
L: linux-media@vger.kernel.org
@@ -5717,17 +5711,17 @@
S: Supported
F: drivers/uio/uio_pci_generic.c
-GET_MAINTAINER SCRIPT
-M: Joe Perches <joe@perches.com>
-S: Maintained
-F: scripts/get_maintainer.pl
-
GENWQE (IBM Generic Workqueue Card)
M: Frank Haverkamp <haver@linux.vnet.ibm.com>
M: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
S: Supported
F: drivers/misc/genwqe/
+GET_MAINTAINER SCRIPT
+M: Joe Perches <joe@perches.com>
+S: Maintained
+F: scripts/get_maintainer.pl
+
GFS2 FILE SYSTEM
M: Steven Whitehouse <swhiteho@redhat.com>
M: Bob Peterson <rpeterso@redhat.com>
@@ -5760,6 +5754,15 @@
S: Maintained
F: drivers/input/touchscreen/goodix.c
+GPIO ACPI SUPPORT
+M: Mika Westerberg <mika.westerberg@linux.intel.com>
+M: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+L: linux-gpio@vger.kernel.org
+L: linux-acpi@vger.kernel.org
+S: Maintained
+F: Documentation/acpi/gpio-properties.txt
+F: drivers/gpio/gpiolib-acpi.c
+
GPIO MOCKUP DRIVER
M: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
L: linux-gpio@vger.kernel.org
@@ -5783,15 +5786,6 @@
F: include/uapi/linux/gpio.h
F: tools/gpio/
-GPIO ACPI SUPPORT
-M: Mika Westerberg <mika.westerberg@linux.intel.com>
-M: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-L: linux-gpio@vger.kernel.org
-L: linux-acpi@vger.kernel.org
-S: Maintained
-F: Documentation/acpi/gpio-properties.txt
-F: drivers/gpio/gpiolib-acpi.c
-
GRE DEMULTIPLEXER DRIVER
M: Dmitry Kozlov <xeb@mail.ru>
L: netdev@vger.kernel.org
@@ -5806,14 +5800,6 @@
S: Maintained
F: drivers/net/ethernet/aeroflex/
-GREYBUS SUBSYSTEM
-M: Johan Hovold <johan@kernel.org>
-M: Alex Elder <elder@kernel.org>
-M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-S: Maintained
-F: drivers/staging/greybus/
-L: greybus-dev@lists.linaro.org (moderated for non-subscribers)
-
GREYBUS AUDIO PROTOCOLS DRIVERS
M: Vaibhav Agarwal <vaibhav.sr@gmail.com>
M: Mark Greer <mgreer@animalcreek.com>
@@ -5831,24 +5817,7 @@
F: drivers/staging/greybus/audio_module.c
F: drivers/staging/greybus/audio_topology.c
-GREYBUS PROTOCOLS DRIVERS
-M: Rui Miguel Silva <rmfrfs@gmail.com>
-S: Maintained
-F: drivers/staging/greybus/sdio.c
-F: drivers/staging/greybus/light.c
-F: drivers/staging/greybus/gpio.c
-F: drivers/staging/greybus/power_supply.c
-F: drivers/staging/greybus/spi.c
-F: drivers/staging/greybus/spilib.c
-
-GREYBUS PROTOCOLS DRIVERS
-M: Bryan O'Donoghue <pure.logic@nexus-software.ie>
-S: Maintained
-F: drivers/staging/greybus/loopback.c
-F: drivers/staging/greybus/timesync.c
-F: drivers/staging/greybus/timesync_platform.c
-
-GREYBUS PROTOCOLS DRIVERS
+GREYBUS FW/HID/SPI PROTOCOLS DRIVERS
M: Viresh Kumar <vireshk@kernel.org>
S: Maintained
F: drivers/staging/greybus/authentication.c
@@ -5865,11 +5834,12 @@
F: drivers/staging/greybus/spilib.c
F: drivers/staging/greybus/spilib.h
-GREYBUS PROTOCOLS DRIVERS
-M: David Lin <dtwlin@gmail.com>
+GREYBUS LOOBACK/TIME PROTOCOLS DRIVERS
+M: Bryan O'Donoghue <pure.logic@nexus-software.ie>
S: Maintained
-F: drivers/staging/greybus/uart.c
-F: drivers/staging/greybus/log.c
+F: drivers/staging/greybus/loopback.c
+F: drivers/staging/greybus/timesync.c
+F: drivers/staging/greybus/timesync_platform.c
GREYBUS PLATFORM DRIVERS
M: Vaibhav Hiremath <hvaibhav.linux@gmail.com>
@@ -5878,6 +5848,30 @@
F: drivers/staging/greybus/arche-apb-ctrl.c
F: drivers/staging/greybus/arche_platform.h
+GREYBUS SDIO/GPIO/SPI PROTOCOLS DRIVERS
+M: Rui Miguel Silva <rmfrfs@gmail.com>
+S: Maintained
+F: drivers/staging/greybus/sdio.c
+F: drivers/staging/greybus/light.c
+F: drivers/staging/greybus/gpio.c
+F: drivers/staging/greybus/power_supply.c
+F: drivers/staging/greybus/spi.c
+F: drivers/staging/greybus/spilib.c
+
+GREYBUS SUBSYSTEM
+M: Johan Hovold <johan@kernel.org>
+M: Alex Elder <elder@kernel.org>
+M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+S: Maintained
+F: drivers/staging/greybus/
+L: greybus-dev@lists.linaro.org (moderated for non-subscribers)
+
+GREYBUS UART PROTOCOLS DRIVERS
+M: David Lin <dtwlin@gmail.com>
+S: Maintained
+F: drivers/staging/greybus/uart.c
+F: drivers/staging/greybus/log.c
+
GS1662 VIDEO SERIALIZER
M: Charles-Antoine Couret <charles-antoine.couret@nexvision.fr>
L: linux-media@vger.kernel.org
@@ -5948,13 +5942,6 @@
S: Maintained
F: block/partitions/efi.*
-STK1160 USB VIDEO CAPTURE DRIVER
-M: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
-L: linux-media@vger.kernel.org
-T: git git://linuxtv.org/media_tree.git
-S: Maintained
-F: drivers/media/usb/stk1160/
-
H8/300 ARCHITECTURE
M: Yoshinori Sato <ysato@users.sourceforge.jp>
L: uclinux-h8-devel@lists.sourceforge.jp (moderated for non-subscribers)
@@ -5966,33 +5953,6 @@
F: drivers/clk/h8300/
F: drivers/irqchip/irq-renesas-h8*.c
-HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER
-M: Frank Seidel <frank@f-seidel.de>
-L: platform-driver-x86@vger.kernel.org
-W: http://www.kernel.org/pub/linux/kernel/people/fseidel/hdaps/
-S: Maintained
-F: drivers/platform/x86/hdaps.c
-
-HDPVR USB VIDEO ENCODER DRIVER
-M: Hans Verkuil <hverkuil@xs4all.nl>
-L: linux-media@vger.kernel.org
-T: git git://linuxtv.org/media_tree.git
-W: https://linuxtv.org
-S: Odd Fixes
-F: drivers/media/usb/hdpvr/
-
-HWPOISON MEMORY FAILURE HANDLING
-M: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
-L: linux-mm@kvack.org
-S: Maintained
-F: mm/memory-failure.c
-F: mm/hwpoison-inject.c
-
-HYPERVISOR VIRTUAL CONSOLE DRIVER
-L: linuxppc-dev@lists.ozlabs.org
-S: Odd Fixes
-F: drivers/tty/hvc/
-
HACKRF MEDIA DRIVER
M: Antti Palosaari <crope@iki.fi>
L: linux-media@vger.kernel.org
@@ -6003,6 +5963,13 @@
S: Maintained
F: drivers/media/usb/hackrf/
+HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER
+M: Frank Seidel <frank@f-seidel.de>
+L: platform-driver-x86@vger.kernel.org
+W: http://www.kernel.org/pub/linux/kernel/people/fseidel/hdaps/
+S: Maintained
+F: drivers/platform/x86/hdaps.c
+
HARDWARE MONITORING
M: Jean Delvare <jdelvare@suse.com>
M: Guenter Roeck <linux@roeck-us.net>
@@ -6041,6 +6008,14 @@
S: Maintained
F: sound/parisc/harmony.*
+HDPVR USB VIDEO ENCODER DRIVER
+M: Hans Verkuil <hverkuil@xs4all.nl>
+L: linux-media@vger.kernel.org
+T: git git://linuxtv.org/media_tree.git
+W: https://linuxtv.org
+S: Odd Fixes
+F: drivers/media/usb/hdpvr/
+
HEWLETT PACKARD ENTERPRISE ILO NMI WATCHDOG DRIVER
M: Jimmy Vance <jimmy.vance@hpe.com>
S: Supported
@@ -6057,23 +6032,6 @@
F: include/linux/cciss*.h
F: include/uapi/linux/cciss*.h
-HEWLETT-PACKARD SMART CISS RAID DRIVER (cciss)
-M: Don Brace <don.brace@microsemi.com>
-L: esc.storagedev@microsemi.com
-L: linux-scsi@vger.kernel.org
-S: Supported
-F: Documentation/blockdev/cciss.txt
-F: drivers/block/cciss*
-F: include/linux/cciss_ioctl.h
-F: include/uapi/linux/cciss_ioctl.h
-
-OPA-VNIC DRIVER
-M: Dennis Dalessandro <dennis.dalessandro@intel.com>
-M: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
-L: linux-rdma@vger.kernel.org
-S: Supported
-F: drivers/infiniband/ulp/opa_vnic
-
HFI1 DRIVER
M: Mike Marciniszyn <mike.marciniszyn@intel.com>
M: Dennis Dalessandro <dennis.dalessandro@intel.com>
@@ -6251,6 +6209,12 @@
S: Maintained
F: net/hsr/
+HT16K33 LED CONTROLLER DRIVER
+M: Robin van der Gracht <robin@protonic.nl>
+S: Maintained
+F: drivers/auxdisplay/ht16k33.c
+F: Documentation/devicetree/bindings/display/ht16k33.txt
+
HTCPEN TOUCHSCREEN DRIVER
M: Pau Oliva Fora <pof@eslack.org>
L: linux-input@vger.kernel.org
@@ -6270,6 +6234,13 @@
S: Supported
F: drivers/media/platform/sti/hva
+HWPOISON MEMORY FAILURE HANDLING
+M: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
+L: linux-mm@kvack.org
+S: Maintained
+F: mm/memory-failure.c
+F: mm/hwpoison-inject.c
+
Hyper-V CORE AND DRIVERS
M: "K. Y. Srinivasan" <kys@microsoft.com>
M: Haiyang Zhang <haiyangz@microsoft.com>
@@ -6292,6 +6263,18 @@
F: tools/hv/
F: Documentation/ABI/stable/sysfs-bus-vmbus
+HYPERVISOR VIRTUAL CONSOLE DRIVER
+L: linuxppc-dev@lists.ozlabs.org
+S: Odd Fixes
+F: drivers/tty/hvc/
+
+I2C ACPI SUPPORT
+M: Mika Westerberg <mika.westerberg@linux.intel.com>
+L: linux-i2c@vger.kernel.org
+L: linux-acpi@vger.kernel.org
+S: Maintained
+F: drivers/i2c/i2c-core-acpi.c
+
I2C MUXES
M: Peter Rosin <peda@axentia.se>
L: linux-i2c@vger.kernel.org
@@ -6314,6 +6297,36 @@
F: drivers/i2c/busses/i2c-parport.c
F: drivers/i2c/busses/i2c-parport-light.c
+I2C SUBSYSTEM
+M: Wolfram Sang <wsa@the-dreams.de>
+L: linux-i2c@vger.kernel.org
+W: https://i2c.wiki.kernel.org/
+Q: https://patchwork.ozlabs.org/project/linux-i2c/list/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git
+S: Maintained
+F: Documentation/devicetree/bindings/i2c/
+F: Documentation/i2c/
+F: drivers/i2c/
+F: drivers/i2c/*/
+F: include/linux/i2c.h
+F: include/linux/i2c-*.h
+F: include/uapi/linux/i2c.h
+F: include/uapi/linux/i2c-*.h
+
+I2C-TAOS-EVM DRIVER
+M: Jean Delvare <jdelvare@suse.com>
+L: linux-i2c@vger.kernel.org
+S: Maintained
+F: Documentation/i2c/busses/i2c-taos-evm
+F: drivers/i2c/busses/i2c-taos-evm.c
+
+I2C-TINY-USB DRIVER
+M: Till Harbaum <till@harbaum.org>
+L: linux-i2c@vger.kernel.org
+W: http://www.harbaum.org/till/i2c_tiny_usb
+S: Maintained
+F: drivers/i2c/busses/i2c-tiny-usb.c
+
I2C/SMBUS CONTROLLER DRIVERS FOR PC
M: Jean Delvare <jdelvare@suse.com>
L: linux-i2c@vger.kernel.org
@@ -6361,42 +6374,6 @@
S: Maintained
F: drivers/i2c/i2c-stub.c
-I2C SUBSYSTEM
-M: Wolfram Sang <wsa@the-dreams.de>
-L: linux-i2c@vger.kernel.org
-W: https://i2c.wiki.kernel.org/
-Q: https://patchwork.ozlabs.org/project/linux-i2c/list/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git
-S: Maintained
-F: Documentation/devicetree/bindings/i2c/
-F: Documentation/i2c/
-F: drivers/i2c/
-F: drivers/i2c/*/
-F: include/linux/i2c.h
-F: include/linux/i2c-*.h
-F: include/uapi/linux/i2c.h
-F: include/uapi/linux/i2c-*.h
-
-I2C ACPI SUPPORT
-M: Mika Westerberg <mika.westerberg@linux.intel.com>
-L: linux-i2c@vger.kernel.org
-L: linux-acpi@vger.kernel.org
-S: Maintained
-
-I2C-TAOS-EVM DRIVER
-M: Jean Delvare <jdelvare@suse.com>
-L: linux-i2c@vger.kernel.org
-S: Maintained
-F: Documentation/i2c/busses/i2c-taos-evm
-F: drivers/i2c/busses/i2c-taos-evm.c
-
-I2C-TINY-USB DRIVER
-M: Till Harbaum <till@harbaum.org>
-L: linux-i2c@vger.kernel.org
-W: http://www.harbaum.org/till/i2c_tiny_usb
-S: Maintained
-F: drivers/i2c/busses/i2c-tiny-usb.c
-
i386 BOOT CODE
M: "H. Peter Anvin" <hpa@zytor.com>
S: Maintained
@@ -6415,17 +6392,15 @@
S: Maintained
F: arch/ia64/
-IBM Power VMX Cryptographic instructions
-M: Leonidas S. Barbosa <leosilva@linux.vnet.ibm.com>
-M: Paulo Flabiano Smorigo <pfsmorigo@linux.vnet.ibm.com>
-L: linux-crypto@vger.kernel.org
+IBM Power 842 compression accelerator
+M: Haren Myneni <haren@us.ibm.com>
S: Supported
-F: drivers/crypto/vmx/Makefile
-F: drivers/crypto/vmx/Kconfig
-F: drivers/crypto/vmx/vmx.c
-F: drivers/crypto/vmx/aes*
-F: drivers/crypto/vmx/ghash*
-F: drivers/crypto/vmx/ppc-xlate.pl
+F: drivers/crypto/nx/Makefile
+F: drivers/crypto/nx/Kconfig
+F: drivers/crypto/nx/nx-842*
+F: include/linux/sw842.h
+F: crypto/842.c
+F: lib/842/
IBM Power in-Nest Crypto Acceleration
M: Leonidas S. Barbosa <leosilva@linux.vnet.ibm.com>
@@ -6440,27 +6415,11 @@
F: drivers/crypto/nx/nx_csbcpb.h
F: drivers/crypto/nx/nx_debugfs.h
-IBM Power 842 compression accelerator
-M: Haren Myneni <haren@us.ibm.com>
-S: Supported
-F: drivers/crypto/nx/Makefile
-F: drivers/crypto/nx/Kconfig
-F: drivers/crypto/nx/nx-842*
-F: include/linux/sw842.h
-F: crypto/842.c
-F: lib/842/
-
IBM Power Linux RAID adapter
M: Brian King <brking@us.ibm.com>
S: Supported
F: drivers/scsi/ipr.*
-IBM Power Virtual Ethernet Device Driver
-M: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
-L: netdev@vger.kernel.org
-S: Supported
-F: drivers/net/ethernet/ibm/ibmveth.*
-
IBM Power SRIOV Virtual NIC Device Driver
M: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
M: John Allen <jallen@linux.vnet.ibm.com>
@@ -6468,6 +6427,18 @@
S: Supported
F: drivers/net/ethernet/ibm/ibmvnic.*
+IBM Power Virtual Ethernet Device Driver
+M: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
+L: netdev@vger.kernel.org
+S: Supported
+F: drivers/net/ethernet/ibm/ibmveth.*
+
+IBM Power Virtual FC Device Drivers
+M: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
+L: linux-scsi@vger.kernel.org
+S: Supported
+F: drivers/scsi/ibmvscsi/ibmvfc*
+
IBM Power Virtual SCSI Device Drivers
M: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
L: linux-scsi@vger.kernel.org
@@ -6483,11 +6454,17 @@
S: Supported
F: drivers/scsi/ibmvscsi_tgt/
-IBM Power Virtual FC Device Drivers
-M: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
-L: linux-scsi@vger.kernel.org
+IBM Power VMX Cryptographic instructions
+M: Leonidas S. Barbosa <leosilva@linux.vnet.ibm.com>
+M: Paulo Flabiano Smorigo <pfsmorigo@linux.vnet.ibm.com>
+L: linux-crypto@vger.kernel.org
S: Supported
-F: drivers/scsi/ibmvscsi/ibmvfc*
+F: drivers/crypto/vmx/Makefile
+F: drivers/crypto/vmx/Kconfig
+F: drivers/crypto/vmx/vmx.c
+F: drivers/crypto/vmx/aes*
+F: drivers/crypto/vmx/ghash*
+F: drivers/crypto/vmx/ppc-xlate.pl
IBM ServeRAID RAID DRIVER
S: Orphan
@@ -6499,11 +6476,6 @@
F: drivers/mfd/lpc_ich.c
F: drivers/gpio/gpio-ich.c
-IDT VersaClock 5 CLOCK DRIVER
-M: Marek Vasut <marek.vasut@gmail.com>
-S: Maintained
-F: drivers/clk/clk-versaclock5.c
-
IDE SUBSYSTEM
M: "David S. Miller" <davem@davemloft.net>
L: linux-ide@vger.kernel.org
@@ -6514,6 +6486,13 @@
F: drivers/ide/
F: include/linux/ide.h
+IDE/ATAPI DRIVERS
+M: Borislav Petkov <bp@alien8.de>
+L: linux-ide@vger.kernel.org
+S: Maintained
+F: Documentation/cdrom/ide-cd
+F: drivers/ide/ide-cd*
+
IDEAPAD LAPTOP EXTRAS DRIVER
M: Ike Panhc <ike.pan@canonical.com>
L: platform-driver-x86@vger.kernel.org
@@ -6528,12 +6507,10 @@
S: Maintained
F: drivers/input/misc/ideapad_slidebar.c
-IDE/ATAPI DRIVERS
-M: Borislav Petkov <bp@alien8.de>
-L: linux-ide@vger.kernel.org
+IDT VersaClock 5 CLOCK DRIVER
+M: Marek Vasut <marek.vasut@gmail.com>
S: Maintained
-F: Documentation/cdrom/ide-cd
-F: drivers/ide/ide-cd*
+F: drivers/clk/clk-versaclock5.c
IEEE 802.15.4 SUBSYSTEM
M: Alexander Aring <alex.aring@gmail.com>
@@ -6623,6 +6600,16 @@
F: Documentation/devicetree/bindings/auxdisplay/img-ascii-lcd.txt
F: drivers/auxdisplay/img-ascii-lcd.c
+IMGTEC IR DECODER DRIVER
+M: James Hogan <james.hogan@imgtec.com>
+S: Maintained
+F: drivers/media/rc/img-ir/
+
+IMS TWINTURBO FRAMEBUFFER DRIVER
+L: linux-fbdev@vger.kernel.org
+S: Orphan
+F: drivers/video/fbdev/imsttfb.c
+
INA209 HARDWARE MONITOR DRIVER
M: Guenter Roeck <linux@roeck-us.net>
L: linux-hwmon@vger.kernel.org
@@ -6648,37 +6635,6 @@
S: Maintained
F: drivers/ipack/
-INGENIC JZ4780 DMA Driver
-M: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
-S: Maintained
-F: drivers/dma/dma-jz4780.c
-
-INGENIC JZ4780 NAND DRIVER
-M: Harvey Hunt <harveyhuntnexus@gmail.com>
-L: linux-mtd@lists.infradead.org
-S: Maintained
-F: drivers/mtd/nand/jz4780_*
-
-INTEGRITY MEASUREMENT ARCHITECTURE (IMA)
-M: Mimi Zohar <zohar@linux.vnet.ibm.com>
-M: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
-L: linux-ima-devel@lists.sourceforge.net
-L: linux-ima-user@lists.sourceforge.net
-L: linux-security-module@vger.kernel.org
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity.git
-S: Supported
-F: security/integrity/ima/
-
-IMGTEC IR DECODER DRIVER
-M: James Hogan <james.hogan@imgtec.com>
-S: Maintained
-F: drivers/media/rc/img-ir/
-
-IMS TWINTURBO FRAMEBUFFER DRIVER
-L: linux-fbdev@vger.kernel.org
-S: Orphan
-F: drivers/video/fbdev/imsttfb.c
-
INFINIBAND SUBSYSTEM
M: Doug Ledford <dledford@redhat.com>
M: Sean Hefty <sean.hefty@intel.com>
@@ -6695,6 +6651,17 @@
F: include/uapi/rdma/
F: include/rdma/
+INGENIC JZ4780 DMA Driver
+M: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
+S: Maintained
+F: drivers/dma/dma-jz4780.c
+
+INGENIC JZ4780 NAND DRIVER
+M: Harvey Hunt <harveyhuntnexus@gmail.com>
+L: linux-mtd@lists.infradead.org
+S: Maintained
+F: drivers/mtd/nand/jz4780_*
+
INOTIFY
M: John McCutchan <john@johnmccutchan.com>
M: Robert Love <rlove@rlove.org>
@@ -6733,6 +6700,22 @@
S: Maintained
L: linux-crypto@vger.kernel.org
+INTEGRITY MEASUREMENT ARCHITECTURE (IMA)
+M: Mimi Zohar <zohar@linux.vnet.ibm.com>
+M: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
+L: linux-ima-devel@lists.sourceforge.net
+L: linux-ima-user@lists.sourceforge.net
+L: linux-security-module@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity.git
+S: Supported
+F: security/integrity/ima/
+
+INTEL 810/815 FRAMEBUFFER DRIVER
+M: Antonino Daplas <adaplas@gmail.com>
+L: linux-fbdev@vger.kernel.org
+S: Maintained
+F: drivers/video/fbdev/i810/
+
INTEL ASoC BDW/HSW DRIVERS
M: Jie Yang <yang.jie@linux.intel.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
@@ -6750,17 +6733,74 @@
S: Supported
F: drivers/scsi/isci/
+INTEL DRM DRIVERS (excluding Poulsbo, Moorestown and derivative chipsets)
+M: Daniel Vetter <daniel.vetter@intel.com>
+M: Jani Nikula <jani.nikula@linux.intel.com>
+L: intel-gfx@lists.freedesktop.org
+W: https://01.org/linuxgraphics/
+B: https://01.org/linuxgraphics/documentation/how-report-bugs
+C: irc://chat.freenode.net/intel-gfx
+Q: http://patchwork.freedesktop.org/project/intel-gfx/
+T: git git://anongit.freedesktop.org/drm-intel
+S: Supported
+F: drivers/gpu/drm/i915/
+F: include/drm/i915*
+F: include/uapi/drm/i915_drm.h
+F: Documentation/gpu/i915.rst
+
+INTEL ETHERNET DRIVERS
+M: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
+L: intel-wired-lan@lists.osuosl.org (moderated for non-subscribers)
+W: http://www.intel.com/support/feedback.htm
+W: http://e1000.sourceforge.net/
+Q: http://patchwork.ozlabs.org/project/intel-wired-lan/list/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue.git
+S: Supported
+F: Documentation/networking/e100.txt
+F: Documentation/networking/e1000.txt
+F: Documentation/networking/e1000e.txt
+F: Documentation/networking/igb.txt
+F: Documentation/networking/igbvf.txt
+F: Documentation/networking/ixgb.txt
+F: Documentation/networking/ixgbe.txt
+F: Documentation/networking/ixgbevf.txt
+F: Documentation/networking/i40e.txt
+F: Documentation/networking/i40evf.txt
+F: drivers/net/ethernet/intel/
+F: drivers/net/ethernet/intel/*/
+F: include/linux/avf/virtchnl.h
+
+INTEL FRAMEBUFFER DRIVER (excluding 810 and 815)
+M: Maik Broemme <mbroemme@libmpq.org>
+L: linux-fbdev@vger.kernel.org
+S: Maintained
+F: Documentation/fb/intelfb.txt
+F: drivers/video/fbdev/intelfb/
+
+INTEL GVT-g DRIVERS (Intel GPU Virtualization)
+M: Zhenyu Wang <zhenyuw@linux.intel.com>
+M: Zhi Wang <zhi.a.wang@intel.com>
+L: intel-gvt-dev@lists.freedesktop.org
+L: intel-gfx@lists.freedesktop.org
+W: https://01.org/igvt-g
+T: git https://github.com/01org/gvt-linux.git
+S: Supported
+F: drivers/gpu/drm/i915/gvt/
+
INTEL HID EVENT DRIVER
M: Alex Hung <alex.hung@canonical.com>
L: platform-driver-x86@vger.kernel.org
S: Maintained
F: drivers/platform/x86/intel-hid.c
-INTEL VIRTUAL BUTTON DRIVER
-M: AceLan Kao <acelan.kao@canonical.com>
-L: platform-driver-x86@vger.kernel.org
-S: Maintained
-F: drivers/platform/x86/intel-vbtn.c
+INTEL I/OAT DMA DRIVER
+M: Dave Jiang <dave.jiang@intel.com>
+R: Dan Williams <dan.j.williams@intel.com>
+L: dmaengine@vger.kernel.org
+Q: https://patchwork.kernel.org/project/linux-dmaengine/list/
+S: Supported
+F: drivers/dma/ioat*
INTEL IDLE DRIVER
M: Jacob Pan <jacob.jun.pan@linux.intel.com>
@@ -6778,41 +6818,6 @@
S: Maintained
F: drivers/hid/intel-ish-hid/
-INTEL PSTATE DRIVER
-M: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
-M: Len Brown <lenb@kernel.org>
-L: linux-pm@vger.kernel.org
-S: Supported
-F: drivers/cpufreq/intel_pstate.c
-
-INTEL FRAMEBUFFER DRIVER (excluding 810 and 815)
-M: Maik Broemme <mbroemme@libmpq.org>
-L: linux-fbdev@vger.kernel.org
-S: Maintained
-F: Documentation/fb/intelfb.txt
-F: drivers/video/fbdev/intelfb/
-
-INTEL 810/815 FRAMEBUFFER DRIVER
-M: Antonino Daplas <adaplas@gmail.com>
-L: linux-fbdev@vger.kernel.org
-S: Maintained
-F: drivers/video/fbdev/i810/
-
-INTEL MENLOW THERMAL DRIVER
-M: Sujith Thomas <sujith.thomas@intel.com>
-L: platform-driver-x86@vger.kernel.org
-W: https://01.org/linux-acpi
-S: Supported
-F: drivers/platform/x86/intel_menlow.c
-
-INTEL I/OAT DMA DRIVER
-M: Dave Jiang <dave.jiang@intel.com>
-R: Dan Williams <dan.j.williams@intel.com>
-L: dmaengine@vger.kernel.org
-Q: https://patchwork.kernel.org/project/linux-dmaengine/list/
-S: Supported
-F: drivers/dma/ioat*
-
INTEL IOMMU (VT-d)
M: David Woodhouse <dwmw2@infradead.org>
L: iommu@lists.linux-foundation.org
@@ -6841,35 +6846,23 @@
S: Maintained
F: drivers/char/hw_random/ixp4xx-rng.c
-INTEL ETHERNET DRIVERS
-M: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-L: intel-wired-lan@lists.osuosl.org (moderated for non-subscribers)
-W: http://www.intel.com/support/feedback.htm
-W: http://e1000.sourceforge.net/
-Q: http://patchwork.ozlabs.org/project/intel-wired-lan/list/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue.git
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue.git
+INTEL MANAGEMENT ENGINE (mei)
+M: Tomas Winkler <tomas.winkler@intel.com>
+L: linux-kernel@vger.kernel.org
S: Supported
-F: Documentation/networking/e100.txt
-F: Documentation/networking/e1000.txt
-F: Documentation/networking/e1000e.txt
-F: Documentation/networking/igb.txt
-F: Documentation/networking/igbvf.txt
-F: Documentation/networking/ixgb.txt
-F: Documentation/networking/ixgbe.txt
-F: Documentation/networking/ixgbevf.txt
-F: Documentation/networking/i40e.txt
-F: Documentation/networking/i40evf.txt
-F: drivers/net/ethernet/intel/
-F: drivers/net/ethernet/intel/*/
-F: include/linux/avf/virtchnl.h
+F: include/uapi/linux/mei.h
+F: include/linux/mei_cl_bus.h
+F: drivers/misc/mei/*
+F: drivers/watchdog/mei_wdt.c
+F: Documentation/misc-devices/mei/*
+F: samples/mei/*
-INTEL RDMA RNIC DRIVER
-M: Faisal Latif <faisal.latif@intel.com>
-M: Shiraz Saleem <shiraz.saleem@intel.com>
-L: linux-rdma@vger.kernel.org
-S: Supported
-F: drivers/infiniband/hw/i40iw/
+INTEL MENLOW THERMAL DRIVER
+M: Sujith Thomas <sujith.thomas@intel.com>
+L: platform-driver-x86@vger.kernel.org
+W: https://01.org/linux-acpi
+S: Supported
+F: drivers/platform/x86/intel_menlow.c
INTEL MERRIFIELD GPIO DRIVER
M: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
@@ -6877,11 +6870,38 @@
S: Maintained
F: drivers/gpio/gpio-merrifield.c
-INTEL-MID GPIO DRIVER
-M: David Cohen <david.a.cohen@linux.intel.com>
-L: linux-gpio@vger.kernel.org
+INTEL MIC DRIVERS (mic)
+M: Sudeep Dutt <sudeep.dutt@intel.com>
+M: Ashutosh Dixit <ashutosh.dixit@intel.com>
+S: Supported
+W: https://github.com/sudeepdutt/mic
+W: http://software.intel.com/en-us/mic-developer
+F: include/linux/mic_bus.h
+F: include/linux/scif.h
+F: include/uapi/linux/mic_common.h
+F: include/uapi/linux/mic_ioctl.h
+F: include/uapi/linux/scif_ioctl.h
+F: drivers/misc/mic/
+F: drivers/dma/mic_x100_dma.c
+F: drivers/dma/mic_x100_dma.h
+F: Documentation/mic/
+
+INTEL PMC CORE DRIVER
+M: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
+M: Vishwanath Somayaji <vishwanath.somayaji@intel.com>
+L: platform-driver-x86@vger.kernel.org
S: Maintained
-F: drivers/gpio/gpio-intel-mid.c
+F: arch/x86/include/asm/pmc_core.h
+F: drivers/platform/x86/intel_pmc_core*
+
+INTEL PMC/P-Unit IPC DRIVER
+M: Zha Qipeng<qipeng.zha@intel.com>
+L: platform-driver-x86@vger.kernel.org
+S: Maintained
+F: drivers/platform/x86/intel_pmc_ipc.c
+F: drivers/platform/x86/intel_punit_ipc.c
+F: arch/x86/include/asm/intel_pmc_ipc.h
+F: arch/x86/include/asm/intel_punit_ipc.h
INTEL PRO/WIRELESS 2100, 2200BG, 2915ABG NETWORK CONNECTION SUPPORT
M: Stanislav Yakovlev <stas.yakovlev@gmail.com>
@@ -6891,31 +6911,32 @@
F: Documentation/networking/README.ipw2200
F: drivers/net/wireless/intel/ipw2x00/
-INTEL(R) TRACE HUB
-M: Alexander Shishkin <alexander.shishkin@linux.intel.com>
+INTEL PSTATE DRIVER
+M: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
+M: Len Brown <lenb@kernel.org>
+L: linux-pm@vger.kernel.org
S: Supported
-F: Documentation/trace/intel_th.txt
-F: drivers/hwtracing/intel_th/
+F: drivers/cpufreq/intel_pstate.c
-INTEL(R) TRUSTED EXECUTION TECHNOLOGY (TXT)
-M: Ning Sun <ning.sun@intel.com>
-L: tboot-devel@lists.sourceforge.net
-W: http://tboot.sourceforge.net
-T: hg http://tboot.hg.sourceforge.net:8000/hgroot/tboot/tboot
+INTEL RDMA RNIC DRIVER
+M: Faisal Latif <faisal.latif@intel.com>
+M: Shiraz Saleem <shiraz.saleem@intel.com>
+L: linux-rdma@vger.kernel.org
S: Supported
-F: Documentation/intel_txt.txt
-F: include/linux/tboot.h
-F: arch/x86/kernel/tboot.c
+F: drivers/infiniband/hw/i40iw/
-INTEL WIRELESS WIMAX CONNECTION 2400
-M: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
-M: linux-wimax@intel.com
-L: wimax@linuxwimax.org (subscribers-only)
-S: Supported
-W: http://linuxwimax.org
-F: Documentation/wimax/README.i2400m
-F: drivers/net/wimax/i2400m/
-F: include/uapi/linux/wimax/i2400m.h
+INTEL TELEMETRY DRIVER
+M: Souvik Kumar Chakravarty <souvik.k.chakravarty@intel.com>
+L: platform-driver-x86@vger.kernel.org
+S: Maintained
+F: arch/x86/include/asm/intel_telemetry.h
+F: drivers/platform/x86/intel_telemetry*
+
+INTEL VIRTUAL BUTTON DRIVER
+M: AceLan Kao <acelan.kao@canonical.com>
+L: platform-driver-x86@vger.kernel.org
+S: Maintained
+F: drivers/platform/x86/intel-vbtn.c
INTEL WIRELESS 3945ABG/BG, 4965AGN (iwlegacy)
M: Stanislaw Gruszka <sgruszka@redhat.com>
@@ -6934,56 +6955,37 @@
S: Supported
F: drivers/net/wireless/intel/iwlwifi/
-INTEL MANAGEMENT ENGINE (mei)
-M: Tomas Winkler <tomas.winkler@intel.com>
-L: linux-kernel@vger.kernel.org
+INTEL WIRELESS WIMAX CONNECTION 2400
+M: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+M: linux-wimax@intel.com
+L: wimax@linuxwimax.org (subscribers-only)
S: Supported
-F: include/uapi/linux/mei.h
-F: include/linux/mei_cl_bus.h
-F: drivers/misc/mei/*
-F: drivers/watchdog/mei_wdt.c
-F: Documentation/misc-devices/mei/*
-F: samples/mei/*
+W: http://linuxwimax.org
+F: Documentation/wimax/README.i2400m
+F: drivers/net/wimax/i2400m/
+F: include/uapi/linux/wimax/i2400m.h
-INTEL MIC DRIVERS (mic)
-M: Sudeep Dutt <sudeep.dutt@intel.com>
-M: Ashutosh Dixit <ashutosh.dixit@intel.com>
+INTEL(R) TRACE HUB
+M: Alexander Shishkin <alexander.shishkin@linux.intel.com>
S: Supported
-W: https://github.com/sudeepdutt/mic
-W: http://software.intel.com/en-us/mic-developer
-F: include/linux/mic_bus.h
-F: include/linux/scif.h
-F: include/uapi/linux/mic_common.h
-F: include/uapi/linux/mic_ioctl.h
-F: include/uapi/linux/scif_ioctl.h
-F: drivers/misc/mic/
-F: drivers/dma/mic_x100_dma.c
-F: drivers/dma/mic_x100_dma.h
-F: Documentation/mic/
+F: Documentation/trace/intel_th.txt
+F: drivers/hwtracing/intel_th/
-INTEL PMC/P-Unit IPC DRIVER
-M: Zha Qipeng<qipeng.zha@intel.com>
-L: platform-driver-x86@vger.kernel.org
-S: Maintained
-F: drivers/platform/x86/intel_pmc_ipc.c
-F: drivers/platform/x86/intel_punit_ipc.c
-F: arch/x86/include/asm/intel_pmc_ipc.h
-F: arch/x86/include/asm/intel_punit_ipc.h
+INTEL(R) TRUSTED EXECUTION TECHNOLOGY (TXT)
+M: Ning Sun <ning.sun@intel.com>
+L: tboot-devel@lists.sourceforge.net
+W: http://tboot.sourceforge.net
+T: hg http://tboot.hg.sourceforge.net:8000/hgroot/tboot/tboot
+S: Supported
+F: Documentation/intel_txt.txt
+F: include/linux/tboot.h
+F: arch/x86/kernel/tboot.c
-INTEL TELEMETRY DRIVER
-M: Souvik Kumar Chakravarty <souvik.k.chakravarty@intel.com>
-L: platform-driver-x86@vger.kernel.org
+INTEL-MID GPIO DRIVER
+M: David Cohen <david.a.cohen@linux.intel.com>
+L: linux-gpio@vger.kernel.org
S: Maintained
-F: arch/x86/include/asm/intel_telemetry.h
-F: drivers/platform/x86/intel_telemetry*
-
-INTEL PMC CORE DRIVER
-M: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
-M: Vishwanath Somayaji <vishwanath.somayaji@intel.com>
-L: platform-driver-x86@vger.kernel.org
-S: Maintained
-F: arch/x86/include/asm/pmc_core.h
-F: drivers/platform/x86/intel_pmc_core*
+F: drivers/gpio/gpio-intel-mid.c
INVENSENSE MPU-3050 GYROSCOPE DRIVER
M: Linus Walleij <linus.walleij@linaro.org>
@@ -7029,13 +7031,6 @@
F: include/linux/ipmi*
F: include/uapi/linux/ipmi*
-QCOM AUDIO (ASoC) DRIVERS
-M: Patrick Lai <plai@codeaurora.org>
-M: Banajit Goswami <bgoswami@codeaurora.org>
-L: alsa-devel@alsa-project.org (moderated for non-subscribers)
-S: Supported
-F: sound/soc/qcom/
-
IPS SCSI RAID DRIVER
M: Adaptec OEM Raid Solutions <aacraid@adaptec.com>
L: linux-scsi@vger.kernel.org
@@ -7082,6 +7077,15 @@
F: include/net/irda/
F: net/irda/
+IRQ DOMAINS (IRQ NUMBER MAPPING LIBRARY)
+M: Marc Zyngier <marc.zyngier@arm.com>
+S: Maintained
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
+F: Documentation/IRQ-domain.txt
+F: include/linux/irqdomain.h
+F: kernel/irq/irqdomain.c
+F: kernel/irq/msi.c
+
IRQ SUBSYSTEM
M: Thomas Gleixner <tglx@linutronix.de>
L: linux-kernel@vger.kernel.org
@@ -7100,15 +7104,6 @@
F: Documentation/devicetree/bindings/interrupt-controller/
F: drivers/irqchip/
-IRQ DOMAINS (IRQ NUMBER MAPPING LIBRARY)
-M: Marc Zyngier <marc.zyngier@arm.com>
-S: Maintained
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
-F: Documentation/IRQ-domain.txt
-F: include/linux/irqdomain.h
-F: kernel/irq/irqdomain.c
-F: kernel/irq/msi.c
-
ISA
M: William Breathitt Gray <vilhelm.gray@gmail.com>
S: Maintained
@@ -7116,13 +7111,6 @@
F: drivers/base/isa.c
F: include/linux/isa.h
-ISAPNP
-M: Jaroslav Kysela <perex@perex.cz>
-S: Maintained
-F: Documentation/isapnp.txt
-F: drivers/pnp/isapnp/
-F: include/linux/isapnp.h
-
ISA RADIO MODULE
M: Hans Verkuil <hverkuil@xs4all.nl>
L: linux-media@vger.kernel.org
@@ -7131,11 +7119,12 @@
S: Maintained
F: drivers/media/radio/radio-isa*
-iSCSI BOOT FIRMWARE TABLE (iBFT) DRIVER
-M: Peter Jones <pjones@redhat.com>
-M: Konrad Rzeszutek Wilk <konrad@kernel.org>
+ISAPNP
+M: Jaroslav Kysela <perex@perex.cz>
S: Maintained
-F: drivers/firmware/iscsi_ibft*
+F: Documentation/isapnp.txt
+F: drivers/pnp/isapnp/
+F: include/linux/isapnp.h
ISCSI
M: Lee Duncan <lduncan@suse.com>
@@ -7146,6 +7135,12 @@
F: drivers/scsi/*iscsi*
F: include/scsi/*iscsi*
+iSCSI BOOT FIRMWARE TABLE (iBFT) DRIVER
+M: Peter Jones <pjones@redhat.com>
+M: Konrad Rzeszutek Wilk <konrad@kernel.org>
+S: Maintained
+F: drivers/firmware/iscsi_ibft*
+
ISCSI EXTENSIONS FOR RDMA (ISER) INITIATOR
M: Or Gerlitz <ogerlitz@mellanox.com>
M: Sagi Grimberg <sagi@grimberg.me>
@@ -7401,27 +7396,6 @@
F: arch/x86/include/asm/svm.h
F: arch/x86/kvm/svm.c
-KERNEL VIRTUAL MACHINE (KVM) FOR POWERPC
-M: Alexander Graf <agraf@suse.com>
-L: kvm-ppc@vger.kernel.org
-W: http://www.linux-kvm.org/
-T: git git://github.com/agraf/linux-2.6.git
-S: Supported
-F: arch/powerpc/include/asm/kvm*
-F: arch/powerpc/kvm/
-
-KERNEL VIRTUAL MACHINE for s390 (KVM/s390)
-M: Christian Borntraeger <borntraeger@de.ibm.com>
-M: Cornelia Huck <cohuck@redhat.com>
-L: linux-s390@vger.kernel.org
-W: http://www.ibm.com/developerworks/linux/linux390/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux.git
-S: Supported
-F: Documentation/s390/kvm.txt
-F: arch/s390/include/asm/kvm*
-F: arch/s390/kvm/
-F: arch/s390/mm/gmap.c
-
KERNEL VIRTUAL MACHINE (KVM) FOR ARM
M: Christoffer Dall <christoffer.dall@linaro.org>
M: Marc Zyngier <marc.zyngier@arm.com>
@@ -7436,6 +7410,15 @@
F: virt/kvm/arm/
F: include/kvm/arm_*
+KERNEL VIRTUAL MACHINE (KVM) FOR POWERPC
+M: Alexander Graf <agraf@suse.com>
+L: kvm-ppc@vger.kernel.org
+W: http://www.linux-kvm.org/
+T: git git://github.com/agraf/linux-2.6.git
+S: Supported
+F: arch/powerpc/include/asm/kvm*
+F: arch/powerpc/kvm/
+
KERNEL VIRTUAL MACHINE FOR ARM64 (KVM/arm64)
M: Christoffer Dall <christoffer.dall@linaro.org>
M: Marc Zyngier <marc.zyngier@arm.com>
@@ -7454,6 +7437,18 @@
F: arch/mips/include/asm/kvm*
F: arch/mips/kvm/
+KERNEL VIRTUAL MACHINE for s390 (KVM/s390)
+M: Christian Borntraeger <borntraeger@de.ibm.com>
+M: Cornelia Huck <cohuck@redhat.com>
+L: linux-s390@vger.kernel.org
+W: http://www.ibm.com/developerworks/linux/linux390/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux.git
+S: Supported
+F: Documentation/s390/kvm.txt
+F: arch/s390/include/asm/kvm*
+F: arch/s390/kvm/
+F: arch/s390/mm/gmap.c
+
KERNFS
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
M: Tejun Heo <tj@kernel.org>
@@ -7471,17 +7466,15 @@
F: include/uapi/linux/kexec.h
F: kernel/kexec*
-KEYS/KEYRINGS:
-M: David Howells <dhowells@redhat.com>
+KEYS-ENCRYPTED
+M: Mimi Zohar <zohar@linux.vnet.ibm.com>
+M: David Safford <safford@us.ibm.com>
+L: linux-security-module@vger.kernel.org
L: keyrings@vger.kernel.org
-S: Maintained
-F: Documentation/security/keys/core.rst
-F: include/linux/key.h
-F: include/linux/key-type.h
-F: include/linux/keyctl.h
-F: include/uapi/linux/keyctl.h
-F: include/keys/
-F: security/keys/
+S: Supported
+F: Documentation/security/keys/trusted-encrypted.rst
+F: include/keys/encrypted-type.h
+F: security/keys/encrypted-keys/
KEYS-TRUSTED
M: David Safford <safford@us.ibm.com>
@@ -7494,15 +7487,17 @@
F: security/keys/trusted.c
F: security/keys/trusted.h
-KEYS-ENCRYPTED
-M: Mimi Zohar <zohar@linux.vnet.ibm.com>
-M: David Safford <safford@us.ibm.com>
-L: linux-security-module@vger.kernel.org
+KEYS/KEYRINGS:
+M: David Howells <dhowells@redhat.com>
L: keyrings@vger.kernel.org
-S: Supported
-F: Documentation/security/keys/trusted-encrypted.rst
-F: include/keys/encrypted-type.h
-F: security/keys/encrypted-keys/
+S: Maintained
+F: Documentation/security/keys/core.rst
+F: include/linux/key.h
+F: include/linux/key-type.h
+F: include/linux/keyctl.h
+F: include/uapi/linux/keyctl.h
+F: include/keys/
+F: security/keys/
KGDB / KDB /debug_core
M: Jason Wessel <jason.wessel@windriver.com>
@@ -7535,6 +7530,15 @@
F: mm/kmemleak.c
F: mm/kmemleak-test.c
+KMOD MODULE USERMODE HELPER
+M: "Luis R. Rodriguez" <mcgrof@kernel.org>
+L: linux-kernel@vger.kernel.org
+S: Maintained
+F: kernel/kmod.c
+F: include/linux/kmod.h
+F: lib/test_kmod.c
+F: tools/testing/selftests/kmod/
+
KPROBES
M: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
M: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
@@ -7637,16 +7641,6 @@
F: include/linux/lguest*.h
F: tools/lguest/
-LIBATA SUBSYSTEM (Serial and Parallel ATA drivers)
-M: Tejun Heo <tj@kernel.org>
-L: linux-ide@vger.kernel.org
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
-S: Maintained
-F: drivers/ata/
-F: include/linux/ata.h
-F: include/linux/libata.h
-F: Documentation/devicetree/bindings/ata/
-
LIBATA PATA ARASAN COMPACT FLASH CONTROLLER
M: Viresh Kumar <vireshk@kernel.org>
L: linux-ide@vger.kernel.org
@@ -7690,22 +7684,21 @@
S: Maintained
F: drivers/ata/sata_promise.*
+LIBATA SUBSYSTEM (Serial and Parallel ATA drivers)
+M: Tejun Heo <tj@kernel.org>
+L: linux-ide@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
+S: Maintained
+F: drivers/ata/
+F: include/linux/ata.h
+F: include/linux/libata.h
+F: Documentation/devicetree/bindings/ata/
+
LIBLOCKDEP
M: Sasha Levin <alexander.levin@verizon.com>
S: Maintained
F: tools/lib/lockdep/
-LIBNVDIMM: NON-VOLATILE MEMORY DEVICE SUBSYSTEM
-M: Dan Williams <dan.j.williams@intel.com>
-L: linux-nvdimm@lists.01.org
-Q: https://patchwork.kernel.org/project/linux-nvdimm/list/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm.git
-S: Supported
-F: drivers/nvdimm/*
-F: include/linux/nd.h
-F: include/linux/libnvdimm.h
-F: include/uapi/linux/ndctl.h
-
LIBNVDIMM BLK: MMIO-APERTURE DRIVER
M: Ross Zwisler <ross.zwisler@linux.intel.com>
L: linux-nvdimm@lists.01.org
@@ -7713,7 +7706,6 @@
S: Supported
F: drivers/nvdimm/blk.c
F: drivers/nvdimm/region_devs.c
-F: drivers/acpi/nfit*
LIBNVDIMM BTT: BLOCK TRANSLATION TABLE
M: Vishal Verma <vishal.l.verma@intel.com>
@@ -7729,6 +7721,18 @@
S: Supported
F: drivers/nvdimm/pmem*
+LIBNVDIMM: NON-VOLATILE MEMORY DEVICE SUBSYSTEM
+M: Dan Williams <dan.j.williams@intel.com>
+L: linux-nvdimm@lists.01.org
+Q: https://patchwork.kernel.org/project/linux-nvdimm/list/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm.git
+S: Supported
+F: drivers/nvdimm/*
+F: drivers/acpi/nfit/*
+F: include/linux/nd.h
+F: include/linux/libnvdimm.h
+F: include/uapi/linux/ndctl.h
+
LIGHTNVM PLATFORM SUPPORT
M: Matias Bjorling <mb@lightnvm.io>
W: http://github/OpenChannelSSD
@@ -7738,6 +7742,14 @@
F: include/linux/lightnvm.h
F: include/uapi/linux/lightnvm.h
+LINUX FOR POWER MACINTOSH
+M: Benjamin Herrenschmidt <benh@kernel.crashing.org>
+W: http://www.penguinppc.org/
+L: linuxppc-dev@lists.ozlabs.org
+S: Maintained
+F: arch/powerpc/platforms/powermac/
+F: drivers/macintosh/
+
LINUX FOR POWERPC (32-BIT AND 64-BIT)
M: Benjamin Herrenschmidt <benh@kernel.crashing.org>
M: Paul Mackerras <paulus@samba.org>
@@ -7771,14 +7783,6 @@
N: [^a-z0-9]ps3
N: pseries
-LINUX FOR POWER MACINTOSH
-M: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-W: http://www.penguinppc.org/
-L: linuxppc-dev@lists.ozlabs.org
-S: Maintained
-F: arch/powerpc/platforms/powermac/
-F: drivers/macintosh/
-
LINUX FOR POWERPC EMBEDDED MPC5XXX
M: Anatolij Gustschin <agust@denx.de>
L: linuxppc-dev@lists.ozlabs.org
@@ -7796,19 +7800,6 @@
F: arch/powerpc/platforms/40x/
F: arch/powerpc/platforms/44x/
-LINUX FOR POWERPC EMBEDDED XILINX VIRTEX
-L: linuxppc-dev@lists.ozlabs.org
-S: Orphan
-F: arch/powerpc/*/*virtex*
-F: arch/powerpc/*/*/*virtex*
-
-LINUX FOR POWERPC EMBEDDED PPC8XX
-M: Vitaly Bordug <vitb@kernel.crashing.org>
-W: http://www.penguinppc.org/
-L: linuxppc-dev@lists.ozlabs.org
-S: Maintained
-F: arch/powerpc/platforms/8xx/
-
LINUX FOR POWERPC EMBEDDED PPC83XX AND PPC85XX
M: Scott Wood <oss@buserror.net>
M: Kumar Gala <galak@kernel.crashing.org>
@@ -7820,6 +7811,19 @@
F: arch/powerpc/platforms/85xx/
F: Documentation/devicetree/bindings/powerpc/fsl/
+LINUX FOR POWERPC EMBEDDED PPC8XX
+M: Vitaly Bordug <vitb@kernel.crashing.org>
+W: http://www.penguinppc.org/
+L: linuxppc-dev@lists.ozlabs.org
+S: Maintained
+F: arch/powerpc/platforms/8xx/
+
+LINUX FOR POWERPC EMBEDDED XILINX VIRTEX
+L: linuxppc-dev@lists.ozlabs.org
+S: Orphan
+F: arch/powerpc/*/*virtex*
+F: arch/powerpc/*/*/*virtex*
+
LINUX FOR POWERPC PA SEMI PWRFICIENT
L: linuxppc-dev@lists.ozlabs.org
S: Orphan
@@ -7827,6 +7831,11 @@
F: drivers/*/*pasemi*
F: drivers/*/*/*pasemi*
+LINUX KERNEL DUMP TEST MODULE (LKDTM)
+M: Kees Cook <keescook@chromium.org>
+S: Maintained
+F: drivers/misc/lkdtm*
+
LINUX SECURITY MODULE (LSM) FRAMEWORK
M: Chris Wright <chrisw@sous-sol.org>
L: linux-security-module@vger.kernel.org
@@ -7856,11 +7865,6 @@
L: live-patching@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching.git
-LINUX KERNEL DUMP TEST MODULE (LKDTM)
-M: Kees Cook <keescook@chromium.org>
-S: Maintained
-F: drivers/misc/lkdtm*
-
LLC (802.2)
L: netdev@vger.kernel.org
S: Odd fixes
@@ -7913,6 +7917,13 @@
S: Maintained
F: drivers/media/usb/dvb-usb-v2/lmedm04*
+LOADPIN SECURITY MODULE
+M: Kees Cook <keescook@chromium.org>
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git lsm/loadpin
+S: Supported
+F: security/loadpin/
+F: Documentation/admin-guide/LSM/LoadPin.rst
+
LOCKING PRIMITIVES
M: Peter Zijlstra <peterz@infradead.org>
M: Ingo Molnar <mingo@redhat.com>
@@ -8203,14 +8214,6 @@
F: Documentation/devicetree/bindings/sound/max9860.txt
F: sound/soc/codecs/max9860.*
-MAXIM MUIC CHARGER DRIVERS FOR EXYNOS BASED BOARDS
-M: Krzysztof Kozlowski <krzk@kernel.org>
-M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
-L: linux-pm@vger.kernel.org
-S: Supported
-F: drivers/power/supply/max14577_charger.c
-F: drivers/power/supply/max77693_charger.c
-
MAXIM MAX77802 PMIC REGULATOR DEVICE DRIVER
M: Javier Martinez Canillas <javier@dowhile0.org>
L: linux-kernel@vger.kernel.org
@@ -8219,6 +8222,14 @@
F: Documentation/devicetree/bindings/*/*max77802.txt
F: include/dt-bindings/*/*max77802.h
+MAXIM MUIC CHARGER DRIVERS FOR EXYNOS BASED BOARDS
+M: Krzysztof Kozlowski <krzk@kernel.org>
+M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
+L: linux-pm@vger.kernel.org
+S: Supported
+F: drivers/power/supply/max14577_charger.c
+F: drivers/power/supply/max77693_charger.c
+
MAXIM PMIC AND MUIC DRIVERS FOR EXYNOS BASED BOARDS
M: Chanwoo Choi <cw00.choi@samsung.com>
M: Krzysztof Kozlowski <krzk@kernel.org>
@@ -8261,14 +8272,25 @@
S: Maintained
F: drivers/iio/dac/cio-dac.c
-MEDIA DRIVERS FOR RENESAS - DRIF
-M: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
+MEDIA DRIVERS FOR ASCOT2E
+M: Sergey Kozlov <serjk@netup.ru>
+M: Abylay Ospan <aospan@netup.ru>
L: linux-media@vger.kernel.org
-L: linux-renesas-soc@vger.kernel.org
+W: https://linuxtv.org
+W: http://netup.tv/
T: git git://linuxtv.org/media_tree.git
S: Supported
-F: Documentation/devicetree/bindings/media/renesas,drif.txt
-F: drivers/media/platform/rcar_drif.c
+F: drivers/media/dvb-frontends/ascot2e*
+
+MEDIA DRIVERS FOR CXD2841ER
+M: Sergey Kozlov <serjk@netup.ru>
+M: Abylay Ospan <aospan@netup.ru>
+L: linux-media@vger.kernel.org
+W: https://linuxtv.org
+W: http://netup.tv/
+T: git git://linuxtv.org/media_tree.git
+S: Supported
+F: drivers/media/dvb-frontends/cxd2841er*
MEDIA DRIVERS FOR FREESCALE IMX
M: Steve Longerbeam <slongerbeam@gmail.com>
@@ -8282,6 +8304,54 @@
F: include/linux/imx-media.h
F: include/media/imx.h
+MEDIA DRIVERS FOR HELENE
+M: Abylay Ospan <aospan@netup.ru>
+L: linux-media@vger.kernel.org
+W: https://linuxtv.org
+W: http://netup.tv/
+T: git git://linuxtv.org/media_tree.git
+S: Supported
+F: drivers/media/dvb-frontends/helene*
+
+MEDIA DRIVERS FOR HORUS3A
+M: Sergey Kozlov <serjk@netup.ru>
+M: Abylay Ospan <aospan@netup.ru>
+L: linux-media@vger.kernel.org
+W: https://linuxtv.org
+W: http://netup.tv/
+T: git git://linuxtv.org/media_tree.git
+S: Supported
+F: drivers/media/dvb-frontends/horus3a*
+
+MEDIA DRIVERS FOR LNBH25
+M: Sergey Kozlov <serjk@netup.ru>
+M: Abylay Ospan <aospan@netup.ru>
+L: linux-media@vger.kernel.org
+W: https://linuxtv.org
+W: http://netup.tv/
+T: git git://linuxtv.org/media_tree.git
+S: Supported
+F: drivers/media/dvb-frontends/lnbh25*
+
+MEDIA DRIVERS FOR NETUP PCI UNIVERSAL DVB devices
+M: Sergey Kozlov <serjk@netup.ru>
+M: Abylay Ospan <aospan@netup.ru>
+L: linux-media@vger.kernel.org
+W: https://linuxtv.org
+W: http://netup.tv/
+T: git git://linuxtv.org/media_tree.git
+S: Supported
+F: drivers/media/pci/netup_unidvb/*
+
+MEDIA DRIVERS FOR RENESAS - DRIF
+M: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
+L: linux-media@vger.kernel.org
+L: linux-renesas-soc@vger.kernel.org
+T: git git://linuxtv.org/media_tree.git
+S: Supported
+F: Documentation/devicetree/bindings/media/renesas,drif.txt
+F: drivers/media/platform/rcar_drif.c
+
MEDIA DRIVERS FOR RENESAS - FCP
M: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
L: linux-media@vger.kernel.org
@@ -8319,65 +8389,6 @@
F: Documentation/devicetree/bindings/media/renesas,vsp1.txt
F: drivers/media/platform/vsp1/
-MEDIA DRIVERS FOR HELENE
-M: Abylay Ospan <aospan@netup.ru>
-L: linux-media@vger.kernel.org
-W: https://linuxtv.org
-W: http://netup.tv/
-T: git git://linuxtv.org/media_tree.git
-S: Supported
-F: drivers/media/dvb-frontends/helene*
-
-MEDIA DRIVERS FOR ASCOT2E
-M: Sergey Kozlov <serjk@netup.ru>
-M: Abylay Ospan <aospan@netup.ru>
-L: linux-media@vger.kernel.org
-W: https://linuxtv.org
-W: http://netup.tv/
-T: git git://linuxtv.org/media_tree.git
-S: Supported
-F: drivers/media/dvb-frontends/ascot2e*
-
-MEDIA DRIVERS FOR CXD2841ER
-M: Sergey Kozlov <serjk@netup.ru>
-M: Abylay Ospan <aospan@netup.ru>
-L: linux-media@vger.kernel.org
-W: https://linuxtv.org
-W: http://netup.tv/
-T: git git://linuxtv.org/media_tree.git
-S: Supported
-F: drivers/media/dvb-frontends/cxd2841er*
-
-MEDIA DRIVERS FOR HORUS3A
-M: Sergey Kozlov <serjk@netup.ru>
-M: Abylay Ospan <aospan@netup.ru>
-L: linux-media@vger.kernel.org
-W: https://linuxtv.org
-W: http://netup.tv/
-T: git git://linuxtv.org/media_tree.git
-S: Supported
-F: drivers/media/dvb-frontends/horus3a*
-
-MEDIA DRIVERS FOR LNBH25
-M: Sergey Kozlov <serjk@netup.ru>
-M: Abylay Ospan <aospan@netup.ru>
-L: linux-media@vger.kernel.org
-W: https://linuxtv.org
-W: http://netup.tv/
-T: git git://linuxtv.org/media_tree.git
-S: Supported
-F: drivers/media/dvb-frontends/lnbh25*
-
-MEDIA DRIVERS FOR NETUP PCI UNIVERSAL DVB devices
-M: Sergey Kozlov <serjk@netup.ru>
-M: Abylay Ospan <aospan@netup.ru>
-L: linux-media@vger.kernel.org
-W: https://linuxtv.org
-W: http://netup.tv/
-T: git git://linuxtv.org/media_tree.git
-S: Supported
-F: drivers/media/pci/netup_unidvb/*
-
MEDIA INPUT INFRASTRUCTURE (V4L/DVB)
M: Mauro Carvalho Chehab <mchehab@s-opensource.com>
M: Mauro Carvalho Chehab <mchehab@kernel.org>
@@ -8415,15 +8426,6 @@
F: drivers/media/platform/mtk-jpeg/
F: Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
-MEDIATEK MEDIA DRIVER
-M: Tiffany Lin <tiffany.lin@mediatek.com>
-M: Andrew-CT Chen <andrew-ct.chen@mediatek.com>
-S: Supported
-F: drivers/media/platform/mtk-vcodec/
-F: drivers/media/platform/mtk-vpu/
-F: Documentation/devicetree/bindings/media/mediatek-vcodec.txt
-F: Documentation/devicetree/bindings/media/mediatek-vpu.txt
-
MEDIATEK MDP DRIVER
M: Minghsiu Tsai <minghsiu.tsai@mediatek.com>
M: Houlong Wei <houlong.wei@mediatek.com>
@@ -8433,6 +8435,15 @@
F: drivers/media/platform/mtk-vpu/
F: Documentation/devicetree/bindings/media/mediatek-mdp.txt
+MEDIATEK MEDIA DRIVER
+M: Tiffany Lin <tiffany.lin@mediatek.com>
+M: Andrew-CT Chen <andrew-ct.chen@mediatek.com>
+S: Supported
+F: drivers/media/platform/mtk-vcodec/
+F: drivers/media/platform/mtk-vpu/
+F: Documentation/devicetree/bindings/media/mediatek-vcodec.txt
+F: Documentation/devicetree/bindings/media/mediatek-vpu.txt
+
MEDIATEK MT7601U WIRELESS LAN DRIVER
M: Jakub Kicinski <kubakici@wp.pl>
L: linux-wireless@vger.kernel.org
@@ -8440,9 +8451,9 @@
F: drivers/net/wireless/mediatek/mt7601u/
MEDIATEK RANDOM NUMBER GENERATOR SUPPORT
-M: Sean Wang <sean.wang@mediatek.com>
-S: Maintained
-F: drivers/char/hw_random/mtk-rng.c
+M: Sean Wang <sean.wang@mediatek.com>
+S: Maintained
+F: drivers/char/hw_random/mtk-rng.c
MEGACHIPS STDPXXXX-GE-B850V3-FW LVDS/DP++ BRIDGES
M: Peter Senna Tschudin <peter.senna@collabora.com>
@@ -8464,6 +8475,13 @@
F: drivers/scsi/megaraid.*
F: drivers/scsi/megaraid/
+MELEXIS MLX90614 DRIVER
+M: Crt Mori <cmo@melexis.com>
+L: linux-iio@vger.kernel.org
+W: http://www.melexis.com
+S: Supported
+F: drivers/iio/temperature/mlx90614.c
+
MELFAS MIP4 TOUCHSCREEN DRIVER
M: Sangwon Jee <jeesw@melfas.com>
W: http://www.melfas.com
@@ -8524,6 +8542,56 @@
Q: http://patchwork.ozlabs.org/project/netdev/list/
F: drivers/net/ethernet/mellanox/mlxfw/
+MELLANOX MLX CPLD HOTPLUG DRIVER
+M: Vadim Pasternak <vadimp@mellanox.com>
+L: platform-driver-x86@vger.kernel.org
+S: Supported
+F: drivers/platform/x86/mlxcpld-hotplug.c
+F: include/linux/platform_data/mlxcpld-hotplug.h
+
+MELLANOX MLX4 core VPI driver
+M: Tariq Toukan <tariqt@mellanox.com>
+L: netdev@vger.kernel.org
+L: linux-rdma@vger.kernel.org
+W: http://www.mellanox.com
+Q: http://patchwork.ozlabs.org/project/netdev/list/
+S: Supported
+F: drivers/net/ethernet/mellanox/mlx4/
+F: include/linux/mlx4/
+
+MELLANOX MLX4 IB driver
+M: Yishai Hadas <yishaih@mellanox.com>
+L: linux-rdma@vger.kernel.org
+W: http://www.mellanox.com
+Q: http://patchwork.kernel.org/project/linux-rdma/list/
+S: Supported
+F: drivers/infiniband/hw/mlx4/
+F: include/linux/mlx4/
+F: include/uapi/rdma/mlx4-abi.h
+
+MELLANOX MLX5 core VPI driver
+M: Saeed Mahameed <saeedm@mellanox.com>
+M: Matan Barak <matanb@mellanox.com>
+M: Leon Romanovsky <leonro@mellanox.com>
+L: netdev@vger.kernel.org
+L: linux-rdma@vger.kernel.org
+W: http://www.mellanox.com
+Q: http://patchwork.ozlabs.org/project/netdev/list/
+S: Supported
+F: drivers/net/ethernet/mellanox/mlx5/core/
+F: include/linux/mlx5/
+
+MELLANOX MLX5 IB driver
+M: Matan Barak <matanb@mellanox.com>
+M: Leon Romanovsky <leonro@mellanox.com>
+L: linux-rdma@vger.kernel.org
+W: http://www.mellanox.com
+Q: http://patchwork.kernel.org/project/linux-rdma/list/
+S: Supported
+F: drivers/infiniband/hw/mlx5/
+F: include/linux/mlx5/
+F: include/uapi/rdma/mlx5-abi.h
+
MELLANOX MLXCPLD I2C AND MUX DRIVER
M: Vadim Pasternak <vadimp@mellanox.com>
M: Michael Shych <michaelsh@mellanox.com>
@@ -8541,26 +8609,10 @@
F: Documentation/leds/leds-mlxcpld.txt
MELLANOX PLATFORM DRIVER
-M: Vadim Pasternak <vadimp@mellanox.com>
-L: platform-driver-x86@vger.kernel.org
-S: Supported
-F: drivers/platform/x86/mlx-platform.c
-
-MELLANOX MLX CPLD HOTPLUG DRIVER
M: Vadim Pasternak <vadimp@mellanox.com>
L: platform-driver-x86@vger.kernel.org
S: Supported
-F: drivers/platform/x86/mlxcpld-hotplug.c
-F: include/linux/platform_data/mlxcpld-hotplug.h
-
-SOFT-ROCE DRIVER (rxe)
-M: Moni Shoua <monis@mellanox.com>
-L: linux-rdma@vger.kernel.org
-S: Supported
-W: https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home
-Q: http://patchwork.kernel.org/project/linux-rdma/list/
-F: drivers/infiniband/sw/rxe/
-F: include/uapi/rdma/rdma_user_rxe.h
+F: drivers/platform/x86/mlx-platform.c
MEMBARRIER SUPPORT
M: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
@@ -8682,6 +8734,18 @@
F: drivers/usb/misc/usb251xb.c
F: Documentation/devicetree/bindings/usb/usb251xb.txt
+MICROSEMI SMART ARRAY SMARTPQI DRIVER (smartpqi)
+M: Don Brace <don.brace@microsemi.com>
+L: esc.storagedev@microsemi.com
+L: linux-scsi@vger.kernel.org
+S: Supported
+F: drivers/scsi/smartpqi/smartpqi*.[ch]
+F: drivers/scsi/smartpqi/Kconfig
+F: drivers/scsi/smartpqi/Makefile
+F: include/linux/cciss*.h
+F: include/uapi/linux/cciss*.h
+F: Documentation/scsi/smartpqi.txt
+
MICROSOFT SURFACE PRO 3 BUTTON DRIVER
M: Chen Yu <yu.c.chen@intel.com>
L: platform-driver-x86@vger.kernel.org
@@ -8704,6 +8768,22 @@
F: Documentation/mips/
F: arch/mips/
+MIPS BOSTON DEVELOPMENT BOARD
+M: Paul Burton <paul.burton@imgtec.com>
+L: linux-mips@linux-mips.org
+S: Maintained
+F: Documentation/devicetree/bindings/clock/img,boston-clock.txt
+F: arch/mips/boot/dts/img/boston.dts
+F: arch/mips/configs/generic/board-boston.config
+F: drivers/clk/imgtec/clk-boston.c
+F: include/dt-bindings/clock/boston-clock.h
+
+MIPS GENERIC PLATFORM
+M: Paul Burton <paul.burton@imgtec.com>
+L: linux-mips@linux-mips.org
+S: Supported
+F: arch/mips/generic/
+
MIPS/LOONGSON1 ARCHITECTURE
M: Keguang Zhang <keguang.zhang@gmail.com>
L: linux-mips@linux-mips.org
@@ -8721,67 +8801,15 @@
S: Odd Fixes
F: drivers/media/radio/radio-miropcm20*
-MELLANOX MLX4 core VPI driver
-M: Tariq Toukan <tariqt@mellanox.com>
-L: netdev@vger.kernel.org
-L: linux-rdma@vger.kernel.org
-W: http://www.mellanox.com
-Q: http://patchwork.ozlabs.org/project/netdev/list/
-S: Supported
-F: drivers/net/ethernet/mellanox/mlx4/
-F: include/linux/mlx4/
-
-MELLANOX MLX4 IB driver
-M: Yishai Hadas <yishaih@mellanox.com>
-L: linux-rdma@vger.kernel.org
-W: http://www.mellanox.com
-Q: http://patchwork.kernel.org/project/linux-rdma/list/
-S: Supported
-F: drivers/infiniband/hw/mlx4/
-F: include/linux/mlx4/
-F: include/uapi/rdma/mlx4-abi.h
-
-MELLANOX MLX5 core VPI driver
-M: Saeed Mahameed <saeedm@mellanox.com>
-M: Matan Barak <matanb@mellanox.com>
-M: Leon Romanovsky <leonro@mellanox.com>
-L: netdev@vger.kernel.org
-L: linux-rdma@vger.kernel.org
-W: http://www.mellanox.com
-Q: http://patchwork.ozlabs.org/project/netdev/list/
-S: Supported
-F: drivers/net/ethernet/mellanox/mlx5/core/
-F: include/linux/mlx5/
-
-MELLANOX MLX5 IB driver
-M: Matan Barak <matanb@mellanox.com>
-M: Leon Romanovsky <leonro@mellanox.com>
-L: linux-rdma@vger.kernel.org
-W: http://www.mellanox.com
-Q: http://patchwork.kernel.org/project/linux-rdma/list/
-S: Supported
-F: drivers/infiniband/hw/mlx5/
-F: include/linux/mlx5/
-F: include/uapi/rdma/mlx5-abi.h
-
-MELEXIS MLX90614 DRIVER
-M: Crt Mori <cmo@melexis.com>
-L: linux-iio@vger.kernel.org
-W: http://www.melexis.com
-S: Supported
-F: drivers/iio/temperature/mlx90614.c
-
-MICROSEMI SMART ARRAY SMARTPQI DRIVER (smartpqi)
-M: Don Brace <don.brace@microsemi.com>
-L: esc.storagedev@microsemi.com
-L: linux-scsi@vger.kernel.org
-S: Supported
-F: drivers/scsi/smartpqi/smartpqi*.[ch]
-F: drivers/scsi/smartpqi/Kconfig
-F: drivers/scsi/smartpqi/Makefile
-F: include/linux/cciss*.h
-F: include/uapi/linux/cciss*.h
-F: Documentation/scsi/smartpqi.txt
+MMP SUPPORT
+M: Eric Miao <eric.y.miao@gmail.com>
+M: Haojian Zhuang <haojian.zhuang@gmail.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+T: git git://github.com/hzhuang1/linux.git
+T: git git://git.linaro.org/people/ycmiao/pxa-linux.git
+S: Maintained
+F: arch/arm/boot/dts/mmp*
+F: arch/arm/mach-mmp/
MN88472 MEDIA DRIVER
M: Antti Palosaari <crope@iki.fi>
@@ -8915,6 +8943,11 @@
F: include/linux/mfd/
F: include/dt-bindings/mfd/
+MULTIMEDIA CARD (MMC) ETC. OVER SPI
+S: Orphan
+F: drivers/mmc/host/mmc_spi.c
+F: include/linux/spi/mmc_spi.h
+
MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM
M: Ulf Hansson <ulf.hansson@linaro.org>
L: linux-mmc@vger.kernel.org
@@ -8925,11 +8958,6 @@
F: include/linux/mmc/
F: include/uapi/linux/mmc/
-MULTIMEDIA CARD (MMC) ETC. OVER SPI
-S: Orphan
-F: drivers/mmc/host/mmc_spi.c
-F: include/linux/spi/mmc_spi.h
-
MULTIPLEXER SUBSYSTEM
M: Peter Rosin <peda@axentia.se>
S: Maintained
@@ -8992,10 +9020,6 @@
F: drivers/mtd/nand/
F: include/linux/mtd/nand*.h
-NATSEMI ETHERNET DRIVER (DP8381x)
-S: Orphan
-F: drivers/net/ethernet/natsemi/natsemi.c
-
NATIVE INSTRUMENTS USB SOUND INTERFACE DRIVER
M: Daniel Mack <zonque@gmail.com>
S: Maintained
@@ -9003,6 +9027,10 @@
W: http://www.native-instruments.com
F: sound/usb/caiaq/
+NATSEMI ETHERNET DRIVER (DP8381x)
+S: Orphan
+F: drivers/net/ethernet/natsemi/natsemi.c
+
NCP FILESYSTEM
M: Petr Vandrovec <petr@vandrovec.name>
S: Odd Fixes
@@ -9122,6 +9150,35 @@
W: https://fedorahosted.org/dropwatch/
F: net/core/drop_monitor.c
+NETWORKING DRIVERS
+L: netdev@vger.kernel.org
+W: http://www.linuxfoundation.org/en/Net
+Q: http://patchwork.ozlabs.org/project/netdev/list/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git
+S: Odd Fixes
+F: Documentation/devicetree/bindings/net/
+F: drivers/net/
+F: include/linux/if_*
+F: include/linux/netdevice.h
+F: include/linux/etherdevice.h
+F: include/linux/fcdevice.h
+F: include/linux/fddidevice.h
+F: include/linux/hippidevice.h
+F: include/linux/inetdevice.h
+F: include/uapi/linux/if_*
+F: include/uapi/linux/netdevice.h
+
+NETWORKING DRIVERS (WIRELESS)
+M: Kalle Valo <kvalo@codeaurora.org>
+L: linux-wireless@vger.kernel.org
+Q: http://patchwork.kernel.org/project/linux-wireless/list/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next.git
+S: Maintained
+F: Documentation/devicetree/bindings/net/wireless/
+F: drivers/net/wireless/
+
NETWORKING [DSA]
M: Andrew Lunn <andrew@lunn.ch>
M: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
@@ -9153,28 +9210,6 @@
F: tools/testing/selftests/net/
F: lib/random32.c
-NETWORKING [IPv4/IPv6]
-M: "David S. Miller" <davem@davemloft.net>
-M: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
-M: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
-L: netdev@vger.kernel.org
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git
-S: Maintained
-F: net/ipv4/
-F: net/ipv6/
-F: include/net/ip*
-F: arch/x86/net/*
-
-NETWORKING [TLS]
-M: Ilya Lesokhin <ilyal@mellanox.com>
-M: Aviad Yehezkel <aviadye@mellanox.com>
-M: Dave Watson <davejwatson@fb.com>
-L: netdev@vger.kernel.org
-S: Maintained
-F: net/tls/*
-F: include/uapi/linux/tls.h
-F: include/net/tls.h
-
NETWORKING [IPSEC]
M: Steffen Klassert <steffen.klassert@secunet.com>
M: Herbert Xu <herbert@gondor.apana.org.au>
@@ -9199,44 +9234,37 @@
F: include/uapi/linux/xfrm.h
F: include/net/xfrm.h
+NETWORKING [IPv4/IPv6]
+M: "David S. Miller" <davem@davemloft.net>
+M: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
+M: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
+L: netdev@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git
+S: Maintained
+F: net/ipv4/
+F: net/ipv6/
+F: include/net/ip*
+F: arch/x86/net/*
+
NETWORKING [LABELED] (NetLabel, CIPSO, Labeled IPsec, SECMARK)
M: Paul Moore <paul@paul-moore.com>
L: netdev@vger.kernel.org
S: Maintained
+NETWORKING [TLS]
+M: Ilya Lesokhin <ilyal@mellanox.com>
+M: Aviad Yehezkel <aviadye@mellanox.com>
+M: Dave Watson <davejwatson@fb.com>
+L: netdev@vger.kernel.org
+S: Maintained
+F: net/tls/*
+F: include/uapi/linux/tls.h
+F: include/net/tls.h
+
NETWORKING [WIRELESS]
L: linux-wireless@vger.kernel.org
Q: http://patchwork.kernel.org/project/linux-wireless/list/
-NETWORKING DRIVERS
-L: netdev@vger.kernel.org
-W: http://www.linuxfoundation.org/en/Net
-Q: http://patchwork.ozlabs.org/project/netdev/list/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git
-S: Odd Fixes
-F: Documentation/devicetree/bindings/net/
-F: drivers/net/
-F: include/linux/if_*
-F: include/linux/netdevice.h
-F: include/linux/etherdevice.h
-F: include/linux/fcdevice.h
-F: include/linux/fddidevice.h
-F: include/linux/hippidevice.h
-F: include/linux/inetdevice.h
-F: include/uapi/linux/if_*
-F: include/uapi/linux/netdevice.h
-
-NETWORKING DRIVERS (WIRELESS)
-M: Kalle Valo <kvalo@codeaurora.org>
-L: linux-wireless@vger.kernel.org
-Q: http://patchwork.kernel.org/project/linux-wireless/list/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers.git
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next.git
-S: Maintained
-F: Documentation/devicetree/bindings/net/wireless/
-F: drivers/net/wireless/
-
NETXEN (1/10) GbE SUPPORT
M: Manish Chopra <manish.chopra@cavium.com>
M: Rahul Verma <rahul.verma@cavium.com>
@@ -9329,14 +9357,6 @@
F: drivers/media/i2c/et8ek8
F: drivers/media/i2c/ad5820.c
-NOKIA N900 CAMERA SUPPORT (ET8EK8 SENSOR, AD5820 FOCUS)
-M: Pavel Machek <pavel@ucw.cz>
-M: Sakari Ailus <sakari.ailus@iki.fi>
-L: linux-media@vger.kernel.org
-S: Maintained
-F: drivers/media/i2c/et8ek8
-F: drivers/media/i2c/ad5820.c
-
NOKIA N900 POWER SUPPLY DRIVERS
R: Pali Rohár <pali.rohar@gmail.com>
F: include/linux/power/bq2415x_charger.h
@@ -9348,6 +9368,12 @@
F: drivers/power/supply/isp1704_charger.c
F: drivers/power/supply/rx51_battery.c
+NTB AMD DRIVER
+M: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
+L: linux-ntb@googlegroups.com
+S: Supported
+F: drivers/ntb/hw/amd/
+
NTB DRIVER CORE
M: Jon Mason <jdmason@kudzu.us>
M: Dave Jiang <dave.jiang@intel.com>
@@ -9362,6 +9388,12 @@
F: include/linux/ntb_transport.h
F: tools/testing/selftests/ntb/
+NTB IDT DRIVER
+M: Serge Semin <fancer.lancer@gmail.com>
+L: linux-ntb@googlegroups.com
+S: Supported
+F: drivers/ntb/hw/idt/
+
NTB INTEL DRIVER
M: Jon Mason <jdmason@kudzu.us>
M: Dave Jiang <dave.jiang@intel.com>
@@ -9371,12 +9403,6 @@
T: git git://github.com/jonmason/ntb.git
F: drivers/ntb/hw/intel/
-NTB AMD DRIVER
-M: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
-L: linux-ntb@googlegroups.com
-S: Supported
-F: drivers/ntb/hw/amd/
-
NTFS FILESYSTEM
M: Anton Altaparmakov <anton@tuxera.com>
L: linux-ntfs-dev@lists.sourceforge.net
@@ -9406,15 +9432,6 @@
F: include/linux/nvme.h
F: include/uapi/linux/nvme_ioctl.h
-NVM EXPRESS TARGET DRIVER
-M: Christoph Hellwig <hch@lst.de>
-M: Sagi Grimberg <sagi@grimberg.me>
-L: linux-nvme@lists.infradead.org
-T: git://git.infradead.org/nvme.git
-W: http://git.infradead.org/nvme.git
-S: Supported
-F: drivers/nvme/target/
-
NVM EXPRESS FC TRANSPORT DRIVERS
M: James Smart <james.smart@broadcom.com>
L: linux-nvme@lists.infradead.org
@@ -9425,6 +9442,15 @@
F: drivers/nvme/target/fc.c
F: drivers/nvme/target/fcloop.c
+NVM EXPRESS TARGET DRIVER
+M: Christoph Hellwig <hch@lst.de>
+M: Sagi Grimberg <sagi@grimberg.me>
+L: linux-nvme@lists.infradead.org
+T: git://git.infradead.org/nvme.git
+W: http://git.infradead.org/nvme.git
+S: Supported
+F: drivers/nvme/target/
+
NVMEM FRAMEWORK
M: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
S: Maintained
@@ -9433,13 +9459,6 @@
F: include/linux/nvmem-consumer.h
F: include/linux/nvmem-provider.h
-NXP-NCI NFC DRIVER
-M: Clément Perrochaud <clement.perrochaud@effinnov.com>
-R: Charles Gorand <charles.gorand@effinnov.com>
-L: linux-nfc@lists.01.org (moderated for non-subscribers)
-S: Supported
-F: drivers/nfc/nxp-nci
-
NXP TDA998X DRM DRIVER
M: Russell King <linux@armlinux.org.uk>
S: Supported
@@ -9454,11 +9473,153 @@
S: Maintained
F: sound/soc/codecs/tfa9879*
+NXP-NCI NFC DRIVER
+M: Clément Perrochaud <clement.perrochaud@effinnov.com>
+R: Charles Gorand <charles.gorand@effinnov.com>
+L: linux-nfc@lists.01.org (moderated for non-subscribers)
+S: Supported
+F: drivers/nfc/nxp-nci
+
OBJTOOL
M: Josh Poimboeuf <jpoimboe@redhat.com>
S: Supported
F: tools/objtool/
+OMAP AUDIO SUPPORT
+M: Peter Ujfalusi <peter.ujfalusi@ti.com>
+M: Jarkko Nikula <jarkko.nikula@bitmer.com>
+L: alsa-devel@alsa-project.org (moderated for non-subscribers)
+L: linux-omap@vger.kernel.org
+S: Maintained
+F: sound/soc/omap/
+
+OMAP CLOCK FRAMEWORK SUPPORT
+M: Paul Walmsley <paul@pwsan.com>
+L: linux-omap@vger.kernel.org
+S: Maintained
+F: arch/arm/*omap*/*clock*
+
+OMAP DEVICE TREE SUPPORT
+M: Benoît Cousson <bcousson@baylibre.com>
+M: Tony Lindgren <tony@atomide.com>
+L: linux-omap@vger.kernel.org
+L: devicetree@vger.kernel.org
+S: Maintained
+F: arch/arm/boot/dts/*omap*
+F: arch/arm/boot/dts/*am3*
+F: arch/arm/boot/dts/*am4*
+F: arch/arm/boot/dts/*am5*
+F: arch/arm/boot/dts/*dra7*
+
+OMAP DISPLAY SUBSYSTEM and FRAMEBUFFER SUPPORT (DSS2)
+M: Tomi Valkeinen <tomi.valkeinen@ti.com>
+L: linux-omap@vger.kernel.org
+L: linux-fbdev@vger.kernel.org
+S: Maintained
+F: drivers/video/fbdev/omap2/
+F: Documentation/arm/OMAP/DSS
+
+OMAP FRAMEBUFFER SUPPORT
+M: Tomi Valkeinen <tomi.valkeinen@ti.com>
+L: linux-fbdev@vger.kernel.org
+L: linux-omap@vger.kernel.org
+S: Maintained
+F: drivers/video/fbdev/omap/
+
+OMAP GENERAL PURPOSE MEMORY CONTROLLER SUPPORT
+M: Roger Quadros <rogerq@ti.com>
+M: Tony Lindgren <tony@atomide.com>
+L: linux-omap@vger.kernel.org
+S: Maintained
+F: drivers/memory/omap-gpmc.c
+F: arch/arm/mach-omap2/*gpmc*
+
+OMAP GPIO DRIVER
+M: Grygorii Strashko <grygorii.strashko@ti.com>
+M: Santosh Shilimkar <ssantosh@kernel.org>
+M: Kevin Hilman <khilman@kernel.org>
+L: linux-omap@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/gpio/gpio-omap.txt
+F: drivers/gpio/gpio-omap.c
+
+OMAP HARDWARE SPINLOCK SUPPORT
+M: Ohad Ben-Cohen <ohad@wizery.com>
+L: linux-omap@vger.kernel.org
+S: Maintained
+F: drivers/hwspinlock/omap_hwspinlock.c
+
+OMAP HS MMC SUPPORT
+L: linux-mmc@vger.kernel.org
+L: linux-omap@vger.kernel.org
+S: Orphan
+F: drivers/mmc/host/omap_hsmmc.c
+
+OMAP HWMOD DATA
+M: Paul Walmsley <paul@pwsan.com>
+L: linux-omap@vger.kernel.org
+S: Maintained
+F: arch/arm/mach-omap2/omap_hwmod*data*
+
+OMAP HWMOD DATA FOR OMAP4-BASED DEVICES
+M: Benoît Cousson <bcousson@baylibre.com>
+L: linux-omap@vger.kernel.org
+S: Maintained
+F: arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+
+OMAP HWMOD SUPPORT
+M: Benoît Cousson <bcousson@baylibre.com>
+M: Paul Walmsley <paul@pwsan.com>
+L: linux-omap@vger.kernel.org
+S: Maintained
+F: arch/arm/mach-omap2/omap_hwmod.*
+
+OMAP IMAGING SUBSYSTEM (OMAP3 ISP and OMAP4 ISS)
+M: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+L: linux-media@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/media/ti,omap3isp.txt
+F: drivers/media/platform/omap3isp/
+F: drivers/staging/media/omap4iss/
+
+OMAP MMC SUPPORT
+M: Jarkko Lavinen <jarkko.lavinen@nokia.com>
+L: linux-omap@vger.kernel.org
+S: Maintained
+F: drivers/mmc/host/omap.c
+
+OMAP POWER MANAGEMENT SUPPORT
+M: Kevin Hilman <khilman@kernel.org>
+L: linux-omap@vger.kernel.org
+S: Maintained
+F: arch/arm/*omap*/*pm*
+F: drivers/cpufreq/omap-cpufreq.c
+
+OMAP POWERDOMAIN SOC ADAPTATION LAYER SUPPORT
+M: Rajendra Nayak <rnayak@codeaurora.org>
+M: Paul Walmsley <paul@pwsan.com>
+L: linux-omap@vger.kernel.org
+S: Maintained
+F: arch/arm/mach-omap2/prm*
+
+OMAP RANDOM NUMBER GENERATOR SUPPORT
+M: Deepak Saxena <dsaxena@plexity.net>
+S: Maintained
+F: drivers/char/hw_random/omap-rng.c
+
+OMAP USB SUPPORT
+L: linux-usb@vger.kernel.org
+L: linux-omap@vger.kernel.org
+S: Orphan
+F: drivers/usb/*/*omap*
+F: arch/arm/*omap*/usb*
+
+OMAP/NEWFLOW NANOBONE MACHINE SUPPORT
+M: Mark Jackson <mpfj@newflow.co.uk>
+L: linux-omap@vger.kernel.org
+S: Maintained
+F: arch/arm/boot/dts/am335x-nano.dts
+
OMAP1 SUPPORT
M: Aaro Koskinen <aaro.koskinen@iki.fi>
M: Tony Lindgren <tony@atomide.com>
@@ -9504,141 +9665,6 @@
F: drivers/regulator/twl6030-regulator.c
F: include/linux/i2c-omap.h
-OMAP DEVICE TREE SUPPORT
-M: Benoît Cousson <bcousson@baylibre.com>
-M: Tony Lindgren <tony@atomide.com>
-L: linux-omap@vger.kernel.org
-L: devicetree@vger.kernel.org
-S: Maintained
-F: arch/arm/boot/dts/*omap*
-F: arch/arm/boot/dts/*am3*
-F: arch/arm/boot/dts/*am4*
-F: arch/arm/boot/dts/*am5*
-F: arch/arm/boot/dts/*dra7*
-
-OMAP CLOCK FRAMEWORK SUPPORT
-M: Paul Walmsley <paul@pwsan.com>
-L: linux-omap@vger.kernel.org
-S: Maintained
-F: arch/arm/*omap*/*clock*
-
-OMAP POWER MANAGEMENT SUPPORT
-M: Kevin Hilman <khilman@kernel.org>
-L: linux-omap@vger.kernel.org
-S: Maintained
-F: arch/arm/*omap*/*pm*
-F: drivers/cpufreq/omap-cpufreq.c
-
-OMAP POWERDOMAIN SOC ADAPTATION LAYER SUPPORT
-M: Rajendra Nayak <rnayak@codeaurora.org>
-M: Paul Walmsley <paul@pwsan.com>
-L: linux-omap@vger.kernel.org
-S: Maintained
-F: arch/arm/mach-omap2/prm*
-
-OMAP AUDIO SUPPORT
-M: Peter Ujfalusi <peter.ujfalusi@ti.com>
-M: Jarkko Nikula <jarkko.nikula@bitmer.com>
-L: alsa-devel@alsa-project.org (moderated for non-subscribers)
-L: linux-omap@vger.kernel.org
-S: Maintained
-F: sound/soc/omap/
-
-OMAP GENERAL PURPOSE MEMORY CONTROLLER SUPPORT
-M: Roger Quadros <rogerq@ti.com>
-M: Tony Lindgren <tony@atomide.com>
-L: linux-omap@vger.kernel.org
-S: Maintained
-F: drivers/memory/omap-gpmc.c
-F: arch/arm/mach-omap2/*gpmc*
-
-OMAP FRAMEBUFFER SUPPORT
-M: Tomi Valkeinen <tomi.valkeinen@ti.com>
-L: linux-fbdev@vger.kernel.org
-L: linux-omap@vger.kernel.org
-S: Maintained
-F: drivers/video/fbdev/omap/
-
-OMAP DISPLAY SUBSYSTEM and FRAMEBUFFER SUPPORT (DSS2)
-M: Tomi Valkeinen <tomi.valkeinen@ti.com>
-L: linux-omap@vger.kernel.org
-L: linux-fbdev@vger.kernel.org
-S: Maintained
-F: drivers/video/fbdev/omap2/
-F: Documentation/arm/OMAP/DSS
-
-OMAP HARDWARE SPINLOCK SUPPORT
-M: Ohad Ben-Cohen <ohad@wizery.com>
-L: linux-omap@vger.kernel.org
-S: Maintained
-F: drivers/hwspinlock/omap_hwspinlock.c
-
-OMAP MMC SUPPORT
-M: Jarkko Lavinen <jarkko.lavinen@nokia.com>
-L: linux-omap@vger.kernel.org
-S: Maintained
-F: drivers/mmc/host/omap.c
-
-OMAP HS MMC SUPPORT
-L: linux-mmc@vger.kernel.org
-L: linux-omap@vger.kernel.org
-S: Orphan
-F: drivers/mmc/host/omap_hsmmc.c
-
-OMAP RANDOM NUMBER GENERATOR SUPPORT
-M: Deepak Saxena <dsaxena@plexity.net>
-S: Maintained
-F: drivers/char/hw_random/omap-rng.c
-
-OMAP HWMOD SUPPORT
-M: Benoît Cousson <bcousson@baylibre.com>
-M: Paul Walmsley <paul@pwsan.com>
-L: linux-omap@vger.kernel.org
-S: Maintained
-F: arch/arm/mach-omap2/omap_hwmod.*
-
-OMAP HWMOD DATA
-M: Paul Walmsley <paul@pwsan.com>
-L: linux-omap@vger.kernel.org
-S: Maintained
-F: arch/arm/mach-omap2/omap_hwmod*data*
-
-OMAP HWMOD DATA FOR OMAP4-BASED DEVICES
-M: Benoît Cousson <bcousson@baylibre.com>
-L: linux-omap@vger.kernel.org
-S: Maintained
-F: arch/arm/mach-omap2/omap_hwmod_44xx_data.c
-
-OMAP IMAGING SUBSYSTEM (OMAP3 ISP and OMAP4 ISS)
-M: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-L: linux-media@vger.kernel.org
-S: Maintained
-F: Documentation/devicetree/bindings/media/ti,omap3isp.txt
-F: drivers/media/platform/omap3isp/
-F: drivers/staging/media/omap4iss/
-
-OMAP USB SUPPORT
-L: linux-usb@vger.kernel.org
-L: linux-omap@vger.kernel.org
-S: Orphan
-F: drivers/usb/*/*omap*
-F: arch/arm/*omap*/usb*
-
-OMAP GPIO DRIVER
-M: Grygorii Strashko <grygorii.strashko@ti.com>
-M: Santosh Shilimkar <ssantosh@kernel.org>
-M: Kevin Hilman <khilman@kernel.org>
-L: linux-omap@vger.kernel.org
-S: Maintained
-F: Documentation/devicetree/bindings/gpio/gpio-omap.txt
-F: drivers/gpio/gpio-omap.c
-
-OMAP/NEWFLOW NANOBONE MACHINE SUPPORT
-M: Mark Jackson <mpfj@newflow.co.uk>
-L: linux-omap@vger.kernel.org
-S: Maintained
-F: arch/arm/boot/dts/am335x-nano.dts
-
OMFS FILESYSTEM
M: Bob Copeland <me@bobcopeland.com>
L: linux-karma-devel@lists.sourceforge.net
@@ -9658,6 +9684,13 @@
S: Maintained
F: drivers/char/pcmcia/cm4040_cs.*
+OMNIVISION OV13858 SENSOR DRIVER
+M: Sakari Ailus <sakari.ailus@linux.intel.com>
+L: linux-media@vger.kernel.org
+T: git git://linuxtv.org/media_tree.git
+S: Maintained
+F: drivers/media/i2c/ov13858.c
+
OMNIVISION OV5640 SENSOR DRIVER
M: Steve Longerbeam <slongerbeam@gmail.com>
L: linux-media@vger.kernel.org
@@ -9680,13 +9713,6 @@
F: drivers/media/i2c/ov7670.c
F: Documentation/devicetree/bindings/media/i2c/ov7670.txt
-OMNIVISION OV13858 SENSOR DRIVER
-M: Sakari Ailus <sakari.ailus@linux.intel.com>
-L: linux-media@vger.kernel.org
-T: git git://linuxtv.org/media_tree.git
-S: Maintained
-F: drivers/media/i2c/ov13858.c
-
ONENAND FLASH DRIVER
M: Kyungmin Park <kyungmin.park@samsung.com>
L: linux-mtd@lists.infradead.org
@@ -9704,12 +9730,26 @@
F: drivers/scsi/osst_*.h
F: drivers/scsi/st.h
-OPENCORES I2C BUS DRIVER
-M: Peter Korsgaard <jacmet@sunsite.dk>
-L: linux-i2c@vger.kernel.org
+OP-TEE DRIVER
+M: Jens Wiklander <jens.wiklander@linaro.org>
S: Maintained
-F: Documentation/i2c/busses/i2c-ocores
-F: drivers/i2c/busses/i2c-ocores.c
+F: drivers/tee/optee/
+
+OPA-VNIC DRIVER
+M: Dennis Dalessandro <dennis.dalessandro@intel.com>
+M: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
+L: linux-rdma@vger.kernel.org
+S: Supported
+F: drivers/infiniband/ulp/opa_vnic
+
+OPEN FIRMWARE AND DEVICE TREE OVERLAYS
+M: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
+L: devicetree@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/dynamic-resolution-notes.txt
+F: Documentation/devicetree/overlay-notes.txt
+F: drivers/of/overlay.c
+F: drivers/of/resolver.c
OPEN FIRMWARE AND FLATTENED DEVICE TREE
M: Rob Herring <robh+dt@kernel.org>
@@ -9734,14 +9774,12 @@
F: arch/*/boot/dts/
F: include/dt-bindings/
-OPEN FIRMWARE AND DEVICE TREE OVERLAYS
-M: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
-L: devicetree@vger.kernel.org
+OPENCORES I2C BUS DRIVER
+M: Peter Korsgaard <jacmet@sunsite.dk>
+L: linux-i2c@vger.kernel.org
S: Maintained
-F: Documentation/devicetree/dynamic-resolution-notes.txt
-F: Documentation/devicetree/overlay-notes.txt
-F: drivers/of/overlay.c
-F: drivers/of/resolver.c
+F: Documentation/i2c/busses/i2c-ocores
+F: drivers/i2c/busses/i2c-ocores.c
OPENRISC ARCHITECTURE
M: Jonas Bonn <jonas@southpole.se>
@@ -9790,11 +9828,6 @@
F: drivers/oprofile/
F: include/linux/oprofile.h
-OP-TEE DRIVER
-M: Jens Wiklander <jens.wiklander@linaro.org>
-S: Maintained
-F: drivers/tee/optee/
-
ORACLE CLUSTER FILESYSTEM 2 (OCFS2)
M: Mark Fasheh <mfasheh@versity.com>
M: Joel Becker <jlbec@evilplan.org>
@@ -9805,6 +9838,14 @@
F: Documentation/filesystems/dlmfs.txt
F: fs/ocfs2/
+ORANGEFS FILESYSTEM
+M: Mike Marshall <hubcap@omnibond.com>
+L: pvfs2-developers@beowulf-underground.org (subscribers-only)
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux.git
+S: Supported
+F: fs/orangefs/
+F: Documentation/filesystems/orangefs.txt
+
ORINOCO DRIVER
L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/en/users/Drivers/orinoco
@@ -9819,6 +9860,16 @@
F: include/scsi/osd_*
F: fs/exofs/
+OV2659 OMNIVISION SENSOR DRIVER
+M: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
+L: linux-media@vger.kernel.org
+W: https://linuxtv.org
+Q: http://patchwork.linuxtv.org/project/linux-media/list/
+T: git git://linuxtv.org/mhadli/v4l-dvb-davinci_devices.git
+S: Maintained
+F: drivers/media/i2c/ov2659.c
+F: include/media/i2c/ov2659.h
+
OVERLAY FILESYSTEM
M: Miklos Szeredi <miklos@szeredi.hu>
L: linux-unionfs@vger.kernel.org
@@ -9827,14 +9878,6 @@
F: fs/overlayfs/
F: Documentation/filesystems/overlayfs.txt
-ORANGEFS FILESYSTEM
-M: Mike Marshall <hubcap@omnibond.com>
-L: pvfs2-developers@beowulf-underground.org (subscribers-only)
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux.git
-S: Supported
-F: fs/orangefs/
-F: Documentation/filesystems/orangefs.txt
-
P54 WIRELESS DRIVER
M: Christian Lamparter <chunkeey@googlemail.com>
L: linux-wireless@vger.kernel.org
@@ -9875,11 +9918,11 @@
F: arch/mn10300/
PARALLEL LCD/KEYPAD PANEL DRIVER
-M: Willy Tarreau <willy@haproxy.com>
-M: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
-S: Odd Fixes
-F: Documentation/misc-devices/lcd-panel-cgram.txt
-F: drivers/misc/panel.c
+M: Willy Tarreau <willy@haproxy.com>
+M: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
+S: Odd Fixes
+F: Documentation/misc-devices/lcd-panel-cgram.txt
+F: drivers/misc/panel.c
PARALLEL PORT SUBSYSTEM
M: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
@@ -9975,42 +10018,13 @@
S: Maintained
F: drivers/firmware/pcdp.*
-PCI ERROR RECOVERY
-M: Linas Vepstas <linasvepstas@gmail.com>
+PCI DRIVER FOR AARDVARK (Marvell Armada 3700)
+M: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
L: linux-pci@vger.kernel.org
-S: Supported
-F: Documentation/PCI/pci-error-recovery.txt
-
-PCI ENHANCED ERROR HANDLING (EEH) FOR POWERPC
-M: Russell Currey <ruscur@russell.cc>
-L: linuxppc-dev@lists.ozlabs.org
-S: Supported
-F: Documentation/powerpc/eeh-pci-error-recovery.txt
-F: arch/powerpc/kernel/eeh*.c
-F: arch/powerpc/platforms/*/eeh*.c
-F: arch/powerpc/include/*/eeh*.h
-
-PCI SUBSYSTEM
-M: Bjorn Helgaas <bhelgaas@google.com>
-L: linux-pci@vger.kernel.org
-Q: http://patchwork.ozlabs.org/project/linux-pci/list/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git
-S: Supported
-F: Documentation/devicetree/bindings/pci/
-F: Documentation/PCI/
-F: drivers/pci/
-F: include/linux/pci*
-F: arch/x86/pci/
-F: arch/x86/kernel/quirks.c
-
-PCI ENDPOINT SUBSYSTEM
-M: Kishon Vijay Abraham I <kishon@ti.com>
-L: linux-pci@vger.kernel.org
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/kishon/pci-endpoint.git
-S: Supported
-F: drivers/pci/endpoint/
-F: drivers/misc/pci_endpoint_test.c
-F: tools/pci/
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: Documentation/devicetree/bindings/pci/aardvark-pci.txt
+F: drivers/pci/host/pci-aardvark.c
PCI DRIVER FOR ALTERA PCIE IP
M: Ley Foon Tan <lftan@altera.com>
@@ -10020,6 +10034,14 @@
F: Documentation/devicetree/bindings/pci/altera-pcie.txt
F: drivers/pci/host/pcie-altera.c
+PCI DRIVER FOR APPLIEDMICRO XGENE
+M: Tanmay Inamdar <tinamdar@apm.com>
+L: linux-pci@vger.kernel.org
+L: linux-arm-kernel@lists.infradead.org
+S: Maintained
+F: Documentation/devicetree/bindings/pci/xgene-pci.txt
+F: drivers/pci/host/pci-xgene.c
+
PCI DRIVER FOR ARM VERSATILE PLATFORM
M: Rob Herring <robh@kernel.org>
L: linux-pci@vger.kernel.org
@@ -10036,14 +10058,6 @@
F: Documentation/devicetree/bindings/pci/pci-armada8k.txt
F: drivers/pci/dwc/pcie-armada8k.c
-PCI DRIVER FOR APPLIEDMICRO XGENE
-M: Tanmay Inamdar <tinamdar@apm.com>
-L: linux-pci@vger.kernel.org
-L: linux-arm-kernel@lists.infradead.org
-S: Maintained
-F: Documentation/devicetree/bindings/pci/xgene-pci.txt
-F: drivers/pci/host/pci-xgene.c
-
PCI DRIVER FOR FREESCALE LAYERSCAPE
M: Minghuan Lian <minghuan.Lian@freescale.com>
M: Mingkai Hu <mingkai.hu@freescale.com>
@@ -10054,6 +10068,15 @@
S: Maintained
F: drivers/pci/dwc/*layerscape*
+PCI DRIVER FOR GENERIC OF HOSTS
+M: Will Deacon <will.deacon@arm.com>
+L: linux-pci@vger.kernel.org
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: Documentation/devicetree/bindings/pci/host-generic-pci.txt
+F: drivers/pci/host/pci-host-common.c
+F: drivers/pci/host/pci-host-generic.c
+
PCI DRIVER FOR IMX6
M: Richard Zhu <hongxing.zhu@nxp.com>
M: Lucas Stach <l.stach@pengutronix.de>
@@ -10063,28 +10086,11 @@
F: Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
F: drivers/pci/dwc/*imx6*
-PCI DRIVER FOR TI KEYSTONE
-M: Murali Karicheri <m-karicheri2@ti.com>
+PCI DRIVER FOR INTEL VOLUME MANAGEMENT DEVICE (VMD)
+M: Keith Busch <keith.busch@intel.com>
L: linux-pci@vger.kernel.org
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-F: drivers/pci/dwc/*keystone*
-
-PCI DRIVER FOR MVEBU (Marvell Armada 370 and Armada XP SOC support)
-M: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-M: Jason Cooper <jason@lakedaemon.net>
-L: linux-pci@vger.kernel.org
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-F: drivers/pci/host/*mvebu*
-
-PCI DRIVER FOR AARDVARK (Marvell Armada 3700)
-M: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-L: linux-pci@vger.kernel.org
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-F: Documentation/devicetree/bindings/pci/aardvark-pci.txt
-F: drivers/pci/host/pci-aardvark.c
+S: Supported
+F: drivers/pci/host/vmd.c
PCI DRIVER FOR MICROSEMI SWITCHTEC
M: Kurt Schwemmer <kurt.schwemmer@microsemi.com>
@@ -10097,6 +10103,14 @@
F: drivers/pci/switch/switchtec*
F: include/uapi/linux/switchtec_ioctl.h
+PCI DRIVER FOR MVEBU (Marvell Armada 370 and Armada XP SOC support)
+M: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+M: Jason Cooper <jason@lakedaemon.net>
+L: linux-pci@vger.kernel.org
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: drivers/pci/host/*mvebu*
+
PCI DRIVER FOR NVIDIA TEGRA
M: Thierry Reding <thierry.reding@gmail.com>
L: linux-tegra@vger.kernel.org
@@ -10105,14 +10119,6 @@
F: Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
F: drivers/pci/host/pci-tegra.c
-PCI DRIVER FOR TI DRA7XX
-M: Kishon Vijay Abraham I <kishon@ti.com>
-L: linux-omap@vger.kernel.org
-L: linux-pci@vger.kernel.org
-S: Supported
-F: Documentation/devicetree/bindings/pci/ti-pci.txt
-F: drivers/pci/dwc/pci-dra7xx.c
-
PCI DRIVER FOR RENESAS R-CAR
M: Simon Horman <horms@verge.net.au>
L: linux-pci@vger.kernel.org
@@ -10136,26 +10142,44 @@
F: Documentation/devicetree/bindings/pci/designware-pcie.txt
F: drivers/pci/dwc/*designware*
-PCI DRIVER FOR GENERIC OF HOSTS
-M: Will Deacon <will.deacon@arm.com>
+PCI DRIVER FOR TI DRA7XX
+M: Kishon Vijay Abraham I <kishon@ti.com>
+L: linux-omap@vger.kernel.org
+L: linux-pci@vger.kernel.org
+S: Supported
+F: Documentation/devicetree/bindings/pci/ti-pci.txt
+F: drivers/pci/dwc/pci-dra7xx.c
+
+PCI DRIVER FOR TI KEYSTONE
+M: Murali Karicheri <m-karicheri2@ti.com>
L: linux-pci@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
-F: Documentation/devicetree/bindings/pci/host-generic-pci.txt
-F: drivers/pci/host/pci-host-common.c
-F: drivers/pci/host/pci-host-generic.c
+F: drivers/pci/dwc/*keystone*
-PCI DRIVER FOR INTEL VOLUME MANAGEMENT DEVICE (VMD)
-M: Keith Busch <keith.busch@intel.com>
+PCI ENDPOINT SUBSYSTEM
+M: Kishon Vijay Abraham I <kishon@ti.com>
+L: linux-pci@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/kishon/pci-endpoint.git
+S: Supported
+F: drivers/pci/endpoint/
+F: drivers/misc/pci_endpoint_test.c
+F: tools/pci/
+
+PCI ENHANCED ERROR HANDLING (EEH) FOR POWERPC
+M: Russell Currey <ruscur@russell.cc>
+L: linuxppc-dev@lists.ozlabs.org
+S: Supported
+F: Documentation/powerpc/eeh-pci-error-recovery.txt
+F: arch/powerpc/kernel/eeh*.c
+F: arch/powerpc/platforms/*/eeh*.c
+F: arch/powerpc/include/*/eeh*.h
+
+PCI ERROR RECOVERY
+M: Linas Vepstas <linasvepstas@gmail.com>
L: linux-pci@vger.kernel.org
S: Supported
-F: drivers/pci/host/vmd.c
-
-PCIE DRIVER FOR ST SPEAR13XX
-M: Pratyush Anand <pratyush.anand@gmail.com>
-L: linux-pci@vger.kernel.org
-S: Maintained
-F: drivers/pci/dwc/*spear*
+F: Documentation/PCI/pci-error-recovery.txt
PCI MSI DRIVER FOR ALTERA MSI IP
M: Ley Foon Tan <lftan@altera.com>
@@ -10173,6 +10197,19 @@
F: Documentation/devicetree/bindings/pci/xgene-pci-msi.txt
F: drivers/pci/host/pci-xgene-msi.c
+PCI SUBSYSTEM
+M: Bjorn Helgaas <bhelgaas@google.com>
+L: linux-pci@vger.kernel.org
+Q: http://patchwork.ozlabs.org/project/linux-pci/list/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git
+S: Supported
+F: Documentation/devicetree/bindings/pci/
+F: Documentation/PCI/
+F: drivers/pci/
+F: include/linux/pci*
+F: arch/x86/pci/
+F: arch/x86/kernel/quirks.c
+
PCIE DRIVER FOR AXIS ARTPEC
M: Niklas Cassel <niklas.cassel@axis.com>
M: Jesper Nilsson <jesper.nilsson@axis.com>
@@ -10182,6 +10219,14 @@
F: Documentation/devicetree/bindings/pci/axis,artpec*
F: drivers/pci/dwc/*artpec*
+PCIE DRIVER FOR CAVIUM THUNDERX
+M: David Daney <david.daney@cavium.com>
+L: linux-pci@vger.kernel.org
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Supported
+F: Documentation/devicetree/bindings/pci/pci-thunder-*
+F: drivers/pci/host/pci-thunder-*
+
PCIE DRIVER FOR HISILICON
M: Zhou Wang <wangzhou1@hisilicon.com>
M: Gabriele Paoloni <gabriele.paoloni@huawei.com>
@@ -10198,6 +10243,21 @@
F: Documentation/devicetree/bindings/pci/pcie-kirin.txt
F: drivers/pci/dwc/pcie-kirin.c
+PCIE DRIVER FOR MEDIATEK
+M: Ryder Lee <ryder.lee@mediatek.com>
+L: linux-pci@vger.kernel.org
+L: linux-mediatek@lists.infradead.org
+S: Supported
+F: Documentation/devicetree/bindings/pci/mediatek*
+F: drivers/pci/host/*mediatek*
+
+PCIE DRIVER FOR QUALCOMM MSM
+M: Stanimir Varbanov <svarbanov@mm-sol.com>
+L: linux-pci@vger.kernel.org
+L: linux-arm-msm@vger.kernel.org
+S: Maintained
+F: drivers/pci/dwc/*qcom*
+
PCIE DRIVER FOR ROCKCHIP
M: Shawn Lin <shawn.lin@rock-chips.com>
L: linux-pci@vger.kernel.org
@@ -10206,28 +10266,11 @@
F: Documentation/devicetree/bindings/pci/rockchip-pcie.txt
F: drivers/pci/host/pcie-rockchip.c
-PCIE DRIVER FOR QUALCOMM MSM
-M: Stanimir Varbanov <svarbanov@mm-sol.com>
-L: linux-pci@vger.kernel.org
-L: linux-arm-msm@vger.kernel.org
-S: Maintained
-F: drivers/pci/dwc/*qcom*
-
-PCIE DRIVER FOR CAVIUM THUNDERX
-M: David Daney <david.daney@cavium.com>
+PCIE DRIVER FOR ST SPEAR13XX
+M: Pratyush Anand <pratyush.anand@gmail.com>
L: linux-pci@vger.kernel.org
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Supported
-F: Documentation/devicetree/bindings/pci/pci-thunder-*
-F: drivers/pci/host/pci-thunder-*
-
-PCIE DRIVER FOR MEDIATEK
-M: Ryder Lee <ryder.lee@mediatek.com>
-L: linux-pci@vger.kernel.org
-L: linux-mediatek@lists.infradead.org
-S: Supported
-F: Documentation/devicetree/bindings/pci/mediatek*
-F: drivers/pci/host/*mediatek*
+S: Maintained
+F: drivers/pci/dwc/*spear*
PCMCIA SUBSYSTEM
P: Linux PCMCIA Team
@@ -10396,14 +10439,14 @@
F: drivers/pinctrl/spear/
PISTACHIO SOC SUPPORT
-M: James Hartley <james.hartley@imgtec.com>
-M: Ionela Voinescu <ionela.voinescu@imgtec.com>
-L: linux-mips@linux-mips.org
-S: Maintained
-F: arch/mips/pistachio/
-F: arch/mips/include/asm/mach-pistachio/
-F: arch/mips/boot/dts/img/pistachio*
-F: arch/mips/configs/pistachio*_defconfig
+M: James Hartley <james.hartley@imgtec.com>
+M: Ionela Voinescu <ionela.voinescu@imgtec.com>
+L: linux-mips@linux-mips.org
+S: Maintained
+F: arch/mips/pistachio/
+F: arch/mips/include/asm/mach-pistachio/
+F: arch/mips/boot/dts/img/pistachio*
+F: arch/mips/configs/pistachio*_defconfig
PKTCDVD DRIVER
S: Orphan
@@ -10446,6 +10489,11 @@
S: Supported
F: drivers/scsi/pm8001/
+PNP SUPPORT
+M: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
+S: Maintained
+F: drivers/pnp/
+
POSIX CLOCKS and TIMERS
M: Thomas Gleixner <tglx@linutronix.de>
L: linux-kernel@vger.kernel.org
@@ -10467,15 +10515,6 @@
F: include/linux/powercap.h
F: drivers/powercap/
-POWER SUPPLY CLASS/SUBSYSTEM and DRIVERS
-M: Sebastian Reichel <sre@kernel.org>
-L: linux-pm@vger.kernel.org
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply.git
-S: Maintained
-F: Documentation/devicetree/bindings/power/supply/
-F: include/linux/power_supply.h
-F: drivers/power/supply/
-
POWER STATE COORDINATION INTERFACE (PSCI)
M: Mark Rutland <mark.rutland@arm.com>
M: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
@@ -10485,23 +10524,21 @@
F: include/linux/psci.h
F: include/uapi/linux/psci.h
+POWER SUPPLY CLASS/SUBSYSTEM and DRIVERS
+M: Sebastian Reichel <sre@kernel.org>
+L: linux-pm@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply.git
+S: Maintained
+F: Documentation/devicetree/bindings/power/supply/
+F: include/linux/power_supply.h
+F: drivers/power/supply/
+
POWERNV OPERATOR PANEL LCD DISPLAY DRIVER
M: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
L: linuxppc-dev@lists.ozlabs.org
S: Maintained
F: drivers/char/powernv-op-panel.c
-PNP SUPPORT
-M: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
-S: Maintained
-F: drivers/pnp/
-
-PPP PROTOCOL DRIVERS AND COMPRESSORS
-M: Paul Mackerras <paulus@samba.org>
-L: linux-ppp@vger.kernel.org
-S: Maintained
-F: drivers/net/ppp/ppp_*
-
PPP OVER ATM (RFC 2364)
M: Mitchell Blank Jr <mitch@sfgoth.com>
S: Maintained
@@ -10521,6 +10558,12 @@
F: include/linux/if_pppol2tp.h
F: include/uapi/linux/if_pppol2tp.h
+PPP PROTOCOL DRIVERS AND COMPRESSORS
+M: Paul Mackerras <paulus@samba.org>
+L: linux-ppp@vger.kernel.org
+S: Maintained
+F: drivers/net/ppp/ppp_*
+
PPS SUPPORT
M: Rodolfo Giometti <giometti@enneenne.com>
W: http://wiki.enneenne.com/index.php/LinuxPPS_support
@@ -10634,7 +10677,6 @@
F: include/linux/ptp_cl*
PTRACE SUPPORT
-M: Roland McGrath <roland@hack.frob.com>
M: Oleg Nesterov <oleg@redhat.com>
S: Maintained
F: include/asm-generic/syscall.h
@@ -10642,7 +10684,12 @@
F: include/linux/regset.h
F: include/linux/tracehook.h
F: include/uapi/linux/ptrace.h
+F: include/uapi/linux/ptrace.h
+F: include/asm-generic/ptrace.h
F: kernel/ptrace.c
+F: arch/*/ptrace*.c
+F: arch/*/*/ptrace*.c
+F: arch/*/include/asm/ptrace*.h
PULSE8-CEC DRIVER
M: Hans Verkuil <hverkuil@xs4all.nl>
@@ -10691,6 +10738,20 @@
F: drivers/gpio/gpio-mvebu.c
F: Documentation/devicetree/bindings/gpio/gpio-mvebu.txt
+PXA GPIO DRIVER
+M: Robert Jarzmik <robert.jarzmik@free.fr>
+L: linux-gpio@vger.kernel.org
+S: Maintained
+F: drivers/gpio/gpio-pxa.c
+
+PXA MMCI DRIVER
+S: Orphan
+
+PXA RTC DRIVER
+M: Robert Jarzmik <robert.jarzmik@free.fr>
+L: linux-rtc@vger.kernel.org
+S: Maintained
+
PXA2xx/PXA3xx SUPPORT
M: Daniel Mack <daniel@zonque.org>
M: Haojian Zhuang <haojian.zhuang@gmail.com>
@@ -10710,36 +10771,12 @@
F: sound/arm/pxa*
F: sound/soc/pxa/
-PXA GPIO DRIVER
-M: Robert Jarzmik <robert.jarzmik@free.fr>
-L: linux-gpio@vger.kernel.org
-S: Maintained
-F: drivers/gpio/gpio-pxa.c
-
PXA3xx NAND FLASH DRIVER
M: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
L: linux-mtd@lists.infradead.org
S: Maintained
F: drivers/mtd/nand/pxa3xx_nand.c
-MMP SUPPORT
-M: Eric Miao <eric.y.miao@gmail.com>
-M: Haojian Zhuang <haojian.zhuang@gmail.com>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-T: git git://github.com/hzhuang1/linux.git
-T: git git://git.linaro.org/people/ycmiao/pxa-linux.git
-S: Maintained
-F: arch/arm/boot/dts/mmp*
-F: arch/arm/mach-mmp/
-
-PXA MMCI DRIVER
-S: Orphan
-
-PXA RTC DRIVER
-M: Robert Jarzmik <robert.jarzmik@free.fr>
-L: linux-rtc@vger.kernel.org
-S: Maintained
-
QAT DRIVER
M: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
M: Salvatore Benedetto <salvatore.benedetto@intel.com>
@@ -10747,12 +10784,56 @@
S: Supported
F: drivers/crypto/qat/
+QCOM AUDIO (ASoC) DRIVERS
+M: Patrick Lai <plai@codeaurora.org>
+M: Banajit Goswami <bgoswami@codeaurora.org>
+L: alsa-devel@alsa-project.org (moderated for non-subscribers)
+S: Supported
+F: sound/soc/qcom/
+
+QEMU MACHINE EMULATOR AND VIRTUALIZER SUPPORT
+M: Gabriel Somlo <somlo@cmu.edu>
+M: "Michael S. Tsirkin" <mst@redhat.com>
+L: qemu-devel@nongnu.org
+S: Maintained
+F: drivers/firmware/qemu_fw_cfg.c
+
QIB DRIVER
M: Mike Marciniszyn <infinipath@intel.com>
L: linux-rdma@vger.kernel.org
S: Supported
F: drivers/infiniband/hw/qib/
+QLOGIC QL41xxx FCOE DRIVER
+M: QLogic-Storage-Upstream@cavium.com
+L: linux-scsi@vger.kernel.org
+S: Supported
+F: drivers/scsi/qedf/
+
+QLOGIC QL41xxx ISCSI DRIVER
+M: QLogic-Storage-Upstream@cavium.com
+L: linux-scsi@vger.kernel.org
+S: Supported
+F: drivers/scsi/qedi/
+
+QLOGIC QL4xxx ETHERNET DRIVER
+M: Yuval Mintz <Yuval.Mintz@cavium.com>
+M: Ariel Elior <Ariel.Elior@cavium.com>
+M: everest-linux-l2@cavium.com
+L: netdev@vger.kernel.org
+S: Supported
+F: drivers/net/ethernet/qlogic/qed/
+F: include/linux/qed/
+F: drivers/net/ethernet/qlogic/qede/
+
+QLOGIC QL4xxx RDMA DRIVER
+M: Ram Amrani <Ram.Amrani@cavium.com>
+M: Ariel Elior <Ariel.Elior@cavium.com>
+L: linux-rdma@vger.kernel.org
+S: Supported
+F: drivers/infiniband/hw/qedr/
+F: include/uapi/rdma/qedr-abi.h
+
QLOGIC QLA1280 SCSI DRIVER
M: Michael Reed <mdr@sgi.com>
L: linux-scsi@vger.kernel.org
@@ -10766,13 +10847,6 @@
F: Documentation/scsi/LICENSE.qla2xxx
F: drivers/scsi/qla2xxx/
-QLOGIC QLA4XXX iSCSI DRIVER
-M: QLogic-Storage-Upstream@qlogic.com
-L: linux-scsi@vger.kernel.org
-S: Supported
-F: Documentation/scsi/LICENSE.qla4xxx
-F: drivers/scsi/qla4xxx/
-
QLOGIC QLA3XXX NETWORK DRIVER
M: Dept-GELinuxNICDev@cavium.com
L: netdev@vger.kernel.org
@@ -10780,6 +10854,13 @@
F: Documentation/networking/LICENSE.qla3xxx
F: drivers/net/ethernet/qlogic/qla3xxx.*
+QLOGIC QLA4XXX iSCSI DRIVER
+M: QLogic-Storage-Upstream@qlogic.com
+L: linux-scsi@vger.kernel.org
+S: Supported
+F: Documentation/scsi/LICENSE.qla4xxx
+F: drivers/scsi/qla4xxx/
+
QLOGIC QLCNIC (1/10)Gb ETHERNET DRIVER
M: Harish Patil <harish.patil@cavium.com>
M: Manish Chopra <manish.chopra@cavium.com>
@@ -10796,28 +10877,6 @@
S: Supported
F: drivers/net/ethernet/qlogic/qlge/
-QLOGIC QL4xxx ETHERNET DRIVER
-M: Yuval Mintz <Yuval.Mintz@cavium.com>
-M: Ariel Elior <Ariel.Elior@cavium.com>
-M: everest-linux-l2@cavium.com
-L: netdev@vger.kernel.org
-S: Supported
-F: drivers/net/ethernet/qlogic/qed/
-F: include/linux/qed/
-F: drivers/net/ethernet/qlogic/qede/
-
-QLOGIC QL41xxx ISCSI DRIVER
-M: QLogic-Storage-Upstream@cavium.com
-L: linux-scsi@vger.kernel.org
-S: Supported
-F: drivers/scsi/qedi/
-
-QLOGIC QL41xxx FCOE DRIVER
-M: QLogic-Storage-Upstream@cavium.com
-L: linux-scsi@vger.kernel.org
-S: Supported
-F: drivers/scsi/qedf/
-
QNX4 FILESYSTEM
M: Anders Larsen <al@alarsen.net>
W: http://www.alarsen.net/linux/qnx4fs/
@@ -10844,13 +10903,6 @@
S: Maintained
F: drivers/media/tuners/qt1010*
-QUALCOMM ATHEROS ATH9K WIRELESS DRIVER
-M: QCA ath9k Development <ath9k-devel@qca.qualcomm.com>
-L: linux-wireless@vger.kernel.org
-W: http://wireless.kernel.org/en/users/Drivers/ath9k
-S: Supported
-F: drivers/net/wireless/ath/ath9k/
-
QUALCOMM ATHEROS ATH10K WIRELESS DRIVER
M: Kalle Valo <kvalo@qca.qualcomm.com>
L: ath10k@lists.infradead.org
@@ -10859,6 +10911,13 @@
S: Supported
F: drivers/net/wireless/ath/ath10k/
+QUALCOMM ATHEROS ATH9K WIRELESS DRIVER
+M: QCA ath9k Development <ath9k-devel@qca.qualcomm.com>
+L: linux-wireless@vger.kernel.org
+W: http://wireless.kernel.org/en/users/Drivers/ath9k
+S: Supported
+F: drivers/net/wireless/ath/ath9k/
+
QUALCOMM EMAC GIGABIT ETHERNET DRIVER
M: Timur Tabi <timur@codeaurora.org>
L: netdev@vger.kernel.org
@@ -10888,33 +10947,24 @@
S: Supported
F: drivers/net/wireless/ath/wcn36xx/
-QEMU MACHINE EMULATOR AND VIRTUALIZER SUPPORT
-M: Gabriel Somlo <somlo@cmu.edu>
-M: "Michael S. Tsirkin" <mst@redhat.com>
-L: qemu-devel@nongnu.org
-S: Maintained
-F: drivers/firmware/qemu_fw_cfg.c
-
QUANTENNA QTNFMAC WIRELESS DRIVER
-M: Igor Mitsyanko <imitsyanko@quantenna.com>
-M: Avinash Patil <avinashp@quantenna.com>
-M: Sergey Matyukevich <smatyukevich@quantenna.com>
-L: linux-wireless@vger.kernel.org
-S: Maintained
-F: drivers/net/wireless/quantenna
+M: Igor Mitsyanko <imitsyanko@quantenna.com>
+M: Avinash Patil <avinashp@quantenna.com>
+M: Sergey Matyukevich <smatyukevich@quantenna.com>
+L: linux-wireless@vger.kernel.org
+S: Maintained
+F: drivers/net/wireless/quantenna
-RADOS BLOCK DEVICE (RBD)
-M: Ilya Dryomov <idryomov@gmail.com>
-M: Sage Weil <sage@redhat.com>
-M: Alex Elder <elder@kernel.org>
-L: ceph-devel@vger.kernel.org
-W: http://ceph.com/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git
-T: git git://github.com/ceph/ceph-client.git
+RADEON and AMDGPU DRM DRIVERS
+M: Alex Deucher <alexander.deucher@amd.com>
+M: Christian König <christian.koenig@amd.com>
+L: amd-gfx@lists.freedesktop.org
+T: git git://people.freedesktop.org/~agd5f/linux
S: Supported
-F: Documentation/ABI/testing/sysfs-bus-rbd
-F: drivers/block/rbd.c
-F: drivers/block/rbd_types.h
+F: drivers/gpu/drm/radeon/
+F: include/uapi/drm/radeon_drm.h
+F: drivers/gpu/drm/amd/
+F: include/uapi/drm/amdgpu_drm.h
RADEON FRAMEBUFFER DISPLAY DRIVER
M: Benjamin Herrenschmidt <benh@kernel.crashing.org>
@@ -10938,6 +10988,19 @@
F: drivers/media/radio/radio-shark2.c
F: drivers/media/radio/radio-tea5777.c
+RADOS BLOCK DEVICE (RBD)
+M: Ilya Dryomov <idryomov@gmail.com>
+M: Sage Weil <sage@redhat.com>
+M: Alex Elder <elder@kernel.org>
+L: ceph-devel@vger.kernel.org
+W: http://ceph.com/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git
+T: git git://github.com/ceph/ceph-client.git
+S: Supported
+F: Documentation/ABI/testing/sysfs-bus-rbd
+F: drivers/block/rbd.c
+F: drivers/block/rbd_types.h
+
RAGE128 FRAMEBUFFER DISPLAY DRIVER
M: Paul Mackerras <paulus@samba.org>
L: linux-fbdev@vger.kernel.org
@@ -11017,6 +11080,12 @@
S: Maintained
F: drivers/net/ethernet/rdc/r6040.c
+RDMAVT - RDMA verbs software
+M: Dennis Dalessandro <dennis.dalessandro@intel.com>
+L: linux-rdma@vger.kernel.org
+S: Supported
+F: drivers/infiniband/sw/rdmavt
+
RDS - RELIABLE DATAGRAM SOCKETS
M: Santosh Shilimkar <santosh.shilimkar@oracle.com>
L: netdev@vger.kernel.org
@@ -11027,12 +11096,6 @@
F: net/rds/
F: Documentation/networking/rds.txt
-RDMAVT - RDMA verbs software
-M: Dennis Dalessandro <dennis.dalessandro@intel.com>
-L: linux-rdma@vger.kernel.org
-S: Supported
-F: drivers/infiniband/sw/rdmavt
-
RDT - RESOURCE ALLOCATION
M: Fenghua Yu <fenghua.yu@intel.com>
L: linux-kernel@vger.kernel.org
@@ -11081,11 +11144,6 @@
F: sound/soc/codecs/rt*
F: include/sound/rt*.h
-REISERFS FILE SYSTEM
-L: reiserfs-devel@vger.kernel.org
-S: Supported
-F: fs/reiserfs/
-
REGISTER MAP ABSTRACTION
M: Mark Brown <broonie@kernel.org>
L: linux-kernel@vger.kernel.org
@@ -11095,6 +11153,11 @@
F: drivers/base/regmap/
F: include/linux/regmap.h
+REISERFS FILE SYSTEM
+L: reiserfs-devel@vger.kernel.org
+S: Supported
+F: fs/reiserfs/
+
REMOTE PROCESSOR (REMOTEPROC) SUBSYSTEM
M: Ohad Ben-Cohen <ohad@wizery.com>
M: Bjorn Andersson <bjorn.andersson@linaro.org>
@@ -11170,17 +11233,17 @@
F: lib/rhashtable.c
F: include/linux/rhashtable.h
+RICOH R5C592 MEMORYSTICK DRIVER
+M: Maxim Levitsky <maximlevitsky@gmail.com>
+S: Maintained
+F: drivers/memstick/host/r592.*
+
RICOH SMARTMEDIA/XD DRIVER
M: Maxim Levitsky <maximlevitsky@gmail.com>
S: Maintained
F: drivers/mtd/nand/r852.c
F: drivers/mtd/nand/r852.h
-RICOH R5C592 MEMORYSTICK DRIVER
-M: Maxim Levitsky <maximlevitsky@gmail.com>
-S: Maintained
-F: drivers/memstick/host/r592.*
-
ROCCAT DRIVERS
M: Stefan Achatz <erazor_de@users.sourceforge.net>
W: http://sourceforge.net/projects/roccat/
@@ -11316,6 +11379,23 @@
F: drivers/s390/block/dasd*
F: block/partitions/ibm.c
+S390 IOMMU (PCI)
+M: Gerald Schaefer <gerald.schaefer@de.ibm.com>
+L: linux-s390@vger.kernel.org
+W: http://www.ibm.com/developerworks/linux/linux390/
+S: Supported
+F: drivers/iommu/s390-iommu.c
+
+S390 IUCV NETWORK LAYER
+M: Julian Wiedmann <jwi@linux.vnet.ibm.com>
+M: Ursula Braun <ubraun@linux.vnet.ibm.com>
+L: linux-s390@vger.kernel.org
+W: http://www.ibm.com/developerworks/linux/linux390/
+S: Supported
+F: drivers/s390/net/*iucv*
+F: include/net/iucv/
+F: net/iucv/
+
S390 NETWORK DRIVERS
M: Julian Wiedmann <jwi@linux.vnet.ibm.com>
M: Ursula Braun <ubraun@linux.vnet.ibm.com>
@@ -11333,37 +11413,6 @@
F: arch/s390/pci/
F: drivers/pci/hotplug/s390_pci_hpc.c
-S390 ZCRYPT DRIVER
-M: Harald Freudenberger <freude@de.ibm.com>
-L: linux-s390@vger.kernel.org
-W: http://www.ibm.com/developerworks/linux/linux390/
-S: Supported
-F: drivers/s390/crypto/
-
-S390 ZFCP DRIVER
-M: Steffen Maier <maier@linux.vnet.ibm.com>
-L: linux-s390@vger.kernel.org
-W: http://www.ibm.com/developerworks/linux/linux390/
-S: Supported
-F: drivers/s390/scsi/zfcp_*
-
-S390 IUCV NETWORK LAYER
-M: Julian Wiedmann <jwi@linux.vnet.ibm.com>
-M: Ursula Braun <ubraun@linux.vnet.ibm.com>
-L: linux-s390@vger.kernel.org
-W: http://www.ibm.com/developerworks/linux/linux390/
-S: Supported
-F: drivers/s390/net/*iucv*
-F: include/net/iucv/
-F: net/iucv/
-
-S390 IOMMU (PCI)
-M: Gerald Schaefer <gerald.schaefer@de.ibm.com>
-L: linux-s390@vger.kernel.org
-W: http://www.ibm.com/developerworks/linux/linux390/
-S: Supported
-F: drivers/iommu/s390-iommu.c
-
S390 VFIO-CCW DRIVER
M: Cornelia Huck <cohuck@redhat.com>
M: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
@@ -11374,6 +11423,21 @@
F: Documentation/s390/vfio-ccw.txt
F: include/uapi/linux/vfio_ccw.h
+S390 ZCRYPT DRIVER
+M: Harald Freudenberger <freude@de.ibm.com>
+L: linux-s390@vger.kernel.org
+W: http://www.ibm.com/developerworks/linux/linux390/
+S: Supported
+F: drivers/s390/crypto/
+
+S390 ZFCP DRIVER
+M: Steffen Maier <maier@linux.vnet.ibm.com>
+M: Benjamin Block <bblock@linux.vnet.ibm.com>
+L: linux-s390@vger.kernel.org
+W: http://www.ibm.com/developerworks/linux/linux390/
+S: Supported
+F: drivers/s390/scsi/zfcp_*
+
S3C24XX SD/MMC Driver
M: Ben Dooks <ben-linux@fluff.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -11407,12 +11471,6 @@
F: drivers/media/pci/saa7146/
F: include/media/saa7146*
-SAMSUNG LAPTOP DRIVER
-M: Corentin Chary <corentin.chary@gmail.com>
-L: platform-driver-x86@vger.kernel.org
-S: Maintained
-F: drivers/platform/x86/samsung-laptop.c
-
SAMSUNG AUDIO (ASoC) DRIVERS
M: Krzysztof Kozlowski <krzk@kernel.org>
M: Sangbeom Kim <sbkim73@samsung.com>
@@ -11435,6 +11493,12 @@
S: Maintained
F: drivers/video/fbdev/s3c-fb.c
+SAMSUNG LAPTOP DRIVER
+M: Corentin Chary <corentin.chary@gmail.com>
+L: platform-driver-x86@vger.kernel.org
+S: Maintained
+F: drivers/platform/x86/samsung-laptop.c
+
SAMSUNG MULTIFUNCTION PMIC DEVICE DRIVERS
M: Sangbeom Kim <sbkim73@samsung.com>
M: Krzysztof Kozlowski <krzk@kernel.org>
@@ -11453,22 +11517,6 @@
F: Documentation/devicetree/bindings/regulator/samsung,s5m*.txt
F: Documentation/devicetree/bindings/clock/samsung,s2mps11.txt
-SAMSUNG S5P Security SubSystem (SSS) DRIVER
-M: Krzysztof Kozlowski <krzk@kernel.org>
-M: Vladimir Zapolskiy <vz@mleia.com>
-L: linux-crypto@vger.kernel.org
-L: linux-samsung-soc@vger.kernel.org
-S: Maintained
-F: drivers/crypto/s5p-sss.c
-
-SAMSUNG S5P/EXYNOS4 SOC SERIES CAMERA SUBSYSTEM DRIVERS
-M: Kyungmin Park <kyungmin.park@samsung.com>
-M: Sylwester Nawrocki <s.nawrocki@samsung.com>
-L: linux-media@vger.kernel.org
-Q: https://patchwork.linuxtv.org/project/linux-media/list/
-S: Supported
-F: drivers/media/platform/exynos4-is/
-
SAMSUNG S3C24XX/S3C64XX SOC SERIES CAMIF DRIVER
M: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
L: linux-media@vger.kernel.org
@@ -11477,6 +11525,13 @@
F: drivers/media/platform/s3c-camif/
F: include/media/drv-intf/s3c_camif.h
+SAMSUNG S3FWRN5 NFC DRIVER
+M: Robert Baldyga <r.baldyga@samsung.com>
+M: Krzysztof Opasiak <k.opasiak@samsung.com>
+L: linux-nfc@lists.01.org (moderated for non-subscribers)
+S: Supported
+F: drivers/nfc/s3fwrn5
+
SAMSUNG S5C73M3 CAMERA DRIVER
M: Kyungmin Park <kyungmin.park@samsung.com>
M: Andrzej Hajda <a.hajda@samsung.com>
@@ -11491,12 +11546,21 @@
S: Supported
F: drivers/media/i2c/s5k5baf.c
-SAMSUNG S3FWRN5 NFC DRIVER
-M: Robert Baldyga <r.baldyga@samsung.com>
-M: Krzysztof Opasiak <k.opasiak@samsung.com>
-L: linux-nfc@lists.01.org (moderated for non-subscribers)
+SAMSUNG S5P Security SubSystem (SSS) DRIVER
+M: Krzysztof Kozlowski <krzk@kernel.org>
+M: Vladimir Zapolskiy <vz@mleia.com>
+L: linux-crypto@vger.kernel.org
+L: linux-samsung-soc@vger.kernel.org
+S: Maintained
+F: drivers/crypto/s5p-sss.c
+
+SAMSUNG S5P/EXYNOS4 SOC SERIES CAMERA SUBSYSTEM DRIVERS
+M: Kyungmin Park <kyungmin.park@samsung.com>
+M: Sylwester Nawrocki <s.nawrocki@samsung.com>
+L: linux-media@vger.kernel.org
+Q: https://patchwork.linuxtv.org/project/linux-media/list/
S: Supported
-F: drivers/nfc/s3fwrn5
+F: drivers/media/platform/exynos4-is/
SAMSUNG SOC CLOCK DRIVERS
M: Sylwester Nawrocki <s.nawrocki@samsung.com>
@@ -11549,126 +11613,6 @@
F: drivers/phy/samsung/phy-samsung-usb2.c
F: drivers/phy/samsung/phy-samsung-usb2.h
-SERIAL DRIVERS
-M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-L: linux-serial@vger.kernel.org
-S: Maintained
-F: Documentation/devicetree/bindings/serial/
-F: drivers/tty/serial/
-
-SERIAL DEVICE BUS
-M: Rob Herring <robh@kernel.org>
-L: linux-serial@vger.kernel.org
-S: Maintained
-F: Documentation/devicetree/bindings/serial/slave-device.txt
-F: drivers/tty/serdev/
-F: include/linux/serdev.h
-
-SERIAL IR RECEIVER
-M: Sean Young <sean@mess.org>
-L: linux-media@vger.kernel.org
-S: Maintained
-F: drivers/media/rc/serial_ir.c
-
-STI CEC DRIVER
-M: Benjamin Gaignard <benjamin.gaignard@linaro.org>
-S: Maintained
-F: drivers/staging/media/st-cec/
-F: Documentation/devicetree/bindings/media/stih-cec.txt
-
-SHARED MEMORY COMMUNICATIONS (SMC) SOCKETS
-M: Ursula Braun <ubraun@linux.vnet.ibm.com>
-L: linux-s390@vger.kernel.org
-W: http://www.ibm.com/developerworks/linux/linux390/
-S: Supported
-F: net/smc/
-
-SYNOPSYS DESIGNWARE DMAC DRIVER
-M: Viresh Kumar <vireshk@kernel.org>
-M: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-S: Maintained
-F: include/linux/dma/dw.h
-F: include/linux/platform_data/dma-dw.h
-F: drivers/dma/dw/
-
-SYNOPSYS DESIGNWARE ENTERPRISE ETHERNET DRIVER
-M: Jie Deng <jiedeng@synopsys.com>
-L: netdev@vger.kernel.org
-S: Supported
-F: drivers/net/ethernet/synopsys/
-
-SYNOPSYS DESIGNWARE I2C DRIVER
-M: Jarkko Nikula <jarkko.nikula@linux.intel.com>
-R: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-R: Mika Westerberg <mika.westerberg@linux.intel.com>
-L: linux-i2c@vger.kernel.org
-S: Maintained
-F: drivers/i2c/busses/i2c-designware-*
-F: include/linux/platform_data/i2c-designware.h
-
-SYNOPSYS DESIGNWARE MMC/SD/SDIO DRIVER
-M: Jaehoon Chung <jh80.chung@samsung.com>
-L: linux-mmc@vger.kernel.org
-S: Maintained
-F: drivers/mmc/host/dw_mmc*
-
-SYSTEM TRACE MODULE CLASS
-M: Alexander Shishkin <alexander.shishkin@linux.intel.com>
-S: Maintained
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/ash/stm.git
-F: Documentation/trace/stm.txt
-F: drivers/hwtracing/stm/
-F: include/linux/stm.h
-F: include/uapi/linux/stm.h
-
-TEE SUBSYSTEM
-M: Jens Wiklander <jens.wiklander@linaro.org>
-S: Maintained
-F: include/linux/tee_drv.h
-F: include/uapi/linux/tee.h
-F: drivers/tee/
-F: Documentation/tee.txt
-
-THUNDERBOLT DRIVER
-M: Andreas Noever <andreas.noever@gmail.com>
-M: Michael Jamet <michael.jamet@intel.com>
-M: Mika Westerberg <mika.westerberg@linux.intel.com>
-M: Yehezkel Bernat <yehezkel.bernat@intel.com>
-S: Maintained
-F: drivers/thunderbolt/
-
-TI BQ27XXX POWER SUPPLY DRIVER
-R: Andrew F. Davis <afd@ti.com>
-F: include/linux/power/bq27xxx_battery.h
-F: drivers/power/supply/bq27xxx_battery.c
-F: drivers/power/supply/bq27xxx_battery_i2c.c
-
-TIMEKEEPING, CLOCKSOURCE CORE, NTP, ALARMTIMER
-M: John Stultz <john.stultz@linaro.org>
-M: Thomas Gleixner <tglx@linutronix.de>
-R: Stephen Boyd <sboyd@codeaurora.org>
-L: linux-kernel@vger.kernel.org
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
-S: Supported
-F: include/linux/clocksource.h
-F: include/linux/time.h
-F: include/linux/timex.h
-F: include/uapi/linux/time.h
-F: include/uapi/linux/timex.h
-F: kernel/time/clocksource.c
-F: kernel/time/time*.c
-F: kernel/time/alarmtimer.c
-F: kernel/time/ntp.c
-F: tools/testing/selftests/timers/
-
-TI TRF7970A NFC DRIVER
-M: Mark Greer <mgreer@animalcreek.com>
-L: linux-wireless@vger.kernel.org
-L: linux-nfc@lists.01.org (moderated for non-subscribers)
-S: Supported
-F: drivers/nfc/trf7970a.c
-F: Documentation/devicetree/bindings/net/nfc/trf7970a.txt
-
SC1200 WDT DRIVER
M: Zwane Mwaikambo <zwanem@gmail.com>
S: Maintained
@@ -11697,16 +11641,6 @@
S: Supported
F: drivers/char/pcmcia/scr24x_cs.c
-SYSTEM CONTROL & POWER INTERFACE (SCPI) Message Protocol drivers
-M: Sudeep Holla <sudeep.holla@arm.com>
-L: linux-arm-kernel@lists.infradead.org
-S: Maintained
-F: Documentation/devicetree/bindings/arm/arm,scpi.txt
-F: drivers/clk/clk-scpi.c
-F: drivers/cpufreq/scpi-cpufreq.c
-F: drivers/firmware/arm_scpi.c
-F: include/linux/scpi_protocol.h
-
SCSI CDROM DRIVER
M: Jens Axboe <axboe@kernel.dk>
L: linux-scsi@vger.kernel.org
@@ -11791,14 +11725,6 @@
S: Maintained
F: drivers/mmc/host/sdricoh_cs.c
-SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) DRIVER
-M: Adrian Hunter <adrian.hunter@intel.com>
-L: linux-mmc@vger.kernel.org
-T: git git://git.infradead.org/users/ahunter/linux-sdhci.git
-S: Maintained
-F: drivers/mmc/host/sdhci*
-F: include/linux/mmc/sdhci*
-
SECURE COMPUTING
M: Kees Cook <keescook@chromium.org>
R: Andy Lutomirski <luto@amacapital.net>
@@ -11821,6 +11747,14 @@
S: Maintained
F: drivers/mmc/host/sdhci-brcmstb*
+SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) DRIVER
+M: Adrian Hunter <adrian.hunter@intel.com>
+L: linux-mmc@vger.kernel.org
+T: git git://git.infradead.org/users/ahunter/linux-sdhci.git
+S: Maintained
+F: drivers/mmc/host/sdhci*
+F: include/linux/mmc/sdhci*
+
SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) SAMSUNG DRIVER
M: Ben Dooks <ben-linux@fluff.org>
M: Jaehoon Chung <jh80.chung@samsung.com>
@@ -11845,6 +11779,10 @@
F: include/linux/sed*
F: include/uapi/linux/sed*
+SECURITY CONTACT
+M: Security Officers <security@kernel.org>
+S: Supported
+
SECURITY SUBSYSTEM
M: James Morris <james.l.morris@oracle.com>
M: "Serge E. Hallyn" <serge@hallyn.com>
@@ -11854,10 +11792,6 @@
S: Supported
F: security/
-SECURITY CONTACT
-M: Security Officers <security@kernel.org>
-S: Supported
-
SELINUX SECURITY MODULE
M: Paul Moore <paul@paul-moore.com>
M: Stephen Smalley <sds@tycho.nsa.gov>
@@ -11871,62 +11805,32 @@
F: scripts/selinux/
F: Documentation/admin-guide/LSM/SELinux.rst
-APPARMOR SECURITY MODULE
-M: John Johansen <john.johansen@canonical.com>
-L: apparmor@lists.ubuntu.com (subscribers-only, general discussion)
-W: apparmor.wiki.kernel.org
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/jj/apparmor-dev.git
-S: Supported
-F: security/apparmor/
-F: Documentation/admin-guide/LSM/apparmor.rst
-
-LOADPIN SECURITY MODULE
-M: Kees Cook <keescook@chromium.org>
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git lsm/loadpin
-S: Supported
-F: security/loadpin/
-F: Documentation/admin-guide/LSM/LoadPin.rst
-
-YAMA SECURITY MODULE
-M: Kees Cook <keescook@chromium.org>
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git yama/tip
-S: Supported
-F: security/yama/
-F: Documentation/admin-guide/LSM/Yama.rst
-
SENSABLE PHANTOM
M: Jiri Slaby <jirislaby@gmail.com>
S: Maintained
F: drivers/misc/phantom.c
F: include/uapi/linux/phantom.h
-Emulex 10Gbps iSCSI - OneConnect DRIVER
-M: Subbu Seetharaman <subbu.seetharaman@broadcom.com>
-M: Ketan Mukadam <ketan.mukadam@broadcom.com>
-M: Jitendra Bhivare <jitendra.bhivare@broadcom.com>
-L: linux-scsi@vger.kernel.org
-W: http://www.broadcom.com
-S: Supported
-F: drivers/scsi/be2iscsi/
+SERIAL DEVICE BUS
+M: Rob Herring <robh@kernel.org>
+L: linux-serial@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/serial/slave-device.txt
+F: drivers/tty/serdev/
+F: include/linux/serdev.h
-Emulex 10Gbps NIC BE2, BE3-R, Lancer, Skyhawk-R DRIVER (be2net)
-M: Sathya Perla <sathya.perla@broadcom.com>
-M: Ajit Khaparde <ajit.khaparde@broadcom.com>
-M: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
-M: Somnath Kotur <somnath.kotur@broadcom.com>
-L: netdev@vger.kernel.org
-W: http://www.emulex.com
-S: Supported
-F: drivers/net/ethernet/emulex/benet/
+SERIAL DRIVERS
+M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+L: linux-serial@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/serial/
+F: drivers/tty/serial/
-EMULEX ONECONNECT ROCE DRIVER
-M: Selvin Xavier <selvin.xavier@broadcom.com>
-M: Devesh Sharma <devesh.sharma@broadcom.com>
-L: linux-rdma@vger.kernel.org
-W: http://www.broadcom.com
-S: Odd Fixes
-F: drivers/infiniband/hw/ocrdma/
-F: include/uapi/rdma/ocrdma-abi.h
+SERIAL IR RECEIVER
+M: Sean Young <sean@mess.org>
+L: linux-media@vger.kernel.org
+S: Maintained
+F: drivers/media/rc/serial_ir.c
SFC NETWORK DRIVER
M: Solarflare linux maintainers <linux-net-drivers@solarflare.com>
@@ -11955,6 +11859,24 @@
S: Maintained
F: drivers/misc/sgi-xp/
+SHARED MEMORY COMMUNICATIONS (SMC) SOCKETS
+M: Ursula Braun <ubraun@linux.vnet.ibm.com>
+L: linux-s390@vger.kernel.org
+W: http://www.ibm.com/developerworks/linux/linux390/
+S: Supported
+F: net/smc/
+
+SH_VEU V4L2 MEM2MEM DRIVER
+L: linux-media@vger.kernel.org
+S: Orphan
+F: drivers/media/platform/sh_veu.c
+
+SH_VOU V4L2 OUTPUT DRIVER
+L: linux-media@vger.kernel.org
+S: Orphan
+F: drivers/media/platform/sh_vou.c
+F: include/media/drv-intf/sh_vou.h
+
SI2157 MEDIA DRIVER
M: Antti Palosaari <crope@iki.fi>
L: linux-media@vger.kernel.org
@@ -12037,24 +11959,14 @@
F: drivers/input/touchscreen/silead.c
F: drivers/platform/x86/silead_dmi.c
-SIMPLEFB FB DRIVER
-M: Hans de Goede <hdegoede@redhat.com>
+SILICON MOTION SM712 FRAME BUFFER DRIVER
+M: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
+M: Teddy Wang <teddy.wang@siliconmotion.com>
+M: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
L: linux-fbdev@vger.kernel.org
S: Maintained
-F: Documentation/devicetree/bindings/display/simple-framebuffer.txt
-F: drivers/video/fbdev/simplefb.c
-F: include/linux/platform_data/simplefb.h
-
-SH_VEU V4L2 MEM2MEM DRIVER
-L: linux-media@vger.kernel.org
-S: Orphan
-F: drivers/media/platform/sh_veu.c
-
-SH_VOU V4L2 OUTPUT DRIVER
-L: linux-media@vger.kernel.org
-S: Orphan
-F: drivers/media/platform/sh_vou.c
-F: include/media/drv-intf/sh_vou.h
+F: drivers/video/fbdev/sm712*
+F: Documentation/fb/sm712fb.txt
SIMPLE FIRMWARE INTERFACE (SFI)
M: Len Brown <lenb@kernel.org>
@@ -12066,6 +11978,14 @@
F: drivers/sfi/
F: include/linux/sfi*.h
+SIMPLEFB FB DRIVER
+M: Hans de Goede <hdegoede@redhat.com>
+L: linux-fbdev@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/display/simple-framebuffer.txt
+F: drivers/video/fbdev/simplefb.c
+F: include/linux/platform_data/simplefb.h
+
SIMTEC EB110ATX (Chalice CATS)
P: Ben Dooks
P: Vincent Sanders <vince@simtec.co.uk>
@@ -12090,61 +12010,6 @@
F: lib/test_siphash.c
F: include/linux/siphash.h
-TI DAVINCI MACHINE SUPPORT
-M: Sekhar Nori <nsekhar@ti.com>
-M: Kevin Hilman <khilman@kernel.org>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci.git
-S: Supported
-F: arch/arm/mach-davinci/
-F: drivers/i2c/busses/i2c-davinci.c
-F: arch/arm/boot/dts/da850*
-
-TI DAVINCI SERIES MEDIA DRIVER
-M: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
-L: linux-media@vger.kernel.org
-W: https://linuxtv.org
-Q: http://patchwork.linuxtv.org/project/linux-media/list/
-T: git git://linuxtv.org/mhadli/v4l-dvb-davinci_devices.git
-S: Maintained
-F: drivers/media/platform/davinci/
-F: include/media/davinci/
-
-TI DAVINCI SERIES GPIO DRIVER
-M: Keerthy <j-keerthy@ti.com>
-L: linux-gpio@vger.kernel.org
-S: Maintained
-F: Documentation/devicetree/bindings/gpio/gpio-davinci.txt
-F: drivers/gpio/gpio-davinci.c
-
-TI AM437X VPFE DRIVER
-M: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
-L: linux-media@vger.kernel.org
-W: https://linuxtv.org
-Q: http://patchwork.linuxtv.org/project/linux-media/list/
-T: git git://linuxtv.org/mhadli/v4l-dvb-davinci_devices.git
-S: Maintained
-F: drivers/media/platform/am437x/
-
-OV2659 OMNIVISION SENSOR DRIVER
-M: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
-L: linux-media@vger.kernel.org
-W: https://linuxtv.org
-Q: http://patchwork.linuxtv.org/project/linux-media/list/
-T: git git://linuxtv.org/mhadli/v4l-dvb-davinci_devices.git
-S: Maintained
-F: drivers/media/i2c/ov2659.c
-F: include/media/i2c/ov2659.h
-
-SILICON MOTION SM712 FRAME BUFFER DRIVER
-M: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
-M: Teddy Wang <teddy.wang@siliconmotion.com>
-M: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
-L: linux-fbdev@vger.kernel.org
-S: Maintained
-F: drivers/video/fbdev/sm712*
-F: Documentation/fb/sm712fb.txt
-
SIS 190 ETHERNET DRIVER
M: Francois Romieu <romieu@fr.zoreil.com>
L: netdev@vger.kernel.org
@@ -12205,14 +12070,6 @@
F: Documentation/admin-guide/LSM/Smack.rst
F: security/smack/
-DRIVERS FOR ADAPTIVE VOLTAGE SCALING (AVS)
-M: Kevin Hilman <khilman@kernel.org>
-M: Nishanth Menon <nm@ti.com>
-S: Maintained
-F: drivers/power/avs/
-F: include/linux/power/smartreflex.h
-L: linux-pm@vger.kernel.org
-
SMC91x ETHERNET DRIVER
M: Nicolas Pitre <nico@fluxnic.net>
S: Odd Fixes
@@ -12250,6 +12107,12 @@
F: Documentation/hwmon/sch5627
F: drivers/hwmon/sch5627.c
+SMSC UFX6000 and UFX7000 USB to VGA DRIVER
+M: Steve Glendinning <steve.glendinning@shawell.net>
+L: linux-fbdev@vger.kernel.org
+S: Maintained
+F: drivers/video/fbdev/smscufx.c
+
SMSC47B397 HARDWARE MONITOR DRIVER
M: Jean Delvare <jdelvare@suse.com>
L: linux-hwmon@vger.kernel.org
@@ -12270,12 +12133,6 @@
S: Maintained
F: drivers/net/ethernet/smsc/smsc9420.*
-SMSC UFX6000 and UFX7000 USB to VGA DRIVER
-M: Steve Glendinning <steve.glendinning@shawell.net>
-L: linux-fbdev@vger.kernel.org
-S: Maintained
-F: drivers/video/fbdev/smscufx.c
-
SOC-CAMERA V4L2 SUBSYSTEM
M: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
L: linux-media@vger.kernel.org
@@ -12290,6 +12147,15 @@
S: Maintained
F: drivers/leds/leds-net48xx.c
+SOFT-ROCE DRIVER (rxe)
+M: Moni Shoua <monis@mellanox.com>
+L: linux-rdma@vger.kernel.org
+S: Supported
+W: https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home
+Q: http://patchwork.kernel.org/project/linux-rdma/list/
+F: drivers/infiniband/sw/rxe/
+F: include/uapi/rdma/rdma_user_rxe.h
+
SOFTLOGIC 6x10 MPEG CODEC
M: Bluecherry Maintainers <maintainers@bluecherrydvr.com>
M: Anton Sviridenko <anton@corp.bluecherry.net>
@@ -12322,16 +12188,6 @@
F: drivers/ssb/
F: include/linux/ssb/
-SONY VAIO CONTROL DEVICE DRIVER
-M: Mattia Dongili <malattia@linux.it>
-L: platform-driver-x86@vger.kernel.org
-W: http://www.linux.it/~malattia/wiki/index.php/Sony_drivers
-S: Maintained
-F: Documentation/laptops/sony-laptop.txt
-F: drivers/char/sonypi.c
-F: drivers/platform/x86/sony-laptop.c
-F: include/linux/sony-laptop.h
-
SONY MEMORYSTICK CARD SUPPORT
M: Alex Dubov <oakad@yahoo.com>
W: http://tifmxx.berlios.de/
@@ -12343,6 +12199,16 @@
S: Maintained
F: drivers/memstick/core/ms_block.*
+SONY VAIO CONTROL DEVICE DRIVER
+M: Mattia Dongili <malattia@linux.it>
+L: platform-driver-x86@vger.kernel.org
+W: http://www.linux.it/~malattia/wiki/index.php/Sony_drivers
+S: Maintained
+F: Documentation/laptops/sony-laptop.txt
+F: drivers/char/sonypi.c
+F: drivers/platform/x86/sony-laptop.c
+F: include/linux/sony-laptop.h
+
SOUND
M: Jaroslav Kysela <perex@perex.cz>
M: Takashi Iwai <tiwai@suse.com>
@@ -12368,6 +12234,13 @@
F: sound/core/compress_offload.c
F: sound/soc/soc-compress.c
+SOUND - DMAENGINE HELPERS
+M: Lars-Peter Clausen <lars@metafoo.de>
+S: Supported
+F: include/sound/dmaengine_pcm.h
+F: sound/core/pcm_dmaengine.c
+F: sound/soc/soc-generic-dmaengine-pcm.c
+
SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
M: Liam Girdwood <lgirdwood@gmail.com>
M: Mark Brown <broonie@kernel.org>
@@ -12380,13 +12253,6 @@
F: sound/soc/
F: include/sound/soc*
-SOUND - DMAENGINE HELPERS
-M: Lars-Peter Clausen <lars@metafoo.de>
-S: Supported
-F: include/sound/dmaengine_pcm.h
-F: sound/core/pcm_dmaengine.c
-F: sound/soc/soc-generic-dmaengine-pcm.c
-
SP2 MEDIA DRIVER
M: Olli Salonen <olli.salonen@iki.fi>
L: linux-media@vger.kernel.org
@@ -12429,6 +12295,13 @@
S: Maintained
F: include/linux/compiler.h
+SPEAR CLOCK FRAMEWORK SUPPORT
+M: Viresh Kumar <vireshk@kernel.org>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+W: http://www.st.com/spear
+S: Maintained
+F: drivers/clk/spear/
+
SPEAR PLATFORM SUPPORT
M: Viresh Kumar <vireshk@kernel.org>
M: Shiraz Hashim <shiraz.linux.kernel@gmail.com>
@@ -12438,20 +12311,14 @@
F: arch/arm/boot/dts/spear*
F: arch/arm/mach-spear/
-SPEAR CLOCK FRAMEWORK SUPPORT
-M: Viresh Kumar <vireshk@kernel.org>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W: http://www.st.com/spear
-S: Maintained
-F: drivers/clk/spear/
-
SPI NOR SUBSYSTEM
M: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
M: Marek Vasut <marek.vasut@gmail.com>
L: linux-mtd@lists.infradead.org
W: http://www.linux-mtd.infradead.org/
Q: http://patchwork.ozlabs.org/project/linux-mtd/list/
-T: git git://github.com/spi-nor/linux.git
+T: git git://git.infradead.org/linux-mtd.git spi-nor/fixes
+T: git git://git.infradead.org/l2-mtd.git spi-nor/next
S: Maintained
F: drivers/mtd/spi-nor/
F: include/linux/mtd/spi-nor.h
@@ -12476,6 +12343,15 @@
F: Documentation/networking/spider_net.txt
F: drivers/net/ethernet/toshiba/spider_net*
+SPMI SUBSYSTEM
+R: Stephen Boyd <sboyd@codeaurora.org>
+L: linux-arm-msm@vger.kernel.org
+F: Documentation/devicetree/bindings/spmi/
+F: drivers/spmi/
+F: include/dt-bindings/spmi/spmi.h
+F: include/linux/spmi.h
+F: include/trace/events/spmi.h
+
SPU FILE SYSTEM
M: Jeremy Kerr <jk@ozlabs.org>
L: linuxppc-dev@lists.ozlabs.org
@@ -12504,13 +12380,6 @@
S: Supported
F: Documentation/process/stable-kernel-rules.rst
-STAGING SUBSYSTEM
-M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
-L: devel@driverdev.osuosl.org
-S: Supported
-F: drivers/staging/
-
STAGING - COMEDI
M: Ian Abbott <abbotti@mev.co.uk>
M: H Hartley Sweeten <hsweeten@visionengravers.com>
@@ -12600,11 +12469,39 @@
S: Odd Fixes
F: drivers/staging/xgifb/
+STAGING SUBSYSTEM
+M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
+L: devel@driverdev.osuosl.org
+S: Supported
+F: drivers/staging/
+
STARFIRE/DURALAN NETWORK DRIVER
M: Ion Badulescu <ionut@badula.org>
S: Odd Fixes
F: drivers/net/ethernet/adaptec/starfire*
+STI CEC DRIVER
+M: Benjamin Gaignard <benjamin.gaignard@linaro.org>
+S: Maintained
+F: drivers/staging/media/st-cec/
+F: Documentation/devicetree/bindings/media/stih-cec.txt
+
+STK1160 USB VIDEO CAPTURE DRIVER
+M: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
+L: linux-media@vger.kernel.org
+T: git git://linuxtv.org/media_tree.git
+S: Maintained
+F: drivers/media/usb/stk1160/
+
+STMMAC ETHERNET DRIVER
+M: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+M: Alexandre Torgue <alexandre.torgue@st.com>
+L: netdev@vger.kernel.org
+W: http://www.stlinux.com
+S: Supported
+F: drivers/net/ethernet/stmicro/stmmac/
+
SUN3/3X
M: Sam Creasey <sammy@sammy.net>
W: http://sammy.net/sun3/
@@ -12676,6 +12573,20 @@
F: net/switchdev/
F: include/net/switchdev.h
+SYNC FILE FRAMEWORK
+M: Sumit Semwal <sumit.semwal@linaro.org>
+R: Gustavo Padovan <gustavo@padovan.org>
+S: Maintained
+L: linux-media@vger.kernel.org
+L: dri-devel@lists.freedesktop.org
+F: drivers/dma-buf/sync_*
+F: drivers/dma-buf/dma-fence*
+F: drivers/dma-buf/sw_sync.c
+F: include/linux/sync_file.h
+F: include/uapi/linux/sync_file.h
+F: Documentation/sync_file.txt
+T: git git://anongit.freedesktop.org/drm/drm-misc
+
SYNOPSYS ARC ARCHITECTURE
M: Vineet Gupta <vgupta@synopsys.com>
L: linux-snps-arc@lists.infradead.org
@@ -12694,6 +12605,35 @@
F: arch/arc/boot/dts/ax*
F: Documentation/devicetree/bindings/arc/axs10*
+SYNOPSYS DESIGNWARE DMAC DRIVER
+M: Viresh Kumar <vireshk@kernel.org>
+M: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+S: Maintained
+F: include/linux/dma/dw.h
+F: include/linux/platform_data/dma-dw.h
+F: drivers/dma/dw/
+
+SYNOPSYS DESIGNWARE ENTERPRISE ETHERNET DRIVER
+M: Jie Deng <jiedeng@synopsys.com>
+L: netdev@vger.kernel.org
+S: Supported
+F: drivers/net/ethernet/synopsys/
+
+SYNOPSYS DESIGNWARE I2C DRIVER
+M: Jarkko Nikula <jarkko.nikula@linux.intel.com>
+R: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+R: Mika Westerberg <mika.westerberg@linux.intel.com>
+L: linux-i2c@vger.kernel.org
+S: Maintained
+F: drivers/i2c/busses/i2c-designware-*
+F: include/linux/platform_data/i2c-designware.h
+
+SYNOPSYS DESIGNWARE MMC/SD/SDIO DRIVER
+M: Jaehoon Chung <jh80.chung@samsung.com>
+L: linux-mmc@vger.kernel.org
+S: Maintained
+F: drivers/mmc/host/dw_mmc*
+
SYSTEM CONFIGURATION (SYSCON)
M: Lee Jones <lee.jones@linaro.org>
M: Arnd Bergmann <arnd@arndb.de>
@@ -12701,6 +12641,16 @@
S: Supported
F: drivers/mfd/syscon.c
+SYSTEM CONTROL & POWER INTERFACE (SCPI) Message Protocol drivers
+M: Sudeep Holla <sudeep.holla@arm.com>
+L: linux-arm-kernel@lists.infradead.org
+S: Maintained
+F: Documentation/devicetree/bindings/arm/arm,scpi.txt
+F: drivers/clk/clk-scpi.c
+F: drivers/cpufreq/scpi-cpufreq.c
+F: drivers/firmware/arm_scpi.c
+F: include/linux/scpi_protocol.h
+
SYSTEM RESET/SHUTDOWN DRIVERS
M: Sebastian Reichel <sre@kernel.org>
L: linux-pm@vger.kernel.org
@@ -12709,6 +12659,15 @@
F: Documentation/devicetree/bindings/power/reset/
F: drivers/power/reset/
+SYSTEM TRACE MODULE CLASS
+M: Alexander Shishkin <alexander.shishkin@linux.intel.com>
+S: Maintained
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/ash/stm.git
+F: Documentation/trace/stm.txt
+F: drivers/hwtracing/stm/
+F: include/linux/stm.h
+F: include/uapi/linux/stm.h
+
SYSV FILESYSTEM
M: Christoph Hellwig <hch@infradead.org>
S: Maintained
@@ -12878,6 +12837,14 @@
S: Maintained
F: drivers/media/rc/ttusbir.c
+TEE SUBSYSTEM
+M: Jens Wiklander <jens.wiklander@linaro.org>
+S: Maintained
+F: include/linux/tee_drv.h
+F: include/uapi/linux/tee.h
+F: drivers/tee/
+F: Documentation/tee.txt
+
TEGRA ARCHITECTURE SUPPORT
M: Thierry Reding <thierry.reding@gmail.com>
M: Jonathan Hunter <jonathanh@nvidia.com>
@@ -13009,6 +12976,23 @@
S: Maintained
F: drivers/platform/x86/thinkpad_acpi.c
+THUNDERBOLT DRIVER
+M: Andreas Noever <andreas.noever@gmail.com>
+M: Michael Jamet <michael.jamet@intel.com>
+M: Mika Westerberg <mika.westerberg@linux.intel.com>
+M: Yehezkel Bernat <yehezkel.bernat@intel.com>
+S: Maintained
+F: drivers/thunderbolt/
+
+TI AM437X VPFE DRIVER
+M: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
+L: linux-media@vger.kernel.org
+W: https://linuxtv.org
+Q: http://patchwork.linuxtv.org/project/linux-media/list/
+T: git git://linuxtv.org/mhadli/v4l-dvb-davinci_devices.git
+S: Maintained
+F: drivers/media/platform/am437x/
+
TI BANDGAP AND THERMAL DRIVER
M: Eduardo Valentin <edubezval@gmail.com>
M: Keerthy <j-keerthy@ti.com>
@@ -13017,13 +13001,11 @@
S: Maintained
F: drivers/thermal/ti-soc-thermal/
-TI VPE/CAL DRIVERS
-M: Benoit Parrot <bparrot@ti.com>
-L: linux-media@vger.kernel.org
-W: http://linuxtv.org/
-Q: http://patchwork.linuxtv.org/project/linux-media/list/
-S: Maintained
-F: drivers/media/platform/ti-vpe/
+TI BQ27XXX POWER SUPPLY DRIVER
+R: Andrew F. Davis <afd@ti.com>
+F: include/linux/power/bq27xxx_battery.h
+F: drivers/power/supply/bq27xxx_battery.c
+F: drivers/power/supply/bq27xxx_battery_i2c.c
TI CDCE706 CLOCK DRIVER
M: Max Filippov <jcmvbkbc@gmail.com>
@@ -13037,6 +13019,33 @@
F: drivers/clk/ti/
F: include/linux/clk/ti.h
+TI DAVINCI MACHINE SUPPORT
+M: Sekhar Nori <nsekhar@ti.com>
+M: Kevin Hilman <khilman@kernel.org>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci.git
+S: Supported
+F: arch/arm/mach-davinci/
+F: drivers/i2c/busses/i2c-davinci.c
+F: arch/arm/boot/dts/da850*
+
+TI DAVINCI SERIES GPIO DRIVER
+M: Keerthy <j-keerthy@ti.com>
+L: linux-gpio@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/gpio/gpio-davinci.txt
+F: drivers/gpio/gpio-davinci.c
+
+TI DAVINCI SERIES MEDIA DRIVER
+M: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
+L: linux-media@vger.kernel.org
+W: https://linuxtv.org
+Q: http://patchwork.linuxtv.org/project/linux-media/list/
+T: git git://linuxtv.org/mhadli/v4l-dvb-davinci_devices.git
+S: Maintained
+F: drivers/media/platform/davinci/
+F: include/media/davinci/
+
TI ETHERNET SWITCH DRIVER (CPSW)
R: Grygorii Strashko <grygorii.strashko@ti.com>
L: linux-omap@vger.kernel.org
@@ -13060,7 +13069,6 @@
F: drivers/soc/ti/*
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git
-
TI LM49xxx FAMILY ASoC CODEC DRIVERS
M: M R Swami Reddy <mr.swami.reddy@ti.com>
M: Vishwas A Deshpande <vishwas.a.deshpande@ti.com>
@@ -13105,12 +13113,28 @@
S: Odd Fixes
F: sound/soc/codecs/tas571x*
+TI TRF7970A NFC DRIVER
+M: Mark Greer <mgreer@animalcreek.com>
+L: linux-wireless@vger.kernel.org
+L: linux-nfc@lists.01.org (moderated for non-subscribers)
+S: Supported
+F: drivers/nfc/trf7970a.c
+F: Documentation/devicetree/bindings/net/nfc/trf7970a.txt
+
TI TWL4030 SERIES SOC CODEC DRIVER
M: Peter Ujfalusi <peter.ujfalusi@ti.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Maintained
F: sound/soc/codecs/twl4030*
+TI VPE/CAL DRIVERS
+M: Benoit Parrot <bparrot@ti.com>
+L: linux-media@vger.kernel.org
+W: http://linuxtv.org/
+Q: http://patchwork.linuxtv.org/project/linux-media/list/
+S: Maintained
+F: drivers/media/platform/ti-vpe/
+
TI WILINK WIRELESS DRIVERS
L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/en/users/Drivers/wl12xx
@@ -13120,16 +13144,6 @@
F: drivers/net/wireless/ti/
F: include/linux/wl12xx.h
-TIPC NETWORK LAYER
-M: Jon Maloy <jon.maloy@ericsson.com>
-M: Ying Xue <ying.xue@windriver.com>
-L: netdev@vger.kernel.org (core kernel code)
-L: tipc-discussion@lists.sourceforge.net (user apps, general discussion)
-W: http://tipc.sourceforge.net/
-S: Maintained
-F: include/uapi/linux/tipc*.h
-F: net/tipc/
-
TILE ARCHITECTURE
M: Chris Metcalf <cmetcalf@mellanox.com>
W: http://www.mellanox.com/repository/solutions/tile-scm/
@@ -13145,6 +13159,34 @@
F: drivers/usb/host/*-tilegx.c
F: include/linux/usb/tilegx.h
+TIMEKEEPING, CLOCKSOURCE CORE, NTP, ALARMTIMER
+M: John Stultz <john.stultz@linaro.org>
+M: Thomas Gleixner <tglx@linutronix.de>
+R: Stephen Boyd <sboyd@codeaurora.org>
+L: linux-kernel@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
+S: Supported
+F: include/linux/clocksource.h
+F: include/linux/time.h
+F: include/linux/timex.h
+F: include/uapi/linux/time.h
+F: include/uapi/linux/timex.h
+F: kernel/time/clocksource.c
+F: kernel/time/time*.c
+F: kernel/time/alarmtimer.c
+F: kernel/time/ntp.c
+F: tools/testing/selftests/timers/
+
+TIPC NETWORK LAYER
+M: Jon Maloy <jon.maloy@ericsson.com>
+M: Ying Xue <ying.xue@windriver.com>
+L: netdev@vger.kernel.org (core kernel code)
+L: tipc-discussion@lists.sourceforge.net (user apps, general discussion)
+W: http://tipc.sourceforge.net/
+S: Maintained
+F: include/uapi/linux/tipc*.h
+F: net/tipc/
+
TLAN NETWORK DRIVER
M: Samuel Chessman <chessman@tux.org>
L: tlan-devel@lists.sourceforge.net (subscribers-only)
@@ -13153,6 +13195,38 @@
F: Documentation/networking/tlan.txt
F: drivers/net/ethernet/ti/tlan.*
+TM6000 VIDEO4LINUX DRIVER
+M: Mauro Carvalho Chehab <mchehab@s-opensource.com>
+M: Mauro Carvalho Chehab <mchehab@kernel.org>
+L: linux-media@vger.kernel.org
+W: https://linuxtv.org
+T: git git://linuxtv.org/media_tree.git
+S: Odd fixes
+F: drivers/media/usb/tm6000/
+F: Documentation/media/v4l-drivers/tm6000*
+
+TMIO/SDHI MMC DRIVER
+M: Wolfram Sang <wsa+renesas@sang-engineering.com>
+L: linux-mmc@vger.kernel.org
+S: Supported
+F: drivers/mmc/host/tmio_mmc*
+F: drivers/mmc/host/renesas_sdhi*
+F: include/linux/mfd/tmio.h
+
+TMP401 HARDWARE MONITOR DRIVER
+M: Guenter Roeck <linux@roeck-us.net>
+L: linux-hwmon@vger.kernel.org
+S: Maintained
+F: Documentation/hwmon/tmp401
+F: drivers/hwmon/tmp401.c
+
+TMPFS (SHMEM FILESYSTEM)
+M: Hugh Dickins <hughd@google.com>
+L: linux-mm@kvack.org
+S: Maintained
+F: include/linux/shmem_fs.h
+F: mm/shmem.c
+
TOMOYO SECURITY MODULE
M: Kentaro Takeda <takedakn@nttdata.co.jp>
M: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
@@ -13189,12 +13263,6 @@
S: Maintained
F: drivers/platform/x86/toshiba_haps.c
-TOSHIBA WMI HOTKEYS DRIVER
-M: Azael Avalos <coproscefalo@gmail.com>
-L: platform-driver-x86@vger.kernel.org
-S: Maintained
-F: drivers/platform/x86/toshiba-wmi.c
-
TOSHIBA SMM DRIVER
M: Jonathan Buzzard <jonathan@buzzard.org.uk>
W: http://www.buzzard.org.uk/toshiba/
@@ -13210,62 +13278,11 @@
F: drivers/media/i2c/tc358743*
F: include/media/i2c/tc358743.h
-TMIO/SDHI MMC DRIVER
-M: Wolfram Sang <wsa+renesas@sang-engineering.com>
-L: linux-mmc@vger.kernel.org
-S: Supported
-F: drivers/mmc/host/tmio_mmc*
-F: drivers/mmc/host/renesas_sdhi*
-F: include/linux/mfd/tmio.h
-
-TMP401 HARDWARE MONITOR DRIVER
-M: Guenter Roeck <linux@roeck-us.net>
-L: linux-hwmon@vger.kernel.org
+TOSHIBA WMI HOTKEYS DRIVER
+M: Azael Avalos <coproscefalo@gmail.com>
+L: platform-driver-x86@vger.kernel.org
S: Maintained
-F: Documentation/hwmon/tmp401
-F: drivers/hwmon/tmp401.c
-
-TMPFS (SHMEM FILESYSTEM)
-M: Hugh Dickins <hughd@google.com>
-L: linux-mm@kvack.org
-S: Maintained
-F: include/linux/shmem_fs.h
-F: mm/shmem.c
-
-TM6000 VIDEO4LINUX DRIVER
-M: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-M: Mauro Carvalho Chehab <mchehab@kernel.org>
-L: linux-media@vger.kernel.org
-W: https://linuxtv.org
-T: git git://linuxtv.org/media_tree.git
-S: Odd fixes
-F: drivers/media/usb/tm6000/
-F: Documentation/media/v4l-drivers/tm6000*
-
-TW5864 VIDEO4LINUX DRIVER
-M: Bluecherry Maintainers <maintainers@bluecherrydvr.com>
-M: Anton Sviridenko <anton@corp.bluecherry.net>
-M: Andrey Utkin <andrey.utkin@corp.bluecherry.net>
-M: Andrey Utkin <andrey_utkin@fastmail.com>
-L: linux-media@vger.kernel.org
-S: Supported
-F: drivers/media/pci/tw5864/
-
-TW68 VIDEO4LINUX DRIVER
-M: Hans Verkuil <hverkuil@xs4all.nl>
-L: linux-media@vger.kernel.org
-T: git git://linuxtv.org/media_tree.git
-W: https://linuxtv.org
-S: Odd Fixes
-F: drivers/media/pci/tw68/
-
-TW686X VIDEO4LINUX DRIVER
-M: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
-L: linux-media@vger.kernel.org
-T: git git://linuxtv.org/media_tree.git
-W: http://linuxtv.org
-S: Maintained
-F: drivers/media/pci/tw686x/
+F: drivers/platform/x86/toshiba-wmi.c
TPM DEVICE DRIVER
M: Peter Huewe <peterhuewe@gmx.de>
@@ -13367,6 +13384,31 @@
F: drivers/tc/
F: include/linux/tc.h
+TW5864 VIDEO4LINUX DRIVER
+M: Bluecherry Maintainers <maintainers@bluecherrydvr.com>
+M: Anton Sviridenko <anton@corp.bluecherry.net>
+M: Andrey Utkin <andrey.utkin@corp.bluecherry.net>
+M: Andrey Utkin <andrey_utkin@fastmail.com>
+L: linux-media@vger.kernel.org
+S: Supported
+F: drivers/media/pci/tw5864/
+
+TW68 VIDEO4LINUX DRIVER
+M: Hans Verkuil <hverkuil@xs4all.nl>
+L: linux-media@vger.kernel.org
+T: git git://linuxtv.org/media_tree.git
+W: https://linuxtv.org
+S: Odd Fixes
+F: drivers/media/pci/tw68/
+
+TW686X VIDEO4LINUX DRIVER
+M: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
+L: linux-media@vger.kernel.org
+T: git git://linuxtv.org/media_tree.git
+W: http://linuxtv.org
+S: Maintained
+F: drivers/media/pci/tw686x/
+
UBI FILE SYSTEM (UBIFS)
M: Richard Weinberger <richard@nod.at>
M: Artem Bityutskiy <dedekind1@gmail.com>
@@ -13416,6 +13458,13 @@
F: drivers/hid/uhid.c
F: include/uapi/linux/uhid.h
+ULPI BUS
+M: Heikki Krogerus <heikki.krogerus@linux.intel.com>
+L: linux-usb@vger.kernel.org
+S: Maintained
+F: drivers/usb/common/ulpi.c
+F: include/linux/ulpi/
+
ULTRA-WIDEBAND (UWB) SUBSYSTEM:
L: linux-usb@vger.kernel.org
S: Orphan
@@ -13459,8 +13508,7 @@
F: drivers/scsi/ufs/
UNIVERSAL FLASH STORAGE HOST CONTROLLER DRIVER DWC HOOKS
-M: Manjunath M Bettegowda <manjumb@synopsys.com>
-M: Prabu Thangamuthu <prabut@synopsys.com>
+M: Joao Pinto <jpinto@synopsys.com>
L: linux-scsi@vger.kernel.org
S: Supported
F: drivers/scsi/ufs/*dwc*
@@ -13476,6 +13524,14 @@
F: include/linux/mtd/ubi.h
F: include/uapi/mtd/ubi-user.h
+USB "USBNET" DRIVER FRAMEWORK
+M: Oliver Neukum <oneukum@suse.com>
+L: netdev@vger.kernel.org
+W: http://www.linux-usb.org/usbnet
+S: Maintained
+F: drivers/net/usb/usbnet.c
+F: include/linux/usb/usbnet.h
+
USB ACM DRIVER
M: Oliver Neukum <oneukum@suse.com>
L: linux-usb@vger.kernel.org
@@ -13699,14 +13755,6 @@
S: Maintained
F: drivers/usb/host/uhci*
-USB "USBNET" DRIVER FRAMEWORK
-M: Oliver Neukum <oneukum@suse.com>
-L: netdev@vger.kernel.org
-W: http://www.linux-usb.org/usbnet
-S: Maintained
-F: drivers/net/usb/usbnet.c
-F: include/linux/usb/usbnet.h
-
USB VIDEO CLASS
M: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
L: linux-uvc-devel@lists.sourceforge.net (subscribers-only)
@@ -13761,13 +13809,6 @@
F: Documentation/media/v4l-drivers/zr364xx*
F: drivers/media/usb/zr364xx/
-ULPI BUS
-M: Heikki Krogerus <heikki.krogerus@linux.intel.com>
-L: linux-usb@vger.kernel.org
-S: Maintained
-F: drivers/usb/common/ulpi.c
-F: include/linux/ulpi/
-
USER-MODE LINUX (UML)
M: Jeff Dike <jdike@addtoit.com>
M: Richard Weinberger <richard@nod.at>
@@ -13861,6 +13902,37 @@
F: include/linux/vga_switcheroo.h
T: git git://anongit.freedesktop.org/drm/drm-misc
+VIA RHINE NETWORK DRIVER
+S: Orphan
+F: drivers/net/ethernet/via/via-rhine.c
+
+VIA SD/MMC CARD CONTROLLER DRIVER
+M: Bruce Chang <brucechang@via.com.tw>
+M: Harald Welte <HaraldWelte@viatech.com>
+S: Maintained
+F: drivers/mmc/host/via-sdmmc.c
+
+VIA UNICHROME(PRO)/CHROME9 FRAMEBUFFER DRIVER
+M: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
+L: linux-fbdev@vger.kernel.org
+S: Maintained
+F: include/linux/via-core.h
+F: include/linux/via-gpio.h
+F: include/linux/via_i2c.h
+F: drivers/video/fbdev/via/
+
+VIA VELOCITY NETWORK DRIVER
+M: Francois Romieu <romieu@fr.zoreil.com>
+L: netdev@vger.kernel.org
+S: Maintained
+F: drivers/net/ethernet/via/via-velocity.*
+
+VIDEO MULTIPLEXER DRIVER
+M: Philipp Zabel <p.zabel@pengutronix.de>
+L: linux-media@vger.kernel.org
+S: Maintained
+F: drivers/media/platform/video-mux.c
+
VIDEOBUF2 FRAMEWORK
M: Pawel Osciak <pawel@osciak.com>
M: Marek Szyprowski <m.szyprowski@samsung.com>
@@ -13870,11 +13942,20 @@
F: drivers/media/v4l2-core/videobuf2-*
F: include/media/videobuf2-*
-VIDEO MULTIPLEXER DRIVER
-M: Philipp Zabel <p.zabel@pengutronix.de>
+VIMC VIRTUAL MEDIA CONTROLLER DRIVER
+M: Helen Koike <helen.koike@collabora.com>
L: linux-media@vger.kernel.org
+T: git git://linuxtv.org/media_tree.git
+W: https://linuxtv.org
S: Maintained
-F: drivers/media/platform/video-mux.c
+F: drivers/media/platform/vimc/*
+
+VIRT LIB
+M: Alex Williamson <alex.williamson@redhat.com>
+M: Paolo Bonzini <pbonzini@redhat.com>
+L: kvm@vger.kernel.org
+S: Supported
+F: virt/lib/
VIRTIO AND VHOST VSOCK DRIVER
M: Stefan Hajnoczi <stefanha@redhat.com>
@@ -13892,12 +13973,6 @@
F: drivers/vhost/vsock.c
F: drivers/vhost/vsock.h
-VIRTUAL SERIO DEVICE DRIVER
-M: Stephen Chandler Paul <thatslyude@gmail.com>
-S: Maintained
-F: drivers/input/serio/userio.c
-F: include/uapi/linux/userio.h
-
VIRTIO CONSOLE DRIVER
M: Amit Shah <amit@kernel.org>
L: virtualization@lists.linux-foundation.org
@@ -13920,6 +13995,14 @@
F: include/uapi/linux/virtio_*.h
F: drivers/crypto/virtio/
+VIRTIO CRYPTO DRIVER
+M: Gonglei <arei.gonglei@huawei.com>
+L: virtualization@lists.linux-foundation.org
+L: linux-crypto@vger.kernel.org
+S: Maintained
+F: drivers/crypto/virtio/
+F: include/uapi/linux/virtio_crypto.h
+
VIRTIO DRIVERS FOR S390
M: Cornelia Huck <cohuck@redhat.com>
M: Halil Pasic <pasic@linux.vnet.ibm.com>
@@ -13956,45 +14039,11 @@
F: drivers/virtio/virtio_input.c
F: include/uapi/linux/virtio_input.h
-VIRTIO CRYPTO DRIVER
-M: Gonglei <arei.gonglei@huawei.com>
-L: virtualization@lists.linux-foundation.org
-L: linux-crypto@vger.kernel.org
-S: Maintained
-F: drivers/crypto/virtio/
-F: include/uapi/linux/virtio_crypto.h
-
-VIA RHINE NETWORK DRIVER
-S: Orphan
-F: drivers/net/ethernet/via/via-rhine.c
-
-VIA SD/MMC CARD CONTROLLER DRIVER
-M: Bruce Chang <brucechang@via.com.tw>
-M: Harald Welte <HaraldWelte@viatech.com>
+VIRTUAL SERIO DEVICE DRIVER
+M: Stephen Chandler Paul <thatslyude@gmail.com>
S: Maintained
-F: drivers/mmc/host/via-sdmmc.c
-
-VIA UNICHROME(PRO)/CHROME9 FRAMEBUFFER DRIVER
-M: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-L: linux-fbdev@vger.kernel.org
-S: Maintained
-F: include/linux/via-core.h
-F: include/linux/via-gpio.h
-F: include/linux/via_i2c.h
-F: drivers/video/fbdev/via/
-
-VIA VELOCITY NETWORK DRIVER
-M: Francois Romieu <romieu@fr.zoreil.com>
-L: netdev@vger.kernel.org
-S: Maintained
-F: drivers/net/ethernet/via/via-velocity.*
-
-VIRT LIB
-M: Alex Williamson <alex.williamson@redhat.com>
-M: Paolo Bonzini <pbonzini@redhat.com>
-L: kvm@vger.kernel.org
-S: Supported
-F: virt/lib/
+F: drivers/input/serio/userio.c
+F: include/uapi/linux/userio.h
VIVID VIRTUAL VIDEO DRIVER
M: Hans Verkuil <hverkuil@xs4all.nl>
@@ -14004,14 +14053,6 @@
S: Maintained
F: drivers/media/platform/vivid/*
-VIMC VIRTUAL MEDIA CONTROLLER DRIVER
-M: Helen Koike <helen.koike@collabora.com>
-L: linux-media@vger.kernel.org
-T: git git://linuxtv.org/media_tree.git
-W: https://linuxtv.org
-S: Maintained
-F: drivers/media/platform/vimc/*
-
VLYNQ BUS
M: Florian Fainelli <f.fainelli@gmail.com>
L: openwrt-devel@lists.openwrt.org (subscribers-only)
@@ -14031,12 +14072,6 @@
F: drivers/vme/
F: include/linux/vme*
-VMWARE HYPERVISOR INTERFACE
-M: Alok Kataria <akataria@vmware.com>
-L: virtualization@lists.linux-foundation.org
-S: Supported
-F: arch/x86/kernel/cpu/vmware.c
-
VMWARE BALLOON DRIVER
M: Xavier Deguillard <xdeguillard@vmware.com>
M: Philip Moltmann <moltmann@vmware.com>
@@ -14045,6 +14080,27 @@
S: Maintained
F: drivers/misc/vmw_balloon.c
+VMWARE HYPERVISOR INTERFACE
+M: Alok Kataria <akataria@vmware.com>
+L: virtualization@lists.linux-foundation.org
+S: Supported
+F: arch/x86/kernel/cpu/vmware.c
+
+VMWARE PVRDMA DRIVER
+M: Adit Ranadive <aditr@vmware.com>
+M: VMware PV-Drivers <pv-drivers@vmware.com>
+L: linux-rdma@vger.kernel.org
+S: Maintained
+F: drivers/infiniband/hw/vmw_pvrdma/
+
+VMware PVSCSI driver
+M: Jim Gill <jgill@vmware.com>
+M: VMware PV-Drivers <pv-drivers@vmware.com>
+L: linux-scsi@vger.kernel.org
+S: Maintained
+F: drivers/scsi/vmw_pvscsi.c
+F: drivers/scsi/vmw_pvscsi.h
+
VMWARE VMMOUSE SUBDRIVER
M: "VMware Graphics" <linux-graphics-maintainer@vmware.com>
M: "VMware, Inc." <pv-drivers@vmware.com>
@@ -14060,21 +14116,6 @@
S: Maintained
F: drivers/net/vmxnet3/
-VMware PVSCSI driver
-M: Jim Gill <jgill@vmware.com>
-M: VMware PV-Drivers <pv-drivers@vmware.com>
-L: linux-scsi@vger.kernel.org
-S: Maintained
-F: drivers/scsi/vmw_pvscsi.c
-F: drivers/scsi/vmw_pvscsi.h
-
-VMWARE PVRDMA DRIVER
-M: Adit Ranadive <aditr@vmware.com>
-M: VMware PV-Drivers <pv-drivers@vmware.com>
-L: linux-rdma@vger.kernel.org
-S: Maintained
-F: drivers/infiniband/hw/vmw_pvrdma/
-
VOLTAGE AND CURRENT REGULATOR FRAMEWORK
M: Liam Girdwood <lgirdwood@gmail.com>
M: Mark Brown <broonie@kernel.org>
@@ -14167,12 +14208,39 @@
F: include/linux/watchdog.h
F: include/uapi/linux/watchdog.h
+WHISKEYCOVE PMIC GPIO DRIVER
+M: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
+L: linux-gpio@vger.kernel.org
+S: Maintained
+F: drivers/gpio/gpio-wcove.c
+
WIIMOTE HID DRIVER
M: David Herrmann <dh.herrmann@googlemail.com>
L: linux-input@vger.kernel.org
S: Maintained
F: drivers/hid/hid-wiimote*
+WILOCITY WIL6210 WIRELESS DRIVER
+M: Maya Erez <qca_merez@qca.qualcomm.com>
+L: linux-wireless@vger.kernel.org
+L: wil6210@qca.qualcomm.com
+S: Supported
+W: http://wireless.kernel.org/en/users/Drivers/wil6210
+F: drivers/net/wireless/ath/wil6210/
+F: include/uapi/linux/wil6210_uapi.h
+
+WIMAX STACK
+M: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+M: linux-wimax@intel.com
+L: wimax@linuxwimax.org (subscribers-only)
+S: Supported
+W: http://linuxwimax.org
+F: Documentation/wimax/README.wimax
+F: include/linux/wimax/debug.h
+F: include/net/wimax.h
+F: include/uapi/linux/wimax.h
+F: net/wimax/
+
WINBOND CIR DRIVER
M: David Härdeman <david@hardeman.nu>
S: Maintained
@@ -14190,18 +14258,6 @@
S: Maintained
F: drivers/gpio/gpio-ws16c48.c
-WIMAX STACK
-M: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
-M: linux-wimax@intel.com
-L: wimax@linuxwimax.org (subscribers-only)
-S: Supported
-W: http://linuxwimax.org
-F: Documentation/wimax/README.wimax
-F: include/linux/wimax/debug.h
-F: include/net/wimax.h
-F: include/uapi/linux/wimax.h
-F: net/wimax/
-
WISTRON LAPTOP BUTTON DRIVER
M: Miloslav Trmac <mitr@volny.cz>
S: Maintained
@@ -14286,15 +14342,6 @@
F: Documentation/x86/
F: arch/x86/
-X86 PLATFORM DRIVERS
-M: Darren Hart <dvhart@infradead.org>
-M: Andy Shevchenko <andy@infradead.org>
-L: platform-driver-x86@vger.kernel.org
-T: git git://git.infradead.org/users/dvhart/linux-platform-drivers-x86.git
-S: Maintained
-F: drivers/platform/x86/
-F: drivers/platform/olpc/
-
X86 MCE INFRASTRUCTURE
M: Tony Luck <tony.luck@intel.com>
M: Borislav Petkov <bp@alien8.de>
@@ -14307,6 +14354,15 @@
S: Maintained
F: arch/x86/kernel/cpu/microcode/*
+X86 PLATFORM DRIVERS
+M: Darren Hart <dvhart@infradead.org>
+M: Andy Shevchenko <andy@infradead.org>
+L: platform-driver-x86@vger.kernel.org
+T: git git://git.infradead.org/users/dvhart/linux-platform-drivers-x86.git
+S: Maintained
+F: drivers/platform/x86/
+F: drivers/platform/olpc/
+
X86 VDSO
M: Andy Lutomirski <luto@amacapital.net>
L: linux-kernel@vger.kernel.org
@@ -14323,20 +14379,13 @@
S: Maintained
F: drivers/media/tuners/tuner-xc2028.*
-XEN HYPERVISOR INTERFACE
-M: Boris Ostrovsky <boris.ostrovsky@oracle.com>
-M: Juergen Gross <jgross@suse.com>
+XEN BLOCK SUBSYSTEM
+M: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+M: Roger Pau Monné <roger.pau@citrix.com>
L: xen-devel@lists.xenproject.org (moderated for non-subscribers)
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip.git
S: Supported
-F: arch/x86/xen/
-F: drivers/*/xen-*front.c
-F: drivers/xen/
-F: arch/x86/include/asm/xen/
-F: include/xen/
-F: include/uapi/xen/
-F: Documentation/ABI/stable/sysfs-hypervisor-xen
-F: Documentation/ABI/testing/sysfs-hypervisor-xen
+F: drivers/block/xen-blkback/*
+F: drivers/block/xen*
XEN HYPERVISOR ARM
M: Stefano Stabellini <sstabellini@kernel.org>
@@ -14352,6 +14401,21 @@
F: arch/arm64/xen/
F: arch/arm64/include/asm/xen/
+XEN HYPERVISOR INTERFACE
+M: Boris Ostrovsky <boris.ostrovsky@oracle.com>
+M: Juergen Gross <jgross@suse.com>
+L: xen-devel@lists.xenproject.org (moderated for non-subscribers)
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip.git
+S: Supported
+F: arch/x86/xen/
+F: drivers/*/xen-*front.c
+F: drivers/xen/
+F: arch/x86/include/asm/xen/
+F: include/xen/
+F: include/uapi/xen/
+F: Documentation/ABI/stable/sysfs-hypervisor-xen
+F: Documentation/ABI/testing/sysfs-hypervisor-xen
+
XEN NETWORK BACKEND DRIVER
M: Wei Liu <wei.liu2@citrix.com>
M: Paul Durrant <paul.durrant@citrix.com>
@@ -14367,14 +14431,6 @@
F: arch/x86/pci/*xen*
F: drivers/pci/*xen*
-XEN BLOCK SUBSYSTEM
-M: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-M: Roger Pau Monné <roger.pau@citrix.com>
-L: xen-devel@lists.xenproject.org (moderated for non-subscribers)
-S: Supported
-F: drivers/block/xen-blkback/*
-F: drivers/block/xen*
-
XEN PVSCSI DRIVERS
M: Juergen Gross <jgross@suse.com>
L: xen-devel@lists.xenproject.org (moderated for non-subscribers)
@@ -14451,6 +14507,13 @@
F: drivers/net/hamradio/yam*
F: include/linux/yam.h
+YAMA SECURITY MODULE
+M: Kees Cook <keescook@chromium.org>
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git yama/tip
+S: Supported
+F: security/yama/
+F: Documentation/admin-guide/LSM/Yama.rst
+
YEALINK PHONE DRIVER
M: Henk Vergonet <Henk.Vergonet@gmail.com>
L: usbb2k-api-dev@nongnu.org
@@ -14485,15 +14548,6 @@
S: Maintained
F: drivers/net/wireless/zydas/zd1211rw/
-ZD1301_DEMOD MEDIA DRIVER
-M: Antti Palosaari <crope@iki.fi>
-L: linux-media@vger.kernel.org
-W: https://linuxtv.org/
-W: http://palosaari.fi/linux/
-Q: https://patchwork.linuxtv.org/project/linux-media/list/
-S: Maintained
-F: drivers/media/dvb-frontends/zd1301_demod*
-
ZD1301 MEDIA DRIVER
M: Antti Palosaari <crope@iki.fi>
L: linux-media@vger.kernel.org
@@ -14503,6 +14557,15 @@
S: Maintained
F: drivers/media/usb/dvb-usb-v2/zd1301*
+ZD1301_DEMOD MEDIA DRIVER
+M: Antti Palosaari <crope@iki.fi>
+L: linux-media@vger.kernel.org
+W: https://linuxtv.org/
+W: http://palosaari.fi/linux/
+Q: https://patchwork.linuxtv.org/project/linux-media/list/
+S: Maintained
+F: drivers/media/dvb-frontends/zd1301_demod*
+
ZPOOL COMPRESSED PAGE STORAGE API
M: Dan Streetman <ddstreet@ieee.org>
L: linux-mm@kvack.org
diff --git a/Makefile b/Makefile
index 06ef994..6eba23b 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 4
-PATCHLEVEL = 12
+PATCHLEVEL = 13
SUBLEVEL = 0
-EXTRAVERSION =
+EXTRAVERSION = -rc4
NAME = Fearless Coyote
# *DOCUMENTATION*
@@ -294,10 +294,17 @@
else if [ -x /bin/bash ]; then echo /bin/bash; \
else echo sh; fi ; fi)
+HOST_LFS_CFLAGS := $(shell getconf LFS_CFLAGS)
+HOST_LFS_LDFLAGS := $(shell getconf LFS_LDFLAGS)
+HOST_LFS_LIBS := $(shell getconf LFS_LIBS)
+
HOSTCC = gcc
HOSTCXX = g++
-HOSTCFLAGS := -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer -std=gnu89
-HOSTCXXFLAGS = -O2
+HOSTCFLAGS := -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 \
+ -fomit-frame-pointer -std=gnu89 $(HOST_LFS_CFLAGS)
+HOSTCXXFLAGS := -O2 $(HOST_LFS_CFLAGS)
+HOSTLDFLAGS := $(HOST_LFS_LDFLAGS)
+HOST_LOADLIBES := $(HOST_LFS_LIBS)
ifeq ($(shell $(HOSTCC) -v 2>&1 | grep -c "clang version"), 1)
HOSTCFLAGS += -Wno-unused-value -Wno-unused-parameter \
@@ -408,7 +415,7 @@
export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
-export CPP AR NM STRIP OBJCOPY OBJDUMP
+export CPP AR NM STRIP OBJCOPY OBJDUMP HOSTLDFLAGS HOST_LOADLIBES
export MAKE AWK GENKSYMS INSTALLKERNEL PERL PYTHON UTS_MACHINE
export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
@@ -456,10 +463,11 @@
endif
# Support for using generic headers in asm-generic
-PHONY += asm-generic
-asm-generic:
+PHONY += asm-generic uapi-asm-generic
+asm-generic: uapi-asm-generic
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \
src=asm obj=arch/$(SRCARCH)/include/generated/asm
+uapi-asm-generic:
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \
src=uapi/asm obj=arch/$(SRCARCH)/include/generated/uapi/asm
@@ -622,6 +630,9 @@
KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks,)
KBUILD_CFLAGS += $(call cc-disable-warning,frame-address,)
+KBUILD_CFLAGS += $(call cc-disable-warning, format-truncation)
+KBUILD_CFLAGS += $(call cc-disable-warning, format-overflow)
+KBUILD_CFLAGS += $(call cc-disable-warning, int-in-bool-context)
ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
KBUILD_CFLAGS += $(call cc-option,-Oz,-Os)
@@ -1133,7 +1144,7 @@
#Default location for installed headers
export INSTALL_HDR_PATH = $(objtree)/usr
-# If we do an all arch process set dst to asm-$(hdr-arch)
+# If we do an all arch process set dst to include/arch-$(hdr-arch)
hdr-dst = $(if $(KBUILD_HEADERS), dst=include/arch-$(hdr-arch), dst=include)
PHONY += archheaders
@@ -1143,7 +1154,7 @@
archscripts:
PHONY += __headers
-__headers: $(version_h) scripts_basic asm-generic archheaders archscripts
+__headers: $(version_h) scripts_basic uapi-asm-generic archheaders archscripts
$(Q)$(MAKE) $(build)=scripts build_unifdef
PHONY += headers_install_all
@@ -1154,7 +1165,7 @@
headers_install: __headers
$(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/uapi/asm/Kbuild),, \
$(error Headers not exportable for the $(SRCARCH) architecture))
- $(Q)$(MAKE) $(hdr-inst)=include/uapi
+ $(Q)$(MAKE) $(hdr-inst)=include/uapi dst=include
$(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi $(hdr-dst)
PHONY += headers_check_all
@@ -1163,7 +1174,7 @@
PHONY += headers_check
headers_check: headers_install
- $(Q)$(MAKE) $(hdr-inst)=include/uapi HDRCHECK=1
+ $(Q)$(MAKE) $(hdr-inst)=include/uapi dst=include HDRCHECK=1
$(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi $(hdr-dst) HDRCHECK=1
# ---------------------------------------------------------------------------
diff --git a/arch/Kconfig b/arch/Kconfig
index cae0958..21d0089 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -198,9 +198,6 @@
config HAVE_NMI
bool
-config HAVE_NMI_WATCHDOG
- depends on HAVE_NMI
- bool
#
# An arch should select this if it provides all these things:
#
@@ -226,6 +223,12 @@
config GENERIC_IDLE_POLL_SETUP
bool
+config ARCH_HAS_FORTIFY_SOURCE
+ bool
+ help
+ An architecture should select this when it can successfully
+ build and run with CONFIG_FORTIFY_SOURCE.
+
# Select if arch has all set_memory_ro/rw/x/nx() functions in asm/cacheflush.h
config ARCH_HAS_SET_MEMORY
bool
@@ -288,6 +291,28 @@
subsystem. Also has support for calculating CPU cycle events
to determine how many clock cycles in a given period.
+config HAVE_HARDLOCKUP_DETECTOR_PERF
+ bool
+ depends on HAVE_PERF_EVENTS_NMI
+ help
+ The arch chooses to use the generic perf-NMI-based hardlockup
+ detector. Must define HAVE_PERF_EVENTS_NMI.
+
+config HAVE_NMI_WATCHDOG
+ depends on HAVE_NMI
+ bool
+ help
+ The arch provides a low level NMI watchdog. It provides
+ asm/nmi.h, and defines its own arch_touch_nmi_watchdog().
+
+config HAVE_HARDLOCKUP_DETECTOR_ARCH
+ bool
+ select HAVE_NMI_WATCHDOG
+ help
+ The arch chooses to provide its own hardlockup detector, which is
+ a superset of the HAVE_NMI_WATCHDOG. It also conforms to config
+ interfaces and parameters provided by hardlockup detector subsystem.
+
config HAVE_PERF_REGS
bool
help
diff --git a/arch/alpha/include/uapi/asm/ioctls.h b/arch/alpha/include/uapi/asm/ioctls.h
index ff67b837..1cd7dc7 100644
--- a/arch/alpha/include/uapi/asm/ioctls.h
+++ b/arch/alpha/include/uapi/asm/ioctls.h
@@ -100,7 +100,7 @@
#define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */
#define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */
#define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */
-#define TIOCGPTPEER _IOR('T', 0x41, int) /* Safely open the slave */
+#define TIOCGPTPEER _IO('T', 0x41) /* Safely open the slave */
#define TIOCSERCONFIG 0x5453
#define TIOCSERGWILD 0x5454
diff --git a/arch/arc/include/asm/Kbuild b/arch/arc/include/asm/Kbuild
index 3e74ca5..353dae3 100644
--- a/arch/arc/include/asm/Kbuild
+++ b/arch/arc/include/asm/Kbuild
@@ -1,51 +1,27 @@
-generic-y += auxvec.h
-generic-y += bitsperlong.h
generic-y += bugs.h
generic-y += clkdev.h
generic-y += device.h
generic-y += div64.h
generic-y += emergency-restart.h
-generic-y += errno.h
generic-y += extable.h
generic-y += fb.h
-generic-y += fcntl.h
generic-y += ftrace.h
generic-y += hardirq.h
generic-y += hw_irq.h
-generic-y += ioctl.h
-generic-y += ioctls.h
-generic-y += ipcbuf.h
generic-y += irq_regs.h
generic-y += irq_work.h
generic-y += kmap_types.h
-generic-y += kvm_para.h
generic-y += local.h
generic-y += local64.h
generic-y += mcs_spinlock.h
generic-y += mm-arch-hooks.h
-generic-y += mman.h
-generic-y += msgbuf.h
generic-y += msi.h
-generic-y += param.h
generic-y += parport.h
generic-y += pci.h
generic-y += percpu.h
-generic-y += poll.h
-generic-y += posix_types.h
generic-y += preempt.h
-generic-y += resource.h
-generic-y += sembuf.h
-generic-y += shmbuf.h
-generic-y += socket.h
-generic-y += sockios.h
-generic-y += stat.h
-generic-y += statfs.h
-generic-y += termbits.h
-generic-y += termios.h
generic-y += topology.h
generic-y += trace_clock.h
-generic-y += types.h
-generic-y += ucontext.h
generic-y += user.h
generic-y += vga.h
generic-y += word-at-a-time.h
diff --git a/arch/arc/include/uapi/asm/Kbuild b/arch/arc/include/uapi/asm/Kbuild
index b55fc2a..fa6d0ff 100644
--- a/arch/arc/include/uapi/asm/Kbuild
+++ b/arch/arc/include/uapi/asm/Kbuild
@@ -1,4 +1,28 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
+generic-y += auxvec.h
+generic-y += bitsperlong.h
+generic-y += errno.h
+generic-y += fcntl.h
+generic-y += ioctl.h
+generic-y += ioctls.h
+generic-y += ipcbuf.h
+generic-y += kvm_para.h
+generic-y += mman.h
+generic-y += msgbuf.h
+generic-y += param.h
+generic-y += poll.h
+generic-y += posix_types.h
+generic-y += resource.h
+generic-y += sembuf.h
+generic-y += shmbuf.h
generic-y += siginfo.h
+generic-y += socket.h
+generic-y += sockios.h
+generic-y += stat.h
+generic-y += statfs.h
+generic-y += termbits.h
+generic-y += termios.h
+generic-y += types.h
+generic-y += ucontext.h
diff --git a/arch/arc/mm/dma.c b/arch/arc/mm/dma.c
index 2a07e6e..71d3eff 100644
--- a/arch/arc/mm/dma.c
+++ b/arch/arc/mm/dma.c
@@ -117,7 +117,7 @@
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
- if (dma_mmap_from_coherent(dev, vma, cpu_addr, size, &ret))
+ if (dma_mmap_from_dev_coherent(dev, vma, cpu_addr, size, &ret))
return ret;
if (off < count && user_count <= (count - off)) {
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a208bfe..61a0cb1 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -380,7 +380,7 @@
bool "EP93xx-based"
select ARCH_HAS_HOLES_MEMORYMODEL
select ARM_AMBA
- select ARM_PATCH_PHYS_VIRT
+ imply ARM_PATCH_PHYS_VIRT
select ARM_VIC
select AUTO_ZRELADDR
select CLKDEV_LOOKUP
diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts
index 895fa6c..563901e 100644
--- a/arch/arm/boot/dts/armada-388-gp.dts
+++ b/arch/arm/boot/dts/armada-388-gp.dts
@@ -75,7 +75,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pca0_pins>;
interrupt-parent = <&gpio0>;
- interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -87,7 +87,7 @@
compatible = "nxp,pca9555";
pinctrl-names = "default";
interrupt-parent = <&gpio0>;
- interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index a423e8e..67e72bc 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -301,25 +301,4 @@
pinctrl-names = "default";
pinctrl-0 = <&vpif_capture_pins>, <&vpif_display_pins>;
status = "okay";
-
- /* VPIF capture port */
- port@0 {
- vpif_input_ch0: endpoint@0 {
- reg = <0>;
- bus-width = <8>;
- };
-
- vpif_input_ch1: endpoint@1 {
- reg = <1>;
- bus-width = <8>;
- data-shift = <8>;
- };
- };
-
- /* VPIF display port */
- port@1 {
- vpif_output_ch0: endpoint {
- bus-width = <8>;
- };
- };
};
diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index b837fec..a0f0916 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -318,11 +318,4 @@
pinctrl-names = "default";
pinctrl-0 = <&vpif_capture_pins>;
status = "okay";
-
- /* VPIF capture port */
- port {
- vpif_ch0: endpoint {
- bus-width = <8>;
- };
- };
};
diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts
index 1865976..c72a213 100644
--- a/arch/arm/boot/dts/dm8168-evm.dts
+++ b/arch/arm/boot/dts/dm8168-evm.dts
@@ -68,6 +68,34 @@
DM816X_IOPAD(0x0d08, MUX_MODE0) /* USB1_DRVVBUS */
>;
};
+
+ nandflash_pins: nandflash_pins {
+ pinctrl-single,pins = <
+ DM816X_IOPAD(0x0b38, PULL_UP | MUX_MODE0) /* PINCTRL207 GPMC_CS0*/
+ DM816X_IOPAD(0x0b60, PULL_ENA | MUX_MODE0) /* PINCTRL217 GPMC_ADV_ALE */
+ DM816X_IOPAD(0x0b54, PULL_UP | PULL_ENA | MUX_MODE0) /* PINCTRL214 GPMC_OE_RE */
+ DM816X_IOPAD(0x0b58, PULL_ENA | MUX_MODE0) /* PINCTRL215 GPMC_BE0_CLE */
+ DM816X_IOPAD(0x0b50, PULL_UP | MUX_MODE0) /* PINCTRL213 GPMC_WE */
+ DM816X_IOPAD(0x0b6c, MUX_MODE0) /* PINCTRL220 GPMC_WAIT */
+ DM816X_IOPAD(0x0be4, PULL_ENA | MUX_MODE0) /* PINCTRL250 GPMC_CLK */
+ DM816X_IOPAD(0x0ba4, MUX_MODE0) /* PINCTRL234 GPMC_D0 */
+ DM816X_IOPAD(0x0ba8, MUX_MODE0) /* PINCTRL234 GPMC_D1 */
+ DM816X_IOPAD(0x0bac, MUX_MODE0) /* PINCTRL234 GPMC_D2 */
+ DM816X_IOPAD(0x0bb0, MUX_MODE0) /* PINCTRL234 GPMC_D3 */
+ DM816X_IOPAD(0x0bb4, MUX_MODE0) /* PINCTRL234 GPMC_D4 */
+ DM816X_IOPAD(0x0bb8, MUX_MODE0) /* PINCTRL234 GPMC_D5 */
+ DM816X_IOPAD(0x0bbc, MUX_MODE0) /* PINCTRL234 GPMC_D6 */
+ DM816X_IOPAD(0x0bc0, MUX_MODE0) /* PINCTRL234 GPMC_D7 */
+ DM816X_IOPAD(0x0bc4, MUX_MODE0) /* PINCTRL234 GPMC_D8 */
+ DM816X_IOPAD(0x0bc8, MUX_MODE0) /* PINCTRL234 GPMC_D9 */
+ DM816X_IOPAD(0x0bcc, MUX_MODE0) /* PINCTRL234 GPMC_D10 */
+ DM816X_IOPAD(0x0bd0, MUX_MODE0) /* PINCTRL234 GPMC_D11 */
+ DM816X_IOPAD(0x0bd4, MUX_MODE0) /* PINCTRL234 GPMC_D12 */
+ DM816X_IOPAD(0x0bd8, MUX_MODE0) /* PINCTRL234 GPMC_D13 */
+ DM816X_IOPAD(0x0bdc, MUX_MODE0) /* PINCTRL234 GPMC_D14 */
+ DM816X_IOPAD(0x0be0, MUX_MODE0) /* PINCTRL234 GPMC_D15 */
+ >;
+ };
};
&i2c1 {
@@ -90,6 +118,8 @@
&gpmc {
ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */
+ pinctrl-names = "default";
+ pinctrl-0 = <&nandflash_pins>;
nand@0,0 {
compatible = "ti,omap2-nand";
@@ -98,9 +128,11 @@
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
+ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
#address-cells = <1>;
#size-cells = <1>;
ti,nand-ecc-opt = "bch8";
+ ti,elm-id = <&elm>;
nand-bus-width = <16>;
gpmc,device-width = <2>;
gpmc,sync-clk-ps = <0>;
@@ -164,7 +196,7 @@
vmmc-supply = <&vmmcsd_fixed>;
bus-width = <4>;
cd-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
};
/* At least dm8168-evm rev c won't support multipoint, later may */
diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
index 59cbf95..566b2a8 100644
--- a/arch/arm/boot/dts/dm816x.dtsi
+++ b/arch/arm/boot/dts/dm816x.dtsi
@@ -145,7 +145,7 @@
};
elm: elm@48080000 {
- compatible = "ti,816-elm";
+ compatible = "ti,am3352-elm";
ti,hwmods = "elm";
reg = <0x48080000 0x2000>;
interrupts = <4>;
diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts
index 4d57a55..a6298eb 100644
--- a/arch/arm/boot/dts/dra71-evm.dts
+++ b/arch/arm/boot/dts/dra71-evm.dts
@@ -190,7 +190,7 @@
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
- ti,impedance-control = <0x1f>;
+ ti,min-output-impedance;
};
dp83867_1: ethernet-phy@3 {
@@ -198,7 +198,7 @@
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
- ti,impedance-control = <0x1f>;
+ ti,min-output-impedance;
};
};
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 497a947..5739389 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -59,6 +59,9 @@
compatible = "samsung,exynos4210-audss-clock";
reg = <0x03810000 0x0C>;
#clock-cells = <1>;
+ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
+ <&clock CLK_SCLK_AUDIO0>, <&clock CLK_SCLK_AUDIO0>;
+ clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
};
i2s0: i2s@03830000 {
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 2484f11..858e1fed 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -1126,8 +1126,8 @@
};
};
- gpu: mali@ffa30000 {
- compatible = "rockchip,rk3288-mali", "arm,mali-t760", "arm,mali-midgard";
+ gpu: gpu@ffa30000 {
+ compatible = "rockchip,rk3288-mali", "arm,mali-t760";
reg = <0xffa30000 0x10000>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 8923ba6..19a8f4f 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -44,7 +44,9 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun8i-a83t-ccu.h>
#include <dt-bindings/clock/sun8i-r-ccu.h>
+#include <dt-bindings/reset/sun8i-a83t-ccu.h>
/ {
interrupt-parent = <&gic>;
@@ -175,8 +177,8 @@
compatible = "allwinner,sun8i-a83t-dma";
reg = <0x01c02000 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu 21>;
- resets = <&ccu 7>;
+ clocks = <&ccu CLK_BUS_DMA>;
+ resets = <&ccu RST_BUS_DMA>;
#dma-cells = <1>;
};
@@ -195,7 +197,7 @@
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x01c20800 0x400>;
- clocks = <&ccu 45>, <&osc24M>, <&osc16Md512>;
+ clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc16Md512>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
interrupt-controller;
@@ -247,8 +249,8 @@
"allwinner,sun8i-h3-spdif";
reg = <0x01c21000 0x400>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu 44>, <&ccu 76>;
- resets = <&ccu 32>;
+ clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
+ resets = <&ccu RST_BUS_SPDIF>;
clock-names = "apb", "spdif";
dmas = <&dma 2>;
dma-names = "tx";
@@ -263,8 +265,8 @@
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&ccu 53>;
- resets = <&ccu 40>;
+ clocks = <&ccu CLK_BUS_UART0>;
+ resets = <&ccu RST_BUS_UART0>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 6f21626..d38282b 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -394,7 +394,7 @@
emac: ethernet@1c30000 {
compatible = "allwinner,sun8i-h3-emac";
syscon = <&syscon>;
- reg = <0x01c30000 0x104>;
+ reg = <0x01c30000 0x10000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
resets = <&ccu RST_BUS_EMAC>;
diff --git a/arch/arm/boot/dts/tango4-vantage-1172.dts b/arch/arm/boot/dts/tango4-vantage-1172.dts
index 86d8df9..13bcc46 100644
--- a/arch/arm/boot/dts/tango4-vantage-1172.dts
+++ b/arch/arm/boot/dts/tango4-vantage-1172.dts
@@ -22,7 +22,7 @@
};
ð0 {
- phy-connection-type = "rgmii";
+ phy-connection-type = "rgmii-id";
phy-handle = <ð0_phy>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild
index d836050..721ab5e 100644
--- a/arch/arm/include/asm/Kbuild
+++ b/arch/arm/include/asm/Kbuild
@@ -1,39 +1,23 @@
-
-
-generic-y += bitsperlong.h
generic-y += clkdev.h
generic-y += current.h
generic-y += early_ioremap.h
generic-y += emergency-restart.h
-generic-y += errno.h
generic-y += exec.h
generic-y += extable.h
-generic-y += ioctl.h
-generic-y += ipcbuf.h
generic-y += irq_regs.h
generic-y += kdebug.h
generic-y += local.h
generic-y += local64.h
generic-y += mm-arch-hooks.h
-generic-y += msgbuf.h
generic-y += msi.h
-generic-y += param.h
generic-y += parport.h
-generic-y += poll.h
generic-y += preempt.h
-generic-y += resource.h
generic-y += rwsem.h
generic-y += seccomp.h
generic-y += segment.h
-generic-y += sembuf.h
generic-y += serial.h
-generic-y += shmbuf.h
generic-y += simd.h
generic-y += sizes.h
-generic-y += socket.h
-generic-y += sockios.h
-generic-y += termbits.h
-generic-y += termios.h
generic-y += timex.h
generic-y += trace_clock.h
generic-y += unaligned.h
diff --git a/arch/arm/include/asm/bug.h b/arch/arm/include/asm/bug.h
index 4e6e88a..2244a94e 100644
--- a/arch/arm/include/asm/bug.h
+++ b/arch/arm/include/asm/bug.h
@@ -37,7 +37,7 @@
".pushsection .rodata.str, \"aMS\", %progbits, 1\n" \
"2:\t.asciz " #__file "\n" \
".popsection\n" \
- ".pushsection __bug_table,\"a\"\n" \
+ ".pushsection __bug_table,\"aw\"\n" \
".align 2\n" \
"3:\t.word 1b, 2b\n" \
"\t.hword " #__line ", 0\n" \
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index d69bebf..74504b1 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -116,7 +116,7 @@
void (*dma_unmap_area)(const void *, size_t, int);
void (*dma_flush_range)(const void *, const void *);
-};
+} __no_randomize_layout;
/*
* Select the calling method
diff --git a/arch/arm/include/asm/flat.h b/arch/arm/include/asm/flat.h
index acf1d14..29d3a15 100644
--- a/arch/arm/include/asm/flat.h
+++ b/arch/arm/include/asm/flat.h
@@ -5,12 +5,31 @@
#ifndef __ARM_FLAT_H__
#define __ARM_FLAT_H__
+#include <linux/uaccess.h>
+
#define flat_argvp_envp_on_stack() 1
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
-#define flat_get_addr_from_rp(rp, relval, flags, persistent) \
- ({ unsigned long __val; __get_user_unaligned(__val, rp); __val; })
-#define flat_put_addr_at_rp(rp, val, relval) __put_user_unaligned(val, rp)
+
+static inline int flat_get_addr_from_rp(u32 __user *rp, u32 relval, u32 flags,
+ u32 *addr, u32 *persistent)
+{
+#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+ return copy_from_user(addr, rp, 4) ? -EFAULT : 0;
+#else
+ return get_user(*addr, rp);
+#endif
+}
+
+static inline int flat_put_addr_at_rp(u32 __user *rp, u32 addr, u32 rel)
+{
+#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+ return copy_to_user(rp, &addr, 4) ? -EFAULT : 0;
+#else
+ return put_user(addr, rp);
+#endif
+}
+
#define flat_get_relocate_addr(rel) (rel)
#define flat_set_persistent(relval, p) 0
diff --git a/arch/arm/include/asm/kexec.h b/arch/arm/include/asm/kexec.h
index 1869af6..25021b7 100644
--- a/arch/arm/include/asm/kexec.h
+++ b/arch/arm/include/asm/kexec.h
@@ -19,6 +19,11 @@
#ifndef __ASSEMBLY__
+#define ARCH_HAS_KIMAGE_ARCH
+struct kimage_arch {
+ u32 kernel_r2;
+};
+
/**
* crash_setup_regs() - save registers for the panic kernel
* @newregs: registers are saved here
diff --git a/arch/arm/include/asm/kvm_hyp.h b/arch/arm/include/asm/kvm_hyp.h
index 5850890..14b5903 100644
--- a/arch/arm/include/asm/kvm_hyp.h
+++ b/arch/arm/include/asm/kvm_hyp.h
@@ -110,8 +110,8 @@
void __vgic_v3_save_state(struct kvm_vcpu *vcpu);
void __vgic_v3_restore_state(struct kvm_vcpu *vcpu);
-void asmlinkage __vfp_save_state(struct vfp_hard_struct *vfp);
-void asmlinkage __vfp_restore_state(struct vfp_hard_struct *vfp);
+asmlinkage void __vfp_save_state(struct vfp_hard_struct *vfp);
+asmlinkage void __vfp_restore_state(struct vfp_hard_struct *vfp);
static inline bool __vfp_enabled(void)
{
return !(read_sysreg(HCPTR) & (HCPTR_TCP(11) | HCPTR_TCP(10)));
@@ -120,8 +120,8 @@
void __hyp_text __banked_save_state(struct kvm_cpu_context *ctxt);
void __hyp_text __banked_restore_state(struct kvm_cpu_context *ctxt);
-int asmlinkage __guest_enter(struct kvm_vcpu *vcpu,
+asmlinkage int __guest_enter(struct kvm_vcpu *vcpu,
struct kvm_cpu_context *host);
-int asmlinkage __hyp_do_panic(const char *, int, u32);
+asmlinkage int __hyp_do_panic(const char *, int, u32);
#endif /* __ARM_KVM_HYP_H__ */
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index 6838abc..0bf2347 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -17,13 +17,6 @@
#include <asm/unified.h>
#include <asm/compiler.h>
-#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
-#include <asm-generic/uaccess-unaligned.h>
-#else
-#define __get_user_unaligned __get_user
-#define __put_user_unaligned __put_user
-#endif
-
#include <asm/extable.h>
/*
diff --git a/arch/arm/include/asm/ucontext.h b/arch/arm/include/asm/ucontext.h
index 14749ae..921d827 100644
--- a/arch/arm/include/asm/ucontext.h
+++ b/arch/arm/include/asm/ucontext.h
@@ -35,6 +35,12 @@
* bytes, to prevent unpredictable padding in the signal frame.
*/
+/*
+ * Dummy padding block: if this magic is encountered, the block should
+ * be skipped using the corresponding size field.
+ */
+#define DUMMY_MAGIC 0xb0d9ed01
+
#ifdef CONFIG_CRUNCH
#define CRUNCH_MAGIC 0x5065cf03
#define CRUNCH_STORAGE_SIZE (CRUNCH_SIZE + 8)
diff --git a/arch/arm/include/uapi/asm/Kbuild b/arch/arm/include/uapi/asm/Kbuild
index 5fb3368..8e17fe8 100644
--- a/arch/arm/include/uapi/asm/Kbuild
+++ b/arch/arm/include/uapi/asm/Kbuild
@@ -5,4 +5,18 @@
generated-y += unistd-oabi.h
generated-y += unistd-eabi.h
+generic-y += bitsperlong.h
+generic-y += errno.h
+generic-y += ioctl.h
+generic-y += ipcbuf.h
+generic-y += msgbuf.h
+generic-y += param.h
+generic-y += poll.h
+generic-y += resource.h
+generic-y += sembuf.h
+generic-y += shmbuf.h
generic-y += siginfo.h
+generic-y += socket.h
+generic-y += sockios.h
+generic-y += termbits.h
+generic-y += termios.h
diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
index 56dc1a3..c1809fb 100644
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@@ -480,7 +480,7 @@
ret = pcibios_init_resource(nr, sys, hw->io_optional);
if (ret) {
- kfree(sys);
+ pci_free_host_bridge(bridge);
break;
}
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index 1549588..fe1419e 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -30,7 +30,6 @@
static atomic_t waiting_for_crash_ipi;
-static unsigned long dt_mem;
/*
* Provide a dummy crash_notes definition while crash dump arrives to arm.
* This prevents breakage of crash_notes attribute in kernel/ksysfs.c.
@@ -42,6 +41,9 @@
__be32 header;
int i, err;
+ image->arch.kernel_r2 = image->start - KEXEC_ARM_ZIMAGE_OFFSET
+ + KEXEC_ARM_ATAGS_OFFSET;
+
/*
* Validate that if the current HW supports SMP, then the SW supports
* and implements CPU hotplug for the current HW. If not, we won't be
@@ -66,8 +68,8 @@
if (err)
return err;
- if (be32_to_cpu(header) == OF_DT_HEADER)
- dt_mem = current_segment->mem;
+ if (header == cpu_to_be32(OF_DT_HEADER))
+ image->arch.kernel_r2 = current_segment->mem;
}
return 0;
}
@@ -165,8 +167,7 @@
kexec_start_address = image->start;
kexec_indirection_page = page_list;
kexec_mach_type = machine_arch_type;
- kexec_boot_atags = dt_mem ?: image->start - KEXEC_ARM_ZIMAGE_OFFSET
- + KEXEC_ARM_ATAGS_OFFSET;
+ kexec_boot_atags = image->arch.kernel_r2;
/* copy our kernel relocation code to the control code page */
reboot_entry = fncpy(reboot_code_buffer,
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 4e80bf7..8e9a3e4 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -987,6 +987,9 @@
if (crash_base <= 0) {
unsigned long long crash_max = idmap_to_phys((u32)~0);
+ unsigned long long lowmem_max = __pa(high_memory - 1) + 1;
+ if (crash_max > lowmem_max)
+ crash_max = lowmem_max;
crash_base = memblock_find_in_range(CRASH_ALIGN, crash_max,
crash_size, CRASH_ALIGN);
if (!crash_base) {
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 7b8f214..5814298 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -40,8 +40,10 @@
return __copy_to_user(frame, kframe, sizeof(*frame));
}
-static int restore_crunch_context(struct crunch_sigframe __user *frame)
+static int restore_crunch_context(char __user **auxp)
{
+ struct crunch_sigframe __user *frame =
+ (struct crunch_sigframe __user *)*auxp;
char kbuf[sizeof(*frame) + 8];
struct crunch_sigframe *kframe;
@@ -52,6 +54,7 @@
if (kframe->magic != CRUNCH_MAGIC ||
kframe->size != CRUNCH_STORAGE_SIZE)
return -1;
+ *auxp += CRUNCH_STORAGE_SIZE;
crunch_task_restore(current_thread_info(), &kframe->storage);
return 0;
}
@@ -59,21 +62,39 @@
#ifdef CONFIG_IWMMXT
-static int preserve_iwmmxt_context(struct iwmmxt_sigframe *frame)
+static int preserve_iwmmxt_context(struct iwmmxt_sigframe __user *frame)
{
char kbuf[sizeof(*frame) + 8];
struct iwmmxt_sigframe *kframe;
+ int err = 0;
/* the iWMMXt context must be 64 bit aligned */
kframe = (struct iwmmxt_sigframe *)((unsigned long)(kbuf + 8) & ~7);
- kframe->magic = IWMMXT_MAGIC;
- kframe->size = IWMMXT_STORAGE_SIZE;
- iwmmxt_task_copy(current_thread_info(), &kframe->storage);
- return __copy_to_user(frame, kframe, sizeof(*frame));
+
+ if (test_thread_flag(TIF_USING_IWMMXT)) {
+ kframe->magic = IWMMXT_MAGIC;
+ kframe->size = IWMMXT_STORAGE_SIZE;
+ iwmmxt_task_copy(current_thread_info(), &kframe->storage);
+
+ err = __copy_to_user(frame, kframe, sizeof(*frame));
+ } else {
+ /*
+ * For bug-compatibility with older kernels, some space
+ * has to be reserved for iWMMXt even if it's not used.
+ * Set the magic and size appropriately so that properly
+ * written userspace can skip it reliably:
+ */
+ __put_user_error(DUMMY_MAGIC, &frame->magic, err);
+ __put_user_error(IWMMXT_STORAGE_SIZE, &frame->size, err);
+ }
+
+ return err;
}
-static int restore_iwmmxt_context(struct iwmmxt_sigframe *frame)
+static int restore_iwmmxt_context(char __user **auxp)
{
+ struct iwmmxt_sigframe __user *frame =
+ (struct iwmmxt_sigframe __user *)*auxp;
char kbuf[sizeof(*frame) + 8];
struct iwmmxt_sigframe *kframe;
@@ -81,10 +102,28 @@
kframe = (struct iwmmxt_sigframe *)((unsigned long)(kbuf + 8) & ~7);
if (__copy_from_user(kframe, frame, sizeof(*frame)))
return -1;
- if (kframe->magic != IWMMXT_MAGIC ||
- kframe->size != IWMMXT_STORAGE_SIZE)
+
+ /*
+ * For non-iWMMXt threads: a single iwmmxt_sigframe-sized dummy
+ * block is discarded for compatibility with setup_sigframe() if
+ * present, but we don't mandate its presence. If some other
+ * magic is here, it's not for us:
+ */
+ if (!test_thread_flag(TIF_USING_IWMMXT) &&
+ kframe->magic != DUMMY_MAGIC)
+ return 0;
+
+ if (kframe->size != IWMMXT_STORAGE_SIZE)
return -1;
- iwmmxt_task_restore(current_thread_info(), &kframe->storage);
+
+ if (test_thread_flag(TIF_USING_IWMMXT)) {
+ if (kframe->magic != IWMMXT_MAGIC)
+ return -1;
+
+ iwmmxt_task_restore(current_thread_info(), &kframe->storage);
+ }
+
+ *auxp += IWMMXT_STORAGE_SIZE;
return 0;
}
@@ -107,8 +146,10 @@
return vfp_preserve_user_clear_hwstate(&frame->ufp, &frame->ufp_exc);
}
-static int restore_vfp_context(struct vfp_sigframe __user *frame)
+static int restore_vfp_context(char __user **auxp)
{
+ struct vfp_sigframe __user *frame =
+ (struct vfp_sigframe __user *)*auxp;
unsigned long magic;
unsigned long size;
int err = 0;
@@ -121,6 +162,7 @@
if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE)
return -EINVAL;
+ *auxp += size;
return vfp_restore_user_hwstate(&frame->ufp, &frame->ufp_exc);
}
@@ -141,7 +183,7 @@
static int restore_sigframe(struct pt_regs *regs, struct sigframe __user *sf)
{
- struct aux_sigframe __user *aux;
+ char __user *aux;
sigset_t set;
int err;
@@ -169,18 +211,18 @@
err |= !valid_user_regs(regs);
- aux = (struct aux_sigframe __user *) sf->uc.uc_regspace;
+ aux = (char __user *) sf->uc.uc_regspace;
#ifdef CONFIG_CRUNCH
if (err == 0)
- err |= restore_crunch_context(&aux->crunch);
+ err |= restore_crunch_context(&aux);
#endif
#ifdef CONFIG_IWMMXT
- if (err == 0 && test_thread_flag(TIF_USING_IWMMXT))
- err |= restore_iwmmxt_context(&aux->iwmmxt);
+ if (err == 0)
+ err |= restore_iwmmxt_context(&aux);
#endif
#ifdef CONFIG_VFP
if (err == 0)
- err |= restore_vfp_context(&aux->vfp);
+ err |= restore_vfp_context(&aux);
#endif
return err;
@@ -286,7 +328,7 @@
err |= preserve_crunch_context(&aux->crunch);
#endif
#ifdef CONFIG_IWMMXT
- if (err == 0 && test_thread_flag(TIF_USING_IWMMXT))
+ if (err == 0)
err |= preserve_iwmmxt_context(&aux->iwmmxt);
#endif
#ifdef CONFIG_VFP
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index b5625d0..e568c8c 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -1166,7 +1166,7 @@
#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
-static const struct vpif_input da850_ch0_inputs[] = {
+static struct vpif_input da850_ch0_inputs[] = {
{
.input = {
.index = 0,
@@ -1181,7 +1181,7 @@
},
};
-static const struct vpif_input da850_ch1_inputs[] = {
+static struct vpif_input da850_ch1_inputs[] = {
{
.input = {
.index = 0,
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index f5dce9b..f77a4f7 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -218,6 +218,15 @@
}
EXPORT_SYMBOL(clk_set_parent);
+struct clk *clk_get_parent(struct clk *clk)
+{
+ if (!clk)
+ return NULL;
+
+ return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
int clk_register(struct clk *clk)
{
if (clk == NULL || IS_ERR(clk))
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 39ef3b6..beec5f1 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -475,6 +475,26 @@
}
EXPORT_SYMBOL(clk_set_rate);
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ WARN_ON(clk);
+ return 0;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ WARN_ON(clk);
+ return 0;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+ return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
static char fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 };
static char hclk_divisors[] = { 1, 2, 4, 5, 6, 8, 16, 32 };
diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h
index 7a0c13b..844e8ac 100644
--- a/arch/arm/mach-ixp4xx/include/mach/io.h
+++ b/arch/arm/mach-ixp4xx/include/mach/io.h
@@ -95,8 +95,10 @@
}
static inline void __indirect_writesb(volatile void __iomem *bus_addr,
- const u8 *vaddr, int count)
+ const void *p, int count)
{
+ const u8 *vaddr = p;
+
while (count--)
writeb(*vaddr++, bus_addr);
}
@@ -118,8 +120,10 @@
}
static inline void __indirect_writesw(volatile void __iomem *bus_addr,
- const u16 *vaddr, int count)
+ const void *p, int count)
{
+ const u16 *vaddr = p;
+
while (count--)
writew(*vaddr++, bus_addr);
}
@@ -137,8 +141,9 @@
}
static inline void __indirect_writesl(volatile void __iomem *bus_addr,
- const u32 *vaddr, int count)
+ const void *p, int count)
{
+ const u32 *vaddr = p;
while (count--)
writel(*vaddr++, bus_addr);
}
@@ -160,8 +165,10 @@
}
static inline void __indirect_readsb(const volatile void __iomem *bus_addr,
- u8 *vaddr, u32 count)
+ void *p, u32 count)
{
+ u8 *vaddr = p;
+
while (count--)
*vaddr++ = readb(bus_addr);
}
@@ -183,8 +190,10 @@
}
static inline void __indirect_readsw(const volatile void __iomem *bus_addr,
- u16 *vaddr, u32 count)
+ void *p, u32 count)
{
+ u16 *vaddr = p;
+
while (count--)
*vaddr++ = readw(bus_addr);
}
@@ -204,8 +213,10 @@
}
static inline void __indirect_readsl(const volatile void __iomem *bus_addr,
- u32 *vaddr, u32 count)
+ void *p, u32 count)
{
+ u32 *vaddr = p;
+
while (count--)
*vaddr++ = readl(bus_addr);
}
@@ -523,8 +534,15 @@
#endif
}
-#define ioport_map(port, nr) ((void __iomem*)(port + PIO_OFFSET))
-#define ioport_unmap(addr)
+#define ioport_map(port, nr) ioport_map(port, nr)
+static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
+{
+ return ((void __iomem*)((port) + PIO_OFFSET));
+}
+#define ioport_unmap(addr) ioport_unmap(addr)
+static inline void ioport_unmap(void __iomem *addr)
+{
+}
#endif /* CONFIG_PCI */
#endif /* __ASM_ARM_ARCH_IO_H */
diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c
index 3330ac7..671c7a0 100644
--- a/arch/arm/mach-mmp/devices.c
+++ b/arch/arm/mach-mmp/devices.c
@@ -238,7 +238,7 @@
#endif
#if IS_ENABLED(CONFIG_USB_SUPPORT)
-static u64 usb_dma_mask = ~(u32)0;
+static u64 __maybe_unused usb_dma_mask = ~(u32)0;
#if IS_ENABLED(CONFIG_USB_MV_UDC)
struct resource pxa168_u2o_resources[] = {
diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c
index e62273a..4ffbbd2 100644
--- a/arch/arm/mach-mvebu/platsmp.c
+++ b/arch/arm/mach-mvebu/platsmp.c
@@ -211,7 +211,7 @@
return PTR_ERR(base);
writel(0, base + MV98DX3236_CPU_RESUME_CTRL_REG);
- writel(virt_to_phys(boot_addr), base + MV98DX3236_CPU_RESUME_ADDR_REG);
+ writel(__pa_symbol(boot_addr), base + MV98DX3236_CPU_RESUME_ADDR_REG);
iounmap(base);
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 6613a6f..6cbc69c 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -510,6 +510,7 @@
static void modem_pm(struct uart_port *port, unsigned int state, unsigned old)
{
struct modem_private_data *priv = port->private_data;
+ int ret;
if (IS_ERR(priv->regulator))
return;
@@ -518,9 +519,16 @@
return;
if (state == 0)
- regulator_enable(priv->regulator);
+ ret = regulator_enable(priv->regulator);
else if (old == 0)
- regulator_disable(priv->regulator);
+ ret = regulator_disable(priv->regulator);
+ else
+ ret = 0;
+
+ if (ret)
+ dev_warn(port->dev,
+ "ams_delta modem_pm: failed to %sable regulator: %d\n",
+ state ? "dis" : "en", ret);
}
static struct plat_serial8250_port ams_delta_modem_ports[] = {
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 4dfb995..95ac192 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -441,13 +441,11 @@
.chip_select = 0,
} };
-#ifdef CONFIG_PM
static irqreturn_t
osk_mistral_wake_interrupt(int irq, void *ignored)
{
return IRQ_HANDLED;
}
-#endif
static void __init osk_mistral_init(void)
{
@@ -515,7 +513,6 @@
gpio_direction_input(OMAP_MPUIO(2));
irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
-#ifdef CONFIG_PM
/* share the IRQ in case someone wants to use the
* button for more than wakeup from system sleep.
*/
@@ -529,7 +526,6 @@
ret);
} else
enable_irq_wake(irq);
-#endif
} else
printk(KERN_ERR "OSK+Mistral: wakeup button is awol\n");
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index dc9e34e..b1e661b 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -28,7 +28,7 @@
{ }
};
-static void __init omap_generic_init(void)
+static void __init __maybe_unused omap_generic_init(void)
{
pdata_quirks_init(omap_dt_match_table);
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index be517b0..5b61438 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -32,120 +32,6 @@
#define HSMMC_NAME_LEN 9
-static void omap_hsmmc1_before_set_reg(struct device *dev,
- int power_on, int vdd)
-{
- u32 reg, prog_io;
- struct omap_hsmmc_platform_data *mmc = dev->platform_data;
-
- if (mmc->remux)
- mmc->remux(dev, power_on);
-
- /*
- * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
- * card with Vcc regulator (from twl4030 or whatever). OMAP has both
- * 1.8V and 3.0V modes, controlled by the PBIAS register.
- *
- * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which
- * is most naturally TWL VSIM; those pins also use PBIAS.
- *
- * FIXME handle VMMC1A as needed ...
- */
- if (power_on) {
- if (cpu_is_omap2430()) {
- reg = omap_ctrl_readl(OMAP243X_CONTROL_DEVCONF1);
- if ((1 << vdd) >= MMC_VDD_30_31)
- reg |= OMAP243X_MMC1_ACTIVE_OVERWRITE;
- else
- reg &= ~OMAP243X_MMC1_ACTIVE_OVERWRITE;
- omap_ctrl_writel(reg, OMAP243X_CONTROL_DEVCONF1);
- }
-
- if (mmc->internal_clock) {
- reg = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
- reg |= OMAP2_MMCSDIO1ADPCLKISEL;
- omap_ctrl_writel(reg, OMAP2_CONTROL_DEVCONF0);
- }
-
- reg = omap_ctrl_readl(control_pbias_offset);
- if (cpu_is_omap3630()) {
- /* Set MMC I/O to 52MHz */
- prog_io = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1);
- prog_io |= OMAP3630_PRG_SDMMC1_SPEEDCTRL;
- omap_ctrl_writel(prog_io, OMAP343X_CONTROL_PROG_IO1);
- } else {
- reg |= OMAP2_PBIASSPEEDCTRL0;
- }
- reg &= ~OMAP2_PBIASLITEPWRDNZ0;
- omap_ctrl_writel(reg, control_pbias_offset);
- } else {
- reg = omap_ctrl_readl(control_pbias_offset);
- reg &= ~OMAP2_PBIASLITEPWRDNZ0;
- omap_ctrl_writel(reg, control_pbias_offset);
- }
-}
-
-static void omap_hsmmc1_after_set_reg(struct device *dev, int power_on, int vdd)
-{
- u32 reg;
-
- /* 100ms delay required for PBIAS configuration */
- msleep(100);
-
- if (power_on) {
- reg = omap_ctrl_readl(control_pbias_offset);
- reg |= (OMAP2_PBIASLITEPWRDNZ0 | OMAP2_PBIASSPEEDCTRL0);
- if ((1 << vdd) <= MMC_VDD_165_195)
- reg &= ~OMAP2_PBIASLITEVMODE0;
- else
- reg |= OMAP2_PBIASLITEVMODE0;
- omap_ctrl_writel(reg, control_pbias_offset);
- } else {
- reg = omap_ctrl_readl(control_pbias_offset);
- reg |= (OMAP2_PBIASSPEEDCTRL0 | OMAP2_PBIASLITEPWRDNZ0 |
- OMAP2_PBIASLITEVMODE0);
- omap_ctrl_writel(reg, control_pbias_offset);
- }
-}
-
-static void hsmmc2_select_input_clk_src(struct omap_hsmmc_platform_data *mmc)
-{
- u32 reg;
-
- reg = omap_ctrl_readl(control_devconf1_offset);
- if (mmc->internal_clock)
- reg |= OMAP2_MMCSDIO2ADPCLKISEL;
- else
- reg &= ~OMAP2_MMCSDIO2ADPCLKISEL;
- omap_ctrl_writel(reg, control_devconf1_offset);
-}
-
-static void hsmmc2_before_set_reg(struct device *dev, int power_on, int vdd)
-{
- struct omap_hsmmc_platform_data *mmc = dev->platform_data;
-
- if (mmc->remux)
- mmc->remux(dev, power_on);
-
- if (power_on)
- hsmmc2_select_input_clk_src(mmc);
-}
-
-static int am35x_hsmmc2_set_power(struct device *dev, int power_on, int vdd)
-{
- struct omap_hsmmc_platform_data *mmc = dev->platform_data;
-
- if (power_on)
- hsmmc2_select_input_clk_src(mmc);
-
- return 0;
-}
-
-static int nop_mmc_set_power(struct device *dev, int power_on, int vdd)
-{
- return 0;
-}
-
static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
struct omap_hsmmc_platform_data *mmc)
{
@@ -157,101 +43,11 @@
return -ENOMEM;
}
- if (c->name)
- strncpy(hc_name, c->name, HSMMC_NAME_LEN);
- else
- snprintf(hc_name, (HSMMC_NAME_LEN + 1), "mmc%islot%i",
- c->mmc, 1);
+ snprintf(hc_name, (HSMMC_NAME_LEN + 1), "mmc%islot%i", c->mmc, 1);
mmc->name = hc_name;
mmc->caps = c->caps;
- mmc->internal_clock = !c->ext_clock;
mmc->reg_offset = 0;
- if (c->cover_only) {
- /* detect if mobile phone cover removed */
- mmc->gpio_cd = -EINVAL;
- mmc->gpio_cod = c->gpio_cd;
- } else {
- /* card detect pin on the mmc socket itself */
- mmc->gpio_cd = c->gpio_cd;
- mmc->gpio_cod = -EINVAL;
- }
- mmc->gpio_wp = c->gpio_wp;
-
- mmc->remux = c->remux;
- mmc->init_card = c->init_card;
-
- if (c->nonremovable)
- mmc->nonremovable = 1;
-
- /*
- * NOTE: MMC slots should have a Vcc regulator set up.
- * This may be from a TWL4030-family chip, another
- * controllable regulator, or a fixed supply.
- *
- * temporary HACK: ocr_mask instead of fixed supply
- */
- if (soc_is_am35xx())
- mmc->ocr_mask = MMC_VDD_165_195 |
- MMC_VDD_26_27 |
- MMC_VDD_27_28 |
- MMC_VDD_29_30 |
- MMC_VDD_30_31 |
- MMC_VDD_31_32;
- else
- mmc->ocr_mask = c->ocr_mask;
-
- if (!soc_is_am35xx())
- mmc->features |= HSMMC_HAS_PBIAS;
-
- switch (c->mmc) {
- case 1:
- if (mmc->features & HSMMC_HAS_PBIAS) {
- /* on-chip level shifting via PBIAS0/PBIAS1 */
- mmc->before_set_reg =
- omap_hsmmc1_before_set_reg;
- mmc->after_set_reg =
- omap_hsmmc1_after_set_reg;
- }
-
- if (soc_is_am35xx())
- mmc->set_power = nop_mmc_set_power;
-
- /* OMAP3630 HSMMC1 supports only 4-bit */
- if (cpu_is_omap3630() &&
- (c->caps & MMC_CAP_8_BIT_DATA)) {
- c->caps &= ~MMC_CAP_8_BIT_DATA;
- c->caps |= MMC_CAP_4_BIT_DATA;
- mmc->caps = c->caps;
- }
- break;
- case 2:
- if (soc_is_am35xx())
- mmc->set_power = am35x_hsmmc2_set_power;
-
- if (c->ext_clock)
- c->transceiver = 1;
- if (c->transceiver && (c->caps & MMC_CAP_8_BIT_DATA)) {
- c->caps &= ~MMC_CAP_8_BIT_DATA;
- c->caps |= MMC_CAP_4_BIT_DATA;
- }
- if (mmc->features & HSMMC_HAS_PBIAS) {
- /* off-chip level shifting, or none */
- mmc->before_set_reg = hsmmc2_before_set_reg;
- mmc->after_set_reg = NULL;
- }
- break;
- case 3:
- case 4:
- case 5:
- mmc->before_set_reg = NULL;
- mmc->after_set_reg = NULL;
- break;
- default:
- pr_err("MMC%d configuration not supported!\n", c->mmc);
- kfree(hc_name);
- return -ENODEV;
- }
return 0;
}
@@ -260,7 +56,6 @@
void omap_hsmmc_late_init(struct omap2_hsmmc_info *c)
{
struct platform_device *pdev;
- struct omap_hsmmc_platform_data *mmc_pdata;
int res;
if (omap_hsmmc_done != 1)
@@ -269,32 +64,12 @@
omap_hsmmc_done++;
for (; c->mmc; c++) {
- if (!c->deferred)
- continue;
-
pdev = c->pdev;
if (!pdev)
continue;
-
- mmc_pdata = pdev->dev.platform_data;
- if (!mmc_pdata)
- continue;
-
- if (c->cover_only) {
- /* detect if mobile phone cover removed */
- mmc_pdata->gpio_cd = -EINVAL;
- mmc_pdata->gpio_cod = c->gpio_cd;
- } else {
- /* card detect pin on the mmc socket itself */
- mmc_pdata->gpio_cd = c->gpio_cd;
- mmc_pdata->gpio_cod = -EINVAL;
- }
- mmc_pdata->gpio_wp = c->gpio_wp;
-
res = omap_device_register(pdev);
if (res)
- pr_err("Could not late init MMC %s\n",
- c->name);
+ pr_err("Could not late init MMC\n");
}
}
@@ -336,13 +111,6 @@
if (oh->dev_attr != NULL) {
mmc_dev_attr = oh->dev_attr;
mmc_data->controller_flags = mmc_dev_attr->flags;
- /*
- * erratum 2.1.1.128 doesn't apply if board has
- * a transceiver is attached
- */
- if (hsmmcinfo->transceiver)
- mmc_data->controller_flags &=
- ~OMAP_HSMMC_BROKEN_MULTIBLOCK_READ;
}
pdev = platform_device_alloc(name, ctrl_nr - 1);
@@ -367,9 +135,6 @@
hsmmcinfo->pdev = pdev;
- if (hsmmcinfo->deferred)
- goto free_mmc;
-
res = omap_device_register(pdev);
if (res) {
pr_err("Could not register od for %s\n", name);
diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h
index 69b619d..af9af50 100644
--- a/arch/arm/mach-omap2/hsmmc.h
+++ b/arch/arm/mach-omap2/hsmmc.h
@@ -12,18 +12,9 @@
u8 mmc; /* controller 1/2/3 */
u32 caps; /* 4/8 wires and any additional host
* capabilities OR'd (ref. linux/mmc/host.h) */
- bool transceiver; /* MMC-2 option */
- bool ext_clock; /* use external pin for input clock */
- bool cover_only; /* No card detect - just cover switch */
- bool nonremovable; /* Nonremovable e.g. eMMC */
- bool deferred; /* mmc needs a deferred probe */
int gpio_cd; /* or -EINVAL */
int gpio_wp; /* or -EINVAL */
- char *name; /* or NULL for default */
struct platform_device *pdev; /* mmc controller instance */
- int ocr_mask; /* temporary HACK */
- /* Remux (pad configuration) when powering on/off */
- void (*remux)(struct device *dev, int power_on);
/* init some special card */
void (*init_card)(struct mmc_card *card);
};
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 1d739d1..1cd20e4 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -410,7 +410,7 @@
return omap_hwmod_set_postsetup_state(oh, *(u8 *)data);
}
-static void __init omap_hwmod_init_postsetup(void)
+static void __init __maybe_unused omap_hwmod_init_postsetup(void)
{
u8 postsetup_state;
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index d44e0e2..841ba19 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -486,7 +486,6 @@
ret = request_irq(omap_prcm_event_to_irq("io"),
_prcm_int_handle_io, IRQF_SHARED | IRQF_NO_SUSPEND, "pm_io",
omap3_pm_init);
- enable_irq(omap_prcm_event_to_irq("io"));
if (ret) {
pr_err("pm: Failed to request pm_io irq\n");
diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c
index 382e236..64f6451 100644
--- a/arch/arm/mach-omap2/prm3xxx.c
+++ b/arch/arm/mach-omap2/prm3xxx.c
@@ -692,7 +692,6 @@
{
struct device_node *np;
int irq_num;
- int ret;
if (!(prm_features & PRM_HAS_IO_WAKEUP))
return 0;
@@ -712,12 +711,8 @@
}
omap3xxx_prm_enable_io_wakeup();
- ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
- if (!ret)
- irq_set_status_flags(omap_prcm_event_to_irq("io"),
- IRQ_NOAUTOEN);
- return ret;
+ return omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
}
static void __exit omap3xxx_prm_exit(void)
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index 87e86a4..3ab5df1 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -337,6 +337,27 @@
}
/**
+ * omap44xx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches
+ *
+ * Activates the I/O wakeup event latches and allows events logged by
+ * those latches to signal a wakeup event to the PRCM. For I/O wakeups
+ * to occur, WAKEUPENABLE bits must be set in the pad mux registers, and
+ * omap44xx_prm_reconfigure_io_chain() must be called. No return value.
+ */
+static void __init omap44xx_prm_enable_io_wakeup(void)
+{
+ s32 inst = omap4_prmst_get_prm_dev_inst();
+
+ if (inst == PRM_INSTANCE_UNKNOWN)
+ return;
+
+ omap4_prm_rmw_inst_reg_bits(OMAP4430_GLOBAL_WUEN_MASK,
+ OMAP4430_GLOBAL_WUEN_MASK,
+ inst,
+ omap4_prcm_irq_setup.pm_ctrl);
+}
+
+/**
* omap44xx_prm_read_reset_sources - return the last SoC reset source
*
* Return a u32 representing the last reset sources of the SoC. The
@@ -668,6 +689,8 @@
.pwrdm_has_voltdm = omap4_check_vcvp,
};
+static int omap44xx_prm_late_init(void);
+
/*
* XXX document
*/
@@ -675,6 +698,7 @@
.read_reset_sources = &omap44xx_prm_read_reset_sources,
.was_any_context_lost_old = &omap44xx_prm_was_any_context_lost_old,
.clear_context_loss_flags_old = &omap44xx_prm_clear_context_loss_flags_old,
+ .late_init = &omap44xx_prm_late_init,
.assert_hardreset = omap4_prminst_assert_hardreset,
.deassert_hardreset = omap4_prminst_deassert_hardreset,
.is_hardreset_asserted = omap4_prminst_is_hardreset_asserted,
@@ -711,6 +735,37 @@
return prm_register(&omap44xx_prm_ll_data);
}
+static int omap44xx_prm_late_init(void)
+{
+ int irq_num;
+
+ if (!(prm_features & PRM_HAS_IO_WAKEUP))
+ return 0;
+
+ irq_num = of_irq_get(prm_init_data->np, 0);
+ /*
+ * Already have OMAP4 IRQ num. For all other platforms, we need
+ * IRQ numbers from DT
+ */
+ if (irq_num < 0 && !(prm_init_data->flags & PRM_IRQ_DEFAULT)) {
+ if (irq_num == -EPROBE_DEFER)
+ return irq_num;
+
+ /* Have nothing to do */
+ return 0;
+ }
+
+ /* Once OMAP4 DT is filled as well */
+ if (irq_num >= 0) {
+ omap4_prcm_irq_setup.irq = irq_num;
+ omap4_prcm_irq_setup.xlate_irq = NULL;
+ }
+
+ omap44xx_prm_enable_io_wakeup();
+
+ return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup);
+}
+
static void __exit omap44xx_prm_exit(void)
{
prm_unregister(&omap44xx_prm_ll_data);
diff --git a/arch/arm/mach-prima2/common.c b/arch/arm/mach-prima2/common.c
index 8cadb30..ffe05c2 100644
--- a/arch/arm/mach-prima2/common.c
+++ b/arch/arm/mach-prima2/common.c
@@ -15,7 +15,7 @@
#include <linux/of_platform.h>
#include "common.h"
-static void __init sirfsoc_init_late(void)
+static void __init __maybe_unused sirfsoc_init_late(void)
{
sirfsoc_pm_init();
}
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 76fbc11..ce7d97b 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -566,6 +566,7 @@
config ARCH_PXA_ESERIES
bool "PXA based Toshiba e-series PDAs"
select FB_W100
+ select FB
select PXA25x
config MACH_E330
diff --git a/arch/arm/mach-pxa/include/mach/mtd-xip.h b/arch/arm/mach-pxa/include/mach/mtd-xip.h
index 990d2bf..9bf4ea6 100644
--- a/arch/arm/mach-pxa/include/mach/mtd-xip.h
+++ b/arch/arm/mach-pxa/include/mach/mtd-xip.h
@@ -17,11 +17,15 @@
#include <mach/regs-ost.h>
-#define xip_irqpending() (ICIP & ICMR)
+/* restored July 2017, this did not build since 2011! */
+
+#define ICIP io_p2v(0x40d00000)
+#define ICMR io_p2v(0x40d00004)
+#define xip_irqpending() (readl(ICIP) & readl(ICMR))
/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */
-#define xip_currtime() (OSCR)
-#define xip_elapsed_since(x) (signed)((OSCR - (x)) / 4)
+#define xip_currtime() readl(OSCR)
+#define xip_elapsed_since(x) (signed)((readl(OSCR) - (x)) / 4)
/*
* xip_cpu_idle() is used when waiting for a delay equal or larger than
diff --git a/arch/arm/mach-rpc/include/mach/hardware.h b/arch/arm/mach-rpc/include/mach/hardware.h
index aa79fa4..622d4e5 100644
--- a/arch/arm/mach-rpc/include/mach/hardware.h
+++ b/arch/arm/mach-rpc/include/mach/hardware.h
@@ -25,8 +25,8 @@
* *_SIZE is the size of the region
* *_BASE is the virtual address
*/
-#define RAM_SIZE 0x10000000
-#define RAM_START 0x10000000
+#define RPC_RAM_SIZE 0x10000000
+#define RPC_RAM_START 0x10000000
#define EASI_SIZE 0x08000000 /* EASI I/O */
#define EASI_START 0x08000000
diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c
index 0db4689..7d52cd9 100644
--- a/arch/arm/mach-sa1100/clock.c
+++ b/arch/arm/mach-sa1100/clock.c
@@ -35,6 +35,31 @@
static DEFINE_SPINLOCK(clocks_lock);
+/* Dummy clk routine to build generic kernel parts that may be using them */
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ return clk_get_rate(clk);
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ return 0;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ return 0;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+ return NULL;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
static void clk_gpio27_enable(struct clk *clk)
{
/*
diff --git a/arch/arm/mach-sa1100/include/mach/mtd-xip.h b/arch/arm/mach-sa1100/include/mach/mtd-xip.h
index b3d6840..cb76096 100644
--- a/arch/arm/mach-sa1100/include/mach/mtd-xip.h
+++ b/arch/arm/mach-sa1100/include/mach/mtd-xip.h
@@ -20,7 +20,7 @@
#define xip_irqpending() (ICIP & ICMR)
/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */
-#define xip_currtime() (OSCR)
-#define xip_elapsed_since(x) (signed)((OSCR - (x)) / 4)
+#define xip_currtime() readl_relaxed(OSCR)
+#define xip_elapsed_since(x) (signed)((readl_relaxed(OSCR) - (x)) / 4)
#endif /* __ARCH_SA1100_MTD_XIP_H__ */
diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c
index b143c46..7fc11a3 100644
--- a/arch/arm/mach-sa1100/jornada720_ssp.c
+++ b/arch/arm/mach-sa1100/jornada720_ssp.c
@@ -33,7 +33,7 @@
* we need to reverse all data we receive from the mcu due to its physical location
* returns : 01110111 -> 11101110
*/
-u8 inline jornada_ssp_reverse(u8 byte)
+inline u8 jornada_ssp_reverse(u8 byte)
{
return
((0x80 & byte) >> 7) |
diff --git a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
index 73e3adb..44438f3 100644
--- a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
@@ -67,8 +67,12 @@
{
struct device *dev = data;
struct i2c_client *client;
+ static bool done;
u32 mon;
+ if (done)
+ return 0;
+
mon = ioread32(irqc + IRQC_MONITOR);
dev_dbg(dev, "%s: %ld, IRQC_MONITOR = 0x%x\n", __func__, action, mon);
if (mon & REGULATOR_IRQ_MASK)
@@ -99,7 +103,7 @@
remove:
dev_info(dev, "IRQ2 is not asserted, removing quirk\n");
- bus_unregister_notifier(&i2c_bus_type, nb);
+ done = true;
iounmap(irqc);
return 0;
}
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 28083ef..71a34e8 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -133,6 +133,7 @@
static struct arm_pmu_platdata db8500_pmu_platdata = {
.handle_irq = db8500_pmu_handler,
+ .irq_flags = IRQF_NOBALANCING | IRQF_NO_THREAD,
};
static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
diff --git a/arch/arm/mach-w90x900/clock.c b/arch/arm/mach-w90x900/clock.c
index ac6fd1a..3f93fac 100644
--- a/arch/arm/mach-w90x900/clock.c
+++ b/arch/arm/mach-w90x900/clock.c
@@ -93,3 +93,32 @@
__raw_writel(clken, W90X900_VA_CLKPWR + SUBCLK);
}
+
+/* dummy functions, should not be called */
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ WARN_ON(clk);
+ return 0;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ WARN_ON(clk);
+ return 0;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ WARN_ON(clk);
+ return 0;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+ WARN_ON(clk);
+ return NULL;
+}
+EXPORT_SYMBOL(clk_get_parent);
diff --git a/arch/arm/mm/dma-mapping-nommu.c b/arch/arm/mm/dma-mapping-nommu.c
index 90ee354..6db5fc2 100644
--- a/arch/arm/mm/dma-mapping-nommu.c
+++ b/arch/arm/mm/dma-mapping-nommu.c
@@ -40,9 +40,21 @@
{
const struct dma_map_ops *ops = &dma_noop_ops;
+ void *ret;
/*
- * We are here because:
+ * Try generic allocator first if we are advertised that
+ * consistency is not required.
+ */
+
+ if (attrs & DMA_ATTR_NON_CONSISTENT)
+ return ops->alloc(dev, size, dma_handle, gfp, attrs);
+
+ ret = dma_alloc_from_global_coherent(size, dma_handle);
+
+ /*
+ * dma_alloc_from_global_coherent() may fail because:
+ *
* - no consistent DMA region has been defined, so we can't
* continue.
* - there is no space left in consistent DMA region, so we
@@ -50,11 +62,8 @@
* advertised that consistency is not required.
*/
- if (attrs & DMA_ATTR_NON_CONSISTENT)
- return ops->alloc(dev, size, dma_handle, gfp, attrs);
-
- WARN_ON_ONCE(1);
- return NULL;
+ WARN_ON_ONCE(ret == NULL);
+ return ret;
}
static void arm_nommu_dma_free(struct device *dev, size_t size,
@@ -63,14 +72,31 @@
{
const struct dma_map_ops *ops = &dma_noop_ops;
- if (attrs & DMA_ATTR_NON_CONSISTENT)
+ if (attrs & DMA_ATTR_NON_CONSISTENT) {
ops->free(dev, size, cpu_addr, dma_addr, attrs);
- else
- WARN_ON_ONCE(1);
+ } else {
+ int ret = dma_release_from_global_coherent(get_order(size),
+ cpu_addr);
+
+ WARN_ON_ONCE(ret == 0);
+ }
return;
}
+static int arm_nommu_dma_mmap(struct device *dev, struct vm_area_struct *vma,
+ void *cpu_addr, dma_addr_t dma_addr, size_t size,
+ unsigned long attrs)
+{
+ int ret;
+
+ if (dma_mmap_from_global_coherent(vma, cpu_addr, size, &ret))
+ return ret;
+
+ return dma_common_mmap(dev, vma, cpu_addr, dma_addr, size);
+}
+
+
static void __dma_page_cpu_to_dev(phys_addr_t paddr, size_t size,
enum dma_data_direction dir)
{
@@ -173,6 +199,7 @@
const struct dma_map_ops arm_nommu_dma_ops = {
.alloc = arm_nommu_dma_alloc,
.free = arm_nommu_dma_free,
+ .mmap = arm_nommu_dma_mmap,
.map_page = arm_nommu_dma_map_page,
.unmap_page = arm_nommu_dma_unmap_page,
.map_sg = arm_nommu_dma_map_sg,
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index e7380ba..fcf1473 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -851,7 +851,7 @@
unsigned long pfn = dma_to_pfn(dev, dma_addr);
unsigned long off = vma->vm_pgoff;
- if (dma_mmap_from_coherent(dev, vma, cpu_addr, size, &ret))
+ if (dma_mmap_from_dev_coherent(dev, vma, cpu_addr, size, &ret))
return ret;
if (off < nr_pages && nr_vma_pages <= (nr_pages - off)) {
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 8addb85..dfd9086 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -12,6 +12,7 @@
select ARCH_HAS_DEVMEM_IS_ALLOWED
select ARCH_HAS_ACPI_TABLE_UPGRADE if ACPI
select ARCH_HAS_ELF_RANDOMIZE
+ select ARCH_HAS_FORTIFY_SOURCE
select ARCH_HAS_GCOV_PROFILE_ALL
select ARCH_HAS_GIGANTIC_PAGE if (MEMORY_ISOLATION && COMPACTION) || CMA
select ARCH_HAS_KCOV
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 9d00622..bd0f33b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -452,7 +452,7 @@
emac: ethernet@1c30000 {
compatible = "allwinner,sun50i-a64-emac";
syscon = <&syscon>;
- reg = <0x01c30000 0x100>;
+ reg = <0x01c30000 0x10000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
resets = <&ccu RST_BUS_EMAC>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 35b8c88..738ed68 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -400,7 +400,7 @@
};
pwm_AO_ab: pwm@550 {
- compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+ compatible = "amlogic,meson-gx-ao-pwm", "amlogic,meson-gxbb-ao-pwm";
reg = <0x0 0x00550 0x0 0x10>;
#pwm-cells = <3>;
status = "disabled";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
index 72c5a9f..94567eb 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
@@ -109,8 +109,8 @@
status = "okay";
pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>;
pinctrl-names = "default";
- clocks = <&clkc CLKID_FCLK_DIV4>;
- clock-names = "clkin0";
+ clocks = <&xtal> , <&xtal>;
+ clock-names = "clkin0", "clkin1" ;
};
&pwm_ef {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
index 890821d..266fbcf 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
@@ -10,12 +10,20 @@
#include <dt-bindings/input/input.h>
-#include "meson-gxl-s905x-p212.dtsi"
+#include "meson-gxl-s905x.dtsi"
/ {
compatible = "libretech,cc", "amlogic,s905x", "amlogic,meson-gxl";
model = "Libre Technology CC";
+ aliases {
+ serial0 = &uart_AO;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
cvbs-connector {
compatible = "composite-video-connector";
@@ -26,6 +34,11 @@
};
};
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+ };
+
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
@@ -53,6 +66,39 @@
linux,default-trigger = "heartbeat";
};
};
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ vcc_3v3: regulator-vcc_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vcc_card: regulator-vcc-card {
+ compatible = "regulator-gpio";
+
+ regulator-name = "VCC_CARD";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+ gpios-states = <0>;
+
+ states = <3300000 0>,
+ <1800000 1>;
+ };
+
+ vddio_boot: regulator-vddio_boot {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_BOOT";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
};
&cvbs_vdac_port {
@@ -61,6 +107,16 @@
};
};
+ðmac {
+ status = "okay";
+};
+
+&ir {
+ status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
+};
+
&hdmi_tx {
status = "okay";
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
@@ -73,20 +129,43 @@
};
};
-/*
- * The following devices exists but are exposed on the general
- * purpose GPIO header. End user may well decide to use those pins
- * for another purpose
- */
+/* SD card */
+&sd_emmc_b {
+ status = "okay";
+ pinctrl-0 = <&sdcard_pins>;
+ pinctrl-names = "default";
-&sd_emmc_a {
- status = "disabled";
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <100000000>;
+ disable-wp;
+
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+ cd-inverted;
+
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vcc_card>;
};
-&uart_A {
- status = "disabled";
+/* eMMC */
+&sd_emmc_c {
+ status = "okay";
+ pinctrl-0 = <&emmc_pins>;
+ pinctrl-names = "default";
+
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ max-frequency = <50000000>;
+ non-removable;
+ disable-wp;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vddio_boot>;
};
-&wifi32k {
- status = "disabled";
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
};
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index dbcc3d4..51763d6 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -219,7 +219,7 @@
reg = <0x18800 0x100>, <0x18C00 0x20>;
gpiosb: gpio {
#gpio-cells = <2>;
- gpio-ranges = <&pinctrl_sb 0 0 29>;
+ gpio-ranges = <&pinctrl_sb 0 0 30>;
gpio-controller;
interrupts =
<GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
index 726528c..4c68605 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
@@ -270,6 +270,7 @@
interrupt-names = "mem", "ring0", "ring1",
"ring2", "ring3", "eip";
clocks = <&cpm_clk 1 26>;
+ dma-coherent;
};
};
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
index 95f8e5f..923f354 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
@@ -64,7 +64,7 @@
compatible = "marvell,armada-8k-rtc";
reg = <0x284000 0x20>, <0x284080 0x24>;
reg-names = "rtc", "rtc-soc";
- interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
};
cps_ethernet: ethernet@0 {
@@ -261,6 +261,7 @@
interrupt-names = "mem", "ring0", "ring1",
"ring2", "ring3", "eip";
clocks = <&cps_clk 1 26>;
+ dma-coherent;
/*
* The cryptographic engine found on the cp110
* master is enabled by default at the SoC
diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index aef35e0..a451996 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -508,7 +508,7 @@
/* audio_clkout0/1/2/3 */
#clock-cells = <1>;
- clock-frequency = <11289600 12288000>;
+ clock-frequency = <12288000 11289600>;
status = "okay";
diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi
index b5c6ee0..d1a3f3b 100644
--- a/arch/arm64/boot/dts/renesas/ulcb.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -281,7 +281,7 @@
/* audio_clkout0/1/2/3 */
#clock-cells = <1>;
- clock-frequency = <11289600 12288000>;
+ clock-frequency = <12288000 11289600>;
status = "okay";
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 6c7d147..b4ca115 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -476,6 +476,7 @@
CONFIG_MSM_GCC_8916=y
CONFIG_MSM_GCC_8994=y
CONFIG_MSM_MMCC_8996=y
+CONFIG_HWSPINLOCK=y
CONFIG_HWSPINLOCK_QCOM=y
CONFIG_ARM_MHU=y
CONFIG_PLATFORM_MHU=y
diff --git a/arch/arm64/include/asm/Kbuild b/arch/arm64/include/asm/Kbuild
index a7a97a6..f81c7b6 100644
--- a/arch/arm64/include/asm/Kbuild
+++ b/arch/arm64/include/asm/Kbuild
@@ -6,41 +6,24 @@
generic-y += dma-contiguous.h
generic-y += early_ioremap.h
generic-y += emergency-restart.h
-generic-y += errno.h
generic-y += hw_irq.h
-generic-y += ioctl.h
-generic-y += ioctls.h
-generic-y += ipcbuf.h
generic-y += irq_regs.h
generic-y += kdebug.h
generic-y += kmap_types.h
-generic-y += kvm_para.h
generic-y += local.h
generic-y += local64.h
generic-y += mcs_spinlock.h
generic-y += mm-arch-hooks.h
-generic-y += mman.h
-generic-y += msgbuf.h
generic-y += msi.h
-generic-y += poll.h
generic-y += preempt.h
-generic-y += resource.h
generic-y += rwsem.h
generic-y += segment.h
-generic-y += sembuf.h
generic-y += serial.h
generic-y += set_memory.h
-generic-y += shmbuf.h
generic-y += simd.h
generic-y += sizes.h
-generic-y += socket.h
-generic-y += sockios.h
-generic-y += swab.h
generic-y += switch_to.h
-generic-y += termbits.h
-generic-y += termios.h
generic-y += trace_clock.h
-generic-y += types.h
generic-y += unaligned.h
generic-y += user.h
generic-y += vga.h
diff --git a/arch/arm64/include/asm/atomic_lse.h b/arch/arm64/include/asm/atomic_lse.h
index 99fa69c..9ef0797 100644
--- a/arch/arm64/include/asm/atomic_lse.h
+++ b/arch/arm64/include/asm/atomic_lse.h
@@ -435,7 +435,7 @@
" sub x30, x30, %[ret]\n"
" cbnz x30, 1b\n"
"2:")
- : [ret] "+&r" (x0), [v] "+Q" (v->counter)
+ : [ret] "+r" (x0), [v] "+Q" (v->counter)
:
: __LL_SC_CLOBBERS, "cc", "memory");
diff --git a/arch/arm64/include/asm/bug.h b/arch/arm64/include/asm/bug.h
index 366448e..a02a571 100644
--- a/arch/arm64/include/asm/bug.h
+++ b/arch/arm64/include/asm/bug.h
@@ -36,7 +36,7 @@
#ifdef CONFIG_GENERIC_BUG
#define __BUG_ENTRY(flags) \
- ".pushsection __bug_table,\"a\"\n\t" \
+ ".pushsection __bug_table,\"aw\"\n\t" \
".align 2\n\t" \
"0: .long 1f - 0b\n\t" \
_BUGVERBOSE_LOCATION(__FILE__, __LINE__) \
diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h
index 32f827233..ef39dcb 100644
--- a/arch/arm64/include/asm/memory.h
+++ b/arch/arm64/include/asm/memory.h
@@ -64,8 +64,10 @@
* TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area.
*/
#define VA_BITS (CONFIG_ARM64_VA_BITS)
-#define VA_START (UL(0xffffffffffffffff) << VA_BITS)
-#define PAGE_OFFSET (UL(0xffffffffffffffff) << (VA_BITS - 1))
+#define VA_START (UL(0xffffffffffffffff) - \
+ (UL(1) << VA_BITS) + 1)
+#define PAGE_OFFSET (UL(0xffffffffffffffff) - \
+ (UL(1) << (VA_BITS - 1)) + 1)
#define KIMAGE_VADDR (MODULES_END)
#define MODULES_END (MODULES_VADDR + MODULES_VSIZE)
#define MODULES_VADDR (VA_START + KASAN_SHADOW_SIZE)
diff --git a/arch/arm64/include/asm/stackprotector.h b/arch/arm64/include/asm/stackprotector.h
index fe5e287..b86a086 100644
--- a/arch/arm64/include/asm/stackprotector.h
+++ b/arch/arm64/include/asm/stackprotector.h
@@ -30,6 +30,7 @@
/* Try to get a semi random initial value. */
get_random_bytes(&canary, sizeof(canary));
canary ^= LINUX_VERSION_CODE;
+ canary &= CANARY_MASK;
current->stack_canary = canary;
__stack_chk_guard = current->stack_canary;
diff --git a/arch/arm64/include/asm/string.h b/arch/arm64/include/asm/string.h
index 2eb714c..d0aa429 100644
--- a/arch/arm64/include/asm/string.h
+++ b/arch/arm64/include/asm/string.h
@@ -63,6 +63,11 @@
#define memcpy(dst, src, len) __memcpy(dst, src, len)
#define memmove(dst, src, len) __memmove(dst, src, len)
#define memset(s, c, n) __memset(s, c, n)
+
+#ifndef __NO_FORTIFY
+#define __NO_FORTIFY /* FORTIFY_SOURCE uses __builtin_memcpy, etc. */
+#endif
+
#endif
#endif
diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index 16e44fa..248339e 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -492,7 +492,7 @@
* the "%x0" template means XZR.
*/
#define write_sysreg(v, r) do { \
- u64 __val = (u64)v; \
+ u64 __val = (u64)(v); \
asm volatile("msr " __stringify(r) ", %x0" \
: : "rZ" (__val)); \
} while (0)
@@ -508,7 +508,7 @@
})
#define write_sysreg_s(v, r) do { \
- u64 __val = (u64)v; \
+ u64 __val = (u64)(v); \
asm volatile("msr_s " __stringify(r) ", %x0" : : "rZ" (__val)); \
} while (0)
diff --git a/arch/arm64/include/asm/uaccess.h b/arch/arm64/include/asm/uaccess.h
index 59f09e6..fab46a0 100644
--- a/arch/arm64/include/asm/uaccess.h
+++ b/arch/arm64/include/asm/uaccess.h
@@ -69,7 +69,7 @@
*/
#define __range_ok(addr, size) \
({ \
- unsigned long __addr = (unsigned long __force)(addr); \
+ unsigned long __addr = (unsigned long)(addr); \
unsigned long flag, roksum; \
__chk_user_ptr(addr); \
asm("adds %1, %1, %3; ccmp %1, %4, #2, cc; cset %0, ls" \
@@ -254,8 +254,6 @@
(void)0; \
})
-#define __get_user_unaligned __get_user
-
#define get_user(x, ptr) \
({ \
__typeof__(*(ptr)) __user *__p = (ptr); \
@@ -320,8 +318,6 @@
(void)0; \
})
-#define __put_user_unaligned __put_user
-
#define put_user(x, ptr) \
({ \
__typeof__(*(ptr)) __user *__p = (ptr); \
diff --git a/arch/arm64/include/uapi/asm/Kbuild b/arch/arm64/include/uapi/asm/Kbuild
index 13a97aa..fc28bd9 100644
--- a/arch/arm64/include/uapi/asm/Kbuild
+++ b/arch/arm64/include/uapi/asm/Kbuild
@@ -1,4 +1,20 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
+generic-y += errno.h
+generic-y += ioctl.h
+generic-y += ioctls.h
+generic-y += ipcbuf.h
generic-y += kvm_para.h
+generic-y += mman.h
+generic-y += msgbuf.h
+generic-y += poll.h
+generic-y += resource.h
+generic-y += sembuf.h
+generic-y += shmbuf.h
+generic-y += socket.h
+generic-y += sockios.h
+generic-y += swab.h
+generic-y += termbits.h
+generic-y += termios.h
+generic-y += types.h
diff --git a/arch/arm64/kernel/cpu_ops.c b/arch/arm64/kernel/cpu_ops.c
index e137cea..d169782 100644
--- a/arch/arm64/kernel/cpu_ops.c
+++ b/arch/arm64/kernel/cpu_ops.c
@@ -82,8 +82,8 @@
* Don't warn spuriously.
*/
if (cpu != 0)
- pr_err("%s: missing enable-method property\n",
- dn->full_name);
+ pr_err("%pOF: missing enable-method property\n",
+ dn);
}
} else {
enable_method = acpi_get_enable_method(cpu);
diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index 3211198..dc66e6e 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -469,7 +469,7 @@
*/
cell = of_get_property(dn, "reg", NULL);
if (!cell) {
- pr_err("%s: missing reg property\n", dn->full_name);
+ pr_err("%pOF: missing reg property\n", dn);
return INVALID_HWID;
}
@@ -478,7 +478,7 @@
* Non affinity bits must be set to 0 in the DT
*/
if (hwid & ~MPIDR_HWID_BITMASK) {
- pr_err("%s: invalid reg property\n", dn->full_name);
+ pr_err("%pOF: invalid reg property\n", dn);
return INVALID_HWID;
}
return hwid;
@@ -627,8 +627,8 @@
goto next;
if (is_mpidr_duplicate(cpu_count, hwid)) {
- pr_err("%s: duplicate cpu reg properties in the DT\n",
- dn->full_name);
+ pr_err("%pOF: duplicate cpu reg properties in the DT\n",
+ dn);
goto next;
}
@@ -640,8 +640,8 @@
*/
if (hwid == cpu_logical_map(0)) {
if (bootcpu_valid) {
- pr_err("%s: duplicate boot cpu reg property in DT\n",
- dn->full_name);
+ pr_err("%pOF: duplicate boot cpu reg property in DT\n",
+ dn);
goto next;
}
diff --git a/arch/arm64/kernel/topology.c b/arch/arm64/kernel/topology.c
index 79244c7..8d48b23 100644
--- a/arch/arm64/kernel/topology.c
+++ b/arch/arm64/kernel/topology.c
@@ -45,7 +45,7 @@
}
}
- pr_crit("Unable to find CPU node for %s\n", cpu_node->full_name);
+ pr_crit("Unable to find CPU node for %pOF\n", cpu_node);
of_node_put(cpu_node);
return -1;
@@ -71,8 +71,8 @@
cpu_topology[cpu].core_id = core_id;
cpu_topology[cpu].thread_id = i;
} else {
- pr_err("%s: Can't get CPU for thread\n",
- t->full_name);
+ pr_err("%pOF: Can't get CPU for thread\n",
+ t);
of_node_put(t);
return -EINVAL;
}
@@ -84,15 +84,15 @@
cpu = get_cpu_for_node(core);
if (cpu >= 0) {
if (!leaf) {
- pr_err("%s: Core has both threads and CPU\n",
- core->full_name);
+ pr_err("%pOF: Core has both threads and CPU\n",
+ core);
return -EINVAL;
}
cpu_topology[cpu].cluster_id = cluster_id;
cpu_topology[cpu].core_id = core_id;
} else if (leaf) {
- pr_err("%s: Can't get CPU for leaf core\n", core->full_name);
+ pr_err("%pOF: Can't get CPU for leaf core\n", core);
return -EINVAL;
}
@@ -137,8 +137,8 @@
has_cores = true;
if (depth == 0) {
- pr_err("%s: cpu-map children should be clusters\n",
- c->full_name);
+ pr_err("%pOF: cpu-map children should be clusters\n",
+ c);
of_node_put(c);
return -EINVAL;
}
@@ -146,8 +146,8 @@
if (leaf) {
ret = parse_core(c, cluster_id, core_id++);
} else {
- pr_err("%s: Non-leaf cluster with core %s\n",
- cluster->full_name, name);
+ pr_err("%pOF: Non-leaf cluster with core %s\n",
+ cluster, name);
ret = -EINVAL;
}
@@ -159,7 +159,7 @@
} while (c);
if (leaf && !has_cores)
- pr_warn("%s: empty cluster\n", cluster->full_name);
+ pr_warn("%pOF: empty cluster\n", cluster);
if (leaf)
cluster_id++;
diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c
index c7c7088..8a62648 100644
--- a/arch/arm64/kernel/traps.c
+++ b/arch/arm64/kernel/traps.c
@@ -274,10 +274,12 @@
void die(const char *str, struct pt_regs *regs, int err)
{
int ret;
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&die_lock, flags);
oops_enter();
- raw_spin_lock_irq(&die_lock);
console_verbose();
bust_spinlocks(1);
ret = __die(str, err, regs);
@@ -287,13 +289,15 @@
bust_spinlocks(0);
add_taint(TAINT_DIE, LOCKDEP_NOW_UNRELIABLE);
- raw_spin_unlock_irq(&die_lock);
oops_exit();
if (in_interrupt())
panic("Fatal exception in interrupt");
if (panic_on_oops)
panic("Fatal exception");
+
+ raw_spin_unlock_irqrestore(&die_lock, flags);
+
if (ret != NOTIFY_STOP)
do_exit(SIGSEGV);
}
@@ -519,7 +523,7 @@
{
int rt = (esr & ESR_ELx_SYS64_ISS_RT_MASK) >> ESR_ELx_SYS64_ISS_RT_SHIFT;
- pt_regs_write_reg(regs, rt, read_sysreg(cntfrq_el0));
+ pt_regs_write_reg(regs, rt, arch_timer_get_rate());
regs->pc += 4;
}
diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index 7786288..2e070d3 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -764,7 +764,7 @@
if (p->is_write) {
if (r->CRm & 0x2)
/* accessing PMOVSSET_EL0 */
- kvm_pmu_overflow_set(vcpu, p->regval & mask);
+ vcpu_sys_reg(vcpu, PMOVSSET_EL0) |= (p->regval & mask);
else
/* accessing PMOVSCLR_EL0 */
vcpu_sys_reg(vcpu, PMOVSSET_EL0) &= ~(p->regval & mask);
diff --git a/arch/arm64/lib/copy_page.S b/arch/arm64/lib/copy_page.S
index c3cd65e..076c437 100644
--- a/arch/arm64/lib/copy_page.S
+++ b/arch/arm64/lib/copy_page.S
@@ -30,9 +30,10 @@
*/
ENTRY(copy_page)
alternative_if ARM64_HAS_NO_HW_PREFETCH
- # Prefetch two cache lines ahead.
- prfm pldl1strm, [x1, #128]
- prfm pldl1strm, [x1, #256]
+ // Prefetch three cache lines ahead.
+ prfm pldl1strm, [x1, #128]
+ prfm pldl1strm, [x1, #256]
+ prfm pldl1strm, [x1, #384]
alternative_else_nop_endif
ldp x2, x3, [x1]
@@ -50,7 +51,7 @@
subs x18, x18, #128
alternative_if ARM64_HAS_NO_HW_PREFETCH
- prfm pldl1strm, [x1, #384]
+ prfm pldl1strm, [x1, #384]
alternative_else_nop_endif
stnp x2, x3, [x0]
diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c
index e90cd1d..f27d4dd 100644
--- a/arch/arm64/mm/dma-mapping.c
+++ b/arch/arm64/mm/dma-mapping.c
@@ -329,7 +329,7 @@
vma->vm_page_prot = __get_dma_pgprot(attrs, vma->vm_page_prot,
is_device_dma_coherent(dev));
- if (dma_mmap_from_coherent(dev, vma, cpu_addr, size, &ret))
+ if (dma_mmap_from_dev_coherent(dev, vma, cpu_addr, size, &ret))
return ret;
return __swiotlb_mmap_pfn(vma, pfn, size);
@@ -706,7 +706,7 @@
vma->vm_page_prot = __get_dma_pgprot(attrs, vma->vm_page_prot,
is_device_dma_coherent(dev));
- if (dma_mmap_from_coherent(dev, vma, cpu_addr, size, &ret))
+ if (dma_mmap_from_dev_coherent(dev, vma, cpu_addr, size, &ret))
return ret;
if (attrs & DMA_ATTR_FORCE_CONTIGUOUS) {
diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c
index c7861c9..2509e4f 100644
--- a/arch/arm64/mm/fault.c
+++ b/arch/arm64/mm/fault.c
@@ -163,26 +163,27 @@
/* only preserve the access flags and write permission */
pte_val(entry) &= PTE_AF | PTE_WRITE | PTE_DIRTY;
- /*
- * PTE_RDONLY is cleared by default in the asm below, so set it in
- * back if necessary (read-only or clean PTE).
- */
+ /* set PTE_RDONLY if actual read-only or clean PTE */
if (!pte_write(entry) || !pte_sw_dirty(entry))
pte_val(entry) |= PTE_RDONLY;
/*
* Setting the flags must be done atomically to avoid racing with the
- * hardware update of the access/dirty state.
+ * hardware update of the access/dirty state. The PTE_RDONLY bit must
+ * be set to the most permissive (lowest value) of *ptep and entry
+ * (calculated as: a & b == ~(~a | ~b)).
*/
+ pte_val(entry) ^= PTE_RDONLY;
asm volatile("// ptep_set_access_flags\n"
" prfm pstl1strm, %2\n"
"1: ldxr %0, %2\n"
- " and %0, %0, %3 // clear PTE_RDONLY\n"
+ " eor %0, %0, %3 // negate PTE_RDONLY in *ptep\n"
" orr %0, %0, %4 // set flags\n"
+ " eor %0, %0, %3 // negate final PTE_RDONLY\n"
" stxr %w1, %0, %2\n"
" cbnz %w1, 1b\n"
: "=&r" (old_pteval), "=&r" (tmp), "+Q" (pte_val(*ptep))
- : "L" (~PTE_RDONLY), "r" (pte_val(entry)));
+ : "L" (PTE_RDONLY), "r" (pte_val(entry)));
flush_tlb_fix_spurious_fault(vma, address);
return 1;
diff --git a/arch/arm64/mm/mmap.c b/arch/arm64/mm/mmap.c
index adc208c..decccff 100644
--- a/arch/arm64/mm/mmap.c
+++ b/arch/arm64/mm/mmap.c
@@ -35,7 +35,7 @@
* Leave enough space between the mmap area and the stack to honour ulimit in
* the face of randomisation.
*/
-#define MIN_GAP (SZ_128M + ((STACK_RND_MASK << PAGE_SHIFT) + 1))
+#define MIN_GAP (SZ_128M)
#define MAX_GAP (STACK_TOP/6*5)
static int mmap_is_legacy(void)
@@ -65,6 +65,11 @@
static unsigned long mmap_base(unsigned long rnd)
{
unsigned long gap = rlimit(RLIMIT_STACK);
+ unsigned long pad = (STACK_RND_MASK << PAGE_SHIFT) + stack_guard_gap;
+
+ /* Values close to RLIM_INFINITY can overflow. */
+ if (gap + pad > gap)
+ gap += pad;
if (gap < MIN_GAP)
gap = MIN_GAP;
diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c
index 23c2d89..f1eb15e 100644
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@@ -496,7 +496,7 @@
static void __init map_kernel_segment(pgd_t *pgd, void *va_start, void *va_end,
pgprot_t prot, struct vm_struct *vma,
- int flags)
+ int flags, unsigned long vm_flags)
{
phys_addr_t pa_start = __pa_symbol(va_start);
unsigned long size = va_end - va_start;
@@ -507,10 +507,13 @@
__create_pgd_mapping(pgd, pa_start, (unsigned long)va_start, size, prot,
early_pgtable_alloc, flags);
+ if (!(vm_flags & VM_NO_GUARD))
+ size += PAGE_SIZE;
+
vma->addr = va_start;
vma->phys_addr = pa_start;
vma->size = size;
- vma->flags = VM_MAP;
+ vma->flags = VM_MAP | vm_flags;
vma->caller = __builtin_return_address(0);
vm_area_add_early(vma);
@@ -541,14 +544,15 @@
* Only rodata will be remapped with different permissions later on,
* all other segments are allowed to use contiguous mappings.
*/
- map_kernel_segment(pgd, _text, _etext, text_prot, &vmlinux_text, 0);
+ map_kernel_segment(pgd, _text, _etext, text_prot, &vmlinux_text, 0,
+ VM_NO_GUARD);
map_kernel_segment(pgd, __start_rodata, __inittext_begin, PAGE_KERNEL,
- &vmlinux_rodata, NO_CONT_MAPPINGS);
+ &vmlinux_rodata, NO_CONT_MAPPINGS, VM_NO_GUARD);
map_kernel_segment(pgd, __inittext_begin, __inittext_end, text_prot,
- &vmlinux_inittext, 0);
+ &vmlinux_inittext, 0, VM_NO_GUARD);
map_kernel_segment(pgd, __initdata_begin, __initdata_end, PAGE_KERNEL,
- &vmlinux_initdata, 0);
- map_kernel_segment(pgd, _data, _end, PAGE_KERNEL, &vmlinux_data, 0);
+ &vmlinux_initdata, 0, VM_NO_GUARD);
+ map_kernel_segment(pgd, _data, _end, PAGE_KERNEL, &vmlinux_data, 0, 0);
if (!pgd_val(*pgd_offset_raw(pgd, FIXADDR_START))) {
/*
diff --git a/arch/arm64/mm/numa.c b/arch/arm64/mm/numa.c
index b388a99..dad128b 100644
--- a/arch/arm64/mm/numa.c
+++ b/arch/arm64/mm/numa.c
@@ -208,8 +208,6 @@
}
node_set(nid, numa_nodes_parsed);
- pr_info("Adding memblock [0x%llx - 0x%llx] on node %d\n",
- start, (end - 1), nid);
return ret;
}
@@ -223,10 +221,7 @@
void *nd;
int tnid;
- if (start_pfn < end_pfn)
- pr_info("Initmem setup node %d [mem %#010Lx-%#010Lx]\n", nid,
- start_pfn << PAGE_SHIFT, (end_pfn << PAGE_SHIFT) - 1);
- else
+ if (start_pfn >= end_pfn)
pr_info("Initmem setup node %d [<memory-less node>]\n", nid);
nd_pa = memblock_alloc_try_nid(nd_size, SMP_CACHE_BYTES, nid);
diff --git a/arch/blackfin/include/asm/Kbuild b/arch/blackfin/include/asm/Kbuild
index dc4ef9a..fe73697 100644
--- a/arch/blackfin/include/asm/Kbuild
+++ b/arch/blackfin/include/asm/Kbuild
@@ -1,50 +1,28 @@
-
-generic-y += auxvec.h
-generic-y += bitsperlong.h
generic-y += bugs.h
generic-y += current.h
generic-y += device.h
generic-y += div64.h
generic-y += emergency-restart.h
-generic-y += errno.h
generic-y += extable.h
generic-y += fb.h
generic-y += futex.h
generic-y += hw_irq.h
-generic-y += ioctl.h
-generic-y += ipcbuf.h
generic-y += irq_regs.h
generic-y += irq_work.h
generic-y += kdebug.h
generic-y += kmap_types.h
-generic-y += kvm_para.h
+generic-y += kprobes.h
generic-y += local.h
generic-y += local64.h
generic-y += mcs_spinlock.h
generic-y += mm-arch-hooks.h
-generic-y += mman.h
-generic-y += msgbuf.h
-generic-y += param.h
generic-y += percpu.h
generic-y += pgalloc.h
generic-y += preempt.h
-generic-y += resource.h
-generic-y += sembuf.h
generic-y += serial.h
-generic-y += setup.h
-generic-y += shmbuf.h
-generic-y += shmparam.h
-generic-y += socket.h
-generic-y += sockios.h
-generic-y += statfs.h
-generic-y += termbits.h
-generic-y += termios.h
generic-y += topology.h
generic-y += trace_clock.h
-generic-y += types.h
-generic-y += ucontext.h
generic-y += unaligned.h
generic-y += user.h
generic-y += word-at-a-time.h
generic-y += xor.h
-generic-y += kprobes.h
diff --git a/arch/blackfin/include/asm/bug.h b/arch/blackfin/include/asm/bug.h
index 8d9b1eb..76b2e82 100644
--- a/arch/blackfin/include/asm/bug.h
+++ b/arch/blackfin/include/asm/bug.h
@@ -21,7 +21,7 @@
#define _BUG_OR_WARN(flags) \
asm volatile( \
"1: .hword %0\n" \
- " .section __bug_table,\"a\",@progbits\n" \
+ " .section __bug_table,\"aw\",@progbits\n" \
"2: .long 1b\n" \
" .long %1\n" \
" .short %2\n" \
@@ -38,7 +38,7 @@
#define _BUG_OR_WARN(flags) \
asm volatile( \
"1: .hword %0\n" \
- " .section __bug_table,\"a\",@progbits\n" \
+ " .section __bug_table,\"aw\",@progbits\n" \
"2: .long 1b\n" \
" .short %1\n" \
" .org 2b + %2\n" \
diff --git a/arch/blackfin/include/asm/flat.h b/arch/blackfin/include/asm/flat.h
index c1314c5..f1d6ba7 100644
--- a/arch/blackfin/include/asm/flat.h
+++ b/arch/blackfin/include/asm/flat.h
@@ -14,23 +14,28 @@
#define flat_argvp_envp_on_stack() 0
#define flat_old_ram_flag(flags) (flags)
-extern unsigned long bfin_get_addr_from_rp (unsigned long *ptr,
- unsigned long relval,
- unsigned long flags,
- unsigned long *persistent);
+extern unsigned long bfin_get_addr_from_rp (u32 *ptr, u32 relval,
+ u32 flags, u32 *persistent);
-extern void bfin_put_addr_at_rp(unsigned long *ptr, unsigned long addr,
- unsigned long relval);
+extern void bfin_put_addr_at_rp(u32 *ptr, u32 addr, u32 relval);
/* The amount by which a relocation can exceed the program image limits
without being regarded as an error. */
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
-#define flat_get_addr_from_rp(rp, relval, flags, persistent) \
- bfin_get_addr_from_rp(rp, relval, flags, persistent)
-#define flat_put_addr_at_rp(rp, val, relval) \
- bfin_put_addr_at_rp(rp, val, relval)
+static inline int flat_get_addr_from_rp(u32 __user *rp, u32 relval, u32 flags,
+ u32 *addr, u32 *persistent)
+{
+ *addr = bfin_get_addr_from_rp(rp, relval, flags, persistent);
+ return 0;
+}
+
+static inline int flat_put_addr_at_rp(u32 __user *rp, u32 val, u32 relval)
+{
+ bfin_put_addr_at_rp(rp, val, relval);
+ return 0;
+}
/* Convert a relocation entry into an address. */
static inline unsigned long
@@ -39,8 +44,7 @@
return relval & 0x03ffffff; /* Mask out top 6 bits */
}
-static inline int flat_set_persistent(unsigned long relval,
- unsigned long *persistent)
+static inline int flat_set_persistent(u32 relval, u32 *persistent)
{
int type = (relval >> 26) & 7;
if (type == 3) {
diff --git a/arch/blackfin/include/asm/nmi.h b/arch/blackfin/include/asm/nmi.h
index b9caac4..107d237 100644
--- a/arch/blackfin/include/asm/nmi.h
+++ b/arch/blackfin/include/asm/nmi.h
@@ -9,4 +9,6 @@
#include <linux/nmi.h>
+extern void arch_touch_nmi_watchdog(void);
+
#endif
diff --git a/arch/blackfin/include/uapi/asm/Kbuild b/arch/blackfin/include/uapi/asm/Kbuild
index b15bf6b..aa624b4 100644
--- a/arch/blackfin/include/uapi/asm/Kbuild
+++ b/arch/blackfin/include/uapi/asm/Kbuild
@@ -1,2 +1,24 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
+
+generic-y += auxvec.h
+generic-y += bitsperlong.h
+generic-y += errno.h
+generic-y += ioctl.h
+generic-y += ipcbuf.h
+generic-y += kvm_para.h
+generic-y += mman.h
+generic-y += msgbuf.h
+generic-y += param.h
+generic-y += resource.h
+generic-y += sembuf.h
+generic-y += setup.h
+generic-y += shmbuf.h
+generic-y += shmparam.h
+generic-y += socket.h
+generic-y += sockios.h
+generic-y += statfs.h
+generic-y += termbits.h
+generic-y += termios.h
+generic-y += types.h
+generic-y += ucontext.h
diff --git a/arch/blackfin/kernel/flat.c b/arch/blackfin/kernel/flat.c
index b5b6584..8ebc54d 100644
--- a/arch/blackfin/kernel/flat.c
+++ b/arch/blackfin/kernel/flat.c
@@ -13,14 +13,14 @@
#define FLAT_BFIN_RELOC_TYPE_16H_BIT 1
#define FLAT_BFIN_RELOC_TYPE_32_BIT 2
-unsigned long bfin_get_addr_from_rp(unsigned long *ptr,
- unsigned long relval,
- unsigned long flags,
- unsigned long *persistent)
+unsigned long bfin_get_addr_from_rp(u32 *ptr,
+ u32 relval,
+ u32 flags,
+ u32 *persistent)
{
unsigned short *usptr = (unsigned short *)ptr;
int type = (relval >> 26) & 7;
- unsigned long val;
+ u32 val;
switch (type) {
case FLAT_BFIN_RELOC_TYPE_16_BIT:
@@ -32,7 +32,7 @@
break;
case FLAT_BFIN_RELOC_TYPE_32_BIT:
- pr_debug("*ptr = %lx", get_unaligned(ptr));
+ pr_debug("*ptr = %x", get_unaligned(ptr));
val = get_unaligned(ptr);
break;
@@ -59,8 +59,7 @@
* Insert the address ADDR into the symbol reference at RP;
* RELVAL is the raw relocation-table entry from which RP is derived
*/
-void bfin_put_addr_at_rp(unsigned long *ptr, unsigned long addr,
- unsigned long relval)
+void bfin_put_addr_at_rp(u32 *ptr, u32 addr, u32 relval)
{
unsigned short *usptr = (unsigned short *)ptr;
int type = (relval >> 26) & 7;
@@ -78,7 +77,7 @@
case FLAT_BFIN_RELOC_TYPE_32_BIT:
put_unaligned(addr, ptr);
- pr_debug("new ptr =%lx", get_unaligned(ptr));
+ pr_debug("new ptr =%x", get_unaligned(ptr));
break;
}
}
diff --git a/arch/blackfin/kernel/nmi.c b/arch/blackfin/kernel/nmi.c
index 633c370..1e71432 100644
--- a/arch/blackfin/kernel/nmi.c
+++ b/arch/blackfin/kernel/nmi.c
@@ -190,7 +190,7 @@
}
device_initcall(init_nmi_wdt);
-void touch_nmi_watchdog(void)
+void arch_touch_nmi_watchdog(void)
{
atomic_set(&nmi_touched[smp_processor_id()], 1);
}
diff --git a/arch/c6x/include/asm/Kbuild b/arch/c6x/include/asm/Kbuild
index a3c8d05..d717329 100644
--- a/arch/c6x/include/asm/Kbuild
+++ b/arch/c6x/include/asm/Kbuild
@@ -1,8 +1,5 @@
-
generic-y += atomic.h
-generic-y += auxvec.h
generic-y += barrier.h
-generic-y += bitsperlong.h
generic-y += bugs.h
generic-y += clkdev.h
generic-y += current.h
@@ -10,55 +7,32 @@
generic-y += div64.h
generic-y += dma.h
generic-y += emergency-restart.h
-generic-y += errno.h
generic-y += exec.h
generic-y += extable.h
generic-y += fb.h
-generic-y += fcntl.h
generic-y += futex.h
generic-y += hw_irq.h
generic-y += io.h
-generic-y += ioctl.h
-generic-y += ioctls.h
-generic-y += ipcbuf.h
generic-y += irq_regs.h
generic-y += irq_work.h
generic-y += kdebug.h
generic-y += kmap_types.h
+generic-y += kprobes.h
generic-y += local.h
generic-y += mcs_spinlock.h
generic-y += mm-arch-hooks.h
-generic-y += mman.h
generic-y += mmu.h
generic-y += mmu_context.h
-generic-y += msgbuf.h
-generic-y += param.h
generic-y += pci.h
generic-y += percpu.h
generic-y += pgalloc.h
-generic-y += poll.h
-generic-y += posix_types.h
generic-y += preempt.h
-generic-y += resource.h
generic-y += segment.h
-generic-y += sembuf.h
generic-y += serial.h
-generic-y += shmbuf.h
-generic-y += shmparam.h
-generic-y += signal.h
-generic-y += socket.h
-generic-y += sockios.h
-generic-y += stat.h
-generic-y += statfs.h
-generic-y += termbits.h
-generic-y += termios.h
generic-y += tlbflush.h
generic-y += topology.h
generic-y += trace_clock.h
-generic-y += types.h
-generic-y += ucontext.h
generic-y += user.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h
-generic-y += kprobes.h
diff --git a/arch/c6x/include/asm/flat.h b/arch/c6x/include/asm/flat.h
index a1858bd..6f1feb0 100644
--- a/arch/c6x/include/asm/flat.h
+++ b/arch/c6x/include/asm/flat.h
@@ -1,11 +1,22 @@
#ifndef __ASM_C6X_FLAT_H
#define __ASM_C6X_FLAT_H
+#include <asm/unaligned.h>
+
#define flat_argvp_envp_on_stack() 0
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
-#define flat_get_addr_from_rp(rp, relval, flags, p) get_unaligned(rp)
-#define flat_put_addr_at_rp(rp, val, relval) put_unaligned(val, rp)
+static inline int flat_get_addr_from_rp(u32 __user *rp, u32 relval, u32 flags,
+ u32 *addr, u32 *persistent)
+{
+ *addr = get_unaligned((__force u32 *)rp);
+ return 0;
+}
+static inline int flat_put_addr_at_rp(u32 __user *rp, u32 addr, u32 rel)
+{
+ put_unaligned(addr, (__force u32 *)rp);
+ return 0;
+}
#define flat_get_relocate_addr(rel) (rel)
#define flat_set_persistent(relval, p) 0
diff --git a/arch/c6x/include/uapi/asm/Kbuild b/arch/c6x/include/uapi/asm/Kbuild
index 1c44d3b..67ee896 100644
--- a/arch/c6x/include/uapi/asm/Kbuild
+++ b/arch/c6x/include/uapi/asm/Kbuild
@@ -1,5 +1,30 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
+generic-y += auxvec.h
+generic-y += bitsperlong.h
+generic-y += errno.h
+generic-y += fcntl.h
+generic-y += ioctl.h
+generic-y += ioctls.h
+generic-y += ipcbuf.h
generic-y += kvm_para.h
+generic-y += mman.h
+generic-y += msgbuf.h
+generic-y += param.h
+generic-y += poll.h
+generic-y += posix_types.h
+generic-y += resource.h
+generic-y += sembuf.h
+generic-y += shmbuf.h
+generic-y += shmparam.h
generic-y += siginfo.h
+generic-y += signal.h
+generic-y += socket.h
+generic-y += sockios.h
+generic-y += stat.h
+generic-y += statfs.h
+generic-y += termbits.h
+generic-y += termios.h
+generic-y += types.h
+generic-y += ucontext.h
diff --git a/arch/cris/arch-v10/drivers/gpio.c b/arch/cris/arch-v10/drivers/gpio.c
index 64285e0..dfd3b3b 100644
--- a/arch/cris/arch-v10/drivers/gpio.c
+++ b/arch/cris/arch-v10/drivers/gpio.c
@@ -399,7 +399,7 @@
/* Main device API. ioctl's to read/set/clear bits, as well as to
* set alarms to wait for using a subsequent select().
*/
-unsigned long inline setget_input(struct gpio_private *priv, unsigned long arg)
+inline unsigned long setget_input(struct gpio_private *priv, unsigned long arg)
{
/* Set direction 0=unchanged 1=input,
* return mask with 1=input */
@@ -450,7 +450,7 @@
return dir_g_in_bits;
} /* setget_input */
-unsigned long inline setget_output(struct gpio_private *priv, unsigned long arg)
+inline unsigned long setget_output(struct gpio_private *priv, unsigned long arg)
{
if (USE_PORTS(priv)) {
*priv->dir = *priv->dir_shadow |=
diff --git a/arch/cris/include/asm/Kbuild b/arch/cris/include/asm/Kbuild
index acc5781..460349c 100644
--- a/arch/cris/include/asm/Kbuild
+++ b/arch/cris/include/asm/Kbuild
@@ -1,48 +1,31 @@
generic-y += atomic.h
-generic-y += auxvec.h
generic-y += barrier.h
-generic-y += bitsperlong.h
generic-y += clkdev.h
generic-y += cmpxchg.h
generic-y += current.h
generic-y += device.h
generic-y += div64.h
-generic-y += errno.h
+generic-y += emergency-restart.h
generic-y += exec.h
generic-y += extable.h
-generic-y += emergency-restart.h
-generic-y += fcntl.h
generic-y += futex.h
generic-y += hardirq.h
-generic-y += ioctl.h
-generic-y += ipcbuf.h
generic-y += irq_regs.h
generic-y += irq_work.h
generic-y += kdebug.h
generic-y += kmap_types.h
-generic-y += kvm_para.h
+generic-y += kprobes.h
generic-y += linkage.h
generic-y += local.h
generic-y += local64.h
generic-y += mcs_spinlock.h
generic-y += mm-arch-hooks.h
-generic-y += mman.h
generic-y += module.h
-generic-y += msgbuf.h
generic-y += percpu.h
-generic-y += poll.h
generic-y += preempt.h
-generic-y += resource.h
generic-y += sections.h
-generic-y += sembuf.h
-generic-y += shmbuf.h
-generic-y += socket.h
-generic-y += sockios.h
-generic-y += statfs.h
generic-y += topology.h
generic-y += trace_clock.h
-generic-y += types.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h
-generic-y += kprobes.h
diff --git a/arch/cris/include/uapi/asm/Kbuild b/arch/cris/include/uapi/asm/Kbuild
index b55fc2a..3687b54 100644
--- a/arch/cris/include/uapi/asm/Kbuild
+++ b/arch/cris/include/uapi/asm/Kbuild
@@ -1,4 +1,21 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
+generic-y += auxvec.h
+generic-y += bitsperlong.h
+generic-y += errno.h
+generic-y += fcntl.h
+generic-y += ioctl.h
+generic-y += ipcbuf.h
+generic-y += kvm_para.h
+generic-y += mman.h
+generic-y += msgbuf.h
+generic-y += poll.h
+generic-y += resource.h
+generic-y += sembuf.h
+generic-y += shmbuf.h
generic-y += siginfo.h
+generic-y += socket.h
+generic-y += sockios.h
+generic-y += statfs.h
+generic-y += types.h
diff --git a/arch/frv/include/asm/tlbflush.h b/arch/frv/include/asm/tlbflush.h
index 7ac5eaf..7587942 100644
--- a/arch/frv/include/asm/tlbflush.h
+++ b/arch/frv/include/asm/tlbflush.h
@@ -18,10 +18,10 @@
#ifdef CONFIG_MMU
#ifndef __ASSEMBLY__
-extern void asmlinkage __flush_tlb_all(void);
-extern void asmlinkage __flush_tlb_mm(unsigned long contextid);
-extern void asmlinkage __flush_tlb_page(unsigned long contextid, unsigned long start);
-extern void asmlinkage __flush_tlb_range(unsigned long contextid,
+extern asmlinkage void __flush_tlb_all(void);
+extern asmlinkage void __flush_tlb_mm(unsigned long contextid);
+extern asmlinkage void __flush_tlb_page(unsigned long contextid, unsigned long start);
+extern asmlinkage void __flush_tlb_range(unsigned long contextid,
unsigned long start, unsigned long end);
#endif /* !__ASSEMBLY__ */
diff --git a/arch/h8300/include/asm/Kbuild b/arch/h8300/include/asm/Kbuild
index 99c8246..bc07749 100644
--- a/arch/h8300/include/asm/Kbuild
+++ b/arch/h8300/include/asm/Kbuild
@@ -1,5 +1,4 @@
generic-y += asm-offsets.h
-generic-y += auxvec.h
generic-y += barrier.h
generic-y += bugs.h
generic-y += cacheflush.h
@@ -11,66 +10,41 @@
generic-y += div64.h
generic-y += dma.h
generic-y += emergency-restart.h
-generic-y += errno.h
generic-y += exec.h
generic-y += extable.h
generic-y += fb.h
-generic-y += fcntl.h
generic-y += ftrace.h
generic-y += futex.h
generic-y += hardirq.h
generic-y += hash.h
generic-y += hw_irq.h
-generic-y += ioctl.h
-generic-y += ioctls.h
-generic-y += ipcbuf.h
generic-y += irq_regs.h
generic-y += irq_work.h
generic-y += kdebug.h
generic-y += kmap_types.h
-generic-y += kvm_para.h
+generic-y += kprobes.h
generic-y += linkage.h
generic-y += local.h
generic-y += local64.h
generic-y += mcs_spinlock.h
generic-y += mm-arch-hooks.h
-generic-y += mman.h
generic-y += mmu.h
generic-y += mmu_context.h
generic-y += module.h
-generic-y += msgbuf.h
-generic-y += param.h
generic-y += parport.h
generic-y += percpu.h
generic-y += pgalloc.h
-generic-y += poll.h
-generic-y += posix_types.h
generic-y += preempt.h
-generic-y += resource.h
generic-y += scatterlist.h
generic-y += sections.h
-generic-y += sembuf.h
generic-y += serial.h
-generic-y += setup.h
-generic-y += shmbuf.h
-generic-y += shmparam.h
generic-y += sizes.h
-generic-y += socket.h
-generic-y += sockios.h
generic-y += spinlock.h
-generic-y += stat.h
-generic-y += statfs.h
-generic-y += swab.h
-generic-y += termbits.h
-generic-y += termios.h
generic-y += timex.h
generic-y += tlbflush.h
-generic-y += trace_clock.h
generic-y += topology.h
-generic-y += types.h
-generic-y += ucontext.h
+generic-y += trace_clock.h
generic-y += unaligned.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h
-generic-y += kprobes.h
diff --git a/arch/h8300/include/asm/flat.h b/arch/h8300/include/asm/flat.h
index a4898ec..7e0bd6f 100644
--- a/arch/h8300/include/asm/flat.h
+++ b/arch/h8300/include/asm/flat.h
@@ -5,6 +5,8 @@
#ifndef __H8300_FLAT_H__
#define __H8300_FLAT_H__
+#include <asm/unaligned.h>
+
#define flat_argvp_envp_on_stack() 1
#define flat_old_ram_flag(flags) 1
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
@@ -18,11 +20,21 @@
*/
#define flat_get_relocate_addr(rel) (rel & ~0x00000001)
-#define flat_get_addr_from_rp(rp, relval, flags, persistent) \
- ({(void)persistent; \
- get_unaligned(rp) & (((flags) & FLAT_FLAG_GOTPIC) ? \
- 0xffffffff : 0x00ffffff); })
-#define flat_put_addr_at_rp(rp, addr, rel) \
- put_unaligned(((*(char *)(rp)) << 24) | ((addr) & 0x00ffffff), (rp))
+static inline int flat_get_addr_from_rp(u32 __user *rp, u32 relval, u32 flags,
+ u32 *addr, u32 *persistent)
+{
+ u32 val = get_unaligned((__force u32 *)rp);
+ if (!(flags & FLAT_FLAG_GOTPIC))
+ val &= 0x00ffffff;
+ *addr = val;
+ return 0;
+}
+
+static inline int flat_put_addr_at_rp(u32 __user *rp, u32 addr, u32 rel)
+{
+ u32 *p = (__force u32 *)rp;
+ put_unaligned((addr & 0x00ffffff) | (*(char *)p << 24), p);
+ return 0;
+}
#endif /* __H8300_FLAT_H__ */
diff --git a/arch/h8300/include/uapi/asm/Kbuild b/arch/h8300/include/uapi/asm/Kbuild
index b55fc2a..187aed8 100644
--- a/arch/h8300/include/uapi/asm/Kbuild
+++ b/arch/h8300/include/uapi/asm/Kbuild
@@ -1,4 +1,30 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
+generic-y += auxvec.h
+generic-y += errno.h
+generic-y += fcntl.h
+generic-y += ioctl.h
+generic-y += ioctls.h
+generic-y += ipcbuf.h
+generic-y += kvm_para.h
+generic-y += mman.h
+generic-y += msgbuf.h
+generic-y += param.h
+generic-y += poll.h
+generic-y += posix_types.h
+generic-y += resource.h
+generic-y += sembuf.h
+generic-y += setup.h
+generic-y += shmbuf.h
+generic-y += shmparam.h
generic-y += siginfo.h
+generic-y += socket.h
+generic-y += sockios.h
+generic-y += stat.h
+generic-y += statfs.h
+generic-y += swab.h
+generic-y += termbits.h
+generic-y += termios.h
+generic-y += types.h
+generic-y += ucontext.h
diff --git a/arch/hexagon/include/asm/Kbuild b/arch/hexagon/include/asm/Kbuild
index 0fc9cb0..3401368 100644
--- a/arch/hexagon/include/asm/Kbuild
+++ b/arch/hexagon/include/asm/Kbuild
@@ -1,4 +1,3 @@
-generic-y += auxvec.h
generic-y += barrier.h
generic-y += bug.h
generic-y += bugs.h
@@ -7,53 +6,32 @@
generic-y += device.h
generic-y += div64.h
generic-y += emergency-restart.h
-generic-y += errno.h
generic-y += extable.h
generic-y += fb.h
-generic-y += fcntl.h
generic-y += ftrace.h
generic-y += hardirq.h
generic-y += hw_irq.h
-generic-y += ioctl.h
-generic-y += ioctls.h
generic-y += iomap.h
-generic-y += ipcbuf.h
generic-y += irq_regs.h
generic-y += irq_work.h
generic-y += kdebug.h
generic-y += kmap_types.h
+generic-y += kprobes.h
generic-y += local.h
generic-y += local64.h
generic-y += mcs_spinlock.h
generic-y += mm-arch-hooks.h
-generic-y += mman.h
-generic-y += msgbuf.h
generic-y += pci.h
generic-y += percpu.h
-generic-y += poll.h
-generic-y += posix_types.h
generic-y += preempt.h
-generic-y += resource.h
generic-y += rwsem.h
generic-y += sections.h
generic-y += segment.h
-generic-y += sembuf.h
generic-y += serial.h
-generic-y += shmbuf.h
-generic-y += shmparam.h
generic-y += sizes.h
-generic-y += socket.h
-generic-y += sockios.h
-generic-y += stat.h
-generic-y += statfs.h
-generic-y += termbits.h
-generic-y += termios.h
generic-y += topology.h
generic-y += trace_clock.h
-generic-y += types.h
-generic-y += ucontext.h
generic-y += unaligned.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h
-generic-y += kprobes.h
diff --git a/arch/hexagon/include/uapi/asm/Kbuild b/arch/hexagon/include/uapi/asm/Kbuild
index b55fc2a..cb5df3a 100644
--- a/arch/hexagon/include/uapi/asm/Kbuild
+++ b/arch/hexagon/include/uapi/asm/Kbuild
@@ -1,4 +1,26 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
+generic-y += auxvec.h
+generic-y += errno.h
+generic-y += fcntl.h
+generic-y += ioctl.h
+generic-y += ioctls.h
+generic-y += ipcbuf.h
+generic-y += mman.h
+generic-y += msgbuf.h
+generic-y += poll.h
+generic-y += posix_types.h
+generic-y += resource.h
+generic-y += sembuf.h
+generic-y += shmbuf.h
+generic-y += shmparam.h
generic-y += siginfo.h
+generic-y += socket.h
+generic-y += sockios.h
+generic-y += stat.h
+generic-y += statfs.h
+generic-y += termbits.h
+generic-y += termios.h
+generic-y += types.h
+generic-y += ucontext.h
diff --git a/arch/ia64/include/asm/Kbuild b/arch/ia64/include/asm/Kbuild
index 502a91d..1d7641f 100644
--- a/arch/ia64/include/asm/Kbuild
+++ b/arch/ia64/include/asm/Kbuild
@@ -1,8 +1,6 @@
-
generic-y += clkdev.h
generic-y += exec.h
generic-y += irq_work.h
-generic-y += kvm_para.h
generic-y += mcs_spinlock.h
generic-y += mm-arch-hooks.h
generic-y += preempt.h
diff --git a/arch/ia64/include/asm/uaccess.h b/arch/ia64/include/asm/uaccess.h
index b2106b0..0890ded 100644
--- a/arch/ia64/include/asm/uaccess.h
+++ b/arch/ia64/include/asm/uaccess.h
@@ -87,42 +87,6 @@
#define __put_user(x, ptr) __put_user_nocheck((__typeof__(*(ptr))) (x), (ptr), sizeof(*(ptr)))
#define __get_user(x, ptr) __get_user_nocheck((x), (ptr), sizeof(*(ptr)))
-extern long __put_user_unaligned_unknown (void);
-
-#define __put_user_unaligned(x, ptr) \
-({ \
- long __ret; \
- switch (sizeof(*(ptr))) { \
- case 1: __ret = __put_user((x), (ptr)); break; \
- case 2: __ret = (__put_user((x), (u8 __user *)(ptr))) \
- | (__put_user((x) >> 8, ((u8 __user *)(ptr) + 1))); break; \
- case 4: __ret = (__put_user((x), (u16 __user *)(ptr))) \
- | (__put_user((x) >> 16, ((u16 __user *)(ptr) + 1))); break; \
- case 8: __ret = (__put_user((x), (u32 __user *)(ptr))) \
- | (__put_user((x) >> 32, ((u32 __user *)(ptr) + 1))); break; \
- default: __ret = __put_user_unaligned_unknown(); \
- } \
- __ret; \
-})
-
-extern long __get_user_unaligned_unknown (void);
-
-#define __get_user_unaligned(x, ptr) \
-({ \
- long __ret; \
- switch (sizeof(*(ptr))) { \
- case 1: __ret = __get_user((x), (ptr)); break; \
- case 2: __ret = (__get_user((x), (u8 __user *)(ptr))) \
- | (__get_user((x) >> 8, ((u8 __user *)(ptr) + 1))); break; \
- case 4: __ret = (__get_user((x), (u16 __user *)(ptr))) \
- | (__get_user((x) >> 16, ((u16 __user *)(ptr) + 1))); break; \
- case 8: __ret = (__get_user((x), (u32 __user *)(ptr))) \
- | (__get_user((x) >> 32, ((u32 __user *)(ptr) + 1))); break; \
- default: __ret = __get_user_unaligned_unknown(); \
- } \
- __ret; \
-})
-
#ifdef ASM_SUPPORTED
struct __large_struct { unsigned long buf[100]; };
# define __m(x) (*(struct __large_struct __user *)(x))
diff --git a/arch/ia64/kernel/machine_kexec.c b/arch/ia64/kernel/machine_kexec.c
index 599507b..c14815d 100644
--- a/arch/ia64/kernel/machine_kexec.c
+++ b/arch/ia64/kernel/machine_kexec.c
@@ -163,8 +163,3 @@
#endif
}
-phys_addr_t paddr_vmcoreinfo_note(void)
-{
- return ia64_tpa((unsigned long)(char *)&vmcoreinfo_note);
-}
-
diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c
index 79c7c46..555b111 100644
--- a/arch/ia64/kernel/mca.c
+++ b/arch/ia64/kernel/mca.c
@@ -334,7 +334,7 @@
ia64_mlogbuf_dump();
}
-static void inline
+static inline void
ia64_mca_spin(const char *func)
{
if (monarch_cpu == smp_processor_id())
diff --git a/arch/ia64/sn/pci/pcibr/pcibr_ate.c b/arch/ia64/sn/pci/pcibr/pcibr_ate.c
index 5bc34ea..b67bb4c 100644
--- a/arch/ia64/sn/pci/pcibr/pcibr_ate.c
+++ b/arch/ia64/sn/pci/pcibr/pcibr_ate.c
@@ -140,7 +140,7 @@
/*
* Update the ate.
*/
-void inline
+inline void
ate_write(struct pcibus_info *pcibus_info, int ate_index, int count,
volatile u64 ate)
{
diff --git a/arch/ia64/sn/pci/tioce_provider.c b/arch/ia64/sn/pci/tioce_provider.c
index 46d3df4..3bd9abc 100644
--- a/arch/ia64/sn/pci/tioce_provider.c
+++ b/arch/ia64/sn/pci/tioce_provider.c
@@ -52,7 +52,7 @@
* All registers defined in struct tioce will meet that criteria.
*/
-static void inline
+static inline void
tioce_mmr_war_pre(struct tioce_kernel *kern, void __iomem *mmr_addr)
{
u64 mmr_base;
@@ -78,7 +78,7 @@
}
}
-static void inline
+static inline void
tioce_mmr_war_post(struct tioce_kernel *kern, void __iomem *mmr_addr)
{
u64 mmr_base;
diff --git a/arch/m32r/include/asm/Kbuild b/arch/m32r/include/asm/Kbuild
index c000ffa..7e11b12 100644
--- a/arch/m32r/include/asm/Kbuild
+++ b/arch/m32r/include/asm/Kbuild
@@ -1,10 +1,9 @@
-
generic-y += clkdev.h
generic-y += current.h
generic-y += exec.h
generic-y += extable.h
generic-y += irq_work.h
-generic-y += kvm_para.h
+generic-y += kprobes.h
generic-y += mcs_spinlock.h
generic-y += mm-arch-hooks.h
generic-y += module.h
@@ -12,4 +11,3 @@
generic-y += sections.h
generic-y += trace_clock.h
generic-y += word-at-a-time.h
-generic-y += kprobes.h
diff --git a/arch/m32r/include/asm/flat.h b/arch/m32r/include/asm/flat.h
index 5d711c4..455ce7d 100644
--- a/arch/m32r/include/asm/flat.h
+++ b/arch/m32r/include/asm/flat.h
@@ -17,11 +17,6 @@
#define flat_set_persistent(relval, p) 0
#define flat_reloc_valid(reloc, size) \
(((reloc) - textlen_for_m32r_lo16_data) <= (size))
-#define flat_get_addr_from_rp(rp, relval, flags, persistent) \
- m32r_flat_get_addr_from_rp(rp, relval, (text_len) )
-
-#define flat_put_addr_at_rp(rp, addr, relval) \
- m32r_flat_put_addr_at_rp(rp, addr, relval)
/* Convert a relocation entry into an address. */
static inline unsigned long
@@ -57,9 +52,9 @@
static unsigned long textlen_for_m32r_lo16_data = 0;
-static inline unsigned long m32r_flat_get_addr_from_rp (unsigned long *rp,
- unsigned long relval,
- unsigned long textlen)
+static inline unsigned long m32r_flat_get_addr_from_rp (u32 *rp,
+ u32 relval,
+ u32 textlen)
{
unsigned int reloc = flat_m32r_get_reloc_type (relval);
textlen_for_m32r_lo16_data = 0;
@@ -100,9 +95,7 @@
return ~0; /* bogus value */
}
-static inline void m32r_flat_put_addr_at_rp (unsigned long *rp,
- unsigned long addr,
- unsigned long relval)
+static inline void flat_put_addr_at_rp(u32 *rp, u32 addr, u32 relval)
{
unsigned int reloc = flat_m32r_get_reloc_type (relval);
if (reloc & 0xf0) {
@@ -142,4 +135,8 @@
}
}
+// kludge - text_len is a local variable in the only user.
+#define flat_get_addr_from_rp(rp, relval, flags, addr, persistent) \
+ (m32r_flat_get_addr_from_rp(rp, relval, text_len), 0)
+
#endif /* __ASM_M32R_FLAT_H */
diff --git a/arch/m32r/include/uapi/asm/Kbuild b/arch/m32r/include/uapi/asm/Kbuild
index c94ee54..1c44d3b 100644
--- a/arch/m32r/include/uapi/asm/Kbuild
+++ b/arch/m32r/include/uapi/asm/Kbuild
@@ -1,4 +1,5 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-generic-y += siginfo.h
+generic-y += kvm_para.h
+generic-y += siginfo.h
diff --git a/arch/m68k/coldfire/intc-simr.c b/arch/m68k/coldfire/intc-simr.c
index 7cf2c15..15c4b7a 100644
--- a/arch/m68k/coldfire/intc-simr.c
+++ b/arch/m68k/coldfire/intc-simr.c
@@ -35,7 +35,7 @@
#define EINT7 67 /* EDGE Port interrupt 7 */
static unsigned int irqebitmap[] = { 0, 1, 4, 7 };
-static unsigned int inline irq2ebit(unsigned int irq)
+static inline unsigned int irq2ebit(unsigned int irq)
{
return irqebitmap[irq - EINT0];
}
@@ -51,7 +51,7 @@
#define EINT1 65 /* EDGE Port interrupt 1 */
#define EINT7 71 /* EDGE Port interrupt 7 */
-static unsigned int inline irq2ebit(unsigned int irq)
+static inline unsigned int irq2ebit(unsigned int irq)
{
return irq - EINT0;
}
diff --git a/arch/m68k/include/asm/Kbuild b/arch/m68k/include/asm/Kbuild
index 5ecf4e4..59d6d0d 100644
--- a/arch/m68k/include/asm/Kbuild
+++ b/arch/m68k/include/asm/Kbuild
@@ -1,36 +1,25 @@
generic-y += barrier.h
-generic-y += bitsperlong.h
generic-y += clkdev.h
generic-y += device.h
generic-y += emergency-restart.h
-generic-y += errno.h
generic-y += exec.h
generic-y += extable.h
generic-y += futex.h
generic-y += hw_irq.h
-generic-y += ioctl.h
-generic-y += ipcbuf.h
generic-y += irq_regs.h
generic-y += irq_work.h
generic-y += kdebug.h
generic-y += kmap_types.h
-generic-y += kvm_para.h
+generic-y += kprobes.h
generic-y += local.h
generic-y += local64.h
generic-y += mcs_spinlock.h
generic-y += mm-arch-hooks.h
-generic-y += mman.h
generic-y += percpu.h
generic-y += preempt.h
-generic-y += resource.h
generic-y += sections.h
-generic-y += shmparam.h
generic-y += spinlock.h
-generic-y += statfs.h
-generic-y += termios.h
generic-y += topology.h
generic-y += trace_clock.h
-generic-y += types.h
generic-y += word-at-a-time.h
generic-y += xor.h
-generic-y += kprobes.h
diff --git a/arch/m68k/include/asm/flat.h b/arch/m68k/include/asm/flat.h
index 00c392b0..b2a41f5 100644
--- a/arch/m68k/include/asm/flat.h
+++ b/arch/m68k/include/asm/flat.h
@@ -5,16 +5,32 @@
#ifndef __M68KNOMMU_FLAT_H__
#define __M68KNOMMU_FLAT_H__
+#include <linux/uaccess.h>
+
#define flat_argvp_envp_on_stack() 1
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
-#define flat_get_addr_from_rp(rp, relval, flags, p) \
- ({ unsigned long __val; __get_user_unaligned(__val, rp); __val; })
-#define flat_put_addr_at_rp(rp, val, relval) __put_user_unaligned(val, rp)
+static inline int flat_get_addr_from_rp(u32 __user *rp, u32 relval, u32 flags,
+ u32 *addr, u32 *persistent)
+{
+#ifdef CONFIG_CPU_HAS_NO_UNALIGNED
+ return copy_from_user(addr, rp, 4) ? -EFAULT : 0;
+#else
+ return get_user(*addr, rp);
+#endif
+}
+
+static inline int flat_put_addr_at_rp(u32 __user *rp, u32 addr, u32 rel)
+{
+#ifdef CONFIG_CPU_HAS_NO_UNALIGNED
+ return copy_to_user(rp, &addr, 4) ? -EFAULT : 0;
+#else
+ return put_user(addr, rp);
+#endif
+}
#define flat_get_relocate_addr(rel) (rel)
-static inline int flat_set_persistent(unsigned long relval,
- unsigned long *persistent)
+static inline int flat_set_persistent(u32 relval, u32 *persistent)
{
return 0;
}
diff --git a/arch/m68k/include/asm/uaccess.h b/arch/m68k/include/asm/uaccess.h
index 67b3481..63ba18e 100644
--- a/arch/m68k/include/asm/uaccess.h
+++ b/arch/m68k/include/asm/uaccess.h
@@ -3,11 +3,4 @@
#else
#include <asm/uaccess_mm.h>
#endif
-
#include <asm/extable.h>
-#ifdef CONFIG_CPU_HAS_NO_UNALIGNED
-#include <asm-generic/uaccess-unaligned.h>
-#else
-#define __get_user_unaligned(x, ptr) __get_user((x), (ptr))
-#define __put_user_unaligned(x, ptr) __put_user((x), (ptr))
-#endif
diff --git a/arch/m68k/include/uapi/asm/Kbuild b/arch/m68k/include/uapi/asm/Kbuild
index 68b45cc..3717b64 100644
--- a/arch/m68k/include/uapi/asm/Kbuild
+++ b/arch/m68k/include/uapi/asm/Kbuild
@@ -2,11 +2,21 @@
include include/uapi/asm-generic/Kbuild.asm
generic-y += auxvec.h
+generic-y += bitsperlong.h
+generic-y += errno.h
+generic-y += ioctl.h
+generic-y += ipcbuf.h
+generic-y += kvm_para.h
+generic-y += mman.h
generic-y += msgbuf.h
+generic-y += resource.h
generic-y += sembuf.h
generic-y += shmbuf.h
+generic-y += shmparam.h
generic-y += siginfo.h
generic-y += socket.h
generic-y += sockios.h
+generic-y += statfs.h
generic-y += termbits.h
generic-y += termios.h
+generic-y += types.h
diff --git a/arch/metag/include/asm/Kbuild b/arch/metag/include/asm/Kbuild
index 8f94055..3fba97e 100644
--- a/arch/metag/include/asm/Kbuild
+++ b/arch/metag/include/asm/Kbuild
@@ -1,58 +1,34 @@
-generic-y += auxvec.h
-generic-y += bitsperlong.h
generic-y += bugs.h
generic-y += clkdev.h
generic-y += current.h
generic-y += device.h
generic-y += dma.h
generic-y += emergency-restart.h
-generic-y += errno.h
generic-y += exec.h
generic-y += extable.h
generic-y += fb.h
-generic-y += fcntl.h
generic-y += futex.h
generic-y += hardirq.h
generic-y += hw_irq.h
-generic-y += ioctl.h
-generic-y += ioctls.h
-generic-y += ipcbuf.h
generic-y += irq_regs.h
generic-y += irq_work.h
generic-y += kdebug.h
generic-y += kmap_types.h
-generic-y += kvm_para.h
+generic-y += kprobes.h
generic-y += local.h
generic-y += local64.h
generic-y += mcs_spinlock.h
generic-y += mm-arch-hooks.h
-generic-y += msgbuf.h
-generic-y += param.h
generic-y += pci.h
generic-y += percpu.h
-generic-y += poll.h
-generic-y += posix_types.h
generic-y += preempt.h
generic-y += sections.h
-generic-y += sembuf.h
generic-y += serial.h
-generic-y += shmbuf.h
-generic-y += shmparam.h
-generic-y += signal.h
-generic-y += socket.h
-generic-y += sockios.h
-generic-y += stat.h
-generic-y += statfs.h
generic-y += switch_to.h
-generic-y += termbits.h
-generic-y += termios.h
generic-y += timex.h
generic-y += trace_clock.h
-generic-y += types.h
-generic-y += ucontext.h
generic-y += unaligned.h
generic-y += user.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h
-generic-y += kprobes.h
diff --git a/arch/metag/include/uapi/asm/Kbuild b/arch/metag/include/uapi/asm/Kbuild
index b29731e..6ac763d 100644
--- a/arch/metag/include/uapi/asm/Kbuild
+++ b/arch/metag/include/uapi/asm/Kbuild
@@ -1,6 +1,30 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
+generic-y += auxvec.h
+generic-y += bitsperlong.h
+generic-y += errno.h
+generic-y += fcntl.h
+generic-y += ioctl.h
+generic-y += ioctls.h
+generic-y += ipcbuf.h
+generic-y += kvm_para.h
generic-y += mman.h
+generic-y += msgbuf.h
+generic-y += param.h
+generic-y += poll.h
+generic-y += posix_types.h
generic-y += resource.h
+generic-y += sembuf.h
generic-y += setup.h
+generic-y += shmbuf.h
+generic-y += shmparam.h
+generic-y += signal.h
+generic-y += socket.h
+generic-y += sockios.h
+generic-y += stat.h
+generic-y += statfs.h
+generic-y += termbits.h
+generic-y += termios.h
+generic-y += types.h
+generic-y += ucontext.h
diff --git a/arch/microblaze/include/asm/Kbuild b/arch/microblaze/include/asm/Kbuild
index 83a4ef3..9d66f77 100644
--- a/arch/microblaze/include/asm/Kbuild
+++ b/arch/microblaze/include/asm/Kbuild
@@ -1,22 +1,15 @@
-
generic-y += barrier.h
generic-y += bitops.h
-generic-y += bitsperlong.h
generic-y += bug.h
generic-y += bugs.h
generic-y += clkdev.h
generic-y += device.h
generic-y += div64.h
generic-y += emergency-restart.h
-generic-y += errno.h
generic-y += exec.h
generic-y += extable.h
generic-y += fb.h
-generic-y += fcntl.h
generic-y += hardirq.h
-generic-y += ioctl.h
-generic-y += ioctls.h
-generic-y += ipcbuf.h
generic-y += irq_regs.h
generic-y += irq_work.h
generic-y += kdebug.h
@@ -27,31 +20,13 @@
generic-y += local64.h
generic-y += mcs_spinlock.h
generic-y += mm-arch-hooks.h
-generic-y += mman.h
-generic-y += msgbuf.h
-generic-y += param.h
generic-y += parport.h
generic-y += percpu.h
-generic-y += poll.h
generic-y += preempt.h
-generic-y += resource.h
-generic-y += sembuf.h
generic-y += serial.h
-generic-y += shmbuf.h
-generic-y += shmparam.h
-generic-y += siginfo.h
-generic-y += signal.h
-generic-y += socket.h
-generic-y += sockios.h
-generic-y += stat.h
-generic-y += statfs.h
-generic-y += swab.h
generic-y += syscalls.h
-generic-y += termbits.h
-generic-y += termios.h
generic-y += topology.h
generic-y += trace_clock.h
-generic-y += ucontext.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h
diff --git a/arch/microblaze/include/asm/flat.h b/arch/microblaze/include/asm/flat.h
index 6847c15..f23c3d2 100644
--- a/arch/microblaze/include/asm/flat.h
+++ b/arch/microblaze/include/asm/flat.h
@@ -32,29 +32,27 @@
* reference
*/
-static inline unsigned long
-flat_get_addr_from_rp(unsigned long *rp, unsigned long relval,
- unsigned long flags, unsigned long *persistent)
+static inline int flat_get_addr_from_rp(u32 __user *rp, u32 relval, u32 flags,
+ u32 *addr, u32 *persistent)
{
- unsigned long addr;
- (void)flags;
+ u32 *p = (__force u32 *)rp;
/* Is it a split 64/32 reference? */
if (relval & 0x80000000) {
/* Grab the two halves of the reference */
- unsigned long val_hi, val_lo;
+ u32 val_hi, val_lo;
- val_hi = get_unaligned(rp);
- val_lo = get_unaligned(rp+1);
+ val_hi = get_unaligned(p);
+ val_lo = get_unaligned(p+1);
/* Crack the address out */
- addr = ((val_hi & 0xffff) << 16) + (val_lo & 0xffff);
+ *addr = ((val_hi & 0xffff) << 16) + (val_lo & 0xffff);
} else {
/* Get the address straight out */
- addr = get_unaligned(rp);
+ *addr = get_unaligned(p);
}
- return addr;
+ return 0;
}
/*
@@ -63,25 +61,27 @@
*/
static inline void
-flat_put_addr_at_rp(unsigned long *rp, unsigned long addr, unsigned long relval)
+flat_put_addr_at_rp(u32 __user *rp, u32 addr, u32 relval)
{
+ u32 *p = (__force u32 *)rp;
/* Is this a split 64/32 reloc? */
if (relval & 0x80000000) {
/* Get the two "halves" */
- unsigned long val_hi = get_unaligned(rp);
- unsigned long val_lo = get_unaligned(rp + 1);
+ unsigned long val_hi = get_unaligned(p);
+ unsigned long val_lo = get_unaligned(p + 1);
/* insert the address */
val_hi = (val_hi & 0xffff0000) | addr >> 16;
val_lo = (val_lo & 0xffff0000) | (addr & 0xffff);
/* store the two halves back into memory */
- put_unaligned(val_hi, rp);
- put_unaligned(val_lo, rp+1);
+ put_unaligned(val_hi, p);
+ put_unaligned(val_lo, p+1);
} else {
/* Put it straight in, no messing around */
- put_unaligned(addr, rp);
+ put_unaligned(addr, p);
}
+ return 0;
}
#define flat_get_relocate_addr(rel) (rel & 0x7fffffff)
diff --git a/arch/microblaze/include/uapi/asm/Kbuild b/arch/microblaze/include/uapi/asm/Kbuild
index cb6784f..e77a596 100644
--- a/arch/microblaze/include/uapi/asm/Kbuild
+++ b/arch/microblaze/include/uapi/asm/Kbuild
@@ -1,5 +1,28 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-generic-y += types.h
+generic-y += bitsperlong.h
+generic-y += errno.h
+generic-y += fcntl.h
+generic-y += ioctl.h
+generic-y += ioctls.h
+generic-y += ipcbuf.h
+generic-y += mman.h
+generic-y += msgbuf.h
+generic-y += param.h
+generic-y += poll.h
+generic-y += resource.h
+generic-y += sembuf.h
+generic-y += shmbuf.h
+generic-y += shmparam.h
generic-y += siginfo.h
+generic-y += signal.h
+generic-y += socket.h
+generic-y += sockios.h
+generic-y += stat.h
+generic-y += statfs.h
+generic-y += swab.h
+generic-y += termbits.h
+generic-y += termios.h
+generic-y += types.h
+generic-y += ucontext.h
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 45bcd1c..8dd2035 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1,75 +1,77 @@
config MIPS
bool
default y
- select ARCH_SUPPORTS_UPROBES
+ select ARCH_BINFMT_ELF_STATE
+ select ARCH_CLOCKSOURCE_DATA
+ select ARCH_DISCARD_MEMBLOCK
+ select ARCH_HAS_ELF_RANDOMIZE
+ select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
select ARCH_MIGHT_HAVE_PC_PARPORT
select ARCH_MIGHT_HAVE_PC_SERIO
- select ARCH_USE_CMPXCHG_LOCKREF if 64BIT
+ select ARCH_SUPPORTS_UPROBES
select ARCH_USE_BUILTIN_BSWAP
- select HAVE_CONTEXT_TRACKING
- select HAVE_GENERIC_DMA_COHERENT
- select HAVE_IDE
- select HAVE_IRQ_EXIT_ON_IRQ_STACK
- select HAVE_OPROFILE
- select HAVE_PERF_EVENTS
- select PERF_USE_VMALLOC
+ select ARCH_USE_CMPXCHG_LOCKREF if 64BIT
+ select ARCH_USE_QUEUED_RWLOCKS
+ select ARCH_USE_QUEUED_SPINLOCKS
+ select ARCH_WANT_IPC_PARSE_VERSION
+ select BUILDTIME_EXTABLE_SORT
+ select CLONE_BACKWARDS
+ select CPU_PM if CPU_IDLE
+ select GENERIC_ATOMIC64 if !64BIT
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_CMOS_UPDATE
+ select GENERIC_CPU_AUTOPROBE
+ select GENERIC_IRQ_PROBE
+ select GENERIC_IRQ_SHOW
+ select GENERIC_PCI_IOMAP
+ select GENERIC_SCHED_CLOCK if !CAVIUM_OCTEON_SOC
+ select GENERIC_SMP_IDLE_THREAD
+ select GENERIC_TIME_VSYSCALL
+ select HANDLE_DOMAIN_IRQ
+ select HAVE_ARCH_JUMP_LABEL
select HAVE_ARCH_KGDB
select HAVE_ARCH_MMAP_RND_BITS if MMU
select HAVE_ARCH_MMAP_RND_COMPAT_BITS if MMU && COMPAT
select HAVE_ARCH_SECCOMP_FILTER
select HAVE_ARCH_TRACEHOOK
- select HAVE_CBPF_JIT if !CPU_MICROMIPS
- select HAVE_FUNCTION_TRACER
- select HAVE_DYNAMIC_FTRACE
- select HAVE_FTRACE_MCOUNT_RECORD
+ select HAVE_ARCH_TRANSPARENT_HUGEPAGE if CPU_SUPPORTS_HUGEPAGES && 64BIT
+ select HAVE_CBPF_JIT if (!64BIT && !CPU_MICROMIPS)
+ select HAVE_EBPF_JIT if (64BIT && !CPU_MICROMIPS)
+ select HAVE_CC_STACKPROTECTOR
+ select HAVE_CONTEXT_TRACKING
+ select HAVE_COPY_THREAD_TLS
select HAVE_C_RECORDMCOUNT
+ select HAVE_DEBUG_KMEMLEAK
+ select HAVE_DEBUG_STACKOVERFLOW
+ select HAVE_DMA_API_DEBUG
+ select HAVE_DMA_CONTIGUOUS
+ select HAVE_DYNAMIC_FTRACE
+ select HAVE_EXIT_THREAD
+ select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_FUNCTION_GRAPH_TRACER
+ select HAVE_FUNCTION_TRACER
+ select HAVE_GENERIC_DMA_COHERENT
+ select HAVE_IDE
+ select HAVE_IRQ_EXIT_ON_IRQ_STACK
+ select HAVE_IRQ_TIME_ACCOUNTING
select HAVE_KPROBES
select HAVE_KRETPROBES
- select HAVE_SYSCALL_TRACEPOINTS
- select HAVE_DEBUG_KMEMLEAK
- select HAVE_SYSCALL_TRACEPOINTS
- select ARCH_HAS_ELF_RANDOMIZE
- select HAVE_ARCH_TRANSPARENT_HUGEPAGE if CPU_SUPPORTS_HUGEPAGES && 64BIT
- select RTC_LIB if !MACH_LOONGSON64
- select GENERIC_ATOMIC64 if !64BIT
- select HAVE_DMA_CONTIGUOUS
- select HAVE_DMA_API_DEBUG
- select GENERIC_IRQ_PROBE
- select GENERIC_IRQ_SHOW
- select GENERIC_PCI_IOMAP
- select HAVE_ARCH_JUMP_LABEL
- select ARCH_WANT_IPC_PARSE_VERSION
- select IRQ_FORCED_THREADING
select HAVE_MEMBLOCK
select HAVE_MEMBLOCK_NODE_MAP
- select ARCH_DISCARD_MEMBLOCK
- select GENERIC_SMP_IDLE_THREAD
- select BUILDTIME_EXTABLE_SORT
- select GENERIC_CPU_AUTOPROBE
- select GENERIC_CLOCKEVENTS
- select GENERIC_SCHED_CLOCK if !CAVIUM_OCTEON_SOC
- select GENERIC_CMOS_UPDATE
select HAVE_MOD_ARCH_SPECIFIC
select HAVE_NMI
- select VIRT_TO_BUS
- select MODULES_USE_ELF_REL if MODULES
- select MODULES_USE_ELF_RELA if MODULES && 64BIT
- select CLONE_BACKWARDS
- select HAVE_DEBUG_STACKOVERFLOW
- select HAVE_CC_STACKPROTECTOR
- select CPU_PM if CPU_IDLE
- select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
- select ARCH_BINFMT_ELF_STATE
- select SYSCTL_EXCEPTION_TRACE
- select HAVE_VIRT_CPU_ACCOUNTING_GEN
- select HAVE_IRQ_TIME_ACCOUNTING
- select GENERIC_TIME_VSYSCALL
- select ARCH_CLOCKSOURCE_DATA
- select HANDLE_DOMAIN_IRQ
- select HAVE_EXIT_THREAD
+ select HAVE_OPROFILE
+ select HAVE_PERF_EVENTS
select HAVE_REGS_AND_STACK_ACCESS_API
- select HAVE_COPY_THREAD_TLS
+ select HAVE_SYSCALL_TRACEPOINTS
+ select HAVE_VIRT_CPU_ACCOUNTING_GEN
+ select IRQ_FORCED_THREADING
+ select MODULES_USE_ELF_RELA if MODULES && 64BIT
+ select MODULES_USE_ELF_REL if MODULES
+ select PERF_USE_VMALLOC
+ select RTC_LIB if !MACH_LOONGSON64
+ select SYSCTL_EXCEPTION_TRACE
+ select VIRT_TO_BUS
menu "Machine selection"
@@ -1179,6 +1181,15 @@
The platform must provide plat_get_fdt() if it selects CONFIG_USE_OF
to allow access to command line and entropy sources.
+config MIPS_CBPF_JIT
+ def_bool y
+ depends on BPF_JIT && HAVE_CBPF_JIT
+
+config MIPS_EBPF_JIT
+ def_bool y
+ depends on BPF_JIT && HAVE_EBPF_JIT
+
+
#
# Endianness selection. Sufficiently obscure so many users don't know what to
# answer,so we try hard to limit the available choices. Also the use of a
@@ -2062,7 +2073,7 @@
bool
config MIPS_PGD_C0_CONTEXT
bool
- default y if 64BIT && CPU_MIPSR2 && !CPU_XLP
+ default y if 64BIT && (CPU_MIPSR2 || CPU_MIPSR6) && !CPU_XLP
#
# Set to y for ptrace access to watch registers.
@@ -2370,6 +2381,7 @@
select SMP
select SYNC_R4K if (CEVT_R4K || CSRC_R4K)
select SYS_SUPPORTS_HOTPLUG_CPU
+ select SYS_SUPPORTS_SCHED_SMT if CPU_MIPSR6
select SYS_SUPPORTS_SMP
select WEAK_ORDERING
help
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 02a1787..0434362 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -160,7 +160,7 @@
-Wa,-mips32 -Wa,--trap
cflags-$(CONFIG_CPU_MIPS32_R2) += $(call cc-option,-march=mips32r2,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
-Wa,-mips32r2 -Wa,--trap
-cflags-$(CONFIG_CPU_MIPS32_R6) += -march=mips32r6 -Wa,--trap
+cflags-$(CONFIG_CPU_MIPS32_R6) += -march=mips32r6 -Wa,--trap -modd-spreg
cflags-$(CONFIG_CPU_MIPS64_R1) += $(call cc-option,-march=mips64,-mips64 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \
-Wa,-mips64 -Wa,--trap
cflags-$(CONFIG_CPU_MIPS64_R2) += $(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \
diff --git a/arch/mips/boot/dts/img/Makefile b/arch/mips/boot/dts/img/Makefile
index 69a65f0..3d70958 100644
--- a/arch/mips/boot/dts/img/Makefile
+++ b/arch/mips/boot/dts/img/Makefile
@@ -1,6 +1,7 @@
-dtb-$(CONFIG_MACH_PISTACHIO) += pistachio_marduk.dtb
+dtb-$(CONFIG_FIT_IMAGE_FDT_BOSTON) += boston.dtb
-obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
+dtb-$(CONFIG_MACH_PISTACHIO) += pistachio_marduk.dtb
+obj-$(CONFIG_MACH_PISTACHIO) += pistachio_marduk.dtb.o
# Force kbuild to make empty built-in.o if necessary
obj- += dummy.o
diff --git a/arch/mips/boot/dts/img/boston.dts b/arch/mips/boot/dts/img/boston.dts
new file mode 100644
index 0000000..53bfa29
--- /dev/null
+++ b/arch/mips/boot/dts/img/boston.dts
@@ -0,0 +1,224 @@
+/dts-v1/;
+
+#include <dt-bindings/clock/boston-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/mips-gic.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "img,boston";
+
+ chosen {
+ stdout-path = "uart0:115200";
+ };
+
+ aliases {
+ uart0 = &uart0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "img,mips";
+ reg = <0>;
+ clocks = <&clk_boston BOSTON_CLK_CPU>;
+ };
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+
+ pci0: pci@10000000 {
+ compatible = "xlnx,axi-pcie-host-1.00.a";
+ device_type = "pci";
+ reg = <0x10000000 0x2000000>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 2 IRQ_TYPE_LEVEL_HIGH>;
+
+ ranges = <0x02000000 0 0x40000000
+ 0x40000000 0 0x40000000>;
+
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pci0_intc 1>,
+ <0 0 0 2 &pci0_intc 2>,
+ <0 0 0 3 &pci0_intc 3>,
+ <0 0 0 4 &pci0_intc 4>;
+
+ pci0_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ pci1: pci@12000000 {
+ compatible = "xlnx,axi-pcie-host-1.00.a";
+ device_type = "pci";
+ reg = <0x12000000 0x2000000>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 1 IRQ_TYPE_LEVEL_HIGH>;
+
+ ranges = <0x02000000 0 0x20000000
+ 0x20000000 0 0x20000000>;
+
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pci1_intc 1>,
+ <0 0 0 2 &pci1_intc 2>,
+ <0 0 0 3 &pci1_intc 3>,
+ <0 0 0 4 &pci1_intc 4>;
+
+ pci1_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ pci2: pci@14000000 {
+ compatible = "xlnx,axi-pcie-host-1.00.a";
+ device_type = "pci";
+ reg = <0x14000000 0x2000000>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 0 IRQ_TYPE_LEVEL_HIGH>;
+
+ ranges = <0x02000000 0 0x16000000
+ 0x16000000 0 0x100000>;
+
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pci2_intc 1>,
+ <0 0 0 2 &pci2_intc 2>,
+ <0 0 0 3 &pci2_intc 3>,
+ <0 0 0 4 &pci2_intc 4>;
+
+ pci2_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+
+ pci2_root@0,0,0 {
+ compatible = "pci10ee,7021";
+ reg = <0x00000000 0 0 0 0>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ eg20t_bridge@1,0,0 {
+ compatible = "pci8086,8800";
+ reg = <0x00010000 0 0 0 0>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ eg20t_mac@2,0,1 {
+ compatible = "pci8086,8802";
+ reg = <0x00020100 0 0 0 0>;
+ phy-reset-gpios = <&eg20t_gpio 6
+ GPIO_ACTIVE_LOW>;
+ };
+
+ eg20t_gpio: eg20t_gpio@2,0,2 {
+ compatible = "pci8086,8803";
+ reg = <0x00020200 0 0 0 0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ eg20t_i2c@2,12,2 {
+ compatible = "pci8086,8817";
+ reg = <0x00026200 0 0 0 0>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@0x68 {
+ compatible = "st,m41t81s";
+ reg = <0x68>;
+ };
+ };
+ };
+ };
+ };
+
+ gic: interrupt-controller@16120000 {
+ compatible = "mti,gic";
+ reg = <0x16120000 0x20000>;
+
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ timer {
+ compatible = "mti,gic-timer";
+ interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+ clocks = <&clk_boston BOSTON_CLK_CPU>;
+ };
+ };
+
+ cdmm@16140000 {
+ compatible = "mti,mips-cdmm";
+ reg = <0x16140000 0x8000>;
+ };
+
+ cpc@16200000 {
+ compatible = "mti,mips-cpc";
+ reg = <0x16200000 0x8000>;
+ };
+
+ plat_regs: system-controller@17ffd000 {
+ compatible = "img,boston-platform-regs", "syscon";
+ reg = <0x17ffd000 0x1000>;
+
+ clk_boston: clock {
+ compatible = "img,boston-clock";
+ #clock-cells = <1>;
+ };
+ };
+
+ reboot: syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&plat_regs>;
+ offset = <0x10>;
+ mask = <0x10>;
+ };
+
+ uart0: uart@17ffe000 {
+ compatible = "ns16550a";
+ reg = <0x17ffe000 0x1000>;
+ reg-shift = <2>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&clk_boston BOSTON_CLK_SYS>;
+ };
+
+ lcd: lcd@17fff000 {
+ compatible = "img,boston-lcd";
+ reg = <0x17fff000 0x8>;
+ };
+};
diff --git a/arch/mips/boot/dts/mti/sead3.dts b/arch/mips/boot/dts/mti/sead3.dts
index b112879..4f8bc83 100644
--- a/arch/mips/boot/dts/mti/sead3.dts
+++ b/arch/mips/boot/dts/mti/sead3.dts
@@ -11,15 +11,14 @@
#size-cells = <1>;
compatible = "mti,sead-3";
model = "MIPS SEAD-3";
- interrupt-parent = <&gic>;
chosen {
- stdout-path = "uart1:115200";
+ stdout-path = "serial1:115200";
};
aliases {
- uart0 = &uart0;
- uart1 = &uart1;
+ serial0 = &uart0;
+ serial1 = &uart1;
};
cpus {
@@ -54,18 +53,14 @@
* controller & should be probed first.
*/
interrupt-parent = <&cpu_intc>;
-
- timer {
- compatible = "mti,gic-timer";
- interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
- };
};
ehci@1b200000 {
compatible = "generic-ehci";
reg = <0x1b200000 0x1000>;
- interrupts = <0>; /* GIC 0 or CPU 6 */
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 0 IRQ_TYPE_LEVEL_HIGH>; /* GIC 0 or CPU 6 */
has-transaction-translator;
};
@@ -227,7 +222,8 @@
clock-frequency = <14745600>;
- interrupts = <3>; /* GIC 3 or CPU 4 */
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>; /* GIC 3 or CPU 4 */
no-loopback-test;
};
@@ -241,7 +237,8 @@
clock-frequency = <14745600>;
- interrupts = <2>; /* GIC 2 or CPU 4 */
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 2 IRQ_TYPE_LEVEL_HIGH>; /* GIC 2 or CPU 4 */
no-loopback-test;
};
@@ -251,7 +248,8 @@
reg = <0x1f010000 0x10000>;
reg-io-width = <4>;
- interrupts = <0>; /* GIC 0 or CPU 6 */
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 0 IRQ_TYPE_LEVEL_HIGH>; /* GIC 0 or CPU 6 */
phy-mode = "mii";
smsc,irq-push-pull;
diff --git a/arch/mips/configs/ar7_defconfig b/arch/mips/configs/ar7_defconfig
index 320772c..92fca3c 100644
--- a/arch/mips/configs/ar7_defconfig
+++ b/arch/mips/configs/ar7_defconfig
@@ -3,7 +3,6 @@
CONFIG_HZ_100=y
CONFIG_KEXEC=y
# CONFIG_SECCOMP is not set
-CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_KERNEL_LZMA=y
CONFIG_SYSVIPC=y
@@ -41,7 +40,6 @@
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
@@ -86,7 +84,6 @@
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
@@ -99,8 +96,6 @@
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_CPMAC=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
@@ -142,7 +137,6 @@
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_FS=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
CONFIG_CRYPTO=y
diff --git a/arch/mips/configs/ath79_defconfig b/arch/mips/configs/ath79_defconfig
index 134879c..25ed914 100644
--- a/arch/mips/configs/ath79_defconfig
+++ b/arch/mips/configs/ath79_defconfig
@@ -7,7 +7,6 @@
CONFIG_ATH79_MACH_UBNT_XM=y
CONFIG_HZ_100=y
# CONFIG_SECCOMP is not set
-CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_HIGH_RES_TIMERS=y
@@ -35,7 +34,6 @@
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
CONFIG_CFG80211=m
CONFIG_MAC80211=m
diff --git a/arch/mips/configs/bcm63xx_defconfig b/arch/mips/configs/bcm63xx_defconfig
index 5599a9f..131b350 100644
--- a/arch/mips/configs/bcm63xx_defconfig
+++ b/arch/mips/configs/bcm63xx_defconfig
@@ -5,7 +5,6 @@
CONFIG_BCM63XX_CPU_6358=y
CONFIG_NO_HZ=y
# CONFIG_SECCOMP is not set
-CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_TINY_RCU=y
@@ -33,7 +32,6 @@
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
CONFIG_CFG80211=y
@@ -50,13 +48,10 @@
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP=y
# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
CONFIG_NETDEVICES=y
CONFIG_BCM63XX_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_BCM63XX_ENET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
CONFIG_B43=y
# CONFIG_B43_PHY_LP is not set
# CONFIG_INPUT is not set
@@ -70,7 +65,6 @@
# CONFIG_HWMON is not set
# CONFIG_VGA_ARB is not set
CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_OHCI_HCD=y
@@ -84,7 +78,6 @@
CONFIG_PROC_KCORE=y
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_MAGIC_SYSRQ=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,115200"
# CONFIG_CRYPTO_HW is not set
diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig
index d20b09d..a55009e 100644
--- a/arch/mips/configs/bigsur_defconfig
+++ b/arch/mips/configs/bigsur_defconfig
@@ -4,7 +4,6 @@
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_HZ_1000=y
-CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
@@ -60,7 +59,6 @@
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
-# CONFIG_INET_LRO is not set
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
@@ -182,7 +180,6 @@
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QFMT_V2=m
-CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_ISO9660_FS=m
@@ -284,7 +281,6 @@
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRC_T10DIF=m
CONFIG_CRC7=m
diff --git a/arch/mips/configs/bmips_be_defconfig b/arch/mips/configs/bmips_be_defconfig
index acf7785..a7072a1 100644
--- a/arch/mips/configs/bmips_be_defconfig
+++ b/arch/mips/configs/bmips_be_defconfig
@@ -23,7 +23,6 @@
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
CONFIG_CFG80211=y
CONFIG_NL80211_TESTMODE=y
diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig
index 2924ba3..bd80b5c 100644
--- a/arch/mips/configs/capcella_defconfig
+++ b/arch/mips/configs/capcella_defconfig
@@ -1,6 +1,5 @@
CONFIG_MACH_VR41XX=y
CONFIG_ZAO_CAPCELLA=y
-CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -46,8 +45,6 @@
CONFIG_NET_ETHERNET=y
CONFIG_NET_PCI=y
CONFIG_8139TOO=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
@@ -59,7 +56,6 @@
CONFIG_GPIO_VR41XX=y
# CONFIG_HWMON is not set
# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_VR41XX=y
diff --git a/arch/mips/configs/cavium_octeon_defconfig b/arch/mips/configs/cavium_octeon_defconfig
index d4fda41..e5b18f1 100644
--- a/arch/mips/configs/cavium_octeon_defconfig
+++ b/arch/mips/configs/cavium_octeon_defconfig
@@ -42,7 +42,6 @@
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
CONFIG_IPV6=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
diff --git a/arch/mips/configs/ci20_defconfig b/arch/mips/configs/ci20_defconfig
index 43e0ba2..b42cfa7 100644
--- a/arch/mips/configs/ci20_defconfig
+++ b/arch/mips/configs/ci20_defconfig
@@ -41,7 +41,6 @@
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig
index 23b6693..a9066f3 100644
--- a/arch/mips/configs/cobalt_defconfig
+++ b/arch/mips/configs/cobalt_defconfig
@@ -1,5 +1,4 @@
CONFIG_MIPS_COBALT=y
-CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
@@ -15,17 +14,14 @@
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
-# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP=y
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_MISC_DEVICES is not set
CONFIG_RAID_ATTRS=y
CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_LOWLEVEL is not set
@@ -36,8 +32,6 @@
CONFIG_NET_TULIP=y
CONFIG_DE2104X=y
CONFIG_TULIP=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_KEYBOARD is not set
@@ -56,7 +50,6 @@
# CONFIG_VGA_CONSOLE is not set
CONFIG_HID=m
CONFIG_USB=m
-# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_OHCI_HCD=m
@@ -84,6 +77,5 @@
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_CRC16=y
CONFIG_LIBCRC32C=y
diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig
index 2b6cb41..e149f78901 100644
--- a/arch/mips/configs/decstation_defconfig
+++ b/arch/mips/configs/decstation_defconfig
@@ -1,6 +1,5 @@
CONFIG_MACH_DECSTATION=y
CONFIG_CPU_R3000=y
-CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig
index e94d266..c3ac020 100644
--- a/arch/mips/configs/e55_defconfig
+++ b/arch/mips/configs/e55_defconfig
@@ -1,6 +1,5 @@
CONFIG_MACH_VR41XX=y
CONFIG_CASIO_E55=y
-CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -28,7 +27,6 @@
CONFIG_GPIO_VR41XX=y
# CONFIG_HWMON is not set
# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_VR41XX=y
diff --git a/arch/mips/configs/fuloong2e_defconfig b/arch/mips/configs/fuloong2e_defconfig
index 8743589..499f514 100644
--- a/arch/mips/configs/fuloong2e_defconfig
+++ b/arch/mips/configs/fuloong2e_defconfig
@@ -3,7 +3,6 @@
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_EXPERIMENTAL=y
CONFIG_LOCALVERSION="-fuloong2e"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
@@ -47,7 +46,6 @@
CONFIG_NET_IPGRE_BROADCAST=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
@@ -79,7 +77,6 @@
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
@@ -88,7 +85,6 @@
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
@@ -101,7 +97,6 @@
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_FW_LOADER=m
CONFIG_MTD=m
-CONFIG_MTD_CHAR=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
@@ -163,7 +158,6 @@
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_VIAPRO=m
# CONFIG_HWMON is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FB_RADEON=y
# CONFIG_FB_RADEON_I2C is not set
@@ -184,7 +178,6 @@
CONFIG_USB_MOUSE=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_OTG_WHITELIST=y
CONFIG_USB_WUSB_CBAF=m
CONFIG_USB_C67X00_HCD=m
@@ -201,7 +194,6 @@
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_ONETOUCH=y
CONFIG_USB_STORAGE_CYPRESS_ATACB=y
-CONFIG_USB_LIBUSUAL=y
CONFIG_USB_SEVSEG=m
CONFIG_USB_ISIGHTFW=m
CONFIG_UIO=m
@@ -215,7 +207,6 @@
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_REISERFS_FS=m
-CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
CONFIG_ISO9660_FS=m
@@ -256,8 +247,6 @@
CONFIG_NLS_UTF8=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_DEBUG_FS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_CCM=m
diff --git a/arch/mips/configs/generic/board-boston.config b/arch/mips/configs/generic/board-boston.config
new file mode 100644
index 0000000..19560a4
--- /dev/null
+++ b/arch/mips/configs/generic/board-boston.config
@@ -0,0 +1,48 @@
+CONFIG_FIT_IMAGE_FDT_BOSTON=y
+
+CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+
+CONFIG_AUXDISPLAY=y
+CONFIG_IMG_ASCII_LCD=y
+
+CONFIG_COMMON_CLK_BOSTON=y
+
+CONFIG_DMADEVICES=y
+CONFIG_PCH_DMA=y
+
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_PCH=y
+
+CONFIG_I2C=y
+CONFIG_I2C_EG20T=y
+
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PCI=y
+
+CONFIG_NETDEVICES=y
+CONFIG_PCH_GBE=y
+
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCIE_XILINX=y
+
+CONFIG_PCH_PHUB=y
+
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_M41T80=y
+
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+
+CONFIG_SPI=y
+CONFIG_SPI_TOPCLIFF_PCH=y
+
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
diff --git a/arch/mips/configs/gpr_defconfig b/arch/mips/configs/gpr_defconfig
index e24feb0..b191181 100644
--- a/arch/mips/configs/gpr_defconfig
+++ b/arch/mips/configs/gpr_defconfig
@@ -2,7 +2,6 @@
CONFIG_MIPS_GPR=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
@@ -59,7 +58,6 @@
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
@@ -68,7 +66,6 @@
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
@@ -166,7 +163,6 @@
CONFIG_CFG80211=y
CONFIG_MAC80211=y
CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
@@ -200,8 +196,6 @@
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_MIPS_AU1X00_ENET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
CONFIG_ATH_COMMON=y
CONFIG_ATH_DEBUG=y
CONFIG_ATH5K=y
@@ -286,14 +280,12 @@
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_MON=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_STORAGE=m
-CONFIG_USB_LIBUSUAL=y
CONFIG_USB_SERIAL=y
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig
index ec8e968..83e8fe2 100644
--- a/arch/mips/configs/ip22_defconfig
+++ b/arch/mips/configs/ip22_defconfig
@@ -4,7 +4,6 @@
CONFIG_HIGH_RES_TIMERS=y
CONFIG_HZ_1000=y
CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
@@ -46,7 +45,6 @@
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
-# CONFIG_INET_LRO is not set
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
@@ -139,7 +137,6 @@
CONFIG_IP_VS_NQ=m
CONFIG_IP_VS_FTP=m
CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
@@ -148,7 +145,6 @@
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
@@ -163,7 +159,6 @@
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
@@ -174,7 +169,6 @@
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
@@ -215,7 +209,6 @@
CONFIG_CONNECTOR=m
CONFIG_CDROM_PKTCDVD=m
CONFIG_ATA_OVER_ETH=m
-# CONFIG_MISC_DEVICES is not set
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
@@ -245,8 +238,6 @@
CONFIG_NET_ETHERNET=y
CONFIG_SMC91X=m
CONFIG_SGISEEQ=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
CONFIG_HOSTAP=m
CONFIG_INPUT_MOUSEDEV=m
CONFIG_MOUSE_PS2=m
@@ -286,7 +277,6 @@
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QFMT_V2=m
-CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_ISO9660_FS=m
@@ -355,7 +345,6 @@
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_KEYS=y
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_NULL=m
diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index e582069..a0d5932 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -5,7 +5,6 @@
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_HZ_1000=y
-CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_IKCONFIG=y
@@ -104,7 +103,6 @@
CONFIG_BLK_DEV_OSD=m
CONFIG_CDROM_PKTCDVD=m
CONFIG_ATA_OVER_ETH=m
-# CONFIG_MISC_DEVICES is not set
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
@@ -325,7 +323,6 @@
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
-CONFIG_AUTOFS_FS=m
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_FSCACHE=m
@@ -342,7 +339,6 @@
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_DLM=m
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_KEYS=y
CONFIG_SECURITYFS=y
CONFIG_CRYPTO_FIPS=y
@@ -378,7 +374,6 @@
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_DEV_HIFN_795X=m
CONFIG_CRC_T10DIF=m
diff --git a/arch/mips/configs/ip28_defconfig b/arch/mips/configs/ip28_defconfig
index 4dbf626..d0a4c2c 100644
--- a/arch/mips/configs/ip28_defconfig
+++ b/arch/mips/configs/ip28_defconfig
@@ -1,7 +1,6 @@
CONFIG_SGI_IP28=y
CONFIG_ARC_CONSOLE=y
CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
@@ -35,10 +34,8 @@
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
CONFIG_TCP_MD5SIG=y
# CONFIG_IPV6 is not set
-# CONFIG_MISC_DEVICES is not set
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=y
@@ -48,8 +45,6 @@
CONFIG_DUMMY=m
CONFIG_NET_ETHERNET=y
CONFIG_SGISEEQ=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
# CONFIG_MOUSE_PS2_ALPS is not set
# CONFIG_MOUSE_PS2_SYNAPTICS is not set
CONFIG_VT_HW_CONSOLE_BINDING=y
diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig
index f9af98f..1e26e58 100644
--- a/arch/mips/configs/ip32_defconfig
+++ b/arch/mips/configs/ip32_defconfig
@@ -1,6 +1,5 @@
CONFIG_SGI_IP32=y
# CONFIG_SECCOMP is not set
-CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
@@ -38,7 +37,6 @@
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
-# CONFIG_INET_LRO is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_MD5SIG=y
CONFIG_INET6_AH=m
@@ -76,8 +74,6 @@
CONFIG_DE2104X=m
CONFIG_TULIP=m
CONFIG_TULIP_MMIO=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_MACEPS2=y
@@ -87,7 +83,6 @@
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_WATCHDOG=y
-CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_GBE=y
@@ -117,7 +112,6 @@
CONFIG_QUOTA=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
-CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_ISO9660_FS=m
@@ -178,8 +172,6 @@
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KEYS=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_CBC=y
diff --git a/arch/mips/configs/jazz_defconfig b/arch/mips/configs/jazz_defconfig
index 3019fce..9ad1c94 100644
--- a/arch/mips/configs/jazz_defconfig
+++ b/arch/mips/configs/jazz_defconfig
@@ -1,7 +1,6 @@
CONFIG_MACH_JAZZ=y
CONFIG_OLIVETTI_M700=y
CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
@@ -85,7 +84,6 @@
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
@@ -94,7 +92,6 @@
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
@@ -109,7 +106,6 @@
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
@@ -120,7 +116,6 @@
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
@@ -276,7 +271,6 @@
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
-CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_ISO9660_FS=m
diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig
index 9bc08f2..af12281 100644
--- a/arch/mips/configs/jmr3927_defconfig
+++ b/arch/mips/configs/jmr3927_defconfig
@@ -18,23 +18,18 @@
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP=y
-# CONFIG_MISC_DEVICES is not set
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_NET_PCI=y
CONFIG_TC35815=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
@@ -58,5 +53,3 @@
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
diff --git a/arch/mips/configs/lasat_defconfig b/arch/mips/configs/lasat_defconfig
index e620a2c..947a35c 100644
--- a/arch/mips/configs/lasat_defconfig
+++ b/arch/mips/configs/lasat_defconfig
@@ -5,7 +5,6 @@
CONFIG_LASAT_SYSCTL=y
CONFIG_HZ_1000=y
# CONFIG_SECCOMP is not set
-CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EXPERT=y
@@ -31,7 +30,6 @@
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_AMDSTD=y
@@ -44,8 +42,6 @@
CONFIG_NET_ETHERNET=y
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
@@ -56,7 +52,6 @@
# CONFIG_SERIAL_8250_PCI is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
-# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig
index 8df80c6..1ec8ed8 100644
--- a/arch/mips/configs/lemote2f_defconfig
+++ b/arch/mips/configs/lemote2f_defconfig
@@ -7,7 +7,6 @@
CONFIG_PREEMPT=y
CONFIG_KEXEC=y
# CONFIG_SECCOMP is not set
-CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
@@ -83,8 +82,6 @@
CONFIG_NET_EMATCH=y
CONFIG_NET_CLS_ACT=y
CONFIG_BT=m
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
@@ -142,7 +139,6 @@
# CONFIG_8139TOO_PIO is not set
CONFIG_R8169=y
CONFIG_R8169_VLAN=y
-# CONFIG_NETDEV_10000 is not set
CONFIG_USB_USBNET=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_NETCONSOLE=m
@@ -205,7 +201,6 @@
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
# CONFIG_RADIO_ADAPTERS is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_MODE_HELPERS=y
@@ -290,7 +285,6 @@
CONFIG_HID_ZEROPLUS=m
CONFIG_ZEROPLUS_FF=y
CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_OTG_WHITELIST=y
CONFIG_USB_MON=y
@@ -313,10 +307,8 @@
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
-CONFIG_USB_LIBUSUAL=y
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_LED=m
CONFIG_USB_GADGET=m
CONFIG_USB_GADGET_M66592=y
CONFIG_MMC=m
@@ -341,7 +333,6 @@
CONFIG_BTRFS_FS=m
CONFIG_QUOTA=y
CONFIG_QFMT_V2=m
-CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FSCACHE=m
CONFIG_CACHEFILES=m
@@ -407,8 +398,6 @@
CONFIG_FRAME_WARN=1024
CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_FS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KEYS=y
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_NULL=m
@@ -446,6 +435,5 @@
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRC_T10DIF=y
diff --git a/arch/mips/configs/loongson3_defconfig b/arch/mips/configs/loongson3_defconfig
index 7f95c4b..324dfee 100644
--- a/arch/mips/configs/loongson3_defconfig
+++ b/arch/mips/configs/loongson3_defconfig
@@ -95,7 +95,6 @@
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
@@ -252,7 +251,6 @@
CONFIG_USB_VIDEO_CLASS=m
CONFIG_DRM=y
CONFIG_DRM_RADEON=y
-CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB_RADEON=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_PLATFORM=m
@@ -335,7 +333,6 @@
CONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_RCU_CPU_STALL_VERBOSE is not set
# CONFIG_FTRACE is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
diff --git a/arch/mips/configs/malta_kvm_defconfig b/arch/mips/configs/malta_kvm_defconfig
index e233f87..80ecd94 100644
--- a/arch/mips/configs/malta_kvm_defconfig
+++ b/arch/mips/configs/malta_kvm_defconfig
@@ -133,7 +133,6 @@
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
diff --git a/arch/mips/configs/malta_kvm_guest_defconfig b/arch/mips/configs/malta_kvm_guest_defconfig
index fbe085c..35ad1f8 100644
--- a/arch/mips/configs/malta_kvm_guest_defconfig
+++ b/arch/mips/configs/malta_kvm_guest_defconfig
@@ -132,7 +132,6 @@
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
diff --git a/arch/mips/configs/malta_qemu_32r6_defconfig b/arch/mips/configs/malta_qemu_32r6_defconfig
index cbf37dd..77145ec 100644
--- a/arch/mips/configs/malta_qemu_32r6_defconfig
+++ b/arch/mips/configs/malta_qemu_32r6_defconfig
@@ -42,7 +42,6 @@
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
-# CONFIG_INET_LRO is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
diff --git a/arch/mips/configs/maltaaprp_defconfig b/arch/mips/configs/maltaaprp_defconfig
index 35f6ba2..cc2687c 100644
--- a/arch/mips/configs/maltaaprp_defconfig
+++ b/arch/mips/configs/maltaaprp_defconfig
@@ -43,7 +43,6 @@
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
-# CONFIG_INET_LRO is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
@@ -135,7 +134,6 @@
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_SYSCON=y
# CONFIG_HWMON is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_MATROX=y
diff --git a/arch/mips/configs/maltasmvp_defconfig b/arch/mips/configs/maltasmvp_defconfig
index 900f145..55b68b9 100644
--- a/arch/mips/configs/maltasmvp_defconfig
+++ b/arch/mips/configs/maltasmvp_defconfig
@@ -46,7 +46,6 @@
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
-# CONFIG_INET_LRO is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
diff --git a/arch/mips/configs/maltasmvp_eva_defconfig b/arch/mips/configs/maltasmvp_eva_defconfig
index 8e2738b..5ca590c 100644
--- a/arch/mips/configs/maltasmvp_eva_defconfig
+++ b/arch/mips/configs/maltasmvp_eva_defconfig
@@ -47,7 +47,6 @@
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
-# CONFIG_INET_LRO is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
@@ -140,7 +139,6 @@
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_SYSCON=y
# CONFIG_HWMON is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_MATROX=y
diff --git a/arch/mips/configs/maltaup_defconfig b/arch/mips/configs/maltaup_defconfig
index 6dc4e30..7ea7c0b 100644
--- a/arch/mips/configs/maltaup_defconfig
+++ b/arch/mips/configs/maltaup_defconfig
@@ -42,7 +42,6 @@
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
-# CONFIG_INET_LRO is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
@@ -134,7 +133,6 @@
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_SYSCON=y
# CONFIG_HWMON is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_MATROX=y
diff --git a/arch/mips/configs/markeins_defconfig b/arch/mips/configs/markeins_defconfig
index 0f08e46..43ce657 100644
--- a/arch/mips/configs/markeins_defconfig
+++ b/arch/mips/configs/markeins_defconfig
@@ -1,7 +1,6 @@
CONFIG_NEC_MARKEINS=y
CONFIG_HZ_1000=y
CONFIG_PREEMPT=y
-CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
@@ -92,7 +91,6 @@
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
@@ -117,7 +115,6 @@
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
@@ -125,7 +122,6 @@
CONFIG_FW_LOADER=m
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_AMDSTD=y
diff --git a/arch/mips/configs/mips_paravirt_defconfig b/arch/mips/configs/mips_paravirt_defconfig
index 84cfcb4..accf0db 100644
--- a/arch/mips/configs/mips_paravirt_defconfig
+++ b/arch/mips/configs/mips_paravirt_defconfig
@@ -39,7 +39,6 @@
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
CONFIG_IPV6=y
# CONFIG_WIRELESS is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig
index a2c045f..3486b03 100644
--- a/arch/mips/configs/mpc30x_defconfig
+++ b/arch/mips/configs/mpc30x_defconfig
@@ -1,6 +1,5 @@
CONFIG_MACH_VR41XX=y
CONFIG_VICTOR_MPC30X=y
-CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
@@ -31,8 +30,6 @@
CONFIG_ATA=y
CONFIG_PATA_LEGACY=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
CONFIG_USB_PEGASUS=m
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
@@ -45,13 +42,11 @@
CONFIG_GPIO_VR41XX=y
# CONFIG_HWMON is not set
# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
CONFIG_USB=m
CONFIG_USB_OHCI_HCD=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_VR41XX=y
CONFIG_EXT2_FS=y
-CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_PROC_KCORE=y
CONFIG_CONFIGFS_FS=m
diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig
index 201edfb..3c8c16b 100644
--- a/arch/mips/configs/msp71xx_defconfig
+++ b/arch/mips/configs/msp71xx_defconfig
@@ -2,7 +2,6 @@
CONFIG_PMC_MSP7120_GW=y
CONFIG_CPU_MIPS32_R2=y
CONFIG_PREEMPT=y
-CONFIG_EXPERIMENTAL=y
CONFIG_LOCALVERSION="-pmc"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
@@ -38,7 +37,6 @@
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_AMDSTD=y
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index f3f6005..4011f18 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -1,7 +1,6 @@
CONFIG_MIPS_ALCHEMY=y
CONFIG_MIPS_MTX1=y
CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
@@ -81,7 +80,6 @@
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
@@ -90,7 +88,6 @@
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
@@ -98,7 +95,6 @@
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
@@ -108,7 +104,6 @@
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
@@ -225,8 +220,6 @@
CONFIG_VLSI_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=m
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
@@ -246,7 +239,6 @@
CONFIG_BT_HCIVHCI=m
CONFIG_CONNECTOR=m
CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
@@ -257,7 +249,6 @@
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=65536
-# CONFIG_MISC_DEVICES is not set
CONFIG_SCSI=m
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_SG=m
@@ -596,7 +587,6 @@
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_KARMA=m
-CONFIG_USB_LIBUSUAL=y
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
CONFIG_USB_SERIAL=m
@@ -640,7 +630,6 @@
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
-CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
diff --git a/arch/mips/configs/nlm_xlp_defconfig b/arch/mips/configs/nlm_xlp_defconfig
index 07d0182..5720ce2 100644
--- a/arch/mips/configs/nlm_xlp_defconfig
+++ b/arch/mips/configs/nlm_xlp_defconfig
@@ -6,7 +6,6 @@
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_SMP=y
# CONFIG_SECCOMP is not set
-CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
@@ -183,14 +182,12 @@
CONFIG_IP_VS_NQ=m
CONFIG_IP_VS_FTP=m
CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
@@ -317,7 +314,6 @@
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
@@ -607,7 +603,6 @@
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRC_CCITT=m
CONFIG_CRC7=m
diff --git a/arch/mips/configs/nlm_xlr_defconfig b/arch/mips/configs/nlm_xlr_defconfig
index f59969a..fea56c5 100644
--- a/arch/mips/configs/nlm_xlr_defconfig
+++ b/arch/mips/configs/nlm_xlr_defconfig
@@ -7,7 +7,6 @@
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_KEXEC=y
-CONFIG_EXPERIMENTAL=y
CONFIG_CROSS_COMPILE=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
@@ -163,7 +162,6 @@
CONFIG_IP_VS_NQ=m
CONFIG_IP_VS_FTP=m
CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
@@ -171,7 +169,6 @@
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
@@ -186,7 +183,6 @@
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
@@ -197,7 +193,6 @@
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
@@ -308,7 +303,6 @@
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_CDROM_PKTCDVD=y
-CONFIG_MISC_DEVICES=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
@@ -369,7 +363,6 @@
CONFIG_RTC_DRV_DS1374=y
# CONFIG_HWMON is not set
# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_UIO=y
CONFIG_UIO_PDRV=m
@@ -522,7 +515,6 @@
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_SCHED_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KGDB=y
@@ -568,7 +560,6 @@
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRC_CCITT=m
CONFIG_CRC7=m
diff --git a/arch/mips/configs/pnx8335_stb225_defconfig b/arch/mips/configs/pnx8335_stb225_defconfig
index c887066..81b5eb8 100644
--- a/arch/mips/configs/pnx8335_stb225_defconfig
+++ b/arch/mips/configs/pnx8335_stb225_defconfig
@@ -5,7 +5,6 @@
CONFIG_HZ_128=y
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_SECCOMP is not set
-CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
@@ -27,12 +26,10 @@
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_INET_AH=y
-# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
@@ -41,15 +38,12 @@
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP=y
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_MISC_DEVICES is not set
CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m
@@ -94,4 +88,3 @@
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_UTF8=m
-CONFIG_SYSCTL_SYSCALL_CHECK=y
diff --git a/arch/mips/configs/qi_lb60_defconfig b/arch/mips/configs/qi_lb60_defconfig
index d7bb8cc..3f13335 100644
--- a/arch/mips/configs/qi_lb60_defconfig
+++ b/arch/mips/configs/qi_lb60_defconfig
@@ -34,7 +34,6 @@
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
@@ -109,7 +108,6 @@
CONFIG_USB_ETH=y
# CONFIG_USB_ETH_RNDIS is not set
CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_MMC_JZ4740=y
CONFIG_RTC_CLASS=y
@@ -183,7 +181,6 @@
# CONFIG_FTRACE is not set
CONFIG_KGDB=y
CONFIG_RUNTIME_DEBUG=y
-CONFIG_CRYPTO_ZLIB=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_FONTS=y
CONFIG_FONT_SUN8x16=y
diff --git a/arch/mips/configs/rb532_defconfig b/arch/mips/configs/rb532_defconfig
index 5d9d708..6fa56c6 100644
--- a/arch/mips/configs/rb532_defconfig
+++ b/arch/mips/configs/rb532_defconfig
@@ -3,7 +3,6 @@
CONFIG_HIGH_RES_TIMERS=y
CONFIG_HZ_100=y
# CONFIG_SECCOMP is not set
-CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
@@ -39,7 +38,6 @@
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_CUBIC=m
@@ -114,7 +112,6 @@
CONFIG_HAMRADIO=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_BLOCK2MTD=y
CONFIG_MTD_NAND=y
@@ -129,8 +126,6 @@
CONFIG_KORINA=y
CONFIG_NET_PCI=y
CONFIG_VIA_RHINE=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
CONFIG_ATMEL=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
@@ -183,7 +178,6 @@
CONFIG_STRIP_ASM_SYMS=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_ZLIB=y
# CONFIG_CRYPTO_HW is not set
CONFIG_CRC16=m
CONFIG_LIBCRC32C=m
diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig
index 43d55e5..fb195e2 100644
--- a/arch/mips/configs/rbtx49xx_defconfig
+++ b/arch/mips/configs/rbtx49xx_defconfig
@@ -31,12 +31,10 @@
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_MTD_CFI=y
@@ -50,7 +48,6 @@
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_MISC_DEVICES is not set
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE_TX4938=y
CONFIG_BLK_DEV_IDE_TX4939=y
@@ -60,8 +57,6 @@
CONFIG_NE2000=y
CONFIG_NET_PCI=y
CONFIG_TC35815=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
# CONFIG_WLAN is not set
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
@@ -108,5 +103,3 @@
CONFIG_ROOT_NFS=y
CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_FS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig
index c2b4e3f..99679e5 100644
--- a/arch/mips/configs/rm200_defconfig
+++ b/arch/mips/configs/rm200_defconfig
@@ -3,7 +3,6 @@
CONFIG_ARC_CONSOLE=y
CONFIG_HZ_1000=y
CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
@@ -94,7 +93,6 @@
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
@@ -103,7 +101,6 @@
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
@@ -118,7 +115,6 @@
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
@@ -129,7 +125,6 @@
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
@@ -214,7 +209,6 @@
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
-CONFIG_BLK_DEV_UB=m
CONFIG_BLK_DEV_RAM=m
CONFIG_CDROM_PKTCDVD=m
CONFIG_ATA_OVER_ETH=m
@@ -353,7 +347,6 @@
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
-CONFIG_USB_LED=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_LD=m
@@ -366,7 +359,6 @@
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
-CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_ISO9660_FS=m
diff --git a/arch/mips/configs/rt305x_defconfig b/arch/mips/configs/rt305x_defconfig
index d14ae2f..c695b7b 100644
--- a/arch/mips/configs/rt305x_defconfig
+++ b/arch/mips/configs/rt305x_defconfig
@@ -5,7 +5,6 @@
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_HZ_100=y
# CONFIG_SECCOMP is not set
-CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_HIGH_RES_TIMERS=y
@@ -44,7 +43,6 @@
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
diff --git a/arch/mips/configs/sb1250_swarm_defconfig b/arch/mips/configs/sb1250_swarm_defconfig
index 7fca09fe..c724bdd 100644
--- a/arch/mips/configs/sb1250_swarm_defconfig
+++ b/arch/mips/configs/sb1250_swarm_defconfig
@@ -4,7 +4,6 @@
CONFIG_SMP=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_HZ_1000=y
-CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_CGROUPS=y
diff --git a/arch/mips/configs/tb0219_defconfig b/arch/mips/configs/tb0219_defconfig
index 11f5150..4041597 100644
--- a/arch/mips/configs/tb0219_defconfig
+++ b/arch/mips/configs/tb0219_defconfig
@@ -1,6 +1,5 @@
CONFIG_MACH_VR41XX=y
CONFIG_TANBAC_TB0219=y
-CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
@@ -31,7 +30,6 @@
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
@@ -40,7 +38,6 @@
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_XIP=y
-# CONFIG_MISC_DEVICES is not set
CONFIG_NETDEVICES=y
CONFIG_PHYLIB=m
CONFIG_MARVELL_PHY=m
@@ -57,7 +54,6 @@
CONFIG_VIA_RHINE_MMIO=y
CONFIG_R8169=y
CONFIG_VIA_VELOCITY=y
-# CONFIG_NETDEV_10000 is not set
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
@@ -70,7 +66,6 @@
CONFIG_GPIO_TB0219=y
# CONFIG_HWMON is not set
# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
CONFIG_USB=m
CONFIG_USB_MON=m
CONFIG_USB_EHCI_HCD=m
@@ -91,6 +86,5 @@
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig
index 9327b3a..565f044 100644
--- a/arch/mips/configs/tb0226_defconfig
+++ b/arch/mips/configs/tb0226_defconfig
@@ -1,6 +1,5 @@
CONFIG_MACH_VR41XX=y
CONFIG_TANBAC_TB0226=y
-CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
@@ -29,7 +28,6 @@
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
@@ -37,7 +35,6 @@
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_XIP=y
-# CONFIG_MISC_DEVICES is not set
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
@@ -49,8 +46,6 @@
CONFIG_NET_ETHERNET=y
CONFIG_NET_PCI=y
CONFIG_E100=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
@@ -66,7 +61,6 @@
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -87,7 +81,6 @@
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="cca=3 mem=32M console=ttyVR0,115200"
CONFIG_CRC32=m
diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig
index a967289..a702be6 100644
--- a/arch/mips/configs/tb0287_defconfig
+++ b/arch/mips/configs/tb0287_defconfig
@@ -1,5 +1,4 @@
CONFIG_MACH_VR41XX=y
-CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
@@ -31,7 +30,6 @@
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=m
@@ -43,7 +41,6 @@
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_XIP=y
-# CONFIG_MISC_DEVICES is not set
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_SCAN_ASYNC=y
# CONFIG_SCSI_LOWLEVEL is not set
@@ -64,7 +61,6 @@
CONFIG_VIA_RHINE_MMIO=y
CONFIG_R8169=y
CONFIG_VIA_VELOCITY=y
-# CONFIG_NETDEV_10000 is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
@@ -76,7 +72,6 @@
CONFIG_GPIO_VR41XX=y
# CONFIG_HWMON is not set
CONFIG_MFD_SM501=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FB_SM501=y
# CONFIG_VGA_CONSOLE is not set
diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig
index ee4b2be..a84eac4 100644
--- a/arch/mips/configs/workpad_defconfig
+++ b/arch/mips/configs/workpad_defconfig
@@ -1,6 +1,5 @@
CONFIG_MACH_VR41XX=y
CONFIG_IBM_WORKPAD=y
-CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -28,13 +27,10 @@
# CONFIG_IPV6 is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_BLK_DEV_RAM=m
-# CONFIG_MISC_DEVICES is not set
CONFIG_IDE=y
CONFIG_BLK_DEV_IDECS=m
CONFIG_IDE_GENERIC=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
diff --git a/arch/mips/generic/Kconfig b/arch/mips/generic/Kconfig
index a606b3f..51ffbba 100644
--- a/arch/mips/generic/Kconfig
+++ b/arch/mips/generic/Kconfig
@@ -9,11 +9,31 @@
kernel is booted without being provided with an FDT via the UHI
boot protocol.
+config YAMON_DT_SHIM
+ bool
+ help
+ Select this from your board if the board uses the YAMON bootloader
+ and you wish to include code which helps translate various
+ YAMON-provided environment variables into a device tree properties.
+
+comment "Legacy (non-UHI/non-FIT) Boards"
+
config LEGACY_BOARD_SEAD3
bool "Support MIPS SEAD-3 boards"
select LEGACY_BOARDS
+ select YAMON_DT_SHIM
help
Enable this to include support for booting on MIPS SEAD-3 FPGA-based
development boards, which boot using a legacy boot protocol.
+comment "FIT/UHI Boards"
+
+config FIT_IMAGE_FDT_BOSTON
+ bool "Include FDT for MIPS Boston boards"
+ help
+ Enable this to include the FDT for the MIPS Boston development board
+ from Imagination Technologies in the FIT kernel image. You should
+ enable this if you wish to boot on a MIPS Boston board, as it is
+ expected by the bootloader.
+
endif
diff --git a/arch/mips/generic/Makefile b/arch/mips/generic/Makefile
index acb9b6d..56b3ea5 100644
--- a/arch/mips/generic/Makefile
+++ b/arch/mips/generic/Makefile
@@ -12,5 +12,6 @@
obj-y += irq.o
obj-y += proc.o
+obj-$(CONFIG_YAMON_DT_SHIM) += yamon-dt.o
obj-$(CONFIG_LEGACY_BOARD_SEAD3) += board-sead3.o
obj-$(CONFIG_KEXEC) += kexec.o
diff --git a/arch/mips/generic/board-sead3.c b/arch/mips/generic/board-sead3.c
index f4ae058..f109a6b 100644
--- a/arch/mips/generic/board-sead3.c
+++ b/arch/mips/generic/board-sead3.c
@@ -13,10 +13,12 @@
#include <linux/errno.h>
#include <linux/libfdt.h>
#include <linux/printk.h>
+#include <linux/sizes.h>
#include <asm/fw/fw.h>
#include <asm/io.h>
#include <asm/machine.h>
+#include <asm/yamon-dt.h>
#define SEAD_CONFIG CKSEG1ADDR(0x1b100110)
#define SEAD_CONFIG_GIC_PRESENT BIT(1)
@@ -25,6 +27,15 @@
#define MIPS_REVISION_MACHINE (0xf << 4)
#define MIPS_REVISION_MACHINE_SEAD3 (0x4 << 4)
+/*
+ * Maximum 384MB RAM at physical address 0, preceding any I/O.
+ */
+static struct yamon_mem_region mem_regions[] __initdata = {
+ /* start size */
+ { 0, SZ_256M + SZ_128M },
+ {}
+};
+
static __init bool sead3_detect(void)
{
uint32_t rev;
@@ -33,96 +44,9 @@
return (rev & MIPS_REVISION_MACHINE) == MIPS_REVISION_MACHINE_SEAD3;
}
-static __init int append_cmdline(void *fdt)
-{
- int err, chosen_off;
-
- /* find or add chosen node */
- chosen_off = fdt_path_offset(fdt, "/chosen");
- if (chosen_off == -FDT_ERR_NOTFOUND)
- chosen_off = fdt_path_offset(fdt, "/chosen@0");
- if (chosen_off == -FDT_ERR_NOTFOUND)
- chosen_off = fdt_add_subnode(fdt, 0, "chosen");
- if (chosen_off < 0) {
- pr_err("Unable to find or add DT chosen node: %d\n",
- chosen_off);
- return chosen_off;
- }
-
- err = fdt_setprop_string(fdt, chosen_off, "bootargs", fw_getcmdline());
- if (err) {
- pr_err("Unable to set bootargs property: %d\n", err);
- return err;
- }
-
- return 0;
-}
-
static __init int append_memory(void *fdt)
{
- unsigned long phys_memsize, memsize;
- __be32 mem_array[2];
- int err, mem_off;
- char *var;
-
- /* find memory size from the bootloader environment */
- var = fw_getenv("memsize");
- if (var) {
- err = kstrtoul(var, 0, &phys_memsize);
- if (err) {
- pr_err("Failed to read memsize env variable '%s'\n",
- var);
- return -EINVAL;
- }
- } else {
- pr_warn("The bootloader didn't provide memsize: defaulting to 32MB\n");
- phys_memsize = 32 << 20;
- }
-
- /* default to using all available RAM */
- memsize = phys_memsize;
-
- /* allow the user to override the usable memory */
- var = strstr(arcs_cmdline, "memsize=");
- if (var)
- memsize = memparse(var + strlen("memsize="), NULL);
-
- /* if the user says there's more RAM than we thought, believe them */
- phys_memsize = max_t(unsigned long, phys_memsize, memsize);
-
- /* find or add a memory node */
- mem_off = fdt_path_offset(fdt, "/memory");
- if (mem_off == -FDT_ERR_NOTFOUND)
- mem_off = fdt_add_subnode(fdt, 0, "memory");
- if (mem_off < 0) {
- pr_err("Unable to find or add memory DT node: %d\n", mem_off);
- return mem_off;
- }
-
- err = fdt_setprop_string(fdt, mem_off, "device_type", "memory");
- if (err) {
- pr_err("Unable to set memory node device_type: %d\n", err);
- return err;
- }
-
- mem_array[0] = 0;
- mem_array[1] = cpu_to_be32(phys_memsize);
- err = fdt_setprop(fdt, mem_off, "reg", mem_array, sizeof(mem_array));
- if (err) {
- pr_err("Unable to set memory regs property: %d\n", err);
- return err;
- }
-
- mem_array[0] = 0;
- mem_array[1] = cpu_to_be32(memsize);
- err = fdt_setprop(fdt, mem_off, "linux,usable-memory",
- mem_array, sizeof(mem_array));
- if (err) {
- pr_err("Unable to set linux,usable-memory property: %d\n", err);
- return err;
- }
-
- return 0;
+ return yamon_dt_append_memory(fdt, mem_regions);
}
static __init int remove_gic(void *fdt)
@@ -163,14 +87,16 @@
return -EINVAL;
}
- err = fdt_setprop_u32(fdt, 0, "interrupt-parent", cpu_phandle);
- if (err) {
- pr_err("unable to set root interrupt-parent: %d\n", err);
- return err;
- }
-
uart_off = fdt_node_offset_by_compatible(fdt, -1, "ns16550a");
while (uart_off >= 0) {
+ err = fdt_setprop_u32(fdt, uart_off, "interrupt-parent",
+ cpu_phandle);
+ if (err) {
+ pr_warn("unable to set UART interrupt-parent: %d\n",
+ err);
+ return err;
+ }
+
err = fdt_setprop_u32(fdt, uart_off, "interrupts",
cpu_uart_int);
if (err) {
@@ -193,6 +119,12 @@
return eth_off;
}
+ err = fdt_setprop_u32(fdt, eth_off, "interrupt-parent", cpu_phandle);
+ if (err) {
+ pr_err("unable to set ethernet interrupt-parent: %d\n", err);
+ return err;
+ }
+
err = fdt_setprop_u32(fdt, eth_off, "interrupts", cpu_eth_int);
if (err) {
pr_err("unable to set ethernet interrupts property: %d\n", err);
@@ -205,6 +137,12 @@
return ehci_off;
}
+ err = fdt_setprop_u32(fdt, ehci_off, "interrupt-parent", cpu_phandle);
+ if (err) {
+ pr_err("unable to set EHCI interrupt-parent: %d\n", err);
+ return err;
+ }
+
err = fdt_setprop_u32(fdt, ehci_off, "interrupts", cpu_ehci_int);
if (err) {
pr_err("unable to set EHCI interrupts property: %d\n", err);
@@ -214,84 +152,13 @@
return 0;
}
-static __init int serial_config(void *fdt)
-{
- const char *yamontty, *mode_var;
- char mode_var_name[9], path[18], parity;
- unsigned int uart, baud, stop_bits;
- bool hw_flow;
- int chosen_off, err;
-
- yamontty = fw_getenv("yamontty");
- if (!yamontty || !strcmp(yamontty, "tty0")) {
- uart = 0;
- } else if (!strcmp(yamontty, "tty1")) {
- uart = 1;
- } else {
- pr_warn("yamontty environment variable '%s' invalid\n",
- yamontty);
- uart = 0;
- }
-
- baud = stop_bits = 0;
- parity = 0;
- hw_flow = false;
-
- snprintf(mode_var_name, sizeof(mode_var_name), "modetty%u", uart);
- mode_var = fw_getenv(mode_var_name);
- if (mode_var) {
- while (mode_var[0] >= '0' && mode_var[0] <= '9') {
- baud *= 10;
- baud += mode_var[0] - '0';
- mode_var++;
- }
- if (mode_var[0] == ',')
- mode_var++;
- if (mode_var[0])
- parity = mode_var[0];
- if (mode_var[0] == ',')
- mode_var++;
- if (mode_var[0])
- stop_bits = mode_var[0] - '0';
- if (mode_var[0] == ',')
- mode_var++;
- if (!strcmp(mode_var, "hw"))
- hw_flow = true;
- }
-
- if (!baud)
- baud = 38400;
-
- if (parity != 'e' && parity != 'n' && parity != 'o')
- parity = 'n';
-
- if (stop_bits != 7 && stop_bits != 8)
- stop_bits = 8;
-
- WARN_ON(snprintf(path, sizeof(path), "uart%u:%u%c%u%s",
- uart, baud, parity, stop_bits,
- hw_flow ? "r" : "") >= sizeof(path));
-
- /* find or add chosen node */
- chosen_off = fdt_path_offset(fdt, "/chosen");
- if (chosen_off == -FDT_ERR_NOTFOUND)
- chosen_off = fdt_path_offset(fdt, "/chosen@0");
- if (chosen_off == -FDT_ERR_NOTFOUND)
- chosen_off = fdt_add_subnode(fdt, 0, "chosen");
- if (chosen_off < 0) {
- pr_err("Unable to find or add DT chosen node: %d\n",
- chosen_off);
- return chosen_off;
- }
-
- err = fdt_setprop_string(fdt, chosen_off, "stdout-path", path);
- if (err) {
- pr_err("Unable to set stdout-path property: %d\n", err);
- return err;
- }
-
- return 0;
-}
+static const struct mips_fdt_fixup sead3_fdt_fixups[] __initconst = {
+ { yamon_dt_append_cmdline, "append command line" },
+ { append_memory, "append memory" },
+ { remove_gic, "remove GIC when not present" },
+ { yamon_dt_serial_config, "append serial configuration" },
+ { },
+};
static __init const void *sead3_fixup_fdt(const void *fdt,
const void *match_data)
@@ -307,29 +174,10 @@
fw_init_cmdline();
- err = fdt_open_into(fdt, fdt_buf, sizeof(fdt_buf));
+ err = apply_mips_fdt_fixups(fdt_buf, sizeof(fdt_buf),
+ fdt, sead3_fdt_fixups);
if (err)
- panic("Unable to open FDT: %d", err);
-
- err = append_cmdline(fdt_buf);
- if (err)
- panic("Unable to patch FDT: %d", err);
-
- err = append_memory(fdt_buf);
- if (err)
- panic("Unable to patch FDT: %d", err);
-
- err = remove_gic(fdt_buf);
- if (err)
- panic("Unable to patch FDT: %d", err);
-
- err = serial_config(fdt_buf);
- if (err)
- panic("Unable to patch FDT: %d", err);
-
- err = fdt_pack(fdt_buf);
- if (err)
- panic("Unable to pack FDT: %d\n", err);
+ panic("Unable to fixup FDT: %d", err);
return fdt_buf;
}
diff --git a/arch/mips/generic/init.c b/arch/mips/generic/init.c
index 1231b5a..3f32b37 100644
--- a/arch/mips/generic/init.c
+++ b/arch/mips/generic/init.c
@@ -122,6 +122,33 @@
err = register_up_smp_ops();
}
+int __init apply_mips_fdt_fixups(void *fdt_out, size_t fdt_out_size,
+ const void *fdt_in,
+ const struct mips_fdt_fixup *fixups)
+{
+ int err;
+
+ err = fdt_open_into(fdt_in, fdt_out, fdt_out_size);
+ if (err) {
+ pr_err("Failed to open FDT\n");
+ return err;
+ }
+
+ for (; fixups->apply; fixups++) {
+ err = fixups->apply(fdt_out);
+ if (err) {
+ pr_err("Failed to apply FDT fixup \"%s\"\n",
+ fixups->description);
+ return err;
+ }
+ }
+
+ err = fdt_pack(fdt_out);
+ if (err)
+ pr_err("Failed to pack FDT\n");
+ return err;
+}
+
void __init plat_time_init(void)
{
struct device_node *np;
diff --git a/arch/mips/generic/vmlinux.its.S b/arch/mips/generic/vmlinux.its.S
index f67fbf1..3390e2f 100644
--- a/arch/mips/generic/vmlinux.its.S
+++ b/arch/mips/generic/vmlinux.its.S
@@ -29,3 +29,28 @@
};
};
};
+
+#ifdef CONFIG_FIT_IMAGE_FDT_BOSTON
+/ {
+ images {
+ fdt@boston {
+ description = "img,boston Device Tree";
+ data = /incbin/("boot/dts/img/boston.dtb");
+ type = "flat_dt";
+ arch = "mips";
+ compression = "none";
+ hash@0 {
+ algo = "sha1";
+ };
+ };
+ };
+
+ configurations {
+ conf@boston {
+ description = "Boston Linux kernel";
+ kernel = "kernel@0";
+ fdt = "fdt@boston";
+ };
+ };
+};
+#endif /* CONFIG_FIT_IMAGE_FDT_BOSTON */
diff --git a/arch/mips/generic/yamon-dt.c b/arch/mips/generic/yamon-dt.c
new file mode 100644
index 0000000..6077bca
--- /dev/null
+++ b/arch/mips/generic/yamon-dt.c
@@ -0,0 +1,240 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#define pr_fmt(fmt) "yamon-dt: " fmt
+
+#include <linux/bug.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/libfdt.h>
+#include <linux/printk.h>
+
+#include <asm/fw/fw.h>
+#include <asm/yamon-dt.h>
+
+#define MAX_MEM_ARRAY_ENTRIES 2
+
+__init int yamon_dt_append_cmdline(void *fdt)
+{
+ int err, chosen_off;
+
+ /* find or add chosen node */
+ chosen_off = fdt_path_offset(fdt, "/chosen");
+ if (chosen_off == -FDT_ERR_NOTFOUND)
+ chosen_off = fdt_path_offset(fdt, "/chosen@0");
+ if (chosen_off == -FDT_ERR_NOTFOUND)
+ chosen_off = fdt_add_subnode(fdt, 0, "chosen");
+ if (chosen_off < 0) {
+ pr_err("Unable to find or add DT chosen node: %d\n",
+ chosen_off);
+ return chosen_off;
+ }
+
+ err = fdt_setprop_string(fdt, chosen_off, "bootargs", fw_getcmdline());
+ if (err) {
+ pr_err("Unable to set bootargs property: %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static unsigned int __init gen_fdt_mem_array(
+ const struct yamon_mem_region *regions,
+ __be32 *mem_array,
+ unsigned int max_entries,
+ unsigned long memsize)
+{
+ const struct yamon_mem_region *mr;
+ unsigned long size;
+ unsigned int entries = 0;
+
+ for (mr = regions; mr->size && memsize; ++mr) {
+ if (entries >= max_entries) {
+ pr_warn("Number of regions exceeds max %u\n",
+ max_entries);
+ break;
+ }
+
+ /* How much of the remaining RAM fits in the next region? */
+ size = min_t(unsigned long, memsize, mr->size);
+ memsize -= size;
+
+ /* Emit a memory region */
+ *(mem_array++) = cpu_to_be32(mr->start);
+ *(mem_array++) = cpu_to_be32(size);
+ ++entries;
+
+ /* Discard the next mr->discard bytes */
+ memsize -= min_t(unsigned long, memsize, mr->discard);
+ }
+ return entries;
+}
+
+__init int yamon_dt_append_memory(void *fdt,
+ const struct yamon_mem_region *regions)
+{
+ unsigned long phys_memsize, memsize;
+ __be32 mem_array[2 * MAX_MEM_ARRAY_ENTRIES];
+ unsigned int mem_entries;
+ int i, err, mem_off;
+ char *var, param_name[10], *var_names[] = {
+ "ememsize", "memsize",
+ };
+
+ /* find memory size from the bootloader environment */
+ for (i = 0; i < ARRAY_SIZE(var_names); i++) {
+ var = fw_getenv(var_names[i]);
+ if (!var)
+ continue;
+
+ err = kstrtoul(var, 0, &phys_memsize);
+ if (!err)
+ break;
+
+ pr_warn("Failed to read the '%s' env variable '%s'\n",
+ var_names[i], var);
+ }
+
+ if (!phys_memsize) {
+ pr_warn("The bootloader didn't provide memsize: defaulting to 32MB\n");
+ phys_memsize = 32 << 20;
+ }
+
+ /* default to using all available RAM */
+ memsize = phys_memsize;
+
+ /* allow the user to override the usable memory */
+ for (i = 0; i < ARRAY_SIZE(var_names); i++) {
+ snprintf(param_name, sizeof(param_name), "%s=", var_names[i]);
+ var = strstr(arcs_cmdline, param_name);
+ if (!var)
+ continue;
+
+ memsize = memparse(var + strlen(param_name), NULL);
+ }
+
+ /* if the user says there's more RAM than we thought, believe them */
+ phys_memsize = max_t(unsigned long, phys_memsize, memsize);
+
+ /* find or add a memory node */
+ mem_off = fdt_path_offset(fdt, "/memory");
+ if (mem_off == -FDT_ERR_NOTFOUND)
+ mem_off = fdt_add_subnode(fdt, 0, "memory");
+ if (mem_off < 0) {
+ pr_err("Unable to find or add memory DT node: %d\n", mem_off);
+ return mem_off;
+ }
+
+ err = fdt_setprop_string(fdt, mem_off, "device_type", "memory");
+ if (err) {
+ pr_err("Unable to set memory node device_type: %d\n", err);
+ return err;
+ }
+
+ mem_entries = gen_fdt_mem_array(regions, mem_array,
+ MAX_MEM_ARRAY_ENTRIES, phys_memsize);
+ err = fdt_setprop(fdt, mem_off, "reg",
+ mem_array, mem_entries * 2 * sizeof(mem_array[0]));
+ if (err) {
+ pr_err("Unable to set memory regs property: %d\n", err);
+ return err;
+ }
+
+ mem_entries = gen_fdt_mem_array(regions, mem_array,
+ MAX_MEM_ARRAY_ENTRIES, memsize);
+ err = fdt_setprop(fdt, mem_off, "linux,usable-memory",
+ mem_array, mem_entries * 2 * sizeof(mem_array[0]));
+ if (err) {
+ pr_err("Unable to set linux,usable-memory property: %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+__init int yamon_dt_serial_config(void *fdt)
+{
+ const char *yamontty, *mode_var;
+ char mode_var_name[9], path[20], parity;
+ unsigned int uart, baud, stop_bits;
+ bool hw_flow;
+ int chosen_off, err;
+
+ yamontty = fw_getenv("yamontty");
+ if (!yamontty || !strcmp(yamontty, "tty0")) {
+ uart = 0;
+ } else if (!strcmp(yamontty, "tty1")) {
+ uart = 1;
+ } else {
+ pr_warn("yamontty environment variable '%s' invalid\n",
+ yamontty);
+ uart = 0;
+ }
+
+ baud = stop_bits = 0;
+ parity = 0;
+ hw_flow = false;
+
+ snprintf(mode_var_name, sizeof(mode_var_name), "modetty%u", uart);
+ mode_var = fw_getenv(mode_var_name);
+ if (mode_var) {
+ while (mode_var[0] >= '0' && mode_var[0] <= '9') {
+ baud *= 10;
+ baud += mode_var[0] - '0';
+ mode_var++;
+ }
+ if (mode_var[0] == ',')
+ mode_var++;
+ if (mode_var[0])
+ parity = mode_var[0];
+ if (mode_var[0] == ',')
+ mode_var++;
+ if (mode_var[0])
+ stop_bits = mode_var[0] - '0';
+ if (mode_var[0] == ',')
+ mode_var++;
+ if (!strcmp(mode_var, "hw"))
+ hw_flow = true;
+ }
+
+ if (!baud)
+ baud = 38400;
+
+ if (parity != 'e' && parity != 'n' && parity != 'o')
+ parity = 'n';
+
+ if (stop_bits != 7 && stop_bits != 8)
+ stop_bits = 8;
+
+ WARN_ON(snprintf(path, sizeof(path), "serial%u:%u%c%u%s",
+ uart, baud, parity, stop_bits,
+ hw_flow ? "r" : "") >= sizeof(path));
+
+ /* find or add chosen node */
+ chosen_off = fdt_path_offset(fdt, "/chosen");
+ if (chosen_off == -FDT_ERR_NOTFOUND)
+ chosen_off = fdt_path_offset(fdt, "/chosen@0");
+ if (chosen_off == -FDT_ERR_NOTFOUND)
+ chosen_off = fdt_add_subnode(fdt, 0, "chosen");
+ if (chosen_off < 0) {
+ pr_err("Unable to find or add DT chosen node: %d\n",
+ chosen_off);
+ return chosen_off;
+ }
+
+ err = fdt_setprop_string(fdt, chosen_off, "stdout-path", path);
+ if (err) {
+ pr_err("Unable to set stdout-path property: %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
diff --git a/arch/mips/include/asm/Kbuild b/arch/mips/include/asm/Kbuild
index 2535c7b..7c8aab2 100644
--- a/arch/mips/include/asm/Kbuild
+++ b/arch/mips/include/asm/Kbuild
@@ -12,6 +12,8 @@
generic-y += parport.h
generic-y += percpu.h
generic-y += preempt.h
+generic-y += qrwlock.h
+generic-y += qspinlock.h
generic-y += sections.h
generic-y += segment.h
generic-y += serial.h
diff --git a/arch/mips/include/asm/branch.h b/arch/mips/include/asm/branch.h
index de781cf..da80878 100644
--- a/arch/mips/include/asm/branch.h
+++ b/arch/mips/include/asm/branch.h
@@ -74,10 +74,7 @@
return __microMIPS_compute_return_epc(regs);
if (cpu_has_mips16)
return __MIPS16e_compute_return_epc(regs);
- return regs->cp0_epc;
- }
-
- if (!delay_slot(regs)) {
+ } else if (!delay_slot(regs)) {
regs->cp0_epc += 4;
return 0;
}
diff --git a/arch/mips/include/asm/cmpxchg.h b/arch/mips/include/asm/cmpxchg.h
index b71ab4a..903f3bf 100644
--- a/arch/mips/include/asm/cmpxchg.h
+++ b/arch/mips/include/asm/cmpxchg.h
@@ -13,153 +13,107 @@
#include <asm/compiler.h>
#include <asm/war.h>
-static inline unsigned long __xchg_u32(volatile int * m, unsigned int val)
-{
- __u32 retval;
-
- smp_mb__before_llsc();
-
- if (kernel_uses_llsc && R10000_LLSC_WAR) {
- unsigned long dummy;
-
- __asm__ __volatile__(
- " .set arch=r4000 \n"
- "1: ll %0, %3 # xchg_u32 \n"
- " .set mips0 \n"
- " move %2, %z4 \n"
- " .set arch=r4000 \n"
- " sc %2, %1 \n"
- " beqzl %2, 1b \n"
- " .set mips0 \n"
- : "=&r" (retval), "=" GCC_OFF_SMALL_ASM() (*m), "=&r" (dummy)
- : GCC_OFF_SMALL_ASM() (*m), "Jr" (val)
- : "memory");
- } else if (kernel_uses_llsc) {
- unsigned long dummy;
-
- do {
- __asm__ __volatile__(
- " .set "MIPS_ISA_ARCH_LEVEL" \n"
- " ll %0, %3 # xchg_u32 \n"
- " .set mips0 \n"
- " move %2, %z4 \n"
- " .set "MIPS_ISA_ARCH_LEVEL" \n"
- " sc %2, %1 \n"
- " .set mips0 \n"
- : "=&r" (retval), "=" GCC_OFF_SMALL_ASM() (*m),
- "=&r" (dummy)
- : GCC_OFF_SMALL_ASM() (*m), "Jr" (val)
- : "memory");
- } while (unlikely(!dummy));
- } else {
- unsigned long flags;
-
- raw_local_irq_save(flags);
- retval = *m;
- *m = val;
- raw_local_irq_restore(flags); /* implies memory barrier */
- }
-
- smp_llsc_mb();
-
- return retval;
-}
-
-#ifdef CONFIG_64BIT
-static inline __u64 __xchg_u64(volatile __u64 * m, __u64 val)
-{
- __u64 retval;
-
- smp_mb__before_llsc();
-
- if (kernel_uses_llsc && R10000_LLSC_WAR) {
- unsigned long dummy;
-
- __asm__ __volatile__(
- " .set arch=r4000 \n"
- "1: lld %0, %3 # xchg_u64 \n"
- " move %2, %z4 \n"
- " scd %2, %1 \n"
- " beqzl %2, 1b \n"
- " .set mips0 \n"
- : "=&r" (retval), "=" GCC_OFF_SMALL_ASM() (*m), "=&r" (dummy)
- : GCC_OFF_SMALL_ASM() (*m), "Jr" (val)
- : "memory");
- } else if (kernel_uses_llsc) {
- unsigned long dummy;
-
- do {
- __asm__ __volatile__(
- " .set "MIPS_ISA_ARCH_LEVEL" \n"
- " lld %0, %3 # xchg_u64 \n"
- " move %2, %z4 \n"
- " scd %2, %1 \n"
- " .set mips0 \n"
- : "=&r" (retval), "=" GCC_OFF_SMALL_ASM() (*m),
- "=&r" (dummy)
- : GCC_OFF_SMALL_ASM() (*m), "Jr" (val)
- : "memory");
- } while (unlikely(!dummy));
- } else {
- unsigned long flags;
-
- raw_local_irq_save(flags);
- retval = *m;
- *m = val;
- raw_local_irq_restore(flags); /* implies memory barrier */
- }
-
- smp_llsc_mb();
-
- return retval;
-}
+/*
+ * Using a branch-likely instruction to check the result of an sc instruction
+ * works around a bug present in R10000 CPUs prior to revision 3.0 that could
+ * cause ll-sc sequences to execute non-atomically.
+ */
+#if R10000_LLSC_WAR
+# define __scbeqz "beqzl"
#else
-extern __u64 __xchg_u64_unsupported_on_32bit_kernels(volatile __u64 * m, __u64 val);
-#define __xchg_u64 __xchg_u64_unsupported_on_32bit_kernels
+# define __scbeqz "beqz"
#endif
-static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+/*
+ * These functions doesn't exist, so if they are called you'll either:
+ *
+ * - Get an error at compile-time due to __compiletime_error, if supported by
+ * your compiler.
+ *
+ * or:
+ *
+ * - Get an error at link-time due to the call to the missing function.
+ */
+extern unsigned long __cmpxchg_called_with_bad_pointer(void)
+ __compiletime_error("Bad argument size for cmpxchg");
+extern unsigned long __xchg_called_with_bad_pointer(void)
+ __compiletime_error("Bad argument size for xchg");
+
+#define __xchg_asm(ld, st, m, val) \
+({ \
+ __typeof(*(m)) __ret; \
+ \
+ if (kernel_uses_llsc) { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " .set " MIPS_ISA_ARCH_LEVEL " \n" \
+ "1: " ld " %0, %2 # __xchg_asm \n" \
+ " .set mips0 \n" \
+ " move $1, %z3 \n" \
+ " .set " MIPS_ISA_ARCH_LEVEL " \n" \
+ " " st " $1, %1 \n" \
+ "\t" __scbeqz " $1, 1b \n" \
+ " .set pop \n" \
+ : "=&r" (__ret), "=" GCC_OFF_SMALL_ASM() (*m) \
+ : GCC_OFF_SMALL_ASM() (*m), "Jr" (val) \
+ : "memory"); \
+ } else { \
+ unsigned long __flags; \
+ \
+ raw_local_irq_save(__flags); \
+ __ret = *m; \
+ *m = val; \
+ raw_local_irq_restore(__flags); \
+ } \
+ \
+ __ret; \
+})
+
+extern unsigned long __xchg_small(volatile void *ptr, unsigned long val,
+ unsigned int size);
+
+static inline unsigned long __xchg(volatile void *ptr, unsigned long x,
+ int size)
{
switch (size) {
- case 4:
- return __xchg_u32(ptr, x);
- case 8:
- return __xchg_u64(ptr, x);
- }
+ case 1:
+ case 2:
+ return __xchg_small(ptr, x, size);
- return x;
+ case 4:
+ return __xchg_asm("ll", "sc", (volatile u32 *)ptr, x);
+
+ case 8:
+ if (!IS_ENABLED(CONFIG_64BIT))
+ return __xchg_called_with_bad_pointer();
+
+ return __xchg_asm("lld", "scd", (volatile u64 *)ptr, x);
+
+ default:
+ return __xchg_called_with_bad_pointer();
+ }
}
#define xchg(ptr, x) \
({ \
- BUILD_BUG_ON(sizeof(*(ptr)) & ~0xc); \
+ __typeof__(*(ptr)) __res; \
\
- ((__typeof__(*(ptr))) \
- __xchg((unsigned long)(x), (ptr), sizeof(*(ptr)))); \
+ smp_mb__before_llsc(); \
+ \
+ __res = (__typeof__(*(ptr))) \
+ __xchg((ptr), (unsigned long)(x), sizeof(*(ptr))); \
+ \
+ smp_llsc_mb(); \
+ \
+ __res; \
})
#define __cmpxchg_asm(ld, st, m, old, new) \
({ \
__typeof(*(m)) __ret; \
\
- if (kernel_uses_llsc && R10000_LLSC_WAR) { \
- __asm__ __volatile__( \
- " .set push \n" \
- " .set noat \n" \
- " .set arch=r4000 \n" \
- "1: " ld " %0, %2 # __cmpxchg_asm \n" \
- " bne %0, %z3, 2f \n" \
- " .set mips0 \n" \
- " move $1, %z4 \n" \
- " .set arch=r4000 \n" \
- " " st " $1, %1 \n" \
- " beqzl $1, 1b \n" \
- "2: \n" \
- " .set pop \n" \
- : "=&r" (__ret), "=" GCC_OFF_SMALL_ASM() (*m) \
- : GCC_OFF_SMALL_ASM() (*m), "Jr" (old), "Jr" (new) \
- : "memory"); \
- } else if (kernel_uses_llsc) { \
+ if (kernel_uses_llsc) { \
__asm__ __volatile__( \
" .set push \n" \
" .set noat \n" \
@@ -170,7 +124,7 @@
" move $1, %z4 \n" \
" .set "MIPS_ISA_ARCH_LEVEL" \n" \
" " st " $1, %1 \n" \
- " beqz $1, 1b \n" \
+ "\t" __scbeqz " $1, 1b \n" \
" .set pop \n" \
"2: \n" \
: "=&r" (__ret), "=" GCC_OFF_SMALL_ASM() (*m) \
@@ -189,44 +143,50 @@
__ret; \
})
-/*
- * This function doesn't exist, so you'll get a linker error
- * if something tries to do an invalid cmpxchg().
- */
-extern void __cmpxchg_called_with_bad_pointer(void);
+extern unsigned long __cmpxchg_small(volatile void *ptr, unsigned long old,
+ unsigned long new, unsigned int size);
-#define __cmpxchg(ptr, old, new, pre_barrier, post_barrier) \
+static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
+ unsigned long new, unsigned int size)
+{
+ switch (size) {
+ case 1:
+ case 2:
+ return __cmpxchg_small(ptr, old, new, size);
+
+ case 4:
+ return __cmpxchg_asm("ll", "sc", (volatile u32 *)ptr, old, new);
+
+ case 8:
+ /* lld/scd are only available for MIPS64 */
+ if (!IS_ENABLED(CONFIG_64BIT))
+ return __cmpxchg_called_with_bad_pointer();
+
+ return __cmpxchg_asm("lld", "scd", (volatile u64 *)ptr, old, new);
+
+ default:
+ return __cmpxchg_called_with_bad_pointer();
+ }
+}
+
+#define cmpxchg_local(ptr, old, new) \
+ ((__typeof__(*(ptr))) \
+ __cmpxchg((ptr), \
+ (unsigned long)(__typeof__(*(ptr)))(old), \
+ (unsigned long)(__typeof__(*(ptr)))(new), \
+ sizeof(*(ptr))))
+
+#define cmpxchg(ptr, old, new) \
({ \
- __typeof__(ptr) __ptr = (ptr); \
- __typeof__(*(ptr)) __old = (old); \
- __typeof__(*(ptr)) __new = (new); \
- __typeof__(*(ptr)) __res = 0; \
+ __typeof__(*(ptr)) __res; \
\
- pre_barrier; \
- \
- switch (sizeof(*(__ptr))) { \
- case 4: \
- __res = __cmpxchg_asm("ll", "sc", __ptr, __old, __new); \
- break; \
- case 8: \
- if (sizeof(long) == 8) { \
- __res = __cmpxchg_asm("lld", "scd", __ptr, \
- __old, __new); \
- break; \
- } \
- default: \
- __cmpxchg_called_with_bad_pointer(); \
- break; \
- } \
- \
- post_barrier; \
+ smp_mb__before_llsc(); \
+ __res = cmpxchg_local((ptr), (old), (new)); \
+ smp_llsc_mb(); \
\
__res; \
})
-#define cmpxchg(ptr, old, new) __cmpxchg(ptr, old, new, smp_mb__before_llsc(), smp_llsc_mb())
-#define cmpxchg_local(ptr, old, new) __cmpxchg(ptr, old, new, , )
-
#ifdef CONFIG_64BIT
#define cmpxchg64_local(ptr, o, n) \
({ \
@@ -245,4 +205,6 @@
#define cmpxchg64(ptr, o, n) cmpxchg64_local((ptr), (o), (n))
#endif
+#undef __scbeqz
+
#endif /* __ASM_CMPXCHG_H */
diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
index 494d382..8baa903 100644
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -138,6 +138,9 @@
#ifndef cpu_has_mips16
#define cpu_has_mips16 (cpu_data[0].ases & MIPS_ASE_MIPS16)
#endif
+#ifndef cpu_has_mips16e2
+#define cpu_has_mips16e2 (cpu_data[0].ases & MIPS_ASE_MIPS16E2)
+#endif
#ifndef cpu_has_mdmx
#define cpu_has_mdmx (cpu_data[0].ases & MIPS_ASE_MDMX)
#endif
@@ -487,6 +490,47 @@
# define cpu_has_perf (cpu_data[0].options & MIPS_CPU_PERF)
#endif
+#if defined(CONFIG_SMP) && defined(__mips_isa_rev) && (__mips_isa_rev >= 6)
+/*
+ * Some systems share FTLB RAMs between threads within a core (siblings in
+ * kernel parlance). This means that FTLB entries may become invalid at almost
+ * any point when an entry is evicted due to a sibling thread writing an entry
+ * to the shared FTLB RAM.
+ *
+ * This is only relevant to SMP systems, and the only systems that exhibit this
+ * property implement MIPSr6 or higher so we constrain support for this to
+ * kernels that will run on such systems.
+ */
+# ifndef cpu_has_shared_ftlb_ram
+# define cpu_has_shared_ftlb_ram \
+ (current_cpu_data.options & MIPS_CPU_SHARED_FTLB_RAM)
+# endif
+
+/*
+ * Some systems take this a step further & share FTLB entries between siblings.
+ * This is implemented as TLB writes happening as usual, but if an entry
+ * written by a sibling exists in the shared FTLB for a translation which would
+ * otherwise cause a TLB refill exception then the CPU will use the entry
+ * written by its sibling rather than triggering a refill & writing a matching
+ * TLB entry for itself.
+ *
+ * This is naturally only valid if a TLB entry is known to be suitable for use
+ * on all siblings in a CPU, and so it only takes effect when MMIDs are in use
+ * rather than ASIDs or when a TLB entry is marked global.
+ */
+# ifndef cpu_has_shared_ftlb_entries
+# define cpu_has_shared_ftlb_entries \
+ (current_cpu_data.options & MIPS_CPU_SHARED_FTLB_ENTRIES)
+# endif
+#endif /* SMP && __mips_isa_rev >= 6 */
+
+#ifndef cpu_has_shared_ftlb_ram
+# define cpu_has_shared_ftlb_ram 0
+#endif
+#ifndef cpu_has_shared_ftlb_entries
+# define cpu_has_shared_ftlb_entries 0
+#endif
+
/*
* Guest capabilities
*/
diff --git a/arch/mips/include/asm/cpu-type.h b/arch/mips/include/asm/cpu-type.h
index bdd6dc1..175fe56 100644
--- a/arch/mips/include/asm/cpu-type.h
+++ b/arch/mips/include/asm/cpu-type.h
@@ -84,6 +84,7 @@
#ifdef CONFIG_SYS_HAS_CPU_MIPS64_R6
case CPU_I6400:
+ case CPU_I6500:
case CPU_P6600:
#endif
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index 98f5930..d0c152b 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -124,6 +124,7 @@
#define PRID_IMP_P5600 0xa800
#define PRID_IMP_I6400 0xa900
#define PRID_IMP_M6250 0xab00
+#define PRID_IMP_I6500 0xb000
/*
* These are the PRID's for when 23:16 == PRID_COMP_SIBYTE
@@ -247,6 +248,7 @@
#define PRID_REV_LOONGSON3B_R1 0x0006
#define PRID_REV_LOONGSON3B_R2 0x0007
#define PRID_REV_LOONGSON3A_R2 0x0008
+#define PRID_REV_LOONGSON3A_R3 0x0009
/*
* Older processors used to encode processor version and revision in two
@@ -322,7 +324,7 @@
*/
CPU_5KC, CPU_5KE, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2,
CPU_LOONGSON3, CPU_CAVIUM_OCTEON, CPU_CAVIUM_OCTEON_PLUS,
- CPU_CAVIUM_OCTEON2, CPU_CAVIUM_OCTEON3, CPU_XLR, CPU_XLP,
+ CPU_CAVIUM_OCTEON2, CPU_CAVIUM_OCTEON3, CPU_XLR, CPU_XLP, CPU_I6500,
CPU_QEMU_GENERIC,
@@ -416,6 +418,10 @@
#define MIPS_CPU_GUESTID MBIT_ULL(51) /* CPU uses VZ ASE GuestID feature */
#define MIPS_CPU_DRG MBIT_ULL(52) /* CPU has VZ Direct Root to Guest (DRG) */
#define MIPS_CPU_UFR MBIT_ULL(53) /* CPU supports User mode FR switching */
+#define MIPS_CPU_SHARED_FTLB_RAM \
+ MBIT_ULL(54) /* CPU shares FTLB RAM with another */
+#define MIPS_CPU_SHARED_FTLB_ENTRIES \
+ MBIT_ULL(55) /* CPU shares FTLB entries with another */
/*
* CPU ASE encodings
@@ -430,5 +436,6 @@
#define MIPS_ASE_VZ 0x00000080 /* Virtualization ASE */
#define MIPS_ASE_MSA 0x00000100 /* MIPS SIMD Architecture */
#define MIPS_ASE_DSP3 0x00000200 /* Signal Processing ASE Rev 3*/
+#define MIPS_ASE_MIPS16E2 0x00000400 /* MIPS16e2 */
#endif /* _ASM_CPU_H */
diff --git a/arch/mips/include/asm/irq.h b/arch/mips/include/asm/irq.h
index ddd1c91..c5d3517 100644
--- a/arch/mips/include/asm/irq.h
+++ b/arch/mips/include/asm/irq.h
@@ -18,7 +18,7 @@
#include <irq.h>
#define IRQ_STACK_SIZE THREAD_SIZE
-#define IRQ_STACK_START (IRQ_STACK_SIZE - sizeof(unsigned long))
+#define IRQ_STACK_START (IRQ_STACK_SIZE - 16)
extern void *irq_stack[NR_CPUS];
diff --git a/arch/mips/include/asm/mach-ath25/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ath25/cpu-feature-overrides.h
index ade0356..e6a8108 100644
--- a/arch/mips/include/asm/mach-ath25/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-ath25/cpu-feature-overrides.h
@@ -40,6 +40,7 @@
#endif
#define cpu_has_mips16 0
+#define cpu_has_mips16e2 0
#define cpu_has_mdmx 0
#define cpu_has_mips3d 0
#define cpu_has_smartmips 0
diff --git a/arch/mips/include/asm/mach-au1x00/cpu-feature-overrides.h b/arch/mips/include/asm/mach-au1x00/cpu-feature-overrides.h
index c5b6eef..bace5b9 100644
--- a/arch/mips/include/asm/mach-au1x00/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-au1x00/cpu-feature-overrides.h
@@ -31,6 +31,7 @@
#define cpu_has_ejtag 1
#define cpu_has_llsc 1
#define cpu_has_mips16 0
+#define cpu_has_mips16e2 0
#define cpu_has_mdmx 0
#define cpu_has_mips3d 0
#define cpu_has_smartmips 0
diff --git a/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h b/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h
index bc1167d..b56cf10 100644
--- a/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h
@@ -19,6 +19,7 @@
#define cpu_has_ejtag 1
#define cpu_has_llsc 1
#define cpu_has_mips16 0
+#define cpu_has_mips16e2 0
#define cpu_has_mdmx 0
#define cpu_has_mips3d 0
#define cpu_has_smartmips 0
diff --git a/arch/mips/include/asm/mach-cobalt/cpu-feature-overrides.h b/arch/mips/include/asm/mach-cobalt/cpu-feature-overrides.h
index 30c5cd9..291fe90 100644
--- a/arch/mips/include/asm/mach-cobalt/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-cobalt/cpu-feature-overrides.h
@@ -37,6 +37,7 @@
#endif
#define cpu_has_mips16 0
+#define cpu_has_mips16e2 0
#define cpu_has_mdmx 0
#define cpu_has_mips3d 0
#define cpu_has_smartmips 0
diff --git a/arch/mips/include/asm/mach-dec/cpu-feature-overrides.h b/arch/mips/include/asm/mach-dec/cpu-feature-overrides.h
index 21eae03..2ec1023 100644
--- a/arch/mips/include/asm/mach-dec/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-dec/cpu-feature-overrides.h
@@ -27,6 +27,7 @@
#define cpu_has_mcheck 0
#define cpu_has_ejtag 0
#define cpu_has_mips16 0
+#define cpu_has_mips16e2 0
#define cpu_has_mdmx 0
#define cpu_has_mips3d 0
#define cpu_has_smartmips 0
diff --git a/arch/mips/include/asm/mach-generic/mc146818rtc.h b/arch/mips/include/asm/mach-generic/mc146818rtc.h
index 0b9a942..9c72e54 100644
--- a/arch/mips/include/asm/mach-generic/mc146818rtc.h
+++ b/arch/mips/include/asm/mach-generic/mc146818rtc.h
@@ -27,7 +27,7 @@
outb_p(data, RTC_PORT(1));
}
-#define RTC_ALWAYS_BCD 1
+#define RTC_ALWAYS_BCD 0
#ifndef mc146818_decode_year
#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1900)
diff --git a/arch/mips/include/asm/mach-ip22/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ip22/cpu-feature-overrides.h
index 9b19b72..b80d5ea 100644
--- a/arch/mips/include/asm/mach-ip22/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-ip22/cpu-feature-overrides.h
@@ -19,6 +19,7 @@
#define cpu_has_32fpr 1
#define cpu_has_counter 1
#define cpu_has_mips16 0
+#define cpu_has_mips16e2 0
#define cpu_has_divec 0
#define cpu_has_cache_cdex_p 1
#define cpu_has_prefetch 0
diff --git a/arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h
index 7449794..136d6d4 100644
--- a/arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h
@@ -43,6 +43,7 @@
#define cpu_has_ejtag 0
#define cpu_has_llsc 1
#define cpu_has_mips16 0
+#define cpu_has_mips16e2 0
#define cpu_has_mdmx 0
#define cpu_has_mips3d 0
#define cpu_has_smartmips 0
diff --git a/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h
index 4cec06d..ba8b4e3 100644
--- a/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h
@@ -16,6 +16,7 @@
*/
#define cpu_has_watch 1
#define cpu_has_mips16 0
+#define cpu_has_mips16e2 0
#define cpu_has_divec 0
#define cpu_has_vce 0
#define cpu_has_cache_cdex_p 0
diff --git a/arch/mips/include/asm/mach-ip32/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ip32/cpu-feature-overrides.h
index 241409b..63b4c88 100644
--- a/arch/mips/include/asm/mach-ip32/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-ip32/cpu-feature-overrides.h
@@ -29,6 +29,7 @@
#define cpu_has_32fpr 1
#define cpu_has_counter 1
#define cpu_has_mips16 0
+#define cpu_has_mips16e2 0
#define cpu_has_vce 0
#define cpu_has_cache_cdex_s 0
#define cpu_has_mcheck 0
diff --git a/arch/mips/include/asm/mach-jz4740/cpu-feature-overrides.h b/arch/mips/include/asm/mach-jz4740/cpu-feature-overrides.h
index 0933f94..7c5e576 100644
--- a/arch/mips/include/asm/mach-jz4740/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-jz4740/cpu-feature-overrides.h
@@ -23,6 +23,7 @@
#define cpu_has_ejtag 1
#define cpu_has_llsc 1
#define cpu_has_mips16 0
+#define cpu_has_mips16e2 0
#define cpu_has_mdmx 0
#define cpu_has_mips3d 0
#define cpu_has_smartmips 0
diff --git a/arch/mips/include/asm/mach-loongson64/boot_param.h b/arch/mips/include/asm/mach-loongson64/boot_param.h
index d3f3258..9f9bb9c 100644
--- a/arch/mips/include/asm/mach-loongson64/boot_param.h
+++ b/arch/mips/include/asm/mach-loongson64/boot_param.h
@@ -27,12 +27,22 @@
} __packed;
enum loongson_cpu_type {
- Loongson_2E = 0,
- Loongson_2F = 1,
- Loongson_3A = 2,
- Loongson_3B = 3,
- Loongson_1A = 4,
- Loongson_1B = 5
+ Legacy_2E = 0x0,
+ Legacy_2F = 0x1,
+ Legacy_3A = 0x2,
+ Legacy_3B = 0x3,
+ Legacy_1A = 0x4,
+ Legacy_1B = 0x5,
+ Legacy_2G = 0x6,
+ Legacy_2H = 0x7,
+ Loongson_1A = 0x100,
+ Loongson_1B = 0x101,
+ Loongson_2E = 0x200,
+ Loongson_2F = 0x201,
+ Loongson_2G = 0x202,
+ Loongson_2H = 0x203,
+ Loongson_3A = 0x300,
+ Loongson_3B = 0x301
};
/*
diff --git a/arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h b/arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h
index 89328a3d..581915c 100644
--- a/arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h
@@ -32,6 +32,7 @@
#define cpu_has_mcheck 0
#define cpu_has_mdmx 0
#define cpu_has_mips16 0
+#define cpu_has_mips16e2 0
#define cpu_has_mips3d 0
#define cpu_has_mipsmt 0
#define cpu_has_smartmips 0
diff --git a/arch/mips/include/asm/mach-netlogic/cpu-feature-overrides.h b/arch/mips/include/asm/mach-netlogic/cpu-feature-overrides.h
index 091deb17..0c29ff8 100644
--- a/arch/mips/include/asm/mach-netlogic/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-netlogic/cpu-feature-overrides.h
@@ -13,6 +13,7 @@
#define cpu_has_4k_cache 1
#define cpu_has_watch 1
#define cpu_has_mips16 0
+#define cpu_has_mips16e2 0
#define cpu_has_counter 1
#define cpu_has_divec 1
#define cpu_has_vce 0
diff --git a/arch/mips/include/asm/mach-ralink/ralink_regs.h b/arch/mips/include/asm/mach-ralink/ralink_regs.h
index 9df1a53..b4e7dfa 100644
--- a/arch/mips/include/asm/mach-ralink/ralink_regs.h
+++ b/arch/mips/include/asm/mach-ralink/ralink_regs.h
@@ -13,6 +13,8 @@
#ifndef _RALINK_REGS_H_
#define _RALINK_REGS_H_
+#include <linux/io.h>
+
enum ralink_soc_type {
RALINK_UNKNOWN = 0,
RT2880_SOC,
diff --git a/arch/mips/include/asm/mach-rc32434/cpu-feature-overrides.h b/arch/mips/include/asm/mach-rc32434/cpu-feature-overrides.h
index b153075..6a1087e 100644
--- a/arch/mips/include/asm/mach-rc32434/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-rc32434/cpu-feature-overrides.h
@@ -48,6 +48,7 @@
#define cpu_has_llsc 1
#define cpu_has_mips16 0
+#define cpu_has_mips16e2 0
#define cpu_has_mdmx 0
#define cpu_has_mips3d 0
#define cpu_has_smartmips 0
diff --git a/arch/mips/include/asm/mach-rm/cpu-feature-overrides.h b/arch/mips/include/asm/mach-rm/cpu-feature-overrides.h
index d38be66..e1e1823 100644
--- a/arch/mips/include/asm/mach-rm/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-rm/cpu-feature-overrides.h
@@ -17,6 +17,7 @@
#define cpu_has_counter 1
#define cpu_has_watch 0
#define cpu_has_mips16 0
+#define cpu_has_mips16e2 0
#define cpu_has_divec 0
#define cpu_has_cache_cdex_p 1
#define cpu_has_prefetch 0
diff --git a/arch/mips/include/asm/mach-sibyte/cpu-feature-overrides.h b/arch/mips/include/asm/mach-sibyte/cpu-feature-overrides.h
index 92927b6..7022358 100644
--- a/arch/mips/include/asm/mach-sibyte/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-sibyte/cpu-feature-overrides.h
@@ -13,6 +13,7 @@
*/
#define cpu_has_watch 1
#define cpu_has_mips16 0
+#define cpu_has_mips16e2 0
#define cpu_has_divec 1
#define cpu_has_vce 0
#define cpu_has_cache_cdex_p 0
diff --git a/arch/mips/include/asm/mach-tx49xx/cpu-feature-overrides.h b/arch/mips/include/asm/mach-tx49xx/cpu-feature-overrides.h
index 7f5144c..b9d39dc 100644
--- a/arch/mips/include/asm/mach-tx49xx/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-tx49xx/cpu-feature-overrides.h
@@ -6,6 +6,7 @@
#define cpu_has_inclusive_pcaches 0
#define cpu_has_mips16 0
+#define cpu_has_mips16e2 0
#define cpu_has_mdmx 0
#define cpu_has_mips3d 0
#define cpu_has_smartmips 0
diff --git a/arch/mips/include/asm/machine.h b/arch/mips/include/asm/machine.h
index 6b444cd..ecb6c73 100644
--- a/arch/mips/include/asm/machine.h
+++ b/arch/mips/include/asm/machine.h
@@ -60,4 +60,35 @@
return NULL;
}
+/**
+ * struct mips_fdt_fixup - Describe a fixup to apply to an FDT
+ * @apply: applies the fixup to @fdt, returns zero on success else -errno
+ * @description: a short description of the fixup
+ *
+ * Describes a fixup applied to an FDT blob by the @apply function. The
+ * @description field provides a short description of the fixup intended for
+ * use in error messages if the @apply function returns non-zero.
+ */
+struct mips_fdt_fixup {
+ int (*apply)(void *fdt);
+ const char *description;
+};
+
+/**
+ * apply_mips_fdt_fixups() - apply fixups to an FDT blob
+ * @fdt_out: buffer in which to place the fixed-up FDT
+ * @fdt_out_size: the size of the @fdt_out buffer
+ * @fdt_in: the FDT blob
+ * @fixups: pointer to an array of fixups to be applied
+ *
+ * Loop through the array of fixups pointed to by @fixups, calling the apply
+ * function on each until either one returns an error or we reach the end of
+ * the list as indicated by an entry with a NULL apply field.
+ *
+ * Return: zero on success, else -errno
+ */
+extern int __init apply_mips_fdt_fixups(void *fdt_out, size_t fdt_out_size,
+ const void *fdt_in,
+ const struct mips_fdt_fixup *fixups);
+
#endif /* __MIPS_ASM_MACHINE_H__ */
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index 6875b69..dbb0ece 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -652,6 +652,7 @@
#define MIPS_CONF5_SBRI (_ULCAST_(1) << 6)
#define MIPS_CONF5_FRE (_ULCAST_(1) << 8)
#define MIPS_CONF5_UFE (_ULCAST_(1) << 9)
+#define MIPS_CONF5_CA2 (_ULCAST_(1) << 14)
#define MIPS_CONF5_MSAEN (_ULCAST_(1) << 27)
#define MIPS_CONF5_EVA (_ULCAST_(1) << 28)
#define MIPS_CONF5_CV (_ULCAST_(1) << 29)
diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h
index 702c273..e51add1 100644
--- a/arch/mips/include/asm/module.h
+++ b/arch/mips/include/asm/module.h
@@ -47,8 +47,8 @@
#define Elf_Mips_Rel Elf32_Rel
#define Elf_Mips_Rela Elf32_Rela
-#define ELF_MIPS_R_SYM(rel) ELF32_R_SYM(rel.r_info)
-#define ELF_MIPS_R_TYPE(rel) ELF32_R_TYPE(rel.r_info)
+#define ELF_MIPS_R_SYM(rel) ELF32_R_SYM((rel).r_info)
+#define ELF_MIPS_R_TYPE(rel) ELF32_R_TYPE((rel).r_info)
#endif
@@ -65,8 +65,8 @@
#define Elf_Mips_Rel Elf64_Mips_Rel
#define Elf_Mips_Rela Elf64_Mips_Rela
-#define ELF_MIPS_R_SYM(rel) (rel.r_sym)
-#define ELF_MIPS_R_TYPE(rel) (rel.r_type)
+#define ELF_MIPS_R_SYM(rel) ((rel).r_sym)
+#define ELF_MIPS_R_TYPE(rel) ((rel).r_type)
#endif
diff --git a/arch/mips/include/asm/pgalloc.h b/arch/mips/include/asm/pgalloc.h
index a1bdb1e..39b9f31 100644
--- a/arch/mips/include/asm/pgalloc.h
+++ b/arch/mips/include/asm/pgalloc.h
@@ -116,7 +116,7 @@
{
pud_t *pud;
- pud = (pud_t *) __get_free_pages(GFP_KERNEL|__GFP_REPEAT, PUD_ORDER);
+ pud = (pud_t *) __get_free_pages(GFP_KERNEL, PUD_ORDER);
if (pud)
pud_init((unsigned long)pud, (unsigned long)invalid_pmd_table);
return pud;
diff --git a/arch/mips/include/asm/smp.h b/arch/mips/include/asm/smp.h
index 98a117a..bab3d41 100644
--- a/arch/mips/include/asm/smp.h
+++ b/arch/mips/include/asm/smp.h
@@ -47,7 +47,7 @@
/* Mask of CPUs which are currently definitely operating coherently */
extern cpumask_t cpu_coherent_mask;
-extern void asmlinkage smp_bootstrap(void);
+extern asmlinkage void smp_bootstrap(void);
extern void calculate_cpu_foreign_map(void);
diff --git a/arch/mips/include/asm/spinlock.h b/arch/mips/include/asm/spinlock.h
index a8df44d..a7d21da 100644
--- a/arch/mips/include/asm/spinlock.h
+++ b/arch/mips/include/asm/spinlock.h
@@ -9,431 +9,9 @@
#ifndef _ASM_SPINLOCK_H
#define _ASM_SPINLOCK_H
-#include <linux/compiler.h>
-
-#include <asm/barrier.h>
#include <asm/processor.h>
-#include <asm/compiler.h>
-#include <asm/war.h>
-
-/*
- * Your basic SMP spinlocks, allowing only a single CPU anywhere
- *
- * Simple spin lock operations. There are two variants, one clears IRQ's
- * on the local processor, one does not.
- *
- * These are fair FIFO ticket locks
- *
- * (the type definitions are in asm/spinlock_types.h)
- */
-
-
-/*
- * Ticket locks are conceptually two parts, one indicating the current head of
- * the queue, and the other indicating the current tail. The lock is acquired
- * by atomically noting the tail and incrementing it by one (thus adding
- * ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
- */
-
-static inline int arch_spin_is_locked(arch_spinlock_t *lock)
-{
- u32 counters = ACCESS_ONCE(lock->lock);
-
- return ((counters >> 16) ^ counters) & 0xffff;
-}
-
-static inline int arch_spin_value_unlocked(arch_spinlock_t lock)
-{
- return lock.h.serving_now == lock.h.ticket;
-}
-
-#define arch_spin_lock_flags(lock, flags) arch_spin_lock(lock)
-
-static inline void arch_spin_unlock_wait(arch_spinlock_t *lock)
-{
- u16 owner = READ_ONCE(lock->h.serving_now);
- smp_rmb();
- for (;;) {
- arch_spinlock_t tmp = READ_ONCE(*lock);
-
- if (tmp.h.serving_now == tmp.h.ticket ||
- tmp.h.serving_now != owner)
- break;
-
- cpu_relax();
- }
- smp_acquire__after_ctrl_dep();
-}
-
-static inline int arch_spin_is_contended(arch_spinlock_t *lock)
-{
- u32 counters = ACCESS_ONCE(lock->lock);
-
- return (((counters >> 16) - counters) & 0xffff) > 1;
-}
-#define arch_spin_is_contended arch_spin_is_contended
-
-static inline void arch_spin_lock(arch_spinlock_t *lock)
-{
- int my_ticket;
- int tmp;
- int inc = 0x10000;
-
- if (R10000_LLSC_WAR) {
- __asm__ __volatile__ (
- " .set push # arch_spin_lock \n"
- " .set noreorder \n"
- " \n"
- "1: ll %[ticket], %[ticket_ptr] \n"
- " addu %[my_ticket], %[ticket], %[inc] \n"
- " sc %[my_ticket], %[ticket_ptr] \n"
- " beqzl %[my_ticket], 1b \n"
- " nop \n"
- " srl %[my_ticket], %[ticket], 16 \n"
- " andi %[ticket], %[ticket], 0xffff \n"
- " bne %[ticket], %[my_ticket], 4f \n"
- " subu %[ticket], %[my_ticket], %[ticket] \n"
- "2: \n"
- " .subsection 2 \n"
- "4: andi %[ticket], %[ticket], 0xffff \n"
- " sll %[ticket], 5 \n"
- " \n"
- "6: bnez %[ticket], 6b \n"
- " subu %[ticket], 1 \n"
- " \n"
- " lhu %[ticket], %[serving_now_ptr] \n"
- " beq %[ticket], %[my_ticket], 2b \n"
- " subu %[ticket], %[my_ticket], %[ticket] \n"
- " b 4b \n"
- " subu %[ticket], %[ticket], 1 \n"
- " .previous \n"
- " .set pop \n"
- : [ticket_ptr] "+" GCC_OFF_SMALL_ASM() (lock->lock),
- [serving_now_ptr] "+m" (lock->h.serving_now),
- [ticket] "=&r" (tmp),
- [my_ticket] "=&r" (my_ticket)
- : [inc] "r" (inc));
- } else {
- __asm__ __volatile__ (
- " .set push # arch_spin_lock \n"
- " .set noreorder \n"
- " \n"
- "1: ll %[ticket], %[ticket_ptr] \n"
- " addu %[my_ticket], %[ticket], %[inc] \n"
- " sc %[my_ticket], %[ticket_ptr] \n"
- " beqz %[my_ticket], 1b \n"
- " srl %[my_ticket], %[ticket], 16 \n"
- " andi %[ticket], %[ticket], 0xffff \n"
- " bne %[ticket], %[my_ticket], 4f \n"
- " subu %[ticket], %[my_ticket], %[ticket] \n"
- "2: .insn \n"
- " .subsection 2 \n"
- "4: andi %[ticket], %[ticket], 0xffff \n"
- " sll %[ticket], 5 \n"
- " \n"
- "6: bnez %[ticket], 6b \n"
- " subu %[ticket], 1 \n"
- " \n"
- " lhu %[ticket], %[serving_now_ptr] \n"
- " beq %[ticket], %[my_ticket], 2b \n"
- " subu %[ticket], %[my_ticket], %[ticket] \n"
- " b 4b \n"
- " subu %[ticket], %[ticket], 1 \n"
- " .previous \n"
- " .set pop \n"
- : [ticket_ptr] "+" GCC_OFF_SMALL_ASM() (lock->lock),
- [serving_now_ptr] "+m" (lock->h.serving_now),
- [ticket] "=&r" (tmp),
- [my_ticket] "=&r" (my_ticket)
- : [inc] "r" (inc));
- }
-
- smp_llsc_mb();
-}
-
-static inline void arch_spin_unlock(arch_spinlock_t *lock)
-{
- unsigned int serving_now = lock->h.serving_now + 1;
- wmb();
- lock->h.serving_now = (u16)serving_now;
- nudge_writes();
-}
-
-static inline unsigned int arch_spin_trylock(arch_spinlock_t *lock)
-{
- int tmp, tmp2, tmp3;
- int inc = 0x10000;
-
- if (R10000_LLSC_WAR) {
- __asm__ __volatile__ (
- " .set push # arch_spin_trylock \n"
- " .set noreorder \n"
- " \n"
- "1: ll %[ticket], %[ticket_ptr] \n"
- " srl %[my_ticket], %[ticket], 16 \n"
- " andi %[now_serving], %[ticket], 0xffff \n"
- " bne %[my_ticket], %[now_serving], 3f \n"
- " addu %[ticket], %[ticket], %[inc] \n"
- " sc %[ticket], %[ticket_ptr] \n"
- " beqzl %[ticket], 1b \n"
- " li %[ticket], 1 \n"
- "2: \n"
- " .subsection 2 \n"
- "3: b 2b \n"
- " li %[ticket], 0 \n"
- " .previous \n"
- " .set pop \n"
- : [ticket_ptr] "+" GCC_OFF_SMALL_ASM() (lock->lock),
- [ticket] "=&r" (tmp),
- [my_ticket] "=&r" (tmp2),
- [now_serving] "=&r" (tmp3)
- : [inc] "r" (inc));
- } else {
- __asm__ __volatile__ (
- " .set push # arch_spin_trylock \n"
- " .set noreorder \n"
- " \n"
- "1: ll %[ticket], %[ticket_ptr] \n"
- " srl %[my_ticket], %[ticket], 16 \n"
- " andi %[now_serving], %[ticket], 0xffff \n"
- " bne %[my_ticket], %[now_serving], 3f \n"
- " addu %[ticket], %[ticket], %[inc] \n"
- " sc %[ticket], %[ticket_ptr] \n"
- " beqz %[ticket], 1b \n"
- " li %[ticket], 1 \n"
- "2: .insn \n"
- " .subsection 2 \n"
- "3: b 2b \n"
- " li %[ticket], 0 \n"
- " .previous \n"
- " .set pop \n"
- : [ticket_ptr] "+" GCC_OFF_SMALL_ASM() (lock->lock),
- [ticket] "=&r" (tmp),
- [my_ticket] "=&r" (tmp2),
- [now_serving] "=&r" (tmp3)
- : [inc] "r" (inc));
- }
-
- smp_llsc_mb();
-
- return tmp;
-}
-
-/*
- * Read-write spinlocks, allowing multiple readers but only one writer.
- *
- * NOTE! it is quite common to have readers in interrupts but no interrupt
- * writers. For those circumstances we can "mix" irq-safe locks - any writer
- * needs to get a irq-safe write-lock, but readers can get non-irqsafe
- * read-locks.
- */
-
-/*
- * read_can_lock - would read_trylock() succeed?
- * @lock: the rwlock in question.
- */
-#define arch_read_can_lock(rw) ((rw)->lock >= 0)
-
-/*
- * write_can_lock - would write_trylock() succeed?
- * @lock: the rwlock in question.
- */
-#define arch_write_can_lock(rw) (!(rw)->lock)
-
-static inline void arch_read_lock(arch_rwlock_t *rw)
-{
- unsigned int tmp;
-
- if (R10000_LLSC_WAR) {
- __asm__ __volatile__(
- " .set noreorder # arch_read_lock \n"
- "1: ll %1, %2 \n"
- " bltz %1, 1b \n"
- " addu %1, 1 \n"
- " sc %1, %0 \n"
- " beqzl %1, 1b \n"
- " nop \n"
- " .set reorder \n"
- : "=" GCC_OFF_SMALL_ASM() (rw->lock), "=&r" (tmp)
- : GCC_OFF_SMALL_ASM() (rw->lock)
- : "memory");
- } else {
- do {
- __asm__ __volatile__(
- "1: ll %1, %2 # arch_read_lock \n"
- " bltz %1, 1b \n"
- " addu %1, 1 \n"
- "2: sc %1, %0 \n"
- : "=" GCC_OFF_SMALL_ASM() (rw->lock), "=&r" (tmp)
- : GCC_OFF_SMALL_ASM() (rw->lock)
- : "memory");
- } while (unlikely(!tmp));
- }
-
- smp_llsc_mb();
-}
-
-static inline void arch_read_unlock(arch_rwlock_t *rw)
-{
- unsigned int tmp;
-
- smp_mb__before_llsc();
-
- if (R10000_LLSC_WAR) {
- __asm__ __volatile__(
- "1: ll %1, %2 # arch_read_unlock \n"
- " addiu %1, -1 \n"
- " sc %1, %0 \n"
- " beqzl %1, 1b \n"
- : "=" GCC_OFF_SMALL_ASM() (rw->lock), "=&r" (tmp)
- : GCC_OFF_SMALL_ASM() (rw->lock)
- : "memory");
- } else {
- do {
- __asm__ __volatile__(
- "1: ll %1, %2 # arch_read_unlock \n"
- " addiu %1, -1 \n"
- " sc %1, %0 \n"
- : "=" GCC_OFF_SMALL_ASM() (rw->lock), "=&r" (tmp)
- : GCC_OFF_SMALL_ASM() (rw->lock)
- : "memory");
- } while (unlikely(!tmp));
- }
-}
-
-static inline void arch_write_lock(arch_rwlock_t *rw)
-{
- unsigned int tmp;
-
- if (R10000_LLSC_WAR) {
- __asm__ __volatile__(
- " .set noreorder # arch_write_lock \n"
- "1: ll %1, %2 \n"
- " bnez %1, 1b \n"
- " lui %1, 0x8000 \n"
- " sc %1, %0 \n"
- " beqzl %1, 1b \n"
- " nop \n"
- " .set reorder \n"
- : "=" GCC_OFF_SMALL_ASM() (rw->lock), "=&r" (tmp)
- : GCC_OFF_SMALL_ASM() (rw->lock)
- : "memory");
- } else {
- do {
- __asm__ __volatile__(
- "1: ll %1, %2 # arch_write_lock \n"
- " bnez %1, 1b \n"
- " lui %1, 0x8000 \n"
- "2: sc %1, %0 \n"
- : "=" GCC_OFF_SMALL_ASM() (rw->lock), "=&r" (tmp)
- : GCC_OFF_SMALL_ASM() (rw->lock)
- : "memory");
- } while (unlikely(!tmp));
- }
-
- smp_llsc_mb();
-}
-
-static inline void arch_write_unlock(arch_rwlock_t *rw)
-{
- smp_mb__before_llsc();
-
- __asm__ __volatile__(
- " # arch_write_unlock \n"
- " sw $0, %0 \n"
- : "=m" (rw->lock)
- : "m" (rw->lock)
- : "memory");
-}
-
-static inline int arch_read_trylock(arch_rwlock_t *rw)
-{
- unsigned int tmp;
- int ret;
-
- if (R10000_LLSC_WAR) {
- __asm__ __volatile__(
- " .set noreorder # arch_read_trylock \n"
- " li %2, 0 \n"
- "1: ll %1, %3 \n"
- " bltz %1, 2f \n"
- " addu %1, 1 \n"
- " sc %1, %0 \n"
- " .set reorder \n"
- " beqzl %1, 1b \n"
- " nop \n"
- __WEAK_LLSC_MB
- " li %2, 1 \n"
- "2: \n"
- : "=" GCC_OFF_SMALL_ASM() (rw->lock), "=&r" (tmp), "=&r" (ret)
- : GCC_OFF_SMALL_ASM() (rw->lock)
- : "memory");
- } else {
- __asm__ __volatile__(
- " .set noreorder # arch_read_trylock \n"
- " li %2, 0 \n"
- "1: ll %1, %3 \n"
- " bltz %1, 2f \n"
- " addu %1, 1 \n"
- " sc %1, %0 \n"
- " beqz %1, 1b \n"
- " nop \n"
- " .set reorder \n"
- __WEAK_LLSC_MB
- " li %2, 1 \n"
- "2: .insn \n"
- : "=" GCC_OFF_SMALL_ASM() (rw->lock), "=&r" (tmp), "=&r" (ret)
- : GCC_OFF_SMALL_ASM() (rw->lock)
- : "memory");
- }
-
- return ret;
-}
-
-static inline int arch_write_trylock(arch_rwlock_t *rw)
-{
- unsigned int tmp;
- int ret;
-
- if (R10000_LLSC_WAR) {
- __asm__ __volatile__(
- " .set noreorder # arch_write_trylock \n"
- " li %2, 0 \n"
- "1: ll %1, %3 \n"
- " bnez %1, 2f \n"
- " lui %1, 0x8000 \n"
- " sc %1, %0 \n"
- " beqzl %1, 1b \n"
- " nop \n"
- __WEAK_LLSC_MB
- " li %2, 1 \n"
- " .set reorder \n"
- "2: \n"
- : "=" GCC_OFF_SMALL_ASM() (rw->lock), "=&r" (tmp), "=&r" (ret)
- : GCC_OFF_SMALL_ASM() (rw->lock)
- : "memory");
- } else {
- do {
- __asm__ __volatile__(
- " ll %1, %3 # arch_write_trylock \n"
- " li %2, 0 \n"
- " bnez %1, 2f \n"
- " lui %1, 0x8000 \n"
- " sc %1, %0 \n"
- " li %2, 1 \n"
- "2: .insn \n"
- : "=" GCC_OFF_SMALL_ASM() (rw->lock), "=&r" (tmp),
- "=&r" (ret)
- : GCC_OFF_SMALL_ASM() (rw->lock)
- : "memory");
- } while (unlikely(!tmp));
-
- smp_llsc_mb();
- }
-
- return ret;
-}
+#include <asm/qrwlock.h>
+#include <asm/qspinlock.h>
#define arch_read_lock_flags(lock, flags) arch_read_lock(lock)
#define arch_write_lock_flags(lock, flags) arch_write_lock(lock)
diff --git a/arch/mips/include/asm/spinlock_types.h b/arch/mips/include/asm/spinlock_types.h
index 9b2528e..177e722 100644
--- a/arch/mips/include/asm/spinlock_types.h
+++ b/arch/mips/include/asm/spinlock_types.h
@@ -1,37 +1,7 @@
#ifndef _ASM_SPINLOCK_TYPES_H
#define _ASM_SPINLOCK_TYPES_H
-#ifndef __LINUX_SPINLOCK_TYPES_H
-# error "please don't include this file directly"
-#endif
-
-#include <linux/types.h>
-
-#include <asm/byteorder.h>
-
-typedef union {
- /*
- * bits 0..15 : serving_now
- * bits 16..31 : ticket
- */
- u32 lock;
- struct {
-#ifdef __BIG_ENDIAN
- u16 ticket;
- u16 serving_now;
-#else
- u16 serving_now;
- u16 ticket;
-#endif
- } h;
-} arch_spinlock_t;
-
-#define __ARCH_SPIN_LOCK_UNLOCKED { .lock = 0 }
-
-typedef struct {
- volatile unsigned int lock;
-} arch_rwlock_t;
-
-#define __ARCH_RW_LOCK_UNLOCKED { 0 }
+#include <asm-generic/qspinlock_types.h>
+#include <asm-generic/qrwlock_types.h>
#endif
diff --git a/arch/mips/include/asm/syscall.h b/arch/mips/include/asm/syscall.h
index d878825..7c71302 100644
--- a/arch/mips/include/asm/syscall.h
+++ b/arch/mips/include/asm/syscall.h
@@ -85,7 +85,7 @@
{
if (error) {
regs->regs[2] = -error;
- regs->regs[7] = -1;
+ regs->regs[7] = 1;
} else {
regs->regs[2] = val;
regs->regs[7] = 0;
diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h
index 9700251..b713069 100644
--- a/arch/mips/include/asm/uaccess.h
+++ b/arch/mips/include/asm/uaccess.h
@@ -497,283 +497,6 @@
extern void __put_user_unknown(void);
/*
- * ul{b,h,w} are macros and there are no equivalent macros for EVA.
- * EVA unaligned access is handled in the ADE exception handler.
- */
-#ifndef CONFIG_EVA
-/*
- * put_user_unaligned: - Write a simple value into user space.
- * @x: Value to copy to user space.
- * @ptr: Destination address, in user space.
- *
- * Context: User context only. This function may sleep if pagefaults are
- * enabled.
- *
- * This macro copies a single simple value from kernel space to user
- * space. It supports simple types like char and int, but not larger
- * data types like structures or arrays.
- *
- * @ptr must have pointer-to-simple-variable type, and @x must be assignable
- * to the result of dereferencing @ptr.
- *
- * Returns zero on success, or -EFAULT on error.
- */
-#define put_user_unaligned(x,ptr) \
- __put_user_unaligned_check((x),(ptr),sizeof(*(ptr)))
-
-/*
- * get_user_unaligned: - Get a simple variable from user space.
- * @x: Variable to store result.
- * @ptr: Source address, in user space.
- *
- * Context: User context only. This function may sleep if pagefaults are
- * enabled.
- *
- * This macro copies a single simple variable from user space to kernel
- * space. It supports simple types like char and int, but not larger
- * data types like structures or arrays.
- *
- * @ptr must have pointer-to-simple-variable type, and the result of
- * dereferencing @ptr must be assignable to @x without a cast.
- *
- * Returns zero on success, or -EFAULT on error.
- * On error, the variable @x is set to zero.
- */
-#define get_user_unaligned(x,ptr) \
- __get_user_unaligned_check((x),(ptr),sizeof(*(ptr)))
-
-/*
- * __put_user_unaligned: - Write a simple value into user space, with less checking.
- * @x: Value to copy to user space.
- * @ptr: Destination address, in user space.
- *
- * Context: User context only. This function may sleep if pagefaults are
- * enabled.
- *
- * This macro copies a single simple value from kernel space to user
- * space. It supports simple types like char and int, but not larger
- * data types like structures or arrays.
- *
- * @ptr must have pointer-to-simple-variable type, and @x must be assignable
- * to the result of dereferencing @ptr.
- *
- * Caller must check the pointer with access_ok() before calling this
- * function.
- *
- * Returns zero on success, or -EFAULT on error.
- */
-#define __put_user_unaligned(x,ptr) \
- __put_user_unaligned_nocheck((x),(ptr),sizeof(*(ptr)))
-
-/*
- * __get_user_unaligned: - Get a simple variable from user space, with less checking.
- * @x: Variable to store result.
- * @ptr: Source address, in user space.
- *
- * Context: User context only. This function may sleep if pagefaults are
- * enabled.
- *
- * This macro copies a single simple variable from user space to kernel
- * space. It supports simple types like char and int, but not larger
- * data types like structures or arrays.
- *
- * @ptr must have pointer-to-simple-variable type, and the result of
- * dereferencing @ptr must be assignable to @x without a cast.
- *
- * Caller must check the pointer with access_ok() before calling this
- * function.
- *
- * Returns zero on success, or -EFAULT on error.
- * On error, the variable @x is set to zero.
- */
-#define __get_user_unaligned(x,ptr) \
- __get_user_unaligned_nocheck((x),(ptr),sizeof(*(ptr)))
-
-/*
- * Yuck. We need two variants, one for 64bit operation and one
- * for 32 bit mode and old iron.
- */
-#ifdef CONFIG_32BIT
-#define __GET_USER_UNALIGNED_DW(val, ptr) \
- __get_user_unaligned_asm_ll32(val, ptr)
-#endif
-#ifdef CONFIG_64BIT
-#define __GET_USER_UNALIGNED_DW(val, ptr) \
- __get_user_unaligned_asm(val, "uld", ptr)
-#endif
-
-extern void __get_user_unaligned_unknown(void);
-
-#define __get_user_unaligned_common(val, size, ptr) \
-do { \
- switch (size) { \
- case 1: __get_data_asm(val, "lb", ptr); break; \
- case 2: __get_data_unaligned_asm(val, "ulh", ptr); break; \
- case 4: __get_data_unaligned_asm(val, "ulw", ptr); break; \
- case 8: __GET_USER_UNALIGNED_DW(val, ptr); break; \
- default: __get_user_unaligned_unknown(); break; \
- } \
-} while (0)
-
-#define __get_user_unaligned_nocheck(x,ptr,size) \
-({ \
- int __gu_err; \
- \
- __get_user_unaligned_common((x), size, ptr); \
- __gu_err; \
-})
-
-#define __get_user_unaligned_check(x,ptr,size) \
-({ \
- int __gu_err = -EFAULT; \
- const __typeof__(*(ptr)) __user * __gu_ptr = (ptr); \
- \
- if (likely(access_ok(VERIFY_READ, __gu_ptr, size))) \
- __get_user_unaligned_common((x), size, __gu_ptr); \
- \
- __gu_err; \
-})
-
-#define __get_data_unaligned_asm(val, insn, addr) \
-{ \
- long __gu_tmp; \
- \
- __asm__ __volatile__( \
- "1: " insn " %1, %3 \n" \
- "2: \n" \
- " .insn \n" \
- " .section .fixup,\"ax\" \n" \
- "3: li %0, %4 \n" \
- " move %1, $0 \n" \
- " j 2b \n" \
- " .previous \n" \
- " .section __ex_table,\"a\" \n" \
- " "__UA_ADDR "\t1b, 3b \n" \
- " "__UA_ADDR "\t1b + 4, 3b \n" \
- " .previous \n" \
- : "=r" (__gu_err), "=r" (__gu_tmp) \
- : "0" (0), "o" (__m(addr)), "i" (-EFAULT)); \
- \
- (val) = (__typeof__(*(addr))) __gu_tmp; \
-}
-
-/*
- * Get a long long 64 using 32 bit registers.
- */
-#define __get_user_unaligned_asm_ll32(val, addr) \
-{ \
- unsigned long long __gu_tmp; \
- \
- __asm__ __volatile__( \
- "1: ulw %1, (%3) \n" \
- "2: ulw %D1, 4(%3) \n" \
- " move %0, $0 \n" \
- "3: \n" \
- " .insn \n" \
- " .section .fixup,\"ax\" \n" \
- "4: li %0, %4 \n" \
- " move %1, $0 \n" \
- " move %D1, $0 \n" \
- " j 3b \n" \
- " .previous \n" \
- " .section __ex_table,\"a\" \n" \
- " " __UA_ADDR " 1b, 4b \n" \
- " " __UA_ADDR " 1b + 4, 4b \n" \
- " " __UA_ADDR " 2b, 4b \n" \
- " " __UA_ADDR " 2b + 4, 4b \n" \
- " .previous \n" \
- : "=r" (__gu_err), "=&r" (__gu_tmp) \
- : "0" (0), "r" (addr), "i" (-EFAULT)); \
- (val) = (__typeof__(*(addr))) __gu_tmp; \
-}
-
-/*
- * Yuck. We need two variants, one for 64bit operation and one
- * for 32 bit mode and old iron.
- */
-#ifdef CONFIG_32BIT
-#define __PUT_USER_UNALIGNED_DW(ptr) __put_user_unaligned_asm_ll32(ptr)
-#endif
-#ifdef CONFIG_64BIT
-#define __PUT_USER_UNALIGNED_DW(ptr) __put_user_unaligned_asm("usd", ptr)
-#endif
-
-#define __put_user_unaligned_common(ptr, size) \
-do { \
- switch (size) { \
- case 1: __put_data_asm("sb", ptr); break; \
- case 2: __put_user_unaligned_asm("ush", ptr); break; \
- case 4: __put_user_unaligned_asm("usw", ptr); break; \
- case 8: __PUT_USER_UNALIGNED_DW(ptr); break; \
- default: __put_user_unaligned_unknown(); break; \
-} while (0)
-
-#define __put_user_unaligned_nocheck(x,ptr,size) \
-({ \
- __typeof__(*(ptr)) __pu_val; \
- int __pu_err = 0; \
- \
- __pu_val = (x); \
- __put_user_unaligned_common(ptr, size); \
- __pu_err; \
-})
-
-#define __put_user_unaligned_check(x,ptr,size) \
-({ \
- __typeof__(*(ptr)) __user *__pu_addr = (ptr); \
- __typeof__(*(ptr)) __pu_val = (x); \
- int __pu_err = -EFAULT; \
- \
- if (likely(access_ok(VERIFY_WRITE, __pu_addr, size))) \
- __put_user_unaligned_common(__pu_addr, size); \
- \
- __pu_err; \
-})
-
-#define __put_user_unaligned_asm(insn, ptr) \
-{ \
- __asm__ __volatile__( \
- "1: " insn " %z2, %3 # __put_user_unaligned_asm\n" \
- "2: \n" \
- " .insn \n" \
- " .section .fixup,\"ax\" \n" \
- "3: li %0, %4 \n" \
- " j 2b \n" \
- " .previous \n" \
- " .section __ex_table,\"a\" \n" \
- " " __UA_ADDR " 1b, 3b \n" \
- " .previous \n" \
- : "=r" (__pu_err) \
- : "0" (0), "Jr" (__pu_val), "o" (__m(ptr)), \
- "i" (-EFAULT)); \
-}
-
-#define __put_user_unaligned_asm_ll32(ptr) \
-{ \
- __asm__ __volatile__( \
- "1: sw %2, (%3) # __put_user_unaligned_asm_ll32 \n" \
- "2: sw %D2, 4(%3) \n" \
- "3: \n" \
- " .insn \n" \
- " .section .fixup,\"ax\" \n" \
- "4: li %0, %4 \n" \
- " j 3b \n" \
- " .previous \n" \
- " .section __ex_table,\"a\" \n" \
- " " __UA_ADDR " 1b, 4b \n" \
- " " __UA_ADDR " 1b + 4, 4b \n" \
- " " __UA_ADDR " 2b, 4b \n" \
- " " __UA_ADDR " 2b + 4, 4b \n" \
- " .previous" \
- : "=r" (__pu_err) \
- : "0" (0), "r" (__pu_val), "r" (ptr), \
- "i" (-EFAULT)); \
-}
-
-extern void __put_user_unaligned_unknown(void);
-#endif
-
-/*
* We're generating jump to subroutines which will be outside the range of
* jump instructions
*/
diff --git a/arch/mips/include/asm/uasm.h b/arch/mips/include/asm/uasm.h
index 3748f4d..59dae37 100644
--- a/arch/mips/include/asm/uasm.h
+++ b/arch/mips/include/asm/uasm.h
@@ -72,9 +72,12 @@
Ip_u1u2s3(_beql);
Ip_u1s2(_bgez);
Ip_u1s2(_bgezl);
+Ip_u1s2(_bgtz);
+Ip_u1s2(_blez);
Ip_u1s2(_bltz);
Ip_u1s2(_bltzl);
Ip_u1u2s3(_bne);
+Ip_u1(_break);
Ip_u2s3u1(_cache);
Ip_u1u2(_cfc1);
Ip_u2u1(_cfcmsa);
@@ -82,19 +85,28 @@
Ip_u2u1(_ctcmsa);
Ip_u2u1s3(_daddiu);
Ip_u3u1u2(_daddu);
+Ip_u1u2(_ddivu);
Ip_u1(_di);
Ip_u2u1msbu3(_dins);
Ip_u2u1msbu3(_dinsm);
+Ip_u2u1msbu3(_dinsu);
Ip_u1u2(_divu);
Ip_u1u2u3(_dmfc0);
Ip_u1u2u3(_dmtc0);
+Ip_u1u2(_dmultu);
Ip_u2u1u3(_drotr);
Ip_u2u1u3(_drotr32);
+Ip_u2u1(_dsbh);
+Ip_u2u1(_dshd);
Ip_u2u1u3(_dsll);
Ip_u2u1u3(_dsll32);
+Ip_u3u2u1(_dsllv);
Ip_u2u1u3(_dsra);
+Ip_u2u1u3(_dsra32);
+Ip_u3u2u1(_dsrav);
Ip_u2u1u3(_dsrl);
Ip_u2u1u3(_dsrl32);
+Ip_u3u2u1(_dsrlv);
Ip_u3u1u2(_dsubu);
Ip_0(_eret);
Ip_u2u1msbu3(_ext);
@@ -104,6 +116,7 @@
Ip_u2u1(_jalr);
Ip_u1(_jr);
Ip_u2s3u1(_lb);
+Ip_u2s3u1(_lbu);
Ip_u2s3u1(_ld);
Ip_u3u1u2(_ldx);
Ip_u2s3u1(_lh);
@@ -112,27 +125,35 @@
Ip_u2s3u1(_lld);
Ip_u1s2(_lui);
Ip_u2s3u1(_lw);
+Ip_u2s3u1(_lwu);
Ip_u3u1u2(_lwx);
Ip_u1u2u3(_mfc0);
Ip_u1u2u3(_mfhc0);
Ip_u1(_mfhi);
Ip_u1(_mflo);
+Ip_u3u1u2(_movn);
+Ip_u3u1u2(_movz);
Ip_u1u2u3(_mtc0);
Ip_u1u2u3(_mthc0);
Ip_u1(_mthi);
Ip_u1(_mtlo);
Ip_u3u1u2(_mul);
+Ip_u1u2(_multu);
+Ip_u3u1u2(_nor);
Ip_u3u1u2(_or);
Ip_u2u1u3(_ori);
Ip_u2s3u1(_pref);
Ip_0(_rfe);
Ip_u2u1u3(_rotr);
+Ip_u2s3u1(_sb);
Ip_u2s3u1(_sc);
Ip_u2s3u1(_scd);
Ip_u2s3u1(_sd);
+Ip_u2s3u1(_sh);
Ip_u2u1u3(_sll);
Ip_u3u2u1(_sllv);
Ip_s3s1s2(_slt);
+Ip_u2u1s3(_slti);
Ip_u2u1s3(_sltiu);
Ip_u3u1u2(_sltu);
Ip_u2u1u3(_sra);
@@ -248,6 +269,15 @@
uasm_i_dsrl32(p, a1, a2, a3 - 32);
}
+static inline void uasm_i_dsra_safe(u32 **p, unsigned int a1,
+ unsigned int a2, unsigned int a3)
+{
+ if (a3 < 32)
+ uasm_i_dsra(p, a1, a2, a3);
+ else
+ uasm_i_dsra32(p, a1, a2, a3 - 32);
+}
+
/* Handle relocations. */
struct uasm_reloc {
u32 *addr;
diff --git a/arch/mips/include/asm/vdso.h b/arch/mips/include/asm/vdso.h
index 8f4ca5d..b7cd6cf 100644
--- a/arch/mips/include/asm/vdso.h
+++ b/arch/mips/include/asm/vdso.h
@@ -79,8 +79,8 @@
struct {
u64 xtime_sec;
u64 xtime_nsec;
- u32 wall_to_mono_sec;
- u32 wall_to_mono_nsec;
+ u64 wall_to_mono_sec;
+ u64 wall_to_mono_nsec;
u32 seq_count;
u32 cs_shift;
u8 clock_mode;
diff --git a/arch/mips/include/asm/yamon-dt.h b/arch/mips/include/asm/yamon-dt.h
new file mode 100644
index 0000000..485cfe3
--- /dev/null
+++ b/arch/mips/include/asm/yamon-dt.h
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __MIPS_ASM_YAMON_DT_H__
+#define __MIPS_ASM_YAMON_DT_H__
+
+#include <linux/types.h>
+
+/**
+ * struct yamon_mem_region - Represents a contiguous range of physical RAM.
+ * @start: Start physical address.
+ * @size: Maximum size of region.
+ * @discard: Length of additional memory to discard after the region.
+ */
+struct yamon_mem_region {
+ phys_addr_t start;
+ phys_addr_t size;
+ phys_addr_t discard;
+};
+
+/**
+ * yamon_dt_append_cmdline() - Append YAMON-provided command line to /chosen
+ * @fdt: the FDT blob
+ *
+ * Write the YAMON-provided command line to the bootargs property of the
+ * /chosen node in @fdt.
+ *
+ * Return: 0 on success, else -errno
+ */
+extern __init int yamon_dt_append_cmdline(void *fdt);
+
+/**
+ * yamon_dt_append_memory() - Append YAMON-provided memory info to /memory
+ * @fdt: the FDT blob
+ * @regions: zero size terminated array of physical memory regions
+ *
+ * Generate a /memory node in @fdt based upon memory size information provided
+ * by YAMON in its environment and the @regions array.
+ *
+ * Return: 0 on success, else -errno
+ */
+extern __init int yamon_dt_append_memory(void *fdt,
+ const struct yamon_mem_region *regions);
+
+/**
+ * yamon_dt_serial_config() - Append YAMON-provided serial config to /chosen
+ * @fdt: the FDT blob
+ *
+ * Generate a stdout-path property in the /chosen node of @fdt, based upon
+ * information provided in the YAMON environment about the UART configuration
+ * of the system.
+ *
+ * Return: 0 on success, else -errno
+ */
+extern __init int yamon_dt_serial_config(void *fdt);
+
+#endif /* __MIPS_ASM_YAMON_DT_H__ */
diff --git a/arch/mips/include/uapi/asm/inst.h b/arch/mips/include/uapi/asm/inst.h
index b5e46ae..d618975 100644
--- a/arch/mips/include/uapi/asm/inst.h
+++ b/arch/mips/include/uapi/asm/inst.h
@@ -276,12 +276,19 @@
*/
enum bshfl_func {
wsbh_op = 0x2,
- dshd_op = 0x5,
seb_op = 0x10,
seh_op = 0x18,
};
/*
+ * DBSHFL opcodes
+ */
+enum dbshfl_func {
+ dsbh_op = 0x2,
+ dshd_op = 0x5,
+};
+
+/*
* MSA minor opcodes.
*/
enum msa_func {
@@ -755,6 +762,16 @@
;))))))
};
+struct dsp_format { /* SPEC3 DSP format instructions */
+ __BITFIELD_FIELD(unsigned int opcode : 6,
+ __BITFIELD_FIELD(unsigned int base : 5,
+ __BITFIELD_FIELD(unsigned int index : 5,
+ __BITFIELD_FIELD(unsigned int rd : 5,
+ __BITFIELD_FIELD(unsigned int op : 5,
+ __BITFIELD_FIELD(unsigned int func : 6,
+ ;))))))
+};
+
struct spec3_format { /* SPEC3 */
__BITFIELD_FIELD(unsigned int opcode:6,
__BITFIELD_FIELD(unsigned int rs:5,
@@ -1046,6 +1063,7 @@
struct b_format b_format;
struct ps_format ps_format;
struct v_format v_format;
+ struct dsp_format dsp_format;
struct spec3_format spec3_format;
struct fb_format fb_format;
struct fp0_format fp0_format;
diff --git a/arch/mips/include/uapi/asm/ioctls.h b/arch/mips/include/uapi/asm/ioctls.h
index 68e19b6..1609cb0 100644
--- a/arch/mips/include/uapi/asm/ioctls.h
+++ b/arch/mips/include/uapi/asm/ioctls.h
@@ -91,7 +91,7 @@
#define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */
#define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */
#define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */
-#define TIOCGPTPEER _IOR('T', 0x41, int) /* Safely open the slave */
+#define TIOCGPTPEER _IO('T', 0x41) /* Safely open the slave */
/* I hope the range from 0x5480 on is free ... */
#define TIOCSCTTY 0x5480 /* become controlling tty */
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 9a0e37b..46c0581 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -4,7 +4,7 @@
extra-y := head.o vmlinux.lds
-obj-y += cpu-probe.o branch.o elf.o entry.o genex.o idle.o irq.o \
+obj-y += cmpxchg.o cpu-probe.o branch.o elf.o entry.o genex.o idle.o irq.o \
process.o prom.o ptrace.o reset.o setup.o signal.o \
syscall.o time.o topology.o traps.o unaligned.o watch.o \
vdso.o cacheinfo.o
@@ -31,7 +31,6 @@
obj-$(CONFIG_DEBUG_FS) += segment.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o
obj-$(CONFIG_MODULES) += module.o
-obj-$(CONFIG_MODULES_USE_ELF_RELA) += module-rela.o
obj-$(CONFIG_FTRACE_SYSCALLS) += ftrace.o
obj-$(CONFIG_FUNCTION_TRACER) += mcount.o ftrace.o
diff --git a/arch/mips/kernel/branch.c b/arch/mips/kernel/branch.c
index f702a45..b79ed9a 100644
--- a/arch/mips/kernel/branch.c
+++ b/arch/mips/kernel/branch.c
@@ -399,7 +399,7 @@
*
* @regs: Pointer to pt_regs
* @insn: branch instruction to decode
- * @returns: -EFAULT on error and forces SIGBUS, and on success
+ * @returns: -EFAULT on error and forces SIGILL, and on success
* returns 0 or BRANCH_LIKELY_TAKEN as appropriate after
* evaluating the branch.
*
@@ -431,7 +431,7 @@
/* Fall through */
case jr_op:
if (NO_R6EMU && insn.r_format.func == jr_op)
- goto sigill_r6;
+ goto sigill_r2r6;
regs->cp0_epc = regs->regs[insn.r_format.rs];
break;
}
@@ -446,7 +446,7 @@
switch (insn.i_format.rt) {
case bltzl_op:
if (NO_R6EMU)
- goto sigill_r6;
+ goto sigill_r2r6;
case bltz_op:
if ((long)regs->regs[insn.i_format.rs] < 0) {
epc = epc + 4 + (insn.i_format.simmediate << 2);
@@ -459,7 +459,7 @@
case bgezl_op:
if (NO_R6EMU)
- goto sigill_r6;
+ goto sigill_r2r6;
case bgez_op:
if ((long)regs->regs[insn.i_format.rs] >= 0) {
epc = epc + 4 + (insn.i_format.simmediate << 2);
@@ -473,10 +473,8 @@
case bltzal_op:
case bltzall_op:
if (NO_R6EMU && (insn.i_format.rs ||
- insn.i_format.rt == bltzall_op)) {
- ret = -SIGILL;
- break;
- }
+ insn.i_format.rt == bltzall_op))
+ goto sigill_r2r6;
regs->regs[31] = epc + 8;
/*
* OK we are here either because we hit a NAL
@@ -507,10 +505,8 @@
case bgezal_op:
case bgezall_op:
if (NO_R6EMU && (insn.i_format.rs ||
- insn.i_format.rt == bgezall_op)) {
- ret = -SIGILL;
- break;
- }
+ insn.i_format.rt == bgezall_op))
+ goto sigill_r2r6;
regs->regs[31] = epc + 8;
/*
* OK we are here either because we hit a BAL
@@ -556,6 +552,7 @@
/*
* These are unconditional and in j_format.
*/
+ case jalx_op:
case jal_op:
regs->regs[31] = regs->cp0_epc + 8;
case j_op:
@@ -573,7 +570,7 @@
*/
case beql_op:
if (NO_R6EMU)
- goto sigill_r6;
+ goto sigill_r2r6;
case beq_op:
if (regs->regs[insn.i_format.rs] ==
regs->regs[insn.i_format.rt]) {
@@ -587,7 +584,7 @@
case bnel_op:
if (NO_R6EMU)
- goto sigill_r6;
+ goto sigill_r2r6;
case bne_op:
if (regs->regs[insn.i_format.rs] !=
regs->regs[insn.i_format.rt]) {
@@ -601,7 +598,7 @@
case blezl_op: /* not really i_format */
if (!insn.i_format.rt && NO_R6EMU)
- goto sigill_r6;
+ goto sigill_r2r6;
case blez_op:
/*
* Compact branches for R6 for the
@@ -636,7 +633,7 @@
case bgtzl_op:
if (!insn.i_format.rt && NO_R6EMU)
- goto sigill_r6;
+ goto sigill_r2r6;
case bgtz_op:
/*
* Compact branches for R6 for the
@@ -774,35 +771,27 @@
#else
case bc6_op:
/* Only valid for MIPS R6 */
- if (!cpu_has_mips_r6) {
- ret = -SIGILL;
- break;
- }
+ if (!cpu_has_mips_r6)
+ goto sigill_r6;
regs->cp0_epc += 8;
break;
case balc6_op:
- if (!cpu_has_mips_r6) {
- ret = -SIGILL;
- break;
- }
+ if (!cpu_has_mips_r6)
+ goto sigill_r6;
/* Compact branch: BALC */
regs->regs[31] = epc + 4;
epc += 4 + (insn.i_format.simmediate << 2);
regs->cp0_epc = epc;
break;
case pop66_op:
- if (!cpu_has_mips_r6) {
- ret = -SIGILL;
- break;
- }
+ if (!cpu_has_mips_r6)
+ goto sigill_r6;
/* Compact branch: BEQZC || JIC */
regs->cp0_epc += 8;
break;
case pop76_op:
- if (!cpu_has_mips_r6) {
- ret = -SIGILL;
- break;
- }
+ if (!cpu_has_mips_r6)
+ goto sigill_r6;
/* Compact branch: BNEZC || JIALC */
if (!insn.i_format.rs) {
/* JIALC: set $31/ra */
@@ -814,10 +803,8 @@
case pop10_op:
case pop30_op:
/* Only valid for MIPS R6 */
- if (!cpu_has_mips_r6) {
- ret = -SIGILL;
- break;
- }
+ if (!cpu_has_mips_r6)
+ goto sigill_r6;
/*
* Compact branches:
* bovc, beqc, beqzalc, bnvc, bnec, bnezlac
@@ -831,12 +818,18 @@
return ret;
sigill_dsp:
- printk("%s: DSP branch but not DSP ASE - sending SIGBUS.\n", current->comm);
- force_sig(SIGBUS, current);
+ pr_debug("%s: DSP branch but not DSP ASE - sending SIGILL.\n",
+ current->comm);
+ force_sig(SIGILL, current);
+ return -EFAULT;
+sigill_r2r6:
+ pr_debug("%s: R2 branch but r2-to-r6 emulator is not present - sending SIGILL.\n",
+ current->comm);
+ force_sig(SIGILL, current);
return -EFAULT;
sigill_r6:
- pr_info("%s: R2 branch but r2-to-r6 emulator is not preset - sending SIGILL.\n",
- current->comm);
+ pr_debug("%s: R6 branch but no MIPSr6 ISA support - sending SIGILL.\n",
+ current->comm);
force_sig(SIGILL, current);
return -EFAULT;
}
diff --git a/arch/mips/kernel/cmpxchg.c b/arch/mips/kernel/cmpxchg.c
new file mode 100644
index 0000000..7730f1d
--- /dev/null
+++ b/arch/mips/kernel/cmpxchg.c
@@ -0,0 +1,109 @@
+/*
+ * Copyright (C) 2017 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/bitops.h>
+#include <asm/cmpxchg.h>
+
+unsigned long __xchg_small(volatile void *ptr, unsigned long val, unsigned int size)
+{
+ u32 old32, new32, load32, mask;
+ volatile u32 *ptr32;
+ unsigned int shift;
+
+ /* Check that ptr is naturally aligned */
+ WARN_ON((unsigned long)ptr & (size - 1));
+
+ /* Mask value to the correct size. */
+ mask = GENMASK((size * BITS_PER_BYTE) - 1, 0);
+ val &= mask;
+
+ /*
+ * Calculate a shift & mask that correspond to the value we wish to
+ * exchange within the naturally aligned 4 byte integerthat includes
+ * it.
+ */
+ shift = (unsigned long)ptr & 0x3;
+ if (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
+ shift ^= sizeof(u32) - size;
+ shift *= BITS_PER_BYTE;
+ mask <<= shift;
+
+ /*
+ * Calculate a pointer to the naturally aligned 4 byte integer that
+ * includes our byte of interest, and load its value.
+ */
+ ptr32 = (volatile u32 *)((unsigned long)ptr & ~0x3);
+ load32 = *ptr32;
+
+ do {
+ old32 = load32;
+ new32 = (load32 & ~mask) | (val << shift);
+ load32 = cmpxchg(ptr32, old32, new32);
+ } while (load32 != old32);
+
+ return (load32 & mask) >> shift;
+}
+
+unsigned long __cmpxchg_small(volatile void *ptr, unsigned long old,
+ unsigned long new, unsigned int size)
+{
+ u32 mask, old32, new32, load32;
+ volatile u32 *ptr32;
+ unsigned int shift;
+ u8 load;
+
+ /* Check that ptr is naturally aligned */
+ WARN_ON((unsigned long)ptr & (size - 1));
+
+ /* Mask inputs to the correct size. */
+ mask = GENMASK((size * BITS_PER_BYTE) - 1, 0);
+ old &= mask;
+ new &= mask;
+
+ /*
+ * Calculate a shift & mask that correspond to the value we wish to
+ * compare & exchange within the naturally aligned 4 byte integer
+ * that includes it.
+ */
+ shift = (unsigned long)ptr & 0x3;
+ if (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
+ shift ^= sizeof(u32) - size;
+ shift *= BITS_PER_BYTE;
+ mask <<= shift;
+
+ /*
+ * Calculate a pointer to the naturally aligned 4 byte integer that
+ * includes our byte of interest, and load its value.
+ */
+ ptr32 = (volatile u32 *)((unsigned long)ptr & ~0x3);
+ load32 = *ptr32;
+
+ while (true) {
+ /*
+ * Ensure the byte we want to exchange matches the expected
+ * old value, and if not then bail.
+ */
+ load = (load32 & mask) >> shift;
+ if (load != old)
+ return load;
+
+ /*
+ * Calculate the old & new values of the naturally aligned
+ * 4 byte integer that include the byte we want to exchange.
+ * Attempt to exchange the old value for the new value, and
+ * return if we succeed.
+ */
+ old32 = (load32 & ~mask) | (old << shift);
+ new32 = (load32 & ~mask) | (new << shift);
+ load32 = cmpxchg(ptr32, old32, new32);
+ if (load32 == old32)
+ return old;
+ }
+}
diff --git a/arch/mips/kernel/cps-vec.S b/arch/mips/kernel/cps-vec.S
index a00e87b..b849fe6 100644
--- a/arch/mips/kernel/cps-vec.S
+++ b/arch/mips/kernel/cps-vec.S
@@ -22,6 +22,7 @@
#define GCR_CL_COHERENCE_OFS 0x2008
#define GCR_CL_ID_OFS 0x2028
+#define CPC_CL_VC_STOP_OFS 0x2020
#define CPC_CL_VC_RUN_OFS 0x2028
.extern mips_cm_base
@@ -376,8 +377,12 @@
PTR_LI t2, UNCAC_BASE
PTR_ADD t1, t1, t2
- /* Set VC_RUN to the VPE mask */
+ /* Start any other VPs that ought to be running */
PTR_S ta2, CPC_CL_VC_RUN_OFS(t1)
+
+ /* Ensure this VP stops running if it shouldn't be */
+ not ta2
+ PTR_S ta2, CPC_CL_VC_STOP_OFS(t1)
ehb
#elif defined(CONFIG_MIPS_MT)
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 1aba277..d08afc7 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -564,6 +564,7 @@
back_to_back_c0_hazard();
break;
case CPU_I6400:
+ case CPU_I6500:
/* There's no way to disable the FTLB */
if (!(flags & FTLB_EN))
return 1;
@@ -844,6 +845,8 @@
c->options |= MIPS_CPU_MVH;
if (cpu_has_mips_r6 && (config5 & MIPS_CONF5_VP))
c->options |= MIPS_CPU_VP;
+ if (config5 & MIPS_CONF5_CA2)
+ c->ases |= MIPS_ASE_MIPS16E2;
return config5 & MIPS_CONF_M;
}
@@ -1635,6 +1638,10 @@
c->cputype = CPU_I6400;
__cpu_name[cpu] = "MIPS I6400";
break;
+ case PRID_IMP_I6500:
+ c->cputype = CPU_I6500;
+ __cpu_name[cpu] = "MIPS I6500";
+ break;
case PRID_IMP_M5150:
c->cputype = CPU_M5150;
__cpu_name[cpu] = "MIPS M5150";
@@ -1648,6 +1655,17 @@
decode_configs(c);
spram_config();
+
+ switch (__get_cpu_type(c->cputype)) {
+ case CPU_I6500:
+ c->options |= MIPS_CPU_SHARED_FTLB_ENTRIES;
+ /* fall-through */
+ case CPU_I6400:
+ c->options |= MIPS_CPU_SHARED_FTLB_RAM;
+ /* fall-through */
+ default:
+ break;
+ }
}
static inline void cpu_probe_alchemy(struct cpuinfo_mips *c, unsigned int cpu)
@@ -1831,6 +1849,12 @@
set_elf_platform(cpu, "loongson3a");
set_isa(c, MIPS_CPU_ISA_M64R2);
break;
+ case PRID_REV_LOONGSON3A_R3:
+ c->cputype = CPU_LOONGSON3;
+ __cpu_name[cpu] = "ICT Loongson-3";
+ set_elf_platform(cpu, "loongson3a");
+ set_isa(c, MIPS_CPU_ISA_M64R2);
+ break;
}
decode_configs(c);
diff --git a/arch/mips/kernel/mips-cm.c b/arch/mips/kernel/mips-cm.c
index 659e6d3..cb0c57f 100644
--- a/arch/mips/kernel/mips-cm.c
+++ b/arch/mips/kernel/mips-cm.c
@@ -265,15 +265,34 @@
u32 val;
preempt_disable();
- curr_core = current_cpu_data.core;
- spin_lock_irqsave(&per_cpu(cm_core_lock, curr_core),
- per_cpu(cm_core_lock_flags, curr_core));
if (mips_cm_revision() >= CM_REV_CM3) {
val = core << CM3_GCR_Cx_OTHER_CORE_SHF;
val |= vp << CM3_GCR_Cx_OTHER_VP_SHF;
+
+ /*
+ * We need to disable interrupts in SMP systems in order to
+ * ensure that we don't interrupt the caller with code which
+ * may modify the redirect register. We do so here in a
+ * slightly obscure way by using a spin lock, since this has
+ * the neat property of also catching any nested uses of
+ * mips_cm_lock_other() leading to a deadlock or a nice warning
+ * with lockdep enabled.
+ */
+ spin_lock_irqsave(this_cpu_ptr(&cm_core_lock),
+ *this_cpu_ptr(&cm_core_lock_flags));
} else {
- BUG_ON(vp != 0);
+ WARN_ON(vp != 0);
+
+ /*
+ * We only have a GCR_CL_OTHER per core in systems with
+ * CM 2.5 & older, so have to ensure other VP(E)s don't
+ * race with us.
+ */
+ curr_core = current_cpu_data.core;
+ spin_lock_irqsave(&per_cpu(cm_core_lock, curr_core),
+ per_cpu(cm_core_lock_flags, curr_core));
+
val = core << CM_GCR_Cx_OTHER_CORENUM_SHF;
}
@@ -288,10 +307,17 @@
void mips_cm_unlock_other(void)
{
- unsigned curr_core = current_cpu_data.core;
+ unsigned int curr_core;
- spin_unlock_irqrestore(&per_cpu(cm_core_lock, curr_core),
- per_cpu(cm_core_lock_flags, curr_core));
+ if (mips_cm_revision() < CM_REV_CM3) {
+ curr_core = current_cpu_data.core;
+ spin_unlock_irqrestore(&per_cpu(cm_core_lock, curr_core),
+ per_cpu(cm_core_lock_flags, curr_core));
+ } else {
+ spin_unlock_irqrestore(this_cpu_ptr(&cm_core_lock),
+ *this_cpu_ptr(&cm_core_lock_flags));
+ }
+
preempt_enable();
}
diff --git a/arch/mips/kernel/module-rela.c b/arch/mips/kernel/module-rela.c
deleted file mode 100644
index 7811688..0000000
--- a/arch/mips/kernel/module-rela.c
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Copyright (C) 2001 Rusty Russell.
- * Copyright (C) 2003, 2004 Ralf Baechle (ralf@linux-mips.org)
- * Copyright (C) 2005 Thiemo Seufer
- * Copyright (C) 2015 Imagination Technologies Ltd.
- */
-
-#include <linux/elf.h>
-#include <linux/err.h>
-#include <linux/errno.h>
-#include <linux/moduleloader.h>
-
-extern int apply_r_mips_none(struct module *me, u32 *location, Elf_Addr v);
-
-static int apply_r_mips_32_rela(struct module *me, u32 *location, Elf_Addr v)
-{
- *location = v;
-
- return 0;
-}
-
-static int apply_r_mips_26_rela(struct module *me, u32 *location, Elf_Addr v)
-{
- if (v % 4) {
- pr_err("module %s: dangerous R_MIPS_26 RELA relocation\n",
- me->name);
- return -ENOEXEC;
- }
-
- if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
- pr_err("module %s: relocation overflow\n", me->name);
- return -ENOEXEC;
- }
-
- *location = (*location & ~0x03ffffff) | ((v >> 2) & 0x03ffffff);
-
- return 0;
-}
-
-static int apply_r_mips_hi16_rela(struct module *me, u32 *location, Elf_Addr v)
-{
- *location = (*location & 0xffff0000) |
- ((((long long) v + 0x8000LL) >> 16) & 0xffff);
-
- return 0;
-}
-
-static int apply_r_mips_lo16_rela(struct module *me, u32 *location, Elf_Addr v)
-{
- *location = (*location & 0xffff0000) | (v & 0xffff);
-
- return 0;
-}
-
-static int apply_r_mips_pc_rela(struct module *me, u32 *location, Elf_Addr v,
- unsigned bits)
-{
- unsigned long mask = GENMASK(bits - 1, 0);
- unsigned long se_bits;
- long offset;
-
- if (v % 4) {
- pr_err("module %s: dangerous R_MIPS_PC%u RELA relocation\n",
- me->name, bits);
- return -ENOEXEC;
- }
-
- offset = ((long)v - (long)location) >> 2;
-
- /* check the sign bit onwards are identical - ie. we didn't overflow */
- se_bits = (offset & BIT(bits - 1)) ? ~0ul : 0;
- if ((offset & ~mask) != (se_bits & ~mask)) {
- pr_err("module %s: relocation overflow\n", me->name);
- return -ENOEXEC;
- }
-
- *location = (*location & ~mask) | (offset & mask);
-
- return 0;
-}
-
-static int apply_r_mips_pc16_rela(struct module *me, u32 *location, Elf_Addr v)
-{
- return apply_r_mips_pc_rela(me, location, v, 16);
-}
-
-static int apply_r_mips_pc21_rela(struct module *me, u32 *location, Elf_Addr v)
-{
- return apply_r_mips_pc_rela(me, location, v, 21);
-}
-
-static int apply_r_mips_pc26_rela(struct module *me, u32 *location, Elf_Addr v)
-{
- return apply_r_mips_pc_rela(me, location, v, 26);
-}
-
-static int apply_r_mips_64_rela(struct module *me, u32 *location, Elf_Addr v)
-{
- *(Elf_Addr *)location = v;
-
- return 0;
-}
-
-static int apply_r_mips_higher_rela(struct module *me, u32 *location,
- Elf_Addr v)
-{
- *location = (*location & 0xffff0000) |
- ((((long long) v + 0x80008000LL) >> 32) & 0xffff);
-
- return 0;
-}
-
-static int apply_r_mips_highest_rela(struct module *me, u32 *location,
- Elf_Addr v)
-{
- *location = (*location & 0xffff0000) |
- ((((long long) v + 0x800080008000LL) >> 48) & 0xffff);
-
- return 0;
-}
-
-static int (*reloc_handlers_rela[]) (struct module *me, u32 *location,
- Elf_Addr v) = {
- [R_MIPS_NONE] = apply_r_mips_none,
- [R_MIPS_32] = apply_r_mips_32_rela,
- [R_MIPS_26] = apply_r_mips_26_rela,
- [R_MIPS_HI16] = apply_r_mips_hi16_rela,
- [R_MIPS_LO16] = apply_r_mips_lo16_rela,
- [R_MIPS_PC16] = apply_r_mips_pc16_rela,
- [R_MIPS_64] = apply_r_mips_64_rela,
- [R_MIPS_HIGHER] = apply_r_mips_higher_rela,
- [R_MIPS_HIGHEST] = apply_r_mips_highest_rela,
- [R_MIPS_PC21_S2] = apply_r_mips_pc21_rela,
- [R_MIPS_PC26_S2] = apply_r_mips_pc26_rela,
-};
-
-int apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
- unsigned int symindex, unsigned int relsec,
- struct module *me)
-{
- Elf_Mips_Rela *rel = (void *) sechdrs[relsec].sh_addr;
- int (*handler)(struct module *me, u32 *location, Elf_Addr v);
- Elf_Sym *sym;
- u32 *location;
- unsigned int i, type;
- Elf_Addr v;
- int res;
-
- pr_debug("Applying relocate section %u to %u\n", relsec,
- sechdrs[relsec].sh_info);
-
- for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
- /* This is where to make the change */
- location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
- + rel[i].r_offset;
- /* This is the symbol it is referring to */
- sym = (Elf_Sym *)sechdrs[symindex].sh_addr
- + ELF_MIPS_R_SYM(rel[i]);
- if (sym->st_value >= -MAX_ERRNO) {
- /* Ignore unresolved weak symbol */
- if (ELF_ST_BIND(sym->st_info) == STB_WEAK)
- continue;
- pr_warn("%s: Unknown symbol %s\n",
- me->name, strtab + sym->st_name);
- return -ENOENT;
- }
-
- type = ELF_MIPS_R_TYPE(rel[i]);
-
- if (type < ARRAY_SIZE(reloc_handlers_rela))
- handler = reloc_handlers_rela[type];
- else
- handler = NULL;
-
- if (!handler) {
- pr_err("%s: Unknown relocation type %u\n",
- me->name, type);
- return -EINVAL;
- }
-
- v = sym->st_value + rel[i].r_addend;
- res = handler(me, location, v);
- if (res)
- return res;
- }
-
- return 0;
-}
diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c
index 50c020c..4916051 100644
--- a/arch/mips/kernel/module.c
+++ b/arch/mips/kernel/module.c
@@ -53,22 +53,25 @@
}
#endif
-int apply_r_mips_none(struct module *me, u32 *location, Elf_Addr v)
+static int apply_r_mips_none(struct module *me, u32 *location,
+ u32 base, Elf_Addr v, bool rela)
{
return 0;
}
-static int apply_r_mips_32_rel(struct module *me, u32 *location, Elf_Addr v)
+static int apply_r_mips_32(struct module *me, u32 *location,
+ u32 base, Elf_Addr v, bool rela)
{
- *location += v;
+ *location = base + v;
return 0;
}
-static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v)
+static int apply_r_mips_26(struct module *me, u32 *location,
+ u32 base, Elf_Addr v, bool rela)
{
if (v % 4) {
- pr_err("module %s: dangerous R_MIPS_26 REL relocation\n",
+ pr_err("module %s: dangerous R_MIPS_26 relocation\n",
me->name);
return -ENOEXEC;
}
@@ -80,15 +83,22 @@
}
*location = (*location & ~0x03ffffff) |
- ((*location + (v >> 2)) & 0x03ffffff);
+ ((base + (v >> 2)) & 0x03ffffff);
return 0;
}
-static int apply_r_mips_hi16_rel(struct module *me, u32 *location, Elf_Addr v)
+static int apply_r_mips_hi16(struct module *me, u32 *location,
+ u32 base, Elf_Addr v, bool rela)
{
struct mips_hi16 *n;
+ if (rela) {
+ *location = (*location & 0xffff0000) |
+ ((((long long) v + 0x8000LL) >> 16) & 0xffff);
+ return 0;
+ }
+
/*
* We cannot relocate this one now because we don't know the value of
* the carry we need to add. Save the information, and let LO16 do the
@@ -117,12 +127,18 @@
}
}
-static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v)
+static int apply_r_mips_lo16(struct module *me, u32 *location,
+ u32 base, Elf_Addr v, bool rela)
{
- unsigned long insnlo = *location;
+ unsigned long insnlo = base;
struct mips_hi16 *l;
Elf_Addr val, vallo;
+ if (rela) {
+ *location = (*location & 0xffff0000) | (v & 0xffff);
+ return 0;
+ }
+
/* Sign extend the addend we extract from the lo insn. */
vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
@@ -178,26 +194,26 @@
free_relocation_chain(l);
me->arch.r_mips_hi16_list = NULL;
- pr_err("module %s: dangerous R_MIPS_LO16 REL relocation\n", me->name);
+ pr_err("module %s: dangerous R_MIPS_LO16 relocation\n", me->name);
return -ENOEXEC;
}
-static int apply_r_mips_pc_rel(struct module *me, u32 *location, Elf_Addr v,
- unsigned bits)
+static int apply_r_mips_pc(struct module *me, u32 *location, u32 base,
+ Elf_Addr v, unsigned int bits)
{
unsigned long mask = GENMASK(bits - 1, 0);
unsigned long se_bits;
long offset;
if (v % 4) {
- pr_err("module %s: dangerous R_MIPS_PC%u REL relocation\n",
+ pr_err("module %s: dangerous R_MIPS_PC%u relocation\n",
me->name, bits);
return -ENOEXEC;
}
- /* retrieve & sign extend implicit addend */
- offset = *location & mask;
+ /* retrieve & sign extend implicit addend if any */
+ offset = base & mask;
offset |= (offset & BIT(bits - 1)) ? ~mask : 0;
offset += ((long)v - (long)location) >> 2;
@@ -214,100 +230,193 @@
return 0;
}
-static int apply_r_mips_pc16_rel(struct module *me, u32 *location, Elf_Addr v)
+static int apply_r_mips_pc16(struct module *me, u32 *location,
+ u32 base, Elf_Addr v, bool rela)
{
- return apply_r_mips_pc_rel(me, location, v, 16);
+ return apply_r_mips_pc(me, location, base, v, 16);
}
-static int apply_r_mips_pc21_rel(struct module *me, u32 *location, Elf_Addr v)
+static int apply_r_mips_pc21(struct module *me, u32 *location,
+ u32 base, Elf_Addr v, bool rela)
{
- return apply_r_mips_pc_rel(me, location, v, 21);
+ return apply_r_mips_pc(me, location, base, v, 21);
}
-static int apply_r_mips_pc26_rel(struct module *me, u32 *location, Elf_Addr v)
+static int apply_r_mips_pc26(struct module *me, u32 *location,
+ u32 base, Elf_Addr v, bool rela)
{
- return apply_r_mips_pc_rel(me, location, v, 26);
+ return apply_r_mips_pc(me, location, base, v, 26);
}
-static int (*reloc_handlers_rel[]) (struct module *me, u32 *location,
- Elf_Addr v) = {
+static int apply_r_mips_64(struct module *me, u32 *location,
+ u32 base, Elf_Addr v, bool rela)
+{
+ if (WARN_ON(!rela))
+ return -EINVAL;
+
+ *(Elf_Addr *)location = v;
+
+ return 0;
+}
+
+static int apply_r_mips_higher(struct module *me, u32 *location,
+ u32 base, Elf_Addr v, bool rela)
+{
+ if (WARN_ON(!rela))
+ return -EINVAL;
+
+ *location = (*location & 0xffff0000) |
+ ((((long long)v + 0x80008000LL) >> 32) & 0xffff);
+
+ return 0;
+}
+
+static int apply_r_mips_highest(struct module *me, u32 *location,
+ u32 base, Elf_Addr v, bool rela)
+{
+ if (WARN_ON(!rela))
+ return -EINVAL;
+
+ *location = (*location & 0xffff0000) |
+ ((((long long)v + 0x800080008000LL) >> 48) & 0xffff);
+
+ return 0;
+}
+
+/**
+ * reloc_handler() - Apply a particular relocation to a module
+ * @me: the module to apply the reloc to
+ * @location: the address at which the reloc is to be applied
+ * @base: the existing value at location for REL-style; 0 for RELA-style
+ * @v: the value of the reloc, with addend for RELA-style
+ *
+ * Each implemented reloc_handler function applies a particular type of
+ * relocation to the module @me. Relocs that may be found in either REL or RELA
+ * variants can be handled by making use of the @base & @v parameters which are
+ * set to values which abstract the difference away from the particular reloc
+ * implementations.
+ *
+ * Return: 0 upon success, else -ERRNO
+ */
+typedef int (*reloc_handler)(struct module *me, u32 *location,
+ u32 base, Elf_Addr v, bool rela);
+
+/* The handlers for known reloc types */
+static reloc_handler reloc_handlers[] = {
[R_MIPS_NONE] = apply_r_mips_none,
- [R_MIPS_32] = apply_r_mips_32_rel,
- [R_MIPS_26] = apply_r_mips_26_rel,
- [R_MIPS_HI16] = apply_r_mips_hi16_rel,
- [R_MIPS_LO16] = apply_r_mips_lo16_rel,
- [R_MIPS_PC16] = apply_r_mips_pc16_rel,
- [R_MIPS_PC21_S2] = apply_r_mips_pc21_rel,
- [R_MIPS_PC26_S2] = apply_r_mips_pc26_rel,
+ [R_MIPS_32] = apply_r_mips_32,
+ [R_MIPS_26] = apply_r_mips_26,
+ [R_MIPS_HI16] = apply_r_mips_hi16,
+ [R_MIPS_LO16] = apply_r_mips_lo16,
+ [R_MIPS_PC16] = apply_r_mips_pc16,
+ [R_MIPS_64] = apply_r_mips_64,
+ [R_MIPS_HIGHER] = apply_r_mips_higher,
+ [R_MIPS_HIGHEST] = apply_r_mips_highest,
+ [R_MIPS_PC21_S2] = apply_r_mips_pc21,
+ [R_MIPS_PC26_S2] = apply_r_mips_pc26,
};
-int apply_relocate(Elf_Shdr *sechdrs, const char *strtab,
- unsigned int symindex, unsigned int relsec,
- struct module *me)
+static int __apply_relocate(Elf_Shdr *sechdrs, const char *strtab,
+ unsigned int symindex, unsigned int relsec,
+ struct module *me, bool rela)
{
- Elf_Mips_Rel *rel = (void *) sechdrs[relsec].sh_addr;
- int (*handler)(struct module *me, u32 *location, Elf_Addr v);
+ union {
+ Elf_Mips_Rel *rel;
+ Elf_Mips_Rela *rela;
+ } r;
+ reloc_handler handler;
Elf_Sym *sym;
- u32 *location;
+ u32 *location, base;
unsigned int i, type;
Elf_Addr v;
- int res;
+ int err = 0;
+ size_t reloc_sz;
pr_debug("Applying relocate section %u to %u\n", relsec,
sechdrs[relsec].sh_info);
+ r.rel = (void *)sechdrs[relsec].sh_addr;
+ reloc_sz = rela ? sizeof(*r.rela) : sizeof(*r.rel);
me->arch.r_mips_hi16_list = NULL;
- for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+ for (i = 0; i < sechdrs[relsec].sh_size / reloc_sz; i++) {
/* This is where to make the change */
location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
- + rel[i].r_offset;
+ + r.rel->r_offset;
/* This is the symbol it is referring to */
sym = (Elf_Sym *)sechdrs[symindex].sh_addr
- + ELF_MIPS_R_SYM(rel[i]);
+ + ELF_MIPS_R_SYM(*r.rel);
if (sym->st_value >= -MAX_ERRNO) {
/* Ignore unresolved weak symbol */
if (ELF_ST_BIND(sym->st_info) == STB_WEAK)
continue;
pr_warn("%s: Unknown symbol %s\n",
me->name, strtab + sym->st_name);
- return -ENOENT;
+ err = -ENOENT;
+ goto out;
}
- type = ELF_MIPS_R_TYPE(rel[i]);
-
- if (type < ARRAY_SIZE(reloc_handlers_rel))
- handler = reloc_handlers_rel[type];
+ type = ELF_MIPS_R_TYPE(*r.rel);
+ if (type < ARRAY_SIZE(reloc_handlers))
+ handler = reloc_handlers[type];
else
handler = NULL;
if (!handler) {
pr_err("%s: Unknown relocation type %u\n",
me->name, type);
- return -EINVAL;
+ err = -EINVAL;
+ goto out;
}
- v = sym->st_value;
- res = handler(me, location, v);
- if (res)
- return res;
+ if (rela) {
+ v = sym->st_value + r.rela->r_addend;
+ base = 0;
+ r.rela = &r.rela[1];
+ } else {
+ v = sym->st_value;
+ base = *location;
+ r.rel = &r.rel[1];
+ }
+
+ err = handler(me, location, base, v, rela);
+ if (err)
+ goto out;
}
+out:
/*
- * Normally the hi16 list should be deallocated at this point. A
+ * Normally the hi16 list should be deallocated at this point. A
* malformed binary however could contain a series of R_MIPS_HI16
- * relocations not followed by a R_MIPS_LO16 relocation. In that
- * case, free up the list and return an error.
+ * relocations not followed by a R_MIPS_LO16 relocation, or if we hit
+ * an error processing a reloc we might have gotten here before
+ * reaching the R_MIPS_LO16. In either case, free up the list and
+ * return an error.
*/
if (me->arch.r_mips_hi16_list) {
free_relocation_chain(me->arch.r_mips_hi16_list);
me->arch.r_mips_hi16_list = NULL;
-
- return -ENOEXEC;
+ err = err ?: -ENOEXEC;
}
- return 0;
+ return err;
}
+int apply_relocate(Elf_Shdr *sechdrs, const char *strtab,
+ unsigned int symindex, unsigned int relsec,
+ struct module *me)
+{
+ return __apply_relocate(sechdrs, strtab, symindex, relsec, me, false);
+}
+
+#ifdef CONFIG_MODULES_USE_ELF_RELA
+int apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
+ unsigned int symindex, unsigned int relsec,
+ struct module *me)
+{
+ return __apply_relocate(sechdrs, strtab, symindex, relsec, me, true);
+}
+#endif /* CONFIG_MODULES_USE_ELF_RELA */
+
/* Given an address, look for it in the module exception tables. */
const struct exception_table_entry *search_module_dbetables(unsigned long addr)
{
diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c
index f3e301f..9e6c74b 100644
--- a/arch/mips/kernel/perf_event_mipsxx.c
+++ b/arch/mips/kernel/perf_event_mipsxx.c
@@ -814,7 +814,7 @@
[PERF_COUNT_HW_BRANCH_MISSES] = { 0x27, CNTR_ODD, T },
};
-static const struct mips_perf_event i6400_event_map[PERF_COUNT_HW_MAX] = {
+static const struct mips_perf_event i6x00_event_map[PERF_COUNT_HW_MAX] = {
[PERF_COUNT_HW_CPU_CYCLES] = { 0x00, CNTR_EVEN | CNTR_ODD },
[PERF_COUNT_HW_INSTRUCTIONS] = { 0x01, CNTR_EVEN | CNTR_ODD },
/* These only count dcache, not icache */
@@ -1014,7 +1014,7 @@
},
};
-static const struct mips_perf_event i6400_cache_map
+static const struct mips_perf_event i6x00_cache_map
[PERF_COUNT_HW_CACHE_MAX]
[PERF_COUNT_HW_CACHE_OP_MAX]
[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
@@ -1610,6 +1610,7 @@
#endif
break;
case CPU_I6400:
+ case CPU_I6500:
/* 8-bit event numbers */
base_id = config & 0xff;
raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD;
@@ -1770,8 +1771,13 @@
break;
case CPU_I6400:
mipspmu.name = "mips/I6400";
- mipspmu.general_event_map = &i6400_event_map;
- mipspmu.cache_event_map = &i6400_cache_map;
+ mipspmu.general_event_map = &i6x00_event_map;
+ mipspmu.cache_event_map = &i6x00_cache_map;
+ break;
+ case CPU_I6500:
+ mipspmu.name = "mips/I6500";
+ mipspmu.general_event_map = &i6x00_event_map;
+ mipspmu.cache_event_map = &i6x00_cache_map;
break;
case CPU_1004K:
mipspmu.name = "mips/1004K";
diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c
index 4eff2ae..70604c7 100644
--- a/arch/mips/kernel/proc.c
+++ b/arch/mips/kernel/proc.c
@@ -83,7 +83,7 @@
}
seq_printf(m, "isa\t\t\t:");
- if (cpu_has_mips_r1)
+ if (cpu_has_mips_1)
seq_printf(m, " mips1");
if (cpu_has_mips_2)
seq_printf(m, "%s", " mips2");
@@ -109,6 +109,7 @@
seq_printf(m, "ASEs implemented\t:");
if (cpu_has_mips16) seq_printf(m, "%s", " mips16");
+ if (cpu_has_mips16e2) seq_printf(m, "%s", " mips16e2");
if (cpu_has_mdmx) seq_printf(m, "%s", " mdmx");
if (cpu_has_mips3d) seq_printf(m, "%s", " mips3d");
if (cpu_has_smartmips) seq_printf(m, "%s", " smartmips");
diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c
index 6931fe7..6dd1364 100644
--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -868,14 +868,39 @@
tracehook_report_syscall_entry(regs))
return -1;
- if (secure_computing(NULL) == -1)
- return -1;
+#ifdef CONFIG_SECCOMP
+ if (unlikely(test_thread_flag(TIF_SECCOMP))) {
+ int ret, i;
+ struct seccomp_data sd;
+
+ sd.nr = syscall;
+ sd.arch = syscall_get_arch();
+ for (i = 0; i < 6; i++) {
+ unsigned long v, r;
+
+ r = mips_get_syscall_arg(&v, current, regs, i);
+ sd.args[i] = r ? 0 : v;
+ }
+ sd.instruction_pointer = KSTK_EIP(current);
+
+ ret = __secure_computing(&sd);
+ if (ret == -1)
+ return ret;
+ }
+#endif
if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
trace_sys_enter(regs, regs->regs[2]);
audit_syscall_entry(syscall, regs->regs[4], regs->regs[5],
regs->regs[6], regs->regs[7]);
+
+ /*
+ * Negative syscall numbers are mistaken for rejected syscalls, but
+ * won't have had the return value set appropriately, so we do so now.
+ */
+ if (syscall < 0)
+ syscall_set_return_value(current, regs, -ENOSYS, 0);
return syscall;
}
@@ -895,7 +920,7 @@
audit_syscall_exit(regs);
if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
- trace_sys_exit(regs, regs->regs[2]);
+ trace_sys_exit(regs, regs_return_value(regs));
if (test_thread_flag(TIF_SYSCALL_TRACE))
tracehook_report_syscall_exit(regs, 0);
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 80ed68b..27c2f90 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -371,7 +371,7 @@
PTR sys_writev
PTR sys_cacheflush
PTR sys_cachectl
- PTR sys_sysmips
+ PTR __sys_sysmips
PTR sys_ni_syscall /* 4150 */
PTR sys_getsid
PTR sys_fdatasync
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index 49765b4..65d5aee 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -311,7 +311,7 @@
PTR sys_sched_getaffinity
PTR sys_cacheflush
PTR sys_cachectl
- PTR sys_sysmips
+ PTR __sys_sysmips
PTR sys_io_setup /* 5200 */
PTR sys_io_destroy
PTR sys_io_getevents
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 90bad2d..cbf190e 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -302,7 +302,7 @@
PTR compat_sys_sched_getaffinity
PTR sys_cacheflush
PTR sys_cachectl
- PTR sys_sysmips
+ PTR __sys_sysmips
PTR compat_sys_io_setup /* 6200 */
PTR sys_io_destroy
PTR compat_sys_io_getevents
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 2dd70bd..c30bc52 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -371,7 +371,7 @@
PTR compat_sys_writev
PTR sys_cacheflush
PTR sys_cachectl
- PTR sys_sysmips
+ PTR __sys_sysmips
PTR sys_ni_syscall /* 4150 */
PTR sys_getsid
PTR sys_fdatasync
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 01d1dbd..fe39397 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -670,6 +670,46 @@
}
early_param("mem", early_parse_mem);
+static int __init early_parse_memmap(char *p)
+{
+ char *oldp;
+ u64 start_at, mem_size;
+
+ if (!p)
+ return -EINVAL;
+
+ if (!strncmp(p, "exactmap", 8)) {
+ pr_err("\"memmap=exactmap\" invalid on MIPS\n");
+ return 0;
+ }
+
+ oldp = p;
+ mem_size = memparse(p, &p);
+ if (p == oldp)
+ return -EINVAL;
+
+ if (*p == '@') {
+ start_at = memparse(p+1, &p);
+ add_memory_region(start_at, mem_size, BOOT_MEM_RAM);
+ } else if (*p == '#') {
+ pr_err("\"memmap=nn#ss\" (force ACPI data) invalid on MIPS\n");
+ return -EINVAL;
+ } else if (*p == '$') {
+ start_at = memparse(p+1, &p);
+ add_memory_region(start_at, mem_size, BOOT_MEM_RESERVED);
+ } else {
+ pr_err("\"memmap\" invalid format!\n");
+ return -EINVAL;
+ }
+
+ if (*p == '\0') {
+ usermem = 1;
+ return 0;
+ } else
+ return -EINVAL;
+}
+early_param("memmap", early_parse_memmap);
+
#ifdef CONFIG_PROC_VMCORE
unsigned long setup_elfcorehdr, setup_elfcorehdr_size;
static int __init early_parse_elfcorehdr(char *p)
diff --git a/arch/mips/kernel/smp-cps.c b/arch/mips/kernel/smp-cps.c
index 36954dd..f832e99 100644
--- a/arch/mips/kernel/smp-cps.c
+++ b/arch/mips/kernel/smp-cps.c
@@ -142,9 +142,11 @@
/* Warn the user if the CCA prevents multi-core */
ncores = mips_cm_numcores();
- if (cca_unsuitable && ncores > 1) {
- pr_warn("Using only one core due to unsuitable CCA 0x%x\n",
- cca);
+ if ((cca_unsuitable || cpu_has_dc_aliases) && ncores > 1) {
+ pr_warn("Using only one core due to %s%s%s\n",
+ cca_unsuitable ? "unsuitable CCA" : "",
+ (cca_unsuitable && cpu_has_dc_aliases) ? " & " : "",
+ cpu_has_dc_aliases ? "dcache aliasing" : "");
for_each_present_cpu(c) {
if (cpu_data[c].core)
@@ -488,6 +490,7 @@
{
unsigned core = cpu_data[cpu].core;
unsigned int vpe_id = cpu_vpe_id(&cpu_data[cpu]);
+ ktime_t fail_time;
unsigned stat;
int err;
@@ -514,6 +517,7 @@
* state, the latter happening when a JTAG probe is connected
* in which case the CPC will refuse to power down the core.
*/
+ fail_time = ktime_add_ms(ktime_get(), 2000);
do {
mips_cm_lock_other(core, 0);
mips_cpc_lock_other(core);
@@ -521,9 +525,28 @@
stat &= CPC_Cx_STAT_CONF_SEQSTATE_MSK;
mips_cpc_unlock_other();
mips_cm_unlock_other();
- } while (stat != CPC_Cx_STAT_CONF_SEQSTATE_D0 &&
- stat != CPC_Cx_STAT_CONF_SEQSTATE_D2 &&
- stat != CPC_Cx_STAT_CONF_SEQSTATE_U2);
+
+ if (stat == CPC_Cx_STAT_CONF_SEQSTATE_D0 ||
+ stat == CPC_Cx_STAT_CONF_SEQSTATE_D2 ||
+ stat == CPC_Cx_STAT_CONF_SEQSTATE_U2)
+ break;
+
+ /*
+ * The core ought to have powered down, but didn't &
+ * now we don't really know what state it's in. It's
+ * likely that its _pwr_up pin has been wired to logic
+ * 1 & it powered back up as soon as we powered it
+ * down...
+ *
+ * The best we can do is warn the user & continue in
+ * the hope that the core is doing nothing harmful &
+ * might behave properly if we online it later.
+ */
+ if (WARN(ktime_after(ktime_get(), fail_time),
+ "CPU%u hasn't powered down, seq. state %u\n",
+ cpu, stat >> CPC_Cx_STAT_CONF_SEQSTATE_SHF))
+ break;
+ } while (1);
/* Indicate the core is powered off */
bitmap_clear(core_power, core, 1);
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index aba1afb..770d4d1 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -335,6 +335,9 @@
static int __init mips_smp_ipi_init(void)
{
+ if (num_possible_cpus() == 1)
+ return 0;
+
mips_smp_ipi_allocate(cpu_possible_mask);
call_desc = irq_to_desc(call_virq);
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index 1dfa7f5..58c6f63 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -29,6 +29,7 @@
#include <linux/sched/task_stack.h>
#include <asm/asm.h>
+#include <asm/asm-eva.h>
#include <asm/branch.h>
#include <asm/cachectl.h>
#include <asm/cacheflush.h>
@@ -131,16 +132,14 @@
__asm__ __volatile__ (
" .set "MIPS_ISA_ARCH_LEVEL" \n"
" li %[err], 0 \n"
- "1: ll %[old], (%[addr]) \n"
+ "1: \n"
+ user_ll("%[old]", "(%[addr])")
" move %[tmp], %[new] \n"
- "2: sc %[tmp], (%[addr]) \n"
- " bnez %[tmp], 4f \n"
+ "2: \n"
+ user_sc("%[tmp]", "(%[addr])")
+ " beqz %[tmp], 1b \n"
"3: \n"
" .insn \n"
- " .subsection 2 \n"
- "4: b 1b \n"
- " .previous \n"
- " \n"
" .section .fixup,\"ax\" \n"
"5: li %[err], %[efault] \n"
" j 3b \n"
@@ -192,6 +191,12 @@
unreachable();
}
+/*
+ * mips_atomic_set() normally returns directly via syscall_exit potentially
+ * clobbering static registers, so be sure to preserve them.
+ */
+save_static_function(sys_sysmips);
+
SYSCALL_DEFINE3(sysmips, long, cmd, long, arg1, long, arg2)
{
switch (cmd) {
diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c
index f806ee5..5eaf257 100644
--- a/arch/mips/kernel/unaligned.c
+++ b/arch/mips/kernel/unaligned.c
@@ -939,88 +939,114 @@
* The remaining opcodes are the ones that are really of
* interest.
*/
-#ifdef CONFIG_EVA
case spec3_op:
- /*
- * we can land here only from kernel accessing user memory,
- * so we need to "switch" the address limit to user space, so
- * address check can work properly.
- */
- seg = get_fs();
- set_fs(USER_DS);
- switch (insn.spec3_format.func) {
- case lhe_op:
- if (!access_ok(VERIFY_READ, addr, 2)) {
- set_fs(seg);
- goto sigbus;
+ if (insn.dsp_format.func == lx_op) {
+ switch (insn.dsp_format.op) {
+ case lwx_op:
+ if (!access_ok(VERIFY_READ, addr, 4))
+ goto sigbus;
+ LoadW(addr, value, res);
+ if (res)
+ goto fault;
+ compute_return_epc(regs);
+ regs->regs[insn.dsp_format.rd] = value;
+ break;
+ case lhx_op:
+ if (!access_ok(VERIFY_READ, addr, 2))
+ goto sigbus;
+ LoadHW(addr, value, res);
+ if (res)
+ goto fault;
+ compute_return_epc(regs);
+ regs->regs[insn.dsp_format.rd] = value;
+ break;
+ default:
+ goto sigill;
}
- LoadHWE(addr, value, res);
- if (res) {
- set_fs(seg);
- goto fault;
- }
- compute_return_epc(regs);
- regs->regs[insn.spec3_format.rt] = value;
- break;
- case lwe_op:
- if (!access_ok(VERIFY_READ, addr, 4)) {
- set_fs(seg);
- goto sigbus;
- }
- LoadWE(addr, value, res);
- if (res) {
- set_fs(seg);
- goto fault;
- }
- compute_return_epc(regs);
- regs->regs[insn.spec3_format.rt] = value;
- break;
- case lhue_op:
- if (!access_ok(VERIFY_READ, addr, 2)) {
- set_fs(seg);
- goto sigbus;
- }
- LoadHWUE(addr, value, res);
- if (res) {
- set_fs(seg);
- goto fault;
- }
- compute_return_epc(regs);
- regs->regs[insn.spec3_format.rt] = value;
- break;
- case she_op:
- if (!access_ok(VERIFY_WRITE, addr, 2)) {
- set_fs(seg);
- goto sigbus;
- }
- compute_return_epc(regs);
- value = regs->regs[insn.spec3_format.rt];
- StoreHWE(addr, value, res);
- if (res) {
- set_fs(seg);
- goto fault;
- }
- break;
- case swe_op:
- if (!access_ok(VERIFY_WRITE, addr, 4)) {
- set_fs(seg);
- goto sigbus;
- }
- compute_return_epc(regs);
- value = regs->regs[insn.spec3_format.rt];
- StoreWE(addr, value, res);
- if (res) {
- set_fs(seg);
- goto fault;
- }
- break;
- default:
- set_fs(seg);
- goto sigill;
}
- set_fs(seg);
- break;
+#ifdef CONFIG_EVA
+ else {
+ /*
+ * we can land here only from kernel accessing user
+ * memory, so we need to "switch" the address limit to
+ * user space, so that address check can work properly.
+ */
+ seg = get_fs();
+ set_fs(USER_DS);
+ switch (insn.spec3_format.func) {
+ case lhe_op:
+ if (!access_ok(VERIFY_READ, addr, 2)) {
+ set_fs(seg);
+ goto sigbus;
+ }
+ LoadHWE(addr, value, res);
+ if (res) {
+ set_fs(seg);
+ goto fault;
+ }
+ compute_return_epc(regs);
+ regs->regs[insn.spec3_format.rt] = value;
+ break;
+ case lwe_op:
+ if (!access_ok(VERIFY_READ, addr, 4)) {
+ set_fs(seg);
+ goto sigbus;
+ }
+ LoadWE(addr, value, res);
+ if (res) {
+ set_fs(seg);
+ goto fault;
+ }
+ compute_return_epc(regs);
+ regs->regs[insn.spec3_format.rt] = value;
+ break;
+ case lhue_op:
+ if (!access_ok(VERIFY_READ, addr, 2)) {
+ set_fs(seg);
+ goto sigbus;
+ }
+ LoadHWUE(addr, value, res);
+ if (res) {
+ set_fs(seg);
+ goto fault;
+ }
+ compute_return_epc(regs);
+ regs->regs[insn.spec3_format.rt] = value;
+ break;
+ case she_op:
+ if (!access_ok(VERIFY_WRITE, addr, 2)) {
+ set_fs(seg);
+ goto sigbus;
+ }
+ compute_return_epc(regs);
+ value = regs->regs[insn.spec3_format.rt];
+ StoreHWE(addr, value, res);
+ if (res) {
+ set_fs(seg);
+ goto fault;
+ }
+ break;
+ case swe_op:
+ if (!access_ok(VERIFY_WRITE, addr, 4)) {
+ set_fs(seg);
+ goto sigbus;
+ }
+ compute_return_epc(regs);
+ value = regs->regs[insn.spec3_format.rt];
+ StoreWE(addr, value, res);
+ if (res) {
+ set_fs(seg);
+ goto fault;
+ }
+ break;
+ default:
+ set_fs(seg);
+ goto sigill;
+ }
+ set_fs(seg);
+ }
#endif
+ break;
case lh_op:
if (!access_ok(VERIFY_READ, addr, 2))
goto sigbus;
@@ -1984,6 +2010,8 @@
u16 __user *pc16;
unsigned long origpc;
union mips16e_instruction mips16inst, oldinst;
+ unsigned int opcode;
+ int extended = 0;
origpc = regs->cp0_epc;
orig31 = regs->regs[31];
@@ -1996,6 +2024,7 @@
/* skip EXTEND instruction */
if (mips16inst.ri.opcode == MIPS16e_extend_op) {
+ extended = 1;
pc16++;
__get_user(mips16inst.full, pc16);
} else if (delay_slot(regs)) {
@@ -2008,7 +2037,8 @@
goto sigbus;
}
- switch (mips16inst.ri.opcode) {
+ opcode = mips16inst.ri.opcode;
+ switch (opcode) {
case MIPS16e_i64_op: /* I64 or RI64 instruction */
switch (mips16inst.i64.func) { /* I64/RI64 func field check */
case MIPS16e_ldpc_func:
@@ -2028,9 +2058,40 @@
goto sigbus;
case MIPS16e_swsp_op:
+ reg = reg16to32[mips16inst.ri.rx];
+ if (extended && cpu_has_mips16e2)
+ switch (mips16inst.ri.imm >> 5) {
+ case 0: /* SWSP */
+ case 1: /* SWGP */
+ break;
+ case 2: /* SHGP */
+ opcode = MIPS16e_sh_op;
+ break;
+ default:
+ goto sigbus;
+ }
+ break;
+
case MIPS16e_lwpc_op:
+ reg = reg16to32[mips16inst.ri.rx];
+ break;
+
case MIPS16e_lwsp_op:
reg = reg16to32[mips16inst.ri.rx];
+ if (extended && cpu_has_mips16e2)
+ switch (mips16inst.ri.imm >> 5) {
+ case 0: /* LWSP */
+ case 1: /* LWGP */
+ break;
+ case 2: /* LHGP */
+ opcode = MIPS16e_lh_op;
+ break;
+ case 4: /* LHUGP */
+ opcode = MIPS16e_lhu_op;
+ break;
+ default:
+ goto sigbus;
+ }
break;
case MIPS16e_i8_op:
@@ -2044,7 +2105,7 @@
break;
}
- switch (mips16inst.ri.opcode) {
+ switch (opcode) {
case MIPS16e_lb_op:
case MIPS16e_lbu_op:
diff --git a/arch/mips/lib/memcpy.S b/arch/mips/lib/memcpy.S
index 3114a2e..03e3304 100644
--- a/arch/mips/lib/memcpy.S
+++ b/arch/mips/lib/memcpy.S
@@ -28,6 +28,9 @@
#ifdef CONFIG_MIPS_MALTA
#undef CONFIG_CPU_HAS_PREFETCH
#endif
+#ifdef CONFIG_CPU_MIPSR6
+#undef CONFIG_CPU_HAS_PREFETCH
+#endif
#include <asm/asm.h>
#include <asm/asm-offsets.h>
diff --git a/arch/mips/loongson64/common/env.c b/arch/mips/loongson64/common/env.c
index 6afa218..1e8a955 100644
--- a/arch/mips/loongson64/common/env.c
+++ b/arch/mips/loongson64/common/env.c
@@ -90,7 +90,9 @@
cpu_clock_freq = ecpu->cpu_clock_freq;
loongson_sysconf.cputype = ecpu->cputype;
- if (ecpu->cputype == Loongson_3A) {
+ switch (ecpu->cputype) {
+ case Legacy_3A:
+ case Loongson_3A:
loongson_sysconf.cores_per_node = 4;
loongson_sysconf.cores_per_package = 4;
smp_group[0] = 0x900000003ff01000;
@@ -111,7 +113,9 @@
loongson_freqctrl[3] = 0x900030001fe001d0;
loongson_sysconf.ht_control_base = 0x90000EFDFB000000;
loongson_sysconf.workarounds = WORKAROUND_CPUFREQ;
- } else if (ecpu->cputype == Loongson_3B) {
+ break;
+ case Legacy_3B:
+ case Loongson_3B:
loongson_sysconf.cores_per_node = 4; /* One chip has 2 nodes */
loongson_sysconf.cores_per_package = 8;
smp_group[0] = 0x900000003ff01000;
@@ -132,7 +136,8 @@
loongson_freqctrl[3] = 0x900060001fe001d0;
loongson_sysconf.ht_control_base = 0x90001EFDFB000000;
loongson_sysconf.workarounds = WORKAROUND_CPUHOTPLUG;
- } else {
+ break;
+ default:
loongson_sysconf.cores_per_node = 1;
loongson_sysconf.cores_per_package = 1;
loongson_chipcfg[0] = 0x900000001fe00180;
@@ -193,6 +198,7 @@
break;
case PRID_REV_LOONGSON3A_R1:
case PRID_REV_LOONGSON3A_R2:
+ case PRID_REV_LOONGSON3A_R3:
cpu_clock_freq = 900000000;
break;
case PRID_REV_LOONGSON3B_R1:
diff --git a/arch/mips/loongson64/common/init.c b/arch/mips/loongson64/common/init.c
index 9b987fe..6ef1712 100644
--- a/arch/mips/loongson64/common/init.c
+++ b/arch/mips/loongson64/common/init.c
@@ -10,13 +10,25 @@
#include <linux/bootmem.h>
#include <asm/bootinfo.h>
+#include <asm/traps.h>
#include <asm/smp-ops.h>
+#include <asm/cacheflush.h>
#include <loongson.h>
/* Loongson CPU address windows config space base address */
unsigned long __maybe_unused _loongson_addrwincfg_base;
+static void __init mips_nmi_setup(void)
+{
+ void *base;
+ extern char except_vec_nmi;
+
+ base = (void *)(CAC_BASE + 0x380);
+ memcpy(base, &except_vec_nmi, 0x80);
+ flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
+}
+
void __init prom_init(void)
{
#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG
@@ -40,6 +52,7 @@
/*init the uart base address */
prom_init_uart_base();
register_smp_ops(&loongson3_smp_ops);
+ board_nmi_handler_setup = mips_nmi_setup;
}
void __init prom_free_prom_memory(void)
diff --git a/arch/mips/loongson64/loongson-3/irq.c b/arch/mips/loongson64/loongson-3/irq.c
index 548f759..7202e52 100644
--- a/arch/mips/loongson64/loongson-3/irq.c
+++ b/arch/mips/loongson64/loongson-3/irq.c
@@ -9,18 +9,69 @@
#include "smp.h"
+extern void loongson3_send_irq_by_ipi(int cpu, int irqs);
+
+unsigned int irq_cpu[16] = {[0 ... 15] = -1};
unsigned int ht_irq[] = {0, 1, 3, 4, 5, 6, 7, 8, 12, 14, 15};
+unsigned int local_irq = 1<<0 | 1<<1 | 1<<2 | 1<<7 | 1<<8 | 1<<12;
+
+int plat_set_irq_affinity(struct irq_data *d, const struct cpumask *affinity,
+ bool force)
+{
+ unsigned int cpu;
+ struct cpumask new_affinity;
+
+ /* I/O devices are connected on package-0 */
+ cpumask_copy(&new_affinity, affinity);
+ for_each_cpu(cpu, affinity)
+ if (cpu_data[cpu].package > 0)
+ cpumask_clear_cpu(cpu, &new_affinity);
+
+ if (cpumask_empty(&new_affinity))
+ return -EINVAL;
+
+ cpumask_copy(d->common->affinity, &new_affinity);
+
+ return IRQ_SET_MASK_OK_NOCOPY;
+}
static void ht_irqdispatch(void)
{
unsigned int i, irq;
+ struct irq_data *irqd;
+ struct cpumask affinity;
irq = LOONGSON_HT1_INT_VECTOR(0);
LOONGSON_HT1_INT_VECTOR(0) = irq; /* Acknowledge the IRQs */
for (i = 0; i < ARRAY_SIZE(ht_irq); i++) {
- if (irq & (0x1 << ht_irq[i]))
+ if (!(irq & (0x1 << ht_irq[i])))
+ continue;
+
+ /* handled by local core */
+ if (local_irq & (0x1 << ht_irq[i])) {
do_IRQ(ht_irq[i]);
+ continue;
+ }
+
+ irqd = irq_get_irq_data(ht_irq[i]);
+ cpumask_and(&affinity, irqd->common->affinity, cpu_active_mask);
+ if (cpumask_empty(&affinity)) {
+ do_IRQ(ht_irq[i]);
+ continue;
+ }
+
+ irq_cpu[ht_irq[i]] = cpumask_next(irq_cpu[ht_irq[i]], &affinity);
+ if (irq_cpu[ht_irq[i]] >= nr_cpu_ids)
+ irq_cpu[ht_irq[i]] = cpumask_first(&affinity);
+
+ if (irq_cpu[ht_irq[i]] == 0) {
+ do_IRQ(ht_irq[i]);
+ continue;
+ }
+
+ /* balanced by other cores */
+ loongson3_send_irq_by_ipi(irq_cpu[ht_irq[i]], (0x1 << ht_irq[i]));
}
}
@@ -120,11 +171,16 @@
void __init mach_init_irq(void)
{
+ struct irq_chip *chip;
+
clear_c0_status(ST0_IM | ST0_BEV);
irq_router_init();
mips_cpu_irq_init();
init_i8259_irqs();
+ chip = irq_get_chip(I8259A_IRQ_BASE);
+ chip->irq_set_affinity = plat_set_irq_affinity;
+
irq_set_chip_and_handler(LOONGSON_UART_IRQ,
&loongson_irq_chip, handle_level_irq);
diff --git a/arch/mips/loongson64/loongson-3/smp.c b/arch/mips/loongson64/loongson-3/smp.c
index 64659fc..b7a355c 100644
--- a/arch/mips/loongson64/loongson-3/smp.c
+++ b/arch/mips/loongson64/loongson-3/smp.c
@@ -254,13 +254,21 @@
loongson3_ipi_write32((u32)action, ipi_set0_regs[cpu_logical_map(i)]);
}
+#define IPI_IRQ_OFFSET 6
+
+void loongson3_send_irq_by_ipi(int cpu, int irqs)
+{
+ loongson3_ipi_write32(irqs << IPI_IRQ_OFFSET, ipi_set0_regs[cpu_logical_map(cpu)]);
+}
+
void loongson3_ipi_interrupt(struct pt_regs *regs)
{
int i, cpu = smp_processor_id();
- unsigned int action, c0count;
+ unsigned int action, c0count, irqs;
/* Load the ipi register to figure out what we're supposed to do */
action = loongson3_ipi_read32(ipi_status0_regs[cpu_logical_map(cpu)]);
+ irqs = action >> IPI_IRQ_OFFSET;
/* Clear the ipi register to clear the interrupt */
loongson3_ipi_write32((u32)action, ipi_clear0_regs[cpu_logical_map(cpu)]);
@@ -282,6 +290,14 @@
core0_c0count[i] = c0count;
__wbflush(); /* Let others see the result ASAP */
}
+
+ if (irqs) {
+ int irq;
+ while ((irq = ffs(irqs))) {
+ do_IRQ(irq-1);
+ irqs &= ~(1<<(irq-1));
+ }
+ }
}
#define MAX_LOOPS 800
@@ -503,7 +519,7 @@
: "a1");
}
-static void loongson3a_r2_play_dead(int *state_addr)
+static void loongson3a_r2r3_play_dead(int *state_addr)
{
register int val;
register long cpuid, core, node, count;
@@ -664,8 +680,9 @@
(void *)CKSEG1ADDR((unsigned long)loongson3a_r1_play_dead);
break;
case PRID_REV_LOONGSON3A_R2:
+ case PRID_REV_LOONGSON3A_R3:
play_dead_at_ckseg1 =
- (void *)CKSEG1ADDR((unsigned long)loongson3a_r2_play_dead);
+ (void *)CKSEG1ADDR((unsigned long)loongson3a_r2r3_play_dead);
break;
case PRID_REV_LOONGSON3B_R1:
case PRID_REV_LOONGSON3B_R2:
diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c
index f12fde1..f08a7b4 100644
--- a/arch/mips/math-emu/cp1emu.c
+++ b/arch/mips/math-emu/cp1emu.c
@@ -1142,7 +1142,7 @@
case mfhc_op:
if (!cpu_has_mips_r2_r6)
- goto sigill;
+ return SIGILL;
/* copregister rd -> gpr[rt] */
if (MIPSInst_RT(ir) != 0) {
@@ -1153,7 +1153,7 @@
case mthc_op:
if (!cpu_has_mips_r2_r6)
- goto sigill;
+ return SIGILL;
/* copregister rd <- gpr[rt] */
SITOHREG(xcp->regs[MIPSInst_RT(ir)], MIPSInst_RD(ir));
@@ -1376,7 +1376,6 @@
xcp->regs[MIPSInst_RS(ir)];
break;
default:
-sigill:
return SIGILL;
}
@@ -2524,6 +2523,35 @@
return 0;
}
+/*
+ * Emulate FPU instructions.
+ *
+ * If we use FPU hardware, then we have been typically called to handle
+ * an unimplemented operation, such as where an operand is a NaN or
+ * denormalized. In that case exit the emulation loop after a single
+ * iteration so as to let hardware execute any subsequent instructions.
+ *
+ * If we have no FPU hardware or it has been disabled, then continue
+ * emulating floating-point instructions until one of these conditions
+ * has occurred:
+ *
+ * - a non-FPU instruction has been encountered,
+ *
+ * - an attempt to emulate has ended with a signal,
+ *
+ * - the ISA mode has been switched.
+ *
+ * We need to terminate the emulation loop if we got switched to the
+ * MIPS16 mode, whether supported or not, so that we do not attempt
+ * to emulate a MIPS16 instruction as a regular MIPS FPU instruction.
+ * Similarly if we got switched to the microMIPS mode and only the
+ * regular MIPS mode is supported, so that we do not attempt to emulate
+ * a microMIPS instruction as a regular MIPS FPU instruction. Or if
+ * we got switched to the regular MIPS mode and only the microMIPS mode
+ * is supported, so that we do not attempt to emulate a regular MIPS
+ * instruction that should cause an Address Error exception instead.
+ * For simplicity we always terminate upon an ISA mode switch.
+ */
int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
int has_fpu, void *__user *fault_addr)
{
@@ -2609,6 +2637,15 @@
break;
if (sig)
break;
+ /*
+ * We have to check for the ISA bit explicitly here,
+ * because `get_isa16_mode' may return 0 if support
+ * for code compression has been globally disabled,
+ * or otherwise we may produce the wrong signal or
+ * even proceed successfully where we must not.
+ */
+ if ((xcp->cp0_epc ^ prevepc) & 0x1)
+ break;
cond_resched();
} while (xcp->cp0_epc > prevepc);
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 3fe99cb..81d6a15 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -1453,6 +1453,7 @@
case CPU_20KC:
case CPU_25KF:
case CPU_I6400:
+ case CPU_I6500:
case CPU_SB1:
case CPU_SB1A:
case CPU_XLR:
@@ -1512,6 +1513,7 @@
case CPU_ALCHEMY:
case CPU_I6400:
+ case CPU_I6500:
c->icache.flags |= MIPS_CACHE_IC_F_DC;
break;
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index e08598c..8e78251 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -232,7 +232,7 @@
else
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
- if (dma_mmap_from_coherent(dev, vma, cpu_addr, size, &ret))
+ if (dma_mmap_from_dev_coherent(dev, vma, cpu_addr, size, &ret))
return ret;
if (off < count && user_count <= (count - off)) {
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index ed1c529..5aadc69 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -153,8 +153,7 @@
*/
static int m4kc_tlbp_war(void)
{
- return (current_cpu_data.processor_id & 0xffff00) ==
- (PRID_COMP_MIPS | PRID_IMP_4KC);
+ return current_cpu_type() == CPU_4KC;
}
/* Handle labels (which must be positive integers). */
@@ -2015,6 +2014,26 @@
}
#endif /* CONFIG_MIPS_PGD_C0_CONTEXT */
+static bool cpu_has_tlbex_tlbp_race(void)
+{
+ /*
+ * When a Hardware Table Walker is running it can replace TLB entries
+ * at any time, leading to a race between it & the CPU.
+ */
+ if (cpu_has_htw)
+ return true;
+
+ /*
+ * If the CPU shares FTLB RAM with its siblings then our entry may be
+ * replaced at any time by a sibling performing a write to the FTLB.
+ */
+ if (cpu_has_shared_ftlb_ram)
+ return true;
+
+ /* In all other cases there ought to be no race condition to handle */
+ return false;
+}
+
/*
* R4000 style TLB load/store/modify handlers.
*/
@@ -2051,7 +2070,7 @@
iPTE_LW(p, wr.r1, wr.r2); /* get even pte */
if (!m4kc_tlbp_war()) {
build_tlb_probe_entry(p);
- if (cpu_has_htw) {
+ if (cpu_has_tlbex_tlbp_race()) {
/* race condition happens, leaving */
uasm_i_ehb(p);
uasm_i_mfc0(p, wr.r3, C0_INDEX);
@@ -2125,6 +2144,14 @@
}
uasm_i_nop(&p);
+ /*
+ * Warn if something may race with us & replace the TLB entry
+ * before we read it here. Everything with such races should
+ * also have dedicated RiXi exception handlers, so this
+ * shouldn't be hit.
+ */
+ WARN(cpu_has_tlbex_tlbp_race(), "Unhandled race in RiXi path");
+
uasm_i_tlbr(&p);
switch (current_cpu_type()) {
@@ -2192,6 +2219,14 @@
}
uasm_i_nop(&p);
+ /*
+ * Warn if something may race with us & replace the TLB entry
+ * before we read it here. Everything with such races should
+ * also have dedicated RiXi exception handlers, so this
+ * shouldn't be hit.
+ */
+ WARN(cpu_has_tlbex_tlbp_race(), "Unhandled race in RiXi path");
+
uasm_i_tlbr(&p);
switch (current_cpu_type()) {
diff --git a/arch/mips/mm/uasm-micromips.c b/arch/mips/mm/uasm-micromips.c
index 277cf52..c28ff53 100644
--- a/arch/mips/mm/uasm-micromips.c
+++ b/arch/mips/mm/uasm-micromips.c
@@ -40,93 +40,92 @@
#include "uasm.c"
-static struct insn insn_table_MM[] = {
- { insn_addu, M(mm_pool32a_op, 0, 0, 0, 0, mm_addu32_op), RT | RS | RD },
- { insn_addiu, M(mm_addiu32_op, 0, 0, 0, 0, 0), RT | RS | SIMM },
- { insn_and, M(mm_pool32a_op, 0, 0, 0, 0, mm_and_op), RT | RS | RD },
- { insn_andi, M(mm_andi32_op, 0, 0, 0, 0, 0), RT | RS | UIMM },
- { insn_beq, M(mm_beq32_op, 0, 0, 0, 0, 0), RS | RT | BIMM },
- { insn_beql, 0, 0 },
- { insn_bgez, M(mm_pool32i_op, mm_bgez_op, 0, 0, 0, 0), RS | BIMM },
- { insn_bgezl, 0, 0 },
- { insn_bltz, M(mm_pool32i_op, mm_bltz_op, 0, 0, 0, 0), RS | BIMM },
- { insn_bltzl, 0, 0 },
- { insn_bne, M(mm_bne32_op, 0, 0, 0, 0, 0), RT | RS | BIMM },
- { insn_cache, M(mm_pool32b_op, 0, 0, mm_cache_func, 0, 0), RT | RS | SIMM },
- { insn_cfc1, M(mm_pool32f_op, 0, 0, 0, mm_cfc1_op, mm_32f_73_op), RT | RS },
- { insn_cfcmsa, M(mm_pool32s_op, 0, msa_cfc_op, 0, 0, mm_32s_elm_op), RD | RE },
- { insn_ctc1, M(mm_pool32f_op, 0, 0, 0, mm_ctc1_op, mm_32f_73_op), RT | RS },
- { insn_ctcmsa, M(mm_pool32s_op, 0, msa_ctc_op, 0, 0, mm_32s_elm_op), RD | RE },
- { insn_daddu, 0, 0 },
- { insn_daddiu, 0, 0 },
- { insn_di, M(mm_pool32a_op, 0, 0, 0, mm_di_op, mm_pool32axf_op), RS },
- { insn_divu, M(mm_pool32a_op, 0, 0, 0, mm_divu_op, mm_pool32axf_op), RT | RS },
- { insn_dmfc0, 0, 0 },
- { insn_dmtc0, 0, 0 },
- { insn_dsll, 0, 0 },
- { insn_dsll32, 0, 0 },
- { insn_dsra, 0, 0 },
- { insn_dsrl, 0, 0 },
- { insn_dsrl32, 0, 0 },
- { insn_drotr, 0, 0 },
- { insn_drotr32, 0, 0 },
- { insn_dsubu, 0, 0 },
- { insn_eret, M(mm_pool32a_op, 0, 0, 0, mm_eret_op, mm_pool32axf_op), 0 },
- { insn_ins, M(mm_pool32a_op, 0, 0, 0, 0, mm_ins_op), RT | RS | RD | RE },
- { insn_ext, M(mm_pool32a_op, 0, 0, 0, 0, mm_ext_op), RT | RS | RD | RE },
- { insn_j, M(mm_j32_op, 0, 0, 0, 0, 0), JIMM },
- { insn_jal, M(mm_jal32_op, 0, 0, 0, 0, 0), JIMM },
- { insn_jalr, M(mm_pool32a_op, 0, 0, 0, mm_jalr_op, mm_pool32axf_op), RT | RS },
- { insn_jr, M(mm_pool32a_op, 0, 0, 0, mm_jalr_op, mm_pool32axf_op), RS },
- { insn_lb, M(mm_lb32_op, 0, 0, 0, 0, 0), RT | RS | SIMM },
- { insn_ld, 0, 0 },
- { insn_lh, M(mm_lh32_op, 0, 0, 0, 0, 0), RS | RS | SIMM },
- { insn_ll, M(mm_pool32c_op, 0, 0, (mm_ll_func << 1), 0, 0), RS | RT | SIMM },
- { insn_lld, 0, 0 },
- { insn_lui, M(mm_pool32i_op, mm_lui_op, 0, 0, 0, 0), RS | SIMM },
- { insn_lw, M(mm_lw32_op, 0, 0, 0, 0, 0), RT | RS | SIMM },
- { insn_mfc0, M(mm_pool32a_op, 0, 0, 0, mm_mfc0_op, mm_pool32axf_op), RT | RS | RD },
- { insn_mfhi, M(mm_pool32a_op, 0, 0, 0, mm_mfhi32_op, mm_pool32axf_op), RS },
- { insn_mflo, M(mm_pool32a_op, 0, 0, 0, mm_mflo32_op, mm_pool32axf_op), RS },
- { insn_mtc0, M(mm_pool32a_op, 0, 0, 0, mm_mtc0_op, mm_pool32axf_op), RT | RS | RD },
- { insn_mthi, M(mm_pool32a_op, 0, 0, 0, mm_mthi32_op, mm_pool32axf_op), RS },
- { insn_mtlo, M(mm_pool32a_op, 0, 0, 0, mm_mtlo32_op, mm_pool32axf_op), RS },
- { insn_mul, M(mm_pool32a_op, 0, 0, 0, 0, mm_mul_op), RT | RS | RD },
- { insn_or, M(mm_pool32a_op, 0, 0, 0, 0, mm_or32_op), RT | RS | RD },
- { insn_ori, M(mm_ori32_op, 0, 0, 0, 0, 0), RT | RS | UIMM },
- { insn_pref, M(mm_pool32c_op, 0, 0, (mm_pref_func << 1), 0, 0), RT | RS | SIMM },
- { insn_rfe, 0, 0 },
- { insn_sc, M(mm_pool32c_op, 0, 0, (mm_sc_func << 1), 0, 0), RT | RS | SIMM },
- { insn_scd, 0, 0 },
- { insn_sd, 0, 0 },
- { insn_sll, M(mm_pool32a_op, 0, 0, 0, 0, mm_sll32_op), RT | RS | RD },
- { insn_sllv, M(mm_pool32a_op, 0, 0, 0, 0, mm_sllv32_op), RT | RS | RD },
- { insn_slt, M(mm_pool32a_op, 0, 0, 0, 0, mm_slt_op), RT | RS | RD },
- { insn_sltiu, M(mm_sltiu32_op, 0, 0, 0, 0, 0), RT | RS | SIMM },
- { insn_sltu, M(mm_pool32a_op, 0, 0, 0, 0, mm_sltu_op), RT | RS | RD },
- { insn_sra, M(mm_pool32a_op, 0, 0, 0, 0, mm_sra_op), RT | RS | RD },
- { insn_srl, M(mm_pool32a_op, 0, 0, 0, 0, mm_srl32_op), RT | RS | RD },
- { insn_srlv, M(mm_pool32a_op, 0, 0, 0, 0, mm_srlv32_op), RT | RS | RD },
- { insn_rotr, M(mm_pool32a_op, 0, 0, 0, 0, mm_rotr_op), RT | RS | RD },
- { insn_subu, M(mm_pool32a_op, 0, 0, 0, 0, mm_subu32_op), RT | RS | RD },
- { insn_sw, M(mm_sw32_op, 0, 0, 0, 0, 0), RT | RS | SIMM },
- { insn_sync, M(mm_pool32a_op, 0, 0, 0, mm_sync_op, mm_pool32axf_op), RS },
- { insn_tlbp, M(mm_pool32a_op, 0, 0, 0, mm_tlbp_op, mm_pool32axf_op), 0 },
- { insn_tlbr, M(mm_pool32a_op, 0, 0, 0, mm_tlbr_op, mm_pool32axf_op), 0 },
- { insn_tlbwi, M(mm_pool32a_op, 0, 0, 0, mm_tlbwi_op, mm_pool32axf_op), 0 },
- { insn_tlbwr, M(mm_pool32a_op, 0, 0, 0, mm_tlbwr_op, mm_pool32axf_op), 0 },
- { insn_wait, M(mm_pool32a_op, 0, 0, 0, mm_wait_op, mm_pool32axf_op), SCIMM },
- { insn_wsbh, M(mm_pool32a_op, 0, 0, 0, mm_wsbh_op, mm_pool32axf_op), RT | RS },
- { insn_xor, M(mm_pool32a_op, 0, 0, 0, 0, mm_xor32_op), RT | RS | RD },
- { insn_xori, M(mm_xori32_op, 0, 0, 0, 0, 0), RT | RS | UIMM },
- { insn_dins, 0, 0 },
- { insn_dinsm, 0, 0 },
- { insn_syscall, M(mm_pool32a_op, 0, 0, 0, mm_syscall_op, mm_pool32axf_op), SCIMM},
- { insn_bbit0, 0, 0 },
- { insn_bbit1, 0, 0 },
- { insn_lwx, 0, 0 },
- { insn_ldx, 0, 0 },
- { insn_invalid, 0, 0 }
+static const struct insn const insn_table_MM[insn_invalid] = {
+ [insn_addu] = {M(mm_pool32a_op, 0, 0, 0, 0, mm_addu32_op), RT | RS | RD},
+ [insn_addiu] = {M(mm_addiu32_op, 0, 0, 0, 0, 0), RT | RS | SIMM},
+ [insn_and] = {M(mm_pool32a_op, 0, 0, 0, 0, mm_and_op), RT | RS | RD},
+ [insn_andi] = {M(mm_andi32_op, 0, 0, 0, 0, 0), RT | RS | UIMM},
+ [insn_beq] = {M(mm_beq32_op, 0, 0, 0, 0, 0), RS | RT | BIMM},
+ [insn_beql] = {0, 0},
+ [insn_bgez] = {M(mm_pool32i_op, mm_bgez_op, 0, 0, 0, 0), RS | BIMM},
+ [insn_bgezl] = {0, 0},
+ [insn_bltz] = {M(mm_pool32i_op, mm_bltz_op, 0, 0, 0, 0), RS | BIMM},
+ [insn_bltzl] = {0, 0},
+ [insn_bne] = {M(mm_bne32_op, 0, 0, 0, 0, 0), RT | RS | BIMM},
+ [insn_cache] = {M(mm_pool32b_op, 0, 0, mm_cache_func, 0, 0), RT | RS | SIMM},
+ [insn_cfc1] = {M(mm_pool32f_op, 0, 0, 0, mm_cfc1_op, mm_32f_73_op), RT | RS},
+ [insn_cfcmsa] = {M(mm_pool32s_op, 0, msa_cfc_op, 0, 0, mm_32s_elm_op), RD | RE},
+ [insn_ctc1] = {M(mm_pool32f_op, 0, 0, 0, mm_ctc1_op, mm_32f_73_op), RT | RS},
+ [insn_ctcmsa] = {M(mm_pool32s_op, 0, msa_ctc_op, 0, 0, mm_32s_elm_op), RD | RE},
+ [insn_daddu] = {0, 0},
+ [insn_daddiu] = {0, 0},
+ [insn_di] = {M(mm_pool32a_op, 0, 0, 0, mm_di_op, mm_pool32axf_op), RS},
+ [insn_divu] = {M(mm_pool32a_op, 0, 0, 0, mm_divu_op, mm_pool32axf_op), RT | RS},
+ [insn_dmfc0] = {0, 0},
+ [insn_dmtc0] = {0, 0},
+ [insn_dsll] = {0, 0},
+ [insn_dsll32] = {0, 0},
+ [insn_dsra] = {0, 0},
+ [insn_dsrl] = {0, 0},
+ [insn_dsrl32] = {0, 0},
+ [insn_drotr] = {0, 0},
+ [insn_drotr32] = {0, 0},
+ [insn_dsubu] = {0, 0},
+ [insn_eret] = {M(mm_pool32a_op, 0, 0, 0, mm_eret_op, mm_pool32axf_op), 0},
+ [insn_ins] = {M(mm_pool32a_op, 0, 0, 0, 0, mm_ins_op), RT | RS | RD | RE},
+ [insn_ext] = {M(mm_pool32a_op, 0, 0, 0, 0, mm_ext_op), RT | RS | RD | RE},
+ [insn_j] = {M(mm_j32_op, 0, 0, 0, 0, 0), JIMM},
+ [insn_jal] = {M(mm_jal32_op, 0, 0, 0, 0, 0), JIMM},
+ [insn_jalr] = {M(mm_pool32a_op, 0, 0, 0, mm_jalr_op, mm_pool32axf_op), RT | RS},
+ [insn_jr] = {M(mm_pool32a_op, 0, 0, 0, mm_jalr_op, mm_pool32axf_op), RS},
+ [insn_lb] = {M(mm_lb32_op, 0, 0, 0, 0, 0), RT | RS | SIMM},
+ [insn_ld] = {0, 0},
+ [insn_lh] = {M(mm_lh32_op, 0, 0, 0, 0, 0), RS | RS | SIMM},
+ [insn_ll] = {M(mm_pool32c_op, 0, 0, (mm_ll_func << 1), 0, 0), RS | RT | SIMM},
+ [insn_lld] = {0, 0},
+ [insn_lui] = {M(mm_pool32i_op, mm_lui_op, 0, 0, 0, 0), RS | SIMM},
+ [insn_lw] = {M(mm_lw32_op, 0, 0, 0, 0, 0), RT | RS | SIMM},
+ [insn_mfc0] = {M(mm_pool32a_op, 0, 0, 0, mm_mfc0_op, mm_pool32axf_op), RT | RS | RD},
+ [insn_mfhi] = {M(mm_pool32a_op, 0, 0, 0, mm_mfhi32_op, mm_pool32axf_op), RS},
+ [insn_mflo] = {M(mm_pool32a_op, 0, 0, 0, mm_mflo32_op, mm_pool32axf_op), RS},
+ [insn_mtc0] = {M(mm_pool32a_op, 0, 0, 0, mm_mtc0_op, mm_pool32axf_op), RT | RS | RD},
+ [insn_mthi] = {M(mm_pool32a_op, 0, 0, 0, mm_mthi32_op, mm_pool32axf_op), RS},
+ [insn_mtlo] = {M(mm_pool32a_op, 0, 0, 0, mm_mtlo32_op, mm_pool32axf_op), RS},
+ [insn_mul] = {M(mm_pool32a_op, 0, 0, 0, 0, mm_mul_op), RT | RS | RD},
+ [insn_or] = {M(mm_pool32a_op, 0, 0, 0, 0, mm_or32_op), RT | RS | RD},
+ [insn_ori] = {M(mm_ori32_op, 0, 0, 0, 0, 0), RT | RS | UIMM},
+ [insn_pref] = {M(mm_pool32c_op, 0, 0, (mm_pref_func << 1), 0, 0), RT | RS | SIMM},
+ [insn_rfe] = {0, 0},
+ [insn_sc] = {M(mm_pool32c_op, 0, 0, (mm_sc_func << 1), 0, 0), RT | RS | SIMM},
+ [insn_scd] = {0, 0},
+ [insn_sd] = {0, 0},
+ [insn_sll] = {M(mm_pool32a_op, 0, 0, 0, 0, mm_sll32_op), RT | RS | RD},
+ [insn_sllv] = {M(mm_pool32a_op, 0, 0, 0, 0, mm_sllv32_op), RT | RS | RD},
+ [insn_slt] = {M(mm_pool32a_op, 0, 0, 0, 0, mm_slt_op), RT | RS | RD},
+ [insn_sltiu] = {M(mm_sltiu32_op, 0, 0, 0, 0, 0), RT | RS | SIMM},
+ [insn_sltu] = {M(mm_pool32a_op, 0, 0, 0, 0, mm_sltu_op), RT | RS | RD},
+ [insn_sra] = {M(mm_pool32a_op, 0, 0, 0, 0, mm_sra_op), RT | RS | RD},
+ [insn_srl] = {M(mm_pool32a_op, 0, 0, 0, 0, mm_srl32_op), RT | RS | RD},
+ [insn_srlv] = {M(mm_pool32a_op, 0, 0, 0, 0, mm_srlv32_op), RT | RS | RD},
+ [insn_rotr] = {M(mm_pool32a_op, 0, 0, 0, 0, mm_rotr_op), RT | RS | RD},
+ [insn_subu] = {M(mm_pool32a_op, 0, 0, 0, 0, mm_subu32_op), RT | RS | RD},
+ [insn_sw] = {M(mm_sw32_op, 0, 0, 0, 0, 0), RT | RS | SIMM},
+ [insn_sync] = {M(mm_pool32a_op, 0, 0, 0, mm_sync_op, mm_pool32axf_op), RS},
+ [insn_tlbp] = {M(mm_pool32a_op, 0, 0, 0, mm_tlbp_op, mm_pool32axf_op), 0},
+ [insn_tlbr] = {M(mm_pool32a_op, 0, 0, 0, mm_tlbr_op, mm_pool32axf_op), 0},
+ [insn_tlbwi] = {M(mm_pool32a_op, 0, 0, 0, mm_tlbwi_op, mm_pool32axf_op), 0},
+ [insn_tlbwr] = {M(mm_pool32a_op, 0, 0, 0, mm_tlbwr_op, mm_pool32axf_op), 0},
+ [insn_wait] = {M(mm_pool32a_op, 0, 0, 0, mm_wait_op, mm_pool32axf_op), SCIMM},
+ [insn_wsbh] = {M(mm_pool32a_op, 0, 0, 0, mm_wsbh_op, mm_pool32axf_op), RT | RS},
+ [insn_xor] = {M(mm_pool32a_op, 0, 0, 0, 0, mm_xor32_op), RT | RS | RD},
+ [insn_xori] = {M(mm_xori32_op, 0, 0, 0, 0, 0), RT | RS | UIMM},
+ [insn_dins] = {0, 0},
+ [insn_dinsm] = {0, 0},
+ [insn_syscall] = {M(mm_pool32a_op, 0, 0, 0, mm_syscall_op, mm_pool32axf_op), SCIMM},
+ [insn_bbit0] = {0, 0},
+ [insn_bbit1] = {0, 0},
+ [insn_lwx] = {0, 0},
+ [insn_ldx] = {0, 0},
};
#undef M
@@ -156,20 +155,17 @@
*/
static void build_insn(u32 **buf, enum opcode opc, ...)
{
- struct insn *ip = NULL;
- unsigned int i;
+ const struct insn *ip;
va_list ap;
u32 op;
- for (i = 0; insn_table_MM[i].opcode != insn_invalid; i++)
- if (insn_table_MM[i].opcode == opc) {
- ip = &insn_table_MM[i];
- break;
- }
-
- if (!ip || (opc == insn_daddiu && r4k_daddiu_bug()))
+ if (opc < 0 || opc >= insn_invalid ||
+ (opc == insn_daddiu && r4k_daddiu_bug()) ||
+ (insn_table_MM[opc].match == 0 && insn_table_MM[opc].fields == 0))
panic("Unsupported Micro-assembler instruction %d", opc);
+ ip = &insn_table_MM[opc];
+
op = ip->match;
va_start(ap, opc);
if (ip->fields & RS) {
diff --git a/arch/mips/mm/uasm-mips.c b/arch/mips/mm/uasm-mips.c
index 2277499..3f74f6c 100644
--- a/arch/mips/mm/uasm-mips.c
+++ b/arch/mips/mm/uasm-mips.c
@@ -48,126 +48,145 @@
#include "uasm.c"
-static struct insn insn_table[] = {
- { insn_addiu, M(addiu_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
- { insn_addu, M(spec_op, 0, 0, 0, 0, addu_op), RS | RT | RD },
- { insn_andi, M(andi_op, 0, 0, 0, 0, 0), RS | RT | UIMM },
- { insn_and, M(spec_op, 0, 0, 0, 0, and_op), RS | RT | RD },
- { insn_bbit0, M(lwc2_op, 0, 0, 0, 0, 0), RS | RT | BIMM },
- { insn_bbit1, M(swc2_op, 0, 0, 0, 0, 0), RS | RT | BIMM },
- { insn_beql, M(beql_op, 0, 0, 0, 0, 0), RS | RT | BIMM },
- { insn_beq, M(beq_op, 0, 0, 0, 0, 0), RS | RT | BIMM },
- { insn_bgezl, M(bcond_op, 0, bgezl_op, 0, 0, 0), RS | BIMM },
- { insn_bgez, M(bcond_op, 0, bgez_op, 0, 0, 0), RS | BIMM },
- { insn_bltzl, M(bcond_op, 0, bltzl_op, 0, 0, 0), RS | BIMM },
- { insn_bltz, M(bcond_op, 0, bltz_op, 0, 0, 0), RS | BIMM },
- { insn_bne, M(bne_op, 0, 0, 0, 0, 0), RS | RT | BIMM },
+static const struct insn const insn_table[insn_invalid] = {
+ [insn_addiu] = {M(addiu_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
+ [insn_addu] = {M(spec_op, 0, 0, 0, 0, addu_op), RS | RT | RD},
+ [insn_and] = {M(spec_op, 0, 0, 0, 0, and_op), RS | RT | RD},
+ [insn_andi] = {M(andi_op, 0, 0, 0, 0, 0), RS | RT | UIMM},
+ [insn_bbit0] = {M(lwc2_op, 0, 0, 0, 0, 0), RS | RT | BIMM},
+ [insn_bbit1] = {M(swc2_op, 0, 0, 0, 0, 0), RS | RT | BIMM},
+ [insn_beq] = {M(beq_op, 0, 0, 0, 0, 0), RS | RT | BIMM},
+ [insn_beql] = {M(beql_op, 0, 0, 0, 0, 0), RS | RT | BIMM},
+ [insn_bgez] = {M(bcond_op, 0, bgez_op, 0, 0, 0), RS | BIMM},
+ [insn_bgezl] = {M(bcond_op, 0, bgezl_op, 0, 0, 0), RS | BIMM},
+ [insn_bgtz] = {M(bgtz_op, 0, 0, 0, 0, 0), RS | BIMM},
+ [insn_blez] = {M(blez_op, 0, 0, 0, 0, 0), RS | BIMM},
+ [insn_bltz] = {M(bcond_op, 0, bltz_op, 0, 0, 0), RS | BIMM},
+ [insn_bltzl] = {M(bcond_op, 0, bltzl_op, 0, 0, 0), RS | BIMM},
+ [insn_bne] = {M(bne_op, 0, 0, 0, 0, 0), RS | RT | BIMM},
+ [insn_break] = {M(spec_op, 0, 0, 0, 0, break_op), SCIMM},
#ifndef CONFIG_CPU_MIPSR6
- { insn_cache, M(cache_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
+ [insn_cache] = {M(cache_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
#else
- { insn_cache, M6(spec3_op, 0, 0, 0, cache6_op), RS | RT | SIMM9 },
+ [insn_cache] = {M6(spec3_op, 0, 0, 0, cache6_op), RS | RT | SIMM9},
#endif
- { insn_cfc1, M(cop1_op, cfc_op, 0, 0, 0, 0), RT | RD },
- { insn_cfcmsa, M(msa_op, 0, msa_cfc_op, 0, 0, msa_elm_op), RD | RE },
- { insn_ctc1, M(cop1_op, ctc_op, 0, 0, 0, 0), RT | RD },
- { insn_ctcmsa, M(msa_op, 0, msa_ctc_op, 0, 0, msa_elm_op), RD | RE },
- { insn_daddiu, M(daddiu_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
- { insn_daddu, M(spec_op, 0, 0, 0, 0, daddu_op), RS | RT | RD },
- { insn_dinsm, M(spec3_op, 0, 0, 0, 0, dinsm_op), RS | RT | RD | RE },
- { insn_di, M(cop0_op, mfmc0_op, 0, 12, 0, 0), RT },
- { insn_dins, M(spec3_op, 0, 0, 0, 0, dins_op), RS | RT | RD | RE },
- { insn_divu, M(spec_op, 0, 0, 0, 0, divu_op), RS | RT },
- { insn_dmfc0, M(cop0_op, dmfc_op, 0, 0, 0, 0), RT | RD | SET},
- { insn_dmtc0, M(cop0_op, dmtc_op, 0, 0, 0, 0), RT | RD | SET},
- { insn_drotr32, M(spec_op, 1, 0, 0, 0, dsrl32_op), RT | RD | RE },
- { insn_drotr, M(spec_op, 1, 0, 0, 0, dsrl_op), RT | RD | RE },
- { insn_dsll32, M(spec_op, 0, 0, 0, 0, dsll32_op), RT | RD | RE },
- { insn_dsll, M(spec_op, 0, 0, 0, 0, dsll_op), RT | RD | RE },
- { insn_dsra, M(spec_op, 0, 0, 0, 0, dsra_op), RT | RD | RE },
- { insn_dsrl32, M(spec_op, 0, 0, 0, 0, dsrl32_op), RT | RD | RE },
- { insn_dsrl, M(spec_op, 0, 0, 0, 0, dsrl_op), RT | RD | RE },
- { insn_dsubu, M(spec_op, 0, 0, 0, 0, dsubu_op), RS | RT | RD },
- { insn_eret, M(cop0_op, cop_op, 0, 0, 0, eret_op), 0 },
- { insn_ext, M(spec3_op, 0, 0, 0, 0, ext_op), RS | RT | RD | RE },
- { insn_ins, M(spec3_op, 0, 0, 0, 0, ins_op), RS | RT | RD | RE },
- { insn_j, M(j_op, 0, 0, 0, 0, 0), JIMM },
- { insn_jal, M(jal_op, 0, 0, 0, 0, 0), JIMM },
- { insn_jalr, M(spec_op, 0, 0, 0, 0, jalr_op), RS | RD },
- { insn_j, M(j_op, 0, 0, 0, 0, 0), JIMM },
+ [insn_cfc1] = {M(cop1_op, cfc_op, 0, 0, 0, 0), RT | RD},
+ [insn_cfcmsa] = {M(msa_op, 0, msa_cfc_op, 0, 0, msa_elm_op), RD | RE},
+ [insn_ctc1] = {M(cop1_op, ctc_op, 0, 0, 0, 0), RT | RD},
+ [insn_ctcmsa] = {M(msa_op, 0, msa_ctc_op, 0, 0, msa_elm_op), RD | RE},
+ [insn_daddiu] = {M(daddiu_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
+ [insn_daddu] = {M(spec_op, 0, 0, 0, 0, daddu_op), RS | RT | RD},
+ [insn_ddivu] = {M(spec_op, 0, 0, 0, 0, ddivu_op), RS | RT},
+ [insn_di] = {M(cop0_op, mfmc0_op, 0, 12, 0, 0), RT},
+ [insn_dins] = {M(spec3_op, 0, 0, 0, 0, dins_op), RS | RT | RD | RE},
+ [insn_dinsm] = {M(spec3_op, 0, 0, 0, 0, dinsm_op), RS | RT | RD | RE},
+ [insn_dinsu] = {M(spec3_op, 0, 0, 0, 0, dinsu_op), RS | RT | RD | RE},
+ [insn_divu] = {M(spec_op, 0, 0, 0, 0, divu_op), RS | RT},
+ [insn_dmfc0] = {M(cop0_op, dmfc_op, 0, 0, 0, 0), RT | RD | SET},
+ [insn_dmtc0] = {M(cop0_op, dmtc_op, 0, 0, 0, 0), RT | RD | SET},
+ [insn_dmultu] = {M(spec_op, 0, 0, 0, 0, dmultu_op), RS | RT},
+ [insn_drotr] = {M(spec_op, 1, 0, 0, 0, dsrl_op), RT | RD | RE},
+ [insn_drotr32] = {M(spec_op, 1, 0, 0, 0, dsrl32_op), RT | RD | RE},
+ [insn_dsbh] = {M(spec3_op, 0, 0, 0, dsbh_op, dbshfl_op), RT | RD},
+ [insn_dshd] = {M(spec3_op, 0, 0, 0, dshd_op, dbshfl_op), RT | RD},
+ [insn_dsll] = {M(spec_op, 0, 0, 0, 0, dsll_op), RT | RD | RE},
+ [insn_dsll32] = {M(spec_op, 0, 0, 0, 0, dsll32_op), RT | RD | RE},
+ [insn_dsllv] = {M(spec_op, 0, 0, 0, 0, dsllv_op), RS | RT | RD},
+ [insn_dsra] = {M(spec_op, 0, 0, 0, 0, dsra_op), RT | RD | RE},
+ [insn_dsra32] = {M(spec_op, 0, 0, 0, 0, dsra32_op), RT | RD | RE},
+ [insn_dsrav] = {M(spec_op, 0, 0, 0, 0, dsrav_op), RS | RT | RD},
+ [insn_dsrl] = {M(spec_op, 0, 0, 0, 0, dsrl_op), RT | RD | RE},
+ [insn_dsrl32] = {M(spec_op, 0, 0, 0, 0, dsrl32_op), RT | RD | RE},
+ [insn_dsrlv] = {M(spec_op, 0, 0, 0, 0, dsrlv_op), RS | RT | RD},
+ [insn_dsubu] = {M(spec_op, 0, 0, 0, 0, dsubu_op), RS | RT | RD},
+ [insn_eret] = {M(cop0_op, cop_op, 0, 0, 0, eret_op), 0},
+ [insn_ext] = {M(spec3_op, 0, 0, 0, 0, ext_op), RS | RT | RD | RE},
+ [insn_ins] = {M(spec3_op, 0, 0, 0, 0, ins_op), RS | RT | RD | RE},
+ [insn_j] = {M(j_op, 0, 0, 0, 0, 0), JIMM},
+ [insn_jal] = {M(jal_op, 0, 0, 0, 0, 0), JIMM},
+ [insn_jalr] = {M(spec_op, 0, 0, 0, 0, jalr_op), RS | RD},
#ifndef CONFIG_CPU_MIPSR6
- { insn_jr, M(spec_op, 0, 0, 0, 0, jr_op), RS },
+ [insn_jr] = {M(spec_op, 0, 0, 0, 0, jr_op), RS},
#else
- { insn_jr, M(spec_op, 0, 0, 0, 0, jalr_op), RS },
+ [insn_jr] = {M(spec_op, 0, 0, 0, 0, jalr_op), RS},
#endif
- { insn_lb, M(lb_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
- { insn_ld, M(ld_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
- { insn_ldx, M(spec3_op, 0, 0, 0, ldx_op, lx_op), RS | RT | RD },
- { insn_lh, M(lh_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
- { insn_lhu, M(lhu_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
+ [insn_lb] = {M(lb_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
+ [insn_lbu] = {M(lbu_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
+ [insn_ld] = {M(ld_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
+ [insn_lddir] = {M(lwc2_op, 0, 0, 0, lddir_op, mult_op), RS | RT | RD},
+ [insn_ldpte] = {M(lwc2_op, 0, 0, 0, ldpte_op, mult_op), RS | RD},
+ [insn_ldx] = {M(spec3_op, 0, 0, 0, ldx_op, lx_op), RS | RT | RD},
+ [insn_lh] = {M(lh_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
+ [insn_lhu] = {M(lhu_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
#ifndef CONFIG_CPU_MIPSR6
- { insn_lld, M(lld_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
- { insn_ll, M(ll_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
+ [insn_ll] = {M(ll_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
+ [insn_lld] = {M(lld_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
#else
- { insn_lld, M6(spec3_op, 0, 0, 0, lld6_op), RS | RT | SIMM9 },
- { insn_ll, M6(spec3_op, 0, 0, 0, ll6_op), RS | RT | SIMM9 },
+ [insn_ll] = {M6(spec3_op, 0, 0, 0, ll6_op), RS | RT | SIMM9},
+ [insn_lld] = {M6(spec3_op, 0, 0, 0, lld6_op), RS | RT | SIMM9},
#endif
- { insn_lui, M(lui_op, 0, 0, 0, 0, 0), RT | SIMM },
- { insn_lw, M(lw_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
- { insn_lwx, M(spec3_op, 0, 0, 0, lwx_op, lx_op), RS | RT | RD },
- { insn_mfc0, M(cop0_op, mfc_op, 0, 0, 0, 0), RT | RD | SET},
- { insn_mfhc0, M(cop0_op, mfhc0_op, 0, 0, 0, 0), RT | RD | SET},
- { insn_mfhi, M(spec_op, 0, 0, 0, 0, mfhi_op), RD },
- { insn_mflo, M(spec_op, 0, 0, 0, 0, mflo_op), RD },
- { insn_mtc0, M(cop0_op, mtc_op, 0, 0, 0, 0), RT | RD | SET},
- { insn_mthc0, M(cop0_op, mthc0_op, 0, 0, 0, 0), RT | RD | SET},
- { insn_mthi, M(spec_op, 0, 0, 0, 0, mthi_op), RS },
- { insn_mtlo, M(spec_op, 0, 0, 0, 0, mtlo_op), RS },
+ [insn_lui] = {M(lui_op, 0, 0, 0, 0, 0), RT | SIMM},
+ [insn_lw] = {M(lw_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
+ [insn_lwu] = {M(lwu_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
+ [insn_lwx] = {M(spec3_op, 0, 0, 0, lwx_op, lx_op), RS | RT | RD},
+ [insn_mfc0] = {M(cop0_op, mfc_op, 0, 0, 0, 0), RT | RD | SET},
+ [insn_mfhc0] = {M(cop0_op, mfhc0_op, 0, 0, 0, 0), RT | RD | SET},
+ [insn_mfhi] = {M(spec_op, 0, 0, 0, 0, mfhi_op), RD},
+ [insn_mflo] = {M(spec_op, 0, 0, 0, 0, mflo_op), RD},
+ [insn_movn] = {M(spec_op, 0, 0, 0, 0, movn_op), RS | RT | RD},
+ [insn_movz] = {M(spec_op, 0, 0, 0, 0, movz_op), RS | RT | RD},
+ [insn_mtc0] = {M(cop0_op, mtc_op, 0, 0, 0, 0), RT | RD | SET},
+ [insn_mthc0] = {M(cop0_op, mthc0_op, 0, 0, 0, 0), RT | RD | SET},
+ [insn_mthi] = {M(spec_op, 0, 0, 0, 0, mthi_op), RS},
+ [insn_mtlo] = {M(spec_op, 0, 0, 0, 0, mtlo_op), RS},
#ifndef CONFIG_CPU_MIPSR6
- { insn_mul, M(spec2_op, 0, 0, 0, 0, mul_op), RS | RT | RD},
+ [insn_mul] = {M(spec2_op, 0, 0, 0, 0, mul_op), RS | RT | RD},
#else
- { insn_mul, M(spec_op, 0, 0, 0, mult_mul_op, mult_op), RS | RT | RD},
+ [insn_mul] = {M(spec_op, 0, 0, 0, mult_mul_op, mult_op), RS | RT | RD},
#endif
- { insn_ori, M(ori_op, 0, 0, 0, 0, 0), RS | RT | UIMM },
- { insn_or, M(spec_op, 0, 0, 0, 0, or_op), RS | RT | RD },
+ [insn_multu] = {M(spec_op, 0, 0, 0, 0, multu_op), RS | RT},
+ [insn_nor] = {M(spec_op, 0, 0, 0, 0, nor_op), RS | RT | RD},
+ [insn_or] = {M(spec_op, 0, 0, 0, 0, or_op), RS | RT | RD},
+ [insn_ori] = {M(ori_op, 0, 0, 0, 0, 0), RS | RT | UIMM},
#ifndef CONFIG_CPU_MIPSR6
- { insn_pref, M(pref_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
+ [insn_pref] = {M(pref_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
#else
- { insn_pref, M6(spec3_op, 0, 0, 0, pref6_op), RS | RT | SIMM9 },
+ [insn_pref] = {M6(spec3_op, 0, 0, 0, pref6_op), RS | RT | SIMM9},
#endif
- { insn_rfe, M(cop0_op, cop_op, 0, 0, 0, rfe_op), 0 },
- { insn_rotr, M(spec_op, 1, 0, 0, 0, srl_op), RT | RD | RE },
+ [insn_rfe] = {M(cop0_op, cop_op, 0, 0, 0, rfe_op), 0},
+ [insn_rotr] = {M(spec_op, 1, 0, 0, 0, srl_op), RT | RD | RE},
+ [insn_sb] = {M(sb_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
#ifndef CONFIG_CPU_MIPSR6
- { insn_scd, M(scd_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
- { insn_sc, M(sc_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
+ [insn_sc] = {M(sc_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
+ [insn_scd] = {M(scd_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
#else
- { insn_scd, M6(spec3_op, 0, 0, 0, scd6_op), RS | RT | SIMM9 },
- { insn_sc, M6(spec3_op, 0, 0, 0, sc6_op), RS | RT | SIMM9 },
+ [insn_sc] = {M6(spec3_op, 0, 0, 0, sc6_op), RS | RT | SIMM9},
+ [insn_scd] = {M6(spec3_op, 0, 0, 0, scd6_op), RS | RT | SIMM9},
#endif
- { insn_sd, M(sd_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
- { insn_sll, M(spec_op, 0, 0, 0, 0, sll_op), RT | RD | RE },
- { insn_sllv, M(spec_op, 0, 0, 0, 0, sllv_op), RS | RT | RD },
- { insn_slt, M(spec_op, 0, 0, 0, 0, slt_op), RS | RT | RD },
- { insn_sltiu, M(sltiu_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
- { insn_sltu, M(spec_op, 0, 0, 0, 0, sltu_op), RS | RT | RD },
- { insn_sra, M(spec_op, 0, 0, 0, 0, sra_op), RT | RD | RE },
- { insn_srl, M(spec_op, 0, 0, 0, 0, srl_op), RT | RD | RE },
- { insn_srlv, M(spec_op, 0, 0, 0, 0, srlv_op), RS | RT | RD },
- { insn_subu, M(spec_op, 0, 0, 0, 0, subu_op), RS | RT | RD },
- { insn_sw, M(sw_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
- { insn_sync, M(spec_op, 0, 0, 0, 0, sync_op), RE },
- { insn_syscall, M(spec_op, 0, 0, 0, 0, syscall_op), SCIMM},
- { insn_tlbp, M(cop0_op, cop_op, 0, 0, 0, tlbp_op), 0 },
- { insn_tlbr, M(cop0_op, cop_op, 0, 0, 0, tlbr_op), 0 },
- { insn_tlbwi, M(cop0_op, cop_op, 0, 0, 0, tlbwi_op), 0 },
- { insn_tlbwr, M(cop0_op, cop_op, 0, 0, 0, tlbwr_op), 0 },
- { insn_wait, M(cop0_op, cop_op, 0, 0, 0, wait_op), SCIMM },
- { insn_wsbh, M(spec3_op, 0, 0, 0, wsbh_op, bshfl_op), RT | RD },
- { insn_xori, M(xori_op, 0, 0, 0, 0, 0), RS | RT | UIMM },
- { insn_xor, M(spec_op, 0, 0, 0, 0, xor_op), RS | RT | RD },
- { insn_yield, M(spec3_op, 0, 0, 0, 0, yield_op), RS | RD },
- { insn_ldpte, M(lwc2_op, 0, 0, 0, ldpte_op, mult_op), RS | RD },
- { insn_lddir, M(lwc2_op, 0, 0, 0, lddir_op, mult_op), RS | RT | RD },
- { insn_invalid, 0, 0 }
+ [insn_sd] = {M(sd_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
+ [insn_sh] = {M(sh_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
+ [insn_sll] = {M(spec_op, 0, 0, 0, 0, sll_op), RT | RD | RE},
+ [insn_sllv] = {M(spec_op, 0, 0, 0, 0, sllv_op), RS | RT | RD},
+ [insn_slt] = {M(spec_op, 0, 0, 0, 0, slt_op), RS | RT | RD},
+ [insn_slti] = {M(slti_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
+ [insn_sltiu] = {M(sltiu_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
+ [insn_sltu] = {M(spec_op, 0, 0, 0, 0, sltu_op), RS | RT | RD},
+ [insn_sra] = {M(spec_op, 0, 0, 0, 0, sra_op), RT | RD | RE},
+ [insn_srl] = {M(spec_op, 0, 0, 0, 0, srl_op), RT | RD | RE},
+ [insn_srlv] = {M(spec_op, 0, 0, 0, 0, srlv_op), RS | RT | RD},
+ [insn_subu] = {M(spec_op, 0, 0, 0, 0, subu_op), RS | RT | RD},
+ [insn_sw] = {M(sw_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
+ [insn_sync] = {M(spec_op, 0, 0, 0, 0, sync_op), RE},
+ [insn_syscall] = {M(spec_op, 0, 0, 0, 0, syscall_op), SCIMM},
+ [insn_tlbp] = {M(cop0_op, cop_op, 0, 0, 0, tlbp_op), 0},
+ [insn_tlbr] = {M(cop0_op, cop_op, 0, 0, 0, tlbr_op), 0},
+ [insn_tlbwi] = {M(cop0_op, cop_op, 0, 0, 0, tlbwi_op), 0},
+ [insn_tlbwr] = {M(cop0_op, cop_op, 0, 0, 0, tlbwr_op), 0},
+ [insn_wait] = {M(cop0_op, cop_op, 0, 0, 0, wait_op), SCIMM},
+ [insn_wsbh] = {M(spec3_op, 0, 0, 0, wsbh_op, bshfl_op), RT | RD},
+ [insn_xor] = {M(spec_op, 0, 0, 0, 0, xor_op), RS | RT | RD},
+ [insn_xori] = {M(xori_op, 0, 0, 0, 0, 0), RS | RT | UIMM},
+ [insn_yield] = {M(spec3_op, 0, 0, 0, 0, yield_op), RS | RD},
};
#undef M
@@ -196,20 +215,17 @@
*/
static void build_insn(u32 **buf, enum opcode opc, ...)
{
- struct insn *ip = NULL;
- unsigned int i;
+ const struct insn *ip;
va_list ap;
u32 op;
- for (i = 0; insn_table[i].opcode != insn_invalid; i++)
- if (insn_table[i].opcode == opc) {
- ip = &insn_table[i];
- break;
- }
-
- if (!ip || (opc == insn_daddiu && r4k_daddiu_bug()))
+ if (opc < 0 || opc >= insn_invalid ||
+ (opc == insn_daddiu && r4k_daddiu_bug()) ||
+ (insn_table[opc].match == 0 && insn_table[opc].fields == 0))
panic("Unsupported Micro-assembler instruction %d", opc);
+ ip = &insn_table[opc];
+
op = ip->match;
va_start(ap, opc);
if (ip->fields & RS)
diff --git a/arch/mips/mm/uasm.c b/arch/mips/mm/uasm.c
index 730363b..57570c0 100644
--- a/arch/mips/mm/uasm.c
+++ b/arch/mips/mm/uasm.c
@@ -46,26 +46,29 @@
#define SIMM9_MASK 0x1ff
enum opcode {
- insn_invalid,
insn_addiu, insn_addu, insn_and, insn_andi, insn_bbit0, insn_bbit1,
- insn_beq, insn_beql, insn_bgez, insn_bgezl, insn_bltz, insn_bltzl,
- insn_bne, insn_cache, insn_cfc1, insn_cfcmsa, insn_ctc1, insn_ctcmsa,
- insn_daddiu, insn_daddu, insn_di, insn_dins, insn_dinsm, insn_divu,
- insn_dmfc0, insn_dmtc0, insn_drotr, insn_drotr32, insn_dsll,
- insn_dsll32, insn_dsra, insn_dsrl, insn_dsrl32, insn_dsubu, insn_eret,
- insn_ext, insn_ins, insn_j, insn_jal, insn_jalr, insn_jr, insn_lb,
- insn_ld, insn_ldx, insn_lh, insn_ll, insn_lld, insn_lui, insn_lw,
- insn_lwx, insn_mfc0, insn_mfhc0, insn_mfhi, insn_mflo, insn_mtc0,
- insn_mthc0, insn_mthi, insn_mtlo, insn_mul, insn_or, insn_ori,
- insn_pref, insn_rfe, insn_rotr, insn_sc, insn_scd, insn_sd, insn_sll,
- insn_sllv, insn_slt, insn_sltiu, insn_sltu, insn_sra, insn_srl,
+ insn_beq, insn_beql, insn_bgez, insn_bgezl, insn_bgtz, insn_blez,
+ insn_bltz, insn_bltzl, insn_bne, insn_break, insn_cache, insn_cfc1,
+ insn_cfcmsa, insn_ctc1, insn_ctcmsa, insn_daddiu, insn_daddu, insn_ddivu,
+ insn_di, insn_dins, insn_dinsm, insn_dinsu, insn_divu, insn_dmfc0,
+ insn_dmtc0, insn_dmultu, insn_drotr, insn_drotr32, insn_dsbh, insn_dshd,
+ insn_dsll, insn_dsll32, insn_dsllv, insn_dsra, insn_dsra32, insn_dsrav,
+ insn_dsrl, insn_dsrl32, insn_dsrlv, insn_dsubu, insn_eret, insn_ext,
+ insn_ins, insn_j, insn_jal, insn_jalr, insn_jr, insn_lb, insn_lbu,
+ insn_ld, insn_lddir, insn_ldpte, insn_ldx, insn_lh, insn_lhu,
+ insn_ll, insn_lld, insn_lui, insn_lw, insn_lwu, insn_lwx, insn_mfc0,
+ insn_mfhc0, insn_mfhi, insn_mflo, insn_movn, insn_movz, insn_mtc0,
+ insn_mthc0, insn_mthi, insn_mtlo, insn_mul, insn_multu, insn_nor,
+ insn_or, insn_ori, insn_pref, insn_rfe, insn_rotr, insn_sb,
+ insn_sc, insn_scd, insn_sd, insn_sh, insn_sll, insn_sllv,
+ insn_slt, insn_slti, insn_sltiu, insn_sltu, insn_sra, insn_srl,
insn_srlv, insn_subu, insn_sw, insn_sync, insn_syscall, insn_tlbp,
insn_tlbr, insn_tlbwi, insn_tlbwr, insn_wait, insn_wsbh, insn_xor,
- insn_xori, insn_yield, insn_lddir, insn_ldpte, insn_lhu,
+ insn_xori, insn_yield,
+ insn_invalid /* insn_invalid must be last */
};
struct insn {
- enum opcode opcode;
u32 match;
enum fields fields;
};
@@ -215,6 +218,13 @@
} \
UASM_EXPORT_SYMBOL(uasm_i##op);
+#define I_u2u1msb32msb3(op) \
+Ip_u2u1msbu3(op) \
+{ \
+ build_insn(buf, insn##op, b, a, c+d-33, c-32); \
+} \
+UASM_EXPORT_SYMBOL(uasm_i##op);
+
#define I_u2u1msbdu3(op) \
Ip_u2u1msbu3(op) \
{ \
@@ -265,25 +275,36 @@
I_u1u2s3(_beql)
I_u1s2(_bgez)
I_u1s2(_bgezl)
+I_u1s2(_bgtz)
+I_u1s2(_blez)
I_u1s2(_bltz)
I_u1s2(_bltzl)
I_u1u2s3(_bne)
+I_u1(_break)
I_u2s3u1(_cache)
I_u1u2(_cfc1)
I_u2u1(_cfcmsa)
I_u1u2(_ctc1)
I_u2u1(_ctcmsa)
+I_u1u2(_ddivu)
I_u1u2u3(_dmfc0)
I_u1u2u3(_dmtc0)
+I_u1u2(_dmultu)
I_u2u1s3(_daddiu)
I_u3u1u2(_daddu)
I_u1(_di);
I_u1u2(_divu)
+I_u2u1(_dsbh);
+I_u2u1(_dshd);
I_u2u1u3(_dsll)
I_u2u1u3(_dsll32)
+I_u3u2u1(_dsllv)
I_u2u1u3(_dsra)
+I_u2u1u3(_dsra32)
+I_u3u2u1(_dsrav)
I_u2u1u3(_dsrl)
I_u2u1u3(_dsrl32)
+I_u3u2u1(_dsrlv)
I_u2u1u3(_drotr)
I_u2u1u3(_drotr32)
I_u3u1u2(_dsubu)
@@ -295,6 +316,7 @@
I_u2u1(_jalr)
I_u1(_jr)
I_u2s3u1(_lb)
+I_u2s3u1(_lbu)
I_u2s3u1(_ld)
I_u2s3u1(_lh)
I_u2s3u1(_lhu)
@@ -302,8 +324,11 @@
I_u2s3u1(_lld)
I_u1s2(_lui)
I_u2s3u1(_lw)
+I_u2s3u1(_lwu)
I_u1u2u3(_mfc0)
I_u1u2u3(_mfhc0)
+I_u3u1u2(_movn)
+I_u3u1u2(_movz)
I_u1(_mfhi)
I_u1(_mflo)
I_u1u2u3(_mtc0)
@@ -311,15 +336,20 @@
I_u1(_mthi)
I_u1(_mtlo)
I_u3u1u2(_mul)
-I_u2u1u3(_ori)
+I_u1u2(_multu)
+I_u3u1u2(_nor)
I_u3u1u2(_or)
+I_u2u1u3(_ori)
I_0(_rfe)
+I_u2s3u1(_sb)
I_u2s3u1(_sc)
I_u2s3u1(_scd)
I_u2s3u1(_sd)
+I_u2s3u1(_sh)
I_u2u1u3(_sll)
I_u3u2u1(_sllv)
I_s3s1s2(_slt)
+I_u2u1s3(_slti)
I_u2u1s3(_sltiu)
I_u3u1u2(_sltu)
I_u2u1u3(_sra)
@@ -340,6 +370,7 @@
I_u2u1(_yield)
I_u2u1msbu3(_dins);
I_u2u1msb32u3(_dinsm);
+I_u2u1msb32msb3(_dinsu);
I_u1(_syscall);
I_u1u2s3(_bbit0);
I_u1u2s3(_bbit1);
diff --git a/arch/mips/net/Makefile b/arch/mips/net/Makefile
index 8c27714..47d6784 100644
--- a/arch/mips/net/Makefile
+++ b/arch/mips/net/Makefile
@@ -1,3 +1,4 @@
# MIPS networking code
-obj-$(CONFIG_BPF_JIT) += bpf_jit.o bpf_jit_asm.o
+obj-$(CONFIG_MIPS_CBPF_JIT) += bpf_jit.o bpf_jit_asm.o
+obj-$(CONFIG_MIPS_EBPF_JIT) += ebpf_jit.o
diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
index 094a0ee..9be8b08 100644
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
@@ -12,6 +12,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/bug.h>
#include <asm/mipsregs.h>
#include <asm/mach-ralink/ralink_regs.h>
diff --git a/arch/mips/vdso/gettimeofday.c b/arch/mips/vdso/gettimeofday.c
index ce89c9e..974276e 100644
--- a/arch/mips/vdso/gettimeofday.c
+++ b/arch/mips/vdso/gettimeofday.c
@@ -20,6 +20,46 @@
#include <asm/unistd.h>
#include <asm/vdso.h>
+#ifdef CONFIG_MIPS_CLOCK_VSYSCALL
+
+static __always_inline long gettimeofday_fallback(struct timeval *_tv,
+ struct timezone *_tz)
+{
+ register struct timezone *tz asm("a1") = _tz;
+ register struct timeval *tv asm("a0") = _tv;
+ register long ret asm("v0");
+ register long nr asm("v0") = __NR_gettimeofday;
+ register long error asm("a3");
+
+ asm volatile(
+ " syscall\n"
+ : "=r" (ret), "=r" (error)
+ : "r" (tv), "r" (tz), "r" (nr)
+ : "memory");
+
+ return error ? -ret : ret;
+}
+
+#endif
+
+static __always_inline long clock_gettime_fallback(clockid_t _clkid,
+ struct timespec *_ts)
+{
+ register struct timespec *ts asm("a1") = _ts;
+ register clockid_t clkid asm("a0") = _clkid;
+ register long ret asm("v0");
+ register long nr asm("v0") = __NR_clock_gettime;
+ register long error asm("a3");
+
+ asm volatile(
+ " syscall\n"
+ : "=r" (ret), "=r" (error)
+ : "r" (clkid), "r" (ts), "r" (nr)
+ : "memory");
+
+ return error ? -ret : ret;
+}
+
static __always_inline int do_realtime_coarse(struct timespec *ts,
const union mips_vdso_data *data)
{
@@ -39,8 +79,8 @@
const union mips_vdso_data *data)
{
u32 start_seq;
- u32 to_mono_sec;
- u32 to_mono_nsec;
+ u64 to_mono_sec;
+ u64 to_mono_nsec;
do {
start_seq = vdso_data_read_begin(data);
@@ -148,8 +188,8 @@
{
u32 start_seq;
u64 ns;
- u32 to_mono_sec;
- u32 to_mono_nsec;
+ u64 to_mono_sec;
+ u64 to_mono_nsec;
do {
start_seq = vdso_data_read_begin(data);
@@ -187,7 +227,7 @@
ret = do_realtime(&ts, data);
if (ret)
- return ret;
+ return gettimeofday_fallback(tv, tz);
if (tv) {
tv->tv_sec = ts.tv_sec;
@@ -202,12 +242,12 @@
return 0;
}
-#endif /* CONFIG_CLKSRC_MIPS_GIC */
+#endif /* CONFIG_MIPS_CLOCK_VSYSCALL */
int __vdso_clock_gettime(clockid_t clkid, struct timespec *ts)
{
const union mips_vdso_data *data = get_vdso_data();
- int ret;
+ int ret = -1;
switch (clkid) {
case CLOCK_REALTIME_COARSE:
@@ -223,10 +263,11 @@
ret = do_monotonic(ts, data);
break;
default:
- ret = -ENOSYS;
break;
}
- /* If we return -ENOSYS libc should fall back to a syscall. */
+ if (ret)
+ ret = clock_gettime_fallback(clkid, ts);
+
return ret;
}
diff --git a/arch/mn10300/include/asm/bug.h b/arch/mn10300/include/asm/bug.h
index aa6a388..811414f 100644
--- a/arch/mn10300/include/asm/bug.h
+++ b/arch/mn10300/include/asm/bug.h
@@ -21,7 +21,7 @@
asm volatile( \
" syscall 15 \n" \
"0: \n" \
- " .section __bug_table,\"a\" \n" \
+ " .section __bug_table,\"aw\" \n" \
" .long 0b,%0,%1 \n" \
" .previous \n" \
: \
diff --git a/arch/mn10300/include/asm/nmi.h b/arch/mn10300/include/asm/nmi.h
index f3671cb..b056275 100644
--- a/arch/mn10300/include/asm/nmi.h
+++ b/arch/mn10300/include/asm/nmi.h
@@ -11,4 +11,6 @@
#ifndef _ASM_NMI_H
#define _ASM_NMI_H
+extern void arch_touch_nmi_watchdog(void);
+
#endif /* _ASM_NMI_H */
diff --git a/arch/mn10300/kernel/mn10300-watchdog-low.S b/arch/mn10300/kernel/mn10300-watchdog-low.S
index f2f5c9c..34f8773 100644
--- a/arch/mn10300/kernel/mn10300-watchdog-low.S
+++ b/arch/mn10300/kernel/mn10300-watchdog-low.S
@@ -50,9 +50,9 @@
# we can't inline it)
#
###############################################################################
- .globl touch_nmi_watchdog
- .type touch_nmi_watchdog,@function
-touch_nmi_watchdog:
+ .globl arch_touch_nmi_watchdog
+ .type arch_touch_nmi_watchdog,@function
+arch_touch_nmi_watchdog:
clr d0
clr d1
mov watchdog_alert_counter, a0
@@ -63,4 +63,4 @@
lne
ret [],0
- .size touch_nmi_watchdog,.-touch_nmi_watchdog
+ .size arch_touch_nmi_watchdog,.-arch_touch_nmi_watchdog
diff --git a/arch/mn10300/kernel/mn10300-watchdog.c b/arch/mn10300/kernel/mn10300-watchdog.c
index a2d8e69..0d5641b 100644
--- a/arch/mn10300/kernel/mn10300-watchdog.c
+++ b/arch/mn10300/kernel/mn10300-watchdog.c
@@ -31,7 +31,7 @@
static unsigned int watchdog_hz = 1;
unsigned int watchdog_alert_counter[NR_CPUS];
-EXPORT_SYMBOL(touch_nmi_watchdog);
+EXPORT_SYMBOL(arch_touch_nmi_watchdog);
/*
* the best way to detect whether a CPU has a 'hard lockup' problem
diff --git a/arch/nios2/include/asm/Kbuild b/arch/nios2/include/asm/Kbuild
index e1a843d..896c26a 100644
--- a/arch/nios2/include/asm/Kbuild
+++ b/arch/nios2/include/asm/Kbuild
@@ -1,8 +1,6 @@
generic-y += atomic.h
-generic-y += auxvec.h
generic-y += barrier.h
generic-y += bitops.h
-generic-y += bitsperlong.h
generic-y += bug.h
generic-y += bugs.h
generic-y += clkdev.h
@@ -12,55 +10,33 @@
generic-y += div64.h
generic-y += dma.h
generic-y += emergency-restart.h
-generic-y += errno.h
generic-y += exec.h
generic-y += extable.h
generic-y += fb.h
-generic-y += fcntl.h
generic-y += ftrace.h
generic-y += futex.h
generic-y += hardirq.h
generic-y += hw_irq.h
-generic-y += ioctl.h
-generic-y += ioctls.h
-generic-y += ipcbuf.h
generic-y += irq_regs.h
generic-y += irq_work.h
generic-y += kdebug.h
generic-y += kmap_types.h
-generic-y += kvm_para.h
+generic-y += kprobes.h
generic-y += local.h
generic-y += mcs_spinlock.h
generic-y += mm-arch-hooks.h
-generic-y += mman.h
generic-y += module.h
-generic-y += msgbuf.h
-generic-y += param.h
generic-y += pci.h
generic-y += percpu.h
-generic-y += poll.h
-generic-y += posix_types.h
generic-y += preempt.h
-generic-y += resource.h
generic-y += sections.h
generic-y += segment.h
-generic-y += sembuf.h
generic-y += serial.h
-generic-y += shmbuf.h
-generic-y += signal.h
-generic-y += socket.h
-generic-y += sockios.h
generic-y += spinlock.h
-generic-y += stat.h
-generic-y += statfs.h
-generic-y += termbits.h
-generic-y += termios.h
generic-y += topology.h
generic-y += trace_clock.h
-generic-y += types.h
generic-y += unaligned.h
generic-y += user.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h
-generic-y += kprobes.h
diff --git a/arch/nios2/include/asm/signal.h b/arch/nios2/include/asm/signal.h
deleted file mode 100644
index bbcf11e..0000000
--- a/arch/nios2/include/asm/signal.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright Altera Corporation (C) 2013. All rights reserved
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program. If not, see <http://www.gnu.org/licenses/>.
- *
- */
-#ifndef _NIOS2_SIGNAL_H
-#define _NIOS2_SIGNAL_H
-
-#include <uapi/asm/signal.h>
-
-#endif /* _NIOS2_SIGNAL_H */
diff --git a/arch/nios2/include/uapi/asm/Kbuild b/arch/nios2/include/uapi/asm/Kbuild
index 51eff5b..ffca24d 100644
--- a/arch/nios2/include/uapi/asm/Kbuild
+++ b/arch/nios2/include/uapi/asm/Kbuild
@@ -1,6 +1,29 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
+generic-y += auxvec.h
+generic-y += bitsperlong.h
+generic-y += errno.h
+generic-y += fcntl.h
+generic-y += ioctl.h
+generic-y += ioctls.h
+generic-y += ipcbuf.h
+generic-y += kvm_para.h
+generic-y += mman.h
+generic-y += msgbuf.h
+generic-y += param.h
+generic-y += poll.h
+generic-y += posix_types.h
+generic-y += resource.h
+generic-y += sembuf.h
generic-y += setup.h
+generic-y += shmbuf.h
generic-y += siginfo.h
+generic-y += socket.h
+generic-y += sockios.h
+generic-y += stat.h
+generic-y += statfs.h
+generic-y += termbits.h
+generic-y += termios.h
+generic-y += types.h
generic-y += ucontext.h
diff --git a/arch/openrisc/include/asm/Kbuild b/arch/openrisc/include/asm/Kbuild
index 091585a..5bea416 100644
--- a/arch/openrisc/include/asm/Kbuild
+++ b/arch/openrisc/include/asm/Kbuild
@@ -1,6 +1,4 @@
-generic-y += auxvec.h
generic-y += barrier.h
-generic-y += bitsperlong.h
generic-y += bug.h
generic-y += bugs.h
generic-y += cacheflush.h
@@ -11,57 +9,32 @@
generic-y += div64.h
generic-y += dma.h
generic-y += emergency-restart.h
-generic-y += errno.h
generic-y += exec.h
generic-y += extable.h
generic-y += fb.h
-generic-y += fcntl.h
generic-y += ftrace.h
generic-y += hardirq.h
generic-y += hw_irq.h
-generic-y += ioctl.h
-generic-y += ioctls.h
-generic-y += ipcbuf.h
generic-y += irq.h
generic-y += irq_regs.h
generic-y += irq_work.h
generic-y += kdebug.h
generic-y += kmap_types.h
-generic-y += kvm_para.h
+generic-y += kprobes.h
generic-y += local.h
generic-y += mcs_spinlock.h
generic-y += mm-arch-hooks.h
-generic-y += mman.h
generic-y += module.h
-generic-y += msgbuf.h
generic-y += pci.h
generic-y += percpu.h
-generic-y += poll.h
-generic-y += posix_types.h
generic-y += preempt.h
-generic-y += resource.h
generic-y += sections.h
generic-y += segment.h
-generic-y += sembuf.h
-generic-y += setup.h
-generic-y += shmbuf.h
-generic-y += shmparam.h
-generic-y += signal.h
-generic-y += socket.h
-generic-y += sockios.h
-generic-y += stat.h
-generic-y += statfs.h
generic-y += string.h
-generic-y += swab.h
generic-y += switch_to.h
-generic-y += termbits.h
-generic-y += termios.h
generic-y += topology.h
generic-y += trace_clock.h
-generic-y += types.h
-generic-y += ucontext.h
generic-y += user.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h
-generic-y += kprobes.h
diff --git a/arch/openrisc/include/uapi/asm/Kbuild b/arch/openrisc/include/uapi/asm/Kbuild
index b55fc2a..62286db 100644
--- a/arch/openrisc/include/uapi/asm/Kbuild
+++ b/arch/openrisc/include/uapi/asm/Kbuild
@@ -1,4 +1,31 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
+generic-y += auxvec.h
+generic-y += bitsperlong.h
+generic-y += errno.h
+generic-y += fcntl.h
+generic-y += ioctl.h
+generic-y += ioctls.h
+generic-y += ipcbuf.h
+generic-y += kvm_para.h
+generic-y += mman.h
+generic-y += msgbuf.h
+generic-y += poll.h
+generic-y += posix_types.h
+generic-y += resource.h
+generic-y += sembuf.h
+generic-y += setup.h
+generic-y += shmbuf.h
+generic-y += shmparam.h
generic-y += siginfo.h
+generic-y += signal.h
+generic-y += socket.h
+generic-y += sockios.h
+generic-y += stat.h
+generic-y += statfs.h
+generic-y += swab.h
+generic-y += termbits.h
+generic-y += termios.h
+generic-y += types.h
+generic-y += ucontext.h
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 531da9e..dda1f55 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -47,6 +47,9 @@
and later HP3000 series). The PA-RISC Linux project home page is
at <http://www.parisc-linux.org/>.
+config CPU_BIG_ENDIAN
+ def_bool y
+
config MMU
def_bool y
diff --git a/arch/parisc/configs/712_defconfig b/arch/parisc/configs/712_defconfig
index 143d026..ccc1097 100644
--- a/arch/parisc/configs/712_defconfig
+++ b/arch/parisc/configs/712_defconfig
@@ -1,11 +1,9 @@
-CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
-CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_KALLSYMS_ALL=y
CONFIG_SLAB=y
@@ -14,7 +12,6 @@
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
CONFIG_PA7100LC=y
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_GSC_LASI=y
@@ -32,11 +29,9 @@
CONFIG_IP_PNP_BOOTP=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
-# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
-CONFIG_IP_NF_QUEUE=m
CONFIG_LLC2=m
CONFIG_NET_PKTGEN=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
@@ -65,21 +60,20 @@
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
CONFIG_BONDING=m
+CONFIG_DUMMY=m
CONFIG_TUN=m
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
CONFIG_LASI_82596=y
CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
# CONFIG_KEYBOARD_HIL_OLD is not set
CONFIG_MOUSE_SERIAL=m
+CONFIG_LEGACY_PTY_COUNT=64
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=17
@@ -88,22 +82,17 @@
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_MUX is not set
CONFIG_PDC_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=64
CONFIG_PRINTER=m
CONFIG_PPDEV=m
# CONFIG_HW_RANDOM is not set
CONFIG_RAW_DRIVER=y
# CONFIG_HWMON is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_DUMMY_CONSOLE_COLUMNS=128
CONFIG_DUMMY_CONSOLE_ROWS=48
CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
@@ -111,13 +100,9 @@
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SEQUENCER=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HARMONY=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JFS_FS=m
CONFIG_XFS_FS=m
CONFIG_AUTOFS4_FS=y
@@ -130,14 +115,10 @@
CONFIG_TMPFS=y
CONFIG_UFS_FS=m
CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V4=y
-CONFIG_RPCSEC_GSS_SPKM3=m
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
CONFIG_CIFS=m
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
@@ -177,21 +158,16 @@
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
-CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAST6=m
@@ -200,6 +176,7 @@
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-CONFIG_LIBCRC32C=m
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
diff --git a/arch/parisc/configs/a500_defconfig b/arch/parisc/configs/a500_defconfig
index 1a4f776..5acb93d 100644
--- a/arch/parisc/configs/a500_defconfig
+++ b/arch/parisc/configs/a500_defconfig
@@ -1,13 +1,10 @@
-CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
-CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EXPERT=y
CONFIG_KALLSYMS_ALL=y
CONFIG_SLAB=y
@@ -16,7 +13,6 @@
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
CONFIG_PA8X00=y
CONFIG_64BIT=y
CONFIG_SMP=y
@@ -43,21 +39,17 @@
CONFIG_IP_PNP_BOOTP=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
-# CONFIG_INET_LRO is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_RAW=m
@@ -70,7 +62,6 @@
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
@@ -94,7 +85,6 @@
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_QLOGIC_1280=m
@@ -106,43 +96,38 @@
CONFIG_MD_RAID1=y
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
-CONFIG_FUSION_FC=m
CONFIG_FUSION_CTL=m
CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
CONFIG_BONDING=m
+CONFIG_DUMMY=m
CONFIG_TUN=m
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_VENDOR_3COM=y
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_3C589=m
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
+CONFIG_ACENIC=m
+CONFIG_ACENIC_OMIT_TIGON_I=y
+CONFIG_PCNET32=m
+CONFIG_TIGON3=m
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=y
CONFIG_TULIP_MMIO=y
CONFIG_PCMCIA_XIRCOM=m
CONFIG_HP100=m
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=m
CONFIG_E100=m
-CONFIG_ACENIC=m
-CONFIG_ACENIC_OMIT_TIGON_I=y
CONFIG_E1000=m
-CONFIG_TIGON3=m
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_CS=m
@@ -151,7 +136,6 @@
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_PDC_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
CONFIG_RAW_DRIVER=y
# CONFIG_HWMON is not set
@@ -160,7 +144,6 @@
# CONFIG_STI_CONSOLE is not set
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JFS_FS=m
CONFIG_XFS_FS=m
CONFIG_AUTOFS4_FS=y
@@ -173,13 +156,9 @@
CONFIG_TMPFS=y
CONFIG_UFS_FS=m
CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
+CONFIG_NFS_V4=m
CONFIG_NFSD=m
CONFIG_NFSD_V4=y
-CONFIG_RPCSEC_GSS_SPKM3=m
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
CONFIG_CIFS=m
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_850=m
@@ -187,17 +166,12 @@
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_UTF8=m
-CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
-CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-CONFIG_LIBCRC32C=m
diff --git a/arch/parisc/configs/b180_defconfig b/arch/parisc/configs/b180_defconfig
index f1a0c25..83ffd16 100644
--- a/arch/parisc/configs/b180_defconfig
+++ b/arch/parisc/configs/b180_defconfig
@@ -3,7 +3,6 @@
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
-CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
@@ -25,8 +24,6 @@
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
-CONFIG_IPV6=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
@@ -53,10 +50,9 @@
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_LASI_82596=y
CONFIG_NET_TULIP=y
CONFIG_TULIP=y
+CONFIG_LASI_82596=y
CONFIG_PPP=y
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_HIL_OLD is not set
@@ -71,40 +67,31 @@
CONFIG_PRINTER=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SEQUENCER=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HARMONY=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
CONFIG_AUTOFS4_FS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
-CONFIG_SMB_FS=y
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_UTF8=m
-CONFIG_MAGIC_SYSRQ=y
CONFIG_HEADERS_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SECURITY=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig
index 8e8f0e3..0764d39 100644
--- a/arch/parisc/configs/c3000_defconfig
+++ b/arch/parisc/configs/c3000_defconfig
@@ -1,12 +1,9 @@
-CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
-CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EXPERT=y
CONFIG_KALLSYMS_ALL=y
CONFIG_SLAB=y
@@ -15,7 +12,6 @@
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
CONFIG_PA8X00=y
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_GSC is not set
@@ -31,13 +27,11 @@
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
-CONFIG_IP_NF_QUEUE=m
CONFIG_NET_PKTGEN=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
@@ -50,13 +44,11 @@
CONFIG_IDE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_NS87415=y
-CONFIG_PATA_SIL680=m
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
@@ -76,28 +68,23 @@
CONFIG_FUSION_SPI=m
CONFIG_FUSION_CTL=m
CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
CONFIG_BONDING=m
+CONFIG_DUMMY=m
CONFIG_TUN=m
-CONFIG_NET_ETHERNET=y
+CONFIG_ACENIC=m
+CONFIG_TIGON3=m
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=y
CONFIG_TULIP_MMIO=y
-CONFIG_NET_PCI=y
CONFIG_E100=m
-CONFIG_ACENIC=m
CONFIG_E1000=m
-CONFIG_TIGON3=m
CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPPOE=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_MOUSE_PS2 is not set
CONFIG_SERIO=m
@@ -111,7 +98,6 @@
# CONFIG_HW_RANDOM is not set
CONFIG_RAW_DRIVER=y
# CONFIG_HWMON is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
@@ -121,9 +107,6 @@
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SEQUENCER=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_AD1889=y
CONFIG_USB_HIDDEV=y
CONFIG_USB=y
@@ -139,7 +122,6 @@
CONFIG_USB_LEGOTOWER=m
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
CONFIG_XFS_FS=m
CONFIG_AUTOFS4_FS=y
CONFIG_ISO9660_FS=y
@@ -149,7 +131,6 @@
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
@@ -159,18 +140,13 @@
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_UTF8=m
-CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
-CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-CONFIG_LIBCRC32C=m
diff --git a/arch/parisc/configs/c8000_defconfig b/arch/parisc/configs/c8000_defconfig
index f6a4c01..088ab94 100644
--- a/arch/parisc/configs/c8000_defconfig
+++ b/arch/parisc/configs/c8000_defconfig
@@ -1,16 +1,13 @@
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
+# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
CONFIG_EXPERT=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_SLAB=y
@@ -23,7 +20,6 @@
CONFIG_64BIT=y
CONFIG_SMP=y
CONFIG_PREEMPT=y
-# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_IOMMU_CCIO=y
CONFIG_PCI=y
CONFIG_PCI_LBA=y
@@ -146,7 +142,6 @@
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_STI is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
@@ -157,12 +152,9 @@
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_SOUND=m
CONFIG_SND=m
+CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_AD1889=m
# CONFIG_SND_USB is not set
# CONFIG_SND_GSC is not set
@@ -174,8 +166,6 @@
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT4_FS=m
CONFIG_REISERFS_FS=m
CONFIG_REISERFS_PROC_INFO=y
CONFIG_XFS_FS=m
@@ -238,11 +228,8 @@
CONFIG_DEBUG_SLAB_LEAK=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_STACKOVERFLOW=y
-CONFIG_LOCKUP_DETECTOR=y
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_PANIC_ON_OOPS=y
CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_PROVE_RCU_DELAY=y
CONFIG_DEBUG_BLOCK_EXT_DEVT=y
CONFIG_LATENCYTOP=y
CONFIG_KEYS=y
diff --git a/arch/parisc/configs/default_defconfig b/arch/parisc/configs/default_defconfig
index 310b665..52c9050 100644
--- a/arch/parisc/configs/default_defconfig
+++ b/arch/parisc/configs/default_defconfig
@@ -1,11 +1,9 @@
-CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
-CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_KALLSYMS_ALL=y
CONFIG_SLAB=y
@@ -41,9 +39,7 @@
CONFIG_IP_PNP_BOOTP=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
-# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
-CONFIG_IPV6=y
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
@@ -82,26 +78,23 @@
CONFIG_MD_RAID10=y
CONFIG_BLK_DEV_DM=y
CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
CONFIG_BONDING=m
+CONFIG_DUMMY=m
CONFIG_TUN=m
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_LASI_82596=y
-CONFIG_NET_TULIP=y
-CONFIG_TULIP=y
-CONFIG_NET_PCI=y
CONFIG_ACENIC=y
CONFIG_TIGON3=y
-CONFIG_NET_PCMCIA=y
+CONFIG_NET_TULIP=y
+CONFIG_TULIP=y
+CONFIG_LASI_82596=y
CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPPOE=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
# CONFIG_KEYBOARD_HIL_OLD is not set
CONFIG_MOUSE_SERIAL=y
+CONFIG_LEGACY_PTY_COUNT=64
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_CS=y
@@ -109,31 +102,24 @@
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_LEGACY_PTY_COUNT=64
CONFIG_PRINTER=m
CONFIG_PPDEV=m
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_DUMMY_CONSOLE_COLUMNS=128
CONFIG_DUMMY_CONSOLE_ROWS=48
CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_SOUND=y
CONFIG_SND=y
-CONFIG_SND_SEQUENCER=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_SND_SEQUENCER=y
CONFIG_SND_AD1889=y
CONFIG_SND_HARMONY=y
CONFIG_HID_GYRATION=y
@@ -141,7 +127,6 @@
CONFIG_HID_PANTHERLORD=y
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_TOPSEED=y
CONFIG_USB=y
@@ -150,21 +135,15 @@
CONFIG_USB_UHCI_HCD=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_AUTOFS_FS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_VFAT_FS=y
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V4=y
-CONFIG_RPCSEC_GSS_SPKM3=m
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
CONFIG_CIFS=m
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
@@ -204,30 +183,24 @@
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=y
-CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_KEYS=y
-CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_LIBCRC32C=m
+CONFIG_FONTS=y
diff --git a/arch/parisc/configs/generic-32bit_defconfig b/arch/parisc/configs/generic-32bit_defconfig
index 8688ba7..37ae4b5 100644
--- a/arch/parisc/configs/generic-32bit_defconfig
+++ b/arch/parisc/configs/generic-32bit_defconfig
@@ -2,15 +2,11 @@
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_BLK_DEV_INITRD=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
CONFIG_EXPERT=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_PERF_EVENTS=y
@@ -49,7 +45,6 @@
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_LLC2=m
# CONFIG_WIRELESS is not set
@@ -149,10 +144,8 @@
CONFIG_PPDEV=m
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
-CONFIG_POWER_SUPPLY=y
# CONFIG_HWMON is not set
CONFIG_AGP=y
-CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_MODE_HELPERS=y
@@ -169,11 +162,8 @@
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_SOUND=m
CONFIG_SND=m
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_SND_SEQUENCER=m
CONFIG_SND_AD1889=m
CONFIG_SND_HARMONY=m
CONFIG_HIDRAW=y
@@ -223,12 +213,7 @@
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT4_FS=y
-CONFIG_XFS_FS=m
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_RT=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_QFMT_V2=y
@@ -293,15 +278,12 @@
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_HUNG_TASK=y
-CONFIG_TIMER_STATS=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
-CONFIG_RCU_CPU_STALL_INFO=y
CONFIG_LATENCYTOP=y
CONFIG_LKDTM=m
CONFIG_KEYS=y
-CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD5=y
@@ -320,7 +302,6 @@
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC_T10DIF=y
CONFIG_FONTS=y
diff --git a/arch/parisc/configs/generic-64bit_defconfig b/arch/parisc/configs/generic-64bit_defconfig
index c564e6e..d39e7f8 100644
--- a/arch/parisc/configs/generic-64bit_defconfig
+++ b/arch/parisc/configs/generic-64bit_defconfig
@@ -8,10 +8,11 @@
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
+CONFIG_CGROUPS=y
+CONFIG_MEMCG=y
+CONFIG_MEMCG_SWAP=y
+CONFIG_CGROUP_PIDS=y
+CONFIG_CPUSETS=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -52,7 +53,6 @@
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_LRO=m
CONFIG_INET_DIAG=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_ADVANCED is not set
@@ -84,7 +84,6 @@
CONFIG_ATA_GENERIC=y
CONFIG_MD=y
CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
CONFIG_BLK_DEV_DM=m
CONFIG_DM_RAID=m
CONFIG_DM_UEVENT=y
@@ -138,21 +137,21 @@
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
-CONFIG_PHYLIB=y
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-CONFIG_BROADCOM_PHY=m
-CONFIG_ICPLUS_PHY=m
-CONFIG_REALTEK_PHY=m
-CONFIG_NATIONAL_PHY=m
-CONFIG_STE10XP=m
-CONFIG_LSI_ET1011C_PHY=m
CONFIG_MDIO_BITBANG=m
+CONFIG_PHYLIB=y
+CONFIG_BROADCOM_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_LSI_ET1011C_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_MARVELL_PHY=m
+CONFIG_NATIONAL_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_STE10XP=m
+CONFIG_VITESSE_PHY=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
@@ -166,10 +165,8 @@
CONFIG_SERIO_SERPORT=m
# CONFIG_HP_SDC is not set
CONFIG_SERIO_RAW=m
-CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_NOZOMI=m
-# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_CONSOLE=y
@@ -207,10 +204,8 @@
CONFIG_AGP_PARISC=y
CONFIG_DRM=y
CONFIG_DRM_RADEON=y
-CONFIG_DRM_RADEON_UMS=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_MODE_HELPERS=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_LOGO=y
@@ -246,8 +241,6 @@
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_SECURITY=y
CONFIG_XFS_FS=m
CONFIG_BTRFS_FS=m
CONFIG_QUOTA=y
@@ -286,27 +279,16 @@
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_STACKOVERFLOW=y
-CONFIG_LOCKUP_DETECTOR=y
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
# CONFIG_SCHED_DEBUG is not set
-CONFIG_TIMER_STATS=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_HW is not set
CONFIG_CRC_CCITT=m
CONFIG_LIBCRC32C=y
-CONFIG_XZ_DEC_X86=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_SPARC=y
diff --git a/arch/parisc/include/asm/Kbuild b/arch/parisc/include/asm/Kbuild
index a9909c2..a411395 100644
--- a/arch/parisc/include/asm/Kbuild
+++ b/arch/parisc/include/asm/Kbuild
@@ -1,5 +1,3 @@
-
-generic-y += auxvec.h
generic-y += barrier.h
generic-y += clkdev.h
generic-y += current.h
@@ -11,14 +9,12 @@
generic-y += irq_regs.h
generic-y += irq_work.h
generic-y += kdebug.h
-generic-y += kvm_para.h
+generic-y += kprobes.h
generic-y += local.h
generic-y += local64.h
generic-y += mcs_spinlock.h
generic-y += mm-arch-hooks.h
-generic-y += param.h
generic-y += percpu.h
-generic-y += poll.h
generic-y += preempt.h
generic-y += seccomp.h
generic-y += segment.h
@@ -28,4 +24,3 @@
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h
-generic-y += kprobes.h
diff --git a/arch/parisc/include/asm/bug.h b/arch/parisc/include/asm/bug.h
index d274227..07ea467 100644
--- a/arch/parisc/include/asm/bug.h
+++ b/arch/parisc/include/asm/bug.h
@@ -27,7 +27,7 @@
do { \
asm volatile("\n" \
"1:\t" PARISC_BUG_BREAK_ASM "\n" \
- "\t.pushsection __bug_table,\"a\"\n" \
+ "\t.pushsection __bug_table,\"aw\"\n" \
"2:\t" ASM_WORD_INSN "1b, %c0\n" \
"\t.short %c1, %c2\n" \
"\t.org 2b+%c3\n" \
@@ -50,7 +50,7 @@
do { \
asm volatile("\n" \
"1:\t" PARISC_BUG_BREAK_ASM "\n" \
- "\t.pushsection __bug_table,\"a\"\n" \
+ "\t.pushsection __bug_table,\"aw\"\n" \
"2:\t" ASM_WORD_INSN "1b, %c0\n" \
"\t.short %c1, %c2\n" \
"\t.org 2b+%c3\n" \
@@ -64,7 +64,7 @@
do { \
asm volatile("\n" \
"1:\t" PARISC_BUG_BREAK_ASM "\n" \
- "\t.pushsection __bug_table,\"a\"\n" \
+ "\t.pushsection __bug_table,\"aw\"\n" \
"2:\t" ASM_WORD_INSN "1b\n" \
"\t.short %c0\n" \
"\t.org 2b+%c1\n" \
diff --git a/arch/parisc/include/asm/pdcpat.h b/arch/parisc/include/asm/pdcpat.h
index 32e105f..e3c0586 100644
--- a/arch/parisc/include/asm/pdcpat.h
+++ b/arch/parisc/include/asm/pdcpat.h
@@ -150,7 +150,7 @@
#define PDC_PAT_MEM_SETGM 9L /* Set Good Memory value */
#define PDC_PAT_MEM_ADD_PAGE 10L /* ADDs a page to the cell */
#define PDC_PAT_MEM_ADDRESS 11L /* Get Physical Location From */
- /* Memory Address */
+ /* Memory Address */
#define PDC_PAT_MEM_GET_TXT_SIZE 12L /* Get Formatted Text Size */
#define PDC_PAT_MEM_GET_PD_TXT 13L /* Get PD Formatted Text */
#define PDC_PAT_MEM_GET_CELL_TXT 14L /* Get Cell Formatted Text */
@@ -228,6 +228,17 @@
unsigned long pdt_entries;
};
+struct pdc_pat_mem_phys_mem_location { /* PDC_PAT_MEM/PDC_PAT_MEM_ADDRESS */
+ u64 cabinet:8;
+ u64 ign1:8;
+ u64 ign2:8;
+ u64 cell_slot:8;
+ u64 ign3:8;
+ u64 dimm_slot:8; /* DIMM slot, e.g. 0x1A, 0x2B, show user hex value! */
+ u64 ign4:8;
+ u64 source:4; /* for mem: always 0x07 */
+ u64 source_detail:4; /* for mem: always 0x04 (SIMM or DIMM) */
+};
struct pdc_pat_pd_addr_map_entry {
unsigned char entry_type; /* 1 = Memory Descriptor Entry Type */
@@ -319,6 +330,9 @@
extern int pdc_pat_mem_read_pd_pdt(struct pdc_pat_mem_read_pd_retinfo *pret,
unsigned long *pdt_entries_ptr, unsigned long count,
unsigned long offset);
+extern int pdc_pat_mem_get_dimm_phys_location(
+ struct pdc_pat_mem_phys_mem_location *pret,
+ unsigned long phys_addr);
#endif /* __ASSEMBLY__ */
diff --git a/arch/parisc/include/asm/thread_info.h b/arch/parisc/include/asm/thread_info.h
index 88fe0aa..bc20813 100644
--- a/arch/parisc/include/asm/thread_info.h
+++ b/arch/parisc/include/asm/thread_info.h
@@ -34,7 +34,7 @@
/* thread information allocation */
-#define THREAD_SIZE_ORDER 2 /* PA-RISC requires at least 16k stack */
+#define THREAD_SIZE_ORDER 3 /* PA-RISC requires at least 32k stack */
/* Be sure to hunt all references to this down when you change the size of
* the kernel stack */
#define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER)
diff --git a/arch/parisc/include/asm/uaccess.h b/arch/parisc/include/asm/uaccess.h
index 1fd962a..cab33a0 100644
--- a/arch/parisc/include/asm/uaccess.h
+++ b/arch/parisc/include/asm/uaccess.h
@@ -6,7 +6,6 @@
*/
#include <asm/page.h>
#include <asm/cache.h>
-#include <asm-generic/uaccess-unaligned.h>
#include <linux/bug.h>
#include <linux/string.h>
diff --git a/arch/parisc/include/uapi/asm/Kbuild b/arch/parisc/include/uapi/asm/Kbuild
index 3971c60..196d2a4 100644
--- a/arch/parisc/include/uapi/asm/Kbuild
+++ b/arch/parisc/include/uapi/asm/Kbuild
@@ -1,4 +1,8 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
+generic-y += auxvec.h
+generic-y += kvm_para.h
+generic-y += param.h
+generic-y += poll.h
generic-y += resource.h
diff --git a/arch/parisc/include/uapi/asm/ioctls.h b/arch/parisc/include/uapi/asm/ioctls.h
index 674c68a..d0e3321 100644
--- a/arch/parisc/include/uapi/asm/ioctls.h
+++ b/arch/parisc/include/uapi/asm/ioctls.h
@@ -60,7 +60,7 @@
#define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */
#define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */
#define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */
-#define TIOCGPTPEER _IOR('T', 0x41, int) /* Safely open the slave */
+#define TIOCGPTPEER _IO('T', 0x41) /* Safely open the slave */
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
#define FIOCLEX 0x5451
diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c
index c32a090..19c0c14 100644
--- a/arch/parisc/kernel/cache.c
+++ b/arch/parisc/kernel/cache.c
@@ -453,8 +453,8 @@
before it can be accessed through the kernel mapping. */
preempt_disable();
flush_dcache_page_asm(__pa(vfrom), vaddr);
- preempt_enable();
copy_page_asm(vto, vfrom);
+ preempt_enable();
}
EXPORT_SYMBOL(copy_user_page);
@@ -539,6 +539,10 @@
struct vm_area_struct *vma;
pgd_t *pgd;
+ /* Flush the TLB to avoid speculation if coherency is required. */
+ if (parisc_requires_coherency())
+ flush_tlb_all();
+
/* Flushing the whole cache on each cpu takes forever on
rp3440, etc. So, avoid it if the mm isn't too big. */
if (mm_total_size(mm) >= parisc_cache_flush_threshold) {
@@ -577,33 +581,21 @@
void flush_cache_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{
- unsigned long addr;
- pgd_t *pgd;
-
BUG_ON(!vma->vm_mm->context);
- if ((end - start) >= parisc_cache_flush_threshold) {
+ /* Flush the TLB to avoid speculation if coherency is required. */
+ if (parisc_requires_coherency())
+ flush_tlb_range(vma, start, end);
+
+ if ((end - start) >= parisc_cache_flush_threshold
+ || vma->vm_mm->context != mfsp(3)) {
flush_cache_all();
return;
}
- if (vma->vm_mm->context == mfsp(3)) {
- flush_user_dcache_range_asm(start, end);
- if (vma->vm_flags & VM_EXEC)
- flush_user_icache_range_asm(start, end);
- return;
- }
-
- pgd = vma->vm_mm->pgd;
- for (addr = start & PAGE_MASK; addr < end; addr += PAGE_SIZE) {
- unsigned long pfn;
- pte_t *ptep = get_ptep(pgd, addr);
- if (!ptep)
- continue;
- pfn = pte_pfn(*ptep);
- if (pfn_valid(pfn))
- __flush_cache_page(vma, addr, PFN_PHYS(pfn));
- }
+ flush_user_dcache_range_asm(start, end);
+ if (vma->vm_flags & VM_EXEC)
+ flush_user_icache_range_asm(start, end);
}
void
@@ -612,7 +604,8 @@
BUG_ON(!vma->vm_mm->context);
if (pfn_valid(pfn)) {
- flush_tlb_page(vma, vmaddr);
+ if (parisc_requires_coherency())
+ flush_tlb_page(vma, vmaddr);
__flush_cache_page(vma, vmaddr, PFN_PHYS(pfn));
}
}
diff --git a/arch/parisc/kernel/firmware.c b/arch/parisc/kernel/firmware.c
index 9819025..f622a31 100644
--- a/arch/parisc/kernel/firmware.c
+++ b/arch/parisc/kernel/firmware.c
@@ -1481,12 +1481,44 @@
unsigned long offset)
{
int retval;
- unsigned long flags;
+ unsigned long flags, entries;
spin_lock_irqsave(&pdc_lock, flags);
retval = mem_pdc_call(PDC_PAT_MEM, PDC_PAT_MEM_PD_READ,
- __pa(&pret), __pa(pdt_entries_ptr),
+ __pa(&pdc_result), __pa(pdt_entries_ptr),
count, offset);
+
+ if (retval == PDC_OK) {
+ entries = min(pdc_result[0], count);
+ pret->actual_count_bytes = entries;
+ pret->pdt_entries = entries / sizeof(unsigned long);
+ }
+
+ spin_unlock_irqrestore(&pdc_lock, flags);
+
+ return retval;
+}
+
+/**
+ * pdc_pat_mem_get_dimm_phys_location - Get physical DIMM slot via PAT firmware
+ * @pret: ptr to hold returned information
+ * @phys_addr: physical address to examine
+ *
+ */
+int pdc_pat_mem_get_dimm_phys_location(
+ struct pdc_pat_mem_phys_mem_location *pret,
+ unsigned long phys_addr)
+{
+ int retval;
+ unsigned long flags;
+
+ spin_lock_irqsave(&pdc_lock, flags);
+ retval = mem_pdc_call(PDC_PAT_MEM, PDC_PAT_MEM_ADDRESS,
+ __pa(&pdc_result), phys_addr);
+
+ if (retval == PDC_OK)
+ memcpy(pret, &pdc_result, sizeof(*pret));
+
spin_unlock_irqrestore(&pdc_lock, flags);
return retval;
diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c
index ba5e1c7..0ca2540 100644
--- a/arch/parisc/kernel/irq.c
+++ b/arch/parisc/kernel/irq.c
@@ -380,7 +380,7 @@
/*
* IRQ STACK - used for irq handler
*/
-#define IRQ_STACK_SIZE (4096 << 2) /* 16k irq stack size */
+#define IRQ_STACK_SIZE (4096 << 3) /* 32k irq stack size */
union irq_stack_union {
unsigned long stack[IRQ_STACK_SIZE/sizeof(unsigned long)];
@@ -413,6 +413,10 @@
if (regs->sr[7])
return;
+ /* exit if already in panic */
+ if (sysctl_panic_on_stackoverflow < 0)
+ return;
+
/* calculate kernel stack usage */
stack_usage = sp - stack_start;
#ifdef CONFIG_IRQSTACKS
@@ -454,8 +458,10 @@
#ifdef CONFIG_IRQSTACKS
panic_check:
#endif
- if (sysctl_panic_on_stackoverflow)
+ if (sysctl_panic_on_stackoverflow) {
+ sysctl_panic_on_stackoverflow = -1; /* disable further checks */
panic("low stack detected by irq handler - check messages\n");
+ }
#endif
}
diff --git a/arch/parisc/kernel/pdt.c b/arch/parisc/kernel/pdt.c
index f3a797e..d02874e 100644
--- a/arch/parisc/kernel/pdt.c
+++ b/arch/parisc/kernel/pdt.c
@@ -112,10 +112,12 @@
#ifdef CONFIG_64BIT
struct pdc_pat_mem_read_pd_retinfo pat_pret;
+ /* try old obsolete PAT firmware function first */
+ pdt_type = PDT_PAT_OLD;
ret = pdc_pat_mem_read_cell_pdt(&pat_pret, pdt_entry,
MAX_PDT_ENTRIES);
if (ret != PDC_OK) {
- pdt_type = PDT_PAT_OLD;
+ pdt_type = PDT_PAT_NEW;
ret = pdc_pat_mem_read_pd_pdt(&pat_pret, pdt_entry,
MAX_PDT_TABLE_SIZE, 0);
}
@@ -131,11 +133,20 @@
}
for (i = 0; i < pdt_status.pdt_entries; i++) {
- if (i < 20)
- pr_warn("PDT: BAD PAGE #%d at 0x%08lx (error_type = %lu)\n",
- i,
- pdt_entry[i] & PAGE_MASK,
- pdt_entry[i] & 1);
+ struct pdc_pat_mem_phys_mem_location loc;
+
+ /* get DIMM slot number */
+ loc.dimm_slot = 0xff;
+#ifdef CONFIG_64BIT
+ pdc_pat_mem_get_dimm_phys_location(&loc, pdt_entry[i]);
+#endif
+
+ pr_warn("PDT: BAD PAGE #%d at 0x%08lx, "
+ "DIMM slot %02x (error_type = %lu)\n",
+ i,
+ pdt_entry[i] & PAGE_MASK,
+ loc.dimm_slot,
+ pdt_entry[i] & 1);
/* mark memory page bad */
memblock_reserve(pdt_entry[i] & PAGE_MASK, PAGE_SIZE);
diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c
index b64d7d2..a45a67d 100644
--- a/arch/parisc/kernel/process.c
+++ b/arch/parisc/kernel/process.c
@@ -53,6 +53,7 @@
#include <linux/uaccess.h>
#include <linux/rcupdate.h>
#include <linux/random.h>
+#include <linux/nmi.h>
#include <asm/io.h>
#include <asm/asm-offsets.h>
@@ -145,6 +146,7 @@
/* prevent soft lockup/stalled CPU messages for endless loop. */
rcu_sysrq_start();
+ lockup_detector_suspend();
for (;;);
}
diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S
index 3d6ef1b..ffe2cbf 100644
--- a/arch/parisc/kernel/vmlinux.lds.S
+++ b/arch/parisc/kernel/vmlinux.lds.S
@@ -78,6 +78,8 @@
*(.text.sys_exit)
*(.text.do_sigaltstack)
*(.text.do_fork)
+ *(.text.div)
+ *($$*) /* millicode routines */
*(.text.*)
*(.fixup)
*(.lock.text) /* out-of-line lock text */
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 7177a3f..36f858c 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -82,7 +82,7 @@
config NMI_IPI
bool
- depends on SMP && (DEBUGGER || KEXEC_CORE)
+ depends on SMP && (DEBUGGER || KEXEC_CORE || HARDLOCKUP_DETECTOR)
default y
config STACKTRACE_SUPPORT
@@ -125,6 +125,7 @@
select ARCH_HAS_DEVMEM_IS_ALLOWED
select ARCH_HAS_DMA_SET_COHERENT_MASK
select ARCH_HAS_ELF_RANDOMIZE
+ select ARCH_HAS_FORTIFY_SOURCE
select ARCH_HAS_GCOV_PROFILE_ALL
select ARCH_HAS_SCALED_CPUTIME if VIRT_CPU_ACCOUNTING_NATIVE
select ARCH_HAS_SG_CHAIN
@@ -192,11 +193,13 @@
select HAVE_MEMBLOCK
select HAVE_MEMBLOCK_NODE_MAP
select HAVE_MOD_ARCH_SPECIFIC
- select HAVE_NMI if PERF_EVENTS
+ select HAVE_NMI if PERF_EVENTS || (PPC64 && PPC_BOOK3S)
+ select HAVE_HARDLOCKUP_DETECTOR_ARCH if (PPC64 && PPC_BOOK3S)
select HAVE_OPROFILE
select HAVE_OPTPROBES if PPC64
select HAVE_PERF_EVENTS
select HAVE_PERF_EVENTS_NMI if PPC64
+ select HAVE_HARDLOCKUP_DETECTOR_PERF if HAVE_PERF_EVENTS_NMI && !HAVE_HARDLOCKUP_DETECTOR_ARCH
select HAVE_PERF_REGS
select HAVE_PERF_USER_STACK_DUMP
select HAVE_RCU_TABLE_FREE if SMP
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 8d4ed73..e2b3e7a 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -59,6 +59,19 @@
machine-$(CONFIG_CPU_LITTLE_ENDIAN) += le
UTS_MACHINE := $(subst $(space),,$(machine-y))
+# XXX This needs to be before we override LD below
+ifdef CONFIG_PPC32
+KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
+else
+ifeq ($(call ld-ifversion, -ge, 225000000, y),y)
+# Have the linker provide sfpr if possible.
+# There is a corresponding test in arch/powerpc/lib/Makefile
+KBUILD_LDFLAGS_MODULE += --save-restore-funcs
+else
+KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
+endif
+endif
+
ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y)
override LD += -EL
LDEMULATION := lppc
@@ -190,18 +203,6 @@
CHECKFLAGS += -D__LITTLE_ENDIAN__
endif
-ifdef CONFIG_PPC32
-KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
-else
-ifeq ($(call ld-ifversion, -ge, 225000000, y),y)
-# Have the linker provide sfpr if possible.
-# There is a corresponding test in arch/powerpc/lib/Makefile
-KBUILD_LDFLAGS_MODULE += --save-restore-funcs
-else
-KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
-endif
-endif
-
ifeq ($(CONFIG_476FPE_ERR46),y)
KBUILD_LDFLAGS_MODULE += --ppc476-workaround \
-T $(srctree)/arch/powerpc/platforms/44x/ppc476_modules.lds
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index a7814a7..6f952fe 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -25,12 +25,20 @@
BOOTCFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
-fno-strict-aliasing -Os -msoft-float -pipe \
-fomit-frame-pointer -fno-builtin -fPIC -nostdinc \
- -isystem $(shell $(CROSS32CC) -print-file-name=include) \
-D$(compress-y)
+BOOTCC := $(CC)
ifdef CONFIG_PPC64_BOOT_WRAPPER
BOOTCFLAGS += -m64
+else
+BOOTCFLAGS += -m32
+ifdef CROSS32_COMPILE
+ BOOTCC := $(CROSS32_COMPILE)gcc
endif
+endif
+
+BOOTCFLAGS += -isystem $(shell $(BOOTCC) -print-file-name=include)
+
ifdef CONFIG_CPU_BIG_ENDIAN
BOOTCFLAGS += -mbig-endian
else
@@ -183,10 +191,10 @@
empty.c zImage.coff.lds zImage.ps3.lds zImage.lds
quiet_cmd_bootcc = BOOTCC $@
- cmd_bootcc = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $<
+ cmd_bootcc = $(BOOTCC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $<
quiet_cmd_bootas = BOOTAS $@
- cmd_bootas = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTAFLAGS) -c -o $@ $<
+ cmd_bootas = $(BOOTCC) -Wp,-MD,$(depfile) $(BOOTAFLAGS) -c -o $@ $<
quiet_cmd_bootar = BOOTAR $@
cmd_bootar = $(CROSS32AR) -cr$(KBUILD_ARFLAGS) $@.$$$$ $(filter-out FORCE,$^); mv $@.$$$$ $@
diff --git a/arch/powerpc/include/asm/atomic.h b/arch/powerpc/include/asm/atomic.h
index 2b90335..a2cc801 100644
--- a/arch/powerpc/include/asm/atomic.h
+++ b/arch/powerpc/include/asm/atomic.h
@@ -560,7 +560,7 @@
* Atomically increments @v by 1, so long as @v is non-zero.
* Returns non-zero if @v was non-zero, and zero otherwise.
*/
-static __inline__ long atomic64_inc_not_zero(atomic64_t *v)
+static __inline__ int atomic64_inc_not_zero(atomic64_t *v)
{
long t1, t2;
@@ -579,7 +579,7 @@
: "r" (&v->counter)
: "cc", "xer", "memory");
- return t1;
+ return t1 != 0;
}
#endif /* __powerpc64__ */
diff --git a/arch/powerpc/include/asm/book3s/64/hash.h b/arch/powerpc/include/asm/book3s/64/hash.h
index 0ce513f..36fc7bf 100644
--- a/arch/powerpc/include/asm/book3s/64/hash.h
+++ b/arch/powerpc/include/asm/book3s/64/hash.h
@@ -91,6 +91,7 @@
}
#ifdef CONFIG_STRICT_KERNEL_RWX
extern void hash__mark_rodata_ro(void);
+extern void hash__mark_initmem_nx(void);
#endif
extern void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
diff --git a/arch/powerpc/include/asm/book3s/64/mmu.h b/arch/powerpc/include/asm/book3s/64/mmu.h
index 77529a3..5b4023c 100644
--- a/arch/powerpc/include/asm/book3s/64/mmu.h
+++ b/arch/powerpc/include/asm/book3s/64/mmu.h
@@ -59,13 +59,14 @@
#define PRTS_MASK 0x1f /* process table size field */
#define PRTB_MASK 0x0ffffffffffff000UL
-/*
- * Limit process table to PAGE_SIZE table. This
- * also limit the max pid we can support.
- * MAX_USER_CONTEXT * 16 bytes of space.
- */
-#define PRTB_SIZE_SHIFT (CONTEXT_BITS + 4)
-#define PRTB_ENTRIES (1ul << CONTEXT_BITS)
+/* Number of supported PID bits */
+extern unsigned int mmu_pid_bits;
+
+/* Base PID to allocate from */
+extern unsigned int mmu_base_pid;
+
+#define PRTB_SIZE_SHIFT (mmu_pid_bits + 4)
+#define PRTB_ENTRIES (1ul << mmu_pid_bits)
/*
* Power9 currently only support 64K partition table size.
diff --git a/arch/powerpc/include/asm/book3s/64/pgalloc.h b/arch/powerpc/include/asm/book3s/64/pgalloc.h
index 20b1485..e2329db 100644
--- a/arch/powerpc/include/asm/book3s/64/pgalloc.h
+++ b/arch/powerpc/include/asm/book3s/64/pgalloc.h
@@ -56,7 +56,7 @@
return (pgd_t *)__get_free_page(pgtable_gfp_flags(mm, PGALLOC_GFP));
#else
struct page *page;
- page = alloc_pages(pgtable_gfp_flags(mm, PGALLOC_GFP | __GFP_REPEAT),
+ page = alloc_pages(pgtable_gfp_flags(mm, PGALLOC_GFP | __GFP_RETRY_MAYFAIL),
4);
if (!page)
return NULL;
diff --git a/arch/powerpc/include/asm/book3s/64/pgtable.h b/arch/powerpc/include/asm/book3s/64/pgtable.h
index c0737c8..818a58f 100644
--- a/arch/powerpc/include/asm/book3s/64/pgtable.h
+++ b/arch/powerpc/include/asm/book3s/64/pgtable.h
@@ -608,9 +608,17 @@
return __pte(pte_val(pte) | _PAGE_SPECIAL|_PAGE_DEVMAP);
}
+/*
+ * This is potentially called with a pmd as the argument, in which case it's not
+ * safe to check _PAGE_DEVMAP unless we also confirm that _PAGE_PTE is set.
+ * That's because the bit we use for _PAGE_DEVMAP is not reserved for software
+ * use in page directory entries (ie. non-ptes).
+ */
static inline int pte_devmap(pte_t pte)
{
- return !!(pte_raw(pte) & cpu_to_be64(_PAGE_DEVMAP));
+ u64 mask = cpu_to_be64(_PAGE_DEVMAP | _PAGE_PTE);
+
+ return (pte_raw(pte) & mask) == mask;
}
static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
@@ -1192,5 +1200,6 @@
BUILD_BUG();
return 0;
}
+
#endif /* __ASSEMBLY__ */
#endif /* _ASM_POWERPC_BOOK3S_64_PGTABLE_H_ */
diff --git a/arch/powerpc/include/asm/book3s/64/radix.h b/arch/powerpc/include/asm/book3s/64/radix.h
index 487709f..544440b 100644
--- a/arch/powerpc/include/asm/book3s/64/radix.h
+++ b/arch/powerpc/include/asm/book3s/64/radix.h
@@ -118,6 +118,7 @@
#ifdef CONFIG_STRICT_KERNEL_RWX
extern void radix__mark_rodata_ro(void);
+extern void radix__mark_initmem_nx(void);
#endif
static inline unsigned long __radix_pte_update(pte_t *ptep, unsigned long clr,
diff --git a/arch/powerpc/include/asm/bug.h b/arch/powerpc/include/asm/bug.h
index 0151af6..87fcc19 100644
--- a/arch/powerpc/include/asm/bug.h
+++ b/arch/powerpc/include/asm/bug.h
@@ -18,7 +18,7 @@
#include <asm/asm-offsets.h>
#ifdef CONFIG_DEBUG_BUGVERBOSE
.macro EMIT_BUG_ENTRY addr,file,line,flags
- .section __bug_table,"a"
+ .section __bug_table,"aw"
5001: PPC_LONG \addr, 5002f
.short \line, \flags
.org 5001b+BUG_ENTRY_SIZE
@@ -29,7 +29,7 @@
.endm
#else
.macro EMIT_BUG_ENTRY addr,file,line,flags
- .section __bug_table,"a"
+ .section __bug_table,"aw"
5001: PPC_LONG \addr
.short \flags
.org 5001b+BUG_ENTRY_SIZE
@@ -42,14 +42,14 @@
sizeof(struct bug_entry), respectively */
#ifdef CONFIG_DEBUG_BUGVERBOSE
#define _EMIT_BUG_ENTRY \
- ".section __bug_table,\"a\"\n" \
+ ".section __bug_table,\"aw\"\n" \
"2:\t" PPC_LONG "1b, %0\n" \
"\t.short %1, %2\n" \
".org 2b+%3\n" \
".previous\n"
#else
#define _EMIT_BUG_ENTRY \
- ".section __bug_table,\"a\"\n" \
+ ".section __bug_table,\"aw\"\n" \
"2:\t" PPC_LONG "1b\n" \
"\t.short %2\n" \
".org 2b+%3\n" \
diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h
index da7e943..0c76675 100644
--- a/arch/powerpc/include/asm/mmu_context.h
+++ b/arch/powerpc/include/asm/mmu_context.h
@@ -45,7 +45,7 @@
#ifdef CONFIG_PPC_BOOK3S_64
extern void radix__switch_mmu_context(struct mm_struct *prev,
- struct mm_struct *next);
+ struct mm_struct *next);
static inline void switch_mmu_context(struct mm_struct *prev,
struct mm_struct *next,
struct task_struct *tsk)
@@ -67,6 +67,12 @@
extern void mmu_context_init(void);
#endif
+#if defined(CONFIG_KVM_BOOK3S_HV_POSSIBLE) && defined(CONFIG_PPC_RADIX_MMU)
+extern void radix_kvm_prefetch_workaround(struct mm_struct *mm);
+#else
+static inline void radix_kvm_prefetch_workaround(struct mm_struct *mm) { }
+#endif
+
extern void switch_cop(struct mm_struct *next);
extern int use_cop(unsigned long acop, struct mm_struct *mm);
extern void drop_cop(unsigned long acop, struct mm_struct *mm);
@@ -79,9 +85,13 @@
struct mm_struct *next,
struct task_struct *tsk)
{
+ bool new_on_cpu = false;
+
/* Mark this context has been used on the new CPU */
- if (!cpumask_test_cpu(smp_processor_id(), mm_cpumask(next)))
+ if (!cpumask_test_cpu(smp_processor_id(), mm_cpumask(next))) {
cpumask_set_cpu(smp_processor_id(), mm_cpumask(next));
+ new_on_cpu = true;
+ }
/* 32-bit keeps track of the current PGDIR in the thread struct */
#ifdef CONFIG_PPC32
@@ -109,6 +119,10 @@
if (cpu_has_feature(CPU_FTR_ALTIVEC))
asm volatile ("dssall");
#endif /* CONFIG_ALTIVEC */
+
+ if (new_on_cpu)
+ radix_kvm_prefetch_workaround(next);
+
/*
* The actual HW switching method differs between the various
* sub architectures. Out of line for now
diff --git a/arch/powerpc/include/asm/nmi.h b/arch/powerpc/include/asm/nmi.h
index ff1ccb3..6f8e79c 100644
--- a/arch/powerpc/include/asm/nmi.h
+++ b/arch/powerpc/include/asm/nmi.h
@@ -1,4 +1,15 @@
#ifndef _ASM_NMI_H
#define _ASM_NMI_H
+#ifdef CONFIG_HARDLOCKUP_DETECTOR
+extern void arch_touch_nmi_watchdog(void);
+
+extern void arch_trigger_cpumask_backtrace(const cpumask_t *mask,
+ bool exclude_self);
+#define arch_trigger_cpumask_backtrace arch_trigger_cpumask_backtrace
+
+#else
+static inline void arch_touch_nmi_watchdog(void) {}
+#endif
+
#endif /* _ASM_NMI_H */
diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h
index ef930ba..3130a73 100644
--- a/arch/powerpc/include/asm/opal-api.h
+++ b/arch/powerpc/include/asm/opal-api.h
@@ -876,6 +876,15 @@
enum {
OPAL_REINIT_CPUS_HILE_BE = (1 << 0),
OPAL_REINIT_CPUS_HILE_LE = (1 << 1),
+
+ /* These two define the base MMU mode of the host on P9
+ *
+ * On P9 Nimbus DD2.0 and Cumlus (and later), KVM can still
+ * create hash guests in "radix" mode with care (full core
+ * switch only).
+ */
+ OPAL_REINIT_CPUS_MMU_HASH = (1 << 2),
+ OPAL_REINIT_CPUS_MMU_RADIX = (1 << 3),
};
typedef struct oppanel_line {
diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h
index dd01212..afae9a3 100644
--- a/arch/powerpc/include/asm/pgtable.h
+++ b/arch/powerpc/include/asm/pgtable.h
@@ -80,6 +80,13 @@
void pgtable_cache_add(unsigned shift, void (*ctor)(void *));
void pgtable_cache_init(void);
+
+#ifdef CONFIG_STRICT_KERNEL_RWX
+void mark_initmem_nx(void);
+#else
+static inline void mark_initmem_nx(void) { }
+#endif
+
#endif /* __ASSEMBLY__ */
#endif /* _ASM_POWERPC_PGTABLE_H */
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 7e50e47..a3b6575 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -1303,7 +1303,7 @@
" .llong 0\n" \
".previous" \
: "=r" (rval) \
- : "i" (CPU_FTR_CELL_TB_BUG), "i" (SPRN_TBRL)); \
+ : "i" (CPU_FTR_CELL_TB_BUG), "i" (SPRN_TBRL) : "cr0"); \
rval;})
#else
#define mftb() ({unsigned long rval; \
diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index ebddb21..8ea9850 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -55,6 +55,8 @@
int (*cpu_bootable)(unsigned int nr);
};
+extern void smp_flush_nmi_ipi(u64 delay_us);
+extern int smp_send_nmi_ipi(int cpu, void (*fn)(struct pt_regs *), u64 delay_us);
extern void smp_send_debugger_break(void);
extern void start_secondary_resume(void);
extern void smp_generic_give_timebase(void);
diff --git a/arch/powerpc/include/asm/uaccess.h b/arch/powerpc/include/asm/uaccess.h
index 4cf57f2..9c0e60c 100644
--- a/arch/powerpc/include/asm/uaccess.h
+++ b/arch/powerpc/include/asm/uaccess.h
@@ -90,9 +90,6 @@
#define __put_user_inatomic(x, ptr) \
__put_user_nosleep((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
-#define __get_user_unaligned __get_user
-#define __put_user_unaligned __put_user
-
extern long __put_user_bad(void);
/*
diff --git a/arch/powerpc/include/uapi/asm/ioctls.h b/arch/powerpc/include/uapi/asm/ioctls.h
index bfd609a..e3b1046 100644
--- a/arch/powerpc/include/uapi/asm/ioctls.h
+++ b/arch/powerpc/include/uapi/asm/ioctls.h
@@ -100,7 +100,7 @@
#define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */
#define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */
#define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */
-#define TIOCGPTPEER _IOR('T', 0x41, int) /* Safely open the slave */
+#define TIOCGPTPEER _IO('T', 0x41) /* Safely open the slave */
#define TIOCSERCONFIG 0x5453
#define TIOCSERGWILD 0x5454
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 0845eeb..4aa7c14 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -38,6 +38,7 @@
signal_64.o ptrace32.o \
paca.o nvram_64.o firmware.o
obj-$(CONFIG_VDSO32) += vdso32/
+obj-$(CONFIG_HARDLOCKUP_DETECTOR) += watchdog.o
obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_ppc970.o cpu_setup_pa6t.o
obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_power.o
diff --git a/arch/powerpc/kernel/cpu_setup_power.S b/arch/powerpc/kernel/cpu_setup_power.S
index 10cb289..610955f 100644
--- a/arch/powerpc/kernel/cpu_setup_power.S
+++ b/arch/powerpc/kernel/cpu_setup_power.S
@@ -218,13 +218,20 @@
ptesync
1: blr
+/*
+ * Flush the TLB in hash mode. Hash must flush with RIC=2 once for process
+ * and one for partition scope to clear process and partition table entries.
+ */
__init_tlb_power9:
- li r6,POWER9_TLB_SETS_HASH
+ li r6,POWER9_TLB_SETS_HASH - 1
mtctr r6
li r7,0xc00 /* IS field = 0b11 */
+ li r8,0
ptesync
-2: tlbiel r7
- addi r7,r7,0x1000
+ PPC_TLBIEL(7, 8, 2, 1, 0)
+ PPC_TLBIEL(7, 8, 2, 0, 0)
+2: addi r7,r7,0x1000
+ PPC_TLBIEL(7, 8, 0, 0, 0)
bdnz 2b
ptesync
1: blr
diff --git a/arch/powerpc/kernel/dt_cpu_ftrs.c b/arch/powerpc/kernel/dt_cpu_ftrs.c
index 4c7656d..1df770e 100644
--- a/arch/powerpc/kernel/dt_cpu_ftrs.c
+++ b/arch/powerpc/kernel/dt_cpu_ftrs.c
@@ -94,9 +94,6 @@
static void cpufeatures_flush_tlb(void)
{
- unsigned long rb;
- unsigned int i, num_sets;
-
/*
* This is a temporary measure to keep equivalent TLB flush as the
* cputable based setup code.
@@ -105,24 +102,15 @@
case PVR_POWER8:
case PVR_POWER8E:
case PVR_POWER8NVL:
- num_sets = POWER8_TLB_SETS;
+ __flush_tlb_power8(POWER8_TLB_SETS);
break;
case PVR_POWER9:
- num_sets = POWER9_TLB_SETS_HASH;
+ __flush_tlb_power9(POWER9_TLB_SETS_HASH);
break;
default:
- num_sets = 1;
pr_err("unknown CPU version for boot TLB flush\n");
break;
}
-
- asm volatile("ptesync" : : : "memory");
- rb = TLBIEL_INVAL_SET;
- for (i = 0; i < num_sets; i++) {
- asm volatile("tlbiel %0" : : "r" (rb));
- rb += 1 << TLBIEL_INVAL_SET_SHIFT;
- }
- asm volatile("ptesync" : : : "memory");
}
static void __restore_cpu_cpufeatures(void)
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 4c18a5f..f14f3c0 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -824,7 +824,7 @@
* r3 volatile parameter and return value for status
* r4-r10 volatile input and output value
* r11 volatile hypercall number and output value
- * r12 volatile
+ * r12 volatile input and output value
* r13-r31 nonvolatile
* LR nonvolatile
* CTR volatile
@@ -834,25 +834,26 @@
* Other registers nonvolatile
*
* The intersection of volatile registers that don't contain possible
- * inputs is: r12, cr0, xer, ctr. We may use these as scratch regs
- * upon entry without saving.
+ * inputs is: cr0, xer, ctr. We may use these as scratch regs upon entry
+ * without saving, though xer is not a good idea to use, as hardware may
+ * interpret some bits so it may be costly to change them.
*/
#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
/*
* There is a little bit of juggling to get syscall and hcall
- * working well. Save r10 in ctr to be restored in case it is a
- * hcall.
+ * working well. Save r13 in ctr to avoid using SPRG scratch
+ * register.
*
* Userspace syscalls have already saved the PPR, hcalls must save
* it before setting HMT_MEDIUM.
*/
#define SYSCALL_KVMTEST \
- mr r12,r13; \
+ mtctr r13; \
GET_PACA(r13); \
- mtctr r10; \
+ std r10,PACA_EXGEN+EX_R10(r13); \
KVMTEST_PR(0xc00); /* uses r10, branch to do_kvm_0xc00_system_call */ \
HMT_MEDIUM; \
- mr r9,r12; \
+ mfctr r9;
#else
#define SYSCALL_KVMTEST \
@@ -935,8 +936,8 @@
* This is a hcall, so register convention is as above, with these
* differences:
* r13 = PACA
- * r12 = orig r13
- * ctr = orig r10
+ * ctr = orig r13
+ * orig r10 saved in PACA
*/
TRAMP_KVM_BEGIN(do_kvm_0xc00)
/*
@@ -944,14 +945,13 @@
* HMT_MEDIUM. That allows the KVM code to save that value into the
* guest state (it is the guest's PPR value).
*/
- OPT_GET_SPR(r0, SPRN_PPR, CPU_FTR_HAS_PPR)
+ OPT_GET_SPR(r10, SPRN_PPR, CPU_FTR_HAS_PPR)
HMT_MEDIUM
- OPT_SAVE_REG_TO_PACA(PACA_EXGEN+EX_PPR, r0, CPU_FTR_HAS_PPR)
+ OPT_SAVE_REG_TO_PACA(PACA_EXGEN+EX_PPR, r10, CPU_FTR_HAS_PPR)
mfctr r10
- SET_SCRATCH0(r12)
+ SET_SCRATCH0(r10)
std r9,PACA_EXGEN+EX_R9(r13)
mfcr r9
- std r10,PACA_EXGEN+EX_R10(r13)
KVM_HANDLER(PACA_EXGEN, EXC_STD, 0xc00)
#endif
@@ -1314,6 +1314,39 @@
EXC_VIRT_NONE(0x5800, 0x100)
#endif
+#if defined(CONFIG_HARDLOCKUP_DETECTOR) && defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH)
+
+#define MASKED_DEC_HANDLER_LABEL 3f
+
+#define MASKED_DEC_HANDLER(_H) \
+3: /* soft-nmi */ \
+ std r12,PACA_EXGEN+EX_R12(r13); \
+ GET_SCRATCH0(r10); \
+ std r10,PACA_EXGEN+EX_R13(r13); \
+ EXCEPTION_PROLOG_PSERIES_1(soft_nmi_common, _H)
+
+/*
+ * Branch to soft_nmi_interrupt using the emergency stack. The emergency
+ * stack is one that is usable by maskable interrupts so long as MSR_EE
+ * remains off. It is used for recovery when something has corrupted the
+ * normal kernel stack, for example. The "soft NMI" must not use the process
+ * stack because we want irq disabled sections to avoid touching the stack
+ * at all (other than PMU interrupts), so use the emergency stack for this,
+ * and run it entirely with interrupts hard disabled.
+ */
+EXC_COMMON_BEGIN(soft_nmi_common)
+ mr r10,r1
+ ld r1,PACAEMERGSP(r13)
+ subi r1,r1,INT_FRAME_SIZE
+ EXCEPTION_COMMON_NORET_STACK(PACA_EXGEN, 0x900,
+ system_reset, soft_nmi_interrupt,
+ ADD_NVGPRS;ADD_RECONCILE)
+ b ret_from_except
+
+#else
+#define MASKED_DEC_HANDLER_LABEL 2f /* normal return */
+#define MASKED_DEC_HANDLER(_H)
+#endif
/*
* An interrupt came in while soft-disabled. We set paca->irq_happened, then:
@@ -1336,7 +1369,7 @@
lis r10,0x7fff; \
ori r10,r10,0xffff; \
mtspr SPRN_DEC,r10; \
- b 2f; \
+ b MASKED_DEC_HANDLER_LABEL; \
1: cmpwi r10,PACA_IRQ_DBELL; \
beq 2f; \
cmpwi r10,PACA_IRQ_HMI; \
@@ -1351,7 +1384,8 @@
ld r11,PACA_EXGEN+EX_R11(r13); \
GET_SCRATCH0(r13); \
##_H##rfid; \
- b .
+ b .; \
+ MASKED_DEC_HANDLER(_H)
/*
* Real mode exceptions actually use this too, but alternate
diff --git a/arch/powerpc/kernel/fadump.c b/arch/powerpc/kernel/fadump.c
index 3079518..dc0c49c 100644
--- a/arch/powerpc/kernel/fadump.c
+++ b/arch/powerpc/kernel/fadump.c
@@ -999,8 +999,7 @@
phdr->p_paddr = fadump_relocate(paddr_vmcoreinfo_note());
phdr->p_offset = phdr->p_paddr;
- phdr->p_memsz = vmcoreinfo_max_size;
- phdr->p_filesz = vmcoreinfo_max_size;
+ phdr->p_memsz = phdr->p_filesz = VMCOREINFO_NOTE_SIZE;
/* Increment number of program headers. */
(elf->e_phnum)++;
diff --git a/arch/powerpc/kernel/idle_book3s.S b/arch/powerpc/kernel/idle_book3s.S
index 5adb390e..e6252c5 100644
--- a/arch/powerpc/kernel/idle_book3s.S
+++ b/arch/powerpc/kernel/idle_book3s.S
@@ -30,6 +30,7 @@
* Use unused space in the interrupt stack to save and restore
* registers for winkle support.
*/
+#define _MMCR0 GPR0
#define _SDR1 GPR3
#define _PTCR GPR3
#define _RPR GPR4
@@ -272,6 +273,14 @@
b pnv_wakeup_noloss
.Lhandle_esl_ec_set:
+ /*
+ * POWER9 DD2 can incorrectly set PMAO when waking up after a
+ * state-loss idle. Saving and restoring MMCR0 over idle is a
+ * workaround.
+ */
+ mfspr r4,SPRN_MMCR0
+ std r4,_MMCR0(r1)
+
/*
* Check if the requested state is a deep idle state.
*/
@@ -450,10 +459,20 @@
pnv_restore_hyp_resource_arch300:
/*
* Workaround for POWER9, if we lost resources, the ERAT
- * might have been mixed up and needs flushing.
+ * might have been mixed up and needs flushing. We also need
+ * to reload MMCR0 (see comment above). We also need to set
+ * then clear bit 60 in MMCRA to ensure the PMU starts running.
*/
blt cr3,1f
PPC_INVALIDATE_ERAT
+ ld r1,PACAR1(r13)
+ mfspr r4,SPRN_MMCRA
+ ori r4,r4,(1 << (63-60))
+ mtspr SPRN_MMCRA,r4
+ xori r4,r4,(1 << (63-60))
+ mtspr SPRN_MMCRA,r4
+ ld r4,_MMCR0(r1)
+ mtspr SPRN_MMCR0,r4
1:
/*
* POWER ISA 3. Use PSSCR to determine if we
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 0bcec74..f291f78 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -145,6 +145,19 @@
/* Clear bit 0 which we wouldn't clear otherwise */
local_paca->irq_happened &= ~PACA_IRQ_HARD_DIS;
+ if (happened & PACA_IRQ_HARD_DIS) {
+ /*
+ * We may have missed a decrementer interrupt if hard disabled.
+ * Check the decrementer register in case we had a rollover
+ * while hard disabled.
+ */
+ if (!(happened & PACA_IRQ_DEC)) {
+ if (decrementer_check_overflow()) {
+ local_paca->irq_happened |= PACA_IRQ_DEC;
+ happened |= PACA_IRQ_DEC;
+ }
+ }
+ }
/*
* Force the delivery of pending soft-disabled interrupts on PS3.
@@ -170,7 +183,7 @@
* in case we also had a rollover while hard disabled
*/
local_paca->irq_happened &= ~PACA_IRQ_DEC;
- if ((happened & PACA_IRQ_DEC) || decrementer_check_overflow())
+ if (happened & PACA_IRQ_DEC)
return 0x900;
/* Finally check if an external interrupt happened */
diff --git a/arch/powerpc/kernel/kvm.c b/arch/powerpc/kernel/kvm.c
index 9ad37f8..1086ea3 100644
--- a/arch/powerpc/kernel/kvm.c
+++ b/arch/powerpc/kernel/kvm.c
@@ -25,6 +25,7 @@
#include <linux/kvm_para.h>
#include <linux/slab.h>
#include <linux/of.h>
+#include <linux/nmi.h> /* hardlockup_detector_disable() */
#include <asm/reg.h>
#include <asm/sections.h>
@@ -718,6 +719,12 @@
static int __init kvm_guest_init(void)
{
+ /*
+ * The hardlockup detector is likely to get false positives in
+ * KVM guests, so disable it by default.
+ */
+ hardlockup_detector_disable();
+
if (!kvm_para_available())
goto free_tmp;
diff --git a/arch/powerpc/kernel/mce_power.c b/arch/powerpc/kernel/mce_power.c
index d24e689..b76ca19 100644
--- a/arch/powerpc/kernel/mce_power.c
+++ b/arch/powerpc/kernel/mce_power.c
@@ -53,6 +53,60 @@
asm volatile("ptesync" : : : "memory");
}
+static void flush_tlb_300(unsigned int num_sets, unsigned int action)
+{
+ unsigned long rb;
+ unsigned int i;
+ unsigned int r;
+
+ switch (action) {
+ case TLB_INVAL_SCOPE_GLOBAL:
+ rb = TLBIEL_INVAL_SET;
+ break;
+ case TLB_INVAL_SCOPE_LPID:
+ rb = TLBIEL_INVAL_SET_LPID;
+ break;
+ default:
+ BUG();
+ break;
+ }
+
+ asm volatile("ptesync" : : : "memory");
+
+ if (early_radix_enabled())
+ r = 1;
+ else
+ r = 0;
+
+ /*
+ * First flush table/PWC caches with set 0, then flush the
+ * rest of the sets, partition scope. Radix must then do it
+ * all again with process scope. Hash just has to flush
+ * process table.
+ */
+ asm volatile(PPC_TLBIEL(%0, %1, %2, %3, %4) : :
+ "r"(rb), "r"(0), "i"(2), "i"(0), "r"(r));
+ for (i = 1; i < num_sets; i++) {
+ unsigned long set = i * (1<<TLBIEL_INVAL_SET_SHIFT);
+
+ asm volatile(PPC_TLBIEL(%0, %1, %2, %3, %4) : :
+ "r"(rb+set), "r"(0), "i"(2), "i"(0), "r"(r));
+ }
+
+ asm volatile(PPC_TLBIEL(%0, %1, %2, %3, %4) : :
+ "r"(rb), "r"(0), "i"(2), "i"(1), "r"(r));
+ if (early_radix_enabled()) {
+ for (i = 1; i < num_sets; i++) {
+ unsigned long set = i * (1<<TLBIEL_INVAL_SET_SHIFT);
+
+ asm volatile(PPC_TLBIEL(%0, %1, %2, %3, %4) : :
+ "r"(rb+set), "r"(0), "i"(2), "i"(1), "r"(r));
+ }
+ }
+
+ asm volatile("ptesync" : : : "memory");
+}
+
/*
* Generic routines to flush TLB on POWER processors. These routines
* are used as flush_tlb hook in the cpu_spec.
@@ -79,7 +133,7 @@
else
num_sets = POWER9_TLB_SETS_HASH;
- flush_tlb_206(num_sets, action);
+ flush_tlb_300(num_sets, action);
}
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index c119044..8ac0bd2 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -614,6 +614,18 @@
li r0,0
std r0,16(r1)
+BEGIN_FTR_SECTION
+ /*
+ * This is the best time to turn AMR/IAMR off.
+ * key 0 is used in radix for supervisor<->user
+ * protection, but on hash key 0 is reserved
+ * ideally we want to enter with a clean state.
+ * NOTE, we rely on r0 being 0 from above.
+ */
+ mtspr SPRN_IAMR,r0
+ mtspr SPRN_AMOR,r0
+END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
+
/* save regs for local vars on new stack.
* yes, we won't go back, but ...
*/
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index dd8a04f..613f79f 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -15,6 +15,9 @@
#undef DEBUG_PROM
+/* we cannot use FORTIFY as it brings in new symbols */
+#define __NO_FORTIFY
+
#include <stdarg.h>
#include <linux/kernel.h>
#include <linux/string.h>
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 925a4ef..660ed39 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -127,12 +127,19 @@
* If task is not current, it will have been flushed already to
* it's thread_struct during __switch_to().
*
- * A reclaim flushes ALL the state.
+ * A reclaim flushes ALL the state or if not in TM save TM SPRs
+ * in the appropriate thread structures from live.
*/
- if (tsk == current && MSR_TM_SUSPENDED(mfmsr()))
- tm_reclaim_current(TM_CAUSE_SIGNAL);
+ if (tsk != current)
+ return;
+ if (MSR_TM_SUSPENDED(mfmsr())) {
+ tm_reclaim_current(TM_CAUSE_SIGNAL);
+ } else {
+ tm_enable();
+ tm_save_sprs(&(tsk->thread));
+ }
}
#else
static inline void flush_tmregs_to_thread(struct task_struct *tsk) { }
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 4640f6d..af23d4b 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -751,22 +751,3 @@
struct ppc_pci_io ppc_pci_io;
EXPORT_SYMBOL(ppc_pci_io);
#endif
-
-#ifdef CONFIG_HARDLOCKUP_DETECTOR
-u64 hw_nmi_get_sample_period(int watchdog_thresh)
-{
- return ppc_proc_freq * watchdog_thresh;
-}
-
-/*
- * The hardlockup detector breaks PMU event based branches and is likely
- * to get false positives in KVM guests, so disable it by default.
- */
-static int __init disable_hardlockup_detector(void)
-{
- hardlockup_detector_disable();
-
- return 0;
-}
-early_initcall(disable_hardlockup_detector);
-#endif
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index c6b8bac..cf0e124 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -435,13 +435,31 @@
}
}
+void smp_flush_nmi_ipi(u64 delay_us)
+{
+ unsigned long flags;
+
+ nmi_ipi_lock_start(&flags);
+ while (nmi_ipi_busy_count) {
+ nmi_ipi_unlock_end(&flags);
+ udelay(1);
+ if (delay_us) {
+ delay_us--;
+ if (!delay_us)
+ return;
+ }
+ nmi_ipi_lock_start(&flags);
+ }
+ nmi_ipi_unlock_end(&flags);
+}
+
/*
* - cpu is the target CPU (must not be this CPU), or NMI_IPI_ALL_OTHERS.
* - fn is the target callback function.
* - delay_us > 0 is the delay before giving up waiting for targets to
* enter the handler, == 0 specifies indefinite delay.
*/
-static int smp_send_nmi_ipi(int cpu, void (*fn)(struct pt_regs *), u64 delay_us)
+int smp_send_nmi_ipi(int cpu, void (*fn)(struct pt_regs *), u64 delay_us)
{
unsigned long flags;
int me = raw_smp_processor_id();
@@ -985,21 +1003,13 @@
{ NULL, },
};
-static __init long smp_setup_cpu_workfn(void *data __always_unused)
-{
- smp_ops->setup_cpu(boot_cpuid);
- return 0;
-}
-
void __init smp_cpus_done(unsigned int max_cpus)
{
/*
- * We want the setup_cpu() here to be called on the boot CPU, but
- * init might run on any CPU, so make sure it's invoked on the boot
- * CPU.
+ * We are running pinned to the boot CPU, see rest_init().
*/
if (smp_ops && smp_ops->setup_cpu)
- work_on_cpu_safe(boot_cpuid, smp_setup_cpu_workfn, NULL);
+ smp_ops->setup_cpu(boot_cpuid);
if (smp_ops && smp_ops->bringup_done)
smp_ops->bringup_done();
diff --git a/arch/powerpc/kernel/watchdog.c b/arch/powerpc/kernel/watchdog.c
new file mode 100644
index 0000000..b67f8b0
--- /dev/null
+++ b/arch/powerpc/kernel/watchdog.c
@@ -0,0 +1,386 @@
+/*
+ * Watchdog support on powerpc systems.
+ *
+ * Copyright 2017, IBM Corporation.
+ *
+ * This uses code from arch/sparc/kernel/nmi.c and kernel/watchdog.c
+ */
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/percpu.h>
+#include <linux/cpu.h>
+#include <linux/nmi.h>
+#include <linux/module.h>
+#include <linux/export.h>
+#include <linux/kprobes.h>
+#include <linux/hardirq.h>
+#include <linux/reboot.h>
+#include <linux/slab.h>
+#include <linux/kdebug.h>
+#include <linux/sched/debug.h>
+#include <linux/delay.h>
+#include <linux/smp.h>
+
+#include <asm/paca.h>
+
+/*
+ * The watchdog has a simple timer that runs on each CPU, once per timer
+ * period. This is the heartbeat.
+ *
+ * Then there are checks to see if the heartbeat has not triggered on a CPU
+ * for the panic timeout period. Currently the watchdog only supports an
+ * SMP check, so the heartbeat only turns on when we have 2 or more CPUs.
+ *
+ * This is not an NMI watchdog, but Linux uses that name for a generic
+ * watchdog in some cases, so NMI gets used in some places.
+ */
+
+static cpumask_t wd_cpus_enabled __read_mostly;
+
+static u64 wd_panic_timeout_tb __read_mostly; /* timebase ticks until panic */
+static u64 wd_smp_panic_timeout_tb __read_mostly; /* panic other CPUs */
+
+static u64 wd_timer_period_ms __read_mostly; /* interval between heartbeat */
+
+static DEFINE_PER_CPU(struct timer_list, wd_timer);
+static DEFINE_PER_CPU(u64, wd_timer_tb);
+
+/*
+ * These are for the SMP checker. CPUs clear their pending bit in their
+ * heartbeat. If the bitmask becomes empty, the time is noted and the
+ * bitmask is refilled.
+ *
+ * All CPUs clear their bit in the pending mask every timer period.
+ * Once all have cleared, the time is noted and the bits are reset.
+ * If the time since all clear was greater than the panic timeout,
+ * we can panic with the list of stuck CPUs.
+ *
+ * This will work best with NMI IPIs for crash code so the stuck CPUs
+ * can be pulled out to get their backtraces.
+ */
+static unsigned long __wd_smp_lock;
+static cpumask_t wd_smp_cpus_pending;
+static cpumask_t wd_smp_cpus_stuck;
+static u64 wd_smp_last_reset_tb;
+
+static inline void wd_smp_lock(unsigned long *flags)
+{
+ /*
+ * Avoid locking layers if possible.
+ * This may be called from low level interrupt handlers at some
+ * point in future.
+ */
+ local_irq_save(*flags);
+ while (unlikely(test_and_set_bit_lock(0, &__wd_smp_lock)))
+ cpu_relax();
+}
+
+static inline void wd_smp_unlock(unsigned long *flags)
+{
+ clear_bit_unlock(0, &__wd_smp_lock);
+ local_irq_restore(*flags);
+}
+
+static void wd_lockup_ipi(struct pt_regs *regs)
+{
+ pr_emerg("Watchdog CPU:%d Hard LOCKUP\n", raw_smp_processor_id());
+ print_modules();
+ print_irqtrace_events(current);
+ if (regs)
+ show_regs(regs);
+ else
+ dump_stack();
+
+ if (hardlockup_panic)
+ nmi_panic(regs, "Hard LOCKUP");
+}
+
+static void set_cpu_stuck(int cpu, u64 tb)
+{
+ cpumask_set_cpu(cpu, &wd_smp_cpus_stuck);
+ cpumask_clear_cpu(cpu, &wd_smp_cpus_pending);
+ if (cpumask_empty(&wd_smp_cpus_pending)) {
+ wd_smp_last_reset_tb = tb;
+ cpumask_andnot(&wd_smp_cpus_pending,
+ &wd_cpus_enabled,
+ &wd_smp_cpus_stuck);
+ }
+}
+
+static void watchdog_smp_panic(int cpu, u64 tb)
+{
+ unsigned long flags;
+ int c;
+
+ wd_smp_lock(&flags);
+ /* Double check some things under lock */
+ if ((s64)(tb - wd_smp_last_reset_tb) < (s64)wd_smp_panic_timeout_tb)
+ goto out;
+ if (cpumask_test_cpu(cpu, &wd_smp_cpus_pending))
+ goto out;
+ if (cpumask_weight(&wd_smp_cpus_pending) == 0)
+ goto out;
+
+ pr_emerg("Watchdog CPU:%d detected Hard LOCKUP other CPUS:%*pbl\n",
+ cpu, cpumask_pr_args(&wd_smp_cpus_pending));
+
+ /*
+ * Try to trigger the stuck CPUs.
+ */
+ for_each_cpu(c, &wd_smp_cpus_pending) {
+ if (c == cpu)
+ continue;
+ smp_send_nmi_ipi(c, wd_lockup_ipi, 1000000);
+ }
+ smp_flush_nmi_ipi(1000000);
+
+ /* Take the stuck CPU out of the watch group */
+ for_each_cpu(c, &wd_smp_cpus_pending)
+ set_cpu_stuck(c, tb);
+
+out:
+ wd_smp_unlock(&flags);
+
+ printk_safe_flush();
+ /*
+ * printk_safe_flush() seems to require another print
+ * before anything actually goes out to console.
+ */
+ if (sysctl_hardlockup_all_cpu_backtrace)
+ trigger_allbutself_cpu_backtrace();
+
+ if (hardlockup_panic)
+ nmi_panic(NULL, "Hard LOCKUP");
+}
+
+static void wd_smp_clear_cpu_pending(int cpu, u64 tb)
+{
+ if (!cpumask_test_cpu(cpu, &wd_smp_cpus_pending)) {
+ if (unlikely(cpumask_test_cpu(cpu, &wd_smp_cpus_stuck))) {
+ unsigned long flags;
+
+ pr_emerg("Watchdog CPU:%d became unstuck\n", cpu);
+ wd_smp_lock(&flags);
+ cpumask_clear_cpu(cpu, &wd_smp_cpus_stuck);
+ wd_smp_unlock(&flags);
+ }
+ return;
+ }
+ cpumask_clear_cpu(cpu, &wd_smp_cpus_pending);
+ if (cpumask_empty(&wd_smp_cpus_pending)) {
+ unsigned long flags;
+
+ wd_smp_lock(&flags);
+ if (cpumask_empty(&wd_smp_cpus_pending)) {
+ wd_smp_last_reset_tb = tb;
+ cpumask_andnot(&wd_smp_cpus_pending,
+ &wd_cpus_enabled,
+ &wd_smp_cpus_stuck);
+ }
+ wd_smp_unlock(&flags);
+ }
+}
+
+static void watchdog_timer_interrupt(int cpu)
+{
+ u64 tb = get_tb();
+
+ per_cpu(wd_timer_tb, cpu) = tb;
+
+ wd_smp_clear_cpu_pending(cpu, tb);
+
+ if ((s64)(tb - wd_smp_last_reset_tb) >= (s64)wd_smp_panic_timeout_tb)
+ watchdog_smp_panic(cpu, tb);
+}
+
+void soft_nmi_interrupt(struct pt_regs *regs)
+{
+ unsigned long flags;
+ int cpu = raw_smp_processor_id();
+ u64 tb;
+
+ if (!cpumask_test_cpu(cpu, &wd_cpus_enabled))
+ return;
+
+ nmi_enter();
+ tb = get_tb();
+ if (tb - per_cpu(wd_timer_tb, cpu) >= wd_panic_timeout_tb) {
+ per_cpu(wd_timer_tb, cpu) = tb;
+
+ wd_smp_lock(&flags);
+ if (cpumask_test_cpu(cpu, &wd_smp_cpus_stuck)) {
+ wd_smp_unlock(&flags);
+ goto out;
+ }
+ set_cpu_stuck(cpu, tb);
+
+ pr_emerg("Watchdog CPU:%d Hard LOCKUP\n", cpu);
+ print_modules();
+ print_irqtrace_events(current);
+ if (regs)
+ show_regs(regs);
+ else
+ dump_stack();
+
+ wd_smp_unlock(&flags);
+
+ if (sysctl_hardlockup_all_cpu_backtrace)
+ trigger_allbutself_cpu_backtrace();
+
+ if (hardlockup_panic)
+ nmi_panic(regs, "Hard LOCKUP");
+ }
+ if (wd_panic_timeout_tb < 0x7fffffff)
+ mtspr(SPRN_DEC, wd_panic_timeout_tb);
+
+out:
+ nmi_exit();
+}
+
+static void wd_timer_reset(unsigned int cpu, struct timer_list *t)
+{
+ t->expires = jiffies + msecs_to_jiffies(wd_timer_period_ms);
+ if (wd_timer_period_ms > 1000)
+ t->expires = __round_jiffies_up(t->expires, cpu);
+ add_timer_on(t, cpu);
+}
+
+static void wd_timer_fn(unsigned long data)
+{
+ struct timer_list *t = this_cpu_ptr(&wd_timer);
+ int cpu = smp_processor_id();
+
+ watchdog_timer_interrupt(cpu);
+
+ wd_timer_reset(cpu, t);
+}
+
+void arch_touch_nmi_watchdog(void)
+{
+ int cpu = smp_processor_id();
+
+ watchdog_timer_interrupt(cpu);
+}
+EXPORT_SYMBOL(arch_touch_nmi_watchdog);
+
+static void start_watchdog_timer_on(unsigned int cpu)
+{
+ struct timer_list *t = per_cpu_ptr(&wd_timer, cpu);
+
+ per_cpu(wd_timer_tb, cpu) = get_tb();
+
+ setup_pinned_timer(t, wd_timer_fn, 0);
+ wd_timer_reset(cpu, t);
+}
+
+static void stop_watchdog_timer_on(unsigned int cpu)
+{
+ struct timer_list *t = per_cpu_ptr(&wd_timer, cpu);
+
+ del_timer_sync(t);
+}
+
+static int start_wd_on_cpu(unsigned int cpu)
+{
+ if (cpumask_test_cpu(cpu, &wd_cpus_enabled)) {
+ WARN_ON(1);
+ return 0;
+ }
+
+ if (!(watchdog_enabled & NMI_WATCHDOG_ENABLED))
+ return 0;
+
+ if (watchdog_suspended)
+ return 0;
+
+ if (!cpumask_test_cpu(cpu, &watchdog_cpumask))
+ return 0;
+
+ cpumask_set_cpu(cpu, &wd_cpus_enabled);
+ if (cpumask_weight(&wd_cpus_enabled) == 1) {
+ cpumask_set_cpu(cpu, &wd_smp_cpus_pending);
+ wd_smp_last_reset_tb = get_tb();
+ }
+ smp_wmb();
+ start_watchdog_timer_on(cpu);
+
+ return 0;
+}
+
+static int stop_wd_on_cpu(unsigned int cpu)
+{
+ if (!cpumask_test_cpu(cpu, &wd_cpus_enabled))
+ return 0; /* Can happen in CPU unplug case */
+
+ stop_watchdog_timer_on(cpu);
+
+ cpumask_clear_cpu(cpu, &wd_cpus_enabled);
+ wd_smp_clear_cpu_pending(cpu, get_tb());
+
+ return 0;
+}
+
+static void watchdog_calc_timeouts(void)
+{
+ wd_panic_timeout_tb = watchdog_thresh * ppc_tb_freq;
+
+ /* Have the SMP detector trigger a bit later */
+ wd_smp_panic_timeout_tb = wd_panic_timeout_tb * 3 / 2;
+
+ /* 2/5 is the factor that the perf based detector uses */
+ wd_timer_period_ms = watchdog_thresh * 1000 * 2 / 5;
+}
+
+void watchdog_nmi_reconfigure(void)
+{
+ int cpu;
+
+ watchdog_calc_timeouts();
+
+ for_each_cpu(cpu, &wd_cpus_enabled)
+ stop_wd_on_cpu(cpu);
+
+ for_each_cpu_and(cpu, cpu_online_mask, &watchdog_cpumask)
+ start_wd_on_cpu(cpu);
+}
+
+/*
+ * This runs after lockup_detector_init() which sets up watchdog_cpumask.
+ */
+static int __init powerpc_watchdog_init(void)
+{
+ int err;
+
+ watchdog_calc_timeouts();
+
+ err = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "powerpc/watchdog:online",
+ start_wd_on_cpu, stop_wd_on_cpu);
+ if (err < 0)
+ pr_warn("Watchdog could not be initialized");
+
+ return 0;
+}
+arch_initcall(powerpc_watchdog_init);
+
+static void handle_backtrace_ipi(struct pt_regs *regs)
+{
+ nmi_cpu_backtrace(regs);
+}
+
+static void raise_backtrace_ipi(cpumask_t *mask)
+{
+ unsigned int cpu;
+
+ for_each_cpu(cpu, mask) {
+ if (cpu == smp_processor_id())
+ handle_backtrace_ipi(NULL);
+ else
+ smp_send_nmi_ipi(cpu, handle_backtrace_ipi, 1000000);
+ }
+}
+
+void arch_trigger_cpumask_backtrace(const cpumask_t *mask, bool exclude_self)
+{
+ nmi_trigger_cpumask_backtrace(mask, exclude_self, raise_backtrace_ipi);
+}
diff --git a/arch/powerpc/kvm/book3s_64_mmu_hv.c b/arch/powerpc/kvm/book3s_64_mmu_hv.c
index 710e491..b42812e 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_hv.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_hv.c
@@ -93,7 +93,7 @@
}
if (!hpt)
- hpt = __get_free_pages(GFP_KERNEL|__GFP_ZERO|__GFP_REPEAT
+ hpt = __get_free_pages(GFP_KERNEL|__GFP_ZERO|__GFP_RETRY_MAYFAIL
|__GFP_NOWARN, order - PAGE_SHIFT);
if (!hpt)
@@ -164,8 +164,10 @@
goto out;
}
- if (kvm->arch.hpt.virt)
+ if (kvm->arch.hpt.virt) {
kvmppc_free_hpt(&kvm->arch.hpt);
+ kvmppc_rmap_reset(kvm);
+ }
err = kvmppc_allocate_hpt(&info, order);
if (err < 0)
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 0b436df..359c79c 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -3211,6 +3211,8 @@
run->fail_entry.hardware_entry_failure_reason = 0;
return -EINVAL;
}
+ /* Enable TM so we can read the TM SPRs */
+ mtmsr(mfmsr() | MSR_TM);
current->thread.tm_tfhar = mfspr(SPRN_TFHAR);
current->thread.tm_tfiar = mfspr(SPRN_TFIAR);
current->thread.tm_texasr = mfspr(SPRN_TEXASR);
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index cb44065..c52184a 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -1443,12 +1443,14 @@
ori r6,r6,1
mtspr SPRN_CTRLT,r6
4:
- /* Read the guest SLB and save it away */
+ /* Check if we are running hash or radix and store it in cr2 */
ld r5, VCPU_KVM(r9)
lbz r0, KVM_RADIX(r5)
- cmpwi r0, 0
+ cmpwi cr2,r0,0
+
+ /* Read the guest SLB and save it away */
li r5, 0
- bne 3f /* for radix, save 0 entries */
+ bne cr2, 3f /* for radix, save 0 entries */
lwz r0,VCPU_SLB_NR(r9) /* number of entries in SLB */
mtctr r0
li r6,0
@@ -1712,11 +1714,6 @@
END_FTR_SECTION_NESTED(CPU_FTR_ARCH_300, 0, 96)
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
22:
- /* Clear out SLB */
- li r5,0
- slbmte r5,r5
- slbia
- ptesync
/* Restore host values of some registers */
BEGIN_FTR_SECTION
@@ -1737,10 +1734,56 @@
mtspr SPRN_PID, r7
mtspr SPRN_IAMR, r8
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
+
+#ifdef CONFIG_PPC_RADIX_MMU
+ /*
+ * Are we running hash or radix ?
+ */
+ beq cr2,3f
+
+ /* Radix: Handle the case where the guest used an illegal PID */
+ LOAD_REG_ADDR(r4, mmu_base_pid)
+ lwz r3, VCPU_GUEST_PID(r9)
+ lwz r5, 0(r4)
+ cmpw cr0,r3,r5
+ blt 2f
+
+ /*
+ * Illegal PID, the HW might have prefetched and cached in the TLB
+ * some translations for the LPID 0 / guest PID combination which
+ * Linux doesn't know about, so we need to flush that PID out of
+ * the TLB. First we need to set LPIDR to 0 so tlbiel applies to
+ * the right context.
+ */
+ li r0,0
+ mtspr SPRN_LPID,r0
+ isync
+
+ /* Then do a congruence class local flush */
+ ld r6,VCPU_KVM(r9)
+ lwz r0,KVM_TLB_SETS(r6)
+ mtctr r0
+ li r7,0x400 /* IS field = 0b01 */
+ ptesync
+ sldi r0,r3,32 /* RS has PID */
+1: PPC_TLBIEL(7,0,2,1,1) /* RIC=2, PRS=1, R=1 */
+ addi r7,r7,0x1000
+ bdnz 1b
+ ptesync
+
+2: /* Flush the ERAT on radix P9 DD1 guest exit */
BEGIN_FTR_SECTION
PPC_INVALIDATE_ERAT
END_FTR_SECTION_IFSET(CPU_FTR_POWER9_DD1)
+ b 4f
+#endif /* CONFIG_PPC_RADIX_MMU */
+ /* Hash: clear out SLB */
+3: li r5,0
+ slbmte r5,r5
+ slbia
+ ptesync
+4:
/*
* POWER7/POWER8 guest -> host partition switch code.
* We don't have to lock against tlbies but we do
diff --git a/arch/powerpc/lib/feature-fixups.c b/arch/powerpc/lib/feature-fixups.c
index f391770..41cf5ae 100644
--- a/arch/powerpc/lib/feature-fixups.c
+++ b/arch/powerpc/lib/feature-fixups.c
@@ -233,192 +233,192 @@
static void test_basic_patching(void)
{
- extern unsigned int ftr_fixup_test1;
- extern unsigned int end_ftr_fixup_test1;
- extern unsigned int ftr_fixup_test1_orig;
- extern unsigned int ftr_fixup_test1_expected;
- int size = &end_ftr_fixup_test1 - &ftr_fixup_test1;
+ extern unsigned int ftr_fixup_test1[];
+ extern unsigned int end_ftr_fixup_test1[];
+ extern unsigned int ftr_fixup_test1_orig[];
+ extern unsigned int ftr_fixup_test1_expected[];
+ int size = end_ftr_fixup_test1 - ftr_fixup_test1;
fixup.value = fixup.mask = 8;
- fixup.start_off = calc_offset(&fixup, &ftr_fixup_test1 + 1);
- fixup.end_off = calc_offset(&fixup, &ftr_fixup_test1 + 2);
+ fixup.start_off = calc_offset(&fixup, ftr_fixup_test1 + 1);
+ fixup.end_off = calc_offset(&fixup, ftr_fixup_test1 + 2);
fixup.alt_start_off = fixup.alt_end_off = 0;
/* Sanity check */
- check(memcmp(&ftr_fixup_test1, &ftr_fixup_test1_orig, size) == 0);
+ check(memcmp(ftr_fixup_test1, ftr_fixup_test1_orig, size) == 0);
/* Check we don't patch if the value matches */
patch_feature_section(8, &fixup);
- check(memcmp(&ftr_fixup_test1, &ftr_fixup_test1_orig, size) == 0);
+ check(memcmp(ftr_fixup_test1, ftr_fixup_test1_orig, size) == 0);
/* Check we do patch if the value doesn't match */
patch_feature_section(0, &fixup);
- check(memcmp(&ftr_fixup_test1, &ftr_fixup_test1_expected, size) == 0);
+ check(memcmp(ftr_fixup_test1, ftr_fixup_test1_expected, size) == 0);
/* Check we do patch if the mask doesn't match */
- memcpy(&ftr_fixup_test1, &ftr_fixup_test1_orig, size);
- check(memcmp(&ftr_fixup_test1, &ftr_fixup_test1_orig, size) == 0);
+ memcpy(ftr_fixup_test1, ftr_fixup_test1_orig, size);
+ check(memcmp(ftr_fixup_test1, ftr_fixup_test1_orig, size) == 0);
patch_feature_section(~8, &fixup);
- check(memcmp(&ftr_fixup_test1, &ftr_fixup_test1_expected, size) == 0);
+ check(memcmp(ftr_fixup_test1, ftr_fixup_test1_expected, size) == 0);
}
static void test_alternative_patching(void)
{
- extern unsigned int ftr_fixup_test2;
- extern unsigned int end_ftr_fixup_test2;
- extern unsigned int ftr_fixup_test2_orig;
- extern unsigned int ftr_fixup_test2_alt;
- extern unsigned int ftr_fixup_test2_expected;
- int size = &end_ftr_fixup_test2 - &ftr_fixup_test2;
+ extern unsigned int ftr_fixup_test2[];
+ extern unsigned int end_ftr_fixup_test2[];
+ extern unsigned int ftr_fixup_test2_orig[];
+ extern unsigned int ftr_fixup_test2_alt[];
+ extern unsigned int ftr_fixup_test2_expected[];
+ int size = end_ftr_fixup_test2 - ftr_fixup_test2;
fixup.value = fixup.mask = 0xF;
- fixup.start_off = calc_offset(&fixup, &ftr_fixup_test2 + 1);
- fixup.end_off = calc_offset(&fixup, &ftr_fixup_test2 + 2);
- fixup.alt_start_off = calc_offset(&fixup, &ftr_fixup_test2_alt);
- fixup.alt_end_off = calc_offset(&fixup, &ftr_fixup_test2_alt + 1);
+ fixup.start_off = calc_offset(&fixup, ftr_fixup_test2 + 1);
+ fixup.end_off = calc_offset(&fixup, ftr_fixup_test2 + 2);
+ fixup.alt_start_off = calc_offset(&fixup, ftr_fixup_test2_alt);
+ fixup.alt_end_off = calc_offset(&fixup, ftr_fixup_test2_alt + 1);
/* Sanity check */
- check(memcmp(&ftr_fixup_test2, &ftr_fixup_test2_orig, size) == 0);
+ check(memcmp(ftr_fixup_test2, ftr_fixup_test2_orig, size) == 0);
/* Check we don't patch if the value matches */
patch_feature_section(0xF, &fixup);
- check(memcmp(&ftr_fixup_test2, &ftr_fixup_test2_orig, size) == 0);
+ check(memcmp(ftr_fixup_test2, ftr_fixup_test2_orig, size) == 0);
/* Check we do patch if the value doesn't match */
patch_feature_section(0, &fixup);
- check(memcmp(&ftr_fixup_test2, &ftr_fixup_test2_expected, size) == 0);
+ check(memcmp(ftr_fixup_test2, ftr_fixup_test2_expected, size) == 0);
/* Check we do patch if the mask doesn't match */
- memcpy(&ftr_fixup_test2, &ftr_fixup_test2_orig, size);
- check(memcmp(&ftr_fixup_test2, &ftr_fixup_test2_orig, size) == 0);
+ memcpy(ftr_fixup_test2, ftr_fixup_test2_orig, size);
+ check(memcmp(ftr_fixup_test2, ftr_fixup_test2_orig, size) == 0);
patch_feature_section(~0xF, &fixup);
- check(memcmp(&ftr_fixup_test2, &ftr_fixup_test2_expected, size) == 0);
+ check(memcmp(ftr_fixup_test2, ftr_fixup_test2_expected, size) == 0);
}
static void test_alternative_case_too_big(void)
{
- extern unsigned int ftr_fixup_test3;
- extern unsigned int end_ftr_fixup_test3;
- extern unsigned int ftr_fixup_test3_orig;
- extern unsigned int ftr_fixup_test3_alt;
- int size = &end_ftr_fixup_test3 - &ftr_fixup_test3;
+ extern unsigned int ftr_fixup_test3[];
+ extern unsigned int end_ftr_fixup_test3[];
+ extern unsigned int ftr_fixup_test3_orig[];
+ extern unsigned int ftr_fixup_test3_alt[];
+ int size = end_ftr_fixup_test3 - ftr_fixup_test3;
fixup.value = fixup.mask = 0xC;
- fixup.start_off = calc_offset(&fixup, &ftr_fixup_test3 + 1);
- fixup.end_off = calc_offset(&fixup, &ftr_fixup_test3 + 2);
- fixup.alt_start_off = calc_offset(&fixup, &ftr_fixup_test3_alt);
- fixup.alt_end_off = calc_offset(&fixup, &ftr_fixup_test3_alt + 2);
+ fixup.start_off = calc_offset(&fixup, ftr_fixup_test3 + 1);
+ fixup.end_off = calc_offset(&fixup, ftr_fixup_test3 + 2);
+ fixup.alt_start_off = calc_offset(&fixup, ftr_fixup_test3_alt);
+ fixup.alt_end_off = calc_offset(&fixup, ftr_fixup_test3_alt + 2);
/* Sanity check */
- check(memcmp(&ftr_fixup_test3, &ftr_fixup_test3_orig, size) == 0);
+ check(memcmp(ftr_fixup_test3, ftr_fixup_test3_orig, size) == 0);
/* Expect nothing to be patched, and the error returned to us */
check(patch_feature_section(0xF, &fixup) == 1);
- check(memcmp(&ftr_fixup_test3, &ftr_fixup_test3_orig, size) == 0);
+ check(memcmp(ftr_fixup_test3, ftr_fixup_test3_orig, size) == 0);
check(patch_feature_section(0, &fixup) == 1);
- check(memcmp(&ftr_fixup_test3, &ftr_fixup_test3_orig, size) == 0);
+ check(memcmp(ftr_fixup_test3, ftr_fixup_test3_orig, size) == 0);
check(patch_feature_section(~0xF, &fixup) == 1);
- check(memcmp(&ftr_fixup_test3, &ftr_fixup_test3_orig, size) == 0);
+ check(memcmp(ftr_fixup_test3, ftr_fixup_test3_orig, size) == 0);
}
static void test_alternative_case_too_small(void)
{
- extern unsigned int ftr_fixup_test4;
- extern unsigned int end_ftr_fixup_test4;
- extern unsigned int ftr_fixup_test4_orig;
- extern unsigned int ftr_fixup_test4_alt;
- extern unsigned int ftr_fixup_test4_expected;
- int size = &end_ftr_fixup_test4 - &ftr_fixup_test4;
+ extern unsigned int ftr_fixup_test4[];
+ extern unsigned int end_ftr_fixup_test4[];
+ extern unsigned int ftr_fixup_test4_orig[];
+ extern unsigned int ftr_fixup_test4_alt[];
+ extern unsigned int ftr_fixup_test4_expected[];
+ int size = end_ftr_fixup_test4 - ftr_fixup_test4;
unsigned long flag;
/* Check a high-bit flag */
flag = 1UL << ((sizeof(unsigned long) - 1) * 8);
fixup.value = fixup.mask = flag;
- fixup.start_off = calc_offset(&fixup, &ftr_fixup_test4 + 1);
- fixup.end_off = calc_offset(&fixup, &ftr_fixup_test4 + 5);
- fixup.alt_start_off = calc_offset(&fixup, &ftr_fixup_test4_alt);
- fixup.alt_end_off = calc_offset(&fixup, &ftr_fixup_test4_alt + 2);
+ fixup.start_off = calc_offset(&fixup, ftr_fixup_test4 + 1);
+ fixup.end_off = calc_offset(&fixup, ftr_fixup_test4 + 5);
+ fixup.alt_start_off = calc_offset(&fixup, ftr_fixup_test4_alt);
+ fixup.alt_end_off = calc_offset(&fixup, ftr_fixup_test4_alt + 2);
/* Sanity check */
- check(memcmp(&ftr_fixup_test4, &ftr_fixup_test4_orig, size) == 0);
+ check(memcmp(ftr_fixup_test4, ftr_fixup_test4_orig, size) == 0);
/* Check we don't patch if the value matches */
patch_feature_section(flag, &fixup);
- check(memcmp(&ftr_fixup_test4, &ftr_fixup_test4_orig, size) == 0);
+ check(memcmp(ftr_fixup_test4, ftr_fixup_test4_orig, size) == 0);
/* Check we do patch if the value doesn't match */
patch_feature_section(0, &fixup);
- check(memcmp(&ftr_fixup_test4, &ftr_fixup_test4_expected, size) == 0);
+ check(memcmp(ftr_fixup_test4, ftr_fixup_test4_expected, size) == 0);
/* Check we do patch if the mask doesn't match */
- memcpy(&ftr_fixup_test4, &ftr_fixup_test4_orig, size);
- check(memcmp(&ftr_fixup_test4, &ftr_fixup_test4_orig, size) == 0);
+ memcpy(ftr_fixup_test4, ftr_fixup_test4_orig, size);
+ check(memcmp(ftr_fixup_test4, ftr_fixup_test4_orig, size) == 0);
patch_feature_section(~flag, &fixup);
- check(memcmp(&ftr_fixup_test4, &ftr_fixup_test4_expected, size) == 0);
+ check(memcmp(ftr_fixup_test4, ftr_fixup_test4_expected, size) == 0);
}
static void test_alternative_case_with_branch(void)
{
- extern unsigned int ftr_fixup_test5;
- extern unsigned int end_ftr_fixup_test5;
- extern unsigned int ftr_fixup_test5_expected;
- int size = &end_ftr_fixup_test5 - &ftr_fixup_test5;
+ extern unsigned int ftr_fixup_test5[];
+ extern unsigned int end_ftr_fixup_test5[];
+ extern unsigned int ftr_fixup_test5_expected[];
+ int size = end_ftr_fixup_test5 - ftr_fixup_test5;
- check(memcmp(&ftr_fixup_test5, &ftr_fixup_test5_expected, size) == 0);
+ check(memcmp(ftr_fixup_test5, ftr_fixup_test5_expected, size) == 0);
}
static void test_alternative_case_with_external_branch(void)
{
- extern unsigned int ftr_fixup_test6;
- extern unsigned int end_ftr_fixup_test6;
- extern unsigned int ftr_fixup_test6_expected;
- int size = &end_ftr_fixup_test6 - &ftr_fixup_test6;
+ extern unsigned int ftr_fixup_test6[];
+ extern unsigned int end_ftr_fixup_test6[];
+ extern unsigned int ftr_fixup_test6_expected[];
+ int size = end_ftr_fixup_test6 - ftr_fixup_test6;
- check(memcmp(&ftr_fixup_test6, &ftr_fixup_test6_expected, size) == 0);
+ check(memcmp(ftr_fixup_test6, ftr_fixup_test6_expected, size) == 0);
}
static void test_cpu_macros(void)
{
- extern u8 ftr_fixup_test_FTR_macros;
- extern u8 ftr_fixup_test_FTR_macros_expected;
- unsigned long size = &ftr_fixup_test_FTR_macros_expected -
- &ftr_fixup_test_FTR_macros;
+ extern u8 ftr_fixup_test_FTR_macros[];
+ extern u8 ftr_fixup_test_FTR_macros_expected[];
+ unsigned long size = ftr_fixup_test_FTR_macros_expected -
+ ftr_fixup_test_FTR_macros;
/* The fixups have already been done for us during boot */
- check(memcmp(&ftr_fixup_test_FTR_macros,
- &ftr_fixup_test_FTR_macros_expected, size) == 0);
+ check(memcmp(ftr_fixup_test_FTR_macros,
+ ftr_fixup_test_FTR_macros_expected, size) == 0);
}
static void test_fw_macros(void)
{
#ifdef CONFIG_PPC64
- extern u8 ftr_fixup_test_FW_FTR_macros;
- extern u8 ftr_fixup_test_FW_FTR_macros_expected;
- unsigned long size = &ftr_fixup_test_FW_FTR_macros_expected -
- &ftr_fixup_test_FW_FTR_macros;
+ extern u8 ftr_fixup_test_FW_FTR_macros[];
+ extern u8 ftr_fixup_test_FW_FTR_macros_expected[];
+ unsigned long size = ftr_fixup_test_FW_FTR_macros_expected -
+ ftr_fixup_test_FW_FTR_macros;
/* The fixups have already been done for us during boot */
- check(memcmp(&ftr_fixup_test_FW_FTR_macros,
- &ftr_fixup_test_FW_FTR_macros_expected, size) == 0);
+ check(memcmp(ftr_fixup_test_FW_FTR_macros,
+ ftr_fixup_test_FW_FTR_macros_expected, size) == 0);
#endif
}
static void test_lwsync_macros(void)
{
- extern u8 lwsync_fixup_test;
- extern u8 end_lwsync_fixup_test;
- extern u8 lwsync_fixup_test_expected_LWSYNC;
- extern u8 lwsync_fixup_test_expected_SYNC;
- unsigned long size = &end_lwsync_fixup_test -
- &lwsync_fixup_test;
+ extern u8 lwsync_fixup_test[];
+ extern u8 end_lwsync_fixup_test[];
+ extern u8 lwsync_fixup_test_expected_LWSYNC[];
+ extern u8 lwsync_fixup_test_expected_SYNC[];
+ unsigned long size = end_lwsync_fixup_test -
+ lwsync_fixup_test;
/* The fixups have already been done for us during boot */
if (cur_cpu_spec->cpu_features & CPU_FTR_LWSYNC) {
- check(memcmp(&lwsync_fixup_test,
- &lwsync_fixup_test_expected_LWSYNC, size) == 0);
+ check(memcmp(lwsync_fixup_test,
+ lwsync_fixup_test_expected_LWSYNC, size) == 0);
} else {
- check(memcmp(&lwsync_fixup_test,
- &lwsync_fixup_test_expected_SYNC, size) == 0);
+ check(memcmp(lwsync_fixup_test,
+ lwsync_fixup_test_expected_SYNC, size) == 0);
}
}
diff --git a/arch/powerpc/lib/sstep.c b/arch/powerpc/lib/sstep.c
index 33117f8..ee33327 100644
--- a/arch/powerpc/lib/sstep.c
+++ b/arch/powerpc/lib/sstep.c
@@ -683,8 +683,10 @@
case 19:
switch ((instr >> 1) & 0x3ff) {
case 0: /* mcrf */
- rd = (instr >> 21) & 0x1c;
- ra = (instr >> 16) & 0x1c;
+ rd = 7 - ((instr >> 23) & 0x7);
+ ra = 7 - ((instr >> 18) & 0x7);
+ rd *= 4;
+ ra *= 4;
val = (regs->ccr >> ra) & 0xf;
regs->ccr = (regs->ccr & ~(0xfUL << rd)) | (val << rd);
goto instr_done;
@@ -964,6 +966,19 @@
#endif
case 19: /* mfcr */
+ if ((instr >> 20) & 1) {
+ imm = 0xf0000000UL;
+ for (sh = 0; sh < 8; ++sh) {
+ if (instr & (0x80000 >> sh)) {
+ regs->gpr[rd] = regs->ccr & imm;
+ break;
+ }
+ imm >>= 4;
+ }
+
+ goto instr_done;
+ }
+
regs->gpr[rd] = regs->ccr;
regs->gpr[rd] &= 0xffffffffUL;
goto instr_done;
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 8541f18..46b4e67 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -402,6 +402,7 @@
void free_initmem(void)
{
ppc_md.progress = ppc_printk_progress;
+ mark_initmem_nx();
free_initmem_default(POISON_FREE_INITMEM);
}
diff --git a/arch/powerpc/mm/mmap.c b/arch/powerpc/mm/mmap.c
index 0ee6be4..5d78b19 100644
--- a/arch/powerpc/mm/mmap.c
+++ b/arch/powerpc/mm/mmap.c
@@ -34,16 +34,9 @@
/*
* Top of mmap area (just below the process stack).
*
- * Leave at least a ~128 MB hole on 32bit applications.
- *
- * On 64bit applications we randomise the stack by 1GB so we need to
- * space our mmap start address by a further 1GB, otherwise there is a
- * chance the mmap area will end up closer to the stack than our ulimit
- * requires.
+ * Leave at least a ~128 MB hole.
*/
-#define MIN_GAP32 (128*1024*1024)
-#define MIN_GAP64 ((128 + 1024)*1024*1024UL)
-#define MIN_GAP ((is_32bit_task()) ? MIN_GAP32 : MIN_GAP64)
+#define MIN_GAP (128*1024*1024)
#define MAX_GAP (TASK_SIZE/6*5)
static inline int mmap_is_legacy(void)
@@ -71,9 +64,26 @@
return rnd << PAGE_SHIFT;
}
+static inline unsigned long stack_maxrandom_size(void)
+{
+ if (!(current->flags & PF_RANDOMIZE))
+ return 0;
+
+ /* 8MB for 32bit, 1GB for 64bit */
+ if (is_32bit_task())
+ return (1<<23);
+ else
+ return (1<<30);
+}
+
static inline unsigned long mmap_base(unsigned long rnd)
{
unsigned long gap = rlimit(RLIMIT_STACK);
+ unsigned long pad = stack_maxrandom_size() + stack_guard_gap;
+
+ /* Values close to RLIM_INFINITY can overflow. */
+ if (gap + pad > gap)
+ gap += pad;
if (gap < MIN_GAP)
gap = MIN_GAP;
diff --git a/arch/powerpc/mm/mmu_context_book3s64.c b/arch/powerpc/mm/mmu_context_book3s64.c
index 71de2c6..a75f638 100644
--- a/arch/powerpc/mm/mmu_context_book3s64.c
+++ b/arch/powerpc/mm/mmu_context_book3s64.c
@@ -126,9 +126,10 @@
static int radix__init_new_context(struct mm_struct *mm)
{
unsigned long rts_field;
- int index;
+ int index, max_id;
- index = alloc_context_id(1, PRTB_ENTRIES - 1);
+ max_id = (1 << mmu_pid_bits) - 1;
+ index = alloc_context_id(mmu_base_pid, max_id);
if (index < 0)
return index;
@@ -138,6 +139,14 @@
rts_field = radix__get_tree_size();
process_tb[index].prtb0 = cpu_to_be64(rts_field | __pa(mm->pgd) | RADIX_PGD_INDEX_SIZE);
+ /*
+ * Order the above store with subsequent update of the PID
+ * register (at which point HW can start loading/caching
+ * the entry) and the corresponding load by the MMU from
+ * the L2 cache.
+ */
+ asm volatile("ptesync;isync" : : : "memory");
+
mm->context.npu_context = NULL;
return index;
@@ -223,9 +232,15 @@
mm->context.cop_lockp = NULL;
#endif /* CONFIG_PPC_ICSWX */
- if (radix_enabled())
- process_tb[mm->context.id].prtb1 = 0;
- else
+ if (radix_enabled()) {
+ /*
+ * Radix doesn't have a valid bit in the process table
+ * entries. However we know that at least P9 implementation
+ * will avoid caching an entry with an invalid RTS field,
+ * and 0 is invalid. So this will do.
+ */
+ process_tb[mm->context.id].prtb0 = 0;
+ } else
subpage_prot_free(mm);
destroy_pagetable_page(mm);
__destroy_context(mm->context.id);
diff --git a/arch/powerpc/mm/pgtable-hash64.c b/arch/powerpc/mm/pgtable-hash64.c
index 188b410..443a2c6 100644
--- a/arch/powerpc/mm/pgtable-hash64.c
+++ b/arch/powerpc/mm/pgtable-hash64.c
@@ -425,33 +425,51 @@
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
#ifdef CONFIG_STRICT_KERNEL_RWX
-void hash__mark_rodata_ro(void)
+static bool hash__change_memory_range(unsigned long start, unsigned long end,
+ unsigned long newpp)
{
- unsigned long start = (unsigned long)_stext;
- unsigned long end = (unsigned long)__init_begin;
unsigned long idx;
unsigned int step, shift;
- unsigned long newpp = PP_RXXX;
shift = mmu_psize_defs[mmu_linear_psize].shift;
step = 1 << shift;
- start = ((start + step - 1) >> shift) << shift;
- end = (end >> shift) << shift;
+ start = ALIGN_DOWN(start, step);
+ end = ALIGN(end, step); // aligns up
- pr_devel("marking ro start %lx, end %lx, step %x\n",
- start, end, step);
+ if (start >= end)
+ return false;
- if (start == end) {
- pr_warn("could not set rodata ro, relocate the start"
- " of the kernel to a 0x%x boundary\n", step);
- return;
- }
+ pr_debug("Changing page protection on range 0x%lx-0x%lx, to 0x%lx, step 0x%x\n",
+ start, end, newpp, step);
for (idx = start; idx < end; idx += step)
/* Not sure if we can do much with the return value */
mmu_hash_ops.hpte_updateboltedpp(newpp, idx, mmu_linear_psize,
mmu_kernel_ssize);
+ return true;
+}
+
+void hash__mark_rodata_ro(void)
+{
+ unsigned long start, end;
+
+ start = (unsigned long)_stext;
+ end = (unsigned long)__init_begin;
+
+ WARN_ON(!hash__change_memory_range(start, end, PP_RXXX));
+}
+
+void hash__mark_initmem_nx(void)
+{
+ unsigned long start, end, pp;
+
+ start = (unsigned long)__init_begin;
+ end = (unsigned long)__init_end;
+
+ pp = htab_convert_pte_flags(pgprot_val(PAGE_KERNEL));
+
+ WARN_ON(!hash__change_memory_range(start, end, pp));
}
#endif
diff --git a/arch/powerpc/mm/pgtable-radix.c b/arch/powerpc/mm/pgtable-radix.c
index 8c13e42..671a45d 100644
--- a/arch/powerpc/mm/pgtable-radix.c
+++ b/arch/powerpc/mm/pgtable-radix.c
@@ -25,6 +25,9 @@
#include <trace/events/thp.h>
+unsigned int mmu_pid_bits;
+unsigned int mmu_base_pid;
+
static int native_register_process_table(unsigned long base, unsigned long pg_sz,
unsigned long table_size)
{
@@ -112,10 +115,9 @@
}
#ifdef CONFIG_STRICT_KERNEL_RWX
-void radix__mark_rodata_ro(void)
+void radix__change_memory_range(unsigned long start, unsigned long end,
+ unsigned long clear)
{
- unsigned long start = (unsigned long)_stext;
- unsigned long end = (unsigned long)__init_begin;
unsigned long idx;
pgd_t *pgdp;
pud_t *pudp;
@@ -125,7 +127,8 @@
start = ALIGN_DOWN(start, PAGE_SIZE);
end = PAGE_ALIGN(end); // aligns up
- pr_devel("marking ro start %lx, end %lx\n", start, end);
+ pr_debug("Changing flags on range %lx-%lx removing 0x%lx\n",
+ start, end, clear);
for (idx = start; idx < end; idx += PAGE_SIZE) {
pgdp = pgd_offset_k(idx);
@@ -147,11 +150,29 @@
if (!ptep)
continue;
update_the_pte:
- radix__pte_update(&init_mm, idx, ptep, _PAGE_WRITE, 0, 0);
+ radix__pte_update(&init_mm, idx, ptep, clear, 0, 0);
}
radix__flush_tlb_kernel_range(start, end);
}
+
+void radix__mark_rodata_ro(void)
+{
+ unsigned long start, end;
+
+ start = (unsigned long)_stext;
+ end = (unsigned long)__init_begin;
+
+ radix__change_memory_range(start, end, _PAGE_WRITE);
+}
+
+void radix__mark_initmem_nx(void)
+{
+ unsigned long start = (unsigned long)__init_begin;
+ unsigned long end = (unsigned long)__init_end;
+
+ radix__change_memory_range(start, end, _PAGE_EXEC);
+}
#endif /* CONFIG_STRICT_KERNEL_RWX */
static inline void __meminit print_mapping(unsigned long start,
@@ -243,11 +264,34 @@
for_each_memblock(memory, reg)
WARN_ON(create_physical_mapping(reg->base,
reg->base + reg->size));
+
+ /* Find out how many PID bits are supported */
+ if (cpu_has_feature(CPU_FTR_HVMODE)) {
+ if (!mmu_pid_bits)
+ mmu_pid_bits = 20;
+#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
+ /*
+ * When KVM is possible, we only use the top half of the
+ * PID space to avoid collisions between host and guest PIDs
+ * which can cause problems due to prefetch when exiting the
+ * guest with AIL=3
+ */
+ mmu_base_pid = 1 << (mmu_pid_bits - 1);
+#else
+ mmu_base_pid = 1;
+#endif
+ } else {
+ /* The guest uses the bottom half of the PID space */
+ if (!mmu_pid_bits)
+ mmu_pid_bits = 19;
+ mmu_base_pid = 1;
+ }
+
/*
* Allocate Partition table and process table for the
* host.
*/
- BUILD_BUG_ON_MSG((PRTB_SIZE_SHIFT > 36), "Process table size too large.");
+ BUG_ON(PRTB_SIZE_SHIFT > 36);
process_tb = early_alloc_pgtable(1UL << PRTB_SIZE_SHIFT);
/*
* Fill in the process table.
@@ -321,6 +365,12 @@
if (type == NULL || strcmp(type, "cpu") != 0)
return 0;
+ /* Find MMU PID size */
+ prop = of_get_flat_dt_prop(node, "ibm,mmu-pid-bits", &size);
+ if (prop && size == 4)
+ mmu_pid_bits = be32_to_cpup(prop);
+
+ /* Grab page size encodings */
prop = of_get_flat_dt_prop(node, "ibm,processor-radix-AP-encodings", &size);
if (!prop)
return 0;
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index 5c0b795..0736e94 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -505,4 +505,12 @@
else
hash__mark_rodata_ro();
}
+
+void mark_initmem_nx(void)
+{
+ if (radix_enabled())
+ radix__mark_initmem_nx();
+ else
+ hash__mark_initmem_nx();
+}
#endif
diff --git a/arch/powerpc/mm/subpage-prot.c b/arch/powerpc/mm/subpage-prot.c
index e94fbd4..781532d 100644
--- a/arch/powerpc/mm/subpage-prot.c
+++ b/arch/powerpc/mm/subpage-prot.c
@@ -36,7 +36,7 @@
}
}
addr = 0;
- for (i = 0; i < 2; ++i) {
+ for (i = 0; i < (TASK_SIZE_USER64 >> 43); ++i) {
p = spt->protptrs[i];
if (!p)
continue;
diff --git a/arch/powerpc/mm/tlb-radix.c b/arch/powerpc/mm/tlb-radix.c
index 744e016..16ae1bb 100644
--- a/arch/powerpc/mm/tlb-radix.c
+++ b/arch/powerpc/mm/tlb-radix.c
@@ -12,12 +12,12 @@
#include <linux/mm.h>
#include <linux/hugetlb.h>
#include <linux/memblock.h>
-#include <asm/ppc-opcode.h>
+#include <asm/ppc-opcode.h>
#include <asm/tlb.h>
#include <asm/tlbflush.h>
#include <asm/trace.h>
-
+#include <asm/cputhreads.h>
#define RIC_FLUSH_TLB 0
#define RIC_FLUSH_PWC 1
@@ -454,3 +454,44 @@
else
radix__flush_tlb_page_psize(mm, address, mmu_virtual_psize);
}
+
+#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
+extern void radix_kvm_prefetch_workaround(struct mm_struct *mm)
+{
+ unsigned int pid = mm->context.id;
+
+ if (unlikely(pid == MMU_NO_CONTEXT))
+ return;
+
+ /*
+ * If this context hasn't run on that CPU before and KVM is
+ * around, there's a slim chance that the guest on another
+ * CPU just brought in obsolete translation into the TLB of
+ * this CPU due to a bad prefetch using the guest PID on
+ * the way into the hypervisor.
+ *
+ * We work around this here. If KVM is possible, we check if
+ * any sibling thread is in KVM. If it is, the window may exist
+ * and thus we flush that PID from the core.
+ *
+ * A potential future improvement would be to mark which PIDs
+ * have never been used on the system and avoid it if the PID
+ * is new and the process has no other cpumask bit set.
+ */
+ if (cpu_has_feature(CPU_FTR_HVMODE) && radix_enabled()) {
+ int cpu = smp_processor_id();
+ int sib = cpu_first_thread_sibling(cpu);
+ bool flush = false;
+
+ for (; sib <= cpu_last_thread_sibling(cpu) && !flush; sib++) {
+ if (sib == cpu)
+ continue;
+ if (paca[sib].kvm_hstate.kvm_vcpu)
+ flush = true;
+ }
+ if (flush)
+ _tlbiel_pid(pid, RIC_FLUSH_ALL);
+ }
+}
+EXPORT_SYMBOL_GPL(radix_kvm_prefetch_workaround);
+#endif /* CONFIG_KVM_BOOK3S_HV_POSSIBLE */
diff --git a/arch/powerpc/perf/isa207-common.c b/arch/powerpc/perf/isa207-common.c
index 8125160..3f3aa9a 100644
--- a/arch/powerpc/perf/isa207-common.c
+++ b/arch/powerpc/perf/isa207-common.c
@@ -90,13 +90,15 @@
* MMCRA[SDAR_MODE] will be set to 0b01
* For rest
* MMCRA[SDAR_MODE] will be set from event code.
+ * If sdar_mode from event is zero, default to 0b01. Hardware
+ * requires that we set a non-zero value.
*/
if (cpu_has_feature(CPU_FTR_ARCH_300)) {
if (is_event_marked(event) || (*mmcra & MMCRA_SAMPLE_ENABLE))
*mmcra &= MMCRA_SDAR_MODE_NO_UPDATES;
- else if (!cpu_has_feature(CPU_FTR_POWER9_DD1))
+ else if (!cpu_has_feature(CPU_FTR_POWER9_DD1) && p9_SDAR_MODE(event))
*mmcra |= p9_SDAR_MODE(event) << MMCRA_SDAR_MODE_SHIFT;
- else if (cpu_has_feature(CPU_FTR_POWER9_DD1))
+ else
*mmcra |= MMCRA_SDAR_MODE_TLB;
} else
*mmcra |= MMCRA_SDAR_MODE_TLB;
diff --git a/arch/powerpc/perf/power9-events-list.h b/arch/powerpc/perf/power9-events-list.h
index 80204e0..5068918 100644
--- a/arch/powerpc/perf/power9-events-list.h
+++ b/arch/powerpc/perf/power9-events-list.h
@@ -51,8 +51,12 @@
EVENT(PM_ITLB_MISS, 0x400fc)
/* Run_Instructions */
EVENT(PM_RUN_INST_CMPL, 0x500fa)
+/* Alternate event code for PM_RUN_INST_CMPL */
+EVENT(PM_RUN_INST_CMPL_ALT, 0x400fa)
/* Run_cycles */
EVENT(PM_RUN_CYC, 0x600f4)
+/* Alternate event code for Run_cycles */
+EVENT(PM_RUN_CYC_ALT, 0x200f4)
/* Instruction Dispatched */
EVENT(PM_INST_DISP, 0x200f2)
EVENT(PM_INST_DISP_ALT, 0x300f2)
diff --git a/arch/powerpc/perf/power9-pmu.c b/arch/powerpc/perf/power9-pmu.c
index f17435e..2280cf8 100644
--- a/arch/powerpc/perf/power9-pmu.c
+++ b/arch/powerpc/perf/power9-pmu.c
@@ -107,6 +107,8 @@
/* Table of alternatives, sorted by column 0 */
static const unsigned int power9_event_alternatives[][MAX_ALT] = {
{ PM_INST_DISP, PM_INST_DISP_ALT },
+ { PM_RUN_CYC_ALT, PM_RUN_CYC },
+ { PM_RUN_INST_CMPL_ALT, PM_RUN_INST_CMPL },
};
static int power9_get_alternatives(u64 event, unsigned int flags, u64 alt[])
diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
index d7c9b18..763ffca 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
@@ -89,7 +89,7 @@
goto err;
ret = of_irq_to_resource(np, 0, &res[1]);
- if (!ret)
+ if (ret <= 0)
goto err;
pdev = platform_device_alloc("mpc83xx_spi", i);
diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index d8af9bc0..9558d72 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -605,6 +605,24 @@
{ Opt_err, NULL },
};
+static int spufs_show_options(struct seq_file *m, struct dentry *root)
+{
+ struct spufs_sb_info *sbi = spufs_get_sb_info(root->d_sb);
+ struct inode *inode = root->d_inode;
+
+ if (!uid_eq(inode->i_uid, GLOBAL_ROOT_UID))
+ seq_printf(m, ",uid=%u",
+ from_kuid_munged(&init_user_ns, inode->i_uid));
+ if (!gid_eq(inode->i_gid, GLOBAL_ROOT_GID))
+ seq_printf(m, ",gid=%u",
+ from_kgid_munged(&init_user_ns, inode->i_gid));
+ if ((inode->i_mode & S_IALLUGO) != 0775)
+ seq_printf(m, ",mode=%o", inode->i_mode);
+ if (sbi->debug)
+ seq_puts(m, ",debug");
+ return 0;
+}
+
static int
spufs_parse_options(struct super_block *sb, char *options, struct inode *root)
{
@@ -724,11 +742,9 @@
.destroy_inode = spufs_destroy_inode,
.statfs = simple_statfs,
.evict_inode = spufs_evict_inode,
- .show_options = generic_show_options,
+ .show_options = spufs_show_options,
};
- save_mount_options(sb, data);
-
info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c
index 59684b4..cad6b57 100644
--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c
@@ -59,6 +59,8 @@
void opal_configure_cores(void)
{
+ u64 reinit_flags = 0;
+
/* Do the actual re-init, This will clobber all FPRs, VRs, etc...
*
* It will preserve non volatile GPRs and HSPRG0/1. It will
@@ -66,11 +68,24 @@
* but it might clobber a bunch.
*/
#ifdef __BIG_ENDIAN__
- opal_reinit_cpus(OPAL_REINIT_CPUS_HILE_BE);
+ reinit_flags |= OPAL_REINIT_CPUS_HILE_BE;
#else
- opal_reinit_cpus(OPAL_REINIT_CPUS_HILE_LE);
+ reinit_flags |= OPAL_REINIT_CPUS_HILE_LE;
#endif
+ /*
+ * POWER9 always support running hash:
+ * ie. Host hash supports hash guests
+ * Host radix supports hash/radix guests
+ */
+ if (early_cpu_has_feature(CPU_FTR_ARCH_300)) {
+ reinit_flags |= OPAL_REINIT_CPUS_MMU_HASH;
+ if (early_radix_enabled())
+ reinit_flags |= OPAL_REINIT_CPUS_MMU_RADIX;
+ }
+
+ opal_reinit_cpus(reinit_flags);
+
/* Restore some bits */
if (cur_cpu_spec->cpu_restore)
cur_cpu_spec->cpu_restore();
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 4376135..b900eb1 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1852,6 +1852,14 @@
/* 4GB offset bypasses 32-bit space */
set_dma_offset(&pdev->dev, (1ULL << 32));
set_dma_ops(&pdev->dev, &dma_direct_ops);
+ } else if (dma_mask >> 32 && dma_mask != DMA_BIT_MASK(64)) {
+ /*
+ * Fail the request if a DMA mask between 32 and 64 bits
+ * was requested but couldn't be fulfilled. Ideally we
+ * would do this for 64-bits but historically we have
+ * always fallen back to 32-bits.
+ */
+ return -ENOMEM;
} else {
dev_info(&pdev->dev, "Using 32-bit DMA via iommu\n");
set_dma_ops(&pdev->dev, &dma_iommu_ops);
diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c
index 2dc7e5f..897aa14 100644
--- a/arch/powerpc/platforms/powernv/setup.c
+++ b/arch/powerpc/platforms/powernv/setup.c
@@ -225,6 +225,8 @@
static void pnv_kexec_cpu_down(int crash_shutdown, int secondary)
{
+ u64 reinit_flags;
+
if (xive_enabled())
xive_kexec_teardown_cpu(secondary);
else
@@ -254,8 +256,15 @@
* We might be running as little-endian - now that interrupts
* are disabled, reset the HILE bit to big-endian so we don't
* take interrupts in the wrong endian later
+ *
+ * We reinit to enable both radix and hash on P9 to ensure
+ * the mode used by the next kernel is always supported.
*/
- opal_reinit_cpus(OPAL_REINIT_CPUS_HILE_BE);
+ reinit_flags = OPAL_REINIT_CPUS_HILE_BE;
+ if (cpu_has_feature(CPU_FTR_ARCH_300))
+ reinit_flags |= OPAL_REINIT_CPUS_MMU_RADIX |
+ OPAL_REINIT_CPUS_MMU_HASH;
+ opal_reinit_cpus(reinit_flags);
}
}
#endif /* CONFIG_KEXEC_CORE */
diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c
index e5bf1e8..011ef21 100644
--- a/arch/powerpc/platforms/pseries/reconfig.c
+++ b/arch/powerpc/platforms/pseries/reconfig.c
@@ -82,7 +82,6 @@
of_detach_node(np);
of_node_put(parent);
- of_node_put(np); /* Must decrement the refcount */
return 0;
}
diff --git a/arch/s390/include/asm/bug.h b/arch/s390/include/asm/bug.h
index 1bbd9db..ce9cc12 100644
--- a/arch/s390/include/asm/bug.h
+++ b/arch/s390/include/asm/bug.h
@@ -14,7 +14,7 @@
".section .rodata.str,\"aMS\",@progbits,1\n" \
"2: .asciz \""__FILE__"\"\n" \
".previous\n" \
- ".section __bug_table,\"a\"\n" \
+ ".section __bug_table,\"aw\"\n" \
"3: .long 1b-3b,2b-3b\n" \
" .short %0,%1\n" \
" .org 3b+%2\n" \
@@ -30,7 +30,7 @@
asm volatile( \
"0: j 0b+2\n" \
"1:\n" \
- ".section __bug_table,\"a\"\n" \
+ ".section __bug_table,\"aw\"\n" \
"2: .long 1b-2b\n" \
" .short %0\n" \
" .org 2b+%1\n" \
diff --git a/arch/s390/include/asm/uaccess.h b/arch/s390/include/asm/uaccess.h
index 28b5281..304cfe4 100644
--- a/arch/s390/include/asm/uaccess.h
+++ b/arch/s390/include/asm/uaccess.h
@@ -249,9 +249,6 @@
int __get_user_bad(void) __attribute__((noreturn));
-#define __put_user_unaligned __put_user
-#define __get_user_unaligned __get_user
-
unsigned long __must_check
raw_copy_in_user(void __user *to, const void __user *from, unsigned long n);
diff --git a/arch/s390/kernel/machine_kexec.c b/arch/s390/kernel/machine_kexec.c
index 49a6bd4..3d0b14a 100644
--- a/arch/s390/kernel/machine_kexec.c
+++ b/arch/s390/kernel/machine_kexec.c
@@ -246,6 +246,7 @@
VMCOREINFO_SYMBOL(lowcore_ptr);
VMCOREINFO_SYMBOL(high_memory);
VMCOREINFO_LENGTH(lowcore_ptr, NR_CPUS);
+ mem_assign_absolute(S390_lowcore.vmcore_info, paddr_vmcoreinfo_note());
}
void machine_shutdown(void)
diff --git a/arch/s390/kernel/perf_cpum_sf.c b/arch/s390/kernel/perf_cpum_sf.c
index 0c82f79..c1bf75f 100644
--- a/arch/s390/kernel/perf_cpum_sf.c
+++ b/arch/s390/kernel/perf_cpum_sf.c
@@ -998,7 +998,7 @@
psw_bits(regs.psw).ia = sfr->basic.ia;
psw_bits(regs.psw).dat = sfr->basic.T;
psw_bits(regs.psw).wait = sfr->basic.W;
- psw_bits(regs.psw).per = sfr->basic.P;
+ psw_bits(regs.psw).pstate = sfr->basic.P;
psw_bits(regs.psw).as = sfr->basic.AS;
/*
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 3ae756c..3d1d808 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -496,11 +496,6 @@
pr_notice("The maximum memory size is %luMB\n", memory_end >> 20);
}
-static void __init setup_vmcoreinfo(void)
-{
- mem_assign_absolute(S390_lowcore.vmcore_info, paddr_vmcoreinfo_note());
-}
-
#ifdef CONFIG_CRASH_DUMP
/*
@@ -939,7 +934,6 @@
#endif
setup_resources();
- setup_vmcoreinfo();
setup_lowcore();
smp_fill_possible_mask();
cpu_detect_mhz_feature();
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 3f2884e..af09d34 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -1324,7 +1324,7 @@
{
uint8_t *keys;
uint64_t hva;
- int i, r = 0;
+ int srcu_idx, i, r = 0;
if (args->flags != 0)
return -EINVAL;
@@ -1342,6 +1342,7 @@
return -ENOMEM;
down_read(¤t->mm->mmap_sem);
+ srcu_idx = srcu_read_lock(&kvm->srcu);
for (i = 0; i < args->count; i++) {
hva = gfn_to_hva(kvm, args->start_gfn + i);
if (kvm_is_error_hva(hva)) {
@@ -1353,6 +1354,7 @@
if (r)
break;
}
+ srcu_read_unlock(&kvm->srcu, srcu_idx);
up_read(¤t->mm->mmap_sem);
if (!r) {
@@ -1370,7 +1372,7 @@
{
uint8_t *keys;
uint64_t hva;
- int i, r = 0;
+ int srcu_idx, i, r = 0;
if (args->flags != 0)
return -EINVAL;
@@ -1396,6 +1398,7 @@
goto out;
down_read(¤t->mm->mmap_sem);
+ srcu_idx = srcu_read_lock(&kvm->srcu);
for (i = 0; i < args->count; i++) {
hva = gfn_to_hva(kvm, args->start_gfn + i);
if (kvm_is_error_hva(hva)) {
@@ -1413,6 +1416,7 @@
if (r)
break;
}
+ srcu_read_unlock(&kvm->srcu, srcu_idx);
up_read(¤t->mm->mmap_sem);
out:
kvfree(keys);
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index d4d409b..4a1f736 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -591,11 +591,11 @@
unsigned long ptev;
pgste_t pgste;
- /* Clear storage key */
+ /* Clear storage key ACC and F, but set R/C */
preempt_disable();
pgste = pgste_get_lock(ptep);
- pgste_val(pgste) &= ~(PGSTE_ACC_BITS | PGSTE_FP_BIT |
- PGSTE_GR_BIT | PGSTE_GC_BIT);
+ pgste_val(pgste) &= ~(PGSTE_ACC_BITS | PGSTE_FP_BIT);
+ pgste_val(pgste) |= PGSTE_GR_BIT | PGSTE_GC_BIT;
ptev = pte_val(*ptep);
if (!(ptev & _PAGE_INVALID) && (ptev & _PAGE_WRITE))
page_set_storage_key(ptev & PAGE_MASK, PAGE_DEFAULT_KEY, 1);
diff --git a/arch/sh/include/asm/Kbuild b/arch/sh/include/asm/Kbuild
index 590c91a..1a6f9c3 100644
--- a/arch/sh/include/asm/Kbuild
+++ b/arch/sh/include/asm/Kbuild
@@ -1,39 +1,20 @@
-
-generic-y += bitsperlong.h
generic-y += clkdev.h
generic-y += current.h
generic-y += delay.h
generic-y += div64.h
generic-y += emergency-restart.h
-generic-y += errno.h
generic-y += exec.h
-generic-y += fcntl.h
-generic-y += ioctl.h
-generic-y += ipcbuf.h
generic-y += irq_regs.h
generic-y += irq_work.h
-generic-y += kvm_para.h
generic-y += local.h
generic-y += local64.h
generic-y += mcs_spinlock.h
generic-y += mm-arch-hooks.h
-generic-y += mman.h
-generic-y += msgbuf.h
-generic-y += param.h
generic-y += parport.h
generic-y += percpu.h
-generic-y += poll.h
generic-y += preempt.h
-generic-y += resource.h
generic-y += rwsem.h
-generic-y += sembuf.h
generic-y += serial.h
-generic-y += shmbuf.h
generic-y += sizes.h
-generic-y += socket.h
-generic-y += statfs.h
-generic-y += termbits.h
-generic-y += termios.h
generic-y += trace_clock.h
-generic-y += ucontext.h
generic-y += xor.h
diff --git a/arch/sh/include/asm/bug.h b/arch/sh/include/asm/bug.h
index 1b77f06..5b50863 100644
--- a/arch/sh/include/asm/bug.h
+++ b/arch/sh/include/asm/bug.h
@@ -24,14 +24,14 @@
*/
#ifdef CONFIG_DEBUG_BUGVERBOSE
#define _EMIT_BUG_ENTRY \
- "\t.pushsection __bug_table,\"a\"\n" \
+ "\t.pushsection __bug_table,\"aw\"\n" \
"2:\t.long 1b, %O1\n" \
"\t.short %O2, %O3\n" \
"\t.org 2b+%O4\n" \
"\t.popsection\n"
#else
#define _EMIT_BUG_ENTRY \
- "\t.pushsection __bug_table,\"a\"\n" \
+ "\t.pushsection __bug_table,\"aw\"\n" \
"2:\t.long 1b\n" \
"\t.short %O3\n" \
"\t.org 2b+%O4\n" \
@@ -48,6 +48,7 @@
"i" (__FILE__), \
"i" (__LINE__), "i" (0), \
"i" (sizeof(struct bug_entry))); \
+ unreachable(); \
} while (0)
#define __WARN_FLAGS(flags) \
diff --git a/arch/sh/include/asm/flat.h b/arch/sh/include/asm/flat.h
index 5d84df5..275fcae 100644
--- a/arch/sh/include/asm/flat.h
+++ b/arch/sh/include/asm/flat.h
@@ -12,11 +12,22 @@
#ifndef __ASM_SH_FLAT_H
#define __ASM_SH_FLAT_H
+#include <asm/unaligned.h>
+
#define flat_argvp_envp_on_stack() 0
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
-#define flat_get_addr_from_rp(rp, relval, flags, p) get_unaligned(rp)
-#define flat_put_addr_at_rp(rp, val, relval) put_unaligned(val,rp)
+static inline int flat_get_addr_from_rp(u32 __user *rp, u32 relval, u32 flags,
+ u32 *addr, u32 *persistent)
+{
+ *addr = get_unaligned((__force u32 *)rp);
+ return 0;
+}
+static inline int flat_put_addr_at_rp(u32 __user *rp, u32 addr, u32 rel)
+{
+ put_unaligned(addr, (__force u32 *)rp);
+ return 0;
+}
#define flat_get_relocate_addr(rel) (rel)
#define flat_set_persistent(relval, p) ({ (void)p; 0; })
diff --git a/arch/sh/include/asm/stackprotector.h b/arch/sh/include/asm/stackprotector.h
index d9df3a7..141515a 100644
--- a/arch/sh/include/asm/stackprotector.h
+++ b/arch/sh/include/asm/stackprotector.h
@@ -19,6 +19,7 @@
/* Try to get a semi random initial value. */
get_random_bytes(&canary, sizeof(canary));
canary ^= LINUX_VERSION_CODE;
+ canary &= CANARY_MASK;
current->stack_canary = canary;
__stack_chk_guard = current->stack_canary;
diff --git a/arch/sh/include/uapi/asm/Kbuild b/arch/sh/include/uapi/asm/Kbuild
index b55fc2a..e285313 100644
--- a/arch/sh/include/uapi/asm/Kbuild
+++ b/arch/sh/include/uapi/asm/Kbuild
@@ -1,4 +1,22 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
+generic-y += bitsperlong.h
+generic-y += errno.h
+generic-y += fcntl.h
+generic-y += ioctl.h
+generic-y += ipcbuf.h
+generic-y += kvm_para.h
+generic-y += mman.h
+generic-y += msgbuf.h
+generic-y += param.h
+generic-y += poll.h
+generic-y += resource.h
+generic-y += sembuf.h
+generic-y += shmbuf.h
generic-y += siginfo.h
+generic-y += socket.h
+generic-y += statfs.h
+generic-y += termbits.h
+generic-y += termios.h
+generic-y += ucontext.h
diff --git a/arch/sh/include/uapi/asm/ioctls.h b/arch/sh/include/uapi/asm/ioctls.h
index eec7901..787bac9 100644
--- a/arch/sh/include/uapi/asm/ioctls.h
+++ b/arch/sh/include/uapi/asm/ioctls.h
@@ -93,7 +93,7 @@
#define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */
#define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */
#define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */
-#define TIOCGPTPEER _IOR('T', 0x41, int) /* Safely open the slave */
+#define TIOCGPTPEER _IO('T', 0x41) /* Safely open the slave */
#define TIOCSERCONFIG _IO('T', 83) /* 0x5453 */
#define TIOCSERGWILD _IOR('T', 84, int) /* 0x5454 */
diff --git a/arch/sh/mm/cache-sh5.c b/arch/sh/mm/cache-sh5.c
index d94dade..445b5e6 100644
--- a/arch/sh/mm/cache-sh5.c
+++ b/arch/sh/mm/cache-sh5.c
@@ -234,7 +234,7 @@
#define DUMMY_ALLOCO_AREA_SIZE ((L1_CACHE_BYTES << 10) + (1024 * 4))
static unsigned char dummy_alloco_area[DUMMY_ALLOCO_AREA_SIZE] __cacheline_aligned = { 0, };
-static void inline sh64_dcache_purge_sets(int sets_to_purge_base, int n_sets)
+static inline void sh64_dcache_purge_sets(int sets_to_purge_base, int n_sets)
{
/* Purge all ways in a particular block of sets, specified by the base
set number and number of sets. Can handle wrap-around, if that's
diff --git a/arch/sparc/configs/sparc32_defconfig b/arch/sparc/configs/sparc32_defconfig
index c74d370..207a43a 100644
--- a/arch/sparc/configs/sparc32_defconfig
+++ b/arch/sparc/configs/sparc32_defconfig
@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_LOG_BUF_SHIFT=14
@@ -23,7 +22,6 @@
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
-# CONFIG_INET_LRO is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
@@ -69,7 +67,6 @@
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
-CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_ISO9660_FS=m
CONFIG_PROC_KCORE=y
@@ -82,7 +79,6 @@
CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_KGDB=y
CONFIG_KGDB_TESTS=y
CONFIG_CRYPTO_NULL=m
diff --git a/arch/sparc/configs/sparc64_defconfig b/arch/sparc/configs/sparc64_defconfig
index b2e650d..ca8609d 100644
--- a/arch/sparc/configs/sparc64_defconfig
+++ b/arch/sparc/configs/sparc64_defconfig
@@ -1,5 +1,4 @@
CONFIG_64BIT=y
-CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
@@ -184,7 +183,6 @@
CONFIG_HID_THRUSTMASTER=y
CONFIG_HID_ZEROPLUS=y
CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_OHCI_HCD=y
@@ -210,8 +208,6 @@
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_UPROBE_EVENTS=y
CONFIG_KEYS=y
diff --git a/arch/sparc/include/asm/Kbuild b/arch/sparc/include/asm/Kbuild
index e9e837b..80ddc01 100644
--- a/arch/sparc/include/asm/Kbuild
+++ b/arch/sparc/include/asm/Kbuild
@@ -18,5 +18,4 @@
generic-y += rwsem.h
generic-y += serial.h
generic-y += trace_clock.h
-generic-y += types.h
generic-y += word-at-a-time.h
diff --git a/arch/sparc/include/asm/asm-prototypes.h b/arch/sparc/include/asm/asm-prototypes.h
new file mode 100644
index 0000000..d381e11
--- /dev/null
+++ b/arch/sparc/include/asm/asm-prototypes.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (c) 2017 Oracle and/or its affiliates. All rights reserved.
+ */
+
+#include <asm/xor.h>
+#include <asm/checksum.h>
+#include <asm/trap_block.h>
+#include <asm/uaccess.h>
+#include <asm/atomic.h>
+#include <asm/ftrace.h>
+#include <asm/cacheflush.h>
+#include <asm/oplib.h>
+#include <linux/atomic.h>
+
+void *__memscan_zero(void *, size_t);
+void *__memscan_generic(void *, int, size_t);
+void *__bzero(void *, size_t);
+void VISenter(void); /* Dummy prototype to supress warning */
+#undef memcpy
+#undef memset
+void *memcpy(void *dest, const void *src, size_t n);
+void *memset(void *s, int c, size_t n);
+typedef int TItype __attribute__((mode(TI)));
+TItype __multi3(TItype a, TItype b);
diff --git a/arch/sparc/include/asm/mmu_context_64.h b/arch/sparc/include/asm/mmu_context_64.h
index 2cddcda..87841d6 100644
--- a/arch/sparc/include/asm/mmu_context_64.h
+++ b/arch/sparc/include/asm/mmu_context_64.h
@@ -27,9 +27,11 @@
void __tsb_context_switch(unsigned long pgd_pa,
struct tsb_config *tsb_base,
struct tsb_config *tsb_huge,
- unsigned long tsb_descr_pa);
+ unsigned long tsb_descr_pa,
+ unsigned long secondary_ctx);
-static inline void tsb_context_switch(struct mm_struct *mm)
+static inline void tsb_context_switch_ctx(struct mm_struct *mm,
+ unsigned long ctx)
{
__tsb_context_switch(__pa(mm->pgd),
&mm->context.tsb_block[MM_TSB_BASE],
@@ -40,9 +42,12 @@
#else
NULL
#endif
- , __pa(&mm->context.tsb_descr[MM_TSB_BASE]));
+ , __pa(&mm->context.tsb_descr[MM_TSB_BASE]),
+ ctx);
}
+#define tsb_context_switch(X) tsb_context_switch_ctx(X, 0)
+
void tsb_grow(struct mm_struct *mm,
unsigned long tsb_index,
unsigned long mm_rss);
@@ -112,8 +117,7 @@
* cpu0 to update it's TSB because at that point the cpu_vm_mask
* only had cpu1 set in it.
*/
- load_secondary_context(mm);
- tsb_context_switch(mm);
+ tsb_context_switch_ctx(mm, CTX_HWBITS(mm->context));
/* Any time a processor runs a context on an address space
* for the first time, we must flush that context out of the
diff --git a/arch/sparc/include/asm/nmi.h b/arch/sparc/include/asm/nmi.h
index 26ad2b2..284eac3 100644
--- a/arch/sparc/include/asm/nmi.h
+++ b/arch/sparc/include/asm/nmi.h
@@ -7,6 +7,7 @@
extern atomic_t nmi_active;
+void arch_touch_nmi_watchdog(void);
void start_nmi_watchdog(void *unused);
void stop_nmi_watchdog(void *unused);
diff --git a/arch/sparc/include/asm/trap_block.h b/arch/sparc/include/asm/trap_block.h
index ec9c04d..ff05992 100644
--- a/arch/sparc/include/asm/trap_block.h
+++ b/arch/sparc/include/asm/trap_block.h
@@ -54,6 +54,7 @@
void init_cur_cpu_trap(struct thread_info *);
void setup_tba(void);
extern int ncpus_probed;
+extern u64 cpu_mondo_counter[NR_CPUS];
unsigned long real_hard_smp_processor_id(void);
diff --git a/arch/sparc/include/asm/uaccess_64.h b/arch/sparc/include/asm/uaccess_64.h
index 113d84e..6d4c997 100644
--- a/arch/sparc/include/asm/uaccess_64.h
+++ b/arch/sparc/include/asm/uaccess_64.h
@@ -9,7 +9,6 @@
#include <linux/string.h>
#include <asm/asi.h>
#include <asm/spitfire.h>
-#include <asm-generic/uaccess-unaligned.h>
#include <asm/extable_64.h>
#include <asm/processor.h>
diff --git a/arch/sparc/include/uapi/asm/Kbuild b/arch/sparc/include/uapi/asm/Kbuild
index b15bf6b..2178c78 100644
--- a/arch/sparc/include/uapi/asm/Kbuild
+++ b/arch/sparc/include/uapi/asm/Kbuild
@@ -1,2 +1,4 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
+
+generic-y += types.h
diff --git a/arch/sparc/include/uapi/asm/ioctls.h b/arch/sparc/include/uapi/asm/ioctls.h
index 6d27398..f5df72b 100644
--- a/arch/sparc/include/uapi/asm/ioctls.h
+++ b/arch/sparc/include/uapi/asm/ioctls.h
@@ -88,7 +88,7 @@
#define TIOCGPTN _IOR('t', 134, unsigned int) /* Get Pty Number */
#define TIOCSPTLCK _IOW('t', 135, int) /* Lock/unlock PTY */
#define TIOCSIG _IOW('t', 136, int) /* Generate signal on Pty slave */
-#define TIOCGPTPEER _IOR('t', 137, int) /* Safely open the slave */
+#define TIOCGPTPEER _IO('t', 137) /* Safely open the slave */
/* Little f */
#define FIOCLEX _IO('f', 1)
diff --git a/arch/sparc/kernel/mdesc.c b/arch/sparc/kernel/mdesc.c
index e4b4e79..fa466ce 100644
--- a/arch/sparc/kernel/mdesc.c
+++ b/arch/sparc/kernel/mdesc.c
@@ -205,7 +205,7 @@
handle_size = (sizeof(struct mdesc_handle) -
sizeof(struct mdesc_hdr) +
mdesc_size);
- base = kmalloc(handle_size + 15, GFP_KERNEL | __GFP_REPEAT);
+ base = kmalloc(handle_size + 15, GFP_KERNEL | __GFP_RETRY_MAYFAIL);
if (!base)
return NULL;
diff --git a/arch/sparc/kernel/nmi.c b/arch/sparc/kernel/nmi.c
index 95e73c6..048ad78 100644
--- a/arch/sparc/kernel/nmi.c
+++ b/arch/sparc/kernel/nmi.c
@@ -51,7 +51,7 @@
static DEFINE_PER_CPU(long, alert_counter);
static DEFINE_PER_CPU(int, nmi_touch);
-void touch_nmi_watchdog(void)
+void arch_touch_nmi_watchdog(void)
{
if (atomic_read(&nmi_active)) {
int cpu;
@@ -61,10 +61,8 @@
per_cpu(nmi_touch, cpu) = 1;
}
}
-
- touch_softlockup_watchdog();
}
-EXPORT_SYMBOL(touch_nmi_watchdog);
+EXPORT_SYMBOL(arch_touch_nmi_watchdog);
static void die_nmi(const char *str, struct pt_regs *regs, int do_panic)
{
diff --git a/arch/sparc/kernel/pci_sun4v.c b/arch/sparc/kernel/pci_sun4v.c
index 24f21c7..f10e2f7 100644
--- a/arch/sparc/kernel/pci_sun4v.c
+++ b/arch/sparc/kernel/pci_sun4v.c
@@ -673,12 +673,14 @@
static int dma_4v_supported(struct device *dev, u64 device_mask)
{
struct iommu *iommu = dev->archdata.iommu;
- u64 dma_addr_mask;
+ u64 dma_addr_mask = iommu->dma_addr_mask;
- if (device_mask > DMA_BIT_MASK(32) && iommu->atu)
- dma_addr_mask = iommu->atu->dma_addr_mask;
- else
- dma_addr_mask = iommu->dma_addr_mask;
+ if (device_mask > DMA_BIT_MASK(32)) {
+ if (iommu->atu)
+ dma_addr_mask = iommu->atu->dma_addr_mask;
+ else
+ return 0;
+ }
if ((device_mask & dma_addr_mask) == dma_addr_mask)
return 1;
diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index fdf3104..3218bc4 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -622,22 +622,48 @@
}
}
-/* Multi-cpu list version. */
+#define CPU_MONDO_COUNTER(cpuid) (cpu_mondo_counter[cpuid])
+#define MONDO_USEC_WAIT_MIN 2
+#define MONDO_USEC_WAIT_MAX 100
+#define MONDO_RETRY_LIMIT 500000
+
+/* Multi-cpu list version.
+ *
+ * Deliver xcalls to 'cnt' number of cpus in 'cpu_list'.
+ * Sometimes not all cpus receive the mondo, requiring us to re-send
+ * the mondo until all cpus have received, or cpus are truly stuck
+ * unable to receive mondo, and we timeout.
+ * Occasionally a target cpu strand is borrowed briefly by hypervisor to
+ * perform guest service, such as PCIe error handling. Consider the
+ * service time, 1 second overall wait is reasonable for 1 cpu.
+ * Here two in-between mondo check wait time are defined: 2 usec for
+ * single cpu quick turn around and up to 100usec for large cpu count.
+ * Deliver mondo to large number of cpus could take longer, we adjusts
+ * the retry count as long as target cpus are making forward progress.
+ */
static void hypervisor_xcall_deliver(struct trap_per_cpu *tb, int cnt)
{
- int retries, this_cpu, prev_sent, i, saw_cpu_error;
+ int this_cpu, tot_cpus, prev_sent, i, rem;
+ int usec_wait, retries, tot_retries;
+ u16 first_cpu = 0xffff;
+ unsigned long xc_rcvd = 0;
unsigned long status;
+ int ecpuerror_id = 0;
+ int enocpu_id = 0;
u16 *cpu_list;
+ u16 cpu;
this_cpu = smp_processor_id();
-
cpu_list = __va(tb->cpu_list_pa);
-
- saw_cpu_error = 0;
- retries = 0;
+ usec_wait = cnt * MONDO_USEC_WAIT_MIN;
+ if (usec_wait > MONDO_USEC_WAIT_MAX)
+ usec_wait = MONDO_USEC_WAIT_MAX;
+ retries = tot_retries = 0;
+ tot_cpus = cnt;
prev_sent = 0;
+
do {
- int forward_progress, n_sent;
+ int n_sent, mondo_delivered, target_cpu_busy;
status = sun4v_cpu_mondo_send(cnt,
tb->cpu_list_pa,
@@ -645,94 +671,113 @@
/* HV_EOK means all cpus received the xcall, we're done. */
if (likely(status == HV_EOK))
- break;
+ goto xcall_done;
+
+ /* If not these non-fatal errors, panic */
+ if (unlikely((status != HV_EWOULDBLOCK) &&
+ (status != HV_ECPUERROR) &&
+ (status != HV_ENOCPU)))
+ goto fatal_errors;
/* First, see if we made any forward progress.
*
+ * Go through the cpu_list, count the target cpus that have
+ * received our mondo (n_sent), and those that did not (rem).
+ * Re-pack cpu_list with the cpus remain to be retried in the
+ * front - this simplifies tracking the truly stalled cpus.
+ *
* The hypervisor indicates successful sends by setting
* cpu list entries to the value 0xffff.
+ *
+ * EWOULDBLOCK means some target cpus did not receive the
+ * mondo and retry usually helps.
+ *
+ * ECPUERROR means at least one target cpu is in error state,
+ * it's usually safe to skip the faulty cpu and retry.
+ *
+ * ENOCPU means one of the target cpu doesn't belong to the
+ * domain, perhaps offlined which is unexpected, but not
+ * fatal and it's okay to skip the offlined cpu.
*/
+ rem = 0;
n_sent = 0;
for (i = 0; i < cnt; i++) {
- if (likely(cpu_list[i] == 0xffff))
+ cpu = cpu_list[i];
+ if (likely(cpu == 0xffff)) {
n_sent++;
+ } else if ((status == HV_ECPUERROR) &&
+ (sun4v_cpu_state(cpu) == HV_CPU_STATE_ERROR)) {
+ ecpuerror_id = cpu + 1;
+ } else if (status == HV_ENOCPU && !cpu_online(cpu)) {
+ enocpu_id = cpu + 1;
+ } else {
+ cpu_list[rem++] = cpu;
+ }
}
- forward_progress = 0;
- if (n_sent > prev_sent)
- forward_progress = 1;
+ /* No cpu remained, we're done. */
+ if (rem == 0)
+ break;
+ /* Otherwise, update the cpu count for retry. */
+ cnt = rem;
+
+ /* Record the overall number of mondos received by the
+ * first of the remaining cpus.
+ */
+ if (first_cpu != cpu_list[0]) {
+ first_cpu = cpu_list[0];
+ xc_rcvd = CPU_MONDO_COUNTER(first_cpu);
+ }
+
+ /* Was any mondo delivered successfully? */
+ mondo_delivered = (n_sent > prev_sent);
prev_sent = n_sent;
- /* If we get a HV_ECPUERROR, then one or more of the cpus
- * in the list are in error state. Use the cpu_state()
- * hypervisor call to find out which cpus are in error state.
+ /* or, was any target cpu busy processing other mondos? */
+ target_cpu_busy = (xc_rcvd < CPU_MONDO_COUNTER(first_cpu));
+ xc_rcvd = CPU_MONDO_COUNTER(first_cpu);
+
+ /* Retry count is for no progress. If we're making progress,
+ * reset the retry count.
*/
- if (unlikely(status == HV_ECPUERROR)) {
- for (i = 0; i < cnt; i++) {
- long err;
- u16 cpu;
-
- cpu = cpu_list[i];
- if (cpu == 0xffff)
- continue;
-
- err = sun4v_cpu_state(cpu);
- if (err == HV_CPU_STATE_ERROR) {
- saw_cpu_error = (cpu + 1);
- cpu_list[i] = 0xffff;
- }
- }
- } else if (unlikely(status != HV_EWOULDBLOCK))
- goto fatal_mondo_error;
-
- /* Don't bother rewriting the CPU list, just leave the
- * 0xffff and non-0xffff entries in there and the
- * hypervisor will do the right thing.
- *
- * Only advance timeout state if we didn't make any
- * forward progress.
- */
- if (unlikely(!forward_progress)) {
- if (unlikely(++retries > 10000))
- goto fatal_mondo_timeout;
-
- /* Delay a little bit to let other cpus catch up
- * on their cpu mondo queue work.
- */
- udelay(2 * cnt);
+ if (likely(mondo_delivered || target_cpu_busy)) {
+ tot_retries += retries;
+ retries = 0;
+ } else if (unlikely(retries > MONDO_RETRY_LIMIT)) {
+ goto fatal_mondo_timeout;
}
+
+ /* Delay a little bit to let other cpus catch up on
+ * their cpu mondo queue work.
+ */
+ if (!mondo_delivered)
+ udelay(usec_wait);
+
+ retries++;
} while (1);
- if (unlikely(saw_cpu_error))
- goto fatal_mondo_cpu_error;
-
+xcall_done:
+ if (unlikely(ecpuerror_id > 0)) {
+ pr_crit("CPU[%d]: SUN4V mondo cpu error, target cpu(%d) was in error state\n",
+ this_cpu, ecpuerror_id - 1);
+ } else if (unlikely(enocpu_id > 0)) {
+ pr_crit("CPU[%d]: SUN4V mondo cpu error, target cpu(%d) does not belong to the domain\n",
+ this_cpu, enocpu_id - 1);
+ }
return;
-fatal_mondo_cpu_error:
- printk(KERN_CRIT "CPU[%d]: SUN4V mondo cpu error, some target cpus "
- "(including %d) were in error state\n",
- this_cpu, saw_cpu_error - 1);
- return;
+fatal_errors:
+ /* fatal errors include bad alignment, etc */
+ pr_crit("CPU[%d]: Args were cnt(%d) cpulist_pa(%lx) mondo_block_pa(%lx)\n",
+ this_cpu, tot_cpus, tb->cpu_list_pa, tb->cpu_mondo_block_pa);
+ panic("Unexpected SUN4V mondo error %lu\n", status);
fatal_mondo_timeout:
- printk(KERN_CRIT "CPU[%d]: SUN4V mondo timeout, no forward "
- " progress after %d retries.\n",
- this_cpu, retries);
- goto dump_cpu_list_and_out;
-
-fatal_mondo_error:
- printk(KERN_CRIT "CPU[%d]: Unexpected SUN4V mondo error %lu\n",
- this_cpu, status);
- printk(KERN_CRIT "CPU[%d]: Args were cnt(%d) cpulist_pa(%lx) "
- "mondo_block_pa(%lx)\n",
- this_cpu, cnt, tb->cpu_list_pa, tb->cpu_mondo_block_pa);
-
-dump_cpu_list_and_out:
- printk(KERN_CRIT "CPU[%d]: CPU list [ ", this_cpu);
- for (i = 0; i < cnt; i++)
- printk("%u ", cpu_list[i]);
- printk("]\n");
+ /* some cpus being non-responsive to the cpu mondo */
+ pr_crit("CPU[%d]: SUN4V mondo timeout, cpu(%d) made no forward progress after %d retries. Total target cpus(%d).\n",
+ this_cpu, first_cpu, (tot_retries + retries), tot_cpus);
+ panic("SUN4V mondo timeout panic\n");
}
static void (*xcall_deliver_impl)(struct trap_per_cpu *, int);
diff --git a/arch/sparc/kernel/sun4v_ivec.S b/arch/sparc/kernel/sun4v_ivec.S
index 559bc5e..3463199 100644
--- a/arch/sparc/kernel/sun4v_ivec.S
+++ b/arch/sparc/kernel/sun4v_ivec.S
@@ -26,6 +26,21 @@
ldxa [%g0] ASI_SCRATCHPAD, %g4
sub %g4, TRAP_PER_CPU_FAULT_INFO, %g4
+ /* Get smp_processor_id() into %g3 */
+ sethi %hi(trap_block), %g5
+ or %g5, %lo(trap_block), %g5
+ sub %g4, %g5, %g3
+ srlx %g3, TRAP_BLOCK_SZ_SHIFT, %g3
+
+ /* Increment cpu_mondo_counter[smp_processor_id()] */
+ sethi %hi(cpu_mondo_counter), %g5
+ or %g5, %lo(cpu_mondo_counter), %g5
+ sllx %g3, 3, %g3
+ add %g5, %g3, %g5
+ ldx [%g5], %g3
+ add %g3, 1, %g3
+ stx %g3, [%g5]
+
/* Get CPU mondo queue base phys address into %g7. */
ldx [%g4 + TRAP_PER_CPU_CPU_MONDO_PA], %g7
diff --git a/arch/sparc/kernel/traps_64.c b/arch/sparc/kernel/traps_64.c
index 196ee5e..ad31af1 100644
--- a/arch/sparc/kernel/traps_64.c
+++ b/arch/sparc/kernel/traps_64.c
@@ -2733,6 +2733,7 @@
}
}
+u64 cpu_mondo_counter[NR_CPUS] = {0};
struct trap_per_cpu trap_block[NR_CPUS];
EXPORT_SYMBOL(trap_block);
diff --git a/arch/sparc/kernel/tsb.S b/arch/sparc/kernel/tsb.S
index 07c0df9..db872db 100644
--- a/arch/sparc/kernel/tsb.S
+++ b/arch/sparc/kernel/tsb.S
@@ -360,6 +360,7 @@
* %o1: TSB base config pointer
* %o2: TSB huge config pointer, or NULL if none
* %o3: Hypervisor TSB descriptor physical address
+ * %o4: Secondary context to load, if non-zero
*
* We have to run this whole thing with interrupts
* disabled so that the current cpu doesn't change
@@ -372,6 +373,17 @@
rdpr %pstate, %g1
wrpr %g1, PSTATE_IE, %pstate
+ brz,pn %o4, 1f
+ mov SECONDARY_CONTEXT, %o5
+
+661: stxa %o4, [%o5] ASI_DMMU
+ .section .sun4v_1insn_patch, "ax"
+ .word 661b
+ stxa %o4, [%o5] ASI_MMU
+ .previous
+ flush %g6
+
+1:
TRAP_LOAD_TRAP_BLOCK(%g2, %g3)
stx %o0, [%g2 + TRAP_PER_CPU_PGD_PADDR]
diff --git a/arch/sparc/lib/U3memcpy.S b/arch/sparc/lib/U3memcpy.S
index 54f9870..5a8cb37 100644
--- a/arch/sparc/lib/U3memcpy.S
+++ b/arch/sparc/lib/U3memcpy.S
@@ -145,13 +145,13 @@
ENTRY(U3_retl_o2_and_7_plus_GS)
and %o2, 7, %o2
retl
- add %o2, GLOBAL_SPARE, %o2
+ add %o2, GLOBAL_SPARE, %o0
ENDPROC(U3_retl_o2_and_7_plus_GS)
ENTRY(U3_retl_o2_and_7_plus_GS_plus_8)
add GLOBAL_SPARE, 8, GLOBAL_SPARE
and %o2, 7, %o2
retl
- add %o2, GLOBAL_SPARE, %o2
+ add %o2, GLOBAL_SPARE, %o0
ENDPROC(U3_retl_o2_and_7_plus_GS_plus_8)
#endif
diff --git a/arch/sparc/lib/atomic_64.S b/arch/sparc/lib/atomic_64.S
index 1c6a1bd..ce17c30 100644
--- a/arch/sparc/lib/atomic_64.S
+++ b/arch/sparc/lib/atomic_64.S
@@ -62,19 +62,23 @@
ENDPROC(atomic_fetch_##op); \
EXPORT_SYMBOL(atomic_fetch_##op);
-#define ATOMIC_OPS(op) ATOMIC_OP(op) ATOMIC_OP_RETURN(op) ATOMIC_FETCH_OP(op)
+ATOMIC_OP(add)
+ATOMIC_OP_RETURN(add)
+ATOMIC_FETCH_OP(add)
-ATOMIC_OPS(add)
-ATOMIC_OPS(sub)
+ATOMIC_OP(sub)
+ATOMIC_OP_RETURN(sub)
+ATOMIC_FETCH_OP(sub)
-#undef ATOMIC_OPS
-#define ATOMIC_OPS(op) ATOMIC_OP(op) ATOMIC_FETCH_OP(op)
+ATOMIC_OP(and)
+ATOMIC_FETCH_OP(and)
-ATOMIC_OPS(and)
-ATOMIC_OPS(or)
-ATOMIC_OPS(xor)
+ATOMIC_OP(or)
+ATOMIC_FETCH_OP(or)
-#undef ATOMIC_OPS
+ATOMIC_OP(xor)
+ATOMIC_FETCH_OP(xor)
+
#undef ATOMIC_FETCH_OP
#undef ATOMIC_OP_RETURN
#undef ATOMIC_OP
@@ -124,19 +128,23 @@
ENDPROC(atomic64_fetch_##op); \
EXPORT_SYMBOL(atomic64_fetch_##op);
-#define ATOMIC64_OPS(op) ATOMIC64_OP(op) ATOMIC64_OP_RETURN(op) ATOMIC64_FETCH_OP(op)
+ATOMIC64_OP(add)
+ATOMIC64_OP_RETURN(add)
+ATOMIC64_FETCH_OP(add)
-ATOMIC64_OPS(add)
-ATOMIC64_OPS(sub)
+ATOMIC64_OP(sub)
+ATOMIC64_OP_RETURN(sub)
+ATOMIC64_FETCH_OP(sub)
-#undef ATOMIC64_OPS
-#define ATOMIC64_OPS(op) ATOMIC64_OP(op) ATOMIC64_FETCH_OP(op)
+ATOMIC64_OP(and)
+ATOMIC64_FETCH_OP(and)
-ATOMIC64_OPS(and)
-ATOMIC64_OPS(or)
-ATOMIC64_OPS(xor)
+ATOMIC64_OP(or)
+ATOMIC64_FETCH_OP(or)
-#undef ATOMIC64_OPS
+ATOMIC64_OP(xor)
+ATOMIC64_FETCH_OP(xor)
+
#undef ATOMIC64_FETCH_OP
#undef ATOMIC64_OP_RETURN
#undef ATOMIC64_OP
diff --git a/arch/sparc/lib/checksum_64.S b/arch/sparc/lib/checksum_64.S
index f673217..6cfa521 100644
--- a/arch/sparc/lib/checksum_64.S
+++ b/arch/sparc/lib/checksum_64.S
@@ -38,6 +38,7 @@
.align 32
.globl csum_partial
+ .type csum_partial,#function
EXPORT_SYMBOL(csum_partial)
csum_partial: /* %o0=buff, %o1=len, %o2=sum */
prefetch [%o0 + 0x000], #n_reads
diff --git a/arch/sparc/lib/csum_copy.S b/arch/sparc/lib/csum_copy.S
index 0ecbafc..b1051e7 100644
--- a/arch/sparc/lib/csum_copy.S
+++ b/arch/sparc/lib/csum_copy.S
@@ -65,6 +65,7 @@
add %o5, %o4, %o4
.globl FUNC_NAME
+ .type FUNC_NAME,#function
EXPORT_SYMBOL(FUNC_NAME)
FUNC_NAME: /* %o0=src, %o1=dst, %o2=len, %o3=sum */
LOAD(prefetch, %o0 + 0x000, #n_reads)
diff --git a/arch/sparc/lib/memscan_64.S b/arch/sparc/lib/memscan_64.S
index daa96f4..5efee1f 100644
--- a/arch/sparc/lib/memscan_64.S
+++ b/arch/sparc/lib/memscan_64.S
@@ -14,6 +14,8 @@
.text
.align 32
.globl __memscan_zero, __memscan_generic
+ .type __memscan_zero,#function
+ .type __memscan_generic,#function
.globl memscan
EXPORT_SYMBOL(__memscan_zero)
EXPORT_SYMBOL(__memscan_generic)
diff --git a/arch/sparc/lib/memset.S b/arch/sparc/lib/memset.S
index bb539b4..e23338d 100644
--- a/arch/sparc/lib/memset.S
+++ b/arch/sparc/lib/memset.S
@@ -63,6 +63,7 @@
__bzero_begin:
.globl __bzero
+ .type __bzero,#function
.globl memset
EXPORT_SYMBOL(__bzero)
EXPORT_SYMBOL(memset)
diff --git a/arch/sparc/mm/gup.c b/arch/sparc/mm/gup.c
index cd0e32b..f80cfc6 100644
--- a/arch/sparc/mm/gup.c
+++ b/arch/sparc/mm/gup.c
@@ -78,8 +78,8 @@
return 0;
refs = 0;
- head = pmd_page(pmd);
- page = head + ((addr & ~PMD_MASK) >> PAGE_SHIFT);
+ page = pmd_page(pmd) + ((addr & ~PMD_MASK) >> PAGE_SHIFT);
+ head = compound_head(page);
do {
VM_BUG_ON(compound_head(page) != head);
pages[*nr] = page;
diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c
index 3c40ebd..fed73f1 100644
--- a/arch/sparc/mm/init_64.c
+++ b/arch/sparc/mm/init_64.c
@@ -325,6 +325,29 @@
}
#ifdef CONFIG_HUGETLB_PAGE
+static void __init add_huge_page_size(unsigned long size)
+{
+ unsigned int order;
+
+ if (size_to_hstate(size))
+ return;
+
+ order = ilog2(size) - PAGE_SHIFT;
+ hugetlb_add_hstate(order);
+}
+
+static int __init hugetlbpage_init(void)
+{
+ add_huge_page_size(1UL << HPAGE_64K_SHIFT);
+ add_huge_page_size(1UL << HPAGE_SHIFT);
+ add_huge_page_size(1UL << HPAGE_256MB_SHIFT);
+ add_huge_page_size(1UL << HPAGE_2GB_SHIFT);
+
+ return 0;
+}
+
+arch_initcall(hugetlbpage_init);
+
static int __init setup_hugepagesz(char *string)
{
unsigned long long hugepage_size;
@@ -364,7 +387,7 @@
goto out;
}
- hugetlb_add_hstate(hugepage_shift - PAGE_SHIFT);
+ add_huge_page_size(hugepage_size);
rc = 1;
out:
diff --git a/arch/sparc/power/hibernate.c b/arch/sparc/power/hibernate.c
index 17bd2e1..df707a8 100644
--- a/arch/sparc/power/hibernate.c
+++ b/arch/sparc/power/hibernate.c
@@ -35,6 +35,5 @@
{
struct mm_struct *mm = current->active_mm;
- load_secondary_context(mm);
- tsb_context_switch(mm);
+ tsb_context_switch_ctx(mm, CTX_HWBITS(mm->context));
}
diff --git a/arch/tile/include/asm/Kbuild b/arch/tile/include/asm/Kbuild
index 16f0b08..d28d2b8 100644
--- a/arch/tile/include/asm/Kbuild
+++ b/arch/tile/include/asm/Kbuild
@@ -2,37 +2,18 @@
generic-y += bugs.h
generic-y += clkdev.h
generic-y += emergency-restart.h
-generic-y += errno.h
generic-y += exec.h
generic-y += extable.h
generic-y += fb.h
-generic-y += fcntl.h
generic-y += hw_irq.h
-generic-y += ioctl.h
-generic-y += ioctls.h
-generic-y += ipcbuf.h
generic-y += irq_regs.h
generic-y += local.h
generic-y += local64.h
generic-y += mcs_spinlock.h
generic-y += mm-arch-hooks.h
-generic-y += msgbuf.h
-generic-y += param.h
generic-y += parport.h
-generic-y += poll.h
-generic-y += posix_types.h
generic-y += preempt.h
-generic-y += resource.h
generic-y += seccomp.h
-generic-y += sembuf.h
generic-y += serial.h
-generic-y += shmbuf.h
-generic-y += shmparam.h
-generic-y += socket.h
-generic-y += sockios.h
-generic-y += statfs.h
-generic-y += termbits.h
-generic-y += termios.h
generic-y += trace_clock.h
-generic-y += types.h
generic-y += xor.h
diff --git a/arch/tile/include/asm/uaccess.h b/arch/tile/include/asm/uaccess.h
index d0c79c1..cb4fbe7 100644
--- a/arch/tile/include/asm/uaccess.h
+++ b/arch/tile/include/asm/uaccess.h
@@ -19,7 +19,6 @@
* User space memory access functions
*/
#include <linux/mm.h>
-#include <asm-generic/uaccess-unaligned.h>
#include <asm/processor.h>
#include <asm/page.h>
diff --git a/arch/tile/include/uapi/arch/abi.h b/arch/tile/include/uapi/arch/abi.h
index c55a3d4..328e622 100644
--- a/arch/tile/include/uapi/arch/abi.h
+++ b/arch/tile/include/uapi/arch/abi.h
@@ -20,58 +20,17 @@
#ifndef __ARCH_ABI_H__
-#if !defined __need_int_reg_t && !defined __DOXYGEN__
-# define __ARCH_ABI_H__
-# include <arch/chip.h>
-#endif
-
-/* Provide the basic machine types. */
-#ifndef __INT_REG_BITS
-
-/** Number of bits in a register. */
-#if defined __tilegx__
-# define __INT_REG_BITS 64
-#elif defined __tilepro__
-# define __INT_REG_BITS 32
-#elif !defined __need_int_reg_t
+#ifndef __tile__ /* support uncommon use of arch headers in non-tile builds */
# include <arch/chip.h>
# define __INT_REG_BITS CHIP_WORD_SIZE()
-#else
-# error Unrecognized architecture with __need_int_reg_t
#endif
-#if __INT_REG_BITS == 64
+#include <arch/intreg.h>
-#ifndef __ASSEMBLER__
-/** Unsigned type that can hold a register. */
-typedef unsigned long long __uint_reg_t;
-
-/** Signed type that can hold a register. */
-typedef long long __int_reg_t;
-#endif
-
-/** String prefix to use for printf(). */
-#define __INT_REG_FMT "ll"
-
-#else
-
-#ifndef __ASSEMBLER__
-/** Unsigned type that can hold a register. */
-typedef unsigned long __uint_reg_t;
-
-/** Signed type that can hold a register. */
-typedef long __int_reg_t;
-#endif
-
-/** String prefix to use for printf(). */
-#define __INT_REG_FMT "l"
-
-#endif
-#endif /* __INT_REG_BITS */
-
-
+/* __need_int_reg_t is deprecated: just include <arch/intreg.h> */
#ifndef __need_int_reg_t
+#define __ARCH_ABI_H__
#ifndef __ASSEMBLER__
/** Unsigned type that can hold a register. */
diff --git a/arch/tile/include/uapi/arch/intreg.h b/arch/tile/include/uapi/arch/intreg.h
new file mode 100644
index 0000000..1cf2fbf
--- /dev/null
+++ b/arch/tile/include/uapi/arch/intreg.h
@@ -0,0 +1,70 @@
+/*
+ * Copyright 2017 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+/**
+ * @file
+ *
+ * Provide types and defines for the type that can hold a register,
+ * in the implementation namespace.
+ */
+
+#ifndef __ARCH_INTREG_H__
+#define __ARCH_INTREG_H__
+
+/*
+ * Get number of bits in a register. __INT_REG_BITS may be defined
+ * prior to including this header to force a particular bit width.
+ */
+
+#ifndef __INT_REG_BITS
+# if defined __tilegx__
+# define __INT_REG_BITS 64
+# elif defined __tilepro__
+# define __INT_REG_BITS 32
+# else
+# error Unrecognized architecture
+# endif
+#endif
+
+#if __INT_REG_BITS == 64
+
+# ifndef __ASSEMBLER__
+/** Unsigned type that can hold a register. */
+typedef unsigned long long __uint_reg_t;
+
+/** Signed type that can hold a register. */
+typedef long long __int_reg_t;
+# endif
+
+/** String prefix to use for printf(). */
+# define __INT_REG_FMT "ll"
+
+#elif __INT_REG_BITS == 32
+
+# ifndef __ASSEMBLER__
+/** Unsigned type that can hold a register. */
+typedef unsigned long __uint_reg_t;
+
+/** Signed type that can hold a register. */
+typedef long __int_reg_t;
+# endif
+
+/** String prefix to use for printf(). */
+# define __INT_REG_FMT "l"
+
+#else
+# error Unrecognized value of __INT_REG_BITS
+#endif
+
+#endif /* !__ARCH_INTREG_H__ */
diff --git a/arch/tile/include/uapi/asm/Kbuild b/arch/tile/include/uapi/asm/Kbuild
index 0c74c3c..5711de0 100644
--- a/arch/tile/include/uapi/asm/Kbuild
+++ b/arch/tile/include/uapi/asm/Kbuild
@@ -1,4 +1,23 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
+generic-y += errno.h
+generic-y += fcntl.h
+generic-y += ioctl.h
+generic-y += ioctls.h
+generic-y += ipcbuf.h
+generic-y += msgbuf.h
+generic-y += param.h
+generic-y += poll.h
+generic-y += posix_types.h
+generic-y += resource.h
+generic-y += sembuf.h
+generic-y += shmbuf.h
+generic-y += shmparam.h
+generic-y += socket.h
+generic-y += sockios.h
+generic-y += statfs.h
+generic-y += termbits.h
+generic-y += termios.h
+generic-y += types.h
generic-y += ucontext.h
diff --git a/arch/tile/mm/init.c b/arch/tile/mm/init.c
index 3a97e4d..5f757e0 100644
--- a/arch/tile/mm/init.c
+++ b/arch/tile/mm/init.c
@@ -857,36 +857,6 @@
#endif
}
-/*
- * this is for the non-NUMA, single node SMP system case.
- * Specifically, in the case of x86, we will always add
- * memory to the highmem for now.
- */
-#ifndef CONFIG_NEED_MULTIPLE_NODES
-int arch_add_memory(u64 start, u64 size, bool for_device)
-{
- struct pglist_data *pgdata = &contig_page_data;
- struct zone *zone = pgdata->node_zones + MAX_NR_ZONES-1;
- unsigned long start_pfn = start >> PAGE_SHIFT;
- unsigned long nr_pages = size >> PAGE_SHIFT;
-
- return __add_pages(zone, start_pfn, nr_pages);
-}
-
-int remove_memory(u64 start, u64 size)
-{
- return -EINVAL;
-}
-
-#ifdef CONFIG_MEMORY_HOTREMOVE
-int arch_remove_memory(u64 start, u64 size)
-{
- /* TODO */
- return -EBUSY;
-}
-#endif
-#endif
-
struct kmem_cache *pgd_cache;
void __init pgtable_cache_init(void)
diff --git a/arch/um/Makefile b/arch/um/Makefile
index 0ca46ede..6ca4f66 100644
--- a/arch/um/Makefile
+++ b/arch/um/Makefile
@@ -59,10 +59,14 @@
# Same things for in6addr_loopback and mktime - found in libc. For these two we
# only get link-time error, luckily.
#
+# -Dlongjmp=kernel_longjmp prevents anything from referencing the libpthread.a
+# embedded copy of longjmp, same thing for setjmp.
+#
# These apply to USER_CFLAGS to.
KBUILD_CFLAGS += $(CFLAGS) $(CFLAGS-y) -D__arch_um__ \
$(ARCH_INCLUDE) $(MODE_INCLUDE) -Dvmap=kernel_vmap \
+ -Dlongjmp=kernel_longjmp -Dsetjmp=kernel_setjmp \
-Din6addr_loopback=kernel_in6addr_loopback \
-Din6addr_any=kernel_in6addr_any -Dstrrchr=kernel_strrchr
diff --git a/arch/um/drivers/stdio_console.c b/arch/um/drivers/stdio_console.c
index 7b361f3..c90817b 100644
--- a/arch/um/drivers/stdio_console.c
+++ b/arch/um/drivers/stdio_console.c
@@ -192,6 +192,9 @@
static int console_chan_setup(char *str)
{
+ if (!strncmp(str, "sole=", 5)) /* console= option specifies tty */
+ return 0;
+
line_setup(vt_conf, MAX_TTYS, &def_conf, str, "console");
return 1;
}
diff --git a/arch/um/include/asm/common.lds.S b/arch/um/include/asm/common.lds.S
index 1330553..9e6d599 100644
--- a/arch/um/include/asm/common.lds.S
+++ b/arch/um/include/asm/common.lds.S
@@ -15,7 +15,7 @@
PROVIDE (_unprotected_end = .);
. = ALIGN(4096);
- .note : { *(.note.*) }
+ NOTES
EXCEPTION_TABLE(0)
BUG_TABLE
diff --git a/arch/um/include/asm/io.h b/arch/um/include/asm/io.h
new file mode 100644
index 0000000..8f35d57
--- /dev/null
+++ b/arch/um/include/asm/io.h
@@ -0,0 +1,17 @@
+#ifndef _ASM_UM_IO_H
+#define _ASM_UM_IO_H
+
+#define ioremap ioremap
+static inline void __iomem *ioremap(phys_addr_t offset, size_t size)
+{
+ return (void __iomem *)(unsigned long)offset;
+}
+
+#define iounmap iounmap
+static inline void iounmap(void __iomem *addr)
+{
+}
+
+#include <asm-generic/io.h>
+
+#endif
diff --git a/arch/um/include/shared/os.h b/arch/um/include/shared/os.h
index cd1fa97..574e03f 100644
--- a/arch/um/include/shared/os.h
+++ b/arch/um/include/shared/os.h
@@ -242,6 +242,10 @@
extern void os_dump_core(void) __attribute__ ((noreturn));
extern void um_early_printk(const char *s, unsigned int n);
extern void os_fix_helper_signals(void);
+extern void os_info(const char *fmt, ...)
+ __attribute__ ((format (printf, 1, 2)));
+extern void os_warn(const char *fmt, ...)
+ __attribute__ ((format (printf, 1, 2)));
/* time.c */
extern void os_idle_sleep(unsigned long long nsecs);
diff --git a/arch/um/include/shared/skas/stub-data.h b/arch/um/include/shared/skas/stub-data.h
index a9deece..13f404e 100644
--- a/arch/um/include/shared/skas/stub-data.h
+++ b/arch/um/include/shared/skas/stub-data.h
@@ -8,8 +8,6 @@
#ifndef __STUB_DATA_H
#define __STUB_DATA_H
-#include <time.h>
-
struct stub_data {
unsigned long offset;
int fd;
diff --git a/arch/um/kernel/physmem.c b/arch/um/kernel/physmem.c
index 4c9861b..f02596e 100644
--- a/arch/um/kernel/physmem.c
+++ b/arch/um/kernel/physmem.c
@@ -89,8 +89,8 @@
offset = uml_reserved - uml_physmem;
map_size = len - offset;
if(map_size <= 0) {
- printf("Too few physical memory! Needed=%d, given=%d\n",
- offset, len);
+ os_warn("Too few physical memory! Needed=%lu, given=%lu\n",
+ offset, len);
exit(1);
}
@@ -99,9 +99,9 @@
err = os_map_memory((void *) uml_reserved, physmem_fd, offset,
map_size, 1, 1, 1);
if (err < 0) {
- printf("setup_physmem - mapping %ld bytes of memory at 0x%p "
- "failed - errno = %d\n", map_size,
- (void *) uml_reserved, err);
+ os_warn("setup_physmem - mapping %ld bytes of memory at 0x%p "
+ "failed - errno = %d\n", map_size,
+ (void *) uml_reserved, err);
exit(1);
}
diff --git a/arch/um/kernel/trap.c b/arch/um/kernel/trap.c
index 5915887..4e6fcb3 100644
--- a/arch/um/kernel/trap.c
+++ b/arch/um/kernel/trap.c
@@ -183,6 +183,16 @@
os_dump_core();
}
+/**
+ * segv_handler() - the SIGSEGV handler
+ * @sig: the signal number
+ * @unused_si: the signal info struct; unused in this handler
+ * @regs: the ptrace register information
+ *
+ * The handler first extracts the faultinfo from the UML ptrace regs struct.
+ * If the userfault did not happen in an UML userspace process, bad_segv is called.
+ * Otherwise the signal did happen in a cloned userspace process, handle it.
+ */
void segv_handler(int sig, struct siginfo *unused_si, struct uml_pt_regs *regs)
{
struct faultinfo * fi = UPT_FAULTINFO(regs);
diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c
index 7b56401..f433690 100644
--- a/arch/um/kernel/um_arch.c
+++ b/arch/um/kernel/um_arch.c
@@ -34,7 +34,7 @@
static void __init add_arg(char *arg)
{
if (strlen(command_line) + strlen(arg) + 1 > COMMAND_LINE_SIZE) {
- printf("add_arg: Too many command line arguments!\n");
+ os_warn("add_arg: Too many command line arguments!\n");
exit(1);
}
if (strlen(command_line) > 0)
@@ -120,6 +120,7 @@
static int __init uml_version_setup(char *line, int *add)
{
+ /* Explicitly use printf() to show version in stdout */
printf("%s\n", init_utsname()->release);
exit(0);
@@ -148,8 +149,8 @@
static int __init no_skas_debug_setup(char *line, int *add)
{
- printf("'debug' is not necessary to gdb UML in skas mode - run \n");
- printf("'gdb linux'\n");
+ os_warn("'debug' is not necessary to gdb UML in skas mode - run\n");
+ os_warn("'gdb linux'\n");
return 0;
}
@@ -165,6 +166,7 @@
printf(usage_string, init_utsname()->release);
p = &__uml_help_start;
+ /* Explicitly use printf() to show help in stdout */
while (p < &__uml_help_end) {
printf("%s", *p);
p++;
@@ -283,8 +285,8 @@
diff = UML_ROUND_UP(brk_start) - UML_ROUND_UP(&_end);
if (diff > 1024 * 1024) {
- printf("Adding %ld bytes to physical memory to account for "
- "exec-shield gap\n", diff);
+ os_info("Adding %ld bytes to physical memory to account for "
+ "exec-shield gap\n", diff);
physmem_size += UML_ROUND_UP(brk_start) - UML_ROUND_UP(&_end);
}
@@ -324,8 +326,8 @@
end_vm = start_vm + virtmem_size;
if (virtmem_size < physmem_size)
- printf("Kernel virtual memory size shrunk to %lu bytes\n",
- virtmem_size);
+ os_info("Kernel virtual memory size shrunk to %lu bytes\n",
+ virtmem_size);
os_flush_stdout();
diff --git a/arch/um/kernel/umid.c b/arch/um/kernel/umid.c
index f6cc3bd..10bf4ac 100644
--- a/arch/um/kernel/umid.c
+++ b/arch/um/kernel/umid.c
@@ -16,14 +16,14 @@
int err;
if (umid_inited) {
- printf("umid already set\n");
+ os_warn("umid already set\n");
return 0;
}
*add = 0;
err = set_umid(name);
if (err == -EEXIST)
- printf("umid '%s' already in use\n", name);
+ os_warn("umid '%s' already in use\n", name);
else if (!err)
umid_inited = 1;
diff --git a/arch/um/os-Linux/execvp.c b/arch/um/os-Linux/execvp.c
index 8fb25ca..84a0777 100644
--- a/arch/um/os-Linux/execvp.c
+++ b/arch/um/os-Linux/execvp.c
@@ -136,7 +136,7 @@
int ret;
argc--;
if (!argc) {
- fprintf(stderr, "Not enough arguments\n");
+ os_warn("Not enough arguments\n");
return 1;
}
argv++;
diff --git a/arch/um/os-Linux/main.c b/arch/um/os-Linux/main.c
index 9d499de..5f970ec 100644
--- a/arch/um/os-Linux/main.c
+++ b/arch/um/os-Linux/main.c
@@ -74,8 +74,8 @@
action.sa_restorer = NULL;
action.sa_handler = last_ditch_exit;
if (sigaction(sig, &action, NULL) < 0) {
- printf("failed to install handler for signal %d - errno = %d\n",
- sig, errno);
+ os_warn("failed to install handler for signal %d "
+ "- errno = %d\n", sig, errno);
exit(1);
}
}
@@ -175,7 +175,7 @@
/* disable SIGIO for the fds and set SIGIO to be ignored */
err = deactivate_all_fds();
if (err)
- printf("deactivate_all_fds failed, errno = %d\n", -err);
+ os_warn("deactivate_all_fds failed, errno = %d\n", -err);
/*
* Let any pending signals fire now. This ensures
@@ -184,14 +184,13 @@
*/
unblock_signals();
+ os_info("\n");
/* Reboot */
if (ret) {
- printf("\n");
execvp(new_argv[0], new_argv);
perror("Failed to exec kernel");
ret = 1;
}
- printf("\n");
return uml_exitcode;
}
diff --git a/arch/um/os-Linux/mem.c b/arch/um/os-Linux/mem.c
index 8b17676..e162a95 100644
--- a/arch/um/os-Linux/mem.c
+++ b/arch/um/os-Linux/mem.c
@@ -25,13 +25,13 @@
{
struct statfs st;
- printf("Checking if %s is on tmpfs...", dir);
+ os_info("Checking if %s is on tmpfs...", dir);
if (statfs(dir, &st) < 0) {
- printf("%s\n", strerror(errno));
+ os_info("%s\n", strerror(errno));
} else if (st.f_type != TMPFS_MAGIC) {
- printf("no\n");
+ os_info("no\n");
} else {
- printf("OK\n");
+ os_info("OK\n");
return 0;
}
return -1;
@@ -61,18 +61,18 @@
int i;
const char *dir;
- printf("Checking environment variables for a tempdir...");
+ os_info("Checking environment variables for a tempdir...");
for (i = 0; vars[i]; i++) {
dir = getenv(vars[i]);
if ((dir != NULL) && (*dir != '\0')) {
- printf("%s\n", dir);
+ os_info("%s\n", dir);
if (check_tmpfs(dir) >= 0)
goto done;
else
goto warn;
}
}
- printf("none found\n");
+ os_info("none found\n");
for (i = 0; tmpfs_dirs[i]; i++) {
dir = tmpfs_dirs[i];
@@ -82,7 +82,7 @@
dir = fallback_dir;
warn:
- printf("Warning: tempdir %s is not on tmpfs\n", dir);
+ os_warn("Warning: tempdir %s is not on tmpfs\n", dir);
done:
/* Make a copy since getenv results may not remain valid forever. */
return strdup(dir);
@@ -100,7 +100,7 @@
if (tempdir == NULL) {
tempdir = choose_tempdir();
if (tempdir == NULL) {
- fprintf(stderr, "Failed to choose tempdir: %s\n",
+ os_warn("Failed to choose tempdir: %s\n",
strerror(errno));
return -1;
}
@@ -125,7 +125,7 @@
strcat(tempname, template);
fd = mkstemp(tempname);
if (fd < 0) {
- fprintf(stderr, "open - cannot create %s: %s\n", tempname,
+ os_warn("open - cannot create %s: %s\n", tempname,
strerror(errno));
goto out;
}
@@ -194,16 +194,16 @@
addr = mmap(NULL, UM_KERN_PAGE_SIZE,
PROT_READ | PROT_WRITE | PROT_EXEC, MAP_PRIVATE, fd, 0);
- printf("Checking PROT_EXEC mmap in %s...", tempdir);
+ os_info("Checking PROT_EXEC mmap in %s...", tempdir);
if (addr == MAP_FAILED) {
err = errno;
- printf("%s\n", strerror(err));
+ os_warn("%s\n", strerror(err));
close(fd);
if (err == EPERM)
- printf("%s must be not mounted noexec\n", tempdir);
+ os_warn("%s must be not mounted noexec\n", tempdir);
exit(1);
}
- printf("OK\n");
+ os_info("OK\n");
munmap(addr, UM_KERN_PAGE_SIZE);
close(fd);
diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c
index 03b3c4c..819d686 100644
--- a/arch/um/os-Linux/skas/process.c
+++ b/arch/um/os-Linux/skas/process.c
@@ -108,7 +108,7 @@
wait_stub_done(pid);
/*
- * faultinfo is prepared by the stub-segv-handler at start of
+ * faultinfo is prepared by the stub_segv_handler at start of
* the stub stack page. We just have to copy it.
*/
memcpy(fi, (void *)current_stub_stack(), sizeof(*fi));
@@ -175,6 +175,21 @@
extern char __syscall_stub_start[];
+/**
+ * userspace_tramp() - userspace trampoline
+ * @stack: pointer to the new userspace stack page, can be NULL, if? FIXME:
+ *
+ * The userspace trampoline is used to setup a new userspace process in start_userspace() after it was clone()'ed.
+ * This function will run on a temporary stack page.
+ * It ptrace()'es itself, then
+ * Two pages are mapped into the userspace address space:
+ * - STUB_CODE (with EXEC), which contains the skas stub code
+ * - STUB_DATA (with R/W), which contains a data page that is used to transfer certain data between the UML userspace process and the UML kernel.
+ * Also for the userspace process a SIGSEGV handler is installed to catch pagefaults in the userspace process.
+ * And last the process stops itself to give control to the UML kernel for this userspace process.
+ *
+ * Return: Always zero, otherwise the current userspace process is ended with non null exit() call
+ */
static int userspace_tramp(void *stack)
{
void *addr;
@@ -236,12 +251,24 @@
int userspace_pid[NR_CPUS];
+/**
+ * start_userspace() - prepare a new userspace process
+ * @stub_stack: pointer to the stub stack. Can be NULL, if? FIXME:
+ *
+ * Setups a new temporary stack page that is used while userspace_tramp() runs
+ * Clones the kernel process into a new userspace process, with FDs only.
+ *
+ * Return: When positive: the process id of the new userspace process,
+ * when negative: an error number.
+ * FIXME: can PIDs become negative?!
+ */
int start_userspace(unsigned long stub_stack)
{
void *stack;
unsigned long sp;
int pid, status, n, flags, err;
+ /* setup a temporary stack page */
stack = mmap(NULL, UM_KERN_PAGE_SIZE,
PROT_READ | PROT_WRITE | PROT_EXEC,
MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
@@ -252,10 +279,12 @@
return err;
}
+ /* set stack pointer to the end of the stack page, so it can grow downwards */
sp = (unsigned long) stack + UM_KERN_PAGE_SIZE - sizeof(void *);
flags = CLONE_FILES | SIGCHLD;
+ /* clone into new userspace process */
pid = clone(userspace_tramp, (void *) sp, flags, (void *) stub_stack);
if (pid < 0) {
err = -errno;
@@ -323,11 +352,17 @@
* fail. In this case, there is nothing to do but
* just kill the process.
*/
- if (ptrace(PTRACE_SETREGS, pid, 0, regs->gp))
+ if (ptrace(PTRACE_SETREGS, pid, 0, regs->gp)) {
+ printk(UM_KERN_ERR "userspace - ptrace set regs "
+ "failed, errno = %d\n", errno);
fatal_sigsegv();
+ }
- if (put_fp_registers(pid, regs->fp))
+ if (put_fp_registers(pid, regs->fp)) {
+ printk(UM_KERN_ERR "userspace - ptrace set fp regs "
+ "failed, errno = %d\n", errno);
fatal_sigsegv();
+ }
/* Now we set local_using_sysemu to be used for one loop */
local_using_sysemu = get_using_sysemu();
diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c
index 22a358e..b1b6b75 100644
--- a/arch/um/os-Linux/start_up.c
+++ b/arch/um/os-Linux/start_up.c
@@ -166,7 +166,7 @@
unsigned long regs[MAX_REG_NR];
int pid, n, status, count=0;
- non_fatal("Checking syscall emulation patch for ptrace...");
+ os_info("Checking syscall emulation patch for ptrace...");
sysemu_supported = 0;
pid = start_ptraced_child();
@@ -199,10 +199,10 @@
goto fail_stopped;
sysemu_supported = 1;
- non_fatal("OK\n");
+ os_info("OK\n");
set_using_sysemu(!force_sysemu_disabled);
- non_fatal("Checking advanced syscall emulation patch for ptrace...");
+ os_info("Checking advanced syscall emulation patch for ptrace...");
pid = start_ptraced_child();
if ((ptrace(PTRACE_OLDSETOPTIONS, pid, 0,
@@ -244,7 +244,7 @@
goto fail_stopped;
sysemu_supported = 2;
- non_fatal("OK\n");
+ os_info("OK\n");
if (!force_sysemu_disabled)
set_using_sysemu(sysemu_supported);
@@ -260,7 +260,7 @@
{
int pid, syscall, n, status;
- non_fatal("Checking that ptrace can change system call numbers...");
+ os_info("Checking that ptrace can change system call numbers...");
pid = start_ptraced_child();
if ((ptrace(PTRACE_OLDSETOPTIONS, pid, 0,
@@ -292,7 +292,7 @@
}
}
stop_ptraced_child(pid, 0, 1);
- non_fatal("OK\n");
+ os_info("OK\n");
check_sysemu();
}
@@ -308,15 +308,17 @@
return;
}
- printf("Core dump limits :\n\tsoft - ");
+ os_info("Core dump limits :\n\tsoft - ");
if (lim.rlim_cur == RLIM_INFINITY)
- printf("NONE\n");
- else printf("%lu\n", lim.rlim_cur);
+ os_info("NONE\n");
+ else
+ os_info("%llu\n", (unsigned long long)lim.rlim_cur);
- printf("\thard - ");
+ os_info("\thard - ");
if (lim.rlim_max == RLIM_INFINITY)
- printf("NONE\n");
- else printf("%lu\n", lim.rlim_max);
+ os_info("NONE\n");
+ else
+ os_info("%llu\n", (unsigned long long)lim.rlim_max);
}
void __init os_early_checks(void)
@@ -349,7 +351,7 @@
driver = str;
file = strchr(str,',');
if (file == NULL) {
- fprintf(stderr, "parse_iomem : failed to parse iomem\n");
+ os_warn("parse_iomem : failed to parse iomem\n");
goto out;
}
*file = '\0';
diff --git a/arch/um/os-Linux/umid.c b/arch/um/os-Linux/umid.c
index c1dc892..998fbb4 100644
--- a/arch/um/os-Linux/umid.c
+++ b/arch/um/os-Linux/umid.c
@@ -35,8 +35,9 @@
err = -ENOENT;
if (home == NULL) {
- printk(UM_KERN_ERR "make_uml_dir : no value in "
- "environment for $HOME\n");
+ printk(UM_KERN_ERR
+ "%s: no value in environment for $HOME\n",
+ __func__);
goto err;
}
strlcpy(dir, home, sizeof(dir));
@@ -50,13 +51,15 @@
err = -ENOMEM;
uml_dir = malloc(strlen(dir) + 1);
if (uml_dir == NULL) {
- printf("make_uml_dir : malloc failed, errno = %d\n", errno);
+ printk(UM_KERN_ERR "%s : malloc failed, errno = %d\n",
+ __func__, errno);
goto err;
}
strcpy(uml_dir, dir);
if ((mkdir(uml_dir, 0777) < 0) && (errno != EEXIST)) {
- printf("Failed to mkdir '%s': %s\n", uml_dir, strerror(errno));
+ printk(UM_KERN_ERR "Failed to mkdir '%s': %s\n",
+ uml_dir, strerror(errno));
err = -errno;
goto err_free;
}
@@ -351,7 +354,7 @@
static int __init set_uml_dir(char *name, int *add)
{
if (*name == '\0') {
- printf("uml_dir can't be an empty string\n");
+ os_warn("uml_dir can't be an empty string\n");
return 0;
}
@@ -362,7 +365,7 @@
uml_dir = malloc(strlen(name) + 2);
if (uml_dir == NULL) {
- printf("Failed to malloc uml_dir - error = %d\n", errno);
+ os_warn("Failed to malloc uml_dir - error = %d\n", errno);
/*
* Return 0 here because do_initcalls doesn't look at
@@ -387,8 +390,8 @@
sprintf(dir, "%s%s", uml_dir, umid);
err = remove_files_and_dir(dir);
if (err)
- printf("remove_umid_dir - remove_files_and_dir failed with "
- "err = %d\n", err);
+ os_warn("%s - remove_files_and_dir failed with err = %d\n",
+ __func__, err);
}
__uml_exitcall(remove_umid_dir);
diff --git a/arch/um/os-Linux/util.c b/arch/um/os-Linux/util.c
index faee55e..8cc8b26 100644
--- a/arch/um/os-Linux/util.c
+++ b/arch/um/os-Linux/util.c
@@ -13,6 +13,7 @@
#include <wait.h>
#include <sys/mman.h>
#include <sys/utsname.h>
+#include <init.h>
#include <os.h>
void stack_protections(unsigned long address)
@@ -152,3 +153,36 @@
{
printf("%.*s", n, s);
}
+
+static int quiet_info;
+
+static int __init quiet_cmd_param(char *str, int *add)
+{
+ quiet_info = 1;
+ return 0;
+}
+
+__uml_setup("quiet", quiet_cmd_param,
+"quiet\n"
+" Turns off information messages during boot.\n\n");
+
+void os_info(const char *fmt, ...)
+{
+ va_list list;
+
+ if (quiet_info)
+ return;
+
+ va_start(list, fmt);
+ vfprintf(stderr, fmt, list);
+ va_end(list);
+}
+
+void os_warn(const char *fmt, ...)
+{
+ va_list list;
+
+ va_start(list, fmt);
+ vfprintf(stderr, fmt, list);
+ va_end(list);
+}
diff --git a/arch/unicore32/include/asm/Kbuild b/arch/unicore32/include/asm/Kbuild
index 7a53a55..fda7e21 100644
--- a/arch/unicore32/include/asm/Kbuild
+++ b/arch/unicore32/include/asm/Kbuild
@@ -1,66 +1,38 @@
-
generic-y += atomic.h
-generic-y += auxvec.h
-generic-y += bitsperlong.h
generic-y += bugs.h
generic-y += clkdev.h
generic-y += current.h
generic-y += device.h
generic-y += div64.h
generic-y += emergency-restart.h
-generic-y += errno.h
generic-y += exec.h
generic-y += extable.h
generic-y += fb.h
-generic-y += fcntl.h
generic-y += ftrace.h
generic-y += futex.h
generic-y += hardirq.h
generic-y += hw_irq.h
-generic-y += ioctl.h
-generic-y += ioctls.h
-generic-y += ipcbuf.h
generic-y += irq_regs.h
generic-y += irq_work.h
generic-y += kdebug.h
generic-y += kmap_types.h
+generic-y += kprobes.h
generic-y += local.h
generic-y += mcs_spinlock.h
generic-y += mm-arch-hooks.h
-generic-y += mman.h
generic-y += module.h
-generic-y += msgbuf.h
-generic-y += param.h
generic-y += parport.h
generic-y += percpu.h
-generic-y += poll.h
-generic-y += posix_types.h
generic-y += preempt.h
-generic-y += resource.h
generic-y += sections.h
generic-y += segment.h
-generic-y += sembuf.h
generic-y += serial.h
-generic-y += setup.h
-generic-y += shmbuf.h
-generic-y += shmparam.h
-generic-y += signal.h
generic-y += sizes.h
-generic-y += socket.h
-generic-y += sockios.h
-generic-y += stat.h
-generic-y += statfs.h
-generic-y += swab.h
generic-y += syscalls.h
-generic-y += termbits.h
-generic-y += termios.h
generic-y += topology.h
generic-y += trace_clock.h
-generic-y += types.h
-generic-y += ucontext.h
generic-y += unaligned.h
generic-y += user.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h
-generic-y += kprobes.h
diff --git a/arch/unicore32/include/uapi/asm/Kbuild b/arch/unicore32/include/uapi/asm/Kbuild
index 1c44d3b..759a714 100644
--- a/arch/unicore32/include/uapi/asm/Kbuild
+++ b/arch/unicore32/include/uapi/asm/Kbuild
@@ -1,5 +1,32 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
+generic-y += auxvec.h
+generic-y += bitsperlong.h
+generic-y += errno.h
+generic-y += fcntl.h
+generic-y += ioctl.h
+generic-y += ioctls.h
+generic-y += ipcbuf.h
generic-y += kvm_para.h
+generic-y += mman.h
+generic-y += msgbuf.h
+generic-y += param.h
+generic-y += poll.h
+generic-y += posix_types.h
+generic-y += resource.h
+generic-y += sembuf.h
+generic-y += setup.h
+generic-y += shmbuf.h
+generic-y += shmparam.h
generic-y += siginfo.h
+generic-y += signal.h
+generic-y += socket.h
+generic-y += sockios.h
+generic-y += stat.h
+generic-y += statfs.h
+generic-y += swab.h
+generic-y += termbits.h
+generic-y += termios.h
+generic-y += types.h
+generic-y += ucontext.h
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 94a1868..781521b 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -50,6 +50,7 @@
select ARCH_HAS_DEVMEM_IS_ALLOWED
select ARCH_HAS_ELF_RANDOMIZE
select ARCH_HAS_FAST_MULTIPLIER
+ select ARCH_HAS_FORTIFY_SOURCE
select ARCH_HAS_GCOV_PROFILE_ALL
select ARCH_HAS_KCOV if X86_64
select ARCH_HAS_MMIO_FLUSH
@@ -162,6 +163,7 @@
select HAVE_PCSPKR_PLATFORM
select HAVE_PERF_EVENTS
select HAVE_PERF_EVENTS_NMI
+ select HAVE_HARDLOCKUP_DETECTOR_PERF if HAVE_PERF_EVENTS_NMI
select HAVE_PERF_REGS
select HAVE_PERF_USER_STACK_DUMP
select HAVE_REGS_AND_STACK_ACCESS_API
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index fcb7604..cd20ca0 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -348,6 +348,7 @@
config PUNIT_ATOM_DEBUG
tristate "ATOM Punit debug driver"
+ depends on PCI
select DEBUG_FS
select IOSF_MBI
---help---
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index 0d810fb..d88a2fd 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -73,12 +73,13 @@
$(obj)/bzImage: asflags-y := $(SVGA_MODE)
quiet_cmd_image = BUILD $@
+silent_redirect_image = >/dev/null
cmd_image = $(obj)/tools/build $(obj)/setup.bin $(obj)/vmlinux.bin \
- $(obj)/zoffset.h $@
+ $(obj)/zoffset.h $@ $($(quiet)redirect_image)
$(obj)/bzImage: $(obj)/setup.bin $(obj)/vmlinux.bin $(obj)/tools/build FORCE
$(call if_changed,image)
- @echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
+ @$(kecho) 'Kernel: $@ is ready' ' (#'`cat .version`')'
OBJCOPYFLAGS_vmlinux.bin := -O binary -R .note -R .comment -S
$(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index 2c860ad..8a95827 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -34,6 +34,7 @@
KBUILD_CFLAGS += -mno-mmx -mno-sse
KBUILD_CFLAGS += $(call cc-option,-ffreestanding)
KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector)
+KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__
GCOV_PROFILE := n
diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
index 00241c8..a0838ab 100644
--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -411,3 +411,8 @@
debug_putstr("done.\nBooting the kernel.\n");
return output;
}
+
+void fortify_panic(const char *name)
+{
+ error("detected buffer overflow");
+}
diff --git a/arch/x86/boot/string.c b/arch/x86/boot/string.c
index 630e366..16f4912 100644
--- a/arch/x86/boot/string.c
+++ b/arch/x86/boot/string.c
@@ -16,6 +16,15 @@
#include "ctype.h"
#include "string.h"
+/*
+ * Undef these macros so that the functions that we provide
+ * here will have the correct names regardless of how string.h
+ * may have chosen to #define them.
+ */
+#undef memcpy
+#undef memset
+#undef memcmp
+
int memcmp(const void *s1, const void *s2, size_t len)
{
bool diff;
diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index 6cf79e1..0eb9f92 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -1,5 +1,4 @@
# CONFIG_64BIT is not set
-CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
@@ -125,7 +124,6 @@
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_NF_NAT=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_MANGLE=y
@@ -255,7 +253,6 @@
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_PRINTER=y
CONFIG_USB_STORAGE=y
-CONFIG_USB_LIBUSUAL=y
CONFIG_EDAC=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index de45f57..4a4b16e 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
@@ -124,7 +123,6 @@
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_NF_NAT=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_MANGLE=y
@@ -251,7 +249,6 @@
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_PRINTER=y
CONFIG_USB_STORAGE=y
-CONFIG_USB_LIBUSUAL=y
CONFIG_EDAC=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
diff --git a/arch/x86/crypto/sha1_ssse3_glue.c b/arch/x86/crypto/sha1_ssse3_glue.c
index fc61739..f960a04 100644
--- a/arch/x86/crypto/sha1_ssse3_glue.c
+++ b/arch/x86/crypto/sha1_ssse3_glue.c
@@ -201,7 +201,7 @@
static bool avx2_usable(void)
{
- if (avx_usable() && boot_cpu_has(X86_FEATURE_AVX2)
+ if (false && avx_usable() && boot_cpu_has(X86_FEATURE_AVX2)
&& boot_cpu_has(X86_FEATURE_BMI1)
&& boot_cpu_has(X86_FEATURE_BMI2))
return true;
diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index a9a8027..d271fb7 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -705,6 +705,7 @@
#ifdef CONFIG_HAVE_KVM
apicinterrupt3 POSTED_INTR_VECTOR kvm_posted_intr_ipi smp_kvm_posted_intr_ipi
apicinterrupt3 POSTED_INTR_WAKEUP_VECTOR kvm_posted_intr_wakeup_ipi smp_kvm_posted_intr_wakeup_ipi
+apicinterrupt3 POSTED_INTR_NESTED_VECTOR kvm_posted_intr_nested_ipi smp_kvm_posted_intr_nested_ipi
#endif
#ifdef CONFIG_X86_MCE_THRESHOLD
diff --git a/arch/x86/events/core.c b/arch/x86/events/core.c
index ff1ea2f..8e3db8f 100644
--- a/arch/x86/events/core.c
+++ b/arch/x86/events/core.c
@@ -191,8 +191,8 @@
static bool check_hw_exists(void)
{
- u64 val, val_fail, val_new= ~0;
- int i, reg, reg_fail, ret = 0;
+ u64 val, val_fail = -1, val_new= ~0;
+ int i, reg, reg_fail = -1, ret = 0;
int bios_fail = 0;
int reg_safe = -1;
diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c
index aa62437..98b0f07 100644
--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -1708,6 +1708,120 @@
},
};
+static __initconst const u64 glp_hw_cache_event_ids
+ [PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+ [C(L1D)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = 0x81d0, /* MEM_UOPS_RETIRED.ALL_LOADS */
+ [C(RESULT_MISS)] = 0x0,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = 0x82d0, /* MEM_UOPS_RETIRED.ALL_STORES */
+ [C(RESULT_MISS)] = 0x0,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = 0x0,
+ [C(RESULT_MISS)] = 0x0,
+ },
+ },
+ [C(L1I)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = 0x0380, /* ICACHE.ACCESSES */
+ [C(RESULT_MISS)] = 0x0280, /* ICACHE.MISSES */
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = -1,
+ [C(RESULT_MISS)] = -1,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = 0x0,
+ [C(RESULT_MISS)] = 0x0,
+ },
+ },
+ [C(LL)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = 0x1b7, /* OFFCORE_RESPONSE */
+ [C(RESULT_MISS)] = 0x1b7, /* OFFCORE_RESPONSE */
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = 0x1b7, /* OFFCORE_RESPONSE */
+ [C(RESULT_MISS)] = 0x1b7, /* OFFCORE_RESPONSE */
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = 0x0,
+ [C(RESULT_MISS)] = 0x0,
+ },
+ },
+ [C(DTLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = 0x81d0, /* MEM_UOPS_RETIRED.ALL_LOADS */
+ [C(RESULT_MISS)] = 0xe08, /* DTLB_LOAD_MISSES.WALK_COMPLETED */
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = 0x82d0, /* MEM_UOPS_RETIRED.ALL_STORES */
+ [C(RESULT_MISS)] = 0xe49, /* DTLB_STORE_MISSES.WALK_COMPLETED */
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = 0x0,
+ [C(RESULT_MISS)] = 0x0,
+ },
+ },
+ [C(ITLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = 0x00c0, /* INST_RETIRED.ANY_P */
+ [C(RESULT_MISS)] = 0x0481, /* ITLB.MISS */
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = -1,
+ [C(RESULT_MISS)] = -1,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = -1,
+ [C(RESULT_MISS)] = -1,
+ },
+ },
+ [C(BPU)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = 0x00c4, /* BR_INST_RETIRED.ALL_BRANCHES */
+ [C(RESULT_MISS)] = 0x00c5, /* BR_MISP_RETIRED.ALL_BRANCHES */
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = -1,
+ [C(RESULT_MISS)] = -1,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = -1,
+ [C(RESULT_MISS)] = -1,
+ },
+ },
+};
+
+static __initconst const u64 glp_hw_cache_extra_regs
+ [PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+ [C(LL)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = GLM_DEMAND_READ|
+ GLM_LLC_ACCESS,
+ [C(RESULT_MISS)] = GLM_DEMAND_READ|
+ GLM_LLC_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = GLM_DEMAND_WRITE|
+ GLM_LLC_ACCESS,
+ [C(RESULT_MISS)] = GLM_DEMAND_WRITE|
+ GLM_LLC_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = 0x0,
+ [C(RESULT_MISS)] = 0x0,
+ },
+ },
+};
+
#define KNL_OT_L2_HITE BIT_ULL(19) /* Other Tile L2 Hit */
#define KNL_OT_L2_HITF BIT_ULL(20) /* Other Tile L2 Hit */
#define KNL_MCDRAM_LOCAL BIT_ULL(21)
@@ -3016,6 +3130,9 @@
return 0;
}
+static struct event_constraint counter0_constraint =
+ INTEL_ALL_EVENT_CONSTRAINT(0, 0x1);
+
static struct event_constraint counter2_constraint =
EVENT_CONSTRAINT(0, 0x4, 0);
@@ -3037,6 +3154,21 @@
return c;
}
+static struct event_constraint *
+glp_get_event_constraints(struct cpu_hw_events *cpuc, int idx,
+ struct perf_event *event)
+{
+ struct event_constraint *c;
+
+ /* :ppp means to do reduced skid PEBS which is PMC0 only. */
+ if (event->attr.precise_ip == 3)
+ return &counter0_constraint;
+
+ c = intel_get_event_constraints(cpuc, idx, event);
+
+ return c;
+}
+
/*
* Broadwell:
*
@@ -3265,10 +3397,8 @@
static void intel_pmu_sched_task(struct perf_event_context *ctx,
bool sched_in)
{
- if (x86_pmu.pebs_active)
- intel_pmu_pebs_sched_task(ctx, sched_in);
- if (x86_pmu.lbr_nr)
- intel_pmu_lbr_sched_task(ctx, sched_in);
+ intel_pmu_pebs_sched_task(ctx, sched_in);
+ intel_pmu_lbr_sched_task(ctx, sched_in);
}
PMU_FORMAT_ATTR(offcore_rsp, "config1:0-63");
@@ -3838,6 +3968,32 @@
pr_cont("Goldmont events, ");
break;
+ case INTEL_FAM6_ATOM_GEMINI_LAKE:
+ memcpy(hw_cache_event_ids, glp_hw_cache_event_ids,
+ sizeof(hw_cache_event_ids));
+ memcpy(hw_cache_extra_regs, glp_hw_cache_extra_regs,
+ sizeof(hw_cache_extra_regs));
+
+ intel_pmu_lbr_init_skl();
+
+ x86_pmu.event_constraints = intel_slm_event_constraints;
+ x86_pmu.pebs_constraints = intel_glp_pebs_event_constraints;
+ x86_pmu.extra_regs = intel_glm_extra_regs;
+ /*
+ * It's recommended to use CPU_CLK_UNHALTED.CORE_P + NPEBS
+ * for precise cycles.
+ */
+ x86_pmu.pebs_aliases = NULL;
+ x86_pmu.pebs_prec_dist = true;
+ x86_pmu.lbr_pt_coexist = true;
+ x86_pmu.flags |= PMU_FL_HAS_RSP_1;
+ x86_pmu.get_event_constraints = glp_get_event_constraints;
+ x86_pmu.cpu_events = glm_events_attrs;
+ /* Goldmont Plus has 4-wide pipeline */
+ event_attr_td_total_slots_scale_glm.event_str = "4";
+ pr_cont("Goldmont plus events, ");
+ break;
+
case INTEL_FAM6_WESTMERE:
case INTEL_FAM6_WESTMERE_EP:
case INTEL_FAM6_WESTMERE_EX:
diff --git a/arch/x86/events/intel/cstate.c b/arch/x86/events/intel/cstate.c
index 238ae32..4cf100f 100644
--- a/arch/x86/events/intel/cstate.c
+++ b/arch/x86/events/intel/cstate.c
@@ -40,16 +40,16 @@
* Model specific counters:
* MSR_CORE_C1_RES: CORE C1 Residency Counter
* perf code: 0x00
- * Available model: SLM,AMT
+ * Available model: SLM,AMT,GLM
* Scope: Core (each processor core has a MSR)
* MSR_CORE_C3_RESIDENCY: CORE C3 Residency Counter
* perf code: 0x01
- * Available model: NHM,WSM,SNB,IVB,HSW,BDW,SKL
+ * Available model: NHM,WSM,SNB,IVB,HSW,BDW,SKL,GLM
* Scope: Core
* MSR_CORE_C6_RESIDENCY: CORE C6 Residency Counter
* perf code: 0x02
* Available model: SLM,AMT,NHM,WSM,SNB,IVB,HSW,BDW
- * SKL,KNL
+ * SKL,KNL,GLM
* Scope: Core
* MSR_CORE_C7_RESIDENCY: CORE C7 Residency Counter
* perf code: 0x03
@@ -57,16 +57,17 @@
* Scope: Core
* MSR_PKG_C2_RESIDENCY: Package C2 Residency Counter.
* perf code: 0x00
- * Available model: SNB,IVB,HSW,BDW,SKL,KNL
+ * Available model: SNB,IVB,HSW,BDW,SKL,KNL,GLM
* Scope: Package (physical package)
* MSR_PKG_C3_RESIDENCY: Package C3 Residency Counter.
* perf code: 0x01
* Available model: NHM,WSM,SNB,IVB,HSW,BDW,SKL,KNL
+ * GLM
* Scope: Package (physical package)
* MSR_PKG_C6_RESIDENCY: Package C6 Residency Counter.
* perf code: 0x02
* Available model: SLM,AMT,NHM,WSM,SNB,IVB,HSW,BDW
- * SKL,KNL
+ * SKL,KNL,GLM
* Scope: Package (physical package)
* MSR_PKG_C7_RESIDENCY: Package C7 Residency Counter.
* perf code: 0x03
@@ -82,7 +83,7 @@
* Scope: Package (physical package)
* MSR_PKG_C10_RESIDENCY: Package C10 Residency Counter.
* perf code: 0x06
- * Available model: HSW ULT only
+ * Available model: HSW ULT, GLM
* Scope: Package (physical package)
*
*/
@@ -504,6 +505,17 @@
};
+static const struct cstate_model glm_cstates __initconst = {
+ .core_events = BIT(PERF_CSTATE_CORE_C1_RES) |
+ BIT(PERF_CSTATE_CORE_C3_RES) |
+ BIT(PERF_CSTATE_CORE_C6_RES),
+
+ .pkg_events = BIT(PERF_CSTATE_PKG_C2_RES) |
+ BIT(PERF_CSTATE_PKG_C3_RES) |
+ BIT(PERF_CSTATE_PKG_C6_RES) |
+ BIT(PERF_CSTATE_PKG_C10_RES),
+};
+
#define X86_CSTATES_MODEL(model, states) \
{ X86_VENDOR_INTEL, 6, model, X86_FEATURE_ANY, (unsigned long) &(states) }
@@ -546,6 +558,8 @@
X86_CSTATES_MODEL(INTEL_FAM6_XEON_PHI_KNL, knl_cstates),
X86_CSTATES_MODEL(INTEL_FAM6_XEON_PHI_KNM, knl_cstates),
+
+ X86_CSTATES_MODEL(INTEL_FAM6_ATOM_GOLDMONT, glm_cstates),
{ },
};
MODULE_DEVICE_TABLE(x86cpu, intel_cstates_match);
diff --git a/arch/x86/events/intel/ds.c b/arch/x86/events/intel/ds.c
index c6d23ff..a322fed 100644
--- a/arch/x86/events/intel/ds.c
+++ b/arch/x86/events/intel/ds.c
@@ -606,12 +606,6 @@
x86_pmu.drain_pebs(®s);
}
-void intel_pmu_pebs_sched_task(struct perf_event_context *ctx, bool sched_in)
-{
- if (!sched_in)
- intel_pmu_drain_pebs_buffer();
-}
-
/*
* PEBS
*/
@@ -651,6 +645,12 @@
EVENT_CONSTRAINT_END
};
+struct event_constraint intel_glp_pebs_event_constraints[] = {
+ /* Allow all events as PEBS with no flags */
+ INTEL_ALL_EVENT_CONSTRAINT(0, 0xf),
+ EVENT_CONSTRAINT_END
+};
+
struct event_constraint intel_nehalem_pebs_event_constraints[] = {
INTEL_PLD_CONSTRAINT(0x100b, 0xf), /* MEM_INST_RETIRED.* */
INTEL_FLAGS_EVENT_CONSTRAINT(0x0f, 0xf), /* MEM_UNCORE_RETIRED.* */
@@ -816,6 +816,14 @@
return cpuc->n_pebs && (cpuc->n_pebs == cpuc->n_large_pebs);
}
+void intel_pmu_pebs_sched_task(struct perf_event_context *ctx, bool sched_in)
+{
+ struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+
+ if (!sched_in && pebs_needs_sched_cb(cpuc))
+ intel_pmu_drain_pebs_buffer();
+}
+
static inline void pebs_update_threshold(struct cpu_hw_events *cpuc)
{
struct debug_store *ds = cpuc->ds;
@@ -889,6 +897,8 @@
if (hwc->flags & PERF_X86_EVENT_AUTO_RELOAD) {
ds->pebs_event_reset[hwc->idx] =
(u64)(-hwc->sample_period) & x86_pmu.cntval_mask;
+ } else {
+ ds->pebs_event_reset[hwc->idx] = 0;
}
}
diff --git a/arch/x86/events/intel/lbr.c b/arch/x86/events/intel/lbr.c
index eb26165..955457a 100644
--- a/arch/x86/events/intel/lbr.c
+++ b/arch/x86/events/intel/lbr.c
@@ -380,8 +380,12 @@
void intel_pmu_lbr_sched_task(struct perf_event_context *ctx, bool sched_in)
{
+ struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
struct x86_perf_task_context *task_ctx;
+ if (!cpuc->lbr_users)
+ return;
+
/*
* If LBR callstack feature is enabled and the stack was saved when
* the task was scheduled out, restore the stack. Otherwise flush
diff --git a/arch/x86/events/intel/uncore_snbep.c b/arch/x86/events/intel/uncore_snbep.c
index dae2fed..4f91276 100644
--- a/arch/x86/events/intel/uncore_snbep.c
+++ b/arch/x86/events/intel/uncore_snbep.c
@@ -316,7 +316,7 @@
#define SKX_UPI_PCI_PMON_CTL0 0x350
#define SKX_UPI_PCI_PMON_CTR0 0x318
#define SKX_UPI_PCI_PMON_BOX_CTL 0x378
-#define SKX_PMON_CTL_UMASK_EXT 0xff
+#define SKX_UPI_CTL_UMASK_EXT 0xffefff
/* SKX M2M */
#define SKX_M2M_PCI_PMON_CTL0 0x228
@@ -328,7 +328,7 @@
DEFINE_UNCORE_FORMAT_ATTR(event_ext, event, "config:0-7,21");
DEFINE_UNCORE_FORMAT_ATTR(use_occ_ctr, use_occ_ctr, "config:7");
DEFINE_UNCORE_FORMAT_ATTR(umask, umask, "config:8-15");
-DEFINE_UNCORE_FORMAT_ATTR(umask_ext, umask, "config:8-15,32-39");
+DEFINE_UNCORE_FORMAT_ATTR(umask_ext, umask, "config:8-15,32-43,45-55");
DEFINE_UNCORE_FORMAT_ATTR(qor, qor, "config:16");
DEFINE_UNCORE_FORMAT_ATTR(edge, edge, "config:18");
DEFINE_UNCORE_FORMAT_ATTR(tid_en, tid_en, "config:19");
@@ -351,7 +351,6 @@
DEFINE_UNCORE_FORMAT_ATTR(filter_link, filter_link, "config1:5-8");
DEFINE_UNCORE_FORMAT_ATTR(filter_link2, filter_link, "config1:6-8");
DEFINE_UNCORE_FORMAT_ATTR(filter_link3, filter_link, "config1:12");
-DEFINE_UNCORE_FORMAT_ATTR(filter_link4, filter_link, "config1:9-12");
DEFINE_UNCORE_FORMAT_ATTR(filter_nid, filter_nid, "config1:10-17");
DEFINE_UNCORE_FORMAT_ATTR(filter_nid2, filter_nid, "config1:32-47");
DEFINE_UNCORE_FORMAT_ATTR(filter_state, filter_state, "config1:18-22");
@@ -3302,7 +3301,6 @@
&format_attr_inv.attr,
&format_attr_thresh8.attr,
&format_attr_filter_tid4.attr,
- &format_attr_filter_link4.attr,
&format_attr_filter_state5.attr,
&format_attr_filter_rem.attr,
&format_attr_filter_loc.attr,
@@ -3312,7 +3310,6 @@
&format_attr_filter_opc_0.attr,
&format_attr_filter_opc_1.attr,
&format_attr_filter_nc.attr,
- &format_attr_filter_c6.attr,
&format_attr_filter_isoc.attr,
NULL,
};
@@ -3333,8 +3330,11 @@
SNBEP_CBO_EVENT_EXTRA_REG(0x0534, 0xffff, 0x4),
SNBEP_CBO_EVENT_EXTRA_REG(0x0934, 0xffff, 0x4),
SNBEP_CBO_EVENT_EXTRA_REG(0x1134, 0xffff, 0x4),
- SNBEP_CBO_EVENT_EXTRA_REG(0x2134, 0xffff, 0x4),
- SNBEP_CBO_EVENT_EXTRA_REG(0x8134, 0xffff, 0x4),
+ SNBEP_CBO_EVENT_EXTRA_REG(0x3134, 0xffff, 0x4),
+ SNBEP_CBO_EVENT_EXTRA_REG(0x9134, 0xffff, 0x4),
+ SNBEP_CBO_EVENT_EXTRA_REG(0x35, 0xff, 0x8),
+ SNBEP_CBO_EVENT_EXTRA_REG(0x36, 0xff, 0x8),
+ EVENT_EXTRA_END
};
static u64 skx_cha_filter_mask(int fields)
@@ -3347,6 +3347,17 @@
mask |= SKX_CHA_MSR_PMON_BOX_FILTER_LINK;
if (fields & 0x4)
mask |= SKX_CHA_MSR_PMON_BOX_FILTER_STATE;
+ if (fields & 0x8) {
+ mask |= SKX_CHA_MSR_PMON_BOX_FILTER_REM;
+ mask |= SKX_CHA_MSR_PMON_BOX_FILTER_LOC;
+ mask |= SKX_CHA_MSR_PMON_BOX_FILTER_ALL_OPC;
+ mask |= SKX_CHA_MSR_PMON_BOX_FILTER_NM;
+ mask |= SKX_CHA_MSR_PMON_BOX_FILTER_NOT_NM;
+ mask |= SKX_CHA_MSR_PMON_BOX_FILTER_OPC0;
+ mask |= SKX_CHA_MSR_PMON_BOX_FILTER_OPC1;
+ mask |= SKX_CHA_MSR_PMON_BOX_FILTER_NC;
+ mask |= SKX_CHA_MSR_PMON_BOX_FILTER_ISOC;
+ }
return mask;
}
@@ -3492,6 +3503,26 @@
.format_group = &skx_uncore_format_group,
};
+static struct attribute *skx_uncore_pcu_formats_attr[] = {
+ &format_attr_event.attr,
+ &format_attr_umask.attr,
+ &format_attr_edge.attr,
+ &format_attr_inv.attr,
+ &format_attr_thresh8.attr,
+ &format_attr_occ_invert.attr,
+ &format_attr_occ_edge_det.attr,
+ &format_attr_filter_band0.attr,
+ &format_attr_filter_band1.attr,
+ &format_attr_filter_band2.attr,
+ &format_attr_filter_band3.attr,
+ NULL,
+};
+
+static struct attribute_group skx_uncore_pcu_format_group = {
+ .name = "format",
+ .attrs = skx_uncore_pcu_formats_attr,
+};
+
static struct intel_uncore_ops skx_uncore_pcu_ops = {
IVBEP_UNCORE_MSR_OPS_COMMON_INIT(),
.hw_config = hswep_pcu_hw_config,
@@ -3510,7 +3541,7 @@
.box_ctl = HSWEP_PCU_MSR_PMON_BOX_CTL,
.num_shared_regs = 1,
.ops = &skx_uncore_pcu_ops,
- .format_group = &snbep_uncore_pcu_format_group,
+ .format_group = &skx_uncore_pcu_format_group,
};
static struct intel_uncore_type *skx_msr_uncores[] = {
@@ -3603,8 +3634,8 @@
.perf_ctr_bits = 48,
.perf_ctr = SKX_UPI_PCI_PMON_CTR0,
.event_ctl = SKX_UPI_PCI_PMON_CTL0,
- .event_mask = SNBEP_QPI_PCI_PMON_RAW_EVENT_MASK,
- .event_mask_ext = SKX_PMON_CTL_UMASK_EXT,
+ .event_mask = SNBEP_PMON_RAW_EVENT_MASK,
+ .event_mask_ext = SKX_UPI_CTL_UMASK_EXT,
.box_ctl = SKX_UPI_PCI_PMON_BOX_CTL,
.ops = &skx_upi_uncore_pci_ops,
.format_group = &skx_upi_uncore_format_group,
diff --git a/arch/x86/events/perf_event.h b/arch/x86/events/perf_event.h
index 53728ee..476aec3 100644
--- a/arch/x86/events/perf_event.h
+++ b/arch/x86/events/perf_event.h
@@ -879,6 +879,8 @@
extern struct event_constraint intel_glm_pebs_event_constraints[];
+extern struct event_constraint intel_glp_pebs_event_constraints[];
+
extern struct event_constraint intel_nehalem_pebs_event_constraints[];
extern struct event_constraint intel_westmere_pebs_event_constraints[];
diff --git a/arch/x86/include/asm/bug.h b/arch/x86/include/asm/bug.h
index 39e702d..aa6b202 100644
--- a/arch/x86/include/asm/bug.h
+++ b/arch/x86/include/asm/bug.h
@@ -35,7 +35,7 @@
#define _BUG_FLAGS(ins, flags) \
do { \
asm volatile("1:\t" ins "\n" \
- ".pushsection __bug_table,\"a\"\n" \
+ ".pushsection __bug_table,\"aw\"\n" \
"2:\t" __BUG_REL(1b) "\t# bug_entry::bug_addr\n" \
"\t" __BUG_REL(%c0) "\t# bug_entry::file\n" \
"\t.word %c1" "\t# bug_entry::line\n" \
@@ -52,7 +52,7 @@
#define _BUG_FLAGS(ins, flags) \
do { \
asm volatile("1:\t" ins "\n" \
- ".pushsection __bug_table,\"a\"\n" \
+ ".pushsection __bug_table,\"aw\"\n" \
"2:\t" __BUG_REL(1b) "\t# bug_entry::bug_addr\n" \
"\t.word %c0" "\t# bug_entry::flags\n" \
"\t.org 2b+%c1\n" \
diff --git a/arch/x86/include/asm/cpufeatures.h b/arch/x86/include/asm/cpufeatures.h
index 2701e5f..ca3c48c 100644
--- a/arch/x86/include/asm/cpufeatures.h
+++ b/arch/x86/include/asm/cpufeatures.h
@@ -286,6 +286,7 @@
#define X86_FEATURE_PAUSEFILTER (15*32+10) /* filtered pause intercept */
#define X86_FEATURE_PFTHRESHOLD (15*32+12) /* pause filter threshold */
#define X86_FEATURE_AVIC (15*32+13) /* Virtual Interrupt Controller */
+#define X86_FEATURE_VIRTUAL_VMLOAD_VMSAVE (15*32+15) /* Virtual VMLOAD VMSAVE */
/* Intel-defined CPU features, CPUID level 0x00000007:0 (ecx), word 16 */
#define X86_FEATURE_AVX512VBMI (16*32+ 1) /* AVX512 Vector Bit Manipulation instructions*/
diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h
index d2ff779..796ff6c 100644
--- a/arch/x86/include/asm/efi.h
+++ b/arch/x86/include/asm/efi.h
@@ -33,7 +33,7 @@
#ifdef CONFIG_X86_32
-extern unsigned long asmlinkage efi_call_phys(void *, ...);
+extern asmlinkage unsigned long efi_call_phys(void *, ...);
#define arch_efi_call_virt_setup() kernel_fpu_begin()
#define arch_efi_call_virt_teardown() kernel_fpu_end()
@@ -52,7 +52,7 @@
#define EFI_LOADER_SIGNATURE "EL64"
-extern u64 asmlinkage efi_call(void *fp, ...);
+extern asmlinkage u64 efi_call(void *fp, ...);
#define efi_call_phys(f, args...) efi_call((f), args)
diff --git a/arch/x86/include/asm/entry_arch.h b/arch/x86/include/asm/entry_arch.h
index df00299..07b0695 100644
--- a/arch/x86/include/asm/entry_arch.h
+++ b/arch/x86/include/asm/entry_arch.h
@@ -25,6 +25,8 @@
smp_kvm_posted_intr_ipi)
BUILD_INTERRUPT3(kvm_posted_intr_wakeup_ipi, POSTED_INTR_WAKEUP_VECTOR,
smp_kvm_posted_intr_wakeup_ipi)
+BUILD_INTERRUPT3(kvm_posted_intr_nested_ipi, POSTED_INTR_NESTED_VECTOR,
+ smp_kvm_posted_intr_nested_ipi)
#endif
/*
diff --git a/arch/x86/include/asm/hardirq.h b/arch/x86/include/asm/hardirq.h
index 9b76cd3..ad1ed53 100644
--- a/arch/x86/include/asm/hardirq.h
+++ b/arch/x86/include/asm/hardirq.h
@@ -15,6 +15,7 @@
#ifdef CONFIG_HAVE_KVM
unsigned int kvm_posted_intr_ipis;
unsigned int kvm_posted_intr_wakeup_ipis;
+ unsigned int kvm_posted_intr_nested_ipis;
#endif
unsigned int x86_platform_ipis; /* arch dependent */
unsigned int apic_perf_irqs;
diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h
index b90e105..d6dbafb 100644
--- a/arch/x86/include/asm/hw_irq.h
+++ b/arch/x86/include/asm/hw_irq.h
@@ -30,6 +30,7 @@
extern asmlinkage void x86_platform_ipi(void);
extern asmlinkage void kvm_posted_intr_ipi(void);
extern asmlinkage void kvm_posted_intr_wakeup_ipi(void);
+extern asmlinkage void kvm_posted_intr_nested_ipi(void);
extern asmlinkage void error_interrupt(void);
extern asmlinkage void irq_work_interrupt(void);
@@ -62,6 +63,7 @@
#define trace_reboot_interrupt reboot_interrupt
#define trace_kvm_posted_intr_ipi kvm_posted_intr_ipi
#define trace_kvm_posted_intr_wakeup_ipi kvm_posted_intr_wakeup_ipi
+#define trace_kvm_posted_intr_nested_ipi kvm_posted_intr_nested_ipi
#endif /* CONFIG_TRACING */
#ifdef CONFIG_X86_LOCAL_APIC
diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h
index 7afb0e2..48febf0 100644
--- a/arch/x86/include/asm/io.h
+++ b/arch/x86/include/asm/io.h
@@ -328,13 +328,13 @@
static inline void outs##bwl(int port, const void *addr, unsigned long count) \
{ \
asm volatile("rep; outs" #bwl \
- : "+S"(addr), "+c"(count) : "d"(port)); \
+ : "+S"(addr), "+c"(count) : "d"(port) : "memory"); \
} \
\
static inline void ins##bwl(int port, void *addr, unsigned long count) \
{ \
asm volatile("rep; ins" #bwl \
- : "+D"(addr), "+c"(count) : "d"(port)); \
+ : "+D"(addr), "+c"(count) : "d"(port) : "memory"); \
}
BUILDIO(b, b, char)
diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h
index 6ca9fd6..aaf8d28 100644
--- a/arch/x86/include/asm/irq_vectors.h
+++ b/arch/x86/include/asm/irq_vectors.h
@@ -83,7 +83,6 @@
*/
#define X86_PLATFORM_IPI_VECTOR 0xf7
-#define POSTED_INTR_WAKEUP_VECTOR 0xf1
/*
* IRQ work vector:
*/
@@ -98,6 +97,8 @@
/* Vector for KVM to deliver posted interrupt IPI */
#ifdef CONFIG_HAVE_KVM
#define POSTED_INTR_VECTOR 0xf2
+#define POSTED_INTR_WAKEUP_VECTOR 0xf1
+#define POSTED_INTR_NESTED_VECTOR 0xf0
#endif
/*
diff --git a/arch/x86/include/asm/kprobes.h b/arch/x86/include/asm/kprobes.h
index 34b984c..6cf6543 100644
--- a/arch/x86/include/asm/kprobes.h
+++ b/arch/x86/include/asm/kprobes.h
@@ -52,10 +52,10 @@
#define flush_insn_slot(p) do { } while (0)
/* optinsn template addresses */
-extern __visible kprobe_opcode_t optprobe_template_entry;
-extern __visible kprobe_opcode_t optprobe_template_val;
-extern __visible kprobe_opcode_t optprobe_template_call;
-extern __visible kprobe_opcode_t optprobe_template_end;
+extern __visible kprobe_opcode_t optprobe_template_entry[];
+extern __visible kprobe_opcode_t optprobe_template_val[];
+extern __visible kprobe_opcode_t optprobe_template_call[];
+extern __visible kprobe_opcode_t optprobe_template_end[];
#define MAX_OPTIMIZED_LENGTH (MAX_INSN_SIZE + RELATIVE_ADDR_SIZE)
#define MAX_OPTINSN_SIZE \
(((unsigned long)&optprobe_template_end - \
diff --git a/arch/x86/include/asm/kvm_emulate.h b/arch/x86/include/asm/kvm_emulate.h
index 722d0e5..fde36f1 100644
--- a/arch/x86/include/asm/kvm_emulate.h
+++ b/arch/x86/include/asm/kvm_emulate.h
@@ -23,6 +23,7 @@
u16 error_code;
bool nested_page_fault;
u64 address; /* cr2 or nested page fault gpa */
+ u8 async_page_fault;
};
/*
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 1588e9e..87ac4fb 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -462,10 +462,12 @@
DECLARE_BITMAP(auto_eoi_bitmap, 256);
DECLARE_BITMAP(vec_bitmap, 256);
bool active;
+ bool dont_zero_synic_pages;
};
/* Hyper-V per vcpu emulation context */
struct kvm_vcpu_hv {
+ u32 vp_index;
u64 hv_vapic;
s64 runtime_offset;
struct kvm_vcpu_hv_synic synic;
@@ -549,6 +551,7 @@
bool reinject;
u8 nr;
u32 error_code;
+ u8 nested_apf;
} exception;
struct kvm_queued_interrupt {
@@ -649,6 +652,9 @@
u64 msr_val;
u32 id;
bool send_user_only;
+ u32 host_apf_reason;
+ unsigned long nested_apf_token;
+ bool delivery_as_pf_vmexit;
} apf;
/* OSVW MSRs (AMD only) */
@@ -803,6 +809,7 @@
int audit_point;
#endif
+ bool backwards_tsc_observed;
bool boot_vcpu_runs_old_kvmclock;
u32 bsp_vcpu_id;
@@ -952,9 +959,7 @@
unsigned char *hypercall_addr);
void (*set_irq)(struct kvm_vcpu *vcpu);
void (*set_nmi)(struct kvm_vcpu *vcpu);
- void (*queue_exception)(struct kvm_vcpu *vcpu, unsigned nr,
- bool has_error_code, u32 error_code,
- bool reinject);
+ void (*queue_exception)(struct kvm_vcpu *vcpu);
void (*cancel_injection)(struct kvm_vcpu *vcpu);
int (*interrupt_allowed)(struct kvm_vcpu *vcpu);
int (*nmi_allowed)(struct kvm_vcpu *vcpu);
diff --git a/arch/x86/include/asm/mmu_context.h b/arch/x86/include/asm/mmu_context.h
index ecfcb66..265c907 100644
--- a/arch/x86/include/asm/mmu_context.h
+++ b/arch/x86/include/asm/mmu_context.h
@@ -293,7 +293,7 @@
unsigned long cr3 = __pa(this_cpu_read(cpu_tlbstate.loaded_mm)->pgd);
/* For now, be very restrictive about when this can be called. */
- VM_WARN_ON(in_nmi() || !in_atomic());
+ VM_WARN_ON(in_nmi() || preemptible());
VM_BUG_ON(cr3 != __read_cr3());
return cr3;
diff --git a/arch/x86/include/asm/paravirt_types.h b/arch/x86/include/asm/paravirt_types.h
index cb976ba..9ffc36b 100644
--- a/arch/x86/include/asm/paravirt_types.h
+++ b/arch/x86/include/asm/paravirt_types.h
@@ -84,7 +84,7 @@
*/
unsigned (*patch)(u8 type, u16 clobber, void *insnbuf,
unsigned long addr, unsigned len);
-};
+} __no_randomize_layout;
struct pv_lazy_ops {
@@ -92,12 +92,12 @@
void (*enter)(void);
void (*leave)(void);
void (*flush)(void);
-};
+} __no_randomize_layout;
struct pv_time_ops {
unsigned long long (*sched_clock)(void);
unsigned long long (*steal_clock)(int cpu);
-};
+} __no_randomize_layout;
struct pv_cpu_ops {
/* hooks for various privileged instructions */
@@ -176,7 +176,7 @@
void (*start_context_switch)(struct task_struct *prev);
void (*end_context_switch)(struct task_struct *next);
-};
+} __no_randomize_layout;
struct pv_irq_ops {
/*
@@ -199,7 +199,7 @@
#ifdef CONFIG_X86_64
void (*adjust_exception_frame)(void);
#endif
-};
+} __no_randomize_layout;
struct pv_mmu_ops {
unsigned long (*read_cr2)(void);
@@ -305,7 +305,7 @@
an mfn. We can tell which is which from the index. */
void (*set_fixmap)(unsigned /* enum fixed_addresses */ idx,
phys_addr_t phys, pgprot_t flags);
-};
+} __no_randomize_layout;
struct arch_spinlock;
#ifdef CONFIG_SMP
@@ -322,7 +322,7 @@
void (*kick)(int cpu);
struct paravirt_callee_save vcpu_is_preempted;
-};
+} __no_randomize_layout;
/* This contains all the paravirt structures: we get a convenient
* number for each function using the offset which we use to indicate
@@ -334,7 +334,7 @@
struct pv_irq_ops pv_irq_ops;
struct pv_mmu_ops pv_mmu_ops;
struct pv_lock_ops pv_lock_ops;
-};
+} __no_randomize_layout;
extern struct pv_info pv_info;
extern struct pv_init_ops pv_init_ops;
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 6a79547..028245e 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -129,7 +129,7 @@
/* Index into per_cpu list: */
u16 cpu_index;
u32 microcode;
-};
+} __randomize_layout;
struct cpuid_regs {
u32 eax, ebx, ecx, edx;
diff --git a/arch/x86/include/asm/stackprotector.h b/arch/x86/include/asm/stackprotector.h
index dcbd9bc..8abedf1 100644
--- a/arch/x86/include/asm/stackprotector.h
+++ b/arch/x86/include/asm/stackprotector.h
@@ -74,6 +74,7 @@
get_random_bytes(&canary, sizeof(canary));
tsc = rdtsc();
canary += tsc + (tsc << 32UL);
+ canary &= CANARY_MASK;
current->stack_canary = canary;
#ifdef CONFIG_X86_64
diff --git a/arch/x86/include/asm/string_32.h b/arch/x86/include/asm/string_32.h
index 3d3e835..e9ee848 100644
--- a/arch/x86/include/asm/string_32.h
+++ b/arch/x86/include/asm/string_32.h
@@ -142,7 +142,9 @@
}
#define __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *, const void *, size_t);
+#ifndef CONFIG_FORTIFY_SOURCE
#ifdef CONFIG_X86_USE_3DNOW
#include <asm/mmx.h>
@@ -195,11 +197,15 @@
#endif
#endif
+#endif /* !CONFIG_FORTIFY_SOURCE */
#define __HAVE_ARCH_MEMMOVE
void *memmove(void *dest, const void *src, size_t n);
+extern int memcmp(const void *, const void *, size_t);
+#ifndef CONFIG_FORTIFY_SOURCE
#define memcmp __builtin_memcmp
+#endif
#define __HAVE_ARCH_MEMCHR
extern void *memchr(const void *cs, int c, size_t count);
@@ -321,6 +327,8 @@
: __memset_generic((s), (c), (count)))
#define __HAVE_ARCH_MEMSET
+extern void *memset(void *, int, size_t);
+#ifndef CONFIG_FORTIFY_SOURCE
#if (__GNUC__ >= 4)
#define memset(s, c, count) __builtin_memset(s, c, count)
#else
@@ -330,6 +338,7 @@
(count)) \
: __memset((s), (c), (count)))
#endif
+#endif /* !CONFIG_FORTIFY_SOURCE */
/*
* find the first occurrence of byte 'c', or 1 past the area if none
diff --git a/arch/x86/include/asm/string_64.h b/arch/x86/include/asm/string_64.h
index 1f22bc2..2a8c822 100644
--- a/arch/x86/include/asm/string_64.h
+++ b/arch/x86/include/asm/string_64.h
@@ -31,6 +31,7 @@
extern void *memcpy(void *to, const void *from, size_t len);
extern void *__memcpy(void *to, const void *from, size_t len);
+#ifndef CONFIG_FORTIFY_SOURCE
#ifndef CONFIG_KMEMCHECK
#if (__GNUC__ == 4 && __GNUC_MINOR__ < 3) || __GNUC__ < 4
#define memcpy(dst, src, len) \
@@ -51,6 +52,7 @@
*/
#define memcpy(dst, src, len) __inline_memcpy((dst), (src), (len))
#endif
+#endif /* !CONFIG_FORTIFY_SOURCE */
#define __HAVE_ARCH_MEMSET
void *memset(void *s, int c, size_t n);
@@ -77,6 +79,11 @@
#define memcpy(dst, src, len) __memcpy(dst, src, len)
#define memmove(dst, src, len) __memmove(dst, src, len)
#define memset(s, c, n) __memset(s, c, n)
+
+#ifndef __NO_FORTIFY
+#define __NO_FORTIFY /* FORTIFY_SOURCE uses __builtin_memcpy, etc. */
+#endif
+
#endif
#define __HAVE_ARCH_MEMCPY_MCSAFE 1
diff --git a/arch/x86/include/asm/svm.h b/arch/x86/include/asm/svm.h
index 14824fc..58fffe7 100644
--- a/arch/x86/include/asm/svm.h
+++ b/arch/x86/include/asm/svm.h
@@ -83,7 +83,7 @@
u32 event_inj;
u32 event_inj_err;
u64 nested_cr3;
- u64 lbr_ctl;
+ u64 virt_ext;
u32 clean;
u32 reserved_5;
u64 next_rip;
@@ -119,6 +119,9 @@
#define AVIC_ENABLE_SHIFT 31
#define AVIC_ENABLE_MASK (1 << AVIC_ENABLE_SHIFT)
+#define LBR_CTL_ENABLE_MASK BIT_ULL(0)
+#define VIRTUAL_VMLOAD_VMSAVE_ENABLE_MASK BIT_ULL(1)
+
#define SVM_INTERRUPT_SHADOW_MASK 1
#define SVM_IOIO_STR_SHIFT 2
diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index 476ea27..30269da 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -535,9 +535,6 @@
#define __put_user(x, ptr) \
__put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
-#define __get_user_unaligned __get_user
-#define __put_user_unaligned __put_user
-
/*
* {get|put}_user_try and catch
*
diff --git a/arch/x86/include/uapi/asm/kvm_para.h b/arch/x86/include/uapi/asm/kvm_para.h
index cff0bb6..a965e5b0 100644
--- a/arch/x86/include/uapi/asm/kvm_para.h
+++ b/arch/x86/include/uapi/asm/kvm_para.h
@@ -67,6 +67,7 @@
#define KVM_ASYNC_PF_ENABLED (1 << 0)
#define KVM_ASYNC_PF_SEND_ALWAYS (1 << 1)
+#define KVM_ASYNC_PF_DELIVERY_AS_PF_VMEXIT (1 << 2)
/* Operations for KVM_HC_MMU_OP */
#define KVM_MMU_OP_WRITE_PTE 1
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 6bb6806..7491e73 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -347,6 +347,14 @@
struct mpc_intsrc mp_irq;
/*
+ * Check bus_irq boundary.
+ */
+ if (bus_irq >= NR_IRQS_LEGACY) {
+ pr_warn("Invalid bus_irq %u for legacy override\n", bus_irq);
+ return;
+ }
+
+ /*
* Convert 'gsi' to 'ioapic.pin'.
*/
ioapic = mp_find_ioapic(gsi);
diff --git a/arch/x86/kernel/apic/hw_nmi.c b/arch/x86/kernel/apic/hw_nmi.c
index c73c9fb..d6f3877 100644
--- a/arch/x86/kernel/apic/hw_nmi.c
+++ b/arch/x86/kernel/apic/hw_nmi.c
@@ -19,7 +19,7 @@
#include <linux/init.h>
#include <linux/delay.h>
-#ifdef CONFIG_HARDLOCKUP_DETECTOR
+#ifdef CONFIG_HARDLOCKUP_DETECTOR_PERF
u64 hw_nmi_get_sample_period(int watchdog_thresh)
{
return (u64)(cpu_khz) * 1000 * watchdog_thresh;
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index b4f5f73..237e9c2 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -2093,7 +2093,7 @@
int idx;
idx = find_irq_entry(apic1, pin1, mp_INT);
if (idx != -1 && irq_trigger(idx))
- unmask_ioapic_irq(irq_get_chip_data(0));
+ unmask_ioapic_irq(irq_get_irq_data(0));
}
irq_domain_deactivate_irq(irq_data);
irq_domain_activate_irq(irq_data);
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index bb5abe8..3b9e220 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -134,6 +134,7 @@
n = K6_BUG_LOOP;
f_vide = vide;
+ OPTIMIZER_HIDE_VAR(f_vide);
d = rdtsc();
while (n--)
f_vide();
diff --git a/arch/x86/kernel/cpu/aperfmperf.c b/arch/x86/kernel/cpu/aperfmperf.c
index d869c86..7cf7c70 100644
--- a/arch/x86/kernel/cpu/aperfmperf.c
+++ b/arch/x86/kernel/cpu/aperfmperf.c
@@ -8,20 +8,25 @@
* This file is licensed under GPLv2.
*/
-#include <linux/jiffies.h>
+#include <linux/delay.h>
+#include <linux/ktime.h>
#include <linux/math64.h>
#include <linux/percpu.h>
#include <linux/smp.h>
struct aperfmperf_sample {
unsigned int khz;
- unsigned long jiffies;
+ ktime_t time;
u64 aperf;
u64 mperf;
};
static DEFINE_PER_CPU(struct aperfmperf_sample, samples);
+#define APERFMPERF_CACHE_THRESHOLD_MS 10
+#define APERFMPERF_REFRESH_DELAY_MS 20
+#define APERFMPERF_STALE_THRESHOLD_MS 1000
+
/*
* aperfmperf_snapshot_khz()
* On the current CPU, snapshot APERF, MPERF, and jiffies
@@ -33,9 +38,11 @@
u64 aperf, aperf_delta;
u64 mperf, mperf_delta;
struct aperfmperf_sample *s = this_cpu_ptr(&samples);
+ ktime_t now = ktime_get();
+ s64 time_delta = ktime_ms_delta(now, s->time);
- /* Don't bother re-computing within 10 ms */
- if (time_before(jiffies, s->jiffies + HZ/100))
+ /* Don't bother re-computing within the cache threshold time. */
+ if (time_delta < APERFMPERF_CACHE_THRESHOLD_MS)
return;
rdmsrl(MSR_IA32_APERF, aperf);
@@ -51,22 +58,21 @@
if (mperf_delta == 0)
return;
- /*
- * if (cpu_khz * aperf_delta) fits into ULLONG_MAX, then
- * khz = (cpu_khz * aperf_delta) / mperf_delta
- */
- if (div64_u64(ULLONG_MAX, cpu_khz) > aperf_delta)
- s->khz = div64_u64((cpu_khz * aperf_delta), mperf_delta);
- else /* khz = aperf_delta / (mperf_delta / cpu_khz) */
- s->khz = div64_u64(aperf_delta,
- div64_u64(mperf_delta, cpu_khz));
- s->jiffies = jiffies;
+ s->time = now;
s->aperf = aperf;
s->mperf = mperf;
+
+ /* If the previous iteration was too long ago, discard it. */
+ if (time_delta > APERFMPERF_STALE_THRESHOLD_MS)
+ s->khz = 0;
+ else
+ s->khz = div64_u64((cpu_khz * aperf_delta), mperf_delta);
}
unsigned int arch_freq_get_on_cpu(int cpu)
{
+ unsigned int khz;
+
if (!cpu_khz)
return 0;
@@ -74,6 +80,12 @@
return 0;
smp_call_function_single(cpu, aperfmperf_snapshot_khz, NULL, 1);
+ khz = per_cpu(samples.khz, cpu);
+ if (khz)
+ return khz;
+
+ msleep(APERFMPERF_REFRESH_DELAY_MS);
+ smp_call_function_single(cpu, aperfmperf_snapshot_khz, NULL, 1);
return per_cpu(samples.khz, cpu);
}
diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c
index 22217ec..44404e2 100644
--- a/arch/x86/kernel/crash.c
+++ b/arch/x86/kernel/crash.c
@@ -457,7 +457,7 @@
bufp += sizeof(Elf64_Phdr);
phdr->p_type = PT_NOTE;
phdr->p_offset = phdr->p_paddr = paddr_vmcoreinfo_note();
- phdr->p_filesz = phdr->p_memsz = sizeof(vmcoreinfo_note);
+ phdr->p_filesz = phdr->p_memsz = VMCOREINFO_NOTE_SIZE;
(ehdr->e_phnum)++;
#ifdef CONFIG_X86_64
diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c
index 3fe45f8..cbf1f6b 100644
--- a/arch/x86/kernel/devicetree.c
+++ b/arch/x86/kernel/devicetree.c
@@ -235,8 +235,7 @@
ret = of_address_to_resource(dn, 0, &r);
if (ret) {
- printk(KERN_ERR "Can't obtain address from node %s.\n",
- dn->full_name);
+ printk(KERN_ERR "Can't obtain address from device node %pOF.\n", dn);
return;
}
mp_register_ioapic(++ioapic_id, r.start, gsi_top, &cfg);
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 16f82a3..8ce4212 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -345,21 +345,10 @@
return 0;
}
-static int hpet_resume(struct clock_event_device *evt, int timer)
+static int hpet_resume(struct clock_event_device *evt)
{
- if (!timer) {
- hpet_enable_legacy_int();
- } else {
- struct hpet_dev *hdev = EVT_TO_HPET_DEV(evt);
-
- irq_domain_deactivate_irq(irq_get_irq_data(hdev->irq));
- irq_domain_activate_irq(irq_get_irq_data(hdev->irq));
- disable_hardirq(hdev->irq);
- irq_set_affinity(hdev->irq, cpumask_of(hdev->cpu));
- enable_irq(hdev->irq);
- }
+ hpet_enable_legacy_int();
hpet_print_config();
-
return 0;
}
@@ -417,7 +406,7 @@
static int hpet_legacy_resume(struct clock_event_device *evt)
{
- return hpet_resume(evt, 0);
+ return hpet_resume(evt);
}
static int hpet_legacy_next_event(unsigned long delta,
@@ -510,8 +499,14 @@
static int hpet_msi_resume(struct clock_event_device *evt)
{
struct hpet_dev *hdev = EVT_TO_HPET_DEV(evt);
+ struct irq_data *data = irq_get_irq_data(hdev->irq);
+ struct msi_msg msg;
- return hpet_resume(evt, hdev->num);
+ /* Restore the MSI msg and unmask the interrupt */
+ irq_chip_compose_msi_msg(data, &msg);
+ hpet_msi_write(hdev, &msg);
+ hpet_msi_unmask(data);
+ return 0;
}
static int hpet_msi_next_event(unsigned long delta,
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index 4aa03c5..4ed0aba 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -155,6 +155,12 @@
seq_printf(p, "%10u ", irq_stats(j)->kvm_posted_intr_ipis);
seq_puts(p, " Posted-interrupt notification event\n");
+ seq_printf(p, "%*s: ", prec, "NPI");
+ for_each_online_cpu(j)
+ seq_printf(p, "%10u ",
+ irq_stats(j)->kvm_posted_intr_nested_ipis);
+ seq_puts(p, " Nested posted-interrupt event\n");
+
seq_printf(p, "%*s: ", prec, "PIW");
for_each_online_cpu(j)
seq_printf(p, "%10u ",
@@ -313,6 +319,19 @@
exiting_irq();
set_irq_regs(old_regs);
}
+
+/*
+ * Handler for POSTED_INTERRUPT_NESTED_VECTOR.
+ */
+__visible void smp_kvm_posted_intr_nested_ipi(struct pt_regs *regs)
+{
+ struct pt_regs *old_regs = set_irq_regs(regs);
+
+ entering_ack_irq();
+ inc_irq_stat(kvm_posted_intr_nested_ipis);
+ exiting_irq();
+ set_irq_regs(old_regs);
+}
#endif
__visible void __irq_entry smp_trace_x86_platform_ipi(struct pt_regs *regs)
diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c
index 7468c69..c7fd185 100644
--- a/arch/x86/kernel/irqinit.c
+++ b/arch/x86/kernel/irqinit.c
@@ -150,6 +150,8 @@
alloc_intr_gate(POSTED_INTR_VECTOR, kvm_posted_intr_ipi);
/* IPI for KVM to deliver interrupt to wake up tasks */
alloc_intr_gate(POSTED_INTR_WAKEUP_VECTOR, kvm_posted_intr_wakeup_ipi);
+ /* IPI for KVM to deliver nested posted interrupt */
+ alloc_intr_gate(POSTED_INTR_NESTED_VECTOR, kvm_posted_intr_nested_ipi);
#endif
/* IPI vectors for APIC spurious and error interrupts */
diff --git a/arch/x86/kernel/kprobes/core.c b/arch/x86/kernel/kprobes/core.c
index 6b87780..f015371 100644
--- a/arch/x86/kernel/kprobes/core.c
+++ b/arch/x86/kernel/kprobes/core.c
@@ -457,6 +457,8 @@
int arch_prepare_kprobe(struct kprobe *p)
{
+ int ret;
+
if (alternatives_text_reserved(p->addr, p->addr))
return -EINVAL;
@@ -467,7 +469,13 @@
if (!p->ainsn.insn)
return -ENOMEM;
- return arch_copy_kprobe(p);
+ ret = arch_copy_kprobe(p);
+ if (ret) {
+ free_insn_slot(p->ainsn.insn, 0);
+ p->ainsn.insn = NULL;
+ }
+
+ return ret;
}
void arch_arm_kprobe(struct kprobe *p)
diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c
index 43e10d6..d04e30e 100644
--- a/arch/x86/kernel/kvm.c
+++ b/arch/x86/kernel/kvm.c
@@ -151,6 +151,8 @@
if (hlist_unhashed(&n.link))
break;
+ rcu_irq_exit();
+
if (!n.halted) {
local_irq_enable();
schedule();
@@ -159,11 +161,11 @@
/*
* We cannot reschedule. So halt.
*/
- rcu_irq_exit();
native_safe_halt();
local_irq_disable();
- rcu_irq_enter();
}
+
+ rcu_irq_enter();
}
if (!n.halted)
finish_swait(&n.wq, &wait);
@@ -330,7 +332,12 @@
#ifdef CONFIG_PREEMPT
pa |= KVM_ASYNC_PF_SEND_ALWAYS;
#endif
- wrmsrl(MSR_KVM_ASYNC_PF_EN, pa | KVM_ASYNC_PF_ENABLED);
+ pa |= KVM_ASYNC_PF_ENABLED;
+
+ /* Async page fault support for L1 hypervisor is optional */
+ if (wrmsr_safe(MSR_KVM_ASYNC_PF_EN,
+ (pa | KVM_ASYNC_PF_DELIVERY_AS_PF_VMEXIT) & 0xffffffff, pa >> 32) < 0)
+ wrmsrl(MSR_KVM_ASYNC_PF_EN, pa);
__this_cpu_write(apf_reason.enabled, 1);
printk(KERN_INFO"KVM setup async PF for cpu %d\n",
smp_processor_id());
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 67393fc..a56bf60 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -471,12 +471,12 @@
/*
* The DMI quirks table takes precedence. If no quirks entry
- * matches and the ACPI Hardware Reduced bit is set, force EFI
- * reboot.
+ * matches and the ACPI Hardware Reduced bit is set and EFI
+ * runtime services are enabled, force EFI reboot.
*/
rv = dmi_check_system(reboot_dmi_table);
- if (!rv && efi_reboot_required())
+ if (!rv && efi_reboot_required() && !efi_runtime_disabled())
reboot_type = BOOT_EFI;
return 0;
diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig
index 760433b..2688c7d 100644
--- a/arch/x86/kvm/Kconfig
+++ b/arch/x86/kvm/Kconfig
@@ -22,7 +22,7 @@
depends on HAVE_KVM
depends on HIGH_RES_TIMERS
# for TASKSTATS/TASK_DELAY_ACCT:
- depends on NET
+ depends on NET && MULTIUSER
select PREEMPT_NOTIFIERS
select MMU_NOTIFIER
select ANON_INODES
diff --git a/arch/x86/kvm/hyperv.c b/arch/x86/kvm/hyperv.c
index ebae57a..337b6d2 100644
--- a/arch/x86/kvm/hyperv.c
+++ b/arch/x86/kvm/hyperv.c
@@ -106,14 +106,27 @@
return 0;
}
-static struct kvm_vcpu_hv_synic *synic_get(struct kvm *kvm, u32 vcpu_id)
+static struct kvm_vcpu *get_vcpu_by_vpidx(struct kvm *kvm, u32 vpidx)
+{
+ struct kvm_vcpu *vcpu = NULL;
+ int i;
+
+ if (vpidx < KVM_MAX_VCPUS)
+ vcpu = kvm_get_vcpu(kvm, vpidx);
+ if (vcpu && vcpu_to_hv_vcpu(vcpu)->vp_index == vpidx)
+ return vcpu;
+ kvm_for_each_vcpu(i, vcpu, kvm)
+ if (vcpu_to_hv_vcpu(vcpu)->vp_index == vpidx)
+ return vcpu;
+ return NULL;
+}
+
+static struct kvm_vcpu_hv_synic *synic_get(struct kvm *kvm, u32 vpidx)
{
struct kvm_vcpu *vcpu;
struct kvm_vcpu_hv_synic *synic;
- if (vcpu_id >= atomic_read(&kvm->online_vcpus))
- return NULL;
- vcpu = kvm_get_vcpu(kvm, vcpu_id);
+ vcpu = get_vcpu_by_vpidx(kvm, vpidx);
if (!vcpu)
return NULL;
synic = vcpu_to_synic(vcpu);
@@ -221,7 +234,8 @@
synic->version = data;
break;
case HV_X64_MSR_SIEFP:
- if (data & HV_SYNIC_SIEFP_ENABLE)
+ if ((data & HV_SYNIC_SIEFP_ENABLE) && !host &&
+ !synic->dont_zero_synic_pages)
if (kvm_clear_guest(vcpu->kvm,
data & PAGE_MASK, PAGE_SIZE)) {
ret = 1;
@@ -232,7 +246,8 @@
synic_exit(synic, msr);
break;
case HV_X64_MSR_SIMP:
- if (data & HV_SYNIC_SIMP_ENABLE)
+ if ((data & HV_SYNIC_SIMP_ENABLE) && !host &&
+ !synic->dont_zero_synic_pages)
if (kvm_clear_guest(vcpu->kvm,
data & PAGE_MASK, PAGE_SIZE)) {
ret = 1;
@@ -318,11 +333,11 @@
return ret;
}
-int kvm_hv_synic_set_irq(struct kvm *kvm, u32 vcpu_id, u32 sint)
+int kvm_hv_synic_set_irq(struct kvm *kvm, u32 vpidx, u32 sint)
{
struct kvm_vcpu_hv_synic *synic;
- synic = synic_get(kvm, vcpu_id);
+ synic = synic_get(kvm, vpidx);
if (!synic)
return -EINVAL;
@@ -341,11 +356,11 @@
kvm_hv_notify_acked_sint(vcpu, i);
}
-static int kvm_hv_set_sint_gsi(struct kvm *kvm, u32 vcpu_id, u32 sint, int gsi)
+static int kvm_hv_set_sint_gsi(struct kvm *kvm, u32 vpidx, u32 sint, int gsi)
{
struct kvm_vcpu_hv_synic *synic;
- synic = synic_get(kvm, vcpu_id);
+ synic = synic_get(kvm, vpidx);
if (!synic)
return -EINVAL;
@@ -634,9 +649,10 @@
}
if ((stimer->config & HV_STIMER_ENABLE) &&
- stimer->count)
- stimer_start(stimer);
- else
+ stimer->count) {
+ if (!stimer->msg_pending)
+ stimer_start(stimer);
+ } else
stimer_cleanup(stimer);
}
}
@@ -687,14 +703,24 @@
stimer_init(&hv_vcpu->stimer[i], i);
}
-int kvm_hv_activate_synic(struct kvm_vcpu *vcpu)
+void kvm_hv_vcpu_postcreate(struct kvm_vcpu *vcpu)
{
+ struct kvm_vcpu_hv *hv_vcpu = vcpu_to_hv_vcpu(vcpu);
+
+ hv_vcpu->vp_index = kvm_vcpu_get_idx(vcpu);
+}
+
+int kvm_hv_activate_synic(struct kvm_vcpu *vcpu, bool dont_zero_synic_pages)
+{
+ struct kvm_vcpu_hv_synic *synic = vcpu_to_synic(vcpu);
+
/*
* Hyper-V SynIC auto EOI SINT's are
* not compatible with APICV, so deactivate APICV
*/
kvm_vcpu_deactivate_apicv(vcpu);
- vcpu_to_synic(vcpu)->active = true;
+ synic->active = true;
+ synic->dont_zero_synic_pages = dont_zero_synic_pages;
return 0;
}
@@ -978,6 +1004,11 @@
struct kvm_vcpu_hv *hv = &vcpu->arch.hyperv;
switch (msr) {
+ case HV_X64_MSR_VP_INDEX:
+ if (!host)
+ return 1;
+ hv->vp_index = (u32)data;
+ break;
case HV_X64_MSR_APIC_ASSIST_PAGE: {
u64 gfn;
unsigned long addr;
@@ -1089,18 +1120,9 @@
struct kvm_vcpu_hv *hv = &vcpu->arch.hyperv;
switch (msr) {
- case HV_X64_MSR_VP_INDEX: {
- int r;
- struct kvm_vcpu *v;
-
- kvm_for_each_vcpu(r, v, vcpu->kvm) {
- if (v == vcpu) {
- data = r;
- break;
- }
- }
+ case HV_X64_MSR_VP_INDEX:
+ data = hv->vp_index;
break;
- }
case HV_X64_MSR_EOI:
return kvm_hv_vapic_msr_read(vcpu, APIC_EOI, pdata);
case HV_X64_MSR_ICR:
diff --git a/arch/x86/kvm/hyperv.h b/arch/x86/kvm/hyperv.h
index cd11195..e637631 100644
--- a/arch/x86/kvm/hyperv.h
+++ b/arch/x86/kvm/hyperv.h
@@ -56,9 +56,10 @@
void kvm_hv_irq_routing_update(struct kvm *kvm);
int kvm_hv_synic_set_irq(struct kvm *kvm, u32 vcpu_id, u32 sint);
void kvm_hv_synic_send_eoi(struct kvm_vcpu *vcpu, int vector);
-int kvm_hv_activate_synic(struct kvm_vcpu *vcpu);
+int kvm_hv_activate_synic(struct kvm_vcpu *vcpu, bool dont_zero_synic_pages);
void kvm_hv_vcpu_init(struct kvm_vcpu *vcpu);
+void kvm_hv_vcpu_postcreate(struct kvm_vcpu *vcpu);
void kvm_hv_vcpu_uninit(struct kvm_vcpu *vcpu);
static inline struct kvm_vcpu_hv_stimer *vcpu_to_stimer(struct kvm_vcpu *vcpu,
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index a78b445..af19289 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -724,8 +724,10 @@
struct kvm_pit *pit = kvm->arch.vpit;
if (pit) {
+ mutex_lock(&kvm->slots_lock);
kvm_io_bus_unregister_dev(kvm, KVM_PIO_BUS, &pit->dev);
kvm_io_bus_unregister_dev(kvm, KVM_PIO_BUS, &pit->speaker_dev);
+ mutex_unlock(&kvm->slots_lock);
kvm_pit_set_reinject(pit, false);
hrtimer_cancel(&pit->pit_state.timer);
kthread_destroy_worker(pit->worker);
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 2819d4c1..589dcc1 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -1495,11 +1495,10 @@
static void cancel_hv_timer(struct kvm_lapic *apic)
{
+ WARN_ON(preemptible());
WARN_ON(!apic->lapic_timer.hv_timer_in_use);
- preempt_disable();
kvm_x86_ops->cancel_hv_timer(apic->vcpu);
apic->lapic_timer.hv_timer_in_use = false;
- preempt_enable();
}
static bool start_hv_timer(struct kvm_lapic *apic)
@@ -1507,6 +1506,7 @@
struct kvm_timer *ktimer = &apic->lapic_timer;
int r;
+ WARN_ON(preemptible());
if (!kvm_x86_ops->set_hv_timer)
return false;
@@ -1538,6 +1538,8 @@
static void start_sw_timer(struct kvm_lapic *apic)
{
struct kvm_timer *ktimer = &apic->lapic_timer;
+
+ WARN_ON(preemptible());
if (apic->lapic_timer.hv_timer_in_use)
cancel_hv_timer(apic);
if (!apic_lvtt_period(apic) && atomic_read(&ktimer->pending))
@@ -1552,15 +1554,20 @@
static void restart_apic_timer(struct kvm_lapic *apic)
{
+ preempt_disable();
if (!start_hv_timer(apic))
start_sw_timer(apic);
+ preempt_enable();
}
void kvm_lapic_expired_hv_timer(struct kvm_vcpu *vcpu)
{
struct kvm_lapic *apic = vcpu->arch.apic;
- WARN_ON(!apic->lapic_timer.hv_timer_in_use);
+ preempt_disable();
+ /* If the preempt notifier has already run, it also called apic_timer_expired */
+ if (!apic->lapic_timer.hv_timer_in_use)
+ goto out;
WARN_ON(swait_active(&vcpu->wq));
cancel_hv_timer(apic);
apic_timer_expired(apic);
@@ -1569,6 +1576,8 @@
advance_periodic_target_expiration(apic);
restart_apic_timer(apic);
}
+out:
+ preempt_enable();
}
EXPORT_SYMBOL_GPL(kvm_lapic_expired_hv_timer);
@@ -1582,9 +1591,11 @@
{
struct kvm_lapic *apic = vcpu->arch.apic;
+ preempt_disable();
/* Possibly the TSC deadline timer is not enabled yet */
if (apic->lapic_timer.hv_timer_in_use)
start_sw_timer(apic);
+ preempt_enable();
}
EXPORT_SYMBOL_GPL(kvm_lapic_switch_to_sw_timer);
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index aafd399..9b1dd11 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -46,6 +46,7 @@
#include <asm/io.h>
#include <asm/vmx.h>
#include <asm/kvm_page_track.h>
+#include "trace.h"
/*
* When setting this variable to true it enables Two-Dimensional-Paging
@@ -3748,7 +3749,7 @@
kvm_event_needs_reinjection(vcpu)))
return false;
- if (is_guest_mode(vcpu))
+ if (!vcpu->arch.apf.delivery_as_pf_vmexit && is_guest_mode(vcpu))
return false;
return kvm_x86_ops->interrupt_allowed(vcpu);
@@ -3780,6 +3781,38 @@
return false;
}
+int kvm_handle_page_fault(struct kvm_vcpu *vcpu, u64 error_code,
+ u64 fault_address, char *insn, int insn_len,
+ bool need_unprotect)
+{
+ int r = 1;
+
+ switch (vcpu->arch.apf.host_apf_reason) {
+ default:
+ trace_kvm_page_fault(fault_address, error_code);
+
+ if (need_unprotect && kvm_event_needs_reinjection(vcpu))
+ kvm_mmu_unprotect_page_virt(vcpu, fault_address);
+ r = kvm_mmu_page_fault(vcpu, fault_address, error_code, insn,
+ insn_len);
+ break;
+ case KVM_PV_REASON_PAGE_NOT_PRESENT:
+ vcpu->arch.apf.host_apf_reason = 0;
+ local_irq_disable();
+ kvm_async_pf_task_wait(fault_address);
+ local_irq_enable();
+ break;
+ case KVM_PV_REASON_PAGE_READY:
+ vcpu->arch.apf.host_apf_reason = 0;
+ local_irq_disable();
+ kvm_async_pf_task_wake(fault_address);
+ local_irq_enable();
+ break;
+ }
+ return r;
+}
+EXPORT_SYMBOL_GPL(kvm_handle_page_fault);
+
static bool
check_hugepage_cache_consistency(struct kvm_vcpu *vcpu, gfn_t gfn, int level)
{
diff --git a/arch/x86/kvm/mmu.h b/arch/x86/kvm/mmu.h
index a276834..d7d248a 100644
--- a/arch/x86/kvm/mmu.h
+++ b/arch/x86/kvm/mmu.h
@@ -77,6 +77,9 @@
void kvm_init_shadow_ept_mmu(struct kvm_vcpu *vcpu, bool execonly,
bool accessed_dirty);
bool kvm_can_do_async_pf(struct kvm_vcpu *vcpu);
+int kvm_handle_page_fault(struct kvm_vcpu *vcpu, u64 error_code,
+ u64 fault_address, char *insn, int insn_len,
+ bool need_unprotect);
static inline unsigned int kvm_mmu_available_pages(struct kvm *kvm)
{
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 905ea60..1107626 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -194,7 +194,6 @@
unsigned int3_injected;
unsigned long int3_rip;
- u32 apf_reason;
/* cached guest cpuid flags for faster access */
bool nrips_enabled : 1;
@@ -277,6 +276,10 @@
module_param(avic, int, S_IRUGO);
#endif
+/* enable/disable Virtual VMLOAD VMSAVE */
+static int vls = true;
+module_param(vls, int, 0444);
+
/* AVIC VM ID bit masks and lock */
static DECLARE_BITMAP(avic_vm_id_bitmap, AVIC_VM_ID_NR);
static DEFINE_SPINLOCK(avic_vm_id_lock);
@@ -633,11 +636,13 @@
svm_set_interrupt_shadow(vcpu, 0);
}
-static void svm_queue_exception(struct kvm_vcpu *vcpu, unsigned nr,
- bool has_error_code, u32 error_code,
- bool reinject)
+static void svm_queue_exception(struct kvm_vcpu *vcpu)
{
struct vcpu_svm *svm = to_svm(vcpu);
+ unsigned nr = vcpu->arch.exception.nr;
+ bool has_error_code = vcpu->arch.exception.has_error_code;
+ bool reinject = vcpu->arch.exception.reinject;
+ u32 error_code = vcpu->arch.exception.error_code;
/*
* If we are within a nested VM we'd better #VMEXIT and let the guest
@@ -947,7 +952,7 @@
{
u32 *msrpm = svm->msrpm;
- svm->vmcb->control.lbr_ctl = 1;
+ svm->vmcb->control.virt_ext |= LBR_CTL_ENABLE_MASK;
set_msr_interception(msrpm, MSR_IA32_LASTBRANCHFROMIP, 1, 1);
set_msr_interception(msrpm, MSR_IA32_LASTBRANCHTOIP, 1, 1);
set_msr_interception(msrpm, MSR_IA32_LASTINTFROMIP, 1, 1);
@@ -958,7 +963,7 @@
{
u32 *msrpm = svm->msrpm;
- svm->vmcb->control.lbr_ctl = 0;
+ svm->vmcb->control.virt_ext &= ~LBR_CTL_ENABLE_MASK;
set_msr_interception(msrpm, MSR_IA32_LASTBRANCHFROMIP, 0, 0);
set_msr_interception(msrpm, MSR_IA32_LASTBRANCHTOIP, 0, 0);
set_msr_interception(msrpm, MSR_IA32_LASTINTFROMIP, 0, 0);
@@ -1093,6 +1098,16 @@
}
}
+ if (vls) {
+ if (!npt_enabled ||
+ !boot_cpu_has(X86_FEATURE_VIRTUAL_VMLOAD_VMSAVE) ||
+ !IS_ENABLED(CONFIG_X86_64)) {
+ vls = false;
+ } else {
+ pr_info("Virtual VMLOAD VMSAVE supported\n");
+ }
+ }
+
return 0;
err:
@@ -1280,6 +1295,16 @@
if (avic)
avic_init_vmcb(svm);
+ /*
+ * If hardware supports Virtual VMLOAD VMSAVE then enable it
+ * in VMCB and clear intercepts to avoid #VMEXIT.
+ */
+ if (vls) {
+ clr_intercept(svm, INTERCEPT_VMLOAD);
+ clr_intercept(svm, INTERCEPT_VMSAVE);
+ svm->vmcb->control.virt_ext |= VIRTUAL_VMLOAD_VMSAVE_ENABLE_MASK;
+ }
+
mark_all_dirty(svm->vmcb);
enable_gif(svm);
@@ -2096,34 +2121,11 @@
static int pf_interception(struct vcpu_svm *svm)
{
u64 fault_address = svm->vmcb->control.exit_info_2;
- u64 error_code;
- int r = 1;
+ u64 error_code = svm->vmcb->control.exit_info_1;
- switch (svm->apf_reason) {
- default:
- error_code = svm->vmcb->control.exit_info_1;
-
- trace_kvm_page_fault(fault_address, error_code);
- if (!npt_enabled && kvm_event_needs_reinjection(&svm->vcpu))
- kvm_mmu_unprotect_page_virt(&svm->vcpu, fault_address);
- r = kvm_mmu_page_fault(&svm->vcpu, fault_address, error_code,
+ return kvm_handle_page_fault(&svm->vcpu, error_code, fault_address,
svm->vmcb->control.insn_bytes,
- svm->vmcb->control.insn_len);
- break;
- case KVM_PV_REASON_PAGE_NOT_PRESENT:
- svm->apf_reason = 0;
- local_irq_disable();
- kvm_async_pf_task_wait(fault_address);
- local_irq_enable();
- break;
- case KVM_PV_REASON_PAGE_READY:
- svm->apf_reason = 0;
- local_irq_disable();
- kvm_async_pf_task_wake(fault_address);
- local_irq_enable();
- break;
- }
- return r;
+ svm->vmcb->control.insn_len, !npt_enabled);
}
static int db_interception(struct vcpu_svm *svm)
@@ -2267,7 +2269,7 @@
{
struct kvm_vcpu *vcpu = &svm->vcpu;
u32 io_info = svm->vmcb->control.exit_info_1; /* address size bug? */
- int size, in, string;
+ int size, in, string, ret;
unsigned port;
++svm->vcpu.stat.io_exits;
@@ -2279,10 +2281,16 @@
port = io_info >> 16;
size = (io_info & SVM_IOIO_SIZE_MASK) >> SVM_IOIO_SIZE_SHIFT;
svm->next_rip = svm->vmcb->control.exit_info_2;
- skip_emulated_instruction(&svm->vcpu);
+ ret = kvm_skip_emulated_instruction(&svm->vcpu);
- return in ? kvm_fast_pio_in(vcpu, size, port)
- : kvm_fast_pio_out(vcpu, size, port);
+ /*
+ * TODO: we might be squashing a KVM_GUESTDBG_SINGLESTEP-triggered
+ * KVM_EXIT_DEBUG here.
+ */
+ if (in)
+ return kvm_fast_pio_in(vcpu, size, port) && ret;
+ else
+ return kvm_fast_pio_out(vcpu, size, port) && ret;
}
static int nmi_interception(struct vcpu_svm *svm)
@@ -2415,15 +2423,29 @@
if (!is_guest_mode(&svm->vcpu))
return 0;
+ vmexit = nested_svm_intercept(svm);
+ if (vmexit != NESTED_EXIT_DONE)
+ return 0;
+
svm->vmcb->control.exit_code = SVM_EXIT_EXCP_BASE + nr;
svm->vmcb->control.exit_code_hi = 0;
svm->vmcb->control.exit_info_1 = error_code;
- svm->vmcb->control.exit_info_2 = svm->vcpu.arch.cr2;
- vmexit = nested_svm_intercept(svm);
- if (vmexit == NESTED_EXIT_DONE)
- svm->nested.exit_required = true;
+ /*
+ * FIXME: we should not write CR2 when L1 intercepts an L2 #PF exception.
+ * The fix is to add the ancillary datum (CR2 or DR6) to structs
+ * kvm_queued_exception and kvm_vcpu_events, so that CR2 and DR6 can be
+ * written only when inject_pending_event runs (DR6 would written here
+ * too). This should be conditional on a new capability---if the
+ * capability is disabled, kvm_multiple_exception would write the
+ * ancillary information to CR2 or DR6, for backwards ABI-compatibility.
+ */
+ if (svm->vcpu.arch.exception.nested_apf)
+ svm->vmcb->control.exit_info_2 = svm->vcpu.arch.apf.nested_apf_token;
+ else
+ svm->vmcb->control.exit_info_2 = svm->vcpu.arch.cr2;
+ svm->nested.exit_required = true;
return vmexit;
}
@@ -2598,7 +2620,7 @@
break;
case SVM_EXIT_EXCP_BASE + PF_VECTOR:
/* When we're shadowing, trap PFs, but not async PF */
- if (!npt_enabled && svm->apf_reason == 0)
+ if (!npt_enabled && svm->vcpu.arch.apf.host_apf_reason == 0)
return NESTED_EXIT_HOST;
break;
default:
@@ -2645,7 +2667,7 @@
}
/* async page fault always cause vmexit */
else if ((exit_code == SVM_EXIT_EXCP_BASE + PF_VECTOR) &&
- svm->apf_reason != 0)
+ svm->vcpu.arch.exception.nested_apf != 0)
vmexit = NESTED_EXIT_DONE;
break;
}
@@ -2702,7 +2724,7 @@
dst->event_inj = from->event_inj;
dst->event_inj_err = from->event_inj_err;
dst->nested_cr3 = from->nested_cr3;
- dst->lbr_ctl = from->lbr_ctl;
+ dst->virt_ext = from->virt_ext;
}
static int nested_svm_vmexit(struct vcpu_svm *svm)
@@ -3008,7 +3030,7 @@
/* We don't want to see VMMCALLs from a nested guest */
clr_intercept(svm, INTERCEPT_VMMCALL);
- svm->vmcb->control.lbr_ctl = nested_vmcb->control.lbr_ctl;
+ svm->vmcb->control.virt_ext = nested_vmcb->control.virt_ext;
svm->vmcb->control.int_vector = nested_vmcb->control.int_vector;
svm->vmcb->control.int_state = nested_vmcb->control.int_state;
svm->vmcb->control.tsc_offset += nested_vmcb->control.tsc_offset;
@@ -3055,6 +3077,7 @@
{
struct vmcb *nested_vmcb;
struct page *page;
+ int ret;
if (nested_svm_check_permissions(svm))
return 1;
@@ -3064,18 +3087,19 @@
return 1;
svm->next_rip = kvm_rip_read(&svm->vcpu) + 3;
- skip_emulated_instruction(&svm->vcpu);
+ ret = kvm_skip_emulated_instruction(&svm->vcpu);
nested_svm_vmloadsave(nested_vmcb, svm->vmcb);
nested_svm_unmap(page);
- return 1;
+ return ret;
}
static int vmsave_interception(struct vcpu_svm *svm)
{
struct vmcb *nested_vmcb;
struct page *page;
+ int ret;
if (nested_svm_check_permissions(svm))
return 1;
@@ -3085,12 +3109,12 @@
return 1;
svm->next_rip = kvm_rip_read(&svm->vcpu) + 3;
- skip_emulated_instruction(&svm->vcpu);
+ ret = kvm_skip_emulated_instruction(&svm->vcpu);
nested_svm_vmloadsave(svm->vmcb, nested_vmcb);
nested_svm_unmap(page);
- return 1;
+ return ret;
}
static int vmrun_interception(struct vcpu_svm *svm)
@@ -3123,25 +3147,29 @@
static int stgi_interception(struct vcpu_svm *svm)
{
+ int ret;
+
if (nested_svm_check_permissions(svm))
return 1;
svm->next_rip = kvm_rip_read(&svm->vcpu) + 3;
- skip_emulated_instruction(&svm->vcpu);
+ ret = kvm_skip_emulated_instruction(&svm->vcpu);
kvm_make_request(KVM_REQ_EVENT, &svm->vcpu);
enable_gif(svm);
- return 1;
+ return ret;
}
static int clgi_interception(struct vcpu_svm *svm)
{
+ int ret;
+
if (nested_svm_check_permissions(svm))
return 1;
svm->next_rip = kvm_rip_read(&svm->vcpu) + 3;
- skip_emulated_instruction(&svm->vcpu);
+ ret = kvm_skip_emulated_instruction(&svm->vcpu);
disable_gif(svm);
@@ -3152,7 +3180,7 @@
mark_dirty(svm->vmcb, VMCB_INTR);
}
- return 1;
+ return ret;
}
static int invlpga_interception(struct vcpu_svm *svm)
@@ -3166,8 +3194,7 @@
kvm_mmu_invlpg(vcpu, kvm_register_read(&svm->vcpu, VCPU_REGS_RAX));
svm->next_rip = kvm_rip_read(&svm->vcpu) + 3;
- skip_emulated_instruction(&svm->vcpu);
- return 1;
+ return kvm_skip_emulated_instruction(&svm->vcpu);
}
static int skinit_interception(struct vcpu_svm *svm)
@@ -3190,7 +3217,7 @@
if (kvm_set_xcr(&svm->vcpu, index, new_bv) == 0) {
svm->next_rip = kvm_rip_read(&svm->vcpu) + 3;
- skip_emulated_instruction(&svm->vcpu);
+ return kvm_skip_emulated_instruction(&svm->vcpu);
}
return 1;
@@ -3286,8 +3313,7 @@
return emulate_instruction(&svm->vcpu, 0) == EMULATE_DONE;
kvm_mmu_invlpg(&svm->vcpu, svm->vmcb->control.exit_info_1);
- skip_emulated_instruction(&svm->vcpu);
- return 1;
+ return kvm_skip_emulated_instruction(&svm->vcpu);
}
static int emulate_on_interception(struct vcpu_svm *svm)
@@ -3437,9 +3463,7 @@
kvm_register_write(&svm->vcpu, reg, val);
}
- skip_emulated_instruction(&svm->vcpu);
-
- return 1;
+ return kvm_skip_emulated_instruction(&svm->vcpu);
}
static int cr8_write_interception(struct vcpu_svm *svm)
@@ -3562,6 +3586,7 @@
if (svm_get_msr(&svm->vcpu, &msr_info)) {
trace_kvm_msr_read_ex(ecx);
kvm_inject_gp(&svm->vcpu, 0);
+ return 1;
} else {
trace_kvm_msr_read(ecx, msr_info.data);
@@ -3570,9 +3595,8 @@
kvm_register_write(&svm->vcpu, VCPU_REGS_RDX,
msr_info.data >> 32);
svm->next_rip = kvm_rip_read(&svm->vcpu) + 2;
- skip_emulated_instruction(&svm->vcpu);
+ return kvm_skip_emulated_instruction(&svm->vcpu);
}
- return 1;
}
static int svm_set_vm_cr(struct kvm_vcpu *vcpu, u64 data)
@@ -3698,11 +3722,11 @@
if (kvm_set_msr(&svm->vcpu, &msr)) {
trace_kvm_msr_write_ex(ecx, data);
kvm_inject_gp(&svm->vcpu, 0);
+ return 1;
} else {
trace_kvm_msr_write(ecx, data);
- skip_emulated_instruction(&svm->vcpu);
+ return kvm_skip_emulated_instruction(&svm->vcpu);
}
- return 1;
}
static int msr_interception(struct vcpu_svm *svm)
@@ -3731,8 +3755,7 @@
static int nop_interception(struct vcpu_svm *svm)
{
- skip_emulated_instruction(&(svm->vcpu));
- return 1;
+ return kvm_skip_emulated_instruction(&(svm->vcpu));
}
static int monitor_interception(struct vcpu_svm *svm)
@@ -4117,7 +4140,7 @@
pr_err("%-20s%016llx\n", "avic_vapic_bar:", control->avic_vapic_bar);
pr_err("%-20s%08x\n", "event_inj:", control->event_inj);
pr_err("%-20s%08x\n", "event_inj_err:", control->event_inj_err);
- pr_err("%-20s%lld\n", "lbr_ctl:", control->lbr_ctl);
+ pr_err("%-20s%lld\n", "virt_ext:", control->virt_ext);
pr_err("%-20s%016llx\n", "next_rip:", control->next_rip);
pr_err("%-20s%016llx\n", "avic_backing_page:", control->avic_backing_page);
pr_err("%-20s%016llx\n", "avic_logical_id:", control->avic_logical_id);
@@ -4965,7 +4988,7 @@
/* if exit due to PF check for async PF */
if (svm->vmcb->control.exit_code == SVM_EXIT_EXCP_BASE + PF_VECTOR)
- svm->apf_reason = kvm_read_and_reset_pf_reason();
+ svm->vcpu.arch.apf.host_apf_reason = kvm_read_and_reset_pf_reason();
if (npt_enabled) {
vcpu->arch.regs_avail &= ~(1 << VCPU_EXREG_PDPTR);
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index f76efad..9b21b12 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -198,7 +198,8 @@
struct vmcs *vmcs;
struct vmcs *shadow_vmcs;
int cpu;
- int launched;
+ bool launched;
+ bool nmi_known_unmasked;
struct list_head loaded_vmcss_on_cpu_link;
};
@@ -415,13 +416,10 @@
/* The guest-physical address of the current VMCS L1 keeps for L2 */
gpa_t current_vmptr;
- /* The host-usable pointer to the above */
- struct page *current_vmcs12_page;
- struct vmcs12 *current_vmcs12;
/*
* Cache of the guest's VMCS, existing outside of guest memory.
* Loaded from guest memory during VMPTRLD. Flushed to guest
- * memory during VMXOFF, VMCLEAR, VMPTRLD.
+ * memory during VMCLEAR and VMPTRLD.
*/
struct vmcs12 *cached_vmcs12;
/*
@@ -562,7 +560,6 @@
struct kvm_vcpu vcpu;
unsigned long host_rsp;
u8 fail;
- bool nmi_known_unmasked;
u32 exit_intr_info;
u32 idt_vectoring_info;
ulong rflags;
@@ -927,6 +924,10 @@
static void copy_vmcs12_to_shadow(struct vcpu_vmx *vmx);
static void copy_shadow_to_vmcs12(struct vcpu_vmx *vmx);
static int alloc_identity_pagetable(struct kvm *kvm);
+static bool vmx_get_nmi_mask(struct kvm_vcpu *vcpu);
+static void vmx_set_nmi_mask(struct kvm_vcpu *vcpu, bool masked);
+static bool nested_vmx_is_page_fault_vmexit(struct vmcs12 *vmcs12,
+ u16 error_code);
static DEFINE_PER_CPU(struct vmcs *, vmxarea);
static DEFINE_PER_CPU(struct vmcs *, current_vmcs);
@@ -2326,6 +2327,11 @@
__vmx_load_host_state(to_vmx(vcpu));
}
+static bool emulation_required(struct kvm_vcpu *vcpu)
+{
+ return emulate_invalid_guest_state && !guest_state_valid(vcpu);
+}
+
static void vmx_decache_cr0_guest_bits(struct kvm_vcpu *vcpu);
/*
@@ -2363,6 +2369,8 @@
static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
{
+ unsigned long old_rflags = vmx_get_rflags(vcpu);
+
__set_bit(VCPU_EXREG_RFLAGS, (ulong *)&vcpu->arch.regs_avail);
to_vmx(vcpu)->rflags = rflags;
if (to_vmx(vcpu)->rmode.vm86_active) {
@@ -2370,6 +2378,9 @@
rflags |= X86_EFLAGS_IOPL | X86_EFLAGS_VM;
}
vmcs_writel(GUEST_RFLAGS, rflags);
+
+ if ((old_rflags ^ to_vmx(vcpu)->rflags) & X86_EFLAGS_VM)
+ to_vmx(vcpu)->emulation_required = emulation_required(vcpu);
}
static u32 vmx_get_pkru(struct kvm_vcpu *vcpu)
@@ -2418,32 +2429,84 @@
vmx_set_interrupt_shadow(vcpu, 0);
}
+static void nested_vmx_inject_exception_vmexit(struct kvm_vcpu *vcpu,
+ unsigned long exit_qual)
+{
+ struct vmcs12 *vmcs12 = get_vmcs12(vcpu);
+ unsigned int nr = vcpu->arch.exception.nr;
+ u32 intr_info = nr | INTR_INFO_VALID_MASK;
+
+ if (vcpu->arch.exception.has_error_code) {
+ vmcs12->vm_exit_intr_error_code = vcpu->arch.exception.error_code;
+ intr_info |= INTR_INFO_DELIVER_CODE_MASK;
+ }
+
+ if (kvm_exception_is_soft(nr))
+ intr_info |= INTR_TYPE_SOFT_EXCEPTION;
+ else
+ intr_info |= INTR_TYPE_HARD_EXCEPTION;
+
+ if (!(vmcs12->idt_vectoring_info_field & VECTORING_INFO_VALID_MASK) &&
+ vmx_get_nmi_mask(vcpu))
+ intr_info |= INTR_INFO_UNBLOCK_NMI;
+
+ nested_vmx_vmexit(vcpu, EXIT_REASON_EXCEPTION_NMI, intr_info, exit_qual);
+}
+
/*
* KVM wants to inject page-faults which it got to the guest. This function
* checks whether in a nested guest, we need to inject them to L1 or L2.
*/
-static int nested_vmx_check_exception(struct kvm_vcpu *vcpu, unsigned nr)
+static int nested_vmx_check_exception(struct kvm_vcpu *vcpu)
{
struct vmcs12 *vmcs12 = get_vmcs12(vcpu);
+ unsigned int nr = vcpu->arch.exception.nr;
- if (!(vmcs12->exception_bitmap & (1u << nr)))
- return 0;
+ if (nr == PF_VECTOR) {
+ if (vcpu->arch.exception.nested_apf) {
+ nested_vmx_inject_exception_vmexit(vcpu,
+ vcpu->arch.apf.nested_apf_token);
+ return 1;
+ }
+ /*
+ * FIXME: we must not write CR2 when L1 intercepts an L2 #PF exception.
+ * The fix is to add the ancillary datum (CR2 or DR6) to structs
+ * kvm_queued_exception and kvm_vcpu_events, so that CR2 and DR6
+ * can be written only when inject_pending_event runs. This should be
+ * conditional on a new capability---if the capability is disabled,
+ * kvm_multiple_exception would write the ancillary information to
+ * CR2 or DR6, for backwards ABI-compatibility.
+ */
+ if (nested_vmx_is_page_fault_vmexit(vmcs12,
+ vcpu->arch.exception.error_code)) {
+ nested_vmx_inject_exception_vmexit(vcpu, vcpu->arch.cr2);
+ return 1;
+ }
+ } else {
+ unsigned long exit_qual = 0;
+ if (nr == DB_VECTOR)
+ exit_qual = vcpu->arch.dr6;
- nested_vmx_vmexit(vcpu, EXIT_REASON_EXCEPTION_NMI,
- vmcs_read32(VM_EXIT_INTR_INFO),
- vmcs_readl(EXIT_QUALIFICATION));
- return 1;
+ if (vmcs12->exception_bitmap & (1u << nr)) {
+ nested_vmx_inject_exception_vmexit(vcpu, exit_qual);
+ return 1;
+ }
+ }
+
+ return 0;
}
-static void vmx_queue_exception(struct kvm_vcpu *vcpu, unsigned nr,
- bool has_error_code, u32 error_code,
- bool reinject)
+static void vmx_queue_exception(struct kvm_vcpu *vcpu)
{
struct vcpu_vmx *vmx = to_vmx(vcpu);
+ unsigned nr = vcpu->arch.exception.nr;
+ bool has_error_code = vcpu->arch.exception.has_error_code;
+ bool reinject = vcpu->arch.exception.reinject;
+ u32 error_code = vcpu->arch.exception.error_code;
u32 intr_info = nr | INTR_INFO_VALID_MASK;
if (!reinject && is_guest_mode(vcpu) &&
- nested_vmx_check_exception(vcpu, nr))
+ nested_vmx_check_exception(vcpu))
return;
if (has_error_code) {
@@ -2644,7 +2707,7 @@
* reason is that if one of these bits is necessary, it will appear
* in vmcs01 and prepare_vmcs02, when it bitwise-or's the control
* fields of vmcs01 and vmcs02, will turn these bits off - and
- * nested_vmx_exit_handled() will not pass related exits to L1.
+ * nested_vmx_exit_reflected() will not pass related exits to L1.
* These rules have exceptions below.
*/
@@ -3764,6 +3827,25 @@
}
}
+enum vmcs_field_type {
+ VMCS_FIELD_TYPE_U16 = 0,
+ VMCS_FIELD_TYPE_U64 = 1,
+ VMCS_FIELD_TYPE_U32 = 2,
+ VMCS_FIELD_TYPE_NATURAL_WIDTH = 3
+};
+
+static inline int vmcs_field_type(unsigned long field)
+{
+ if (0x1 & field) /* the *_HIGH fields are all 32 bit */
+ return VMCS_FIELD_TYPE_U32;
+ return (field >> 13) & 0x3 ;
+}
+
+static inline int vmcs_field_readonly(unsigned long field)
+{
+ return (((field >> 10) & 0x3) == 1);
+}
+
static void init_vmcs_shadow_fields(void)
{
int i, j;
@@ -3789,14 +3871,22 @@
/* shadowed fields guest access without vmexit */
for (i = 0; i < max_shadow_read_write_fields; i++) {
- clear_bit(shadow_read_write_fields[i],
- vmx_vmwrite_bitmap);
- clear_bit(shadow_read_write_fields[i],
- vmx_vmread_bitmap);
+ unsigned long field = shadow_read_write_fields[i];
+
+ clear_bit(field, vmx_vmwrite_bitmap);
+ clear_bit(field, vmx_vmread_bitmap);
+ if (vmcs_field_type(field) == VMCS_FIELD_TYPE_U64) {
+ clear_bit(field + 1, vmx_vmwrite_bitmap);
+ clear_bit(field + 1, vmx_vmread_bitmap);
+ }
}
- for (i = 0; i < max_shadow_read_only_fields; i++)
- clear_bit(shadow_read_only_fields[i],
- vmx_vmread_bitmap);
+ for (i = 0; i < max_shadow_read_only_fields; i++) {
+ unsigned long field = shadow_read_only_fields[i];
+
+ clear_bit(field, vmx_vmread_bitmap);
+ if (vmcs_field_type(field) == VMCS_FIELD_TYPE_U64)
+ clear_bit(field + 1, vmx_vmread_bitmap);
+ }
}
static __init int alloc_kvm_area(void)
@@ -3817,11 +3907,6 @@
return 0;
}
-static bool emulation_required(struct kvm_vcpu *vcpu)
-{
- return emulate_invalid_guest_state && !guest_state_valid(vcpu);
-}
-
static void fix_pmode_seg(struct kvm_vcpu *vcpu, int seg,
struct kvm_segment *save)
{
@@ -4634,6 +4719,11 @@
return true;
}
+static bool page_address_valid(struct kvm_vcpu *vcpu, gpa_t gpa)
+{
+ return PAGE_ALIGNED(gpa) && !(gpa >> cpuid_maxphyaddr(vcpu));
+}
+
static int init_rmode_tss(struct kvm *kvm)
{
gfn_t fn;
@@ -4905,6 +4995,28 @@
return enable_apicv;
}
+static void nested_mark_vmcs12_pages_dirty(struct kvm_vcpu *vcpu)
+{
+ struct vmcs12 *vmcs12 = get_vmcs12(vcpu);
+ gfn_t gfn;
+
+ /*
+ * Don't need to mark the APIC access page dirty; it is never
+ * written to by the CPU during APIC virtualization.
+ */
+
+ if (nested_cpu_has(vmcs12, CPU_BASED_TPR_SHADOW)) {
+ gfn = vmcs12->virtual_apic_page_addr >> PAGE_SHIFT;
+ kvm_vcpu_mark_page_dirty(vcpu, gfn);
+ }
+
+ if (nested_cpu_has_posted_intr(vmcs12)) {
+ gfn = vmcs12->posted_intr_desc_addr >> PAGE_SHIFT;
+ kvm_vcpu_mark_page_dirty(vcpu, gfn);
+ }
+}
+
+
static void vmx_complete_nested_posted_interrupt(struct kvm_vcpu *vcpu)
{
struct vcpu_vmx *vmx = to_vmx(vcpu);
@@ -4912,18 +5024,15 @@
void *vapic_page;
u16 status;
- if (vmx->nested.pi_desc &&
- vmx->nested.pi_pending) {
- vmx->nested.pi_pending = false;
- if (!pi_test_and_clear_on(vmx->nested.pi_desc))
- return;
+ if (!vmx->nested.pi_desc || !vmx->nested.pi_pending)
+ return;
- max_irr = find_last_bit(
- (unsigned long *)vmx->nested.pi_desc->pir, 256);
+ vmx->nested.pi_pending = false;
+ if (!pi_test_and_clear_on(vmx->nested.pi_desc))
+ return;
- if (max_irr == 256)
- return;
-
+ max_irr = find_last_bit((unsigned long *)vmx->nested.pi_desc->pir, 256);
+ if (max_irr != 256) {
vapic_page = kmap(vmx->nested.virtual_apic_page);
__kvm_apic_update_irr(vmx->nested.pi_desc->pir, vapic_page);
kunmap(vmx->nested.virtual_apic_page);
@@ -4935,11 +5044,16 @@
vmcs_write16(GUEST_INTR_STATUS, status);
}
}
+
+ nested_mark_vmcs12_pages_dirty(vcpu);
}
-static inline bool kvm_vcpu_trigger_posted_interrupt(struct kvm_vcpu *vcpu)
+static inline bool kvm_vcpu_trigger_posted_interrupt(struct kvm_vcpu *vcpu,
+ bool nested)
{
#ifdef CONFIG_SMP
+ int pi_vec = nested ? POSTED_INTR_NESTED_VECTOR : POSTED_INTR_VECTOR;
+
if (vcpu->mode == IN_GUEST_MODE) {
struct vcpu_vmx *vmx = to_vmx(vcpu);
@@ -4957,8 +5071,7 @@
*/
WARN_ON_ONCE(pi_test_sn(&vmx->pi_desc));
- apic->send_IPI_mask(get_cpu_mask(vcpu->cpu),
- POSTED_INTR_VECTOR);
+ apic->send_IPI_mask(get_cpu_mask(vcpu->cpu), pi_vec);
return true;
}
#endif
@@ -4973,7 +5086,7 @@
if (is_guest_mode(vcpu) &&
vector == vmx->nested.posted_intr_nv) {
/* the PIR and ON have been set by L1. */
- kvm_vcpu_trigger_posted_interrupt(vcpu);
+ kvm_vcpu_trigger_posted_interrupt(vcpu, true);
/*
* If a posted intr is not recognized by hardware,
* we will accomplish it in the next vmentry.
@@ -5007,7 +5120,7 @@
if (pi_test_and_set_on(&vmx->pi_desc))
return;
- if (!kvm_vcpu_trigger_posted_interrupt(vcpu))
+ if (!kvm_vcpu_trigger_posted_interrupt(vcpu, false))
kvm_vcpu_kick(vcpu);
}
@@ -5465,10 +5578,8 @@
{
struct vcpu_vmx *vmx = to_vmx(vcpu);
- if (!is_guest_mode(vcpu)) {
- ++vcpu->stat.nmi_injections;
- vmx->nmi_known_unmasked = false;
- }
+ ++vcpu->stat.nmi_injections;
+ vmx->loaded_vmcs->nmi_known_unmasked = false;
if (vmx->rmode.vm86_active) {
if (kvm_inject_realmode_interrupt(vcpu, NMI_VECTOR, 0) != EMULATE_DONE)
@@ -5482,16 +5593,21 @@
static bool vmx_get_nmi_mask(struct kvm_vcpu *vcpu)
{
- if (to_vmx(vcpu)->nmi_known_unmasked)
+ struct vcpu_vmx *vmx = to_vmx(vcpu);
+ bool masked;
+
+ if (vmx->loaded_vmcs->nmi_known_unmasked)
return false;
- return vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) & GUEST_INTR_STATE_NMI;
+ masked = vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) & GUEST_INTR_STATE_NMI;
+ vmx->loaded_vmcs->nmi_known_unmasked = !masked;
+ return masked;
}
static void vmx_set_nmi_mask(struct kvm_vcpu *vcpu, bool masked)
{
struct vcpu_vmx *vmx = to_vmx(vcpu);
- vmx->nmi_known_unmasked = !masked;
+ vmx->loaded_vmcs->nmi_known_unmasked = !masked;
if (masked)
vmcs_set_bits(GUEST_INTERRUPTIBILITY_INFO,
GUEST_INTR_STATE_NMI);
@@ -5664,14 +5780,11 @@
}
if (is_page_fault(intr_info)) {
- /* EPT won't cause page fault directly */
- BUG_ON(enable_ept);
cr2 = vmcs_readl(EXIT_QUALIFICATION);
- trace_kvm_page_fault(cr2, error_code);
-
- if (kvm_event_needs_reinjection(vcpu))
- kvm_mmu_unprotect_page_virt(vcpu, cr2);
- return kvm_mmu_page_fault(vcpu, cr2, error_code, NULL, 0);
+ /* EPT won't cause page fault directly */
+ WARN_ON_ONCE(!vcpu->arch.apf.host_apf_reason && enable_ept);
+ return kvm_handle_page_fault(vcpu, error_code, cr2, NULL, 0,
+ true);
}
ex_no = intr_info & INTR_INFO_VECTOR_MASK;
@@ -7082,34 +7195,32 @@
return 1;
}
+static void vmx_disable_shadow_vmcs(struct vcpu_vmx *vmx)
+{
+ vmcs_clear_bits(SECONDARY_VM_EXEC_CONTROL, SECONDARY_EXEC_SHADOW_VMCS);
+ vmcs_write64(VMCS_LINK_POINTER, -1ull);
+}
+
static inline void nested_release_vmcs12(struct vcpu_vmx *vmx)
{
if (vmx->nested.current_vmptr == -1ull)
return;
- /* current_vmptr and current_vmcs12 are always set/reset together */
- if (WARN_ON(vmx->nested.current_vmcs12 == NULL))
- return;
-
if (enable_shadow_vmcs) {
/* copy to memory all shadowed fields in case
they were modified */
copy_shadow_to_vmcs12(vmx);
vmx->nested.sync_shadow_vmcs = false;
- vmcs_clear_bits(SECONDARY_VM_EXEC_CONTROL,
- SECONDARY_EXEC_SHADOW_VMCS);
- vmcs_write64(VMCS_LINK_POINTER, -1ull);
+ vmx_disable_shadow_vmcs(vmx);
}
vmx->nested.posted_intr_nv = -1;
/* Flush VMCS12 to guest memory */
- memcpy(vmx->nested.current_vmcs12, vmx->nested.cached_vmcs12,
- VMCS12_SIZE);
+ kvm_vcpu_write_guest_page(&vmx->vcpu,
+ vmx->nested.current_vmptr >> PAGE_SHIFT,
+ vmx->nested.cached_vmcs12, 0, VMCS12_SIZE);
- kunmap(vmx->nested.current_vmcs12_page);
- nested_release_page(vmx->nested.current_vmcs12_page);
vmx->nested.current_vmptr = -1ull;
- vmx->nested.current_vmcs12 = NULL;
}
/*
@@ -7123,12 +7234,14 @@
vmx->nested.vmxon = false;
free_vpid(vmx->nested.vpid02);
- nested_release_vmcs12(vmx);
+ vmx->nested.posted_intr_nv = -1;
+ vmx->nested.current_vmptr = -1ull;
if (vmx->nested.msr_bitmap) {
free_page((unsigned long)vmx->nested.msr_bitmap);
vmx->nested.msr_bitmap = NULL;
}
if (enable_shadow_vmcs) {
+ vmx_disable_shadow_vmcs(vmx);
vmcs_clear(vmx->vmcs01.shadow_vmcs);
free_vmcs(vmx->vmcs01.shadow_vmcs);
vmx->vmcs01.shadow_vmcs = NULL;
@@ -7214,25 +7327,6 @@
return nested_vmx_run(vcpu, false);
}
-enum vmcs_field_type {
- VMCS_FIELD_TYPE_U16 = 0,
- VMCS_FIELD_TYPE_U64 = 1,
- VMCS_FIELD_TYPE_U32 = 2,
- VMCS_FIELD_TYPE_NATURAL_WIDTH = 3
-};
-
-static inline int vmcs_field_type(unsigned long field)
-{
- if (0x1 & field) /* the *_HIGH fields are all 32 bit */
- return VMCS_FIELD_TYPE_U32;
- return (field >> 13) & 0x3 ;
-}
-
-static inline int vmcs_field_readonly(unsigned long field)
-{
- return (((field >> 10) & 0x3) == 1);
-}
-
/*
* Read a vmcs12 field. Since these can have varying lengths and we return
* one type, we chose the biggest type (u64) and zero-extend the return value
@@ -7546,14 +7640,14 @@
}
nested_release_vmcs12(vmx);
- vmx->nested.current_vmcs12 = new_vmcs12;
- vmx->nested.current_vmcs12_page = page;
/*
* Load VMCS12 from guest memory since it is not already
* cached.
*/
- memcpy(vmx->nested.cached_vmcs12,
- vmx->nested.current_vmcs12, VMCS12_SIZE);
+ memcpy(vmx->nested.cached_vmcs12, new_vmcs12, VMCS12_SIZE);
+ kunmap(page);
+ nested_release_page_clean(page);
+
set_current_vmptr(vmx, vmptr);
}
@@ -7986,12 +8080,11 @@
* should handle it ourselves in L0 (and then continue L2). Only call this
* when in is_guest_mode (L2).
*/
-static bool nested_vmx_exit_handled(struct kvm_vcpu *vcpu)
+static bool nested_vmx_exit_reflected(struct kvm_vcpu *vcpu, u32 exit_reason)
{
u32 intr_info = vmcs_read32(VM_EXIT_INTR_INFO);
struct vcpu_vmx *vmx = to_vmx(vcpu);
struct vmcs12 *vmcs12 = get_vmcs12(vcpu);
- u32 exit_reason = vmx->exit_reason;
trace_kvm_nested_vmexit(kvm_rip_read(vcpu), exit_reason,
vmcs_readl(EXIT_QUALIFICATION),
@@ -8000,6 +8093,18 @@
vmcs_read32(VM_EXIT_INTR_ERROR_CODE),
KVM_ISA_VMX);
+ /*
+ * The host physical addresses of some pages of guest memory
+ * are loaded into VMCS02 (e.g. L1's Virtual APIC Page). The CPU
+ * may write to these pages via their host physical address while
+ * L2 is running, bypassing any address-translation-based dirty
+ * tracking (e.g. EPT write protection).
+ *
+ * Mark them dirty on every exit from L2 to prevent them from
+ * getting out of sync with dirty tracking.
+ */
+ nested_mark_vmcs12_pages_dirty(vcpu);
+
if (vmx->nested.nested_run_pending)
return false;
@@ -8014,7 +8119,7 @@
if (is_nmi(intr_info))
return false;
else if (is_page_fault(intr_info))
- return enable_ept;
+ return !vmx->vcpu.arch.apf.host_apf_reason && enable_ept;
else if (is_no_device(intr_info) &&
!(vmcs12->guest_cr0 & X86_CR0_TS))
return false;
@@ -8136,6 +8241,29 @@
}
}
+static int nested_vmx_reflect_vmexit(struct kvm_vcpu *vcpu, u32 exit_reason)
+{
+ u32 exit_intr_info = vmcs_read32(VM_EXIT_INTR_INFO);
+
+ /*
+ * At this point, the exit interruption info in exit_intr_info
+ * is only valid for EXCEPTION_NMI exits. For EXTERNAL_INTERRUPT
+ * we need to query the in-kernel LAPIC.
+ */
+ WARN_ON(exit_reason == EXIT_REASON_EXTERNAL_INTERRUPT);
+ if ((exit_intr_info &
+ (INTR_INFO_VALID_MASK | INTR_INFO_DELIVER_CODE_MASK)) ==
+ (INTR_INFO_VALID_MASK | INTR_INFO_DELIVER_CODE_MASK)) {
+ struct vmcs12 *vmcs12 = get_vmcs12(vcpu);
+ vmcs12->vm_exit_intr_error_code =
+ vmcs_read32(VM_EXIT_INTR_ERROR_CODE);
+ }
+
+ nested_vmx_vmexit(vcpu, exit_reason, exit_intr_info,
+ vmcs_readl(EXIT_QUALIFICATION));
+ return 1;
+}
+
static void vmx_get_exit_info(struct kvm_vcpu *vcpu, u64 *info1, u64 *info2)
{
*info1 = vmcs_readl(EXIT_QUALIFICATION);
@@ -8382,12 +8510,8 @@
if (vmx->emulation_required)
return handle_invalid_guest_state(vcpu);
- if (is_guest_mode(vcpu) && nested_vmx_exit_handled(vcpu)) {
- nested_vmx_vmexit(vcpu, exit_reason,
- vmcs_read32(VM_EXIT_INTR_INFO),
- vmcs_readl(EXIT_QUALIFICATION));
- return 1;
- }
+ if (is_guest_mode(vcpu) && nested_vmx_exit_reflected(vcpu, exit_reason))
+ return nested_vmx_reflect_vmexit(vcpu, exit_reason);
if (exit_reason & VMX_EXIT_REASONS_FAILED_VMENTRY) {
dump_vmcs();
@@ -8418,9 +8542,15 @@
exit_reason != EXIT_REASON_TASK_SWITCH)) {
vcpu->run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
vcpu->run->internal.suberror = KVM_INTERNAL_ERROR_DELIVERY_EV;
- vcpu->run->internal.ndata = 2;
+ vcpu->run->internal.ndata = 3;
vcpu->run->internal.data[0] = vectoring_info;
vcpu->run->internal.data[1] = exit_reason;
+ vcpu->run->internal.data[2] = vcpu->arch.exit_qualification;
+ if (exit_reason == EXIT_REASON_EPT_MISCONFIG) {
+ vcpu->run->internal.ndata++;
+ vcpu->run->internal.data[3] =
+ vmcs_read64(GUEST_PHYSICAL_ADDRESS);
+ }
return 0;
}
@@ -8611,17 +8741,24 @@
static void vmx_complete_atomic_exit(struct vcpu_vmx *vmx)
{
- u32 exit_intr_info;
+ u32 exit_intr_info = 0;
+ u16 basic_exit_reason = (u16)vmx->exit_reason;
- if (!(vmx->exit_reason == EXIT_REASON_MCE_DURING_VMENTRY
- || vmx->exit_reason == EXIT_REASON_EXCEPTION_NMI))
+ if (!(basic_exit_reason == EXIT_REASON_MCE_DURING_VMENTRY
+ || basic_exit_reason == EXIT_REASON_EXCEPTION_NMI))
return;
- vmx->exit_intr_info = vmcs_read32(VM_EXIT_INTR_INFO);
- exit_intr_info = vmx->exit_intr_info;
+ if (!(vmx->exit_reason & VMX_EXIT_REASONS_FAILED_VMENTRY))
+ exit_intr_info = vmcs_read32(VM_EXIT_INTR_INFO);
+ vmx->exit_intr_info = exit_intr_info;
+
+ /* if exit due to PF check for async PF */
+ if (is_page_fault(exit_intr_info))
+ vmx->vcpu.arch.apf.host_apf_reason = kvm_read_and_reset_pf_reason();
/* Handle machine checks before interrupts are enabled */
- if (is_machine_check(exit_intr_info))
+ if (basic_exit_reason == EXIT_REASON_MCE_DURING_VMENTRY ||
+ is_machine_check(exit_intr_info))
kvm_machine_check();
/* We need to handle NMIs before interrupts are enabled */
@@ -8700,7 +8837,7 @@
idtv_info_valid = vmx->idt_vectoring_info & VECTORING_INFO_VALID_MASK;
- if (vmx->nmi_known_unmasked)
+ if (vmx->loaded_vmcs->nmi_known_unmasked)
return;
/*
* Can't use vmx->exit_intr_info since we're not sure what
@@ -8724,7 +8861,7 @@
vmcs_set_bits(GUEST_INTERRUPTIBILITY_INFO,
GUEST_INTR_STATE_NMI);
else
- vmx->nmi_known_unmasked =
+ vmx->loaded_vmcs->nmi_known_unmasked =
!(vmcs_read32(GUEST_INTERRUPTIBILITY_INFO)
& GUEST_INTR_STATE_NMI);
}
@@ -9177,7 +9314,6 @@
vmx->nested.posted_intr_nv = -1;
vmx->nested.current_vmptr = -1ull;
- vmx->nested.current_vmcs12 = NULL;
vmx->msr_ia32_feature_control_valid_bits = FEATURE_CONTROL_LOCKED;
@@ -9463,12 +9599,15 @@
WARN_ON(!is_guest_mode(vcpu));
- if (nested_vmx_is_page_fault_vmexit(vmcs12, fault->error_code))
- nested_vmx_vmexit(vcpu, to_vmx(vcpu)->exit_reason,
- vmcs_read32(VM_EXIT_INTR_INFO),
- vmcs_readl(EXIT_QUALIFICATION));
- else
+ if (nested_vmx_is_page_fault_vmexit(vmcs12, fault->error_code)) {
+ vmcs12->vm_exit_intr_error_code = fault->error_code;
+ nested_vmx_vmexit(vcpu, EXIT_REASON_EXCEPTION_NMI,
+ PF_VECTOR | INTR_TYPE_HARD_EXCEPTION |
+ INTR_INFO_DELIVER_CODE_MASK | INTR_INFO_VALID_MASK,
+ fault->address);
+ } else {
kvm_inject_page_fault(vcpu, fault);
+ }
}
static inline bool nested_vmx_merge_msr_bitmap(struct kvm_vcpu *vcpu,
@@ -9589,23 +9728,26 @@
ns_to_ktime(preemption_timeout), HRTIMER_MODE_REL);
}
+static int nested_vmx_check_io_bitmap_controls(struct kvm_vcpu *vcpu,
+ struct vmcs12 *vmcs12)
+{
+ if (!nested_cpu_has(vmcs12, CPU_BASED_USE_IO_BITMAPS))
+ return 0;
+
+ if (!page_address_valid(vcpu, vmcs12->io_bitmap_a) ||
+ !page_address_valid(vcpu, vmcs12->io_bitmap_b))
+ return -EINVAL;
+
+ return 0;
+}
+
static int nested_vmx_check_msr_bitmap_controls(struct kvm_vcpu *vcpu,
struct vmcs12 *vmcs12)
{
- int maxphyaddr;
- u64 addr;
-
if (!nested_cpu_has(vmcs12, CPU_BASED_USE_MSR_BITMAPS))
return 0;
- if (vmcs12_read_any(vcpu, MSR_BITMAP, &addr)) {
- WARN_ON(1);
- return -EINVAL;
- }
- maxphyaddr = cpuid_maxphyaddr(vcpu);
-
- if (!PAGE_ALIGNED(vmcs12->msr_bitmap) ||
- ((addr + PAGE_SIZE) >> maxphyaddr))
+ if (!page_address_valid(vcpu, vmcs12->msr_bitmap))
return -EINVAL;
return 0;
@@ -9993,6 +10135,8 @@
vmcs12->vm_entry_instruction_len);
vmcs_write32(GUEST_INTERRUPTIBILITY_INFO,
vmcs12->guest_interruptibility_info);
+ vmx->loaded_vmcs->nmi_known_unmasked =
+ !(vmcs12->guest_interruptibility_info & GUEST_INTR_STATE_NMI);
} else {
vmcs_write32(VM_ENTRY_INTR_INFO_FIELD, 0);
}
@@ -10017,13 +10161,9 @@
/* Posted interrupts setting is only taken from vmcs12. */
if (nested_cpu_has_posted_intr(vmcs12)) {
- /*
- * Note that we use L0's vector here and in
- * vmx_deliver_nested_posted_interrupt.
- */
vmx->nested.posted_intr_nv = vmcs12->posted_intr_nv;
vmx->nested.pi_pending = false;
- vmcs_write16(POSTED_INTR_NV, POSTED_INTR_VECTOR);
+ vmcs_write16(POSTED_INTR_NV, POSTED_INTR_NESTED_VECTOR);
} else {
exec_control &= ~PIN_BASED_POSTED_INTR;
}
@@ -10047,12 +10187,6 @@
* "or"ing of the EB of vmcs01 and vmcs12, because when enable_ept,
* vmcs01's EB.PF is 0 so the "or" will take vmcs12's value, and when
* !enable_ept, EB.PF is 1, so the "or" will always be 1.
- *
- * A problem with this approach (when !enable_ept) is that L1 may be
- * injected with more page faults than it asked for. This could have
- * caused problems, but in practice existing hypervisors don't care.
- * To fix this, we will need to emulate the PFEC checking (on the L1
- * page tables), using walk_addr(), when injecting PFs to L1.
*/
vmcs_write32(PAGE_FAULT_ERROR_CODE_MASK,
enable_ept ? vmcs12->page_fault_error_code_mask : 0);
@@ -10293,6 +10427,9 @@
vmcs12->guest_activity_state != GUEST_ACTIVITY_HLT)
return VMXERR_ENTRY_INVALID_CONTROL_FIELD;
+ if (nested_vmx_check_io_bitmap_controls(vcpu, vmcs12))
+ return VMXERR_ENTRY_INVALID_CONTROL_FIELD;
+
if (nested_vmx_check_msr_bitmap_controls(vcpu, vmcs12))
return VMXERR_ENTRY_INVALID_CONTROL_FIELD;
@@ -10429,8 +10566,6 @@
return 1;
}
- vmcs12->launch_state = 1;
-
/*
* Note no nested_vmx_succeed or nested_vmx_fail here. At this point
* we are no longer running L1, and VMLAUNCH/VMRESUME has not yet
@@ -10448,6 +10583,7 @@
{
struct vmcs12 *vmcs12;
struct vcpu_vmx *vmx = to_vmx(vcpu);
+ u32 interrupt_shadow = vmx_get_interrupt_shadow(vcpu);
u32 exit_qual;
int ret;
@@ -10472,6 +10608,12 @@
* for misconfigurations which will anyway be caught by the processor
* when using the merged vmcs02.
*/
+ if (interrupt_shadow & KVM_X86_SHADOW_INT_MOV_SS) {
+ nested_vmx_failValid(vcpu,
+ VMXERR_ENTRY_EVENTS_BLOCKED_BY_MOV_SS);
+ goto out;
+ }
+
if (vmcs12->launch_state == launch) {
nested_vmx_failValid(vcpu,
launch ? VMXERR_VMLAUNCH_NONCLEAR_VMCS
@@ -10792,18 +10934,15 @@
vmcs12->vm_exit_reason = exit_reason;
vmcs12->exit_qualification = exit_qualification;
-
vmcs12->vm_exit_intr_info = exit_intr_info;
- if ((vmcs12->vm_exit_intr_info &
- (INTR_INFO_VALID_MASK | INTR_INFO_DELIVER_CODE_MASK)) ==
- (INTR_INFO_VALID_MASK | INTR_INFO_DELIVER_CODE_MASK))
- vmcs12->vm_exit_intr_error_code =
- vmcs_read32(VM_EXIT_INTR_ERROR_CODE);
+
vmcs12->idt_vectoring_info_field = 0;
vmcs12->vm_exit_instruction_len = vmcs_read32(VM_EXIT_INSTRUCTION_LEN);
vmcs12->vmx_instruction_info = vmcs_read32(VMX_INSTRUCTION_INFO);
if (!(vmcs12->vm_exit_reason & VMX_EXIT_REASONS_FAILED_VMENTRY)) {
+ vmcs12->launch_state = 1;
+
/* vm_entry_intr_info_field is cleared on exit. Emulate this
* instead of reading the real value. */
vmcs12->vm_entry_intr_info_field &= ~INTR_INFO_VALID_MASK;
@@ -10884,7 +11023,9 @@
*/
vmx_flush_tlb(vcpu);
}
-
+ /* Restore posted intr vector. */
+ if (nested_cpu_has_posted_intr(vmcs12))
+ vmcs_write16(POSTED_INTR_NV, POSTED_INTR_VECTOR);
vmcs_write32(GUEST_SYSENTER_CS, vmcs12->host_ia32_sysenter_cs);
vmcs_writel(GUEST_SYSENTER_ESP, vmcs12->host_ia32_sysenter_esp);
@@ -10990,8 +11131,15 @@
vmx_switch_vmcs(vcpu, &vmx->vmcs01);
- if ((exit_reason == EXIT_REASON_EXTERNAL_INTERRUPT)
- && nested_exit_intr_ack_set(vcpu)) {
+ /*
+ * TODO: SDM says that with acknowledge interrupt on exit, bit 31 of
+ * the VM-exit interrupt information (valid interrupt) is always set to
+ * 1 on EXIT_REASON_EXTERNAL_INTERRUPT, so we shouldn't need
+ * kvm_cpu_has_interrupt(). See the commit message for details.
+ */
+ if (nested_exit_intr_ack_set(vcpu) &&
+ exit_reason == EXIT_REASON_EXTERNAL_INTERRUPT &&
+ kvm_cpu_has_interrupt(vcpu)) {
int irq = kvm_cpu_get_interrupt(vcpu);
WARN_ON(irq < 0);
vmcs12->vm_exit_intr_info = irq |
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 6c7266f..d734aa8 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -134,8 +134,6 @@
static bool __read_mostly vector_hashing = true;
module_param(vector_hashing, bool, S_IRUGO);
-static bool __read_mostly backwards_tsc_observed = false;
-
#define KVM_NR_SHARED_MSRS 16
struct kvm_shared_msrs_global {
@@ -452,7 +450,12 @@
void kvm_inject_page_fault(struct kvm_vcpu *vcpu, struct x86_exception *fault)
{
++vcpu->stat.pf_guest;
- vcpu->arch.cr2 = fault->address;
+ vcpu->arch.exception.nested_apf =
+ is_guest_mode(vcpu) && fault->async_page_fault;
+ if (vcpu->arch.exception.nested_apf)
+ vcpu->arch.apf.nested_apf_token = fault->address;
+ else
+ vcpu->arch.cr2 = fault->address;
kvm_queue_exception_e(vcpu, PF_VECTOR, fault->error_code);
}
EXPORT_SYMBOL_GPL(kvm_inject_page_fault);
@@ -594,8 +597,8 @@
(unsigned long *)&vcpu->arch.regs_avail))
return true;
- gfn = (kvm_read_cr3(vcpu) & ~31u) >> PAGE_SHIFT;
- offset = (kvm_read_cr3(vcpu) & ~31u) & (PAGE_SIZE - 1);
+ gfn = (kvm_read_cr3(vcpu) & 0xffffffe0ul) >> PAGE_SHIFT;
+ offset = (kvm_read_cr3(vcpu) & 0xffffffe0ul) & (PAGE_SIZE - 1);
r = kvm_read_nested_guest_page(vcpu, gfn, pdpte, offset, sizeof(pdpte),
PFERR_USER_MASK | PFERR_WRITE_MASK);
if (r < 0)
@@ -1719,7 +1722,7 @@
&ka->master_cycle_now);
ka->use_master_clock = host_tsc_clocksource && vcpus_matched
- && !backwards_tsc_observed
+ && !ka->backwards_tsc_observed
&& !ka->boot_vcpu_runs_old_kvmclock;
if (ka->use_master_clock)
@@ -2060,8 +2063,8 @@
{
gpa_t gpa = data & ~0x3f;
- /* Bits 2:5 are reserved, Should be zero */
- if (data & 0x3c)
+ /* Bits 3:5 are reserved, Should be zero */
+ if (data & 0x38)
return 1;
vcpu->arch.apf.msr_val = data;
@@ -2077,6 +2080,7 @@
return 1;
vcpu->arch.apf.send_user_only = !(data & KVM_ASYNC_PF_SEND_ALWAYS);
+ vcpu->arch.apf.delivery_as_pf_vmexit = data & KVM_ASYNC_PF_DELIVERY_AS_PF_VMEXIT;
kvm_async_pf_wakeup_all(vcpu);
return 0;
}
@@ -2661,6 +2665,8 @@
case KVM_CAP_HYPERV_VAPIC:
case KVM_CAP_HYPERV_SPIN:
case KVM_CAP_HYPERV_SYNIC:
+ case KVM_CAP_HYPERV_SYNIC2:
+ case KVM_CAP_HYPERV_VP_INDEX:
case KVM_CAP_PCI_SEGMENT:
case KVM_CAP_DEBUGREGS:
case KVM_CAP_X86_ROBUST_SINGLESTEP:
@@ -3153,15 +3159,18 @@
kvm_set_hflags(vcpu, hflags);
vcpu->arch.smi_pending = events->smi.pending;
- if (events->smi.smm_inside_nmi)
- vcpu->arch.hflags |= HF_SMM_INSIDE_NMI_MASK;
- else
- vcpu->arch.hflags &= ~HF_SMM_INSIDE_NMI_MASK;
- if (lapic_in_kernel(vcpu)) {
- if (events->smi.latched_init)
- set_bit(KVM_APIC_INIT, &vcpu->arch.apic->pending_events);
+
+ if (events->smi.smm) {
+ if (events->smi.smm_inside_nmi)
+ vcpu->arch.hflags |= HF_SMM_INSIDE_NMI_MASK;
else
- clear_bit(KVM_APIC_INIT, &vcpu->arch.apic->pending_events);
+ vcpu->arch.hflags &= ~HF_SMM_INSIDE_NMI_MASK;
+ if (lapic_in_kernel(vcpu)) {
+ if (events->smi.latched_init)
+ set_bit(KVM_APIC_INIT, &vcpu->arch.apic->pending_events);
+ else
+ clear_bit(KVM_APIC_INIT, &vcpu->arch.apic->pending_events);
+ }
}
}
@@ -3384,10 +3393,14 @@
return -EINVAL;
switch (cap->cap) {
+ case KVM_CAP_HYPERV_SYNIC2:
+ if (cap->args[0])
+ return -EINVAL;
case KVM_CAP_HYPERV_SYNIC:
if (!irqchip_in_kernel(vcpu->kvm))
return -EINVAL;
- return kvm_hv_activate_synic(vcpu);
+ return kvm_hv_activate_synic(vcpu, cap->cap ==
+ KVM_CAP_HYPERV_SYNIC2);
default:
return -EINVAL;
}
@@ -4188,9 +4201,15 @@
goto out;
r = 0;
+ /*
+ * TODO: userspace has to take care of races with VCPU_RUN, so
+ * kvm_gen_update_masterclock() can be cut down to locked
+ * pvclock_update_vm_gtod_copy().
+ */
+ kvm_gen_update_masterclock(kvm);
now_ns = get_kvmclock_ns(kvm);
kvm->arch.kvmclock_offset += user_ns.clock - now_ns;
- kvm_gen_update_masterclock(kvm);
+ kvm_make_all_cpus_request(kvm, KVM_REQ_CLOCK_UPDATE);
break;
}
case KVM_GET_CLOCK: {
@@ -6199,6 +6218,7 @@
lapic_irq.shorthand = 0;
lapic_irq.dest_mode = 0;
+ lapic_irq.level = 0;
lapic_irq.dest_id = apicid;
lapic_irq.msi_redir_hint = false;
@@ -6347,10 +6367,7 @@
kvm_update_dr7(vcpu);
}
- kvm_x86_ops->queue_exception(vcpu, vcpu->arch.exception.nr,
- vcpu->arch.exception.has_error_code,
- vcpu->arch.exception.error_code,
- vcpu->arch.exception.reinject);
+ kvm_x86_ops->queue_exception(vcpu);
return 0;
}
@@ -7676,6 +7693,8 @@
struct msr_data msr;
struct kvm *kvm = vcpu->kvm;
+ kvm_hv_vcpu_postcreate(vcpu);
+
if (vcpu_load(vcpu))
return;
msr.data = 0x0;
@@ -7829,8 +7848,8 @@
*/
if (backwards_tsc) {
u64 delta_cyc = max_tsc - local_tsc;
- backwards_tsc_observed = true;
list_for_each_entry(kvm, &vm_list, vm_list) {
+ kvm->arch.backwards_tsc_observed = true;
kvm_for_each_vcpu(i, vcpu, kvm) {
vcpu->arch.tsc_offset_adjustment += delta_cyc;
vcpu->arch.last_host_tsc = local_tsc;
@@ -8576,6 +8595,7 @@
fault.error_code = 0;
fault.nested_page_fault = false;
fault.address = work->arch.token;
+ fault.async_page_fault = true;
kvm_inject_page_fault(vcpu, &fault);
}
}
@@ -8598,6 +8618,7 @@
fault.error_code = 0;
fault.nested_page_fault = false;
fault.address = work->arch.token;
+ fault.async_page_fault = true;
kvm_inject_page_fault(vcpu, &fault);
}
vcpu->arch.apf.halted = false;
diff --git a/arch/x86/lib/memcpy_32.c b/arch/x86/lib/memcpy_32.c
index cad1263..2eab7d0 100644
--- a/arch/x86/lib/memcpy_32.c
+++ b/arch/x86/lib/memcpy_32.c
@@ -6,7 +6,7 @@
__visible void *memcpy(void *to, const void *from, size_t n)
{
-#ifdef CONFIG_X86_USE_3DNOW
+#if defined(CONFIG_X86_USE_3DNOW) && !defined(CONFIG_FORTIFY_SOURCE)
return __memcpy3d(to, from, n);
#else
return __memcpy(to, from, n);
diff --git a/arch/x86/math-emu/Makefile b/arch/x86/math-emu/Makefile
index 9b0c63b..1b2dac1 100644
--- a/arch/x86/math-emu/Makefile
+++ b/arch/x86/math-emu/Makefile
@@ -5,8 +5,8 @@
#DEBUG = -DDEBUGGING
DEBUG =
PARANOID = -DPARANOID
-EXTRA_CFLAGS := $(PARANOID) $(DEBUG) -fno-builtin $(MATH_EMULATION)
-EXTRA_AFLAGS := $(PARANOID)
+ccflags-y += $(PARANOID) $(DEBUG) -fno-builtin $(MATH_EMULATION)
+asflags-y += $(PARANOID)
# From 'C' language sources:
C_OBJS =fpu_entry.o errors.o \
diff --git a/arch/x86/math-emu/fpu_emu.h b/arch/x86/math-emu/fpu_emu.h
index afbc4d8..c9c320d 100644
--- a/arch/x86/math-emu/fpu_emu.h
+++ b/arch/x86/math-emu/fpu_emu.h
@@ -157,7 +157,7 @@
#define signbyte(a) (((u_char *)(a))[9])
#define getsign(a) (signbyte(a) & 0x80)
-#define setsign(a,b) { if (b) signbyte(a) |= 0x80; else signbyte(a) &= 0x7f; }
+#define setsign(a,b) { if ((b) != 0) signbyte(a) |= 0x80; else signbyte(a) &= 0x7f; }
#define copysign(a,b) { if (getsign(a)) signbyte(b) |= 0x80; \
else signbyte(b) &= 0x7f; }
#define changesign(a) { signbyte(a) ^= 0x80; }
diff --git a/arch/x86/math-emu/reg_compare.c b/arch/x86/math-emu/reg_compare.c
index b77360f..19b33b5 100644
--- a/arch/x86/math-emu/reg_compare.c
+++ b/arch/x86/math-emu/reg_compare.c
@@ -168,7 +168,7 @@
/* This function requires that st(0) is not empty */
int FPU_compare_st_data(FPU_REG const *loaded_data, u_char loaded_tag)
{
- int f = 0, c;
+ int f, c;
c = compare(loaded_data, loaded_tag);
@@ -189,12 +189,12 @@
case COMP_No_Comp:
f = SW_C3 | SW_C2 | SW_C0;
break;
-#ifdef PARANOID
default:
+#ifdef PARANOID
EXCEPTION(EX_INTERNAL | 0x121);
+#endif /* PARANOID */
f = SW_C3 | SW_C2 | SW_C0;
break;
-#endif /* PARANOID */
}
setcc(f);
if (c & COMP_Denormal) {
@@ -205,7 +205,7 @@
static int compare_st_st(int nr)
{
- int f = 0, c;
+ int f, c;
FPU_REG *st_ptr;
if (!NOT_EMPTY(0) || !NOT_EMPTY(nr)) {
@@ -235,12 +235,12 @@
case COMP_No_Comp:
f = SW_C3 | SW_C2 | SW_C0;
break;
-#ifdef PARANOID
default:
+#ifdef PARANOID
EXCEPTION(EX_INTERNAL | 0x122);
+#endif /* PARANOID */
f = SW_C3 | SW_C2 | SW_C0;
break;
-#endif /* PARANOID */
}
setcc(f);
if (c & COMP_Denormal) {
@@ -283,12 +283,12 @@
case COMP_No_Comp:
f = X86_EFLAGS_ZF | X86_EFLAGS_PF | X86_EFLAGS_CF;
break;
-#ifdef PARANOID
default:
+#ifdef PARANOID
EXCEPTION(EX_INTERNAL | 0x122);
+#endif /* PARANOID */
f = 0;
break;
-#endif /* PARANOID */
}
FPU_EFLAGS = (FPU_EFLAGS & ~(X86_EFLAGS_ZF | X86_EFLAGS_PF | X86_EFLAGS_CF)) | f;
if (c & COMP_Denormal) {
diff --git a/arch/x86/mm/mmap.c b/arch/x86/mm/mmap.c
index 797295e..229d04a 100644
--- a/arch/x86/mm/mmap.c
+++ b/arch/x86/mm/mmap.c
@@ -92,13 +92,18 @@
static unsigned long mmap_base(unsigned long rnd, unsigned long task_size)
{
unsigned long gap = rlimit(RLIMIT_STACK);
+ unsigned long pad = stack_maxrandom_size(task_size) + stack_guard_gap;
unsigned long gap_min, gap_max;
+ /* Values close to RLIM_INFINITY can overflow. */
+ if (gap + pad > gap)
+ gap += pad;
+
/*
* Top of mmap area (just below the process stack).
* Leave an at least ~128 MB hole with possible stack randomization.
*/
- gap_min = SIZE_128M + stack_maxrandom_size(task_size);
+ gap_min = SIZE_128M;
gap_max = (task_size / 6) * 5;
if (gap < gap_min)
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_max7315.c b/arch/x86/platform/intel-mid/device_libs/platform_max7315.c
index 6e075af..58337b2 100644
--- a/arch/x86/platform/intel-mid/device_libs/platform_max7315.c
+++ b/arch/x86/platform/intel-mid/device_libs/platform_max7315.c
@@ -38,8 +38,10 @@
*/
strcpy(i2c_info->type, "max7315");
if (nr++) {
- sprintf(base_pin_name, "max7315_%d_base", nr);
- sprintf(intr_pin_name, "max7315_%d_int", nr);
+ snprintf(base_pin_name, sizeof(base_pin_name),
+ "max7315_%d_base", nr);
+ snprintf(intr_pin_name, sizeof(intr_pin_name),
+ "max7315_%d_int", nr);
} else {
strcpy(base_pin_name, "max7315_base");
strcpy(intr_pin_name, "max7315_int");
diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c
index d4a61dd..3e4bdb4 100644
--- a/arch/x86/platform/uv/tlb_uv.c
+++ b/arch/x86/platform/uv/tlb_uv.c
@@ -40,7 +40,6 @@
static int timeout_us;
static bool nobau = true;
static int nobau_perm;
-static cycles_t congested_cycles;
/* tunables: */
static int max_concurr = MAX_BAU_CONCURRENT;
@@ -829,10 +828,10 @@
if ((completion_status == FLUSH_COMPLETE) && (try == 1)) {
bcp->period_requests++;
bcp->period_time += elapsed;
- if ((elapsed > congested_cycles) &&
+ if ((elapsed > usec_2_cycles(bcp->cong_response_us)) &&
(bcp->period_requests > bcp->cong_reps) &&
((bcp->period_time / bcp->period_requests) >
- congested_cycles)) {
+ usec_2_cycles(bcp->cong_response_us))) {
stat->s_congested++;
disable_for_period(bcp, stat);
}
@@ -2222,14 +2221,17 @@
else if (is_uv1_hub())
ops = uv1_bau_ops;
+ nuvhubs = uv_num_possible_blades();
+ if (nuvhubs < 2) {
+ pr_crit("UV: BAU disabled - insufficient hub count\n");
+ goto err_bau_disable;
+ }
+
for_each_possible_cpu(cur_cpu) {
mask = &per_cpu(uv_flush_tlb_mask, cur_cpu);
zalloc_cpumask_var_node(mask, GFP_KERNEL, cpu_to_node(cur_cpu));
}
- nuvhubs = uv_num_possible_blades();
- congested_cycles = usec_2_cycles(congested_respns_us);
-
uv_base_pnode = 0x7fffffff;
for (uvhub = 0; uvhub < nuvhubs; uvhub++) {
cpus = uv_blade_nr_possible_cpus(uvhub);
@@ -2242,9 +2244,8 @@
enable_timeouts();
if (init_per_cpu(nuvhubs, uv_base_pnode)) {
- set_bau_off();
- nobau_perm = 1;
- return 0;
+ pr_crit("UV: BAU disabled - per CPU init failed\n");
+ goto err_bau_disable;
}
vector = UV_BAU_MESSAGE;
@@ -2270,6 +2271,16 @@
}
return 0;
+
+err_bau_disable:
+
+ for_each_possible_cpu(cur_cpu)
+ free_cpumask_var(per_cpu(uv_flush_tlb_mask, cur_cpu));
+
+ set_bau_off();
+ nobau_perm = 1;
+
+ return -EINVAL;
}
core_initcall(uv_bau_init);
fs_initcall(uv_ptc_init);
diff --git a/arch/x86/um/os-Linux/registers.c b/arch/x86/um/os-Linux/registers.c
index 00f54a9..28775f5 100644
--- a/arch/x86/um/os-Linux/registers.c
+++ b/arch/x86/um/os-Linux/registers.c
@@ -26,6 +26,7 @@
int save_fp_registers(int pid, unsigned long *fp_regs)
{
+#ifdef PTRACE_GETREGSET
struct iovec iov;
if (have_xstate_support) {
@@ -34,9 +35,9 @@
if (ptrace(PTRACE_GETREGSET, pid, NT_X86_XSTATE, &iov) < 0)
return -errno;
return 0;
- } else {
+ } else
+#endif
return save_i387_registers(pid, fp_regs);
- }
}
int restore_i387_registers(int pid, unsigned long *fp_regs)
@@ -48,6 +49,7 @@
int restore_fp_registers(int pid, unsigned long *fp_regs)
{
+#ifdef PTRACE_SETREGSET
struct iovec iov;
if (have_xstate_support) {
@@ -56,9 +58,9 @@
if (ptrace(PTRACE_SETREGSET, pid, NT_X86_XSTATE, &iov) < 0)
return -errno;
return 0;
- } else {
+ } else
+#endif
return restore_i387_registers(pid, fp_regs);
- }
}
#ifdef __i386__
@@ -122,6 +124,7 @@
void arch_init_registers(int pid)
{
+#ifdef PTRACE_GETREGSET
struct _xstate fp_regs;
struct iovec iov;
@@ -129,6 +132,7 @@
iov.iov_len = sizeof(struct _xstate);
if (ptrace(PTRACE_GETREGSET, pid, NT_X86_XSTATE, &iov) == 0)
have_xstate_support = 1;
+#endif
}
#endif
diff --git a/arch/x86/um/setjmp_32.S b/arch/x86/um/setjmp_32.S
index b766792..3905319 100644
--- a/arch/x86/um/setjmp_32.S
+++ b/arch/x86/um/setjmp_32.S
@@ -16,9 +16,9 @@
.text
.align 4
- .globl setjmp
- .type setjmp, @function
-setjmp:
+ .globl kernel_setjmp
+ .type kernel_setjmp, @function
+kernel_setjmp:
#ifdef _REGPARM
movl %eax,%edx
#else
@@ -35,13 +35,13 @@
movl %ecx,20(%edx) # Return address
ret
- .size setjmp,.-setjmp
+ .size kernel_setjmp,.-kernel_setjmp
.text
.align 4
- .globl longjmp
- .type longjmp, @function
-longjmp:
+ .globl kernel_longjmp
+ .type kernel_longjmp, @function
+kernel_longjmp:
#ifdef _REGPARM
xchgl %eax,%edx
#else
@@ -55,4 +55,4 @@
movl 16(%edx),%edi
jmp *20(%edx)
- .size longjmp,.-longjmp
+ .size kernel_longjmp,.-kernel_longjmp
diff --git a/arch/x86/um/setjmp_64.S b/arch/x86/um/setjmp_64.S
index 45f547b..c56942e 100644
--- a/arch/x86/um/setjmp_64.S
+++ b/arch/x86/um/setjmp_64.S
@@ -18,9 +18,9 @@
.text
.align 4
- .globl setjmp
- .type setjmp, @function
-setjmp:
+ .globl kernel_setjmp
+ .type kernel_setjmp, @function
+kernel_setjmp:
pop %rsi # Return address, and adjust the stack
xorl %eax,%eax # Return value
movq %rbx,(%rdi)
@@ -34,13 +34,13 @@
movq %rsi,56(%rdi) # Return address
ret
- .size setjmp,.-setjmp
+ .size kernel_setjmp,.-kernel_setjmp
.text
.align 4
- .globl longjmp
- .type longjmp, @function
-longjmp:
+ .globl kernel_longjmp
+ .type kernel_longjmp, @function
+kernel_longjmp:
movl %esi,%eax # Return value (int)
movq (%rdi),%rbx
movq 8(%rdi),%rsp
@@ -51,4 +51,4 @@
movq 48(%rdi),%r15
jmp *56(%rdi)
- .size longjmp,.-longjmp
+ .size kernel_longjmp,.-kernel_longjmp
diff --git a/arch/x86/um/user-offsets.c b/arch/x86/um/user-offsets.c
index cb3c223..ae4cd58 100644
--- a/arch/x86/um/user-offsets.c
+++ b/arch/x86/um/user-offsets.c
@@ -5,7 +5,7 @@
#include <sys/mman.h>
#include <sys/user.h>
#define __FRAME_OFFSETS
-#include <asm/ptrace.h>
+#include <linux/ptrace.h>
#include <asm/types.h>
#ifdef __i386__
@@ -50,7 +50,11 @@
DEFINE(HOST_GS, GS);
DEFINE(HOST_ORIG_AX, ORIG_EAX);
#else
+#if defined(PTRACE_GETREGSET) && defined(PTRACE_SETREGSET)
DEFINE(HOST_FP_SIZE, sizeof(struct _xstate) / sizeof(unsigned long));
+#else
+ DEFINE(HOST_FP_SIZE, sizeof(struct _fpstate) / sizeof(unsigned long));
+#endif
DEFINE_LONGS(HOST_BX, RBX);
DEFINE_LONGS(HOST_CX, RCX);
DEFINE_LONGS(HOST_DI, RDI);
diff --git a/arch/x86/xen/mmu_pv.c b/arch/x86/xen/mmu_pv.c
index 1d7a721..cab28cf 100644
--- a/arch/x86/xen/mmu_pv.c
+++ b/arch/x86/xen/mmu_pv.c
@@ -2693,8 +2693,8 @@
phys_addr_t paddr_vmcoreinfo_note(void)
{
if (xen_pv_domain())
- return virt_to_machine(&vmcoreinfo_note).maddr;
+ return virt_to_machine(vmcoreinfo_note).maddr;
else
- return __pa_symbol(&vmcoreinfo_note);
+ return __pa(vmcoreinfo_note);
}
#endif /* CONFIG_KEXEC_CORE */
diff --git a/arch/x86/xen/smp_pv.c b/arch/x86/xen/smp_pv.c
index 1ea598e..5147140 100644
--- a/arch/x86/xen/smp_pv.c
+++ b/arch/x86/xen/smp_pv.c
@@ -19,6 +19,7 @@
#include <linux/irq_work.h>
#include <linux/tick.h>
#include <linux/nmi.h>
+#include <linux/cpuhotplug.h>
#include <asm/paravirt.h>
#include <asm/desc.h>
@@ -413,7 +414,7 @@
*/
tick_nohz_idle_enter();
- cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
+ cpuhp_online_idle(CPUHP_AP_ONLINE_IDLE);
}
#else /* !CONFIG_HOTPLUG_CPU */
diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c
index a1895a8..1ecb05d 100644
--- a/arch/x86/xen/time.c
+++ b/arch/x86/xen/time.c
@@ -309,7 +309,6 @@
void xen_teardown_timer(int cpu)
{
struct clock_event_device *evt;
- BUG_ON(cpu == 0);
evt = &per_cpu(xen_clock_events, cpu).evt;
if (evt->irq >= 0) {
diff --git a/arch/xtensa/include/asm/Kbuild b/arch/xtensa/include/asm/Kbuild
index 30f62901..2d716eb 100644
--- a/arch/xtensa/include/asm/Kbuild
+++ b/arch/xtensa/include/asm/Kbuild
@@ -1,20 +1,17 @@
-generic-y += bitsperlong.h
generic-y += bug.h
generic-y += clkdev.h
generic-y += div64.h
generic-y += dma-contiguous.h
generic-y += emergency-restart.h
-generic-y += errno.h
generic-y += exec.h
generic-y += extable.h
-generic-y += fcntl.h
+generic-y += fb.h
generic-y += hardirq.h
-generic-y += ioctl.h
generic-y += irq_regs.h
generic-y += irq_work.h
generic-y += kdebug.h
generic-y += kmap_types.h
-generic-y += kvm_para.h
+generic-y += kprobes.h
generic-y += linkage.h
generic-y += local.h
generic-y += local64.h
@@ -22,13 +19,9 @@
generic-y += mm-arch-hooks.h
generic-y += percpu.h
generic-y += preempt.h
-generic-y += resource.h
generic-y += rwsem.h
generic-y += sections.h
-generic-y += statfs.h
-generic-y += termios.h
generic-y += topology.h
generic-y += trace_clock.h
generic-y += word-at-a-time.h
generic-y += xor.h
-generic-y += kprobes.h
diff --git a/arch/xtensa/include/asm/fb.h b/arch/xtensa/include/asm/fb.h
deleted file mode 100644
index c7df380..0000000
--- a/arch/xtensa/include/asm/fb.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _ASM_FB_H_
-#define _ASM_FB_H_
-#include <linux/fb.h>
-
-#define fb_pgprotect(...) do {} while (0)
-
-static inline int fb_is_primary_device(struct fb_info *info)
-{
- return 0;
-}
-
-#endif /* _ASM_FB_H_ */
diff --git a/arch/xtensa/include/asm/flat.h b/arch/xtensa/include/asm/flat.h
index 94c44ab..60e0d6a 100644
--- a/arch/xtensa/include/asm/flat.h
+++ b/arch/xtensa/include/asm/flat.h
@@ -1,11 +1,22 @@
#ifndef __ASM_XTENSA_FLAT_H
#define __ASM_XTENSA_FLAT_H
+#include <asm/unaligned.h>
+
#define flat_argvp_envp_on_stack() 0
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
-#define flat_get_addr_from_rp(rp, relval, flags, p) get_unaligned(rp)
-#define flat_put_addr_at_rp(rp, val, relval ) put_unaligned(val, rp)
+static inline int flat_get_addr_from_rp(u32 __user *rp, u32 relval, u32 flags,
+ u32 *addr, u32 *persistent)
+{
+ *addr = get_unaligned((__force u32 *)rp);
+ return 0;
+}
+static inline int flat_put_addr_at_rp(u32 __user *rp, u32 addr, u32 rel)
+{
+ put_unaligned(addr, (__force u32 *)rp);
+ return 0;
+}
#define flat_get_relocate_addr(rel) (rel)
#define flat_set_persistent(relval, p) 0
diff --git a/arch/xtensa/include/uapi/asm/Kbuild b/arch/xtensa/include/uapi/asm/Kbuild
index 4cb0d2f..a5bcdfb 100644
--- a/arch/xtensa/include/uapi/asm/Kbuild
+++ b/arch/xtensa/include/uapi/asm/Kbuild
@@ -1,3 +1,12 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
+
+generic-y += bitsperlong.h
+generic-y += errno.h
+generic-y += fcntl.h
+generic-y += ioctl.h
+generic-y += kvm_para.h
+generic-y += resource.h
generic-y += siginfo.h
+generic-y += statfs.h
+generic-y += termios.h
diff --git a/arch/xtensa/include/uapi/asm/ioctls.h b/arch/xtensa/include/uapi/asm/ioctls.h
index 98b004e..47d82c0 100644
--- a/arch/xtensa/include/uapi/asm/ioctls.h
+++ b/arch/xtensa/include/uapi/asm/ioctls.h
@@ -105,7 +105,7 @@
#define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */
#define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */
#define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */
-#define TIOCGPTPEER _IOR('T', 0x41, int) /* Safely open the slave */
+#define TIOCGPTPEER _IO('T', 0x41) /* Safely open the slave */
#define TIOCSERCONFIG _IO('T', 83)
#define TIOCSERGWILD _IOR('T', 84, int)
diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c
index 60a6835..436b6ca 100644
--- a/block/bfq-iosched.c
+++ b/block/bfq-iosched.c
@@ -4299,6 +4299,9 @@
bfq_bfqq_expire(bfqd, bfqq, false,
BFQQE_NO_MORE_REQUESTS);
}
+
+ if (!bfqd->rq_in_driver)
+ bfq_schedule_dispatch(bfqd);
}
static void bfq_put_rq_priv_body(struct bfq_queue *bfqq)
diff --git a/block/bfq-iosched.h b/block/bfq-iosched.h
index 8fd83b8..63e771a 100644
--- a/block/bfq-iosched.h
+++ b/block/bfq-iosched.h
@@ -52,7 +52,7 @@
struct bfq_service_tree {
/* tree for active entities (i.e., those backlogged) */
struct rb_root active;
- /* tree for idle entities (i.e., not backlogged, with V <= F_i)*/
+ /* tree for idle entities (i.e., not backlogged, with V < F_i)*/
struct rb_root idle;
/* idle entity with minimum F_i */
diff --git a/block/bfq-wf2q.c b/block/bfq-wf2q.c
index 5ec05cd..979f8f2 100644
--- a/block/bfq-wf2q.c
+++ b/block/bfq-wf2q.c
@@ -1297,7 +1297,7 @@
*
* This function searches the first schedulable entity, starting from the
* root of the tree and going on the left every time on this side there is
- * a subtree with at least one eligible (start >= vtime) entity. The path on
+ * a subtree with at least one eligible (start <= vtime) entity. The path on
* the right is followed only if a) the left subtree contains no eligible
* entities and b) no eligible entity has been found yet.
*/
diff --git a/block/blk-core.c b/block/blk-core.c
index 970b9c96..dbecbf4 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -3421,6 +3421,10 @@
*/
void blk_pm_runtime_init(struct request_queue *q, struct device *dev)
{
+ /* not support for RQF_PM and ->rpm_status in blk-mq yet */
+ if (q->mq_ops)
+ return;
+
q->dev = dev;
q->rpm_status = RPM_ACTIVE;
pm_runtime_set_autosuspend_delay(q->dev, -1);
diff --git a/block/blk-mq-cpumap.c b/block/blk-mq-cpumap.c
index 4891f04..9f8cffc 100644
--- a/block/blk-mq-cpumap.c
+++ b/block/blk-mq-cpumap.c
@@ -17,9 +17,9 @@
static int cpu_to_queue_index(unsigned int nr_queues, const int cpu)
{
/*
- * Non online CPU will be mapped to queue index 0.
+ * Non present CPU will be mapped to queue index 0.
*/
- if (!cpu_online(cpu))
+ if (!cpu_present(cpu))
return 0;
return cpu % nr_queues;
}
diff --git a/block/bsg-lib.c b/block/bsg-lib.c
index c4513b2..4752dbc 100644
--- a/block/bsg-lib.c
+++ b/block/bsg-lib.c
@@ -226,8 +226,9 @@
* @job_fn: bsg job handler
* @dd_job_size: size of LLD data needed for each job
*/
-struct request_queue *bsg_setup_queue(struct device *dev, char *name,
- bsg_job_fn *job_fn, int dd_job_size)
+struct request_queue *bsg_setup_queue(struct device *dev, const char *name,
+ bsg_job_fn *job_fn, int dd_job_size,
+ void (*release)(struct device *))
{
struct request_queue *q;
int ret;
@@ -250,7 +251,7 @@
blk_queue_softirq_done(q, bsg_softirq_done);
blk_queue_rq_timeout(q, BLK_DEFAULT_SG_TIMEOUT);
- ret = bsg_register_queue(q, dev, name, NULL);
+ ret = bsg_register_queue(q, dev, name, release);
if (ret) {
printk(KERN_ERR "%s: bsg interface failed to "
"initialize - register queue\n", dev->kobj.name);
diff --git a/certs/Makefile b/certs/Makefile
index 4119bb3..847361c 100644
--- a/certs/Makefile
+++ b/certs/Makefile
@@ -26,7 +26,7 @@
targets += x509_certificate_list
$(obj)/x509_certificate_list: scripts/extract-cert $(SYSTEM_TRUSTED_KEYS_SRCPREFIX)$(SYSTEM_TRUSTED_KEYS_FILENAME) FORCE
$(call if_changed,extract_certs,$(SYSTEM_TRUSTED_KEYS_SRCPREFIX)$(CONFIG_SYSTEM_TRUSTED_KEYS))
-endif
+endif # CONFIG_SYSTEM_TRUSTED_KEYRING
clean-files := x509_certificate_list .x509.list
@@ -87,7 +87,7 @@
@echo >>$@ "keyUsage=digitalSignature"
@echo >>$@ "subjectKeyIdentifier=hash"
@echo >>$@ "authorityKeyIdentifier=keyid"
-endif
+endif # CONFIG_MODULE_SIG_KEY
$(eval $(call config_filename,MODULE_SIG_KEY))
@@ -102,4 +102,4 @@
targets += signing_key.x509
$(obj)/signing_key.x509: scripts/extract-cert $(X509_DEP) FORCE
$(call if_changed,extract_certs,$(MODULE_SIG_KEY_SRCPREFIX)$(CONFIG_MODULE_SIG_KEY))
-endif
+endif # CONFIG_MODULE_SIG
diff --git a/crypto/af_alg.c b/crypto/af_alg.c
index 3556d8e..92a3d54 100644
--- a/crypto/af_alg.c
+++ b/crypto/af_alg.c
@@ -287,7 +287,7 @@
goto unlock;
sock_init_data(newsock, sk2);
- sock_graft(sk2, newsock);
+ security_sock_graft(sk2, newsock);
security_sk_clone(sk, sk2);
err = type->accept(ask->private, sk2);
diff --git a/crypto/authencesn.c b/crypto/authencesn.c
index 6f8f6b8..0cf5fef 100644
--- a/crypto/authencesn.c
+++ b/crypto/authencesn.c
@@ -248,6 +248,9 @@
u8 *ihash = ohash + crypto_ahash_digestsize(auth);
u32 tmp[2];
+ if (!authsize)
+ goto decrypt;
+
/* Move high-order bits of sequence number back. */
scatterwalk_map_and_copy(tmp, dst, 4, 4, 0);
scatterwalk_map_and_copy(tmp + 1, dst, assoclen + cryptlen, 4, 0);
@@ -256,6 +259,8 @@
if (crypto_memneq(ihash, ohash, authsize))
return -EBADMSG;
+decrypt:
+
sg_init_table(areq_ctx->dst, 2);
dst = scatterwalk_ffwd(areq_ctx->dst, dst, assoclen);
diff --git a/drivers/acpi/acpi_apd.c b/drivers/acpi/acpi_apd.c
index fc6c416..d5999eb 100644
--- a/drivers/acpi/acpi_apd.c
+++ b/drivers/acpi/acpi_apd.c
@@ -180,8 +180,8 @@
{ "APMC0D0F", APD_ADDR(xgene_i2c_desc) },
{ "BRCM900D", APD_ADDR(vulcan_spi_desc) },
{ "CAV900D", APD_ADDR(vulcan_spi_desc) },
- { "HISI0A21", APD_ADDR(hip07_i2c_desc) },
- { "HISI0A22", APD_ADDR(hip08_i2c_desc) },
+ { "HISI02A1", APD_ADDR(hip07_i2c_desc) },
+ { "HISI02A2", APD_ADDR(hip08_i2c_desc) },
#endif
{ }
};
diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
index e51a1e9..f88caf5 100644
--- a/drivers/acpi/acpi_lpss.c
+++ b/drivers/acpi/acpi_lpss.c
@@ -85,6 +85,7 @@
};
struct lpss_private_data {
+ struct acpi_device *adev;
void __iomem *mmio_base;
resource_size_t mmio_size;
unsigned int fixed_clk_rate;
@@ -155,6 +156,12 @@
static void byt_pwm_setup(struct lpss_private_data *pdata)
{
+ struct acpi_device *adev = pdata->adev;
+
+ /* Only call pwm_add_table for the first PWM controller */
+ if (!adev->pnp.unique_id || strcmp(adev->pnp.unique_id, "1"))
+ return;
+
if (!acpi_dev_present("INT33FD", NULL, -1))
pwm_add_table(byt_pwm_lookup, ARRAY_SIZE(byt_pwm_lookup));
}
@@ -180,6 +187,12 @@
static void bsw_pwm_setup(struct lpss_private_data *pdata)
{
+ struct acpi_device *adev = pdata->adev;
+
+ /* Only call pwm_add_table for the first PWM controller */
+ if (!adev->pnp.unique_id || strcmp(adev->pnp.unique_id, "1"))
+ return;
+
pwm_add_table(bsw_pwm_lookup, ARRAY_SIZE(bsw_pwm_lookup));
}
@@ -456,6 +469,7 @@
goto err_out;
}
+ pdata->adev = adev;
pdata->dev_desc = dev_desc;
if (dev_desc->setup)
diff --git a/drivers/acpi/acpi_watchdog.c b/drivers/acpi/acpi_watchdog.c
index 8c4e0a1..bf22c29 100644
--- a/drivers/acpi/acpi_watchdog.c
+++ b/drivers/acpi/acpi_watchdog.c
@@ -86,7 +86,12 @@
found = false;
resource_list_for_each_entry(rentry, &resource_list) {
- if (resource_contains(rentry->res, &res)) {
+ if (rentry->res->flags == res.flags &&
+ resource_overlaps(rentry->res, &res)) {
+ if (res.start < rentry->res->start)
+ rentry->res->start = res.start;
+ if (res.end > rentry->res->end)
+ rentry->res->end = res.end;
found = true;
break;
}
diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index d048f72..a3215ee 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -31,6 +31,11 @@
#define IORT_IOMMU_TYPE ((1 << ACPI_IORT_NODE_SMMU) | \
(1 << ACPI_IORT_NODE_SMMU_V3))
+/* Until ACPICA headers cover IORT rev. C */
+#ifndef ACPI_IORT_SMMU_V3_CAVIUM_CN99XX
+#define ACPI_IORT_SMMU_V3_CAVIUM_CN99XX 0x2
+#endif
+
struct iort_its_msi_chip {
struct list_head list;
struct fwnode_handle *fw_node;
@@ -819,6 +824,36 @@
return num_res;
}
+static bool arm_smmu_v3_is_combined_irq(struct acpi_iort_smmu_v3 *smmu)
+{
+ /*
+ * Cavium ThunderX2 implementation doesn't not support unique
+ * irq line. Use single irq line for all the SMMUv3 interrupts.
+ */
+ if (smmu->model != ACPI_IORT_SMMU_V3_CAVIUM_CN99XX)
+ return false;
+
+ /*
+ * ThunderX2 doesn't support MSIs from the SMMU, so we're checking
+ * SPI numbers here.
+ */
+ return smmu->event_gsiv == smmu->pri_gsiv &&
+ smmu->event_gsiv == smmu->gerr_gsiv &&
+ smmu->event_gsiv == smmu->sync_gsiv;
+}
+
+static unsigned long arm_smmu_v3_resource_size(struct acpi_iort_smmu_v3 *smmu)
+{
+ /*
+ * Override the size, for Cavium ThunderX2 implementation
+ * which doesn't support the page 1 SMMU register space.
+ */
+ if (smmu->model == ACPI_IORT_SMMU_V3_CAVIUM_CN99XX)
+ return SZ_64K;
+
+ return SZ_128K;
+}
+
static void __init arm_smmu_v3_init_resources(struct resource *res,
struct acpi_iort_node *node)
{
@@ -829,30 +864,38 @@
smmu = (struct acpi_iort_smmu_v3 *)node->node_data;
res[num_res].start = smmu->base_address;
- res[num_res].end = smmu->base_address + SZ_128K - 1;
+ res[num_res].end = smmu->base_address +
+ arm_smmu_v3_resource_size(smmu) - 1;
res[num_res].flags = IORESOURCE_MEM;
num_res++;
+ if (arm_smmu_v3_is_combined_irq(smmu)) {
+ if (smmu->event_gsiv)
+ acpi_iort_register_irq(smmu->event_gsiv, "combined",
+ ACPI_EDGE_SENSITIVE,
+ &res[num_res++]);
+ } else {
- if (smmu->event_gsiv)
- acpi_iort_register_irq(smmu->event_gsiv, "eventq",
- ACPI_EDGE_SENSITIVE,
- &res[num_res++]);
+ if (smmu->event_gsiv)
+ acpi_iort_register_irq(smmu->event_gsiv, "eventq",
+ ACPI_EDGE_SENSITIVE,
+ &res[num_res++]);
- if (smmu->pri_gsiv)
- acpi_iort_register_irq(smmu->pri_gsiv, "priq",
- ACPI_EDGE_SENSITIVE,
- &res[num_res++]);
+ if (smmu->pri_gsiv)
+ acpi_iort_register_irq(smmu->pri_gsiv, "priq",
+ ACPI_EDGE_SENSITIVE,
+ &res[num_res++]);
- if (smmu->gerr_gsiv)
- acpi_iort_register_irq(smmu->gerr_gsiv, "gerror",
- ACPI_EDGE_SENSITIVE,
- &res[num_res++]);
+ if (smmu->gerr_gsiv)
+ acpi_iort_register_irq(smmu->gerr_gsiv, "gerror",
+ ACPI_EDGE_SENSITIVE,
+ &res[num_res++]);
- if (smmu->sync_gsiv)
- acpi_iort_register_irq(smmu->sync_gsiv, "cmdq-sync",
- ACPI_EDGE_SENSITIVE,
- &res[num_res++]);
+ if (smmu->sync_gsiv)
+ acpi_iort_register_irq(smmu->sync_gsiv, "cmdq-sync",
+ ACPI_EDGE_SENSITIVE,
+ &res[num_res++]);
+ }
}
static bool __init arm_smmu_v3_is_coherent(struct acpi_iort_node *node)
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 854d428..62068a5 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -147,10 +147,14 @@
module_param(ec_storm_threshold, uint, 0644);
MODULE_PARM_DESC(ec_storm_threshold, "Maxim false GPE numbers not considered as GPE storm");
-static bool ec_freeze_events __read_mostly = true;
+static bool ec_freeze_events __read_mostly = false;
module_param(ec_freeze_events, bool, 0644);
MODULE_PARM_DESC(ec_freeze_events, "Disabling event handling during suspend/resume");
+static bool ec_no_wakeup __read_mostly;
+module_param(ec_no_wakeup, bool, 0644);
+MODULE_PARM_DESC(ec_no_wakeup, "Do not wake up from suspend-to-idle");
+
struct acpi_ec_query_handler {
struct list_head node;
acpi_ec_query_func func;
@@ -535,6 +539,14 @@
spin_unlock_irqrestore(&ec->lock, flags);
__acpi_ec_flush_event(ec);
}
+
+void acpi_ec_flush_work(void)
+{
+ if (first_ec)
+ __acpi_ec_flush_event(first_ec);
+
+ flush_scheduled_work();
+}
#endif /* CONFIG_PM_SLEEP */
static bool acpi_ec_guard_event(struct acpi_ec *ec)
@@ -1870,24 +1882,6 @@
}
#ifdef CONFIG_PM_SLEEP
-static int acpi_ec_suspend_noirq(struct device *dev)
-{
- struct acpi_ec *ec =
- acpi_driver_data(to_acpi_device(dev));
-
- acpi_ec_enter_noirq(ec);
- return 0;
-}
-
-static int acpi_ec_resume_noirq(struct device *dev)
-{
- struct acpi_ec *ec =
- acpi_driver_data(to_acpi_device(dev));
-
- acpi_ec_leave_noirq(ec);
- return 0;
-}
-
static int acpi_ec_suspend(struct device *dev)
{
struct acpi_ec *ec =
@@ -1898,6 +1892,32 @@
return 0;
}
+static int acpi_ec_suspend_noirq(struct device *dev)
+{
+ struct acpi_ec *ec = acpi_driver_data(to_acpi_device(dev));
+
+ /*
+ * The SCI handler doesn't run at this point, so the GPE can be
+ * masked at the low level without side effects.
+ */
+ if (ec_no_wakeup && test_bit(EC_FLAGS_STARTED, &ec->flags) &&
+ ec->reference_count >= 1)
+ acpi_set_gpe(NULL, ec->gpe, ACPI_GPE_DISABLE);
+
+ return 0;
+}
+
+static int acpi_ec_resume_noirq(struct device *dev)
+{
+ struct acpi_ec *ec = acpi_driver_data(to_acpi_device(dev));
+
+ if (ec_no_wakeup && test_bit(EC_FLAGS_STARTED, &ec->flags) &&
+ ec->reference_count >= 1)
+ acpi_set_gpe(NULL, ec->gpe, ACPI_GPE_ENABLE);
+
+ return 0;
+}
+
static int acpi_ec_resume(struct device *dev)
{
struct acpi_ec *ec =
diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
index 9531d32..58dd7ab 100644
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h
@@ -193,6 +193,10 @@
void *data);
void acpi_ec_remove_query_handler(struct acpi_ec *ec, u8 query_bit);
+#ifdef CONFIG_PM_SLEEP
+void acpi_ec_flush_work(void);
+#endif
+
/*--------------------------------------------------------------------------
Suspend/Resume
diff --git a/drivers/acpi/irq.c b/drivers/acpi/irq.c
index 830299a..7c352cb 100644
--- a/drivers/acpi/irq.c
+++ b/drivers/acpi/irq.c
@@ -24,7 +24,7 @@
*
* irq location updated with irq value [>0 on success, 0 on failure]
*
- * Returns: linux IRQ number on success (>0)
+ * Returns: 0 on success
* -EINVAL on failure
*/
int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
@@ -37,7 +37,7 @@
* *irq == 0 means no mapping, that should
* be reported as a failure
*/
- return (*irq > 0) ? *irq : -EINVAL;
+ return (*irq > 0) ? 0 : -EINVAL;
}
EXPORT_SYMBOL_GPL(acpi_gsi_to_irq);
diff --git a/drivers/acpi/nfit/core.c b/drivers/acpi/nfit/core.c
index b75b734..19182d0 100644
--- a/drivers/acpi/nfit/core.c
+++ b/drivers/acpi/nfit/core.c
@@ -3160,6 +3160,8 @@
static __init int nfit_init(void)
{
+ int ret;
+
BUILD_BUG_ON(sizeof(struct acpi_table_nfit) != 40);
BUILD_BUG_ON(sizeof(struct acpi_nfit_system_address) != 56);
BUILD_BUG_ON(sizeof(struct acpi_nfit_memory_map) != 48);
@@ -3187,8 +3189,14 @@
return -ENOMEM;
nfit_mce_register();
+ ret = acpi_bus_register_driver(&acpi_nfit_driver);
+ if (ret) {
+ nfit_mce_unregister();
+ destroy_workqueue(nfit_wq);
+ }
- return acpi_bus_register_driver(&acpi_nfit_driver);
+ return ret;
+
}
static __exit void nfit_exit(void)
diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c
index edb0c79..917f1cc 100644
--- a/drivers/acpi/numa.c
+++ b/drivers/acpi/numa.c
@@ -443,7 +443,7 @@
* So go over all cpu entries in SRAT to get apicid to node mapping.
*/
- /* SRAT: Static Resource Affinity Table */
+ /* SRAT: System Resource Affinity Table */
if (!acpi_table_parse(ACPI_SIG_SRAT, acpi_parse_srat)) {
struct acpi_subtable_proc srat_proc[3];
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index be17664..fa8243c 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -777,11 +777,11 @@
/*
* Process all pending events in case there are any wakeup ones.
*
- * The EC driver uses the system workqueue, so that one needs to be
- * flushed too.
+ * The EC driver uses the system workqueue and an additional special
+ * one, so those need to be flushed too.
*/
+ acpi_ec_flush_work();
acpi_os_wait_events_complete();
- flush_scheduled_work();
s2idle_wakeup = false;
}
diff --git a/drivers/acpi/x86/utils.c b/drivers/acpi/x86/utils.c
index bd86b80..b4fbb99 100644
--- a/drivers/acpi/x86/utils.c
+++ b/drivers/acpi/x86/utils.c
@@ -12,6 +12,7 @@
*/
#include <linux/acpi.h>
+#include <linux/dmi.h>
#include <asm/cpu_device_id.h>
#include <asm/intel-family.h>
#include "../internal.h"
@@ -20,6 +21,10 @@
* Some ACPI devices are hidden (status == 0x0) in recent BIOS-es because
* some recent Windows drivers bind to one device but poke at multiple
* devices at the same time, so the others get hidden.
+ *
+ * Some BIOS-es (temporarily) hide specific APCI devices to work around Windows
+ * driver bugs. We use DMI matching to match known cases of this.
+ *
* We work around this by always reporting ACPI_STA_DEFAULT for these
* devices. Note this MUST only be done for devices where this is safe.
*
@@ -31,14 +36,16 @@
struct always_present_id {
struct acpi_device_id hid[2];
struct x86_cpu_id cpu_ids[2];
+ struct dmi_system_id dmi_ids[2]; /* Optional */
const char *uid;
};
#define ICPU(model) { X86_VENDOR_INTEL, 6, model, X86_FEATURE_ANY, }
-#define ENTRY(hid, uid, cpu_models) { \
+#define ENTRY(hid, uid, cpu_models, dmi...) { \
{ { hid, }, {} }, \
{ cpu_models, {} }, \
+ { { .matches = dmi }, {} }, \
uid, \
}
@@ -47,13 +54,35 @@
* Bay / Cherry Trail PWM directly poked by GPU driver in win10,
* but Linux uses a separate PWM driver, harmless if not used.
*/
- ENTRY("80860F09", "1", ICPU(INTEL_FAM6_ATOM_SILVERMONT1)),
- ENTRY("80862288", "1", ICPU(INTEL_FAM6_ATOM_AIRMONT)),
+ ENTRY("80860F09", "1", ICPU(INTEL_FAM6_ATOM_SILVERMONT1), {}),
+ ENTRY("80862288", "1", ICPU(INTEL_FAM6_ATOM_AIRMONT), {}),
/*
* The INT0002 device is necessary to clear wakeup interrupt sources
* on Cherry Trail devices, without it we get nobody cared IRQ msgs.
*/
- ENTRY("INT0002", "1", ICPU(INTEL_FAM6_ATOM_AIRMONT)),
+ ENTRY("INT0002", "1", ICPU(INTEL_FAM6_ATOM_AIRMONT), {}),
+ /*
+ * On the Dell Venue 11 Pro 7130 the DSDT hides the touchscreen ACPI
+ * device until a certain time after _SB.PCI0.GFX0.LCD.LCD1._ON gets
+ * called has passed *and* _STA has been called at least 3 times since.
+ */
+ ENTRY("SYNA7500", "1", ICPU(INTEL_FAM6_HASWELL_ULT), {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Venue 11 Pro 7130"),
+ }),
+ /*
+ * The GPD win BIOS dated 20170320 has disabled the accelerometer, the
+ * drivers sometimes cause crashes under Windows and this is how the
+ * manufacturer has solved this :| Note that the the DMI data is less
+ * generic then it seems, a board_vendor of "AMI Corporation" is quite
+ * rare and a board_name of "Default String" also is rare.
+ */
+ ENTRY("KIOX000A", "1", ICPU(INTEL_FAM6_ATOM_AIRMONT), {
+ DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
+ DMI_MATCH(DMI_BOARD_NAME, "Default string"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Default string"),
+ DMI_MATCH(DMI_BIOS_DATE, "03/20/2017")
+ }),
};
bool acpi_device_always_present(struct acpi_device *adev)
@@ -76,6 +105,10 @@
if (!x86_match_cpu(always_present_ids[i].cpu_ids))
continue;
+ if (always_present_ids[i].dmi_ids[0].matches[0].slot &&
+ !dmi_check_system(always_present_ids[i].dmi_ids))
+ continue;
+
if (old_status != ACPI_STA_DEFAULT) /* Log only once */
dev_info(&adev->dev,
"Device [%s] is in always present list\n",
diff --git a/drivers/android/binder.c b/drivers/android/binder.c
index aae4d8d..f7665c3 100644
--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@@ -2200,8 +2200,12 @@
list_add_tail(&t->work.entry, target_list);
tcomplete->type = BINDER_WORK_TRANSACTION_COMPLETE;
list_add_tail(&tcomplete->entry, &thread->todo);
- if (target_wait)
- wake_up_interruptible(target_wait);
+ if (target_wait) {
+ if (reply || !(t->flags & TF_ONE_WAY))
+ wake_up_interruptible_sync(target_wait);
+ else
+ wake_up_interruptible(target_wait);
+ }
return;
err_translate_failed:
@@ -3247,10 +3251,6 @@
/*pr_info("binder_ioctl: %d:%d %x %lx\n",
proc->pid, current->pid, cmd, arg);*/
- if (unlikely(current->mm != proc->vma_vm_mm)) {
- pr_err("current mm mismatch proc mm\n");
- return -EINVAL;
- }
trace_binder_ioctl(cmd, arg);
ret = wait_event_interruptible(binder_user_error_wait, binder_stop_on_user_error < 2);
@@ -3464,9 +3464,8 @@
proc = kzalloc(sizeof(*proc), GFP_KERNEL);
if (proc == NULL)
return -ENOMEM;
- get_task_struct(current);
- proc->tsk = current;
- proc->vma_vm_mm = current->mm;
+ get_task_struct(current->group_leader);
+ proc->tsk = current->group_leader;
INIT_LIST_HEAD(&proc->todo);
init_waitqueue_head(&proc->wait);
proc->default_priority = task_nice(current);
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 948fc86..363fc533 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -215,7 +215,7 @@
config SATA_GEMINI
tristate "Gemini SATA bridge support"
- depends on PATA_FTIDE010
+ depends on ARCH_GEMINI || COMPILE_TEST
default ARCH_GEMINI
help
This enabled support for the FTIDE010 to SATA bridge
@@ -613,7 +613,7 @@
tristate "Faraday Technology FTIDE010 PATA support"
depends on OF
depends on ARM
- default ARCH_GEMINI
+ depends on SATA_GEMINI
help
This option enables support for the Faraday FTIDE010
PATA controller found in the Cortina Gemini SoCs.
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 8453f9a..fa7dd43 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2083,7 +2083,7 @@
retry:
ata_tf_init(dev, &tf);
if (dev->dma_mode && ata_id_has_read_log_dma_ext(dev->id) &&
- !(dev->horkage & ATA_HORKAGE_NO_NCQ_LOG)) {
+ !(dev->horkage & ATA_HORKAGE_NO_DMA_LOG)) {
tf.command = ATA_CMD_READ_LOG_DMA_EXT;
tf.protocol = ATA_PROT_DMA;
dma = true;
@@ -2102,8 +2102,8 @@
buf, sectors * ATA_SECT_SIZE, 0);
if (err_mask && dma) {
- dev->horkage |= ATA_HORKAGE_NO_NCQ_LOG;
- ata_dev_warn(dev, "READ LOG DMA EXT failed, trying unqueued\n");
+ dev->horkage |= ATA_HORKAGE_NO_DMA_LOG;
+ ata_dev_warn(dev, "READ LOG DMA EXT failed, trying PIO\n");
goto retry;
}
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index b70bcf6..3dbd055 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1434,7 +1434,7 @@
/**
* ata_eh_done - EH action complete
-* @ap: target ATA port
+ * @link: ATA link for which EH actions are complete
* @dev: target ATA dev for per-dev action (can be NULL)
* @action: action just completed
*
@@ -1576,7 +1576,7 @@
/**
* ata_eh_request_sense - perform REQUEST_SENSE_DATA_EXT
- * @dev: device to perform REQUEST_SENSE_SENSE_DATA_EXT to
+ * @qc: qc to perform REQUEST_SENSE_SENSE_DATA_EXT to
* @cmd: scsi command for which the sense code should be set
*
* Perform REQUEST_SENSE_DATA_EXT after the device reported CHECK
@@ -4175,7 +4175,6 @@
struct ata_link *link;
struct ata_device *dev;
unsigned long flags;
- int rc = 0;
/* are we resuming? */
spin_lock_irqsave(ap->lock, flags);
@@ -4202,7 +4201,7 @@
ata_acpi_set_state(ap, ap->pm_mesg);
if (ap->ops->port_resume)
- rc = ap->ops->port_resume(ap);
+ ap->ops->port_resume(ap);
/* tell ACPI that we're resuming */
ata_acpi_on_resume(ap);
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index d462c5a..44ba292 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3030,10 +3030,12 @@
static struct ata_device *ata_find_dev(struct ata_port *ap, int devno)
{
if (!sata_pmp_attached(ap)) {
- if (likely(devno < ata_link_max_devices(&ap->link)))
+ if (likely(devno >= 0 &&
+ devno < ata_link_max_devices(&ap->link)))
return &ap->link.device[devno];
} else {
- if (likely(devno < ap->nr_pmp_links))
+ if (likely(devno >= 0 &&
+ devno < ap->nr_pmp_links))
return &ap->pmp_link[devno].device[0];
}
diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c
index ee98447..537d118 100644
--- a/drivers/ata/sata_rcar.c
+++ b/drivers/ata/sata_rcar.c
@@ -858,6 +858,14 @@
.compatible = "renesas,sata-r8a7795",
.data = (void *)RCAR_GEN2_SATA
},
+ {
+ .compatible = "renesas,rcar-gen2-sata",
+ .data = (void *)RCAR_GEN2_SATA
+ },
+ {
+ .compatible = "renesas,rcar-gen3-sata",
+ .data = (void *)RCAR_GEN2_SATA
+ },
{ },
};
MODULE_DEVICE_TABLE(of, sata_rcar_match);
diff --git a/drivers/atm/zatm.c b/drivers/atm/zatm.c
index 292dec1..07bdd51 100644
--- a/drivers/atm/zatm.c
+++ b/drivers/atm/zatm.c
@@ -1613,7 +1613,7 @@
ret = dma_set_mask_and_coherent(&pci_dev->dev, DMA_BIT_MASK(32));
if (ret < 0)
- goto out_disable;
+ goto out_release;
zatm_dev->pci_dev = pci_dev;
dev->dev_data = zatm_dev;
diff --git a/drivers/base/dma-coherent.c b/drivers/base/dma-coherent.c
index 2ae24c2..1c152ae 100644
--- a/drivers/base/dma-coherent.c
+++ b/drivers/base/dma-coherent.c
@@ -25,7 +25,7 @@
{
if (dev && dev->dma_mem)
return dev->dma_mem;
- return dma_coherent_default_memory;
+ return NULL;
}
static inline dma_addr_t dma_get_device_base(struct device *dev,
@@ -165,9 +165,45 @@
}
EXPORT_SYMBOL(dma_mark_declared_memory_occupied);
+static void *__dma_alloc_from_coherent(struct dma_coherent_mem *mem,
+ ssize_t size, dma_addr_t *dma_handle)
+{
+ int order = get_order(size);
+ unsigned long flags;
+ int pageno;
+ int dma_memory_map;
+ void *ret;
+
+ spin_lock_irqsave(&mem->spinlock, flags);
+
+ if (unlikely(size > (mem->size << PAGE_SHIFT)))
+ goto err;
+
+ pageno = bitmap_find_free_region(mem->bitmap, mem->size, order);
+ if (unlikely(pageno < 0))
+ goto err;
+
+ /*
+ * Memory was found in the coherent area.
+ */
+ *dma_handle = mem->device_base + (pageno << PAGE_SHIFT);
+ ret = mem->virt_base + (pageno << PAGE_SHIFT);
+ dma_memory_map = (mem->flags & DMA_MEMORY_MAP);
+ spin_unlock_irqrestore(&mem->spinlock, flags);
+ if (dma_memory_map)
+ memset(ret, 0, size);
+ else
+ memset_io(ret, 0, size);
+
+ return ret;
+
+err:
+ spin_unlock_irqrestore(&mem->spinlock, flags);
+ return NULL;
+}
+
/**
- * dma_alloc_from_coherent() - try to allocate memory from the per-device coherent area
- *
+ * dma_alloc_from_dev_coherent() - allocate memory from device coherent pool
* @dev: device from which we allocate memory
* @size: size of requested memory area
* @dma_handle: This will be filled with the correct dma handle
@@ -180,44 +216,18 @@
* Returns 0 if dma_alloc_coherent should continue with allocating from
* generic memory areas, or !0 if dma_alloc_coherent should return @ret.
*/
-int dma_alloc_from_coherent(struct device *dev, ssize_t size,
- dma_addr_t *dma_handle, void **ret)
+int dma_alloc_from_dev_coherent(struct device *dev, ssize_t size,
+ dma_addr_t *dma_handle, void **ret)
{
struct dma_coherent_mem *mem = dev_get_coherent_memory(dev);
- int order = get_order(size);
- unsigned long flags;
- int pageno;
- int dma_memory_map;
if (!mem)
return 0;
- *ret = NULL;
- spin_lock_irqsave(&mem->spinlock, flags);
+ *ret = __dma_alloc_from_coherent(mem, size, dma_handle);
+ if (*ret)
+ return 1;
- if (unlikely(size > (mem->size << PAGE_SHIFT)))
- goto err;
-
- pageno = bitmap_find_free_region(mem->bitmap, mem->size, order);
- if (unlikely(pageno < 0))
- goto err;
-
- /*
- * Memory was found in the per-device area.
- */
- *dma_handle = dma_get_device_base(dev, mem) + (pageno << PAGE_SHIFT);
- *ret = mem->virt_base + (pageno << PAGE_SHIFT);
- dma_memory_map = (mem->flags & DMA_MEMORY_MAP);
- spin_unlock_irqrestore(&mem->spinlock, flags);
- if (dma_memory_map)
- memset(*ret, 0, size);
- else
- memset_io(*ret, 0, size);
-
- return 1;
-
-err:
- spin_unlock_irqrestore(&mem->spinlock, flags);
/*
* In the case where the allocation can not be satisfied from the
* per-device area, try to fall back to generic memory if the
@@ -225,25 +235,20 @@
*/
return mem->flags & DMA_MEMORY_EXCLUSIVE;
}
-EXPORT_SYMBOL(dma_alloc_from_coherent);
+EXPORT_SYMBOL(dma_alloc_from_dev_coherent);
-/**
- * dma_release_from_coherent() - try to free the memory allocated from per-device coherent memory pool
- * @dev: device from which the memory was allocated
- * @order: the order of pages allocated
- * @vaddr: virtual address of allocated pages
- *
- * This checks whether the memory was allocated from the per-device
- * coherent memory pool and if so, releases that memory.
- *
- * Returns 1 if we correctly released the memory, or 0 if
- * dma_release_coherent() should proceed with releasing memory from
- * generic pools.
- */
-int dma_release_from_coherent(struct device *dev, int order, void *vaddr)
+void *dma_alloc_from_global_coherent(ssize_t size, dma_addr_t *dma_handle)
{
- struct dma_coherent_mem *mem = dev_get_coherent_memory(dev);
+ if (!dma_coherent_default_memory)
+ return NULL;
+ return __dma_alloc_from_coherent(dma_coherent_default_memory, size,
+ dma_handle);
+}
+
+static int __dma_release_from_coherent(struct dma_coherent_mem *mem,
+ int order, void *vaddr)
+{
if (mem && vaddr >= mem->virt_base && vaddr <
(mem->virt_base + (mem->size << PAGE_SHIFT))) {
int page = (vaddr - mem->virt_base) >> PAGE_SHIFT;
@@ -256,28 +261,39 @@
}
return 0;
}
-EXPORT_SYMBOL(dma_release_from_coherent);
/**
- * dma_mmap_from_coherent() - try to mmap the memory allocated from
- * per-device coherent memory pool to userspace
+ * dma_release_from_dev_coherent() - free memory to device coherent memory pool
* @dev: device from which the memory was allocated
- * @vma: vm_area for the userspace memory
- * @vaddr: cpu address returned by dma_alloc_from_coherent
- * @size: size of the memory buffer allocated by dma_alloc_from_coherent
- * @ret: result from remap_pfn_range()
+ * @order: the order of pages allocated
+ * @vaddr: virtual address of allocated pages
*
* This checks whether the memory was allocated from the per-device
- * coherent memory pool and if so, maps that memory to the provided vma.
+ * coherent memory pool and if so, releases that memory.
*
- * Returns 1 if we correctly mapped the memory, or 0 if the caller should
- * proceed with mapping memory from generic pools.
+ * Returns 1 if we correctly released the memory, or 0 if the caller should
+ * proceed with releasing memory from generic pools.
*/
-int dma_mmap_from_coherent(struct device *dev, struct vm_area_struct *vma,
- void *vaddr, size_t size, int *ret)
+int dma_release_from_dev_coherent(struct device *dev, int order, void *vaddr)
{
struct dma_coherent_mem *mem = dev_get_coherent_memory(dev);
+ return __dma_release_from_coherent(mem, order, vaddr);
+}
+EXPORT_SYMBOL(dma_release_from_dev_coherent);
+
+int dma_release_from_global_coherent(int order, void *vaddr)
+{
+ if (!dma_coherent_default_memory)
+ return 0;
+
+ return __dma_release_from_coherent(dma_coherent_default_memory, order,
+ vaddr);
+}
+
+static int __dma_mmap_from_coherent(struct dma_coherent_mem *mem,
+ struct vm_area_struct *vma, void *vaddr, size_t size, int *ret)
+{
if (mem && vaddr >= mem->virt_base && vaddr + size <=
(mem->virt_base + (mem->size << PAGE_SHIFT))) {
unsigned long off = vma->vm_pgoff;
@@ -296,7 +312,39 @@
}
return 0;
}
-EXPORT_SYMBOL(dma_mmap_from_coherent);
+
+/**
+ * dma_mmap_from_dev_coherent() - mmap memory from the device coherent pool
+ * @dev: device from which the memory was allocated
+ * @vma: vm_area for the userspace memory
+ * @vaddr: cpu address returned by dma_alloc_from_dev_coherent
+ * @size: size of the memory buffer allocated
+ * @ret: result from remap_pfn_range()
+ *
+ * This checks whether the memory was allocated from the per-device
+ * coherent memory pool and if so, maps that memory to the provided vma.
+ *
+ * Returns 1 if we correctly mapped the memory, or 0 if the caller should
+ * proceed with mapping memory from generic pools.
+ */
+int dma_mmap_from_dev_coherent(struct device *dev, struct vm_area_struct *vma,
+ void *vaddr, size_t size, int *ret)
+{
+ struct dma_coherent_mem *mem = dev_get_coherent_memory(dev);
+
+ return __dma_mmap_from_coherent(mem, vma, vaddr, size, ret);
+}
+EXPORT_SYMBOL(dma_mmap_from_dev_coherent);
+
+int dma_mmap_from_global_coherent(struct vm_area_struct *vma, void *vaddr,
+ size_t size, int *ret)
+{
+ if (!dma_coherent_default_memory)
+ return 0;
+
+ return __dma_mmap_from_coherent(dma_coherent_default_memory, vma,
+ vaddr, size, ret);
+}
/*
* Support for reserved memory regions defined in device tree
diff --git a/drivers/base/dma-mapping.c b/drivers/base/dma-mapping.c
index 5096755..b555ff9 100644
--- a/drivers/base/dma-mapping.c
+++ b/drivers/base/dma-mapping.c
@@ -235,7 +235,7 @@
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
- if (dma_mmap_from_coherent(dev, vma, cpu_addr, size, &ret))
+ if (dma_mmap_from_dev_coherent(dev, vma, cpu_addr, size, &ret))
return ret;
if (off < count && user_count <= (count - off)) {
diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
index 3b8210e..60303aa 100644
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -1222,8 +1222,6 @@
spin_unlock_irq(&dev->power.lock);
- dev_pm_domain_set(dev, &genpd->domain);
-
return gpd_data;
err_free:
@@ -1237,8 +1235,6 @@
static void genpd_free_dev_data(struct device *dev,
struct generic_pm_domain_data *gpd_data)
{
- dev_pm_domain_set(dev, NULL);
-
spin_lock_irq(&dev->power.lock);
dev->power.subsys_data->domain_data = NULL;
@@ -1275,6 +1271,8 @@
if (ret)
goto out;
+ dev_pm_domain_set(dev, &genpd->domain);
+
genpd->device_count++;
genpd->max_off_time_changed = true;
@@ -1336,6 +1334,8 @@
if (genpd->detach_dev)
genpd->detach_dev(genpd, dev);
+ dev_pm_domain_set(dev, NULL);
+
list_del_init(&pdd->list_node);
genpd_unlock(genpd);
diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c
index 185a525..156ab57 100644
--- a/drivers/base/power/sysfs.c
+++ b/drivers/base/power/sysfs.c
@@ -272,6 +272,8 @@
value = PM_QOS_LATENCY_TOLERANCE_NO_CONSTRAINT;
else if (!strcmp(buf, "any") || !strcmp(buf, "any\n"))
value = PM_QOS_LATENCY_ANY;
+ else
+ return -EINVAL;
}
ret = dev_pm_qos_update_user_latency_tolerance(dev, value);
return ret < 0 ? ret : n;
diff --git a/drivers/base/property.c b/drivers/base/property.c
index 692007e..edf02c1 100644
--- a/drivers/base/property.c
+++ b/drivers/base/property.c
@@ -253,10 +253,10 @@
{
bool ret;
- ret = fwnode_call_int_op(fwnode, property_present, propname);
+ ret = fwnode_call_bool_op(fwnode, property_present, propname);
if (ret == false && !IS_ERR_OR_NULL(fwnode) &&
!IS_ERR_OR_NULL(fwnode->secondary))
- ret = fwnode_call_int_op(fwnode->secondary, property_present,
+ ret = fwnode_call_bool_op(fwnode->secondary, property_present,
propname);
return ret;
}
@@ -1027,7 +1027,7 @@
*/
bool fwnode_device_is_available(struct fwnode_handle *fwnode)
{
- return fwnode_call_int_op(fwnode, device_is_available);
+ return fwnode_call_bool_op(fwnode, device_is_available);
}
EXPORT_SYMBOL_GPL(fwnode_device_is_available);
diff --git a/drivers/base/regmap/regmap-w1.c b/drivers/base/regmap/regmap-w1.c
index 5f04e7b..e6c64b0 100644
--- a/drivers/base/regmap/regmap-w1.c
+++ b/drivers/base/regmap/regmap-w1.c
@@ -1,7 +1,7 @@
/*
* Register map access API - W1 (1-Wire) support
*
- * Copyright (C) 2017 OAO Radioavionica
+ * Copyright (c) 2017 Radioavionica Corporation
* Author: Alex A. Mihaylov <minimumlaw@rambler.ru>
*
* This program is free software; you can redistribute it and/or modify
@@ -11,7 +11,7 @@
#include <linux/regmap.h>
#include <linux/module.h>
-#include "../../w1/w1.h"
+#include <linux/w1.h>
#include "internal.h"
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 8ddc982..898e486 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -111,33 +111,6 @@
source "drivers/block/zram/Kconfig"
-config BLK_CPQ_CISS_DA
- tristate "Compaq Smart Array 5xxx support"
- depends on PCI
- select CHECK_SIGNATURE
- select BLK_SCSI_REQUEST
- help
- This is the driver for Compaq Smart Array 5xxx controllers.
- Everyone using these boards should say Y here.
- See <file:Documentation/blockdev/cciss.txt> for the current list of
- boards supported by this driver, and for further information
- on the use of this driver.
-
-config CISS_SCSI_TAPE
- bool "SCSI tape drive support for Smart Array 5xxx"
- depends on BLK_CPQ_CISS_DA && PROC_FS
- depends on SCSI=y || SCSI=BLK_CPQ_CISS_DA
- help
- When enabled (Y), this option allows SCSI tape drives and SCSI medium
- changers (tape robots) to be accessed via a Compaq 5xxx array
- controller. (See <file:Documentation/blockdev/cciss.txt> for more details.)
-
- "SCSI support" and "SCSI tape support" must also be enabled for this
- option to work.
-
- When this option is disabled (N), the SCSI portion of the driver
- is not compiled.
-
config BLK_DEV_DAC960
tristate "Mylex DAC960/DAC1100 PCI RAID Controller support"
depends on PCI
diff --git a/drivers/block/Makefile b/drivers/block/Makefile
index ec8c368..1f456d8 100644
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -15,7 +15,6 @@
obj-$(CONFIG_AMIGA_Z2RAM) += z2ram.o
obj-$(CONFIG_BLK_DEV_RAM) += brd.o
obj-$(CONFIG_BLK_DEV_LOOP) += loop.o
-obj-$(CONFIG_BLK_CPQ_CISS_DA) += cciss.o
obj-$(CONFIG_BLK_DEV_DAC960) += DAC960.o
obj-$(CONFIG_XILINX_SYSACE) += xsysace.o
obj-$(CONFIG_CDROM_PKTCDVD) += pktcdvd.o
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
deleted file mode 100644
index 678af94..0000000
--- a/drivers/block/cciss.c
+++ /dev/null
@@ -1,5415 +0,0 @@
-/*
- * Disk Array driver for HP Smart Array controllers.
- * (C) Copyright 2000, 2007 Hewlett-Packard Development Company, L.P.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
- * 02111-1307, USA.
- *
- * Questions/Comments/Bugfixes to iss_storagedev@hp.com
- *
- */
-
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/pci-aspm.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/major.h>
-#include <linux/fs.h>
-#include <linux/bio.h>
-#include <linux/blkpg.h>
-#include <linux/timer.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/init.h>
-#include <linux/jiffies.h>
-#include <linux/hdreg.h>
-#include <linux/spinlock.h>
-#include <linux/compat.h>
-#include <linux/mutex.h>
-#include <linux/bitmap.h>
-#include <linux/io.h>
-#include <linux/uaccess.h>
-
-#include <linux/dma-mapping.h>
-#include <linux/blkdev.h>
-#include <linux/genhd.h>
-#include <linux/completion.h>
-#include <scsi/scsi.h>
-#include <scsi/sg.h>
-#include <scsi/scsi_ioctl.h>
-#include <scsi/scsi_request.h>
-#include <linux/cdrom.h>
-#include <linux/scatterlist.h>
-#include <linux/kthread.h>
-
-#define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin))
-#define DRIVER_NAME "HP CISS Driver (v 3.6.26)"
-#define DRIVER_VERSION CCISS_DRIVER_VERSION(3, 6, 26)
-
-/* Embedded module documentation macros - see modules.h */
-MODULE_AUTHOR("Hewlett-Packard Company");
-MODULE_DESCRIPTION("Driver for HP Smart Array Controllers");
-MODULE_SUPPORTED_DEVICE("HP Smart Array Controllers");
-MODULE_VERSION("3.6.26");
-MODULE_LICENSE("GPL");
-static int cciss_tape_cmds = 6;
-module_param(cciss_tape_cmds, int, 0644);
-MODULE_PARM_DESC(cciss_tape_cmds,
- "number of commands to allocate for tape devices (default: 6)");
-static int cciss_simple_mode;
-module_param(cciss_simple_mode, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(cciss_simple_mode,
- "Use 'simple mode' rather than 'performant mode'");
-
-static int cciss_allow_hpsa;
-module_param(cciss_allow_hpsa, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(cciss_allow_hpsa,
- "Prevent cciss driver from accessing hardware known to be "
- " supported by the hpsa driver");
-
-static DEFINE_MUTEX(cciss_mutex);
-static struct proc_dir_entry *proc_cciss;
-
-#include "cciss_cmd.h"
-#include "cciss.h"
-#include <linux/cciss_ioctl.h>
-
-/* define the PCI info for the cards we can control */
-static const struct pci_device_id cciss_pci_device_id[] = {
- {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISS, 0x0E11, 0x4070},
- {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSB, 0x0E11, 0x4080},
- {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSB, 0x0E11, 0x4082},
- {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSB, 0x0E11, 0x4083},
- {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, 0x0E11, 0x4091},
- {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, 0x0E11, 0x409A},
- {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, 0x0E11, 0x409B},
- {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, 0x0E11, 0x409C},
- {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, 0x0E11, 0x409D},
- {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSA, 0x103C, 0x3225},
- {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3223},
- {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3234},
- {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3235},
- {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3211},
- {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3212},
- {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3213},
- {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3214},
- {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3215},
- {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3237},
- {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x323D},
- {0,}
-};
-
-MODULE_DEVICE_TABLE(pci, cciss_pci_device_id);
-
-/* board_id = Subsystem Device ID & Vendor ID
- * product = Marketing Name for the board
- * access = Address of the struct of function pointers
- */
-static struct board_type products[] = {
- {0x40700E11, "Smart Array 5300", &SA5_access},
- {0x40800E11, "Smart Array 5i", &SA5B_access},
- {0x40820E11, "Smart Array 532", &SA5B_access},
- {0x40830E11, "Smart Array 5312", &SA5B_access},
- {0x409A0E11, "Smart Array 641", &SA5_access},
- {0x409B0E11, "Smart Array 642", &SA5_access},
- {0x409C0E11, "Smart Array 6400", &SA5_access},
- {0x409D0E11, "Smart Array 6400 EM", &SA5_access},
- {0x40910E11, "Smart Array 6i", &SA5_access},
- {0x3225103C, "Smart Array P600", &SA5_access},
- {0x3223103C, "Smart Array P800", &SA5_access},
- {0x3234103C, "Smart Array P400", &SA5_access},
- {0x3235103C, "Smart Array P400i", &SA5_access},
- {0x3211103C, "Smart Array E200i", &SA5_access},
- {0x3212103C, "Smart Array E200", &SA5_access},
- {0x3213103C, "Smart Array E200i", &SA5_access},
- {0x3214103C, "Smart Array E200i", &SA5_access},
- {0x3215103C, "Smart Array E200i", &SA5_access},
- {0x3237103C, "Smart Array E500", &SA5_access},
- {0x323D103C, "Smart Array P700m", &SA5_access},
-};
-
-/* How long to wait (in milliseconds) for board to go into simple mode */
-#define MAX_CONFIG_WAIT 30000
-#define MAX_IOCTL_CONFIG_WAIT 1000
-
-/*define how many times we will try a command because of bus resets */
-#define MAX_CMD_RETRIES 3
-
-#define MAX_CTLR 32
-
-/* Originally cciss driver only supports 8 major numbers */
-#define MAX_CTLR_ORIG 8
-
-static ctlr_info_t *hba[MAX_CTLR];
-
-static struct task_struct *cciss_scan_thread;
-static DEFINE_MUTEX(scan_mutex);
-static LIST_HEAD(scan_q);
-
-static void do_cciss_request(struct request_queue *q);
-static irqreturn_t do_cciss_intx(int irq, void *dev_id);
-static irqreturn_t do_cciss_msix_intr(int irq, void *dev_id);
-static int cciss_open(struct block_device *bdev, fmode_t mode);
-static int cciss_unlocked_open(struct block_device *bdev, fmode_t mode);
-static void cciss_release(struct gendisk *disk, fmode_t mode);
-static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
- unsigned int cmd, unsigned long arg);
-static int cciss_getgeo(struct block_device *bdev, struct hd_geometry *geo);
-
-static int cciss_revalidate(struct gendisk *disk);
-static int rebuild_lun_table(ctlr_info_t *h, int first_time, int via_ioctl);
-static int deregister_disk(ctlr_info_t *h, int drv_index,
- int clear_all, int via_ioctl);
-
-static void cciss_read_capacity(ctlr_info_t *h, int logvol,
- sector_t *total_size, unsigned int *block_size);
-static void cciss_read_capacity_16(ctlr_info_t *h, int logvol,
- sector_t *total_size, unsigned int *block_size);
-static void cciss_geometry_inquiry(ctlr_info_t *h, int logvol,
- sector_t total_size,
- unsigned int block_size, InquiryData_struct *inq_buff,
- drive_info_struct *drv);
-static void cciss_interrupt_mode(ctlr_info_t *);
-static int cciss_enter_simple_mode(struct ctlr_info *h);
-static void start_io(ctlr_info_t *h);
-static int sendcmd_withirq(ctlr_info_t *h, __u8 cmd, void *buff, size_t size,
- __u8 page_code, unsigned char scsi3addr[],
- int cmd_type);
-static int sendcmd_withirq_core(ctlr_info_t *h, CommandList_struct *c,
- int attempt_retry);
-static int process_sendcmd_error(ctlr_info_t *h, CommandList_struct *c);
-
-static int add_to_scan_list(struct ctlr_info *h);
-static int scan_thread(void *data);
-static int check_for_unit_attention(ctlr_info_t *h, CommandList_struct *c);
-static void cciss_hba_release(struct device *dev);
-static void cciss_device_release(struct device *dev);
-static void cciss_free_gendisk(ctlr_info_t *h, int drv_index);
-static void cciss_free_drive_info(ctlr_info_t *h, int drv_index);
-static inline u32 next_command(ctlr_info_t *h);
-static int cciss_find_cfg_addrs(struct pci_dev *pdev, void __iomem *vaddr,
- u32 *cfg_base_addr, u64 *cfg_base_addr_index,
- u64 *cfg_offset);
-static int cciss_pci_find_memory_BAR(struct pci_dev *pdev,
- unsigned long *memory_bar);
-static inline u32 cciss_tag_discard_error_bits(ctlr_info_t *h, u32 tag);
-static int write_driver_ver_to_cfgtable(CfgTable_struct __iomem *cfgtable);
-
-/* performant mode helper functions */
-static void calc_bucket_map(int *bucket, int num_buckets, int nsgs,
- int *bucket_map);
-static void cciss_put_controller_into_performant_mode(ctlr_info_t *h);
-
-#ifdef CONFIG_PROC_FS
-static void cciss_procinit(ctlr_info_t *h);
-#else
-static void cciss_procinit(ctlr_info_t *h)
-{
-}
-#endif /* CONFIG_PROC_FS */
-
-#ifdef CONFIG_COMPAT
-static int cciss_compat_ioctl(struct block_device *, fmode_t,
- unsigned, unsigned long);
-#endif
-
-static const struct block_device_operations cciss_fops = {
- .owner = THIS_MODULE,
- .open = cciss_unlocked_open,
- .release = cciss_release,
- .ioctl = cciss_ioctl,
- .getgeo = cciss_getgeo,
-#ifdef CONFIG_COMPAT
- .compat_ioctl = cciss_compat_ioctl,
-#endif
- .revalidate_disk = cciss_revalidate,
-};
-
-/* set_performant_mode: Modify the tag for cciss performant
- * set bit 0 for pull model, bits 3-1 for block fetch
- * register number
- */
-static void set_performant_mode(ctlr_info_t *h, CommandList_struct *c)
-{
- if (likely(h->transMethod & CFGTBL_Trans_Performant))
- c->busaddr |= 1 | (h->blockFetchTable[c->Header.SGList] << 1);
-}
-
-/*
- * Enqueuing and dequeuing functions for cmdlists.
- */
-static inline void addQ(struct list_head *list, CommandList_struct *c)
-{
- list_add_tail(&c->list, list);
-}
-
-static inline void removeQ(CommandList_struct *c)
-{
- /*
- * After kexec/dump some commands might still
- * be in flight, which the firmware will try
- * to complete. Resetting the firmware doesn't work
- * with old fw revisions, so we have to mark
- * them off as 'stale' to prevent the driver from
- * falling over.
- */
- if (WARN_ON(list_empty(&c->list))) {
- c->cmd_type = CMD_MSG_STALE;
- return;
- }
-
- list_del_init(&c->list);
-}
-
-static void enqueue_cmd_and_start_io(ctlr_info_t *h,
- CommandList_struct *c)
-{
- unsigned long flags;
- set_performant_mode(h, c);
- spin_lock_irqsave(&h->lock, flags);
- addQ(&h->reqQ, c);
- h->Qdepth++;
- if (h->Qdepth > h->maxQsinceinit)
- h->maxQsinceinit = h->Qdepth;
- start_io(h);
- spin_unlock_irqrestore(&h->lock, flags);
-}
-
-static void cciss_free_sg_chain_blocks(SGDescriptor_struct **cmd_sg_list,
- int nr_cmds)
-{
- int i;
-
- if (!cmd_sg_list)
- return;
- for (i = 0; i < nr_cmds; i++) {
- kfree(cmd_sg_list[i]);
- cmd_sg_list[i] = NULL;
- }
- kfree(cmd_sg_list);
-}
-
-static SGDescriptor_struct **cciss_allocate_sg_chain_blocks(
- ctlr_info_t *h, int chainsize, int nr_cmds)
-{
- int j;
- SGDescriptor_struct **cmd_sg_list;
-
- if (chainsize <= 0)
- return NULL;
-
- cmd_sg_list = kmalloc(sizeof(*cmd_sg_list) * nr_cmds, GFP_KERNEL);
- if (!cmd_sg_list)
- return NULL;
-
- /* Build up chain blocks for each command */
- for (j = 0; j < nr_cmds; j++) {
- /* Need a block of chainsized s/g elements. */
- cmd_sg_list[j] = kmalloc((chainsize *
- sizeof(*cmd_sg_list[j])), GFP_KERNEL);
- if (!cmd_sg_list[j]) {
- dev_err(&h->pdev->dev, "Cannot get memory "
- "for s/g chains.\n");
- goto clean;
- }
- }
- return cmd_sg_list;
-clean:
- cciss_free_sg_chain_blocks(cmd_sg_list, nr_cmds);
- return NULL;
-}
-
-static void cciss_unmap_sg_chain_block(ctlr_info_t *h, CommandList_struct *c)
-{
- SGDescriptor_struct *chain_sg;
- u64bit temp64;
-
- if (c->Header.SGTotal <= h->max_cmd_sgentries)
- return;
-
- chain_sg = &c->SG[h->max_cmd_sgentries - 1];
- temp64.val32.lower = chain_sg->Addr.lower;
- temp64.val32.upper = chain_sg->Addr.upper;
- pci_unmap_single(h->pdev, temp64.val, chain_sg->Len, PCI_DMA_TODEVICE);
-}
-
-static int cciss_map_sg_chain_block(ctlr_info_t *h, CommandList_struct *c,
- SGDescriptor_struct *chain_block, int len)
-{
- SGDescriptor_struct *chain_sg;
- u64bit temp64;
-
- chain_sg = &c->SG[h->max_cmd_sgentries - 1];
- chain_sg->Ext = CCISS_SG_CHAIN;
- chain_sg->Len = len;
- temp64.val = pci_map_single(h->pdev, chain_block, len,
- PCI_DMA_TODEVICE);
- if (dma_mapping_error(&h->pdev->dev, temp64.val)) {
- dev_warn(&h->pdev->dev,
- "%s: error mapping chain block for DMA\n",
- __func__);
- return -1;
- }
- chain_sg->Addr.lower = temp64.val32.lower;
- chain_sg->Addr.upper = temp64.val32.upper;
-
- return 0;
-}
-
-#include "cciss_scsi.c" /* For SCSI tape support */
-
-static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
- "UNKNOWN"
-};
-#define RAID_UNKNOWN (ARRAY_SIZE(raid_label)-1)
-
-#ifdef CONFIG_PROC_FS
-
-/*
- * Report information about this controller.
- */
-#define ENG_GIG 1000000000
-#define ENG_GIG_FACTOR (ENG_GIG/512)
-#define ENGAGE_SCSI "engage scsi"
-
-static void cciss_seq_show_header(struct seq_file *seq)
-{
- ctlr_info_t *h = seq->private;
-
- seq_printf(seq, "%s: HP %s Controller\n"
- "Board ID: 0x%08lx\n"
- "Firmware Version: %c%c%c%c\n"
- "IRQ: %d\n"
- "Logical drives: %d\n"
- "Current Q depth: %d\n"
- "Current # commands on controller: %d\n"
- "Max Q depth since init: %d\n"
- "Max # commands on controller since init: %d\n"
- "Max SG entries since init: %d\n",
- h->devname,
- h->product_name,
- (unsigned long)h->board_id,
- h->firm_ver[0], h->firm_ver[1], h->firm_ver[2],
- h->firm_ver[3], (unsigned int)h->intr[h->intr_mode],
- h->num_luns,
- h->Qdepth, h->commands_outstanding,
- h->maxQsinceinit, h->max_outstanding, h->maxSG);
-
-#ifdef CONFIG_CISS_SCSI_TAPE
- cciss_seq_tape_report(seq, h);
-#endif /* CONFIG_CISS_SCSI_TAPE */
-}
-
-static void *cciss_seq_start(struct seq_file *seq, loff_t *pos)
-{
- ctlr_info_t *h = seq->private;
- unsigned long flags;
-
- /* prevent displaying bogus info during configuration
- * or deconfiguration of a logical volume
- */
- spin_lock_irqsave(&h->lock, flags);
- if (h->busy_configuring) {
- spin_unlock_irqrestore(&h->lock, flags);
- return ERR_PTR(-EBUSY);
- }
- h->busy_configuring = 1;
- spin_unlock_irqrestore(&h->lock, flags);
-
- if (*pos == 0)
- cciss_seq_show_header(seq);
-
- return pos;
-}
-
-static int cciss_seq_show(struct seq_file *seq, void *v)
-{
- sector_t vol_sz, vol_sz_frac;
- ctlr_info_t *h = seq->private;
- unsigned ctlr = h->ctlr;
- loff_t *pos = v;
- drive_info_struct *drv = h->drv[*pos];
-
- if (*pos > h->highest_lun)
- return 0;
-
- if (drv == NULL) /* it's possible for h->drv[] to have holes. */
- return 0;
-
- if (drv->heads == 0)
- return 0;
-
- vol_sz = drv->nr_blocks;
- vol_sz_frac = sector_div(vol_sz, ENG_GIG_FACTOR);
- vol_sz_frac *= 100;
- sector_div(vol_sz_frac, ENG_GIG_FACTOR);
-
- if (drv->raid_level < 0 || drv->raid_level > RAID_UNKNOWN)
- drv->raid_level = RAID_UNKNOWN;
- seq_printf(seq, "cciss/c%dd%d:"
- "\t%4u.%02uGB\tRAID %s\n",
- ctlr, (int) *pos, (int)vol_sz, (int)vol_sz_frac,
- raid_label[drv->raid_level]);
- return 0;
-}
-
-static void *cciss_seq_next(struct seq_file *seq, void *v, loff_t *pos)
-{
- ctlr_info_t *h = seq->private;
-
- if (*pos > h->highest_lun)
- return NULL;
- *pos += 1;
-
- return pos;
-}
-
-static void cciss_seq_stop(struct seq_file *seq, void *v)
-{
- ctlr_info_t *h = seq->private;
-
- /* Only reset h->busy_configuring if we succeeded in setting
- * it during cciss_seq_start. */
- if (v == ERR_PTR(-EBUSY))
- return;
-
- h->busy_configuring = 0;
-}
-
-static const struct seq_operations cciss_seq_ops = {
- .start = cciss_seq_start,
- .show = cciss_seq_show,
- .next = cciss_seq_next,
- .stop = cciss_seq_stop,
-};
-
-static int cciss_seq_open(struct inode *inode, struct file *file)
-{
- int ret = seq_open(file, &cciss_seq_ops);
- struct seq_file *seq = file->private_data;
-
- if (!ret)
- seq->private = PDE_DATA(inode);
-
- return ret;
-}
-
-static ssize_t
-cciss_proc_write(struct file *file, const char __user *buf,
- size_t length, loff_t *ppos)
-{
- int err;
- char *buffer;
-
-#ifndef CONFIG_CISS_SCSI_TAPE
- return -EINVAL;
-#endif
-
- if (!buf || length > PAGE_SIZE - 1)
- return -EINVAL;
-
- buffer = memdup_user_nul(buf, length);
- if (IS_ERR(buffer))
- return PTR_ERR(buffer);
-
-#ifdef CONFIG_CISS_SCSI_TAPE
- if (strncmp(ENGAGE_SCSI, buffer, sizeof ENGAGE_SCSI - 1) == 0) {
- struct seq_file *seq = file->private_data;
- ctlr_info_t *h = seq->private;
-
- err = cciss_engage_scsi(h);
- if (err == 0)
- err = length;
- } else
-#endif /* CONFIG_CISS_SCSI_TAPE */
- err = -EINVAL;
- /* might be nice to have "disengage" too, but it's not
- safely possible. (only 1 module use count, lock issues.) */
-
- kfree(buffer);
- return err;
-}
-
-static const struct file_operations cciss_proc_fops = {
- .owner = THIS_MODULE,
- .open = cciss_seq_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = seq_release,
- .write = cciss_proc_write,
-};
-
-static void cciss_procinit(ctlr_info_t *h)
-{
- struct proc_dir_entry *pde;
-
- if (proc_cciss == NULL)
- proc_cciss = proc_mkdir("driver/cciss", NULL);
- if (!proc_cciss)
- return;
- pde = proc_create_data(h->devname, S_IWUSR | S_IRUSR | S_IRGRP |
- S_IROTH, proc_cciss,
- &cciss_proc_fops, h);
-}
-#endif /* CONFIG_PROC_FS */
-
-#define MAX_PRODUCT_NAME_LEN 19
-
-#define to_hba(n) container_of(n, struct ctlr_info, dev)
-#define to_drv(n) container_of(n, drive_info_struct, dev)
-
-/* List of controllers which cannot be hard reset on kexec with reset_devices */
-static u32 unresettable_controller[] = {
- 0x3223103C, /* Smart Array P800 */
- 0x3234103C, /* Smart Array P400 */
- 0x3235103C, /* Smart Array P400i */
- 0x3211103C, /* Smart Array E200i */
- 0x3212103C, /* Smart Array E200 */
- 0x3213103C, /* Smart Array E200i */
- 0x3214103C, /* Smart Array E200i */
- 0x3215103C, /* Smart Array E200i */
- 0x3237103C, /* Smart Array E500 */
- 0x323D103C, /* Smart Array P700m */
- 0x40800E11, /* Smart Array 5i */
- 0x409C0E11, /* Smart Array 6400 */
- 0x409D0E11, /* Smart Array 6400 EM */
- 0x40700E11, /* Smart Array 5300 */
- 0x40820E11, /* Smart Array 532 */
- 0x40830E11, /* Smart Array 5312 */
- 0x409A0E11, /* Smart Array 641 */
- 0x409B0E11, /* Smart Array 642 */
- 0x40910E11, /* Smart Array 6i */
-};
-
-/* List of controllers which cannot even be soft reset */
-static u32 soft_unresettable_controller[] = {
- 0x40800E11, /* Smart Array 5i */
- 0x40700E11, /* Smart Array 5300 */
- 0x40820E11, /* Smart Array 532 */
- 0x40830E11, /* Smart Array 5312 */
- 0x409A0E11, /* Smart Array 641 */
- 0x409B0E11, /* Smart Array 642 */
- 0x40910E11, /* Smart Array 6i */
- /* Exclude 640x boards. These are two pci devices in one slot
- * which share a battery backed cache module. One controls the
- * cache, the other accesses the cache through the one that controls
- * it. If we reset the one controlling the cache, the other will
- * likely not be happy. Just forbid resetting this conjoined mess.
- */
- 0x409C0E11, /* Smart Array 6400 */
- 0x409D0E11, /* Smart Array 6400 EM */
-};
-
-static int ctlr_is_hard_resettable(u32 board_id)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(unresettable_controller); i++)
- if (unresettable_controller[i] == board_id)
- return 0;
- return 1;
-}
-
-static int ctlr_is_soft_resettable(u32 board_id)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(soft_unresettable_controller); i++)
- if (soft_unresettable_controller[i] == board_id)
- return 0;
- return 1;
-}
-
-static int ctlr_is_resettable(u32 board_id)
-{
- return ctlr_is_hard_resettable(board_id) ||
- ctlr_is_soft_resettable(board_id);
-}
-
-static ssize_t host_show_resettable(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ctlr_info *h = to_hba(dev);
-
- return snprintf(buf, 20, "%d\n", ctlr_is_resettable(h->board_id));
-}
-static DEVICE_ATTR(resettable, S_IRUGO, host_show_resettable, NULL);
-
-static ssize_t host_store_rescan(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct ctlr_info *h = to_hba(dev);
-
- add_to_scan_list(h);
- wake_up_process(cciss_scan_thread);
- wait_for_completion_interruptible(&h->scan_wait);
-
- return count;
-}
-static DEVICE_ATTR(rescan, S_IWUSR, NULL, host_store_rescan);
-
-static ssize_t host_show_transport_mode(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ctlr_info *h = to_hba(dev);
-
- return snprintf(buf, 20, "%s\n",
- h->transMethod & CFGTBL_Trans_Performant ?
- "performant" : "simple");
-}
-static DEVICE_ATTR(transport_mode, S_IRUGO, host_show_transport_mode, NULL);
-
-static ssize_t dev_show_unique_id(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- drive_info_struct *drv = to_drv(dev);
- struct ctlr_info *h = to_hba(drv->dev.parent);
- __u8 sn[16];
- unsigned long flags;
- int ret = 0;
-
- spin_lock_irqsave(&h->lock, flags);
- if (h->busy_configuring)
- ret = -EBUSY;
- else
- memcpy(sn, drv->serial_no, sizeof(sn));
- spin_unlock_irqrestore(&h->lock, flags);
-
- if (ret)
- return ret;
- else
- return snprintf(buf, 16 * 2 + 2,
- "%02X%02X%02X%02X%02X%02X%02X%02X"
- "%02X%02X%02X%02X%02X%02X%02X%02X\n",
- sn[0], sn[1], sn[2], sn[3],
- sn[4], sn[5], sn[6], sn[7],
- sn[8], sn[9], sn[10], sn[11],
- sn[12], sn[13], sn[14], sn[15]);
-}
-static DEVICE_ATTR(unique_id, S_IRUGO, dev_show_unique_id, NULL);
-
-static ssize_t dev_show_vendor(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- drive_info_struct *drv = to_drv(dev);
- struct ctlr_info *h = to_hba(drv->dev.parent);
- char vendor[VENDOR_LEN + 1];
- unsigned long flags;
- int ret = 0;
-
- spin_lock_irqsave(&h->lock, flags);
- if (h->busy_configuring)
- ret = -EBUSY;
- else
- memcpy(vendor, drv->vendor, VENDOR_LEN + 1);
- spin_unlock_irqrestore(&h->lock, flags);
-
- if (ret)
- return ret;
- else
- return snprintf(buf, sizeof(vendor) + 1, "%s\n", drv->vendor);
-}
-static DEVICE_ATTR(vendor, S_IRUGO, dev_show_vendor, NULL);
-
-static ssize_t dev_show_model(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- drive_info_struct *drv = to_drv(dev);
- struct ctlr_info *h = to_hba(drv->dev.parent);
- char model[MODEL_LEN + 1];
- unsigned long flags;
- int ret = 0;
-
- spin_lock_irqsave(&h->lock, flags);
- if (h->busy_configuring)
- ret = -EBUSY;
- else
- memcpy(model, drv->model, MODEL_LEN + 1);
- spin_unlock_irqrestore(&h->lock, flags);
-
- if (ret)
- return ret;
- else
- return snprintf(buf, sizeof(model) + 1, "%s\n", drv->model);
-}
-static DEVICE_ATTR(model, S_IRUGO, dev_show_model, NULL);
-
-static ssize_t dev_show_rev(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- drive_info_struct *drv = to_drv(dev);
- struct ctlr_info *h = to_hba(drv->dev.parent);
- char rev[REV_LEN + 1];
- unsigned long flags;
- int ret = 0;
-
- spin_lock_irqsave(&h->lock, flags);
- if (h->busy_configuring)
- ret = -EBUSY;
- else
- memcpy(rev, drv->rev, REV_LEN + 1);
- spin_unlock_irqrestore(&h->lock, flags);
-
- if (ret)
- return ret;
- else
- return snprintf(buf, sizeof(rev) + 1, "%s\n", drv->rev);
-}
-static DEVICE_ATTR(rev, S_IRUGO, dev_show_rev, NULL);
-
-static ssize_t cciss_show_lunid(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- drive_info_struct *drv = to_drv(dev);
- struct ctlr_info *h = to_hba(drv->dev.parent);
- unsigned long flags;
- unsigned char lunid[8];
-
- spin_lock_irqsave(&h->lock, flags);
- if (h->busy_configuring) {
- spin_unlock_irqrestore(&h->lock, flags);
- return -EBUSY;
- }
- if (!drv->heads) {
- spin_unlock_irqrestore(&h->lock, flags);
- return -ENOTTY;
- }
- memcpy(lunid, drv->LunID, sizeof(lunid));
- spin_unlock_irqrestore(&h->lock, flags);
- return snprintf(buf, 20, "0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
- lunid[0], lunid[1], lunid[2], lunid[3],
- lunid[4], lunid[5], lunid[6], lunid[7]);
-}
-static DEVICE_ATTR(lunid, S_IRUGO, cciss_show_lunid, NULL);
-
-static ssize_t cciss_show_raid_level(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- drive_info_struct *drv = to_drv(dev);
- struct ctlr_info *h = to_hba(drv->dev.parent);
- int raid;
- unsigned long flags;
-
- spin_lock_irqsave(&h->lock, flags);
- if (h->busy_configuring) {
- spin_unlock_irqrestore(&h->lock, flags);
- return -EBUSY;
- }
- raid = drv->raid_level;
- spin_unlock_irqrestore(&h->lock, flags);
- if (raid < 0 || raid > RAID_UNKNOWN)
- raid = RAID_UNKNOWN;
-
- return snprintf(buf, strlen(raid_label[raid]) + 7, "RAID %s\n",
- raid_label[raid]);
-}
-static DEVICE_ATTR(raid_level, S_IRUGO, cciss_show_raid_level, NULL);
-
-static ssize_t cciss_show_usage_count(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- drive_info_struct *drv = to_drv(dev);
- struct ctlr_info *h = to_hba(drv->dev.parent);
- unsigned long flags;
- int count;
-
- spin_lock_irqsave(&h->lock, flags);
- if (h->busy_configuring) {
- spin_unlock_irqrestore(&h->lock, flags);
- return -EBUSY;
- }
- count = drv->usage_count;
- spin_unlock_irqrestore(&h->lock, flags);
- return snprintf(buf, 20, "%d\n", count);
-}
-static DEVICE_ATTR(usage_count, S_IRUGO, cciss_show_usage_count, NULL);
-
-static struct attribute *cciss_host_attrs[] = {
- &dev_attr_rescan.attr,
- &dev_attr_resettable.attr,
- &dev_attr_transport_mode.attr,
- NULL
-};
-
-static struct attribute_group cciss_host_attr_group = {
- .attrs = cciss_host_attrs,
-};
-
-static const struct attribute_group *cciss_host_attr_groups[] = {
- &cciss_host_attr_group,
- NULL
-};
-
-static struct device_type cciss_host_type = {
- .name = "cciss_host",
- .groups = cciss_host_attr_groups,
- .release = cciss_hba_release,
-};
-
-static struct attribute *cciss_dev_attrs[] = {
- &dev_attr_unique_id.attr,
- &dev_attr_model.attr,
- &dev_attr_vendor.attr,
- &dev_attr_rev.attr,
- &dev_attr_lunid.attr,
- &dev_attr_raid_level.attr,
- &dev_attr_usage_count.attr,
- NULL
-};
-
-static struct attribute_group cciss_dev_attr_group = {
- .attrs = cciss_dev_attrs,
-};
-
-static const struct attribute_group *cciss_dev_attr_groups[] = {
- &cciss_dev_attr_group,
- NULL
-};
-
-static struct device_type cciss_dev_type = {
- .name = "cciss_device",
- .groups = cciss_dev_attr_groups,
- .release = cciss_device_release,
-};
-
-static struct bus_type cciss_bus_type = {
- .name = "cciss",
-};
-
-/*
- * cciss_hba_release is called when the reference count
- * of h->dev goes to zero.
- */
-static void cciss_hba_release(struct device *dev)
-{
- /*
- * nothing to do, but need this to avoid a warning
- * about not having a release handler from lib/kref.c.
- */
-}
-
-/*
- * Initialize sysfs entry for each controller. This sets up and registers
- * the 'cciss#' directory for each individual controller under
- * /sys/bus/pci/devices/<dev>/.
- */
-static int cciss_create_hba_sysfs_entry(struct ctlr_info *h)
-{
- device_initialize(&h->dev);
- h->dev.type = &cciss_host_type;
- h->dev.bus = &cciss_bus_type;
- dev_set_name(&h->dev, "%s", h->devname);
- h->dev.parent = &h->pdev->dev;
-
- return device_add(&h->dev);
-}
-
-/*
- * Remove sysfs entries for an hba.
- */
-static void cciss_destroy_hba_sysfs_entry(struct ctlr_info *h)
-{
- device_del(&h->dev);
- put_device(&h->dev); /* final put. */
-}
-
-/* cciss_device_release is called when the reference count
- * of h->drv[x]dev goes to zero.
- */
-static void cciss_device_release(struct device *dev)
-{
- drive_info_struct *drv = to_drv(dev);
- kfree(drv);
-}
-
-/*
- * Initialize sysfs for each logical drive. This sets up and registers
- * the 'c#d#' directory for each individual logical drive under
- * /sys/bus/pci/devices/<dev/ccis#/. We also create a link from
- * /sys/block/cciss!c#d# to this entry.
- */
-static long cciss_create_ld_sysfs_entry(struct ctlr_info *h,
- int drv_index)
-{
- struct device *dev;
-
- if (h->drv[drv_index]->device_initialized)
- return 0;
-
- dev = &h->drv[drv_index]->dev;
- device_initialize(dev);
- dev->type = &cciss_dev_type;
- dev->bus = &cciss_bus_type;
- dev_set_name(dev, "c%dd%d", h->ctlr, drv_index);
- dev->parent = &h->dev;
- h->drv[drv_index]->device_initialized = 1;
- return device_add(dev);
-}
-
-/*
- * Remove sysfs entries for a logical drive.
- */
-static void cciss_destroy_ld_sysfs_entry(struct ctlr_info *h, int drv_index,
- int ctlr_exiting)
-{
- struct device *dev = &h->drv[drv_index]->dev;
-
- /* special case for c*d0, we only destroy it on controller exit */
- if (drv_index == 0 && !ctlr_exiting)
- return;
-
- device_del(dev);
- put_device(dev); /* the "final" put. */
- h->drv[drv_index] = NULL;
-}
-
-/*
- * For operations that cannot sleep, a command block is allocated at init,
- * and managed by cmd_alloc() and cmd_free() using a simple bitmap to track
- * which ones are free or in use.
- */
-static CommandList_struct *cmd_alloc(ctlr_info_t *h)
-{
- CommandList_struct *c;
- int i;
- u64bit temp64;
- dma_addr_t cmd_dma_handle, err_dma_handle;
-
- do {
- i = find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds);
- if (i == h->nr_cmds)
- return NULL;
- } while (test_and_set_bit(i, h->cmd_pool_bits) != 0);
- c = h->cmd_pool + i;
- memset(c, 0, sizeof(CommandList_struct));
- cmd_dma_handle = h->cmd_pool_dhandle + i * sizeof(CommandList_struct);
- c->err_info = h->errinfo_pool + i;
- memset(c->err_info, 0, sizeof(ErrorInfo_struct));
- err_dma_handle = h->errinfo_pool_dhandle
- + i * sizeof(ErrorInfo_struct);
- h->nr_allocs++;
-
- c->cmdindex = i;
-
- INIT_LIST_HEAD(&c->list);
- c->busaddr = (__u32) cmd_dma_handle;
- temp64.val = (__u64) err_dma_handle;
- c->ErrDesc.Addr.lower = temp64.val32.lower;
- c->ErrDesc.Addr.upper = temp64.val32.upper;
- c->ErrDesc.Len = sizeof(ErrorInfo_struct);
-
- c->ctlr = h->ctlr;
- return c;
-}
-
-/* allocate a command using pci_alloc_consistent, used for ioctls,
- * etc., not for the main i/o path.
- */
-static CommandList_struct *cmd_special_alloc(ctlr_info_t *h)
-{
- CommandList_struct *c;
- u64bit temp64;
- dma_addr_t cmd_dma_handle, err_dma_handle;
-
- c = pci_zalloc_consistent(h->pdev, sizeof(CommandList_struct),
- &cmd_dma_handle);
- if (c == NULL)
- return NULL;
-
- c->cmdindex = -1;
-
- c->err_info = pci_zalloc_consistent(h->pdev, sizeof(ErrorInfo_struct),
- &err_dma_handle);
-
- if (c->err_info == NULL) {
- pci_free_consistent(h->pdev,
- sizeof(CommandList_struct), c, cmd_dma_handle);
- return NULL;
- }
-
- INIT_LIST_HEAD(&c->list);
- c->busaddr = (__u32) cmd_dma_handle;
- temp64.val = (__u64) err_dma_handle;
- c->ErrDesc.Addr.lower = temp64.val32.lower;
- c->ErrDesc.Addr.upper = temp64.val32.upper;
- c->ErrDesc.Len = sizeof(ErrorInfo_struct);
-
- c->ctlr = h->ctlr;
- return c;
-}
-
-static void cmd_free(ctlr_info_t *h, CommandList_struct *c)
-{
- int i;
-
- i = c - h->cmd_pool;
- clear_bit(i, h->cmd_pool_bits);
- h->nr_frees++;
-}
-
-static void cmd_special_free(ctlr_info_t *h, CommandList_struct *c)
-{
- u64bit temp64;
-
- temp64.val32.lower = c->ErrDesc.Addr.lower;
- temp64.val32.upper = c->ErrDesc.Addr.upper;
- pci_free_consistent(h->pdev, sizeof(ErrorInfo_struct),
- c->err_info, (dma_addr_t) temp64.val);
- pci_free_consistent(h->pdev, sizeof(CommandList_struct), c,
- (dma_addr_t) cciss_tag_discard_error_bits(h, (u32) c->busaddr));
-}
-
-static inline ctlr_info_t *get_host(struct gendisk *disk)
-{
- return disk->queue->queuedata;
-}
-
-static inline drive_info_struct *get_drv(struct gendisk *disk)
-{
- return disk->private_data;
-}
-
-/*
- * Open. Make sure the device is really there.
- */
-static int cciss_open(struct block_device *bdev, fmode_t mode)
-{
- ctlr_info_t *h = get_host(bdev->bd_disk);
- drive_info_struct *drv = get_drv(bdev->bd_disk);
-
- dev_dbg(&h->pdev->dev, "cciss_open %s\n", bdev->bd_disk->disk_name);
- if (drv->busy_configuring)
- return -EBUSY;
- /*
- * Root is allowed to open raw volume zero even if it's not configured
- * so array config can still work. Root is also allowed to open any
- * volume that has a LUN ID, so it can issue IOCTL to reread the
- * disk information. I don't think I really like this
- * but I'm already using way to many device nodes to claim another one
- * for "raw controller".
- */
- if (drv->heads == 0) {
- if (MINOR(bdev->bd_dev) != 0) { /* not node 0? */
- /* if not node 0 make sure it is a partition = 0 */
- if (MINOR(bdev->bd_dev) & 0x0f) {
- return -ENXIO;
- /* if it is, make sure we have a LUN ID */
- } else if (memcmp(drv->LunID, CTLR_LUNID,
- sizeof(drv->LunID))) {
- return -ENXIO;
- }
- }
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
- }
- drv->usage_count++;
- h->usage_count++;
- return 0;
-}
-
-static int cciss_unlocked_open(struct block_device *bdev, fmode_t mode)
-{
- int ret;
-
- mutex_lock(&cciss_mutex);
- ret = cciss_open(bdev, mode);
- mutex_unlock(&cciss_mutex);
-
- return ret;
-}
-
-/*
- * Close. Sync first.
- */
-static void cciss_release(struct gendisk *disk, fmode_t mode)
-{
- ctlr_info_t *h;
- drive_info_struct *drv;
-
- mutex_lock(&cciss_mutex);
- h = get_host(disk);
- drv = get_drv(disk);
- dev_dbg(&h->pdev->dev, "cciss_release %s\n", disk->disk_name);
- drv->usage_count--;
- h->usage_count--;
- mutex_unlock(&cciss_mutex);
-}
-
-#ifdef CONFIG_COMPAT
-
-static int cciss_ioctl32_passthru(struct block_device *bdev, fmode_t mode,
- unsigned cmd, unsigned long arg);
-static int cciss_ioctl32_big_passthru(struct block_device *bdev, fmode_t mode,
- unsigned cmd, unsigned long arg);
-
-static int cciss_compat_ioctl(struct block_device *bdev, fmode_t mode,
- unsigned cmd, unsigned long arg)
-{
- switch (cmd) {
- case CCISS_GETPCIINFO:
- case CCISS_GETINTINFO:
- case CCISS_SETINTINFO:
- case CCISS_GETNODENAME:
- case CCISS_SETNODENAME:
- case CCISS_GETHEARTBEAT:
- case CCISS_GETBUSTYPES:
- case CCISS_GETFIRMVER:
- case CCISS_GETDRIVVER:
- case CCISS_REVALIDVOLS:
- case CCISS_DEREGDISK:
- case CCISS_REGNEWDISK:
- case CCISS_REGNEWD:
- case CCISS_RESCANDISK:
- case CCISS_GETLUNINFO:
- return cciss_ioctl(bdev, mode, cmd, arg);
-
- case CCISS_PASSTHRU32:
- return cciss_ioctl32_passthru(bdev, mode, cmd, arg);
- case CCISS_BIG_PASSTHRU32:
- return cciss_ioctl32_big_passthru(bdev, mode, cmd, arg);
-
- default:
- return -ENOIOCTLCMD;
- }
-}
-
-static int cciss_ioctl32_passthru(struct block_device *bdev, fmode_t mode,
- unsigned cmd, unsigned long arg)
-{
- IOCTL32_Command_struct __user *arg32 =
- (IOCTL32_Command_struct __user *) arg;
- IOCTL_Command_struct arg64;
- IOCTL_Command_struct __user *p = compat_alloc_user_space(sizeof(arg64));
- int err;
- u32 cp;
-
- memset(&arg64, 0, sizeof(arg64));
- err = 0;
- err |=
- copy_from_user(&arg64.LUN_info, &arg32->LUN_info,
- sizeof(arg64.LUN_info));
- err |=
- copy_from_user(&arg64.Request, &arg32->Request,
- sizeof(arg64.Request));
- err |=
- copy_from_user(&arg64.error_info, &arg32->error_info,
- sizeof(arg64.error_info));
- err |= get_user(arg64.buf_size, &arg32->buf_size);
- err |= get_user(cp, &arg32->buf);
- arg64.buf = compat_ptr(cp);
- err |= copy_to_user(p, &arg64, sizeof(arg64));
-
- if (err)
- return -EFAULT;
-
- err = cciss_ioctl(bdev, mode, CCISS_PASSTHRU, (unsigned long)p);
- if (err)
- return err;
- err |=
- copy_in_user(&arg32->error_info, &p->error_info,
- sizeof(arg32->error_info));
- if (err)
- return -EFAULT;
- return err;
-}
-
-static int cciss_ioctl32_big_passthru(struct block_device *bdev, fmode_t mode,
- unsigned cmd, unsigned long arg)
-{
- BIG_IOCTL32_Command_struct __user *arg32 =
- (BIG_IOCTL32_Command_struct __user *) arg;
- BIG_IOCTL_Command_struct arg64;
- BIG_IOCTL_Command_struct __user *p =
- compat_alloc_user_space(sizeof(arg64));
- int err;
- u32 cp;
-
- memset(&arg64, 0, sizeof(arg64));
- err = 0;
- err |=
- copy_from_user(&arg64.LUN_info, &arg32->LUN_info,
- sizeof(arg64.LUN_info));
- err |=
- copy_from_user(&arg64.Request, &arg32->Request,
- sizeof(arg64.Request));
- err |=
- copy_from_user(&arg64.error_info, &arg32->error_info,
- sizeof(arg64.error_info));
- err |= get_user(arg64.buf_size, &arg32->buf_size);
- err |= get_user(arg64.malloc_size, &arg32->malloc_size);
- err |= get_user(cp, &arg32->buf);
- arg64.buf = compat_ptr(cp);
- err |= copy_to_user(p, &arg64, sizeof(arg64));
-
- if (err)
- return -EFAULT;
-
- err = cciss_ioctl(bdev, mode, CCISS_BIG_PASSTHRU, (unsigned long)p);
- if (err)
- return err;
- err |=
- copy_in_user(&arg32->error_info, &p->error_info,
- sizeof(arg32->error_info));
- if (err)
- return -EFAULT;
- return err;
-}
-#endif
-
-static int cciss_getgeo(struct block_device *bdev, struct hd_geometry *geo)
-{
- drive_info_struct *drv = get_drv(bdev->bd_disk);
-
- if (!drv->cylinders)
- return -ENXIO;
-
- geo->heads = drv->heads;
- geo->sectors = drv->sectors;
- geo->cylinders = drv->cylinders;
- return 0;
-}
-
-static void check_ioctl_unit_attention(ctlr_info_t *h, CommandList_struct *c)
-{
- if (c->err_info->CommandStatus == CMD_TARGET_STATUS &&
- c->err_info->ScsiStatus != SAM_STAT_CHECK_CONDITION)
- (void)check_for_unit_attention(h, c);
-}
-
-static int cciss_getpciinfo(ctlr_info_t *h, void __user *argp)
-{
- cciss_pci_info_struct pciinfo;
-
- if (!argp)
- return -EINVAL;
- pciinfo.domain = pci_domain_nr(h->pdev->bus);
- pciinfo.bus = h->pdev->bus->number;
- pciinfo.dev_fn = h->pdev->devfn;
- pciinfo.board_id = h->board_id;
- if (copy_to_user(argp, &pciinfo, sizeof(cciss_pci_info_struct)))
- return -EFAULT;
- return 0;
-}
-
-static int cciss_getintinfo(ctlr_info_t *h, void __user *argp)
-{
- cciss_coalint_struct intinfo;
- unsigned long flags;
-
- if (!argp)
- return -EINVAL;
- spin_lock_irqsave(&h->lock, flags);
- intinfo.delay = readl(&h->cfgtable->HostWrite.CoalIntDelay);
- intinfo.count = readl(&h->cfgtable->HostWrite.CoalIntCount);
- spin_unlock_irqrestore(&h->lock, flags);
- if (copy_to_user
- (argp, &intinfo, sizeof(cciss_coalint_struct)))
- return -EFAULT;
- return 0;
-}
-
-static int cciss_setintinfo(ctlr_info_t *h, void __user *argp)
-{
- cciss_coalint_struct intinfo;
- unsigned long flags;
- int i;
-
- if (!argp)
- return -EINVAL;
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
- if (copy_from_user(&intinfo, argp, sizeof(intinfo)))
- return -EFAULT;
- if ((intinfo.delay == 0) && (intinfo.count == 0))
- return -EINVAL;
- spin_lock_irqsave(&h->lock, flags);
- /* Update the field, and then ring the doorbell */
- writel(intinfo.delay, &(h->cfgtable->HostWrite.CoalIntDelay));
- writel(intinfo.count, &(h->cfgtable->HostWrite.CoalIntCount));
- writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
-
- for (i = 0; i < MAX_IOCTL_CONFIG_WAIT; i++) {
- if (!(readl(h->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq))
- break;
- udelay(1000); /* delay and try again */
- }
- spin_unlock_irqrestore(&h->lock, flags);
- if (i >= MAX_IOCTL_CONFIG_WAIT)
- return -EAGAIN;
- return 0;
-}
-
-static int cciss_getnodename(ctlr_info_t *h, void __user *argp)
-{
- NodeName_type NodeName;
- unsigned long flags;
- int i;
-
- if (!argp)
- return -EINVAL;
- spin_lock_irqsave(&h->lock, flags);
- for (i = 0; i < 16; i++)
- NodeName[i] = readb(&h->cfgtable->ServerName[i]);
- spin_unlock_irqrestore(&h->lock, flags);
- if (copy_to_user(argp, NodeName, sizeof(NodeName_type)))
- return -EFAULT;
- return 0;
-}
-
-static int cciss_setnodename(ctlr_info_t *h, void __user *argp)
-{
- NodeName_type NodeName;
- unsigned long flags;
- int i;
-
- if (!argp)
- return -EINVAL;
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
- if (copy_from_user(NodeName, argp, sizeof(NodeName_type)))
- return -EFAULT;
- spin_lock_irqsave(&h->lock, flags);
- /* Update the field, and then ring the doorbell */
- for (i = 0; i < 16; i++)
- writeb(NodeName[i], &h->cfgtable->ServerName[i]);
- writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
- for (i = 0; i < MAX_IOCTL_CONFIG_WAIT; i++) {
- if (!(readl(h->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq))
- break;
- udelay(1000); /* delay and try again */
- }
- spin_unlock_irqrestore(&h->lock, flags);
- if (i >= MAX_IOCTL_CONFIG_WAIT)
- return -EAGAIN;
- return 0;
-}
-
-static int cciss_getheartbeat(ctlr_info_t *h, void __user *argp)
-{
- Heartbeat_type heartbeat;
- unsigned long flags;
-
- if (!argp)
- return -EINVAL;
- spin_lock_irqsave(&h->lock, flags);
- heartbeat = readl(&h->cfgtable->HeartBeat);
- spin_unlock_irqrestore(&h->lock, flags);
- if (copy_to_user(argp, &heartbeat, sizeof(Heartbeat_type)))
- return -EFAULT;
- return 0;
-}
-
-static int cciss_getbustypes(ctlr_info_t *h, void __user *argp)
-{
- BusTypes_type BusTypes;
- unsigned long flags;
-
- if (!argp)
- return -EINVAL;
- spin_lock_irqsave(&h->lock, flags);
- BusTypes = readl(&h->cfgtable->BusTypes);
- spin_unlock_irqrestore(&h->lock, flags);
- if (copy_to_user(argp, &BusTypes, sizeof(BusTypes_type)))
- return -EFAULT;
- return 0;
-}
-
-static int cciss_getfirmver(ctlr_info_t *h, void __user *argp)
-{
- FirmwareVer_type firmware;
-
- if (!argp)
- return -EINVAL;
- memcpy(firmware, h->firm_ver, 4);
-
- if (copy_to_user
- (argp, firmware, sizeof(FirmwareVer_type)))
- return -EFAULT;
- return 0;
-}
-
-static int cciss_getdrivver(ctlr_info_t *h, void __user *argp)
-{
- DriverVer_type DriverVer = DRIVER_VERSION;
-
- if (!argp)
- return -EINVAL;
- if (copy_to_user(argp, &DriverVer, sizeof(DriverVer_type)))
- return -EFAULT;
- return 0;
-}
-
-static int cciss_getluninfo(ctlr_info_t *h,
- struct gendisk *disk, void __user *argp)
-{
- LogvolInfo_struct luninfo;
- drive_info_struct *drv = get_drv(disk);
-
- if (!argp)
- return -EINVAL;
- memcpy(&luninfo.LunID, drv->LunID, sizeof(luninfo.LunID));
- luninfo.num_opens = drv->usage_count;
- luninfo.num_parts = 0;
- if (copy_to_user(argp, &luninfo, sizeof(LogvolInfo_struct)))
- return -EFAULT;
- return 0;
-}
-
-static int cciss_passthru(ctlr_info_t *h, void __user *argp)
-{
- IOCTL_Command_struct iocommand;
- CommandList_struct *c;
- char *buff = NULL;
- u64bit temp64;
- DECLARE_COMPLETION_ONSTACK(wait);
-
- if (!argp)
- return -EINVAL;
-
- if (!capable(CAP_SYS_RAWIO))
- return -EPERM;
-
- if (copy_from_user
- (&iocommand, argp, sizeof(IOCTL_Command_struct)))
- return -EFAULT;
- if ((iocommand.buf_size < 1) &&
- (iocommand.Request.Type.Direction != XFER_NONE)) {
- return -EINVAL;
- }
- if (iocommand.buf_size > 0) {
- buff = kmalloc(iocommand.buf_size, GFP_KERNEL);
- if (buff == NULL)
- return -EFAULT;
- }
- if (iocommand.Request.Type.Direction == XFER_WRITE) {
- /* Copy the data into the buffer we created */
- if (copy_from_user(buff, iocommand.buf, iocommand.buf_size)) {
- kfree(buff);
- return -EFAULT;
- }
- } else {
- memset(buff, 0, iocommand.buf_size);
- }
- c = cmd_special_alloc(h);
- if (!c) {
- kfree(buff);
- return -ENOMEM;
- }
- /* Fill in the command type */
- c->cmd_type = CMD_IOCTL_PEND;
- /* Fill in Command Header */
- c->Header.ReplyQueue = 0; /* unused in simple mode */
- if (iocommand.buf_size > 0) { /* buffer to fill */
- c->Header.SGList = 1;
- c->Header.SGTotal = 1;
- } else { /* no buffers to fill */
- c->Header.SGList = 0;
- c->Header.SGTotal = 0;
- }
- c->Header.LUN = iocommand.LUN_info;
- /* use the kernel address the cmd block for tag */
- c->Header.Tag.lower = c->busaddr;
-
- /* Fill in Request block */
- c->Request = iocommand.Request;
-
- /* Fill in the scatter gather information */
- if (iocommand.buf_size > 0) {
- temp64.val = pci_map_single(h->pdev, buff,
- iocommand.buf_size, PCI_DMA_BIDIRECTIONAL);
- c->SG[0].Addr.lower = temp64.val32.lower;
- c->SG[0].Addr.upper = temp64.val32.upper;
- c->SG[0].Len = iocommand.buf_size;
- c->SG[0].Ext = 0; /* we are not chaining */
- }
- c->waiting = &wait;
-
- enqueue_cmd_and_start_io(h, c);
- wait_for_completion(&wait);
-
- /* unlock the buffers from DMA */
- temp64.val32.lower = c->SG[0].Addr.lower;
- temp64.val32.upper = c->SG[0].Addr.upper;
- pci_unmap_single(h->pdev, (dma_addr_t) temp64.val, iocommand.buf_size,
- PCI_DMA_BIDIRECTIONAL);
- check_ioctl_unit_attention(h, c);
-
- /* Copy the error information out */
- iocommand.error_info = *(c->err_info);
- if (copy_to_user(argp, &iocommand, sizeof(IOCTL_Command_struct))) {
- kfree(buff);
- cmd_special_free(h, c);
- return -EFAULT;
- }
-
- if (iocommand.Request.Type.Direction == XFER_READ) {
- /* Copy the data out of the buffer we created */
- if (copy_to_user(iocommand.buf, buff, iocommand.buf_size)) {
- kfree(buff);
- cmd_special_free(h, c);
- return -EFAULT;
- }
- }
- kfree(buff);
- cmd_special_free(h, c);
- return 0;
-}
-
-static int cciss_bigpassthru(ctlr_info_t *h, void __user *argp)
-{
- BIG_IOCTL_Command_struct *ioc;
- CommandList_struct *c;
- unsigned char **buff = NULL;
- int *buff_size = NULL;
- u64bit temp64;
- BYTE sg_used = 0;
- int status = 0;
- int i;
- DECLARE_COMPLETION_ONSTACK(wait);
- __u32 left;
- __u32 sz;
- BYTE __user *data_ptr;
-
- if (!argp)
- return -EINVAL;
- if (!capable(CAP_SYS_RAWIO))
- return -EPERM;
- ioc = kmalloc(sizeof(*ioc), GFP_KERNEL);
- if (!ioc) {
- status = -ENOMEM;
- goto cleanup1;
- }
- if (copy_from_user(ioc, argp, sizeof(*ioc))) {
- status = -EFAULT;
- goto cleanup1;
- }
- if ((ioc->buf_size < 1) &&
- (ioc->Request.Type.Direction != XFER_NONE)) {
- status = -EINVAL;
- goto cleanup1;
- }
- /* Check kmalloc limits using all SGs */
- if (ioc->malloc_size > MAX_KMALLOC_SIZE) {
- status = -EINVAL;
- goto cleanup1;
- }
- if (ioc->buf_size > ioc->malloc_size * MAXSGENTRIES) {
- status = -EINVAL;
- goto cleanup1;
- }
- buff = kzalloc(MAXSGENTRIES * sizeof(char *), GFP_KERNEL);
- if (!buff) {
- status = -ENOMEM;
- goto cleanup1;
- }
- buff_size = kmalloc(MAXSGENTRIES * sizeof(int), GFP_KERNEL);
- if (!buff_size) {
- status = -ENOMEM;
- goto cleanup1;
- }
- left = ioc->buf_size;
- data_ptr = ioc->buf;
- while (left) {
- sz = (left > ioc->malloc_size) ? ioc->malloc_size : left;
- buff_size[sg_used] = sz;
- buff[sg_used] = kmalloc(sz, GFP_KERNEL);
- if (buff[sg_used] == NULL) {
- status = -ENOMEM;
- goto cleanup1;
- }
- if (ioc->Request.Type.Direction == XFER_WRITE) {
- if (copy_from_user(buff[sg_used], data_ptr, sz)) {
- status = -EFAULT;
- goto cleanup1;
- }
- } else {
- memset(buff[sg_used], 0, sz);
- }
- left -= sz;
- data_ptr += sz;
- sg_used++;
- }
- c = cmd_special_alloc(h);
- if (!c) {
- status = -ENOMEM;
- goto cleanup1;
- }
- c->cmd_type = CMD_IOCTL_PEND;
- c->Header.ReplyQueue = 0;
- c->Header.SGList = sg_used;
- c->Header.SGTotal = sg_used;
- c->Header.LUN = ioc->LUN_info;
- c->Header.Tag.lower = c->busaddr;
-
- c->Request = ioc->Request;
- for (i = 0; i < sg_used; i++) {
- temp64.val = pci_map_single(h->pdev, buff[i], buff_size[i],
- PCI_DMA_BIDIRECTIONAL);
- c->SG[i].Addr.lower = temp64.val32.lower;
- c->SG[i].Addr.upper = temp64.val32.upper;
- c->SG[i].Len = buff_size[i];
- c->SG[i].Ext = 0; /* we are not chaining */
- }
- c->waiting = &wait;
- enqueue_cmd_and_start_io(h, c);
- wait_for_completion(&wait);
- /* unlock the buffers from DMA */
- for (i = 0; i < sg_used; i++) {
- temp64.val32.lower = c->SG[i].Addr.lower;
- temp64.val32.upper = c->SG[i].Addr.upper;
- pci_unmap_single(h->pdev,
- (dma_addr_t) temp64.val, buff_size[i],
- PCI_DMA_BIDIRECTIONAL);
- }
- check_ioctl_unit_attention(h, c);
- /* Copy the error information out */
- ioc->error_info = *(c->err_info);
- if (copy_to_user(argp, ioc, sizeof(*ioc))) {
- cmd_special_free(h, c);
- status = -EFAULT;
- goto cleanup1;
- }
- if (ioc->Request.Type.Direction == XFER_READ) {
- /* Copy the data out of the buffer we created */
- BYTE __user *ptr = ioc->buf;
- for (i = 0; i < sg_used; i++) {
- if (copy_to_user(ptr, buff[i], buff_size[i])) {
- cmd_special_free(h, c);
- status = -EFAULT;
- goto cleanup1;
- }
- ptr += buff_size[i];
- }
- }
- cmd_special_free(h, c);
- status = 0;
-cleanup1:
- if (buff) {
- for (i = 0; i < sg_used; i++)
- kfree(buff[i]);
- kfree(buff);
- }
- kfree(buff_size);
- kfree(ioc);
- return status;
-}
-
-static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
- unsigned int cmd, unsigned long arg)
-{
- struct gendisk *disk = bdev->bd_disk;
- ctlr_info_t *h = get_host(disk);
- void __user *argp = (void __user *)arg;
-
- dev_dbg(&h->pdev->dev, "cciss_ioctl: Called with cmd=%x %lx\n",
- cmd, arg);
- switch (cmd) {
- case CCISS_GETPCIINFO:
- return cciss_getpciinfo(h, argp);
- case CCISS_GETINTINFO:
- return cciss_getintinfo(h, argp);
- case CCISS_SETINTINFO:
- return cciss_setintinfo(h, argp);
- case CCISS_GETNODENAME:
- return cciss_getnodename(h, argp);
- case CCISS_SETNODENAME:
- return cciss_setnodename(h, argp);
- case CCISS_GETHEARTBEAT:
- return cciss_getheartbeat(h, argp);
- case CCISS_GETBUSTYPES:
- return cciss_getbustypes(h, argp);
- case CCISS_GETFIRMVER:
- return cciss_getfirmver(h, argp);
- case CCISS_GETDRIVVER:
- return cciss_getdrivver(h, argp);
- case CCISS_DEREGDISK:
- case CCISS_REGNEWD:
- case CCISS_REVALIDVOLS:
- return rebuild_lun_table(h, 0, 1);
- case CCISS_GETLUNINFO:
- return cciss_getluninfo(h, disk, argp);
- case CCISS_PASSTHRU:
- return cciss_passthru(h, argp);
- case CCISS_BIG_PASSTHRU:
- return cciss_bigpassthru(h, argp);
-
- /* scsi_cmd_blk_ioctl handles these, below, though some are not */
- /* very meaningful for cciss. SG_IO is the main one people want. */
-
- case SG_GET_VERSION_NUM:
- case SG_SET_TIMEOUT:
- case SG_GET_TIMEOUT:
- case SG_GET_RESERVED_SIZE:
- case SG_SET_RESERVED_SIZE:
- case SG_EMULATED_HOST:
- case SG_IO:
- case SCSI_IOCTL_SEND_COMMAND:
- return scsi_cmd_blk_ioctl(bdev, mode, cmd, argp);
-
- /* scsi_cmd_blk_ioctl would normally handle these, below, but */
- /* they aren't a good fit for cciss, as CD-ROMs are */
- /* not supported, and we don't have any bus/target/lun */
- /* which we present to the kernel. */
-
- case CDROM_SEND_PACKET:
- case CDROMCLOSETRAY:
- case CDROMEJECT:
- case SCSI_IOCTL_GET_IDLUN:
- case SCSI_IOCTL_GET_BUS_NUMBER:
- default:
- return -ENOTTY;
- }
-}
-
-static void cciss_check_queues(ctlr_info_t *h)
-{
- int start_queue = h->next_to_run;
- int i;
-
- /* check to see if we have maxed out the number of commands that can
- * be placed on the queue. If so then exit. We do this check here
- * in case the interrupt we serviced was from an ioctl and did not
- * free any new commands.
- */
- if ((find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds)) == h->nr_cmds)
- return;
-
- /* We have room on the queue for more commands. Now we need to queue
- * them up. We will also keep track of the next queue to run so
- * that every queue gets a chance to be started first.
- */
- for (i = 0; i < h->highest_lun + 1; i++) {
- int curr_queue = (start_queue + i) % (h->highest_lun + 1);
- /* make sure the disk has been added and the drive is real
- * because this can be called from the middle of init_one.
- */
- if (!h->drv[curr_queue])
- continue;
- if (!(h->drv[curr_queue]->queue) ||
- !(h->drv[curr_queue]->heads))
- continue;
- blk_start_queue(h->gendisk[curr_queue]->queue);
-
- /* check to see if we have maxed out the number of commands
- * that can be placed on the queue.
- */
- if ((find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds)) == h->nr_cmds) {
- if (curr_queue == start_queue) {
- h->next_to_run =
- (start_queue + 1) % (h->highest_lun + 1);
- break;
- } else {
- h->next_to_run = curr_queue;
- break;
- }
- }
- }
-}
-
-static void cciss_softirq_done(struct request *rq)
-{
- CommandList_struct *c = rq->completion_data;
- ctlr_info_t *h = hba[c->ctlr];
- SGDescriptor_struct *curr_sg = c->SG;
- u64bit temp64;
- unsigned long flags;
- int i, ddir;
- int sg_index = 0;
-
- if (c->Request.Type.Direction == XFER_READ)
- ddir = PCI_DMA_FROMDEVICE;
- else
- ddir = PCI_DMA_TODEVICE;
-
- /* command did not need to be retried */
- /* unmap the DMA mapping for all the scatter gather elements */
- for (i = 0; i < c->Header.SGList; i++) {
- if (curr_sg[sg_index].Ext == CCISS_SG_CHAIN) {
- cciss_unmap_sg_chain_block(h, c);
- /* Point to the next block */
- curr_sg = h->cmd_sg_list[c->cmdindex];
- sg_index = 0;
- }
- temp64.val32.lower = curr_sg[sg_index].Addr.lower;
- temp64.val32.upper = curr_sg[sg_index].Addr.upper;
- pci_unmap_page(h->pdev, temp64.val, curr_sg[sg_index].Len,
- ddir);
- ++sg_index;
- }
-
- dev_dbg(&h->pdev->dev, "Done with %p\n", rq);
-
- /* set the residual count for pc requests */
- if (blk_rq_is_passthrough(rq))
- scsi_req(rq)->resid_len = c->err_info->ResidualCnt;
- blk_end_request_all(rq, scsi_req(rq)->result ?
- BLK_STS_IOERR : BLK_STS_OK);
-
- spin_lock_irqsave(&h->lock, flags);
- cmd_free(h, c);
- cciss_check_queues(h);
- spin_unlock_irqrestore(&h->lock, flags);
-}
-
-static inline void log_unit_to_scsi3addr(ctlr_info_t *h,
- unsigned char scsi3addr[], uint32_t log_unit)
-{
- memcpy(scsi3addr, h->drv[log_unit]->LunID,
- sizeof(h->drv[log_unit]->LunID));
-}
-
-/* This function gets the SCSI vendor, model, and revision of a logical drive
- * via the inquiry page 0. Model, vendor, and rev are set to empty strings if
- * they cannot be read.
- */
-static void cciss_get_device_descr(ctlr_info_t *h, int logvol,
- char *vendor, char *model, char *rev)
-{
- int rc;
- InquiryData_struct *inq_buf;
- unsigned char scsi3addr[8];
-
- *vendor = '\0';
- *model = '\0';
- *rev = '\0';
-
- inq_buf = kzalloc(sizeof(InquiryData_struct), GFP_KERNEL);
- if (!inq_buf)
- return;
-
- log_unit_to_scsi3addr(h, scsi3addr, logvol);
- rc = sendcmd_withirq(h, CISS_INQUIRY, inq_buf, sizeof(*inq_buf), 0,
- scsi3addr, TYPE_CMD);
- if (rc == IO_OK) {
- memcpy(vendor, &inq_buf->data_byte[8], VENDOR_LEN);
- vendor[VENDOR_LEN] = '\0';
- memcpy(model, &inq_buf->data_byte[16], MODEL_LEN);
- model[MODEL_LEN] = '\0';
- memcpy(rev, &inq_buf->data_byte[32], REV_LEN);
- rev[REV_LEN] = '\0';
- }
-
- kfree(inq_buf);
- return;
-}
-
-/* This function gets the serial number of a logical drive via
- * inquiry page 0x83. Serial no. is 16 bytes. If the serial
- * number cannot be had, for whatever reason, 16 bytes of 0xff
- * are returned instead.
- */
-static void cciss_get_serial_no(ctlr_info_t *h, int logvol,
- unsigned char *serial_no, int buflen)
-{
-#define PAGE_83_INQ_BYTES 64
- int rc;
- unsigned char *buf;
- unsigned char scsi3addr[8];
-
- if (buflen > 16)
- buflen = 16;
- memset(serial_no, 0xff, buflen);
- buf = kzalloc(PAGE_83_INQ_BYTES, GFP_KERNEL);
- if (!buf)
- return;
- memset(serial_no, 0, buflen);
- log_unit_to_scsi3addr(h, scsi3addr, logvol);
- rc = sendcmd_withirq(h, CISS_INQUIRY, buf,
- PAGE_83_INQ_BYTES, 0x83, scsi3addr, TYPE_CMD);
- if (rc == IO_OK)
- memcpy(serial_no, &buf[8], buflen);
- kfree(buf);
- return;
-}
-
-static void cciss_initialize_rq(struct request *rq)
-{
- struct scsi_request *sreq = blk_mq_rq_to_pdu(rq);
-
- scsi_req_init(sreq);
-}
-
-/*
- * cciss_add_disk sets up the block device queue for a logical drive
- */
-static int cciss_add_disk(ctlr_info_t *h, struct gendisk *disk,
- int drv_index)
-{
- disk->queue = blk_alloc_queue(GFP_KERNEL);
- if (!disk->queue)
- goto init_queue_failure;
-
- disk->queue->cmd_size = sizeof(struct scsi_request);
- disk->queue->request_fn = do_cciss_request;
- disk->queue->initialize_rq_fn = cciss_initialize_rq;
- disk->queue->queue_lock = &h->lock;
- queue_flag_set_unlocked(QUEUE_FLAG_SCSI_PASSTHROUGH, disk->queue);
- if (blk_init_allocated_queue(disk->queue) < 0)
- goto cleanup_queue;
-
- sprintf(disk->disk_name, "cciss/c%dd%d", h->ctlr, drv_index);
- disk->major = h->major;
- disk->first_minor = drv_index << NWD_SHIFT;
- disk->fops = &cciss_fops;
- if (cciss_create_ld_sysfs_entry(h, drv_index))
- goto cleanup_queue;
- disk->private_data = h->drv[drv_index];
-
- /* Set up queue information */
- blk_queue_bounce_limit(disk->queue, h->pdev->dma_mask);
-
- /* This is a hardware imposed limit. */
- blk_queue_max_segments(disk->queue, h->maxsgentries);
-
- blk_queue_max_hw_sectors(disk->queue, h->cciss_max_sectors);
-
- blk_queue_softirq_done(disk->queue, cciss_softirq_done);
-
- disk->queue->queuedata = h;
-
- blk_queue_logical_block_size(disk->queue,
- h->drv[drv_index]->block_size);
-
- /* Make sure all queue data is written out before */
- /* setting h->drv[drv_index]->queue, as setting this */
- /* allows the interrupt handler to start the queue */
- wmb();
- h->drv[drv_index]->queue = disk->queue;
- device_add_disk(&h->drv[drv_index]->dev, disk);
- return 0;
-
-cleanup_queue:
- blk_cleanup_queue(disk->queue);
- disk->queue = NULL;
-init_queue_failure:
- return -1;
-}
-
-/* This function will check the usage_count of the drive to be updated/added.
- * If the usage_count is zero and it is a heretofore unknown drive, or,
- * the drive's capacity, geometry, or serial number has changed,
- * then the drive information will be updated and the disk will be
- * re-registered with the kernel. If these conditions don't hold,
- * then it will be left alone for the next reboot. The exception to this
- * is disk 0 which will always be left registered with the kernel since it
- * is also the controller node. Any changes to disk 0 will show up on
- * the next reboot.
- */
-static void cciss_update_drive_info(ctlr_info_t *h, int drv_index,
- int first_time, int via_ioctl)
-{
- struct gendisk *disk;
- InquiryData_struct *inq_buff = NULL;
- unsigned int block_size;
- sector_t total_size;
- unsigned long flags = 0;
- int ret = 0;
- drive_info_struct *drvinfo;
-
- /* Get information about the disk and modify the driver structure */
- inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL);
- drvinfo = kzalloc(sizeof(*drvinfo), GFP_KERNEL);
- if (inq_buff == NULL || drvinfo == NULL)
- goto mem_msg;
-
- /* testing to see if 16-byte CDBs are already being used */
- if (h->cciss_read == CCISS_READ_16) {
- cciss_read_capacity_16(h, drv_index,
- &total_size, &block_size);
-
- } else {
- cciss_read_capacity(h, drv_index, &total_size, &block_size);
- /* if read_capacity returns all F's this volume is >2TB */
- /* in size so we switch to 16-byte CDB's for all */
- /* read/write ops */
- if (total_size == 0xFFFFFFFFULL) {
- cciss_read_capacity_16(h, drv_index,
- &total_size, &block_size);
- h->cciss_read = CCISS_READ_16;
- h->cciss_write = CCISS_WRITE_16;
- } else {
- h->cciss_read = CCISS_READ_10;
- h->cciss_write = CCISS_WRITE_10;
- }
- }
-
- cciss_geometry_inquiry(h, drv_index, total_size, block_size,
- inq_buff, drvinfo);
- drvinfo->block_size = block_size;
- drvinfo->nr_blocks = total_size + 1;
-
- cciss_get_device_descr(h, drv_index, drvinfo->vendor,
- drvinfo->model, drvinfo->rev);
- cciss_get_serial_no(h, drv_index, drvinfo->serial_no,
- sizeof(drvinfo->serial_no));
- /* Save the lunid in case we deregister the disk, below. */
- memcpy(drvinfo->LunID, h->drv[drv_index]->LunID,
- sizeof(drvinfo->LunID));
-
- /* Is it the same disk we already know, and nothing's changed? */
- if (h->drv[drv_index]->raid_level != -1 &&
- ((memcmp(drvinfo->serial_no,
- h->drv[drv_index]->serial_no, 16) == 0) &&
- drvinfo->block_size == h->drv[drv_index]->block_size &&
- drvinfo->nr_blocks == h->drv[drv_index]->nr_blocks &&
- drvinfo->heads == h->drv[drv_index]->heads &&
- drvinfo->sectors == h->drv[drv_index]->sectors &&
- drvinfo->cylinders == h->drv[drv_index]->cylinders))
- /* The disk is unchanged, nothing to update */
- goto freeret;
-
- /* If we get here it's not the same disk, or something's changed,
- * so we need to * deregister it, and re-register it, if it's not
- * in use.
- * If the disk already exists then deregister it before proceeding
- * (unless it's the first disk (for the controller node).
- */
- if (h->drv[drv_index]->raid_level != -1 && drv_index != 0) {
- dev_warn(&h->pdev->dev, "disk %d has changed.\n", drv_index);
- spin_lock_irqsave(&h->lock, flags);
- h->drv[drv_index]->busy_configuring = 1;
- spin_unlock_irqrestore(&h->lock, flags);
-
- /* deregister_disk sets h->drv[drv_index]->queue = NULL
- * which keeps the interrupt handler from starting
- * the queue.
- */
- ret = deregister_disk(h, drv_index, 0, via_ioctl);
- }
-
- /* If the disk is in use return */
- if (ret)
- goto freeret;
-
- /* Save the new information from cciss_geometry_inquiry
- * and serial number inquiry. If the disk was deregistered
- * above, then h->drv[drv_index] will be NULL.
- */
- if (h->drv[drv_index] == NULL) {
- drvinfo->device_initialized = 0;
- h->drv[drv_index] = drvinfo;
- drvinfo = NULL; /* so it won't be freed below. */
- } else {
- /* special case for cxd0 */
- h->drv[drv_index]->block_size = drvinfo->block_size;
- h->drv[drv_index]->nr_blocks = drvinfo->nr_blocks;
- h->drv[drv_index]->heads = drvinfo->heads;
- h->drv[drv_index]->sectors = drvinfo->sectors;
- h->drv[drv_index]->cylinders = drvinfo->cylinders;
- h->drv[drv_index]->raid_level = drvinfo->raid_level;
- memcpy(h->drv[drv_index]->serial_no, drvinfo->serial_no, 16);
- memcpy(h->drv[drv_index]->vendor, drvinfo->vendor,
- VENDOR_LEN + 1);
- memcpy(h->drv[drv_index]->model, drvinfo->model, MODEL_LEN + 1);
- memcpy(h->drv[drv_index]->rev, drvinfo->rev, REV_LEN + 1);
- }
-
- ++h->num_luns;
- disk = h->gendisk[drv_index];
- set_capacity(disk, h->drv[drv_index]->nr_blocks);
-
- /* If it's not disk 0 (drv_index != 0)
- * or if it was disk 0, but there was previously
- * no actual corresponding configured logical drive
- * (raid_leve == -1) then we want to update the
- * logical drive's information.
- */
- if (drv_index || first_time) {
- if (cciss_add_disk(h, disk, drv_index) != 0) {
- cciss_free_gendisk(h, drv_index);
- cciss_free_drive_info(h, drv_index);
- dev_warn(&h->pdev->dev, "could not update disk %d\n",
- drv_index);
- --h->num_luns;
- }
- }
-
-freeret:
- kfree(inq_buff);
- kfree(drvinfo);
- return;
-mem_msg:
- dev_err(&h->pdev->dev, "out of memory\n");
- goto freeret;
-}
-
-/* This function will find the first index of the controllers drive array
- * that has a null drv pointer and allocate the drive info struct and
- * will return that index This is where new drives will be added.
- * If the index to be returned is greater than the highest_lun index for
- * the controller then highest_lun is set * to this new index.
- * If there are no available indexes or if tha allocation fails, then -1
- * is returned. * "controller_node" is used to know if this is a real
- * logical drive, or just the controller node, which determines if this
- * counts towards highest_lun.
- */
-static int cciss_alloc_drive_info(ctlr_info_t *h, int controller_node)
-{
- int i;
- drive_info_struct *drv;
-
- /* Search for an empty slot for our drive info */
- for (i = 0; i < CISS_MAX_LUN; i++) {
-
- /* if not cxd0 case, and it's occupied, skip it. */
- if (h->drv[i] && i != 0)
- continue;
- /*
- * If it's cxd0 case, and drv is alloc'ed already, and a
- * disk is configured there, skip it.
- */
- if (i == 0 && h->drv[i] && h->drv[i]->raid_level != -1)
- continue;
-
- /*
- * We've found an empty slot. Update highest_lun
- * provided this isn't just the fake cxd0 controller node.
- */
- if (i > h->highest_lun && !controller_node)
- h->highest_lun = i;
-
- /* If adding a real disk at cxd0, and it's already alloc'ed */
- if (i == 0 && h->drv[i] != NULL)
- return i;
-
- /*
- * Found an empty slot, not already alloc'ed. Allocate it.
- * Mark it with raid_level == -1, so we know it's new later on.
- */
- drv = kzalloc(sizeof(*drv), GFP_KERNEL);
- if (!drv)
- return -1;
- drv->raid_level = -1; /* so we know it's new */
- h->drv[i] = drv;
- return i;
- }
- return -1;
-}
-
-static void cciss_free_drive_info(ctlr_info_t *h, int drv_index)
-{
- kfree(h->drv[drv_index]);
- h->drv[drv_index] = NULL;
-}
-
-static void cciss_free_gendisk(ctlr_info_t *h, int drv_index)
-{
- put_disk(h->gendisk[drv_index]);
- h->gendisk[drv_index] = NULL;
-}
-
-/* cciss_add_gendisk finds a free hba[]->drv structure
- * and allocates a gendisk if needed, and sets the lunid
- * in the drvinfo structure. It returns the index into
- * the ->drv[] array, or -1 if none are free.
- * is_controller_node indicates whether highest_lun should
- * count this disk, or if it's only being added to provide
- * a means to talk to the controller in case no logical
- * drives have yet been configured.
- */
-static int cciss_add_gendisk(ctlr_info_t *h, unsigned char lunid[],
- int controller_node)
-{
- int drv_index;
-
- drv_index = cciss_alloc_drive_info(h, controller_node);
- if (drv_index == -1)
- return -1;
-
- /*Check if the gendisk needs to be allocated */
- if (!h->gendisk[drv_index]) {
- h->gendisk[drv_index] =
- alloc_disk(1 << NWD_SHIFT);
- if (!h->gendisk[drv_index]) {
- dev_err(&h->pdev->dev,
- "could not allocate a new disk %d\n",
- drv_index);
- goto err_free_drive_info;
- }
- }
- memcpy(h->drv[drv_index]->LunID, lunid,
- sizeof(h->drv[drv_index]->LunID));
- if (cciss_create_ld_sysfs_entry(h, drv_index))
- goto err_free_disk;
- /* Don't need to mark this busy because nobody */
- /* else knows about this disk yet to contend */
- /* for access to it. */
- h->drv[drv_index]->busy_configuring = 0;
- wmb();
- return drv_index;
-
-err_free_disk:
- cciss_free_gendisk(h, drv_index);
-err_free_drive_info:
- cciss_free_drive_info(h, drv_index);
- return -1;
-}
-
-/* This is for the special case of a controller which
- * has no logical drives. In this case, we still need
- * to register a disk so the controller can be accessed
- * by the Array Config Utility.
- */
-static void cciss_add_controller_node(ctlr_info_t *h)
-{
- struct gendisk *disk;
- int drv_index;
-
- if (h->gendisk[0] != NULL) /* already did this? Then bail. */
- return;
-
- drv_index = cciss_add_gendisk(h, CTLR_LUNID, 1);
- if (drv_index == -1)
- goto error;
- h->drv[drv_index]->block_size = 512;
- h->drv[drv_index]->nr_blocks = 0;
- h->drv[drv_index]->heads = 0;
- h->drv[drv_index]->sectors = 0;
- h->drv[drv_index]->cylinders = 0;
- h->drv[drv_index]->raid_level = -1;
- memset(h->drv[drv_index]->serial_no, 0, 16);
- disk = h->gendisk[drv_index];
- if (cciss_add_disk(h, disk, drv_index) == 0)
- return;
- cciss_free_gendisk(h, drv_index);
- cciss_free_drive_info(h, drv_index);
-error:
- dev_warn(&h->pdev->dev, "could not add disk 0.\n");
- return;
-}
-
-/* This function will add and remove logical drives from the Logical
- * drive array of the controller and maintain persistency of ordering
- * so that mount points are preserved until the next reboot. This allows
- * for the removal of logical drives in the middle of the drive array
- * without a re-ordering of those drives.
- * INPUT
- * h = The controller to perform the operations on
- */
-static int rebuild_lun_table(ctlr_info_t *h, int first_time,
- int via_ioctl)
-{
- int num_luns;
- ReportLunData_struct *ld_buff = NULL;
- int return_code;
- int listlength = 0;
- int i;
- int drv_found;
- int drv_index = 0;
- unsigned char lunid[8] = CTLR_LUNID;
- unsigned long flags;
-
- if (!capable(CAP_SYS_RAWIO))
- return -EPERM;
-
- /* Set busy_configuring flag for this operation */
- spin_lock_irqsave(&h->lock, flags);
- if (h->busy_configuring) {
- spin_unlock_irqrestore(&h->lock, flags);
- return -EBUSY;
- }
- h->busy_configuring = 1;
- spin_unlock_irqrestore(&h->lock, flags);
-
- ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL);
- if (ld_buff == NULL)
- goto mem_msg;
-
- return_code = sendcmd_withirq(h, CISS_REPORT_LOG, ld_buff,
- sizeof(ReportLunData_struct),
- 0, CTLR_LUNID, TYPE_CMD);
-
- if (return_code == IO_OK)
- listlength = be32_to_cpu(*(__be32 *) ld_buff->LUNListLength);
- else { /* reading number of logical volumes failed */
- dev_warn(&h->pdev->dev,
- "report logical volume command failed\n");
- listlength = 0;
- goto freeret;
- }
-
- num_luns = listlength / 8; /* 8 bytes per entry */
- if (num_luns > CISS_MAX_LUN) {
- num_luns = CISS_MAX_LUN;
- dev_warn(&h->pdev->dev, "more luns configured"
- " on controller than can be handled by"
- " this driver.\n");
- }
-
- if (num_luns == 0)
- cciss_add_controller_node(h);
-
- /* Compare controller drive array to driver's drive array
- * to see if any drives are missing on the controller due
- * to action of Array Config Utility (user deletes drive)
- * and deregister logical drives which have disappeared.
- */
- for (i = 0; i <= h->highest_lun; i++) {
- int j;
- drv_found = 0;
-
- /* skip holes in the array from already deleted drives */
- if (h->drv[i] == NULL)
- continue;
-
- for (j = 0; j < num_luns; j++) {
- memcpy(lunid, &ld_buff->LUN[j][0], sizeof(lunid));
- if (memcmp(h->drv[i]->LunID, lunid,
- sizeof(lunid)) == 0) {
- drv_found = 1;
- break;
- }
- }
- if (!drv_found) {
- /* Deregister it from the OS, it's gone. */
- spin_lock_irqsave(&h->lock, flags);
- h->drv[i]->busy_configuring = 1;
- spin_unlock_irqrestore(&h->lock, flags);
- return_code = deregister_disk(h, i, 1, via_ioctl);
- if (h->drv[i] != NULL)
- h->drv[i]->busy_configuring = 0;
- }
- }
-
- /* Compare controller drive array to driver's drive array.
- * Check for updates in the drive information and any new drives
- * on the controller due to ACU adding logical drives, or changing
- * a logical drive's size, etc. Reregister any new/changed drives
- */
- for (i = 0; i < num_luns; i++) {
- int j;
-
- drv_found = 0;
-
- memcpy(lunid, &ld_buff->LUN[i][0], sizeof(lunid));
- /* Find if the LUN is already in the drive array
- * of the driver. If so then update its info
- * if not in use. If it does not exist then find
- * the first free index and add it.
- */
- for (j = 0; j <= h->highest_lun; j++) {
- if (h->drv[j] != NULL &&
- memcmp(h->drv[j]->LunID, lunid,
- sizeof(h->drv[j]->LunID)) == 0) {
- drv_index = j;
- drv_found = 1;
- break;
- }
- }
-
- /* check if the drive was found already in the array */
- if (!drv_found) {
- drv_index = cciss_add_gendisk(h, lunid, 0);
- if (drv_index == -1)
- goto freeret;
- }
- cciss_update_drive_info(h, drv_index, first_time, via_ioctl);
- } /* end for */
-
-freeret:
- kfree(ld_buff);
- h->busy_configuring = 0;
- /* We return -1 here to tell the ACU that we have registered/updated
- * all of the drives that we can and to keep it from calling us
- * additional times.
- */
- return -1;
-mem_msg:
- dev_err(&h->pdev->dev, "out of memory\n");
- h->busy_configuring = 0;
- goto freeret;
-}
-
-static void cciss_clear_drive_info(drive_info_struct *drive_info)
-{
- /* zero out the disk size info */
- drive_info->nr_blocks = 0;
- drive_info->block_size = 0;
- drive_info->heads = 0;
- drive_info->sectors = 0;
- drive_info->cylinders = 0;
- drive_info->raid_level = -1;
- memset(drive_info->serial_no, 0, sizeof(drive_info->serial_no));
- memset(drive_info->model, 0, sizeof(drive_info->model));
- memset(drive_info->rev, 0, sizeof(drive_info->rev));
- memset(drive_info->vendor, 0, sizeof(drive_info->vendor));
- /*
- * don't clear the LUNID though, we need to remember which
- * one this one is.
- */
-}
-
-/* This function will deregister the disk and it's queue from the
- * kernel. It must be called with the controller lock held and the
- * drv structures busy_configuring flag set. It's parameters are:
- *
- * disk = This is the disk to be deregistered
- * drv = This is the drive_info_struct associated with the disk to be
- * deregistered. It contains information about the disk used
- * by the driver.
- * clear_all = This flag determines whether or not the disk information
- * is going to be completely cleared out and the highest_lun
- * reset. Sometimes we want to clear out information about
- * the disk in preparation for re-adding it. In this case
- * the highest_lun should be left unchanged and the LunID
- * should not be cleared.
- * via_ioctl
- * This indicates whether we've reached this path via ioctl.
- * This affects the maximum usage count allowed for c0d0 to be messed with.
- * If this path is reached via ioctl(), then the max_usage_count will
- * be 1, as the process calling ioctl() has got to have the device open.
- * If we get here via sysfs, then the max usage count will be zero.
-*/
-static int deregister_disk(ctlr_info_t *h, int drv_index,
- int clear_all, int via_ioctl)
-{
- int i;
- struct gendisk *disk;
- drive_info_struct *drv;
- int recalculate_highest_lun;
-
- if (!capable(CAP_SYS_RAWIO))
- return -EPERM;
-
- drv = h->drv[drv_index];
- disk = h->gendisk[drv_index];
-
- /* make sure logical volume is NOT is use */
- if (clear_all || (h->gendisk[0] == disk)) {
- if (drv->usage_count > via_ioctl)
- return -EBUSY;
- } else if (drv->usage_count > 0)
- return -EBUSY;
-
- recalculate_highest_lun = (drv == h->drv[h->highest_lun]);
-
- /* invalidate the devices and deregister the disk. If it is disk
- * zero do not deregister it but just zero out it's values. This
- * allows us to delete disk zero but keep the controller registered.
- */
- if (h->gendisk[0] != disk) {
- struct request_queue *q = disk->queue;
- if (disk->flags & GENHD_FL_UP) {
- cciss_destroy_ld_sysfs_entry(h, drv_index, 0);
- del_gendisk(disk);
- }
- if (q)
- blk_cleanup_queue(q);
- /* If clear_all is set then we are deleting the logical
- * drive, not just refreshing its info. For drives
- * other than disk 0 we will call put_disk. We do not
- * do this for disk 0 as we need it to be able to
- * configure the controller.
- */
- if (clear_all){
- /* This isn't pretty, but we need to find the
- * disk in our array and NULL our the pointer.
- * This is so that we will call alloc_disk if
- * this index is used again later.
- */
- for (i=0; i < CISS_MAX_LUN; i++){
- if (h->gendisk[i] == disk) {
- h->gendisk[i] = NULL;
- break;
- }
- }
- put_disk(disk);
- }
- } else {
- set_capacity(disk, 0);
- cciss_clear_drive_info(drv);
- }
-
- --h->num_luns;
-
- /* if it was the last disk, find the new hightest lun */
- if (clear_all && recalculate_highest_lun) {
- int newhighest = -1;
- for (i = 0; i <= h->highest_lun; i++) {
- /* if the disk has size > 0, it is available */
- if (h->drv[i] && h->drv[i]->heads)
- newhighest = i;
- }
- h->highest_lun = newhighest;
- }
- return 0;
-}
-
-static int fill_cmd(ctlr_info_t *h, CommandList_struct *c, __u8 cmd, void *buff,
- size_t size, __u8 page_code, unsigned char *scsi3addr,
- int cmd_type)
-{
- u64bit buff_dma_handle;
- int status = IO_OK;
-
- c->cmd_type = CMD_IOCTL_PEND;
- c->Header.ReplyQueue = 0;
- if (buff != NULL) {
- c->Header.SGList = 1;
- c->Header.SGTotal = 1;
- } else {
- c->Header.SGList = 0;
- c->Header.SGTotal = 0;
- }
- c->Header.Tag.lower = c->busaddr;
- memcpy(c->Header.LUN.LunAddrBytes, scsi3addr, 8);
-
- c->Request.Type.Type = cmd_type;
- if (cmd_type == TYPE_CMD) {
- switch (cmd) {
- case CISS_INQUIRY:
- /* are we trying to read a vital product page */
- if (page_code != 0) {
- c->Request.CDB[1] = 0x01;
- c->Request.CDB[2] = page_code;
- }
- c->Request.CDBLen = 6;
- c->Request.Type.Attribute = ATTR_SIMPLE;
- c->Request.Type.Direction = XFER_READ;
- c->Request.Timeout = 0;
- c->Request.CDB[0] = CISS_INQUIRY;
- c->Request.CDB[4] = size & 0xFF;
- break;
- case CISS_REPORT_LOG:
- case CISS_REPORT_PHYS:
- /* Talking to controller so It's a physical command
- mode = 00 target = 0. Nothing to write.
- */
- c->Request.CDBLen = 12;
- c->Request.Type.Attribute = ATTR_SIMPLE;
- c->Request.Type.Direction = XFER_READ;
- c->Request.Timeout = 0;
- c->Request.CDB[0] = cmd;
- c->Request.CDB[6] = (size >> 24) & 0xFF; /* MSB */
- c->Request.CDB[7] = (size >> 16) & 0xFF;
- c->Request.CDB[8] = (size >> 8) & 0xFF;
- c->Request.CDB[9] = size & 0xFF;
- break;
-
- case CCISS_READ_CAPACITY:
- c->Request.CDBLen = 10;
- c->Request.Type.Attribute = ATTR_SIMPLE;
- c->Request.Type.Direction = XFER_READ;
- c->Request.Timeout = 0;
- c->Request.CDB[0] = cmd;
- break;
- case CCISS_READ_CAPACITY_16:
- c->Request.CDBLen = 16;
- c->Request.Type.Attribute = ATTR_SIMPLE;
- c->Request.Type.Direction = XFER_READ;
- c->Request.Timeout = 0;
- c->Request.CDB[0] = cmd;
- c->Request.CDB[1] = 0x10;
- c->Request.CDB[10] = (size >> 24) & 0xFF;
- c->Request.CDB[11] = (size >> 16) & 0xFF;
- c->Request.CDB[12] = (size >> 8) & 0xFF;
- c->Request.CDB[13] = size & 0xFF;
- c->Request.Timeout = 0;
- c->Request.CDB[0] = cmd;
- break;
- case CCISS_CACHE_FLUSH:
- c->Request.CDBLen = 12;
- c->Request.Type.Attribute = ATTR_SIMPLE;
- c->Request.Type.Direction = XFER_WRITE;
- c->Request.Timeout = 0;
- c->Request.CDB[0] = BMIC_WRITE;
- c->Request.CDB[6] = BMIC_CACHE_FLUSH;
- c->Request.CDB[7] = (size >> 8) & 0xFF;
- c->Request.CDB[8] = size & 0xFF;
- break;
- case TEST_UNIT_READY:
- c->Request.CDBLen = 6;
- c->Request.Type.Attribute = ATTR_SIMPLE;
- c->Request.Type.Direction = XFER_NONE;
- c->Request.Timeout = 0;
- break;
- default:
- dev_warn(&h->pdev->dev, "Unknown Command 0x%c\n", cmd);
- return IO_ERROR;
- }
- } else if (cmd_type == TYPE_MSG) {
- switch (cmd) {
- case CCISS_ABORT_MSG:
- c->Request.CDBLen = 12;
- c->Request.Type.Attribute = ATTR_SIMPLE;
- c->Request.Type.Direction = XFER_WRITE;
- c->Request.Timeout = 0;
- c->Request.CDB[0] = cmd; /* abort */
- c->Request.CDB[1] = 0; /* abort a command */
- /* buff contains the tag of the command to abort */
- memcpy(&c->Request.CDB[4], buff, 8);
- break;
- case CCISS_RESET_MSG:
- c->Request.CDBLen = 16;
- c->Request.Type.Attribute = ATTR_SIMPLE;
- c->Request.Type.Direction = XFER_NONE;
- c->Request.Timeout = 0;
- memset(&c->Request.CDB[0], 0, sizeof(c->Request.CDB));
- c->Request.CDB[0] = cmd; /* reset */
- c->Request.CDB[1] = CCISS_RESET_TYPE_TARGET;
- break;
- case CCISS_NOOP_MSG:
- c->Request.CDBLen = 1;
- c->Request.Type.Attribute = ATTR_SIMPLE;
- c->Request.Type.Direction = XFER_WRITE;
- c->Request.Timeout = 0;
- c->Request.CDB[0] = cmd;
- break;
- default:
- dev_warn(&h->pdev->dev,
- "unknown message type %d\n", cmd);
- return IO_ERROR;
- }
- } else {
- dev_warn(&h->pdev->dev, "unknown command type %d\n", cmd_type);
- return IO_ERROR;
- }
- /* Fill in the scatter gather information */
- if (size > 0) {
- buff_dma_handle.val = (__u64) pci_map_single(h->pdev,
- buff, size,
- PCI_DMA_BIDIRECTIONAL);
- c->SG[0].Addr.lower = buff_dma_handle.val32.lower;
- c->SG[0].Addr.upper = buff_dma_handle.val32.upper;
- c->SG[0].Len = size;
- c->SG[0].Ext = 0; /* we are not chaining */
- }
- return status;
-}
-
-static int cciss_send_reset(ctlr_info_t *h, unsigned char *scsi3addr,
- u8 reset_type)
-{
- CommandList_struct *c;
- int return_status;
-
- c = cmd_alloc(h);
- if (!c)
- return -ENOMEM;
- return_status = fill_cmd(h, c, CCISS_RESET_MSG, NULL, 0, 0,
- CTLR_LUNID, TYPE_MSG);
- c->Request.CDB[1] = reset_type; /* fill_cmd defaults to target reset */
- if (return_status != IO_OK) {
- cmd_special_free(h, c);
- return return_status;
- }
- c->waiting = NULL;
- enqueue_cmd_and_start_io(h, c);
- /* Don't wait for completion, the reset won't complete. Don't free
- * the command either. This is the last command we will send before
- * re-initializing everything, so it doesn't matter and won't leak.
- */
- return 0;
-}
-
-static int check_target_status(ctlr_info_t *h, CommandList_struct *c)
-{
- switch (c->err_info->ScsiStatus) {
- case SAM_STAT_GOOD:
- return IO_OK;
- case SAM_STAT_CHECK_CONDITION:
- switch (0xf & c->err_info->SenseInfo[2]) {
- case 0: return IO_OK; /* no sense */
- case 1: return IO_OK; /* recovered error */
- default:
- if (check_for_unit_attention(h, c))
- return IO_NEEDS_RETRY;
- dev_warn(&h->pdev->dev, "cmd 0x%02x "
- "check condition, sense key = 0x%02x\n",
- c->Request.CDB[0], c->err_info->SenseInfo[2]);
- }
- break;
- default:
- dev_warn(&h->pdev->dev, "cmd 0x%02x"
- "scsi status = 0x%02x\n",
- c->Request.CDB[0], c->err_info->ScsiStatus);
- break;
- }
- return IO_ERROR;
-}
-
-static int process_sendcmd_error(ctlr_info_t *h, CommandList_struct *c)
-{
- int return_status = IO_OK;
-
- if (c->err_info->CommandStatus == CMD_SUCCESS)
- return IO_OK;
-
- switch (c->err_info->CommandStatus) {
- case CMD_TARGET_STATUS:
- return_status = check_target_status(h, c);
- break;
- case CMD_DATA_UNDERRUN:
- case CMD_DATA_OVERRUN:
- /* expected for inquiry and report lun commands */
- break;
- case CMD_INVALID:
- dev_warn(&h->pdev->dev, "cmd 0x%02x is "
- "reported invalid\n", c->Request.CDB[0]);
- return_status = IO_ERROR;
- break;
- case CMD_PROTOCOL_ERR:
- dev_warn(&h->pdev->dev, "cmd 0x%02x has "
- "protocol error\n", c->Request.CDB[0]);
- return_status = IO_ERROR;
- break;
- case CMD_HARDWARE_ERR:
- dev_warn(&h->pdev->dev, "cmd 0x%02x had "
- " hardware error\n", c->Request.CDB[0]);
- return_status = IO_ERROR;
- break;
- case CMD_CONNECTION_LOST:
- dev_warn(&h->pdev->dev, "cmd 0x%02x had "
- "connection lost\n", c->Request.CDB[0]);
- return_status = IO_ERROR;
- break;
- case CMD_ABORTED:
- dev_warn(&h->pdev->dev, "cmd 0x%02x was "
- "aborted\n", c->Request.CDB[0]);
- return_status = IO_ERROR;
- break;
- case CMD_ABORT_FAILED:
- dev_warn(&h->pdev->dev, "cmd 0x%02x reports "
- "abort failed\n", c->Request.CDB[0]);
- return_status = IO_ERROR;
- break;
- case CMD_UNSOLICITED_ABORT:
- dev_warn(&h->pdev->dev, "unsolicited abort 0x%02x\n",
- c->Request.CDB[0]);
- return_status = IO_NEEDS_RETRY;
- break;
- case CMD_UNABORTABLE:
- dev_warn(&h->pdev->dev, "cmd unabortable\n");
- return_status = IO_ERROR;
- break;
- default:
- dev_warn(&h->pdev->dev, "cmd 0x%02x returned "
- "unknown status %x\n", c->Request.CDB[0],
- c->err_info->CommandStatus);
- return_status = IO_ERROR;
- }
- return return_status;
-}
-
-static int sendcmd_withirq_core(ctlr_info_t *h, CommandList_struct *c,
- int attempt_retry)
-{
- DECLARE_COMPLETION_ONSTACK(wait);
- u64bit buff_dma_handle;
- int return_status = IO_OK;
-
-resend_cmd2:
- c->waiting = &wait;
- enqueue_cmd_and_start_io(h, c);
-
- wait_for_completion(&wait);
-
- if (c->err_info->CommandStatus == 0 || !attempt_retry)
- goto command_done;
-
- return_status = process_sendcmd_error(h, c);
-
- if (return_status == IO_NEEDS_RETRY &&
- c->retry_count < MAX_CMD_RETRIES) {
- dev_warn(&h->pdev->dev, "retrying 0x%02x\n",
- c->Request.CDB[0]);
- c->retry_count++;
- /* erase the old error information */
- memset(c->err_info, 0, sizeof(ErrorInfo_struct));
- return_status = IO_OK;
- reinit_completion(&wait);
- goto resend_cmd2;
- }
-
-command_done:
- /* unlock the buffers from DMA */
- buff_dma_handle.val32.lower = c->SG[0].Addr.lower;
- buff_dma_handle.val32.upper = c->SG[0].Addr.upper;
- pci_unmap_single(h->pdev, (dma_addr_t) buff_dma_handle.val,
- c->SG[0].Len, PCI_DMA_BIDIRECTIONAL);
- return return_status;
-}
-
-static int sendcmd_withirq(ctlr_info_t *h, __u8 cmd, void *buff, size_t size,
- __u8 page_code, unsigned char scsi3addr[],
- int cmd_type)
-{
- CommandList_struct *c;
- int return_status;
-
- c = cmd_special_alloc(h);
- if (!c)
- return -ENOMEM;
- return_status = fill_cmd(h, c, cmd, buff, size, page_code,
- scsi3addr, cmd_type);
- if (return_status == IO_OK)
- return_status = sendcmd_withirq_core(h, c, 1);
-
- cmd_special_free(h, c);
- return return_status;
-}
-
-static void cciss_geometry_inquiry(ctlr_info_t *h, int logvol,
- sector_t total_size,
- unsigned int block_size,
- InquiryData_struct *inq_buff,
- drive_info_struct *drv)
-{
- int return_code;
- unsigned long t;
- unsigned char scsi3addr[8];
-
- memset(inq_buff, 0, sizeof(InquiryData_struct));
- log_unit_to_scsi3addr(h, scsi3addr, logvol);
- return_code = sendcmd_withirq(h, CISS_INQUIRY, inq_buff,
- sizeof(*inq_buff), 0xC1, scsi3addr, TYPE_CMD);
- if (return_code == IO_OK) {
- if (inq_buff->data_byte[8] == 0xFF) {
- dev_warn(&h->pdev->dev,
- "reading geometry failed, volume "
- "does not support reading geometry\n");
- drv->heads = 255;
- drv->sectors = 32; /* Sectors per track */
- drv->cylinders = total_size + 1;
- drv->raid_level = RAID_UNKNOWN;
- } else {
- drv->heads = inq_buff->data_byte[6];
- drv->sectors = inq_buff->data_byte[7];
- drv->cylinders = (inq_buff->data_byte[4] & 0xff) << 8;
- drv->cylinders += inq_buff->data_byte[5];
- drv->raid_level = inq_buff->data_byte[8];
- }
- drv->block_size = block_size;
- drv->nr_blocks = total_size + 1;
- t = drv->heads * drv->sectors;
- if (t > 1) {
- sector_t real_size = total_size + 1;
- unsigned long rem = sector_div(real_size, t);
- if (rem)
- real_size++;
- drv->cylinders = real_size;
- }
- } else { /* Get geometry failed */
- dev_warn(&h->pdev->dev, "reading geometry failed\n");
- }
-}
-
-static void
-cciss_read_capacity(ctlr_info_t *h, int logvol, sector_t *total_size,
- unsigned int *block_size)
-{
- ReadCapdata_struct *buf;
- int return_code;
- unsigned char scsi3addr[8];
-
- buf = kzalloc(sizeof(ReadCapdata_struct), GFP_KERNEL);
- if (!buf) {
- dev_warn(&h->pdev->dev, "out of memory\n");
- return;
- }
-
- log_unit_to_scsi3addr(h, scsi3addr, logvol);
- return_code = sendcmd_withirq(h, CCISS_READ_CAPACITY, buf,
- sizeof(ReadCapdata_struct), 0, scsi3addr, TYPE_CMD);
- if (return_code == IO_OK) {
- *total_size = be32_to_cpu(*(__be32 *) buf->total_size);
- *block_size = be32_to_cpu(*(__be32 *) buf->block_size);
- } else { /* read capacity command failed */
- dev_warn(&h->pdev->dev, "read capacity failed\n");
- *total_size = 0;
- *block_size = BLOCK_SIZE;
- }
- kfree(buf);
-}
-
-static void cciss_read_capacity_16(ctlr_info_t *h, int logvol,
- sector_t *total_size, unsigned int *block_size)
-{
- ReadCapdata_struct_16 *buf;
- int return_code;
- unsigned char scsi3addr[8];
-
- buf = kzalloc(sizeof(ReadCapdata_struct_16), GFP_KERNEL);
- if (!buf) {
- dev_warn(&h->pdev->dev, "out of memory\n");
- return;
- }
-
- log_unit_to_scsi3addr(h, scsi3addr, logvol);
- return_code = sendcmd_withirq(h, CCISS_READ_CAPACITY_16,
- buf, sizeof(ReadCapdata_struct_16),
- 0, scsi3addr, TYPE_CMD);
- if (return_code == IO_OK) {
- *total_size = be64_to_cpu(*(__be64 *) buf->total_size);
- *block_size = be32_to_cpu(*(__be32 *) buf->block_size);
- } else { /* read capacity command failed */
- dev_warn(&h->pdev->dev, "read capacity failed\n");
- *total_size = 0;
- *block_size = BLOCK_SIZE;
- }
- dev_info(&h->pdev->dev, " blocks= %llu block_size= %d\n",
- (unsigned long long)*total_size+1, *block_size);
- kfree(buf);
-}
-
-static int cciss_revalidate(struct gendisk *disk)
-{
- ctlr_info_t *h = get_host(disk);
- drive_info_struct *drv = get_drv(disk);
- int logvol;
- int FOUND = 0;
- unsigned int block_size;
- sector_t total_size;
- InquiryData_struct *inq_buff = NULL;
-
- for (logvol = 0; logvol <= h->highest_lun; logvol++) {
- if (!h->drv[logvol])
- continue;
- if (memcmp(h->drv[logvol]->LunID, drv->LunID,
- sizeof(drv->LunID)) == 0) {
- FOUND = 1;
- break;
- }
- }
-
- if (!FOUND)
- return 1;
-
- inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL);
- if (inq_buff == NULL) {
- dev_warn(&h->pdev->dev, "out of memory\n");
- return 1;
- }
- if (h->cciss_read == CCISS_READ_10) {
- cciss_read_capacity(h, logvol,
- &total_size, &block_size);
- } else {
- cciss_read_capacity_16(h, logvol,
- &total_size, &block_size);
- }
- cciss_geometry_inquiry(h, logvol, total_size, block_size,
- inq_buff, drv);
-
- blk_queue_logical_block_size(drv->queue, drv->block_size);
- set_capacity(disk, drv->nr_blocks);
-
- kfree(inq_buff);
- return 0;
-}
-
-/*
- * Map (physical) PCI mem into (virtual) kernel space
- */
-static void __iomem *remap_pci_mem(ulong base, ulong size)
-{
- ulong page_base = ((ulong) base) & PAGE_MASK;
- ulong page_offs = ((ulong) base) - page_base;
- void __iomem *page_remapped = ioremap(page_base, page_offs + size);
-
- return page_remapped ? (page_remapped + page_offs) : NULL;
-}
-
-/*
- * Takes jobs of the Q and sends them to the hardware, then puts it on
- * the Q to wait for completion.
- */
-static void start_io(ctlr_info_t *h)
-{
- CommandList_struct *c;
-
- while (!list_empty(&h->reqQ)) {
- c = list_entry(h->reqQ.next, CommandList_struct, list);
- /* can't do anything if fifo is full */
- if ((h->access.fifo_full(h))) {
- dev_warn(&h->pdev->dev, "fifo full\n");
- break;
- }
-
- /* Get the first entry from the Request Q */
- removeQ(c);
- h->Qdepth--;
-
- /* Tell the controller execute command */
- h->access.submit_command(h, c);
-
- /* Put job onto the completed Q */
- addQ(&h->cmpQ, c);
- }
-}
-
-/* Assumes that h->lock is held. */
-/* Zeros out the error record and then resends the command back */
-/* to the controller */
-static inline void resend_cciss_cmd(ctlr_info_t *h, CommandList_struct *c)
-{
- /* erase the old error information */
- memset(c->err_info, 0, sizeof(ErrorInfo_struct));
-
- /* add it to software queue and then send it to the controller */
- addQ(&h->reqQ, c);
- h->Qdepth++;
- if (h->Qdepth > h->maxQsinceinit)
- h->maxQsinceinit = h->Qdepth;
-
- start_io(h);
-}
-
-static inline unsigned int make_status_bytes(unsigned int scsi_status_byte,
- unsigned int msg_byte, unsigned int host_byte,
- unsigned int driver_byte)
-{
- /* inverse of macros in scsi.h */
- return (scsi_status_byte & 0xff) |
- ((msg_byte & 0xff) << 8) |
- ((host_byte & 0xff) << 16) |
- ((driver_byte & 0xff) << 24);
-}
-
-static inline int evaluate_target_status(ctlr_info_t *h,
- CommandList_struct *cmd, int *retry_cmd)
-{
- unsigned char sense_key;
- unsigned char status_byte, msg_byte, host_byte, driver_byte;
- int error_value;
-
- *retry_cmd = 0;
- /* If we get in here, it means we got "target status", that is, scsi status */
- status_byte = cmd->err_info->ScsiStatus;
- driver_byte = DRIVER_OK;
- msg_byte = cmd->err_info->CommandStatus; /* correct? seems too device specific */
-
- if (blk_rq_is_passthrough(cmd->rq))
- host_byte = DID_PASSTHROUGH;
- else
- host_byte = DID_OK;
-
- error_value = make_status_bytes(status_byte, msg_byte,
- host_byte, driver_byte);
-
- if (cmd->err_info->ScsiStatus != SAM_STAT_CHECK_CONDITION) {
- if (!blk_rq_is_passthrough(cmd->rq))
- dev_warn(&h->pdev->dev, "cmd %p "
- "has SCSI Status 0x%x\n",
- cmd, cmd->err_info->ScsiStatus);
- return error_value;
- }
-
- /* check the sense key */
- sense_key = 0xf & cmd->err_info->SenseInfo[2];
- /* no status or recovered error */
- if (((sense_key == 0x0) || (sense_key == 0x1)) &&
- !blk_rq_is_passthrough(cmd->rq))
- error_value = 0;
-
- if (check_for_unit_attention(h, cmd)) {
- *retry_cmd = !blk_rq_is_passthrough(cmd->rq);
- return 0;
- }
-
- /* Not SG_IO or similar? */
- if (!blk_rq_is_passthrough(cmd->rq)) {
- if (error_value != 0)
- dev_warn(&h->pdev->dev, "cmd %p has CHECK CONDITION"
- " sense key = 0x%x\n", cmd, sense_key);
- return error_value;
- }
-
- scsi_req(cmd->rq)->sense_len = cmd->err_info->SenseLen;
- return error_value;
-}
-
-/* checks the status of the job and calls complete buffers to mark all
- * buffers for the completed job. Note that this function does not need
- * to hold the hba/queue lock.
- */
-static inline void complete_command(ctlr_info_t *h, CommandList_struct *cmd,
- int timeout)
-{
- int retry_cmd = 0;
- struct request *rq = cmd->rq;
- struct scsi_request *sreq = scsi_req(rq);
-
- sreq->result = 0;
-
- if (timeout)
- sreq->result = make_status_bytes(0, 0, 0, DRIVER_TIMEOUT);
-
- if (cmd->err_info->CommandStatus == 0) /* no error has occurred */
- goto after_error_processing;
-
- switch (cmd->err_info->CommandStatus) {
- case CMD_TARGET_STATUS:
- sreq->result = evaluate_target_status(h, cmd, &retry_cmd);
- break;
- case CMD_DATA_UNDERRUN:
- if (!blk_rq_is_passthrough(cmd->rq)) {
- dev_warn(&h->pdev->dev, "cmd %p has"
- " completed with data underrun "
- "reported\n", cmd);
- }
- break;
- case CMD_DATA_OVERRUN:
- if (!blk_rq_is_passthrough(cmd->rq))
- dev_warn(&h->pdev->dev, "cciss: cmd %p has"
- " completed with data overrun "
- "reported\n", cmd);
- break;
- case CMD_INVALID:
- dev_warn(&h->pdev->dev, "cciss: cmd %p is "
- "reported invalid\n", cmd);
- sreq->result = make_status_bytes(SAM_STAT_GOOD,
- cmd->err_info->CommandStatus, DRIVER_OK,
- blk_rq_is_passthrough(cmd->rq) ?
- DID_PASSTHROUGH : DID_ERROR);
- break;
- case CMD_PROTOCOL_ERR:
- dev_warn(&h->pdev->dev, "cciss: cmd %p has "
- "protocol error\n", cmd);
- sreq->result = make_status_bytes(SAM_STAT_GOOD,
- cmd->err_info->CommandStatus, DRIVER_OK,
- blk_rq_is_passthrough(cmd->rq) ?
- DID_PASSTHROUGH : DID_ERROR);
- break;
- case CMD_HARDWARE_ERR:
- dev_warn(&h->pdev->dev, "cciss: cmd %p had "
- " hardware error\n", cmd);
- sreq->result = make_status_bytes(SAM_STAT_GOOD,
- cmd->err_info->CommandStatus, DRIVER_OK,
- blk_rq_is_passthrough(cmd->rq) ?
- DID_PASSTHROUGH : DID_ERROR);
- break;
- case CMD_CONNECTION_LOST:
- dev_warn(&h->pdev->dev, "cciss: cmd %p had "
- "connection lost\n", cmd);
- sreq->result = make_status_bytes(SAM_STAT_GOOD,
- cmd->err_info->CommandStatus, DRIVER_OK,
- blk_rq_is_passthrough(cmd->rq) ?
- DID_PASSTHROUGH : DID_ERROR);
- break;
- case CMD_ABORTED:
- dev_warn(&h->pdev->dev, "cciss: cmd %p was "
- "aborted\n", cmd);
- sreq->result = make_status_bytes(SAM_STAT_GOOD,
- cmd->err_info->CommandStatus, DRIVER_OK,
- blk_rq_is_passthrough(cmd->rq) ?
- DID_PASSTHROUGH : DID_ABORT);
- break;
- case CMD_ABORT_FAILED:
- dev_warn(&h->pdev->dev, "cciss: cmd %p reports "
- "abort failed\n", cmd);
- sreq->result = make_status_bytes(SAM_STAT_GOOD,
- cmd->err_info->CommandStatus, DRIVER_OK,
- blk_rq_is_passthrough(cmd->rq) ?
- DID_PASSTHROUGH : DID_ERROR);
- break;
- case CMD_UNSOLICITED_ABORT:
- dev_warn(&h->pdev->dev, "cciss%d: unsolicited "
- "abort %p\n", h->ctlr, cmd);
- if (cmd->retry_count < MAX_CMD_RETRIES) {
- retry_cmd = 1;
- dev_warn(&h->pdev->dev, "retrying %p\n", cmd);
- cmd->retry_count++;
- } else
- dev_warn(&h->pdev->dev,
- "%p retried too many times\n", cmd);
- sreq->result = make_status_bytes(SAM_STAT_GOOD,
- cmd->err_info->CommandStatus, DRIVER_OK,
- blk_rq_is_passthrough(cmd->rq) ?
- DID_PASSTHROUGH : DID_ABORT);
- break;
- case CMD_TIMEOUT:
- dev_warn(&h->pdev->dev, "cmd %p timedout\n", cmd);
- sreq->result = make_status_bytes(SAM_STAT_GOOD,
- cmd->err_info->CommandStatus, DRIVER_OK,
- blk_rq_is_passthrough(cmd->rq) ?
- DID_PASSTHROUGH : DID_ERROR);
- break;
- case CMD_UNABORTABLE:
- dev_warn(&h->pdev->dev, "cmd %p unabortable\n", cmd);
- sreq->result = make_status_bytes(SAM_STAT_GOOD,
- cmd->err_info->CommandStatus, DRIVER_OK,
- blk_rq_is_passthrough(cmd->rq) ?
- DID_PASSTHROUGH : DID_ERROR);
- break;
- default:
- dev_warn(&h->pdev->dev, "cmd %p returned "
- "unknown status %x\n", cmd,
- cmd->err_info->CommandStatus);
- sreq->result = make_status_bytes(SAM_STAT_GOOD,
- cmd->err_info->CommandStatus, DRIVER_OK,
- blk_rq_is_passthrough(cmd->rq) ?
- DID_PASSTHROUGH : DID_ERROR);
- }
-
-after_error_processing:
-
- /* We need to return this command */
- if (retry_cmd) {
- resend_cciss_cmd(h, cmd);
- return;
- }
- cmd->rq->completion_data = cmd;
- blk_complete_request(cmd->rq);
-}
-
-static inline u32 cciss_tag_contains_index(u32 tag)
-{
-#define DIRECT_LOOKUP_BIT 0x10
- return tag & DIRECT_LOOKUP_BIT;
-}
-
-static inline u32 cciss_tag_to_index(u32 tag)
-{
-#define DIRECT_LOOKUP_SHIFT 5
- return tag >> DIRECT_LOOKUP_SHIFT;
-}
-
-static inline u32 cciss_tag_discard_error_bits(ctlr_info_t *h, u32 tag)
-{
-#define CCISS_PERF_ERROR_BITS ((1 << DIRECT_LOOKUP_SHIFT) - 1)
-#define CCISS_SIMPLE_ERROR_BITS 0x03
- if (likely(h->transMethod & CFGTBL_Trans_Performant))
- return tag & ~CCISS_PERF_ERROR_BITS;
- return tag & ~CCISS_SIMPLE_ERROR_BITS;
-}
-
-static inline void cciss_mark_tag_indexed(u32 *tag)
-{
- *tag |= DIRECT_LOOKUP_BIT;
-}
-
-static inline void cciss_set_tag_index(u32 *tag, u32 index)
-{
- *tag |= (index << DIRECT_LOOKUP_SHIFT);
-}
-
-/*
- * Get a request and submit it to the controller.
- */
-static void do_cciss_request(struct request_queue *q)
-{
- ctlr_info_t *h = q->queuedata;
- CommandList_struct *c;
- sector_t start_blk;
- int seg;
- struct request *creq;
- u64bit temp64;
- struct scatterlist *tmp_sg;
- SGDescriptor_struct *curr_sg;
- drive_info_struct *drv;
- int i, dir;
- int sg_index = 0;
- int chained = 0;
-
- queue:
- creq = blk_peek_request(q);
- if (!creq)
- goto startio;
-
- BUG_ON(creq->nr_phys_segments > h->maxsgentries);
-
- c = cmd_alloc(h);
- if (!c)
- goto full;
-
- blk_start_request(creq);
-
- tmp_sg = h->scatter_list[c->cmdindex];
- spin_unlock_irq(q->queue_lock);
-
- c->cmd_type = CMD_RWREQ;
- c->rq = creq;
-
- /* fill in the request */
- drv = creq->rq_disk->private_data;
- c->Header.ReplyQueue = 0; /* unused in simple mode */
- /* got command from pool, so use the command block index instead */
- /* for direct lookups. */
- /* The first 2 bits are reserved for controller error reporting. */
- cciss_set_tag_index(&c->Header.Tag.lower, c->cmdindex);
- cciss_mark_tag_indexed(&c->Header.Tag.lower);
- memcpy(&c->Header.LUN, drv->LunID, sizeof(drv->LunID));
- c->Request.CDBLen = 10; /* 12 byte commands not in FW yet; */
- c->Request.Type.Type = TYPE_CMD; /* It is a command. */
- c->Request.Type.Attribute = ATTR_SIMPLE;
- c->Request.Type.Direction =
- (rq_data_dir(creq) == READ) ? XFER_READ : XFER_WRITE;
- c->Request.Timeout = 0; /* Don't time out */
- c->Request.CDB[0] =
- (rq_data_dir(creq) == READ) ? h->cciss_read : h->cciss_write;
- start_blk = blk_rq_pos(creq);
- dev_dbg(&h->pdev->dev, "sector =%d nr_sectors=%d\n",
- (int)blk_rq_pos(creq), (int)blk_rq_sectors(creq));
- sg_init_table(tmp_sg, h->maxsgentries);
- seg = blk_rq_map_sg(q, creq, tmp_sg);
-
- /* get the DMA records for the setup */
- if (c->Request.Type.Direction == XFER_READ)
- dir = PCI_DMA_FROMDEVICE;
- else
- dir = PCI_DMA_TODEVICE;
-
- curr_sg = c->SG;
- sg_index = 0;
- chained = 0;
-
- for (i = 0; i < seg; i++) {
- if (((sg_index+1) == (h->max_cmd_sgentries)) &&
- !chained && ((seg - i) > 1)) {
- /* Point to next chain block. */
- curr_sg = h->cmd_sg_list[c->cmdindex];
- sg_index = 0;
- chained = 1;
- }
- curr_sg[sg_index].Len = tmp_sg[i].length;
- temp64.val = (__u64) pci_map_page(h->pdev, sg_page(&tmp_sg[i]),
- tmp_sg[i].offset,
- tmp_sg[i].length, dir);
- if (dma_mapping_error(&h->pdev->dev, temp64.val)) {
- dev_warn(&h->pdev->dev,
- "%s: error mapping page for DMA\n", __func__);
- scsi_req(creq)->result =
- make_status_bytes(SAM_STAT_GOOD, 0, DRIVER_OK,
- DID_SOFT_ERROR);
- cmd_free(h, c);
- return;
- }
- curr_sg[sg_index].Addr.lower = temp64.val32.lower;
- curr_sg[sg_index].Addr.upper = temp64.val32.upper;
- curr_sg[sg_index].Ext = 0; /* we are not chaining */
- ++sg_index;
- }
- if (chained) {
- if (cciss_map_sg_chain_block(h, c, h->cmd_sg_list[c->cmdindex],
- (seg - (h->max_cmd_sgentries - 1)) *
- sizeof(SGDescriptor_struct))) {
- scsi_req(creq)->result =
- make_status_bytes(SAM_STAT_GOOD, 0, DRIVER_OK,
- DID_SOFT_ERROR);
- cmd_free(h, c);
- return;
- }
- }
-
- /* track how many SG entries we are using */
- if (seg > h->maxSG)
- h->maxSG = seg;
-
- dev_dbg(&h->pdev->dev, "Submitting %u sectors in %d segments "
- "chained[%d]\n",
- blk_rq_sectors(creq), seg, chained);
-
- c->Header.SGTotal = seg + chained;
- if (seg <= h->max_cmd_sgentries)
- c->Header.SGList = c->Header.SGTotal;
- else
- c->Header.SGList = h->max_cmd_sgentries;
- set_performant_mode(h, c);
-
- switch (req_op(creq)) {
- case REQ_OP_READ:
- case REQ_OP_WRITE:
- if(h->cciss_read == CCISS_READ_10) {
- c->Request.CDB[1] = 0;
- c->Request.CDB[2] = (start_blk >> 24) & 0xff; /* MSB */
- c->Request.CDB[3] = (start_blk >> 16) & 0xff;
- c->Request.CDB[4] = (start_blk >> 8) & 0xff;
- c->Request.CDB[5] = start_blk & 0xff;
- c->Request.CDB[6] = 0; /* (sect >> 24) & 0xff; MSB */
- c->Request.CDB[7] = (blk_rq_sectors(creq) >> 8) & 0xff;
- c->Request.CDB[8] = blk_rq_sectors(creq) & 0xff;
- c->Request.CDB[9] = c->Request.CDB[11] = c->Request.CDB[12] = 0;
- } else {
- u32 upper32 = upper_32_bits(start_blk);
-
- c->Request.CDBLen = 16;
- c->Request.CDB[1]= 0;
- c->Request.CDB[2]= (upper32 >> 24) & 0xff; /* MSB */
- c->Request.CDB[3]= (upper32 >> 16) & 0xff;
- c->Request.CDB[4]= (upper32 >> 8) & 0xff;
- c->Request.CDB[5]= upper32 & 0xff;
- c->Request.CDB[6]= (start_blk >> 24) & 0xff;
- c->Request.CDB[7]= (start_blk >> 16) & 0xff;
- c->Request.CDB[8]= (start_blk >> 8) & 0xff;
- c->Request.CDB[9]= start_blk & 0xff;
- c->Request.CDB[10]= (blk_rq_sectors(creq) >> 24) & 0xff;
- c->Request.CDB[11]= (blk_rq_sectors(creq) >> 16) & 0xff;
- c->Request.CDB[12]= (blk_rq_sectors(creq) >> 8) & 0xff;
- c->Request.CDB[13]= blk_rq_sectors(creq) & 0xff;
- c->Request.CDB[14] = c->Request.CDB[15] = 0;
- }
- break;
- case REQ_OP_SCSI_IN:
- case REQ_OP_SCSI_OUT:
- c->Request.CDBLen = scsi_req(creq)->cmd_len;
- memcpy(c->Request.CDB, scsi_req(creq)->cmd, BLK_MAX_CDB);
- scsi_req(creq)->sense = c->err_info->SenseInfo;
- break;
- default:
- dev_warn(&h->pdev->dev, "bad request type %d\n",
- creq->cmd_flags);
- BUG();
- }
-
- spin_lock_irq(q->queue_lock);
-
- addQ(&h->reqQ, c);
- h->Qdepth++;
- if (h->Qdepth > h->maxQsinceinit)
- h->maxQsinceinit = h->Qdepth;
-
- goto queue;
-full:
- blk_stop_queue(q);
-startio:
- /* We will already have the driver lock here so not need
- * to lock it.
- */
- start_io(h);
-}
-
-static inline unsigned long get_next_completion(ctlr_info_t *h)
-{
- return h->access.command_completed(h);
-}
-
-static inline int interrupt_pending(ctlr_info_t *h)
-{
- return h->access.intr_pending(h);
-}
-
-static inline long interrupt_not_for_us(ctlr_info_t *h)
-{
- return ((h->access.intr_pending(h) == 0) ||
- (h->interrupts_enabled == 0));
-}
-
-static inline int bad_tag(ctlr_info_t *h, u32 tag_index,
- u32 raw_tag)
-{
- if (unlikely(tag_index >= h->nr_cmds)) {
- dev_warn(&h->pdev->dev, "bad tag 0x%08x ignored.\n", raw_tag);
- return 1;
- }
- return 0;
-}
-
-static inline void finish_cmd(ctlr_info_t *h, CommandList_struct *c,
- u32 raw_tag)
-{
- removeQ(c);
- if (likely(c->cmd_type == CMD_RWREQ))
- complete_command(h, c, 0);
- else if (c->cmd_type == CMD_IOCTL_PEND)
- complete(c->waiting);
-#ifdef CONFIG_CISS_SCSI_TAPE
- else if (c->cmd_type == CMD_SCSI)
- complete_scsi_command(c, 0, raw_tag);
-#endif
-}
-
-static inline u32 next_command(ctlr_info_t *h)
-{
- u32 a;
-
- if (unlikely(!(h->transMethod & CFGTBL_Trans_Performant)))
- return h->access.command_completed(h);
-
- if ((*(h->reply_pool_head) & 1) == (h->reply_pool_wraparound)) {
- a = *(h->reply_pool_head); /* Next cmd in ring buffer */
- (h->reply_pool_head)++;
- h->commands_outstanding--;
- } else {
- a = FIFO_EMPTY;
- }
- /* Check for wraparound */
- if (h->reply_pool_head == (h->reply_pool + h->max_commands)) {
- h->reply_pool_head = h->reply_pool;
- h->reply_pool_wraparound ^= 1;
- }
- return a;
-}
-
-/* process completion of an indexed ("direct lookup") command */
-static inline u32 process_indexed_cmd(ctlr_info_t *h, u32 raw_tag)
-{
- u32 tag_index;
- CommandList_struct *c;
-
- tag_index = cciss_tag_to_index(raw_tag);
- if (bad_tag(h, tag_index, raw_tag))
- return next_command(h);
- c = h->cmd_pool + tag_index;
- finish_cmd(h, c, raw_tag);
- return next_command(h);
-}
-
-/* process completion of a non-indexed command */
-static inline u32 process_nonindexed_cmd(ctlr_info_t *h, u32 raw_tag)
-{
- CommandList_struct *c = NULL;
- __u32 busaddr_masked, tag_masked;
-
- tag_masked = cciss_tag_discard_error_bits(h, raw_tag);
- list_for_each_entry(c, &h->cmpQ, list) {
- busaddr_masked = cciss_tag_discard_error_bits(h, c->busaddr);
- if (busaddr_masked == tag_masked) {
- finish_cmd(h, c, raw_tag);
- return next_command(h);
- }
- }
- bad_tag(h, h->nr_cmds + 1, raw_tag);
- return next_command(h);
-}
-
-/* Some controllers, like p400, will give us one interrupt
- * after a soft reset, even if we turned interrupts off.
- * Only need to check for this in the cciss_xxx_discard_completions
- * functions.
- */
-static int ignore_bogus_interrupt(ctlr_info_t *h)
-{
- if (likely(!reset_devices))
- return 0;
-
- if (likely(h->interrupts_enabled))
- return 0;
-
- dev_info(&h->pdev->dev, "Received interrupt while interrupts disabled "
- "(known firmware bug.) Ignoring.\n");
-
- return 1;
-}
-
-static irqreturn_t cciss_intx_discard_completions(int irq, void *dev_id)
-{
- ctlr_info_t *h = dev_id;
- unsigned long flags;
- u32 raw_tag;
-
- if (ignore_bogus_interrupt(h))
- return IRQ_NONE;
-
- if (interrupt_not_for_us(h))
- return IRQ_NONE;
- spin_lock_irqsave(&h->lock, flags);
- while (interrupt_pending(h)) {
- raw_tag = get_next_completion(h);
- while (raw_tag != FIFO_EMPTY)
- raw_tag = next_command(h);
- }
- spin_unlock_irqrestore(&h->lock, flags);
- return IRQ_HANDLED;
-}
-
-static irqreturn_t cciss_msix_discard_completions(int irq, void *dev_id)
-{
- ctlr_info_t *h = dev_id;
- unsigned long flags;
- u32 raw_tag;
-
- if (ignore_bogus_interrupt(h))
- return IRQ_NONE;
-
- spin_lock_irqsave(&h->lock, flags);
- raw_tag = get_next_completion(h);
- while (raw_tag != FIFO_EMPTY)
- raw_tag = next_command(h);
- spin_unlock_irqrestore(&h->lock, flags);
- return IRQ_HANDLED;
-}
-
-static irqreturn_t do_cciss_intx(int irq, void *dev_id)
-{
- ctlr_info_t *h = dev_id;
- unsigned long flags;
- u32 raw_tag;
-
- if (interrupt_not_for_us(h))
- return IRQ_NONE;
- spin_lock_irqsave(&h->lock, flags);
- while (interrupt_pending(h)) {
- raw_tag = get_next_completion(h);
- while (raw_tag != FIFO_EMPTY) {
- if (cciss_tag_contains_index(raw_tag))
- raw_tag = process_indexed_cmd(h, raw_tag);
- else
- raw_tag = process_nonindexed_cmd(h, raw_tag);
- }
- }
- spin_unlock_irqrestore(&h->lock, flags);
- return IRQ_HANDLED;
-}
-
-/* Add a second interrupt handler for MSI/MSI-X mode. In this mode we never
- * check the interrupt pending register because it is not set.
- */
-static irqreturn_t do_cciss_msix_intr(int irq, void *dev_id)
-{
- ctlr_info_t *h = dev_id;
- unsigned long flags;
- u32 raw_tag;
-
- spin_lock_irqsave(&h->lock, flags);
- raw_tag = get_next_completion(h);
- while (raw_tag != FIFO_EMPTY) {
- if (cciss_tag_contains_index(raw_tag))
- raw_tag = process_indexed_cmd(h, raw_tag);
- else
- raw_tag = process_nonindexed_cmd(h, raw_tag);
- }
- spin_unlock_irqrestore(&h->lock, flags);
- return IRQ_HANDLED;
-}
-
-/**
- * add_to_scan_list() - add controller to rescan queue
- * @h: Pointer to the controller.
- *
- * Adds the controller to the rescan queue if not already on the queue.
- *
- * returns 1 if added to the queue, 0 if skipped (could be on the
- * queue already, or the controller could be initializing or shutting
- * down).
- **/
-static int add_to_scan_list(struct ctlr_info *h)
-{
- struct ctlr_info *test_h;
- int found = 0;
- int ret = 0;
-
- if (h->busy_initializing)
- return 0;
-
- if (!mutex_trylock(&h->busy_shutting_down))
- return 0;
-
- mutex_lock(&scan_mutex);
- list_for_each_entry(test_h, &scan_q, scan_list) {
- if (test_h == h) {
- found = 1;
- break;
- }
- }
- if (!found && !h->busy_scanning) {
- reinit_completion(&h->scan_wait);
- list_add_tail(&h->scan_list, &scan_q);
- ret = 1;
- }
- mutex_unlock(&scan_mutex);
- mutex_unlock(&h->busy_shutting_down);
-
- return ret;
-}
-
-/**
- * remove_from_scan_list() - remove controller from rescan queue
- * @h: Pointer to the controller.
- *
- * Removes the controller from the rescan queue if present. Blocks if
- * the controller is currently conducting a rescan. The controller
- * can be in one of three states:
- * 1. Doesn't need a scan
- * 2. On the scan list, but not scanning yet (we remove it)
- * 3. Busy scanning (and not on the list). In this case we want to wait for
- * the scan to complete to make sure the scanning thread for this
- * controller is completely idle.
- **/
-static void remove_from_scan_list(struct ctlr_info *h)
-{
- struct ctlr_info *test_h, *tmp_h;
-
- mutex_lock(&scan_mutex);
- list_for_each_entry_safe(test_h, tmp_h, &scan_q, scan_list) {
- if (test_h == h) { /* state 2. */
- list_del(&h->scan_list);
- complete_all(&h->scan_wait);
- mutex_unlock(&scan_mutex);
- return;
- }
- }
- if (h->busy_scanning) { /* state 3. */
- mutex_unlock(&scan_mutex);
- wait_for_completion(&h->scan_wait);
- } else { /* state 1, nothing to do. */
- mutex_unlock(&scan_mutex);
- }
-}
-
-/**
- * scan_thread() - kernel thread used to rescan controllers
- * @data: Ignored.
- *
- * A kernel thread used scan for drive topology changes on
- * controllers. The thread processes only one controller at a time
- * using a queue. Controllers are added to the queue using
- * add_to_scan_list() and removed from the queue either after done
- * processing or using remove_from_scan_list().
- *
- * returns 0.
- **/
-static int scan_thread(void *data)
-{
- struct ctlr_info *h;
-
- while (1) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule();
- if (kthread_should_stop())
- break;
-
- while (1) {
- mutex_lock(&scan_mutex);
- if (list_empty(&scan_q)) {
- mutex_unlock(&scan_mutex);
- break;
- }
-
- h = list_entry(scan_q.next,
- struct ctlr_info,
- scan_list);
- list_del(&h->scan_list);
- h->busy_scanning = 1;
- mutex_unlock(&scan_mutex);
-
- rebuild_lun_table(h, 0, 0);
- complete_all(&h->scan_wait);
- mutex_lock(&scan_mutex);
- h->busy_scanning = 0;
- mutex_unlock(&scan_mutex);
- }
- }
-
- return 0;
-}
-
-static int check_for_unit_attention(ctlr_info_t *h, CommandList_struct *c)
-{
- if (c->err_info->SenseInfo[2] != UNIT_ATTENTION)
- return 0;
-
- switch (c->err_info->SenseInfo[12]) {
- case STATE_CHANGED:
- dev_warn(&h->pdev->dev, "a state change "
- "detected, command retried\n");
- return 1;
- break;
- case LUN_FAILED:
- dev_warn(&h->pdev->dev, "LUN failure "
- "detected, action required\n");
- return 1;
- break;
- case REPORT_LUNS_CHANGED:
- dev_warn(&h->pdev->dev, "report LUN data changed\n");
- /*
- * Here, we could call add_to_scan_list and wake up the scan thread,
- * except that it's quite likely that we will get more than one
- * REPORT_LUNS_CHANGED condition in quick succession, which means
- * that those which occur after the first one will likely happen
- * *during* the scan_thread's rescan. And the rescan code is not
- * robust enough to restart in the middle, undoing what it has already
- * done, and it's not clear that it's even possible to do this, since
- * part of what it does is notify the block layer, which starts
- * doing it's own i/o to read partition tables and so on, and the
- * driver doesn't have visibility to know what might need undoing.
- * In any event, if possible, it is horribly complicated to get right
- * so we just don't do it for now.
- *
- * Note: this REPORT_LUNS_CHANGED condition only occurs on the MSA2012.
- */
- return 1;
- break;
- case POWER_OR_RESET:
- dev_warn(&h->pdev->dev,
- "a power on or device reset detected\n");
- return 1;
- break;
- case UNIT_ATTENTION_CLEARED:
- dev_warn(&h->pdev->dev,
- "unit attention cleared by another initiator\n");
- return 1;
- break;
- default:
- dev_warn(&h->pdev->dev, "unknown unit attention detected\n");
- return 1;
- }
-}
-
-/*
- * We cannot read the structure directly, for portability we must use
- * the io functions.
- * This is for debug only.
- */
-static void print_cfg_table(ctlr_info_t *h)
-{
- int i;
- char temp_name[17];
- CfgTable_struct *tb = h->cfgtable;
-
- dev_dbg(&h->pdev->dev, "Controller Configuration information\n");
- dev_dbg(&h->pdev->dev, "------------------------------------\n");
- for (i = 0; i < 4; i++)
- temp_name[i] = readb(&(tb->Signature[i]));
- temp_name[4] = '\0';
- dev_dbg(&h->pdev->dev, " Signature = %s\n", temp_name);
- dev_dbg(&h->pdev->dev, " Spec Number = %d\n",
- readl(&(tb->SpecValence)));
- dev_dbg(&h->pdev->dev, " Transport methods supported = 0x%x\n",
- readl(&(tb->TransportSupport)));
- dev_dbg(&h->pdev->dev, " Transport methods active = 0x%x\n",
- readl(&(tb->TransportActive)));
- dev_dbg(&h->pdev->dev, " Requested transport Method = 0x%x\n",
- readl(&(tb->HostWrite.TransportRequest)));
- dev_dbg(&h->pdev->dev, " Coalesce Interrupt Delay = 0x%x\n",
- readl(&(tb->HostWrite.CoalIntDelay)));
- dev_dbg(&h->pdev->dev, " Coalesce Interrupt Count = 0x%x\n",
- readl(&(tb->HostWrite.CoalIntCount)));
- dev_dbg(&h->pdev->dev, " Max outstanding commands = 0x%x\n",
- readl(&(tb->CmdsOutMax)));
- dev_dbg(&h->pdev->dev, " Bus Types = 0x%x\n",
- readl(&(tb->BusTypes)));
- for (i = 0; i < 16; i++)
- temp_name[i] = readb(&(tb->ServerName[i]));
- temp_name[16] = '\0';
- dev_dbg(&h->pdev->dev, " Server Name = %s\n", temp_name);
- dev_dbg(&h->pdev->dev, " Heartbeat Counter = 0x%x\n\n\n",
- readl(&(tb->HeartBeat)));
-}
-
-static int find_PCI_BAR_index(struct pci_dev *pdev, unsigned long pci_bar_addr)
-{
- int i, offset, mem_type, bar_type;
- if (pci_bar_addr == PCI_BASE_ADDRESS_0) /* looking for BAR zero? */
- return 0;
- offset = 0;
- for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
- bar_type = pci_resource_flags(pdev, i) & PCI_BASE_ADDRESS_SPACE;
- if (bar_type == PCI_BASE_ADDRESS_SPACE_IO)
- offset += 4;
- else {
- mem_type = pci_resource_flags(pdev, i) &
- PCI_BASE_ADDRESS_MEM_TYPE_MASK;
- switch (mem_type) {
- case PCI_BASE_ADDRESS_MEM_TYPE_32:
- case PCI_BASE_ADDRESS_MEM_TYPE_1M:
- offset += 4; /* 32 bit */
- break;
- case PCI_BASE_ADDRESS_MEM_TYPE_64:
- offset += 8;
- break;
- default: /* reserved in PCI 2.2 */
- dev_warn(&pdev->dev,
- "Base address is invalid\n");
- return -1;
- break;
- }
- }
- if (offset == pci_bar_addr - PCI_BASE_ADDRESS_0)
- return i + 1;
- }
- return -1;
-}
-
-/* Fill in bucket_map[], given nsgs (the max number of
- * scatter gather elements supported) and bucket[],
- * which is an array of 8 integers. The bucket[] array
- * contains 8 different DMA transfer sizes (in 16
- * byte increments) which the controller uses to fetch
- * commands. This function fills in bucket_map[], which
- * maps a given number of scatter gather elements to one of
- * the 8 DMA transfer sizes. The point of it is to allow the
- * controller to only do as much DMA as needed to fetch the
- * command, with the DMA transfer size encoded in the lower
- * bits of the command address.
- */
-static void calc_bucket_map(int bucket[], int num_buckets,
- int nsgs, int *bucket_map)
-{
- int i, j, b, size;
-
- /* even a command with 0 SGs requires 4 blocks */
-#define MINIMUM_TRANSFER_BLOCKS 4
-#define NUM_BUCKETS 8
- /* Note, bucket_map must have nsgs+1 entries. */
- for (i = 0; i <= nsgs; i++) {
- /* Compute size of a command with i SG entries */
- size = i + MINIMUM_TRANSFER_BLOCKS;
- b = num_buckets; /* Assume the biggest bucket */
- /* Find the bucket that is just big enough */
- for (j = 0; j < 8; j++) {
- if (bucket[j] >= size) {
- b = j;
- break;
- }
- }
- /* for a command with i SG entries, use bucket b. */
- bucket_map[i] = b;
- }
-}
-
-static void cciss_wait_for_mode_change_ack(ctlr_info_t *h)
-{
- int i;
-
- /* under certain very rare conditions, this can take awhile.
- * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right
- * as we enter this code.) */
- for (i = 0; i < MAX_CONFIG_WAIT; i++) {
- if (!(readl(h->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq))
- break;
- usleep_range(10000, 20000);
- }
-}
-
-static void cciss_enter_performant_mode(ctlr_info_t *h, u32 use_short_tags)
-{
- /* This is a bit complicated. There are 8 registers on
- * the controller which we write to to tell it 8 different
- * sizes of commands which there may be. It's a way of
- * reducing the DMA done to fetch each command. Encoded into
- * each command's tag are 3 bits which communicate to the controller
- * which of the eight sizes that command fits within. The size of
- * each command depends on how many scatter gather entries there are.
- * Each SG entry requires 16 bytes. The eight registers are programmed
- * with the number of 16-byte blocks a command of that size requires.
- * The smallest command possible requires 5 such 16 byte blocks.
- * the largest command possible requires MAXSGENTRIES + 4 16-byte
- * blocks. Note, this only extends to the SG entries contained
- * within the command block, and does not extend to chained blocks
- * of SG elements. bft[] contains the eight values we write to
- * the registers. They are not evenly distributed, but have more
- * sizes for small commands, and fewer sizes for larger commands.
- */
- __u32 trans_offset;
- int bft[8] = { 5, 6, 8, 10, 12, 20, 28, MAXSGENTRIES + 4};
- /*
- * 5 = 1 s/g entry or 4k
- * 6 = 2 s/g entry or 8k
- * 8 = 4 s/g entry or 16k
- * 10 = 6 s/g entry or 24k
- */
- unsigned long register_value;
- BUILD_BUG_ON(28 > MAXSGENTRIES + 4);
-
- h->reply_pool_wraparound = 1; /* spec: init to 1 */
-
- /* Controller spec: zero out this buffer. */
- memset(h->reply_pool, 0, h->max_commands * sizeof(__u64));
- h->reply_pool_head = h->reply_pool;
-
- trans_offset = readl(&(h->cfgtable->TransMethodOffset));
- calc_bucket_map(bft, ARRAY_SIZE(bft), h->maxsgentries,
- h->blockFetchTable);
- writel(bft[0], &h->transtable->BlockFetch0);
- writel(bft[1], &h->transtable->BlockFetch1);
- writel(bft[2], &h->transtable->BlockFetch2);
- writel(bft[3], &h->transtable->BlockFetch3);
- writel(bft[4], &h->transtable->BlockFetch4);
- writel(bft[5], &h->transtable->BlockFetch5);
- writel(bft[6], &h->transtable->BlockFetch6);
- writel(bft[7], &h->transtable->BlockFetch7);
-
- /* size of controller ring buffer */
- writel(h->max_commands, &h->transtable->RepQSize);
- writel(1, &h->transtable->RepQCount);
- writel(0, &h->transtable->RepQCtrAddrLow32);
- writel(0, &h->transtable->RepQCtrAddrHigh32);
- writel(h->reply_pool_dhandle, &h->transtable->RepQAddr0Low32);
- writel(0, &h->transtable->RepQAddr0High32);
- writel(CFGTBL_Trans_Performant | use_short_tags,
- &(h->cfgtable->HostWrite.TransportRequest));
-
- writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
- cciss_wait_for_mode_change_ack(h);
- register_value = readl(&(h->cfgtable->TransportActive));
- if (!(register_value & CFGTBL_Trans_Performant))
- dev_warn(&h->pdev->dev, "cciss: unable to get board into"
- " performant mode\n");
-}
-
-static void cciss_put_controller_into_performant_mode(ctlr_info_t *h)
-{
- __u32 trans_support;
-
- if (cciss_simple_mode)
- return;
-
- dev_dbg(&h->pdev->dev, "Trying to put board into Performant mode\n");
- /* Attempt to put controller into performant mode if supported */
- /* Does board support performant mode? */
- trans_support = readl(&(h->cfgtable->TransportSupport));
- if (!(trans_support & PERFORMANT_MODE))
- return;
-
- dev_dbg(&h->pdev->dev, "Placing controller into performant mode\n");
- /* Performant mode demands commands on a 32 byte boundary
- * pci_alloc_consistent aligns on page boundarys already.
- * Just need to check if divisible by 32
- */
- if ((sizeof(CommandList_struct) % 32) != 0) {
- dev_warn(&h->pdev->dev, "%s %d %s\n",
- "cciss info: command size[",
- (int)sizeof(CommandList_struct),
- "] not divisible by 32, no performant mode..\n");
- return;
- }
-
- /* Performant mode ring buffer and supporting data structures */
- h->reply_pool = (__u64 *)pci_alloc_consistent(
- h->pdev, h->max_commands * sizeof(__u64),
- &(h->reply_pool_dhandle));
-
- /* Need a block fetch table for performant mode */
- h->blockFetchTable = kmalloc(((h->maxsgentries+1) *
- sizeof(__u32)), GFP_KERNEL);
-
- if ((h->reply_pool == NULL) || (h->blockFetchTable == NULL))
- goto clean_up;
-
- cciss_enter_performant_mode(h,
- trans_support & CFGTBL_Trans_use_short_tags);
-
- /* Change the access methods to the performant access methods */
- h->access = SA5_performant_access;
- h->transMethod = CFGTBL_Trans_Performant;
-
- return;
-clean_up:
- kfree(h->blockFetchTable);
- if (h->reply_pool)
- pci_free_consistent(h->pdev,
- h->max_commands * sizeof(__u64),
- h->reply_pool,
- h->reply_pool_dhandle);
- return;
-
-} /* cciss_put_controller_into_performant_mode */
-
-/* If MSI/MSI-X is supported by the kernel we will try to enable it on
- * controllers that are capable. If not, we use IO-APIC mode.
- */
-
-static void cciss_interrupt_mode(ctlr_info_t *h)
-{
- int ret;
-
- /* Some boards advertise MSI but don't really support it */
- if ((h->board_id == 0x40700E11) || (h->board_id == 0x40800E11) ||
- (h->board_id == 0x40820E11) || (h->board_id == 0x40830E11))
- goto default_int_mode;
-
- ret = pci_alloc_irq_vectors(h->pdev, 4, 4, PCI_IRQ_MSIX);
- if (ret >= 0) {
- h->intr[0] = pci_irq_vector(h->pdev, 0);
- h->intr[1] = pci_irq_vector(h->pdev, 1);
- h->intr[2] = pci_irq_vector(h->pdev, 2);
- h->intr[3] = pci_irq_vector(h->pdev, 3);
- return;
- }
-
- ret = pci_alloc_irq_vectors(h->pdev, 1, 1, PCI_IRQ_MSI);
-
-default_int_mode:
- /* if we get here we're going to use the default interrupt mode */
- h->intr[h->intr_mode] = pci_irq_vector(h->pdev, 0);
- return;
-}
-
-static int cciss_lookup_board_id(struct pci_dev *pdev, u32 *board_id)
-{
- int i;
- u32 subsystem_vendor_id, subsystem_device_id;
-
- subsystem_vendor_id = pdev->subsystem_vendor;
- subsystem_device_id = pdev->subsystem_device;
- *board_id = ((subsystem_device_id << 16) & 0xffff0000) |
- subsystem_vendor_id;
-
- for (i = 0; i < ARRAY_SIZE(products); i++) {
- /* Stand aside for hpsa driver on request */
- if (cciss_allow_hpsa)
- return -ENODEV;
- if (*board_id == products[i].board_id)
- return i;
- }
- dev_warn(&pdev->dev, "unrecognized board ID: 0x%08x, ignoring.\n",
- *board_id);
- return -ENODEV;
-}
-
-static inline bool cciss_board_disabled(ctlr_info_t *h)
-{
- u16 command;
-
- (void) pci_read_config_word(h->pdev, PCI_COMMAND, &command);
- return ((command & PCI_COMMAND_MEMORY) == 0);
-}
-
-static int cciss_pci_find_memory_BAR(struct pci_dev *pdev,
- unsigned long *memory_bar)
-{
- int i;
-
- for (i = 0; i < DEVICE_COUNT_RESOURCE; i++)
- if (pci_resource_flags(pdev, i) & IORESOURCE_MEM) {
- /* addressing mode bits already removed */
- *memory_bar = pci_resource_start(pdev, i);
- dev_dbg(&pdev->dev, "memory BAR = %lx\n",
- *memory_bar);
- return 0;
- }
- dev_warn(&pdev->dev, "no memory BAR found\n");
- return -ENODEV;
-}
-
-static int cciss_wait_for_board_state(struct pci_dev *pdev,
- void __iomem *vaddr, int wait_for_ready)
-#define BOARD_READY 1
-#define BOARD_NOT_READY 0
-{
- int i, iterations;
- u32 scratchpad;
-
- if (wait_for_ready)
- iterations = CCISS_BOARD_READY_ITERATIONS;
- else
- iterations = CCISS_BOARD_NOT_READY_ITERATIONS;
-
- for (i = 0; i < iterations; i++) {
- scratchpad = readl(vaddr + SA5_SCRATCHPAD_OFFSET);
- if (wait_for_ready) {
- if (scratchpad == CCISS_FIRMWARE_READY)
- return 0;
- } else {
- if (scratchpad != CCISS_FIRMWARE_READY)
- return 0;
- }
- msleep(CCISS_BOARD_READY_POLL_INTERVAL_MSECS);
- }
- dev_warn(&pdev->dev, "board not ready, timed out.\n");
- return -ENODEV;
-}
-
-static int cciss_find_cfg_addrs(struct pci_dev *pdev, void __iomem *vaddr,
- u32 *cfg_base_addr, u64 *cfg_base_addr_index,
- u64 *cfg_offset)
-{
- *cfg_base_addr = readl(vaddr + SA5_CTCFG_OFFSET);
- *cfg_offset = readl(vaddr + SA5_CTMEM_OFFSET);
- *cfg_base_addr &= (u32) 0x0000ffff;
- *cfg_base_addr_index = find_PCI_BAR_index(pdev, *cfg_base_addr);
- if (*cfg_base_addr_index == -1) {
- dev_warn(&pdev->dev, "cannot find cfg_base_addr_index, "
- "*cfg_base_addr = 0x%08x\n", *cfg_base_addr);
- return -ENODEV;
- }
- return 0;
-}
-
-static int cciss_find_cfgtables(ctlr_info_t *h)
-{
- u64 cfg_offset;
- u32 cfg_base_addr;
- u64 cfg_base_addr_index;
- u32 trans_offset;
- int rc;
-
- rc = cciss_find_cfg_addrs(h->pdev, h->vaddr, &cfg_base_addr,
- &cfg_base_addr_index, &cfg_offset);
- if (rc)
- return rc;
- h->cfgtable = remap_pci_mem(pci_resource_start(h->pdev,
- cfg_base_addr_index) + cfg_offset, sizeof(*h->cfgtable));
- if (!h->cfgtable)
- return -ENOMEM;
- rc = write_driver_ver_to_cfgtable(h->cfgtable);
- if (rc)
- return rc;
- /* Find performant mode table. */
- trans_offset = readl(&h->cfgtable->TransMethodOffset);
- h->transtable = remap_pci_mem(pci_resource_start(h->pdev,
- cfg_base_addr_index)+cfg_offset+trans_offset,
- sizeof(*h->transtable));
- if (!h->transtable)
- return -ENOMEM;
- return 0;
-}
-
-static void cciss_get_max_perf_mode_cmds(struct ctlr_info *h)
-{
- h->max_commands = readl(&(h->cfgtable->MaxPerformantModeCommands));
-
- /* Limit commands in memory limited kdump scenario. */
- if (reset_devices && h->max_commands > 32)
- h->max_commands = 32;
-
- if (h->max_commands < 16) {
- dev_warn(&h->pdev->dev, "Controller reports "
- "max supported commands of %d, an obvious lie. "
- "Using 16. Ensure that firmware is up to date.\n",
- h->max_commands);
- h->max_commands = 16;
- }
-}
-
-/* Interrogate the hardware for some limits:
- * max commands, max SG elements without chaining, and with chaining,
- * SG chain block size, etc.
- */
-static void cciss_find_board_params(ctlr_info_t *h)
-{
- cciss_get_max_perf_mode_cmds(h);
- h->nr_cmds = h->max_commands - 4 - cciss_tape_cmds;
- h->maxsgentries = readl(&(h->cfgtable->MaxSGElements));
- /*
- * The P600 may exhibit poor performnace under some workloads
- * if we use the value in the configuration table. Limit this
- * controller to MAXSGENTRIES (32) instead.
- */
- if (h->board_id == 0x3225103C)
- h->maxsgentries = MAXSGENTRIES;
- /*
- * Limit in-command s/g elements to 32 save dma'able memory.
- * Howvever spec says if 0, use 31
- */
- h->max_cmd_sgentries = 31;
- if (h->maxsgentries > 512) {
- h->max_cmd_sgentries = 32;
- h->chainsize = h->maxsgentries - h->max_cmd_sgentries + 1;
- h->maxsgentries--; /* save one for chain pointer */
- } else {
- h->maxsgentries = 31; /* default to traditional values */
- h->chainsize = 0;
- }
-}
-
-static inline bool CISS_signature_present(ctlr_info_t *h)
-{
- if (!check_signature(h->cfgtable->Signature, "CISS", 4)) {
- dev_warn(&h->pdev->dev, "not a valid CISS config table\n");
- return false;
- }
- return true;
-}
-
-/* Need to enable prefetch in the SCSI core for 6400 in x86 */
-static inline void cciss_enable_scsi_prefetch(ctlr_info_t *h)
-{
-#ifdef CONFIG_X86
- u32 prefetch;
-
- prefetch = readl(&(h->cfgtable->SCSI_Prefetch));
- prefetch |= 0x100;
- writel(prefetch, &(h->cfgtable->SCSI_Prefetch));
-#endif
-}
-
-/* Disable DMA prefetch for the P600. Otherwise an ASIC bug may result
- * in a prefetch beyond physical memory.
- */
-static inline void cciss_p600_dma_prefetch_quirk(ctlr_info_t *h)
-{
- u32 dma_prefetch;
- __u32 dma_refetch;
-
- if (h->board_id != 0x3225103C)
- return;
- dma_prefetch = readl(h->vaddr + I2O_DMA1_CFG);
- dma_prefetch |= 0x8000;
- writel(dma_prefetch, h->vaddr + I2O_DMA1_CFG);
- pci_read_config_dword(h->pdev, PCI_COMMAND_PARITY, &dma_refetch);
- dma_refetch |= 0x1;
- pci_write_config_dword(h->pdev, PCI_COMMAND_PARITY, dma_refetch);
-}
-
-static int cciss_pci_init(ctlr_info_t *h)
-{
- int prod_index, err;
-
- prod_index = cciss_lookup_board_id(h->pdev, &h->board_id);
- if (prod_index < 0)
- return -ENODEV;
- h->product_name = products[prod_index].product_name;
- h->access = *(products[prod_index].access);
-
- if (cciss_board_disabled(h)) {
- dev_warn(&h->pdev->dev, "controller appears to be disabled\n");
- return -ENODEV;
- }
-
- pci_disable_link_state(h->pdev, PCIE_LINK_STATE_L0S |
- PCIE_LINK_STATE_L1 | PCIE_LINK_STATE_CLKPM);
-
- err = pci_enable_device(h->pdev);
- if (err) {
- dev_warn(&h->pdev->dev, "Unable to Enable PCI device\n");
- return err;
- }
-
- err = pci_request_regions(h->pdev, "cciss");
- if (err) {
- dev_warn(&h->pdev->dev,
- "Cannot obtain PCI resources, aborting\n");
- return err;
- }
-
- dev_dbg(&h->pdev->dev, "irq = %x\n", h->pdev->irq);
- dev_dbg(&h->pdev->dev, "board_id = %x\n", h->board_id);
-
-/* If the kernel supports MSI/MSI-X we will try to enable that functionality,
- * else we use the IO-APIC interrupt assigned to us by system ROM.
- */
- cciss_interrupt_mode(h);
- err = cciss_pci_find_memory_BAR(h->pdev, &h->paddr);
- if (err)
- goto err_out_free_res;
- h->vaddr = remap_pci_mem(h->paddr, 0x250);
- if (!h->vaddr) {
- err = -ENOMEM;
- goto err_out_free_res;
- }
- err = cciss_wait_for_board_state(h->pdev, h->vaddr, BOARD_READY);
- if (err)
- goto err_out_free_res;
- err = cciss_find_cfgtables(h);
- if (err)
- goto err_out_free_res;
- print_cfg_table(h);
- cciss_find_board_params(h);
-
- if (!CISS_signature_present(h)) {
- err = -ENODEV;
- goto err_out_free_res;
- }
- cciss_enable_scsi_prefetch(h);
- cciss_p600_dma_prefetch_quirk(h);
- err = cciss_enter_simple_mode(h);
- if (err)
- goto err_out_free_res;
- cciss_put_controller_into_performant_mode(h);
- return 0;
-
-err_out_free_res:
- /*
- * Deliberately omit pci_disable_device(): it does something nasty to
- * Smart Array controllers that pci_enable_device does not undo
- */
- if (h->transtable)
- iounmap(h->transtable);
- if (h->cfgtable)
- iounmap(h->cfgtable);
- if (h->vaddr)
- iounmap(h->vaddr);
- pci_release_regions(h->pdev);
- return err;
-}
-
-/* Function to find the first free pointer into our hba[] array
- * Returns -1 if no free entries are left.
- */
-static int alloc_cciss_hba(struct pci_dev *pdev)
-{
- int i;
-
- for (i = 0; i < MAX_CTLR; i++) {
- if (!hba[i]) {
- ctlr_info_t *h;
-
- h = kzalloc(sizeof(ctlr_info_t), GFP_KERNEL);
- if (!h)
- goto Enomem;
- hba[i] = h;
- return i;
- }
- }
- dev_warn(&pdev->dev, "This driver supports a maximum"
- " of %d controllers.\n", MAX_CTLR);
- return -1;
-Enomem:
- dev_warn(&pdev->dev, "out of memory.\n");
- return -1;
-}
-
-static void free_hba(ctlr_info_t *h)
-{
- int i;
-
- hba[h->ctlr] = NULL;
- for (i = 0; i < h->highest_lun + 1; i++)
- if (h->gendisk[i] != NULL)
- put_disk(h->gendisk[i]);
- kfree(h);
-}
-
-/* Send a message CDB to the firmware. */
-static int cciss_message(struct pci_dev *pdev, unsigned char opcode,
- unsigned char type)
-{
- typedef struct {
- CommandListHeader_struct CommandHeader;
- RequestBlock_struct Request;
- ErrDescriptor_struct ErrorDescriptor;
- } Command;
- static const size_t cmd_sz = sizeof(Command) + sizeof(ErrorInfo_struct);
- Command *cmd;
- dma_addr_t paddr64;
- uint32_t paddr32, tag;
- void __iomem *vaddr;
- int i, err;
-
- vaddr = ioremap_nocache(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
- if (vaddr == NULL)
- return -ENOMEM;
-
- /* The Inbound Post Queue only accepts 32-bit physical addresses for the
- CCISS commands, so they must be allocated from the lower 4GiB of
- memory. */
- err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
- if (err) {
- iounmap(vaddr);
- return -ENOMEM;
- }
-
- cmd = pci_alloc_consistent(pdev, cmd_sz, &paddr64);
- if (cmd == NULL) {
- iounmap(vaddr);
- return -ENOMEM;
- }
-
- /* This must fit, because of the 32-bit consistent DMA mask. Also,
- although there's no guarantee, we assume that the address is at
- least 4-byte aligned (most likely, it's page-aligned). */
- paddr32 = paddr64;
-
- cmd->CommandHeader.ReplyQueue = 0;
- cmd->CommandHeader.SGList = 0;
- cmd->CommandHeader.SGTotal = 0;
- cmd->CommandHeader.Tag.lower = paddr32;
- cmd->CommandHeader.Tag.upper = 0;
- memset(&cmd->CommandHeader.LUN.LunAddrBytes, 0, 8);
-
- cmd->Request.CDBLen = 16;
- cmd->Request.Type.Type = TYPE_MSG;
- cmd->Request.Type.Attribute = ATTR_HEADOFQUEUE;
- cmd->Request.Type.Direction = XFER_NONE;
- cmd->Request.Timeout = 0; /* Don't time out */
- cmd->Request.CDB[0] = opcode;
- cmd->Request.CDB[1] = type;
- memset(&cmd->Request.CDB[2], 0, 14); /* the rest of the CDB is reserved */
-
- cmd->ErrorDescriptor.Addr.lower = paddr32 + sizeof(Command);
- cmd->ErrorDescriptor.Addr.upper = 0;
- cmd->ErrorDescriptor.Len = sizeof(ErrorInfo_struct);
-
- writel(paddr32, vaddr + SA5_REQUEST_PORT_OFFSET);
-
- for (i = 0; i < 10; i++) {
- tag = readl(vaddr + SA5_REPLY_PORT_OFFSET);
- if ((tag & ~3) == paddr32)
- break;
- msleep(CCISS_POST_RESET_NOOP_TIMEOUT_MSECS);
- }
-
- iounmap(vaddr);
-
- /* we leak the DMA buffer here ... no choice since the controller could
- still complete the command. */
- if (i == 10) {
- dev_err(&pdev->dev,
- "controller message %02x:%02x timed out\n",
- opcode, type);
- return -ETIMEDOUT;
- }
-
- pci_free_consistent(pdev, cmd_sz, cmd, paddr64);
-
- if (tag & 2) {
- dev_err(&pdev->dev, "controller message %02x:%02x failed\n",
- opcode, type);
- return -EIO;
- }
-
- dev_info(&pdev->dev, "controller message %02x:%02x succeeded\n",
- opcode, type);
- return 0;
-}
-
-#define cciss_noop(p) cciss_message(p, 3, 0)
-
-static int cciss_controller_hard_reset(struct pci_dev *pdev,
- void * __iomem vaddr, u32 use_doorbell)
-{
- u16 pmcsr;
- int pos;
-
- if (use_doorbell) {
- /* For everything after the P600, the PCI power state method
- * of resetting the controller doesn't work, so we have this
- * other way using the doorbell register.
- */
- dev_info(&pdev->dev, "using doorbell to reset controller\n");
- writel(use_doorbell, vaddr + SA5_DOORBELL);
- } else { /* Try to do it the PCI power state way */
-
- /* Quoting from the Open CISS Specification: "The Power
- * Management Control/Status Register (CSR) controls the power
- * state of the device. The normal operating state is D0,
- * CSR=00h. The software off state is D3, CSR=03h. To reset
- * the controller, place the interface device in D3 then to D0,
- * this causes a secondary PCI reset which will reset the
- * controller." */
-
- pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
- if (pos == 0) {
- dev_err(&pdev->dev,
- "cciss_controller_hard_reset: "
- "PCI PM not supported\n");
- return -ENODEV;
- }
- dev_info(&pdev->dev, "using PCI PM to reset controller\n");
- /* enter the D3hot power management state */
- pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr);
- pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
- pmcsr |= PCI_D3hot;
- pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
-
- msleep(500);
-
- /* enter the D0 power management state */
- pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
- pmcsr |= PCI_D0;
- pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
-
- /*
- * The P600 requires a small delay when changing states.
- * Otherwise we may think the board did not reset and we bail.
- * This for kdump only and is particular to the P600.
- */
- msleep(500);
- }
- return 0;
-}
-
-static void init_driver_version(char *driver_version, int len)
-{
- memset(driver_version, 0, len);
- strncpy(driver_version, "cciss " DRIVER_NAME, len - 1);
-}
-
-static int write_driver_ver_to_cfgtable(CfgTable_struct __iomem *cfgtable)
-{
- char *driver_version;
- int i, size = sizeof(cfgtable->driver_version);
-
- driver_version = kmalloc(size, GFP_KERNEL);
- if (!driver_version)
- return -ENOMEM;
-
- init_driver_version(driver_version, size);
- for (i = 0; i < size; i++)
- writeb(driver_version[i], &cfgtable->driver_version[i]);
- kfree(driver_version);
- return 0;
-}
-
-static void read_driver_ver_from_cfgtable(CfgTable_struct __iomem *cfgtable,
- unsigned char *driver_ver)
-{
- int i;
-
- for (i = 0; i < sizeof(cfgtable->driver_version); i++)
- driver_ver[i] = readb(&cfgtable->driver_version[i]);
-}
-
-static int controller_reset_failed(CfgTable_struct __iomem *cfgtable)
-{
-
- char *driver_ver, *old_driver_ver;
- int rc, size = sizeof(cfgtable->driver_version);
-
- old_driver_ver = kmalloc(2 * size, GFP_KERNEL);
- if (!old_driver_ver)
- return -ENOMEM;
- driver_ver = old_driver_ver + size;
-
- /* After a reset, the 32 bytes of "driver version" in the cfgtable
- * should have been changed, otherwise we know the reset failed.
- */
- init_driver_version(old_driver_ver, size);
- read_driver_ver_from_cfgtable(cfgtable, driver_ver);
- rc = !memcmp(driver_ver, old_driver_ver, size);
- kfree(old_driver_ver);
- return rc;
-}
-
-/* This does a hard reset of the controller using PCI power management
- * states or using the doorbell register. */
-static int cciss_kdump_hard_reset_controller(struct pci_dev *pdev)
-{
- u64 cfg_offset;
- u32 cfg_base_addr;
- u64 cfg_base_addr_index;
- void __iomem *vaddr;
- unsigned long paddr;
- u32 misc_fw_support;
- int rc;
- CfgTable_struct __iomem *cfgtable;
- u32 use_doorbell;
- u32 board_id;
- u16 command_register;
-
- /* For controllers as old a the p600, this is very nearly
- * the same thing as
- *
- * pci_save_state(pci_dev);
- * pci_set_power_state(pci_dev, PCI_D3hot);
- * pci_set_power_state(pci_dev, PCI_D0);
- * pci_restore_state(pci_dev);
- *
- * For controllers newer than the P600, the pci power state
- * method of resetting doesn't work so we have another way
- * using the doorbell register.
- */
-
- /* Exclude 640x boards. These are two pci devices in one slot
- * which share a battery backed cache module. One controls the
- * cache, the other accesses the cache through the one that controls
- * it. If we reset the one controlling the cache, the other will
- * likely not be happy. Just forbid resetting this conjoined mess.
- */
- cciss_lookup_board_id(pdev, &board_id);
- if (!ctlr_is_resettable(board_id)) {
- dev_warn(&pdev->dev, "Controller not resettable\n");
- return -ENODEV;
- }
-
- /* if controller is soft- but not hard resettable... */
- if (!ctlr_is_hard_resettable(board_id))
- return -ENOTSUPP; /* try soft reset later. */
-
- /* Save the PCI command register */
- pci_read_config_word(pdev, 4, &command_register);
- /* Turn the board off. This is so that later pci_restore_state()
- * won't turn the board on before the rest of config space is ready.
- */
- pci_disable_device(pdev);
- pci_save_state(pdev);
-
- /* find the first memory BAR, so we can find the cfg table */
- rc = cciss_pci_find_memory_BAR(pdev, &paddr);
- if (rc)
- return rc;
- vaddr = remap_pci_mem(paddr, 0x250);
- if (!vaddr)
- return -ENOMEM;
-
- /* find cfgtable in order to check if reset via doorbell is supported */
- rc = cciss_find_cfg_addrs(pdev, vaddr, &cfg_base_addr,
- &cfg_base_addr_index, &cfg_offset);
- if (rc)
- goto unmap_vaddr;
- cfgtable = remap_pci_mem(pci_resource_start(pdev,
- cfg_base_addr_index) + cfg_offset, sizeof(*cfgtable));
- if (!cfgtable) {
- rc = -ENOMEM;
- goto unmap_vaddr;
- }
- rc = write_driver_ver_to_cfgtable(cfgtable);
- if (rc)
- goto unmap_vaddr;
-
- /* If reset via doorbell register is supported, use that.
- * There are two such methods. Favor the newest method.
- */
- misc_fw_support = readl(&cfgtable->misc_fw_support);
- use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET2;
- if (use_doorbell) {
- use_doorbell = DOORBELL_CTLR_RESET2;
- } else {
- use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET;
- if (use_doorbell) {
- dev_warn(&pdev->dev, "Controller claims that "
- "'Bit 2 doorbell reset' is "
- "supported, but not 'bit 5 doorbell reset'. "
- "Firmware update is recommended.\n");
- rc = -ENOTSUPP; /* use the soft reset */
- goto unmap_cfgtable;
- }
- }
-
- rc = cciss_controller_hard_reset(pdev, vaddr, use_doorbell);
- if (rc)
- goto unmap_cfgtable;
- pci_restore_state(pdev);
- rc = pci_enable_device(pdev);
- if (rc) {
- dev_warn(&pdev->dev, "failed to enable device.\n");
- goto unmap_cfgtable;
- }
- pci_write_config_word(pdev, 4, command_register);
-
- /* Some devices (notably the HP Smart Array 5i Controller)
- need a little pause here */
- msleep(CCISS_POST_RESET_PAUSE_MSECS);
-
- /* Wait for board to become not ready, then ready. */
- dev_info(&pdev->dev, "Waiting for board to reset.\n");
- rc = cciss_wait_for_board_state(pdev, vaddr, BOARD_NOT_READY);
- if (rc) {
- dev_warn(&pdev->dev, "Failed waiting for board to hard reset."
- " Will try soft reset.\n");
- rc = -ENOTSUPP; /* Not expected, but try soft reset later */
- goto unmap_cfgtable;
- }
- rc = cciss_wait_for_board_state(pdev, vaddr, BOARD_READY);
- if (rc) {
- dev_warn(&pdev->dev,
- "failed waiting for board to become ready "
- "after hard reset\n");
- goto unmap_cfgtable;
- }
-
- rc = controller_reset_failed(vaddr);
- if (rc < 0)
- goto unmap_cfgtable;
- if (rc) {
- dev_warn(&pdev->dev, "Unable to successfully hard reset "
- "controller. Will try soft reset.\n");
- rc = -ENOTSUPP; /* Not expected, but try soft reset later */
- } else {
- dev_info(&pdev->dev, "Board ready after hard reset.\n");
- }
-
-unmap_cfgtable:
- iounmap(cfgtable);
-
-unmap_vaddr:
- iounmap(vaddr);
- return rc;
-}
-
-static int cciss_init_reset_devices(struct pci_dev *pdev)
-{
- int rc, i;
-
- if (!reset_devices)
- return 0;
-
- /* Reset the controller with a PCI power-cycle or via doorbell */
- rc = cciss_kdump_hard_reset_controller(pdev);
-
- /* -ENOTSUPP here means we cannot reset the controller
- * but it's already (and still) up and running in
- * "performant mode". Or, it might be 640x, which can't reset
- * due to concerns about shared bbwc between 6402/6404 pair.
- */
- if (rc == -ENOTSUPP)
- return rc; /* just try to do the kdump anyhow. */
- if (rc)
- return -ENODEV;
-
- /* Now try to get the controller to respond to a no-op */
- dev_warn(&pdev->dev, "Waiting for controller to respond to no-op\n");
- for (i = 0; i < CCISS_POST_RESET_NOOP_RETRIES; i++) {
- if (cciss_noop(pdev) == 0)
- break;
- else
- dev_warn(&pdev->dev, "no-op failed%s\n",
- (i < CCISS_POST_RESET_NOOP_RETRIES - 1 ?
- "; re-trying" : ""));
- msleep(CCISS_POST_RESET_NOOP_INTERVAL_MSECS);
- }
- return 0;
-}
-
-static int cciss_allocate_cmd_pool(ctlr_info_t *h)
-{
- h->cmd_pool_bits = kmalloc(BITS_TO_LONGS(h->nr_cmds) *
- sizeof(unsigned long), GFP_KERNEL);
- h->cmd_pool = pci_alloc_consistent(h->pdev,
- h->nr_cmds * sizeof(CommandList_struct),
- &(h->cmd_pool_dhandle));
- h->errinfo_pool = pci_alloc_consistent(h->pdev,
- h->nr_cmds * sizeof(ErrorInfo_struct),
- &(h->errinfo_pool_dhandle));
- if ((h->cmd_pool_bits == NULL)
- || (h->cmd_pool == NULL)
- || (h->errinfo_pool == NULL)) {
- dev_err(&h->pdev->dev, "out of memory");
- return -ENOMEM;
- }
- return 0;
-}
-
-static int cciss_allocate_scatterlists(ctlr_info_t *h)
-{
- int i;
-
- /* zero it, so that on free we need not know how many were alloc'ed */
- h->scatter_list = kzalloc(h->max_commands *
- sizeof(struct scatterlist *), GFP_KERNEL);
- if (!h->scatter_list)
- return -ENOMEM;
-
- for (i = 0; i < h->nr_cmds; i++) {
- h->scatter_list[i] = kmalloc(sizeof(struct scatterlist) *
- h->maxsgentries, GFP_KERNEL);
- if (h->scatter_list[i] == NULL) {
- dev_err(&h->pdev->dev, "could not allocate "
- "s/g lists\n");
- return -ENOMEM;
- }
- }
- return 0;
-}
-
-static void cciss_free_scatterlists(ctlr_info_t *h)
-{
- int i;
-
- if (h->scatter_list) {
- for (i = 0; i < h->nr_cmds; i++)
- kfree(h->scatter_list[i]);
- kfree(h->scatter_list);
- }
-}
-
-static void cciss_free_cmd_pool(ctlr_info_t *h)
-{
- kfree(h->cmd_pool_bits);
- if (h->cmd_pool)
- pci_free_consistent(h->pdev,
- h->nr_cmds * sizeof(CommandList_struct),
- h->cmd_pool, h->cmd_pool_dhandle);
- if (h->errinfo_pool)
- pci_free_consistent(h->pdev,
- h->nr_cmds * sizeof(ErrorInfo_struct),
- h->errinfo_pool, h->errinfo_pool_dhandle);
-}
-
-static int cciss_request_irq(ctlr_info_t *h,
- irqreturn_t (*msixhandler)(int, void *),
- irqreturn_t (*intxhandler)(int, void *))
-{
- if (h->pdev->msi_enabled || h->pdev->msix_enabled) {
- if (!request_irq(h->intr[h->intr_mode], msixhandler,
- 0, h->devname, h))
- return 0;
- dev_err(&h->pdev->dev, "Unable to get msi irq %d"
- " for %s\n", h->intr[h->intr_mode],
- h->devname);
- return -1;
- }
-
- if (!request_irq(h->intr[h->intr_mode], intxhandler,
- IRQF_SHARED, h->devname, h))
- return 0;
- dev_err(&h->pdev->dev, "Unable to get irq %d for %s\n",
- h->intr[h->intr_mode], h->devname);
- return -1;
-}
-
-static int cciss_kdump_soft_reset(ctlr_info_t *h)
-{
- if (cciss_send_reset(h, CTLR_LUNID, CCISS_RESET_TYPE_CONTROLLER)) {
- dev_warn(&h->pdev->dev, "Resetting array controller failed.\n");
- return -EIO;
- }
-
- dev_info(&h->pdev->dev, "Waiting for board to soft reset.\n");
- if (cciss_wait_for_board_state(h->pdev, h->vaddr, BOARD_NOT_READY)) {
- dev_warn(&h->pdev->dev, "Soft reset had no effect.\n");
- return -1;
- }
-
- dev_info(&h->pdev->dev, "Board reset, awaiting READY status.\n");
- if (cciss_wait_for_board_state(h->pdev, h->vaddr, BOARD_READY)) {
- dev_warn(&h->pdev->dev, "Board failed to become ready "
- "after soft reset.\n");
- return -1;
- }
-
- return 0;
-}
-
-static void cciss_undo_allocations_after_kdump_soft_reset(ctlr_info_t *h)
-{
- int ctlr = h->ctlr;
-
- free_irq(h->intr[h->intr_mode], h);
- pci_free_irq_vectors(h->pdev);
- cciss_free_sg_chain_blocks(h->cmd_sg_list, h->nr_cmds);
- cciss_free_scatterlists(h);
- cciss_free_cmd_pool(h);
- kfree(h->blockFetchTable);
- if (h->reply_pool)
- pci_free_consistent(h->pdev, h->max_commands * sizeof(__u64),
- h->reply_pool, h->reply_pool_dhandle);
- if (h->transtable)
- iounmap(h->transtable);
- if (h->cfgtable)
- iounmap(h->cfgtable);
- if (h->vaddr)
- iounmap(h->vaddr);
- unregister_blkdev(h->major, h->devname);
- cciss_destroy_hba_sysfs_entry(h);
- pci_release_regions(h->pdev);
- kfree(h);
- hba[ctlr] = NULL;
-}
-
-/*
- * This is it. Find all the controllers and register them. I really hate
- * stealing all these major device numbers.
- * returns the number of block devices registered.
- */
-static int cciss_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
-{
- int i;
- int j = 0;
- int rc;
- int try_soft_reset = 0;
- int dac, return_code;
- InquiryData_struct *inq_buff;
- ctlr_info_t *h;
- unsigned long flags;
-
- /*
- * By default the cciss driver is used for all older HP Smart Array
- * controllers. There are module paramaters that allow a user to
- * override this behavior and instead use the hpsa SCSI driver. If
- * this is the case cciss may be loaded first from the kdump initrd
- * image and cause a kernel panic. So if reset_devices is true and
- * cciss_allow_hpsa is set just bail.
- */
- if ((reset_devices) && (cciss_allow_hpsa == 1))
- return -ENODEV;
- rc = cciss_init_reset_devices(pdev);
- if (rc) {
- if (rc != -ENOTSUPP)
- return rc;
- /* If the reset fails in a particular way (it has no way to do
- * a proper hard reset, so returns -ENOTSUPP) we can try to do
- * a soft reset once we get the controller configured up to the
- * point that it can accept a command.
- */
- try_soft_reset = 1;
- rc = 0;
- }
-
-reinit_after_soft_reset:
-
- i = alloc_cciss_hba(pdev);
- if (i < 0)
- return -ENOMEM;
-
- h = hba[i];
- h->pdev = pdev;
- h->busy_initializing = 1;
- h->intr_mode = cciss_simple_mode ? SIMPLE_MODE_INT : PERF_MODE_INT;
- INIT_LIST_HEAD(&h->cmpQ);
- INIT_LIST_HEAD(&h->reqQ);
- mutex_init(&h->busy_shutting_down);
-
- if (cciss_pci_init(h) != 0)
- goto clean_no_release_regions;
-
- sprintf(h->devname, "cciss%d", i);
- h->ctlr = i;
-
- if (cciss_tape_cmds < 2)
- cciss_tape_cmds = 2;
- if (cciss_tape_cmds > 16)
- cciss_tape_cmds = 16;
-
- init_completion(&h->scan_wait);
-
- if (cciss_create_hba_sysfs_entry(h))
- goto clean0;
-
- /* configure PCI DMA stuff */
- if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64)))
- dac = 1;
- else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32)))
- dac = 0;
- else {
- dev_err(&h->pdev->dev, "no suitable DMA available\n");
- goto clean1;
- }
-
- /*
- * register with the major number, or get a dynamic major number
- * by passing 0 as argument. This is done for greater than
- * 8 controller support.
- */
- if (i < MAX_CTLR_ORIG)
- h->major = COMPAQ_CISS_MAJOR + i;
- rc = register_blkdev(h->major, h->devname);
- if (rc == -EBUSY || rc == -EINVAL) {
- dev_err(&h->pdev->dev,
- "Unable to get major number %d for %s "
- "on hba %d\n", h->major, h->devname, i);
- goto clean1;
- } else {
- if (i >= MAX_CTLR_ORIG)
- h->major = rc;
- }
-
- /* make sure the board interrupts are off */
- h->access.set_intr_mask(h, CCISS_INTR_OFF);
- rc = cciss_request_irq(h, do_cciss_msix_intr, do_cciss_intx);
- if (rc)
- goto clean2;
-
- dev_info(&h->pdev->dev, "%s: <0x%x> at PCI %s IRQ %d%s using DAC\n",
- h->devname, pdev->device, pci_name(pdev),
- h->intr[h->intr_mode], dac ? "" : " not");
-
- if (cciss_allocate_cmd_pool(h))
- goto clean4;
-
- if (cciss_allocate_scatterlists(h))
- goto clean4;
-
- h->cmd_sg_list = cciss_allocate_sg_chain_blocks(h,
- h->chainsize, h->nr_cmds);
- if (!h->cmd_sg_list && h->chainsize > 0)
- goto clean4;
-
- spin_lock_init(&h->lock);
-
- /* Initialize the pdev driver private data.
- have it point to h. */
- pci_set_drvdata(pdev, h);
- /* command and error info recs zeroed out before
- they are used */
- bitmap_zero(h->cmd_pool_bits, h->nr_cmds);
-
- h->num_luns = 0;
- h->highest_lun = -1;
- for (j = 0; j < CISS_MAX_LUN; j++) {
- h->drv[j] = NULL;
- h->gendisk[j] = NULL;
- }
-
- /* At this point, the controller is ready to take commands.
- * Now, if reset_devices and the hard reset didn't work, try
- * the soft reset and see if that works.
- */
- if (try_soft_reset) {
-
- /* This is kind of gross. We may or may not get a completion
- * from the soft reset command, and if we do, then the value
- * from the fifo may or may not be valid. So, we wait 10 secs
- * after the reset throwing away any completions we get during
- * that time. Unregister the interrupt handler and register
- * fake ones to scoop up any residual completions.
- */
- spin_lock_irqsave(&h->lock, flags);
- h->access.set_intr_mask(h, CCISS_INTR_OFF);
- spin_unlock_irqrestore(&h->lock, flags);
- free_irq(h->intr[h->intr_mode], h);
- rc = cciss_request_irq(h, cciss_msix_discard_completions,
- cciss_intx_discard_completions);
- if (rc) {
- dev_warn(&h->pdev->dev, "Failed to request_irq after "
- "soft reset.\n");
- goto clean4;
- }
-
- rc = cciss_kdump_soft_reset(h);
- if (rc) {
- dev_warn(&h->pdev->dev, "Soft reset failed.\n");
- goto clean4;
- }
-
- dev_info(&h->pdev->dev, "Board READY.\n");
- dev_info(&h->pdev->dev,
- "Waiting for stale completions to drain.\n");
- h->access.set_intr_mask(h, CCISS_INTR_ON);
- msleep(10000);
- h->access.set_intr_mask(h, CCISS_INTR_OFF);
-
- rc = controller_reset_failed(h->cfgtable);
- if (rc)
- dev_info(&h->pdev->dev,
- "Soft reset appears to have failed.\n");
-
- /* since the controller's reset, we have to go back and re-init
- * everything. Easiest to just forget what we've done and do it
- * all over again.
- */
- cciss_undo_allocations_after_kdump_soft_reset(h);
- try_soft_reset = 0;
- if (rc)
- /* don't go to clean4, we already unallocated */
- return -ENODEV;
-
- goto reinit_after_soft_reset;
- }
-
- cciss_scsi_setup(h);
-
- /* Turn the interrupts on so we can service requests */
- h->access.set_intr_mask(h, CCISS_INTR_ON);
-
- /* Get the firmware version */
- inq_buff = kzalloc(sizeof(InquiryData_struct), GFP_KERNEL);
- if (inq_buff == NULL) {
- dev_err(&h->pdev->dev, "out of memory\n");
- goto clean4;
- }
-
- return_code = sendcmd_withirq(h, CISS_INQUIRY, inq_buff,
- sizeof(InquiryData_struct), 0, CTLR_LUNID, TYPE_CMD);
- if (return_code == IO_OK) {
- h->firm_ver[0] = inq_buff->data_byte[32];
- h->firm_ver[1] = inq_buff->data_byte[33];
- h->firm_ver[2] = inq_buff->data_byte[34];
- h->firm_ver[3] = inq_buff->data_byte[35];
- } else { /* send command failed */
- dev_warn(&h->pdev->dev, "unable to determine firmware"
- " version of controller\n");
- }
- kfree(inq_buff);
-
- cciss_procinit(h);
-
- h->cciss_max_sectors = 8192;
-
- rebuild_lun_table(h, 1, 0);
- cciss_engage_scsi(h);
- h->busy_initializing = 0;
- return 0;
-
-clean4:
- cciss_free_cmd_pool(h);
- cciss_free_scatterlists(h);
- cciss_free_sg_chain_blocks(h->cmd_sg_list, h->nr_cmds);
- free_irq(h->intr[h->intr_mode], h);
-clean2:
- unregister_blkdev(h->major, h->devname);
-clean1:
- cciss_destroy_hba_sysfs_entry(h);
-clean0:
- pci_release_regions(pdev);
-clean_no_release_regions:
- h->busy_initializing = 0;
-
- /*
- * Deliberately omit pci_disable_device(): it does something nasty to
- * Smart Array controllers that pci_enable_device does not undo
- */
- pci_set_drvdata(pdev, NULL);
- free_hba(h);
- return -ENODEV;
-}
-
-static void cciss_shutdown(struct pci_dev *pdev)
-{
- ctlr_info_t *h;
- char *flush_buf;
- int return_code;
-
- h = pci_get_drvdata(pdev);
- flush_buf = kzalloc(4, GFP_KERNEL);
- if (!flush_buf) {
- dev_warn(&h->pdev->dev, "cache not flushed, out of memory.\n");
- return;
- }
- /* write all data in the battery backed cache to disk */
- return_code = sendcmd_withirq(h, CCISS_CACHE_FLUSH, flush_buf,
- 4, 0, CTLR_LUNID, TYPE_CMD);
- kfree(flush_buf);
- if (return_code != IO_OK)
- dev_warn(&h->pdev->dev, "Error flushing cache\n");
- h->access.set_intr_mask(h, CCISS_INTR_OFF);
- free_irq(h->intr[h->intr_mode], h);
-}
-
-static int cciss_enter_simple_mode(struct ctlr_info *h)
-{
- u32 trans_support;
-
- trans_support = readl(&(h->cfgtable->TransportSupport));
- if (!(trans_support & SIMPLE_MODE))
- return -ENOTSUPP;
-
- h->max_commands = readl(&(h->cfgtable->CmdsOutMax));
- writel(CFGTBL_Trans_Simple, &(h->cfgtable->HostWrite.TransportRequest));
- writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
- cciss_wait_for_mode_change_ack(h);
- print_cfg_table(h);
- if (!(readl(&(h->cfgtable->TransportActive)) & CFGTBL_Trans_Simple)) {
- dev_warn(&h->pdev->dev, "unable to get board into simple mode\n");
- return -ENODEV;
- }
- h->transMethod = CFGTBL_Trans_Simple;
- return 0;
-}
-
-
-static void cciss_remove_one(struct pci_dev *pdev)
-{
- ctlr_info_t *h;
- int i, j;
-
- if (pci_get_drvdata(pdev) == NULL) {
- dev_err(&pdev->dev, "Unable to remove device\n");
- return;
- }
-
- h = pci_get_drvdata(pdev);
- i = h->ctlr;
- if (hba[i] == NULL) {
- dev_err(&pdev->dev, "device appears to already be removed\n");
- return;
- }
-
- mutex_lock(&h->busy_shutting_down);
-
- remove_from_scan_list(h);
- remove_proc_entry(h->devname, proc_cciss);
- unregister_blkdev(h->major, h->devname);
-
- /* remove it from the disk list */
- for (j = 0; j < CISS_MAX_LUN; j++) {
- struct gendisk *disk = h->gendisk[j];
- if (disk) {
- struct request_queue *q = disk->queue;
-
- if (disk->flags & GENHD_FL_UP) {
- cciss_destroy_ld_sysfs_entry(h, j, 1);
- del_gendisk(disk);
- }
- if (q)
- blk_cleanup_queue(q);
- }
- }
-
-#ifdef CONFIG_CISS_SCSI_TAPE
- cciss_unregister_scsi(h); /* unhook from SCSI subsystem */
-#endif
-
- cciss_shutdown(pdev);
-
- pci_free_irq_vectors(h->pdev);
-
- iounmap(h->transtable);
- iounmap(h->cfgtable);
- iounmap(h->vaddr);
-
- cciss_free_cmd_pool(h);
- /* Free up sg elements */
- for (j = 0; j < h->nr_cmds; j++)
- kfree(h->scatter_list[j]);
- kfree(h->scatter_list);
- cciss_free_sg_chain_blocks(h->cmd_sg_list, h->nr_cmds);
- kfree(h->blockFetchTable);
- if (h->reply_pool)
- pci_free_consistent(h->pdev, h->max_commands * sizeof(__u64),
- h->reply_pool, h->reply_pool_dhandle);
- /*
- * Deliberately omit pci_disable_device(): it does something nasty to
- * Smart Array controllers that pci_enable_device does not undo
- */
- pci_release_regions(pdev);
- pci_set_drvdata(pdev, NULL);
- cciss_destroy_hba_sysfs_entry(h);
- mutex_unlock(&h->busy_shutting_down);
- free_hba(h);
-}
-
-static struct pci_driver cciss_pci_driver = {
- .name = "cciss",
- .probe = cciss_init_one,
- .remove = cciss_remove_one,
- .id_table = cciss_pci_device_id, /* id_table */
- .shutdown = cciss_shutdown,
-};
-
-/*
- * This is it. Register the PCI driver information for the cards we control
- * the OS will call our registered routines when it finds one of our cards.
- */
-static int __init cciss_init(void)
-{
- int err;
-
- /*
- * The hardware requires that commands are aligned on a 64-bit
- * boundary. Given that we use pci_alloc_consistent() to allocate an
- * array of them, the size must be a multiple of 8 bytes.
- */
- BUILD_BUG_ON(sizeof(CommandList_struct) % COMMANDLIST_ALIGNMENT);
- printk(KERN_INFO DRIVER_NAME "\n");
-
- err = bus_register(&cciss_bus_type);
- if (err)
- return err;
-
- /* Start the scan thread */
- cciss_scan_thread = kthread_run(scan_thread, NULL, "cciss_scan");
- if (IS_ERR(cciss_scan_thread)) {
- err = PTR_ERR(cciss_scan_thread);
- goto err_bus_unregister;
- }
-
- /* Register for our PCI devices */
- err = pci_register_driver(&cciss_pci_driver);
- if (err)
- goto err_thread_stop;
-
- return err;
-
-err_thread_stop:
- kthread_stop(cciss_scan_thread);
-err_bus_unregister:
- bus_unregister(&cciss_bus_type);
-
- return err;
-}
-
-static void __exit cciss_cleanup(void)
-{
- int i;
-
- pci_unregister_driver(&cciss_pci_driver);
- /* double check that all controller entrys have been removed */
- for (i = 0; i < MAX_CTLR; i++) {
- if (hba[i] != NULL) {
- dev_warn(&hba[i]->pdev->dev,
- "had to remove controller\n");
- cciss_remove_one(hba[i]->pdev);
- }
- }
- kthread_stop(cciss_scan_thread);
- if (proc_cciss)
- remove_proc_entry("driver/cciss", NULL);
- bus_unregister(&cciss_bus_type);
-}
-
-module_init(cciss_init);
-module_exit(cciss_cleanup);
diff --git a/drivers/block/cciss.h b/drivers/block/cciss.h
deleted file mode 100644
index 24b5fd7..0000000
--- a/drivers/block/cciss.h
+++ /dev/null
@@ -1,433 +0,0 @@
-#ifndef CCISS_H
-#define CCISS_H
-
-#include <linux/genhd.h>
-#include <linux/mutex.h>
-
-#include "cciss_cmd.h"
-
-
-#define NWD_SHIFT 4
-#define MAX_PART (1 << NWD_SHIFT)
-
-#define IO_OK 0
-#define IO_ERROR 1
-#define IO_NEEDS_RETRY 3
-
-#define VENDOR_LEN 8
-#define MODEL_LEN 16
-#define REV_LEN 4
-
-struct ctlr_info;
-typedef struct ctlr_info ctlr_info_t;
-
-struct access_method {
- void (*submit_command)(ctlr_info_t *h, CommandList_struct *c);
- void (*set_intr_mask)(ctlr_info_t *h, unsigned long val);
- unsigned long (*fifo_full)(ctlr_info_t *h);
- bool (*intr_pending)(ctlr_info_t *h);
- unsigned long (*command_completed)(ctlr_info_t *h);
-};
-typedef struct _drive_info_struct
-{
- unsigned char LunID[8];
- int usage_count;
- struct request_queue *queue;
- sector_t nr_blocks;
- int block_size;
- int heads;
- int sectors;
- int cylinders;
- int raid_level; /* set to -1 to indicate that
- * the drive is not in use/configured
- */
- int busy_configuring; /* This is set when a drive is being removed
- * to prevent it from being opened or it's
- * queue from being started.
- */
- struct device dev;
- __u8 serial_no[16]; /* from inquiry page 0x83,
- * not necc. null terminated.
- */
- char vendor[VENDOR_LEN + 1]; /* SCSI vendor string */
- char model[MODEL_LEN + 1]; /* SCSI model string */
- char rev[REV_LEN + 1]; /* SCSI revision string */
- char device_initialized; /* indicates whether dev is initialized */
-} drive_info_struct;
-
-struct ctlr_info
-{
- int ctlr;
- char devname[8];
- char *product_name;
- char firm_ver[4]; /* Firmware version */
- struct pci_dev *pdev;
- __u32 board_id;
- void __iomem *vaddr;
- unsigned long paddr;
- int nr_cmds; /* Number of commands allowed on this controller */
- CfgTable_struct __iomem *cfgtable;
- int interrupts_enabled;
- int major;
- int max_commands;
- int commands_outstanding;
- int max_outstanding; /* Debug */
- int num_luns;
- int highest_lun;
- int usage_count; /* number of opens all all minor devices */
- /* Need space for temp sg list
- * number of scatter/gathers supported
- * number of scatter/gathers in chained block
- */
- struct scatterlist **scatter_list;
- int maxsgentries;
- int chainsize;
- int max_cmd_sgentries;
- SGDescriptor_struct **cmd_sg_list;
-
-# define PERF_MODE_INT 0
-# define DOORBELL_INT 1
-# define SIMPLE_MODE_INT 2
-# define MEMQ_MODE_INT 3
- unsigned int intr[4];
- int intr_mode;
- int cciss_max_sectors;
- BYTE cciss_read;
- BYTE cciss_write;
- BYTE cciss_read_capacity;
-
- /* information about each logical volume */
- drive_info_struct *drv[CISS_MAX_LUN];
-
- struct access_method access;
-
- /* queue and queue Info */
- struct list_head reqQ;
- struct list_head cmpQ;
- unsigned int Qdepth;
- unsigned int maxQsinceinit;
- unsigned int maxSG;
- spinlock_t lock;
-
- /* pointers to command and error info pool */
- CommandList_struct *cmd_pool;
- dma_addr_t cmd_pool_dhandle;
- ErrorInfo_struct *errinfo_pool;
- dma_addr_t errinfo_pool_dhandle;
- unsigned long *cmd_pool_bits;
- int nr_allocs;
- int nr_frees;
- int busy_configuring;
- int busy_initializing;
- int busy_scanning;
- struct mutex busy_shutting_down;
-
- /* This element holds the zero based queue number of the last
- * queue to be started. It is used for fairness.
- */
- int next_to_run;
-
- /* Disk structures we need to pass back */
- struct gendisk *gendisk[CISS_MAX_LUN];
-#ifdef CONFIG_CISS_SCSI_TAPE
- struct cciss_scsi_adapter_data_t *scsi_ctlr;
-#endif
- unsigned char alive;
- struct list_head scan_list;
- struct completion scan_wait;
- struct device dev;
- /*
- * Performant mode tables.
- */
- u32 trans_support;
- u32 trans_offset;
- struct TransTable_struct *transtable;
- unsigned long transMethod;
-
- /*
- * Performant mode completion buffer
- */
- u64 *reply_pool;
- dma_addr_t reply_pool_dhandle;
- u64 *reply_pool_head;
- size_t reply_pool_size;
- unsigned char reply_pool_wraparound;
- u32 *blockFetchTable;
-};
-
-/* Defining the diffent access_methods
- *
- * Memory mapped FIFO interface (SMART 53xx cards)
- */
-#define SA5_DOORBELL 0x20
-#define SA5_REQUEST_PORT_OFFSET 0x40
-#define SA5_REPLY_INTR_MASK_OFFSET 0x34
-#define SA5_REPLY_PORT_OFFSET 0x44
-#define SA5_INTR_STATUS 0x30
-#define SA5_SCRATCHPAD_OFFSET 0xB0
-
-#define SA5_CTCFG_OFFSET 0xB4
-#define SA5_CTMEM_OFFSET 0xB8
-
-#define SA5_INTR_OFF 0x08
-#define SA5B_INTR_OFF 0x04
-#define SA5_INTR_PENDING 0x08
-#define SA5B_INTR_PENDING 0x04
-#define FIFO_EMPTY 0xffffffff
-#define CCISS_FIRMWARE_READY 0xffff0000 /* value in scratchpad register */
-/* Perf. mode flags */
-#define SA5_PERF_INTR_PENDING 0x04
-#define SA5_PERF_INTR_OFF 0x05
-#define SA5_OUTDB_STATUS_PERF_BIT 0x01
-#define SA5_OUTDB_CLEAR_PERF_BIT 0x01
-#define SA5_OUTDB_CLEAR 0xA0
-#define SA5_OUTDB_CLEAR_PERF_BIT 0x01
-#define SA5_OUTDB_STATUS 0x9C
-
-
-#define CISS_ERROR_BIT 0x02
-
-#define CCISS_INTR_ON 1
-#define CCISS_INTR_OFF 0
-
-
-/* CCISS_BOARD_READY_WAIT_SECS is how long to wait for a board
- * to become ready, in seconds, before giving up on it.
- * CCISS_BOARD_READY_POLL_INTERVAL_MSECS * is how long to wait
- * between polling the board to see if it is ready, in
- * milliseconds. CCISS_BOARD_READY_ITERATIONS is derived
- * the above.
- */
-#define CCISS_BOARD_READY_WAIT_SECS (120)
-#define CCISS_BOARD_NOT_READY_WAIT_SECS (100)
-#define CCISS_BOARD_READY_POLL_INTERVAL_MSECS (100)
-#define CCISS_BOARD_READY_ITERATIONS \
- ((CCISS_BOARD_READY_WAIT_SECS * 1000) / \
- CCISS_BOARD_READY_POLL_INTERVAL_MSECS)
-#define CCISS_BOARD_NOT_READY_ITERATIONS \
- ((CCISS_BOARD_NOT_READY_WAIT_SECS * 1000) / \
- CCISS_BOARD_READY_POLL_INTERVAL_MSECS)
-#define CCISS_POST_RESET_PAUSE_MSECS (3000)
-#define CCISS_POST_RESET_NOOP_INTERVAL_MSECS (4000)
-#define CCISS_POST_RESET_NOOP_RETRIES (12)
-#define CCISS_POST_RESET_NOOP_TIMEOUT_MSECS (10000)
-
-/*
- Send the command to the hardware
-*/
-static void SA5_submit_command( ctlr_info_t *h, CommandList_struct *c)
-{
-#ifdef CCISS_DEBUG
- printk(KERN_WARNING "cciss%d: Sending %08x - down to controller\n",
- h->ctlr, c->busaddr);
-#endif /* CCISS_DEBUG */
- writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
- readl(h->vaddr + SA5_SCRATCHPAD_OFFSET);
- h->commands_outstanding++;
- if ( h->commands_outstanding > h->max_outstanding)
- h->max_outstanding = h->commands_outstanding;
-}
-
-/*
- * This card is the opposite of the other cards.
- * 0 turns interrupts on...
- * 0x08 turns them off...
- */
-static void SA5_intr_mask(ctlr_info_t *h, unsigned long val)
-{
- if (val)
- { /* Turn interrupts on */
- h->interrupts_enabled = 1;
- writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
- (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
- } else /* Turn them off */
- {
- h->interrupts_enabled = 0;
- writel( SA5_INTR_OFF,
- h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
- (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
- }
-}
-/*
- * This card is the opposite of the other cards.
- * 0 turns interrupts on...
- * 0x04 turns them off...
- */
-static void SA5B_intr_mask(ctlr_info_t *h, unsigned long val)
-{
- if (val)
- { /* Turn interrupts on */
- h->interrupts_enabled = 1;
- writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
- (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
- } else /* Turn them off */
- {
- h->interrupts_enabled = 0;
- writel( SA5B_INTR_OFF,
- h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
- (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
- }
-}
-
-/* Performant mode intr_mask */
-static void SA5_performant_intr_mask(ctlr_info_t *h, unsigned long val)
-{
- if (val) { /* turn on interrupts */
- h->interrupts_enabled = 1;
- writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
- (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
- } else {
- h->interrupts_enabled = 0;
- writel(SA5_PERF_INTR_OFF,
- h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
- (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
- }
-}
-
-/*
- * Returns true if fifo is full.
- *
- */
-static unsigned long SA5_fifo_full(ctlr_info_t *h)
-{
- if( h->commands_outstanding >= h->max_commands)
- return(1);
- else
- return(0);
-
-}
-/*
- * returns value read from hardware.
- * returns FIFO_EMPTY if there is nothing to read
- */
-static unsigned long SA5_completed(ctlr_info_t *h)
-{
- unsigned long register_value
- = readl(h->vaddr + SA5_REPLY_PORT_OFFSET);
- if(register_value != FIFO_EMPTY)
- {
- h->commands_outstanding--;
-#ifdef CCISS_DEBUG
- printk("cciss: Read %lx back from board\n", register_value);
-#endif /* CCISS_DEBUG */
- }
-#ifdef CCISS_DEBUG
- else
- {
- printk("cciss: FIFO Empty read\n");
- }
-#endif
- return ( register_value);
-
-}
-
-/* Performant mode command completed */
-static unsigned long SA5_performant_completed(ctlr_info_t *h)
-{
- unsigned long register_value = FIFO_EMPTY;
-
- /* flush the controller write of the reply queue by reading
- * outbound doorbell status register.
- */
- register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
- /* msi auto clears the interrupt pending bit. */
- if (!(h->pdev->msi_enabled || h->pdev->msix_enabled)) {
- writel(SA5_OUTDB_CLEAR_PERF_BIT, h->vaddr + SA5_OUTDB_CLEAR);
- /* Do a read in order to flush the write to the controller
- * (as per spec.)
- */
- register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
- }
-
- if ((*(h->reply_pool_head) & 1) == (h->reply_pool_wraparound)) {
- register_value = *(h->reply_pool_head);
- (h->reply_pool_head)++;
- h->commands_outstanding--;
- } else {
- register_value = FIFO_EMPTY;
- }
- /* Check for wraparound */
- if (h->reply_pool_head == (h->reply_pool + h->max_commands)) {
- h->reply_pool_head = h->reply_pool;
- h->reply_pool_wraparound ^= 1;
- }
-
- return register_value;
-}
-/*
- * Returns true if an interrupt is pending..
- */
-static bool SA5_intr_pending(ctlr_info_t *h)
-{
- unsigned long register_value =
- readl(h->vaddr + SA5_INTR_STATUS);
-#ifdef CCISS_DEBUG
- printk("cciss: intr_pending %lx\n", register_value);
-#endif /* CCISS_DEBUG */
- if( register_value & SA5_INTR_PENDING)
- return 1;
- return 0 ;
-}
-
-/*
- * Returns true if an interrupt is pending..
- */
-static bool SA5B_intr_pending(ctlr_info_t *h)
-{
- unsigned long register_value =
- readl(h->vaddr + SA5_INTR_STATUS);
-#ifdef CCISS_DEBUG
- printk("cciss: intr_pending %lx\n", register_value);
-#endif /* CCISS_DEBUG */
- if( register_value & SA5B_INTR_PENDING)
- return 1;
- return 0 ;
-}
-
-static bool SA5_performant_intr_pending(ctlr_info_t *h)
-{
- unsigned long register_value = readl(h->vaddr + SA5_INTR_STATUS);
-
- if (!register_value)
- return false;
-
- if (h->pdev->msi_enabled || h->pdev->msix_enabled)
- return true;
-
- /* Read outbound doorbell to flush */
- register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
- return register_value & SA5_OUTDB_STATUS_PERF_BIT;
-}
-
-static struct access_method SA5_access = {
- .submit_command = SA5_submit_command,
- .set_intr_mask = SA5_intr_mask,
- .fifo_full = SA5_fifo_full,
- .intr_pending = SA5_intr_pending,
- .command_completed = SA5_completed,
-};
-
-static struct access_method SA5B_access = {
- .submit_command = SA5_submit_command,
- .set_intr_mask = SA5B_intr_mask,
- .fifo_full = SA5_fifo_full,
- .intr_pending = SA5B_intr_pending,
- .command_completed = SA5_completed,
-};
-
-static struct access_method SA5_performant_access = {
- .submit_command = SA5_submit_command,
- .set_intr_mask = SA5_performant_intr_mask,
- .fifo_full = SA5_fifo_full,
- .intr_pending = SA5_performant_intr_pending,
- .command_completed = SA5_performant_completed,
-};
-
-struct board_type {
- __u32 board_id;
- char *product_name;
- struct access_method *access;
- int nr_cmds; /* Max cmds this kind of ctlr can handle. */
-};
-
-#endif /* CCISS_H */
diff --git a/drivers/block/cciss_cmd.h b/drivers/block/cciss_cmd.h
deleted file mode 100644
index d9be6b4..0000000
--- a/drivers/block/cciss_cmd.h
+++ /dev/null
@@ -1,269 +0,0 @@
-#ifndef CCISS_CMD_H
-#define CCISS_CMD_H
-
-#include <linux/cciss_defs.h>
-
-/* DEFINES */
-#define CISS_VERSION "1.00"
-
-/* general boundary definitions */
-#define MAXSGENTRIES 32
-#define CCISS_SG_CHAIN 0x80000000
-#define MAXREPLYQS 256
-
-/* Unit Attentions ASC's as defined for the MSA2012sa */
-#define POWER_OR_RESET 0x29
-#define STATE_CHANGED 0x2a
-#define UNIT_ATTENTION_CLEARED 0x2f
-#define LUN_FAILED 0x3e
-#define REPORT_LUNS_CHANGED 0x3f
-
-/* Unit Attentions ASCQ's as defined for the MSA2012sa */
-
- /* These ASCQ's defined for ASC = POWER_OR_RESET */
-#define POWER_ON_RESET 0x00
-#define POWER_ON_REBOOT 0x01
-#define SCSI_BUS_RESET 0x02
-#define MSA_TARGET_RESET 0x03
-#define CONTROLLER_FAILOVER 0x04
-#define TRANSCEIVER_SE 0x05
-#define TRANSCEIVER_LVD 0x06
-
- /* These ASCQ's defined for ASC = STATE_CHANGED */
-#define RESERVATION_PREEMPTED 0x03
-#define ASYM_ACCESS_CHANGED 0x06
-#define LUN_CAPACITY_CHANGED 0x09
-
-/* config space register offsets */
-#define CFG_VENDORID 0x00
-#define CFG_DEVICEID 0x02
-#define CFG_I2OBAR 0x10
-#define CFG_MEM1BAR 0x14
-
-/* i2o space register offsets */
-#define I2O_IBDB_SET 0x20
-#define I2O_IBDB_CLEAR 0x70
-#define I2O_INT_STATUS 0x30
-#define I2O_INT_MASK 0x34
-#define I2O_IBPOST_Q 0x40
-#define I2O_OBPOST_Q 0x44
-#define I2O_DMA1_CFG 0x214
-
-/* Configuration Table */
-#define CFGTBL_ChangeReq 0x00000001l
-#define CFGTBL_AccCmds 0x00000001l
-#define DOORBELL_CTLR_RESET 0x00000004l
-#define DOORBELL_CTLR_RESET2 0x00000020l
-
-#define CFGTBL_Trans_Simple 0x00000002l
-#define CFGTBL_Trans_Performant 0x00000004l
-#define CFGTBL_Trans_use_short_tags 0x20000000l
-
-#define CFGTBL_BusType_Ultra2 0x00000001l
-#define CFGTBL_BusType_Ultra3 0x00000002l
-#define CFGTBL_BusType_Fibre1G 0x00000100l
-#define CFGTBL_BusType_Fibre2G 0x00000200l
-typedef struct _vals32
-{
- __u32 lower;
- __u32 upper;
-} vals32;
-
-typedef union _u64bit
-{
- vals32 val32;
- __u64 val;
-} u64bit;
-
-/* Type defs used in the following structs */
-#define QWORD vals32
-
-/* STRUCTURES */
-#define CISS_MAX_PHYS_LUN 1024
-/* SCSI-3 Cmmands */
-
-#pragma pack(1)
-
-#define CISS_INQUIRY 0x12
-/* Date returned */
-typedef struct _InquiryData_struct
-{
- BYTE data_byte[36];
-} InquiryData_struct;
-
-#define CISS_REPORT_LOG 0xc2 /* Report Logical LUNs */
-#define CISS_REPORT_PHYS 0xc3 /* Report Physical LUNs */
-/* Data returned */
-typedef struct _ReportLUNdata_struct
-{
- BYTE LUNListLength[4];
- DWORD reserved;
- BYTE LUN[CISS_MAX_LUN][8];
-} ReportLunData_struct;
-
-#define CCISS_READ_CAPACITY 0x25 /* Read Capacity */
-typedef struct _ReadCapdata_struct
-{
- BYTE total_size[4]; /* Total size in blocks */
- BYTE block_size[4]; /* Size of blocks in bytes */
-} ReadCapdata_struct;
-
-#define CCISS_READ_CAPACITY_16 0x9e /* Read Capacity 16 */
-
-/* service action to differentiate a 16 byte read capacity from
- other commands that use the 0x9e SCSI op code */
-
-#define CCISS_READ_CAPACITY_16_SERVICE_ACT 0x10
-
-typedef struct _ReadCapdata_struct_16
-{
- BYTE total_size[8]; /* Total size in blocks */
- BYTE block_size[4]; /* Size of blocks in bytes */
- BYTE prot_en:1; /* protection enable bit */
- BYTE rto_en:1; /* reference tag own enable bit */
- BYTE reserved:6; /* reserved bits */
- BYTE reserved2[18]; /* reserved bytes per spec */
-} ReadCapdata_struct_16;
-
-/* Define the supported read/write commands for cciss based controllers */
-
-#define CCISS_READ_10 0x28 /* Read(10) */
-#define CCISS_WRITE_10 0x2a /* Write(10) */
-#define CCISS_READ_16 0x88 /* Read(16) */
-#define CCISS_WRITE_16 0x8a /* Write(16) */
-
-/* Define the CDB lengths supported by cciss based controllers */
-
-#define CDB_LEN10 10
-#define CDB_LEN16 16
-
-/* BMIC commands */
-#define BMIC_READ 0x26
-#define BMIC_WRITE 0x27
-#define BMIC_CACHE_FLUSH 0xc2
-#define CCISS_CACHE_FLUSH 0x01 /* C2 was already being used by CCISS */
-
-#define CCISS_ABORT_MSG 0x00
-#define CCISS_RESET_MSG 0x01
-#define CCISS_RESET_TYPE_CONTROLLER 0x00
-#define CCISS_RESET_TYPE_BUS 0x01
-#define CCISS_RESET_TYPE_TARGET 0x03
-#define CCISS_RESET_TYPE_LUN 0x04
-#define CCISS_NOOP_MSG 0x03
-
-/* Command List Structure */
-#define CTLR_LUNID "\0\0\0\0\0\0\0\0"
-
-typedef struct _CommandListHeader_struct {
- BYTE ReplyQueue;
- BYTE SGList;
- HWORD SGTotal;
- QWORD Tag;
- LUNAddr_struct LUN;
-} CommandListHeader_struct;
-typedef struct _ErrDescriptor_struct {
- QWORD Addr;
- DWORD Len;
-} ErrDescriptor_struct;
-typedef struct _SGDescriptor_struct {
- QWORD Addr;
- DWORD Len;
- DWORD Ext;
-} SGDescriptor_struct;
-
-/* Command types */
-#define CMD_RWREQ 0x00
-#define CMD_IOCTL_PEND 0x01
-#define CMD_SCSI 0x03
-#define CMD_MSG_DONE 0x04
-#define CMD_MSG_TIMEOUT 0x05
-#define CMD_MSG_STALE 0xff
-
-/* This structure needs to be divisible by COMMANDLIST_ALIGNMENT
- * because low bits of the address are used to to indicate that
- * whether the tag contains an index or an address. PAD_32 and
- * PAD_64 can be adjusted independently as needed for 32-bit
- * and 64-bits systems.
- */
-#define COMMANDLIST_ALIGNMENT (32)
-#define IS_64_BIT ((sizeof(long) - 4)/4)
-#define IS_32_BIT (!IS_64_BIT)
-#define PAD_32 (0)
-#define PAD_64 (4)
-#define PADSIZE (IS_32_BIT * PAD_32 + IS_64_BIT * PAD_64)
-#define DIRECT_LOOKUP_BIT 0x10
-#define DIRECT_LOOKUP_SHIFT 5
-
-typedef struct _CommandList_struct {
- CommandListHeader_struct Header;
- RequestBlock_struct Request;
- ErrDescriptor_struct ErrDesc;
- SGDescriptor_struct SG[MAXSGENTRIES];
- /* information associated with the command */
- __u32 busaddr; /* physical address of this record */
- ErrorInfo_struct * err_info; /* pointer to the allocated mem */
- int ctlr;
- int cmd_type;
- long cmdindex;
- struct list_head list;
- struct request * rq;
- struct completion *waiting;
- int retry_count;
- void * scsi_cmd;
- char pad[PADSIZE];
-} CommandList_struct;
-
-/* Configuration Table Structure */
-typedef struct _HostWrite_struct {
- DWORD TransportRequest;
- DWORD Reserved;
- DWORD CoalIntDelay;
- DWORD CoalIntCount;
-} HostWrite_struct;
-
-typedef struct _CfgTable_struct {
- BYTE Signature[4];
- DWORD SpecValence;
-#define SIMPLE_MODE 0x02
-#define PERFORMANT_MODE 0x04
-#define MEMQ_MODE 0x08
- DWORD TransportSupport;
- DWORD TransportActive;
- HostWrite_struct HostWrite;
- DWORD CmdsOutMax;
- DWORD BusTypes;
- DWORD TransMethodOffset;
- BYTE ServerName[16];
- DWORD HeartBeat;
- DWORD SCSI_Prefetch;
- DWORD MaxSGElements;
- DWORD MaxLogicalUnits;
- DWORD MaxPhysicalDrives;
- DWORD MaxPhysicalDrivesPerLogicalUnit;
- DWORD MaxPerformantModeCommands;
- u8 reserved[0x78 - 0x58];
- u32 misc_fw_support; /* offset 0x78 */
-#define MISC_FW_DOORBELL_RESET (0x02)
-#define MISC_FW_DOORBELL_RESET2 (0x10)
- u8 driver_version[32];
-} CfgTable_struct;
-
-struct TransTable_struct {
- u32 BlockFetch0;
- u32 BlockFetch1;
- u32 BlockFetch2;
- u32 BlockFetch3;
- u32 BlockFetch4;
- u32 BlockFetch5;
- u32 BlockFetch6;
- u32 BlockFetch7;
- u32 RepQSize;
- u32 RepQCount;
- u32 RepQCtrAddrLow32;
- u32 RepQCtrAddrHigh32;
- u32 RepQAddr0Low32;
- u32 RepQAddr0High32;
-};
-
-#pragma pack()
-#endif /* CCISS_CMD_H */
diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c
deleted file mode 100644
index 01a1f7e..0000000
--- a/drivers/block/cciss_scsi.c
+++ /dev/null
@@ -1,1653 +0,0 @@
-/*
- * Disk Array driver for HP Smart Array controllers, SCSI Tape module.
- * (C) Copyright 2001, 2007 Hewlett-Packard Development Company, L.P.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 300, Boston, MA
- * 02111-1307, USA.
- *
- * Questions/Comments/Bugfixes to iss_storagedev@hp.com
- *
- * Author: Stephen M. Cameron
- */
-#ifdef CONFIG_CISS_SCSI_TAPE
-
-/* Here we have code to present the driver as a scsi driver
- as it is simultaneously presented as a block driver. The
- reason for doing this is to allow access to SCSI tape drives
- through the array controller. Note in particular, neither
- physical nor logical disks are presented through the scsi layer. */
-
-#include <linux/timer.h>
-#include <linux/completion.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-
-#include <linux/atomic.h>
-
-#include <scsi/scsi_cmnd.h>
-#include <scsi/scsi_device.h>
-#include <scsi/scsi_host.h>
-
-#include "cciss_scsi.h"
-
-#define CCISS_ABORT_MSG 0x00
-#define CCISS_RESET_MSG 0x01
-
-static int fill_cmd(ctlr_info_t *h, CommandList_struct *c, __u8 cmd, void *buff,
- size_t size,
- __u8 page_code, unsigned char *scsi3addr,
- int cmd_type);
-
-static CommandList_struct *cmd_alloc(ctlr_info_t *h);
-static CommandList_struct *cmd_special_alloc(ctlr_info_t *h);
-static void cmd_free(ctlr_info_t *h, CommandList_struct *c);
-static void cmd_special_free(ctlr_info_t *h, CommandList_struct *c);
-
-static int cciss_scsi_write_info(struct Scsi_Host *sh,
- char *buffer, /* data buffer */
- int length); /* length of data in buffer */
-static int cciss_scsi_show_info(struct seq_file *m,
- struct Scsi_Host *sh);
-
-static int cciss_scsi_queue_command (struct Scsi_Host *h,
- struct scsi_cmnd *cmd);
-static int cciss_eh_device_reset_handler(struct scsi_cmnd *);
-static int cciss_eh_abort_handler(struct scsi_cmnd *);
-
-static struct cciss_scsi_hba_t ccissscsi[MAX_CTLR] = {
- { .name = "cciss0", .ndevices = 0 },
- { .name = "cciss1", .ndevices = 0 },
- { .name = "cciss2", .ndevices = 0 },
- { .name = "cciss3", .ndevices = 0 },
- { .name = "cciss4", .ndevices = 0 },
- { .name = "cciss5", .ndevices = 0 },
- { .name = "cciss6", .ndevices = 0 },
- { .name = "cciss7", .ndevices = 0 },
-};
-
-static struct scsi_host_template cciss_driver_template = {
- .module = THIS_MODULE,
- .name = "cciss",
- .proc_name = "cciss",
- .write_info = cciss_scsi_write_info,
- .show_info = cciss_scsi_show_info,
- .queuecommand = cciss_scsi_queue_command,
- .this_id = 7,
- .use_clustering = DISABLE_CLUSTERING,
- /* Can't have eh_bus_reset_handler or eh_host_reset_handler for cciss */
- .eh_device_reset_handler= cciss_eh_device_reset_handler,
- .eh_abort_handler = cciss_eh_abort_handler,
-};
-
-#pragma pack(1)
-
-#define SCSI_PAD_32 8
-#define SCSI_PAD_64 8
-
-struct cciss_scsi_cmd_stack_elem_t {
- CommandList_struct cmd;
- ErrorInfo_struct Err;
- __u32 busaddr;
- int cmdindex;
- u8 pad[IS_32_BIT * SCSI_PAD_32 + IS_64_BIT * SCSI_PAD_64];
-};
-
-#pragma pack()
-
-#pragma pack(1)
-struct cciss_scsi_cmd_stack_t {
- struct cciss_scsi_cmd_stack_elem_t *pool;
- struct cciss_scsi_cmd_stack_elem_t **elem;
- dma_addr_t cmd_pool_handle;
- int top;
- int nelems;
-};
-#pragma pack()
-
-struct cciss_scsi_adapter_data_t {
- struct Scsi_Host *scsi_host;
- struct cciss_scsi_cmd_stack_t cmd_stack;
- SGDescriptor_struct **cmd_sg_list;
- int registered;
- spinlock_t lock; // to protect ccissscsi[ctlr];
-};
-
-#define CPQ_TAPE_LOCK(h, flags) spin_lock_irqsave( \
- &h->scsi_ctlr->lock, flags);
-#define CPQ_TAPE_UNLOCK(h, flags) spin_unlock_irqrestore( \
- &h->scsi_ctlr->lock, flags);
-
-static CommandList_struct *
-scsi_cmd_alloc(ctlr_info_t *h)
-{
- /* assume only one process in here at a time, locking done by caller. */
- /* use h->lock */
- /* might be better to rewrite how we allocate scsi commands in a way that */
- /* needs no locking at all. */
-
- /* take the top memory chunk off the stack and return it, if any. */
- struct cciss_scsi_cmd_stack_elem_t *c;
- struct cciss_scsi_adapter_data_t *sa;
- struct cciss_scsi_cmd_stack_t *stk;
- u64bit temp64;
-
- sa = h->scsi_ctlr;
- stk = &sa->cmd_stack;
-
- if (stk->top < 0)
- return NULL;
- c = stk->elem[stk->top];
- /* memset(c, 0, sizeof(*c)); */
- memset(&c->cmd, 0, sizeof(c->cmd));
- memset(&c->Err, 0, sizeof(c->Err));
- /* set physical addr of cmd and addr of scsi parameters */
- c->cmd.busaddr = c->busaddr;
- c->cmd.cmdindex = c->cmdindex;
- /* (__u32) (stk->cmd_pool_handle +
- (sizeof(struct cciss_scsi_cmd_stack_elem_t)*stk->top)); */
-
- temp64.val = (__u64) (c->busaddr + sizeof(CommandList_struct));
- /* (__u64) (stk->cmd_pool_handle +
- (sizeof(struct cciss_scsi_cmd_stack_elem_t)*stk->top) +
- sizeof(CommandList_struct)); */
- stk->top--;
- c->cmd.ErrDesc.Addr.lower = temp64.val32.lower;
- c->cmd.ErrDesc.Addr.upper = temp64.val32.upper;
- c->cmd.ErrDesc.Len = sizeof(ErrorInfo_struct);
-
- c->cmd.ctlr = h->ctlr;
- c->cmd.err_info = &c->Err;
-
- return (CommandList_struct *) c;
-}
-
-static void
-scsi_cmd_free(ctlr_info_t *h, CommandList_struct *c)
-{
- /* assume only one process in here at a time, locking done by caller. */
- /* use h->lock */
- /* drop the free memory chunk on top of the stack. */
-
- struct cciss_scsi_adapter_data_t *sa;
- struct cciss_scsi_cmd_stack_t *stk;
-
- sa = h->scsi_ctlr;
- stk = &sa->cmd_stack;
- stk->top++;
- if (stk->top >= stk->nelems) {
- dev_err(&h->pdev->dev,
- "scsi_cmd_free called too many times.\n");
- BUG();
- }
- stk->elem[stk->top] = (struct cciss_scsi_cmd_stack_elem_t *) c;
-}
-
-static int
-scsi_cmd_stack_setup(ctlr_info_t *h, struct cciss_scsi_adapter_data_t *sa)
-{
- int i;
- struct cciss_scsi_cmd_stack_t *stk;
- size_t size;
-
- stk = &sa->cmd_stack;
- stk->nelems = cciss_tape_cmds + 2;
- sa->cmd_sg_list = cciss_allocate_sg_chain_blocks(h,
- h->chainsize, stk->nelems);
- if (!sa->cmd_sg_list && h->chainsize > 0)
- return -ENOMEM;
-
- size = sizeof(struct cciss_scsi_cmd_stack_elem_t) * stk->nelems;
-
- /* Check alignment, see cciss_cmd.h near CommandList_struct def. */
- BUILD_BUG_ON((sizeof(*stk->pool) % COMMANDLIST_ALIGNMENT) != 0);
- /* pci_alloc_consistent guarantees 32-bit DMA address will be used */
- stk->pool = (struct cciss_scsi_cmd_stack_elem_t *)
- pci_alloc_consistent(h->pdev, size, &stk->cmd_pool_handle);
-
- if (stk->pool == NULL) {
- cciss_free_sg_chain_blocks(sa->cmd_sg_list, stk->nelems);
- sa->cmd_sg_list = NULL;
- return -ENOMEM;
- }
- stk->elem = kmalloc(sizeof(stk->elem[0]) * stk->nelems, GFP_KERNEL);
- if (!stk->elem) {
- pci_free_consistent(h->pdev, size, stk->pool,
- stk->cmd_pool_handle);
- return -1;
- }
- for (i = 0; i < stk->nelems; i++) {
- stk->elem[i] = &stk->pool[i];
- stk->elem[i]->busaddr = (__u32) (stk->cmd_pool_handle +
- (sizeof(struct cciss_scsi_cmd_stack_elem_t) * i));
- stk->elem[i]->cmdindex = i;
- }
- stk->top = stk->nelems-1;
- return 0;
-}
-
-static void
-scsi_cmd_stack_free(ctlr_info_t *h)
-{
- struct cciss_scsi_adapter_data_t *sa;
- struct cciss_scsi_cmd_stack_t *stk;
- size_t size;
-
- sa = h->scsi_ctlr;
- stk = &sa->cmd_stack;
- if (stk->top != stk->nelems-1) {
- dev_warn(&h->pdev->dev,
- "bug: %d scsi commands are still outstanding.\n",
- stk->nelems - stk->top);
- }
- size = sizeof(struct cciss_scsi_cmd_stack_elem_t) * stk->nelems;
-
- pci_free_consistent(h->pdev, size, stk->pool, stk->cmd_pool_handle);
- stk->pool = NULL;
- cciss_free_sg_chain_blocks(sa->cmd_sg_list, stk->nelems);
- kfree(stk->elem);
- stk->elem = NULL;
-}
-
-#if 0
-static void
-print_cmd(CommandList_struct *cp)
-{
- printk("queue:%d\n", cp->Header.ReplyQueue);
- printk("sglist:%d\n", cp->Header.SGList);
- printk("sgtot:%d\n", cp->Header.SGTotal);
- printk("Tag:0x%08x/0x%08x\n", cp->Header.Tag.upper,
- cp->Header.Tag.lower);
- printk("LUN:0x%8phN\n", cp->Header.LUN.LunAddrBytes);
- printk("CDBLen:%d\n", cp->Request.CDBLen);
- printk("Type:%d\n",cp->Request.Type.Type);
- printk("Attr:%d\n",cp->Request.Type.Attribute);
- printk(" Dir:%d\n",cp->Request.Type.Direction);
- printk("Timeout:%d\n",cp->Request.Timeout);
- printk("CDB: %16ph\n", cp->Request.CDB);
- printk("edesc.Addr: 0x%08x/0%08x, Len = %d\n",
- cp->ErrDesc.Addr.upper, cp->ErrDesc.Addr.lower,
- cp->ErrDesc.Len);
- printk("sgs..........Errorinfo:\n");
- printk("scsistatus:%d\n", cp->err_info->ScsiStatus);
- printk("senselen:%d\n", cp->err_info->SenseLen);
- printk("cmd status:%d\n", cp->err_info->CommandStatus);
- printk("resid cnt:%d\n", cp->err_info->ResidualCnt);
- printk("offense size:%d\n", cp->err_info->MoreErrInfo.Invalid_Cmd.offense_size);
- printk("offense byte:%d\n", cp->err_info->MoreErrInfo.Invalid_Cmd.offense_num);
- printk("offense value:%d\n", cp->err_info->MoreErrInfo.Invalid_Cmd.offense_value);
-}
-#endif
-
-static int
-find_bus_target_lun(ctlr_info_t *h, int *bus, int *target, int *lun)
-{
- /* finds an unused bus, target, lun for a new device */
- /* assumes h->scsi_ctlr->lock is held */
- int i, found=0;
- unsigned char target_taken[CCISS_MAX_SCSI_DEVS_PER_HBA];
-
- memset(&target_taken[0], 0, CCISS_MAX_SCSI_DEVS_PER_HBA);
-
- target_taken[SELF_SCSI_ID] = 1;
- for (i = 0; i < ccissscsi[h->ctlr].ndevices; i++)
- target_taken[ccissscsi[h->ctlr].dev[i].target] = 1;
-
- for (i = 0; i < CCISS_MAX_SCSI_DEVS_PER_HBA; i++) {
- if (!target_taken[i]) {
- *bus = 0; *target=i; *lun = 0; found=1;
- break;
- }
- }
- return (!found);
-}
-struct scsi2map {
- char scsi3addr[8];
- int bus, target, lun;
-};
-
-static int
-cciss_scsi_add_entry(ctlr_info_t *h, int hostno,
- struct cciss_scsi_dev_t *device,
- struct scsi2map *added, int *nadded)
-{
- /* assumes h->scsi_ctlr->lock is held */
- int n = ccissscsi[h->ctlr].ndevices;
- struct cciss_scsi_dev_t *sd;
- int i, bus, target, lun;
- unsigned char addr1[8], addr2[8];
-
- if (n >= CCISS_MAX_SCSI_DEVS_PER_HBA) {
- dev_warn(&h->pdev->dev, "Too many devices, "
- "some will be inaccessible.\n");
- return -1;
- }
-
- bus = target = -1;
- lun = 0;
- /* Is this device a non-zero lun of a multi-lun device */
- /* byte 4 of the 8-byte LUN addr will contain the logical unit no. */
- if (device->scsi3addr[4] != 0) {
- /* Search through our list and find the device which */
- /* has the same 8 byte LUN address, excepting byte 4. */
- /* Assign the same bus and target for this new LUN. */
- /* Use the logical unit number from the firmware. */
- memcpy(addr1, device->scsi3addr, 8);
- addr1[4] = 0;
- for (i = 0; i < n; i++) {
- sd = &ccissscsi[h->ctlr].dev[i];
- memcpy(addr2, sd->scsi3addr, 8);
- addr2[4] = 0;
- /* differ only in byte 4? */
- if (memcmp(addr1, addr2, 8) == 0) {
- bus = sd->bus;
- target = sd->target;
- lun = device->scsi3addr[4];
- break;
- }
- }
- }
-
- sd = &ccissscsi[h->ctlr].dev[n];
- if (lun == 0) {
- if (find_bus_target_lun(h,
- &sd->bus, &sd->target, &sd->lun) != 0)
- return -1;
- } else {
- sd->bus = bus;
- sd->target = target;
- sd->lun = lun;
- }
- added[*nadded].bus = sd->bus;
- added[*nadded].target = sd->target;
- added[*nadded].lun = sd->lun;
- (*nadded)++;
-
- memcpy(sd->scsi3addr, device->scsi3addr, 8);
- memcpy(sd->vendor, device->vendor, sizeof(sd->vendor));
- memcpy(sd->revision, device->revision, sizeof(sd->revision));
- memcpy(sd->device_id, device->device_id, sizeof(sd->device_id));
- sd->devtype = device->devtype;
-
- ccissscsi[h->ctlr].ndevices++;
-
- /* initially, (before registering with scsi layer) we don't
- know our hostno and we don't want to print anything first
- time anyway (the scsi layer's inquiries will show that info) */
- if (hostno != -1)
- dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d added.\n",
- scsi_device_type(sd->devtype), hostno,
- sd->bus, sd->target, sd->lun);
- return 0;
-}
-
-static void
-cciss_scsi_remove_entry(ctlr_info_t *h, int hostno, int entry,
- struct scsi2map *removed, int *nremoved)
-{
- /* assumes h->ctlr]->scsi_ctlr->lock is held */
- int i;
- struct cciss_scsi_dev_t sd;
-
- if (entry < 0 || entry >= CCISS_MAX_SCSI_DEVS_PER_HBA) return;
- sd = ccissscsi[h->ctlr].dev[entry];
- removed[*nremoved].bus = sd.bus;
- removed[*nremoved].target = sd.target;
- removed[*nremoved].lun = sd.lun;
- (*nremoved)++;
- for (i = entry; i < ccissscsi[h->ctlr].ndevices-1; i++)
- ccissscsi[h->ctlr].dev[i] = ccissscsi[h->ctlr].dev[i+1];
- ccissscsi[h->ctlr].ndevices--;
- dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d removed.\n",
- scsi_device_type(sd.devtype), hostno,
- sd.bus, sd.target, sd.lun);
-}
-
-
-#define SCSI3ADDR_EQ(a,b) ( \
- (a)[7] == (b)[7] && \
- (a)[6] == (b)[6] && \
- (a)[5] == (b)[5] && \
- (a)[4] == (b)[4] && \
- (a)[3] == (b)[3] && \
- (a)[2] == (b)[2] && \
- (a)[1] == (b)[1] && \
- (a)[0] == (b)[0])
-
-static void fixup_botched_add(ctlr_info_t *h, char *scsi3addr)
-{
- /* called when scsi_add_device fails in order to re-adjust */
- /* ccissscsi[] to match the mid layer's view. */
- unsigned long flags;
- int i, j;
- CPQ_TAPE_LOCK(h, flags);
- for (i = 0; i < ccissscsi[h->ctlr].ndevices; i++) {
- if (memcmp(scsi3addr,
- ccissscsi[h->ctlr].dev[i].scsi3addr, 8) == 0) {
- for (j = i; j < ccissscsi[h->ctlr].ndevices-1; j++)
- ccissscsi[h->ctlr].dev[j] =
- ccissscsi[h->ctlr].dev[j+1];
- ccissscsi[h->ctlr].ndevices--;
- break;
- }
- }
- CPQ_TAPE_UNLOCK(h, flags);
-}
-
-static int device_is_the_same(struct cciss_scsi_dev_t *dev1,
- struct cciss_scsi_dev_t *dev2)
-{
- return dev1->devtype == dev2->devtype &&
- memcmp(dev1->scsi3addr, dev2->scsi3addr,
- sizeof(dev1->scsi3addr)) == 0 &&
- memcmp(dev1->device_id, dev2->device_id,
- sizeof(dev1->device_id)) == 0 &&
- memcmp(dev1->vendor, dev2->vendor,
- sizeof(dev1->vendor)) == 0 &&
- memcmp(dev1->model, dev2->model,
- sizeof(dev1->model)) == 0 &&
- memcmp(dev1->revision, dev2->revision,
- sizeof(dev1->revision)) == 0;
-}
-
-static int
-adjust_cciss_scsi_table(ctlr_info_t *h, int hostno,
- struct cciss_scsi_dev_t sd[], int nsds)
-{
- /* sd contains scsi3 addresses and devtypes, but
- bus target and lun are not filled in. This funciton
- takes what's in sd to be the current and adjusts
- ccissscsi[] to be in line with what's in sd. */
-
- int i,j, found, changes=0;
- struct cciss_scsi_dev_t *csd;
- unsigned long flags;
- struct scsi2map *added, *removed;
- int nadded, nremoved;
- struct Scsi_Host *sh = NULL;
-
- added = kzalloc(sizeof(*added) * CCISS_MAX_SCSI_DEVS_PER_HBA,
- GFP_KERNEL);
- removed = kzalloc(sizeof(*removed) * CCISS_MAX_SCSI_DEVS_PER_HBA,
- GFP_KERNEL);
-
- if (!added || !removed) {
- dev_warn(&h->pdev->dev,
- "Out of memory in adjust_cciss_scsi_table\n");
- goto free_and_out;
- }
-
- CPQ_TAPE_LOCK(h, flags);
-
- if (hostno != -1) /* if it's not the first time... */
- sh = h->scsi_ctlr->scsi_host;
-
- /* find any devices in ccissscsi[] that are not in
- sd[] and remove them from ccissscsi[] */
-
- i = 0;
- nremoved = 0;
- nadded = 0;
- while (i < ccissscsi[h->ctlr].ndevices) {
- csd = &ccissscsi[h->ctlr].dev[i];
- found=0;
- for (j=0;j<nsds;j++) {
- if (SCSI3ADDR_EQ(sd[j].scsi3addr,
- csd->scsi3addr)) {
- if (device_is_the_same(&sd[j], csd))
- found=2;
- else
- found=1;
- break;
- }
- }
-
- if (found == 0) { /* device no longer present. */
- changes++;
- cciss_scsi_remove_entry(h, hostno, i,
- removed, &nremoved);
- /* remove ^^^, hence i not incremented */
- } else if (found == 1) { /* device is different in some way */
- changes++;
- dev_info(&h->pdev->dev,
- "device c%db%dt%dl%d has changed.\n",
- hostno, csd->bus, csd->target, csd->lun);
- cciss_scsi_remove_entry(h, hostno, i,
- removed, &nremoved);
- /* remove ^^^, hence i not incremented */
- if (cciss_scsi_add_entry(h, hostno, &sd[j],
- added, &nadded) != 0)
- /* we just removed one, so add can't fail. */
- BUG();
- csd->devtype = sd[j].devtype;
- memcpy(csd->device_id, sd[j].device_id,
- sizeof(csd->device_id));
- memcpy(csd->vendor, sd[j].vendor,
- sizeof(csd->vendor));
- memcpy(csd->model, sd[j].model,
- sizeof(csd->model));
- memcpy(csd->revision, sd[j].revision,
- sizeof(csd->revision));
- } else /* device is same as it ever was, */
- i++; /* so just move along. */
- }
-
- /* Now, make sure every device listed in sd[] is also
- listed in ccissscsi[], adding them if they aren't found */
-
- for (i=0;i<nsds;i++) {
- found=0;
- for (j = 0; j < ccissscsi[h->ctlr].ndevices; j++) {
- csd = &ccissscsi[h->ctlr].dev[j];
- if (SCSI3ADDR_EQ(sd[i].scsi3addr,
- csd->scsi3addr)) {
- if (device_is_the_same(&sd[i], csd))
- found=2; /* found device */
- else
- found=1; /* found a bug. */
- break;
- }
- }
- if (!found) {
- changes++;
- if (cciss_scsi_add_entry(h, hostno, &sd[i],
- added, &nadded) != 0)
- break;
- } else if (found == 1) {
- /* should never happen... */
- changes++;
- dev_warn(&h->pdev->dev,
- "device unexpectedly changed\n");
- /* but if it does happen, we just ignore that device */
- }
- }
- CPQ_TAPE_UNLOCK(h, flags);
-
- /* Don't notify scsi mid layer of any changes the first time through */
- /* (or if there are no changes) scsi_scan_host will do it later the */
- /* first time through. */
- if (hostno == -1 || !changes)
- goto free_and_out;
-
- /* Notify scsi mid layer of any removed devices */
- for (i = 0; i < nremoved; i++) {
- struct scsi_device *sdev =
- scsi_device_lookup(sh, removed[i].bus,
- removed[i].target, removed[i].lun);
- if (sdev != NULL) {
- scsi_remove_device(sdev);
- scsi_device_put(sdev);
- } else {
- /* We don't expect to get here. */
- /* future cmds to this device will get selection */
- /* timeout as if the device was gone. */
- dev_warn(&h->pdev->dev, "didn't find "
- "c%db%dt%dl%d\n for removal.",
- hostno, removed[i].bus,
- removed[i].target, removed[i].lun);
- }
- }
-
- /* Notify scsi mid layer of any added devices */
- for (i = 0; i < nadded; i++) {
- int rc;
- rc = scsi_add_device(sh, added[i].bus,
- added[i].target, added[i].lun);
- if (rc == 0)
- continue;
- dev_warn(&h->pdev->dev, "scsi_add_device "
- "c%db%dt%dl%d failed, device not added.\n",
- hostno, added[i].bus, added[i].target, added[i].lun);
- /* now we have to remove it from ccissscsi, */
- /* since it didn't get added to scsi mid layer */
- fixup_botched_add(h, added[i].scsi3addr);
- }
-
-free_and_out:
- kfree(added);
- kfree(removed);
- return 0;
-}
-
-static int
-lookup_scsi3addr(ctlr_info_t *h, int bus, int target, int lun, char *scsi3addr)
-{
- int i;
- struct cciss_scsi_dev_t *sd;
- unsigned long flags;
-
- CPQ_TAPE_LOCK(h, flags);
- for (i = 0; i < ccissscsi[h->ctlr].ndevices; i++) {
- sd = &ccissscsi[h->ctlr].dev[i];
- if (sd->bus == bus &&
- sd->target == target &&
- sd->lun == lun) {
- memcpy(scsi3addr, &sd->scsi3addr[0], 8);
- CPQ_TAPE_UNLOCK(h, flags);
- return 0;
- }
- }
- CPQ_TAPE_UNLOCK(h, flags);
- return -1;
-}
-
-static void
-cciss_scsi_setup(ctlr_info_t *h)
-{
- struct cciss_scsi_adapter_data_t * shba;
-
- ccissscsi[h->ctlr].ndevices = 0;
- shba = kmalloc(sizeof(*shba), GFP_KERNEL);
- if (shba == NULL)
- return;
- shba->scsi_host = NULL;
- spin_lock_init(&shba->lock);
- shba->registered = 0;
- if (scsi_cmd_stack_setup(h, shba) != 0) {
- kfree(shba);
- shba = NULL;
- }
- h->scsi_ctlr = shba;
- return;
-}
-
-static void complete_scsi_command(CommandList_struct *c, int timeout,
- __u32 tag)
-{
- struct scsi_cmnd *cmd;
- ctlr_info_t *h;
- ErrorInfo_struct *ei;
-
- ei = c->err_info;
-
- /* First, see if it was a message rather than a command */
- if (c->Request.Type.Type == TYPE_MSG) {
- c->cmd_type = CMD_MSG_DONE;
- return;
- }
-
- cmd = (struct scsi_cmnd *) c->scsi_cmd;
- h = hba[c->ctlr];
-
- scsi_dma_unmap(cmd);
- if (c->Header.SGTotal > h->max_cmd_sgentries)
- cciss_unmap_sg_chain_block(h, c);
-
- cmd->result = (DID_OK << 16); /* host byte */
- cmd->result |= (COMMAND_COMPLETE << 8); /* msg byte */
- /* cmd->result |= (GOOD < 1); */ /* status byte */
-
- cmd->result |= (ei->ScsiStatus);
- /* printk("Scsistatus is 0x%02x\n", ei->ScsiStatus); */
-
- /* copy the sense data whether we need to or not. */
-
- memcpy(cmd->sense_buffer, ei->SenseInfo,
- ei->SenseLen > SCSI_SENSE_BUFFERSIZE ?
- SCSI_SENSE_BUFFERSIZE :
- ei->SenseLen);
- scsi_set_resid(cmd, ei->ResidualCnt);
-
- if (ei->CommandStatus != 0) { /* an error has occurred */
- switch (ei->CommandStatus) {
- case CMD_TARGET_STATUS:
- /* Pass it up to the upper layers... */
- if (!ei->ScsiStatus) {
-
- /* Ordinarily, this case should never happen, but there is a bug
- in some released firmware revisions that allows it to happen
- if, for example, a 4100 backplane loses power and the tape
- drive is in it. We assume that it's a fatal error of some
- kind because we can't show that it wasn't. We will make it
- look like selection timeout since that is the most common
- reason for this to occur, and it's severe enough. */
-
- cmd->result = DID_NO_CONNECT << 16;
- }
- break;
- case CMD_DATA_UNDERRUN: /* let mid layer handle it. */
- break;
- case CMD_DATA_OVERRUN:
- dev_warn(&h->pdev->dev, "%p has"
- " completed with data overrun "
- "reported\n", c);
- break;
- case CMD_INVALID: {
- /*
- print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 1, c, sizeof(*c), false);
- print_cmd(c);
- */
- /* We get CMD_INVALID if you address a non-existent tape drive instead
- of a selection timeout (no response). You will see this if you yank
- out a tape drive, then try to access it. This is kind of a shame
- because it means that any other CMD_INVALID (e.g. driver bug) will
- get interpreted as a missing target. */
- cmd->result = DID_NO_CONNECT << 16;
- }
- break;
- case CMD_PROTOCOL_ERR:
- cmd->result = DID_ERROR << 16;
- dev_warn(&h->pdev->dev,
- "%p has protocol error\n", c);
- break;
- case CMD_HARDWARE_ERR:
- cmd->result = DID_ERROR << 16;
- dev_warn(&h->pdev->dev,
- "%p had hardware error\n", c);
- break;
- case CMD_CONNECTION_LOST:
- cmd->result = DID_ERROR << 16;
- dev_warn(&h->pdev->dev,
- "%p had connection lost\n", c);
- break;
- case CMD_ABORTED:
- cmd->result = DID_ABORT << 16;
- dev_warn(&h->pdev->dev, "%p was aborted\n", c);
- break;
- case CMD_ABORT_FAILED:
- cmd->result = DID_ERROR << 16;
- dev_warn(&h->pdev->dev,
- "%p reports abort failed\n", c);
- break;
- case CMD_UNSOLICITED_ABORT:
- cmd->result = DID_ABORT << 16;
- dev_warn(&h->pdev->dev, "%p aborted due to an "
- "unsolicited abort\n", c);
- break;
- case CMD_TIMEOUT:
- cmd->result = DID_TIME_OUT << 16;
- dev_warn(&h->pdev->dev, "%p timedout\n", c);
- break;
- case CMD_UNABORTABLE:
- cmd->result = DID_ERROR << 16;
- dev_warn(&h->pdev->dev, "c %p command "
- "unabortable\n", c);
- break;
- default:
- cmd->result = DID_ERROR << 16;
- dev_warn(&h->pdev->dev,
- "%p returned unknown status %x\n", c,
- ei->CommandStatus);
- }
- }
- cmd->scsi_done(cmd);
- scsi_cmd_free(h, c);
-}
-
-static int
-cciss_scsi_detect(ctlr_info_t *h)
-{
- struct Scsi_Host *sh;
- int error;
-
- sh = scsi_host_alloc(&cciss_driver_template, sizeof(struct ctlr_info *));
- if (sh == NULL)
- goto fail;
- sh->io_port = 0; // good enough? FIXME,
- sh->n_io_port = 0; // I don't think we use these two...
- sh->this_id = SELF_SCSI_ID;
- sh->can_queue = cciss_tape_cmds;
- sh->sg_tablesize = h->maxsgentries;
- sh->max_cmd_len = MAX_COMMAND_SIZE;
- sh->max_sectors = h->cciss_max_sectors;
-
- ((struct cciss_scsi_adapter_data_t *)
- h->scsi_ctlr)->scsi_host = sh;
- sh->hostdata[0] = (unsigned long) h;
- sh->irq = h->intr[SIMPLE_MODE_INT];
- sh->unique_id = sh->irq;
- error = scsi_add_host(sh, &h->pdev->dev);
- if (error)
- goto fail_host_put;
- scsi_scan_host(sh);
- return 1;
-
- fail_host_put:
- scsi_host_put(sh);
- fail:
- return 0;
-}
-
-static void
-cciss_unmap_one(struct pci_dev *pdev,
- CommandList_struct *c,
- size_t buflen,
- int data_direction)
-{
- u64bit addr64;
-
- addr64.val32.lower = c->SG[0].Addr.lower;
- addr64.val32.upper = c->SG[0].Addr.upper;
- pci_unmap_single(pdev, (dma_addr_t) addr64.val, buflen, data_direction);
-}
-
-static void
-cciss_map_one(struct pci_dev *pdev,
- CommandList_struct *c,
- unsigned char *buf,
- size_t buflen,
- int data_direction)
-{
- __u64 addr64;
-
- addr64 = (__u64) pci_map_single(pdev, buf, buflen, data_direction);
- c->SG[0].Addr.lower =
- (__u32) (addr64 & (__u64) 0x00000000FFFFFFFF);
- c->SG[0].Addr.upper =
- (__u32) ((addr64 >> 32) & (__u64) 0x00000000FFFFFFFF);
- c->SG[0].Len = buflen;
- c->Header.SGList = (__u8) 1; /* no. SGs contig in this cmd */
- c->Header.SGTotal = (__u16) 1; /* total sgs in this cmd list */
-}
-
-static int
-cciss_scsi_do_simple_cmd(ctlr_info_t *h,
- CommandList_struct *c,
- unsigned char *scsi3addr,
- unsigned char *cdb,
- unsigned char cdblen,
- unsigned char *buf, int bufsize,
- int direction)
-{
- DECLARE_COMPLETION_ONSTACK(wait);
-
- c->cmd_type = CMD_IOCTL_PEND; /* treat this like an ioctl */
- c->scsi_cmd = NULL;
- c->Header.ReplyQueue = 0; /* unused in simple mode */
- memcpy(&c->Header.LUN, scsi3addr, sizeof(c->Header.LUN));
- c->Header.Tag.lower = c->busaddr; /* Use k. address of cmd as tag */
- // Fill in the request block...
-
- /* printk("Using scsi3addr 0x%02x%0x2%0x2%0x2%0x2%0x2%0x2%0x2\n",
- scsi3addr[0], scsi3addr[1], scsi3addr[2], scsi3addr[3],
- scsi3addr[4], scsi3addr[5], scsi3addr[6], scsi3addr[7]); */
-
- memset(c->Request.CDB, 0, sizeof(c->Request.CDB));
- memcpy(c->Request.CDB, cdb, cdblen);
- c->Request.Timeout = 0;
- c->Request.CDBLen = cdblen;
- c->Request.Type.Type = TYPE_CMD;
- c->Request.Type.Attribute = ATTR_SIMPLE;
- c->Request.Type.Direction = direction;
-
- /* Fill in the SG list and do dma mapping */
- cciss_map_one(h->pdev, c, (unsigned char *) buf,
- bufsize, DMA_FROM_DEVICE);
-
- c->waiting = &wait;
- enqueue_cmd_and_start_io(h, c);
- wait_for_completion(&wait);
-
- /* undo the dma mapping */
- cciss_unmap_one(h->pdev, c, bufsize, DMA_FROM_DEVICE);
- return(0);
-}
-
-static void
-cciss_scsi_interpret_error(ctlr_info_t *h, CommandList_struct *c)
-{
- ErrorInfo_struct *ei;
-
- ei = c->err_info;
- switch (ei->CommandStatus) {
- case CMD_TARGET_STATUS:
- dev_warn(&h->pdev->dev,
- "cmd %p has completed with errors\n", c);
- dev_warn(&h->pdev->dev,
- "cmd %p has SCSI Status = %x\n",
- c, ei->ScsiStatus);
- if (ei->ScsiStatus == 0)
- dev_warn(&h->pdev->dev,
- "SCSI status is abnormally zero. "
- "(probably indicates selection timeout "
- "reported incorrectly due to a known "
- "firmware bug, circa July, 2001.)\n");
- break;
- case CMD_DATA_UNDERRUN: /* let mid layer handle it. */
- dev_info(&h->pdev->dev, "UNDERRUN\n");
- break;
- case CMD_DATA_OVERRUN:
- dev_warn(&h->pdev->dev, "%p has"
- " completed with data overrun "
- "reported\n", c);
- break;
- case CMD_INVALID: {
- /* controller unfortunately reports SCSI passthru's */
- /* to non-existent targets as invalid commands. */
- dev_warn(&h->pdev->dev,
- "%p is reported invalid (probably means "
- "target device no longer present)\n", c);
- /*
- print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 1, c, sizeof(*c), false);
- print_cmd(c);
- */
- }
- break;
- case CMD_PROTOCOL_ERR:
- dev_warn(&h->pdev->dev, "%p has protocol error\n", c);
- break;
- case CMD_HARDWARE_ERR:
- /* cmd->result = DID_ERROR << 16; */
- dev_warn(&h->pdev->dev, "%p had hardware error\n", c);
- break;
- case CMD_CONNECTION_LOST:
- dev_warn(&h->pdev->dev, "%p had connection lost\n", c);
- break;
- case CMD_ABORTED:
- dev_warn(&h->pdev->dev, "%p was aborted\n", c);
- break;
- case CMD_ABORT_FAILED:
- dev_warn(&h->pdev->dev,
- "%p reports abort failed\n", c);
- break;
- case CMD_UNSOLICITED_ABORT:
- dev_warn(&h->pdev->dev,
- "%p aborted due to an unsolicited abort\n", c);
- break;
- case CMD_TIMEOUT:
- dev_warn(&h->pdev->dev, "%p timedout\n", c);
- break;
- case CMD_UNABORTABLE:
- dev_warn(&h->pdev->dev,
- "%p unabortable\n", c);
- break;
- default:
- dev_warn(&h->pdev->dev,
- "%p returned unknown status %x\n",
- c, ei->CommandStatus);
- }
-}
-
-static int
-cciss_scsi_do_inquiry(ctlr_info_t *h, unsigned char *scsi3addr,
- unsigned char page, unsigned char *buf,
- unsigned char bufsize)
-{
- int rc;
- CommandList_struct *c;
- char cdb[6];
- ErrorInfo_struct *ei;
- unsigned long flags;
-
- spin_lock_irqsave(&h->lock, flags);
- c = scsi_cmd_alloc(h);
- spin_unlock_irqrestore(&h->lock, flags);
-
- if (c == NULL) { /* trouble... */
- printk("cmd_alloc returned NULL!\n");
- return -1;
- }
-
- ei = c->err_info;
-
- cdb[0] = CISS_INQUIRY;
- cdb[1] = (page != 0);
- cdb[2] = page;
- cdb[3] = 0;
- cdb[4] = bufsize;
- cdb[5] = 0;
- rc = cciss_scsi_do_simple_cmd(h, c, scsi3addr, cdb,
- 6, buf, bufsize, XFER_READ);
-
- if (rc != 0) return rc; /* something went wrong */
-
- if (ei->CommandStatus != 0 &&
- ei->CommandStatus != CMD_DATA_UNDERRUN) {
- cciss_scsi_interpret_error(h, c);
- rc = -1;
- }
- spin_lock_irqsave(&h->lock, flags);
- scsi_cmd_free(h, c);
- spin_unlock_irqrestore(&h->lock, flags);
- return rc;
-}
-
-/* Get the device id from inquiry page 0x83 */
-static int cciss_scsi_get_device_id(ctlr_info_t *h, unsigned char *scsi3addr,
- unsigned char *device_id, int buflen)
-{
- int rc;
- unsigned char *buf;
-
- if (buflen > 16)
- buflen = 16;
- buf = kzalloc(64, GFP_KERNEL);
- if (!buf)
- return -1;
- rc = cciss_scsi_do_inquiry(h, scsi3addr, 0x83, buf, 64);
- if (rc == 0)
- memcpy(device_id, &buf[8], buflen);
- kfree(buf);
- return rc != 0;
-}
-
-static int
-cciss_scsi_do_report_phys_luns(ctlr_info_t *h,
- ReportLunData_struct *buf, int bufsize)
-{
- int rc;
- CommandList_struct *c;
- unsigned char cdb[12];
- unsigned char scsi3addr[8];
- ErrorInfo_struct *ei;
- unsigned long flags;
-
- spin_lock_irqsave(&h->lock, flags);
- c = scsi_cmd_alloc(h);
- spin_unlock_irqrestore(&h->lock, flags);
- if (c == NULL) { /* trouble... */
- printk("cmd_alloc returned NULL!\n");
- return -1;
- }
-
- memset(&scsi3addr[0], 0, 8); /* address the controller */
- cdb[0] = CISS_REPORT_PHYS;
- cdb[1] = 0;
- cdb[2] = 0;
- cdb[3] = 0;
- cdb[4] = 0;
- cdb[5] = 0;
- cdb[6] = (bufsize >> 24) & 0xFF; //MSB
- cdb[7] = (bufsize >> 16) & 0xFF;
- cdb[8] = (bufsize >> 8) & 0xFF;
- cdb[9] = bufsize & 0xFF;
- cdb[10] = 0;
- cdb[11] = 0;
-
- rc = cciss_scsi_do_simple_cmd(h, c, scsi3addr,
- cdb, 12,
- (unsigned char *) buf,
- bufsize, XFER_READ);
-
- if (rc != 0) return rc; /* something went wrong */
-
- ei = c->err_info;
- if (ei->CommandStatus != 0 &&
- ei->CommandStatus != CMD_DATA_UNDERRUN) {
- cciss_scsi_interpret_error(h, c);
- rc = -1;
- }
- spin_lock_irqsave(&h->lock, flags);
- scsi_cmd_free(h, c);
- spin_unlock_irqrestore(&h->lock, flags);
- return rc;
-}
-
-static void
-cciss_update_non_disk_devices(ctlr_info_t *h, int hostno)
-{
- /* the idea here is we could get notified from /proc
- that some devices have changed, so we do a report
- physical luns cmd, and adjust our list of devices
- accordingly. (We can't rely on the scsi-mid layer just
- doing inquiries, because the "busses" that the scsi
- mid-layer probes are totally fabricated by this driver,
- so new devices wouldn't show up.
-
- the scsi3addr's of devices won't change so long as the
- adapter is not reset. That means we can rescan and
- tell which devices we already know about, vs. new
- devices, vs. disappearing devices.
-
- Also, if you yank out a tape drive, then put in a disk
- in it's place, (say, a configured volume from another
- array controller for instance) _don't_ poke this driver
- (so it thinks it's still a tape, but _do_ poke the scsi
- mid layer, so it does an inquiry... the scsi mid layer
- will see the physical disk. This would be bad. Need to
- think about how to prevent that. One idea would be to
- snoop all scsi responses and if an inquiry repsonse comes
- back that reports a disk, chuck it an return selection
- timeout instead and adjust our table... Not sure i like
- that though.
-
- */
-#define OBDR_TAPE_INQ_SIZE 49
-#define OBDR_TAPE_SIG "$DR-10"
- ReportLunData_struct *ld_buff;
- unsigned char *inq_buff;
- unsigned char scsi3addr[8];
- __u32 num_luns=0;
- unsigned char *ch;
- struct cciss_scsi_dev_t *currentsd, *this_device;
- int ncurrent=0;
- int reportlunsize = sizeof(*ld_buff) + CISS_MAX_PHYS_LUN * 8;
- int i;
-
- ld_buff = kzalloc(reportlunsize, GFP_KERNEL);
- inq_buff = kmalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL);
- currentsd = kzalloc(sizeof(*currentsd) *
- (CCISS_MAX_SCSI_DEVS_PER_HBA+1), GFP_KERNEL);
- if (ld_buff == NULL || inq_buff == NULL || currentsd == NULL) {
- printk(KERN_ERR "cciss: out of memory\n");
- goto out;
- }
- this_device = ¤tsd[CCISS_MAX_SCSI_DEVS_PER_HBA];
- if (cciss_scsi_do_report_phys_luns(h, ld_buff, reportlunsize) == 0) {
- ch = &ld_buff->LUNListLength[0];
- num_luns = ((ch[0]<<24) | (ch[1]<<16) | (ch[2]<<8) | ch[3]) / 8;
- if (num_luns > CISS_MAX_PHYS_LUN) {
- printk(KERN_WARNING
- "cciss: Maximum physical LUNs (%d) exceeded. "
- "%d LUNs ignored.\n", CISS_MAX_PHYS_LUN,
- num_luns - CISS_MAX_PHYS_LUN);
- num_luns = CISS_MAX_PHYS_LUN;
- }
- }
- else {
- printk(KERN_ERR "cciss: Report physical LUNs failed.\n");
- goto out;
- }
-
-
- /* adjust our table of devices */
- for (i = 0; i < num_luns; i++) {
- /* for each physical lun, do an inquiry */
- if (ld_buff->LUN[i][3] & 0xC0) continue;
- memset(inq_buff, 0, OBDR_TAPE_INQ_SIZE);
- memcpy(&scsi3addr[0], &ld_buff->LUN[i][0], 8);
-
- if (cciss_scsi_do_inquiry(h, scsi3addr, 0, inq_buff,
- (unsigned char) OBDR_TAPE_INQ_SIZE) != 0)
- /* Inquiry failed (msg printed already) */
- continue; /* so we will skip this device. */
-
- this_device->devtype = (inq_buff[0] & 0x1f);
- this_device->bus = -1;
- this_device->target = -1;
- this_device->lun = -1;
- memcpy(this_device->scsi3addr, scsi3addr, 8);
- memcpy(this_device->vendor, &inq_buff[8],
- sizeof(this_device->vendor));
- memcpy(this_device->model, &inq_buff[16],
- sizeof(this_device->model));
- memcpy(this_device->revision, &inq_buff[32],
- sizeof(this_device->revision));
- memset(this_device->device_id, 0,
- sizeof(this_device->device_id));
- cciss_scsi_get_device_id(h, scsi3addr,
- this_device->device_id, sizeof(this_device->device_id));
-
- switch (this_device->devtype) {
- case 0x05: /* CD-ROM */ {
-
- /* We don't *really* support actual CD-ROM devices,
- * just this "One Button Disaster Recovery" tape drive
- * which temporarily pretends to be a CD-ROM drive.
- * So we check that the device is really an OBDR tape
- * device by checking for "$DR-10" in bytes 43-48 of
- * the inquiry data.
- */
- char obdr_sig[7];
-
- strncpy(obdr_sig, &inq_buff[43], 6);
- obdr_sig[6] = '\0';
- if (strncmp(obdr_sig, OBDR_TAPE_SIG, 6) != 0)
- /* Not OBDR device, ignore it. */
- break;
- }
- /* fall through . . . */
- case 0x01: /* sequential access, (tape) */
- case 0x08: /* medium changer */
- if (ncurrent >= CCISS_MAX_SCSI_DEVS_PER_HBA) {
- printk(KERN_INFO "cciss%d: %s ignored, "
- "too many devices.\n", h->ctlr,
- scsi_device_type(this_device->devtype));
- break;
- }
- currentsd[ncurrent] = *this_device;
- ncurrent++;
- break;
- default:
- break;
- }
- }
-
- adjust_cciss_scsi_table(h, hostno, currentsd, ncurrent);
-out:
- kfree(inq_buff);
- kfree(ld_buff);
- kfree(currentsd);
- return;
-}
-
-static int
-is_keyword(char *ptr, int len, char *verb) // Thanks to ncr53c8xx.c
-{
- int verb_len = strlen(verb);
- if (len >= verb_len && !memcmp(verb,ptr,verb_len))
- return verb_len;
- else
- return 0;
-}
-
-static int
-cciss_scsi_user_command(ctlr_info_t *h, int hostno, char *buffer, int length)
-{
- int arg_len;
-
- if ((arg_len = is_keyword(buffer, length, "rescan")) != 0)
- cciss_update_non_disk_devices(h, hostno);
- else
- return -EINVAL;
- return length;
-}
-
-static int
-cciss_scsi_write_info(struct Scsi_Host *sh,
- char *buffer, /* data buffer */
- int length) /* length of data in buffer */
-{
- ctlr_info_t *h = (ctlr_info_t *) sh->hostdata[0];
- if (h == NULL) /* This really shouldn't ever happen. */
- return -EINVAL;
-
- return cciss_scsi_user_command(h, sh->host_no,
- buffer, length);
-}
-
-static int
-cciss_scsi_show_info(struct seq_file *m, struct Scsi_Host *sh)
-{
-
- ctlr_info_t *h = (ctlr_info_t *) sh->hostdata[0];
- int i;
-
- if (h == NULL) /* This really shouldn't ever happen. */
- return -EINVAL;
-
- seq_printf(m, "cciss%d: SCSI host: %d\n",
- h->ctlr, sh->host_no);
-
- /* this information is needed by apps to know which cciss
- device corresponds to which scsi host number without
- having to open a scsi target device node. The device
- information is not a duplicate of /proc/scsi/scsi because
- the two may be out of sync due to scsi hotplug, rather
- this info is for an app to be able to use to know how to
- get them back in sync. */
-
- for (i = 0; i < ccissscsi[h->ctlr].ndevices; i++) {
- struct cciss_scsi_dev_t *sd =
- &ccissscsi[h->ctlr].dev[i];
- seq_printf(m, "c%db%dt%dl%d %02d "
- "0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
- sh->host_no, sd->bus, sd->target, sd->lun,
- sd->devtype,
- sd->scsi3addr[0], sd->scsi3addr[1],
- sd->scsi3addr[2], sd->scsi3addr[3],
- sd->scsi3addr[4], sd->scsi3addr[5],
- sd->scsi3addr[6], sd->scsi3addr[7]);
- }
- return 0;
-}
-
-/* cciss_scatter_gather takes a struct scsi_cmnd, (cmd), and does the pci
- dma mapping and fills in the scatter gather entries of the
- cciss command, c. */
-
-static void cciss_scatter_gather(ctlr_info_t *h, CommandList_struct *c,
- struct scsi_cmnd *cmd)
-{
- unsigned int len;
- struct scatterlist *sg;
- __u64 addr64;
- int request_nsgs, i, chained, sg_index;
- struct cciss_scsi_adapter_data_t *sa = h->scsi_ctlr;
- SGDescriptor_struct *curr_sg;
-
- BUG_ON(scsi_sg_count(cmd) > h->maxsgentries);
-
- chained = 0;
- sg_index = 0;
- curr_sg = c->SG;
- request_nsgs = scsi_dma_map(cmd);
- if (request_nsgs) {
- scsi_for_each_sg(cmd, sg, request_nsgs, i) {
- if (sg_index + 1 == h->max_cmd_sgentries &&
- !chained && request_nsgs - i > 1) {
- chained = 1;
- sg_index = 0;
- curr_sg = sa->cmd_sg_list[c->cmdindex];
- }
- addr64 = (__u64) sg_dma_address(sg);
- len = sg_dma_len(sg);
- curr_sg[sg_index].Addr.lower =
- (__u32) (addr64 & 0x0FFFFFFFFULL);
- curr_sg[sg_index].Addr.upper =
- (__u32) ((addr64 >> 32) & 0x0FFFFFFFFULL);
- curr_sg[sg_index].Len = len;
- curr_sg[sg_index].Ext = 0;
- ++sg_index;
- }
- if (chained)
- cciss_map_sg_chain_block(h, c,
- sa->cmd_sg_list[c->cmdindex],
- (request_nsgs - (h->max_cmd_sgentries - 1)) *
- sizeof(SGDescriptor_struct));
- }
- /* track how many SG entries we are using */
- if (request_nsgs > h->maxSG)
- h->maxSG = request_nsgs;
- c->Header.SGTotal = (u16) request_nsgs + chained;
- if (request_nsgs > h->max_cmd_sgentries)
- c->Header.SGList = h->max_cmd_sgentries;
- else
- c->Header.SGList = c->Header.SGTotal;
- return;
-}
-
-
-static int
-cciss_scsi_queue_command_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
-{
- ctlr_info_t *h;
- int rc;
- unsigned char scsi3addr[8];
- CommandList_struct *c;
- unsigned long flags;
-
- // Get the ptr to our adapter structure (hba[i]) out of cmd->host.
- // We violate cmd->host privacy here. (Is there another way?)
- h = (ctlr_info_t *) cmd->device->host->hostdata[0];
-
- rc = lookup_scsi3addr(h, cmd->device->channel, cmd->device->id,
- cmd->device->lun, scsi3addr);
- if (rc != 0) {
- /* the scsi nexus does not match any that we presented... */
- /* pretend to mid layer that we got selection timeout */
- cmd->result = DID_NO_CONNECT << 16;
- done(cmd);
- /* we might want to think about registering controller itself
- as a processor device on the bus so sg binds to it. */
- return 0;
- }
-
- /* Ok, we have a reasonable scsi nexus, so send the cmd down, and
- see what the device thinks of it. */
-
- spin_lock_irqsave(&h->lock, flags);
- c = scsi_cmd_alloc(h);
- spin_unlock_irqrestore(&h->lock, flags);
- if (c == NULL) { /* trouble... */
- dev_warn(&h->pdev->dev, "scsi_cmd_alloc returned NULL!\n");
- /* FIXME: next 3 lines are -> BAD! <- */
- cmd->result = DID_NO_CONNECT << 16;
- done(cmd);
- return 0;
- }
-
- // Fill in the command list header
-
- cmd->scsi_done = done; // save this for use by completion code
-
- /* save c in case we have to abort it */
- cmd->host_scribble = (unsigned char *) c;
-
- c->cmd_type = CMD_SCSI;
- c->scsi_cmd = cmd;
- c->Header.ReplyQueue = 0; /* unused in simple mode */
- memcpy(&c->Header.LUN.LunAddrBytes[0], &scsi3addr[0], 8);
- c->Header.Tag.lower = c->busaddr; /* Use k. address of cmd as tag */
-
- // Fill in the request block...
-
- c->Request.Timeout = 0;
- memset(c->Request.CDB, 0, sizeof(c->Request.CDB));
- BUG_ON(cmd->cmd_len > sizeof(c->Request.CDB));
- c->Request.CDBLen = cmd->cmd_len;
- memcpy(c->Request.CDB, cmd->cmnd, cmd->cmd_len);
- c->Request.Type.Type = TYPE_CMD;
- c->Request.Type.Attribute = ATTR_SIMPLE;
- switch (cmd->sc_data_direction) {
- case DMA_TO_DEVICE:
- c->Request.Type.Direction = XFER_WRITE;
- break;
- case DMA_FROM_DEVICE:
- c->Request.Type.Direction = XFER_READ;
- break;
- case DMA_NONE:
- c->Request.Type.Direction = XFER_NONE;
- break;
- case DMA_BIDIRECTIONAL:
- // This can happen if a buggy application does a scsi passthru
- // and sets both inlen and outlen to non-zero. ( see
- // ../scsi/scsi_ioctl.c:scsi_ioctl_send_command() )
-
- c->Request.Type.Direction = XFER_RSVD;
- // This is technically wrong, and cciss controllers should
- // reject it with CMD_INVALID, which is the most correct
- // response, but non-fibre backends appear to let it
- // slide by, and give the same results as if this field
- // were set correctly. Either way is acceptable for
- // our purposes here.
-
- break;
-
- default:
- dev_warn(&h->pdev->dev, "unknown data direction: %d\n",
- cmd->sc_data_direction);
- BUG();
- break;
- }
- cciss_scatter_gather(h, c, cmd);
- enqueue_cmd_and_start_io(h, c);
- /* the cmd'll come back via intr handler in complete_scsi_command() */
- return 0;
-}
-
-static DEF_SCSI_QCMD(cciss_scsi_queue_command)
-
-static void cciss_unregister_scsi(ctlr_info_t *h)
-{
- struct cciss_scsi_adapter_data_t *sa;
- struct cciss_scsi_cmd_stack_t *stk;
- unsigned long flags;
-
- /* we are being forcibly unloaded, and may not refuse. */
-
- spin_lock_irqsave(&h->lock, flags);
- sa = h->scsi_ctlr;
- stk = &sa->cmd_stack;
-
- /* if we weren't ever actually registered, don't unregister */
- if (sa->registered) {
- spin_unlock_irqrestore(&h->lock, flags);
- scsi_remove_host(sa->scsi_host);
- scsi_host_put(sa->scsi_host);
- spin_lock_irqsave(&h->lock, flags);
- }
-
- /* set scsi_host to NULL so our detect routine will
- find us on register */
- sa->scsi_host = NULL;
- spin_unlock_irqrestore(&h->lock, flags);
- scsi_cmd_stack_free(h);
- kfree(sa);
-}
-
-static int cciss_engage_scsi(ctlr_info_t *h)
-{
- struct cciss_scsi_adapter_data_t *sa;
- struct cciss_scsi_cmd_stack_t *stk;
- unsigned long flags;
-
- spin_lock_irqsave(&h->lock, flags);
- sa = h->scsi_ctlr;
- stk = &sa->cmd_stack;
-
- if (sa->registered) {
- dev_info(&h->pdev->dev, "SCSI subsystem already engaged.\n");
- spin_unlock_irqrestore(&h->lock, flags);
- return -ENXIO;
- }
- sa->registered = 1;
- spin_unlock_irqrestore(&h->lock, flags);
- cciss_update_non_disk_devices(h, -1);
- cciss_scsi_detect(h);
- return 0;
-}
-
-static void
-cciss_seq_tape_report(struct seq_file *seq, ctlr_info_t *h)
-{
- unsigned long flags;
-
- CPQ_TAPE_LOCK(h, flags);
- seq_printf(seq,
- "Sequential access devices: %d\n\n",
- ccissscsi[h->ctlr].ndevices);
- CPQ_TAPE_UNLOCK(h, flags);
-}
-
-static int wait_for_device_to_become_ready(ctlr_info_t *h,
- unsigned char lunaddr[])
-{
- int rc;
- int count = 0;
- int waittime = HZ;
- CommandList_struct *c;
-
- c = cmd_alloc(h);
- if (!c) {
- dev_warn(&h->pdev->dev, "out of memory in "
- "wait_for_device_to_become_ready.\n");
- return IO_ERROR;
- }
-
- /* Send test unit ready until device ready, or give up. */
- while (count < 20) {
-
- /* Wait for a bit. do this first, because if we send
- * the TUR right away, the reset will just abort it.
- */
- schedule_timeout_uninterruptible(waittime);
- count++;
-
- /* Increase wait time with each try, up to a point. */
- if (waittime < (HZ * 30))
- waittime = waittime * 2;
-
- /* Send the Test Unit Ready */
- rc = fill_cmd(h, c, TEST_UNIT_READY, NULL, 0, 0,
- lunaddr, TYPE_CMD);
- if (rc == 0)
- rc = sendcmd_withirq_core(h, c, 0);
-
- (void) process_sendcmd_error(h, c);
-
- if (rc != 0)
- goto retry_tur;
-
- if (c->err_info->CommandStatus == CMD_SUCCESS)
- break;
-
- if (c->err_info->CommandStatus == CMD_TARGET_STATUS &&
- c->err_info->ScsiStatus == SAM_STAT_CHECK_CONDITION) {
- if (c->err_info->SenseInfo[2] == NO_SENSE)
- break;
- if (c->err_info->SenseInfo[2] == UNIT_ATTENTION) {
- unsigned char asc;
- asc = c->err_info->SenseInfo[12];
- check_for_unit_attention(h, c);
- if (asc == POWER_OR_RESET)
- break;
- }
- }
-retry_tur:
- dev_warn(&h->pdev->dev, "Waiting %d secs "
- "for device to become ready.\n",
- waittime / HZ);
- rc = 1; /* device not ready. */
- }
-
- if (rc)
- dev_warn(&h->pdev->dev, "giving up on device.\n");
- else
- dev_warn(&h->pdev->dev, "device is ready.\n");
-
- cmd_free(h, c);
- return rc;
-}
-
-/* Need at least one of these error handlers to keep ../scsi/hosts.c from
- * complaining. Doing a host- or bus-reset can't do anything good here.
- * Despite what it might say in scsi_error.c, there may well be commands
- * on the controller, as the cciss driver registers twice, once as a block
- * device for the logical drives, and once as a scsi device, for any tape
- * drives. So we know there are no commands out on the tape drives, but we
- * don't know there are no commands on the controller, and it is likely
- * that there probably are, as the cciss block device is most commonly used
- * as a boot device (embedded controller on HP/Compaq systems.)
-*/
-
-static int cciss_eh_device_reset_handler(struct scsi_cmnd *scsicmd)
-{
- int rc;
- CommandList_struct *cmd_in_trouble;
- unsigned char lunaddr[8];
- ctlr_info_t *h;
-
- /* find the controller to which the command to be aborted was sent */
- h = (ctlr_info_t *) scsicmd->device->host->hostdata[0];
- if (h == NULL) /* paranoia */
- return FAILED;
- dev_warn(&h->pdev->dev, "resetting tape drive or medium changer.\n");
- /* find the command that's giving us trouble */
- cmd_in_trouble = (CommandList_struct *) scsicmd->host_scribble;
- if (cmd_in_trouble == NULL) /* paranoia */
- return FAILED;
- memcpy(lunaddr, &cmd_in_trouble->Header.LUN.LunAddrBytes[0], 8);
- /* send a reset to the SCSI LUN which the command was sent to */
- rc = sendcmd_withirq(h, CCISS_RESET_MSG, NULL, 0, 0, lunaddr,
- TYPE_MSG);
- if (rc == 0 && wait_for_device_to_become_ready(h, lunaddr) == 0)
- return SUCCESS;
- dev_warn(&h->pdev->dev, "resetting device failed.\n");
- return FAILED;
-}
-
-static int cciss_eh_abort_handler(struct scsi_cmnd *scsicmd)
-{
- int rc;
- CommandList_struct *cmd_to_abort;
- unsigned char lunaddr[8];
- ctlr_info_t *h;
-
- /* find the controller to which the command to be aborted was sent */
- h = (ctlr_info_t *) scsicmd->device->host->hostdata[0];
- if (h == NULL) /* paranoia */
- return FAILED;
- dev_warn(&h->pdev->dev, "aborting tardy SCSI cmd\n");
-
- /* find the command to be aborted */
- cmd_to_abort = (CommandList_struct *) scsicmd->host_scribble;
- if (cmd_to_abort == NULL) /* paranoia */
- return FAILED;
- memcpy(lunaddr, &cmd_to_abort->Header.LUN.LunAddrBytes[0], 8);
- rc = sendcmd_withirq(h, CCISS_ABORT_MSG, &cmd_to_abort->Header.Tag,
- 0, 0, lunaddr, TYPE_MSG);
- if (rc == 0)
- return SUCCESS;
- return FAILED;
-
-}
-
-#else /* no CONFIG_CISS_SCSI_TAPE */
-
-/* If no tape support, then these become defined out of existence */
-
-#define cciss_scsi_setup(cntl_num)
-#define cciss_engage_scsi(h)
-
-#endif /* CONFIG_CISS_SCSI_TAPE */
diff --git a/drivers/block/cciss_scsi.h b/drivers/block/cciss_scsi.h
deleted file mode 100644
index e71d986..0000000
--- a/drivers/block/cciss_scsi.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Disk Array driver for HP Smart Array controllers, SCSI Tape module.
- * (C) Copyright 2001, 2007 Hewlett-Packard Development Company, L.P.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 300, Boston, MA
- * 02111-1307, USA.
- *
- * Questions/Comments/Bugfixes to iss_storagedev@hp.com
- *
- */
-#ifdef CONFIG_CISS_SCSI_TAPE
-#ifndef _CCISS_SCSI_H_
-#define _CCISS_SCSI_H_
-
-#include <scsi/scsicam.h> /* possibly irrelevant, since we don't show disks */
-
- /* the scsi id of the adapter... */
-#define SELF_SCSI_ID 15
- /* 15 is somewhat arbitrary, since the scsi-2 bus
- that's presented by the driver to the OS is
- fabricated. The "real" scsi-3 bus the
- hardware presents is fabricated too.
- The actual, honest-to-goodness physical
- bus that the devices are attached to is not
- addressible natively, and may in fact turn
- out to be not scsi at all. */
-
-
-/*
-
-If the upper scsi layer tries to track how many commands we have
-outstanding, it will be operating under the misapprehension that it is
-the only one sending us requests. We also have the block interface,
-which is where most requests must surely come from, so the upper layer's
-notion of how many requests we have outstanding will be wrong most or
-all of the time.
-
-Note, the normal SCSI mid-layer error handling doesn't work well
-for this driver because 1) it takes the io_request_lock before
-calling error handlers and uses a local variable to store flags,
-so the io_request_lock cannot be released and interrupts enabled
-inside the error handlers, and, the error handlers cannot poll
-for command completion because they might get commands from the
-block half of the driver completing, and not know what to do
-with them. That's what we get for making a hybrid scsi/block
-driver, I suppose.
-
-*/
-
-struct cciss_scsi_dev_t {
- int devtype;
- int bus, target, lun; /* as presented to the OS */
- unsigned char scsi3addr[8]; /* as presented to the HW */
- unsigned char device_id[16]; /* from inquiry pg. 0x83 */
- unsigned char vendor[8]; /* bytes 8-15 of inquiry data */
- unsigned char model[16]; /* bytes 16-31 of inquiry data */
- unsigned char revision[4]; /* bytes 32-35 of inquiry data */
-};
-
-struct cciss_scsi_hba_t {
- char *name;
- int ndevices;
-#define CCISS_MAX_SCSI_DEVS_PER_HBA 16
- struct cciss_scsi_dev_t dev[CCISS_MAX_SCSI_DEVS_PER_HBA];
-};
-
-#endif /* _CCISS_SCSI_H_ */
-#endif /* CONFIG_CISS_SCSI_TAPE */
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index dea7d85..5bdf923 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -626,7 +626,6 @@
struct nbd_device *nbd = args->nbd;
struct nbd_config *config = nbd->config;
struct nbd_cmd *cmd;
- int ret = 0;
while (1) {
cmd = nbd_read_stat(nbd, args->index);
@@ -636,7 +635,6 @@
mutex_lock(&nsock->tx_lock);
nbd_mark_nsock_dead(nbd, nsock, 1);
mutex_unlock(&nsock->tx_lock);
- ret = PTR_ERR(cmd);
break;
}
@@ -910,7 +908,8 @@
continue;
}
sk_set_memalloc(sock->sk);
- sock->sk->sk_sndtimeo = nbd->tag_set.timeout;
+ if (nbd->tag_set.timeout)
+ sock->sk->sk_sndtimeo = nbd->tag_set.timeout;
atomic_inc(&config->recv_threads);
refcount_inc(&nbd->config_refs);
old = nsock->sock;
@@ -924,6 +923,8 @@
mutex_unlock(&nsock->tx_lock);
sockfd_put(old);
+ clear_bit(NBD_DISCONNECTED, &config->runtime_flags);
+
/* We take the tx_mutex in an error path in the recv_work, so we
* need to queue_work outside of the tx_mutex.
*/
@@ -980,11 +981,15 @@
int i, ret;
for (i = 0; i < config->num_connections; i++) {
+ struct nbd_sock *nsock = config->socks[i];
+
iov_iter_kvec(&from, WRITE | ITER_KVEC, &iov, 1, sizeof(request));
+ mutex_lock(&nsock->tx_lock);
ret = sock_xmit(nbd, i, 1, &from, 0, NULL);
if (ret <= 0)
dev_err(disk_to_dev(nbd->disk),
"Send disconnect failed %d\n", ret);
+ mutex_unlock(&nsock->tx_lock);
}
}
@@ -993,9 +998,8 @@
struct nbd_config *config = nbd->config;
dev_info(disk_to_dev(nbd->disk), "NBD_DISCONNECT\n");
- if (!test_and_set_bit(NBD_DISCONNECT_REQUESTED,
- &config->runtime_flags))
- send_disconnects(nbd);
+ set_bit(NBD_DISCONNECT_REQUESTED, &config->runtime_flags);
+ send_disconnects(nbd);
return 0;
}
@@ -1076,7 +1080,9 @@
return -ENOMEM;
}
sk_set_memalloc(config->socks[i]->sock->sk);
- config->socks[i]->sock->sk->sk_sndtimeo = nbd->tag_set.timeout;
+ if (nbd->tag_set.timeout)
+ config->socks[i]->sock->sk->sk_sndtimeo =
+ nbd->tag_set.timeout;
atomic_inc(&config->recv_threads);
refcount_inc(&nbd->config_refs);
INIT_WORK(&args->work, recv_work);
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 4e02aa5..1498b89 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -541,12 +541,9 @@
int i;
BUG_ON(!virtio_has_feature(vblk->vdev, VIRTIO_BLK_F_CONFIG_WCE));
- for (i = ARRAY_SIZE(virtblk_cache_types); --i >= 0; )
- if (sysfs_streq(buf, virtblk_cache_types[i]))
- break;
-
+ i = sysfs_match_string(virtblk_cache_types, buf);
if (i < 0)
- return -EINVAL;
+ return i;
virtio_cwrite8(vdev, offsetof(struct virtio_blk_config, wce), i);
virtblk_update_cache_mode(vdev);
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index c852ed3..98e34e4 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -111,7 +111,7 @@
};
struct blkif_req {
- int error;
+ blk_status_t error;
};
static inline struct blkif_req *blkif_req(struct request *rq)
@@ -708,6 +708,7 @@
* existing persistent grants, or if we have to get new grants,
* as there are not sufficiently many free.
*/
+ bool new_persistent_gnts = false;
struct scatterlist *sg;
int num_sg, max_grefs, num_grant;
@@ -719,19 +720,21 @@
*/
max_grefs += INDIRECT_GREFS(max_grefs);
- /*
- * We have to reserve 'max_grefs' grants because persistent
- * grants are shared by all rings.
- */
- if (max_grefs > 0)
- if (gnttab_alloc_grant_references(max_grefs, &setup.gref_head) < 0) {
+ /* Check if we have enough persistent grants to allocate a requests */
+ if (rinfo->persistent_gnts_c < max_grefs) {
+ new_persistent_gnts = true;
+
+ if (gnttab_alloc_grant_references(
+ max_grefs - rinfo->persistent_gnts_c,
+ &setup.gref_head) < 0) {
gnttab_request_free_callback(
&rinfo->callback,
blkif_restart_queue_callback,
rinfo,
- max_grefs);
+ max_grefs - rinfo->persistent_gnts_c);
return 1;
}
+ }
/* Fill out a communications ring structure. */
id = blkif_ring_get_request(rinfo, req, &ring_req);
@@ -832,7 +835,7 @@
if (unlikely(require_extra_req))
rinfo->shadow[extra_id].req = *extra_ring_req;
- if (max_grefs > 0)
+ if (new_persistent_gnts)
gnttab_free_grant_references(setup.gref_head);
return 0;
@@ -906,8 +909,8 @@
return BLK_STS_IOERR;
out_busy:
- spin_unlock_irqrestore(&rinfo->ring_lock, flags);
blk_mq_stop_hw_queue(hctx);
+ spin_unlock_irqrestore(&rinfo->ring_lock, flags);
return BLK_STS_RESOURCE;
}
@@ -1616,7 +1619,7 @@
if (unlikely(bret->status == BLKIF_RSP_EOPNOTSUPP)) {
printk(KERN_WARNING "blkfront: %s: %s op failed\n",
info->gd->disk_name, op_name(bret->operation));
- blkif_req(req)->error = -EOPNOTSUPP;
+ blkif_req(req)->error = BLK_STS_NOTSUPP;
}
if (unlikely(bret->status == BLKIF_RSP_ERROR &&
rinfo->shadow[id].req.u.rw.nr_segments == 0)) {
diff --git a/drivers/bus/uniphier-system-bus.c b/drivers/bus/uniphier-system-bus.c
index 1e6e0269..f76be6b 100644
--- a/drivers/bus/uniphier-system-bus.c
+++ b/drivers/bus/uniphier-system-bus.c
@@ -256,10 +256,23 @@
uniphier_system_bus_set_reg(priv);
+ platform_set_drvdata(pdev, priv);
+
/* Now, the bus is configured. Populate platform_devices below it */
return of_platform_default_populate(dev->of_node, NULL, dev);
}
+static int __maybe_unused uniphier_system_bus_resume(struct device *dev)
+{
+ uniphier_system_bus_set_reg(dev_get_drvdata(dev));
+
+ return 0;
+}
+
+static const struct dev_pm_ops uniphier_system_bus_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(NULL, uniphier_system_bus_resume)
+};
+
static const struct of_device_id uniphier_system_bus_match[] = {
{ .compatible = "socionext,uniphier-system-bus" },
{ /* sentinel */ }
@@ -271,6 +284,7 @@
.driver = {
.name = "uniphier-system-bus",
.of_match_table = uniphier_system_bus_match,
+ .pm = &uniphier_system_bus_pm_ops,
},
};
module_platform_driver(uniphier_system_bus_driver);
diff --git a/drivers/char/random.c b/drivers/char/random.c
index 01a260f..afa3ce7 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -288,7 +288,6 @@
#define SEC_XFER_SIZE 512
#define EXTRACT_SIZE 10
-#define DEBUG_RANDOM_BOOT 0
#define LONGS(x) (((x) + sizeof(unsigned long) - 1)/sizeof(unsigned long))
@@ -437,6 +436,7 @@
static void _crng_backtrack_protect(struct crng_state *crng,
__u8 tmp[CHACHA20_BLOCK_SIZE], int used);
static void process_random_ready_list(void);
+static void _get_random_bytes(void *buf, int nbytes);
/**********************************************************************
*
@@ -777,7 +777,7 @@
_extract_entropy(&input_pool, &crng->state[4],
sizeof(__u32) * 12, 0);
else
- get_random_bytes(&crng->state[4], sizeof(__u32) * 12);
+ _get_random_bytes(&crng->state[4], sizeof(__u32) * 12);
for (i = 4; i < 16; i++) {
if (!arch_get_random_seed_long(&rv) &&
!arch_get_random_long(&rv))
@@ -851,11 +851,6 @@
}
}
-static inline void crng_wait_ready(void)
-{
- wait_event_interruptible(crng_init_wait, crng_ready());
-}
-
static void _extract_crng(struct crng_state *crng,
__u8 out[CHACHA20_BLOCK_SIZE])
{
@@ -987,6 +982,11 @@
unsigned long time = random_get_entropy() ^ jiffies;
unsigned long flags;
+ if (!crng_ready()) {
+ crng_fast_load(buf, size);
+ return;
+ }
+
trace_add_device_randomness(size, _RET_IP_);
spin_lock_irqsave(&input_pool.lock, flags);
_mix_pool_bytes(&input_pool, buf, size);
@@ -1472,22 +1472,44 @@
return ret;
}
+#define warn_unseeded_randomness(previous) \
+ _warn_unseeded_randomness(__func__, (void *) _RET_IP_, (previous))
+
+static void _warn_unseeded_randomness(const char *func_name, void *caller,
+ void **previous)
+{
+#ifdef CONFIG_WARN_ALL_UNSEEDED_RANDOM
+ const bool print_once = false;
+#else
+ static bool print_once __read_mostly;
+#endif
+
+ if (print_once ||
+ crng_ready() ||
+ (previous && (caller == READ_ONCE(*previous))))
+ return;
+ WRITE_ONCE(*previous, caller);
+#ifndef CONFIG_WARN_ALL_UNSEEDED_RANDOM
+ print_once = true;
+#endif
+ pr_notice("random: %s called from %pF with crng_init=%d\n",
+ func_name, caller, crng_init);
+}
+
/*
* This function is the exported kernel interface. It returns some
* number of good random numbers, suitable for key generation, seeding
* TCP sequence numbers, etc. It does not rely on the hardware random
* number generator. For random bytes direct from the hardware RNG
- * (when available), use get_random_bytes_arch().
+ * (when available), use get_random_bytes_arch(). In order to ensure
+ * that the randomness provided by this function is okay, the function
+ * wait_for_random_bytes() should be called and return 0 at least once
+ * at any point prior.
*/
-void get_random_bytes(void *buf, int nbytes)
+static void _get_random_bytes(void *buf, int nbytes)
{
__u8 tmp[CHACHA20_BLOCK_SIZE];
-#if DEBUG_RANDOM_BOOT > 0
- if (!crng_ready())
- printk(KERN_NOTICE "random: %pF get_random_bytes called "
- "with crng_init = %d\n", (void *) _RET_IP_, crng_init);
-#endif
trace_get_random_bytes(nbytes, _RET_IP_);
while (nbytes >= CHACHA20_BLOCK_SIZE) {
@@ -1504,9 +1526,35 @@
crng_backtrack_protect(tmp, CHACHA20_BLOCK_SIZE);
memzero_explicit(tmp, sizeof(tmp));
}
+
+void get_random_bytes(void *buf, int nbytes)
+{
+ static void *previous;
+
+ warn_unseeded_randomness(&previous);
+ _get_random_bytes(buf, nbytes);
+}
EXPORT_SYMBOL(get_random_bytes);
/*
+ * Wait for the urandom pool to be seeded and thus guaranteed to supply
+ * cryptographically secure random numbers. This applies to: the /dev/urandom
+ * device, the get_random_bytes function, and the get_random_{u32,u64,int,long}
+ * family of functions. Using any of these functions without first calling
+ * this function forfeits the guarantee of security.
+ *
+ * Returns: 0 if the urandom pool has been seeded.
+ * -ERESTARTSYS if the function was interrupted by a signal.
+ */
+int wait_for_random_bytes(void)
+{
+ if (likely(crng_ready()))
+ return 0;
+ return wait_event_interruptible(crng_init_wait, crng_ready());
+}
+EXPORT_SYMBOL(wait_for_random_bytes);
+
+/*
* Add a callback function that will be invoked when the nonblocking
* pool is initialised.
*
@@ -1860,6 +1908,8 @@
SYSCALL_DEFINE3(getrandom, char __user *, buf, size_t, count,
unsigned int, flags)
{
+ int ret;
+
if (flags & ~(GRND_NONBLOCK|GRND_RANDOM))
return -EINVAL;
@@ -1872,9 +1922,9 @@
if (!crng_ready()) {
if (flags & GRND_NONBLOCK)
return -EAGAIN;
- crng_wait_ready();
- if (signal_pending(current))
- return -ERESTARTSYS;
+ ret = wait_for_random_bytes();
+ if (unlikely(ret))
+ return ret;
}
return urandom_read(NULL, buf, count, NULL);
}
@@ -2035,15 +2085,19 @@
/*
* Get a random word for internal kernel use only. The quality of the random
* number is either as good as RDRAND or as good as /dev/urandom, with the
- * goal of being quite fast and not depleting entropy.
+ * goal of being quite fast and not depleting entropy. In order to ensure
+ * that the randomness provided by this function is okay, the function
+ * wait_for_random_bytes() should be called and return 0 at least once
+ * at any point prior.
*/
static DEFINE_PER_CPU(struct batched_entropy, batched_entropy_u64);
u64 get_random_u64(void)
{
u64 ret;
- bool use_lock = READ_ONCE(crng_init) < 2;
+ bool use_lock;
unsigned long flags = 0;
struct batched_entropy *batch;
+ static void *previous;
#if BITS_PER_LONG == 64
if (arch_get_random_long((unsigned long *)&ret))
@@ -2054,6 +2108,9 @@
return ret;
#endif
+ warn_unseeded_randomness(&previous);
+
+ use_lock = READ_ONCE(crng_init) < 2;
batch = &get_cpu_var(batched_entropy_u64);
if (use_lock)
read_lock_irqsave(&batched_entropy_reset_lock, flags);
@@ -2073,13 +2130,17 @@
u32 get_random_u32(void)
{
u32 ret;
- bool use_lock = READ_ONCE(crng_init) < 2;
+ bool use_lock;
unsigned long flags = 0;
struct batched_entropy *batch;
+ static void *previous;
if (arch_get_random_int(&ret))
return ret;
+ warn_unseeded_randomness(&previous);
+
+ use_lock = READ_ONCE(crng_init) < 2;
batch = &get_cpu_var(batched_entropy_u32);
if (use_lock)
read_lock_irqsave(&batched_entropy_reset_lock, flags);
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index d406b08..68ca2d9 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -221,6 +221,7 @@
source "drivers/clk/bcm/Kconfig"
source "drivers/clk/hisilicon/Kconfig"
+source "drivers/clk/imgtec/Kconfig"
source "drivers/clk/keystone/Kconfig"
source "drivers/clk/mediatek/Kconfig"
source "drivers/clk/meson/Kconfig"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 4f6a812..cd376b3 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -60,6 +60,7 @@
obj-$(CONFIG_ARCH_BERLIN) += berlin/
obj-$(CONFIG_H8300) += h8300/
obj-$(CONFIG_ARCH_HISI) += hisilicon/
+obj-y += imgtec/
obj-$(CONFIG_ARCH_MXC) += imx/
obj-$(CONFIG_MACH_INGENIC) += ingenic/
obj-$(CONFIG_ARCH_KEYSTONE) += keystone/
diff --git a/drivers/clk/clk-gemini.c b/drivers/clk/clk-gemini.c
index c391a49..b4cf2f6 100644
--- a/drivers/clk/clk-gemini.c
+++ b/drivers/clk/clk-gemini.c
@@ -237,6 +237,18 @@
BIT(GEMINI_RESET_CPU1) | BIT(id));
}
+static int gemini_reset_assert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ return 0;
+}
+
+static int gemini_reset_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ return 0;
+}
+
static int gemini_reset_status(struct reset_controller_dev *rcdev,
unsigned long id)
{
@@ -253,6 +265,8 @@
static const struct reset_control_ops gemini_reset_ops = {
.reset = gemini_reset,
+ .assert = gemini_reset_assert,
+ .deassert = gemini_reset_deassert,
.status = gemini_reset_status,
};
diff --git a/drivers/clk/imgtec/Kconfig b/drivers/clk/imgtec/Kconfig
new file mode 100644
index 0000000..f6dcb74
--- /dev/null
+++ b/drivers/clk/imgtec/Kconfig
@@ -0,0 +1,9 @@
+config COMMON_CLK_BOSTON
+ bool "Clock driver for MIPS Boston boards"
+ depends on MIPS || COMPILE_TEST
+ select MFD_SYSCON
+ ---help---
+ Enable this to support the system & CPU clocks on the MIPS Boston
+ development board from Imagination Technologies. These are simple
+ fixed rate clocks whose rate is determined by reading a platform
+ provided register.
diff --git a/drivers/clk/imgtec/Makefile b/drivers/clk/imgtec/Makefile
new file mode 100644
index 0000000..ac779b8
--- /dev/null
+++ b/drivers/clk/imgtec/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_COMMON_CLK_BOSTON) += clk-boston.o
diff --git a/drivers/clk/imgtec/clk-boston.c b/drivers/clk/imgtec/clk-boston.c
new file mode 100644
index 0000000..f18f103
--- /dev/null
+++ b/drivers/clk/imgtec/clk-boston.c
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2016-2017 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#define pr_fmt(fmt) "clk-boston: " fmt
+
+#include <linux/clk-provider.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/mfd/syscon.h>
+
+#include <dt-bindings/clock/boston-clock.h>
+
+#define BOSTON_PLAT_MMCMDIV 0x30
+# define BOSTON_PLAT_MMCMDIV_CLK0DIV (0xff << 0)
+# define BOSTON_PLAT_MMCMDIV_INPUT (0xff << 8)
+# define BOSTON_PLAT_MMCMDIV_MUL (0xff << 16)
+# define BOSTON_PLAT_MMCMDIV_CLK1DIV (0xff << 24)
+
+#define BOSTON_CLK_COUNT 3
+
+static u32 ext_field(u32 val, u32 mask)
+{
+ return (val & mask) >> (ffs(mask) - 1);
+}
+
+static void __init clk_boston_setup(struct device_node *np)
+{
+ unsigned long in_freq, cpu_freq, sys_freq;
+ uint mmcmdiv, mul, cpu_div, sys_div;
+ struct clk_hw_onecell_data *onecell;
+ struct regmap *regmap;
+ struct clk_hw *hw;
+ int err;
+
+ regmap = syscon_node_to_regmap(np->parent);
+ if (IS_ERR(regmap)) {
+ pr_err("failed to find regmap\n");
+ return;
+ }
+
+ err = regmap_read(regmap, BOSTON_PLAT_MMCMDIV, &mmcmdiv);
+ if (err) {
+ pr_err("failed to read mmcm_div register: %d\n", err);
+ return;
+ }
+
+ in_freq = ext_field(mmcmdiv, BOSTON_PLAT_MMCMDIV_INPUT) * 1000000;
+ mul = ext_field(mmcmdiv, BOSTON_PLAT_MMCMDIV_MUL);
+
+ sys_div = ext_field(mmcmdiv, BOSTON_PLAT_MMCMDIV_CLK0DIV);
+ sys_freq = mult_frac(in_freq, mul, sys_div);
+
+ cpu_div = ext_field(mmcmdiv, BOSTON_PLAT_MMCMDIV_CLK1DIV);
+ cpu_freq = mult_frac(in_freq, mul, cpu_div);
+
+ onecell = kzalloc(sizeof(*onecell) +
+ (BOSTON_CLK_COUNT * sizeof(struct clk_hw *)),
+ GFP_KERNEL);
+ if (!onecell)
+ return;
+
+ onecell->num = BOSTON_CLK_COUNT;
+
+ hw = clk_hw_register_fixed_rate(NULL, "input", NULL, 0, in_freq);
+ if (IS_ERR(hw)) {
+ pr_err("failed to register input clock: %ld\n", PTR_ERR(hw));
+ return;
+ }
+ onecell->hws[BOSTON_CLK_INPUT] = hw;
+
+ hw = clk_hw_register_fixed_rate(NULL, "sys", "input", 0, sys_freq);
+ if (IS_ERR(hw)) {
+ pr_err("failed to register sys clock: %ld\n", PTR_ERR(hw));
+ return;
+ }
+ onecell->hws[BOSTON_CLK_SYS] = hw;
+
+ hw = clk_hw_register_fixed_rate(NULL, "cpu", "input", 0, cpu_freq);
+ if (IS_ERR(hw)) {
+ pr_err("failed to register cpu clock: %ld\n", PTR_ERR(hw));
+ return;
+ }
+ onecell->hws[BOSTON_CLK_CPU] = hw;
+
+ err = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, onecell);
+ if (err)
+ pr_err("failed to add DT provider: %d\n", err);
+}
+
+/*
+ * Use CLK_OF_DECLARE so that this driver is probed early enough to provide the
+ * CPU frequency for use with the GIC or cop0 counters/timers.
+ */
+CLK_OF_DECLARE(clk_boston, "img,boston-clock", clk_boston_setup);
diff --git a/drivers/clk/keystone/sci-clk.c b/drivers/clk/keystone/sci-clk.c
index 43b0f2f..9cdf9d5 100644
--- a/drivers/clk/keystone/sci-clk.c
+++ b/drivers/clk/keystone/sci-clk.c
@@ -22,6 +22,7 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/soc/ti/ti_sci_protocol.h>
+#include <linux/bsearch.h>
#define SCI_CLK_SSC_ENABLE BIT(0)
#define SCI_CLK_ALLOW_FREQ_CHANGE BIT(1)
@@ -44,6 +45,7 @@
* @dev: Device pointer for the clock provider
* @clk_data: Clock data
* @clocks: Clocks array for this device
+ * @num_clocks: Total number of clocks for this provider
*/
struct sci_clk_provider {
const struct ti_sci_handle *sci;
@@ -51,6 +53,7 @@
struct device *dev;
const struct sci_clk_data *clk_data;
struct clk_hw **clocks;
+ int num_clocks;
};
/**
@@ -58,7 +61,6 @@
* @hw: Hardware clock cookie for common clock framework
* @dev_id: Device index
* @clk_id: Clock index
- * @node: Clocks list link
* @provider: Master clock provider
* @flags: Flags for the clock
*/
@@ -66,7 +68,6 @@
struct clk_hw hw;
u16 dev_id;
u8 clk_id;
- struct list_head node;
struct sci_clk_provider *provider;
u8 flags;
};
@@ -367,6 +368,19 @@
return &sci_clk->hw;
}
+static int _cmp_sci_clk(const void *a, const void *b)
+{
+ const struct sci_clk *ca = a;
+ const struct sci_clk *cb = *(struct sci_clk **)b;
+
+ if (ca->dev_id == cb->dev_id && ca->clk_id == cb->clk_id)
+ return 0;
+ if (ca->dev_id > cb->dev_id ||
+ (ca->dev_id == cb->dev_id && ca->clk_id > cb->clk_id))
+ return 1;
+ return -1;
+}
+
/**
* sci_clk_get - Xlate function for getting clock handles
* @clkspec: device tree clock specifier
@@ -380,29 +394,22 @@
static struct clk_hw *sci_clk_get(struct of_phandle_args *clkspec, void *data)
{
struct sci_clk_provider *provider = data;
- u16 dev_id;
- u8 clk_id;
- const struct sci_clk_data *clks = provider->clk_data;
- struct clk_hw **clocks = provider->clocks;
+ struct sci_clk **clk;
+ struct sci_clk key;
if (clkspec->args_count != 2)
return ERR_PTR(-EINVAL);
- dev_id = clkspec->args[0];
- clk_id = clkspec->args[1];
+ key.dev_id = clkspec->args[0];
+ key.clk_id = clkspec->args[1];
- while (clks->num_clks) {
- if (clks->dev == dev_id) {
- if (clk_id >= clks->num_clks)
- return ERR_PTR(-EINVAL);
+ clk = bsearch(&key, provider->clocks, provider->num_clocks,
+ sizeof(clk), _cmp_sci_clk);
- return clocks[clk_id];
- }
+ if (!clk)
+ return ERR_PTR(-ENODEV);
- clks++;
- }
-
- return ERR_PTR(-ENODEV);
+ return &(*clk)->hw;
}
static int ti_sci_init_clocks(struct sci_clk_provider *p)
@@ -410,18 +417,29 @@
const struct sci_clk_data *data = p->clk_data;
struct clk_hw *hw;
int i;
+ int num_clks = 0;
while (data->num_clks) {
- p->clocks = devm_kcalloc(p->dev, data->num_clks,
- sizeof(struct sci_clk),
- GFP_KERNEL);
- if (!p->clocks)
- return -ENOMEM;
+ num_clks += data->num_clks;
+ data++;
+ }
+ p->num_clocks = num_clks;
+
+ p->clocks = devm_kcalloc(p->dev, num_clks, sizeof(struct sci_clk),
+ GFP_KERNEL);
+ if (!p->clocks)
+ return -ENOMEM;
+
+ num_clks = 0;
+
+ data = p->clk_data;
+
+ while (data->num_clks) {
for (i = 0; i < data->num_clks; i++) {
hw = _sci_clk_build(p, data->dev, i);
if (!IS_ERR(hw)) {
- p->clocks[i] = hw;
+ p->clocks[num_clks++] = hw;
continue;
}
diff --git a/drivers/clk/meson/clk-mpll.c b/drivers/clk/meson/clk-mpll.c
index 39eab69..44a5a53 100644
--- a/drivers/clk/meson/clk-mpll.c
+++ b/drivers/clk/meson/clk-mpll.c
@@ -161,6 +161,13 @@
reg = PARM_SET(p->width, p->shift, reg, 1);
writel(reg, mpll->base + p->reg_off);
+ p = &mpll->ssen;
+ if (p->width != 0) {
+ reg = readl(mpll->base + p->reg_off);
+ reg = PARM_SET(p->width, p->shift, reg, 1);
+ writel(reg, mpll->base + p->reg_off);
+ }
+
p = &mpll->n2;
reg = readl(mpll->base + p->reg_off);
reg = PARM_SET(p->width, p->shift, reg, n2);
diff --git a/drivers/clk/meson/clkc.h b/drivers/clk/meson/clkc.h
index d6feafe..1629da9 100644
--- a/drivers/clk/meson/clkc.h
+++ b/drivers/clk/meson/clkc.h
@@ -118,6 +118,7 @@
struct parm sdm_en;
struct parm n2;
struct parm en;
+ struct parm ssen;
spinlock_t *lock;
};
diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
index a897ea4..a7ea5f3 100644
--- a/drivers/clk/meson/gxbb.c
+++ b/drivers/clk/meson/gxbb.c
@@ -528,6 +528,11 @@
.shift = 14,
.width = 1,
},
+ .ssen = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 25,
+ .width = 1,
+ },
.lock = &clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpll0",
diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index bb3f1de..6ec512a 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -267,6 +267,11 @@
.shift = 14,
.width = 1,
},
+ .ssen = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 25,
+ .width = 1,
+ },
.lock = &clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpll0",
diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
index 0748a0b..9a6476a 100644
--- a/drivers/clk/samsung/clk-exynos5420.c
+++ b/drivers/clk/samsung/clk-exynos5420.c
@@ -1283,16 +1283,16 @@
static const struct samsung_pll_rate_table exynos5420_epll_24mhz_tbl[] = {
PLL_36XX_RATE(600000000U, 100, 2, 1, 0),
PLL_36XX_RATE(400000000U, 200, 3, 2, 0),
- PLL_36XX_RATE(393216000U, 197, 3, 2, 25690),
- PLL_36XX_RATE(361267200U, 301, 5, 2, 3671),
+ PLL_36XX_RATE(393216003U, 197, 3, 2, -25690),
+ PLL_36XX_RATE(361267218U, 301, 5, 2, 3671),
PLL_36XX_RATE(200000000U, 200, 3, 3, 0),
- PLL_36XX_RATE(196608000U, 197, 3, 3, -25690),
- PLL_36XX_RATE(180633600U, 301, 5, 3, 3671),
- PLL_36XX_RATE(131072000U, 131, 3, 3, 4719),
+ PLL_36XX_RATE(196608001U, 197, 3, 3, -25690),
+ PLL_36XX_RATE(180633609U, 301, 5, 3, 3671),
+ PLL_36XX_RATE(131072006U, 131, 3, 3, 4719),
PLL_36XX_RATE(100000000U, 200, 3, 4, 0),
- PLL_36XX_RATE(65536000U, 131, 3, 4, 4719),
- PLL_36XX_RATE(49152000U, 197, 3, 5, 25690),
- PLL_36XX_RATE(32768000U, 131, 3, 5, 4719),
+ PLL_36XX_RATE( 65536003U, 131, 3, 4, 4719),
+ PLL_36XX_RATE( 49152000U, 197, 3, 5, -25690),
+ PLL_36XX_RATE( 32768001U, 131, 3, 5, 4719),
};
static struct samsung_pll_clock exynos5x_plls[nr_plls] __initdata = {
diff --git a/drivers/clk/sunxi-ng/ccu-sun5i.c b/drivers/clk/sunxi-ng/ccu-sun5i.c
index 5372bf8..31d7ffd 100644
--- a/drivers/clk/sunxi-ng/ccu-sun5i.c
+++ b/drivers/clk/sunxi-ng/ccu-sun5i.c
@@ -184,7 +184,7 @@
.hw.init = CLK_HW_INIT_PARENTS("cpu",
cpu_parents,
&ccu_mux_ops,
- CLK_IS_CRITICAL),
+ CLK_SET_RATE_PARENT | CLK_IS_CRITICAL),
}
};
diff --git a/drivers/clk/x86/clk-pmc-atom.c b/drivers/clk/x86/clk-pmc-atom.c
index f99abc1..08ef699 100644
--- a/drivers/clk/x86/clk-pmc-atom.c
+++ b/drivers/clk/x86/clk-pmc-atom.c
@@ -186,6 +186,13 @@
pclk->reg = base + PMC_CLK_CTL_OFFSET + id * PMC_CLK_CTL_SIZE;
spin_lock_init(&pclk->lock);
+ /*
+ * If the clock was already enabled by the firmware mark it as critical
+ * to avoid it being gated by the clock framework if no driver owns it.
+ */
+ if (plt_clk_is_enabled(&pclk->hw))
+ init.flags |= CLK_IS_CRITICAL;
+
ret = devm_clk_hw_register(&pdev->dev, &pclk->hw);
if (ret) {
pclk = ERR_PTR(ret);
diff --git a/drivers/clocksource/timer-of.c b/drivers/clocksource/timer-of.c
index f6e7491..d509b50 100644
--- a/drivers/clocksource/timer-of.c
+++ b/drivers/clocksource/timer-of.c
@@ -41,8 +41,16 @@
struct timer_of *to = container_of(of_irq, struct timer_of, of_irq);
struct clock_event_device *clkevt = &to->clkevt;
- of_irq->irq = of_irq->name ? of_irq_get_byname(np, of_irq->name):
- irq_of_parse_and_map(np, of_irq->index);
+ if (of_irq->name) {
+ of_irq->irq = ret = of_irq_get_byname(np, of_irq->name);
+ if (ret < 0) {
+ pr_err("Failed to get interrupt %s for %s\n",
+ of_irq->name, np->full_name);
+ return ret;
+ }
+ } else {
+ of_irq->irq = irq_of_parse_and_map(np, of_irq->index);
+ }
if (!of_irq->irq) {
pr_err("Failed to map interrupt for %s\n", np->full_name);
return -EINVAL;
diff --git a/drivers/cpufreq/arm_big_little.c b/drivers/cpufreq/arm_big_little.c
index 4180422..ea6d625 100644
--- a/drivers/cpufreq/arm_big_little.c
+++ b/drivers/cpufreq/arm_big_little.c
@@ -540,7 +540,7 @@
&power_coefficient);
cdev[cur_cluster] = of_cpufreq_power_cooling_register(np,
- policy->related_cpus, power_coefficient, NULL);
+ policy, power_coefficient, NULL);
if (IS_ERR(cdev[cur_cluster])) {
dev_err(cpu_dev,
"running cpufreq without cooling device: %ld\n",
diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index c943787..fef3c21 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -326,7 +326,7 @@
&power_coefficient);
priv->cdev = of_cpufreq_power_cooling_register(np,
- policy->related_cpus, power_coefficient, NULL);
+ policy, power_coefficient, NULL);
if (IS_ERR(priv->cdev)) {
dev_err(priv->cpu_dev,
"running cpufreq without cooling device: %ld\n",
diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c
index d362739..e75880e 100644
--- a/drivers/cpufreq/cpufreq_stats.c
+++ b/drivers/cpufreq/cpufreq_stats.c
@@ -170,11 +170,10 @@
unsigned int i = 0, count = 0, ret = -ENOMEM;
struct cpufreq_stats *stats;
unsigned int alloc_size;
- struct cpufreq_frequency_table *pos, *table;
+ struct cpufreq_frequency_table *pos;
- /* We need cpufreq table for creating stats table */
- table = policy->freq_table;
- if (unlikely(!table))
+ count = cpufreq_table_count_valid_entries(policy);
+ if (!count)
return;
/* stats already initialized */
@@ -185,10 +184,6 @@
if (!stats)
return;
- /* Find total allocation size */
- cpufreq_for_each_valid_entry(pos, table)
- count++;
-
alloc_size = count * sizeof(int) + count * sizeof(u64);
alloc_size += count * count * sizeof(int);
@@ -205,7 +200,7 @@
stats->max_state = count;
/* Find valid-unique entries */
- cpufreq_for_each_valid_entry(pos, table)
+ cpufreq_for_each_valid_entry(pos, policy->freq_table)
if (freq_table_get_index(stats, pos->frequency) == -1)
stats->freq_table[i++] = pos->frequency;
diff --git a/drivers/cpufreq/dbx500-cpufreq.c b/drivers/cpufreq/dbx500-cpufreq.c
index 3575b82..4ee0431 100644
--- a/drivers/cpufreq/dbx500-cpufreq.c
+++ b/drivers/cpufreq/dbx500-cpufreq.c
@@ -43,7 +43,7 @@
static void dbx500_cpufreq_ready(struct cpufreq_policy *policy)
{
- cdev = cpufreq_cooling_register(policy->cpus);
+ cdev = cpufreq_cooling_register(policy);
if (IS_ERR(cdev))
pr_err("Failed to register cooling device %ld\n", PTR_ERR(cdev));
else
diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
index d6f3235..0566455 100644
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -225,6 +225,9 @@
* @vid: Stores VID limits for this CPU
* @pid: Stores PID parameters for this CPU
* @last_sample_time: Last Sample time
+ * @aperf_mperf_shift: Number of clock cycles after aperf, merf is incremented
+ * This shift is a multiplier to mperf delta to
+ * calculate CPU busy.
* @prev_aperf: Last APERF value read from APERF MSR
* @prev_mperf: Last MPERF value read from MPERF MSR
* @prev_tsc: Last timestamp counter (TSC) value
@@ -259,6 +262,7 @@
u64 last_update;
u64 last_sample_time;
+ u64 aperf_mperf_shift;
u64 prev_aperf;
u64 prev_mperf;
u64 prev_tsc;
@@ -321,6 +325,7 @@
int (*get_min)(void);
int (*get_turbo)(void);
int (*get_scaling)(void);
+ int (*get_aperf_mperf_shift)(void);
u64 (*get_val)(struct cpudata*, int pstate);
void (*get_vid)(struct cpudata *);
void (*update_util)(struct update_util_data *data, u64 time,
@@ -572,7 +577,7 @@
int turbo_pstate = cpu->pstate.turbo_pstate;
return turbo_pstate ?
- DIV_ROUND_UP(cpu->pstate.min_pstate * 100, turbo_pstate) : 0;
+ (cpu->pstate.min_pstate * 100 / turbo_pstate) : 0;
}
static s16 intel_pstate_get_epb(struct cpudata *cpu_data)
@@ -1486,6 +1491,11 @@
return val;
}
+static int knl_get_aperf_mperf_shift(void)
+{
+ return 10;
+}
+
static int knl_get_turbo_pstate(void)
{
u64 value;
@@ -1543,6 +1553,9 @@
cpu->pstate.max_freq = cpu->pstate.max_pstate * cpu->pstate.scaling;
cpu->pstate.turbo_freq = cpu->pstate.turbo_pstate * cpu->pstate.scaling;
+ if (pstate_funcs.get_aperf_mperf_shift)
+ cpu->aperf_mperf_shift = pstate_funcs.get_aperf_mperf_shift();
+
if (pstate_funcs.get_vid)
pstate_funcs.get_vid(cpu);
@@ -1616,7 +1629,8 @@
int32_t busy_frac, boost;
int target, avg_pstate;
- busy_frac = div_fp(sample->mperf, sample->tsc);
+ busy_frac = div_fp(sample->mperf << cpu->aperf_mperf_shift,
+ sample->tsc);
boost = cpu->iowait_boost;
cpu->iowait_boost >>= 1;
@@ -1675,7 +1689,8 @@
sample_ratio = div_fp(pid_params.sample_rate_ns, duration_ns);
perf_scaled = mul_fp(perf_scaled, sample_ratio);
} else {
- sample_ratio = div_fp(100 * cpu->sample.mperf, cpu->sample.tsc);
+ sample_ratio = div_fp(100 * (cpu->sample.mperf << cpu->aperf_mperf_shift),
+ cpu->sample.tsc);
if (sample_ratio < int_tofp(1))
perf_scaled = 0;
}
@@ -1807,6 +1822,7 @@
.get_max_physical = core_get_max_pstate_physical,
.get_min = core_get_min_pstate,
.get_turbo = knl_get_turbo_pstate,
+ .get_aperf_mperf_shift = knl_get_aperf_mperf_shift,
.get_scaling = core_get_scaling,
.get_val = core_get_val,
.update_util = intel_pstate_update_util_pid,
@@ -1906,13 +1922,6 @@
return 0;
}
-static unsigned int intel_pstate_get(unsigned int cpu_num)
-{
- struct cpudata *cpu = all_cpu_data[cpu_num];
-
- return cpu ? get_avg_frequency(cpu) : 0;
-}
-
static void intel_pstate_set_update_util_hook(unsigned int cpu_num)
{
struct cpudata *cpu = all_cpu_data[cpu_num];
@@ -2153,7 +2162,6 @@
.setpolicy = intel_pstate_set_policy,
.suspend = intel_pstate_hwp_save_state,
.resume = intel_pstate_resume,
- .get = intel_pstate_get,
.init = intel_pstate_cpu_init,
.exit = intel_pstate_cpu_exit,
.stop_cpu = intel_pstate_stop_cpu,
@@ -2403,6 +2411,7 @@
pstate_funcs.get_val = funcs->get_val;
pstate_funcs.get_vid = funcs->get_vid;
pstate_funcs.update_util = funcs->update_util;
+ pstate_funcs.get_aperf_mperf_shift = funcs->get_aperf_mperf_shift;
intel_pstate_use_acpi_profile();
}
diff --git a/drivers/cpufreq/mt8173-cpufreq.c b/drivers/cpufreq/mt8173-cpufreq.c
index fd1886f..f9f00fb 100644
--- a/drivers/cpufreq/mt8173-cpufreq.c
+++ b/drivers/cpufreq/mt8173-cpufreq.c
@@ -320,9 +320,7 @@
of_property_read_u32(np, DYNAMIC_POWER, &capacitance);
info->cdev = of_cpufreq_power_cooling_register(np,
- policy->related_cpus,
- capacitance,
- NULL);
+ policy, capacitance, NULL);
if (IS_ERR(info->cdev)) {
dev_err(info->cpu_dev,
diff --git a/drivers/cpufreq/qoriq-cpufreq.c b/drivers/cpufreq/qoriq-cpufreq.c
index e2ea433..4ada55b 100644
--- a/drivers/cpufreq/qoriq-cpufreq.c
+++ b/drivers/cpufreq/qoriq-cpufreq.c
@@ -278,8 +278,7 @@
struct device_node *np = of_get_cpu_node(policy->cpu, NULL);
if (of_find_property(np, "#cooling-cells", NULL)) {
- cpud->cdev = of_cpufreq_cooling_register(np,
- policy->related_cpus);
+ cpud->cdev = of_cpufreq_cooling_register(np, policy);
if (IS_ERR(cpud->cdev) && PTR_ERR(cpud->cdev) != -ENOSYS) {
pr_err("cpu%d is not running as cooling device: %ld\n",
diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index 193204d..4b75084 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -655,7 +655,7 @@
config CRYPTO_DEV_BCM_SPU
tristate "Broadcom symmetric crypto/hash acceleration support"
depends on ARCH_BCM_IPROC
- depends on BCM_PDC_MBOX
+ depends on MAILBOX
default m
select CRYPTO_DES
select CRYPTO_MD5
diff --git a/drivers/crypto/atmel-sha.c b/drivers/crypto/atmel-sha.c
index a948202..dad4e5b 100644
--- a/drivers/crypto/atmel-sha.c
+++ b/drivers/crypto/atmel-sha.c
@@ -1204,7 +1204,9 @@
ctx->flags |= SHA_FLAGS_FINUP;
err1 = atmel_sha_update(req);
- if (err1 == -EINPROGRESS || err1 == -EBUSY)
+ if (err1 == -EINPROGRESS ||
+ (err1 == -EBUSY && (ahash_request_flags(req) &
+ CRYPTO_TFM_REQ_MAY_BACKLOG)))
return err1;
/*
diff --git a/drivers/crypto/bcm/spu2.c b/drivers/crypto/bcm/spu2.c
index ef04c97..bf7ac62 100644
--- a/drivers/crypto/bcm/spu2.c
+++ b/drivers/crypto/bcm/spu2.c
@@ -302,6 +302,7 @@
break;
case HASH_ALG_SHA3_512:
*spu2_type = SPU2_HASH_TYPE_SHA3_512;
+ break;
case HASH_ALG_LAST:
default:
err = -EINVAL;
diff --git a/drivers/crypto/caam/caamalg.c b/drivers/crypto/caam/caamalg.c
index fde399c..0488b7f 100644
--- a/drivers/crypto/caam/caamalg.c
+++ b/drivers/crypto/caam/caamalg.c
@@ -882,10 +882,10 @@
{
struct ablkcipher_request *req = context;
struct ablkcipher_edesc *edesc;
-#ifdef DEBUG
struct crypto_ablkcipher *ablkcipher = crypto_ablkcipher_reqtfm(req);
int ivsize = crypto_ablkcipher_ivsize(ablkcipher);
+#ifdef DEBUG
dev_err(jrdev, "%s %d: err 0x%x\n", __func__, __LINE__, err);
#endif
@@ -904,6 +904,14 @@
#endif
ablkcipher_unmap(jrdev, edesc, req);
+
+ /*
+ * The crypto API expects us to set the IV (req->info) to the last
+ * ciphertext block. This is used e.g. by the CTS mode.
+ */
+ scatterwalk_map_and_copy(req->info, req->dst, req->nbytes - ivsize,
+ ivsize, 0);
+
kfree(edesc);
ablkcipher_request_complete(req, err);
@@ -914,10 +922,10 @@
{
struct ablkcipher_request *req = context;
struct ablkcipher_edesc *edesc;
-#ifdef DEBUG
struct crypto_ablkcipher *ablkcipher = crypto_ablkcipher_reqtfm(req);
int ivsize = crypto_ablkcipher_ivsize(ablkcipher);
+#ifdef DEBUG
dev_err(jrdev, "%s %d: err 0x%x\n", __func__, __LINE__, err);
#endif
@@ -935,6 +943,14 @@
#endif
ablkcipher_unmap(jrdev, edesc, req);
+
+ /*
+ * The crypto API expects us to set the IV (req->info) to the last
+ * ciphertext block.
+ */
+ scatterwalk_map_and_copy(req->info, req->src, req->nbytes - ivsize,
+ ivsize, 0);
+
kfree(edesc);
ablkcipher_request_complete(req, err);
diff --git a/drivers/crypto/caam/caamhash.c b/drivers/crypto/caam/caamhash.c
index 7c44c90..910ec61 100644
--- a/drivers/crypto/caam/caamhash.c
+++ b/drivers/crypto/caam/caamhash.c
@@ -396,7 +396,7 @@
ret = caam_jr_enqueue(jrdev, desc, split_key_done, &result);
if (!ret) {
/* in progress */
- wait_for_completion_interruptible(&result.completion);
+ wait_for_completion(&result.completion);
ret = result.err;
#ifdef DEBUG
print_hex_dump(KERN_ERR,
diff --git a/drivers/crypto/caam/key_gen.c b/drivers/crypto/caam/key_gen.c
index 1bb2816..c425d4a 100644
--- a/drivers/crypto/caam/key_gen.c
+++ b/drivers/crypto/caam/key_gen.c
@@ -149,7 +149,7 @@
ret = caam_jr_enqueue(jrdev, desc, split_key_done, &result);
if (!ret) {
/* in progress */
- wait_for_completion_interruptible(&result.completion);
+ wait_for_completion(&result.completion);
ret = result.err;
#ifdef DEBUG
print_hex_dump(KERN_ERR, "ctx.key@"__stringify(__LINE__)": ",
diff --git a/drivers/crypto/cavium/cpt/cptvf_algs.c b/drivers/crypto/cavium/cpt/cptvf_algs.c
index 1b220f3..df21d99 100644
--- a/drivers/crypto/cavium/cpt/cptvf_algs.c
+++ b/drivers/crypto/cavium/cpt/cptvf_algs.c
@@ -222,17 +222,17 @@
return -EINPROGRESS;
}
-int cvm_encrypt(struct ablkcipher_request *req)
+static int cvm_encrypt(struct ablkcipher_request *req)
{
return cvm_enc_dec(req, true);
}
-int cvm_decrypt(struct ablkcipher_request *req)
+static int cvm_decrypt(struct ablkcipher_request *req)
{
return cvm_enc_dec(req, false);
}
-int cvm_xts_setkey(struct crypto_ablkcipher *cipher, const u8 *key,
+static int cvm_xts_setkey(struct crypto_ablkcipher *cipher, const u8 *key,
u32 keylen)
{
struct crypto_tfm *tfm = crypto_ablkcipher_tfm(cipher);
@@ -336,7 +336,7 @@
return cvm_setkey(cipher, key, keylen, DES3_ECB);
}
-int cvm_enc_dec_init(struct crypto_tfm *tfm)
+static int cvm_enc_dec_init(struct crypto_tfm *tfm)
{
struct cvm_enc_ctx *ctx = crypto_tfm_ctx(tfm);
diff --git a/drivers/crypto/cavium/nitrox/nitrox_main.c b/drivers/crypto/cavium/nitrox/nitrox_main.c
index ae44a46..9ccefb9 100644
--- a/drivers/crypto/cavium/nitrox/nitrox_main.c
+++ b/drivers/crypto/cavium/nitrox/nitrox_main.c
@@ -18,8 +18,9 @@
#define SE_GROUP 0
#define DRIVER_VERSION "1.0"
+#define FW_DIR "cavium/"
/* SE microcode */
-#define SE_FW "cnn55xx_se.fw"
+#define SE_FW FW_DIR "cnn55xx_se.fw"
static const char nitrox_driver_name[] = "CNN55XX";
diff --git a/drivers/crypto/chelsio/chcr_algo.c b/drivers/crypto/chelsio/chcr_algo.c
index cfc723a..0e81607 100644
--- a/drivers/crypto/chelsio/chcr_algo.c
+++ b/drivers/crypto/chelsio/chcr_algo.c
@@ -898,26 +898,20 @@
u8 *key;
unsigned int keylen;
- cipher = crypto_alloc_cipher("aes-generic", 0, 0);
+ cipher = ablkctx->aes_generic;
memcpy(iv, req->info, AES_BLOCK_SIZE);
- if (IS_ERR(cipher)) {
- ret = -ENOMEM;
- goto out;
- }
keylen = ablkctx->enckey_len / 2;
key = ablkctx->key + keylen;
ret = crypto_cipher_setkey(cipher, key, keylen);
if (ret)
- goto out1;
+ goto out;
crypto_cipher_encrypt_one(cipher, iv, iv);
for (i = 0; i < (reqctx->processed / AES_BLOCK_SIZE); i++)
gf128mul_x_ble((le128 *)iv, (le128 *)iv);
crypto_cipher_decrypt_one(cipher, iv, iv);
-out1:
- crypto_free_cipher(cipher);
out:
return ret;
}
@@ -1261,6 +1255,17 @@
pr_err("failed to allocate fallback for %s\n", alg->cra_name);
return PTR_ERR(ablkctx->sw_cipher);
}
+
+ if (get_cryptoalg_subtype(tfm) == CRYPTO_ALG_SUB_TYPE_XTS) {
+ /* To update tweak*/
+ ablkctx->aes_generic = crypto_alloc_cipher("aes-generic", 0, 0);
+ if (IS_ERR(ablkctx->aes_generic)) {
+ pr_err("failed to allocate aes cipher for tweak\n");
+ return PTR_ERR(ablkctx->aes_generic);
+ }
+ } else
+ ablkctx->aes_generic = NULL;
+
tfm->crt_ablkcipher.reqsize = sizeof(struct chcr_blkcipher_req_ctx);
return chcr_device_init(crypto_tfm_ctx(tfm));
}
@@ -1291,6 +1296,8 @@
struct ablk_ctx *ablkctx = ABLK_CTX(ctx);
crypto_free_skcipher(ablkctx->sw_cipher);
+ if (ablkctx->aes_generic)
+ crypto_free_cipher(ablkctx->aes_generic);
}
static int get_alg_config(struct algo_param *params,
diff --git a/drivers/crypto/chelsio/chcr_crypto.h b/drivers/crypto/chelsio/chcr_crypto.h
index a4f95b0..30af1ee 100644
--- a/drivers/crypto/chelsio/chcr_crypto.h
+++ b/drivers/crypto/chelsio/chcr_crypto.h
@@ -155,6 +155,7 @@
struct ablk_ctx {
struct crypto_skcipher *sw_cipher;
+ struct crypto_cipher *aes_generic;
__be32 key_ctx_hdr;
unsigned int enckey_len;
unsigned char ciph_mode;
diff --git a/drivers/crypto/inside-secure/safexcel.c b/drivers/crypto/inside-secure/safexcel.c
index e7f87ac..1fabd4a 100644
--- a/drivers/crypto/inside-secure/safexcel.c
+++ b/drivers/crypto/inside-secure/safexcel.c
@@ -773,7 +773,6 @@
struct device *dev = &pdev->dev;
struct resource *res;
struct safexcel_crypto_priv *priv;
- u64 dma_mask;
int i, ret;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
@@ -802,9 +801,7 @@
return -EPROBE_DEFER;
}
- if (of_property_read_u64(dev->of_node, "dma-mask", &dma_mask))
- dma_mask = DMA_BIT_MASK(64);
- ret = dma_set_mask_and_coherent(dev, dma_mask);
+ ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
if (ret)
goto err_clk;
diff --git a/drivers/dax/device-dax.h b/drivers/dax/device-dax.h
index fdcd976..688b051 100644
--- a/drivers/dax/device-dax.h
+++ b/drivers/dax/device-dax.h
@@ -21,5 +21,5 @@
int region_id, struct resource *res, unsigned int align,
void *addr, unsigned long flags);
struct dev_dax *devm_create_dev_dax(struct dax_region *dax_region,
- struct resource *res, int count);
+ int id, struct resource *res, int count);
#endif /* __DEVICE_DAX_H__ */
diff --git a/drivers/dax/device.c b/drivers/dax/device.c
index 12943d1..e9f3b3e 100644
--- a/drivers/dax/device.c
+++ b/drivers/dax/device.c
@@ -529,7 +529,8 @@
struct dax_region *dax_region = dev_dax->region;
struct dax_device *dax_dev = dev_dax->dax_dev;
- ida_simple_remove(&dax_region->ida, dev_dax->id);
+ if (dev_dax->id >= 0)
+ ida_simple_remove(&dax_region->ida, dev_dax->id);
dax_region_put(dax_region);
put_dax(dax_dev);
kfree(dev_dax);
@@ -559,7 +560,7 @@
}
struct dev_dax *devm_create_dev_dax(struct dax_region *dax_region,
- struct resource *res, int count)
+ int id, struct resource *res, int count)
{
struct device *parent = dax_region->dev;
struct dax_device *dax_dev;
@@ -567,7 +568,10 @@
struct inode *inode;
struct device *dev;
struct cdev *cdev;
- int rc = 0, i;
+ int rc, i;
+
+ if (!count)
+ return ERR_PTR(-EINVAL);
dev_dax = kzalloc(sizeof(*dev_dax) + sizeof(*res) * count, GFP_KERNEL);
if (!dev_dax)
@@ -587,10 +591,16 @@
if (i < count)
goto err_id;
- dev_dax->id = ida_simple_get(&dax_region->ida, 0, 0, GFP_KERNEL);
- if (dev_dax->id < 0) {
- rc = dev_dax->id;
- goto err_id;
+ if (id < 0) {
+ id = ida_simple_get(&dax_region->ida, 0, 0, GFP_KERNEL);
+ dev_dax->id = id;
+ if (id < 0) {
+ rc = id;
+ goto err_id;
+ }
+ } else {
+ /* region provider owns @id lifetime */
+ dev_dax->id = -1;
}
/*
@@ -598,8 +608,10 @@
* device outside of mmap of the resulting character device.
*/
dax_dev = alloc_dax(dev_dax, NULL, NULL);
- if (!dax_dev)
+ if (!dax_dev) {
+ rc = -ENOMEM;
goto err_dax;
+ }
/* from here on we're committed to teardown via dax_dev_release() */
dev = &dev_dax->dev;
@@ -620,7 +632,7 @@
dev->parent = parent;
dev->groups = dax_attribute_groups;
dev->release = dev_dax_release;
- dev_set_name(dev, "dax%d.%d", dax_region->id, dev_dax->id);
+ dev_set_name(dev, "dax%d.%d", dax_region->id, id);
rc = cdev_device_add(cdev, dev);
if (rc) {
@@ -636,7 +648,8 @@
return dev_dax;
err_dax:
- ida_simple_remove(&dax_region->ida, dev_dax->id);
+ if (dev_dax->id >= 0)
+ ida_simple_remove(&dax_region->ida, dev_dax->id);
err_id:
kfree(dev_dax);
diff --git a/drivers/dax/pmem.c b/drivers/dax/pmem.c
index 9f2a0b4..8d8c852 100644
--- a/drivers/dax/pmem.c
+++ b/drivers/dax/pmem.c
@@ -58,13 +58,12 @@
static int dax_pmem_probe(struct device *dev)
{
- int rc;
void *addr;
struct resource res;
+ int rc, id, region_id;
struct nd_pfn_sb *pfn_sb;
struct dev_dax *dev_dax;
struct dax_pmem *dax_pmem;
- struct nd_region *nd_region;
struct nd_namespace_io *nsio;
struct dax_region *dax_region;
struct nd_namespace_common *ndns;
@@ -123,14 +122,17 @@
/* adjust the dax_region resource to the start of data */
res.start += le64_to_cpu(pfn_sb->dataoff);
- nd_region = to_nd_region(dev->parent);
- dax_region = alloc_dax_region(dev, nd_region->id, &res,
+ rc = sscanf(dev_name(&ndns->dev), "namespace%d.%d", ®ion_id, &id);
+ if (rc != 2)
+ return -EINVAL;
+
+ dax_region = alloc_dax_region(dev, region_id, &res,
le32_to_cpu(pfn_sb->align), addr, PFN_DEV|PFN_MAP);
if (!dax_region)
return -ENOMEM;
/* TODO: support for subdividing a dax region... */
- dev_dax = devm_create_dev_dax(dax_region, &res, 1);
+ dev_dax = devm_create_dev_dax(dax_region, id, &res, 1);
/* child dev_dax instances now own the lifetime of the dax_region */
dax_region_put(dax_region);
diff --git a/drivers/dax/super.c b/drivers/dax/super.c
index ce9e563..938eb48 100644
--- a/drivers/dax/super.c
+++ b/drivers/dax/super.c
@@ -278,6 +278,12 @@
}
EXPORT_SYMBOL_GPL(dax_write_cache);
+bool dax_write_cache_enabled(struct dax_device *dax_dev)
+{
+ return test_bit(DAXDEV_WRITE_CACHE, &dax_dev->flags);
+}
+EXPORT_SYMBOL_GPL(dax_write_cache_enabled);
+
bool dax_alive(struct dax_device *dax_dev)
{
lockdep_assert_held(&dax_srcu);
diff --git a/drivers/devfreq/governor_userspace.c b/drivers/devfreq/governor_userspace.c
index 1769760..77028c2 100644
--- a/drivers/devfreq/governor_userspace.c
+++ b/drivers/devfreq/governor_userspace.c
@@ -86,7 +86,7 @@
&dev_attr_set_freq.attr,
NULL,
};
-static struct attribute_group dev_attr_group = {
+static const struct attribute_group dev_attr_group = {
.name = "userspace",
.attrs = dev_entries,
};
diff --git a/drivers/devfreq/rk3399_dmc.c b/drivers/devfreq/rk3399_dmc.c
index 40a2499..1b89ebb 100644
--- a/drivers/devfreq/rk3399_dmc.c
+++ b/drivers/devfreq/rk3399_dmc.c
@@ -336,8 +336,9 @@
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
- dev_err(&pdev->dev, "Cannot get the dmc interrupt resource\n");
- return -EINVAL;
+ dev_err(&pdev->dev,
+ "Cannot get the dmc interrupt resource: %d\n", irq);
+ return irq;
}
data = devm_kzalloc(dev, sizeof(struct rk3399_dmcfreq), GFP_KERNEL);
if (!data)
diff --git a/drivers/devfreq/tegra-devfreq.c b/drivers/devfreq/tegra-devfreq.c
index 214fff9..ae71215 100644
--- a/drivers/devfreq/tegra-devfreq.c
+++ b/drivers/devfreq/tegra-devfreq.c
@@ -688,9 +688,9 @@
}
irq = platform_get_irq(pdev, 0);
- if (irq <= 0) {
- dev_err(&pdev->dev, "Failed to get IRQ\n");
- return -ENODEV;
+ if (irq < 0) {
+ dev_err(&pdev->dev, "Failed to get IRQ: %d\n", irq);
+ return irq;
}
platform_set_drvdata(pdev, tegra);
diff --git a/drivers/dma-buf/dma-fence.c b/drivers/dma-buf/dma-fence.c
index 57da14c..56e0a0e 100644
--- a/drivers/dma-buf/dma-fence.c
+++ b/drivers/dma-buf/dma-fence.c
@@ -75,11 +75,6 @@
if (WARN_ON(!fence))
return -EINVAL;
- if (!ktime_to_ns(fence->timestamp)) {
- fence->timestamp = ktime_get();
- smp_mb__before_atomic();
- }
-
if (test_and_set_bit(DMA_FENCE_FLAG_SIGNALED_BIT, &fence->flags)) {
ret = -EINVAL;
@@ -87,8 +82,11 @@
* we might have raced with the unlocked dma_fence_signal,
* still run through all callbacks
*/
- } else
+ } else {
+ fence->timestamp = ktime_get();
+ set_bit(DMA_FENCE_FLAG_TIMESTAMP_BIT, &fence->flags);
trace_dma_fence_signaled(fence);
+ }
list_for_each_entry_safe(cur, tmp, &fence->cb_list, node) {
list_del_init(&cur->node);
@@ -115,14 +113,11 @@
if (!fence)
return -EINVAL;
- if (!ktime_to_ns(fence->timestamp)) {
- fence->timestamp = ktime_get();
- smp_mb__before_atomic();
- }
-
if (test_and_set_bit(DMA_FENCE_FLAG_SIGNALED_BIT, &fence->flags))
return -EINVAL;
+ fence->timestamp = ktime_get();
+ set_bit(DMA_FENCE_FLAG_TIMESTAMP_BIT, &fence->flags);
trace_dma_fence_signaled(fence);
if (test_bit(DMA_FENCE_FLAG_ENABLE_SIGNAL_BIT, &fence->flags)) {
diff --git a/drivers/dma-buf/sync_debug.c b/drivers/dma-buf/sync_debug.c
index 82a6e7f..59a3b2f8 100644
--- a/drivers/dma-buf/sync_debug.c
+++ b/drivers/dma-buf/sync_debug.c
@@ -84,7 +84,7 @@
show ? "_" : "",
sync_status_str(status));
- if (status) {
+ if (test_bit(DMA_FENCE_FLAG_TIMESTAMP_BIT, &fence->flags)) {
struct timespec64 ts64 =
ktime_to_timespec64(fence->timestamp);
diff --git a/drivers/dma-buf/sync_file.c b/drivers/dma-buf/sync_file.c
index 545e2c5..d7e219d 100644
--- a/drivers/dma-buf/sync_file.c
+++ b/drivers/dma-buf/sync_file.c
@@ -391,7 +391,13 @@
sizeof(info->driver_name));
info->status = dma_fence_get_status(fence);
- info->timestamp_ns = ktime_to_ns(fence->timestamp);
+ while (test_bit(DMA_FENCE_FLAG_SIGNALED_BIT, &fence->flags) &&
+ !test_bit(DMA_FENCE_FLAG_TIMESTAMP_BIT, &fence->flags))
+ cpu_relax();
+ info->timestamp_ns =
+ test_bit(DMA_FENCE_FLAG_TIMESTAMP_BIT, &fence->flags) ?
+ ktime_to_ns(fence->timestamp) :
+ ktime_set(0, 0);
}
static long sync_file_ioctl_fence_info(struct sync_file *sync_file,
diff --git a/drivers/firmware/efi/libstub/Makefile b/drivers/firmware/efi/libstub/Makefile
index f742596..37e24f5 100644
--- a/drivers/firmware/efi/libstub/Makefile
+++ b/drivers/firmware/efi/libstub/Makefile
@@ -17,6 +17,7 @@
cflags-$(CONFIG_EFI_ARMSTUB) += -I$(srctree)/scripts/dtc/libfdt
KBUILD_CFLAGS := $(cflags-y) -DDISABLE_BRANCH_PROFILING \
+ -D__NO_FORTIFY \
$(call cc-option,-ffreestanding) \
$(call cc-option,-fno-stack-protector)
diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
index a485864..06432d8 100644
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@@ -532,7 +532,7 @@
return (x & FSI_SMODE_SID_MASK) << FSI_SMODE_SID_SHIFT;
}
-static const uint32_t fsi_slave_smode(int id)
+static uint32_t fsi_slave_smode(int id)
{
return FSI_SMODE_WSC | FSI_SMODE_ECRC
| fsi_smode_sid(id)
@@ -883,17 +883,16 @@
};
EXPORT_SYMBOL_GPL(fsi_bus_type);
-static int fsi_init(void)
+static int __init fsi_init(void)
{
return bus_register(&fsi_bus_type);
}
+postcore_initcall(fsi_init);
static void fsi_exit(void)
{
bus_unregister(&fsi_bus_type);
}
-
-module_init(fsi_init);
module_exit(fsi_exit);
module_param(discard_errors, int, 0664);
MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index f235eae..461d6fc 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -504,6 +504,7 @@
depends on ARCH_XGENE && OF_GPIO
select GPIO_GENERIC
select GPIOLIB_IRQCHIP
+ select IRQ_DOMAIN_HIERARCHY
help
This driver supports the GPIO block within the APM X-Gene
Standby Domain. Say yes here to enable the GPIO functionality.
diff --git a/drivers/gpio/gpio-exar.c b/drivers/gpio/gpio-exar.c
index fb8d304..0ecd236 100644
--- a/drivers/gpio/gpio-exar.c
+++ b/drivers/gpio/gpio-exar.c
@@ -132,7 +132,7 @@
if (!p)
return -ENOMEM;
- ret = device_property_read_u32(&pdev->dev, "linux,first-pin",
+ ret = device_property_read_u32(&pdev->dev, "exar,first-pin",
&first_pin);
if (ret)
return ret;
diff --git a/drivers/gpio/gpio-lp87565.c b/drivers/gpio/gpio-lp87565.c
index 6313c50..a121c8f 100644
--- a/drivers/gpio/gpio-lp87565.c
+++ b/drivers/gpio/gpio-lp87565.c
@@ -26,6 +26,27 @@
struct regmap *map;
};
+static int lp87565_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+ struct lp87565_gpio *gpio = gpiochip_get_data(chip);
+ int ret, val;
+
+ ret = regmap_read(gpio->map, LP87565_REG_GPIO_IN, &val);
+ if (ret < 0)
+ return ret;
+
+ return !!(val & BIT(offset));
+}
+
+static void lp87565_gpio_set(struct gpio_chip *chip, unsigned int offset,
+ int value)
+{
+ struct lp87565_gpio *gpio = gpiochip_get_data(chip);
+
+ regmap_update_bits(gpio->map, LP87565_REG_GPIO_OUT,
+ BIT(offset), value ? BIT(offset) : 0);
+}
+
static int lp87565_gpio_get_direction(struct gpio_chip *chip,
unsigned int offset)
{
@@ -54,30 +75,11 @@
{
struct lp87565_gpio *gpio = gpiochip_get_data(chip);
+ lp87565_gpio_set(chip, offset, value);
+
return regmap_update_bits(gpio->map,
LP87565_REG_GPIO_CONFIG,
- BIT(offset), !value ? BIT(offset) : 0);
-}
-
-static int lp87565_gpio_get(struct gpio_chip *chip, unsigned int offset)
-{
- struct lp87565_gpio *gpio = gpiochip_get_data(chip);
- int ret, val;
-
- ret = regmap_read(gpio->map, LP87565_REG_GPIO_IN, &val);
- if (ret < 0)
- return ret;
-
- return !!(val & BIT(offset));
-}
-
-static void lp87565_gpio_set(struct gpio_chip *chip, unsigned int offset,
- int value)
-{
- struct lp87565_gpio *gpio = gpiochip_get_data(chip);
-
- regmap_update_bits(gpio->map, LP87565_REG_GPIO_OUT,
- BIT(offset), value ? BIT(offset) : 0);
+ BIT(offset), BIT(offset));
}
static int lp87565_gpio_request(struct gpio_chip *gc, unsigned int offset)
diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index 3abea3f..9269225 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -424,6 +424,9 @@
return PTR_ERR(port->base);
port->irq_high = platform_get_irq(pdev, 1);
+ if (port->irq_high < 0)
+ port->irq_high = 0;
+
port->irq = platform_get_irq(pdev, 0);
if (port->irq < 0)
return port->irq;
diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
index 88529d3..506c6a6 100644
--- a/drivers/gpio/gpio-tegra.c
+++ b/drivers/gpio/gpio-tegra.c
@@ -360,7 +360,7 @@
{
int port;
int pin;
- int unmasked = 0;
+ bool unmasked = false;
int gpio;
u32 lvl;
unsigned long sta;
@@ -384,8 +384,8 @@
* before executing the handler so that we don't
* miss edges
*/
- if (lvl & (0x100 << pin)) {
- unmasked = 1;
+ if (!unmasked && lvl & (0x100 << pin)) {
+ unmasked = true;
chained_irq_exit(chip, desc);
}
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 9568708..cd003b7 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -704,24 +704,23 @@
{
struct lineevent_state *le = p;
struct gpioevent_data ge;
- int ret;
+ int ret, level;
ge.timestamp = ktime_get_real_ns();
+ level = gpiod_get_value_cansleep(le->desc);
if (le->eflags & GPIOEVENT_REQUEST_RISING_EDGE
&& le->eflags & GPIOEVENT_REQUEST_FALLING_EDGE) {
- int level = gpiod_get_value_cansleep(le->desc);
-
if (level)
/* Emit low-to-high event */
ge.id = GPIOEVENT_EVENT_RISING_EDGE;
else
/* Emit high-to-low event */
ge.id = GPIOEVENT_EVENT_FALLING_EDGE;
- } else if (le->eflags & GPIOEVENT_REQUEST_RISING_EDGE) {
+ } else if (le->eflags & GPIOEVENT_REQUEST_RISING_EDGE && level) {
/* Emit low-to-high event */
ge.id = GPIOEVENT_EVENT_RISING_EDGE;
- } else if (le->eflags & GPIOEVENT_REQUEST_FALLING_EDGE) {
+ } else if (le->eflags & GPIOEVENT_REQUEST_FALLING_EDGE && !level) {
/* Emit high-to-low event */
ge.id = GPIOEVENT_EVENT_FALLING_EDGE;
} else {
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c
index 5f8ada1..37971d9 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c
@@ -101,7 +101,6 @@
if (adev->kfd) {
struct kgd2kfd_shared_resources gpu_resources = {
.compute_vmid_bitmap = 0xFF00,
- .num_mec = adev->gfx.mec.num_mec,
.num_pipe_per_mec = adev->gfx.mec.num_pipe_per_mec,
.num_queue_per_pipe = adev->gfx.mec.num_queue_per_pipe
};
@@ -122,7 +121,7 @@
/* According to linux/bitmap.h we shouldn't use bitmap_clear if
* nbits is not compile time constant */
- last_valid_bit = adev->gfx.mec.num_mec
+ last_valid_bit = 1 /* only first MEC can have compute queues */
* adev->gfx.mec.num_pipe_per_mec
* adev->gfx.mec.num_queue_per_pipe;
for (i = last_valid_bit; i < KGD_MAX_QUEUES; ++i)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_bo_list.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_bo_list.c
index f621ee1..5e771bc11b 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_bo_list.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_bo_list.c
@@ -198,12 +198,16 @@
result = idr_find(&fpriv->bo_list_handles, id);
if (result) {
- if (kref_get_unless_zero(&result->refcount))
+ if (kref_get_unless_zero(&result->refcount)) {
+ rcu_read_unlock();
mutex_lock(&result->lock);
- else
+ } else {
+ rcu_read_unlock();
result = NULL;
+ }
+ } else {
+ rcu_read_unlock();
}
- rcu_read_unlock();
return result;
}
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c
index 38f739f..6558a3e 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c
@@ -359,7 +359,7 @@
head = bo->mn_list.next;
bo->mn = NULL;
- list_del(&bo->mn_list);
+ list_del_init(&bo->mn_list);
if (list_empty(head)) {
struct amdgpu_mn_node *node;
diff --git a/drivers/gpu/drm/amd/amdgpu/clearstate_gfx9.h b/drivers/gpu/drm/amd/amdgpu/clearstate_gfx9.h
index 18fd01f3..003a131 100644
--- a/drivers/gpu/drm/amd/amdgpu/clearstate_gfx9.h
+++ b/drivers/gpu/drm/amd/amdgpu/clearstate_gfx9.h
@@ -1,24 +1,25 @@
-
/*
-***************************************************************************************************
-*
-* Trade secret of Advanced Micro Devices, Inc.
-* Copyright (c) 2010 Advanced Micro Devices, Inc. (unpublished)
-*
-* All rights reserved. This notice is intended as a precaution against inadvertent publication and
-* does not imply publication or any waiver of confidentiality. The year included in the foregoing
-* notice is the year of creation of the work.
-*
-***************************************************************************************************
-*/
-/**
-***************************************************************************************************
-* @brief gfx9 Clearstate Definitions
-***************************************************************************************************
-*
-* Do not edit! This is a machine-generated file!
-*
-*/
+ * Copyright 2017 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
static const unsigned int gfx9_SECT_CONTEXT_def_1[] =
{
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
index 3a0b69b..c9b9c88 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
@@ -1475,21 +1475,23 @@
static void gfx_v9_0_select_se_sh(struct amdgpu_device *adev, u32 se_num, u32 sh_num, u32 instance)
{
- u32 data = REG_SET_FIELD(0, GRBM_GFX_INDEX, INSTANCE_BROADCAST_WRITES, 1);
+ u32 data;
- if ((se_num == 0xffffffff) && (sh_num == 0xffffffff)) {
- data = REG_SET_FIELD(data, GRBM_GFX_INDEX, SH_BROADCAST_WRITES, 1);
+ if (instance == 0xffffffff)
+ data = REG_SET_FIELD(0, GRBM_GFX_INDEX, INSTANCE_BROADCAST_WRITES, 1);
+ else
+ data = REG_SET_FIELD(0, GRBM_GFX_INDEX, INSTANCE_INDEX, instance);
+
+ if (se_num == 0xffffffff)
data = REG_SET_FIELD(data, GRBM_GFX_INDEX, SE_BROADCAST_WRITES, 1);
- } else if (se_num == 0xffffffff) {
- data = REG_SET_FIELD(data, GRBM_GFX_INDEX, SH_INDEX, sh_num);
- data = REG_SET_FIELD(data, GRBM_GFX_INDEX, SE_BROADCAST_WRITES, 1);
- } else if (sh_num == 0xffffffff) {
+ else
+ data = REG_SET_FIELD(data, GRBM_GFX_INDEX, SE_INDEX, se_num);
+
+ if (sh_num == 0xffffffff)
data = REG_SET_FIELD(data, GRBM_GFX_INDEX, SH_BROADCAST_WRITES, 1);
- data = REG_SET_FIELD(data, GRBM_GFX_INDEX, SE_INDEX, se_num);
- } else {
+ else
data = REG_SET_FIELD(data, GRBM_GFX_INDEX, SH_INDEX, sh_num);
- data = REG_SET_FIELD(data, GRBM_GFX_INDEX, SE_INDEX, se_num);
- }
+
WREG32_SOC15(GC, 0, mmGRBM_GFX_INDEX, data);
}
diff --git a/drivers/gpu/drm/amd/amdgpu/si.c b/drivers/gpu/drm/amd/amdgpu/si.c
index f45fb0f..4267fa4 100644
--- a/drivers/gpu/drm/amd/amdgpu/si.c
+++ b/drivers/gpu/drm/amd/amdgpu/si.c
@@ -1385,6 +1385,7 @@
amdgpu_program_register_sequence(adev,
pitcairn_mgcg_cgcg_init,
(const u32)ARRAY_SIZE(pitcairn_mgcg_cgcg_init));
+ break;
case CHIP_VERDE:
amdgpu_program_register_sequence(adev,
verde_golden_registers,
@@ -1409,6 +1410,7 @@
amdgpu_program_register_sequence(adev,
oland_mgcg_cgcg_init,
(const u32)ARRAY_SIZE(oland_mgcg_cgcg_init));
+ break;
case CHIP_HAINAN:
amdgpu_program_register_sequence(adev,
hainan_golden_registers,
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device.c b/drivers/gpu/drm/amd/amdkfd/kfd_device.c
index 88187bf..3f95f7c 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_device.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_device.c
@@ -226,10 +226,6 @@
kfd->shared_resources = *gpu_resources;
- /* We only use the first MEC */
- if (kfd->shared_resources.num_mec > 1)
- kfd->shared_resources.num_mec = 1;
-
/* calculate max size of mqds needed for queues */
size = max_num_of_queues_per_device *
kfd->device_info->mqd_size_aligned;
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
index 955aa30..602769c 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
@@ -77,13 +77,6 @@
return false;
}
-unsigned int get_mec_num(struct device_queue_manager *dqm)
-{
- BUG_ON(!dqm || !dqm->dev);
-
- return dqm->dev->shared_resources.num_mec;
-}
-
unsigned int get_queues_num(struct device_queue_manager *dqm)
{
BUG_ON(!dqm || !dqm->dev);
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h
index 66b9615..faf820a 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h
@@ -180,7 +180,6 @@
void device_queue_manager_init_vi(struct device_queue_manager_asic_ops *ops);
void program_sh_mem_settings(struct device_queue_manager *dqm,
struct qcm_process_device *qpd);
-unsigned int get_mec_num(struct device_queue_manager *dqm);
unsigned int get_queues_num(struct device_queue_manager *dqm);
unsigned int get_queues_per_pipe(struct device_queue_manager *dqm);
unsigned int get_pipes_per_mec(struct device_queue_manager *dqm);
diff --git a/drivers/gpu/drm/amd/include/kgd_kfd_interface.h b/drivers/gpu/drm/amd/include/kgd_kfd_interface.h
index 91ef148..36f3766 100644
--- a/drivers/gpu/drm/amd/include/kgd_kfd_interface.h
+++ b/drivers/gpu/drm/amd/include/kgd_kfd_interface.h
@@ -63,9 +63,6 @@
/* Bit n == 1 means VMID n is available for KFD. */
unsigned int compute_vmid_bitmap;
- /* number of mec available from the hardware */
- uint32_t num_mec;
-
/* number of pipes per mec */
uint32_t num_pipe_per_mec;
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_hwmgr.c
index d6f097f..197174e 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_hwmgr.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_hwmgr.c
@@ -2128,15 +2128,9 @@
pp_table->AvfsGbCksOff.m2_shift = 12;
pp_table->AvfsGbCksOff.b_shift = 0;
- for (i = 0; i < dep_table->count; i++) {
- if (dep_table->entries[i].sclk_offset == 0)
- pp_table->StaticVoltageOffsetVid[i] = 248;
- else
- pp_table->StaticVoltageOffsetVid[i] =
- (uint8_t)(dep_table->entries[i].sclk_offset *
- VOLTAGE_VID_OFFSET_SCALE2 /
- VOLTAGE_VID_OFFSET_SCALE1);
- }
+ for (i = 0; i < dep_table->count; i++)
+ pp_table->StaticVoltageOffsetVid[i] =
+ convert_to_vid((uint8_t)(dep_table->entries[i].sclk_offset));
if ((PPREGKEY_VEGA10QUADRATICEQUATION_DFLT !=
data->disp_clk_quad_eqn_a) &&
diff --git a/drivers/gpu/drm/bridge/panel.c b/drivers/gpu/drm/bridge/panel.c
index 99f9a4b..67fe19e 100644
--- a/drivers/gpu/drm/bridge/panel.c
+++ b/drivers/gpu/drm/bridge/panel.c
@@ -161,7 +161,7 @@
int ret;
if (!panel)
- return ERR_PTR(EINVAL);
+ return ERR_PTR(-EINVAL);
panel_bridge = devm_kzalloc(panel->dev, sizeof(*panel_bridge),
GFP_KERNEL);
diff --git a/drivers/gpu/drm/drm_dp_aux_dev.c b/drivers/gpu/drm/drm_dp_aux_dev.c
index ec1ed94..d34e509 100644
--- a/drivers/gpu/drm/drm_dp_aux_dev.c
+++ b/drivers/gpu/drm/drm_dp_aux_dev.c
@@ -32,6 +32,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/uaccess.h>
+#include <linux/uio.h>
#include <drm/drm_dp_helper.h>
#include <drm/drm_crtc.h>
#include <drm/drmP.h>
@@ -140,101 +141,83 @@
return fixed_size_llseek(file, offset, whence, AUX_MAX_OFFSET);
}
-static ssize_t auxdev_read(struct file *file, char __user *buf, size_t count,
- loff_t *offset)
+static ssize_t auxdev_read_iter(struct kiocb *iocb, struct iov_iter *to)
{
- size_t bytes_pending, num_bytes_processed = 0;
- struct drm_dp_aux_dev *aux_dev = file->private_data;
+ struct drm_dp_aux_dev *aux_dev = iocb->ki_filp->private_data;
+ loff_t pos = iocb->ki_pos;
ssize_t res = 0;
if (!atomic_inc_not_zero(&aux_dev->usecount))
return -ENODEV;
- bytes_pending = min((loff_t)count, AUX_MAX_OFFSET - (*offset));
+ iov_iter_truncate(to, AUX_MAX_OFFSET - pos);
- if (!access_ok(VERIFY_WRITE, buf, bytes_pending)) {
- res = -EFAULT;
- goto out;
- }
-
- while (bytes_pending > 0) {
- uint8_t localbuf[DP_AUX_MAX_PAYLOAD_BYTES];
- ssize_t todo = min_t(size_t, bytes_pending, sizeof(localbuf));
+ while (iov_iter_count(to)) {
+ uint8_t buf[DP_AUX_MAX_PAYLOAD_BYTES];
+ ssize_t todo = min(iov_iter_count(to), sizeof(buf));
if (signal_pending(current)) {
- res = num_bytes_processed ?
- num_bytes_processed : -ERESTARTSYS;
- goto out;
+ res = -ERESTARTSYS;
+ break;
}
- res = drm_dp_dpcd_read(aux_dev->aux, *offset, localbuf, todo);
- if (res <= 0) {
- res = num_bytes_processed ? num_bytes_processed : res;
- goto out;
+ res = drm_dp_dpcd_read(aux_dev->aux, pos, buf, todo);
+ if (res <= 0)
+ break;
+
+ if (copy_to_iter(buf, res, to) != res) {
+ res = -EFAULT;
+ break;
}
- if (__copy_to_user(buf + num_bytes_processed, localbuf, res)) {
- res = num_bytes_processed ?
- num_bytes_processed : -EFAULT;
- goto out;
- }
- bytes_pending -= res;
- *offset += res;
- num_bytes_processed += res;
- res = num_bytes_processed;
+
+ pos += res;
}
-out:
+ if (pos != iocb->ki_pos)
+ res = pos - iocb->ki_pos;
+ iocb->ki_pos = pos;
+
atomic_dec(&aux_dev->usecount);
wake_up_atomic_t(&aux_dev->usecount);
return res;
}
-static ssize_t auxdev_write(struct file *file, const char __user *buf,
- size_t count, loff_t *offset)
+static ssize_t auxdev_write_iter(struct kiocb *iocb, struct iov_iter *from)
{
- size_t bytes_pending, num_bytes_processed = 0;
- struct drm_dp_aux_dev *aux_dev = file->private_data;
+ struct drm_dp_aux_dev *aux_dev = iocb->ki_filp->private_data;
+ loff_t pos = iocb->ki_pos;
ssize_t res = 0;
if (!atomic_inc_not_zero(&aux_dev->usecount))
return -ENODEV;
- bytes_pending = min((loff_t)count, AUX_MAX_OFFSET - *offset);
+ iov_iter_truncate(from, AUX_MAX_OFFSET - pos);
- if (!access_ok(VERIFY_READ, buf, bytes_pending)) {
- res = -EFAULT;
- goto out;
- }
-
- while (bytes_pending > 0) {
- uint8_t localbuf[DP_AUX_MAX_PAYLOAD_BYTES];
- ssize_t todo = min_t(size_t, bytes_pending, sizeof(localbuf));
+ while (iov_iter_count(from)) {
+ uint8_t buf[DP_AUX_MAX_PAYLOAD_BYTES];
+ ssize_t todo = min(iov_iter_count(from), sizeof(buf));
if (signal_pending(current)) {
- res = num_bytes_processed ?
- num_bytes_processed : -ERESTARTSYS;
- goto out;
+ res = -ERESTARTSYS;
+ break;
}
- if (__copy_from_user(localbuf,
- buf + num_bytes_processed, todo)) {
- res = num_bytes_processed ?
- num_bytes_processed : -EFAULT;
- goto out;
+ if (!copy_from_iter_full(buf, todo, from)) {
+ res = -EFAULT;
+ break;
}
- res = drm_dp_dpcd_write(aux_dev->aux, *offset, localbuf, todo);
- if (res <= 0) {
- res = num_bytes_processed ? num_bytes_processed : res;
- goto out;
- }
- bytes_pending -= res;
- *offset += res;
- num_bytes_processed += res;
- res = num_bytes_processed;
+ res = drm_dp_dpcd_write(aux_dev->aux, pos, buf, todo);
+ if (res <= 0)
+ break;
+
+ pos += res;
}
-out:
+ if (pos != iocb->ki_pos)
+ res = pos - iocb->ki_pos;
+ iocb->ki_pos = pos;
+
atomic_dec(&aux_dev->usecount);
wake_up_atomic_t(&aux_dev->usecount);
return res;
@@ -251,8 +234,8 @@
static const struct file_operations auxdev_fops = {
.owner = THIS_MODULE,
.llseek = auxdev_llseek,
- .read = auxdev_read,
- .write = auxdev_write,
+ .read_iter = auxdev_read_iter,
+ .write_iter = auxdev_write_iter,
.open = auxdev_open,
.release = auxdev_release,
};
diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
index 213fb83..08af8d6 100644
--- a/drivers/gpu/drm/drm_dp_helper.c
+++ b/drivers/gpu/drm/drm_dp_helper.c
@@ -544,7 +544,7 @@
DP_DETAILED_CAP_INFO_AVAILABLE;
int clk;
int bpc;
- char id[6];
+ char id[7];
int len;
uint8_t rev[2];
int type = port_cap[0] & DP_DS_PORT_TYPE_MASK;
@@ -583,6 +583,7 @@
seq_puts(m, "\t\tType: N/A\n");
}
+ memset(id, 0, sizeof(id));
drm_dp_downstream_id(aux, id);
seq_printf(m, "\t\tID: %s\n", id);
@@ -591,7 +592,7 @@
seq_printf(m, "\t\tHW: %d.%d\n",
(rev[0] & 0xf0) >> 4, rev[0] & 0xf);
- len = drm_dp_dpcd_read(aux, DP_BRANCH_SW_REV, &rev, 2);
+ len = drm_dp_dpcd_read(aux, DP_BRANCH_SW_REV, rev, 2);
if (len > 0)
seq_printf(m, "\t\tSW: %d.%d\n", rev[0], rev[1]);
diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
index bfd237c..ae5f068 100644
--- a/drivers/gpu/drm/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/drm_dp_mst_topology.c
@@ -330,6 +330,13 @@
return false;
}
+ /*
+ * ignore out-of-order messages or messages that are part of a
+ * failed transaction
+ */
+ if (!recv_hdr.somt && !msg->have_somt)
+ return false;
+
/* get length contained in this portion */
msg->curchunk_len = recv_hdr.msg_len;
msg->curchunk_hdrlen = hdrlen;
@@ -2164,7 +2171,7 @@
}
EXPORT_SYMBOL(drm_dp_mst_topology_mgr_resume);
-static void drm_dp_get_one_sb_msg(struct drm_dp_mst_topology_mgr *mgr, bool up)
+static bool drm_dp_get_one_sb_msg(struct drm_dp_mst_topology_mgr *mgr, bool up)
{
int len;
u8 replyblock[32];
@@ -2179,12 +2186,12 @@
replyblock, len);
if (ret != len) {
DRM_DEBUG_KMS("failed to read DPCD down rep %d %d\n", len, ret);
- return;
+ return false;
}
ret = drm_dp_sideband_msg_build(msg, replyblock, len, true);
if (!ret) {
DRM_DEBUG_KMS("sideband msg build failed %d\n", replyblock[0]);
- return;
+ return false;
}
replylen = msg->curchunk_len + msg->curchunk_hdrlen;
@@ -2196,21 +2203,32 @@
ret = drm_dp_dpcd_read(mgr->aux, basereg + curreply,
replyblock, len);
if (ret != len) {
- DRM_DEBUG_KMS("failed to read a chunk\n");
+ DRM_DEBUG_KMS("failed to read a chunk (len %d, ret %d)\n",
+ len, ret);
+ return false;
}
+
ret = drm_dp_sideband_msg_build(msg, replyblock, len, false);
- if (ret == false)
+ if (!ret) {
DRM_DEBUG_KMS("failed to build sideband msg\n");
+ return false;
+ }
+
curreply += len;
replylen -= len;
}
+ return true;
}
static int drm_dp_mst_handle_down_rep(struct drm_dp_mst_topology_mgr *mgr)
{
int ret = 0;
- drm_dp_get_one_sb_msg(mgr, false);
+ if (!drm_dp_get_one_sb_msg(mgr, false)) {
+ memset(&mgr->down_rep_recv, 0,
+ sizeof(struct drm_dp_sideband_msg_rx));
+ return 0;
+ }
if (mgr->down_rep_recv.have_eomt) {
struct drm_dp_sideband_msg_tx *txmsg;
@@ -2266,7 +2284,12 @@
static int drm_dp_mst_handle_up_req(struct drm_dp_mst_topology_mgr *mgr)
{
int ret = 0;
- drm_dp_get_one_sb_msg(mgr, true);
+
+ if (!drm_dp_get_one_sb_msg(mgr, true)) {
+ memset(&mgr->up_req_recv, 0,
+ sizeof(struct drm_dp_sideband_msg_rx));
+ return 0;
+ }
if (mgr->up_req_recv.have_eomt) {
struct drm_dp_sideband_msg_req_body msg;
@@ -2318,7 +2341,9 @@
DRM_DEBUG_KMS("Got RSN: pn: %d avail_pbn %d\n", msg.u.resource_stat.port_number, msg.u.resource_stat.available_pbn);
}
- drm_dp_put_mst_branch_device(mstb);
+ if (mstb)
+ drm_dp_put_mst_branch_device(mstb);
+
memset(&mgr->up_req_recv, 0, sizeof(struct drm_dp_sideband_msg_rx));
}
return ret;
diff --git a/drivers/gpu/drm/drm_framebuffer.c b/drivers/gpu/drm/drm_framebuffer.c
index fc8ef42..b3ef4f1 100644
--- a/drivers/gpu/drm/drm_framebuffer.c
+++ b/drivers/gpu/drm/drm_framebuffer.c
@@ -832,6 +832,7 @@
drm_atomic_clean_old_fb(dev, plane_mask, ret);
if (ret == -EDEADLK) {
+ drm_atomic_state_clear(state);
drm_modeset_backoff(&ctx);
goto retry;
}
diff --git a/drivers/gpu/drm/drm_ioc32.c b/drivers/gpu/drm/drm_ioc32.c
index 0b2d8c4..d1f2028 100644
--- a/drivers/gpu/drm/drm_ioc32.c
+++ b/drivers/gpu/drm/drm_ioc32.c
@@ -112,6 +112,9 @@
v32.version_major = v.version_major;
v32.version_minor = v.version_minor;
v32.version_patchlevel = v.version_patchlevel;
+ v32.name_len = v.name_len;
+ v32.date_len = v.date_len;
+ v32.desc_len = v.desc_len;
if (copy_to_user((void __user *)arg, &v32, sizeof(v32)))
return -EFAULT;
return 0;
diff --git a/drivers/gpu/drm/drm_vblank.c b/drivers/gpu/drm/drm_vblank.c
index 463e4d8..e9f33cd 100644
--- a/drivers/gpu/drm/drm_vblank.c
+++ b/drivers/gpu/drm/drm_vblank.c
@@ -242,7 +242,7 @@
* Otherwise reinitialize delayed at next vblank interrupt and assign 0
* for now, to mark the vblanktimestamp as invalid.
*/
- if (!rc && in_vblank_irq)
+ if (!rc && !in_vblank_irq)
t_vblank = (struct timeval) {0, 0};
store_vblank(dev, pipe, diff, &t_vblank, cur_vblank);
diff --git a/drivers/gpu/drm/exynos/Kconfig b/drivers/gpu/drm/exynos/Kconfig
index 1d18534..305dc3d 100644
--- a/drivers/gpu/drm/exynos/Kconfig
+++ b/drivers/gpu/drm/exynos/Kconfig
@@ -75,6 +75,7 @@
config DRM_EXYNOS_HDMI
bool "HDMI"
depends on DRM_EXYNOS_MIXER || DRM_EXYNOS5433_DECON
+ select CEC_CORE if CEC_NOTIFIER
help
Choose this option if you want to use Exynos HDMI for DRM.
diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c
index 35a8dfc..242bd50 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_drv.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c
@@ -453,7 +453,6 @@
struct component_match *match;
pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
- exynos_drm_driver.num_ioctls = ARRAY_SIZE(exynos_ioctls);
match = exynos_drm_match_add(&pdev->dev);
if (IS_ERR(match))
diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index a11b795..b6a46d9 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -1651,8 +1651,6 @@
return ret;
dsi->bridge_node = of_graph_get_remote_node(node, DSI_PORT_IN, 0);
- if (!dsi->bridge_node)
- return -EINVAL;
return 0;
}
@@ -1687,9 +1685,11 @@
return ret;
}
- bridge = of_drm_find_bridge(dsi->bridge_node);
- if (bridge)
- drm_bridge_attach(encoder, bridge, NULL);
+ if (dsi->bridge_node) {
+ bridge = of_drm_find_bridge(dsi->bridge_node);
+ if (bridge)
+ drm_bridge_attach(encoder, bridge, NULL);
+ }
return mipi_dsi_host_register(&dsi->dsi_host);
}
diff --git a/drivers/gpu/drm/exynos/exynos_drm_mic.c b/drivers/gpu/drm/exynos/exynos_drm_mic.c
index e457205..16bbee8 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_mic.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_mic.c
@@ -340,16 +340,10 @@
void *data)
{
struct exynos_mic *mic = dev_get_drvdata(dev);
- int ret;
- mic->bridge.funcs = &mic_bridge_funcs;
- mic->bridge.of_node = dev->of_node;
mic->bridge.driver_private = mic;
- ret = drm_bridge_add(&mic->bridge);
- if (ret)
- DRM_ERROR("mic: Failed to add MIC to the global bridge list\n");
- return ret;
+ return 0;
}
static void exynos_mic_unbind(struct device *dev, struct device *master,
@@ -365,8 +359,6 @@
already_disabled:
mutex_unlock(&mic_mutex);
-
- drm_bridge_remove(&mic->bridge);
}
static const struct component_ops exynos_mic_component_ops = {
@@ -461,6 +453,15 @@
platform_set_drvdata(pdev, mic);
+ mic->bridge.funcs = &mic_bridge_funcs;
+ mic->bridge.of_node = dev->of_node;
+
+ ret = drm_bridge_add(&mic->bridge);
+ if (ret) {
+ DRM_ERROR("mic: Failed to add MIC to the global bridge list\n");
+ return ret;
+ }
+
pm_runtime_enable(dev);
ret = component_add(dev, &exynos_mic_component_ops);
@@ -479,8 +480,13 @@
static int exynos_mic_remove(struct platform_device *pdev)
{
+ struct exynos_mic *mic = platform_get_drvdata(pdev);
+
component_del(&pdev->dev, &exynos_mic_component_ops);
pm_runtime_disable(&pdev->dev);
+
+ drm_bridge_remove(&mic->bridge);
+
return 0;
}
diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c
index 06bfbe4..d3b69d6 100644
--- a/drivers/gpu/drm/exynos/exynos_hdmi.c
+++ b/drivers/gpu/drm/exynos/exynos_hdmi.c
@@ -1501,8 +1501,6 @@
*/
cancel_delayed_work(&hdata->hotplug_work);
cec_notifier_set_phys_addr(hdata->notifier, CEC_PHYS_ADDR_INVALID);
-
- hdmiphy_disable(hdata);
}
static const struct drm_encoder_helper_funcs exynos_hdmi_encoder_helper_funcs = {
@@ -1676,7 +1674,7 @@
return hdmi_bridge_init(hdata);
}
-static struct of_device_id hdmi_match_types[] = {
+static const struct of_device_id hdmi_match_types[] = {
{
.compatible = "samsung,exynos4210-hdmi",
.data = &exynos4210_hdmi_driver_data,
@@ -1934,8 +1932,7 @@
return 0;
}
-#ifdef CONFIG_PM
-static int exynos_hdmi_suspend(struct device *dev)
+static int __maybe_unused exynos_hdmi_suspend(struct device *dev)
{
struct hdmi_context *hdata = dev_get_drvdata(dev);
@@ -1944,7 +1941,7 @@
return 0;
}
-static int exynos_hdmi_resume(struct device *dev)
+static int __maybe_unused exynos_hdmi_resume(struct device *dev)
{
struct hdmi_context *hdata = dev_get_drvdata(dev);
int ret;
@@ -1955,7 +1952,6 @@
return 0;
}
-#endif
static const struct dev_pm_ops exynos_hdmi_pm_ops = {
SET_RUNTIME_PM_OPS(exynos_hdmi_suspend, exynos_hdmi_resume, NULL)
diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c
index 6bed4f3..a998a8d 100644
--- a/drivers/gpu/drm/exynos/exynos_mixer.c
+++ b/drivers/gpu/drm/exynos/exynos_mixer.c
@@ -1094,28 +1094,28 @@
.atomic_check = mixer_atomic_check,
};
-static struct mixer_drv_data exynos5420_mxr_drv_data = {
+static const struct mixer_drv_data exynos5420_mxr_drv_data = {
.version = MXR_VER_128_0_0_184,
.is_vp_enabled = 0,
};
-static struct mixer_drv_data exynos5250_mxr_drv_data = {
+static const struct mixer_drv_data exynos5250_mxr_drv_data = {
.version = MXR_VER_16_0_33_0,
.is_vp_enabled = 0,
};
-static struct mixer_drv_data exynos4212_mxr_drv_data = {
+static const struct mixer_drv_data exynos4212_mxr_drv_data = {
.version = MXR_VER_0_0_0_16,
.is_vp_enabled = 1,
};
-static struct mixer_drv_data exynos4210_mxr_drv_data = {
+static const struct mixer_drv_data exynos4210_mxr_drv_data = {
.version = MXR_VER_0_0_0_16,
.is_vp_enabled = 1,
.has_sclk = 1,
};
-static struct of_device_id mixer_match_types[] = {
+static const struct of_device_id mixer_match_types[] = {
{
.compatible = "samsung,exynos4210-mixer",
.data = &exynos4210_mxr_drv_data,
diff --git a/drivers/gpu/drm/i915/gvt/cmd_parser.c b/drivers/gpu/drm/i915/gvt/cmd_parser.c
index 51241de5..713848c 100644
--- a/drivers/gpu/drm/i915/gvt/cmd_parser.c
+++ b/drivers/gpu/drm/i915/gvt/cmd_parser.c
@@ -2536,6 +2536,11 @@
gma_head == gma_tail)
return 0;
+ if (!intel_gvt_ggtt_validate_range(s.vgpu, s.ring_start, s.ring_size)) {
+ ret = -EINVAL;
+ goto out;
+ }
+
ret = ip_gma_set(&s, gma_head);
if (ret)
goto out;
@@ -2579,6 +2584,11 @@
s.rb_va = wa_ctx->indirect_ctx.shadow_va;
s.workload = workload;
+ if (!intel_gvt_ggtt_validate_range(s.vgpu, s.ring_start, s.ring_size)) {
+ ret = -EINVAL;
+ goto out;
+ }
+
ret = ip_gma_set(&s, gma_head);
if (ret)
goto out;
diff --git a/drivers/gpu/drm/i915/gvt/display.c b/drivers/gpu/drm/i915/gvt/display.c
index e0261fc..7cb0818 100644
--- a/drivers/gpu/drm/i915/gvt/display.c
+++ b/drivers/gpu/drm/i915/gvt/display.c
@@ -197,6 +197,12 @@
(TRANS_DDI_BPC_8 | TRANS_DDI_MODE_SELECT_DP_SST |
(PORT_B << TRANS_DDI_PORT_SHIFT) |
TRANS_DDI_FUNC_ENABLE);
+ if (IS_BROADWELL(dev_priv)) {
+ vgpu_vreg(vgpu, PORT_CLK_SEL(PORT_B)) &=
+ ~PORT_CLK_SEL_MASK;
+ vgpu_vreg(vgpu, PORT_CLK_SEL(PORT_B)) |=
+ PORT_CLK_SEL_LCPLL_810;
+ }
vgpu_vreg(vgpu, DDI_BUF_CTL(PORT_B)) |= DDI_BUF_CTL_ENABLE;
vgpu_vreg(vgpu, DDI_BUF_CTL(PORT_B)) &= ~DDI_BUF_IS_IDLE;
vgpu_vreg(vgpu, SDEISR) |= SDE_PORTB_HOTPLUG_CPT;
@@ -211,6 +217,12 @@
(TRANS_DDI_BPC_8 | TRANS_DDI_MODE_SELECT_DP_SST |
(PORT_C << TRANS_DDI_PORT_SHIFT) |
TRANS_DDI_FUNC_ENABLE);
+ if (IS_BROADWELL(dev_priv)) {
+ vgpu_vreg(vgpu, PORT_CLK_SEL(PORT_C)) &=
+ ~PORT_CLK_SEL_MASK;
+ vgpu_vreg(vgpu, PORT_CLK_SEL(PORT_C)) |=
+ PORT_CLK_SEL_LCPLL_810;
+ }
vgpu_vreg(vgpu, DDI_BUF_CTL(PORT_C)) |= DDI_BUF_CTL_ENABLE;
vgpu_vreg(vgpu, DDI_BUF_CTL(PORT_C)) &= ~DDI_BUF_IS_IDLE;
vgpu_vreg(vgpu, SFUSE_STRAP) |= SFUSE_STRAP_DDIC_DETECTED;
@@ -225,6 +237,12 @@
(TRANS_DDI_BPC_8 | TRANS_DDI_MODE_SELECT_DP_SST |
(PORT_D << TRANS_DDI_PORT_SHIFT) |
TRANS_DDI_FUNC_ENABLE);
+ if (IS_BROADWELL(dev_priv)) {
+ vgpu_vreg(vgpu, PORT_CLK_SEL(PORT_D)) &=
+ ~PORT_CLK_SEL_MASK;
+ vgpu_vreg(vgpu, PORT_CLK_SEL(PORT_D)) |=
+ PORT_CLK_SEL_LCPLL_810;
+ }
vgpu_vreg(vgpu, DDI_BUF_CTL(PORT_D)) |= DDI_BUF_CTL_ENABLE;
vgpu_vreg(vgpu, DDI_BUF_CTL(PORT_D)) &= ~DDI_BUF_IS_IDLE;
vgpu_vreg(vgpu, SFUSE_STRAP) |= SFUSE_STRAP_DDID_DETECTED;
@@ -244,6 +262,10 @@
vgpu_vreg(vgpu, DDI_BUF_CTL(PORT_A)) |= DDI_INIT_DISPLAY_DETECTED;
}
+
+ /* Clear host CRT status, so guest couldn't detect this host CRT. */
+ if (IS_BROADWELL(dev_priv))
+ vgpu_vreg(vgpu, PCH_ADPA) &= ~ADPA_CRT_HOTPLUG_MONITOR_MASK;
}
static void clean_virtual_dp_monitor(struct intel_vgpu *vgpu, int port_num)
@@ -301,27 +323,27 @@
{
struct intel_gvt_irq *irq = &gvt->irq;
struct intel_vgpu *vgpu;
- bool have_enabled_pipe = false;
int pipe, id;
if (WARN_ON(!mutex_is_locked(&gvt->lock)))
return;
- hrtimer_cancel(&irq->vblank_timer.timer);
-
for_each_active_vgpu(gvt, vgpu, id) {
for (pipe = 0; pipe < I915_MAX_PIPES; pipe++) {
- have_enabled_pipe =
- pipe_is_enabled(vgpu, pipe);
- if (have_enabled_pipe)
- break;
+ if (pipe_is_enabled(vgpu, pipe))
+ goto out;
}
}
- if (have_enabled_pipe)
- hrtimer_start(&irq->vblank_timer.timer,
- ktime_add_ns(ktime_get(), irq->vblank_timer.period),
- HRTIMER_MODE_ABS);
+ /* all the pipes are disabled */
+ hrtimer_cancel(&irq->vblank_timer.timer);
+ return;
+
+out:
+ hrtimer_start(&irq->vblank_timer.timer,
+ ktime_add_ns(ktime_get(), irq->vblank_timer.period),
+ HRTIMER_MODE_ABS);
+
}
static void emulate_vblank_on_pipe(struct intel_vgpu *vgpu, int pipe)
diff --git a/drivers/gpu/drm/i915/gvt/gtt.c b/drivers/gpu/drm/i915/gvt/gtt.c
index 66374db..6166e34 100644
--- a/drivers/gpu/drm/i915/gvt/gtt.c
+++ b/drivers/gpu/drm/i915/gvt/gtt.c
@@ -2259,6 +2259,8 @@
ret = setup_spt_oos(gvt);
if (ret) {
gvt_err("fail to initialize SPT oos\n");
+ dma_unmap_page(dev, daddr, 4096, PCI_DMA_BIDIRECTIONAL);
+ __free_page(gvt->gtt.scratch_ggtt_page);
return ret;
}
}
diff --git a/drivers/gpu/drm/i915/gvt/handlers.c b/drivers/gpu/drm/i915/gvt/handlers.c
index 1414d7e..17febe8 100644
--- a/drivers/gpu/drm/i915/gvt/handlers.c
+++ b/drivers/gpu/drm/i915/gvt/handlers.c
@@ -367,21 +367,24 @@
static int dpy_reg_mmio_read(struct intel_vgpu *vgpu, unsigned int offset,
void *p_data, unsigned int bytes)
{
- *(u32 *)p_data = (1 << 17);
- return 0;
-}
+ switch (offset) {
+ case 0xe651c:
+ case 0xe661c:
+ case 0xe671c:
+ case 0xe681c:
+ vgpu_vreg(vgpu, offset) = 1 << 17;
+ break;
+ case 0xe6c04:
+ vgpu_vreg(vgpu, offset) = 0x3;
+ break;
+ case 0xe6e1c:
+ vgpu_vreg(vgpu, offset) = 0x2f << 16;
+ break;
+ default:
+ return -EINVAL;
+ }
-static int dpy_reg_mmio_read_2(struct intel_vgpu *vgpu, unsigned int offset,
- void *p_data, unsigned int bytes)
-{
- *(u32 *)p_data = 3;
- return 0;
-}
-
-static int dpy_reg_mmio_read_3(struct intel_vgpu *vgpu, unsigned int offset,
- void *p_data, unsigned int bytes)
-{
- *(u32 *)p_data = (0x2f << 16);
+ read_vreg(vgpu, offset, p_data, bytes);
return 0;
}
@@ -1925,7 +1928,7 @@
MMIO_F(_PCH_DPD_AUX_CH_CTL, 6 * 4, 0, 0, 0, D_PRE_SKL, NULL,
dp_aux_ch_ctl_mmio_write);
- MMIO_RO(PCH_ADPA, D_ALL, 0, ADPA_CRT_HOTPLUG_MONITOR_MASK, NULL, pch_adpa_mmio_write);
+ MMIO_DH(PCH_ADPA, D_PRE_SKL, NULL, pch_adpa_mmio_write);
MMIO_DH(_PCH_TRANSACONF, D_ALL, NULL, transconf_mmio_write);
MMIO_DH(_PCH_TRANSBCONF, D_ALL, NULL, transconf_mmio_write);
@@ -2011,8 +2014,8 @@
MMIO_DH(0xe661c, D_ALL, dpy_reg_mmio_read, NULL);
MMIO_DH(0xe671c, D_ALL, dpy_reg_mmio_read, NULL);
MMIO_DH(0xe681c, D_ALL, dpy_reg_mmio_read, NULL);
- MMIO_DH(0xe6c04, D_ALL, dpy_reg_mmio_read_2, NULL);
- MMIO_DH(0xe6e1c, D_ALL, dpy_reg_mmio_read_3, NULL);
+ MMIO_DH(0xe6c04, D_ALL, dpy_reg_mmio_read, NULL);
+ MMIO_DH(0xe6e1c, D_ALL, dpy_reg_mmio_read, NULL);
MMIO_RO(PCH_PORT_HOTPLUG, D_ALL, 0,
PORTA_HOTPLUG_STATUS_MASK
diff --git a/drivers/gpu/drm/i915/gvt/kvmgt.c b/drivers/gpu/drm/i915/gvt/kvmgt.c
index 1ae0b40..fd0c85f 100644
--- a/drivers/gpu/drm/i915/gvt/kvmgt.c
+++ b/drivers/gpu/drm/i915/gvt/kvmgt.c
@@ -232,16 +232,20 @@
struct device *dev = mdev_dev(vgpu->vdev.mdev);
unsigned long gfn;
- mutex_lock(&vgpu->vdev.cache_lock);
- while ((node = rb_first(&vgpu->vdev.cache))) {
+ for (;;) {
+ mutex_lock(&vgpu->vdev.cache_lock);
+ node = rb_first(&vgpu->vdev.cache);
+ if (!node) {
+ mutex_unlock(&vgpu->vdev.cache_lock);
+ break;
+ }
dma = rb_entry(node, struct gvt_dma, node);
gvt_dma_unmap_iova(vgpu, dma->iova);
gfn = dma->gfn;
-
- vfio_unpin_pages(dev, &gfn, 1);
__gvt_cache_remove_entry(vgpu, dma);
+ mutex_unlock(&vgpu->vdev.cache_lock);
+ vfio_unpin_pages(dev, &gfn, 1);
}
- mutex_unlock(&vgpu->vdev.cache_lock);
}
static struct intel_vgpu_type *intel_gvt_find_vgpu_type(struct intel_gvt *gvt,
diff --git a/drivers/gpu/drm/i915/gvt/scheduler.c b/drivers/gpu/drm/i915/gvt/scheduler.c
index 488fdea..4f7057d 100644
--- a/drivers/gpu/drm/i915/gvt/scheduler.c
+++ b/drivers/gpu/drm/i915/gvt/scheduler.c
@@ -174,15 +174,6 @@
atomic_set(&workload->shadow_ctx_active, 1);
break;
case INTEL_CONTEXT_SCHEDULE_OUT:
- /* If the status is -EINPROGRESS means this workload
- * doesn't meet any issue during dispatching so when
- * get the SCHEDULE_OUT set the status to be zero for
- * good. If the status is NOT -EINPROGRESS means there
- * is something wrong happened during dispatching and
- * the status should not be set to zero
- */
- if (workload->status == -EINPROGRESS)
- workload->status = 0;
atomic_set(&workload->shadow_ctx_active, 0);
break;
default:
@@ -427,6 +418,18 @@
wait_event(workload->shadow_ctx_status_wq,
!atomic_read(&workload->shadow_ctx_active));
+ /* If this request caused GPU hang, req->fence.error will
+ * be set to -EIO. Use -EIO to set workload status so
+ * that when this request caused GPU hang, didn't trigger
+ * context switch interrupt to guest.
+ */
+ if (likely(workload->status == -EINPROGRESS)) {
+ if (workload->req->fence.error == -EIO)
+ workload->status = -EIO;
+ else
+ workload->status = 0;
+ }
+
i915_gem_request_put(fetch_and_zero(&workload->req));
if (!workload->status && !vgpu->resetting) {
@@ -464,8 +467,6 @@
int ring_id;
};
-static DEFINE_MUTEX(scheduler_mutex);
-
static int workload_thread(void *priv)
{
struct workload_thread_param *p = (struct workload_thread_param *)priv;
@@ -497,8 +498,6 @@
if (!workload)
break;
- mutex_lock(&scheduler_mutex);
-
gvt_dbg_sched("ring id %d next workload %p vgpu %d\n",
workload->ring_id, workload,
workload->vgpu->id);
@@ -537,9 +536,6 @@
FORCEWAKE_ALL);
intel_runtime_pm_put(gvt->dev_priv);
-
- mutex_unlock(&scheduler_mutex);
-
}
return 0;
}
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 3f44076..00d8967 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -3087,7 +3087,7 @@
connector->display_info.cea_rev);
}
- if (!intel_encoder || intel_encoder->type == INTEL_OUTPUT_DP_MST)
+ if (!intel_encoder)
return;
switch (connector->connector_type) {
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index ee2325b..fc307e03 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -1132,10 +1132,12 @@
* and the registers being closely associated.
*
* According to chipset errata, on the 965GM, MSI interrupts may
- * be lost or delayed, but we use them anyways to avoid
- * stuck interrupts on some machines.
+ * be lost or delayed, and was defeatured. MSI interrupts seem to
+ * get lost on g4x as well, and interrupt delivery seems to stay
+ * properly dead afterwards. So we'll just disable them for all
+ * pre-gen5 chipsets.
*/
- if (!IS_I945G(dev_priv) && !IS_I945GM(dev_priv)) {
+ if (INTEL_GEN(dev_priv) >= 5) {
if (pci_enable_msi(pdev) < 0)
DRM_DEBUG_DRIVER("can't enable MSI");
}
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 7dcac3b..969bac8 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -2434,8 +2434,9 @@
* again with !__GFP_NORETRY. However, we still
* want to fail this allocation rather than
* trigger the out-of-memory killer and for
- * this we want the future __GFP_MAYFAIL.
+ * this we want __GFP_RETRY_MAYFAIL.
*/
+ gfp |= __GFP_RETRY_MAYFAIL;
}
} while (1);
diff --git a/drivers/gpu/drm/i915/i915_gem_clflush.c b/drivers/gpu/drm/i915/i915_gem_clflush.c
index 152f16c..348b29a 100644
--- a/drivers/gpu/drm/i915/i915_gem_clflush.c
+++ b/drivers/gpu/drm/i915/i915_gem_clflush.c
@@ -114,7 +114,7 @@
return NOTIFY_DONE;
}
-void i915_gem_clflush_object(struct drm_i915_gem_object *obj,
+bool i915_gem_clflush_object(struct drm_i915_gem_object *obj,
unsigned int flags)
{
struct clflush *clflush;
@@ -128,7 +128,7 @@
*/
if (!i915_gem_object_has_struct_page(obj)) {
obj->cache_dirty = false;
- return;
+ return false;
}
/* If the GPU is snooping the contents of the CPU cache,
@@ -140,7 +140,7 @@
* tracking.
*/
if (!(flags & I915_CLFLUSH_FORCE) && obj->cache_coherent)
- return;
+ return false;
trace_i915_gem_object_clflush(obj);
@@ -179,4 +179,5 @@
}
obj->cache_dirty = false;
+ return true;
}
diff --git a/drivers/gpu/drm/i915/i915_gem_clflush.h b/drivers/gpu/drm/i915/i915_gem_clflush.h
index 2455a78..f390247 100644
--- a/drivers/gpu/drm/i915/i915_gem_clflush.h
+++ b/drivers/gpu/drm/i915/i915_gem_clflush.h
@@ -28,7 +28,7 @@
struct drm_i915_private;
struct drm_i915_gem_object;
-void i915_gem_clflush_object(struct drm_i915_gem_object *obj,
+bool i915_gem_clflush_object(struct drm_i915_gem_object *obj,
unsigned int flags);
#define I915_CLFLUSH_FORCE BIT(0)
#define I915_CLFLUSH_SYNC BIT(1)
diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
index 9337446..e9503f6 100644
--- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c
+++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
@@ -288,20 +288,26 @@
* direct lookup.
*/
do {
+ unsigned int flags;
+
+ /* While we can still reduce the allocation size, don't
+ * raise a warning and allow the allocation to fail.
+ * On the last pass though, we want to try as hard
+ * as possible to perform the allocation and warn
+ * if it fails.
+ */
+ flags = GFP_TEMPORARY;
+ if (size > 1)
+ flags |= __GFP_NORETRY | __GFP_NOWARN;
+
eb->buckets = kzalloc(sizeof(struct hlist_head) << size,
- GFP_TEMPORARY |
- __GFP_NORETRY |
- __GFP_NOWARN);
+ flags);
if (eb->buckets)
break;
} while (--size);
- if (unlikely(!eb->buckets)) {
- eb->buckets = kzalloc(sizeof(struct hlist_head),
- GFP_TEMPORARY);
- if (unlikely(!eb->buckets))
- return -ENOMEM;
- }
+ if (unlikely(!size))
+ return -ENOMEM;
eb->lut_size = size;
} else {
@@ -452,7 +458,7 @@
return err;
}
- if (eb->lut_size >= 0) {
+ if (eb->lut_size > 0) {
vma->exec_handle = entry->handle;
hlist_add_head(&vma->exec_node,
&eb->buckets[hash_32(entry->handle,
@@ -554,9 +560,6 @@
eb->args->flags |= __EXEC_HAS_RELOC;
}
- entry->flags |= __EXEC_OBJECT_HAS_PIN;
- GEM_BUG_ON(eb_vma_misplaced(entry, vma));
-
if (unlikely(entry->flags & EXEC_OBJECT_NEEDS_FENCE)) {
err = i915_vma_get_fence(vma);
if (unlikely(err)) {
@@ -568,6 +571,9 @@
entry->flags |= __EXEC_OBJECT_HAS_FENCE;
}
+ entry->flags |= __EXEC_OBJECT_HAS_PIN;
+ GEM_BUG_ON(eb_vma_misplaced(entry, vma));
+
return 0;
}
@@ -894,7 +900,7 @@
static void eb_reset_vmas(const struct i915_execbuffer *eb)
{
eb_release_vmas(eb);
- if (eb->lut_size >= 0)
+ if (eb->lut_size > 0)
memset(eb->buckets, 0,
sizeof(struct hlist_head) << eb->lut_size);
}
@@ -903,7 +909,7 @@
{
GEM_BUG_ON(eb->reloc_cache.rq);
- if (eb->lut_size >= 0)
+ if (eb->lut_size > 0)
kfree(eb->buckets);
}
@@ -1452,7 +1458,7 @@
* to read. However, if the array is not writable the user loses
* the updated relocation values.
*/
- if (unlikely(!access_ok(VERIFY_READ, urelocs, remain*sizeof(urelocs))))
+ if (unlikely(!access_ok(VERIFY_READ, urelocs, remain*sizeof(*urelocs))))
return -EFAULT;
do {
@@ -1769,7 +1775,7 @@
}
}
- return err ?: have_copy;
+ return err;
}
static int eb_relocate(struct i915_execbuffer *eb)
@@ -1819,7 +1825,7 @@
int err;
for (i = 0; i < count; i++) {
- const struct drm_i915_gem_exec_object2 *entry = &eb->exec[i];
+ struct drm_i915_gem_exec_object2 *entry = &eb->exec[i];
struct i915_vma *vma = exec_to_vma(entry);
struct drm_i915_gem_object *obj = vma->obj;
@@ -1835,12 +1841,14 @@
eb->request->capture_list = capture;
}
+ if (unlikely(obj->cache_dirty && !obj->cache_coherent)) {
+ if (i915_gem_clflush_object(obj, 0))
+ entry->flags &= ~EXEC_OBJECT_ASYNC;
+ }
+
if (entry->flags & EXEC_OBJECT_ASYNC)
goto skip_flushes;
- if (unlikely(obj->cache_dirty && !obj->cache_coherent))
- i915_gem_clflush_object(obj, 0);
-
err = i915_gem_request_await_object
(eb->request, obj, entry->flags & EXEC_OBJECT_WRITE);
if (err)
@@ -2180,8 +2188,11 @@
}
}
- if (eb_create(&eb))
- return -ENOMEM;
+ err = eb_create(&eb);
+ if (err)
+ goto err_out_fence;
+
+ GEM_BUG_ON(!eb.lut_size);
/*
* Take a local wakeref for preparing to dispatch the execbuf as
@@ -2200,7 +2211,7 @@
goto err_unlock;
err = eb_relocate(&eb);
- if (err)
+ if (err) {
/*
* If the user expects the execobject.offset and
* reloc.presumed_offset to be an exact match,
@@ -2209,8 +2220,8 @@
* relocation.
*/
args->flags &= ~__EXEC_HAS_RELOC;
- if (err < 0)
goto err_vma;
+ }
if (unlikely(eb.batch->exec_entry->flags & EXEC_OBJECT_WRITE)) {
DRM_DEBUG("Attempting to use self-modifying batch buffer\n");
@@ -2340,6 +2351,7 @@
err_rpm:
intel_runtime_pm_put(eb.i915);
eb_destroy(&eb);
+err_out_fence:
if (out_fence_fd != -1)
put_unused_fd(out_fence_fd);
err_in_fence:
diff --git a/drivers/gpu/drm/i915/i915_perf.c b/drivers/gpu/drm/i915/i915_perf.c
index 38c4440..9cd22f8 100644
--- a/drivers/gpu/drm/i915/i915_perf.c
+++ b/drivers/gpu/drm/i915/i915_perf.c
@@ -2067,10 +2067,6 @@
return ret;
}
- ret = alloc_oa_buffer(dev_priv);
- if (ret)
- goto err_oa_buf_alloc;
-
/* PRM - observability performance counters:
*
* OACONTROL, performance counter enable, note:
@@ -2086,6 +2082,10 @@
intel_runtime_pm_get(dev_priv);
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
+ ret = alloc_oa_buffer(dev_priv);
+ if (ret)
+ goto err_oa_buf_alloc;
+
ret = dev_priv->perf.oa.ops.enable_metric_set(dev_priv);
if (ret)
goto err_enable;
@@ -2097,11 +2097,11 @@
return 0;
err_enable:
- intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
- intel_runtime_pm_put(dev_priv);
free_oa_buffer(dev_priv);
err_oa_buf_alloc:
+ intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
+ intel_runtime_pm_put(dev_priv);
if (stream->ctx)
oa_put_render_ctx_id(stream);
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index c8647cf..64cc674 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1802,7 +1802,7 @@
#define POST_CURSOR_2(x) ((x) << 6)
#define POST_CURSOR_2_MASK (0x3F << 6)
#define CURSOR_COEFF(x) ((x) << 0)
-#define CURSOR_COEFF_MASK (0x3F << 6)
+#define CURSOR_COEFF_MASK (0x3F << 0)
#define _CNL_PORT_TX_DW5_GRP_AE 0x162354
#define _CNL_PORT_TX_DW5_GRP_B 0x1623D4
diff --git a/drivers/gpu/drm/i915/i915_vma.h b/drivers/gpu/drm/i915/i915_vma.h
index 4a673fc..20cf272 100644
--- a/drivers/gpu/drm/i915/i915_vma.h
+++ b/drivers/gpu/drm/i915/i915_vma.h
@@ -284,12 +284,12 @@
static inline void __i915_vma_unpin(struct i915_vma *vma)
{
- GEM_BUG_ON(!i915_vma_is_pinned(vma));
vma->flags--;
}
static inline void i915_vma_unpin(struct i915_vma *vma)
{
+ GEM_BUG_ON(!i915_vma_is_pinned(vma));
GEM_BUG_ON(!drm_mm_node_allocated(&vma->node));
__i915_vma_unpin(vma);
}
diff --git a/drivers/gpu/drm/i915/intel_cdclk.c b/drivers/gpu/drm/i915/intel_cdclk.c
index b8914db..1241e58 100644
--- a/drivers/gpu/drm/i915/intel_cdclk.c
+++ b/drivers/gpu/drm/i915/intel_cdclk.c
@@ -491,6 +491,14 @@
int cdclk = cdclk_state->cdclk;
u32 val, cmd;
+ /* There are cases where we can end up here with power domains
+ * off and a CDCLK frequency other than the minimum, like when
+ * issuing a modeset without actually changing any display after
+ * a system suspend. So grab the PIPE-A domain, which covers
+ * the HW blocks needed for the following programming.
+ */
+ intel_display_power_get(dev_priv, POWER_DOMAIN_PIPE_A);
+
if (cdclk >= 320000) /* jump to highest voltage for 400MHz too */
cmd = 2;
else if (cdclk == 266667)
@@ -549,6 +557,8 @@
intel_update_cdclk(dev_priv);
vlv_program_pfi_credits(dev_priv);
+
+ intel_display_power_put(dev_priv, POWER_DOMAIN_PIPE_A);
}
static void chv_set_cdclk(struct drm_i915_private *dev_priv,
@@ -568,6 +578,14 @@
return;
}
+ /* There are cases where we can end up here with power domains
+ * off and a CDCLK frequency other than the minimum, like when
+ * issuing a modeset without actually changing any display after
+ * a system suspend. So grab the PIPE-A domain, which covers
+ * the HW blocks needed for the following programming.
+ */
+ intel_display_power_get(dev_priv, POWER_DOMAIN_PIPE_A);
+
/*
* Specs are full of misinformation, but testing on actual
* hardware has shown that we just need to write the desired
@@ -590,6 +608,8 @@
intel_update_cdclk(dev_priv);
vlv_program_pfi_credits(dev_priv);
+
+ intel_display_power_put(dev_priv, POWER_DOMAIN_PIPE_A);
}
static int bdw_calc_cdclk(int max_pixclk)
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 80e96f1..9edeaae 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -1896,8 +1896,8 @@
val = I915_READ(CNL_PORT_TX_DW4_LN(port, ln));
val &= ~LOADGEN_SELECT;
- if (((rate < 600000) && (width == 4) && (ln >= 1)) ||
- ((rate < 600000) && (width < 4) && ((ln == 1) || (ln == 2)))) {
+ if ((rate <= 600000 && width == 4 && ln >= 1) ||
+ (rate <= 600000 && width < 4 && (ln == 1 || ln == 2))) {
val |= LOADGEN_SELECT;
}
I915_WRITE(CNL_PORT_TX_DW4_LN(port, ln), val);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index dec9e58..9471c88d 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3427,26 +3427,6 @@
intel_finish_page_flip_cs(dev_priv, crtc->pipe);
}
-static void intel_update_primary_planes(struct drm_device *dev)
-{
- struct drm_crtc *crtc;
-
- for_each_crtc(dev, crtc) {
- struct intel_plane *plane = to_intel_plane(crtc->primary);
- struct intel_plane_state *plane_state =
- to_intel_plane_state(plane->base.state);
-
- if (plane_state->base.visible) {
- trace_intel_update_plane(&plane->base,
- to_intel_crtc(crtc));
-
- plane->update_plane(plane,
- to_intel_crtc_state(crtc->state),
- plane_state);
- }
- }
-}
-
static int
__intel_display_resume(struct drm_device *dev,
struct drm_atomic_state *state,
@@ -3499,6 +3479,12 @@
struct drm_atomic_state *state;
int ret;
+
+ /* reset doesn't touch the display */
+ if (!i915.force_reset_modeset_test &&
+ !gpu_reset_clobbers_display(dev_priv))
+ return;
+
/*
* Need mode_config.mutex so that we don't
* trample ongoing ->detect() and whatnot.
@@ -3512,12 +3498,6 @@
drm_modeset_backoff(ctx);
}
-
- /* reset doesn't touch the display, but flips might get nuked anyway, */
- if (!i915.force_reset_modeset_test &&
- !gpu_reset_clobbers_display(dev_priv))
- return;
-
/*
* Disabling the crtcs gracefully seems nicer. Also the
* g33 docs say we should at least disable all the planes.
@@ -3547,6 +3527,14 @@
struct drm_atomic_state *state = dev_priv->modeset_restore_state;
int ret;
+ /* reset doesn't touch the display */
+ if (!i915.force_reset_modeset_test &&
+ !gpu_reset_clobbers_display(dev_priv))
+ return;
+
+ if (!state)
+ goto unlock;
+
/*
* Flips in the rings will be nuked by the reset,
* so complete all pending flips so that user space
@@ -3558,22 +3546,10 @@
/* reset doesn't touch the display */
if (!gpu_reset_clobbers_display(dev_priv)) {
- if (!state) {
- /*
- * Flips in the rings have been nuked by the reset,
- * so update the base address of all primary
- * planes to the the last fb to make sure we're
- * showing the correct fb after a reset.
- *
- * FIXME: Atomic will make this obsolete since we won't schedule
- * CS-based flips (which might get lost in gpu resets) any more.
- */
- intel_update_primary_planes(dev);
- } else {
- ret = __intel_display_resume(dev, state, ctx);
+ /* for testing only restore the display */
+ ret = __intel_display_resume(dev, state, ctx);
if (ret)
DRM_ERROR("Restoring old state failed with %i\n", ret);
- }
} else {
/*
* The display has been reset as well,
@@ -3597,8 +3573,8 @@
intel_hpd_init(dev_priv);
}
- if (state)
- drm_atomic_state_put(state);
+ drm_atomic_state_put(state);
+unlock:
drm_modeset_drop_locks(ctx);
drm_modeset_acquire_fini(ctx);
mutex_unlock(&dev->mode_config.mutex);
@@ -9117,6 +9093,13 @@
u64 power_domain_mask;
bool active;
+ if (INTEL_GEN(dev_priv) >= 9) {
+ intel_crtc_init_scalers(crtc, pipe_config);
+
+ pipe_config->scaler_state.scaler_id = -1;
+ pipe_config->scaler_state.scaler_users &= ~(1 << SKL_CRTC_INDEX);
+ }
+
power_domain = POWER_DOMAIN_PIPE(crtc->pipe);
if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
return false;
@@ -9145,13 +9128,6 @@
pipe_config->gamma_mode =
I915_READ(GAMMA_MODE(crtc->pipe)) & GAMMA_MODE_MODE_MASK;
- if (INTEL_GEN(dev_priv) >= 9) {
- intel_crtc_init_scalers(crtc, pipe_config);
-
- pipe_config->scaler_state.scaler_id = -1;
- pipe_config->scaler_state.scaler_users &= ~(1 << SKL_CRTC_INDEX);
- }
-
power_domain = POWER_DOMAIN_PIPE_PANEL_FITTER(crtc->pipe);
if (intel_display_power_get_if_enabled(dev_priv, power_domain)) {
power_domain_mask |= BIT_ULL(power_domain);
@@ -9540,7 +9516,16 @@
* On some platforms writing CURCNTR first will also
* cause CURPOS to be armed by the CURBASE write.
* Without the CURCNTR write the CURPOS write would
- * arm itself.
+ * arm itself. Thus we always start the full update
+ * with a CURCNTR write.
+ *
+ * On other platforms CURPOS always requires the
+ * CURBASE write to arm the update. Additonally
+ * a write to any of the cursor register will cancel
+ * an already armed cursor update. Thus leaving out
+ * the CURBASE write after CURPOS could lead to a
+ * cursor that doesn't appear to move, or even change
+ * shape. Thus we always write CURBASE.
*
* CURCNTR and CUR_FBC_CTL are always
* armed by the CURBASE write only.
@@ -9559,6 +9544,7 @@
plane->cursor.cntl = cntl;
} else {
I915_WRITE_FW(CURPOS(pipe), pos);
+ I915_WRITE_FW(CURBASE(pipe), base);
}
POSTING_READ_FW(CURBASE(pipe));
diff --git a/drivers/gpu/drm/i915/intel_engine_cs.c b/drivers/gpu/drm/i915/intel_engine_cs.c
index a4487c5..5b4de71 100644
--- a/drivers/gpu/drm/i915/intel_engine_cs.c
+++ b/drivers/gpu/drm/i915/intel_engine_cs.c
@@ -821,9 +821,10 @@
I915_WRITE(BDW_SCRATCH1, I915_READ(BDW_SCRATCH1) |
GEN9_LBS_SLA_RETRY_TIMER_DECREMENT_ENABLE);
- /* WaDisableKillLogic:bxt,skl,kbl,cfl */
- I915_WRITE(GAM_ECOCHK, I915_READ(GAM_ECOCHK) |
- ECOCHK_DIS_TLB);
+ /* WaDisableKillLogic:bxt,skl,kbl */
+ if (!IS_COFFEELAKE(dev_priv))
+ I915_WRITE(GAM_ECOCHK, I915_READ(GAM_ECOCHK) |
+ ECOCHK_DIS_TLB);
/* WaClearFlowControlGpgpuContextSave:skl,bxt,kbl,glk,cfl */
/* WaDisablePartialInstShootdown:skl,bxt,kbl,glk,cfl */
@@ -894,10 +895,9 @@
WA_SET_BIT_MASKED(HDC_CHICKEN0,
HDC_FORCE_NON_COHERENT);
- /* WaDisableHDCInvalidation:skl,bxt,kbl */
- if (!IS_COFFEELAKE(dev_priv))
- I915_WRITE(GAM_ECOCHK, I915_READ(GAM_ECOCHK) |
- BDW_DISABLE_HDC_INVALIDATION);
+ /* WaDisableHDCInvalidation:skl,bxt,kbl,cfl */
+ I915_WRITE(GAM_ECOCHK, I915_READ(GAM_ECOCHK) |
+ BDW_DISABLE_HDC_INVALIDATION);
/* WaDisableSamplerPowerBypassForSOPingPong:skl,bxt,kbl,cfl */
if (IS_SKYLAKE(dev_priv) ||
diff --git a/drivers/gpu/drm/i915/intel_fbdev.c b/drivers/gpu/drm/i915/intel_fbdev.c
index 03347c6..0c4cde6 100644
--- a/drivers/gpu/drm/i915/intel_fbdev.c
+++ b/drivers/gpu/drm/i915/intel_fbdev.c
@@ -535,14 +535,15 @@
drm_fb_helper_fini(&ifbdev->helper);
- if (ifbdev->fb) {
+ if (ifbdev->vma) {
mutex_lock(&ifbdev->helper.dev->struct_mutex);
intel_unpin_fb_vma(ifbdev->vma);
mutex_unlock(&ifbdev->helper.dev->struct_mutex);
-
- drm_framebuffer_remove(&ifbdev->fb->base);
}
+ if (ifbdev->fb)
+ drm_framebuffer_remove(&ifbdev->fb->base);
+
kfree(ifbdev);
}
@@ -765,7 +766,7 @@
struct intel_fbdev *ifbdev = dev_priv->fbdev;
struct fb_info *info;
- if (!ifbdev || !ifbdev->fb)
+ if (!ifbdev || !ifbdev->vma)
return;
info = ifbdev->helper.fbdev;
@@ -812,7 +813,7 @@
{
struct intel_fbdev *ifbdev = to_i915(dev)->fbdev;
- if (ifbdev && ifbdev->fb)
+ if (ifbdev && ifbdev->vma)
drm_fb_helper_hotplug_event(&ifbdev->helper);
}
@@ -824,7 +825,7 @@
return;
intel_fbdev_sync(ifbdev);
- if (!ifbdev->fb)
+ if (!ifbdev->vma)
return;
if (drm_fb_helper_restore_fbdev_mode_unlocked(&ifbdev->helper) == 0)
diff --git a/drivers/gpu/drm/i915/intel_gvt.c b/drivers/gpu/drm/i915/intel_gvt.c
index 52d5b82..c17ed0e 100644
--- a/drivers/gpu/drm/i915/intel_gvt.c
+++ b/drivers/gpu/drm/i915/intel_gvt.c
@@ -45,7 +45,7 @@
return true;
if (IS_SKYLAKE(dev_priv))
return true;
- if (IS_KABYLAKE(dev_priv) && INTEL_DEVID(dev_priv) == 0x591D)
+ if (IS_KABYLAKE(dev_priv))
return true;
return false;
}
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 48ea0fc..40b224b 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -4463,8 +4463,8 @@
if ((cpp * cstate->base.adjusted_mode.crtc_htotal / 512 < 1) &&
(plane_bytes_per_line / 512 < 1))
selected_result = method2;
- else if ((ddb_allocation && ddb_allocation /
- fixed_16_16_to_u32_round_up(plane_blocks_per_line)) >= 1)
+ else if (ddb_allocation >=
+ fixed_16_16_to_u32_round_up(plane_blocks_per_line))
selected_result = min_fixed_16_16(method1, method2);
else if (latency >= linetime_us)
selected_result = min_fixed_16_16(method1, method2);
diff --git a/drivers/gpu/drm/i915/selftests/i915_gem_dmabuf.c b/drivers/gpu/drm/i915/selftests/i915_gem_dmabuf.c
index d15cc9d..89dc25a 100644
--- a/drivers/gpu/drm/i915/selftests/i915_gem_dmabuf.c
+++ b/drivers/gpu/drm/i915/selftests/i915_gem_dmabuf.c
@@ -246,9 +246,9 @@
i915_gem_object_put(obj);
ptr = dma_buf_vmap(dmabuf);
- if (IS_ERR(ptr)) {
- err = PTR_ERR(ptr);
- pr_err("dma_buf_vmap failed with err=%d\n", err);
+ if (!ptr) {
+ pr_err("dma_buf_vmap failed\n");
+ err = -ENOMEM;
goto out;
}
diff --git a/drivers/gpu/drm/i915/selftests/mock_gem_device.c b/drivers/gpu/drm/i915/selftests/mock_gem_device.c
index 627e2aa..8cdec45 100644
--- a/drivers/gpu/drm/i915/selftests/mock_gem_device.c
+++ b/drivers/gpu/drm/i915/selftests/mock_gem_device.c
@@ -206,7 +206,7 @@
mkwrite_device_info(i915)->ring_mask = BIT(0);
i915->engine[RCS] = mock_engine(i915, "mock");
if (!i915->engine[RCS])
- goto err_dependencies;
+ goto err_priorities;
i915->kernel_context = mock_context(i915, NULL);
if (!i915->kernel_context)
diff --git a/drivers/gpu/drm/imx/ipuv3-plane.c b/drivers/gpu/drm/imx/ipuv3-plane.c
index 4954622..6276bb8 100644
--- a/drivers/gpu/drm/imx/ipuv3-plane.c
+++ b/drivers/gpu/drm/imx/ipuv3-plane.c
@@ -54,7 +54,7 @@
DRM_FORMAT_RGBA8888,
DRM_FORMAT_RGBX8888,
DRM_FORMAT_BGRA8888,
- DRM_FORMAT_BGRA8888,
+ DRM_FORMAT_BGRX8888,
DRM_FORMAT_UYVY,
DRM_FORMAT_VYUY,
DRM_FORMAT_YUYV,
diff --git a/drivers/gpu/drm/imx/parallel-display.c b/drivers/gpu/drm/imx/parallel-display.c
index 636031a..8aca202 100644
--- a/drivers/gpu/drm/imx/parallel-display.c
+++ b/drivers/gpu/drm/imx/parallel-display.c
@@ -237,7 +237,7 @@
/* port@1 is the output port */
ret = drm_of_find_panel_or_bridge(np, 1, 0, &imxpd->panel, &imxpd->bridge);
- if (ret)
+ if (ret && ret != -ENODEV)
return ret;
imxpd->dev = dev;
diff --git a/drivers/gpu/drm/mediatek/Makefile b/drivers/gpu/drm/mediatek/Makefile
index bf2e5be..e37b55a 100644
--- a/drivers/gpu/drm/mediatek/Makefile
+++ b/drivers/gpu/drm/mediatek/Makefile
@@ -1,4 +1,5 @@
-mediatek-drm-y := mtk_disp_ovl.o \
+mediatek-drm-y := mtk_disp_color.o \
+ mtk_disp_ovl.o \
mtk_disp_rdma.o \
mtk_drm_crtc.o \
mtk_drm_ddp.o \
diff --git a/drivers/gpu/drm/mediatek/mtk_disp_color.c b/drivers/gpu/drm/mediatek/mtk_disp_color.c
new file mode 100644
index 0000000..ef79a6d
--- /dev/null
+++ b/drivers/gpu/drm/mediatek/mtk_disp_color.c
@@ -0,0 +1,176 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <drm/drmP.h>
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+
+#include "mtk_drm_crtc.h"
+#include "mtk_drm_ddp_comp.h"
+
+#define DISP_COLOR_CFG_MAIN 0x0400
+#define DISP_COLOR_START_MT2701 0x0f00
+#define DISP_COLOR_START_MT8173 0x0c00
+#define DISP_COLOR_START(comp) ((comp)->data->color_offset)
+#define DISP_COLOR_WIDTH(comp) (DISP_COLOR_START(comp) + 0x50)
+#define DISP_COLOR_HEIGHT(comp) (DISP_COLOR_START(comp) + 0x54)
+
+#define COLOR_BYPASS_ALL BIT(7)
+#define COLOR_SEQ_SEL BIT(13)
+
+struct mtk_disp_color_data {
+ unsigned int color_offset;
+};
+
+/**
+ * struct mtk_disp_color - DISP_COLOR driver structure
+ * @ddp_comp - structure containing type enum and hardware resources
+ * @crtc - associated crtc to report irq events to
+ */
+struct mtk_disp_color {
+ struct mtk_ddp_comp ddp_comp;
+ struct drm_crtc *crtc;
+ const struct mtk_disp_color_data *data;
+};
+
+static inline struct mtk_disp_color *comp_to_color(struct mtk_ddp_comp *comp)
+{
+ return container_of(comp, struct mtk_disp_color, ddp_comp);
+}
+
+static void mtk_color_config(struct mtk_ddp_comp *comp, unsigned int w,
+ unsigned int h, unsigned int vrefresh,
+ unsigned int bpc)
+{
+ struct mtk_disp_color *color = comp_to_color(comp);
+
+ writel(w, comp->regs + DISP_COLOR_WIDTH(color));
+ writel(h, comp->regs + DISP_COLOR_HEIGHT(color));
+}
+
+static void mtk_color_start(struct mtk_ddp_comp *comp)
+{
+ struct mtk_disp_color *color = comp_to_color(comp);
+
+ writel(COLOR_BYPASS_ALL | COLOR_SEQ_SEL,
+ comp->regs + DISP_COLOR_CFG_MAIN);
+ writel(0x1, comp->regs + DISP_COLOR_START(color));
+}
+
+static const struct mtk_ddp_comp_funcs mtk_disp_color_funcs = {
+ .config = mtk_color_config,
+ .start = mtk_color_start,
+};
+
+static int mtk_disp_color_bind(struct device *dev, struct device *master,
+ void *data)
+{
+ struct mtk_disp_color *priv = dev_get_drvdata(dev);
+ struct drm_device *drm_dev = data;
+ int ret;
+
+ ret = mtk_ddp_comp_register(drm_dev, &priv->ddp_comp);
+ if (ret < 0) {
+ dev_err(dev, "Failed to register component %s: %d\n",
+ dev->of_node->full_name, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void mtk_disp_color_unbind(struct device *dev, struct device *master,
+ void *data)
+{
+ struct mtk_disp_color *priv = dev_get_drvdata(dev);
+ struct drm_device *drm_dev = data;
+
+ mtk_ddp_comp_unregister(drm_dev, &priv->ddp_comp);
+}
+
+static const struct component_ops mtk_disp_color_component_ops = {
+ .bind = mtk_disp_color_bind,
+ .unbind = mtk_disp_color_unbind,
+};
+
+static int mtk_disp_color_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct mtk_disp_color *priv;
+ int comp_id;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ comp_id = mtk_ddp_comp_get_id(dev->of_node, MTK_DISP_COLOR);
+ if (comp_id < 0) {
+ dev_err(dev, "Failed to identify by alias: %d\n", comp_id);
+ return comp_id;
+ }
+
+ ret = mtk_ddp_comp_init(dev, dev->of_node, &priv->ddp_comp, comp_id,
+ &mtk_disp_color_funcs);
+ if (ret) {
+ dev_err(dev, "Failed to initialize component: %d\n", ret);
+ return ret;
+ }
+
+ priv->data = of_device_get_match_data(dev);
+
+ platform_set_drvdata(pdev, priv);
+
+ ret = component_add(dev, &mtk_disp_color_component_ops);
+ if (ret)
+ dev_err(dev, "Failed to add component: %d\n", ret);
+
+ return ret;
+}
+
+static int mtk_disp_color_remove(struct platform_device *pdev)
+{
+ component_del(&pdev->dev, &mtk_disp_color_component_ops);
+
+ return 0;
+}
+
+static const struct mtk_disp_color_data mt2701_color_driver_data = {
+ .color_offset = DISP_COLOR_START_MT2701,
+};
+
+static const struct mtk_disp_color_data mt8173_color_driver_data = {
+ .color_offset = DISP_COLOR_START_MT8173,
+};
+
+static const struct of_device_id mtk_disp_color_driver_dt_match[] = {
+ { .compatible = "mediatek,mt2701-disp-color",
+ .data = &mt2701_color_driver_data},
+ { .compatible = "mediatek,mt8173-disp-color",
+ .data = &mt8173_color_driver_data},
+ {},
+};
+MODULE_DEVICE_TABLE(of, mtk_disp_color_driver_dt_match);
+
+struct platform_driver mtk_disp_color_driver = {
+ .probe = mtk_disp_color_probe,
+ .remove = mtk_disp_color_remove,
+ .driver = {
+ .name = "mediatek-disp-color",
+ .owner = THIS_MODULE,
+ .of_match_table = mtk_disp_color_driver_dt_match,
+ },
+};
diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
index a14d7d6..35bc5ba 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
@@ -42,9 +42,12 @@
#define OVL_RDMA_MEM_GMC 0x40402020
#define OVL_CON_BYTE_SWAP BIT(24)
+#define OVL_CON_MTX_YUV_TO_RGB (6 << 16)
#define OVL_CON_CLRFMT_RGB (1 << 12)
#define OVL_CON_CLRFMT_RGBA8888 (2 << 12)
#define OVL_CON_CLRFMT_ARGB8888 (3 << 12)
+#define OVL_CON_CLRFMT_UYVY (4 << 12)
+#define OVL_CON_CLRFMT_YUYV (5 << 12)
#define OVL_CON_CLRFMT_RGB565(ovl) ((ovl)->data->fmt_rgb565_is_0 ? \
0 : OVL_CON_CLRFMT_RGB)
#define OVL_CON_CLRFMT_RGB888(ovl) ((ovl)->data->fmt_rgb565_is_0 ? \
@@ -176,6 +179,10 @@
case DRM_FORMAT_XBGR8888:
case DRM_FORMAT_ABGR8888:
return OVL_CON_CLRFMT_RGBA8888 | OVL_CON_BYTE_SWAP;
+ case DRM_FORMAT_UYVY:
+ return OVL_CON_CLRFMT_UYVY | OVL_CON_MTX_YUV_TO_RGB;
+ case DRM_FORMAT_YUYV:
+ return OVL_CON_CLRFMT_YUYV | OVL_CON_MTX_YUV_TO_RGB;
}
}
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index 6582e1f..cb32c93 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -559,6 +559,8 @@
mtk_crtc->ddp_comp = devm_kmalloc_array(dev, mtk_crtc->ddp_comp_nr,
sizeof(*mtk_crtc->ddp_comp),
GFP_KERNEL);
+ if (!mtk_crtc->ddp_comp)
+ return -ENOMEM;
mtk_crtc->mutex = mtk_disp_mutex_get(priv->mutex_dev, pipe);
if (IS_ERR(mtk_crtc->mutex)) {
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
index 8b52416..07d7ea2 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
@@ -38,13 +38,6 @@
#define DISP_REG_UFO_START 0x0000
-#define DISP_COLOR_CFG_MAIN 0x0400
-#define DISP_COLOR_START_MT2701 0x0f00
-#define DISP_COLOR_START_MT8173 0x0c00
-#define DISP_COLOR_START(comp) ((comp)->data->color_offset)
-#define DISP_COLOR_WIDTH(comp) (DISP_COLOR_START(comp) + 0x50)
-#define DISP_COLOR_HEIGHT(comp) (DISP_COLOR_START(comp) + 0x54)
-
#define DISP_AAL_EN 0x0000
#define DISP_AAL_SIZE 0x0030
@@ -55,9 +48,6 @@
#define LUT_10BIT_MASK 0x03ff
-#define COLOR_BYPASS_ALL BIT(7)
-#define COLOR_SEQ_SEL BIT(13)
-
#define OD_RELAYMODE BIT(0)
#define UFO_BYPASS BIT(2)
@@ -82,20 +72,6 @@
#define DITHER_ADD_LSHIFT_G(x) (((x) & 0x7) << 4)
#define DITHER_ADD_RSHIFT_G(x) (((x) & 0x7) << 0)
-struct mtk_disp_color_data {
- unsigned int color_offset;
-};
-
-struct mtk_disp_color {
- struct mtk_ddp_comp ddp_comp;
- const struct mtk_disp_color_data *data;
-};
-
-static inline struct mtk_disp_color *comp_to_color(struct mtk_ddp_comp *comp)
-{
- return container_of(comp, struct mtk_disp_color, ddp_comp);
-}
-
void mtk_dither_set(struct mtk_ddp_comp *comp, unsigned int bpc,
unsigned int CFG)
{
@@ -119,25 +95,6 @@
}
}
-static void mtk_color_config(struct mtk_ddp_comp *comp, unsigned int w,
- unsigned int h, unsigned int vrefresh,
- unsigned int bpc)
-{
- struct mtk_disp_color *color = comp_to_color(comp);
-
- writel(w, comp->regs + DISP_COLOR_WIDTH(color));
- writel(h, comp->regs + DISP_COLOR_HEIGHT(color));
-}
-
-static void mtk_color_start(struct mtk_ddp_comp *comp)
-{
- struct mtk_disp_color *color = comp_to_color(comp);
-
- writel(COLOR_BYPASS_ALL | COLOR_SEQ_SEL,
- comp->regs + DISP_COLOR_CFG_MAIN);
- writel(0x1, comp->regs + DISP_COLOR_START(color));
-}
-
static void mtk_od_config(struct mtk_ddp_comp *comp, unsigned int w,
unsigned int h, unsigned int vrefresh,
unsigned int bpc)
@@ -229,11 +186,6 @@
.stop = mtk_gamma_stop,
};
-static const struct mtk_ddp_comp_funcs ddp_color = {
- .config = mtk_color_config,
- .start = mtk_color_start,
-};
-
static const struct mtk_ddp_comp_funcs ddp_od = {
.config = mtk_od_config,
.start = mtk_od_start,
@@ -268,8 +220,8 @@
static const struct mtk_ddp_comp_match mtk_ddp_matches[DDP_COMPONENT_ID_MAX] = {
[DDP_COMPONENT_AAL] = { MTK_DISP_AAL, 0, &ddp_aal },
[DDP_COMPONENT_BLS] = { MTK_DISP_BLS, 0, NULL },
- [DDP_COMPONENT_COLOR0] = { MTK_DISP_COLOR, 0, &ddp_color },
- [DDP_COMPONENT_COLOR1] = { MTK_DISP_COLOR, 1, &ddp_color },
+ [DDP_COMPONENT_COLOR0] = { MTK_DISP_COLOR, 0, NULL },
+ [DDP_COMPONENT_COLOR1] = { MTK_DISP_COLOR, 1, NULL },
[DDP_COMPONENT_DPI0] = { MTK_DPI, 0, NULL },
[DDP_COMPONENT_DSI0] = { MTK_DSI, 0, NULL },
[DDP_COMPONENT_DSI1] = { MTK_DSI, 1, NULL },
@@ -286,22 +238,6 @@
[DDP_COMPONENT_WDMA1] = { MTK_DISP_WDMA, 1, NULL },
};
-static const struct mtk_disp_color_data mt2701_color_driver_data = {
- .color_offset = DISP_COLOR_START_MT2701,
-};
-
-static const struct mtk_disp_color_data mt8173_color_driver_data = {
- .color_offset = DISP_COLOR_START_MT8173,
-};
-
-static const struct of_device_id mtk_disp_color_driver_dt_match[] = {
- { .compatible = "mediatek,mt2701-disp-color",
- .data = &mt2701_color_driver_data},
- { .compatible = "mediatek,mt8173-disp-color",
- .data = &mt8173_color_driver_data},
- {},
-};
-
int mtk_ddp_comp_get_id(struct device_node *node,
enum mtk_ddp_comp_type comp_type)
{
@@ -324,23 +260,11 @@
enum mtk_ddp_comp_type type;
struct device_node *larb_node;
struct platform_device *larb_pdev;
- const struct of_device_id *match;
- struct mtk_disp_color *color;
if (comp_id < 0 || comp_id >= DDP_COMPONENT_ID_MAX)
return -EINVAL;
type = mtk_ddp_matches[comp_id].type;
- if (type == MTK_DISP_COLOR) {
- devm_kfree(dev, comp);
- color = devm_kzalloc(dev, sizeof(*color), GFP_KERNEL);
- if (!color)
- return -ENOMEM;
-
- match = of_match_node(mtk_disp_color_driver_dt_match, node);
- color->data = match->data;
- comp = &color->ddp_comp;
- }
comp->id = comp_id;
comp->funcs = funcs ?: mtk_ddp_matches[comp_id].funcs;
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
index f6c8ec4..41d2cff 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
@@ -439,11 +439,12 @@
private->comp_node[comp_id] = of_node_get(node);
/*
- * Currently only the OVL, RDMA, DSI, and DPI blocks have
+ * Currently only the COLOR, OVL, RDMA, DSI, and DPI blocks have
* separate component platform drivers and initialize their own
* DDP component structure. The others are initialized here.
*/
- if (comp_type == MTK_DISP_OVL ||
+ if (comp_type == MTK_DISP_COLOR ||
+ comp_type == MTK_DISP_OVL ||
comp_type == MTK_DISP_RDMA ||
comp_type == MTK_DSI ||
comp_type == MTK_DPI) {
@@ -566,6 +567,7 @@
static struct platform_driver * const mtk_drm_drivers[] = {
&mtk_ddp_driver,
+ &mtk_disp_color_driver,
&mtk_disp_ovl_driver,
&mtk_disp_rdma_driver,
&mtk_dpi_driver,
@@ -576,33 +578,14 @@
static int __init mtk_drm_init(void)
{
- int ret;
- int i;
-
- for (i = 0; i < ARRAY_SIZE(mtk_drm_drivers); i++) {
- ret = platform_driver_register(mtk_drm_drivers[i]);
- if (ret < 0) {
- pr_err("Failed to register %s driver: %d\n",
- mtk_drm_drivers[i]->driver.name, ret);
- goto err;
- }
- }
-
- return 0;
-
-err:
- while (--i >= 0)
- platform_driver_unregister(mtk_drm_drivers[i]);
-
- return ret;
+ return platform_register_drivers(mtk_drm_drivers,
+ ARRAY_SIZE(mtk_drm_drivers));
}
static void __exit mtk_drm_exit(void)
{
- int i;
-
- for (i = ARRAY_SIZE(mtk_drm_drivers) - 1; i >= 0; i--)
- platform_driver_unregister(mtk_drm_drivers[i]);
+ platform_unregister_drivers(mtk_drm_drivers,
+ ARRAY_SIZE(mtk_drm_drivers));
}
module_init(mtk_drm_init);
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.h b/drivers/gpu/drm/mediatek/mtk_drm_drv.h
index aef8747..c3378c4 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.h
@@ -59,6 +59,7 @@
};
extern struct platform_driver mtk_ddp_driver;
+extern struct platform_driver mtk_disp_color_driver;
extern struct platform_driver mtk_disp_ovl_driver;
extern struct platform_driver mtk_disp_rdma_driver;
extern struct platform_driver mtk_dpi_driver;
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_plane.c b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
index e405e89..1a59b9a 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_plane.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
@@ -28,6 +28,8 @@
DRM_FORMAT_XRGB8888,
DRM_FORMAT_ARGB8888,
DRM_FORMAT_RGB565,
+ DRM_FORMAT_UYVY,
+ DRM_FORMAT_YUYV,
};
static void mtk_plane_reset(struct drm_plane *plane)
diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index b5cc6e1..97253c8 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -930,7 +930,7 @@
DRM_INFO("type is 0x02, try again\n");
break;
default:
- DRM_INFO("type(0x%x) cannot be non-recognite\n", type);
+ DRM_INFO("type(0x%x) not recognized\n", type);
break;
}
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi.c b/drivers/gpu/drm/mediatek/mtk_hdmi.c
index 0a4ffd7..71eb4fb 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi.c
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi.c
@@ -1778,33 +1778,14 @@
static int __init mtk_hdmitx_init(void)
{
- int ret;
- int i;
-
- for (i = 0; i < ARRAY_SIZE(mtk_hdmi_drivers); i++) {
- ret = platform_driver_register(mtk_hdmi_drivers[i]);
- if (ret < 0) {
- pr_err("Failed to register %s driver: %d\n",
- mtk_hdmi_drivers[i]->driver.name, ret);
- goto err;
- }
- }
-
- return 0;
-
-err:
- while (--i >= 0)
- platform_driver_unregister(mtk_hdmi_drivers[i]);
-
- return ret;
+ return platform_register_drivers(mtk_hdmi_drivers,
+ ARRAY_SIZE(mtk_hdmi_drivers));
}
static void __exit mtk_hdmitx_exit(void)
{
- int i;
-
- for (i = ARRAY_SIZE(mtk_hdmi_drivers) - 1; i >= 0; i--)
- platform_driver_unregister(mtk_hdmi_drivers[i]);
+ platform_unregister_drivers(mtk_hdmi_drivers,
+ ARRAY_SIZE(mtk_hdmi_drivers));
}
module_init(mtk_hdmitx_init);
diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c
index 147b221..dab78c6 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.c
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
@@ -1158,8 +1158,6 @@
return -ENODEV;
if (WARN_ON(msg->size > 16))
return -E2BIG;
- if (msg->size == 0)
- return msg->size;
ret = nvkm_i2c_aux_acquire(aux);
if (ret)
diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c
index 8d1df56..f362c9f 100644
--- a/drivers/gpu/drm/nouveau/nouveau_display.c
+++ b/drivers/gpu/drm/nouveau/nouveau_display.c
@@ -409,7 +409,6 @@
struct nouveau_display *disp = nouveau_display(dev);
struct nouveau_drm *drm = nouveau_drm(dev);
struct drm_connector *connector;
- struct drm_crtc *crtc;
if (!suspend) {
if (drm_drv_uses_atomic_modeset(dev))
@@ -418,10 +417,6 @@
drm_crtc_force_disable_all(dev);
}
- /* Make sure that drm and hw vblank irqs get properly disabled. */
- drm_for_each_crtc(crtc, dev)
- drm_crtc_vblank_off(crtc);
-
/* disable flip completion events */
nvif_notify_put(&drm->flip);
diff --git a/drivers/gpu/drm/nouveau/nv50_display.c b/drivers/gpu/drm/nouveau/nv50_display.c
index e3132a2..2bc0dc9 100644
--- a/drivers/gpu/drm/nouveau/nv50_display.c
+++ b/drivers/gpu/drm/nouveau/nv50_display.c
@@ -3674,15 +3674,24 @@
drm_mode_connector_attach_encoder(connector, encoder);
if (dcbe->type == DCB_OUTPUT_DP) {
+ struct nv50_disp *disp = nv50_disp(encoder->dev);
struct nvkm_i2c_aux *aux =
nvkm_i2c_aux_find(i2c, dcbe->i2c_index);
if (aux) {
- nv_encoder->i2c = &nv_connector->aux.ddc;
+ if (disp->disp->oclass < GF110_DISP) {
+ /* HW has no support for address-only
+ * transactions, so we're required to
+ * use custom I2C-over-AUX code.
+ */
+ nv_encoder->i2c = &aux->i2c;
+ } else {
+ nv_encoder->i2c = &nv_connector->aux.ddc;
+ }
nv_encoder->aux = aux;
}
/*TODO: Use DP Info Table to check for support. */
- if (nv50_disp(encoder->dev)->disp->oclass >= GF110_DISP) {
+ if (disp->disp->oclass >= GF110_DISP) {
ret = nv50_mstm_new(nv_encoder, &nv_connector->aux, 16,
nv_connector->base.base.id,
&nv_encoder->dp.mstm);
@@ -3931,6 +3940,8 @@
NV_ATOMIC(drm, "%s: clr %04x (set %04x)\n", crtc->name,
asyh->clr.mask, asyh->set.mask);
+ if (crtc_state->active && !asyh->state.active)
+ drm_crtc_vblank_off(crtc);
if (asyh->clr.mask) {
nv50_head_flush_clr(head, asyh, atom->flush_disable);
@@ -4016,11 +4027,13 @@
nv50_head_flush_set(head, asyh);
interlock_core = 1;
}
- }
- for_each_crtc_in_state(state, crtc, crtc_state, i) {
- if (crtc->state->event)
- drm_crtc_vblank_get(crtc);
+ if (asyh->state.active) {
+ if (!crtc_state->active)
+ drm_crtc_vblank_on(crtc);
+ if (asyh->state.event)
+ drm_crtc_vblank_get(crtc);
+ }
}
/* Update plane(s). */
@@ -4067,12 +4080,14 @@
if (crtc->state->event) {
unsigned long flags;
/* Get correct count/ts if racing with vblank irq */
- drm_accurate_vblank_count(crtc);
+ if (crtc->state->active)
+ drm_accurate_vblank_count(crtc);
spin_lock_irqsave(&crtc->dev->event_lock, flags);
drm_crtc_send_vblank_event(crtc, crtc->state->event);
spin_unlock_irqrestore(&crtc->dev->event_lock, flags);
crtc->state->event = NULL;
- drm_crtc_vblank_put(crtc);
+ if (crtc->state->active)
+ drm_crtc_vblank_put(crtc);
}
}
diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/disp/ior.h b/drivers/gpu/drm/nouveau/nvkm/engine/disp/ior.h
index a24312f..a1e8bf4 100644
--- a/drivers/gpu/drm/nouveau/nvkm/engine/disp/ior.h
+++ b/drivers/gpu/drm/nouveau/nvkm/engine/disp/ior.h
@@ -22,6 +22,7 @@
unsigned proto_evo:4;
enum nvkm_ior_proto {
CRT,
+ TV,
TMDS,
LVDS,
DP,
diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/disp/nv50.h b/drivers/gpu/drm/nouveau/nvkm/engine/disp/nv50.h
index 19c6356..6ea1946 100644
--- a/drivers/gpu/drm/nouveau/nvkm/engine/disp/nv50.h
+++ b/drivers/gpu/drm/nouveau/nvkm/engine/disp/nv50.h
@@ -22,7 +22,7 @@
u8 type[3];
} pior;
- struct nv50_disp_chan *chan[17];
+ struct nv50_disp_chan *chan[21];
};
void nv50_disp_super_1(struct nv50_disp *);
diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/disp/outp.c b/drivers/gpu/drm/nouveau/nvkm/engine/disp/outp.c
index 85aff85..be9e7f8 100644
--- a/drivers/gpu/drm/nouveau/nvkm/engine/disp/outp.c
+++ b/drivers/gpu/drm/nouveau/nvkm/engine/disp/outp.c
@@ -62,6 +62,7 @@
case 0:
switch (outp->info.type) {
case DCB_OUTPUT_ANALOG: *type = DAC; return CRT;
+ case DCB_OUTPUT_TV : *type = DAC; return TV;
case DCB_OUTPUT_TMDS : *type = SOR; return TMDS;
case DCB_OUTPUT_LVDS : *type = SOR; return LVDS;
case DCB_OUTPUT_DP : *type = SOR; return DP;
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/bar/gf100.c b/drivers/gpu/drm/nouveau/nvkm/subdev/bar/gf100.c
index c794b2c..6d8f212 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/bar/gf100.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/bar/gf100.c
@@ -129,7 +129,7 @@
if (bar->bar[0].mem) {
addr = nvkm_memory_addr(bar->bar[0].mem) >> 12;
- nvkm_wr32(device, 0x001714, 0xc0000000 | addr);
+ nvkm_wr32(device, 0x001714, 0x80000000 | addr);
}
return 0;
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/Kbuild b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/Kbuild
index 48f01e4..b768e66 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/Kbuild
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/Kbuild
@@ -25,6 +25,7 @@
nvkm-y += nvkm/subdev/i2c/aux.o
nvkm-y += nvkm/subdev/i2c/auxg94.o
+nvkm-y += nvkm/subdev/i2c/auxgf119.o
nvkm-y += nvkm/subdev/i2c/auxgm200.o
nvkm-y += nvkm/subdev/i2c/anx9805.o
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/aux.c b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/aux.c
index d172e42..4c1f547 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/aux.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/aux.c
@@ -117,6 +117,10 @@
nvkm_i2c_aux_xfer(struct nvkm_i2c_aux *aux, bool retry, u8 type,
u32 addr, u8 *data, u8 *size)
{
+ if (!*size && !aux->func->address_only) {
+ AUX_ERR(aux, "address-only transaction dropped");
+ return -ENOSYS;
+ }
return aux->func->xfer(aux, retry, type, addr, data, size);
}
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/aux.h b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/aux.h
index 27a4a39..9587ab4 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/aux.h
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/aux.h
@@ -3,6 +3,7 @@
#include "pad.h"
struct nvkm_i2c_aux_func {
+ bool address_only;
int (*xfer)(struct nvkm_i2c_aux *, bool retry, u8 type,
u32 addr, u8 *data, u8 *size);
int (*lnk_ctl)(struct nvkm_i2c_aux *, int link_nr, int link_bw,
@@ -17,7 +18,12 @@
int nvkm_i2c_aux_xfer(struct nvkm_i2c_aux *, bool retry, u8 type,
u32 addr, u8 *data, u8 *size);
+int g94_i2c_aux_new_(const struct nvkm_i2c_aux_func *, struct nvkm_i2c_pad *,
+ int, u8, struct nvkm_i2c_aux **);
+
int g94_i2c_aux_new(struct nvkm_i2c_pad *, int, u8, struct nvkm_i2c_aux **);
+int g94_i2c_aux_xfer(struct nvkm_i2c_aux *, bool, u8, u32, u8 *, u8 *);
+int gf119_i2c_aux_new(struct nvkm_i2c_pad *, int, u8, struct nvkm_i2c_aux **);
int gm200_i2c_aux_new(struct nvkm_i2c_pad *, int, u8, struct nvkm_i2c_aux **);
#define AUX_MSG(b,l,f,a...) do { \
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c
index ab8cb19..c8ab1b5 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c
@@ -72,7 +72,7 @@
return 0;
}
-static int
+int
g94_i2c_aux_xfer(struct nvkm_i2c_aux *obj, bool retry,
u8 type, u32 addr, u8 *data, u8 *size)
{
@@ -105,9 +105,9 @@
}
ctrl = nvkm_rd32(device, 0x00e4e4 + base);
- ctrl &= ~0x0001f0ff;
+ ctrl &= ~0x0001f1ff;
ctrl |= type << 12;
- ctrl |= *size - 1;
+ ctrl |= (*size ? (*size - 1) : 0x00000100);
nvkm_wr32(device, 0x00e4e0 + base, addr);
/* (maybe) retry transaction a number of times on failure... */
@@ -160,14 +160,10 @@
return ret < 0 ? ret : (stat & 0x000f0000) >> 16;
}
-static const struct nvkm_i2c_aux_func
-g94_i2c_aux_func = {
- .xfer = g94_i2c_aux_xfer,
-};
-
int
-g94_i2c_aux_new(struct nvkm_i2c_pad *pad, int index, u8 drive,
- struct nvkm_i2c_aux **paux)
+g94_i2c_aux_new_(const struct nvkm_i2c_aux_func *func,
+ struct nvkm_i2c_pad *pad, int index, u8 drive,
+ struct nvkm_i2c_aux **paux)
{
struct g94_i2c_aux *aux;
@@ -175,8 +171,20 @@
return -ENOMEM;
*paux = &aux->base;
- nvkm_i2c_aux_ctor(&g94_i2c_aux_func, pad, index, &aux->base);
+ nvkm_i2c_aux_ctor(func, pad, index, &aux->base);
aux->ch = drive;
aux->base.intr = 1 << aux->ch;
return 0;
}
+
+static const struct nvkm_i2c_aux_func
+g94_i2c_aux = {
+ .xfer = g94_i2c_aux_xfer,
+};
+
+int
+g94_i2c_aux_new(struct nvkm_i2c_pad *pad, int index, u8 drive,
+ struct nvkm_i2c_aux **paux)
+{
+ return g94_i2c_aux_new_(&g94_i2c_aux, pad, index, drive, paux);
+}
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgf119.c b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgf119.c
new file mode 100644
index 0000000..dab40cd
--- /dev/null
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgf119.c
@@ -0,0 +1,35 @@
+/*
+ * Copyright 2017 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include "aux.h"
+
+static const struct nvkm_i2c_aux_func
+gf119_i2c_aux = {
+ .address_only = true,
+ .xfer = g94_i2c_aux_xfer,
+};
+
+int
+gf119_i2c_aux_new(struct nvkm_i2c_pad *pad, int index, u8 drive,
+ struct nvkm_i2c_aux **paux)
+{
+ return g94_i2c_aux_new_(&gf119_i2c_aux, pad, index, drive, paux);
+}
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm200.c b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm200.c
index ee091fa..7ef6089 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm200.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm200.c
@@ -105,9 +105,9 @@
}
ctrl = nvkm_rd32(device, 0x00d954 + base);
- ctrl &= ~0x0001f0ff;
+ ctrl &= ~0x0001f1ff;
ctrl |= type << 12;
- ctrl |= *size - 1;
+ ctrl |= (*size ? (*size - 1) : 0x00000100);
nvkm_wr32(device, 0x00d950 + base, addr);
/* (maybe) retry transaction a number of times on failure... */
@@ -162,6 +162,7 @@
static const struct nvkm_i2c_aux_func
gm200_i2c_aux_func = {
+ .address_only = true,
.xfer = gm200_i2c_aux_xfer,
};
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/padgf119.c b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/padgf119.c
index d53212f..3bc4d031 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/padgf119.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/padgf119.c
@@ -28,7 +28,7 @@
static const struct nvkm_i2c_pad_func
gf119_i2c_pad_s_func = {
.bus_new_4 = gf119_i2c_bus_new,
- .aux_new_6 = g94_i2c_aux_new,
+ .aux_new_6 = gf119_i2c_aux_new,
.mode = g94_i2c_pad_mode,
};
@@ -41,7 +41,7 @@
static const struct nvkm_i2c_pad_func
gf119_i2c_pad_x_func = {
.bus_new_4 = gf119_i2c_bus_new,
- .aux_new_6 = g94_i2c_aux_new,
+ .aux_new_6 = gf119_i2c_aux_new,
};
int
diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c
index fa4f8f0..e67ed38 100644
--- a/drivers/gpu/drm/radeon/atombios_encoders.c
+++ b/drivers/gpu/drm/radeon/atombios_encoders.c
@@ -31,6 +31,7 @@
#include "radeon_asic.h"
#include "atom.h"
#include <linux/backlight.h>
+#include <linux/dmi.h>
extern int atom_debug;
@@ -2184,9 +2185,17 @@
goto assigned;
}
- /* on DCE32 and encoder can driver any block so just crtc id */
+ /*
+ * On DCE32 any encoder can drive any block so usually just use crtc id,
+ * but Apple thinks different at least on iMac10,1, so there use linkb,
+ * otherwise the internal eDP panel will stay dark.
+ */
if (ASIC_IS_DCE32(rdev)) {
- enc_idx = radeon_crtc->crtc_id;
+ if (dmi_match(DMI_PRODUCT_NAME, "iMac10,1"))
+ enc_idx = (dig->linkb) ? 1 : 0;
+ else
+ enc_idx = radeon_crtc->crtc_id;
+
goto assigned;
}
diff --git a/drivers/gpu/drm/radeon/radeon_kfd.c b/drivers/gpu/drm/radeon/radeon_kfd.c
index 699fe7f..a2ab6dc 100644
--- a/drivers/gpu/drm/radeon/radeon_kfd.c
+++ b/drivers/gpu/drm/radeon/radeon_kfd.c
@@ -184,7 +184,6 @@
if (rdev->kfd) {
struct kgd2kfd_shared_resources gpu_resources = {
.compute_vmid_bitmap = 0xFF00,
- .num_mec = 1,
.num_pipe_per_mec = 4,
.num_queue_per_pipe = 8
};
diff --git a/drivers/gpu/drm/rockchip/Kconfig b/drivers/gpu/drm/rockchip/Kconfig
index 50c41c0..dcc539b 100644
--- a/drivers/gpu/drm/rockchip/Kconfig
+++ b/drivers/gpu/drm/rockchip/Kconfig
@@ -5,6 +5,10 @@
select DRM_KMS_HELPER
select DRM_PANEL
select VIDEOMODE_HELPERS
+ select DRM_ANALOGIX_DP if ROCKCHIP_ANALOGIX_DP
+ select DRM_DW_HDMI if ROCKCHIP_DW_HDMI
+ select DRM_MIPI_DSI if ROCKCHIP_DW_MIPI_DSI
+ select SND_SOC_HDMI_CODEC if ROCKCHIP_CDN_DP && SND_SOC
help
Choose this option if you have a Rockchip soc chipset.
This driver provides kernel mode setting and buffer
@@ -12,10 +16,10 @@
2D or 3D acceleration; acceleration is performed by other
IP found on the SoC.
+if DRM_ROCKCHIP
+
config ROCKCHIP_ANALOGIX_DP
bool "Rockchip specific extensions for Analogix DP driver"
- depends on DRM_ROCKCHIP
- select DRM_ANALOGIX_DP
help
This selects support for Rockchip SoC specific extensions
for the Analogix Core DP driver. If you want to enable DP
@@ -23,9 +27,7 @@
config ROCKCHIP_CDN_DP
bool "Rockchip cdn DP"
- depends on DRM_ROCKCHIP
- depends on EXTCON
- select SND_SOC_HDMI_CODEC if SND_SOC
+ depends on EXTCON=y || (EXTCON=m && DRM_ROCKCHIP=m)
help
This selects support for Rockchip SoC specific extensions
for the cdn DP driver. If you want to enable Dp on
@@ -34,8 +36,6 @@
config ROCKCHIP_DW_HDMI
bool "Rockchip specific extensions for Synopsys DW HDMI"
- depends on DRM_ROCKCHIP
- select DRM_DW_HDMI
help
This selects support for Rockchip SoC specific extensions
for the Synopsys DesignWare HDMI driver. If you want to
@@ -44,8 +44,6 @@
config ROCKCHIP_DW_MIPI_DSI
bool "Rockchip specific extensions for Synopsys DW MIPI DSI"
- depends on DRM_ROCKCHIP
- select DRM_MIPI_DSI
help
This selects support for Rockchip SoC specific extensions
for the Synopsys DesignWare HDMI driver. If you want to
@@ -54,8 +52,9 @@
config ROCKCHIP_INNO_HDMI
bool "Rockchip specific extensions for Innosilicon HDMI"
- depends on DRM_ROCKCHIP
help
This selects support for Rockchip SoC specific extensions
for the Innosilicon HDMI driver. If you want to enable
HDMI on RK3036 based SoC, you should select this option.
+
+endif
diff --git a/drivers/gpu/drm/rockchip/cdn-dp-core.c b/drivers/gpu/drm/rockchip/cdn-dp-core.c
index 14fa1f8..9b0b058 100644
--- a/drivers/gpu/drm/rockchip/cdn-dp-core.c
+++ b/drivers/gpu/drm/rockchip/cdn-dp-core.c
@@ -1195,7 +1195,7 @@
continue;
port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
- if (!dp)
+ if (!port)
return -ENOMEM;
port->extcon = extcon;
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
index 47905fa..c7e96b8 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
@@ -45,13 +45,13 @@
*
* @crtc: array of enabled CRTCs, used to map from "pipe" to drm_crtc.
* @num_pipe: number of pipes for this device.
+ * @mm_lock: protect drm_mm on multi-threads.
*/
struct rockchip_drm_private {
struct drm_fb_helper fbdev_helper;
struct drm_gem_object *fbdev_bo;
struct drm_atomic_state *state;
struct iommu_domain *domain;
- /* protect drm_mm on multi-threads */
struct mutex mm_lock;
struct drm_mm mm;
struct list_head psr_list;
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_gem.c b/drivers/gpu/drm/rockchip/rockchip_drm_gem.c
index df9e570..b74ac71 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_gem.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_gem.c
@@ -29,12 +29,11 @@
ssize_t ret;
mutex_lock(&private->mm_lock);
-
ret = drm_mm_insert_node_generic(&private->mm, &rk_obj->mm,
rk_obj->base.size, PAGE_SIZE,
0, 0);
-
mutex_unlock(&private->mm_lock);
+
if (ret < 0) {
DRM_ERROR("out of I/O virtual memory: %zd\n", ret);
return ret;
@@ -56,7 +55,9 @@
return 0;
err_remove_node:
+ mutex_lock(&private->mm_lock);
drm_mm_remove_node(&rk_obj->mm);
+ mutex_unlock(&private->mm_lock);
return ret;
}
diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c
index 403bbd5..a12cc7e 100644
--- a/drivers/gpu/drm/vc4/vc4_crtc.c
+++ b/drivers/gpu/drm/vc4/vc4_crtc.c
@@ -520,6 +520,34 @@
SCALER_DISPSTATX_EMPTY);
}
+static void vc4_crtc_update_dlist(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
+ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+ struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(crtc->state);
+
+ if (crtc->state->event) {
+ unsigned long flags;
+
+ crtc->state->event->pipe = drm_crtc_index(crtc);
+
+ WARN_ON(drm_crtc_vblank_get(crtc) != 0);
+
+ spin_lock_irqsave(&dev->event_lock, flags);
+ vc4_crtc->event = crtc->state->event;
+ crtc->state->event = NULL;
+
+ HVS_WRITE(SCALER_DISPLISTX(vc4_crtc->channel),
+ vc4_state->mm.start);
+
+ spin_unlock_irqrestore(&dev->event_lock, flags);
+ } else {
+ HVS_WRITE(SCALER_DISPLISTX(vc4_crtc->channel),
+ vc4_state->mm.start);
+ }
+}
+
static void vc4_crtc_enable(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
@@ -530,6 +558,12 @@
require_hvs_enabled(dev);
+ /* Enable vblank irq handling before crtc is started otherwise
+ * drm_crtc_get_vblank() fails in vc4_crtc_update_dlist().
+ */
+ drm_crtc_vblank_on(crtc);
+ vc4_crtc_update_dlist(crtc);
+
/* Turn on the scaler, which will wait for vstart to start
* compositing.
*/
@@ -541,9 +575,6 @@
/* Turn on the pixel valve, which will emit the vstart signal. */
CRTC_WRITE(PV_V_CONTROL,
CRTC_READ(PV_V_CONTROL) | PV_VCONTROL_VIDEN);
-
- /* Enable vblank irq handling after crtc is started. */
- drm_crtc_vblank_on(crtc);
}
static bool vc4_crtc_mode_fixup(struct drm_crtc *crtc,
@@ -598,7 +629,6 @@
{
struct drm_device *dev = crtc->dev;
struct vc4_dev *vc4 = to_vc4_dev(dev);
- struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(crtc->state);
struct drm_plane *plane;
bool debug_dump_regs = false;
@@ -620,25 +650,15 @@
WARN_ON_ONCE(dlist_next - dlist_start != vc4_state->mm.size);
- if (crtc->state->event) {
- unsigned long flags;
-
- crtc->state->event->pipe = drm_crtc_index(crtc);
-
- WARN_ON(drm_crtc_vblank_get(crtc) != 0);
-
- spin_lock_irqsave(&dev->event_lock, flags);
- vc4_crtc->event = crtc->state->event;
- crtc->state->event = NULL;
-
- HVS_WRITE(SCALER_DISPLISTX(vc4_crtc->channel),
- vc4_state->mm.start);
-
- spin_unlock_irqrestore(&dev->event_lock, flags);
- } else {
- HVS_WRITE(SCALER_DISPLISTX(vc4_crtc->channel),
- vc4_state->mm.start);
- }
+ /* Only update DISPLIST if the CRTC was already running and is not
+ * being disabled.
+ * vc4_crtc_enable() takes care of updating the dlist just after
+ * re-enabling VBLANK interrupts and before enabling the engine.
+ * If the CRTC is being disabled, there's no point in updating this
+ * information.
+ */
+ if (crtc->state->active && old_state->active)
+ vc4_crtc_update_dlist(crtc);
if (debug_dump_regs) {
DRM_INFO("CRTC %d HVS after:\n", drm_crtc_index(crtc));
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_buffer.c b/drivers/gpu/drm/vmwgfx/vmwgfx_buffer.c
index 35bf781..c705632 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_buffer.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_buffer.c
@@ -30,49 +30,49 @@
#include <drm/ttm/ttm_placement.h>
#include <drm/ttm/ttm_page_alloc.h>
-static struct ttm_place vram_placement_flags = {
+static const struct ttm_place vram_placement_flags = {
.fpfn = 0,
.lpfn = 0,
.flags = TTM_PL_FLAG_VRAM | TTM_PL_FLAG_CACHED
};
-static struct ttm_place vram_ne_placement_flags = {
+static const struct ttm_place vram_ne_placement_flags = {
.fpfn = 0,
.lpfn = 0,
.flags = TTM_PL_FLAG_VRAM | TTM_PL_FLAG_CACHED | TTM_PL_FLAG_NO_EVICT
};
-static struct ttm_place sys_placement_flags = {
+static const struct ttm_place sys_placement_flags = {
.fpfn = 0,
.lpfn = 0,
.flags = TTM_PL_FLAG_SYSTEM | TTM_PL_FLAG_CACHED
};
-static struct ttm_place sys_ne_placement_flags = {
+static const struct ttm_place sys_ne_placement_flags = {
.fpfn = 0,
.lpfn = 0,
.flags = TTM_PL_FLAG_SYSTEM | TTM_PL_FLAG_CACHED | TTM_PL_FLAG_NO_EVICT
};
-static struct ttm_place gmr_placement_flags = {
+static const struct ttm_place gmr_placement_flags = {
.fpfn = 0,
.lpfn = 0,
.flags = VMW_PL_FLAG_GMR | TTM_PL_FLAG_CACHED
};
-static struct ttm_place gmr_ne_placement_flags = {
+static const struct ttm_place gmr_ne_placement_flags = {
.fpfn = 0,
.lpfn = 0,
.flags = VMW_PL_FLAG_GMR | TTM_PL_FLAG_CACHED | TTM_PL_FLAG_NO_EVICT
};
-static struct ttm_place mob_placement_flags = {
+static const struct ttm_place mob_placement_flags = {
.fpfn = 0,
.lpfn = 0,
.flags = VMW_PL_FLAG_MOB | TTM_PL_FLAG_CACHED
};
-static struct ttm_place mob_ne_placement_flags = {
+static const struct ttm_place mob_ne_placement_flags = {
.fpfn = 0,
.lpfn = 0,
.flags = VMW_PL_FLAG_MOB | TTM_PL_FLAG_CACHED | TTM_PL_FLAG_NO_EVICT
@@ -85,7 +85,7 @@
.busy_placement = &vram_placement_flags
};
-static struct ttm_place vram_gmr_placement_flags[] = {
+static const struct ttm_place vram_gmr_placement_flags[] = {
{
.fpfn = 0,
.lpfn = 0,
@@ -97,7 +97,7 @@
}
};
-static struct ttm_place gmr_vram_placement_flags[] = {
+static const struct ttm_place gmr_vram_placement_flags[] = {
{
.fpfn = 0,
.lpfn = 0,
@@ -116,7 +116,7 @@
.busy_placement = &gmr_placement_flags
};
-static struct ttm_place vram_gmr_ne_placement_flags[] = {
+static const struct ttm_place vram_gmr_ne_placement_flags[] = {
{
.fpfn = 0,
.lpfn = 0,
@@ -165,7 +165,7 @@
.busy_placement = &sys_ne_placement_flags
};
-static struct ttm_place evictable_placement_flags[] = {
+static const struct ttm_place evictable_placement_flags[] = {
{
.fpfn = 0,
.lpfn = 0,
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_cmdbuf.c b/drivers/gpu/drm/vmwgfx/vmwgfx_cmdbuf.c
index 99a7f4a..8617879 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_cmdbuf.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_cmdbuf.c
@@ -779,8 +779,8 @@
if (ret)
return ret;
- header->cb_header = dma_pool_alloc(man->headers, GFP_KERNEL,
- &header->handle);
+ header->cb_header = dma_pool_zalloc(man->headers, GFP_KERNEL,
+ &header->handle);
if (!header->cb_header) {
ret = -ENOMEM;
goto out_no_cb_header;
@@ -790,7 +790,6 @@
cb_hdr = header->cb_header;
offset = header->node.start << PAGE_SHIFT;
header->cmd = man->map + offset;
- memset(cb_hdr, 0, sizeof(*cb_hdr));
if (man->using_mob) {
cb_hdr->flags = SVGA_CB_FLAG_MOB;
cb_hdr->ptr.mob.mobid = man->cmd_space->mem.start;
@@ -827,8 +826,8 @@
if (WARN_ON_ONCE(size > VMW_CMDBUF_INLINE_SIZE))
return -ENOMEM;
- dheader = dma_pool_alloc(man->dheaders, GFP_KERNEL,
- &header->handle);
+ dheader = dma_pool_zalloc(man->dheaders, GFP_KERNEL,
+ &header->handle);
if (!dheader)
return -ENOMEM;
@@ -837,7 +836,6 @@
cb_hdr = &dheader->cb_header;
header->cb_header = cb_hdr;
header->cmd = dheader->cmd;
- memset(dheader, 0, sizeof(*dheader));
cb_hdr->status = SVGA_CB_STATUS_NONE;
cb_hdr->flags = SVGA_CB_FLAG_NONE;
cb_hdr->ptr.pa = (u64)header->handle +
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_cmdbuf_res.c b/drivers/gpu/drm/vmwgfx/vmwgfx_cmdbuf_res.c
index 1f013d4..36c7b6c 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_cmdbuf_res.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_cmdbuf_res.c
@@ -205,7 +205,7 @@
int ret;
cres = kzalloc(sizeof(*cres), GFP_KERNEL);
- if (unlikely(cres == NULL))
+ if (unlikely(!cres))
return -ENOMEM;
cres->hash.key = user_key | (res_type << 24);
@@ -291,7 +291,7 @@
int ret;
man = kzalloc(sizeof(*man), GFP_KERNEL);
- if (man == NULL)
+ if (!man)
return ERR_PTR(-ENOMEM);
man->dev_priv = dev_priv;
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_context.c b/drivers/gpu/drm/vmwgfx/vmwgfx_context.c
index bcc6d41..4212b3e 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_context.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_context.c
@@ -210,8 +210,8 @@
for (i = 0; i < SVGA_COTABLE_DX10_MAX; ++i) {
uctx->cotables[i] = vmw_cotable_alloc(dev_priv,
&uctx->res, i);
- if (unlikely(uctx->cotables[i] == NULL)) {
- ret = -ENOMEM;
+ if (unlikely(IS_ERR(uctx->cotables[i]))) {
+ ret = PTR_ERR(uctx->cotables[i]);
goto out_cotables;
}
}
@@ -777,7 +777,7 @@
}
ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
- if (unlikely(ctx == NULL)) {
+ if (unlikely(!ctx)) {
ttm_mem_global_free(vmw_mem_glob(dev_priv),
vmw_user_context_size);
ret = -ENOMEM;
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_cotable.c b/drivers/gpu/drm/vmwgfx/vmwgfx_cotable.c
index 6c026d7..d87861b 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_cotable.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_cotable.c
@@ -584,7 +584,7 @@
return ERR_PTR(ret);
vcotbl = kzalloc(sizeof(*vcotbl), GFP_KERNEL);
- if (unlikely(vcotbl == NULL)) {
+ if (unlikely(!vcotbl)) {
ret = -ENOMEM;
goto out_no_alloc;
}
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
index 4a64155..4436d53 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
@@ -227,7 +227,7 @@
DRM_AUTH | DRM_RENDER_ALLOW),
};
-static struct pci_device_id vmw_pci_id_list[] = {
+static const struct pci_device_id vmw_pci_id_list[] = {
{0x15ad, 0x0405, PCI_ANY_ID, PCI_ANY_ID, 0, 0, VMWGFX_CHIP_SVGAII},
{0, 0, 0}
};
@@ -630,7 +630,7 @@
char host_log[100] = {0};
dev_priv = kzalloc(sizeof(*dev_priv), GFP_KERNEL);
- if (unlikely(dev_priv == NULL)) {
+ if (unlikely(!dev_priv)) {
DRM_ERROR("Failed allocating a device private struct.\n");
return -ENOMEM;
}
@@ -1035,7 +1035,7 @@
int ret = -ENOMEM;
vmw_fp = kzalloc(sizeof(*vmw_fp), GFP_KERNEL);
- if (unlikely(vmw_fp == NULL))
+ if (unlikely(!vmw_fp))
return ret;
vmw_fp->tfile = ttm_object_file_init(dev_priv->tdev, 10);
@@ -1196,7 +1196,7 @@
struct vmw_master *vmaster;
vmaster = kzalloc(sizeof(*vmaster), GFP_KERNEL);
- if (unlikely(vmaster == NULL))
+ if (unlikely(!vmaster))
return -ENOMEM;
vmw_master_init(vmaster);
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
index c7b53d9..2cfb3c9 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
@@ -264,7 +264,7 @@
}
node = kzalloc(sizeof(*node), GFP_KERNEL);
- if (unlikely(node == NULL)) {
+ if (unlikely(!node)) {
DRM_ERROR("Failed to allocate a resource validation "
"entry.\n");
return -ENOMEM;
@@ -452,7 +452,7 @@
struct vmw_resource_relocation *rel;
rel = kmalloc(sizeof(*rel), GFP_KERNEL);
- if (unlikely(rel == NULL)) {
+ if (unlikely(!rel)) {
DRM_ERROR("Failed to allocate a resource relocation.\n");
return -ENOMEM;
}
@@ -519,7 +519,7 @@
struct vmw_sw_context *sw_context,
SVGA3dCmdHeader *header)
{
- return capable(CAP_SYS_ADMIN) ? : -EINVAL;
+ return -EINVAL;
}
static int vmw_cmd_ok(struct vmw_private *dev_priv,
@@ -2584,7 +2584,7 @@
/**
* vmw_cmd_dx_ia_set_vertex_buffers - Validate an
- * SVGA_3D_CMD_DX_IA_SET_VERTEX_BUFFERS command.
+ * SVGA_3D_CMD_DX_IA_SET_INDEX_BUFFER command.
*
* @dev_priv: Pointer to a device private struct.
* @sw_context: The software context being used for this batch.
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c
index 6b2708b..b8bc5bc 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c
@@ -284,7 +284,7 @@
{
struct vmw_fence_manager *fman = kzalloc(sizeof(*fman), GFP_KERNEL);
- if (unlikely(fman == NULL))
+ if (unlikely(!fman))
return NULL;
fman->dev_priv = dev_priv;
@@ -541,7 +541,7 @@
int ret;
fence = kzalloc(sizeof(*fence), GFP_KERNEL);
- if (unlikely(fence == NULL))
+ if (unlikely(!fence))
return -ENOMEM;
ret = vmw_fence_obj_init(fman, fence, seqno,
@@ -606,7 +606,7 @@
return ret;
ufence = kzalloc(sizeof(*ufence), GFP_KERNEL);
- if (unlikely(ufence == NULL)) {
+ if (unlikely(!ufence)) {
ret = -ENOMEM;
goto out_no_object;
}
@@ -966,7 +966,7 @@
struct vmw_fence_manager *fman = fman_from_fence(fence);
eaction = kzalloc(sizeof(*eaction), GFP_KERNEL);
- if (unlikely(eaction == NULL))
+ if (unlikely(!eaction))
return -ENOMEM;
eaction->event = event;
@@ -1002,7 +1002,7 @@
int ret;
event = kzalloc(sizeof(*event), GFP_KERNEL);
- if (unlikely(event == NULL)) {
+ if (unlikely(!event)) {
DRM_ERROR("Failed to allocate an event.\n");
ret = -ENOMEM;
goto out_no_space;
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_gmrid_manager.c b/drivers/gpu/drm/vmwgfx/vmwgfx_gmrid_manager.c
index c1900f4..d2b03d4 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_gmrid_manager.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_gmrid_manager.c
@@ -121,7 +121,7 @@
struct vmwgfx_gmrid_man *gman =
kzalloc(sizeof(*gman), GFP_KERNEL);
- if (unlikely(gman == NULL))
+ if (unlikely(!gman))
return -ENOMEM;
spin_lock_init(&gman->lock);
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
index 3d94ea6..61e06f0 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
@@ -384,6 +384,12 @@
hotspot_x = du->hotspot_x;
hotspot_y = du->hotspot_y;
+
+ if (plane->fb) {
+ hotspot_x += plane->fb->hot_x;
+ hotspot_y += plane->fb->hot_y;
+ }
+
du->cursor_surface = vps->surf;
du->cursor_dmabuf = vps->dmabuf;
@@ -411,6 +417,9 @@
vmw_cursor_update_position(dev_priv, true,
du->cursor_x + hotspot_x,
du->cursor_y + hotspot_y);
+
+ du->core_hotspot_x = hotspot_x - du->hotspot_x;
+ du->core_hotspot_y = hotspot_y - du->hotspot_y;
} else {
DRM_ERROR("Failed to update cursor image\n");
}
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_mob.c b/drivers/gpu/drm/vmwgfx/vmwgfx_mob.c
index 941bcfd..b17f08f 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_mob.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_mob.c
@@ -320,14 +320,14 @@
if (dev_priv->has_dx) {
*otables = kmemdup(dx_tables, sizeof(dx_tables), GFP_KERNEL);
- if (*otables == NULL)
+ if (!(*otables))
return -ENOMEM;
dev_priv->otable_batch.num_otables = ARRAY_SIZE(dx_tables);
} else {
*otables = kmemdup(pre_dx_tables, sizeof(pre_dx_tables),
GFP_KERNEL);
- if (*otables == NULL)
+ if (!(*otables))
return -ENOMEM;
dev_priv->otable_batch.num_otables = ARRAY_SIZE(pre_dx_tables);
@@ -407,7 +407,7 @@
{
struct vmw_mob *mob = kzalloc(sizeof(*mob), GFP_KERNEL);
- if (unlikely(mob == NULL))
+ if (unlikely(!mob))
return NULL;
mob->num_pages = vmw_mob_calculate_pt_pages(data_pages);
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c b/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c
index 6063c96..9700099 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c
@@ -244,7 +244,7 @@
reply_len = ebx;
reply = kzalloc(reply_len + 1, GFP_KERNEL);
- if (reply == NULL) {
+ if (!reply) {
DRM_ERROR("Cannot allocate memory for reply\n");
return -ENOMEM;
}
@@ -340,7 +340,7 @@
msg_len = strlen(guest_info_param) + strlen("info-get ") + 1;
msg = kzalloc(msg_len, GFP_KERNEL);
- if (msg == NULL) {
+ if (!msg) {
DRM_ERROR("Cannot allocate memory to get %s", guest_info_param);
return -ENOMEM;
}
@@ -400,7 +400,7 @@
msg_len = strlen(log) + strlen("log ") + 1;
msg = kzalloc(msg_len, GFP_KERNEL);
- if (msg == NULL) {
+ if (!msg) {
DRM_ERROR("Cannot allocate memory for log message\n");
return -ENOMEM;
}
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
index 7d591f6..a96f90f 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
@@ -446,7 +446,7 @@
int ret;
user_bo = kzalloc(sizeof(*user_bo), GFP_KERNEL);
- if (unlikely(user_bo == NULL)) {
+ if (unlikely(!user_bo)) {
DRM_ERROR("Failed to allocate a buffer.\n");
return -ENOMEM;
}
@@ -836,7 +836,7 @@
}
backup = kzalloc(sizeof(*backup), GFP_KERNEL);
- if (unlikely(backup == NULL))
+ if (unlikely(!backup))
return -ENOMEM;
ret = vmw_dmabuf_init(res->dev_priv, backup, res->backup_size,
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_shader.c b/drivers/gpu/drm/vmwgfx/vmwgfx_shader.c
index 68f135c..9b832f1 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_shader.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_shader.c
@@ -751,7 +751,7 @@
}
ushader = kzalloc(sizeof(*ushader), GFP_KERNEL);
- if (unlikely(ushader == NULL)) {
+ if (unlikely(!ushader)) {
ttm_mem_global_free(vmw_mem_glob(dev_priv),
vmw_user_shader_size);
ret = -ENOMEM;
@@ -821,7 +821,7 @@
}
shader = kzalloc(sizeof(*shader), GFP_KERNEL);
- if (unlikely(shader == NULL)) {
+ if (unlikely(!shader)) {
ttm_mem_global_free(vmw_mem_glob(dev_priv),
vmw_shader_size);
ret = -ENOMEM;
@@ -981,7 +981,7 @@
/* Allocate and pin a DMA buffer */
buf = kzalloc(sizeof(*buf), GFP_KERNEL);
- if (unlikely(buf == NULL))
+ if (unlikely(!buf))
return -ENOMEM;
ret = vmw_dmabuf_init(dev_priv, buf, size, &vmw_sys_ne_placement,
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c b/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c
index 50be1f0..5284e8d 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c
@@ -1640,8 +1640,8 @@
* something arbitrarily large and we will reject any layout
* that doesn't fit prim_bb_mem later
*/
- dev->mode_config.max_width = 16384;
- dev->mode_config.max_height = 16384;
+ dev->mode_config.max_width = 8192;
+ dev->mode_config.max_height = 8192;
}
vmw_kms_create_implicit_placement_property(dev_priv, false);
diff --git a/drivers/gpu/host1x/dev.c b/drivers/gpu/host1x/dev.c
index 2c58a39..7782725 100644
--- a/drivers/gpu/host1x/dev.c
+++ b/drivers/gpu/host1x/dev.c
@@ -186,8 +186,13 @@
return -ENOMEM;
err = iommu_attach_device(host->domain, &pdev->dev);
- if (err)
+ if (err == -ENODEV) {
+ iommu_domain_free(host->domain);
+ host->domain = NULL;
+ goto skip_iommu;
+ } else if (err) {
goto fail_free_domain;
+ }
geometry = &host->domain->geometry;
@@ -198,6 +203,7 @@
host->iova_end = geometry->aperture_end;
}
+skip_iommu:
err = host1x_channel_list_init(&host->channel_list,
host->info->nb_channels);
if (err) {
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 6fd01a6..9017dcc1 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -2216,6 +2216,7 @@
#if IS_ENABLED(CONFIG_HID_ORTEK)
{ HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_PKB1700) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_WKB2000) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_IHOME_IMAC_A210S) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SKYCABLE, USB_DEVICE_ID_SKYCABLE_WIRELESS_PRESENTER) },
#endif
#if IS_ENABLED(CONFIG_HID_PANTHERLORD)
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 3d911bf..c9ba4c6 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -824,6 +824,7 @@
#define USB_VENDOR_ID_ORTEK 0x05a4
#define USB_DEVICE_ID_ORTEK_PKB1700 0x1700
#define USB_DEVICE_ID_ORTEK_WKB2000 0x2000
+#define USB_DEVICE_ID_ORTEK_IHOME_IMAC_A210S 0x8003
#define USB_VENDOR_ID_PLANTRONICS 0x047f
diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
index 41b3946..501e16a 100644
--- a/drivers/hid/hid-logitech-hidpp.c
+++ b/drivers/hid/hid-logitech-hidpp.c
@@ -2732,6 +2732,9 @@
hidpp_battery_props,
sizeof(hidpp_battery_props),
GFP_KERNEL);
+ if (!battery_props)
+ return -ENOMEM;
+
num_battery_props = ARRAY_SIZE(hidpp_battery_props) - 2;
if (hidpp->capabilities & HIDPP_CAPABILITY_BATTERY_MILEAGE)
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index f3e35e7..aff20f4 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -620,16 +620,6 @@
return 0;
}
-static int mt_touch_input_mapped(struct hid_device *hdev, struct hid_input *hi,
- struct hid_field *field, struct hid_usage *usage,
- unsigned long **bit, int *max)
-{
- if (usage->type == EV_KEY || usage->type == EV_ABS)
- set_bit(usage->type, hi->input->evbit);
-
- return -1;
-}
-
static int mt_compute_slot(struct mt_device *td, struct input_dev *input)
{
__s32 quirks = td->mtclass.quirks;
@@ -969,8 +959,10 @@
return 0;
if (field->application == HID_DG_TOUCHSCREEN ||
- field->application == HID_DG_TOUCHPAD)
- return mt_touch_input_mapped(hdev, hi, field, usage, bit, max);
+ field->application == HID_DG_TOUCHPAD) {
+ /* We own these mappings, tell hid-input to ignore them */
+ return -1;
+ }
/* let hid-core decide for the others */
return 0;
diff --git a/drivers/hid/hid-ortek.c b/drivers/hid/hid-ortek.c
index 6620f15..8783a06 100644
--- a/drivers/hid/hid-ortek.c
+++ b/drivers/hid/hid-ortek.c
@@ -5,6 +5,7 @@
*
* Ortek PKB-1700
* Ortek WKB-2000
+ * iHome IMAC-A210S
* Skycable wireless presenter
*
* Copyright (c) 2010 Johnathon Harris <jmharris@gmail.com>
@@ -28,10 +29,10 @@
unsigned int *rsize)
{
if (*rsize >= 56 && rdesc[54] == 0x25 && rdesc[55] == 0x01) {
- hid_info(hdev, "Fixing up logical minimum in report descriptor (Ortek)\n");
+ hid_info(hdev, "Fixing up logical maximum in report descriptor (Ortek)\n");
rdesc[55] = 0x92;
} else if (*rsize >= 54 && rdesc[52] == 0x25 && rdesc[53] == 0x01) {
- hid_info(hdev, "Fixing up logical minimum in report descriptor (Skycable)\n");
+ hid_info(hdev, "Fixing up logical maximum in report descriptor (Skycable)\n");
rdesc[53] = 0x65;
}
return rdesc;
@@ -40,6 +41,7 @@
static const struct hid_device_id ortek_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_PKB1700) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_WKB2000) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_IHOME_IMAC_A210S) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SKYCABLE, USB_DEVICE_ID_SKYCABLE_WIRELESS_PRESENTER) },
{ }
};
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index 76013eb..c008847 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -680,18 +680,21 @@
struct usbhid_device *usbhid = hid->driver_data;
int res;
+ set_bit(HID_OPENED, &usbhid->iofl);
+
if (hid->quirks & HID_QUIRK_ALWAYS_POLL)
return 0;
res = usb_autopm_get_interface(usbhid->intf);
/* the device must be awake to reliably request remote wakeup */
- if (res < 0)
+ if (res < 0) {
+ clear_bit(HID_OPENED, &usbhid->iofl);
return -EIO;
+ }
usbhid->intf->needs_remote_wakeup = 1;
set_bit(HID_RESUME_RUNNING, &usbhid->iofl);
- set_bit(HID_OPENED, &usbhid->iofl);
set_bit(HID_IN_POLLING, &usbhid->iofl);
res = hid_start_in(hid);
@@ -727,19 +730,20 @@
{
struct usbhid_device *usbhid = hid->driver_data;
- if (hid->quirks & HID_QUIRK_ALWAYS_POLL)
- return;
-
/*
* Make sure we don't restart data acquisition due to
* a resumption we no longer care about by avoiding racing
* with hid_start_in().
*/
spin_lock_irq(&usbhid->lock);
- clear_bit(HID_IN_POLLING, &usbhid->iofl);
clear_bit(HID_OPENED, &usbhid->iofl);
+ if (!(hid->quirks & HID_QUIRK_ALWAYS_POLL))
+ clear_bit(HID_IN_POLLING, &usbhid->iofl);
spin_unlock_irq(&usbhid->lock);
+ if (hid->quirks & HID_QUIRK_ALWAYS_POLL)
+ return;
+
hid_cancel_delayed_stuff(usbhid);
usb_kill_urb(usbhid->urbin);
usbhid->intf->needs_remote_wakeup = 0;
diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c
index e9bf0bb..e57cc40 100644
--- a/drivers/hv/channel.c
+++ b/drivers/hv/channel.c
@@ -606,6 +606,8 @@
get_order(channel->ringbuffer_pagecount * PAGE_SIZE));
out:
+ /* re-enable tasklet for use on re-open */
+ tasklet_enable(&channel->callback_event);
return ret;
}
diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
index 0af7fd3..76c34f4 100644
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -566,6 +566,8 @@
if (ret)
return ret;
s->fan_count = tmp[0];
+ if (s->fan_count > 10)
+ s->fan_count = 10;
ret = applesmc_get_lower_bound(&s->temp_begin, "T");
if (ret)
@@ -811,7 +813,8 @@
char newkey[5];
u8 buffer[2];
- sprintf(newkey, fan_speed_fmt[to_option(attr)], to_index(attr));
+ scnprintf(newkey, sizeof(newkey), fan_speed_fmt[to_option(attr)],
+ to_index(attr));
ret = applesmc_read_key(newkey, buffer, 2);
speed = ((buffer[0] << 8 | buffer[1]) >> 2);
@@ -834,7 +837,8 @@
if (kstrtoul(sysfsbuf, 10, &speed) < 0 || speed >= 0x4000)
return -EINVAL; /* Bigger than a 14-bit value */
- sprintf(newkey, fan_speed_fmt[to_option(attr)], to_index(attr));
+ scnprintf(newkey, sizeof(newkey), fan_speed_fmt[to_option(attr)],
+ to_index(attr));
buffer[0] = (speed >> 6) & 0xff;
buffer[1] = (speed << 2) & 0xff;
@@ -903,7 +907,7 @@
char newkey[5];
u8 buffer[17];
- sprintf(newkey, FAN_ID_FMT, to_index(attr));
+ scnprintf(newkey, sizeof(newkey), FAN_ID_FMT, to_index(attr));
ret = applesmc_read_key(newkey, buffer, 16);
buffer[16] = 0;
@@ -1116,7 +1120,8 @@
}
for (i = 0; i < num; i++) {
node = &grp->nodes[i];
- sprintf(node->name, grp->format, i + 1);
+ scnprintf(node->name, sizeof(node->name), grp->format,
+ i + 1);
node->sda.index = (grp->option << 16) | (i & 0xffff);
node->sda.dev_attr.show = grp->show;
node->sda.dev_attr.store = grp->store;
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 45095b3..7bb65a4 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -4,6 +4,11 @@
obj-$(CONFIG_I2C_BOARDINFO) += i2c-boardinfo.o
obj-$(CONFIG_I2C) += i2c-core.o
+i2c-core-objs := i2c-core-base.o i2c-core-smbus.o
+i2c-core-$(CONFIG_ACPI) += i2c-core-acpi.o
+i2c-core-$(CONFIG_I2C_SLAVE) += i2c-core-slave.o
+i2c-core-$(CONFIG_OF) += i2c-core-of.o
+
obj-$(CONFIG_I2C_SMBUS) += i2c-smbus.o
obj-$(CONFIG_I2C_CHARDEV) += i2c-dev.o
obj-$(CONFIG_I2C_MUX) += i2c-mux.o
@@ -12,4 +17,4 @@
obj-$(CONFIG_I2C_SLAVE_EEPROM) += i2c-slave-eeprom.o
ccflags-$(CONFIG_I2C_DEBUG_CORE) := -DDEBUG
-CFLAGS_i2c-core.o := -Wno-deprecated-declarations
+CFLAGS_i2c-core-base.o := -Wno-deprecated-declarations
diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
index a8e89df..1147bdd 100644
--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -553,9 +553,16 @@
nak_ok = pmsg->flags & I2C_M_IGNORE_NAK;
if (!(pmsg->flags & I2C_M_NOSTART)) {
if (i) {
- bit_dbg(3, &i2c_adap->dev, "emitting "
- "repeated start condition\n");
- i2c_repstart(adap);
+ if (msgs[i - 1].flags & I2C_M_STOP) {
+ bit_dbg(3, &i2c_adap->dev,
+ "emitting enforced stop/start condition\n");
+ i2c_stop(adap);
+ i2c_start(adap);
+ } else {
+ bit_dbg(3, &i2c_adap->dev,
+ "emitting repeated start condition\n");
+ i2c_repstart(adap);
+ }
}
ret = bit_doAddress(i2c_adap, pmsg);
if ((ret != 0) && !nak_ok) {
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 144cbad..1006b23 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -129,6 +129,8 @@
Broxton (SOC)
Lewisburg (PCH)
Gemini Lake (SOC)
+ Cannon Lake-H (PCH)
+ Cannon Lake-LP (PCH)
This driver can also be built as a module. If so, the module
will be called i2c-i801.
@@ -326,6 +328,16 @@
comment "I2C system bus drivers (mostly embedded / system-on-chip)"
+config I2C_ASPEED
+ tristate "Aspeed I2C Controller"
+ depends on ARCH_ASPEED || COMPILE_TEST
+ help
+ If you say yes to this option, support will be included for the
+ Aspeed I2C controller.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-aspeed.
+
config I2C_AT91
tristate "Atmel AT91 I2C Two-Wire interface (TWI)"
depends on ARCH_AT91
@@ -474,11 +486,22 @@
depends on (ACPI && COMMON_CLK) || !ACPI
help
If you say yes to this option, support will be included for the
- Synopsys DesignWare I2C adapter. Only master mode is supported.
+ Synopsys DesignWare I2C adapter.
This driver can also be built as a module. If so, the module
will be called i2c-designware-platform.
+config I2C_DESIGNWARE_SLAVE
+ bool "Synopsys DesignWare Slave"
+ select I2C_SLAVE
+ depends on I2C_DESIGNWARE_PLATFORM
+ help
+ If you say yes to this option, support will be included for the
+ Synopsys DesignWare I2C slave adapter.
+
+ This is not a standalone module, this module compiles together with
+ i2c-designware-core.
+
config I2C_DESIGNWARE_PCI
tristate "Synopsys DesignWare PCI"
depends on PCI
@@ -1258,4 +1281,13 @@
This driver can also be built as a module. If so, the module will be
called as i2c-opal.
+config I2C_ZX2967
+ tristate "ZTE ZX2967 I2C support"
+ depends on ARCH_ZX
+ default y
+ help
+ Selecting this option will add ZX2967 I2C driver.
+ This driver can also be built as a module. If so, the module will be
+ called i2c-zx2967.
+
endmenu
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 30b6085..1b2fc81 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -29,6 +29,7 @@
obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o
# Embedded system I2C/SMBus host controller drivers
+obj-$(CONFIG_I2C_ASPEED) += i2c-aspeed.o
obj-$(CONFIG_I2C_AT91) += i2c-at91.o
obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o
obj-$(CONFIG_I2C_AXXIA) += i2c-axxia.o
@@ -40,6 +41,10 @@
obj-$(CONFIG_I2C_CPM) += i2c-cpm.o
obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o
obj-$(CONFIG_I2C_DESIGNWARE_CORE) += i2c-designware-core.o
+i2c-designware-core-objs := i2c-designware-common.o i2c-designware-master.o
+ifeq ($(CONFIG_I2C_DESIGNWARE_SLAVE),y)
+i2c-designware-core-objs += i2c-designware-slave.o
+endif
obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM) += i2c-designware-platform.o
i2c-designware-platform-objs := i2c-designware-platdrv.o
i2c-designware-platform-$(CONFIG_I2C_DESIGNWARE_BAYTRAIL) += i2c-designware-baytrail.o
@@ -102,6 +107,7 @@
obj-$(CONFIG_I2C_XLR) += i2c-xlr.o
obj-$(CONFIG_I2C_XLP9XX) += i2c-xlp9xx.o
obj-$(CONFIG_I2C_RCAR) += i2c-rcar.o
+obj-$(CONFIG_I2C_ZX2967) += i2c-zx2967.o
# External I2C/SMBus adapter drivers
obj-$(CONFIG_I2C_DIOLAN_U2C) += i2c-diolan-u2c.o
diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
new file mode 100644
index 0000000..f193483
--- /dev/null
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -0,0 +1,891 @@
+/*
+ * Aspeed 24XX/25XX I2C Controller.
+ *
+ * Copyright (C) 2012-2017 ASPEED Technology Inc.
+ * Copyright 2017 IBM Corporation
+ * Copyright 2017 Google, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+/* I2C Register */
+#define ASPEED_I2C_FUN_CTRL_REG 0x00
+#define ASPEED_I2C_AC_TIMING_REG1 0x04
+#define ASPEED_I2C_AC_TIMING_REG2 0x08
+#define ASPEED_I2C_INTR_CTRL_REG 0x0c
+#define ASPEED_I2C_INTR_STS_REG 0x10
+#define ASPEED_I2C_CMD_REG 0x14
+#define ASPEED_I2C_DEV_ADDR_REG 0x18
+#define ASPEED_I2C_BYTE_BUF_REG 0x20
+
+/* Global Register Definition */
+/* 0x00 : I2C Interrupt Status Register */
+/* 0x08 : I2C Interrupt Target Assignment */
+
+/* Device Register Definition */
+/* 0x00 : I2CD Function Control Register */
+#define ASPEED_I2CD_MULTI_MASTER_DIS BIT(15)
+#define ASPEED_I2CD_SDA_DRIVE_1T_EN BIT(8)
+#define ASPEED_I2CD_M_SDA_DRIVE_1T_EN BIT(7)
+#define ASPEED_I2CD_M_HIGH_SPEED_EN BIT(6)
+#define ASPEED_I2CD_SLAVE_EN BIT(1)
+#define ASPEED_I2CD_MASTER_EN BIT(0)
+
+/* 0x04 : I2CD Clock and AC Timing Control Register #1 */
+#define ASPEED_I2CD_TIME_SCL_HIGH_SHIFT 16
+#define ASPEED_I2CD_TIME_SCL_HIGH_MASK GENMASK(19, 16)
+#define ASPEED_I2CD_TIME_SCL_LOW_SHIFT 12
+#define ASPEED_I2CD_TIME_SCL_LOW_MASK GENMASK(15, 12)
+#define ASPEED_I2CD_TIME_BASE_DIVISOR_MASK GENMASK(3, 0)
+#define ASPEED_I2CD_TIME_SCL_REG_MAX GENMASK(3, 0)
+/* 0x08 : I2CD Clock and AC Timing Control Register #2 */
+#define ASPEED_NO_TIMEOUT_CTRL 0
+
+/* 0x0c : I2CD Interrupt Control Register &
+ * 0x10 : I2CD Interrupt Status Register
+ *
+ * These share bit definitions, so use the same values for the enable &
+ * status bits.
+ */
+#define ASPEED_I2CD_INTR_SDA_DL_TIMEOUT BIT(14)
+#define ASPEED_I2CD_INTR_BUS_RECOVER_DONE BIT(13)
+#define ASPEED_I2CD_INTR_SLAVE_MATCH BIT(7)
+#define ASPEED_I2CD_INTR_SCL_TIMEOUT BIT(6)
+#define ASPEED_I2CD_INTR_ABNORMAL BIT(5)
+#define ASPEED_I2CD_INTR_NORMAL_STOP BIT(4)
+#define ASPEED_I2CD_INTR_ARBIT_LOSS BIT(3)
+#define ASPEED_I2CD_INTR_RX_DONE BIT(2)
+#define ASPEED_I2CD_INTR_TX_NAK BIT(1)
+#define ASPEED_I2CD_INTR_TX_ACK BIT(0)
+#define ASPEED_I2CD_INTR_ALL \
+ (ASPEED_I2CD_INTR_SDA_DL_TIMEOUT | \
+ ASPEED_I2CD_INTR_BUS_RECOVER_DONE | \
+ ASPEED_I2CD_INTR_SCL_TIMEOUT | \
+ ASPEED_I2CD_INTR_ABNORMAL | \
+ ASPEED_I2CD_INTR_NORMAL_STOP | \
+ ASPEED_I2CD_INTR_ARBIT_LOSS | \
+ ASPEED_I2CD_INTR_RX_DONE | \
+ ASPEED_I2CD_INTR_TX_NAK | \
+ ASPEED_I2CD_INTR_TX_ACK)
+
+/* 0x14 : I2CD Command/Status Register */
+#define ASPEED_I2CD_SCL_LINE_STS BIT(18)
+#define ASPEED_I2CD_SDA_LINE_STS BIT(17)
+#define ASPEED_I2CD_BUS_BUSY_STS BIT(16)
+#define ASPEED_I2CD_BUS_RECOVER_CMD BIT(11)
+
+/* Command Bit */
+#define ASPEED_I2CD_M_STOP_CMD BIT(5)
+#define ASPEED_I2CD_M_S_RX_CMD_LAST BIT(4)
+#define ASPEED_I2CD_M_RX_CMD BIT(3)
+#define ASPEED_I2CD_S_TX_CMD BIT(2)
+#define ASPEED_I2CD_M_TX_CMD BIT(1)
+#define ASPEED_I2CD_M_START_CMD BIT(0)
+
+/* 0x18 : I2CD Slave Device Address Register */
+#define ASPEED_I2CD_DEV_ADDR_MASK GENMASK(6, 0)
+
+enum aspeed_i2c_master_state {
+ ASPEED_I2C_MASTER_START,
+ ASPEED_I2C_MASTER_TX_FIRST,
+ ASPEED_I2C_MASTER_TX,
+ ASPEED_I2C_MASTER_RX_FIRST,
+ ASPEED_I2C_MASTER_RX,
+ ASPEED_I2C_MASTER_STOP,
+ ASPEED_I2C_MASTER_INACTIVE,
+};
+
+enum aspeed_i2c_slave_state {
+ ASPEED_I2C_SLAVE_START,
+ ASPEED_I2C_SLAVE_READ_REQUESTED,
+ ASPEED_I2C_SLAVE_READ_PROCESSED,
+ ASPEED_I2C_SLAVE_WRITE_REQUESTED,
+ ASPEED_I2C_SLAVE_WRITE_RECEIVED,
+ ASPEED_I2C_SLAVE_STOP,
+};
+
+struct aspeed_i2c_bus {
+ struct i2c_adapter adap;
+ struct device *dev;
+ void __iomem *base;
+ /* Synchronizes I/O mem access to base. */
+ spinlock_t lock;
+ struct completion cmd_complete;
+ unsigned long parent_clk_frequency;
+ u32 bus_frequency;
+ /* Transaction state. */
+ enum aspeed_i2c_master_state master_state;
+ struct i2c_msg *msgs;
+ size_t buf_index;
+ size_t msgs_index;
+ size_t msgs_count;
+ bool send_stop;
+ int cmd_err;
+ /* Protected only by i2c_lock_bus */
+ int master_xfer_result;
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+ struct i2c_client *slave;
+ enum aspeed_i2c_slave_state slave_state;
+#endif /* CONFIG_I2C_SLAVE */
+};
+
+static int aspeed_i2c_reset(struct aspeed_i2c_bus *bus);
+
+static int aspeed_i2c_recover_bus(struct aspeed_i2c_bus *bus)
+{
+ unsigned long time_left, flags;
+ int ret = 0;
+ u32 command;
+
+ spin_lock_irqsave(&bus->lock, flags);
+ command = readl(bus->base + ASPEED_I2C_CMD_REG);
+
+ if (command & ASPEED_I2CD_SDA_LINE_STS) {
+ /* Bus is idle: no recovery needed. */
+ if (command & ASPEED_I2CD_SCL_LINE_STS)
+ goto out;
+ dev_dbg(bus->dev, "SCL hung (state %x), attempting recovery\n",
+ command);
+
+ reinit_completion(&bus->cmd_complete);
+ writel(ASPEED_I2CD_M_STOP_CMD, bus->base + ASPEED_I2C_CMD_REG);
+ spin_unlock_irqrestore(&bus->lock, flags);
+
+ time_left = wait_for_completion_timeout(
+ &bus->cmd_complete, bus->adap.timeout);
+
+ spin_lock_irqsave(&bus->lock, flags);
+ if (time_left == 0)
+ goto reset_out;
+ else if (bus->cmd_err)
+ goto reset_out;
+ /* Recovery failed. */
+ else if (!(readl(bus->base + ASPEED_I2C_CMD_REG) &
+ ASPEED_I2CD_SCL_LINE_STS))
+ goto reset_out;
+ /* Bus error. */
+ } else {
+ dev_dbg(bus->dev, "SDA hung (state %x), attempting recovery\n",
+ command);
+
+ reinit_completion(&bus->cmd_complete);
+ /* Writes 1 to 8 SCL clock cycles until SDA is released. */
+ writel(ASPEED_I2CD_BUS_RECOVER_CMD,
+ bus->base + ASPEED_I2C_CMD_REG);
+ spin_unlock_irqrestore(&bus->lock, flags);
+
+ time_left = wait_for_completion_timeout(
+ &bus->cmd_complete, bus->adap.timeout);
+
+ spin_lock_irqsave(&bus->lock, flags);
+ if (time_left == 0)
+ goto reset_out;
+ else if (bus->cmd_err)
+ goto reset_out;
+ /* Recovery failed. */
+ else if (!(readl(bus->base + ASPEED_I2C_CMD_REG) &
+ ASPEED_I2CD_SDA_LINE_STS))
+ goto reset_out;
+ }
+
+out:
+ spin_unlock_irqrestore(&bus->lock, flags);
+
+ return ret;
+
+reset_out:
+ spin_unlock_irqrestore(&bus->lock, flags);
+
+ return aspeed_i2c_reset(bus);
+}
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+static bool aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus)
+{
+ u32 command, irq_status, status_ack = 0;
+ struct i2c_client *slave = bus->slave;
+ bool irq_handled = true;
+ u8 value;
+
+ spin_lock(&bus->lock);
+ if (!slave) {
+ irq_handled = false;
+ goto out;
+ }
+
+ command = readl(bus->base + ASPEED_I2C_CMD_REG);
+ irq_status = readl(bus->base + ASPEED_I2C_INTR_STS_REG);
+
+ /* Slave was requested, restart state machine. */
+ if (irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH) {
+ status_ack |= ASPEED_I2CD_INTR_SLAVE_MATCH;
+ bus->slave_state = ASPEED_I2C_SLAVE_START;
+ }
+
+ /* Slave is not currently active, irq was for someone else. */
+ if (bus->slave_state == ASPEED_I2C_SLAVE_STOP) {
+ irq_handled = false;
+ goto out;
+ }
+
+ dev_dbg(bus->dev, "slave irq status 0x%08x, cmd 0x%08x\n",
+ irq_status, command);
+
+ /* Slave was sent something. */
+ if (irq_status & ASPEED_I2CD_INTR_RX_DONE) {
+ value = readl(bus->base + ASPEED_I2C_BYTE_BUF_REG) >> 8;
+ /* Handle address frame. */
+ if (bus->slave_state == ASPEED_I2C_SLAVE_START) {
+ if (value & 0x1)
+ bus->slave_state =
+ ASPEED_I2C_SLAVE_READ_REQUESTED;
+ else
+ bus->slave_state =
+ ASPEED_I2C_SLAVE_WRITE_REQUESTED;
+ }
+ status_ack |= ASPEED_I2CD_INTR_RX_DONE;
+ }
+
+ /* Slave was asked to stop. */
+ if (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) {
+ status_ack |= ASPEED_I2CD_INTR_NORMAL_STOP;
+ bus->slave_state = ASPEED_I2C_SLAVE_STOP;
+ }
+ if (irq_status & ASPEED_I2CD_INTR_TX_NAK) {
+ status_ack |= ASPEED_I2CD_INTR_TX_NAK;
+ bus->slave_state = ASPEED_I2C_SLAVE_STOP;
+ }
+
+ switch (bus->slave_state) {
+ case ASPEED_I2C_SLAVE_READ_REQUESTED:
+ if (irq_status & ASPEED_I2CD_INTR_TX_ACK)
+ dev_err(bus->dev, "Unexpected ACK on read request.\n");
+ bus->slave_state = ASPEED_I2C_SLAVE_READ_PROCESSED;
+
+ i2c_slave_event(slave, I2C_SLAVE_READ_REQUESTED, &value);
+ writel(value, bus->base + ASPEED_I2C_BYTE_BUF_REG);
+ writel(ASPEED_I2CD_S_TX_CMD, bus->base + ASPEED_I2C_CMD_REG);
+ break;
+ case ASPEED_I2C_SLAVE_READ_PROCESSED:
+ status_ack |= ASPEED_I2CD_INTR_TX_ACK;
+ if (!(irq_status & ASPEED_I2CD_INTR_TX_ACK))
+ dev_err(bus->dev,
+ "Expected ACK after processed read.\n");
+ i2c_slave_event(slave, I2C_SLAVE_READ_PROCESSED, &value);
+ writel(value, bus->base + ASPEED_I2C_BYTE_BUF_REG);
+ writel(ASPEED_I2CD_S_TX_CMD, bus->base + ASPEED_I2C_CMD_REG);
+ break;
+ case ASPEED_I2C_SLAVE_WRITE_REQUESTED:
+ bus->slave_state = ASPEED_I2C_SLAVE_WRITE_RECEIVED;
+ i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value);
+ break;
+ case ASPEED_I2C_SLAVE_WRITE_RECEIVED:
+ i2c_slave_event(slave, I2C_SLAVE_WRITE_RECEIVED, &value);
+ break;
+ case ASPEED_I2C_SLAVE_STOP:
+ i2c_slave_event(slave, I2C_SLAVE_STOP, &value);
+ break;
+ default:
+ dev_err(bus->dev, "unhandled slave_state: %d\n",
+ bus->slave_state);
+ break;
+ }
+
+ if (status_ack != irq_status)
+ dev_err(bus->dev,
+ "irq handled != irq. expected %x, but was %x\n",
+ irq_status, status_ack);
+ writel(status_ack, bus->base + ASPEED_I2C_INTR_STS_REG);
+
+out:
+ spin_unlock(&bus->lock);
+ return irq_handled;
+}
+#endif /* CONFIG_I2C_SLAVE */
+
+/* precondition: bus.lock has been acquired. */
+static void aspeed_i2c_do_start(struct aspeed_i2c_bus *bus)
+{
+ u32 command = ASPEED_I2CD_M_START_CMD | ASPEED_I2CD_M_TX_CMD;
+ struct i2c_msg *msg = &bus->msgs[bus->msgs_index];
+ u8 slave_addr = msg->addr << 1;
+
+ bus->master_state = ASPEED_I2C_MASTER_START;
+ bus->buf_index = 0;
+
+ if (msg->flags & I2C_M_RD) {
+ slave_addr |= 1;
+ command |= ASPEED_I2CD_M_RX_CMD;
+ /* Need to let the hardware know to NACK after RX. */
+ if (msg->len == 1 && !(msg->flags & I2C_M_RECV_LEN))
+ command |= ASPEED_I2CD_M_S_RX_CMD_LAST;
+ }
+
+ writel(slave_addr, bus->base + ASPEED_I2C_BYTE_BUF_REG);
+ writel(command, bus->base + ASPEED_I2C_CMD_REG);
+}
+
+/* precondition: bus.lock has been acquired. */
+static void aspeed_i2c_do_stop(struct aspeed_i2c_bus *bus)
+{
+ bus->master_state = ASPEED_I2C_MASTER_STOP;
+ writel(ASPEED_I2CD_M_STOP_CMD, bus->base + ASPEED_I2C_CMD_REG);
+}
+
+/* precondition: bus.lock has been acquired. */
+static void aspeed_i2c_next_msg_or_stop(struct aspeed_i2c_bus *bus)
+{
+ if (bus->msgs_index + 1 < bus->msgs_count) {
+ bus->msgs_index++;
+ aspeed_i2c_do_start(bus);
+ } else {
+ aspeed_i2c_do_stop(bus);
+ }
+}
+
+static int aspeed_i2c_is_irq_error(u32 irq_status)
+{
+ if (irq_status & ASPEED_I2CD_INTR_ARBIT_LOSS)
+ return -EAGAIN;
+ if (irq_status & (ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |
+ ASPEED_I2CD_INTR_SCL_TIMEOUT))
+ return -EBUSY;
+ if (irq_status & (ASPEED_I2CD_INTR_ABNORMAL))
+ return -EPROTO;
+
+ return 0;
+}
+
+static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
+{
+ u32 irq_status, status_ack = 0, command = 0;
+ struct i2c_msg *msg;
+ u8 recv_byte;
+ int ret;
+
+ spin_lock(&bus->lock);
+ irq_status = readl(bus->base + ASPEED_I2C_INTR_STS_REG);
+ /* Ack all interrupt bits. */
+ writel(irq_status, bus->base + ASPEED_I2C_INTR_STS_REG);
+
+ if (irq_status & ASPEED_I2CD_INTR_BUS_RECOVER_DONE) {
+ bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
+ status_ack |= ASPEED_I2CD_INTR_BUS_RECOVER_DONE;
+ goto out_complete;
+ }
+
+ /*
+ * We encountered an interrupt that reports an error: the hardware
+ * should clear the command queue effectively taking us back to the
+ * INACTIVE state.
+ */
+ ret = aspeed_i2c_is_irq_error(irq_status);
+ if (ret < 0) {
+ dev_dbg(bus->dev, "received error interrupt: 0x%08x",
+ irq_status);
+ bus->cmd_err = ret;
+ bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
+ goto out_complete;
+ }
+
+ /* We are in an invalid state; reset bus to a known state. */
+ if (!bus->msgs && bus->master_state != ASPEED_I2C_MASTER_STOP) {
+ dev_err(bus->dev, "bus in unknown state");
+ bus->cmd_err = -EIO;
+ aspeed_i2c_do_stop(bus);
+ goto out_no_complete;
+ }
+ msg = &bus->msgs[bus->msgs_index];
+
+ /*
+ * START is a special case because we still have to handle a subsequent
+ * TX or RX immediately after we handle it, so we handle it here and
+ * then update the state and handle the new state below.
+ */
+ if (bus->master_state == ASPEED_I2C_MASTER_START) {
+ if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) {
+ pr_devel("no slave present at %02x", msg->addr);
+ status_ack |= ASPEED_I2CD_INTR_TX_NAK;
+ bus->cmd_err = -ENXIO;
+ aspeed_i2c_do_stop(bus);
+ goto out_no_complete;
+ }
+ status_ack |= ASPEED_I2CD_INTR_TX_ACK;
+ if (msg->len == 0) { /* SMBUS_QUICK */
+ aspeed_i2c_do_stop(bus);
+ goto out_no_complete;
+ }
+ if (msg->flags & I2C_M_RD)
+ bus->master_state = ASPEED_I2C_MASTER_RX_FIRST;
+ else
+ bus->master_state = ASPEED_I2C_MASTER_TX_FIRST;
+ }
+
+ switch (bus->master_state) {
+ case ASPEED_I2C_MASTER_TX:
+ if (unlikely(irq_status & ASPEED_I2CD_INTR_TX_NAK)) {
+ dev_dbg(bus->dev, "slave NACKed TX");
+ status_ack |= ASPEED_I2CD_INTR_TX_NAK;
+ goto error_and_stop;
+ } else if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) {
+ dev_err(bus->dev, "slave failed to ACK TX");
+ goto error_and_stop;
+ }
+ status_ack |= ASPEED_I2CD_INTR_TX_ACK;
+ /* fallthrough intended */
+ case ASPEED_I2C_MASTER_TX_FIRST:
+ if (bus->buf_index < msg->len) {
+ bus->master_state = ASPEED_I2C_MASTER_TX;
+ writel(msg->buf[bus->buf_index++],
+ bus->base + ASPEED_I2C_BYTE_BUF_REG);
+ writel(ASPEED_I2CD_M_TX_CMD,
+ bus->base + ASPEED_I2C_CMD_REG);
+ } else {
+ aspeed_i2c_next_msg_or_stop(bus);
+ }
+ goto out_no_complete;
+ case ASPEED_I2C_MASTER_RX_FIRST:
+ /* RX may not have completed yet (only address cycle) */
+ if (!(irq_status & ASPEED_I2CD_INTR_RX_DONE))
+ goto out_no_complete;
+ /* fallthrough intended */
+ case ASPEED_I2C_MASTER_RX:
+ if (unlikely(!(irq_status & ASPEED_I2CD_INTR_RX_DONE))) {
+ dev_err(bus->dev, "master failed to RX");
+ goto error_and_stop;
+ }
+ status_ack |= ASPEED_I2CD_INTR_RX_DONE;
+
+ recv_byte = readl(bus->base + ASPEED_I2C_BYTE_BUF_REG) >> 8;
+ msg->buf[bus->buf_index++] = recv_byte;
+
+ if (msg->flags & I2C_M_RECV_LEN) {
+ if (unlikely(recv_byte > I2C_SMBUS_BLOCK_MAX)) {
+ bus->cmd_err = -EPROTO;
+ aspeed_i2c_do_stop(bus);
+ goto out_no_complete;
+ }
+ msg->len = recv_byte +
+ ((msg->flags & I2C_CLIENT_PEC) ? 2 : 1);
+ msg->flags &= ~I2C_M_RECV_LEN;
+ }
+
+ if (bus->buf_index < msg->len) {
+ bus->master_state = ASPEED_I2C_MASTER_RX;
+ command = ASPEED_I2CD_M_RX_CMD;
+ if (bus->buf_index + 1 == msg->len)
+ command |= ASPEED_I2CD_M_S_RX_CMD_LAST;
+ writel(command, bus->base + ASPEED_I2C_CMD_REG);
+ } else {
+ aspeed_i2c_next_msg_or_stop(bus);
+ }
+ goto out_no_complete;
+ case ASPEED_I2C_MASTER_STOP:
+ if (unlikely(!(irq_status & ASPEED_I2CD_INTR_NORMAL_STOP))) {
+ dev_err(bus->dev, "master failed to STOP");
+ bus->cmd_err = -EIO;
+ /* Do not STOP as we have already tried. */
+ } else {
+ status_ack |= ASPEED_I2CD_INTR_NORMAL_STOP;
+ }
+
+ bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
+ goto out_complete;
+ case ASPEED_I2C_MASTER_INACTIVE:
+ dev_err(bus->dev,
+ "master received interrupt 0x%08x, but is inactive",
+ irq_status);
+ bus->cmd_err = -EIO;
+ /* Do not STOP as we should be inactive. */
+ goto out_complete;
+ default:
+ WARN(1, "unknown master state\n");
+ bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
+ bus->cmd_err = -EINVAL;
+ goto out_complete;
+ }
+error_and_stop:
+ bus->cmd_err = -EIO;
+ aspeed_i2c_do_stop(bus);
+ goto out_no_complete;
+out_complete:
+ bus->msgs = NULL;
+ if (bus->cmd_err)
+ bus->master_xfer_result = bus->cmd_err;
+ else
+ bus->master_xfer_result = bus->msgs_index + 1;
+ complete(&bus->cmd_complete);
+out_no_complete:
+ if (irq_status != status_ack)
+ dev_err(bus->dev,
+ "irq handled != irq. expected 0x%08x, but was 0x%08x\n",
+ irq_status, status_ack);
+ spin_unlock(&bus->lock);
+ return !!irq_status;
+}
+
+static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id)
+{
+ struct aspeed_i2c_bus *bus = dev_id;
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+ if (aspeed_i2c_slave_irq(bus)) {
+ dev_dbg(bus->dev, "irq handled by slave.\n");
+ return IRQ_HANDLED;
+ }
+#endif /* CONFIG_I2C_SLAVE */
+
+ return aspeed_i2c_master_irq(bus) ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static int aspeed_i2c_master_xfer(struct i2c_adapter *adap,
+ struct i2c_msg *msgs, int num)
+{
+ struct aspeed_i2c_bus *bus = i2c_get_adapdata(adap);
+ unsigned long time_left, flags;
+ int ret = 0;
+
+ spin_lock_irqsave(&bus->lock, flags);
+ bus->cmd_err = 0;
+
+ /* If bus is busy, attempt recovery. We assume a single master
+ * environment.
+ */
+ if (readl(bus->base + ASPEED_I2C_CMD_REG) & ASPEED_I2CD_BUS_BUSY_STS) {
+ spin_unlock_irqrestore(&bus->lock, flags);
+ ret = aspeed_i2c_recover_bus(bus);
+ if (ret)
+ return ret;
+ spin_lock_irqsave(&bus->lock, flags);
+ }
+
+ bus->cmd_err = 0;
+ bus->msgs = msgs;
+ bus->msgs_index = 0;
+ bus->msgs_count = num;
+
+ reinit_completion(&bus->cmd_complete);
+ aspeed_i2c_do_start(bus);
+ spin_unlock_irqrestore(&bus->lock, flags);
+
+ time_left = wait_for_completion_timeout(&bus->cmd_complete,
+ bus->adap.timeout);
+
+ if (time_left == 0)
+ return -ETIMEDOUT;
+ else
+ return bus->master_xfer_result;
+}
+
+static u32 aspeed_i2c_functionality(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+/* precondition: bus.lock has been acquired. */
+static void __aspeed_i2c_reg_slave(struct aspeed_i2c_bus *bus, u16 slave_addr)
+{
+ u32 addr_reg_val, func_ctrl_reg_val;
+
+ /* Set slave addr. */
+ addr_reg_val = readl(bus->base + ASPEED_I2C_DEV_ADDR_REG);
+ addr_reg_val &= ~ASPEED_I2CD_DEV_ADDR_MASK;
+ addr_reg_val |= slave_addr & ASPEED_I2CD_DEV_ADDR_MASK;
+ writel(addr_reg_val, bus->base + ASPEED_I2C_DEV_ADDR_REG);
+
+ /* Turn on slave mode. */
+ func_ctrl_reg_val = readl(bus->base + ASPEED_I2C_FUN_CTRL_REG);
+ func_ctrl_reg_val |= ASPEED_I2CD_SLAVE_EN;
+ writel(func_ctrl_reg_val, bus->base + ASPEED_I2C_FUN_CTRL_REG);
+}
+
+static int aspeed_i2c_reg_slave(struct i2c_client *client)
+{
+ struct aspeed_i2c_bus *bus = i2c_get_adapdata(client->adapter);
+ unsigned long flags;
+
+ spin_lock_irqsave(&bus->lock, flags);
+ if (bus->slave) {
+ spin_unlock_irqrestore(&bus->lock, flags);
+ return -EINVAL;
+ }
+
+ __aspeed_i2c_reg_slave(bus, client->addr);
+
+ bus->slave = client;
+ bus->slave_state = ASPEED_I2C_SLAVE_STOP;
+ spin_unlock_irqrestore(&bus->lock, flags);
+
+ return 0;
+}
+
+static int aspeed_i2c_unreg_slave(struct i2c_client *client)
+{
+ struct aspeed_i2c_bus *bus = i2c_get_adapdata(client->adapter);
+ u32 func_ctrl_reg_val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&bus->lock, flags);
+ if (!bus->slave) {
+ spin_unlock_irqrestore(&bus->lock, flags);
+ return -EINVAL;
+ }
+
+ /* Turn off slave mode. */
+ func_ctrl_reg_val = readl(bus->base + ASPEED_I2C_FUN_CTRL_REG);
+ func_ctrl_reg_val &= ~ASPEED_I2CD_SLAVE_EN;
+ writel(func_ctrl_reg_val, bus->base + ASPEED_I2C_FUN_CTRL_REG);
+
+ bus->slave = NULL;
+ spin_unlock_irqrestore(&bus->lock, flags);
+
+ return 0;
+}
+#endif /* CONFIG_I2C_SLAVE */
+
+static const struct i2c_algorithm aspeed_i2c_algo = {
+ .master_xfer = aspeed_i2c_master_xfer,
+ .functionality = aspeed_i2c_functionality,
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+ .reg_slave = aspeed_i2c_reg_slave,
+ .unreg_slave = aspeed_i2c_unreg_slave,
+#endif /* CONFIG_I2C_SLAVE */
+};
+
+static u32 aspeed_i2c_get_clk_reg_val(u32 divisor)
+{
+ u32 base_clk, clk_high, clk_low, tmp;
+
+ /*
+ * The actual clock frequency of SCL is:
+ * SCL_freq = APB_freq / (base_freq * (SCL_high + SCL_low))
+ * = APB_freq / divisor
+ * where base_freq is a programmable clock divider; its value is
+ * base_freq = 1 << base_clk
+ * SCL_high is the number of base_freq clock cycles that SCL stays high
+ * and SCL_low is the number of base_freq clock cycles that SCL stays
+ * low for a period of SCL.
+ * The actual register has a minimum SCL_high and SCL_low minimum of 1;
+ * thus, they start counting at zero. So
+ * SCL_high = clk_high + 1
+ * SCL_low = clk_low + 1
+ * Thus,
+ * SCL_freq = APB_freq /
+ * ((1 << base_clk) * (clk_high + 1 + clk_low + 1))
+ * The documentation recommends clk_high >= 8 and clk_low >= 7 when
+ * possible; this last constraint gives us the following solution:
+ */
+ base_clk = divisor > 33 ? ilog2((divisor - 1) / 32) + 1 : 0;
+ tmp = divisor / (1 << base_clk);
+ clk_high = tmp / 2 + tmp % 2;
+ clk_low = tmp - clk_high;
+
+ clk_high -= 1;
+ clk_low -= 1;
+
+ return ((clk_high << ASPEED_I2CD_TIME_SCL_HIGH_SHIFT)
+ & ASPEED_I2CD_TIME_SCL_HIGH_MASK)
+ | ((clk_low << ASPEED_I2CD_TIME_SCL_LOW_SHIFT)
+ & ASPEED_I2CD_TIME_SCL_LOW_MASK)
+ | (base_clk & ASPEED_I2CD_TIME_BASE_DIVISOR_MASK);
+}
+
+/* precondition: bus.lock has been acquired. */
+static int aspeed_i2c_init_clk(struct aspeed_i2c_bus *bus)
+{
+ u32 divisor, clk_reg_val;
+
+ divisor = bus->parent_clk_frequency / bus->bus_frequency;
+ clk_reg_val = aspeed_i2c_get_clk_reg_val(divisor);
+ writel(clk_reg_val, bus->base + ASPEED_I2C_AC_TIMING_REG1);
+ writel(ASPEED_NO_TIMEOUT_CTRL, bus->base + ASPEED_I2C_AC_TIMING_REG2);
+
+ return 0;
+}
+
+/* precondition: bus.lock has been acquired. */
+static int aspeed_i2c_init(struct aspeed_i2c_bus *bus,
+ struct platform_device *pdev)
+{
+ u32 fun_ctrl_reg = ASPEED_I2CD_MASTER_EN;
+ int ret;
+
+ /* Disable everything. */
+ writel(0, bus->base + ASPEED_I2C_FUN_CTRL_REG);
+
+ ret = aspeed_i2c_init_clk(bus);
+ if (ret < 0)
+ return ret;
+
+ if (!of_property_read_bool(pdev->dev.of_node, "multi-master"))
+ fun_ctrl_reg |= ASPEED_I2CD_MULTI_MASTER_DIS;
+
+ /* Enable Master Mode */
+ writel(readl(bus->base + ASPEED_I2C_FUN_CTRL_REG) | fun_ctrl_reg,
+ bus->base + ASPEED_I2C_FUN_CTRL_REG);
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+ /* If slave has already been registered, re-enable it. */
+ if (bus->slave)
+ __aspeed_i2c_reg_slave(bus, bus->slave->addr);
+#endif /* CONFIG_I2C_SLAVE */
+
+ /* Set interrupt generation of I2C controller */
+ writel(ASPEED_I2CD_INTR_ALL, bus->base + ASPEED_I2C_INTR_CTRL_REG);
+
+ return 0;
+}
+
+static int aspeed_i2c_reset(struct aspeed_i2c_bus *bus)
+{
+ struct platform_device *pdev = to_platform_device(bus->dev);
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&bus->lock, flags);
+
+ /* Disable and ack all interrupts. */
+ writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG);
+ writel(0xffffffff, bus->base + ASPEED_I2C_INTR_STS_REG);
+
+ ret = aspeed_i2c_init(bus, pdev);
+
+ spin_unlock_irqrestore(&bus->lock, flags);
+
+ return ret;
+}
+
+static int aspeed_i2c_probe_bus(struct platform_device *pdev)
+{
+ struct aspeed_i2c_bus *bus;
+ struct clk *parent_clk;
+ struct resource *res;
+ int irq, ret;
+
+ bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL);
+ if (!bus)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ bus->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(bus->base))
+ return PTR_ERR(bus->base);
+
+ parent_clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(parent_clk))
+ return PTR_ERR(parent_clk);
+ bus->parent_clk_frequency = clk_get_rate(parent_clk);
+ /* We just need the clock rate, we don't actually use the clk object. */
+ devm_clk_put(&pdev->dev, parent_clk);
+
+ ret = of_property_read_u32(pdev->dev.of_node,
+ "bus-frequency", &bus->bus_frequency);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "Could not read bus-frequency property\n");
+ bus->bus_frequency = 100000;
+ }
+
+ /* Initialize the I2C adapter */
+ spin_lock_init(&bus->lock);
+ init_completion(&bus->cmd_complete);
+ bus->adap.owner = THIS_MODULE;
+ bus->adap.retries = 0;
+ bus->adap.timeout = 5 * HZ;
+ bus->adap.algo = &aspeed_i2c_algo;
+ bus->adap.dev.parent = &pdev->dev;
+ bus->adap.dev.of_node = pdev->dev.of_node;
+ strlcpy(bus->adap.name, pdev->name, sizeof(bus->adap.name));
+ i2c_set_adapdata(&bus->adap, bus);
+
+ bus->dev = &pdev->dev;
+
+ /* Clean up any left over interrupt state. */
+ writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG);
+ writel(0xffffffff, bus->base + ASPEED_I2C_INTR_STS_REG);
+ /*
+ * bus.lock does not need to be held because the interrupt handler has
+ * not been enabled yet.
+ */
+ ret = aspeed_i2c_init(bus, pdev);
+ if (ret < 0)
+ return ret;
+
+ irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+ ret = devm_request_irq(&pdev->dev, irq, aspeed_i2c_bus_irq,
+ 0, dev_name(&pdev->dev), bus);
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_add_adapter(&bus->adap);
+ if (ret < 0)
+ return ret;
+
+ platform_set_drvdata(pdev, bus);
+
+ dev_info(bus->dev, "i2c bus %d registered, irq %d\n",
+ bus->adap.nr, irq);
+
+ return 0;
+}
+
+static int aspeed_i2c_remove_bus(struct platform_device *pdev)
+{
+ struct aspeed_i2c_bus *bus = platform_get_drvdata(pdev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&bus->lock, flags);
+
+ /* Disable everything. */
+ writel(0, bus->base + ASPEED_I2C_FUN_CTRL_REG);
+ writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG);
+
+ spin_unlock_irqrestore(&bus->lock, flags);
+
+ i2c_del_adapter(&bus->adap);
+
+ return 0;
+}
+
+static const struct of_device_id aspeed_i2c_bus_of_table[] = {
+ { .compatible = "aspeed,ast2400-i2c-bus", },
+ { .compatible = "aspeed,ast2500-i2c-bus", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, aspeed_i2c_bus_of_table);
+
+static struct platform_driver aspeed_i2c_bus_driver = {
+ .probe = aspeed_i2c_probe_bus,
+ .remove = aspeed_i2c_remove_bus,
+ .driver = {
+ .name = "aspeed-i2c-bus",
+ .of_match_table = aspeed_i2c_bus_of_table,
+ },
+};
+module_platform_driver(aspeed_i2c_bus_driver);
+
+MODULE_AUTHOR("Brendan Higgins <brendanhiggins@google.com>");
+MODULE_DESCRIPTION("Aspeed I2C Bus Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index fabbb9e..38dd61d 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -274,7 +274,7 @@
if (!dev->use_alt_cmd)
at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
- dev_dbg(dev->dev, "wrote 0x%x, to go %d\n", *dev->buf, dev->buf_len);
+ dev_dbg(dev->dev, "wrote 0x%x, to go %zu\n", *dev->buf, dev->buf_len);
++dev->buf;
}
@@ -402,7 +402,7 @@
dev->msg->flags &= ~I2C_M_RECV_LEN;
dev->buf_len += *dev->buf;
dev->msg->len = dev->buf_len + 1;
- dev_dbg(dev->dev, "received block length %d\n",
+ dev_dbg(dev->dev, "received block length %zu\n",
dev->buf_len);
} else {
/* abort and send the stop by reading one more byte */
@@ -415,7 +415,7 @@
if (!dev->use_alt_cmd && dev->buf_len == 1)
at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
- dev_dbg(dev->dev, "read 0x%x, to go %d\n", *dev->buf, dev->buf_len);
+ dev_dbg(dev->dev, "read 0x%x, to go %zu\n", *dev->buf, dev->buf_len);
++dev->buf;
}
@@ -622,7 +622,7 @@
* writing the corresponding bit into the Control Register.
*/
- dev_dbg(dev->dev, "transfer: %s %d bytes.\n",
+ dev_dbg(dev->dev, "transfer: %s %zu bytes.\n",
(dev->msg->flags & I2C_M_RD) ? "read" : "write", dev->buf_len);
reinit_completion(&dev->cmd_complete);
@@ -1083,12 +1083,16 @@
dev_err(dev->dev, "no clock defined\n");
return -ENODEV;
}
- clk_prepare_enable(dev->clk);
+ rc = clk_prepare_enable(dev->clk);
+ if (rc)
+ return rc;
if (dev->dev->of_node) {
rc = at91_twi_configure_dma(dev, phy_addr);
- if (rc == -EPROBE_DEFER)
+ if (rc == -EPROBE_DEFER) {
+ clk_disable_unprepare(dev->clk);
return rc;
+ }
}
if (!of_property_read_u32(pdev->dev.of_node, "atmel,fifo-size",
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
index 45d6771..75d8016 100644
--- a/drivers/i2c/busses/i2c-cadence.c
+++ b/drivers/i2c/busses/i2c-cadence.c
@@ -405,14 +405,14 @@
cdns_i2c_writereg(id->recv_count, CDNS_I2C_XFER_SIZE_OFFSET);
}
+ /* Set the slave address in address register - triggers operation */
+ cdns_i2c_writereg(id->p_msg->addr & CDNS_I2C_ADDR_MASK,
+ CDNS_I2C_ADDR_OFFSET);
/* Clear the bus hold flag if bytes to receive is less than FIFO size */
if (!id->bus_hold_flag &&
((id->p_msg->flags & I2C_M_RECV_LEN) != I2C_M_RECV_LEN) &&
(id->recv_count <= CDNS_I2C_FIFO_DEPTH))
cdns_i2c_clear_bus_hold(id);
- /* Set the slave address in address register - triggers operation */
- cdns_i2c_writereg(id->p_msg->addr & CDNS_I2C_ADDR_MASK,
- CDNS_I2C_ADDR_OFFSET);
cdns_i2c_writereg(CDNS_I2C_ENABLED_INTR_MASK, CDNS_I2C_IER_OFFSET);
}
diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
new file mode 100644
index 0000000..d1a6937
--- /dev/null
+++ b/drivers/i2c/busses/i2c-designware-common.c
@@ -0,0 +1,281 @@
+/*
+ * Synopsys DesignWare I2C adapter driver.
+ *
+ * Based on the TI DAVINCI I2C adapter driver.
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2007 MontaVista Software Inc.
+ * Copyright (C) 2009 Provigent Ltd.
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ * ----------------------------------------------------------------------------
+ *
+ */
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+
+#include "i2c-designware-core.h"
+
+static char *abort_sources[] = {
+ [ABRT_7B_ADDR_NOACK] =
+ "slave address not acknowledged (7bit mode)",
+ [ABRT_10ADDR1_NOACK] =
+ "first address byte not acknowledged (10bit mode)",
+ [ABRT_10ADDR2_NOACK] =
+ "second address byte not acknowledged (10bit mode)",
+ [ABRT_TXDATA_NOACK] =
+ "data not acknowledged",
+ [ABRT_GCALL_NOACK] =
+ "no acknowledgement for a general call",
+ [ABRT_GCALL_READ] =
+ "read after general call",
+ [ABRT_SBYTE_ACKDET] =
+ "start byte acknowledged",
+ [ABRT_SBYTE_NORSTRT] =
+ "trying to send start byte when restart is disabled",
+ [ABRT_10B_RD_NORSTRT] =
+ "trying to read when restart is disabled (10bit mode)",
+ [ABRT_MASTER_DIS] =
+ "trying to use disabled adapter",
+ [ARB_LOST] =
+ "lost arbitration",
+ [ABRT_SLAVE_FLUSH_TXFIFO] =
+ "read command so flush old data in the TX FIFO",
+ [ABRT_SLAVE_ARBLOST] =
+ "slave lost the bus while transmitting data to a remote master",
+ [ABRT_SLAVE_RD_INTX] =
+ "incorrect slave-transmitter mode configuration",
+};
+
+u32 dw_readl(struct dw_i2c_dev *dev, int offset)
+{
+ u32 value;
+
+ if (dev->flags & ACCESS_16BIT)
+ value = readw_relaxed(dev->base + offset) |
+ (readw_relaxed(dev->base + offset + 2) << 16);
+ else
+ value = readl_relaxed(dev->base + offset);
+
+ if (dev->flags & ACCESS_SWAP)
+ return swab32(value);
+ else
+ return value;
+}
+
+void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset)
+{
+ if (dev->flags & ACCESS_SWAP)
+ b = swab32(b);
+
+ if (dev->flags & ACCESS_16BIT) {
+ writew_relaxed((u16)b, dev->base + offset);
+ writew_relaxed((u16)(b >> 16), dev->base + offset + 2);
+ } else {
+ writel_relaxed(b, dev->base + offset);
+ }
+}
+
+u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset)
+{
+ /*
+ * DesignWare I2C core doesn't seem to have solid strategy to meet
+ * the tHD;STA timing spec. Configuring _HCNT based on tHIGH spec
+ * will result in violation of the tHD;STA spec.
+ */
+ if (cond)
+ /*
+ * Conditional expression:
+ *
+ * IC_[FS]S_SCL_HCNT + (1+4+3) >= IC_CLK * tHIGH
+ *
+ * This is based on the DW manuals, and represents an ideal
+ * configuration. The resulting I2C bus speed will be
+ * faster than any of the others.
+ *
+ * If your hardware is free from tHD;STA issue, try this one.
+ */
+ return (ic_clk * tSYMBOL + 500000) / 1000000 - 8 + offset;
+ else
+ /*
+ * Conditional expression:
+ *
+ * IC_[FS]S_SCL_HCNT + 3 >= IC_CLK * (tHD;STA + tf)
+ *
+ * This is just experimental rule; the tHD;STA period turned
+ * out to be proportinal to (_HCNT + 3). With this setting,
+ * we could meet both tHIGH and tHD;STA timing specs.
+ *
+ * If unsure, you'd better to take this alternative.
+ *
+ * The reason why we need to take into account "tf" here,
+ * is the same as described in i2c_dw_scl_lcnt().
+ */
+ return (ic_clk * (tSYMBOL + tf) + 500000) / 1000000
+ - 3 + offset;
+}
+
+u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset)
+{
+ /*
+ * Conditional expression:
+ *
+ * IC_[FS]S_SCL_LCNT + 1 >= IC_CLK * (tLOW + tf)
+ *
+ * DW I2C core starts counting the SCL CNTs for the LOW period
+ * of the SCL clock (tLOW) as soon as it pulls the SCL line.
+ * In order to meet the tLOW timing spec, we need to take into
+ * account the fall time of SCL signal (tf). Default tf value
+ * should be 0.3 us, for safety.
+ */
+ return ((ic_clk * (tLOW + tf) + 500000) / 1000000) - 1 + offset;
+}
+
+void __i2c_dw_enable(struct dw_i2c_dev *dev, bool enable)
+{
+ dw_writel(dev, enable, DW_IC_ENABLE);
+}
+
+void __i2c_dw_enable_and_wait(struct dw_i2c_dev *dev, bool enable)
+{
+ int timeout = 100;
+
+ do {
+ __i2c_dw_enable(dev, enable);
+ if ((dw_readl(dev, DW_IC_ENABLE_STATUS) & 1) == enable)
+ return;
+
+ /*
+ * Wait 10 times the signaling period of the highest I2C
+ * transfer supported by the driver (for 400KHz this is
+ * 25us) as described in the DesignWare I2C databook.
+ */
+ usleep_range(25, 250);
+ } while (timeout--);
+
+ dev_warn(dev->dev, "timeout in %sabling adapter\n",
+ enable ? "en" : "dis");
+}
+
+unsigned long i2c_dw_clk_rate(struct dw_i2c_dev *dev)
+{
+ /*
+ * Clock is not necessary if we got LCNT/HCNT values directly from
+ * the platform code.
+ */
+ if (WARN_ON_ONCE(!dev->get_clk_rate_khz))
+ return 0;
+ return dev->get_clk_rate_khz(dev);
+}
+
+int i2c_dw_acquire_lock(struct dw_i2c_dev *dev)
+{
+ int ret;
+
+ if (!dev->acquire_lock)
+ return 0;
+
+ ret = dev->acquire_lock(dev);
+ if (!ret)
+ return 0;
+
+ dev_err(dev->dev, "couldn't acquire bus ownership\n");
+
+ return ret;
+}
+
+void i2c_dw_release_lock(struct dw_i2c_dev *dev)
+{
+ if (dev->release_lock)
+ dev->release_lock(dev);
+}
+
+/*
+ * Waiting for bus not busy
+ */
+int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev)
+{
+ int timeout = TIMEOUT;
+
+ while (dw_readl(dev, DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) {
+ if (timeout <= 0) {
+ dev_warn(dev->dev, "timeout waiting for bus ready\n");
+ return -ETIMEDOUT;
+ }
+ timeout--;
+ usleep_range(1000, 1100);
+ }
+
+ return 0;
+}
+
+int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev)
+{
+ unsigned long abort_source = dev->abort_source;
+ int i;
+
+ if (abort_source & DW_IC_TX_ABRT_NOACK) {
+ for_each_set_bit(i, &abort_source, ARRAY_SIZE(abort_sources))
+ dev_dbg(dev->dev,
+ "%s: %s\n", __func__, abort_sources[i]);
+ return -EREMOTEIO;
+ }
+
+ for_each_set_bit(i, &abort_source, ARRAY_SIZE(abort_sources))
+ dev_err(dev->dev, "%s: %s\n", __func__, abort_sources[i]);
+
+ if (abort_source & DW_IC_TX_ARB_LOST)
+ return -EAGAIN;
+ else if (abort_source & DW_IC_TX_ABRT_GCALL_READ)
+ return -EINVAL; /* wrong msgs[] data */
+ else
+ return -EIO;
+}
+
+u32 i2c_dw_func(struct i2c_adapter *adap)
+{
+ struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
+
+ return dev->functionality;
+}
+
+void i2c_dw_disable(struct dw_i2c_dev *dev)
+{
+ /* Disable controller */
+ __i2c_dw_enable_and_wait(dev, false);
+
+ /* Disable all interupts */
+ dw_writel(dev, 0, DW_IC_INTR_MASK);
+ dw_readl(dev, DW_IC_CLR_INTR);
+}
+
+void i2c_dw_disable_int(struct dw_i2c_dev *dev)
+{
+ dw_writel(dev, 0, DW_IC_INTR_MASK);
+}
+
+u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev)
+{
+ return dw_readl(dev, DW_IC_COMP_PARAM_1);
+}
+EXPORT_SYMBOL_GPL(i2c_dw_read_comp_param);
+
+MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter core");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
deleted file mode 100644
index c453717..0000000
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ /dev/null
@@ -1,1012 +0,0 @@
-/*
- * Synopsys DesignWare I2C adapter driver (master only).
- *
- * Based on the TI DAVINCI I2C adapter driver.
- *
- * Copyright (C) 2006 Texas Instruments.
- * Copyright (C) 2007 MontaVista Software Inc.
- * Copyright (C) 2009 Provigent Ltd.
- *
- * ----------------------------------------------------------------------------
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- * ----------------------------------------------------------------------------
- *
- */
-#include <linux/export.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/i2c.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/pm_runtime.h>
-#include <linux/delay.h>
-#include <linux/module.h>
-#include "i2c-designware-core.h"
-
-/*
- * Registers offset
- */
-#define DW_IC_CON 0x0
-#define DW_IC_TAR 0x4
-#define DW_IC_DATA_CMD 0x10
-#define DW_IC_SS_SCL_HCNT 0x14
-#define DW_IC_SS_SCL_LCNT 0x18
-#define DW_IC_FS_SCL_HCNT 0x1c
-#define DW_IC_FS_SCL_LCNT 0x20
-#define DW_IC_HS_SCL_HCNT 0x24
-#define DW_IC_HS_SCL_LCNT 0x28
-#define DW_IC_INTR_STAT 0x2c
-#define DW_IC_INTR_MASK 0x30
-#define DW_IC_RAW_INTR_STAT 0x34
-#define DW_IC_RX_TL 0x38
-#define DW_IC_TX_TL 0x3c
-#define DW_IC_CLR_INTR 0x40
-#define DW_IC_CLR_RX_UNDER 0x44
-#define DW_IC_CLR_RX_OVER 0x48
-#define DW_IC_CLR_TX_OVER 0x4c
-#define DW_IC_CLR_RD_REQ 0x50
-#define DW_IC_CLR_TX_ABRT 0x54
-#define DW_IC_CLR_RX_DONE 0x58
-#define DW_IC_CLR_ACTIVITY 0x5c
-#define DW_IC_CLR_STOP_DET 0x60
-#define DW_IC_CLR_START_DET 0x64
-#define DW_IC_CLR_GEN_CALL 0x68
-#define DW_IC_ENABLE 0x6c
-#define DW_IC_STATUS 0x70
-#define DW_IC_TXFLR 0x74
-#define DW_IC_RXFLR 0x78
-#define DW_IC_SDA_HOLD 0x7c
-#define DW_IC_TX_ABRT_SOURCE 0x80
-#define DW_IC_ENABLE_STATUS 0x9c
-#define DW_IC_COMP_PARAM_1 0xf4
-#define DW_IC_COMP_VERSION 0xf8
-#define DW_IC_SDA_HOLD_MIN_VERS 0x3131312A
-#define DW_IC_COMP_TYPE 0xfc
-#define DW_IC_COMP_TYPE_VALUE 0x44570140
-
-#define DW_IC_INTR_RX_UNDER 0x001
-#define DW_IC_INTR_RX_OVER 0x002
-#define DW_IC_INTR_RX_FULL 0x004
-#define DW_IC_INTR_TX_OVER 0x008
-#define DW_IC_INTR_TX_EMPTY 0x010
-#define DW_IC_INTR_RD_REQ 0x020
-#define DW_IC_INTR_TX_ABRT 0x040
-#define DW_IC_INTR_RX_DONE 0x080
-#define DW_IC_INTR_ACTIVITY 0x100
-#define DW_IC_INTR_STOP_DET 0x200
-#define DW_IC_INTR_START_DET 0x400
-#define DW_IC_INTR_GEN_CALL 0x800
-
-#define DW_IC_INTR_DEFAULT_MASK (DW_IC_INTR_RX_FULL | \
- DW_IC_INTR_TX_EMPTY | \
- DW_IC_INTR_TX_ABRT | \
- DW_IC_INTR_STOP_DET)
-
-#define DW_IC_STATUS_ACTIVITY 0x1
-
-#define DW_IC_SDA_HOLD_RX_SHIFT 16
-#define DW_IC_SDA_HOLD_RX_MASK GENMASK(23, DW_IC_SDA_HOLD_RX_SHIFT)
-
-#define DW_IC_ERR_TX_ABRT 0x1
-
-#define DW_IC_TAR_10BITADDR_MASTER BIT(12)
-
-#define DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH (BIT(2) | BIT(3))
-#define DW_IC_COMP_PARAM_1_SPEED_MODE_MASK GENMASK(3, 2)
-
-/*
- * status codes
- */
-#define STATUS_IDLE 0x0
-#define STATUS_WRITE_IN_PROGRESS 0x1
-#define STATUS_READ_IN_PROGRESS 0x2
-
-#define TIMEOUT 20 /* ms */
-
-/*
- * hardware abort codes from the DW_IC_TX_ABRT_SOURCE register
- *
- * only expected abort codes are listed here
- * refer to the datasheet for the full list
- */
-#define ABRT_7B_ADDR_NOACK 0
-#define ABRT_10ADDR1_NOACK 1
-#define ABRT_10ADDR2_NOACK 2
-#define ABRT_TXDATA_NOACK 3
-#define ABRT_GCALL_NOACK 4
-#define ABRT_GCALL_READ 5
-#define ABRT_SBYTE_ACKDET 7
-#define ABRT_SBYTE_NORSTRT 9
-#define ABRT_10B_RD_NORSTRT 10
-#define ABRT_MASTER_DIS 11
-#define ARB_LOST 12
-
-#define DW_IC_TX_ABRT_7B_ADDR_NOACK (1UL << ABRT_7B_ADDR_NOACK)
-#define DW_IC_TX_ABRT_10ADDR1_NOACK (1UL << ABRT_10ADDR1_NOACK)
-#define DW_IC_TX_ABRT_10ADDR2_NOACK (1UL << ABRT_10ADDR2_NOACK)
-#define DW_IC_TX_ABRT_TXDATA_NOACK (1UL << ABRT_TXDATA_NOACK)
-#define DW_IC_TX_ABRT_GCALL_NOACK (1UL << ABRT_GCALL_NOACK)
-#define DW_IC_TX_ABRT_GCALL_READ (1UL << ABRT_GCALL_READ)
-#define DW_IC_TX_ABRT_SBYTE_ACKDET (1UL << ABRT_SBYTE_ACKDET)
-#define DW_IC_TX_ABRT_SBYTE_NORSTRT (1UL << ABRT_SBYTE_NORSTRT)
-#define DW_IC_TX_ABRT_10B_RD_NORSTRT (1UL << ABRT_10B_RD_NORSTRT)
-#define DW_IC_TX_ABRT_MASTER_DIS (1UL << ABRT_MASTER_DIS)
-#define DW_IC_TX_ARB_LOST (1UL << ARB_LOST)
-
-#define DW_IC_TX_ABRT_NOACK (DW_IC_TX_ABRT_7B_ADDR_NOACK | \
- DW_IC_TX_ABRT_10ADDR1_NOACK | \
- DW_IC_TX_ABRT_10ADDR2_NOACK | \
- DW_IC_TX_ABRT_TXDATA_NOACK | \
- DW_IC_TX_ABRT_GCALL_NOACK)
-
-static char *abort_sources[] = {
- [ABRT_7B_ADDR_NOACK] =
- "slave address not acknowledged (7bit mode)",
- [ABRT_10ADDR1_NOACK] =
- "first address byte not acknowledged (10bit mode)",
- [ABRT_10ADDR2_NOACK] =
- "second address byte not acknowledged (10bit mode)",
- [ABRT_TXDATA_NOACK] =
- "data not acknowledged",
- [ABRT_GCALL_NOACK] =
- "no acknowledgement for a general call",
- [ABRT_GCALL_READ] =
- "read after general call",
- [ABRT_SBYTE_ACKDET] =
- "start byte acknowledged",
- [ABRT_SBYTE_NORSTRT] =
- "trying to send start byte when restart is disabled",
- [ABRT_10B_RD_NORSTRT] =
- "trying to read when restart is disabled (10bit mode)",
- [ABRT_MASTER_DIS] =
- "trying to use disabled adapter",
- [ARB_LOST] =
- "lost arbitration",
-};
-
-static u32 dw_readl(struct dw_i2c_dev *dev, int offset)
-{
- u32 value;
-
- if (dev->flags & ACCESS_16BIT)
- value = readw_relaxed(dev->base + offset) |
- (readw_relaxed(dev->base + offset + 2) << 16);
- else
- value = readl_relaxed(dev->base + offset);
-
- if (dev->flags & ACCESS_SWAP)
- return swab32(value);
- else
- return value;
-}
-
-static void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset)
-{
- if (dev->flags & ACCESS_SWAP)
- b = swab32(b);
-
- if (dev->flags & ACCESS_16BIT) {
- writew_relaxed((u16)b, dev->base + offset);
- writew_relaxed((u16)(b >> 16), dev->base + offset + 2);
- } else {
- writel_relaxed(b, dev->base + offset);
- }
-}
-
-static u32
-i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset)
-{
- /*
- * DesignWare I2C core doesn't seem to have solid strategy to meet
- * the tHD;STA timing spec. Configuring _HCNT based on tHIGH spec
- * will result in violation of the tHD;STA spec.
- */
- if (cond)
- /*
- * Conditional expression:
- *
- * IC_[FS]S_SCL_HCNT + (1+4+3) >= IC_CLK * tHIGH
- *
- * This is based on the DW manuals, and represents an ideal
- * configuration. The resulting I2C bus speed will be
- * faster than any of the others.
- *
- * If your hardware is free from tHD;STA issue, try this one.
- */
- return (ic_clk * tSYMBOL + 500000) / 1000000 - 8 + offset;
- else
- /*
- * Conditional expression:
- *
- * IC_[FS]S_SCL_HCNT + 3 >= IC_CLK * (tHD;STA + tf)
- *
- * This is just experimental rule; the tHD;STA period turned
- * out to be proportinal to (_HCNT + 3). With this setting,
- * we could meet both tHIGH and tHD;STA timing specs.
- *
- * If unsure, you'd better to take this alternative.
- *
- * The reason why we need to take into account "tf" here,
- * is the same as described in i2c_dw_scl_lcnt().
- */
- return (ic_clk * (tSYMBOL + tf) + 500000) / 1000000
- - 3 + offset;
-}
-
-static u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset)
-{
- /*
- * Conditional expression:
- *
- * IC_[FS]S_SCL_LCNT + 1 >= IC_CLK * (tLOW + tf)
- *
- * DW I2C core starts counting the SCL CNTs for the LOW period
- * of the SCL clock (tLOW) as soon as it pulls the SCL line.
- * In order to meet the tLOW timing spec, we need to take into
- * account the fall time of SCL signal (tf). Default tf value
- * should be 0.3 us, for safety.
- */
- return ((ic_clk * (tLOW + tf) + 500000) / 1000000) - 1 + offset;
-}
-
-static void __i2c_dw_enable(struct dw_i2c_dev *dev, bool enable)
-{
- dw_writel(dev, enable, DW_IC_ENABLE);
-}
-
-static void __i2c_dw_enable_and_wait(struct dw_i2c_dev *dev, bool enable)
-{
- int timeout = 100;
-
- do {
- __i2c_dw_enable(dev, enable);
- if ((dw_readl(dev, DW_IC_ENABLE_STATUS) & 1) == enable)
- return;
-
- /*
- * Wait 10 times the signaling period of the highest I2C
- * transfer supported by the driver (for 400KHz this is
- * 25us) as described in the DesignWare I2C databook.
- */
- usleep_range(25, 250);
- } while (timeout--);
-
- dev_warn(dev->dev, "timeout in %sabling adapter\n",
- enable ? "en" : "dis");
-}
-
-static unsigned long i2c_dw_clk_rate(struct dw_i2c_dev *dev)
-{
- /*
- * Clock is not necessary if we got LCNT/HCNT values directly from
- * the platform code.
- */
- if (WARN_ON_ONCE(!dev->get_clk_rate_khz))
- return 0;
- return dev->get_clk_rate_khz(dev);
-}
-
-static int i2c_dw_acquire_lock(struct dw_i2c_dev *dev)
-{
- int ret;
-
- if (!dev->acquire_lock)
- return 0;
-
- ret = dev->acquire_lock(dev);
- if (!ret)
- return 0;
-
- dev_err(dev->dev, "couldn't acquire bus ownership\n");
-
- return ret;
-}
-
-static void i2c_dw_release_lock(struct dw_i2c_dev *dev)
-{
- if (dev->release_lock)
- dev->release_lock(dev);
-}
-
-/**
- * i2c_dw_init() - initialize the designware i2c master hardware
- * @dev: device private data
- *
- * This functions configures and enables the I2C master.
- * This function is called during I2C init function, and in case of timeout at
- * run time.
- */
-int i2c_dw_init(struct dw_i2c_dev *dev)
-{
- u32 hcnt, lcnt;
- u32 reg, comp_param1;
- u32 sda_falling_time, scl_falling_time;
- int ret;
-
- ret = i2c_dw_acquire_lock(dev);
- if (ret)
- return ret;
-
- reg = dw_readl(dev, DW_IC_COMP_TYPE);
- if (reg == ___constant_swab32(DW_IC_COMP_TYPE_VALUE)) {
- /* Configure register endianess access */
- dev->flags |= ACCESS_SWAP;
- } else if (reg == (DW_IC_COMP_TYPE_VALUE & 0x0000ffff)) {
- /* Configure register access mode 16bit */
- dev->flags |= ACCESS_16BIT;
- } else if (reg != DW_IC_COMP_TYPE_VALUE) {
- dev_err(dev->dev, "Unknown Synopsys component type: "
- "0x%08x\n", reg);
- i2c_dw_release_lock(dev);
- return -ENODEV;
- }
-
- comp_param1 = dw_readl(dev, DW_IC_COMP_PARAM_1);
-
- /* Disable the adapter */
- __i2c_dw_enable_and_wait(dev, false);
-
- /* set standard and fast speed deviders for high/low periods */
-
- sda_falling_time = dev->sda_falling_time ?: 300; /* ns */
- scl_falling_time = dev->scl_falling_time ?: 300; /* ns */
-
- /* Set SCL timing parameters for standard-mode */
- if (dev->ss_hcnt && dev->ss_lcnt) {
- hcnt = dev->ss_hcnt;
- lcnt = dev->ss_lcnt;
- } else {
- hcnt = i2c_dw_scl_hcnt(i2c_dw_clk_rate(dev),
- 4000, /* tHD;STA = tHIGH = 4.0 us */
- sda_falling_time,
- 0, /* 0: DW default, 1: Ideal */
- 0); /* No offset */
- lcnt = i2c_dw_scl_lcnt(i2c_dw_clk_rate(dev),
- 4700, /* tLOW = 4.7 us */
- scl_falling_time,
- 0); /* No offset */
- }
- dw_writel(dev, hcnt, DW_IC_SS_SCL_HCNT);
- dw_writel(dev, lcnt, DW_IC_SS_SCL_LCNT);
- dev_dbg(dev->dev, "Standard-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
-
- /* Set SCL timing parameters for fast-mode or fast-mode plus */
- if ((dev->clk_freq == 1000000) && dev->fp_hcnt && dev->fp_lcnt) {
- hcnt = dev->fp_hcnt;
- lcnt = dev->fp_lcnt;
- } else if (dev->fs_hcnt && dev->fs_lcnt) {
- hcnt = dev->fs_hcnt;
- lcnt = dev->fs_lcnt;
- } else {
- hcnt = i2c_dw_scl_hcnt(i2c_dw_clk_rate(dev),
- 600, /* tHD;STA = tHIGH = 0.6 us */
- sda_falling_time,
- 0, /* 0: DW default, 1: Ideal */
- 0); /* No offset */
- lcnt = i2c_dw_scl_lcnt(i2c_dw_clk_rate(dev),
- 1300, /* tLOW = 1.3 us */
- scl_falling_time,
- 0); /* No offset */
- }
- dw_writel(dev, hcnt, DW_IC_FS_SCL_HCNT);
- dw_writel(dev, lcnt, DW_IC_FS_SCL_LCNT);
- dev_dbg(dev->dev, "Fast-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
-
- if ((dev->master_cfg & DW_IC_CON_SPEED_MASK) ==
- DW_IC_CON_SPEED_HIGH) {
- if ((comp_param1 & DW_IC_COMP_PARAM_1_SPEED_MODE_MASK)
- != DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH) {
- dev_err(dev->dev, "High Speed not supported!\n");
- dev->master_cfg &= ~DW_IC_CON_SPEED_MASK;
- dev->master_cfg |= DW_IC_CON_SPEED_FAST;
- } else if (dev->hs_hcnt && dev->hs_lcnt) {
- hcnt = dev->hs_hcnt;
- lcnt = dev->hs_lcnt;
- dw_writel(dev, hcnt, DW_IC_HS_SCL_HCNT);
- dw_writel(dev, lcnt, DW_IC_HS_SCL_LCNT);
- dev_dbg(dev->dev, "HighSpeed-mode HCNT:LCNT = %d:%d\n",
- hcnt, lcnt);
- }
- }
-
- /* Configure SDA Hold Time if required */
- reg = dw_readl(dev, DW_IC_COMP_VERSION);
- if (reg >= DW_IC_SDA_HOLD_MIN_VERS) {
- if (!dev->sda_hold_time) {
- /* Keep previous hold time setting if no one set it */
- dev->sda_hold_time = dw_readl(dev, DW_IC_SDA_HOLD);
- }
- /*
- * Workaround for avoiding TX arbitration lost in case I2C
- * slave pulls SDA down "too quickly" after falling egde of
- * SCL by enabling non-zero SDA RX hold. Specification says it
- * extends incoming SDA low to high transition while SCL is
- * high but it apprears to help also above issue.
- */
- if (!(dev->sda_hold_time & DW_IC_SDA_HOLD_RX_MASK))
- dev->sda_hold_time |= 1 << DW_IC_SDA_HOLD_RX_SHIFT;
- dw_writel(dev, dev->sda_hold_time, DW_IC_SDA_HOLD);
- } else {
- dev_warn(dev->dev,
- "Hardware too old to adjust SDA hold time.\n");
- }
-
- /* Configure Tx/Rx FIFO threshold levels */
- dw_writel(dev, dev->tx_fifo_depth / 2, DW_IC_TX_TL);
- dw_writel(dev, 0, DW_IC_RX_TL);
-
- /* configure the i2c master */
- dw_writel(dev, dev->master_cfg , DW_IC_CON);
-
- i2c_dw_release_lock(dev);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(i2c_dw_init);
-
-/*
- * Waiting for bus not busy
- */
-static int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev)
-{
- int timeout = TIMEOUT;
-
- while (dw_readl(dev, DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) {
- if (timeout <= 0) {
- dev_warn(dev->dev, "timeout waiting for bus ready\n");
- return -ETIMEDOUT;
- }
- timeout--;
- usleep_range(1000, 1100);
- }
-
- return 0;
-}
-
-static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
-{
- struct i2c_msg *msgs = dev->msgs;
- u32 ic_con, ic_tar = 0;
-
- /* Disable the adapter */
- __i2c_dw_enable_and_wait(dev, false);
-
- /* if the slave address is ten bit address, enable 10BITADDR */
- ic_con = dw_readl(dev, DW_IC_CON);
- if (msgs[dev->msg_write_idx].flags & I2C_M_TEN) {
- ic_con |= DW_IC_CON_10BITADDR_MASTER;
- /*
- * If I2C_DYNAMIC_TAR_UPDATE is set, the 10-bit addressing
- * mode has to be enabled via bit 12 of IC_TAR register.
- * We set it always as I2C_DYNAMIC_TAR_UPDATE can't be
- * detected from registers.
- */
- ic_tar = DW_IC_TAR_10BITADDR_MASTER;
- } else {
- ic_con &= ~DW_IC_CON_10BITADDR_MASTER;
- }
-
- dw_writel(dev, ic_con, DW_IC_CON);
-
- /*
- * Set the slave (target) address and enable 10-bit addressing mode
- * if applicable.
- */
- dw_writel(dev, msgs[dev->msg_write_idx].addr | ic_tar, DW_IC_TAR);
-
- /* enforce disabled interrupts (due to HW issues) */
- i2c_dw_disable_int(dev);
-
- /* Enable the adapter */
- __i2c_dw_enable(dev, true);
-
- /* Clear and enable interrupts */
- dw_readl(dev, DW_IC_CLR_INTR);
- dw_writel(dev, DW_IC_INTR_DEFAULT_MASK, DW_IC_INTR_MASK);
-}
-
-/*
- * Initiate (and continue) low level master read/write transaction.
- * This function is only called from i2c_dw_isr, and pumping i2c_msg
- * messages into the tx buffer. Even if the size of i2c_msg data is
- * longer than the size of the tx buffer, it handles everything.
- */
-static void
-i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
-{
- struct i2c_msg *msgs = dev->msgs;
- u32 intr_mask;
- int tx_limit, rx_limit;
- u32 addr = msgs[dev->msg_write_idx].addr;
- u32 buf_len = dev->tx_buf_len;
- u8 *buf = dev->tx_buf;
- bool need_restart = false;
-
- intr_mask = DW_IC_INTR_DEFAULT_MASK;
-
- for (; dev->msg_write_idx < dev->msgs_num; dev->msg_write_idx++) {
- u32 flags = msgs[dev->msg_write_idx].flags;
-
- /*
- * if target address has changed, we need to
- * reprogram the target address in the i2c
- * adapter when we are done with this transfer
- */
- if (msgs[dev->msg_write_idx].addr != addr) {
- dev_err(dev->dev,
- "%s: invalid target address\n", __func__);
- dev->msg_err = -EINVAL;
- break;
- }
-
- if (msgs[dev->msg_write_idx].len == 0) {
- dev_err(dev->dev,
- "%s: invalid message length\n", __func__);
- dev->msg_err = -EINVAL;
- break;
- }
-
- if (!(dev->status & STATUS_WRITE_IN_PROGRESS)) {
- /* new i2c_msg */
- buf = msgs[dev->msg_write_idx].buf;
- buf_len = msgs[dev->msg_write_idx].len;
-
- /* If both IC_EMPTYFIFO_HOLD_MASTER_EN and
- * IC_RESTART_EN are set, we must manually
- * set restart bit between messages.
- */
- if ((dev->master_cfg & DW_IC_CON_RESTART_EN) &&
- (dev->msg_write_idx > 0))
- need_restart = true;
- }
-
- tx_limit = dev->tx_fifo_depth - dw_readl(dev, DW_IC_TXFLR);
- rx_limit = dev->rx_fifo_depth - dw_readl(dev, DW_IC_RXFLR);
-
- while (buf_len > 0 && tx_limit > 0 && rx_limit > 0) {
- u32 cmd = 0;
-
- /*
- * If IC_EMPTYFIFO_HOLD_MASTER_EN is set we must
- * manually set the stop bit. However, it cannot be
- * detected from the registers so we set it always
- * when writing/reading the last byte.
- */
-
- /*
- * i2c-core.c always sets the buffer length of
- * I2C_FUNC_SMBUS_BLOCK_DATA to 1. The length will
- * be adjusted when receiving the first byte.
- * Thus we can't stop the transaction here.
- */
- if (dev->msg_write_idx == dev->msgs_num - 1 &&
- buf_len == 1 && !(flags & I2C_M_RECV_LEN))
- cmd |= BIT(9);
-
- if (need_restart) {
- cmd |= BIT(10);
- need_restart = false;
- }
-
- if (msgs[dev->msg_write_idx].flags & I2C_M_RD) {
-
- /* avoid rx buffer overrun */
- if (dev->rx_outstanding >= dev->rx_fifo_depth)
- break;
-
- dw_writel(dev, cmd | 0x100, DW_IC_DATA_CMD);
- rx_limit--;
- dev->rx_outstanding++;
- } else
- dw_writel(dev, cmd | *buf++, DW_IC_DATA_CMD);
- tx_limit--; buf_len--;
- }
-
- dev->tx_buf = buf;
- dev->tx_buf_len = buf_len;
-
- /*
- * Because we don't know the buffer length in the
- * I2C_FUNC_SMBUS_BLOCK_DATA case, we can't stop
- * the transaction here.
- */
- if (buf_len > 0 || flags & I2C_M_RECV_LEN) {
- /* more bytes to be written */
- dev->status |= STATUS_WRITE_IN_PROGRESS;
- break;
- } else
- dev->status &= ~STATUS_WRITE_IN_PROGRESS;
- }
-
- /*
- * If i2c_msg index search is completed, we don't need TX_EMPTY
- * interrupt any more.
- */
- if (dev->msg_write_idx == dev->msgs_num)
- intr_mask &= ~DW_IC_INTR_TX_EMPTY;
-
- if (dev->msg_err)
- intr_mask = 0;
-
- dw_writel(dev, intr_mask, DW_IC_INTR_MASK);
-}
-
-static u8
-i2c_dw_recv_len(struct dw_i2c_dev *dev, u8 len)
-{
- struct i2c_msg *msgs = dev->msgs;
- u32 flags = msgs[dev->msg_read_idx].flags;
-
- /*
- * Adjust the buffer length and mask the flag
- * after receiving the first byte.
- */
- len += (flags & I2C_CLIENT_PEC) ? 2 : 1;
- dev->tx_buf_len = len - min_t(u8, len, dev->rx_outstanding);
- msgs[dev->msg_read_idx].len = len;
- msgs[dev->msg_read_idx].flags &= ~I2C_M_RECV_LEN;
-
- return len;
-}
-
-static void
-i2c_dw_read(struct dw_i2c_dev *dev)
-{
- struct i2c_msg *msgs = dev->msgs;
- int rx_valid;
-
- for (; dev->msg_read_idx < dev->msgs_num; dev->msg_read_idx++) {
- u32 len;
- u8 *buf;
-
- if (!(msgs[dev->msg_read_idx].flags & I2C_M_RD))
- continue;
-
- if (!(dev->status & STATUS_READ_IN_PROGRESS)) {
- len = msgs[dev->msg_read_idx].len;
- buf = msgs[dev->msg_read_idx].buf;
- } else {
- len = dev->rx_buf_len;
- buf = dev->rx_buf;
- }
-
- rx_valid = dw_readl(dev, DW_IC_RXFLR);
-
- for (; len > 0 && rx_valid > 0; len--, rx_valid--) {
- u32 flags = msgs[dev->msg_read_idx].flags;
-
- *buf = dw_readl(dev, DW_IC_DATA_CMD);
- /* Ensure length byte is a valid value */
- if (flags & I2C_M_RECV_LEN &&
- *buf <= I2C_SMBUS_BLOCK_MAX && *buf > 0) {
- len = i2c_dw_recv_len(dev, *buf);
- }
- buf++;
- dev->rx_outstanding--;
- }
-
- if (len > 0) {
- dev->status |= STATUS_READ_IN_PROGRESS;
- dev->rx_buf_len = len;
- dev->rx_buf = buf;
- return;
- } else
- dev->status &= ~STATUS_READ_IN_PROGRESS;
- }
-}
-
-static int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev)
-{
- unsigned long abort_source = dev->abort_source;
- int i;
-
- if (abort_source & DW_IC_TX_ABRT_NOACK) {
- for_each_set_bit(i, &abort_source, ARRAY_SIZE(abort_sources))
- dev_dbg(dev->dev,
- "%s: %s\n", __func__, abort_sources[i]);
- return -EREMOTEIO;
- }
-
- for_each_set_bit(i, &abort_source, ARRAY_SIZE(abort_sources))
- dev_err(dev->dev, "%s: %s\n", __func__, abort_sources[i]);
-
- if (abort_source & DW_IC_TX_ARB_LOST)
- return -EAGAIN;
- else if (abort_source & DW_IC_TX_ABRT_GCALL_READ)
- return -EINVAL; /* wrong msgs[] data */
- else
- return -EIO;
-}
-
-/*
- * Prepare controller for a transaction and call i2c_dw_xfer_msg
- */
-static int
-i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
-{
- struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
- int ret;
-
- dev_dbg(dev->dev, "%s: msgs: %d\n", __func__, num);
-
- pm_runtime_get_sync(dev->dev);
-
- reinit_completion(&dev->cmd_complete);
- dev->msgs = msgs;
- dev->msgs_num = num;
- dev->cmd_err = 0;
- dev->msg_write_idx = 0;
- dev->msg_read_idx = 0;
- dev->msg_err = 0;
- dev->status = STATUS_IDLE;
- dev->abort_source = 0;
- dev->rx_outstanding = 0;
-
- ret = i2c_dw_acquire_lock(dev);
- if (ret)
- goto done_nolock;
-
- ret = i2c_dw_wait_bus_not_busy(dev);
- if (ret < 0)
- goto done;
-
- /* start the transfers */
- i2c_dw_xfer_init(dev);
-
- /* wait for tx to complete */
- if (!wait_for_completion_timeout(&dev->cmd_complete, adap->timeout)) {
- dev_err(dev->dev, "controller timed out\n");
- /* i2c_dw_init implicitly disables the adapter */
- i2c_dw_init(dev);
- ret = -ETIMEDOUT;
- goto done;
- }
-
- /*
- * We must disable the adapter before returning and signaling the end
- * of the current transfer. Otherwise the hardware might continue
- * generating interrupts which in turn causes a race condition with
- * the following transfer. Needs some more investigation if the
- * additional interrupts are a hardware bug or this driver doesn't
- * handle them correctly yet.
- */
- __i2c_dw_enable(dev, false);
-
- if (dev->msg_err) {
- ret = dev->msg_err;
- goto done;
- }
-
- /* no error */
- if (likely(!dev->cmd_err && !dev->status)) {
- ret = num;
- goto done;
- }
-
- /* We have an error */
- if (dev->cmd_err == DW_IC_ERR_TX_ABRT) {
- ret = i2c_dw_handle_tx_abort(dev);
- goto done;
- }
-
- if (dev->status)
- dev_err(dev->dev,
- "transfer terminated early - interrupt latency too high?\n");
-
- ret = -EIO;
-
-done:
- i2c_dw_release_lock(dev);
-
-done_nolock:
- pm_runtime_mark_last_busy(dev->dev);
- pm_runtime_put_autosuspend(dev->dev);
-
- return ret;
-}
-
-static u32 i2c_dw_func(struct i2c_adapter *adap)
-{
- struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
- return dev->functionality;
-}
-
-static const struct i2c_algorithm i2c_dw_algo = {
- .master_xfer = i2c_dw_xfer,
- .functionality = i2c_dw_func,
-};
-
-static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev)
-{
- u32 stat;
-
- /*
- * The IC_INTR_STAT register just indicates "enabled" interrupts.
- * Ths unmasked raw version of interrupt status bits are available
- * in the IC_RAW_INTR_STAT register.
- *
- * That is,
- * stat = dw_readl(IC_INTR_STAT);
- * equals to,
- * stat = dw_readl(IC_RAW_INTR_STAT) & dw_readl(IC_INTR_MASK);
- *
- * The raw version might be useful for debugging purposes.
- */
- stat = dw_readl(dev, DW_IC_INTR_STAT);
-
- /*
- * Do not use the IC_CLR_INTR register to clear interrupts, or
- * you'll miss some interrupts, triggered during the period from
- * dw_readl(IC_INTR_STAT) to dw_readl(IC_CLR_INTR).
- *
- * Instead, use the separately-prepared IC_CLR_* registers.
- */
- if (stat & DW_IC_INTR_RX_UNDER)
- dw_readl(dev, DW_IC_CLR_RX_UNDER);
- if (stat & DW_IC_INTR_RX_OVER)
- dw_readl(dev, DW_IC_CLR_RX_OVER);
- if (stat & DW_IC_INTR_TX_OVER)
- dw_readl(dev, DW_IC_CLR_TX_OVER);
- if (stat & DW_IC_INTR_RD_REQ)
- dw_readl(dev, DW_IC_CLR_RD_REQ);
- if (stat & DW_IC_INTR_TX_ABRT) {
- /*
- * The IC_TX_ABRT_SOURCE register is cleared whenever
- * the IC_CLR_TX_ABRT is read. Preserve it beforehand.
- */
- dev->abort_source = dw_readl(dev, DW_IC_TX_ABRT_SOURCE);
- dw_readl(dev, DW_IC_CLR_TX_ABRT);
- }
- if (stat & DW_IC_INTR_RX_DONE)
- dw_readl(dev, DW_IC_CLR_RX_DONE);
- if (stat & DW_IC_INTR_ACTIVITY)
- dw_readl(dev, DW_IC_CLR_ACTIVITY);
- if (stat & DW_IC_INTR_STOP_DET)
- dw_readl(dev, DW_IC_CLR_STOP_DET);
- if (stat & DW_IC_INTR_START_DET)
- dw_readl(dev, DW_IC_CLR_START_DET);
- if (stat & DW_IC_INTR_GEN_CALL)
- dw_readl(dev, DW_IC_CLR_GEN_CALL);
-
- return stat;
-}
-
-/*
- * Interrupt service routine. This gets called whenever an I2C interrupt
- * occurs.
- */
-static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
-{
- struct dw_i2c_dev *dev = dev_id;
- u32 stat, enabled;
-
- enabled = dw_readl(dev, DW_IC_ENABLE);
- stat = dw_readl(dev, DW_IC_RAW_INTR_STAT);
- dev_dbg(dev->dev, "%s: enabled=%#x stat=%#x\n", __func__, enabled, stat);
- if (!enabled || !(stat & ~DW_IC_INTR_ACTIVITY))
- return IRQ_NONE;
-
- stat = i2c_dw_read_clear_intrbits(dev);
-
- if (stat & DW_IC_INTR_TX_ABRT) {
- dev->cmd_err |= DW_IC_ERR_TX_ABRT;
- dev->status = STATUS_IDLE;
-
- /*
- * Anytime TX_ABRT is set, the contents of the tx/rx
- * buffers are flushed. Make sure to skip them.
- */
- dw_writel(dev, 0, DW_IC_INTR_MASK);
- goto tx_aborted;
- }
-
- if (stat & DW_IC_INTR_RX_FULL)
- i2c_dw_read(dev);
-
- if (stat & DW_IC_INTR_TX_EMPTY)
- i2c_dw_xfer_msg(dev);
-
- /*
- * No need to modify or disable the interrupt mask here.
- * i2c_dw_xfer_msg() will take care of it according to
- * the current transmit status.
- */
-
-tx_aborted:
- if ((stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET)) || dev->msg_err)
- complete(&dev->cmd_complete);
- else if (unlikely(dev->flags & ACCESS_INTR_MASK)) {
- /* workaround to trigger pending interrupt */
- stat = dw_readl(dev, DW_IC_INTR_MASK);
- i2c_dw_disable_int(dev);
- dw_writel(dev, stat, DW_IC_INTR_MASK);
- }
-
- return IRQ_HANDLED;
-}
-
-void i2c_dw_disable(struct dw_i2c_dev *dev)
-{
- /* Disable controller */
- __i2c_dw_enable_and_wait(dev, false);
-
- /* Disable all interupts */
- dw_writel(dev, 0, DW_IC_INTR_MASK);
- dw_readl(dev, DW_IC_CLR_INTR);
-}
-EXPORT_SYMBOL_GPL(i2c_dw_disable);
-
-void i2c_dw_disable_int(struct dw_i2c_dev *dev)
-{
- dw_writel(dev, 0, DW_IC_INTR_MASK);
-}
-EXPORT_SYMBOL_GPL(i2c_dw_disable_int);
-
-u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev)
-{
- return dw_readl(dev, DW_IC_COMP_PARAM_1);
-}
-EXPORT_SYMBOL_GPL(i2c_dw_read_comp_param);
-
-int i2c_dw_probe(struct dw_i2c_dev *dev)
-{
- struct i2c_adapter *adap = &dev->adapter;
- unsigned long irq_flags;
- int r;
-
- init_completion(&dev->cmd_complete);
-
- r = i2c_dw_init(dev);
- if (r)
- return r;
-
- snprintf(adap->name, sizeof(adap->name),
- "Synopsys DesignWare I2C adapter");
- adap->retries = 3;
- adap->algo = &i2c_dw_algo;
- adap->dev.parent = dev->dev;
- i2c_set_adapdata(adap, dev);
-
- if (dev->pm_disabled) {
- dev_pm_syscore_device(dev->dev, true);
- irq_flags = IRQF_NO_SUSPEND;
- } else {
- irq_flags = IRQF_SHARED | IRQF_COND_SUSPEND;
- }
-
- i2c_dw_disable_int(dev);
- r = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr, irq_flags,
- dev_name(dev->dev), dev);
- if (r) {
- dev_err(dev->dev, "failure requesting irq %i: %d\n",
- dev->irq, r);
- return r;
- }
-
- /*
- * Increment PM usage count during adapter registration in order to
- * avoid possible spurious runtime suspend when adapter device is
- * registered to the device core and immediate resume in case bus has
- * registered I2C slaves that do I2C transfers in their probe.
- */
- pm_runtime_get_noresume(dev->dev);
- r = i2c_add_numbered_adapter(adap);
- if (r)
- dev_err(dev->dev, "failure adding adapter: %d\n", r);
- pm_runtime_put_noidle(dev->dev);
-
- return r;
-}
-EXPORT_SYMBOL_GPL(i2c_dw_probe);
-
-MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter core");
-MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index a7cf429..9fee4c0 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -1,5 +1,5 @@
/*
- * Synopsys DesignWare I2C adapter driver (master only).
+ * Synopsys DesignWare I2C adapter driver.
*
* Based on the TI DAVINCI I2C adapter driver.
*
@@ -37,9 +37,152 @@
#define DW_IC_CON_SPEED_FAST 0x4
#define DW_IC_CON_SPEED_HIGH 0x6
#define DW_IC_CON_SPEED_MASK 0x6
+#define DW_IC_CON_10BITADDR_SLAVE 0x8
#define DW_IC_CON_10BITADDR_MASTER 0x10
#define DW_IC_CON_RESTART_EN 0x20
#define DW_IC_CON_SLAVE_DISABLE 0x40
+#define DW_IC_CON_STOP_DET_IFADDRESSED 0x80
+#define DW_IC_CON_TX_EMPTY_CTRL 0x100
+#define DW_IC_CON_RX_FIFO_FULL_HLD_CTRL 0x200
+
+/*
+ * Registers offset
+ */
+#define DW_IC_CON 0x0
+#define DW_IC_TAR 0x4
+#define DW_IC_SAR 0x8
+#define DW_IC_DATA_CMD 0x10
+#define DW_IC_SS_SCL_HCNT 0x14
+#define DW_IC_SS_SCL_LCNT 0x18
+#define DW_IC_FS_SCL_HCNT 0x1c
+#define DW_IC_FS_SCL_LCNT 0x20
+#define DW_IC_HS_SCL_HCNT 0x24
+#define DW_IC_HS_SCL_LCNT 0x28
+#define DW_IC_INTR_STAT 0x2c
+#define DW_IC_INTR_MASK 0x30
+#define DW_IC_RAW_INTR_STAT 0x34
+#define DW_IC_RX_TL 0x38
+#define DW_IC_TX_TL 0x3c
+#define DW_IC_CLR_INTR 0x40
+#define DW_IC_CLR_RX_UNDER 0x44
+#define DW_IC_CLR_RX_OVER 0x48
+#define DW_IC_CLR_TX_OVER 0x4c
+#define DW_IC_CLR_RD_REQ 0x50
+#define DW_IC_CLR_TX_ABRT 0x54
+#define DW_IC_CLR_RX_DONE 0x58
+#define DW_IC_CLR_ACTIVITY 0x5c
+#define DW_IC_CLR_STOP_DET 0x60
+#define DW_IC_CLR_START_DET 0x64
+#define DW_IC_CLR_GEN_CALL 0x68
+#define DW_IC_ENABLE 0x6c
+#define DW_IC_STATUS 0x70
+#define DW_IC_TXFLR 0x74
+#define DW_IC_RXFLR 0x78
+#define DW_IC_SDA_HOLD 0x7c
+#define DW_IC_TX_ABRT_SOURCE 0x80
+#define DW_IC_ENABLE_STATUS 0x9c
+#define DW_IC_CLR_RESTART_DET 0xa8
+#define DW_IC_COMP_PARAM_1 0xf4
+#define DW_IC_COMP_VERSION 0xf8
+#define DW_IC_SDA_HOLD_MIN_VERS 0x3131312A
+#define DW_IC_COMP_TYPE 0xfc
+#define DW_IC_COMP_TYPE_VALUE 0x44570140
+
+#define DW_IC_INTR_RX_UNDER 0x001
+#define DW_IC_INTR_RX_OVER 0x002
+#define DW_IC_INTR_RX_FULL 0x004
+#define DW_IC_INTR_TX_OVER 0x008
+#define DW_IC_INTR_TX_EMPTY 0x010
+#define DW_IC_INTR_RD_REQ 0x020
+#define DW_IC_INTR_TX_ABRT 0x040
+#define DW_IC_INTR_RX_DONE 0x080
+#define DW_IC_INTR_ACTIVITY 0x100
+#define DW_IC_INTR_STOP_DET 0x200
+#define DW_IC_INTR_START_DET 0x400
+#define DW_IC_INTR_GEN_CALL 0x800
+#define DW_IC_INTR_RESTART_DET 0x1000
+
+#define DW_IC_INTR_DEFAULT_MASK (DW_IC_INTR_RX_FULL | \
+ DW_IC_INTR_TX_ABRT | \
+ DW_IC_INTR_STOP_DET)
+#define DW_IC_INTR_MASTER_MASK (DW_IC_INTR_DEFAULT_MASK | \
+ DW_IC_INTR_TX_EMPTY)
+#define DW_IC_INTR_SLAVE_MASK (DW_IC_INTR_DEFAULT_MASK | \
+ DW_IC_INTR_RX_DONE | \
+ DW_IC_INTR_RX_UNDER | \
+ DW_IC_INTR_RD_REQ)
+
+#define DW_IC_STATUS_ACTIVITY 0x1
+#define DW_IC_STATUS_TFE BIT(2)
+#define DW_IC_STATUS_MASTER_ACTIVITY BIT(5)
+#define DW_IC_STATUS_SLAVE_ACTIVITY BIT(6)
+
+#define DW_IC_SDA_HOLD_RX_SHIFT 16
+#define DW_IC_SDA_HOLD_RX_MASK GENMASK(23, DW_IC_SDA_HOLD_RX_SHIFT)
+
+#define DW_IC_ERR_TX_ABRT 0x1
+
+#define DW_IC_TAR_10BITADDR_MASTER BIT(12)
+
+#define DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH (BIT(2) | BIT(3))
+#define DW_IC_COMP_PARAM_1_SPEED_MODE_MASK GENMASK(3, 2)
+
+/*
+ * status codes
+ */
+#define STATUS_IDLE 0x0
+#define STATUS_WRITE_IN_PROGRESS 0x1
+#define STATUS_READ_IN_PROGRESS 0x2
+
+#define TIMEOUT 20 /* ms */
+
+/*
+ * operation modes
+ */
+#define DW_IC_MASTER 0
+#define DW_IC_SLAVE 1
+
+/*
+ * Hardware abort codes from the DW_IC_TX_ABRT_SOURCE register
+ *
+ * Only expected abort codes are listed here
+ * refer to the datasheet for the full list
+ */
+#define ABRT_7B_ADDR_NOACK 0
+#define ABRT_10ADDR1_NOACK 1
+#define ABRT_10ADDR2_NOACK 2
+#define ABRT_TXDATA_NOACK 3
+#define ABRT_GCALL_NOACK 4
+#define ABRT_GCALL_READ 5
+#define ABRT_SBYTE_ACKDET 7
+#define ABRT_SBYTE_NORSTRT 9
+#define ABRT_10B_RD_NORSTRT 10
+#define ABRT_MASTER_DIS 11
+#define ARB_LOST 12
+#define ABRT_SLAVE_FLUSH_TXFIFO 13
+#define ABRT_SLAVE_ARBLOST 14
+#define ABRT_SLAVE_RD_INTX 15
+
+#define DW_IC_TX_ABRT_7B_ADDR_NOACK (1UL << ABRT_7B_ADDR_NOACK)
+#define DW_IC_TX_ABRT_10ADDR1_NOACK (1UL << ABRT_10ADDR1_NOACK)
+#define DW_IC_TX_ABRT_10ADDR2_NOACK (1UL << ABRT_10ADDR2_NOACK)
+#define DW_IC_TX_ABRT_TXDATA_NOACK (1UL << ABRT_TXDATA_NOACK)
+#define DW_IC_TX_ABRT_GCALL_NOACK (1UL << ABRT_GCALL_NOACK)
+#define DW_IC_TX_ABRT_GCALL_READ (1UL << ABRT_GCALL_READ)
+#define DW_IC_TX_ABRT_SBYTE_ACKDET (1UL << ABRT_SBYTE_ACKDET)
+#define DW_IC_TX_ABRT_SBYTE_NORSTRT (1UL << ABRT_SBYTE_NORSTRT)
+#define DW_IC_TX_ABRT_10B_RD_NORSTRT (1UL << ABRT_10B_RD_NORSTRT)
+#define DW_IC_TX_ABRT_MASTER_DIS (1UL << ABRT_MASTER_DIS)
+#define DW_IC_TX_ARB_LOST (1UL << ARB_LOST)
+#define DW_IC_RX_ABRT_SLAVE_RD_INTX (1UL << ABRT_SLAVE_RD_INTX)
+#define DW_IC_RX_ABRT_SLAVE_ARBLOST (1UL << ABRT_SLAVE_ARBLOST)
+#define DW_IC_RX_ABRT_SLAVE_FLUSH_TXFIFO (1UL << ABRT_SLAVE_FLUSH_TXFIFO)
+
+#define DW_IC_TX_ABRT_NOACK (DW_IC_TX_ABRT_7B_ADDR_NOACK | \
+ DW_IC_TX_ABRT_10ADDR1_NOACK | \
+ DW_IC_TX_ABRT_10ADDR2_NOACK | \
+ DW_IC_TX_ABRT_TXDATA_NOACK | \
+ DW_IC_TX_ABRT_GCALL_NOACK)
/**
@@ -48,8 +191,9 @@
* @base: IO registers pointer
* @cmd_complete: tx completion indicator
* @clk: input reference clock
+ * @slave: represent an I2C slave device
* @cmd_err: run time hadware error code
- * @msgs: points to an array of messages currently being transfered
+ * @msgs: points to an array of messages currently being transferred
* @msgs_num: the number of elements in msgs
* @msg_write_idx: the element index of the current tx message in the msgs
* array
@@ -64,6 +208,7 @@
* @abort_source: copy of the TX_ABRT_SOURCE register
* @irq: interrupt number for the i2c master
* @adapter: i2c subsystem adapter node
+ * @slave_cfg: configuration for the slave device
* @tx_fifo_depth: depth of the hardware tx fifo
* @rx_fifo_depth: depth of the hardware rx fifo
* @rx_outstanding: current master-rx elements in tx fifo
@@ -80,6 +225,10 @@
* @acquire_lock: function to acquire a hardware lock on the bus
* @release_lock: function to release a hardware lock on the bus
* @pm_disabled: true if power-management should be disabled for this i2c-bus
+ * @disable: function to disable the controller
+ * @disable_int: function to disable all interrupts
+ * @init: function to initialize the I2C hardware
+ * @mode: operation mode - DW_IC_MASTER or DW_IC_SLAVE
*
* HCNT and LCNT parameters can be used if the platform knows more accurate
* values than the one computed based only on the input clock frequency.
@@ -91,6 +240,7 @@
struct completion cmd_complete;
struct clk *clk;
struct reset_control *rst;
+ struct i2c_client *slave;
u32 (*get_clk_rate_khz) (struct dw_i2c_dev *dev);
struct dw_pci_controller *controller;
int cmd_err;
@@ -110,6 +260,7 @@
struct i2c_adapter adapter;
u32 functionality;
u32 master_cfg;
+ u32 slave_cfg;
unsigned int tx_fifo_depth;
unsigned int rx_fifo_depth;
int rx_outstanding;
@@ -129,6 +280,10 @@
int (*acquire_lock)(struct dw_i2c_dev *dev);
void (*release_lock)(struct dw_i2c_dev *dev);
bool pm_disabled;
+ void (*disable)(struct dw_i2c_dev *dev);
+ void (*disable_int)(struct dw_i2c_dev *dev);
+ int (*init)(struct dw_i2c_dev *dev);
+ int mode;
};
#define ACCESS_SWAP 0x00000001
@@ -137,11 +292,28 @@
#define MODEL_CHERRYTRAIL 0x00000100
-extern int i2c_dw_init(struct dw_i2c_dev *dev);
-extern void i2c_dw_disable(struct dw_i2c_dev *dev);
-extern void i2c_dw_disable_int(struct dw_i2c_dev *dev);
+u32 dw_readl(struct dw_i2c_dev *dev, int offset);
+void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset);
+u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset);
+u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset);
+void __i2c_dw_enable(struct dw_i2c_dev *dev, bool enable);
+void __i2c_dw_enable_and_wait(struct dw_i2c_dev *dev, bool enable);
+unsigned long i2c_dw_clk_rate(struct dw_i2c_dev *dev);
+int i2c_dw_acquire_lock(struct dw_i2c_dev *dev);
+void i2c_dw_release_lock(struct dw_i2c_dev *dev);
+int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev);
+int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev);
+u32 i2c_dw_func(struct i2c_adapter *adap);
+void i2c_dw_disable(struct dw_i2c_dev *dev);
+void i2c_dw_disable_int(struct dw_i2c_dev *dev);
+
extern u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev);
extern int i2c_dw_probe(struct dw_i2c_dev *dev);
+#if IS_ENABLED(CONFIG_I2C_DESIGNWARE_SLAVE)
+extern int i2c_dw_probe_slave(struct dw_i2c_dev *dev);
+#else
+static inline int i2c_dw_probe_slave(struct dw_i2c_dev *dev) { return -EINVAL; }
+#endif
#if IS_ENABLED(CONFIG_I2C_DESIGNWARE_BAYTRAIL)
extern int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev);
diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
new file mode 100644
index 0000000..418c233
--- /dev/null
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -0,0 +1,672 @@
+/*
+ * Synopsys DesignWare I2C adapter driver (master only).
+ *
+ * Based on the TI DAVINCI I2C adapter driver.
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2007 MontaVista Software Inc.
+ * Copyright (C) 2009 Provigent Ltd.
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ * ----------------------------------------------------------------------------
+ *
+ */
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/export.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+
+#include "i2c-designware-core.h"
+
+static void i2c_dw_configure_fifo_master(struct dw_i2c_dev *dev)
+{
+ /* Configure Tx/Rx FIFO threshold levels */
+ dw_writel(dev, dev->tx_fifo_depth / 2, DW_IC_TX_TL);
+ dw_writel(dev, 0, DW_IC_RX_TL);
+
+ /* Configure the I2C master */
+ dw_writel(dev, dev->master_cfg, DW_IC_CON);
+}
+
+/**
+ * i2c_dw_init() - Initialize the designware I2C master hardware
+ * @dev: device private data
+ *
+ * This functions configures and enables the I2C master.
+ * This function is called during I2C init function, and in case of timeout at
+ * run time.
+ */
+static int i2c_dw_init_master(struct dw_i2c_dev *dev)
+{
+ u32 hcnt, lcnt;
+ u32 reg, comp_param1;
+ u32 sda_falling_time, scl_falling_time;
+ int ret;
+
+ ret = i2c_dw_acquire_lock(dev);
+ if (ret)
+ return ret;
+
+ reg = dw_readl(dev, DW_IC_COMP_TYPE);
+ if (reg == ___constant_swab32(DW_IC_COMP_TYPE_VALUE)) {
+ /* Configure register endianess access */
+ dev->flags |= ACCESS_SWAP;
+ } else if (reg == (DW_IC_COMP_TYPE_VALUE & 0x0000ffff)) {
+ /* Configure register access mode 16bit */
+ dev->flags |= ACCESS_16BIT;
+ } else if (reg != DW_IC_COMP_TYPE_VALUE) {
+ dev_err(dev->dev,
+ "Unknown Synopsys component type: 0x%08x\n", reg);
+ i2c_dw_release_lock(dev);
+ return -ENODEV;
+ }
+
+ comp_param1 = dw_readl(dev, DW_IC_COMP_PARAM_1);
+
+ /* Disable the adapter */
+ __i2c_dw_enable_and_wait(dev, false);
+
+ /* Set standard and fast speed deviders for high/low periods */
+
+ sda_falling_time = dev->sda_falling_time ?: 300; /* ns */
+ scl_falling_time = dev->scl_falling_time ?: 300; /* ns */
+
+ /* Set SCL timing parameters for standard-mode */
+ if (dev->ss_hcnt && dev->ss_lcnt) {
+ hcnt = dev->ss_hcnt;
+ lcnt = dev->ss_lcnt;
+ } else {
+ hcnt = i2c_dw_scl_hcnt(i2c_dw_clk_rate(dev),
+ 4000, /* tHD;STA = tHIGH = 4.0 us */
+ sda_falling_time,
+ 0, /* 0: DW default, 1: Ideal */
+ 0); /* No offset */
+ lcnt = i2c_dw_scl_lcnt(i2c_dw_clk_rate(dev),
+ 4700, /* tLOW = 4.7 us */
+ scl_falling_time,
+ 0); /* No offset */
+ }
+ dw_writel(dev, hcnt, DW_IC_SS_SCL_HCNT);
+ dw_writel(dev, lcnt, DW_IC_SS_SCL_LCNT);
+ dev_dbg(dev->dev, "Standard-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
+
+ /* Set SCL timing parameters for fast-mode or fast-mode plus */
+ if ((dev->clk_freq == 1000000) && dev->fp_hcnt && dev->fp_lcnt) {
+ hcnt = dev->fp_hcnt;
+ lcnt = dev->fp_lcnt;
+ } else if (dev->fs_hcnt && dev->fs_lcnt) {
+ hcnt = dev->fs_hcnt;
+ lcnt = dev->fs_lcnt;
+ } else {
+ hcnt = i2c_dw_scl_hcnt(i2c_dw_clk_rate(dev),
+ 600, /* tHD;STA = tHIGH = 0.6 us */
+ sda_falling_time,
+ 0, /* 0: DW default, 1: Ideal */
+ 0); /* No offset */
+ lcnt = i2c_dw_scl_lcnt(i2c_dw_clk_rate(dev),
+ 1300, /* tLOW = 1.3 us */
+ scl_falling_time,
+ 0); /* No offset */
+ }
+ dw_writel(dev, hcnt, DW_IC_FS_SCL_HCNT);
+ dw_writel(dev, lcnt, DW_IC_FS_SCL_LCNT);
+ dev_dbg(dev->dev, "Fast-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
+
+ if ((dev->master_cfg & DW_IC_CON_SPEED_MASK) ==
+ DW_IC_CON_SPEED_HIGH) {
+ if ((comp_param1 & DW_IC_COMP_PARAM_1_SPEED_MODE_MASK)
+ != DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH) {
+ dev_err(dev->dev, "High Speed not supported!\n");
+ dev->master_cfg &= ~DW_IC_CON_SPEED_MASK;
+ dev->master_cfg |= DW_IC_CON_SPEED_FAST;
+ } else if (dev->hs_hcnt && dev->hs_lcnt) {
+ hcnt = dev->hs_hcnt;
+ lcnt = dev->hs_lcnt;
+ dw_writel(dev, hcnt, DW_IC_HS_SCL_HCNT);
+ dw_writel(dev, lcnt, DW_IC_HS_SCL_LCNT);
+ dev_dbg(dev->dev, "HighSpeed-mode HCNT:LCNT = %d:%d\n",
+ hcnt, lcnt);
+ }
+ }
+
+ /* Configure SDA Hold Time if required */
+ reg = dw_readl(dev, DW_IC_COMP_VERSION);
+ if (reg >= DW_IC_SDA_HOLD_MIN_VERS) {
+ if (!dev->sda_hold_time) {
+ /* Keep previous hold time setting if no one set it */
+ dev->sda_hold_time = dw_readl(dev, DW_IC_SDA_HOLD);
+ }
+ /*
+ * Workaround for avoiding TX arbitration lost in case I2C
+ * slave pulls SDA down "too quickly" after falling egde of
+ * SCL by enabling non-zero SDA RX hold. Specification says it
+ * extends incoming SDA low to high transition while SCL is
+ * high but it apprears to help also above issue.
+ */
+ if (!(dev->sda_hold_time & DW_IC_SDA_HOLD_RX_MASK))
+ dev->sda_hold_time |= 1 << DW_IC_SDA_HOLD_RX_SHIFT;
+ dw_writel(dev, dev->sda_hold_time, DW_IC_SDA_HOLD);
+ } else {
+ dev_warn(dev->dev,
+ "Hardware too old to adjust SDA hold time.\n");
+ }
+
+ i2c_dw_configure_fifo_master(dev);
+ i2c_dw_release_lock(dev);
+
+ return 0;
+}
+
+static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
+{
+ struct i2c_msg *msgs = dev->msgs;
+ u32 ic_con, ic_tar = 0;
+
+ /* Disable the adapter */
+ __i2c_dw_enable_and_wait(dev, false);
+
+ /* If the slave address is ten bit address, enable 10BITADDR */
+ ic_con = dw_readl(dev, DW_IC_CON);
+ if (msgs[dev->msg_write_idx].flags & I2C_M_TEN) {
+ ic_con |= DW_IC_CON_10BITADDR_MASTER;
+ /*
+ * If I2C_DYNAMIC_TAR_UPDATE is set, the 10-bit addressing
+ * mode has to be enabled via bit 12 of IC_TAR register.
+ * We set it always as I2C_DYNAMIC_TAR_UPDATE can't be
+ * detected from registers.
+ */
+ ic_tar = DW_IC_TAR_10BITADDR_MASTER;
+ } else {
+ ic_con &= ~DW_IC_CON_10BITADDR_MASTER;
+ }
+
+ dw_writel(dev, ic_con, DW_IC_CON);
+
+ /*
+ * Set the slave (target) address and enable 10-bit addressing mode
+ * if applicable.
+ */
+ dw_writel(dev, msgs[dev->msg_write_idx].addr | ic_tar, DW_IC_TAR);
+
+ /* Enforce disabled interrupts (due to HW issues) */
+ i2c_dw_disable_int(dev);
+
+ /* Enable the adapter */
+ __i2c_dw_enable(dev, true);
+
+ /* Clear and enable interrupts */
+ dw_readl(dev, DW_IC_CLR_INTR);
+ dw_writel(dev, DW_IC_INTR_MASTER_MASK, DW_IC_INTR_MASK);
+}
+
+/*
+ * Initiate (and continue) low level master read/write transaction.
+ * This function is only called from i2c_dw_isr, and pumping i2c_msg
+ * messages into the tx buffer. Even if the size of i2c_msg data is
+ * longer than the size of the tx buffer, it handles everything.
+ */
+static void
+i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
+{
+ struct i2c_msg *msgs = dev->msgs;
+ u32 intr_mask;
+ int tx_limit, rx_limit;
+ u32 addr = msgs[dev->msg_write_idx].addr;
+ u32 buf_len = dev->tx_buf_len;
+ u8 *buf = dev->tx_buf;
+ bool need_restart = false;
+
+ intr_mask = DW_IC_INTR_MASTER_MASK;
+
+ for (; dev->msg_write_idx < dev->msgs_num; dev->msg_write_idx++) {
+ u32 flags = msgs[dev->msg_write_idx].flags;
+
+ /*
+ * If target address has changed, we need to
+ * reprogram the target address in the I2C
+ * adapter when we are done with this transfer.
+ */
+ if (msgs[dev->msg_write_idx].addr != addr) {
+ dev_err(dev->dev,
+ "%s: invalid target address\n", __func__);
+ dev->msg_err = -EINVAL;
+ break;
+ }
+
+ if (msgs[dev->msg_write_idx].len == 0) {
+ dev_err(dev->dev,
+ "%s: invalid message length\n", __func__);
+ dev->msg_err = -EINVAL;
+ break;
+ }
+
+ if (!(dev->status & STATUS_WRITE_IN_PROGRESS)) {
+ /* new i2c_msg */
+ buf = msgs[dev->msg_write_idx].buf;
+ buf_len = msgs[dev->msg_write_idx].len;
+
+ /* If both IC_EMPTYFIFO_HOLD_MASTER_EN and
+ * IC_RESTART_EN are set, we must manually
+ * set restart bit between messages.
+ */
+ if ((dev->master_cfg & DW_IC_CON_RESTART_EN) &&
+ (dev->msg_write_idx > 0))
+ need_restart = true;
+ }
+
+ tx_limit = dev->tx_fifo_depth - dw_readl(dev, DW_IC_TXFLR);
+ rx_limit = dev->rx_fifo_depth - dw_readl(dev, DW_IC_RXFLR);
+
+ while (buf_len > 0 && tx_limit > 0 && rx_limit > 0) {
+ u32 cmd = 0;
+
+ /*
+ * If IC_EMPTYFIFO_HOLD_MASTER_EN is set we must
+ * manually set the stop bit. However, it cannot be
+ * detected from the registers so we set it always
+ * when writing/reading the last byte.
+ */
+
+ /*
+ * i2c-core always sets the buffer length of
+ * I2C_FUNC_SMBUS_BLOCK_DATA to 1. The length will
+ * be adjusted when receiving the first byte.
+ * Thus we can't stop the transaction here.
+ */
+ if (dev->msg_write_idx == dev->msgs_num - 1 &&
+ buf_len == 1 && !(flags & I2C_M_RECV_LEN))
+ cmd |= BIT(9);
+
+ if (need_restart) {
+ cmd |= BIT(10);
+ need_restart = false;
+ }
+
+ if (msgs[dev->msg_write_idx].flags & I2C_M_RD) {
+
+ /* Avoid rx buffer overrun */
+ if (dev->rx_outstanding >= dev->rx_fifo_depth)
+ break;
+
+ dw_writel(dev, cmd | 0x100, DW_IC_DATA_CMD);
+ rx_limit--;
+ dev->rx_outstanding++;
+ } else
+ dw_writel(dev, cmd | *buf++, DW_IC_DATA_CMD);
+ tx_limit--; buf_len--;
+ }
+
+ dev->tx_buf = buf;
+ dev->tx_buf_len = buf_len;
+
+ /*
+ * Because we don't know the buffer length in the
+ * I2C_FUNC_SMBUS_BLOCK_DATA case, we can't stop
+ * the transaction here.
+ */
+ if (buf_len > 0 || flags & I2C_M_RECV_LEN) {
+ /* more bytes to be written */
+ dev->status |= STATUS_WRITE_IN_PROGRESS;
+ break;
+ } else
+ dev->status &= ~STATUS_WRITE_IN_PROGRESS;
+ }
+
+ /*
+ * If i2c_msg index search is completed, we don't need TX_EMPTY
+ * interrupt any more.
+ */
+ if (dev->msg_write_idx == dev->msgs_num)
+ intr_mask &= ~DW_IC_INTR_TX_EMPTY;
+
+ if (dev->msg_err)
+ intr_mask = 0;
+
+ dw_writel(dev, intr_mask, DW_IC_INTR_MASK);
+}
+
+static u8
+i2c_dw_recv_len(struct dw_i2c_dev *dev, u8 len)
+{
+ struct i2c_msg *msgs = dev->msgs;
+ u32 flags = msgs[dev->msg_read_idx].flags;
+
+ /*
+ * Adjust the buffer length and mask the flag
+ * after receiving the first byte.
+ */
+ len += (flags & I2C_CLIENT_PEC) ? 2 : 1;
+ dev->tx_buf_len = len - min_t(u8, len, dev->rx_outstanding);
+ msgs[dev->msg_read_idx].len = len;
+ msgs[dev->msg_read_idx].flags &= ~I2C_M_RECV_LEN;
+
+ return len;
+}
+
+static void
+i2c_dw_read(struct dw_i2c_dev *dev)
+{
+ struct i2c_msg *msgs = dev->msgs;
+ int rx_valid;
+
+ for (; dev->msg_read_idx < dev->msgs_num; dev->msg_read_idx++) {
+ u32 len;
+ u8 *buf;
+
+ if (!(msgs[dev->msg_read_idx].flags & I2C_M_RD))
+ continue;
+
+ if (!(dev->status & STATUS_READ_IN_PROGRESS)) {
+ len = msgs[dev->msg_read_idx].len;
+ buf = msgs[dev->msg_read_idx].buf;
+ } else {
+ len = dev->rx_buf_len;
+ buf = dev->rx_buf;
+ }
+
+ rx_valid = dw_readl(dev, DW_IC_RXFLR);
+
+ for (; len > 0 && rx_valid > 0; len--, rx_valid--) {
+ u32 flags = msgs[dev->msg_read_idx].flags;
+
+ *buf = dw_readl(dev, DW_IC_DATA_CMD);
+ /* Ensure length byte is a valid value */
+ if (flags & I2C_M_RECV_LEN &&
+ *buf <= I2C_SMBUS_BLOCK_MAX && *buf > 0) {
+ len = i2c_dw_recv_len(dev, *buf);
+ }
+ buf++;
+ dev->rx_outstanding--;
+ }
+
+ if (len > 0) {
+ dev->status |= STATUS_READ_IN_PROGRESS;
+ dev->rx_buf_len = len;
+ dev->rx_buf = buf;
+ return;
+ } else
+ dev->status &= ~STATUS_READ_IN_PROGRESS;
+ }
+}
+
+/*
+ * Prepare controller for a transaction and call i2c_dw_xfer_msg.
+ */
+static int
+i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
+{
+ struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
+ int ret;
+
+ dev_dbg(dev->dev, "%s: msgs: %d\n", __func__, num);
+
+ pm_runtime_get_sync(dev->dev);
+
+ reinit_completion(&dev->cmd_complete);
+ dev->msgs = msgs;
+ dev->msgs_num = num;
+ dev->cmd_err = 0;
+ dev->msg_write_idx = 0;
+ dev->msg_read_idx = 0;
+ dev->msg_err = 0;
+ dev->status = STATUS_IDLE;
+ dev->abort_source = 0;
+ dev->rx_outstanding = 0;
+
+ ret = i2c_dw_acquire_lock(dev);
+ if (ret)
+ goto done_nolock;
+
+ ret = i2c_dw_wait_bus_not_busy(dev);
+ if (ret < 0)
+ goto done;
+
+ /* Start the transfers */
+ i2c_dw_xfer_init(dev);
+
+ /* Wait for tx to complete */
+ if (!wait_for_completion_timeout(&dev->cmd_complete, adap->timeout)) {
+ dev_err(dev->dev, "controller timed out\n");
+ /* i2c_dw_init implicitly disables the adapter */
+ i2c_dw_init_master(dev);
+ ret = -ETIMEDOUT;
+ goto done;
+ }
+
+ /*
+ * We must disable the adapter before returning and signaling the end
+ * of the current transfer. Otherwise the hardware might continue
+ * generating interrupts which in turn causes a race condition with
+ * the following transfer. Needs some more investigation if the
+ * additional interrupts are a hardware bug or this driver doesn't
+ * handle them correctly yet.
+ */
+ __i2c_dw_enable(dev, false);
+
+ if (dev->msg_err) {
+ ret = dev->msg_err;
+ goto done;
+ }
+
+ /* No error */
+ if (likely(!dev->cmd_err && !dev->status)) {
+ ret = num;
+ goto done;
+ }
+
+ /* We have an error */
+ if (dev->cmd_err == DW_IC_ERR_TX_ABRT) {
+ ret = i2c_dw_handle_tx_abort(dev);
+ goto done;
+ }
+
+ if (dev->status)
+ dev_err(dev->dev,
+ "transfer terminated early - interrupt latency too high?\n");
+
+ ret = -EIO;
+
+done:
+ i2c_dw_release_lock(dev);
+
+done_nolock:
+ pm_runtime_mark_last_busy(dev->dev);
+ pm_runtime_put_autosuspend(dev->dev);
+
+ return ret;
+}
+
+static const struct i2c_algorithm i2c_dw_algo = {
+ .master_xfer = i2c_dw_xfer,
+ .functionality = i2c_dw_func,
+};
+
+static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev)
+{
+ u32 stat;
+
+ /*
+ * The IC_INTR_STAT register just indicates "enabled" interrupts.
+ * Ths unmasked raw version of interrupt status bits are available
+ * in the IC_RAW_INTR_STAT register.
+ *
+ * That is,
+ * stat = dw_readl(IC_INTR_STAT);
+ * equals to,
+ * stat = dw_readl(IC_RAW_INTR_STAT) & dw_readl(IC_INTR_MASK);
+ *
+ * The raw version might be useful for debugging purposes.
+ */
+ stat = dw_readl(dev, DW_IC_INTR_STAT);
+
+ /*
+ * Do not use the IC_CLR_INTR register to clear interrupts, or
+ * you'll miss some interrupts, triggered during the period from
+ * dw_readl(IC_INTR_STAT) to dw_readl(IC_CLR_INTR).
+ *
+ * Instead, use the separately-prepared IC_CLR_* registers.
+ */
+ if (stat & DW_IC_INTR_RX_UNDER)
+ dw_readl(dev, DW_IC_CLR_RX_UNDER);
+ if (stat & DW_IC_INTR_RX_OVER)
+ dw_readl(dev, DW_IC_CLR_RX_OVER);
+ if (stat & DW_IC_INTR_TX_OVER)
+ dw_readl(dev, DW_IC_CLR_TX_OVER);
+ if (stat & DW_IC_INTR_RD_REQ)
+ dw_readl(dev, DW_IC_CLR_RD_REQ);
+ if (stat & DW_IC_INTR_TX_ABRT) {
+ /*
+ * The IC_TX_ABRT_SOURCE register is cleared whenever
+ * the IC_CLR_TX_ABRT is read. Preserve it beforehand.
+ */
+ dev->abort_source = dw_readl(dev, DW_IC_TX_ABRT_SOURCE);
+ dw_readl(dev, DW_IC_CLR_TX_ABRT);
+ }
+ if (stat & DW_IC_INTR_RX_DONE)
+ dw_readl(dev, DW_IC_CLR_RX_DONE);
+ if (stat & DW_IC_INTR_ACTIVITY)
+ dw_readl(dev, DW_IC_CLR_ACTIVITY);
+ if (stat & DW_IC_INTR_STOP_DET)
+ dw_readl(dev, DW_IC_CLR_STOP_DET);
+ if (stat & DW_IC_INTR_START_DET)
+ dw_readl(dev, DW_IC_CLR_START_DET);
+ if (stat & DW_IC_INTR_GEN_CALL)
+ dw_readl(dev, DW_IC_CLR_GEN_CALL);
+
+ return stat;
+}
+
+/*
+ * Interrupt service routine. This gets called whenever an I2C master interrupt
+ * occurs.
+ */
+static int i2c_dw_irq_handler_master(struct dw_i2c_dev *dev)
+{
+ u32 stat;
+
+ stat = i2c_dw_read_clear_intrbits(dev);
+ if (stat & DW_IC_INTR_TX_ABRT) {
+ dev->cmd_err |= DW_IC_ERR_TX_ABRT;
+ dev->status = STATUS_IDLE;
+
+ /*
+ * Anytime TX_ABRT is set, the contents of the tx/rx
+ * buffers are flushed. Make sure to skip them.
+ */
+ dw_writel(dev, 0, DW_IC_INTR_MASK);
+ goto tx_aborted;
+ }
+
+ if (stat & DW_IC_INTR_RX_FULL)
+ i2c_dw_read(dev);
+
+ if (stat & DW_IC_INTR_TX_EMPTY)
+ i2c_dw_xfer_msg(dev);
+
+ /*
+ * No need to modify or disable the interrupt mask here.
+ * i2c_dw_xfer_msg() will take care of it according to
+ * the current transmit status.
+ */
+
+tx_aborted:
+ if ((stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET)) || dev->msg_err)
+ complete(&dev->cmd_complete);
+ else if (unlikely(dev->flags & ACCESS_INTR_MASK)) {
+ /* Workaround to trigger pending interrupt */
+ stat = dw_readl(dev, DW_IC_INTR_MASK);
+ i2c_dw_disable_int(dev);
+ dw_writel(dev, stat, DW_IC_INTR_MASK);
+ }
+
+ return 0;
+}
+
+static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
+{
+ struct dw_i2c_dev *dev = dev_id;
+ u32 stat, enabled;
+
+ enabled = dw_readl(dev, DW_IC_ENABLE);
+ stat = dw_readl(dev, DW_IC_RAW_INTR_STAT);
+ dev_dbg(dev->dev, "enabled=%#x stat=%#x\n", enabled, stat);
+ if (!enabled || !(stat & ~DW_IC_INTR_ACTIVITY))
+ return IRQ_NONE;
+
+ i2c_dw_irq_handler_master(dev);
+
+ return IRQ_HANDLED;
+}
+
+int i2c_dw_probe(struct dw_i2c_dev *dev)
+{
+ struct i2c_adapter *adap = &dev->adapter;
+ unsigned long irq_flags;
+ int ret;
+
+ init_completion(&dev->cmd_complete);
+
+ dev->init = i2c_dw_init_master;
+ dev->disable = i2c_dw_disable;
+ dev->disable_int = i2c_dw_disable_int;
+
+ ret = dev->init(dev);
+ if (ret)
+ return ret;
+
+ snprintf(adap->name, sizeof(adap->name),
+ "Synopsys DesignWare I2C adapter");
+ adap->retries = 3;
+ adap->algo = &i2c_dw_algo;
+ adap->dev.parent = dev->dev;
+ i2c_set_adapdata(adap, dev);
+
+ if (dev->pm_disabled) {
+ dev_pm_syscore_device(dev->dev, true);
+ irq_flags = IRQF_NO_SUSPEND;
+ } else {
+ irq_flags = IRQF_SHARED | IRQF_COND_SUSPEND;
+ }
+
+ i2c_dw_disable_int(dev);
+ ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr, irq_flags,
+ dev_name(dev->dev), dev);
+ if (ret) {
+ dev_err(dev->dev, "failure requesting irq %i: %d\n",
+ dev->irq, ret);
+ return ret;
+ }
+
+ /*
+ * Increment PM usage count during adapter registration in order to
+ * avoid possible spurious runtime suspend when adapter device is
+ * registered to the device core and immediate resume in case bus has
+ * registered I2C slaves that do I2C transfers in their probe.
+ */
+ pm_runtime_get_noresume(dev->dev);
+ ret = i2c_add_numbered_adapter(adap);
+ if (ret)
+ dev_err(dev->dev, "failure adding adapter: %d\n", ret);
+ pm_runtime_put_noidle(dev->dev);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(i2c_dw_probe);
+
+MODULE_DESCRIPTION("Synopsys DesignWare I2C bus master adapter");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index ed485b6..86e1bd0 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -187,16 +187,19 @@
static int i2c_dw_pci_suspend(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
+ struct dw_i2c_dev *i_dev = pci_get_drvdata(pdev);
- i2c_dw_disable(pci_get_drvdata(pdev));
+ i_dev->disable(i_dev);
+
return 0;
}
static int i2c_dw_pci_resume(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
+ struct dw_i2c_dev *i_dev = pci_get_drvdata(pdev);
- return i2c_dw_init(pci_get_drvdata(pdev));
+ return i_dev->init(i_dev);
}
#endif
@@ -296,7 +299,7 @@
{
struct dw_i2c_dev *dev = pci_get_drvdata(pdev);
- i2c_dw_disable(dev);
+ dev->disable(dev);
pm_runtime_forbid(&pdev->dev);
pm_runtime_get_noresume(&pdev->dev);
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index d1263b8..2ea6d0d 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -1,5 +1,5 @@
/*
- * Synopsys DesignWare I2C adapter driver (master only).
+ * Synopsys DesignWare I2C adapter driver.
*
* Based on the TI DAVINCI I2C adapter driver.
*
@@ -21,27 +21,28 @@
* ----------------------------------------------------------------------------
*
*/
-#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/clk-provider.h>
+#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/dmi.h>
-#include <linux/i2c.h>
-#include <linux/clk.h>
-#include <linux/clk-provider.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/of.h>
+#include <linux/platform_data/i2c-designware.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include <linux/property.h>
-#include <linux/io.h>
#include <linux/reset.h>
+#include <linux/sched.h>
#include <linux/slab.h>
-#include <linux/acpi.h>
-#include <linux/platform_data/i2c-designware.h>
+
#include "i2c-designware-core.h"
static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)
@@ -171,6 +172,49 @@
}
#endif
+static void i2c_dw_configure_master(struct dw_i2c_dev *dev)
+{
+ dev->functionality = I2C_FUNC_10BIT_ADDR | DW_IC_DEFAULT_FUNCTIONALITY;
+
+ dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
+ DW_IC_CON_RESTART_EN;
+
+ dev->mode = DW_IC_MASTER;
+
+ switch (dev->clk_freq) {
+ case 100000:
+ dev->master_cfg |= DW_IC_CON_SPEED_STD;
+ break;
+ case 3400000:
+ dev->master_cfg |= DW_IC_CON_SPEED_HIGH;
+ break;
+ default:
+ dev->master_cfg |= DW_IC_CON_SPEED_FAST;
+ }
+}
+
+static void i2c_dw_configure_slave(struct dw_i2c_dev *dev)
+{
+ dev->functionality = I2C_FUNC_SLAVE | DW_IC_DEFAULT_FUNCTIONALITY;
+
+ dev->slave_cfg = DW_IC_CON_RX_FIFO_FULL_HLD_CTRL |
+ DW_IC_CON_RESTART_EN | DW_IC_CON_STOP_DET_IFADDRESSED |
+ DW_IC_CON_SPEED_FAST;
+
+ dev->mode = DW_IC_SLAVE;
+
+ switch (dev->clk_freq) {
+ case 100000:
+ dev->slave_cfg |= DW_IC_CON_SPEED_STD;
+ break;
+ case 3400000:
+ dev->slave_cfg |= DW_IC_CON_SPEED_HIGH;
+ break;
+ default:
+ dev->slave_cfg |= DW_IC_CON_SPEED_FAST;
+ }
+}
+
static int i2c_dw_plat_prepare_clk(struct dw_i2c_dev *i_dev, bool prepare)
{
if (IS_ERR(i_dev->clk))
@@ -209,11 +253,11 @@
static int dw_i2c_plat_probe(struct platform_device *pdev)
{
struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev);
- struct dw_i2c_dev *dev;
struct i2c_adapter *adap;
- struct resource *mem;
- int irq, r;
+ struct dw_i2c_dev *dev;
u32 acpi_speed, ht = 0;
+ struct resource *mem;
+ int irq, ret;
irq = platform_get_irq(pdev, 0);
if (irq < 0)
@@ -276,29 +320,18 @@
&& dev->clk_freq != 1000000 && dev->clk_freq != 3400000) {
dev_err(&pdev->dev,
"Only 100kHz, 400kHz, 1MHz and 3.4MHz supported");
- r = -EINVAL;
+ ret = -EINVAL;
goto exit_reset;
}
- r = i2c_dw_probe_lock_support(dev);
- if (r)
+ ret = i2c_dw_probe_lock_support(dev);
+ if (ret)
goto exit_reset;
- dev->functionality = I2C_FUNC_10BIT_ADDR | DW_IC_DEFAULT_FUNCTIONALITY;
-
- dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
- DW_IC_CON_RESTART_EN;
-
- switch (dev->clk_freq) {
- case 100000:
- dev->master_cfg |= DW_IC_CON_SPEED_STD;
- break;
- case 3400000:
- dev->master_cfg |= DW_IC_CON_SPEED_HIGH;
- break;
- default:
- dev->master_cfg |= DW_IC_CON_SPEED_FAST;
- }
+ if (i2c_detect_slave_mode(&pdev->dev))
+ i2c_dw_configure_slave(dev);
+ else
+ i2c_dw_configure_master(dev);
dev->clk = devm_clk_get(&pdev->dev, NULL);
if (!i2c_dw_plat_prepare_clk(dev, true)) {
@@ -327,11 +360,15 @@
pm_runtime_enable(&pdev->dev);
}
- r = i2c_dw_probe(dev);
- if (r)
+ if (dev->mode == DW_IC_SLAVE)
+ ret = i2c_dw_probe_slave(dev);
+ else
+ ret = i2c_dw_probe(dev);
+
+ if (ret)
goto exit_probe;
- return r;
+ return ret;
exit_probe:
if (!dev->pm_disabled)
@@ -339,7 +376,7 @@
exit_reset:
if (!IS_ERR_OR_NULL(dev->rst))
reset_control_assert(dev->rst);
- return r;
+ return ret;
}
static int dw_i2c_plat_remove(struct platform_device *pdev)
@@ -350,7 +387,7 @@
i2c_del_adapter(&dev->adapter);
- i2c_dw_disable(dev);
+ dev->disable(dev);
pm_runtime_dont_use_autosuspend(&pdev->dev);
pm_runtime_put_sync(&pdev->dev);
@@ -394,7 +431,7 @@
struct platform_device *pdev = to_platform_device(dev);
struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev);
- i2c_dw_disable(i_dev);
+ i_dev->disable(i_dev);
i2c_dw_plat_prepare_clk(i_dev, false);
return 0;
@@ -406,7 +443,7 @@
struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev);
i2c_dw_plat_prepare_clk(i_dev, true);
- i2c_dw_init(i_dev);
+ i_dev->init(i_dev);
return 0;
}
@@ -423,7 +460,7 @@
#define DW_I2C_DEV_PMOPS NULL
#endif
-/* work with hotplug and coldplug */
+/* Work with hotplug and coldplug */
MODULE_ALIAS("platform:i2c_designware");
static struct platform_driver dw_i2c_driver = {
diff --git a/drivers/i2c/busses/i2c-designware-slave.c b/drivers/i2c/busses/i2c-designware-slave.c
new file mode 100644
index 0000000..0548c7e
--- /dev/null
+++ b/drivers/i2c/busses/i2c-designware-slave.c
@@ -0,0 +1,393 @@
+/*
+ * Synopsys DesignWare I2C adapter driver (slave only).
+ *
+ * Based on the Synopsys DesignWare I2C adapter driver (master).
+ *
+ * Copyright (C) 2016 Synopsys Inc.
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ * ----------------------------------------------------------------------------
+ *
+ */
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+
+#include "i2c-designware-core.h"
+
+static void i2c_dw_configure_fifo_slave(struct dw_i2c_dev *dev)
+{
+ /* Configure Tx/Rx FIFO threshold levels. */
+ dw_writel(dev, 0, DW_IC_TX_TL);
+ dw_writel(dev, 0, DW_IC_RX_TL);
+
+ /* Configure the I2C slave. */
+ dw_writel(dev, dev->slave_cfg, DW_IC_CON);
+ dw_writel(dev, DW_IC_INTR_SLAVE_MASK, DW_IC_INTR_MASK);
+}
+
+/**
+ * i2c_dw_init_slave() - Initialize the designware i2c slave hardware
+ * @dev: device private data
+ *
+ * This function configures and enables the I2C in slave mode.
+ * This function is called during I2C init function, and in case of timeout at
+ * run time.
+ */
+static int i2c_dw_init_slave(struct dw_i2c_dev *dev)
+{
+ u32 sda_falling_time, scl_falling_time;
+ u32 reg, comp_param1;
+ u32 hcnt, lcnt;
+ int ret;
+
+ ret = i2c_dw_acquire_lock(dev);
+ if (ret)
+ return ret;
+
+ reg = dw_readl(dev, DW_IC_COMP_TYPE);
+ if (reg == ___constant_swab32(DW_IC_COMP_TYPE_VALUE)) {
+ /* Configure register endianness access. */
+ dev->flags |= ACCESS_SWAP;
+ } else if (reg == (DW_IC_COMP_TYPE_VALUE & 0x0000ffff)) {
+ /* Configure register access mode 16bit. */
+ dev->flags |= ACCESS_16BIT;
+ } else if (reg != DW_IC_COMP_TYPE_VALUE) {
+ dev_err(dev->dev,
+ "Unknown Synopsys component type: 0x%08x\n", reg);
+ i2c_dw_release_lock(dev);
+ return -ENODEV;
+ }
+
+ comp_param1 = dw_readl(dev, DW_IC_COMP_PARAM_1);
+
+ /* Disable the adapter. */
+ __i2c_dw_enable_and_wait(dev, false);
+
+ /* Set standard and fast speed deviders for high/low periods. */
+ sda_falling_time = dev->sda_falling_time ?: 300; /* ns */
+ scl_falling_time = dev->scl_falling_time ?: 300; /* ns */
+
+ /* Set SCL timing parameters for standard-mode. */
+ if (dev->ss_hcnt && dev->ss_lcnt) {
+ hcnt = dev->ss_hcnt;
+ lcnt = dev->ss_lcnt;
+ } else {
+ hcnt = i2c_dw_scl_hcnt(i2c_dw_clk_rate(dev),
+ 4000, /* tHD;STA = tHIGH = 4.0 us */
+ sda_falling_time,
+ 0, /* 0: DW default, 1: Ideal */
+ 0); /* No offset */
+ lcnt = i2c_dw_scl_lcnt(i2c_dw_clk_rate(dev),
+ 4700, /* tLOW = 4.7 us */
+ scl_falling_time,
+ 0); /* No offset */
+ }
+ dw_writel(dev, hcnt, DW_IC_SS_SCL_HCNT);
+ dw_writel(dev, lcnt, DW_IC_SS_SCL_LCNT);
+ dev_dbg(dev->dev, "Standard-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
+
+ /* Set SCL timing parameters for fast-mode or fast-mode plus. */
+ if ((dev->clk_freq == 1000000) && dev->fp_hcnt && dev->fp_lcnt) {
+ hcnt = dev->fp_hcnt;
+ lcnt = dev->fp_lcnt;
+ } else if (dev->fs_hcnt && dev->fs_lcnt) {
+ hcnt = dev->fs_hcnt;
+ lcnt = dev->fs_lcnt;
+ } else {
+ hcnt = i2c_dw_scl_hcnt(i2c_dw_clk_rate(dev),
+ 600, /* tHD;STA = tHIGH = 0.6 us */
+ sda_falling_time,
+ 0, /* 0: DW default, 1: Ideal */
+ 0); /* No offset */
+ lcnt = i2c_dw_scl_lcnt(i2c_dw_clk_rate(dev),
+ 1300, /* tLOW = 1.3 us */
+ scl_falling_time,
+ 0); /* No offset */
+ }
+ dw_writel(dev, hcnt, DW_IC_FS_SCL_HCNT);
+ dw_writel(dev, lcnt, DW_IC_FS_SCL_LCNT);
+ dev_dbg(dev->dev, "Fast-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
+
+ if ((dev->slave_cfg & DW_IC_CON_SPEED_MASK) ==
+ DW_IC_CON_SPEED_HIGH) {
+ if ((comp_param1 & DW_IC_COMP_PARAM_1_SPEED_MODE_MASK)
+ != DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH) {
+ dev_err(dev->dev, "High Speed not supported!\n");
+ dev->slave_cfg &= ~DW_IC_CON_SPEED_MASK;
+ dev->slave_cfg |= DW_IC_CON_SPEED_FAST;
+ } else if (dev->hs_hcnt && dev->hs_lcnt) {
+ hcnt = dev->hs_hcnt;
+ lcnt = dev->hs_lcnt;
+ dw_writel(dev, hcnt, DW_IC_HS_SCL_HCNT);
+ dw_writel(dev, lcnt, DW_IC_HS_SCL_LCNT);
+ dev_dbg(dev->dev, "HighSpeed-mode HCNT:LCNT = %d:%d\n",
+ hcnt, lcnt);
+ }
+ }
+
+ /* Configure SDA Hold Time if required. */
+ reg = dw_readl(dev, DW_IC_COMP_VERSION);
+ if (reg >= DW_IC_SDA_HOLD_MIN_VERS) {
+ if (!dev->sda_hold_time) {
+ /* Keep previous hold time setting if no one set it. */
+ dev->sda_hold_time = dw_readl(dev, DW_IC_SDA_HOLD);
+ }
+ /*
+ * Workaround for avoiding TX arbitration lost in case I2C
+ * slave pulls SDA down "too quickly" after falling egde of
+ * SCL by enabling non-zero SDA RX hold. Specification says it
+ * extends incoming SDA low to high transition while SCL is
+ * high but it apprears to help also above issue.
+ */
+ if (!(dev->sda_hold_time & DW_IC_SDA_HOLD_RX_MASK))
+ dev->sda_hold_time |= 1 << DW_IC_SDA_HOLD_RX_SHIFT;
+ dw_writel(dev, dev->sda_hold_time, DW_IC_SDA_HOLD);
+ } else {
+ dev_warn(dev->dev,
+ "Hardware too old to adjust SDA hold time.\n");
+ }
+
+ i2c_dw_configure_fifo_slave(dev);
+ i2c_dw_release_lock(dev);
+
+ return 0;
+}
+
+static int i2c_dw_reg_slave(struct i2c_client *slave)
+{
+ struct dw_i2c_dev *dev = i2c_get_adapdata(slave->adapter);
+
+ if (dev->slave)
+ return -EBUSY;
+ if (slave->flags & I2C_CLIENT_TEN)
+ return -EAFNOSUPPORT;
+ /*
+ * Set slave address in the IC_SAR register,
+ * the address to which the DW_apb_i2c responds.
+ */
+ __i2c_dw_enable(dev, false);
+ dw_writel(dev, slave->addr, DW_IC_SAR);
+ dev->slave = slave;
+
+ __i2c_dw_enable(dev, true);
+
+ dev->cmd_err = 0;
+ dev->msg_write_idx = 0;
+ dev->msg_read_idx = 0;
+ dev->msg_err = 0;
+ dev->status = STATUS_IDLE;
+ dev->abort_source = 0;
+ dev->rx_outstanding = 0;
+
+ return 0;
+}
+
+static int i2c_dw_unreg_slave(struct i2c_client *slave)
+{
+ struct dw_i2c_dev *dev = i2c_get_adapdata(slave->adapter);
+
+ dev->disable_int(dev);
+ dev->disable(dev);
+ dev->slave = NULL;
+
+ return 0;
+}
+
+static u32 i2c_dw_read_clear_intrbits_slave(struct dw_i2c_dev *dev)
+{
+ u32 stat;
+
+ /*
+ * The IC_INTR_STAT register just indicates "enabled" interrupts.
+ * Ths unmasked raw version of interrupt status bits are available
+ * in the IC_RAW_INTR_STAT register.
+ *
+ * That is,
+ * stat = dw_readl(IC_INTR_STAT);
+ * equals to,
+ * stat = dw_readl(IC_RAW_INTR_STAT) & dw_readl(IC_INTR_MASK);
+ *
+ * The raw version might be useful for debugging purposes.
+ */
+ stat = dw_readl(dev, DW_IC_INTR_STAT);
+
+ /*
+ * Do not use the IC_CLR_INTR register to clear interrupts, or
+ * you'll miss some interrupts, triggered during the period from
+ * dw_readl(IC_INTR_STAT) to dw_readl(IC_CLR_INTR).
+ *
+ * Instead, use the separately-prepared IC_CLR_* registers.
+ */
+ if (stat & DW_IC_INTR_TX_ABRT)
+ dw_readl(dev, DW_IC_CLR_TX_ABRT);
+ if (stat & DW_IC_INTR_RX_UNDER)
+ dw_readl(dev, DW_IC_CLR_RX_UNDER);
+ if (stat & DW_IC_INTR_RX_OVER)
+ dw_readl(dev, DW_IC_CLR_RX_OVER);
+ if (stat & DW_IC_INTR_TX_OVER)
+ dw_readl(dev, DW_IC_CLR_TX_OVER);
+ if (stat & DW_IC_INTR_RX_DONE)
+ dw_readl(dev, DW_IC_CLR_RX_DONE);
+ if (stat & DW_IC_INTR_ACTIVITY)
+ dw_readl(dev, DW_IC_CLR_ACTIVITY);
+ if (stat & DW_IC_INTR_STOP_DET)
+ dw_readl(dev, DW_IC_CLR_STOP_DET);
+ if (stat & DW_IC_INTR_START_DET)
+ dw_readl(dev, DW_IC_CLR_START_DET);
+ if (stat & DW_IC_INTR_GEN_CALL)
+ dw_readl(dev, DW_IC_CLR_GEN_CALL);
+
+ return stat;
+}
+
+/*
+ * Interrupt service routine. This gets called whenever an I2C slave interrupt
+ * occurs.
+ */
+
+static int i2c_dw_irq_handler_slave(struct dw_i2c_dev *dev)
+{
+ u32 raw_stat, stat, enabled;
+ u8 val, slave_activity;
+
+ stat = dw_readl(dev, DW_IC_INTR_STAT);
+ enabled = dw_readl(dev, DW_IC_ENABLE);
+ raw_stat = dw_readl(dev, DW_IC_RAW_INTR_STAT);
+ slave_activity = ((dw_readl(dev, DW_IC_STATUS) &
+ DW_IC_STATUS_SLAVE_ACTIVITY) >> 6);
+
+ if (!enabled || !(raw_stat & ~DW_IC_INTR_ACTIVITY))
+ return 0;
+
+ dev_dbg(dev->dev,
+ "%#x STATUS SLAVE_ACTIVITY=%#x : RAW_INTR_STAT=%#x : INTR_STAT=%#x\n",
+ enabled, slave_activity, raw_stat, stat);
+
+ if ((stat & DW_IC_INTR_RX_FULL) && (stat & DW_IC_INTR_STOP_DET))
+ i2c_slave_event(dev->slave, I2C_SLAVE_WRITE_REQUESTED, &val);
+
+ if (stat & DW_IC_INTR_RD_REQ) {
+ if (slave_activity) {
+ if (stat & DW_IC_INTR_RX_FULL) {
+ val = dw_readl(dev, DW_IC_DATA_CMD);
+
+ if (!i2c_slave_event(dev->slave,
+ I2C_SLAVE_WRITE_RECEIVED,
+ &val)) {
+ dev_vdbg(dev->dev, "Byte %X acked!",
+ val);
+ }
+ dw_readl(dev, DW_IC_CLR_RD_REQ);
+ stat = i2c_dw_read_clear_intrbits_slave(dev);
+ } else {
+ dw_readl(dev, DW_IC_CLR_RD_REQ);
+ dw_readl(dev, DW_IC_CLR_RX_UNDER);
+ stat = i2c_dw_read_clear_intrbits_slave(dev);
+ }
+ if (!i2c_slave_event(dev->slave,
+ I2C_SLAVE_READ_REQUESTED,
+ &val))
+ dw_writel(dev, val, DW_IC_DATA_CMD);
+ }
+ }
+
+ if (stat & DW_IC_INTR_RX_DONE) {
+ if (!i2c_slave_event(dev->slave, I2C_SLAVE_READ_PROCESSED,
+ &val))
+ dw_readl(dev, DW_IC_CLR_RX_DONE);
+
+ i2c_slave_event(dev->slave, I2C_SLAVE_STOP, &val);
+ stat = i2c_dw_read_clear_intrbits_slave(dev);
+ return 1;
+ }
+
+ if (stat & DW_IC_INTR_RX_FULL) {
+ val = dw_readl(dev, DW_IC_DATA_CMD);
+ if (!i2c_slave_event(dev->slave, I2C_SLAVE_WRITE_RECEIVED,
+ &val))
+ dev_vdbg(dev->dev, "Byte %X acked!", val);
+ } else {
+ i2c_slave_event(dev->slave, I2C_SLAVE_STOP, &val);
+ stat = i2c_dw_read_clear_intrbits_slave(dev);
+ }
+
+ return 1;
+}
+
+static irqreturn_t i2c_dw_isr_slave(int this_irq, void *dev_id)
+{
+ struct dw_i2c_dev *dev = dev_id;
+ int ret;
+
+ i2c_dw_read_clear_intrbits_slave(dev);
+ ret = i2c_dw_irq_handler_slave(dev);
+ if (ret > 0)
+ complete(&dev->cmd_complete);
+
+ return IRQ_RETVAL(ret);
+}
+
+static struct i2c_algorithm i2c_dw_algo = {
+ .functionality = i2c_dw_func,
+ .reg_slave = i2c_dw_reg_slave,
+ .unreg_slave = i2c_dw_unreg_slave,
+};
+
+int i2c_dw_probe_slave(struct dw_i2c_dev *dev)
+{
+ struct i2c_adapter *adap = &dev->adapter;
+ int ret;
+
+ init_completion(&dev->cmd_complete);
+
+ dev->init = i2c_dw_init_slave;
+ dev->disable = i2c_dw_disable;
+ dev->disable_int = i2c_dw_disable_int;
+
+ ret = dev->init(dev);
+ if (ret)
+ return ret;
+
+ snprintf(adap->name, sizeof(adap->name),
+ "Synopsys DesignWare I2C Slave adapter");
+ adap->retries = 3;
+ adap->algo = &i2c_dw_algo;
+ adap->dev.parent = dev->dev;
+ i2c_set_adapdata(adap, dev);
+
+ ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr_slave,
+ IRQF_SHARED, dev_name(dev->dev), dev);
+ if (ret) {
+ dev_err(dev->dev, "failure requesting irq %i: %d\n",
+ dev->irq, ret);
+ return ret;
+ }
+
+ ret = i2c_add_numbered_adapter(adap);
+ if (ret)
+ dev_err(dev->dev, "failure adding adapter: %d\n", ret);
+ pm_runtime_put_noidle(dev->dev);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(i2c_dw_probe_slave);
+
+MODULE_AUTHOR("Luis Oliveira <lolivei@synopsys.com>");
+MODULE_DESCRIPTION("Synopsys DesignWare I2C bus slave adapter");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/i2c/busses/i2c-emev2.c b/drivers/i2c/busses/i2c-emev2.c
index 3129127..d2e8448 100644
--- a/drivers/i2c/busses/i2c-emev2.c
+++ b/drivers/i2c/busses/i2c-emev2.c
@@ -375,7 +375,9 @@
if (IS_ERR(priv->sclk))
return PTR_ERR(priv->sclk);
- clk_prepare_enable(priv->sclk);
+ ret = clk_prepare_enable(priv->sclk);
+ if (ret)
+ return ret;
priv->adap.timeout = msecs_to_jiffies(100);
priv->adap.retries = 5;
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 6484fa6..c9536e1 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -66,6 +66,8 @@
* Lewisburg Supersku (PCH) 0xa223 32 hard yes yes yes
* Kaby Lake PCH-H (PCH) 0xa2a3 32 hard yes yes yes
* Gemini Lake (SOC) 0x31d4 32 hard yes yes yes
+ * Cannon Lake-H (PCH) 0xa323 32 hard yes yes yes
+ * Cannon Lake-LP (PCH) 0x9da3 32 hard yes yes yes
*
* Features supported by this driver:
* Software PEC no
@@ -226,10 +228,12 @@
#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS 0x9c22
#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS 0x9ca2
#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS 0x9d23
+#define PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS 0x9da3
#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS 0xa123
#define PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS 0xa1a3
#define PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS 0xa223
#define PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS 0xa2a3
+#define PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS 0xa323
struct i801_mux_config {
char *gpio_chip;
@@ -1026,6 +1030,8 @@
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS) },
{ 0, }
};
@@ -1499,6 +1505,8 @@
switch (dev->device) {
case PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS:
case PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS:
+ case PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS:
+ case PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS:
case PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS:
case PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS:
case PCI_DEVICE_ID_INTEL_DNV_SMBUS:
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 5738556..d4e8f19 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -419,7 +419,7 @@
ret = mxs_i2c_pio_wait_xfer_end(i2c);
if (ret) {
- dev_err(i2c->dev,
+ dev_dbg(i2c->dev,
"PIO: Failed to send SELECT command!\n");
goto cleanup;
}
@@ -431,7 +431,7 @@
ret = mxs_i2c_pio_wait_xfer_end(i2c);
if (ret) {
- dev_err(i2c->dev,
+ dev_dbg(i2c->dev,
"PIO: Failed to send READ command!\n");
goto cleanup;
}
@@ -528,7 +528,7 @@
/* Wait for the end of the transfer. */
ret = mxs_i2c_pio_wait_xfer_end(i2c);
if (ret) {
- dev_err(i2c->dev,
+ dev_dbg(i2c->dev,
"PIO: Failed to finish WRITE cmd!\n");
break;
}
diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c
index 3bd2e7d..853a2ab 100644
--- a/drivers/i2c/busses/i2c-pca-platform.c
+++ b/drivers/i2c/busses/i2c-pca-platform.c
@@ -22,14 +22,17 @@
#include <linux/i2c-algo-pca.h>
#include <linux/i2c-pca-platform.h>
#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <asm/irq.h>
struct i2c_pca_pf_data {
void __iomem *reg_base;
int irq; /* if 0, use polling */
- int gpio;
+ struct gpio_desc *gpio;
wait_queue_head_t wait;
struct i2c_adapter adap;
struct i2c_algo_pca_data algo_data;
@@ -104,17 +107,17 @@
static void i2c_pca_pf_dummyreset(void *pd)
{
struct i2c_pca_pf_data *i2c = pd;
- printk(KERN_WARNING "%s: No reset-pin found. Chip may get stuck!\n",
- i2c->adap.name);
+
+ dev_warn(&i2c->adap.dev, "No reset-pin found. Chip may get stuck!\n");
}
static void i2c_pca_pf_resetchip(void *pd)
{
struct i2c_pca_pf_data *i2c = pd;
- gpio_set_value(i2c->gpio, 0);
+ gpiod_set_value(i2c->gpio, 1);
ndelay(100);
- gpio_set_value(i2c->gpio, 1);
+ gpiod_set_value(i2c->gpio, 0);
}
static irqreturn_t i2c_pca_pf_handler(int this_irq, void *dev_id)
@@ -136,36 +139,27 @@
struct resource *res;
struct i2c_pca9564_pf_platform_data *platform_data =
dev_get_platdata(&pdev->dev);
+ struct device_node *np = pdev->dev.of_node;
int ret = 0;
int irq;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
/* If irq is 0, we do polling. */
+ if (irq < 0)
+ irq = 0;
- if (res == NULL) {
- ret = -ENODEV;
- goto e_print;
- }
+ i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
+ if (!i2c)
+ return -ENOMEM;
- if (!request_mem_region(res->start, resource_size(res), res->name)) {
- ret = -ENOMEM;
- goto e_print;
- }
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ i2c->reg_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(i2c->reg_base))
+ return PTR_ERR(i2c->reg_base);
- i2c = kzalloc(sizeof(struct i2c_pca_pf_data), GFP_KERNEL);
- if (!i2c) {
- ret = -ENOMEM;
- goto e_alloc;
- }
init_waitqueue_head(&i2c->wait);
- i2c->reg_base = ioremap(res->start, resource_size(res));
- if (!i2c->reg_base) {
- ret = -ENOMEM;
- goto e_remap;
- }
i2c->io_base = res->start;
i2c->io_size = resource_size(res);
i2c->irq = irq;
@@ -177,20 +171,43 @@
(unsigned long) res->start);
i2c->adap.algo_data = &i2c->algo_data;
i2c->adap.dev.parent = &pdev->dev;
+ i2c->adap.dev.of_node = np;
if (platform_data) {
i2c->adap.timeout = platform_data->timeout;
i2c->algo_data.i2c_clock = platform_data->i2c_clock_speed;
- i2c->gpio = platform_data->gpio;
+ if (gpio_is_valid(platform_data->gpio)) {
+ ret = devm_gpio_request_one(&pdev->dev,
+ platform_data->gpio,
+ GPIOF_ACTIVE_LOW,
+ i2c->adap.name);
+ if (ret == 0) {
+ i2c->gpio = gpio_to_desc(platform_data->gpio);
+ gpiod_direction_output(i2c->gpio, 0);
+ } else {
+ dev_warn(&pdev->dev, "Registering gpio failed!\n");
+ i2c->gpio = NULL;
+ }
+ }
+ } else if (np) {
+ i2c->adap.timeout = HZ;
+ i2c->gpio = devm_gpiod_get_optional(&pdev->dev, "reset-gpios", GPIOD_OUT_LOW);
+ if (IS_ERR(i2c->gpio))
+ return PTR_ERR(i2c->gpio);
+ of_property_read_u32_index(np, "clock-frequency", 0,
+ &i2c->algo_data.i2c_clock);
} else {
i2c->adap.timeout = HZ;
i2c->algo_data.i2c_clock = 59000;
- i2c->gpio = -1;
+ i2c->gpio = NULL;
}
i2c->algo_data.data = i2c;
i2c->algo_data.wait_for_completion = i2c_pca_pf_waitforcompletion;
- i2c->algo_data.reset_chip = i2c_pca_pf_dummyreset;
+ if (i2c->gpio)
+ i2c->algo_data.reset_chip = i2c_pca_pf_resetchip;
+ else
+ i2c->algo_data.reset_chip = i2c_pca_pf_dummyreset;
switch (res->flags & IORESOURCE_MEM_TYPE_MASK) {
case IORESOURCE_MEM_32BIT:
@@ -208,52 +225,22 @@
break;
}
- /* Use gpio_is_valid() when in mainline */
- if (i2c->gpio > -1) {
- ret = gpio_request(i2c->gpio, i2c->adap.name);
- if (ret == 0) {
- gpio_direction_output(i2c->gpio, 1);
- i2c->algo_data.reset_chip = i2c_pca_pf_resetchip;
- } else {
- printk(KERN_WARNING "%s: Registering gpio failed!\n",
- i2c->adap.name);
- i2c->gpio = ret;
- }
- }
-
if (irq) {
- ret = request_irq(irq, i2c_pca_pf_handler,
+ ret = devm_request_irq(&pdev->dev, irq, i2c_pca_pf_handler,
IRQF_TRIGGER_FALLING, pdev->name, i2c);
if (ret)
- goto e_reqirq;
+ return ret;
}
- if (i2c_pca_add_numbered_bus(&i2c->adap) < 0) {
- ret = -ENODEV;
- goto e_adapt;
- }
+ ret = i2c_pca_add_numbered_bus(&i2c->adap);
+ if (ret)
+ return ret;
platform_set_drvdata(pdev, i2c);
- printk(KERN_INFO "%s registered.\n", i2c->adap.name);
+ dev_info(&pdev->dev, "registered.\n");
return 0;
-
-e_adapt:
- if (irq)
- free_irq(irq, i2c);
-e_reqirq:
- if (i2c->gpio > -1)
- gpio_free(i2c->gpio);
-
- iounmap(i2c->reg_base);
-e_remap:
- kfree(i2c);
-e_alloc:
- release_mem_region(res->start, resource_size(res));
-e_print:
- printk(KERN_ERR "Registering PCA9564/PCA9665 FAILED! (%d)\n", ret);
- return ret;
}
static int i2c_pca_pf_remove(struct platform_device *pdev)
@@ -262,24 +249,24 @@
i2c_del_adapter(&i2c->adap);
- if (i2c->irq)
- free_irq(i2c->irq, i2c);
-
- if (i2c->gpio > -1)
- gpio_free(i2c->gpio);
-
- iounmap(i2c->reg_base);
- release_mem_region(i2c->io_base, i2c->io_size);
- kfree(i2c);
-
return 0;
}
+#ifdef CONFIG_OF
+static const struct of_device_id i2c_pca_of_match_table[] = {
+ { .compatible = "nxp,pca9564" },
+ { .compatible = "nxp,pca9665" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, i2c_pca_of_match_table);
+#endif
+
static struct platform_driver i2c_pca_pf_driver = {
.probe = i2c_pca_pf_probe,
.remove = i2c_pca_pf_remove,
.driver = {
.name = "i2c-pca-platform",
+ .of_match_table = of_match_ptr(i2c_pca_of_match_table),
},
};
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index 8be3e6c..93c1a54 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -1,5 +1,5 @@
/*
- * Driver for the Renesas RCar I2C unit
+ * Driver for the Renesas R-Car I2C unit
*
* Copyright (C) 2014-15 Wolfram Sang <wsa@sang-engineering.com>
* Copyright (C) 2011-2015 Renesas Electronics Corporation
@@ -783,7 +783,12 @@
static u32 rcar_i2c_func(struct i2c_adapter *adap)
{
- /* This HW can't do SMBUS_QUICK and NOSTART */
+ /*
+ * This HW can't do:
+ * I2C_SMBUS_QUICK (setting FSB during START didn't work)
+ * I2C_M_NOSTART (automatically sends address after START)
+ * I2C_M_IGNORE_NAK (automatically sends STOP after NAK)
+ */
return I2C_FUNC_I2C | I2C_FUNC_SLAVE |
(I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
}
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 3d75593..2e097d9 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -24,7 +24,6 @@
#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/i2c.h>
-#include <linux/i2c/i2c-sh_mobile.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
@@ -879,10 +878,10 @@
static int sh_mobile_i2c_probe(struct platform_device *dev)
{
- struct i2c_sh_mobile_platform_data *pdata = dev_get_platdata(&dev->dev);
struct sh_mobile_i2c_data *pd;
struct i2c_adapter *adap;
struct resource *res;
+ const struct of_device_id *match;
int ret;
u32 bus_speed;
@@ -910,30 +909,18 @@
if (IS_ERR(pd->reg))
return PTR_ERR(pd->reg);
- /* Use platform data bus speed or STANDARD_MODE */
ret = of_property_read_u32(dev->dev.of_node, "clock-frequency", &bus_speed);
pd->bus_speed = ret ? STANDARD_MODE : bus_speed;
-
pd->clks_per_count = 1;
- if (dev->dev.of_node) {
- const struct of_device_id *match;
+ match = of_match_device(sh_mobile_i2c_dt_ids, &dev->dev);
+ if (match) {
+ const struct sh_mobile_dt_config *config = match->data;
- match = of_match_device(sh_mobile_i2c_dt_ids, &dev->dev);
- if (match) {
- const struct sh_mobile_dt_config *config;
+ pd->clks_per_count = config->clks_per_count;
- config = match->data;
- pd->clks_per_count = config->clks_per_count;
-
- if (config->setup)
- config->setup(pd);
- }
- } else {
- if (pdata && pdata->bus_speed)
- pd->bus_speed = pdata->bus_speed;
- if (pdata && pdata->clks_per_count)
- pd->clks_per_count = pdata->clks_per_count;
+ if (config->setup)
+ config->setup(pd);
}
/* The IIC blocks on SH-Mobile ARM processors
diff --git a/drivers/i2c/busses/i2c-xgene-slimpro.c b/drivers/i2c/busses/i2c-xgene-slimpro.c
index 6ba6c83..7e89ba6 100644
--- a/drivers/i2c/busses/i2c-xgene-slimpro.c
+++ b/drivers/i2c/busses/i2c-xgene-slimpro.c
@@ -22,10 +22,12 @@
* using the APM X-Gene SLIMpro mailbox driver.
*
*/
+#include <acpi/pcc.h>
#include <linux/acpi.h>
#include <linux/dma-mapping.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
+#include <linux/io.h>
#include <linux/mailbox_client.h>
#include <linux/module.h>
#include <linux/of.h>
@@ -89,6 +91,8 @@
((addrlen << SLIMPRO_IIC_ADDRLEN_SHIFT) & SLIMPRO_IIC_ADDRLEN_MASK) | \
((datalen << SLIMPRO_IIC_DATALEN_SHIFT) & SLIMPRO_IIC_DATALEN_MASK))
+#define SLIMPRO_MSG_TYPE(v) (((v) & 0xF0000000) >> 28)
+
/*
* Encode for upper address for block data
*/
@@ -99,19 +103,47 @@
& 0x3FF00000))
#define SLIMPRO_IIC_ENCODE_ADDR(a) ((a) & 0x000FFFFF)
+#define SLIMPRO_IIC_MSG_DWORD_COUNT 3
+
+/* PCC related defines */
+#define PCC_SIGNATURE 0x50424300
+#define PCC_STS_CMD_COMPLETE BIT(0)
+#define PCC_STS_SCI_DOORBELL BIT(1)
+#define PCC_STS_ERR BIT(2)
+#define PCC_STS_PLAT_NOTIFY BIT(3)
+#define PCC_CMD_GENERATE_DB_INT BIT(15)
+
struct slimpro_i2c_dev {
struct i2c_adapter adapter;
struct device *dev;
struct mbox_chan *mbox_chan;
struct mbox_client mbox_client;
+ int mbox_idx;
struct completion rd_complete;
u8 dma_buffer[I2C_SMBUS_BLOCK_MAX + 1]; /* dma_buffer[0] is used for length */
u32 *resp_msg;
+ phys_addr_t comm_base_addr;
+ void *pcc_comm_addr;
};
#define to_slimpro_i2c_dev(cl) \
container_of(cl, struct slimpro_i2c_dev, mbox_client)
+/*
+ * This function tests and clears a bitmask then returns its old value
+ */
+static u16 xgene_word_tst_and_clr(u16 *addr, u16 mask)
+{
+ u16 ret, val;
+
+ val = le16_to_cpu(READ_ONCE(*addr));
+ ret = val & mask;
+ val &= ~mask;
+ WRITE_ONCE(*addr, cpu_to_le16(val));
+
+ return ret;
+}
+
static void slimpro_i2c_rx_cb(struct mbox_client *cl, void *mssg)
{
struct slimpro_i2c_dev *ctx = to_slimpro_i2c_dev(cl);
@@ -129,9 +161,53 @@
complete(&ctx->rd_complete);
}
+static void slimpro_i2c_pcc_rx_cb(struct mbox_client *cl, void *msg)
+{
+ struct slimpro_i2c_dev *ctx = to_slimpro_i2c_dev(cl);
+ struct acpi_pcct_shared_memory *generic_comm_base = ctx->pcc_comm_addr;
+
+ /* Check if platform sends interrupt */
+ if (!xgene_word_tst_and_clr(&generic_comm_base->status,
+ PCC_STS_SCI_DOORBELL))
+ return;
+
+ if (xgene_word_tst_and_clr(&generic_comm_base->status,
+ PCC_STS_CMD_COMPLETE)) {
+ msg = generic_comm_base + 1;
+
+ /* Response message msg[1] contains the return value. */
+ if (ctx->resp_msg)
+ *ctx->resp_msg = ((u32 *)msg)[1];
+
+ complete(&ctx->rd_complete);
+ }
+}
+
+static void slimpro_i2c_pcc_tx_prepare(struct slimpro_i2c_dev *ctx, u32 *msg)
+{
+ struct acpi_pcct_shared_memory *generic_comm_base = ctx->pcc_comm_addr;
+ u32 *ptr = (void *)(generic_comm_base + 1);
+ u16 status;
+ int i;
+
+ WRITE_ONCE(generic_comm_base->signature,
+ cpu_to_le32(PCC_SIGNATURE | ctx->mbox_idx));
+
+ WRITE_ONCE(generic_comm_base->command,
+ cpu_to_le16(SLIMPRO_MSG_TYPE(msg[0]) | PCC_CMD_GENERATE_DB_INT));
+
+ status = le16_to_cpu(READ_ONCE(generic_comm_base->status));
+ status &= ~PCC_STS_CMD_COMPLETE;
+ WRITE_ONCE(generic_comm_base->status, cpu_to_le16(status));
+
+ /* Copy the message to the PCC comm space */
+ for (i = 0; i < SLIMPRO_IIC_MSG_DWORD_COUNT; i++)
+ WRITE_ONCE(ptr[i], cpu_to_le32(msg[i]));
+}
+
static int start_i2c_msg_xfer(struct slimpro_i2c_dev *ctx)
{
- if (ctx->mbox_client.tx_block) {
+ if (ctx->mbox_client.tx_block || !acpi_disabled) {
if (!wait_for_completion_timeout(&ctx->rd_complete,
msecs_to_jiffies(MAILBOX_OP_TIMEOUT)))
return -ETIMEDOUT;
@@ -144,26 +220,46 @@
return 0;
}
+static int slimpro_i2c_send_msg(struct slimpro_i2c_dev *ctx,
+ u32 *msg,
+ u32 *data)
+{
+ int rc;
+
+ ctx->resp_msg = data;
+
+ if (!acpi_disabled) {
+ reinit_completion(&ctx->rd_complete);
+ slimpro_i2c_pcc_tx_prepare(ctx, msg);
+ }
+
+ rc = mbox_send_message(ctx->mbox_chan, msg);
+ if (rc < 0)
+ goto err;
+
+ rc = start_i2c_msg_xfer(ctx);
+
+err:
+ if (!acpi_disabled)
+ mbox_chan_txdone(ctx->mbox_chan, 0);
+
+ ctx->resp_msg = NULL;
+
+ return rc;
+}
+
static int slimpro_i2c_rd(struct slimpro_i2c_dev *ctx, u32 chip,
u32 addr, u32 addrlen, u32 protocol,
u32 readlen, u32 *data)
{
u32 msg[3];
- int rc;
msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip,
SLIMPRO_IIC_READ, protocol, addrlen, readlen);
msg[1] = SLIMPRO_IIC_ENCODE_ADDR(addr);
msg[2] = 0;
- ctx->resp_msg = data;
- rc = mbox_send_message(ctx->mbox_chan, &msg);
- if (rc < 0)
- goto err;
- rc = start_i2c_msg_xfer(ctx);
-err:
- ctx->resp_msg = NULL;
- return rc;
+ return slimpro_i2c_send_msg(ctx, msg, data);
}
static int slimpro_i2c_wr(struct slimpro_i2c_dev *ctx, u32 chip,
@@ -171,22 +267,13 @@
u32 data)
{
u32 msg[3];
- int rc;
msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip,
SLIMPRO_IIC_WRITE, protocol, addrlen, writelen);
msg[1] = SLIMPRO_IIC_ENCODE_ADDR(addr);
msg[2] = data;
- ctx->resp_msg = msg;
- rc = mbox_send_message(ctx->mbox_chan, &msg);
- if (rc < 0)
- goto err;
-
- rc = start_i2c_msg_xfer(ctx);
-err:
- ctx->resp_msg = NULL;
- return rc;
+ return slimpro_i2c_send_msg(ctx, msg, msg);
}
static int slimpro_i2c_blkrd(struct slimpro_i2c_dev *ctx, u32 chip, u32 addr,
@@ -201,8 +288,7 @@
if (dma_mapping_error(ctx->dev, paddr)) {
dev_err(&ctx->adapter.dev, "Error in mapping dma buffer %p\n",
ctx->dma_buffer);
- rc = -ENOMEM;
- goto err;
+ return -ENOMEM;
}
msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip, SLIMPRO_IIC_READ,
@@ -212,21 +298,13 @@
SLIMPRO_IIC_ENCODE_UPPER_BUFADDR(paddr) |
SLIMPRO_IIC_ENCODE_ADDR(addr);
msg[2] = (u32)paddr;
- ctx->resp_msg = msg;
- rc = mbox_send_message(ctx->mbox_chan, &msg);
- if (rc < 0)
- goto err_unmap;
-
- rc = start_i2c_msg_xfer(ctx);
+ rc = slimpro_i2c_send_msg(ctx, msg, msg);
/* Copy to destination */
memcpy(data, ctx->dma_buffer, readlen);
-err_unmap:
dma_unmap_single(ctx->dev, paddr, readlen, DMA_FROM_DEVICE);
-err:
- ctx->resp_msg = NULL;
return rc;
}
@@ -244,8 +322,7 @@
if (dma_mapping_error(ctx->dev, paddr)) {
dev_err(&ctx->adapter.dev, "Error in mapping dma buffer %p\n",
ctx->dma_buffer);
- rc = -ENOMEM;
- goto err;
+ return -ENOMEM;
}
msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip, SLIMPRO_IIC_WRITE,
@@ -254,21 +331,13 @@
SLIMPRO_IIC_ENCODE_UPPER_BUFADDR(paddr) |
SLIMPRO_IIC_ENCODE_ADDR(addr);
msg[2] = (u32)paddr;
- ctx->resp_msg = msg;
if (ctx->mbox_client.tx_block)
reinit_completion(&ctx->rd_complete);
- rc = mbox_send_message(ctx->mbox_chan, &msg);
- if (rc < 0)
- goto err_unmap;
+ rc = slimpro_i2c_send_msg(ctx, msg, msg);
- rc = start_i2c_msg_xfer(ctx);
-
-err_unmap:
dma_unmap_single(ctx->dev, paddr, writelen, DMA_TO_DEVICE);
-err:
- ctx->resp_msg = NULL;
return rc;
}
@@ -394,17 +463,73 @@
/* Request mailbox channel */
cl->dev = &pdev->dev;
- cl->rx_callback = slimpro_i2c_rx_cb;
- cl->tx_block = true;
init_completion(&ctx->rd_complete);
cl->tx_tout = MAILBOX_OP_TIMEOUT;
cl->knows_txdone = false;
- ctx->mbox_chan = mbox_request_channel(cl, MAILBOX_I2C_INDEX);
- if (IS_ERR(ctx->mbox_chan)) {
- dev_err(&pdev->dev, "i2c mailbox channel request failed\n");
- return PTR_ERR(ctx->mbox_chan);
- }
+ if (acpi_disabled) {
+ cl->tx_block = true;
+ cl->rx_callback = slimpro_i2c_rx_cb;
+ ctx->mbox_chan = mbox_request_channel(cl, MAILBOX_I2C_INDEX);
+ if (IS_ERR(ctx->mbox_chan)) {
+ dev_err(&pdev->dev, "i2c mailbox channel request failed\n");
+ return PTR_ERR(ctx->mbox_chan);
+ }
+ } else {
+ struct acpi_pcct_hw_reduced *cppc_ss;
+ if (device_property_read_u32(&pdev->dev, "pcc-channel",
+ &ctx->mbox_idx))
+ ctx->mbox_idx = MAILBOX_I2C_INDEX;
+
+ cl->tx_block = false;
+ cl->rx_callback = slimpro_i2c_pcc_rx_cb;
+ ctx->mbox_chan = pcc_mbox_request_channel(cl, ctx->mbox_idx);
+ if (IS_ERR(ctx->mbox_chan)) {
+ dev_err(&pdev->dev, "PCC mailbox channel request failed\n");
+ return PTR_ERR(ctx->mbox_chan);
+ }
+
+ /*
+ * The PCC mailbox controller driver should
+ * have parsed the PCCT (global table of all
+ * PCC channels) and stored pointers to the
+ * subspace communication region in con_priv.
+ */
+ cppc_ss = ctx->mbox_chan->con_priv;
+ if (!cppc_ss) {
+ dev_err(&pdev->dev, "PPC subspace not found\n");
+ rc = -ENOENT;
+ goto mbox_err;
+ }
+
+ if (!ctx->mbox_chan->mbox->txdone_irq) {
+ dev_err(&pdev->dev, "PCC IRQ not supported\n");
+ rc = -ENOENT;
+ goto mbox_err;
+ }
+
+ /*
+ * This is the shared communication region
+ * for the OS and Platform to communicate over.
+ */
+ ctx->comm_base_addr = cppc_ss->base_address;
+ if (ctx->comm_base_addr) {
+ ctx->pcc_comm_addr = memremap(ctx->comm_base_addr,
+ cppc_ss->length,
+ MEMREMAP_WB);
+ } else {
+ dev_err(&pdev->dev, "Failed to get PCC comm region\n");
+ rc = -ENOENT;
+ goto mbox_err;
+ }
+
+ if (!ctx->pcc_comm_addr) {
+ dev_err(&pdev->dev,
+ "Failed to ioremap PCC comm region\n");
+ rc = -ENOMEM;
+ goto mbox_err;
+ }
+ }
rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
if (rc)
dev_warn(&pdev->dev, "Unable to set dma mask\n");
@@ -419,13 +544,19 @@
ACPI_COMPANION_SET(&adapter->dev, ACPI_COMPANION(&pdev->dev));
i2c_set_adapdata(adapter, ctx);
rc = i2c_add_adapter(adapter);
- if (rc) {
- mbox_free_channel(ctx->mbox_chan);
- return rc;
- }
+ if (rc)
+ goto mbox_err;
dev_info(&pdev->dev, "Mailbox I2C Adapter registered\n");
return 0;
+
+mbox_err:
+ if (acpi_disabled)
+ mbox_free_channel(ctx->mbox_chan);
+ else
+ pcc_mbox_free_channel(ctx->mbox_chan);
+
+ return rc;
}
static int xgene_slimpro_i2c_remove(struct platform_device *pdev)
@@ -434,7 +565,10 @@
i2c_del_adapter(&ctx->adapter);
- mbox_free_channel(ctx->mbox_chan);
+ if (acpi_disabled)
+ mbox_free_channel(ctx->mbox_chan);
+ else
+ pcc_mbox_free_channel(ctx->mbox_chan);
return 0;
}
diff --git a/drivers/i2c/busses/i2c-xlp9xx.c b/drivers/i2c/busses/i2c-xlp9xx.c
index ae80228..6b106e9 100644
--- a/drivers/i2c/busses/i2c-xlp9xx.c
+++ b/drivers/i2c/busses/i2c-xlp9xx.c
@@ -393,6 +393,7 @@
init_completion(&priv->msg_complete);
priv->adapter.dev.parent = &pdev->dev;
priv->adapter.algo = &xlp9xx_i2c_algo;
+ priv->adapter.class = I2C_CLASS_HWMON;
ACPI_COMPANION_SET(&priv->adapter.dev, ACPI_COMPANION(&pdev->dev));
priv->adapter.dev.of_node = pdev->dev.of_node;
priv->dev = &pdev->dev;
diff --git a/drivers/i2c/busses/i2c-zx2967.c b/drivers/i2c/busses/i2c-zx2967.c
new file mode 100644
index 0000000..48281c1
--- /dev/null
+++ b/drivers/i2c/busses/i2c-zx2967.c
@@ -0,0 +1,609 @@
+/*
+ * Copyright (C) 2017 Sanechips Technology Co., Ltd.
+ * Copyright 2017 Linaro Ltd.
+ *
+ * Author: Baoyou Xie <baoyou.xie@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#define REG_CMD 0x04
+#define REG_DEVADDR_H 0x0C
+#define REG_DEVADDR_L 0x10
+#define REG_CLK_DIV_FS 0x14
+#define REG_CLK_DIV_HS 0x18
+#define REG_WRCONF 0x1C
+#define REG_RDCONF 0x20
+#define REG_DATA 0x24
+#define REG_STAT 0x28
+
+#define I2C_STOP 0
+#define I2C_MASTER BIT(0)
+#define I2C_ADDR_MODE_TEN BIT(1)
+#define I2C_IRQ_MSK_ENABLE BIT(3)
+#define I2C_RW_READ BIT(4)
+#define I2C_CMB_RW_EN BIT(5)
+#define I2C_START BIT(6)
+
+#define I2C_ADDR_LOW_MASK GENMASK(6, 0)
+#define I2C_ADDR_LOW_SHIFT 0
+#define I2C_ADDR_HI_MASK GENMASK(2, 0)
+#define I2C_ADDR_HI_SHIFT 7
+
+#define I2C_WFIFO_RESET BIT(7)
+#define I2C_RFIFO_RESET BIT(7)
+
+#define I2C_IRQ_ACK_CLEAR BIT(7)
+#define I2C_INT_MASK GENMASK(6, 0)
+
+#define I2C_TRANS_DONE BIT(0)
+#define I2C_SR_EDEVICE BIT(1)
+#define I2C_SR_EDATA BIT(2)
+
+#define I2C_FIFO_MAX 16
+
+#define I2C_TIMEOUT msecs_to_jiffies(1000)
+
+#define DEV(i2c) ((i2c)->adap.dev.parent)
+
+struct zx2967_i2c {
+ struct i2c_adapter adap;
+ struct clk *clk;
+ struct completion complete;
+ u32 clk_freq;
+ void __iomem *reg_base;
+ size_t residue;
+ int irq;
+ int msg_rd;
+ u8 *cur_trans;
+ u8 access_cnt;
+ bool is_suspended;
+ int error;
+};
+
+static void zx2967_i2c_writel(struct zx2967_i2c *i2c,
+ u32 val, unsigned long reg)
+{
+ writel_relaxed(val, i2c->reg_base + reg);
+}
+
+static u32 zx2967_i2c_readl(struct zx2967_i2c *i2c, unsigned long reg)
+{
+ return readl_relaxed(i2c->reg_base + reg);
+}
+
+static void zx2967_i2c_writesb(struct zx2967_i2c *i2c,
+ void *data, unsigned long reg, int len)
+{
+ writesb(i2c->reg_base + reg, data, len);
+}
+
+static void zx2967_i2c_readsb(struct zx2967_i2c *i2c,
+ void *data, unsigned long reg, int len)
+{
+ readsb(i2c->reg_base + reg, data, len);
+}
+
+static void zx2967_i2c_start_ctrl(struct zx2967_i2c *i2c)
+{
+ u32 status;
+ u32 ctl;
+
+ status = zx2967_i2c_readl(i2c, REG_STAT);
+ status |= I2C_IRQ_ACK_CLEAR;
+ zx2967_i2c_writel(i2c, status, REG_STAT);
+
+ ctl = zx2967_i2c_readl(i2c, REG_CMD);
+ if (i2c->msg_rd)
+ ctl |= I2C_RW_READ;
+ else
+ ctl &= ~I2C_RW_READ;
+ ctl &= ~I2C_CMB_RW_EN;
+ ctl |= I2C_START;
+ zx2967_i2c_writel(i2c, ctl, REG_CMD);
+}
+
+static void zx2967_i2c_flush_fifos(struct zx2967_i2c *i2c)
+{
+ u32 offset;
+ u32 val;
+
+ if (i2c->msg_rd) {
+ offset = REG_RDCONF;
+ val = I2C_RFIFO_RESET;
+ } else {
+ offset = REG_WRCONF;
+ val = I2C_WFIFO_RESET;
+ }
+
+ val |= zx2967_i2c_readl(i2c, offset);
+ zx2967_i2c_writel(i2c, val, offset);
+}
+
+static int zx2967_i2c_empty_rx_fifo(struct zx2967_i2c *i2c, u32 size)
+{
+ u8 val[I2C_FIFO_MAX] = {0};
+ int i;
+
+ if (size > I2C_FIFO_MAX) {
+ dev_err(DEV(i2c), "fifo size %d over the max value %d\n",
+ size, I2C_FIFO_MAX);
+ return -EINVAL;
+ }
+
+ zx2967_i2c_readsb(i2c, val, REG_DATA, size);
+ for (i = 0; i < size; i++) {
+ *i2c->cur_trans++ = val[i];
+ i2c->residue--;
+ }
+
+ barrier();
+
+ return 0;
+}
+
+static int zx2967_i2c_fill_tx_fifo(struct zx2967_i2c *i2c)
+{
+ size_t residue = i2c->residue;
+ u8 *buf = i2c->cur_trans;
+
+ if (residue == 0) {
+ dev_err(DEV(i2c), "residue is %d\n", (int)residue);
+ return -EINVAL;
+ }
+
+ if (residue <= I2C_FIFO_MAX) {
+ zx2967_i2c_writesb(i2c, buf, REG_DATA, residue);
+
+ /* Again update before writing to FIFO to make sure isr sees. */
+ i2c->residue = 0;
+ i2c->cur_trans = NULL;
+ } else {
+ zx2967_i2c_writesb(i2c, buf, REG_DATA, I2C_FIFO_MAX);
+ i2c->residue -= I2C_FIFO_MAX;
+ i2c->cur_trans += I2C_FIFO_MAX;
+ }
+
+ barrier();
+
+ return 0;
+}
+
+static int zx2967_i2c_reset_hardware(struct zx2967_i2c *i2c)
+{
+ u32 val;
+ u32 clk_div;
+
+ val = I2C_MASTER | I2C_IRQ_MSK_ENABLE;
+ zx2967_i2c_writel(i2c, val, REG_CMD);
+
+ clk_div = clk_get_rate(i2c->clk) / i2c->clk_freq - 1;
+ zx2967_i2c_writel(i2c, clk_div, REG_CLK_DIV_FS);
+ zx2967_i2c_writel(i2c, clk_div, REG_CLK_DIV_HS);
+
+ zx2967_i2c_writel(i2c, I2C_FIFO_MAX - 1, REG_WRCONF);
+ zx2967_i2c_writel(i2c, I2C_FIFO_MAX - 1, REG_RDCONF);
+ zx2967_i2c_writel(i2c, 1, REG_RDCONF);
+
+ zx2967_i2c_flush_fifos(i2c);
+
+ return 0;
+}
+
+static void zx2967_i2c_isr_clr(struct zx2967_i2c *i2c)
+{
+ u32 status;
+
+ status = zx2967_i2c_readl(i2c, REG_STAT);
+ status |= I2C_IRQ_ACK_CLEAR;
+ zx2967_i2c_writel(i2c, status, REG_STAT);
+}
+
+static irqreturn_t zx2967_i2c_isr(int irq, void *dev_id)
+{
+ u32 status;
+ struct zx2967_i2c *i2c = (struct zx2967_i2c *)dev_id;
+
+ status = zx2967_i2c_readl(i2c, REG_STAT) & I2C_INT_MASK;
+ zx2967_i2c_isr_clr(i2c);
+
+ if (status & I2C_SR_EDEVICE)
+ i2c->error = -ENXIO;
+ else if (status & I2C_SR_EDATA)
+ i2c->error = -EIO;
+ else if (status & I2C_TRANS_DONE)
+ i2c->error = 0;
+ else
+ goto done;
+
+ complete(&i2c->complete);
+done:
+ return IRQ_HANDLED;
+}
+
+static void zx2967_set_addr(struct zx2967_i2c *i2c, u16 addr)
+{
+ u16 val;
+
+ val = (addr >> I2C_ADDR_LOW_SHIFT) & I2C_ADDR_LOW_MASK;
+ zx2967_i2c_writel(i2c, val, REG_DEVADDR_L);
+
+ val = (addr >> I2C_ADDR_HI_SHIFT) & I2C_ADDR_HI_MASK;
+ zx2967_i2c_writel(i2c, val, REG_DEVADDR_H);
+ if (val)
+ val = zx2967_i2c_readl(i2c, REG_CMD) | I2C_ADDR_MODE_TEN;
+ else
+ val = zx2967_i2c_readl(i2c, REG_CMD) & ~I2C_ADDR_MODE_TEN;
+ zx2967_i2c_writel(i2c, val, REG_CMD);
+}
+
+static int zx2967_i2c_xfer_bytes(struct zx2967_i2c *i2c, u32 bytes)
+{
+ unsigned long time_left;
+ int rd = i2c->msg_rd;
+ int ret;
+
+ reinit_completion(&i2c->complete);
+
+ if (rd) {
+ zx2967_i2c_writel(i2c, bytes - 1, REG_RDCONF);
+ } else {
+ ret = zx2967_i2c_fill_tx_fifo(i2c);
+ if (ret)
+ return ret;
+ }
+
+ zx2967_i2c_start_ctrl(i2c);
+
+ time_left = wait_for_completion_timeout(&i2c->complete,
+ I2C_TIMEOUT);
+ if (time_left == 0)
+ return -ETIMEDOUT;
+
+ if (i2c->error)
+ return i2c->error;
+
+ return rd ? zx2967_i2c_empty_rx_fifo(i2c, bytes) : 0;
+}
+
+static int zx2967_i2c_xfer_msg(struct zx2967_i2c *i2c,
+ struct i2c_msg *msg)
+{
+ int ret;
+ int i;
+
+ if (msg->len == 0)
+ return -EINVAL;
+
+ zx2967_i2c_flush_fifos(i2c);
+
+ i2c->cur_trans = msg->buf;
+ i2c->residue = msg->len;
+ i2c->access_cnt = msg->len / I2C_FIFO_MAX;
+ i2c->msg_rd = msg->flags & I2C_M_RD;
+
+ for (i = 0; i < i2c->access_cnt; i++) {
+ ret = zx2967_i2c_xfer_bytes(i2c, I2C_FIFO_MAX);
+ if (ret)
+ return ret;
+ }
+
+ if (i2c->residue > 0) {
+ ret = zx2967_i2c_xfer_bytes(i2c, i2c->residue);
+ if (ret)
+ return ret;
+ }
+
+ i2c->residue = 0;
+ i2c->access_cnt = 0;
+
+ return 0;
+}
+
+static int zx2967_i2c_xfer(struct i2c_adapter *adap,
+ struct i2c_msg *msgs, int num)
+{
+ struct zx2967_i2c *i2c = i2c_get_adapdata(adap);
+ int ret;
+ int i;
+
+ if (i2c->is_suspended)
+ return -EBUSY;
+
+ zx2967_set_addr(i2c, msgs->addr);
+
+ for (i = 0; i < num; i++) {
+ ret = zx2967_i2c_xfer_msg(i2c, &msgs[i]);
+ if (ret)
+ return ret;
+ }
+
+ return num;
+}
+
+static void
+zx2967_smbus_xfer_prepare(struct zx2967_i2c *i2c, u16 addr,
+ char read_write, u8 command, int size,
+ union i2c_smbus_data *data)
+{
+ u32 val;
+
+ val = zx2967_i2c_readl(i2c, REG_RDCONF);
+ val |= I2C_RFIFO_RESET;
+ zx2967_i2c_writel(i2c, val, REG_RDCONF);
+ zx2967_set_addr(i2c, addr);
+ val = zx2967_i2c_readl(i2c, REG_CMD);
+ val &= ~I2C_RW_READ;
+ zx2967_i2c_writel(i2c, val, REG_CMD);
+
+ switch (size) {
+ case I2C_SMBUS_BYTE:
+ zx2967_i2c_writel(i2c, command, REG_DATA);
+ break;
+ case I2C_SMBUS_BYTE_DATA:
+ zx2967_i2c_writel(i2c, command, REG_DATA);
+ if (read_write == I2C_SMBUS_WRITE)
+ zx2967_i2c_writel(i2c, data->byte, REG_DATA);
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ zx2967_i2c_writel(i2c, command, REG_DATA);
+ if (read_write == I2C_SMBUS_WRITE) {
+ zx2967_i2c_writel(i2c, (data->word >> 8), REG_DATA);
+ zx2967_i2c_writel(i2c, (data->word & 0xff),
+ REG_DATA);
+ }
+ break;
+ }
+}
+
+static int zx2967_smbus_xfer_read(struct zx2967_i2c *i2c, int size,
+ union i2c_smbus_data *data)
+{
+ unsigned long time_left;
+ u8 buf[2];
+ u32 val;
+
+ reinit_completion(&i2c->complete);
+
+ val = zx2967_i2c_readl(i2c, REG_CMD);
+ val |= I2C_CMB_RW_EN;
+ zx2967_i2c_writel(i2c, val, REG_CMD);
+
+ val = zx2967_i2c_readl(i2c, REG_CMD);
+ val |= I2C_START;
+ zx2967_i2c_writel(i2c, val, REG_CMD);
+
+ time_left = wait_for_completion_timeout(&i2c->complete,
+ I2C_TIMEOUT);
+ if (time_left == 0)
+ return -ETIMEDOUT;
+
+ if (i2c->error)
+ return i2c->error;
+
+ switch (size) {
+ case I2C_SMBUS_BYTE:
+ case I2C_SMBUS_BYTE_DATA:
+ val = zx2967_i2c_readl(i2c, REG_DATA);
+ data->byte = val;
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ case I2C_SMBUS_PROC_CALL:
+ buf[0] = zx2967_i2c_readl(i2c, REG_DATA);
+ buf[1] = zx2967_i2c_readl(i2c, REG_DATA);
+ data->word = (buf[0] << 8) | buf[1];
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ return 0;
+}
+
+static int zx2967_smbus_xfer_write(struct zx2967_i2c *i2c)
+{
+ unsigned long time_left;
+ u32 val;
+
+ reinit_completion(&i2c->complete);
+ val = zx2967_i2c_readl(i2c, REG_CMD);
+ val |= I2C_START;
+ zx2967_i2c_writel(i2c, val, REG_CMD);
+
+ time_left = wait_for_completion_timeout(&i2c->complete,
+ I2C_TIMEOUT);
+ if (time_left == 0)
+ return -ETIMEDOUT;
+
+ if (i2c->error)
+ return i2c->error;
+
+ return 0;
+}
+
+static int zx2967_smbus_xfer(struct i2c_adapter *adap, u16 addr,
+ unsigned short flags, char read_write,
+ u8 command, int size, union i2c_smbus_data *data)
+{
+ struct zx2967_i2c *i2c = i2c_get_adapdata(adap);
+
+ if (size == I2C_SMBUS_QUICK)
+ read_write = I2C_SMBUS_WRITE;
+
+ switch (size) {
+ case I2C_SMBUS_QUICK:
+ case I2C_SMBUS_BYTE:
+ case I2C_SMBUS_BYTE_DATA:
+ case I2C_SMBUS_WORD_DATA:
+ zx2967_smbus_xfer_prepare(i2c, addr, read_write,
+ command, size, data);
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ if (read_write == I2C_SMBUS_READ)
+ return zx2967_smbus_xfer_read(i2c, size, data);
+
+ return zx2967_smbus_xfer_write(i2c);
+}
+
+static u32 zx2967_i2c_func(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C |
+ I2C_FUNC_SMBUS_QUICK |
+ I2C_FUNC_SMBUS_BYTE |
+ I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_WORD_DATA |
+ I2C_FUNC_SMBUS_BLOCK_DATA |
+ I2C_FUNC_SMBUS_PROC_CALL |
+ I2C_FUNC_SMBUS_I2C_BLOCK;
+}
+
+static int __maybe_unused zx2967_i2c_suspend(struct device *dev)
+{
+ struct zx2967_i2c *i2c = dev_get_drvdata(dev);
+
+ i2c->is_suspended = true;
+ clk_disable_unprepare(i2c->clk);
+
+ return 0;
+}
+
+static int __maybe_unused zx2967_i2c_resume(struct device *dev)
+{
+ struct zx2967_i2c *i2c = dev_get_drvdata(dev);
+
+ i2c->is_suspended = false;
+ clk_prepare_enable(i2c->clk);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(zx2967_i2c_dev_pm_ops,
+ zx2967_i2c_suspend, zx2967_i2c_resume);
+
+static const struct i2c_algorithm zx2967_i2c_algo = {
+ .master_xfer = zx2967_i2c_xfer,
+ .smbus_xfer = zx2967_smbus_xfer,
+ .functionality = zx2967_i2c_func,
+};
+
+static const struct of_device_id zx2967_i2c_of_match[] = {
+ { .compatible = "zte,zx296718-i2c", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, zx2967_i2c_of_match);
+
+static int zx2967_i2c_probe(struct platform_device *pdev)
+{
+ struct zx2967_i2c *i2c;
+ void __iomem *reg_base;
+ struct resource *res;
+ struct clk *clk;
+ int ret;
+
+ i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
+ if (!i2c)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ reg_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(reg_base))
+ return PTR_ERR(reg_base);
+
+ clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "missing controller clock");
+ return PTR_ERR(clk);
+ }
+
+ ret = clk_prepare_enable(clk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable i2c_clk\n");
+ return ret;
+ }
+
+ ret = device_property_read_u32(&pdev->dev, "clock-frequency",
+ &i2c->clk_freq);
+ if (ret) {
+ dev_err(&pdev->dev, "missing clock-frequency");
+ return ret;
+ }
+
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0)
+ return ret;
+
+ i2c->irq = ret;
+ i2c->reg_base = reg_base;
+ i2c->clk = clk;
+
+ init_completion(&i2c->complete);
+ platform_set_drvdata(pdev, i2c);
+
+ ret = zx2967_i2c_reset_hardware(i2c);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to initialize i2c controller\n");
+ goto err_clk_unprepare;
+ }
+
+ ret = devm_request_irq(&pdev->dev, i2c->irq,
+ zx2967_i2c_isr, 0, dev_name(&pdev->dev), i2c);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request irq %i\n", i2c->irq);
+ goto err_clk_unprepare;
+ }
+
+ i2c_set_adapdata(&i2c->adap, i2c);
+ strlcpy(i2c->adap.name, "zx2967 i2c adapter",
+ sizeof(i2c->adap.name));
+ i2c->adap.algo = &zx2967_i2c_algo;
+ i2c->adap.nr = pdev->id;
+ i2c->adap.dev.parent = &pdev->dev;
+ i2c->adap.dev.of_node = pdev->dev.of_node;
+
+ ret = i2c_add_numbered_adapter(&i2c->adap);
+ if (ret)
+ goto err_clk_unprepare;
+
+ return 0;
+
+err_clk_unprepare:
+ clk_disable_unprepare(i2c->clk);
+ return ret;
+}
+
+static int zx2967_i2c_remove(struct platform_device *pdev)
+{
+ struct zx2967_i2c *i2c = platform_get_drvdata(pdev);
+
+ i2c_del_adapter(&i2c->adap);
+ clk_disable_unprepare(i2c->clk);
+
+ return 0;
+}
+
+static struct platform_driver zx2967_i2c_driver = {
+ .probe = zx2967_i2c_probe,
+ .remove = zx2967_i2c_remove,
+ .driver = {
+ .name = "zx2967_i2c",
+ .of_match_table = zx2967_i2c_of_match,
+ .pm = &zx2967_i2c_dev_pm_ops,
+ },
+};
+module_platform_driver(zx2967_i2c_driver);
+
+MODULE_AUTHOR("Baoyou Xie <baoyou.xie@linaro.org>");
+MODULE_DESCRIPTION("ZTE ZX2967 I2C Bus Controller driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/i2c/i2c-core-acpi.c b/drivers/i2c/i2c-core-acpi.c
new file mode 100644
index 0000000..4842ec3
--- /dev/null
+++ b/drivers/i2c/i2c-core-acpi.c
@@ -0,0 +1,665 @@
+/*
+ * Linux I2C core ACPI support code
+ *
+ * Copyright (C) 2014 Intel Corp, Author: Lan Tianyu <tianyu.lan@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include "i2c-core.h"
+
+struct i2c_acpi_handler_data {
+ struct acpi_connection_info info;
+ struct i2c_adapter *adapter;
+};
+
+struct gsb_buffer {
+ u8 status;
+ u8 len;
+ union {
+ u16 wdata;
+ u8 bdata;
+ u8 data[0];
+ };
+} __packed;
+
+struct i2c_acpi_lookup {
+ struct i2c_board_info *info;
+ acpi_handle adapter_handle;
+ acpi_handle device_handle;
+ acpi_handle search_handle;
+ int n;
+ int index;
+ u32 speed;
+ u32 min_speed;
+};
+
+static int i2c_acpi_fill_info(struct acpi_resource *ares, void *data)
+{
+ struct i2c_acpi_lookup *lookup = data;
+ struct i2c_board_info *info = lookup->info;
+ struct acpi_resource_i2c_serialbus *sb;
+ acpi_status status;
+
+ if (info->addr || ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS)
+ return 1;
+
+ sb = &ares->data.i2c_serial_bus;
+ if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C)
+ return 1;
+
+ if (lookup->index != -1 && lookup->n++ != lookup->index)
+ return 1;
+
+ status = acpi_get_handle(lookup->device_handle,
+ sb->resource_source.string_ptr,
+ &lookup->adapter_handle);
+ if (!ACPI_SUCCESS(status))
+ return 1;
+
+ info->addr = sb->slave_address;
+ lookup->speed = sb->connection_speed;
+ if (sb->access_mode == ACPI_I2C_10BIT_MODE)
+ info->flags |= I2C_CLIENT_TEN;
+
+ return 1;
+}
+
+static const struct acpi_device_id i2c_acpi_ignored_device_ids[] = {
+ /*
+ * ACPI video acpi_devices, which are handled by the acpi-video driver
+ * sometimes contain a SERIAL_TYPE_I2C ACPI resource, ignore these.
+ */
+ { ACPI_VIDEO_HID, 0 },
+ {}
+};
+
+static int i2c_acpi_do_lookup(struct acpi_device *adev,
+ struct i2c_acpi_lookup *lookup)
+{
+ struct i2c_board_info *info = lookup->info;
+ struct list_head resource_list;
+ int ret;
+
+ if (acpi_bus_get_status(adev) || !adev->status.present ||
+ acpi_device_enumerated(adev))
+ return -EINVAL;
+
+ if (acpi_match_device_ids(adev, i2c_acpi_ignored_device_ids) == 0)
+ return -ENODEV;
+
+ memset(info, 0, sizeof(*info));
+ lookup->device_handle = acpi_device_handle(adev);
+
+ /* Look up for I2cSerialBus resource */
+ INIT_LIST_HEAD(&resource_list);
+ ret = acpi_dev_get_resources(adev, &resource_list,
+ i2c_acpi_fill_info, lookup);
+ acpi_dev_free_resource_list(&resource_list);
+
+ if (ret < 0 || !info->addr)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int i2c_acpi_get_info(struct acpi_device *adev,
+ struct i2c_board_info *info,
+ struct i2c_adapter *adapter,
+ acpi_handle *adapter_handle)
+{
+ struct list_head resource_list;
+ struct resource_entry *entry;
+ struct i2c_acpi_lookup lookup;
+ int ret;
+
+ memset(&lookup, 0, sizeof(lookup));
+ lookup.info = info;
+ lookup.index = -1;
+
+ ret = i2c_acpi_do_lookup(adev, &lookup);
+ if (ret)
+ return ret;
+
+ if (adapter) {
+ /* The adapter must match the one in I2cSerialBus() connector */
+ if (ACPI_HANDLE(&adapter->dev) != lookup.adapter_handle)
+ return -ENODEV;
+ } else {
+ struct acpi_device *adapter_adev;
+
+ /* The adapter must be present */
+ if (acpi_bus_get_device(lookup.adapter_handle, &adapter_adev))
+ return -ENODEV;
+ if (acpi_bus_get_status(adapter_adev) ||
+ !adapter_adev->status.present)
+ return -ENODEV;
+ }
+
+ info->fwnode = acpi_fwnode_handle(adev);
+ if (adapter_handle)
+ *adapter_handle = lookup.adapter_handle;
+
+ /* Then fill IRQ number if any */
+ INIT_LIST_HEAD(&resource_list);
+ ret = acpi_dev_get_resources(adev, &resource_list, NULL, NULL);
+ if (ret < 0)
+ return -EINVAL;
+
+ resource_list_for_each_entry(entry, &resource_list) {
+ if (resource_type(entry->res) == IORESOURCE_IRQ) {
+ info->irq = entry->res->start;
+ break;
+ }
+ }
+
+ acpi_dev_free_resource_list(&resource_list);
+
+ acpi_set_modalias(adev, dev_name(&adev->dev), info->type,
+ sizeof(info->type));
+
+ return 0;
+}
+
+static void i2c_acpi_register_device(struct i2c_adapter *adapter,
+ struct acpi_device *adev,
+ struct i2c_board_info *info)
+{
+ adev->power.flags.ignore_parent = true;
+ acpi_device_set_enumerated(adev);
+
+ if (!i2c_new_device(adapter, info)) {
+ adev->power.flags.ignore_parent = false;
+ dev_err(&adapter->dev,
+ "failed to add I2C device %s from ACPI\n",
+ dev_name(&adev->dev));
+ }
+}
+
+static acpi_status i2c_acpi_add_device(acpi_handle handle, u32 level,
+ void *data, void **return_value)
+{
+ struct i2c_adapter *adapter = data;
+ struct acpi_device *adev;
+ struct i2c_board_info info;
+
+ if (acpi_bus_get_device(handle, &adev))
+ return AE_OK;
+
+ if (i2c_acpi_get_info(adev, &info, adapter, NULL))
+ return AE_OK;
+
+ i2c_acpi_register_device(adapter, adev, &info);
+
+ return AE_OK;
+}
+
+#define I2C_ACPI_MAX_SCAN_DEPTH 32
+
+/**
+ * i2c_acpi_register_devices - enumerate I2C slave devices behind adapter
+ * @adap: pointer to adapter
+ *
+ * Enumerate all I2C slave devices behind this adapter by walking the ACPI
+ * namespace. When a device is found it will be added to the Linux device
+ * model and bound to the corresponding ACPI handle.
+ */
+void i2c_acpi_register_devices(struct i2c_adapter *adap)
+{
+ acpi_status status;
+
+ if (!has_acpi_companion(&adap->dev))
+ return;
+
+ status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
+ I2C_ACPI_MAX_SCAN_DEPTH,
+ i2c_acpi_add_device, NULL,
+ adap, NULL);
+ if (ACPI_FAILURE(status))
+ dev_warn(&adap->dev, "failed to enumerate I2C slaves\n");
+}
+
+static acpi_status i2c_acpi_lookup_speed(acpi_handle handle, u32 level,
+ void *data, void **return_value)
+{
+ struct i2c_acpi_lookup *lookup = data;
+ struct acpi_device *adev;
+
+ if (acpi_bus_get_device(handle, &adev))
+ return AE_OK;
+
+ if (i2c_acpi_do_lookup(adev, lookup))
+ return AE_OK;
+
+ if (lookup->search_handle != lookup->adapter_handle)
+ return AE_OK;
+
+ if (lookup->speed <= lookup->min_speed)
+ lookup->min_speed = lookup->speed;
+
+ return AE_OK;
+}
+
+/**
+ * i2c_acpi_find_bus_speed - find I2C bus speed from ACPI
+ * @dev: The device owning the bus
+ *
+ * Find the I2C bus speed by walking the ACPI namespace for all I2C slaves
+ * devices connected to this bus and use the speed of slowest device.
+ *
+ * Returns the speed in Hz or zero
+ */
+u32 i2c_acpi_find_bus_speed(struct device *dev)
+{
+ struct i2c_acpi_lookup lookup;
+ struct i2c_board_info dummy;
+ acpi_status status;
+
+ if (!has_acpi_companion(dev))
+ return 0;
+
+ memset(&lookup, 0, sizeof(lookup));
+ lookup.search_handle = ACPI_HANDLE(dev);
+ lookup.min_speed = UINT_MAX;
+ lookup.info = &dummy;
+ lookup.index = -1;
+
+ status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
+ I2C_ACPI_MAX_SCAN_DEPTH,
+ i2c_acpi_lookup_speed, NULL,
+ &lookup, NULL);
+
+ if (ACPI_FAILURE(status)) {
+ dev_warn(dev, "unable to find I2C bus speed from ACPI\n");
+ return 0;
+ }
+
+ return lookup.min_speed != UINT_MAX ? lookup.min_speed : 0;
+}
+EXPORT_SYMBOL_GPL(i2c_acpi_find_bus_speed);
+
+static int i2c_acpi_match_adapter(struct device *dev, void *data)
+{
+ struct i2c_adapter *adapter = i2c_verify_adapter(dev);
+
+ if (!adapter)
+ return 0;
+
+ return ACPI_HANDLE(dev) == (acpi_handle)data;
+}
+
+static int i2c_acpi_match_device(struct device *dev, void *data)
+{
+ return ACPI_COMPANION(dev) == data;
+}
+
+static struct i2c_adapter *i2c_acpi_find_adapter_by_handle(acpi_handle handle)
+{
+ struct device *dev;
+
+ dev = bus_find_device(&i2c_bus_type, NULL, handle,
+ i2c_acpi_match_adapter);
+ return dev ? i2c_verify_adapter(dev) : NULL;
+}
+
+static struct i2c_client *i2c_acpi_find_client_by_adev(struct acpi_device *adev)
+{
+ struct device *dev;
+
+ dev = bus_find_device(&i2c_bus_type, NULL, adev, i2c_acpi_match_device);
+ return dev ? i2c_verify_client(dev) : NULL;
+}
+
+static int i2c_acpi_notify(struct notifier_block *nb, unsigned long value,
+ void *arg)
+{
+ struct acpi_device *adev = arg;
+ struct i2c_board_info info;
+ acpi_handle adapter_handle;
+ struct i2c_adapter *adapter;
+ struct i2c_client *client;
+
+ switch (value) {
+ case ACPI_RECONFIG_DEVICE_ADD:
+ if (i2c_acpi_get_info(adev, &info, NULL, &adapter_handle))
+ break;
+
+ adapter = i2c_acpi_find_adapter_by_handle(adapter_handle);
+ if (!adapter)
+ break;
+
+ i2c_acpi_register_device(adapter, adev, &info);
+ break;
+ case ACPI_RECONFIG_DEVICE_REMOVE:
+ if (!acpi_device_enumerated(adev))
+ break;
+
+ client = i2c_acpi_find_client_by_adev(adev);
+ if (!client)
+ break;
+
+ i2c_unregister_device(client);
+ put_device(&client->dev);
+ break;
+ }
+
+ return NOTIFY_OK;
+}
+
+struct notifier_block i2c_acpi_notifier = {
+ .notifier_call = i2c_acpi_notify,
+};
+
+/**
+ * i2c_acpi_new_device - Create i2c-client for the Nth I2cSerialBus resource
+ * @dev: Device owning the ACPI resources to get the client from
+ * @index: Index of ACPI resource to get
+ * @info: describes the I2C device; note this is modified (addr gets set)
+ * Context: can sleep
+ *
+ * By default the i2c subsys creates an i2c-client for the first I2cSerialBus
+ * resource of an acpi_device, but some acpi_devices have multiple I2cSerialBus
+ * resources, in that case this function can be used to create an i2c-client
+ * for other I2cSerialBus resources in the Current Resource Settings table.
+ *
+ * Also see i2c_new_device, which this function calls to create the i2c-client.
+ *
+ * Returns a pointer to the new i2c-client, or NULL if the adapter is not found.
+ */
+struct i2c_client *i2c_acpi_new_device(struct device *dev, int index,
+ struct i2c_board_info *info)
+{
+ struct i2c_acpi_lookup lookup;
+ struct i2c_adapter *adapter;
+ struct acpi_device *adev;
+ LIST_HEAD(resource_list);
+ int ret;
+
+ adev = ACPI_COMPANION(dev);
+ if (!adev)
+ return NULL;
+
+ memset(&lookup, 0, sizeof(lookup));
+ lookup.info = info;
+ lookup.device_handle = acpi_device_handle(adev);
+ lookup.index = index;
+
+ ret = acpi_dev_get_resources(adev, &resource_list,
+ i2c_acpi_fill_info, &lookup);
+ acpi_dev_free_resource_list(&resource_list);
+
+ if (ret < 0 || !info->addr)
+ return NULL;
+
+ adapter = i2c_acpi_find_adapter_by_handle(lookup.adapter_handle);
+ if (!adapter)
+ return NULL;
+
+ return i2c_new_device(adapter, info);
+}
+EXPORT_SYMBOL_GPL(i2c_acpi_new_device);
+
+#ifdef CONFIG_ACPI_I2C_OPREGION
+static int acpi_gsb_i2c_read_bytes(struct i2c_client *client,
+ u8 cmd, u8 *data, u8 data_len)
+{
+
+ struct i2c_msg msgs[2];
+ int ret;
+ u8 *buffer;
+
+ buffer = kzalloc(data_len, GFP_KERNEL);
+ if (!buffer)
+ return AE_NO_MEMORY;
+
+ msgs[0].addr = client->addr;
+ msgs[0].flags = client->flags;
+ msgs[0].len = 1;
+ msgs[0].buf = &cmd;
+
+ msgs[1].addr = client->addr;
+ msgs[1].flags = client->flags | I2C_M_RD;
+ msgs[1].len = data_len;
+ msgs[1].buf = buffer;
+
+ ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+ if (ret < 0)
+ dev_err(&client->adapter->dev, "i2c read failed\n");
+ else
+ memcpy(data, buffer, data_len);
+
+ kfree(buffer);
+ return ret;
+}
+
+static int acpi_gsb_i2c_write_bytes(struct i2c_client *client,
+ u8 cmd, u8 *data, u8 data_len)
+{
+
+ struct i2c_msg msgs[1];
+ u8 *buffer;
+ int ret = AE_OK;
+
+ buffer = kzalloc(data_len + 1, GFP_KERNEL);
+ if (!buffer)
+ return AE_NO_MEMORY;
+
+ buffer[0] = cmd;
+ memcpy(buffer + 1, data, data_len);
+
+ msgs[0].addr = client->addr;
+ msgs[0].flags = client->flags;
+ msgs[0].len = data_len + 1;
+ msgs[0].buf = buffer;
+
+ ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+ if (ret < 0)
+ dev_err(&client->adapter->dev, "i2c write failed\n");
+
+ kfree(buffer);
+ return ret;
+}
+
+static acpi_status
+i2c_acpi_space_handler(u32 function, acpi_physical_address command,
+ u32 bits, u64 *value64,
+ void *handler_context, void *region_context)
+{
+ struct gsb_buffer *gsb = (struct gsb_buffer *)value64;
+ struct i2c_acpi_handler_data *data = handler_context;
+ struct acpi_connection_info *info = &data->info;
+ struct acpi_resource_i2c_serialbus *sb;
+ struct i2c_adapter *adapter = data->adapter;
+ struct i2c_client *client;
+ struct acpi_resource *ares;
+ u32 accessor_type = function >> 16;
+ u8 action = function & ACPI_IO_MASK;
+ acpi_status ret;
+ int status;
+
+ ret = acpi_buffer_to_resource(info->connection, info->length, &ares);
+ if (ACPI_FAILURE(ret))
+ return ret;
+
+ client = kzalloc(sizeof(*client), GFP_KERNEL);
+ if (!client) {
+ ret = AE_NO_MEMORY;
+ goto err;
+ }
+
+ if (!value64 || ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS) {
+ ret = AE_BAD_PARAMETER;
+ goto err;
+ }
+
+ sb = &ares->data.i2c_serial_bus;
+ if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C) {
+ ret = AE_BAD_PARAMETER;
+ goto err;
+ }
+
+ client->adapter = adapter;
+ client->addr = sb->slave_address;
+
+ if (sb->access_mode == ACPI_I2C_10BIT_MODE)
+ client->flags |= I2C_CLIENT_TEN;
+
+ switch (accessor_type) {
+ case ACPI_GSB_ACCESS_ATTRIB_SEND_RCV:
+ if (action == ACPI_READ) {
+ status = i2c_smbus_read_byte(client);
+ if (status >= 0) {
+ gsb->bdata = status;
+ status = 0;
+ }
+ } else {
+ status = i2c_smbus_write_byte(client, gsb->bdata);
+ }
+ break;
+
+ case ACPI_GSB_ACCESS_ATTRIB_BYTE:
+ if (action == ACPI_READ) {
+ status = i2c_smbus_read_byte_data(client, command);
+ if (status >= 0) {
+ gsb->bdata = status;
+ status = 0;
+ }
+ } else {
+ status = i2c_smbus_write_byte_data(client, command,
+ gsb->bdata);
+ }
+ break;
+
+ case ACPI_GSB_ACCESS_ATTRIB_WORD:
+ if (action == ACPI_READ) {
+ status = i2c_smbus_read_word_data(client, command);
+ if (status >= 0) {
+ gsb->wdata = status;
+ status = 0;
+ }
+ } else {
+ status = i2c_smbus_write_word_data(client, command,
+ gsb->wdata);
+ }
+ break;
+
+ case ACPI_GSB_ACCESS_ATTRIB_BLOCK:
+ if (action == ACPI_READ) {
+ status = i2c_smbus_read_block_data(client, command,
+ gsb->data);
+ if (status >= 0) {
+ gsb->len = status;
+ status = 0;
+ }
+ } else {
+ status = i2c_smbus_write_block_data(client, command,
+ gsb->len, gsb->data);
+ }
+ break;
+
+ case ACPI_GSB_ACCESS_ATTRIB_MULTIBYTE:
+ if (action == ACPI_READ) {
+ status = acpi_gsb_i2c_read_bytes(client, command,
+ gsb->data, info->access_length);
+ if (status > 0)
+ status = 0;
+ } else {
+ status = acpi_gsb_i2c_write_bytes(client, command,
+ gsb->data, info->access_length);
+ }
+ break;
+
+ default:
+ dev_warn(&adapter->dev, "protocol 0x%02x not supported for client 0x%02x\n",
+ accessor_type, client->addr);
+ ret = AE_BAD_PARAMETER;
+ goto err;
+ }
+
+ gsb->status = status;
+
+ err:
+ kfree(client);
+ ACPI_FREE(ares);
+ return ret;
+}
+
+
+int i2c_acpi_install_space_handler(struct i2c_adapter *adapter)
+{
+ acpi_handle handle;
+ struct i2c_acpi_handler_data *data;
+ acpi_status status;
+
+ if (!adapter->dev.parent)
+ return -ENODEV;
+
+ handle = ACPI_HANDLE(adapter->dev.parent);
+
+ if (!handle)
+ return -ENODEV;
+
+ data = kzalloc(sizeof(struct i2c_acpi_handler_data),
+ GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->adapter = adapter;
+ status = acpi_bus_attach_private_data(handle, (void *)data);
+ if (ACPI_FAILURE(status)) {
+ kfree(data);
+ return -ENOMEM;
+ }
+
+ status = acpi_install_address_space_handler(handle,
+ ACPI_ADR_SPACE_GSBUS,
+ &i2c_acpi_space_handler,
+ NULL,
+ data);
+ if (ACPI_FAILURE(status)) {
+ dev_err(&adapter->dev, "Error installing i2c space handler\n");
+ acpi_bus_detach_private_data(handle);
+ kfree(data);
+ return -ENOMEM;
+ }
+
+ acpi_walk_dep_device_list(handle);
+ return 0;
+}
+
+void i2c_acpi_remove_space_handler(struct i2c_adapter *adapter)
+{
+ acpi_handle handle;
+ struct i2c_acpi_handler_data *data;
+ acpi_status status;
+
+ if (!adapter->dev.parent)
+ return;
+
+ handle = ACPI_HANDLE(adapter->dev.parent);
+
+ if (!handle)
+ return;
+
+ acpi_remove_address_space_handler(handle,
+ ACPI_ADR_SPACE_GSBUS,
+ &i2c_acpi_space_handler);
+
+ status = acpi_bus_get_private_data(handle, (void **)&data);
+ if (ACPI_SUCCESS(status))
+ kfree(data);
+
+ acpi_bus_detach_private_data(handle);
+}
+#endif /* CONFIG_ACPI_I2C_OPREGION */
diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
new file mode 100644
index 0000000..c89dac7
--- /dev/null
+++ b/drivers/i2c/i2c-core-base.c
@@ -0,0 +1,2245 @@
+/*
+ * Linux I2C core
+ *
+ * Copyright (C) 1995-99 Simon G. Vogl
+ * With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi>
+ * Mux support by Rodolfo Giometti <giometti@enneenne.com> and
+ * Michael Lawnick <michael.lawnick.ext@nsn.com>
+ *
+ * Copyright (C) 2013-2017 Wolfram Sang <wsa@the-dreams.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ * FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) "i2c-core: " fmt
+
+#include <dt-bindings/i2c/i2c.h>
+#include <linux/acpi.h>
+#include <linux/clk/clk-conf.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/idr.h>
+#include <linux/init.h>
+#include <linux/irqflags.h>
+#include <linux/jump_label.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
+#include <linux/pm_wakeirq.h>
+#include <linux/property.h>
+#include <linux/rwsem.h>
+#include <linux/slab.h>
+
+#include "i2c-core.h"
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/i2c.h>
+
+#define I2C_ADDR_OFFSET_TEN_BIT 0xa000
+#define I2C_ADDR_OFFSET_SLAVE 0x1000
+
+#define I2C_ADDR_7BITS_MAX 0x77
+#define I2C_ADDR_7BITS_COUNT (I2C_ADDR_7BITS_MAX + 1)
+
+/*
+ * core_lock protects i2c_adapter_idr, and guarantees that device detection,
+ * deletion of detected devices, and attach_adapter calls are serialized
+ */
+static DEFINE_MUTEX(core_lock);
+static DEFINE_IDR(i2c_adapter_idr);
+
+static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver);
+
+static struct static_key i2c_trace_msg = STATIC_KEY_INIT_FALSE;
+static bool is_registered;
+
+int i2c_transfer_trace_reg(void)
+{
+ static_key_slow_inc(&i2c_trace_msg);
+ return 0;
+}
+
+void i2c_transfer_trace_unreg(void)
+{
+ static_key_slow_dec(&i2c_trace_msg);
+}
+
+const struct i2c_device_id *i2c_match_id(const struct i2c_device_id *id,
+ const struct i2c_client *client)
+{
+ if (!(id && client))
+ return NULL;
+
+ while (id->name[0]) {
+ if (strcmp(client->name, id->name) == 0)
+ return id;
+ id++;
+ }
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(i2c_match_id);
+
+static int i2c_device_match(struct device *dev, struct device_driver *drv)
+{
+ struct i2c_client *client = i2c_verify_client(dev);
+ struct i2c_driver *driver;
+
+
+ /* Attempt an OF style match */
+ if (i2c_of_match_device(drv->of_match_table, client))
+ return 1;
+
+ /* Then ACPI style match */
+ if (acpi_driver_match_device(dev, drv))
+ return 1;
+
+ driver = to_i2c_driver(drv);
+
+ /* Finally an I2C match */
+ if (i2c_match_id(driver->id_table, client))
+ return 1;
+
+ return 0;
+}
+
+static int i2c_device_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ int rc;
+
+ rc = acpi_device_uevent_modalias(dev, env);
+ if (rc != -ENODEV)
+ return rc;
+
+ return add_uevent_var(env, "MODALIAS=%s%s", I2C_MODULE_PREFIX, client->name);
+}
+
+/* i2c bus recovery routines */
+static int get_scl_gpio_value(struct i2c_adapter *adap)
+{
+ return gpio_get_value(adap->bus_recovery_info->scl_gpio);
+}
+
+static void set_scl_gpio_value(struct i2c_adapter *adap, int val)
+{
+ gpio_set_value(adap->bus_recovery_info->scl_gpio, val);
+}
+
+static int get_sda_gpio_value(struct i2c_adapter *adap)
+{
+ return gpio_get_value(adap->bus_recovery_info->sda_gpio);
+}
+
+static int i2c_get_gpios_for_recovery(struct i2c_adapter *adap)
+{
+ struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
+ struct device *dev = &adap->dev;
+ int ret = 0;
+
+ ret = gpio_request_one(bri->scl_gpio, GPIOF_OPEN_DRAIN |
+ GPIOF_OUT_INIT_HIGH, "i2c-scl");
+ if (ret) {
+ dev_warn(dev, "Can't get SCL gpio: %d\n", bri->scl_gpio);
+ return ret;
+ }
+
+ if (bri->get_sda) {
+ if (gpio_request_one(bri->sda_gpio, GPIOF_IN, "i2c-sda")) {
+ /* work without SDA polling */
+ dev_warn(dev, "Can't get SDA gpio: %d. Not using SDA polling\n",
+ bri->sda_gpio);
+ bri->get_sda = NULL;
+ }
+ }
+
+ return ret;
+}
+
+static void i2c_put_gpios_for_recovery(struct i2c_adapter *adap)
+{
+ struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
+
+ if (bri->get_sda)
+ gpio_free(bri->sda_gpio);
+
+ gpio_free(bri->scl_gpio);
+}
+
+/*
+ * We are generating clock pulses. ndelay() determines durating of clk pulses.
+ * We will generate clock with rate 100 KHz and so duration of both clock levels
+ * is: delay in ns = (10^6 / 100) / 2
+ */
+#define RECOVERY_NDELAY 5000
+#define RECOVERY_CLK_CNT 9
+
+static int i2c_generic_recovery(struct i2c_adapter *adap)
+{
+ struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
+ int i = 0, val = 1, ret = 0;
+
+ if (bri->prepare_recovery)
+ bri->prepare_recovery(adap);
+
+ bri->set_scl(adap, val);
+ ndelay(RECOVERY_NDELAY);
+
+ /*
+ * By this time SCL is high, as we need to give 9 falling-rising edges
+ */
+ while (i++ < RECOVERY_CLK_CNT * 2) {
+ if (val) {
+ /* Break if SDA is high */
+ if (bri->get_sda && bri->get_sda(adap))
+ break;
+ /* SCL shouldn't be low here */
+ if (!bri->get_scl(adap)) {
+ dev_err(&adap->dev,
+ "SCL is stuck low, exit recovery\n");
+ ret = -EBUSY;
+ break;
+ }
+ }
+
+ val = !val;
+ bri->set_scl(adap, val);
+ ndelay(RECOVERY_NDELAY);
+ }
+
+ if (bri->unprepare_recovery)
+ bri->unprepare_recovery(adap);
+
+ return ret;
+}
+
+int i2c_generic_scl_recovery(struct i2c_adapter *adap)
+{
+ return i2c_generic_recovery(adap);
+}
+EXPORT_SYMBOL_GPL(i2c_generic_scl_recovery);
+
+int i2c_generic_gpio_recovery(struct i2c_adapter *adap)
+{
+ int ret;
+
+ ret = i2c_get_gpios_for_recovery(adap);
+ if (ret)
+ return ret;
+
+ ret = i2c_generic_recovery(adap);
+ i2c_put_gpios_for_recovery(adap);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(i2c_generic_gpio_recovery);
+
+int i2c_recover_bus(struct i2c_adapter *adap)
+{
+ if (!adap->bus_recovery_info)
+ return -EOPNOTSUPP;
+
+ dev_dbg(&adap->dev, "Trying i2c bus recovery\n");
+ return adap->bus_recovery_info->recover_bus(adap);
+}
+EXPORT_SYMBOL_GPL(i2c_recover_bus);
+
+static void i2c_init_recovery(struct i2c_adapter *adap)
+{
+ struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
+ char *err_str;
+
+ if (!bri)
+ return;
+
+ if (!bri->recover_bus) {
+ err_str = "no recover_bus() found";
+ goto err;
+ }
+
+ /* Generic GPIO recovery */
+ if (bri->recover_bus == i2c_generic_gpio_recovery) {
+ if (!gpio_is_valid(bri->scl_gpio)) {
+ err_str = "invalid SCL gpio";
+ goto err;
+ }
+
+ if (gpio_is_valid(bri->sda_gpio))
+ bri->get_sda = get_sda_gpio_value;
+ else
+ bri->get_sda = NULL;
+
+ bri->get_scl = get_scl_gpio_value;
+ bri->set_scl = set_scl_gpio_value;
+ } else if (bri->recover_bus == i2c_generic_scl_recovery) {
+ /* Generic SCL recovery */
+ if (!bri->set_scl || !bri->get_scl) {
+ err_str = "no {get|set}_scl() found";
+ goto err;
+ }
+ }
+
+ return;
+ err:
+ dev_err(&adap->dev, "Not using recovery: %s\n", err_str);
+ adap->bus_recovery_info = NULL;
+}
+
+static int i2c_smbus_host_notify_to_irq(const struct i2c_client *client)
+{
+ struct i2c_adapter *adap = client->adapter;
+ unsigned int irq;
+
+ if (!adap->host_notify_domain)
+ return -ENXIO;
+
+ if (client->flags & I2C_CLIENT_TEN)
+ return -EINVAL;
+
+ irq = irq_find_mapping(adap->host_notify_domain, client->addr);
+ if (!irq)
+ irq = irq_create_mapping(adap->host_notify_domain,
+ client->addr);
+
+ return irq > 0 ? irq : -ENXIO;
+}
+
+static int i2c_device_probe(struct device *dev)
+{
+ struct i2c_client *client = i2c_verify_client(dev);
+ struct i2c_driver *driver;
+ int status;
+
+ if (!client)
+ return 0;
+
+ driver = to_i2c_driver(dev->driver);
+
+ if (!client->irq && !driver->disable_i2c_core_irq_mapping) {
+ int irq = -ENOENT;
+
+ if (client->flags & I2C_CLIENT_HOST_NOTIFY) {
+ dev_dbg(dev, "Using Host Notify IRQ\n");
+ irq = i2c_smbus_host_notify_to_irq(client);
+ } else if (dev->of_node) {
+ irq = of_irq_get_byname(dev->of_node, "irq");
+ if (irq == -EINVAL || irq == -ENODATA)
+ irq = of_irq_get(dev->of_node, 0);
+ } else if (ACPI_COMPANION(dev)) {
+ irq = acpi_dev_gpio_irq_get(ACPI_COMPANION(dev), 0);
+ }
+ if (irq == -EPROBE_DEFER)
+ return irq;
+
+ if (irq < 0)
+ irq = 0;
+
+ client->irq = irq;
+ }
+
+ /*
+ * An I2C ID table is not mandatory, if and only if, a suitable Device
+ * Tree match table entry is supplied for the probing device.
+ */
+ if (!driver->id_table &&
+ !i2c_of_match_device(dev->driver->of_match_table, client))
+ return -ENODEV;
+
+ if (client->flags & I2C_CLIENT_WAKE) {
+ int wakeirq = -ENOENT;
+
+ if (dev->of_node) {
+ wakeirq = of_irq_get_byname(dev->of_node, "wakeup");
+ if (wakeirq == -EPROBE_DEFER)
+ return wakeirq;
+ }
+
+ device_init_wakeup(&client->dev, true);
+
+ if (wakeirq > 0 && wakeirq != client->irq)
+ status = dev_pm_set_dedicated_wake_irq(dev, wakeirq);
+ else if (client->irq > 0)
+ status = dev_pm_set_wake_irq(dev, client->irq);
+ else
+ status = 0;
+
+ if (status)
+ dev_warn(&client->dev, "failed to set up wakeup irq\n");
+ }
+
+ dev_dbg(dev, "probe\n");
+
+ status = of_clk_set_defaults(dev->of_node, false);
+ if (status < 0)
+ goto err_clear_wakeup_irq;
+
+ status = dev_pm_domain_attach(&client->dev, true);
+ if (status == -EPROBE_DEFER)
+ goto err_clear_wakeup_irq;
+
+ /*
+ * When there are no more users of probe(),
+ * rename probe_new to probe.
+ */
+ if (driver->probe_new)
+ status = driver->probe_new(client);
+ else if (driver->probe)
+ status = driver->probe(client,
+ i2c_match_id(driver->id_table, client));
+ else
+ status = -EINVAL;
+
+ if (status)
+ goto err_detach_pm_domain;
+
+ return 0;
+
+err_detach_pm_domain:
+ dev_pm_domain_detach(&client->dev, true);
+err_clear_wakeup_irq:
+ dev_pm_clear_wake_irq(&client->dev);
+ device_init_wakeup(&client->dev, false);
+ return status;
+}
+
+static int i2c_device_remove(struct device *dev)
+{
+ struct i2c_client *client = i2c_verify_client(dev);
+ struct i2c_driver *driver;
+ int status = 0;
+
+ if (!client || !dev->driver)
+ return 0;
+
+ driver = to_i2c_driver(dev->driver);
+ if (driver->remove) {
+ dev_dbg(dev, "remove\n");
+ status = driver->remove(client);
+ }
+
+ dev_pm_domain_detach(&client->dev, true);
+
+ dev_pm_clear_wake_irq(&client->dev);
+ device_init_wakeup(&client->dev, false);
+
+ return status;
+}
+
+static void i2c_device_shutdown(struct device *dev)
+{
+ struct i2c_client *client = i2c_verify_client(dev);
+ struct i2c_driver *driver;
+
+ if (!client || !dev->driver)
+ return;
+ driver = to_i2c_driver(dev->driver);
+ if (driver->shutdown)
+ driver->shutdown(client);
+}
+
+static void i2c_client_dev_release(struct device *dev)
+{
+ kfree(to_i2c_client(dev));
+}
+
+static ssize_t
+show_name(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%s\n", dev->type == &i2c_client_type ?
+ to_i2c_client(dev)->name : to_i2c_adapter(dev)->name);
+}
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+
+static ssize_t
+show_modalias(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ int len;
+
+ len = acpi_device_modalias(dev, buf, PAGE_SIZE -1);
+ if (len != -ENODEV)
+ return len;
+
+ return sprintf(buf, "%s%s\n", I2C_MODULE_PREFIX, client->name);
+}
+static DEVICE_ATTR(modalias, S_IRUGO, show_modalias, NULL);
+
+static struct attribute *i2c_dev_attrs[] = {
+ &dev_attr_name.attr,
+ /* modalias helps coldplug: modprobe $(cat .../modalias) */
+ &dev_attr_modalias.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(i2c_dev);
+
+struct bus_type i2c_bus_type = {
+ .name = "i2c",
+ .match = i2c_device_match,
+ .probe = i2c_device_probe,
+ .remove = i2c_device_remove,
+ .shutdown = i2c_device_shutdown,
+};
+EXPORT_SYMBOL_GPL(i2c_bus_type);
+
+struct device_type i2c_client_type = {
+ .groups = i2c_dev_groups,
+ .uevent = i2c_device_uevent,
+ .release = i2c_client_dev_release,
+};
+EXPORT_SYMBOL_GPL(i2c_client_type);
+
+
+/**
+ * i2c_verify_client - return parameter as i2c_client, or NULL
+ * @dev: device, probably from some driver model iterator
+ *
+ * When traversing the driver model tree, perhaps using driver model
+ * iterators like @device_for_each_child(), you can't assume very much
+ * about the nodes you find. Use this function to avoid oopses caused
+ * by wrongly treating some non-I2C device as an i2c_client.
+ */
+struct i2c_client *i2c_verify_client(struct device *dev)
+{
+ return (dev->type == &i2c_client_type)
+ ? to_i2c_client(dev)
+ : NULL;
+}
+EXPORT_SYMBOL(i2c_verify_client);
+
+
+/* Return a unique address which takes the flags of the client into account */
+static unsigned short i2c_encode_flags_to_addr(struct i2c_client *client)
+{
+ unsigned short addr = client->addr;
+
+ /* For some client flags, add an arbitrary offset to avoid collisions */
+ if (client->flags & I2C_CLIENT_TEN)
+ addr |= I2C_ADDR_OFFSET_TEN_BIT;
+
+ if (client->flags & I2C_CLIENT_SLAVE)
+ addr |= I2C_ADDR_OFFSET_SLAVE;
+
+ return addr;
+}
+
+/* This is a permissive address validity check, I2C address map constraints
+ * are purposely not enforced, except for the general call address. */
+int i2c_check_addr_validity(unsigned addr, unsigned short flags)
+{
+ if (flags & I2C_CLIENT_TEN) {
+ /* 10-bit address, all values are valid */
+ if (addr > 0x3ff)
+ return -EINVAL;
+ } else {
+ /* 7-bit address, reject the general call address */
+ if (addr == 0x00 || addr > 0x7f)
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/* And this is a strict address validity check, used when probing. If a
+ * device uses a reserved address, then it shouldn't be probed. 7-bit
+ * addressing is assumed, 10-bit address devices are rare and should be
+ * explicitly enumerated. */
+int i2c_check_7bit_addr_validity_strict(unsigned short addr)
+{
+ /*
+ * Reserved addresses per I2C specification:
+ * 0x00 General call address / START byte
+ * 0x01 CBUS address
+ * 0x02 Reserved for different bus format
+ * 0x03 Reserved for future purposes
+ * 0x04-0x07 Hs-mode master code
+ * 0x78-0x7b 10-bit slave addressing
+ * 0x7c-0x7f Reserved for future purposes
+ */
+ if (addr < 0x08 || addr > 0x77)
+ return -EINVAL;
+ return 0;
+}
+
+static int __i2c_check_addr_busy(struct device *dev, void *addrp)
+{
+ struct i2c_client *client = i2c_verify_client(dev);
+ int addr = *(int *)addrp;
+
+ if (client && i2c_encode_flags_to_addr(client) == addr)
+ return -EBUSY;
+ return 0;
+}
+
+/* walk up mux tree */
+static int i2c_check_mux_parents(struct i2c_adapter *adapter, int addr)
+{
+ struct i2c_adapter *parent = i2c_parent_is_i2c_adapter(adapter);
+ int result;
+
+ result = device_for_each_child(&adapter->dev, &addr,
+ __i2c_check_addr_busy);
+
+ if (!result && parent)
+ result = i2c_check_mux_parents(parent, addr);
+
+ return result;
+}
+
+/* recurse down mux tree */
+static int i2c_check_mux_children(struct device *dev, void *addrp)
+{
+ int result;
+
+ if (dev->type == &i2c_adapter_type)
+ result = device_for_each_child(dev, addrp,
+ i2c_check_mux_children);
+ else
+ result = __i2c_check_addr_busy(dev, addrp);
+
+ return result;
+}
+
+static int i2c_check_addr_busy(struct i2c_adapter *adapter, int addr)
+{
+ struct i2c_adapter *parent = i2c_parent_is_i2c_adapter(adapter);
+ int result = 0;
+
+ if (parent)
+ result = i2c_check_mux_parents(parent, addr);
+
+ if (!result)
+ result = device_for_each_child(&adapter->dev, &addr,
+ i2c_check_mux_children);
+
+ return result;
+}
+
+/**
+ * i2c_adapter_lock_bus - Get exclusive access to an I2C bus segment
+ * @adapter: Target I2C bus segment
+ * @flags: I2C_LOCK_ROOT_ADAPTER locks the root i2c adapter, I2C_LOCK_SEGMENT
+ * locks only this branch in the adapter tree
+ */
+static void i2c_adapter_lock_bus(struct i2c_adapter *adapter,
+ unsigned int flags)
+{
+ rt_mutex_lock(&adapter->bus_lock);
+}
+
+/**
+ * i2c_adapter_trylock_bus - Try to get exclusive access to an I2C bus segment
+ * @adapter: Target I2C bus segment
+ * @flags: I2C_LOCK_ROOT_ADAPTER trylocks the root i2c adapter, I2C_LOCK_SEGMENT
+ * trylocks only this branch in the adapter tree
+ */
+static int i2c_adapter_trylock_bus(struct i2c_adapter *adapter,
+ unsigned int flags)
+{
+ return rt_mutex_trylock(&adapter->bus_lock);
+}
+
+/**
+ * i2c_adapter_unlock_bus - Release exclusive access to an I2C bus segment
+ * @adapter: Target I2C bus segment
+ * @flags: I2C_LOCK_ROOT_ADAPTER unlocks the root i2c adapter, I2C_LOCK_SEGMENT
+ * unlocks only this branch in the adapter tree
+ */
+static void i2c_adapter_unlock_bus(struct i2c_adapter *adapter,
+ unsigned int flags)
+{
+ rt_mutex_unlock(&adapter->bus_lock);
+}
+
+static void i2c_dev_set_name(struct i2c_adapter *adap,
+ struct i2c_client *client)
+{
+ struct acpi_device *adev = ACPI_COMPANION(&client->dev);
+
+ if (adev) {
+ dev_set_name(&client->dev, "i2c-%s", acpi_dev_name(adev));
+ return;
+ }
+
+ dev_set_name(&client->dev, "%d-%04x", i2c_adapter_id(adap),
+ i2c_encode_flags_to_addr(client));
+}
+
+static int i2c_dev_irq_from_resources(const struct resource *resources,
+ unsigned int num_resources)
+{
+ struct irq_data *irqd;
+ int i;
+
+ for (i = 0; i < num_resources; i++) {
+ const struct resource *r = &resources[i];
+
+ if (resource_type(r) != IORESOURCE_IRQ)
+ continue;
+
+ if (r->flags & IORESOURCE_BITS) {
+ irqd = irq_get_irq_data(r->start);
+ if (!irqd)
+ break;
+
+ irqd_set_trigger_type(irqd, r->flags & IORESOURCE_BITS);
+ }
+
+ return r->start;
+ }
+
+ return 0;
+}
+
+/**
+ * i2c_new_device - instantiate an i2c device
+ * @adap: the adapter managing the device
+ * @info: describes one I2C device; bus_num is ignored
+ * Context: can sleep
+ *
+ * Create an i2c device. Binding is handled through driver model
+ * probe()/remove() methods. A driver may be bound to this device when we
+ * return from this function, or any later moment (e.g. maybe hotplugging will
+ * load the driver module). This call is not appropriate for use by mainboard
+ * initialization logic, which usually runs during an arch_initcall() long
+ * before any i2c_adapter could exist.
+ *
+ * This returns the new i2c client, which may be saved for later use with
+ * i2c_unregister_device(); or NULL to indicate an error.
+ */
+struct i2c_client *
+i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
+{
+ struct i2c_client *client;
+ int status;
+
+ client = kzalloc(sizeof *client, GFP_KERNEL);
+ if (!client)
+ return NULL;
+
+ client->adapter = adap;
+
+ client->dev.platform_data = info->platform_data;
+
+ if (info->archdata)
+ client->dev.archdata = *info->archdata;
+
+ client->flags = info->flags;
+ client->addr = info->addr;
+
+ client->irq = info->irq;
+ if (!client->irq)
+ client->irq = i2c_dev_irq_from_resources(info->resources,
+ info->num_resources);
+
+ strlcpy(client->name, info->type, sizeof(client->name));
+
+ status = i2c_check_addr_validity(client->addr, client->flags);
+ if (status) {
+ dev_err(&adap->dev, "Invalid %d-bit I2C address 0x%02hx\n",
+ client->flags & I2C_CLIENT_TEN ? 10 : 7, client->addr);
+ goto out_err_silent;
+ }
+
+ /* Check for address business */
+ status = i2c_check_addr_busy(adap, i2c_encode_flags_to_addr(client));
+ if (status)
+ goto out_err;
+
+ client->dev.parent = &client->adapter->dev;
+ client->dev.bus = &i2c_bus_type;
+ client->dev.type = &i2c_client_type;
+ client->dev.of_node = info->of_node;
+ client->dev.fwnode = info->fwnode;
+
+ i2c_dev_set_name(adap, client);
+
+ if (info->properties) {
+ status = device_add_properties(&client->dev, info->properties);
+ if (status) {
+ dev_err(&adap->dev,
+ "Failed to add properties to client %s: %d\n",
+ client->name, status);
+ goto out_err;
+ }
+ }
+
+ status = device_register(&client->dev);
+ if (status)
+ goto out_free_props;
+
+ dev_dbg(&adap->dev, "client [%s] registered with bus id %s\n",
+ client->name, dev_name(&client->dev));
+
+ return client;
+
+out_free_props:
+ if (info->properties)
+ device_remove_properties(&client->dev);
+out_err:
+ dev_err(&adap->dev,
+ "Failed to register i2c client %s at 0x%02x (%d)\n",
+ client->name, client->addr, status);
+out_err_silent:
+ kfree(client);
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(i2c_new_device);
+
+
+/**
+ * i2c_unregister_device - reverse effect of i2c_new_device()
+ * @client: value returned from i2c_new_device()
+ * Context: can sleep
+ */
+void i2c_unregister_device(struct i2c_client *client)
+{
+ if (client->dev.of_node)
+ of_node_clear_flag(client->dev.of_node, OF_POPULATED);
+ if (ACPI_COMPANION(&client->dev))
+ acpi_device_clear_enumerated(ACPI_COMPANION(&client->dev));
+ device_unregister(&client->dev);
+}
+EXPORT_SYMBOL_GPL(i2c_unregister_device);
+
+
+static const struct i2c_device_id dummy_id[] = {
+ { "dummy", 0 },
+ { },
+};
+
+static int dummy_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ return 0;
+}
+
+static int dummy_remove(struct i2c_client *client)
+{
+ return 0;
+}
+
+static struct i2c_driver dummy_driver = {
+ .driver.name = "dummy",
+ .probe = dummy_probe,
+ .remove = dummy_remove,
+ .id_table = dummy_id,
+};
+
+/**
+ * i2c_new_dummy - return a new i2c device bound to a dummy driver
+ * @adapter: the adapter managing the device
+ * @address: seven bit address to be used
+ * Context: can sleep
+ *
+ * This returns an I2C client bound to the "dummy" driver, intended for use
+ * with devices that consume multiple addresses. Examples of such chips
+ * include various EEPROMS (like 24c04 and 24c08 models).
+ *
+ * These dummy devices have two main uses. First, most I2C and SMBus calls
+ * except i2c_transfer() need a client handle; the dummy will be that handle.
+ * And second, this prevents the specified address from being bound to a
+ * different driver.
+ *
+ * This returns the new i2c client, which should be saved for later use with
+ * i2c_unregister_device(); or NULL to indicate an error.
+ */
+struct i2c_client *i2c_new_dummy(struct i2c_adapter *adapter, u16 address)
+{
+ struct i2c_board_info info = {
+ I2C_BOARD_INFO("dummy", address),
+ };
+
+ return i2c_new_device(adapter, &info);
+}
+EXPORT_SYMBOL_GPL(i2c_new_dummy);
+
+/**
+ * i2c_new_secondary_device - Helper to get the instantiated secondary address
+ * and create the associated device
+ * @client: Handle to the primary client
+ * @name: Handle to specify which secondary address to get
+ * @default_addr: Used as a fallback if no secondary address was specified
+ * Context: can sleep
+ *
+ * I2C clients can be composed of multiple I2C slaves bound together in a single
+ * component. The I2C client driver then binds to the master I2C slave and needs
+ * to create I2C dummy clients to communicate with all the other slaves.
+ *
+ * This function creates and returns an I2C dummy client whose I2C address is
+ * retrieved from the platform firmware based on the given slave name. If no
+ * address is specified by the firmware default_addr is used.
+ *
+ * On DT-based platforms the address is retrieved from the "reg" property entry
+ * cell whose "reg-names" value matches the slave name.
+ *
+ * This returns the new i2c client, which should be saved for later use with
+ * i2c_unregister_device(); or NULL to indicate an error.
+ */
+struct i2c_client *i2c_new_secondary_device(struct i2c_client *client,
+ const char *name,
+ u16 default_addr)
+{
+ struct device_node *np = client->dev.of_node;
+ u32 addr = default_addr;
+ int i;
+
+ if (np) {
+ i = of_property_match_string(np, "reg-names", name);
+ if (i >= 0)
+ of_property_read_u32_index(np, "reg", i, &addr);
+ }
+
+ dev_dbg(&client->adapter->dev, "Address for %s : 0x%x\n", name, addr);
+ return i2c_new_dummy(client->adapter, addr);
+}
+EXPORT_SYMBOL_GPL(i2c_new_secondary_device);
+
+/* ------------------------------------------------------------------------- */
+
+/* I2C bus adapters -- one roots each I2C or SMBUS segment */
+
+static void i2c_adapter_dev_release(struct device *dev)
+{
+ struct i2c_adapter *adap = to_i2c_adapter(dev);
+ complete(&adap->dev_released);
+}
+
+unsigned int i2c_adapter_depth(struct i2c_adapter *adapter)
+{
+ unsigned int depth = 0;
+
+ while ((adapter = i2c_parent_is_i2c_adapter(adapter)))
+ depth++;
+
+ WARN_ONCE(depth >= MAX_LOCKDEP_SUBCLASSES,
+ "adapter depth exceeds lockdep subclass limit\n");
+
+ return depth;
+}
+EXPORT_SYMBOL_GPL(i2c_adapter_depth);
+
+/*
+ * Let users instantiate I2C devices through sysfs. This can be used when
+ * platform initialization code doesn't contain the proper data for
+ * whatever reason. Also useful for drivers that do device detection and
+ * detection fails, either because the device uses an unexpected address,
+ * or this is a compatible device with different ID register values.
+ *
+ * Parameter checking may look overzealous, but we really don't want
+ * the user to provide incorrect parameters.
+ */
+static ssize_t
+i2c_sysfs_new_device(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_adapter *adap = to_i2c_adapter(dev);
+ struct i2c_board_info info;
+ struct i2c_client *client;
+ char *blank, end;
+ int res;
+
+ memset(&info, 0, sizeof(struct i2c_board_info));
+
+ blank = strchr(buf, ' ');
+ if (!blank) {
+ dev_err(dev, "%s: Missing parameters\n", "new_device");
+ return -EINVAL;
+ }
+ if (blank - buf > I2C_NAME_SIZE - 1) {
+ dev_err(dev, "%s: Invalid device name\n", "new_device");
+ return -EINVAL;
+ }
+ memcpy(info.type, buf, blank - buf);
+
+ /* Parse remaining parameters, reject extra parameters */
+ res = sscanf(++blank, "%hi%c", &info.addr, &end);
+ if (res < 1) {
+ dev_err(dev, "%s: Can't parse I2C address\n", "new_device");
+ return -EINVAL;
+ }
+ if (res > 1 && end != '\n') {
+ dev_err(dev, "%s: Extra parameters\n", "new_device");
+ return -EINVAL;
+ }
+
+ if ((info.addr & I2C_ADDR_OFFSET_TEN_BIT) == I2C_ADDR_OFFSET_TEN_BIT) {
+ info.addr &= ~I2C_ADDR_OFFSET_TEN_BIT;
+ info.flags |= I2C_CLIENT_TEN;
+ }
+
+ if (info.addr & I2C_ADDR_OFFSET_SLAVE) {
+ info.addr &= ~I2C_ADDR_OFFSET_SLAVE;
+ info.flags |= I2C_CLIENT_SLAVE;
+ }
+
+ client = i2c_new_device(adap, &info);
+ if (!client)
+ return -EINVAL;
+
+ /* Keep track of the added device */
+ mutex_lock(&adap->userspace_clients_lock);
+ list_add_tail(&client->detected, &adap->userspace_clients);
+ mutex_unlock(&adap->userspace_clients_lock);
+ dev_info(dev, "%s: Instantiated device %s at 0x%02hx\n", "new_device",
+ info.type, info.addr);
+
+ return count;
+}
+static DEVICE_ATTR(new_device, S_IWUSR, NULL, i2c_sysfs_new_device);
+
+/*
+ * And of course let the users delete the devices they instantiated, if
+ * they got it wrong. This interface can only be used to delete devices
+ * instantiated by i2c_sysfs_new_device above. This guarantees that we
+ * don't delete devices to which some kernel code still has references.
+ *
+ * Parameter checking may look overzealous, but we really don't want
+ * the user to delete the wrong device.
+ */
+static ssize_t
+i2c_sysfs_delete_device(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_adapter *adap = to_i2c_adapter(dev);
+ struct i2c_client *client, *next;
+ unsigned short addr;
+ char end;
+ int res;
+
+ /* Parse parameters, reject extra parameters */
+ res = sscanf(buf, "%hi%c", &addr, &end);
+ if (res < 1) {
+ dev_err(dev, "%s: Can't parse I2C address\n", "delete_device");
+ return -EINVAL;
+ }
+ if (res > 1 && end != '\n') {
+ dev_err(dev, "%s: Extra parameters\n", "delete_device");
+ return -EINVAL;
+ }
+
+ /* Make sure the device was added through sysfs */
+ res = -ENOENT;
+ mutex_lock_nested(&adap->userspace_clients_lock,
+ i2c_adapter_depth(adap));
+ list_for_each_entry_safe(client, next, &adap->userspace_clients,
+ detected) {
+ if (i2c_encode_flags_to_addr(client) == addr) {
+ dev_info(dev, "%s: Deleting device %s at 0x%02hx\n",
+ "delete_device", client->name, client->addr);
+
+ list_del(&client->detected);
+ i2c_unregister_device(client);
+ res = count;
+ break;
+ }
+ }
+ mutex_unlock(&adap->userspace_clients_lock);
+
+ if (res < 0)
+ dev_err(dev, "%s: Can't find device in list\n",
+ "delete_device");
+ return res;
+}
+static DEVICE_ATTR_IGNORE_LOCKDEP(delete_device, S_IWUSR, NULL,
+ i2c_sysfs_delete_device);
+
+static struct attribute *i2c_adapter_attrs[] = {
+ &dev_attr_name.attr,
+ &dev_attr_new_device.attr,
+ &dev_attr_delete_device.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(i2c_adapter);
+
+struct device_type i2c_adapter_type = {
+ .groups = i2c_adapter_groups,
+ .release = i2c_adapter_dev_release,
+};
+EXPORT_SYMBOL_GPL(i2c_adapter_type);
+
+/**
+ * i2c_verify_adapter - return parameter as i2c_adapter or NULL
+ * @dev: device, probably from some driver model iterator
+ *
+ * When traversing the driver model tree, perhaps using driver model
+ * iterators like @device_for_each_child(), you can't assume very much
+ * about the nodes you find. Use this function to avoid oopses caused
+ * by wrongly treating some non-I2C device as an i2c_adapter.
+ */
+struct i2c_adapter *i2c_verify_adapter(struct device *dev)
+{
+ return (dev->type == &i2c_adapter_type)
+ ? to_i2c_adapter(dev)
+ : NULL;
+}
+EXPORT_SYMBOL(i2c_verify_adapter);
+
+#ifdef CONFIG_I2C_COMPAT
+static struct class_compat *i2c_adapter_compat_class;
+#endif
+
+static void i2c_scan_static_board_info(struct i2c_adapter *adapter)
+{
+ struct i2c_devinfo *devinfo;
+
+ down_read(&__i2c_board_lock);
+ list_for_each_entry(devinfo, &__i2c_board_list, list) {
+ if (devinfo->busnum == adapter->nr
+ && !i2c_new_device(adapter,
+ &devinfo->board_info))
+ dev_err(&adapter->dev,
+ "Can't create device at 0x%02x\n",
+ devinfo->board_info.addr);
+ }
+ up_read(&__i2c_board_lock);
+}
+
+static int i2c_do_add_adapter(struct i2c_driver *driver,
+ struct i2c_adapter *adap)
+{
+ /* Detect supported devices on that bus, and instantiate them */
+ i2c_detect(adap, driver);
+
+ /* Let legacy drivers scan this bus for matching devices */
+ if (driver->attach_adapter) {
+ dev_warn(&adap->dev, "%s: attach_adapter method is deprecated\n",
+ driver->driver.name);
+ dev_warn(&adap->dev,
+ "Please use another way to instantiate your i2c_client\n");
+ /* We ignore the return code; if it fails, too bad */
+ driver->attach_adapter(adap);
+ }
+ return 0;
+}
+
+static int __process_new_adapter(struct device_driver *d, void *data)
+{
+ return i2c_do_add_adapter(to_i2c_driver(d), data);
+}
+
+static const struct i2c_lock_operations i2c_adapter_lock_ops = {
+ .lock_bus = i2c_adapter_lock_bus,
+ .trylock_bus = i2c_adapter_trylock_bus,
+ .unlock_bus = i2c_adapter_unlock_bus,
+};
+
+static void i2c_host_notify_irq_teardown(struct i2c_adapter *adap)
+{
+ struct irq_domain *domain = adap->host_notify_domain;
+ irq_hw_number_t hwirq;
+
+ if (!domain)
+ return;
+
+ for (hwirq = 0 ; hwirq < I2C_ADDR_7BITS_COUNT ; hwirq++)
+ irq_dispose_mapping(irq_find_mapping(domain, hwirq));
+
+ irq_domain_remove(domain);
+ adap->host_notify_domain = NULL;
+}
+
+static int i2c_host_notify_irq_map(struct irq_domain *h,
+ unsigned int virq,
+ irq_hw_number_t hw_irq_num)
+{
+ irq_set_chip_and_handler(virq, &dummy_irq_chip, handle_simple_irq);
+
+ return 0;
+}
+
+static const struct irq_domain_ops i2c_host_notify_irq_ops = {
+ .map = i2c_host_notify_irq_map,
+};
+
+static int i2c_setup_host_notify_irq_domain(struct i2c_adapter *adap)
+{
+ struct irq_domain *domain;
+
+ if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_HOST_NOTIFY))
+ return 0;
+
+ domain = irq_domain_create_linear(adap->dev.fwnode,
+ I2C_ADDR_7BITS_COUNT,
+ &i2c_host_notify_irq_ops, adap);
+ if (!domain)
+ return -ENOMEM;
+
+ adap->host_notify_domain = domain;
+
+ return 0;
+}
+
+/**
+ * i2c_handle_smbus_host_notify - Forward a Host Notify event to the correct
+ * I2C client.
+ * @adap: the adapter
+ * @addr: the I2C address of the notifying device
+ * Context: can't sleep
+ *
+ * Helper function to be called from an I2C bus driver's interrupt
+ * handler. It will schedule the Host Notify IRQ.
+ */
+int i2c_handle_smbus_host_notify(struct i2c_adapter *adap, unsigned short addr)
+{
+ int irq;
+
+ if (!adap)
+ return -EINVAL;
+
+ irq = irq_find_mapping(adap->host_notify_domain, addr);
+ if (irq <= 0)
+ return -ENXIO;
+
+ generic_handle_irq(irq);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(i2c_handle_smbus_host_notify);
+
+static int i2c_register_adapter(struct i2c_adapter *adap)
+{
+ int res = -EINVAL;
+
+ /* Can't register until after driver model init */
+ if (WARN_ON(!is_registered)) {
+ res = -EAGAIN;
+ goto out_list;
+ }
+
+ /* Sanity checks */
+ if (WARN(!adap->name[0], "i2c adapter has no name"))
+ goto out_list;
+
+ if (!adap->algo) {
+ pr_err("adapter '%s': no algo supplied!\n", adap->name);
+ goto out_list;
+ }
+
+ if (!adap->lock_ops)
+ adap->lock_ops = &i2c_adapter_lock_ops;
+
+ rt_mutex_init(&adap->bus_lock);
+ rt_mutex_init(&adap->mux_lock);
+ mutex_init(&adap->userspace_clients_lock);
+ INIT_LIST_HEAD(&adap->userspace_clients);
+
+ /* Set default timeout to 1 second if not already set */
+ if (adap->timeout == 0)
+ adap->timeout = HZ;
+
+ /* register soft irqs for Host Notify */
+ res = i2c_setup_host_notify_irq_domain(adap);
+ if (res) {
+ pr_err("adapter '%s': can't create Host Notify IRQs (%d)\n",
+ adap->name, res);
+ goto out_list;
+ }
+
+ dev_set_name(&adap->dev, "i2c-%d", adap->nr);
+ adap->dev.bus = &i2c_bus_type;
+ adap->dev.type = &i2c_adapter_type;
+ res = device_register(&adap->dev);
+ if (res) {
+ pr_err("adapter '%s': can't register device (%d)\n", adap->name, res);
+ goto out_list;
+ }
+
+ dev_dbg(&adap->dev, "adapter [%s] registered\n", adap->name);
+
+ pm_runtime_no_callbacks(&adap->dev);
+ pm_suspend_ignore_children(&adap->dev, true);
+ pm_runtime_enable(&adap->dev);
+
+#ifdef CONFIG_I2C_COMPAT
+ res = class_compat_create_link(i2c_adapter_compat_class, &adap->dev,
+ adap->dev.parent);
+ if (res)
+ dev_warn(&adap->dev,
+ "Failed to create compatibility class link\n");
+#endif
+
+ i2c_init_recovery(adap);
+
+ /* create pre-declared device nodes */
+ of_i2c_register_devices(adap);
+ i2c_acpi_register_devices(adap);
+ i2c_acpi_install_space_handler(adap);
+
+ if (adap->nr < __i2c_first_dynamic_bus_num)
+ i2c_scan_static_board_info(adap);
+
+ /* Notify drivers */
+ mutex_lock(&core_lock);
+ bus_for_each_drv(&i2c_bus_type, NULL, adap, __process_new_adapter);
+ mutex_unlock(&core_lock);
+
+ return 0;
+
+out_list:
+ mutex_lock(&core_lock);
+ idr_remove(&i2c_adapter_idr, adap->nr);
+ mutex_unlock(&core_lock);
+ return res;
+}
+
+/**
+ * __i2c_add_numbered_adapter - i2c_add_numbered_adapter where nr is never -1
+ * @adap: the adapter to register (with adap->nr initialized)
+ * Context: can sleep
+ *
+ * See i2c_add_numbered_adapter() for details.
+ */
+static int __i2c_add_numbered_adapter(struct i2c_adapter *adap)
+{
+ int id;
+
+ mutex_lock(&core_lock);
+ id = idr_alloc(&i2c_adapter_idr, adap, adap->nr, adap->nr + 1, GFP_KERNEL);
+ mutex_unlock(&core_lock);
+ if (WARN(id < 0, "couldn't get idr"))
+ return id == -ENOSPC ? -EBUSY : id;
+
+ return i2c_register_adapter(adap);
+}
+
+/**
+ * i2c_add_adapter - declare i2c adapter, use dynamic bus number
+ * @adapter: the adapter to add
+ * Context: can sleep
+ *
+ * This routine is used to declare an I2C adapter when its bus number
+ * doesn't matter or when its bus number is specified by an dt alias.
+ * Examples of bases when the bus number doesn't matter: I2C adapters
+ * dynamically added by USB links or PCI plugin cards.
+ *
+ * When this returns zero, a new bus number was allocated and stored
+ * in adap->nr, and the specified adapter became available for clients.
+ * Otherwise, a negative errno value is returned.
+ */
+int i2c_add_adapter(struct i2c_adapter *adapter)
+{
+ struct device *dev = &adapter->dev;
+ int id;
+
+ if (dev->of_node) {
+ id = of_alias_get_id(dev->of_node, "i2c");
+ if (id >= 0) {
+ adapter->nr = id;
+ return __i2c_add_numbered_adapter(adapter);
+ }
+ }
+
+ mutex_lock(&core_lock);
+ id = idr_alloc(&i2c_adapter_idr, adapter,
+ __i2c_first_dynamic_bus_num, 0, GFP_KERNEL);
+ mutex_unlock(&core_lock);
+ if (WARN(id < 0, "couldn't get idr"))
+ return id;
+
+ adapter->nr = id;
+
+ return i2c_register_adapter(adapter);
+}
+EXPORT_SYMBOL(i2c_add_adapter);
+
+/**
+ * i2c_add_numbered_adapter - declare i2c adapter, use static bus number
+ * @adap: the adapter to register (with adap->nr initialized)
+ * Context: can sleep
+ *
+ * This routine is used to declare an I2C adapter when its bus number
+ * matters. For example, use it for I2C adapters from system-on-chip CPUs,
+ * or otherwise built in to the system's mainboard, and where i2c_board_info
+ * is used to properly configure I2C devices.
+ *
+ * If the requested bus number is set to -1, then this function will behave
+ * identically to i2c_add_adapter, and will dynamically assign a bus number.
+ *
+ * If no devices have pre-been declared for this bus, then be sure to
+ * register the adapter before any dynamically allocated ones. Otherwise
+ * the required bus ID may not be available.
+ *
+ * When this returns zero, the specified adapter became available for
+ * clients using the bus number provided in adap->nr. Also, the table
+ * of I2C devices pre-declared using i2c_register_board_info() is scanned,
+ * and the appropriate driver model device nodes are created. Otherwise, a
+ * negative errno value is returned.
+ */
+int i2c_add_numbered_adapter(struct i2c_adapter *adap)
+{
+ if (adap->nr == -1) /* -1 means dynamically assign bus id */
+ return i2c_add_adapter(adap);
+
+ return __i2c_add_numbered_adapter(adap);
+}
+EXPORT_SYMBOL_GPL(i2c_add_numbered_adapter);
+
+static void i2c_do_del_adapter(struct i2c_driver *driver,
+ struct i2c_adapter *adapter)
+{
+ struct i2c_client *client, *_n;
+
+ /* Remove the devices we created ourselves as the result of hardware
+ * probing (using a driver's detect method) */
+ list_for_each_entry_safe(client, _n, &driver->clients, detected) {
+ if (client->adapter == adapter) {
+ dev_dbg(&adapter->dev, "Removing %s at 0x%x\n",
+ client->name, client->addr);
+ list_del(&client->detected);
+ i2c_unregister_device(client);
+ }
+ }
+}
+
+static int __unregister_client(struct device *dev, void *dummy)
+{
+ struct i2c_client *client = i2c_verify_client(dev);
+ if (client && strcmp(client->name, "dummy"))
+ i2c_unregister_device(client);
+ return 0;
+}
+
+static int __unregister_dummy(struct device *dev, void *dummy)
+{
+ struct i2c_client *client = i2c_verify_client(dev);
+ if (client)
+ i2c_unregister_device(client);
+ return 0;
+}
+
+static int __process_removed_adapter(struct device_driver *d, void *data)
+{
+ i2c_do_del_adapter(to_i2c_driver(d), data);
+ return 0;
+}
+
+/**
+ * i2c_del_adapter - unregister I2C adapter
+ * @adap: the adapter being unregistered
+ * Context: can sleep
+ *
+ * This unregisters an I2C adapter which was previously registered
+ * by @i2c_add_adapter or @i2c_add_numbered_adapter.
+ */
+void i2c_del_adapter(struct i2c_adapter *adap)
+{
+ struct i2c_adapter *found;
+ struct i2c_client *client, *next;
+
+ /* First make sure that this adapter was ever added */
+ mutex_lock(&core_lock);
+ found = idr_find(&i2c_adapter_idr, adap->nr);
+ mutex_unlock(&core_lock);
+ if (found != adap) {
+ pr_debug("attempting to delete unregistered adapter [%s]\n", adap->name);
+ return;
+ }
+
+ i2c_acpi_remove_space_handler(adap);
+ /* Tell drivers about this removal */
+ mutex_lock(&core_lock);
+ bus_for_each_drv(&i2c_bus_type, NULL, adap,
+ __process_removed_adapter);
+ mutex_unlock(&core_lock);
+
+ /* Remove devices instantiated from sysfs */
+ mutex_lock_nested(&adap->userspace_clients_lock,
+ i2c_adapter_depth(adap));
+ list_for_each_entry_safe(client, next, &adap->userspace_clients,
+ detected) {
+ dev_dbg(&adap->dev, "Removing %s at 0x%x\n", client->name,
+ client->addr);
+ list_del(&client->detected);
+ i2c_unregister_device(client);
+ }
+ mutex_unlock(&adap->userspace_clients_lock);
+
+ /* Detach any active clients. This can't fail, thus we do not
+ * check the returned value. This is a two-pass process, because
+ * we can't remove the dummy devices during the first pass: they
+ * could have been instantiated by real devices wishing to clean
+ * them up properly, so we give them a chance to do that first. */
+ device_for_each_child(&adap->dev, NULL, __unregister_client);
+ device_for_each_child(&adap->dev, NULL, __unregister_dummy);
+
+#ifdef CONFIG_I2C_COMPAT
+ class_compat_remove_link(i2c_adapter_compat_class, &adap->dev,
+ adap->dev.parent);
+#endif
+
+ /* device name is gone after device_unregister */
+ dev_dbg(&adap->dev, "adapter [%s] unregistered\n", adap->name);
+
+ pm_runtime_disable(&adap->dev);
+
+ i2c_host_notify_irq_teardown(adap);
+
+ /* wait until all references to the device are gone
+ *
+ * FIXME: This is old code and should ideally be replaced by an
+ * alternative which results in decoupling the lifetime of the struct
+ * device from the i2c_adapter, like spi or netdev do. Any solution
+ * should be thoroughly tested with DEBUG_KOBJECT_RELEASE enabled!
+ */
+ init_completion(&adap->dev_released);
+ device_unregister(&adap->dev);
+ wait_for_completion(&adap->dev_released);
+
+ /* free bus id */
+ mutex_lock(&core_lock);
+ idr_remove(&i2c_adapter_idr, adap->nr);
+ mutex_unlock(&core_lock);
+
+ /* Clear the device structure in case this adapter is ever going to be
+ added again */
+ memset(&adap->dev, 0, sizeof(adap->dev));
+}
+EXPORT_SYMBOL(i2c_del_adapter);
+
+/**
+ * i2c_parse_fw_timings - get I2C related timing parameters from firmware
+ * @dev: The device to scan for I2C timing properties
+ * @t: the i2c_timings struct to be filled with values
+ * @use_defaults: bool to use sane defaults derived from the I2C specification
+ * when properties are not found, otherwise use 0
+ *
+ * Scan the device for the generic I2C properties describing timing parameters
+ * for the signal and fill the given struct with the results. If a property was
+ * not found and use_defaults was true, then maximum timings are assumed which
+ * are derived from the I2C specification. If use_defaults is not used, the
+ * results will be 0, so drivers can apply their own defaults later. The latter
+ * is mainly intended for avoiding regressions of existing drivers which want
+ * to switch to this function. New drivers almost always should use the defaults.
+ */
+
+void i2c_parse_fw_timings(struct device *dev, struct i2c_timings *t, bool use_defaults)
+{
+ int ret;
+
+ memset(t, 0, sizeof(*t));
+
+ ret = device_property_read_u32(dev, "clock-frequency", &t->bus_freq_hz);
+ if (ret && use_defaults)
+ t->bus_freq_hz = 100000;
+
+ ret = device_property_read_u32(dev, "i2c-scl-rising-time-ns", &t->scl_rise_ns);
+ if (ret && use_defaults) {
+ if (t->bus_freq_hz <= 100000)
+ t->scl_rise_ns = 1000;
+ else if (t->bus_freq_hz <= 400000)
+ t->scl_rise_ns = 300;
+ else
+ t->scl_rise_ns = 120;
+ }
+
+ ret = device_property_read_u32(dev, "i2c-scl-falling-time-ns", &t->scl_fall_ns);
+ if (ret && use_defaults) {
+ if (t->bus_freq_hz <= 400000)
+ t->scl_fall_ns = 300;
+ else
+ t->scl_fall_ns = 120;
+ }
+
+ device_property_read_u32(dev, "i2c-scl-internal-delay-ns", &t->scl_int_delay_ns);
+
+ ret = device_property_read_u32(dev, "i2c-sda-falling-time-ns", &t->sda_fall_ns);
+ if (ret && use_defaults)
+ t->sda_fall_ns = t->scl_fall_ns;
+}
+EXPORT_SYMBOL_GPL(i2c_parse_fw_timings);
+
+/* ------------------------------------------------------------------------- */
+
+int i2c_for_each_dev(void *data, int (*fn)(struct device *, void *))
+{
+ int res;
+
+ mutex_lock(&core_lock);
+ res = bus_for_each_dev(&i2c_bus_type, NULL, data, fn);
+ mutex_unlock(&core_lock);
+
+ return res;
+}
+EXPORT_SYMBOL_GPL(i2c_for_each_dev);
+
+static int __process_new_driver(struct device *dev, void *data)
+{
+ if (dev->type != &i2c_adapter_type)
+ return 0;
+ return i2c_do_add_adapter(data, to_i2c_adapter(dev));
+}
+
+/*
+ * An i2c_driver is used with one or more i2c_client (device) nodes to access
+ * i2c slave chips, on a bus instance associated with some i2c_adapter.
+ */
+
+int i2c_register_driver(struct module *owner, struct i2c_driver *driver)
+{
+ int res;
+
+ /* Can't register until after driver model init */
+ if (WARN_ON(!is_registered))
+ return -EAGAIN;
+
+ /* add the driver to the list of i2c drivers in the driver core */
+ driver->driver.owner = owner;
+ driver->driver.bus = &i2c_bus_type;
+ INIT_LIST_HEAD(&driver->clients);
+
+ /* When registration returns, the driver core
+ * will have called probe() for all matching-but-unbound devices.
+ */
+ res = driver_register(&driver->driver);
+ if (res)
+ return res;
+
+ pr_debug("driver [%s] registered\n", driver->driver.name);
+
+ /* Walk the adapters that are already present */
+ i2c_for_each_dev(driver, __process_new_driver);
+
+ return 0;
+}
+EXPORT_SYMBOL(i2c_register_driver);
+
+static int __process_removed_driver(struct device *dev, void *data)
+{
+ if (dev->type == &i2c_adapter_type)
+ i2c_do_del_adapter(data, to_i2c_adapter(dev));
+ return 0;
+}
+
+/**
+ * i2c_del_driver - unregister I2C driver
+ * @driver: the driver being unregistered
+ * Context: can sleep
+ */
+void i2c_del_driver(struct i2c_driver *driver)
+{
+ i2c_for_each_dev(driver, __process_removed_driver);
+
+ driver_unregister(&driver->driver);
+ pr_debug("driver [%s] unregistered\n", driver->driver.name);
+}
+EXPORT_SYMBOL(i2c_del_driver);
+
+/* ------------------------------------------------------------------------- */
+
+/**
+ * i2c_use_client - increments the reference count of the i2c client structure
+ * @client: the client being referenced
+ *
+ * Each live reference to a client should be refcounted. The driver model does
+ * that automatically as part of driver binding, so that most drivers don't
+ * need to do this explicitly: they hold a reference until they're unbound
+ * from the device.
+ *
+ * A pointer to the client with the incremented reference counter is returned.
+ */
+struct i2c_client *i2c_use_client(struct i2c_client *client)
+{
+ if (client && get_device(&client->dev))
+ return client;
+ return NULL;
+}
+EXPORT_SYMBOL(i2c_use_client);
+
+/**
+ * i2c_release_client - release a use of the i2c client structure
+ * @client: the client being no longer referenced
+ *
+ * Must be called when a user of a client is finished with it.
+ */
+void i2c_release_client(struct i2c_client *client)
+{
+ if (client)
+ put_device(&client->dev);
+}
+EXPORT_SYMBOL(i2c_release_client);
+
+struct i2c_cmd_arg {
+ unsigned cmd;
+ void *arg;
+};
+
+static int i2c_cmd(struct device *dev, void *_arg)
+{
+ struct i2c_client *client = i2c_verify_client(dev);
+ struct i2c_cmd_arg *arg = _arg;
+ struct i2c_driver *driver;
+
+ if (!client || !client->dev.driver)
+ return 0;
+
+ driver = to_i2c_driver(client->dev.driver);
+ if (driver->command)
+ driver->command(client, arg->cmd, arg->arg);
+ return 0;
+}
+
+void i2c_clients_command(struct i2c_adapter *adap, unsigned int cmd, void *arg)
+{
+ struct i2c_cmd_arg cmd_arg;
+
+ cmd_arg.cmd = cmd;
+ cmd_arg.arg = arg;
+ device_for_each_child(&adap->dev, &cmd_arg, i2c_cmd);
+}
+EXPORT_SYMBOL(i2c_clients_command);
+
+static int __init i2c_init(void)
+{
+ int retval;
+
+ retval = of_alias_get_highest_id("i2c");
+
+ down_write(&__i2c_board_lock);
+ if (retval >= __i2c_first_dynamic_bus_num)
+ __i2c_first_dynamic_bus_num = retval + 1;
+ up_write(&__i2c_board_lock);
+
+ retval = bus_register(&i2c_bus_type);
+ if (retval)
+ return retval;
+
+ is_registered = true;
+
+#ifdef CONFIG_I2C_COMPAT
+ i2c_adapter_compat_class = class_compat_register("i2c-adapter");
+ if (!i2c_adapter_compat_class) {
+ retval = -ENOMEM;
+ goto bus_err;
+ }
+#endif
+ retval = i2c_add_driver(&dummy_driver);
+ if (retval)
+ goto class_err;
+
+ if (IS_ENABLED(CONFIG_OF_DYNAMIC))
+ WARN_ON(of_reconfig_notifier_register(&i2c_of_notifier));
+ if (IS_ENABLED(CONFIG_ACPI))
+ WARN_ON(acpi_reconfig_notifier_register(&i2c_acpi_notifier));
+
+ return 0;
+
+class_err:
+#ifdef CONFIG_I2C_COMPAT
+ class_compat_unregister(i2c_adapter_compat_class);
+bus_err:
+#endif
+ is_registered = false;
+ bus_unregister(&i2c_bus_type);
+ return retval;
+}
+
+static void __exit i2c_exit(void)
+{
+ if (IS_ENABLED(CONFIG_ACPI))
+ WARN_ON(acpi_reconfig_notifier_unregister(&i2c_acpi_notifier));
+ if (IS_ENABLED(CONFIG_OF_DYNAMIC))
+ WARN_ON(of_reconfig_notifier_unregister(&i2c_of_notifier));
+ i2c_del_driver(&dummy_driver);
+#ifdef CONFIG_I2C_COMPAT
+ class_compat_unregister(i2c_adapter_compat_class);
+#endif
+ bus_unregister(&i2c_bus_type);
+ tracepoint_synchronize_unregister();
+}
+
+/* We must initialize early, because some subsystems register i2c drivers
+ * in subsys_initcall() code, but are linked (and initialized) before i2c.
+ */
+postcore_initcall(i2c_init);
+module_exit(i2c_exit);
+
+/* ----------------------------------------------------
+ * the functional interface to the i2c busses.
+ * ----------------------------------------------------
+ */
+
+/* Check if val is exceeding the quirk IFF quirk is non 0 */
+#define i2c_quirk_exceeded(val, quirk) ((quirk) && ((val) > (quirk)))
+
+static int i2c_quirk_error(struct i2c_adapter *adap, struct i2c_msg *msg, char *err_msg)
+{
+ dev_err_ratelimited(&adap->dev, "adapter quirk: %s (addr 0x%04x, size %u, %s)\n",
+ err_msg, msg->addr, msg->len,
+ msg->flags & I2C_M_RD ? "read" : "write");
+ return -EOPNOTSUPP;
+}
+
+static int i2c_check_for_quirks(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+ const struct i2c_adapter_quirks *q = adap->quirks;
+ int max_num = q->max_num_msgs, i;
+ bool do_len_check = true;
+
+ if (q->flags & I2C_AQ_COMB) {
+ max_num = 2;
+
+ /* special checks for combined messages */
+ if (num == 2) {
+ if (q->flags & I2C_AQ_COMB_WRITE_FIRST && msgs[0].flags & I2C_M_RD)
+ return i2c_quirk_error(adap, &msgs[0], "1st comb msg must be write");
+
+ if (q->flags & I2C_AQ_COMB_READ_SECOND && !(msgs[1].flags & I2C_M_RD))
+ return i2c_quirk_error(adap, &msgs[1], "2nd comb msg must be read");
+
+ if (q->flags & I2C_AQ_COMB_SAME_ADDR && msgs[0].addr != msgs[1].addr)
+ return i2c_quirk_error(adap, &msgs[0], "comb msg only to same addr");
+
+ if (i2c_quirk_exceeded(msgs[0].len, q->max_comb_1st_msg_len))
+ return i2c_quirk_error(adap, &msgs[0], "msg too long");
+
+ if (i2c_quirk_exceeded(msgs[1].len, q->max_comb_2nd_msg_len))
+ return i2c_quirk_error(adap, &msgs[1], "msg too long");
+
+ do_len_check = false;
+ }
+ }
+
+ if (i2c_quirk_exceeded(num, max_num))
+ return i2c_quirk_error(adap, &msgs[0], "too many messages");
+
+ for (i = 0; i < num; i++) {
+ u16 len = msgs[i].len;
+
+ if (msgs[i].flags & I2C_M_RD) {
+ if (do_len_check && i2c_quirk_exceeded(len, q->max_read_len))
+ return i2c_quirk_error(adap, &msgs[i], "msg too long");
+ } else {
+ if (do_len_check && i2c_quirk_exceeded(len, q->max_write_len))
+ return i2c_quirk_error(adap, &msgs[i], "msg too long");
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * __i2c_transfer - unlocked flavor of i2c_transfer
+ * @adap: Handle to I2C bus
+ * @msgs: One or more messages to execute before STOP is issued to
+ * terminate the operation; each message begins with a START.
+ * @num: Number of messages to be executed.
+ *
+ * Returns negative errno, else the number of messages executed.
+ *
+ * Adapter lock must be held when calling this function. No debug logging
+ * takes place. adap->algo->master_xfer existence isn't checked.
+ */
+int __i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+ unsigned long orig_jiffies;
+ int ret, try;
+
+ if (adap->quirks && i2c_check_for_quirks(adap, msgs, num))
+ return -EOPNOTSUPP;
+
+ /* i2c_trace_msg gets enabled when tracepoint i2c_transfer gets
+ * enabled. This is an efficient way of keeping the for-loop from
+ * being executed when not needed.
+ */
+ if (static_key_false(&i2c_trace_msg)) {
+ int i;
+ for (i = 0; i < num; i++)
+ if (msgs[i].flags & I2C_M_RD)
+ trace_i2c_read(adap, &msgs[i], i);
+ else
+ trace_i2c_write(adap, &msgs[i], i);
+ }
+
+ /* Retry automatically on arbitration loss */
+ orig_jiffies = jiffies;
+ for (ret = 0, try = 0; try <= adap->retries; try++) {
+ ret = adap->algo->master_xfer(adap, msgs, num);
+ if (ret != -EAGAIN)
+ break;
+ if (time_after(jiffies, orig_jiffies + adap->timeout))
+ break;
+ }
+
+ if (static_key_false(&i2c_trace_msg)) {
+ int i;
+ for (i = 0; i < ret; i++)
+ if (msgs[i].flags & I2C_M_RD)
+ trace_i2c_reply(adap, &msgs[i], i);
+ trace_i2c_result(adap, i, ret);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(__i2c_transfer);
+
+/**
+ * i2c_transfer - execute a single or combined I2C message
+ * @adap: Handle to I2C bus
+ * @msgs: One or more messages to execute before STOP is issued to
+ * terminate the operation; each message begins with a START.
+ * @num: Number of messages to be executed.
+ *
+ * Returns negative errno, else the number of messages executed.
+ *
+ * Note that there is no requirement that each message be sent to
+ * the same slave address, although that is the most common model.
+ */
+int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+ int ret;
+
+ /* REVISIT the fault reporting model here is weak:
+ *
+ * - When we get an error after receiving N bytes from a slave,
+ * there is no way to report "N".
+ *
+ * - When we get a NAK after transmitting N bytes to a slave,
+ * there is no way to report "N" ... or to let the master
+ * continue executing the rest of this combined message, if
+ * that's the appropriate response.
+ *
+ * - When for example "num" is two and we successfully complete
+ * the first message but get an error part way through the
+ * second, it's unclear whether that should be reported as
+ * one (discarding status on the second message) or errno
+ * (discarding status on the first one).
+ */
+
+ if (adap->algo->master_xfer) {
+#ifdef DEBUG
+ for (ret = 0; ret < num; ret++) {
+ dev_dbg(&adap->dev,
+ "master_xfer[%d] %c, addr=0x%02x, len=%d%s\n",
+ ret, (msgs[ret].flags & I2C_M_RD) ? 'R' : 'W',
+ msgs[ret].addr, msgs[ret].len,
+ (msgs[ret].flags & I2C_M_RECV_LEN) ? "+" : "");
+ }
+#endif
+
+ if (in_atomic() || irqs_disabled()) {
+ ret = i2c_trylock_bus(adap, I2C_LOCK_SEGMENT);
+ if (!ret)
+ /* I2C activity is ongoing. */
+ return -EAGAIN;
+ } else {
+ i2c_lock_bus(adap, I2C_LOCK_SEGMENT);
+ }
+
+ ret = __i2c_transfer(adap, msgs, num);
+ i2c_unlock_bus(adap, I2C_LOCK_SEGMENT);
+
+ return ret;
+ } else {
+ dev_dbg(&adap->dev, "I2C level transfers not supported\n");
+ return -EOPNOTSUPP;
+ }
+}
+EXPORT_SYMBOL(i2c_transfer);
+
+/**
+ * i2c_master_send - issue a single I2C message in master transmit mode
+ * @client: Handle to slave device
+ * @buf: Data that will be written to the slave
+ * @count: How many bytes to write, must be less than 64k since msg.len is u16
+ *
+ * Returns negative errno, or else the number of bytes written.
+ */
+int i2c_master_send(const struct i2c_client *client, const char *buf, int count)
+{
+ int ret;
+ struct i2c_adapter *adap = client->adapter;
+ struct i2c_msg msg;
+
+ msg.addr = client->addr;
+ msg.flags = client->flags & I2C_M_TEN;
+ msg.len = count;
+ msg.buf = (char *)buf;
+
+ ret = i2c_transfer(adap, &msg, 1);
+
+ /*
+ * If everything went ok (i.e. 1 msg transmitted), return #bytes
+ * transmitted, else error code.
+ */
+ return (ret == 1) ? count : ret;
+}
+EXPORT_SYMBOL(i2c_master_send);
+
+/**
+ * i2c_master_recv - issue a single I2C message in master receive mode
+ * @client: Handle to slave device
+ * @buf: Where to store data read from slave
+ * @count: How many bytes to read, must be less than 64k since msg.len is u16
+ *
+ * Returns negative errno, or else the number of bytes read.
+ */
+int i2c_master_recv(const struct i2c_client *client, char *buf, int count)
+{
+ struct i2c_adapter *adap = client->adapter;
+ struct i2c_msg msg;
+ int ret;
+
+ msg.addr = client->addr;
+ msg.flags = client->flags & I2C_M_TEN;
+ msg.flags |= I2C_M_RD;
+ msg.len = count;
+ msg.buf = buf;
+
+ ret = i2c_transfer(adap, &msg, 1);
+
+ /*
+ * If everything went ok (i.e. 1 msg received), return #bytes received,
+ * else error code.
+ */
+ return (ret == 1) ? count : ret;
+}
+EXPORT_SYMBOL(i2c_master_recv);
+
+/* ----------------------------------------------------
+ * the i2c address scanning function
+ * Will not work for 10-bit addresses!
+ * ----------------------------------------------------
+ */
+
+/*
+ * Legacy default probe function, mostly relevant for SMBus. The default
+ * probe method is a quick write, but it is known to corrupt the 24RF08
+ * EEPROMs due to a state machine bug, and could also irreversibly
+ * write-protect some EEPROMs, so for address ranges 0x30-0x37 and 0x50-0x5f,
+ * we use a short byte read instead. Also, some bus drivers don't implement
+ * quick write, so we fallback to a byte read in that case too.
+ * On x86, there is another special case for FSC hardware monitoring chips,
+ * which want regular byte reads (address 0x73.) Fortunately, these are the
+ * only known chips using this I2C address on PC hardware.
+ * Returns 1 if probe succeeded, 0 if not.
+ */
+static int i2c_default_probe(struct i2c_adapter *adap, unsigned short addr)
+{
+ int err;
+ union i2c_smbus_data dummy;
+
+#ifdef CONFIG_X86
+ if (addr == 0x73 && (adap->class & I2C_CLASS_HWMON)
+ && i2c_check_functionality(adap, I2C_FUNC_SMBUS_READ_BYTE_DATA))
+ err = i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_READ, 0,
+ I2C_SMBUS_BYTE_DATA, &dummy);
+ else
+#endif
+ if (!((addr & ~0x07) == 0x30 || (addr & ~0x0f) == 0x50)
+ && i2c_check_functionality(adap, I2C_FUNC_SMBUS_QUICK))
+ err = i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_WRITE, 0,
+ I2C_SMBUS_QUICK, NULL);
+ else if (i2c_check_functionality(adap, I2C_FUNC_SMBUS_READ_BYTE))
+ err = i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_READ, 0,
+ I2C_SMBUS_BYTE, &dummy);
+ else {
+ dev_warn(&adap->dev, "No suitable probing method supported for address 0x%02X\n",
+ addr);
+ err = -EOPNOTSUPP;
+ }
+
+ return err >= 0;
+}
+
+static int i2c_detect_address(struct i2c_client *temp_client,
+ struct i2c_driver *driver)
+{
+ struct i2c_board_info info;
+ struct i2c_adapter *adapter = temp_client->adapter;
+ int addr = temp_client->addr;
+ int err;
+
+ /* Make sure the address is valid */
+ err = i2c_check_7bit_addr_validity_strict(addr);
+ if (err) {
+ dev_warn(&adapter->dev, "Invalid probe address 0x%02x\n",
+ addr);
+ return err;
+ }
+
+ /* Skip if already in use (7 bit, no need to encode flags) */
+ if (i2c_check_addr_busy(adapter, addr))
+ return 0;
+
+ /* Make sure there is something at this address */
+ if (!i2c_default_probe(adapter, addr))
+ return 0;
+
+ /* Finally call the custom detection function */
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ info.addr = addr;
+ err = driver->detect(temp_client, &info);
+ if (err) {
+ /* -ENODEV is returned if the detection fails. We catch it
+ here as this isn't an error. */
+ return err == -ENODEV ? 0 : err;
+ }
+
+ /* Consistency check */
+ if (info.type[0] == '\0') {
+ dev_err(&adapter->dev,
+ "%s detection function provided no name for 0x%x\n",
+ driver->driver.name, addr);
+ } else {
+ struct i2c_client *client;
+
+ /* Detection succeeded, instantiate the device */
+ if (adapter->class & I2C_CLASS_DEPRECATED)
+ dev_warn(&adapter->dev,
+ "This adapter will soon drop class based instantiation of devices. "
+ "Please make sure client 0x%02x gets instantiated by other means. "
+ "Check 'Documentation/i2c/instantiating-devices' for details.\n",
+ info.addr);
+
+ dev_dbg(&adapter->dev, "Creating %s at 0x%02x\n",
+ info.type, info.addr);
+ client = i2c_new_device(adapter, &info);
+ if (client)
+ list_add_tail(&client->detected, &driver->clients);
+ else
+ dev_err(&adapter->dev, "Failed creating %s at 0x%02x\n",
+ info.type, info.addr);
+ }
+ return 0;
+}
+
+static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver)
+{
+ const unsigned short *address_list;
+ struct i2c_client *temp_client;
+ int i, err = 0;
+ int adap_id = i2c_adapter_id(adapter);
+
+ address_list = driver->address_list;
+ if (!driver->detect || !address_list)
+ return 0;
+
+ /* Warn that the adapter lost class based instantiation */
+ if (adapter->class == I2C_CLASS_DEPRECATED) {
+ dev_dbg(&adapter->dev,
+ "This adapter dropped support for I2C classes and won't auto-detect %s devices anymore. "
+ "If you need it, check 'Documentation/i2c/instantiating-devices' for alternatives.\n",
+ driver->driver.name);
+ return 0;
+ }
+
+ /* Stop here if the classes do not match */
+ if (!(adapter->class & driver->class))
+ return 0;
+
+ /* Set up a temporary client to help detect callback */
+ temp_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
+ if (!temp_client)
+ return -ENOMEM;
+ temp_client->adapter = adapter;
+
+ for (i = 0; address_list[i] != I2C_CLIENT_END; i += 1) {
+ dev_dbg(&adapter->dev,
+ "found normal entry for adapter %d, addr 0x%02x\n",
+ adap_id, address_list[i]);
+ temp_client->addr = address_list[i];
+ err = i2c_detect_address(temp_client, driver);
+ if (unlikely(err))
+ break;
+ }
+
+ kfree(temp_client);
+ return err;
+}
+
+int i2c_probe_func_quick_read(struct i2c_adapter *adap, unsigned short addr)
+{
+ return i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_READ, 0,
+ I2C_SMBUS_QUICK, NULL) >= 0;
+}
+EXPORT_SYMBOL_GPL(i2c_probe_func_quick_read);
+
+struct i2c_client *
+i2c_new_probed_device(struct i2c_adapter *adap,
+ struct i2c_board_info *info,
+ unsigned short const *addr_list,
+ int (*probe)(struct i2c_adapter *, unsigned short addr))
+{
+ int i;
+
+ if (!probe)
+ probe = i2c_default_probe;
+
+ for (i = 0; addr_list[i] != I2C_CLIENT_END; i++) {
+ /* Check address validity */
+ if (i2c_check_7bit_addr_validity_strict(addr_list[i]) < 0) {
+ dev_warn(&adap->dev, "Invalid 7-bit address 0x%02x\n",
+ addr_list[i]);
+ continue;
+ }
+
+ /* Check address availability (7 bit, no need to encode flags) */
+ if (i2c_check_addr_busy(adap, addr_list[i])) {
+ dev_dbg(&adap->dev,
+ "Address 0x%02x already in use, not probing\n",
+ addr_list[i]);
+ continue;
+ }
+
+ /* Test address responsiveness */
+ if (probe(adap, addr_list[i]))
+ break;
+ }
+
+ if (addr_list[i] == I2C_CLIENT_END) {
+ dev_dbg(&adap->dev, "Probing failed, no device found\n");
+ return NULL;
+ }
+
+ info->addr = addr_list[i];
+ return i2c_new_device(adap, info);
+}
+EXPORT_SYMBOL_GPL(i2c_new_probed_device);
+
+struct i2c_adapter *i2c_get_adapter(int nr)
+{
+ struct i2c_adapter *adapter;
+
+ mutex_lock(&core_lock);
+ adapter = idr_find(&i2c_adapter_idr, nr);
+ if (!adapter)
+ goto exit;
+
+ if (try_module_get(adapter->owner))
+ get_device(&adapter->dev);
+ else
+ adapter = NULL;
+
+ exit:
+ mutex_unlock(&core_lock);
+ return adapter;
+}
+EXPORT_SYMBOL(i2c_get_adapter);
+
+void i2c_put_adapter(struct i2c_adapter *adap)
+{
+ if (!adap)
+ return;
+
+ put_device(&adap->dev);
+ module_put(adap->owner);
+}
+EXPORT_SYMBOL(i2c_put_adapter);
+
+MODULE_AUTHOR("Simon G. Vogl <simon@tk.uni-linz.ac.at>");
+MODULE_DESCRIPTION("I2C-Bus main module");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/i2c-core-of.c b/drivers/i2c/i2c-core-of.c
new file mode 100644
index 0000000..ccf82fd
--- /dev/null
+++ b/drivers/i2c/i2c-core-of.c
@@ -0,0 +1,276 @@
+/*
+ * Linux I2C core OF support code
+ *
+ * Copyright (C) 2008 Jochen Friedrich <jochen@scram.de>
+ * based on a previous patch from Jon Smirl <jonsmirl@gmail.com>
+ *
+ * Copyright (C) 2013 Wolfram Sang <wsa@the-dreams.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <dt-bindings/i2c/i2c.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+#include "i2c-core.h"
+
+static struct i2c_client *of_i2c_register_device(struct i2c_adapter *adap,
+ struct device_node *node)
+{
+ struct i2c_client *result;
+ struct i2c_board_info info = {};
+ struct dev_archdata dev_ad = {};
+ const __be32 *addr_be;
+ u32 addr;
+ int len;
+
+ dev_dbg(&adap->dev, "of_i2c: register %s\n", node->full_name);
+
+ if (of_modalias_node(node, info.type, sizeof(info.type)) < 0) {
+ dev_err(&adap->dev, "of_i2c: modalias failure on %s\n",
+ node->full_name);
+ return ERR_PTR(-EINVAL);
+ }
+
+ addr_be = of_get_property(node, "reg", &len);
+ if (!addr_be || (len < sizeof(*addr_be))) {
+ dev_err(&adap->dev, "of_i2c: invalid reg on %s\n",
+ node->full_name);
+ return ERR_PTR(-EINVAL);
+ }
+
+ addr = be32_to_cpup(addr_be);
+ if (addr & I2C_TEN_BIT_ADDRESS) {
+ addr &= ~I2C_TEN_BIT_ADDRESS;
+ info.flags |= I2C_CLIENT_TEN;
+ }
+
+ if (addr & I2C_OWN_SLAVE_ADDRESS) {
+ addr &= ~I2C_OWN_SLAVE_ADDRESS;
+ info.flags |= I2C_CLIENT_SLAVE;
+ }
+
+ if (i2c_check_addr_validity(addr, info.flags)) {
+ dev_err(&adap->dev, "of_i2c: invalid addr=%x on %s\n",
+ addr, node->full_name);
+ return ERR_PTR(-EINVAL);
+ }
+
+ info.addr = addr;
+ info.of_node = of_node_get(node);
+ info.archdata = &dev_ad;
+
+ if (of_property_read_bool(node, "host-notify"))
+ info.flags |= I2C_CLIENT_HOST_NOTIFY;
+
+ if (of_get_property(node, "wakeup-source", NULL))
+ info.flags |= I2C_CLIENT_WAKE;
+
+ result = i2c_new_device(adap, &info);
+ if (result == NULL) {
+ dev_err(&adap->dev, "of_i2c: Failure registering %s\n",
+ node->full_name);
+ of_node_put(node);
+ return ERR_PTR(-EINVAL);
+ }
+ return result;
+}
+
+void of_i2c_register_devices(struct i2c_adapter *adap)
+{
+ struct device_node *bus, *node;
+ struct i2c_client *client;
+
+ /* Only register child devices if the adapter has a node pointer set */
+ if (!adap->dev.of_node)
+ return;
+
+ dev_dbg(&adap->dev, "of_i2c: walking child nodes\n");
+
+ bus = of_get_child_by_name(adap->dev.of_node, "i2c-bus");
+ if (!bus)
+ bus = of_node_get(adap->dev.of_node);
+
+ for_each_available_child_of_node(bus, node) {
+ if (of_node_test_and_set_flag(node, OF_POPULATED))
+ continue;
+
+ client = of_i2c_register_device(adap, node);
+ if (IS_ERR(client)) {
+ dev_warn(&adap->dev,
+ "Failed to create I2C device for %s\n",
+ node->full_name);
+ of_node_clear_flag(node, OF_POPULATED);
+ }
+ }
+
+ of_node_put(bus);
+}
+
+static int of_dev_node_match(struct device *dev, void *data)
+{
+ return dev->of_node == data;
+}
+
+/* must call put_device() when done with returned i2c_client device */
+struct i2c_client *of_find_i2c_device_by_node(struct device_node *node)
+{
+ struct device *dev;
+ struct i2c_client *client;
+
+ dev = bus_find_device(&i2c_bus_type, NULL, node, of_dev_node_match);
+ if (!dev)
+ return NULL;
+
+ client = i2c_verify_client(dev);
+ if (!client)
+ put_device(dev);
+
+ return client;
+}
+EXPORT_SYMBOL(of_find_i2c_device_by_node);
+
+/* must call put_device() when done with returned i2c_adapter device */
+struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node *node)
+{
+ struct device *dev;
+ struct i2c_adapter *adapter;
+
+ dev = bus_find_device(&i2c_bus_type, NULL, node, of_dev_node_match);
+ if (!dev)
+ return NULL;
+
+ adapter = i2c_verify_adapter(dev);
+ if (!adapter)
+ put_device(dev);
+
+ return adapter;
+}
+EXPORT_SYMBOL(of_find_i2c_adapter_by_node);
+
+/* must call i2c_put_adapter() when done with returned i2c_adapter device */
+struct i2c_adapter *of_get_i2c_adapter_by_node(struct device_node *node)
+{
+ struct i2c_adapter *adapter;
+
+ adapter = of_find_i2c_adapter_by_node(node);
+ if (!adapter)
+ return NULL;
+
+ if (!try_module_get(adapter->owner)) {
+ put_device(&adapter->dev);
+ adapter = NULL;
+ }
+
+ return adapter;
+}
+EXPORT_SYMBOL(of_get_i2c_adapter_by_node);
+
+static const struct of_device_id*
+i2c_of_match_device_sysfs(const struct of_device_id *matches,
+ struct i2c_client *client)
+{
+ const char *name;
+
+ for (; matches->compatible[0]; matches++) {
+ /*
+ * Adding devices through the i2c sysfs interface provides us
+ * a string to match which may be compatible with the device
+ * tree compatible strings, however with no actual of_node the
+ * of_match_device() will not match
+ */
+ if (sysfs_streq(client->name, matches->compatible))
+ return matches;
+
+ name = strchr(matches->compatible, ',');
+ if (!name)
+ name = matches->compatible;
+ else
+ name++;
+
+ if (sysfs_streq(client->name, name))
+ return matches;
+ }
+
+ return NULL;
+}
+
+const struct of_device_id
+*i2c_of_match_device(const struct of_device_id *matches,
+ struct i2c_client *client)
+{
+ const struct of_device_id *match;
+
+ if (!(client && matches))
+ return NULL;
+
+ match = of_match_device(matches, &client->dev);
+ if (match)
+ return match;
+
+ return i2c_of_match_device_sysfs(matches, client);
+}
+EXPORT_SYMBOL_GPL(i2c_of_match_device);
+
+#if IS_ENABLED(CONFIG_OF_DYNAMIC)
+static int of_i2c_notify(struct notifier_block *nb, unsigned long action,
+ void *arg)
+{
+ struct of_reconfig_data *rd = arg;
+ struct i2c_adapter *adap;
+ struct i2c_client *client;
+
+ switch (of_reconfig_get_state_change(action, rd)) {
+ case OF_RECONFIG_CHANGE_ADD:
+ adap = of_find_i2c_adapter_by_node(rd->dn->parent);
+ if (adap == NULL)
+ return NOTIFY_OK; /* not for us */
+
+ if (of_node_test_and_set_flag(rd->dn, OF_POPULATED)) {
+ put_device(&adap->dev);
+ return NOTIFY_OK;
+ }
+
+ client = of_i2c_register_device(adap, rd->dn);
+ put_device(&adap->dev);
+
+ if (IS_ERR(client)) {
+ dev_err(&adap->dev, "failed to create client for '%s'\n",
+ rd->dn->full_name);
+ of_node_clear_flag(rd->dn, OF_POPULATED);
+ return notifier_from_errno(PTR_ERR(client));
+ }
+ break;
+ case OF_RECONFIG_CHANGE_REMOVE:
+ /* already depopulated? */
+ if (!of_node_check_flag(rd->dn, OF_POPULATED))
+ return NOTIFY_OK;
+
+ /* find our device by node */
+ client = of_find_i2c_device_by_node(rd->dn);
+ if (client == NULL)
+ return NOTIFY_OK; /* no? not meant for us */
+
+ /* unregister takes one ref away */
+ i2c_unregister_device(client);
+
+ /* and put the reference of the find */
+ put_device(&client->dev);
+ break;
+ }
+
+ return NOTIFY_OK;
+}
+
+struct notifier_block i2c_of_notifier = {
+ .notifier_call = of_i2c_notify,
+};
+#endif /* CONFIG_OF_DYNAMIC */
diff --git a/drivers/i2c/i2c-core-slave.c b/drivers/i2c/i2c-core-slave.c
new file mode 100644
index 0000000..4a78c65
--- /dev/null
+++ b/drivers/i2c/i2c-core-slave.c
@@ -0,0 +1,115 @@
+/*
+ * Linux I2C core slave support code
+ *
+ * Copyright (C) 2014 by Wolfram Sang <wsa@sang-engineering.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <dt-bindings/i2c/i2c.h>
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/of.h>
+
+#include "i2c-core.h"
+
+int i2c_slave_register(struct i2c_client *client, i2c_slave_cb_t slave_cb)
+{
+ int ret;
+
+ if (!client || !slave_cb) {
+ WARN(1, "insufficient data\n");
+ return -EINVAL;
+ }
+
+ if (!(client->flags & I2C_CLIENT_SLAVE))
+ dev_warn(&client->dev, "%s: client slave flag not set. You might see address collisions\n",
+ __func__);
+
+ if (!(client->flags & I2C_CLIENT_TEN)) {
+ /* Enforce stricter address checking */
+ ret = i2c_check_7bit_addr_validity_strict(client->addr);
+ if (ret) {
+ dev_err(&client->dev, "%s: invalid address\n", __func__);
+ return ret;
+ }
+ }
+
+ if (!client->adapter->algo->reg_slave) {
+ dev_err(&client->dev, "%s: not supported by adapter\n", __func__);
+ return -EOPNOTSUPP;
+ }
+
+ client->slave_cb = slave_cb;
+
+ i2c_lock_adapter(client->adapter);
+ ret = client->adapter->algo->reg_slave(client);
+ i2c_unlock_adapter(client->adapter);
+
+ if (ret) {
+ client->slave_cb = NULL;
+ dev_err(&client->dev, "%s: adapter returned error %d\n", __func__, ret);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(i2c_slave_register);
+
+int i2c_slave_unregister(struct i2c_client *client)
+{
+ int ret;
+
+ if (!client->adapter->algo->unreg_slave) {
+ dev_err(&client->dev, "%s: not supported by adapter\n", __func__);
+ return -EOPNOTSUPP;
+ }
+
+ i2c_lock_adapter(client->adapter);
+ ret = client->adapter->algo->unreg_slave(client);
+ i2c_unlock_adapter(client->adapter);
+
+ if (ret == 0)
+ client->slave_cb = NULL;
+ else
+ dev_err(&client->dev, "%s: adapter returned error %d\n", __func__, ret);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(i2c_slave_unregister);
+
+/**
+ * i2c_detect_slave_mode - detect operation mode
+ * @dev: The device owning the bus
+ *
+ * This checks the device nodes for an I2C slave by checking the address
+ * used in the reg property. If the address match the I2C_OWN_SLAVE_ADDRESS
+ * flag this means the device is configured to act as a I2C slave and it will
+ * be listening at that address.
+ *
+ * Returns true if an I2C own slave address is detected, otherwise returns
+ * false.
+ */
+bool i2c_detect_slave_mode(struct device *dev)
+{
+ if (IS_BUILTIN(CONFIG_OF) && dev->of_node) {
+ struct device_node *child;
+ u32 reg;
+
+ for_each_child_of_node(dev->of_node, child) {
+ of_property_read_u32(child, "reg", ®);
+ if (reg & I2C_OWN_SLAVE_ADDRESS) {
+ of_node_put(child);
+ return true;
+ }
+ }
+ } else if (IS_BUILTIN(CONFIG_ACPI) && ACPI_HANDLE(dev)) {
+ dev_dbg(dev, "ACPI slave is not supported yet\n");
+ }
+ return false;
+}
+EXPORT_SYMBOL_GPL(i2c_detect_slave_mode);
diff --git a/drivers/i2c/i2c-core-smbus.c b/drivers/i2c/i2c-core-smbus.c
new file mode 100644
index 0000000..10f00a8
--- /dev/null
+++ b/drivers/i2c/i2c-core-smbus.c
@@ -0,0 +1,594 @@
+/*
+ * Linux I2C core SMBus and SMBus emulation code
+ *
+ * This file contains the SMBus functions which are always included in the I2C
+ * core because they can be emulated via I2C. SMBus specific extensions
+ * (e.g. smbalert) are handled in a seperate i2c-smbus module.
+ *
+ * All SMBus-related things are written by Frodo Looijaard <frodol@dds.nl>
+ * SMBus 2.0 support by Mark Studebaker <mdsxyz123@yahoo.com> and
+ * Jean Delvare <jdelvare@suse.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/smbus.h>
+
+
+/* The SMBus parts */
+
+#define POLY (0x1070U << 3)
+static u8 crc8(u16 data)
+{
+ int i;
+
+ for (i = 0; i < 8; i++) {
+ if (data & 0x8000)
+ data = data ^ POLY;
+ data = data << 1;
+ }
+ return (u8)(data >> 8);
+}
+
+/* Incremental CRC8 over count bytes in the array pointed to by p */
+static u8 i2c_smbus_pec(u8 crc, u8 *p, size_t count)
+{
+ int i;
+
+ for (i = 0; i < count; i++)
+ crc = crc8((crc ^ p[i]) << 8);
+ return crc;
+}
+
+/* Assume a 7-bit address, which is reasonable for SMBus */
+static u8 i2c_smbus_msg_pec(u8 pec, struct i2c_msg *msg)
+{
+ /* The address will be sent first */
+ u8 addr = i2c_8bit_addr_from_msg(msg);
+ pec = i2c_smbus_pec(pec, &addr, 1);
+
+ /* The data buffer follows */
+ return i2c_smbus_pec(pec, msg->buf, msg->len);
+}
+
+/* Used for write only transactions */
+static inline void i2c_smbus_add_pec(struct i2c_msg *msg)
+{
+ msg->buf[msg->len] = i2c_smbus_msg_pec(0, msg);
+ msg->len++;
+}
+
+/* Return <0 on CRC error
+ If there was a write before this read (most cases) we need to take the
+ partial CRC from the write part into account.
+ Note that this function does modify the message (we need to decrease the
+ message length to hide the CRC byte from the caller). */
+static int i2c_smbus_check_pec(u8 cpec, struct i2c_msg *msg)
+{
+ u8 rpec = msg->buf[--msg->len];
+ cpec = i2c_smbus_msg_pec(cpec, msg);
+
+ if (rpec != cpec) {
+ pr_debug("Bad PEC 0x%02x vs. 0x%02x\n",
+ rpec, cpec);
+ return -EBADMSG;
+ }
+ return 0;
+}
+
+/**
+ * i2c_smbus_read_byte - SMBus "receive byte" protocol
+ * @client: Handle to slave device
+ *
+ * This executes the SMBus "receive byte" protocol, returning negative errno
+ * else the byte received from the device.
+ */
+s32 i2c_smbus_read_byte(const struct i2c_client *client)
+{
+ union i2c_smbus_data data;
+ int status;
+
+ status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+ I2C_SMBUS_READ, 0,
+ I2C_SMBUS_BYTE, &data);
+ return (status < 0) ? status : data.byte;
+}
+EXPORT_SYMBOL(i2c_smbus_read_byte);
+
+/**
+ * i2c_smbus_write_byte - SMBus "send byte" protocol
+ * @client: Handle to slave device
+ * @value: Byte to be sent
+ *
+ * This executes the SMBus "send byte" protocol, returning negative errno
+ * else zero on success.
+ */
+s32 i2c_smbus_write_byte(const struct i2c_client *client, u8 value)
+{
+ return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+ I2C_SMBUS_WRITE, value, I2C_SMBUS_BYTE, NULL);
+}
+EXPORT_SYMBOL(i2c_smbus_write_byte);
+
+/**
+ * i2c_smbus_read_byte_data - SMBus "read byte" protocol
+ * @client: Handle to slave device
+ * @command: Byte interpreted by slave
+ *
+ * This executes the SMBus "read byte" protocol, returning negative errno
+ * else a data byte received from the device.
+ */
+s32 i2c_smbus_read_byte_data(const struct i2c_client *client, u8 command)
+{
+ union i2c_smbus_data data;
+ int status;
+
+ status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+ I2C_SMBUS_READ, command,
+ I2C_SMBUS_BYTE_DATA, &data);
+ return (status < 0) ? status : data.byte;
+}
+EXPORT_SYMBOL(i2c_smbus_read_byte_data);
+
+/**
+ * i2c_smbus_write_byte_data - SMBus "write byte" protocol
+ * @client: Handle to slave device
+ * @command: Byte interpreted by slave
+ * @value: Byte being written
+ *
+ * This executes the SMBus "write byte" protocol, returning negative errno
+ * else zero on success.
+ */
+s32 i2c_smbus_write_byte_data(const struct i2c_client *client, u8 command,
+ u8 value)
+{
+ union i2c_smbus_data data;
+ data.byte = value;
+ return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+ I2C_SMBUS_WRITE, command,
+ I2C_SMBUS_BYTE_DATA, &data);
+}
+EXPORT_SYMBOL(i2c_smbus_write_byte_data);
+
+/**
+ * i2c_smbus_read_word_data - SMBus "read word" protocol
+ * @client: Handle to slave device
+ * @command: Byte interpreted by slave
+ *
+ * This executes the SMBus "read word" protocol, returning negative errno
+ * else a 16-bit unsigned "word" received from the device.
+ */
+s32 i2c_smbus_read_word_data(const struct i2c_client *client, u8 command)
+{
+ union i2c_smbus_data data;
+ int status;
+
+ status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+ I2C_SMBUS_READ, command,
+ I2C_SMBUS_WORD_DATA, &data);
+ return (status < 0) ? status : data.word;
+}
+EXPORT_SYMBOL(i2c_smbus_read_word_data);
+
+/**
+ * i2c_smbus_write_word_data - SMBus "write word" protocol
+ * @client: Handle to slave device
+ * @command: Byte interpreted by slave
+ * @value: 16-bit "word" being written
+ *
+ * This executes the SMBus "write word" protocol, returning negative errno
+ * else zero on success.
+ */
+s32 i2c_smbus_write_word_data(const struct i2c_client *client, u8 command,
+ u16 value)
+{
+ union i2c_smbus_data data;
+ data.word = value;
+ return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+ I2C_SMBUS_WRITE, command,
+ I2C_SMBUS_WORD_DATA, &data);
+}
+EXPORT_SYMBOL(i2c_smbus_write_word_data);
+
+/**
+ * i2c_smbus_read_block_data - SMBus "block read" protocol
+ * @client: Handle to slave device
+ * @command: Byte interpreted by slave
+ * @values: Byte array into which data will be read; big enough to hold
+ * the data returned by the slave. SMBus allows at most 32 bytes.
+ *
+ * This executes the SMBus "block read" protocol, returning negative errno
+ * else the number of data bytes in the slave's response.
+ *
+ * Note that using this function requires that the client's adapter support
+ * the I2C_FUNC_SMBUS_READ_BLOCK_DATA functionality. Not all adapter drivers
+ * support this; its emulation through I2C messaging relies on a specific
+ * mechanism (I2C_M_RECV_LEN) which may not be implemented.
+ */
+s32 i2c_smbus_read_block_data(const struct i2c_client *client, u8 command,
+ u8 *values)
+{
+ union i2c_smbus_data data;
+ int status;
+
+ status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+ I2C_SMBUS_READ, command,
+ I2C_SMBUS_BLOCK_DATA, &data);
+ if (status)
+ return status;
+
+ memcpy(values, &data.block[1], data.block[0]);
+ return data.block[0];
+}
+EXPORT_SYMBOL(i2c_smbus_read_block_data);
+
+/**
+ * i2c_smbus_write_block_data - SMBus "block write" protocol
+ * @client: Handle to slave device
+ * @command: Byte interpreted by slave
+ * @length: Size of data block; SMBus allows at most 32 bytes
+ * @values: Byte array which will be written.
+ *
+ * This executes the SMBus "block write" protocol, returning negative errno
+ * else zero on success.
+ */
+s32 i2c_smbus_write_block_data(const struct i2c_client *client, u8 command,
+ u8 length, const u8 *values)
+{
+ union i2c_smbus_data data;
+
+ if (length > I2C_SMBUS_BLOCK_MAX)
+ length = I2C_SMBUS_BLOCK_MAX;
+ data.block[0] = length;
+ memcpy(&data.block[1], values, length);
+ return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+ I2C_SMBUS_WRITE, command,
+ I2C_SMBUS_BLOCK_DATA, &data);
+}
+EXPORT_SYMBOL(i2c_smbus_write_block_data);
+
+/* Returns the number of read bytes */
+s32 i2c_smbus_read_i2c_block_data(const struct i2c_client *client, u8 command,
+ u8 length, u8 *values)
+{
+ union i2c_smbus_data data;
+ int status;
+
+ if (length > I2C_SMBUS_BLOCK_MAX)
+ length = I2C_SMBUS_BLOCK_MAX;
+ data.block[0] = length;
+ status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+ I2C_SMBUS_READ, command,
+ I2C_SMBUS_I2C_BLOCK_DATA, &data);
+ if (status < 0)
+ return status;
+
+ memcpy(values, &data.block[1], data.block[0]);
+ return data.block[0];
+}
+EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data);
+
+s32 i2c_smbus_write_i2c_block_data(const struct i2c_client *client, u8 command,
+ u8 length, const u8 *values)
+{
+ union i2c_smbus_data data;
+
+ if (length > I2C_SMBUS_BLOCK_MAX)
+ length = I2C_SMBUS_BLOCK_MAX;
+ data.block[0] = length;
+ memcpy(data.block + 1, values, length);
+ return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+ I2C_SMBUS_WRITE, command,
+ I2C_SMBUS_I2C_BLOCK_DATA, &data);
+}
+EXPORT_SYMBOL(i2c_smbus_write_i2c_block_data);
+
+/* Simulate a SMBus command using the i2c protocol
+ No checking of parameters is done! */
+static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr,
+ unsigned short flags,
+ char read_write, u8 command, int size,
+ union i2c_smbus_data *data)
+{
+ /* So we need to generate a series of msgs. In the case of writing, we
+ need to use only one message; when reading, we need two. We initialize
+ most things with sane defaults, to keep the code below somewhat
+ simpler. */
+ unsigned char msgbuf0[I2C_SMBUS_BLOCK_MAX+3];
+ unsigned char msgbuf1[I2C_SMBUS_BLOCK_MAX+2];
+ int num = read_write == I2C_SMBUS_READ ? 2 : 1;
+ int i;
+ u8 partial_pec = 0;
+ int status;
+ struct i2c_msg msg[2] = {
+ {
+ .addr = addr,
+ .flags = flags,
+ .len = 1,
+ .buf = msgbuf0,
+ }, {
+ .addr = addr,
+ .flags = flags | I2C_M_RD,
+ .len = 0,
+ .buf = msgbuf1,
+ },
+ };
+
+ msgbuf0[0] = command;
+ switch (size) {
+ case I2C_SMBUS_QUICK:
+ msg[0].len = 0;
+ /* Special case: The read/write field is used as data */
+ msg[0].flags = flags | (read_write == I2C_SMBUS_READ ?
+ I2C_M_RD : 0);
+ num = 1;
+ break;
+ case I2C_SMBUS_BYTE:
+ if (read_write == I2C_SMBUS_READ) {
+ /* Special case: only a read! */
+ msg[0].flags = I2C_M_RD | flags;
+ num = 1;
+ }
+ break;
+ case I2C_SMBUS_BYTE_DATA:
+ if (read_write == I2C_SMBUS_READ)
+ msg[1].len = 1;
+ else {
+ msg[0].len = 2;
+ msgbuf0[1] = data->byte;
+ }
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ if (read_write == I2C_SMBUS_READ)
+ msg[1].len = 2;
+ else {
+ msg[0].len = 3;
+ msgbuf0[1] = data->word & 0xff;
+ msgbuf0[2] = data->word >> 8;
+ }
+ break;
+ case I2C_SMBUS_PROC_CALL:
+ num = 2; /* Special case */
+ read_write = I2C_SMBUS_READ;
+ msg[0].len = 3;
+ msg[1].len = 2;
+ msgbuf0[1] = data->word & 0xff;
+ msgbuf0[2] = data->word >> 8;
+ break;
+ case I2C_SMBUS_BLOCK_DATA:
+ if (read_write == I2C_SMBUS_READ) {
+ msg[1].flags |= I2C_M_RECV_LEN;
+ msg[1].len = 1; /* block length will be added by
+ the underlying bus driver */
+ } else {
+ msg[0].len = data->block[0] + 2;
+ if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 2) {
+ dev_err(&adapter->dev,
+ "Invalid block write size %d\n",
+ data->block[0]);
+ return -EINVAL;
+ }
+ for (i = 1; i < msg[0].len; i++)
+ msgbuf0[i] = data->block[i-1];
+ }
+ break;
+ case I2C_SMBUS_BLOCK_PROC_CALL:
+ num = 2; /* Another special case */
+ read_write = I2C_SMBUS_READ;
+ if (data->block[0] > I2C_SMBUS_BLOCK_MAX) {
+ dev_err(&adapter->dev,
+ "Invalid block write size %d\n",
+ data->block[0]);
+ return -EINVAL;
+ }
+ msg[0].len = data->block[0] + 2;
+ for (i = 1; i < msg[0].len; i++)
+ msgbuf0[i] = data->block[i-1];
+ msg[1].flags |= I2C_M_RECV_LEN;
+ msg[1].len = 1; /* block length will be added by
+ the underlying bus driver */
+ break;
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ if (read_write == I2C_SMBUS_READ) {
+ msg[1].len = data->block[0];
+ } else {
+ msg[0].len = data->block[0] + 1;
+ if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 1) {
+ dev_err(&adapter->dev,
+ "Invalid block write size %d\n",
+ data->block[0]);
+ return -EINVAL;
+ }
+ for (i = 1; i <= data->block[0]; i++)
+ msgbuf0[i] = data->block[i];
+ }
+ break;
+ default:
+ dev_err(&adapter->dev, "Unsupported transaction %d\n", size);
+ return -EOPNOTSUPP;
+ }
+
+ i = ((flags & I2C_CLIENT_PEC) && size != I2C_SMBUS_QUICK
+ && size != I2C_SMBUS_I2C_BLOCK_DATA);
+ if (i) {
+ /* Compute PEC if first message is a write */
+ if (!(msg[0].flags & I2C_M_RD)) {
+ if (num == 1) /* Write only */
+ i2c_smbus_add_pec(&msg[0]);
+ else /* Write followed by read */
+ partial_pec = i2c_smbus_msg_pec(0, &msg[0]);
+ }
+ /* Ask for PEC if last message is a read */
+ if (msg[num-1].flags & I2C_M_RD)
+ msg[num-1].len++;
+ }
+
+ status = i2c_transfer(adapter, msg, num);
+ if (status < 0)
+ return status;
+
+ /* Check PEC if last message is a read */
+ if (i && (msg[num-1].flags & I2C_M_RD)) {
+ status = i2c_smbus_check_pec(partial_pec, &msg[num-1]);
+ if (status < 0)
+ return status;
+ }
+
+ if (read_write == I2C_SMBUS_READ)
+ switch (size) {
+ case I2C_SMBUS_BYTE:
+ data->byte = msgbuf0[0];
+ break;
+ case I2C_SMBUS_BYTE_DATA:
+ data->byte = msgbuf1[0];
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ case I2C_SMBUS_PROC_CALL:
+ data->word = msgbuf1[0] | (msgbuf1[1] << 8);
+ break;
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ for (i = 0; i < data->block[0]; i++)
+ data->block[i+1] = msgbuf1[i];
+ break;
+ case I2C_SMBUS_BLOCK_DATA:
+ case I2C_SMBUS_BLOCK_PROC_CALL:
+ for (i = 0; i < msgbuf1[0] + 1; i++)
+ data->block[i] = msgbuf1[i];
+ break;
+ }
+ return 0;
+}
+
+/**
+ * i2c_smbus_xfer - execute SMBus protocol operations
+ * @adapter: Handle to I2C bus
+ * @addr: Address of SMBus slave on that bus
+ * @flags: I2C_CLIENT_* flags (usually zero or I2C_CLIENT_PEC)
+ * @read_write: I2C_SMBUS_READ or I2C_SMBUS_WRITE
+ * @command: Byte interpreted by slave, for protocols which use such bytes
+ * @protocol: SMBus protocol operation to execute, such as I2C_SMBUS_PROC_CALL
+ * @data: Data to be read or written
+ *
+ * This executes an SMBus protocol operation, and returns a negative
+ * errno code else zero on success.
+ */
+s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, unsigned short flags,
+ char read_write, u8 command, int protocol,
+ union i2c_smbus_data *data)
+{
+ unsigned long orig_jiffies;
+ int try;
+ s32 res;
+
+ /* If enabled, the following two tracepoints are conditional on
+ * read_write and protocol.
+ */
+ trace_smbus_write(adapter, addr, flags, read_write,
+ command, protocol, data);
+ trace_smbus_read(adapter, addr, flags, read_write,
+ command, protocol);
+
+ flags &= I2C_M_TEN | I2C_CLIENT_PEC | I2C_CLIENT_SCCB;
+
+ if (adapter->algo->smbus_xfer) {
+ i2c_lock_bus(adapter, I2C_LOCK_SEGMENT);
+
+ /* Retry automatically on arbitration loss */
+ orig_jiffies = jiffies;
+ for (res = 0, try = 0; try <= adapter->retries; try++) {
+ res = adapter->algo->smbus_xfer(adapter, addr, flags,
+ read_write, command,
+ protocol, data);
+ if (res != -EAGAIN)
+ break;
+ if (time_after(jiffies,
+ orig_jiffies + adapter->timeout))
+ break;
+ }
+ i2c_unlock_bus(adapter, I2C_LOCK_SEGMENT);
+
+ if (res != -EOPNOTSUPP || !adapter->algo->master_xfer)
+ goto trace;
+ /*
+ * Fall back to i2c_smbus_xfer_emulated if the adapter doesn't
+ * implement native support for the SMBus operation.
+ */
+ }
+
+ res = i2c_smbus_xfer_emulated(adapter, addr, flags, read_write,
+ command, protocol, data);
+
+trace:
+ /* If enabled, the reply tracepoint is conditional on read_write. */
+ trace_smbus_reply(adapter, addr, flags, read_write,
+ command, protocol, data);
+ trace_smbus_result(adapter, addr, flags, read_write,
+ command, protocol, res);
+
+ return res;
+}
+EXPORT_SYMBOL(i2c_smbus_xfer);
+
+/**
+ * i2c_smbus_read_i2c_block_data_or_emulated - read block or emulate
+ * @client: Handle to slave device
+ * @command: Byte interpreted by slave
+ * @length: Size of data block; SMBus allows at most I2C_SMBUS_BLOCK_MAX bytes
+ * @values: Byte array into which data will be read; big enough to hold
+ * the data returned by the slave. SMBus allows at most
+ * I2C_SMBUS_BLOCK_MAX bytes.
+ *
+ * This executes the SMBus "block read" protocol if supported by the adapter.
+ * If block read is not supported, it emulates it using either word or byte
+ * read protocols depending on availability.
+ *
+ * The addresses of the I2C slave device that are accessed with this function
+ * must be mapped to a linear region, so that a block read will have the same
+ * effect as a byte read. Before using this function you must double-check
+ * if the I2C slave does support exchanging a block transfer with a byte
+ * transfer.
+ */
+s32 i2c_smbus_read_i2c_block_data_or_emulated(const struct i2c_client *client,
+ u8 command, u8 length, u8 *values)
+{
+ u8 i = 0;
+ int status;
+
+ if (length > I2C_SMBUS_BLOCK_MAX)
+ length = I2C_SMBUS_BLOCK_MAX;
+
+ if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK))
+ return i2c_smbus_read_i2c_block_data(client, command, length, values);
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA))
+ return -EOPNOTSUPP;
+
+ if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_WORD_DATA)) {
+ while ((i + 2) <= length) {
+ status = i2c_smbus_read_word_data(client, command + i);
+ if (status < 0)
+ return status;
+ values[i] = status & 0xff;
+ values[i + 1] = status >> 8;
+ i += 2;
+ }
+ }
+
+ while (i < length) {
+ status = i2c_smbus_read_byte_data(client, command + i);
+ if (status < 0)
+ return status;
+ values[i] = status;
+ i++;
+ }
+
+ return i;
+}
+EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data_or_emulated);
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
deleted file mode 100644
index 82576aa..0000000
--- a/drivers/i2c/i2c-core.c
+++ /dev/null
@@ -1,3831 +0,0 @@
-/* i2c-core.c - a device driver for the iic-bus interface */
-/* ------------------------------------------------------------------------- */
-/* Copyright (C) 1995-99 Simon G. Vogl
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details. */
-/* ------------------------------------------------------------------------- */
-
-/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi>.
- All SMBus-related things are written by Frodo Looijaard <frodol@dds.nl>
- SMBus 2.0 support by Mark Studebaker <mdsxyz123@yahoo.com> and
- Jean Delvare <jdelvare@suse.de>
- Mux support by Rodolfo Giometti <giometti@enneenne.com> and
- Michael Lawnick <michael.lawnick.ext@nsn.com>
- OF support is copyright (c) 2008 Jochen Friedrich <jochen@scram.de>
- (based on a previous patch from Jon Smirl <jonsmirl@gmail.com>) and
- (c) 2013 Wolfram Sang <wsa@the-dreams.de>
- I2C ACPI code Copyright (C) 2014 Intel Corp
- Author: Lan Tianyu <tianyu.lan@intel.com>
- I2C slave support (c) 2014 by Wolfram Sang <wsa@sang-engineering.com>
- */
-
-#define pr_fmt(fmt) "i2c-core: " fmt
-
-#include <dt-bindings/i2c/i2c.h>
-#include <linux/uaccess.h>
-#include <linux/acpi.h>
-#include <linux/clk/clk-conf.h>
-#include <linux/completion.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/errno.h>
-#include <linux/gpio.h>
-#include <linux/hardirq.h>
-#include <linux/i2c.h>
-#include <linux/idr.h>
-#include <linux/init.h>
-#include <linux/irqflags.h>
-#include <linux/jump_label.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/of_device.h>
-#include <linux/of.h>
-#include <linux/of_irq.h>
-#include <linux/pm_domain.h>
-#include <linux/pm_runtime.h>
-#include <linux/pm_wakeirq.h>
-#include <linux/property.h>
-#include <linux/rwsem.h>
-#include <linux/slab.h>
-
-#include "i2c-core.h"
-
-#define CREATE_TRACE_POINTS
-#include <trace/events/i2c.h>
-
-#define I2C_ADDR_OFFSET_TEN_BIT 0xa000
-#define I2C_ADDR_OFFSET_SLAVE 0x1000
-
-#define I2C_ADDR_7BITS_MAX 0x77
-#define I2C_ADDR_7BITS_COUNT (I2C_ADDR_7BITS_MAX + 1)
-
-/* core_lock protects i2c_adapter_idr, and guarantees
- that device detection, deletion of detected devices, and attach_adapter
- calls are serialized */
-static DEFINE_MUTEX(core_lock);
-static DEFINE_IDR(i2c_adapter_idr);
-
-static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver);
-
-static struct static_key i2c_trace_msg = STATIC_KEY_INIT_FALSE;
-static bool is_registered;
-
-int i2c_transfer_trace_reg(void)
-{
- static_key_slow_inc(&i2c_trace_msg);
- return 0;
-}
-
-void i2c_transfer_trace_unreg(void)
-{
- static_key_slow_dec(&i2c_trace_msg);
-}
-
-#if defined(CONFIG_ACPI)
-struct i2c_acpi_handler_data {
- struct acpi_connection_info info;
- struct i2c_adapter *adapter;
-};
-
-struct gsb_buffer {
- u8 status;
- u8 len;
- union {
- u16 wdata;
- u8 bdata;
- u8 data[0];
- };
-} __packed;
-
-struct i2c_acpi_lookup {
- struct i2c_board_info *info;
- acpi_handle adapter_handle;
- acpi_handle device_handle;
- acpi_handle search_handle;
- int n;
- int index;
- u32 speed;
- u32 min_speed;
-};
-
-static int i2c_acpi_fill_info(struct acpi_resource *ares, void *data)
-{
- struct i2c_acpi_lookup *lookup = data;
- struct i2c_board_info *info = lookup->info;
- struct acpi_resource_i2c_serialbus *sb;
- acpi_status status;
-
- if (info->addr || ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS)
- return 1;
-
- sb = &ares->data.i2c_serial_bus;
- if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C)
- return 1;
-
- if (lookup->index != -1 && lookup->n++ != lookup->index)
- return 1;
-
- status = acpi_get_handle(lookup->device_handle,
- sb->resource_source.string_ptr,
- &lookup->adapter_handle);
- if (!ACPI_SUCCESS(status))
- return 1;
-
- info->addr = sb->slave_address;
- lookup->speed = sb->connection_speed;
- if (sb->access_mode == ACPI_I2C_10BIT_MODE)
- info->flags |= I2C_CLIENT_TEN;
-
- return 1;
-}
-
-static int i2c_acpi_do_lookup(struct acpi_device *adev,
- struct i2c_acpi_lookup *lookup)
-{
- struct i2c_board_info *info = lookup->info;
- struct list_head resource_list;
- int ret;
-
- if (acpi_bus_get_status(adev) || !adev->status.present ||
- acpi_device_enumerated(adev))
- return -EINVAL;
-
- memset(info, 0, sizeof(*info));
- lookup->device_handle = acpi_device_handle(adev);
-
- /* Look up for I2cSerialBus resource */
- INIT_LIST_HEAD(&resource_list);
- ret = acpi_dev_get_resources(adev, &resource_list,
- i2c_acpi_fill_info, lookup);
- acpi_dev_free_resource_list(&resource_list);
-
- if (ret < 0 || !info->addr)
- return -EINVAL;
-
- return 0;
-}
-
-static int i2c_acpi_get_info(struct acpi_device *adev,
- struct i2c_board_info *info,
- struct i2c_adapter *adapter,
- acpi_handle *adapter_handle)
-{
- struct list_head resource_list;
- struct resource_entry *entry;
- struct i2c_acpi_lookup lookup;
- int ret;
-
- memset(&lookup, 0, sizeof(lookup));
- lookup.info = info;
- lookup.index = -1;
-
- ret = i2c_acpi_do_lookup(adev, &lookup);
- if (ret)
- return ret;
-
- if (adapter) {
- /* The adapter must match the one in I2cSerialBus() connector */
- if (ACPI_HANDLE(&adapter->dev) != lookup.adapter_handle)
- return -ENODEV;
- } else {
- struct acpi_device *adapter_adev;
-
- /* The adapter must be present */
- if (acpi_bus_get_device(lookup.adapter_handle, &adapter_adev))
- return -ENODEV;
- if (acpi_bus_get_status(adapter_adev) ||
- !adapter_adev->status.present)
- return -ENODEV;
- }
-
- info->fwnode = acpi_fwnode_handle(adev);
- if (adapter_handle)
- *adapter_handle = lookup.adapter_handle;
-
- /* Then fill IRQ number if any */
- INIT_LIST_HEAD(&resource_list);
- ret = acpi_dev_get_resources(adev, &resource_list, NULL, NULL);
- if (ret < 0)
- return -EINVAL;
-
- resource_list_for_each_entry(entry, &resource_list) {
- if (resource_type(entry->res) == IORESOURCE_IRQ) {
- info->irq = entry->res->start;
- break;
- }
- }
-
- acpi_dev_free_resource_list(&resource_list);
-
- acpi_set_modalias(adev, dev_name(&adev->dev), info->type,
- sizeof(info->type));
-
- return 0;
-}
-
-static void i2c_acpi_register_device(struct i2c_adapter *adapter,
- struct acpi_device *adev,
- struct i2c_board_info *info)
-{
- adev->power.flags.ignore_parent = true;
- acpi_device_set_enumerated(adev);
-
- if (!i2c_new_device(adapter, info)) {
- adev->power.flags.ignore_parent = false;
- dev_err(&adapter->dev,
- "failed to add I2C device %s from ACPI\n",
- dev_name(&adev->dev));
- }
-}
-
-static acpi_status i2c_acpi_add_device(acpi_handle handle, u32 level,
- void *data, void **return_value)
-{
- struct i2c_adapter *adapter = data;
- struct acpi_device *adev;
- struct i2c_board_info info;
-
- if (acpi_bus_get_device(handle, &adev))
- return AE_OK;
-
- if (i2c_acpi_get_info(adev, &info, adapter, NULL))
- return AE_OK;
-
- i2c_acpi_register_device(adapter, adev, &info);
-
- return AE_OK;
-}
-
-#define I2C_ACPI_MAX_SCAN_DEPTH 32
-
-/**
- * i2c_acpi_register_devices - enumerate I2C slave devices behind adapter
- * @adap: pointer to adapter
- *
- * Enumerate all I2C slave devices behind this adapter by walking the ACPI
- * namespace. When a device is found it will be added to the Linux device
- * model and bound to the corresponding ACPI handle.
- */
-static void i2c_acpi_register_devices(struct i2c_adapter *adap)
-{
- acpi_status status;
-
- if (!has_acpi_companion(&adap->dev))
- return;
-
- status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
- I2C_ACPI_MAX_SCAN_DEPTH,
- i2c_acpi_add_device, NULL,
- adap, NULL);
- if (ACPI_FAILURE(status))
- dev_warn(&adap->dev, "failed to enumerate I2C slaves\n");
-}
-
-static acpi_status i2c_acpi_lookup_speed(acpi_handle handle, u32 level,
- void *data, void **return_value)
-{
- struct i2c_acpi_lookup *lookup = data;
- struct acpi_device *adev;
-
- if (acpi_bus_get_device(handle, &adev))
- return AE_OK;
-
- if (i2c_acpi_do_lookup(adev, lookup))
- return AE_OK;
-
- if (lookup->search_handle != lookup->adapter_handle)
- return AE_OK;
-
- if (lookup->speed <= lookup->min_speed)
- lookup->min_speed = lookup->speed;
-
- return AE_OK;
-}
-
-/**
- * i2c_acpi_find_bus_speed - find I2C bus speed from ACPI
- * @dev: The device owning the bus
- *
- * Find the I2C bus speed by walking the ACPI namespace for all I2C slaves
- * devices connected to this bus and use the speed of slowest device.
- *
- * Returns the speed in Hz or zero
- */
-u32 i2c_acpi_find_bus_speed(struct device *dev)
-{
- struct i2c_acpi_lookup lookup;
- struct i2c_board_info dummy;
- acpi_status status;
-
- if (!has_acpi_companion(dev))
- return 0;
-
- memset(&lookup, 0, sizeof(lookup));
- lookup.search_handle = ACPI_HANDLE(dev);
- lookup.min_speed = UINT_MAX;
- lookup.info = &dummy;
- lookup.index = -1;
-
- status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
- I2C_ACPI_MAX_SCAN_DEPTH,
- i2c_acpi_lookup_speed, NULL,
- &lookup, NULL);
-
- if (ACPI_FAILURE(status)) {
- dev_warn(dev, "unable to find I2C bus speed from ACPI\n");
- return 0;
- }
-
- return lookup.min_speed != UINT_MAX ? lookup.min_speed : 0;
-}
-EXPORT_SYMBOL_GPL(i2c_acpi_find_bus_speed);
-
-static int i2c_acpi_match_adapter(struct device *dev, void *data)
-{
- struct i2c_adapter *adapter = i2c_verify_adapter(dev);
-
- if (!adapter)
- return 0;
-
- return ACPI_HANDLE(dev) == (acpi_handle)data;
-}
-
-static int i2c_acpi_match_device(struct device *dev, void *data)
-{
- return ACPI_COMPANION(dev) == data;
-}
-
-static struct i2c_adapter *i2c_acpi_find_adapter_by_handle(acpi_handle handle)
-{
- struct device *dev;
-
- dev = bus_find_device(&i2c_bus_type, NULL, handle,
- i2c_acpi_match_adapter);
- return dev ? i2c_verify_adapter(dev) : NULL;
-}
-
-static struct i2c_client *i2c_acpi_find_client_by_adev(struct acpi_device *adev)
-{
- struct device *dev;
-
- dev = bus_find_device(&i2c_bus_type, NULL, adev, i2c_acpi_match_device);
- return dev ? i2c_verify_client(dev) : NULL;
-}
-
-static int i2c_acpi_notify(struct notifier_block *nb, unsigned long value,
- void *arg)
-{
- struct acpi_device *adev = arg;
- struct i2c_board_info info;
- acpi_handle adapter_handle;
- struct i2c_adapter *adapter;
- struct i2c_client *client;
-
- switch (value) {
- case ACPI_RECONFIG_DEVICE_ADD:
- if (i2c_acpi_get_info(adev, &info, NULL, &adapter_handle))
- break;
-
- adapter = i2c_acpi_find_adapter_by_handle(adapter_handle);
- if (!adapter)
- break;
-
- i2c_acpi_register_device(adapter, adev, &info);
- break;
- case ACPI_RECONFIG_DEVICE_REMOVE:
- if (!acpi_device_enumerated(adev))
- break;
-
- client = i2c_acpi_find_client_by_adev(adev);
- if (!client)
- break;
-
- i2c_unregister_device(client);
- put_device(&client->dev);
- break;
- }
-
- return NOTIFY_OK;
-}
-
-static struct notifier_block i2c_acpi_notifier = {
- .notifier_call = i2c_acpi_notify,
-};
-
-/**
- * i2c_acpi_new_device - Create i2c-client for the Nth I2cSerialBus resource
- * @dev: Device owning the ACPI resources to get the client from
- * @index: Index of ACPI resource to get
- * @info: describes the I2C device; note this is modified (addr gets set)
- * Context: can sleep
- *
- * By default the i2c subsys creates an i2c-client for the first I2cSerialBus
- * resource of an acpi_device, but some acpi_devices have multiple I2cSerialBus
- * resources, in that case this function can be used to create an i2c-client
- * for other I2cSerialBus resources in the Current Resource Settings table.
- *
- * Also see i2c_new_device, which this function calls to create the i2c-client.
- *
- * Returns a pointer to the new i2c-client, or NULL if the adapter is not found.
- */
-struct i2c_client *i2c_acpi_new_device(struct device *dev, int index,
- struct i2c_board_info *info)
-{
- struct i2c_acpi_lookup lookup;
- struct i2c_adapter *adapter;
- struct acpi_device *adev;
- LIST_HEAD(resource_list);
- int ret;
-
- adev = ACPI_COMPANION(dev);
- if (!adev)
- return NULL;
-
- memset(&lookup, 0, sizeof(lookup));
- lookup.info = info;
- lookup.device_handle = acpi_device_handle(adev);
- lookup.index = index;
-
- ret = acpi_dev_get_resources(adev, &resource_list,
- i2c_acpi_fill_info, &lookup);
- acpi_dev_free_resource_list(&resource_list);
-
- if (ret < 0 || !info->addr)
- return NULL;
-
- adapter = i2c_acpi_find_adapter_by_handle(lookup.adapter_handle);
- if (!adapter)
- return NULL;
-
- return i2c_new_device(adapter, info);
-}
-EXPORT_SYMBOL_GPL(i2c_acpi_new_device);
-#else /* CONFIG_ACPI */
-static inline void i2c_acpi_register_devices(struct i2c_adapter *adap) { }
-extern struct notifier_block i2c_acpi_notifier;
-#endif /* CONFIG_ACPI */
-
-#ifdef CONFIG_ACPI_I2C_OPREGION
-static int acpi_gsb_i2c_read_bytes(struct i2c_client *client,
- u8 cmd, u8 *data, u8 data_len)
-{
-
- struct i2c_msg msgs[2];
- int ret;
- u8 *buffer;
-
- buffer = kzalloc(data_len, GFP_KERNEL);
- if (!buffer)
- return AE_NO_MEMORY;
-
- msgs[0].addr = client->addr;
- msgs[0].flags = client->flags;
- msgs[0].len = 1;
- msgs[0].buf = &cmd;
-
- msgs[1].addr = client->addr;
- msgs[1].flags = client->flags | I2C_M_RD;
- msgs[1].len = data_len;
- msgs[1].buf = buffer;
-
- ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
- if (ret < 0)
- dev_err(&client->adapter->dev, "i2c read failed\n");
- else
- memcpy(data, buffer, data_len);
-
- kfree(buffer);
- return ret;
-}
-
-static int acpi_gsb_i2c_write_bytes(struct i2c_client *client,
- u8 cmd, u8 *data, u8 data_len)
-{
-
- struct i2c_msg msgs[1];
- u8 *buffer;
- int ret = AE_OK;
-
- buffer = kzalloc(data_len + 1, GFP_KERNEL);
- if (!buffer)
- return AE_NO_MEMORY;
-
- buffer[0] = cmd;
- memcpy(buffer + 1, data, data_len);
-
- msgs[0].addr = client->addr;
- msgs[0].flags = client->flags;
- msgs[0].len = data_len + 1;
- msgs[0].buf = buffer;
-
- ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
- if (ret < 0)
- dev_err(&client->adapter->dev, "i2c write failed\n");
-
- kfree(buffer);
- return ret;
-}
-
-static acpi_status
-i2c_acpi_space_handler(u32 function, acpi_physical_address command,
- u32 bits, u64 *value64,
- void *handler_context, void *region_context)
-{
- struct gsb_buffer *gsb = (struct gsb_buffer *)value64;
- struct i2c_acpi_handler_data *data = handler_context;
- struct acpi_connection_info *info = &data->info;
- struct acpi_resource_i2c_serialbus *sb;
- struct i2c_adapter *adapter = data->adapter;
- struct i2c_client *client;
- struct acpi_resource *ares;
- u32 accessor_type = function >> 16;
- u8 action = function & ACPI_IO_MASK;
- acpi_status ret;
- int status;
-
- ret = acpi_buffer_to_resource(info->connection, info->length, &ares);
- if (ACPI_FAILURE(ret))
- return ret;
-
- client = kzalloc(sizeof(*client), GFP_KERNEL);
- if (!client) {
- ret = AE_NO_MEMORY;
- goto err;
- }
-
- if (!value64 || ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS) {
- ret = AE_BAD_PARAMETER;
- goto err;
- }
-
- sb = &ares->data.i2c_serial_bus;
- if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C) {
- ret = AE_BAD_PARAMETER;
- goto err;
- }
-
- client->adapter = adapter;
- client->addr = sb->slave_address;
-
- if (sb->access_mode == ACPI_I2C_10BIT_MODE)
- client->flags |= I2C_CLIENT_TEN;
-
- switch (accessor_type) {
- case ACPI_GSB_ACCESS_ATTRIB_SEND_RCV:
- if (action == ACPI_READ) {
- status = i2c_smbus_read_byte(client);
- if (status >= 0) {
- gsb->bdata = status;
- status = 0;
- }
- } else {
- status = i2c_smbus_write_byte(client, gsb->bdata);
- }
- break;
-
- case ACPI_GSB_ACCESS_ATTRIB_BYTE:
- if (action == ACPI_READ) {
- status = i2c_smbus_read_byte_data(client, command);
- if (status >= 0) {
- gsb->bdata = status;
- status = 0;
- }
- } else {
- status = i2c_smbus_write_byte_data(client, command,
- gsb->bdata);
- }
- break;
-
- case ACPI_GSB_ACCESS_ATTRIB_WORD:
- if (action == ACPI_READ) {
- status = i2c_smbus_read_word_data(client, command);
- if (status >= 0) {
- gsb->wdata = status;
- status = 0;
- }
- } else {
- status = i2c_smbus_write_word_data(client, command,
- gsb->wdata);
- }
- break;
-
- case ACPI_GSB_ACCESS_ATTRIB_BLOCK:
- if (action == ACPI_READ) {
- status = i2c_smbus_read_block_data(client, command,
- gsb->data);
- if (status >= 0) {
- gsb->len = status;
- status = 0;
- }
- } else {
- status = i2c_smbus_write_block_data(client, command,
- gsb->len, gsb->data);
- }
- break;
-
- case ACPI_GSB_ACCESS_ATTRIB_MULTIBYTE:
- if (action == ACPI_READ) {
- status = acpi_gsb_i2c_read_bytes(client, command,
- gsb->data, info->access_length);
- if (status > 0)
- status = 0;
- } else {
- status = acpi_gsb_i2c_write_bytes(client, command,
- gsb->data, info->access_length);
- }
- break;
-
- default:
- dev_warn(&adapter->dev, "protocol 0x%02x not supported for client 0x%02x\n",
- accessor_type, client->addr);
- ret = AE_BAD_PARAMETER;
- goto err;
- }
-
- gsb->status = status;
-
- err:
- kfree(client);
- ACPI_FREE(ares);
- return ret;
-}
-
-
-static int i2c_acpi_install_space_handler(struct i2c_adapter *adapter)
-{
- acpi_handle handle;
- struct i2c_acpi_handler_data *data;
- acpi_status status;
-
- if (!adapter->dev.parent)
- return -ENODEV;
-
- handle = ACPI_HANDLE(adapter->dev.parent);
-
- if (!handle)
- return -ENODEV;
-
- data = kzalloc(sizeof(struct i2c_acpi_handler_data),
- GFP_KERNEL);
- if (!data)
- return -ENOMEM;
-
- data->adapter = adapter;
- status = acpi_bus_attach_private_data(handle, (void *)data);
- if (ACPI_FAILURE(status)) {
- kfree(data);
- return -ENOMEM;
- }
-
- status = acpi_install_address_space_handler(handle,
- ACPI_ADR_SPACE_GSBUS,
- &i2c_acpi_space_handler,
- NULL,
- data);
- if (ACPI_FAILURE(status)) {
- dev_err(&adapter->dev, "Error installing i2c space handler\n");
- acpi_bus_detach_private_data(handle);
- kfree(data);
- return -ENOMEM;
- }
-
- acpi_walk_dep_device_list(handle);
- return 0;
-}
-
-static void i2c_acpi_remove_space_handler(struct i2c_adapter *adapter)
-{
- acpi_handle handle;
- struct i2c_acpi_handler_data *data;
- acpi_status status;
-
- if (!adapter->dev.parent)
- return;
-
- handle = ACPI_HANDLE(adapter->dev.parent);
-
- if (!handle)
- return;
-
- acpi_remove_address_space_handler(handle,
- ACPI_ADR_SPACE_GSBUS,
- &i2c_acpi_space_handler);
-
- status = acpi_bus_get_private_data(handle, (void **)&data);
- if (ACPI_SUCCESS(status))
- kfree(data);
-
- acpi_bus_detach_private_data(handle);
-}
-#else /* CONFIG_ACPI_I2C_OPREGION */
-static inline void i2c_acpi_remove_space_handler(struct i2c_adapter *adapter)
-{ }
-
-static inline int i2c_acpi_install_space_handler(struct i2c_adapter *adapter)
-{ return 0; }
-#endif /* CONFIG_ACPI_I2C_OPREGION */
-
-/* ------------------------------------------------------------------------- */
-
-const struct i2c_device_id *i2c_match_id(const struct i2c_device_id *id,
- const struct i2c_client *client)
-{
- if (!(id && client))
- return NULL;
-
- while (id->name[0]) {
- if (strcmp(client->name, id->name) == 0)
- return id;
- id++;
- }
- return NULL;
-}
-EXPORT_SYMBOL_GPL(i2c_match_id);
-
-static int i2c_device_match(struct device *dev, struct device_driver *drv)
-{
- struct i2c_client *client = i2c_verify_client(dev);
- struct i2c_driver *driver;
-
-
- /* Attempt an OF style match */
- if (i2c_of_match_device(drv->of_match_table, client))
- return 1;
-
- /* Then ACPI style match */
- if (acpi_driver_match_device(dev, drv))
- return 1;
-
- driver = to_i2c_driver(drv);
-
- /* Finally an I2C match */
- if (i2c_match_id(driver->id_table, client))
- return 1;
-
- return 0;
-}
-
-static int i2c_device_uevent(struct device *dev, struct kobj_uevent_env *env)
-{
- struct i2c_client *client = to_i2c_client(dev);
- int rc;
-
- rc = acpi_device_uevent_modalias(dev, env);
- if (rc != -ENODEV)
- return rc;
-
- return add_uevent_var(env, "MODALIAS=%s%s", I2C_MODULE_PREFIX, client->name);
-}
-
-/* i2c bus recovery routines */
-static int get_scl_gpio_value(struct i2c_adapter *adap)
-{
- return gpio_get_value(adap->bus_recovery_info->scl_gpio);
-}
-
-static void set_scl_gpio_value(struct i2c_adapter *adap, int val)
-{
- gpio_set_value(adap->bus_recovery_info->scl_gpio, val);
-}
-
-static int get_sda_gpio_value(struct i2c_adapter *adap)
-{
- return gpio_get_value(adap->bus_recovery_info->sda_gpio);
-}
-
-static int i2c_get_gpios_for_recovery(struct i2c_adapter *adap)
-{
- struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
- struct device *dev = &adap->dev;
- int ret = 0;
-
- ret = gpio_request_one(bri->scl_gpio, GPIOF_OPEN_DRAIN |
- GPIOF_OUT_INIT_HIGH, "i2c-scl");
- if (ret) {
- dev_warn(dev, "Can't get SCL gpio: %d\n", bri->scl_gpio);
- return ret;
- }
-
- if (bri->get_sda) {
- if (gpio_request_one(bri->sda_gpio, GPIOF_IN, "i2c-sda")) {
- /* work without SDA polling */
- dev_warn(dev, "Can't get SDA gpio: %d. Not using SDA polling\n",
- bri->sda_gpio);
- bri->get_sda = NULL;
- }
- }
-
- return ret;
-}
-
-static void i2c_put_gpios_for_recovery(struct i2c_adapter *adap)
-{
- struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
-
- if (bri->get_sda)
- gpio_free(bri->sda_gpio);
-
- gpio_free(bri->scl_gpio);
-}
-
-/*
- * We are generating clock pulses. ndelay() determines durating of clk pulses.
- * We will generate clock with rate 100 KHz and so duration of both clock levels
- * is: delay in ns = (10^6 / 100) / 2
- */
-#define RECOVERY_NDELAY 5000
-#define RECOVERY_CLK_CNT 9
-
-static int i2c_generic_recovery(struct i2c_adapter *adap)
-{
- struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
- int i = 0, val = 1, ret = 0;
-
- if (bri->prepare_recovery)
- bri->prepare_recovery(adap);
-
- bri->set_scl(adap, val);
- ndelay(RECOVERY_NDELAY);
-
- /*
- * By this time SCL is high, as we need to give 9 falling-rising edges
- */
- while (i++ < RECOVERY_CLK_CNT * 2) {
- if (val) {
- /* Break if SDA is high */
- if (bri->get_sda && bri->get_sda(adap))
- break;
- /* SCL shouldn't be low here */
- if (!bri->get_scl(adap)) {
- dev_err(&adap->dev,
- "SCL is stuck low, exit recovery\n");
- ret = -EBUSY;
- break;
- }
- }
-
- val = !val;
- bri->set_scl(adap, val);
- ndelay(RECOVERY_NDELAY);
- }
-
- if (bri->unprepare_recovery)
- bri->unprepare_recovery(adap);
-
- return ret;
-}
-
-int i2c_generic_scl_recovery(struct i2c_adapter *adap)
-{
- return i2c_generic_recovery(adap);
-}
-EXPORT_SYMBOL_GPL(i2c_generic_scl_recovery);
-
-int i2c_generic_gpio_recovery(struct i2c_adapter *adap)
-{
- int ret;
-
- ret = i2c_get_gpios_for_recovery(adap);
- if (ret)
- return ret;
-
- ret = i2c_generic_recovery(adap);
- i2c_put_gpios_for_recovery(adap);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(i2c_generic_gpio_recovery);
-
-int i2c_recover_bus(struct i2c_adapter *adap)
-{
- if (!adap->bus_recovery_info)
- return -EOPNOTSUPP;
-
- dev_dbg(&adap->dev, "Trying i2c bus recovery\n");
- return adap->bus_recovery_info->recover_bus(adap);
-}
-EXPORT_SYMBOL_GPL(i2c_recover_bus);
-
-static void i2c_init_recovery(struct i2c_adapter *adap)
-{
- struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
- char *err_str;
-
- if (!bri)
- return;
-
- if (!bri->recover_bus) {
- err_str = "no recover_bus() found";
- goto err;
- }
-
- /* Generic GPIO recovery */
- if (bri->recover_bus == i2c_generic_gpio_recovery) {
- if (!gpio_is_valid(bri->scl_gpio)) {
- err_str = "invalid SCL gpio";
- goto err;
- }
-
- if (gpio_is_valid(bri->sda_gpio))
- bri->get_sda = get_sda_gpio_value;
- else
- bri->get_sda = NULL;
-
- bri->get_scl = get_scl_gpio_value;
- bri->set_scl = set_scl_gpio_value;
- } else if (bri->recover_bus == i2c_generic_scl_recovery) {
- /* Generic SCL recovery */
- if (!bri->set_scl || !bri->get_scl) {
- err_str = "no {get|set}_scl() found";
- goto err;
- }
- }
-
- return;
- err:
- dev_err(&adap->dev, "Not using recovery: %s\n", err_str);
- adap->bus_recovery_info = NULL;
-}
-
-static int i2c_smbus_host_notify_to_irq(const struct i2c_client *client)
-{
- struct i2c_adapter *adap = client->adapter;
- unsigned int irq;
-
- if (!adap->host_notify_domain)
- return -ENXIO;
-
- if (client->flags & I2C_CLIENT_TEN)
- return -EINVAL;
-
- irq = irq_find_mapping(adap->host_notify_domain, client->addr);
- if (!irq)
- irq = irq_create_mapping(adap->host_notify_domain,
- client->addr);
-
- return irq > 0 ? irq : -ENXIO;
-}
-
-static int i2c_device_probe(struct device *dev)
-{
- struct i2c_client *client = i2c_verify_client(dev);
- struct i2c_driver *driver;
- int status;
-
- if (!client)
- return 0;
-
- driver = to_i2c_driver(dev->driver);
-
- if (!client->irq && !driver->disable_i2c_core_irq_mapping) {
- int irq = -ENOENT;
-
- if (client->flags & I2C_CLIENT_HOST_NOTIFY) {
- dev_dbg(dev, "Using Host Notify IRQ\n");
- irq = i2c_smbus_host_notify_to_irq(client);
- } else if (dev->of_node) {
- irq = of_irq_get_byname(dev->of_node, "irq");
- if (irq == -EINVAL || irq == -ENODATA)
- irq = of_irq_get(dev->of_node, 0);
- } else if (ACPI_COMPANION(dev)) {
- irq = acpi_dev_gpio_irq_get(ACPI_COMPANION(dev), 0);
- }
- if (irq == -EPROBE_DEFER)
- return irq;
-
- if (irq < 0)
- irq = 0;
-
- client->irq = irq;
- }
-
- /*
- * An I2C ID table is not mandatory, if and only if, a suitable Device
- * Tree match table entry is supplied for the probing device.
- */
- if (!driver->id_table &&
- !i2c_of_match_device(dev->driver->of_match_table, client))
- return -ENODEV;
-
- if (client->flags & I2C_CLIENT_WAKE) {
- int wakeirq = -ENOENT;
-
- if (dev->of_node) {
- wakeirq = of_irq_get_byname(dev->of_node, "wakeup");
- if (wakeirq == -EPROBE_DEFER)
- return wakeirq;
- }
-
- device_init_wakeup(&client->dev, true);
-
- if (wakeirq > 0 && wakeirq != client->irq)
- status = dev_pm_set_dedicated_wake_irq(dev, wakeirq);
- else if (client->irq > 0)
- status = dev_pm_set_wake_irq(dev, client->irq);
- else
- status = 0;
-
- if (status)
- dev_warn(&client->dev, "failed to set up wakeup irq\n");
- }
-
- dev_dbg(dev, "probe\n");
-
- status = of_clk_set_defaults(dev->of_node, false);
- if (status < 0)
- goto err_clear_wakeup_irq;
-
- status = dev_pm_domain_attach(&client->dev, true);
- if (status == -EPROBE_DEFER)
- goto err_clear_wakeup_irq;
-
- /*
- * When there are no more users of probe(),
- * rename probe_new to probe.
- */
- if (driver->probe_new)
- status = driver->probe_new(client);
- else if (driver->probe)
- status = driver->probe(client,
- i2c_match_id(driver->id_table, client));
- else
- status = -EINVAL;
-
- if (status)
- goto err_detach_pm_domain;
-
- return 0;
-
-err_detach_pm_domain:
- dev_pm_domain_detach(&client->dev, true);
-err_clear_wakeup_irq:
- dev_pm_clear_wake_irq(&client->dev);
- device_init_wakeup(&client->dev, false);
- return status;
-}
-
-static int i2c_device_remove(struct device *dev)
-{
- struct i2c_client *client = i2c_verify_client(dev);
- struct i2c_driver *driver;
- int status = 0;
-
- if (!client || !dev->driver)
- return 0;
-
- driver = to_i2c_driver(dev->driver);
- if (driver->remove) {
- dev_dbg(dev, "remove\n");
- status = driver->remove(client);
- }
-
- dev_pm_domain_detach(&client->dev, true);
-
- dev_pm_clear_wake_irq(&client->dev);
- device_init_wakeup(&client->dev, false);
-
- return status;
-}
-
-static void i2c_device_shutdown(struct device *dev)
-{
- struct i2c_client *client = i2c_verify_client(dev);
- struct i2c_driver *driver;
-
- if (!client || !dev->driver)
- return;
- driver = to_i2c_driver(dev->driver);
- if (driver->shutdown)
- driver->shutdown(client);
-}
-
-static void i2c_client_dev_release(struct device *dev)
-{
- kfree(to_i2c_client(dev));
-}
-
-static ssize_t
-show_name(struct device *dev, struct device_attribute *attr, char *buf)
-{
- return sprintf(buf, "%s\n", dev->type == &i2c_client_type ?
- to_i2c_client(dev)->name : to_i2c_adapter(dev)->name);
-}
-static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
-
-static ssize_t
-show_modalias(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct i2c_client *client = to_i2c_client(dev);
- int len;
-
- len = acpi_device_modalias(dev, buf, PAGE_SIZE -1);
- if (len != -ENODEV)
- return len;
-
- return sprintf(buf, "%s%s\n", I2C_MODULE_PREFIX, client->name);
-}
-static DEVICE_ATTR(modalias, S_IRUGO, show_modalias, NULL);
-
-static struct attribute *i2c_dev_attrs[] = {
- &dev_attr_name.attr,
- /* modalias helps coldplug: modprobe $(cat .../modalias) */
- &dev_attr_modalias.attr,
- NULL
-};
-ATTRIBUTE_GROUPS(i2c_dev);
-
-struct bus_type i2c_bus_type = {
- .name = "i2c",
- .match = i2c_device_match,
- .probe = i2c_device_probe,
- .remove = i2c_device_remove,
- .shutdown = i2c_device_shutdown,
-};
-EXPORT_SYMBOL_GPL(i2c_bus_type);
-
-struct device_type i2c_client_type = {
- .groups = i2c_dev_groups,
- .uevent = i2c_device_uevent,
- .release = i2c_client_dev_release,
-};
-EXPORT_SYMBOL_GPL(i2c_client_type);
-
-
-/**
- * i2c_verify_client - return parameter as i2c_client, or NULL
- * @dev: device, probably from some driver model iterator
- *
- * When traversing the driver model tree, perhaps using driver model
- * iterators like @device_for_each_child(), you can't assume very much
- * about the nodes you find. Use this function to avoid oopses caused
- * by wrongly treating some non-I2C device as an i2c_client.
- */
-struct i2c_client *i2c_verify_client(struct device *dev)
-{
- return (dev->type == &i2c_client_type)
- ? to_i2c_client(dev)
- : NULL;
-}
-EXPORT_SYMBOL(i2c_verify_client);
-
-
-/* Return a unique address which takes the flags of the client into account */
-static unsigned short i2c_encode_flags_to_addr(struct i2c_client *client)
-{
- unsigned short addr = client->addr;
-
- /* For some client flags, add an arbitrary offset to avoid collisions */
- if (client->flags & I2C_CLIENT_TEN)
- addr |= I2C_ADDR_OFFSET_TEN_BIT;
-
- if (client->flags & I2C_CLIENT_SLAVE)
- addr |= I2C_ADDR_OFFSET_SLAVE;
-
- return addr;
-}
-
-/* This is a permissive address validity check, I2C address map constraints
- * are purposely not enforced, except for the general call address. */
-static int i2c_check_addr_validity(unsigned addr, unsigned short flags)
-{
- if (flags & I2C_CLIENT_TEN) {
- /* 10-bit address, all values are valid */
- if (addr > 0x3ff)
- return -EINVAL;
- } else {
- /* 7-bit address, reject the general call address */
- if (addr == 0x00 || addr > 0x7f)
- return -EINVAL;
- }
- return 0;
-}
-
-/* And this is a strict address validity check, used when probing. If a
- * device uses a reserved address, then it shouldn't be probed. 7-bit
- * addressing is assumed, 10-bit address devices are rare and should be
- * explicitly enumerated. */
-static int i2c_check_7bit_addr_validity_strict(unsigned short addr)
-{
- /*
- * Reserved addresses per I2C specification:
- * 0x00 General call address / START byte
- * 0x01 CBUS address
- * 0x02 Reserved for different bus format
- * 0x03 Reserved for future purposes
- * 0x04-0x07 Hs-mode master code
- * 0x78-0x7b 10-bit slave addressing
- * 0x7c-0x7f Reserved for future purposes
- */
- if (addr < 0x08 || addr > 0x77)
- return -EINVAL;
- return 0;
-}
-
-static int __i2c_check_addr_busy(struct device *dev, void *addrp)
-{
- struct i2c_client *client = i2c_verify_client(dev);
- int addr = *(int *)addrp;
-
- if (client && i2c_encode_flags_to_addr(client) == addr)
- return -EBUSY;
- return 0;
-}
-
-/* walk up mux tree */
-static int i2c_check_mux_parents(struct i2c_adapter *adapter, int addr)
-{
- struct i2c_adapter *parent = i2c_parent_is_i2c_adapter(adapter);
- int result;
-
- result = device_for_each_child(&adapter->dev, &addr,
- __i2c_check_addr_busy);
-
- if (!result && parent)
- result = i2c_check_mux_parents(parent, addr);
-
- return result;
-}
-
-/* recurse down mux tree */
-static int i2c_check_mux_children(struct device *dev, void *addrp)
-{
- int result;
-
- if (dev->type == &i2c_adapter_type)
- result = device_for_each_child(dev, addrp,
- i2c_check_mux_children);
- else
- result = __i2c_check_addr_busy(dev, addrp);
-
- return result;
-}
-
-static int i2c_check_addr_busy(struct i2c_adapter *adapter, int addr)
-{
- struct i2c_adapter *parent = i2c_parent_is_i2c_adapter(adapter);
- int result = 0;
-
- if (parent)
- result = i2c_check_mux_parents(parent, addr);
-
- if (!result)
- result = device_for_each_child(&adapter->dev, &addr,
- i2c_check_mux_children);
-
- return result;
-}
-
-/**
- * i2c_adapter_lock_bus - Get exclusive access to an I2C bus segment
- * @adapter: Target I2C bus segment
- * @flags: I2C_LOCK_ROOT_ADAPTER locks the root i2c adapter, I2C_LOCK_SEGMENT
- * locks only this branch in the adapter tree
- */
-static void i2c_adapter_lock_bus(struct i2c_adapter *adapter,
- unsigned int flags)
-{
- rt_mutex_lock(&adapter->bus_lock);
-}
-
-/**
- * i2c_adapter_trylock_bus - Try to get exclusive access to an I2C bus segment
- * @adapter: Target I2C bus segment
- * @flags: I2C_LOCK_ROOT_ADAPTER trylocks the root i2c adapter, I2C_LOCK_SEGMENT
- * trylocks only this branch in the adapter tree
- */
-static int i2c_adapter_trylock_bus(struct i2c_adapter *adapter,
- unsigned int flags)
-{
- return rt_mutex_trylock(&adapter->bus_lock);
-}
-
-/**
- * i2c_adapter_unlock_bus - Release exclusive access to an I2C bus segment
- * @adapter: Target I2C bus segment
- * @flags: I2C_LOCK_ROOT_ADAPTER unlocks the root i2c adapter, I2C_LOCK_SEGMENT
- * unlocks only this branch in the adapter tree
- */
-static void i2c_adapter_unlock_bus(struct i2c_adapter *adapter,
- unsigned int flags)
-{
- rt_mutex_unlock(&adapter->bus_lock);
-}
-
-static void i2c_dev_set_name(struct i2c_adapter *adap,
- struct i2c_client *client)
-{
- struct acpi_device *adev = ACPI_COMPANION(&client->dev);
-
- if (adev) {
- dev_set_name(&client->dev, "i2c-%s", acpi_dev_name(adev));
- return;
- }
-
- dev_set_name(&client->dev, "%d-%04x", i2c_adapter_id(adap),
- i2c_encode_flags_to_addr(client));
-}
-
-static int i2c_dev_irq_from_resources(const struct resource *resources,
- unsigned int num_resources)
-{
- struct irq_data *irqd;
- int i;
-
- for (i = 0; i < num_resources; i++) {
- const struct resource *r = &resources[i];
-
- if (resource_type(r) != IORESOURCE_IRQ)
- continue;
-
- if (r->flags & IORESOURCE_BITS) {
- irqd = irq_get_irq_data(r->start);
- if (!irqd)
- break;
-
- irqd_set_trigger_type(irqd, r->flags & IORESOURCE_BITS);
- }
-
- return r->start;
- }
-
- return 0;
-}
-
-/**
- * i2c_new_device - instantiate an i2c device
- * @adap: the adapter managing the device
- * @info: describes one I2C device; bus_num is ignored
- * Context: can sleep
- *
- * Create an i2c device. Binding is handled through driver model
- * probe()/remove() methods. A driver may be bound to this device when we
- * return from this function, or any later moment (e.g. maybe hotplugging will
- * load the driver module). This call is not appropriate for use by mainboard
- * initialization logic, which usually runs during an arch_initcall() long
- * before any i2c_adapter could exist.
- *
- * This returns the new i2c client, which may be saved for later use with
- * i2c_unregister_device(); or NULL to indicate an error.
- */
-struct i2c_client *
-i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
-{
- struct i2c_client *client;
- int status;
-
- client = kzalloc(sizeof *client, GFP_KERNEL);
- if (!client)
- return NULL;
-
- client->adapter = adap;
-
- client->dev.platform_data = info->platform_data;
-
- if (info->archdata)
- client->dev.archdata = *info->archdata;
-
- client->flags = info->flags;
- client->addr = info->addr;
-
- client->irq = info->irq;
- if (!client->irq)
- client->irq = i2c_dev_irq_from_resources(info->resources,
- info->num_resources);
-
- strlcpy(client->name, info->type, sizeof(client->name));
-
- status = i2c_check_addr_validity(client->addr, client->flags);
- if (status) {
- dev_err(&adap->dev, "Invalid %d-bit I2C address 0x%02hx\n",
- client->flags & I2C_CLIENT_TEN ? 10 : 7, client->addr);
- goto out_err_silent;
- }
-
- /* Check for address business */
- status = i2c_check_addr_busy(adap, i2c_encode_flags_to_addr(client));
- if (status)
- goto out_err;
-
- client->dev.parent = &client->adapter->dev;
- client->dev.bus = &i2c_bus_type;
- client->dev.type = &i2c_client_type;
- client->dev.of_node = info->of_node;
- client->dev.fwnode = info->fwnode;
-
- i2c_dev_set_name(adap, client);
-
- if (info->properties) {
- status = device_add_properties(&client->dev, info->properties);
- if (status) {
- dev_err(&adap->dev,
- "Failed to add properties to client %s: %d\n",
- client->name, status);
- goto out_err;
- }
- }
-
- status = device_register(&client->dev);
- if (status)
- goto out_free_props;
-
- dev_dbg(&adap->dev, "client [%s] registered with bus id %s\n",
- client->name, dev_name(&client->dev));
-
- return client;
-
-out_free_props:
- if (info->properties)
- device_remove_properties(&client->dev);
-out_err:
- dev_err(&adap->dev,
- "Failed to register i2c client %s at 0x%02x (%d)\n",
- client->name, client->addr, status);
-out_err_silent:
- kfree(client);
- return NULL;
-}
-EXPORT_SYMBOL_GPL(i2c_new_device);
-
-
-/**
- * i2c_unregister_device - reverse effect of i2c_new_device()
- * @client: value returned from i2c_new_device()
- * Context: can sleep
- */
-void i2c_unregister_device(struct i2c_client *client)
-{
- if (client->dev.of_node)
- of_node_clear_flag(client->dev.of_node, OF_POPULATED);
- if (ACPI_COMPANION(&client->dev))
- acpi_device_clear_enumerated(ACPI_COMPANION(&client->dev));
- device_unregister(&client->dev);
-}
-EXPORT_SYMBOL_GPL(i2c_unregister_device);
-
-
-static const struct i2c_device_id dummy_id[] = {
- { "dummy", 0 },
- { },
-};
-
-static int dummy_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
-{
- return 0;
-}
-
-static int dummy_remove(struct i2c_client *client)
-{
- return 0;
-}
-
-static struct i2c_driver dummy_driver = {
- .driver.name = "dummy",
- .probe = dummy_probe,
- .remove = dummy_remove,
- .id_table = dummy_id,
-};
-
-/**
- * i2c_new_dummy - return a new i2c device bound to a dummy driver
- * @adapter: the adapter managing the device
- * @address: seven bit address to be used
- * Context: can sleep
- *
- * This returns an I2C client bound to the "dummy" driver, intended for use
- * with devices that consume multiple addresses. Examples of such chips
- * include various EEPROMS (like 24c04 and 24c08 models).
- *
- * These dummy devices have two main uses. First, most I2C and SMBus calls
- * except i2c_transfer() need a client handle; the dummy will be that handle.
- * And second, this prevents the specified address from being bound to a
- * different driver.
- *
- * This returns the new i2c client, which should be saved for later use with
- * i2c_unregister_device(); or NULL to indicate an error.
- */
-struct i2c_client *i2c_new_dummy(struct i2c_adapter *adapter, u16 address)
-{
- struct i2c_board_info info = {
- I2C_BOARD_INFO("dummy", address),
- };
-
- return i2c_new_device(adapter, &info);
-}
-EXPORT_SYMBOL_GPL(i2c_new_dummy);
-
-/**
- * i2c_new_secondary_device - Helper to get the instantiated secondary address
- * and create the associated device
- * @client: Handle to the primary client
- * @name: Handle to specify which secondary address to get
- * @default_addr: Used as a fallback if no secondary address was specified
- * Context: can sleep
- *
- * I2C clients can be composed of multiple I2C slaves bound together in a single
- * component. The I2C client driver then binds to the master I2C slave and needs
- * to create I2C dummy clients to communicate with all the other slaves.
- *
- * This function creates and returns an I2C dummy client whose I2C address is
- * retrieved from the platform firmware based on the given slave name. If no
- * address is specified by the firmware default_addr is used.
- *
- * On DT-based platforms the address is retrieved from the "reg" property entry
- * cell whose "reg-names" value matches the slave name.
- *
- * This returns the new i2c client, which should be saved for later use with
- * i2c_unregister_device(); or NULL to indicate an error.
- */
-struct i2c_client *i2c_new_secondary_device(struct i2c_client *client,
- const char *name,
- u16 default_addr)
-{
- struct device_node *np = client->dev.of_node;
- u32 addr = default_addr;
- int i;
-
- if (np) {
- i = of_property_match_string(np, "reg-names", name);
- if (i >= 0)
- of_property_read_u32_index(np, "reg", i, &addr);
- }
-
- dev_dbg(&client->adapter->dev, "Address for %s : 0x%x\n", name, addr);
- return i2c_new_dummy(client->adapter, addr);
-}
-EXPORT_SYMBOL_GPL(i2c_new_secondary_device);
-
-/* ------------------------------------------------------------------------- */
-
-/* I2C bus adapters -- one roots each I2C or SMBUS segment */
-
-static void i2c_adapter_dev_release(struct device *dev)
-{
- struct i2c_adapter *adap = to_i2c_adapter(dev);
- complete(&adap->dev_released);
-}
-
-unsigned int i2c_adapter_depth(struct i2c_adapter *adapter)
-{
- unsigned int depth = 0;
-
- while ((adapter = i2c_parent_is_i2c_adapter(adapter)))
- depth++;
-
- WARN_ONCE(depth >= MAX_LOCKDEP_SUBCLASSES,
- "adapter depth exceeds lockdep subclass limit\n");
-
- return depth;
-}
-EXPORT_SYMBOL_GPL(i2c_adapter_depth);
-
-/*
- * Let users instantiate I2C devices through sysfs. This can be used when
- * platform initialization code doesn't contain the proper data for
- * whatever reason. Also useful for drivers that do device detection and
- * detection fails, either because the device uses an unexpected address,
- * or this is a compatible device with different ID register values.
- *
- * Parameter checking may look overzealous, but we really don't want
- * the user to provide incorrect parameters.
- */
-static ssize_t
-i2c_sysfs_new_device(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct i2c_adapter *adap = to_i2c_adapter(dev);
- struct i2c_board_info info;
- struct i2c_client *client;
- char *blank, end;
- int res;
-
- memset(&info, 0, sizeof(struct i2c_board_info));
-
- blank = strchr(buf, ' ');
- if (!blank) {
- dev_err(dev, "%s: Missing parameters\n", "new_device");
- return -EINVAL;
- }
- if (blank - buf > I2C_NAME_SIZE - 1) {
- dev_err(dev, "%s: Invalid device name\n", "new_device");
- return -EINVAL;
- }
- memcpy(info.type, buf, blank - buf);
-
- /* Parse remaining parameters, reject extra parameters */
- res = sscanf(++blank, "%hi%c", &info.addr, &end);
- if (res < 1) {
- dev_err(dev, "%s: Can't parse I2C address\n", "new_device");
- return -EINVAL;
- }
- if (res > 1 && end != '\n') {
- dev_err(dev, "%s: Extra parameters\n", "new_device");
- return -EINVAL;
- }
-
- if ((info.addr & I2C_ADDR_OFFSET_TEN_BIT) == I2C_ADDR_OFFSET_TEN_BIT) {
- info.addr &= ~I2C_ADDR_OFFSET_TEN_BIT;
- info.flags |= I2C_CLIENT_TEN;
- }
-
- if (info.addr & I2C_ADDR_OFFSET_SLAVE) {
- info.addr &= ~I2C_ADDR_OFFSET_SLAVE;
- info.flags |= I2C_CLIENT_SLAVE;
- }
-
- client = i2c_new_device(adap, &info);
- if (!client)
- return -EINVAL;
-
- /* Keep track of the added device */
- mutex_lock(&adap->userspace_clients_lock);
- list_add_tail(&client->detected, &adap->userspace_clients);
- mutex_unlock(&adap->userspace_clients_lock);
- dev_info(dev, "%s: Instantiated device %s at 0x%02hx\n", "new_device",
- info.type, info.addr);
-
- return count;
-}
-static DEVICE_ATTR(new_device, S_IWUSR, NULL, i2c_sysfs_new_device);
-
-/*
- * And of course let the users delete the devices they instantiated, if
- * they got it wrong. This interface can only be used to delete devices
- * instantiated by i2c_sysfs_new_device above. This guarantees that we
- * don't delete devices to which some kernel code still has references.
- *
- * Parameter checking may look overzealous, but we really don't want
- * the user to delete the wrong device.
- */
-static ssize_t
-i2c_sysfs_delete_device(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct i2c_adapter *adap = to_i2c_adapter(dev);
- struct i2c_client *client, *next;
- unsigned short addr;
- char end;
- int res;
-
- /* Parse parameters, reject extra parameters */
- res = sscanf(buf, "%hi%c", &addr, &end);
- if (res < 1) {
- dev_err(dev, "%s: Can't parse I2C address\n", "delete_device");
- return -EINVAL;
- }
- if (res > 1 && end != '\n') {
- dev_err(dev, "%s: Extra parameters\n", "delete_device");
- return -EINVAL;
- }
-
- /* Make sure the device was added through sysfs */
- res = -ENOENT;
- mutex_lock_nested(&adap->userspace_clients_lock,
- i2c_adapter_depth(adap));
- list_for_each_entry_safe(client, next, &adap->userspace_clients,
- detected) {
- if (i2c_encode_flags_to_addr(client) == addr) {
- dev_info(dev, "%s: Deleting device %s at 0x%02hx\n",
- "delete_device", client->name, client->addr);
-
- list_del(&client->detected);
- i2c_unregister_device(client);
- res = count;
- break;
- }
- }
- mutex_unlock(&adap->userspace_clients_lock);
-
- if (res < 0)
- dev_err(dev, "%s: Can't find device in list\n",
- "delete_device");
- return res;
-}
-static DEVICE_ATTR_IGNORE_LOCKDEP(delete_device, S_IWUSR, NULL,
- i2c_sysfs_delete_device);
-
-static struct attribute *i2c_adapter_attrs[] = {
- &dev_attr_name.attr,
- &dev_attr_new_device.attr,
- &dev_attr_delete_device.attr,
- NULL
-};
-ATTRIBUTE_GROUPS(i2c_adapter);
-
-struct device_type i2c_adapter_type = {
- .groups = i2c_adapter_groups,
- .release = i2c_adapter_dev_release,
-};
-EXPORT_SYMBOL_GPL(i2c_adapter_type);
-
-/**
- * i2c_verify_adapter - return parameter as i2c_adapter or NULL
- * @dev: device, probably from some driver model iterator
- *
- * When traversing the driver model tree, perhaps using driver model
- * iterators like @device_for_each_child(), you can't assume very much
- * about the nodes you find. Use this function to avoid oopses caused
- * by wrongly treating some non-I2C device as an i2c_adapter.
- */
-struct i2c_adapter *i2c_verify_adapter(struct device *dev)
-{
- return (dev->type == &i2c_adapter_type)
- ? to_i2c_adapter(dev)
- : NULL;
-}
-EXPORT_SYMBOL(i2c_verify_adapter);
-
-#ifdef CONFIG_I2C_COMPAT
-static struct class_compat *i2c_adapter_compat_class;
-#endif
-
-static void i2c_scan_static_board_info(struct i2c_adapter *adapter)
-{
- struct i2c_devinfo *devinfo;
-
- down_read(&__i2c_board_lock);
- list_for_each_entry(devinfo, &__i2c_board_list, list) {
- if (devinfo->busnum == adapter->nr
- && !i2c_new_device(adapter,
- &devinfo->board_info))
- dev_err(&adapter->dev,
- "Can't create device at 0x%02x\n",
- devinfo->board_info.addr);
- }
- up_read(&__i2c_board_lock);
-}
-
-/* OF support code */
-
-#if IS_ENABLED(CONFIG_OF)
-static struct i2c_client *of_i2c_register_device(struct i2c_adapter *adap,
- struct device_node *node)
-{
- struct i2c_client *result;
- struct i2c_board_info info = {};
- struct dev_archdata dev_ad = {};
- const __be32 *addr_be;
- u32 addr;
- int len;
-
- dev_dbg(&adap->dev, "of_i2c: register %s\n", node->full_name);
-
- if (of_modalias_node(node, info.type, sizeof(info.type)) < 0) {
- dev_err(&adap->dev, "of_i2c: modalias failure on %s\n",
- node->full_name);
- return ERR_PTR(-EINVAL);
- }
-
- addr_be = of_get_property(node, "reg", &len);
- if (!addr_be || (len < sizeof(*addr_be))) {
- dev_err(&adap->dev, "of_i2c: invalid reg on %s\n",
- node->full_name);
- return ERR_PTR(-EINVAL);
- }
-
- addr = be32_to_cpup(addr_be);
- if (addr & I2C_TEN_BIT_ADDRESS) {
- addr &= ~I2C_TEN_BIT_ADDRESS;
- info.flags |= I2C_CLIENT_TEN;
- }
-
- if (addr & I2C_OWN_SLAVE_ADDRESS) {
- addr &= ~I2C_OWN_SLAVE_ADDRESS;
- info.flags |= I2C_CLIENT_SLAVE;
- }
-
- if (i2c_check_addr_validity(addr, info.flags)) {
- dev_err(&adap->dev, "of_i2c: invalid addr=%x on %s\n",
- addr, node->full_name);
- return ERR_PTR(-EINVAL);
- }
-
- info.addr = addr;
- info.of_node = of_node_get(node);
- info.archdata = &dev_ad;
-
- if (of_property_read_bool(node, "host-notify"))
- info.flags |= I2C_CLIENT_HOST_NOTIFY;
-
- if (of_get_property(node, "wakeup-source", NULL))
- info.flags |= I2C_CLIENT_WAKE;
-
- result = i2c_new_device(adap, &info);
- if (result == NULL) {
- dev_err(&adap->dev, "of_i2c: Failure registering %s\n",
- node->full_name);
- of_node_put(node);
- return ERR_PTR(-EINVAL);
- }
- return result;
-}
-
-static void of_i2c_register_devices(struct i2c_adapter *adap)
-{
- struct device_node *bus, *node;
- struct i2c_client *client;
-
- /* Only register child devices if the adapter has a node pointer set */
- if (!adap->dev.of_node)
- return;
-
- dev_dbg(&adap->dev, "of_i2c: walking child nodes\n");
-
- bus = of_get_child_by_name(adap->dev.of_node, "i2c-bus");
- if (!bus)
- bus = of_node_get(adap->dev.of_node);
-
- for_each_available_child_of_node(bus, node) {
- if (of_node_test_and_set_flag(node, OF_POPULATED))
- continue;
-
- client = of_i2c_register_device(adap, node);
- if (IS_ERR(client)) {
- dev_warn(&adap->dev,
- "Failed to create I2C device for %s\n",
- node->full_name);
- of_node_clear_flag(node, OF_POPULATED);
- }
- }
-
- of_node_put(bus);
-}
-
-static int of_dev_node_match(struct device *dev, void *data)
-{
- return dev->of_node == data;
-}
-
-/* must call put_device() when done with returned i2c_client device */
-struct i2c_client *of_find_i2c_device_by_node(struct device_node *node)
-{
- struct device *dev;
- struct i2c_client *client;
-
- dev = bus_find_device(&i2c_bus_type, NULL, node, of_dev_node_match);
- if (!dev)
- return NULL;
-
- client = i2c_verify_client(dev);
- if (!client)
- put_device(dev);
-
- return client;
-}
-EXPORT_SYMBOL(of_find_i2c_device_by_node);
-
-/* must call put_device() when done with returned i2c_adapter device */
-struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node *node)
-{
- struct device *dev;
- struct i2c_adapter *adapter;
-
- dev = bus_find_device(&i2c_bus_type, NULL, node, of_dev_node_match);
- if (!dev)
- return NULL;
-
- adapter = i2c_verify_adapter(dev);
- if (!adapter)
- put_device(dev);
-
- return adapter;
-}
-EXPORT_SYMBOL(of_find_i2c_adapter_by_node);
-
-/* must call i2c_put_adapter() when done with returned i2c_adapter device */
-struct i2c_adapter *of_get_i2c_adapter_by_node(struct device_node *node)
-{
- struct i2c_adapter *adapter;
-
- adapter = of_find_i2c_adapter_by_node(node);
- if (!adapter)
- return NULL;
-
- if (!try_module_get(adapter->owner)) {
- put_device(&adapter->dev);
- adapter = NULL;
- }
-
- return adapter;
-}
-EXPORT_SYMBOL(of_get_i2c_adapter_by_node);
-
-static const struct of_device_id*
-i2c_of_match_device_sysfs(const struct of_device_id *matches,
- struct i2c_client *client)
-{
- const char *name;
-
- for (; matches->compatible[0]; matches++) {
- /*
- * Adding devices through the i2c sysfs interface provides us
- * a string to match which may be compatible with the device
- * tree compatible strings, however with no actual of_node the
- * of_match_device() will not match
- */
- if (sysfs_streq(client->name, matches->compatible))
- return matches;
-
- name = strchr(matches->compatible, ',');
- if (!name)
- name = matches->compatible;
- else
- name++;
-
- if (sysfs_streq(client->name, name))
- return matches;
- }
-
- return NULL;
-}
-
-const struct of_device_id
-*i2c_of_match_device(const struct of_device_id *matches,
- struct i2c_client *client)
-{
- const struct of_device_id *match;
-
- if (!(client && matches))
- return NULL;
-
- match = of_match_device(matches, &client->dev);
- if (match)
- return match;
-
- return i2c_of_match_device_sysfs(matches, client);
-}
-EXPORT_SYMBOL_GPL(i2c_of_match_device);
-#else
-static void of_i2c_register_devices(struct i2c_adapter *adap) { }
-#endif /* CONFIG_OF */
-
-static int i2c_do_add_adapter(struct i2c_driver *driver,
- struct i2c_adapter *adap)
-{
- /* Detect supported devices on that bus, and instantiate them */
- i2c_detect(adap, driver);
-
- /* Let legacy drivers scan this bus for matching devices */
- if (driver->attach_adapter) {
- dev_warn(&adap->dev, "%s: attach_adapter method is deprecated\n",
- driver->driver.name);
- dev_warn(&adap->dev,
- "Please use another way to instantiate your i2c_client\n");
- /* We ignore the return code; if it fails, too bad */
- driver->attach_adapter(adap);
- }
- return 0;
-}
-
-static int __process_new_adapter(struct device_driver *d, void *data)
-{
- return i2c_do_add_adapter(to_i2c_driver(d), data);
-}
-
-static const struct i2c_lock_operations i2c_adapter_lock_ops = {
- .lock_bus = i2c_adapter_lock_bus,
- .trylock_bus = i2c_adapter_trylock_bus,
- .unlock_bus = i2c_adapter_unlock_bus,
-};
-
-static void i2c_host_notify_irq_teardown(struct i2c_adapter *adap)
-{
- struct irq_domain *domain = adap->host_notify_domain;
- irq_hw_number_t hwirq;
-
- if (!domain)
- return;
-
- for (hwirq = 0 ; hwirq < I2C_ADDR_7BITS_COUNT ; hwirq++)
- irq_dispose_mapping(irq_find_mapping(domain, hwirq));
-
- irq_domain_remove(domain);
- adap->host_notify_domain = NULL;
-}
-
-static int i2c_host_notify_irq_map(struct irq_domain *h,
- unsigned int virq,
- irq_hw_number_t hw_irq_num)
-{
- irq_set_chip_and_handler(virq, &dummy_irq_chip, handle_simple_irq);
-
- return 0;
-}
-
-static const struct irq_domain_ops i2c_host_notify_irq_ops = {
- .map = i2c_host_notify_irq_map,
-};
-
-static int i2c_setup_host_notify_irq_domain(struct i2c_adapter *adap)
-{
- struct irq_domain *domain;
-
- if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_HOST_NOTIFY))
- return 0;
-
- domain = irq_domain_create_linear(adap->dev.fwnode,
- I2C_ADDR_7BITS_COUNT,
- &i2c_host_notify_irq_ops, adap);
- if (!domain)
- return -ENOMEM;
-
- adap->host_notify_domain = domain;
-
- return 0;
-}
-
-/**
- * i2c_handle_smbus_host_notify - Forward a Host Notify event to the correct
- * I2C client.
- * @adap: the adapter
- * @addr: the I2C address of the notifying device
- * Context: can't sleep
- *
- * Helper function to be called from an I2C bus driver's interrupt
- * handler. It will schedule the Host Notify IRQ.
- */
-int i2c_handle_smbus_host_notify(struct i2c_adapter *adap, unsigned short addr)
-{
- int irq;
-
- if (!adap)
- return -EINVAL;
-
- irq = irq_find_mapping(adap->host_notify_domain, addr);
- if (irq <= 0)
- return -ENXIO;
-
- generic_handle_irq(irq);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(i2c_handle_smbus_host_notify);
-
-static int i2c_register_adapter(struct i2c_adapter *adap)
-{
- int res = -EINVAL;
-
- /* Can't register until after driver model init */
- if (WARN_ON(!is_registered)) {
- res = -EAGAIN;
- goto out_list;
- }
-
- /* Sanity checks */
- if (WARN(!adap->name[0], "i2c adapter has no name"))
- goto out_list;
-
- if (!adap->algo) {
- pr_err("adapter '%s': no algo supplied!\n", adap->name);
- goto out_list;
- }
-
- if (!adap->lock_ops)
- adap->lock_ops = &i2c_adapter_lock_ops;
-
- rt_mutex_init(&adap->bus_lock);
- rt_mutex_init(&adap->mux_lock);
- mutex_init(&adap->userspace_clients_lock);
- INIT_LIST_HEAD(&adap->userspace_clients);
-
- /* Set default timeout to 1 second if not already set */
- if (adap->timeout == 0)
- adap->timeout = HZ;
-
- /* register soft irqs for Host Notify */
- res = i2c_setup_host_notify_irq_domain(adap);
- if (res) {
- pr_err("adapter '%s': can't create Host Notify IRQs (%d)\n",
- adap->name, res);
- goto out_list;
- }
-
- dev_set_name(&adap->dev, "i2c-%d", adap->nr);
- adap->dev.bus = &i2c_bus_type;
- adap->dev.type = &i2c_adapter_type;
- res = device_register(&adap->dev);
- if (res) {
- pr_err("adapter '%s': can't register device (%d)\n", adap->name, res);
- goto out_list;
- }
-
- dev_dbg(&adap->dev, "adapter [%s] registered\n", adap->name);
-
- pm_runtime_no_callbacks(&adap->dev);
- pm_suspend_ignore_children(&adap->dev, true);
- pm_runtime_enable(&adap->dev);
-
-#ifdef CONFIG_I2C_COMPAT
- res = class_compat_create_link(i2c_adapter_compat_class, &adap->dev,
- adap->dev.parent);
- if (res)
- dev_warn(&adap->dev,
- "Failed to create compatibility class link\n");
-#endif
-
- i2c_init_recovery(adap);
-
- /* create pre-declared device nodes */
- of_i2c_register_devices(adap);
- i2c_acpi_register_devices(adap);
- i2c_acpi_install_space_handler(adap);
-
- if (adap->nr < __i2c_first_dynamic_bus_num)
- i2c_scan_static_board_info(adap);
-
- /* Notify drivers */
- mutex_lock(&core_lock);
- bus_for_each_drv(&i2c_bus_type, NULL, adap, __process_new_adapter);
- mutex_unlock(&core_lock);
-
- return 0;
-
-out_list:
- mutex_lock(&core_lock);
- idr_remove(&i2c_adapter_idr, adap->nr);
- mutex_unlock(&core_lock);
- return res;
-}
-
-/**
- * __i2c_add_numbered_adapter - i2c_add_numbered_adapter where nr is never -1
- * @adap: the adapter to register (with adap->nr initialized)
- * Context: can sleep
- *
- * See i2c_add_numbered_adapter() for details.
- */
-static int __i2c_add_numbered_adapter(struct i2c_adapter *adap)
-{
- int id;
-
- mutex_lock(&core_lock);
- id = idr_alloc(&i2c_adapter_idr, adap, adap->nr, adap->nr + 1, GFP_KERNEL);
- mutex_unlock(&core_lock);
- if (WARN(id < 0, "couldn't get idr"))
- return id == -ENOSPC ? -EBUSY : id;
-
- return i2c_register_adapter(adap);
-}
-
-/**
- * i2c_add_adapter - declare i2c adapter, use dynamic bus number
- * @adapter: the adapter to add
- * Context: can sleep
- *
- * This routine is used to declare an I2C adapter when its bus number
- * doesn't matter or when its bus number is specified by an dt alias.
- * Examples of bases when the bus number doesn't matter: I2C adapters
- * dynamically added by USB links or PCI plugin cards.
- *
- * When this returns zero, a new bus number was allocated and stored
- * in adap->nr, and the specified adapter became available for clients.
- * Otherwise, a negative errno value is returned.
- */
-int i2c_add_adapter(struct i2c_adapter *adapter)
-{
- struct device *dev = &adapter->dev;
- int id;
-
- if (dev->of_node) {
- id = of_alias_get_id(dev->of_node, "i2c");
- if (id >= 0) {
- adapter->nr = id;
- return __i2c_add_numbered_adapter(adapter);
- }
- }
-
- mutex_lock(&core_lock);
- id = idr_alloc(&i2c_adapter_idr, adapter,
- __i2c_first_dynamic_bus_num, 0, GFP_KERNEL);
- mutex_unlock(&core_lock);
- if (WARN(id < 0, "couldn't get idr"))
- return id;
-
- adapter->nr = id;
-
- return i2c_register_adapter(adapter);
-}
-EXPORT_SYMBOL(i2c_add_adapter);
-
-/**
- * i2c_add_numbered_adapter - declare i2c adapter, use static bus number
- * @adap: the adapter to register (with adap->nr initialized)
- * Context: can sleep
- *
- * This routine is used to declare an I2C adapter when its bus number
- * matters. For example, use it for I2C adapters from system-on-chip CPUs,
- * or otherwise built in to the system's mainboard, and where i2c_board_info
- * is used to properly configure I2C devices.
- *
- * If the requested bus number is set to -1, then this function will behave
- * identically to i2c_add_adapter, and will dynamically assign a bus number.
- *
- * If no devices have pre-been declared for this bus, then be sure to
- * register the adapter before any dynamically allocated ones. Otherwise
- * the required bus ID may not be available.
- *
- * When this returns zero, the specified adapter became available for
- * clients using the bus number provided in adap->nr. Also, the table
- * of I2C devices pre-declared using i2c_register_board_info() is scanned,
- * and the appropriate driver model device nodes are created. Otherwise, a
- * negative errno value is returned.
- */
-int i2c_add_numbered_adapter(struct i2c_adapter *adap)
-{
- if (adap->nr == -1) /* -1 means dynamically assign bus id */
- return i2c_add_adapter(adap);
-
- return __i2c_add_numbered_adapter(adap);
-}
-EXPORT_SYMBOL_GPL(i2c_add_numbered_adapter);
-
-static void i2c_do_del_adapter(struct i2c_driver *driver,
- struct i2c_adapter *adapter)
-{
- struct i2c_client *client, *_n;
-
- /* Remove the devices we created ourselves as the result of hardware
- * probing (using a driver's detect method) */
- list_for_each_entry_safe(client, _n, &driver->clients, detected) {
- if (client->adapter == adapter) {
- dev_dbg(&adapter->dev, "Removing %s at 0x%x\n",
- client->name, client->addr);
- list_del(&client->detected);
- i2c_unregister_device(client);
- }
- }
-}
-
-static int __unregister_client(struct device *dev, void *dummy)
-{
- struct i2c_client *client = i2c_verify_client(dev);
- if (client && strcmp(client->name, "dummy"))
- i2c_unregister_device(client);
- return 0;
-}
-
-static int __unregister_dummy(struct device *dev, void *dummy)
-{
- struct i2c_client *client = i2c_verify_client(dev);
- if (client)
- i2c_unregister_device(client);
- return 0;
-}
-
-static int __process_removed_adapter(struct device_driver *d, void *data)
-{
- i2c_do_del_adapter(to_i2c_driver(d), data);
- return 0;
-}
-
-/**
- * i2c_del_adapter - unregister I2C adapter
- * @adap: the adapter being unregistered
- * Context: can sleep
- *
- * This unregisters an I2C adapter which was previously registered
- * by @i2c_add_adapter or @i2c_add_numbered_adapter.
- */
-void i2c_del_adapter(struct i2c_adapter *adap)
-{
- struct i2c_adapter *found;
- struct i2c_client *client, *next;
-
- /* First make sure that this adapter was ever added */
- mutex_lock(&core_lock);
- found = idr_find(&i2c_adapter_idr, adap->nr);
- mutex_unlock(&core_lock);
- if (found != adap) {
- pr_debug("attempting to delete unregistered adapter [%s]\n", adap->name);
- return;
- }
-
- i2c_acpi_remove_space_handler(adap);
- /* Tell drivers about this removal */
- mutex_lock(&core_lock);
- bus_for_each_drv(&i2c_bus_type, NULL, adap,
- __process_removed_adapter);
- mutex_unlock(&core_lock);
-
- /* Remove devices instantiated from sysfs */
- mutex_lock_nested(&adap->userspace_clients_lock,
- i2c_adapter_depth(adap));
- list_for_each_entry_safe(client, next, &adap->userspace_clients,
- detected) {
- dev_dbg(&adap->dev, "Removing %s at 0x%x\n", client->name,
- client->addr);
- list_del(&client->detected);
- i2c_unregister_device(client);
- }
- mutex_unlock(&adap->userspace_clients_lock);
-
- /* Detach any active clients. This can't fail, thus we do not
- * check the returned value. This is a two-pass process, because
- * we can't remove the dummy devices during the first pass: they
- * could have been instantiated by real devices wishing to clean
- * them up properly, so we give them a chance to do that first. */
- device_for_each_child(&adap->dev, NULL, __unregister_client);
- device_for_each_child(&adap->dev, NULL, __unregister_dummy);
-
-#ifdef CONFIG_I2C_COMPAT
- class_compat_remove_link(i2c_adapter_compat_class, &adap->dev,
- adap->dev.parent);
-#endif
-
- /* device name is gone after device_unregister */
- dev_dbg(&adap->dev, "adapter [%s] unregistered\n", adap->name);
-
- pm_runtime_disable(&adap->dev);
-
- i2c_host_notify_irq_teardown(adap);
-
- /* wait until all references to the device are gone
- *
- * FIXME: This is old code and should ideally be replaced by an
- * alternative which results in decoupling the lifetime of the struct
- * device from the i2c_adapter, like spi or netdev do. Any solution
- * should be thoroughly tested with DEBUG_KOBJECT_RELEASE enabled!
- */
- init_completion(&adap->dev_released);
- device_unregister(&adap->dev);
- wait_for_completion(&adap->dev_released);
-
- /* free bus id */
- mutex_lock(&core_lock);
- idr_remove(&i2c_adapter_idr, adap->nr);
- mutex_unlock(&core_lock);
-
- /* Clear the device structure in case this adapter is ever going to be
- added again */
- memset(&adap->dev, 0, sizeof(adap->dev));
-}
-EXPORT_SYMBOL(i2c_del_adapter);
-
-/**
- * i2c_parse_fw_timings - get I2C related timing parameters from firmware
- * @dev: The device to scan for I2C timing properties
- * @t: the i2c_timings struct to be filled with values
- * @use_defaults: bool to use sane defaults derived from the I2C specification
- * when properties are not found, otherwise use 0
- *
- * Scan the device for the generic I2C properties describing timing parameters
- * for the signal and fill the given struct with the results. If a property was
- * not found and use_defaults was true, then maximum timings are assumed which
- * are derived from the I2C specification. If use_defaults is not used, the
- * results will be 0, so drivers can apply their own defaults later. The latter
- * is mainly intended for avoiding regressions of existing drivers which want
- * to switch to this function. New drivers almost always should use the defaults.
- */
-
-void i2c_parse_fw_timings(struct device *dev, struct i2c_timings *t, bool use_defaults)
-{
- int ret;
-
- memset(t, 0, sizeof(*t));
-
- ret = device_property_read_u32(dev, "clock-frequency", &t->bus_freq_hz);
- if (ret && use_defaults)
- t->bus_freq_hz = 100000;
-
- ret = device_property_read_u32(dev, "i2c-scl-rising-time-ns", &t->scl_rise_ns);
- if (ret && use_defaults) {
- if (t->bus_freq_hz <= 100000)
- t->scl_rise_ns = 1000;
- else if (t->bus_freq_hz <= 400000)
- t->scl_rise_ns = 300;
- else
- t->scl_rise_ns = 120;
- }
-
- ret = device_property_read_u32(dev, "i2c-scl-falling-time-ns", &t->scl_fall_ns);
- if (ret && use_defaults) {
- if (t->bus_freq_hz <= 400000)
- t->scl_fall_ns = 300;
- else
- t->scl_fall_ns = 120;
- }
-
- device_property_read_u32(dev, "i2c-scl-internal-delay-ns", &t->scl_int_delay_ns);
-
- ret = device_property_read_u32(dev, "i2c-sda-falling-time-ns", &t->sda_fall_ns);
- if (ret && use_defaults)
- t->sda_fall_ns = t->scl_fall_ns;
-}
-EXPORT_SYMBOL_GPL(i2c_parse_fw_timings);
-
-/* ------------------------------------------------------------------------- */
-
-int i2c_for_each_dev(void *data, int (*fn)(struct device *, void *))
-{
- int res;
-
- mutex_lock(&core_lock);
- res = bus_for_each_dev(&i2c_bus_type, NULL, data, fn);
- mutex_unlock(&core_lock);
-
- return res;
-}
-EXPORT_SYMBOL_GPL(i2c_for_each_dev);
-
-static int __process_new_driver(struct device *dev, void *data)
-{
- if (dev->type != &i2c_adapter_type)
- return 0;
- return i2c_do_add_adapter(data, to_i2c_adapter(dev));
-}
-
-/*
- * An i2c_driver is used with one or more i2c_client (device) nodes to access
- * i2c slave chips, on a bus instance associated with some i2c_adapter.
- */
-
-int i2c_register_driver(struct module *owner, struct i2c_driver *driver)
-{
- int res;
-
- /* Can't register until after driver model init */
- if (WARN_ON(!is_registered))
- return -EAGAIN;
-
- /* add the driver to the list of i2c drivers in the driver core */
- driver->driver.owner = owner;
- driver->driver.bus = &i2c_bus_type;
- INIT_LIST_HEAD(&driver->clients);
-
- /* When registration returns, the driver core
- * will have called probe() for all matching-but-unbound devices.
- */
- res = driver_register(&driver->driver);
- if (res)
- return res;
-
- pr_debug("driver [%s] registered\n", driver->driver.name);
-
- /* Walk the adapters that are already present */
- i2c_for_each_dev(driver, __process_new_driver);
-
- return 0;
-}
-EXPORT_SYMBOL(i2c_register_driver);
-
-static int __process_removed_driver(struct device *dev, void *data)
-{
- if (dev->type == &i2c_adapter_type)
- i2c_do_del_adapter(data, to_i2c_adapter(dev));
- return 0;
-}
-
-/**
- * i2c_del_driver - unregister I2C driver
- * @driver: the driver being unregistered
- * Context: can sleep
- */
-void i2c_del_driver(struct i2c_driver *driver)
-{
- i2c_for_each_dev(driver, __process_removed_driver);
-
- driver_unregister(&driver->driver);
- pr_debug("driver [%s] unregistered\n", driver->driver.name);
-}
-EXPORT_SYMBOL(i2c_del_driver);
-
-/* ------------------------------------------------------------------------- */
-
-/**
- * i2c_use_client - increments the reference count of the i2c client structure
- * @client: the client being referenced
- *
- * Each live reference to a client should be refcounted. The driver model does
- * that automatically as part of driver binding, so that most drivers don't
- * need to do this explicitly: they hold a reference until they're unbound
- * from the device.
- *
- * A pointer to the client with the incremented reference counter is returned.
- */
-struct i2c_client *i2c_use_client(struct i2c_client *client)
-{
- if (client && get_device(&client->dev))
- return client;
- return NULL;
-}
-EXPORT_SYMBOL(i2c_use_client);
-
-/**
- * i2c_release_client - release a use of the i2c client structure
- * @client: the client being no longer referenced
- *
- * Must be called when a user of a client is finished with it.
- */
-void i2c_release_client(struct i2c_client *client)
-{
- if (client)
- put_device(&client->dev);
-}
-EXPORT_SYMBOL(i2c_release_client);
-
-struct i2c_cmd_arg {
- unsigned cmd;
- void *arg;
-};
-
-static int i2c_cmd(struct device *dev, void *_arg)
-{
- struct i2c_client *client = i2c_verify_client(dev);
- struct i2c_cmd_arg *arg = _arg;
- struct i2c_driver *driver;
-
- if (!client || !client->dev.driver)
- return 0;
-
- driver = to_i2c_driver(client->dev.driver);
- if (driver->command)
- driver->command(client, arg->cmd, arg->arg);
- return 0;
-}
-
-void i2c_clients_command(struct i2c_adapter *adap, unsigned int cmd, void *arg)
-{
- struct i2c_cmd_arg cmd_arg;
-
- cmd_arg.cmd = cmd;
- cmd_arg.arg = arg;
- device_for_each_child(&adap->dev, &cmd_arg, i2c_cmd);
-}
-EXPORT_SYMBOL(i2c_clients_command);
-
-#if IS_ENABLED(CONFIG_OF_DYNAMIC)
-static int of_i2c_notify(struct notifier_block *nb, unsigned long action,
- void *arg)
-{
- struct of_reconfig_data *rd = arg;
- struct i2c_adapter *adap;
- struct i2c_client *client;
-
- switch (of_reconfig_get_state_change(action, rd)) {
- case OF_RECONFIG_CHANGE_ADD:
- adap = of_find_i2c_adapter_by_node(rd->dn->parent);
- if (adap == NULL)
- return NOTIFY_OK; /* not for us */
-
- if (of_node_test_and_set_flag(rd->dn, OF_POPULATED)) {
- put_device(&adap->dev);
- return NOTIFY_OK;
- }
-
- client = of_i2c_register_device(adap, rd->dn);
- put_device(&adap->dev);
-
- if (IS_ERR(client)) {
- dev_err(&adap->dev, "failed to create client for '%s'\n",
- rd->dn->full_name);
- of_node_clear_flag(rd->dn, OF_POPULATED);
- return notifier_from_errno(PTR_ERR(client));
- }
- break;
- case OF_RECONFIG_CHANGE_REMOVE:
- /* already depopulated? */
- if (!of_node_check_flag(rd->dn, OF_POPULATED))
- return NOTIFY_OK;
-
- /* find our device by node */
- client = of_find_i2c_device_by_node(rd->dn);
- if (client == NULL)
- return NOTIFY_OK; /* no? not meant for us */
-
- /* unregister takes one ref away */
- i2c_unregister_device(client);
-
- /* and put the reference of the find */
- put_device(&client->dev);
- break;
- }
-
- return NOTIFY_OK;
-}
-static struct notifier_block i2c_of_notifier = {
- .notifier_call = of_i2c_notify,
-};
-#else
-extern struct notifier_block i2c_of_notifier;
-#endif /* CONFIG_OF_DYNAMIC */
-
-static int __init i2c_init(void)
-{
- int retval;
-
- retval = of_alias_get_highest_id("i2c");
-
- down_write(&__i2c_board_lock);
- if (retval >= __i2c_first_dynamic_bus_num)
- __i2c_first_dynamic_bus_num = retval + 1;
- up_write(&__i2c_board_lock);
-
- retval = bus_register(&i2c_bus_type);
- if (retval)
- return retval;
-
- is_registered = true;
-
-#ifdef CONFIG_I2C_COMPAT
- i2c_adapter_compat_class = class_compat_register("i2c-adapter");
- if (!i2c_adapter_compat_class) {
- retval = -ENOMEM;
- goto bus_err;
- }
-#endif
- retval = i2c_add_driver(&dummy_driver);
- if (retval)
- goto class_err;
-
- if (IS_ENABLED(CONFIG_OF_DYNAMIC))
- WARN_ON(of_reconfig_notifier_register(&i2c_of_notifier));
- if (IS_ENABLED(CONFIG_ACPI))
- WARN_ON(acpi_reconfig_notifier_register(&i2c_acpi_notifier));
-
- return 0;
-
-class_err:
-#ifdef CONFIG_I2C_COMPAT
- class_compat_unregister(i2c_adapter_compat_class);
-bus_err:
-#endif
- is_registered = false;
- bus_unregister(&i2c_bus_type);
- return retval;
-}
-
-static void __exit i2c_exit(void)
-{
- if (IS_ENABLED(CONFIG_ACPI))
- WARN_ON(acpi_reconfig_notifier_unregister(&i2c_acpi_notifier));
- if (IS_ENABLED(CONFIG_OF_DYNAMIC))
- WARN_ON(of_reconfig_notifier_unregister(&i2c_of_notifier));
- i2c_del_driver(&dummy_driver);
-#ifdef CONFIG_I2C_COMPAT
- class_compat_unregister(i2c_adapter_compat_class);
-#endif
- bus_unregister(&i2c_bus_type);
- tracepoint_synchronize_unregister();
-}
-
-/* We must initialize early, because some subsystems register i2c drivers
- * in subsys_initcall() code, but are linked (and initialized) before i2c.
- */
-postcore_initcall(i2c_init);
-module_exit(i2c_exit);
-
-/* ----------------------------------------------------
- * the functional interface to the i2c busses.
- * ----------------------------------------------------
- */
-
-/* Check if val is exceeding the quirk IFF quirk is non 0 */
-#define i2c_quirk_exceeded(val, quirk) ((quirk) && ((val) > (quirk)))
-
-static int i2c_quirk_error(struct i2c_adapter *adap, struct i2c_msg *msg, char *err_msg)
-{
- dev_err_ratelimited(&adap->dev, "adapter quirk: %s (addr 0x%04x, size %u, %s)\n",
- err_msg, msg->addr, msg->len,
- msg->flags & I2C_M_RD ? "read" : "write");
- return -EOPNOTSUPP;
-}
-
-static int i2c_check_for_quirks(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
-{
- const struct i2c_adapter_quirks *q = adap->quirks;
- int max_num = q->max_num_msgs, i;
- bool do_len_check = true;
-
- if (q->flags & I2C_AQ_COMB) {
- max_num = 2;
-
- /* special checks for combined messages */
- if (num == 2) {
- if (q->flags & I2C_AQ_COMB_WRITE_FIRST && msgs[0].flags & I2C_M_RD)
- return i2c_quirk_error(adap, &msgs[0], "1st comb msg must be write");
-
- if (q->flags & I2C_AQ_COMB_READ_SECOND && !(msgs[1].flags & I2C_M_RD))
- return i2c_quirk_error(adap, &msgs[1], "2nd comb msg must be read");
-
- if (q->flags & I2C_AQ_COMB_SAME_ADDR && msgs[0].addr != msgs[1].addr)
- return i2c_quirk_error(adap, &msgs[0], "comb msg only to same addr");
-
- if (i2c_quirk_exceeded(msgs[0].len, q->max_comb_1st_msg_len))
- return i2c_quirk_error(adap, &msgs[0], "msg too long");
-
- if (i2c_quirk_exceeded(msgs[1].len, q->max_comb_2nd_msg_len))
- return i2c_quirk_error(adap, &msgs[1], "msg too long");
-
- do_len_check = false;
- }
- }
-
- if (i2c_quirk_exceeded(num, max_num))
- return i2c_quirk_error(adap, &msgs[0], "too many messages");
-
- for (i = 0; i < num; i++) {
- u16 len = msgs[i].len;
-
- if (msgs[i].flags & I2C_M_RD) {
- if (do_len_check && i2c_quirk_exceeded(len, q->max_read_len))
- return i2c_quirk_error(adap, &msgs[i], "msg too long");
- } else {
- if (do_len_check && i2c_quirk_exceeded(len, q->max_write_len))
- return i2c_quirk_error(adap, &msgs[i], "msg too long");
- }
- }
-
- return 0;
-}
-
-/**
- * __i2c_transfer - unlocked flavor of i2c_transfer
- * @adap: Handle to I2C bus
- * @msgs: One or more messages to execute before STOP is issued to
- * terminate the operation; each message begins with a START.
- * @num: Number of messages to be executed.
- *
- * Returns negative errno, else the number of messages executed.
- *
- * Adapter lock must be held when calling this function. No debug logging
- * takes place. adap->algo->master_xfer existence isn't checked.
- */
-int __i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
-{
- unsigned long orig_jiffies;
- int ret, try;
-
- if (adap->quirks && i2c_check_for_quirks(adap, msgs, num))
- return -EOPNOTSUPP;
-
- /* i2c_trace_msg gets enabled when tracepoint i2c_transfer gets
- * enabled. This is an efficient way of keeping the for-loop from
- * being executed when not needed.
- */
- if (static_key_false(&i2c_trace_msg)) {
- int i;
- for (i = 0; i < num; i++)
- if (msgs[i].flags & I2C_M_RD)
- trace_i2c_read(adap, &msgs[i], i);
- else
- trace_i2c_write(adap, &msgs[i], i);
- }
-
- /* Retry automatically on arbitration loss */
- orig_jiffies = jiffies;
- for (ret = 0, try = 0; try <= adap->retries; try++) {
- ret = adap->algo->master_xfer(adap, msgs, num);
- if (ret != -EAGAIN)
- break;
- if (time_after(jiffies, orig_jiffies + adap->timeout))
- break;
- }
-
- if (static_key_false(&i2c_trace_msg)) {
- int i;
- for (i = 0; i < ret; i++)
- if (msgs[i].flags & I2C_M_RD)
- trace_i2c_reply(adap, &msgs[i], i);
- trace_i2c_result(adap, i, ret);
- }
-
- return ret;
-}
-EXPORT_SYMBOL(__i2c_transfer);
-
-/**
- * i2c_transfer - execute a single or combined I2C message
- * @adap: Handle to I2C bus
- * @msgs: One or more messages to execute before STOP is issued to
- * terminate the operation; each message begins with a START.
- * @num: Number of messages to be executed.
- *
- * Returns negative errno, else the number of messages executed.
- *
- * Note that there is no requirement that each message be sent to
- * the same slave address, although that is the most common model.
- */
-int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
-{
- int ret;
-
- /* REVISIT the fault reporting model here is weak:
- *
- * - When we get an error after receiving N bytes from a slave,
- * there is no way to report "N".
- *
- * - When we get a NAK after transmitting N bytes to a slave,
- * there is no way to report "N" ... or to let the master
- * continue executing the rest of this combined message, if
- * that's the appropriate response.
- *
- * - When for example "num" is two and we successfully complete
- * the first message but get an error part way through the
- * second, it's unclear whether that should be reported as
- * one (discarding status on the second message) or errno
- * (discarding status on the first one).
- */
-
- if (adap->algo->master_xfer) {
-#ifdef DEBUG
- for (ret = 0; ret < num; ret++) {
- dev_dbg(&adap->dev,
- "master_xfer[%d] %c, addr=0x%02x, len=%d%s\n",
- ret, (msgs[ret].flags & I2C_M_RD) ? 'R' : 'W',
- msgs[ret].addr, msgs[ret].len,
- (msgs[ret].flags & I2C_M_RECV_LEN) ? "+" : "");
- }
-#endif
-
- if (in_atomic() || irqs_disabled()) {
- ret = i2c_trylock_bus(adap, I2C_LOCK_SEGMENT);
- if (!ret)
- /* I2C activity is ongoing. */
- return -EAGAIN;
- } else {
- i2c_lock_bus(adap, I2C_LOCK_SEGMENT);
- }
-
- ret = __i2c_transfer(adap, msgs, num);
- i2c_unlock_bus(adap, I2C_LOCK_SEGMENT);
-
- return ret;
- } else {
- dev_dbg(&adap->dev, "I2C level transfers not supported\n");
- return -EOPNOTSUPP;
- }
-}
-EXPORT_SYMBOL(i2c_transfer);
-
-/**
- * i2c_master_send - issue a single I2C message in master transmit mode
- * @client: Handle to slave device
- * @buf: Data that will be written to the slave
- * @count: How many bytes to write, must be less than 64k since msg.len is u16
- *
- * Returns negative errno, or else the number of bytes written.
- */
-int i2c_master_send(const struct i2c_client *client, const char *buf, int count)
-{
- int ret;
- struct i2c_adapter *adap = client->adapter;
- struct i2c_msg msg;
-
- msg.addr = client->addr;
- msg.flags = client->flags & I2C_M_TEN;
- msg.len = count;
- msg.buf = (char *)buf;
-
- ret = i2c_transfer(adap, &msg, 1);
-
- /*
- * If everything went ok (i.e. 1 msg transmitted), return #bytes
- * transmitted, else error code.
- */
- return (ret == 1) ? count : ret;
-}
-EXPORT_SYMBOL(i2c_master_send);
-
-/**
- * i2c_master_recv - issue a single I2C message in master receive mode
- * @client: Handle to slave device
- * @buf: Where to store data read from slave
- * @count: How many bytes to read, must be less than 64k since msg.len is u16
- *
- * Returns negative errno, or else the number of bytes read.
- */
-int i2c_master_recv(const struct i2c_client *client, char *buf, int count)
-{
- struct i2c_adapter *adap = client->adapter;
- struct i2c_msg msg;
- int ret;
-
- msg.addr = client->addr;
- msg.flags = client->flags & I2C_M_TEN;
- msg.flags |= I2C_M_RD;
- msg.len = count;
- msg.buf = buf;
-
- ret = i2c_transfer(adap, &msg, 1);
-
- /*
- * If everything went ok (i.e. 1 msg received), return #bytes received,
- * else error code.
- */
- return (ret == 1) ? count : ret;
-}
-EXPORT_SYMBOL(i2c_master_recv);
-
-/* ----------------------------------------------------
- * the i2c address scanning function
- * Will not work for 10-bit addresses!
- * ----------------------------------------------------
- */
-
-/*
- * Legacy default probe function, mostly relevant for SMBus. The default
- * probe method is a quick write, but it is known to corrupt the 24RF08
- * EEPROMs due to a state machine bug, and could also irreversibly
- * write-protect some EEPROMs, so for address ranges 0x30-0x37 and 0x50-0x5f,
- * we use a short byte read instead. Also, some bus drivers don't implement
- * quick write, so we fallback to a byte read in that case too.
- * On x86, there is another special case for FSC hardware monitoring chips,
- * which want regular byte reads (address 0x73.) Fortunately, these are the
- * only known chips using this I2C address on PC hardware.
- * Returns 1 if probe succeeded, 0 if not.
- */
-static int i2c_default_probe(struct i2c_adapter *adap, unsigned short addr)
-{
- int err;
- union i2c_smbus_data dummy;
-
-#ifdef CONFIG_X86
- if (addr == 0x73 && (adap->class & I2C_CLASS_HWMON)
- && i2c_check_functionality(adap, I2C_FUNC_SMBUS_READ_BYTE_DATA))
- err = i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_READ, 0,
- I2C_SMBUS_BYTE_DATA, &dummy);
- else
-#endif
- if (!((addr & ~0x07) == 0x30 || (addr & ~0x0f) == 0x50)
- && i2c_check_functionality(adap, I2C_FUNC_SMBUS_QUICK))
- err = i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_WRITE, 0,
- I2C_SMBUS_QUICK, NULL);
- else if (i2c_check_functionality(adap, I2C_FUNC_SMBUS_READ_BYTE))
- err = i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_READ, 0,
- I2C_SMBUS_BYTE, &dummy);
- else {
- dev_warn(&adap->dev, "No suitable probing method supported for address 0x%02X\n",
- addr);
- err = -EOPNOTSUPP;
- }
-
- return err >= 0;
-}
-
-static int i2c_detect_address(struct i2c_client *temp_client,
- struct i2c_driver *driver)
-{
- struct i2c_board_info info;
- struct i2c_adapter *adapter = temp_client->adapter;
- int addr = temp_client->addr;
- int err;
-
- /* Make sure the address is valid */
- err = i2c_check_7bit_addr_validity_strict(addr);
- if (err) {
- dev_warn(&adapter->dev, "Invalid probe address 0x%02x\n",
- addr);
- return err;
- }
-
- /* Skip if already in use (7 bit, no need to encode flags) */
- if (i2c_check_addr_busy(adapter, addr))
- return 0;
-
- /* Make sure there is something at this address */
- if (!i2c_default_probe(adapter, addr))
- return 0;
-
- /* Finally call the custom detection function */
- memset(&info, 0, sizeof(struct i2c_board_info));
- info.addr = addr;
- err = driver->detect(temp_client, &info);
- if (err) {
- /* -ENODEV is returned if the detection fails. We catch it
- here as this isn't an error. */
- return err == -ENODEV ? 0 : err;
- }
-
- /* Consistency check */
- if (info.type[0] == '\0') {
- dev_err(&adapter->dev,
- "%s detection function provided no name for 0x%x\n",
- driver->driver.name, addr);
- } else {
- struct i2c_client *client;
-
- /* Detection succeeded, instantiate the device */
- if (adapter->class & I2C_CLASS_DEPRECATED)
- dev_warn(&adapter->dev,
- "This adapter will soon drop class based instantiation of devices. "
- "Please make sure client 0x%02x gets instantiated by other means. "
- "Check 'Documentation/i2c/instantiating-devices' for details.\n",
- info.addr);
-
- dev_dbg(&adapter->dev, "Creating %s at 0x%02x\n",
- info.type, info.addr);
- client = i2c_new_device(adapter, &info);
- if (client)
- list_add_tail(&client->detected, &driver->clients);
- else
- dev_err(&adapter->dev, "Failed creating %s at 0x%02x\n",
- info.type, info.addr);
- }
- return 0;
-}
-
-static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver)
-{
- const unsigned short *address_list;
- struct i2c_client *temp_client;
- int i, err = 0;
- int adap_id = i2c_adapter_id(adapter);
-
- address_list = driver->address_list;
- if (!driver->detect || !address_list)
- return 0;
-
- /* Warn that the adapter lost class based instantiation */
- if (adapter->class == I2C_CLASS_DEPRECATED) {
- dev_dbg(&adapter->dev,
- "This adapter dropped support for I2C classes and won't auto-detect %s devices anymore. "
- "If you need it, check 'Documentation/i2c/instantiating-devices' for alternatives.\n",
- driver->driver.name);
- return 0;
- }
-
- /* Stop here if the classes do not match */
- if (!(adapter->class & driver->class))
- return 0;
-
- /* Set up a temporary client to help detect callback */
- temp_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (!temp_client)
- return -ENOMEM;
- temp_client->adapter = adapter;
-
- for (i = 0; address_list[i] != I2C_CLIENT_END; i += 1) {
- dev_dbg(&adapter->dev,
- "found normal entry for adapter %d, addr 0x%02x\n",
- adap_id, address_list[i]);
- temp_client->addr = address_list[i];
- err = i2c_detect_address(temp_client, driver);
- if (unlikely(err))
- break;
- }
-
- kfree(temp_client);
- return err;
-}
-
-int i2c_probe_func_quick_read(struct i2c_adapter *adap, unsigned short addr)
-{
- return i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_READ, 0,
- I2C_SMBUS_QUICK, NULL) >= 0;
-}
-EXPORT_SYMBOL_GPL(i2c_probe_func_quick_read);
-
-struct i2c_client *
-i2c_new_probed_device(struct i2c_adapter *adap,
- struct i2c_board_info *info,
- unsigned short const *addr_list,
- int (*probe)(struct i2c_adapter *, unsigned short addr))
-{
- int i;
-
- if (!probe)
- probe = i2c_default_probe;
-
- for (i = 0; addr_list[i] != I2C_CLIENT_END; i++) {
- /* Check address validity */
- if (i2c_check_7bit_addr_validity_strict(addr_list[i]) < 0) {
- dev_warn(&adap->dev, "Invalid 7-bit address 0x%02x\n",
- addr_list[i]);
- continue;
- }
-
- /* Check address availability (7 bit, no need to encode flags) */
- if (i2c_check_addr_busy(adap, addr_list[i])) {
- dev_dbg(&adap->dev,
- "Address 0x%02x already in use, not probing\n",
- addr_list[i]);
- continue;
- }
-
- /* Test address responsiveness */
- if (probe(adap, addr_list[i]))
- break;
- }
-
- if (addr_list[i] == I2C_CLIENT_END) {
- dev_dbg(&adap->dev, "Probing failed, no device found\n");
- return NULL;
- }
-
- info->addr = addr_list[i];
- return i2c_new_device(adap, info);
-}
-EXPORT_SYMBOL_GPL(i2c_new_probed_device);
-
-struct i2c_adapter *i2c_get_adapter(int nr)
-{
- struct i2c_adapter *adapter;
-
- mutex_lock(&core_lock);
- adapter = idr_find(&i2c_adapter_idr, nr);
- if (!adapter)
- goto exit;
-
- if (try_module_get(adapter->owner))
- get_device(&adapter->dev);
- else
- adapter = NULL;
-
- exit:
- mutex_unlock(&core_lock);
- return adapter;
-}
-EXPORT_SYMBOL(i2c_get_adapter);
-
-void i2c_put_adapter(struct i2c_adapter *adap)
-{
- if (!adap)
- return;
-
- put_device(&adap->dev);
- module_put(adap->owner);
-}
-EXPORT_SYMBOL(i2c_put_adapter);
-
-/* The SMBus parts */
-
-#define POLY (0x1070U << 3)
-static u8 crc8(u16 data)
-{
- int i;
-
- for (i = 0; i < 8; i++) {
- if (data & 0x8000)
- data = data ^ POLY;
- data = data << 1;
- }
- return (u8)(data >> 8);
-}
-
-/* Incremental CRC8 over count bytes in the array pointed to by p */
-static u8 i2c_smbus_pec(u8 crc, u8 *p, size_t count)
-{
- int i;
-
- for (i = 0; i < count; i++)
- crc = crc8((crc ^ p[i]) << 8);
- return crc;
-}
-
-/* Assume a 7-bit address, which is reasonable for SMBus */
-static u8 i2c_smbus_msg_pec(u8 pec, struct i2c_msg *msg)
-{
- /* The address will be sent first */
- u8 addr = i2c_8bit_addr_from_msg(msg);
- pec = i2c_smbus_pec(pec, &addr, 1);
-
- /* The data buffer follows */
- return i2c_smbus_pec(pec, msg->buf, msg->len);
-}
-
-/* Used for write only transactions */
-static inline void i2c_smbus_add_pec(struct i2c_msg *msg)
-{
- msg->buf[msg->len] = i2c_smbus_msg_pec(0, msg);
- msg->len++;
-}
-
-/* Return <0 on CRC error
- If there was a write before this read (most cases) we need to take the
- partial CRC from the write part into account.
- Note that this function does modify the message (we need to decrease the
- message length to hide the CRC byte from the caller). */
-static int i2c_smbus_check_pec(u8 cpec, struct i2c_msg *msg)
-{
- u8 rpec = msg->buf[--msg->len];
- cpec = i2c_smbus_msg_pec(cpec, msg);
-
- if (rpec != cpec) {
- pr_debug("Bad PEC 0x%02x vs. 0x%02x\n",
- rpec, cpec);
- return -EBADMSG;
- }
- return 0;
-}
-
-/**
- * i2c_smbus_read_byte - SMBus "receive byte" protocol
- * @client: Handle to slave device
- *
- * This executes the SMBus "receive byte" protocol, returning negative errno
- * else the byte received from the device.
- */
-s32 i2c_smbus_read_byte(const struct i2c_client *client)
-{
- union i2c_smbus_data data;
- int status;
-
- status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
- I2C_SMBUS_READ, 0,
- I2C_SMBUS_BYTE, &data);
- return (status < 0) ? status : data.byte;
-}
-EXPORT_SYMBOL(i2c_smbus_read_byte);
-
-/**
- * i2c_smbus_write_byte - SMBus "send byte" protocol
- * @client: Handle to slave device
- * @value: Byte to be sent
- *
- * This executes the SMBus "send byte" protocol, returning negative errno
- * else zero on success.
- */
-s32 i2c_smbus_write_byte(const struct i2c_client *client, u8 value)
-{
- return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
- I2C_SMBUS_WRITE, value, I2C_SMBUS_BYTE, NULL);
-}
-EXPORT_SYMBOL(i2c_smbus_write_byte);
-
-/**
- * i2c_smbus_read_byte_data - SMBus "read byte" protocol
- * @client: Handle to slave device
- * @command: Byte interpreted by slave
- *
- * This executes the SMBus "read byte" protocol, returning negative errno
- * else a data byte received from the device.
- */
-s32 i2c_smbus_read_byte_data(const struct i2c_client *client, u8 command)
-{
- union i2c_smbus_data data;
- int status;
-
- status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
- I2C_SMBUS_READ, command,
- I2C_SMBUS_BYTE_DATA, &data);
- return (status < 0) ? status : data.byte;
-}
-EXPORT_SYMBOL(i2c_smbus_read_byte_data);
-
-/**
- * i2c_smbus_write_byte_data - SMBus "write byte" protocol
- * @client: Handle to slave device
- * @command: Byte interpreted by slave
- * @value: Byte being written
- *
- * This executes the SMBus "write byte" protocol, returning negative errno
- * else zero on success.
- */
-s32 i2c_smbus_write_byte_data(const struct i2c_client *client, u8 command,
- u8 value)
-{
- union i2c_smbus_data data;
- data.byte = value;
- return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
- I2C_SMBUS_WRITE, command,
- I2C_SMBUS_BYTE_DATA, &data);
-}
-EXPORT_SYMBOL(i2c_smbus_write_byte_data);
-
-/**
- * i2c_smbus_read_word_data - SMBus "read word" protocol
- * @client: Handle to slave device
- * @command: Byte interpreted by slave
- *
- * This executes the SMBus "read word" protocol, returning negative errno
- * else a 16-bit unsigned "word" received from the device.
- */
-s32 i2c_smbus_read_word_data(const struct i2c_client *client, u8 command)
-{
- union i2c_smbus_data data;
- int status;
-
- status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
- I2C_SMBUS_READ, command,
- I2C_SMBUS_WORD_DATA, &data);
- return (status < 0) ? status : data.word;
-}
-EXPORT_SYMBOL(i2c_smbus_read_word_data);
-
-/**
- * i2c_smbus_write_word_data - SMBus "write word" protocol
- * @client: Handle to slave device
- * @command: Byte interpreted by slave
- * @value: 16-bit "word" being written
- *
- * This executes the SMBus "write word" protocol, returning negative errno
- * else zero on success.
- */
-s32 i2c_smbus_write_word_data(const struct i2c_client *client, u8 command,
- u16 value)
-{
- union i2c_smbus_data data;
- data.word = value;
- return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
- I2C_SMBUS_WRITE, command,
- I2C_SMBUS_WORD_DATA, &data);
-}
-EXPORT_SYMBOL(i2c_smbus_write_word_data);
-
-/**
- * i2c_smbus_read_block_data - SMBus "block read" protocol
- * @client: Handle to slave device
- * @command: Byte interpreted by slave
- * @values: Byte array into which data will be read; big enough to hold
- * the data returned by the slave. SMBus allows at most 32 bytes.
- *
- * This executes the SMBus "block read" protocol, returning negative errno
- * else the number of data bytes in the slave's response.
- *
- * Note that using this function requires that the client's adapter support
- * the I2C_FUNC_SMBUS_READ_BLOCK_DATA functionality. Not all adapter drivers
- * support this; its emulation through I2C messaging relies on a specific
- * mechanism (I2C_M_RECV_LEN) which may not be implemented.
- */
-s32 i2c_smbus_read_block_data(const struct i2c_client *client, u8 command,
- u8 *values)
-{
- union i2c_smbus_data data;
- int status;
-
- status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
- I2C_SMBUS_READ, command,
- I2C_SMBUS_BLOCK_DATA, &data);
- if (status)
- return status;
-
- memcpy(values, &data.block[1], data.block[0]);
- return data.block[0];
-}
-EXPORT_SYMBOL(i2c_smbus_read_block_data);
-
-/**
- * i2c_smbus_write_block_data - SMBus "block write" protocol
- * @client: Handle to slave device
- * @command: Byte interpreted by slave
- * @length: Size of data block; SMBus allows at most 32 bytes
- * @values: Byte array which will be written.
- *
- * This executes the SMBus "block write" protocol, returning negative errno
- * else zero on success.
- */
-s32 i2c_smbus_write_block_data(const struct i2c_client *client, u8 command,
- u8 length, const u8 *values)
-{
- union i2c_smbus_data data;
-
- if (length > I2C_SMBUS_BLOCK_MAX)
- length = I2C_SMBUS_BLOCK_MAX;
- data.block[0] = length;
- memcpy(&data.block[1], values, length);
- return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
- I2C_SMBUS_WRITE, command,
- I2C_SMBUS_BLOCK_DATA, &data);
-}
-EXPORT_SYMBOL(i2c_smbus_write_block_data);
-
-/* Returns the number of read bytes */
-s32 i2c_smbus_read_i2c_block_data(const struct i2c_client *client, u8 command,
- u8 length, u8 *values)
-{
- union i2c_smbus_data data;
- int status;
-
- if (length > I2C_SMBUS_BLOCK_MAX)
- length = I2C_SMBUS_BLOCK_MAX;
- data.block[0] = length;
- status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
- I2C_SMBUS_READ, command,
- I2C_SMBUS_I2C_BLOCK_DATA, &data);
- if (status < 0)
- return status;
-
- memcpy(values, &data.block[1], data.block[0]);
- return data.block[0];
-}
-EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data);
-
-s32 i2c_smbus_write_i2c_block_data(const struct i2c_client *client, u8 command,
- u8 length, const u8 *values)
-{
- union i2c_smbus_data data;
-
- if (length > I2C_SMBUS_BLOCK_MAX)
- length = I2C_SMBUS_BLOCK_MAX;
- data.block[0] = length;
- memcpy(data.block + 1, values, length);
- return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
- I2C_SMBUS_WRITE, command,
- I2C_SMBUS_I2C_BLOCK_DATA, &data);
-}
-EXPORT_SYMBOL(i2c_smbus_write_i2c_block_data);
-
-/* Simulate a SMBus command using the i2c protocol
- No checking of parameters is done! */
-static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr,
- unsigned short flags,
- char read_write, u8 command, int size,
- union i2c_smbus_data *data)
-{
- /* So we need to generate a series of msgs. In the case of writing, we
- need to use only one message; when reading, we need two. We initialize
- most things with sane defaults, to keep the code below somewhat
- simpler. */
- unsigned char msgbuf0[I2C_SMBUS_BLOCK_MAX+3];
- unsigned char msgbuf1[I2C_SMBUS_BLOCK_MAX+2];
- int num = read_write == I2C_SMBUS_READ ? 2 : 1;
- int i;
- u8 partial_pec = 0;
- int status;
- struct i2c_msg msg[2] = {
- {
- .addr = addr,
- .flags = flags,
- .len = 1,
- .buf = msgbuf0,
- }, {
- .addr = addr,
- .flags = flags | I2C_M_RD,
- .len = 0,
- .buf = msgbuf1,
- },
- };
-
- msgbuf0[0] = command;
- switch (size) {
- case I2C_SMBUS_QUICK:
- msg[0].len = 0;
- /* Special case: The read/write field is used as data */
- msg[0].flags = flags | (read_write == I2C_SMBUS_READ ?
- I2C_M_RD : 0);
- num = 1;
- break;
- case I2C_SMBUS_BYTE:
- if (read_write == I2C_SMBUS_READ) {
- /* Special case: only a read! */
- msg[0].flags = I2C_M_RD | flags;
- num = 1;
- }
- break;
- case I2C_SMBUS_BYTE_DATA:
- if (read_write == I2C_SMBUS_READ)
- msg[1].len = 1;
- else {
- msg[0].len = 2;
- msgbuf0[1] = data->byte;
- }
- break;
- case I2C_SMBUS_WORD_DATA:
- if (read_write == I2C_SMBUS_READ)
- msg[1].len = 2;
- else {
- msg[0].len = 3;
- msgbuf0[1] = data->word & 0xff;
- msgbuf0[2] = data->word >> 8;
- }
- break;
- case I2C_SMBUS_PROC_CALL:
- num = 2; /* Special case */
- read_write = I2C_SMBUS_READ;
- msg[0].len = 3;
- msg[1].len = 2;
- msgbuf0[1] = data->word & 0xff;
- msgbuf0[2] = data->word >> 8;
- break;
- case I2C_SMBUS_BLOCK_DATA:
- if (read_write == I2C_SMBUS_READ) {
- msg[1].flags |= I2C_M_RECV_LEN;
- msg[1].len = 1; /* block length will be added by
- the underlying bus driver */
- } else {
- msg[0].len = data->block[0] + 2;
- if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 2) {
- dev_err(&adapter->dev,
- "Invalid block write size %d\n",
- data->block[0]);
- return -EINVAL;
- }
- for (i = 1; i < msg[0].len; i++)
- msgbuf0[i] = data->block[i-1];
- }
- break;
- case I2C_SMBUS_BLOCK_PROC_CALL:
- num = 2; /* Another special case */
- read_write = I2C_SMBUS_READ;
- if (data->block[0] > I2C_SMBUS_BLOCK_MAX) {
- dev_err(&adapter->dev,
- "Invalid block write size %d\n",
- data->block[0]);
- return -EINVAL;
- }
- msg[0].len = data->block[0] + 2;
- for (i = 1; i < msg[0].len; i++)
- msgbuf0[i] = data->block[i-1];
- msg[1].flags |= I2C_M_RECV_LEN;
- msg[1].len = 1; /* block length will be added by
- the underlying bus driver */
- break;
- case I2C_SMBUS_I2C_BLOCK_DATA:
- if (read_write == I2C_SMBUS_READ) {
- msg[1].len = data->block[0];
- } else {
- msg[0].len = data->block[0] + 1;
- if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 1) {
- dev_err(&adapter->dev,
- "Invalid block write size %d\n",
- data->block[0]);
- return -EINVAL;
- }
- for (i = 1; i <= data->block[0]; i++)
- msgbuf0[i] = data->block[i];
- }
- break;
- default:
- dev_err(&adapter->dev, "Unsupported transaction %d\n", size);
- return -EOPNOTSUPP;
- }
-
- i = ((flags & I2C_CLIENT_PEC) && size != I2C_SMBUS_QUICK
- && size != I2C_SMBUS_I2C_BLOCK_DATA);
- if (i) {
- /* Compute PEC if first message is a write */
- if (!(msg[0].flags & I2C_M_RD)) {
- if (num == 1) /* Write only */
- i2c_smbus_add_pec(&msg[0]);
- else /* Write followed by read */
- partial_pec = i2c_smbus_msg_pec(0, &msg[0]);
- }
- /* Ask for PEC if last message is a read */
- if (msg[num-1].flags & I2C_M_RD)
- msg[num-1].len++;
- }
-
- status = i2c_transfer(adapter, msg, num);
- if (status < 0)
- return status;
-
- /* Check PEC if last message is a read */
- if (i && (msg[num-1].flags & I2C_M_RD)) {
- status = i2c_smbus_check_pec(partial_pec, &msg[num-1]);
- if (status < 0)
- return status;
- }
-
- if (read_write == I2C_SMBUS_READ)
- switch (size) {
- case I2C_SMBUS_BYTE:
- data->byte = msgbuf0[0];
- break;
- case I2C_SMBUS_BYTE_DATA:
- data->byte = msgbuf1[0];
- break;
- case I2C_SMBUS_WORD_DATA:
- case I2C_SMBUS_PROC_CALL:
- data->word = msgbuf1[0] | (msgbuf1[1] << 8);
- break;
- case I2C_SMBUS_I2C_BLOCK_DATA:
- for (i = 0; i < data->block[0]; i++)
- data->block[i+1] = msgbuf1[i];
- break;
- case I2C_SMBUS_BLOCK_DATA:
- case I2C_SMBUS_BLOCK_PROC_CALL:
- for (i = 0; i < msgbuf1[0] + 1; i++)
- data->block[i] = msgbuf1[i];
- break;
- }
- return 0;
-}
-
-/**
- * i2c_smbus_xfer - execute SMBus protocol operations
- * @adapter: Handle to I2C bus
- * @addr: Address of SMBus slave on that bus
- * @flags: I2C_CLIENT_* flags (usually zero or I2C_CLIENT_PEC)
- * @read_write: I2C_SMBUS_READ or I2C_SMBUS_WRITE
- * @command: Byte interpreted by slave, for protocols which use such bytes
- * @protocol: SMBus protocol operation to execute, such as I2C_SMBUS_PROC_CALL
- * @data: Data to be read or written
- *
- * This executes an SMBus protocol operation, and returns a negative
- * errno code else zero on success.
- */
-s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, unsigned short flags,
- char read_write, u8 command, int protocol,
- union i2c_smbus_data *data)
-{
- unsigned long orig_jiffies;
- int try;
- s32 res;
-
- /* If enabled, the following two tracepoints are conditional on
- * read_write and protocol.
- */
- trace_smbus_write(adapter, addr, flags, read_write,
- command, protocol, data);
- trace_smbus_read(adapter, addr, flags, read_write,
- command, protocol);
-
- flags &= I2C_M_TEN | I2C_CLIENT_PEC | I2C_CLIENT_SCCB;
-
- if (adapter->algo->smbus_xfer) {
- i2c_lock_bus(adapter, I2C_LOCK_SEGMENT);
-
- /* Retry automatically on arbitration loss */
- orig_jiffies = jiffies;
- for (res = 0, try = 0; try <= adapter->retries; try++) {
- res = adapter->algo->smbus_xfer(adapter, addr, flags,
- read_write, command,
- protocol, data);
- if (res != -EAGAIN)
- break;
- if (time_after(jiffies,
- orig_jiffies + adapter->timeout))
- break;
- }
- i2c_unlock_bus(adapter, I2C_LOCK_SEGMENT);
-
- if (res != -EOPNOTSUPP || !adapter->algo->master_xfer)
- goto trace;
- /*
- * Fall back to i2c_smbus_xfer_emulated if the adapter doesn't
- * implement native support for the SMBus operation.
- */
- }
-
- res = i2c_smbus_xfer_emulated(adapter, addr, flags, read_write,
- command, protocol, data);
-
-trace:
- /* If enabled, the reply tracepoint is conditional on read_write. */
- trace_smbus_reply(adapter, addr, flags, read_write,
- command, protocol, data);
- trace_smbus_result(adapter, addr, flags, read_write,
- command, protocol, res);
-
- return res;
-}
-EXPORT_SYMBOL(i2c_smbus_xfer);
-
-/**
- * i2c_smbus_read_i2c_block_data_or_emulated - read block or emulate
- * @client: Handle to slave device
- * @command: Byte interpreted by slave
- * @length: Size of data block; SMBus allows at most I2C_SMBUS_BLOCK_MAX bytes
- * @values: Byte array into which data will be read; big enough to hold
- * the data returned by the slave. SMBus allows at most
- * I2C_SMBUS_BLOCK_MAX bytes.
- *
- * This executes the SMBus "block read" protocol if supported by the adapter.
- * If block read is not supported, it emulates it using either word or byte
- * read protocols depending on availability.
- *
- * The addresses of the I2C slave device that are accessed with this function
- * must be mapped to a linear region, so that a block read will have the same
- * effect as a byte read. Before using this function you must double-check
- * if the I2C slave does support exchanging a block transfer with a byte
- * transfer.
- */
-s32 i2c_smbus_read_i2c_block_data_or_emulated(const struct i2c_client *client,
- u8 command, u8 length, u8 *values)
-{
- u8 i = 0;
- int status;
-
- if (length > I2C_SMBUS_BLOCK_MAX)
- length = I2C_SMBUS_BLOCK_MAX;
-
- if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK))
- return i2c_smbus_read_i2c_block_data(client, command, length, values);
-
- if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA))
- return -EOPNOTSUPP;
-
- if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_WORD_DATA)) {
- while ((i + 2) <= length) {
- status = i2c_smbus_read_word_data(client, command + i);
- if (status < 0)
- return status;
- values[i] = status & 0xff;
- values[i + 1] = status >> 8;
- i += 2;
- }
- }
-
- while (i < length) {
- status = i2c_smbus_read_byte_data(client, command + i);
- if (status < 0)
- return status;
- values[i] = status;
- i++;
- }
-
- return i;
-}
-EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data_or_emulated);
-
-#if IS_ENABLED(CONFIG_I2C_SLAVE)
-int i2c_slave_register(struct i2c_client *client, i2c_slave_cb_t slave_cb)
-{
- int ret;
-
- if (!client || !slave_cb) {
- WARN(1, "insufficient data\n");
- return -EINVAL;
- }
-
- if (!(client->flags & I2C_CLIENT_SLAVE))
- dev_warn(&client->dev, "%s: client slave flag not set. You might see address collisions\n",
- __func__);
-
- if (!(client->flags & I2C_CLIENT_TEN)) {
- /* Enforce stricter address checking */
- ret = i2c_check_7bit_addr_validity_strict(client->addr);
- if (ret) {
- dev_err(&client->dev, "%s: invalid address\n", __func__);
- return ret;
- }
- }
-
- if (!client->adapter->algo->reg_slave) {
- dev_err(&client->dev, "%s: not supported by adapter\n", __func__);
- return -EOPNOTSUPP;
- }
-
- client->slave_cb = slave_cb;
-
- i2c_lock_adapter(client->adapter);
- ret = client->adapter->algo->reg_slave(client);
- i2c_unlock_adapter(client->adapter);
-
- if (ret) {
- client->slave_cb = NULL;
- dev_err(&client->dev, "%s: adapter returned error %d\n", __func__, ret);
- }
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(i2c_slave_register);
-
-int i2c_slave_unregister(struct i2c_client *client)
-{
- int ret;
-
- if (!client->adapter->algo->unreg_slave) {
- dev_err(&client->dev, "%s: not supported by adapter\n", __func__);
- return -EOPNOTSUPP;
- }
-
- i2c_lock_adapter(client->adapter);
- ret = client->adapter->algo->unreg_slave(client);
- i2c_unlock_adapter(client->adapter);
-
- if (ret == 0)
- client->slave_cb = NULL;
- else
- dev_err(&client->dev, "%s: adapter returned error %d\n", __func__, ret);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(i2c_slave_unregister);
-
-/**
- * i2c_detect_slave_mode - detect operation mode
- * @dev: The device owning the bus
- *
- * This checks the device nodes for an I2C slave by checking the address
- * used in the reg property. If the address match the I2C_OWN_SLAVE_ADDRESS
- * flag this means the device is configured to act as a I2C slave and it will
- * be listening at that address.
- *
- * Returns true if an I2C own slave address is detected, otherwise returns
- * false.
- */
-bool i2c_detect_slave_mode(struct device *dev)
-{
- if (IS_BUILTIN(CONFIG_OF) && dev->of_node) {
- struct device_node *child;
- u32 reg;
-
- for_each_child_of_node(dev->of_node, child) {
- of_property_read_u32(child, "reg", ®);
- if (reg & I2C_OWN_SLAVE_ADDRESS) {
- of_node_put(child);
- return true;
- }
- }
- } else if (IS_BUILTIN(CONFIG_ACPI) && ACPI_HANDLE(dev)) {
- dev_dbg(dev, "ACPI slave is not supported yet\n");
- }
- return false;
-}
-EXPORT_SYMBOL_GPL(i2c_detect_slave_mode);
-
-#endif
-
-MODULE_AUTHOR("Simon G. Vogl <simon@tk.uni-linz.ac.at>");
-MODULE_DESCRIPTION("I2C-Bus main module");
-MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/i2c-core.h b/drivers/i2c/i2c-core.h
index 17700bf..3b63f5e 100644
--- a/drivers/i2c/i2c-core.h
+++ b/drivers/i2c/i2c-core.h
@@ -27,3 +27,27 @@
extern struct list_head __i2c_board_list;
extern int __i2c_first_dynamic_bus_num;
+int i2c_check_addr_validity(unsigned addr, unsigned short flags);
+int i2c_check_7bit_addr_validity_strict(unsigned short addr);
+
+#ifdef CONFIG_ACPI
+void i2c_acpi_register_devices(struct i2c_adapter *adap);
+#else /* CONFIG_ACPI */
+static inline void i2c_acpi_register_devices(struct i2c_adapter *adap) { }
+#endif /* CONFIG_ACPI */
+extern struct notifier_block i2c_acpi_notifier;
+
+#ifdef CONFIG_ACPI_I2C_OPREGION
+int i2c_acpi_install_space_handler(struct i2c_adapter *adapter);
+void i2c_acpi_remove_space_handler(struct i2c_adapter *adapter);
+#else /* CONFIG_ACPI_I2C_OPREGION */
+static inline int i2c_acpi_install_space_handler(struct i2c_adapter *adapter) { return 0; }
+static inline void i2c_acpi_remove_space_handler(struct i2c_adapter *adapter) { }
+#endif /* CONFIG_ACPI_I2C_OPREGION */
+
+#ifdef CONFIG_OF
+void of_i2c_register_devices(struct i2c_adapter *adap);
+#else
+static inline void of_i2c_register_devices(struct i2c_adapter *adap) { }
+#endif
+extern struct notifier_block i2c_of_notifier;
diff --git a/drivers/i2c/i2c-stub.c b/drivers/i2c/i2c-stub.c
index 06af583..4a9ad91 100644
--- a/drivers/i2c/i2c-stub.c
+++ b/drivers/i2c/i2c-stub.c
@@ -16,6 +16,7 @@
*/
#define DEBUG 1
+#define pr_fmt(fmt) "i2c-stub: " fmt
#include <linux/errno.h>
#include <linux/i2c.h>
@@ -342,7 +343,7 @@
if (!chip->bank_words)
return -ENOMEM;
- pr_debug("i2c-stub: Allocated %u banks of %u words each (registers 0x%02x to 0x%02x)\n",
+ pr_debug("Allocated %u banks of %u words each (registers 0x%02x to 0x%02x)\n",
chip->bank_mask, chip->bank_size, chip->bank_start,
chip->bank_end);
@@ -363,28 +364,27 @@
int i, ret;
if (!chip_addr[0]) {
- pr_err("i2c-stub: Please specify a chip address\n");
+ pr_err("Please specify a chip address\n");
return -ENODEV;
}
for (i = 0; i < MAX_CHIPS && chip_addr[i]; i++) {
if (chip_addr[i] < 0x03 || chip_addr[i] > 0x77) {
- pr_err("i2c-stub: Invalid chip address 0x%02x\n",
+ pr_err("Invalid chip address 0x%02x\n",
chip_addr[i]);
return -EINVAL;
}
- pr_info("i2c-stub: Virtual chip at 0x%02x\n", chip_addr[i]);
+ pr_info("Virtual chip at 0x%02x\n", chip_addr[i]);
}
/* Allocate memory for all chips at once */
stub_chips_nr = i;
stub_chips = kcalloc(stub_chips_nr, sizeof(struct stub_chip),
GFP_KERNEL);
- if (!stub_chips) {
- pr_err("i2c-stub: Out of memory\n");
+ if (!stub_chips)
return -ENOMEM;
- }
+
for (i = 0; i < stub_chips_nr; i++) {
INIT_LIST_HEAD(&stub_chips[i].smbus_blocks);
diff --git a/drivers/ide/ide-timings.c b/drivers/ide/ide-timings.c
index 0e05f75..1858e3c 100644
--- a/drivers/ide/ide-timings.c
+++ b/drivers/ide/ide-timings.c
@@ -104,19 +104,19 @@
EXPORT_SYMBOL_GPL(ide_pio_cycle_time);
#define ENOUGH(v, unit) (((v) - 1) / (unit) + 1)
-#define EZ(v, unit) ((v) ? ENOUGH(v, unit) : 0)
+#define EZ(v, unit) ((v) ? ENOUGH((v) * 1000, unit) : 0)
static void ide_timing_quantize(struct ide_timing *t, struct ide_timing *q,
int T, int UT)
{
- q->setup = EZ(t->setup * 1000, T);
- q->act8b = EZ(t->act8b * 1000, T);
- q->rec8b = EZ(t->rec8b * 1000, T);
- q->cyc8b = EZ(t->cyc8b * 1000, T);
- q->active = EZ(t->active * 1000, T);
- q->recover = EZ(t->recover * 1000, T);
- q->cycle = EZ(t->cycle * 1000, T);
- q->udma = EZ(t->udma * 1000, UT);
+ q->setup = EZ(t->setup, T);
+ q->act8b = EZ(t->act8b, T);
+ q->rec8b = EZ(t->rec8b, T);
+ q->cyc8b = EZ(t->cyc8b, T);
+ q->active = EZ(t->active, T);
+ q->recover = EZ(t->recover, T);
+ q->cycle = EZ(t->cycle, T);
+ q->udma = EZ(t->udma, UT);
}
void ide_timing_merge(struct ide_timing *a, struct ide_timing *b,
diff --git a/drivers/infiniband/core/addr.c b/drivers/infiniband/core/addr.c
index a6cb379..01236ce 100644
--- a/drivers/infiniband/core/addr.c
+++ b/drivers/infiniband/core/addr.c
@@ -268,6 +268,7 @@
return ret;
ret = rdma_copy_addr(dev_addr, dev, NULL);
+ dev_addr->bound_dev_if = dev->ifindex;
if (vlan_id)
*vlan_id = rdma_vlan_dev_vlan_id(dev);
dev_put(dev);
@@ -280,6 +281,7 @@
&((const struct sockaddr_in6 *)addr)->sin6_addr,
dev, 1)) {
ret = rdma_copy_addr(dev_addr, dev, NULL);
+ dev_addr->bound_dev_if = dev->ifindex;
if (vlan_id)
*vlan_id = rdma_vlan_dev_vlan_id(dev);
break;
@@ -405,10 +407,10 @@
fl4.saddr = src_ip;
fl4.flowi4_oif = addr->bound_dev_if;
rt = ip_route_output_key(addr->net, &fl4);
- if (IS_ERR(rt)) {
- ret = PTR_ERR(rt);
- goto out;
- }
+ ret = PTR_ERR_OR_ZERO(rt);
+ if (ret)
+ return ret;
+
src_in->sin_family = AF_INET;
src_in->sin_addr.s_addr = fl4.saddr;
@@ -423,8 +425,6 @@
*prt = rt;
return 0;
-out:
- return ret;
}
#if IS_ENABLED(CONFIG_IPV6)
@@ -509,6 +509,11 @@
struct dst_entry *dst;
int ret;
+ if (!addr->net) {
+ pr_warn_ratelimited("%s: missing namespace\n", __func__);
+ return -EINVAL;
+ }
+
if (src_in->sa_family == AF_INET) {
struct rtable *rt = NULL;
const struct sockaddr_in *dst_in4 =
@@ -522,8 +527,12 @@
if (resolve_neigh)
ret = addr_resolve_neigh(&rt->dst, dst_in, addr, seq);
- ndev = rt->dst.dev;
- dev_hold(ndev);
+ if (addr->bound_dev_if) {
+ ndev = dev_get_by_index(addr->net, addr->bound_dev_if);
+ } else {
+ ndev = rt->dst.dev;
+ dev_hold(ndev);
+ }
ip_rt_put(rt);
} else {
@@ -539,14 +548,27 @@
if (resolve_neigh)
ret = addr_resolve_neigh(dst, dst_in, addr, seq);
- ndev = dst->dev;
- dev_hold(ndev);
+ if (addr->bound_dev_if) {
+ ndev = dev_get_by_index(addr->net, addr->bound_dev_if);
+ } else {
+ ndev = dst->dev;
+ dev_hold(ndev);
+ }
dst_release(dst);
}
- addr->bound_dev_if = ndev->ifindex;
- addr->net = dev_net(ndev);
+ if (ndev->flags & IFF_LOOPBACK) {
+ ret = rdma_translate_ip(dst_in, addr, NULL);
+ /*
+ * Put the loopback device and get the translated
+ * device instead.
+ */
+ dev_put(ndev);
+ ndev = dev_get_by_index(addr->net, addr->bound_dev_if);
+ } else {
+ addr->bound_dev_if = ndev->ifindex;
+ }
dev_put(ndev);
return ret;
diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index 31bb82d..0eb3932 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -623,22 +623,11 @@
if ((dev_type != ARPHRD_INFINIBAND) && rdma_protocol_ib(device, port))
return ret;
- if (dev_type == ARPHRD_ETHER && rdma_protocol_roce(device, port)) {
+ if (dev_type == ARPHRD_ETHER && rdma_protocol_roce(device, port))
ndev = dev_get_by_index(&init_net, bound_if_index);
- if (ndev && ndev->flags & IFF_LOOPBACK) {
- pr_info("detected loopback device\n");
- dev_put(ndev);
-
- if (!device->get_netdev)
- return -EOPNOTSUPP;
-
- ndev = device->get_netdev(device, port);
- if (!ndev)
- return -ENODEV;
- }
- } else {
+ else
gid_type = IB_GID_TYPE_IB;
- }
+
ret = ib_find_cached_gid_by_port(device, gid, gid_type, port,
ndev, NULL);
@@ -1044,6 +1033,8 @@
} else
ret = iw_cm_init_qp_attr(id_priv->cm_id.iw, qp_attr,
qp_attr_mask);
+ qp_attr->port_num = id_priv->id.port_num;
+ *qp_attr_mask |= IB_QP_PORT;
} else
ret = -ENOSYS;
@@ -2569,21 +2560,6 @@
goto err2;
}
- if (ndev->flags & IFF_LOOPBACK) {
- dev_put(ndev);
- if (!id_priv->id.device->get_netdev) {
- ret = -EOPNOTSUPP;
- goto err2;
- }
-
- ndev = id_priv->id.device->get_netdev(id_priv->id.device,
- id_priv->id.port_num);
- if (!ndev) {
- ret = -ENODEV;
- goto err2;
- }
- }
-
supported_gids = roce_gid_type_mask_support(id_priv->id.device,
id_priv->id.port_num);
gid_type = cma_route_gid_type(addr->dev_addr.network,
diff --git a/drivers/infiniband/core/roce_gid_mgmt.c b/drivers/infiniband/core/roce_gid_mgmt.c
index db958d3..94a9eef 100644
--- a/drivers/infiniband/core/roce_gid_mgmt.c
+++ b/drivers/infiniband/core/roce_gid_mgmt.c
@@ -42,6 +42,8 @@
#include <rdma/ib_cache.h>
#include <rdma/ib_addr.h>
+static struct workqueue_struct *gid_cache_wq;
+
enum gid_op_type {
GID_DEL = 0,
GID_ADD
@@ -560,7 +562,7 @@
}
INIT_WORK(&ndev_work->work, netdevice_event_work_handler);
- queue_work(ib_wq, &ndev_work->work);
+ queue_work(gid_cache_wq, &ndev_work->work);
return NOTIFY_DONE;
}
@@ -693,7 +695,7 @@
dev_hold(ndev);
work->gid_attr.ndev = ndev;
- queue_work(ib_wq, &work->work);
+ queue_work(gid_cache_wq, &work->work);
return NOTIFY_DONE;
}
@@ -740,6 +742,10 @@
int __init roce_gid_mgmt_init(void)
{
+ gid_cache_wq = alloc_ordered_workqueue("gid-cache-wq", 0);
+ if (!gid_cache_wq)
+ return -ENOMEM;
+
register_inetaddr_notifier(&nb_inetaddr);
if (IS_ENABLED(CONFIG_IPV6))
register_inet6addr_notifier(&nb_inet6addr);
@@ -764,4 +770,5 @@
* ib-core is removed, all physical devices have been removed,
* so no issue with remaining hardware contexts.
*/
+ destroy_workqueue(gid_cache_wq);
}
diff --git a/drivers/infiniband/core/uverbs_cmd.c b/drivers/infiniband/core/uverbs_cmd.c
index 8ba9bfb..2c98533 100644
--- a/drivers/infiniband/core/uverbs_cmd.c
+++ b/drivers/infiniband/core/uverbs_cmd.c
@@ -1296,7 +1296,6 @@
struct ib_uobject *uobj;
struct ib_cq *cq;
struct ib_ucq_object *obj;
- struct ib_uverbs_event_queue *ev_queue;
int ret = -EINVAL;
if (copy_from_user(&cmd, buf, sizeof cmd))
@@ -1313,7 +1312,6 @@
*/
uverbs_uobject_get(uobj);
cq = uobj->object;
- ev_queue = cq->cq_context;
obj = container_of(cq->uobject, struct ib_ucq_object, uobject);
memset(&resp, 0, sizeof(resp));
@@ -1935,7 +1933,8 @@
goto out;
}
- if (!rdma_is_port_valid(qp->device, cmd->base.port_num)) {
+ if ((cmd->base.attr_mask & IB_QP_PORT) &&
+ !rdma_is_port_valid(qp->device, cmd->base.port_num)) {
ret = -EINVAL;
goto release_qp;
}
@@ -2005,28 +2004,13 @@
rdma_ah_set_port_num(&attr->alt_ah_attr,
cmd->base.alt_dest.port_num);
- if (qp->real_qp == qp) {
- if (cmd->base.attr_mask & IB_QP_AV) {
- ret = ib_resolve_eth_dmac(qp->device, &attr->ah_attr);
- if (ret)
- goto release_qp;
- }
- ret = ib_security_modify_qp(qp,
- attr,
- modify_qp_mask(qp->qp_type,
- cmd->base.attr_mask),
- udata);
- } else {
- ret = ib_security_modify_qp(qp,
- attr,
- modify_qp_mask(qp->qp_type,
- cmd->base.attr_mask),
- NULL);
- }
+ ret = ib_modify_qp_with_udata(qp, attr,
+ modify_qp_mask(qp->qp_type,
+ cmd->base.attr_mask),
+ udata);
release_qp:
uobj_put_obj_read(qp);
-
out:
kfree(attr);
@@ -2103,7 +2087,6 @@
struct ib_uverbs_destroy_qp cmd;
struct ib_uverbs_destroy_qp_resp resp;
struct ib_uobject *uobj;
- struct ib_qp *qp;
struct ib_uqp_object *obj;
int ret = -EINVAL;
@@ -2117,7 +2100,6 @@
if (IS_ERR(uobj))
return PTR_ERR(uobj);
- qp = uobj->object;
obj = container_of(uobj, struct ib_uqp_object, uevent.uobject);
/*
* Make sure we don't free the memory in remove_commit as we still
@@ -3019,7 +3001,6 @@
{
struct ib_uverbs_ex_destroy_wq cmd = {};
struct ib_uverbs_ex_destroy_wq_resp resp = {};
- struct ib_wq *wq;
struct ib_uobject *uobj;
struct ib_uwq_object *obj;
size_t required_cmd_sz;
@@ -3053,7 +3034,6 @@
if (IS_ERR(uobj))
return PTR_ERR(uobj);
- wq = uobj->object;
obj = container_of(uobj, struct ib_uwq_object, uevent.uobject);
/*
* Make sure we don't free the memory in remove_commit as we still
@@ -3743,10 +3723,8 @@
struct ib_uverbs_destroy_srq cmd;
struct ib_uverbs_destroy_srq_resp resp;
struct ib_uobject *uobj;
- struct ib_srq *srq;
struct ib_uevent_object *obj;
int ret = -EINVAL;
- enum ib_srq_type srq_type;
if (copy_from_user(&cmd, buf, sizeof cmd))
return -EFAULT;
@@ -3756,9 +3734,7 @@
if (IS_ERR(uobj))
return PTR_ERR(uobj);
- srq = uobj->object;
obj = container_of(uobj, struct ib_uevent_object, uobject);
- srq_type = srq->srq_type;
/*
* Make sure we don't free the memory in remove_commit as we still
* needs the uobject memory to create the response.
diff --git a/drivers/infiniband/core/verbs.c b/drivers/infiniband/core/verbs.c
index c973a83c..fb98ed6 100644
--- a/drivers/infiniband/core/verbs.c
+++ b/drivers/infiniband/core/verbs.c
@@ -452,6 +452,19 @@
}
EXPORT_SYMBOL(ib_get_gids_from_rdma_hdr);
+/*
+ * This function creates ah from the incoming packet.
+ * Incoming packet has dgid of the receiver node on which this code is
+ * getting executed and, sgid contains the GID of the sender.
+ *
+ * When resolving mac address of destination, the arrived dgid is used
+ * as sgid and, sgid is used as dgid because sgid contains destinations
+ * GID whom to respond to.
+ *
+ * This is why when calling rdma_addr_find_l2_eth_by_grh() function, the
+ * position of arguments dgid and sgid do not match the order of the
+ * parameters.
+ */
int ib_init_ah_from_wc(struct ib_device *device, u8 port_num,
const struct ib_wc *wc, const struct ib_grh *grh,
struct rdma_ah_attr *ah_attr)
@@ -507,11 +520,6 @@
}
resolved_dev = dev_get_by_index(&init_net, if_index);
- if (resolved_dev->flags & IFF_LOOPBACK) {
- dev_put(resolved_dev);
- resolved_dev = idev;
- dev_hold(resolved_dev);
- }
rcu_read_lock();
if (resolved_dev != idev && !rdma_is_upper_dev_rcu(idev,
resolved_dev))
@@ -887,6 +895,7 @@
} qp_state_table[IB_QPS_ERR + 1][IB_QPS_ERR + 1] = {
[IB_QPS_RESET] = {
[IB_QPS_RESET] = { .valid = 1 },
+ [IB_QPS_ERR] = { .valid = 1 },
[IB_QPS_INIT] = {
.valid = 1,
.req_param = {
@@ -1268,20 +1277,36 @@
}
EXPORT_SYMBOL(ib_resolve_eth_dmac);
+/**
+ * ib_modify_qp_with_udata - Modifies the attributes for the specified QP.
+ * @qp: The QP to modify.
+ * @attr: On input, specifies the QP attributes to modify. On output,
+ * the current values of selected QP attributes are returned.
+ * @attr_mask: A bit-mask used to specify which attributes of the QP
+ * are being modified.
+ * @udata: pointer to user's input output buffer information
+ * are being modified.
+ * It returns 0 on success and returns appropriate error code on error.
+ */
+int ib_modify_qp_with_udata(struct ib_qp *qp, struct ib_qp_attr *attr,
+ int attr_mask, struct ib_udata *udata)
+{
+ int ret;
+
+ if (attr_mask & IB_QP_AV) {
+ ret = ib_resolve_eth_dmac(qp->device, &attr->ah_attr);
+ if (ret)
+ return ret;
+ }
+ return ib_security_modify_qp(qp, attr, attr_mask, udata);
+}
+EXPORT_SYMBOL(ib_modify_qp_with_udata);
+
int ib_modify_qp(struct ib_qp *qp,
struct ib_qp_attr *qp_attr,
int qp_attr_mask)
{
-
- if (qp_attr_mask & IB_QP_AV) {
- int ret;
-
- ret = ib_resolve_eth_dmac(qp->device, &qp_attr->ah_attr);
- if (ret)
- return ret;
- }
-
- return ib_security_modify_qp(qp->real_qp, qp_attr, qp_attr_mask, NULL);
+ return ib_modify_qp_with_udata(qp, qp_attr, qp_attr_mask, NULL);
}
EXPORT_SYMBOL(ib_modify_qp);
diff --git a/drivers/infiniband/hw/bnxt_re/bnxt_re.h b/drivers/infiniband/hw/bnxt_re/bnxt_re.h
index 0877283..8552753 100644
--- a/drivers/infiniband/hw/bnxt_re/bnxt_re.h
+++ b/drivers/infiniband/hw/bnxt_re/bnxt_re.h
@@ -51,6 +51,8 @@
#define BNXT_RE_PAGE_SIZE_8M BIT(23)
#define BNXT_RE_PAGE_SIZE_1G BIT(30)
+#define BNXT_RE_MAX_MR_SIZE BIT(30)
+
#define BNXT_RE_MAX_QPC_COUNT (64 * 1024)
#define BNXT_RE_MAX_MRW_COUNT (64 * 1024)
#define BNXT_RE_MAX_SRQC_COUNT (64 * 1024)
@@ -60,6 +62,13 @@
#define BNXT_RE_RQ_WQE_THRESHOLD 32
+/*
+ * Setting the default ack delay value to 16, which means
+ * the default timeout is approx. 260ms(4 usec * 2 ^(timeout))
+ */
+
+#define BNXT_RE_DEFAULT_ACK_DELAY 16
+
struct bnxt_re_work {
struct work_struct work;
unsigned long event;
diff --git a/drivers/infiniband/hw/bnxt_re/ib_verbs.c b/drivers/infiniband/hw/bnxt_re/ib_verbs.c
index c7bd683..f0e01b3 100644
--- a/drivers/infiniband/hw/bnxt_re/ib_verbs.c
+++ b/drivers/infiniband/hw/bnxt_re/ib_verbs.c
@@ -145,10 +145,8 @@
ib_attr->fw_ver = (u64)(unsigned long)(dev_attr->fw_ver);
bnxt_qplib_get_guid(rdev->netdev->dev_addr,
(u8 *)&ib_attr->sys_image_guid);
- ib_attr->max_mr_size = ~0ull;
- ib_attr->page_size_cap = BNXT_RE_PAGE_SIZE_4K | BNXT_RE_PAGE_SIZE_8K |
- BNXT_RE_PAGE_SIZE_64K | BNXT_RE_PAGE_SIZE_2M |
- BNXT_RE_PAGE_SIZE_8M | BNXT_RE_PAGE_SIZE_1G;
+ ib_attr->max_mr_size = BNXT_RE_MAX_MR_SIZE;
+ ib_attr->page_size_cap = BNXT_RE_PAGE_SIZE_4K;
ib_attr->vendor_id = rdev->en_dev->pdev->vendor;
ib_attr->vendor_part_id = rdev->en_dev->pdev->device;
@@ -174,9 +172,11 @@
ib_attr->max_mr = dev_attr->max_mr;
ib_attr->max_pd = dev_attr->max_pd;
ib_attr->max_qp_rd_atom = dev_attr->max_qp_rd_atom;
- ib_attr->max_qp_init_rd_atom = dev_attr->max_qp_rd_atom;
- ib_attr->atomic_cap = IB_ATOMIC_HCA;
- ib_attr->masked_atomic_cap = IB_ATOMIC_HCA;
+ ib_attr->max_qp_init_rd_atom = dev_attr->max_qp_init_rd_atom;
+ if (dev_attr->is_atomic) {
+ ib_attr->atomic_cap = IB_ATOMIC_HCA;
+ ib_attr->masked_atomic_cap = IB_ATOMIC_HCA;
+ }
ib_attr->max_ee_rd_atom = 0;
ib_attr->max_res_rd_atom = 0;
@@ -201,7 +201,7 @@
ib_attr->max_fast_reg_page_list_len = MAX_PBL_LVL_1_PGS;
ib_attr->max_pkeys = 1;
- ib_attr->local_ca_ack_delay = 0;
+ ib_attr->local_ca_ack_delay = BNXT_RE_DEFAULT_ACK_DELAY;
return 0;
}
@@ -390,15 +390,17 @@
return -EINVAL;
ctx->refcnt--;
if (!ctx->refcnt) {
- rc = bnxt_qplib_del_sgid
- (sgid_tbl,
- &sgid_tbl->tbl[ctx->idx], true);
- if (rc)
+ rc = bnxt_qplib_del_sgid(sgid_tbl,
+ &sgid_tbl->tbl[ctx->idx],
+ true);
+ if (rc) {
dev_err(rdev_to_dev(rdev),
"Failed to remove GID: %#x", rc);
- ctx_tbl = sgid_tbl->ctx;
- ctx_tbl[ctx->idx] = NULL;
- kfree(ctx);
+ } else {
+ ctx_tbl = sgid_tbl->ctx;
+ ctx_tbl[ctx->idx] = NULL;
+ kfree(ctx);
+ }
}
} else {
return -EINVAL;
@@ -588,10 +590,10 @@
/* Create a fence MW only for kernel consumers */
mw = bnxt_re_alloc_mw(&pd->ib_pd, IB_MW_TYPE_1, NULL);
- if (!mw) {
+ if (IS_ERR(mw)) {
dev_err(rdev_to_dev(rdev),
"Failed to create fence-MW for PD: %p\n", pd);
- rc = -EINVAL;
+ rc = PTR_ERR(mw);
goto fail;
}
fence->mw = mw;
@@ -612,30 +614,13 @@
int rc;
bnxt_re_destroy_fence_mr(pd);
- if (ib_pd->uobject && pd->dpi.dbr) {
- struct ib_ucontext *ib_uctx = ib_pd->uobject->context;
- struct bnxt_re_ucontext *ucntx;
- /* Free DPI only if this is the first PD allocated by the
- * application and mark the context dpi as NULL
- */
- ucntx = container_of(ib_uctx, struct bnxt_re_ucontext, ib_uctx);
-
- rc = bnxt_qplib_dealloc_dpi(&rdev->qplib_res,
- &rdev->qplib_res.dpi_tbl,
- &pd->dpi);
+ if (pd->qplib_pd.id) {
+ rc = bnxt_qplib_dealloc_pd(&rdev->qplib_res,
+ &rdev->qplib_res.pd_tbl,
+ &pd->qplib_pd);
if (rc)
- dev_err(rdev_to_dev(rdev), "Failed to deallocate HW DPI");
- /* Don't fail, continue*/
- ucntx->dpi = NULL;
- }
-
- rc = bnxt_qplib_dealloc_pd(&rdev->qplib_res,
- &rdev->qplib_res.pd_tbl,
- &pd->qplib_pd);
- if (rc) {
- dev_err(rdev_to_dev(rdev), "Failed to deallocate HW PD");
- return rc;
+ dev_err(rdev_to_dev(rdev), "Failed to deallocate HW PD");
}
kfree(pd);
@@ -667,23 +652,22 @@
if (udata) {
struct bnxt_re_pd_resp resp;
- if (!ucntx->dpi) {
+ if (!ucntx->dpi.dbr) {
/* Allocate DPI in alloc_pd to avoid failing of
* ibv_devinfo and family of application when DPIs
* are depleted.
*/
if (bnxt_qplib_alloc_dpi(&rdev->qplib_res.dpi_tbl,
- &pd->dpi, ucntx)) {
+ &ucntx->dpi, ucntx)) {
rc = -ENOMEM;
goto dbfail;
}
- ucntx->dpi = &pd->dpi;
}
resp.pdid = pd->qplib_pd.id;
/* Still allow mapping this DBR to the new user PD. */
- resp.dpi = ucntx->dpi->dpi;
- resp.dbr = (u64)ucntx->dpi->umdbr;
+ resp.dpi = ucntx->dpi.dpi;
+ resp.dbr = (u64)ucntx->dpi.umdbr;
rc = ib_copy_to_udata(udata, &resp, sizeof(resp));
if (rc) {
@@ -960,7 +944,7 @@
qplib_qp->rq.nmap = umem->nmap;
}
- qplib_qp->dpi = cntx->dpi;
+ qplib_qp->dpi = &cntx->dpi;
return 0;
rqfail:
ib_umem_release(qp->sumem);
@@ -1530,13 +1514,24 @@
if (qp_attr_mask & IB_QP_MAX_QP_RD_ATOMIC) {
qp->qplib_qp.modify_flags |=
CMDQ_MODIFY_QP_MODIFY_MASK_MAX_RD_ATOMIC;
- qp->qplib_qp.max_rd_atomic = qp_attr->max_rd_atomic;
+ /* Cap the max_rd_atomic to device max */
+ qp->qplib_qp.max_rd_atomic = min_t(u32, qp_attr->max_rd_atomic,
+ dev_attr->max_qp_rd_atom);
}
if (qp_attr_mask & IB_QP_SQ_PSN) {
qp->qplib_qp.modify_flags |= CMDQ_MODIFY_QP_MODIFY_MASK_SQ_PSN;
qp->qplib_qp.sq.psn = qp_attr->sq_psn;
}
if (qp_attr_mask & IB_QP_MAX_DEST_RD_ATOMIC) {
+ if (qp_attr->max_dest_rd_atomic >
+ dev_attr->max_qp_init_rd_atom) {
+ dev_err(rdev_to_dev(rdev),
+ "max_dest_rd_atomic requested%d is > dev_max%d",
+ qp_attr->max_dest_rd_atomic,
+ dev_attr->max_qp_init_rd_atom);
+ return -EINVAL;
+ }
+
qp->qplib_qp.modify_flags |=
CMDQ_MODIFY_QP_MODIFY_MASK_MAX_DEST_RD_ATOMIC;
qp->qplib_qp.max_dest_rd_atomic = qp_attr->max_dest_rd_atomic;
@@ -2403,7 +2398,7 @@
}
cq->qplib_cq.sghead = cq->umem->sg_head.sgl;
cq->qplib_cq.nmap = cq->umem->nmap;
- cq->qplib_cq.dpi = uctx->dpi;
+ cq->qplib_cq.dpi = &uctx->dpi;
} else {
cq->max_cql = min_t(u32, entries, MAX_CQL_PER_POLL);
cq->cql = kcalloc(cq->max_cql, sizeof(struct bnxt_qplib_cqe),
@@ -2905,6 +2900,7 @@
spin_lock_irqsave(&cq->cq_lock, flags);
budget = min_t(u32, num_entries, cq->max_cql);
+ num_entries = budget;
if (!cq->cql) {
dev_err(rdev_to_dev(cq->rdev), "POLL CQ : no CQL to use");
goto exit;
@@ -3031,6 +3027,11 @@
else if (ib_cqn_flags & IB_CQ_SOLICITED)
type = DBR_DBR_TYPE_CQ_ARMSE;
+ /* Poll to see if there are missed events */
+ if ((ib_cqn_flags & IB_CQ_REPORT_MISSED_EVENTS) &&
+ !(bnxt_qplib_is_cq_empty(&cq->qplib_cq)))
+ return 1;
+
bnxt_qplib_req_notify_cq(&cq->qplib_cq, type);
return 0;
@@ -3245,6 +3246,12 @@
struct scatterlist *sg;
int entry;
+ if (length > BNXT_RE_MAX_MR_SIZE) {
+ dev_err(rdev_to_dev(rdev), "MR Size: %lld > Max supported:%ld\n",
+ length, BNXT_RE_MAX_MR_SIZE);
+ return ERR_PTR(-ENOMEM);
+ }
+
mr = kzalloc(sizeof(*mr), GFP_KERNEL);
if (!mr)
return ERR_PTR(-ENOMEM);
@@ -3388,8 +3395,26 @@
struct bnxt_re_ucontext *uctx = container_of(ib_uctx,
struct bnxt_re_ucontext,
ib_uctx);
+
+ struct bnxt_re_dev *rdev = uctx->rdev;
+ int rc = 0;
+
if (uctx->shpg)
free_page((unsigned long)uctx->shpg);
+
+ if (uctx->dpi.dbr) {
+ /* Free DPI only if this is the first PD allocated by the
+ * application and mark the context dpi as NULL
+ */
+ rc = bnxt_qplib_dealloc_dpi(&rdev->qplib_res,
+ &rdev->qplib_res.dpi_tbl,
+ &uctx->dpi);
+ if (rc)
+ dev_err(rdev_to_dev(rdev), "Deallocte HW DPI failed!");
+ /* Don't fail, continue*/
+ uctx->dpi.dbr = NULL;
+ }
+
kfree(uctx);
return 0;
}
diff --git a/drivers/infiniband/hw/bnxt_re/ib_verbs.h b/drivers/infiniband/hw/bnxt_re/ib_verbs.h
index 6c160f6..a0bb7e3 100644
--- a/drivers/infiniband/hw/bnxt_re/ib_verbs.h
+++ b/drivers/infiniband/hw/bnxt_re/ib_verbs.h
@@ -59,7 +59,6 @@
struct bnxt_re_dev *rdev;
struct ib_pd ib_pd;
struct bnxt_qplib_pd qplib_pd;
- struct bnxt_qplib_dpi dpi;
struct bnxt_re_fence_data fence;
};
@@ -127,7 +126,7 @@
struct bnxt_re_ucontext {
struct bnxt_re_dev *rdev;
struct ib_ucontext ib_uctx;
- struct bnxt_qplib_dpi *dpi;
+ struct bnxt_qplib_dpi dpi;
void *shpg;
spinlock_t sh_lock; /* protect shpg */
};
diff --git a/drivers/infiniband/hw/bnxt_re/main.c b/drivers/infiniband/hw/bnxt_re/main.c
index 1fce5e7..ceae2d9 100644
--- a/drivers/infiniband/hw/bnxt_re/main.c
+++ b/drivers/infiniband/hw/bnxt_re/main.c
@@ -333,6 +333,7 @@
bnxt_re_init_hwrm_hdr(rdev, (void *)&req, HWRM_STAT_CTX_ALLOC, -1, -1);
req.update_period_ms = cpu_to_le32(1000);
req.stats_dma_addr = cpu_to_le64(dma_map);
+ req.stat_ctx_flags = STAT_CTX_ALLOC_REQ_STAT_CTX_FLAGS_ROCE;
bnxt_re_fill_fw_msg(&fw_msg, (void *)&req, sizeof(req), (void *)&resp,
sizeof(resp), DFLT_HWRM_CMD_TIMEOUT);
rc = en_dev->en_ops->bnxt_send_fw_msg(en_dev, BNXT_ROCE_ULP, &fw_msg);
diff --git a/drivers/infiniband/hw/bnxt_re/qplib_fp.c b/drivers/infiniband/hw/bnxt_re/qplib_fp.c
index f05500bc..9af1514 100644
--- a/drivers/infiniband/hw/bnxt_re/qplib_fp.c
+++ b/drivers/infiniband/hw/bnxt_re/qplib_fp.c
@@ -1128,6 +1128,11 @@
}
/* Each SGE entry = 1 WQE size16 */
wqe_size16 = wqe->num_sge;
+ /* HW requires wqe size has room for atleast one SGE even if
+ * none was supplied by ULP
+ */
+ if (!wqe->num_sge)
+ wqe_size16++;
}
/* Specifics */
@@ -1364,6 +1369,11 @@
rqe->flags = wqe->flags;
rqe->wqe_size = wqe->num_sge +
((offsetof(typeof(*rqe), data) + 15) >> 4);
+ /* HW requires wqe size has room for atleast one SGE even if none
+ * was supplied by ULP
+ */
+ if (!wqe->num_sge)
+ rqe->wqe_size++;
/* Supply the rqe->wr_id index to the wr_id_tbl for now */
rqe->wr_id[0] = cpu_to_le32(sw_prod);
@@ -1885,6 +1895,25 @@
return rc;
}
+bool bnxt_qplib_is_cq_empty(struct bnxt_qplib_cq *cq)
+{
+ struct cq_base *hw_cqe, **hw_cqe_ptr;
+ unsigned long flags;
+ u32 sw_cons, raw_cons;
+ bool rc = true;
+
+ spin_lock_irqsave(&cq->hwq.lock, flags);
+ raw_cons = cq->hwq.cons;
+ sw_cons = HWQ_CMP(raw_cons, &cq->hwq);
+ hw_cqe_ptr = (struct cq_base **)cq->hwq.pbl_ptr;
+ hw_cqe = &hw_cqe_ptr[CQE_PG(sw_cons)][CQE_IDX(sw_cons)];
+
+ /* Check for Valid bit. If the CQE is valid, return false */
+ rc = !CQE_CMP_VALID(hw_cqe, raw_cons, cq->hwq.max_elements);
+ spin_unlock_irqrestore(&cq->hwq.lock, flags);
+ return rc;
+}
+
static int bnxt_qplib_cq_process_res_raweth_qp1(struct bnxt_qplib_cq *cq,
struct cq_res_raweth_qp1 *hwcqe,
struct bnxt_qplib_cqe **pcqe,
diff --git a/drivers/infiniband/hw/bnxt_re/qplib_fp.h b/drivers/infiniband/hw/bnxt_re/qplib_fp.h
index 36b7b7d..19176e0 100644
--- a/drivers/infiniband/hw/bnxt_re/qplib_fp.h
+++ b/drivers/infiniband/hw/bnxt_re/qplib_fp.h
@@ -449,6 +449,7 @@
int bnxt_qplib_destroy_cq(struct bnxt_qplib_res *res, struct bnxt_qplib_cq *cq);
int bnxt_qplib_poll_cq(struct bnxt_qplib_cq *cq, struct bnxt_qplib_cqe *cqe,
int num, struct bnxt_qplib_qp **qp);
+bool bnxt_qplib_is_cq_empty(struct bnxt_qplib_cq *cq);
void bnxt_qplib_req_notify_cq(struct bnxt_qplib_cq *cq, u32 arm_type);
void bnxt_qplib_free_nq(struct bnxt_qplib_nq *nq);
int bnxt_qplib_alloc_nq(struct pci_dev *pdev, struct bnxt_qplib_nq *nq);
diff --git a/drivers/infiniband/hw/bnxt_re/qplib_sp.c b/drivers/infiniband/hw/bnxt_re/qplib_sp.c
index fde18cf..ef91ab7 100644
--- a/drivers/infiniband/hw/bnxt_re/qplib_sp.c
+++ b/drivers/infiniband/hw/bnxt_re/qplib_sp.c
@@ -51,6 +51,19 @@
0, 0, 0, 0, 0, 0, 0, 0 } };
/* Device */
+
+static bool bnxt_qplib_is_atomic_cap(struct bnxt_qplib_rcfw *rcfw)
+{
+ int rc;
+ u16 pcie_ctl2;
+
+ rc = pcie_capability_read_word(rcfw->pdev, PCI_EXP_DEVCTL2,
+ &pcie_ctl2);
+ if (rc)
+ return false;
+ return !!(pcie_ctl2 & PCI_EXP_DEVCTL2_ATOMIC_REQ);
+}
+
int bnxt_qplib_get_dev_attr(struct bnxt_qplib_rcfw *rcfw,
struct bnxt_qplib_dev_attr *attr)
{
@@ -81,6 +94,8 @@
/* Extract the context from the side buffer */
attr->max_qp = le32_to_cpu(sb->max_qp);
+ /* max_qp value reported by FW for PF doesn't include the QP1 for PF */
+ attr->max_qp += 1;
attr->max_qp_rd_atom =
sb->max_qp_rd_atom > BNXT_QPLIB_MAX_OUT_RD_ATOM ?
BNXT_QPLIB_MAX_OUT_RD_ATOM : sb->max_qp_rd_atom;
@@ -129,6 +144,7 @@
attr->tqm_alloc_reqs[i * 4 + 3] = *(++tqm_alloc);
}
+ attr->is_atomic = bnxt_qplib_is_atomic_cap(rcfw);
bail:
bnxt_qplib_rcfw_free_sbuf(rcfw, sbuf);
return rc;
diff --git a/drivers/infiniband/hw/bnxt_re/qplib_sp.h b/drivers/infiniband/hw/bnxt_re/qplib_sp.h
index a543f95..2ce7e2a 100644
--- a/drivers/infiniband/hw/bnxt_re/qplib_sp.h
+++ b/drivers/infiniband/hw/bnxt_re/qplib_sp.h
@@ -42,6 +42,8 @@
#define BNXT_QPLIB_RESERVED_QP_WRS 128
+#define PCI_EXP_DEVCTL2_ATOMIC_REQ 0x0040
+
struct bnxt_qplib_dev_attr {
char fw_ver[32];
u16 max_sgid;
@@ -70,6 +72,7 @@
u32 max_inline_data;
u32 l2_db_size;
u8 tqm_alloc_reqs[MAX_TQM_ALLOC_REQ];
+ bool is_atomic;
};
struct bnxt_qplib_pd {
diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c
index 29d3074..0cd0c1f 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_provider.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c
@@ -718,7 +718,7 @@
struct iwch_mr *mhp;
u32 mmid;
u32 stag = 0;
- int ret = 0;
+ int ret = -ENOMEM;
if (mr_type != IB_MR_TYPE_MEM_REG ||
max_num_sg > T3_MAX_FASTREG_DEPTH)
@@ -731,10 +731,8 @@
goto err;
mhp->pages = kcalloc(max_num_sg, sizeof(u64), GFP_KERNEL);
- if (!mhp->pages) {
- ret = -ENOMEM;
+ if (!mhp->pages)
goto pl_err;
- }
mhp->rhp = rhp;
ret = iwch_alloc_pbl(mhp, max_num_sg);
@@ -751,7 +749,8 @@
mhp->attr.state = 1;
mmid = (stag) >> 8;
mhp->ibmr.rkey = mhp->ibmr.lkey = stag;
- if (insert_handle(rhp, &rhp->mmidr, mhp, mmid))
+ ret = insert_handle(rhp, &rhp->mmidr, mhp, mmid);
+ if (ret)
goto err3;
pr_debug("%s mmid 0x%x mhp %p stag 0x%x\n", __func__, mmid, mhp, stag);
diff --git a/drivers/infiniband/hw/cxgb4/cq.c b/drivers/infiniband/hw/cxgb4/cq.c
index e16fcaf..be07da1 100644
--- a/drivers/infiniband/hw/cxgb4/cq.c
+++ b/drivers/infiniband/hw/cxgb4/cq.c
@@ -963,6 +963,7 @@
goto err3;
if (ucontext) {
+ ret = -ENOMEM;
mm = kmalloc(sizeof *mm, GFP_KERNEL);
if (!mm)
goto err4;
diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c
index bfc7759..cb7fc0d 100644
--- a/drivers/infiniband/hw/cxgb4/qp.c
+++ b/drivers/infiniband/hw/cxgb4/qp.c
@@ -569,7 +569,7 @@
{
if (wr->num_sge > 1)
return -EINVAL;
- if (wr->num_sge) {
+ if (wr->num_sge && wr->sg_list[0].length) {
wqe->read.stag_src = cpu_to_be32(rdma_wr(wr)->rkey);
wqe->read.to_src_hi = cpu_to_be32((u32)(rdma_wr(wr)->remote_addr
>> 32));
diff --git a/drivers/infiniband/hw/hfi1/chip.c b/drivers/infiniband/hw/hfi1/chip.c
index 2ba00b8..94b54850 100644
--- a/drivers/infiniband/hw/hfi1/chip.c
+++ b/drivers/infiniband/hw/hfi1/chip.c
@@ -12847,7 +12847,12 @@
/* clear from the handled mask of the general interrupt */
m = isrc / 64;
n = isrc % 64;
- dd->gi_mask[m] &= ~((u64)1 << n);
+ if (likely(m < CCE_NUM_INT_CSRS)) {
+ dd->gi_mask[m] &= ~((u64)1 << n);
+ } else {
+ dd_dev_err(dd, "remap interrupt err\n");
+ return;
+ }
/* direct the chip source to the given MSI-X interrupt */
m = isrc / 8;
diff --git a/drivers/infiniband/hw/hfi1/qp.c b/drivers/infiniband/hw/hfi1/qp.c
index 650305c..1a7af9f 100644
--- a/drivers/infiniband/hw/hfi1/qp.c
+++ b/drivers/infiniband/hw/hfi1/qp.c
@@ -647,18 +647,17 @@
qp->pid);
}
-void *qp_priv_alloc(struct rvt_dev_info *rdi, struct rvt_qp *qp,
- gfp_t gfp)
+void *qp_priv_alloc(struct rvt_dev_info *rdi, struct rvt_qp *qp)
{
struct hfi1_qp_priv *priv;
- priv = kzalloc_node(sizeof(*priv), gfp, rdi->dparms.node);
+ priv = kzalloc_node(sizeof(*priv), GFP_KERNEL, rdi->dparms.node);
if (!priv)
return ERR_PTR(-ENOMEM);
priv->owner = qp;
- priv->s_ahg = kzalloc_node(sizeof(*priv->s_ahg), gfp,
+ priv->s_ahg = kzalloc_node(sizeof(*priv->s_ahg), GFP_KERNEL,
rdi->dparms.node);
if (!priv->s_ahg) {
kfree(priv);
diff --git a/drivers/infiniband/hw/hfi1/qp.h b/drivers/infiniband/hw/hfi1/qp.h
index 1eb9cd7..6fe542b 100644
--- a/drivers/infiniband/hw/hfi1/qp.h
+++ b/drivers/infiniband/hw/hfi1/qp.h
@@ -123,8 +123,7 @@
/*
* Functions provided by hfi1 driver for rdmavt to use
*/
-void *qp_priv_alloc(struct rvt_dev_info *rdi, struct rvt_qp *qp,
- gfp_t gfp);
+void *qp_priv_alloc(struct rvt_dev_info *rdi, struct rvt_qp *qp);
void qp_priv_free(struct rvt_dev_info *rdi, struct rvt_qp *qp);
unsigned free_all_qps(struct rvt_dev_info *rdi);
void notify_qp_reset(struct rvt_qp *qp);
diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v1.c b/drivers/infiniband/hw/hns/hns_roce_hw_v1.c
index 37d5d29..23fad6d 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v1.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v1.c
@@ -228,14 +228,14 @@
switch (wr->opcode) {
case IB_WR_RDMA_READ:
ps_opcode = HNS_ROCE_WQE_OPCODE_RDMA_READ;
- set_raddr_seg(wqe, atomic_wr(wr)->remote_addr,
- atomic_wr(wr)->rkey);
+ set_raddr_seg(wqe, rdma_wr(wr)->remote_addr,
+ rdma_wr(wr)->rkey);
break;
case IB_WR_RDMA_WRITE:
case IB_WR_RDMA_WRITE_WITH_IMM:
ps_opcode = HNS_ROCE_WQE_OPCODE_RDMA_WRITE;
- set_raddr_seg(wqe, atomic_wr(wr)->remote_addr,
- atomic_wr(wr)->rkey);
+ set_raddr_seg(wqe, rdma_wr(wr)->remote_addr,
+ rdma_wr(wr)->rkey);
break;
case IB_WR_SEND:
case IB_WR_SEND_WITH_INV:
@@ -661,9 +661,11 @@
union ib_gid dgid;
u64 subnet_prefix;
int attr_mask = 0;
- int i;
+ int i, j;
int ret;
+ u8 queue_en[HNS_ROCE_V1_RESV_QP] = { 0 };
u8 phy_port;
+ u8 port = 0;
u8 sl;
priv = (struct hns_roce_v1_priv *)hr_dev->hw->priv;
@@ -709,11 +711,27 @@
attr.rnr_retry = 7;
attr.timeout = 0x12;
attr.path_mtu = IB_MTU_256;
+ attr.ah_attr.type = RDMA_AH_ATTR_TYPE_ROCE;
rdma_ah_set_grh(&attr.ah_attr, NULL, 0, 0, 1, 0);
rdma_ah_set_static_rate(&attr.ah_attr, 3);
subnet_prefix = cpu_to_be64(0xfe80000000000000LL);
for (i = 0; i < HNS_ROCE_V1_RESV_QP; i++) {
+ phy_port = (i >= HNS_ROCE_MAX_PORTS) ? (i - 2) :
+ (i % HNS_ROCE_MAX_PORTS);
+ sl = i / HNS_ROCE_MAX_PORTS;
+
+ for (j = 0; j < caps->num_ports; j++) {
+ if (hr_dev->iboe.phy_port[j] == phy_port) {
+ queue_en[i] = 1;
+ port = j;
+ break;
+ }
+ }
+
+ if (!queue_en[i])
+ continue;
+
free_mr->mr_free_qp[i] = hns_roce_v1_create_lp_qp(hr_dev, pd);
if (IS_ERR(free_mr->mr_free_qp[i])) {
dev_err(dev, "Create loop qp failed!\n");
@@ -721,15 +739,7 @@
}
hr_qp = free_mr->mr_free_qp[i];
- sl = i / caps->num_ports;
-
- if (caps->num_ports == HNS_ROCE_MAX_PORTS)
- phy_port = (i >= HNS_ROCE_MAX_PORTS) ? (i - 2) :
- (i % caps->num_ports);
- else
- phy_port = i % caps->num_ports;
-
- hr_qp->port = phy_port + 1;
+ hr_qp->port = port;
hr_qp->phy_port = phy_port;
hr_qp->ibqp.qp_type = IB_QPT_RC;
hr_qp->ibqp.device = &hr_dev->ib_dev;
@@ -739,23 +749,22 @@
hr_qp->ibqp.recv_cq = cq;
hr_qp->ibqp.send_cq = cq;
- rdma_ah_set_port_num(&attr.ah_attr, phy_port + 1);
- rdma_ah_set_sl(&attr.ah_attr, phy_port + 1);
- attr.port_num = phy_port + 1;
+ rdma_ah_set_port_num(&attr.ah_attr, port + 1);
+ rdma_ah_set_sl(&attr.ah_attr, sl);
+ attr.port_num = port + 1;
attr.dest_qp_num = hr_qp->qpn;
memcpy(rdma_ah_retrieve_dmac(&attr.ah_attr),
- hr_dev->dev_addr[phy_port],
+ hr_dev->dev_addr[port],
MAC_ADDR_OCTET_NUM);
memcpy(&dgid.raw, &subnet_prefix, sizeof(u64));
- memcpy(&dgid.raw[8], hr_dev->dev_addr[phy_port], 3);
- memcpy(&dgid.raw[13], hr_dev->dev_addr[phy_port] + 3, 3);
+ memcpy(&dgid.raw[8], hr_dev->dev_addr[port], 3);
+ memcpy(&dgid.raw[13], hr_dev->dev_addr[port] + 3, 3);
dgid.raw[11] = 0xff;
dgid.raw[12] = 0xfe;
dgid.raw[8] ^= 2;
rdma_ah_set_dgid_raw(&attr.ah_attr, dgid.raw);
- attr_mask |= IB_QP_PORT;
ret = hr_dev->hw->modify_qp(&hr_qp->ibqp, &attr, attr_mask,
IB_QPS_RESET, IB_QPS_INIT);
@@ -812,6 +821,9 @@
for (i = 0; i < HNS_ROCE_V1_RESV_QP; i++) {
hr_qp = free_mr->mr_free_qp[i];
+ if (!hr_qp)
+ continue;
+
ret = hns_roce_v1_destroy_qp(&hr_qp->ibqp);
if (ret)
dev_err(dev, "Destroy qp %d for mr free failed(%d)!\n",
@@ -963,7 +975,7 @@
msecs_to_jiffies(HNS_ROCE_V1_FREE_MR_TIMEOUT_MSECS) + jiffies;
int i;
int ret;
- int ne;
+ int ne = 0;
mr_work = container_of(work, struct hns_roce_mr_free_work, work);
hr_mr = (struct hns_roce_mr *)mr_work->mr;
@@ -976,6 +988,10 @@
for (i = 0; i < HNS_ROCE_V1_RESV_QP; i++) {
hr_qp = free_mr->mr_free_qp[i];
+ if (!hr_qp)
+ continue;
+ ne++;
+
ret = hns_roce_v1_send_lp_wqe(hr_qp);
if (ret) {
dev_err(dev,
@@ -985,7 +1001,6 @@
}
}
- ne = HNS_ROCE_V1_RESV_QP;
do {
ret = hns_roce_v1_poll_cq(&mr_free_cq->ib_cq, ne, wc);
if (ret < 0) {
@@ -995,7 +1010,8 @@
goto free_work;
}
ne -= ret;
- msleep(HNS_ROCE_V1_FREE_MR_WAIT_VALUE);
+ usleep_range(HNS_ROCE_V1_FREE_MR_WAIT_VALUE * 1000,
+ (1 + HNS_ROCE_V1_FREE_MR_WAIT_VALUE) * 1000);
} while (ne && time_before_eq(jiffies, end));
if (ne != 0)
@@ -2181,7 +2197,7 @@
}
wc->wr_id = wq->wrid[wq->tail & (wq->wqe_cnt - 1)];
++wq->tail;
- } else {
+ } else {
/* RQ conrespond to CQE */
wc->byte_len = le32_to_cpu(cqe->byte_cnt);
opcode = roce_get_field(cqe->cqe_byte_4,
@@ -3533,10 +3549,12 @@
old_cnt = roce_get_field(old_send,
ROCEE_SDB_SEND_PTR_SDB_SEND_PTR_M,
ROCEE_SDB_SEND_PTR_SDB_SEND_PTR_S);
- if (cur_cnt - old_cnt > SDB_ST_CMP_VAL)
+ if (cur_cnt - old_cnt >
+ SDB_ST_CMP_VAL) {
success_flags = 1;
- else {
- send_ptr = roce_get_field(old_send,
+ } else {
+ send_ptr =
+ roce_get_field(old_send,
ROCEE_SDB_SEND_PTR_SDB_SEND_PTR_M,
ROCEE_SDB_SEND_PTR_SDB_SEND_PTR_S) +
roce_get_field(sdb_retry_cnt,
@@ -3641,6 +3659,7 @@
struct hns_roce_dev *hr_dev;
struct hns_roce_qp *hr_qp;
struct device *dev;
+ unsigned long qpn;
int ret;
qp_work_entry = container_of(work, struct hns_roce_qp_work, work);
@@ -3648,8 +3667,9 @@
dev = &hr_dev->pdev->dev;
priv = (struct hns_roce_v1_priv *)hr_dev->hw->priv;
hr_qp = qp_work_entry->qp;
+ qpn = hr_qp->qpn;
- dev_dbg(dev, "Schedule destroy QP(0x%lx) work.\n", hr_qp->qpn);
+ dev_dbg(dev, "Schedule destroy QP(0x%lx) work.\n", qpn);
qp_work_entry->sche_cnt++;
@@ -3660,7 +3680,7 @@
&qp_work_entry->db_wait_stage);
if (ret) {
dev_err(dev, "Check QP(0x%lx) db process status failed!\n",
- hr_qp->qpn);
+ qpn);
return;
}
@@ -3674,7 +3694,7 @@
ret = hns_roce_v1_modify_qp(&hr_qp->ibqp, NULL, 0, hr_qp->state,
IB_QPS_RESET);
if (ret) {
- dev_err(dev, "Modify QP(0x%lx) to RST failed!\n", hr_qp->qpn);
+ dev_err(dev, "Modify QP(0x%lx) to RST failed!\n", qpn);
return;
}
@@ -3683,14 +3703,14 @@
if (hr_qp->ibqp.qp_type == IB_QPT_RC) {
/* RC QP, release QPN */
- hns_roce_release_range_qp(hr_dev, hr_qp->qpn, 1);
+ hns_roce_release_range_qp(hr_dev, qpn, 1);
kfree(hr_qp);
} else
kfree(hr_to_hr_sqp(hr_qp));
kfree(qp_work_entry);
- dev_dbg(dev, "Accomplished destroy QP(0x%lx) work.\n", hr_qp->qpn);
+ dev_dbg(dev, "Accomplished destroy QP(0x%lx) work.\n", qpn);
}
int hns_roce_v1_destroy_qp(struct ib_qp *ibqp)
diff --git a/drivers/infiniband/hw/hns/hns_roce_main.c b/drivers/infiniband/hw/hns/hns_roce_main.c
index c3b41f9..d9777b6 100644
--- a/drivers/infiniband/hw/hns/hns_roce_main.c
+++ b/drivers/infiniband/hw/hns/hns_roce_main.c
@@ -125,8 +125,6 @@
return -ENODEV;
}
- spin_lock_bh(&hr_dev->iboe.lock);
-
switch (event) {
case NETDEV_UP:
case NETDEV_CHANGE:
@@ -144,7 +142,6 @@
break;
}
- spin_unlock_bh(&hr_dev->iboe.lock);
return 0;
}
diff --git a/drivers/infiniband/hw/i40iw/i40iw.h b/drivers/infiniband/hw/i40iw/i40iw.h
index da2eb5a..9b15664 100644
--- a/drivers/infiniband/hw/i40iw/i40iw.h
+++ b/drivers/infiniband/hw/i40iw/i40iw.h
@@ -527,6 +527,7 @@
int i40iw_modify_qp(struct ib_qp *, struct ib_qp_attr *, int, struct ib_udata *);
void i40iw_cq_wq_destroy(struct i40iw_device *iwdev, struct i40iw_sc_cq *cq);
+void i40iw_cleanup_pending_cqp_op(struct i40iw_device *iwdev);
void i40iw_rem_pdusecount(struct i40iw_pd *iwpd, struct i40iw_device *iwdev);
void i40iw_add_pdusecount(struct i40iw_pd *iwpd);
void i40iw_rem_devusecount(struct i40iw_device *iwdev);
diff --git a/drivers/infiniband/hw/i40iw/i40iw_cm.c b/drivers/infiniband/hw/i40iw/i40iw_cm.c
index 6ae98aa..5a2fa74 100644
--- a/drivers/infiniband/hw/i40iw/i40iw_cm.c
+++ b/drivers/infiniband/hw/i40iw/i40iw_cm.c
@@ -3487,7 +3487,8 @@
if (((original_hw_tcp_state == I40IW_TCP_STATE_CLOSED) ||
(original_hw_tcp_state == I40IW_TCP_STATE_TIME_WAIT) ||
(last_ae == I40IW_AE_RDMAP_ROE_BAD_LLP_CLOSE) ||
- (last_ae == I40IW_AE_LLP_CONNECTION_RESET))) {
+ (last_ae == I40IW_AE_LLP_CONNECTION_RESET) ||
+ iwdev->reset)) {
issue_close = 1;
iwqp->cm_id = NULL;
if (!iwqp->flush_issued) {
@@ -4265,6 +4266,8 @@
cm_node = container_of(list_node, struct i40iw_cm_node, connected_entry);
attr.qp_state = IB_QPS_ERR;
i40iw_modify_qp(&cm_node->iwqp->ibqp, &attr, IB_QP_STATE, NULL);
+ if (iwdev->reset)
+ i40iw_cm_disconn(cm_node->iwqp);
i40iw_rem_ref_cm_node(cm_node);
}
}
diff --git a/drivers/infiniband/hw/i40iw/i40iw_ctrl.c b/drivers/infiniband/hw/i40iw/i40iw_ctrl.c
index a027e20..9ec1ae9 100644
--- a/drivers/infiniband/hw/i40iw/i40iw_ctrl.c
+++ b/drivers/infiniband/hw/i40iw/i40iw_ctrl.c
@@ -1970,6 +1970,8 @@
ret_code = i40iw_cqp_poll_registers(cqp, tail, 1000);
}
+ cqp->process_cqp_sds = i40iw_update_sds_noccq;
+
return ret_code;
}
diff --git a/drivers/infiniband/hw/i40iw/i40iw_main.c b/drivers/infiniband/hw/i40iw/i40iw_main.c
index e0f47cc..ae8463f 100644
--- a/drivers/infiniband/hw/i40iw/i40iw_main.c
+++ b/drivers/infiniband/hw/i40iw/i40iw_main.c
@@ -243,6 +243,8 @@
if (free_hwcqp)
dev->cqp_ops->cqp_destroy(dev->cqp);
+ i40iw_cleanup_pending_cqp_op(iwdev);
+
i40iw_free_dma_mem(dev->hw, &cqp->sq);
kfree(cqp->scratch_array);
iwdev->cqp.scratch_array = NULL;
@@ -274,13 +276,12 @@
/**
* i40iw_destroy_aeq - destroy aeq
* @iwdev: iwarp device
- * @reset: true if called before reset
*
* Issue a destroy aeq request and
* free the resources associated with the aeq
* The function is called during driver unload
*/
-static void i40iw_destroy_aeq(struct i40iw_device *iwdev, bool reset)
+static void i40iw_destroy_aeq(struct i40iw_device *iwdev)
{
enum i40iw_status_code status = I40IW_ERR_NOT_READY;
struct i40iw_sc_dev *dev = &iwdev->sc_dev;
@@ -288,7 +289,7 @@
if (!iwdev->msix_shared)
i40iw_disable_irq(dev, iwdev->iw_msixtbl, (void *)iwdev);
- if (reset)
+ if (iwdev->reset)
goto exit;
if (!dev->aeq_ops->aeq_destroy(&aeq->sc_aeq, 0, 1))
@@ -304,19 +305,17 @@
* i40iw_destroy_ceq - destroy ceq
* @iwdev: iwarp device
* @iwceq: ceq to be destroyed
- * @reset: true if called before reset
*
* Issue a destroy ceq request and
* free the resources associated with the ceq
*/
static void i40iw_destroy_ceq(struct i40iw_device *iwdev,
- struct i40iw_ceq *iwceq,
- bool reset)
+ struct i40iw_ceq *iwceq)
{
enum i40iw_status_code status;
struct i40iw_sc_dev *dev = &iwdev->sc_dev;
- if (reset)
+ if (iwdev->reset)
goto exit;
status = dev->ceq_ops->ceq_destroy(&iwceq->sc_ceq, 0, 1);
@@ -335,12 +334,11 @@
/**
* i40iw_dele_ceqs - destroy all ceq's
* @iwdev: iwarp device
- * @reset: true if called before reset
*
* Go through all of the device ceq's and for each ceq
* disable the ceq interrupt and destroy the ceq
*/
-static void i40iw_dele_ceqs(struct i40iw_device *iwdev, bool reset)
+static void i40iw_dele_ceqs(struct i40iw_device *iwdev)
{
u32 i = 0;
struct i40iw_sc_dev *dev = &iwdev->sc_dev;
@@ -349,32 +347,31 @@
if (iwdev->msix_shared) {
i40iw_disable_irq(dev, msix_vec, (void *)iwdev);
- i40iw_destroy_ceq(iwdev, iwceq, reset);
+ i40iw_destroy_ceq(iwdev, iwceq);
iwceq++;
i++;
}
for (msix_vec++; i < iwdev->ceqs_count; i++, msix_vec++, iwceq++) {
i40iw_disable_irq(dev, msix_vec, (void *)iwceq);
- i40iw_destroy_ceq(iwdev, iwceq, reset);
+ i40iw_destroy_ceq(iwdev, iwceq);
}
}
/**
* i40iw_destroy_ccq - destroy control cq
* @iwdev: iwarp device
- * @reset: true if called before reset
*
* Issue destroy ccq request and
* free the resources associated with the ccq
*/
-static void i40iw_destroy_ccq(struct i40iw_device *iwdev, bool reset)
+static void i40iw_destroy_ccq(struct i40iw_device *iwdev)
{
struct i40iw_sc_dev *dev = &iwdev->sc_dev;
struct i40iw_ccq *ccq = &iwdev->ccq;
enum i40iw_status_code status = 0;
- if (!reset)
+ if (!iwdev->reset)
status = dev->ccq_ops->ccq_destroy(dev->ccq, 0, true);
if (status)
i40iw_pr_err("ccq destroy failed %d\n", status);
@@ -810,7 +807,7 @@
iwceq->msix_idx = msix_vec->idx;
status = i40iw_configure_ceq_vector(iwdev, iwceq, ceq_id, msix_vec);
if (status) {
- i40iw_destroy_ceq(iwdev, iwceq, false);
+ i40iw_destroy_ceq(iwdev, iwceq);
break;
}
i40iw_enable_intr(&iwdev->sc_dev, msix_vec->idx);
@@ -912,7 +909,7 @@
status = i40iw_configure_aeq_vector(iwdev);
if (status) {
- i40iw_destroy_aeq(iwdev, false);
+ i40iw_destroy_aeq(iwdev);
return status;
}
@@ -1442,12 +1439,11 @@
/**
* i40iw_deinit_device - clean up the device resources
* @iwdev: iwarp device
- * @reset: true if called before reset
*
* Destroy the ib device interface, remove the mac ip entry and ipv4/ipv6 addresses,
* destroy the device queues and free the pble and the hmc objects
*/
-static void i40iw_deinit_device(struct i40iw_device *iwdev, bool reset)
+static void i40iw_deinit_device(struct i40iw_device *iwdev)
{
struct i40e_info *ldev = iwdev->ldev;
@@ -1464,7 +1460,7 @@
i40iw_destroy_rdma_device(iwdev->iwibdev);
/* fallthrough */
case IP_ADDR_REGISTERED:
- if (!reset)
+ if (!iwdev->reset)
i40iw_del_macip_entry(iwdev, (u8)iwdev->mac_ip_table_idx);
/* fallthrough */
case INET_NOTIFIER:
@@ -1474,26 +1470,26 @@
unregister_inet6addr_notifier(&i40iw_inetaddr6_notifier);
}
/* fallthrough */
- case CEQ_CREATED:
- i40iw_dele_ceqs(iwdev, reset);
- /* fallthrough */
- case AEQ_CREATED:
- i40iw_destroy_aeq(iwdev, reset);
- /* fallthrough */
- case IEQ_CREATED:
- i40iw_puda_dele_resources(&iwdev->vsi, I40IW_PUDA_RSRC_TYPE_IEQ, reset);
- /* fallthrough */
- case ILQ_CREATED:
- i40iw_puda_dele_resources(&iwdev->vsi, I40IW_PUDA_RSRC_TYPE_ILQ, reset);
- /* fallthrough */
- case CCQ_CREATED:
- i40iw_destroy_ccq(iwdev, reset);
- /* fallthrough */
case PBLE_CHUNK_MEM:
i40iw_destroy_pble_pool(dev, iwdev->pble_rsrc);
/* fallthrough */
+ case CEQ_CREATED:
+ i40iw_dele_ceqs(iwdev);
+ /* fallthrough */
+ case AEQ_CREATED:
+ i40iw_destroy_aeq(iwdev);
+ /* fallthrough */
+ case IEQ_CREATED:
+ i40iw_puda_dele_resources(&iwdev->vsi, I40IW_PUDA_RSRC_TYPE_IEQ, iwdev->reset);
+ /* fallthrough */
+ case ILQ_CREATED:
+ i40iw_puda_dele_resources(&iwdev->vsi, I40IW_PUDA_RSRC_TYPE_ILQ, iwdev->reset);
+ /* fallthrough */
+ case CCQ_CREATED:
+ i40iw_destroy_ccq(iwdev);
+ /* fallthrough */
case HMC_OBJS_CREATED:
- i40iw_del_hmc_objects(dev, dev->hmc_info, true, reset);
+ i40iw_del_hmc_objects(dev, dev->hmc_info, true, iwdev->reset);
/* fallthrough */
case CQP_CREATED:
i40iw_destroy_cqp(iwdev, true);
@@ -1670,6 +1666,7 @@
status = i40iw_hmc_init_pble(&iwdev->sc_dev, iwdev->pble_rsrc);
if (status)
break;
+ iwdev->init_state = PBLE_CHUNK_MEM;
iwdev->virtchnl_wq = alloc_ordered_workqueue("iwvch", WQ_MEM_RECLAIM);
i40iw_register_notifiers();
iwdev->init_state = INET_NOTIFIER;
@@ -1693,7 +1690,7 @@
} while (0);
i40iw_pr_err("status = %d last completion = %d\n", status, iwdev->init_state);
- i40iw_deinit_device(iwdev, false);
+ i40iw_deinit_device(iwdev);
return -ERESTART;
}
@@ -1774,9 +1771,12 @@
iwdev = &hdl->device;
iwdev->closing = true;
+ if (reset)
+ iwdev->reset = true;
+
i40iw_cm_disconnect_all(iwdev);
destroy_workqueue(iwdev->virtchnl_wq);
- i40iw_deinit_device(iwdev, reset);
+ i40iw_deinit_device(iwdev);
}
/**
diff --git a/drivers/infiniband/hw/i40iw/i40iw_puda.c b/drivers/infiniband/hw/i40iw/i40iw_puda.c
index db41ab4..71050c5 100644
--- a/drivers/infiniband/hw/i40iw/i40iw_puda.c
+++ b/drivers/infiniband/hw/i40iw/i40iw_puda.c
@@ -408,6 +408,9 @@
set_64bit_val(wqe, 0, info->paddr);
set_64bit_val(wqe, 8, LS_64(info->len, I40IWQPSQ_FRAG_LEN));
set_64bit_val(wqe, 16, header[0]);
+
+ /* Ensure all data is written before writing valid bit */
+ wmb();
set_64bit_val(wqe, 24, header[1]);
i40iw_debug_buf(qp->dev, I40IW_DEBUG_PUDA, "PUDA SEND WQE", wqe, 32);
@@ -1411,10 +1414,10 @@
if (!list_empty(rxlist)) {
tmpbuf = (struct i40iw_puda_buf *)rxlist->next;
- plist = &tmpbuf->list;
while ((struct list_head *)tmpbuf != rxlist) {
if ((int)(buf->seqnum - tmpbuf->seqnum) < 0)
break;
+ plist = &tmpbuf->list;
tmpbuf = (struct i40iw_puda_buf *)plist->next;
}
/* Insert buf before tmpbuf */
diff --git a/drivers/infiniband/hw/i40iw/i40iw_utils.c b/drivers/infiniband/hw/i40iw/i40iw_utils.c
index 56d9869..e311ec5 100644
--- a/drivers/infiniband/hw/i40iw/i40iw_utils.c
+++ b/drivers/infiniband/hw/i40iw/i40iw_utils.c
@@ -337,6 +337,7 @@
*/
void i40iw_free_cqp_request(struct i40iw_cqp *cqp, struct i40iw_cqp_request *cqp_request)
{
+ struct i40iw_device *iwdev = container_of(cqp, struct i40iw_device, cqp);
unsigned long flags;
if (cqp_request->dynamic) {
@@ -350,6 +351,7 @@
list_add_tail(&cqp_request->list, &cqp->cqp_avail_reqs);
spin_unlock_irqrestore(&cqp->req_lock, flags);
}
+ wake_up(&iwdev->close_wq);
}
/**
@@ -365,6 +367,56 @@
}
/**
+ * i40iw_free_pending_cqp_request -free pending cqp request objs
+ * @cqp: cqp ptr
+ * @cqp_request: to be put back in cqp list
+ */
+static void i40iw_free_pending_cqp_request(struct i40iw_cqp *cqp,
+ struct i40iw_cqp_request *cqp_request)
+{
+ struct i40iw_device *iwdev = container_of(cqp, struct i40iw_device, cqp);
+
+ if (cqp_request->waiting) {
+ cqp_request->compl_info.error = true;
+ cqp_request->request_done = true;
+ wake_up(&cqp_request->waitq);
+ }
+ i40iw_put_cqp_request(cqp, cqp_request);
+ wait_event_timeout(iwdev->close_wq,
+ !atomic_read(&cqp_request->refcount),
+ 1000);
+}
+
+/**
+ * i40iw_cleanup_pending_cqp_op - clean-up cqp with no completions
+ * @iwdev: iwarp device
+ */
+void i40iw_cleanup_pending_cqp_op(struct i40iw_device *iwdev)
+{
+ struct i40iw_sc_dev *dev = &iwdev->sc_dev;
+ struct i40iw_cqp *cqp = &iwdev->cqp;
+ struct i40iw_cqp_request *cqp_request = NULL;
+ struct cqp_commands_info *pcmdinfo = NULL;
+ u32 i, pending_work, wqe_idx;
+
+ pending_work = I40IW_RING_WORK_AVAILABLE(cqp->sc_cqp.sq_ring);
+ wqe_idx = I40IW_RING_GETCURRENT_TAIL(cqp->sc_cqp.sq_ring);
+ for (i = 0; i < pending_work; i++) {
+ cqp_request = (struct i40iw_cqp_request *)(unsigned long)cqp->scratch_array[wqe_idx];
+ if (cqp_request)
+ i40iw_free_pending_cqp_request(cqp, cqp_request);
+ wqe_idx = (wqe_idx + 1) % I40IW_RING_GETSIZE(cqp->sc_cqp.sq_ring);
+ }
+
+ while (!list_empty(&dev->cqp_cmd_head)) {
+ pcmdinfo = (struct cqp_commands_info *)i40iw_remove_head(&dev->cqp_cmd_head);
+ cqp_request = container_of(pcmdinfo, struct i40iw_cqp_request, info);
+ if (cqp_request)
+ i40iw_free_pending_cqp_request(cqp, cqp_request);
+ }
+}
+
+/**
* i40iw_free_qp - callback after destroy cqp completes
* @cqp_request: cqp request for destroy qp
* @num: not used
@@ -546,8 +598,12 @@
cqp_info->in.u.qp_destroy.scratch = (uintptr_t)cqp_request;
cqp_info->in.u.qp_destroy.remove_hash_idx = true;
status = i40iw_handle_cqp_op(iwdev, cqp_request);
- if (status)
- i40iw_pr_err("CQP-OP Destroy QP fail");
+ if (!status)
+ return;
+
+ i40iw_rem_pdusecount(iwqp->iwpd, iwdev);
+ i40iw_free_qp_resources(iwdev, iwqp, qp_num);
+ i40iw_rem_devusecount(iwdev);
}
/**
diff --git a/drivers/infiniband/hw/i40iw/i40iw_verbs.c b/drivers/infiniband/hw/i40iw/i40iw_verbs.c
index 4dbe61e..02d871d 100644
--- a/drivers/infiniband/hw/i40iw/i40iw_verbs.c
+++ b/drivers/infiniband/hw/i40iw/i40iw_verbs.c
@@ -426,9 +426,13 @@
struct i40iw_qp *iwqp,
u32 qp_num)
{
+ struct i40iw_pbl *iwpbl = &iwqp->iwpbl;
+
i40iw_dealloc_push_page(iwdev, &iwqp->sc_qp);
if (qp_num)
i40iw_free_resource(iwdev, iwdev->allocated_qps, qp_num);
+ if (iwpbl->pbl_allocated)
+ i40iw_free_pble(iwdev->pble_rsrc, &iwpbl->pble_alloc);
i40iw_free_dma_mem(iwdev->sc_dev.hw, &iwqp->q2_ctx_mem);
i40iw_free_dma_mem(iwdev->sc_dev.hw, &iwqp->kqp.dma_mem);
kfree(iwqp->kqp.wrid_mem);
@@ -483,7 +487,7 @@
struct i40iw_qp *iwqp,
struct i40iw_qp_init_info *init_info)
{
- struct i40iw_pbl *iwpbl = iwqp->iwpbl;
+ struct i40iw_pbl *iwpbl = &iwqp->iwpbl;
struct i40iw_qp_mr *qpmr = &iwpbl->qp_mr;
iwqp->page = qpmr->sq_page;
@@ -688,19 +692,22 @@
ucontext = to_ucontext(ibpd->uobject->context);
if (req.user_wqe_buffers) {
+ struct i40iw_pbl *iwpbl;
+
spin_lock_irqsave(
&ucontext->qp_reg_mem_list_lock, flags);
- iwqp->iwpbl = i40iw_get_pbl(
+ iwpbl = i40iw_get_pbl(
(unsigned long)req.user_wqe_buffers,
&ucontext->qp_reg_mem_list);
spin_unlock_irqrestore(
&ucontext->qp_reg_mem_list_lock, flags);
- if (!iwqp->iwpbl) {
+ if (!iwpbl) {
err_code = -ENODATA;
i40iw_pr_err("no pbl info\n");
goto error;
}
+ memcpy(&iwqp->iwpbl, iwpbl, sizeof(iwqp->iwpbl));
}
}
err_code = i40iw_setup_virt_qp(iwdev, iwqp, &init_info);
@@ -1161,8 +1168,10 @@
memset(&req, 0, sizeof(req));
iwcq->user_mode = true;
ucontext = to_ucontext(context);
- if (ib_copy_from_udata(&req, udata, sizeof(struct i40iw_create_cq_req)))
+ if (ib_copy_from_udata(&req, udata, sizeof(struct i40iw_create_cq_req))) {
+ err_code = -EFAULT;
goto cq_free_resources;
+ }
spin_lock_irqsave(&ucontext->cq_reg_mem_list_lock, flags);
iwpbl = i40iw_get_pbl((unsigned long)req.user_cq_buffer,
@@ -2063,7 +2072,7 @@
ucontext = to_ucontext(ibpd->uobject->context);
i40iw_del_memlist(iwmr, ucontext);
}
- if (iwpbl->pbl_allocated)
+ if (iwpbl->pbl_allocated && iwmr->type != IW_MEMREG_TYPE_QP)
i40iw_free_pble(iwdev->pble_rsrc, palloc);
kfree(iwmr);
return 0;
diff --git a/drivers/infiniband/hw/i40iw/i40iw_verbs.h b/drivers/infiniband/hw/i40iw/i40iw_verbs.h
index 07c3fec..9067443 100644
--- a/drivers/infiniband/hw/i40iw/i40iw_verbs.h
+++ b/drivers/infiniband/hw/i40iw/i40iw_verbs.h
@@ -170,7 +170,7 @@
struct i40iw_qp_kmode kqp;
struct i40iw_dma_mem host_ctx;
struct timer_list terminate_timer;
- struct i40iw_pbl *iwpbl;
+ struct i40iw_pbl iwpbl;
struct i40iw_dma_mem q2_ctx_mem;
struct i40iw_dma_mem ietf_mem;
struct completion sq_drained;
diff --git a/drivers/infiniband/hw/mlx4/cm.c b/drivers/infiniband/hw/mlx4/cm.c
index 1e6c526..fedaf82 100644
--- a/drivers/infiniband/hw/mlx4/cm.c
+++ b/drivers/infiniband/hw/mlx4/cm.c
@@ -323,6 +323,9 @@
mad->mad_hdr.attr_id == CM_REP_ATTR_ID ||
mad->mad_hdr.attr_id == CM_SIDR_REQ_ATTR_ID) {
sl_cm_id = get_local_comm_id(mad);
+ id = id_map_get(ibdev, &pv_cm_id, slave_id, sl_cm_id);
+ if (id)
+ goto cont;
id = id_map_alloc(ibdev, slave_id, sl_cm_id);
if (IS_ERR(id)) {
mlx4_ib_warn(ibdev, "%s: id{slave: %d, sl_cm_id: 0x%x} Failed to id_map_alloc\n",
@@ -343,6 +346,7 @@
return -EINVAL;
}
+cont:
set_local_comm_id(mad, id->pv_cm_id);
if (mad->mad_hdr.attr_id == CM_DREQ_ATTR_ID)
diff --git a/drivers/infiniband/hw/mlx4/cq.c b/drivers/infiniband/hw/mlx4/cq.c
index 4f5a143..ff931c5 100644
--- a/drivers/infiniband/hw/mlx4/cq.c
+++ b/drivers/infiniband/hw/mlx4/cq.c
@@ -102,7 +102,7 @@
int err;
err = mlx4_buf_alloc(dev->dev, nent * dev->dev->caps.cqe_size,
- PAGE_SIZE * 2, &buf->buf, GFP_KERNEL);
+ PAGE_SIZE * 2, &buf->buf);
if (err)
goto out;
@@ -113,7 +113,7 @@
if (err)
goto err_buf;
- err = mlx4_buf_write_mtt(dev->dev, &buf->mtt, &buf->buf, GFP_KERNEL);
+ err = mlx4_buf_write_mtt(dev->dev, &buf->mtt, &buf->buf);
if (err)
goto err_mtt;
@@ -219,7 +219,7 @@
uar = &to_mucontext(context)->uar;
} else {
- err = mlx4_db_alloc(dev->dev, &cq->db, 1, GFP_KERNEL);
+ err = mlx4_db_alloc(dev->dev, &cq->db, 1);
if (err)
goto err_cq;
diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c
index 75b2f7d..d1b43cb 100644
--- a/drivers/infiniband/hw/mlx4/main.c
+++ b/drivers/infiniband/hw/mlx4/main.c
@@ -1155,7 +1155,7 @@
* call to mlx4_ib_vma_close.
*/
put_task_struct(owning_process);
- msleep(1);
+ usleep_range(1000, 2000);
owning_process = get_pid_task(ibcontext->tgid,
PIDTYPE_PID);
if (!owning_process ||
diff --git a/drivers/infiniband/hw/mlx4/mcg.c b/drivers/infiniband/hw/mlx4/mcg.c
index 3405e94..b73f897 100644
--- a/drivers/infiniband/hw/mlx4/mcg.c
+++ b/drivers/infiniband/hw/mlx4/mcg.c
@@ -1091,7 +1091,7 @@
if (!count)
break;
- msleep(1);
+ usleep_range(1000, 2000);
} while (time_after(end, jiffies));
flush_workqueue(ctx->mcg_wq);
diff --git a/drivers/infiniband/hw/mlx4/mlx4_ib.h b/drivers/infiniband/hw/mlx4/mlx4_ib.h
index c2b9cbf..9db82e6 100644
--- a/drivers/infiniband/hw/mlx4/mlx4_ib.h
+++ b/drivers/infiniband/hw/mlx4/mlx4_ib.h
@@ -185,7 +185,6 @@
MLX4_IB_QP_LSO = IB_QP_CREATE_IPOIB_UD_LSO,
MLX4_IB_QP_BLOCK_MULTICAST_LOOPBACK = IB_QP_CREATE_BLOCK_MULTICAST_LOOPBACK,
MLX4_IB_QP_NETIF = IB_QP_CREATE_NETIF_QP,
- MLX4_IB_QP_CREATE_USE_GFP_NOIO = IB_QP_CREATE_USE_GFP_NOIO,
/* Mellanox specific flags start from IB_QP_CREATE_RESERVED_START */
MLX4_IB_ROCE_V2_GSI_QP = MLX4_IB_QP_CREATE_ROCE_V2_GSI,
diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index 996e905..75c0e6c 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -634,8 +634,8 @@
static int create_qp_common(struct mlx4_ib_dev *dev, struct ib_pd *pd,
struct ib_qp_init_attr *init_attr,
- struct ib_udata *udata, int sqpn, struct mlx4_ib_qp **caller_qp,
- gfp_t gfp)
+ struct ib_udata *udata, int sqpn,
+ struct mlx4_ib_qp **caller_qp)
{
int qpn;
int err;
@@ -691,14 +691,14 @@
if (qp_type == MLX4_IB_QPT_SMI || qp_type == MLX4_IB_QPT_GSI ||
(qp_type & (MLX4_IB_QPT_PROXY_SMI | MLX4_IB_QPT_PROXY_SMI_OWNER |
MLX4_IB_QPT_PROXY_GSI | MLX4_IB_QPT_TUN_SMI_OWNER))) {
- sqp = kzalloc(sizeof (struct mlx4_ib_sqp), gfp);
+ sqp = kzalloc(sizeof(struct mlx4_ib_sqp), GFP_KERNEL);
if (!sqp)
return -ENOMEM;
qp = &sqp->qp;
qp->pri.vid = 0xFFFF;
qp->alt.vid = 0xFFFF;
} else {
- qp = kzalloc(sizeof (struct mlx4_ib_qp), gfp);
+ qp = kzalloc(sizeof(struct mlx4_ib_qp), GFP_KERNEL);
if (!qp)
return -ENOMEM;
qp->pri.vid = 0xFFFF;
@@ -780,7 +780,7 @@
goto err;
if (qp_has_rq(init_attr)) {
- err = mlx4_db_alloc(dev->dev, &qp->db, 0, gfp);
+ err = mlx4_db_alloc(dev->dev, &qp->db, 0);
if (err)
goto err;
@@ -788,7 +788,7 @@
}
if (mlx4_buf_alloc(dev->dev, qp->buf_size, qp->buf_size,
- &qp->buf, gfp)) {
+ &qp->buf)) {
memcpy(&init_attr->cap, &backup_cap,
sizeof(backup_cap));
err = set_kernel_sq_size(dev, &init_attr->cap, qp_type,
@@ -797,7 +797,7 @@
goto err_db;
if (mlx4_buf_alloc(dev->dev, qp->buf_size,
- PAGE_SIZE * 2, &qp->buf, gfp)) {
+ PAGE_SIZE * 2, &qp->buf)) {
err = -ENOMEM;
goto err_db;
}
@@ -808,20 +808,20 @@
if (err)
goto err_buf;
- err = mlx4_buf_write_mtt(dev->dev, &qp->mtt, &qp->buf, gfp);
+ err = mlx4_buf_write_mtt(dev->dev, &qp->mtt, &qp->buf);
if (err)
goto err_mtt;
qp->sq.wrid = kmalloc_array(qp->sq.wqe_cnt, sizeof(u64),
- gfp | __GFP_NOWARN);
+ GFP_KERNEL | __GFP_NOWARN);
if (!qp->sq.wrid)
qp->sq.wrid = __vmalloc(qp->sq.wqe_cnt * sizeof(u64),
- gfp, PAGE_KERNEL);
+ GFP_KERNEL, PAGE_KERNEL);
qp->rq.wrid = kmalloc_array(qp->rq.wqe_cnt, sizeof(u64),
- gfp | __GFP_NOWARN);
+ GFP_KERNEL | __GFP_NOWARN);
if (!qp->rq.wrid)
qp->rq.wrid = __vmalloc(qp->rq.wqe_cnt * sizeof(u64),
- gfp, PAGE_KERNEL);
+ GFP_KERNEL, PAGE_KERNEL);
if (!qp->sq.wrid || !qp->rq.wrid) {
err = -ENOMEM;
goto err_wrid;
@@ -859,7 +859,7 @@
if (init_attr->create_flags & IB_QP_CREATE_BLOCK_MULTICAST_LOOPBACK)
qp->flags |= MLX4_IB_QP_BLOCK_MULTICAST_LOOPBACK;
- err = mlx4_qp_alloc(dev->dev, qpn, &qp->mqp, gfp);
+ err = mlx4_qp_alloc(dev->dev, qpn, &qp->mqp);
if (err)
goto err_qpn;
@@ -1127,10 +1127,7 @@
int err;
int sup_u_create_flags = MLX4_IB_QP_BLOCK_MULTICAST_LOOPBACK;
u16 xrcdn = 0;
- gfp_t gfp;
- gfp = (init_attr->create_flags & MLX4_IB_QP_CREATE_USE_GFP_NOIO) ?
- GFP_NOIO : GFP_KERNEL;
/*
* We only support LSO, vendor flag1, and multicast loopback blocking,
* and only for kernel UD QPs.
@@ -1140,8 +1137,7 @@
MLX4_IB_SRIOV_TUNNEL_QP |
MLX4_IB_SRIOV_SQP |
MLX4_IB_QP_NETIF |
- MLX4_IB_QP_CREATE_ROCE_V2_GSI |
- MLX4_IB_QP_CREATE_USE_GFP_NOIO))
+ MLX4_IB_QP_CREATE_ROCE_V2_GSI))
return ERR_PTR(-EINVAL);
if (init_attr->create_flags & IB_QP_CREATE_NETIF_QP) {
@@ -1154,7 +1150,6 @@
return ERR_PTR(-EINVAL);
if ((init_attr->create_flags & ~(MLX4_IB_SRIOV_SQP |
- MLX4_IB_QP_CREATE_USE_GFP_NOIO |
MLX4_IB_QP_CREATE_ROCE_V2_GSI |
MLX4_IB_QP_BLOCK_MULTICAST_LOOPBACK) &&
init_attr->qp_type != IB_QPT_UD) ||
@@ -1179,7 +1174,7 @@
case IB_QPT_RC:
case IB_QPT_UC:
case IB_QPT_RAW_PACKET:
- qp = kzalloc(sizeof *qp, gfp);
+ qp = kzalloc(sizeof(*qp), GFP_KERNEL);
if (!qp)
return ERR_PTR(-ENOMEM);
qp->pri.vid = 0xFFFF;
@@ -1188,7 +1183,7 @@
case IB_QPT_UD:
{
err = create_qp_common(to_mdev(pd->device), pd, init_attr,
- udata, 0, &qp, gfp);
+ udata, 0, &qp);
if (err) {
kfree(qp);
return ERR_PTR(err);
@@ -1217,8 +1212,7 @@
}
err = create_qp_common(to_mdev(pd->device), pd, init_attr, udata,
- sqpn,
- &qp, gfp);
+ sqpn, &qp);
if (err)
return ERR_PTR(err);
diff --git a/drivers/infiniband/hw/mlx4/srq.c b/drivers/infiniband/hw/mlx4/srq.c
index e32dd58..0facaf5 100644
--- a/drivers/infiniband/hw/mlx4/srq.c
+++ b/drivers/infiniband/hw/mlx4/srq.c
@@ -135,14 +135,14 @@
if (err)
goto err_mtt;
} else {
- err = mlx4_db_alloc(dev->dev, &srq->db, 0, GFP_KERNEL);
+ err = mlx4_db_alloc(dev->dev, &srq->db, 0);
if (err)
goto err_srq;
*srq->db.db = 0;
- if (mlx4_buf_alloc(dev->dev, buf_size, PAGE_SIZE * 2, &srq->buf,
- GFP_KERNEL)) {
+ if (mlx4_buf_alloc(dev->dev, buf_size, PAGE_SIZE * 2,
+ &srq->buf)) {
err = -ENOMEM;
goto err_db;
}
@@ -167,7 +167,7 @@
if (err)
goto err_buf;
- err = mlx4_buf_write_mtt(dev->dev, &srq->mtt, &srq->buf, GFP_KERNEL);
+ err = mlx4_buf_write_mtt(dev->dev, &srq->mtt, &srq->buf);
if (err)
goto err_mtt;
diff --git a/drivers/infiniband/hw/mlx5/mr.c b/drivers/infiniband/hw/mlx5/mr.c
index 763bb5b..2c40a2e 100644
--- a/drivers/infiniband/hw/mlx5/mr.c
+++ b/drivers/infiniband/hw/mlx5/mr.c
@@ -582,6 +582,15 @@
}
}
+static void mlx5_mr_cache_debugfs_cleanup(struct mlx5_ib_dev *dev)
+{
+ if (!mlx5_debugfs_root)
+ return;
+
+ debugfs_remove_recursive(dev->cache.root);
+ dev->cache.root = NULL;
+}
+
static int mlx5_mr_cache_debugfs_init(struct mlx5_ib_dev *dev)
{
struct mlx5_mr_cache *cache = &dev->cache;
@@ -600,38 +609,34 @@
sprintf(ent->name, "%d", ent->order);
ent->dir = debugfs_create_dir(ent->name, cache->root);
if (!ent->dir)
- return -ENOMEM;
+ goto err;
ent->fsize = debugfs_create_file("size", 0600, ent->dir, ent,
&size_fops);
if (!ent->fsize)
- return -ENOMEM;
+ goto err;
ent->flimit = debugfs_create_file("limit", 0600, ent->dir, ent,
&limit_fops);
if (!ent->flimit)
- return -ENOMEM;
+ goto err;
ent->fcur = debugfs_create_u32("cur", 0400, ent->dir,
&ent->cur);
if (!ent->fcur)
- return -ENOMEM;
+ goto err;
ent->fmiss = debugfs_create_u32("miss", 0600, ent->dir,
&ent->miss);
if (!ent->fmiss)
- return -ENOMEM;
+ goto err;
}
return 0;
-}
+err:
+ mlx5_mr_cache_debugfs_cleanup(dev);
-static void mlx5_mr_cache_debugfs_cleanup(struct mlx5_ib_dev *dev)
-{
- if (!mlx5_debugfs_root)
- return;
-
- debugfs_remove_recursive(dev->cache.root);
+ return -ENOMEM;
}
static void delay_time_func(unsigned long ctx)
@@ -692,6 +697,11 @@
if (err)
mlx5_ib_warn(dev, "cache debugfs failure\n");
+ /*
+ * We don't want to fail driver if debugfs failed to initialize,
+ * so we are not forwarding error to the user.
+ */
+
return 0;
}
@@ -825,7 +835,7 @@
access_flags, 0);
err = PTR_ERR_OR_ZERO(*umem);
if (err < 0) {
- mlx5_ib_err(dev, "umem get failed (%ld)\n", PTR_ERR(umem));
+ mlx5_ib_err(dev, "umem get failed (%d)\n", err);
return err;
}
@@ -1779,7 +1789,7 @@
mr->ndescs = sg_nents;
for_each_sg(sgl, sg, sg_nents, i) {
- if (unlikely(i > mr->max_descs))
+ if (unlikely(i >= mr->max_descs))
break;
klms[i].va = cpu_to_be64(sg_dma_address(sg) + sg_offset);
klms[i].bcount = cpu_to_be32(sg_dma_len(sg) - sg_offset);
diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c
index 8f9d8b4..b0adf65 100644
--- a/drivers/infiniband/hw/nes/nes_hw.c
+++ b/drivers/infiniband/hw/nes/nes_hw.c
@@ -551,7 +551,7 @@
if ((0x0F000100 == (pcs_control_status0 & 0x0F000100))
|| (0x0F000100 == (pcs_control_status1 & 0x0F000100)))
int_cnt++;
- msleep(1);
+ usleep_range(1000, 2000);
}
if (int_cnt > 1) {
spin_lock_irqsave(&nesadapter->phy_lock, flags);
@@ -592,7 +592,7 @@
break;
}
}
- msleep(1);
+ usleep_range(1000, 2000);
}
}
}
diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c
index 2f30bda..27d5e8d 100644
--- a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c
+++ b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c
@@ -744,7 +744,8 @@
if (is_uctx_pd) {
ocrdma_release_ucontext_pd(uctx);
} else {
- status = _ocrdma_dealloc_pd(dev, pd);
+ if (_ocrdma_dealloc_pd(dev, pd))
+ pr_err("%s: _ocrdma_dealloc_pd() failed\n", __func__);
}
exit:
return ERR_PTR(status);
@@ -1901,6 +1902,7 @@
goto err;
if (udata == NULL) {
+ status = -ENOMEM;
srq->rqe_wr_id_tbl = kzalloc(sizeof(u64) * srq->rq.max_cnt,
GFP_KERNEL);
if (srq->rqe_wr_id_tbl == NULL)
diff --git a/drivers/infiniband/hw/qedr/verbs.c b/drivers/infiniband/hw/qedr/verbs.c
index 548e4d1..2ae71b8 100644
--- a/drivers/infiniband/hw/qedr/verbs.c
+++ b/drivers/infiniband/hw/qedr/verbs.c
@@ -53,6 +53,14 @@
#define DB_ADDR_SHIFT(addr) ((addr) << DB_PWM_ADDR_OFFSET_SHIFT)
+static inline int qedr_ib_copy_to_udata(struct ib_udata *udata, void *src,
+ size_t len)
+{
+ size_t min_len = min_t(size_t, len, udata->outlen);
+
+ return ib_copy_to_udata(udata, src, min_len);
+}
+
int qedr_query_pkey(struct ib_device *ibdev, u8 port, u16 index, u16 *pkey)
{
if (index > QEDR_ROCE_PKEY_TABLE_LEN)
@@ -378,7 +386,7 @@
uresp.sges_per_srq_wr = dev->attr.max_srq_sge;
uresp.max_cqes = QEDR_MAX_CQES;
- rc = ib_copy_to_udata(udata, &uresp, sizeof(uresp));
+ rc = qedr_ib_copy_to_udata(udata, &uresp, sizeof(uresp));
if (rc)
goto err;
@@ -499,7 +507,7 @@
uresp.pd_id = pd_id;
- rc = ib_copy_to_udata(udata, &uresp, sizeof(uresp));
+ rc = qedr_ib_copy_to_udata(udata, &uresp, sizeof(uresp));
if (rc) {
DP_ERR(dev, "copy error pd_id=0x%x.\n", pd_id);
dev->ops->rdma_dealloc_pd(dev->rdma_ctx, pd_id);
@@ -729,7 +737,7 @@
uresp.db_offset = DB_ADDR_SHIFT(DQ_PWM_OFFSET_UCM_RDMA_CQ_CONS_32BIT);
uresp.icid = cq->icid;
- rc = ib_copy_to_udata(udata, &uresp, sizeof(uresp));
+ rc = qedr_ib_copy_to_udata(udata, &uresp, sizeof(uresp));
if (rc)
DP_ERR(dev, "copy error cqid=0x%x.\n", cq->icid);
@@ -1238,7 +1246,7 @@
uresp.atomic_supported = dev->atomic_cap != IB_ATOMIC_NONE;
uresp.qp_id = qp->qp_id;
- rc = ib_copy_to_udata(udata, &uresp, sizeof(uresp));
+ rc = qedr_ib_copy_to_udata(udata, &uresp, sizeof(uresp));
if (rc)
DP_ERR(dev,
"create qp: failed a copy to user space with qp icid=0x%x.\n",
diff --git a/drivers/infiniband/hw/qib/qib_qp.c b/drivers/infiniband/hw/qib/qib_qp.c
index 5984981..a343e3b 100644
--- a/drivers/infiniband/hw/qib/qib_qp.c
+++ b/drivers/infiniband/hw/qib/qib_qp.c
@@ -104,10 +104,9 @@
};
-static void get_map_page(struct rvt_qpn_table *qpt, struct rvt_qpn_map *map,
- gfp_t gfp)
+static void get_map_page(struct rvt_qpn_table *qpt, struct rvt_qpn_map *map)
{
- unsigned long page = get_zeroed_page(gfp);
+ unsigned long page = get_zeroed_page(GFP_KERNEL);
/*
* Free the page if someone raced with us installing it.
@@ -126,7 +125,7 @@
* zero/one for QP type IB_QPT_SMI/IB_QPT_GSI.
*/
int qib_alloc_qpn(struct rvt_dev_info *rdi, struct rvt_qpn_table *qpt,
- enum ib_qp_type type, u8 port, gfp_t gfp)
+ enum ib_qp_type type, u8 port)
{
u32 i, offset, max_scan, qpn;
struct rvt_qpn_map *map;
@@ -160,7 +159,7 @@
max_scan = qpt->nmaps - !offset;
for (i = 0;;) {
if (unlikely(!map->page)) {
- get_map_page(qpt, map, gfp);
+ get_map_page(qpt, map);
if (unlikely(!map->page))
break;
}
@@ -317,16 +316,16 @@
return ib_mtu_enum_to_int(pmtu);
}
-void *qib_qp_priv_alloc(struct rvt_dev_info *rdi, struct rvt_qp *qp, gfp_t gfp)
+void *qib_qp_priv_alloc(struct rvt_dev_info *rdi, struct rvt_qp *qp)
{
struct qib_qp_priv *priv;
- priv = kzalloc(sizeof(*priv), gfp);
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv)
return ERR_PTR(-ENOMEM);
priv->owner = qp;
- priv->s_hdr = kzalloc(sizeof(*priv->s_hdr), gfp);
+ priv->s_hdr = kzalloc(sizeof(*priv->s_hdr), GFP_KERNEL);
if (!priv->s_hdr) {
kfree(priv);
return ERR_PTR(-ENOMEM);
diff --git a/drivers/infiniband/hw/qib/qib_verbs.h b/drivers/infiniband/hw/qib/qib_verbs.h
index da0db54..a52fc67 100644
--- a/drivers/infiniband/hw/qib/qib_verbs.h
+++ b/drivers/infiniband/hw/qib/qib_verbs.h
@@ -274,11 +274,11 @@
* Functions provided by qib driver for rdmavt to use
*/
unsigned qib_free_all_qps(struct rvt_dev_info *rdi);
-void *qib_qp_priv_alloc(struct rvt_dev_info *rdi, struct rvt_qp *qp, gfp_t gfp);
+void *qib_qp_priv_alloc(struct rvt_dev_info *rdi, struct rvt_qp *qp);
void qib_qp_priv_free(struct rvt_dev_info *rdi, struct rvt_qp *qp);
void qib_notify_qp_reset(struct rvt_qp *qp);
int qib_alloc_qpn(struct rvt_dev_info *rdi, struct rvt_qpn_table *qpt,
- enum ib_qp_type type, u8 port, gfp_t gfp);
+ enum ib_qp_type type, u8 port);
void qib_restart_rc(struct rvt_qp *qp, u32 psn, int wait);
#ifdef CONFIG_DEBUG_FS
diff --git a/drivers/infiniband/sw/rdmavt/qp.c b/drivers/infiniband/sw/rdmavt/qp.c
index 727e81c..8876ee7 100644
--- a/drivers/infiniband/sw/rdmavt/qp.c
+++ b/drivers/infiniband/sw/rdmavt/qp.c
@@ -118,10 +118,9 @@
EXPORT_SYMBOL(ib_rvt_state_ops);
static void get_map_page(struct rvt_qpn_table *qpt,
- struct rvt_qpn_map *map,
- gfp_t gfp)
+ struct rvt_qpn_map *map)
{
- unsigned long page = get_zeroed_page(gfp);
+ unsigned long page = get_zeroed_page(GFP_KERNEL);
/*
* Free the page if someone raced with us installing it.
@@ -173,7 +172,7 @@
rdi->dparms.qpn_res_start, rdi->dparms.qpn_res_end);
for (i = rdi->dparms.qpn_res_start; i <= rdi->dparms.qpn_res_end; i++) {
if (!map->page) {
- get_map_page(qpt, map, GFP_KERNEL);
+ get_map_page(qpt, map);
if (!map->page) {
ret = -ENOMEM;
break;
@@ -342,14 +341,14 @@
* Return: The queue pair number
*/
static int alloc_qpn(struct rvt_dev_info *rdi, struct rvt_qpn_table *qpt,
- enum ib_qp_type type, u8 port_num, gfp_t gfp)
+ enum ib_qp_type type, u8 port_num)
{
u32 i, offset, max_scan, qpn;
struct rvt_qpn_map *map;
u32 ret;
if (rdi->driver_f.alloc_qpn)
- return rdi->driver_f.alloc_qpn(rdi, qpt, type, port_num, gfp);
+ return rdi->driver_f.alloc_qpn(rdi, qpt, type, port_num);
if (type == IB_QPT_SMI || type == IB_QPT_GSI) {
unsigned n;
@@ -374,7 +373,7 @@
max_scan = qpt->nmaps - !offset;
for (i = 0;;) {
if (unlikely(!map->page)) {
- get_map_page(qpt, map, gfp);
+ get_map_page(qpt, map);
if (unlikely(!map->page))
break;
}
@@ -672,7 +671,6 @@
struct ib_qp *ret = ERR_PTR(-ENOMEM);
struct rvt_dev_info *rdi = ib_to_rvt(ibpd->device);
void *priv = NULL;
- gfp_t gfp;
size_t sqsize;
if (!rdi)
@@ -680,18 +678,9 @@
if (init_attr->cap.max_send_sge > rdi->dparms.props.max_sge ||
init_attr->cap.max_send_wr > rdi->dparms.props.max_qp_wr ||
- init_attr->create_flags & ~(IB_QP_CREATE_USE_GFP_NOIO))
+ init_attr->create_flags)
return ERR_PTR(-EINVAL);
- /* GFP_NOIO is applicable to RC QP's only */
-
- if (init_attr->create_flags & IB_QP_CREATE_USE_GFP_NOIO &&
- init_attr->qp_type != IB_QPT_RC)
- return ERR_PTR(-EINVAL);
-
- gfp = init_attr->create_flags & IB_QP_CREATE_USE_GFP_NOIO ?
- GFP_NOIO : GFP_KERNEL;
-
/* Check receive queue parameters if no SRQ is specified. */
if (!init_attr->srq) {
if (init_attr->cap.max_recv_sge > rdi->dparms.props.max_sge ||
@@ -719,14 +708,7 @@
sz = sizeof(struct rvt_sge) *
init_attr->cap.max_send_sge +
sizeof(struct rvt_swqe);
- if (gfp == GFP_NOIO)
- swq = __vmalloc(
- sqsize * sz,
- gfp | __GFP_ZERO, PAGE_KERNEL);
- else
- swq = vzalloc_node(
- sqsize * sz,
- rdi->dparms.node);
+ swq = vzalloc_node(sqsize * sz, rdi->dparms.node);
if (!swq)
return ERR_PTR(-ENOMEM);
@@ -741,7 +723,8 @@
} else if (init_attr->cap.max_recv_sge > 1)
sg_list_sz = sizeof(*qp->r_sg_list) *
(init_attr->cap.max_recv_sge - 1);
- qp = kzalloc_node(sz + sg_list_sz, gfp, rdi->dparms.node);
+ qp = kzalloc_node(sz + sg_list_sz, GFP_KERNEL,
+ rdi->dparms.node);
if (!qp)
goto bail_swq;
@@ -751,7 +734,7 @@
kzalloc_node(
sizeof(*qp->s_ack_queue) *
rvt_max_atomic(rdi),
- gfp,
+ GFP_KERNEL,
rdi->dparms.node);
if (!qp->s_ack_queue)
goto bail_qp;
@@ -766,7 +749,7 @@
* Driver needs to set up it's private QP structure and do any
* initialization that is needed.
*/
- priv = rdi->driver_f.qp_priv_alloc(rdi, qp, gfp);
+ priv = rdi->driver_f.qp_priv_alloc(rdi, qp);
if (IS_ERR(priv)) {
ret = priv;
goto bail_qp;
@@ -786,11 +769,6 @@
qp->r_rq.wq = vmalloc_user(
sizeof(struct rvt_rwq) +
qp->r_rq.size * sz);
- else if (gfp == GFP_NOIO)
- qp->r_rq.wq = __vmalloc(
- sizeof(struct rvt_rwq) +
- qp->r_rq.size * sz,
- gfp | __GFP_ZERO, PAGE_KERNEL);
else
qp->r_rq.wq = vzalloc_node(
sizeof(struct rvt_rwq) +
@@ -824,7 +802,7 @@
err = alloc_qpn(rdi, &rdi->qp_dev->qpn_table,
init_attr->qp_type,
- init_attr->port_num, gfp);
+ init_attr->port_num);
if (err < 0) {
ret = ERR_PTR(err);
goto bail_rq_wq;
@@ -1280,9 +1258,7 @@
if (attr_mask & IB_QP_TIMEOUT) {
qp->timeout = attr->timeout;
- qp->timeout_jiffies =
- usecs_to_jiffies((4096UL * (1UL << qp->timeout)) /
- 1000UL);
+ qp->timeout_jiffies = rvt_timeout_to_jiffies(qp->timeout);
}
if (attr_mask & IB_QP_QKEY)
diff --git a/drivers/infiniband/sw/rxe/rxe_net.c b/drivers/infiniband/sw/rxe/rxe_net.c
index c3a140e..08f3f90 100644
--- a/drivers/infiniband/sw/rxe/rxe_net.c
+++ b/drivers/infiniband/sw/rxe/rxe_net.c
@@ -441,6 +441,8 @@
if (unlikely(qp->need_req_skb &&
skb_out < RXE_INFLIGHT_SKBS_PER_QP_LOW))
rxe_run_task(&qp->req.task, 1);
+
+ rxe_drop_ref(qp);
}
int rxe_send(struct rxe_dev *rxe, struct rxe_pkt_info *pkt, struct sk_buff *skb)
@@ -473,6 +475,7 @@
return -EAGAIN;
}
+ rxe_add_ref(pkt->qp);
atomic_inc(&pkt->qp->skb_out);
kfree_skb(skb);
diff --git a/drivers/infiniband/sw/rxe/rxe_resp.c b/drivers/infiniband/sw/rxe/rxe_resp.c
index 2303976..a958ee9 100644
--- a/drivers/infiniband/sw/rxe/rxe_resp.c
+++ b/drivers/infiniband/sw/rxe/rxe_resp.c
@@ -995,7 +995,9 @@
free_rd_atomic_resource(qp, res);
rxe_advance_resp_resource(qp);
- memcpy(SKB_TO_PKT(skb), &ack_pkt, sizeof(skb->cb));
+ memcpy(SKB_TO_PKT(skb), &ack_pkt, sizeof(ack_pkt));
+ memset((unsigned char *)SKB_TO_PKT(skb) + sizeof(ack_pkt), 0,
+ sizeof(skb->cb) - sizeof(ack_pkt));
res->type = RXE_ATOMIC_MASK;
res->atomic.skb = skb;
@@ -1217,6 +1219,9 @@
kfree_skb(skb);
}
+ if (notify)
+ return;
+
while (!qp->srq && qp->rq.queue && queue_head(qp->rq.queue))
advance_consumer(qp->rq.queue);
}
diff --git a/drivers/infiniband/sw/rxe/rxe_verbs.c b/drivers/infiniband/sw/rxe/rxe_verbs.c
index 073e667..af90a7d 100644
--- a/drivers/infiniband/sw/rxe/rxe_verbs.c
+++ b/drivers/infiniband/sw/rxe/rxe_verbs.c
@@ -914,6 +914,9 @@
spin_unlock_irqrestore(&rq->producer_lock, flags);
+ if (qp->resp.state == QP_STATE_ERROR)
+ rxe_run_task(&qp->resp.task, 1);
+
err1:
return err;
}
@@ -1240,6 +1243,8 @@
addrconf_addr_eui48((unsigned char *)&dev->node_guid,
rxe->ndev->dev_addr);
dev->dev.dma_ops = &dma_virt_ops;
+ dma_coerce_mask_and_coherent(&dev->dev,
+ dma_get_required_mask(dev->dev.parent));
dev->uverbs_abi_ver = RXE_UVERBS_ABI_VERSION;
dev->uverbs_cmd_mask = BIT_ULL(IB_USER_VERBS_CMD_GET_CONTEXT)
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
index 7cbcfda..f87d104 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
@@ -39,6 +39,7 @@
#include <linux/vmalloc.h>
#include <linux/moduleparam.h>
#include <linux/sched/signal.h>
+#include <linux/sched/mm.h>
#include "ipoib.h"
@@ -954,7 +955,7 @@
break;
}
spin_unlock_irq(&priv->lock);
- msleep(1);
+ usleep_range(1000, 2000);
ipoib_drain_cq(dev);
spin_lock_irq(&priv->lock);
}
@@ -1047,9 +1048,8 @@
.sq_sig_type = IB_SIGNAL_ALL_WR,
.qp_type = IB_QPT_RC,
.qp_context = tx,
- .create_flags = IB_QP_CREATE_USE_GFP_NOIO
+ .create_flags = 0
};
-
struct ib_qp *tx_qp;
if (dev->features & NETIF_F_SG)
@@ -1057,10 +1057,6 @@
min_t(u32, priv->ca->attrs.max_sge, MAX_SKB_FRAGS + 1);
tx_qp = ib_create_qp(priv->pd, &attr);
- if (PTR_ERR(tx_qp) == -EINVAL) {
- attr.create_flags &= ~IB_QP_CREATE_USE_GFP_NOIO;
- tx_qp = ib_create_qp(priv->pd, &attr);
- }
tx->max_send_sge = attr.cap.max_send_sge;
return tx_qp;
}
@@ -1131,10 +1127,11 @@
struct sa_path_rec *pathrec)
{
struct ipoib_dev_priv *priv = ipoib_priv(p->dev);
+ unsigned int noio_flag;
int ret;
- p->tx_ring = __vmalloc(ipoib_sendq_size * sizeof *p->tx_ring,
- GFP_NOIO, PAGE_KERNEL);
+ noio_flag = memalloc_noio_save();
+ p->tx_ring = vzalloc(ipoib_sendq_size * sizeof(*p->tx_ring));
if (!p->tx_ring) {
ret = -ENOMEM;
goto err_tx;
@@ -1142,9 +1139,10 @@
memset(p->tx_ring, 0, ipoib_sendq_size * sizeof *p->tx_ring);
p->qp = ipoib_cm_create_tx_qp(p->dev, p);
+ memalloc_noio_restore(noio_flag);
if (IS_ERR(p->qp)) {
ret = PTR_ERR(p->qp);
- ipoib_warn(priv, "failed to allocate tx qp: %d\n", ret);
+ ipoib_warn(priv, "failed to create tx qp: %d\n", ret);
goto err_qp;
}
@@ -1206,7 +1204,7 @@
goto timeout;
}
- msleep(1);
+ usleep_range(1000, 2000);
}
}
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
index efe7402..57a9655 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
@@ -770,7 +770,7 @@
ipoib_drain_cq(dev);
- msleep(1);
+ usleep_range(1000, 2000);
}
ipoib_dbg(priv, "All sends and receives done.\n");
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index 6e86eee..4ce315c 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -233,6 +233,7 @@
static int ipoib_change_mtu(struct net_device *dev, int new_mtu)
{
struct ipoib_dev_priv *priv = ipoib_priv(dev);
+ int ret = 0;
/* dev->mtu > 2K ==> connected mode */
if (ipoib_cm_admin_enabled(dev)) {
@@ -256,9 +257,34 @@
ipoib_dbg(priv, "MTU must be smaller than the underlying "
"link layer MTU - 4 (%u)\n", priv->mcast_mtu);
- dev->mtu = min(priv->mcast_mtu, priv->admin_mtu);
+ new_mtu = min(priv->mcast_mtu, priv->admin_mtu);
- return 0;
+ if (priv->rn_ops->ndo_change_mtu) {
+ bool carrier_status = netif_carrier_ok(dev);
+
+ netif_carrier_off(dev);
+
+ /* notify lower level on the real mtu */
+ ret = priv->rn_ops->ndo_change_mtu(dev, new_mtu);
+
+ if (carrier_status)
+ netif_carrier_on(dev);
+ } else {
+ dev->mtu = new_mtu;
+ }
+
+ return ret;
+}
+
+static void ipoib_get_stats(struct net_device *dev,
+ struct rtnl_link_stats64 *stats)
+{
+ struct ipoib_dev_priv *priv = ipoib_priv(dev);
+
+ if (priv->rn_ops->ndo_get_stats64)
+ priv->rn_ops->ndo_get_stats64(dev, stats);
+ else
+ netdev_stats_to_stats64(stats, &dev->stats);
}
/* Called with an RCU read lock taken */
@@ -1808,6 +1834,7 @@
.ndo_get_vf_stats = ipoib_get_vf_stats,
.ndo_set_vf_guid = ipoib_set_vf_guid,
.ndo_set_mac_address = ipoib_set_mac,
+ .ndo_get_stats64 = ipoib_get_stats,
};
static const struct net_device_ops ipoib_netdev_ops_vf = {
@@ -2212,6 +2239,7 @@
goto register_failed;
}
+ result = -ENOMEM;
if (ipoib_cm_add_mode_attr(priv->dev))
goto sysfs_failed;
if (ipoib_add_pkey_attr(priv->dev))
diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c
index 5a887ef..37b33d7 100644
--- a/drivers/infiniband/ulp/iser/iscsi_iser.c
+++ b/drivers/infiniband/ulp/iser/iscsi_iser.c
@@ -83,6 +83,7 @@
static struct iscsi_transport iscsi_iser_transport;
static struct scsi_transport_template *iscsi_iser_scsi_transport;
static struct workqueue_struct *release_wq;
+static DEFINE_MUTEX(unbind_iser_conn_mutex);
struct iser_global ig;
int iser_debug_level = 0;
@@ -550,12 +551,14 @@
*/
if (iser_conn) {
mutex_lock(&iser_conn->state_mutex);
+ mutex_lock(&unbind_iser_conn_mutex);
iser_conn_terminate(iser_conn);
iscsi_conn_stop(cls_conn, flag);
/* unbind */
iser_conn->iscsi_conn = NULL;
conn->dd_data = NULL;
+ mutex_unlock(&unbind_iser_conn_mutex);
complete(&iser_conn->stop_completion);
mutex_unlock(&iser_conn->state_mutex);
@@ -977,13 +980,21 @@
struct iser_conn *iser_conn;
struct ib_device *ib_dev;
+ mutex_lock(&unbind_iser_conn_mutex);
+
session = starget_to_session(scsi_target(sdev))->dd_data;
iser_conn = session->leadconn->dd_data;
+ if (!iser_conn) {
+ mutex_unlock(&unbind_iser_conn_mutex);
+ return -ENOTCONN;
+ }
ib_dev = iser_conn->ib_conn.device->ib_device;
if (!(ib_dev->attrs.device_cap_flags & IB_DEVICE_SG_GAPS_REG))
blk_queue_virt_boundary(sdev->request_queue, ~MASK_4K);
+ mutex_unlock(&unbind_iser_conn_mutex);
+
return 0;
}
diff --git a/drivers/infiniband/ulp/iser/iser_initiator.c b/drivers/infiniband/ulp/iser/iser_initiator.c
index 12ed62c..2a07692 100644
--- a/drivers/infiniband/ulp/iser/iser_initiator.c
+++ b/drivers/infiniband/ulp/iser/iser_initiator.c
@@ -137,8 +137,10 @@
if (unsol_sz < edtl) {
hdr->flags |= ISER_WSV;
- hdr->write_stag = cpu_to_be32(mem_reg->rkey);
- hdr->write_va = cpu_to_be64(mem_reg->sge.addr + unsol_sz);
+ if (buf_out->data_len > imm_sz) {
+ hdr->write_stag = cpu_to_be32(mem_reg->rkey);
+ hdr->write_va = cpu_to_be64(mem_reg->sge.addr + unsol_sz);
+ }
iser_dbg("Cmd itt:%d, WRITE tags, RKEY:%#.4X "
"VA:%#llX + unsol:%d\n",
diff --git a/drivers/infiniband/ulp/iser/iser_verbs.c b/drivers/infiniband/ulp/iser/iser_verbs.c
index c538a38..26a004e 100644
--- a/drivers/infiniband/ulp/iser/iser_verbs.c
+++ b/drivers/infiniband/ulp/iser/iser_verbs.c
@@ -708,8 +708,14 @@
unsigned short sg_tablesize, sup_sg_tablesize;
sg_tablesize = DIV_ROUND_UP(max_sectors * 512, SIZE_4K);
- sup_sg_tablesize = min_t(unsigned, ISCSI_ISER_MAX_SG_TABLESIZE,
- device->ib_device->attrs.max_fast_reg_page_list_len);
+ if (device->ib_device->attrs.device_cap_flags &
+ IB_DEVICE_MEM_MGT_EXTENSIONS)
+ sup_sg_tablesize =
+ min_t(
+ uint, ISCSI_ISER_MAX_SG_TABLESIZE,
+ device->ib_device->attrs.max_fast_reg_page_list_len);
+ else
+ sup_sg_tablesize = ISCSI_ISER_MAX_SG_TABLESIZE;
iser_conn->scsi_sg_tablesize = min(sg_tablesize, sup_sg_tablesize);
}
diff --git a/drivers/infiniband/ulp/isert/ib_isert.c b/drivers/infiniband/ulp/isert/ib_isert.c
index fcbed35..0e66265 100644
--- a/drivers/infiniband/ulp/isert/ib_isert.c
+++ b/drivers/infiniband/ulp/isert/ib_isert.c
@@ -1452,7 +1452,7 @@
isert_login_recv_done(struct ib_cq *cq, struct ib_wc *wc)
{
struct isert_conn *isert_conn = wc->qp->qp_context;
- struct ib_device *ib_dev = isert_conn->cm_id->device;
+ struct ib_device *ib_dev = isert_conn->device->ib_device;
if (unlikely(wc->status != IB_WC_SUCCESS)) {
isert_print_wc(wc, "login recv");
diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c
index 1ced073..402275b 100644
--- a/drivers/infiniband/ulp/srpt/ib_srpt.c
+++ b/drivers/infiniband/ulp/srpt/ib_srpt.c
@@ -1157,8 +1157,8 @@
}
spin_unlock_irqrestore(&ioctx->spinlock, flags);
- pr_debug("Aborting cmd with state %d and tag %lld\n", state,
- ioctx->cmd.tag);
+ pr_debug("Aborting cmd with state %d -> %d and tag %lld\n", state,
+ ioctx->state, ioctx->cmd.tag);
switch (state) {
case SRPT_STATE_NEW:
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index da3d362..a047b9a 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -48,6 +48,7 @@
spinlock_t lock;
bool disabled;
bool key_pressed;
+ bool suspended;
};
struct gpio_keys_drvdata {
@@ -396,8 +397,20 @@
BUG_ON(irq != bdata->irq);
- if (bdata->button->wakeup)
+ if (bdata->button->wakeup) {
+ const struct gpio_keys_button *button = bdata->button;
+
pm_stay_awake(bdata->input->dev.parent);
+ if (bdata->suspended &&
+ (button->type == 0 || button->type == EV_KEY)) {
+ /*
+ * Simulate wakeup key press in case the key has
+ * already released by the time we got interrupt
+ * handler to run.
+ */
+ input_report_key(bdata->input, button->code, 1);
+ }
+ }
mod_delayed_work(system_wq,
&bdata->work,
@@ -855,6 +868,7 @@
struct gpio_button_data *bdata = &ddata->data[i];
if (bdata->button->wakeup)
enable_irq_wake(bdata->irq);
+ bdata->suspended = true;
}
} else {
mutex_lock(&input->mutex);
@@ -878,6 +892,7 @@
struct gpio_button_data *bdata = &ddata->data[i];
if (bdata->button->wakeup)
disable_irq_wake(bdata->irq);
+ bdata->suspended = false;
}
} else {
mutex_lock(&input->mutex);
diff --git a/drivers/input/misc/xen-kbdfront.c b/drivers/input/misc/xen-kbdfront.c
index eb77061..fa130e7 100644
--- a/drivers/input/misc/xen-kbdfront.c
+++ b/drivers/input/misc/xen-kbdfront.c
@@ -17,6 +17,7 @@
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/input.h>
+#include <linux/input/mt.h>
#include <linux/slab.h>
#include <asm/xen/hypervisor.h>
@@ -34,11 +35,14 @@
struct xenkbd_info {
struct input_dev *kbd;
struct input_dev *ptr;
+ struct input_dev *mtouch;
struct xenkbd_page *page;
int gref;
int irq;
struct xenbus_device *xbdev;
char phys[32];
+ /* current MT slot/contact ID we are injecting events in */
+ int mtouch_cur_contact_id;
};
enum { KPARAM_X, KPARAM_Y, KPARAM_CNT };
@@ -56,6 +60,112 @@
* to do that.
*/
+static void xenkbd_handle_motion_event(struct xenkbd_info *info,
+ struct xenkbd_motion *motion)
+{
+ input_report_rel(info->ptr, REL_X, motion->rel_x);
+ input_report_rel(info->ptr, REL_Y, motion->rel_y);
+ if (motion->rel_z)
+ input_report_rel(info->ptr, REL_WHEEL, -motion->rel_z);
+ input_sync(info->ptr);
+}
+
+static void xenkbd_handle_position_event(struct xenkbd_info *info,
+ struct xenkbd_position *pos)
+{
+ input_report_abs(info->ptr, ABS_X, pos->abs_x);
+ input_report_abs(info->ptr, ABS_Y, pos->abs_y);
+ if (pos->rel_z)
+ input_report_rel(info->ptr, REL_WHEEL, -pos->rel_z);
+ input_sync(info->ptr);
+}
+
+static void xenkbd_handle_key_event(struct xenkbd_info *info,
+ struct xenkbd_key *key)
+{
+ struct input_dev *dev;
+
+ if (test_bit(key->keycode, info->ptr->keybit)) {
+ dev = info->ptr;
+ } else if (test_bit(key->keycode, info->kbd->keybit)) {
+ dev = info->kbd;
+ } else {
+ pr_warn("unhandled keycode 0x%x\n", key->keycode);
+ return;
+ }
+
+ input_report_key(dev, key->keycode, key->pressed);
+ input_sync(dev);
+}
+
+static void xenkbd_handle_mt_event(struct xenkbd_info *info,
+ struct xenkbd_mtouch *mtouch)
+{
+ if (unlikely(!info->mtouch))
+ return;
+
+ if (mtouch->contact_id != info->mtouch_cur_contact_id) {
+ info->mtouch_cur_contact_id = mtouch->contact_id;
+ input_mt_slot(info->mtouch, mtouch->contact_id);
+ }
+
+ switch (mtouch->event_type) {
+ case XENKBD_MT_EV_DOWN:
+ input_mt_report_slot_state(info->mtouch, MT_TOOL_FINGER, true);
+ /* fall through */
+
+ case XENKBD_MT_EV_MOTION:
+ input_report_abs(info->mtouch, ABS_MT_POSITION_X,
+ mtouch->u.pos.abs_x);
+ input_report_abs(info->mtouch, ABS_MT_POSITION_Y,
+ mtouch->u.pos.abs_y);
+ break;
+
+ case XENKBD_MT_EV_SHAPE:
+ input_report_abs(info->mtouch, ABS_MT_TOUCH_MAJOR,
+ mtouch->u.shape.major);
+ input_report_abs(info->mtouch, ABS_MT_TOUCH_MINOR,
+ mtouch->u.shape.minor);
+ break;
+
+ case XENKBD_MT_EV_ORIENT:
+ input_report_abs(info->mtouch, ABS_MT_ORIENTATION,
+ mtouch->u.orientation);
+ break;
+
+ case XENKBD_MT_EV_UP:
+ input_mt_report_slot_state(info->mtouch, MT_TOOL_FINGER, false);
+ break;
+
+ case XENKBD_MT_EV_SYN:
+ input_mt_sync_frame(info->mtouch);
+ input_sync(info->mtouch);
+ break;
+ }
+}
+
+static void xenkbd_handle_event(struct xenkbd_info *info,
+ union xenkbd_in_event *event)
+{
+ switch (event->type) {
+ case XENKBD_TYPE_MOTION:
+ xenkbd_handle_motion_event(info, &event->motion);
+ break;
+
+ case XENKBD_TYPE_KEY:
+ xenkbd_handle_key_event(info, &event->key);
+ break;
+
+ case XENKBD_TYPE_POS:
+ xenkbd_handle_position_event(info, &event->pos);
+ break;
+
+ case XENKBD_TYPE_MTOUCH:
+ xenkbd_handle_mt_event(info, &event->mtouch);
+ break;
+ }
+}
+
static irqreturn_t input_handler(int rq, void *dev_id)
{
struct xenkbd_info *info = dev_id;
@@ -66,44 +176,8 @@
if (prod == page->in_cons)
return IRQ_HANDLED;
rmb(); /* ensure we see ring contents up to prod */
- for (cons = page->in_cons; cons != prod; cons++) {
- union xenkbd_in_event *event;
- struct input_dev *dev;
- event = &XENKBD_IN_RING_REF(page, cons);
-
- dev = info->ptr;
- switch (event->type) {
- case XENKBD_TYPE_MOTION:
- input_report_rel(dev, REL_X, event->motion.rel_x);
- input_report_rel(dev, REL_Y, event->motion.rel_y);
- if (event->motion.rel_z)
- input_report_rel(dev, REL_WHEEL,
- -event->motion.rel_z);
- break;
- case XENKBD_TYPE_KEY:
- dev = NULL;
- if (test_bit(event->key.keycode, info->kbd->keybit))
- dev = info->kbd;
- if (test_bit(event->key.keycode, info->ptr->keybit))
- dev = info->ptr;
- if (dev)
- input_report_key(dev, event->key.keycode,
- event->key.pressed);
- else
- pr_warn("unhandled keycode 0x%x\n",
- event->key.keycode);
- break;
- case XENKBD_TYPE_POS:
- input_report_abs(dev, ABS_X, event->pos.abs_x);
- input_report_abs(dev, ABS_Y, event->pos.abs_y);
- if (event->pos.rel_z)
- input_report_rel(dev, REL_WHEEL,
- -event->pos.rel_z);
- break;
- }
- if (dev)
- input_sync(dev);
- }
+ for (cons = page->in_cons; cons != prod; cons++)
+ xenkbd_handle_event(info, &XENKBD_IN_RING_REF(page, cons));
mb(); /* ensure we got ring contents */
page->in_cons = cons;
notify_remote_via_irq(info->irq);
@@ -115,9 +189,9 @@
const struct xenbus_device_id *id)
{
int ret, i;
- unsigned int abs;
+ unsigned int abs, touch;
struct xenkbd_info *info;
- struct input_dev *kbd, *ptr;
+ struct input_dev *kbd, *ptr, *mtouch;
info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info) {
@@ -152,6 +226,17 @@
}
}
+ touch = xenbus_read_unsigned(dev->nodename,
+ XENKBD_FIELD_FEAT_MTOUCH, 0);
+ if (touch) {
+ ret = xenbus_write(XBT_NIL, dev->nodename,
+ XENKBD_FIELD_REQ_MTOUCH, "1");
+ if (ret) {
+ pr_warn("xenkbd: can't request multi-touch");
+ touch = 0;
+ }
+ }
+
/* keyboard */
kbd = input_allocate_device();
if (!kbd)
@@ -208,6 +293,58 @@
}
info->ptr = ptr;
+ /* multi-touch device */
+ if (touch) {
+ int num_cont, width, height;
+
+ mtouch = input_allocate_device();
+ if (!mtouch)
+ goto error_nomem;
+
+ num_cont = xenbus_read_unsigned(info->xbdev->nodename,
+ XENKBD_FIELD_MT_NUM_CONTACTS,
+ 1);
+ width = xenbus_read_unsigned(info->xbdev->nodename,
+ XENKBD_FIELD_MT_WIDTH,
+ XENFB_WIDTH);
+ height = xenbus_read_unsigned(info->xbdev->nodename,
+ XENKBD_FIELD_MT_HEIGHT,
+ XENFB_HEIGHT);
+
+ mtouch->name = "Xen Virtual Multi-touch";
+ mtouch->phys = info->phys;
+ mtouch->id.bustype = BUS_PCI;
+ mtouch->id.vendor = 0x5853;
+ mtouch->id.product = 0xfffd;
+
+ input_set_abs_params(mtouch, ABS_MT_TOUCH_MAJOR,
+ 0, 255, 0, 0);
+ input_set_abs_params(mtouch, ABS_MT_POSITION_X,
+ 0, width, 0, 0);
+ input_set_abs_params(mtouch, ABS_MT_POSITION_Y,
+ 0, height, 0, 0);
+ input_set_abs_params(mtouch, ABS_MT_PRESSURE,
+ 0, 255, 0, 0);
+
+ ret = input_mt_init_slots(mtouch, num_cont, INPUT_MT_DIRECT);
+ if (ret) {
+ input_free_device(mtouch);
+ xenbus_dev_fatal(info->xbdev, ret,
+ "input_mt_init_slots");
+ goto error;
+ }
+
+ ret = input_register_device(mtouch);
+ if (ret) {
+ input_free_device(mtouch);
+ xenbus_dev_fatal(info->xbdev, ret,
+ "input_register_device(mtouch)");
+ goto error;
+ }
+ info->mtouch_cur_contact_id = -1;
+ info->mtouch = mtouch;
+ }
+
ret = xenkbd_connect_backend(dev, info);
if (ret < 0)
goto error;
@@ -240,6 +377,8 @@
input_unregister_device(info->kbd);
if (info->ptr)
input_unregister_device(info->ptr);
+ if (info->mtouch)
+ input_unregister_device(info->mtouch);
free_page((unsigned long)info->page);
kfree(info);
return 0;
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index c52da65..824f4c1 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -436,8 +436,10 @@
{
struct i8042_port *port = serio->port_data;
+ spin_lock_irq(&i8042_lock);
port->exists = true;
- mb();
+ spin_unlock_irq(&i8042_lock);
+
return 0;
}
@@ -450,16 +452,20 @@
{
struct i8042_port *port = serio->port_data;
+ spin_lock_irq(&i8042_lock);
port->exists = false;
+ port->serio = NULL;
+ spin_unlock_irq(&i8042_lock);
/*
+ * We need to make sure that interrupt handler finishes using
+ * our serio port before we return from this function.
* We synchronize with both AUX and KBD IRQs because there is
* a (very unlikely) chance that AUX IRQ is raised for KBD port
* and vice versa.
*/
synchronize_irq(I8042_AUX_IRQ);
synchronize_irq(I8042_KBD_IRQ);
- port->serio = NULL;
}
/*
@@ -576,7 +582,7 @@
spin_unlock_irqrestore(&i8042_lock, flags);
- if (likely(port->exists && !filtered))
+ if (likely(serio && !filtered))
serio_interrupt(serio, data, dfl);
out:
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 6ee3a25..f73ff28 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -23,7 +23,7 @@
config IOMMU_IO_PGTABLE_LPAE
bool "ARMv7/v8 Long Descriptor Format"
select IOMMU_IO_PGTABLE
- depends on HAS_DMA && (ARM || ARM64 || COMPILE_TEST)
+ depends on HAS_DMA && (ARM || ARM64 || (COMPILE_TEST && !GENERIC_ATOMIC64))
help
Enable support for the ARM long descriptor pagetable format.
This allocator supports 4K/2M/1G, 16K/32M and 64K/512M page
@@ -219,7 +219,7 @@
config ROCKCHIP_IOMMU
bool "Rockchip IOMMU Support"
- depends on ARM
+ depends on ARM || ARM64
depends on ARCH_ROCKCHIP || COMPILE_TEST
select IOMMU_API
select ARM_DMA_USE_IOMMU
@@ -274,7 +274,7 @@
config IPMMU_VMSA
bool "Renesas VMSA-compatible IPMMU"
- depends on ARM_LPAE
+ depends on ARM || IOMMU_DMA
depends on ARCH_RENESAS || COMPILE_TEST
select IOMMU_API
select IOMMU_IO_PGTABLE_LPAE
diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index f16d0f2..354cbd6 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -91,25 +91,6 @@
LIST_HEAD(hpet_map);
LIST_HEAD(acpihid_map);
-#define FLUSH_QUEUE_SIZE 256
-
-struct flush_queue_entry {
- unsigned long iova_pfn;
- unsigned long pages;
- struct dma_ops_domain *dma_dom;
-};
-
-struct flush_queue {
- spinlock_t lock;
- unsigned next;
- struct flush_queue_entry *entries;
-};
-
-static DEFINE_PER_CPU(struct flush_queue, flush_queue);
-
-static atomic_t queue_timer_on;
-static struct timer_list queue_timer;
-
/*
* Domain for untranslated devices - only allocated
* if iommu=pt passed on kernel cmd line.
@@ -140,6 +121,8 @@
PPR completions */
u32 errata; /* Bitmap for errata to apply */
bool use_vapic; /* Enable device to use vapic mode */
+
+ struct ratelimit_state rs; /* Ratelimit IOPF messages */
};
/*
@@ -155,6 +138,20 @@
static int protection_domain_init(struct protection_domain *domain);
static void detach_device(struct device *dev);
+#define FLUSH_QUEUE_SIZE 256
+
+struct flush_queue_entry {
+ unsigned long iova_pfn;
+ unsigned long pages;
+ u64 counter; /* Flush counter when this entry was added to the queue */
+};
+
+struct flush_queue {
+ struct flush_queue_entry *entries;
+ unsigned head, tail;
+ spinlock_t lock;
+};
+
/*
* Data container for a dma_ops specific protection domain
*/
@@ -164,6 +161,36 @@
/* IOVA RB-Tree */
struct iova_domain iovad;
+
+ struct flush_queue __percpu *flush_queue;
+
+ /*
+ * We need two counter here to be race-free wrt. IOTLB flushing and
+ * adding entries to the flush queue.
+ *
+ * The flush_start_cnt is incremented _before_ the IOTLB flush starts.
+ * New entries added to the flush ring-buffer get their 'counter' value
+ * from here. This way we can make sure that entries added to the queue
+ * (or other per-cpu queues of the same domain) while the TLB is about
+ * to be flushed are not considered to be flushed already.
+ */
+ atomic64_t flush_start_cnt;
+
+ /*
+ * The flush_finish_cnt is incremented when an IOTLB flush is complete.
+ * This value is always smaller than flush_start_cnt. The queue_add
+ * function frees all IOVAs that have a counter value smaller than
+ * flush_finish_cnt. This makes sure that we only free IOVAs that are
+ * flushed out of the IOTLB of the domain.
+ */
+ atomic64_t flush_finish_cnt;
+
+ /*
+ * Timer to make sure we don't keep IOVAs around unflushed
+ * for too long
+ */
+ struct timer_list flush_timer;
+ atomic_t flush_timer_on;
};
static struct iova_domain reserved_iova_ranges;
@@ -255,6 +282,8 @@
list_add_tail(&dev_data->dev_data_list, &dev_data_list);
spin_unlock_irqrestore(&dev_data_list_lock, flags);
+ ratelimit_default_init(&dev_data->rs);
+
return dev_data;
}
@@ -553,6 +582,29 @@
pr_err("AMD-Vi: CMD[%d]: %08x\n", i, cmd->data[i]);
}
+static void amd_iommu_report_page_fault(u16 devid, u16 domain_id,
+ u64 address, int flags)
+{
+ struct iommu_dev_data *dev_data = NULL;
+ struct pci_dev *pdev;
+
+ pdev = pci_get_bus_and_slot(PCI_BUS_NUM(devid), devid & 0xff);
+ if (pdev)
+ dev_data = get_dev_data(&pdev->dev);
+
+ if (dev_data && __ratelimit(&dev_data->rs)) {
+ dev_err(&pdev->dev, "AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x%04x address=0x%016llx flags=0x%04x]\n",
+ domain_id, address, flags);
+ } else if (printk_ratelimit()) {
+ pr_err("AMD-Vi: Event logged [IO_PAGE_FAULT device=%02x:%02x.%x domain=0x%04x address=0x%016llx flags=0x%04x]\n",
+ PCI_BUS_NUM(devid), PCI_SLOT(devid), PCI_FUNC(devid),
+ domain_id, address, flags);
+ }
+
+ if (pdev)
+ pci_dev_put(pdev);
+}
+
static void iommu_print_event(struct amd_iommu *iommu, void *__evt)
{
int type, devid, domid, flags;
@@ -577,7 +629,12 @@
goto retry;
}
- printk(KERN_ERR "AMD-Vi: Event logged [");
+ if (type == EVENT_TYPE_IO_FAULT) {
+ amd_iommu_report_page_fault(devid, domid, address, flags);
+ return;
+ } else {
+ printk(KERN_ERR "AMD-Vi: Event logged [");
+ }
switch (type) {
case EVENT_TYPE_ILL_DEV:
@@ -587,12 +644,6 @@
address, flags);
dump_dte_entry(devid);
break;
- case EVENT_TYPE_IO_FAULT:
- printk("IO_PAGE_FAULT device=%02x:%02x.%x "
- "domain=0x%04x address=0x%016llx flags=0x%04x]\n",
- PCI_BUS_NUM(devid), PCI_SLOT(devid), PCI_FUNC(devid),
- domid, address, flags);
- break;
case EVENT_TYPE_DEV_TAB_ERR:
printk("DEV_TAB_HARDWARE_ERROR device=%02x:%02x.%x "
"address=0x%016llx flags=0x%04x]\n",
@@ -850,19 +901,20 @@
}
static void copy_cmd_to_buffer(struct amd_iommu *iommu,
- struct iommu_cmd *cmd,
- u32 tail)
+ struct iommu_cmd *cmd)
{
u8 *target;
- target = iommu->cmd_buf + tail;
- tail = (tail + sizeof(*cmd)) % CMD_BUFFER_SIZE;
+ target = iommu->cmd_buf + iommu->cmd_buf_tail;
+
+ iommu->cmd_buf_tail += sizeof(*cmd);
+ iommu->cmd_buf_tail %= CMD_BUFFER_SIZE;
/* Copy command to buffer */
memcpy(target, cmd, sizeof(*cmd));
/* Tell the IOMMU about it */
- writel(tail, iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
+ writel(iommu->cmd_buf_tail, iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
}
static void build_completion_wait(struct iommu_cmd *cmd, u64 address)
@@ -1020,33 +1072,34 @@
struct iommu_cmd *cmd,
bool sync)
{
- u32 left, tail, head, next_tail;
+ unsigned int count = 0;
+ u32 left, next_tail;
+ next_tail = (iommu->cmd_buf_tail + sizeof(*cmd)) % CMD_BUFFER_SIZE;
again:
-
- head = readl(iommu->mmio_base + MMIO_CMD_HEAD_OFFSET);
- tail = readl(iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
- next_tail = (tail + sizeof(*cmd)) % CMD_BUFFER_SIZE;
- left = (head - next_tail) % CMD_BUFFER_SIZE;
+ left = (iommu->cmd_buf_head - next_tail) % CMD_BUFFER_SIZE;
if (left <= 0x20) {
- struct iommu_cmd sync_cmd;
- int ret;
+ /* Skip udelay() the first time around */
+ if (count++) {
+ if (count == LOOP_TIMEOUT) {
+ pr_err("AMD-Vi: Command buffer timeout\n");
+ return -EIO;
+ }
- iommu->cmd_sem = 0;
+ udelay(1);
+ }
- build_completion_wait(&sync_cmd, (u64)&iommu->cmd_sem);
- copy_cmd_to_buffer(iommu, &sync_cmd, tail);
-
- if ((ret = wait_on_sem(&iommu->cmd_sem)) != 0)
- return ret;
+ /* Update head and recheck remaining space */
+ iommu->cmd_buf_head = readl(iommu->mmio_base +
+ MMIO_CMD_HEAD_OFFSET);
goto again;
}
- copy_cmd_to_buffer(iommu, cmd, tail);
+ copy_cmd_to_buffer(iommu, cmd);
- /* We need to sync now to make sure all commands are processed */
+ /* Do we need to make sure all commands are processed? */
iommu->need_sync = sync;
return 0;
@@ -1735,6 +1788,180 @@
free_page((unsigned long)domain->gcr3_tbl);
}
+static void dma_ops_domain_free_flush_queue(struct dma_ops_domain *dom)
+{
+ int cpu;
+
+ for_each_possible_cpu(cpu) {
+ struct flush_queue *queue;
+
+ queue = per_cpu_ptr(dom->flush_queue, cpu);
+ kfree(queue->entries);
+ }
+
+ free_percpu(dom->flush_queue);
+
+ dom->flush_queue = NULL;
+}
+
+static int dma_ops_domain_alloc_flush_queue(struct dma_ops_domain *dom)
+{
+ int cpu;
+
+ atomic64_set(&dom->flush_start_cnt, 0);
+ atomic64_set(&dom->flush_finish_cnt, 0);
+
+ dom->flush_queue = alloc_percpu(struct flush_queue);
+ if (!dom->flush_queue)
+ return -ENOMEM;
+
+ /* First make sure everything is cleared */
+ for_each_possible_cpu(cpu) {
+ struct flush_queue *queue;
+
+ queue = per_cpu_ptr(dom->flush_queue, cpu);
+ queue->head = 0;
+ queue->tail = 0;
+ queue->entries = NULL;
+ }
+
+ /* Now start doing the allocation */
+ for_each_possible_cpu(cpu) {
+ struct flush_queue *queue;
+
+ queue = per_cpu_ptr(dom->flush_queue, cpu);
+ queue->entries = kzalloc(FLUSH_QUEUE_SIZE * sizeof(*queue->entries),
+ GFP_KERNEL);
+ if (!queue->entries) {
+ dma_ops_domain_free_flush_queue(dom);
+ return -ENOMEM;
+ }
+
+ spin_lock_init(&queue->lock);
+ }
+
+ return 0;
+}
+
+static void dma_ops_domain_flush_tlb(struct dma_ops_domain *dom)
+{
+ atomic64_inc(&dom->flush_start_cnt);
+ domain_flush_tlb(&dom->domain);
+ domain_flush_complete(&dom->domain);
+ atomic64_inc(&dom->flush_finish_cnt);
+}
+
+static inline bool queue_ring_full(struct flush_queue *queue)
+{
+ assert_spin_locked(&queue->lock);
+
+ return (((queue->tail + 1) % FLUSH_QUEUE_SIZE) == queue->head);
+}
+
+#define queue_ring_for_each(i, q) \
+ for (i = (q)->head; i != (q)->tail; i = (i + 1) % FLUSH_QUEUE_SIZE)
+
+static inline unsigned queue_ring_add(struct flush_queue *queue)
+{
+ unsigned idx = queue->tail;
+
+ assert_spin_locked(&queue->lock);
+ queue->tail = (idx + 1) % FLUSH_QUEUE_SIZE;
+
+ return idx;
+}
+
+static inline void queue_ring_remove_head(struct flush_queue *queue)
+{
+ assert_spin_locked(&queue->lock);
+ queue->head = (queue->head + 1) % FLUSH_QUEUE_SIZE;
+}
+
+static void queue_ring_free_flushed(struct dma_ops_domain *dom,
+ struct flush_queue *queue)
+{
+ u64 counter = atomic64_read(&dom->flush_finish_cnt);
+ int idx;
+
+ queue_ring_for_each(idx, queue) {
+ /*
+ * This assumes that counter values in the ring-buffer are
+ * monotonously rising.
+ */
+ if (queue->entries[idx].counter >= counter)
+ break;
+
+ free_iova_fast(&dom->iovad,
+ queue->entries[idx].iova_pfn,
+ queue->entries[idx].pages);
+
+ queue_ring_remove_head(queue);
+ }
+}
+
+static void queue_add(struct dma_ops_domain *dom,
+ unsigned long address, unsigned long pages)
+{
+ struct flush_queue *queue;
+ unsigned long flags;
+ int idx;
+
+ pages = __roundup_pow_of_two(pages);
+ address >>= PAGE_SHIFT;
+
+ queue = get_cpu_ptr(dom->flush_queue);
+ spin_lock_irqsave(&queue->lock, flags);
+
+ /*
+ * First remove the enries from the ring-buffer that are already
+ * flushed to make the below queue_ring_full() check less likely
+ */
+ queue_ring_free_flushed(dom, queue);
+
+ /*
+ * When ring-queue is full, flush the entries from the IOTLB so
+ * that we can free all entries with queue_ring_free_flushed()
+ * below.
+ */
+ if (queue_ring_full(queue)) {
+ dma_ops_domain_flush_tlb(dom);
+ queue_ring_free_flushed(dom, queue);
+ }
+
+ idx = queue_ring_add(queue);
+
+ queue->entries[idx].iova_pfn = address;
+ queue->entries[idx].pages = pages;
+ queue->entries[idx].counter = atomic64_read(&dom->flush_start_cnt);
+
+ spin_unlock_irqrestore(&queue->lock, flags);
+
+ if (atomic_cmpxchg(&dom->flush_timer_on, 0, 1) == 0)
+ mod_timer(&dom->flush_timer, jiffies + msecs_to_jiffies(10));
+
+ put_cpu_ptr(dom->flush_queue);
+}
+
+static void queue_flush_timeout(unsigned long data)
+{
+ struct dma_ops_domain *dom = (struct dma_ops_domain *)data;
+ int cpu;
+
+ atomic_set(&dom->flush_timer_on, 0);
+
+ dma_ops_domain_flush_tlb(dom);
+
+ for_each_possible_cpu(cpu) {
+ struct flush_queue *queue;
+ unsigned long flags;
+
+ queue = per_cpu_ptr(dom->flush_queue, cpu);
+ spin_lock_irqsave(&queue->lock, flags);
+ queue_ring_free_flushed(dom, queue);
+ spin_unlock_irqrestore(&queue->lock, flags);
+ }
+}
+
/*
* Free a domain, only used if something went wrong in the
* allocation path and we need to free an already allocated page table
@@ -1746,6 +1973,11 @@
del_domain_from_list(&dom->domain);
+ if (timer_pending(&dom->flush_timer))
+ del_timer(&dom->flush_timer);
+
+ dma_ops_domain_free_flush_queue(dom);
+
put_iova_domain(&dom->iovad);
free_pagetable(&dom->domain);
@@ -1784,6 +2016,14 @@
/* Initialize reserved ranges */
copy_reserved_iova(&reserved_iova_ranges, &dma_dom->iovad);
+ if (dma_ops_domain_alloc_flush_queue(dma_dom))
+ goto free_dma_dom;
+
+ setup_timer(&dma_dom->flush_timer, queue_flush_timeout,
+ (unsigned long)dma_dom);
+
+ atomic_set(&dma_dom->flush_timer_on, 0);
+
add_domain_to_list(&dma_dom->domain);
return dma_dom;
@@ -1846,7 +2086,8 @@
flags |= tmp;
}
- flags &= ~(0xffffUL);
+
+ flags &= ~(DTE_FLAG_SA | 0xffffULL);
flags |= domain->id;
amd_iommu_dev_table[devid].data[1] = flags;
@@ -2227,92 +2468,6 @@
*
*****************************************************************************/
-static void __queue_flush(struct flush_queue *queue)
-{
- struct protection_domain *domain;
- unsigned long flags;
- int idx;
-
- /* First flush TLB of all known domains */
- spin_lock_irqsave(&amd_iommu_pd_lock, flags);
- list_for_each_entry(domain, &amd_iommu_pd_list, list)
- domain_flush_tlb(domain);
- spin_unlock_irqrestore(&amd_iommu_pd_lock, flags);
-
- /* Wait until flushes have completed */
- domain_flush_complete(NULL);
-
- for (idx = 0; idx < queue->next; ++idx) {
- struct flush_queue_entry *entry;
-
- entry = queue->entries + idx;
-
- free_iova_fast(&entry->dma_dom->iovad,
- entry->iova_pfn,
- entry->pages);
-
- /* Not really necessary, just to make sure we catch any bugs */
- entry->dma_dom = NULL;
- }
-
- queue->next = 0;
-}
-
-static void queue_flush_all(void)
-{
- int cpu;
-
- for_each_possible_cpu(cpu) {
- struct flush_queue *queue;
- unsigned long flags;
-
- queue = per_cpu_ptr(&flush_queue, cpu);
- spin_lock_irqsave(&queue->lock, flags);
- if (queue->next > 0)
- __queue_flush(queue);
- spin_unlock_irqrestore(&queue->lock, flags);
- }
-}
-
-static void queue_flush_timeout(unsigned long unsused)
-{
- atomic_set(&queue_timer_on, 0);
- queue_flush_all();
-}
-
-static void queue_add(struct dma_ops_domain *dma_dom,
- unsigned long address, unsigned long pages)
-{
- struct flush_queue_entry *entry;
- struct flush_queue *queue;
- unsigned long flags;
- int idx;
-
- pages = __roundup_pow_of_two(pages);
- address >>= PAGE_SHIFT;
-
- queue = get_cpu_ptr(&flush_queue);
- spin_lock_irqsave(&queue->lock, flags);
-
- if (queue->next == FLUSH_QUEUE_SIZE)
- __queue_flush(queue);
-
- idx = queue->next++;
- entry = queue->entries + idx;
-
- entry->iova_pfn = address;
- entry->pages = pages;
- entry->dma_dom = dma_dom;
-
- spin_unlock_irqrestore(&queue->lock, flags);
-
- if (atomic_cmpxchg(&queue_timer_on, 0, 1) == 0)
- mod_timer(&queue_timer, jiffies + msecs_to_jiffies(10));
-
- put_cpu_ptr(&flush_queue);
-}
-
-
/*
* In the dma_ops path we only have the struct device. This function
* finds the corresponding IOMMU, the protection domain and the
@@ -2807,7 +2962,7 @@
int __init amd_iommu_init_api(void)
{
- int ret, cpu, err = 0;
+ int ret, err = 0;
ret = iova_cache_get();
if (ret)
@@ -2817,18 +2972,6 @@
if (ret)
return ret;
- for_each_possible_cpu(cpu) {
- struct flush_queue *queue = per_cpu_ptr(&flush_queue, cpu);
-
- queue->entries = kzalloc(FLUSH_QUEUE_SIZE *
- sizeof(*queue->entries),
- GFP_KERNEL);
- if (!queue->entries)
- goto out_put_iova;
-
- spin_lock_init(&queue->lock);
- }
-
err = bus_set_iommu(&pci_bus_type, &amd_iommu_ops);
if (err)
return err;
@@ -2840,23 +2983,12 @@
err = bus_set_iommu(&platform_bus_type, &amd_iommu_ops);
if (err)
return err;
+
return 0;
-
-out_put_iova:
- for_each_possible_cpu(cpu) {
- struct flush_queue *queue = per_cpu_ptr(&flush_queue, cpu);
-
- kfree(queue->entries);
- }
-
- return -ENOMEM;
}
int __init amd_iommu_init_dma_ops(void)
{
- setup_timer(&queue_timer, queue_flush_timeout, 0);
- atomic_set(&queue_timer_on, 0);
-
swiotlb = iommu_pass_through ? 1 : 0;
iommu_detected = 1;
@@ -3012,12 +3144,6 @@
switch (dom->type) {
case IOMMU_DOMAIN_DMA:
- /*
- * First make sure the domain is no longer referenced from the
- * flush queue
- */
- queue_flush_all();
-
/* Now release the domain */
dma_dom = to_dma_ops_domain(domain);
dma_ops_domain_free(dma_dom);
@@ -4281,7 +4407,7 @@
irte_info->index);
}
-static struct irq_domain_ops amd_ir_domain_ops = {
+static const struct irq_domain_ops amd_ir_domain_ops = {
.alloc = irq_remapping_alloc,
.free = irq_remapping_free,
.activate = irq_remapping_activate,
@@ -4326,6 +4452,7 @@
/* Setting */
irte->hi.fields.ga_root_ptr = (pi_data->base >> 12);
irte->hi.fields.vector = vcpu_pi_info->vector;
+ irte->lo.fields_vapic.ga_log_intr = 1;
irte->lo.fields_vapic.guest_mode = 1;
irte->lo.fields_vapic.ga_tag = pi_data->ga_tag;
diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c
index 5a11328..3723037 100644
--- a/drivers/iommu/amd_iommu_init.c
+++ b/drivers/iommu/amd_iommu_init.c
@@ -29,6 +29,7 @@
#include <linux/export.h>
#include <linux/iommu.h>
#include <linux/kmemleak.h>
+#include <linux/crash_dump.h>
#include <asm/pci-direct.h>
#include <asm/iommu.h>
#include <asm/gart.h>
@@ -236,6 +237,7 @@
IOMMU_INITIALIZED,
IOMMU_NOT_FOUND,
IOMMU_INIT_ERROR,
+ IOMMU_CMDLINE_DISABLED,
};
/* Early ioapic and hpet maps from kernel command line */
@@ -588,6 +590,8 @@
writel(0x00, iommu->mmio_base + MMIO_CMD_HEAD_OFFSET);
writel(0x00, iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
+ iommu->cmd_buf_head = 0;
+ iommu->cmd_buf_tail = 0;
iommu_feature_enable(iommu, CONTROL_CMDBUF_EN);
}
@@ -1898,6 +1902,14 @@
for (devid = 0; devid <= amd_iommu_last_bdf; ++devid) {
set_dev_entry_bit(devid, DEV_ENTRY_VALID);
set_dev_entry_bit(devid, DEV_ENTRY_TRANSLATION);
+ /*
+ * In kdump kernels in-flight DMA from the old kernel might
+ * cause IO_PAGE_FAULTs. There are no reports that a kdump
+ * actually failed because of that, so just disable fault
+ * reporting in the hardware to get rid of the messages
+ */
+ if (is_kdump_kernel())
+ set_dev_entry_bit(devid, DEV_ENTRY_NO_PAGE_FAULT);
}
}
@@ -2097,23 +2109,27 @@
.resume = amd_iommu_resume,
};
-static void __init free_on_init_error(void)
+static void __init free_iommu_resources(void)
{
kmemleak_free(irq_lookup_table);
free_pages((unsigned long)irq_lookup_table,
get_order(rlookup_table_size));
+ irq_lookup_table = NULL;
kmem_cache_destroy(amd_iommu_irq_cache);
amd_iommu_irq_cache = NULL;
free_pages((unsigned long)amd_iommu_rlookup_table,
get_order(rlookup_table_size));
+ amd_iommu_rlookup_table = NULL;
free_pages((unsigned long)amd_iommu_alias_table,
get_order(alias_table_size));
+ amd_iommu_alias_table = NULL;
free_pages((unsigned long)amd_iommu_dev_table,
get_order(dev_table_size));
+ amd_iommu_dev_table = NULL;
free_iommu_all();
@@ -2183,6 +2199,7 @@
{
free_pages((unsigned long)amd_iommu_pd_alloc_bitmap,
get_order(MAX_DOMAIN_ID/8));
+ amd_iommu_pd_alloc_bitmap = NULL;
free_unity_maps();
}
@@ -2307,6 +2324,9 @@
if (ret)
goto out;
+ /* Disable any previously enabled IOMMUs */
+ disable_iommus();
+
if (amd_iommu_irq_remap)
amd_iommu_irq_remap = check_ioapic_information();
@@ -2410,14 +2430,21 @@
case IOMMU_IVRS_DETECTED:
ret = early_amd_iommu_init();
init_state = ret ? IOMMU_INIT_ERROR : IOMMU_ACPI_FINISHED;
+ if (init_state == IOMMU_ACPI_FINISHED && amd_iommu_disabled) {
+ pr_info("AMD-Vi: AMD IOMMU disabled on kernel command-line\n");
+ free_dma_resources();
+ free_iommu_resources();
+ init_state = IOMMU_CMDLINE_DISABLED;
+ ret = -EINVAL;
+ }
break;
case IOMMU_ACPI_FINISHED:
early_enable_iommus();
- register_syscore_ops(&amd_iommu_syscore_ops);
x86_platform.iommu_shutdown = disable_iommus;
init_state = IOMMU_ENABLED;
break;
case IOMMU_ENABLED:
+ register_syscore_ops(&amd_iommu_syscore_ops);
ret = amd_iommu_init_pci();
init_state = ret ? IOMMU_INIT_ERROR : IOMMU_PCI_INIT;
enable_iommus_v2();
@@ -2438,6 +2465,7 @@
break;
case IOMMU_NOT_FOUND:
case IOMMU_INIT_ERROR:
+ case IOMMU_CMDLINE_DISABLED:
/* Error states => do nothing */
ret = -EINVAL;
break;
@@ -2451,13 +2479,14 @@
static int __init iommu_go_to_state(enum iommu_init_state state)
{
- int ret = 0;
+ int ret = -EINVAL;
while (init_state != state) {
- ret = state_next();
- if (init_state == IOMMU_NOT_FOUND ||
- init_state == IOMMU_INIT_ERROR)
+ if (init_state == IOMMU_NOT_FOUND ||
+ init_state == IOMMU_INIT_ERROR ||
+ init_state == IOMMU_CMDLINE_DISABLED)
break;
+ ret = state_next();
}
return ret;
@@ -2522,7 +2551,7 @@
free_dma_resources();
if (!irq_remapping_enabled) {
disable_iommus();
- free_on_init_error();
+ free_iommu_resources();
} else {
struct amd_iommu *iommu;
@@ -2549,9 +2578,6 @@
if (no_iommu || (iommu_detected && !gart_iommu_aperture))
return -ENODEV;
- if (amd_iommu_disabled)
- return -ENODEV;
-
ret = iommu_go_to_state(IOMMU_IVRS_DETECTED);
if (ret)
return ret;
diff --git a/drivers/iommu/amd_iommu_types.h b/drivers/iommu/amd_iommu_types.h
index 4de8f41..294a409 100644
--- a/drivers/iommu/amd_iommu_types.h
+++ b/drivers/iommu/amd_iommu_types.h
@@ -322,6 +322,7 @@
#define IOMMU_PTE_IW (1ULL << 62)
#define DTE_FLAG_IOTLB (1ULL << 32)
+#define DTE_FLAG_SA (1ULL << 34)
#define DTE_FLAG_GV (1ULL << 55)
#define DTE_FLAG_MASK (0x3ffULL << 32)
#define DTE_GLX_SHIFT (56)
@@ -516,6 +517,8 @@
/* command buffer virtual address */
u8 *cmd_buf;
+ u32 cmd_buf_head;
+ u32 cmd_buf_tail;
/* event buffer virtual address */
u8 *evt_buf;
diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
index 380969a..568c400 100644
--- a/drivers/iommu/arm-smmu-v3.c
+++ b/drivers/iommu/arm-smmu-v3.c
@@ -408,10 +408,20 @@
/* High-level queue structures */
#define ARM_SMMU_POLL_TIMEOUT_US 100
+#define ARM_SMMU_CMDQ_DRAIN_TIMEOUT_US 1000000 /* 1s! */
#define MSI_IOVA_BASE 0x8000000
#define MSI_IOVA_LENGTH 0x100000
+/* Until ACPICA headers cover IORT rev. C */
+#ifndef ACPI_IORT_SMMU_HISILICON_HI161X
+#define ACPI_IORT_SMMU_HISILICON_HI161X 0x1
+#endif
+
+#ifndef ACPI_IORT_SMMU_V3_CAVIUM_CN99XX
+#define ACPI_IORT_SMMU_V3_CAVIUM_CN99XX 0x2
+#endif
+
static bool disable_bypass;
module_param_named(disable_bypass, disable_bypass, bool, S_IRUGO);
MODULE_PARM_DESC(disable_bypass,
@@ -597,6 +607,7 @@
u32 features;
#define ARM_SMMU_OPT_SKIP_PREFETCH (1 << 0)
+#define ARM_SMMU_OPT_PAGE0_REGS_ONLY (1 << 1)
u32 options;
struct arm_smmu_cmdq cmdq;
@@ -604,6 +615,7 @@
struct arm_smmu_priq priq;
int gerr_irq;
+ int combined_irq;
unsigned long ias; /* IPA */
unsigned long oas; /* PA */
@@ -645,7 +657,6 @@
struct mutex init_mutex; /* Protects smmu pointer */
struct io_pgtable_ops *pgtbl_ops;
- spinlock_t pgtbl_lock;
enum arm_smmu_domain_stage stage;
union {
@@ -663,9 +674,20 @@
static struct arm_smmu_option_prop arm_smmu_options[] = {
{ ARM_SMMU_OPT_SKIP_PREFETCH, "hisilicon,broken-prefetch-cmd" },
+ { ARM_SMMU_OPT_PAGE0_REGS_ONLY, "cavium,cn9900-broken-page1-regspace"},
{ 0, NULL},
};
+static inline void __iomem *arm_smmu_page1_fixup(unsigned long offset,
+ struct arm_smmu_device *smmu)
+{
+ if ((offset > SZ_64K) &&
+ (smmu->options & ARM_SMMU_OPT_PAGE0_REGS_ONLY))
+ offset -= SZ_64K;
+
+ return smmu->base + offset;
+}
+
static struct arm_smmu_domain *to_smmu_domain(struct iommu_domain *dom)
{
return container_of(dom, struct arm_smmu_domain, domain);
@@ -737,7 +759,13 @@
*/
static int queue_poll_cons(struct arm_smmu_queue *q, bool drain, bool wfe)
{
- ktime_t timeout = ktime_add_us(ktime_get(), ARM_SMMU_POLL_TIMEOUT_US);
+ ktime_t timeout;
+ unsigned int delay = 1;
+
+ /* Wait longer if it's queue drain */
+ timeout = ktime_add_us(ktime_get(), drain ?
+ ARM_SMMU_CMDQ_DRAIN_TIMEOUT_US :
+ ARM_SMMU_POLL_TIMEOUT_US);
while (queue_sync_cons(q), (drain ? !queue_empty(q) : queue_full(q))) {
if (ktime_compare(ktime_get(), timeout) > 0)
@@ -747,7 +775,8 @@
wfe();
} else {
cpu_relax();
- udelay(1);
+ udelay(delay);
+ delay *= 2;
}
}
@@ -1302,6 +1331,24 @@
return IRQ_HANDLED;
}
+static irqreturn_t arm_smmu_combined_irq_thread(int irq, void *dev)
+{
+ struct arm_smmu_device *smmu = dev;
+
+ arm_smmu_evtq_thread(irq, dev);
+ if (smmu->features & ARM_SMMU_FEAT_PRI)
+ arm_smmu_priq_thread(irq, dev);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t arm_smmu_combined_irq_handler(int irq, void *dev)
+{
+ arm_smmu_gerror_handler(irq, dev);
+ arm_smmu_cmdq_sync_handler(irq, dev);
+ return IRQ_WAKE_THREAD;
+}
+
/* IO_PGTABLE API */
static void __arm_smmu_tlb_sync(struct arm_smmu_device *smmu)
{
@@ -1406,7 +1453,6 @@
}
mutex_init(&smmu_domain->init_mutex);
- spin_lock_init(&smmu_domain->pgtbl_lock);
return &smmu_domain->domain;
}
@@ -1555,6 +1601,9 @@
.iommu_dev = smmu->dev,
};
+ if (smmu->features & ARM_SMMU_FEAT_COHERENCY)
+ pgtbl_cfg.quirks = IO_PGTABLE_QUIRK_NO_DMA;
+
pgtbl_ops = alloc_io_pgtable_ops(fmt, &pgtbl_cfg, smmu_domain);
if (!pgtbl_ops)
return -ENOMEM;
@@ -1675,44 +1724,29 @@
static int arm_smmu_map(struct iommu_domain *domain, unsigned long iova,
phys_addr_t paddr, size_t size, int prot)
{
- int ret;
- unsigned long flags;
- struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
- struct io_pgtable_ops *ops = smmu_domain->pgtbl_ops;
+ struct io_pgtable_ops *ops = to_smmu_domain(domain)->pgtbl_ops;
if (!ops)
return -ENODEV;
- spin_lock_irqsave(&smmu_domain->pgtbl_lock, flags);
- ret = ops->map(ops, iova, paddr, size, prot);
- spin_unlock_irqrestore(&smmu_domain->pgtbl_lock, flags);
- return ret;
+ return ops->map(ops, iova, paddr, size, prot);
}
static size_t
arm_smmu_unmap(struct iommu_domain *domain, unsigned long iova, size_t size)
{
- size_t ret;
- unsigned long flags;
- struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
- struct io_pgtable_ops *ops = smmu_domain->pgtbl_ops;
+ struct io_pgtable_ops *ops = to_smmu_domain(domain)->pgtbl_ops;
if (!ops)
return 0;
- spin_lock_irqsave(&smmu_domain->pgtbl_lock, flags);
- ret = ops->unmap(ops, iova, size);
- spin_unlock_irqrestore(&smmu_domain->pgtbl_lock, flags);
- return ret;
+ return ops->unmap(ops, iova, size);
}
static phys_addr_t
arm_smmu_iova_to_phys(struct iommu_domain *domain, dma_addr_t iova)
{
- phys_addr_t ret;
- unsigned long flags;
- struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
- struct io_pgtable_ops *ops = smmu_domain->pgtbl_ops;
+ struct io_pgtable_ops *ops = to_smmu_domain(domain)->pgtbl_ops;
if (domain->type == IOMMU_DOMAIN_IDENTITY)
return iova;
@@ -1720,11 +1754,7 @@
if (!ops)
return 0;
- spin_lock_irqsave(&smmu_domain->pgtbl_lock, flags);
- ret = ops->iova_to_phys(ops, iova);
- spin_unlock_irqrestore(&smmu_domain->pgtbl_lock, flags);
-
- return ret;
+ return ops->iova_to_phys(ops, iova);
}
static struct platform_driver arm_smmu_driver;
@@ -1961,8 +1991,8 @@
return -ENOMEM;
}
- q->prod_reg = smmu->base + prod_off;
- q->cons_reg = smmu->base + cons_off;
+ q->prod_reg = arm_smmu_page1_fixup(prod_off, smmu);
+ q->cons_reg = arm_smmu_page1_fixup(cons_off, smmu);
q->ent_dwords = dwords;
q->q_base = Q_BASE_RWA;
@@ -2218,18 +2248,9 @@
devm_add_action(dev, arm_smmu_free_msis, dev);
}
-static int arm_smmu_setup_irqs(struct arm_smmu_device *smmu)
+static void arm_smmu_setup_unique_irqs(struct arm_smmu_device *smmu)
{
- int ret, irq;
- u32 irqen_flags = IRQ_CTRL_EVTQ_IRQEN | IRQ_CTRL_GERROR_IRQEN;
-
- /* Disable IRQs first */
- ret = arm_smmu_write_reg_sync(smmu, 0, ARM_SMMU_IRQ_CTRL,
- ARM_SMMU_IRQ_CTRLACK);
- if (ret) {
- dev_err(smmu->dev, "failed to disable irqs\n");
- return ret;
- }
+ int irq, ret;
arm_smmu_setup_msis(smmu);
@@ -2272,10 +2293,41 @@
if (ret < 0)
dev_warn(smmu->dev,
"failed to enable priq irq\n");
- else
- irqen_flags |= IRQ_CTRL_PRIQ_IRQEN;
}
}
+}
+
+static int arm_smmu_setup_irqs(struct arm_smmu_device *smmu)
+{
+ int ret, irq;
+ u32 irqen_flags = IRQ_CTRL_EVTQ_IRQEN | IRQ_CTRL_GERROR_IRQEN;
+
+ /* Disable IRQs first */
+ ret = arm_smmu_write_reg_sync(smmu, 0, ARM_SMMU_IRQ_CTRL,
+ ARM_SMMU_IRQ_CTRLACK);
+ if (ret) {
+ dev_err(smmu->dev, "failed to disable irqs\n");
+ return ret;
+ }
+
+ irq = smmu->combined_irq;
+ if (irq) {
+ /*
+ * Cavium ThunderX2 implementation doesn't not support unique
+ * irq lines. Use single irq line for all the SMMUv3 interrupts.
+ */
+ ret = devm_request_threaded_irq(smmu->dev, irq,
+ arm_smmu_combined_irq_handler,
+ arm_smmu_combined_irq_thread,
+ IRQF_ONESHOT,
+ "arm-smmu-v3-combined-irq", smmu);
+ if (ret < 0)
+ dev_warn(smmu->dev, "failed to enable combined irq\n");
+ } else
+ arm_smmu_setup_unique_irqs(smmu);
+
+ if (smmu->features & ARM_SMMU_FEAT_PRI)
+ irqen_flags |= IRQ_CTRL_PRIQ_IRQEN;
/* Enable interrupt generation on the SMMU */
ret = arm_smmu_write_reg_sync(smmu, irqen_flags,
@@ -2363,8 +2415,10 @@
/* Event queue */
writeq_relaxed(smmu->evtq.q.q_base, smmu->base + ARM_SMMU_EVTQ_BASE);
- writel_relaxed(smmu->evtq.q.prod, smmu->base + ARM_SMMU_EVTQ_PROD);
- writel_relaxed(smmu->evtq.q.cons, smmu->base + ARM_SMMU_EVTQ_CONS);
+ writel_relaxed(smmu->evtq.q.prod,
+ arm_smmu_page1_fixup(ARM_SMMU_EVTQ_PROD, smmu));
+ writel_relaxed(smmu->evtq.q.cons,
+ arm_smmu_page1_fixup(ARM_SMMU_EVTQ_CONS, smmu));
enables |= CR0_EVTQEN;
ret = arm_smmu_write_reg_sync(smmu, enables, ARM_SMMU_CR0,
@@ -2379,9 +2433,9 @@
writeq_relaxed(smmu->priq.q.q_base,
smmu->base + ARM_SMMU_PRIQ_BASE);
writel_relaxed(smmu->priq.q.prod,
- smmu->base + ARM_SMMU_PRIQ_PROD);
+ arm_smmu_page1_fixup(ARM_SMMU_PRIQ_PROD, smmu));
writel_relaxed(smmu->priq.q.cons,
- smmu->base + ARM_SMMU_PRIQ_CONS);
+ arm_smmu_page1_fixup(ARM_SMMU_PRIQ_CONS, smmu));
enables |= CR0_PRIQEN;
ret = arm_smmu_write_reg_sync(smmu, enables, ARM_SMMU_CR0,
@@ -2605,6 +2659,20 @@
}
#ifdef CONFIG_ACPI
+static void acpi_smmu_get_options(u32 model, struct arm_smmu_device *smmu)
+{
+ switch (model) {
+ case ACPI_IORT_SMMU_V3_CAVIUM_CN99XX:
+ smmu->options |= ARM_SMMU_OPT_PAGE0_REGS_ONLY;
+ break;
+ case ACPI_IORT_SMMU_HISILICON_HI161X:
+ smmu->options |= ARM_SMMU_OPT_SKIP_PREFETCH;
+ break;
+ }
+
+ dev_notice(smmu->dev, "option mask 0x%x\n", smmu->options);
+}
+
static int arm_smmu_device_acpi_probe(struct platform_device *pdev,
struct arm_smmu_device *smmu)
{
@@ -2617,6 +2685,8 @@
/* Retrieve SMMUv3 specific data */
iort_smmu = (struct acpi_iort_smmu_v3 *)node->node_data;
+ acpi_smmu_get_options(iort_smmu->model, smmu);
+
if (iort_smmu->flags & ACPI_IORT_SMMU_V3_COHACC_OVERRIDE)
smmu->features |= ARM_SMMU_FEAT_COHERENCY;
@@ -2652,6 +2722,14 @@
return ret;
}
+static unsigned long arm_smmu_resource_size(struct arm_smmu_device *smmu)
+{
+ if (smmu->options & ARM_SMMU_OPT_PAGE0_REGS_ONLY)
+ return SZ_64K;
+ else
+ return SZ_128K;
+}
+
static int arm_smmu_device_probe(struct platform_device *pdev)
{
int irq, ret;
@@ -2668,35 +2746,6 @@
}
smmu->dev = dev;
- /* Base address */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (resource_size(res) + 1 < SZ_128K) {
- dev_err(dev, "MMIO region too small (%pr)\n", res);
- return -EINVAL;
- }
- ioaddr = res->start;
-
- smmu->base = devm_ioremap_resource(dev, res);
- if (IS_ERR(smmu->base))
- return PTR_ERR(smmu->base);
-
- /* Interrupt lines */
- irq = platform_get_irq_byname(pdev, "eventq");
- if (irq > 0)
- smmu->evtq.q.irq = irq;
-
- irq = platform_get_irq_byname(pdev, "priq");
- if (irq > 0)
- smmu->priq.q.irq = irq;
-
- irq = platform_get_irq_byname(pdev, "cmdq-sync");
- if (irq > 0)
- smmu->cmdq.q.irq = irq;
-
- irq = platform_get_irq_byname(pdev, "gerror");
- if (irq > 0)
- smmu->gerr_irq = irq;
-
if (dev->of_node) {
ret = arm_smmu_device_dt_probe(pdev, smmu);
} else {
@@ -2708,6 +2757,40 @@
/* Set bypass mode according to firmware probing result */
bypass = !!ret;
+ /* Base address */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (resource_size(res) + 1 < arm_smmu_resource_size(smmu)) {
+ dev_err(dev, "MMIO region too small (%pr)\n", res);
+ return -EINVAL;
+ }
+ ioaddr = res->start;
+
+ smmu->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(smmu->base))
+ return PTR_ERR(smmu->base);
+
+ /* Interrupt lines */
+
+ irq = platform_get_irq_byname(pdev, "combined");
+ if (irq > 0)
+ smmu->combined_irq = irq;
+ else {
+ irq = platform_get_irq_byname(pdev, "eventq");
+ if (irq > 0)
+ smmu->evtq.q.irq = irq;
+
+ irq = platform_get_irq_byname(pdev, "priq");
+ if (irq > 0)
+ smmu->priq.q.irq = irq;
+
+ irq = platform_get_irq_byname(pdev, "cmdq-sync");
+ if (irq > 0)
+ smmu->cmdq.q.irq = irq;
+
+ irq = platform_get_irq_byname(pdev, "gerror");
+ if (irq > 0)
+ smmu->gerr_irq = irq;
+ }
/* Probe the h/w */
ret = arm_smmu_device_hw_probe(smmu);
if (ret)
@@ -2736,6 +2819,10 @@
iommu_device_set_fwnode(&smmu->iommu, dev->fwnode);
ret = iommu_device_register(&smmu->iommu);
+ if (ret) {
+ dev_err(dev, "Failed to register iommu\n");
+ return ret;
+ }
#ifdef CONFIG_PCI
if (pci_bus_type.iommu_ops != &arm_smmu_ops) {
@@ -2768,7 +2855,7 @@
return 0;
}
-static struct of_device_id arm_smmu_of_match[] = {
+static const struct of_device_id arm_smmu_of_match[] = {
{ .compatible = "arm,smmu-v3", },
{ },
};
diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
index 7ec30b0..b97188a 100644
--- a/drivers/iommu/arm-smmu.c
+++ b/drivers/iommu/arm-smmu.c
@@ -312,6 +312,14 @@
CAVIUM_SMMUV2,
};
+/* Until ACPICA headers cover IORT rev. C */
+#ifndef ACPI_IORT_SMMU_CORELINK_MMU401
+#define ACPI_IORT_SMMU_CORELINK_MMU401 0x4
+#endif
+#ifndef ACPI_IORT_SMMU_CAVIUM_THUNDERX
+#define ACPI_IORT_SMMU_CAVIUM_THUNDERX 0x5
+#endif
+
struct arm_smmu_s2cr {
struct iommu_group *group;
int count;
@@ -392,6 +400,8 @@
u32 cavium_id_base; /* Specific to Cavium */
+ spinlock_t global_sync_lock;
+
/* IOMMU core code handle */
struct iommu_device iommu;
};
@@ -425,10 +435,10 @@
struct arm_smmu_domain {
struct arm_smmu_device *smmu;
struct io_pgtable_ops *pgtbl_ops;
- spinlock_t pgtbl_lock;
struct arm_smmu_cfg cfg;
enum arm_smmu_domain_stage stage;
struct mutex init_mutex; /* Protects smmu pointer */
+ spinlock_t cb_lock; /* Serialises ATS1* ops and TLB syncs */
struct iommu_domain domain;
};
@@ -594,9 +604,12 @@
static void arm_smmu_tlb_sync_global(struct arm_smmu_device *smmu)
{
void __iomem *base = ARM_SMMU_GR0(smmu);
+ unsigned long flags;
+ spin_lock_irqsave(&smmu->global_sync_lock, flags);
__arm_smmu_tlb_sync(smmu, base + ARM_SMMU_GR0_sTLBGSYNC,
base + ARM_SMMU_GR0_sTLBGSTATUS);
+ spin_unlock_irqrestore(&smmu->global_sync_lock, flags);
}
static void arm_smmu_tlb_sync_context(void *cookie)
@@ -604,9 +617,12 @@
struct arm_smmu_domain *smmu_domain = cookie;
struct arm_smmu_device *smmu = smmu_domain->smmu;
void __iomem *base = ARM_SMMU_CB(smmu, smmu_domain->cfg.cbndx);
+ unsigned long flags;
+ spin_lock_irqsave(&smmu_domain->cb_lock, flags);
__arm_smmu_tlb_sync(smmu, base + ARM_SMMU_CB_TLBSYNC,
base + ARM_SMMU_CB_TLBSTATUS);
+ spin_unlock_irqrestore(&smmu_domain->cb_lock, flags);
}
static void arm_smmu_tlb_sync_vmid(void *cookie)
@@ -1010,6 +1026,9 @@
.iommu_dev = smmu->dev,
};
+ if (smmu->features & ARM_SMMU_FEAT_COHERENT_WALK)
+ pgtbl_cfg.quirks = IO_PGTABLE_QUIRK_NO_DMA;
+
smmu_domain->smmu = smmu;
pgtbl_ops = alloc_io_pgtable_ops(fmt, &pgtbl_cfg, smmu_domain);
if (!pgtbl_ops) {
@@ -1102,7 +1121,7 @@
}
mutex_init(&smmu_domain->init_mutex);
- spin_lock_init(&smmu_domain->pgtbl_lock);
+ spin_lock_init(&smmu_domain->cb_lock);
return &smmu_domain->domain;
}
@@ -1380,35 +1399,23 @@
static int arm_smmu_map(struct iommu_domain *domain, unsigned long iova,
phys_addr_t paddr, size_t size, int prot)
{
- int ret;
- unsigned long flags;
- struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
- struct io_pgtable_ops *ops= smmu_domain->pgtbl_ops;
+ struct io_pgtable_ops *ops = to_smmu_domain(domain)->pgtbl_ops;
if (!ops)
return -ENODEV;
- spin_lock_irqsave(&smmu_domain->pgtbl_lock, flags);
- ret = ops->map(ops, iova, paddr, size, prot);
- spin_unlock_irqrestore(&smmu_domain->pgtbl_lock, flags);
- return ret;
+ return ops->map(ops, iova, paddr, size, prot);
}
static size_t arm_smmu_unmap(struct iommu_domain *domain, unsigned long iova,
size_t size)
{
- size_t ret;
- unsigned long flags;
- struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
- struct io_pgtable_ops *ops= smmu_domain->pgtbl_ops;
+ struct io_pgtable_ops *ops = to_smmu_domain(domain)->pgtbl_ops;
if (!ops)
return 0;
- spin_lock_irqsave(&smmu_domain->pgtbl_lock, flags);
- ret = ops->unmap(ops, iova, size);
- spin_unlock_irqrestore(&smmu_domain->pgtbl_lock, flags);
- return ret;
+ return ops->unmap(ops, iova, size);
}
static phys_addr_t arm_smmu_iova_to_phys_hard(struct iommu_domain *domain,
@@ -1422,10 +1429,11 @@
void __iomem *cb_base;
u32 tmp;
u64 phys;
- unsigned long va;
+ unsigned long va, flags;
cb_base = ARM_SMMU_CB(smmu, cfg->cbndx);
+ spin_lock_irqsave(&smmu_domain->cb_lock, flags);
/* ATS1 registers can only be written atomically */
va = iova & ~0xfffUL;
if (smmu->version == ARM_SMMU_V2)
@@ -1435,6 +1443,7 @@
if (readl_poll_timeout_atomic(cb_base + ARM_SMMU_CB_ATSR, tmp,
!(tmp & ATSR_ACTIVE), 5, 50)) {
+ spin_unlock_irqrestore(&smmu_domain->cb_lock, flags);
dev_err(dev,
"iova to phys timed out on %pad. Falling back to software table walk.\n",
&iova);
@@ -1442,6 +1451,7 @@
}
phys = readq_relaxed(cb_base + ARM_SMMU_CB_PAR);
+ spin_unlock_irqrestore(&smmu_domain->cb_lock, flags);
if (phys & CB_PAR_F) {
dev_err(dev, "translation fault!\n");
dev_err(dev, "PAR = 0x%llx\n", phys);
@@ -1454,10 +1464,8 @@
static phys_addr_t arm_smmu_iova_to_phys(struct iommu_domain *domain,
dma_addr_t iova)
{
- phys_addr_t ret;
- unsigned long flags;
struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
- struct io_pgtable_ops *ops= smmu_domain->pgtbl_ops;
+ struct io_pgtable_ops *ops = smmu_domain->pgtbl_ops;
if (domain->type == IOMMU_DOMAIN_IDENTITY)
return iova;
@@ -1465,17 +1473,11 @@
if (!ops)
return 0;
- spin_lock_irqsave(&smmu_domain->pgtbl_lock, flags);
if (smmu_domain->smmu->features & ARM_SMMU_FEAT_TRANS_OPS &&
- smmu_domain->stage == ARM_SMMU_DOMAIN_S1) {
- ret = arm_smmu_iova_to_phys_hard(domain, iova);
- } else {
- ret = ops->iova_to_phys(ops, iova);
- }
+ smmu_domain->stage == ARM_SMMU_DOMAIN_S1)
+ return arm_smmu_iova_to_phys_hard(domain, iova);
- spin_unlock_irqrestore(&smmu_domain->pgtbl_lock, flags);
-
- return ret;
+ return ops->iova_to_phys(ops, iova);
}
static bool arm_smmu_capable(enum iommu_cap cap)
@@ -1517,7 +1519,6 @@
if (using_legacy_binding) {
ret = arm_smmu_register_legacy_master(dev, &smmu);
- fwspec = dev->iommu_fwspec;
if (ret)
goto out_free;
} else if (fwspec && fwspec->ops == &arm_smmu_ops) {
@@ -1556,15 +1557,15 @@
ret = arm_smmu_master_alloc_smes(dev);
if (ret)
- goto out_free;
+ goto out_cfg_free;
iommu_device_link(&smmu->iommu, dev);
return 0;
+out_cfg_free:
+ kfree(cfg);
out_free:
- if (fwspec)
- kfree(fwspec->iommu_priv);
iommu_fwspec_free(dev);
return ret;
}
@@ -1931,6 +1932,7 @@
smmu->num_mapping_groups = size;
mutex_init(&smmu->stream_map_mutex);
+ spin_lock_init(&smmu->global_sync_lock);
if (smmu->version < ARM_SMMU_V2 || !(id & ID0_PTFS_NO_AARCH32)) {
smmu->features |= ARM_SMMU_FEAT_FMT_AARCH32_L;
@@ -2073,6 +2075,10 @@
smmu->version = ARM_SMMU_V1;
smmu->model = GENERIC_SMMU;
break;
+ case ACPI_IORT_SMMU_CORELINK_MMU401:
+ smmu->version = ARM_SMMU_V1_64K;
+ smmu->model = GENERIC_SMMU;
+ break;
case ACPI_IORT_SMMU_V2:
smmu->version = ARM_SMMU_V2;
smmu->model = GENERIC_SMMU;
@@ -2081,6 +2087,10 @@
smmu->version = ARM_SMMU_V2;
smmu->model = ARM_MMU500;
break;
+ case ACPI_IORT_SMMU_CAVIUM_THUNDERX:
+ smmu->version = ARM_SMMU_V2;
+ smmu->model = CAVIUM_SMMUV2;
+ break;
default:
ret = -ENODEV;
}
diff --git a/drivers/iommu/dma-iommu.c b/drivers/iommu/dma-iommu.c
index 9403336..9d1cebe 100644
--- a/drivers/iommu/dma-iommu.c
+++ b/drivers/iommu/dma-iommu.c
@@ -316,7 +316,7 @@
* If we have devices with different DMA masks, move the free
* area cache limit down for the benefit of the smaller one.
*/
- iovad->dma_32bit_pfn = min(end_pfn, iovad->dma_32bit_pfn);
+ iovad->dma_32bit_pfn = min(end_pfn + 1, iovad->dma_32bit_pfn);
return 0;
}
diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index 1e95475..687f18f 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -481,7 +481,7 @@
struct deferred_flush_table *tables;
};
-DEFINE_PER_CPU(struct deferred_flush_data, deferred_flush);
+static DEFINE_PER_CPU(struct deferred_flush_data, deferred_flush);
/* bitmap for indexing intel_iommus */
static int g_num_of_iommus;
@@ -2390,7 +2390,7 @@
/* No lock here, assumes no domain exit in normal case */
info = dev->archdata.iommu;
- if (info)
+ if (likely(info))
return info->domain;
return NULL;
}
@@ -3478,7 +3478,7 @@
return iova_pfn;
}
-static struct dmar_domain *__get_valid_domain_for_dev(struct device *dev)
+static struct dmar_domain *get_valid_domain_for_dev(struct device *dev)
{
struct dmar_domain *domain, *tmp;
struct dmar_rmrr_unit *rmrr;
@@ -3525,18 +3525,6 @@
return domain;
}
-static inline struct dmar_domain *get_valid_domain_for_dev(struct device *dev)
-{
- struct device_domain_info *info;
-
- /* No lock here, assumes no domain exit in normal case */
- info = dev->archdata.iommu;
- if (likely(info))
- return info->domain;
-
- return __get_valid_domain_for_dev(dev);
-}
-
/* Check if the dev needs to go through non-identity map and unmap process.*/
static int iommu_no_mapping(struct device *dev)
{
@@ -3725,10 +3713,8 @@
struct intel_iommu *iommu;
struct deferred_flush_entry *entry;
struct deferred_flush_data *flush_data;
- unsigned int cpuid;
- cpuid = get_cpu();
- flush_data = per_cpu_ptr(&deferred_flush, cpuid);
+ flush_data = raw_cpu_ptr(&deferred_flush);
/* Flush all CPUs' entries to avoid deferring too much. If
* this becomes a bottleneck, can just flush us, and rely on
@@ -3761,8 +3747,6 @@
}
flush_data->size++;
spin_unlock_irqrestore(&flush_data->lock, flags);
-
- put_cpu();
}
static void intel_unmap(struct device *dev, dma_addr_t dev_addr, size_t size)
@@ -3973,7 +3957,7 @@
return !dma_addr;
}
-struct dma_map_ops intel_dma_ops = {
+const struct dma_map_ops intel_dma_ops = {
.alloc = intel_alloc_coherent,
.free = intel_free_coherent,
.map_sg = intel_map_sg,
diff --git a/drivers/iommu/intel-svm.c b/drivers/iommu/intel-svm.c
index 23c4276..f167c0d 100644
--- a/drivers/iommu/intel-svm.c
+++ b/drivers/iommu/intel-svm.c
@@ -489,6 +489,36 @@
}
EXPORT_SYMBOL_GPL(intel_svm_unbind_mm);
+int intel_svm_is_pasid_valid(struct device *dev, int pasid)
+{
+ struct intel_iommu *iommu;
+ struct intel_svm *svm;
+ int ret = -EINVAL;
+
+ mutex_lock(&pasid_mutex);
+ iommu = intel_svm_device_to_iommu(dev);
+ if (!iommu || !iommu->pasid_table)
+ goto out;
+
+ svm = idr_find(&iommu->pasid_idr, pasid);
+ if (!svm)
+ goto out;
+
+ /* init_mm is used in this case */
+ if (!svm->mm)
+ ret = 1;
+ else if (atomic_read(&svm->mm->mm_users) > 0)
+ ret = 1;
+ else
+ ret = 0;
+
+ out:
+ mutex_unlock(&pasid_mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(intel_svm_is_pasid_valid);
+
/* Page request queue descriptor */
struct page_req_dsc {
u64 srr:1;
diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c
index 8fc641e..a5b89f6 100644
--- a/drivers/iommu/intel_irq_remapping.c
+++ b/drivers/iommu/intel_irq_remapping.c
@@ -76,7 +76,7 @@
* the dmar_global_lock.
*/
static DEFINE_RAW_SPINLOCK(irq_2_ir_lock);
-static struct irq_domain_ops intel_ir_domain_ops;
+static const struct irq_domain_ops intel_ir_domain_ops;
static void iommu_disable_irq_remapping(struct intel_iommu *iommu);
static int __init parse_ioapics_under_ir(void);
@@ -1407,7 +1407,7 @@
modify_irte(&data->irq_2_iommu, &entry);
}
-static struct irq_domain_ops intel_ir_domain_ops = {
+static const struct irq_domain_ops intel_ir_domain_ops = {
.alloc = intel_irq_remapping_alloc,
.free = intel_irq_remapping_free,
.activate = intel_irq_remapping_activate,
diff --git a/drivers/iommu/io-pgtable-arm-v7s.c b/drivers/iommu/io-pgtable-arm-v7s.c
index 8d6ca28..d665d0d 100644
--- a/drivers/iommu/io-pgtable-arm-v7s.c
+++ b/drivers/iommu/io-pgtable-arm-v7s.c
@@ -32,6 +32,7 @@
#define pr_fmt(fmt) "arm-v7s io-pgtable: " fmt
+#include <linux/atomic.h>
#include <linux/dma-mapping.h>
#include <linux/gfp.h>
#include <linux/iommu.h>
@@ -39,6 +40,7 @@
#include <linux/kmemleak.h>
#include <linux/sizes.h>
#include <linux/slab.h>
+#include <linux/spinlock.h>
#include <linux/types.h>
#include <asm/barrier.h>
@@ -92,7 +94,8 @@
#define ARM_V7S_PTE_TYPE_CONT_PAGE 0x1
#define ARM_V7S_PTE_IS_VALID(pte) (((pte) & 0x3) != 0)
-#define ARM_V7S_PTE_IS_TABLE(pte, lvl) (lvl == 1 && ((pte) & ARM_V7S_PTE_TYPE_TABLE))
+#define ARM_V7S_PTE_IS_TABLE(pte, lvl) \
+ ((lvl) == 1 && (((pte) & 0x3) == ARM_V7S_PTE_TYPE_TABLE))
/* Page table bits */
#define ARM_V7S_ATTR_XN(lvl) BIT(4 * (2 - (lvl)))
@@ -167,6 +170,7 @@
arm_v7s_iopte *pgd;
struct kmem_cache *l2_tables;
+ spinlock_t split_lock;
};
static dma_addr_t __arm_v7s_dma_addr(void *pages)
@@ -186,7 +190,8 @@
static void *__arm_v7s_alloc_table(int lvl, gfp_t gfp,
struct arm_v7s_io_pgtable *data)
{
- struct device *dev = data->iop.cfg.iommu_dev;
+ struct io_pgtable_cfg *cfg = &data->iop.cfg;
+ struct device *dev = cfg->iommu_dev;
dma_addr_t dma;
size_t size = ARM_V7S_TABLE_SIZE(lvl);
void *table = NULL;
@@ -195,7 +200,7 @@
table = (void *)__get_dma_pages(__GFP_ZERO, get_order(size));
else if (lvl == 2)
table = kmem_cache_zalloc(data->l2_tables, gfp | GFP_DMA);
- if (table && !selftest_running) {
+ if (table && !(cfg->quirks & IO_PGTABLE_QUIRK_NO_DMA)) {
dma = dma_map_single(dev, table, size, DMA_TO_DEVICE);
if (dma_mapping_error(dev, dma))
goto out_free;
@@ -224,10 +229,11 @@
static void __arm_v7s_free_table(void *table, int lvl,
struct arm_v7s_io_pgtable *data)
{
- struct device *dev = data->iop.cfg.iommu_dev;
+ struct io_pgtable_cfg *cfg = &data->iop.cfg;
+ struct device *dev = cfg->iommu_dev;
size_t size = ARM_V7S_TABLE_SIZE(lvl);
- if (!selftest_running)
+ if (!(cfg->quirks & IO_PGTABLE_QUIRK_NO_DMA))
dma_unmap_single(dev, __arm_v7s_dma_addr(table), size,
DMA_TO_DEVICE);
if (lvl == 1)
@@ -239,7 +245,7 @@
static void __arm_v7s_pte_sync(arm_v7s_iopte *ptep, int num_entries,
struct io_pgtable_cfg *cfg)
{
- if (selftest_running)
+ if (!(cfg->quirks & IO_PGTABLE_QUIRK_NO_DMA))
return;
dma_sync_single_for_device(cfg->iommu_dev, __arm_v7s_dma_addr(ptep),
@@ -280,6 +286,13 @@
else if (prot & IOMMU_CACHE)
pte |= ARM_V7S_ATTR_B | ARM_V7S_ATTR_C;
+ pte |= ARM_V7S_PTE_TYPE_PAGE;
+ if (lvl == 1 && (cfg->quirks & IO_PGTABLE_QUIRK_ARM_NS))
+ pte |= ARM_V7S_ATTR_NS_SECTION;
+
+ if (cfg->quirks & IO_PGTABLE_QUIRK_ARM_MTK_4GB)
+ pte |= ARM_V7S_ATTR_MTK_4GB;
+
return pte;
}
@@ -352,7 +365,7 @@
int lvl, int num_entries, arm_v7s_iopte *ptep)
{
struct io_pgtable_cfg *cfg = &data->iop.cfg;
- arm_v7s_iopte pte = arm_v7s_prot_to_pte(prot, lvl, cfg);
+ arm_v7s_iopte pte;
int i;
for (i = 0; i < num_entries; i++)
@@ -374,13 +387,7 @@
return -EEXIST;
}
- pte |= ARM_V7S_PTE_TYPE_PAGE;
- if (lvl == 1 && (cfg->quirks & IO_PGTABLE_QUIRK_ARM_NS))
- pte |= ARM_V7S_ATTR_NS_SECTION;
-
- if (cfg->quirks & IO_PGTABLE_QUIRK_ARM_MTK_4GB)
- pte |= ARM_V7S_ATTR_MTK_4GB;
-
+ pte = arm_v7s_prot_to_pte(prot, lvl, cfg);
if (num_entries > 1)
pte = arm_v7s_pte_to_cont(pte, lvl);
@@ -390,6 +397,30 @@
return 0;
}
+static arm_v7s_iopte arm_v7s_install_table(arm_v7s_iopte *table,
+ arm_v7s_iopte *ptep,
+ arm_v7s_iopte curr,
+ struct io_pgtable_cfg *cfg)
+{
+ arm_v7s_iopte old, new;
+
+ new = virt_to_phys(table) | ARM_V7S_PTE_TYPE_TABLE;
+ if (cfg->quirks & IO_PGTABLE_QUIRK_ARM_NS)
+ new |= ARM_V7S_ATTR_NS_TABLE;
+
+ /*
+ * Ensure the table itself is visible before its PTE can be.
+ * Whilst we could get away with cmpxchg64_release below, this
+ * doesn't have any ordering semantics when !CONFIG_SMP.
+ */
+ dma_wmb();
+
+ old = cmpxchg_relaxed(ptep, curr, new);
+ __arm_v7s_pte_sync(ptep, 1, cfg);
+
+ return old;
+}
+
static int __arm_v7s_map(struct arm_v7s_io_pgtable *data, unsigned long iova,
phys_addr_t paddr, size_t size, int prot,
int lvl, arm_v7s_iopte *ptep)
@@ -411,20 +442,23 @@
return -EINVAL;
/* Grab a pointer to the next level */
- pte = *ptep;
+ pte = READ_ONCE(*ptep);
if (!pte) {
cptep = __arm_v7s_alloc_table(lvl + 1, GFP_ATOMIC, data);
if (!cptep)
return -ENOMEM;
- pte = virt_to_phys(cptep) | ARM_V7S_PTE_TYPE_TABLE;
- if (cfg->quirks & IO_PGTABLE_QUIRK_ARM_NS)
- pte |= ARM_V7S_ATTR_NS_TABLE;
-
- __arm_v7s_set_pte(ptep, pte, 1, cfg);
- } else if (ARM_V7S_PTE_IS_TABLE(pte, lvl)) {
- cptep = iopte_deref(pte, lvl);
+ pte = arm_v7s_install_table(cptep, ptep, 0, cfg);
+ if (pte)
+ __arm_v7s_free_table(cptep, lvl + 1, data);
} else {
+ /* We've no easy way of knowing if it's synced yet, so... */
+ __arm_v7s_pte_sync(ptep, 1, cfg);
+ }
+
+ if (ARM_V7S_PTE_IS_TABLE(pte, lvl)) {
+ cptep = iopte_deref(pte, lvl);
+ } else if (pte) {
/* We require an unmap first */
WARN_ON(!selftest_running);
return -EEXIST;
@@ -445,6 +479,9 @@
if (!(prot & (IOMMU_READ | IOMMU_WRITE)))
return 0;
+ if (WARN_ON(upper_32_bits(iova) || upper_32_bits(paddr)))
+ return -ERANGE;
+
ret = __arm_v7s_map(data, iova, paddr, size, prot, 1, data->pgd);
/*
* Synchronise all PTE updates for the new mapping before there's
@@ -477,66 +514,73 @@
kfree(data);
}
-static void arm_v7s_split_cont(struct arm_v7s_io_pgtable *data,
- unsigned long iova, int idx, int lvl,
- arm_v7s_iopte *ptep)
+static arm_v7s_iopte arm_v7s_split_cont(struct arm_v7s_io_pgtable *data,
+ unsigned long iova, int idx, int lvl,
+ arm_v7s_iopte *ptep)
{
struct io_pgtable *iop = &data->iop;
arm_v7s_iopte pte;
size_t size = ARM_V7S_BLOCK_SIZE(lvl);
int i;
+ /* Check that we didn't lose a race to get the lock */
+ pte = *ptep;
+ if (!arm_v7s_pte_is_cont(pte, lvl))
+ return pte;
+
ptep -= idx & (ARM_V7S_CONT_PAGES - 1);
- pte = arm_v7s_cont_to_pte(*ptep, lvl);
- for (i = 0; i < ARM_V7S_CONT_PAGES; i++) {
- ptep[i] = pte;
- pte += size;
- }
+ pte = arm_v7s_cont_to_pte(pte, lvl);
+ for (i = 0; i < ARM_V7S_CONT_PAGES; i++)
+ ptep[i] = pte + i * size;
__arm_v7s_pte_sync(ptep, ARM_V7S_CONT_PAGES, &iop->cfg);
size *= ARM_V7S_CONT_PAGES;
io_pgtable_tlb_add_flush(iop, iova, size, size, true);
io_pgtable_tlb_sync(iop);
+ return pte;
}
static int arm_v7s_split_blk_unmap(struct arm_v7s_io_pgtable *data,
unsigned long iova, size_t size,
- arm_v7s_iopte *ptep)
+ arm_v7s_iopte blk_pte, arm_v7s_iopte *ptep)
{
- unsigned long blk_start, blk_end, blk_size;
- phys_addr_t blk_paddr;
- arm_v7s_iopte table = 0;
- int prot = arm_v7s_pte_to_prot(*ptep, 1);
+ struct io_pgtable_cfg *cfg = &data->iop.cfg;
+ arm_v7s_iopte pte, *tablep;
+ int i, unmap_idx, num_entries, num_ptes;
- blk_size = ARM_V7S_BLOCK_SIZE(1);
- blk_start = iova & ARM_V7S_LVL_MASK(1);
- blk_end = blk_start + ARM_V7S_BLOCK_SIZE(1);
- blk_paddr = *ptep & ARM_V7S_LVL_MASK(1);
+ tablep = __arm_v7s_alloc_table(2, GFP_ATOMIC, data);
+ if (!tablep)
+ return 0; /* Bytes unmapped */
- for (; blk_start < blk_end; blk_start += size, blk_paddr += size) {
- arm_v7s_iopte *tablep;
+ num_ptes = ARM_V7S_PTES_PER_LVL(2);
+ num_entries = size >> ARM_V7S_LVL_SHIFT(2);
+ unmap_idx = ARM_V7S_LVL_IDX(iova, 2);
+ pte = arm_v7s_prot_to_pte(arm_v7s_pte_to_prot(blk_pte, 1), 2, cfg);
+ if (num_entries > 1)
+ pte = arm_v7s_pte_to_cont(pte, 2);
+
+ for (i = 0; i < num_ptes; i += num_entries, pte += size) {
/* Unmap! */
- if (blk_start == iova)
+ if (i == unmap_idx)
continue;
- /* __arm_v7s_map expects a pointer to the start of the table */
- tablep = &table - ARM_V7S_LVL_IDX(blk_start, 1);
- if (__arm_v7s_map(data, blk_start, blk_paddr, size, prot, 1,
- tablep) < 0) {
- if (table) {
- /* Free the table we allocated */
- tablep = iopte_deref(table, 1);
- __arm_v7s_free_table(tablep, 2, data);
- }
- return 0; /* Bytes unmapped */
- }
+ __arm_v7s_set_pte(&tablep[i], pte, num_entries, cfg);
}
- __arm_v7s_set_pte(ptep, table, 1, &data->iop.cfg);
- iova &= ~(blk_size - 1);
- io_pgtable_tlb_add_flush(&data->iop, iova, blk_size, blk_size, true);
+ pte = arm_v7s_install_table(tablep, ptep, blk_pte, cfg);
+ if (pte != blk_pte) {
+ __arm_v7s_free_table(tablep, 2, data);
+
+ if (!ARM_V7S_PTE_IS_TABLE(pte, 1))
+ return 0;
+
+ tablep = iopte_deref(pte, 1);
+ return __arm_v7s_unmap(data, iova, size, 2, tablep);
+ }
+
+ io_pgtable_tlb_add_flush(&data->iop, iova, size, size, true);
return size;
}
@@ -555,17 +599,28 @@
idx = ARM_V7S_LVL_IDX(iova, lvl);
ptep += idx;
do {
- if (WARN_ON(!ARM_V7S_PTE_IS_VALID(ptep[i])))
+ pte[i] = READ_ONCE(ptep[i]);
+ if (WARN_ON(!ARM_V7S_PTE_IS_VALID(pte[i])))
return 0;
- pte[i] = ptep[i];
} while (++i < num_entries);
/*
* If we've hit a contiguous 'large page' entry at this level, it
* needs splitting first, unless we're unmapping the whole lot.
+ *
+ * For splitting, we can't rewrite 16 PTEs atomically, and since we
+ * can't necessarily assume TEX remap we don't have a software bit to
+ * mark live entries being split. In practice (i.e. DMA API code), we
+ * will never be splitting large pages anyway, so just wrap this edge
+ * case in a lock for the sake of correctness and be done with it.
*/
- if (num_entries <= 1 && arm_v7s_pte_is_cont(pte[0], lvl))
- arm_v7s_split_cont(data, iova, idx, lvl, ptep);
+ if (num_entries <= 1 && arm_v7s_pte_is_cont(pte[0], lvl)) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&data->split_lock, flags);
+ pte[0] = arm_v7s_split_cont(data, iova, idx, lvl, ptep);
+ spin_unlock_irqrestore(&data->split_lock, flags);
+ }
/* If the size matches this level, we're in the right place */
if (num_entries) {
@@ -593,7 +648,7 @@
* Insert a table at the next level to map the old region,
* minus the part we want to unmap
*/
- return arm_v7s_split_blk_unmap(data, iova, size, ptep);
+ return arm_v7s_split_blk_unmap(data, iova, size, pte[0], ptep);
}
/* Keep on walkin' */
@@ -607,6 +662,9 @@
struct arm_v7s_io_pgtable *data = io_pgtable_ops_to_data(ops);
size_t unmapped;
+ if (WARN_ON(upper_32_bits(iova)))
+ return 0;
+
unmapped = __arm_v7s_unmap(data, iova, size, 1, data->pgd);
if (unmapped)
io_pgtable_tlb_sync(&data->iop);
@@ -623,7 +681,8 @@
u32 mask;
do {
- pte = ptep[ARM_V7S_LVL_IDX(iova, ++lvl)];
+ ptep += ARM_V7S_LVL_IDX(iova, ++lvl);
+ pte = READ_ONCE(*ptep);
ptep = iopte_deref(pte, lvl);
} while (ARM_V7S_PTE_IS_TABLE(pte, lvl));
@@ -651,7 +710,8 @@
if (cfg->quirks & ~(IO_PGTABLE_QUIRK_ARM_NS |
IO_PGTABLE_QUIRK_NO_PERMS |
IO_PGTABLE_QUIRK_TLBI_ON_MAP |
- IO_PGTABLE_QUIRK_ARM_MTK_4GB))
+ IO_PGTABLE_QUIRK_ARM_MTK_4GB |
+ IO_PGTABLE_QUIRK_NO_DMA))
return NULL;
/* If ARM_MTK_4GB is enabled, the NO_PERMS is also expected. */
@@ -663,6 +723,7 @@
if (!data)
return NULL;
+ spin_lock_init(&data->split_lock);
data->l2_tables = kmem_cache_create("io-pgtable_armv7s_l2",
ARM_V7S_TABLE_SIZE(2),
ARM_V7S_TABLE_SIZE(2),
@@ -749,7 +810,7 @@
WARN_ON(cookie != cfg_cookie);
}
-static struct iommu_gather_ops dummy_tlb_ops = {
+static const struct iommu_gather_ops dummy_tlb_ops = {
.tlb_flush_all = dummy_tlb_flush_all,
.tlb_add_flush = dummy_tlb_add_flush,
.tlb_sync = dummy_tlb_sync,
@@ -768,7 +829,7 @@
.tlb = &dummy_tlb_ops,
.oas = 32,
.ias = 32,
- .quirks = IO_PGTABLE_QUIRK_ARM_NS,
+ .quirks = IO_PGTABLE_QUIRK_ARM_NS | IO_PGTABLE_QUIRK_NO_DMA,
.pgsize_bitmap = SZ_4K | SZ_64K | SZ_1M | SZ_16M,
};
unsigned int iova, size, iova_start;
diff --git a/drivers/iommu/io-pgtable-arm.c b/drivers/iommu/io-pgtable-arm.c
index 6e5df5e..e8018a3 100644
--- a/drivers/iommu/io-pgtable-arm.c
+++ b/drivers/iommu/io-pgtable-arm.c
@@ -20,6 +20,7 @@
#define pr_fmt(fmt) "arm-lpae io-pgtable: " fmt
+#include <linux/atomic.h>
#include <linux/iommu.h>
#include <linux/kernel.h>
#include <linux/sizes.h>
@@ -99,6 +100,8 @@
#define ARM_LPAE_PTE_ATTR_HI_MASK (((arm_lpae_iopte)6) << 52)
#define ARM_LPAE_PTE_ATTR_MASK (ARM_LPAE_PTE_ATTR_LO_MASK | \
ARM_LPAE_PTE_ATTR_HI_MASK)
+/* Software bit for solving coherency races */
+#define ARM_LPAE_PTE_SW_SYNC (((arm_lpae_iopte)1) << 55)
/* Stage-1 PTE */
#define ARM_LPAE_PTE_AP_UNPRIV (((arm_lpae_iopte)1) << 6)
@@ -217,7 +220,7 @@
if (!pages)
return NULL;
- if (!selftest_running) {
+ if (!(cfg->quirks & IO_PGTABLE_QUIRK_NO_DMA)) {
dma = dma_map_single(dev, pages, size, DMA_TO_DEVICE);
if (dma_mapping_error(dev, dma))
goto out_free;
@@ -243,40 +246,64 @@
static void __arm_lpae_free_pages(void *pages, size_t size,
struct io_pgtable_cfg *cfg)
{
- if (!selftest_running)
+ if (!(cfg->quirks & IO_PGTABLE_QUIRK_NO_DMA))
dma_unmap_single(cfg->iommu_dev, __arm_lpae_dma_addr(pages),
size, DMA_TO_DEVICE);
free_pages_exact(pages, size);
}
+static void __arm_lpae_sync_pte(arm_lpae_iopte *ptep,
+ struct io_pgtable_cfg *cfg)
+{
+ dma_sync_single_for_device(cfg->iommu_dev, __arm_lpae_dma_addr(ptep),
+ sizeof(*ptep), DMA_TO_DEVICE);
+}
+
static void __arm_lpae_set_pte(arm_lpae_iopte *ptep, arm_lpae_iopte pte,
struct io_pgtable_cfg *cfg)
{
*ptep = pte;
- if (!selftest_running)
- dma_sync_single_for_device(cfg->iommu_dev,
- __arm_lpae_dma_addr(ptep),
- sizeof(pte), DMA_TO_DEVICE);
+ if (!(cfg->quirks & IO_PGTABLE_QUIRK_NO_DMA))
+ __arm_lpae_sync_pte(ptep, cfg);
}
static int __arm_lpae_unmap(struct arm_lpae_io_pgtable *data,
unsigned long iova, size_t size, int lvl,
arm_lpae_iopte *ptep);
+static void __arm_lpae_init_pte(struct arm_lpae_io_pgtable *data,
+ phys_addr_t paddr, arm_lpae_iopte prot,
+ int lvl, arm_lpae_iopte *ptep)
+{
+ arm_lpae_iopte pte = prot;
+
+ if (data->iop.cfg.quirks & IO_PGTABLE_QUIRK_ARM_NS)
+ pte |= ARM_LPAE_PTE_NS;
+
+ if (lvl == ARM_LPAE_MAX_LEVELS - 1)
+ pte |= ARM_LPAE_PTE_TYPE_PAGE;
+ else
+ pte |= ARM_LPAE_PTE_TYPE_BLOCK;
+
+ pte |= ARM_LPAE_PTE_AF | ARM_LPAE_PTE_SH_IS;
+ pte |= pfn_to_iopte(paddr >> data->pg_shift, data);
+
+ __arm_lpae_set_pte(ptep, pte, &data->iop.cfg);
+}
+
static int arm_lpae_init_pte(struct arm_lpae_io_pgtable *data,
unsigned long iova, phys_addr_t paddr,
arm_lpae_iopte prot, int lvl,
arm_lpae_iopte *ptep)
{
- arm_lpae_iopte pte = prot;
- struct io_pgtable_cfg *cfg = &data->iop.cfg;
+ arm_lpae_iopte pte = *ptep;
- if (iopte_leaf(*ptep, lvl)) {
+ if (iopte_leaf(pte, lvl)) {
/* We require an unmap first */
WARN_ON(!selftest_running);
return -EEXIST;
- } else if (iopte_type(*ptep, lvl) == ARM_LPAE_PTE_TYPE_TABLE) {
+ } else if (iopte_type(pte, lvl) == ARM_LPAE_PTE_TYPE_TABLE) {
/*
* We need to unmap and free the old table before
* overwriting it with a block entry.
@@ -289,27 +316,49 @@
return -EINVAL;
}
- if (cfg->quirks & IO_PGTABLE_QUIRK_ARM_NS)
- pte |= ARM_LPAE_PTE_NS;
-
- if (lvl == ARM_LPAE_MAX_LEVELS - 1)
- pte |= ARM_LPAE_PTE_TYPE_PAGE;
- else
- pte |= ARM_LPAE_PTE_TYPE_BLOCK;
-
- pte |= ARM_LPAE_PTE_AF | ARM_LPAE_PTE_SH_IS;
- pte |= pfn_to_iopte(paddr >> data->pg_shift, data);
-
- __arm_lpae_set_pte(ptep, pte, cfg);
+ __arm_lpae_init_pte(data, paddr, prot, lvl, ptep);
return 0;
}
+static arm_lpae_iopte arm_lpae_install_table(arm_lpae_iopte *table,
+ arm_lpae_iopte *ptep,
+ arm_lpae_iopte curr,
+ struct io_pgtable_cfg *cfg)
+{
+ arm_lpae_iopte old, new;
+
+ new = __pa(table) | ARM_LPAE_PTE_TYPE_TABLE;
+ if (cfg->quirks & IO_PGTABLE_QUIRK_ARM_NS)
+ new |= ARM_LPAE_PTE_NSTABLE;
+
+ /*
+ * Ensure the table itself is visible before its PTE can be.
+ * Whilst we could get away with cmpxchg64_release below, this
+ * doesn't have any ordering semantics when !CONFIG_SMP.
+ */
+ dma_wmb();
+
+ old = cmpxchg64_relaxed(ptep, curr, new);
+
+ if ((cfg->quirks & IO_PGTABLE_QUIRK_NO_DMA) ||
+ (old & ARM_LPAE_PTE_SW_SYNC))
+ return old;
+
+ /* Even if it's not ours, there's no point waiting; just kick it */
+ __arm_lpae_sync_pte(ptep, cfg);
+ if (old == curr)
+ WRITE_ONCE(*ptep, new | ARM_LPAE_PTE_SW_SYNC);
+
+ return old;
+}
+
static int __arm_lpae_map(struct arm_lpae_io_pgtable *data, unsigned long iova,
phys_addr_t paddr, size_t size, arm_lpae_iopte prot,
int lvl, arm_lpae_iopte *ptep)
{
arm_lpae_iopte *cptep, pte;
size_t block_size = ARM_LPAE_BLOCK_SIZE(lvl, data);
+ size_t tblsz = ARM_LPAE_GRANULE(data);
struct io_pgtable_cfg *cfg = &data->iop.cfg;
/* Find our entry at the current level */
@@ -324,20 +373,23 @@
return -EINVAL;
/* Grab a pointer to the next level */
- pte = *ptep;
+ pte = READ_ONCE(*ptep);
if (!pte) {
- cptep = __arm_lpae_alloc_pages(ARM_LPAE_GRANULE(data),
- GFP_ATOMIC, cfg);
+ cptep = __arm_lpae_alloc_pages(tblsz, GFP_ATOMIC, cfg);
if (!cptep)
return -ENOMEM;
- pte = __pa(cptep) | ARM_LPAE_PTE_TYPE_TABLE;
- if (cfg->quirks & IO_PGTABLE_QUIRK_ARM_NS)
- pte |= ARM_LPAE_PTE_NSTABLE;
- __arm_lpae_set_pte(ptep, pte, cfg);
- } else if (!iopte_leaf(pte, lvl)) {
+ pte = arm_lpae_install_table(cptep, ptep, 0, cfg);
+ if (pte)
+ __arm_lpae_free_pages(cptep, tblsz, cfg);
+ } else if (!(cfg->quirks & IO_PGTABLE_QUIRK_NO_DMA) &&
+ !(pte & ARM_LPAE_PTE_SW_SYNC)) {
+ __arm_lpae_sync_pte(ptep, cfg);
+ }
+
+ if (pte && !iopte_leaf(pte, lvl)) {
cptep = iopte_deref(pte, data);
- } else {
+ } else if (pte) {
/* We require an unmap first */
WARN_ON(!selftest_running);
return -EEXIST;
@@ -400,6 +452,10 @@
if (!(iommu_prot & (IOMMU_READ | IOMMU_WRITE)))
return 0;
+ if (WARN_ON(iova >= (1ULL << data->iop.cfg.ias) ||
+ paddr >= (1ULL << data->iop.cfg.oas)))
+ return -ERANGE;
+
prot = arm_lpae_prot_to_pte(data, iommu_prot);
ret = __arm_lpae_map(data, iova, paddr, size, prot, lvl, ptep);
/*
@@ -452,40 +508,55 @@
static int arm_lpae_split_blk_unmap(struct arm_lpae_io_pgtable *data,
unsigned long iova, size_t size,
- arm_lpae_iopte prot, int lvl,
- arm_lpae_iopte *ptep, size_t blk_size)
+ arm_lpae_iopte blk_pte, int lvl,
+ arm_lpae_iopte *ptep)
{
- unsigned long blk_start, blk_end;
+ struct io_pgtable_cfg *cfg = &data->iop.cfg;
+ arm_lpae_iopte pte, *tablep;
phys_addr_t blk_paddr;
- arm_lpae_iopte table = 0;
+ size_t tablesz = ARM_LPAE_GRANULE(data);
+ size_t split_sz = ARM_LPAE_BLOCK_SIZE(lvl, data);
+ int i, unmap_idx = -1;
- blk_start = iova & ~(blk_size - 1);
- blk_end = blk_start + blk_size;
- blk_paddr = iopte_to_pfn(*ptep, data) << data->pg_shift;
+ if (WARN_ON(lvl == ARM_LPAE_MAX_LEVELS))
+ return 0;
- for (; blk_start < blk_end; blk_start += size, blk_paddr += size) {
- arm_lpae_iopte *tablep;
+ tablep = __arm_lpae_alloc_pages(tablesz, GFP_ATOMIC, cfg);
+ if (!tablep)
+ return 0; /* Bytes unmapped */
+ if (size == split_sz)
+ unmap_idx = ARM_LPAE_LVL_IDX(iova, lvl, data);
+
+ blk_paddr = iopte_to_pfn(blk_pte, data) << data->pg_shift;
+ pte = iopte_prot(blk_pte);
+
+ for (i = 0; i < tablesz / sizeof(pte); i++, blk_paddr += split_sz) {
/* Unmap! */
- if (blk_start == iova)
+ if (i == unmap_idx)
continue;
- /* __arm_lpae_map expects a pointer to the start of the table */
- tablep = &table - ARM_LPAE_LVL_IDX(blk_start, lvl, data);
- if (__arm_lpae_map(data, blk_start, blk_paddr, size, prot, lvl,
- tablep) < 0) {
- if (table) {
- /* Free the table we allocated */
- tablep = iopte_deref(table, data);
- __arm_lpae_free_pgtable(data, lvl + 1, tablep);
- }
- return 0; /* Bytes unmapped */
- }
+ __arm_lpae_init_pte(data, blk_paddr, pte, lvl, &tablep[i]);
}
- __arm_lpae_set_pte(ptep, table, &data->iop.cfg);
- iova &= ~(blk_size - 1);
- io_pgtable_tlb_add_flush(&data->iop, iova, blk_size, blk_size, true);
+ pte = arm_lpae_install_table(tablep, ptep, blk_pte, cfg);
+ if (pte != blk_pte) {
+ __arm_lpae_free_pages(tablep, tablesz, cfg);
+ /*
+ * We may race against someone unmapping another part of this
+ * block, but anything else is invalid. We can't misinterpret
+ * a page entry here since we're never at the last level.
+ */
+ if (iopte_type(pte, lvl - 1) != ARM_LPAE_PTE_TYPE_TABLE)
+ return 0;
+
+ tablep = iopte_deref(pte, data);
+ }
+
+ if (unmap_idx < 0)
+ return __arm_lpae_unmap(data, iova, size, lvl, tablep);
+
+ io_pgtable_tlb_add_flush(&data->iop, iova, size, size, true);
return size;
}
@@ -495,19 +566,18 @@
{
arm_lpae_iopte pte;
struct io_pgtable *iop = &data->iop;
- size_t blk_size = ARM_LPAE_BLOCK_SIZE(lvl, data);
/* Something went horribly wrong and we ran out of page table */
if (WARN_ON(lvl == ARM_LPAE_MAX_LEVELS))
return 0;
ptep += ARM_LPAE_LVL_IDX(iova, lvl, data);
- pte = *ptep;
+ pte = READ_ONCE(*ptep);
if (WARN_ON(!pte))
return 0;
/* If the size matches this level, we're in the right place */
- if (size == blk_size) {
+ if (size == ARM_LPAE_BLOCK_SIZE(lvl, data)) {
__arm_lpae_set_pte(ptep, 0, &iop->cfg);
if (!iopte_leaf(pte, lvl)) {
@@ -527,9 +597,8 @@
* Insert a table at the next level to map the old region,
* minus the part we want to unmap
*/
- return arm_lpae_split_blk_unmap(data, iova, size,
- iopte_prot(pte), lvl, ptep,
- blk_size);
+ return arm_lpae_split_blk_unmap(data, iova, size, pte,
+ lvl + 1, ptep);
}
/* Keep on walkin' */
@@ -545,6 +614,9 @@
arm_lpae_iopte *ptep = data->pgd;
int lvl = ARM_LPAE_START_LVL(data);
+ if (WARN_ON(iova >= (1ULL << data->iop.cfg.ias)))
+ return 0;
+
unmapped = __arm_lpae_unmap(data, iova, size, lvl, ptep);
if (unmapped)
io_pgtable_tlb_sync(&data->iop);
@@ -565,7 +637,8 @@
return 0;
/* Grab the IOPTE we're interested in */
- pte = *(ptep + ARM_LPAE_LVL_IDX(iova, lvl, data));
+ ptep += ARM_LPAE_LVL_IDX(iova, lvl, data);
+ pte = READ_ONCE(*ptep);
/* Valid entry? */
if (!pte)
@@ -673,7 +746,7 @@
u64 reg;
struct arm_lpae_io_pgtable *data;
- if (cfg->quirks & ~IO_PGTABLE_QUIRK_ARM_NS)
+ if (cfg->quirks & ~(IO_PGTABLE_QUIRK_ARM_NS | IO_PGTABLE_QUIRK_NO_DMA))
return NULL;
data = arm_lpae_alloc_pgtable(cfg);
@@ -762,7 +835,7 @@
struct arm_lpae_io_pgtable *data;
/* The NS quirk doesn't apply at stage 2 */
- if (cfg->quirks)
+ if (cfg->quirks & ~IO_PGTABLE_QUIRK_NO_DMA)
return NULL;
data = arm_lpae_alloc_pgtable(cfg);
@@ -1066,6 +1139,7 @@
struct io_pgtable_cfg cfg = {
.tlb = &dummy_tlb_ops,
.oas = 48,
+ .quirks = IO_PGTABLE_QUIRK_NO_DMA,
};
for (i = 0; i < ARRAY_SIZE(pgsize); ++i) {
diff --git a/drivers/iommu/io-pgtable.h b/drivers/iommu/io-pgtable.h
index 969d82c..a3e6670 100644
--- a/drivers/iommu/io-pgtable.h
+++ b/drivers/iommu/io-pgtable.h
@@ -65,11 +65,17 @@
* PTEs, for Mediatek IOMMUs which treat it as a 33rd address bit
* when the SoC is in "4GB mode" and they can only access the high
* remap of DRAM (0x1_00000000 to 0x1_ffffffff).
+ *
+ * IO_PGTABLE_QUIRK_NO_DMA: Guarantees that the tables will only ever
+ * be accessed by a fully cache-coherent IOMMU or CPU (e.g. for a
+ * software-emulated IOMMU), such that pagetable updates need not
+ * be treated as explicit DMA data.
*/
#define IO_PGTABLE_QUIRK_ARM_NS BIT(0)
#define IO_PGTABLE_QUIRK_NO_PERMS BIT(1)
#define IO_PGTABLE_QUIRK_TLBI_ON_MAP BIT(2)
#define IO_PGTABLE_QUIRK_ARM_MTK_4GB BIT(3)
+ #define IO_PGTABLE_QUIRK_NO_DMA BIT(4)
unsigned long quirks;
unsigned long pgsize_bitmap;
unsigned int ias;
@@ -152,14 +158,12 @@
* @fmt: The page table format.
* @cookie: An opaque token provided by the IOMMU driver and passed back to
* any callback routines.
- * @tlb_sync_pending: Private flag for optimising out redundant syncs.
* @cfg: A copy of the page table configuration.
* @ops: The page table operations in use for this set of page tables.
*/
struct io_pgtable {
enum io_pgtable_fmt fmt;
void *cookie;
- bool tlb_sync_pending;
struct io_pgtable_cfg cfg;
struct io_pgtable_ops ops;
};
@@ -169,22 +173,17 @@
static inline void io_pgtable_tlb_flush_all(struct io_pgtable *iop)
{
iop->cfg.tlb->tlb_flush_all(iop->cookie);
- iop->tlb_sync_pending = true;
}
static inline void io_pgtable_tlb_add_flush(struct io_pgtable *iop,
unsigned long iova, size_t size, size_t granule, bool leaf)
{
iop->cfg.tlb->tlb_add_flush(iova, size, granule, leaf, iop->cookie);
- iop->tlb_sync_pending = true;
}
static inline void io_pgtable_tlb_sync(struct io_pgtable *iop)
{
- if (iop->tlb_sync_pending) {
- iop->cfg.tlb->tlb_sync(iop->cookie);
- iop->tlb_sync_pending = false;
- }
+ iop->cfg.tlb->tlb_sync(iop->cookie);
}
/**
diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index cf7ca7e..3f6ea16 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -915,13 +915,7 @@
*/
struct iommu_group *generic_device_group(struct device *dev)
{
- struct iommu_group *group;
-
- group = iommu_group_alloc();
- if (IS_ERR(group))
- return NULL;
-
- return group;
+ return iommu_group_alloc();
}
/*
@@ -988,11 +982,7 @@
return group;
/* No shared group found, allocate new */
- group = iommu_group_alloc();
- if (IS_ERR(group))
- return NULL;
-
- return group;
+ return iommu_group_alloc();
}
/**
@@ -1020,6 +1010,9 @@
if (ops && ops->device_group)
group = ops->device_group(dev);
+ if (WARN_ON_ONCE(group == NULL))
+ return ERR_PTR(-EINVAL);
+
if (IS_ERR(group))
return group;
diff --git a/drivers/iommu/iova.c b/drivers/iommu/iova.c
index 5c88ba7..246f14c 100644
--- a/drivers/iommu/iova.c
+++ b/drivers/iommu/iova.c
@@ -22,6 +22,7 @@
#include <linux/slab.h>
#include <linux/smp.h>
#include <linux/bitops.h>
+#include <linux/cpu.h>
static bool iova_rcache_insert(struct iova_domain *iovad,
unsigned long pfn,
@@ -48,7 +49,7 @@
iovad->cached32_node = NULL;
iovad->granule = granule;
iovad->start_pfn = start_pfn;
- iovad->dma_32bit_pfn = pfn_32bit;
+ iovad->dma_32bit_pfn = pfn_32bit + 1;
init_iova_rcaches(iovad);
}
EXPORT_SYMBOL_GPL(init_iova_domain);
@@ -63,7 +64,7 @@
struct rb_node *prev_node = rb_prev(iovad->cached32_node);
struct iova *curr_iova =
rb_entry(iovad->cached32_node, struct iova, node);
- *limit_pfn = curr_iova->pfn_lo - 1;
+ *limit_pfn = curr_iova->pfn_lo;
return prev_node;
}
}
@@ -135,7 +136,7 @@
static unsigned int
iova_get_pad_size(unsigned int size, unsigned int limit_pfn)
{
- return (limit_pfn + 1 - size) & (__roundup_pow_of_two(size) - 1);
+ return (limit_pfn - size) & (__roundup_pow_of_two(size) - 1);
}
static int __alloc_and_insert_iova_range(struct iova_domain *iovad,
@@ -155,18 +156,15 @@
while (curr) {
struct iova *curr_iova = rb_entry(curr, struct iova, node);
- if (limit_pfn < curr_iova->pfn_lo)
+ if (limit_pfn <= curr_iova->pfn_lo) {
goto move_left;
- else if (limit_pfn < curr_iova->pfn_hi)
- goto adjust_limit_pfn;
- else {
+ } else if (limit_pfn > curr_iova->pfn_hi) {
if (size_aligned)
pad_size = iova_get_pad_size(size, limit_pfn);
- if ((curr_iova->pfn_hi + size + pad_size) <= limit_pfn)
+ if ((curr_iova->pfn_hi + size + pad_size) < limit_pfn)
break; /* found a free slot */
}
-adjust_limit_pfn:
- limit_pfn = curr_iova->pfn_lo ? (curr_iova->pfn_lo - 1) : 0;
+ limit_pfn = curr_iova->pfn_lo;
move_left:
prev = curr;
curr = rb_prev(curr);
@@ -182,7 +180,7 @@
}
/* pfn_lo will point to size aligned address if size_aligned is set */
- new->pfn_lo = limit_pfn - (size + pad_size) + 1;
+ new->pfn_lo = limit_pfn - (size + pad_size);
new->pfn_hi = new->pfn_lo + size - 1;
/* If we have 'prev', it's a valid place to start the insertion. */
@@ -269,7 +267,7 @@
if (!new_iova)
return NULL;
- ret = __alloc_and_insert_iova_range(iovad, size, limit_pfn,
+ ret = __alloc_and_insert_iova_range(iovad, size, limit_pfn + 1,
new_iova, size_aligned);
if (ret) {
@@ -398,10 +396,8 @@
/* Try replenishing IOVAs by flushing rcache. */
flushed_rcache = true;
- preempt_disable();
for_each_online_cpu(cpu)
free_cpu_cached_iovas(cpu, iovad);
- preempt_enable();
goto retry;
}
@@ -729,7 +725,7 @@
bool can_insert = false;
unsigned long flags;
- cpu_rcache = get_cpu_ptr(rcache->cpu_rcaches);
+ cpu_rcache = raw_cpu_ptr(rcache->cpu_rcaches);
spin_lock_irqsave(&cpu_rcache->lock, flags);
if (!iova_magazine_full(cpu_rcache->loaded)) {
@@ -759,7 +755,6 @@
iova_magazine_push(cpu_rcache->loaded, iova_pfn);
spin_unlock_irqrestore(&cpu_rcache->lock, flags);
- put_cpu_ptr(rcache->cpu_rcaches);
if (mag_to_free) {
iova_magazine_free_pfns(mag_to_free, iovad);
@@ -793,7 +788,7 @@
bool has_pfn = false;
unsigned long flags;
- cpu_rcache = get_cpu_ptr(rcache->cpu_rcaches);
+ cpu_rcache = raw_cpu_ptr(rcache->cpu_rcaches);
spin_lock_irqsave(&cpu_rcache->lock, flags);
if (!iova_magazine_empty(cpu_rcache->loaded)) {
@@ -815,7 +810,6 @@
iova_pfn = iova_magazine_pop(cpu_rcache->loaded, limit_pfn);
spin_unlock_irqrestore(&cpu_rcache->lock, flags);
- put_cpu_ptr(rcache->cpu_rcaches);
return iova_pfn;
}
diff --git a/drivers/iommu/ipmmu-vmsa.c b/drivers/iommu/ipmmu-vmsa.c
index b7e14ee..2a38aa1 100644
--- a/drivers/iommu/ipmmu-vmsa.c
+++ b/drivers/iommu/ipmmu-vmsa.c
@@ -8,7 +8,9 @@
* the Free Software Foundation; version 2 of the License.
*/
+#include <linux/bitmap.h>
#include <linux/delay.h>
+#include <linux/dma-iommu.h>
#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/export.h>
@@ -21,17 +23,24 @@
#include <linux/sizes.h>
#include <linux/slab.h>
+#if defined(CONFIG_ARM) && !defined(CONFIG_IOMMU_DMA)
#include <asm/dma-iommu.h>
#include <asm/pgalloc.h>
+#endif
#include "io-pgtable.h"
+#define IPMMU_CTX_MAX 1
+
struct ipmmu_vmsa_device {
struct device *dev;
void __iomem *base;
struct list_head list;
unsigned int num_utlbs;
+ spinlock_t lock; /* Protects ctx and domains[] */
+ DECLARE_BITMAP(ctx, IPMMU_CTX_MAX);
+ struct ipmmu_vmsa_domain *domains[IPMMU_CTX_MAX];
struct dma_iommu_mapping *mapping;
};
@@ -47,10 +56,12 @@
spinlock_t lock; /* Protects mappings */
};
-struct ipmmu_vmsa_archdata {
+struct ipmmu_vmsa_iommu_priv {
struct ipmmu_vmsa_device *mmu;
unsigned int *utlbs;
unsigned int num_utlbs;
+ struct device *dev;
+ struct list_head list;
};
static DEFINE_SPINLOCK(ipmmu_devices_lock);
@@ -61,6 +72,24 @@
return container_of(dom, struct ipmmu_vmsa_domain, io_domain);
}
+
+static struct ipmmu_vmsa_iommu_priv *to_priv(struct device *dev)
+{
+#if defined(CONFIG_ARM)
+ return dev->archdata.iommu;
+#else
+ return dev->iommu_fwspec->iommu_priv;
+#endif
+}
+static void set_priv(struct device *dev, struct ipmmu_vmsa_iommu_priv *p)
+{
+#if defined(CONFIG_ARM)
+ dev->archdata.iommu = p;
+#else
+ dev->iommu_fwspec->iommu_priv = p;
+#endif
+}
+
#define TLB_LOOP_TIMEOUT 100 /* 100us */
/* -----------------------------------------------------------------------------
@@ -293,9 +322,29 @@
* Domain/Context Management
*/
+static int ipmmu_domain_allocate_context(struct ipmmu_vmsa_device *mmu,
+ struct ipmmu_vmsa_domain *domain)
+{
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&mmu->lock, flags);
+
+ ret = find_first_zero_bit(mmu->ctx, IPMMU_CTX_MAX);
+ if (ret != IPMMU_CTX_MAX) {
+ mmu->domains[ret] = domain;
+ set_bit(ret, mmu->ctx);
+ }
+
+ spin_unlock_irqrestore(&mmu->lock, flags);
+
+ return ret;
+}
+
static int ipmmu_domain_init_context(struct ipmmu_vmsa_domain *domain)
{
u64 ttbr;
+ int ret;
/*
* Allocate the page table operations.
@@ -309,7 +358,7 @@
* non-secure mode.
*/
domain->cfg.quirks = IO_PGTABLE_QUIRK_ARM_NS;
- domain->cfg.pgsize_bitmap = SZ_1G | SZ_2M | SZ_4K,
+ domain->cfg.pgsize_bitmap = SZ_1G | SZ_2M | SZ_4K;
domain->cfg.ias = 32;
domain->cfg.oas = 40;
domain->cfg.tlb = &ipmmu_gather_ops;
@@ -327,10 +376,15 @@
return -EINVAL;
/*
- * TODO: When adding support for multiple contexts, find an unused
- * context.
+ * Find an unused context.
*/
- domain->context_id = 0;
+ ret = ipmmu_domain_allocate_context(domain->mmu, domain);
+ if (ret == IPMMU_CTX_MAX) {
+ free_io_pgtable_ops(domain->iop);
+ return -EBUSY;
+ }
+
+ domain->context_id = ret;
/* TTBR0 */
ttbr = domain->cfg.arm_lpae_s1_cfg.ttbr[0];
@@ -372,6 +426,19 @@
return 0;
}
+static void ipmmu_domain_free_context(struct ipmmu_vmsa_device *mmu,
+ unsigned int context_id)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&mmu->lock, flags);
+
+ clear_bit(context_id, mmu->ctx);
+ mmu->domains[context_id] = NULL;
+
+ spin_unlock_irqrestore(&mmu->lock, flags);
+}
+
static void ipmmu_domain_destroy_context(struct ipmmu_vmsa_domain *domain)
{
/*
@@ -382,6 +449,7 @@
*/
ipmmu_ctx_write(domain, IMCTR, IMCTR_FLUSH);
ipmmu_tlb_sync(domain);
+ ipmmu_domain_free_context(domain->mmu, domain->context_id);
}
/* -----------------------------------------------------------------------------
@@ -439,29 +507,35 @@
static irqreturn_t ipmmu_irq(int irq, void *dev)
{
struct ipmmu_vmsa_device *mmu = dev;
- struct iommu_domain *io_domain;
- struct ipmmu_vmsa_domain *domain;
+ irqreturn_t status = IRQ_NONE;
+ unsigned int i;
+ unsigned long flags;
- if (!mmu->mapping)
- return IRQ_NONE;
+ spin_lock_irqsave(&mmu->lock, flags);
- io_domain = mmu->mapping->domain;
- domain = to_vmsa_domain(io_domain);
+ /*
+ * Check interrupts for all active contexts.
+ */
+ for (i = 0; i < IPMMU_CTX_MAX; i++) {
+ if (!mmu->domains[i])
+ continue;
+ if (ipmmu_domain_irq(mmu->domains[i]) == IRQ_HANDLED)
+ status = IRQ_HANDLED;
+ }
- return ipmmu_domain_irq(domain);
+ spin_unlock_irqrestore(&mmu->lock, flags);
+
+ return status;
}
/* -----------------------------------------------------------------------------
* IOMMU Operations
*/
-static struct iommu_domain *ipmmu_domain_alloc(unsigned type)
+static struct iommu_domain *__ipmmu_domain_alloc(unsigned type)
{
struct ipmmu_vmsa_domain *domain;
- if (type != IOMMU_DOMAIN_UNMANAGED)
- return NULL;
-
domain = kzalloc(sizeof(*domain), GFP_KERNEL);
if (!domain)
return NULL;
@@ -487,8 +561,8 @@
static int ipmmu_attach_device(struct iommu_domain *io_domain,
struct device *dev)
{
- struct ipmmu_vmsa_archdata *archdata = dev->archdata.iommu;
- struct ipmmu_vmsa_device *mmu = archdata->mmu;
+ struct ipmmu_vmsa_iommu_priv *priv = to_priv(dev);
+ struct ipmmu_vmsa_device *mmu = priv->mmu;
struct ipmmu_vmsa_domain *domain = to_vmsa_domain(io_domain);
unsigned long flags;
unsigned int i;
@@ -513,15 +587,16 @@
dev_err(dev, "Can't attach IPMMU %s to domain on IPMMU %s\n",
dev_name(mmu->dev), dev_name(domain->mmu->dev));
ret = -EINVAL;
- }
+ } else
+ dev_info(dev, "Reusing IPMMU context %u\n", domain->context_id);
spin_unlock_irqrestore(&domain->lock, flags);
if (ret < 0)
return ret;
- for (i = 0; i < archdata->num_utlbs; ++i)
- ipmmu_utlb_enable(domain, archdata->utlbs[i]);
+ for (i = 0; i < priv->num_utlbs; ++i)
+ ipmmu_utlb_enable(domain, priv->utlbs[i]);
return 0;
}
@@ -529,12 +604,12 @@
static void ipmmu_detach_device(struct iommu_domain *io_domain,
struct device *dev)
{
- struct ipmmu_vmsa_archdata *archdata = dev->archdata.iommu;
+ struct ipmmu_vmsa_iommu_priv *priv = to_priv(dev);
struct ipmmu_vmsa_domain *domain = to_vmsa_domain(io_domain);
unsigned int i;
- for (i = 0; i < archdata->num_utlbs; ++i)
- ipmmu_utlb_disable(domain, archdata->utlbs[i]);
+ for (i = 0; i < priv->num_utlbs; ++i)
+ ipmmu_utlb_disable(domain, priv->utlbs[i]);
/*
* TODO: Optimize by disabling the context when no device is attached.
@@ -595,22 +670,15 @@
return 0;
}
-static int ipmmu_add_device(struct device *dev)
+static int ipmmu_init_platform_device(struct device *dev)
{
- struct ipmmu_vmsa_archdata *archdata;
+ struct ipmmu_vmsa_iommu_priv *priv;
struct ipmmu_vmsa_device *mmu;
- struct iommu_group *group = NULL;
unsigned int *utlbs;
unsigned int i;
int num_utlbs;
int ret = -ENODEV;
- if (dev->archdata.iommu) {
- dev_warn(dev, "IOMMU driver already assigned to device %s\n",
- dev_name(dev));
- return -EINVAL;
- }
-
/* Find the master corresponding to the device. */
num_utlbs = of_count_phandle_with_args(dev->of_node, "iommus",
@@ -647,6 +715,46 @@
}
}
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ ret = -ENOMEM;
+ goto error;
+ }
+
+ priv->mmu = mmu;
+ priv->utlbs = utlbs;
+ priv->num_utlbs = num_utlbs;
+ priv->dev = dev;
+ set_priv(dev, priv);
+ return 0;
+
+error:
+ kfree(utlbs);
+ return ret;
+}
+
+#if defined(CONFIG_ARM) && !defined(CONFIG_IOMMU_DMA)
+
+static struct iommu_domain *ipmmu_domain_alloc(unsigned type)
+{
+ if (type != IOMMU_DOMAIN_UNMANAGED)
+ return NULL;
+
+ return __ipmmu_domain_alloc(type);
+}
+
+static int ipmmu_add_device(struct device *dev)
+{
+ struct ipmmu_vmsa_device *mmu = NULL;
+ struct iommu_group *group;
+ int ret;
+
+ if (to_priv(dev)) {
+ dev_warn(dev, "IOMMU driver already assigned to device %s\n",
+ dev_name(dev));
+ return -EINVAL;
+ }
+
/* Create a device group and add the device to it. */
group = iommu_group_alloc();
if (IS_ERR(group)) {
@@ -664,16 +772,9 @@
goto error;
}
- archdata = kzalloc(sizeof(*archdata), GFP_KERNEL);
- if (!archdata) {
- ret = -ENOMEM;
+ ret = ipmmu_init_platform_device(dev);
+ if (ret < 0)
goto error;
- }
-
- archdata->mmu = mmu;
- archdata->utlbs = utlbs;
- archdata->num_utlbs = num_utlbs;
- dev->archdata.iommu = archdata;
/*
* Create the ARM mapping, used by the ARM DMA mapping core to allocate
@@ -684,6 +785,7 @@
* - Make the mapping size configurable ? We currently use a 2GB mapping
* at a 1GB offset to ensure that NULL VAs will fault.
*/
+ mmu = to_priv(dev)->mmu;
if (!mmu->mapping) {
struct dma_iommu_mapping *mapping;
@@ -708,30 +810,30 @@
return 0;
error:
- arm_iommu_release_mapping(mmu->mapping);
-
- kfree(dev->archdata.iommu);
- kfree(utlbs);
-
- dev->archdata.iommu = NULL;
+ if (mmu)
+ arm_iommu_release_mapping(mmu->mapping);
if (!IS_ERR_OR_NULL(group))
iommu_group_remove_device(dev);
+ kfree(to_priv(dev)->utlbs);
+ kfree(to_priv(dev));
+ set_priv(dev, NULL);
+
return ret;
}
static void ipmmu_remove_device(struct device *dev)
{
- struct ipmmu_vmsa_archdata *archdata = dev->archdata.iommu;
+ struct ipmmu_vmsa_iommu_priv *priv = to_priv(dev);
arm_iommu_detach_device(dev);
iommu_group_remove_device(dev);
- kfree(archdata->utlbs);
- kfree(archdata);
+ kfree(priv->utlbs);
+ kfree(priv);
- dev->archdata.iommu = NULL;
+ set_priv(dev, NULL);
}
static const struct iommu_ops ipmmu_ops = {
@@ -748,6 +850,144 @@
.pgsize_bitmap = SZ_1G | SZ_2M | SZ_4K,
};
+#endif /* !CONFIG_ARM && CONFIG_IOMMU_DMA */
+
+#ifdef CONFIG_IOMMU_DMA
+
+static DEFINE_SPINLOCK(ipmmu_slave_devices_lock);
+static LIST_HEAD(ipmmu_slave_devices);
+
+static struct iommu_domain *ipmmu_domain_alloc_dma(unsigned type)
+{
+ struct iommu_domain *io_domain = NULL;
+
+ switch (type) {
+ case IOMMU_DOMAIN_UNMANAGED:
+ io_domain = __ipmmu_domain_alloc(type);
+ break;
+
+ case IOMMU_DOMAIN_DMA:
+ io_domain = __ipmmu_domain_alloc(type);
+ if (io_domain)
+ iommu_get_dma_cookie(io_domain);
+ break;
+ }
+
+ return io_domain;
+}
+
+static void ipmmu_domain_free_dma(struct iommu_domain *io_domain)
+{
+ switch (io_domain->type) {
+ case IOMMU_DOMAIN_DMA:
+ iommu_put_dma_cookie(io_domain);
+ /* fall-through */
+ default:
+ ipmmu_domain_free(io_domain);
+ break;
+ }
+}
+
+static int ipmmu_add_device_dma(struct device *dev)
+{
+ struct iommu_fwspec *fwspec = dev->iommu_fwspec;
+ struct iommu_group *group;
+
+ /*
+ * Only let through devices that have been verified in xlate()
+ * We may get called with dev->iommu_fwspec set to NULL.
+ */
+ if (!fwspec || !fwspec->iommu_priv)
+ return -ENODEV;
+
+ group = iommu_group_get_for_dev(dev);
+ if (IS_ERR(group))
+ return PTR_ERR(group);
+
+ spin_lock(&ipmmu_slave_devices_lock);
+ list_add(&to_priv(dev)->list, &ipmmu_slave_devices);
+ spin_unlock(&ipmmu_slave_devices_lock);
+ return 0;
+}
+
+static void ipmmu_remove_device_dma(struct device *dev)
+{
+ struct ipmmu_vmsa_iommu_priv *priv = to_priv(dev);
+
+ spin_lock(&ipmmu_slave_devices_lock);
+ list_del(&priv->list);
+ spin_unlock(&ipmmu_slave_devices_lock);
+
+ iommu_group_remove_device(dev);
+}
+
+static struct device *ipmmu_find_sibling_device(struct device *dev)
+{
+ struct ipmmu_vmsa_iommu_priv *priv = to_priv(dev);
+ struct ipmmu_vmsa_iommu_priv *sibling_priv = NULL;
+ bool found = false;
+
+ spin_lock(&ipmmu_slave_devices_lock);
+
+ list_for_each_entry(sibling_priv, &ipmmu_slave_devices, list) {
+ if (priv == sibling_priv)
+ continue;
+ if (sibling_priv->mmu == priv->mmu) {
+ found = true;
+ break;
+ }
+ }
+
+ spin_unlock(&ipmmu_slave_devices_lock);
+
+ return found ? sibling_priv->dev : NULL;
+}
+
+static struct iommu_group *ipmmu_find_group_dma(struct device *dev)
+{
+ struct iommu_group *group;
+ struct device *sibling;
+
+ sibling = ipmmu_find_sibling_device(dev);
+ if (sibling)
+ group = iommu_group_get(sibling);
+ if (!sibling || IS_ERR(group))
+ group = generic_device_group(dev);
+
+ return group;
+}
+
+static int ipmmu_of_xlate_dma(struct device *dev,
+ struct of_phandle_args *spec)
+{
+ /* If the IPMMU device is disabled in DT then return error
+ * to make sure the of_iommu code does not install ops
+ * even though the iommu device is disabled
+ */
+ if (!of_device_is_available(spec->np))
+ return -ENODEV;
+
+ return ipmmu_init_platform_device(dev);
+}
+
+static const struct iommu_ops ipmmu_ops = {
+ .domain_alloc = ipmmu_domain_alloc_dma,
+ .domain_free = ipmmu_domain_free_dma,
+ .attach_dev = ipmmu_attach_device,
+ .detach_dev = ipmmu_detach_device,
+ .map = ipmmu_map,
+ .unmap = ipmmu_unmap,
+ .map_sg = default_iommu_map_sg,
+ .iova_to_phys = ipmmu_iova_to_phys,
+ .add_device = ipmmu_add_device_dma,
+ .remove_device = ipmmu_remove_device_dma,
+ .device_group = ipmmu_find_group_dma,
+ .pgsize_bitmap = SZ_1G | SZ_2M | SZ_4K,
+ .of_xlate = ipmmu_of_xlate_dma,
+};
+
+#endif /* CONFIG_IOMMU_DMA */
+
/* -----------------------------------------------------------------------------
* Probe/remove and init
*/
@@ -768,11 +1008,6 @@
int irq;
int ret;
- if (!IS_ENABLED(CONFIG_OF) && !pdev->dev.platform_data) {
- dev_err(&pdev->dev, "missing platform data\n");
- return -EINVAL;
- }
-
mmu = devm_kzalloc(&pdev->dev, sizeof(*mmu), GFP_KERNEL);
if (!mmu) {
dev_err(&pdev->dev, "cannot allocate device data\n");
@@ -781,6 +1016,8 @@
mmu->dev = &pdev->dev;
mmu->num_utlbs = 32;
+ spin_lock_init(&mmu->lock);
+ bitmap_zero(mmu->ctx, IPMMU_CTX_MAX);
/* Map I/O memory and request IRQ. */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -840,7 +1077,9 @@
list_del(&mmu->list);
spin_unlock(&ipmmu_devices_lock);
+#if defined(CONFIG_ARM) && !defined(CONFIG_IOMMU_DMA)
arm_iommu_release_mapping(mmu->mapping);
+#endif
ipmmu_device_reset(mmu);
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 5d14cd1..91c6d36 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -129,6 +129,7 @@
writel_relaxed(iova, data->base + REG_MMU_INVLD_START_A);
writel_relaxed(iova + size - 1, data->base + REG_MMU_INVLD_END_A);
writel_relaxed(F_MMU_INV_RANGE, data->base + REG_MMU_INVALIDATE);
+ data->tlb_flush_active = true;
}
static void mtk_iommu_tlb_sync(void *cookie)
@@ -137,6 +138,10 @@
int ret;
u32 tmp;
+ /* Avoid timing out if there's nothing to wait for */
+ if (!data->tlb_flush_active)
+ return;
+
ret = readl_poll_timeout_atomic(data->base + REG_MMU_CPE_DONE, tmp,
tmp != 0, 10, 100000);
if (ret) {
@@ -146,6 +151,7 @@
}
/* Clear the CPE status */
writel_relaxed(0, data->base + REG_MMU_CPE_DONE);
+ data->tlb_flush_active = false;
}
static const struct iommu_gather_ops mtk_iommu_gather_ops = {
diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
index 2a28ead..c06cc91 100644
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h
@@ -47,6 +47,7 @@
struct iommu_group *m4u_group;
struct mtk_smi_iommu smi_imu; /* SMI larb iommu info */
bool enable_4GB;
+ bool tlb_flush_active;
struct iommu_device iommu;
};
diff --git a/drivers/iommu/omap-iommu.c b/drivers/iommu/omap-iommu.c
index 95dfca3..641e035 100644
--- a/drivers/iommu/omap-iommu.c
+++ b/drivers/iommu/omap-iommu.c
@@ -1309,7 +1309,7 @@
static struct iommu_group *omap_iommu_device_group(struct device *dev)
{
struct omap_iommu_arch_data *arch_data = dev->archdata.iommu;
- struct iommu_group *group = NULL;
+ struct iommu_group *group = ERR_PTR(-EINVAL);
if (arch_data->iommu_dev)
group = arch_data->iommu_dev->group;
diff --git a/drivers/iommu/s390-iommu.c b/drivers/iommu/s390-iommu.c
index 179e636..8788640 100644
--- a/drivers/iommu/s390-iommu.c
+++ b/drivers/iommu/s390-iommu.c
@@ -165,20 +165,14 @@
static int s390_iommu_add_device(struct device *dev)
{
- struct iommu_group *group;
- int rc;
+ struct iommu_group *group = iommu_group_get_for_dev(dev);
- group = iommu_group_get(dev);
- if (!group) {
- group = iommu_group_alloc();
- if (IS_ERR(group))
- return PTR_ERR(group);
- }
+ if (IS_ERR(group))
+ return PTR_ERR(group);
- rc = iommu_group_add_device(group, dev);
iommu_group_put(group);
- return rc;
+ return 0;
}
static void s390_iommu_remove_device(struct device *dev)
@@ -344,6 +338,7 @@
.iova_to_phys = s390_iommu_iova_to_phys,
.add_device = s390_iommu_add_device,
.remove_device = s390_iommu_remove_device,
+ .device_group = generic_device_group,
.pgsize_bitmap = S390_IOMMU_PGSIZES,
};
diff --git a/drivers/irqchip/irq-digicolor.c b/drivers/irqchip/irq-digicolor.c
index dad85e7..3aae015 100644
--- a/drivers/irqchip/irq-digicolor.c
+++ b/drivers/irqchip/irq-digicolor.c
@@ -71,7 +71,7 @@
static int __init digicolor_of_init(struct device_node *node,
struct device_node *parent)
{
- static void __iomem *reg_base;
+ void __iomem *reg_base;
unsigned int clr = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;
struct regmap *ucregs;
int ret;
diff --git a/drivers/irqchip/irq-gic-realview.c b/drivers/irqchip/irq-gic-realview.c
index 54c2964..18d58d2 100644
--- a/drivers/irqchip/irq-gic-realview.c
+++ b/drivers/irqchip/irq-gic-realview.c
@@ -43,7 +43,7 @@
static int __init
realview_gic_of_init(struct device_node *node, struct device_node *parent)
{
- static struct regmap *map;
+ struct regmap *map;
struct device_node *np;
const struct of_device_id *gic_id;
u32 pld1_ctrl;
diff --git a/drivers/irqchip/irq-mips-cpu.c b/drivers/irqchip/irq-mips-cpu.c
index 0a8ed1c..14461cb 100644
--- a/drivers/irqchip/irq-mips-cpu.c
+++ b/drivers/irqchip/irq-mips-cpu.c
@@ -154,7 +154,7 @@
static int mips_cpu_intc_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hw)
{
- static struct irq_chip *chip;
+ struct irq_chip *chip;
if (hw < 2 && cpu_has_mipsmt) {
/* Software interrupts are used for MT/CMT IPI */
diff --git a/drivers/irqchip/irq-mips-gic.c b/drivers/irqchip/irq-mips-gic.c
index 832ebf40..6ab1d3a 100644
--- a/drivers/irqchip/irq-mips-gic.c
+++ b/drivers/irqchip/irq-mips-gic.c
@@ -950,7 +950,6 @@
&gic_irq_domain_ops, NULL);
if (!gic_irq_domain)
panic("Failed to add GIC IRQ domain");
- gic_irq_domain->name = "mips-gic-irq";
gic_ipi_domain = irq_domain_add_hierarchy(gic_irq_domain,
IRQ_DOMAIN_FLAG_IPI_PER_CPU,
@@ -959,7 +958,6 @@
if (!gic_ipi_domain)
panic("Failed to add GIC IPI domain");
- gic_ipi_domain->name = "mips-gic-ipi";
irq_domain_update_bus_token(gic_ipi_domain, DOMAIN_BUS_IPI);
if (node &&
diff --git a/drivers/isdn/divert/isdn_divert.c b/drivers/isdn/divert/isdn_divert.c
index 060d357..6f423bc 100644
--- a/drivers/isdn/divert/isdn_divert.c
+++ b/drivers/isdn/divert/isdn_divert.c
@@ -485,18 +485,19 @@
cs->deflect_dest[0] = '\0';
retval = 4; /* only proceed */
}
- sprintf(cs->info, "%d 0x%lx %s %s %s %s 0x%x 0x%x %d %d %s\n",
- cs->akt_state,
- cs->divert_id,
- divert_if.drv_to_name(cs->ics.driver),
- (ic->command == ISDN_STAT_ICALLW) ? "1" : "0",
- cs->ics.parm.setup.phone,
- cs->ics.parm.setup.eazmsn,
- cs->ics.parm.setup.si1,
- cs->ics.parm.setup.si2,
- cs->ics.parm.setup.screen,
- dv->rule.waittime,
- cs->deflect_dest);
+ snprintf(cs->info, sizeof(cs->info),
+ "%d 0x%lx %s %s %s %s 0x%x 0x%x %d %d %s\n",
+ cs->akt_state,
+ cs->divert_id,
+ divert_if.drv_to_name(cs->ics.driver),
+ (ic->command == ISDN_STAT_ICALLW) ? "1" : "0",
+ cs->ics.parm.setup.phone,
+ cs->ics.parm.setup.eazmsn,
+ cs->ics.parm.setup.si1,
+ cs->ics.parm.setup.si2,
+ cs->ics.parm.setup.screen,
+ dv->rule.waittime,
+ cs->deflect_dest);
if ((dv->rule.action == DEFLECT_REPORT) ||
(dv->rule.action == DEFLECT_REJECT)) {
put_info_buffer(cs->info);
diff --git a/drivers/isdn/hardware/avm/c4.c b/drivers/isdn/hardware/avm/c4.c
index 40c7e2c..034caba 100644
--- a/drivers/isdn/hardware/avm/c4.c
+++ b/drivers/isdn/hardware/avm/c4.c
@@ -42,7 +42,7 @@
static bool suppress_pollack;
-static struct pci_device_id c4_pci_tbl[] = {
+static const struct pci_device_id c4_pci_tbl[] = {
{ PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21285, PCI_VENDOR_ID_AVM, PCI_DEVICE_ID_AVM_C4, 0, 0, (unsigned long)4 },
{ PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21285, PCI_VENDOR_ID_AVM, PCI_DEVICE_ID_AVM_C2, 0, 0, (unsigned long)2 },
{ } /* Terminating entry */
diff --git a/drivers/isdn/hardware/eicon/divasmain.c b/drivers/isdn/hardware/eicon/divasmain.c
index 8b7ad4f..b2023e0 100644
--- a/drivers/isdn/hardware/eicon/divasmain.c
+++ b/drivers/isdn/hardware/eicon/divasmain.c
@@ -110,7 +110,7 @@
/*
This table should be sorted by PCI device ID
*/
-static struct pci_device_id divas_pci_tbl[] = {
+static const struct pci_device_id divas_pci_tbl[] = {
/* Diva Server BRI-2M PCI 0xE010 */
{ PCI_VDEVICE(EICON, PCI_DEVICE_ID_EICON_MAESTRA),
CARDTYPE_MAESTRA_PCI },
diff --git a/drivers/isdn/hardware/mISDN/avmfritz.c b/drivers/isdn/hardware/mISDN/avmfritz.c
index e3fa1cd..dce6632 100644
--- a/drivers/isdn/hardware/mISDN/avmfritz.c
+++ b/drivers/isdn/hardware/mISDN/avmfritz.c
@@ -1142,7 +1142,7 @@
pr_info("%s: drvdata already removed\n", __func__);
}
-static struct pci_device_id fcpci_ids[] = {
+static const struct pci_device_id fcpci_ids[] = {
{ PCI_VENDOR_ID_AVM, PCI_DEVICE_ID_AVM_A1, PCI_ANY_ID, PCI_ANY_ID,
0, 0, (unsigned long) "Fritz!Card PCI"},
{ PCI_VENDOR_ID_AVM, PCI_DEVICE_ID_AVM_A1_V2, PCI_ANY_ID, PCI_ANY_ID,
diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c
index aea0c96..3cf07b8 100644
--- a/drivers/isdn/hardware/mISDN/hfcmulti.c
+++ b/drivers/isdn/hardware/mISDN/hfcmulti.c
@@ -5348,7 +5348,7 @@
#undef H
#define H(x) ((unsigned long)&hfcm_map[x])
-static struct pci_device_id hfmultipci_ids[] = {
+static const struct pci_device_id hfmultipci_ids[] = {
/* Cards with HFC-4S Chip */
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
diff --git a/drivers/isdn/hardware/mISDN/hfcpci.c b/drivers/isdn/hardware/mISDN/hfcpci.c
index 5dc246d..d2e401a 100644
--- a/drivers/isdn/hardware/mISDN/hfcpci.c
+++ b/drivers/isdn/hardware/mISDN/hfcpci.c
@@ -2161,7 +2161,7 @@
{},
};
-static struct pci_device_id hfc_ids[] =
+static const struct pci_device_id hfc_ids[] =
{
{ PCI_VDEVICE(CCD, PCI_DEVICE_ID_CCD_2BD0),
(unsigned long) &hfc_map[0] },
diff --git a/drivers/isdn/hardware/mISDN/netjet.c b/drivers/isdn/hardware/mISDN/netjet.c
index afde4ed..6a6d848 100644
--- a/drivers/isdn/hardware/mISDN/netjet.c
+++ b/drivers/isdn/hardware/mISDN/netjet.c
@@ -1137,7 +1137,7 @@
/* We cannot select cards with PCI_SUB... IDs, since here are cards with
* SUB IDs set to PCI_ANY_ID, so we need to match all and reject
* known other cards which not work with this driver - see probe function */
-static struct pci_device_id nj_pci_ids[] = {
+static const struct pci_device_id nj_pci_ids[] = {
{ PCI_VENDOR_ID_TIGERJET, PCI_DEVICE_ID_TIGERJET_300,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ }
diff --git a/drivers/isdn/hardware/mISDN/w6692.c b/drivers/isdn/hardware/mISDN/w6692.c
index 3052c83..d80072f 100644
--- a/drivers/isdn/hardware/mISDN/w6692.c
+++ b/drivers/isdn/hardware/mISDN/w6692.c
@@ -1398,7 +1398,7 @@
pr_notice("%s: drvdata already removed\n", __func__);
}
-static struct pci_device_id w6692_ids[] = {
+static const struct pci_device_id w6692_ids[] = {
{ PCI_VENDOR_ID_DYNALINK, PCI_DEVICE_ID_DYNALINK_IS64PH,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, (ulong)&w6692_map[0]},
{ PCI_VENDOR_ID_WINBOND2, PCI_DEVICE_ID_WINBOND2_6692,
diff --git a/drivers/isdn/hisax/config.c b/drivers/isdn/hisax/config.c
index c7d6867..7108bdb8 100644
--- a/drivers/isdn/hisax/config.c
+++ b/drivers/isdn/hisax/config.c
@@ -1909,7 +1909,7 @@
#ifdef CONFIG_PCI
#include <linux/pci.h>
-static struct pci_device_id hisax_pci_tbl[] __used = {
+static const struct pci_device_id hisax_pci_tbl[] __used = {
#ifdef CONFIG_HISAX_FRITZPCI
{PCI_VDEVICE(AVM, PCI_DEVICE_ID_AVM_A1) },
#endif
diff --git a/drivers/isdn/hisax/hfc4s8s_l1.c b/drivers/isdn/hisax/hfc4s8s_l1.c
index 90f051c..9090cc1 100644
--- a/drivers/isdn/hisax/hfc4s8s_l1.c
+++ b/drivers/isdn/hisax/hfc4s8s_l1.c
@@ -86,7 +86,7 @@
char *device_name;
} hfc4s8s_param;
-static struct pci_device_id hfc4s8s_ids[] = {
+static const struct pci_device_id hfc4s8s_ids[] = {
{.vendor = PCI_VENDOR_ID_CCD,
.device = PCI_DEVICE_ID_4S,
.subvendor = 0x1397,
diff --git a/drivers/isdn/hisax/hisax_fcpcipnp.c b/drivers/isdn/hisax/hisax_fcpcipnp.c
index 5a9f39e..e4f7573 100644
--- a/drivers/isdn/hisax/hisax_fcpcipnp.c
+++ b/drivers/isdn/hisax/hisax_fcpcipnp.c
@@ -52,7 +52,7 @@
MODULE_AUTHOR("Kai Germaschewski <kai.germaschewski@gmx.de>/Karsten Keil <kkeil@suse.de>");
MODULE_DESCRIPTION("AVM Fritz!PCI/PnP ISDN driver");
-static struct pci_device_id fcpci_ids[] = {
+static const struct pci_device_id fcpci_ids[] = {
{ .vendor = PCI_VENDOR_ID_AVM,
.device = PCI_DEVICE_ID_AVM_A1,
.subvendor = PCI_ANY_ID,
diff --git a/drivers/isdn/i4l/isdn_common.c b/drivers/isdn/i4l/isdn_common.c
index 89b09c5..38a5bb7 100644
--- a/drivers/isdn/i4l/isdn_common.c
+++ b/drivers/isdn/i4l/isdn_common.c
@@ -1376,6 +1376,7 @@
if (arg) {
if (copy_from_user(bname, argp, sizeof(bname) - 1))
return -EFAULT;
+ bname[sizeof(bname)-1] = 0;
} else
return -EINVAL;
ret = mutex_lock_interruptible(&dev->mtx);
diff --git a/drivers/isdn/i4l/isdn_net.c b/drivers/isdn/i4l/isdn_net.c
index c151c6d..f63a110 100644
--- a/drivers/isdn/i4l/isdn_net.c
+++ b/drivers/isdn/i4l/isdn_net.c
@@ -2611,10 +2611,9 @@
char newname[10];
if (p) {
- /* Slave-Name MUST not be empty */
- if (!strlen(p + 1))
+ /* Slave-Name MUST not be empty or overflow 'newname' */
+ if (strscpy(newname, p + 1, sizeof(newname)) <= 0)
return NULL;
- strcpy(newname, p + 1);
*p = 0;
/* Master must already exist */
if (!(n = isdn_net_findif(parm)))
diff --git a/drivers/lightnvm/pblk-rb.c b/drivers/lightnvm/pblk-rb.c
index 5ecc154..9bc3257 100644
--- a/drivers/lightnvm/pblk-rb.c
+++ b/drivers/lightnvm/pblk-rb.c
@@ -657,7 +657,7 @@
* be directed to disk.
*/
int pblk_rb_copy_to_bio(struct pblk_rb *rb, struct bio *bio, sector_t lba,
- struct ppa_addr ppa, int bio_iter)
+ struct ppa_addr ppa, int bio_iter, bool advanced_bio)
{
struct pblk *pblk = container_of(rb, struct pblk, rwb);
struct pblk_rb_entry *entry;
@@ -694,7 +694,7 @@
* filled with data from the cache). If part of the data resides on the
* media, we will read later on
*/
- if (unlikely(!bio->bi_iter.bi_idx))
+ if (unlikely(!advanced_bio))
bio_advance(bio, bio_iter * PBLK_EXPOSED_PAGE_SIZE);
data = bio_data(bio);
diff --git a/drivers/lightnvm/pblk-read.c b/drivers/lightnvm/pblk-read.c
index 4e5c48f..d682e89 100644
--- a/drivers/lightnvm/pblk-read.c
+++ b/drivers/lightnvm/pblk-read.c
@@ -26,7 +26,7 @@
*/
static int pblk_read_from_cache(struct pblk *pblk, struct bio *bio,
sector_t lba, struct ppa_addr ppa,
- int bio_iter)
+ int bio_iter, bool advanced_bio)
{
#ifdef CONFIG_NVM_DEBUG
/* Callers must ensure that the ppa points to a cache address */
@@ -34,7 +34,8 @@
BUG_ON(!pblk_addr_in_cache(ppa));
#endif
- return pblk_rb_copy_to_bio(&pblk->rwb, bio, lba, ppa, bio_iter);
+ return pblk_rb_copy_to_bio(&pblk->rwb, bio, lba, ppa,
+ bio_iter, advanced_bio);
}
static void pblk_read_ppalist_rq(struct pblk *pblk, struct nvm_rq *rqd,
@@ -44,7 +45,7 @@
struct ppa_addr ppas[PBLK_MAX_REQ_ADDRS];
sector_t blba = pblk_get_lba(bio);
int nr_secs = rqd->nr_ppas;
- int advanced_bio = 0;
+ bool advanced_bio = false;
int i, j = 0;
/* logic error: lba out-of-bounds. Ignore read request */
@@ -62,19 +63,26 @@
retry:
if (pblk_ppa_empty(p)) {
WARN_ON(test_and_set_bit(i, read_bitmap));
- continue;
+
+ if (unlikely(!advanced_bio)) {
+ bio_advance(bio, (i) * PBLK_EXPOSED_PAGE_SIZE);
+ advanced_bio = true;
+ }
+
+ goto next;
}
/* Try to read from write buffer. The address is later checked
* on the write buffer to prevent retrieving overwritten data.
*/
if (pblk_addr_in_cache(p)) {
- if (!pblk_read_from_cache(pblk, bio, lba, p, i)) {
+ if (!pblk_read_from_cache(pblk, bio, lba, p, i,
+ advanced_bio)) {
pblk_lookup_l2p_seq(pblk, &p, lba, 1);
goto retry;
}
WARN_ON(test_and_set_bit(i, read_bitmap));
- advanced_bio = 1;
+ advanced_bio = true;
#ifdef CONFIG_NVM_DEBUG
atomic_long_inc(&pblk->cache_reads);
#endif
@@ -83,6 +91,7 @@
rqd->ppa_list[j++] = p;
}
+next:
if (advanced_bio)
bio_advance(bio, PBLK_EXPOSED_PAGE_SIZE);
}
@@ -282,7 +291,7 @@
* write buffer to prevent retrieving overwritten data.
*/
if (pblk_addr_in_cache(ppa)) {
- if (!pblk_read_from_cache(pblk, bio, lba, ppa, 0)) {
+ if (!pblk_read_from_cache(pblk, bio, lba, ppa, 0, 1)) {
pblk_lookup_l2p_seq(pblk, &ppa, lba, 1);
goto retry;
}
diff --git a/drivers/lightnvm/pblk.h b/drivers/lightnvm/pblk.h
index 0c5692c..67e623b 100644
--- a/drivers/lightnvm/pblk.h
+++ b/drivers/lightnvm/pblk.h
@@ -670,7 +670,7 @@
struct list_head *list,
unsigned int max);
int pblk_rb_copy_to_bio(struct pblk_rb *rb, struct bio *bio, sector_t lba,
- struct ppa_addr ppa, int bio_iter);
+ struct ppa_addr ppa, int bio_iter, bool advanced_bio);
unsigned int pblk_rb_read_commit(struct pblk_rb *rb, unsigned int entries);
unsigned int pblk_rb_sync_init(struct pblk_rb *rb, unsigned long *flags);
diff --git a/drivers/mailbox/pcc.c b/drivers/mailbox/pcc.c
index ac91fd0..cbca5e5 100644
--- a/drivers/mailbox/pcc.c
+++ b/drivers/mailbox/pcc.c
@@ -92,7 +92,7 @@
*/
static struct mbox_chan *get_pcc_channel(int id)
{
- if (id < 0 || id > pcc_mbox_ctrl.num_chans)
+ if (id < 0 || id >= pcc_mbox_ctrl.num_chans)
return ERR_PTR(-ENOENT);
return &pcc_mbox_channels[id];
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index f4eace5..40f3cd7 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -156,7 +156,8 @@
rdev_for_each(rdev, mddev) {
if (! test_bit(In_sync, &rdev->flags)
- || test_bit(Faulty, &rdev->flags))
+ || test_bit(Faulty, &rdev->flags)
+ || test_bit(Bitmap_sync, &rdev->flags))
continue;
target = offset + index * (PAGE_SIZE/512);
diff --git a/drivers/md/dm-bufio.c b/drivers/md/dm-bufio.c
index 850ff6c..44f4a8a 100644
--- a/drivers/md/dm-bufio.c
+++ b/drivers/md/dm-bufio.c
@@ -1258,8 +1258,7 @@
*/
int dm_bufio_write_dirty_buffers(struct dm_bufio_client *c)
{
- blk_status_t a;
- int f;
+ int a, f;
unsigned long buffers_processed = 0;
struct dm_buffer *b, *tmp;
diff --git a/drivers/md/dm-integrity.c b/drivers/md/dm-integrity.c
index 1b224aa..3acce09 100644
--- a/drivers/md/dm-integrity.c
+++ b/drivers/md/dm-integrity.c
@@ -1587,16 +1587,18 @@
if (likely(ic->mode == 'J')) {
if (dio->write) {
unsigned next_entry, i, pos;
- unsigned ws, we;
+ unsigned ws, we, range_sectors;
- dio->range.n_sectors = min(dio->range.n_sectors, ic->free_sectors);
+ dio->range.n_sectors = min(dio->range.n_sectors,
+ ic->free_sectors << ic->sb->log2_sectors_per_block);
if (unlikely(!dio->range.n_sectors))
goto sleep;
- ic->free_sectors -= dio->range.n_sectors;
+ range_sectors = dio->range.n_sectors >> ic->sb->log2_sectors_per_block;
+ ic->free_sectors -= range_sectors;
journal_section = ic->free_section;
journal_entry = ic->free_section_entry;
- next_entry = ic->free_section_entry + dio->range.n_sectors;
+ next_entry = ic->free_section_entry + range_sectors;
ic->free_section_entry = next_entry % ic->journal_section_entries;
ic->free_section += next_entry / ic->journal_section_entries;
ic->n_uncommitted_sections += next_entry / ic->journal_section_entries;
@@ -1727,6 +1729,8 @@
wraparound_section(ic, &ic->free_section);
ic->n_uncommitted_sections++;
}
+ WARN_ON(ic->journal_sections * ic->journal_section_entries !=
+ (ic->n_uncommitted_sections + ic->n_committed_sections) * ic->journal_section_entries + ic->free_sectors);
}
static void integrity_commit(struct work_struct *w)
@@ -1821,6 +1825,9 @@
{
unsigned i, j, n;
struct journal_completion comp;
+ struct blk_plug plug;
+
+ blk_start_plug(&plug);
comp.ic = ic;
comp.in_flight = (atomic_t)ATOMIC_INIT(1);
@@ -1945,6 +1952,8 @@
dm_bufio_write_dirty_buffers_async(ic->bufio);
+ blk_finish_plug(&plug);
+
complete_journal_op(&comp);
wait_for_completion_io(&comp.comp);
@@ -3019,6 +3028,11 @@
ti->error = "Block size doesn't match the information in superblock";
goto bad;
}
+ if (!le32_to_cpu(ic->sb->journal_sections)) {
+ r = -EINVAL;
+ ti->error = "Corrupted superblock, journal_sections is 0";
+ goto bad;
+ }
/* make sure that ti->max_io_len doesn't overflow */
if (ic->sb->log2_interleave_sectors < MIN_LOG2_INTERLEAVE_SECTORS ||
ic->sb->log2_interleave_sectors > MAX_LOG2_INTERLEAVE_SECTORS) {
diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c
index 2e10c2f..5bfe285 100644
--- a/drivers/md/dm-raid.c
+++ b/drivers/md/dm-raid.c
@@ -208,6 +208,7 @@
#define RT_FLAG_RS_BITMAP_LOADED 2
#define RT_FLAG_UPDATE_SBS 3
#define RT_FLAG_RESHAPE_RS 4
+#define RT_FLAG_RS_SUSPENDED 5
/* Array elements of 64 bit needed for rebuild/failed disk bits */
#define DISKS_ARRAY_ELEMS ((MAX_RAID_DEVICES + (sizeof(uint64_t) * 8 - 1)) / sizeof(uint64_t) / 8)
@@ -564,9 +565,10 @@
if (__raid10_near_copies(layout) > 1)
return "near";
- WARN_ON(__raid10_far_copies(layout) < 2);
+ if (__raid10_far_copies(layout) > 1)
+ return "far";
- return "far";
+ return "unknown";
}
/* Return md raid10 algorithm for @name */
@@ -2540,11 +2542,6 @@
if (!freshest)
return 0;
- if (validate_raid_redundancy(rs)) {
- rs->ti->error = "Insufficient redundancy to activate array";
- return -EINVAL;
- }
-
/*
* Validation of the freshest device provides the source of
* validation for the remaining devices.
@@ -2553,6 +2550,11 @@
if (super_validate(rs, freshest))
return -EINVAL;
+ if (validate_raid_redundancy(rs)) {
+ rs->ti->error = "Insufficient redundancy to activate array";
+ return -EINVAL;
+ }
+
rdev_for_each(rdev, mddev)
if (!test_bit(Journal, &rdev->flags) &&
rdev != freshest &&
@@ -3168,6 +3170,7 @@
}
mddev_suspend(&rs->md);
+ set_bit(RT_FLAG_RS_SUSPENDED, &rs->runtime_flags);
/* Try to adjust the raid4/5/6 stripe cache size to the stripe size */
if (rs_is_raid456(rs)) {
@@ -3625,7 +3628,7 @@
{
struct raid_set *rs = ti->private;
- if (!rs->md.suspended)
+ if (!test_and_set_bit(RT_FLAG_RS_SUSPENDED, &rs->runtime_flags))
mddev_suspend(&rs->md);
rs->md.ro = 1;
@@ -3759,7 +3762,7 @@
return r;
/* Need to be resumed to be able to start reshape, recovery is frozen until raid_resume() though */
- if (mddev->suspended)
+ if (test_and_clear_bit(RT_FLAG_RS_SUSPENDED, &rs->runtime_flags))
mddev_resume(mddev);
/*
@@ -3786,8 +3789,8 @@
}
/* Suspend because a resume will happen in raid_resume() */
- if (!mddev->suspended)
- mddev_suspend(mddev);
+ set_bit(RT_FLAG_RS_SUSPENDED, &rs->runtime_flags);
+ mddev_suspend(mddev);
/*
* Now reshape got set up, update superblocks to
@@ -3883,13 +3886,13 @@
if (!(rs->ctr_flags & RESUME_STAY_FROZEN_FLAGS))
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
- if (mddev->suspended)
+ if (test_and_clear_bit(RT_FLAG_RS_SUSPENDED, &rs->runtime_flags))
mddev_resume(mddev);
}
static struct target_type raid_target = {
.name = "raid",
- .version = {1, 11, 1},
+ .version = {1, 12, 1},
.module = THIS_MODULE,
.ctr = raid_ctr,
.dtr = raid_dtr,
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index a39bcd9..28a4071 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -20,6 +20,7 @@
#include <linux/atomic.h>
#include <linux/blk-mq.h>
#include <linux/mount.h>
+#include <linux/dax.h>
#define DM_MSG_PREFIX "table"
@@ -1630,6 +1631,37 @@
return false;
}
+static int device_dax_write_cache_enabled(struct dm_target *ti,
+ struct dm_dev *dev, sector_t start,
+ sector_t len, void *data)
+{
+ struct dax_device *dax_dev = dev->dax_dev;
+
+ if (!dax_dev)
+ return false;
+
+ if (dax_write_cache_enabled(dax_dev))
+ return true;
+ return false;
+}
+
+static int dm_table_supports_dax_write_cache(struct dm_table *t)
+{
+ struct dm_target *ti;
+ unsigned i;
+
+ for (i = 0; i < dm_table_get_num_targets(t); i++) {
+ ti = dm_table_get_target(t, i);
+
+ if (ti->type->iterate_devices &&
+ ti->type->iterate_devices(ti,
+ device_dax_write_cache_enabled, NULL))
+ return true;
+ }
+
+ return false;
+}
+
static int device_is_nonrot(struct dm_target *ti, struct dm_dev *dev,
sector_t start, sector_t len, void *data)
{
@@ -1785,6 +1817,9 @@
}
blk_queue_write_cache(q, wc, fua);
+ if (dm_table_supports_dax_write_cache(t))
+ dax_write_cache(t->md->dax_dev, true);
+
/* Ensure that all underlying devices are non-rotational. */
if (dm_table_all_devices_attribute(t, device_is_nonrot))
queue_flag_set_unlocked(QUEUE_FLAG_NONROT, q);
diff --git a/drivers/md/dm-verity-fec.c b/drivers/md/dm-verity-fec.c
index 504ba3f..e13f908 100644
--- a/drivers/md/dm-verity-fec.c
+++ b/drivers/md/dm-verity-fec.c
@@ -308,19 +308,14 @@
{
unsigned n;
- if (!fio->rs) {
- fio->rs = mempool_alloc(v->fec->rs_pool, 0);
- if (unlikely(!fio->rs)) {
- DMERR("failed to allocate RS");
- return -ENOMEM;
- }
- }
+ if (!fio->rs)
+ fio->rs = mempool_alloc(v->fec->rs_pool, GFP_NOIO);
fec_for_each_prealloc_buffer(n) {
if (fio->bufs[n])
continue;
- fio->bufs[n] = mempool_alloc(v->fec->prealloc_pool, GFP_NOIO);
+ fio->bufs[n] = mempool_alloc(v->fec->prealloc_pool, GFP_NOWAIT);
if (unlikely(!fio->bufs[n])) {
DMERR("failed to allocate FEC buffer");
return -ENOMEM;
@@ -332,22 +327,16 @@
if (fio->bufs[n])
continue;
- fio->bufs[n] = mempool_alloc(v->fec->extra_pool, GFP_NOIO);
+ fio->bufs[n] = mempool_alloc(v->fec->extra_pool, GFP_NOWAIT);
/* we can manage with even one buffer if necessary */
if (unlikely(!fio->bufs[n]))
break;
}
fio->nbufs = n;
- if (!fio->output) {
+ if (!fio->output)
fio->output = mempool_alloc(v->fec->output_pool, GFP_NOIO);
- if (!fio->output) {
- DMERR("failed to allocate FEC page");
- return -ENOMEM;
- }
- }
-
return 0;
}
diff --git a/drivers/md/dm-zoned-metadata.c b/drivers/md/dm-zoned-metadata.c
index 884ff7c..a4fa2ad 100644
--- a/drivers/md/dm-zoned-metadata.c
+++ b/drivers/md/dm-zoned-metadata.c
@@ -624,7 +624,7 @@
ret = dmz_rdwr_block(zmd, REQ_OP_WRITE, block, mblk->page);
if (ret == 0)
- ret = blkdev_issue_flush(zmd->dev->bdev, GFP_KERNEL, NULL);
+ ret = blkdev_issue_flush(zmd->dev->bdev, GFP_NOIO, NULL);
return ret;
}
@@ -658,7 +658,7 @@
/* Flush drive cache (this will also sync data) */
if (ret == 0)
- ret = blkdev_issue_flush(zmd->dev->bdev, GFP_KERNEL, NULL);
+ ret = blkdev_issue_flush(zmd->dev->bdev, GFP_NOIO, NULL);
return ret;
}
@@ -722,7 +722,7 @@
/* If there are no dirty metadata blocks, just flush the device cache */
if (list_empty(&write_list)) {
- ret = blkdev_issue_flush(zmd->dev->bdev, GFP_KERNEL, NULL);
+ ret = blkdev_issue_flush(zmd->dev->bdev, GFP_NOIO, NULL);
goto out;
}
@@ -927,7 +927,7 @@
(zmd->nr_meta_zones << zmd->dev->zone_nr_blocks_shift);
}
- page = alloc_page(GFP_KERNEL);
+ page = alloc_page(GFP_NOIO);
if (!page)
return -ENOMEM;
@@ -1183,7 +1183,7 @@
/* Get zone information from disk */
ret = blkdev_report_zones(zmd->dev->bdev, dmz_start_sect(zmd, zone),
- &blkz, &nr_blkz, GFP_KERNEL);
+ &blkz, &nr_blkz, GFP_NOIO);
if (ret) {
dmz_dev_err(zmd->dev, "Get zone %u report failed",
dmz_id(zmd, zone));
@@ -1257,7 +1257,7 @@
ret = blkdev_reset_zones(dev->bdev,
dmz_start_sect(zmd, zone),
- dev->zone_nr_sectors, GFP_KERNEL);
+ dev->zone_nr_sectors, GFP_NOIO);
if (ret) {
dmz_dev_err(dev, "Reset zone %u failed %d",
dmz_id(zmd, zone), ret);
diff --git a/drivers/md/dm-zoned-reclaim.c b/drivers/md/dm-zoned-reclaim.c
index 05c0a12..44a119e1 100644
--- a/drivers/md/dm-zoned-reclaim.c
+++ b/drivers/md/dm-zoned-reclaim.c
@@ -75,7 +75,7 @@
nr_blocks = block - wp_block;
ret = blkdev_issue_zeroout(zrc->dev->bdev,
dmz_start_sect(zmd, zone) + dmz_blk2sect(wp_block),
- dmz_blk2sect(nr_blocks), GFP_NOFS, false);
+ dmz_blk2sect(nr_blocks), GFP_NOIO, 0);
if (ret) {
dmz_dev_err(zrc->dev,
"Align zone %u wp %llu to %llu (wp+%u) blocks failed %d",
diff --git a/drivers/md/dm-zoned-target.c b/drivers/md/dm-zoned-target.c
index 2b538fa..b08bbbd 100644
--- a/drivers/md/dm-zoned-target.c
+++ b/drivers/md/dm-zoned-target.c
@@ -541,7 +541,7 @@
int ret;
/* Create a new chunk work */
- cw = kmalloc(sizeof(struct dm_chunk_work), GFP_NOFS);
+ cw = kmalloc(sizeof(struct dm_chunk_work), GFP_NOIO);
if (!cw)
goto out;
@@ -588,7 +588,7 @@
bio->bi_bdev = dev->bdev;
- if (!nr_sectors && (bio_op(bio) != REQ_OP_FLUSH) && (bio_op(bio) != REQ_OP_WRITE))
+ if (!nr_sectors && bio_op(bio) != REQ_OP_WRITE)
return DM_MAPIO_REMAPPED;
/* The BIO should be block aligned */
@@ -603,7 +603,7 @@
bioctx->status = BLK_STS_OK;
/* Set the BIO pending in the flush list */
- if (bio_op(bio) == REQ_OP_FLUSH || (!nr_sectors && bio_op(bio) == REQ_OP_WRITE)) {
+ if (!nr_sectors && bio_op(bio) == REQ_OP_WRITE) {
spin_lock(&dmz->flush_lock);
bio_list_add(&dmz->flush_list, bio);
spin_unlock(&dmz->flush_lock);
@@ -785,7 +785,7 @@
/* Chunk BIO work */
mutex_init(&dmz->chunk_lock);
- INIT_RADIX_TREE(&dmz->chunk_rxtree, GFP_NOFS);
+ INIT_RADIX_TREE(&dmz->chunk_rxtree, GFP_KERNEL);
dmz->chunk_wq = alloc_workqueue("dmz_cwq_%s", WQ_MEM_RECLAIM | WQ_UNBOUND,
0, dev->name);
if (!dmz->chunk_wq) {
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 8cdca029..c996346 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -2287,7 +2287,7 @@
static bool set_in_sync(struct mddev *mddev)
{
- WARN_ON_ONCE(!spin_is_locked(&mddev->lock));
+ WARN_ON_ONCE(NR_CPUS != 1 && !spin_is_locked(&mddev->lock));
if (!mddev->in_sync) {
mddev->sync_checkers++;
spin_unlock(&mddev->lock);
diff --git a/drivers/md/md.h b/drivers/md/md.h
index 991f0fe..09db034 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -134,7 +134,9 @@
Faulty, /* device is known to have a fault */
In_sync, /* device is in_sync with rest of array */
Bitmap_sync, /* ..actually, not quite In_sync. Need a
- * bitmap-based recovery to get fully in sync
+ * bitmap-based recovery to get fully in sync.
+ * The bit is only meaningful before device
+ * has been passed to pers->hot_add_disk.
*/
WriteMostly, /* Avoid reading if at all possible */
AutoDetected, /* added by auto-detect */
@@ -729,58 +731,4 @@
!bdev_get_queue(bio->bi_bdev)->limits.max_write_zeroes_sectors)
mddev->queue->limits.max_write_zeroes_sectors = 0;
}
-
-/* Maximum size of each resync request */
-#define RESYNC_BLOCK_SIZE (64*1024)
-#define RESYNC_PAGES ((RESYNC_BLOCK_SIZE + PAGE_SIZE-1) / PAGE_SIZE)
-
-/* for managing resync I/O pages */
-struct resync_pages {
- unsigned idx; /* for get/put page from the pool */
- void *raid_bio;
- struct page *pages[RESYNC_PAGES];
-};
-
-static inline int resync_alloc_pages(struct resync_pages *rp,
- gfp_t gfp_flags)
-{
- int i;
-
- for (i = 0; i < RESYNC_PAGES; i++) {
- rp->pages[i] = alloc_page(gfp_flags);
- if (!rp->pages[i])
- goto out_free;
- }
-
- return 0;
-
-out_free:
- while (--i >= 0)
- put_page(rp->pages[i]);
- return -ENOMEM;
-}
-
-static inline void resync_free_pages(struct resync_pages *rp)
-{
- int i;
-
- for (i = 0; i < RESYNC_PAGES; i++)
- put_page(rp->pages[i]);
-}
-
-static inline void resync_get_all_pages(struct resync_pages *rp)
-{
- int i;
-
- for (i = 0; i < RESYNC_PAGES; i++)
- get_page(rp->pages[i]);
-}
-
-static inline struct page *resync_fetch_page(struct resync_pages *rp,
- unsigned idx)
-{
- if (WARN_ON_ONCE(idx >= RESYNC_PAGES))
- return NULL;
- return rp->pages[idx];
-}
#endif /* _MD_MD_H */
diff --git a/drivers/md/raid1-10.c b/drivers/md/raid1-10.c
new file mode 100644
index 0000000..9f2670b
--- /dev/null
+++ b/drivers/md/raid1-10.c
@@ -0,0 +1,81 @@
+/* Maximum size of each resync request */
+#define RESYNC_BLOCK_SIZE (64*1024)
+#define RESYNC_PAGES ((RESYNC_BLOCK_SIZE + PAGE_SIZE-1) / PAGE_SIZE)
+
+/* for managing resync I/O pages */
+struct resync_pages {
+ void *raid_bio;
+ struct page *pages[RESYNC_PAGES];
+};
+
+static inline int resync_alloc_pages(struct resync_pages *rp,
+ gfp_t gfp_flags)
+{
+ int i;
+
+ for (i = 0; i < RESYNC_PAGES; i++) {
+ rp->pages[i] = alloc_page(gfp_flags);
+ if (!rp->pages[i])
+ goto out_free;
+ }
+
+ return 0;
+
+out_free:
+ while (--i >= 0)
+ put_page(rp->pages[i]);
+ return -ENOMEM;
+}
+
+static inline void resync_free_pages(struct resync_pages *rp)
+{
+ int i;
+
+ for (i = 0; i < RESYNC_PAGES; i++)
+ put_page(rp->pages[i]);
+}
+
+static inline void resync_get_all_pages(struct resync_pages *rp)
+{
+ int i;
+
+ for (i = 0; i < RESYNC_PAGES; i++)
+ get_page(rp->pages[i]);
+}
+
+static inline struct page *resync_fetch_page(struct resync_pages *rp,
+ unsigned idx)
+{
+ if (WARN_ON_ONCE(idx >= RESYNC_PAGES))
+ return NULL;
+ return rp->pages[idx];
+}
+
+/*
+ * 'strct resync_pages' stores actual pages used for doing the resync
+ * IO, and it is per-bio, so make .bi_private points to it.
+ */
+static inline struct resync_pages *get_resync_pages(struct bio *bio)
+{
+ return bio->bi_private;
+}
+
+/* generally called after bio_reset() for reseting bvec */
+static void md_bio_reset_resync_pages(struct bio *bio, struct resync_pages *rp,
+ int size)
+{
+ int idx = 0;
+
+ /* initialize bvec table again */
+ do {
+ struct page *page = resync_fetch_page(rp, idx);
+ int len = min_t(int, size, PAGE_SIZE);
+
+ /*
+ * won't fail because the vec table is big
+ * enough to hold all these pages
+ */
+ bio_add_page(bio, page, len, 0);
+ size -= len;
+ } while (idx++ < RESYNC_PAGES && size > 0);
+}
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 3febfc83..f50958d 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -81,14 +81,7 @@
#define raid1_log(md, fmt, args...) \
do { if ((md)->queue) blk_add_trace_msg((md)->queue, "raid1 " fmt, ##args); } while (0)
-/*
- * 'strct resync_pages' stores actual pages used for doing the resync
- * IO, and it is per-bio, so make .bi_private points to it.
- */
-static inline struct resync_pages *get_resync_pages(struct bio *bio)
-{
- return bio->bi_private;
-}
+#include "raid1-10.c"
/*
* for resync bio, r1bio pointer can be retrieved from the per-bio
@@ -170,7 +163,6 @@
resync_get_all_pages(rp);
}
- rp->idx = 0;
rp->raid_bio = r1_bio;
bio->bi_private = rp;
}
@@ -492,10 +484,6 @@
}
if (behind) {
- /* we release behind master bio when all write are done */
- if (r1_bio->behind_master_bio == bio)
- to_put = NULL;
-
if (test_bit(WriteMostly, &rdev->flags))
atomic_dec(&r1_bio->behind_remaining);
@@ -802,8 +790,7 @@
bio->bi_next = NULL;
bio->bi_bdev = rdev->bdev;
if (test_bit(Faulty, &rdev->flags)) {
- bio->bi_status = BLK_STS_IOERR;
- bio_endio(bio);
+ bio_io_error(bio);
} else if (unlikely((bio_op(bio) == REQ_OP_DISCARD) &&
!blk_queue_discard(bdev_get_queue(bio->bi_bdev))))
/* Just ignore it */
@@ -1088,7 +1075,7 @@
wake_up(&conf->wait_barrier);
}
-static struct bio *alloc_behind_master_bio(struct r1bio *r1_bio,
+static void alloc_behind_master_bio(struct r1bio *r1_bio,
struct bio *bio)
{
int size = bio->bi_iter.bi_size;
@@ -1098,11 +1085,13 @@
behind_bio = bio_alloc_mddev(GFP_NOIO, vcnt, r1_bio->mddev);
if (!behind_bio)
- goto fail;
+ return;
/* discard op, we don't support writezero/writesame yet */
- if (!bio_has_data(bio))
+ if (!bio_has_data(bio)) {
+ behind_bio->bi_iter.bi_size = size;
goto skip_copy;
+ }
while (i < vcnt && size) {
struct page *page;
@@ -1123,14 +1112,13 @@
r1_bio->behind_master_bio = behind_bio;;
set_bit(R1BIO_BehindIO, &r1_bio->state);
- return behind_bio;
+ return;
free_pages:
pr_debug("%dB behind alloc failed, doing sync I/O\n",
bio->bi_iter.bi_size);
bio_free_pages(behind_bio);
-fail:
- return behind_bio;
+ bio_put(behind_bio);
}
struct raid1_plug_cb {
@@ -1483,7 +1471,7 @@
(atomic_read(&bitmap->behind_writes)
< mddev->bitmap_info.max_write_behind) &&
!waitqueue_active(&bitmap->behind_wait)) {
- mbio = alloc_behind_master_bio(r1_bio, bio);
+ alloc_behind_master_bio(r1_bio, bio);
}
bitmap_startwrite(bitmap, r1_bio->sector,
@@ -1493,14 +1481,11 @@
first_clone = 0;
}
- if (!mbio) {
- if (r1_bio->behind_master_bio)
- mbio = bio_clone_fast(r1_bio->behind_master_bio,
- GFP_NOIO,
- mddev->bio_set);
- else
- mbio = bio_clone_fast(bio, GFP_NOIO, mddev->bio_set);
- }
+ if (r1_bio->behind_master_bio)
+ mbio = bio_clone_fast(r1_bio->behind_master_bio,
+ GFP_NOIO, mddev->bio_set);
+ else
+ mbio = bio_clone_fast(bio, GFP_NOIO, mddev->bio_set);
if (r1_bio->behind_master_bio) {
if (test_bit(WriteMostly, &conf->mirrors[i].rdev->flags))
@@ -2086,10 +2071,7 @@
/* Fix variable parts of all bios */
vcnt = (r1_bio->sectors + PAGE_SIZE / 512 - 1) >> (PAGE_SHIFT - 9);
for (i = 0; i < conf->raid_disks * 2; i++) {
- int j;
- int size;
blk_status_t status;
- struct bio_vec *bi;
struct bio *b = r1_bio->bios[i];
struct resync_pages *rp = get_resync_pages(b);
if (b->bi_end_io != end_sync_read)
@@ -2098,8 +2080,6 @@
status = b->bi_status;
bio_reset(b);
b->bi_status = status;
- b->bi_vcnt = vcnt;
- b->bi_iter.bi_size = r1_bio->sectors << 9;
b->bi_iter.bi_sector = r1_bio->sector +
conf->mirrors[i].rdev->data_offset;
b->bi_bdev = conf->mirrors[i].rdev->bdev;
@@ -2107,15 +2087,8 @@
rp->raid_bio = r1_bio;
b->bi_private = rp;
- size = b->bi_iter.bi_size;
- bio_for_each_segment_all(bi, b, j) {
- bi->bv_offset = 0;
- if (size > PAGE_SIZE)
- bi->bv_len = PAGE_SIZE;
- else
- bi->bv_len = size;
- size -= PAGE_SIZE;
- }
+ /* initialize bvec table again */
+ md_bio_reset_resync_pages(b, rp, r1_bio->sectors << 9);
}
for (primary = 0; primary < conf->raid_disks * 2; primary++)
if (r1_bio->bios[primary]->bi_end_io == end_sync_read &&
@@ -2366,8 +2339,6 @@
wbio = bio_clone_fast(r1_bio->behind_master_bio,
GFP_NOIO,
mddev->bio_set);
- /* We really need a _all clone */
- wbio->bi_iter = (struct bvec_iter){ 0 };
} else {
wbio = bio_clone_fast(r1_bio->master_bio, GFP_NOIO,
mddev->bio_set);
@@ -2619,6 +2590,7 @@
int good_sectors = RESYNC_SECTORS;
int min_bad = 0; /* number of sectors that are bad in all devices */
int idx = sector_to_idx(sector_nr);
+ int page_idx = 0;
if (!conf->r1buf_pool)
if (init_resync(conf))
@@ -2846,7 +2818,7 @@
bio = r1_bio->bios[i];
rp = get_resync_pages(bio);
if (bio->bi_end_io) {
- page = resync_fetch_page(rp, rp->idx++);
+ page = resync_fetch_page(rp, page_idx);
/*
* won't fail because the vec table is big
@@ -2858,7 +2830,7 @@
nr_sectors += len>>9;
sector_nr += len>>9;
sync_blocks -= (len>>9);
- } while (get_resync_pages(r1_bio->bios[disk]->bi_private)->idx < RESYNC_PAGES);
+ } while (++page_idx < RESYNC_PAGES);
r1_bio->sectors = nr_sectors;
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 5026e7a..f55d4cc 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -110,14 +110,7 @@
#define raid10_log(md, fmt, args...) \
do { if ((md)->queue) blk_add_trace_msg((md)->queue, "raid10 " fmt, ##args); } while (0)
-/*
- * 'strct resync_pages' stores actual pages used for doing the resync
- * IO, and it is per-bio, so make .bi_private points to it.
- */
-static inline struct resync_pages *get_resync_pages(struct bio *bio)
-{
- return bio->bi_private;
-}
+#include "raid1-10.c"
/*
* for resync bio, r10bio pointer can be retrieved from the per-bio
@@ -221,7 +214,6 @@
resync_get_all_pages(rp);
}
- rp->idx = 0;
rp->raid_bio = r10_bio;
bio->bi_private = rp;
if (rbio) {
@@ -913,8 +905,7 @@
bio->bi_next = NULL;
bio->bi_bdev = rdev->bdev;
if (test_bit(Faulty, &rdev->flags)) {
- bio->bi_status = BLK_STS_IOERR;
- bio_endio(bio);
+ bio_io_error(bio);
} else if (unlikely((bio_op(bio) == REQ_OP_DISCARD) &&
!blk_queue_discard(bdev_get_queue(bio->bi_bdev))))
/* Just ignore it */
@@ -1098,8 +1089,7 @@
bio->bi_next = NULL;
bio->bi_bdev = rdev->bdev;
if (test_bit(Faulty, &rdev->flags)) {
- bio->bi_status = BLK_STS_IOERR;
- bio_endio(bio);
+ bio_io_error(bio);
} else if (unlikely((bio_op(bio) == REQ_OP_DISCARD) &&
!blk_queue_discard(bdev_get_queue(bio->bi_bdev))))
/* Just ignore it */
@@ -2087,8 +2077,8 @@
rp = get_resync_pages(tbio);
bio_reset(tbio);
- tbio->bi_vcnt = vcnt;
- tbio->bi_iter.bi_size = fbio->bi_iter.bi_size;
+ md_bio_reset_resync_pages(tbio, rp, fbio->bi_iter.bi_size);
+
rp->raid_bio = r10_bio;
tbio->bi_private = rp;
tbio->bi_iter.bi_sector = r10_bio->devs[i].addr;
@@ -2853,6 +2843,7 @@
sector_t sectors_skipped = 0;
int chunks_skipped = 0;
sector_t chunk_mask = conf->geo.chunk_mask;
+ int page_idx = 0;
if (!conf->r10buf_pool)
if (init_resync(conf))
@@ -3355,7 +3346,7 @@
break;
for (bio= biolist ; bio ; bio=bio->bi_next) {
struct resync_pages *rp = get_resync_pages(bio);
- page = resync_fetch_page(rp, rp->idx++);
+ page = resync_fetch_page(rp, page_idx);
/*
* won't fail because the vec table is big enough
* to hold all these pages
@@ -3364,7 +3355,7 @@
}
nr_sectors += len>>9;
sector_nr += len>>9;
- } while (get_resync_pages(biolist)->idx < RESYNC_PAGES);
+ } while (++page_idx < RESYNC_PAGES);
r10_bio->sectors = nr_sectors;
while (biolist) {
diff --git a/drivers/md/raid5-ppl.c b/drivers/md/raid5-ppl.c
index 77cce35..44ad5ba 100644
--- a/drivers/md/raid5-ppl.c
+++ b/drivers/md/raid5-ppl.c
@@ -1150,7 +1150,7 @@
goto err;
}
- ppl_conf->bs = bioset_create(conf->raid_disks, 0, 0);
+ ppl_conf->bs = bioset_create(conf->raid_disks, 0, BIOSET_NEED_BVECS);
if (!ppl_conf->bs) {
ret = -ENOMEM;
goto err;
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 2ceb338..0fc2748 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -3381,9 +3381,8 @@
sh->dev[i].sector + STRIPE_SECTORS) {
struct bio *nextbi = r5_next_bio(bi, sh->dev[i].sector);
- bi->bi_status = BLK_STS_IOERR;
md_write_end(conf->mddev);
- bio_endio(bi);
+ bio_io_error(bi);
bi = nextbi;
}
if (bitmap_end)
@@ -3403,9 +3402,8 @@
sh->dev[i].sector + STRIPE_SECTORS) {
struct bio *bi2 = r5_next_bio(bi, sh->dev[i].sector);
- bi->bi_status = BLK_STS_IOERR;
md_write_end(conf->mddev);
- bio_endio(bi);
+ bio_io_error(bi);
bi = bi2;
}
@@ -3429,8 +3427,7 @@
struct bio *nextbi =
r5_next_bio(bi, sh->dev[i].sector);
- bi->bi_status = BLK_STS_IOERR;
- bio_endio(bi);
+ bio_io_error(bi);
bi = nextbi;
}
}
@@ -6237,6 +6234,8 @@
pr_debug("%d stripes handled\n", handled);
spin_unlock_irq(&conf->device_lock);
+
+ async_tx_issue_pending_all();
blk_finish_plug(&plug);
pr_debug("--- raid5worker inactive\n");
@@ -7951,12 +7950,10 @@
{
if (!test_bit(MD_RECOVERY_INTR, &conf->mddev->recovery)) {
- struct md_rdev *rdev;
spin_lock_irq(&conf->device_lock);
conf->previous_raid_disks = conf->raid_disks;
- rdev_for_each(rdev, conf->mddev)
- rdev->data_offset = rdev->new_data_offset;
+ md_finish_reshape(conf->mddev);
smp_wmb();
conf->reshape_progress = MaxSector;
conf->mddev->reshape_position = MaxSector;
diff --git a/drivers/media/cec/cec-adap.c b/drivers/media/cec/cec-adap.c
index bf45977..d596b60 100644
--- a/drivers/media/cec/cec-adap.c
+++ b/drivers/media/cec/cec-adap.c
@@ -559,7 +559,7 @@
void cec_transmit_attempt_done(struct cec_adapter *adap, u8 status)
{
- switch (status) {
+ switch (status & ~CEC_TX_STATUS_MAX_RETRIES) {
case CEC_TX_STATUS_OK:
cec_transmit_done(adap, status, 0, 0, 0, 0);
return;
diff --git a/drivers/media/cec/cec-notifier.c b/drivers/media/cec/cec-notifier.c
index 74dc1c3..08b619d 100644
--- a/drivers/media/cec/cec-notifier.c
+++ b/drivers/media/cec/cec-notifier.c
@@ -87,6 +87,9 @@
void cec_notifier_set_phys_addr(struct cec_notifier *n, u16 pa)
{
+ if (n == NULL)
+ return;
+
mutex_lock(&n->lock);
n->phys_addr = pa;
if (n->callback)
@@ -100,6 +103,9 @@
{
u16 pa = CEC_PHYS_ADDR_INVALID;
+ if (n == NULL)
+ return;
+
if (edid && edid->extensions)
pa = cec_get_edid_phys_addr((const u8 *)edid,
EDID_LENGTH * (edid->extensions + 1), NULL);
diff --git a/drivers/media/dvb-core/dvb_ca_en50221.c b/drivers/media/dvb-core/dvb_ca_en50221.c
index af694f2..17970cd 100644
--- a/drivers/media/dvb-core/dvb_ca_en50221.c
+++ b/drivers/media/dvb-core/dvb_ca_en50221.c
@@ -349,7 +349,8 @@
/* read the buffer size from the CAM */
if ((ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN | CMDREG_SR)) != 0)
return ret;
- if ((ret = dvb_ca_en50221_wait_if_status(ca, slot, STATUSREG_DA, HZ / 10)) != 0)
+ ret = dvb_ca_en50221_wait_if_status(ca, slot, STATUSREG_DA, HZ);
+ if (ret != 0)
return ret;
if ((ret = dvb_ca_en50221_read_data(ca, slot, buf, 2)) != 2)
return -EIO;
@@ -644,74 +645,103 @@
}
buf_free = dvb_ringbuffer_free(&ca->slot_info[slot].rx_buffer);
- if (buf_free < (ca->slot_info[slot].link_buf_size + DVB_RINGBUFFER_PKTHDRSIZE)) {
+ if (buf_free < (ca->slot_info[slot].link_buf_size +
+ DVB_RINGBUFFER_PKTHDRSIZE)) {
status = -EAGAIN;
goto exit;
}
}
- /* check if there is data available */
- if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0)
- goto exit;
- if (!(status & STATUSREG_DA)) {
- /* no data */
- status = 0;
- goto exit;
- }
-
- /* read the amount of data */
- if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_SIZE_HIGH)) < 0)
- goto exit;
- bytes_read = status << 8;
- if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_SIZE_LOW)) < 0)
- goto exit;
- bytes_read |= status;
-
- /* check it will fit */
- if (ebuf == NULL) {
- if (bytes_read > ca->slot_info[slot].link_buf_size) {
- pr_err("dvb_ca adapter %d: CAM tried to send a buffer larger than the link buffer size (%i > %i)!\n",
- ca->dvbdev->adapter->num, bytes_read,
- ca->slot_info[slot].link_buf_size);
- ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_LINKINIT;
- status = -EIO;
+ if (ca->pub->read_data &&
+ (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_LINKINIT)) {
+ if (ebuf == NULL)
+ status = ca->pub->read_data(ca->pub, slot, buf,
+ sizeof(buf));
+ else
+ status = ca->pub->read_data(ca->pub, slot, buf, ecount);
+ if (status < 0)
+ return status;
+ bytes_read = status;
+ if (status == 0)
goto exit;
- }
- if (bytes_read < 2) {
- pr_err("dvb_ca adapter %d: CAM sent a buffer that was less than 2 bytes!\n",
- ca->dvbdev->adapter->num);
- ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_LINKINIT;
- status = -EIO;
- goto exit;
- }
} else {
- if (bytes_read > ecount) {
- pr_err("dvb_ca adapter %d: CAM tried to send a buffer larger than the ecount size!\n",
- ca->dvbdev->adapter->num);
+
+ /* check if there is data available */
+ status = ca->pub->read_cam_control(ca->pub, slot,
+ CTRLIF_STATUS);
+ if (status < 0)
+ goto exit;
+ if (!(status & STATUSREG_DA)) {
+ /* no data */
+ status = 0;
+ goto exit;
+ }
+
+ /* read the amount of data */
+ status = ca->pub->read_cam_control(ca->pub, slot,
+ CTRLIF_SIZE_HIGH);
+ if (status < 0)
+ goto exit;
+ bytes_read = status << 8;
+ status = ca->pub->read_cam_control(ca->pub, slot,
+ CTRLIF_SIZE_LOW);
+ if (status < 0)
+ goto exit;
+ bytes_read |= status;
+
+ /* check it will fit */
+ if (ebuf == NULL) {
+ if (bytes_read > ca->slot_info[slot].link_buf_size) {
+ pr_err("dvb_ca adapter %d: CAM tried to send a buffer larger than the link buffer size (%i > %i)!\n",
+ ca->dvbdev->adapter->num, bytes_read,
+ ca->slot_info[slot].link_buf_size);
+ ca->slot_info[slot].slot_state =
+ DVB_CA_SLOTSTATE_LINKINIT;
+ status = -EIO;
+ goto exit;
+ }
+ if (bytes_read < 2) {
+ pr_err("dvb_ca adapter %d: CAM sent a buffer that was less than 2 bytes!\n",
+ ca->dvbdev->adapter->num);
+ ca->slot_info[slot].slot_state =
+ DVB_CA_SLOTSTATE_LINKINIT;
+ status = -EIO;
+ goto exit;
+ }
+ } else {
+ if (bytes_read > ecount) {
+ pr_err("dvb_ca adapter %d: CAM tried to send a buffer larger than the ecount size!\n",
+ ca->dvbdev->adapter->num);
+ status = -EIO;
+ goto exit;
+ }
+ }
+
+ /* fill the buffer */
+ for (i = 0; i < bytes_read; i++) {
+ /* read byte and check */
+ status = ca->pub->read_cam_control(ca->pub, slot,
+ CTRLIF_DATA);
+ if (status < 0)
+ goto exit;
+
+ /* OK, store it in the buffer */
+ buf[i] = status;
+ }
+
+ /* check for read error (RE should now be 0) */
+ status = ca->pub->read_cam_control(ca->pub, slot,
+ CTRLIF_STATUS);
+ if (status < 0)
+ goto exit;
+ if (status & STATUSREG_RE) {
+ ca->slot_info[slot].slot_state =
+ DVB_CA_SLOTSTATE_LINKINIT;
status = -EIO;
goto exit;
}
}
- /* fill the buffer */
- for (i = 0; i < bytes_read; i++) {
- /* read byte and check */
- if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_DATA)) < 0)
- goto exit;
-
- /* OK, store it in the buffer */
- buf[i] = status;
- }
-
- /* check for read error (RE should now be 0) */
- if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0)
- goto exit;
- if (status & STATUSREG_RE) {
- ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_LINKINIT;
- status = -EIO;
- goto exit;
- }
-
/* OK, add it to the receive buffer, or copy into external buffer if supplied */
if (ebuf == NULL) {
if (ca->slot_info[slot].rx_buffer.data == NULL) {
@@ -762,6 +792,10 @@
if (bytes_write > ca->slot_info[slot].link_buf_size)
return -EINVAL;
+ if (ca->pub->write_data &&
+ (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_LINKINIT))
+ return ca->pub->write_data(ca->pub, slot, buf, bytes_write);
+
/* it is possible we are dealing with a single buffer implementation,
thus if there is data available for read or if there is even a read
already in progress, we do nothing but awake the kernel thread to
@@ -1176,7 +1210,8 @@
pr_err("dvb_ca adapter %d: DVB CAM link initialisation failed :(\n",
ca->dvbdev->adapter->num);
- ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID;
+ ca->slot_info[slot].slot_state =
+ DVB_CA_SLOTSTATE_UNINITIALISED;
dvb_ca_en50221_thread_update_delay(ca);
break;
}
diff --git a/drivers/media/dvb-core/dvb_ca_en50221.h b/drivers/media/dvb-core/dvb_ca_en50221.h
index 1e4bbbd..82617ba 100644
--- a/drivers/media/dvb-core/dvb_ca_en50221.h
+++ b/drivers/media/dvb-core/dvb_ca_en50221.h
@@ -41,6 +41,8 @@
* @write_attribute_mem: function for writing attribute memory on the CAM
* @read_cam_control: function for reading the control interface on the CAM
* @write_cam_control: function for reading the control interface on the CAM
+ * @read_data: function for reading data (block mode)
+ * @write_data: function for writing data (block mode)
* @slot_reset: function to reset the CAM slot
* @slot_shutdown: function to shutdown a CAM slot
* @slot_ts_enable: function to enable the Transport Stream on a CAM slot
@@ -66,6 +68,11 @@
int (*write_cam_control)(struct dvb_ca_en50221 *ca,
int slot, u8 address, u8 value);
+ int (*read_data)(struct dvb_ca_en50221 *ca,
+ int slot, u8 *ebuf, int ecount);
+ int (*write_data)(struct dvb_ca_en50221 *ca,
+ int slot, u8 *ebuf, int ecount);
+
int (*slot_reset)(struct dvb_ca_en50221 *ca, int slot);
int (*slot_shutdown)(struct dvb_ca_en50221 *ca, int slot);
int (*slot_ts_enable)(struct dvb_ca_en50221 *ca, int slot);
diff --git a/drivers/media/dvb-frontends/cxd2841er.c b/drivers/media/dvb-frontends/cxd2841er.c
index 08f67d6..12bff77 100644
--- a/drivers/media/dvb-frontends/cxd2841er.c
+++ b/drivers/media/dvb-frontends/cxd2841er.c
@@ -3279,7 +3279,10 @@
else if (priv->state == STATE_ACTIVE_TC)
cxd2841er_read_status_tc(fe, &status);
- cxd2841er_read_signal_strength(fe);
+ if (priv->state == STATE_ACTIVE_TC || priv->state == STATE_ACTIVE_S)
+ cxd2841er_read_signal_strength(fe);
+ else
+ p->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
if (status & FE_HAS_LOCK) {
cxd2841er_read_snr(fe);
diff --git a/drivers/media/dvb-frontends/drx39xyj/drx_driver.h b/drivers/media/dvb-frontends/drx39xyj/drx_driver.h
index 4442e47..cd69e18 100644
--- a/drivers/media/dvb-frontends/drx39xyj/drx_driver.h
+++ b/drivers/media/dvb-frontends/drx39xyj/drx_driver.h
@@ -307,7 +307,7 @@
* \def DRX_UNKNOWN
* \brief Generic UNKNOWN value for DRX enumerated types.
*
-* Used to indicate that the parameter value is unknown or not yet initalized.
+* Used to indicate that the parameter value is unknown or not yet initialized.
*/
#ifndef DRX_UNKNOWN
#define DRX_UNKNOWN (254)
@@ -450,19 +450,6 @@
((u8)((((u16)x)>>8)&0xFF))
/**
-* \brief Macro to sign extend signed 9 bit value to signed 16 bit value
-*/
-#define DRX_S9TOS16(x) ((((u16)x)&0x100) ? ((s16)((u16)(x)|0xFF00)) : (x))
-
-/**
-* \brief Macro to sign extend signed 9 bit value to signed 16 bit value
-*/
-#define DRX_S24TODRXFREQ(x) ((((u32) x) & 0x00800000UL) ? \
- ((s32) \
- (((u32) x) | 0xFF000000)) : \
- ((s32) x))
-
-/**
* \brief Macro to convert 16 bit register value to a s32
*/
#define DRX_U16TODRXFREQ(x) ((x & 0x8000) ? \
diff --git a/drivers/media/dvb-frontends/lnbh25.c b/drivers/media/dvb-frontends/lnbh25.c
index ef3021e..cb486e8 100644
--- a/drivers/media/dvb-frontends/lnbh25.c
+++ b/drivers/media/dvb-frontends/lnbh25.c
@@ -76,8 +76,8 @@
return ret;
}
}
- print_hex_dump_bytes("lnbh25_read_vmon: ",
- DUMP_PREFIX_OFFSET, status, sizeof(status));
+ dev_dbg(&priv->i2c->dev, "%s(): %*ph\n",
+ __func__, (int) sizeof(status), status);
if ((status[0] & (LNBH25_STATUS_OFL | LNBH25_STATUS_VMON)) != 0) {
dev_err(&priv->i2c->dev,
"%s(): voltage in failure state, status reg 0x%x\n",
@@ -178,7 +178,7 @@
fe->ops.release_sec = lnbh25_release;
fe->ops.set_voltage = lnbh25_set_voltage;
- dev_err(&i2c->dev, "%s(): attached at I2C addr 0x%02x\n",
+ dev_info(&i2c->dev, "%s(): attached at I2C addr 0x%02x\n",
__func__, priv->i2c_address);
return fe;
}
diff --git a/drivers/media/dvb-frontends/stv0367.c b/drivers/media/dvb-frontends/stv0367.c
index e726c2e..8ac0f59 100644
--- a/drivers/media/dvb-frontends/stv0367.c
+++ b/drivers/media/dvb-frontends/stv0367.c
@@ -25,6 +25,8 @@
#include <linux/slab.h>
#include <linux/i2c.h>
+#include "dvb_math.h"
+
#include "stv0367.h"
#include "stv0367_defs.h"
#include "stv0367_regs.h"
@@ -1437,7 +1439,7 @@
return 0;
}
-static int stv0367ter_read_snr(struct dvb_frontend *fe, u16 *snr)
+static u32 stv0367ter_snr_readreg(struct dvb_frontend *fe)
{
struct stv0367_state *state = fe->demodulator_priv;
u32 snru32 = 0;
@@ -1453,10 +1455,16 @@
cpt++;
}
-
snru32 /= 10;/*average on 10 values*/
- *snr = snru32 / 1000;
+ return snru32;
+}
+
+static int stv0367ter_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+ u32 snrval = stv0367ter_snr_readreg(fe);
+
+ *snr = snrval / 1000;
return 0;
}
@@ -1501,7 +1509,8 @@
*status = 0;
if (stv0367_readbits(state, F367TER_LK)) {
- *status |= FE_HAS_LOCK;
+ *status = FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI
+ | FE_HAS_SYNC | FE_HAS_LOCK;
dprintk("%s: stv0367 has locked\n", __func__);
}
@@ -2149,6 +2158,18 @@
*status = 0;
+ if (state->cab_state->state > FE_CAB_NOSIGNAL)
+ *status |= FE_HAS_SIGNAL;
+
+ if (state->cab_state->state > FE_CAB_NOCARRIER)
+ *status |= FE_HAS_CARRIER;
+
+ if (state->cab_state->state >= FE_CAB_DEMODOK)
+ *status |= FE_HAS_VITERBI;
+
+ if (state->cab_state->state >= FE_CAB_DATAOK)
+ *status |= FE_HAS_SYNC;
+
if (stv0367_readbits(state, (state->cab_state->qamfec_status_reg ?
state->cab_state->qamfec_status_reg : F367CAB_QAMFEC_LOCK))) {
*status |= FE_HAS_LOCK;
@@ -2702,51 +2723,61 @@
return 0;
}
-static int stv0367cab_read_snr(struct dvb_frontend *fe, u16 *snr)
+static int stv0367cab_snr_power(struct dvb_frontend *fe)
{
struct stv0367_state *state = fe->demodulator_priv;
- u32 noisepercentage;
enum stv0367cab_mod QAMSize;
- u32 regval = 0, temp = 0;
- int power, i;
QAMSize = stv0367_readbits(state, F367CAB_QAM_MODE);
switch (QAMSize) {
case FE_CAB_MOD_QAM4:
- power = 21904;
- break;
+ return 21904;
case FE_CAB_MOD_QAM16:
- power = 20480;
- break;
+ return 20480;
case FE_CAB_MOD_QAM32:
- power = 23040;
- break;
+ return 23040;
case FE_CAB_MOD_QAM64:
- power = 21504;
- break;
+ return 21504;
case FE_CAB_MOD_QAM128:
- power = 23616;
- break;
+ return 23616;
case FE_CAB_MOD_QAM256:
- power = 21760;
- break;
- case FE_CAB_MOD_QAM512:
- power = 1;
- break;
+ return 21760;
case FE_CAB_MOD_QAM1024:
- power = 21280;
- break;
+ return 21280;
default:
- power = 1;
break;
}
+ return 1;
+}
+
+static int stv0367cab_snr_readreg(struct dvb_frontend *fe, int avgdiv)
+{
+ struct stv0367_state *state = fe->demodulator_priv;
+ u32 regval = 0;
+ int i;
+
for (i = 0; i < 10; i++) {
regval += (stv0367_readbits(state, F367CAB_SNR_LO)
+ 256 * stv0367_readbits(state, F367CAB_SNR_HI));
}
- regval /= 10; /*for average over 10 times in for loop above*/
+ if (avgdiv)
+ regval /= 10;
+
+ return regval;
+}
+
+static int stv0367cab_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+ struct stv0367_state *state = fe->demodulator_priv;
+ u32 noisepercentage;
+ u32 regval = 0, temp = 0;
+ int power;
+
+ power = stv0367cab_snr_power(fe);
+ regval = stv0367cab_snr_readreg(fe, 1);
+
if (regval != 0) {
temp = power
* (1 << (3 + stv0367_readbits(state, F367CAB_SNR_PER)));
@@ -2980,21 +3011,117 @@
return -EINVAL;
}
+static void stv0367ddb_read_signal_strength(struct dvb_frontend *fe)
+{
+ struct stv0367_state *state = fe->demodulator_priv;
+ struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+ s32 signalstrength;
+
+ switch (state->activedemod) {
+ case demod_cab:
+ signalstrength = stv0367cab_get_rf_lvl(state) * 1000;
+ break;
+ default:
+ p->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+ return;
+ }
+
+ p->strength.stat[0].scale = FE_SCALE_DECIBEL;
+ p->strength.stat[0].uvalue = signalstrength;
+}
+
+static void stv0367ddb_read_snr(struct dvb_frontend *fe)
+{
+ struct stv0367_state *state = fe->demodulator_priv;
+ struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+ int cab_pwr;
+ u32 regval, tmpval, snrval = 0;
+
+ switch (state->activedemod) {
+ case demod_ter:
+ snrval = stv0367ter_snr_readreg(fe);
+ break;
+ case demod_cab:
+ cab_pwr = stv0367cab_snr_power(fe);
+ regval = stv0367cab_snr_readreg(fe, 0);
+
+ /* prevent division by zero */
+ if (!regval) {
+ snrval = 0;
+ break;
+ }
+
+ tmpval = (cab_pwr * 320) / regval;
+ snrval = ((tmpval != 0) ? (intlog2(tmpval) / 5581) : 0);
+ break;
+ default:
+ p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+ return;
+ }
+
+ p->cnr.stat[0].scale = FE_SCALE_DECIBEL;
+ p->cnr.stat[0].uvalue = snrval;
+}
+
+static void stv0367ddb_read_ucblocks(struct dvb_frontend *fe)
+{
+ struct stv0367_state *state = fe->demodulator_priv;
+ struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+ u32 ucblocks = 0;
+
+ switch (state->activedemod) {
+ case demod_ter:
+ stv0367ter_read_ucblocks(fe, &ucblocks);
+ break;
+ case demod_cab:
+ stv0367cab_read_ucblcks(fe, &ucblocks);
+ break;
+ default:
+ p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+ return;
+ }
+
+ p->block_error.stat[0].scale = FE_SCALE_COUNTER;
+ p->block_error.stat[0].uvalue = ucblocks;
+}
+
static int stv0367ddb_read_status(struct dvb_frontend *fe,
enum fe_status *status)
{
struct stv0367_state *state = fe->demodulator_priv;
+ struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+ int ret;
switch (state->activedemod) {
case demod_ter:
- return stv0367ter_read_status(fe, status);
- case demod_cab:
- return stv0367cab_read_status(fe, status);
- default:
+ ret = stv0367ter_read_status(fe, status);
break;
+ case demod_cab:
+ ret = stv0367cab_read_status(fe, status);
+ break;
+ default:
+ return 0;
}
- return -EINVAL;
+ /* stop and report on *_read_status failure */
+ if (ret)
+ return ret;
+
+ stv0367ddb_read_signal_strength(fe);
+
+ /* read carrier/noise when a carrier is detected */
+ if (*status & FE_HAS_CARRIER)
+ stv0367ddb_read_snr(fe);
+ else
+ p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+
+ /* read uncorrected blocks on FE_HAS_LOCK */
+ if (*status & FE_HAS_LOCK)
+ stv0367ddb_read_ucblocks(fe);
+ else
+ p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+
+ return 0;
}
static int stv0367ddb_get_frontend(struct dvb_frontend *fe,
@@ -3035,6 +3162,7 @@
static int stv0367ddb_init(struct stv0367_state *state)
{
struct stv0367ter_state *ter_state = state->ter_state;
+ struct dtv_frontend_properties *p = &state->fe.dtv_property_cache;
stv0367_writereg(state, R367TER_TOPCTRL, 0x10);
@@ -3109,6 +3237,13 @@
ter_state->first_lock = 0;
ter_state->unlock_counter = 2;
+ p->strength.len = 1;
+ p->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+ p->cnr.len = 1;
+ p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+ p->block_error.len = 1;
+ p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+
return 0;
}
@@ -3126,15 +3261,12 @@
0x400 |/* FE_CAN_QAM_4 */
FE_CAN_QAM_16 | FE_CAN_QAM_32 |
FE_CAN_QAM_64 | FE_CAN_QAM_128 |
- FE_CAN_QAM_256 | FE_CAN_FEC_AUTO |
+ FE_CAN_QAM_256 | FE_CAN_QAM_AUTO |
/* DVB-T */
- FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
- FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 |
- FE_CAN_FEC_AUTO |
- FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 |
- FE_CAN_QAM_128 | FE_CAN_QAM_256 | FE_CAN_QAM_AUTO |
- FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_RECOVER |
- FE_CAN_INVERSION_AUTO |
+ FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+ FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+ FE_CAN_QPSK | FE_CAN_TRANSMISSION_MODE_AUTO |
+ FE_CAN_RECOVER | FE_CAN_INVERSION_AUTO |
FE_CAN_MUTE_TS
},
.release = stv0367_release,
diff --git a/drivers/media/i2c/et8ek8/et8ek8_driver.c b/drivers/media/i2c/et8ek8/et8ek8_driver.c
index 6e313d5..f39f517 100644
--- a/drivers/media/i2c/et8ek8/et8ek8_driver.c
+++ b/drivers/media/i2c/et8ek8/et8ek8_driver.c
@@ -1496,7 +1496,6 @@
static const struct dev_pm_ops et8ek8_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(et8ek8_suspend, et8ek8_resume)
};
-MODULE_DEVICE_TABLE(of, et8ek8_of_table);
static struct i2c_driver et8ek8_i2c_driver = {
.driver = {
diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
index 9da4bf4..7b79a74 100644
--- a/drivers/media/i2c/tvp5150.c
+++ b/drivers/media/i2c/tvp5150.c
@@ -659,7 +659,7 @@
struct tvp5150 *decoder = to_tvp5150(sd);
v4l2_std_id std = decoder->norm;
u8 reg;
- int pos=0;
+ int pos = 0;
if (std == V4L2_STD_ALL) {
dev_err(sd->dev, "VBI can't be configured without knowing number of lines\n");
@@ -669,33 +669,30 @@
line += 3;
}
- if (line<6||line>27)
+ if (line < 6 || line > 27)
return 0;
- while (regs->reg != (u16)-1 ) {
+ while (regs->reg != (u16)-1) {
if ((type & regs->type.vbi_type) &&
- (line>=regs->type.ini_line) &&
- (line<=regs->type.end_line)) {
- type=regs->type.vbi_type;
+ (line >= regs->type.ini_line) &&
+ (line <= regs->type.end_line))
break;
- }
regs++;
pos++;
}
+
if (regs->reg == (u16)-1)
return 0;
- type=pos | (flags & 0xf0);
- reg=((line-6)<<1)+TVP5150_LINE_MODE_INI;
+ type = pos | (flags & 0xf0);
+ reg = ((line - 6) << 1) + TVP5150_LINE_MODE_INI;
- if (fields&1) {
+ if (fields & 1)
tvp5150_write(sd, reg, type);
- }
- if (fields&2) {
- tvp5150_write(sd, reg+1, type);
- }
+ if (fields & 2)
+ tvp5150_write(sd, reg + 1, type);
return type;
}
diff --git a/drivers/media/pci/ddbridge/ddbridge-core.c b/drivers/media/pci/ddbridge/ddbridge-core.c
index 9420479..cd1723e 100644
--- a/drivers/media/pci/ddbridge/ddbridge-core.c
+++ b/drivers/media/pci/ddbridge/ddbridge-core.c
@@ -17,6 +17,8 @@
* http://www.gnu.org/copyleft/gpl.html
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
@@ -114,6 +116,19 @@
return i2c_write(adap, adr, msg, 2);
}
+static inline u32 safe_ddbreadl(struct ddb *dev, u32 adr)
+{
+ u32 val = ddbreadl(adr);
+
+ /* (ddb)readl returns (uint)-1 (all bits set) on failure, catch that */
+ if (val == ~0) {
+ dev_err(&dev->pdev->dev, "ddbreadl failure, adr=%08x\n", adr);
+ return 0;
+ }
+
+ return val;
+}
+
static int ddb_i2c_cmd(struct ddb_i2c *i2c, u32 adr, u32 cmd)
{
struct ddb *dev = i2c->dev;
@@ -124,10 +139,10 @@
ddbwritel((adr << 9) | cmd, i2c->regs + I2C_COMMAND);
stat = wait_event_timeout(i2c->wq, i2c->done == 1, HZ);
if (stat == 0) {
- printk(KERN_ERR "I2C timeout\n");
+ dev_err(&dev->pdev->dev, "I2C timeout\n");
{ /* MSI debugging*/
u32 istat = ddbreadl(INTERRUPT_STATUS);
- printk(KERN_ERR "IRS %08x\n", istat);
+ dev_err(&dev->pdev->dev, "IRS %08x\n", istat);
ddbwritel(istat, INTERRUPT_ACK);
}
return -EIO;
@@ -533,7 +548,7 @@
off = (stat & 0x7ff) << 7;
if (ctrl & 4) {
- printk(KERN_ERR "IA %d %d %08x\n", idx, off, ctrl);
+ dev_err(&dev->pdev->dev, "IA %d %d %08x\n", idx, off, ctrl);
ddbwritel(input->stat, DMA_BUFFER_ACK(input->nr));
return 0;
}
@@ -611,6 +626,7 @@
struct i2c_adapter *i2c = &input->port->i2c->adap;
struct dvb_frontend *fe;
struct drxk_config config;
+ struct device *dev = &input->port->dev->pdev->dev;
memset(&config, 0, sizeof(config));
config.microcode_name = "drxk_a3.mc";
@@ -619,7 +635,7 @@
fe = input->fe = dvb_attach(drxk_attach, &config, i2c);
if (!input->fe) {
- printk(KERN_ERR "No DRXK found!\n");
+ dev_err(dev, "No DRXK found!\n");
return -ENODEV;
}
fe->sec_priv = input;
@@ -632,12 +648,13 @@
{
struct i2c_adapter *i2c = &input->port->i2c->adap;
struct dvb_frontend *fe;
+ struct device *dev = &input->port->dev->pdev->dev;
if (input->fe->ops.i2c_gate_ctrl)
input->fe->ops.i2c_gate_ctrl(input->fe, 1);
fe = dvb_attach(tda18271c2dd_attach, input->fe, i2c, 0x60);
if (!fe) {
- printk(KERN_ERR "No TDA18271 found!\n");
+ dev_err(dev, "No TDA18271 found!\n");
return -ENODEV;
}
if (input->fe->ops.i2c_gate_ctrl)
@@ -670,13 +687,14 @@
static int demod_attach_stv0367(struct ddb_input *input)
{
struct i2c_adapter *i2c = &input->port->i2c->adap;
+ struct device *dev = &input->port->dev->pdev->dev;
/* attach frontend */
input->fe = dvb_attach(stv0367ddb_attach,
&ddb_stv0367_config[(input->nr & 1)], i2c);
if (!input->fe) {
- printk(KERN_ERR "stv0367ddb_attach failed (not found?)\n");
+ dev_err(dev, "stv0367ddb_attach failed (not found?)\n");
return -ENODEV;
}
@@ -690,17 +708,19 @@
static int tuner_tda18212_ping(struct ddb_input *input, unsigned short adr)
{
struct i2c_adapter *adapter = &input->port->i2c->adap;
+ struct device *dev = &input->port->dev->pdev->dev;
+
u8 tda_id[2];
u8 subaddr = 0x00;
- printk(KERN_DEBUG "stv0367-tda18212 tuner ping\n");
+ dev_dbg(dev, "stv0367-tda18212 tuner ping\n");
if (input->fe->ops.i2c_gate_ctrl)
input->fe->ops.i2c_gate_ctrl(input->fe, 1);
if (i2c_read_regs(adapter, adr, subaddr, tda_id, sizeof(tda_id)) < 0)
- printk(KERN_DEBUG "tda18212 ping 1 fail\n");
+ dev_dbg(dev, "tda18212 ping 1 fail\n");
if (i2c_read_regs(adapter, adr, subaddr, tda_id, sizeof(tda_id)) < 0)
- printk(KERN_DEBUG "tda18212 ping 2 fail\n");
+ dev_warn(dev, "tda18212 ping failed, expect problems\n");
if (input->fe->ops.i2c_gate_ctrl)
input->fe->ops.i2c_gate_ctrl(input->fe, 0);
@@ -711,6 +731,7 @@
static int demod_attach_cxd28xx(struct ddb_input *input, int par, int osc24)
{
struct i2c_adapter *i2c = &input->port->i2c->adap;
+ struct device *dev = &input->port->dev->pdev->dev;
struct cxd2841er_config cfg;
/* the cxd2841er driver expects 8bit/shifted I2C addresses */
@@ -728,7 +749,7 @@
input->fe = dvb_attach(cxd2841er_attach_t_c, &cfg, i2c);
if (!input->fe) {
- printk(KERN_ERR "No Sony CXD28xx found!\n");
+ dev_err(dev, "No Sony CXD28xx found!\n");
return -ENODEV;
}
@@ -742,6 +763,7 @@
static int tuner_attach_tda18212(struct ddb_input *input, u32 porttype)
{
struct i2c_adapter *adapter = &input->port->i2c->adap;
+ struct device *dev = &input->port->dev->pdev->dev;
struct i2c_client *client;
struct tda18212_config config = {
.fe = input->fe,
@@ -786,7 +808,7 @@
return 0;
err:
- printk(KERN_INFO "TDA18212 tuner not found. Device is not fully operational.\n");
+ dev_warn(dev, "TDA18212 tuner not found. Device is not fully operational.\n");
return -ENODEV;
}
@@ -847,19 +869,20 @@
static int demod_attach_stv0900(struct ddb_input *input, int type)
{
struct i2c_adapter *i2c = &input->port->i2c->adap;
+ struct device *dev = &input->port->dev->pdev->dev;
struct stv090x_config *feconf = type ? &stv0900_aa : &stv0900;
input->fe = dvb_attach(stv090x_attach, feconf, i2c,
(input->nr & 1) ? STV090x_DEMODULATOR_1
: STV090x_DEMODULATOR_0);
if (!input->fe) {
- printk(KERN_ERR "No STV0900 found!\n");
+ dev_err(dev, "No STV0900 found!\n");
return -ENODEV;
}
if (!dvb_attach(lnbh24_attach, input->fe, i2c, 0,
0, (input->nr & 1) ?
(0x09 - type) : (0x0b - type))) {
- printk(KERN_ERR "No LNBH24 found!\n");
+ dev_err(dev, "No LNBH24 found!\n");
return -ENODEV;
}
return 0;
@@ -868,6 +891,7 @@
static int tuner_attach_stv6110(struct ddb_input *input, int type)
{
struct i2c_adapter *i2c = &input->port->i2c->adap;
+ struct device *dev = &input->port->dev->pdev->dev;
struct stv090x_config *feconf = type ? &stv0900_aa : &stv0900;
struct stv6110x_config *tunerconf = (input->nr & 1) ?
&stv6110b : &stv6110a;
@@ -875,10 +899,10 @@
ctl = dvb_attach(stv6110x_attach, input->fe, tunerconf, i2c);
if (!ctl) {
- printk(KERN_ERR "No STV6110X found!\n");
+ dev_err(dev, "No STV6110X found!\n");
return -ENODEV;
}
- printk(KERN_INFO "attach tuner input %d adr %02x\n",
+ dev_info(dev, "attach tuner input %d adr %02x\n",
input->nr, tunerconf->addr);
feconf->tuner_init = ctl->tuner_init;
@@ -1009,13 +1033,14 @@
struct ddb_port *port = input->port;
struct dvb_adapter *adap = &input->adap;
struct dvb_demux *dvbdemux = &input->demux;
+ struct device *dev = &input->port->dev->pdev->dev;
int sony_osc24 = 0, sony_tspar = 0;
ret = dvb_register_adapter(adap, "DDBridge", THIS_MODULE,
&input->port->dev->pdev->dev,
adapter_nr);
if (ret < 0) {
- printk(KERN_ERR "ddbridge: Could not register adapter.Check if you enabled enough adapters in dvb-core!\n");
+ dev_err(dev, "Could not register adapter. Check if you enabled enough adapters in dvb-core!\n");
return ret;
}
input->attached = 1;
@@ -1241,9 +1266,9 @@
if (input->port->class == DDB_PORT_TUNER) {
if (4&ddbreadl(DMA_BUFFER_CONTROL(input->nr)))
- printk(KERN_ERR "Overflow input %d\n", input->nr);
+ dev_err(&dev->pdev->dev, "Overflow input %d\n", input->nr);
while (input->cbuf != ((input->stat >> 11) & 0x1f)
- || (4&ddbreadl(DMA_BUFFER_CONTROL(input->nr)))) {
+ || (4 & safe_ddbreadl(dev, DMA_BUFFER_CONTROL(input->nr)))) {
dvb_dmx_swfilter_packets(&input->demux,
input->vbuf[input->cbuf],
input->dma_buf_size / 188);
@@ -1280,6 +1305,7 @@
.adr = 0x40,
.polarity = 1,
.clock_mode = 1,
+ .max_i2c = 512,
};
static int ddb_ci_attach(struct ddb_port *port)
@@ -1310,6 +1336,7 @@
static int ddb_port_attach(struct ddb_port *port)
{
+ struct device *dev = &port->dev->pdev->dev;
int ret = 0;
switch (port->class) {
@@ -1326,7 +1353,7 @@
break;
}
if (ret < 0)
- printk(KERN_ERR "port_attach on port %d failed\n", port->nr);
+ dev_err(dev, "port_attach on port %d failed\n", port->nr);
return ret;
}
@@ -1377,6 +1404,7 @@
static int init_xo2(struct ddb_port *port)
{
struct i2c_adapter *i2c = &port->i2c->adap;
+ struct device *dev = &port->dev->pdev->dev;
u8 val, data[2];
int res;
@@ -1385,7 +1413,7 @@
return res;
if (data[0] != 0x01) {
- pr_info("Port %d: invalid XO2\n", port->nr);
+ dev_info(dev, "Port %d: invalid XO2\n", port->nr);
return -1;
}
@@ -1511,7 +1539,7 @@
port->class = DDB_PORT_CI;
ddbwritel(I2C_SPEED_400, port->i2c->regs + I2C_TIMING);
} else if (port_has_xo2(port, &xo2_type, &xo2_id)) {
- printk(KERN_INFO "Port %d (TAB %d): XO2 type: %d, id: %d\n",
+ dev_dbg(&dev->pdev->dev, "Port %d (TAB %d): XO2 type: %d, id: %d\n",
port->nr, port->nr+1, xo2_type, xo2_id);
ddbwritel(I2C_SPEED_400, port->i2c->regs + I2C_TIMING);
@@ -1556,10 +1584,10 @@
}
break;
case DDB_XO2_TYPE_CI:
- printk(KERN_INFO "DuoFlex CI modules not supported\n");
+ dev_info(&dev->pdev->dev, "DuoFlex CI modules not supported\n");
break;
default:
- printk(KERN_INFO "Unknown XO2 DuoFlex module\n");
+ dev_info(&dev->pdev->dev, "Unknown XO2 DuoFlex module\n");
break;
}
} else if (port_has_cxd28xx(port, &cxd_id)) {
@@ -1611,7 +1639,7 @@
ddbwritel(I2C_SPEED_100, port->i2c->regs + I2C_TIMING);
}
- printk(KERN_INFO "Port %d (TAB %d): %s\n",
+ dev_info(&dev->pdev->dev, "Port %d (TAB %d): %s\n",
port->nr, port->nr+1, modname);
}
@@ -1765,7 +1793,7 @@
wbuf += 4;
wlen -= 4;
ddbwritel(data, SPI_DATA);
- while (ddbreadl(SPI_CONTROL) & 0x0004)
+ while (safe_ddbreadl(dev, SPI_CONTROL) & 0x0004)
;
}
@@ -1785,7 +1813,7 @@
if (shift)
data <<= shift;
ddbwritel(data, SPI_DATA);
- while (ddbreadl(SPI_CONTROL) & 0x0004)
+ while (safe_ddbreadl(dev, SPI_CONTROL) & 0x0004)
;
if (!rlen) {
@@ -1797,7 +1825,7 @@
while (rlen > 4) {
ddbwritel(0xffffffff, SPI_DATA);
- while (ddbreadl(SPI_CONTROL) & 0x0004)
+ while (safe_ddbreadl(dev, SPI_CONTROL) & 0x0004)
;
data = ddbreadl(SPI_DATA);
*(u32 *) rbuf = swab32(data);
@@ -1806,7 +1834,7 @@
}
ddbwritel(0x0003 | ((rlen << (8 + 3)) & 0x1F00), SPI_CONTROL);
ddbwritel(0xffffffff, SPI_DATA);
- while (ddbreadl(SPI_CONTROL) & 0x0004)
+ while (safe_ddbreadl(dev, SPI_CONTROL) & 0x0004)
;
data = ddbreadl(SPI_DATA);
@@ -1993,7 +2021,7 @@
dev->pdev = pdev;
pci_set_drvdata(pdev, dev);
dev->info = (struct ddb_info *) id->driver_data;
- printk(KERN_INFO "DDBridge driver detected: %s\n", dev->info->name);
+ dev_info(&pdev->dev, "Detected %s\n", dev->info->name);
dev->regs = ioremap(pci_resource_start(dev->pdev, 0),
pci_resource_len(dev->pdev, 0));
@@ -2001,13 +2029,13 @@
stat = -ENOMEM;
goto fail;
}
- printk(KERN_INFO "HW %08x FW %08x\n", ddbreadl(0), ddbreadl(4));
+ dev_info(&pdev->dev, "HW %08x FW %08x\n", ddbreadl(0), ddbreadl(4));
#ifdef CONFIG_PCI_MSI
if (pci_msi_enabled())
stat = pci_enable_msi(dev->pdev);
if (stat) {
- printk(KERN_INFO ": MSI not available.\n");
+ dev_info(&pdev->dev, "MSI not available.\n");
} else {
irq_flag = 0;
dev->msi = 1;
@@ -2040,7 +2068,7 @@
goto fail1;
ddb_ports_init(dev);
if (ddb_buffers_alloc(dev) < 0) {
- printk(KERN_INFO ": Could not allocate buffer memory\n");
+ dev_err(&pdev->dev, "Could not allocate buffer memory\n");
goto fail2;
}
if (ddb_ports_attach(dev) < 0)
@@ -2050,19 +2078,19 @@
fail3:
ddb_ports_detach(dev);
- printk(KERN_ERR "fail3\n");
+ dev_err(&pdev->dev, "fail3\n");
ddb_ports_release(dev);
fail2:
- printk(KERN_ERR "fail2\n");
+ dev_err(&pdev->dev, "fail2\n");
ddb_buffers_free(dev);
fail1:
- printk(KERN_ERR "fail1\n");
+ dev_err(&pdev->dev, "fail1\n");
if (dev->msi)
pci_disable_msi(dev->pdev);
if (stat == 0)
free_irq(dev->pdev->irq, dev);
fail:
- printk(KERN_ERR "fail\n");
+ dev_err(&pdev->dev, "fail\n");
ddb_unmap(dev);
pci_set_drvdata(pdev, NULL);
pci_disable_device(pdev);
@@ -2242,7 +2270,7 @@
{
int ret;
- printk(KERN_INFO "Digital Devices PCIE bridge driver, Copyright (C) 2010-11 Digital Devices GmbH\n");
+ pr_info("Digital Devices PCIE bridge driver, Copyright (C) 2010-11 Digital Devices GmbH\n");
ret = ddb_class_create();
if (ret < 0)
diff --git a/drivers/media/pci/ngene/ngene-core.c b/drivers/media/pci/ngene/ngene-core.c
index ce69e64..8c92cb7 100644
--- a/drivers/media/pci/ngene/ngene-core.c
+++ b/drivers/media/pci/ngene/ngene-core.c
@@ -336,9 +336,9 @@
{
int result;
- down(&dev->cmd_mutex);
+ mutex_lock(&dev->cmd_mutex);
result = ngene_command_mutex(dev, com);
- up(&dev->cmd_mutex);
+ mutex_unlock(&dev->cmd_mutex);
return result;
}
@@ -560,7 +560,6 @@
u16 BsSPI = ((stream & 1) ? 0x9800 : 0x9700);
u16 BsSDO = 0x9B00;
- down(&dev->stream_mutex);
memset(&com, 0, sizeof(com));
com.cmd.hdr.Opcode = CMD_CONTROL;
com.cmd.hdr.Length = sizeof(struct FW_STREAM_CONTROL) - 2;
@@ -586,17 +585,13 @@
chan->State = KSSTATE_ACQUIRE;
chan->HWState = HWSTATE_STOP;
spin_unlock_irq(&chan->state_lock);
- if (ngene_command(dev, &com) < 0) {
- up(&dev->stream_mutex);
+ if (ngene_command(dev, &com) < 0)
return -1;
- }
/* clear_buffers(chan); */
flush_buffers(chan);
- up(&dev->stream_mutex);
return 0;
}
spin_unlock_irq(&chan->state_lock);
- up(&dev->stream_mutex);
return 0;
}
@@ -692,11 +687,9 @@
chan->HWState = HWSTATE_STARTUP;
spin_unlock_irq(&chan->state_lock);
- if (ngene_command(dev, &com) < 0) {
- up(&dev->stream_mutex);
+ if (ngene_command(dev, &com) < 0)
return -1;
- }
- up(&dev->stream_mutex);
+
return 0;
}
@@ -750,8 +743,11 @@
/* else printk(KERN_INFO DEVICE_NAME ": lock=%08x\n",
ngreadl(0x9310)); */
+ mutex_lock(&dev->stream_mutex);
ret = ngene_command_stream_control(dev, chan->number,
control, mode, flags);
+ mutex_unlock(&dev->stream_mutex);
+
if (!ret)
chan->running = state;
else
@@ -1283,7 +1279,7 @@
static void ngene_stop(struct ngene *dev)
{
- down(&dev->cmd_mutex);
+ mutex_destroy(&dev->cmd_mutex);
i2c_del_adapter(&(dev->channel[0].i2c_adapter));
i2c_del_adapter(&(dev->channel[1].i2c_adapter));
ngwritel(0, NGENE_INT_ENABLE);
@@ -1346,10 +1342,10 @@
init_waitqueue_head(&dev->cmd_wq);
init_waitqueue_head(&dev->tx_wq);
init_waitqueue_head(&dev->rx_wq);
- sema_init(&dev->cmd_mutex, 1);
- sema_init(&dev->stream_mutex, 1);
+ mutex_init(&dev->cmd_mutex);
+ mutex_init(&dev->stream_mutex);
sema_init(&dev->pll_mutex, 1);
- sema_init(&dev->i2c_switch_mutex, 1);
+ mutex_init(&dev->i2c_switch_mutex);
spin_lock_init(&dev->cmd_lock);
for (i = 0; i < MAX_STREAM; i++)
spin_lock_init(&dev->channel[i].state_lock);
@@ -1606,10 +1602,10 @@
com.in_len = 3;
com.out_len = 1;
- down(&dev->cmd_mutex);
+ mutex_lock(&dev->cmd_mutex);
ngwritel(0, NGENE_INT_ENABLE);
ngene_command_mutex(dev, &com);
- up(&dev->cmd_mutex);
+ mutex_unlock(&dev->cmd_mutex);
}
void ngene_shutdown(struct pci_dev *pdev)
diff --git a/drivers/media/pci/ngene/ngene-i2c.c b/drivers/media/pci/ngene/ngene-i2c.c
index cf39fcf..fbf3635 100644
--- a/drivers/media/pci/ngene/ngene-i2c.c
+++ b/drivers/media/pci/ngene/ngene-i2c.c
@@ -118,7 +118,7 @@
(struct ngene_channel *)i2c_get_adapdata(adapter);
struct ngene *dev = chan->dev;
- down(&dev->i2c_switch_mutex);
+ mutex_lock(&dev->i2c_switch_mutex);
ngene_i2c_set_bus(dev, chan->number);
if (num == 2 && msg[1].flags & I2C_M_RD && !(msg[0].flags & I2C_M_RD))
@@ -136,11 +136,11 @@
msg[0].buf, msg[0].len, 0))
goto done;
- up(&dev->i2c_switch_mutex);
+ mutex_unlock(&dev->i2c_switch_mutex);
return -EIO;
done:
- up(&dev->i2c_switch_mutex);
+ mutex_unlock(&dev->i2c_switch_mutex);
return num;
}
diff --git a/drivers/media/pci/ngene/ngene.h b/drivers/media/pci/ngene/ngene.h
index 10d8f74..7c7cd21 100644
--- a/drivers/media/pci/ngene/ngene.h
+++ b/drivers/media/pci/ngene/ngene.h
@@ -762,10 +762,10 @@
wait_queue_head_t cmd_wq;
int cmd_done;
- struct semaphore cmd_mutex;
- struct semaphore stream_mutex;
+ struct mutex cmd_mutex;
+ struct mutex stream_mutex;
struct semaphore pll_mutex;
- struct semaphore i2c_switch_mutex;
+ struct mutex i2c_switch_mutex;
int i2c_current_channel;
int i2c_current_bus;
spinlock_t cmd_lock;
diff --git a/drivers/media/pci/tw5864/tw5864-video.c b/drivers/media/pci/tw5864/tw5864-video.c
index 2a044be..e7bd2b8 100644
--- a/drivers/media/pci/tw5864/tw5864-video.c
+++ b/drivers/media/pci/tw5864/tw5864-video.c
@@ -545,6 +545,7 @@
switch (input->std) {
default:
WARN_ON_ONCE(1);
+ return -EINVAL;
case STD_NTSC:
f->fmt.pix.height = 480;
break;
diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index 1313cd5..fb1fa0b 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -475,8 +475,8 @@
tristate "Qualcomm Venus V4L2 encoder/decoder driver"
depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA
depends on (ARCH_QCOM && IOMMU_DMA) || COMPILE_TEST
- select QCOM_MDT_LOADER if (ARM || ARM64)
- select QCOM_SCM if (ARM || ARM64)
+ select QCOM_MDT_LOADER if ARCH_QCOM
+ select QCOM_SCM if ARCH_QCOM
select VIDEOBUF2_DMA_SG
select V4L2_MEM2MEM_DEV
---help---
diff --git a/drivers/media/platform/coda/coda-bit.c b/drivers/media/platform/coda/coda-bit.c
index 25cbf9e..bba1eb4 100644
--- a/drivers/media/platform/coda/coda-bit.c
+++ b/drivers/media/platform/coda/coda-bit.c
@@ -393,8 +393,8 @@
int ret;
int i;
- if (ctx->codec && (ctx->codec->src_fourcc == V4L2_PIX_FMT_H264 ||
- ctx->codec->dst_fourcc == V4L2_PIX_FMT_H264)) {
+ if (ctx->codec->src_fourcc == V4L2_PIX_FMT_H264 ||
+ ctx->codec->dst_fourcc == V4L2_PIX_FMT_H264) {
width = round_up(q_data->width, 16);
height = round_up(q_data->height, 16);
} else {
@@ -2198,7 +2198,7 @@
ctx->display_idx = display_idx;
}
-static void coda_error_decode(struct coda_ctx *ctx)
+static void coda_decode_timeout(struct coda_ctx *ctx)
{
struct vb2_v4l2_buffer *dst_buf;
@@ -2223,7 +2223,7 @@
.start_streaming = coda_start_decoding,
.prepare_run = coda_prepare_decode,
.finish_run = coda_finish_decode,
- .error_run = coda_error_decode,
+ .run_timeout = coda_decode_timeout,
.seq_end_work = coda_seq_end_work,
.release = coda_bit_release,
};
diff --git a/drivers/media/platform/coda/coda-common.c b/drivers/media/platform/coda/coda-common.c
index f92cc7d..829c789 100644
--- a/drivers/media/platform/coda/coda-common.c
+++ b/drivers/media/platform/coda/coda-common.c
@@ -1164,8 +1164,8 @@
coda_hw_reset(ctx);
- if (ctx->ops->error_run)
- ctx->ops->error_run(ctx);
+ if (ctx->ops->run_timeout)
+ ctx->ops->run_timeout(ctx);
} else if (!ctx->aborting) {
ctx->ops->finish_run(ctx);
}
diff --git a/drivers/media/platform/coda/coda.h b/drivers/media/platform/coda/coda.h
index 40fe22f..c5f504d 100644
--- a/drivers/media/platform/coda/coda.h
+++ b/drivers/media/platform/coda/coda.h
@@ -183,7 +183,7 @@
int (*start_streaming)(struct coda_ctx *ctx);
int (*prepare_run)(struct coda_ctx *ctx);
void (*finish_run)(struct coda_ctx *ctx);
- void (*error_run)(struct coda_ctx *ctx);
+ void (*run_timeout)(struct coda_ctx *ctx);
void (*seq_end_work)(struct work_struct *work);
void (*release)(struct coda_ctx *ctx);
};
diff --git a/drivers/media/platform/davinci/ccdc_hw_device.h b/drivers/media/platform/davinci/ccdc_hw_device.h
index 8f6688a..f1b5210 100644
--- a/drivers/media/platform/davinci/ccdc_hw_device.h
+++ b/drivers/media/platform/davinci/ccdc_hw_device.h
@@ -42,16 +42,6 @@
int (*set_hw_if_params) (struct vpfe_hw_if_param *param);
/* get interface parameters */
int (*get_hw_if_params) (struct vpfe_hw_if_param *param);
- /*
- * Pointer to function to set parameters. Used
- * for implementing VPFE_S_CCDC_PARAMS
- */
- int (*set_params) (void *params);
- /*
- * Pointer to function to get parameter. Used
- * for implementing VPFE_G_CCDC_PARAMS
- */
- int (*get_params) (void *params);
/* Pointer to function to configure ccdc */
int (*configure) (void);
diff --git a/drivers/media/platform/davinci/dm355_ccdc.c b/drivers/media/platform/davinci/dm355_ccdc.c
index 73db166..6d492dc 100644
--- a/drivers/media/platform/davinci/dm355_ccdc.c
+++ b/drivers/media/platform/davinci/dm355_ccdc.c
@@ -17,12 +17,7 @@
* This module is for configuring DM355 CCD controller of VPFE to capture
* Raw yuv or Bayer RGB data from a decoder. CCDC has several modules
* such as Defect Pixel Correction, Color Space Conversion etc to
- * pre-process the Bayer RGB data, before writing it to SDRAM. This
- * module also allows application to configure individual
- * module parameters through VPFE_CMD_S_CCDC_RAW_PARAMS IOCTL.
- * To do so, application include dm355_ccdc.h and vpfe_capture.h header
- * files. The setparams() API is called by vpfe_capture driver
- * to configure module parameters
+ * pre-process the Bayer RGB data, before writing it to SDRAM.
*
* TODO: 1) Raw bayer parameter settings and bayer capture
* 2) Split module parameter structure to module specific ioctl structs
@@ -260,90 +255,6 @@
dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_setwin...");
}
-static int validate_ccdc_param(struct ccdc_config_params_raw *ccdcparam)
-{
- if (ccdcparam->datasft < CCDC_DATA_NO_SHIFT ||
- ccdcparam->datasft > CCDC_DATA_SHIFT_6BIT) {
- dev_dbg(ccdc_cfg.dev, "Invalid value of data shift\n");
- return -EINVAL;
- }
-
- if (ccdcparam->mfilt1 < CCDC_NO_MEDIAN_FILTER1 ||
- ccdcparam->mfilt1 > CCDC_MEDIAN_FILTER1) {
- dev_dbg(ccdc_cfg.dev, "Invalid value of median filter1\n");
- return -EINVAL;
- }
-
- if (ccdcparam->mfilt2 < CCDC_NO_MEDIAN_FILTER2 ||
- ccdcparam->mfilt2 > CCDC_MEDIAN_FILTER2) {
- dev_dbg(ccdc_cfg.dev, "Invalid value of median filter2\n");
- return -EINVAL;
- }
-
- if ((ccdcparam->med_filt_thres < 0) ||
- (ccdcparam->med_filt_thres > CCDC_MED_FILT_THRESH)) {
- dev_dbg(ccdc_cfg.dev,
- "Invalid value of median filter threshold\n");
- return -EINVAL;
- }
-
- if (ccdcparam->data_sz < CCDC_DATA_16BITS ||
- ccdcparam->data_sz > CCDC_DATA_8BITS) {
- dev_dbg(ccdc_cfg.dev, "Invalid value of data size\n");
- return -EINVAL;
- }
-
- if (ccdcparam->alaw.enable) {
- if (ccdcparam->alaw.gamma_wd < CCDC_GAMMA_BITS_13_4 ||
- ccdcparam->alaw.gamma_wd > CCDC_GAMMA_BITS_09_0) {
- dev_dbg(ccdc_cfg.dev, "Invalid value of ALAW\n");
- return -EINVAL;
- }
- }
-
- if (ccdcparam->blk_clamp.b_clamp_enable) {
- if (ccdcparam->blk_clamp.sample_pixel < CCDC_SAMPLE_1PIXELS ||
- ccdcparam->blk_clamp.sample_pixel > CCDC_SAMPLE_16PIXELS) {
- dev_dbg(ccdc_cfg.dev,
- "Invalid value of sample pixel\n");
- return -EINVAL;
- }
- if (ccdcparam->blk_clamp.sample_ln < CCDC_SAMPLE_1LINES ||
- ccdcparam->blk_clamp.sample_ln > CCDC_SAMPLE_16LINES) {
- dev_dbg(ccdc_cfg.dev,
- "Invalid value of sample lines\n");
- return -EINVAL;
- }
- }
- return 0;
-}
-
-/* Parameter operations */
-static int ccdc_set_params(void __user *params)
-{
- struct ccdc_config_params_raw ccdc_raw_params;
- int x;
-
- /* only raw module parameters can be set through the IOCTL */
- if (ccdc_cfg.if_type != VPFE_RAW_BAYER)
- return -EINVAL;
-
- x = copy_from_user(&ccdc_raw_params, params, sizeof(ccdc_raw_params));
- if (x) {
- dev_dbg(ccdc_cfg.dev, "ccdc_set_params: error in copying ccdcparams, %d\n",
- x);
- return -EFAULT;
- }
-
- if (!validate_ccdc_param(&ccdc_raw_params)) {
- memcpy(&ccdc_cfg.bayer.config_params,
- &ccdc_raw_params,
- sizeof(ccdc_raw_params));
- return 0;
- }
- return -EINVAL;
-}
-
/* This function will configure CCDC for YCbCr video capture */
static void ccdc_config_ycbcr(void)
{
@@ -939,7 +850,6 @@
.enable = ccdc_enable,
.enable_out_to_sdram = ccdc_enable_output_to_sdram,
.set_hw_if_params = ccdc_set_hw_if_params,
- .set_params = ccdc_set_params,
.configure = ccdc_configure,
.set_buftype = ccdc_set_buftype,
.get_buftype = ccdc_get_buftype,
diff --git a/drivers/media/platform/davinci/dm644x_ccdc.c b/drivers/media/platform/davinci/dm644x_ccdc.c
index 740fbc7..3b2d8a9 100644
--- a/drivers/media/platform/davinci/dm644x_ccdc.c
+++ b/drivers/media/platform/davinci/dm644x_ccdc.c
@@ -17,13 +17,9 @@
* This module is for configuring CCD controller of DM6446 VPFE to capture
* Raw yuv or Bayer RGB data from a decoder. CCDC has several modules
* such as Defect Pixel Correction, Color Space Conversion etc to
- * pre-process the Raw Bayer RGB data, before writing it to SDRAM. This
- * module also allows application to configure individual
- * module parameters through VPFE_CMD_S_CCDC_RAW_PARAMS IOCTL.
- * To do so, application includes dm644x_ccdc.h and vpfe_capture.h header
- * files. The setparams() API is called by vpfe_capture driver
- * to configure module parameters. This file is named DM644x so that other
- * variants such DM6443 may be supported using the same module.
+ * pre-process the Raw Bayer RGB data, before writing it to SDRAM.
+ * This file is named DM644x so that other variants such DM6443
+ * may be supported using the same module.
*
* TODO: Test Raw bayer parameter settings and bayer capture
* Split module parameter structure to module specific ioctl structs
@@ -216,96 +212,8 @@
dev_notice(ccdc_cfg.dev, "\nReading 0x%x to VERT_LINES...\n", val);
}
-static int validate_ccdc_param(struct ccdc_config_params_raw *ccdcparam)
-{
- if (ccdcparam->alaw.enable) {
- u8 max_gamma = ccdc_gamma_width_max_bit(ccdcparam->alaw.gamma_wd);
- u8 max_data = ccdc_data_size_max_bit(ccdcparam->data_sz);
-
- if ((ccdcparam->alaw.gamma_wd > CCDC_GAMMA_BITS_09_0) ||
- (ccdcparam->alaw.gamma_wd < CCDC_GAMMA_BITS_15_6) ||
- (max_gamma > max_data)) {
- dev_dbg(ccdc_cfg.dev, "\nInvalid data line select");
- return -1;
- }
- }
- return 0;
-}
-
-static int ccdc_update_raw_params(struct ccdc_config_params_raw *raw_params)
-{
- struct ccdc_config_params_raw *config_params =
- &ccdc_cfg.bayer.config_params;
- unsigned int *fpc_virtaddr = NULL;
- unsigned int *fpc_physaddr = NULL;
-
- memcpy(config_params, raw_params, sizeof(*raw_params));
- /*
- * allocate memory for fault pixel table and copy the user
- * values to the table
- */
- if (!config_params->fault_pxl.enable)
- return 0;
-
- fpc_physaddr = (unsigned int *)config_params->fault_pxl.fpc_table_addr;
- fpc_virtaddr = (unsigned int *)phys_to_virt(
- (unsigned long)fpc_physaddr);
- /*
- * Allocate memory for FPC table if current
- * FPC table buffer is not big enough to
- * accommodate FPC Number requested
- */
- if (raw_params->fault_pxl.fp_num != config_params->fault_pxl.fp_num) {
- if (fpc_physaddr != NULL) {
- free_pages((unsigned long)fpc_virtaddr,
- get_order
- (config_params->fault_pxl.fp_num *
- FP_NUM_BYTES));
- }
-
- /* Allocate memory for FPC table */
- fpc_virtaddr =
- (unsigned int *)__get_free_pages(GFP_KERNEL | GFP_DMA,
- get_order(raw_params->
- fault_pxl.fp_num *
- FP_NUM_BYTES));
-
- if (fpc_virtaddr == NULL) {
- dev_dbg(ccdc_cfg.dev,
- "\nUnable to allocate memory for FPC");
- return -EFAULT;
- }
- fpc_physaddr =
- (unsigned int *)virt_to_phys((void *)fpc_virtaddr);
- }
-
- /* Copy number of fault pixels and FPC table */
- config_params->fault_pxl.fp_num = raw_params->fault_pxl.fp_num;
- if (copy_from_user(fpc_virtaddr,
- (void __user *)raw_params->fault_pxl.fpc_table_addr,
- config_params->fault_pxl.fp_num * FP_NUM_BYTES)) {
- dev_dbg(ccdc_cfg.dev, "\n copy_from_user failed");
- return -EFAULT;
- }
- config_params->fault_pxl.fpc_table_addr = (unsigned long)fpc_physaddr;
- return 0;
-}
-
static int ccdc_close(struct device *dev)
{
- struct ccdc_config_params_raw *config_params =
- &ccdc_cfg.bayer.config_params;
- unsigned int *fpc_physaddr = NULL, *fpc_virtaddr = NULL;
-
- fpc_physaddr = (unsigned int *)config_params->fault_pxl.fpc_table_addr;
-
- if (fpc_physaddr != NULL) {
- fpc_virtaddr = (unsigned int *)
- phys_to_virt((unsigned long)fpc_physaddr);
- free_pages((unsigned long)fpc_virtaddr,
- get_order(config_params->fault_pxl.fp_num *
- FP_NUM_BYTES));
- }
return 0;
}
@@ -339,29 +247,6 @@
vpss_clear_wbl_overflow(VPSS_PCR_CCDC_WBL_O);
}
-/* Parameter operations */
-static int ccdc_set_params(void __user *params)
-{
- struct ccdc_config_params_raw ccdc_raw_params;
- int x;
-
- if (ccdc_cfg.if_type != VPFE_RAW_BAYER)
- return -EINVAL;
-
- x = copy_from_user(&ccdc_raw_params, params, sizeof(ccdc_raw_params));
- if (x) {
- dev_dbg(ccdc_cfg.dev, "ccdc_set_params: error in copyingccdc params, %d\n",
- x);
- return -EFAULT;
- }
-
- if (!validate_ccdc_param(&ccdc_raw_params)) {
- if (!ccdc_update_raw_params(&ccdc_raw_params))
- return 0;
- }
- return -EINVAL;
-}
-
/*
* ccdc_config_ycbcr()
* This function will configure CCDC for YCbCr video capture
@@ -489,32 +374,6 @@
regw(val, CCDC_BLKCMP);
}
-static void ccdc_config_fpc(struct ccdc_fault_pixel *fpc)
-{
- u32 val;
-
- /* Initially disable FPC */
- val = CCDC_FPC_DISABLE;
- regw(val, CCDC_FPC);
-
- if (!fpc->enable)
- return;
-
- /* Configure Fault pixel if needed */
- regw(fpc->fpc_table_addr, CCDC_FPC_ADDR);
- dev_dbg(ccdc_cfg.dev, "\nWriting 0x%lx to FPC_ADDR...\n",
- (fpc->fpc_table_addr));
- /* Write the FPC params with FPC disable */
- val = fpc->fp_num & CCDC_FPC_FPC_NUM_MASK;
- regw(val, CCDC_FPC);
-
- dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FPC...\n", val);
- /* read the FPC register */
- val = regr(CCDC_FPC) | CCDC_FPC_ENABLE;
- regw(val, CCDC_FPC);
- dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FPC...\n", val);
-}
-
/*
* ccdc_config_raw()
* This function will configure CCDC for Raw capture mode
@@ -569,9 +428,6 @@
/* Configure Black level compensation */
ccdc_config_black_compense(&config_params->blk_comp);
- /* Configure Fault Pixel Correction */
- ccdc_config_fpc(&config_params->fault_pxl);
-
/* If data size is 8 bit then pack the data */
if ((config_params->data_sz == CCDC_DATA_8BITS) ||
config_params->alaw.enable)
@@ -929,7 +785,6 @@
.reset = ccdc_sbl_reset,
.enable = ccdc_enable,
.set_hw_if_params = ccdc_set_hw_if_params,
- .set_params = ccdc_set_params,
.configure = ccdc_configure,
.set_buftype = ccdc_set_buftype,
.get_buftype = ccdc_get_buftype,
diff --git a/drivers/media/platform/davinci/vpfe_capture.c b/drivers/media/platform/davinci/vpfe_capture.c
index e3fe3e0..b1bf4a7 100644
--- a/drivers/media/platform/davinci/vpfe_capture.c
+++ b/drivers/media/platform/davinci/vpfe_capture.c
@@ -281,45 +281,6 @@
EXPORT_SYMBOL(vpfe_unregister_ccdc_device);
/*
- * vpfe_get_ccdc_image_format - Get image parameters based on CCDC settings
- */
-static int vpfe_get_ccdc_image_format(struct vpfe_device *vpfe_dev,
- struct v4l2_format *f)
-{
- struct v4l2_rect image_win;
- enum ccdc_buftype buf_type;
- enum ccdc_frmfmt frm_fmt;
-
- memset(f, 0, sizeof(*f));
- f->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
- ccdc_dev->hw_ops.get_image_window(&image_win);
- f->fmt.pix.width = image_win.width;
- f->fmt.pix.height = image_win.height;
- f->fmt.pix.bytesperline = ccdc_dev->hw_ops.get_line_length();
- f->fmt.pix.sizeimage = f->fmt.pix.bytesperline *
- f->fmt.pix.height;
- buf_type = ccdc_dev->hw_ops.get_buftype();
- f->fmt.pix.pixelformat = ccdc_dev->hw_ops.get_pixel_format();
- frm_fmt = ccdc_dev->hw_ops.get_frame_format();
- if (frm_fmt == CCDC_FRMFMT_PROGRESSIVE)
- f->fmt.pix.field = V4L2_FIELD_NONE;
- else if (frm_fmt == CCDC_FRMFMT_INTERLACED) {
- if (buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED)
- f->fmt.pix.field = V4L2_FIELD_INTERLACED;
- else if (buf_type == CCDC_BUFTYPE_FLD_SEPARATED)
- f->fmt.pix.field = V4L2_FIELD_SEQ_TB;
- else {
- v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf_type\n");
- return -EINVAL;
- }
- } else {
- v4l2_err(&vpfe_dev->v4l2_dev, "Invalid frm_fmt\n");
- return -EINVAL;
- }
- return 0;
-}
-
-/*
* vpfe_config_ccdc_image_format()
* For a pix format, configure ccdc to setup the capture
*/
@@ -1697,59 +1658,6 @@
return ret;
}
-
-static long vpfe_param_handler(struct file *file, void *priv,
- bool valid_prio, unsigned int cmd, void *param)
-{
- struct vpfe_device *vpfe_dev = video_drvdata(file);
- int ret;
-
- v4l2_dbg(2, debug, &vpfe_dev->v4l2_dev, "vpfe_param_handler\n");
-
- if (vpfe_dev->started) {
- /* only allowed if streaming is not started */
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
- "device already started\n");
- return -EBUSY;
- }
-
- ret = mutex_lock_interruptible(&vpfe_dev->lock);
- if (ret)
- return ret;
-
- switch (cmd) {
- case VPFE_CMD_S_CCDC_RAW_PARAMS:
- v4l2_warn(&vpfe_dev->v4l2_dev,
- "VPFE_CMD_S_CCDC_RAW_PARAMS: experimental ioctl\n");
- if (ccdc_dev->hw_ops.set_params) {
- ret = ccdc_dev->hw_ops.set_params(param);
- if (ret) {
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
- "Error setting parameters in CCDC\n");
- goto unlock_out;
- }
- ret = vpfe_get_ccdc_image_format(vpfe_dev,
- &vpfe_dev->fmt);
- if (ret < 0) {
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
- "Invalid image format at CCDC\n");
- goto unlock_out;
- }
- } else {
- ret = -EINVAL;
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
- "VPFE_CMD_S_CCDC_RAW_PARAMS not supported\n");
- }
- break;
- default:
- ret = -ENOTTY;
- }
-unlock_out:
- mutex_unlock(&vpfe_dev->lock);
- return ret;
-}
-
-
/* vpfe capture ioctl operations */
static const struct v4l2_ioctl_ops vpfe_ioctl_ops = {
.vidioc_querycap = vpfe_querycap,
@@ -1772,7 +1680,6 @@
.vidioc_cropcap = vpfe_cropcap,
.vidioc_g_selection = vpfe_g_selection,
.vidioc_s_selection = vpfe_s_selection,
- .vidioc_default = vpfe_param_handler,
};
static struct vpfe_device *vpfe_initialize(void)
diff --git a/drivers/media/platform/davinci/vpif_capture.c b/drivers/media/platform/davinci/vpif_capture.c
index d78580f..4be6554 100644
--- a/drivers/media/platform/davinci/vpif_capture.c
+++ b/drivers/media/platform/davinci/vpif_capture.c
@@ -1719,7 +1719,6 @@
*/
static int vpif_remove(struct platform_device *device)
{
- struct common_obj *common;
struct channel_obj *ch;
int i;
@@ -1730,7 +1729,6 @@
for (i = 0; i < VPIF_CAPTURE_MAX_DEVICES; i++) {
/* Get the pointer to the channel object */
ch = vpif_obj.dev[i];
- common = &ch->common[VPIF_VIDEO_INDEX];
/* Unregister video device */
video_unregister_device(&ch->video_dev);
kfree(vpif_obj.dev[i]);
diff --git a/drivers/media/platform/davinci/vpif_display.c b/drivers/media/platform/davinci/vpif_display.c
index b5ac6ce..bf982bf 100644
--- a/drivers/media/platform/davinci/vpif_display.c
+++ b/drivers/media/platform/davinci/vpif_display.c
@@ -1339,7 +1339,6 @@
*/
static int vpif_remove(struct platform_device *device)
{
- struct common_obj *common;
struct channel_obj *ch;
int i;
@@ -1350,7 +1349,6 @@
for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++) {
/* Get the pointer to the channel object */
ch = vpif_obj.dev[i];
- common = &ch->common[VPIF_VIDEO_INDEX];
/* Unregister video device */
video_unregister_device(&ch->video_dev);
kfree(vpif_obj.dev[i]);
diff --git a/drivers/media/platform/omap/omap_vout_vrfb.c b/drivers/media/platform/omap/omap_vout_vrfb.c
index 92c4e18..45a553d 100644
--- a/drivers/media/platform/omap/omap_vout_vrfb.c
+++ b/drivers/media/platform/omap/omap_vout_vrfb.c
@@ -16,7 +16,6 @@
#include <media/videobuf-dma-contig.h>
#include <media/v4l2-device.h>
-#include <linux/omap-dma.h>
#include <video/omapvrfb.h>
#include "omap_voutdef.h"
@@ -63,7 +62,7 @@
/*
* Wakes up the application once the DMA transfer to VRFB space is completed.
*/
-static void omap_vout_vrfb_dma_tx_callback(int lch, u16 ch_status, void *data)
+static void omap_vout_vrfb_dma_tx_callback(void *data)
{
struct vid_vrfb_dma *t = (struct vid_vrfb_dma *) data;
@@ -94,6 +93,7 @@
int ret = 0, i, j;
struct omap_vout_device *vout;
struct video_device *vfd;
+ dma_cap_mask_t mask;
int image_width, image_height;
int vrfb_num_bufs = VRFB_NUM_BUFS;
struct v4l2_device *v4l2_dev = platform_get_drvdata(pdev);
@@ -131,18 +131,27 @@
/*
* Request and Initialize DMA, for DMA based VRFB transfer
*/
- vout->vrfb_dma_tx.dev_id = OMAP_DMA_NO_DEVICE;
- vout->vrfb_dma_tx.dma_ch = -1;
- vout->vrfb_dma_tx.req_status = DMA_CHAN_ALLOTED;
- ret = omap_request_dma(vout->vrfb_dma_tx.dev_id, "VRFB DMA TX",
- omap_vout_vrfb_dma_tx_callback,
- (void *) &vout->vrfb_dma_tx, &vout->vrfb_dma_tx.dma_ch);
- if (ret < 0) {
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_INTERLEAVE, mask);
+ vout->vrfb_dma_tx.chan = dma_request_chan_by_mask(&mask);
+ if (IS_ERR(vout->vrfb_dma_tx.chan)) {
vout->vrfb_dma_tx.req_status = DMA_CHAN_NOT_ALLOTED;
+ } else {
+ size_t xt_size = sizeof(struct dma_interleaved_template) +
+ sizeof(struct data_chunk);
+
+ vout->vrfb_dma_tx.xt = kzalloc(xt_size, GFP_KERNEL);
+ if (!vout->vrfb_dma_tx.xt) {
+ dma_release_channel(vout->vrfb_dma_tx.chan);
+ vout->vrfb_dma_tx.req_status = DMA_CHAN_NOT_ALLOTED;
+ }
+ }
+
+ if (vout->vrfb_dma_tx.req_status == DMA_CHAN_NOT_ALLOTED)
dev_info(&pdev->dev,
": failed to allocate DMA Channel for video%d\n",
vfd->minor);
- }
+
init_waitqueue_head(&vout->vrfb_dma_tx.wait);
/* statically allocated the VRFB buffer is done through
@@ -177,7 +186,9 @@
if (vout->vrfb_dma_tx.req_status == DMA_CHAN_ALLOTED) {
vout->vrfb_dma_tx.req_status = DMA_CHAN_NOT_ALLOTED;
- omap_free_dma(vout->vrfb_dma_tx.dma_ch);
+ kfree(vout->vrfb_dma_tx.xt);
+ dmaengine_terminate_sync(vout->vrfb_dma_tx.chan);
+ dma_release_channel(vout->vrfb_dma_tx.chan);
}
}
@@ -219,70 +230,84 @@
}
int omap_vout_prepare_vrfb(struct omap_vout_device *vout,
- struct videobuf_buffer *vb)
+ struct videobuf_buffer *vb)
{
- dma_addr_t dmabuf;
- struct vid_vrfb_dma *tx;
+ struct dma_async_tx_descriptor *tx;
+ enum dma_ctrl_flags flags;
+ struct dma_chan *chan = vout->vrfb_dma_tx.chan;
+ struct dma_device *dmadev = chan->device;
+ struct dma_interleaved_template *xt = vout->vrfb_dma_tx.xt;
+ dma_cookie_t cookie;
+ enum dma_status status;
enum dss_rotation rotation;
- u32 dest_frame_index = 0, src_element_index = 0;
- u32 dest_element_index = 0, src_frame_index = 0;
- u32 elem_count = 0, frame_count = 0, pixsize = 2;
+ size_t dst_icg;
+ u32 pixsize;
if (!is_rotation_enabled(vout))
return 0;
- dmabuf = vout->buf_phy_addr[vb->i];
/* If rotation is enabled, copy input buffer into VRFB
* memory space using DMA. We are copying input buffer
* into VRFB memory space of desired angle and DSS will
* read image VRFB memory for 0 degree angle
*/
+
pixsize = vout->bpp * vout->vrfb_bpp;
- /*
- * DMA transfer in double index mode
- */
+ dst_icg = ((MAX_PIXELS_PER_LINE * pixsize) -
+ (vout->pix.width * vout->bpp)) + 1;
- /* Frame index */
- dest_frame_index = ((MAX_PIXELS_PER_LINE * pixsize) -
- (vout->pix.width * vout->bpp)) + 1;
+ xt->src_start = vout->buf_phy_addr[vb->i];
+ xt->dst_start = vout->vrfb_context[vb->i].paddr[0];
- /* Source and destination parameters */
- src_element_index = 0;
- src_frame_index = 0;
- dest_element_index = 1;
- /* Number of elements per frame */
- elem_count = vout->pix.width * vout->bpp;
- frame_count = vout->pix.height;
- tx = &vout->vrfb_dma_tx;
- tx->tx_status = 0;
- omap_set_dma_transfer_params(tx->dma_ch, OMAP_DMA_DATA_TYPE_S32,
- (elem_count / 4), frame_count, OMAP_DMA_SYNC_ELEMENT,
- tx->dev_id, 0x0);
- /* src_port required only for OMAP1 */
- omap_set_dma_src_params(tx->dma_ch, 0, OMAP_DMA_AMODE_POST_INC,
- dmabuf, src_element_index, src_frame_index);
- /*set dma source burst mode for VRFB */
- omap_set_dma_src_burst_mode(tx->dma_ch, OMAP_DMA_DATA_BURST_16);
- rotation = calc_rotation(vout);
+ xt->numf = vout->pix.height;
+ xt->frame_size = 1;
+ xt->sgl[0].size = vout->pix.width * vout->bpp;
+ xt->sgl[0].icg = dst_icg;
- /* dest_port required only for OMAP1 */
- omap_set_dma_dest_params(tx->dma_ch, 0, OMAP_DMA_AMODE_DOUBLE_IDX,
- vout->vrfb_context[vb->i].paddr[0], dest_element_index,
- dest_frame_index);
- /*set dma dest burst mode for VRFB */
- omap_set_dma_dest_burst_mode(tx->dma_ch, OMAP_DMA_DATA_BURST_16);
- omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE, 0x20, 0);
+ xt->dir = DMA_MEM_TO_MEM;
+ xt->src_sgl = false;
+ xt->src_inc = true;
+ xt->dst_sgl = true;
+ xt->dst_inc = true;
- omap_start_dma(tx->dma_ch);
- wait_event_interruptible_timeout(tx->wait, tx->tx_status == 1,
- VRFB_TX_TIMEOUT);
-
- if (tx->tx_status == 0) {
- omap_stop_dma(tx->dma_ch);
+ tx = dmadev->device_prep_interleaved_dma(chan, xt, flags);
+ if (tx == NULL) {
+ pr_err("%s: DMA interleaved prep error\n", __func__);
return -EINVAL;
}
+
+ tx->callback = omap_vout_vrfb_dma_tx_callback;
+ tx->callback_param = &vout->vrfb_dma_tx;
+
+ cookie = dmaengine_submit(tx);
+ if (dma_submit_error(cookie)) {
+ pr_err("%s: dmaengine_submit failed (%d)\n", __func__, cookie);
+ return -EINVAL;
+ }
+
+ vout->vrfb_dma_tx.tx_status = 0;
+ dma_async_issue_pending(chan);
+
+ wait_event_interruptible_timeout(vout->vrfb_dma_tx.wait,
+ vout->vrfb_dma_tx.tx_status == 1,
+ VRFB_TX_TIMEOUT);
+
+ status = dma_async_is_tx_complete(chan, cookie, NULL, NULL);
+
+ if (vout->vrfb_dma_tx.tx_status == 0) {
+ pr_err("%s: Timeout while waiting for DMA\n", __func__);
+ dmaengine_terminate_sync(chan);
+ return -EINVAL;
+ } else if (status != DMA_COMPLETE) {
+ pr_err("%s: DMA completion %s status\n", __func__,
+ status == DMA_ERROR ? "error" : "busy");
+ dmaengine_terminate_sync(chan);
+ return -EINVAL;
+ }
+
/* Store buffers physical address into an array. Addresses
* from this array will be used to configure DSS */
+ rotation = calc_rotation(vout);
vout->queued_buf_addr[vb->i] = (u8 *)
vout->vrfb_context[vb->i].paddr[rotation];
return 0;
diff --git a/drivers/media/platform/omap/omap_voutdef.h b/drivers/media/platform/omap/omap_voutdef.h
index 80c79fa..56b630b 100644
--- a/drivers/media/platform/omap/omap_voutdef.h
+++ b/drivers/media/platform/omap/omap_voutdef.h
@@ -14,6 +14,7 @@
#include <media/v4l2-ctrls.h>
#include <video/omapfb_dss.h>
#include <video/omapvrfb.h>
+#include <linux/dmaengine.h>
#define YUYV_BPP 2
#define RGB565_BPP 2
@@ -81,8 +82,9 @@
* for VRFB hidden buffer
*/
struct vid_vrfb_dma {
- int dev_id;
- int dma_ch;
+ struct dma_chan *chan;
+ struct dma_interleaved_template *xt;
+
int req_status;
int tx_status;
wait_queue_head_t wait;
diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
index 776d2ba..41eef37 100644
--- a/drivers/media/platform/qcom/venus/core.c
+++ b/drivers/media/platform/qcom/venus/core.c
@@ -76,7 +76,7 @@
hfi_core_deinit(core, true);
hfi_destroy(core);
mutex_lock(&core->lock);
- venus_shutdown(&core->dev_fw);
+ venus_shutdown(core->dev);
pm_runtime_put_sync(core->dev);
@@ -84,7 +84,7 @@
pm_runtime_get_sync(core->dev);
- ret |= venus_boot(core->dev, &core->dev_fw, core->res->fwname);
+ ret |= venus_boot(core->dev, core->res->fwname);
ret |= hfi_core_resume(core, true);
@@ -137,7 +137,7 @@
return 0;
err:
- while (--i)
+ while (i--)
clk_disable_unprepare(core->clks[i]);
return ret;
@@ -207,7 +207,7 @@
if (ret < 0)
goto err_runtime_disable;
- ret = venus_boot(dev, &core->dev_fw, core->res->fwname);
+ ret = venus_boot(dev, core->res->fwname);
if (ret)
goto err_runtime_disable;
@@ -238,7 +238,7 @@
err_core_deinit:
hfi_core_deinit(core, false);
err_venus_shutdown:
- venus_shutdown(&core->dev_fw);
+ venus_shutdown(dev);
err_runtime_disable:
pm_runtime_set_suspended(dev);
pm_runtime_disable(dev);
@@ -259,7 +259,7 @@
WARN_ON(ret);
hfi_destroy(core);
- venus_shutdown(&core->dev_fw);
+ venus_shutdown(dev);
of_platform_depopulate(dev);
pm_runtime_put_sync(dev);
@@ -270,8 +270,7 @@
return ret;
}
-#ifdef CONFIG_PM
-static int venus_runtime_suspend(struct device *dev)
+static __maybe_unused int venus_runtime_suspend(struct device *dev)
{
struct venus_core *core = dev_get_drvdata(dev);
int ret;
@@ -283,7 +282,7 @@
return ret;
}
-static int venus_runtime_resume(struct device *dev)
+static __maybe_unused int venus_runtime_resume(struct device *dev)
{
struct venus_core *core = dev_get_drvdata(dev);
int ret;
@@ -302,7 +301,6 @@
venus_clks_disable(core);
return ret;
}
-#endif
static const struct dev_pm_ops venus_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
diff --git a/drivers/media/platform/qcom/venus/core.h b/drivers/media/platform/qcom/venus/core.h
index e542700..cba092b 100644
--- a/drivers/media/platform/qcom/venus/core.h
+++ b/drivers/media/platform/qcom/venus/core.h
@@ -101,7 +101,6 @@
struct device *dev;
struct device *dev_dec;
struct device *dev_enc;
- struct device dev_fw;
struct mutex lock;
struct list_head instances;
atomic_t insts_count;
diff --git a/drivers/media/platform/qcom/venus/firmware.c b/drivers/media/platform/qcom/venus/firmware.c
index 1b1a4f3..521d4b3 100644
--- a/drivers/media/platform/qcom/venus/firmware.c
+++ b/drivers/media/platform/qcom/venus/firmware.c
@@ -12,97 +12,87 @@
*
*/
-#include <linux/dma-mapping.h>
+#include <linux/device.h>
#include <linux/firmware.h>
#include <linux/kernel.h>
+#include <linux/io.h>
#include <linux/of.h>
-#include <linux/of_reserved_mem.h>
-#include <linux/slab.h>
+#include <linux/of_address.h>
#include <linux/qcom_scm.h>
+#include <linux/sizes.h>
#include <linux/soc/qcom/mdt_loader.h>
#include "firmware.h"
#define VENUS_PAS_ID 9
-#define VENUS_FW_MEM_SIZE SZ_8M
+#define VENUS_FW_MEM_SIZE (6 * SZ_1M)
-static void device_release_dummy(struct device *dev)
-{
- of_reserved_mem_device_release(dev);
-}
-
-int venus_boot(struct device *parent, struct device *fw_dev, const char *fwname)
+int venus_boot(struct device *dev, const char *fwname)
{
const struct firmware *mdt;
+ struct device_node *node;
phys_addr_t mem_phys;
+ struct resource r;
ssize_t fw_size;
size_t mem_size;
void *mem_va;
int ret;
- if (!qcom_scm_is_available())
+ if (!IS_ENABLED(CONFIG_QCOM_MDT_LOADER) || !qcom_scm_is_available())
return -EPROBE_DEFER;
- fw_dev->parent = parent;
- fw_dev->release = device_release_dummy;
-
- ret = dev_set_name(fw_dev, "%s:%s", dev_name(parent), "firmware");
- if (ret)
- return ret;
-
- ret = device_register(fw_dev);
- if (ret < 0)
- return ret;
-
- ret = of_reserved_mem_device_init_by_idx(fw_dev, parent->of_node, 0);
- if (ret)
- goto err_unreg_device;
-
- mem_size = VENUS_FW_MEM_SIZE;
-
- mem_va = dmam_alloc_coherent(fw_dev, mem_size, &mem_phys, GFP_KERNEL);
- if (!mem_va) {
- ret = -ENOMEM;
- goto err_unreg_device;
+ node = of_parse_phandle(dev->of_node, "memory-region", 0);
+ if (!node) {
+ dev_err(dev, "no memory-region specified\n");
+ return -EINVAL;
}
- ret = request_firmware(&mdt, fwname, fw_dev);
+ ret = of_address_to_resource(node, 0, &r);
+ if (ret)
+ return ret;
+
+ mem_phys = r.start;
+ mem_size = resource_size(&r);
+
+ if (mem_size < VENUS_FW_MEM_SIZE)
+ return -EINVAL;
+
+ mem_va = memremap(r.start, mem_size, MEMREMAP_WC);
+ if (!mem_va) {
+ dev_err(dev, "unable to map memory region: %pa+%zx\n",
+ &r.start, mem_size);
+ return -ENOMEM;
+ }
+
+ ret = request_firmware(&mdt, fwname, dev);
if (ret < 0)
- goto err_unreg_device;
+ goto err_unmap;
fw_size = qcom_mdt_get_size(mdt);
if (fw_size < 0) {
ret = fw_size;
release_firmware(mdt);
- goto err_unreg_device;
+ goto err_unmap;
}
- ret = qcom_mdt_load(fw_dev, mdt, fwname, VENUS_PAS_ID, mem_va, mem_phys,
+ ret = qcom_mdt_load(dev, mdt, fwname, VENUS_PAS_ID, mem_va, mem_phys,
mem_size);
release_firmware(mdt);
if (ret)
- goto err_unreg_device;
+ goto err_unmap;
ret = qcom_scm_pas_auth_and_reset(VENUS_PAS_ID);
if (ret)
- goto err_unreg_device;
+ goto err_unmap;
- return 0;
-
-err_unreg_device:
- device_unregister(fw_dev);
+err_unmap:
+ memunmap(mem_va);
return ret;
}
-int venus_shutdown(struct device *fw_dev)
+int venus_shutdown(struct device *dev)
{
- int ret;
-
- ret = qcom_scm_pas_shutdown(VENUS_PAS_ID);
- device_unregister(fw_dev);
- memset(fw_dev, 0, sizeof(*fw_dev));
-
- return ret;
+ return qcom_scm_pas_shutdown(VENUS_PAS_ID);
}
diff --git a/drivers/media/platform/qcom/venus/firmware.h b/drivers/media/platform/qcom/venus/firmware.h
index f81a989..428efb5 100644
--- a/drivers/media/platform/qcom/venus/firmware.h
+++ b/drivers/media/platform/qcom/venus/firmware.h
@@ -16,8 +16,7 @@
struct device;
-int venus_boot(struct device *parent, struct device *fw_dev,
- const char *fwname);
-int venus_shutdown(struct device *fw_dev);
+int venus_boot(struct device *dev, const char *fwname);
+int venus_shutdown(struct device *dev);
#endif
diff --git a/drivers/media/platform/qcom/venus/hfi_msgs.c b/drivers/media/platform/qcom/venus/hfi_msgs.c
index f884171..a681ae5 100644
--- a/drivers/media/platform/qcom/venus/hfi_msgs.c
+++ b/drivers/media/platform/qcom/venus/hfi_msgs.c
@@ -239,11 +239,12 @@
break;
}
- if (!error) {
- rem_bytes -= read_bytes;
- data += read_bytes;
- num_properties--;
- }
+ if (error)
+ break;
+
+ rem_bytes -= read_bytes;
+ data += read_bytes;
+ num_properties--;
}
err_no_prop:
diff --git a/drivers/media/platform/sti/bdisp/bdisp-debug.c b/drivers/media/platform/sti/bdisp/bdisp-debug.c
index 7af6686..2cc289e 100644
--- a/drivers/media/platform/sti/bdisp/bdisp-debug.c
+++ b/drivers/media/platform/sti/bdisp/bdisp-debug.c
@@ -104,7 +104,7 @@
if (val & BLT_INS_IRQ)
seq_puts(s, "IRQ - ");
- seq_puts(s, "\n");
+ seq_putc(s, '\n');
}
static void bdisp_dbg_dump_tty(struct seq_file *s, u32 val)
@@ -153,7 +153,7 @@
if (val & BLT_TTY_BIG_END)
seq_puts(s, "BigEndian - ");
- seq_puts(s, "\n");
+ seq_putc(s, '\n');
}
static void bdisp_dbg_dump_xy(struct seq_file *s, u32 val, char *name)
@@ -230,7 +230,7 @@
seq_puts(s, "BigEndian - ");
done:
- seq_puts(s, "\n");
+ seq_putc(s, '\n');
}
static void bdisp_dbg_dump_fctl(struct seq_file *s, u32 val)
@@ -247,7 +247,7 @@
else if ((val & BLT_FCTL_HV_SCALE) == BLT_FCTL_HV_SAMPLE)
seq_puts(s, "Sample Chroma");
- seq_puts(s, "\n");
+ seq_putc(s, '\n');
}
static void bdisp_dbg_dump_rsf(struct seq_file *s, u32 val, char *name)
@@ -266,7 +266,7 @@
seq_printf(s, "V: %d(6.10) / scale~%dx0.1", inc, 1024 * 10 / inc);
done:
- seq_puts(s, "\n");
+ seq_putc(s, '\n');
}
static void bdisp_dbg_dump_rzi(struct seq_file *s, u32 val, char *name)
@@ -281,7 +281,7 @@
seq_printf(s, "V: init=%d repeat=%d", val & 0x3FF, (val >> 12) & 7);
done:
- seq_puts(s, "\n");
+ seq_putc(s, '\n');
}
static void bdisp_dbg_dump_ivmx(struct seq_file *s,
@@ -293,7 +293,7 @@
seq_printf(s, "IVMX3\t0x%08X\t", c3);
if (!c0 && !c1 && !c2 && !c3) {
- seq_puts(s, "\n");
+ seq_putc(s, '\n');
return;
}
diff --git a/drivers/media/platform/vimc/vimc-capture.c b/drivers/media/platform/vimc/vimc-capture.c
index 14cb32e..88a1e56 100644
--- a/drivers/media/platform/vimc/vimc-capture.c
+++ b/drivers/media/platform/vimc/vimc-capture.c
@@ -517,14 +517,6 @@
return 0;
}
-static struct platform_driver vimc_cap_pdrv = {
- .probe = vimc_cap_probe,
- .remove = vimc_cap_remove,
- .driver = {
- .name = VIMC_CAP_DRV_NAME,
- },
-};
-
static const struct platform_device_id vimc_cap_driver_ids[] = {
{
.name = VIMC_CAP_DRV_NAME,
@@ -532,6 +524,15 @@
{ }
};
+static struct platform_driver vimc_cap_pdrv = {
+ .probe = vimc_cap_probe,
+ .remove = vimc_cap_remove,
+ .id_table = vimc_cap_driver_ids,
+ .driver = {
+ .name = VIMC_CAP_DRV_NAME,
+ },
+};
+
module_platform_driver(vimc_cap_pdrv);
MODULE_DEVICE_TABLE(platform, vimc_cap_driver_ids);
diff --git a/drivers/media/platform/vimc/vimc-debayer.c b/drivers/media/platform/vimc/vimc-debayer.c
index 35b15bd..033a131 100644
--- a/drivers/media/platform/vimc/vimc-debayer.c
+++ b/drivers/media/platform/vimc/vimc-debayer.c
@@ -577,14 +577,6 @@
return 0;
}
-static struct platform_driver vimc_deb_pdrv = {
- .probe = vimc_deb_probe,
- .remove = vimc_deb_remove,
- .driver = {
- .name = VIMC_DEB_DRV_NAME,
- },
-};
-
static const struct platform_device_id vimc_deb_driver_ids[] = {
{
.name = VIMC_DEB_DRV_NAME,
@@ -592,6 +584,15 @@
{ }
};
+static struct platform_driver vimc_deb_pdrv = {
+ .probe = vimc_deb_probe,
+ .remove = vimc_deb_remove,
+ .id_table = vimc_deb_driver_ids,
+ .driver = {
+ .name = VIMC_DEB_DRV_NAME,
+ },
+};
+
module_platform_driver(vimc_deb_pdrv);
MODULE_DEVICE_TABLE(platform, vimc_deb_driver_ids);
diff --git a/drivers/media/platform/vimc/vimc-scaler.c b/drivers/media/platform/vimc/vimc-scaler.c
index fe77505..0a3e086 100644
--- a/drivers/media/platform/vimc/vimc-scaler.c
+++ b/drivers/media/platform/vimc/vimc-scaler.c
@@ -431,14 +431,6 @@
return 0;
}
-static struct platform_driver vimc_sca_pdrv = {
- .probe = vimc_sca_probe,
- .remove = vimc_sca_remove,
- .driver = {
- .name = VIMC_SCA_DRV_NAME,
- },
-};
-
static const struct platform_device_id vimc_sca_driver_ids[] = {
{
.name = VIMC_SCA_DRV_NAME,
@@ -446,6 +438,15 @@
{ }
};
+static struct platform_driver vimc_sca_pdrv = {
+ .probe = vimc_sca_probe,
+ .remove = vimc_sca_remove,
+ .id_table = vimc_sca_driver_ids,
+ .driver = {
+ .name = VIMC_SCA_DRV_NAME,
+ },
+};
+
module_platform_driver(vimc_sca_pdrv);
MODULE_DEVICE_TABLE(platform, vimc_sca_driver_ids);
diff --git a/drivers/media/platform/vimc/vimc-sensor.c b/drivers/media/platform/vimc/vimc-sensor.c
index ebdbbe8..615c2b1 100644
--- a/drivers/media/platform/vimc/vimc-sensor.c
+++ b/drivers/media/platform/vimc/vimc-sensor.c
@@ -365,14 +365,6 @@
return 0;
}
-static struct platform_driver vimc_sen_pdrv = {
- .probe = vimc_sen_probe,
- .remove = vimc_sen_remove,
- .driver = {
- .name = VIMC_SEN_DRV_NAME,
- },
-};
-
static const struct platform_device_id vimc_sen_driver_ids[] = {
{
.name = VIMC_SEN_DRV_NAME,
@@ -380,6 +372,15 @@
{ }
};
+static struct platform_driver vimc_sen_pdrv = {
+ .probe = vimc_sen_probe,
+ .remove = vimc_sen_remove,
+ .id_table = vimc_sen_driver_ids,
+ .driver = {
+ .name = VIMC_SEN_DRV_NAME,
+ },
+};
+
module_platform_driver(vimc_sen_pdrv);
MODULE_DEVICE_TABLE(platform, vimc_sen_driver_ids);
diff --git a/drivers/media/radio/radio-wl1273.c b/drivers/media/radio/radio-wl1273.c
index 7240223..17e82a9 100644
--- a/drivers/media/radio/radio-wl1273.c
+++ b/drivers/media/radio/radio-wl1273.c
@@ -610,10 +610,21 @@
}
}
- if (radio->rds_on)
+ if (radio->rds_on) {
r = core->write(core, WL1273_RDS_DATA_ENB, 1);
- else
+ if (r) {
+ dev_err(dev, "%s: RDS_DATA_ENB ON fails\n",
+ __func__);
+ goto fail;
+ }
+ } else {
r = core->write(core, WL1273_RDS_DATA_ENB, 0);
+ if (r) {
+ dev_err(dev, "%s: RDS_DATA_ENB OFF fails\n",
+ __func__);
+ goto fail;
+ }
+ }
} else {
dev_warn(dev, "%s: Illegal mode.\n", __func__);
}
diff --git a/drivers/media/rc/ir-lirc-codec.c b/drivers/media/rc/ir-lirc-codec.c
index a30af91..d2223c0 100644
--- a/drivers/media/rc/ir-lirc-codec.c
+++ b/drivers/media/rc/ir-lirc-codec.c
@@ -266,7 +266,7 @@
if (!dev->rx_resolution)
return -ENOTTY;
- val = dev->rx_resolution;
+ val = dev->rx_resolution / 1000;
break;
case LIRC_SET_WIDEBAND_RECEIVER:
diff --git a/drivers/media/tuners/fc0011.c b/drivers/media/tuners/fc0011.c
index 192b1c7..145407d 100644
--- a/drivers/media/tuners/fc0011.c
+++ b/drivers/media/tuners/fc0011.c
@@ -342,6 +342,7 @@
switch (vco_sel) {
default:
WARN_ON(1);
+ return -EINVAL;
case 0:
if (vco_cal < 8) {
regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
diff --git a/drivers/media/tuners/mxl5005s.c b/drivers/media/tuners/mxl5005s.c
index 353744f..dd59c2c 100644
--- a/drivers/media/tuners/mxl5005s.c
+++ b/drivers/media/tuners/mxl5005s.c
@@ -2737,8 +2737,6 @@
status += MXL_ControlWrite(fe, TG_LO_DIVVAL, 0x0);
status += MXL_ControlWrite(fe, TG_LO_SELVAL, 0x7);
divider_val = 2 ;
- Fmax = FmaxBin ;
- Fmin = FminBin ;
}
/* TG_DIV_VAL */
diff --git a/drivers/media/usb/au0828/au0828-input.c b/drivers/media/usb/au0828/au0828-input.c
index 9ec919c..9d82ec0 100644
--- a/drivers/media/usb/au0828/au0828-input.c
+++ b/drivers/media/usb/au0828/au0828-input.c
@@ -351,7 +351,7 @@
if (err)
goto error;
- pr_info("Remote controller %s initalized\n", ir->name);
+ pr_info("Remote controller %s initialized\n", ir->name);
return 0;
diff --git a/drivers/media/usb/dvb-usb-v2/lmedm04.c b/drivers/media/usb/dvb-usb-v2/lmedm04.c
index 594360a..a91fdad 100644
--- a/drivers/media/usb/dvb-usb-v2/lmedm04.c
+++ b/drivers/media/usb/dvb-usb-v2/lmedm04.c
@@ -207,15 +207,13 @@
struct lme2510_state *st = d->priv;
u8 all_pids[] = LME_ALL_PIDS;
u8 stream_on[] = LME_ST_ON_W;
- int ret;
u8 rbuff[1];
if (st->pid_off)
- ret = lme2510_usb_talk(d, all_pids, sizeof(all_pids),
- rbuff, sizeof(rbuff));
+ lme2510_usb_talk(d, all_pids, sizeof(all_pids),
+ rbuff, sizeof(rbuff));
/*Restart Stream Command*/
- ret = lme2510_usb_talk(d, stream_on, sizeof(stream_on),
- rbuff, sizeof(rbuff));
- return ret;
+ return lme2510_usb_talk(d, stream_on, sizeof(stream_on),
+ rbuff, sizeof(rbuff));
}
static int lme2510_enable_pid(struct dvb_usb_device *d, u8 index, u16 pid_out)
diff --git a/drivers/media/usb/dvb-usb/dib0700_core.c b/drivers/media/usb/dvb-usb/dib0700_core.c
index 08acdd3..bea1b47 100644
--- a/drivers/media/usb/dvb-usb/dib0700_core.c
+++ b/drivers/media/usb/dvb-usb/dib0700_core.c
@@ -215,13 +215,14 @@
USB_CTRL_GET_TIMEOUT);
if (result < 0) {
deb_info("i2c read error (status = %d)\n", result);
- break;
+ goto unlock;
}
if (msg[i].len > sizeof(st->buf)) {
deb_info("buffer too small to fit %d bytes\n",
msg[i].len);
- return -EIO;
+ result = -EIO;
+ goto unlock;
}
memcpy(msg[i].buf, st->buf, msg[i].len);
@@ -233,8 +234,8 @@
/* Write request */
if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
err("could not acquire lock");
- mutex_unlock(&d->i2c_mutex);
- return -EINTR;
+ result = -EINTR;
+ goto unlock;
}
st->buf[0] = REQUEST_NEW_I2C_WRITE;
st->buf[1] = msg[i].addr << 1;
@@ -247,7 +248,9 @@
if (msg[i].len > sizeof(st->buf) - 4) {
deb_info("i2c message to big: %d\n",
msg[i].len);
- return -EIO;
+ mutex_unlock(&d->usb_mutex);
+ result = -EIO;
+ goto unlock;
}
/* The Actual i2c payload */
@@ -269,8 +272,11 @@
}
}
}
+ result = i;
+
+unlock:
mutex_unlock(&d->i2c_mutex);
- return i;
+ return result;
}
/*
@@ -281,7 +287,7 @@
{
struct dvb_usb_device *d = i2c_get_adapdata(adap);
struct dib0700_state *st = d->priv;
- int i,len;
+ int i, len, result;
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
return -EINTR;
@@ -298,7 +304,8 @@
if (msg[i].len > sizeof(st->buf) - 2) {
deb_info("i2c xfer to big: %d\n",
msg[i].len);
- return -EIO;
+ result = -EIO;
+ goto unlock;
}
memcpy(&st->buf[2], msg[i].buf, msg[i].len);
@@ -313,13 +320,15 @@
if (len <= 0) {
deb_info("I2C read failed on address 0x%02x\n",
msg[i].addr);
- break;
+ result = -EIO;
+ goto unlock;
}
if (msg[i + 1].len > sizeof(st->buf)) {
deb_info("i2c xfer buffer to small for %d\n",
msg[i].len);
- return -EIO;
+ result = -EIO;
+ goto unlock;
}
memcpy(msg[i + 1].buf, st->buf, msg[i + 1].len);
@@ -328,14 +337,17 @@
i++;
} else {
st->buf[0] = REQUEST_I2C_WRITE;
- if (dib0700_ctrl_wr(d, st->buf, msg[i].len + 2) < 0)
- break;
+ result = dib0700_ctrl_wr(d, st->buf, msg[i].len + 2);
+ if (result < 0)
+ goto unlock;
}
}
+ result = i;
+unlock:
mutex_unlock(&d->usb_mutex);
mutex_unlock(&d->i2c_mutex);
- return i;
+ return result;
}
static int dib0700_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c
index 146341a..4c57fd7 100644
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -1193,6 +1193,22 @@
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
},
+ [EM2884_BOARD_TERRATEC_H6] = {
+ .name = "Terratec Cinergy H6 rev. 2",
+ .has_dvb = 1,
+ .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
+#if 0
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .tuner_addr = 0x41,
+ .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */
+ .tuner_gpio = terratec_h5_gpio,
+#else
+ .tuner_type = TUNER_ABSENT,
+#endif
+ .def_i2c_bus = 1,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
+ EM28XX_I2C_FREQ_400_KHZ,
+ },
[EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = {
.name = "Hauppauge WinTV HVR 930C",
.has_dvb = 1,
@@ -2496,6 +2512,8 @@
.driver_info = EM2884_BOARD_TERRATEC_H5 },
{ USB_DEVICE(0x0ccd, 0x10b6), /* H5 Rev. 3 */
.driver_info = EM2884_BOARD_TERRATEC_H5 },
+ { USB_DEVICE(0x0ccd, 0x10b2), /* H6 */
+ .driver_info = EM2884_BOARD_TERRATEC_H6 },
{ USB_DEVICE(0x0ccd, 0x0084),
.driver_info = EM2860_BOARD_TERRATEC_AV350 },
{ USB_DEVICE(0x0ccd, 0x0096),
diff --git a/drivers/media/usb/em28xx/em28xx-dvb.c b/drivers/media/usb/em28xx/em28xx-dvb.c
index 82edd37..4a7db62 100644
--- a/drivers/media/usb/em28xx/em28xx-dvb.c
+++ b/drivers/media/usb/em28xx/em28xx-dvb.c
@@ -1522,6 +1522,7 @@
break;
case EM2884_BOARD_ELGATO_EYETV_HYBRID_2008:
case EM2884_BOARD_CINERGY_HTC_STICK:
+ case EM2884_BOARD_TERRATEC_H6:
terratec_htc_stick_init(dev);
/* attach demodulator */
diff --git a/drivers/media/usb/em28xx/em28xx-i2c.c b/drivers/media/usb/em28xx/em28xx-i2c.c
index 8c472d5..60b195c 100644
--- a/drivers/media/usb/em28xx/em28xx-i2c.c
+++ b/drivers/media/usb/em28xx/em28xx-i2c.c
@@ -982,8 +982,6 @@
dev_err(&dev->intf->dev,
"%s: em28xx_i2_eeprom failed! retval [%d]\n",
__func__, retval);
-
- return retval;
}
}
diff --git a/drivers/media/usb/em28xx/em28xx-input.c b/drivers/media/usb/em28xx/em28xx-input.c
index eba7573..ca96739 100644
--- a/drivers/media/usb/em28xx/em28xx-input.c
+++ b/drivers/media/usb/em28xx/em28xx-input.c
@@ -821,7 +821,7 @@
if (err)
goto error;
- dev_info(&dev->intf->dev, "Input extension successfully initalized\n");
+ dev_info(&dev->intf->dev, "Input extension successfully initialized\n");
return 0;
diff --git a/drivers/media/usb/em28xx/em28xx.h b/drivers/media/usb/em28xx/em28xx.h
index e8d97d5..88084f2 100644
--- a/drivers/media/usb/em28xx/em28xx.h
+++ b/drivers/media/usb/em28xx/em28xx.h
@@ -148,6 +148,7 @@
#define EM28178_BOARD_PLEX_PX_BCUD 98
#define EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB 99
#define EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595 100
+#define EM2884_BOARD_TERRATEC_H6 101
/* Limits minimum and default number of buffers */
#define EM28XX_MIN_BUF 4
diff --git a/drivers/media/usb/pulse8-cec/pulse8-cec.c b/drivers/media/usb/pulse8-cec/pulse8-cec.c
index c843070..f9ed9c9 100644
--- a/drivers/media/usb/pulse8-cec/pulse8-cec.c
+++ b/drivers/media/usb/pulse8-cec/pulse8-cec.c
@@ -51,7 +51,7 @@
MODULE_LICENSE("GPL");
static int debug;
-static int persistent_config = 1;
+static int persistent_config;
module_param(debug, int, 0644);
module_param(persistent_config, int, 0644);
MODULE_PARM_DESC(debug, "debug level (0-1)");
diff --git a/drivers/media/usb/rainshadow-cec/rainshadow-cec.c b/drivers/media/usb/rainshadow-cec/rainshadow-cec.c
index f203699..6569257 100644
--- a/drivers/media/usb/rainshadow-cec/rainshadow-cec.c
+++ b/drivers/media/usb/rainshadow-cec/rainshadow-cec.c
@@ -116,21 +116,19 @@
while (true) {
unsigned long flags;
- bool exit_loop = false;
char data;
spin_lock_irqsave(&rain->buf_lock, flags);
- if (rain->buf_len) {
- data = rain->buf[rain->buf_rd_idx];
- rain->buf_len--;
- rain->buf_rd_idx = (rain->buf_rd_idx + 1) & 0xff;
- } else {
- exit_loop = true;
- }
- spin_unlock_irqrestore(&rain->buf_lock, flags);
-
- if (exit_loop)
+ if (!rain->buf_len) {
+ spin_unlock_irqrestore(&rain->buf_lock, flags);
break;
+ }
+
+ data = rain->buf[rain->buf_rd_idx];
+ rain->buf_len--;
+ rain->buf_rd_idx = (rain->buf_rd_idx + 1) & 0xff;
+
+ spin_unlock_irqrestore(&rain->buf_lock, flags);
if (!rain->cmd_started && data != '?')
continue;
diff --git a/drivers/media/usb/stkwebcam/stk-sensor.c b/drivers/media/usb/stkwebcam/stk-sensor.c
index 985af99..c1d4505 100644
--- a/drivers/media/usb/stkwebcam/stk-sensor.c
+++ b/drivers/media/usb/stkwebcam/stk-sensor.c
@@ -41,6 +41,8 @@
/* It seems the i2c bus is controlled with these registers */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "stk-webcam.h"
#define STK_IIC_BASE (0x0200)
@@ -239,8 +241,8 @@
} while (tmpval == 0 && i < MAX_RETRIES);
if (tmpval != STK_IIC_STAT_TX_OK) {
if (tmpval)
- STK_ERROR("stk_sensor_outb failed, status=0x%02x\n",
- tmpval);
+ pr_err("stk_sensor_outb failed, status=0x%02x\n",
+ tmpval);
return 1;
} else
return 0;
@@ -262,8 +264,8 @@
} while (tmpval == 0 && i < MAX_RETRIES);
if (tmpval != STK_IIC_STAT_RX_OK) {
if (tmpval)
- STK_ERROR("stk_sensor_inb failed, status=0x%02x\n",
- tmpval);
+ pr_err("stk_sensor_inb failed, status=0x%02x\n",
+ tmpval);
return 1;
}
@@ -366,29 +368,29 @@
if (stk_camera_write_reg(dev, STK_IIC_ENABLE, STK_IIC_ENABLE_YES)
|| stk_camera_write_reg(dev, STK_IIC_ADDR, SENSOR_ADDRESS)
|| stk_sensor_outb(dev, REG_COM7, COM7_RESET)) {
- STK_ERROR("Sensor resetting failed\n");
+ pr_err("Sensor resetting failed\n");
return -ENODEV;
}
msleep(10);
/* Read the manufacturer ID: ov = 0x7FA2 */
if (stk_sensor_inb(dev, REG_MIDH, &idh)
|| stk_sensor_inb(dev, REG_MIDL, &idl)) {
- STK_ERROR("Strange error reading sensor ID\n");
+ pr_err("Strange error reading sensor ID\n");
return -ENODEV;
}
if (idh != 0x7f || idl != 0xa2) {
- STK_ERROR("Huh? you don't have a sensor from ovt\n");
+ pr_err("Huh? you don't have a sensor from ovt\n");
return -ENODEV;
}
if (stk_sensor_inb(dev, REG_PID, &idh)
|| stk_sensor_inb(dev, REG_VER, &idl)) {
- STK_ERROR("Could not read sensor model\n");
+ pr_err("Could not read sensor model\n");
return -ENODEV;
}
stk_sensor_write_regvals(dev, ov_initvals);
msleep(10);
- STK_INFO("OmniVision sensor detected, id %02X%02X at address %x\n",
- idh, idl, SENSOR_ADDRESS);
+ pr_info("OmniVision sensor detected, id %02X%02X at address %x\n",
+ idh, idl, SENSOR_ADDRESS);
return 0;
}
@@ -520,7 +522,8 @@
case MODE_SXGA: com7 = COM7_FMT_SXGA;
dummylines = 0;
break;
- default: STK_ERROR("Unsupported mode %d\n", dev->vsettings.mode);
+ default:
+ pr_err("Unsupported mode %d\n", dev->vsettings.mode);
return -EFAULT;
}
switch (dev->vsettings.palette) {
@@ -544,7 +547,8 @@
com7 |= COM7_PBAYER;
rv = ov_fmt_bayer;
break;
- default: STK_ERROR("Unsupported colorspace\n");
+ default:
+ pr_err("Unsupported colorspace\n");
return -EFAULT;
}
/*FIXME sometimes the sensor go to a bad state
@@ -564,7 +568,7 @@
switch (dev->vsettings.mode) {
case MODE_VGA:
if (stk_sensor_set_hw(dev, 302, 1582, 6, 486))
- STK_ERROR("stk_sensor_set_hw failed (VGA)\n");
+ pr_err("stk_sensor_set_hw failed (VGA)\n");
break;
case MODE_SXGA:
case MODE_CIF:
@@ -572,7 +576,7 @@
case MODE_QCIF:
/*FIXME These settings seem ignored by the sensor
if (stk_sensor_set_hw(dev, 220, 1500, 10, 1034))
- STK_ERROR("stk_sensor_set_hw failed (SXGA)\n");
+ pr_err("stk_sensor_set_hw failed (SXGA)\n");
*/
break;
}
diff --git a/drivers/media/usb/stkwebcam/stk-webcam.c b/drivers/media/usb/stkwebcam/stk-webcam.c
index 6e7fc36..90d4a08 100644
--- a/drivers/media/usb/stkwebcam/stk-webcam.c
+++ b/drivers/media/usb/stkwebcam/stk-webcam.c
@@ -18,6 +18,8 @@
* GNU General Public License for more details.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
@@ -175,15 +177,15 @@
if (!is_present(dev))
return -ENODEV;
if (!is_memallocd(dev) || !is_initialised(dev)) {
- STK_ERROR("FIXME: Buffers are not allocated\n");
+ pr_err("FIXME: Buffers are not allocated\n");
return -EFAULT;
}
ret = usb_set_interface(dev->udev, 0, 5);
if (ret < 0)
- STK_ERROR("usb_set_interface failed !\n");
+ pr_err("usb_set_interface failed !\n");
if (stk_sensor_wakeup(dev))
- STK_ERROR("error awaking the sensor\n");
+ pr_err("error awaking the sensor\n");
stk_camera_read_reg(dev, 0x0116, &value_116);
stk_camera_read_reg(dev, 0x0117, &value_117);
@@ -224,9 +226,9 @@
unset_streaming(dev);
if (usb_set_interface(dev->udev, 0, 0))
- STK_ERROR("usb_set_interface failed !\n");
+ pr_err("usb_set_interface failed !\n");
if (stk_sensor_sleep(dev))
- STK_ERROR("error suspending the sensor\n");
+ pr_err("error suspending the sensor\n");
}
return 0;
}
@@ -313,7 +315,7 @@
dev = (struct stk_camera *) urb->context;
if (dev == NULL) {
- STK_ERROR("isoc_handler called with NULL device !\n");
+ pr_err("isoc_handler called with NULL device !\n");
return;
}
@@ -326,14 +328,13 @@
spin_lock_irqsave(&dev->spinlock, flags);
if (urb->status != -EINPROGRESS && urb->status != 0) {
- STK_ERROR("isoc_handler: urb->status == %d\n", urb->status);
+ pr_err("isoc_handler: urb->status == %d\n", urb->status);
goto resubmit;
}
if (list_empty(&dev->sio_avail)) {
/*FIXME Stop streaming after a while */
- (void) (printk_ratelimit() &&
- STK_ERROR("isoc_handler without available buffer!\n"));
+ pr_err_ratelimited("isoc_handler without available buffer!\n");
goto resubmit;
}
fb = list_first_entry(&dev->sio_avail,
@@ -343,8 +344,8 @@
for (i = 0; i < urb->number_of_packets; i++) {
if (urb->iso_frame_desc[i].status != 0) {
if (urb->iso_frame_desc[i].status != -EXDEV)
- STK_ERROR("Frame %d has error %d\n", i,
- urb->iso_frame_desc[i].status);
+ pr_err("Frame %d has error %d\n",
+ i, urb->iso_frame_desc[i].status);
continue;
}
framelen = urb->iso_frame_desc[i].actual_length;
@@ -368,9 +369,8 @@
/* This marks a new frame */
if (fb->v4lbuf.bytesused != 0
&& fb->v4lbuf.bytesused != dev->frame_size) {
- (void) (printk_ratelimit() &&
- STK_ERROR("frame %d, bytesused=%d, skipping\n",
- i, fb->v4lbuf.bytesused));
+ pr_err_ratelimited("frame %d, bytesused=%d, skipping\n",
+ i, fb->v4lbuf.bytesused);
fb->v4lbuf.bytesused = 0;
fill = fb->buffer;
} else if (fb->v4lbuf.bytesused == dev->frame_size) {
@@ -395,8 +395,7 @@
/* Our buffer is full !!! */
if (framelen + fb->v4lbuf.bytesused > dev->frame_size) {
- (void) (printk_ratelimit() &&
- STK_ERROR("Frame buffer overflow, lost sync\n"));
+ pr_err_ratelimited("Frame buffer overflow, lost sync\n");
/*FIXME Do something here? */
continue;
}
@@ -414,8 +413,8 @@
urb->dev = dev->udev;
ret = usb_submit_urb(urb, GFP_ATOMIC);
if (ret != 0) {
- STK_ERROR("Error (%d) re-submitting urb in stk_isoc_handler.\n",
- ret);
+ pr_err("Error (%d) re-submitting urb in stk_isoc_handler\n",
+ ret);
}
}
@@ -433,32 +432,31 @@
udev = dev->udev;
if (dev->isobufs)
- STK_ERROR("isobufs already allocated. Bad\n");
+ pr_err("isobufs already allocated. Bad\n");
else
dev->isobufs = kcalloc(MAX_ISO_BUFS, sizeof(*dev->isobufs),
GFP_KERNEL);
if (dev->isobufs == NULL) {
- STK_ERROR("Unable to allocate iso buffers\n");
+ pr_err("Unable to allocate iso buffers\n");
return -ENOMEM;
}
for (i = 0; i < MAX_ISO_BUFS; i++) {
if (dev->isobufs[i].data == NULL) {
kbuf = kzalloc(ISO_BUFFER_SIZE, GFP_KERNEL);
if (kbuf == NULL) {
- STK_ERROR("Failed to allocate iso buffer %d\n",
- i);
+ pr_err("Failed to allocate iso buffer %d\n", i);
goto isobufs_out;
}
dev->isobufs[i].data = kbuf;
} else
- STK_ERROR("isobuf data already allocated\n");
+ pr_err("isobuf data already allocated\n");
if (dev->isobufs[i].urb == NULL) {
urb = usb_alloc_urb(ISO_FRAMES_PER_DESC, GFP_KERNEL);
if (urb == NULL)
goto isobufs_out;
dev->isobufs[i].urb = urb;
} else {
- STK_ERROR("Killing URB\n");
+ pr_err("Killing URB\n");
usb_kill_urb(dev->isobufs[i].urb);
urb = dev->isobufs[i].urb;
}
@@ -567,7 +565,7 @@
{
int i;
if (dev->sio_bufs != NULL)
- STK_ERROR("sio_bufs already allocated\n");
+ pr_err("sio_bufs already allocated\n");
else {
dev->sio_bufs = kzalloc(n_sbufs * sizeof(struct stk_sio_buffer),
GFP_KERNEL);
@@ -690,7 +688,7 @@
spin_lock_irqsave(&dev->spinlock, flags);
if (list_empty(&dev->sio_full)) {
spin_unlock_irqrestore(&dev->spinlock, flags);
- STK_ERROR("BUG: No siobufs ready\n");
+ pr_err("BUG: No siobufs ready\n");
return 0;
}
sbuf = list_first_entry(&dev->sio_full, struct stk_sio_buffer, list);
@@ -907,7 +905,7 @@
stk_sizes[i].m != dev->vsettings.mode; i++)
;
if (i == ARRAY_SIZE(stk_sizes)) {
- STK_ERROR("ERROR: mode invalid\n");
+ pr_err("ERROR: mode invalid\n");
return -EINVAL;
}
pix_format->width = stk_sizes[i].w;
@@ -985,7 +983,7 @@
stk_sizes[i].m != dev->vsettings.mode)
i++;
if (i == ARRAY_SIZE(stk_sizes)) {
- STK_ERROR("Something is broken in %s\n", __func__);
+ pr_err("Something is broken in %s\n", __func__);
return -EFAULT;
}
/* This registers controls some timings, not sure of what. */
@@ -1241,7 +1239,7 @@
struct stk_camera *dev = vdev_to_camera(vd);
if (dev->sio_bufs != NULL || dev->isobufs != NULL)
- STK_ERROR("We are leaking memory\n");
+ pr_err("We are leaking memory\n");
usb_put_intf(dev->interface);
kfree(dev);
}
@@ -1264,10 +1262,10 @@
video_set_drvdata(&dev->vdev, dev);
err = video_register_device(&dev->vdev, VFL_TYPE_GRABBER, -1);
if (err)
- STK_ERROR("v4l registration failed\n");
+ pr_err("v4l registration failed\n");
else
- STK_INFO("Syntek USB2.0 Camera is now controlling device %s\n",
- video_device_node_name(&dev->vdev));
+ pr_info("Syntek USB2.0 Camera is now controlling device %s\n",
+ video_device_node_name(&dev->vdev));
return err;
}
@@ -1288,7 +1286,7 @@
dev = kzalloc(sizeof(struct stk_camera), GFP_KERNEL);
if (dev == NULL) {
- STK_ERROR("Out of memory !\n");
+ pr_err("Out of memory !\n");
return -ENOMEM;
}
err = v4l2_device_register(&interface->dev, &dev->v4l2_dev);
@@ -1352,7 +1350,7 @@
}
}
if (!dev->isoc_ep) {
- STK_ERROR("Could not find isoc-in endpoint");
+ pr_err("Could not find isoc-in endpoint\n");
err = -ENODEV;
goto error;
}
@@ -1387,8 +1385,8 @@
wake_up_interruptible(&dev->wait_frame);
- STK_INFO("Syntek USB2.0 Camera release resources device %s\n",
- video_device_node_name(&dev->vdev));
+ pr_info("Syntek USB2.0 Camera release resources device %s\n",
+ video_device_node_name(&dev->vdev));
video_unregister_device(&dev->vdev);
v4l2_ctrl_handler_free(&dev->hdl);
diff --git a/drivers/media/usb/stkwebcam/stk-webcam.h b/drivers/media/usb/stkwebcam/stk-webcam.h
index 0284120..5cecbdc 100644
--- a/drivers/media/usb/stkwebcam/stk-webcam.h
+++ b/drivers/media/usb/stkwebcam/stk-webcam.h
@@ -31,12 +31,6 @@
#define ISO_MAX_FRAME_SIZE 3 * 1024
#define ISO_BUFFER_SIZE (ISO_FRAMES_PER_DESC * ISO_MAX_FRAME_SIZE)
-
-#define PREFIX "stkwebcam: "
-#define STK_INFO(str, args...) printk(KERN_INFO PREFIX str, ##args)
-#define STK_ERROR(str, args...) printk(KERN_ERR PREFIX str, ##args)
-#define STK_WARNING(str, args...) printk(KERN_WARNING PREFIX str, ##args)
-
struct stk_iso_buf {
void *data;
int length;
diff --git a/drivers/media/v4l2-core/tuner-core.c b/drivers/media/v4l2-core/tuner-core.c
index e48b7c0..8db45df 100644
--- a/drivers/media/v4l2-core/tuner-core.c
+++ b/drivers/media/v4l2-core/tuner-core.c
@@ -43,8 +43,6 @@
#define UNSET (-1U)
-#define PREFIX (t->i2c->dev.driver->name)
-
/*
* Driver modprobe parameters
*/
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 62cff5a..84eab28 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -2079,7 +2079,7 @@
mpt_detach(struct pci_dev *pdev)
{
MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
- char pname[32];
+ char pname[64];
u8 cb_idx;
unsigned long flags;
struct workqueue_struct *wq;
@@ -2100,11 +2100,11 @@
spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
destroy_workqueue(wq);
- sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s/summary", ioc->name);
+ snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s/summary", ioc->name);
remove_proc_entry(pname, NULL);
- sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s/info", ioc->name);
+ snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s/info", ioc->name);
remove_proc_entry(pname, NULL);
- sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s", ioc->name);
+ snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s", ioc->name);
remove_proc_entry(pname, NULL);
/* call per device driver remove entry point */
diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c
index d065062..6d461ca 100644
--- a/drivers/message/fusion/mptfc.c
+++ b/drivers/message/fusion/mptfc.c
@@ -104,7 +104,6 @@
static int mptfc_abort(struct scsi_cmnd *SCpnt);
static int mptfc_dev_reset(struct scsi_cmnd *SCpnt);
static int mptfc_bus_reset(struct scsi_cmnd *SCpnt);
-static int mptfc_host_reset(struct scsi_cmnd *SCpnt);
static struct scsi_host_template mptfc_driver_template = {
.module = THIS_MODULE,
@@ -123,7 +122,7 @@
.eh_abort_handler = mptfc_abort,
.eh_device_reset_handler = mptfc_dev_reset,
.eh_bus_reset_handler = mptfc_bus_reset,
- .eh_host_reset_handler = mptfc_host_reset,
+ .eh_host_reset_handler = mptscsih_host_reset,
.bios_param = mptscsih_bios_param,
.can_queue = MPT_FC_CAN_QUEUE,
.this_id = -1,
@@ -254,13 +253,6 @@
mptfc_block_error_handler(SCpnt, mptscsih_bus_reset, __func__);
}
-static int
-mptfc_host_reset(struct scsi_cmnd *SCpnt)
-{
- return
- mptfc_block_error_handler(SCpnt, mptscsih_host_reset, __func__);
-}
-
static void
mptfc_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout)
{
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index f6308ad..345f603 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -2210,33 +2210,26 @@
return rc;
}
-static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
- struct request *req)
+static void mptsas_smp_handler(struct bsg_job *job, struct Scsi_Host *shost,
+ struct sas_rphy *rphy)
{
MPT_ADAPTER *ioc = ((MPT_SCSI_HOST *) shost->hostdata)->ioc;
MPT_FRAME_HDR *mf;
SmpPassthroughRequest_t *smpreq;
- struct request *rsp = req->next_rq;
- int ret;
int flagsLength;
unsigned long timeleft;
char *psge;
- dma_addr_t dma_addr_in = 0;
- dma_addr_t dma_addr_out = 0;
u64 sas_address = 0;
-
- if (!rsp) {
- printk(MYIOC_s_ERR_FMT "%s: the smp response space is missing\n",
- ioc->name, __func__);
- return -EINVAL;
- }
+ unsigned int reslen = 0;
+ int ret = -EINVAL;
/* do we need to support multiple segments? */
- if (bio_multiple_segments(req->bio) ||
- bio_multiple_segments(rsp->bio)) {
+ if (job->request_payload.sg_cnt > 1 ||
+ job->reply_payload.sg_cnt > 1) {
printk(MYIOC_s_ERR_FMT "%s: multiple segments req %u, rsp %u\n",
- ioc->name, __func__, blk_rq_bytes(req), blk_rq_bytes(rsp));
- return -EINVAL;
+ ioc->name, __func__, job->request_payload.payload_len,
+ job->reply_payload.payload_len);
+ goto out;
}
ret = mutex_lock_interruptible(&ioc->sas_mgmt.mutex);
@@ -2252,7 +2245,8 @@
smpreq = (SmpPassthroughRequest_t *)mf;
memset(smpreq, 0, sizeof(*smpreq));
- smpreq->RequestDataLength = cpu_to_le16(blk_rq_bytes(req) - 4);
+ smpreq->RequestDataLength =
+ cpu_to_le16(job->request_payload.payload_len - 4);
smpreq->Function = MPI_FUNCTION_SMP_PASSTHROUGH;
if (rphy)
@@ -2278,13 +2272,14 @@
MPI_SGE_FLAGS_END_OF_BUFFER |
MPI_SGE_FLAGS_DIRECTION)
<< MPI_SGE_FLAGS_SHIFT;
- flagsLength |= (blk_rq_bytes(req) - 4);
- dma_addr_out = pci_map_single(ioc->pcidev, bio_data(req->bio),
- blk_rq_bytes(req), PCI_DMA_BIDIRECTIONAL);
- if (pci_dma_mapping_error(ioc->pcidev, dma_addr_out))
+ if (!dma_map_sg(&ioc->pcidev->dev, job->request_payload.sg_list,
+ 1, PCI_DMA_BIDIRECTIONAL))
goto put_mf;
- ioc->add_sge(psge, flagsLength, dma_addr_out);
+
+ flagsLength |= (sg_dma_len(job->request_payload.sg_list) - 4);
+ ioc->add_sge(psge, flagsLength,
+ sg_dma_address(job->request_payload.sg_list));
psge += ioc->SGE_size;
/* response */
@@ -2294,12 +2289,13 @@
MPI_SGE_FLAGS_END_OF_BUFFER;
flagsLength = flagsLength << MPI_SGE_FLAGS_SHIFT;
- flagsLength |= blk_rq_bytes(rsp) + 4;
- dma_addr_in = pci_map_single(ioc->pcidev, bio_data(rsp->bio),
- blk_rq_bytes(rsp), PCI_DMA_BIDIRECTIONAL);
- if (pci_dma_mapping_error(ioc->pcidev, dma_addr_in))
- goto unmap;
- ioc->add_sge(psge, flagsLength, dma_addr_in);
+
+ if (!dma_map_sg(&ioc->pcidev->dev, job->reply_payload.sg_list,
+ 1, PCI_DMA_BIDIRECTIONAL))
+ goto unmap_out;
+ flagsLength |= sg_dma_len(job->reply_payload.sg_list) + 4;
+ ioc->add_sge(psge, flagsLength,
+ sg_dma_address(job->reply_payload.sg_list));
INITIALIZE_MGMT_STATUS(ioc->sas_mgmt.status)
mpt_put_msg_frame(mptsasMgmtCtx, ioc, mf);
@@ -2310,10 +2306,10 @@
mpt_free_msg_frame(ioc, mf);
mf = NULL;
if (ioc->sas_mgmt.status & MPT_MGMT_STATUS_DID_IOCRESET)
- goto unmap;
+ goto unmap_in;
if (!timeleft)
mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
- goto unmap;
+ goto unmap_in;
}
mf = NULL;
@@ -2321,23 +2317,22 @@
SmpPassthroughReply_t *smprep;
smprep = (SmpPassthroughReply_t *)ioc->sas_mgmt.reply;
- memcpy(scsi_req(req)->sense, smprep, sizeof(*smprep));
- scsi_req(req)->sense_len = sizeof(*smprep);
- scsi_req(req)->resid_len = 0;
- scsi_req(rsp)->resid_len -= smprep->ResponseDataLength;
+ memcpy(job->reply, smprep, sizeof(*smprep));
+ job->reply_len = sizeof(*smprep);
+ reslen = smprep->ResponseDataLength;
} else {
printk(MYIOC_s_ERR_FMT
"%s: smp passthru reply failed to be returned\n",
ioc->name, __func__);
ret = -ENXIO;
}
-unmap:
- if (dma_addr_out)
- pci_unmap_single(ioc->pcidev, dma_addr_out, blk_rq_bytes(req),
- PCI_DMA_BIDIRECTIONAL);
- if (dma_addr_in)
- pci_unmap_single(ioc->pcidev, dma_addr_in, blk_rq_bytes(rsp),
- PCI_DMA_BIDIRECTIONAL);
+
+unmap_in:
+ dma_unmap_sg(&ioc->pcidev->dev, job->reply_payload.sg_list, 1,
+ PCI_DMA_BIDIRECTIONAL);
+unmap_out:
+ dma_unmap_sg(&ioc->pcidev->dev, job->request_payload.sg_list, 1,
+ PCI_DMA_BIDIRECTIONAL);
put_mf:
if (mf)
mpt_free_msg_frame(ioc, mf);
@@ -2345,7 +2340,7 @@
CLEAR_MGMT_STATUS(ioc->sas_mgmt.status)
mutex_unlock(&ioc->sas_mgmt.mutex);
out:
- return ret;
+ bsg_job_done(job, ret, reslen);
}
static struct sas_function_template mptsas_transport_functions = {
@@ -4352,11 +4347,10 @@
return;
phy_info = mptsas_refreshing_device_handles(ioc, &sas_device);
- /* Only For SATA Device ADD */
- if (!phy_info && (sas_device.device_info &
- MPI_SAS_DEVICE_INFO_SATA_DEVICE)) {
+ /* Device hot plug */
+ if (!phy_info) {
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
- "%s %d SATA HOT PLUG: "
+ "%s %d HOT PLUG: "
"parent handle of device %x\n", ioc->name,
__func__, __LINE__, sas_device.handle_parent));
port_info = mptsas_find_portinfo_by_handle(ioc,
diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index 0cfac2d..e5938c7 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -637,6 +637,9 @@
sizeof(num_of_cmds)))
return -EFAULT;
+ if (!num_of_cmds)
+ return 0;
+
if (num_of_cmds > MMC_IOC_MAX_CMDS)
return -EINVAL;
@@ -1182,7 +1185,7 @@
switch (mq_rq->drv_op) {
case MMC_DRV_OP_IOCTL:
- for (i = 0; i < mq_rq->ioc_count; i++) {
+ for (i = 0, ret = 0; i < mq_rq->ioc_count; i++) {
ret = __mmc_blk_ioctl_cmd(card, md, mq_rq->idata[i]);
if (ret)
break;
@@ -2167,6 +2170,8 @@
* from being accepted.
*/
card = md->queue.card;
+ queue_flag_set(QUEUE_FLAG_BYPASS, md->queue.queue);
+ blk_set_queue_dying(md->queue.queue);
mmc_cleanup_queue(&md->queue);
if (md->disk->flags & GENHD_FL_UP) {
device_remove_file(disk_to_dev(md->disk), &md->force_ro);
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index a9dfb26..250dc6e 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -2957,7 +2957,7 @@
}
/* find out number of slots supported */
- if (device_property_read_u32(dev, "num-slots", &pdata->num_slots))
+ if (!device_property_read_u32(dev, "num-slots", &pdata->num_slots))
dev_info(dev, "'num-slots' was deprecated.\n");
if (device_property_read_u32(dev, "fifo-depth", &pdata->fifo_depth))
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 7c12f37..04ff3c9 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -356,9 +356,6 @@
struct mmc_host *mmc = host->mmc;
int ret = 0;
- if (mmc_pdata(host)->set_power)
- return mmc_pdata(host)->set_power(host->dev, power_on, vdd);
-
/*
* If we don't see a Vcc regulator, assume it's a fixed
* voltage always-on regulator.
@@ -366,9 +363,6 @@
if (IS_ERR(mmc->supply.vmmc))
return 0;
- if (mmc_pdata(host)->before_set_reg)
- mmc_pdata(host)->before_set_reg(host->dev, power_on, vdd);
-
ret = omap_hsmmc_set_pbias(host, false, 0);
if (ret)
return ret;
@@ -400,9 +394,6 @@
return ret;
}
- if (mmc_pdata(host)->after_set_reg)
- mmc_pdata(host)->after_set_reg(host->dev, power_on, vdd);
-
return 0;
err_set_voltage:
@@ -469,8 +460,6 @@
int ret;
struct mmc_host *mmc = host->mmc;
- if (mmc_pdata(host)->set_power)
- return 0;
ret = mmc_regulator_get_supply(mmc);
if (ret == -EPROBE_DEFER)
diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c
index cf66a3d..ac678e9 100644
--- a/drivers/mmc/host/sdhci-acpi.c
+++ b/drivers/mmc/host/sdhci-acpi.c
@@ -45,6 +45,7 @@
#include <asm/cpu_device_id.h>
#include <asm/intel-family.h>
#include <asm/iosf_mbi.h>
+#include <linux/pci.h>
#endif
#include "sdhci.h"
@@ -134,6 +135,16 @@
return x86_match_cpu(byt);
}
+static bool sdhci_acpi_cht(void)
+{
+ static const struct x86_cpu_id cht[] = {
+ { X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_AIRMONT },
+ {}
+ };
+
+ return x86_match_cpu(cht);
+}
+
#define BYT_IOSF_SCCEP 0x63
#define BYT_IOSF_OCP_NETCTRL0 0x1078
#define BYT_IOSF_OCP_TIMEOUT_BASE GENMASK(10, 8)
@@ -178,6 +189,45 @@
return false;
}
+static bool sdhci_acpi_cht_pci_wifi(unsigned int vendor, unsigned int device,
+ unsigned int slot, unsigned int parent_slot)
+{
+ struct pci_dev *dev, *parent, *from = NULL;
+
+ while (1) {
+ dev = pci_get_device(vendor, device, from);
+ pci_dev_put(from);
+ if (!dev)
+ break;
+ parent = pci_upstream_bridge(dev);
+ if (ACPI_COMPANION(&dev->dev) && PCI_SLOT(dev->devfn) == slot &&
+ parent && PCI_SLOT(parent->devfn) == parent_slot &&
+ !pci_upstream_bridge(parent)) {
+ pci_dev_put(dev);
+ return true;
+ }
+ from = dev;
+ }
+
+ return false;
+}
+
+/*
+ * GPDwin uses PCI wifi which conflicts with SDIO's use of
+ * acpi_device_fix_up_power() on child device nodes. Identifying GPDwin is
+ * problematic, but since SDIO is only used for wifi, the presence of the PCI
+ * wifi card in the expected slot with an ACPI companion node, is used to
+ * indicate that acpi_device_fix_up_power() should be avoided.
+ */
+static inline bool sdhci_acpi_no_fixup_child_power(const char *hid,
+ const char *uid)
+{
+ return sdhci_acpi_cht() &&
+ !strcmp(hid, "80860F14") &&
+ !strcmp(uid, "2") &&
+ sdhci_acpi_cht_pci_wifi(0x14e4, 0x43ec, 0, 28);
+}
+
#else
static inline void sdhci_acpi_byt_setting(struct device *dev)
@@ -189,6 +239,12 @@
return false;
}
+static inline bool sdhci_acpi_no_fixup_child_power(const char *hid,
+ const char *uid)
+{
+ return false;
+}
+
#endif
static int bxt_get_cd(struct mmc_host *mmc)
@@ -389,18 +445,20 @@
if (acpi_bus_get_device(handle, &device))
return -ENODEV;
+ hid = acpi_device_hid(device);
+ uid = device->pnp.unique_id;
+
/* Power on the SDHCI controller and its children */
acpi_device_fix_up_power(device);
- list_for_each_entry(child, &device->children, node)
- if (child->status.present && child->status.enabled)
- acpi_device_fix_up_power(child);
+ if (!sdhci_acpi_no_fixup_child_power(hid, uid)) {
+ list_for_each_entry(child, &device->children, node)
+ if (child->status.present && child->status.enabled)
+ acpi_device_fix_up_power(child);
+ }
if (sdhci_acpi_byt_defer(dev))
return -EPROBE_DEFER;
- hid = acpi_device_hid(device);
- uid = device->pnp.unique_id;
-
iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!iomem)
return -ENOMEM;
diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c
index 7611fd6..1485530 100644
--- a/drivers/mmc/host/sdhci-of-at91.c
+++ b/drivers/mmc/host/sdhci-of-at91.c
@@ -31,6 +31,7 @@
#define SDMMC_MC1R 0x204
#define SDMMC_MC1R_DDR BIT(3)
+#define SDMMC_MC1R_FCD BIT(7)
#define SDMMC_CACR 0x230
#define SDMMC_CACR_CAPWREN BIT(0)
#define SDMMC_CACR_KEY (0x46 << 8)
@@ -43,6 +44,15 @@
struct clk *mainck;
};
+static void sdhci_at91_set_force_card_detect(struct sdhci_host *host)
+{
+ u8 mc1r;
+
+ mc1r = readb(host->ioaddr + SDMMC_MC1R);
+ mc1r |= SDMMC_MC1R_FCD;
+ writeb(mc1r, host->ioaddr + SDMMC_MC1R);
+}
+
static void sdhci_at91_set_clock(struct sdhci_host *host, unsigned int clock)
{
u16 clk;
@@ -110,10 +120,18 @@
sdhci_set_uhs_signaling(host, timing);
}
+static void sdhci_at91_reset(struct sdhci_host *host, u8 mask)
+{
+ sdhci_reset(host, mask);
+
+ if (host->mmc->caps & MMC_CAP_NONREMOVABLE)
+ sdhci_at91_set_force_card_detect(host);
+}
+
static const struct sdhci_ops sdhci_at91_sama5d2_ops = {
.set_clock = sdhci_at91_set_clock,
.set_bus_width = sdhci_set_bus_width,
- .reset = sdhci_reset,
+ .reset = sdhci_at91_reset,
.set_uhs_signaling = sdhci_at91_set_uhs_signaling,
.set_power = sdhci_at91_set_power,
};
@@ -324,6 +342,21 @@
host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
}
+ /*
+ * If the device attached to the MMC bus is not removable, it is safer
+ * to set the Force Card Detect bit. People often don't connect the
+ * card detect signal and use this pin for another purpose. If the card
+ * detect pin is not muxed to SDHCI controller, a default value is
+ * used. This value can be different from a SoC revision to another
+ * one. Problems come when this default value is not card present. To
+ * avoid this case, if the device is non removable then the card
+ * detection procedure using the SDMCC_CD signal is bypassed.
+ * This bit is reset when a software reset for all command is performed
+ * so we need to implement our own reset function to set back this bit.
+ */
+ if (host->mmc->caps & MMC_CAP_NONREMOVABLE)
+ sdhci_at91_set_force_card_detect(host);
+
pm_runtime_put_autosuspend(&pdev->dev);
return 0;
diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
index d6fa221..0fb4e4c 100644
--- a/drivers/mmc/host/sunxi-mmc.c
+++ b/drivers/mmc/host/sunxi-mmc.c
@@ -793,8 +793,12 @@
}
mmc_writel(host, REG_CLKCR, rval);
- if (host->cfg->needs_new_timings)
- mmc_writel(host, REG_SD_NTSR, SDXC_2X_TIMING_MODE);
+ if (host->cfg->needs_new_timings) {
+ /* Don't touch the delay bits */
+ rval = mmc_readl(host, REG_SD_NTSR);
+ rval |= SDXC_2X_TIMING_MODE;
+ mmc_writel(host, REG_SD_NTSR, rval);
+ }
ret = sunxi_mmc_clk_set_phase(host, ios, rate);
if (ret)
diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c
index 82b80d4..88a9435 100644
--- a/drivers/mmc/host/tmio_mmc_core.c
+++ b/drivers/mmc/host/tmio_mmc_core.c
@@ -409,30 +409,29 @@
* Transfer the data
*/
if (host->pdata->flags & TMIO_MMC_32BIT_DATA_PORT) {
- u8 data[4] = { };
+ u32 data = 0;
+ u32 *buf32 = (u32 *)buf;
if (is_read)
- sd_ctrl_read32_rep(host, CTL_SD_DATA_PORT, (u32 *)buf,
+ sd_ctrl_read32_rep(host, CTL_SD_DATA_PORT, buf32,
count >> 2);
else
- sd_ctrl_write32_rep(host, CTL_SD_DATA_PORT, (u32 *)buf,
+ sd_ctrl_write32_rep(host, CTL_SD_DATA_PORT, buf32,
count >> 2);
/* if count was multiple of 4 */
if (!(count & 0x3))
return;
- buf8 = (u8 *)(buf + (count >> 2));
+ buf32 += count >> 2;
count %= 4;
if (is_read) {
- sd_ctrl_read32_rep(host, CTL_SD_DATA_PORT,
- (u32 *)data, 1);
- memcpy(buf8, data, count);
+ sd_ctrl_read32_rep(host, CTL_SD_DATA_PORT, &data, 1);
+ memcpy(buf32, &data, count);
} else {
- memcpy(data, buf8, count);
- sd_ctrl_write32_rep(host, CTL_SD_DATA_PORT,
- (u32 *)data, 1);
+ memcpy(&data, buf32, count);
+ sd_ctrl_write32_rep(host, CTL_SD_DATA_PORT, &data, 1);
}
return;
diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c
index e15a973..9668616 100644
--- a/drivers/mmc/host/wbsd.c
+++ b/drivers/mmc/host/wbsd.c
@@ -1386,7 +1386,7 @@
* order for ISA to be able to DMA to it.
*/
host->dma_buffer = kmalloc(WBSD_DMA_SIZE,
- GFP_NOIO | GFP_DMA | __GFP_REPEAT | __GFP_NOWARN);
+ GFP_NOIO | GFP_DMA | __GFP_RETRY_MAYFAIL | __GFP_NOWARN);
if (!host->dma_buffer)
goto free;
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index e83a279..5a2d717 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -155,6 +155,10 @@
This provides partitions parser for devices based on BCM47xx
boards.
+menu "Partition parsers"
+source "drivers/mtd/parsers/Kconfig"
+endmenu
+
comment "User Modules And Translation Layers"
#
diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile
index 99bb9a1..151d60df 100644
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -13,6 +13,7 @@
obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o
+obj-y += parsers/
# 'Users' - code which presents functionality to userspace.
obj-$(CONFIG_MTD_BLKDEVS) += mtd_blkdevs.o
diff --git a/drivers/mtd/bcm47xxpart.c b/drivers/mtd/bcm47xxpart.c
index d10fa6c..fe2581d 100644
--- a/drivers/mtd/bcm47xxpart.c
+++ b/drivers/mtd/bcm47xxpart.c
@@ -43,7 +43,8 @@
#define ML_MAGIC2 0x26594131
#define TRX_MAGIC 0x30524448
#define SHSQ_MAGIC 0x71736873 /* shsq (weird ZTE H218N endianness) */
-#define UBI_EC_MAGIC 0x23494255 /* UBI# */
+
+static const char * const trx_types[] = { "trx", NULL };
struct trx_header {
uint32_t magic;
@@ -62,89 +63,6 @@
part->mask_flags = mask_flags;
}
-static const char *bcm47xxpart_trx_data_part_name(struct mtd_info *master,
- size_t offset)
-{
- uint32_t buf;
- size_t bytes_read;
- int err;
-
- err = mtd_read(master, offset, sizeof(buf), &bytes_read,
- (uint8_t *)&buf);
- if (err && !mtd_is_bitflip(err)) {
- pr_err("mtd_read error while parsing (offset: 0x%X): %d\n",
- offset, err);
- goto out_default;
- }
-
- if (buf == UBI_EC_MAGIC)
- return "ubi";
-
-out_default:
- return "rootfs";
-}
-
-static int bcm47xxpart_parse_trx(struct mtd_info *master,
- struct mtd_partition *trx,
- struct mtd_partition *parts,
- size_t parts_len)
-{
- struct trx_header header;
- size_t bytes_read;
- int curr_part = 0;
- int i, err;
-
- if (parts_len < 3) {
- pr_warn("No enough space to add TRX partitions!\n");
- return -ENOMEM;
- }
-
- err = mtd_read(master, trx->offset, sizeof(header), &bytes_read,
- (uint8_t *)&header);
- if (err && !mtd_is_bitflip(err)) {
- pr_err("mtd_read error while reading TRX header: %d\n", err);
- return err;
- }
-
- i = 0;
-
- /* We have LZMA loader if offset[2] points to sth */
- if (header.offset[2]) {
- bcm47xxpart_add_part(&parts[curr_part++], "loader",
- trx->offset + header.offset[i], 0);
- i++;
- }
-
- if (header.offset[i]) {
- bcm47xxpart_add_part(&parts[curr_part++], "linux",
- trx->offset + header.offset[i], 0);
- i++;
- }
-
- if (header.offset[i]) {
- size_t offset = trx->offset + header.offset[i];
- const char *name = bcm47xxpart_trx_data_part_name(master,
- offset);
-
- bcm47xxpart_add_part(&parts[curr_part++], name, offset, 0);
- i++;
- }
-
- /*
- * Assume that every partition ends at the beginning of the one it is
- * followed by.
- */
- for (i = 0; i < curr_part; i++) {
- u64 next_part_offset = (i < curr_part - 1) ?
- parts[i + 1].offset :
- trx->offset + trx->size;
-
- parts[i].size = next_part_offset - parts[i].offset;
- }
-
- return curr_part;
-}
-
/**
* bcm47xxpart_bootpartition - gets index of TRX partition used by bootloader
*
@@ -362,17 +280,10 @@
for (i = 0; i < trx_num; i++) {
struct mtd_partition *trx = &parts[trx_parts[i]];
- if (i == bcm47xxpart_bootpartition()) {
- int num_parts;
-
- num_parts = bcm47xxpart_parse_trx(master, trx,
- parts + curr_part,
- BCM47XXPART_MAX_PARTS - curr_part);
- if (num_parts > 0)
- curr_part += num_parts;
- } else {
+ if (i == bcm47xxpart_bootpartition())
+ trx->types = trx_types;
+ else
trx->name = "failsafe";
- }
}
*pparts = parts;
diff --git a/drivers/mtd/chips/cfi_cmdset_0020.c b/drivers/mtd/chips/cfi_cmdset_0020.c
index 94d3eb4..7d34296 100644
--- a/drivers/mtd/chips/cfi_cmdset_0020.c
+++ b/drivers/mtd/chips/cfi_cmdset_0020.c
@@ -666,7 +666,7 @@
size_t totlen = 0, thislen;
int ret = 0;
size_t buflen = 0;
- static char *buffer;
+ char *buffer;
if (!ECCBUF_SIZE) {
/* We should fall back to a general writev implementation.
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index 58329d2..6def544 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -95,6 +95,16 @@
if you want to specify device partitioning or to use a device which
doesn't support the JEDEC ID instruction.
+config MTD_MCHP23K256
+ tristate "Microchip 23K256 SRAM"
+ depends on SPI_MASTER
+ help
+ This enables access to Microchip 23K256 SRAM chips, using SPI.
+
+ Set up your spi devices with the right board-specific
+ platform data, or a device tree description if you want to
+ specify device partitioning
+
config MTD_SPEAR_SMI
tristate "SPEAR MTD NOR Support through SMI controller"
depends on PLAT_SPEAR
diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile
index 7912d3a..f0f7676 100644
--- a/drivers/mtd/devices/Makefile
+++ b/drivers/mtd/devices/Makefile
@@ -12,6 +12,7 @@
obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o
obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
obj-$(CONFIG_MTD_M25P80) += m25p80.o
+obj-$(CONFIG_MTD_MCHP23K256) += mchp23k256.o
obj-$(CONFIG_MTD_SPEAR_SMI) += spear_smi.o
obj-$(CONFIG_MTD_SST25L) += sst25l.o
obj-$(CONFIG_MTD_BCM47XXSFLASH) += bcm47xxsflash.o
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index c4df3b1..00eea6f 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -78,11 +78,17 @@
{
struct m25p *flash = nor->priv;
struct spi_device *spi = flash->spi;
- struct spi_transfer t[2] = {};
+ unsigned int inst_nbits, addr_nbits, data_nbits, data_idx;
+ struct spi_transfer t[3] = {};
struct spi_message m;
int cmd_sz = m25p_cmdsz(nor);
ssize_t ret;
+ /* get transfer protocols. */
+ inst_nbits = spi_nor_get_protocol_inst_nbits(nor->write_proto);
+ addr_nbits = spi_nor_get_protocol_addr_nbits(nor->write_proto);
+ data_nbits = spi_nor_get_protocol_data_nbits(nor->write_proto);
+
spi_message_init(&m);
if (nor->program_opcode == SPINOR_OP_AAI_WP && nor->sst_write_second)
@@ -92,12 +98,27 @@
m25p_addr2cmd(nor, to, flash->command);
t[0].tx_buf = flash->command;
+ t[0].tx_nbits = inst_nbits;
t[0].len = cmd_sz;
spi_message_add_tail(&t[0], &m);
- t[1].tx_buf = buf;
- t[1].len = len;
- spi_message_add_tail(&t[1], &m);
+ /* split the op code and address bytes into two transfers if needed. */
+ data_idx = 1;
+ if (addr_nbits != inst_nbits) {
+ t[0].len = 1;
+
+ t[1].tx_buf = &flash->command[1];
+ t[1].tx_nbits = addr_nbits;
+ t[1].len = cmd_sz - 1;
+ spi_message_add_tail(&t[1], &m);
+
+ data_idx = 2;
+ }
+
+ t[data_idx].tx_buf = buf;
+ t[data_idx].tx_nbits = data_nbits;
+ t[data_idx].len = len;
+ spi_message_add_tail(&t[data_idx], &m);
ret = spi_sync(spi, &m);
if (ret)
@@ -109,18 +130,6 @@
return ret;
}
-static inline unsigned int m25p80_rx_nbits(struct spi_nor *nor)
-{
- switch (nor->flash_read) {
- case SPI_NOR_DUAL:
- return 2;
- case SPI_NOR_QUAD:
- return 4;
- default:
- return 0;
- }
-}
-
/*
* Read an address range from the nor chip. The address range
* may be any size provided it is within the physical boundaries.
@@ -130,13 +139,20 @@
{
struct m25p *flash = nor->priv;
struct spi_device *spi = flash->spi;
- struct spi_transfer t[2];
+ unsigned int inst_nbits, addr_nbits, data_nbits, data_idx;
+ struct spi_transfer t[3];
struct spi_message m;
unsigned int dummy = nor->read_dummy;
ssize_t ret;
+ int cmd_sz;
+
+ /* get transfer protocols. */
+ inst_nbits = spi_nor_get_protocol_inst_nbits(nor->read_proto);
+ addr_nbits = spi_nor_get_protocol_addr_nbits(nor->read_proto);
+ data_nbits = spi_nor_get_protocol_data_nbits(nor->read_proto);
/* convert the dummy cycles to the number of bytes */
- dummy /= 8;
+ dummy = (dummy * addr_nbits) / 8;
if (spi_flash_read_supported(spi)) {
struct spi_flash_read_message msg;
@@ -149,10 +165,9 @@
msg.read_opcode = nor->read_opcode;
msg.addr_width = nor->addr_width;
msg.dummy_bytes = dummy;
- /* TODO: Support other combinations */
- msg.opcode_nbits = SPI_NBITS_SINGLE;
- msg.addr_nbits = SPI_NBITS_SINGLE;
- msg.data_nbits = m25p80_rx_nbits(nor);
+ msg.opcode_nbits = inst_nbits;
+ msg.addr_nbits = addr_nbits;
+ msg.data_nbits = data_nbits;
ret = spi_flash_read(spi, &msg);
if (ret < 0)
@@ -167,20 +182,45 @@
m25p_addr2cmd(nor, from, flash->command);
t[0].tx_buf = flash->command;
+ t[0].tx_nbits = inst_nbits;
t[0].len = m25p_cmdsz(nor) + dummy;
spi_message_add_tail(&t[0], &m);
- t[1].rx_buf = buf;
- t[1].rx_nbits = m25p80_rx_nbits(nor);
- t[1].len = min3(len, spi_max_transfer_size(spi),
- spi_max_message_size(spi) - t[0].len);
- spi_message_add_tail(&t[1], &m);
+ /*
+ * Set all dummy/mode cycle bits to avoid sending some manufacturer
+ * specific pattern, which might make the memory enter its Continuous
+ * Read mode by mistake.
+ * Based on the different mode cycle bit patterns listed and described
+ * in the JESD216B specification, the 0xff value works for all memories
+ * and all manufacturers.
+ */
+ cmd_sz = t[0].len;
+ memset(flash->command + cmd_sz - dummy, 0xff, dummy);
+
+ /* split the op code and address bytes into two transfers if needed. */
+ data_idx = 1;
+ if (addr_nbits != inst_nbits) {
+ t[0].len = 1;
+
+ t[1].tx_buf = &flash->command[1];
+ t[1].tx_nbits = addr_nbits;
+ t[1].len = cmd_sz - 1;
+ spi_message_add_tail(&t[1], &m);
+
+ data_idx = 2;
+ }
+
+ t[data_idx].rx_buf = buf;
+ t[data_idx].rx_nbits = data_nbits;
+ t[data_idx].len = min3(len, spi_max_transfer_size(spi),
+ spi_max_message_size(spi) - cmd_sz);
+ spi_message_add_tail(&t[data_idx], &m);
ret = spi_sync(spi, &m);
if (ret)
return ret;
- ret = m.actual_length - m25p_cmdsz(nor) - dummy;
+ ret = m.actual_length - cmd_sz;
if (ret < 0)
return -EIO;
return ret;
@@ -196,7 +236,11 @@
struct flash_platform_data *data;
struct m25p *flash;
struct spi_nor *nor;
- enum read_mode mode = SPI_NOR_NORMAL;
+ struct spi_nor_hwcaps hwcaps = {
+ .mask = SNOR_HWCAPS_READ |
+ SNOR_HWCAPS_READ_FAST |
+ SNOR_HWCAPS_PP,
+ };
char *flash_name;
int ret;
@@ -221,10 +265,19 @@
spi_set_drvdata(spi, flash);
flash->spi = spi;
- if (spi->mode & SPI_RX_QUAD)
- mode = SPI_NOR_QUAD;
- else if (spi->mode & SPI_RX_DUAL)
- mode = SPI_NOR_DUAL;
+ if (spi->mode & SPI_RX_QUAD) {
+ hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4;
+
+ if (spi->mode & SPI_TX_QUAD)
+ hwcaps.mask |= (SNOR_HWCAPS_READ_1_4_4 |
+ SNOR_HWCAPS_PP_1_1_4 |
+ SNOR_HWCAPS_PP_1_4_4);
+ } else if (spi->mode & SPI_RX_DUAL) {
+ hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2;
+
+ if (spi->mode & SPI_TX_DUAL)
+ hwcaps.mask |= SNOR_HWCAPS_READ_1_2_2;
+ }
if (data && data->name)
nor->mtd.name = data->name;
@@ -241,7 +294,7 @@
else
flash_name = spi->modalias;
- ret = spi_nor_scan(nor, flash_name, mode);
+ ret = spi_nor_scan(nor, flash_name, &hwcaps);
if (ret)
return ret;
diff --git a/drivers/mtd/devices/mchp23k256.c b/drivers/mtd/devices/mchp23k256.c
new file mode 100644
index 0000000..8956b7d
--- /dev/null
+++ b/drivers/mtd/devices/mchp23k256.c
@@ -0,0 +1,236 @@
+/*
+ * mchp23k256.c
+ *
+ * Driver for Microchip 23k256 SPI RAM chips
+ *
+ * Copyright © 2016 Andrew Lunn <andrew@lunn.ch>
+ *
+ * This code is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mutex.h>
+#include <linux/sched.h>
+#include <linux/sizes.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/of_device.h>
+
+#define MAX_CMD_SIZE 4
+
+struct mchp23_caps {
+ u8 addr_width;
+ unsigned int size;
+};
+
+struct mchp23k256_flash {
+ struct spi_device *spi;
+ struct mutex lock;
+ struct mtd_info mtd;
+ const struct mchp23_caps *caps;
+};
+
+#define MCHP23K256_CMD_WRITE_STATUS 0x01
+#define MCHP23K256_CMD_WRITE 0x02
+#define MCHP23K256_CMD_READ 0x03
+#define MCHP23K256_MODE_SEQ BIT(6)
+
+#define to_mchp23k256_flash(x) container_of(x, struct mchp23k256_flash, mtd)
+
+static void mchp23k256_addr2cmd(struct mchp23k256_flash *flash,
+ unsigned int addr, u8 *cmd)
+{
+ int i;
+
+ /*
+ * Address is sent in big endian (MSB first) and we skip
+ * the first entry of the cmd array which contains the cmd
+ * opcode.
+ */
+ for (i = flash->caps->addr_width; i > 0; i--, addr >>= 8)
+ cmd[i] = addr;
+}
+
+static int mchp23k256_cmdsz(struct mchp23k256_flash *flash)
+{
+ return 1 + flash->caps->addr_width;
+}
+
+static int mchp23k256_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const unsigned char *buf)
+{
+ struct mchp23k256_flash *flash = to_mchp23k256_flash(mtd);
+ struct spi_transfer transfer[2] = {};
+ struct spi_message message;
+ unsigned char command[MAX_CMD_SIZE];
+
+ spi_message_init(&message);
+
+ command[0] = MCHP23K256_CMD_WRITE;
+ mchp23k256_addr2cmd(flash, to, command);
+
+ transfer[0].tx_buf = command;
+ transfer[0].len = mchp23k256_cmdsz(flash);
+ spi_message_add_tail(&transfer[0], &message);
+
+ transfer[1].tx_buf = buf;
+ transfer[1].len = len;
+ spi_message_add_tail(&transfer[1], &message);
+
+ mutex_lock(&flash->lock);
+
+ spi_sync(flash->spi, &message);
+
+ if (retlen && message.actual_length > sizeof(command))
+ *retlen += message.actual_length - sizeof(command);
+
+ mutex_unlock(&flash->lock);
+ return 0;
+}
+
+static int mchp23k256_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, unsigned char *buf)
+{
+ struct mchp23k256_flash *flash = to_mchp23k256_flash(mtd);
+ struct spi_transfer transfer[2] = {};
+ struct spi_message message;
+ unsigned char command[MAX_CMD_SIZE];
+
+ spi_message_init(&message);
+
+ memset(&transfer, 0, sizeof(transfer));
+ command[0] = MCHP23K256_CMD_READ;
+ mchp23k256_addr2cmd(flash, from, command);
+
+ transfer[0].tx_buf = command;
+ transfer[0].len = mchp23k256_cmdsz(flash);
+ spi_message_add_tail(&transfer[0], &message);
+
+ transfer[1].rx_buf = buf;
+ transfer[1].len = len;
+ spi_message_add_tail(&transfer[1], &message);
+
+ mutex_lock(&flash->lock);
+
+ spi_sync(flash->spi, &message);
+
+ if (retlen && message.actual_length > sizeof(command))
+ *retlen += message.actual_length - sizeof(command);
+
+ mutex_unlock(&flash->lock);
+ return 0;
+}
+
+/*
+ * Set the device into sequential mode. This allows read/writes to the
+ * entire SRAM in a single operation
+ */
+static int mchp23k256_set_mode(struct spi_device *spi)
+{
+ struct spi_transfer transfer = {};
+ struct spi_message message;
+ unsigned char command[2];
+
+ spi_message_init(&message);
+
+ command[0] = MCHP23K256_CMD_WRITE_STATUS;
+ command[1] = MCHP23K256_MODE_SEQ;
+
+ transfer.tx_buf = command;
+ transfer.len = sizeof(command);
+ spi_message_add_tail(&transfer, &message);
+
+ return spi_sync(spi, &message);
+}
+
+static const struct mchp23_caps mchp23k256_caps = {
+ .size = SZ_32K,
+ .addr_width = 2,
+};
+
+static const struct mchp23_caps mchp23lcv1024_caps = {
+ .size = SZ_128K,
+ .addr_width = 3,
+};
+
+static int mchp23k256_probe(struct spi_device *spi)
+{
+ struct mchp23k256_flash *flash;
+ struct flash_platform_data *data;
+ int err;
+
+ flash = devm_kzalloc(&spi->dev, sizeof(*flash), GFP_KERNEL);
+ if (!flash)
+ return -ENOMEM;
+
+ flash->spi = spi;
+ mutex_init(&flash->lock);
+ spi_set_drvdata(spi, flash);
+
+ err = mchp23k256_set_mode(spi);
+ if (err)
+ return err;
+
+ data = dev_get_platdata(&spi->dev);
+
+ flash->caps = of_device_get_match_data(&spi->dev);
+ if (!flash->caps)
+ flash->caps = &mchp23k256_caps;
+
+ mtd_set_of_node(&flash->mtd, spi->dev.of_node);
+ flash->mtd.dev.parent = &spi->dev;
+ flash->mtd.type = MTD_RAM;
+ flash->mtd.flags = MTD_CAP_RAM;
+ flash->mtd.writesize = 1;
+ flash->mtd.size = flash->caps->size;
+ flash->mtd._read = mchp23k256_read;
+ flash->mtd._write = mchp23k256_write;
+
+ err = mtd_device_register(&flash->mtd, data ? data->parts : NULL,
+ data ? data->nr_parts : 0);
+ if (err)
+ return err;
+
+ return 0;
+}
+
+static int mchp23k256_remove(struct spi_device *spi)
+{
+ struct mchp23k256_flash *flash = spi_get_drvdata(spi);
+
+ return mtd_device_unregister(&flash->mtd);
+}
+
+static const struct of_device_id mchp23k256_of_table[] = {
+ {
+ .compatible = "microchip,mchp23k256",
+ .data = &mchp23k256_caps,
+ },
+ {
+ .compatible = "microchip,mchp23lcv1024",
+ .data = &mchp23lcv1024_caps,
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, mchp23k256_of_table);
+
+static struct spi_driver mchp23k256_driver = {
+ .driver = {
+ .name = "mchp23k256",
+ .of_match_table = of_match_ptr(mchp23k256_of_table),
+ },
+ .probe = mchp23k256_probe,
+ .remove = mchp23k256_remove,
+};
+
+module_spi_driver(mchp23k256_driver);
+
+MODULE_DESCRIPTION("MTD SPI driver for MCHP23K256 RAM chips");
+MODULE_AUTHOR("Andrew Lunn <andre@lunn.ch>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("spi:mchp23k256");
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index f9e9bd1..5dc8bd0 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -82,9 +82,13 @@
#define OP_WRITE_SECURITY_REVC 0x9A
#define OP_WRITE_SECURITY 0x9B /* revision D */
+#define CFI_MFR_ATMEL 0x1F
+
+#define DATAFLASH_SHIFT_EXTID 24
+#define DATAFLASH_SHIFT_ID 40
struct dataflash {
- uint8_t command[4];
+ u8 command[4];
char name[24];
unsigned short page_offset; /* offset in flash address */
@@ -129,8 +133,7 @@
for (;;) {
status = dataflash_status(spi);
if (status < 0) {
- pr_debug("%s: status %d?\n",
- dev_name(&spi->dev), status);
+ dev_dbg(&spi->dev, "status %d?\n", status);
status = 0;
}
@@ -153,12 +156,11 @@
struct spi_transfer x = { };
struct spi_message msg;
unsigned blocksize = priv->page_size << 3;
- uint8_t *command;
- uint32_t rem;
+ u8 *command;
+ u32 rem;
- pr_debug("%s: erase addr=0x%llx len 0x%llx\n",
- dev_name(&spi->dev), (long long)instr->addr,
- (long long)instr->len);
+ dev_dbg(&spi->dev, "erase addr=0x%llx len 0x%llx\n",
+ (long long)instr->addr, (long long)instr->len);
div_u64_rem(instr->len, priv->page_size, &rem);
if (rem)
@@ -187,11 +189,11 @@
pageaddr = pageaddr << priv->page_offset;
command[0] = do_block ? OP_ERASE_BLOCK : OP_ERASE_PAGE;
- command[1] = (uint8_t)(pageaddr >> 16);
- command[2] = (uint8_t)(pageaddr >> 8);
+ command[1] = (u8)(pageaddr >> 16);
+ command[2] = (u8)(pageaddr >> 8);
command[3] = 0;
- pr_debug("ERASE %s: (%x) %x %x %x [%i]\n",
+ dev_dbg(&spi->dev, "ERASE %s: (%x) %x %x %x [%i]\n",
do_block ? "block" : "page",
command[0], command[1], command[2], command[3],
pageaddr);
@@ -200,8 +202,8 @@
(void) dataflash_waitready(spi);
if (status < 0) {
- printk(KERN_ERR "%s: erase %x, err %d\n",
- dev_name(&spi->dev), pageaddr, status);
+ dev_err(&spi->dev, "erase %x, err %d\n",
+ pageaddr, status);
/* REVISIT: can retry instr->retries times; or
* giveup and instr->fail_addr = instr->addr;
*/
@@ -239,11 +241,11 @@
struct spi_transfer x[2] = { };
struct spi_message msg;
unsigned int addr;
- uint8_t *command;
+ u8 *command;
int status;
- pr_debug("%s: read 0x%x..0x%x\n", dev_name(&priv->spi->dev),
- (unsigned)from, (unsigned)(from + len));
+ dev_dbg(&priv->spi->dev, "read 0x%x..0x%x\n",
+ (unsigned int)from, (unsigned int)(from + len));
/* Calculate flash page/byte address */
addr = (((unsigned)from / priv->page_size) << priv->page_offset)
@@ -251,7 +253,7 @@
command = priv->command;
- pr_debug("READ: (%x) %x %x %x\n",
+ dev_dbg(&priv->spi->dev, "READ: (%x) %x %x %x\n",
command[0], command[1], command[2], command[3]);
spi_message_init(&msg);
@@ -271,9 +273,9 @@
* fewer "don't care" bytes. Both buffers stay unchanged.
*/
command[0] = OP_READ_CONTINUOUS;
- command[1] = (uint8_t)(addr >> 16);
- command[2] = (uint8_t)(addr >> 8);
- command[3] = (uint8_t)(addr >> 0);
+ command[1] = (u8)(addr >> 16);
+ command[2] = (u8)(addr >> 8);
+ command[3] = (u8)(addr >> 0);
/* plus 4 "don't care" bytes */
status = spi_sync(priv->spi, &msg);
@@ -283,8 +285,7 @@
*retlen = msg.actual_length - 8;
status = 0;
} else
- pr_debug("%s: read %x..%x --> %d\n",
- dev_name(&priv->spi->dev),
+ dev_dbg(&priv->spi->dev, "read %x..%x --> %d\n",
(unsigned)from, (unsigned)(from + len),
status);
return status;
@@ -308,10 +309,10 @@
size_t remaining = len;
u_char *writebuf = (u_char *) buf;
int status = -EINVAL;
- uint8_t *command;
+ u8 *command;
- pr_debug("%s: write 0x%x..0x%x\n",
- dev_name(&spi->dev), (unsigned)to, (unsigned)(to + len));
+ dev_dbg(&spi->dev, "write 0x%x..0x%x\n",
+ (unsigned int)to, (unsigned int)(to + len));
spi_message_init(&msg);
@@ -328,7 +329,7 @@
mutex_lock(&priv->lock);
while (remaining > 0) {
- pr_debug("write @ %i:%i len=%i\n",
+ dev_dbg(&spi->dev, "write @ %i:%i len=%i\n",
pageaddr, offset, writelen);
/* REVISIT:
@@ -356,13 +357,13 @@
command[2] = (addr & 0x0000FF00) >> 8;
command[3] = 0;
- pr_debug("TRANSFER: (%x) %x %x %x\n",
+ dev_dbg(&spi->dev, "TRANSFER: (%x) %x %x %x\n",
command[0], command[1], command[2], command[3]);
status = spi_sync(spi, &msg);
if (status < 0)
- pr_debug("%s: xfer %u -> %d\n",
- dev_name(&spi->dev), addr, status);
+ dev_dbg(&spi->dev, "xfer %u -> %d\n",
+ addr, status);
(void) dataflash_waitready(priv->spi);
}
@@ -374,7 +375,7 @@
command[2] = (addr & 0x0000FF00) >> 8;
command[3] = (addr & 0x000000FF);
- pr_debug("PROGRAM: (%x) %x %x %x\n",
+ dev_dbg(&spi->dev, "PROGRAM: (%x) %x %x %x\n",
command[0], command[1], command[2], command[3]);
x[1].tx_buf = writebuf;
@@ -383,8 +384,8 @@
status = spi_sync(spi, &msg);
spi_transfer_del(x + 1);
if (status < 0)
- pr_debug("%s: pgm %u/%u -> %d\n",
- dev_name(&spi->dev), addr, writelen, status);
+ dev_dbg(&spi->dev, "pgm %u/%u -> %d\n",
+ addr, writelen, status);
(void) dataflash_waitready(priv->spi);
@@ -398,20 +399,20 @@
command[2] = (addr & 0x0000FF00) >> 8;
command[3] = 0;
- pr_debug("COMPARE: (%x) %x %x %x\n",
+ dev_dbg(&spi->dev, "COMPARE: (%x) %x %x %x\n",
command[0], command[1], command[2], command[3]);
status = spi_sync(spi, &msg);
if (status < 0)
- pr_debug("%s: compare %u -> %d\n",
- dev_name(&spi->dev), addr, status);
+ dev_dbg(&spi->dev, "compare %u -> %d\n",
+ addr, status);
status = dataflash_waitready(priv->spi);
/* Check result of the compare operation */
if (status & (1 << 6)) {
- printk(KERN_ERR "%s: compare page %u, err %d\n",
- dev_name(&spi->dev), pageaddr, status);
+ dev_err(&spi->dev, "compare page %u, err %d\n",
+ pageaddr, status);
remaining = 0;
status = -EIO;
break;
@@ -455,11 +456,11 @@
}
static ssize_t otp_read(struct spi_device *spi, unsigned base,
- uint8_t *buf, loff_t off, size_t len)
+ u8 *buf, loff_t off, size_t len)
{
struct spi_message m;
size_t l;
- uint8_t *scratch;
+ u8 *scratch;
struct spi_transfer t;
int status;
@@ -538,7 +539,7 @@
{
struct spi_message m;
const size_t l = 4 + 64;
- uint8_t *scratch;
+ u8 *scratch;
struct spi_transfer t;
struct dataflash *priv = mtd->priv;
int status;
@@ -689,14 +690,15 @@
/* JEDEC id has a high byte of zero plus three data bytes:
* the manufacturer id, then a two byte device id.
*/
- uint32_t jedec_id;
+ u64 jedec_id;
/* The size listed here is what works with OP_ERASE_PAGE. */
unsigned nr_pages;
- uint16_t pagesize;
- uint16_t pageoffset;
+ u16 pagesize;
+ u16 pageoffset;
- uint16_t flags;
+ u16 flags;
+#define SUP_EXTID 0x0004 /* supports extended ID data */
#define SUP_POW2PS 0x0002 /* supports 2^N byte pages */
#define IS_POW2PS 0x0001 /* uses 2^N byte pages */
};
@@ -734,54 +736,32 @@
{ "AT45DB642x", 0x1f2800, 8192, 1056, 11, SUP_POW2PS},
{ "at45db642d", 0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS},
+
+ { "AT45DB641E", 0x1f28000100, 32768, 264, 9, SUP_EXTID | SUP_POW2PS},
+ { "at45db641e", 0x1f28000100, 32768, 256, 8, SUP_EXTID | SUP_POW2PS | IS_POW2PS},
};
-static struct flash_info *jedec_probe(struct spi_device *spi)
+static struct flash_info *jedec_lookup(struct spi_device *spi,
+ u64 jedec, bool use_extid)
{
- int tmp;
- uint8_t code = OP_READ_ID;
- uint8_t id[3];
- uint32_t jedec;
- struct flash_info *info;
+ struct flash_info *info;
int status;
- /* JEDEC also defines an optional "extended device information"
- * string for after vendor-specific data, after the three bytes
- * we use here. Supporting some chips might require using it.
- *
- * If the vendor ID isn't Atmel's (0x1f), assume this call failed.
- * That's not an error; only rev C and newer chips handle it, and
- * only Atmel sells these chips.
- */
- tmp = spi_write_then_read(spi, &code, 1, id, 3);
- if (tmp < 0) {
- pr_debug("%s: error %d reading JEDEC ID\n",
- dev_name(&spi->dev), tmp);
- return ERR_PTR(tmp);
- }
- if (id[0] != 0x1f)
- return NULL;
+ for (info = dataflash_data;
+ info < dataflash_data + ARRAY_SIZE(dataflash_data);
+ info++) {
+ if (use_extid && !(info->flags & SUP_EXTID))
+ continue;
- jedec = id[0];
- jedec = jedec << 8;
- jedec |= id[1];
- jedec = jedec << 8;
- jedec |= id[2];
-
- for (tmp = 0, info = dataflash_data;
- tmp < ARRAY_SIZE(dataflash_data);
- tmp++, info++) {
if (info->jedec_id == jedec) {
- pr_debug("%s: OTP, sector protect%s\n",
- dev_name(&spi->dev),
- (info->flags & SUP_POW2PS)
- ? ", binary pagesize" : ""
- );
+ dev_dbg(&spi->dev, "OTP, sector protect%s\n",
+ (info->flags & SUP_POW2PS) ?
+ ", binary pagesize" : "");
if (info->flags & SUP_POW2PS) {
status = dataflash_status(spi);
if (status < 0) {
- pr_debug("%s: status error %d\n",
- dev_name(&spi->dev), status);
+ dev_dbg(&spi->dev, "status error %d\n",
+ status);
return ERR_PTR(status);
}
if (status & 0x1) {
@@ -796,12 +776,58 @@
}
}
+ return ERR_PTR(-ENODEV);
+}
+
+static struct flash_info *jedec_probe(struct spi_device *spi)
+{
+ int ret;
+ u8 code = OP_READ_ID;
+ u64 jedec;
+ u8 id[sizeof(jedec)] = {0};
+ const unsigned int id_size = 5;
+ struct flash_info *info;
+
+ /*
+ * JEDEC also defines an optional "extended device information"
+ * string for after vendor-specific data, after the three bytes
+ * we use here. Supporting some chips might require using it.
+ *
+ * If the vendor ID isn't Atmel's (0x1f), assume this call failed.
+ * That's not an error; only rev C and newer chips handle it, and
+ * only Atmel sells these chips.
+ */
+ ret = spi_write_then_read(spi, &code, 1, id, id_size);
+ if (ret < 0) {
+ dev_dbg(&spi->dev, "error %d reading JEDEC ID\n", ret);
+ return ERR_PTR(ret);
+ }
+
+ if (id[0] != CFI_MFR_ATMEL)
+ return NULL;
+
+ jedec = be64_to_cpup((__be64 *)id);
+
+ /*
+ * First, try to match device using extended device
+ * information
+ */
+ info = jedec_lookup(spi, jedec >> DATAFLASH_SHIFT_EXTID, true);
+ if (!IS_ERR(info))
+ return info;
+ /*
+ * If that fails, make another pass using regular ID
+ * information
+ */
+ info = jedec_lookup(spi, jedec >> DATAFLASH_SHIFT_ID, false);
+ if (!IS_ERR(info))
+ return info;
/*
* Treat other chips as errors ... we won't know the right page
* size (it might be binary) even when we can tell which density
* class is involved (legacy chip id scheme).
*/
- dev_warn(&spi->dev, "JEDEC id %06x not handled\n", jedec);
+ dev_warn(&spi->dev, "JEDEC id %016llx not handled\n", jedec);
return ERR_PTR(-ENODEV);
}
@@ -845,8 +871,7 @@
*/
status = dataflash_status(spi);
if (status <= 0 || status == 0xff) {
- pr_debug("%s: status error %d\n",
- dev_name(&spi->dev), status);
+ dev_dbg(&spi->dev, "status error %d\n", status);
if (status == 0 || status == 0xff)
status = -ENODEV;
return status;
@@ -887,8 +912,7 @@
}
if (status < 0)
- pr_debug("%s: add_dataflash --> %d\n", dev_name(&spi->dev),
- status);
+ dev_dbg(&spi->dev, "add_dataflash --> %d\n", status);
return status;
}
@@ -898,7 +922,7 @@
struct dataflash *flash = spi_get_drvdata(spi);
int status;
- pr_debug("%s: remove\n", dev_name(&spi->dev));
+ dev_dbg(&spi->dev, "remove\n");
status = mtd_device_unregister(&flash->mtd);
if (status == 0)
diff --git a/drivers/mtd/devices/serial_flash_cmds.h b/drivers/mtd/devices/serial_flash_cmds.h
index 8b81e15..eba125c 100644
--- a/drivers/mtd/devices/serial_flash_cmds.h
+++ b/drivers/mtd/devices/serial_flash_cmds.h
@@ -13,7 +13,6 @@
#define _MTD_SERIAL_FLASH_CMDS_H
/* Generic Flash Commands/OPCODEs */
-#define SPINOR_OP_RDSR2 0x35
#define SPINOR_OP_WRVCR 0x81
#define SPINOR_OP_RDVCR 0x85
diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c
index 804313a..21afd94 100644
--- a/drivers/mtd/devices/st_spi_fsm.c
+++ b/drivers/mtd/devices/st_spi_fsm.c
@@ -1445,7 +1445,7 @@
}
/* Check status of 'QE' bit, update if required. */
- stfsm_read_status(fsm, SPINOR_OP_RDSR2, &cr1, 1);
+ stfsm_read_status(fsm, SPINOR_OP_RDCR, &cr1, 1);
data_pads = ((fsm->stfsm_seq_read.seq_cfg >> 16) & 0x3) + 1;
if (data_pads == 4) {
if (!(cr1 & STFSM_S25FL_CONFIG_QE)) {
@@ -1490,7 +1490,7 @@
return ret;
/* Check status of 'QE' bit, update if required. */
- stfsm_read_status(fsm, SPINOR_OP_RDSR2, &sr2, 1);
+ stfsm_read_status(fsm, SPINOR_OP_RDCR, &sr2, 1);
data_pads = ((fsm->stfsm_seq_read.seq_cfg >> 16) & 0x3) + 1;
if (data_pads == 4) {
if (!(sr2 & W25Q_STATUS_QE)) {
diff --git a/drivers/mtd/maps/physmap_of_gemini.c b/drivers/mtd/maps/physmap_of_gemini.c
index 9d371cd..05b286b 100644
--- a/drivers/mtd/maps/physmap_of_gemini.c
+++ b/drivers/mtd/maps/physmap_of_gemini.c
@@ -59,7 +59,7 @@
struct device_node *np,
struct map_info *map)
{
- static struct regmap *rmap;
+ struct regmap *rmap;
struct device *dev = &pdev->dev;
u32 val;
int ret;
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 1517da3..956382c 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -991,7 +991,7 @@
/* We probably shouldn't allow XIP if the unpoint isn't a NULL */
int mtd_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
{
- if (!mtd->_point)
+ if (!mtd->_unpoint)
return -EOPNOTSUPP;
if (from < 0 || from >= mtd->size || len > mtd->size - from)
return -EINVAL;
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index ea5e530..5736b0c 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -37,10 +37,16 @@
static LIST_HEAD(mtd_partitions);
static DEFINE_MUTEX(mtd_partitions_mutex);
-/* Our partition node structure */
+/**
+ * struct mtd_part - our partition node structure
+ *
+ * @mtd: struct holding partition details
+ * @parent: parent mtd - flash device or another partition
+ * @offset: partition offset relative to the *flash device*
+ */
struct mtd_part {
struct mtd_info mtd;
- struct mtd_info *master;
+ struct mtd_info *parent;
uint64_t offset;
struct list_head list;
};
@@ -67,15 +73,15 @@
struct mtd_ecc_stats stats;
int res;
- stats = part->master->ecc_stats;
- res = part->master->_read(part->master, from + part->offset, len,
+ stats = part->parent->ecc_stats;
+ res = part->parent->_read(part->parent, from + part->offset, len,
retlen, buf);
if (unlikely(mtd_is_eccerr(res)))
mtd->ecc_stats.failed +=
- part->master->ecc_stats.failed - stats.failed;
+ part->parent->ecc_stats.failed - stats.failed;
else
mtd->ecc_stats.corrected +=
- part->master->ecc_stats.corrected - stats.corrected;
+ part->parent->ecc_stats.corrected - stats.corrected;
return res;
}
@@ -84,7 +90,7 @@
{
struct mtd_part *part = mtd_to_part(mtd);
- return part->master->_point(part->master, from + part->offset, len,
+ return part->parent->_point(part->parent, from + part->offset, len,
retlen, virt, phys);
}
@@ -92,7 +98,7 @@
{
struct mtd_part *part = mtd_to_part(mtd);
- return part->master->_unpoint(part->master, from + part->offset, len);
+ return part->parent->_unpoint(part->parent, from + part->offset, len);
}
static unsigned long part_get_unmapped_area(struct mtd_info *mtd,
@@ -103,7 +109,7 @@
struct mtd_part *part = mtd_to_part(mtd);
offset += part->offset;
- return part->master->_get_unmapped_area(part->master, len, offset,
+ return part->parent->_get_unmapped_area(part->parent, len, offset,
flags);
}
@@ -132,7 +138,7 @@
return -EINVAL;
}
- res = part->master->_read_oob(part->master, from + part->offset, ops);
+ res = part->parent->_read_oob(part->parent, from + part->offset, ops);
if (unlikely(res)) {
if (mtd_is_bitflip(res))
mtd->ecc_stats.corrected++;
@@ -146,7 +152,7 @@
size_t len, size_t *retlen, u_char *buf)
{
struct mtd_part *part = mtd_to_part(mtd);
- return part->master->_read_user_prot_reg(part->master, from, len,
+ return part->parent->_read_user_prot_reg(part->parent, from, len,
retlen, buf);
}
@@ -154,7 +160,7 @@
size_t *retlen, struct otp_info *buf)
{
struct mtd_part *part = mtd_to_part(mtd);
- return part->master->_get_user_prot_info(part->master, len, retlen,
+ return part->parent->_get_user_prot_info(part->parent, len, retlen,
buf);
}
@@ -162,7 +168,7 @@
size_t len, size_t *retlen, u_char *buf)
{
struct mtd_part *part = mtd_to_part(mtd);
- return part->master->_read_fact_prot_reg(part->master, from, len,
+ return part->parent->_read_fact_prot_reg(part->parent, from, len,
retlen, buf);
}
@@ -170,7 +176,7 @@
size_t *retlen, struct otp_info *buf)
{
struct mtd_part *part = mtd_to_part(mtd);
- return part->master->_get_fact_prot_info(part->master, len, retlen,
+ return part->parent->_get_fact_prot_info(part->parent, len, retlen,
buf);
}
@@ -178,7 +184,7 @@
size_t *retlen, const u_char *buf)
{
struct mtd_part *part = mtd_to_part(mtd);
- return part->master->_write(part->master, to + part->offset, len,
+ return part->parent->_write(part->parent, to + part->offset, len,
retlen, buf);
}
@@ -186,7 +192,7 @@
size_t *retlen, const u_char *buf)
{
struct mtd_part *part = mtd_to_part(mtd);
- return part->master->_panic_write(part->master, to + part->offset, len,
+ return part->parent->_panic_write(part->parent, to + part->offset, len,
retlen, buf);
}
@@ -199,14 +205,14 @@
return -EINVAL;
if (ops->datbuf && to + ops->len > mtd->size)
return -EINVAL;
- return part->master->_write_oob(part->master, to + part->offset, ops);
+ return part->parent->_write_oob(part->parent, to + part->offset, ops);
}
static int part_write_user_prot_reg(struct mtd_info *mtd, loff_t from,
size_t len, size_t *retlen, u_char *buf)
{
struct mtd_part *part = mtd_to_part(mtd);
- return part->master->_write_user_prot_reg(part->master, from, len,
+ return part->parent->_write_user_prot_reg(part->parent, from, len,
retlen, buf);
}
@@ -214,14 +220,14 @@
size_t len)
{
struct mtd_part *part = mtd_to_part(mtd);
- return part->master->_lock_user_prot_reg(part->master, from, len);
+ return part->parent->_lock_user_prot_reg(part->parent, from, len);
}
static int part_writev(struct mtd_info *mtd, const struct kvec *vecs,
unsigned long count, loff_t to, size_t *retlen)
{
struct mtd_part *part = mtd_to_part(mtd);
- return part->master->_writev(part->master, vecs, count,
+ return part->parent->_writev(part->parent, vecs, count,
to + part->offset, retlen);
}
@@ -231,7 +237,7 @@
int ret;
instr->addr += part->offset;
- ret = part->master->_erase(part->master, instr);
+ ret = part->parent->_erase(part->parent, instr);
if (ret) {
if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
instr->fail_addr -= part->offset;
@@ -257,51 +263,51 @@
static int part_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
{
struct mtd_part *part = mtd_to_part(mtd);
- return part->master->_lock(part->master, ofs + part->offset, len);
+ return part->parent->_lock(part->parent, ofs + part->offset, len);
}
static int part_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
{
struct mtd_part *part = mtd_to_part(mtd);
- return part->master->_unlock(part->master, ofs + part->offset, len);
+ return part->parent->_unlock(part->parent, ofs + part->offset, len);
}
static int part_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
{
struct mtd_part *part = mtd_to_part(mtd);
- return part->master->_is_locked(part->master, ofs + part->offset, len);
+ return part->parent->_is_locked(part->parent, ofs + part->offset, len);
}
static void part_sync(struct mtd_info *mtd)
{
struct mtd_part *part = mtd_to_part(mtd);
- part->master->_sync(part->master);
+ part->parent->_sync(part->parent);
}
static int part_suspend(struct mtd_info *mtd)
{
struct mtd_part *part = mtd_to_part(mtd);
- return part->master->_suspend(part->master);
+ return part->parent->_suspend(part->parent);
}
static void part_resume(struct mtd_info *mtd)
{
struct mtd_part *part = mtd_to_part(mtd);
- part->master->_resume(part->master);
+ part->parent->_resume(part->parent);
}
static int part_block_isreserved(struct mtd_info *mtd, loff_t ofs)
{
struct mtd_part *part = mtd_to_part(mtd);
ofs += part->offset;
- return part->master->_block_isreserved(part->master, ofs);
+ return part->parent->_block_isreserved(part->parent, ofs);
}
static int part_block_isbad(struct mtd_info *mtd, loff_t ofs)
{
struct mtd_part *part = mtd_to_part(mtd);
ofs += part->offset;
- return part->master->_block_isbad(part->master, ofs);
+ return part->parent->_block_isbad(part->parent, ofs);
}
static int part_block_markbad(struct mtd_info *mtd, loff_t ofs)
@@ -310,7 +316,7 @@
int res;
ofs += part->offset;
- res = part->master->_block_markbad(part->master, ofs);
+ res = part->parent->_block_markbad(part->parent, ofs);
if (!res)
mtd->ecc_stats.badblocks++;
return res;
@@ -319,13 +325,13 @@
static int part_get_device(struct mtd_info *mtd)
{
struct mtd_part *part = mtd_to_part(mtd);
- return part->master->_get_device(part->master);
+ return part->parent->_get_device(part->parent);
}
static void part_put_device(struct mtd_info *mtd)
{
struct mtd_part *part = mtd_to_part(mtd);
- part->master->_put_device(part->master);
+ part->parent->_put_device(part->parent);
}
static int part_ooblayout_ecc(struct mtd_info *mtd, int section,
@@ -333,7 +339,7 @@
{
struct mtd_part *part = mtd_to_part(mtd);
- return mtd_ooblayout_ecc(part->master, section, oobregion);
+ return mtd_ooblayout_ecc(part->parent, section, oobregion);
}
static int part_ooblayout_free(struct mtd_info *mtd, int section,
@@ -341,7 +347,7 @@
{
struct mtd_part *part = mtd_to_part(mtd);
- return mtd_ooblayout_free(part->master, section, oobregion);
+ return mtd_ooblayout_free(part->parent, section, oobregion);
}
static const struct mtd_ooblayout_ops part_ooblayout_ops = {
@@ -353,7 +359,7 @@
{
struct mtd_part *part = mtd_to_part(mtd);
- return part->master->_max_bad_blocks(part->master,
+ return part->parent->_max_bad_blocks(part->parent,
ofs + part->offset, len);
}
@@ -363,63 +369,70 @@
kfree(p);
}
-/*
- * This function unregisters and destroy all slave MTD objects which are
- * attached to the given master MTD object.
+/**
+ * mtd_parse_part - parse MTD partition looking for subpartitions
+ *
+ * @slave: part that is supposed to be a container and should be parsed
+ * @types: NULL-terminated array with names of partition parsers to try
+ *
+ * Some partitions are kind of containers with extra subpartitions (volumes).
+ * There can be various formats of such containers. This function tries to use
+ * specified parsers to analyze given partition and registers found
+ * subpartitions on success.
*/
-
-int del_mtd_partitions(struct mtd_info *master)
+static int mtd_parse_part(struct mtd_part *slave, const char *const *types)
{
- struct mtd_part *slave, *next;
- int ret, err = 0;
+ struct mtd_partitions parsed;
+ int err;
- mutex_lock(&mtd_partitions_mutex);
- list_for_each_entry_safe(slave, next, &mtd_partitions, list)
- if (slave->master == master) {
- ret = del_mtd_device(&slave->mtd);
- if (ret < 0) {
- err = ret;
- continue;
- }
- list_del(&slave->list);
- free_partition(slave);
- }
- mutex_unlock(&mtd_partitions_mutex);
+ err = parse_mtd_partitions(&slave->mtd, types, &parsed, NULL);
+ if (err)
+ return err;
+ else if (!parsed.nr_parts)
+ return -ENOENT;
+
+ err = add_mtd_partitions(&slave->mtd, parsed.parts, parsed.nr_parts);
+
+ mtd_part_parser_cleanup(&parsed);
return err;
}
-static struct mtd_part *allocate_partition(struct mtd_info *master,
+static struct mtd_part *allocate_partition(struct mtd_info *parent,
const struct mtd_partition *part, int partno,
uint64_t cur_offset)
{
+ int wr_alignment = (parent->flags & MTD_NO_ERASE) ? parent->writesize :
+ parent->erasesize;
struct mtd_part *slave;
+ u32 remainder;
char *name;
+ u64 tmp;
/* allocate the partition structure */
slave = kzalloc(sizeof(*slave), GFP_KERNEL);
name = kstrdup(part->name, GFP_KERNEL);
if (!name || !slave) {
printk(KERN_ERR"memory allocation error while creating partitions for \"%s\"\n",
- master->name);
+ parent->name);
kfree(name);
kfree(slave);
return ERR_PTR(-ENOMEM);
}
/* set up the MTD object for this partition */
- slave->mtd.type = master->type;
- slave->mtd.flags = master->flags & ~part->mask_flags;
+ slave->mtd.type = parent->type;
+ slave->mtd.flags = parent->flags & ~part->mask_flags;
slave->mtd.size = part->size;
- slave->mtd.writesize = master->writesize;
- slave->mtd.writebufsize = master->writebufsize;
- slave->mtd.oobsize = master->oobsize;
- slave->mtd.oobavail = master->oobavail;
- slave->mtd.subpage_sft = master->subpage_sft;
- slave->mtd.pairing = master->pairing;
+ slave->mtd.writesize = parent->writesize;
+ slave->mtd.writebufsize = parent->writebufsize;
+ slave->mtd.oobsize = parent->oobsize;
+ slave->mtd.oobavail = parent->oobavail;
+ slave->mtd.subpage_sft = parent->subpage_sft;
+ slave->mtd.pairing = parent->pairing;
slave->mtd.name = name;
- slave->mtd.owner = master->owner;
+ slave->mtd.owner = parent->owner;
/* NOTE: Historically, we didn't arrange MTDs as a tree out of
* concern for showing the same data in multiple partitions.
@@ -429,80 +442,81 @@
* parent conditional on that option. Note, this is a way to
* distinguish between the master and the partition in sysfs.
*/
- slave->mtd.dev.parent = IS_ENABLED(CONFIG_MTD_PARTITIONED_MASTER) ?
- &master->dev :
- master->dev.parent;
+ slave->mtd.dev.parent = IS_ENABLED(CONFIG_MTD_PARTITIONED_MASTER) || mtd_is_partition(parent) ?
+ &parent->dev :
+ parent->dev.parent;
slave->mtd.dev.of_node = part->of_node;
slave->mtd._read = part_read;
slave->mtd._write = part_write;
- if (master->_panic_write)
+ if (parent->_panic_write)
slave->mtd._panic_write = part_panic_write;
- if (master->_point && master->_unpoint) {
+ if (parent->_point && parent->_unpoint) {
slave->mtd._point = part_point;
slave->mtd._unpoint = part_unpoint;
}
- if (master->_get_unmapped_area)
+ if (parent->_get_unmapped_area)
slave->mtd._get_unmapped_area = part_get_unmapped_area;
- if (master->_read_oob)
+ if (parent->_read_oob)
slave->mtd._read_oob = part_read_oob;
- if (master->_write_oob)
+ if (parent->_write_oob)
slave->mtd._write_oob = part_write_oob;
- if (master->_read_user_prot_reg)
+ if (parent->_read_user_prot_reg)
slave->mtd._read_user_prot_reg = part_read_user_prot_reg;
- if (master->_read_fact_prot_reg)
+ if (parent->_read_fact_prot_reg)
slave->mtd._read_fact_prot_reg = part_read_fact_prot_reg;
- if (master->_write_user_prot_reg)
+ if (parent->_write_user_prot_reg)
slave->mtd._write_user_prot_reg = part_write_user_prot_reg;
- if (master->_lock_user_prot_reg)
+ if (parent->_lock_user_prot_reg)
slave->mtd._lock_user_prot_reg = part_lock_user_prot_reg;
- if (master->_get_user_prot_info)
+ if (parent->_get_user_prot_info)
slave->mtd._get_user_prot_info = part_get_user_prot_info;
- if (master->_get_fact_prot_info)
+ if (parent->_get_fact_prot_info)
slave->mtd._get_fact_prot_info = part_get_fact_prot_info;
- if (master->_sync)
+ if (parent->_sync)
slave->mtd._sync = part_sync;
- if (!partno && !master->dev.class && master->_suspend &&
- master->_resume) {
- slave->mtd._suspend = part_suspend;
- slave->mtd._resume = part_resume;
+ if (!partno && !parent->dev.class && parent->_suspend &&
+ parent->_resume) {
+ slave->mtd._suspend = part_suspend;
+ slave->mtd._resume = part_resume;
}
- if (master->_writev)
+ if (parent->_writev)
slave->mtd._writev = part_writev;
- if (master->_lock)
+ if (parent->_lock)
slave->mtd._lock = part_lock;
- if (master->_unlock)
+ if (parent->_unlock)
slave->mtd._unlock = part_unlock;
- if (master->_is_locked)
+ if (parent->_is_locked)
slave->mtd._is_locked = part_is_locked;
- if (master->_block_isreserved)
+ if (parent->_block_isreserved)
slave->mtd._block_isreserved = part_block_isreserved;
- if (master->_block_isbad)
+ if (parent->_block_isbad)
slave->mtd._block_isbad = part_block_isbad;
- if (master->_block_markbad)
+ if (parent->_block_markbad)
slave->mtd._block_markbad = part_block_markbad;
- if (master->_max_bad_blocks)
+ if (parent->_max_bad_blocks)
slave->mtd._max_bad_blocks = part_max_bad_blocks;
- if (master->_get_device)
+ if (parent->_get_device)
slave->mtd._get_device = part_get_device;
- if (master->_put_device)
+ if (parent->_put_device)
slave->mtd._put_device = part_put_device;
slave->mtd._erase = part_erase;
- slave->master = master;
+ slave->parent = parent;
slave->offset = part->offset;
if (slave->offset == MTDPART_OFS_APPEND)
slave->offset = cur_offset;
if (slave->offset == MTDPART_OFS_NXTBLK) {
+ tmp = cur_offset;
slave->offset = cur_offset;
- if (mtd_mod_by_eb(cur_offset, master) != 0) {
- /* Round up to next erasesize */
- slave->offset = (mtd_div_by_eb(cur_offset, master) + 1) * master->erasesize;
+ remainder = do_div(tmp, wr_alignment);
+ if (remainder) {
+ slave->offset += wr_alignment - remainder;
printk(KERN_NOTICE "Moving partition %d: "
"0x%012llx -> 0x%012llx\n", partno,
(unsigned long long)cur_offset, (unsigned long long)slave->offset);
@@ -510,25 +524,25 @@
}
if (slave->offset == MTDPART_OFS_RETAIN) {
slave->offset = cur_offset;
- if (master->size - slave->offset >= slave->mtd.size) {
- slave->mtd.size = master->size - slave->offset
+ if (parent->size - slave->offset >= slave->mtd.size) {
+ slave->mtd.size = parent->size - slave->offset
- slave->mtd.size;
} else {
printk(KERN_ERR "mtd partition \"%s\" doesn't have enough space: %#llx < %#llx, disabled\n",
- part->name, master->size - slave->offset,
+ part->name, parent->size - slave->offset,
slave->mtd.size);
/* register to preserve ordering */
goto out_register;
}
}
if (slave->mtd.size == MTDPART_SIZ_FULL)
- slave->mtd.size = master->size - slave->offset;
+ slave->mtd.size = parent->size - slave->offset;
printk(KERN_NOTICE "0x%012llx-0x%012llx : \"%s\"\n", (unsigned long long)slave->offset,
(unsigned long long)(slave->offset + slave->mtd.size), slave->mtd.name);
/* let's do some sanity checks */
- if (slave->offset >= master->size) {
+ if (slave->offset >= parent->size) {
/* let's register it anyway to preserve ordering */
slave->offset = 0;
slave->mtd.size = 0;
@@ -536,16 +550,16 @@
part->name);
goto out_register;
}
- if (slave->offset + slave->mtd.size > master->size) {
- slave->mtd.size = master->size - slave->offset;
+ if (slave->offset + slave->mtd.size > parent->size) {
+ slave->mtd.size = parent->size - slave->offset;
printk(KERN_WARNING"mtd: partition \"%s\" extends beyond the end of device \"%s\" -- size truncated to %#llx\n",
- part->name, master->name, (unsigned long long)slave->mtd.size);
+ part->name, parent->name, (unsigned long long)slave->mtd.size);
}
- if (master->numeraseregions > 1) {
+ if (parent->numeraseregions > 1) {
/* Deal with variable erase size stuff */
- int i, max = master->numeraseregions;
+ int i, max = parent->numeraseregions;
u64 end = slave->offset + slave->mtd.size;
- struct mtd_erase_region_info *regions = master->eraseregions;
+ struct mtd_erase_region_info *regions = parent->eraseregions;
/* Find the first erase regions which is part of this
* partition. */
@@ -564,37 +578,40 @@
BUG_ON(slave->mtd.erasesize == 0);
} else {
/* Single erase size */
- slave->mtd.erasesize = master->erasesize;
+ slave->mtd.erasesize = parent->erasesize;
}
- if ((slave->mtd.flags & MTD_WRITEABLE) &&
- mtd_mod_by_eb(slave->offset, &slave->mtd)) {
+ tmp = slave->offset;
+ remainder = do_div(tmp, wr_alignment);
+ if ((slave->mtd.flags & MTD_WRITEABLE) && remainder) {
/* Doesn't start on a boundary of major erase size */
/* FIXME: Let it be writable if it is on a boundary of
* _minor_ erase size though */
slave->mtd.flags &= ~MTD_WRITEABLE;
- printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n",
+ printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase/write block boundary -- force read-only\n",
part->name);
}
- if ((slave->mtd.flags & MTD_WRITEABLE) &&
- mtd_mod_by_eb(slave->mtd.size, &slave->mtd)) {
+
+ tmp = slave->mtd.size;
+ remainder = do_div(tmp, wr_alignment);
+ if ((slave->mtd.flags & MTD_WRITEABLE) && remainder) {
slave->mtd.flags &= ~MTD_WRITEABLE;
- printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n",
+ printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase/write block -- force read-only\n",
part->name);
}
mtd_set_ooblayout(&slave->mtd, &part_ooblayout_ops);
- slave->mtd.ecc_step_size = master->ecc_step_size;
- slave->mtd.ecc_strength = master->ecc_strength;
- slave->mtd.bitflip_threshold = master->bitflip_threshold;
+ slave->mtd.ecc_step_size = parent->ecc_step_size;
+ slave->mtd.ecc_strength = parent->ecc_strength;
+ slave->mtd.bitflip_threshold = parent->bitflip_threshold;
- if (master->_block_isbad) {
+ if (parent->_block_isbad) {
uint64_t offs = 0;
while (offs < slave->mtd.size) {
- if (mtd_block_isreserved(master, offs + slave->offset))
+ if (mtd_block_isreserved(parent, offs + slave->offset))
slave->mtd.ecc_stats.bbtblocks++;
- else if (mtd_block_isbad(master, offs + slave->offset))
+ else if (mtd_block_isbad(parent, offs + slave->offset))
slave->mtd.ecc_stats.badblocks++;
offs += slave->mtd.erasesize;
}
@@ -628,7 +645,7 @@
return ret;
}
-int mtd_add_partition(struct mtd_info *master, const char *name,
+int mtd_add_partition(struct mtd_info *parent, const char *name,
long long offset, long long length)
{
struct mtd_partition part;
@@ -641,7 +658,7 @@
return -EINVAL;
if (length == MTDPART_SIZ_FULL)
- length = master->size - offset;
+ length = parent->size - offset;
if (length <= 0)
return -EINVAL;
@@ -651,7 +668,7 @@
part.size = length;
part.offset = offset;
- new = allocate_partition(master, &part, -1, offset);
+ new = allocate_partition(parent, &part, -1, offset);
if (IS_ERR(new))
return PTR_ERR(new);
@@ -667,23 +684,69 @@
}
EXPORT_SYMBOL_GPL(mtd_add_partition);
-int mtd_del_partition(struct mtd_info *master, int partno)
+/**
+ * __mtd_del_partition - delete MTD partition
+ *
+ * @priv: internal MTD struct for partition to be deleted
+ *
+ * This function must be called with the partitions mutex locked.
+ */
+static int __mtd_del_partition(struct mtd_part *priv)
+{
+ struct mtd_part *child, *next;
+ int err;
+
+ list_for_each_entry_safe(child, next, &mtd_partitions, list) {
+ if (child->parent == &priv->mtd) {
+ err = __mtd_del_partition(child);
+ if (err)
+ return err;
+ }
+ }
+
+ sysfs_remove_files(&priv->mtd.dev.kobj, mtd_partition_attrs);
+
+ err = del_mtd_device(&priv->mtd);
+ if (err)
+ return err;
+
+ list_del(&priv->list);
+ free_partition(priv);
+
+ return 0;
+}
+
+/*
+ * This function unregisters and destroy all slave MTD objects which are
+ * attached to the given MTD object.
+ */
+int del_mtd_partitions(struct mtd_info *mtd)
+{
+ struct mtd_part *slave, *next;
+ int ret, err = 0;
+
+ mutex_lock(&mtd_partitions_mutex);
+ list_for_each_entry_safe(slave, next, &mtd_partitions, list)
+ if (slave->parent == mtd) {
+ ret = __mtd_del_partition(slave);
+ if (ret < 0)
+ err = ret;
+ }
+ mutex_unlock(&mtd_partitions_mutex);
+
+ return err;
+}
+
+int mtd_del_partition(struct mtd_info *mtd, int partno)
{
struct mtd_part *slave, *next;
int ret = -EINVAL;
mutex_lock(&mtd_partitions_mutex);
list_for_each_entry_safe(slave, next, &mtd_partitions, list)
- if ((slave->master == master) &&
+ if ((slave->parent == mtd) &&
(slave->mtd.index == partno)) {
- sysfs_remove_files(&slave->mtd.dev.kobj,
- mtd_partition_attrs);
- ret = del_mtd_device(&slave->mtd);
- if (ret < 0)
- break;
-
- list_del(&slave->list);
- free_partition(slave);
+ ret = __mtd_del_partition(slave);
break;
}
mutex_unlock(&mtd_partitions_mutex);
@@ -724,6 +787,8 @@
add_mtd_device(&slave->mtd);
mtd_add_partition_attrs(slave);
+ if (parts[i].types)
+ mtd_parse_part(slave, parts[i].types);
cur_offset = slave->offset + slave->mtd.size;
}
@@ -799,6 +864,27 @@
NULL
};
+static int mtd_part_do_parse(struct mtd_part_parser *parser,
+ struct mtd_info *master,
+ struct mtd_partitions *pparts,
+ struct mtd_part_parser_data *data)
+{
+ int ret;
+
+ ret = (*parser->parse_fn)(master, &pparts->parts, data);
+ pr_debug("%s: parser %s: %i\n", master->name, parser->name, ret);
+ if (ret <= 0)
+ return ret;
+
+ pr_notice("%d %s partitions found on MTD device %s\n", ret,
+ parser->name, master->name);
+
+ pparts->nr_parts = ret;
+ pparts->parser = parser;
+
+ return ret;
+}
+
/**
* parse_mtd_partitions - parse MTD partitions
* @master: the master partition (describes whole MTD device)
@@ -839,16 +925,10 @@
parser ? parser->name : NULL);
if (!parser)
continue;
- ret = (*parser->parse_fn)(master, &pparts->parts, data);
- pr_debug("%s: parser %s: %i\n",
- master->name, parser->name, ret);
- if (ret > 0) {
- printk(KERN_NOTICE "%d %s partitions found on MTD device %s\n",
- ret, parser->name, master->name);
- pparts->nr_parts = ret;
- pparts->parser = parser;
+ ret = mtd_part_do_parse(parser, master, pparts, data);
+ /* Found partitions! */
+ if (ret > 0)
return 0;
- }
mtd_part_parser_put(parser);
/*
* Stash the first error we see; only report it if no parser
@@ -899,6 +979,6 @@
if (!mtd_is_partition(mtd))
return mtd->size;
- return mtd_to_part(mtd)->master->size;
+ return mtd_get_device_size(mtd_to_part(mtd)->parent);
}
EXPORT_SYMBOL_GPL(mtd_get_device_size);
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index c302952..dbfa72d 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -308,6 +308,7 @@
config MTD_NAND_ATMEL
tristate "Support for NAND Flash / SmartMedia on AT91"
depends on ARCH_AT91
+ select MFD_ATMEL_SMC
help
Enables support for NAND Flash / Smart Media Card interface
on Atmel AT91 processors.
@@ -542,6 +543,7 @@
config MTD_NAND_HISI504
tristate "Support for NAND controller on Hisilicon SoC Hip04"
+ depends on ARCH_HISI || COMPILE_TEST
depends on HAS_DMA
help
Enables support for NAND controller on Hisilicon SoC Hip04.
@@ -555,6 +557,7 @@
config MTD_NAND_MTK
tristate "Support for NAND controller on MTK SoCs"
+ depends on ARCH_MEDIATEK || COMPILE_TEST
depends on HAS_DMA
help
Enables support for NAND controller on MTK SoCs.
diff --git a/drivers/mtd/nand/atmel/nand-controller.c b/drivers/mtd/nand/atmel/nand-controller.c
index 3b24468..d922a88 100644
--- a/drivers/mtd/nand/atmel/nand-controller.c
+++ b/drivers/mtd/nand/atmel/nand-controller.c
@@ -57,6 +57,7 @@
#include <linux/interrupt.h>
#include <linux/mfd/syscon.h>
#include <linux/mfd/syscon/atmel-matrix.h>
+#include <linux/mfd/syscon/atmel-smc.h>
#include <linux/module.h>
#include <linux/mtd/nand.h>
#include <linux/of_address.h>
@@ -64,7 +65,6 @@
#include <linux/of_platform.h>
#include <linux/iopoll.h>
#include <linux/platform_device.h>
-#include <linux/platform_data/atmel.h>
#include <linux/regmap.h>
#include "pmecc.h"
@@ -151,6 +151,8 @@
void __iomem *virt;
dma_addr_t dma;
} io;
+
+ struct atmel_smc_cs_conf smcconf;
};
struct atmel_nand {
@@ -196,6 +198,8 @@
void (*nand_init)(struct atmel_nand_controller *nc,
struct atmel_nand *nand);
int (*ecc_init)(struct atmel_nand *nand);
+ int (*setup_data_interface)(struct atmel_nand *nand, int csline,
+ const struct nand_data_interface *conf);
};
struct atmel_nand_controller_caps {
@@ -912,7 +916,7 @@
struct mtd_info *mtd = nand_to_mtd(chip);
struct atmel_nand *nand = to_atmel_nand(chip);
struct atmel_hsmc_nand_controller *nc;
- int ret;
+ int ret, status;
nc = to_hsmc_nand_controller(chip->controller);
@@ -954,6 +958,10 @@
dev_err(nc->base.dev, "Failed to program NAND page (err = %d)\n",
ret);
+ status = chip->waitfunc(mtd, chip);
+ if (status & NAND_STATUS_FAIL)
+ return -EIO;
+
return ret;
}
@@ -1175,6 +1183,295 @@
return 0;
}
+static int atmel_smc_nand_prepare_smcconf(struct atmel_nand *nand,
+ const struct nand_data_interface *conf,
+ struct atmel_smc_cs_conf *smcconf)
+{
+ u32 ncycles, totalcycles, timeps, mckperiodps;
+ struct atmel_nand_controller *nc;
+ int ret;
+
+ nc = to_nand_controller(nand->base.controller);
+
+ /* DDR interface not supported. */
+ if (conf->type != NAND_SDR_IFACE)
+ return -ENOTSUPP;
+
+ /*
+ * tRC < 30ns implies EDO mode. This controller does not support this
+ * mode.
+ */
+ if (conf->timings.sdr.tRC_min < 30)
+ return -ENOTSUPP;
+
+ atmel_smc_cs_conf_init(smcconf);
+
+ mckperiodps = NSEC_PER_SEC / clk_get_rate(nc->mck);
+ mckperiodps *= 1000;
+
+ /*
+ * Set write pulse timing. This one is easy to extract:
+ *
+ * NWE_PULSE = tWP
+ */
+ ncycles = DIV_ROUND_UP(conf->timings.sdr.tWP_min, mckperiodps);
+ totalcycles = ncycles;
+ ret = atmel_smc_cs_conf_set_pulse(smcconf, ATMEL_SMC_NWE_SHIFT,
+ ncycles);
+ if (ret)
+ return ret;
+
+ /*
+ * The write setup timing depends on the operation done on the NAND.
+ * All operations goes through the same data bus, but the operation
+ * type depends on the address we are writing to (ALE/CLE address
+ * lines).
+ * Since we have no way to differentiate the different operations at
+ * the SMC level, we must consider the worst case (the biggest setup
+ * time among all operation types):
+ *
+ * NWE_SETUP = max(tCLS, tCS, tALS, tDS) - NWE_PULSE
+ */
+ timeps = max3(conf->timings.sdr.tCLS_min, conf->timings.sdr.tCS_min,
+ conf->timings.sdr.tALS_min);
+ timeps = max(timeps, conf->timings.sdr.tDS_min);
+ ncycles = DIV_ROUND_UP(timeps, mckperiodps);
+ ncycles = ncycles > totalcycles ? ncycles - totalcycles : 0;
+ totalcycles += ncycles;
+ ret = atmel_smc_cs_conf_set_setup(smcconf, ATMEL_SMC_NWE_SHIFT,
+ ncycles);
+ if (ret)
+ return ret;
+
+ /*
+ * As for the write setup timing, the write hold timing depends on the
+ * operation done on the NAND:
+ *
+ * NWE_HOLD = max(tCLH, tCH, tALH, tDH, tWH)
+ */
+ timeps = max3(conf->timings.sdr.tCLH_min, conf->timings.sdr.tCH_min,
+ conf->timings.sdr.tALH_min);
+ timeps = max3(timeps, conf->timings.sdr.tDH_min,
+ conf->timings.sdr.tWH_min);
+ ncycles = DIV_ROUND_UP(timeps, mckperiodps);
+ totalcycles += ncycles;
+
+ /*
+ * The write cycle timing is directly matching tWC, but is also
+ * dependent on the other timings on the setup and hold timings we
+ * calculated earlier, which gives:
+ *
+ * NWE_CYCLE = max(tWC, NWE_SETUP + NWE_PULSE + NWE_HOLD)
+ */
+ ncycles = DIV_ROUND_UP(conf->timings.sdr.tWC_min, mckperiodps);
+ ncycles = max(totalcycles, ncycles);
+ ret = atmel_smc_cs_conf_set_cycle(smcconf, ATMEL_SMC_NWE_SHIFT,
+ ncycles);
+ if (ret)
+ return ret;
+
+ /*
+ * We don't want the CS line to be toggled between each byte/word
+ * transfer to the NAND. The only way to guarantee that is to have the
+ * NCS_{WR,RD}_{SETUP,HOLD} timings set to 0, which in turn means:
+ *
+ * NCS_WR_PULSE = NWE_CYCLE
+ */
+ ret = atmel_smc_cs_conf_set_pulse(smcconf, ATMEL_SMC_NCS_WR_SHIFT,
+ ncycles);
+ if (ret)
+ return ret;
+
+ /*
+ * As for the write setup timing, the read hold timing depends on the
+ * operation done on the NAND:
+ *
+ * NRD_HOLD = max(tREH, tRHOH)
+ */
+ timeps = max(conf->timings.sdr.tREH_min, conf->timings.sdr.tRHOH_min);
+ ncycles = DIV_ROUND_UP(timeps, mckperiodps);
+ totalcycles = ncycles;
+
+ /*
+ * TDF = tRHZ - NRD_HOLD
+ */
+ ncycles = DIV_ROUND_UP(conf->timings.sdr.tRHZ_max, mckperiodps);
+ ncycles -= totalcycles;
+
+ /*
+ * In ONFI 4.0 specs, tRHZ has been increased to support EDO NANDs and
+ * we might end up with a config that does not fit in the TDF field.
+ * Just take the max value in this case and hope that the NAND is more
+ * tolerant than advertised.
+ */
+ if (ncycles > ATMEL_SMC_MODE_TDF_MAX)
+ ncycles = ATMEL_SMC_MODE_TDF_MAX;
+ else if (ncycles < ATMEL_SMC_MODE_TDF_MIN)
+ ncycles = ATMEL_SMC_MODE_TDF_MIN;
+
+ smcconf->mode |= ATMEL_SMC_MODE_TDF(ncycles) |
+ ATMEL_SMC_MODE_TDFMODE_OPTIMIZED;
+
+ /*
+ * Read pulse timing directly matches tRP:
+ *
+ * NRD_PULSE = tRP
+ */
+ ncycles = DIV_ROUND_UP(conf->timings.sdr.tRP_min, mckperiodps);
+ totalcycles += ncycles;
+ ret = atmel_smc_cs_conf_set_pulse(smcconf, ATMEL_SMC_NRD_SHIFT,
+ ncycles);
+ if (ret)
+ return ret;
+
+ /*
+ * The write cycle timing is directly matching tWC, but is also
+ * dependent on the setup and hold timings we calculated earlier,
+ * which gives:
+ *
+ * NRD_CYCLE = max(tRC, NRD_PULSE + NRD_HOLD)
+ *
+ * NRD_SETUP is always 0.
+ */
+ ncycles = DIV_ROUND_UP(conf->timings.sdr.tRC_min, mckperiodps);
+ ncycles = max(totalcycles, ncycles);
+ ret = atmel_smc_cs_conf_set_cycle(smcconf, ATMEL_SMC_NRD_SHIFT,
+ ncycles);
+ if (ret)
+ return ret;
+
+ /*
+ * We don't want the CS line to be toggled between each byte/word
+ * transfer from the NAND. The only way to guarantee that is to have
+ * the NCS_{WR,RD}_{SETUP,HOLD} timings set to 0, which in turn means:
+ *
+ * NCS_RD_PULSE = NRD_CYCLE
+ */
+ ret = atmel_smc_cs_conf_set_pulse(smcconf, ATMEL_SMC_NCS_RD_SHIFT,
+ ncycles);
+ if (ret)
+ return ret;
+
+ /* Txxx timings are directly matching tXXX ones. */
+ ncycles = DIV_ROUND_UP(conf->timings.sdr.tCLR_min, mckperiodps);
+ ret = atmel_smc_cs_conf_set_timing(smcconf,
+ ATMEL_HSMC_TIMINGS_TCLR_SHIFT,
+ ncycles);
+ if (ret)
+ return ret;
+
+ ncycles = DIV_ROUND_UP(conf->timings.sdr.tADL_min, mckperiodps);
+ ret = atmel_smc_cs_conf_set_timing(smcconf,
+ ATMEL_HSMC_TIMINGS_TADL_SHIFT,
+ ncycles);
+ if (ret)
+ return ret;
+
+ ncycles = DIV_ROUND_UP(conf->timings.sdr.tAR_min, mckperiodps);
+ ret = atmel_smc_cs_conf_set_timing(smcconf,
+ ATMEL_HSMC_TIMINGS_TAR_SHIFT,
+ ncycles);
+ if (ret)
+ return ret;
+
+ ncycles = DIV_ROUND_UP(conf->timings.sdr.tRR_min, mckperiodps);
+ ret = atmel_smc_cs_conf_set_timing(smcconf,
+ ATMEL_HSMC_TIMINGS_TRR_SHIFT,
+ ncycles);
+ if (ret)
+ return ret;
+
+ ncycles = DIV_ROUND_UP(conf->timings.sdr.tWB_max, mckperiodps);
+ ret = atmel_smc_cs_conf_set_timing(smcconf,
+ ATMEL_HSMC_TIMINGS_TWB_SHIFT,
+ ncycles);
+ if (ret)
+ return ret;
+
+ /* Attach the CS line to the NFC logic. */
+ smcconf->timings |= ATMEL_HSMC_TIMINGS_NFSEL;
+
+ /* Set the appropriate data bus width. */
+ if (nand->base.options & NAND_BUSWIDTH_16)
+ smcconf->mode |= ATMEL_SMC_MODE_DBW_16;
+
+ /* Operate in NRD/NWE READ/WRITEMODE. */
+ smcconf->mode |= ATMEL_SMC_MODE_READMODE_NRD |
+ ATMEL_SMC_MODE_WRITEMODE_NWE;
+
+ return 0;
+}
+
+static int atmel_smc_nand_setup_data_interface(struct atmel_nand *nand,
+ int csline,
+ const struct nand_data_interface *conf)
+{
+ struct atmel_nand_controller *nc;
+ struct atmel_smc_cs_conf smcconf;
+ struct atmel_nand_cs *cs;
+ int ret;
+
+ nc = to_nand_controller(nand->base.controller);
+
+ ret = atmel_smc_nand_prepare_smcconf(nand, conf, &smcconf);
+ if (ret)
+ return ret;
+
+ if (csline == NAND_DATA_IFACE_CHECK_ONLY)
+ return 0;
+
+ cs = &nand->cs[csline];
+ cs->smcconf = smcconf;
+ atmel_smc_cs_conf_apply(nc->smc, cs->id, &cs->smcconf);
+
+ return 0;
+}
+
+static int atmel_hsmc_nand_setup_data_interface(struct atmel_nand *nand,
+ int csline,
+ const struct nand_data_interface *conf)
+{
+ struct atmel_nand_controller *nc;
+ struct atmel_smc_cs_conf smcconf;
+ struct atmel_nand_cs *cs;
+ int ret;
+
+ nc = to_nand_controller(nand->base.controller);
+
+ ret = atmel_smc_nand_prepare_smcconf(nand, conf, &smcconf);
+ if (ret)
+ return ret;
+
+ if (csline == NAND_DATA_IFACE_CHECK_ONLY)
+ return 0;
+
+ cs = &nand->cs[csline];
+ cs->smcconf = smcconf;
+
+ if (cs->rb.type == ATMEL_NAND_NATIVE_RB)
+ cs->smcconf.timings |= ATMEL_HSMC_TIMINGS_RBNSEL(cs->rb.id);
+
+ atmel_hsmc_cs_conf_apply(nc->smc, cs->id, &cs->smcconf);
+
+ return 0;
+}
+
+static int atmel_nand_setup_data_interface(struct mtd_info *mtd, int csline,
+ const struct nand_data_interface *conf)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct atmel_nand *nand = to_atmel_nand(chip);
+ struct atmel_nand_controller *nc;
+
+ nc = to_nand_controller(nand->base.controller);
+
+ if (csline >= nand->numcs ||
+ (csline < 0 && csline != NAND_DATA_IFACE_CHECK_ONLY))
+ return -EINVAL;
+
+ return nc->caps->ops->setup_data_interface(nand, csline, conf);
+}
+
static void atmel_nand_init(struct atmel_nand_controller *nc,
struct atmel_nand *nand)
{
@@ -1192,6 +1489,9 @@
chip->write_buf = atmel_nand_write_buf;
chip->select_chip = atmel_nand_select_chip;
+ if (nc->mck && nc->caps->ops->setup_data_interface)
+ chip->setup_data_interface = atmel_nand_setup_data_interface;
+
/* Some NANDs require a longer delay than the default one (20us). */
chip->chip_delay = 40;
@@ -1677,6 +1977,12 @@
if (nc->caps->legacy_of_bindings)
return 0;
+ nc->mck = of_clk_get(dev->parent->of_node, 0);
+ if (IS_ERR(nc->mck)) {
+ dev_err(dev, "Failed to retrieve MCK clk\n");
+ return PTR_ERR(nc->mck);
+ }
+
np = of_parse_phandle(dev->parent->of_node, "atmel,smc", 0);
if (!np) {
dev_err(dev, "Missing or invalid atmel,smc property\n");
@@ -1983,6 +2289,7 @@
.remove = atmel_hsmc_nand_controller_remove,
.ecc_init = atmel_hsmc_nand_ecc_init,
.nand_init = atmel_hsmc_nand_init,
+ .setup_data_interface = atmel_hsmc_nand_setup_data_interface,
};
static const struct atmel_nand_controller_caps atmel_sama5_nc_caps = {
@@ -2037,7 +2344,14 @@
return 0;
}
-static const struct atmel_nand_controller_ops atmel_smc_nc_ops = {
+/*
+ * The SMC reg layout of at91rm9200 is completely different which prevents us
+ * from re-using atmel_smc_nand_setup_data_interface() for the
+ * ->setup_data_interface() hook.
+ * At this point, there's no support for the at91rm9200 SMC IP, so we leave
+ * ->setup_data_interface() unassigned.
+ */
+static const struct atmel_nand_controller_ops at91rm9200_nc_ops = {
.probe = atmel_smc_nand_controller_probe,
.remove = atmel_smc_nand_controller_remove,
.ecc_init = atmel_nand_ecc_init,
@@ -2047,6 +2361,20 @@
static const struct atmel_nand_controller_caps atmel_rm9200_nc_caps = {
.ale_offs = BIT(21),
.cle_offs = BIT(22),
+ .ops = &at91rm9200_nc_ops,
+};
+
+static const struct atmel_nand_controller_ops atmel_smc_nc_ops = {
+ .probe = atmel_smc_nand_controller_probe,
+ .remove = atmel_smc_nand_controller_remove,
+ .ecc_init = atmel_nand_ecc_init,
+ .nand_init = atmel_smc_nand_init,
+ .setup_data_interface = atmel_smc_nand_setup_data_interface,
+};
+
+static const struct atmel_nand_controller_caps atmel_sam9260_nc_caps = {
+ .ale_offs = BIT(21),
+ .cle_offs = BIT(22),
.ops = &atmel_smc_nc_ops,
};
@@ -2093,7 +2421,7 @@
},
{
.compatible = "atmel,at91sam9260-nand-controller",
- .data = &atmel_rm9200_nc_caps,
+ .data = &atmel_sam9260_nc_caps,
},
{
.compatible = "atmel,at91sam9261-nand-controller",
@@ -2181,6 +2509,24 @@
return nc->caps->ops->remove(nc);
}
+static __maybe_unused int atmel_nand_controller_resume(struct device *dev)
+{
+ struct atmel_nand_controller *nc = dev_get_drvdata(dev);
+ struct atmel_nand *nand;
+
+ list_for_each_entry(nand, &nc->chips, node) {
+ int i;
+
+ for (i = 0; i < nand->numcs; i++)
+ nand_reset(&nand->base, i);
+ }
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(atmel_nand_controller_pm_ops, NULL,
+ atmel_nand_controller_resume);
+
static struct platform_driver atmel_nand_controller_driver = {
.driver = {
.name = "atmel-nand-controller",
diff --git a/drivers/mtd/nand/bcm47xxnflash/ops_bcm4706.c b/drivers/mtd/nand/bcm47xxnflash/ops_bcm4706.c
index f1da4ea..54bac5b 100644
--- a/drivers/mtd/nand/bcm47xxnflash/ops_bcm4706.c
+++ b/drivers/mtd/nand/bcm47xxnflash/ops_bcm4706.c
@@ -392,6 +392,8 @@
b47n->nand_chip.read_byte = bcm47xxnflash_ops_bcm4706_read_byte;
b47n->nand_chip.read_buf = bcm47xxnflash_ops_bcm4706_read_buf;
b47n->nand_chip.write_buf = bcm47xxnflash_ops_bcm4706_write_buf;
+ b47n->nand_chip.onfi_set_features = nand_onfi_get_set_features_notsupp;
+ b47n->nand_chip.onfi_get_features = nand_onfi_get_set_features_notsupp;
nand_chip->chip_delay = 50;
b47n->nand_chip.bbt_options = NAND_BBT_USE_FLASH;
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index d40c32d..2fd733e 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -654,6 +654,8 @@
cafe->nand.read_buf = cafe_read_buf;
cafe->nand.write_buf = cafe_write_buf;
cafe->nand.select_chip = cafe_select_chip;
+ cafe->nand.onfi_set_features = nand_onfi_get_set_features_notsupp;
+ cafe->nand.onfi_get_features = nand_onfi_get_set_features_notsupp;
cafe->nand.chip_delay = 0;
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 531c519..7b26e53 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -771,11 +771,14 @@
info->chip.ecc.hwctl = nand_davinci_hwctl_4bit;
info->chip.ecc.bytes = 10;
info->chip.ecc.options = NAND_ECC_GENERIC_ERASED_CHECK;
+ info->chip.ecc.algo = NAND_ECC_BCH;
} else {
+ /* 1bit ecc hamming */
info->chip.ecc.calculate = nand_davinci_calculate_1bit;
info->chip.ecc.correct = nand_davinci_correct_1bit;
info->chip.ecc.hwctl = nand_davinci_hwctl_1bit;
info->chip.ecc.bytes = 3;
+ info->chip.ecc.algo = NAND_ECC_HAMMING;
}
info->chip.ecc.size = 512;
info->chip.ecc.strength = pdata->ecc_bits;
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 16634df..d723be3 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -23,50 +23,43 @@
#include <linux/mutex.h>
#include <linux/mtd/mtd.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include "denali.h"
MODULE_LICENSE("GPL");
-/*
- * We define a module parameter that allows the user to override
- * the hardware and decide what timing mode should be used.
- */
-#define NAND_DEFAULT_TIMINGS -1
-
-static int onfi_timing_mode = NAND_DEFAULT_TIMINGS;
-module_param(onfi_timing_mode, int, S_IRUGO);
-MODULE_PARM_DESC(onfi_timing_mode,
- "Overrides default ONFI setting. -1 indicates use default timings");
-
#define DENALI_NAND_NAME "denali-nand"
-/*
- * We define a macro here that combines all interrupts this driver uses into
- * a single constant value, for convenience.
- */
-#define DENALI_IRQ_ALL (INTR__DMA_CMD_COMP | \
- INTR__ECC_TRANSACTION_DONE | \
- INTR__ECC_ERR | \
- INTR__PROGRAM_FAIL | \
- INTR__LOAD_COMP | \
- INTR__PROGRAM_COMP | \
- INTR__TIME_OUT | \
- INTR__ERASE_FAIL | \
- INTR__RST_COMP | \
- INTR__ERASE_COMP)
+/* Host Data/Command Interface */
+#define DENALI_HOST_ADDR 0x00
+#define DENALI_HOST_DATA 0x10
+
+#define DENALI_MAP00 (0 << 26) /* direct access to buffer */
+#define DENALI_MAP01 (1 << 26) /* read/write pages in PIO */
+#define DENALI_MAP10 (2 << 26) /* high-level control plane */
+#define DENALI_MAP11 (3 << 26) /* direct controller access */
+
+/* MAP11 access cycle type */
+#define DENALI_MAP11_CMD ((DENALI_MAP11) | 0) /* command cycle */
+#define DENALI_MAP11_ADDR ((DENALI_MAP11) | 1) /* address cycle */
+#define DENALI_MAP11_DATA ((DENALI_MAP11) | 2) /* data cycle */
+
+/* MAP10 commands */
+#define DENALI_ERASE 0x01
+
+#define DENALI_BANK(denali) ((denali)->active_bank << 24)
+
+#define DENALI_INVALID_BANK -1
+#define DENALI_NR_BANKS 4
/*
- * indicates whether or not the internal value for the flash bank is
- * valid or not
+ * The bus interface clock, clk_x, is phase aligned with the core clock. The
+ * clk_x is an integral multiple N of the core clk. The value N is configured
+ * at IP delivery time, and its available value is 4, 5, or 6. We need to align
+ * to the largest value to make it work with any possible configuration.
*/
-#define CHIP_SELECT_INVALID -1
-
-/*
- * This macro divides two integers and rounds fractional values up
- * to the nearest integer value.
- */
-#define CEIL_DIV(X, Y) (((X)%(Y)) ? ((X)/(Y)+1) : ((X)/(Y)))
+#define DENALI_CLK_X_MULT 6
/*
* this macro allows us to convert from an MTD structure to our own
@@ -77,339 +70,11 @@
return container_of(mtd_to_nand(mtd), struct denali_nand_info, nand);
}
-/*
- * These constants are defined by the driver to enable common driver
- * configuration options.
- */
-#define SPARE_ACCESS 0x41
-#define MAIN_ACCESS 0x42
-#define MAIN_SPARE_ACCESS 0x43
-
-#define DENALI_READ 0
-#define DENALI_WRITE 0x100
-
-/*
- * this is a helper macro that allows us to
- * format the bank into the proper bits for the controller
- */
-#define BANK(x) ((x) << 24)
-
-/* forward declarations */
-static void clear_interrupts(struct denali_nand_info *denali);
-static uint32_t wait_for_irq(struct denali_nand_info *denali,
- uint32_t irq_mask);
-static void denali_irq_enable(struct denali_nand_info *denali,
- uint32_t int_mask);
-static uint32_t read_interrupt_status(struct denali_nand_info *denali);
-
-/*
- * Certain operations for the denali NAND controller use an indexed mode to
- * read/write data. The operation is performed by writing the address value
- * of the command to the device memory followed by the data. This function
- * abstracts this common operation.
- */
-static void index_addr(struct denali_nand_info *denali,
- uint32_t address, uint32_t data)
+static void denali_host_write(struct denali_nand_info *denali,
+ uint32_t addr, uint32_t data)
{
- iowrite32(address, denali->flash_mem);
- iowrite32(data, denali->flash_mem + 0x10);
-}
-
-/* Perform an indexed read of the device */
-static void index_addr_read_data(struct denali_nand_info *denali,
- uint32_t address, uint32_t *pdata)
-{
- iowrite32(address, denali->flash_mem);
- *pdata = ioread32(denali->flash_mem + 0x10);
-}
-
-/*
- * We need to buffer some data for some of the NAND core routines.
- * The operations manage buffering that data.
- */
-static void reset_buf(struct denali_nand_info *denali)
-{
- denali->buf.head = denali->buf.tail = 0;
-}
-
-static void write_byte_to_buf(struct denali_nand_info *denali, uint8_t byte)
-{
- denali->buf.buf[denali->buf.tail++] = byte;
-}
-
-/* reads the status of the device */
-static void read_status(struct denali_nand_info *denali)
-{
- uint32_t cmd;
-
- /* initialize the data buffer to store status */
- reset_buf(denali);
-
- cmd = ioread32(denali->flash_reg + WRITE_PROTECT);
- if (cmd)
- write_byte_to_buf(denali, NAND_STATUS_WP);
- else
- write_byte_to_buf(denali, 0);
-}
-
-/* resets a specific device connected to the core */
-static void reset_bank(struct denali_nand_info *denali)
-{
- uint32_t irq_status;
- uint32_t irq_mask = INTR__RST_COMP | INTR__TIME_OUT;
-
- clear_interrupts(denali);
-
- iowrite32(1 << denali->flash_bank, denali->flash_reg + DEVICE_RESET);
-
- irq_status = wait_for_irq(denali, irq_mask);
-
- if (irq_status & INTR__TIME_OUT)
- dev_err(denali->dev, "reset bank failed.\n");
-}
-
-/* Reset the flash controller */
-static uint16_t denali_nand_reset(struct denali_nand_info *denali)
-{
- int i;
-
- for (i = 0; i < denali->max_banks; i++)
- iowrite32(INTR__RST_COMP | INTR__TIME_OUT,
- denali->flash_reg + INTR_STATUS(i));
-
- for (i = 0; i < denali->max_banks; i++) {
- iowrite32(1 << i, denali->flash_reg + DEVICE_RESET);
- while (!(ioread32(denali->flash_reg + INTR_STATUS(i)) &
- (INTR__RST_COMP | INTR__TIME_OUT)))
- cpu_relax();
- if (ioread32(denali->flash_reg + INTR_STATUS(i)) &
- INTR__TIME_OUT)
- dev_dbg(denali->dev,
- "NAND Reset operation timed out on bank %d\n", i);
- }
-
- for (i = 0; i < denali->max_banks; i++)
- iowrite32(INTR__RST_COMP | INTR__TIME_OUT,
- denali->flash_reg + INTR_STATUS(i));
-
- return PASS;
-}
-
-/*
- * this routine calculates the ONFI timing values for a given mode and
- * programs the clocking register accordingly. The mode is determined by
- * the get_onfi_nand_para routine.
- */
-static void nand_onfi_timing_set(struct denali_nand_info *denali,
- uint16_t mode)
-{
- uint16_t Trea[6] = {40, 30, 25, 20, 20, 16};
- uint16_t Trp[6] = {50, 25, 17, 15, 12, 10};
- uint16_t Treh[6] = {30, 15, 15, 10, 10, 7};
- uint16_t Trc[6] = {100, 50, 35, 30, 25, 20};
- uint16_t Trhoh[6] = {0, 15, 15, 15, 15, 15};
- uint16_t Trloh[6] = {0, 0, 0, 0, 5, 5};
- uint16_t Tcea[6] = {100, 45, 30, 25, 25, 25};
- uint16_t Tadl[6] = {200, 100, 100, 100, 70, 70};
- uint16_t Trhw[6] = {200, 100, 100, 100, 100, 100};
- uint16_t Trhz[6] = {200, 100, 100, 100, 100, 100};
- uint16_t Twhr[6] = {120, 80, 80, 60, 60, 60};
- uint16_t Tcs[6] = {70, 35, 25, 25, 20, 15};
-
- uint16_t data_invalid_rhoh, data_invalid_rloh, data_invalid;
- uint16_t dv_window = 0;
- uint16_t en_lo, en_hi;
- uint16_t acc_clks;
- uint16_t addr_2_data, re_2_we, re_2_re, we_2_re, cs_cnt;
-
- en_lo = CEIL_DIV(Trp[mode], CLK_X);
- en_hi = CEIL_DIV(Treh[mode], CLK_X);
-#if ONFI_BLOOM_TIME
- if ((en_hi * CLK_X) < (Treh[mode] + 2))
- en_hi++;
-#endif
-
- if ((en_lo + en_hi) * CLK_X < Trc[mode])
- en_lo += CEIL_DIV((Trc[mode] - (en_lo + en_hi) * CLK_X), CLK_X);
-
- if ((en_lo + en_hi) < CLK_MULTI)
- en_lo += CLK_MULTI - en_lo - en_hi;
-
- while (dv_window < 8) {
- data_invalid_rhoh = en_lo * CLK_X + Trhoh[mode];
-
- data_invalid_rloh = (en_lo + en_hi) * CLK_X + Trloh[mode];
-
- data_invalid = data_invalid_rhoh < data_invalid_rloh ?
- data_invalid_rhoh : data_invalid_rloh;
-
- dv_window = data_invalid - Trea[mode];
-
- if (dv_window < 8)
- en_lo++;
- }
-
- acc_clks = CEIL_DIV(Trea[mode], CLK_X);
-
- while (acc_clks * CLK_X - Trea[mode] < 3)
- acc_clks++;
-
- if (data_invalid - acc_clks * CLK_X < 2)
- dev_warn(denali->dev, "%s, Line %d: Warning!\n",
- __FILE__, __LINE__);
-
- addr_2_data = CEIL_DIV(Tadl[mode], CLK_X);
- re_2_we = CEIL_DIV(Trhw[mode], CLK_X);
- re_2_re = CEIL_DIV(Trhz[mode], CLK_X);
- we_2_re = CEIL_DIV(Twhr[mode], CLK_X);
- cs_cnt = CEIL_DIV((Tcs[mode] - Trp[mode]), CLK_X);
- if (cs_cnt == 0)
- cs_cnt = 1;
-
- if (Tcea[mode]) {
- while (cs_cnt * CLK_X + Trea[mode] < Tcea[mode])
- cs_cnt++;
- }
-
-#if MODE5_WORKAROUND
- if (mode == 5)
- acc_clks = 5;
-#endif
-
- /* Sighting 3462430: Temporary hack for MT29F128G08CJABAWP:B */
- if (ioread32(denali->flash_reg + MANUFACTURER_ID) == 0 &&
- ioread32(denali->flash_reg + DEVICE_ID) == 0x88)
- acc_clks = 6;
-
- iowrite32(acc_clks, denali->flash_reg + ACC_CLKS);
- iowrite32(re_2_we, denali->flash_reg + RE_2_WE);
- iowrite32(re_2_re, denali->flash_reg + RE_2_RE);
- iowrite32(we_2_re, denali->flash_reg + WE_2_RE);
- iowrite32(addr_2_data, denali->flash_reg + ADDR_2_DATA);
- iowrite32(en_lo, denali->flash_reg + RDWR_EN_LO_CNT);
- iowrite32(en_hi, denali->flash_reg + RDWR_EN_HI_CNT);
- iowrite32(cs_cnt, denali->flash_reg + CS_SETUP_CNT);
-}
-
-/* queries the NAND device to see what ONFI modes it supports. */
-static uint16_t get_onfi_nand_para(struct denali_nand_info *denali)
-{
- int i;
-
- /*
- * we needn't to do a reset here because driver has already
- * reset all the banks before
- */
- if (!(ioread32(denali->flash_reg + ONFI_TIMING_MODE) &
- ONFI_TIMING_MODE__VALUE))
- return FAIL;
-
- for (i = 5; i > 0; i--) {
- if (ioread32(denali->flash_reg + ONFI_TIMING_MODE) &
- (0x01 << i))
- break;
- }
-
- nand_onfi_timing_set(denali, i);
-
- /*
- * By now, all the ONFI devices we know support the page cache
- * rw feature. So here we enable the pipeline_rw_ahead feature
- */
- /* iowrite32(1, denali->flash_reg + CACHE_WRITE_ENABLE); */
- /* iowrite32(1, denali->flash_reg + CACHE_READ_ENABLE); */
-
- return PASS;
-}
-
-static void get_samsung_nand_para(struct denali_nand_info *denali,
- uint8_t device_id)
-{
- if (device_id == 0xd3) { /* Samsung K9WAG08U1A */
- /* Set timing register values according to datasheet */
- iowrite32(5, denali->flash_reg + ACC_CLKS);
- iowrite32(20, denali->flash_reg + RE_2_WE);
- iowrite32(12, denali->flash_reg + WE_2_RE);
- iowrite32(14, denali->flash_reg + ADDR_2_DATA);
- iowrite32(3, denali->flash_reg + RDWR_EN_LO_CNT);
- iowrite32(2, denali->flash_reg + RDWR_EN_HI_CNT);
- iowrite32(2, denali->flash_reg + CS_SETUP_CNT);
- }
-}
-
-static void get_toshiba_nand_para(struct denali_nand_info *denali)
-{
- /*
- * Workaround to fix a controller bug which reports a wrong
- * spare area size for some kind of Toshiba NAND device
- */
- if ((ioread32(denali->flash_reg + DEVICE_MAIN_AREA_SIZE) == 4096) &&
- (ioread32(denali->flash_reg + DEVICE_SPARE_AREA_SIZE) == 64))
- iowrite32(216, denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
-}
-
-static void get_hynix_nand_para(struct denali_nand_info *denali,
- uint8_t device_id)
-{
- switch (device_id) {
- case 0xD5: /* Hynix H27UAG8T2A, H27UBG8U5A or H27UCG8VFA */
- case 0xD7: /* Hynix H27UDG8VEM, H27UCG8UDM or H27UCG8V5A */
- iowrite32(128, denali->flash_reg + PAGES_PER_BLOCK);
- iowrite32(4096, denali->flash_reg + DEVICE_MAIN_AREA_SIZE);
- iowrite32(224, denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
- iowrite32(0, denali->flash_reg + DEVICE_WIDTH);
- break;
- default:
- dev_warn(denali->dev,
- "Unknown Hynix NAND (Device ID: 0x%x).\n"
- "Will use default parameter values instead.\n",
- device_id);
- }
-}
-
-/*
- * determines how many NAND chips are connected to the controller. Note for
- * Intel CE4100 devices we don't support more than one device.
- */
-static void find_valid_banks(struct denali_nand_info *denali)
-{
- uint32_t id[denali->max_banks];
- int i;
-
- denali->total_used_banks = 1;
- for (i = 0; i < denali->max_banks; i++) {
- index_addr(denali, MODE_11 | (i << 24) | 0, 0x90);
- index_addr(denali, MODE_11 | (i << 24) | 1, 0);
- index_addr_read_data(denali, MODE_11 | (i << 24) | 2, &id[i]);
-
- dev_dbg(denali->dev,
- "Return 1st ID for bank[%d]: %x\n", i, id[i]);
-
- if (i == 0) {
- if (!(id[i] & 0x0ff))
- break; /* WTF? */
- } else {
- if ((id[i] & 0x0ff) == (id[0] & 0x0ff))
- denali->total_used_banks++;
- else
- break;
- }
- }
-
- if (denali->platform == INTEL_CE4100) {
- /*
- * Platform limitations of the CE4100 device limit
- * users to a single chip solution for NAND.
- * Multichip support is not enabled.
- */
- if (denali->total_used_banks != 1) {
- dev_err(denali->dev,
- "Sorry, Intel CE4100 only supports a single NAND device.\n");
- BUG();
- }
- }
- dev_dbg(denali->dev,
- "denali->total_used_banks: %d\n", denali->total_used_banks);
+ iowrite32(addr, denali->host + DENALI_HOST_ADDR);
+ iowrite32(data, denali->host + DENALI_HOST_DATA);
}
/*
@@ -418,7 +83,7 @@
*/
static void detect_max_banks(struct denali_nand_info *denali)
{
- uint32_t features = ioread32(denali->flash_reg + FEATURES);
+ uint32_t features = ioread32(denali->reg + FEATURES);
denali->max_banks = 1 << (features & FEATURES__N_BANKS);
@@ -427,227 +92,120 @@
denali->max_banks <<= 1;
}
-static uint16_t denali_nand_timing_set(struct denali_nand_info *denali)
-{
- uint16_t status = PASS;
- uint32_t id_bytes[8], addr;
- uint8_t maf_id, device_id;
- int i;
-
- /*
- * Use read id method to get device ID and other params.
- * For some NAND chips, controller can't report the correct
- * device ID by reading from DEVICE_ID register
- */
- addr = MODE_11 | BANK(denali->flash_bank);
- index_addr(denali, addr | 0, 0x90);
- index_addr(denali, addr | 1, 0);
- for (i = 0; i < 8; i++)
- index_addr_read_data(denali, addr | 2, &id_bytes[i]);
- maf_id = id_bytes[0];
- device_id = id_bytes[1];
-
- if (ioread32(denali->flash_reg + ONFI_DEVICE_NO_OF_LUNS) &
- ONFI_DEVICE_NO_OF_LUNS__ONFI_DEVICE) { /* ONFI 1.0 NAND */
- if (FAIL == get_onfi_nand_para(denali))
- return FAIL;
- } else if (maf_id == 0xEC) { /* Samsung NAND */
- get_samsung_nand_para(denali, device_id);
- } else if (maf_id == 0x98) { /* Toshiba NAND */
- get_toshiba_nand_para(denali);
- } else if (maf_id == 0xAD) { /* Hynix NAND */
- get_hynix_nand_para(denali, device_id);
- }
-
- dev_info(denali->dev,
- "Dump timing register values:\n"
- "acc_clks: %d, re_2_we: %d, re_2_re: %d\n"
- "we_2_re: %d, addr_2_data: %d, rdwr_en_lo_cnt: %d\n"
- "rdwr_en_hi_cnt: %d, cs_setup_cnt: %d\n",
- ioread32(denali->flash_reg + ACC_CLKS),
- ioread32(denali->flash_reg + RE_2_WE),
- ioread32(denali->flash_reg + RE_2_RE),
- ioread32(denali->flash_reg + WE_2_RE),
- ioread32(denali->flash_reg + ADDR_2_DATA),
- ioread32(denali->flash_reg + RDWR_EN_LO_CNT),
- ioread32(denali->flash_reg + RDWR_EN_HI_CNT),
- ioread32(denali->flash_reg + CS_SETUP_CNT));
-
- find_valid_banks(denali);
-
- /*
- * If the user specified to override the default timings
- * with a specific ONFI mode, we apply those changes here.
- */
- if (onfi_timing_mode != NAND_DEFAULT_TIMINGS)
- nand_onfi_timing_set(denali, onfi_timing_mode);
-
- return status;
-}
-
-static void denali_set_intr_modes(struct denali_nand_info *denali,
- uint16_t INT_ENABLE)
-{
- if (INT_ENABLE)
- iowrite32(1, denali->flash_reg + GLOBAL_INT_ENABLE);
- else
- iowrite32(0, denali->flash_reg + GLOBAL_INT_ENABLE);
-}
-
-/*
- * validation function to verify that the controlling software is making
- * a valid request
- */
-static inline bool is_flash_bank_valid(int flash_bank)
-{
- return flash_bank >= 0 && flash_bank < 4;
-}
-
-static void denali_irq_init(struct denali_nand_info *denali)
-{
- uint32_t int_mask;
- int i;
-
- /* Disable global interrupts */
- denali_set_intr_modes(denali, false);
-
- int_mask = DENALI_IRQ_ALL;
-
- /* Clear all status bits */
- for (i = 0; i < denali->max_banks; ++i)
- iowrite32(0xFFFF, denali->flash_reg + INTR_STATUS(i));
-
- denali_irq_enable(denali, int_mask);
-}
-
-static void denali_irq_cleanup(int irqnum, struct denali_nand_info *denali)
-{
- denali_set_intr_modes(denali, false);
-}
-
-static void denali_irq_enable(struct denali_nand_info *denali,
- uint32_t int_mask)
+static void denali_enable_irq(struct denali_nand_info *denali)
{
int i;
- for (i = 0; i < denali->max_banks; ++i)
- iowrite32(int_mask, denali->flash_reg + INTR_EN(i));
+ for (i = 0; i < DENALI_NR_BANKS; i++)
+ iowrite32(U32_MAX, denali->reg + INTR_EN(i));
+ iowrite32(GLOBAL_INT_EN_FLAG, denali->reg + GLOBAL_INT_ENABLE);
}
-/*
- * This function only returns when an interrupt that this driver cares about
- * occurs. This is to reduce the overhead of servicing interrupts
- */
-static inline uint32_t denali_irq_detected(struct denali_nand_info *denali)
+static void denali_disable_irq(struct denali_nand_info *denali)
{
- return read_interrupt_status(denali) & DENALI_IRQ_ALL;
+ int i;
+
+ for (i = 0; i < DENALI_NR_BANKS; i++)
+ iowrite32(0, denali->reg + INTR_EN(i));
+ iowrite32(0, denali->reg + GLOBAL_INT_ENABLE);
}
-/* Interrupts are cleared by writing a 1 to the appropriate status bit */
-static inline void clear_interrupt(struct denali_nand_info *denali,
- uint32_t irq_mask)
+static void denali_clear_irq(struct denali_nand_info *denali,
+ int bank, uint32_t irq_status)
{
- uint32_t intr_status_reg;
-
- intr_status_reg = INTR_STATUS(denali->flash_bank);
-
- iowrite32(irq_mask, denali->flash_reg + intr_status_reg);
+ /* write one to clear bits */
+ iowrite32(irq_status, denali->reg + INTR_STATUS(bank));
}
-static void clear_interrupts(struct denali_nand_info *denali)
+static void denali_clear_irq_all(struct denali_nand_info *denali)
{
- uint32_t status;
+ int i;
- spin_lock_irq(&denali->irq_lock);
-
- status = read_interrupt_status(denali);
- clear_interrupt(denali, status);
-
- denali->irq_status = 0x0;
- spin_unlock_irq(&denali->irq_lock);
+ for (i = 0; i < DENALI_NR_BANKS; i++)
+ denali_clear_irq(denali, i, U32_MAX);
}
-static uint32_t read_interrupt_status(struct denali_nand_info *denali)
-{
- uint32_t intr_status_reg;
-
- intr_status_reg = INTR_STATUS(denali->flash_bank);
-
- return ioread32(denali->flash_reg + intr_status_reg);
-}
-
-/*
- * This is the interrupt service routine. It handles all interrupts
- * sent to this device. Note that on CE4100, this is a shared interrupt.
- */
static irqreturn_t denali_isr(int irq, void *dev_id)
{
struct denali_nand_info *denali = dev_id;
+ irqreturn_t ret = IRQ_NONE;
uint32_t irq_status;
- irqreturn_t result = IRQ_NONE;
+ int i;
spin_lock(&denali->irq_lock);
- /* check to see if a valid NAND chip has been selected. */
- if (is_flash_bank_valid(denali->flash_bank)) {
- /*
- * check to see if controller generated the interrupt,
- * since this is a shared interrupt
- */
- irq_status = denali_irq_detected(denali);
- if (irq_status != 0) {
- /* handle interrupt */
- /* first acknowledge it */
- clear_interrupt(denali, irq_status);
- /*
- * store the status in the device context for someone
- * to read
- */
- denali->irq_status |= irq_status;
- /* notify anyone who cares that it happened */
+ for (i = 0; i < DENALI_NR_BANKS; i++) {
+ irq_status = ioread32(denali->reg + INTR_STATUS(i));
+ if (irq_status)
+ ret = IRQ_HANDLED;
+
+ denali_clear_irq(denali, i, irq_status);
+
+ if (i != denali->active_bank)
+ continue;
+
+ denali->irq_status |= irq_status;
+
+ if (denali->irq_status & denali->irq_mask)
complete(&denali->complete);
- /* tell the OS that we've handled this */
- result = IRQ_HANDLED;
- }
}
+
spin_unlock(&denali->irq_lock);
- return result;
+
+ return ret;
}
-static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask)
+static void denali_reset_irq(struct denali_nand_info *denali)
{
- unsigned long comp_res;
- uint32_t intr_status;
- unsigned long timeout = msecs_to_jiffies(1000);
+ unsigned long flags;
- do {
- comp_res =
- wait_for_completion_timeout(&denali->complete, timeout);
- spin_lock_irq(&denali->irq_lock);
- intr_status = denali->irq_status;
+ spin_lock_irqsave(&denali->irq_lock, flags);
+ denali->irq_status = 0;
+ denali->irq_mask = 0;
+ spin_unlock_irqrestore(&denali->irq_lock, flags);
+}
- if (intr_status & irq_mask) {
- denali->irq_status &= ~irq_mask;
- spin_unlock_irq(&denali->irq_lock);
- /* our interrupt was detected */
- break;
- }
+static uint32_t denali_wait_for_irq(struct denali_nand_info *denali,
+ uint32_t irq_mask)
+{
+ unsigned long time_left, flags;
+ uint32_t irq_status;
- /*
- * these are not the interrupts you are looking for -
- * need to wait again
- */
- spin_unlock_irq(&denali->irq_lock);
- } while (comp_res != 0);
+ spin_lock_irqsave(&denali->irq_lock, flags);
- if (comp_res == 0) {
- /* timeout */
- pr_err("timeout occurred, status = 0x%x, mask = 0x%x\n",
- intr_status, irq_mask);
+ irq_status = denali->irq_status;
- intr_status = 0;
+ if (irq_mask & irq_status) {
+ /* return immediately if the IRQ has already happened. */
+ spin_unlock_irqrestore(&denali->irq_lock, flags);
+ return irq_status;
}
- return intr_status;
+
+ denali->irq_mask = irq_mask;
+ reinit_completion(&denali->complete);
+ spin_unlock_irqrestore(&denali->irq_lock, flags);
+
+ time_left = wait_for_completion_timeout(&denali->complete,
+ msecs_to_jiffies(1000));
+ if (!time_left) {
+ dev_err(denali->dev, "timeout while waiting for irq 0x%x\n",
+ denali->irq_mask);
+ return 0;
+ }
+
+ return denali->irq_status;
+}
+
+static uint32_t denali_check_irq(struct denali_nand_info *denali)
+{
+ unsigned long flags;
+ uint32_t irq_status;
+
+ spin_lock_irqsave(&denali->irq_lock, flags);
+ irq_status = denali->irq_status;
+ spin_unlock_irqrestore(&denali->irq_lock, flags);
+
+ return irq_status;
}
/*
@@ -664,153 +222,111 @@
transfer_spare_flag = transfer_spare ? TRANSFER_SPARE_REG__FLAG : 0;
/* Enable spare area/ECC per user's request. */
- iowrite32(ecc_en_flag, denali->flash_reg + ECC_ENABLE);
- iowrite32(transfer_spare_flag, denali->flash_reg + TRANSFER_SPARE_REG);
+ iowrite32(ecc_en_flag, denali->reg + ECC_ENABLE);
+ iowrite32(transfer_spare_flag, denali->reg + TRANSFER_SPARE_REG);
}
-/*
- * sends a pipeline command operation to the controller. See the Denali NAND
- * controller's user guide for more information (section 4.2.3.6).
- */
-static int denali_send_pipeline_cmd(struct denali_nand_info *denali,
- bool ecc_en, bool transfer_spare,
- int access_type, int op)
-{
- int status = PASS;
- uint32_t addr, cmd;
-
- setup_ecc_for_xfer(denali, ecc_en, transfer_spare);
-
- clear_interrupts(denali);
-
- addr = BANK(denali->flash_bank) | denali->page;
-
- if (op == DENALI_WRITE && access_type != SPARE_ACCESS) {
- cmd = MODE_01 | addr;
- iowrite32(cmd, denali->flash_mem);
- } else if (op == DENALI_WRITE && access_type == SPARE_ACCESS) {
- /* read spare area */
- cmd = MODE_10 | addr;
- index_addr(denali, cmd, access_type);
-
- cmd = MODE_01 | addr;
- iowrite32(cmd, denali->flash_mem);
- } else if (op == DENALI_READ) {
- /* setup page read request for access type */
- cmd = MODE_10 | addr;
- index_addr(denali, cmd, access_type);
-
- cmd = MODE_01 | addr;
- iowrite32(cmd, denali->flash_mem);
- }
- return status;
-}
-
-/* helper function that simply writes a buffer to the flash */
-static int write_data_to_flash_mem(struct denali_nand_info *denali,
- const uint8_t *buf, int len)
-{
- uint32_t *buf32;
- int i;
-
- /*
- * verify that the len is a multiple of 4.
- * see comment in read_data_from_flash_mem()
- */
- BUG_ON((len % 4) != 0);
-
- /* write the data to the flash memory */
- buf32 = (uint32_t *)buf;
- for (i = 0; i < len / 4; i++)
- iowrite32(*buf32++, denali->flash_mem + 0x10);
- return i * 4; /* intent is to return the number of bytes read */
-}
-
-/* helper function that simply reads a buffer from the flash */
-static int read_data_from_flash_mem(struct denali_nand_info *denali,
- uint8_t *buf, int len)
-{
- uint32_t *buf32;
- int i;
-
- /*
- * we assume that len will be a multiple of 4, if not it would be nice
- * to know about it ASAP rather than have random failures...
- * This assumption is based on the fact that this function is designed
- * to be used to read flash pages, which are typically multiples of 4.
- */
- BUG_ON((len % 4) != 0);
-
- /* transfer the data from the flash */
- buf32 = (uint32_t *)buf;
- for (i = 0; i < len / 4; i++)
- *buf32++ = ioread32(denali->flash_mem + 0x10);
- return i * 4; /* intent is to return the number of bytes read */
-}
-
-/* writes OOB data to the device */
-static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
+static void denali_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
- uint32_t irq_status;
- uint32_t irq_mask = INTR__PROGRAM_COMP | INTR__PROGRAM_FAIL;
- int status = 0;
+ int i;
- denali->page = page;
+ iowrite32(DENALI_MAP11_DATA | DENALI_BANK(denali),
+ denali->host + DENALI_HOST_ADDR);
- if (denali_send_pipeline_cmd(denali, false, false, SPARE_ACCESS,
- DENALI_WRITE) == PASS) {
- write_data_to_flash_mem(denali, buf, mtd->oobsize);
-
- /* wait for operation to complete */
- irq_status = wait_for_irq(denali, irq_mask);
-
- if (irq_status == 0) {
- dev_err(denali->dev, "OOB write failed\n");
- status = -EIO;
- }
- } else {
- dev_err(denali->dev, "unable to send pipeline command\n");
- status = -EIO;
- }
- return status;
+ for (i = 0; i < len; i++)
+ buf[i] = ioread32(denali->host + DENALI_HOST_DATA);
}
-/* reads OOB data from the device */
-static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
+static void denali_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
- uint32_t irq_mask = INTR__LOAD_COMP;
- uint32_t irq_status, addr, cmd;
+ int i;
- denali->page = page;
+ iowrite32(DENALI_MAP11_DATA | DENALI_BANK(denali),
+ denali->host + DENALI_HOST_ADDR);
- if (denali_send_pipeline_cmd(denali, false, true, SPARE_ACCESS,
- DENALI_READ) == PASS) {
- read_data_from_flash_mem(denali, buf, mtd->oobsize);
+ for (i = 0; i < len; i++)
+ iowrite32(buf[i], denali->host + DENALI_HOST_DATA);
+}
- /*
- * wait for command to be accepted
- * can always use status0 bit as the
- * mask is identical for each bank.
- */
- irq_status = wait_for_irq(denali, irq_mask);
+static void denali_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ uint16_t *buf16 = (uint16_t *)buf;
+ int i;
- if (irq_status == 0)
- dev_err(denali->dev, "page on OOB timeout %d\n",
- denali->page);
+ iowrite32(DENALI_MAP11_DATA | DENALI_BANK(denali),
+ denali->host + DENALI_HOST_ADDR);
- /*
- * We set the device back to MAIN_ACCESS here as I observed
- * instability with the controller if you do a block erase
- * and the last transaction was a SPARE_ACCESS. Block erase
- * is reliable (according to the MTD test infrastructure)
- * if you are in MAIN_ACCESS.
- */
- addr = BANK(denali->flash_bank) | denali->page;
- cmd = MODE_10 | addr;
- index_addr(denali, cmd, MAIN_ACCESS);
- }
+ for (i = 0; i < len / 2; i++)
+ buf16[i] = ioread32(denali->host + DENALI_HOST_DATA);
+}
+
+static void denali_write_buf16(struct mtd_info *mtd, const uint8_t *buf,
+ int len)
+{
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ const uint16_t *buf16 = (const uint16_t *)buf;
+ int i;
+
+ iowrite32(DENALI_MAP11_DATA | DENALI_BANK(denali),
+ denali->host + DENALI_HOST_ADDR);
+
+ for (i = 0; i < len / 2; i++)
+ iowrite32(buf16[i], denali->host + DENALI_HOST_DATA);
+}
+
+static uint8_t denali_read_byte(struct mtd_info *mtd)
+{
+ uint8_t byte;
+
+ denali_read_buf(mtd, &byte, 1);
+
+ return byte;
+}
+
+static void denali_write_byte(struct mtd_info *mtd, uint8_t byte)
+{
+ denali_write_buf(mtd, &byte, 1);
+}
+
+static uint16_t denali_read_word(struct mtd_info *mtd)
+{
+ uint16_t word;
+
+ denali_read_buf16(mtd, (uint8_t *)&word, 2);
+
+ return word;
+}
+
+static void denali_cmd_ctrl(struct mtd_info *mtd, int dat, unsigned int ctrl)
+{
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ uint32_t type;
+
+ if (ctrl & NAND_CLE)
+ type = DENALI_MAP11_CMD;
+ else if (ctrl & NAND_ALE)
+ type = DENALI_MAP11_ADDR;
+ else
+ return;
+
+ /*
+ * Some commands are followed by chip->dev_ready or chip->waitfunc.
+ * irq_status must be cleared here to catch the R/B# interrupt later.
+ */
+ if (ctrl & NAND_CTRL_CHANGE)
+ denali_reset_irq(denali);
+
+ denali_host_write(denali, DENALI_BANK(denali) | type, dat);
+}
+
+static int denali_dev_ready(struct mtd_info *mtd)
+{
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+
+ return !!(denali_check_irq(denali) & INTR__INT_ACT);
}
static int denali_check_erased_page(struct mtd_info *mtd,
@@ -856,11 +372,11 @@
unsigned long *uncor_ecc_flags)
{
struct nand_chip *chip = mtd_to_nand(mtd);
- int bank = denali->flash_bank;
+ int bank = denali->active_bank;
uint32_t ecc_cor;
unsigned int max_bitflips;
- ecc_cor = ioread32(denali->flash_reg + ECC_COR_INFO(bank));
+ ecc_cor = ioread32(denali->reg + ECC_COR_INFO(bank));
ecc_cor >>= ECC_COR_INFO__SHIFT(bank);
if (ecc_cor & ECC_COR_INFO__UNCOR_ERR) {
@@ -886,8 +402,6 @@
return max_bitflips;
}
-#define ECC_SECTOR_SIZE 512
-
#define ECC_SECTOR(x) (((x) & ECC_ERROR_ADDRESS__SECTOR_NR) >> 12)
#define ECC_BYTE(x) (((x) & ECC_ERROR_ADDRESS__OFFSET))
#define ECC_CORRECTION_VALUE(x) ((x) & ERR_CORRECTION_INFO__BYTEMASK)
@@ -899,22 +413,23 @@
struct denali_nand_info *denali,
unsigned long *uncor_ecc_flags, uint8_t *buf)
{
+ unsigned int ecc_size = denali->nand.ecc.size;
unsigned int bitflips = 0;
unsigned int max_bitflips = 0;
uint32_t err_addr, err_cor_info;
unsigned int err_byte, err_sector, err_device;
uint8_t err_cor_value;
unsigned int prev_sector = 0;
+ uint32_t irq_status;
- /* read the ECC errors. we'll ignore them for now */
- denali_set_intr_modes(denali, false);
+ denali_reset_irq(denali);
do {
- err_addr = ioread32(denali->flash_reg + ECC_ERROR_ADDRESS);
+ err_addr = ioread32(denali->reg + ECC_ERROR_ADDRESS);
err_sector = ECC_SECTOR(err_addr);
err_byte = ECC_BYTE(err_addr);
- err_cor_info = ioread32(denali->flash_reg + ERR_CORRECTION_INFO);
+ err_cor_info = ioread32(denali->reg + ERR_CORRECTION_INFO);
err_cor_value = ECC_CORRECTION_VALUE(err_cor_info);
err_device = ECC_ERR_DEVICE(err_cor_info);
@@ -928,9 +443,9 @@
* an erased sector.
*/
*uncor_ecc_flags |= BIT(err_sector);
- } else if (err_byte < ECC_SECTOR_SIZE) {
+ } else if (err_byte < ecc_size) {
/*
- * If err_byte is larger than ECC_SECTOR_SIZE, means error
+ * If err_byte is larger than ecc_size, means error
* happened in OOB, so we ignore it. It's no need for
* us to correct it err_device is represented the NAND
* error bits are happened in if there are more than
@@ -939,8 +454,8 @@
int offset;
unsigned int flips_in_byte;
- offset = (err_sector * ECC_SECTOR_SIZE + err_byte) *
- denali->devnum + err_device;
+ offset = (err_sector * ecc_size + err_byte) *
+ denali->devs_per_cs + err_device;
/* correct the ECC error */
flips_in_byte = hweight8(buf[offset] ^ err_cor_value);
@@ -959,10 +474,9 @@
* ECC_TRANSACTION_DONE interrupt, so here just wait for
* a while for this interrupt
*/
- while (!(read_interrupt_status(denali) & INTR__ECC_TRANSACTION_DONE))
- cpu_relax();
- clear_interrupts(denali);
- denali_set_intr_modes(denali, true);
+ irq_status = denali_wait_for_irq(denali, INTR__ECC_TRANSACTION_DONE);
+ if (!(irq_status & INTR__ECC_TRANSACTION_DONE))
+ return -EIO;
return max_bitflips;
}
@@ -970,17 +484,17 @@
/* programs the controller to either enable/disable DMA transfers */
static void denali_enable_dma(struct denali_nand_info *denali, bool en)
{
- iowrite32(en ? DMA_ENABLE__FLAG : 0, denali->flash_reg + DMA_ENABLE);
- ioread32(denali->flash_reg + DMA_ENABLE);
+ iowrite32(en ? DMA_ENABLE__FLAG : 0, denali->reg + DMA_ENABLE);
+ ioread32(denali->reg + DMA_ENABLE);
}
-static void denali_setup_dma64(struct denali_nand_info *denali, int op)
+static void denali_setup_dma64(struct denali_nand_info *denali,
+ dma_addr_t dma_addr, int page, int write)
{
uint32_t mode;
const int page_count = 1;
- uint64_t addr = denali->buf.dma_buf;
- mode = MODE_10 | BANK(denali->flash_bank) | denali->page;
+ mode = DENALI_MAP10 | DENALI_BANK(denali) | page;
/* DMA is a three step process */
@@ -988,191 +502,354 @@
* 1. setup transfer type, interrupt when complete,
* burst len = 64 bytes, the number of pages
*/
- index_addr(denali, mode, 0x01002000 | (64 << 16) | op | page_count);
+ denali_host_write(denali, mode,
+ 0x01002000 | (64 << 16) | (write << 8) | page_count);
/* 2. set memory low address */
- index_addr(denali, mode, addr);
+ denali_host_write(denali, mode, dma_addr);
/* 3. set memory high address */
- index_addr(denali, mode, addr >> 32);
+ denali_host_write(denali, mode, (uint64_t)dma_addr >> 32);
}
-static void denali_setup_dma32(struct denali_nand_info *denali, int op)
+static void denali_setup_dma32(struct denali_nand_info *denali,
+ dma_addr_t dma_addr, int page, int write)
{
uint32_t mode;
const int page_count = 1;
- uint32_t addr = denali->buf.dma_buf;
- mode = MODE_10 | BANK(denali->flash_bank);
+ mode = DENALI_MAP10 | DENALI_BANK(denali);
/* DMA is a four step process */
/* 1. setup transfer type and # of pages */
- index_addr(denali, mode | denali->page, 0x2000 | op | page_count);
+ denali_host_write(denali, mode | page,
+ 0x2000 | (write << 8) | page_count);
/* 2. set memory high address bits 23:8 */
- index_addr(denali, mode | ((addr >> 16) << 8), 0x2200);
+ denali_host_write(denali, mode | ((dma_addr >> 16) << 8), 0x2200);
/* 3. set memory low address bits 23:8 */
- index_addr(denali, mode | ((addr & 0xffff) << 8), 0x2300);
+ denali_host_write(denali, mode | ((dma_addr & 0xffff) << 8), 0x2300);
/* 4. interrupt when complete, burst len = 64 bytes */
- index_addr(denali, mode | 0x14000, 0x2400);
+ denali_host_write(denali, mode | 0x14000, 0x2400);
}
-static void denali_setup_dma(struct denali_nand_info *denali, int op)
+static void denali_setup_dma(struct denali_nand_info *denali,
+ dma_addr_t dma_addr, int page, int write)
{
if (denali->caps & DENALI_CAP_DMA_64BIT)
- denali_setup_dma64(denali, op);
+ denali_setup_dma64(denali, dma_addr, page, write);
else
- denali_setup_dma32(denali, op);
+ denali_setup_dma32(denali, dma_addr, page, write);
}
-/*
- * writes a page. user specifies type, and this function handles the
- * configuration details.
- */
-static int write_page(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf, bool raw_xfer)
+static int denali_pio_read(struct denali_nand_info *denali, void *buf,
+ size_t size, int page, int raw)
{
- struct denali_nand_info *denali = mtd_to_denali(mtd);
- dma_addr_t addr = denali->buf.dma_buf;
- size_t size = mtd->writesize + mtd->oobsize;
+ uint32_t addr = DENALI_BANK(denali) | page;
+ uint32_t *buf32 = (uint32_t *)buf;
+ uint32_t irq_status, ecc_err_mask;
+ int i;
+
+ if (denali->caps & DENALI_CAP_HW_ECC_FIXUP)
+ ecc_err_mask = INTR__ECC_UNCOR_ERR;
+ else
+ ecc_err_mask = INTR__ECC_ERR;
+
+ denali_reset_irq(denali);
+
+ iowrite32(DENALI_MAP01 | addr, denali->host + DENALI_HOST_ADDR);
+ for (i = 0; i < size / 4; i++)
+ *buf32++ = ioread32(denali->host + DENALI_HOST_DATA);
+
+ irq_status = denali_wait_for_irq(denali, INTR__PAGE_XFER_INC);
+ if (!(irq_status & INTR__PAGE_XFER_INC))
+ return -EIO;
+
+ if (irq_status & INTR__ERASED_PAGE)
+ memset(buf, 0xff, size);
+
+ return irq_status & ecc_err_mask ? -EBADMSG : 0;
+}
+
+static int denali_pio_write(struct denali_nand_info *denali,
+ const void *buf, size_t size, int page, int raw)
+{
+ uint32_t addr = DENALI_BANK(denali) | page;
+ const uint32_t *buf32 = (uint32_t *)buf;
uint32_t irq_status;
- uint32_t irq_mask = INTR__DMA_CMD_COMP | INTR__PROGRAM_FAIL;
+ int i;
- /*
- * if it is a raw xfer, we want to disable ecc and send the spare area.
- * !raw_xfer - enable ecc
- * raw_xfer - transfer spare
- */
- setup_ecc_for_xfer(denali, !raw_xfer, raw_xfer);
+ denali_reset_irq(denali);
- /* copy buffer into DMA buffer */
- memcpy(denali->buf.buf, buf, mtd->writesize);
+ iowrite32(DENALI_MAP01 | addr, denali->host + DENALI_HOST_ADDR);
+ for (i = 0; i < size / 4; i++)
+ iowrite32(*buf32++, denali->host + DENALI_HOST_DATA);
- if (raw_xfer) {
- /* transfer the data to the spare area */
- memcpy(denali->buf.buf + mtd->writesize,
- chip->oob_poi,
- mtd->oobsize);
- }
-
- dma_sync_single_for_device(denali->dev, addr, size, DMA_TO_DEVICE);
-
- clear_interrupts(denali);
- denali_enable_dma(denali, true);
-
- denali_setup_dma(denali, DENALI_WRITE);
-
- /* wait for operation to complete */
- irq_status = wait_for_irq(denali, irq_mask);
-
- if (irq_status == 0) {
- dev_err(denali->dev, "timeout on write_page (type = %d)\n",
- raw_xfer);
- denali->status = NAND_STATUS_FAIL;
- }
-
- denali_enable_dma(denali, false);
- dma_sync_single_for_cpu(denali->dev, addr, size, DMA_TO_DEVICE);
+ irq_status = denali_wait_for_irq(denali,
+ INTR__PROGRAM_COMP | INTR__PROGRAM_FAIL);
+ if (!(irq_status & INTR__PROGRAM_COMP))
+ return -EIO;
return 0;
}
-/* NAND core entry points */
-
-/*
- * this is the callback that the NAND core calls to write a page. Since
- * writing a page with ECC or without is similar, all the work is done
- * by write_page above.
- */
-static int denali_write_page(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf, int oob_required, int page)
+static int denali_pio_xfer(struct denali_nand_info *denali, void *buf,
+ size_t size, int page, int raw, int write)
{
- /*
- * for regular page writes, we let HW handle all the ECC
- * data written to the device.
- */
- return write_page(mtd, chip, buf, false);
+ if (write)
+ return denali_pio_write(denali, buf, size, page, raw);
+ else
+ return denali_pio_read(denali, buf, size, page, raw);
}
-/*
- * This is the callback that the NAND core calls to write a page without ECC.
- * raw access is similar to ECC page writes, so all the work is done in the
- * write_page() function above.
- */
-static int denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf, int oob_required,
- int page)
+static int denali_dma_xfer(struct denali_nand_info *denali, void *buf,
+ size_t size, int page, int raw, int write)
{
- /*
- * for raw page writes, we want to disable ECC and simply write
- * whatever data is in the buffer.
- */
- return write_page(mtd, chip, buf, true);
+ dma_addr_t dma_addr;
+ uint32_t irq_mask, irq_status, ecc_err_mask;
+ enum dma_data_direction dir = write ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
+ int ret = 0;
+
+ dma_addr = dma_map_single(denali->dev, buf, size, dir);
+ if (dma_mapping_error(denali->dev, dma_addr)) {
+ dev_dbg(denali->dev, "Failed to DMA-map buffer. Trying PIO.\n");
+ return denali_pio_xfer(denali, buf, size, page, raw, write);
+ }
+
+ if (write) {
+ /*
+ * INTR__PROGRAM_COMP is never asserted for the DMA transfer.
+ * We can use INTR__DMA_CMD_COMP instead. This flag is asserted
+ * when the page program is completed.
+ */
+ irq_mask = INTR__DMA_CMD_COMP | INTR__PROGRAM_FAIL;
+ ecc_err_mask = 0;
+ } else if (denali->caps & DENALI_CAP_HW_ECC_FIXUP) {
+ irq_mask = INTR__DMA_CMD_COMP;
+ ecc_err_mask = INTR__ECC_UNCOR_ERR;
+ } else {
+ irq_mask = INTR__DMA_CMD_COMP;
+ ecc_err_mask = INTR__ECC_ERR;
+ }
+
+ denali_enable_dma(denali, true);
+
+ denali_reset_irq(denali);
+ denali_setup_dma(denali, dma_addr, page, write);
+
+ /* wait for operation to complete */
+ irq_status = denali_wait_for_irq(denali, irq_mask);
+ if (!(irq_status & INTR__DMA_CMD_COMP))
+ ret = -EIO;
+ else if (irq_status & ecc_err_mask)
+ ret = -EBADMSG;
+
+ denali_enable_dma(denali, false);
+ dma_unmap_single(denali->dev, dma_addr, size, dir);
+
+ if (irq_status & INTR__ERASED_PAGE)
+ memset(buf, 0xff, size);
+
+ return ret;
}
-static int denali_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
- int page)
+static int denali_data_xfer(struct denali_nand_info *denali, void *buf,
+ size_t size, int page, int raw, int write)
{
- return write_oob_data(mtd, chip->oob_poi, page);
+ setup_ecc_for_xfer(denali, !raw, raw);
+
+ if (denali->dma_avail)
+ return denali_dma_xfer(denali, buf, size, page, raw, write);
+ else
+ return denali_pio_xfer(denali, buf, size, page, raw, write);
+}
+
+static void denali_oob_xfer(struct mtd_info *mtd, struct nand_chip *chip,
+ int page, int write)
+{
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ unsigned int start_cmd = write ? NAND_CMD_SEQIN : NAND_CMD_READ0;
+ unsigned int rnd_cmd = write ? NAND_CMD_RNDIN : NAND_CMD_RNDOUT;
+ int writesize = mtd->writesize;
+ int oobsize = mtd->oobsize;
+ uint8_t *bufpoi = chip->oob_poi;
+ int ecc_steps = chip->ecc.steps;
+ int ecc_size = chip->ecc.size;
+ int ecc_bytes = chip->ecc.bytes;
+ int oob_skip = denali->oob_skip_bytes;
+ size_t size = writesize + oobsize;
+ int i, pos, len;
+
+ /* BBM at the beginning of the OOB area */
+ chip->cmdfunc(mtd, start_cmd, writesize, page);
+ if (write)
+ chip->write_buf(mtd, bufpoi, oob_skip);
+ else
+ chip->read_buf(mtd, bufpoi, oob_skip);
+ bufpoi += oob_skip;
+
+ /* OOB ECC */
+ for (i = 0; i < ecc_steps; i++) {
+ pos = ecc_size + i * (ecc_size + ecc_bytes);
+ len = ecc_bytes;
+
+ if (pos >= writesize)
+ pos += oob_skip;
+ else if (pos + len > writesize)
+ len = writesize - pos;
+
+ chip->cmdfunc(mtd, rnd_cmd, pos, -1);
+ if (write)
+ chip->write_buf(mtd, bufpoi, len);
+ else
+ chip->read_buf(mtd, bufpoi, len);
+ bufpoi += len;
+ if (len < ecc_bytes) {
+ len = ecc_bytes - len;
+ chip->cmdfunc(mtd, rnd_cmd, writesize + oob_skip, -1);
+ if (write)
+ chip->write_buf(mtd, bufpoi, len);
+ else
+ chip->read_buf(mtd, bufpoi, len);
+ bufpoi += len;
+ }
+ }
+
+ /* OOB free */
+ len = oobsize - (bufpoi - chip->oob_poi);
+ chip->cmdfunc(mtd, rnd_cmd, size - len, -1);
+ if (write)
+ chip->write_buf(mtd, bufpoi, len);
+ else
+ chip->read_buf(mtd, bufpoi, len);
+}
+
+static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page)
+{
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ int writesize = mtd->writesize;
+ int oobsize = mtd->oobsize;
+ int ecc_steps = chip->ecc.steps;
+ int ecc_size = chip->ecc.size;
+ int ecc_bytes = chip->ecc.bytes;
+ void *dma_buf = denali->buf;
+ int oob_skip = denali->oob_skip_bytes;
+ size_t size = writesize + oobsize;
+ int ret, i, pos, len;
+
+ ret = denali_data_xfer(denali, dma_buf, size, page, 1, 0);
+ if (ret)
+ return ret;
+
+ /* Arrange the buffer for syndrome payload/ecc layout */
+ if (buf) {
+ for (i = 0; i < ecc_steps; i++) {
+ pos = i * (ecc_size + ecc_bytes);
+ len = ecc_size;
+
+ if (pos >= writesize)
+ pos += oob_skip;
+ else if (pos + len > writesize)
+ len = writesize - pos;
+
+ memcpy(buf, dma_buf + pos, len);
+ buf += len;
+ if (len < ecc_size) {
+ len = ecc_size - len;
+ memcpy(buf, dma_buf + writesize + oob_skip,
+ len);
+ buf += len;
+ }
+ }
+ }
+
+ if (oob_required) {
+ uint8_t *oob = chip->oob_poi;
+
+ /* BBM at the beginning of the OOB area */
+ memcpy(oob, dma_buf + writesize, oob_skip);
+ oob += oob_skip;
+
+ /* OOB ECC */
+ for (i = 0; i < ecc_steps; i++) {
+ pos = ecc_size + i * (ecc_size + ecc_bytes);
+ len = ecc_bytes;
+
+ if (pos >= writesize)
+ pos += oob_skip;
+ else if (pos + len > writesize)
+ len = writesize - pos;
+
+ memcpy(oob, dma_buf + pos, len);
+ oob += len;
+ if (len < ecc_bytes) {
+ len = ecc_bytes - len;
+ memcpy(oob, dma_buf + writesize + oob_skip,
+ len);
+ oob += len;
+ }
+ }
+
+ /* OOB free */
+ len = oobsize - (oob - chip->oob_poi);
+ memcpy(oob, dma_buf + size - len, len);
+ }
+
+ return 0;
}
static int denali_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
int page)
{
- read_oob_data(mtd, chip->oob_poi, page);
+ denali_oob_xfer(mtd, chip, page, 0);
return 0;
}
+static int denali_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
+ int page)
+{
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ int status;
+
+ denali_reset_irq(denali);
+
+ denali_oob_xfer(mtd, chip, page, 1);
+
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+ status = chip->waitfunc(mtd, chip);
+
+ return status & NAND_STATUS_FAIL ? -EIO : 0;
+}
+
static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int oob_required, int page)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
- dma_addr_t addr = denali->buf.dma_buf;
- size_t size = mtd->writesize + mtd->oobsize;
- uint32_t irq_status;
- uint32_t irq_mask = denali->caps & DENALI_CAP_HW_ECC_FIXUP ?
- INTR__DMA_CMD_COMP | INTR__ECC_UNCOR_ERR :
- INTR__ECC_TRANSACTION_DONE | INTR__ECC_ERR;
unsigned long uncor_ecc_flags = 0;
int stat = 0;
+ int ret;
- if (page != denali->page) {
- dev_err(denali->dev,
- "IN %s: page %d is not equal to denali->page %d",
- __func__, page, denali->page);
- BUG();
- }
-
- setup_ecc_for_xfer(denali, true, false);
-
- denali_enable_dma(denali, true);
- dma_sync_single_for_device(denali->dev, addr, size, DMA_FROM_DEVICE);
-
- clear_interrupts(denali);
- denali_setup_dma(denali, DENALI_READ);
-
- /* wait for operation to complete */
- irq_status = wait_for_irq(denali, irq_mask);
-
- dma_sync_single_for_cpu(denali->dev, addr, size, DMA_FROM_DEVICE);
-
- memcpy(buf, denali->buf.buf, mtd->writesize);
+ ret = denali_data_xfer(denali, buf, mtd->writesize, page, 0, 0);
+ if (ret && ret != -EBADMSG)
+ return ret;
if (denali->caps & DENALI_CAP_HW_ECC_FIXUP)
stat = denali_hw_ecc_fixup(mtd, denali, &uncor_ecc_flags);
- else if (irq_status & INTR__ECC_ERR)
+ else if (ret == -EBADMSG)
stat = denali_sw_ecc_fixup(mtd, denali, &uncor_ecc_flags, buf);
- denali_enable_dma(denali, false);
if (stat < 0)
return stat;
if (uncor_ecc_flags) {
- read_oob_data(mtd, chip->oob_poi, denali->page);
+ ret = denali_read_oob(mtd, chip, page);
+ if (ret)
+ return ret;
stat = denali_check_erased_page(mtd, chip, buf,
uncor_ecc_flags, stat);
@@ -1181,137 +858,266 @@
return stat;
}
-static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf, int oob_required, int page)
+static int denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required, int page)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
- dma_addr_t addr = denali->buf.dma_buf;
- size_t size = mtd->writesize + mtd->oobsize;
- uint32_t irq_mask = INTR__DMA_CMD_COMP;
+ int writesize = mtd->writesize;
+ int oobsize = mtd->oobsize;
+ int ecc_steps = chip->ecc.steps;
+ int ecc_size = chip->ecc.size;
+ int ecc_bytes = chip->ecc.bytes;
+ void *dma_buf = denali->buf;
+ int oob_skip = denali->oob_skip_bytes;
+ size_t size = writesize + oobsize;
+ int i, pos, len;
- if (page != denali->page) {
- dev_err(denali->dev,
- "IN %s: page %d is not equal to denali->page %d",
- __func__, page, denali->page);
- BUG();
+ /*
+ * Fill the buffer with 0xff first except the full page transfer.
+ * This simplifies the logic.
+ */
+ if (!buf || !oob_required)
+ memset(dma_buf, 0xff, size);
+
+ /* Arrange the buffer for syndrome payload/ecc layout */
+ if (buf) {
+ for (i = 0; i < ecc_steps; i++) {
+ pos = i * (ecc_size + ecc_bytes);
+ len = ecc_size;
+
+ if (pos >= writesize)
+ pos += oob_skip;
+ else if (pos + len > writesize)
+ len = writesize - pos;
+
+ memcpy(dma_buf + pos, buf, len);
+ buf += len;
+ if (len < ecc_size) {
+ len = ecc_size - len;
+ memcpy(dma_buf + writesize + oob_skip, buf,
+ len);
+ buf += len;
+ }
+ }
}
- setup_ecc_for_xfer(denali, false, true);
- denali_enable_dma(denali, true);
+ if (oob_required) {
+ const uint8_t *oob = chip->oob_poi;
- dma_sync_single_for_device(denali->dev, addr, size, DMA_FROM_DEVICE);
+ /* BBM at the beginning of the OOB area */
+ memcpy(dma_buf + writesize, oob, oob_skip);
+ oob += oob_skip;
- clear_interrupts(denali);
- denali_setup_dma(denali, DENALI_READ);
+ /* OOB ECC */
+ for (i = 0; i < ecc_steps; i++) {
+ pos = ecc_size + i * (ecc_size + ecc_bytes);
+ len = ecc_bytes;
- /* wait for operation to complete */
- wait_for_irq(denali, irq_mask);
+ if (pos >= writesize)
+ pos += oob_skip;
+ else if (pos + len > writesize)
+ len = writesize - pos;
- dma_sync_single_for_cpu(denali->dev, addr, size, DMA_FROM_DEVICE);
+ memcpy(dma_buf + pos, oob, len);
+ oob += len;
+ if (len < ecc_bytes) {
+ len = ecc_bytes - len;
+ memcpy(dma_buf + writesize + oob_skip, oob,
+ len);
+ oob += len;
+ }
+ }
- denali_enable_dma(denali, false);
+ /* OOB free */
+ len = oobsize - (oob - chip->oob_poi);
+ memcpy(dma_buf + size - len, oob, len);
+ }
- memcpy(buf, denali->buf.buf, mtd->writesize);
- memcpy(chip->oob_poi, denali->buf.buf + mtd->writesize, mtd->oobsize);
-
- return 0;
+ return denali_data_xfer(denali, dma_buf, size, page, 1, 1);
}
-static uint8_t denali_read_byte(struct mtd_info *mtd)
+static int denali_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required, int page)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
- uint8_t result = 0xff;
- if (denali->buf.head < denali->buf.tail)
- result = denali->buf.buf[denali->buf.head++];
-
- return result;
+ return denali_data_xfer(denali, (void *)buf, mtd->writesize,
+ page, 0, 1);
}
static void denali_select_chip(struct mtd_info *mtd, int chip)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
- spin_lock_irq(&denali->irq_lock);
- denali->flash_bank = chip;
- spin_unlock_irq(&denali->irq_lock);
+ denali->active_bank = chip;
}
static int denali_waitfunc(struct mtd_info *mtd, struct nand_chip *chip)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
- int status = denali->status;
+ uint32_t irq_status;
- denali->status = 0;
+ /* R/B# pin transitioned from low to high? */
+ irq_status = denali_wait_for_irq(denali, INTR__INT_ACT);
- return status;
+ return irq_status & INTR__INT_ACT ? 0 : NAND_STATUS_FAIL;
}
static int denali_erase(struct mtd_info *mtd, int page)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
+ uint32_t irq_status;
- uint32_t cmd, irq_status;
+ denali_reset_irq(denali);
- clear_interrupts(denali);
-
- /* setup page read request for access type */
- cmd = MODE_10 | BANK(denali->flash_bank) | page;
- index_addr(denali, cmd, 0x1);
+ denali_host_write(denali, DENALI_MAP10 | DENALI_BANK(denali) | page,
+ DENALI_ERASE);
/* wait for erase to complete or failure to occur */
- irq_status = wait_for_irq(denali, INTR__ERASE_COMP | INTR__ERASE_FAIL);
+ irq_status = denali_wait_for_irq(denali,
+ INTR__ERASE_COMP | INTR__ERASE_FAIL);
- return irq_status & INTR__ERASE_FAIL ? NAND_STATUS_FAIL : PASS;
+ return irq_status & INTR__ERASE_COMP ? 0 : NAND_STATUS_FAIL;
}
-static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
- int page)
+#define DIV_ROUND_DOWN_ULL(ll, d) \
+ ({ unsigned long long _tmp = (ll); do_div(_tmp, d); _tmp; })
+
+static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr,
+ const struct nand_data_interface *conf)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
- uint32_t addr, id;
+ const struct nand_sdr_timings *timings;
+ unsigned long t_clk;
+ int acc_clks, re_2_we, re_2_re, we_2_re, addr_2_data;
+ int rdwr_en_lo, rdwr_en_hi, rdwr_en_lo_hi, cs_setup;
+ int addr_2_data_mask;
+ uint32_t tmp;
+
+ timings = nand_get_sdr_timings(conf);
+ if (IS_ERR(timings))
+ return PTR_ERR(timings);
+
+ /* clk_x period in picoseconds */
+ t_clk = DIV_ROUND_DOWN_ULL(1000000000000ULL, denali->clk_x_rate);
+ if (!t_clk)
+ return -EINVAL;
+
+ if (chipnr == NAND_DATA_IFACE_CHECK_ONLY)
+ return 0;
+
+ /* tREA -> ACC_CLKS */
+ acc_clks = DIV_ROUND_UP(timings->tREA_max, t_clk);
+ acc_clks = min_t(int, acc_clks, ACC_CLKS__VALUE);
+
+ tmp = ioread32(denali->reg + ACC_CLKS);
+ tmp &= ~ACC_CLKS__VALUE;
+ tmp |= acc_clks;
+ iowrite32(tmp, denali->reg + ACC_CLKS);
+
+ /* tRWH -> RE_2_WE */
+ re_2_we = DIV_ROUND_UP(timings->tRHW_min, t_clk);
+ re_2_we = min_t(int, re_2_we, RE_2_WE__VALUE);
+
+ tmp = ioread32(denali->reg + RE_2_WE);
+ tmp &= ~RE_2_WE__VALUE;
+ tmp |= re_2_we;
+ iowrite32(tmp, denali->reg + RE_2_WE);
+
+ /* tRHZ -> RE_2_RE */
+ re_2_re = DIV_ROUND_UP(timings->tRHZ_max, t_clk);
+ re_2_re = min_t(int, re_2_re, RE_2_RE__VALUE);
+
+ tmp = ioread32(denali->reg + RE_2_RE);
+ tmp &= ~RE_2_RE__VALUE;
+ tmp |= re_2_re;
+ iowrite32(tmp, denali->reg + RE_2_RE);
+
+ /* tWHR -> WE_2_RE */
+ we_2_re = DIV_ROUND_UP(timings->tWHR_min, t_clk);
+ we_2_re = min_t(int, we_2_re, TWHR2_AND_WE_2_RE__WE_2_RE);
+
+ tmp = ioread32(denali->reg + TWHR2_AND_WE_2_RE);
+ tmp &= ~TWHR2_AND_WE_2_RE__WE_2_RE;
+ tmp |= we_2_re;
+ iowrite32(tmp, denali->reg + TWHR2_AND_WE_2_RE);
+
+ /* tADL -> ADDR_2_DATA */
+
+ /* for older versions, ADDR_2_DATA is only 6 bit wide */
+ addr_2_data_mask = TCWAW_AND_ADDR_2_DATA__ADDR_2_DATA;
+ if (denali->revision < 0x0501)
+ addr_2_data_mask >>= 1;
+
+ addr_2_data = DIV_ROUND_UP(timings->tADL_min, t_clk);
+ addr_2_data = min_t(int, addr_2_data, addr_2_data_mask);
+
+ tmp = ioread32(denali->reg + TCWAW_AND_ADDR_2_DATA);
+ tmp &= ~addr_2_data_mask;
+ tmp |= addr_2_data;
+ iowrite32(tmp, denali->reg + TCWAW_AND_ADDR_2_DATA);
+
+ /* tREH, tWH -> RDWR_EN_HI_CNT */
+ rdwr_en_hi = DIV_ROUND_UP(max(timings->tREH_min, timings->tWH_min),
+ t_clk);
+ rdwr_en_hi = min_t(int, rdwr_en_hi, RDWR_EN_HI_CNT__VALUE);
+
+ tmp = ioread32(denali->reg + RDWR_EN_HI_CNT);
+ tmp &= ~RDWR_EN_HI_CNT__VALUE;
+ tmp |= rdwr_en_hi;
+ iowrite32(tmp, denali->reg + RDWR_EN_HI_CNT);
+
+ /* tRP, tWP -> RDWR_EN_LO_CNT */
+ rdwr_en_lo = DIV_ROUND_UP(max(timings->tRP_min, timings->tWP_min),
+ t_clk);
+ rdwr_en_lo_hi = DIV_ROUND_UP(max(timings->tRC_min, timings->tWC_min),
+ t_clk);
+ rdwr_en_lo_hi = max(rdwr_en_lo_hi, DENALI_CLK_X_MULT);
+ rdwr_en_lo = max(rdwr_en_lo, rdwr_en_lo_hi - rdwr_en_hi);
+ rdwr_en_lo = min_t(int, rdwr_en_lo, RDWR_EN_LO_CNT__VALUE);
+
+ tmp = ioread32(denali->reg + RDWR_EN_LO_CNT);
+ tmp &= ~RDWR_EN_LO_CNT__VALUE;
+ tmp |= rdwr_en_lo;
+ iowrite32(tmp, denali->reg + RDWR_EN_LO_CNT);
+
+ /* tCS, tCEA -> CS_SETUP_CNT */
+ cs_setup = max3((int)DIV_ROUND_UP(timings->tCS_min, t_clk) - rdwr_en_lo,
+ (int)DIV_ROUND_UP(timings->tCEA_max, t_clk) - acc_clks,
+ 0);
+ cs_setup = min_t(int, cs_setup, CS_SETUP_CNT__VALUE);
+
+ tmp = ioread32(denali->reg + CS_SETUP_CNT);
+ tmp &= ~CS_SETUP_CNT__VALUE;
+ tmp |= cs_setup;
+ iowrite32(tmp, denali->reg + CS_SETUP_CNT);
+
+ return 0;
+}
+
+static void denali_reset_banks(struct denali_nand_info *denali)
+{
+ u32 irq_status;
int i;
- switch (cmd) {
- case NAND_CMD_PAGEPROG:
- break;
- case NAND_CMD_STATUS:
- read_status(denali);
- break;
- case NAND_CMD_READID:
- case NAND_CMD_PARAM:
- reset_buf(denali);
- /*
- * sometimes ManufactureId read from register is not right
- * e.g. some of Micron MT29F32G08QAA MLC NAND chips
- * So here we send READID cmd to NAND insteand
- */
- addr = MODE_11 | BANK(denali->flash_bank);
- index_addr(denali, addr | 0, 0x90);
- index_addr(denali, addr | 1, col);
- for (i = 0; i < 8; i++) {
- index_addr_read_data(denali, addr | 2, &id);
- write_byte_to_buf(denali, id);
- }
- break;
- case NAND_CMD_READ0:
- case NAND_CMD_SEQIN:
- denali->page = page;
- break;
- case NAND_CMD_RESET:
- reset_bank(denali);
- break;
- case NAND_CMD_READOOB:
- /* TODO: Read OOB data */
- break;
- default:
- pr_err(": unsupported command received 0x%x\n", cmd);
- break;
- }
-}
-/* end NAND core entry points */
+ for (i = 0; i < denali->max_banks; i++) {
+ denali->active_bank = i;
-/* Initialization code to bring the device up to a known good state */
+ denali_reset_irq(denali);
+
+ iowrite32(DEVICE_RESET__BANK(i),
+ denali->reg + DEVICE_RESET);
+
+ irq_status = denali_wait_for_irq(denali,
+ INTR__RST_COMP | INTR__INT_ACT | INTR__TIME_OUT);
+ if (!(irq_status & INTR__INT_ACT))
+ break;
+ }
+
+ dev_dbg(denali->dev, "%d chips connected\n", i);
+ denali->max_banks = i;
+}
+
static void denali_hw_init(struct denali_nand_info *denali)
{
/*
@@ -1319,8 +1125,7 @@
* override it.
*/
if (!denali->revision)
- denali->revision =
- swab16(ioread32(denali->flash_reg + REVISION));
+ denali->revision = swab16(ioread32(denali->reg + REVISION));
/*
* tell driver how many bit controller will skip before
@@ -1328,30 +1133,51 @@
* set by firmware. So we read this value out.
* if this value is 0, just let it be.
*/
- denali->bbtskipbytes = ioread32(denali->flash_reg +
- SPARE_AREA_SKIP_BYTES);
+ denali->oob_skip_bytes = ioread32(denali->reg + SPARE_AREA_SKIP_BYTES);
detect_max_banks(denali);
- denali_nand_reset(denali);
- iowrite32(0x0F, denali->flash_reg + RB_PIN_ENABLED);
- iowrite32(CHIP_EN_DONT_CARE__FLAG,
- denali->flash_reg + CHIP_ENABLE_DONT_CARE);
+ iowrite32(0x0F, denali->reg + RB_PIN_ENABLED);
+ iowrite32(CHIP_EN_DONT_CARE__FLAG, denali->reg + CHIP_ENABLE_DONT_CARE);
- iowrite32(0xffff, denali->flash_reg + SPARE_AREA_MARKER);
+ iowrite32(0xffff, denali->reg + SPARE_AREA_MARKER);
/* Should set value for these registers when init */
- iowrite32(0, denali->flash_reg + TWO_ROW_ADDR_CYCLES);
- iowrite32(1, denali->flash_reg + ECC_ENABLE);
- denali_nand_timing_set(denali);
- denali_irq_init(denali);
+ iowrite32(0, denali->reg + TWO_ROW_ADDR_CYCLES);
+ iowrite32(1, denali->reg + ECC_ENABLE);
}
-/*
- * Althogh controller spec said SLC ECC is forceb to be 4bit,
- * but denali controller in MRST only support 15bit and 8bit ECC
- * correction
- */
-#define ECC_8BITS 14
-#define ECC_15BITS 26
+int denali_calc_ecc_bytes(int step_size, int strength)
+{
+ /* BCH code. Denali requires ecc.bytes to be multiple of 2 */
+ return DIV_ROUND_UP(strength * fls(step_size * 8), 16) * 2;
+}
+EXPORT_SYMBOL(denali_calc_ecc_bytes);
+
+static int denali_ecc_setup(struct mtd_info *mtd, struct nand_chip *chip,
+ struct denali_nand_info *denali)
+{
+ int oobavail = mtd->oobsize - denali->oob_skip_bytes;
+ int ret;
+
+ /*
+ * If .size and .strength are already set (usually by DT),
+ * check if they are supported by this controller.
+ */
+ if (chip->ecc.size && chip->ecc.strength)
+ return nand_check_ecc_caps(chip, denali->ecc_caps, oobavail);
+
+ /*
+ * We want .size and .strength closest to the chip's requirement
+ * unless NAND_ECC_MAXIMIZE is requested.
+ */
+ if (!(chip->ecc.options & NAND_ECC_MAXIMIZE)) {
+ ret = nand_match_ecc_req(chip, denali->ecc_caps, oobavail);
+ if (!ret)
+ return 0;
+ }
+
+ /* Max ECC strength is the last thing we can do */
+ return nand_maximize_ecc(chip, denali->ecc_caps, oobavail);
+}
static int denali_ooblayout_ecc(struct mtd_info *mtd, int section,
struct mtd_oob_region *oobregion)
@@ -1362,7 +1188,7 @@
if (section)
return -ERANGE;
- oobregion->offset = denali->bbtskipbytes;
+ oobregion->offset = denali->oob_skip_bytes;
oobregion->length = chip->ecc.total;
return 0;
@@ -1377,7 +1203,7 @@
if (section)
return -ERANGE;
- oobregion->offset = chip->ecc.total + denali->bbtskipbytes;
+ oobregion->offset = chip->ecc.total + denali->oob_skip_bytes;
oobregion->length = mtd->oobsize - oobregion->offset;
return 0;
@@ -1388,29 +1214,6 @@
.free = denali_ooblayout_free,
};
-static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' };
-static uint8_t mirror_pattern[] = {'1', 't', 'b', 'B' };
-
-static struct nand_bbt_descr bbt_main_descr = {
- .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
- | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
- .offs = 8,
- .len = 4,
- .veroffs = 12,
- .maxblocks = 4,
- .pattern = bbt_pattern,
-};
-
-static struct nand_bbt_descr bbt_mirror_descr = {
- .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
- | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
- .offs = 8,
- .len = 4,
- .veroffs = 12,
- .maxblocks = 4,
- .pattern = mirror_pattern,
-};
-
/* initialize driver data structures */
static void denali_drv_init(struct denali_nand_info *denali)
{
@@ -1425,12 +1228,6 @@
* element that might be access shared data (interrupt status)
*/
spin_lock_init(&denali->irq_lock);
-
- /* indicate that MTD has not selected a valid bank yet */
- denali->flash_bank = CHIP_SELECT_INVALID;
-
- /* initialize our irq_status variable to indicate no interrupts */
- denali->irq_status = 0;
}
static int denali_multidev_fixup(struct denali_nand_info *denali)
@@ -1445,23 +1242,23 @@
* In this case, the core framework knows nothing about this fact,
* so we should tell it the _logical_ pagesize and anything necessary.
*/
- denali->devnum = ioread32(denali->flash_reg + DEVICES_CONNECTED);
+ denali->devs_per_cs = ioread32(denali->reg + DEVICES_CONNECTED);
/*
* On some SoCs, DEVICES_CONNECTED is not auto-detected.
* For those, DEVICES_CONNECTED is left to 0. Set 1 if it is the case.
*/
- if (denali->devnum == 0) {
- denali->devnum = 1;
- iowrite32(1, denali->flash_reg + DEVICES_CONNECTED);
+ if (denali->devs_per_cs == 0) {
+ denali->devs_per_cs = 1;
+ iowrite32(1, denali->reg + DEVICES_CONNECTED);
}
- if (denali->devnum == 1)
+ if (denali->devs_per_cs == 1)
return 0;
- if (denali->devnum != 2) {
+ if (denali->devs_per_cs != 2) {
dev_err(denali->dev, "unsupported number of devices %d\n",
- denali->devnum);
+ denali->devs_per_cs);
return -EINVAL;
}
@@ -1479,7 +1276,7 @@
chip->ecc.size <<= 1;
chip->ecc.bytes <<= 1;
chip->ecc.strength <<= 1;
- denali->bbtskipbytes <<= 1;
+ denali->oob_skip_bytes <<= 1;
return 0;
}
@@ -1490,27 +1287,12 @@
struct mtd_info *mtd = nand_to_mtd(chip);
int ret;
- if (denali->platform == INTEL_CE4100) {
- /*
- * Due to a silicon limitation, we can only support
- * ONFI timing mode 1 and below.
- */
- if (onfi_timing_mode < -1 || onfi_timing_mode > 1) {
- pr_err("Intel CE4100 only supports ONFI timing mode 1 or below\n");
- return -EINVAL;
- }
- }
-
- /* allocate a temporary buffer for nand_scan_ident() */
- denali->buf.buf = devm_kzalloc(denali->dev, PAGE_SIZE,
- GFP_DMA | GFP_KERNEL);
- if (!denali->buf.buf)
- return -ENOMEM;
-
mtd->dev.parent = denali->dev;
denali_hw_init(denali);
denali_drv_init(denali);
+ denali_clear_irq_all(denali);
+
/* Request IRQ after all the hardware initialization is finished */
ret = devm_request_irq(denali->dev, denali->irq, denali_isr,
IRQF_SHARED, DENALI_NAND_NAME, denali);
@@ -1519,8 +1301,11 @@
return ret;
}
- /* now that our ISR is registered, we can enable interrupts */
- denali_set_intr_modes(denali, true);
+ denali_enable_irq(denali);
+ denali_reset_banks(denali);
+
+ denali->active_bank = DENALI_INVALID_BANK;
+
nand_set_flash_node(chip, denali->dev->of_node);
/* Fallback to the default name if DT did not give "label" property */
if (!mtd->name)
@@ -1528,10 +1313,17 @@
/* register the driver with the NAND core subsystem */
chip->select_chip = denali_select_chip;
- chip->cmdfunc = denali_cmdfunc;
chip->read_byte = denali_read_byte;
+ chip->write_byte = denali_write_byte;
+ chip->read_word = denali_read_word;
+ chip->cmd_ctrl = denali_cmd_ctrl;
+ chip->dev_ready = denali_dev_ready;
chip->waitfunc = denali_waitfunc;
+ /* clk rate info is needed for setup_data_interface */
+ if (denali->clk_x_rate)
+ chip->setup_data_interface = denali_setup_data_interface;
+
/*
* scan for NAND devices attached to the controller
* this is the first stage in a two step process to register
@@ -1539,33 +1331,25 @@
*/
ret = nand_scan_ident(mtd, denali->max_banks, NULL);
if (ret)
- goto failed_req_irq;
+ goto disable_irq;
- /* allocate the right size buffer now */
- devm_kfree(denali->dev, denali->buf.buf);
- denali->buf.buf = devm_kzalloc(denali->dev,
- mtd->writesize + mtd->oobsize,
- GFP_KERNEL);
- if (!denali->buf.buf) {
- ret = -ENOMEM;
- goto failed_req_irq;
+ if (ioread32(denali->reg + FEATURES) & FEATURES__DMA)
+ denali->dma_avail = 1;
+
+ if (denali->dma_avail) {
+ int dma_bit = denali->caps & DENALI_CAP_DMA_64BIT ? 64 : 32;
+
+ ret = dma_set_mask(denali->dev, DMA_BIT_MASK(dma_bit));
+ if (ret) {
+ dev_info(denali->dev,
+ "Failed to set DMA mask. Disabling DMA.\n");
+ denali->dma_avail = 0;
+ }
}
- ret = dma_set_mask(denali->dev,
- DMA_BIT_MASK(denali->caps & DENALI_CAP_DMA_64BIT ?
- 64 : 32));
- if (ret) {
- dev_err(denali->dev, "No usable DMA configuration\n");
- goto failed_req_irq;
- }
-
- denali->buf.dma_buf = dma_map_single(denali->dev, denali->buf.buf,
- mtd->writesize + mtd->oobsize,
- DMA_BIDIRECTIONAL);
- if (dma_mapping_error(denali->dev, denali->buf.dma_buf)) {
- dev_err(denali->dev, "Failed to map DMA buffer\n");
- ret = -EIO;
- goto failed_req_irq;
+ if (denali->dma_avail) {
+ chip->options |= NAND_USE_BOUNCE_BUFFER;
+ chip->buf_align = 16;
}
/*
@@ -1574,46 +1358,49 @@
* bad block management.
*/
- /* Bad block management */
- chip->bbt_td = &bbt_main_descr;
- chip->bbt_md = &bbt_mirror_descr;
-
- /* skip the scan for now until we have OOB read and write support */
chip->bbt_options |= NAND_BBT_USE_FLASH;
- chip->options |= NAND_SKIP_BBTSCAN;
+ chip->bbt_options |= NAND_BBT_NO_OOB;
+
chip->ecc.mode = NAND_ECC_HW_SYNDROME;
/* no subpage writes on denali */
chip->options |= NAND_NO_SUBPAGE_WRITE;
- /*
- * Denali Controller only support 15bit and 8bit ECC in MRST,
- * so just let controller do 15bit ECC for MLC and 8bit ECC for
- * SLC if possible.
- * */
- if (!nand_is_slc(chip) &&
- (mtd->oobsize > (denali->bbtskipbytes +
- ECC_15BITS * (mtd->writesize /
- ECC_SECTOR_SIZE)))) {
- /* if MLC OOB size is large enough, use 15bit ECC*/
- chip->ecc.strength = 15;
- chip->ecc.bytes = ECC_15BITS;
- iowrite32(15, denali->flash_reg + ECC_CORRECTION);
- } else if (mtd->oobsize < (denali->bbtskipbytes +
- ECC_8BITS * (mtd->writesize /
- ECC_SECTOR_SIZE))) {
- pr_err("Your NAND chip OOB is not large enough to contain 8bit ECC correction codes");
- goto failed_req_irq;
- } else {
- chip->ecc.strength = 8;
- chip->ecc.bytes = ECC_8BITS;
- iowrite32(8, denali->flash_reg + ECC_CORRECTION);
+ ret = denali_ecc_setup(mtd, chip, denali);
+ if (ret) {
+ dev_err(denali->dev, "Failed to setup ECC settings.\n");
+ goto disable_irq;
}
+ dev_dbg(denali->dev,
+ "chosen ECC settings: step=%d, strength=%d, bytes=%d\n",
+ chip->ecc.size, chip->ecc.strength, chip->ecc.bytes);
+
+ iowrite32(MAKE_ECC_CORRECTION(chip->ecc.strength, 1),
+ denali->reg + ECC_CORRECTION);
+ iowrite32(mtd->erasesize / mtd->writesize,
+ denali->reg + PAGES_PER_BLOCK);
+ iowrite32(chip->options & NAND_BUSWIDTH_16 ? 1 : 0,
+ denali->reg + DEVICE_WIDTH);
+ iowrite32(mtd->writesize, denali->reg + DEVICE_MAIN_AREA_SIZE);
+ iowrite32(mtd->oobsize, denali->reg + DEVICE_SPARE_AREA_SIZE);
+
+ iowrite32(chip->ecc.size, denali->reg + CFG_DATA_BLOCK_SIZE);
+ iowrite32(chip->ecc.size, denali->reg + CFG_LAST_DATA_BLOCK_SIZE);
+ /* chip->ecc.steps is set by nand_scan_tail(); not available here */
+ iowrite32(mtd->writesize / chip->ecc.size,
+ denali->reg + CFG_NUM_DATA_BLOCKS);
+
mtd_set_ooblayout(mtd, &denali_ooblayout_ops);
- /* override the default read operations */
- chip->ecc.size = ECC_SECTOR_SIZE;
+ if (chip->options & NAND_BUSWIDTH_16) {
+ chip->read_buf = denali_read_buf16;
+ chip->write_buf = denali_write_buf16;
+ } else {
+ chip->read_buf = denali_read_buf;
+ chip->write_buf = denali_write_buf;
+ }
+ chip->ecc.options |= NAND_ECC_CUSTOM_PAGE_ACCESS;
chip->ecc.read_page = denali_read_page;
chip->ecc.read_page_raw = denali_read_page_raw;
chip->ecc.write_page = denali_write_page;
@@ -1624,21 +1411,34 @@
ret = denali_multidev_fixup(denali);
if (ret)
- goto failed_req_irq;
+ goto disable_irq;
+
+ /*
+ * This buffer is DMA-mapped by denali_{read,write}_page_raw. Do not
+ * use devm_kmalloc() because the memory allocated by devm_ does not
+ * guarantee DMA-safe alignment.
+ */
+ denali->buf = kmalloc(mtd->writesize + mtd->oobsize, GFP_KERNEL);
+ if (!denali->buf) {
+ ret = -ENOMEM;
+ goto disable_irq;
+ }
ret = nand_scan_tail(mtd);
if (ret)
- goto failed_req_irq;
+ goto free_buf;
ret = mtd_device_register(mtd, NULL, 0);
if (ret) {
dev_err(denali->dev, "Failed to register MTD: %d\n", ret);
- goto failed_req_irq;
+ goto free_buf;
}
return 0;
-failed_req_irq:
- denali_irq_cleanup(denali->irq, denali);
+free_buf:
+ kfree(denali->buf);
+disable_irq:
+ denali_disable_irq(denali);
return ret;
}
@@ -1648,16 +1448,9 @@
void denali_remove(struct denali_nand_info *denali)
{
struct mtd_info *mtd = nand_to_mtd(&denali->nand);
- /*
- * Pre-compute DMA buffer size to avoid any problems in case
- * nand_release() ever changes in a way that mtd->writesize and
- * mtd->oobsize are not reliable after this call.
- */
- int bufsize = mtd->writesize + mtd->oobsize;
nand_release(mtd);
- denali_irq_cleanup(denali->irq, denali);
- dma_unmap_single(denali->dev, denali->buf.dma_buf, bufsize,
- DMA_BIDIRECTIONAL);
+ kfree(denali->buf);
+ denali_disable_irq(denali);
}
EXPORT_SYMBOL(denali_remove);
diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h
index ec00485..237cc70 100644
--- a/drivers/mtd/nand/denali.h
+++ b/drivers/mtd/nand/denali.h
@@ -24,330 +24,315 @@
#include <linux/mtd/nand.h>
#define DEVICE_RESET 0x0
-#define DEVICE_RESET__BANK0 0x0001
-#define DEVICE_RESET__BANK1 0x0002
-#define DEVICE_RESET__BANK2 0x0004
-#define DEVICE_RESET__BANK3 0x0008
+#define DEVICE_RESET__BANK(bank) BIT(bank)
#define TRANSFER_SPARE_REG 0x10
-#define TRANSFER_SPARE_REG__FLAG 0x0001
+#define TRANSFER_SPARE_REG__FLAG BIT(0)
#define LOAD_WAIT_CNT 0x20
-#define LOAD_WAIT_CNT__VALUE 0xffff
+#define LOAD_WAIT_CNT__VALUE GENMASK(15, 0)
#define PROGRAM_WAIT_CNT 0x30
-#define PROGRAM_WAIT_CNT__VALUE 0xffff
+#define PROGRAM_WAIT_CNT__VALUE GENMASK(15, 0)
#define ERASE_WAIT_CNT 0x40
-#define ERASE_WAIT_CNT__VALUE 0xffff
+#define ERASE_WAIT_CNT__VALUE GENMASK(15, 0)
#define INT_MON_CYCCNT 0x50
-#define INT_MON_CYCCNT__VALUE 0xffff
+#define INT_MON_CYCCNT__VALUE GENMASK(15, 0)
#define RB_PIN_ENABLED 0x60
-#define RB_PIN_ENABLED__BANK0 0x0001
-#define RB_PIN_ENABLED__BANK1 0x0002
-#define RB_PIN_ENABLED__BANK2 0x0004
-#define RB_PIN_ENABLED__BANK3 0x0008
+#define RB_PIN_ENABLED__BANK(bank) BIT(bank)
#define MULTIPLANE_OPERATION 0x70
-#define MULTIPLANE_OPERATION__FLAG 0x0001
+#define MULTIPLANE_OPERATION__FLAG BIT(0)
#define MULTIPLANE_READ_ENABLE 0x80
-#define MULTIPLANE_READ_ENABLE__FLAG 0x0001
+#define MULTIPLANE_READ_ENABLE__FLAG BIT(0)
#define COPYBACK_DISABLE 0x90
-#define COPYBACK_DISABLE__FLAG 0x0001
+#define COPYBACK_DISABLE__FLAG BIT(0)
#define CACHE_WRITE_ENABLE 0xa0
-#define CACHE_WRITE_ENABLE__FLAG 0x0001
+#define CACHE_WRITE_ENABLE__FLAG BIT(0)
#define CACHE_READ_ENABLE 0xb0
-#define CACHE_READ_ENABLE__FLAG 0x0001
+#define CACHE_READ_ENABLE__FLAG BIT(0)
#define PREFETCH_MODE 0xc0
-#define PREFETCH_MODE__PREFETCH_EN 0x0001
-#define PREFETCH_MODE__PREFETCH_BURST_LENGTH 0xfff0
+#define PREFETCH_MODE__PREFETCH_EN BIT(0)
+#define PREFETCH_MODE__PREFETCH_BURST_LENGTH GENMASK(15, 4)
#define CHIP_ENABLE_DONT_CARE 0xd0
-#define CHIP_EN_DONT_CARE__FLAG 0x01
+#define CHIP_EN_DONT_CARE__FLAG BIT(0)
#define ECC_ENABLE 0xe0
-#define ECC_ENABLE__FLAG 0x0001
+#define ECC_ENABLE__FLAG BIT(0)
#define GLOBAL_INT_ENABLE 0xf0
-#define GLOBAL_INT_EN_FLAG 0x01
+#define GLOBAL_INT_EN_FLAG BIT(0)
-#define WE_2_RE 0x100
-#define WE_2_RE__VALUE 0x003f
+#define TWHR2_AND_WE_2_RE 0x100
+#define TWHR2_AND_WE_2_RE__WE_2_RE GENMASK(5, 0)
+#define TWHR2_AND_WE_2_RE__TWHR2 GENMASK(13, 8)
-#define ADDR_2_DATA 0x110
-#define ADDR_2_DATA__VALUE 0x003f
+#define TCWAW_AND_ADDR_2_DATA 0x110
+/* The width of ADDR_2_DATA is 6 bit for old IP, 7 bit for new IP */
+#define TCWAW_AND_ADDR_2_DATA__ADDR_2_DATA GENMASK(6, 0)
+#define TCWAW_AND_ADDR_2_DATA__TCWAW GENMASK(13, 8)
#define RE_2_WE 0x120
-#define RE_2_WE__VALUE 0x003f
+#define RE_2_WE__VALUE GENMASK(5, 0)
#define ACC_CLKS 0x130
-#define ACC_CLKS__VALUE 0x000f
+#define ACC_CLKS__VALUE GENMASK(3, 0)
#define NUMBER_OF_PLANES 0x140
-#define NUMBER_OF_PLANES__VALUE 0x0007
+#define NUMBER_OF_PLANES__VALUE GENMASK(2, 0)
#define PAGES_PER_BLOCK 0x150
-#define PAGES_PER_BLOCK__VALUE 0xffff
+#define PAGES_PER_BLOCK__VALUE GENMASK(15, 0)
#define DEVICE_WIDTH 0x160
-#define DEVICE_WIDTH__VALUE 0x0003
+#define DEVICE_WIDTH__VALUE GENMASK(1, 0)
#define DEVICE_MAIN_AREA_SIZE 0x170
-#define DEVICE_MAIN_AREA_SIZE__VALUE 0xffff
+#define DEVICE_MAIN_AREA_SIZE__VALUE GENMASK(15, 0)
#define DEVICE_SPARE_AREA_SIZE 0x180
-#define DEVICE_SPARE_AREA_SIZE__VALUE 0xffff
+#define DEVICE_SPARE_AREA_SIZE__VALUE GENMASK(15, 0)
#define TWO_ROW_ADDR_CYCLES 0x190
-#define TWO_ROW_ADDR_CYCLES__FLAG 0x0001
+#define TWO_ROW_ADDR_CYCLES__FLAG BIT(0)
#define MULTIPLANE_ADDR_RESTRICT 0x1a0
-#define MULTIPLANE_ADDR_RESTRICT__FLAG 0x0001
+#define MULTIPLANE_ADDR_RESTRICT__FLAG BIT(0)
#define ECC_CORRECTION 0x1b0
-#define ECC_CORRECTION__VALUE 0x001f
+#define ECC_CORRECTION__VALUE GENMASK(4, 0)
+#define ECC_CORRECTION__ERASE_THRESHOLD GENMASK(31, 16)
+#define MAKE_ECC_CORRECTION(val, thresh) \
+ (((val) & (ECC_CORRECTION__VALUE)) | \
+ (((thresh) << 16) & (ECC_CORRECTION__ERASE_THRESHOLD)))
#define READ_MODE 0x1c0
-#define READ_MODE__VALUE 0x000f
+#define READ_MODE__VALUE GENMASK(3, 0)
#define WRITE_MODE 0x1d0
-#define WRITE_MODE__VALUE 0x000f
+#define WRITE_MODE__VALUE GENMASK(3, 0)
#define COPYBACK_MODE 0x1e0
-#define COPYBACK_MODE__VALUE 0x000f
+#define COPYBACK_MODE__VALUE GENMASK(3, 0)
#define RDWR_EN_LO_CNT 0x1f0
-#define RDWR_EN_LO_CNT__VALUE 0x001f
+#define RDWR_EN_LO_CNT__VALUE GENMASK(4, 0)
#define RDWR_EN_HI_CNT 0x200
-#define RDWR_EN_HI_CNT__VALUE 0x001f
+#define RDWR_EN_HI_CNT__VALUE GENMASK(4, 0)
#define MAX_RD_DELAY 0x210
-#define MAX_RD_DELAY__VALUE 0x000f
+#define MAX_RD_DELAY__VALUE GENMASK(3, 0)
#define CS_SETUP_CNT 0x220
-#define CS_SETUP_CNT__VALUE 0x001f
+#define CS_SETUP_CNT__VALUE GENMASK(4, 0)
+#define CS_SETUP_CNT__TWB GENMASK(17, 12)
#define SPARE_AREA_SKIP_BYTES 0x230
-#define SPARE_AREA_SKIP_BYTES__VALUE 0x003f
+#define SPARE_AREA_SKIP_BYTES__VALUE GENMASK(5, 0)
#define SPARE_AREA_MARKER 0x240
-#define SPARE_AREA_MARKER__VALUE 0xffff
+#define SPARE_AREA_MARKER__VALUE GENMASK(15, 0)
#define DEVICES_CONNECTED 0x250
-#define DEVICES_CONNECTED__VALUE 0x0007
+#define DEVICES_CONNECTED__VALUE GENMASK(2, 0)
#define DIE_MASK 0x260
-#define DIE_MASK__VALUE 0x00ff
+#define DIE_MASK__VALUE GENMASK(7, 0)
#define FIRST_BLOCK_OF_NEXT_PLANE 0x270
-#define FIRST_BLOCK_OF_NEXT_PLANE__VALUE 0xffff
+#define FIRST_BLOCK_OF_NEXT_PLANE__VALUE GENMASK(15, 0)
#define WRITE_PROTECT 0x280
-#define WRITE_PROTECT__FLAG 0x0001
+#define WRITE_PROTECT__FLAG BIT(0)
#define RE_2_RE 0x290
-#define RE_2_RE__VALUE 0x003f
+#define RE_2_RE__VALUE GENMASK(5, 0)
#define MANUFACTURER_ID 0x300
-#define MANUFACTURER_ID__VALUE 0x00ff
+#define MANUFACTURER_ID__VALUE GENMASK(7, 0)
#define DEVICE_ID 0x310
-#define DEVICE_ID__VALUE 0x00ff
+#define DEVICE_ID__VALUE GENMASK(7, 0)
#define DEVICE_PARAM_0 0x320
-#define DEVICE_PARAM_0__VALUE 0x00ff
+#define DEVICE_PARAM_0__VALUE GENMASK(7, 0)
#define DEVICE_PARAM_1 0x330
-#define DEVICE_PARAM_1__VALUE 0x00ff
+#define DEVICE_PARAM_1__VALUE GENMASK(7, 0)
#define DEVICE_PARAM_2 0x340
-#define DEVICE_PARAM_2__VALUE 0x00ff
+#define DEVICE_PARAM_2__VALUE GENMASK(7, 0)
#define LOGICAL_PAGE_DATA_SIZE 0x350
-#define LOGICAL_PAGE_DATA_SIZE__VALUE 0xffff
+#define LOGICAL_PAGE_DATA_SIZE__VALUE GENMASK(15, 0)
#define LOGICAL_PAGE_SPARE_SIZE 0x360
-#define LOGICAL_PAGE_SPARE_SIZE__VALUE 0xffff
+#define LOGICAL_PAGE_SPARE_SIZE__VALUE GENMASK(15, 0)
#define REVISION 0x370
-#define REVISION__VALUE 0xffff
+#define REVISION__VALUE GENMASK(15, 0)
#define ONFI_DEVICE_FEATURES 0x380
-#define ONFI_DEVICE_FEATURES__VALUE 0x003f
+#define ONFI_DEVICE_FEATURES__VALUE GENMASK(5, 0)
#define ONFI_OPTIONAL_COMMANDS 0x390
-#define ONFI_OPTIONAL_COMMANDS__VALUE 0x003f
+#define ONFI_OPTIONAL_COMMANDS__VALUE GENMASK(5, 0)
#define ONFI_TIMING_MODE 0x3a0
-#define ONFI_TIMING_MODE__VALUE 0x003f
+#define ONFI_TIMING_MODE__VALUE GENMASK(5, 0)
#define ONFI_PGM_CACHE_TIMING_MODE 0x3b0
-#define ONFI_PGM_CACHE_TIMING_MODE__VALUE 0x003f
+#define ONFI_PGM_CACHE_TIMING_MODE__VALUE GENMASK(5, 0)
#define ONFI_DEVICE_NO_OF_LUNS 0x3c0
-#define ONFI_DEVICE_NO_OF_LUNS__NO_OF_LUNS 0x00ff
-#define ONFI_DEVICE_NO_OF_LUNS__ONFI_DEVICE 0x0100
+#define ONFI_DEVICE_NO_OF_LUNS__NO_OF_LUNS GENMASK(7, 0)
+#define ONFI_DEVICE_NO_OF_LUNS__ONFI_DEVICE BIT(8)
#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L 0x3d0
-#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L__VALUE 0xffff
+#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L__VALUE GENMASK(15, 0)
#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U 0x3e0
-#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U__VALUE 0xffff
+#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U__VALUE GENMASK(15, 0)
-#define FEATURES 0x3f0
-#define FEATURES__N_BANKS 0x0003
-#define FEATURES__ECC_MAX_ERR 0x003c
-#define FEATURES__DMA 0x0040
-#define FEATURES__CMD_DMA 0x0080
-#define FEATURES__PARTITION 0x0100
-#define FEATURES__XDMA_SIDEBAND 0x0200
-#define FEATURES__GPREG 0x0400
-#define FEATURES__INDEX_ADDR 0x0800
+#define FEATURES 0x3f0
+#define FEATURES__N_BANKS GENMASK(1, 0)
+#define FEATURES__ECC_MAX_ERR GENMASK(5, 2)
+#define FEATURES__DMA BIT(6)
+#define FEATURES__CMD_DMA BIT(7)
+#define FEATURES__PARTITION BIT(8)
+#define FEATURES__XDMA_SIDEBAND BIT(9)
+#define FEATURES__GPREG BIT(10)
+#define FEATURES__INDEX_ADDR BIT(11)
#define TRANSFER_MODE 0x400
-#define TRANSFER_MODE__VALUE 0x0003
+#define TRANSFER_MODE__VALUE GENMASK(1, 0)
-#define INTR_STATUS(__bank) (0x410 + ((__bank) * 0x50))
-#define INTR_EN(__bank) (0x420 + ((__bank) * 0x50))
+#define INTR_STATUS(bank) (0x410 + (bank) * 0x50)
+#define INTR_EN(bank) (0x420 + (bank) * 0x50)
/* bit[1:0] is used differently depending on IP version */
-#define INTR__ECC_UNCOR_ERR 0x0001 /* new IP */
-#define INTR__ECC_TRANSACTION_DONE 0x0001 /* old IP */
-#define INTR__ECC_ERR 0x0002 /* old IP */
-#define INTR__DMA_CMD_COMP 0x0004
-#define INTR__TIME_OUT 0x0008
-#define INTR__PROGRAM_FAIL 0x0010
-#define INTR__ERASE_FAIL 0x0020
-#define INTR__LOAD_COMP 0x0040
-#define INTR__PROGRAM_COMP 0x0080
-#define INTR__ERASE_COMP 0x0100
-#define INTR__PIPE_CPYBCK_CMD_COMP 0x0200
-#define INTR__LOCKED_BLK 0x0400
-#define INTR__UNSUP_CMD 0x0800
-#define INTR__INT_ACT 0x1000
-#define INTR__RST_COMP 0x2000
-#define INTR__PIPE_CMD_ERR 0x4000
-#define INTR__PAGE_XFER_INC 0x8000
+#define INTR__ECC_UNCOR_ERR BIT(0) /* new IP */
+#define INTR__ECC_TRANSACTION_DONE BIT(0) /* old IP */
+#define INTR__ECC_ERR BIT(1) /* old IP */
+#define INTR__DMA_CMD_COMP BIT(2)
+#define INTR__TIME_OUT BIT(3)
+#define INTR__PROGRAM_FAIL BIT(4)
+#define INTR__ERASE_FAIL BIT(5)
+#define INTR__LOAD_COMP BIT(6)
+#define INTR__PROGRAM_COMP BIT(7)
+#define INTR__ERASE_COMP BIT(8)
+#define INTR__PIPE_CPYBCK_CMD_COMP BIT(9)
+#define INTR__LOCKED_BLK BIT(10)
+#define INTR__UNSUP_CMD BIT(11)
+#define INTR__INT_ACT BIT(12)
+#define INTR__RST_COMP BIT(13)
+#define INTR__PIPE_CMD_ERR BIT(14)
+#define INTR__PAGE_XFER_INC BIT(15)
+#define INTR__ERASED_PAGE BIT(16)
-#define PAGE_CNT(__bank) (0x430 + ((__bank) * 0x50))
-#define ERR_PAGE_ADDR(__bank) (0x440 + ((__bank) * 0x50))
-#define ERR_BLOCK_ADDR(__bank) (0x450 + ((__bank) * 0x50))
+#define PAGE_CNT(bank) (0x430 + (bank) * 0x50)
+#define ERR_PAGE_ADDR(bank) (0x440 + (bank) * 0x50)
+#define ERR_BLOCK_ADDR(bank) (0x450 + (bank) * 0x50)
#define ECC_THRESHOLD 0x600
-#define ECC_THRESHOLD__VALUE 0x03ff
+#define ECC_THRESHOLD__VALUE GENMASK(9, 0)
#define ECC_ERROR_BLOCK_ADDRESS 0x610
-#define ECC_ERROR_BLOCK_ADDRESS__VALUE 0xffff
+#define ECC_ERROR_BLOCK_ADDRESS__VALUE GENMASK(15, 0)
#define ECC_ERROR_PAGE_ADDRESS 0x620
-#define ECC_ERROR_PAGE_ADDRESS__VALUE 0x0fff
-#define ECC_ERROR_PAGE_ADDRESS__BANK 0xf000
+#define ECC_ERROR_PAGE_ADDRESS__VALUE GENMASK(11, 0)
+#define ECC_ERROR_PAGE_ADDRESS__BANK GENMASK(15, 12)
#define ECC_ERROR_ADDRESS 0x630
-#define ECC_ERROR_ADDRESS__OFFSET 0x0fff
-#define ECC_ERROR_ADDRESS__SECTOR_NR 0xf000
+#define ECC_ERROR_ADDRESS__OFFSET GENMASK(11, 0)
+#define ECC_ERROR_ADDRESS__SECTOR_NR GENMASK(15, 12)
#define ERR_CORRECTION_INFO 0x640
-#define ERR_CORRECTION_INFO__BYTEMASK 0x00ff
-#define ERR_CORRECTION_INFO__DEVICE_NR 0x0f00
-#define ERR_CORRECTION_INFO__ERROR_TYPE 0x4000
-#define ERR_CORRECTION_INFO__LAST_ERR_INFO 0x8000
+#define ERR_CORRECTION_INFO__BYTEMASK GENMASK(7, 0)
+#define ERR_CORRECTION_INFO__DEVICE_NR GENMASK(11, 8)
+#define ERR_CORRECTION_INFO__ERROR_TYPE BIT(14)
+#define ERR_CORRECTION_INFO__LAST_ERR_INFO BIT(15)
#define ECC_COR_INFO(bank) (0x650 + (bank) / 2 * 0x10)
#define ECC_COR_INFO__SHIFT(bank) ((bank) % 2 * 8)
-#define ECC_COR_INFO__MAX_ERRORS 0x007f
-#define ECC_COR_INFO__UNCOR_ERR 0x0080
+#define ECC_COR_INFO__MAX_ERRORS GENMASK(6, 0)
+#define ECC_COR_INFO__UNCOR_ERR BIT(7)
+
+#define CFG_DATA_BLOCK_SIZE 0x6b0
+
+#define CFG_LAST_DATA_BLOCK_SIZE 0x6c0
+
+#define CFG_NUM_DATA_BLOCKS 0x6d0
+
+#define CFG_META_DATA_SIZE 0x6e0
#define DMA_ENABLE 0x700
-#define DMA_ENABLE__FLAG 0x0001
+#define DMA_ENABLE__FLAG BIT(0)
#define IGNORE_ECC_DONE 0x710
-#define IGNORE_ECC_DONE__FLAG 0x0001
+#define IGNORE_ECC_DONE__FLAG BIT(0)
#define DMA_INTR 0x720
#define DMA_INTR_EN 0x730
-#define DMA_INTR__TARGET_ERROR 0x0001
-#define DMA_INTR__DESC_COMP_CHANNEL0 0x0002
-#define DMA_INTR__DESC_COMP_CHANNEL1 0x0004
-#define DMA_INTR__DESC_COMP_CHANNEL2 0x0008
-#define DMA_INTR__DESC_COMP_CHANNEL3 0x0010
-#define DMA_INTR__MEMCOPY_DESC_COMP 0x0020
+#define DMA_INTR__TARGET_ERROR BIT(0)
+#define DMA_INTR__DESC_COMP_CHANNEL0 BIT(1)
+#define DMA_INTR__DESC_COMP_CHANNEL1 BIT(2)
+#define DMA_INTR__DESC_COMP_CHANNEL2 BIT(3)
+#define DMA_INTR__DESC_COMP_CHANNEL3 BIT(4)
+#define DMA_INTR__MEMCOPY_DESC_COMP BIT(5)
#define TARGET_ERR_ADDR_LO 0x740
-#define TARGET_ERR_ADDR_LO__VALUE 0xffff
+#define TARGET_ERR_ADDR_LO__VALUE GENMASK(15, 0)
#define TARGET_ERR_ADDR_HI 0x750
-#define TARGET_ERR_ADDR_HI__VALUE 0xffff
+#define TARGET_ERR_ADDR_HI__VALUE GENMASK(15, 0)
#define CHNL_ACTIVE 0x760
-#define CHNL_ACTIVE__CHANNEL0 0x0001
-#define CHNL_ACTIVE__CHANNEL1 0x0002
-#define CHNL_ACTIVE__CHANNEL2 0x0004
-#define CHNL_ACTIVE__CHANNEL3 0x0008
-
-#define FAIL 1 /*failed flag*/
-#define PASS 0 /*success flag*/
-
-#define CLK_X 5
-#define CLK_MULTI 4
-
-#define ONFI_BLOOM_TIME 1
-#define MODE5_WORKAROUND 0
-
-
-#define MODE_00 0x00000000
-#define MODE_01 0x04000000
-#define MODE_10 0x08000000
-#define MODE_11 0x0C000000
-
-#define ECC_SECTOR_SIZE 512
-
-struct nand_buf {
- int head;
- int tail;
- uint8_t *buf;
- dma_addr_t dma_buf;
-};
-
-#define INTEL_CE4100 1
-#define INTEL_MRST 2
-#define DT 3
+#define CHNL_ACTIVE__CHANNEL0 BIT(0)
+#define CHNL_ACTIVE__CHANNEL1 BIT(1)
+#define CHNL_ACTIVE__CHANNEL2 BIT(2)
+#define CHNL_ACTIVE__CHANNEL3 BIT(3)
struct denali_nand_info {
struct nand_chip nand;
- int flash_bank; /* currently selected chip */
- int status;
- int platform;
- struct nand_buf buf;
+ unsigned long clk_x_rate; /* bus interface clock rate */
+ int active_bank; /* currently selected bank */
struct device *dev;
- int total_used_banks;
- int page;
- void __iomem *flash_reg; /* Register Interface */
- void __iomem *flash_mem; /* Host Data/Command Interface */
+ void __iomem *reg; /* Register Interface */
+ void __iomem *host; /* Host Data/Command Interface */
/* elements used by ISR */
struct completion complete;
spinlock_t irq_lock;
+ uint32_t irq_mask;
uint32_t irq_status;
int irq;
- int devnum; /* represent how many nands connected */
- int bbtskipbytes;
+ void *buf;
+ dma_addr_t dma_addr;
+ int dma_avail;
+ int devs_per_cs; /* devices connected in parallel */
+ int oob_skip_bytes;
int max_banks;
unsigned int revision;
unsigned int caps;
+ const struct nand_ecc_caps *ecc_caps;
};
#define DENALI_CAP_HW_ECC_FIXUP BIT(0)
#define DENALI_CAP_DMA_64BIT BIT(1)
+int denali_calc_ecc_bytes(int step_size, int strength);
extern int denali_init(struct denali_nand_info *denali);
extern void denali_remove(struct denali_nand_info *denali);
diff --git a/drivers/mtd/nand/denali_dt.c b/drivers/mtd/nand/denali_dt.c
index df9ef36..47f398e 100644
--- a/drivers/mtd/nand/denali_dt.c
+++ b/drivers/mtd/nand/denali_dt.c
@@ -32,10 +32,31 @@
struct denali_dt_data {
unsigned int revision;
unsigned int caps;
+ const struct nand_ecc_caps *ecc_caps;
};
+NAND_ECC_CAPS_SINGLE(denali_socfpga_ecc_caps, denali_calc_ecc_bytes,
+ 512, 8, 15);
static const struct denali_dt_data denali_socfpga_data = {
.caps = DENALI_CAP_HW_ECC_FIXUP,
+ .ecc_caps = &denali_socfpga_ecc_caps,
+};
+
+NAND_ECC_CAPS_SINGLE(denali_uniphier_v5a_ecc_caps, denali_calc_ecc_bytes,
+ 1024, 8, 16, 24);
+static const struct denali_dt_data denali_uniphier_v5a_data = {
+ .caps = DENALI_CAP_HW_ECC_FIXUP |
+ DENALI_CAP_DMA_64BIT,
+ .ecc_caps = &denali_uniphier_v5a_ecc_caps,
+};
+
+NAND_ECC_CAPS_SINGLE(denali_uniphier_v5b_ecc_caps, denali_calc_ecc_bytes,
+ 1024, 8, 16);
+static const struct denali_dt_data denali_uniphier_v5b_data = {
+ .revision = 0x0501,
+ .caps = DENALI_CAP_HW_ECC_FIXUP |
+ DENALI_CAP_DMA_64BIT,
+ .ecc_caps = &denali_uniphier_v5b_ecc_caps,
};
static const struct of_device_id denali_nand_dt_ids[] = {
@@ -43,13 +64,21 @@
.compatible = "altr,socfpga-denali-nand",
.data = &denali_socfpga_data,
},
+ {
+ .compatible = "socionext,uniphier-denali-nand-v5a",
+ .data = &denali_uniphier_v5a_data,
+ },
+ {
+ .compatible = "socionext,uniphier-denali-nand-v5b",
+ .data = &denali_uniphier_v5b_data,
+ },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, denali_nand_dt_ids);
static int denali_dt_probe(struct platform_device *pdev)
{
- struct resource *denali_reg, *nand_data;
+ struct resource *res;
struct denali_dt *dt;
const struct denali_dt_data *data;
struct denali_nand_info *denali;
@@ -64,9 +93,9 @@
if (data) {
denali->revision = data->revision;
denali->caps = data->caps;
+ denali->ecc_caps = data->ecc_caps;
}
- denali->platform = DT;
denali->dev = &pdev->dev;
denali->irq = platform_get_irq(pdev, 0);
if (denali->irq < 0) {
@@ -74,17 +103,15 @@
return denali->irq;
}
- denali_reg = platform_get_resource_byname(pdev, IORESOURCE_MEM,
- "denali_reg");
- denali->flash_reg = devm_ioremap_resource(&pdev->dev, denali_reg);
- if (IS_ERR(denali->flash_reg))
- return PTR_ERR(denali->flash_reg);
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "denali_reg");
+ denali->reg = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(denali->reg))
+ return PTR_ERR(denali->reg);
- nand_data = platform_get_resource_byname(pdev, IORESOURCE_MEM,
- "nand_data");
- denali->flash_mem = devm_ioremap_resource(&pdev->dev, nand_data);
- if (IS_ERR(denali->flash_mem))
- return PTR_ERR(denali->flash_mem);
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_data");
+ denali->host = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(denali->host))
+ return PTR_ERR(denali->host);
dt->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(dt->clk)) {
@@ -93,6 +120,8 @@
}
clk_prepare_enable(dt->clk);
+ denali->clk_x_rate = clk_get_rate(dt->clk);
+
ret = denali_init(denali);
if (ret)
goto out_disable_clk;
diff --git a/drivers/mtd/nand/denali_pci.c b/drivers/mtd/nand/denali_pci.c
index ac84323..81370c7 100644
--- a/drivers/mtd/nand/denali_pci.c
+++ b/drivers/mtd/nand/denali_pci.c
@@ -19,6 +19,9 @@
#define DENALI_NAND_NAME "denali-nand-pci"
+#define INTEL_CE4100 1
+#define INTEL_MRST 2
+
/* List of platforms this NAND controller has be integrated into */
static const struct pci_device_id denali_pci_ids[] = {
{ PCI_VDEVICE(INTEL, 0x0701), INTEL_CE4100 },
@@ -27,6 +30,8 @@
};
MODULE_DEVICE_TABLE(pci, denali_pci_ids);
+NAND_ECC_CAPS_SINGLE(denali_pci_ecc_caps, denali_calc_ecc_bytes, 512, 8, 15);
+
static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
int ret;
@@ -45,13 +50,11 @@
}
if (id->driver_data == INTEL_CE4100) {
- denali->platform = INTEL_CE4100;
mem_base = pci_resource_start(dev, 0);
mem_len = pci_resource_len(dev, 1);
csr_base = pci_resource_start(dev, 1);
csr_len = pci_resource_len(dev, 1);
} else {
- denali->platform = INTEL_MRST;
csr_base = pci_resource_start(dev, 0);
csr_len = pci_resource_len(dev, 0);
mem_base = pci_resource_start(dev, 1);
@@ -65,6 +68,9 @@
pci_set_master(dev);
denali->dev = &dev->dev;
denali->irq = dev->irq;
+ denali->ecc_caps = &denali_pci_ecc_caps;
+ denali->nand.ecc.options |= NAND_ECC_MAXIMIZE;
+ denali->clk_x_rate = 200000000; /* 200 MHz */
ret = pci_request_regions(dev, DENALI_NAND_NAME);
if (ret) {
@@ -72,14 +78,14 @@
return ret;
}
- denali->flash_reg = ioremap_nocache(csr_base, csr_len);
- if (!denali->flash_reg) {
+ denali->reg = ioremap_nocache(csr_base, csr_len);
+ if (!denali->reg) {
dev_err(&dev->dev, "Spectra: Unable to remap memory region\n");
return -ENOMEM;
}
- denali->flash_mem = ioremap_nocache(mem_base, mem_len);
- if (!denali->flash_mem) {
+ denali->host = ioremap_nocache(mem_base, mem_len);
+ if (!denali->host) {
dev_err(&dev->dev, "Spectra: ioremap_nocache failed!");
ret = -ENOMEM;
goto failed_remap_reg;
@@ -94,9 +100,9 @@
return 0;
failed_remap_mem:
- iounmap(denali->flash_mem);
+ iounmap(denali->host);
failed_remap_reg:
- iounmap(denali->flash_reg);
+ iounmap(denali->reg);
return ret;
}
@@ -106,8 +112,8 @@
struct denali_nand_info *denali = pci_get_drvdata(dev);
denali_remove(denali);
- iounmap(denali->flash_reg);
- iounmap(denali->flash_mem);
+ iounmap(denali->reg);
+ iounmap(denali->host);
}
static struct pci_driver denali_pci_driver = {
diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c
index 7af2a3c..a27a84f 100644
--- a/drivers/mtd/nand/docg4.c
+++ b/drivers/mtd/nand/docg4.c
@@ -1260,6 +1260,8 @@
nand->read_buf = docg4_read_buf;
nand->write_buf = docg4_write_buf16;
nand->erase = docg4_erase_block;
+ nand->onfi_set_features = nand_onfi_get_set_features_notsupp;
+ nand->onfi_get_features = nand_onfi_get_set_features_notsupp;
nand->ecc.read_page = docg4_read_page;
nand->ecc.write_page = docg4_write_page;
nand->ecc.read_page_raw = docg4_read_page_raw;
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 113f76e..b9ac16f 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -775,6 +775,8 @@
chip->select_chip = fsl_elbc_select_chip;
chip->cmdfunc = fsl_elbc_cmdfunc;
chip->waitfunc = fsl_elbc_wait;
+ chip->onfi_set_features = nand_onfi_get_set_features_notsupp;
+ chip->onfi_get_features = nand_onfi_get_set_features_notsupp;
chip->bbt_td = &bbt_main_descr;
chip->bbt_md = &bbt_mirror_descr;
diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
index d1570f5..59408ec 100644
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -171,34 +171,6 @@
ifc_nand_ctrl->index += mtd->writesize;
}
-static int is_blank(struct mtd_info *mtd, unsigned int bufnum)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- struct fsl_ifc_mtd *priv = nand_get_controller_data(chip);
- u8 __iomem *addr = priv->vbase + bufnum * (mtd->writesize * 2);
- u32 __iomem *mainarea = (u32 __iomem *)addr;
- u8 __iomem *oob = addr + mtd->writesize;
- struct mtd_oob_region oobregion = { };
- int i, section = 0;
-
- for (i = 0; i < mtd->writesize / 4; i++) {
- if (__raw_readl(&mainarea[i]) != 0xffffffff)
- return 0;
- }
-
- mtd_ooblayout_ecc(mtd, section++, &oobregion);
- while (oobregion.length) {
- for (i = 0; i < oobregion.length; i++) {
- if (__raw_readb(&oob[oobregion.offset + i]) != 0xff)
- return 0;
- }
-
- mtd_ooblayout_ecc(mtd, section++, &oobregion);
- }
-
- return 1;
-}
-
/* returns nonzero if entire page is blank */
static int check_read_ecc(struct mtd_info *mtd, struct fsl_ifc_ctrl *ctrl,
u32 *eccstat, unsigned int bufnum)
@@ -274,16 +246,14 @@
if (errors == 15) {
/*
* Uncorrectable error.
- * OK only if the whole page is blank.
+ * We'll check for blank pages later.
*
* We disable ECCER reporting due to...
* erratum IFC-A002770 -- so report it now if we
* see an uncorrectable error in ECCSTAT.
*/
- if (!is_blank(mtd, bufnum))
- ctrl->nand_stat |=
- IFC_NAND_EVTER_STAT_ECCER;
- break;
+ ctrl->nand_stat |= IFC_NAND_EVTER_STAT_ECCER;
+ continue;
}
mtd->ecc_stats.corrected += errors;
@@ -678,6 +648,39 @@
return nand_fsr | NAND_STATUS_WP;
}
+/*
+ * The controller does not check for bitflips in erased pages,
+ * therefore software must check instead.
+ */
+static int check_erased_page(struct nand_chip *chip, u8 *buf)
+{
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ u8 *ecc = chip->oob_poi;
+ const int ecc_size = chip->ecc.bytes;
+ const int pkt_size = chip->ecc.size;
+ int i, res, bitflips = 0;
+ struct mtd_oob_region oobregion = { };
+
+ mtd_ooblayout_ecc(mtd, 0, &oobregion);
+ ecc += oobregion.offset;
+
+ for (i = 0; i < chip->ecc.steps; ++i) {
+ res = nand_check_erased_ecc_chunk(buf, pkt_size, ecc, ecc_size,
+ NULL, 0,
+ chip->ecc.strength);
+ if (res < 0)
+ mtd->ecc_stats.failed++;
+ else
+ mtd->ecc_stats.corrected += res;
+
+ bitflips = max(res, bitflips);
+ buf += pkt_size;
+ ecc += ecc_size;
+ }
+
+ return bitflips;
+}
+
static int fsl_ifc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int oob_required, int page)
{
@@ -689,8 +692,12 @@
if (oob_required)
fsl_ifc_read_buf(mtd, chip->oob_poi, mtd->oobsize);
- if (ctrl->nand_stat & IFC_NAND_EVTER_STAT_ECCER)
- dev_err(priv->dev, "NAND Flash ECC Uncorrectable Error\n");
+ if (ctrl->nand_stat & IFC_NAND_EVTER_STAT_ECCER) {
+ if (!oob_required)
+ fsl_ifc_read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ return check_erased_page(chip, buf);
+ }
if (ctrl->nand_stat != IFC_NAND_EVTER_STAT_OPC)
mtd->ecc_stats.failed++;
@@ -831,6 +838,8 @@
chip->select_chip = fsl_ifc_select_chip;
chip->cmdfunc = fsl_ifc_cmdfunc;
chip->waitfunc = fsl_ifc_wait;
+ chip->onfi_set_features = nand_onfi_get_set_features_notsupp;
+ chip->onfi_get_features = nand_onfi_get_set_features_notsupp;
chip->bbt_td = &bbt_main_descr;
chip->bbt_md = &bbt_mirror_descr;
@@ -904,7 +913,7 @@
chip->ecc.algo = NAND_ECC_HAMMING;
}
- if (ctrl->version == FSL_IFC_VERSION_1_1_0)
+ if (ctrl->version >= FSL_IFC_VERSION_1_1_0)
fsl_ifc_sram_init(priv);
return 0;
diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c
index cea50d2..9d8b051 100644
--- a/drivers/mtd/nand/fsmc_nand.c
+++ b/drivers/mtd/nand/fsmc_nand.c
@@ -302,25 +302,13 @@
* This routine initializes timing parameters related to NAND memory access in
* FSMC registers
*/
-static void fsmc_nand_setup(void __iomem *regs, uint32_t bank,
- uint32_t busw, struct fsmc_nand_timings *timings)
+static void fsmc_nand_setup(struct fsmc_nand_data *host,
+ struct fsmc_nand_timings *tims)
{
uint32_t value = FSMC_DEVTYPE_NAND | FSMC_ENABLE | FSMC_WAITON;
uint32_t tclr, tar, thiz, thold, twait, tset;
- struct fsmc_nand_timings *tims;
- struct fsmc_nand_timings default_timings = {
- .tclr = FSMC_TCLR_1,
- .tar = FSMC_TAR_1,
- .thiz = FSMC_THIZ_1,
- .thold = FSMC_THOLD_4,
- .twait = FSMC_TWAIT_6,
- .tset = FSMC_TSET_0,
- };
-
- if (timings)
- tims = timings;
- else
- tims = &default_timings;
+ unsigned int bank = host->bank;
+ void __iomem *regs = host->regs_va;
tclr = (tims->tclr & FSMC_TCLR_MASK) << FSMC_TCLR_SHIFT;
tar = (tims->tar & FSMC_TAR_MASK) << FSMC_TAR_SHIFT;
@@ -329,7 +317,7 @@
twait = (tims->twait & FSMC_TWAIT_MASK) << FSMC_TWAIT_SHIFT;
tset = (tims->tset & FSMC_TSET_MASK) << FSMC_TSET_SHIFT;
- if (busw)
+ if (host->nand.options & NAND_BUSWIDTH_16)
writel_relaxed(value | FSMC_DEVWID_16,
FSMC_NAND_REG(regs, bank, PC));
else
@@ -344,6 +332,87 @@
FSMC_NAND_REG(regs, bank, ATTRIB));
}
+static int fsmc_calc_timings(struct fsmc_nand_data *host,
+ const struct nand_sdr_timings *sdrt,
+ struct fsmc_nand_timings *tims)
+{
+ unsigned long hclk = clk_get_rate(host->clk);
+ unsigned long hclkn = NSEC_PER_SEC / hclk;
+ uint32_t thiz, thold, twait, tset;
+
+ if (sdrt->tRC_min < 30000)
+ return -EOPNOTSUPP;
+
+ tims->tar = DIV_ROUND_UP(sdrt->tAR_min / 1000, hclkn) - 1;
+ if (tims->tar > FSMC_TAR_MASK)
+ tims->tar = FSMC_TAR_MASK;
+ tims->tclr = DIV_ROUND_UP(sdrt->tCLR_min / 1000, hclkn) - 1;
+ if (tims->tclr > FSMC_TCLR_MASK)
+ tims->tclr = FSMC_TCLR_MASK;
+
+ thiz = sdrt->tCS_min - sdrt->tWP_min;
+ tims->thiz = DIV_ROUND_UP(thiz / 1000, hclkn);
+
+ thold = sdrt->tDH_min;
+ if (thold < sdrt->tCH_min)
+ thold = sdrt->tCH_min;
+ if (thold < sdrt->tCLH_min)
+ thold = sdrt->tCLH_min;
+ if (thold < sdrt->tWH_min)
+ thold = sdrt->tWH_min;
+ if (thold < sdrt->tALH_min)
+ thold = sdrt->tALH_min;
+ if (thold < sdrt->tREH_min)
+ thold = sdrt->tREH_min;
+ tims->thold = DIV_ROUND_UP(thold / 1000, hclkn);
+ if (tims->thold == 0)
+ tims->thold = 1;
+ else if (tims->thold > FSMC_THOLD_MASK)
+ tims->thold = FSMC_THOLD_MASK;
+
+ twait = max(sdrt->tRP_min, sdrt->tWP_min);
+ tims->twait = DIV_ROUND_UP(twait / 1000, hclkn) - 1;
+ if (tims->twait == 0)
+ tims->twait = 1;
+ else if (tims->twait > FSMC_TWAIT_MASK)
+ tims->twait = FSMC_TWAIT_MASK;
+
+ tset = max(sdrt->tCS_min - sdrt->tWP_min,
+ sdrt->tCEA_max - sdrt->tREA_max);
+ tims->tset = DIV_ROUND_UP(tset / 1000, hclkn) - 1;
+ if (tims->tset == 0)
+ tims->tset = 1;
+ else if (tims->tset > FSMC_TSET_MASK)
+ tims->tset = FSMC_TSET_MASK;
+
+ return 0;
+}
+
+static int fsmc_setup_data_interface(struct mtd_info *mtd, int csline,
+ const struct nand_data_interface *conf)
+{
+ struct nand_chip *nand = mtd_to_nand(mtd);
+ struct fsmc_nand_data *host = nand_get_controller_data(nand);
+ struct fsmc_nand_timings tims;
+ const struct nand_sdr_timings *sdrt;
+ int ret;
+
+ sdrt = nand_get_sdr_timings(conf);
+ if (IS_ERR(sdrt))
+ return PTR_ERR(sdrt);
+
+ ret = fsmc_calc_timings(host, sdrt, &tims);
+ if (ret)
+ return ret;
+
+ if (csline == NAND_DATA_IFACE_CHECK_ONLY)
+ return 0;
+
+ fsmc_nand_setup(host, &tims);
+
+ return 0;
+}
+
/*
* fsmc_enable_hwecc - Enables Hardware ECC through FSMC registers
*/
@@ -796,10 +865,8 @@
return -ENOMEM;
ret = of_property_read_u8_array(np, "timings", (u8 *)host->dev_timings,
sizeof(*host->dev_timings));
- if (ret) {
- dev_info(&pdev->dev, "No timings in dts specified, using default timings!\n");
+ if (ret)
host->dev_timings = NULL;
- }
/* Set default NAND bank to 0 */
host->bank = 0;
@@ -933,9 +1000,10 @@
break;
}
- fsmc_nand_setup(host->regs_va, host->bank,
- nand->options & NAND_BUSWIDTH_16,
- host->dev_timings);
+ if (host->dev_timings)
+ fsmc_nand_setup(host, host->dev_timings);
+ else
+ nand->setup_data_interface = fsmc_setup_data_interface;
if (AMBA_REV_BITS(host->pid) >= 8) {
nand->ecc.read_page = fsmc_read_page_hwecc;
@@ -986,6 +1054,9 @@
break;
}
+ case NAND_ECC_ON_DIE:
+ break;
+
default:
dev_err(&pdev->dev, "Unsupported ECC mode!\n");
goto err_probe;
@@ -1073,9 +1144,8 @@
struct fsmc_nand_data *host = dev_get_drvdata(dev);
if (host) {
clk_prepare_enable(host->clk);
- fsmc_nand_setup(host->regs_va, host->bank,
- host->nand.options & NAND_BUSWIDTH_16,
- host->dev_timings);
+ if (host->dev_timings)
+ fsmc_nand_setup(host, host->dev_timings);
}
return 0;
}
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
index 141bd70..9778724 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
@@ -26,7 +26,7 @@
#include "gpmi-regs.h"
#include "bch-regs.h"
-static struct timing_threshod timing_default_threshold = {
+static struct timing_threshold timing_default_threshold = {
.max_data_setup_cycles = (BM_GPMI_TIMING0_DATA_SETUP >>
BP_GPMI_TIMING0_DATA_SETUP),
.internal_data_setup_in_ns = 0,
@@ -329,7 +329,7 @@
static int gpmi_nfc_compute_hardware_timing(struct gpmi_nand_data *this,
struct gpmi_nfc_hardware_timing *hw)
{
- struct timing_threshod *nfc = &timing_default_threshold;
+ struct timing_threshold *nfc = &timing_default_threshold;
struct resources *r = &this->resources;
struct nand_chip *nand = &this->nand;
struct nand_timing target = this->timing;
@@ -932,7 +932,7 @@
nand->select_chip(mtd, 0);
- /* [1] send SET FEATURE commond to NAND */
+ /* [1] send SET FEATURE command to NAND */
feature[0] = mode;
ret = nand->onfi_set_features(mtd, nand,
ONFI_FEATURE_ADDR_TIMING_MODE, feature);
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index d521396..50f8d4a 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -82,6 +82,10 @@
return 0;
}
+static const char * const gpmi_clks_for_mx2x[] = {
+ "gpmi_io",
+};
+
static const struct mtd_ooblayout_ops gpmi_ooblayout_ops = {
.ecc = gpmi_ooblayout_ecc,
.free = gpmi_ooblayout_free,
@@ -91,24 +95,48 @@
.type = IS_MX23,
.bch_max_ecc_strength = 20,
.max_chain_delay = 16,
+ .clks = gpmi_clks_for_mx2x,
+ .clks_count = ARRAY_SIZE(gpmi_clks_for_mx2x),
};
static const struct gpmi_devdata gpmi_devdata_imx28 = {
.type = IS_MX28,
.bch_max_ecc_strength = 20,
.max_chain_delay = 16,
+ .clks = gpmi_clks_for_mx2x,
+ .clks_count = ARRAY_SIZE(gpmi_clks_for_mx2x),
+};
+
+static const char * const gpmi_clks_for_mx6[] = {
+ "gpmi_io", "gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch",
};
static const struct gpmi_devdata gpmi_devdata_imx6q = {
.type = IS_MX6Q,
.bch_max_ecc_strength = 40,
.max_chain_delay = 12,
+ .clks = gpmi_clks_for_mx6,
+ .clks_count = ARRAY_SIZE(gpmi_clks_for_mx6),
};
static const struct gpmi_devdata gpmi_devdata_imx6sx = {
.type = IS_MX6SX,
.bch_max_ecc_strength = 62,
.max_chain_delay = 12,
+ .clks = gpmi_clks_for_mx6,
+ .clks_count = ARRAY_SIZE(gpmi_clks_for_mx6),
+};
+
+static const char * const gpmi_clks_for_mx7d[] = {
+ "gpmi_io", "gpmi_bch_apb",
+};
+
+static const struct gpmi_devdata gpmi_devdata_imx7d = {
+ .type = IS_MX7D,
+ .bch_max_ecc_strength = 62,
+ .max_chain_delay = 12,
+ .clks = gpmi_clks_for_mx7d,
+ .clks_count = ARRAY_SIZE(gpmi_clks_for_mx7d),
};
static irqreturn_t bch_irq(int irq, void *cookie)
@@ -599,35 +627,14 @@
return -EINVAL;
}
-static char *extra_clks_for_mx6q[GPMI_CLK_MAX] = {
- "gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch",
-};
-
static int gpmi_get_clks(struct gpmi_nand_data *this)
{
struct resources *r = &this->resources;
- char **extra_clks = NULL;
struct clk *clk;
int err, i;
- /* The main clock is stored in the first. */
- r->clock[0] = devm_clk_get(this->dev, "gpmi_io");
- if (IS_ERR(r->clock[0])) {
- err = PTR_ERR(r->clock[0]);
- goto err_clock;
- }
-
- /* Get extra clocks */
- if (GPMI_IS_MX6(this))
- extra_clks = extra_clks_for_mx6q;
- if (!extra_clks)
- return 0;
-
- for (i = 1; i < GPMI_CLK_MAX; i++) {
- if (extra_clks[i - 1] == NULL)
- break;
-
- clk = devm_clk_get(this->dev, extra_clks[i - 1]);
+ for (i = 0; i < this->devdata->clks_count; i++) {
+ clk = devm_clk_get(this->dev, this->devdata->clks[i]);
if (IS_ERR(clk)) {
err = PTR_ERR(clk);
goto err_clock;
@@ -1929,12 +1936,6 @@
return gpmi_alloc_dma_buffer(this);
}
-static void gpmi_nand_exit(struct gpmi_nand_data *this)
-{
- nand_release(nand_to_mtd(&this->nand));
- gpmi_free_dma_buffer(this);
-}
-
static int gpmi_init_last(struct gpmi_nand_data *this)
{
struct nand_chip *chip = &this->nand;
@@ -2048,18 +2049,20 @@
ret = nand_boot_init(this);
if (ret)
- goto err_out;
+ goto err_nand_cleanup;
ret = chip->scan_bbt(mtd);
if (ret)
- goto err_out;
+ goto err_nand_cleanup;
ret = mtd_device_register(mtd, NULL, 0);
if (ret)
- goto err_out;
+ goto err_nand_cleanup;
return 0;
+err_nand_cleanup:
+ nand_cleanup(chip);
err_out:
- gpmi_nand_exit(this);
+ gpmi_free_dma_buffer(this);
return ret;
}
@@ -2076,6 +2079,9 @@
}, {
.compatible = "fsl,imx6sx-gpmi-nand",
.data = &gpmi_devdata_imx6sx,
+ }, {
+ .compatible = "fsl,imx7d-gpmi-nand",
+ .data = &gpmi_devdata_imx7d,
}, {}
};
MODULE_DEVICE_TABLE(of, gpmi_nand_id_table);
@@ -2129,7 +2135,8 @@
{
struct gpmi_nand_data *this = platform_get_drvdata(pdev);
- gpmi_nand_exit(this);
+ nand_release(nand_to_mtd(&this->nand));
+ gpmi_free_dma_buffer(this);
release_resources(this);
return 0;
}
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
index 4e49a1f..9df0ad6 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
@@ -123,13 +123,16 @@
IS_MX23,
IS_MX28,
IS_MX6Q,
- IS_MX6SX
+ IS_MX6SX,
+ IS_MX7D,
};
struct gpmi_devdata {
enum gpmi_type type;
int bch_max_ecc_strength;
int max_chain_delay; /* See the async EDO mode */
+ const char * const *clks;
+ const int clks_count;
};
struct gpmi_nand_data {
@@ -231,7 +234,7 @@
};
/**
- * struct timing_threshod - Timing threshold
+ * struct timing_threshold - Timing threshold
* @max_data_setup_cycles: The maximum number of data setup cycles that
* can be expressed in the hardware.
* @internal_data_setup_in_ns: The time, in ns, that the NFC hardware requires
@@ -253,7 +256,7 @@
* progress, this is the clock frequency during
* the most recent I/O transaction.
*/
-struct timing_threshod {
+struct timing_threshold {
const unsigned int max_chip_count;
const unsigned int max_data_setup_cycles;
const unsigned int internal_data_setup_in_ns;
@@ -305,6 +308,8 @@
#define GPMI_IS_MX28(x) ((x)->devdata->type == IS_MX28)
#define GPMI_IS_MX6Q(x) ((x)->devdata->type == IS_MX6Q)
#define GPMI_IS_MX6SX(x) ((x)->devdata->type == IS_MX6SX)
+#define GPMI_IS_MX7D(x) ((x)->devdata->type == IS_MX7D)
-#define GPMI_IS_MX6(x) (GPMI_IS_MX6Q(x) || GPMI_IS_MX6SX(x))
+#define GPMI_IS_MX6(x) (GPMI_IS_MX6Q(x) || GPMI_IS_MX6SX(x) || \
+ GPMI_IS_MX7D(x))
#endif
diff --git a/drivers/mtd/nand/hisi504_nand.c b/drivers/mtd/nand/hisi504_nand.c
index e40364e..530caa8 100644
--- a/drivers/mtd/nand/hisi504_nand.c
+++ b/drivers/mtd/nand/hisi504_nand.c
@@ -764,6 +764,8 @@
chip->write_buf = hisi_nfc_write_buf;
chip->read_buf = hisi_nfc_read_buf;
chip->chip_delay = HINFC504_CHIP_DELAY;
+ chip->onfi_set_features = nand_onfi_get_set_features_notsupp;
+ chip->onfi_get_features = nand_onfi_get_set_features_notsupp;
hisi_nfc_host_init(host);
diff --git a/drivers/mtd/nand/jz4780_nand.c b/drivers/mtd/nand/jz4780_nand.c
index a39bb70..8bc835f 100644
--- a/drivers/mtd/nand/jz4780_nand.c
+++ b/drivers/mtd/nand/jz4780_nand.c
@@ -205,7 +205,7 @@
return -EINVAL;
}
- mtd->ooblayout = &nand_ooblayout_lp_ops;
+ mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
return 0;
}
diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c
index 6d6eaed..0e86fb6 100644
--- a/drivers/mtd/nand/mpc5121_nfc.c
+++ b/drivers/mtd/nand/mpc5121_nfc.c
@@ -708,6 +708,8 @@
chip->read_buf = mpc5121_nfc_read_buf;
chip->write_buf = mpc5121_nfc_write_buf;
chip->select_chip = mpc5121_nfc_select_chip;
+ chip->onfi_set_features = nand_onfi_get_set_features_notsupp;
+ chip->onfi_get_features = nand_onfi_get_set_features_notsupp;
chip->bbt_options = NAND_BBT_USE_FLASH;
chip->ecc.mode = NAND_ECC_SOFT;
chip->ecc.algo = NAND_ECC_HAMMING;
diff --git a/drivers/mtd/nand/mtk_ecc.c b/drivers/mtd/nand/mtk_ecc.c
index dbf2562..6c3a4aa 100644
--- a/drivers/mtd/nand/mtk_ecc.c
+++ b/drivers/mtd/nand/mtk_ecc.c
@@ -28,36 +28,16 @@
#define ECC_IDLE_MASK BIT(0)
#define ECC_IRQ_EN BIT(0)
+#define ECC_PG_IRQ_SEL BIT(1)
#define ECC_OP_ENABLE (1)
#define ECC_OP_DISABLE (0)
#define ECC_ENCCON (0x00)
#define ECC_ENCCNFG (0x04)
-#define ECC_CNFG_4BIT (0)
-#define ECC_CNFG_6BIT (1)
-#define ECC_CNFG_8BIT (2)
-#define ECC_CNFG_10BIT (3)
-#define ECC_CNFG_12BIT (4)
-#define ECC_CNFG_14BIT (5)
-#define ECC_CNFG_16BIT (6)
-#define ECC_CNFG_18BIT (7)
-#define ECC_CNFG_20BIT (8)
-#define ECC_CNFG_22BIT (9)
-#define ECC_CNFG_24BIT (0xa)
-#define ECC_CNFG_28BIT (0xb)
-#define ECC_CNFG_32BIT (0xc)
-#define ECC_CNFG_36BIT (0xd)
-#define ECC_CNFG_40BIT (0xe)
-#define ECC_CNFG_44BIT (0xf)
-#define ECC_CNFG_48BIT (0x10)
-#define ECC_CNFG_52BIT (0x11)
-#define ECC_CNFG_56BIT (0x12)
-#define ECC_CNFG_60BIT (0x13)
#define ECC_MODE_SHIFT (5)
#define ECC_MS_SHIFT (16)
#define ECC_ENCDIADDR (0x08)
#define ECC_ENCIDLE (0x0C)
-#define ECC_ENCPAR(x) (0x10 + (x) * sizeof(u32))
#define ECC_ENCIRQ_EN (0x80)
#define ECC_ENCIRQ_STA (0x84)
#define ECC_DECCON (0x100)
@@ -66,7 +46,6 @@
#define DEC_CNFG_CORRECT (0x3 << 12)
#define ECC_DECIDLE (0x10C)
#define ECC_DECENUM0 (0x114)
-#define ERR_MASK (0x3f)
#define ECC_DECDONE (0x124)
#define ECC_DECIRQ_EN (0x200)
#define ECC_DECIRQ_STA (0x204)
@@ -78,8 +57,17 @@
#define ECC_IRQ_REG(op) ((op) == ECC_ENCODE ? \
ECC_ENCIRQ_EN : ECC_DECIRQ_EN)
+struct mtk_ecc_caps {
+ u32 err_mask;
+ const u8 *ecc_strength;
+ u8 num_ecc_strength;
+ u32 encode_parity_reg0;
+ int pg_irq_sel;
+};
+
struct mtk_ecc {
struct device *dev;
+ const struct mtk_ecc_caps *caps;
void __iomem *regs;
struct clk *clk;
@@ -87,7 +75,18 @@
struct mutex lock;
u32 sectors;
- u8 eccdata[112];
+ u8 *eccdata;
+};
+
+/* ecc strength that each IP supports */
+static const u8 ecc_strength_mt2701[] = {
+ 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, 32, 36,
+ 40, 44, 48, 52, 56, 60
+};
+
+static const u8 ecc_strength_mt2712[] = {
+ 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, 32, 36,
+ 40, 44, 48, 52, 56, 60, 68, 72, 80
};
static inline void mtk_ecc_wait_idle(struct mtk_ecc *ecc,
@@ -136,77 +135,24 @@
return IRQ_HANDLED;
}
-static void mtk_ecc_config(struct mtk_ecc *ecc, struct mtk_ecc_config *config)
+static int mtk_ecc_config(struct mtk_ecc *ecc, struct mtk_ecc_config *config)
{
- u32 ecc_bit = ECC_CNFG_4BIT, dec_sz, enc_sz;
- u32 reg;
+ u32 ecc_bit, dec_sz, enc_sz;
+ u32 reg, i;
- switch (config->strength) {
- case 4:
- ecc_bit = ECC_CNFG_4BIT;
- break;
- case 6:
- ecc_bit = ECC_CNFG_6BIT;
- break;
- case 8:
- ecc_bit = ECC_CNFG_8BIT;
- break;
- case 10:
- ecc_bit = ECC_CNFG_10BIT;
- break;
- case 12:
- ecc_bit = ECC_CNFG_12BIT;
- break;
- case 14:
- ecc_bit = ECC_CNFG_14BIT;
- break;
- case 16:
- ecc_bit = ECC_CNFG_16BIT;
- break;
- case 18:
- ecc_bit = ECC_CNFG_18BIT;
- break;
- case 20:
- ecc_bit = ECC_CNFG_20BIT;
- break;
- case 22:
- ecc_bit = ECC_CNFG_22BIT;
- break;
- case 24:
- ecc_bit = ECC_CNFG_24BIT;
- break;
- case 28:
- ecc_bit = ECC_CNFG_28BIT;
- break;
- case 32:
- ecc_bit = ECC_CNFG_32BIT;
- break;
- case 36:
- ecc_bit = ECC_CNFG_36BIT;
- break;
- case 40:
- ecc_bit = ECC_CNFG_40BIT;
- break;
- case 44:
- ecc_bit = ECC_CNFG_44BIT;
- break;
- case 48:
- ecc_bit = ECC_CNFG_48BIT;
- break;
- case 52:
- ecc_bit = ECC_CNFG_52BIT;
- break;
- case 56:
- ecc_bit = ECC_CNFG_56BIT;
- break;
- case 60:
- ecc_bit = ECC_CNFG_60BIT;
- break;
- default:
- dev_err(ecc->dev, "invalid strength %d, default to 4 bits\n",
- config->strength);
+ for (i = 0; i < ecc->caps->num_ecc_strength; i++) {
+ if (ecc->caps->ecc_strength[i] == config->strength)
+ break;
}
+ if (i == ecc->caps->num_ecc_strength) {
+ dev_err(ecc->dev, "invalid ecc strength %d\n",
+ config->strength);
+ return -EINVAL;
+ }
+
+ ecc_bit = i;
+
if (config->op == ECC_ENCODE) {
/* configure ECC encoder (in bits) */
enc_sz = config->len << 3;
@@ -232,6 +178,8 @@
if (config->sectors)
ecc->sectors = 1 << (config->sectors - 1);
}
+
+ return 0;
}
void mtk_ecc_get_stats(struct mtk_ecc *ecc, struct mtk_ecc_stats *stats,
@@ -247,8 +195,8 @@
offset = (i >> 2) << 2;
err = readl(ecc->regs + ECC_DECENUM0 + offset);
err = err >> ((i % 4) * 8);
- err &= ERR_MASK;
- if (err == ERR_MASK) {
+ err &= ecc->caps->err_mask;
+ if (err == ecc->caps->err_mask) {
/* uncorrectable errors */
stats->failed++;
continue;
@@ -313,6 +261,7 @@
int mtk_ecc_enable(struct mtk_ecc *ecc, struct mtk_ecc_config *config)
{
enum mtk_ecc_operation op = config->op;
+ u16 reg_val;
int ret;
ret = mutex_lock_interruptible(&ecc->lock);
@@ -322,11 +271,27 @@
}
mtk_ecc_wait_idle(ecc, op);
- mtk_ecc_config(ecc, config);
- writew(ECC_OP_ENABLE, ecc->regs + ECC_CTL_REG(op));
- init_completion(&ecc->done);
- writew(ECC_IRQ_EN, ecc->regs + ECC_IRQ_REG(op));
+ ret = mtk_ecc_config(ecc, config);
+ if (ret) {
+ mutex_unlock(&ecc->lock);
+ return ret;
+ }
+
+ if (config->mode != ECC_NFI_MODE || op != ECC_ENCODE) {
+ init_completion(&ecc->done);
+ reg_val = ECC_IRQ_EN;
+ /*
+ * For ECC_NFI_MODE, if ecc->caps->pg_irq_sel is 1, then it
+ * means this chip can only generate one ecc irq during page
+ * read / write. If is 0, generate one ecc irq each ecc step.
+ */
+ if (ecc->caps->pg_irq_sel && config->mode == ECC_NFI_MODE)
+ reg_val |= ECC_PG_IRQ_SEL;
+ writew(reg_val, ecc->regs + ECC_IRQ_REG(op));
+ }
+
+ writew(ECC_OP_ENABLE, ecc->regs + ECC_CTL_REG(op));
return 0;
}
@@ -396,7 +361,9 @@
len = (config->strength * ECC_PARITY_BITS + 7) >> 3;
/* write the parity bytes generated by the ECC back to temp buffer */
- __ioread32_copy(ecc->eccdata, ecc->regs + ECC_ENCPAR(0), round_up(len, 4));
+ __ioread32_copy(ecc->eccdata,
+ ecc->regs + ecc->caps->encode_parity_reg0,
+ round_up(len, 4));
/* copy into possibly unaligned OOB region with actual length */
memcpy(data + bytes, ecc->eccdata, len);
@@ -409,37 +376,79 @@
}
EXPORT_SYMBOL(mtk_ecc_encode);
-void mtk_ecc_adjust_strength(u32 *p)
+void mtk_ecc_adjust_strength(struct mtk_ecc *ecc, u32 *p)
{
- u32 ecc[] = {4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, 32, 36,
- 40, 44, 48, 52, 56, 60};
+ const u8 *ecc_strength = ecc->caps->ecc_strength;
int i;
- for (i = 0; i < ARRAY_SIZE(ecc); i++) {
- if (*p <= ecc[i]) {
+ for (i = 0; i < ecc->caps->num_ecc_strength; i++) {
+ if (*p <= ecc_strength[i]) {
if (!i)
- *p = ecc[i];
- else if (*p != ecc[i])
- *p = ecc[i - 1];
+ *p = ecc_strength[i];
+ else if (*p != ecc_strength[i])
+ *p = ecc_strength[i - 1];
return;
}
}
- *p = ecc[ARRAY_SIZE(ecc) - 1];
+ *p = ecc_strength[ecc->caps->num_ecc_strength - 1];
}
EXPORT_SYMBOL(mtk_ecc_adjust_strength);
+static const struct mtk_ecc_caps mtk_ecc_caps_mt2701 = {
+ .err_mask = 0x3f,
+ .ecc_strength = ecc_strength_mt2701,
+ .num_ecc_strength = 20,
+ .encode_parity_reg0 = 0x10,
+ .pg_irq_sel = 0,
+};
+
+static const struct mtk_ecc_caps mtk_ecc_caps_mt2712 = {
+ .err_mask = 0x7f,
+ .ecc_strength = ecc_strength_mt2712,
+ .num_ecc_strength = 23,
+ .encode_parity_reg0 = 0x300,
+ .pg_irq_sel = 1,
+};
+
+static const struct of_device_id mtk_ecc_dt_match[] = {
+ {
+ .compatible = "mediatek,mt2701-ecc",
+ .data = &mtk_ecc_caps_mt2701,
+ }, {
+ .compatible = "mediatek,mt2712-ecc",
+ .data = &mtk_ecc_caps_mt2712,
+ },
+ {},
+};
+
static int mtk_ecc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct mtk_ecc *ecc;
struct resource *res;
+ const struct of_device_id *of_ecc_id = NULL;
+ u32 max_eccdata_size;
int irq, ret;
ecc = devm_kzalloc(dev, sizeof(*ecc), GFP_KERNEL);
if (!ecc)
return -ENOMEM;
+ of_ecc_id = of_match_device(mtk_ecc_dt_match, &pdev->dev);
+ if (!of_ecc_id)
+ return -ENODEV;
+
+ ecc->caps = of_ecc_id->data;
+
+ max_eccdata_size = ecc->caps->num_ecc_strength - 1;
+ max_eccdata_size = ecc->caps->ecc_strength[max_eccdata_size];
+ max_eccdata_size = (max_eccdata_size * ECC_PARITY_BITS + 7) >> 3;
+ max_eccdata_size = round_up(max_eccdata_size, 4);
+ ecc->eccdata = devm_kzalloc(dev, max_eccdata_size, GFP_KERNEL);
+ if (!ecc->eccdata)
+ return -ENOMEM;
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
ecc->regs = devm_ioremap_resource(dev, res);
if (IS_ERR(ecc->regs)) {
@@ -500,19 +509,12 @@
return ret;
}
- mtk_ecc_hw_init(ecc);
-
return 0;
}
static SIMPLE_DEV_PM_OPS(mtk_ecc_pm_ops, mtk_ecc_suspend, mtk_ecc_resume);
#endif
-static const struct of_device_id mtk_ecc_dt_match[] = {
- { .compatible = "mediatek,mt2701-ecc" },
- {},
-};
-
MODULE_DEVICE_TABLE(of, mtk_ecc_dt_match);
static struct platform_driver mtk_ecc_driver = {
diff --git a/drivers/mtd/nand/mtk_ecc.h b/drivers/mtd/nand/mtk_ecc.h
index cbeba5c..d245c14 100644
--- a/drivers/mtd/nand/mtk_ecc.h
+++ b/drivers/mtd/nand/mtk_ecc.h
@@ -42,7 +42,7 @@
int mtk_ecc_wait_done(struct mtk_ecc *, enum mtk_ecc_operation);
int mtk_ecc_enable(struct mtk_ecc *, struct mtk_ecc_config *);
void mtk_ecc_disable(struct mtk_ecc *);
-void mtk_ecc_adjust_strength(u32 *);
+void mtk_ecc_adjust_strength(struct mtk_ecc *ecc, u32 *p);
struct mtk_ecc *of_mtk_ecc_get(struct device_node *);
void mtk_ecc_release(struct mtk_ecc *);
diff --git a/drivers/mtd/nand/mtk_nand.c b/drivers/mtd/nand/mtk_nand.c
index 6c517c6..f7ae994 100644
--- a/drivers/mtd/nand/mtk_nand.c
+++ b/drivers/mtd/nand/mtk_nand.c
@@ -24,6 +24,7 @@
#include <linux/module.h>
#include <linux/iopoll.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include "mtk_ecc.h"
/* NAND controller register definition */
@@ -38,23 +39,6 @@
#define NFI_PAGEFMT (0x04)
#define PAGEFMT_FDM_ECC_SHIFT (12)
#define PAGEFMT_FDM_SHIFT (8)
-#define PAGEFMT_SPARE_16 (0)
-#define PAGEFMT_SPARE_26 (1)
-#define PAGEFMT_SPARE_27 (2)
-#define PAGEFMT_SPARE_28 (3)
-#define PAGEFMT_SPARE_32 (4)
-#define PAGEFMT_SPARE_36 (5)
-#define PAGEFMT_SPARE_40 (6)
-#define PAGEFMT_SPARE_44 (7)
-#define PAGEFMT_SPARE_48 (8)
-#define PAGEFMT_SPARE_49 (9)
-#define PAGEFMT_SPARE_50 (0xa)
-#define PAGEFMT_SPARE_51 (0xb)
-#define PAGEFMT_SPARE_52 (0xc)
-#define PAGEFMT_SPARE_62 (0xd)
-#define PAGEFMT_SPARE_63 (0xe)
-#define PAGEFMT_SPARE_64 (0xf)
-#define PAGEFMT_SPARE_SHIFT (4)
#define PAGEFMT_SEC_SEL_512 BIT(2)
#define PAGEFMT_512_2K (0)
#define PAGEFMT_2K_4K (1)
@@ -115,6 +99,17 @@
#define MTK_RESET_TIMEOUT (1000000)
#define MTK_MAX_SECTOR (16)
#define MTK_NAND_MAX_NSELS (2)
+#define MTK_NFC_MIN_SPARE (16)
+#define ACCTIMING(tpoecs, tprecs, tc2r, tw2r, twh, twst, trlt) \
+ ((tpoecs) << 28 | (tprecs) << 22 | (tc2r) << 16 | \
+ (tw2r) << 12 | (twh) << 8 | (twst) << 4 | (trlt))
+
+struct mtk_nfc_caps {
+ const u8 *spare_size;
+ u8 num_spare_size;
+ u8 pageformat_spare_shift;
+ u8 nfi_clk_div;
+};
struct mtk_nfc_bad_mark_ctl {
void (*bm_swap)(struct mtd_info *, u8 *buf, int raw);
@@ -155,6 +150,7 @@
struct mtk_ecc *ecc;
struct device *dev;
+ const struct mtk_nfc_caps *caps;
void __iomem *regs;
struct completion done;
@@ -163,6 +159,20 @@
u8 *buffer;
};
+/*
+ * supported spare size of each IP.
+ * order should be the same with the spare size bitfiled defination of
+ * register NFI_PAGEFMT.
+ */
+static const u8 spare_size_mt2701[] = {
+ 16, 26, 27, 28, 32, 36, 40, 44, 48, 49, 50, 51, 52, 62, 63, 64
+};
+
+static const u8 spare_size_mt2712[] = {
+ 16, 26, 27, 28, 32, 36, 40, 44, 48, 49, 50, 51, 52, 62, 61, 63, 64, 67,
+ 74
+};
+
static inline struct mtk_nfc_nand_chip *to_mtk_nand(struct nand_chip *nand)
{
return container_of(nand, struct mtk_nfc_nand_chip, nand);
@@ -308,7 +318,7 @@
struct nand_chip *chip = mtd_to_nand(mtd);
struct mtk_nfc_nand_chip *mtk_nand = to_mtk_nand(chip);
struct mtk_nfc *nfc = nand_get_controller_data(chip);
- u32 fmt, spare;
+ u32 fmt, spare, i;
if (!mtd->writesize)
return 0;
@@ -352,63 +362,21 @@
if (chip->ecc.size == 1024)
spare >>= 1;
- switch (spare) {
- case 16:
- fmt |= (PAGEFMT_SPARE_16 << PAGEFMT_SPARE_SHIFT);
- break;
- case 26:
- fmt |= (PAGEFMT_SPARE_26 << PAGEFMT_SPARE_SHIFT);
- break;
- case 27:
- fmt |= (PAGEFMT_SPARE_27 << PAGEFMT_SPARE_SHIFT);
- break;
- case 28:
- fmt |= (PAGEFMT_SPARE_28 << PAGEFMT_SPARE_SHIFT);
- break;
- case 32:
- fmt |= (PAGEFMT_SPARE_32 << PAGEFMT_SPARE_SHIFT);
- break;
- case 36:
- fmt |= (PAGEFMT_SPARE_36 << PAGEFMT_SPARE_SHIFT);
- break;
- case 40:
- fmt |= (PAGEFMT_SPARE_40 << PAGEFMT_SPARE_SHIFT);
- break;
- case 44:
- fmt |= (PAGEFMT_SPARE_44 << PAGEFMT_SPARE_SHIFT);
- break;
- case 48:
- fmt |= (PAGEFMT_SPARE_48 << PAGEFMT_SPARE_SHIFT);
- break;
- case 49:
- fmt |= (PAGEFMT_SPARE_49 << PAGEFMT_SPARE_SHIFT);
- break;
- case 50:
- fmt |= (PAGEFMT_SPARE_50 << PAGEFMT_SPARE_SHIFT);
- break;
- case 51:
- fmt |= (PAGEFMT_SPARE_51 << PAGEFMT_SPARE_SHIFT);
- break;
- case 52:
- fmt |= (PAGEFMT_SPARE_52 << PAGEFMT_SPARE_SHIFT);
- break;
- case 62:
- fmt |= (PAGEFMT_SPARE_62 << PAGEFMT_SPARE_SHIFT);
- break;
- case 63:
- fmt |= (PAGEFMT_SPARE_63 << PAGEFMT_SPARE_SHIFT);
- break;
- case 64:
- fmt |= (PAGEFMT_SPARE_64 << PAGEFMT_SPARE_SHIFT);
- break;
- default:
- dev_err(nfc->dev, "invalid spare per sector %d\n", spare);
+ for (i = 0; i < nfc->caps->num_spare_size; i++) {
+ if (nfc->caps->spare_size[i] == spare)
+ break;
+ }
+
+ if (i == nfc->caps->num_spare_size) {
+ dev_err(nfc->dev, "invalid spare size %d\n", spare);
return -EINVAL;
}
+ fmt |= i << nfc->caps->pageformat_spare_shift;
+
fmt |= mtk_nand->fdm.reg_size << PAGEFMT_FDM_SHIFT;
fmt |= mtk_nand->fdm.ecc_size << PAGEFMT_FDM_ECC_SHIFT;
- nfi_writew(nfc, fmt, NFI_PAGEFMT);
+ nfi_writel(nfc, fmt, NFI_PAGEFMT);
nfc->ecc_cfg.strength = chip->ecc.strength;
nfc->ecc_cfg.len = chip->ecc.size + mtk_nand->fdm.ecc_size;
@@ -531,6 +499,74 @@
mtk_nfc_write_byte(mtd, buf[i]);
}
+static int mtk_nfc_setup_data_interface(struct mtd_info *mtd, int csline,
+ const struct nand_data_interface *conf)
+{
+ struct mtk_nfc *nfc = nand_get_controller_data(mtd_to_nand(mtd));
+ const struct nand_sdr_timings *timings;
+ u32 rate, tpoecs, tprecs, tc2r, tw2r, twh, twst, trlt;
+
+ timings = nand_get_sdr_timings(conf);
+ if (IS_ERR(timings))
+ return -ENOTSUPP;
+
+ if (csline == NAND_DATA_IFACE_CHECK_ONLY)
+ return 0;
+
+ rate = clk_get_rate(nfc->clk.nfi_clk);
+ /* There is a frequency divider in some IPs */
+ rate /= nfc->caps->nfi_clk_div;
+
+ /* turn clock rate into KHZ */
+ rate /= 1000;
+
+ tpoecs = max(timings->tALH_min, timings->tCLH_min) / 1000;
+ tpoecs = DIV_ROUND_UP(tpoecs * rate, 1000000);
+ tpoecs &= 0xf;
+
+ tprecs = max(timings->tCLS_min, timings->tALS_min) / 1000;
+ tprecs = DIV_ROUND_UP(tprecs * rate, 1000000);
+ tprecs &= 0x3f;
+
+ /* sdr interface has no tCR which means CE# low to RE# low */
+ tc2r = 0;
+
+ tw2r = timings->tWHR_min / 1000;
+ tw2r = DIV_ROUND_UP(tw2r * rate, 1000000);
+ tw2r = DIV_ROUND_UP(tw2r - 1, 2);
+ tw2r &= 0xf;
+
+ twh = max(timings->tREH_min, timings->tWH_min) / 1000;
+ twh = DIV_ROUND_UP(twh * rate, 1000000) - 1;
+ twh &= 0xf;
+
+ twst = timings->tWP_min / 1000;
+ twst = DIV_ROUND_UP(twst * rate, 1000000) - 1;
+ twst &= 0xf;
+
+ trlt = max(timings->tREA_max, timings->tRP_min) / 1000;
+ trlt = DIV_ROUND_UP(trlt * rate, 1000000) - 1;
+ trlt &= 0xf;
+
+ /*
+ * ACCON: access timing control register
+ * -------------------------------------
+ * 31:28: tpoecs, minimum required time for CS post pulling down after
+ * accessing the device
+ * 27:22: tprecs, minimum required time for CS pre pulling down before
+ * accessing the device
+ * 21:16: tc2r, minimum required time from NCEB low to NREB low
+ * 15:12: tw2r, minimum required time from NWEB high to NREB low.
+ * 11:08: twh, write enable hold time
+ * 07:04: twst, write wait states
+ * 03:00: trlt, read wait states
+ */
+ trlt = ACCTIMING(tpoecs, tprecs, tc2r, tw2r, twh, twst, trlt);
+ nfi_writel(nfc, trlt, NFI_ACCCON);
+
+ return 0;
+}
+
static int mtk_nfc_sector_encode(struct nand_chip *chip, u8 *data)
{
struct mtk_nfc *nfc = nand_get_controller_data(chip);
@@ -988,28 +1024,13 @@
static inline void mtk_nfc_hw_init(struct mtk_nfc *nfc)
{
/*
- * ACCON: access timing control register
- * -------------------------------------
- * 31:28: minimum required time for CS post pulling down after accessing
- * the device
- * 27:22: minimum required time for CS pre pulling down before accessing
- * the device
- * 21:16: minimum required time from NCEB low to NREB low
- * 15:12: minimum required time from NWEB high to NREB low.
- * 11:08: write enable hold time
- * 07:04: write wait states
- * 03:00: read wait states
- */
- nfi_writel(nfc, 0x10804211, NFI_ACCCON);
-
- /*
* CNRNB: nand ready/busy register
* -------------------------------
* 7:4: timeout register for polling the NAND busy/ready signal
* 0 : poll the status of the busy/ready signal after [7:4]*16 cycles.
*/
nfi_writew(nfc, 0xf1, NFI_CNRNB);
- nfi_writew(nfc, PAGEFMT_8K_16K, NFI_PAGEFMT);
+ nfi_writel(nfc, PAGEFMT_8K_16K, NFI_PAGEFMT);
mtk_nfc_hw_reset(nfc);
@@ -1131,12 +1152,12 @@
}
}
-static void mtk_nfc_set_spare_per_sector(u32 *sps, struct mtd_info *mtd)
+static int mtk_nfc_set_spare_per_sector(u32 *sps, struct mtd_info *mtd)
{
struct nand_chip *nand = mtd_to_nand(mtd);
- u32 spare[] = {16, 26, 27, 28, 32, 36, 40, 44,
- 48, 49, 50, 51, 52, 62, 63, 64};
- u32 eccsteps, i;
+ struct mtk_nfc *nfc = nand_get_controller_data(nand);
+ const u8 *spare = nfc->caps->spare_size;
+ u32 eccsteps, i, closest_spare = 0;
eccsteps = mtd->writesize / nand->ecc.size;
*sps = mtd->oobsize / eccsteps;
@@ -1144,28 +1165,31 @@
if (nand->ecc.size == 1024)
*sps >>= 1;
- for (i = 0; i < ARRAY_SIZE(spare); i++) {
- if (*sps <= spare[i]) {
- if (!i)
- *sps = spare[i];
- else if (*sps != spare[i])
- *sps = spare[i - 1];
- break;
+ if (*sps < MTK_NFC_MIN_SPARE)
+ return -EINVAL;
+
+ for (i = 0; i < nfc->caps->num_spare_size; i++) {
+ if (*sps >= spare[i] && spare[i] >= spare[closest_spare]) {
+ closest_spare = i;
+ if (*sps == spare[i])
+ break;
}
}
- if (i >= ARRAY_SIZE(spare))
- *sps = spare[ARRAY_SIZE(spare) - 1];
+ *sps = spare[closest_spare];
if (nand->ecc.size == 1024)
*sps <<= 1;
+
+ return 0;
}
static int mtk_nfc_ecc_init(struct device *dev, struct mtd_info *mtd)
{
struct nand_chip *nand = mtd_to_nand(mtd);
+ struct mtk_nfc *nfc = nand_get_controller_data(nand);
u32 spare;
- int free;
+ int free, ret;
/* support only ecc hw mode */
if (nand->ecc.mode != NAND_ECC_HW) {
@@ -1194,7 +1218,9 @@
nand->ecc.size = 1024;
}
- mtk_nfc_set_spare_per_sector(&spare, mtd);
+ ret = mtk_nfc_set_spare_per_sector(&spare, mtd);
+ if (ret)
+ return ret;
/* calculate oob bytes except ecc parity data */
free = ((nand->ecc.strength * ECC_PARITY_BITS) + 7) >> 3;
@@ -1214,7 +1240,7 @@
}
}
- mtk_ecc_adjust_strength(&nand->ecc.strength);
+ mtk_ecc_adjust_strength(nfc->ecc, &nand->ecc.strength);
dev_info(dev, "eccsize %d eccstrength %d\n",
nand->ecc.size, nand->ecc.strength);
@@ -1271,6 +1297,7 @@
nand->read_byte = mtk_nfc_read_byte;
nand->read_buf = mtk_nfc_read_buf;
nand->cmd_ctrl = mtk_nfc_cmd_ctrl;
+ nand->setup_data_interface = mtk_nfc_setup_data_interface;
/* set default mode in case dt entry is missing */
nand->ecc.mode = NAND_ECC_HW;
@@ -1312,7 +1339,10 @@
return -EINVAL;
}
- mtk_nfc_set_spare_per_sector(&chip->spare_per_sector, mtd);
+ ret = mtk_nfc_set_spare_per_sector(&chip->spare_per_sector, mtd);
+ if (ret)
+ return ret;
+
mtk_nfc_set_fdm(&chip->fdm, mtd);
mtk_nfc_set_bad_mark_ctl(&chip->bad_mark, mtd);
@@ -1354,12 +1384,39 @@
return 0;
}
+static const struct mtk_nfc_caps mtk_nfc_caps_mt2701 = {
+ .spare_size = spare_size_mt2701,
+ .num_spare_size = 16,
+ .pageformat_spare_shift = 4,
+ .nfi_clk_div = 1,
+};
+
+static const struct mtk_nfc_caps mtk_nfc_caps_mt2712 = {
+ .spare_size = spare_size_mt2712,
+ .num_spare_size = 19,
+ .pageformat_spare_shift = 16,
+ .nfi_clk_div = 2,
+};
+
+static const struct of_device_id mtk_nfc_id_table[] = {
+ {
+ .compatible = "mediatek,mt2701-nfc",
+ .data = &mtk_nfc_caps_mt2701,
+ }, {
+ .compatible = "mediatek,mt2712-nfc",
+ .data = &mtk_nfc_caps_mt2712,
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, mtk_nfc_id_table);
+
static int mtk_nfc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
struct mtk_nfc *nfc;
struct resource *res;
+ const struct of_device_id *of_nfc_id = NULL;
int ret, irq;
nfc = devm_kzalloc(dev, sizeof(*nfc), GFP_KERNEL);
@@ -1423,6 +1480,14 @@
goto clk_disable;
}
+ of_nfc_id = of_match_device(mtk_nfc_id_table, &pdev->dev);
+ if (!of_nfc_id) {
+ ret = -ENODEV;
+ goto clk_disable;
+ }
+
+ nfc->caps = of_nfc_id->data;
+
platform_set_drvdata(pdev, nfc);
ret = mtk_nfc_nand_chips_init(dev, nfc);
@@ -1485,8 +1550,6 @@
if (ret)
return ret;
- mtk_nfc_hw_init(nfc);
-
/* reset NAND chip if VCC was powered off */
list_for_each_entry(chip, &nfc->chips, node) {
nand = &chip->nand;
@@ -1503,12 +1566,6 @@
static SIMPLE_DEV_PM_OPS(mtk_nfc_pm_ops, mtk_nfc_suspend, mtk_nfc_resume);
#endif
-static const struct of_device_id mtk_nfc_id_table[] = {
- { .compatible = "mediatek,mt2701-nfc" },
- {}
-};
-MODULE_DEVICE_TABLE(of, mtk_nfc_id_table);
-
static struct platform_driver mtk_nfc_driver = {
.probe = mtk_nfc_probe,
.remove = mtk_nfc_remove,
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 61ca020..a764d5c 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -152,9 +152,8 @@
void (*select_chip)(struct mtd_info *mtd, int chip);
int (*correct_data)(struct mtd_info *mtd, u_char *dat,
u_char *read_ecc, u_char *calc_ecc);
- int (*setup_data_interface)(struct mtd_info *mtd,
- const struct nand_data_interface *conf,
- bool check_only);
+ int (*setup_data_interface)(struct mtd_info *mtd, int csline,
+ const struct nand_data_interface *conf);
/*
* On i.MX21 the CONFIG2:INT bit cannot be read if interrupts are masked
@@ -1015,9 +1014,8 @@
writew(0x4, NFC_V1_V2_WRPROT);
}
-static int mxc_nand_v2_setup_data_interface(struct mtd_info *mtd,
- const struct nand_data_interface *conf,
- bool check_only)
+static int mxc_nand_v2_setup_data_interface(struct mtd_info *mtd, int csline,
+ const struct nand_data_interface *conf)
{
struct nand_chip *nand_chip = mtd_to_nand(mtd);
struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
@@ -1075,7 +1073,7 @@
return -EINVAL;
}
- if (check_only)
+ if (csline == NAND_DATA_IFACE_CHECK_ONLY)
return 0;
ret = clk_set_rate(host->clk, rate);
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index bf8486c..5fa5ddc 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -755,6 +755,16 @@
return;
/* This applies to read commands */
+ case NAND_CMD_READ0:
+ /*
+ * READ0 is sometimes used to exit GET STATUS mode. When this
+ * is the case no address cycles are requested, and we can use
+ * this information to detect that we should not wait for the
+ * device to be ready.
+ */
+ if (column == -1 && page_addr == -1)
+ return;
+
default:
/*
* If we don't have access to the busy pin, we apply the given
@@ -889,6 +899,15 @@
return;
case NAND_CMD_READ0:
+ /*
+ * READ0 is sometimes used to exit GET STATUS mode. When this
+ * is the case no address cycles are requested, and we can use
+ * this information to detect that READSTART should not be
+ * issued.
+ */
+ if (column == -1 && page_addr == -1)
+ return;
+
chip->cmd_ctrl(mtd, NAND_CMD_READSTART,
NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
chip->cmd_ctrl(mtd, NAND_CMD_NONE,
@@ -1044,12 +1063,13 @@
/**
* nand_reset_data_interface - Reset data interface and timings
* @chip: The NAND chip
+ * @chipnr: Internal die id
*
* Reset the Data interface and timings to ONFI mode 0.
*
* Returns 0 for success or negative error code otherwise.
*/
-static int nand_reset_data_interface(struct nand_chip *chip)
+static int nand_reset_data_interface(struct nand_chip *chip, int chipnr)
{
struct mtd_info *mtd = nand_to_mtd(chip);
const struct nand_data_interface *conf;
@@ -1073,7 +1093,7 @@
*/
conf = nand_get_default_data_interface();
- ret = chip->setup_data_interface(mtd, conf, false);
+ ret = chip->setup_data_interface(mtd, chipnr, conf);
if (ret)
pr_err("Failed to configure data interface to SDR timing mode 0\n");
@@ -1083,6 +1103,7 @@
/**
* nand_setup_data_interface - Setup the best data interface and timings
* @chip: The NAND chip
+ * @chipnr: Internal die id
*
* Find and configure the best data interface and NAND timings supported by
* the chip and the driver.
@@ -1092,7 +1113,7 @@
*
* Returns 0 for success or negative error code otherwise.
*/
-static int nand_setup_data_interface(struct nand_chip *chip)
+static int nand_setup_data_interface(struct nand_chip *chip, int chipnr)
{
struct mtd_info *mtd = nand_to_mtd(chip);
int ret;
@@ -1116,7 +1137,7 @@
goto err;
}
- ret = chip->setup_data_interface(mtd, chip->data_interface, false);
+ ret = chip->setup_data_interface(mtd, chipnr, chip->data_interface);
err:
return ret;
}
@@ -1167,8 +1188,10 @@
if (ret)
continue;
- ret = chip->setup_data_interface(mtd, chip->data_interface,
- true);
+ /* Pass -1 to only */
+ ret = chip->setup_data_interface(mtd,
+ NAND_DATA_IFACE_CHECK_ONLY,
+ chip->data_interface);
if (!ret) {
chip->onfi_timing_mode_default = mode;
break;
@@ -1195,7 +1218,7 @@
struct mtd_info *mtd = nand_to_mtd(chip);
int ret;
- ret = nand_reset_data_interface(chip);
+ ret = nand_reset_data_interface(chip, chipnr);
if (ret)
return ret;
@@ -1208,7 +1231,7 @@
chip->select_chip(mtd, -1);
chip->select_chip(mtd, chipnr);
- ret = nand_setup_data_interface(chip);
+ ret = nand_setup_data_interface(chip, chipnr);
chip->select_chip(mtd, -1);
if (ret)
return ret;
@@ -1424,7 +1447,10 @@
for (; len >= sizeof(long);
len -= sizeof(long), bitmap += sizeof(long)) {
- weight = hweight_long(*((unsigned long *)bitmap));
+ unsigned long d = *((unsigned long *)bitmap);
+ if (d == ~0UL)
+ continue;
+ weight = hweight_long(d);
bitflips += BITS_PER_LONG - weight;
if (unlikely(bitflips > bitflips_threshold))
return -EBADMSG;
@@ -1527,14 +1553,15 @@
*
* Not for syndrome calculating ECC controllers, which use a special oob layout.
*/
-static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf, int oob_required, int page)
+int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page)
{
chip->read_buf(mtd, buf, mtd->writesize);
if (oob_required)
chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
return 0;
}
+EXPORT_SYMBOL(nand_read_page_raw);
/**
* nand_read_page_raw_syndrome - [INTERN] read raw page data without ecc
@@ -2472,8 +2499,8 @@
*
* Not for syndrome calculating ECC controllers, which use a special oob layout.
*/
-static int nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf, int oob_required, int page)
+int nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required, int page)
{
chip->write_buf(mtd, buf, mtd->writesize);
if (oob_required)
@@ -2481,6 +2508,7 @@
return 0;
}
+EXPORT_SYMBOL(nand_write_page_raw);
/**
* nand_write_page_raw_syndrome - [INTERN] raw page write function
@@ -2718,7 +2746,7 @@
*/
static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
uint32_t offset, int data_len, const uint8_t *buf,
- int oob_required, int page, int cached, int raw)
+ int oob_required, int page, int raw)
{
int status, subpage;
@@ -2744,30 +2772,12 @@
if (status < 0)
return status;
- /*
- * Cached progamming disabled for now. Not sure if it's worth the
- * trouble. The speed gain is not very impressive. (2.3->2.6Mib/s).
- */
- cached = 0;
+ if (nand_standard_page_accessors(&chip->ecc)) {
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
- if (!cached || !NAND_HAS_CACHEPROG(chip)) {
-
- if (nand_standard_page_accessors(&chip->ecc))
- chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
status = chip->waitfunc(mtd, chip);
- /*
- * See if operation failed and additional status checks are
- * available.
- */
- if ((status & NAND_STATUS_FAIL) && (chip->errstat))
- status = chip->errstat(mtd, chip, FL_WRITING, status,
- page);
-
if (status & NAND_STATUS_FAIL)
return -EIO;
- } else {
- chip->cmdfunc(mtd, NAND_CMD_CACHEDPROG, -1, -1);
- status = chip->waitfunc(mtd, chip);
}
return 0;
@@ -2875,7 +2885,6 @@
while (1) {
int bytes = mtd->writesize;
- int cached = writelen > bytes && page != blockmask;
uint8_t *wbuf = buf;
int use_bufpoi;
int part_pagewr = (column || writelen < mtd->writesize);
@@ -2893,7 +2902,6 @@
if (use_bufpoi) {
pr_debug("%s: using write bounce buffer for buf@%p\n",
__func__, buf);
- cached = 0;
if (part_pagewr)
bytes = min_t(int, bytes - column, writelen);
chip->pagebuf = -1;
@@ -2912,7 +2920,7 @@
}
ret = nand_write_page(mtd, chip, column, bytes, wbuf,
- oob_required, page, cached,
+ oob_required, page,
(ops->mode == MTD_OPS_RAW));
if (ret)
break;
@@ -3228,14 +3236,6 @@
status = chip->erase(mtd, page & chip->pagemask);
- /*
- * See if operation failed and additional status checks are
- * available
- */
- if ((status & NAND_STATUS_FAIL) && (chip->errstat))
- status = chip->errstat(mtd, chip, FL_ERASING,
- status, page);
-
/* See if block erase succeeded */
if (status & NAND_STATUS_FAIL) {
pr_debug("%s: failed erase, page 0x%08x\n",
@@ -3422,6 +3422,25 @@
}
/**
+ * nand_onfi_get_set_features_notsupp - set/get features stub returning
+ * -ENOTSUPP
+ * @mtd: MTD device structure
+ * @chip: nand chip info structure
+ * @addr: feature address.
+ * @subfeature_param: the subfeature parameters, a four bytes array.
+ *
+ * Should be used by NAND controller drivers that do not support the SET/GET
+ * FEATURES operations.
+ */
+int nand_onfi_get_set_features_notsupp(struct mtd_info *mtd,
+ struct nand_chip *chip, int addr,
+ u8 *subfeature_param)
+{
+ return -ENOTSUPP;
+}
+EXPORT_SYMBOL(nand_onfi_get_set_features_notsupp);
+
+/**
* nand_suspend - [MTD Interface] Suspend the NAND flash
* @mtd: MTD device structure
*/
@@ -4180,6 +4199,7 @@
[NAND_ECC_HW] = "hw",
[NAND_ECC_HW_SYNDROME] = "hw_syndrome",
[NAND_ECC_HW_OOB_FIRST] = "hw_oob_first",
+ [NAND_ECC_ON_DIE] = "on-die",
};
static int of_get_nand_ecc_mode(struct device_node *np)
@@ -4374,7 +4394,7 @@
* For the other dies, nand_reset() will automatically switch to the
* best mode for us.
*/
- ret = nand_setup_data_interface(chip);
+ ret = nand_setup_data_interface(chip, 0);
if (ret)
goto err_nand_init;
@@ -4512,6 +4532,226 @@
}
}
+/**
+ * nand_check_ecc_caps - check the sanity of preset ECC settings
+ * @chip: nand chip info structure
+ * @caps: ECC caps info structure
+ * @oobavail: OOB size that the ECC engine can use
+ *
+ * When ECC step size and strength are already set, check if they are supported
+ * by the controller and the calculated ECC bytes fit within the chip's OOB.
+ * On success, the calculated ECC bytes is set.
+ */
+int nand_check_ecc_caps(struct nand_chip *chip,
+ const struct nand_ecc_caps *caps, int oobavail)
+{
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ const struct nand_ecc_step_info *stepinfo;
+ int preset_step = chip->ecc.size;
+ int preset_strength = chip->ecc.strength;
+ int nsteps, ecc_bytes;
+ int i, j;
+
+ if (WARN_ON(oobavail < 0))
+ return -EINVAL;
+
+ if (!preset_step || !preset_strength)
+ return -ENODATA;
+
+ nsteps = mtd->writesize / preset_step;
+
+ for (i = 0; i < caps->nstepinfos; i++) {
+ stepinfo = &caps->stepinfos[i];
+
+ if (stepinfo->stepsize != preset_step)
+ continue;
+
+ for (j = 0; j < stepinfo->nstrengths; j++) {
+ if (stepinfo->strengths[j] != preset_strength)
+ continue;
+
+ ecc_bytes = caps->calc_ecc_bytes(preset_step,
+ preset_strength);
+ if (WARN_ON_ONCE(ecc_bytes < 0))
+ return ecc_bytes;
+
+ if (ecc_bytes * nsteps > oobavail) {
+ pr_err("ECC (step, strength) = (%d, %d) does not fit in OOB",
+ preset_step, preset_strength);
+ return -ENOSPC;
+ }
+
+ chip->ecc.bytes = ecc_bytes;
+
+ return 0;
+ }
+ }
+
+ pr_err("ECC (step, strength) = (%d, %d) not supported on this controller",
+ preset_step, preset_strength);
+
+ return -ENOTSUPP;
+}
+EXPORT_SYMBOL_GPL(nand_check_ecc_caps);
+
+/**
+ * nand_match_ecc_req - meet the chip's requirement with least ECC bytes
+ * @chip: nand chip info structure
+ * @caps: ECC engine caps info structure
+ * @oobavail: OOB size that the ECC engine can use
+ *
+ * If a chip's ECC requirement is provided, try to meet it with the least
+ * number of ECC bytes (i.e. with the largest number of OOB-free bytes).
+ * On success, the chosen ECC settings are set.
+ */
+int nand_match_ecc_req(struct nand_chip *chip,
+ const struct nand_ecc_caps *caps, int oobavail)
+{
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ const struct nand_ecc_step_info *stepinfo;
+ int req_step = chip->ecc_step_ds;
+ int req_strength = chip->ecc_strength_ds;
+ int req_corr, step_size, strength, nsteps, ecc_bytes, ecc_bytes_total;
+ int best_step, best_strength, best_ecc_bytes;
+ int best_ecc_bytes_total = INT_MAX;
+ int i, j;
+
+ if (WARN_ON(oobavail < 0))
+ return -EINVAL;
+
+ /* No information provided by the NAND chip */
+ if (!req_step || !req_strength)
+ return -ENOTSUPP;
+
+ /* number of correctable bits the chip requires in a page */
+ req_corr = mtd->writesize / req_step * req_strength;
+
+ for (i = 0; i < caps->nstepinfos; i++) {
+ stepinfo = &caps->stepinfos[i];
+ step_size = stepinfo->stepsize;
+
+ for (j = 0; j < stepinfo->nstrengths; j++) {
+ strength = stepinfo->strengths[j];
+
+ /*
+ * If both step size and strength are smaller than the
+ * chip's requirement, it is not easy to compare the
+ * resulted reliability.
+ */
+ if (step_size < req_step && strength < req_strength)
+ continue;
+
+ if (mtd->writesize % step_size)
+ continue;
+
+ nsteps = mtd->writesize / step_size;
+
+ ecc_bytes = caps->calc_ecc_bytes(step_size, strength);
+ if (WARN_ON_ONCE(ecc_bytes < 0))
+ continue;
+ ecc_bytes_total = ecc_bytes * nsteps;
+
+ if (ecc_bytes_total > oobavail ||
+ strength * nsteps < req_corr)
+ continue;
+
+ /*
+ * We assume the best is to meet the chip's requrement
+ * with the least number of ECC bytes.
+ */
+ if (ecc_bytes_total < best_ecc_bytes_total) {
+ best_ecc_bytes_total = ecc_bytes_total;
+ best_step = step_size;
+ best_strength = strength;
+ best_ecc_bytes = ecc_bytes;
+ }
+ }
+ }
+
+ if (best_ecc_bytes_total == INT_MAX)
+ return -ENOTSUPP;
+
+ chip->ecc.size = best_step;
+ chip->ecc.strength = best_strength;
+ chip->ecc.bytes = best_ecc_bytes;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(nand_match_ecc_req);
+
+/**
+ * nand_maximize_ecc - choose the max ECC strength available
+ * @chip: nand chip info structure
+ * @caps: ECC engine caps info structure
+ * @oobavail: OOB size that the ECC engine can use
+ *
+ * Choose the max ECC strength that is supported on the controller, and can fit
+ * within the chip's OOB. On success, the chosen ECC settings are set.
+ */
+int nand_maximize_ecc(struct nand_chip *chip,
+ const struct nand_ecc_caps *caps, int oobavail)
+{
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ const struct nand_ecc_step_info *stepinfo;
+ int step_size, strength, nsteps, ecc_bytes, corr;
+ int best_corr = 0;
+ int best_step = 0;
+ int best_strength, best_ecc_bytes;
+ int i, j;
+
+ if (WARN_ON(oobavail < 0))
+ return -EINVAL;
+
+ for (i = 0; i < caps->nstepinfos; i++) {
+ stepinfo = &caps->stepinfos[i];
+ step_size = stepinfo->stepsize;
+
+ /* If chip->ecc.size is already set, respect it */
+ if (chip->ecc.size && step_size != chip->ecc.size)
+ continue;
+
+ for (j = 0; j < stepinfo->nstrengths; j++) {
+ strength = stepinfo->strengths[j];
+
+ if (mtd->writesize % step_size)
+ continue;
+
+ nsteps = mtd->writesize / step_size;
+
+ ecc_bytes = caps->calc_ecc_bytes(step_size, strength);
+ if (WARN_ON_ONCE(ecc_bytes < 0))
+ continue;
+
+ if (ecc_bytes * nsteps > oobavail)
+ continue;
+
+ corr = strength * nsteps;
+
+ /*
+ * If the number of correctable bits is the same,
+ * bigger step_size has more reliability.
+ */
+ if (corr > best_corr ||
+ (corr == best_corr && step_size > best_step)) {
+ best_corr = corr;
+ best_step = step_size;
+ best_strength = strength;
+ best_ecc_bytes = ecc_bytes;
+ }
+ }
+ }
+
+ if (!best_corr)
+ return -ENOTSUPP;
+
+ chip->ecc.size = best_step;
+ chip->ecc.strength = best_strength;
+ chip->ecc.bytes = best_ecc_bytes;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(nand_maximize_ecc);
+
/*
* Check if the chip configuration meet the datasheet requirements.
@@ -4733,6 +4973,18 @@
}
break;
+ case NAND_ECC_ON_DIE:
+ if (!ecc->read_page || !ecc->write_page) {
+ WARN(1, "No ECC functions supplied; on-die ECC not possible\n");
+ ret = -EINVAL;
+ goto err_free;
+ }
+ if (!ecc->read_oob)
+ ecc->read_oob = nand_read_oob_std;
+ if (!ecc->write_oob)
+ ecc->write_oob = nand_write_oob_std;
+ break;
+
case NAND_ECC_NONE:
pr_warn("NAND_ECC_NONE selected by board driver. This is not recommended!\n");
ecc->read_page = nand_read_page_raw;
@@ -4773,6 +5025,11 @@
goto err_free;
}
ecc->total = ecc->steps * ecc->bytes;
+ if (ecc->total > mtd->oobsize) {
+ WARN(1, "Total number of ECC bytes exceeded oobsize\n");
+ ret = -EINVAL;
+ goto err_free;
+ }
/*
* The number of bytes available for a client to place data into
diff --git a/drivers/mtd/nand/nand_micron.c b/drivers/mtd/nand/nand_micron.c
index 8770110..c30ab60 100644
--- a/drivers/mtd/nand/nand_micron.c
+++ b/drivers/mtd/nand/nand_micron.c
@@ -17,6 +17,12 @@
#include <linux/mtd/nand.h>
+/*
+ * Special Micron status bit that indicates when the block has been
+ * corrected by on-die ECC and should be rewritten
+ */
+#define NAND_STATUS_WRITE_RECOMMENDED BIT(3)
+
struct nand_onfi_vendor_micron {
u8 two_plane_read;
u8 read_cache;
@@ -66,9 +72,197 @@
return 0;
}
+static int micron_nand_on_die_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section >= 4)
+ return -ERANGE;
+
+ oobregion->offset = (section * 16) + 8;
+ oobregion->length = 8;
+
+ return 0;
+}
+
+static int micron_nand_on_die_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section >= 4)
+ return -ERANGE;
+
+ oobregion->offset = (section * 16) + 2;
+ oobregion->length = 6;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops micron_nand_on_die_ooblayout_ops = {
+ .ecc = micron_nand_on_die_ooblayout_ecc,
+ .free = micron_nand_on_die_ooblayout_free,
+};
+
+static int micron_nand_on_die_ecc_setup(struct nand_chip *chip, bool enable)
+{
+ u8 feature[ONFI_SUBFEATURE_PARAM_LEN] = { 0, };
+
+ if (enable)
+ feature[0] |= ONFI_FEATURE_ON_DIE_ECC_EN;
+
+ return chip->onfi_set_features(nand_to_mtd(chip), chip,
+ ONFI_FEATURE_ON_DIE_ECC, feature);
+}
+
+static int
+micron_nand_read_page_on_die_ecc(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required,
+ int page)
+{
+ int status;
+ int max_bitflips = 0;
+
+ micron_nand_on_die_ecc_setup(chip, true);
+
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
+ chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
+ status = chip->read_byte(mtd);
+ if (status & NAND_STATUS_FAIL)
+ mtd->ecc_stats.failed++;
+ /*
+ * The internal ECC doesn't tell us the number of bitflips
+ * that have been corrected, but tells us if it recommends to
+ * rewrite the block. If it's the case, then we pretend we had
+ * a number of bitflips equal to the ECC strength, which will
+ * hint the NAND core to rewrite the block.
+ */
+ else if (status & NAND_STATUS_WRITE_RECOMMENDED)
+ max_bitflips = chip->ecc.strength;
+
+ chip->cmdfunc(mtd, NAND_CMD_READ0, -1, -1);
+
+ nand_read_page_raw(mtd, chip, buf, oob_required, page);
+
+ micron_nand_on_die_ecc_setup(chip, false);
+
+ return max_bitflips;
+}
+
+static int
+micron_nand_write_page_on_die_ecc(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required,
+ int page)
+{
+ int status;
+
+ micron_nand_on_die_ecc_setup(chip, true);
+
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
+ nand_write_page_raw(mtd, chip, buf, oob_required, page);
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+ status = chip->waitfunc(mtd, chip);
+
+ micron_nand_on_die_ecc_setup(chip, false);
+
+ return status & NAND_STATUS_FAIL ? -EIO : 0;
+}
+
+static int
+micron_nand_read_page_raw_on_die_ecc(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ uint8_t *buf, int oob_required,
+ int page)
+{
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
+ nand_read_page_raw(mtd, chip, buf, oob_required, page);
+
+ return 0;
+}
+
+static int
+micron_nand_write_page_raw_on_die_ecc(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ const uint8_t *buf, int oob_required,
+ int page)
+{
+ int status;
+
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
+ nand_write_page_raw(mtd, chip, buf, oob_required, page);
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+ status = chip->waitfunc(mtd, chip);
+
+ return status & NAND_STATUS_FAIL ? -EIO : 0;
+}
+
+enum {
+ /* The NAND flash doesn't support on-die ECC */
+ MICRON_ON_DIE_UNSUPPORTED,
+
+ /*
+ * The NAND flash supports on-die ECC and it can be
+ * enabled/disabled by a set features command.
+ */
+ MICRON_ON_DIE_SUPPORTED,
+
+ /*
+ * The NAND flash supports on-die ECC, and it cannot be
+ * disabled.
+ */
+ MICRON_ON_DIE_MANDATORY,
+};
+
+/*
+ * Try to detect if the NAND support on-die ECC. To do this, we enable
+ * the feature, and read back if it has been enabled as expected. We
+ * also check if it can be disabled, because some Micron NANDs do not
+ * allow disabling the on-die ECC and we don't support such NANDs for
+ * now.
+ *
+ * This function also has the side effect of disabling on-die ECC if
+ * it had been left enabled by the firmware/bootloader.
+ */
+static int micron_supports_on_die_ecc(struct nand_chip *chip)
+{
+ u8 feature[ONFI_SUBFEATURE_PARAM_LEN] = { 0, };
+ int ret;
+
+ if (chip->onfi_version == 0)
+ return MICRON_ON_DIE_UNSUPPORTED;
+
+ if (chip->bits_per_cell != 1)
+ return MICRON_ON_DIE_UNSUPPORTED;
+
+ ret = micron_nand_on_die_ecc_setup(chip, true);
+ if (ret)
+ return MICRON_ON_DIE_UNSUPPORTED;
+
+ chip->onfi_get_features(nand_to_mtd(chip), chip,
+ ONFI_FEATURE_ON_DIE_ECC, feature);
+ if ((feature[0] & ONFI_FEATURE_ON_DIE_ECC_EN) == 0)
+ return MICRON_ON_DIE_UNSUPPORTED;
+
+ ret = micron_nand_on_die_ecc_setup(chip, false);
+ if (ret)
+ return MICRON_ON_DIE_UNSUPPORTED;
+
+ chip->onfi_get_features(nand_to_mtd(chip), chip,
+ ONFI_FEATURE_ON_DIE_ECC, feature);
+ if (feature[0] & ONFI_FEATURE_ON_DIE_ECC_EN)
+ return MICRON_ON_DIE_MANDATORY;
+
+ /*
+ * Some Micron NANDs have an on-die ECC of 4/512, some other
+ * 8/512. We only support the former.
+ */
+ if (chip->onfi_params.ecc_bits != 4)
+ return MICRON_ON_DIE_UNSUPPORTED;
+
+ return MICRON_ON_DIE_SUPPORTED;
+}
+
static int micron_nand_init(struct nand_chip *chip)
{
struct mtd_info *mtd = nand_to_mtd(chip);
+ int ondie;
int ret;
ret = micron_nand_onfi_init(chip);
@@ -78,6 +272,34 @@
if (mtd->writesize == 2048)
chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
+ ondie = micron_supports_on_die_ecc(chip);
+
+ if (ondie == MICRON_ON_DIE_MANDATORY) {
+ pr_err("On-die ECC forcefully enabled, not supported\n");
+ return -EINVAL;
+ }
+
+ if (chip->ecc.mode == NAND_ECC_ON_DIE) {
+ if (ondie == MICRON_ON_DIE_UNSUPPORTED) {
+ pr_err("On-die ECC selected but not supported\n");
+ return -EINVAL;
+ }
+
+ chip->ecc.options = NAND_ECC_CUSTOM_PAGE_ACCESS;
+ chip->ecc.bytes = 8;
+ chip->ecc.size = 512;
+ chip->ecc.strength = 4;
+ chip->ecc.algo = NAND_ECC_BCH;
+ chip->ecc.read_page = micron_nand_read_page_on_die_ecc;
+ chip->ecc.write_page = micron_nand_write_page_on_die_ecc;
+ chip->ecc.read_page_raw =
+ micron_nand_read_page_raw_on_die_ecc;
+ chip->ecc.write_page_raw =
+ micron_nand_write_page_raw_on_die_ecc;
+
+ mtd_set_ooblayout(mtd, µn_nand_on_die_ooblayout_ops);
+ }
+
return 0;
}
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
index f8e463a..209170e 100644
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
@@ -166,7 +166,11 @@
}
}
- clk_prepare_enable(info->clk);
+ ret = clk_prepare_enable(info->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to prepare clock!\n");
+ return ret;
+ }
ret = nand_scan(mtd, 1);
if (ret)
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 649ba82..74dae4b 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -1812,6 +1812,8 @@
chip->write_buf = pxa3xx_nand_write_buf;
chip->options |= NAND_NO_SUBPAGE_WRITE;
chip->cmdfunc = nand_cmdfunc;
+ chip->onfi_set_features = nand_onfi_get_set_features_notsupp;
+ chip->onfi_get_features = nand_onfi_get_set_features_notsupp;
}
nand_hw_control_init(chip->controller);
diff --git a/drivers/mtd/nand/qcom_nandc.c b/drivers/mtd/nand/qcom_nandc.c
index 57d483a..88af714 100644
--- a/drivers/mtd/nand/qcom_nandc.c
+++ b/drivers/mtd/nand/qcom_nandc.c
@@ -2008,6 +2008,8 @@
chip->read_byte = qcom_nandc_read_byte;
chip->read_buf = qcom_nandc_read_buf;
chip->write_buf = qcom_nandc_write_buf;
+ chip->onfi_set_features = nand_onfi_get_set_features_notsupp;
+ chip->onfi_get_features = nand_onfi_get_set_features_notsupp;
/*
* the bad block marker is readable only when we read the last codeword
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index f0b030d..9e0c849 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -812,9 +812,8 @@
return -ENODEV;
}
-static int s3c2410_nand_setup_data_interface(struct mtd_info *mtd,
- const struct nand_data_interface *conf,
- bool check_only)
+static int s3c2410_nand_setup_data_interface(struct mtd_info *mtd, int csline,
+ const struct nand_data_interface *conf)
{
struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
struct s3c2410_platform_nand *pdata = info->platform;
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index 442ce61..891ac7b 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -1183,6 +1183,8 @@
nand->read_buf = flctl_read_buf;
nand->select_chip = flctl_select_chip;
nand->cmdfunc = flctl_cmdfunc;
+ nand->onfi_set_features = nand_onfi_get_set_features_notsupp;
+ nand->onfi_get_features = nand_onfi_get_set_features_notsupp;
if (pdata->flcmncr_val & SEL_16BIT)
nand->options |= NAND_BUSWIDTH_16;
diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c
index 118a26f..d0b6f8f 100644
--- a/drivers/mtd/nand/sunxi_nand.c
+++ b/drivers/mtd/nand/sunxi_nand.c
@@ -1301,7 +1301,6 @@
sunxi_nfc_hw_ecc_enable(mtd);
- chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
for (i = data_offs / ecc->size;
i < DIV_ROUND_UP(data_offs + readlen, ecc->size); i++) {
int data_off = i * ecc->size;
@@ -1592,9 +1591,8 @@
#define sunxi_nand_lookup_timing(l, p, c) \
_sunxi_nand_lookup_timing(l, ARRAY_SIZE(l), p, c)
-static int sunxi_nfc_setup_data_interface(struct mtd_info *mtd,
- const struct nand_data_interface *conf,
- bool check_only)
+static int sunxi_nfc_setup_data_interface(struct mtd_info *mtd, int csline,
+ const struct nand_data_interface *conf)
{
struct nand_chip *nand = mtd_to_nand(mtd);
struct sunxi_nand_chip *chip = to_sunxi_nand(nand);
@@ -1707,7 +1705,7 @@
return tRHW;
}
- if (check_only)
+ if (csline == NAND_DATA_IFACE_CHECK_ONLY)
return 0;
/*
@@ -1922,7 +1920,6 @@
ecc->write_subpage = sunxi_nfc_hw_ecc_write_subpage;
ecc->read_oob_raw = nand_read_oob_std;
ecc->write_oob_raw = nand_write_oob_std;
- ecc->read_subpage = sunxi_nfc_hw_ecc_read_subpage;
return 0;
}
diff --git a/drivers/mtd/nand/tango_nand.c b/drivers/mtd/nand/tango_nand.c
index 49b286c..9d40b79 100644
--- a/drivers/mtd/nand/tango_nand.c
+++ b/drivers/mtd/nand/tango_nand.c
@@ -303,7 +303,7 @@
const u8 *buf, int oob_required, int page)
{
struct tango_nfc *nfc = to_tango_nfc(chip->controller);
- int err, len = mtd->writesize;
+ int err, status, len = mtd->writesize;
/* Calling tango_write_oob() would send PAGEPROG twice */
if (oob_required)
@@ -314,6 +314,10 @@
if (err)
return err;
+ status = chip->waitfunc(mtd, chip);
+ if (status & NAND_STATUS_FAIL)
+ return -EIO;
+
return 0;
}
@@ -340,7 +344,7 @@
if (!*buf) {
/* skip over "len" bytes */
- chip->cmdfunc(mtd, NAND_CMD_SEQIN, *pos, -1);
+ chip->cmdfunc(mtd, NAND_CMD_RNDIN, *pos, -1);
} else {
tango_write_buf(mtd, *buf, len);
*buf += len;
@@ -431,9 +435,16 @@
static int tango_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
const u8 *buf, int oob_required, int page)
{
+ int status;
+
chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0, page);
raw_write(chip, buf, chip->oob_poi);
chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+
+ status = chip->waitfunc(mtd, chip);
+ if (status & NAND_STATUS_FAIL)
+ return -EIO;
+
return 0;
}
@@ -484,9 +495,8 @@
return DIV_ROUND_UP_ULL((u64)kHz * ps, NSEC_PER_SEC);
}
-static int tango_set_timings(struct mtd_info *mtd,
- const struct nand_data_interface *conf,
- bool check_only)
+static int tango_set_timings(struct mtd_info *mtd, int csline,
+ const struct nand_data_interface *conf)
{
const struct nand_sdr_timings *sdr = nand_get_sdr_timings(conf);
struct nand_chip *chip = mtd_to_nand(mtd);
@@ -498,7 +508,7 @@
if (IS_ERR(sdr))
return PTR_ERR(sdr);
- if (check_only)
+ if (csline == NAND_DATA_IFACE_CHECK_ONLY)
return 0;
Trdy = to_ticks(kHz, sdr->tCEA_max - sdr->tREA_max);
diff --git a/drivers/mtd/nand/vf610_nfc.c b/drivers/mtd/nand/vf610_nfc.c
index 3ea4bb1..744ab10 100644
--- a/drivers/mtd/nand/vf610_nfc.c
+++ b/drivers/mtd/nand/vf610_nfc.c
@@ -703,6 +703,8 @@
chip->read_buf = vf610_nfc_read_buf;
chip->write_buf = vf610_nfc_write_buf;
chip->select_chip = vf610_nfc_select_chip;
+ chip->onfi_set_features = nand_onfi_get_set_features_notsupp;
+ chip->onfi_get_features = nand_onfi_get_set_features_notsupp;
chip->options |= NAND_NO_SUBPAGE_WRITE;
diff --git a/drivers/mtd/parsers/Kconfig b/drivers/mtd/parsers/Kconfig
new file mode 100644
index 0000000..d206b3c
--- /dev/null
+++ b/drivers/mtd/parsers/Kconfig
@@ -0,0 +1,8 @@
+config MTD_PARSER_TRX
+ tristate "Parser for TRX format partitions"
+ depends on MTD && (BCM47XX || ARCH_BCM_5301X || COMPILE_TEST)
+ help
+ TRX is a firmware format used by Broadcom on their devices. It
+ may contain up to 3/4 partitions (depending on the version).
+ This driver will parse TRX header and report at least two partitions:
+ kernel and rootfs.
diff --git a/drivers/mtd/parsers/Makefile b/drivers/mtd/parsers/Makefile
new file mode 100644
index 0000000..4d9024e
--- /dev/null
+++ b/drivers/mtd/parsers/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_MTD_PARSER_TRX) += parser_trx.o
diff --git a/drivers/mtd/parsers/parser_trx.c b/drivers/mtd/parsers/parser_trx.c
new file mode 100644
index 0000000..df360a7
--- /dev/null
+++ b/drivers/mtd/parsers/parser_trx.c
@@ -0,0 +1,126 @@
+/*
+ * Parser for TRX format partitions
+ *
+ * Copyright (C) 2012 - 2017 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#define TRX_PARSER_MAX_PARTS 4
+
+/* Magics */
+#define TRX_MAGIC 0x30524448
+#define UBI_EC_MAGIC 0x23494255 /* UBI# */
+
+struct trx_header {
+ uint32_t magic;
+ uint32_t length;
+ uint32_t crc32;
+ uint16_t flags;
+ uint16_t version;
+ uint32_t offset[3];
+} __packed;
+
+static const char *parser_trx_data_part_name(struct mtd_info *master,
+ size_t offset)
+{
+ uint32_t buf;
+ size_t bytes_read;
+ int err;
+
+ err = mtd_read(master, offset, sizeof(buf), &bytes_read,
+ (uint8_t *)&buf);
+ if (err && !mtd_is_bitflip(err)) {
+ pr_err("mtd_read error while parsing (offset: 0x%zX): %d\n",
+ offset, err);
+ goto out_default;
+ }
+
+ if (buf == UBI_EC_MAGIC)
+ return "ubi";
+
+out_default:
+ return "rootfs";
+}
+
+static int parser_trx_parse(struct mtd_info *mtd,
+ const struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
+{
+ struct mtd_partition *parts;
+ struct mtd_partition *part;
+ struct trx_header trx;
+ size_t bytes_read;
+ uint8_t curr_part = 0, i = 0;
+ int err;
+
+ parts = kzalloc(sizeof(struct mtd_partition) * TRX_PARSER_MAX_PARTS,
+ GFP_KERNEL);
+ if (!parts)
+ return -ENOMEM;
+
+ err = mtd_read(mtd, 0, sizeof(trx), &bytes_read, (uint8_t *)&trx);
+ if (err) {
+ pr_err("MTD reading error: %d\n", err);
+ kfree(parts);
+ return err;
+ }
+
+ if (trx.magic != TRX_MAGIC) {
+ kfree(parts);
+ return -ENOENT;
+ }
+
+ /* We have LZMA loader if there is address in offset[2] */
+ if (trx.offset[2]) {
+ part = &parts[curr_part++];
+ part->name = "loader";
+ part->offset = trx.offset[i];
+ i++;
+ }
+
+ if (trx.offset[i]) {
+ part = &parts[curr_part++];
+ part->name = "linux";
+ part->offset = trx.offset[i];
+ i++;
+ }
+
+ if (trx.offset[i]) {
+ part = &parts[curr_part++];
+ part->name = parser_trx_data_part_name(mtd, trx.offset[i]);
+ part->offset = trx.offset[i];
+ i++;
+ }
+
+ /*
+ * Assume that every partition ends at the beginning of the one it is
+ * followed by.
+ */
+ for (i = 0; i < curr_part; i++) {
+ u64 next_part_offset = (i < curr_part - 1) ?
+ parts[i + 1].offset : mtd->size;
+
+ parts[i].size = next_part_offset - parts[i].offset;
+ }
+
+ *pparts = parts;
+ return i;
+};
+
+static struct mtd_part_parser mtd_parser_trx = {
+ .parse_fn = parser_trx_parse,
+ .name = "trx",
+};
+module_mtd_part_parser(mtd_parser_trx);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Parser for TRX format partitions");
diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
index bfdfb1e..293c8a4 100644
--- a/drivers/mtd/spi-nor/Kconfig
+++ b/drivers/mtd/spi-nor/Kconfig
@@ -108,7 +108,7 @@
config SPI_STM32_QUADSPI
tristate "STM32 Quad SPI controller"
- depends on ARCH_STM32
+ depends on ARCH_STM32 || COMPILE_TEST
help
This enables support for the STM32 Quad SPI controller.
We only connect the NOR to this controller.
diff --git a/drivers/mtd/spi-nor/aspeed-smc.c b/drivers/mtd/spi-nor/aspeed-smc.c
index 56051d3..0106357 100644
--- a/drivers/mtd/spi-nor/aspeed-smc.c
+++ b/drivers/mtd/spi-nor/aspeed-smc.c
@@ -19,6 +19,7 @@
#include <linux/mtd/spi-nor.h>
#include <linux/of.h>
#include <linux/of_platform.h>
+#include <linux/sizes.h>
#include <linux/sysfs.h>
#define DEVICE_NAME "aspeed-smc"
@@ -97,6 +98,7 @@
struct aspeed_smc_controller *controller;
void __iomem *ctl; /* control register */
void __iomem *ahb_base; /* base of chip window */
+ u32 ahb_window_size; /* chip mapping window size */
u32 ctl_val[smc_max]; /* control settings */
enum aspeed_smc_flash_type type; /* what type of flash */
struct spi_nor nor;
@@ -109,6 +111,7 @@
const struct aspeed_smc_info *info; /* type info of controller */
void __iomem *regs; /* controller registers */
void __iomem *ahb_base; /* per-chip windows resource */
+ u32 ahb_window_size; /* full mapping window size */
struct aspeed_smc_chip *chips[0]; /* pointers to attached chips */
};
@@ -180,8 +183,7 @@
#define CONTROL_KEEP_MASK \
(CONTROL_AAF_MODE | CONTROL_CE_INACTIVE_MASK | CONTROL_CLK_DIV4 | \
- CONTROL_IO_DUMMY_MASK | CONTROL_CLOCK_FREQ_SEL_MASK | \
- CONTROL_LSB_FIRST | CONTROL_CLOCK_MODE_3)
+ CONTROL_CLOCK_FREQ_SEL_MASK | CONTROL_LSB_FIRST | CONTROL_CLOCK_MODE_3)
/*
* The Segment Register uses a 8MB unit to encode the start address
@@ -194,6 +196,10 @@
#define SEGMENT_ADDR_REG0 0x30
#define SEGMENT_ADDR_START(_r) ((((_r) >> 16) & 0xFF) << 23)
#define SEGMENT_ADDR_END(_r) ((((_r) >> 24) & 0xFF) << 23)
+#define SEGMENT_ADDR_VALUE(start, end) \
+ (((((start) >> 23) & 0xFF) << 16) | ((((end) >> 23) & 0xFF) << 24))
+#define SEGMENT_ADDR_REG(controller, cs) \
+ ((controller)->regs + SEGMENT_ADDR_REG0 + (cs) * 4)
/*
* In user mode all data bytes read or written to the chip decode address
@@ -439,8 +445,7 @@
u32 reg;
if (controller->info->nce > 1) {
- reg = readl(controller->regs + SEGMENT_ADDR_REG0 +
- chip->cs * 4);
+ reg = readl(SEGMENT_ADDR_REG(controller, chip->cs));
if (SEGMENT_ADDR_START(reg) >= SEGMENT_ADDR_END(reg))
return NULL;
@@ -451,6 +456,146 @@
return controller->ahb_base + offset;
}
+static u32 aspeed_smc_ahb_base_phy(struct aspeed_smc_controller *controller)
+{
+ u32 seg0_val = readl(SEGMENT_ADDR_REG(controller, 0));
+
+ return SEGMENT_ADDR_START(seg0_val);
+}
+
+static u32 chip_set_segment(struct aspeed_smc_chip *chip, u32 cs, u32 start,
+ u32 size)
+{
+ struct aspeed_smc_controller *controller = chip->controller;
+ void __iomem *seg_reg;
+ u32 seg_oldval, seg_newval, ahb_base_phy, end;
+
+ ahb_base_phy = aspeed_smc_ahb_base_phy(controller);
+
+ seg_reg = SEGMENT_ADDR_REG(controller, cs);
+ seg_oldval = readl(seg_reg);
+
+ /*
+ * If the chip size is not specified, use the default segment
+ * size, but take into account the possible overlap with the
+ * previous segment
+ */
+ if (!size)
+ size = SEGMENT_ADDR_END(seg_oldval) - start;
+
+ /*
+ * The segment cannot exceed the maximum window size of the
+ * controller.
+ */
+ if (start + size > ahb_base_phy + controller->ahb_window_size) {
+ size = ahb_base_phy + controller->ahb_window_size - start;
+ dev_warn(chip->nor.dev, "CE%d window resized to %dMB",
+ cs, size >> 20);
+ }
+
+ end = start + size;
+ seg_newval = SEGMENT_ADDR_VALUE(start, end);
+ writel(seg_newval, seg_reg);
+
+ /*
+ * Restore default value if something goes wrong. The chip
+ * might have set some bogus value and we would loose access
+ * to the chip.
+ */
+ if (seg_newval != readl(seg_reg)) {
+ dev_err(chip->nor.dev, "CE%d window invalid", cs);
+ writel(seg_oldval, seg_reg);
+ start = SEGMENT_ADDR_START(seg_oldval);
+ end = SEGMENT_ADDR_END(seg_oldval);
+ size = end - start;
+ }
+
+ dev_info(chip->nor.dev, "CE%d window [ 0x%.8x - 0x%.8x ] %dMB",
+ cs, start, end, size >> 20);
+
+ return size;
+}
+
+/*
+ * The segment register defines the mapping window on the AHB bus and
+ * it needs to be configured depending on the chip size. The segment
+ * register of the following CE also needs to be tuned in order to
+ * provide a contiguous window across multiple chips.
+ *
+ * This is expected to be called in increasing CE order
+ */
+static u32 aspeed_smc_chip_set_segment(struct aspeed_smc_chip *chip)
+{
+ struct aspeed_smc_controller *controller = chip->controller;
+ u32 ahb_base_phy, start;
+ u32 size = chip->nor.mtd.size;
+
+ /*
+ * Each controller has a chip size limit for direct memory
+ * access
+ */
+ if (size > controller->info->maxsize)
+ size = controller->info->maxsize;
+
+ /*
+ * The AST2400 SPI controller only handles one chip and does
+ * not have segment registers. Let's use the chip size for the
+ * AHB window.
+ */
+ if (controller->info == &spi_2400_info)
+ goto out;
+
+ /*
+ * The AST2500 SPI controller has a HW bug when the CE0 chip
+ * size reaches 128MB. Enforce a size limit of 120MB to
+ * prevent the controller from using bogus settings in the
+ * segment register.
+ */
+ if (chip->cs == 0 && controller->info == &spi_2500_info &&
+ size == SZ_128M) {
+ size = 120 << 20;
+ dev_info(chip->nor.dev,
+ "CE%d window resized to %dMB (AST2500 HW quirk)",
+ chip->cs, size >> 20);
+ }
+
+ ahb_base_phy = aspeed_smc_ahb_base_phy(controller);
+
+ /*
+ * As a start address for the current segment, use the default
+ * start address if we are handling CE0 or use the previous
+ * segment ending address
+ */
+ if (chip->cs) {
+ u32 prev = readl(SEGMENT_ADDR_REG(controller, chip->cs - 1));
+
+ start = SEGMENT_ADDR_END(prev);
+ } else {
+ start = ahb_base_phy;
+ }
+
+ size = chip_set_segment(chip, chip->cs, start, size);
+
+ /* Update chip base address on the AHB bus */
+ chip->ahb_base = controller->ahb_base + (start - ahb_base_phy);
+
+ /*
+ * Now, make sure the next segment does not overlap with the
+ * current one we just configured, even if there is no
+ * available chip. That could break access in Command Mode.
+ */
+ if (chip->cs < controller->info->nce - 1)
+ chip_set_segment(chip, chip->cs + 1, start + size, 0);
+
+out:
+ if (size < chip->nor.mtd.size)
+ dev_warn(chip->nor.dev,
+ "CE%d window too small for chip %dMB",
+ chip->cs, (u32)chip->nor.mtd.size >> 20);
+
+ return size;
+}
+
static void aspeed_smc_chip_enable_write(struct aspeed_smc_chip *chip)
{
struct aspeed_smc_controller *controller = chip->controller;
@@ -524,7 +669,7 @@
*/
chip->ahb_base = aspeed_smc_chip_base(chip, res);
if (!chip->ahb_base) {
- dev_warn(chip->nor.dev, "CE segment window closed.\n");
+ dev_warn(chip->nor.dev, "CE%d window closed", chip->cs);
return -EINVAL;
}
@@ -571,6 +716,9 @@
if (chip->nor.addr_width == 4 && info->set_4b)
info->set_4b(chip);
+ /* This is for direct AHB access when using Command Mode. */
+ chip->ahb_window_size = aspeed_smc_chip_set_segment(chip);
+
/*
* base mode has not been optimized yet. use it for writes.
*/
@@ -585,14 +733,12 @@
* TODO: Adjust clocks if fast read is supported and interpret
* SPI-NOR flags to adjust controller settings.
*/
- switch (chip->nor.flash_read) {
- case SPI_NOR_NORMAL:
- cmd = CONTROL_COMMAND_MODE_NORMAL;
- break;
- case SPI_NOR_FAST:
- cmd = CONTROL_COMMAND_MODE_FREAD;
- break;
- default:
+ if (chip->nor.read_proto == SNOR_PROTO_1_1_1) {
+ if (chip->nor.read_dummy == 0)
+ cmd = CONTROL_COMMAND_MODE_NORMAL;
+ else
+ cmd = CONTROL_COMMAND_MODE_FREAD;
+ } else {
dev_err(chip->nor.dev, "unsupported SPI read mode\n");
return -EINVAL;
}
@@ -608,6 +754,11 @@
static int aspeed_smc_setup_flash(struct aspeed_smc_controller *controller,
struct device_node *np, struct resource *r)
{
+ const struct spi_nor_hwcaps hwcaps = {
+ .mask = SNOR_HWCAPS_READ |
+ SNOR_HWCAPS_READ_FAST |
+ SNOR_HWCAPS_PP,
+ };
const struct aspeed_smc_info *info = controller->info;
struct device *dev = controller->dev;
struct device_node *child;
@@ -671,11 +822,11 @@
break;
/*
- * TODO: Add support for SPI_NOR_QUAD and SPI_NOR_DUAL
+ * TODO: Add support for Dual and Quad SPI protocols
* attach when board support is present as determined
* by of property.
*/
- ret = spi_nor_scan(nor, NULL, SPI_NOR_NORMAL);
+ ret = spi_nor_scan(nor, NULL, &hwcaps);
if (ret)
break;
@@ -731,6 +882,8 @@
if (IS_ERR(controller->ahb_base))
return PTR_ERR(controller->ahb_base);
+ controller->ahb_window_size = resource_size(res);
+
ret = aspeed_smc_setup_flash(controller, np, res);
if (ret)
dev_err(dev, "Aspeed SMC probe failed %d\n", ret);
diff --git a/drivers/mtd/spi-nor/atmel-quadspi.c b/drivers/mtd/spi-nor/atmel-quadspi.c
index 47937d9..ba76fa8 100644
--- a/drivers/mtd/spi-nor/atmel-quadspi.c
+++ b/drivers/mtd/spi-nor/atmel-quadspi.c
@@ -275,14 +275,48 @@
static int atmel_qspi_run_command(struct atmel_qspi *aq,
const struct atmel_qspi_command *cmd,
- u32 ifr_tfrtyp, u32 ifr_width)
+ u32 ifr_tfrtyp, enum spi_nor_protocol proto)
{
u32 iar, icr, ifr, sr;
int err = 0;
iar = 0;
icr = 0;
- ifr = ifr_tfrtyp | ifr_width;
+ ifr = ifr_tfrtyp;
+
+ /* Set the SPI protocol */
+ switch (proto) {
+ case SNOR_PROTO_1_1_1:
+ ifr |= QSPI_IFR_WIDTH_SINGLE_BIT_SPI;
+ break;
+
+ case SNOR_PROTO_1_1_2:
+ ifr |= QSPI_IFR_WIDTH_DUAL_OUTPUT;
+ break;
+
+ case SNOR_PROTO_1_1_4:
+ ifr |= QSPI_IFR_WIDTH_QUAD_OUTPUT;
+ break;
+
+ case SNOR_PROTO_1_2_2:
+ ifr |= QSPI_IFR_WIDTH_DUAL_IO;
+ break;
+
+ case SNOR_PROTO_1_4_4:
+ ifr |= QSPI_IFR_WIDTH_QUAD_IO;
+ break;
+
+ case SNOR_PROTO_2_2_2:
+ ifr |= QSPI_IFR_WIDTH_DUAL_CMD;
+ break;
+
+ case SNOR_PROTO_4_4_4:
+ ifr |= QSPI_IFR_WIDTH_QUAD_CMD;
+ break;
+
+ default:
+ return -EINVAL;
+ }
/* Compute instruction parameters */
if (cmd->enable.bits.instruction) {
@@ -434,7 +468,7 @@
cmd.rx_buf = buf;
cmd.buf_len = len;
return atmel_qspi_run_command(aq, &cmd, QSPI_IFR_TFRTYP_TRSFR_READ,
- QSPI_IFR_WIDTH_SINGLE_BIT_SPI);
+ nor->reg_proto);
}
static int atmel_qspi_write_reg(struct spi_nor *nor, u8 opcode,
@@ -450,7 +484,7 @@
cmd.tx_buf = buf;
cmd.buf_len = len;
return atmel_qspi_run_command(aq, &cmd, QSPI_IFR_TFRTYP_TRSFR_WRITE,
- QSPI_IFR_WIDTH_SINGLE_BIT_SPI);
+ nor->reg_proto);
}
static ssize_t atmel_qspi_write(struct spi_nor *nor, loff_t to, size_t len,
@@ -469,7 +503,7 @@
cmd.tx_buf = write_buf;
cmd.buf_len = len;
ret = atmel_qspi_run_command(aq, &cmd, QSPI_IFR_TFRTYP_TRSFR_WRITE_MEM,
- QSPI_IFR_WIDTH_SINGLE_BIT_SPI);
+ nor->write_proto);
return (ret < 0) ? ret : len;
}
@@ -484,7 +518,7 @@
cmd.instruction = nor->erase_opcode;
cmd.address = (u32)offs;
return atmel_qspi_run_command(aq, &cmd, QSPI_IFR_TFRTYP_TRSFR_WRITE,
- QSPI_IFR_WIDTH_SINGLE_BIT_SPI);
+ nor->reg_proto);
}
static ssize_t atmel_qspi_read(struct spi_nor *nor, loff_t from, size_t len,
@@ -493,27 +527,8 @@
struct atmel_qspi *aq = nor->priv;
struct atmel_qspi_command cmd;
u8 num_mode_cycles, num_dummy_cycles;
- u32 ifr_width;
ssize_t ret;
- switch (nor->flash_read) {
- case SPI_NOR_NORMAL:
- case SPI_NOR_FAST:
- ifr_width = QSPI_IFR_WIDTH_SINGLE_BIT_SPI;
- break;
-
- case SPI_NOR_DUAL:
- ifr_width = QSPI_IFR_WIDTH_DUAL_OUTPUT;
- break;
-
- case SPI_NOR_QUAD:
- ifr_width = QSPI_IFR_WIDTH_QUAD_OUTPUT;
- break;
-
- default:
- return -EINVAL;
- }
-
if (nor->read_dummy >= 2) {
num_mode_cycles = 2;
num_dummy_cycles = nor->read_dummy - 2;
@@ -536,7 +551,7 @@
cmd.rx_buf = read_buf;
cmd.buf_len = len;
ret = atmel_qspi_run_command(aq, &cmd, QSPI_IFR_TFRTYP_TRSFR_READ_MEM,
- ifr_width);
+ nor->read_proto);
return (ret < 0) ? ret : len;
}
@@ -590,6 +605,20 @@
static int atmel_qspi_probe(struct platform_device *pdev)
{
+ const struct spi_nor_hwcaps hwcaps = {
+ .mask = SNOR_HWCAPS_READ |
+ SNOR_HWCAPS_READ_FAST |
+ SNOR_HWCAPS_READ_1_1_2 |
+ SNOR_HWCAPS_READ_1_2_2 |
+ SNOR_HWCAPS_READ_2_2_2 |
+ SNOR_HWCAPS_READ_1_1_4 |
+ SNOR_HWCAPS_READ_1_4_4 |
+ SNOR_HWCAPS_READ_4_4_4 |
+ SNOR_HWCAPS_PP |
+ SNOR_HWCAPS_PP_1_1_4 |
+ SNOR_HWCAPS_PP_1_4_4 |
+ SNOR_HWCAPS_PP_4_4_4,
+ };
struct device_node *child, *np = pdev->dev.of_node;
struct atmel_qspi *aq;
struct resource *res;
@@ -679,7 +708,7 @@
if (err)
goto disable_clk;
- err = spi_nor_scan(nor, NULL, SPI_NOR_QUAD);
+ err = spi_nor_scan(nor, NULL, &hwcaps);
if (err)
goto disable_clk;
diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c
index 9f8102d..53c7d8e 100644
--- a/drivers/mtd/spi-nor/cadence-quadspi.c
+++ b/drivers/mtd/spi-nor/cadence-quadspi.c
@@ -855,15 +855,14 @@
f_pdata->data_width = CQSPI_INST_TYPE_SINGLE;
if (read) {
- switch (nor->flash_read) {
- case SPI_NOR_NORMAL:
- case SPI_NOR_FAST:
+ switch (nor->read_proto) {
+ case SNOR_PROTO_1_1_1:
f_pdata->data_width = CQSPI_INST_TYPE_SINGLE;
break;
- case SPI_NOR_DUAL:
+ case SNOR_PROTO_1_1_2:
f_pdata->data_width = CQSPI_INST_TYPE_DUAL;
break;
- case SPI_NOR_QUAD:
+ case SNOR_PROTO_1_1_4:
f_pdata->data_width = CQSPI_INST_TYPE_QUAD;
break;
default:
@@ -1069,6 +1068,13 @@
static int cqspi_setup_flash(struct cqspi_st *cqspi, struct device_node *np)
{
+ const struct spi_nor_hwcaps hwcaps = {
+ .mask = SNOR_HWCAPS_READ |
+ SNOR_HWCAPS_READ_FAST |
+ SNOR_HWCAPS_READ_1_1_2 |
+ SNOR_HWCAPS_READ_1_1_4 |
+ SNOR_HWCAPS_PP,
+ };
struct platform_device *pdev = cqspi->pdev;
struct device *dev = &pdev->dev;
struct cqspi_flash_pdata *f_pdata;
@@ -1123,7 +1129,7 @@
goto err;
}
- ret = spi_nor_scan(nor, NULL, SPI_NOR_QUAD);
+ ret = spi_nor_scan(nor, NULL, &hwcaps);
if (ret)
goto err;
@@ -1277,7 +1283,7 @@
#define CQSPI_DEV_PM_OPS NULL
#endif
-static struct of_device_id const cqspi_dt_ids[] = {
+static const struct of_device_id cqspi_dt_ids[] = {
{.compatible = "cdns,qspi-nor",},
{ /* end of table */ }
};
diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
index 1476135..f17d224 100644
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
@@ -957,6 +957,10 @@
static int fsl_qspi_probe(struct platform_device *pdev)
{
+ const struct spi_nor_hwcaps hwcaps = {
+ .mask = SNOR_HWCAPS_READ_1_1_4 |
+ SNOR_HWCAPS_PP,
+ };
struct device_node *np = pdev->dev.of_node;
struct device *dev = &pdev->dev;
struct fsl_qspi *q;
@@ -1065,7 +1069,7 @@
/* set the chip address for READID */
fsl_qspi_set_base_addr(q, nor);
- ret = spi_nor_scan(nor, NULL, SPI_NOR_QUAD);
+ ret = spi_nor_scan(nor, NULL, &hwcaps);
if (ret)
goto mutex_failed;
diff --git a/drivers/mtd/spi-nor/hisi-sfc.c b/drivers/mtd/spi-nor/hisi-sfc.c
index a286350..d110683 100644
--- a/drivers/mtd/spi-nor/hisi-sfc.c
+++ b/drivers/mtd/spi-nor/hisi-sfc.c
@@ -120,19 +120,24 @@
(reg & FMC_INT_OP_DONE), 0, FMC_WAIT_TIMEOUT);
}
-static int get_if_type(enum read_mode flash_read)
+static int get_if_type(enum spi_nor_protocol proto)
{
enum hifmc_iftype if_type;
- switch (flash_read) {
- case SPI_NOR_DUAL:
+ switch (proto) {
+ case SNOR_PROTO_1_1_2:
if_type = IF_TYPE_DUAL;
break;
- case SPI_NOR_QUAD:
+ case SNOR_PROTO_1_2_2:
+ if_type = IF_TYPE_DIO;
+ break;
+ case SNOR_PROTO_1_1_4:
if_type = IF_TYPE_QUAD;
break;
- case SPI_NOR_NORMAL:
- case SPI_NOR_FAST:
+ case SNOR_PROTO_1_4_4:
+ if_type = IF_TYPE_QIO;
+ break;
+ case SNOR_PROTO_1_1_1:
default:
if_type = IF_TYPE_STD;
break;
@@ -253,7 +258,10 @@
writel(FMC_DMA_LEN_SET(len), host->regbase + FMC_DMA_LEN);
reg = OP_CFG_FM_CS(priv->chipselect);
- if_type = get_if_type(nor->flash_read);
+ if (op_type == FMC_OP_READ)
+ if_type = get_if_type(nor->read_proto);
+ else
+ if_type = get_if_type(nor->write_proto);
reg |= OP_CFG_MEM_IF_TYPE(if_type);
if (op_type == FMC_OP_READ)
reg |= OP_CFG_DUMMY_NUM(nor->read_dummy >> 3);
@@ -321,6 +329,13 @@
static int hisi_spi_nor_register(struct device_node *np,
struct hifmc_host *host)
{
+ const struct spi_nor_hwcaps hwcaps = {
+ .mask = SNOR_HWCAPS_READ |
+ SNOR_HWCAPS_READ_FAST |
+ SNOR_HWCAPS_READ_1_1_2 |
+ SNOR_HWCAPS_READ_1_1_4 |
+ SNOR_HWCAPS_PP,
+ };
struct device *dev = host->dev;
struct spi_nor *nor;
struct hifmc_priv *priv;
@@ -362,7 +377,7 @@
nor->read = hisi_spi_nor_read;
nor->write = hisi_spi_nor_write;
nor->erase = NULL;
- ret = spi_nor_scan(nor, NULL, SPI_NOR_QUAD);
+ ret = spi_nor_scan(nor, NULL, &hwcaps);
if (ret)
return ret;
diff --git a/drivers/mtd/spi-nor/intel-spi.c b/drivers/mtd/spi-nor/intel-spi.c
index 986a3d0..8a596bf 100644
--- a/drivers/mtd/spi-nor/intel-spi.c
+++ b/drivers/mtd/spi-nor/intel-spi.c
@@ -715,6 +715,11 @@
struct intel_spi *intel_spi_probe(struct device *dev,
struct resource *mem, const struct intel_spi_boardinfo *info)
{
+ const struct spi_nor_hwcaps hwcaps = {
+ .mask = SNOR_HWCAPS_READ |
+ SNOR_HWCAPS_READ_FAST |
+ SNOR_HWCAPS_PP,
+ };
struct mtd_partition part;
struct intel_spi *ispi;
int ret;
@@ -746,7 +751,7 @@
ispi->nor.write = intel_spi_write;
ispi->nor.erase = intel_spi_erase;
- ret = spi_nor_scan(&ispi->nor, NULL, SPI_NOR_NORMAL);
+ ret = spi_nor_scan(&ispi->nor, NULL, &hwcaps);
if (ret) {
dev_info(dev, "failed to locate the chip\n");
return ERR_PTR(ret);
diff --git a/drivers/mtd/spi-nor/mtk-quadspi.c b/drivers/mtd/spi-nor/mtk-quadspi.c
index b637770..8a20ec4 100644
--- a/drivers/mtd/spi-nor/mtk-quadspi.c
+++ b/drivers/mtd/spi-nor/mtk-quadspi.c
@@ -123,20 +123,20 @@
{
struct spi_nor *nor = &mt8173_nor->nor;
- switch (nor->flash_read) {
- case SPI_NOR_FAST:
+ switch (nor->read_proto) {
+ case SNOR_PROTO_1_1_1:
writeb(nor->read_opcode, mt8173_nor->base +
MTK_NOR_PRGDATA3_REG);
writeb(MTK_NOR_FAST_READ, mt8173_nor->base +
MTK_NOR_CFG1_REG);
break;
- case SPI_NOR_DUAL:
+ case SNOR_PROTO_1_1_2:
writeb(nor->read_opcode, mt8173_nor->base +
MTK_NOR_PRGDATA3_REG);
writeb(MTK_NOR_DUAL_READ_EN, mt8173_nor->base +
MTK_NOR_DUAL_REG);
break;
- case SPI_NOR_QUAD:
+ case SNOR_PROTO_1_1_4:
writeb(nor->read_opcode, mt8173_nor->base +
MTK_NOR_PRGDATA4_REG);
writeb(MTK_NOR_QUAD_READ_EN, mt8173_nor->base +
@@ -408,6 +408,11 @@
static int mtk_nor_init(struct mt8173_nor *mt8173_nor,
struct device_node *flash_node)
{
+ const struct spi_nor_hwcaps hwcaps = {
+ .mask = SNOR_HWCAPS_READ_FAST |
+ SNOR_HWCAPS_READ_1_1_2 |
+ SNOR_HWCAPS_PP,
+ };
int ret;
struct spi_nor *nor;
@@ -426,7 +431,7 @@
nor->write_reg = mt8173_nor_write_reg;
nor->mtd.name = "mtk_nor";
/* initialized with NULL */
- ret = spi_nor_scan(nor, NULL, SPI_NOR_DUAL);
+ ret = spi_nor_scan(nor, NULL, &hwcaps);
if (ret)
return ret;
diff --git a/drivers/mtd/spi-nor/nxp-spifi.c b/drivers/mtd/spi-nor/nxp-spifi.c
index 73a14f4..1537421 100644
--- a/drivers/mtd/spi-nor/nxp-spifi.c
+++ b/drivers/mtd/spi-nor/nxp-spifi.c
@@ -240,13 +240,12 @@
static int nxp_spifi_setup_memory_cmd(struct nxp_spifi *spifi)
{
- switch (spifi->nor.flash_read) {
- case SPI_NOR_NORMAL:
- case SPI_NOR_FAST:
+ switch (spifi->nor.read_proto) {
+ case SNOR_PROTO_1_1_1:
spifi->mcmd = SPIFI_CMD_FIELDFORM_ALL_SERIAL;
break;
- case SPI_NOR_DUAL:
- case SPI_NOR_QUAD:
+ case SNOR_PROTO_1_1_2:
+ case SNOR_PROTO_1_1_4:
spifi->mcmd = SPIFI_CMD_FIELDFORM_QUAD_DUAL_DATA;
break;
default:
@@ -274,7 +273,11 @@
static int nxp_spifi_setup_flash(struct nxp_spifi *spifi,
struct device_node *np)
{
- enum read_mode flash_read;
+ struct spi_nor_hwcaps hwcaps = {
+ .mask = SNOR_HWCAPS_READ |
+ SNOR_HWCAPS_READ_FAST |
+ SNOR_HWCAPS_PP,
+ };
u32 ctrl, property;
u16 mode = 0;
int ret;
@@ -308,13 +311,12 @@
if (mode & SPI_RX_DUAL) {
ctrl |= SPIFI_CTRL_DUAL;
- flash_read = SPI_NOR_DUAL;
+ hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2;
} else if (mode & SPI_RX_QUAD) {
ctrl &= ~SPIFI_CTRL_DUAL;
- flash_read = SPI_NOR_QUAD;
+ hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4;
} else {
ctrl |= SPIFI_CTRL_DUAL;
- flash_read = SPI_NOR_NORMAL;
}
switch (mode & (SPI_CPHA | SPI_CPOL)) {
@@ -351,7 +353,7 @@
*/
nxp_spifi_dummy_id_read(&spifi->nor);
- ret = spi_nor_scan(&spifi->nor, NULL, flash_read);
+ ret = spi_nor_scan(&spifi->nor, NULL, &hwcaps);
if (ret) {
dev_err(spifi->dev, "device scan failed\n");
return ret;
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index dea8c9c..1413828 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -150,24 +150,6 @@
}
/*
- * Dummy Cycle calculation for different type of read.
- * It can be used to support more commands with
- * different dummy cycle requirements.
- */
-static inline int spi_nor_read_dummy_cycles(struct spi_nor *nor)
-{
- switch (nor->flash_read) {
- case SPI_NOR_FAST:
- case SPI_NOR_DUAL:
- case SPI_NOR_QUAD:
- return 8;
- case SPI_NOR_NORMAL:
- return 0;
- }
- return 0;
-}
-
-/*
* Write status register 1 byte
* Returns negative if error occurred.
*/
@@ -221,6 +203,10 @@
{ SPINOR_OP_READ_1_2_2, SPINOR_OP_READ_1_2_2_4B },
{ SPINOR_OP_READ_1_1_4, SPINOR_OP_READ_1_1_4_4B },
{ SPINOR_OP_READ_1_4_4, SPINOR_OP_READ_1_4_4_4B },
+
+ { SPINOR_OP_READ_1_1_1_DTR, SPINOR_OP_READ_1_1_1_DTR_4B },
+ { SPINOR_OP_READ_1_2_2_DTR, SPINOR_OP_READ_1_2_2_DTR_4B },
+ { SPINOR_OP_READ_1_4_4_DTR, SPINOR_OP_READ_1_4_4_DTR_4B },
};
return spi_nor_convert_opcode(opcode, spi_nor_3to4_read,
@@ -1022,10 +1008,12 @@
{ "mx25u6435f", INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
- { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, 0) },
+ { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) },
{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
- { "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_QUAD_READ) },
+ { "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "mx66u51235f", INFO(0xc2253a, 0, 64 * 1024, 1024, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
+ { "mx66l1g45g", INFO(0xc2201b, 0, 64 * 1024, 2048, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ "mx66l1g55g", INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) },
/* Micron */
@@ -1036,7 +1024,7 @@
{ "n25q064a", INFO(0x20bb17, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_QUAD_READ) },
{ "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ) },
{ "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ) },
- { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_QUAD_READ) },
+ { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ "n25q256ax1", INFO(0x20bb19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_QUAD_READ) },
{ "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
{ "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
@@ -1076,6 +1064,7 @@
{ "s25fl164k", INFO(0x014017, 0, 64 * 1024, 128, SECT_4K) },
{ "s25fl204k", INFO(0x014013, 0, 64 * 1024, 8, SECT_4K | SPI_NOR_DUAL_READ) },
{ "s25fl208k", INFO(0x014014, 0, 64 * 1024, 16, SECT_4K | SPI_NOR_DUAL_READ) },
+ { "s25fl064l", INFO(0x016017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
/* SST -- large erase sizes are "overlays", "sectors" are 4K */
{ "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) },
@@ -1159,7 +1148,9 @@
{ "w25q80", INFO(0xef5014, 0, 64 * 1024, 16, SECT_4K) },
{ "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) },
{ "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
- { "w25q256", INFO(0xef4019, 0, 64 * 1024, 512, SECT_4K) },
+ { "w25q256", INFO(0xef4019, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024,
+ SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_DUAL_READ) },
/* Catalyst / On Semiconductor -- non-JEDEC */
{ "cat25c11", CAT25_INFO( 16, 8, 16, 1, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
@@ -1403,8 +1394,9 @@
write_sr(nor, val | SR_QUAD_EN_MX);
- if (spi_nor_wait_till_ready(nor))
- return 1;
+ ret = spi_nor_wait_till_ready(nor);
+ if (ret)
+ return ret;
ret = read_sr(nor);
if (!(ret > 0 && (ret & SR_QUAD_EN_MX))) {
@@ -1460,30 +1452,6 @@
return 0;
}
-static int set_quad_mode(struct spi_nor *nor, const struct flash_info *info)
-{
- int status;
-
- switch (JEDEC_MFR(info)) {
- case SNOR_MFR_MACRONIX:
- status = macronix_quad_enable(nor);
- if (status) {
- dev_err(nor->dev, "Macronix quad-read not enabled\n");
- return -EINVAL;
- }
- return status;
- case SNOR_MFR_MICRON:
- return 0;
- default:
- status = spansion_quad_enable(nor);
- if (status) {
- dev_err(nor->dev, "Spansion quad-read not enabled\n");
- return -EINVAL;
- }
- return status;
- }
-}
-
static int spi_nor_check(struct spi_nor *nor)
{
if (!nor->dev || !nor->read || !nor->write ||
@@ -1536,8 +1504,349 @@
return 0;
}
-int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
+struct spi_nor_read_command {
+ u8 num_mode_clocks;
+ u8 num_wait_states;
+ u8 opcode;
+ enum spi_nor_protocol proto;
+};
+
+struct spi_nor_pp_command {
+ u8 opcode;
+ enum spi_nor_protocol proto;
+};
+
+enum spi_nor_read_command_index {
+ SNOR_CMD_READ,
+ SNOR_CMD_READ_FAST,
+ SNOR_CMD_READ_1_1_1_DTR,
+
+ /* Dual SPI */
+ SNOR_CMD_READ_1_1_2,
+ SNOR_CMD_READ_1_2_2,
+ SNOR_CMD_READ_2_2_2,
+ SNOR_CMD_READ_1_2_2_DTR,
+
+ /* Quad SPI */
+ SNOR_CMD_READ_1_1_4,
+ SNOR_CMD_READ_1_4_4,
+ SNOR_CMD_READ_4_4_4,
+ SNOR_CMD_READ_1_4_4_DTR,
+
+ /* Octo SPI */
+ SNOR_CMD_READ_1_1_8,
+ SNOR_CMD_READ_1_8_8,
+ SNOR_CMD_READ_8_8_8,
+ SNOR_CMD_READ_1_8_8_DTR,
+
+ SNOR_CMD_READ_MAX
+};
+
+enum spi_nor_pp_command_index {
+ SNOR_CMD_PP,
+
+ /* Quad SPI */
+ SNOR_CMD_PP_1_1_4,
+ SNOR_CMD_PP_1_4_4,
+ SNOR_CMD_PP_4_4_4,
+
+ /* Octo SPI */
+ SNOR_CMD_PP_1_1_8,
+ SNOR_CMD_PP_1_8_8,
+ SNOR_CMD_PP_8_8_8,
+
+ SNOR_CMD_PP_MAX
+};
+
+struct spi_nor_flash_parameter {
+ u64 size;
+ u32 page_size;
+
+ struct spi_nor_hwcaps hwcaps;
+ struct spi_nor_read_command reads[SNOR_CMD_READ_MAX];
+ struct spi_nor_pp_command page_programs[SNOR_CMD_PP_MAX];
+
+ int (*quad_enable)(struct spi_nor *nor);
+};
+
+static void
+spi_nor_set_read_settings(struct spi_nor_read_command *read,
+ u8 num_mode_clocks,
+ u8 num_wait_states,
+ u8 opcode,
+ enum spi_nor_protocol proto)
{
+ read->num_mode_clocks = num_mode_clocks;
+ read->num_wait_states = num_wait_states;
+ read->opcode = opcode;
+ read->proto = proto;
+}
+
+static void
+spi_nor_set_pp_settings(struct spi_nor_pp_command *pp,
+ u8 opcode,
+ enum spi_nor_protocol proto)
+{
+ pp->opcode = opcode;
+ pp->proto = proto;
+}
+
+static int spi_nor_init_params(struct spi_nor *nor,
+ const struct flash_info *info,
+ struct spi_nor_flash_parameter *params)
+{
+ /* Set legacy flash parameters as default. */
+ memset(params, 0, sizeof(*params));
+
+ /* Set SPI NOR sizes. */
+ params->size = info->sector_size * info->n_sectors;
+ params->page_size = info->page_size;
+
+ /* (Fast) Read settings. */
+ params->hwcaps.mask |= SNOR_HWCAPS_READ;
+ spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ],
+ 0, 0, SPINOR_OP_READ,
+ SNOR_PROTO_1_1_1);
+
+ if (!(info->flags & SPI_NOR_NO_FR)) {
+ params->hwcaps.mask |= SNOR_HWCAPS_READ_FAST;
+ spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_FAST],
+ 0, 8, SPINOR_OP_READ_FAST,
+ SNOR_PROTO_1_1_1);
+ }
+
+ if (info->flags & SPI_NOR_DUAL_READ) {
+ params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2;
+ spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_1_1_2],
+ 0, 8, SPINOR_OP_READ_1_1_2,
+ SNOR_PROTO_1_1_2);
+ }
+
+ if (info->flags & SPI_NOR_QUAD_READ) {
+ params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4;
+ spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_1_1_4],
+ 0, 8, SPINOR_OP_READ_1_1_4,
+ SNOR_PROTO_1_1_4);
+ }
+
+ /* Page Program settings. */
+ params->hwcaps.mask |= SNOR_HWCAPS_PP;
+ spi_nor_set_pp_settings(¶ms->page_programs[SNOR_CMD_PP],
+ SPINOR_OP_PP, SNOR_PROTO_1_1_1);
+
+ /* Select the procedure to set the Quad Enable bit. */
+ if (params->hwcaps.mask & (SNOR_HWCAPS_READ_QUAD |
+ SNOR_HWCAPS_PP_QUAD)) {
+ switch (JEDEC_MFR(info)) {
+ case SNOR_MFR_MACRONIX:
+ params->quad_enable = macronix_quad_enable;
+ break;
+
+ case SNOR_MFR_MICRON:
+ break;
+
+ default:
+ params->quad_enable = spansion_quad_enable;
+ break;
+ }
+ }
+
+ return 0;
+}
+
+static int spi_nor_hwcaps2cmd(u32 hwcaps, const int table[][2], size_t size)
+{
+ size_t i;
+
+ for (i = 0; i < size; i++)
+ if (table[i][0] == (int)hwcaps)
+ return table[i][1];
+
+ return -EINVAL;
+}
+
+static int spi_nor_hwcaps_read2cmd(u32 hwcaps)
+{
+ static const int hwcaps_read2cmd[][2] = {
+ { SNOR_HWCAPS_READ, SNOR_CMD_READ },
+ { SNOR_HWCAPS_READ_FAST, SNOR_CMD_READ_FAST },
+ { SNOR_HWCAPS_READ_1_1_1_DTR, SNOR_CMD_READ_1_1_1_DTR },
+ { SNOR_HWCAPS_READ_1_1_2, SNOR_CMD_READ_1_1_2 },
+ { SNOR_HWCAPS_READ_1_2_2, SNOR_CMD_READ_1_2_2 },
+ { SNOR_HWCAPS_READ_2_2_2, SNOR_CMD_READ_2_2_2 },
+ { SNOR_HWCAPS_READ_1_2_2_DTR, SNOR_CMD_READ_1_2_2_DTR },
+ { SNOR_HWCAPS_READ_1_1_4, SNOR_CMD_READ_1_1_4 },
+ { SNOR_HWCAPS_READ_1_4_4, SNOR_CMD_READ_1_4_4 },
+ { SNOR_HWCAPS_READ_4_4_4, SNOR_CMD_READ_4_4_4 },
+ { SNOR_HWCAPS_READ_1_4_4_DTR, SNOR_CMD_READ_1_4_4_DTR },
+ { SNOR_HWCAPS_READ_1_1_8, SNOR_CMD_READ_1_1_8 },
+ { SNOR_HWCAPS_READ_1_8_8, SNOR_CMD_READ_1_8_8 },
+ { SNOR_HWCAPS_READ_8_8_8, SNOR_CMD_READ_8_8_8 },
+ { SNOR_HWCAPS_READ_1_8_8_DTR, SNOR_CMD_READ_1_8_8_DTR },
+ };
+
+ return spi_nor_hwcaps2cmd(hwcaps, hwcaps_read2cmd,
+ ARRAY_SIZE(hwcaps_read2cmd));
+}
+
+static int spi_nor_hwcaps_pp2cmd(u32 hwcaps)
+{
+ static const int hwcaps_pp2cmd[][2] = {
+ { SNOR_HWCAPS_PP, SNOR_CMD_PP },
+ { SNOR_HWCAPS_PP_1_1_4, SNOR_CMD_PP_1_1_4 },
+ { SNOR_HWCAPS_PP_1_4_4, SNOR_CMD_PP_1_4_4 },
+ { SNOR_HWCAPS_PP_4_4_4, SNOR_CMD_PP_4_4_4 },
+ { SNOR_HWCAPS_PP_1_1_8, SNOR_CMD_PP_1_1_8 },
+ { SNOR_HWCAPS_PP_1_8_8, SNOR_CMD_PP_1_8_8 },
+ { SNOR_HWCAPS_PP_8_8_8, SNOR_CMD_PP_8_8_8 },
+ };
+
+ return spi_nor_hwcaps2cmd(hwcaps, hwcaps_pp2cmd,
+ ARRAY_SIZE(hwcaps_pp2cmd));
+}
+
+static int spi_nor_select_read(struct spi_nor *nor,
+ const struct spi_nor_flash_parameter *params,
+ u32 shared_hwcaps)
+{
+ int cmd, best_match = fls(shared_hwcaps & SNOR_HWCAPS_READ_MASK) - 1;
+ const struct spi_nor_read_command *read;
+
+ if (best_match < 0)
+ return -EINVAL;
+
+ cmd = spi_nor_hwcaps_read2cmd(BIT(best_match));
+ if (cmd < 0)
+ return -EINVAL;
+
+ read = ¶ms->reads[cmd];
+ nor->read_opcode = read->opcode;
+ nor->read_proto = read->proto;
+
+ /*
+ * In the spi-nor framework, we don't need to make the difference
+ * between mode clock cycles and wait state clock cycles.
+ * Indeed, the value of the mode clock cycles is used by a QSPI
+ * flash memory to know whether it should enter or leave its 0-4-4
+ * (Continuous Read / XIP) mode.
+ * eXecution In Place is out of the scope of the mtd sub-system.
+ * Hence we choose to merge both mode and wait state clock cycles
+ * into the so called dummy clock cycles.
+ */
+ nor->read_dummy = read->num_mode_clocks + read->num_wait_states;
+ return 0;
+}
+
+static int spi_nor_select_pp(struct spi_nor *nor,
+ const struct spi_nor_flash_parameter *params,
+ u32 shared_hwcaps)
+{
+ int cmd, best_match = fls(shared_hwcaps & SNOR_HWCAPS_PP_MASK) - 1;
+ const struct spi_nor_pp_command *pp;
+
+ if (best_match < 0)
+ return -EINVAL;
+
+ cmd = spi_nor_hwcaps_pp2cmd(BIT(best_match));
+ if (cmd < 0)
+ return -EINVAL;
+
+ pp = ¶ms->page_programs[cmd];
+ nor->program_opcode = pp->opcode;
+ nor->write_proto = pp->proto;
+ return 0;
+}
+
+static int spi_nor_select_erase(struct spi_nor *nor,
+ const struct flash_info *info)
+{
+ struct mtd_info *mtd = &nor->mtd;
+
+#ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
+ /* prefer "small sector" erase if possible */
+ if (info->flags & SECT_4K) {
+ nor->erase_opcode = SPINOR_OP_BE_4K;
+ mtd->erasesize = 4096;
+ } else if (info->flags & SECT_4K_PMC) {
+ nor->erase_opcode = SPINOR_OP_BE_4K_PMC;
+ mtd->erasesize = 4096;
+ } else
+#endif
+ {
+ nor->erase_opcode = SPINOR_OP_SE;
+ mtd->erasesize = info->sector_size;
+ }
+ return 0;
+}
+
+static int spi_nor_setup(struct spi_nor *nor, const struct flash_info *info,
+ const struct spi_nor_flash_parameter *params,
+ const struct spi_nor_hwcaps *hwcaps)
+{
+ u32 ignored_mask, shared_mask;
+ bool enable_quad_io;
+ int err;
+
+ /*
+ * Keep only the hardware capabilities supported by both the SPI
+ * controller and the SPI flash memory.
+ */
+ shared_mask = hwcaps->mask & params->hwcaps.mask;
+
+ /* SPI n-n-n protocols are not supported yet. */
+ ignored_mask = (SNOR_HWCAPS_READ_2_2_2 |
+ SNOR_HWCAPS_READ_4_4_4 |
+ SNOR_HWCAPS_READ_8_8_8 |
+ SNOR_HWCAPS_PP_4_4_4 |
+ SNOR_HWCAPS_PP_8_8_8);
+ if (shared_mask & ignored_mask) {
+ dev_dbg(nor->dev,
+ "SPI n-n-n protocols are not supported yet.\n");
+ shared_mask &= ~ignored_mask;
+ }
+
+ /* Select the (Fast) Read command. */
+ err = spi_nor_select_read(nor, params, shared_mask);
+ if (err) {
+ dev_err(nor->dev,
+ "can't select read settings supported by both the SPI controller and memory.\n");
+ return err;
+ }
+
+ /* Select the Page Program command. */
+ err = spi_nor_select_pp(nor, params, shared_mask);
+ if (err) {
+ dev_err(nor->dev,
+ "can't select write settings supported by both the SPI controller and memory.\n");
+ return err;
+ }
+
+ /* Select the Sector Erase command. */
+ err = spi_nor_select_erase(nor, info);
+ if (err) {
+ dev_err(nor->dev,
+ "can't select erase settings supported by both the SPI controller and memory.\n");
+ return err;
+ }
+
+ /* Enable Quad I/O if needed. */
+ enable_quad_io = (spi_nor_get_protocol_width(nor->read_proto) == 4 ||
+ spi_nor_get_protocol_width(nor->write_proto) == 4);
+ if (enable_quad_io && params->quad_enable) {
+ err = params->quad_enable(nor);
+ if (err) {
+ dev_err(nor->dev, "quad mode not supported\n");
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+int spi_nor_scan(struct spi_nor *nor, const char *name,
+ const struct spi_nor_hwcaps *hwcaps)
+{
+ struct spi_nor_flash_parameter params;
const struct flash_info *info = NULL;
struct device *dev = nor->dev;
struct mtd_info *mtd = &nor->mtd;
@@ -1549,6 +1858,11 @@
if (ret)
return ret;
+ /* Reset SPI protocol for all commands. */
+ nor->reg_proto = SNOR_PROTO_1_1_1;
+ nor->read_proto = SNOR_PROTO_1_1_1;
+ nor->write_proto = SNOR_PROTO_1_1_1;
+
if (name)
info = spi_nor_match_id(name);
/* Try to auto-detect if chip name wasn't specified or not found */
@@ -1591,6 +1905,11 @@
if (info->flags & SPI_S3AN)
nor->flags |= SNOR_F_READY_XSR_RDY;
+ /* Parse the Serial Flash Discoverable Parameters table. */
+ ret = spi_nor_init_params(nor, info, ¶ms);
+ if (ret)
+ return ret;
+
/*
* Atmel, SST, Intel/Numonyx, and others serial NOR tend to power up
* with the software protection bits set
@@ -1611,7 +1930,7 @@
mtd->type = MTD_NORFLASH;
mtd->writesize = 1;
mtd->flags = MTD_CAP_NORFLASH;
- mtd->size = info->sector_size * info->n_sectors;
+ mtd->size = params.size;
mtd->_erase = spi_nor_erase;
mtd->_read = spi_nor_read;
@@ -1642,75 +1961,38 @@
if (info->flags & NO_CHIP_ERASE)
nor->flags |= SNOR_F_NO_OP_CHIP_ERASE;
-#ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
- /* prefer "small sector" erase if possible */
- if (info->flags & SECT_4K) {
- nor->erase_opcode = SPINOR_OP_BE_4K;
- mtd->erasesize = 4096;
- } else if (info->flags & SECT_4K_PMC) {
- nor->erase_opcode = SPINOR_OP_BE_4K_PMC;
- mtd->erasesize = 4096;
- } else
-#endif
- {
- nor->erase_opcode = SPINOR_OP_SE;
- mtd->erasesize = info->sector_size;
- }
-
if (info->flags & SPI_NOR_NO_ERASE)
mtd->flags |= MTD_NO_ERASE;
mtd->dev.parent = dev;
- nor->page_size = info->page_size;
+ nor->page_size = params.page_size;
mtd->writebufsize = nor->page_size;
if (np) {
/* If we were instantiated by DT, use it */
if (of_property_read_bool(np, "m25p,fast-read"))
- nor->flash_read = SPI_NOR_FAST;
+ params.hwcaps.mask |= SNOR_HWCAPS_READ_FAST;
else
- nor->flash_read = SPI_NOR_NORMAL;
+ params.hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST;
} else {
/* If we weren't instantiated by DT, default to fast-read */
- nor->flash_read = SPI_NOR_FAST;
+ params.hwcaps.mask |= SNOR_HWCAPS_READ_FAST;
}
/* Some devices cannot do fast-read, no matter what DT tells us */
if (info->flags & SPI_NOR_NO_FR)
- nor->flash_read = SPI_NOR_NORMAL;
+ params.hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST;
- /* Quad/Dual-read mode takes precedence over fast/normal */
- if (mode == SPI_NOR_QUAD && info->flags & SPI_NOR_QUAD_READ) {
- ret = set_quad_mode(nor, info);
- if (ret) {
- dev_err(dev, "quad mode not supported\n");
- return ret;
- }
- nor->flash_read = SPI_NOR_QUAD;
- } else if (mode == SPI_NOR_DUAL && info->flags & SPI_NOR_DUAL_READ) {
- nor->flash_read = SPI_NOR_DUAL;
- }
-
- /* Default commands */
- switch (nor->flash_read) {
- case SPI_NOR_QUAD:
- nor->read_opcode = SPINOR_OP_READ_1_1_4;
- break;
- case SPI_NOR_DUAL:
- nor->read_opcode = SPINOR_OP_READ_1_1_2;
- break;
- case SPI_NOR_FAST:
- nor->read_opcode = SPINOR_OP_READ_FAST;
- break;
- case SPI_NOR_NORMAL:
- nor->read_opcode = SPINOR_OP_READ;
- break;
- default:
- dev_err(dev, "No Read opcode defined\n");
- return -EINVAL;
- }
-
- nor->program_opcode = SPINOR_OP_PP;
+ /*
+ * Configure the SPI memory:
+ * - select op codes for (Fast) Read, Page Program and Sector Erase.
+ * - set the number of dummy cycles (mode cycles + wait states).
+ * - set the SPI protocols for register and memory accesses.
+ * - set the Quad Enable bit if needed (required by SPI x-y-4 protos).
+ */
+ ret = spi_nor_setup(nor, info, ¶ms, hwcaps);
+ if (ret)
+ return ret;
if (info->addr_width)
nor->addr_width = info->addr_width;
@@ -1732,8 +2014,6 @@
return -EINVAL;
}
- nor->read_dummy = spi_nor_read_dummy_cycles(nor);
-
if (info->flags & SPI_S3AN) {
ret = s3an_nor_scan(info, nor);
if (ret)
diff --git a/drivers/mtd/spi-nor/stm32-quadspi.c b/drivers/mtd/spi-nor/stm32-quadspi.c
index ae45f81..86c0931 100644
--- a/drivers/mtd/spi-nor/stm32-quadspi.c
+++ b/drivers/mtd/spi-nor/stm32-quadspi.c
@@ -19,6 +19,7 @@
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/reset.h>
+#include <linux/sizes.h>
#define QUADSPI_CR 0x00
#define CR_EN BIT(0)
@@ -192,15 +193,15 @@
cmd->framemode = CCR_IMODE_1;
if (read) {
- switch (nor->flash_read) {
- case SPI_NOR_NORMAL:
- case SPI_NOR_FAST:
+ switch (nor->read_proto) {
+ default:
+ case SNOR_PROTO_1_1_1:
dmode = CCR_DMODE_1;
break;
- case SPI_NOR_DUAL:
+ case SNOR_PROTO_1_1_2:
dmode = CCR_DMODE_2;
break;
- case SPI_NOR_QUAD:
+ case SNOR_PROTO_1_1_4:
dmode = CCR_DMODE_4;
break;
}
@@ -375,7 +376,7 @@
struct stm32_qspi_cmd cmd;
int err;
- dev_dbg(qspi->dev, "read(%#.2x): buf:%p from:%#.8x len:%#x\n",
+ dev_dbg(qspi->dev, "read(%#.2x): buf:%p from:%#.8x len:%#zx\n",
nor->read_opcode, buf, (u32)from, len);
memset(&cmd, 0, sizeof(cmd));
@@ -402,7 +403,7 @@
struct stm32_qspi_cmd cmd;
int err;
- dev_dbg(dev, "write(%#.2x): buf:%p to:%#.8x len:%#x\n",
+ dev_dbg(dev, "write(%#.2x): buf:%p to:%#.8x len:%#zx\n",
nor->program_opcode, buf, (u32)to, len);
memset(&cmd, 0, sizeof(cmd));
@@ -480,7 +481,12 @@
static int stm32_qspi_flash_setup(struct stm32_qspi *qspi,
struct device_node *np)
{
- u32 width, flash_read, presc, cs_num, max_rate = 0;
+ struct spi_nor_hwcaps hwcaps = {
+ .mask = SNOR_HWCAPS_READ |
+ SNOR_HWCAPS_READ_FAST |
+ SNOR_HWCAPS_PP,
+ };
+ u32 width, presc, cs_num, max_rate = 0;
struct stm32_qspi_flash *flash;
struct mtd_info *mtd;
int ret;
@@ -499,12 +505,10 @@
width = 1;
if (width == 4)
- flash_read = SPI_NOR_QUAD;
+ hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4;
else if (width == 2)
- flash_read = SPI_NOR_DUAL;
- else if (width == 1)
- flash_read = SPI_NOR_NORMAL;
- else
+ hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2;
+ else if (width != 1)
return -EINVAL;
flash = &qspi->flash[cs_num];
@@ -539,7 +543,7 @@
*/
flash->fsize = FSIZE_VAL(SZ_1K);
- ret = spi_nor_scan(&flash->nor, NULL, flash_read);
+ ret = spi_nor_scan(&flash->nor, NULL, &hwcaps);
if (ret) {
dev_err(qspi->dev, "device scan failed\n");
return ret;
diff --git a/drivers/mtd/tests/subpagetest.c b/drivers/mtd/tests/subpagetest.c
index aecc6ce..fa2519a 100644
--- a/drivers/mtd/tests/subpagetest.c
+++ b/drivers/mtd/tests/subpagetest.c
@@ -102,7 +102,7 @@
if (unlikely(err || written != subpgsize * k)) {
pr_err("error: write failed at %#llx\n",
(long long)addr);
- if (written != subpgsize) {
+ if (written != subpgsize * k) {
pr_err(" write size: %#x\n",
subpgsize * k);
pr_err(" written: %#08zx\n",
diff --git a/drivers/mux/Kconfig b/drivers/mux/Kconfig
index 7c754a0..19e4e90 100644
--- a/drivers/mux/Kconfig
+++ b/drivers/mux/Kconfig
@@ -2,20 +2,11 @@
# Multiplexer devices
#
-menuconfig MULTIPLEXER
- tristate "Multiplexer subsystem"
- help
- Multiplexer controller subsystem. Multiplexers are used in a
- variety of settings, and this subsystem abstracts their use
- so that the rest of the kernel sees a common interface. When
- multiple parallel multiplexers are controlled by one single
- multiplexer controller, this subsystem also coordinates the
- multiplexer accesses.
+config MULTIPLEXER
+ tristate
- To compile the subsystem as a module, choose M here: the module will
- be called mux-core.
-
-if MULTIPLEXER
+menu "Multiplexer drivers"
+ depends on MULTIPLEXER
config MUX_ADG792A
tristate "Analog Devices ADG792A/ADG792G Multiplexers"
@@ -56,4 +47,4 @@
To compile the driver as a module, choose M here: the module will
be called mux-mmio.
-endif
+endmenu
diff --git a/drivers/mux/mux-core.c b/drivers/mux/mux-core.c
index 90b8995..2fe96c4 100644
--- a/drivers/mux/mux-core.c
+++ b/drivers/mux/mux-core.c
@@ -46,7 +46,7 @@
static void __exit mux_exit(void)
{
- class_register(&mux_class);
+ class_unregister(&mux_class);
ida_destroy(&mux_ida);
}
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 14ff622..9bee6c1 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2050,6 +2050,7 @@
continue;
bond_propose_link_state(slave, BOND_LINK_FAIL);
+ commit++;
slave->delay = bond->params.downdelay;
if (slave->delay) {
netdev_info(bond->dev, "link status down for %sinterface %s, disabling it in %d ms\n",
@@ -2088,6 +2089,7 @@
continue;
bond_propose_link_state(slave, BOND_LINK_BACK);
+ commit++;
slave->delay = bond->params.updelay;
if (slave->delay) {
@@ -4596,7 +4598,7 @@
}
ad_user_port_key = valptr->value;
- if (bond_mode == BOND_MODE_TLB) {
+ if ((bond_mode == BOND_MODE_TLB) || (bond_mode == BOND_MODE_ALB)) {
bond_opt_initstr(&newval, "default");
valptr = bond_opt_parse(bond_opt_get(BOND_OPT_TLB_DYNAMIC_LB),
&newval);
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index e68d368..7f36d3e 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1665,6 +1665,7 @@
.dev_name = "BCM53125",
.vlans = 4096,
.enabled_ports = 0xff,
+ .arl_entries = 4,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 53b0881..5bcdd33 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -3178,6 +3178,7 @@
.port_set_jumbo_size = mv88e6165_port_set_jumbo_size,
.port_egress_rate_limiting = mv88e6097_port_egress_rate_limiting,
.port_pause_limit = mv88e6390_port_pause_limit,
+ .port_set_cmode = mv88e6390x_port_set_cmode,
.port_disable_learn_limit = mv88e6xxx_port_disable_learn_limit,
.port_disable_pri_override = mv88e6xxx_port_disable_pri_override,
.stats_snapshot = mv88e6390_g1_stats_snapshot,
diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
index d3906f6..86058a9 100644
--- a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
+++ b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
@@ -1785,16 +1785,18 @@
xgene_enet_gpiod_get(pdata);
- pdata->clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(pdata->clk)) {
- /* Abort if the clock is defined but couldn't be retrived.
- * Always abort if the clock is missing on DT system as
- * the driver can't cope with this case.
- */
- if (PTR_ERR(pdata->clk) != -ENOENT || dev->of_node)
- return PTR_ERR(pdata->clk);
- /* Firmware may have set up the clock already. */
- dev_info(dev, "clocks have been setup already\n");
+ if (pdata->phy_mode != PHY_INTERFACE_MODE_SGMII) {
+ pdata->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(pdata->clk)) {
+ /* Abort if the clock is defined but couldn't be
+ * retrived. Always abort if the clock is missing on
+ * DT system as the driver can't cope with this case.
+ */
+ if (PTR_ERR(pdata->clk) != -ENOENT || dev->of_node)
+ return PTR_ERR(pdata->clk);
+ /* Firmware may have set up the clock already. */
+ dev_info(dev, "clocks have been setup already\n");
+ }
}
if (pdata->phy_mode != PHY_INTERFACE_MODE_XGMII)
diff --git a/drivers/net/ethernet/aurora/nb8800.c b/drivers/net/ethernet/aurora/nb8800.c
index 041cfb7..e941595 100644
--- a/drivers/net/ethernet/aurora/nb8800.c
+++ b/drivers/net/ethernet/aurora/nb8800.c
@@ -609,7 +609,7 @@
mac_mode |= HALF_DUPLEX;
if (gigabit) {
- if (priv->phy_mode == PHY_INTERFACE_MODE_RGMII)
+ if (phy_interface_is_rgmii(dev->phydev))
mac_mode |= RGMII_MODE;
mac_mode |= GMAC_MODE;
@@ -1268,11 +1268,10 @@
break;
case PHY_INTERFACE_MODE_RGMII:
- pad_mode = PAD_MODE_RGMII;
- break;
-
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
case PHY_INTERFACE_MODE_RGMII_TXID:
- pad_mode = PAD_MODE_RGMII | PAD_MODE_GTX_CLK_DELAY;
+ pad_mode = PAD_MODE_RGMII;
break;
default:
diff --git a/drivers/net/ethernet/broadcom/bgmac-platform.c b/drivers/net/ethernet/broadcom/bgmac-platform.c
index 73aca97..d937083d 100644
--- a/drivers/net/ethernet/broadcom/bgmac-platform.c
+++ b/drivers/net/ethernet/broadcom/bgmac-platform.c
@@ -50,11 +50,14 @@
static void platform_bgmac_idm_write(struct bgmac *bgmac, u16 offset, u32 value)
{
- return writel(value, bgmac->plat.idm_base + offset);
+ writel(value, bgmac->plat.idm_base + offset);
}
static bool platform_bgmac_clk_enabled(struct bgmac *bgmac)
{
+ if (!bgmac->plat.idm_base)
+ return true;
+
if ((bgmac_idm_read(bgmac, BCMA_IOCTL) & BGMAC_CLK_EN) != BGMAC_CLK_EN)
return false;
if (bgmac_idm_read(bgmac, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET)
@@ -66,6 +69,9 @@
{
u32 val;
+ if (!bgmac->plat.idm_base)
+ return;
+
/* The Reset Control register only contains a single bit to show if the
* controller is currently in reset. Do a sanity check here, just in
* case the bootloader happened to leave the device in reset.
@@ -180,6 +186,7 @@
bgmac->feature_flags |= BGMAC_FEAT_CMDCFG_SR_REV4;
bgmac->feature_flags |= BGMAC_FEAT_TX_MASK_SETUP;
bgmac->feature_flags |= BGMAC_FEAT_RX_MASK_SETUP;
+ bgmac->feature_flags |= BGMAC_FEAT_IDM_MASK;
bgmac->dev = &pdev->dev;
bgmac->dma_dev = &pdev->dev;
@@ -207,15 +214,13 @@
return PTR_ERR(bgmac->plat.base);
regs = platform_get_resource_byname(pdev, IORESOURCE_MEM, "idm_base");
- if (!regs) {
- dev_err(&pdev->dev, "Unable to obtain idm resource\n");
- return -EINVAL;
+ if (regs) {
+ bgmac->plat.idm_base = devm_ioremap_resource(&pdev->dev, regs);
+ if (IS_ERR(bgmac->plat.idm_base))
+ return PTR_ERR(bgmac->plat.idm_base);
+ bgmac->feature_flags &= ~BGMAC_FEAT_IDM_MASK;
}
- bgmac->plat.idm_base = devm_ioremap_resource(&pdev->dev, regs);
- if (IS_ERR(bgmac->plat.idm_base))
- return PTR_ERR(bgmac->plat.idm_base);
-
regs = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nicpm_base");
if (regs) {
bgmac->plat.nicpm_base = devm_ioremap_resource(&pdev->dev,
diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c
index ba4d2e1..48d672b 100644
--- a/drivers/net/ethernet/broadcom/bgmac.c
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -622,9 +622,11 @@
BUILD_BUG_ON(BGMAC_MAX_TX_RINGS > ARRAY_SIZE(ring_base));
BUILD_BUG_ON(BGMAC_MAX_RX_RINGS > ARRAY_SIZE(ring_base));
- if (!(bgmac_idm_read(bgmac, BCMA_IOST) & BCMA_IOST_DMA64)) {
- dev_err(bgmac->dev, "Core does not report 64-bit DMA\n");
- return -ENOTSUPP;
+ if (!(bgmac->feature_flags & BGMAC_FEAT_IDM_MASK)) {
+ if (!(bgmac_idm_read(bgmac, BCMA_IOST) & BCMA_IOST_DMA64)) {
+ dev_err(bgmac->dev, "Core does not report 64-bit DMA\n");
+ return -ENOTSUPP;
+ }
}
for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) {
@@ -855,9 +857,11 @@
static void bgmac_miiconfig(struct bgmac *bgmac)
{
if (bgmac->feature_flags & BGMAC_FEAT_FORCE_SPEED_2500) {
- bgmac_idm_write(bgmac, BCMA_IOCTL,
- bgmac_idm_read(bgmac, BCMA_IOCTL) | 0x40 |
- BGMAC_BCMA_IOCTL_SW_CLKEN);
+ if (!(bgmac->feature_flags & BGMAC_FEAT_IDM_MASK)) {
+ bgmac_idm_write(bgmac, BCMA_IOCTL,
+ bgmac_idm_read(bgmac, BCMA_IOCTL) |
+ 0x40 | BGMAC_BCMA_IOCTL_SW_CLKEN);
+ }
bgmac->mac_speed = SPEED_2500;
bgmac->mac_duplex = DUPLEX_FULL;
bgmac_mac_speed(bgmac);
@@ -874,11 +878,36 @@
}
}
+static void bgmac_chip_reset_idm_config(struct bgmac *bgmac)
+{
+ u32 iost;
+
+ iost = bgmac_idm_read(bgmac, BCMA_IOST);
+ if (bgmac->feature_flags & BGMAC_FEAT_IOST_ATTACHED)
+ iost &= ~BGMAC_BCMA_IOST_ATTACHED;
+
+ /* 3GMAC: for BCM4707 & BCM47094, only do core reset at bgmac_probe() */
+ if (!(bgmac->feature_flags & BGMAC_FEAT_NO_RESET)) {
+ u32 flags = 0;
+
+ if (iost & BGMAC_BCMA_IOST_ATTACHED) {
+ flags = BGMAC_BCMA_IOCTL_SW_CLKEN;
+ if (!bgmac->has_robosw)
+ flags |= BGMAC_BCMA_IOCTL_SW_RESET;
+ }
+ bgmac_clk_enable(bgmac, flags);
+ }
+
+ if (iost & BGMAC_BCMA_IOST_ATTACHED && !bgmac->has_robosw)
+ bgmac_idm_write(bgmac, BCMA_IOCTL,
+ bgmac_idm_read(bgmac, BCMA_IOCTL) &
+ ~BGMAC_BCMA_IOCTL_SW_RESET);
+}
+
/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipreset */
static void bgmac_chip_reset(struct bgmac *bgmac)
{
u32 cmdcfg_sr;
- u32 iost;
int i;
if (bgmac_clk_enabled(bgmac)) {
@@ -899,20 +928,8 @@
/* TODO: Clear software multicast filter list */
}
- iost = bgmac_idm_read(bgmac, BCMA_IOST);
- if (bgmac->feature_flags & BGMAC_FEAT_IOST_ATTACHED)
- iost &= ~BGMAC_BCMA_IOST_ATTACHED;
-
- /* 3GMAC: for BCM4707 & BCM47094, only do core reset at bgmac_probe() */
- if (!(bgmac->feature_flags & BGMAC_FEAT_NO_RESET)) {
- u32 flags = 0;
- if (iost & BGMAC_BCMA_IOST_ATTACHED) {
- flags = BGMAC_BCMA_IOCTL_SW_CLKEN;
- if (!bgmac->has_robosw)
- flags |= BGMAC_BCMA_IOCTL_SW_RESET;
- }
- bgmac_clk_enable(bgmac, flags);
- }
+ if (!(bgmac->feature_flags & BGMAC_FEAT_IDM_MASK))
+ bgmac_chip_reset_idm_config(bgmac);
/* Request Misc PLL for corerev > 2 */
if (bgmac->feature_flags & BGMAC_FEAT_MISC_PLL_REQ) {
@@ -970,11 +987,6 @@
BGMAC_CHIPCTL_7_IF_TYPE_RGMII);
}
- if (iost & BGMAC_BCMA_IOST_ATTACHED && !bgmac->has_robosw)
- bgmac_idm_write(bgmac, BCMA_IOCTL,
- bgmac_idm_read(bgmac, BCMA_IOCTL) &
- ~BGMAC_BCMA_IOCTL_SW_RESET);
-
/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_reset
* Specs don't say about using BGMAC_CMDCFG_SR, but in this routine
* BGMAC_CMDCFG is read _after_ putting chip in a reset. So it has to
@@ -1497,8 +1509,10 @@
bgmac_clk_enable(bgmac, 0);
/* This seems to be fixing IRQ by assigning OOB #6 to the core */
- if (bgmac->feature_flags & BGMAC_FEAT_IRQ_ID_OOB_6)
- bgmac_idm_write(bgmac, BCMA_OOB_SEL_OUT_A30, 0x86);
+ if (!(bgmac->feature_flags & BGMAC_FEAT_IDM_MASK)) {
+ if (bgmac->feature_flags & BGMAC_FEAT_IRQ_ID_OOB_6)
+ bgmac_idm_write(bgmac, BCMA_OOB_SEL_OUT_A30, 0x86);
+ }
bgmac_chip_reset(bgmac);
diff --git a/drivers/net/ethernet/broadcom/bgmac.h b/drivers/net/ethernet/broadcom/bgmac.h
index c181876..443d57b 100644
--- a/drivers/net/ethernet/broadcom/bgmac.h
+++ b/drivers/net/ethernet/broadcom/bgmac.h
@@ -425,6 +425,7 @@
#define BGMAC_FEAT_CC4_IF_SW_TYPE BIT(17)
#define BGMAC_FEAT_CC4_IF_SW_TYPE_RGMII BIT(18)
#define BGMAC_FEAT_CC7_IF_TYPE_RGMII BIT(19)
+#define BGMAC_FEAT_IDM_MASK BIT(20)
struct bgmac_slot_info {
union {
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
index 4342374..1e33abd 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
@@ -2886,7 +2886,7 @@
static int bnx2x_test_nvram(struct bnx2x *bp)
{
- const struct crc_pair nvram_tbl[] = {
+ static const struct crc_pair nvram_tbl[] = {
{ 0, 0x14 }, /* bootstrap */
{ 0x14, 0xec }, /* dir */
{ 0x100, 0x350 }, /* manuf_info */
@@ -2895,7 +2895,7 @@
{ 0x708, 0x70 }, /* manuf_key_info */
{ 0, 0 }
};
- const struct crc_pair nvram_tbl2[] = {
+ static const struct crc_pair nvram_tbl2[] = {
{ 0x7e8, 0x350 }, /* manuf_info2 */
{ 0xb38, 0xf0 }, /* feature_info */
{ 0, 0 }
@@ -3162,7 +3162,8 @@
if (is_multi(bp)) {
for_each_eth_queue(bp, i) {
memset(queue_name, 0, sizeof(queue_name));
- sprintf(queue_name, "%d", i);
+ snprintf(queue_name, sizeof(queue_name),
+ "%d", i);
for (j = 0; j < BNX2X_NUM_Q_STATS; j++)
snprintf(buf + (k + j)*ETH_GSTRING_LEN,
ETH_GSTRING_LEN,
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index a19f68f..e7c8539 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -3458,13 +3458,18 @@
req.ver_upd = DRV_VER_UPD;
if (BNXT_PF(bp)) {
- DECLARE_BITMAP(vf_req_snif_bmap, 256);
- u32 *data = (u32 *)vf_req_snif_bmap;
+ u32 data[8];
int i;
- memset(vf_req_snif_bmap, 0, sizeof(vf_req_snif_bmap));
- for (i = 0; i < ARRAY_SIZE(bnxt_vf_req_snif); i++)
- __set_bit(bnxt_vf_req_snif[i], vf_req_snif_bmap);
+ memset(data, 0, sizeof(data));
+ for (i = 0; i < ARRAY_SIZE(bnxt_vf_req_snif); i++) {
+ u16 cmd = bnxt_vf_req_snif[i];
+ unsigned int bit, idx;
+
+ idx = cmd / 32;
+ bit = cmd % 32;
+ data[idx] |= 1 << bit;
+ }
for (i = 0; i < 8; i++)
req.vf_req_fwd[i] = cpu_to_le32(data[i]);
@@ -6279,6 +6284,12 @@
return __bnxt_open_nic(bp, true, true);
}
+static bool bnxt_drv_busy(struct bnxt *bp)
+{
+ return (test_bit(BNXT_STATE_IN_SP_TASK, &bp->state) ||
+ test_bit(BNXT_STATE_READ_STATS, &bp->state));
+}
+
int bnxt_close_nic(struct bnxt *bp, bool irq_re_init, bool link_re_init)
{
int rc = 0;
@@ -6297,7 +6308,7 @@
clear_bit(BNXT_STATE_OPEN, &bp->state);
smp_mb__after_atomic();
- while (test_bit(BNXT_STATE_IN_SP_TASK, &bp->state))
+ while (bnxt_drv_busy(bp))
msleep(20);
/* Flush rings and and disable interrupts */
@@ -6358,8 +6369,15 @@
u32 i;
struct bnxt *bp = netdev_priv(dev);
- if (!bp->bnapi)
+ set_bit(BNXT_STATE_READ_STATS, &bp->state);
+ /* Make sure bnxt_close_nic() sees that we are reading stats before
+ * we check the BNXT_STATE_OPEN flag.
+ */
+ smp_mb__after_atomic();
+ if (!test_bit(BNXT_STATE_OPEN, &bp->state)) {
+ clear_bit(BNXT_STATE_READ_STATS, &bp->state);
return;
+ }
/* TODO check if we need to synchronize with bnxt_close path */
for (i = 0; i < bp->cp_nr_rings; i++) {
@@ -6406,6 +6424,7 @@
stats->tx_fifo_errors = le64_to_cpu(tx->tx_fifo_underruns);
stats->tx_errors = le64_to_cpu(tx->tx_err);
}
+ clear_bit(BNXT_STATE_READ_STATS, &bp->state);
}
static bool bnxt_mc_list_updated(struct bnxt *bp, u32 *rx_mask)
@@ -6904,16 +6923,13 @@
}
/* Under rtnl_lock */
-int bnxt_reserve_rings(struct bnxt *bp, int tx, int rx, int tcs, int tx_xdp)
+int bnxt_reserve_rings(struct bnxt *bp, int tx, int rx, bool sh, int tcs,
+ int tx_xdp)
{
int max_rx, max_tx, tx_sets = 1;
int tx_rings_needed;
- bool sh = true;
int rc;
- if (!(bp->flags & BNXT_FLAG_SHARED_RINGS))
- sh = false;
-
if (tcs)
tx_sets = tcs;
@@ -7121,7 +7137,7 @@
sh = true;
rc = bnxt_reserve_rings(bp, bp->tx_nr_rings_per_tc, bp->rx_nr_rings,
- tc, bp->tx_nr_rings_xdp);
+ sh, tc, bp->tx_nr_rings_xdp);
if (rc)
return rc;
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
index f872a7d..f34691f 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
@@ -1117,6 +1117,7 @@
unsigned long state;
#define BNXT_STATE_OPEN 0
#define BNXT_STATE_IN_SP_TASK 1
+#define BNXT_STATE_READ_STATS 2
struct bnxt_irq *irq_tbl;
int total_irqs;
@@ -1300,7 +1301,8 @@
int bnxt_half_open_nic(struct bnxt *bp);
void bnxt_half_close_nic(struct bnxt *bp);
int bnxt_close_nic(struct bnxt *, bool, bool);
-int bnxt_reserve_rings(struct bnxt *bp, int tx, int rx, int tcs, int tx_xdp);
+int bnxt_reserve_rings(struct bnxt *bp, int tx, int rx, bool sh, int tcs,
+ int tx_xdp);
int bnxt_setup_mq_tc(struct net_device *dev, u8 tc);
int bnxt_get_max_rings(struct bnxt *, int *, int *, bool);
void bnxt_restore_pf_fw_resources(struct bnxt *bp);
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
index fd11815..be6acad 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -432,7 +432,8 @@
}
tx_xdp = req_rx_rings;
}
- rc = bnxt_reserve_rings(bp, req_tx_rings, req_rx_rings, tcs, tx_xdp);
+ rc = bnxt_reserve_rings(bp, req_tx_rings, req_rx_rings, sh, tcs,
+ tx_xdp);
if (rc) {
netdev_warn(dev, "Unable to allocate the requested rings\n");
return rc;
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c
index 7d67552..3961a68 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c
@@ -170,7 +170,7 @@
if (!tc)
tc = 1;
rc = bnxt_reserve_rings(bp, bp->tx_nr_rings_per_tc, bp->rx_nr_rings,
- tc, tx_xdp);
+ true, tc, tx_xdp);
if (rc) {
netdev_warn(dev, "Unable to reserve enough TX rings to support XDP.\n");
return rc;
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index daca1c9..a981c4e 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -1202,12 +1202,21 @@
return tx_cb_ptr;
}
-/* Simple helper to free a control block's resources */
-static void bcmgenet_free_cb(struct enet_cb *cb)
+static struct enet_cb *bcmgenet_put_txcb(struct bcmgenet_priv *priv,
+ struct bcmgenet_tx_ring *ring)
{
- dev_kfree_skb_any(cb->skb);
- cb->skb = NULL;
- dma_unmap_addr_set(cb, dma_addr, 0);
+ struct enet_cb *tx_cb_ptr;
+
+ tx_cb_ptr = ring->cbs;
+ tx_cb_ptr += ring->write_ptr - ring->cb_ptr;
+
+ /* Rewinding local write pointer */
+ if (ring->write_ptr == ring->cb_ptr)
+ ring->write_ptr = ring->end_ptr;
+ else
+ ring->write_ptr--;
+
+ return tx_cb_ptr;
}
static inline void bcmgenet_rx_ring16_int_disable(struct bcmgenet_rx_ring *ring)
@@ -1260,18 +1269,72 @@
INTRL2_CPU_MASK_SET);
}
+/* Simple helper to free a transmit control block's resources
+ * Returns an skb when the last transmit control block associated with the
+ * skb is freed. The skb should be freed by the caller if necessary.
+ */
+static struct sk_buff *bcmgenet_free_tx_cb(struct device *dev,
+ struct enet_cb *cb)
+{
+ struct sk_buff *skb;
+
+ skb = cb->skb;
+
+ if (skb) {
+ cb->skb = NULL;
+ if (cb == GENET_CB(skb)->first_cb)
+ dma_unmap_single(dev, dma_unmap_addr(cb, dma_addr),
+ dma_unmap_len(cb, dma_len),
+ DMA_TO_DEVICE);
+ else
+ dma_unmap_page(dev, dma_unmap_addr(cb, dma_addr),
+ dma_unmap_len(cb, dma_len),
+ DMA_TO_DEVICE);
+ dma_unmap_addr_set(cb, dma_addr, 0);
+
+ if (cb == GENET_CB(skb)->last_cb)
+ return skb;
+
+ } else if (dma_unmap_addr(cb, dma_addr)) {
+ dma_unmap_page(dev,
+ dma_unmap_addr(cb, dma_addr),
+ dma_unmap_len(cb, dma_len),
+ DMA_TO_DEVICE);
+ dma_unmap_addr_set(cb, dma_addr, 0);
+ }
+
+ return 0;
+}
+
+/* Simple helper to free a receive control block's resources */
+static struct sk_buff *bcmgenet_free_rx_cb(struct device *dev,
+ struct enet_cb *cb)
+{
+ struct sk_buff *skb;
+
+ skb = cb->skb;
+ cb->skb = NULL;
+
+ if (dma_unmap_addr(cb, dma_addr)) {
+ dma_unmap_single(dev, dma_unmap_addr(cb, dma_addr),
+ dma_unmap_len(cb, dma_len), DMA_FROM_DEVICE);
+ dma_unmap_addr_set(cb, dma_addr, 0);
+ }
+
+ return skb;
+}
+
/* Unlocked version of the reclaim routine */
static unsigned int __bcmgenet_tx_reclaim(struct net_device *dev,
struct bcmgenet_tx_ring *ring)
{
struct bcmgenet_priv *priv = netdev_priv(dev);
- struct device *kdev = &priv->pdev->dev;
- struct enet_cb *tx_cb_ptr;
- unsigned int pkts_compl = 0;
- unsigned int bytes_compl = 0;
- unsigned int c_index;
- unsigned int txbds_ready;
unsigned int txbds_processed = 0;
+ unsigned int bytes_compl = 0;
+ unsigned int pkts_compl = 0;
+ unsigned int txbds_ready;
+ unsigned int c_index;
+ struct sk_buff *skb;
/* Clear status before servicing to reduce spurious interrupts */
if (ring->index == DESC_INDEX)
@@ -1292,21 +1355,12 @@
/* Reclaim transmitted buffers */
while (txbds_processed < txbds_ready) {
- tx_cb_ptr = &priv->tx_cbs[ring->clean_ptr];
- if (tx_cb_ptr->skb) {
+ skb = bcmgenet_free_tx_cb(&priv->pdev->dev,
+ &priv->tx_cbs[ring->clean_ptr]);
+ if (skb) {
pkts_compl++;
- bytes_compl += GENET_CB(tx_cb_ptr->skb)->bytes_sent;
- dma_unmap_single(kdev,
- dma_unmap_addr(tx_cb_ptr, dma_addr),
- dma_unmap_len(tx_cb_ptr, dma_len),
- DMA_TO_DEVICE);
- bcmgenet_free_cb(tx_cb_ptr);
- } else if (dma_unmap_addr(tx_cb_ptr, dma_addr)) {
- dma_unmap_page(kdev,
- dma_unmap_addr(tx_cb_ptr, dma_addr),
- dma_unmap_len(tx_cb_ptr, dma_len),
- DMA_TO_DEVICE);
- dma_unmap_addr_set(tx_cb_ptr, dma_addr, 0);
+ bytes_compl += GENET_CB(skb)->bytes_sent;
+ dev_kfree_skb_any(skb);
}
txbds_processed++;
@@ -1380,95 +1434,6 @@
bcmgenet_tx_reclaim(dev, &priv->tx_rings[DESC_INDEX]);
}
-/* Transmits a single SKB (either head of a fragment or a single SKB)
- * caller must hold priv->lock
- */
-static int bcmgenet_xmit_single(struct net_device *dev,
- struct sk_buff *skb,
- u16 dma_desc_flags,
- struct bcmgenet_tx_ring *ring)
-{
- struct bcmgenet_priv *priv = netdev_priv(dev);
- struct device *kdev = &priv->pdev->dev;
- struct enet_cb *tx_cb_ptr;
- unsigned int skb_len;
- dma_addr_t mapping;
- u32 length_status;
- int ret;
-
- tx_cb_ptr = bcmgenet_get_txcb(priv, ring);
-
- if (unlikely(!tx_cb_ptr))
- BUG();
-
- tx_cb_ptr->skb = skb;
-
- skb_len = skb_headlen(skb);
-
- mapping = dma_map_single(kdev, skb->data, skb_len, DMA_TO_DEVICE);
- ret = dma_mapping_error(kdev, mapping);
- if (ret) {
- priv->mib.tx_dma_failed++;
- netif_err(priv, tx_err, dev, "Tx DMA map failed\n");
- dev_kfree_skb(skb);
- return ret;
- }
-
- dma_unmap_addr_set(tx_cb_ptr, dma_addr, mapping);
- dma_unmap_len_set(tx_cb_ptr, dma_len, skb_len);
- length_status = (skb_len << DMA_BUFLENGTH_SHIFT) | dma_desc_flags |
- (priv->hw_params->qtag_mask << DMA_TX_QTAG_SHIFT) |
- DMA_TX_APPEND_CRC;
-
- if (skb->ip_summed == CHECKSUM_PARTIAL)
- length_status |= DMA_TX_DO_CSUM;
-
- dmadesc_set(priv, tx_cb_ptr->bd_addr, mapping, length_status);
-
- return 0;
-}
-
-/* Transmit a SKB fragment */
-static int bcmgenet_xmit_frag(struct net_device *dev,
- skb_frag_t *frag,
- u16 dma_desc_flags,
- struct bcmgenet_tx_ring *ring)
-{
- struct bcmgenet_priv *priv = netdev_priv(dev);
- struct device *kdev = &priv->pdev->dev;
- struct enet_cb *tx_cb_ptr;
- unsigned int frag_size;
- dma_addr_t mapping;
- int ret;
-
- tx_cb_ptr = bcmgenet_get_txcb(priv, ring);
-
- if (unlikely(!tx_cb_ptr))
- BUG();
-
- tx_cb_ptr->skb = NULL;
-
- frag_size = skb_frag_size(frag);
-
- mapping = skb_frag_dma_map(kdev, frag, 0, frag_size, DMA_TO_DEVICE);
- ret = dma_mapping_error(kdev, mapping);
- if (ret) {
- priv->mib.tx_dma_failed++;
- netif_err(priv, tx_err, dev, "%s: Tx DMA map failed\n",
- __func__);
- return ret;
- }
-
- dma_unmap_addr_set(tx_cb_ptr, dma_addr, mapping);
- dma_unmap_len_set(tx_cb_ptr, dma_len, frag_size);
-
- dmadesc_set(priv, tx_cb_ptr->bd_addr, mapping,
- (frag_size << DMA_BUFLENGTH_SHIFT) | dma_desc_flags |
- (priv->hw_params->qtag_mask << DMA_TX_QTAG_SHIFT));
-
- return 0;
-}
-
/* Reallocate the SKB to put enough headroom in front of it and insert
* the transmit checksum offsets in the descriptors
*/
@@ -1535,11 +1500,16 @@
static netdev_tx_t bcmgenet_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct bcmgenet_priv *priv = netdev_priv(dev);
+ struct device *kdev = &priv->pdev->dev;
struct bcmgenet_tx_ring *ring = NULL;
+ struct enet_cb *tx_cb_ptr;
struct netdev_queue *txq;
unsigned long flags = 0;
int nr_frags, index;
- u16 dma_desc_flags;
+ dma_addr_t mapping;
+ unsigned int size;
+ skb_frag_t *frag;
+ u32 len_stat;
int ret;
int i;
@@ -1592,29 +1562,53 @@
}
}
- dma_desc_flags = DMA_SOP;
- if (nr_frags == 0)
- dma_desc_flags |= DMA_EOP;
+ for (i = 0; i <= nr_frags; i++) {
+ tx_cb_ptr = bcmgenet_get_txcb(priv, ring);
- /* Transmit single SKB or head of fragment list */
- ret = bcmgenet_xmit_single(dev, skb, dma_desc_flags, ring);
- if (ret) {
- ret = NETDEV_TX_OK;
- goto out;
- }
+ if (unlikely(!tx_cb_ptr))
+ BUG();
- /* xmit fragment */
- for (i = 0; i < nr_frags; i++) {
- ret = bcmgenet_xmit_frag(dev,
- &skb_shinfo(skb)->frags[i],
- (i == nr_frags - 1) ? DMA_EOP : 0,
- ring);
- if (ret) {
- ret = NETDEV_TX_OK;
- goto out;
+ if (!i) {
+ /* Transmit single SKB or head of fragment list */
+ GENET_CB(skb)->first_cb = tx_cb_ptr;
+ size = skb_headlen(skb);
+ mapping = dma_map_single(kdev, skb->data, size,
+ DMA_TO_DEVICE);
+ } else {
+ /* xmit fragment */
+ frag = &skb_shinfo(skb)->frags[i - 1];
+ size = skb_frag_size(frag);
+ mapping = skb_frag_dma_map(kdev, frag, 0, size,
+ DMA_TO_DEVICE);
}
+
+ ret = dma_mapping_error(kdev, mapping);
+ if (ret) {
+ priv->mib.tx_dma_failed++;
+ netif_err(priv, tx_err, dev, "Tx DMA map failed\n");
+ ret = NETDEV_TX_OK;
+ goto out_unmap_frags;
+ }
+ dma_unmap_addr_set(tx_cb_ptr, dma_addr, mapping);
+ dma_unmap_len_set(tx_cb_ptr, dma_len, size);
+
+ tx_cb_ptr->skb = skb;
+
+ len_stat = (size << DMA_BUFLENGTH_SHIFT) |
+ (priv->hw_params->qtag_mask << DMA_TX_QTAG_SHIFT);
+
+ if (!i) {
+ len_stat |= DMA_TX_APPEND_CRC | DMA_SOP;
+ if (skb->ip_summed == CHECKSUM_PARTIAL)
+ len_stat |= DMA_TX_DO_CSUM;
+ }
+ if (i == nr_frags)
+ len_stat |= DMA_EOP;
+
+ dmadesc_set(priv, tx_cb_ptr->bd_addr, mapping, len_stat);
}
+ GENET_CB(skb)->last_cb = tx_cb_ptr;
skb_tx_timestamp(skb);
/* Decrement total BD count and advance our write pointer */
@@ -1635,6 +1629,19 @@
spin_unlock_irqrestore(&ring->lock, flags);
return ret;
+
+out_unmap_frags:
+ /* Back up for failed control block mapping */
+ bcmgenet_put_txcb(priv, ring);
+
+ /* Unmap successfully mapped control blocks */
+ while (i-- > 0) {
+ tx_cb_ptr = bcmgenet_put_txcb(priv, ring);
+ bcmgenet_free_tx_cb(kdev, tx_cb_ptr);
+ }
+
+ dev_kfree_skb(skb);
+ goto out;
}
static struct sk_buff *bcmgenet_rx_refill(struct bcmgenet_priv *priv,
@@ -1666,14 +1673,12 @@
}
/* Grab the current Rx skb from the ring and DMA-unmap it */
- rx_skb = cb->skb;
- if (likely(rx_skb))
- dma_unmap_single(kdev, dma_unmap_addr(cb, dma_addr),
- priv->rx_buf_len, DMA_FROM_DEVICE);
+ rx_skb = bcmgenet_free_rx_cb(kdev, cb);
/* Put the new Rx skb on the ring */
cb->skb = skb;
dma_unmap_addr_set(cb, dma_addr, mapping);
+ dma_unmap_len_set(cb, dma_len, priv->rx_buf_len);
dmadesc_set_addr(priv, cb->bd_addr, mapping);
/* Return the current Rx skb to caller */
@@ -1880,22 +1885,16 @@
static void bcmgenet_free_rx_buffers(struct bcmgenet_priv *priv)
{
- struct device *kdev = &priv->pdev->dev;
+ struct sk_buff *skb;
struct enet_cb *cb;
int i;
for (i = 0; i < priv->num_rx_bds; i++) {
cb = &priv->rx_cbs[i];
- if (dma_unmap_addr(cb, dma_addr)) {
- dma_unmap_single(kdev,
- dma_unmap_addr(cb, dma_addr),
- priv->rx_buf_len, DMA_FROM_DEVICE);
- dma_unmap_addr_set(cb, dma_addr, 0);
- }
-
- if (cb->skb)
- bcmgenet_free_cb(cb);
+ skb = bcmgenet_free_rx_cb(&priv->pdev->dev, cb);
+ if (skb)
+ dev_kfree_skb_any(skb);
}
}
@@ -2479,8 +2478,10 @@
static void bcmgenet_fini_dma(struct bcmgenet_priv *priv)
{
- int i;
struct netdev_queue *txq;
+ struct sk_buff *skb;
+ struct enet_cb *cb;
+ int i;
bcmgenet_fini_rx_napi(priv);
bcmgenet_fini_tx_napi(priv);
@@ -2489,10 +2490,10 @@
bcmgenet_dma_teardown(priv);
for (i = 0; i < priv->num_tx_bds; i++) {
- if (priv->tx_cbs[i].skb != NULL) {
- dev_kfree_skb(priv->tx_cbs[i].skb);
- priv->tx_cbs[i].skb = NULL;
- }
+ cb = priv->tx_cbs + i;
+ skb = bcmgenet_free_tx_cb(&priv->pdev->dev, cb);
+ if (skb)
+ dev_kfree_skb(skb);
}
for (i = 0; i < priv->hw_params->tx_queues; i++) {
@@ -3668,7 +3669,7 @@
phy_init_hw(priv->phydev);
/* Speed settings must be restored */
- bcmgenet_mii_config(priv->dev);
+ bcmgenet_mii_config(priv->dev, false);
/* disable ethernet MAC while updating its registers */
umac_enable_set(priv, CMD_TX_EN | CMD_RX_EN, false);
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.h b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
index efd0702..3a34fdb 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.h
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
@@ -544,6 +544,8 @@
};
struct bcmgenet_skb_cb {
+ struct enet_cb *first_cb; /* First control block of SKB */
+ struct enet_cb *last_cb; /* Last control block of SKB */
unsigned int bytes_sent; /* bytes on the wire (no TSB) */
};
@@ -696,7 +698,7 @@
/* MDIO routines */
int bcmgenet_mii_init(struct net_device *dev);
-int bcmgenet_mii_config(struct net_device *dev);
+int bcmgenet_mii_config(struct net_device *dev, bool init);
int bcmgenet_mii_probe(struct net_device *dev);
void bcmgenet_mii_exit(struct net_device *dev);
void bcmgenet_mii_reset(struct net_device *dev);
diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c
index 071fcbd..30cb97b 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
@@ -238,7 +238,7 @@
bcmgenet_fixed_phy_link_update);
}
-int bcmgenet_mii_config(struct net_device *dev)
+int bcmgenet_mii_config(struct net_device *dev, bool init)
{
struct bcmgenet_priv *priv = netdev_priv(dev);
struct phy_device *phydev = priv->phydev;
@@ -327,7 +327,8 @@
bcmgenet_ext_writel(priv, reg, EXT_RGMII_OOB_CTRL);
}
- dev_info_once(kdev, "configuring instance for %s\n", phy_name);
+ if (init)
+ dev_info(kdev, "configuring instance for %s\n", phy_name);
return 0;
}
@@ -375,7 +376,7 @@
* PHY speed which is needed for bcmgenet_mii_config() to configure
* things appropriately.
*/
- ret = bcmgenet_mii_config(dev);
+ ret = bcmgenet_mii_config(dev, true);
if (ret) {
phy_disconnect(priv->phydev);
return ret;
diff --git a/drivers/net/ethernet/cavium/liquidio/lio_ethtool.c b/drivers/net/ethernet/cavium/liquidio/lio_ethtool.c
index 28ecda3..ebd353b 100644
--- a/drivers/net/ethernet/cavium/liquidio/lio_ethtool.c
+++ b/drivers/net/ethernet/cavium/liquidio/lio_ethtool.c
@@ -335,7 +335,7 @@
static int lio_get_eeprom_len(struct net_device *netdev)
{
- u8 buf[128];
+ u8 buf[192];
struct lio *lio = GET_LIO(netdev);
struct octeon_device *oct_dev = lio->oct_dev;
struct octeon_board_info *board_info;
diff --git a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
index a0ca68c..5e5c4d7 100644
--- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
+++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
@@ -292,11 +292,30 @@
u64 cmr_cfg;
u64 port_cfg = 0;
u64 misc_ctl = 0;
+ bool tx_en, rx_en;
cmr_cfg = bgx_reg_read(bgx, lmac->lmacid, BGX_CMRX_CFG);
- cmr_cfg &= ~CMR_EN;
+ tx_en = cmr_cfg & CMR_PKT_TX_EN;
+ rx_en = cmr_cfg & CMR_PKT_RX_EN;
+ cmr_cfg &= ~(CMR_PKT_RX_EN | CMR_PKT_TX_EN);
bgx_reg_write(bgx, lmac->lmacid, BGX_CMRX_CFG, cmr_cfg);
+ /* Wait for BGX RX to be idle */
+ if (bgx_poll_reg(bgx, lmac->lmacid, BGX_GMP_GMI_PRTX_CFG,
+ GMI_PORT_CFG_RX_IDLE, false)) {
+ dev_err(&bgx->pdev->dev, "BGX%d LMAC%d GMI RX not idle\n",
+ bgx->bgx_id, lmac->lmacid);
+ return;
+ }
+
+ /* Wait for BGX TX to be idle */
+ if (bgx_poll_reg(bgx, lmac->lmacid, BGX_GMP_GMI_PRTX_CFG,
+ GMI_PORT_CFG_TX_IDLE, false)) {
+ dev_err(&bgx->pdev->dev, "BGX%d LMAC%d GMI TX not idle\n",
+ bgx->bgx_id, lmac->lmacid);
+ return;
+ }
+
port_cfg = bgx_reg_read(bgx, lmac->lmacid, BGX_GMP_GMI_PRTX_CFG);
misc_ctl = bgx_reg_read(bgx, lmac->lmacid, BGX_GMP_PCS_MISCX_CTL);
@@ -347,10 +366,8 @@
bgx_reg_write(bgx, lmac->lmacid, BGX_GMP_PCS_MISCX_CTL, misc_ctl);
bgx_reg_write(bgx, lmac->lmacid, BGX_GMP_GMI_PRTX_CFG, port_cfg);
- port_cfg = bgx_reg_read(bgx, lmac->lmacid, BGX_GMP_GMI_PRTX_CFG);
-
- /* Re-enable lmac */
- cmr_cfg |= CMR_EN;
+ /* Restore CMR config settings */
+ cmr_cfg |= (rx_en ? CMR_PKT_RX_EN : 0) | (tx_en ? CMR_PKT_TX_EN : 0);
bgx_reg_write(bgx, lmac->lmacid, BGX_CMRX_CFG, cmr_cfg);
if (bgx->is_rgx && (cmr_cfg & (CMR_PKT_RX_EN | CMR_PKT_TX_EN)))
@@ -1008,7 +1025,7 @@
{
struct device *dev = &bgx->pdev->dev;
struct lmac *lmac;
- char str[20];
+ char str[27];
if (!bgx->is_dlm && lmacid)
return;
diff --git a/drivers/net/ethernet/cavium/thunder/thunder_bgx.h b/drivers/net/ethernet/cavium/thunder/thunder_bgx.h
index 6b7fe6fd..23acdc5 100644
--- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.h
+++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.h
@@ -170,6 +170,8 @@
#define GMI_PORT_CFG_DUPLEX BIT_ULL(2)
#define GMI_PORT_CFG_SLOT_TIME BIT_ULL(3)
#define GMI_PORT_CFG_SPEED_MSB BIT_ULL(8)
+#define GMI_PORT_CFG_RX_IDLE BIT_ULL(12)
+#define GMI_PORT_CFG_TX_IDLE BIT_ULL(13)
#define BGX_GMP_GMI_RXX_JABBER 0x38038
#define BGX_GMP_GMI_TXX_THRESH 0x38210
#define BGX_GMP_GMI_TXX_APPEND 0x38218
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index 86f92e3..e403fa1 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -2083,12 +2083,12 @@
mutex_lock(&uld_mutex);
list_del(&adap->list_node);
+
for (i = 0; i < CXGB4_ULD_MAX; i++)
- if (adap->uld && adap->uld[i].handle) {
+ if (adap->uld && adap->uld[i].handle)
adap->uld[i].state_change(adap->uld[i].handle,
CXGB4_STATE_DETACH);
- adap->uld[i].handle = NULL;
- }
+
if (netevent_registered && list_empty(&adapter_list)) {
unregister_netevent_notifier(&cxgb4_netevent_nb);
netevent_registered = false;
@@ -5303,8 +5303,10 @@
*/
destroy_workqueue(adapter->workq);
- if (is_uld(adapter))
+ if (is_uld(adapter)) {
detach_ulds(adapter);
+ t4_uld_clean_up(adapter);
+ }
disable_interrupts(adapter);
@@ -5385,7 +5387,11 @@
if (adapter->port[i]->reg_state == NETREG_REGISTERED)
cxgb_close(adapter->port[i]);
- t4_uld_clean_up(adapter);
+ if (is_uld(adapter)) {
+ detach_ulds(adapter);
+ t4_uld_clean_up(adapter);
+ }
+
disable_interrupts(adapter);
disable_msi(adapter);
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ptp.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ptp.c
index 50517cf..9f9d6ca 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ptp.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ptp.c
@@ -441,7 +441,8 @@
adapter->ptp_clock = ptp_clock_register(&adapter->ptp_clock_info,
&adapter->pdev->dev);
- if (!adapter->ptp_clock) {
+ if (IS_ERR_OR_NULL(adapter->ptp_clock)) {
+ adapter->ptp_clock = NULL;
dev_err(adapter->pdev_dev,
"PTP %s Clock registration has failed\n", __func__);
return;
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c
index ec53fe9..71a315b 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c
@@ -589,22 +589,37 @@
kfree(adap->uld);
}
+/* This function should be called with uld_mutex taken. */
+static void cxgb4_shutdown_uld_adapter(struct adapter *adap, enum cxgb4_uld type)
+{
+ if (adap->uld[type].handle) {
+ adap->uld[type].handle = NULL;
+ adap->uld[type].add = NULL;
+ release_sge_txq_uld(adap, type);
+
+ if (adap->flags & FULL_INIT_DONE)
+ quiesce_rx_uld(adap, type);
+
+ if (adap->flags & USING_MSIX)
+ free_msix_queue_irqs_uld(adap, type);
+
+ free_sge_queues_uld(adap, type);
+ free_queues_uld(adap, type);
+ }
+}
+
void t4_uld_clean_up(struct adapter *adap)
{
unsigned int i;
- if (!adap->uld)
- return;
+ mutex_lock(&uld_mutex);
for (i = 0; i < CXGB4_ULD_MAX; i++) {
if (!adap->uld[i].handle)
continue;
- if (adap->flags & FULL_INIT_DONE)
- quiesce_rx_uld(adap, i);
- if (adap->flags & USING_MSIX)
- free_msix_queue_irqs_uld(adap, i);
- free_sge_queues_uld(adap, i);
- free_queues_uld(adap, i);
+
+ cxgb4_shutdown_uld_adapter(adap, i);
}
+ mutex_unlock(&uld_mutex);
}
static void uld_init(struct adapter *adap, struct cxgb4_lld_info *lld)
@@ -783,15 +798,8 @@
continue;
if (type == CXGB4_ULD_ISCSIT && is_t4(adap->params.chip))
continue;
- adap->uld[type].handle = NULL;
- adap->uld[type].add = NULL;
- release_sge_txq_uld(adap, type);
- if (adap->flags & FULL_INIT_DONE)
- quiesce_rx_uld(adap, type);
- if (adap->flags & USING_MSIX)
- free_msix_queue_irqs_uld(adap, type);
- free_sge_queues_uld(adap, type);
- free_queues_uld(adap, type);
+
+ cxgb4_shutdown_uld_adapter(adap, type);
}
mutex_unlock(&uld_mutex);
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_pci_id_tbl.h b/drivers/net/ethernet/chelsio/cxgb4/t4_pci_id_tbl.h
index 99987d8..aa28299 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_pci_id_tbl.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_pci_id_tbl.h
@@ -174,6 +174,8 @@
CH_PCI_ID_TABLE_FENTRY(0x50a0), /* Custom T540-CR */
CH_PCI_ID_TABLE_FENTRY(0x50a1), /* Custom T540-CR */
CH_PCI_ID_TABLE_FENTRY(0x50a2), /* Custom T540-KR4 */
+ CH_PCI_ID_TABLE_FENTRY(0x50a3), /* Custom T580-KR4 */
+ CH_PCI_ID_TABLE_FENTRY(0x50a4), /* Custom 2x T540-CR */
/* T6 adapters:
*/
diff --git a/drivers/net/ethernet/cisco/enic/vnic_dev.c b/drivers/net/ethernet/cisco/enic/vnic_dev.c
index 1841ad4..39bad67 100644
--- a/drivers/net/ethernet/cisco/enic/vnic_dev.c
+++ b/drivers/net/ethernet/cisco/enic/vnic_dev.c
@@ -402,8 +402,8 @@
fetch_index = ioread32(&vdev->devcmd2->wq.ctrl->fetch_index);
if (fetch_index == 0xFFFFFFFF) { /* check for hardware gone */
vdev_err(vdev, "Fatal error in devcmd2 init - hardware surprise removal\n");
-
- return -ENODEV;
+ err = -ENODEV;
+ goto err_free_wq;
}
enic_wq_init_start(&vdev->devcmd2->wq, 0, fetch_index, fetch_index, 0,
@@ -414,7 +414,7 @@
err = vnic_dev_alloc_desc_ring(vdev, &vdev->devcmd2->results_ring,
DEVCMD2_RING_SIZE, DEVCMD2_DESC_SIZE);
if (err)
- goto err_free_wq;
+ goto err_disable_wq;
vdev->devcmd2->result = vdev->devcmd2->results_ring.descs;
vdev->devcmd2->cmd_ring = vdev->devcmd2->wq.ring.descs;
@@ -433,8 +433,9 @@
err_free_desc_ring:
vnic_dev_free_desc_ring(vdev, &vdev->devcmd2->results_ring);
-err_free_wq:
+err_disable_wq:
vnic_wq_disable(&vdev->devcmd2->wq);
+err_free_wq:
vnic_wq_free(&vdev->devcmd2->wq);
err_free_devcmd2:
kfree(vdev->devcmd2);
diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index 95bf5e8..34dae51 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -125,7 +125,7 @@
iowrite32(maccr, priv->base + FTGMAC100_OFFSET_MACCR);
iowrite32(maccr | FTGMAC100_MACCR_SW_RST,
priv->base + FTGMAC100_OFFSET_MACCR);
- for (i = 0; i < 50; i++) {
+ for (i = 0; i < 200; i++) {
unsigned int maccr;
maccr = ioread32(priv->base + FTGMAC100_OFFSET_MACCR);
@@ -392,7 +392,7 @@
struct net_device *netdev = priv->netdev;
struct sk_buff *skb;
dma_addr_t map;
- int err;
+ int err = 0;
skb = netdev_alloc_skb_ip_align(netdev, RX_BUF_SIZE);
if (unlikely(!skb)) {
@@ -428,7 +428,7 @@
else
rxdes->rxdes0 = 0;
- return 0;
+ return err;
}
static unsigned int ftgmac100_next_rx_pointer(struct ftgmac100 *priv,
@@ -1682,6 +1682,7 @@
priv->mii_bus->name = "ftgmac100_mdio";
snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s-%d",
pdev->name, pdev->id);
+ priv->mii_bus->parent = priv->dev;
priv->mii_bus->priv = priv->netdev;
priv->mii_bus->read = ftgmac100_mdiobus_read;
priv->mii_bus->write = ftgmac100_mdiobus_write;
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c b/drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c
index ff864a1..a37166e 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c
@@ -776,8 +776,9 @@
assert(handle);
mac_cb = hns_get_mac_cb(handle);
- if (!mac_cb->cpld_ctrl)
+ if (mac_cb->media_type != HNAE_MEDIA_TYPE_FIBER)
return;
+
hns_set_led_opt(mac_cb);
}
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c
index 7a8addd..408b63f 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c
@@ -53,6 +53,34 @@
return ret;
}
+static void hns_dsaf_acpi_ledctrl_by_port(struct hns_mac_cb *mac_cb, u8 op_type,
+ u32 link, u32 port, u32 act)
+{
+ union acpi_object *obj;
+ union acpi_object obj_args[3], argv4;
+
+ obj_args[0].integer.type = ACPI_TYPE_INTEGER;
+ obj_args[0].integer.value = link;
+ obj_args[1].integer.type = ACPI_TYPE_INTEGER;
+ obj_args[1].integer.value = port;
+ obj_args[2].integer.type = ACPI_TYPE_INTEGER;
+ obj_args[2].integer.value = act;
+
+ argv4.type = ACPI_TYPE_PACKAGE;
+ argv4.package.count = 3;
+ argv4.package.elements = obj_args;
+
+ obj = acpi_evaluate_dsm(ACPI_HANDLE(mac_cb->dev),
+ &hns_dsaf_acpi_dsm_guid, 0, op_type, &argv4);
+ if (!obj) {
+ dev_warn(mac_cb->dev, "ledctrl fail, link:%d port:%d act:%d!\n",
+ link, port, act);
+ return;
+ }
+
+ ACPI_FREE(obj);
+}
+
static void hns_cpld_set_led(struct hns_mac_cb *mac_cb, int link_status,
u16 speed, int data)
{
@@ -93,6 +121,18 @@
}
}
+static void hns_cpld_set_led_acpi(struct hns_mac_cb *mac_cb, int link_status,
+ u16 speed, int data)
+{
+ if (!mac_cb) {
+ pr_err("cpld_led_set mac_cb is null!\n");
+ return;
+ }
+
+ hns_dsaf_acpi_ledctrl_by_port(mac_cb, HNS_OP_LED_SET_FUNC,
+ link_status, mac_cb->mac_id, data);
+}
+
static void cpld_led_reset(struct hns_mac_cb *mac_cb)
{
if (!mac_cb || !mac_cb->cpld_ctrl)
@@ -103,6 +143,20 @@
mac_cb->cpld_led_value = CPLD_LED_DEFAULT_VALUE;
}
+static void cpld_led_reset_acpi(struct hns_mac_cb *mac_cb)
+{
+ if (!mac_cb) {
+ pr_err("cpld_led_reset mac_cb is null!\n");
+ return;
+ }
+
+ if (mac_cb->media_type != HNAE_MEDIA_TYPE_FIBER)
+ return;
+
+ hns_dsaf_acpi_ledctrl_by_port(mac_cb, HNS_OP_LED_SET_FUNC,
+ 0, mac_cb->mac_id, 0);
+}
+
static int cpld_set_led_id(struct hns_mac_cb *mac_cb,
enum hnae_led_state status)
{
@@ -604,8 +658,8 @@
misc_op->cfg_serdes_loopback = hns_mac_config_sds_loopback;
} else if (is_acpi_node(dsaf_dev->dev->fwnode)) {
- misc_op->cpld_set_led = hns_cpld_set_led;
- misc_op->cpld_reset_led = cpld_led_reset;
+ misc_op->cpld_set_led = hns_cpld_set_led_acpi;
+ misc_op->cpld_reset_led = cpld_led_reset_acpi;
misc_op->cpld_set_led_id = cpld_set_led_id;
misc_op->dsaf_reset = hns_dsaf_rst_acpi;
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.c b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
index fe166e0..3987699 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
@@ -1378,13 +1378,20 @@
void hns_nic_net_reinit(struct net_device *netdev)
{
struct hns_nic_priv *priv = netdev_priv(netdev);
+ enum hnae_port_type type = priv->ae_handle->port_type;
netif_trans_update(priv->netdev);
while (test_and_set_bit(NIC_STATE_REINITING, &priv->state))
usleep_range(1000, 2000);
hns_nic_net_down(netdev);
- hns_nic_net_reset(netdev);
+
+ /* Only do hns_nic_net_reset in debug mode
+ * because of hardware limitation.
+ */
+ if (type == HNAE_PORT_DEBUG)
+ hns_nic_net_reset(netdev);
+
(void)hns_nic_net_up(netdev);
clear_bit(NIC_STATE_REINITING, &priv->state);
}
@@ -1997,13 +2004,8 @@
rtnl_lock();
/* put off any impending NetWatchDogTimeout */
netif_trans_update(priv->netdev);
+ hns_nic_net_reinit(priv->netdev);
- if (type == HNAE_PORT_DEBUG) {
- hns_nic_net_reinit(priv->netdev);
- } else {
- netif_carrier_off(priv->netdev);
- netif_tx_disable(priv->netdev);
- }
rtnl_unlock();
}
diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c
index 5794d98..9c94ea9 100644
--- a/drivers/net/ethernet/marvell/mv643xx_eth.c
+++ b/drivers/net/ethernet/marvell/mv643xx_eth.c
@@ -2734,7 +2734,7 @@
ppd.shared = pdev;
memset(&res, 0, sizeof(res));
- if (!of_irq_to_resource(pnp, 0, &res)) {
+ if (of_irq_to_resource(pnp, 0, &res) <= 0) {
dev_err(&pdev->dev, "missing interrupt on %s\n", pnp->name);
return -EINVAL;
}
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index b3d0c2e..e588a0c 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -22,6 +22,7 @@
#include <linux/if_vlan.h>
#include <linux/reset.h>
#include <linux/tcp.h>
+#include <linux/interrupt.h>
#include "mtk_eth_soc.h"
@@ -947,6 +948,10 @@
RX_DMA_FPORT_MASK;
mac--;
+ if (unlikely(mac < 0 || mac >= MTK_MAC_COUNT ||
+ !eth->netdev[mac]))
+ goto release_desc;
+
netdev = eth->netdev[mac];
if (unlikely(test_bit(MTK_RESETTING, ð->state)))
diff --git a/drivers/net/ethernet/mellanox/mlx4/alloc.c b/drivers/net/ethernet/mellanox/mlx4/alloc.c
index 249a458..b651c12 100644
--- a/drivers/net/ethernet/mellanox/mlx4/alloc.c
+++ b/drivers/net/ethernet/mellanox/mlx4/alloc.c
@@ -283,7 +283,7 @@
}
/* Should be called under a lock */
-static int __mlx4_zone_remove_one_entry(struct mlx4_zone_entry *entry)
+static void __mlx4_zone_remove_one_entry(struct mlx4_zone_entry *entry)
{
struct mlx4_zone_allocator *zone_alloc = entry->allocator;
@@ -315,8 +315,6 @@
}
zone_alloc->mask = mask;
}
-
- return 0;
}
void mlx4_zone_allocator_destroy(struct mlx4_zone_allocator *zone_alloc)
@@ -457,7 +455,7 @@
int mlx4_zone_remove_one(struct mlx4_zone_allocator *zones, u32 uid)
{
struct mlx4_zone_entry *zone;
- int res;
+ int res = 0;
spin_lock(&zones->lock);
@@ -468,7 +466,7 @@
goto out;
}
- res = __mlx4_zone_remove_one_entry(zone);
+ __mlx4_zone_remove_one_entry(zone);
out:
spin_unlock(&zones->lock);
@@ -578,7 +576,7 @@
}
static int mlx4_buf_direct_alloc(struct mlx4_dev *dev, int size,
- struct mlx4_buf *buf, gfp_t gfp)
+ struct mlx4_buf *buf)
{
dma_addr_t t;
@@ -587,7 +585,7 @@
buf->page_shift = get_order(size) + PAGE_SHIFT;
buf->direct.buf =
dma_zalloc_coherent(&dev->persist->pdev->dev,
- size, &t, gfp);
+ size, &t, GFP_KERNEL);
if (!buf->direct.buf)
return -ENOMEM;
@@ -607,10 +605,10 @@
* multiple pages, so we don't require too much contiguous memory.
*/
int mlx4_buf_alloc(struct mlx4_dev *dev, int size, int max_direct,
- struct mlx4_buf *buf, gfp_t gfp)
+ struct mlx4_buf *buf)
{
if (size <= max_direct) {
- return mlx4_buf_direct_alloc(dev, size, buf, gfp);
+ return mlx4_buf_direct_alloc(dev, size, buf);
} else {
dma_addr_t t;
int i;
@@ -620,14 +618,14 @@
buf->npages = buf->nbufs;
buf->page_shift = PAGE_SHIFT;
buf->page_list = kcalloc(buf->nbufs, sizeof(*buf->page_list),
- gfp);
+ GFP_KERNEL);
if (!buf->page_list)
return -ENOMEM;
for (i = 0; i < buf->nbufs; ++i) {
buf->page_list[i].buf =
dma_zalloc_coherent(&dev->persist->pdev->dev,
- PAGE_SIZE, &t, gfp);
+ PAGE_SIZE, &t, GFP_KERNEL);
if (!buf->page_list[i].buf)
goto err_free;
@@ -663,12 +661,11 @@
}
EXPORT_SYMBOL_GPL(mlx4_buf_free);
-static struct mlx4_db_pgdir *mlx4_alloc_db_pgdir(struct device *dma_device,
- gfp_t gfp)
+static struct mlx4_db_pgdir *mlx4_alloc_db_pgdir(struct device *dma_device)
{
struct mlx4_db_pgdir *pgdir;
- pgdir = kzalloc(sizeof *pgdir, gfp);
+ pgdir = kzalloc(sizeof(*pgdir), GFP_KERNEL);
if (!pgdir)
return NULL;
@@ -676,7 +673,7 @@
pgdir->bits[0] = pgdir->order0;
pgdir->bits[1] = pgdir->order1;
pgdir->db_page = dma_alloc_coherent(dma_device, PAGE_SIZE,
- &pgdir->db_dma, gfp);
+ &pgdir->db_dma, GFP_KERNEL);
if (!pgdir->db_page) {
kfree(pgdir);
return NULL;
@@ -716,7 +713,7 @@
return 0;
}
-int mlx4_db_alloc(struct mlx4_dev *dev, struct mlx4_db *db, int order, gfp_t gfp)
+int mlx4_db_alloc(struct mlx4_dev *dev, struct mlx4_db *db, int order)
{
struct mlx4_priv *priv = mlx4_priv(dev);
struct mlx4_db_pgdir *pgdir;
@@ -728,7 +725,7 @@
if (!mlx4_alloc_db_from_pgdir(pgdir, db, order))
goto out;
- pgdir = mlx4_alloc_db_pgdir(&dev->persist->pdev->dev, gfp);
+ pgdir = mlx4_alloc_db_pgdir(&dev->persist->pdev->dev);
if (!pgdir) {
ret = -ENOMEM;
goto out;
@@ -780,13 +777,13 @@
{
int err;
- err = mlx4_db_alloc(dev, &wqres->db, 1, GFP_KERNEL);
+ err = mlx4_db_alloc(dev, &wqres->db, 1);
if (err)
return err;
*wqres->db.db = 0;
- err = mlx4_buf_direct_alloc(dev, size, &wqres->buf, GFP_KERNEL);
+ err = mlx4_buf_direct_alloc(dev, size, &wqres->buf);
if (err)
goto err_db;
@@ -795,7 +792,7 @@
if (err)
goto err_buf;
- err = mlx4_buf_write_mtt(dev, &wqres->mtt, &wqres->buf, GFP_KERNEL);
+ err = mlx4_buf_write_mtt(dev, &wqres->mtt, &wqres->buf);
if (err)
goto err_mtt;
diff --git a/drivers/net/ethernet/mellanox/mlx4/cq.c b/drivers/net/ethernet/mellanox/mlx4/cq.c
index fa6d235..c56a511 100644
--- a/drivers/net/ethernet/mellanox/mlx4/cq.c
+++ b/drivers/net/ethernet/mellanox/mlx4/cq.c
@@ -224,11 +224,11 @@
if (*cqn == -1)
return -ENOMEM;
- err = mlx4_table_get(dev, &cq_table->table, *cqn, GFP_KERNEL);
+ err = mlx4_table_get(dev, &cq_table->table, *cqn);
if (err)
goto err_out;
- err = mlx4_table_get(dev, &cq_table->cmpt_table, *cqn, GFP_KERNEL);
+ err = mlx4_table_get(dev, &cq_table->cmpt_table, *cqn);
if (err)
goto err_put;
return 0;
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c
index e5fb895..436f768 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c
@@ -1042,7 +1042,7 @@
if (!context)
return -ENOMEM;
- err = mlx4_qp_alloc(mdev->dev, qpn, qp, GFP_KERNEL);
+ err = mlx4_qp_alloc(mdev->dev, qpn, qp);
if (err) {
en_err(priv, "Failed to allocate qp #%x\n", qpn);
goto out;
@@ -1086,7 +1086,7 @@
en_err(priv, "Failed reserving drop qpn\n");
return err;
}
- err = mlx4_qp_alloc(priv->mdev->dev, qpn, &priv->drop_qp, GFP_KERNEL);
+ err = mlx4_qp_alloc(priv->mdev->dev, qpn, &priv->drop_qp);
if (err) {
en_err(priv, "Failed allocating drop qp\n");
mlx4_qp_release_range(priv->mdev->dev, qpn, 1);
@@ -1158,8 +1158,7 @@
}
/* Configure RSS indirection qp */
- err = mlx4_qp_alloc(mdev->dev, priv->base_qpn, rss_map->indir_qp,
- GFP_KERNEL);
+ err = mlx4_qp_alloc(mdev->dev, priv->base_qpn, rss_map->indir_qp);
if (err) {
en_err(priv, "Failed to allocate RSS indirection QP\n");
goto rss_err;
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
index 4f3a9b2..73faa3d 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
@@ -111,7 +111,7 @@
goto err_hwq_res;
}
- err = mlx4_qp_alloc(mdev->dev, ring->qpn, &ring->sp_qp, GFP_KERNEL);
+ err = mlx4_qp_alloc(mdev->dev, ring->qpn, &ring->sp_qp);
if (err) {
en_err(priv, "Failed allocating qp %d\n", ring->qpn);
goto err_reserve;
diff --git a/drivers/net/ethernet/mellanox/mlx4/icm.c b/drivers/net/ethernet/mellanox/mlx4/icm.c
index e1f9e7c..5a7816e 100644
--- a/drivers/net/ethernet/mellanox/mlx4/icm.c
+++ b/drivers/net/ethernet/mellanox/mlx4/icm.c
@@ -251,8 +251,7 @@
MLX4_CMD_TIME_CLASS_B, MLX4_CMD_NATIVE);
}
-int mlx4_table_get(struct mlx4_dev *dev, struct mlx4_icm_table *table, u32 obj,
- gfp_t gfp)
+int mlx4_table_get(struct mlx4_dev *dev, struct mlx4_icm_table *table, u32 obj)
{
u32 i = (obj & (table->num_obj - 1)) /
(MLX4_TABLE_CHUNK_SIZE / table->obj_size);
@@ -266,7 +265,7 @@
}
table->icm[i] = mlx4_alloc_icm(dev, MLX4_TABLE_CHUNK_SIZE >> PAGE_SHIFT,
- (table->lowmem ? gfp : GFP_HIGHUSER) |
+ (table->lowmem ? GFP_KERNEL : GFP_HIGHUSER) |
__GFP_NOWARN, table->coherent);
if (!table->icm[i]) {
ret = -ENOMEM;
@@ -363,7 +362,7 @@
u32 i;
for (i = start; i <= end; i += inc) {
- err = mlx4_table_get(dev, table, i, GFP_KERNEL);
+ err = mlx4_table_get(dev, table, i);
if (err)
goto fail;
}
diff --git a/drivers/net/ethernet/mellanox/mlx4/icm.h b/drivers/net/ethernet/mellanox/mlx4/icm.h
index 0c73645..dee67fa 100644
--- a/drivers/net/ethernet/mellanox/mlx4/icm.h
+++ b/drivers/net/ethernet/mellanox/mlx4/icm.h
@@ -71,8 +71,7 @@
gfp_t gfp_mask, int coherent);
void mlx4_free_icm(struct mlx4_dev *dev, struct mlx4_icm *icm, int coherent);
-int mlx4_table_get(struct mlx4_dev *dev, struct mlx4_icm_table *table, u32 obj,
- gfp_t gfp);
+int mlx4_table_get(struct mlx4_dev *dev, struct mlx4_icm_table *table, u32 obj);
void mlx4_table_put(struct mlx4_dev *dev, struct mlx4_icm_table *table, u32 obj);
int mlx4_table_get_range(struct mlx4_dev *dev, struct mlx4_icm_table *table,
u32 start, u32 end);
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4.h b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
index 30616cd..706d7f2 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
@@ -969,7 +969,7 @@
void mlx4_cleanup_qp_table(struct mlx4_dev *dev);
void mlx4_cleanup_srq_table(struct mlx4_dev *dev);
void mlx4_cleanup_mcg_table(struct mlx4_dev *dev);
-int __mlx4_qp_alloc_icm(struct mlx4_dev *dev, int qpn, gfp_t gfp);
+int __mlx4_qp_alloc_icm(struct mlx4_dev *dev, int qpn);
void __mlx4_qp_free_icm(struct mlx4_dev *dev, int qpn);
int __mlx4_cq_alloc_icm(struct mlx4_dev *dev, int *cqn);
void __mlx4_cq_free_icm(struct mlx4_dev *dev, int cqn);
@@ -977,7 +977,7 @@
void __mlx4_srq_free_icm(struct mlx4_dev *dev, int srqn);
int __mlx4_mpt_reserve(struct mlx4_dev *dev);
void __mlx4_mpt_release(struct mlx4_dev *dev, u32 index);
-int __mlx4_mpt_alloc_icm(struct mlx4_dev *dev, u32 index, gfp_t gfp);
+int __mlx4_mpt_alloc_icm(struct mlx4_dev *dev, u32 index);
void __mlx4_mpt_free_icm(struct mlx4_dev *dev, u32 index);
u32 __mlx4_alloc_mtt_range(struct mlx4_dev *dev, int order);
void __mlx4_free_mtt_range(struct mlx4_dev *dev, u32 first_seg, int order);
diff --git a/drivers/net/ethernet/mellanox/mlx4/mr.c b/drivers/net/ethernet/mellanox/mlx4/mr.c
index ce852ca..24282cd 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mr.c
+++ b/drivers/net/ethernet/mellanox/mlx4/mr.c
@@ -479,14 +479,14 @@
__mlx4_mpt_release(dev, index);
}
-int __mlx4_mpt_alloc_icm(struct mlx4_dev *dev, u32 index, gfp_t gfp)
+int __mlx4_mpt_alloc_icm(struct mlx4_dev *dev, u32 index)
{
struct mlx4_mr_table *mr_table = &mlx4_priv(dev)->mr_table;
- return mlx4_table_get(dev, &mr_table->dmpt_table, index, gfp);
+ return mlx4_table_get(dev, &mr_table->dmpt_table, index);
}
-static int mlx4_mpt_alloc_icm(struct mlx4_dev *dev, u32 index, gfp_t gfp)
+static int mlx4_mpt_alloc_icm(struct mlx4_dev *dev, u32 index)
{
u64 param = 0;
@@ -497,7 +497,7 @@
MLX4_CMD_TIME_CLASS_A,
MLX4_CMD_WRAPPED);
}
- return __mlx4_mpt_alloc_icm(dev, index, gfp);
+ return __mlx4_mpt_alloc_icm(dev, index);
}
void __mlx4_mpt_free_icm(struct mlx4_dev *dev, u32 index)
@@ -629,7 +629,7 @@
struct mlx4_mpt_entry *mpt_entry;
int err;
- err = mlx4_mpt_alloc_icm(dev, key_to_hw_index(mr->key), GFP_KERNEL);
+ err = mlx4_mpt_alloc_icm(dev, key_to_hw_index(mr->key));
if (err)
return err;
@@ -787,14 +787,13 @@
EXPORT_SYMBOL_GPL(mlx4_write_mtt);
int mlx4_buf_write_mtt(struct mlx4_dev *dev, struct mlx4_mtt *mtt,
- struct mlx4_buf *buf, gfp_t gfp)
+ struct mlx4_buf *buf)
{
u64 *page_list;
int err;
int i;
- page_list = kmalloc(buf->npages * sizeof *page_list,
- gfp);
+ page_list = kcalloc(buf->npages, sizeof(*page_list), GFP_KERNEL);
if (!page_list)
return -ENOMEM;
@@ -841,7 +840,7 @@
struct mlx4_mpt_entry *mpt_entry;
int err;
- err = mlx4_mpt_alloc_icm(dev, key_to_hw_index(mw->key), GFP_KERNEL);
+ err = mlx4_mpt_alloc_icm(dev, key_to_hw_index(mw->key));
if (err)
return err;
diff --git a/drivers/net/ethernet/mellanox/mlx4/qp.c b/drivers/net/ethernet/mellanox/mlx4/qp.c
index 5a310d3..26747212 100644
--- a/drivers/net/ethernet/mellanox/mlx4/qp.c
+++ b/drivers/net/ethernet/mellanox/mlx4/qp.c
@@ -301,29 +301,29 @@
}
EXPORT_SYMBOL_GPL(mlx4_qp_release_range);
-int __mlx4_qp_alloc_icm(struct mlx4_dev *dev, int qpn, gfp_t gfp)
+int __mlx4_qp_alloc_icm(struct mlx4_dev *dev, int qpn)
{
struct mlx4_priv *priv = mlx4_priv(dev);
struct mlx4_qp_table *qp_table = &priv->qp_table;
int err;
- err = mlx4_table_get(dev, &qp_table->qp_table, qpn, gfp);
+ err = mlx4_table_get(dev, &qp_table->qp_table, qpn);
if (err)
goto err_out;
- err = mlx4_table_get(dev, &qp_table->auxc_table, qpn, gfp);
+ err = mlx4_table_get(dev, &qp_table->auxc_table, qpn);
if (err)
goto err_put_qp;
- err = mlx4_table_get(dev, &qp_table->altc_table, qpn, gfp);
+ err = mlx4_table_get(dev, &qp_table->altc_table, qpn);
if (err)
goto err_put_auxc;
- err = mlx4_table_get(dev, &qp_table->rdmarc_table, qpn, gfp);
+ err = mlx4_table_get(dev, &qp_table->rdmarc_table, qpn);
if (err)
goto err_put_altc;
- err = mlx4_table_get(dev, &qp_table->cmpt_table, qpn, gfp);
+ err = mlx4_table_get(dev, &qp_table->cmpt_table, qpn);
if (err)
goto err_put_rdmarc;
@@ -345,7 +345,7 @@
return err;
}
-static int mlx4_qp_alloc_icm(struct mlx4_dev *dev, int qpn, gfp_t gfp)
+static int mlx4_qp_alloc_icm(struct mlx4_dev *dev, int qpn)
{
u64 param = 0;
@@ -355,7 +355,7 @@
MLX4_CMD_ALLOC_RES, MLX4_CMD_TIME_CLASS_A,
MLX4_CMD_WRAPPED);
}
- return __mlx4_qp_alloc_icm(dev, qpn, gfp);
+ return __mlx4_qp_alloc_icm(dev, qpn);
}
void __mlx4_qp_free_icm(struct mlx4_dev *dev, int qpn)
@@ -397,7 +397,7 @@
return qp;
}
-int mlx4_qp_alloc(struct mlx4_dev *dev, int qpn, struct mlx4_qp *qp, gfp_t gfp)
+int mlx4_qp_alloc(struct mlx4_dev *dev, int qpn, struct mlx4_qp *qp)
{
struct mlx4_priv *priv = mlx4_priv(dev);
struct mlx4_qp_table *qp_table = &priv->qp_table;
@@ -408,7 +408,7 @@
qp->qpn = qpn;
- err = mlx4_qp_alloc_icm(dev, qpn, gfp);
+ err = mlx4_qp_alloc_icm(dev, qpn);
if (err)
return err;
diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
index 8127838..215e21c 100644
--- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
+++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
@@ -1822,7 +1822,7 @@
return err;
if (!fw_reserved(dev, qpn)) {
- err = __mlx4_qp_alloc_icm(dev, qpn, GFP_KERNEL);
+ err = __mlx4_qp_alloc_icm(dev, qpn);
if (err) {
res_abort_move(dev, slave, RES_QP, qpn);
return err;
@@ -1909,7 +1909,7 @@
if (err)
return err;
- err = __mlx4_mpt_alloc_icm(dev, mpt->key, GFP_KERNEL);
+ err = __mlx4_mpt_alloc_icm(dev, mpt->key);
if (err) {
res_abort_move(dev, slave, RES_MPT, id);
return err;
diff --git a/drivers/net/ethernet/mellanox/mlx4/srq.c b/drivers/net/ethernet/mellanox/mlx4/srq.c
index f44d089..bedf521 100644
--- a/drivers/net/ethernet/mellanox/mlx4/srq.c
+++ b/drivers/net/ethernet/mellanox/mlx4/srq.c
@@ -100,11 +100,11 @@
if (*srqn == -1)
return -ENOMEM;
- err = mlx4_table_get(dev, &srq_table->table, *srqn, GFP_KERNEL);
+ err = mlx4_table_get(dev, &srq_table->table, *srqn);
if (err)
goto err_out;
- err = mlx4_table_get(dev, &srq_table->cmpt_table, *srqn, GFP_KERNEL);
+ err = mlx4_table_get(dev, &srq_table->cmpt_table, *srqn);
if (err)
goto err_put;
return 0;
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Makefile b/drivers/net/ethernet/mellanox/mlx5/core/Makefile
index ca36744..9d17e4e 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/Makefile
+++ b/drivers/net/ethernet/mellanox/mlx5/core/Makefile
@@ -4,14 +4,14 @@
mlx5_core-y := main.o cmd.o debugfs.o fw.o eq.o uar.o pagealloc.o \
health.o mcg.o cq.o srq.o alloc.o qp.o port.o mr.o pd.o \
mad.o transobj.o vport.o sriov.o fs_cmd.o fs_core.o \
- fs_counters.o rl.o lag.o dev.o lib/gid.o
+ fs_counters.o rl.o lag.o dev.o wq.o lib/gid.o
mlx5_core-$(CONFIG_MLX5_ACCEL) += accel/ipsec.o
mlx5_core-$(CONFIG_MLX5_FPGA) += fpga/cmd.o fpga/core.o fpga/conn.o fpga/sdk.o \
fpga/ipsec.o
-mlx5_core-$(CONFIG_MLX5_CORE_EN) += wq.o eswitch.o eswitch_offloads.o \
+mlx5_core-$(CONFIG_MLX5_CORE_EN) += eswitch.o eswitch_offloads.o \
en_main.o en_common.o en_fs.o en_ethtool.o en_tx.o \
en_rx.o en_rx_am.o en_txrx.o en_clock.o vxlan.o \
en_tc.o en_arfs.o en_rep.o en_fs_ethtool.o en_selftest.o
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/accel/Makefile b/drivers/net/ethernet/mellanox/mlx5/core/accel/Makefile
new file mode 100644
index 0000000..d8e1711
--- /dev/null
+++ b/drivers/net/ethernet/mellanox/mlx5/core/accel/Makefile
@@ -0,0 +1 @@
+subdir-ccflags-y += -I$(src)/..
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
index f5a2c60..31cbe5e 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
@@ -786,6 +786,10 @@
mlx5_cmd_comp_handler(dev, 1UL << ent->idx, true);
}
+static void free_msg(struct mlx5_core_dev *dev, struct mlx5_cmd_msg *msg);
+static void mlx5_free_cmd_msg(struct mlx5_core_dev *dev,
+ struct mlx5_cmd_msg *msg);
+
static void cmd_work_handler(struct work_struct *work)
{
struct mlx5_cmd_work_ent *ent = container_of(work, struct mlx5_cmd_work_ent, work);
@@ -796,17 +800,28 @@
struct semaphore *sem;
unsigned long flags;
bool poll_cmd = ent->polling;
+ int alloc_ret;
sem = ent->page_queue ? &cmd->pages_sem : &cmd->sem;
down(sem);
if (!ent->page_queue) {
- ent->idx = alloc_ent(cmd);
- if (ent->idx < 0) {
+ alloc_ret = alloc_ent(cmd);
+ if (alloc_ret < 0) {
mlx5_core_err(dev, "failed to allocate command entry\n");
+ if (ent->callback) {
+ ent->callback(-EAGAIN, ent->context);
+ mlx5_free_cmd_msg(dev, ent->out);
+ free_msg(dev, ent->in);
+ free_cmd(ent);
+ } else {
+ ent->ret = -EAGAIN;
+ complete(&ent->done);
+ }
up(sem);
return;
}
+ ent->idx = alloc_ret;
} else {
ent->idx = cmd->max_reg_cmds;
spin_lock_irqsave(&cmd->alloc_lock, flags);
@@ -967,7 +982,7 @@
err = wait_func(dev, ent);
if (err == -ETIMEDOUT)
- goto out_free;
+ goto out;
ds = ent->ts2 - ent->ts1;
op = MLX5_GET(mbox_in, in->first.data, opcode);
@@ -1430,6 +1445,7 @@
mlx5_core_err(dev, "Command completion arrived after timeout (entry idx = %d).\n",
ent->idx);
free_ent(cmd, ent->idx);
+ free_cmd(ent);
}
continue;
}
@@ -1488,7 +1504,8 @@
free_msg(dev, ent->in);
err = err ? err : ent->status;
- free_cmd(ent);
+ if (!forced)
+ free_cmd(ent);
callback(err, context);
} else {
complete(&ent->done);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h
index e1b7ddf..0039b47 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h
@@ -266,6 +266,14 @@
};
#endif
+#define MAX_PIN_NUM 8
+struct mlx5e_pps {
+ u8 pin_caps[MAX_PIN_NUM];
+ struct work_struct out_work;
+ u64 start[MAX_PIN_NUM];
+ u8 enabled;
+};
+
struct mlx5e_tstamp {
rwlock_t lock;
struct cyclecounter cycles;
@@ -277,7 +285,7 @@
struct mlx5_core_dev *mdev;
struct ptp_clock *ptp;
struct ptp_clock_info ptp_info;
- u8 *pps_pin_caps;
+ struct mlx5e_pps pps_info;
};
enum {
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/Makefile b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/Makefile
new file mode 100644
index 0000000..d8e1711
--- /dev/null
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/Makefile
@@ -0,0 +1 @@
+subdir-ccflags-y += -I$(src)/..
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_rxtx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_rxtx.c
index 4a78aef..4614ddf 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_rxtx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_rxtx.c
@@ -372,7 +372,7 @@
*/
mlx5e_ipsec_inverse_table[1] = htons(0xFFFF);
for (mss = 2; mss < MAX_LSO_MSS; mss++) {
- mss_inv = ((1ULL << 32) / mss) >> 16;
+ mss_inv = div_u64(1ULL << 32, mss) >> 16;
mlx5e_ipsec_inverse_table[mss] = htons(mss_inv);
}
}
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_clock.c b/drivers/net/ethernet/mellanox/mlx5/core/en_clock.c
index 66f43238..84dd63e 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_clock.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_clock.c
@@ -53,6 +53,15 @@
MLX5E_EVENT_MODE_ONCE_TILL_ARM = 0x2,
};
+enum {
+ MLX5E_MTPPS_FS_ENABLE = BIT(0x0),
+ MLX5E_MTPPS_FS_PATTERN = BIT(0x2),
+ MLX5E_MTPPS_FS_PIN_MODE = BIT(0x3),
+ MLX5E_MTPPS_FS_TIME_STAMP = BIT(0x4),
+ MLX5E_MTPPS_FS_OUT_PULSE_DURATION = BIT(0x5),
+ MLX5E_MTPPS_FS_ENH_OUT_PER_ADJ = BIT(0x7),
+};
+
void mlx5e_fill_hwstamp(struct mlx5e_tstamp *tstamp, u64 timestamp,
struct skb_shared_hwtstamps *hwts)
{
@@ -73,17 +82,46 @@
return mlx5_read_internal_timer(tstamp->mdev) & cc->mask;
}
+static void mlx5e_pps_out(struct work_struct *work)
+{
+ struct mlx5e_pps *pps_info = container_of(work, struct mlx5e_pps,
+ out_work);
+ struct mlx5e_tstamp *tstamp = container_of(pps_info, struct mlx5e_tstamp,
+ pps_info);
+ u32 in[MLX5_ST_SZ_DW(mtpps_reg)] = {0};
+ unsigned long flags;
+ int i;
+
+ for (i = 0; i < tstamp->ptp_info.n_pins; i++) {
+ u64 tstart;
+
+ write_lock_irqsave(&tstamp->lock, flags);
+ tstart = tstamp->pps_info.start[i];
+ tstamp->pps_info.start[i] = 0;
+ write_unlock_irqrestore(&tstamp->lock, flags);
+ if (!tstart)
+ continue;
+
+ MLX5_SET(mtpps_reg, in, pin, i);
+ MLX5_SET64(mtpps_reg, in, time_stamp, tstart);
+ MLX5_SET(mtpps_reg, in, field_select, MLX5E_MTPPS_FS_TIME_STAMP);
+ mlx5_set_mtpps(tstamp->mdev, in, sizeof(in));
+ }
+}
+
static void mlx5e_timestamp_overflow(struct work_struct *work)
{
struct delayed_work *dwork = to_delayed_work(work);
struct mlx5e_tstamp *tstamp = container_of(dwork, struct mlx5e_tstamp,
overflow_work);
+ struct mlx5e_priv *priv = container_of(tstamp, struct mlx5e_priv, tstamp);
unsigned long flags;
write_lock_irqsave(&tstamp->lock, flags);
timecounter_read(&tstamp->clock);
write_unlock_irqrestore(&tstamp->lock, flags);
- schedule_delayed_work(&tstamp->overflow_work, tstamp->overflow_period);
+ queue_delayed_work(priv->wq, &tstamp->overflow_work,
+ msecs_to_jiffies(tstamp->overflow_period * 1000));
}
int mlx5e_hwstamp_set(struct mlx5e_priv *priv, struct ifreq *ifr)
@@ -213,18 +251,6 @@
int neg_adj = 0;
struct mlx5e_tstamp *tstamp = container_of(ptp, struct mlx5e_tstamp,
ptp_info);
- struct mlx5e_priv *priv =
- container_of(tstamp, struct mlx5e_priv, tstamp);
-
- if (MLX5_CAP_GEN(priv->mdev, pps_modify)) {
- u32 in[MLX5_ST_SZ_DW(mtpps_reg)] = {0};
-
- /* For future use need to add a loop for finding all 1PPS out pins */
- MLX5_SET(mtpps_reg, in, pin_mode, MLX5E_PIN_MODE_OUT);
- MLX5_SET(mtpps_reg, in, out_periodic_adjustment, delta & 0xFFFF);
-
- mlx5_set_mtpps(priv->mdev, in, sizeof(in));
- }
if (delta < 0) {
neg_adj = 1;
@@ -253,12 +279,13 @@
struct mlx5e_priv *priv =
container_of(tstamp, struct mlx5e_priv, tstamp);
u32 in[MLX5_ST_SZ_DW(mtpps_reg)] = {0};
+ u32 field_select = 0;
+ u8 pin_mode = 0;
u8 pattern = 0;
int pin = -1;
int err = 0;
- if (!MLX5_CAP_GEN(priv->mdev, pps) ||
- !MLX5_CAP_GEN(priv->mdev, pps_modify))
+ if (!MLX5_PPS_CAP(priv->mdev))
return -EOPNOTSUPP;
if (rq->extts.index >= tstamp->ptp_info.n_pins)
@@ -268,15 +295,21 @@
pin = ptp_find_pin(tstamp->ptp, PTP_PF_EXTTS, rq->extts.index);
if (pin < 0)
return -EBUSY;
+ pin_mode = MLX5E_PIN_MODE_IN;
+ pattern = !!(rq->extts.flags & PTP_FALLING_EDGE);
+ field_select = MLX5E_MTPPS_FS_PIN_MODE |
+ MLX5E_MTPPS_FS_PATTERN |
+ MLX5E_MTPPS_FS_ENABLE;
+ } else {
+ pin = rq->extts.index;
+ field_select = MLX5E_MTPPS_FS_ENABLE;
}
- if (rq->extts.flags & PTP_FALLING_EDGE)
- pattern = 1;
-
MLX5_SET(mtpps_reg, in, pin, pin);
- MLX5_SET(mtpps_reg, in, pin_mode, MLX5E_PIN_MODE_IN);
+ MLX5_SET(mtpps_reg, in, pin_mode, pin_mode);
MLX5_SET(mtpps_reg, in, pattern, pattern);
MLX5_SET(mtpps_reg, in, enable, on);
+ MLX5_SET(mtpps_reg, in, field_select, field_select);
err = mlx5_set_mtpps(priv->mdev, in, sizeof(in));
if (err)
@@ -295,14 +328,18 @@
struct mlx5e_priv *priv =
container_of(tstamp, struct mlx5e_priv, tstamp);
u32 in[MLX5_ST_SZ_DW(mtpps_reg)] = {0};
- u64 nsec_now, nsec_delta, time_stamp;
+ u64 nsec_now, nsec_delta, time_stamp = 0;
u64 cycles_now, cycles_delta;
struct timespec64 ts;
unsigned long flags;
+ u32 field_select = 0;
+ u8 pin_mode = 0;
+ u8 pattern = 0;
int pin = -1;
+ int err = 0;
s64 ns;
- if (!MLX5_CAP_GEN(priv->mdev, pps_modify))
+ if (!MLX5_PPS_CAP(priv->mdev))
return -EOPNOTSUPP;
if (rq->perout.index >= tstamp->ptp_info.n_pins)
@@ -313,32 +350,60 @@
rq->perout.index);
if (pin < 0)
return -EBUSY;
- }
- ts.tv_sec = rq->perout.period.sec;
- ts.tv_nsec = rq->perout.period.nsec;
- ns = timespec64_to_ns(&ts);
- if (on)
+ pin_mode = MLX5E_PIN_MODE_OUT;
+ pattern = MLX5E_OUT_PATTERN_PERIODIC;
+ ts.tv_sec = rq->perout.period.sec;
+ ts.tv_nsec = rq->perout.period.nsec;
+ ns = timespec64_to_ns(&ts);
+
if ((ns >> 1) != 500000000LL)
return -EINVAL;
- ts.tv_sec = rq->perout.start.sec;
- ts.tv_nsec = rq->perout.start.nsec;
- ns = timespec64_to_ns(&ts);
- cycles_now = mlx5_read_internal_timer(tstamp->mdev);
- write_lock_irqsave(&tstamp->lock, flags);
- nsec_now = timecounter_cyc2time(&tstamp->clock, cycles_now);
- nsec_delta = ns - nsec_now;
- cycles_delta = div64_u64(nsec_delta << tstamp->cycles.shift,
- tstamp->cycles.mult);
- write_unlock_irqrestore(&tstamp->lock, flags);
- time_stamp = cycles_now + cycles_delta;
+
+ ts.tv_sec = rq->perout.start.sec;
+ ts.tv_nsec = rq->perout.start.nsec;
+ ns = timespec64_to_ns(&ts);
+ cycles_now = mlx5_read_internal_timer(tstamp->mdev);
+ write_lock_irqsave(&tstamp->lock, flags);
+ nsec_now = timecounter_cyc2time(&tstamp->clock, cycles_now);
+ nsec_delta = ns - nsec_now;
+ cycles_delta = div64_u64(nsec_delta << tstamp->cycles.shift,
+ tstamp->cycles.mult);
+ write_unlock_irqrestore(&tstamp->lock, flags);
+ time_stamp = cycles_now + cycles_delta;
+ field_select = MLX5E_MTPPS_FS_PIN_MODE |
+ MLX5E_MTPPS_FS_PATTERN |
+ MLX5E_MTPPS_FS_ENABLE |
+ MLX5E_MTPPS_FS_TIME_STAMP;
+ } else {
+ pin = rq->perout.index;
+ field_select = MLX5E_MTPPS_FS_ENABLE;
+ }
+
MLX5_SET(mtpps_reg, in, pin, pin);
- MLX5_SET(mtpps_reg, in, pin_mode, MLX5E_PIN_MODE_OUT);
- MLX5_SET(mtpps_reg, in, pattern, MLX5E_OUT_PATTERN_PERIODIC);
+ MLX5_SET(mtpps_reg, in, pin_mode, pin_mode);
+ MLX5_SET(mtpps_reg, in, pattern, pattern);
MLX5_SET(mtpps_reg, in, enable, on);
MLX5_SET64(mtpps_reg, in, time_stamp, time_stamp);
+ MLX5_SET(mtpps_reg, in, field_select, field_select);
- return mlx5_set_mtpps(priv->mdev, in, sizeof(in));
+ err = mlx5_set_mtpps(priv->mdev, in, sizeof(in));
+ if (err)
+ return err;
+
+ return mlx5_set_mtppse(priv->mdev, pin, 0,
+ MLX5E_EVENT_MODE_REPETETIVE & on);
+}
+
+static int mlx5e_pps_configure(struct ptp_clock_info *ptp,
+ struct ptp_clock_request *rq,
+ int on)
+{
+ struct mlx5e_tstamp *tstamp =
+ container_of(ptp, struct mlx5e_tstamp, ptp_info);
+
+ tstamp->pps_info.enabled = !!on;
+ return 0;
}
static int mlx5e_ptp_enable(struct ptp_clock_info *ptp,
@@ -350,6 +415,8 @@
return mlx5e_extts_configure(ptp, rq, on);
case PTP_CLK_REQ_PEROUT:
return mlx5e_perout_configure(ptp, rq, on);
+ case PTP_CLK_REQ_PPS:
+ return mlx5e_pps_configure(ptp, rq, on);
default:
return -EOPNOTSUPP;
}
@@ -395,6 +462,7 @@
return -ENOMEM;
tstamp->ptp_info.enable = mlx5e_ptp_enable;
tstamp->ptp_info.verify = mlx5e_ptp_verify;
+ tstamp->ptp_info.pps = 1;
for (i = 0; i < tstamp->ptp_info.n_pins; i++) {
snprintf(tstamp->ptp_info.pin_config[i].name,
@@ -422,22 +490,56 @@
tstamp->ptp_info.n_per_out = MLX5_GET(mtpps_reg, out,
cap_max_num_of_pps_out_pins);
- tstamp->pps_pin_caps[0] = MLX5_GET(mtpps_reg, out, cap_pin_0_mode);
- tstamp->pps_pin_caps[1] = MLX5_GET(mtpps_reg, out, cap_pin_1_mode);
- tstamp->pps_pin_caps[2] = MLX5_GET(mtpps_reg, out, cap_pin_2_mode);
- tstamp->pps_pin_caps[3] = MLX5_GET(mtpps_reg, out, cap_pin_3_mode);
- tstamp->pps_pin_caps[4] = MLX5_GET(mtpps_reg, out, cap_pin_4_mode);
- tstamp->pps_pin_caps[5] = MLX5_GET(mtpps_reg, out, cap_pin_5_mode);
- tstamp->pps_pin_caps[6] = MLX5_GET(mtpps_reg, out, cap_pin_6_mode);
- tstamp->pps_pin_caps[7] = MLX5_GET(mtpps_reg, out, cap_pin_7_mode);
+ tstamp->pps_info.pin_caps[0] = MLX5_GET(mtpps_reg, out, cap_pin_0_mode);
+ tstamp->pps_info.pin_caps[1] = MLX5_GET(mtpps_reg, out, cap_pin_1_mode);
+ tstamp->pps_info.pin_caps[2] = MLX5_GET(mtpps_reg, out, cap_pin_2_mode);
+ tstamp->pps_info.pin_caps[3] = MLX5_GET(mtpps_reg, out, cap_pin_3_mode);
+ tstamp->pps_info.pin_caps[4] = MLX5_GET(mtpps_reg, out, cap_pin_4_mode);
+ tstamp->pps_info.pin_caps[5] = MLX5_GET(mtpps_reg, out, cap_pin_5_mode);
+ tstamp->pps_info.pin_caps[6] = MLX5_GET(mtpps_reg, out, cap_pin_6_mode);
+ tstamp->pps_info.pin_caps[7] = MLX5_GET(mtpps_reg, out, cap_pin_7_mode);
}
void mlx5e_pps_event_handler(struct mlx5e_priv *priv,
struct ptp_clock_event *event)
{
+ struct net_device *netdev = priv->netdev;
struct mlx5e_tstamp *tstamp = &priv->tstamp;
+ struct timespec64 ts;
+ u64 nsec_now, nsec_delta;
+ u64 cycles_now, cycles_delta;
+ int pin = event->index;
+ s64 ns;
+ unsigned long flags;
- ptp_clock_event(tstamp->ptp, event);
+ switch (tstamp->ptp_info.pin_config[pin].func) {
+ case PTP_PF_EXTTS:
+ if (tstamp->pps_info.enabled) {
+ event->type = PTP_CLOCK_PPSUSR;
+ event->pps_times.ts_real = ns_to_timespec64(event->timestamp);
+ } else {
+ event->type = PTP_CLOCK_EXTTS;
+ }
+ ptp_clock_event(tstamp->ptp, event);
+ break;
+ case PTP_PF_PEROUT:
+ mlx5e_ptp_gettime(&tstamp->ptp_info, &ts);
+ cycles_now = mlx5_read_internal_timer(tstamp->mdev);
+ ts.tv_sec += 1;
+ ts.tv_nsec = 0;
+ ns = timespec64_to_ns(&ts);
+ write_lock_irqsave(&tstamp->lock, flags);
+ nsec_now = timecounter_cyc2time(&tstamp->clock, cycles_now);
+ nsec_delta = ns - nsec_now;
+ cycles_delta = div64_u64(nsec_delta << tstamp->cycles.shift,
+ tstamp->cycles.mult);
+ tstamp->pps_info.start[pin] = cycles_now + cycles_delta;
+ queue_work(priv->wq, &tstamp->pps_info.out_work);
+ write_unlock_irqrestore(&tstamp->lock, flags);
+ break;
+ default:
+ netdev_err(netdev, "%s: Unhandled event\n", __func__);
+ }
}
void mlx5e_timestamp_init(struct mlx5e_priv *priv)
@@ -473,9 +575,10 @@
do_div(ns, NSEC_PER_SEC / 2 / HZ);
tstamp->overflow_period = ns;
+ INIT_WORK(&tstamp->pps_info.out_work, mlx5e_pps_out);
INIT_DELAYED_WORK(&tstamp->overflow_work, mlx5e_timestamp_overflow);
if (tstamp->overflow_period)
- schedule_delayed_work(&tstamp->overflow_work, 0);
+ queue_delayed_work(priv->wq, &tstamp->overflow_work, 0);
else
mlx5_core_warn(priv->mdev, "invalid overflow period, overflow_work is not scheduled\n");
@@ -484,16 +587,10 @@
snprintf(tstamp->ptp_info.name, 16, "mlx5 ptp");
/* Initialize 1PPS data structures */
-#define MAX_PIN_NUM 8
- tstamp->pps_pin_caps = kzalloc(sizeof(u8) * MAX_PIN_NUM, GFP_KERNEL);
- if (tstamp->pps_pin_caps) {
- if (MLX5_CAP_GEN(priv->mdev, pps))
- mlx5e_get_pps_caps(priv, tstamp);
- if (tstamp->ptp_info.n_pins)
- mlx5e_init_pin_config(tstamp);
- } else {
- mlx5_core_warn(priv->mdev, "1PPS initialization failed\n");
- }
+ if (MLX5_PPS_CAP(priv->mdev))
+ mlx5e_get_pps_caps(priv, tstamp);
+ if (tstamp->ptp_info.n_pins)
+ mlx5e_init_pin_config(tstamp);
tstamp->ptp = ptp_clock_register(&tstamp->ptp_info,
&priv->mdev->pdev->dev);
@@ -516,8 +613,7 @@
priv->tstamp.ptp = NULL;
}
- kfree(tstamp->pps_pin_caps);
- kfree(tstamp->ptp_info.pin_config);
-
+ cancel_work_sync(&tstamp->pps_info.out_work);
cancel_delayed_work_sync(&tstamp->overflow_work);
+ kfree(tstamp->ptp_info.pin_config);
}
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c
index 8fa23f6..2eb54d3 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c
@@ -464,6 +464,8 @@
if (!perm_addr)
return;
+ memset(perm_addr, 0xff, MAX_ADDR_LEN);
+
mlx5_query_nic_vport_mac_address(priv->mdev, 0, perm_addr);
}
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_fs_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_fs_ethtool.c
index bdd82c9..eafc592 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_fs_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_fs_ethtool.c
@@ -276,7 +276,7 @@
static bool outer_header_zero(u32 *match_criteria)
{
- int size = MLX5_ST_SZ_BYTES(fte_match_param);
+ int size = MLX5_FLD_SZ_BYTES(fte_match_param, outer_headers);
char *outer_headers_c = MLX5_ADDR_OF(fte_match_param, match_criteria,
outer_headers);
@@ -320,7 +320,7 @@
spec->match_criteria_enable = (!outer_header_zero(spec->match_criteria));
flow_act.flow_tag = MLX5_FS_DEFAULT_FLOW_TAG;
- rule = mlx5_add_flow_rules(ft, spec, &flow_act, dst, 1);
+ rule = mlx5_add_flow_rules(ft, spec, &flow_act, dst, dst ? 1 : 0);
if (IS_ERR(rule)) {
err = PTR_ERR(rule);
netdev_err(priv->netdev, "%s: failed to add ethtool steering rule: %d\n",
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 1eac500..57f31fa 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -377,7 +377,6 @@
break;
case MLX5_DEV_EVENT_PPS:
eqe = (struct mlx5_eqe *)param;
- ptp_event.type = PTP_CLOCK_EXTTS;
ptp_event.index = eqe->data.pps.pin;
ptp_event.timestamp =
timecounter_cyc2time(&priv->tstamp.clock,
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eq.c b/drivers/net/ethernet/mellanox/mlx5/core/eq.c
index af51a5d..52b9a64 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eq.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eq.c
@@ -698,7 +698,7 @@
else
mlx5_core_dbg(dev, "port_module_event is not set\n");
- if (MLX5_CAP_GEN(dev, pps))
+ if (MLX5_PPS_CAP(dev))
async_event_mask |= (1ull << MLX5_EVENT_TYPE_PPS_EVENT);
if (MLX5_CAP_GEN(dev, fpga))
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
index 89bfda4..8b18cc9 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
@@ -1668,7 +1668,8 @@
int i;
if (!esw || !MLX5_CAP_GEN(esw->dev, vport_group_manager) ||
- MLX5_CAP_GEN(esw->dev, port_type) != MLX5_CAP_PORT_TYPE_ETH)
+ MLX5_CAP_GEN(esw->dev, port_type) != MLX5_CAP_PORT_TYPE_ETH ||
+ esw->mode == SRIOV_NONE)
return;
esw_info(esw->dev, "disable SRIOV: active vports(%d) mode(%d)\n",
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fpga/Makefile b/drivers/net/ethernet/mellanox/mlx5/core/fpga/Makefile
new file mode 100644
index 0000000..d8e1711
--- /dev/null
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fpga/Makefile
@@ -0,0 +1 @@
+subdir-ccflags-y += -I$(src)/..
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fpga/core.c b/drivers/net/ethernet/mellanox/mlx5/core/fpga/core.c
index 31e5a26..9034e99 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fpga/core.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fpga/core.c
@@ -102,7 +102,7 @@
return 0;
}
-int mlx5_fpga_device_brb(struct mlx5_fpga_device *fdev)
+static int mlx5_fpga_device_brb(struct mlx5_fpga_device *fdev)
{
int err;
struct mlx5_core_dev *mdev = fdev->mdev;
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fpga/ipsec.c b/drivers/net/ethernet/mellanox/mlx5/core/fpga/ipsec.c
index 42970e2..35d0e33 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fpga/ipsec.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fpga/ipsec.c
@@ -275,7 +275,7 @@
{
struct mlx5_fpga_device *fdev = mdev->fpga;
unsigned int i;
- u32 *data;
+ __be32 *data;
u32 count;
u64 addr;
int ret;
@@ -290,7 +290,7 @@
count = mlx5_fpga_ipsec_counters_count(mdev);
- data = kzalloc(sizeof(u32) * count * 2, GFP_KERNEL);
+ data = kzalloc(sizeof(*data) * count * 2, GFP_KERNEL);
if (!data) {
ret = -ENOMEM;
goto out;
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/Makefile b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/Makefile
new file mode 100644
index 0000000..d8e1711
--- /dev/null
+++ b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/Makefile
@@ -0,0 +1 @@
+subdir-ccflags-y += -I$(src)/..
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c
index 1ee5bce..8529805 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c
@@ -178,8 +178,6 @@
static void mlx5i_destroy_underlay_qp(struct mlx5_core_dev *mdev, struct mlx5_core_qp *qp)
{
- mlx5_fs_remove_rx_underlay_qpn(mdev, qp->qpn);
-
mlx5_core_destroy_qp(mdev, qp);
}
@@ -194,8 +192,6 @@
return err;
}
- mlx5_fs_add_rx_underlay_qpn(priv->mdev, ipriv->qp.qpn);
-
err = mlx5e_create_tis(priv->mdev, 0 /* tc */, ipriv->qp.qpn, &priv->tisn[0]);
if (err) {
mlx5_core_warn(priv->mdev, "create tis failed, %d\n", err);
@@ -253,6 +249,7 @@
static int mlx5i_init_rx(struct mlx5e_priv *priv)
{
+ struct mlx5i_priv *ipriv = priv->ppriv;
int err;
err = mlx5e_create_indirect_rqt(priv);
@@ -271,12 +268,18 @@
if (err)
goto err_destroy_indirect_tirs;
- err = mlx5i_create_flow_steering(priv);
+ err = mlx5_fs_add_rx_underlay_qpn(priv->mdev, ipriv->qp.qpn);
if (err)
goto err_destroy_direct_tirs;
+ err = mlx5i_create_flow_steering(priv);
+ if (err)
+ goto err_remove_rx_underlay_qpn;
+
return 0;
+err_remove_rx_underlay_qpn:
+ mlx5_fs_remove_rx_underlay_qpn(priv->mdev, ipriv->qp.qpn);
err_destroy_direct_tirs:
mlx5e_destroy_direct_tirs(priv);
err_destroy_indirect_tirs:
@@ -290,6 +293,9 @@
static void mlx5i_cleanup_rx(struct mlx5e_priv *priv)
{
+ struct mlx5i_priv *ipriv = priv->ppriv;
+
+ mlx5_fs_remove_rx_underlay_qpn(priv->mdev, ipriv->qp.qpn);
mlx5i_destroy_flow_steering(priv);
mlx5e_destroy_direct_tirs(priv);
mlx5e_destroy_indirect_tirs(priv);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lag.c b/drivers/net/ethernet/mellanox/mlx5/core/lag.c
index a3a836b..f26f97f 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lag.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lag.c
@@ -162,22 +162,17 @@
static void mlx5_infer_tx_affinity_mapping(struct lag_tracker *tracker,
u8 *port1, u8 *port2)
{
- if (tracker->tx_type == NETDEV_LAG_TX_TYPE_ACTIVEBACKUP) {
- if (tracker->netdev_state[0].tx_enabled) {
- *port1 = 1;
- *port2 = 1;
- } else {
- *port1 = 2;
- *port2 = 2;
- }
- } else {
- *port1 = 1;
- *port2 = 2;
- if (!tracker->netdev_state[0].link_up)
- *port1 = 2;
- else if (!tracker->netdev_state[1].link_up)
- *port2 = 1;
+ *port1 = 1;
+ *port2 = 2;
+ if (!tracker->netdev_state[0].tx_enabled ||
+ !tracker->netdev_state[0].link_up) {
+ *port1 = 2;
+ return;
}
+
+ if (!tracker->netdev_state[1].tx_enabled ||
+ !tracker->netdev_state[1].link_up)
+ *port2 = 1;
}
static void mlx5_activate_lag(struct mlx5_lag *ldev,
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/Makefile b/drivers/net/ethernet/mellanox/mlx5/core/lib/Makefile
new file mode 100644
index 0000000..d8e1711
--- /dev/null
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/Makefile
@@ -0,0 +1 @@
+subdir-ccflags-y += -I$(src)/..
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/gid.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/gid.c
index de2aed4..573f59f 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lib/gid.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/gid.c
@@ -34,6 +34,7 @@
#include <linux/etherdevice.h>
#include <linux/idr.h>
#include "mlx5_core.h"
+#include "lib/mlx5.h"
void mlx5_init_reserved_gids(struct mlx5_core_dev *dev)
{
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h b/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h
index 6a3d6be..6a263e8 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h
@@ -154,6 +154,11 @@
int mlx5_query_mtppse(struct mlx5_core_dev *mdev, u8 pin, u8 *arm, u8 *mode);
int mlx5_set_mtppse(struct mlx5_core_dev *mdev, u8 pin, u8 arm, u8 mode);
+#define MLX5_PPS_CAP(mdev) (MLX5_CAP_GEN((mdev), pps) && \
+ MLX5_CAP_GEN((mdev), pps_modify) && \
+ MLX5_CAP_MCAM_FEATURE((mdev), mtpps_fs) && \
+ MLX5_CAP_MCAM_FEATURE((mdev), mtpps_enh_out_per_adj))
+
int mlx5_firmware_flash(struct mlx5_core_dev *dev, const struct firmware *fw);
void mlx5e_init(void);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/sriov.c b/drivers/net/ethernet/mellanox/mlx5/core/sriov.c
index bcdf777..bf99d40 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/sriov.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/sriov.c
@@ -88,7 +88,11 @@
int vf;
if (!sriov->enabled_vfs)
+#ifdef CONFIG_MLX5_CORE_EN
+ goto disable_sriov_resources;
+#else
return;
+#endif
for (vf = 0; vf < sriov->num_vfs; vf++) {
if (!sriov->vfs_ctx[vf].enabled)
@@ -103,6 +107,7 @@
}
#ifdef CONFIG_MLX5_CORE_EN
+disable_sriov_resources:
mlx5_eswitch_disable_sriov(dev->priv.eswitch);
#endif
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c
index 192cb93..4b2e0fd 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c
@@ -1512,6 +1512,10 @@
static int mlxsw_sp_fib_entry_update(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_fib_entry *fib_entry);
+static bool
+mlxsw_sp_fib_node_entry_is_first(const struct mlxsw_sp_fib_node *fib_node,
+ const struct mlxsw_sp_fib_entry *fib_entry);
+
static int
mlxsw_sp_nexthop_fib_entries_update(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_nexthop_group *nh_grp)
@@ -1520,6 +1524,9 @@
int err;
list_for_each_entry(fib_entry, &nh_grp->fib_list, nexthop_group_node) {
+ if (!mlxsw_sp_fib_node_entry_is_first(fib_entry->fib_node,
+ fib_entry))
+ continue;
err = mlxsw_sp_fib_entry_update(mlxsw_sp, fib_entry);
if (err)
return err;
@@ -1790,6 +1797,7 @@
return 0;
err_nexthop_neigh_init:
+ mlxsw_sp_nexthop_rif_fini(nh);
mlxsw_sp_nexthop_remove(mlxsw_sp, nh);
return err;
}
@@ -1866,6 +1874,7 @@
nh_grp->gateway = fi->fib_nh->nh_scope == RT_SCOPE_LINK;
nh_grp->count = fi->fib_nhs;
nh_grp->key.fi = fi;
+ fib_info_hold(fi);
for (i = 0; i < nh_grp->count; i++) {
nh = &nh_grp->nexthops[i];
fib_nh = &fi->fib_nh[i];
@@ -1885,6 +1894,7 @@
nh = &nh_grp->nexthops[i];
mlxsw_sp_nexthop_fini(mlxsw_sp, nh);
}
+ fib_info_put(nh_grp->key.fi);
kfree(nh_grp);
return ERR_PTR(err);
}
@@ -1903,6 +1913,7 @@
}
mlxsw_sp_nexthop_group_refresh(mlxsw_sp, nh_grp);
WARN_ON_ONCE(nh_grp->adj_index_valid);
+ fib_info_put(nh_grp->key.fi);
kfree(nh_grp);
}
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
index cd89a3e..656b2d3 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
@@ -979,7 +979,6 @@
{
u16 pvid = mlxsw_sp_port_pvid_determine(mlxsw_sp_port, vid, is_pvid);
struct mlxsw_sp_port_vlan *mlxsw_sp_port_vlan;
- struct mlxsw_sp_bridge_vlan *bridge_vlan;
u16 old_pvid = mlxsw_sp_port->pvid;
int err;
@@ -1000,8 +999,6 @@
if (err)
goto err_port_vlan_bridge_join;
- bridge_vlan = mlxsw_sp_bridge_vlan_find(bridge_port, vid);
-
return 0;
err_port_vlan_bridge_join:
@@ -1919,6 +1916,8 @@
memcpy(&switchdev_work->fdb_info, ptr,
sizeof(switchdev_work->fdb_info));
switchdev_work->fdb_info.addr = kzalloc(ETH_ALEN, GFP_ATOMIC);
+ if (!switchdev_work->fdb_info.addr)
+ goto err_addr_alloc;
ether_addr_copy((u8 *)switchdev_work->fdb_info.addr,
fdb_info->addr);
/* Take a reference on the device. This can be either
@@ -1935,6 +1934,10 @@
mlxsw_core_schedule_work(&switchdev_work->work);
return NOTIFY_DONE;
+
+err_addr_alloc:
+ kfree(switchdev_work);
+ return NOTIFY_BAD;
}
static struct notifier_block mlxsw_sp_switchdev_notifier = {
diff --git a/drivers/net/ethernet/netronome/nfp/flower/metadata.c b/drivers/net/ethernet/netronome/nfp/flower/metadata.c
index fec0ff2..3226ddc 100644
--- a/drivers/net/ethernet/netronome/nfp/flower/metadata.c
+++ b/drivers/net/ethernet/netronome/nfp/flower/metadata.c
@@ -419,7 +419,7 @@
return 0;
err_free_last_used:
- kfree(priv->stats_ids.free_list.buf);
+ kfree(priv->mask_ids.last_used);
err_free_mask_id:
kfree(priv->mask_ids.mask_id_free_list.buf);
return -ENOMEM;
diff --git a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
index b251eba..9d989c9 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
@@ -575,7 +575,7 @@
if (p_tcp_ramrod->tcp.ip_version == TCP_IPV4) {
DP_VERBOSE(p_hwfn, QED_MSG_RDMA,
- "local_ip=%pI4h:%x, remote_ip=%pI4h%x, vlan=%x\n",
+ "local_ip=%pI4h:%x, remote_ip=%pI4h:%x, vlan=%x\n",
p_tcp_ramrod->tcp.local_ip,
p_tcp_ramrod->tcp.local_port,
p_tcp_ramrod->tcp.remote_ip,
@@ -583,7 +583,7 @@
p_tcp_ramrod->tcp.vlan_id);
} else {
DP_VERBOSE(p_hwfn, QED_MSG_RDMA,
- "local_ip=%pI6h:%x, remote_ip=%pI6h:%x, vlan=%x\n",
+ "local_ip=%pI6:%x, remote_ip=%pI6:%x, vlan=%x\n",
p_tcp_ramrod->tcp.local_ip,
p_tcp_ramrod->tcp.local_port,
p_tcp_ramrod->tcp.remote_ip,
@@ -1519,7 +1519,7 @@
cm_info->vlan);
else
DP_VERBOSE(p_hwfn, QED_MSG_RDMA,
- "remote_ip %pI6h:%x, local_ip %pI6h:%x vlan=%x\n",
+ "remote_ip %pI6:%x, local_ip %pI6:%x vlan=%x\n",
cm_info->remote_ip, cm_info->remote_port,
cm_info->local_ip, cm_info->local_port,
cm_info->vlan);
diff --git a/drivers/net/ethernet/qualcomm/emac/emac.c b/drivers/net/ethernet/qualcomm/emac/emac.c
index 746d94e..60850bf 100644
--- a/drivers/net/ethernet/qualcomm/emac/emac.c
+++ b/drivers/net/ethernet/qualcomm/emac/emac.c
@@ -766,11 +766,13 @@
struct emac_adapter *adpt = netdev_priv(netdev);
struct emac_sgmii *sgmii = &adpt->phy;
- /* Closing the SGMII turns off its interrupts */
- sgmii->close(adpt);
+ if (netdev->flags & IFF_UP) {
+ /* Closing the SGMII turns off its interrupts */
+ sgmii->close(adpt);
- /* Resetting the MAC turns off all DMA and its interrupts */
- emac_mac_reset(adpt);
+ /* Resetting the MAC turns off all DMA and its interrupts */
+ emac_mac_reset(adpt);
+ }
}
static struct platform_driver emac_platform_driver = {
diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c
index 761c518..13f72f5 100644
--- a/drivers/net/ethernet/sfc/ef10.c
+++ b/drivers/net/ethernet/sfc/ef10.c
@@ -5034,12 +5034,9 @@
struct efx_ef10_filter_table *table = efx->filter_state;
struct net_device *net_dev = efx->net_dev;
struct netdev_hw_addr *uc;
- int addr_count;
unsigned int i;
- addr_count = netdev_uc_count(net_dev);
table->uc_promisc = !!(net_dev->flags & IFF_PROMISC);
- table->dev_uc_count = 1 + addr_count;
ether_addr_copy(table->dev_uc_list[0].addr, net_dev->dev_addr);
i = 1;
netdev_for_each_uc_addr(uc, net_dev) {
@@ -5050,6 +5047,8 @@
ether_addr_copy(table->dev_uc_list[i].addr, uc->addr);
i++;
}
+
+ table->dev_uc_count = i;
}
static void efx_ef10_filter_mc_addr_list(struct efx_nic *efx)
@@ -5057,12 +5056,11 @@
struct efx_ef10_filter_table *table = efx->filter_state;
struct net_device *net_dev = efx->net_dev;
struct netdev_hw_addr *mc;
- unsigned int i, addr_count;
+ unsigned int i;
table->mc_overflow = false;
table->mc_promisc = !!(net_dev->flags & (IFF_PROMISC | IFF_ALLMULTI));
- addr_count = netdev_mc_count(net_dev);
i = 0;
netdev_for_each_mc_addr(mc, net_dev) {
if (i >= EFX_EF10_FILTER_DEV_MC_MAX) {
diff --git a/drivers/net/ethernet/sgi/ioc3-eth.c b/drivers/net/ethernet/sgi/ioc3-eth.c
index b607936..9c0488e 100644
--- a/drivers/net/ethernet/sgi/ioc3-eth.c
+++ b/drivers/net/ethernet/sgi/ioc3-eth.c
@@ -90,17 +90,13 @@
spinlock_t ioc3_lock;
struct mii_if_info mii;
+ struct net_device *dev;
struct pci_dev *pdev;
/* Members used by autonegotiation */
struct timer_list ioc3_timer;
};
-static inline struct net_device *priv_netdev(struct ioc3_private *dev)
-{
- return (void *)dev - ((sizeof(struct net_device) + 31) & ~31);
-}
-
static int ioc3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
static void ioc3_set_multicast_list(struct net_device *dev);
static int ioc3_start_xmit(struct sk_buff *skb, struct net_device *dev);
@@ -427,7 +423,7 @@
nic[i] = nic_read_byte(ioc3);
for (i = 2; i < 8; i++)
- priv_netdev(ip)->dev_addr[i - 2] = nic[i];
+ ip->dev->dev_addr[i - 2] = nic[i];
}
/*
@@ -439,7 +435,7 @@
{
ioc3_get_eaddr_nic(ip);
- printk("Ethernet address is %pM.\n", priv_netdev(ip)->dev_addr);
+ printk("Ethernet address is %pM.\n", ip->dev->dev_addr);
}
static void __ioc3_set_mac_address(struct net_device *dev)
@@ -790,13 +786,12 @@
*/
static int ioc3_mii_init(struct ioc3_private *ip)
{
- struct net_device *dev = priv_netdev(ip);
int i, found = 0, res = 0;
int ioc3_phy_workaround = 1;
u16 word;
for (i = 0; i < 32; i++) {
- word = ioc3_mdio_read(dev, i, MII_PHYSID1);
+ word = ioc3_mdio_read(ip->dev, i, MII_PHYSID1);
if (word != 0xffff && word != 0x0000) {
found = 1;
@@ -1276,6 +1271,7 @@
SET_NETDEV_DEV(dev, &pdev->dev);
ip = netdev_priv(dev);
+ ip->dev = dev;
dev->irq = pdev->irq;
diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c
index ea1bbc3..0b6a39b 100644
--- a/drivers/net/ethernet/smsc/smsc911x.c
+++ b/drivers/net/ethernet/smsc/smsc911x.c
@@ -2467,6 +2467,10 @@
pdata = netdev_priv(dev);
dev->irq = irq;
pdata->ioaddr = ioremap_nocache(res->start, res_size);
+ if (!pdata->ioaddr) {
+ retval = -ENOMEM;
+ goto out_ioremap_fail;
+ }
pdata->dev = dev;
pdata->msg_enable = ((1 << debug) - 1);
@@ -2572,6 +2576,7 @@
smsc911x_free_resources(pdev);
out_request_resources_fail:
iounmap(pdata->ioaddr);
+out_ioremap_fail:
free_netdev(dev);
out_release_io_1:
release_mem_region(res->start, resource_size(res));
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index 6c2d1da..fffd6d5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -638,7 +638,7 @@
{
struct sunxi_priv_data *gmac = priv->plat->bsp_priv;
struct device_node *node = priv->device->of_node;
- int ret, phy_interface;
+ int ret;
u32 reg, val;
regmap_read(gmac->regmap, SYSCON_EMAC_REG, &val);
@@ -718,11 +718,7 @@
if (gmac->variant->support_rmii)
reg &= ~SYSCON_RMII_EN;
- phy_interface = priv->plat->interface;
- /* if PHY is internal, select the mode (xMII) used by the SoC */
- if (gmac->use_internal_phy)
- phy_interface = gmac->variant->internal_phy;
- switch (phy_interface) {
+ switch (priv->plat->interface) {
case PHY_INTERFACE_MODE_MII:
/* default */
break;
@@ -936,7 +932,7 @@
}
plat_dat->interface = of_get_phy_mode(dev->of_node);
- if (plat_dat->interface == PHY_INTERFACE_MODE_INTERNAL) {
+ if (plat_dat->interface == gmac->variant->internal_phy) {
dev_info(&pdev->dev, "Will use internal PHY\n");
gmac->use_internal_phy = true;
gmac->ephy_clk = of_clk_get(plat_dat->phy_node, 0);
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
index 22cf635..7ecf549 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
@@ -205,7 +205,7 @@
{
int i;
- for (i = 0; i < 23; i++)
+ for (i = 0; i < NUM_DWMAC1000_DMA_REGS; i++)
if ((i < 12) || (i > 17))
reg_space[DMA_BUS_MODE / 4 + i] =
readl(ioaddr + DMA_BUS_MODE + i * 4);
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
index eef2f22..6502b9a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
@@ -70,7 +70,7 @@
{
int i;
- for (i = 0; i < 9; i++)
+ for (i = 0; i < NUM_DWMAC100_DMA_REGS; i++)
reg_space[DMA_BUS_MODE / 4 + i] =
readl(ioaddr + DMA_BUS_MODE + i * 4);
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
index f233bf8..c4407e8 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
@@ -117,7 +117,7 @@
void __iomem *ioaddr = hw->pcsr;
u32 value;
- const struct stmmac_rx_routing route_possibilities[] = {
+ static const struct stmmac_rx_routing route_possibilities[] = {
{ GMAC_RXQCTRL_AVCPQ_MASK, GMAC_RXQCTRL_AVCPQ_SHIFT },
{ GMAC_RXQCTRL_PTPQ_MASK, GMAC_RXQCTRL_PTPQ_SHIFT },
{ GMAC_RXQCTRL_DCBCPQ_MASK, GMAC_RXQCTRL_DCBCPQ_SHIFT },
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
index 9091df8..adc5400 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
@@ -136,6 +136,9 @@
#define DMA_STATUS_TI 0x00000001 /* Transmit Interrupt */
#define DMA_CONTROL_FTF 0x00100000 /* Flush transmit FIFO */
+#define NUM_DWMAC100_DMA_REGS 9
+#define NUM_DWMAC1000_DMA_REGS 23
+
void dwmac_enable_dma_transmission(void __iomem *ioaddr);
void dwmac_enable_dma_irq(void __iomem *ioaddr, u32 chan);
void dwmac_disable_dma_irq(void __iomem *ioaddr, u32 chan);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
index babb39c..af30b48 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
@@ -33,6 +33,8 @@
#define MAC100_ETHTOOL_NAME "st_mac100"
#define GMAC_ETHTOOL_NAME "st_gmac"
+#define ETHTOOL_DMA_OFFSET 55
+
struct stmmac_stats {
char stat_string[ETH_GSTRING_LEN];
int sizeof_stat;
@@ -442,6 +444,9 @@
priv->hw->mac->dump_regs(priv->hw, reg_space);
priv->hw->dma->dump_regs(priv->ioaddr, reg_space);
+ /* Copy DMA registers to where ethtool expects them */
+ memcpy(®_space[ETHTOOL_DMA_OFFSET], ®_space[DMA_BUS_MODE / 4],
+ NUM_DWMAC1000_DMA_REGS * 4);
}
static void
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 19bba62..1763e48 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1449,7 +1449,7 @@
static void free_dma_tx_desc_resources(struct stmmac_priv *priv)
{
u32 tx_count = priv->plat->tx_queues_to_use;
- u32 queue = 0;
+ u32 queue;
/* Free TX queue resources */
for (queue = 0; queue < tx_count; queue++) {
@@ -1498,7 +1498,7 @@
sizeof(dma_addr_t),
GFP_KERNEL);
if (!rx_q->rx_skbuff_dma)
- return -ENOMEM;
+ goto err_dma;
rx_q->rx_skbuff = kmalloc_array(DMA_RX_SIZE,
sizeof(struct sk_buff *),
@@ -1561,13 +1561,13 @@
sizeof(*tx_q->tx_skbuff_dma),
GFP_KERNEL);
if (!tx_q->tx_skbuff_dma)
- return -ENOMEM;
+ goto err_dma;
tx_q->tx_skbuff = kmalloc_array(DMA_TX_SIZE,
sizeof(struct sk_buff *),
GFP_KERNEL);
if (!tx_q->tx_skbuff)
- goto err_dma_buffers;
+ goto err_dma;
if (priv->extend_desc) {
tx_q->dma_etx = dma_zalloc_coherent(priv->device,
@@ -1577,7 +1577,7 @@
&tx_q->dma_tx_phy,
GFP_KERNEL);
if (!tx_q->dma_etx)
- goto err_dma_buffers;
+ goto err_dma;
} else {
tx_q->dma_tx = dma_zalloc_coherent(priv->device,
DMA_TX_SIZE *
@@ -1586,13 +1586,13 @@
&tx_q->dma_tx_phy,
GFP_KERNEL);
if (!tx_q->dma_tx)
- goto err_dma_buffers;
+ goto err_dma;
}
}
return 0;
-err_dma_buffers:
+err_dma:
free_dma_tx_desc_resources(priv);
return ret;
@@ -4120,8 +4120,15 @@
if ((phyaddr >= 0) && (phyaddr <= 31))
priv->plat->phy_addr = phyaddr;
- if (priv->plat->stmmac_rst)
+ if (priv->plat->stmmac_rst) {
+ ret = reset_control_assert(priv->plat->stmmac_rst);
reset_control_deassert(priv->plat->stmmac_rst);
+ /* Some reset controllers have only reset callback instead of
+ * assert + deassert callbacks pair.
+ */
+ if (ret == -ENOTSUPP)
+ reset_control_reset(priv->plat->stmmac_rst);
+ }
/* Init MAC and get the capabilities */
ret = stmmac_hw_init(priv);
diff --git a/drivers/net/ethernet/sun/niu.c b/drivers/net/ethernet/sun/niu.c
index 46cb7f8..4bb04aa 100644
--- a/drivers/net/ethernet/sun/niu.c
+++ b/drivers/net/ethernet/sun/niu.c
@@ -9532,7 +9532,7 @@
p = niu_new_parent(np, id, ptype);
if (p) {
- char port_name[6];
+ char port_name[8];
int err;
sprintf(port_name, "port%d", port);
@@ -9553,7 +9553,7 @@
{
struct niu_parent *p = np->parent;
u8 port = np->port;
- char port_name[6];
+ char port_name[8];
BUG_ON(!p || p->ports[port] != np);
diff --git a/drivers/net/ethernet/sun/sunhme.h b/drivers/net/ethernet/sun/sunhme.h
index 3af540a..fca1bca 100644
--- a/drivers/net/ethernet/sun/sunhme.h
+++ b/drivers/net/ethernet/sun/sunhme.h
@@ -13,9 +13,9 @@
/* Happy Meal global registers. */
#define GREG_SWRESET 0x000UL /* Software Reset */
#define GREG_CFG 0x004UL /* Config Register */
-#define GREG_STAT 0x108UL /* Status */
-#define GREG_IMASK 0x10cUL /* Interrupt Mask */
-#define GREG_REG_SIZE 0x110UL
+#define GREG_STAT 0x100UL /* Status */
+#define GREG_IMASK 0x104UL /* Interrupt Mask */
+#define GREG_REG_SIZE 0x108UL
/* Global reset register. */
#define GREG_RESET_ETX 0x01
diff --git a/drivers/net/ethernet/tehuti/tehuti.c b/drivers/net/ethernet/tehuti/tehuti.c
index 711fbbb..163d8d1 100644
--- a/drivers/net/ethernet/tehuti/tehuti.c
+++ b/drivers/net/ethernet/tehuti/tehuti.c
@@ -654,6 +654,8 @@
RET(-EFAULT);
}
DBG("%d 0x%x 0x%x\n", data[0], data[1], data[2]);
+ } else {
+ return -EOPNOTSUPP;
}
if (!capable(CAP_SYS_RAWIO))
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 1850e34..badd0a8 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -3089,6 +3089,31 @@
cpsw->quirk_irq = true;
}
+ ndev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
+
+ ndev->netdev_ops = &cpsw_netdev_ops;
+ ndev->ethtool_ops = &cpsw_ethtool_ops;
+ netif_napi_add(ndev, &cpsw->napi_rx, cpsw_rx_poll, CPSW_POLL_WEIGHT);
+ netif_tx_napi_add(ndev, &cpsw->napi_tx, cpsw_tx_poll, CPSW_POLL_WEIGHT);
+ cpsw_split_res(ndev);
+
+ /* register the network device */
+ SET_NETDEV_DEV(ndev, &pdev->dev);
+ ret = register_netdev(ndev);
+ if (ret) {
+ dev_err(priv->dev, "error registering net device\n");
+ ret = -ENODEV;
+ goto clean_ale_ret;
+ }
+
+ if (cpsw->data.dual_emac) {
+ ret = cpsw_probe_dual_emac(priv);
+ if (ret) {
+ cpsw_err(priv, probe, "error probe slave 2 emac interface\n");
+ goto clean_unregister_netdev_ret;
+ }
+ }
+
/* Grab RX and TX IRQs. Note that we also have RX_THRESHOLD and
* MISC IRQs which are always kept disabled with this driver so
* we will not request them.
@@ -3127,33 +3152,9 @@
goto clean_ale_ret;
}
- ndev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
-
- ndev->netdev_ops = &cpsw_netdev_ops;
- ndev->ethtool_ops = &cpsw_ethtool_ops;
- netif_napi_add(ndev, &cpsw->napi_rx, cpsw_rx_poll, CPSW_POLL_WEIGHT);
- netif_tx_napi_add(ndev, &cpsw->napi_tx, cpsw_tx_poll, CPSW_POLL_WEIGHT);
- cpsw_split_res(ndev);
-
- /* register the network device */
- SET_NETDEV_DEV(ndev, &pdev->dev);
- ret = register_netdev(ndev);
- if (ret) {
- dev_err(priv->dev, "error registering net device\n");
- ret = -ENODEV;
- goto clean_ale_ret;
- }
-
cpsw_notice(priv, probe,
"initialized device (regs %pa, irq %d, pool size %d)\n",
&ss_res->start, ndev->irq, dma_params.descs_pool_size);
- if (cpsw->data.dual_emac) {
- ret = cpsw_probe_dual_emac(priv);
- if (ret) {
- cpsw_err(priv, probe, "error probe slave 2 emac interface\n");
- goto clean_unregister_netdev_ret;
- }
- }
pm_runtime_put(&pdev->dev);
diff --git a/drivers/net/ethernet/toshiba/tc35815.c b/drivers/net/ethernet/toshiba/tc35815.c
index d9db8a0..cce9c9e 100644
--- a/drivers/net/ethernet/toshiba/tc35815.c
+++ b/drivers/net/ethernet/toshiba/tc35815.c
@@ -1338,7 +1338,7 @@
static void tc35815_fatal_error_interrupt(struct net_device *dev, u32 status)
{
static int count;
- printk(KERN_WARNING "%s: Fatal Error Intterrupt (%#x):",
+ printk(KERN_WARNING "%s: Fatal Error Interrupt (%#x):",
dev->name, status);
if (status & Int_IntPCI)
printk(" IntPCI");
diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
index 63c98bb..0d78727 100644
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -315,14 +315,34 @@
return slots_used;
}
-/* Estimate number of page buffers neede to transmit
- * Need at most 2 for RNDIS header plus skb body and fragments.
- */
-static unsigned int netvsc_get_slots(const struct sk_buff *skb)
+static int count_skb_frag_slots(struct sk_buff *skb)
{
- return PFN_UP(offset_in_page(skb->data) + skb_headlen(skb))
- + skb_shinfo(skb)->nr_frags
- + 2;
+ int i, frags = skb_shinfo(skb)->nr_frags;
+ int pages = 0;
+
+ for (i = 0; i < frags; i++) {
+ skb_frag_t *frag = skb_shinfo(skb)->frags + i;
+ unsigned long size = skb_frag_size(frag);
+ unsigned long offset = frag->page_offset;
+
+ /* Skip unused frames from start of page */
+ offset &= ~PAGE_MASK;
+ pages += PFN_UP(offset + size);
+ }
+ return pages;
+}
+
+static int netvsc_get_slots(struct sk_buff *skb)
+{
+ char *data = skb->data;
+ unsigned int offset = offset_in_page(data);
+ unsigned int len = skb_headlen(skb);
+ int slots;
+ int frag_slots;
+
+ slots = DIV_ROUND_UP(offset + len, PAGE_SIZE);
+ frag_slots = count_skb_frag_slots(skb);
+ return slots + frag_slots;
}
static u32 net_checksum_info(struct sk_buff *skb)
@@ -360,18 +380,21 @@
struct hv_page_buffer page_buf[MAX_PAGE_BUFFER_COUNT];
struct hv_page_buffer *pb = page_buf;
- /* We can only transmit MAX_PAGE_BUFFER_COUNT number
+ /* We will atmost need two pages to describe the rndis
+ * header. We can only transmit MAX_PAGE_BUFFER_COUNT number
* of pages in a single packet. If skb is scattered around
* more pages we try linearizing it.
*/
- num_data_pgs = netvsc_get_slots(skb);
+
+ num_data_pgs = netvsc_get_slots(skb) + 2;
+
if (unlikely(num_data_pgs > MAX_PAGE_BUFFER_COUNT)) {
++net_device_ctx->eth_stats.tx_scattered;
if (skb_linearize(skb))
goto no_memory;
- num_data_pgs = netvsc_get_slots(skb);
+ num_data_pgs = netvsc_get_slots(skb) + 2;
if (num_data_pgs > MAX_PAGE_BUFFER_COUNT) {
++net_device_ctx->eth_stats.tx_too_big;
goto drop;
diff --git a/drivers/net/irda/mcs7780.c b/drivers/net/irda/mcs7780.c
index 6f6ed75..765de3b 100644
--- a/drivers/net/irda/mcs7780.c
+++ b/drivers/net/irda/mcs7780.c
@@ -141,9 +141,19 @@
static int mcs_get_reg(struct mcs_cb *mcs, __u16 reg, __u16 * val)
{
struct usb_device *dev = mcs->usbdev;
- int ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ,
- MCS_RD_RTYPE, 0, reg, val, 2,
- msecs_to_jiffies(MCS_CTRL_TIMEOUT));
+ void *dmabuf;
+ int ret;
+
+ dmabuf = kmalloc(sizeof(__u16), GFP_KERNEL);
+ if (!dmabuf)
+ return -ENOMEM;
+
+ ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ,
+ MCS_RD_RTYPE, 0, reg, dmabuf, 2,
+ msecs_to_jiffies(MCS_CTRL_TIMEOUT));
+
+ memcpy(val, dmabuf, sizeof(__u16));
+ kfree(dmabuf);
return ret;
}
diff --git a/drivers/net/ntb_netdev.c b/drivers/net/ntb_netdev.c
index 4daf3d0..0250aa9 100644
--- a/drivers/net/ntb_netdev.c
+++ b/drivers/net/ntb_netdev.c
@@ -418,6 +418,8 @@
if (!ndev)
return -ENOMEM;
+ SET_NETDEV_DEV(ndev, client_dev);
+
dev = netdev_priv(ndev);
dev->ndev = ndev;
dev->pdev = pdev;
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 2dda720..928fd89 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -7,7 +7,16 @@
help
MDIO devices and driver infrastructure code.
-if MDIO_DEVICE
+config MDIO_BUS
+ tristate
+ default m if PHYLIB=m
+ default MDIO_DEVICE
+ help
+ This internal symbol is used for link time dependencies and it
+ reflects whether the mdio_bus/mdio_device code is built as a
+ loadable module or built-in.
+
+if MDIO_BUS
config MDIO_BCM_IPROC
tristate "Broadcom iProc MDIO bus controller"
@@ -28,7 +37,6 @@
config MDIO_BITBANG
tristate "Bitbanged MDIO buses"
- depends on !(MDIO_DEVICE=y && PHYLIB=m)
help
This module implements the MDIO bus protocol in software,
for use by low level drivers that export the ability to
@@ -127,7 +135,6 @@
tristate "ThunderX SOCs MDIO buses"
depends on 64BIT
depends on PCI
- depends on !(MDIO_DEVICE=y && PHYLIB=m)
select MDIO_CAVIUM
help
This driver supports the MDIO interfaces found on Cavium
diff --git a/drivers/net/phy/mdio-mux.c b/drivers/net/phy/mdio-mux.c
index 00755b6..c608e1d 100644
--- a/drivers/net/phy/mdio-mux.c
+++ b/drivers/net/phy/mdio-mux.c
@@ -135,8 +135,8 @@
for_each_available_child_of_node(dev->of_node, child_bus_node) {
int v;
- v = of_mdio_parse_addr(dev, child_bus_node);
- if (v < 0) {
+ r = of_property_read_u32(child_bus_node, "reg", &v);
+ if (r) {
dev_err(dev,
"Error: Failed to find reg for child %s\n",
of_node_full_name(child_bus_node));
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index d0626bf..5068c58 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -749,6 +749,9 @@
if (phydev->state > PHY_UP && phydev->state != PHY_HALTED)
phydev->state = PHY_UP;
mutex_unlock(&phydev->lock);
+
+ /* Now we can run the state machine synchronously */
+ phy_state_machine(&phydev->state_queue.work);
}
/**
diff --git a/drivers/net/ppp/ppp_generic.c b/drivers/net/ppp/ppp_generic.c
index 1302883..bd43039 100644
--- a/drivers/net/ppp/ppp_generic.c
+++ b/drivers/net/ppp/ppp_generic.c
@@ -120,6 +120,7 @@
int n_channels; /* how many channels are attached 54 */
spinlock_t rlock; /* lock for receive side 58 */
spinlock_t wlock; /* lock for transmit side 5c */
+ int *xmit_recursion __percpu; /* xmit recursion detect */
int mru; /* max receive unit 60 */
unsigned int flags; /* control bits 64 */
unsigned int xstate; /* transmit state bits 68 */
@@ -1025,6 +1026,7 @@
struct ppp *ppp = netdev_priv(dev);
int indx;
int err;
+ int cpu;
ppp->dev = dev;
ppp->ppp_net = src_net;
@@ -1039,6 +1041,15 @@
INIT_LIST_HEAD(&ppp->channels);
spin_lock_init(&ppp->rlock);
spin_lock_init(&ppp->wlock);
+
+ ppp->xmit_recursion = alloc_percpu(int);
+ if (!ppp->xmit_recursion) {
+ err = -ENOMEM;
+ goto err1;
+ }
+ for_each_possible_cpu(cpu)
+ (*per_cpu_ptr(ppp->xmit_recursion, cpu)) = 0;
+
#ifdef CONFIG_PPP_MULTILINK
ppp->minseq = -1;
skb_queue_head_init(&ppp->mrq);
@@ -1050,11 +1061,15 @@
err = ppp_unit_register(ppp, conf->unit, conf->ifname_is_set);
if (err < 0)
- return err;
+ goto err2;
conf->file->private_data = &ppp->file;
return 0;
+err2:
+ free_percpu(ppp->xmit_recursion);
+err1:
+ return err;
}
static const struct nla_policy ppp_nl_policy[IFLA_PPP_MAX + 1] = {
@@ -1400,18 +1415,16 @@
ppp_xmit_unlock(ppp);
}
-static DEFINE_PER_CPU(int, ppp_xmit_recursion);
-
static void ppp_xmit_process(struct ppp *ppp)
{
local_bh_disable();
- if (unlikely(__this_cpu_read(ppp_xmit_recursion)))
+ if (unlikely(*this_cpu_ptr(ppp->xmit_recursion)))
goto err;
- __this_cpu_inc(ppp_xmit_recursion);
+ (*this_cpu_ptr(ppp->xmit_recursion))++;
__ppp_xmit_process(ppp);
- __this_cpu_dec(ppp_xmit_recursion);
+ (*this_cpu_ptr(ppp->xmit_recursion))--;
local_bh_enable();
@@ -1905,7 +1918,7 @@
read_lock(&pch->upl);
ppp = pch->ppp;
if (ppp)
- __ppp_xmit_process(ppp);
+ ppp_xmit_process(ppp);
read_unlock(&pch->upl);
}
}
@@ -1914,9 +1927,7 @@
{
local_bh_disable();
- __this_cpu_inc(ppp_xmit_recursion);
__ppp_channel_push(pch);
- __this_cpu_dec(ppp_xmit_recursion);
local_bh_enable();
}
@@ -3057,6 +3068,7 @@
#endif /* CONFIG_PPP_FILTER */
kfree_skb(ppp->xmit_pending);
+ free_percpu(ppp->xmit_recursion);
free_netdev(ppp->dev);
}
diff --git a/drivers/net/ppp/pptp.c b/drivers/net/ppp/pptp.c
index eac499c..6dde9a0 100644
--- a/drivers/net/ppp/pptp.c
+++ b/drivers/net/ppp/pptp.c
@@ -131,7 +131,6 @@
clear_bit(sock->proto.pptp.src_addr.call_id, callid_bitmap);
RCU_INIT_POINTER(callid_sock[sock->proto.pptp.src_addr.call_id], NULL);
spin_unlock(&chan_lock);
- synchronize_rcu();
}
static int pptp_xmit(struct ppp_channel *chan, struct sk_buff *skb)
@@ -520,6 +519,7 @@
po = pppox_sk(sk);
del_chan(po);
+ synchronize_rcu();
pppox_unbind_sock(sk);
sk->sk_state = PPPOX_DEAD;
diff --git a/drivers/net/tap.c b/drivers/net/tap.c
index 9af3239..3570c75 100644
--- a/drivers/net/tap.c
+++ b/drivers/net/tap.c
@@ -106,7 +106,7 @@
struct rcu_head rcu;
dev_t major;
struct idr minor_idr;
- struct mutex minor_lock;
+ spinlock_t minor_lock;
const char *device_name;
struct list_head next;
};
@@ -416,15 +416,15 @@
goto unlock;
}
- mutex_lock(&tap_major->minor_lock);
- retval = idr_alloc(&tap_major->minor_idr, tap, 1, TAP_NUM_DEVS, GFP_KERNEL);
+ spin_lock(&tap_major->minor_lock);
+ retval = idr_alloc(&tap_major->minor_idr, tap, 1, TAP_NUM_DEVS, GFP_ATOMIC);
if (retval >= 0) {
tap->minor = retval;
} else if (retval == -ENOSPC) {
netdev_err(tap->dev, "Too many tap devices\n");
retval = -EINVAL;
}
- mutex_unlock(&tap_major->minor_lock);
+ spin_unlock(&tap_major->minor_lock);
unlock:
rcu_read_unlock();
@@ -442,12 +442,12 @@
goto unlock;
}
- mutex_lock(&tap_major->minor_lock);
+ spin_lock(&tap_major->minor_lock);
if (tap->minor) {
idr_remove(&tap_major->minor_idr, tap->minor);
tap->minor = 0;
}
- mutex_unlock(&tap_major->minor_lock);
+ spin_unlock(&tap_major->minor_lock);
unlock:
rcu_read_unlock();
@@ -467,13 +467,13 @@
goto unlock;
}
- mutex_lock(&tap_major->minor_lock);
+ spin_lock(&tap_major->minor_lock);
tap = idr_find(&tap_major->minor_idr, minor);
if (tap) {
dev = tap->dev;
dev_hold(dev);
}
- mutex_unlock(&tap_major->minor_lock);
+ spin_unlock(&tap_major->minor_lock);
unlock:
rcu_read_unlock();
@@ -1244,7 +1244,7 @@
tap_major->major = MAJOR(major);
idr_init(&tap_major->minor_idr);
- mutex_init(&tap_major->minor_lock);
+ spin_lock_init(&tap_major->minor_lock);
tap_major->device_name = device_name;
diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c
index 4645704..ae53e89 100644
--- a/drivers/net/team/team.c
+++ b/drivers/net/team/team.c
@@ -60,11 +60,11 @@
static int __set_port_dev_addr(struct net_device *port_dev,
const unsigned char *dev_addr)
{
- struct sockaddr addr;
+ struct sockaddr_storage addr;
- memcpy(addr.sa_data, dev_addr, port_dev->addr_len);
- addr.sa_family = port_dev->type;
- return dev_set_mac_address(port_dev, &addr);
+ memcpy(addr.__data, dev_addr, port_dev->addr_len);
+ addr.ss_family = port_dev->type;
+ return dev_set_mac_address(port_dev, (struct sockaddr *)&addr);
}
static int team_port_set_orig_dev_addr(struct team_port *port)
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 3d4c245..32ad873 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -2598,8 +2598,16 @@
goto err_misc;
}
- register_netdevice_notifier(&tun_notifier_block);
+ ret = register_netdevice_notifier(&tun_notifier_block);
+ if (ret) {
+ pr_err("Can't register netdevice notifier\n");
+ goto err_notifier;
+ }
+
return 0;
+
+err_notifier:
+ misc_deregister(&tun_miscdev);
err_misc:
rtnl_link_unregister(&tun_link_ops);
err_linkops:
diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c
index d103a1d..8f572b9 100644
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -768,8 +768,10 @@
u8 *buf;
int len;
int temp;
+ int err;
u8 iface_no;
struct usb_cdc_parsed_header hdr;
+ u16 curr_ntb_format;
ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
if (!ctx)
@@ -874,6 +876,32 @@
goto error2;
}
+ /*
+ * Some Huawei devices have been observed to come out of reset in NDP32 mode.
+ * Let's check if this is the case, and set the device to NDP16 mode again if
+ * needed.
+ */
+ if (ctx->drvflags & CDC_NCM_FLAG_RESET_NTB16) {
+ err = usbnet_read_cmd(dev, USB_CDC_GET_NTB_FORMAT,
+ USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE,
+ 0, iface_no, &curr_ntb_format, 2);
+ if (err < 0) {
+ goto error2;
+ }
+
+ if (curr_ntb_format == USB_CDC_NCM_NTB32_FORMAT) {
+ dev_info(&intf->dev, "resetting NTB format to 16-bit");
+ err = usbnet_write_cmd(dev, USB_CDC_SET_NTB_FORMAT,
+ USB_TYPE_CLASS | USB_DIR_OUT
+ | USB_RECIP_INTERFACE,
+ USB_CDC_NCM_NTB16_FORMAT,
+ iface_no, NULL, 0);
+
+ if (err < 0)
+ goto error2;
+ }
+ }
+
cdc_ncm_find_endpoints(dev, ctx->data);
cdc_ncm_find_endpoints(dev, ctx->control);
if (!dev->in || !dev->out || !dev->status) {
diff --git a/drivers/net/usb/huawei_cdc_ncm.c b/drivers/net/usb/huawei_cdc_ncm.c
index 2680a65..63f28908 100644
--- a/drivers/net/usb/huawei_cdc_ncm.c
+++ b/drivers/net/usb/huawei_cdc_ncm.c
@@ -80,6 +80,12 @@
* be at the end of the frame.
*/
drvflags |= CDC_NCM_FLAG_NDP_TO_END;
+
+ /* Additionally, it has been reported that some Huawei E3372H devices, with
+ * firmware version 21.318.01.00.541, come out of reset in NTB32 format mode, hence
+ * needing to be set to the NTB16 one again.
+ */
+ drvflags |= CDC_NCM_FLAG_RESET_NTB16;
ret = cdc_ncm_bind_common(usbnet_dev, intf, 1, drvflags);
if (ret)
goto err;
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index 2dfca96..340c134 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -898,6 +898,7 @@
.set_wol = smsc95xx_ethtool_set_wol,
.get_link_ksettings = smsc95xx_get_link_ksettings,
.set_link_ksettings = smsc95xx_set_link_ksettings,
+ .get_ts_info = ethtool_op_get_ts_info,
};
static int smsc95xx_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 99a26a9..98f17b0 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -889,21 +889,20 @@
buf = (char *)page_address(alloc_frag->page) + alloc_frag->offset;
buf += headroom; /* advance address leaving hole at front of pkt */
- ctx = (void *)(unsigned long)len;
get_page(alloc_frag->page);
alloc_frag->offset += len + headroom;
hole = alloc_frag->size - alloc_frag->offset;
if (hole < len + headroom) {
/* To avoid internal fragmentation, if there is very likely not
* enough space for another buffer, add the remaining space to
- * the current buffer. This extra space is not included in
- * the truesize stored in ctx.
+ * the current buffer.
*/
len += hole;
alloc_frag->offset += hole;
}
sg_init_one(rq->sg, buf, len);
+ ctx = (void *)(unsigned long)len;
err = virtqueue_add_inbuf_ctx(rq->vq, rq->sg, 1, buf, ctx, gfp);
if (err < 0)
put_page(virt_to_head_page(buf));
@@ -2743,9 +2742,9 @@
static __exit void virtio_net_driver_exit(void)
{
+ unregister_virtio_driver(&virtio_net_driver);
cpuhp_remove_multi_state(CPUHP_VIRT_NET_DEAD);
cpuhp_remove_multi_state(virtionet_online);
- unregister_virtio_driver(&virtio_net_driver);
}
module_exit(virtio_net_driver_exit);
diff --git a/drivers/net/vmxnet3/vmxnet3_int.h b/drivers/net/vmxnet3/vmxnet3_int.h
index ba1c9f9..9c51b8b 100644
--- a/drivers/net/vmxnet3/vmxnet3_int.h
+++ b/drivers/net/vmxnet3/vmxnet3_int.h
@@ -311,7 +311,7 @@
u8 num_intrs; /* # of intr vectors */
u8 event_intr_idx; /* idx of the intr vector for event */
u8 mod_levels[VMXNET3_LINUX_MAX_MSIX_VECT]; /* moderation level */
- char event_msi_vector_name[IFNAMSIZ+11];
+ char event_msi_vector_name[IFNAMSIZ+17];
#ifdef CONFIG_PCI_MSI
struct msix_entry msix_entries[VMXNET3_LINUX_MAX_MSIX_VECT];
#endif
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index dcde596..7e689c8 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -4934,6 +4934,11 @@
cfg80211_mgmt_tx_status(wdev, *cookie, buf, len, true,
GFP_KERNEL);
} else if (ieee80211_is_action(mgmt->frame_control)) {
+ if (len > BRCMF_FIL_ACTION_FRAME_SIZE + DOT11_MGMT_HDR_LEN) {
+ brcmf_err("invalid action frame length\n");
+ err = -EINVAL;
+ goto exit;
+ }
af_params = kzalloc(sizeof(*af_params), GFP_KERNEL);
if (af_params == NULL) {
brcmf_err("unable to allocate frame\n");
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
index 2153e80..5cc3a07 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
@@ -214,7 +214,7 @@
/* Make sure there's enough writeable headroom */
if (skb_headroom(skb) < drvr->hdrlen || skb_header_cloned(skb)) {
- head_delta = drvr->hdrlen - skb_headroom(skb);
+ head_delta = max_t(int, drvr->hdrlen - skb_headroom(skb), 0);
brcmf_dbg(INFO, "%s: insufficient headroom (%d)\n",
brcmf_ifname(ifp), head_delta);
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index fbcbb43..f355612 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -2053,12 +2053,13 @@
atomic_inc(&stats->pktcow_failed);
return -ENOMEM;
}
+ head_pad = 0;
}
skb_push(pkt, head_pad);
dat_buf = (u8 *)(pkt->data);
}
memset(dat_buf, 0, head_pad + bus->tx_hdrlen);
- return 0;
+ return head_pad;
}
/**
@@ -4174,11 +4175,6 @@
goto fail;
}
- /* allocate scatter-gather table. sg support
- * will be disabled upon allocation failure.
- */
- brcmf_sdiod_sgtable_alloc(bus->sdiodev);
-
/* Query the F2 block size, set roundup accordingly */
bus->blocksize = bus->sdiodev->func[2]->cur_blksize;
bus->roundup = min(max_roundup, bus->blocksize);
diff --git a/drivers/net/wireless/intel/iwlwifi/dvm/tx.c b/drivers/net/wireless/intel/iwlwifi/dvm/tx.c
index adaa2f0..fb40ddf 100644
--- a/drivers/net/wireless/intel/iwlwifi/dvm/tx.c
+++ b/drivers/net/wireless/intel/iwlwifi/dvm/tx.c
@@ -1189,11 +1189,11 @@
next_reclaimed;
IWL_DEBUG_TX_REPLY(priv, "Next reclaimed packet:%d\n",
next_reclaimed);
+ iwlagn_check_ratid_empty(priv, sta_id, tid);
}
iwl_trans_reclaim(priv->trans, txq_id, ssn, &skbs);
- iwlagn_check_ratid_empty(priv, sta_id, tid);
freed = 0;
/* process frames */
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-devtrace.h b/drivers/net/wireless/intel/iwlwifi/iwl-devtrace.h
index 545d14b..f5c1127 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-devtrace.h
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-devtrace.h
@@ -55,8 +55,8 @@
/* also account for the RFC 1042 header, of course */
offs += 6;
- return skb->len > offs + 2 &&
- *(__be16 *)(skb->data + offs) == cpu_to_be16(ETH_P_PAE);
+ return skb->len <= offs + 2 ||
+ *(__be16 *)(skb->data + offs) != cpu_to_be16(ETH_P_PAE);
}
static inline size_t iwl_rx_trace_len(const struct iwl_trans *trans,
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
index bcde1ba..c7b1e58 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
@@ -1084,7 +1084,13 @@
lockdep_assert_held(&mvm->mutex);
- if (test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status)) {
+ if (test_bit(IWL_MVM_STATUS_HW_RESTART_REQUESTED, &mvm->status)) {
+ /*
+ * Now convert the HW_RESTART_REQUESTED flag to IN_HW_RESTART
+ * so later code will - from now on - see that we're doing it.
+ */
+ set_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status);
+ clear_bit(IWL_MVM_STATUS_HW_RESTART_REQUESTED, &mvm->status);
/* Clean up some internal and mac80211 state on restart */
iwl_mvm_restart_cleanup(mvm);
} else {
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h
index eaacfaf..ddd8719 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h
@@ -1090,6 +1090,7 @@
* @IWL_MVM_STATUS_HW_RFKILL: HW RF-kill is asserted
* @IWL_MVM_STATUS_HW_CTKILL: CT-kill is active
* @IWL_MVM_STATUS_ROC_RUNNING: remain-on-channel is running
+ * @IWL_MVM_STATUS_HW_RESTART_REQUESTED: HW restart was requested
* @IWL_MVM_STATUS_IN_HW_RESTART: HW restart is active
* @IWL_MVM_STATUS_IN_D0I3: NIC is in D0i3
* @IWL_MVM_STATUS_ROC_AUX_RUNNING: AUX remain-on-channel is running
@@ -1101,6 +1102,7 @@
IWL_MVM_STATUS_HW_RFKILL,
IWL_MVM_STATUS_HW_CTKILL,
IWL_MVM_STATUS_ROC_RUNNING,
+ IWL_MVM_STATUS_HW_RESTART_REQUESTED,
IWL_MVM_STATUS_IN_HW_RESTART,
IWL_MVM_STATUS_IN_D0I3,
IWL_MVM_STATUS_ROC_AUX_RUNNING,
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c
index 4d1188b..9c175d5 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c
@@ -1235,9 +1235,8 @@
*/
if (!mvm->fw_restart && fw_error) {
iwl_mvm_fw_dbg_collect_desc(mvm, &iwl_mvm_dump_desc_assert,
- NULL);
- } else if (test_and_set_bit(IWL_MVM_STATUS_IN_HW_RESTART,
- &mvm->status)) {
+ NULL);
+ } else if (test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status)) {
struct iwl_mvm_reprobe *reprobe;
IWL_ERR(mvm,
@@ -1268,6 +1267,7 @@
if (fw_error && mvm->fw_restart > 0)
mvm->fw_restart--;
+ set_bit(IWL_MVM_STATUS_HW_RESTART_REQUESTED, &mvm->status);
ieee80211_restart_hw(mvm->hw);
}
}
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c
index 4df5f13..ab66b43 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c
@@ -277,6 +277,18 @@
/* Timer expired */
sta = rcu_dereference(ba_data->mvm->fw_id_to_mac_id[ba_data->sta_id]);
+
+ /*
+ * sta should be valid unless the following happens:
+ * The firmware asserts which triggers a reconfig flow, but
+ * the reconfig fails before we set the pointer to sta into
+ * the fw_id_to_mac_id pointer table. Mac80211 can't stop
+ * A-MDPU and hence the timer continues to run. Then, the
+ * timer expires and sta is NULL.
+ */
+ if (!sta)
+ goto unlock;
+
mvm_sta = iwl_mvm_sta_from_mac80211(sta);
ieee80211_stop_rx_ba_session_offl(mvm_sta->vif,
sta->addr, ba_data->tid);
@@ -2015,7 +2027,8 @@
IWL_MAX_TID_COUNT,
wdg_timeout);
- if (vif->type == NL80211_IFTYPE_AP)
+ if (vif->type == NL80211_IFTYPE_AP ||
+ vif->type == NL80211_IFTYPE_ADHOC)
mvm->probe_queue = queue;
else if (vif->type == NL80211_IFTYPE_P2P_DEVICE)
mvm->p2p_dev_queue = queue;
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
index 92b3a55..f95eec5 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
@@ -3150,7 +3150,8 @@
init_waitqueue_head(&trans_pcie->d0i3_waitq);
if (trans_pcie->msix_enabled) {
- if (iwl_pcie_init_msix_handler(pdev, trans_pcie))
+ ret = iwl_pcie_init_msix_handler(pdev, trans_pcie);
+ if (ret)
goto out_no_pci;
} else {
ret = iwl_pcie_alloc_ict(trans);
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/tx.c b/drivers/net/wireless/intel/iwlwifi/pcie/tx.c
index de50418..034bdb4 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/tx.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/tx.c
@@ -298,6 +298,9 @@
for (i = 0; i < trans->cfg->base_params->num_of_queues; i++) {
struct iwl_txq *txq = trans_pcie->txq[i];
+ if (!test_bit(i, trans_pcie->queue_used))
+ continue;
+
spin_lock_bh(&txq->lock);
if (txq->need_update) {
iwl_pcie_txq_inc_wr_ptr(trans, txq);
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
index 6e2e760..0b75def 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -5704,7 +5704,7 @@
static void rt2800_init_bbp_5592_glrt(struct rt2x00_dev *rt2x00dev)
{
- const u8 glrt_table[] = {
+ static const u8 glrt_table[] = {
0xE0, 0x1F, 0X38, 0x32, 0x08, 0x28, 0x19, 0x0A, 0xFF, 0x00, /* 128 ~ 137 */
0x16, 0x10, 0x10, 0x0B, 0x36, 0x2C, 0x26, 0x24, 0x42, 0x36, /* 138 ~ 147 */
0x30, 0x2D, 0x4C, 0x46, 0x3D, 0x40, 0x3E, 0x42, 0x3D, 0x40, /* 148 ~ 157 */
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c
index 2a7ad5f..cd5dc6d 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c
@@ -846,9 +846,6 @@
return false;
}
- if (rtlpriv->cfg->ops->get_btc_status())
- rtlpriv->btcoexist.btc_ops->btc_power_on_setting(rtlpriv);
-
bytetmp = rtl_read_byte(rtlpriv, REG_MULTI_FUNC_CTRL);
rtl_write_byte(rtlpriv, REG_MULTI_FUNC_CTRL, bytetmp | BIT(3));
diff --git a/drivers/net/wireless/realtek/rtlwifi/wifi.h b/drivers/net/wireless/realtek/rtlwifi/wifi.h
index fb1ebb0..70723e6 100644
--- a/drivers/net/wireless/realtek/rtlwifi/wifi.h
+++ b/drivers/net/wireless/realtek/rtlwifi/wifi.h
@@ -2547,7 +2547,6 @@
struct rtl_btc_ops {
void (*btc_init_variables) (struct rtl_priv *rtlpriv);
void (*btc_init_hal_vars) (struct rtl_priv *rtlpriv);
- void (*btc_power_on_setting)(struct rtl_priv *rtlpriv);
void (*btc_init_hw_config) (struct rtl_priv *rtlpriv);
void (*btc_ips_notify) (struct rtl_priv *rtlpriv, u8 type);
void (*btc_lps_notify)(struct rtl_priv *rtlpriv, u8 type);
diff --git a/drivers/ntb/hw/Kconfig b/drivers/ntb/hw/Kconfig
index 7116472..a89243c 100644
--- a/drivers/ntb/hw/Kconfig
+++ b/drivers/ntb/hw/Kconfig
@@ -1,2 +1,3 @@
source "drivers/ntb/hw/amd/Kconfig"
+source "drivers/ntb/hw/idt/Kconfig"
source "drivers/ntb/hw/intel/Kconfig"
diff --git a/drivers/ntb/hw/Makefile b/drivers/ntb/hw/Makefile
index 532e085..87332c3 100644
--- a/drivers/ntb/hw/Makefile
+++ b/drivers/ntb/hw/Makefile
@@ -1,2 +1,3 @@
obj-$(CONFIG_NTB_AMD) += amd/
+obj-$(CONFIG_NTB_IDT) += idt/
obj-$(CONFIG_NTB_INTEL) += intel/
diff --git a/drivers/ntb/hw/amd/ntb_hw_amd.c b/drivers/ntb/hw/amd/ntb_hw_amd.c
index 019a158..f0788aa 100644
--- a/drivers/ntb/hw/amd/ntb_hw_amd.c
+++ b/drivers/ntb/hw/amd/ntb_hw_amd.c
@@ -5,6 +5,7 @@
* GPL LICENSE SUMMARY
*
* Copyright (C) 2016 Advanced Micro Devices, Inc. All Rights Reserved.
+ * Copyright (C) 2016 T-Platforms. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@@ -13,6 +14,7 @@
* BSD LICENSE
*
* Copyright (C) 2016 Advanced Micro Devices, Inc. All Rights Reserved.
+ * Copyright (C) 2016 T-Platforms. All Rights Reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
@@ -79,40 +81,42 @@
return 1 << idx;
}
-static int amd_ntb_mw_count(struct ntb_dev *ntb)
+static int amd_ntb_mw_count(struct ntb_dev *ntb, int pidx)
{
+ if (pidx != NTB_DEF_PEER_IDX)
+ return -EINVAL;
+
return ntb_ndev(ntb)->mw_count;
}
-static int amd_ntb_mw_get_range(struct ntb_dev *ntb, int idx,
- phys_addr_t *base,
- resource_size_t *size,
- resource_size_t *align,
- resource_size_t *align_size)
+static int amd_ntb_mw_get_align(struct ntb_dev *ntb, int pidx, int idx,
+ resource_size_t *addr_align,
+ resource_size_t *size_align,
+ resource_size_t *size_max)
{
struct amd_ntb_dev *ndev = ntb_ndev(ntb);
int bar;
+ if (pidx != NTB_DEF_PEER_IDX)
+ return -EINVAL;
+
bar = ndev_mw_to_bar(ndev, idx);
if (bar < 0)
return bar;
- if (base)
- *base = pci_resource_start(ndev->ntb.pdev, bar);
+ if (addr_align)
+ *addr_align = SZ_4K;
- if (size)
- *size = pci_resource_len(ndev->ntb.pdev, bar);
+ if (size_align)
+ *size_align = 1;
- if (align)
- *align = SZ_4K;
-
- if (align_size)
- *align_size = 1;
+ if (size_max)
+ *size_max = pci_resource_len(ndev->ntb.pdev, bar);
return 0;
}
-static int amd_ntb_mw_set_trans(struct ntb_dev *ntb, int idx,
+static int amd_ntb_mw_set_trans(struct ntb_dev *ntb, int pidx, int idx,
dma_addr_t addr, resource_size_t size)
{
struct amd_ntb_dev *ndev = ntb_ndev(ntb);
@@ -122,11 +126,14 @@
u64 base_addr, limit, reg_val;
int bar;
+ if (pidx != NTB_DEF_PEER_IDX)
+ return -EINVAL;
+
bar = ndev_mw_to_bar(ndev, idx);
if (bar < 0)
return bar;
- mw_size = pci_resource_len(ndev->ntb.pdev, bar);
+ mw_size = pci_resource_len(ntb->pdev, bar);
/* make sure the range fits in the usable mw size */
if (size > mw_size)
@@ -135,7 +142,7 @@
mmio = ndev->self_mmio;
peer_mmio = ndev->peer_mmio;
- base_addr = pci_resource_start(ndev->ntb.pdev, bar);
+ base_addr = pci_resource_start(ntb->pdev, bar);
if (bar != 1) {
xlat_reg = AMD_BAR23XLAT_OFFSET + ((bar - 2) << 2);
@@ -212,7 +219,7 @@
return 0;
}
-static int amd_ntb_link_is_up(struct ntb_dev *ntb,
+static u64 amd_ntb_link_is_up(struct ntb_dev *ntb,
enum ntb_speed *speed,
enum ntb_width *width)
{
@@ -225,7 +232,7 @@
if (width)
*width = NTB_LNK_STA_WIDTH(ndev->lnk_sta);
- dev_dbg(ndev_dev(ndev), "link is up.\n");
+ dev_dbg(&ntb->pdev->dev, "link is up.\n");
ret = 1;
} else {
@@ -234,7 +241,7 @@
if (width)
*width = NTB_WIDTH_NONE;
- dev_dbg(ndev_dev(ndev), "link is down.\n");
+ dev_dbg(&ntb->pdev->dev, "link is down.\n");
}
return ret;
@@ -254,7 +261,7 @@
if (ndev->ntb.topo == NTB_TOPO_SEC)
return -EINVAL;
- dev_dbg(ndev_dev(ndev), "Enabling Link.\n");
+ dev_dbg(&ntb->pdev->dev, "Enabling Link.\n");
ntb_ctl = readl(mmio + AMD_CNTL_OFFSET);
ntb_ctl |= (PMM_REG_CTL | SMM_REG_CTL);
@@ -275,7 +282,7 @@
if (ndev->ntb.topo == NTB_TOPO_SEC)
return -EINVAL;
- dev_dbg(ndev_dev(ndev), "Enabling Link.\n");
+ dev_dbg(&ntb->pdev->dev, "Enabling Link.\n");
ntb_ctl = readl(mmio + AMD_CNTL_OFFSET);
ntb_ctl &= ~(PMM_REG_CTL | SMM_REG_CTL);
@@ -284,6 +291,31 @@
return 0;
}
+static int amd_ntb_peer_mw_count(struct ntb_dev *ntb)
+{
+ /* The same as for inbound MWs */
+ return ntb_ndev(ntb)->mw_count;
+}
+
+static int amd_ntb_peer_mw_get_addr(struct ntb_dev *ntb, int idx,
+ phys_addr_t *base, resource_size_t *size)
+{
+ struct amd_ntb_dev *ndev = ntb_ndev(ntb);
+ int bar;
+
+ bar = ndev_mw_to_bar(ndev, idx);
+ if (bar < 0)
+ return bar;
+
+ if (base)
+ *base = pci_resource_start(ndev->ntb.pdev, bar);
+
+ if (size)
+ *size = pci_resource_len(ndev->ntb.pdev, bar);
+
+ return 0;
+}
+
static u64 amd_ntb_db_valid_mask(struct ntb_dev *ntb)
{
return ntb_ndev(ntb)->db_valid_mask;
@@ -400,30 +432,30 @@
return 0;
}
-static u32 amd_ntb_peer_spad_read(struct ntb_dev *ntb, int idx)
+static u32 amd_ntb_peer_spad_read(struct ntb_dev *ntb, int pidx, int sidx)
{
struct amd_ntb_dev *ndev = ntb_ndev(ntb);
void __iomem *mmio = ndev->self_mmio;
u32 offset;
- if (idx < 0 || idx >= ndev->spad_count)
+ if (sidx < 0 || sidx >= ndev->spad_count)
return -EINVAL;
- offset = ndev->peer_spad + (idx << 2);
+ offset = ndev->peer_spad + (sidx << 2);
return readl(mmio + AMD_SPAD_OFFSET + offset);
}
-static int amd_ntb_peer_spad_write(struct ntb_dev *ntb,
- int idx, u32 val)
+static int amd_ntb_peer_spad_write(struct ntb_dev *ntb, int pidx,
+ int sidx, u32 val)
{
struct amd_ntb_dev *ndev = ntb_ndev(ntb);
void __iomem *mmio = ndev->self_mmio;
u32 offset;
- if (idx < 0 || idx >= ndev->spad_count)
+ if (sidx < 0 || sidx >= ndev->spad_count)
return -EINVAL;
- offset = ndev->peer_spad + (idx << 2);
+ offset = ndev->peer_spad + (sidx << 2);
writel(val, mmio + AMD_SPAD_OFFSET + offset);
return 0;
@@ -431,8 +463,10 @@
static const struct ntb_dev_ops amd_ntb_ops = {
.mw_count = amd_ntb_mw_count,
- .mw_get_range = amd_ntb_mw_get_range,
+ .mw_get_align = amd_ntb_mw_get_align,
.mw_set_trans = amd_ntb_mw_set_trans,
+ .peer_mw_count = amd_ntb_peer_mw_count,
+ .peer_mw_get_addr = amd_ntb_peer_mw_get_addr,
.link_is_up = amd_ntb_link_is_up,
.link_enable = amd_ntb_link_enable,
.link_disable = amd_ntb_link_disable,
@@ -466,18 +500,19 @@
static void amd_handle_event(struct amd_ntb_dev *ndev, int vec)
{
void __iomem *mmio = ndev->self_mmio;
+ struct device *dev = &ndev->ntb.pdev->dev;
u32 status;
status = readl(mmio + AMD_INTSTAT_OFFSET);
if (!(status & AMD_EVENT_INTMASK))
return;
- dev_dbg(ndev_dev(ndev), "status = 0x%x and vec = %d\n", status, vec);
+ dev_dbg(dev, "status = 0x%x and vec = %d\n", status, vec);
status &= AMD_EVENT_INTMASK;
switch (status) {
case AMD_PEER_FLUSH_EVENT:
- dev_info(ndev_dev(ndev), "Flush is done.\n");
+ dev_info(dev, "Flush is done.\n");
break;
case AMD_PEER_RESET_EVENT:
amd_ack_smu(ndev, AMD_PEER_RESET_EVENT);
@@ -503,7 +538,7 @@
status = readl(mmio + AMD_PMESTAT_OFFSET);
/* check if this is WAKEUP event */
if (status & 0x1)
- dev_info(ndev_dev(ndev), "Wakeup is done.\n");
+ dev_info(dev, "Wakeup is done.\n");
amd_ack_smu(ndev, AMD_PEER_D0_EVENT);
@@ -512,14 +547,14 @@
AMD_LINK_HB_TIMEOUT);
break;
default:
- dev_info(ndev_dev(ndev), "event status = 0x%x.\n", status);
+ dev_info(dev, "event status = 0x%x.\n", status);
break;
}
}
static irqreturn_t ndev_interrupt(struct amd_ntb_dev *ndev, int vec)
{
- dev_dbg(ndev_dev(ndev), "vec %d\n", vec);
+ dev_dbg(&ndev->ntb.pdev->dev, "vec %d\n", vec);
if (vec > (AMD_DB_CNT - 1) || (ndev->msix_vec_count == 1))
amd_handle_event(ndev, vec);
@@ -541,7 +576,7 @@
{
struct amd_ntb_dev *ndev = dev;
- return ndev_interrupt(ndev, irq - ndev_pdev(ndev)->irq);
+ return ndev_interrupt(ndev, irq - ndev->ntb.pdev->irq);
}
static int ndev_init_isr(struct amd_ntb_dev *ndev,
@@ -550,7 +585,7 @@
struct pci_dev *pdev;
int rc, i, msix_count, node;
- pdev = ndev_pdev(ndev);
+ pdev = ndev->ntb.pdev;
node = dev_to_node(&pdev->dev);
@@ -592,7 +627,7 @@
goto err_msix_request;
}
- dev_dbg(ndev_dev(ndev), "Using msix interrupts\n");
+ dev_dbg(&pdev->dev, "Using msix interrupts\n");
ndev->db_count = msix_min;
ndev->msix_vec_count = msix_max;
return 0;
@@ -619,7 +654,7 @@
if (rc)
goto err_msi_request;
- dev_dbg(ndev_dev(ndev), "Using msi interrupts\n");
+ dev_dbg(&pdev->dev, "Using msi interrupts\n");
ndev->db_count = 1;
ndev->msix_vec_count = 1;
return 0;
@@ -636,7 +671,7 @@
if (rc)
goto err_intx_request;
- dev_dbg(ndev_dev(ndev), "Using intx interrupts\n");
+ dev_dbg(&pdev->dev, "Using intx interrupts\n");
ndev->db_count = 1;
ndev->msix_vec_count = 1;
return 0;
@@ -651,7 +686,7 @@
void __iomem *mmio = ndev->self_mmio;
int i;
- pdev = ndev_pdev(ndev);
+ pdev = ndev->ntb.pdev;
/* Mask all doorbell interrupts */
ndev->db_mask = ndev->db_valid_mask;
@@ -777,7 +812,8 @@
ndev->debugfs_info = NULL;
} else {
ndev->debugfs_dir =
- debugfs_create_dir(ndev_name(ndev), debugfs_dir);
+ debugfs_create_dir(pci_name(ndev->ntb.pdev),
+ debugfs_dir);
if (!ndev->debugfs_dir)
ndev->debugfs_info = NULL;
else
@@ -812,7 +848,7 @@
reg = readl(mmio + AMD_SIDEINFO_OFFSET);
reg &= NTB_LIN_STA_ACTIVE_BIT;
- dev_dbg(ndev_dev(ndev), "%s: reg_val = 0x%x.\n", __func__, reg);
+ dev_dbg(&ndev->ntb.pdev->dev, "%s: reg_val = 0x%x.\n", __func__, reg);
if (reg == ndev->cntl_sta)
return 0;
@@ -894,7 +930,8 @@
break;
default:
- dev_err(ndev_dev(ndev), "AMD NTB does not support B2B mode.\n");
+ dev_err(&ndev->ntb.pdev->dev,
+ "AMD NTB does not support B2B mode.\n");
return -EINVAL;
}
@@ -923,10 +960,10 @@
struct pci_dev *pdev;
int rc = 0;
- pdev = ndev_pdev(ndev);
+ pdev = ndev->ntb.pdev;
ndev->ntb.topo = amd_get_topo(ndev);
- dev_dbg(ndev_dev(ndev), "AMD NTB topo is %s\n",
+ dev_dbg(&pdev->dev, "AMD NTB topo is %s\n",
ntb_topo_string(ndev->ntb.topo));
rc = amd_init_ntb(ndev);
@@ -935,7 +972,7 @@
rc = amd_init_isr(ndev);
if (rc) {
- dev_err(ndev_dev(ndev), "fail to init isr.\n");
+ dev_err(&pdev->dev, "fail to init isr.\n");
return rc;
}
@@ -973,7 +1010,7 @@
rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc)
goto err_dma_mask;
- dev_warn(ndev_dev(ndev), "Cannot DMA highmem\n");
+ dev_warn(&pdev->dev, "Cannot DMA highmem\n");
}
rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
@@ -981,7 +1018,7 @@
rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc)
goto err_dma_mask;
- dev_warn(ndev_dev(ndev), "Cannot DMA consistent highmem\n");
+ dev_warn(&pdev->dev, "Cannot DMA consistent highmem\n");
}
ndev->self_mmio = pci_iomap(pdev, 0, 0);
@@ -1004,7 +1041,7 @@
static void amd_ntb_deinit_pci(struct amd_ntb_dev *ndev)
{
- struct pci_dev *pdev = ndev_pdev(ndev);
+ struct pci_dev *pdev = ndev->ntb.pdev;
pci_iounmap(pdev, ndev->self_mmio);
diff --git a/drivers/ntb/hw/amd/ntb_hw_amd.h b/drivers/ntb/hw/amd/ntb_hw_amd.h
index 13d73ed..8f3617a 100644
--- a/drivers/ntb/hw/amd/ntb_hw_amd.h
+++ b/drivers/ntb/hw/amd/ntb_hw_amd.h
@@ -211,9 +211,6 @@
struct dentry *debugfs_info;
};
-#define ndev_pdev(ndev) ((ndev)->ntb.pdev)
-#define ndev_name(ndev) pci_name(ndev_pdev(ndev))
-#define ndev_dev(ndev) (&ndev_pdev(ndev)->dev)
#define ntb_ndev(__ntb) container_of(__ntb, struct amd_ntb_dev, ntb)
#define hb_ndev(__work) container_of(__work, struct amd_ntb_dev, hb_timer.work)
diff --git a/drivers/ntb/hw/idt/Kconfig b/drivers/ntb/hw/idt/Kconfig
new file mode 100644
index 0000000..b360e56
--- /dev/null
+++ b/drivers/ntb/hw/idt/Kconfig
@@ -0,0 +1,31 @@
+config NTB_IDT
+ tristate "IDT PCIe-switch Non-Transparent Bridge support"
+ depends on PCI
+ help
+ This driver supports NTB of cappable IDT PCIe-switches.
+
+ Some of the pre-initializations must be made before IDT PCIe-switch
+ exposes it NT-functions correctly. It should be done by either proper
+ initialisation of EEPROM connected to master smbus of the switch or
+ by BIOS using slave-SMBus interface changing corresponding registers
+ value. Evidently it must be done before PCI bus enumeration is
+ finished in Linux kernel.
+
+ First of all partitions must be activated and properly assigned to all
+ the ports with NT-functions intended to be activated (see SWPARTxCTL
+ and SWPORTxCTL registers). Then all NT-function BARs must be enabled
+ with chosen valid aperture. For memory windows related BARs the
+ aperture settings shall determine the maximum size of memory windows
+ accepted by a BAR. Note that BAR0 must map PCI configuration space
+ registers.
+
+ It's worth to note, that since a part of this driver relies on the
+ BAR settings of peer NT-functions, the BAR setups can't be done over
+ kernel PCI fixups. That's why the alternative pre-initialization
+ techniques like BIOS using SMBus interface or EEPROM should be
+ utilized. Additionally if one needs to have temperature sensor
+ information printed to system log, the corresponding registers must
+ be initialized within BIOS/EEPROM as well.
+
+ If unsure, say N.
+
diff --git a/drivers/ntb/hw/idt/Makefile b/drivers/ntb/hw/idt/Makefile
new file mode 100644
index 0000000..a102cf1
--- /dev/null
+++ b/drivers/ntb/hw/idt/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_NTB_IDT) += ntb_hw_idt.o
diff --git a/drivers/ntb/hw/idt/ntb_hw_idt.c b/drivers/ntb/hw/idt/ntb_hw_idt.c
new file mode 100644
index 0000000..d44d7ef
--- /dev/null
+++ b/drivers/ntb/hw/idt/ntb_hw_idt.c
@@ -0,0 +1,2712 @@
+/*
+ * This file is provided under a GPLv2 license. When using or
+ * redistributing this file, you may do so under that license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright (C) 2016 T-Platforms All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+ * Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, one can be found http://www.gnu.org/licenses/.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * IDT PCIe-switch NTB Linux driver
+ *
+ * Contact Information:
+ * Serge Semin <fancer.lancer@gmail.com>, <Sergey.Semin@t-platforms.ru>
+ */
+
+#include <linux/stddef.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+#include <linux/sizes.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/pci.h>
+#include <linux/aer.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/debugfs.h>
+#include <linux/ntb.h>
+
+#include "ntb_hw_idt.h"
+
+#define NTB_NAME "ntb_hw_idt"
+#define NTB_DESC "IDT PCI-E Non-Transparent Bridge Driver"
+#define NTB_VER "2.0"
+#define NTB_IRQNAME "ntb_irq_idt"
+
+MODULE_DESCRIPTION(NTB_DESC);
+MODULE_VERSION(NTB_VER);
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("T-platforms");
+
+/*
+ * NT Endpoint registers table simplifying a loop access to the functionally
+ * related registers
+ */
+static const struct idt_ntb_regs ntdata_tbl = {
+ { {IDT_NT_BARSETUP0, IDT_NT_BARLIMIT0,
+ IDT_NT_BARLTBASE0, IDT_NT_BARUTBASE0},
+ {IDT_NT_BARSETUP1, IDT_NT_BARLIMIT1,
+ IDT_NT_BARLTBASE1, IDT_NT_BARUTBASE1},
+ {IDT_NT_BARSETUP2, IDT_NT_BARLIMIT2,
+ IDT_NT_BARLTBASE2, IDT_NT_BARUTBASE2},
+ {IDT_NT_BARSETUP3, IDT_NT_BARLIMIT3,
+ IDT_NT_BARLTBASE3, IDT_NT_BARUTBASE3},
+ {IDT_NT_BARSETUP4, IDT_NT_BARLIMIT4,
+ IDT_NT_BARLTBASE4, IDT_NT_BARUTBASE4},
+ {IDT_NT_BARSETUP5, IDT_NT_BARLIMIT5,
+ IDT_NT_BARLTBASE5, IDT_NT_BARUTBASE5} },
+ { {IDT_NT_INMSG0, IDT_NT_OUTMSG0, IDT_NT_INMSGSRC0},
+ {IDT_NT_INMSG1, IDT_NT_OUTMSG1, IDT_NT_INMSGSRC1},
+ {IDT_NT_INMSG2, IDT_NT_OUTMSG2, IDT_NT_INMSGSRC2},
+ {IDT_NT_INMSG3, IDT_NT_OUTMSG3, IDT_NT_INMSGSRC3} }
+};
+
+/*
+ * NT Endpoint ports data table with the corresponding pcie command, link
+ * status, control and BAR-related registers
+ */
+static const struct idt_ntb_port portdata_tbl[IDT_MAX_NR_PORTS] = {
+/*0*/ { IDT_SW_NTP0_PCIECMDSTS, IDT_SW_NTP0_PCIELCTLSTS,
+ IDT_SW_NTP0_NTCTL,
+ IDT_SW_SWPORT0CTL, IDT_SW_SWPORT0STS,
+ { {IDT_SW_NTP0_BARSETUP0, IDT_SW_NTP0_BARLIMIT0,
+ IDT_SW_NTP0_BARLTBASE0, IDT_SW_NTP0_BARUTBASE0},
+ {IDT_SW_NTP0_BARSETUP1, IDT_SW_NTP0_BARLIMIT1,
+ IDT_SW_NTP0_BARLTBASE1, IDT_SW_NTP0_BARUTBASE1},
+ {IDT_SW_NTP0_BARSETUP2, IDT_SW_NTP0_BARLIMIT2,
+ IDT_SW_NTP0_BARLTBASE2, IDT_SW_NTP0_BARUTBASE2},
+ {IDT_SW_NTP0_BARSETUP3, IDT_SW_NTP0_BARLIMIT3,
+ IDT_SW_NTP0_BARLTBASE3, IDT_SW_NTP0_BARUTBASE3},
+ {IDT_SW_NTP0_BARSETUP4, IDT_SW_NTP0_BARLIMIT4,
+ IDT_SW_NTP0_BARLTBASE4, IDT_SW_NTP0_BARUTBASE4},
+ {IDT_SW_NTP0_BARSETUP5, IDT_SW_NTP0_BARLIMIT5,
+ IDT_SW_NTP0_BARLTBASE5, IDT_SW_NTP0_BARUTBASE5} } },
+/*1*/ {0},
+/*2*/ { IDT_SW_NTP2_PCIECMDSTS, IDT_SW_NTP2_PCIELCTLSTS,
+ IDT_SW_NTP2_NTCTL,
+ IDT_SW_SWPORT2CTL, IDT_SW_SWPORT2STS,
+ { {IDT_SW_NTP2_BARSETUP0, IDT_SW_NTP2_BARLIMIT0,
+ IDT_SW_NTP2_BARLTBASE0, IDT_SW_NTP2_BARUTBASE0},
+ {IDT_SW_NTP2_BARSETUP1, IDT_SW_NTP2_BARLIMIT1,
+ IDT_SW_NTP2_BARLTBASE1, IDT_SW_NTP2_BARUTBASE1},
+ {IDT_SW_NTP2_BARSETUP2, IDT_SW_NTP2_BARLIMIT2,
+ IDT_SW_NTP2_BARLTBASE2, IDT_SW_NTP2_BARUTBASE2},
+ {IDT_SW_NTP2_BARSETUP3, IDT_SW_NTP2_BARLIMIT3,
+ IDT_SW_NTP2_BARLTBASE3, IDT_SW_NTP2_BARUTBASE3},
+ {IDT_SW_NTP2_BARSETUP4, IDT_SW_NTP2_BARLIMIT4,
+ IDT_SW_NTP2_BARLTBASE4, IDT_SW_NTP2_BARUTBASE4},
+ {IDT_SW_NTP2_BARSETUP5, IDT_SW_NTP2_BARLIMIT5,
+ IDT_SW_NTP2_BARLTBASE5, IDT_SW_NTP2_BARUTBASE5} } },
+/*3*/ {0},
+/*4*/ { IDT_SW_NTP4_PCIECMDSTS, IDT_SW_NTP4_PCIELCTLSTS,
+ IDT_SW_NTP4_NTCTL,
+ IDT_SW_SWPORT4CTL, IDT_SW_SWPORT4STS,
+ { {IDT_SW_NTP4_BARSETUP0, IDT_SW_NTP4_BARLIMIT0,
+ IDT_SW_NTP4_BARLTBASE0, IDT_SW_NTP4_BARUTBASE0},
+ {IDT_SW_NTP4_BARSETUP1, IDT_SW_NTP4_BARLIMIT1,
+ IDT_SW_NTP4_BARLTBASE1, IDT_SW_NTP4_BARUTBASE1},
+ {IDT_SW_NTP4_BARSETUP2, IDT_SW_NTP4_BARLIMIT2,
+ IDT_SW_NTP4_BARLTBASE2, IDT_SW_NTP4_BARUTBASE2},
+ {IDT_SW_NTP4_BARSETUP3, IDT_SW_NTP4_BARLIMIT3,
+ IDT_SW_NTP4_BARLTBASE3, IDT_SW_NTP4_BARUTBASE3},
+ {IDT_SW_NTP4_BARSETUP4, IDT_SW_NTP4_BARLIMIT4,
+ IDT_SW_NTP4_BARLTBASE4, IDT_SW_NTP4_BARUTBASE4},
+ {IDT_SW_NTP4_BARSETUP5, IDT_SW_NTP4_BARLIMIT5,
+ IDT_SW_NTP4_BARLTBASE5, IDT_SW_NTP4_BARUTBASE5} } },
+/*5*/ {0},
+/*6*/ { IDT_SW_NTP6_PCIECMDSTS, IDT_SW_NTP6_PCIELCTLSTS,
+ IDT_SW_NTP6_NTCTL,
+ IDT_SW_SWPORT6CTL, IDT_SW_SWPORT6STS,
+ { {IDT_SW_NTP6_BARSETUP0, IDT_SW_NTP6_BARLIMIT0,
+ IDT_SW_NTP6_BARLTBASE0, IDT_SW_NTP6_BARUTBASE0},
+ {IDT_SW_NTP6_BARSETUP1, IDT_SW_NTP6_BARLIMIT1,
+ IDT_SW_NTP6_BARLTBASE1, IDT_SW_NTP6_BARUTBASE1},
+ {IDT_SW_NTP6_BARSETUP2, IDT_SW_NTP6_BARLIMIT2,
+ IDT_SW_NTP6_BARLTBASE2, IDT_SW_NTP6_BARUTBASE2},
+ {IDT_SW_NTP6_BARSETUP3, IDT_SW_NTP6_BARLIMIT3,
+ IDT_SW_NTP6_BARLTBASE3, IDT_SW_NTP6_BARUTBASE3},
+ {IDT_SW_NTP6_BARSETUP4, IDT_SW_NTP6_BARLIMIT4,
+ IDT_SW_NTP6_BARLTBASE4, IDT_SW_NTP6_BARUTBASE4},
+ {IDT_SW_NTP6_BARSETUP5, IDT_SW_NTP6_BARLIMIT5,
+ IDT_SW_NTP6_BARLTBASE5, IDT_SW_NTP6_BARUTBASE5} } },
+/*7*/ {0},
+/*8*/ { IDT_SW_NTP8_PCIECMDSTS, IDT_SW_NTP8_PCIELCTLSTS,
+ IDT_SW_NTP8_NTCTL,
+ IDT_SW_SWPORT8CTL, IDT_SW_SWPORT8STS,
+ { {IDT_SW_NTP8_BARSETUP0, IDT_SW_NTP8_BARLIMIT0,
+ IDT_SW_NTP8_BARLTBASE0, IDT_SW_NTP8_BARUTBASE0},
+ {IDT_SW_NTP8_BARSETUP1, IDT_SW_NTP8_BARLIMIT1,
+ IDT_SW_NTP8_BARLTBASE1, IDT_SW_NTP8_BARUTBASE1},
+ {IDT_SW_NTP8_BARSETUP2, IDT_SW_NTP8_BARLIMIT2,
+ IDT_SW_NTP8_BARLTBASE2, IDT_SW_NTP8_BARUTBASE2},
+ {IDT_SW_NTP8_BARSETUP3, IDT_SW_NTP8_BARLIMIT3,
+ IDT_SW_NTP8_BARLTBASE3, IDT_SW_NTP8_BARUTBASE3},
+ {IDT_SW_NTP8_BARSETUP4, IDT_SW_NTP8_BARLIMIT4,
+ IDT_SW_NTP8_BARLTBASE4, IDT_SW_NTP8_BARUTBASE4},
+ {IDT_SW_NTP8_BARSETUP5, IDT_SW_NTP8_BARLIMIT5,
+ IDT_SW_NTP8_BARLTBASE5, IDT_SW_NTP8_BARUTBASE5} } },
+/*9*/ {0},
+/*10*/ {0},
+/*11*/ {0},
+/*12*/ { IDT_SW_NTP12_PCIECMDSTS, IDT_SW_NTP12_PCIELCTLSTS,
+ IDT_SW_NTP12_NTCTL,
+ IDT_SW_SWPORT12CTL, IDT_SW_SWPORT12STS,
+ { {IDT_SW_NTP12_BARSETUP0, IDT_SW_NTP12_BARLIMIT0,
+ IDT_SW_NTP12_BARLTBASE0, IDT_SW_NTP12_BARUTBASE0},
+ {IDT_SW_NTP12_BARSETUP1, IDT_SW_NTP12_BARLIMIT1,
+ IDT_SW_NTP12_BARLTBASE1, IDT_SW_NTP12_BARUTBASE1},
+ {IDT_SW_NTP12_BARSETUP2, IDT_SW_NTP12_BARLIMIT2,
+ IDT_SW_NTP12_BARLTBASE2, IDT_SW_NTP12_BARUTBASE2},
+ {IDT_SW_NTP12_BARSETUP3, IDT_SW_NTP12_BARLIMIT3,
+ IDT_SW_NTP12_BARLTBASE3, IDT_SW_NTP12_BARUTBASE3},
+ {IDT_SW_NTP12_BARSETUP4, IDT_SW_NTP12_BARLIMIT4,
+ IDT_SW_NTP12_BARLTBASE4, IDT_SW_NTP12_BARUTBASE4},
+ {IDT_SW_NTP12_BARSETUP5, IDT_SW_NTP12_BARLIMIT5,
+ IDT_SW_NTP12_BARLTBASE5, IDT_SW_NTP12_BARUTBASE5} } },
+/*13*/ {0},
+/*14*/ {0},
+/*15*/ {0},
+/*16*/ { IDT_SW_NTP16_PCIECMDSTS, IDT_SW_NTP16_PCIELCTLSTS,
+ IDT_SW_NTP16_NTCTL,
+ IDT_SW_SWPORT16CTL, IDT_SW_SWPORT16STS,
+ { {IDT_SW_NTP16_BARSETUP0, IDT_SW_NTP16_BARLIMIT0,
+ IDT_SW_NTP16_BARLTBASE0, IDT_SW_NTP16_BARUTBASE0},
+ {IDT_SW_NTP16_BARSETUP1, IDT_SW_NTP16_BARLIMIT1,
+ IDT_SW_NTP16_BARLTBASE1, IDT_SW_NTP16_BARUTBASE1},
+ {IDT_SW_NTP16_BARSETUP2, IDT_SW_NTP16_BARLIMIT2,
+ IDT_SW_NTP16_BARLTBASE2, IDT_SW_NTP16_BARUTBASE2},
+ {IDT_SW_NTP16_BARSETUP3, IDT_SW_NTP16_BARLIMIT3,
+ IDT_SW_NTP16_BARLTBASE3, IDT_SW_NTP16_BARUTBASE3},
+ {IDT_SW_NTP16_BARSETUP4, IDT_SW_NTP16_BARLIMIT4,
+ IDT_SW_NTP16_BARLTBASE4, IDT_SW_NTP16_BARUTBASE4},
+ {IDT_SW_NTP16_BARSETUP5, IDT_SW_NTP16_BARLIMIT5,
+ IDT_SW_NTP16_BARLTBASE5, IDT_SW_NTP16_BARUTBASE5} } },
+/*17*/ {0},
+/*18*/ {0},
+/*19*/ {0},
+/*20*/ { IDT_SW_NTP20_PCIECMDSTS, IDT_SW_NTP20_PCIELCTLSTS,
+ IDT_SW_NTP20_NTCTL,
+ IDT_SW_SWPORT20CTL, IDT_SW_SWPORT20STS,
+ { {IDT_SW_NTP20_BARSETUP0, IDT_SW_NTP20_BARLIMIT0,
+ IDT_SW_NTP20_BARLTBASE0, IDT_SW_NTP20_BARUTBASE0},
+ {IDT_SW_NTP20_BARSETUP1, IDT_SW_NTP20_BARLIMIT1,
+ IDT_SW_NTP20_BARLTBASE1, IDT_SW_NTP20_BARUTBASE1},
+ {IDT_SW_NTP20_BARSETUP2, IDT_SW_NTP20_BARLIMIT2,
+ IDT_SW_NTP20_BARLTBASE2, IDT_SW_NTP20_BARUTBASE2},
+ {IDT_SW_NTP20_BARSETUP3, IDT_SW_NTP20_BARLIMIT3,
+ IDT_SW_NTP20_BARLTBASE3, IDT_SW_NTP20_BARUTBASE3},
+ {IDT_SW_NTP20_BARSETUP4, IDT_SW_NTP20_BARLIMIT4,
+ IDT_SW_NTP20_BARLTBASE4, IDT_SW_NTP20_BARUTBASE4},
+ {IDT_SW_NTP20_BARSETUP5, IDT_SW_NTP20_BARLIMIT5,
+ IDT_SW_NTP20_BARLTBASE5, IDT_SW_NTP20_BARUTBASE5} } },
+/*21*/ {0},
+/*22*/ {0},
+/*23*/ {0}
+};
+
+/*
+ * IDT PCIe-switch partitions table with the corresponding control, status
+ * and messages control registers
+ */
+static const struct idt_ntb_part partdata_tbl[IDT_MAX_NR_PARTS] = {
+/*0*/ { IDT_SW_SWPART0CTL, IDT_SW_SWPART0STS,
+ {IDT_SW_SWP0MSGCTL0, IDT_SW_SWP0MSGCTL1,
+ IDT_SW_SWP0MSGCTL2, IDT_SW_SWP0MSGCTL3} },
+/*1*/ { IDT_SW_SWPART1CTL, IDT_SW_SWPART1STS,
+ {IDT_SW_SWP1MSGCTL0, IDT_SW_SWP1MSGCTL1,
+ IDT_SW_SWP1MSGCTL2, IDT_SW_SWP1MSGCTL3} },
+/*2*/ { IDT_SW_SWPART2CTL, IDT_SW_SWPART2STS,
+ {IDT_SW_SWP2MSGCTL0, IDT_SW_SWP2MSGCTL1,
+ IDT_SW_SWP2MSGCTL2, IDT_SW_SWP2MSGCTL3} },
+/*3*/ { IDT_SW_SWPART3CTL, IDT_SW_SWPART3STS,
+ {IDT_SW_SWP3MSGCTL0, IDT_SW_SWP3MSGCTL1,
+ IDT_SW_SWP3MSGCTL2, IDT_SW_SWP3MSGCTL3} },
+/*4*/ { IDT_SW_SWPART4CTL, IDT_SW_SWPART4STS,
+ {IDT_SW_SWP4MSGCTL0, IDT_SW_SWP4MSGCTL1,
+ IDT_SW_SWP4MSGCTL2, IDT_SW_SWP4MSGCTL3} },
+/*5*/ { IDT_SW_SWPART5CTL, IDT_SW_SWPART5STS,
+ {IDT_SW_SWP5MSGCTL0, IDT_SW_SWP5MSGCTL1,
+ IDT_SW_SWP5MSGCTL2, IDT_SW_SWP5MSGCTL3} },
+/*6*/ { IDT_SW_SWPART6CTL, IDT_SW_SWPART6STS,
+ {IDT_SW_SWP6MSGCTL0, IDT_SW_SWP6MSGCTL1,
+ IDT_SW_SWP6MSGCTL2, IDT_SW_SWP6MSGCTL3} },
+/*7*/ { IDT_SW_SWPART7CTL, IDT_SW_SWPART7STS,
+ {IDT_SW_SWP7MSGCTL0, IDT_SW_SWP7MSGCTL1,
+ IDT_SW_SWP7MSGCTL2, IDT_SW_SWP7MSGCTL3} }
+};
+
+/*
+ * DebugFS directory to place the driver debug file
+ */
+static struct dentry *dbgfs_topdir;
+
+/*=============================================================================
+ * 1. IDT PCIe-switch registers IO-functions
+ *
+ * Beside ordinary configuration space registers IDT PCIe-switch expose
+ * global configuration registers, which are used to determine state of other
+ * device ports as well as being notified of some switch-related events.
+ * Additionally all the configuration space registers of all the IDT
+ * PCIe-switch functions are mapped to the Global Address space, so each
+ * function can determine a configuration of any other PCI-function.
+ * Functions declared in this chapter are created to encapsulate access
+ * to configuration and global registers, so the driver code just need to
+ * provide IDT NTB hardware descriptor and a register address.
+ *=============================================================================
+ */
+
+/*
+ * idt_nt_write() - PCI configuration space registers write method
+ * @ndev: IDT NTB hardware driver descriptor
+ * @reg: Register to write data to
+ * @data: Value to write to the register
+ *
+ * IDT PCIe-switch registers are all Little endian.
+ */
+static void idt_nt_write(struct idt_ntb_dev *ndev,
+ const unsigned int reg, const u32 data)
+{
+ /*
+ * It's obvious bug to request a register exceeding the maximum possible
+ * value as well as to have it unaligned.
+ */
+ if (WARN_ON(reg > IDT_REG_PCI_MAX || !IS_ALIGNED(reg, IDT_REG_ALIGN)))
+ return;
+
+ /* Just write the value to the specified register */
+ iowrite32(data, ndev->cfgspc + (ptrdiff_t)reg);
+}
+
+/*
+ * idt_nt_read() - PCI configuration space registers read method
+ * @ndev: IDT NTB hardware driver descriptor
+ * @reg: Register to write data to
+ *
+ * IDT PCIe-switch Global configuration registers are all Little endian.
+ *
+ * Return: register value
+ */
+static u32 idt_nt_read(struct idt_ntb_dev *ndev, const unsigned int reg)
+{
+ /*
+ * It's obvious bug to request a register exceeding the maximum possible
+ * value as well as to have it unaligned.
+ */
+ if (WARN_ON(reg > IDT_REG_PCI_MAX || !IS_ALIGNED(reg, IDT_REG_ALIGN)))
+ return ~0;
+
+ /* Just read the value from the specified register */
+ return ioread32(ndev->cfgspc + (ptrdiff_t)reg);
+}
+
+/*
+ * idt_sw_write() - Global registers write method
+ * @ndev: IDT NTB hardware driver descriptor
+ * @reg: Register to write data to
+ * @data: Value to write to the register
+ *
+ * IDT PCIe-switch Global configuration registers are all Little endian.
+ */
+static void idt_sw_write(struct idt_ntb_dev *ndev,
+ const unsigned int reg, const u32 data)
+{
+ unsigned long irqflags;
+
+ /*
+ * It's obvious bug to request a register exceeding the maximum possible
+ * value as well as to have it unaligned.
+ */
+ if (WARN_ON(reg > IDT_REG_SW_MAX || !IS_ALIGNED(reg, IDT_REG_ALIGN)))
+ return;
+
+ /* Lock GASA registers operations */
+ spin_lock_irqsave(&ndev->gasa_lock, irqflags);
+ /* Set the global register address */
+ iowrite32((u32)reg, ndev->cfgspc + (ptrdiff_t)IDT_NT_GASAADDR);
+ /* Put the new value of the register */
+ iowrite32(data, ndev->cfgspc + (ptrdiff_t)IDT_NT_GASADATA);
+ /* Make sure the PCIe transactions are executed */
+ mmiowb();
+ /* Unlock GASA registers operations */
+ spin_unlock_irqrestore(&ndev->gasa_lock, irqflags);
+}
+
+/*
+ * idt_sw_read() - Global registers read method
+ * @ndev: IDT NTB hardware driver descriptor
+ * @reg: Register to write data to
+ *
+ * IDT PCIe-switch Global configuration registers are all Little endian.
+ *
+ * Return: register value
+ */
+static u32 idt_sw_read(struct idt_ntb_dev *ndev, const unsigned int reg)
+{
+ unsigned long irqflags;
+ u32 data;
+
+ /*
+ * It's obvious bug to request a register exceeding the maximum possible
+ * value as well as to have it unaligned.
+ */
+ if (WARN_ON(reg > IDT_REG_SW_MAX || !IS_ALIGNED(reg, IDT_REG_ALIGN)))
+ return ~0;
+
+ /* Lock GASA registers operations */
+ spin_lock_irqsave(&ndev->gasa_lock, irqflags);
+ /* Set the global register address */
+ iowrite32((u32)reg, ndev->cfgspc + (ptrdiff_t)IDT_NT_GASAADDR);
+ /* Get the data of the register (read ops acts as MMIO barrier) */
+ data = ioread32(ndev->cfgspc + (ptrdiff_t)IDT_NT_GASADATA);
+ /* Unlock GASA registers operations */
+ spin_unlock_irqrestore(&ndev->gasa_lock, irqflags);
+
+ return data;
+}
+
+/*
+ * idt_reg_set_bits() - set bits of a passed register
+ * @ndev: IDT NTB hardware driver descriptor
+ * @reg: Register to change bits of
+ * @reg_lock: Register access spin lock
+ * @valid_mask: Mask of valid bits
+ * @set_bits: Bitmask to set
+ *
+ * Helper method to check whether a passed bitfield is valid and set
+ * corresponding bits of a register.
+ *
+ * WARNING! Make sure the passed register isn't accessed over plane
+ * idt_nt_write() method (read method is ok to be used concurrently).
+ *
+ * Return: zero on success, negative error on invalid bitmask.
+ */
+static inline int idt_reg_set_bits(struct idt_ntb_dev *ndev, unsigned int reg,
+ spinlock_t *reg_lock,
+ u64 valid_mask, u64 set_bits)
+{
+ unsigned long irqflags;
+ u32 data;
+
+ if (set_bits & ~(u64)valid_mask)
+ return -EINVAL;
+
+ /* Lock access to the register unless the change is written back */
+ spin_lock_irqsave(reg_lock, irqflags);
+ data = idt_nt_read(ndev, reg) | (u32)set_bits;
+ idt_nt_write(ndev, reg, data);
+ /* Unlock the register */
+ spin_unlock_irqrestore(reg_lock, irqflags);
+
+ return 0;
+}
+
+/*
+ * idt_reg_clear_bits() - clear bits of a passed register
+ * @ndev: IDT NTB hardware driver descriptor
+ * @reg: Register to change bits of
+ * @reg_lock: Register access spin lock
+ * @set_bits: Bitmask to clear
+ *
+ * Helper method to check whether a passed bitfield is valid and clear
+ * corresponding bits of a register.
+ *
+ * NOTE! Invalid bits are always considered cleared so it's not an error
+ * to clear them over.
+ *
+ * WARNING! Make sure the passed register isn't accessed over plane
+ * idt_nt_write() method (read method is ok to use concurrently).
+ */
+static inline void idt_reg_clear_bits(struct idt_ntb_dev *ndev,
+ unsigned int reg, spinlock_t *reg_lock,
+ u64 clear_bits)
+{
+ unsigned long irqflags;
+ u32 data;
+
+ /* Lock access to the register unless the change is written back */
+ spin_lock_irqsave(reg_lock, irqflags);
+ data = idt_nt_read(ndev, reg) & ~(u32)clear_bits;
+ idt_nt_write(ndev, reg, data);
+ /* Unlock the register */
+ spin_unlock_irqrestore(reg_lock, irqflags);
+}
+
+/*===========================================================================
+ * 2. Ports operations
+ *
+ * IDT PCIe-switches can have from 3 up to 8 ports with possible
+ * NT-functions enabled. So all the possible ports need to be scanned looking
+ * for NTB activated. NTB API will have enumerated only the ports with NTB.
+ *===========================================================================
+ */
+
+/*
+ * idt_scan_ports() - scan IDT PCIe-switch ports collecting info in the tables
+ * @ndev: Pointer to the PCI device descriptor
+ *
+ * Return: zero on success, otherwise a negative error number.
+ */
+static int idt_scan_ports(struct idt_ntb_dev *ndev)
+{
+ unsigned char pidx, port, part;
+ u32 data, portsts, partsts;
+
+ /* Retrieve the local port number */
+ data = idt_nt_read(ndev, IDT_NT_PCIELCAP);
+ ndev->port = GET_FIELD(PCIELCAP_PORTNUM, data);
+
+ /* Retrieve the local partition number */
+ portsts = idt_sw_read(ndev, portdata_tbl[ndev->port].sts);
+ ndev->part = GET_FIELD(SWPORTxSTS_SWPART, portsts);
+
+ /* Initialize port/partition -> index tables with invalid values */
+ memset(ndev->port_idx_map, -EINVAL, sizeof(ndev->port_idx_map));
+ memset(ndev->part_idx_map, -EINVAL, sizeof(ndev->part_idx_map));
+
+ /*
+ * Walk over all the possible ports checking whether any of them has
+ * NT-function activated
+ */
+ ndev->peer_cnt = 0;
+ for (pidx = 0; pidx < ndev->swcfg->port_cnt; pidx++) {
+ port = ndev->swcfg->ports[pidx];
+ /* Skip local port */
+ if (port == ndev->port)
+ continue;
+
+ /* Read the port status register to get it partition */
+ portsts = idt_sw_read(ndev, portdata_tbl[port].sts);
+ part = GET_FIELD(SWPORTxSTS_SWPART, portsts);
+
+ /* Retrieve the partition status */
+ partsts = idt_sw_read(ndev, partdata_tbl[part].sts);
+ /* Check if partition state is active and port has NTB */
+ if (IS_FLD_SET(SWPARTxSTS_STATE, partsts, ACT) &&
+ (IS_FLD_SET(SWPORTxSTS_MODE, portsts, NT) ||
+ IS_FLD_SET(SWPORTxSTS_MODE, portsts, USNT) ||
+ IS_FLD_SET(SWPORTxSTS_MODE, portsts, USNTDMA) ||
+ IS_FLD_SET(SWPORTxSTS_MODE, portsts, NTDMA))) {
+ /* Save the port and partition numbers */
+ ndev->peers[ndev->peer_cnt].port = port;
+ ndev->peers[ndev->peer_cnt].part = part;
+ /* Fill in the port/partition -> index tables */
+ ndev->port_idx_map[port] = ndev->peer_cnt;
+ ndev->part_idx_map[part] = ndev->peer_cnt;
+ ndev->peer_cnt++;
+ }
+ }
+
+ dev_dbg(&ndev->ntb.pdev->dev, "Local port: %hhu, num of peers: %hhu\n",
+ ndev->port, ndev->peer_cnt);
+
+ /* It's useless to have this driver loaded if there is no any peer */
+ if (ndev->peer_cnt == 0) {
+ dev_warn(&ndev->ntb.pdev->dev, "No active peer found\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+/*
+ * idt_ntb_port_number() - get the local port number
+ * @ntb: NTB device context.
+ *
+ * Return: the local port number
+ */
+static int idt_ntb_port_number(struct ntb_dev *ntb)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ return ndev->port;
+}
+
+/*
+ * idt_ntb_peer_port_count() - get the number of peer ports
+ * @ntb: NTB device context.
+ *
+ * Return the count of detected peer NT-functions.
+ *
+ * Return: number of peer ports
+ */
+static int idt_ntb_peer_port_count(struct ntb_dev *ntb)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ return ndev->peer_cnt;
+}
+
+/*
+ * idt_ntb_peer_port_number() - get peer port by given index
+ * @ntb: NTB device context.
+ * @pidx: Peer port index.
+ *
+ * Return: peer port or negative error
+ */
+static int idt_ntb_peer_port_number(struct ntb_dev *ntb, int pidx)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ if (pidx < 0 || ndev->peer_cnt <= pidx)
+ return -EINVAL;
+
+ /* Return the detected NT-function port number */
+ return ndev->peers[pidx].port;
+}
+
+/*
+ * idt_ntb_peer_port_idx() - get peer port index by given port number
+ * @ntb: NTB device context.
+ * @port: Peer port number.
+ *
+ * Internal port -> index table is pre-initialized with -EINVAL values,
+ * so we just need to return it value
+ *
+ * Return: peer NT-function port index or negative error
+ */
+static int idt_ntb_peer_port_idx(struct ntb_dev *ntb, int port)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ if (port < 0 || IDT_MAX_NR_PORTS <= port)
+ return -EINVAL;
+
+ return ndev->port_idx_map[port];
+}
+
+/*===========================================================================
+ * 3. Link status operations
+ * There is no any ready-to-use method to have peer ports notified if NTB
+ * link is set up or got down. Instead global signal can be used instead.
+ * In case if any one of ports changes local NTB link state, it sends
+ * global signal and clears corresponding global state bit. Then all the ports
+ * receive a notification of that, so to make client driver being aware of
+ * possible NTB link change.
+ * Additionally each of active NT-functions is subscribed to PCIe-link
+ * state changes of peer ports.
+ *===========================================================================
+ */
+
+static void idt_ntb_local_link_disable(struct idt_ntb_dev *ndev);
+
+/*
+ * idt_init_link() - Initialize NTB link state notification subsystem
+ * @ndev: IDT NTB hardware driver descriptor
+ *
+ * Function performs the basic initialization of some global registers
+ * needed to enable IRQ-based notifications of PCIe Link Up/Down and
+ * Global Signal events.
+ * NOTE Since it's not possible to determine when all the NTB peer drivers are
+ * unloaded as well as have those registers accessed concurrently, we must
+ * preinitialize them with the same value and leave it uncleared on local
+ * driver unload.
+ */
+static void idt_init_link(struct idt_ntb_dev *ndev)
+{
+ u32 part_mask, port_mask, se_mask;
+ unsigned char pidx;
+
+ /* Initialize spin locker of Mapping Table access registers */
+ spin_lock_init(&ndev->mtbl_lock);
+
+ /* Walk over all detected peers collecting port and partition masks */
+ port_mask = ~BIT(ndev->port);
+ part_mask = ~BIT(ndev->part);
+ for (pidx = 0; pidx < ndev->peer_cnt; pidx++) {
+ port_mask &= ~BIT(ndev->peers[pidx].port);
+ part_mask &= ~BIT(ndev->peers[pidx].part);
+ }
+
+ /* Clean the Link Up/Down and GLobal Signal status registers */
+ idt_sw_write(ndev, IDT_SW_SELINKUPSTS, (u32)-1);
+ idt_sw_write(ndev, IDT_SW_SELINKDNSTS, (u32)-1);
+ idt_sw_write(ndev, IDT_SW_SEGSIGSTS, (u32)-1);
+
+ /* Unmask NT-activated partitions to receive Global Switch events */
+ idt_sw_write(ndev, IDT_SW_SEPMSK, part_mask);
+
+ /* Enable PCIe Link Up events of NT-activated ports */
+ idt_sw_write(ndev, IDT_SW_SELINKUPMSK, port_mask);
+
+ /* Enable PCIe Link Down events of NT-activated ports */
+ idt_sw_write(ndev, IDT_SW_SELINKDNMSK, port_mask);
+
+ /* Unmask NT-activated partitions to receive Global Signal events */
+ idt_sw_write(ndev, IDT_SW_SEGSIGMSK, part_mask);
+
+ /* Unmask Link Up/Down and Global Switch Events */
+ se_mask = ~(IDT_SEMSK_LINKUP | IDT_SEMSK_LINKDN | IDT_SEMSK_GSIGNAL);
+ idt_sw_write(ndev, IDT_SW_SEMSK, se_mask);
+
+ dev_dbg(&ndev->ntb.pdev->dev, "NTB link status events initialized");
+}
+
+/*
+ * idt_deinit_link() - deinitialize link subsystem
+ * @ndev: IDT NTB hardware driver descriptor
+ *
+ * Just disable the link back.
+ */
+static void idt_deinit_link(struct idt_ntb_dev *ndev)
+{
+ /* Disable the link */
+ idt_ntb_local_link_disable(ndev);
+
+ dev_dbg(&ndev->ntb.pdev->dev, "NTB link status events deinitialized");
+}
+
+/*
+ * idt_se_isr() - switch events ISR
+ * @ndev: IDT NTB hardware driver descriptor
+ * @ntint_sts: NT-function interrupt status
+ *
+ * This driver doesn't support IDT PCIe-switch dynamic reconfigurations,
+ * Failover capability, etc, so switch events are utilized to notify of
+ * PCIe and NTB link events.
+ * The method is called from PCIe ISR bottom-half routine.
+ */
+static void idt_se_isr(struct idt_ntb_dev *ndev, u32 ntint_sts)
+{
+ u32 sests;
+
+ /* Read Switch Events status */
+ sests = idt_sw_read(ndev, IDT_SW_SESTS);
+
+ /* Clean the Link Up/Down and Global Signal status registers */
+ idt_sw_write(ndev, IDT_SW_SELINKUPSTS, (u32)-1);
+ idt_sw_write(ndev, IDT_SW_SELINKDNSTS, (u32)-1);
+ idt_sw_write(ndev, IDT_SW_SEGSIGSTS, (u32)-1);
+
+ /* Clean the corresponding interrupt bit */
+ idt_nt_write(ndev, IDT_NT_NTINTSTS, IDT_NTINTSTS_SEVENT);
+
+ dev_dbg(&ndev->ntb.pdev->dev, "SE IRQ detected %#08x (SESTS %#08x)",
+ ntint_sts, sests);
+
+ /* Notify the client driver of possible link state change */
+ ntb_link_event(&ndev->ntb);
+}
+
+/*
+ * idt_ntb_local_link_enable() - enable the local NTB link.
+ * @ndev: IDT NTB hardware driver descriptor
+ *
+ * In order to enable the NTB link we need:
+ * - enable Completion TLPs translation
+ * - initialize mapping table to enable the Request ID translation
+ * - notify peers of NTB link state change
+ */
+static void idt_ntb_local_link_enable(struct idt_ntb_dev *ndev)
+{
+ u32 reqid, mtbldata = 0;
+ unsigned long irqflags;
+
+ /* Enable the ID protection and Completion TLPs translation */
+ idt_nt_write(ndev, IDT_NT_NTCTL, IDT_NTCTL_CPEN);
+
+ /* Retrieve the current Requester ID (Bus:Device:Function) */
+ reqid = idt_nt_read(ndev, IDT_NT_REQIDCAP);
+
+ /*
+ * Set the corresponding NT Mapping table entry of port partition index
+ * with the data to perform the Request ID translation
+ */
+ mtbldata = SET_FIELD(NTMTBLDATA_REQID, 0, reqid) |
+ SET_FIELD(NTMTBLDATA_PART, 0, ndev->part) |
+ IDT_NTMTBLDATA_VALID;
+ spin_lock_irqsave(&ndev->mtbl_lock, irqflags);
+ idt_nt_write(ndev, IDT_NT_NTMTBLADDR, ndev->part);
+ idt_nt_write(ndev, IDT_NT_NTMTBLDATA, mtbldata);
+ mmiowb();
+ spin_unlock_irqrestore(&ndev->mtbl_lock, irqflags);
+
+ /* Notify the peers by setting and clearing the global signal bit */
+ idt_nt_write(ndev, IDT_NT_NTGSIGNAL, IDT_NTGSIGNAL_SET);
+ idt_sw_write(ndev, IDT_SW_SEGSIGSTS, (u32)1 << ndev->part);
+}
+
+/*
+ * idt_ntb_local_link_disable() - disable the local NTB link.
+ * @ndev: IDT NTB hardware driver descriptor
+ *
+ * In order to enable the NTB link we need:
+ * - disable Completion TLPs translation
+ * - clear corresponding mapping table entry
+ * - notify peers of NTB link state change
+ */
+static void idt_ntb_local_link_disable(struct idt_ntb_dev *ndev)
+{
+ unsigned long irqflags;
+
+ /* Disable Completion TLPs translation */
+ idt_nt_write(ndev, IDT_NT_NTCTL, 0);
+
+ /* Clear the corresponding NT Mapping table entry */
+ spin_lock_irqsave(&ndev->mtbl_lock, irqflags);
+ idt_nt_write(ndev, IDT_NT_NTMTBLADDR, ndev->part);
+ idt_nt_write(ndev, IDT_NT_NTMTBLDATA, 0);
+ mmiowb();
+ spin_unlock_irqrestore(&ndev->mtbl_lock, irqflags);
+
+ /* Notify the peers by setting and clearing the global signal bit */
+ idt_nt_write(ndev, IDT_NT_NTGSIGNAL, IDT_NTGSIGNAL_SET);
+ idt_sw_write(ndev, IDT_SW_SEGSIGSTS, (u32)1 << ndev->part);
+}
+
+/*
+ * idt_ntb_local_link_is_up() - test wethter local NTB link is up
+ * @ndev: IDT NTB hardware driver descriptor
+ *
+ * Local link is up under the following conditions:
+ * - Bus mastering is enabled
+ * - NTCTL has Completion TLPs translation enabled
+ * - Mapping table permits Request TLPs translation
+ * NOTE: We don't need to check PCIe link state since it's obviously
+ * up while we are able to communicate with IDT PCIe-switch
+ *
+ * Return: true if link is up, otherwise false
+ */
+static bool idt_ntb_local_link_is_up(struct idt_ntb_dev *ndev)
+{
+ unsigned long irqflags;
+ u32 data;
+
+ /* Read the local Bus Master Enable status */
+ data = idt_nt_read(ndev, IDT_NT_PCICMDSTS);
+ if (!(data & IDT_PCICMDSTS_BME))
+ return false;
+
+ /* Read the local Completion TLPs translation enable status */
+ data = idt_nt_read(ndev, IDT_NT_NTCTL);
+ if (!(data & IDT_NTCTL_CPEN))
+ return false;
+
+ /* Read Mapping table entry corresponding to the local partition */
+ spin_lock_irqsave(&ndev->mtbl_lock, irqflags);
+ idt_nt_write(ndev, IDT_NT_NTMTBLADDR, ndev->part);
+ data = idt_nt_read(ndev, IDT_NT_NTMTBLDATA);
+ spin_unlock_irqrestore(&ndev->mtbl_lock, irqflags);
+
+ return !!(data & IDT_NTMTBLDATA_VALID);
+}
+
+/*
+ * idt_ntb_peer_link_is_up() - test whether peer NTB link is up
+ * @ndev: IDT NTB hardware driver descriptor
+ * @pidx: Peer port index
+ *
+ * Peer link is up under the following conditions:
+ * - PCIe link is up
+ * - Bus mastering is enabled
+ * - NTCTL has Completion TLPs translation enabled
+ * - Mapping table permits Request TLPs translation
+ *
+ * Return: true if link is up, otherwise false
+ */
+static bool idt_ntb_peer_link_is_up(struct idt_ntb_dev *ndev, int pidx)
+{
+ unsigned long irqflags;
+ unsigned char port;
+ u32 data;
+
+ /* Retrieve the device port number */
+ port = ndev->peers[pidx].port;
+
+ /* Check whether PCIe link is up */
+ data = idt_sw_read(ndev, portdata_tbl[port].sts);
+ if (!(data & IDT_SWPORTxSTS_LINKUP))
+ return false;
+
+ /* Check whether bus mastering is enabled on the peer port */
+ data = idt_sw_read(ndev, portdata_tbl[port].pcicmdsts);
+ if (!(data & IDT_PCICMDSTS_BME))
+ return false;
+
+ /* Check if Completion TLPs translation is enabled on the peer port */
+ data = idt_sw_read(ndev, portdata_tbl[port].ntctl);
+ if (!(data & IDT_NTCTL_CPEN))
+ return false;
+
+ /* Read Mapping table entry corresponding to the peer partition */
+ spin_lock_irqsave(&ndev->mtbl_lock, irqflags);
+ idt_nt_write(ndev, IDT_NT_NTMTBLADDR, ndev->peers[pidx].part);
+ data = idt_nt_read(ndev, IDT_NT_NTMTBLDATA);
+ spin_unlock_irqrestore(&ndev->mtbl_lock, irqflags);
+
+ return !!(data & IDT_NTMTBLDATA_VALID);
+}
+
+/*
+ * idt_ntb_link_is_up() - get the current ntb link state (NTB API callback)
+ * @ntb: NTB device context.
+ * @speed: OUT - The link speed expressed as PCIe generation number.
+ * @width: OUT - The link width expressed as the number of PCIe lanes.
+ *
+ * Get the bitfield of NTB link states for all peer ports
+ *
+ * Return: bitfield of indexed ports link state: bit is set/cleared if the
+ * link is up/down respectively.
+ */
+static u64 idt_ntb_link_is_up(struct ntb_dev *ntb,
+ enum ntb_speed *speed, enum ntb_width *width)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+ unsigned char pidx;
+ u64 status;
+ u32 data;
+
+ /* Retrieve the local link speed and width */
+ if (speed != NULL || width != NULL) {
+ data = idt_nt_read(ndev, IDT_NT_PCIELCTLSTS);
+ if (speed != NULL)
+ *speed = GET_FIELD(PCIELCTLSTS_CLS, data);
+ if (width != NULL)
+ *width = GET_FIELD(PCIELCTLSTS_NLW, data);
+ }
+
+ /* If local NTB link isn't up then all the links are considered down */
+ if (!idt_ntb_local_link_is_up(ndev))
+ return 0;
+
+ /* Collect all the peer ports link states into the bitfield */
+ status = 0;
+ for (pidx = 0; pidx < ndev->peer_cnt; pidx++) {
+ if (idt_ntb_peer_link_is_up(ndev, pidx))
+ status |= ((u64)1 << pidx);
+ }
+
+ return status;
+}
+
+/*
+ * idt_ntb_link_enable() - enable local port ntb link (NTB API callback)
+ * @ntb: NTB device context.
+ * @max_speed: The maximum link speed expressed as PCIe generation number.
+ * @max_width: The maximum link width expressed as the number of PCIe lanes.
+ *
+ * Enable just local NTB link. PCIe link parameters are ignored.
+ *
+ * Return: always zero.
+ */
+static int idt_ntb_link_enable(struct ntb_dev *ntb, enum ntb_speed speed,
+ enum ntb_width width)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ /* Just enable the local NTB link */
+ idt_ntb_local_link_enable(ndev);
+
+ dev_dbg(&ndev->ntb.pdev->dev, "Local NTB link enabled");
+
+ return 0;
+}
+
+/*
+ * idt_ntb_link_disable() - disable local port ntb link (NTB API callback)
+ * @ntb: NTB device context.
+ *
+ * Disable just local NTB link.
+ *
+ * Return: always zero.
+ */
+static int idt_ntb_link_disable(struct ntb_dev *ntb)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ /* Just disable the local NTB link */
+ idt_ntb_local_link_disable(ndev);
+
+ dev_dbg(&ndev->ntb.pdev->dev, "Local NTB link disabled");
+
+ return 0;
+}
+
+/*=============================================================================
+ * 4. Memory Window operations
+ *
+ * IDT PCIe-switches have two types of memory windows: MWs with direct
+ * address translation and MWs with LUT based translation. The first type of
+ * MWs is simple map of corresponding BAR address space to a memory space
+ * of specified target port. So it implemets just ont-to-one mapping. Lookup
+ * table in its turn can map one BAR address space to up to 24 different
+ * memory spaces of different ports.
+ * NT-functions BARs can be turned on to implement either direct or lookup
+ * table based address translations, so:
+ * BAR0 - NT configuration registers space/direct address translation
+ * BAR1 - direct address translation/upper address of BAR0x64
+ * BAR2 - direct address translation/Lookup table with either 12 or 24 entries
+ * BAR3 - direct address translation/upper address of BAR2x64
+ * BAR4 - direct address translation/Lookup table with either 12 or 24 entries
+ * BAR5 - direct address translation/upper address of BAR4x64
+ * Additionally BAR2 and BAR4 can't have 24-entries LUT enabled at the same
+ * time. Since the BARs setup can be rather complicated this driver implements
+ * a scanning algorithm to have all the possible memory windows configuration
+ * covered.
+ *
+ * NOTE 1 BAR setup must be done before Linux kernel enumerated NT-function
+ * of any port, so this driver would have memory windows configurations fixed.
+ * In this way all initializations must be performed either by platform BIOS
+ * or using EEPROM connected to IDT PCIe-switch master SMBus.
+ *
+ * NOTE 2 This driver expects BAR0 mapping NT-function configuration space.
+ * Easy calculation can give us an upper boundary of 29 possible memory windows
+ * per each NT-function if all the BARs are of 32bit type.
+ *=============================================================================
+ */
+
+/*
+ * idt_get_mw_count() - get memory window count
+ * @mw_type: Memory window type
+ *
+ * Return: number of memory windows with respect to the BAR type
+ */
+static inline unsigned char idt_get_mw_count(enum idt_mw_type mw_type)
+{
+ switch (mw_type) {
+ case IDT_MW_DIR:
+ return 1;
+ case IDT_MW_LUT12:
+ return 12;
+ case IDT_MW_LUT24:
+ return 24;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+/*
+ * idt_get_mw_name() - get memory window name
+ * @mw_type: Memory window type
+ *
+ * Return: pointer to a string with name
+ */
+static inline char *idt_get_mw_name(enum idt_mw_type mw_type)
+{
+ switch (mw_type) {
+ case IDT_MW_DIR:
+ return "DIR ";
+ case IDT_MW_LUT12:
+ return "LUT12";
+ case IDT_MW_LUT24:
+ return "LUT24";
+ default:
+ break;
+ }
+
+ return "unknown";
+}
+
+/*
+ * idt_scan_mws() - scan memory windows of the port
+ * @ndev: IDT NTB hardware driver descriptor
+ * @port: Port to get number of memory windows for
+ * @mw_cnt: Out - number of memory windows
+ *
+ * It walks over BAR setup registers of the specified port and determines
+ * the memory windows parameters if any activated.
+ *
+ * Return: array of memory windows
+ */
+static struct idt_mw_cfg *idt_scan_mws(struct idt_ntb_dev *ndev, int port,
+ unsigned char *mw_cnt)
+{
+ struct idt_mw_cfg mws[IDT_MAX_NR_MWS], *ret_mws;
+ const struct idt_ntb_bar *bars;
+ enum idt_mw_type mw_type;
+ unsigned char widx, bidx, en_cnt;
+ bool bar_64bit = false;
+ int aprt_size;
+ u32 data;
+
+ /* Retrieve the array of the BARs registers */
+ bars = portdata_tbl[port].bars;
+
+ /* Scan all the BARs belonging to the port */
+ *mw_cnt = 0;
+ for (bidx = 0; bidx < IDT_BAR_CNT; bidx += 1 + bar_64bit) {
+ /* Read BARSETUP register value */
+ data = idt_sw_read(ndev, bars[bidx].setup);
+
+ /* Skip disabled BARs */
+ if (!(data & IDT_BARSETUP_EN)) {
+ bar_64bit = false;
+ continue;
+ }
+
+ /* Skip next BARSETUP if current one has 64bit addressing */
+ bar_64bit = IS_FLD_SET(BARSETUP_TYPE, data, 64);
+
+ /* Skip configuration space mapping BARs */
+ if (data & IDT_BARSETUP_MODE_CFG)
+ continue;
+
+ /* Retrieve MW type/entries count and aperture size */
+ mw_type = GET_FIELD(BARSETUP_ATRAN, data);
+ en_cnt = idt_get_mw_count(mw_type);
+ aprt_size = (u64)1 << GET_FIELD(BARSETUP_SIZE, data);
+
+ /* Save configurations of all available memory windows */
+ for (widx = 0; widx < en_cnt; widx++, (*mw_cnt)++) {
+ /*
+ * IDT can expose a limited number of MWs, so it's bug
+ * to have more than the driver expects
+ */
+ if (*mw_cnt >= IDT_MAX_NR_MWS)
+ return ERR_PTR(-EINVAL);
+
+ /* Save basic MW info */
+ mws[*mw_cnt].type = mw_type;
+ mws[*mw_cnt].bar = bidx;
+ mws[*mw_cnt].idx = widx;
+ /* It's always DWORD aligned */
+ mws[*mw_cnt].addr_align = IDT_TRANS_ALIGN;
+ /* DIR and LUT approachs differently configure MWs */
+ if (mw_type == IDT_MW_DIR)
+ mws[*mw_cnt].size_max = aprt_size;
+ else if (mw_type == IDT_MW_LUT12)
+ mws[*mw_cnt].size_max = aprt_size / 16;
+ else
+ mws[*mw_cnt].size_max = aprt_size / 32;
+ mws[*mw_cnt].size_align = (mw_type == IDT_MW_DIR) ?
+ IDT_DIR_SIZE_ALIGN : mws[*mw_cnt].size_max;
+ }
+ }
+
+ /* Allocate memory for memory window descriptors */
+ ret_mws = devm_kcalloc(&ndev->ntb.pdev->dev, *mw_cnt,
+ sizeof(*ret_mws), GFP_KERNEL);
+ if (IS_ERR_OR_NULL(ret_mws))
+ return ERR_PTR(-ENOMEM);
+
+ /* Copy the info of detected memory windows */
+ memcpy(ret_mws, mws, (*mw_cnt)*sizeof(*ret_mws));
+
+ return ret_mws;
+}
+
+/*
+ * idt_init_mws() - initialize memory windows subsystem
+ * @ndev: IDT NTB hardware driver descriptor
+ *
+ * Scan BAR setup registers of local and peer ports to determine the
+ * outbound and inbound memory windows parameters
+ *
+ * Return: zero on success, otherwise a negative error number
+ */
+static int idt_init_mws(struct idt_ntb_dev *ndev)
+{
+ struct idt_ntb_peer *peer;
+ unsigned char pidx;
+
+ /* Scan memory windows of the local port */
+ ndev->mws = idt_scan_mws(ndev, ndev->port, &ndev->mw_cnt);
+ if (IS_ERR(ndev->mws)) {
+ dev_err(&ndev->ntb.pdev->dev,
+ "Failed to scan mws of local port %hhu", ndev->port);
+ return PTR_ERR(ndev->mws);
+ }
+
+ /* Scan memory windows of the peer ports */
+ for (pidx = 0; pidx < ndev->peer_cnt; pidx++) {
+ peer = &ndev->peers[pidx];
+ peer->mws = idt_scan_mws(ndev, peer->port, &peer->mw_cnt);
+ if (IS_ERR(peer->mws)) {
+ dev_err(&ndev->ntb.pdev->dev,
+ "Failed to scan mws of port %hhu", peer->port);
+ return PTR_ERR(peer->mws);
+ }
+ }
+
+ /* Initialize spin locker of the LUT registers */
+ spin_lock_init(&ndev->lut_lock);
+
+ dev_dbg(&ndev->ntb.pdev->dev, "Outbound and inbound MWs initialized");
+
+ return 0;
+}
+
+/*
+ * idt_ntb_mw_count() - number of inbound memory windows (NTB API callback)
+ * @ntb: NTB device context.
+ * @pidx: Port index of peer device.
+ *
+ * The value is returned for the specified peer, so generally speaking it can
+ * be different for different port depending on the IDT PCIe-switch
+ * initialization.
+ *
+ * Return: the number of memory windows.
+ */
+static int idt_ntb_mw_count(struct ntb_dev *ntb, int pidx)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ if (pidx < 0 || ndev->peer_cnt <= pidx)
+ return -EINVAL;
+
+ return ndev->peers[pidx].mw_cnt;
+}
+
+/*
+ * idt_ntb_mw_get_align() - inbound memory window parameters (NTB API callback)
+ * @ntb: NTB device context.
+ * @pidx: Port index of peer device.
+ * @widx: Memory window index.
+ * @addr_align: OUT - the base alignment for translating the memory window
+ * @size_align: OUT - the size alignment for translating the memory window
+ * @size_max: OUT - the maximum size of the memory window
+ *
+ * The peer memory window parameters have already been determined, so just
+ * return the corresponding values, which mustn't change within session.
+ *
+ * Return: Zero on success, otherwise a negative error number.
+ */
+static int idt_ntb_mw_get_align(struct ntb_dev *ntb, int pidx, int widx,
+ resource_size_t *addr_align,
+ resource_size_t *size_align,
+ resource_size_t *size_max)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+ struct idt_ntb_peer *peer;
+
+ if (pidx < 0 || ndev->peer_cnt <= pidx)
+ return -EINVAL;
+
+ peer = &ndev->peers[pidx];
+
+ if (widx < 0 || peer->mw_cnt <= widx)
+ return -EINVAL;
+
+ if (addr_align != NULL)
+ *addr_align = peer->mws[widx].addr_align;
+
+ if (size_align != NULL)
+ *size_align = peer->mws[widx].size_align;
+
+ if (size_max != NULL)
+ *size_max = peer->mws[widx].size_max;
+
+ return 0;
+}
+
+/*
+ * idt_ntb_peer_mw_count() - number of outbound memory windows
+ * (NTB API callback)
+ * @ntb: NTB device context.
+ *
+ * Outbound memory windows parameters have been determined based on the
+ * BAR setup registers value, which are mostly constants within one session.
+ *
+ * Return: the number of memory windows.
+ */
+static int idt_ntb_peer_mw_count(struct ntb_dev *ntb)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ return ndev->mw_cnt;
+}
+
+/*
+ * idt_ntb_peer_mw_get_addr() - get map address of an outbound memory window
+ * (NTB API callback)
+ * @ntb: NTB device context.
+ * @widx: Memory window index (within ntb_peer_mw_count() return value).
+ * @base: OUT - the base address of mapping region.
+ * @size: OUT - the size of mapping region.
+ *
+ * Return just parameters of BAR resources mapping. Size reflects just the size
+ * of the resource
+ *
+ * Return: Zero on success, otherwise a negative error number.
+ */
+static int idt_ntb_peer_mw_get_addr(struct ntb_dev *ntb, int widx,
+ phys_addr_t *base, resource_size_t *size)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ if (widx < 0 || ndev->mw_cnt <= widx)
+ return -EINVAL;
+
+ /* Mapping address is just properly shifted BAR resource start */
+ if (base != NULL)
+ *base = pci_resource_start(ntb->pdev, ndev->mws[widx].bar) +
+ ndev->mws[widx].idx * ndev->mws[widx].size_max;
+
+ /* Mapping size has already been calculated at MWs scanning */
+ if (size != NULL)
+ *size = ndev->mws[widx].size_max;
+
+ return 0;
+}
+
+/*
+ * idt_ntb_peer_mw_set_trans() - set a translation address of a memory window
+ * (NTB API callback)
+ * @ntb: NTB device context.
+ * @pidx: Port index of peer device the translation address received from.
+ * @widx: Memory window index.
+ * @addr: The dma address of the shared memory to access.
+ * @size: The size of the shared memory to access.
+ *
+ * The Direct address translation and LUT base translation is initialized a
+ * bit differenet. Although the parameters restriction are now determined by
+ * the same code.
+ *
+ * Return: Zero on success, otherwise an error number.
+ */
+static int idt_ntb_peer_mw_set_trans(struct ntb_dev *ntb, int pidx, int widx,
+ u64 addr, resource_size_t size)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+ struct idt_mw_cfg *mw_cfg;
+ u32 data = 0, lutoff = 0;
+
+ if (pidx < 0 || ndev->peer_cnt <= pidx)
+ return -EINVAL;
+
+ if (widx < 0 || ndev->mw_cnt <= widx)
+ return -EINVAL;
+
+ /*
+ * Retrieve the memory window config to make sure the passed arguments
+ * fit it restrictions
+ */
+ mw_cfg = &ndev->mws[widx];
+ if (!IS_ALIGNED(addr, mw_cfg->addr_align))
+ return -EINVAL;
+ if (!IS_ALIGNED(size, mw_cfg->size_align) || size > mw_cfg->size_max)
+ return -EINVAL;
+
+ /* DIR and LUT based translations are initialized differently */
+ if (mw_cfg->type == IDT_MW_DIR) {
+ const struct idt_ntb_bar *bar = &ntdata_tbl.bars[mw_cfg->bar];
+ u64 limit;
+ /* Set destination partition of translation */
+ data = idt_nt_read(ndev, bar->setup);
+ data = SET_FIELD(BARSETUP_TPART, data, ndev->peers[pidx].part);
+ idt_nt_write(ndev, bar->setup, data);
+ /* Set translation base address */
+ idt_nt_write(ndev, bar->ltbase, (u32)addr);
+ idt_nt_write(ndev, bar->utbase, (u32)(addr >> 32));
+ /* Set the custom BAR aperture limit */
+ limit = pci_resource_start(ntb->pdev, mw_cfg->bar) + size;
+ idt_nt_write(ndev, bar->limit, (u32)limit);
+ if (IS_FLD_SET(BARSETUP_TYPE, data, 64))
+ idt_nt_write(ndev, (bar + 1)->limit, (limit >> 32));
+ } else {
+ unsigned long irqflags;
+ /* Initialize corresponding LUT entry */
+ lutoff = SET_FIELD(LUTOFFSET_INDEX, 0, mw_cfg->idx) |
+ SET_FIELD(LUTOFFSET_BAR, 0, mw_cfg->bar);
+ data = SET_FIELD(LUTUDATA_PART, 0, ndev->peers[pidx].part) |
+ IDT_LUTUDATA_VALID;
+ spin_lock_irqsave(&ndev->lut_lock, irqflags);
+ idt_nt_write(ndev, IDT_NT_LUTOFFSET, lutoff);
+ idt_nt_write(ndev, IDT_NT_LUTLDATA, (u32)addr);
+ idt_nt_write(ndev, IDT_NT_LUTMDATA, (u32)(addr >> 32));
+ idt_nt_write(ndev, IDT_NT_LUTUDATA, data);
+ mmiowb();
+ spin_unlock_irqrestore(&ndev->lut_lock, irqflags);
+ /* Limit address isn't specified since size is fixed for LUT */
+ }
+
+ return 0;
+}
+
+/*
+ * idt_ntb_peer_mw_clear_trans() - clear the outbound MW translation address
+ * (NTB API callback)
+ * @ntb: NTB device context.
+ * @pidx: Port index of peer device.
+ * @widx: Memory window index.
+ *
+ * It effectively disables the translation over the specified outbound MW.
+ *
+ * Return: Zero on success, otherwise an error number.
+ */
+static int idt_ntb_peer_mw_clear_trans(struct ntb_dev *ntb, int pidx,
+ int widx)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+ struct idt_mw_cfg *mw_cfg;
+
+ if (pidx < 0 || ndev->peer_cnt <= pidx)
+ return -EINVAL;
+
+ if (widx < 0 || ndev->mw_cnt <= widx)
+ return -EINVAL;
+
+ mw_cfg = &ndev->mws[widx];
+
+ /* DIR and LUT based translations are initialized differently */
+ if (mw_cfg->type == IDT_MW_DIR) {
+ const struct idt_ntb_bar *bar = &ntdata_tbl.bars[mw_cfg->bar];
+ u32 data;
+ /* Read BARSETUP to check BAR type */
+ data = idt_nt_read(ndev, bar->setup);
+ /* Disable translation by specifying zero BAR limit */
+ idt_nt_write(ndev, bar->limit, 0);
+ if (IS_FLD_SET(BARSETUP_TYPE, data, 64))
+ idt_nt_write(ndev, (bar + 1)->limit, 0);
+ } else {
+ unsigned long irqflags;
+ u32 lutoff;
+ /* Clear the corresponding LUT entry up */
+ lutoff = SET_FIELD(LUTOFFSET_INDEX, 0, mw_cfg->idx) |
+ SET_FIELD(LUTOFFSET_BAR, 0, mw_cfg->bar);
+ spin_lock_irqsave(&ndev->lut_lock, irqflags);
+ idt_nt_write(ndev, IDT_NT_LUTOFFSET, lutoff);
+ idt_nt_write(ndev, IDT_NT_LUTLDATA, 0);
+ idt_nt_write(ndev, IDT_NT_LUTMDATA, 0);
+ idt_nt_write(ndev, IDT_NT_LUTUDATA, 0);
+ mmiowb();
+ spin_unlock_irqrestore(&ndev->lut_lock, irqflags);
+ }
+
+ return 0;
+}
+
+/*=============================================================================
+ * 5. Doorbell operations
+ *
+ * Doorbell functionality of IDT PCIe-switches is pretty unusual. First of
+ * all there is global doorbell register which state can by changed by any
+ * NT-function of the IDT device in accordance with global permissions. These
+ * permissions configs are not supported by NTB API, so it must be done by
+ * either BIOS or EEPROM settings. In the same way the state of the global
+ * doorbell is reflected to the NT-functions local inbound doorbell registers.
+ * It can lead to situations when client driver sets some peer doorbell bits
+ * and get them bounced back to local inbound doorbell if permissions are
+ * granted.
+ * Secondly there is just one IRQ vector for Doorbell, Message, Temperature
+ * and Switch events, so if client driver left any of Doorbell bits set and
+ * some other event occurred, the driver will be notified of Doorbell event
+ * again.
+ *=============================================================================
+ */
+
+/*
+ * idt_db_isr() - doorbell event ISR
+ * @ndev: IDT NTB hardware driver descriptor
+ * @ntint_sts: NT-function interrupt status
+ *
+ * Doorbell event happans when DBELL bit of NTINTSTS switches from 0 to 1.
+ * It happens only when unmasked doorbell bits are set to ones on completely
+ * zeroed doorbell register.
+ * The method is called from PCIe ISR bottom-half routine.
+ */
+static void idt_db_isr(struct idt_ntb_dev *ndev, u32 ntint_sts)
+{
+ /*
+ * Doorbell IRQ status will be cleaned only when client
+ * driver unsets all the doorbell bits.
+ */
+ dev_dbg(&ndev->ntb.pdev->dev, "DB IRQ detected %#08x", ntint_sts);
+
+ /* Notify the client driver of possible doorbell state change */
+ ntb_db_event(&ndev->ntb, 0);
+}
+
+/*
+ * idt_ntb_db_valid_mask() - get a mask of doorbell bits supported by the ntb
+ * (NTB API callback)
+ * @ntb: NTB device context.
+ *
+ * IDT PCIe-switches expose just one Doorbell register of DWORD size.
+ *
+ * Return: A mask of doorbell bits supported by the ntb.
+ */
+static u64 idt_ntb_db_valid_mask(struct ntb_dev *ntb)
+{
+ return IDT_DBELL_MASK;
+}
+
+/*
+ * idt_ntb_db_read() - read the local doorbell register (NTB API callback)
+ * @ntb: NTB device context.
+ *
+ * There is just on inbound doorbell register of each NT-function, so
+ * this method return it value.
+ *
+ * Return: The bits currently set in the local doorbell register.
+ */
+static u64 idt_ntb_db_read(struct ntb_dev *ntb)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ return idt_nt_read(ndev, IDT_NT_INDBELLSTS);
+}
+
+/*
+ * idt_ntb_db_clear() - clear bits in the local doorbell register
+ * (NTB API callback)
+ * @ntb: NTB device context.
+ * @db_bits: Doorbell bits to clear.
+ *
+ * Clear bits of inbound doorbell register by writing ones to it.
+ *
+ * NOTE! Invalid bits are always considered cleared so it's not an error
+ * to clear them over.
+ *
+ * Return: always zero as success.
+ */
+static int idt_ntb_db_clear(struct ntb_dev *ntb, u64 db_bits)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ idt_nt_write(ndev, IDT_NT_INDBELLSTS, (u32)db_bits);
+
+ return 0;
+}
+
+/*
+ * idt_ntb_db_read_mask() - read the local doorbell mask (NTB API callback)
+ * @ntb: NTB device context.
+ *
+ * Each inbound doorbell bit can be masked from generating IRQ by setting
+ * the corresponding bit in inbound doorbell mask. So this method returns
+ * the value of the register.
+ *
+ * Return: The bits currently set in the local doorbell mask register.
+ */
+static u64 idt_ntb_db_read_mask(struct ntb_dev *ntb)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ return idt_nt_read(ndev, IDT_NT_INDBELLMSK);
+}
+
+/*
+ * idt_ntb_db_set_mask() - set bits in the local doorbell mask
+ * (NTB API callback)
+ * @ntb: NTB device context.
+ * @db_bits: Doorbell mask bits to set.
+ *
+ * The inbound doorbell register mask value must be read, then OR'ed with
+ * passed field and only then set back.
+ *
+ * Return: zero on success, negative error if invalid argument passed.
+ */
+static int idt_ntb_db_set_mask(struct ntb_dev *ntb, u64 db_bits)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ return idt_reg_set_bits(ndev, IDT_NT_INDBELLMSK, &ndev->db_mask_lock,
+ IDT_DBELL_MASK, db_bits);
+}
+
+/*
+ * idt_ntb_db_clear_mask() - clear bits in the local doorbell mask
+ * (NTB API callback)
+ * @ntb: NTB device context.
+ * @db_bits: Doorbell bits to clear.
+ *
+ * The method just clears the set bits up in accordance with the passed
+ * bitfield. IDT PCIe-switch shall generate an interrupt if there hasn't
+ * been any unmasked bit set before current unmasking. Otherwise IRQ won't
+ * be generated since there is only one IRQ vector for all doorbells.
+ *
+ * Return: always zero as success
+ */
+static int idt_ntb_db_clear_mask(struct ntb_dev *ntb, u64 db_bits)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ idt_reg_clear_bits(ndev, IDT_NT_INDBELLMSK, &ndev->db_mask_lock,
+ db_bits);
+
+ return 0;
+}
+
+/*
+ * idt_ntb_peer_db_set() - set bits in the peer doorbell register
+ * (NTB API callback)
+ * @ntb: NTB device context.
+ * @db_bits: Doorbell bits to set.
+ *
+ * IDT PCIe-switches exposes local outbound doorbell register to change peer
+ * inbound doorbell register state.
+ *
+ * Return: zero on success, negative error if invalid argument passed.
+ */
+static int idt_ntb_peer_db_set(struct ntb_dev *ntb, u64 db_bits)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ if (db_bits & ~(u64)IDT_DBELL_MASK)
+ return -EINVAL;
+
+ idt_nt_write(ndev, IDT_NT_OUTDBELLSET, (u32)db_bits);
+ return 0;
+}
+
+/*=============================================================================
+ * 6. Messaging operations
+ *
+ * Each NT-function of IDT PCIe-switch has four inbound and four outbound
+ * message registers. Each outbound message register can be connected to one or
+ * even more than one peer inbound message registers by setting global
+ * configurations. Since NTB API permits one-on-one message registers mapping
+ * only, the driver acts in according with that restriction.
+ *=============================================================================
+ */
+
+/*
+ * idt_init_msg() - initialize messaging interface
+ * @ndev: IDT NTB hardware driver descriptor
+ *
+ * Just initialize the message registers routing tables locker.
+ */
+static void idt_init_msg(struct idt_ntb_dev *ndev)
+{
+ unsigned char midx;
+
+ /* Init the messages routing table lockers */
+ for (midx = 0; midx < IDT_MSG_CNT; midx++)
+ spin_lock_init(&ndev->msg_locks[midx]);
+
+ dev_dbg(&ndev->ntb.pdev->dev, "NTB Messaging initialized");
+}
+
+/*
+ * idt_msg_isr() - message event ISR
+ * @ndev: IDT NTB hardware driver descriptor
+ * @ntint_sts: NT-function interrupt status
+ *
+ * Message event happens when MSG bit of NTINTSTS switches from 0 to 1.
+ * It happens only when unmasked message status bits are set to ones on
+ * completely zeroed message status register.
+ * The method is called from PCIe ISR bottom-half routine.
+ */
+static void idt_msg_isr(struct idt_ntb_dev *ndev, u32 ntint_sts)
+{
+ /*
+ * Message IRQ status will be cleaned only when client
+ * driver unsets all the message status bits.
+ */
+ dev_dbg(&ndev->ntb.pdev->dev, "Message IRQ detected %#08x", ntint_sts);
+
+ /* Notify the client driver of possible message status change */
+ ntb_msg_event(&ndev->ntb);
+}
+
+/*
+ * idt_ntb_msg_count() - get the number of message registers (NTB API callback)
+ * @ntb: NTB device context.
+ *
+ * IDT PCIe-switches support four message registers.
+ *
+ * Return: the number of message registers.
+ */
+static int idt_ntb_msg_count(struct ntb_dev *ntb)
+{
+ return IDT_MSG_CNT;
+}
+
+/*
+ * idt_ntb_msg_inbits() - get a bitfield of inbound message registers status
+ * (NTB API callback)
+ * @ntb: NTB device context.
+ *
+ * NT message status register is shared between inbound and outbound message
+ * registers status
+ *
+ * Return: bitfield of inbound message registers.
+ */
+static u64 idt_ntb_msg_inbits(struct ntb_dev *ntb)
+{
+ return (u64)IDT_INMSG_MASK;
+}
+
+/*
+ * idt_ntb_msg_outbits() - get a bitfield of outbound message registers status
+ * (NTB API callback)
+ * @ntb: NTB device context.
+ *
+ * NT message status register is shared between inbound and outbound message
+ * registers status
+ *
+ * Return: bitfield of outbound message registers.
+ */
+static u64 idt_ntb_msg_outbits(struct ntb_dev *ntb)
+{
+ return (u64)IDT_OUTMSG_MASK;
+}
+
+/*
+ * idt_ntb_msg_read_sts() - read the message registers status (NTB API callback)
+ * @ntb: NTB device context.
+ *
+ * IDT PCIe-switches expose message status registers to notify drivers of
+ * incoming data and failures in case if peer message register isn't freed.
+ *
+ * Return: status bits of message registers
+ */
+static u64 idt_ntb_msg_read_sts(struct ntb_dev *ntb)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ return idt_nt_read(ndev, IDT_NT_MSGSTS);
+}
+
+/*
+ * idt_ntb_msg_clear_sts() - clear status bits of message registers
+ * (NTB API callback)
+ * @ntb: NTB device context.
+ * @sts_bits: Status bits to clear.
+ *
+ * Clear bits in the status register by writing ones.
+ *
+ * NOTE! Invalid bits are always considered cleared so it's not an error
+ * to clear them over.
+ *
+ * Return: always zero as success.
+ */
+static int idt_ntb_msg_clear_sts(struct ntb_dev *ntb, u64 sts_bits)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ idt_nt_write(ndev, IDT_NT_MSGSTS, sts_bits);
+
+ return 0;
+}
+
+/*
+ * idt_ntb_msg_set_mask() - set mask of message register status bits
+ * (NTB API callback)
+ * @ntb: NTB device context.
+ * @mask_bits: Mask bits.
+ *
+ * Mask the message status bits from raising an IRQ.
+ *
+ * Return: zero on success, negative error if invalid argument passed.
+ */
+static int idt_ntb_msg_set_mask(struct ntb_dev *ntb, u64 mask_bits)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ return idt_reg_set_bits(ndev, IDT_NT_MSGSTSMSK, &ndev->msg_mask_lock,
+ IDT_MSG_MASK, mask_bits);
+}
+
+/*
+ * idt_ntb_msg_clear_mask() - clear message registers mask
+ * (NTB API callback)
+ * @ntb: NTB device context.
+ * @mask_bits: Mask bits.
+ *
+ * Clear mask of message status bits IRQs.
+ *
+ * Return: always zero as success.
+ */
+static int idt_ntb_msg_clear_mask(struct ntb_dev *ntb, u64 mask_bits)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ idt_reg_clear_bits(ndev, IDT_NT_MSGSTSMSK, &ndev->msg_mask_lock,
+ mask_bits);
+
+ return 0;
+}
+
+/*
+ * idt_ntb_msg_read() - read message register with specified index
+ * (NTB API callback)
+ * @ntb: NTB device context.
+ * @midx: Message register index
+ * @pidx: OUT - Port index of peer device a message retrieved from
+ * @msg: OUT - Data
+ *
+ * Read data from the specified message register and source register.
+ *
+ * Return: zero on success, negative error if invalid argument passed.
+ */
+static int idt_ntb_msg_read(struct ntb_dev *ntb, int midx, int *pidx, u32 *msg)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ if (midx < 0 || IDT_MSG_CNT <= midx)
+ return -EINVAL;
+
+ /* Retrieve source port index of the message */
+ if (pidx != NULL) {
+ u32 srcpart;
+
+ srcpart = idt_nt_read(ndev, ntdata_tbl.msgs[midx].src);
+ *pidx = ndev->part_idx_map[srcpart];
+
+ /* Sanity check partition index (for initial case) */
+ if (*pidx == -EINVAL)
+ *pidx = 0;
+ }
+
+ /* Retrieve data of the corresponding message register */
+ if (msg != NULL)
+ *msg = idt_nt_read(ndev, ntdata_tbl.msgs[midx].in);
+
+ return 0;
+}
+
+/*
+ * idt_ntb_msg_write() - write data to the specified message register
+ * (NTB API callback)
+ * @ntb: NTB device context.
+ * @midx: Message register index
+ * @pidx: Port index of peer device a message being sent to
+ * @msg: Data to send
+ *
+ * Just try to send data to a peer. Message status register should be
+ * checked by client driver.
+ *
+ * Return: zero on success, negative error if invalid argument passed.
+ */
+static int idt_ntb_msg_write(struct ntb_dev *ntb, int midx, int pidx, u32 msg)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+ unsigned long irqflags;
+ u32 swpmsgctl = 0;
+
+ if (midx < 0 || IDT_MSG_CNT <= midx)
+ return -EINVAL;
+
+ if (pidx < 0 || ndev->peer_cnt <= pidx)
+ return -EINVAL;
+
+ /* Collect the routing information */
+ swpmsgctl = SET_FIELD(SWPxMSGCTL_REG, 0, midx) |
+ SET_FIELD(SWPxMSGCTL_PART, 0, ndev->peers[pidx].part);
+
+ /* Lock the messages routing table of the specified register */
+ spin_lock_irqsave(&ndev->msg_locks[midx], irqflags);
+ /* Set the route and send the data */
+ idt_sw_write(ndev, partdata_tbl[ndev->part].msgctl[midx], swpmsgctl);
+ idt_nt_write(ndev, ntdata_tbl.msgs[midx].out, msg);
+ mmiowb();
+ /* Unlock the messages routing table */
+ spin_unlock_irqrestore(&ndev->msg_locks[midx], irqflags);
+
+ /* Client driver shall check the status register */
+ return 0;
+}
+
+/*=============================================================================
+ * 7. Temperature sensor operations
+ *
+ * IDT PCIe-switch has an embedded temperature sensor, which can be used to
+ * warn a user-space of possible chip overheating. Since workload temperature
+ * can be different on different platforms, temperature thresholds as well as
+ * general sensor settings must be setup in the framework of BIOS/EEPROM
+ * initializations. It includes the actual sensor enabling as well.
+ *=============================================================================
+ */
+
+/*
+ * idt_read_temp() - read temperature from chip sensor
+ * @ntb: NTB device context.
+ * @val: OUT - integer value of temperature
+ * @frac: OUT - fraction
+ */
+static void idt_read_temp(struct idt_ntb_dev *ndev, unsigned char *val,
+ unsigned char *frac)
+{
+ u32 data;
+
+ /* Read the data from TEMP field of the TMPSTS register */
+ data = idt_sw_read(ndev, IDT_SW_TMPSTS);
+ data = GET_FIELD(TMPSTS_TEMP, data);
+ /* TEMP field has one fractional bit and seven integer bits */
+ *val = data >> 1;
+ *frac = ((data & 0x1) ? 5 : 0);
+}
+
+/*
+ * idt_temp_isr() - temperature sensor alarm events ISR
+ * @ndev: IDT NTB hardware driver descriptor
+ * @ntint_sts: NT-function interrupt status
+ *
+ * It handles events of temperature crossing alarm thresholds. Since reading
+ * of TMPALARM register clears it up, the function doesn't analyze the
+ * read value, instead the current temperature value just warningly printed to
+ * log.
+ * The method is called from PCIe ISR bottom-half routine.
+ */
+static void idt_temp_isr(struct idt_ntb_dev *ndev, u32 ntint_sts)
+{
+ unsigned char val, frac;
+
+ /* Read the current temperature value */
+ idt_read_temp(ndev, &val, &frac);
+
+ /* Read the temperature alarm to clean the alarm status out */
+ /*(void)idt_sw_read(ndev, IDT_SW_TMPALARM);*/
+
+ /* Clean the corresponding interrupt bit */
+ idt_nt_write(ndev, IDT_NT_NTINTSTS, IDT_NTINTSTS_TMPSENSOR);
+
+ dev_dbg(&ndev->ntb.pdev->dev,
+ "Temp sensor IRQ detected %#08x", ntint_sts);
+
+ /* Print temperature value to log */
+ dev_warn(&ndev->ntb.pdev->dev, "Temperature %hhu.%hhu", val, frac);
+}
+
+/*=============================================================================
+ * 8. ISRs related operations
+ *
+ * IDT PCIe-switch has strangely developed IRQ system. There is just one
+ * interrupt vector for doorbell and message registers. So the hardware driver
+ * can't determine actual source of IRQ if, for example, message event happened
+ * while any of unmasked doorbell is still set. The similar situation may be if
+ * switch or temperature sensor events pop up. The difference is that SEVENT
+ * and TMPSENSOR bits of NT interrupt status register can be cleaned by
+ * IRQ handler so a next interrupt request won't have false handling of
+ * corresponding events.
+ * The hardware driver has only bottom-half handler of the IRQ, since if any
+ * of events happened the device won't raise it again before the last one is
+ * handled by clearing of corresponding NTINTSTS bit.
+ *=============================================================================
+ */
+
+static irqreturn_t idt_thread_isr(int irq, void *devid);
+
+/*
+ * idt_init_isr() - initialize PCIe interrupt handler
+ * @ndev: IDT NTB hardware driver descriptor
+ *
+ * Return: zero on success, otherwise a negative error number.
+ */
+static int idt_init_isr(struct idt_ntb_dev *ndev)
+{
+ struct pci_dev *pdev = ndev->ntb.pdev;
+ u32 ntint_mask;
+ int ret;
+
+ /* Allocate just one interrupt vector for the ISR */
+ ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI | PCI_IRQ_LEGACY);
+ if (ret != 1) {
+ dev_err(&pdev->dev, "Failed to allocate IRQ vector");
+ return ret;
+ }
+
+ /* Retrieve the IRQ vector */
+ ret = pci_irq_vector(pdev, 0);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to get IRQ vector");
+ goto err_free_vectors;
+ }
+
+ /* Set the IRQ handler */
+ ret = devm_request_threaded_irq(&pdev->dev, ret, NULL, idt_thread_isr,
+ IRQF_ONESHOT, NTB_IRQNAME, ndev);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to set MSI IRQ handler, %d", ret);
+ goto err_free_vectors;
+ }
+
+ /* Unmask Message/Doorbell/SE/Temperature interrupts */
+ ntint_mask = idt_nt_read(ndev, IDT_NT_NTINTMSK) & ~IDT_NTINTMSK_ALL;
+ idt_nt_write(ndev, IDT_NT_NTINTMSK, ntint_mask);
+
+ /* From now on the interrupts are enabled */
+ dev_dbg(&pdev->dev, "NTB interrupts initialized");
+
+ return 0;
+
+err_free_vectors:
+ pci_free_irq_vectors(pdev);
+
+ return ret;
+}
+
+
+/*
+ * idt_deinit_ist() - deinitialize PCIe interrupt handler
+ * @ndev: IDT NTB hardware driver descriptor
+ *
+ * Disable corresponding interrupts and free allocated IRQ vectors.
+ */
+static void idt_deinit_isr(struct idt_ntb_dev *ndev)
+{
+ struct pci_dev *pdev = ndev->ntb.pdev;
+ u32 ntint_mask;
+
+ /* Mask interrupts back */
+ ntint_mask = idt_nt_read(ndev, IDT_NT_NTINTMSK) | IDT_NTINTMSK_ALL;
+ idt_nt_write(ndev, IDT_NT_NTINTMSK, ntint_mask);
+
+ /* Manually free IRQ otherwise PCI free irq vectors will fail */
+ devm_free_irq(&pdev->dev, pci_irq_vector(pdev, 0), ndev);
+
+ /* Free allocated IRQ vectors */
+ pci_free_irq_vectors(pdev);
+
+ dev_dbg(&pdev->dev, "NTB interrupts deinitialized");
+}
+
+/*
+ * idt_thread_isr() - NT function interrupts handler
+ * @irq: IRQ number
+ * @devid: Custom buffer
+ *
+ * It reads current NT interrupts state register and handles all the event
+ * it declares.
+ * The method is bottom-half routine of actual default PCIe IRQ handler.
+ */
+static irqreturn_t idt_thread_isr(int irq, void *devid)
+{
+ struct idt_ntb_dev *ndev = devid;
+ bool handled = false;
+ u32 ntint_sts;
+
+ /* Read the NT interrupts status register */
+ ntint_sts = idt_nt_read(ndev, IDT_NT_NTINTSTS);
+
+ /* Handle messaging interrupts */
+ if (ntint_sts & IDT_NTINTSTS_MSG) {
+ idt_msg_isr(ndev, ntint_sts);
+ handled = true;
+ }
+
+ /* Handle doorbell interrupts */
+ if (ntint_sts & IDT_NTINTSTS_DBELL) {
+ idt_db_isr(ndev, ntint_sts);
+ handled = true;
+ }
+
+ /* Handle switch event interrupts */
+ if (ntint_sts & IDT_NTINTSTS_SEVENT) {
+ idt_se_isr(ndev, ntint_sts);
+ handled = true;
+ }
+
+ /* Handle temperature sensor interrupt */
+ if (ntint_sts & IDT_NTINTSTS_TMPSENSOR) {
+ idt_temp_isr(ndev, ntint_sts);
+ handled = true;
+ }
+
+ dev_dbg(&ndev->ntb.pdev->dev, "IDT IRQs 0x%08x handled", ntint_sts);
+
+ return handled ? IRQ_HANDLED : IRQ_NONE;
+}
+
+/*===========================================================================
+ * 9. NTB hardware driver initialization
+ *===========================================================================
+ */
+
+/*
+ * NTB API operations
+ */
+static const struct ntb_dev_ops idt_ntb_ops = {
+ .port_number = idt_ntb_port_number,
+ .peer_port_count = idt_ntb_peer_port_count,
+ .peer_port_number = idt_ntb_peer_port_number,
+ .peer_port_idx = idt_ntb_peer_port_idx,
+ .link_is_up = idt_ntb_link_is_up,
+ .link_enable = idt_ntb_link_enable,
+ .link_disable = idt_ntb_link_disable,
+ .mw_count = idt_ntb_mw_count,
+ .mw_get_align = idt_ntb_mw_get_align,
+ .peer_mw_count = idt_ntb_peer_mw_count,
+ .peer_mw_get_addr = idt_ntb_peer_mw_get_addr,
+ .peer_mw_set_trans = idt_ntb_peer_mw_set_trans,
+ .peer_mw_clear_trans = idt_ntb_peer_mw_clear_trans,
+ .db_valid_mask = idt_ntb_db_valid_mask,
+ .db_read = idt_ntb_db_read,
+ .db_clear = idt_ntb_db_clear,
+ .db_read_mask = idt_ntb_db_read_mask,
+ .db_set_mask = idt_ntb_db_set_mask,
+ .db_clear_mask = idt_ntb_db_clear_mask,
+ .peer_db_set = idt_ntb_peer_db_set,
+ .msg_count = idt_ntb_msg_count,
+ .msg_inbits = idt_ntb_msg_inbits,
+ .msg_outbits = idt_ntb_msg_outbits,
+ .msg_read_sts = idt_ntb_msg_read_sts,
+ .msg_clear_sts = idt_ntb_msg_clear_sts,
+ .msg_set_mask = idt_ntb_msg_set_mask,
+ .msg_clear_mask = idt_ntb_msg_clear_mask,
+ .msg_read = idt_ntb_msg_read,
+ .msg_write = idt_ntb_msg_write
+};
+
+/*
+ * idt_register_device() - register IDT NTB device
+ * @ndev: IDT NTB hardware driver descriptor
+ *
+ * Return: zero on success, otherwise a negative error number.
+ */
+static int idt_register_device(struct idt_ntb_dev *ndev)
+{
+ int ret;
+
+ /* Initialize the rest of NTB device structure and register it */
+ ndev->ntb.ops = &idt_ntb_ops;
+ ndev->ntb.topo = NTB_TOPO_PRI;
+
+ ret = ntb_register_device(&ndev->ntb);
+ if (ret != 0) {
+ dev_err(&ndev->ntb.pdev->dev, "Failed to register NTB device");
+ return ret;
+ }
+
+ dev_dbg(&ndev->ntb.pdev->dev, "NTB device successfully registered");
+
+ return 0;
+}
+
+/*
+ * idt_unregister_device() - unregister IDT NTB device
+ * @ndev: IDT NTB hardware driver descriptor
+ */
+static void idt_unregister_device(struct idt_ntb_dev *ndev)
+{
+ /* Just unregister the NTB device */
+ ntb_unregister_device(&ndev->ntb);
+
+ dev_dbg(&ndev->ntb.pdev->dev, "NTB device unregistered");
+}
+
+/*=============================================================================
+ * 10. DebugFS node initialization
+ *=============================================================================
+ */
+
+static ssize_t idt_dbgfs_info_read(struct file *filp, char __user *ubuf,
+ size_t count, loff_t *offp);
+
+/*
+ * Driver DebugFS info file operations
+ */
+static const struct file_operations idt_dbgfs_info_ops = {
+ .owner = THIS_MODULE,
+ .open = simple_open,
+ .read = idt_dbgfs_info_read
+};
+
+/*
+ * idt_dbgfs_info_read() - DebugFS read info node callback
+ * @file: File node descriptor.
+ * @ubuf: User-space buffer to put data to
+ * @count: Size of the buffer
+ * @offp: Offset within the buffer
+ */
+static ssize_t idt_dbgfs_info_read(struct file *filp, char __user *ubuf,
+ size_t count, loff_t *offp)
+{
+ struct idt_ntb_dev *ndev = filp->private_data;
+ unsigned char temp, frac, idx, pidx, cnt;
+ ssize_t ret = 0, off = 0;
+ unsigned long irqflags;
+ enum ntb_speed speed;
+ enum ntb_width width;
+ char *strbuf;
+ size_t size;
+ u32 data;
+
+ /* Lets limit the buffer size the way the Intel/AMD drivers do */
+ size = min_t(size_t, count, 0x1000U);
+
+ /* Allocate the memory for the buffer */
+ strbuf = kmalloc(size, GFP_KERNEL);
+ if (strbuf == NULL)
+ return -ENOMEM;
+
+ /* Put the data into the string buffer */
+ off += scnprintf(strbuf + off, size - off,
+ "\n\t\tIDT NTB device Information:\n\n");
+
+ /* General local device configurations */
+ off += scnprintf(strbuf + off, size - off,
+ "Local Port %hhu, Partition %hhu\n", ndev->port, ndev->part);
+
+ /* Peer ports information */
+ off += scnprintf(strbuf + off, size - off, "Peers:\n");
+ for (idx = 0; idx < ndev->peer_cnt; idx++) {
+ off += scnprintf(strbuf + off, size - off,
+ "\t%hhu. Port %hhu, Partition %hhu\n",
+ idx, ndev->peers[idx].port, ndev->peers[idx].part);
+ }
+
+ /* Links status */
+ data = idt_ntb_link_is_up(&ndev->ntb, &speed, &width);
+ off += scnprintf(strbuf + off, size - off,
+ "NTB link status\t- 0x%08x, ", data);
+ off += scnprintf(strbuf + off, size - off, "PCIe Gen %d x%d lanes\n",
+ speed, width);
+
+ /* Mapping table entries */
+ off += scnprintf(strbuf + off, size - off, "NTB Mapping Table:\n");
+ for (idx = 0; idx < IDT_MTBL_ENTRY_CNT; idx++) {
+ spin_lock_irqsave(&ndev->mtbl_lock, irqflags);
+ idt_nt_write(ndev, IDT_NT_NTMTBLADDR, idx);
+ data = idt_nt_read(ndev, IDT_NT_NTMTBLDATA);
+ spin_unlock_irqrestore(&ndev->mtbl_lock, irqflags);
+
+ /* Print valid entries only */
+ if (data & IDT_NTMTBLDATA_VALID) {
+ off += scnprintf(strbuf + off, size - off,
+ "\t%hhu. Partition %d, Requester ID 0x%04x\n",
+ idx, GET_FIELD(NTMTBLDATA_PART, data),
+ GET_FIELD(NTMTBLDATA_REQID, data));
+ }
+ }
+ off += scnprintf(strbuf + off, size - off, "\n");
+
+ /* Outbound memory windows information */
+ off += scnprintf(strbuf + off, size - off,
+ "Outbound Memory Windows:\n");
+ for (idx = 0; idx < ndev->mw_cnt; idx += cnt) {
+ data = ndev->mws[idx].type;
+ cnt = idt_get_mw_count(data);
+
+ /* Print Memory Window information */
+ if (data == IDT_MW_DIR)
+ off += scnprintf(strbuf + off, size - off,
+ "\t%hhu.\t", idx);
+ else
+ off += scnprintf(strbuf + off, size - off,
+ "\t%hhu-%hhu.\t", idx, idx + cnt - 1);
+
+ off += scnprintf(strbuf + off, size - off, "%s BAR%hhu, ",
+ idt_get_mw_name(data), ndev->mws[idx].bar);
+
+ off += scnprintf(strbuf + off, size - off,
+ "Address align 0x%08llx, ", ndev->mws[idx].addr_align);
+
+ off += scnprintf(strbuf + off, size - off,
+ "Size align 0x%08llx, Size max %llu\n",
+ ndev->mws[idx].size_align, ndev->mws[idx].size_max);
+ }
+
+ /* Inbound memory windows information */
+ for (pidx = 0; pidx < ndev->peer_cnt; pidx++) {
+ off += scnprintf(strbuf + off, size - off,
+ "Inbound Memory Windows for peer %hhu (Port %hhu):\n",
+ pidx, ndev->peers[pidx].port);
+
+ /* Print Memory Windows information */
+ for (idx = 0; idx < ndev->peers[pidx].mw_cnt; idx += cnt) {
+ data = ndev->peers[pidx].mws[idx].type;
+ cnt = idt_get_mw_count(data);
+
+ if (data == IDT_MW_DIR)
+ off += scnprintf(strbuf + off, size - off,
+ "\t%hhu.\t", idx);
+ else
+ off += scnprintf(strbuf + off, size - off,
+ "\t%hhu-%hhu.\t", idx, idx + cnt - 1);
+
+ off += scnprintf(strbuf + off, size - off,
+ "%s BAR%hhu, ", idt_get_mw_name(data),
+ ndev->peers[pidx].mws[idx].bar);
+
+ off += scnprintf(strbuf + off, size - off,
+ "Address align 0x%08llx, ",
+ ndev->peers[pidx].mws[idx].addr_align);
+
+ off += scnprintf(strbuf + off, size - off,
+ "Size align 0x%08llx, Size max %llu\n",
+ ndev->peers[pidx].mws[idx].size_align,
+ ndev->peers[pidx].mws[idx].size_max);
+ }
+ }
+ off += scnprintf(strbuf + off, size - off, "\n");
+
+ /* Doorbell information */
+ data = idt_sw_read(ndev, IDT_SW_GDBELLSTS);
+ off += scnprintf(strbuf + off, size - off,
+ "Global Doorbell state\t- 0x%08x\n", data);
+ data = idt_ntb_db_read(&ndev->ntb);
+ off += scnprintf(strbuf + off, size - off,
+ "Local Doorbell state\t- 0x%08x\n", data);
+ data = idt_nt_read(ndev, IDT_NT_INDBELLMSK);
+ off += scnprintf(strbuf + off, size - off,
+ "Local Doorbell mask\t- 0x%08x\n", data);
+ off += scnprintf(strbuf + off, size - off, "\n");
+
+ /* Messaging information */
+ off += scnprintf(strbuf + off, size - off,
+ "Message event valid\t- 0x%08x\n", IDT_MSG_MASK);
+ data = idt_ntb_msg_read_sts(&ndev->ntb);
+ off += scnprintf(strbuf + off, size - off,
+ "Message event status\t- 0x%08x\n", data);
+ data = idt_nt_read(ndev, IDT_NT_MSGSTSMSK);
+ off += scnprintf(strbuf + off, size - off,
+ "Message event mask\t- 0x%08x\n", data);
+ off += scnprintf(strbuf + off, size - off,
+ "Message data:\n");
+ for (idx = 0; idx < IDT_MSG_CNT; idx++) {
+ int src;
+ (void)idt_ntb_msg_read(&ndev->ntb, idx, &src, &data);
+ off += scnprintf(strbuf + off, size - off,
+ "\t%hhu. 0x%08x from peer %hhu (Port %hhu)\n",
+ idx, data, src, ndev->peers[src].port);
+ }
+ off += scnprintf(strbuf + off, size - off, "\n");
+
+ /* Current temperature */
+ idt_read_temp(ndev, &temp, &frac);
+ off += scnprintf(strbuf + off, size - off,
+ "Switch temperature\t\t- %hhu.%hhuC\n", temp, frac);
+
+ /* Copy the buffer to the User Space */
+ ret = simple_read_from_buffer(ubuf, count, offp, strbuf, off);
+ kfree(strbuf);
+
+ return ret;
+}
+
+/*
+ * idt_init_dbgfs() - initialize DebugFS node
+ * @ndev: IDT NTB hardware driver descriptor
+ *
+ * Return: zero on success, otherwise a negative error number.
+ */
+static int idt_init_dbgfs(struct idt_ntb_dev *ndev)
+{
+ char devname[64];
+
+ /* If the top directory is not created then do nothing */
+ if (IS_ERR_OR_NULL(dbgfs_topdir)) {
+ dev_info(&ndev->ntb.pdev->dev, "Top DebugFS directory absent");
+ return PTR_ERR(dbgfs_topdir);
+ }
+
+ /* Create the info file node */
+ snprintf(devname, 64, "info:%s", pci_name(ndev->ntb.pdev));
+ ndev->dbgfs_info = debugfs_create_file(devname, 0400, dbgfs_topdir,
+ ndev, &idt_dbgfs_info_ops);
+ if (IS_ERR(ndev->dbgfs_info)) {
+ dev_dbg(&ndev->ntb.pdev->dev, "Failed to create DebugFS node");
+ return PTR_ERR(ndev->dbgfs_info);
+ }
+
+ dev_dbg(&ndev->ntb.pdev->dev, "NTB device DebugFS node created");
+
+ return 0;
+}
+
+/*
+ * idt_deinit_dbgfs() - deinitialize DebugFS node
+ * @ndev: IDT NTB hardware driver descriptor
+ *
+ * Just discard the info node from DebugFS
+ */
+static void idt_deinit_dbgfs(struct idt_ntb_dev *ndev)
+{
+ debugfs_remove(ndev->dbgfs_info);
+
+ dev_dbg(&ndev->ntb.pdev->dev, "NTB device DebugFS node discarded");
+}
+
+/*=============================================================================
+ * 11. Basic PCIe device initialization
+ *=============================================================================
+ */
+
+/*
+ * idt_check_setup() - Check whether the IDT PCIe-swtich is properly
+ * pre-initialized
+ * @pdev: Pointer to the PCI device descriptor
+ *
+ * Return: zero on success, otherwise a negative error number.
+ */
+static int idt_check_setup(struct pci_dev *pdev)
+{
+ u32 data;
+ int ret;
+
+ /* Read the BARSETUP0 */
+ ret = pci_read_config_dword(pdev, IDT_NT_BARSETUP0, &data);
+ if (ret != 0) {
+ dev_err(&pdev->dev,
+ "Failed to read BARSETUP0 config register");
+ return ret;
+ }
+
+ /* Check whether the BAR0 register is enabled to be of config space */
+ if (!(data & IDT_BARSETUP_EN) || !(data & IDT_BARSETUP_MODE_CFG)) {
+ dev_err(&pdev->dev, "BAR0 doesn't map config space");
+ return -EINVAL;
+ }
+
+ /* Configuration space BAR0 must have certain size */
+ if ((data & IDT_BARSETUP_SIZE_MASK) != IDT_BARSETUP_SIZE_CFG) {
+ dev_err(&pdev->dev, "Invalid size of config space");
+ return -EINVAL;
+ }
+
+ dev_dbg(&pdev->dev, "NTB device pre-initialized correctly");
+
+ return 0;
+}
+
+/*
+ * Create the IDT PCIe-switch driver descriptor
+ * @pdev: Pointer to the PCI device descriptor
+ * @id: IDT PCIe-device configuration
+ *
+ * It just allocates a memory for IDT PCIe-switch device structure and
+ * initializes some commonly used fields.
+ *
+ * No need of release method, since managed device resource is used for
+ * memory allocation.
+ *
+ * Return: pointer to the descriptor, otherwise a negative error number.
+ */
+static struct idt_ntb_dev *idt_create_dev(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct idt_ntb_dev *ndev;
+
+ /* Allocate memory for the IDT PCIe-device descriptor */
+ ndev = devm_kzalloc(&pdev->dev, sizeof(*ndev), GFP_KERNEL);
+ if (IS_ERR_OR_NULL(ndev)) {
+ dev_err(&pdev->dev, "Memory allocation failed for descriptor");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ /* Save the IDT PCIe-switch ports configuration */
+ ndev->swcfg = (struct idt_89hpes_cfg *)id->driver_data;
+ /* Save the PCI-device pointer inside the NTB device structure */
+ ndev->ntb.pdev = pdev;
+
+ /* Initialize spin locker of Doorbell, Message and GASA registers */
+ spin_lock_init(&ndev->db_mask_lock);
+ spin_lock_init(&ndev->msg_mask_lock);
+ spin_lock_init(&ndev->gasa_lock);
+
+ dev_info(&pdev->dev, "IDT %s discovered", ndev->swcfg->name);
+
+ dev_dbg(&pdev->dev, "NTB device descriptor created");
+
+ return ndev;
+}
+
+/*
+ * idt_init_pci() - initialize the basic PCI-related subsystem
+ * @ndev: Pointer to the IDT PCIe-switch driver descriptor
+ *
+ * Managed device resources will be freed automatically in case of failure or
+ * driver detachment.
+ *
+ * Return: zero on success, otherwise negative error number.
+ */
+static int idt_init_pci(struct idt_ntb_dev *ndev)
+{
+ struct pci_dev *pdev = ndev->ntb.pdev;
+ int ret;
+
+ /* Initialize the bit mask of DMA */
+ ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (ret != 0) {
+ ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to set DMA bit mask\n");
+ return ret;
+ }
+ dev_warn(&pdev->dev, "Cannot set DMA highmem bit mask\n");
+ }
+ ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (ret != 0) {
+ ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (ret != 0) {
+ dev_err(&pdev->dev,
+ "Failed to set consistent DMA bit mask\n");
+ return ret;
+ }
+ dev_warn(&pdev->dev,
+ "Cannot set consistent DMA highmem bit mask\n");
+ }
+
+ /*
+ * Enable the device advanced error reporting. It's not critical to
+ * have AER disabled in the kernel.
+ */
+ ret = pci_enable_pcie_error_reporting(pdev);
+ if (ret != 0)
+ dev_warn(&pdev->dev, "PCIe AER capability disabled\n");
+ else /* Cleanup uncorrectable error status before getting to init */
+ pci_cleanup_aer_uncorrect_error_status(pdev);
+
+ /* First enable the PCI device */
+ ret = pcim_enable_device(pdev);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to enable PCIe device\n");
+ goto err_disable_aer;
+ }
+
+ /*
+ * Enable the bus mastering, which effectively enables MSI IRQs and
+ * Request TLPs translation
+ */
+ pci_set_master(pdev);
+
+ /* Request all BARs resources and map BAR0 only */
+ ret = pcim_iomap_regions_request_all(pdev, 1, NTB_NAME);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to request resources\n");
+ goto err_clear_master;
+ }
+
+ /* Retrieve virtual address of BAR0 - PCI configuration space */
+ ndev->cfgspc = pcim_iomap_table(pdev)[0];
+
+ /* Put the IDT driver data pointer to the PCI-device private pointer */
+ pci_set_drvdata(pdev, ndev);
+
+ dev_dbg(&pdev->dev, "NT-function PCIe interface initialized");
+
+ return 0;
+
+err_clear_master:
+ pci_clear_master(pdev);
+err_disable_aer:
+ (void)pci_disable_pcie_error_reporting(pdev);
+
+ return ret;
+}
+
+/*
+ * idt_deinit_pci() - deinitialize the basic PCI-related subsystem
+ * @ndev: Pointer to the IDT PCIe-switch driver descriptor
+ *
+ * Managed resources will be freed on the driver detachment
+ */
+static void idt_deinit_pci(struct idt_ntb_dev *ndev)
+{
+ struct pci_dev *pdev = ndev->ntb.pdev;
+
+ /* Clean up the PCI-device private data pointer */
+ pci_set_drvdata(pdev, NULL);
+
+ /* Clear the bus master disabling the Request TLPs translation */
+ pci_clear_master(pdev);
+
+ /* Disable the AER capability */
+ (void)pci_disable_pcie_error_reporting(pdev);
+
+ dev_dbg(&pdev->dev, "NT-function PCIe interface cleared");
+}
+
+/*===========================================================================
+ * 12. PCI bus callback functions
+ *===========================================================================
+ */
+
+/*
+ * idt_pci_probe() - PCI device probe callback
+ * @pdev: Pointer to PCI device structure
+ * @id: PCIe device custom descriptor
+ *
+ * Return: zero on success, otherwise negative error number
+ */
+static int idt_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct idt_ntb_dev *ndev;
+ int ret;
+
+ /* Check whether IDT PCIe-switch is properly pre-initialized */
+ ret = idt_check_setup(pdev);
+ if (ret != 0)
+ return ret;
+
+ /* Allocate the memory for IDT NTB device data */
+ ndev = idt_create_dev(pdev, id);
+ if (IS_ERR_OR_NULL(ndev))
+ return PTR_ERR(ndev);
+
+ /* Initialize the basic PCI subsystem of the device */
+ ret = idt_init_pci(ndev);
+ if (ret != 0)
+ return ret;
+
+ /* Scan ports of the IDT PCIe-switch */
+ (void)idt_scan_ports(ndev);
+
+ /* Initialize NTB link events subsystem */
+ idt_init_link(ndev);
+
+ /* Initialize MWs subsystem */
+ ret = idt_init_mws(ndev);
+ if (ret != 0)
+ goto err_deinit_link;
+
+ /* Initialize Messaging subsystem */
+ idt_init_msg(ndev);
+
+ /* Initialize IDT interrupts handler */
+ ret = idt_init_isr(ndev);
+ if (ret != 0)
+ goto err_deinit_link;
+
+ /* Register IDT NTB devices on the NTB bus */
+ ret = idt_register_device(ndev);
+ if (ret != 0)
+ goto err_deinit_isr;
+
+ /* Initialize DebugFS info node */
+ (void)idt_init_dbgfs(ndev);
+
+ /* IDT PCIe-switch NTB driver is finally initialized */
+ dev_info(&pdev->dev, "IDT NTB device is ready");
+
+ /* May the force be with us... */
+ return 0;
+
+err_deinit_isr:
+ idt_deinit_isr(ndev);
+err_deinit_link:
+ idt_deinit_link(ndev);
+ idt_deinit_pci(ndev);
+
+ return ret;
+}
+
+/*
+ * idt_pci_probe() - PCI device remove callback
+ * @pdev: Pointer to PCI device structure
+ */
+static void idt_pci_remove(struct pci_dev *pdev)
+{
+ struct idt_ntb_dev *ndev = pci_get_drvdata(pdev);
+
+ /* Deinit the DebugFS node */
+ idt_deinit_dbgfs(ndev);
+
+ /* Unregister NTB device */
+ idt_unregister_device(ndev);
+
+ /* Stop the interrupts handling */
+ idt_deinit_isr(ndev);
+
+ /* Deinitialize link event subsystem */
+ idt_deinit_link(ndev);
+
+ /* Deinit basic PCI subsystem */
+ idt_deinit_pci(ndev);
+
+ /* IDT PCIe-switch NTB driver is finally initialized */
+ dev_info(&pdev->dev, "IDT NTB device is removed");
+
+ /* Sayonara... */
+}
+
+/*
+ * IDT PCIe-switch models ports configuration structures
+ */
+static struct idt_89hpes_cfg idt_89hpes24nt6ag2_config = {
+ .name = "89HPES24NT6AG2",
+ .port_cnt = 6, .ports = {0, 2, 4, 6, 8, 12}
+};
+static struct idt_89hpes_cfg idt_89hpes32nt8ag2_config = {
+ .name = "89HPES32NT8AG2",
+ .port_cnt = 8, .ports = {0, 2, 4, 6, 8, 12, 16, 20}
+};
+static struct idt_89hpes_cfg idt_89hpes32nt8bg2_config = {
+ .name = "89HPES32NT8BG2",
+ .port_cnt = 8, .ports = {0, 2, 4, 6, 8, 12, 16, 20}
+};
+static struct idt_89hpes_cfg idt_89hpes12nt12g2_config = {
+ .name = "89HPES12NT12G2",
+ .port_cnt = 3, .ports = {0, 8, 16}
+};
+static struct idt_89hpes_cfg idt_89hpes16nt16g2_config = {
+ .name = "89HPES16NT16G2",
+ .port_cnt = 4, .ports = {0, 8, 12, 16}
+};
+static struct idt_89hpes_cfg idt_89hpes24nt24g2_config = {
+ .name = "89HPES24NT24G2",
+ .port_cnt = 8, .ports = {0, 2, 4, 6, 8, 12, 16, 20}
+};
+static struct idt_89hpes_cfg idt_89hpes32nt24ag2_config = {
+ .name = "89HPES32NT24AG2",
+ .port_cnt = 8, .ports = {0, 2, 4, 6, 8, 12, 16, 20}
+};
+static struct idt_89hpes_cfg idt_89hpes32nt24bg2_config = {
+ .name = "89HPES32NT24BG2",
+ .port_cnt = 8, .ports = {0, 2, 4, 6, 8, 12, 16, 20}
+};
+
+/*
+ * PCI-ids table of the supported IDT PCIe-switch devices
+ */
+static const struct pci_device_id idt_pci_tbl[] = {
+ {IDT_PCI_DEVICE_IDS(89HPES24NT6AG2, idt_89hpes24nt6ag2_config)},
+ {IDT_PCI_DEVICE_IDS(89HPES32NT8AG2, idt_89hpes32nt8ag2_config)},
+ {IDT_PCI_DEVICE_IDS(89HPES32NT8BG2, idt_89hpes32nt8bg2_config)},
+ {IDT_PCI_DEVICE_IDS(89HPES12NT12G2, idt_89hpes12nt12g2_config)},
+ {IDT_PCI_DEVICE_IDS(89HPES16NT16G2, idt_89hpes16nt16g2_config)},
+ {IDT_PCI_DEVICE_IDS(89HPES24NT24G2, idt_89hpes24nt24g2_config)},
+ {IDT_PCI_DEVICE_IDS(89HPES32NT24AG2, idt_89hpes32nt24ag2_config)},
+ {IDT_PCI_DEVICE_IDS(89HPES32NT24BG2, idt_89hpes32nt24bg2_config)},
+ {0}
+};
+MODULE_DEVICE_TABLE(pci, idt_pci_tbl);
+
+/*
+ * IDT PCIe-switch NT-function device driver structure definition
+ */
+static struct pci_driver idt_pci_driver = {
+ .name = KBUILD_MODNAME,
+ .probe = idt_pci_probe,
+ .remove = idt_pci_remove,
+ .id_table = idt_pci_tbl,
+};
+
+static int __init idt_pci_driver_init(void)
+{
+ pr_info("%s %s\n", NTB_DESC, NTB_VER);
+
+ /* Create the top DebugFS directory if the FS is initialized */
+ if (debugfs_initialized())
+ dbgfs_topdir = debugfs_create_dir(KBUILD_MODNAME, NULL);
+
+ /* Register the NTB hardware driver to handle the PCI device */
+ return pci_register_driver(&idt_pci_driver);
+}
+module_init(idt_pci_driver_init);
+
+static void __exit idt_pci_driver_exit(void)
+{
+ /* Unregister the NTB hardware driver */
+ pci_unregister_driver(&idt_pci_driver);
+
+ /* Discard the top DebugFS directory */
+ debugfs_remove_recursive(dbgfs_topdir);
+}
+module_exit(idt_pci_driver_exit);
+
diff --git a/drivers/ntb/hw/idt/ntb_hw_idt.h b/drivers/ntb/hw/idt/ntb_hw_idt.h
new file mode 100644
index 0000000..856fd18
--- /dev/null
+++ b/drivers/ntb/hw/idt/ntb_hw_idt.h
@@ -0,0 +1,1149 @@
+/*
+ * This file is provided under a GPLv2 license. When using or
+ * redistributing this file, you may do so under that license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright (C) 2016 T-Platforms All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+ * Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, one can be found http://www.gnu.org/licenses/.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * IDT PCIe-switch NTB Linux driver
+ *
+ * Contact Information:
+ * Serge Semin <fancer.lancer@gmail.com>, <Sergey.Semin@t-platforms.ru>
+ */
+
+#ifndef NTB_HW_IDT_H
+#define NTB_HW_IDT_H
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/ntb.h>
+
+
+/*
+ * Macro is used to create the struct pci_device_id that matches
+ * the supported IDT PCIe-switches
+ * @devname: Capitalized name of the particular device
+ * @data: Variable passed to the driver of the particular device
+ */
+#define IDT_PCI_DEVICE_IDS(devname, data) \
+ .vendor = PCI_VENDOR_ID_IDT, .device = PCI_DEVICE_ID_IDT_##devname, \
+ .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, \
+ .class = (PCI_CLASS_BRIDGE_OTHER << 8), .class_mask = (0xFFFF00), \
+ .driver_data = (kernel_ulong_t)&data
+
+/*
+ * IDT PCIe-switches device IDs
+ */
+#define PCI_DEVICE_ID_IDT_89HPES24NT6AG2 0x8091
+#define PCI_DEVICE_ID_IDT_89HPES32NT8AG2 0x808F
+#define PCI_DEVICE_ID_IDT_89HPES32NT8BG2 0x8088
+#define PCI_DEVICE_ID_IDT_89HPES12NT12G2 0x8092
+#define PCI_DEVICE_ID_IDT_89HPES16NT16G2 0x8090
+#define PCI_DEVICE_ID_IDT_89HPES24NT24G2 0x808E
+#define PCI_DEVICE_ID_IDT_89HPES32NT24AG2 0x808C
+#define PCI_DEVICE_ID_IDT_89HPES32NT24BG2 0x808A
+
+/*
+ * NT-function Configuration Space registers
+ * NOTE 1) The IDT PCIe-switch internal data is little-endian
+ * so it must be taken into account in the driver
+ * internals.
+ * 2) Additionally the registers should be accessed either
+ * with byte-enables corresponding to their native size or
+ * the size of one DWORD
+ *
+ * So to simplify the driver code, there is only DWORD-sized read/write
+ * operations utilized.
+ */
+/* PCI Express Configuration Space */
+/* PCI Express command/status register (DWORD) */
+#define IDT_NT_PCICMDSTS 0x00004U
+/* PCI Express Device Capabilities (DWORD) */
+#define IDT_NT_PCIEDCAP 0x00044U
+/* PCI Express Device Control/Status (WORD+WORD) */
+#define IDT_NT_PCIEDCTLSTS 0x00048U
+/* PCI Express Link Capabilities (DWORD) */
+#define IDT_NT_PCIELCAP 0x0004CU
+/* PCI Express Link Control/Status (WORD+WORD) */
+#define IDT_NT_PCIELCTLSTS 0x00050U
+/* PCI Express Device Capabilities 2 (DWORD) */
+#define IDT_NT_PCIEDCAP2 0x00064U
+/* PCI Express Device Control 2 (WORD+WORD) */
+#define IDT_NT_PCIEDCTL2 0x00068U
+/* PCI Power Management Control and Status (DWORD) */
+#define IDT_NT_PMCSR 0x000C4U
+/*==========================================*/
+/* IDT Proprietary NT-port-specific registers */
+/* NT-function main control registers */
+/* NT Endpoint Control (DWORD) */
+#define IDT_NT_NTCTL 0x00400U
+/* NT Endpoint Interrupt Status/Mask (DWORD) */
+#define IDT_NT_NTINTSTS 0x00404U
+#define IDT_NT_NTINTMSK 0x00408U
+/* NT Endpoint Signal Data (DWORD) */
+#define IDT_NT_NTSDATA 0x0040CU
+/* NT Endpoint Global Signal (DWORD) */
+#define IDT_NT_NTGSIGNAL 0x00410U
+/* Internal Error Reporting Mask 0/1 (DWORD) */
+#define IDT_NT_NTIERRORMSK0 0x00414U
+#define IDT_NT_NTIERRORMSK1 0x00418U
+/* Doorbel registers */
+/* NT Outbound Doorbell Set (DWORD) */
+#define IDT_NT_OUTDBELLSET 0x00420U
+/* NT Inbound Doorbell Status/Mask (DWORD) */
+#define IDT_NT_INDBELLSTS 0x00428U
+#define IDT_NT_INDBELLMSK 0x0042CU
+/* Message registers */
+/* Outbound Message N (DWORD) */
+#define IDT_NT_OUTMSG0 0x00430U
+#define IDT_NT_OUTMSG1 0x00434U
+#define IDT_NT_OUTMSG2 0x00438U
+#define IDT_NT_OUTMSG3 0x0043CU
+/* Inbound Message N (DWORD) */
+#define IDT_NT_INMSG0 0x00440U
+#define IDT_NT_INMSG1 0x00444U
+#define IDT_NT_INMSG2 0x00448U
+#define IDT_NT_INMSG3 0x0044CU
+/* Inbound Message Source N (DWORD) */
+#define IDT_NT_INMSGSRC0 0x00450U
+#define IDT_NT_INMSGSRC1 0x00454U
+#define IDT_NT_INMSGSRC2 0x00458U
+#define IDT_NT_INMSGSRC3 0x0045CU
+/* Message Status (DWORD) */
+#define IDT_NT_MSGSTS 0x00460U
+/* Message Status Mask (DWORD) */
+#define IDT_NT_MSGSTSMSK 0x00464U
+/* BAR-setup registers */
+/* BAR N Setup/Limit Address/Lower and Upper Translated Base Address (DWORD) */
+#define IDT_NT_BARSETUP0 0x00470U
+#define IDT_NT_BARLIMIT0 0x00474U
+#define IDT_NT_BARLTBASE0 0x00478U
+#define IDT_NT_BARUTBASE0 0x0047CU
+#define IDT_NT_BARSETUP1 0x00480U
+#define IDT_NT_BARLIMIT1 0x00484U
+#define IDT_NT_BARLTBASE1 0x00488U
+#define IDT_NT_BARUTBASE1 0x0048CU
+#define IDT_NT_BARSETUP2 0x00490U
+#define IDT_NT_BARLIMIT2 0x00494U
+#define IDT_NT_BARLTBASE2 0x00498U
+#define IDT_NT_BARUTBASE2 0x0049CU
+#define IDT_NT_BARSETUP3 0x004A0U
+#define IDT_NT_BARLIMIT3 0x004A4U
+#define IDT_NT_BARLTBASE3 0x004A8U
+#define IDT_NT_BARUTBASE3 0x004ACU
+#define IDT_NT_BARSETUP4 0x004B0U
+#define IDT_NT_BARLIMIT4 0x004B4U
+#define IDT_NT_BARLTBASE4 0x004B8U
+#define IDT_NT_BARUTBASE4 0x004BCU
+#define IDT_NT_BARSETUP5 0x004C0U
+#define IDT_NT_BARLIMIT5 0x004C4U
+#define IDT_NT_BARLTBASE5 0x004C8U
+#define IDT_NT_BARUTBASE5 0x004CCU
+/* NT mapping table registers */
+/* NT Mapping Table Address/Status/Data (DWORD) */
+#define IDT_NT_NTMTBLADDR 0x004D0U
+#define IDT_NT_NTMTBLSTS 0x004D4U
+#define IDT_NT_NTMTBLDATA 0x004D8U
+/* Requester ID (Bus:Device:Function) Capture (DWORD) */
+#define IDT_NT_REQIDCAP 0x004DCU
+/* Memory Windows Lookup table registers */
+/* Lookup Table Offset/Lower, Middle and Upper data (DWORD) */
+#define IDT_NT_LUTOFFSET 0x004E0U
+#define IDT_NT_LUTLDATA 0x004E4U
+#define IDT_NT_LUTMDATA 0x004E8U
+#define IDT_NT_LUTUDATA 0x004ECU
+/* NT Endpoint Uncorrectable/Correctable Errors Emulation registers (DWORD) */
+#define IDT_NT_NTUEEM 0x004F0U
+#define IDT_NT_NTCEEM 0x004F4U
+/* Global Address Space Access/Data registers (DWARD) */
+#define IDT_NT_GASAADDR 0x00FF8U
+#define IDT_NT_GASADATA 0x00FFCU
+
+/*
+ * IDT PCIe-switch Global Configuration and Status registers
+ */
+/* Port N Configuration register in global space */
+/* PCI Express command/status and link control/status registers (WORD+WORD) */
+#define IDT_SW_NTP0_PCIECMDSTS 0x01004U
+#define IDT_SW_NTP0_PCIELCTLSTS 0x01050U
+/* NT-function control register (DWORD) */
+#define IDT_SW_NTP0_NTCTL 0x01400U
+/* BAR setup/limit/base address registers (DWORD) */
+#define IDT_SW_NTP0_BARSETUP0 0x01470U
+#define IDT_SW_NTP0_BARLIMIT0 0x01474U
+#define IDT_SW_NTP0_BARLTBASE0 0x01478U
+#define IDT_SW_NTP0_BARUTBASE0 0x0147CU
+#define IDT_SW_NTP0_BARSETUP1 0x01480U
+#define IDT_SW_NTP0_BARLIMIT1 0x01484U
+#define IDT_SW_NTP0_BARLTBASE1 0x01488U
+#define IDT_SW_NTP0_BARUTBASE1 0x0148CU
+#define IDT_SW_NTP0_BARSETUP2 0x01490U
+#define IDT_SW_NTP0_BARLIMIT2 0x01494U
+#define IDT_SW_NTP0_BARLTBASE2 0x01498U
+#define IDT_SW_NTP0_BARUTBASE2 0x0149CU
+#define IDT_SW_NTP0_BARSETUP3 0x014A0U
+#define IDT_SW_NTP0_BARLIMIT3 0x014A4U
+#define IDT_SW_NTP0_BARLTBASE3 0x014A8U
+#define IDT_SW_NTP0_BARUTBASE3 0x014ACU
+#define IDT_SW_NTP0_BARSETUP4 0x014B0U
+#define IDT_SW_NTP0_BARLIMIT4 0x014B4U
+#define IDT_SW_NTP0_BARLTBASE4 0x014B8U
+#define IDT_SW_NTP0_BARUTBASE4 0x014BCU
+#define IDT_SW_NTP0_BARSETUP5 0x014C0U
+#define IDT_SW_NTP0_BARLIMIT5 0x014C4U
+#define IDT_SW_NTP0_BARLTBASE5 0x014C8U
+#define IDT_SW_NTP0_BARUTBASE5 0x014CCU
+/* PCI Express command/status and link control/status registers (WORD+WORD) */
+#define IDT_SW_NTP2_PCIECMDSTS 0x05004U
+#define IDT_SW_NTP2_PCIELCTLSTS 0x05050U
+/* NT-function control register (DWORD) */
+#define IDT_SW_NTP2_NTCTL 0x05400U
+/* BAR setup/limit/base address registers (DWORD) */
+#define IDT_SW_NTP2_BARSETUP0 0x05470U
+#define IDT_SW_NTP2_BARLIMIT0 0x05474U
+#define IDT_SW_NTP2_BARLTBASE0 0x05478U
+#define IDT_SW_NTP2_BARUTBASE0 0x0547CU
+#define IDT_SW_NTP2_BARSETUP1 0x05480U
+#define IDT_SW_NTP2_BARLIMIT1 0x05484U
+#define IDT_SW_NTP2_BARLTBASE1 0x05488U
+#define IDT_SW_NTP2_BARUTBASE1 0x0548CU
+#define IDT_SW_NTP2_BARSETUP2 0x05490U
+#define IDT_SW_NTP2_BARLIMIT2 0x05494U
+#define IDT_SW_NTP2_BARLTBASE2 0x05498U
+#define IDT_SW_NTP2_BARUTBASE2 0x0549CU
+#define IDT_SW_NTP2_BARSETUP3 0x054A0U
+#define IDT_SW_NTP2_BARLIMIT3 0x054A4U
+#define IDT_SW_NTP2_BARLTBASE3 0x054A8U
+#define IDT_SW_NTP2_BARUTBASE3 0x054ACU
+#define IDT_SW_NTP2_BARSETUP4 0x054B0U
+#define IDT_SW_NTP2_BARLIMIT4 0x054B4U
+#define IDT_SW_NTP2_BARLTBASE4 0x054B8U
+#define IDT_SW_NTP2_BARUTBASE4 0x054BCU
+#define IDT_SW_NTP2_BARSETUP5 0x054C0U
+#define IDT_SW_NTP2_BARLIMIT5 0x054C4U
+#define IDT_SW_NTP2_BARLTBASE5 0x054C8U
+#define IDT_SW_NTP2_BARUTBASE5 0x054CCU
+/* PCI Express command/status and link control/status registers (WORD+WORD) */
+#define IDT_SW_NTP4_PCIECMDSTS 0x09004U
+#define IDT_SW_NTP4_PCIELCTLSTS 0x09050U
+/* NT-function control register (DWORD) */
+#define IDT_SW_NTP4_NTCTL 0x09400U
+/* BAR setup/limit/base address registers (DWORD) */
+#define IDT_SW_NTP4_BARSETUP0 0x09470U
+#define IDT_SW_NTP4_BARLIMIT0 0x09474U
+#define IDT_SW_NTP4_BARLTBASE0 0x09478U
+#define IDT_SW_NTP4_BARUTBASE0 0x0947CU
+#define IDT_SW_NTP4_BARSETUP1 0x09480U
+#define IDT_SW_NTP4_BARLIMIT1 0x09484U
+#define IDT_SW_NTP4_BARLTBASE1 0x09488U
+#define IDT_SW_NTP4_BARUTBASE1 0x0948CU
+#define IDT_SW_NTP4_BARSETUP2 0x09490U
+#define IDT_SW_NTP4_BARLIMIT2 0x09494U
+#define IDT_SW_NTP4_BARLTBASE2 0x09498U
+#define IDT_SW_NTP4_BARUTBASE2 0x0949CU
+#define IDT_SW_NTP4_BARSETUP3 0x094A0U
+#define IDT_SW_NTP4_BARLIMIT3 0x094A4U
+#define IDT_SW_NTP4_BARLTBASE3 0x094A8U
+#define IDT_SW_NTP4_BARUTBASE3 0x094ACU
+#define IDT_SW_NTP4_BARSETUP4 0x094B0U
+#define IDT_SW_NTP4_BARLIMIT4 0x094B4U
+#define IDT_SW_NTP4_BARLTBASE4 0x094B8U
+#define IDT_SW_NTP4_BARUTBASE4 0x094BCU
+#define IDT_SW_NTP4_BARSETUP5 0x094C0U
+#define IDT_SW_NTP4_BARLIMIT5 0x094C4U
+#define IDT_SW_NTP4_BARLTBASE5 0x094C8U
+#define IDT_SW_NTP4_BARUTBASE5 0x094CCU
+/* PCI Express command/status and link control/status registers (WORD+WORD) */
+#define IDT_SW_NTP6_PCIECMDSTS 0x0D004U
+#define IDT_SW_NTP6_PCIELCTLSTS 0x0D050U
+/* NT-function control register (DWORD) */
+#define IDT_SW_NTP6_NTCTL 0x0D400U
+/* BAR setup/limit/base address registers (DWORD) */
+#define IDT_SW_NTP6_BARSETUP0 0x0D470U
+#define IDT_SW_NTP6_BARLIMIT0 0x0D474U
+#define IDT_SW_NTP6_BARLTBASE0 0x0D478U
+#define IDT_SW_NTP6_BARUTBASE0 0x0D47CU
+#define IDT_SW_NTP6_BARSETUP1 0x0D480U
+#define IDT_SW_NTP6_BARLIMIT1 0x0D484U
+#define IDT_SW_NTP6_BARLTBASE1 0x0D488U
+#define IDT_SW_NTP6_BARUTBASE1 0x0D48CU
+#define IDT_SW_NTP6_BARSETUP2 0x0D490U
+#define IDT_SW_NTP6_BARLIMIT2 0x0D494U
+#define IDT_SW_NTP6_BARLTBASE2 0x0D498U
+#define IDT_SW_NTP6_BARUTBASE2 0x0D49CU
+#define IDT_SW_NTP6_BARSETUP3 0x0D4A0U
+#define IDT_SW_NTP6_BARLIMIT3 0x0D4A4U
+#define IDT_SW_NTP6_BARLTBASE3 0x0D4A8U
+#define IDT_SW_NTP6_BARUTBASE3 0x0D4ACU
+#define IDT_SW_NTP6_BARSETUP4 0x0D4B0U
+#define IDT_SW_NTP6_BARLIMIT4 0x0D4B4U
+#define IDT_SW_NTP6_BARLTBASE4 0x0D4B8U
+#define IDT_SW_NTP6_BARUTBASE4 0x0D4BCU
+#define IDT_SW_NTP6_BARSETUP5 0x0D4C0U
+#define IDT_SW_NTP6_BARLIMIT5 0x0D4C4U
+#define IDT_SW_NTP6_BARLTBASE5 0x0D4C8U
+#define IDT_SW_NTP6_BARUTBASE5 0x0D4CCU
+/* PCI Express command/status and link control/status registers (WORD+WORD) */
+#define IDT_SW_NTP8_PCIECMDSTS 0x11004U
+#define IDT_SW_NTP8_PCIELCTLSTS 0x11050U
+/* NT-function control register (DWORD) */
+#define IDT_SW_NTP8_NTCTL 0x11400U
+/* BAR setup/limit/base address registers (DWORD) */
+#define IDT_SW_NTP8_BARSETUP0 0x11470U
+#define IDT_SW_NTP8_BARLIMIT0 0x11474U
+#define IDT_SW_NTP8_BARLTBASE0 0x11478U
+#define IDT_SW_NTP8_BARUTBASE0 0x1147CU
+#define IDT_SW_NTP8_BARSETUP1 0x11480U
+#define IDT_SW_NTP8_BARLIMIT1 0x11484U
+#define IDT_SW_NTP8_BARLTBASE1 0x11488U
+#define IDT_SW_NTP8_BARUTBASE1 0x1148CU
+#define IDT_SW_NTP8_BARSETUP2 0x11490U
+#define IDT_SW_NTP8_BARLIMIT2 0x11494U
+#define IDT_SW_NTP8_BARLTBASE2 0x11498U
+#define IDT_SW_NTP8_BARUTBASE2 0x1149CU
+#define IDT_SW_NTP8_BARSETUP3 0x114A0U
+#define IDT_SW_NTP8_BARLIMIT3 0x114A4U
+#define IDT_SW_NTP8_BARLTBASE3 0x114A8U
+#define IDT_SW_NTP8_BARUTBASE3 0x114ACU
+#define IDT_SW_NTP8_BARSETUP4 0x114B0U
+#define IDT_SW_NTP8_BARLIMIT4 0x114B4U
+#define IDT_SW_NTP8_BARLTBASE4 0x114B8U
+#define IDT_SW_NTP8_BARUTBASE4 0x114BCU
+#define IDT_SW_NTP8_BARSETUP5 0x114C0U
+#define IDT_SW_NTP8_BARLIMIT5 0x114C4U
+#define IDT_SW_NTP8_BARLTBASE5 0x114C8U
+#define IDT_SW_NTP8_BARUTBASE5 0x114CCU
+/* PCI Express command/status and link control/status registers (WORD+WORD) */
+#define IDT_SW_NTP12_PCIECMDSTS 0x19004U
+#define IDT_SW_NTP12_PCIELCTLSTS 0x19050U
+/* NT-function control register (DWORD) */
+#define IDT_SW_NTP12_NTCTL 0x19400U
+/* BAR setup/limit/base address registers (DWORD) */
+#define IDT_SW_NTP12_BARSETUP0 0x19470U
+#define IDT_SW_NTP12_BARLIMIT0 0x19474U
+#define IDT_SW_NTP12_BARLTBASE0 0x19478U
+#define IDT_SW_NTP12_BARUTBASE0 0x1947CU
+#define IDT_SW_NTP12_BARSETUP1 0x19480U
+#define IDT_SW_NTP12_BARLIMIT1 0x19484U
+#define IDT_SW_NTP12_BARLTBASE1 0x19488U
+#define IDT_SW_NTP12_BARUTBASE1 0x1948CU
+#define IDT_SW_NTP12_BARSETUP2 0x19490U
+#define IDT_SW_NTP12_BARLIMIT2 0x19494U
+#define IDT_SW_NTP12_BARLTBASE2 0x19498U
+#define IDT_SW_NTP12_BARUTBASE2 0x1949CU
+#define IDT_SW_NTP12_BARSETUP3 0x194A0U
+#define IDT_SW_NTP12_BARLIMIT3 0x194A4U
+#define IDT_SW_NTP12_BARLTBASE3 0x194A8U
+#define IDT_SW_NTP12_BARUTBASE3 0x194ACU
+#define IDT_SW_NTP12_BARSETUP4 0x194B0U
+#define IDT_SW_NTP12_BARLIMIT4 0x194B4U
+#define IDT_SW_NTP12_BARLTBASE4 0x194B8U
+#define IDT_SW_NTP12_BARUTBASE4 0x194BCU
+#define IDT_SW_NTP12_BARSETUP5 0x194C0U
+#define IDT_SW_NTP12_BARLIMIT5 0x194C4U
+#define IDT_SW_NTP12_BARLTBASE5 0x194C8U
+#define IDT_SW_NTP12_BARUTBASE5 0x194CCU
+/* PCI Express command/status and link control/status registers (WORD+WORD) */
+#define IDT_SW_NTP16_PCIECMDSTS 0x21004U
+#define IDT_SW_NTP16_PCIELCTLSTS 0x21050U
+/* NT-function control register (DWORD) */
+#define IDT_SW_NTP16_NTCTL 0x21400U
+/* BAR setup/limit/base address registers (DWORD) */
+#define IDT_SW_NTP16_BARSETUP0 0x21470U
+#define IDT_SW_NTP16_BARLIMIT0 0x21474U
+#define IDT_SW_NTP16_BARLTBASE0 0x21478U
+#define IDT_SW_NTP16_BARUTBASE0 0x2147CU
+#define IDT_SW_NTP16_BARSETUP1 0x21480U
+#define IDT_SW_NTP16_BARLIMIT1 0x21484U
+#define IDT_SW_NTP16_BARLTBASE1 0x21488U
+#define IDT_SW_NTP16_BARUTBASE1 0x2148CU
+#define IDT_SW_NTP16_BARSETUP2 0x21490U
+#define IDT_SW_NTP16_BARLIMIT2 0x21494U
+#define IDT_SW_NTP16_BARLTBASE2 0x21498U
+#define IDT_SW_NTP16_BARUTBASE2 0x2149CU
+#define IDT_SW_NTP16_BARSETUP3 0x214A0U
+#define IDT_SW_NTP16_BARLIMIT3 0x214A4U
+#define IDT_SW_NTP16_BARLTBASE3 0x214A8U
+#define IDT_SW_NTP16_BARUTBASE3 0x214ACU
+#define IDT_SW_NTP16_BARSETUP4 0x214B0U
+#define IDT_SW_NTP16_BARLIMIT4 0x214B4U
+#define IDT_SW_NTP16_BARLTBASE4 0x214B8U
+#define IDT_SW_NTP16_BARUTBASE4 0x214BCU
+#define IDT_SW_NTP16_BARSETUP5 0x214C0U
+#define IDT_SW_NTP16_BARLIMIT5 0x214C4U
+#define IDT_SW_NTP16_BARLTBASE5 0x214C8U
+#define IDT_SW_NTP16_BARUTBASE5 0x214CCU
+/* PCI Express command/status and link control/status registers (WORD+WORD) */
+#define IDT_SW_NTP20_PCIECMDSTS 0x29004U
+#define IDT_SW_NTP20_PCIELCTLSTS 0x29050U
+/* NT-function control register (DWORD) */
+#define IDT_SW_NTP20_NTCTL 0x29400U
+/* BAR setup/limit/base address registers (DWORD) */
+#define IDT_SW_NTP20_BARSETUP0 0x29470U
+#define IDT_SW_NTP20_BARLIMIT0 0x29474U
+#define IDT_SW_NTP20_BARLTBASE0 0x29478U
+#define IDT_SW_NTP20_BARUTBASE0 0x2947CU
+#define IDT_SW_NTP20_BARSETUP1 0x29480U
+#define IDT_SW_NTP20_BARLIMIT1 0x29484U
+#define IDT_SW_NTP20_BARLTBASE1 0x29488U
+#define IDT_SW_NTP20_BARUTBASE1 0x2948CU
+#define IDT_SW_NTP20_BARSETUP2 0x29490U
+#define IDT_SW_NTP20_BARLIMIT2 0x29494U
+#define IDT_SW_NTP20_BARLTBASE2 0x29498U
+#define IDT_SW_NTP20_BARUTBASE2 0x2949CU
+#define IDT_SW_NTP20_BARSETUP3 0x294A0U
+#define IDT_SW_NTP20_BARLIMIT3 0x294A4U
+#define IDT_SW_NTP20_BARLTBASE3 0x294A8U
+#define IDT_SW_NTP20_BARUTBASE3 0x294ACU
+#define IDT_SW_NTP20_BARSETUP4 0x294B0U
+#define IDT_SW_NTP20_BARLIMIT4 0x294B4U
+#define IDT_SW_NTP20_BARLTBASE4 0x294B8U
+#define IDT_SW_NTP20_BARUTBASE4 0x294BCU
+#define IDT_SW_NTP20_BARSETUP5 0x294C0U
+#define IDT_SW_NTP20_BARLIMIT5 0x294C4U
+#define IDT_SW_NTP20_BARLTBASE5 0x294C8U
+#define IDT_SW_NTP20_BARUTBASE5 0x294CCU
+/* IDT PCIe-switch control register (DWORD) */
+#define IDT_SW_CTL 0x3E000U
+/* Boot Configuration Vector Status (DWORD) */
+#define IDT_SW_BCVSTS 0x3E004U
+/* Port Clocking Mode (DWORD) */
+#define IDT_SW_PCLKMODE 0x3E008U
+/* Reset Drain Delay (DWORD) */
+#define IDT_SW_RDRAINDELAY 0x3E080U
+/* Port Operating Mode Change Drain Delay (DWORD) */
+#define IDT_SW_POMCDELAY 0x3E084U
+/* Side Effect Delay (DWORD) */
+#define IDT_SW_SEDELAY 0x3E088U
+/* Upstream Secondary Bus Reset Delay (DWORD) */
+#define IDT_SW_SSBRDELAY 0x3E08CU
+/* Switch partition N Control/Status/Failover registers */
+#define IDT_SW_SWPART0CTL 0x3E100U
+#define IDT_SW_SWPART0STS 0x3E104U
+#define IDT_SW_SWPART0FCTL 0x3E108U
+#define IDT_SW_SWPART1CTL 0x3E120U
+#define IDT_SW_SWPART1STS 0x3E124U
+#define IDT_SW_SWPART1FCTL 0x3E128U
+#define IDT_SW_SWPART2CTL 0x3E140U
+#define IDT_SW_SWPART2STS 0x3E144U
+#define IDT_SW_SWPART2FCTL 0x3E148U
+#define IDT_SW_SWPART3CTL 0x3E160U
+#define IDT_SW_SWPART3STS 0x3E164U
+#define IDT_SW_SWPART3FCTL 0x3E168U
+#define IDT_SW_SWPART4CTL 0x3E180U
+#define IDT_SW_SWPART4STS 0x3E184U
+#define IDT_SW_SWPART4FCTL 0x3E188U
+#define IDT_SW_SWPART5CTL 0x3E1A0U
+#define IDT_SW_SWPART5STS 0x3E1A4U
+#define IDT_SW_SWPART5FCTL 0x3E1A8U
+#define IDT_SW_SWPART6CTL 0x3E1C0U
+#define IDT_SW_SWPART6STS 0x3E1C4U
+#define IDT_SW_SWPART6FCTL 0x3E1C8U
+#define IDT_SW_SWPART7CTL 0x3E1E0U
+#define IDT_SW_SWPART7STS 0x3E1E4U
+#define IDT_SW_SWPART7FCTL 0x3E1E8U
+/* Switch port N control and status registers */
+#define IDT_SW_SWPORT0CTL 0x3E200U
+#define IDT_SW_SWPORT0STS 0x3E204U
+#define IDT_SW_SWPORT0FCTL 0x3E208U
+#define IDT_SW_SWPORT2CTL 0x3E240U
+#define IDT_SW_SWPORT2STS 0x3E244U
+#define IDT_SW_SWPORT2FCTL 0x3E248U
+#define IDT_SW_SWPORT4CTL 0x3E280U
+#define IDT_SW_SWPORT4STS 0x3E284U
+#define IDT_SW_SWPORT4FCTL 0x3E288U
+#define IDT_SW_SWPORT6CTL 0x3E2C0U
+#define IDT_SW_SWPORT6STS 0x3E2C4U
+#define IDT_SW_SWPORT6FCTL 0x3E2C8U
+#define IDT_SW_SWPORT8CTL 0x3E300U
+#define IDT_SW_SWPORT8STS 0x3E304U
+#define IDT_SW_SWPORT8FCTL 0x3E308U
+#define IDT_SW_SWPORT12CTL 0x3E380U
+#define IDT_SW_SWPORT12STS 0x3E384U
+#define IDT_SW_SWPORT12FCTL 0x3E388U
+#define IDT_SW_SWPORT16CTL 0x3E400U
+#define IDT_SW_SWPORT16STS 0x3E404U
+#define IDT_SW_SWPORT16FCTL 0x3E408U
+#define IDT_SW_SWPORT20CTL 0x3E480U
+#define IDT_SW_SWPORT20STS 0x3E484U
+#define IDT_SW_SWPORT20FCTL 0x3E488U
+/* Switch Event registers */
+/* Switch Event Status/Mask/Partition mask (DWORD) */
+#define IDT_SW_SESTS 0x3EC00U
+#define IDT_SW_SEMSK 0x3EC04U
+#define IDT_SW_SEPMSK 0x3EC08U
+/* Switch Event Link Up/Down Status/Mask (DWORD) */
+#define IDT_SW_SELINKUPSTS 0x3EC0CU
+#define IDT_SW_SELINKUPMSK 0x3EC10U
+#define IDT_SW_SELINKDNSTS 0x3EC14U
+#define IDT_SW_SELINKDNMSK 0x3EC18U
+/* Switch Event Fundamental Reset Status/Mask (DWORD) */
+#define IDT_SW_SEFRSTSTS 0x3EC1CU
+#define IDT_SW_SEFRSTMSK 0x3EC20U
+/* Switch Event Hot Reset Status/Mask (DWORD) */
+#define IDT_SW_SEHRSTSTS 0x3EC24U
+#define IDT_SW_SEHRSTMSK 0x3EC28U
+/* Switch Event Failover Mask (DWORD) */
+#define IDT_SW_SEFOVRMSK 0x3EC2CU
+/* Switch Event Global Signal Status/Mask (DWORD) */
+#define IDT_SW_SEGSIGSTS 0x3EC30U
+#define IDT_SW_SEGSIGMSK 0x3EC34U
+/* NT Global Doorbell Status (DWORD) */
+#define IDT_SW_GDBELLSTS 0x3EC3CU
+/* Switch partition N message M control (msgs routing table) (DWORD) */
+#define IDT_SW_SWP0MSGCTL0 0x3EE00U
+#define IDT_SW_SWP1MSGCTL0 0x3EE04U
+#define IDT_SW_SWP2MSGCTL0 0x3EE08U
+#define IDT_SW_SWP3MSGCTL0 0x3EE0CU
+#define IDT_SW_SWP4MSGCTL0 0x3EE10U
+#define IDT_SW_SWP5MSGCTL0 0x3EE14U
+#define IDT_SW_SWP6MSGCTL0 0x3EE18U
+#define IDT_SW_SWP7MSGCTL0 0x3EE1CU
+#define IDT_SW_SWP0MSGCTL1 0x3EE20U
+#define IDT_SW_SWP1MSGCTL1 0x3EE24U
+#define IDT_SW_SWP2MSGCTL1 0x3EE28U
+#define IDT_SW_SWP3MSGCTL1 0x3EE2CU
+#define IDT_SW_SWP4MSGCTL1 0x3EE30U
+#define IDT_SW_SWP5MSGCTL1 0x3EE34U
+#define IDT_SW_SWP6MSGCTL1 0x3EE38U
+#define IDT_SW_SWP7MSGCTL1 0x3EE3CU
+#define IDT_SW_SWP0MSGCTL2 0x3EE40U
+#define IDT_SW_SWP1MSGCTL2 0x3EE44U
+#define IDT_SW_SWP2MSGCTL2 0x3EE48U
+#define IDT_SW_SWP3MSGCTL2 0x3EE4CU
+#define IDT_SW_SWP4MSGCTL2 0x3EE50U
+#define IDT_SW_SWP5MSGCTL2 0x3EE54U
+#define IDT_SW_SWP6MSGCTL2 0x3EE58U
+#define IDT_SW_SWP7MSGCTL2 0x3EE5CU
+#define IDT_SW_SWP0MSGCTL3 0x3EE60U
+#define IDT_SW_SWP1MSGCTL3 0x3EE64U
+#define IDT_SW_SWP2MSGCTL3 0x3EE68U
+#define IDT_SW_SWP3MSGCTL3 0x3EE6CU
+#define IDT_SW_SWP4MSGCTL3 0x3EE70U
+#define IDT_SW_SWP5MSGCTL3 0x3EE74U
+#define IDT_SW_SWP6MSGCTL3 0x3EE78U
+#define IDT_SW_SWP7MSGCTL3 0x3EE7CU
+/* SMBus Status and Control registers (DWORD) */
+#define IDT_SW_SMBUSSTS 0x3F188U
+#define IDT_SW_SMBUSCTL 0x3F18CU
+/* Serial EEPROM Interface (DWORD) */
+#define IDT_SW_EEPROMINTF 0x3F190U
+/* MBus I/O Expander Address N (DWORD) */
+#define IDT_SW_IOEXPADDR0 0x3F198U
+#define IDT_SW_IOEXPADDR1 0x3F19CU
+#define IDT_SW_IOEXPADDR2 0x3F1A0U
+#define IDT_SW_IOEXPADDR3 0x3F1A4U
+#define IDT_SW_IOEXPADDR4 0x3F1A8U
+#define IDT_SW_IOEXPADDR5 0x3F1ACU
+/* General Purpose Events Control and Status registers (DWORD) */
+#define IDT_SW_GPECTL 0x3F1B0U
+#define IDT_SW_GPESTS 0x3F1B4U
+/* Temperature sensor Control/Status/Alarm/Adjustment/Slope registers */
+#define IDT_SW_TMPCTL 0x3F1D4U
+#define IDT_SW_TMPSTS 0x3F1D8U
+#define IDT_SW_TMPALARM 0x3F1DCU
+#define IDT_SW_TMPADJ 0x3F1E0U
+#define IDT_SW_TSSLOPE 0x3F1E4U
+/* SMBus Configuration Block header log (DWORD) */
+#define IDT_SW_SMBUSCBHL 0x3F1E8U
+
+/*
+ * Common registers related constants
+ * @IDT_REG_ALIGN: Registers alignment used in the driver
+ * @IDT_REG_PCI_MAX: Maximum PCI configuration space register value
+ * @IDT_REG_SW_MAX: Maximum global register value
+ */
+#define IDT_REG_ALIGN 4
+#define IDT_REG_PCI_MAX 0x00FFFU
+#define IDT_REG_SW_MAX 0x3FFFFU
+
+/*
+ * PCICMDSTS register fields related constants
+ * @IDT_PCICMDSTS_IOAE: I/O access enable
+ * @IDT_PCICMDSTS_MAE: Memory access enable
+ * @IDT_PCICMDSTS_BME: Bus master enable
+ */
+#define IDT_PCICMDSTS_IOAE 0x00000001U
+#define IDT_PCICMDSTS_MAE 0x00000002U
+#define IDT_PCICMDSTS_BME 0x00000004U
+
+/*
+ * PCIEDCAP register fields related constants
+ * @IDT_PCIEDCAP_MPAYLOAD_MASK: Maximum payload size mask
+ * @IDT_PCIEDCAP_MPAYLOAD_FLD: Maximum payload size field offset
+ * @IDT_PCIEDCAP_MPAYLOAD_S128: Max supported payload size of 128 bytes
+ * @IDT_PCIEDCAP_MPAYLOAD_S256: Max supported payload size of 256 bytes
+ * @IDT_PCIEDCAP_MPAYLOAD_S512: Max supported payload size of 512 bytes
+ * @IDT_PCIEDCAP_MPAYLOAD_S1024: Max supported payload size of 1024 bytes
+ * @IDT_PCIEDCAP_MPAYLOAD_S2048: Max supported payload size of 2048 bytes
+ */
+#define IDT_PCIEDCAP_MPAYLOAD_MASK 0x00000007U
+#define IDT_PCIEDCAP_MPAYLOAD_FLD 0
+#define IDT_PCIEDCAP_MPAYLOAD_S128 0x00000000U
+#define IDT_PCIEDCAP_MPAYLOAD_S256 0x00000001U
+#define IDT_PCIEDCAP_MPAYLOAD_S512 0x00000002U
+#define IDT_PCIEDCAP_MPAYLOAD_S1024 0x00000003U
+#define IDT_PCIEDCAP_MPAYLOAD_S2048 0x00000004U
+
+/*
+ * PCIEDCTLSTS registers fields related constants
+ * @IDT_PCIEDCTL_MPS_MASK: Maximum payload size mask
+ * @IDT_PCIEDCTL_MPS_FLD: MPS field offset
+ * @IDT_PCIEDCTL_MPS_S128: Max payload size of 128 bytes
+ * @IDT_PCIEDCTL_MPS_S256: Max payload size of 256 bytes
+ * @IDT_PCIEDCTL_MPS_S512: Max payload size of 512 bytes
+ * @IDT_PCIEDCTL_MPS_S1024: Max payload size of 1024 bytes
+ * @IDT_PCIEDCTL_MPS_S2048: Max payload size of 2048 bytes
+ * @IDT_PCIEDCTL_MPS_S4096: Max payload size of 4096 bytes
+ */
+#define IDT_PCIEDCTLSTS_MPS_MASK 0x000000E0U
+#define IDT_PCIEDCTLSTS_MPS_FLD 5
+#define IDT_PCIEDCTLSTS_MPS_S128 0x00000000U
+#define IDT_PCIEDCTLSTS_MPS_S256 0x00000020U
+#define IDT_PCIEDCTLSTS_MPS_S512 0x00000040U
+#define IDT_PCIEDCTLSTS_MPS_S1024 0x00000060U
+#define IDT_PCIEDCTLSTS_MPS_S2048 0x00000080U
+#define IDT_PCIEDCTLSTS_MPS_S4096 0x000000A0U
+
+/*
+ * PCIELCAP register fields related constants
+ * @IDT_PCIELCAP_PORTNUM_MASK: Port number field mask
+ * @IDT_PCIELCAP_PORTNUM_FLD: Port number field offset
+ */
+#define IDT_PCIELCAP_PORTNUM_MASK 0xFF000000U
+#define IDT_PCIELCAP_PORTNUM_FLD 24
+
+/*
+ * PCIELCTLSTS registers fields related constants
+ * @IDT_PCIELSTS_CLS_MASK: Current link speed mask
+ * @IDT_PCIELSTS_CLS_FLD: Current link speed field offset
+ * @IDT_PCIELSTS_NLW_MASK: Negotiated link width mask
+ * @IDT_PCIELSTS_NLW_FLD: Negotiated link width field offset
+ * @IDT_PCIELSTS_SCLK_COM: Common slot clock configuration
+ */
+#define IDT_PCIELCTLSTS_CLS_MASK 0x000F0000U
+#define IDT_PCIELCTLSTS_CLS_FLD 16
+#define IDT_PCIELCTLSTS_NLW_MASK 0x03F00000U
+#define IDT_PCIELCTLSTS_NLW_FLD 20
+#define IDT_PCIELCTLSTS_SCLK_COM 0x10000000U
+
+/*
+ * NTCTL register fields related constants
+ * @IDT_NTCTL_IDPROTDIS: ID Protection check disable (disable MTBL)
+ * @IDT_NTCTL_CPEN: Completion enable
+ * @IDT_NTCTL_RNS: Request no snoop processing (if MTBL disabled)
+ * @IDT_NTCTL_ATP: Address type processing (if MTBL disabled)
+ */
+#define IDT_NTCTL_IDPROTDIS 0x00000001U
+#define IDT_NTCTL_CPEN 0x00000002U
+#define IDT_NTCTL_RNS 0x00000004U
+#define IDT_NTCTL_ATP 0x00000008U
+
+/*
+ * NTINTSTS register fields related constants
+ * @IDT_NTINTSTS_MSG: Message interrupt bit
+ * @IDT_NTINTSTS_DBELL: Doorbell interrupt bit
+ * @IDT_NTINTSTS_SEVENT: Switch Event interrupt bit
+ * @IDT_NTINTSTS_TMPSENSOR: Temperature sensor interrupt bit
+ */
+#define IDT_NTINTSTS_MSG 0x00000001U
+#define IDT_NTINTSTS_DBELL 0x00000002U
+#define IDT_NTINTSTS_SEVENT 0x00000008U
+#define IDT_NTINTSTS_TMPSENSOR 0x00000080U
+
+/*
+ * NTINTMSK register fields related constants
+ * @IDT_NTINTMSK_MSG: Message interrupt mask bit
+ * @IDT_NTINTMSK_DBELL: Doorbell interrupt mask bit
+ * @IDT_NTINTMSK_SEVENT: Switch Event interrupt mask bit
+ * @IDT_NTINTMSK_TMPSENSOR: Temperature sensor interrupt mask bit
+ * @IDT_NTINTMSK_ALL: All the useful interrupts mask
+ */
+#define IDT_NTINTMSK_MSG 0x00000001U
+#define IDT_NTINTMSK_DBELL 0x00000002U
+#define IDT_NTINTMSK_SEVENT 0x00000008U
+#define IDT_NTINTMSK_TMPSENSOR 0x00000080U
+#define IDT_NTINTMSK_ALL \
+ (IDT_NTINTMSK_MSG | IDT_NTINTMSK_DBELL | \
+ IDT_NTINTMSK_SEVENT | IDT_NTINTMSK_TMPSENSOR)
+
+/*
+ * NTGSIGNAL register fields related constants
+ * @IDT_NTGSIGNAL_SET: Set global signal of the local partition
+ */
+#define IDT_NTGSIGNAL_SET 0x00000001U
+
+/*
+ * BARSETUP register fields related constants
+ * @IDT_BARSETUP_TYPE_MASK: Mask of the TYPE field
+ * @IDT_BARSETUP_TYPE_32: 32-bit addressing BAR
+ * @IDT_BARSETUP_TYPE_64: 64-bit addressing BAR
+ * @IDT_BARSETUP_PREF: Value of the BAR prefetchable field
+ * @IDT_BARSETUP_SIZE_MASK: Mask of the SIZE field
+ * @IDT_BARSETUP_SIZE_FLD: SIZE field offset
+ * @IDT_BARSETUP_SIZE_CFG: SIZE field value in case of config space MODE
+ * @IDT_BARSETUP_MODE_CFG: Configuration space BAR mode
+ * @IDT_BARSETUP_ATRAN_MASK: ATRAN field mask
+ * @IDT_BARSETUP_ATRAN_FLD: ATRAN field offset
+ * @IDT_BARSETUP_ATRAN_DIR: Direct address translation memory window
+ * @IDT_BARSETUP_ATRAN_LUT12: 12-entry lookup table
+ * @IDT_BARSETUP_ATRAN_LUT24: 24-entry lookup table
+ * @IDT_BARSETUP_TPART_MASK: TPART field mask
+ * @IDT_BARSETUP_TPART_FLD: TPART field offset
+ * @IDT_BARSETUP_EN: BAR enable bit
+ */
+#define IDT_BARSETUP_TYPE_MASK 0x00000006U
+#define IDT_BARSETUP_TYPE_FLD 0
+#define IDT_BARSETUP_TYPE_32 0x00000000U
+#define IDT_BARSETUP_TYPE_64 0x00000004U
+#define IDT_BARSETUP_PREF 0x00000008U
+#define IDT_BARSETUP_SIZE_MASK 0x000003F0U
+#define IDT_BARSETUP_SIZE_FLD 4
+#define IDT_BARSETUP_SIZE_CFG 0x000000C0U
+#define IDT_BARSETUP_MODE_CFG 0x00000400U
+#define IDT_BARSETUP_ATRAN_MASK 0x00001800U
+#define IDT_BARSETUP_ATRAN_FLD 11
+#define IDT_BARSETUP_ATRAN_DIR 0x00000000U
+#define IDT_BARSETUP_ATRAN_LUT12 0x00000800U
+#define IDT_BARSETUP_ATRAN_LUT24 0x00001000U
+#define IDT_BARSETUP_TPART_MASK 0x0000E000U
+#define IDT_BARSETUP_TPART_FLD 13
+#define IDT_BARSETUP_EN 0x80000000U
+
+/*
+ * NTMTBLDATA register fields related constants
+ * @IDT_NTMTBLDATA_VALID: Set the MTBL entry being valid
+ * @IDT_NTMTBLDATA_REQID_MASK: Bus:Device:Function field mask
+ * @IDT_NTMTBLDATA_REQID_FLD: Bus:Device:Function field offset
+ * @IDT_NTMTBLDATA_PART_MASK: Partition field mask
+ * @IDT_NTMTBLDATA_PART_FLD: Partition field offset
+ * @IDT_NTMTBLDATA_ATP_TRANS: Enable AT field translation on request TLPs
+ * @IDT_NTMTBLDATA_CNS_INV: Enable No Snoop attribute inversion of
+ * Completion TLPs
+ * @IDT_NTMTBLDATA_RNS_INV: Enable No Snoop attribute inversion of
+ * Request TLPs
+ */
+#define IDT_NTMTBLDATA_VALID 0x00000001U
+#define IDT_NTMTBLDATA_REQID_MASK 0x0001FFFEU
+#define IDT_NTMTBLDATA_REQID_FLD 1
+#define IDT_NTMTBLDATA_PART_MASK 0x000E0000U
+#define IDT_NTMTBLDATA_PART_FLD 17
+#define IDT_NTMTBLDATA_ATP_TRANS 0x20000000U
+#define IDT_NTMTBLDATA_CNS_INV 0x40000000U
+#define IDT_NTMTBLDATA_RNS_INV 0x80000000U
+
+/*
+ * REQIDCAP register fields related constants
+ * @IDT_REQIDCAP_REQID_MASK: Request ID field mask
+ * @IDT_REQIDCAP_REQID_FLD: Request ID field offset
+ */
+#define IDT_REQIDCAP_REQID_MASK 0x0000FFFFU
+#define IDT_REQIDCAP_REQID_FLD 0
+
+/*
+ * LUTOFFSET register fields related constants
+ * @IDT_LUTOFFSET_INDEX_MASK: Lookup table index field mask
+ * @IDT_LUTOFFSET_INDEX_FLD: Lookup table index field offset
+ * @IDT_LUTOFFSET_BAR_MASK: Lookup table BAR select field mask
+ * @IDT_LUTOFFSET_BAR_FLD: Lookup table BAR select field offset
+ */
+#define IDT_LUTOFFSET_INDEX_MASK 0x0000001FU
+#define IDT_LUTOFFSET_INDEX_FLD 0
+#define IDT_LUTOFFSET_BAR_MASK 0x00000700U
+#define IDT_LUTOFFSET_BAR_FLD 8
+
+/*
+ * LUTUDATA register fields related constants
+ * @IDT_LUTUDATA_PART_MASK: Partition field mask
+ * @IDT_LUTUDATA_PART_FLD: Partition field offset
+ * @IDT_LUTUDATA_VALID: Lookup table entry valid bit
+ */
+#define IDT_LUTUDATA_PART_MASK 0x0000000FU
+#define IDT_LUTUDATA_PART_FLD 0
+#define IDT_LUTUDATA_VALID 0x80000000U
+
+/*
+ * SWPARTxSTS register fields related constants
+ * @IDT_SWPARTxSTS_SCI: Switch partition state change initiated
+ * @IDT_SWPARTxSTS_SCC: Switch partition state change completed
+ * @IDT_SWPARTxSTS_STATE_MASK: Switch partition state mask
+ * @IDT_SWPARTxSTS_STATE_FLD: Switch partition state field offset
+ * @IDT_SWPARTxSTS_STATE_DIS: Switch partition disabled
+ * @IDT_SWPARTxSTS_STATE_ACT: Switch partition enabled
+ * @IDT_SWPARTxSTS_STATE_RES: Switch partition in reset
+ * @IDT_SWPARTxSTS_US: Switch partition has upstream port
+ * @IDT_SWPARTxSTS_USID_MASK: Switch partition upstream port ID mask
+ * @IDT_SWPARTxSTS_USID_FLD: Switch partition upstream port ID field offset
+ * @IDT_SWPARTxSTS_NT: Upstream port has NT function
+ * @IDT_SWPARTxSTS_DMA: Upstream port has DMA function
+ */
+#define IDT_SWPARTxSTS_SCI 0x00000001U
+#define IDT_SWPARTxSTS_SCC 0x00000002U
+#define IDT_SWPARTxSTS_STATE_MASK 0x00000060U
+#define IDT_SWPARTxSTS_STATE_FLD 5
+#define IDT_SWPARTxSTS_STATE_DIS 0x00000000U
+#define IDT_SWPARTxSTS_STATE_ACT 0x00000020U
+#define IDT_SWPARTxSTS_STATE_RES 0x00000060U
+#define IDT_SWPARTxSTS_US 0x00000100U
+#define IDT_SWPARTxSTS_USID_MASK 0x00003E00U
+#define IDT_SWPARTxSTS_USID_FLD 9
+#define IDT_SWPARTxSTS_NT 0x00004000U
+#define IDT_SWPARTxSTS_DMA 0x00008000U
+
+/*
+ * SWPORTxSTS register fields related constants
+ * @IDT_SWPORTxSTS_OMCI: Operation mode change initiated
+ * @IDT_SWPORTxSTS_OMCC: Operation mode change completed
+ * @IDT_SWPORTxSTS_LINKUP: Link up status
+ * @IDT_SWPORTxSTS_DS: Port lanes behave as downstream lanes
+ * @IDT_SWPORTxSTS_MODE_MASK: Port mode field mask
+ * @IDT_SWPORTxSTS_MODE_FLD: Port mode field offset
+ * @IDT_SWPORTxSTS_MODE_DIS: Port mode - disabled
+ * @IDT_SWPORTxSTS_MODE_DS: Port mode - downstream switch port
+ * @IDT_SWPORTxSTS_MODE_US: Port mode - upstream switch port
+ * @IDT_SWPORTxSTS_MODE_NT: Port mode - NT function
+ * @IDT_SWPORTxSTS_MODE_USNT: Port mode - upstream switch port with NTB
+ * @IDT_SWPORTxSTS_MODE_UNAT: Port mode - unattached
+ * @IDT_SWPORTxSTS_MODE_USDMA: Port mode - upstream switch port with DMA
+ * @IDT_SWPORTxSTS_MODE_USNTDMA:Port mode - upstream port with NTB and DMA
+ * @IDT_SWPORTxSTS_MODE_NTDMA: Port mode - NT function with DMA
+ * @IDT_SWPORTxSTS_SWPART_MASK: Port partition field mask
+ * @IDT_SWPORTxSTS_SWPART_FLD: Port partition field offset
+ * @IDT_SWPORTxSTS_DEVNUM_MASK: Port device number field mask
+ * @IDT_SWPORTxSTS_DEVNUM_FLD: Port device number field offset
+ */
+#define IDT_SWPORTxSTS_OMCI 0x00000001U
+#define IDT_SWPORTxSTS_OMCC 0x00000002U
+#define IDT_SWPORTxSTS_LINKUP 0x00000010U
+#define IDT_SWPORTxSTS_DS 0x00000020U
+#define IDT_SWPORTxSTS_MODE_MASK 0x000003C0U
+#define IDT_SWPORTxSTS_MODE_FLD 6
+#define IDT_SWPORTxSTS_MODE_DIS 0x00000000U
+#define IDT_SWPORTxSTS_MODE_DS 0x00000040U
+#define IDT_SWPORTxSTS_MODE_US 0x00000080U
+#define IDT_SWPORTxSTS_MODE_NT 0x000000C0U
+#define IDT_SWPORTxSTS_MODE_USNT 0x00000100U
+#define IDT_SWPORTxSTS_MODE_UNAT 0x00000140U
+#define IDT_SWPORTxSTS_MODE_USDMA 0x00000180U
+#define IDT_SWPORTxSTS_MODE_USNTDMA 0x000001C0U
+#define IDT_SWPORTxSTS_MODE_NTDMA 0x00000200U
+#define IDT_SWPORTxSTS_SWPART_MASK 0x00001C00U
+#define IDT_SWPORTxSTS_SWPART_FLD 10
+#define IDT_SWPORTxSTS_DEVNUM_MASK 0x001F0000U
+#define IDT_SWPORTxSTS_DEVNUM_FLD 16
+
+/*
+ * SEMSK register fields related constants
+ * @IDT_SEMSK_LINKUP: Link Up event mask bit
+ * @IDT_SEMSK_LINKDN: Link Down event mask bit
+ * @IDT_SEMSK_GSIGNAL: Global Signal event mask bit
+ */
+#define IDT_SEMSK_LINKUP 0x00000001U
+#define IDT_SEMSK_LINKDN 0x00000002U
+#define IDT_SEMSK_GSIGNAL 0x00000020U
+
+/*
+ * SWPxMSGCTL register fields related constants
+ * @IDT_SWPxMSGCTL_REG_MASK: Register select field mask
+ * @IDT_SWPxMSGCTL_REG_FLD: Register select field offset
+ * @IDT_SWPxMSGCTL_PART_MASK: Partition select field mask
+ * @IDT_SWPxMSGCTL_PART_FLD: Partition select field offset
+ */
+#define IDT_SWPxMSGCTL_REG_MASK 0x00000003U
+#define IDT_SWPxMSGCTL_REG_FLD 0
+#define IDT_SWPxMSGCTL_PART_MASK 0x00000070U
+#define IDT_SWPxMSGCTL_PART_FLD 4
+
+/*
+ * TMPSTS register fields related constants
+ * @IDT_TMPSTS_TEMP_MASK: Current temperature field mask
+ * @IDT_TMPSTS_TEMP_FLD: Current temperature field offset
+ */
+#define IDT_TMPSTS_TEMP_MASK 0x000000FFU
+#define IDT_TMPSTS_TEMP_FLD 0
+
+/*
+ * Helper macro to get/set the corresponding field value
+ * @GET_FIELD: Retrieve the value of the corresponding field
+ * @SET_FIELD: Set the specified field up
+ * @IS_FLD_SET: Check whether a field is set with value
+ */
+#define GET_FIELD(field, data) \
+ (((u32)(data) & IDT_ ##field## _MASK) >> IDT_ ##field## _FLD)
+#define SET_FIELD(field, data, value) \
+ (((u32)(data) & ~IDT_ ##field## _MASK) | \
+ ((u32)(value) << IDT_ ##field## _FLD))
+#define IS_FLD_SET(field, data, value) \
+ (((u32)(data) & IDT_ ##field## _MASK) == IDT_ ##field## _ ##value)
+
+/*
+ * Useful registers masks:
+ * @IDT_DBELL_MASK: Doorbell bits mask
+ * @IDT_OUTMSG_MASK: Out messages status bits mask
+ * @IDT_INMSG_MASK: In messages status bits mask
+ * @IDT_MSG_MASK: Any message status bits mask
+ */
+#define IDT_DBELL_MASK ((u32)0xFFFFFFFFU)
+#define IDT_OUTMSG_MASK ((u32)0x0000000FU)
+#define IDT_INMSG_MASK ((u32)0x000F0000U)
+#define IDT_MSG_MASK (IDT_INMSG_MASK | IDT_OUTMSG_MASK)
+
+/*
+ * Number of IDT NTB resources:
+ * @IDT_MSG_CNT: Number of Message registers
+ * @IDT_BAR_CNT: Number of BARs of each port
+ * @IDT_MTBL_ENTRY_CNT: Number mapping table entries
+ */
+#define IDT_MSG_CNT 4
+#define IDT_BAR_CNT 6
+#define IDT_MTBL_ENTRY_CNT 64
+
+/*
+ * General IDT PCIe-switch constant
+ * @IDT_MAX_NR_PORTS: Maximum number of ports per IDT PCIe-switch
+ * @IDT_MAX_NR_PARTS: Maximum number of partitions per IDT PCIe-switch
+ * @IDT_MAX_NR_PEERS: Maximum number of NT-peers per IDT PCIe-switch
+ * @IDT_MAX_NR_MWS: Maximum number of Memory Widows
+ * @IDT_PCIE_REGSIZE: Size of the registers in bytes
+ * @IDT_TRANS_ALIGN: Alignment of translated base address
+ * @IDT_DIR_SIZE_ALIGN: Alignment of size setting for direct translated MWs.
+ * Even though the lower 10 bits are reserved, they are
+ * treated by IDT as one's so basically there is no any
+ * alignment of size limit for DIR address translation.
+ */
+#define IDT_MAX_NR_PORTS 24
+#define IDT_MAX_NR_PARTS 8
+#define IDT_MAX_NR_PEERS 8
+#define IDT_MAX_NR_MWS 29
+#define IDT_PCIE_REGSIZE 4
+#define IDT_TRANS_ALIGN 4
+#define IDT_DIR_SIZE_ALIGN 1
+
+/*
+ * IDT Memory Windows type. Depending on the device settings, IDT supports
+ * Direct Address Translation MW registers and Lookup Table registers
+ * @IDT_MW_DIR: Direct address translation
+ * @IDT_MW_LUT12: 12-entry lookup table entry
+ * @IDT_MW_LUT24: 24-entry lookup table entry
+ *
+ * NOTE These values are exactly the same as one of the BARSETUP ATRAN field
+ */
+enum idt_mw_type {
+ IDT_MW_DIR = 0x0,
+ IDT_MW_LUT12 = 0x1,
+ IDT_MW_LUT24 = 0x2
+};
+
+/*
+ * IDT PCIe-switch model private data
+ * @name: Device name
+ * @port_cnt: Total number of NT endpoint ports
+ * @ports: Port ids
+ */
+struct idt_89hpes_cfg {
+ char *name;
+ unsigned char port_cnt;
+ unsigned char ports[];
+};
+
+/*
+ * Memory window configuration structure
+ * @type: Type of the memory window (direct address translation or lookup
+ * table)
+ *
+ * @bar: PCIe BAR the memory window referenced to
+ * @idx: Index of the memory window within the BAR
+ *
+ * @addr_align: Alignment of translated address
+ * @size_align: Alignment of memory window size
+ * @size_max: Maximum size of memory window
+ */
+struct idt_mw_cfg {
+ enum idt_mw_type type;
+
+ unsigned char bar;
+ unsigned char idx;
+
+ u64 addr_align;
+ u64 size_align;
+ u64 size_max;
+};
+
+/*
+ * Description structure of peer IDT NT-functions:
+ * @port: NT-function port
+ * @part: NT-function partition
+ *
+ * @mw_cnt: Number of memory windows supported by NT-function
+ * @mws: Array of memory windows descriptors
+ */
+struct idt_ntb_peer {
+ unsigned char port;
+ unsigned char part;
+
+ unsigned char mw_cnt;
+ struct idt_mw_cfg *mws;
+};
+
+/*
+ * Description structure of local IDT NT-function:
+ * @ntb: Linux NTB-device description structure
+ * @swcfg: Pointer to the structure of local IDT PCIe-switch
+ * specific cofnfigurations
+ *
+ * @port: Local NT-function port
+ * @part: Local NT-function partition
+ *
+ * @peer_cnt: Number of peers with activated NTB-function
+ * @peers: Array of peers descripting structures
+ * @port_idx_map: Map of port number -> peer index
+ * @part_idx_map: Map of partition number -> peer index
+ *
+ * @mtbl_lock: Mapping table access lock
+ *
+ * @mw_cnt: Number of memory windows supported by NT-function
+ * @mws: Array of memory windows descriptors
+ * @lut_lock: Lookup table access lock
+ *
+ * @msg_locks: Message registers mapping table lockers
+ *
+ * @cfgspc: Virtual address of the memory mapped configuration
+ * space of the NT-function
+ * @db_mask_lock: Doorbell mask register lock
+ * @msg_mask_lock: Message mask register lock
+ * @gasa_lock: GASA registers access lock
+ *
+ * @dbgfs_info: DebugFS info node
+ */
+struct idt_ntb_dev {
+ struct ntb_dev ntb;
+ struct idt_89hpes_cfg *swcfg;
+
+ unsigned char port;
+ unsigned char part;
+
+ unsigned char peer_cnt;
+ struct idt_ntb_peer peers[IDT_MAX_NR_PEERS];
+ char port_idx_map[IDT_MAX_NR_PORTS];
+ char part_idx_map[IDT_MAX_NR_PARTS];
+
+ spinlock_t mtbl_lock;
+
+ unsigned char mw_cnt;
+ struct idt_mw_cfg *mws;
+ spinlock_t lut_lock;
+
+ spinlock_t msg_locks[IDT_MSG_CNT];
+
+ void __iomem *cfgspc;
+ spinlock_t db_mask_lock;
+ spinlock_t msg_mask_lock;
+ spinlock_t gasa_lock;
+
+ struct dentry *dbgfs_info;
+};
+#define to_ndev_ntb(__ntb) container_of(__ntb, struct idt_ntb_dev, ntb)
+
+/*
+ * Descriptor of the IDT PCIe-switch BAR resources
+ * @setup: BAR setup register
+ * @limit: BAR limit register
+ * @ltbase: Lower translated base address
+ * @utbase: Upper translated base address
+ */
+struct idt_ntb_bar {
+ unsigned int setup;
+ unsigned int limit;
+ unsigned int ltbase;
+ unsigned int utbase;
+};
+
+/*
+ * Descriptor of the IDT PCIe-switch message resources
+ * @in: Inbound message register
+ * @out: Outbound message register
+ * @src: Source of inbound message register
+ */
+struct idt_ntb_msg {
+ unsigned int in;
+ unsigned int out;
+ unsigned int src;
+};
+
+/*
+ * Descriptor of the IDT PCIe-switch NT-function specific parameters in the
+ * PCI Configuration Space
+ * @bars: BARs related registers
+ * @msgs: Messaging related registers
+ */
+struct idt_ntb_regs {
+ struct idt_ntb_bar bars[IDT_BAR_CNT];
+ struct idt_ntb_msg msgs[IDT_MSG_CNT];
+};
+
+/*
+ * Descriptor of the IDT PCIe-switch port specific parameters in the
+ * Global Configuration Space
+ * @pcicmdsts: PCI command/status register
+ * @pcielctlsts: PCIe link control/status
+ *
+ * @ctl: Port control register
+ * @sts: Port status register
+ *
+ * @bars: BARs related registers
+ */
+struct idt_ntb_port {
+ unsigned int pcicmdsts;
+ unsigned int pcielctlsts;
+ unsigned int ntctl;
+
+ unsigned int ctl;
+ unsigned int sts;
+
+ struct idt_ntb_bar bars[IDT_BAR_CNT];
+};
+
+/*
+ * Descriptor of the IDT PCIe-switch partition specific parameters.
+ * @ctl: Partition control register in the Global Address Space
+ * @sts: Partition status register in the Global Address Space
+ * @msgctl: Messages control registers
+ */
+struct idt_ntb_part {
+ unsigned int ctl;
+ unsigned int sts;
+ unsigned int msgctl[IDT_MSG_CNT];
+};
+
+#endif /* NTB_HW_IDT_H */
diff --git a/drivers/ntb/hw/intel/ntb_hw_intel.c b/drivers/ntb/hw/intel/ntb_hw_intel.c
index 7b3b6fd..2557e2c 100644
--- a/drivers/ntb/hw/intel/ntb_hw_intel.c
+++ b/drivers/ntb/hw/intel/ntb_hw_intel.c
@@ -6,6 +6,7 @@
*
* Copyright(c) 2012 Intel Corporation. All rights reserved.
* Copyright (C) 2015 EMC Corporation. All Rights Reserved.
+ * Copyright (C) 2016 T-Platforms. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@@ -15,6 +16,7 @@
*
* Copyright(c) 2012 Intel Corporation. All rights reserved.
* Copyright (C) 2015 EMC Corporation. All Rights Reserved.
+ * Copyright (C) 2016 T-Platforms. All Rights Reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
@@ -270,12 +272,12 @@
if (db_addr) {
*db_addr = reg_addr + reg;
- dev_dbg(ndev_dev(ndev), "Peer db addr %llx\n", *db_addr);
+ dev_dbg(&ndev->ntb.pdev->dev, "Peer db addr %llx\n", *db_addr);
}
if (db_size) {
*db_size = ndev->reg->db_size;
- dev_dbg(ndev_dev(ndev), "Peer db size %llx\n", *db_size);
+ dev_dbg(&ndev->ntb.pdev->dev, "Peer db size %llx\n", *db_size);
}
return 0;
@@ -368,7 +370,8 @@
if (spad_addr) {
*spad_addr = reg_addr + reg + (idx << 2);
- dev_dbg(ndev_dev(ndev), "Peer spad addr %llx\n", *spad_addr);
+ dev_dbg(&ndev->ntb.pdev->dev, "Peer spad addr %llx\n",
+ *spad_addr);
}
return 0;
@@ -409,7 +412,7 @@
if ((ndev->hwerr_flags & NTB_HWERR_MSIX_VECTOR32_BAD) && (vec == 31))
vec_mask |= ndev->db_link_mask;
- dev_dbg(ndev_dev(ndev), "vec %d vec_mask %llx\n", vec, vec_mask);
+ dev_dbg(&ndev->ntb.pdev->dev, "vec %d vec_mask %llx\n", vec, vec_mask);
ndev->last_ts = jiffies;
@@ -428,7 +431,7 @@
{
struct intel_ntb_vec *nvec = dev;
- dev_dbg(ndev_dev(nvec->ndev), "irq: %d nvec->num: %d\n",
+ dev_dbg(&nvec->ndev->ntb.pdev->dev, "irq: %d nvec->num: %d\n",
irq, nvec->num);
return ndev_interrupt(nvec->ndev, nvec->num);
@@ -438,7 +441,7 @@
{
struct intel_ntb_dev *ndev = dev;
- return ndev_interrupt(ndev, irq - ndev_pdev(ndev)->irq);
+ return ndev_interrupt(ndev, irq - ndev->ntb.pdev->irq);
}
static int ndev_init_isr(struct intel_ntb_dev *ndev,
@@ -448,7 +451,7 @@
struct pci_dev *pdev;
int rc, i, msix_count, node;
- pdev = ndev_pdev(ndev);
+ pdev = ndev->ntb.pdev;
node = dev_to_node(&pdev->dev);
@@ -487,7 +490,7 @@
goto err_msix_request;
}
- dev_dbg(ndev_dev(ndev), "Using %d msix interrupts\n", msix_count);
+ dev_dbg(&pdev->dev, "Using %d msix interrupts\n", msix_count);
ndev->db_vec_count = msix_count;
ndev->db_vec_shift = msix_shift;
return 0;
@@ -515,7 +518,7 @@
if (rc)
goto err_msi_request;
- dev_dbg(ndev_dev(ndev), "Using msi interrupts\n");
+ dev_dbg(&pdev->dev, "Using msi interrupts\n");
ndev->db_vec_count = 1;
ndev->db_vec_shift = total_shift;
return 0;
@@ -533,7 +536,7 @@
if (rc)
goto err_intx_request;
- dev_dbg(ndev_dev(ndev), "Using intx interrupts\n");
+ dev_dbg(&pdev->dev, "Using intx interrupts\n");
ndev->db_vec_count = 1;
ndev->db_vec_shift = total_shift;
return 0;
@@ -547,7 +550,7 @@
struct pci_dev *pdev;
int i;
- pdev = ndev_pdev(ndev);
+ pdev = ndev->ntb.pdev;
/* Mask all doorbell interrupts */
ndev->db_mask = ndev->db_valid_mask;
@@ -744,7 +747,7 @@
union { u64 v64; u32 v32; u16 v16; u8 v8; } u;
ndev = filp->private_data;
- pdev = ndev_pdev(ndev);
+ pdev = ndev->ntb.pdev;
mmio = ndev->self_mmio;
buf_size = min(count, 0x800ul);
@@ -1019,7 +1022,8 @@
ndev->debugfs_info = NULL;
} else {
ndev->debugfs_dir =
- debugfs_create_dir(ndev_name(ndev), debugfs_dir);
+ debugfs_create_dir(pci_name(ndev->ntb.pdev),
+ debugfs_dir);
if (!ndev->debugfs_dir)
ndev->debugfs_info = NULL;
else
@@ -1035,20 +1039,26 @@
debugfs_remove_recursive(ndev->debugfs_dir);
}
-static int intel_ntb_mw_count(struct ntb_dev *ntb)
+static int intel_ntb_mw_count(struct ntb_dev *ntb, int pidx)
{
+ if (pidx != NTB_DEF_PEER_IDX)
+ return -EINVAL;
+
return ntb_ndev(ntb)->mw_count;
}
-static int intel_ntb_mw_get_range(struct ntb_dev *ntb, int idx,
- phys_addr_t *base,
- resource_size_t *size,
- resource_size_t *align,
- resource_size_t *align_size)
+static int intel_ntb_mw_get_align(struct ntb_dev *ntb, int pidx, int idx,
+ resource_size_t *addr_align,
+ resource_size_t *size_align,
+ resource_size_t *size_max)
{
struct intel_ntb_dev *ndev = ntb_ndev(ntb);
+ resource_size_t bar_size, mw_size;
int bar;
+ if (pidx != NTB_DEF_PEER_IDX)
+ return -EINVAL;
+
if (idx >= ndev->b2b_idx && !ndev->b2b_off)
idx += 1;
@@ -1056,24 +1066,26 @@
if (bar < 0)
return bar;
- if (base)
- *base = pci_resource_start(ndev->ntb.pdev, bar) +
- (idx == ndev->b2b_idx ? ndev->b2b_off : 0);
+ bar_size = pci_resource_len(ndev->ntb.pdev, bar);
- if (size)
- *size = pci_resource_len(ndev->ntb.pdev, bar) -
- (idx == ndev->b2b_idx ? ndev->b2b_off : 0);
+ if (idx == ndev->b2b_idx)
+ mw_size = bar_size - ndev->b2b_off;
+ else
+ mw_size = bar_size;
- if (align)
- *align = pci_resource_len(ndev->ntb.pdev, bar);
+ if (addr_align)
+ *addr_align = pci_resource_len(ndev->ntb.pdev, bar);
- if (align_size)
- *align_size = 1;
+ if (size_align)
+ *size_align = 1;
+
+ if (size_max)
+ *size_max = mw_size;
return 0;
}
-static int intel_ntb_mw_set_trans(struct ntb_dev *ntb, int idx,
+static int intel_ntb_mw_set_trans(struct ntb_dev *ntb, int pidx, int idx,
dma_addr_t addr, resource_size_t size)
{
struct intel_ntb_dev *ndev = ntb_ndev(ntb);
@@ -1083,6 +1095,9 @@
u64 base, limit, reg_val;
int bar;
+ if (pidx != NTB_DEF_PEER_IDX)
+ return -EINVAL;
+
if (idx >= ndev->b2b_idx && !ndev->b2b_off)
idx += 1;
@@ -1171,7 +1186,7 @@
return 0;
}
-static int intel_ntb_link_is_up(struct ntb_dev *ntb,
+static u64 intel_ntb_link_is_up(struct ntb_dev *ntb,
enum ntb_speed *speed,
enum ntb_width *width)
{
@@ -1206,13 +1221,13 @@
if (ndev->ntb.topo == NTB_TOPO_SEC)
return -EINVAL;
- dev_dbg(ndev_dev(ndev),
+ dev_dbg(&ntb->pdev->dev,
"Enabling link with max_speed %d max_width %d\n",
max_speed, max_width);
if (max_speed != NTB_SPEED_AUTO)
- dev_dbg(ndev_dev(ndev), "ignoring max_speed %d\n", max_speed);
+ dev_dbg(&ntb->pdev->dev, "ignoring max_speed %d\n", max_speed);
if (max_width != NTB_WIDTH_AUTO)
- dev_dbg(ndev_dev(ndev), "ignoring max_width %d\n", max_width);
+ dev_dbg(&ntb->pdev->dev, "ignoring max_width %d\n", max_width);
ntb_ctl = ioread32(ndev->self_mmio + ndev->reg->ntb_ctl);
ntb_ctl &= ~(NTB_CTL_DISABLE | NTB_CTL_CFG_LOCK);
@@ -1235,7 +1250,7 @@
if (ndev->ntb.topo == NTB_TOPO_SEC)
return -EINVAL;
- dev_dbg(ndev_dev(ndev), "Disabling link\n");
+ dev_dbg(&ntb->pdev->dev, "Disabling link\n");
/* Bring NTB link down */
ntb_cntl = ioread32(ndev->self_mmio + ndev->reg->ntb_ctl);
@@ -1249,6 +1264,36 @@
return 0;
}
+static int intel_ntb_peer_mw_count(struct ntb_dev *ntb)
+{
+ /* Numbers of inbound and outbound memory windows match */
+ return ntb_ndev(ntb)->mw_count;
+}
+
+static int intel_ntb_peer_mw_get_addr(struct ntb_dev *ntb, int idx,
+ phys_addr_t *base, resource_size_t *size)
+{
+ struct intel_ntb_dev *ndev = ntb_ndev(ntb);
+ int bar;
+
+ if (idx >= ndev->b2b_idx && !ndev->b2b_off)
+ idx += 1;
+
+ bar = ndev_mw_to_bar(ndev, idx);
+ if (bar < 0)
+ return bar;
+
+ if (base)
+ *base = pci_resource_start(ndev->ntb.pdev, bar) +
+ (idx == ndev->b2b_idx ? ndev->b2b_off : 0);
+
+ if (size)
+ *size = pci_resource_len(ndev->ntb.pdev, bar) -
+ (idx == ndev->b2b_idx ? ndev->b2b_off : 0);
+
+ return 0;
+}
+
static int intel_ntb_db_is_unsafe(struct ntb_dev *ntb)
{
return ndev_ignore_unsafe(ntb_ndev(ntb), NTB_UNSAFE_DB);
@@ -1366,30 +1411,30 @@
ndev->self_reg->spad);
}
-static int intel_ntb_peer_spad_addr(struct ntb_dev *ntb, int idx,
+static int intel_ntb_peer_spad_addr(struct ntb_dev *ntb, int pidx, int sidx,
phys_addr_t *spad_addr)
{
struct intel_ntb_dev *ndev = ntb_ndev(ntb);
- return ndev_spad_addr(ndev, idx, spad_addr, ndev->peer_addr,
+ return ndev_spad_addr(ndev, sidx, spad_addr, ndev->peer_addr,
ndev->peer_reg->spad);
}
-static u32 intel_ntb_peer_spad_read(struct ntb_dev *ntb, int idx)
+static u32 intel_ntb_peer_spad_read(struct ntb_dev *ntb, int pidx, int sidx)
{
struct intel_ntb_dev *ndev = ntb_ndev(ntb);
- return ndev_spad_read(ndev, idx,
+ return ndev_spad_read(ndev, sidx,
ndev->peer_mmio +
ndev->peer_reg->spad);
}
-static int intel_ntb_peer_spad_write(struct ntb_dev *ntb,
- int idx, u32 val)
+static int intel_ntb_peer_spad_write(struct ntb_dev *ntb, int pidx,
+ int sidx, u32 val)
{
struct intel_ntb_dev *ndev = ntb_ndev(ntb);
- return ndev_spad_write(ndev, idx, val,
+ return ndev_spad_write(ndev, sidx, val,
ndev->peer_mmio +
ndev->peer_reg->spad);
}
@@ -1442,30 +1487,33 @@
static inline enum ntb_topo atom_ppd_topo(struct intel_ntb_dev *ndev, u32 ppd)
{
+ struct device *dev = &ndev->ntb.pdev->dev;
+
switch (ppd & ATOM_PPD_TOPO_MASK) {
case ATOM_PPD_TOPO_B2B_USD:
- dev_dbg(ndev_dev(ndev), "PPD %d B2B USD\n", ppd);
+ dev_dbg(dev, "PPD %d B2B USD\n", ppd);
return NTB_TOPO_B2B_USD;
case ATOM_PPD_TOPO_B2B_DSD:
- dev_dbg(ndev_dev(ndev), "PPD %d B2B DSD\n", ppd);
+ dev_dbg(dev, "PPD %d B2B DSD\n", ppd);
return NTB_TOPO_B2B_DSD;
case ATOM_PPD_TOPO_PRI_USD:
case ATOM_PPD_TOPO_PRI_DSD: /* accept bogus PRI_DSD */
case ATOM_PPD_TOPO_SEC_USD:
case ATOM_PPD_TOPO_SEC_DSD: /* accept bogus SEC_DSD */
- dev_dbg(ndev_dev(ndev), "PPD %d non B2B disabled\n", ppd);
+ dev_dbg(dev, "PPD %d non B2B disabled\n", ppd);
return NTB_TOPO_NONE;
}
- dev_dbg(ndev_dev(ndev), "PPD %d invalid\n", ppd);
+ dev_dbg(dev, "PPD %d invalid\n", ppd);
return NTB_TOPO_NONE;
}
static void atom_link_hb(struct work_struct *work)
{
struct intel_ntb_dev *ndev = hb_ndev(work);
+ struct device *dev = &ndev->ntb.pdev->dev;
unsigned long poll_ts;
void __iomem *mmio;
u32 status32;
@@ -1503,30 +1551,30 @@
/* Clear AER Errors, write to clear */
status32 = ioread32(mmio + ATOM_ERRCORSTS_OFFSET);
- dev_dbg(ndev_dev(ndev), "ERRCORSTS = %x\n", status32);
+ dev_dbg(dev, "ERRCORSTS = %x\n", status32);
status32 &= PCI_ERR_COR_REP_ROLL;
iowrite32(status32, mmio + ATOM_ERRCORSTS_OFFSET);
/* Clear unexpected electrical idle event in LTSSM, write to clear */
status32 = ioread32(mmio + ATOM_LTSSMERRSTS0_OFFSET);
- dev_dbg(ndev_dev(ndev), "LTSSMERRSTS0 = %x\n", status32);
+ dev_dbg(dev, "LTSSMERRSTS0 = %x\n", status32);
status32 |= ATOM_LTSSMERRSTS0_UNEXPECTEDEI;
iowrite32(status32, mmio + ATOM_LTSSMERRSTS0_OFFSET);
/* Clear DeSkew Buffer error, write to clear */
status32 = ioread32(mmio + ATOM_DESKEWSTS_OFFSET);
- dev_dbg(ndev_dev(ndev), "DESKEWSTS = %x\n", status32);
+ dev_dbg(dev, "DESKEWSTS = %x\n", status32);
status32 |= ATOM_DESKEWSTS_DBERR;
iowrite32(status32, mmio + ATOM_DESKEWSTS_OFFSET);
status32 = ioread32(mmio + ATOM_IBSTERRRCRVSTS0_OFFSET);
- dev_dbg(ndev_dev(ndev), "IBSTERRRCRVSTS0 = %x\n", status32);
+ dev_dbg(dev, "IBSTERRRCRVSTS0 = %x\n", status32);
status32 &= ATOM_IBIST_ERR_OFLOW;
iowrite32(status32, mmio + ATOM_IBSTERRRCRVSTS0_OFFSET);
/* Releases the NTB state machine to allow the link to retrain */
status32 = ioread32(mmio + ATOM_LTSSMSTATEJMP_OFFSET);
- dev_dbg(ndev_dev(ndev), "LTSSMSTATEJMP = %x\n", status32);
+ dev_dbg(dev, "LTSSMSTATEJMP = %x\n", status32);
status32 &= ~ATOM_LTSSMSTATEJMP_FORCEDETECT;
iowrite32(status32, mmio + ATOM_LTSSMSTATEJMP_OFFSET);
@@ -1699,11 +1747,11 @@
int b2b_bar;
u8 bar_sz;
- pdev = ndev_pdev(ndev);
+ pdev = ndev->ntb.pdev;
mmio = ndev->self_mmio;
if (ndev->b2b_idx == UINT_MAX) {
- dev_dbg(ndev_dev(ndev), "not using b2b mw\n");
+ dev_dbg(&pdev->dev, "not using b2b mw\n");
b2b_bar = 0;
ndev->b2b_off = 0;
} else {
@@ -1711,24 +1759,21 @@
if (b2b_bar < 0)
return -EIO;
- dev_dbg(ndev_dev(ndev), "using b2b mw bar %d\n", b2b_bar);
+ dev_dbg(&pdev->dev, "using b2b mw bar %d\n", b2b_bar);
bar_size = pci_resource_len(ndev->ntb.pdev, b2b_bar);
- dev_dbg(ndev_dev(ndev), "b2b bar size %#llx\n", bar_size);
+ dev_dbg(&pdev->dev, "b2b bar size %#llx\n", bar_size);
if (b2b_mw_share && ((bar_size >> 1) >= XEON_B2B_MIN_SIZE)) {
- dev_dbg(ndev_dev(ndev),
- "b2b using first half of bar\n");
+ dev_dbg(&pdev->dev, "b2b using first half of bar\n");
ndev->b2b_off = bar_size >> 1;
} else if (bar_size >= XEON_B2B_MIN_SIZE) {
- dev_dbg(ndev_dev(ndev),
- "b2b using whole bar\n");
+ dev_dbg(&pdev->dev, "b2b using whole bar\n");
ndev->b2b_off = 0;
--ndev->mw_count;
} else {
- dev_dbg(ndev_dev(ndev),
- "b2b bar size is too small\n");
+ dev_dbg(&pdev->dev, "b2b bar size is too small\n");
return -EIO;
}
}
@@ -1738,7 +1783,7 @@
* except disable or halve the size of the b2b secondary bar.
*/
pci_read_config_byte(pdev, SKX_IMBAR1SZ_OFFSET, &bar_sz);
- dev_dbg(ndev_dev(ndev), "IMBAR1SZ %#x\n", bar_sz);
+ dev_dbg(&pdev->dev, "IMBAR1SZ %#x\n", bar_sz);
if (b2b_bar == 1) {
if (ndev->b2b_off)
bar_sz -= 1;
@@ -1748,10 +1793,10 @@
pci_write_config_byte(pdev, SKX_EMBAR1SZ_OFFSET, bar_sz);
pci_read_config_byte(pdev, SKX_EMBAR1SZ_OFFSET, &bar_sz);
- dev_dbg(ndev_dev(ndev), "EMBAR1SZ %#x\n", bar_sz);
+ dev_dbg(&pdev->dev, "EMBAR1SZ %#x\n", bar_sz);
pci_read_config_byte(pdev, SKX_IMBAR2SZ_OFFSET, &bar_sz);
- dev_dbg(ndev_dev(ndev), "IMBAR2SZ %#x\n", bar_sz);
+ dev_dbg(&pdev->dev, "IMBAR2SZ %#x\n", bar_sz);
if (b2b_bar == 2) {
if (ndev->b2b_off)
bar_sz -= 1;
@@ -1761,7 +1806,7 @@
pci_write_config_byte(pdev, SKX_EMBAR2SZ_OFFSET, bar_sz);
pci_read_config_byte(pdev, SKX_EMBAR2SZ_OFFSET, &bar_sz);
- dev_dbg(ndev_dev(ndev), "EMBAR2SZ %#x\n", bar_sz);
+ dev_dbg(&pdev->dev, "EMBAR2SZ %#x\n", bar_sz);
/* SBAR01 hit by first part of the b2b bar */
if (b2b_bar == 0)
@@ -1777,12 +1822,12 @@
bar_addr = addr->bar2_addr64 + (b2b_bar == 1 ? ndev->b2b_off : 0);
iowrite64(bar_addr, mmio + SKX_IMBAR1XLMT_OFFSET);
bar_addr = ioread64(mmio + SKX_IMBAR1XLMT_OFFSET);
- dev_dbg(ndev_dev(ndev), "IMBAR1XLMT %#018llx\n", bar_addr);
+ dev_dbg(&pdev->dev, "IMBAR1XLMT %#018llx\n", bar_addr);
bar_addr = addr->bar4_addr64 + (b2b_bar == 2 ? ndev->b2b_off : 0);
iowrite64(bar_addr, mmio + SKX_IMBAR2XLMT_OFFSET);
bar_addr = ioread64(mmio + SKX_IMBAR2XLMT_OFFSET);
- dev_dbg(ndev_dev(ndev), "IMBAR2XLMT %#018llx\n", bar_addr);
+ dev_dbg(&pdev->dev, "IMBAR2XLMT %#018llx\n", bar_addr);
/* zero incoming translation addrs */
iowrite64(0, mmio + SKX_IMBAR1XBASE_OFFSET);
@@ -1852,7 +1897,7 @@
u8 ppd;
int rc;
- pdev = ndev_pdev(ndev);
+ pdev = ndev->ntb.pdev;
ndev->reg = &skx_reg;
@@ -1861,7 +1906,7 @@
return -EIO;
ndev->ntb.topo = xeon_ppd_topo(ndev, ppd);
- dev_dbg(ndev_dev(ndev), "ppd %#x topo %s\n", ppd,
+ dev_dbg(&pdev->dev, "ppd %#x topo %s\n", ppd,
ntb_topo_string(ndev->ntb.topo));
if (ndev->ntb.topo == NTB_TOPO_NONE)
return -EINVAL;
@@ -1885,14 +1930,14 @@
ndev = container_of(ntb, struct intel_ntb_dev, ntb);
- dev_dbg(ndev_dev(ndev),
+ dev_dbg(&ntb->pdev->dev,
"Enabling link with max_speed %d max_width %d\n",
max_speed, max_width);
if (max_speed != NTB_SPEED_AUTO)
- dev_dbg(ndev_dev(ndev), "ignoring max_speed %d\n", max_speed);
+ dev_dbg(&ntb->pdev->dev, "ignoring max_speed %d\n", max_speed);
if (max_width != NTB_WIDTH_AUTO)
- dev_dbg(ndev_dev(ndev), "ignoring max_width %d\n", max_width);
+ dev_dbg(&ntb->pdev->dev, "ignoring max_width %d\n", max_width);
ntb_ctl = ioread32(ndev->self_mmio + ndev->reg->ntb_ctl);
ntb_ctl &= ~(NTB_CTL_DISABLE | NTB_CTL_CFG_LOCK);
@@ -1902,7 +1947,7 @@
return 0;
}
-static int intel_ntb3_mw_set_trans(struct ntb_dev *ntb, int idx,
+static int intel_ntb3_mw_set_trans(struct ntb_dev *ntb, int pidx, int idx,
dma_addr_t addr, resource_size_t size)
{
struct intel_ntb_dev *ndev = ntb_ndev(ntb);
@@ -1912,6 +1957,9 @@
u64 base, limit, reg_val;
int bar;
+ if (pidx != NTB_DEF_PEER_IDX)
+ return -EINVAL;
+
if (idx >= ndev->b2b_idx && !ndev->b2b_off)
idx += 1;
@@ -1953,7 +2001,7 @@
return -EIO;
}
- dev_dbg(ndev_dev(ndev), "BAR %d IMBARXBASE: %#Lx\n", bar, reg_val);
+ dev_dbg(&ntb->pdev->dev, "BAR %d IMBARXBASE: %#Lx\n", bar, reg_val);
/* set and verify setting the limit */
iowrite64(limit, mmio + limit_reg);
@@ -1964,7 +2012,7 @@
return -EIO;
}
- dev_dbg(ndev_dev(ndev), "BAR %d IMBARXLMT: %#Lx\n", bar, reg_val);
+ dev_dbg(&ntb->pdev->dev, "BAR %d IMBARXLMT: %#Lx\n", bar, reg_val);
/* setup the EP */
limit_reg = ndev->xlat_reg->bar2_limit + (idx * 0x10) + 0x4000;
@@ -1985,7 +2033,7 @@
return -EIO;
}
- dev_dbg(ndev_dev(ndev), "BAR %d EMBARXLMT: %#Lx\n", bar, reg_val);
+ dev_dbg(&ntb->pdev->dev, "BAR %d EMBARXLMT: %#Lx\n", bar, reg_val);
return 0;
}
@@ -2092,7 +2140,7 @@
static inline int xeon_ppd_bar4_split(struct intel_ntb_dev *ndev, u8 ppd)
{
if (ppd & XEON_PPD_SPLIT_BAR_MASK) {
- dev_dbg(ndev_dev(ndev), "PPD %d split bar\n", ppd);
+ dev_dbg(&ndev->ntb.pdev->dev, "PPD %d split bar\n", ppd);
return 1;
}
return 0;
@@ -2122,11 +2170,11 @@
int b2b_bar;
u8 bar_sz;
- pdev = ndev_pdev(ndev);
+ pdev = ndev->ntb.pdev;
mmio = ndev->self_mmio;
if (ndev->b2b_idx == UINT_MAX) {
- dev_dbg(ndev_dev(ndev), "not using b2b mw\n");
+ dev_dbg(&pdev->dev, "not using b2b mw\n");
b2b_bar = 0;
ndev->b2b_off = 0;
} else {
@@ -2134,24 +2182,21 @@
if (b2b_bar < 0)
return -EIO;
- dev_dbg(ndev_dev(ndev), "using b2b mw bar %d\n", b2b_bar);
+ dev_dbg(&pdev->dev, "using b2b mw bar %d\n", b2b_bar);
bar_size = pci_resource_len(ndev->ntb.pdev, b2b_bar);
- dev_dbg(ndev_dev(ndev), "b2b bar size %#llx\n", bar_size);
+ dev_dbg(&pdev->dev, "b2b bar size %#llx\n", bar_size);
if (b2b_mw_share && XEON_B2B_MIN_SIZE <= bar_size >> 1) {
- dev_dbg(ndev_dev(ndev),
- "b2b using first half of bar\n");
+ dev_dbg(&pdev->dev, "b2b using first half of bar\n");
ndev->b2b_off = bar_size >> 1;
} else if (XEON_B2B_MIN_SIZE <= bar_size) {
- dev_dbg(ndev_dev(ndev),
- "b2b using whole bar\n");
+ dev_dbg(&pdev->dev, "b2b using whole bar\n");
ndev->b2b_off = 0;
--ndev->mw_count;
} else {
- dev_dbg(ndev_dev(ndev),
- "b2b bar size is too small\n");
+ dev_dbg(&pdev->dev, "b2b bar size is too small\n");
return -EIO;
}
}
@@ -2163,7 +2208,7 @@
* offsets are not in a consistent order (bar5sz comes after ppd, odd).
*/
pci_read_config_byte(pdev, XEON_PBAR23SZ_OFFSET, &bar_sz);
- dev_dbg(ndev_dev(ndev), "PBAR23SZ %#x\n", bar_sz);
+ dev_dbg(&pdev->dev, "PBAR23SZ %#x\n", bar_sz);
if (b2b_bar == 2) {
if (ndev->b2b_off)
bar_sz -= 1;
@@ -2172,11 +2217,11 @@
}
pci_write_config_byte(pdev, XEON_SBAR23SZ_OFFSET, bar_sz);
pci_read_config_byte(pdev, XEON_SBAR23SZ_OFFSET, &bar_sz);
- dev_dbg(ndev_dev(ndev), "SBAR23SZ %#x\n", bar_sz);
+ dev_dbg(&pdev->dev, "SBAR23SZ %#x\n", bar_sz);
if (!ndev->bar4_split) {
pci_read_config_byte(pdev, XEON_PBAR45SZ_OFFSET, &bar_sz);
- dev_dbg(ndev_dev(ndev), "PBAR45SZ %#x\n", bar_sz);
+ dev_dbg(&pdev->dev, "PBAR45SZ %#x\n", bar_sz);
if (b2b_bar == 4) {
if (ndev->b2b_off)
bar_sz -= 1;
@@ -2185,10 +2230,10 @@
}
pci_write_config_byte(pdev, XEON_SBAR45SZ_OFFSET, bar_sz);
pci_read_config_byte(pdev, XEON_SBAR45SZ_OFFSET, &bar_sz);
- dev_dbg(ndev_dev(ndev), "SBAR45SZ %#x\n", bar_sz);
+ dev_dbg(&pdev->dev, "SBAR45SZ %#x\n", bar_sz);
} else {
pci_read_config_byte(pdev, XEON_PBAR4SZ_OFFSET, &bar_sz);
- dev_dbg(ndev_dev(ndev), "PBAR4SZ %#x\n", bar_sz);
+ dev_dbg(&pdev->dev, "PBAR4SZ %#x\n", bar_sz);
if (b2b_bar == 4) {
if (ndev->b2b_off)
bar_sz -= 1;
@@ -2197,10 +2242,10 @@
}
pci_write_config_byte(pdev, XEON_SBAR4SZ_OFFSET, bar_sz);
pci_read_config_byte(pdev, XEON_SBAR4SZ_OFFSET, &bar_sz);
- dev_dbg(ndev_dev(ndev), "SBAR4SZ %#x\n", bar_sz);
+ dev_dbg(&pdev->dev, "SBAR4SZ %#x\n", bar_sz);
pci_read_config_byte(pdev, XEON_PBAR5SZ_OFFSET, &bar_sz);
- dev_dbg(ndev_dev(ndev), "PBAR5SZ %#x\n", bar_sz);
+ dev_dbg(&pdev->dev, "PBAR5SZ %#x\n", bar_sz);
if (b2b_bar == 5) {
if (ndev->b2b_off)
bar_sz -= 1;
@@ -2209,7 +2254,7 @@
}
pci_write_config_byte(pdev, XEON_SBAR5SZ_OFFSET, bar_sz);
pci_read_config_byte(pdev, XEON_SBAR5SZ_OFFSET, &bar_sz);
- dev_dbg(ndev_dev(ndev), "SBAR5SZ %#x\n", bar_sz);
+ dev_dbg(&pdev->dev, "SBAR5SZ %#x\n", bar_sz);
}
/* SBAR01 hit by first part of the b2b bar */
@@ -2226,7 +2271,7 @@
else
return -EIO;
- dev_dbg(ndev_dev(ndev), "SBAR01 %#018llx\n", bar_addr);
+ dev_dbg(&pdev->dev, "SBAR01 %#018llx\n", bar_addr);
iowrite64(bar_addr, mmio + XEON_SBAR0BASE_OFFSET);
/* Other SBAR are normally hit by the PBAR xlat, except for b2b bar.
@@ -2237,26 +2282,26 @@
bar_addr = addr->bar2_addr64 + (b2b_bar == 2 ? ndev->b2b_off : 0);
iowrite64(bar_addr, mmio + XEON_SBAR23BASE_OFFSET);
bar_addr = ioread64(mmio + XEON_SBAR23BASE_OFFSET);
- dev_dbg(ndev_dev(ndev), "SBAR23 %#018llx\n", bar_addr);
+ dev_dbg(&pdev->dev, "SBAR23 %#018llx\n", bar_addr);
if (!ndev->bar4_split) {
bar_addr = addr->bar4_addr64 +
(b2b_bar == 4 ? ndev->b2b_off : 0);
iowrite64(bar_addr, mmio + XEON_SBAR45BASE_OFFSET);
bar_addr = ioread64(mmio + XEON_SBAR45BASE_OFFSET);
- dev_dbg(ndev_dev(ndev), "SBAR45 %#018llx\n", bar_addr);
+ dev_dbg(&pdev->dev, "SBAR45 %#018llx\n", bar_addr);
} else {
bar_addr = addr->bar4_addr32 +
(b2b_bar == 4 ? ndev->b2b_off : 0);
iowrite32(bar_addr, mmio + XEON_SBAR4BASE_OFFSET);
bar_addr = ioread32(mmio + XEON_SBAR4BASE_OFFSET);
- dev_dbg(ndev_dev(ndev), "SBAR4 %#010llx\n", bar_addr);
+ dev_dbg(&pdev->dev, "SBAR4 %#010llx\n", bar_addr);
bar_addr = addr->bar5_addr32 +
(b2b_bar == 5 ? ndev->b2b_off : 0);
iowrite32(bar_addr, mmio + XEON_SBAR5BASE_OFFSET);
bar_addr = ioread32(mmio + XEON_SBAR5BASE_OFFSET);
- dev_dbg(ndev_dev(ndev), "SBAR5 %#010llx\n", bar_addr);
+ dev_dbg(&pdev->dev, "SBAR5 %#010llx\n", bar_addr);
}
/* setup incoming bar limits == base addrs (zero length windows) */
@@ -2264,26 +2309,26 @@
bar_addr = addr->bar2_addr64 + (b2b_bar == 2 ? ndev->b2b_off : 0);
iowrite64(bar_addr, mmio + XEON_SBAR23LMT_OFFSET);
bar_addr = ioread64(mmio + XEON_SBAR23LMT_OFFSET);
- dev_dbg(ndev_dev(ndev), "SBAR23LMT %#018llx\n", bar_addr);
+ dev_dbg(&pdev->dev, "SBAR23LMT %#018llx\n", bar_addr);
if (!ndev->bar4_split) {
bar_addr = addr->bar4_addr64 +
(b2b_bar == 4 ? ndev->b2b_off : 0);
iowrite64(bar_addr, mmio + XEON_SBAR45LMT_OFFSET);
bar_addr = ioread64(mmio + XEON_SBAR45LMT_OFFSET);
- dev_dbg(ndev_dev(ndev), "SBAR45LMT %#018llx\n", bar_addr);
+ dev_dbg(&pdev->dev, "SBAR45LMT %#018llx\n", bar_addr);
} else {
bar_addr = addr->bar4_addr32 +
(b2b_bar == 4 ? ndev->b2b_off : 0);
iowrite32(bar_addr, mmio + XEON_SBAR4LMT_OFFSET);
bar_addr = ioread32(mmio + XEON_SBAR4LMT_OFFSET);
- dev_dbg(ndev_dev(ndev), "SBAR4LMT %#010llx\n", bar_addr);
+ dev_dbg(&pdev->dev, "SBAR4LMT %#010llx\n", bar_addr);
bar_addr = addr->bar5_addr32 +
(b2b_bar == 5 ? ndev->b2b_off : 0);
iowrite32(bar_addr, mmio + XEON_SBAR5LMT_OFFSET);
bar_addr = ioread32(mmio + XEON_SBAR5LMT_OFFSET);
- dev_dbg(ndev_dev(ndev), "SBAR5LMT %#05llx\n", bar_addr);
+ dev_dbg(&pdev->dev, "SBAR5LMT %#05llx\n", bar_addr);
}
/* zero incoming translation addrs */
@@ -2309,23 +2354,23 @@
bar_addr = peer_addr->bar2_addr64;
iowrite64(bar_addr, mmio + XEON_PBAR23XLAT_OFFSET);
bar_addr = ioread64(mmio + XEON_PBAR23XLAT_OFFSET);
- dev_dbg(ndev_dev(ndev), "PBAR23XLAT %#018llx\n", bar_addr);
+ dev_dbg(&pdev->dev, "PBAR23XLAT %#018llx\n", bar_addr);
if (!ndev->bar4_split) {
bar_addr = peer_addr->bar4_addr64;
iowrite64(bar_addr, mmio + XEON_PBAR45XLAT_OFFSET);
bar_addr = ioread64(mmio + XEON_PBAR45XLAT_OFFSET);
- dev_dbg(ndev_dev(ndev), "PBAR45XLAT %#018llx\n", bar_addr);
+ dev_dbg(&pdev->dev, "PBAR45XLAT %#018llx\n", bar_addr);
} else {
bar_addr = peer_addr->bar4_addr32;
iowrite32(bar_addr, mmio + XEON_PBAR4XLAT_OFFSET);
bar_addr = ioread32(mmio + XEON_PBAR4XLAT_OFFSET);
- dev_dbg(ndev_dev(ndev), "PBAR4XLAT %#010llx\n", bar_addr);
+ dev_dbg(&pdev->dev, "PBAR4XLAT %#010llx\n", bar_addr);
bar_addr = peer_addr->bar5_addr32;
iowrite32(bar_addr, mmio + XEON_PBAR5XLAT_OFFSET);
bar_addr = ioread32(mmio + XEON_PBAR5XLAT_OFFSET);
- dev_dbg(ndev_dev(ndev), "PBAR5XLAT %#010llx\n", bar_addr);
+ dev_dbg(&pdev->dev, "PBAR5XLAT %#010llx\n", bar_addr);
}
/* set the translation offset for b2b registers */
@@ -2343,7 +2388,7 @@
return -EIO;
/* B2B_XLAT_OFFSET is 64bit, but can only take 32bit writes */
- dev_dbg(ndev_dev(ndev), "B2BXLAT %#018llx\n", bar_addr);
+ dev_dbg(&pdev->dev, "B2BXLAT %#018llx\n", bar_addr);
iowrite32(bar_addr, mmio + XEON_B2B_XLAT_OFFSETL);
iowrite32(bar_addr >> 32, mmio + XEON_B2B_XLAT_OFFSETU);
@@ -2362,6 +2407,7 @@
static int xeon_init_ntb(struct intel_ntb_dev *ndev)
{
+ struct device *dev = &ndev->ntb.pdev->dev;
int rc;
u32 ntb_ctl;
@@ -2377,7 +2423,7 @@
switch (ndev->ntb.topo) {
case NTB_TOPO_PRI:
if (ndev->hwerr_flags & NTB_HWERR_SDOORBELL_LOCKUP) {
- dev_err(ndev_dev(ndev), "NTB Primary config disabled\n");
+ dev_err(dev, "NTB Primary config disabled\n");
return -EINVAL;
}
@@ -2395,7 +2441,7 @@
case NTB_TOPO_SEC:
if (ndev->hwerr_flags & NTB_HWERR_SDOORBELL_LOCKUP) {
- dev_err(ndev_dev(ndev), "NTB Secondary config disabled\n");
+ dev_err(dev, "NTB Secondary config disabled\n");
return -EINVAL;
}
/* use half the spads for the peer */
@@ -2420,18 +2466,17 @@
ndev->b2b_idx = b2b_mw_idx;
if (ndev->b2b_idx >= ndev->mw_count) {
- dev_dbg(ndev_dev(ndev),
+ dev_dbg(dev,
"b2b_mw_idx %d invalid for mw_count %u\n",
b2b_mw_idx, ndev->mw_count);
return -EINVAL;
}
- dev_dbg(ndev_dev(ndev),
- "setting up b2b mw idx %d means %d\n",
+ dev_dbg(dev, "setting up b2b mw idx %d means %d\n",
b2b_mw_idx, ndev->b2b_idx);
} else if (ndev->hwerr_flags & NTB_HWERR_B2BDOORBELL_BIT14) {
- dev_warn(ndev_dev(ndev), "Reduce doorbell count by 1\n");
+ dev_warn(dev, "Reduce doorbell count by 1\n");
ndev->db_count -= 1;
}
@@ -2472,7 +2517,7 @@
u8 ppd;
int rc, mem;
- pdev = ndev_pdev(ndev);
+ pdev = ndev->ntb.pdev;
switch (pdev->device) {
/* There is a Xeon hardware errata related to writes to SDOORBELL or
@@ -2548,14 +2593,14 @@
return -EIO;
ndev->ntb.topo = xeon_ppd_topo(ndev, ppd);
- dev_dbg(ndev_dev(ndev), "ppd %#x topo %s\n", ppd,
+ dev_dbg(&pdev->dev, "ppd %#x topo %s\n", ppd,
ntb_topo_string(ndev->ntb.topo));
if (ndev->ntb.topo == NTB_TOPO_NONE)
return -EINVAL;
if (ndev->ntb.topo != NTB_TOPO_SEC) {
ndev->bar4_split = xeon_ppd_bar4_split(ndev, ppd);
- dev_dbg(ndev_dev(ndev), "ppd %#x bar4_split %d\n",
+ dev_dbg(&pdev->dev, "ppd %#x bar4_split %d\n",
ppd, ndev->bar4_split);
} else {
/* This is a way for transparent BAR to figure out if we are
@@ -2565,7 +2610,7 @@
mem = pci_select_bars(pdev, IORESOURCE_MEM);
ndev->bar4_split = hweight32(mem) ==
HSX_SPLIT_BAR_MW_COUNT + 1;
- dev_dbg(ndev_dev(ndev), "mem %#x bar4_split %d\n",
+ dev_dbg(&pdev->dev, "mem %#x bar4_split %d\n",
mem, ndev->bar4_split);
}
@@ -2602,7 +2647,7 @@
rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc)
goto err_dma_mask;
- dev_warn(ndev_dev(ndev), "Cannot DMA highmem\n");
+ dev_warn(&pdev->dev, "Cannot DMA highmem\n");
}
rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
@@ -2610,7 +2655,7 @@
rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc)
goto err_dma_mask;
- dev_warn(ndev_dev(ndev), "Cannot DMA consistent highmem\n");
+ dev_warn(&pdev->dev, "Cannot DMA consistent highmem\n");
}
ndev->self_mmio = pci_iomap(pdev, 0, 0);
@@ -2636,7 +2681,7 @@
static void intel_ntb_deinit_pci(struct intel_ntb_dev *ndev)
{
- struct pci_dev *pdev = ndev_pdev(ndev);
+ struct pci_dev *pdev = ndev->ntb.pdev;
if (ndev->peer_mmio && ndev->peer_mmio != ndev->self_mmio)
pci_iounmap(pdev, ndev->peer_mmio);
@@ -2906,8 +2951,10 @@
/* operations for primary side of local ntb */
static const struct ntb_dev_ops intel_ntb_ops = {
.mw_count = intel_ntb_mw_count,
- .mw_get_range = intel_ntb_mw_get_range,
+ .mw_get_align = intel_ntb_mw_get_align,
.mw_set_trans = intel_ntb_mw_set_trans,
+ .peer_mw_count = intel_ntb_peer_mw_count,
+ .peer_mw_get_addr = intel_ntb_peer_mw_get_addr,
.link_is_up = intel_ntb_link_is_up,
.link_enable = intel_ntb_link_enable,
.link_disable = intel_ntb_link_disable,
@@ -2932,8 +2979,10 @@
static const struct ntb_dev_ops intel_ntb3_ops = {
.mw_count = intel_ntb_mw_count,
- .mw_get_range = intel_ntb_mw_get_range,
+ .mw_get_align = intel_ntb_mw_get_align,
.mw_set_trans = intel_ntb3_mw_set_trans,
+ .peer_mw_count = intel_ntb_peer_mw_count,
+ .peer_mw_get_addr = intel_ntb_peer_mw_get_addr,
.link_is_up = intel_ntb_link_is_up,
.link_enable = intel_ntb3_link_enable,
.link_disable = intel_ntb_link_disable,
@@ -3008,4 +3057,3 @@
debugfs_remove_recursive(debugfs_dir);
}
module_exit(intel_ntb_pci_driver_exit);
-
diff --git a/drivers/ntb/hw/intel/ntb_hw_intel.h b/drivers/ntb/hw/intel/ntb_hw_intel.h
index f2cf8a7..2d6c38a 100644
--- a/drivers/ntb/hw/intel/ntb_hw_intel.h
+++ b/drivers/ntb/hw/intel/ntb_hw_intel.h
@@ -382,9 +382,6 @@
struct dentry *debugfs_info;
};
-#define ndev_pdev(ndev) ((ndev)->ntb.pdev)
-#define ndev_name(ndev) pci_name(ndev_pdev(ndev))
-#define ndev_dev(ndev) (&ndev_pdev(ndev)->dev)
#define ntb_ndev(__ntb) container_of(__ntb, struct intel_ntb_dev, ntb)
#define hb_ndev(__work) container_of(__work, struct intel_ntb_dev, \
hb_timer.work)
diff --git a/drivers/ntb/ntb.c b/drivers/ntb/ntb.c
index 2e25307..03b80d8 100644
--- a/drivers/ntb/ntb.c
+++ b/drivers/ntb/ntb.c
@@ -5,6 +5,7 @@
* GPL LICENSE SUMMARY
*
* Copyright (C) 2015 EMC Corporation. All Rights Reserved.
+ * Copyright (C) 2016 T-Platforms. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@@ -18,6 +19,7 @@
* BSD LICENSE
*
* Copyright (C) 2015 EMC Corporation. All Rights Reserved.
+ * Copyright (C) 2016 T-Platforms. All Rights Reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
@@ -191,6 +193,73 @@
}
EXPORT_SYMBOL(ntb_db_event);
+void ntb_msg_event(struct ntb_dev *ntb)
+{
+ unsigned long irqflags;
+
+ spin_lock_irqsave(&ntb->ctx_lock, irqflags);
+ {
+ if (ntb->ctx_ops && ntb->ctx_ops->msg_event)
+ ntb->ctx_ops->msg_event(ntb->ctx);
+ }
+ spin_unlock_irqrestore(&ntb->ctx_lock, irqflags);
+}
+EXPORT_SYMBOL(ntb_msg_event);
+
+int ntb_default_port_number(struct ntb_dev *ntb)
+{
+ switch (ntb->topo) {
+ case NTB_TOPO_PRI:
+ case NTB_TOPO_B2B_USD:
+ return NTB_PORT_PRI_USD;
+ case NTB_TOPO_SEC:
+ case NTB_TOPO_B2B_DSD:
+ return NTB_PORT_SEC_DSD;
+ default:
+ break;
+ }
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL(ntb_default_port_number);
+
+int ntb_default_peer_port_count(struct ntb_dev *ntb)
+{
+ return NTB_DEF_PEER_CNT;
+}
+EXPORT_SYMBOL(ntb_default_peer_port_count);
+
+int ntb_default_peer_port_number(struct ntb_dev *ntb, int pidx)
+{
+ if (pidx != NTB_DEF_PEER_IDX)
+ return -EINVAL;
+
+ switch (ntb->topo) {
+ case NTB_TOPO_PRI:
+ case NTB_TOPO_B2B_USD:
+ return NTB_PORT_SEC_DSD;
+ case NTB_TOPO_SEC:
+ case NTB_TOPO_B2B_DSD:
+ return NTB_PORT_PRI_USD;
+ default:
+ break;
+ }
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL(ntb_default_peer_port_number);
+
+int ntb_default_peer_port_idx(struct ntb_dev *ntb, int port)
+{
+ int peer_port = ntb_default_peer_port_number(ntb, NTB_DEF_PEER_IDX);
+
+ if (peer_port == -EINVAL || port != peer_port)
+ return -EINVAL;
+
+ return 0;
+}
+EXPORT_SYMBOL(ntb_default_peer_port_idx);
+
static int ntb_probe(struct device *dev)
{
struct ntb_dev *ntb;
diff --git a/drivers/ntb/ntb_transport.c b/drivers/ntb/ntb_transport.c
index 10e5bf4..9a03c58 100644
--- a/drivers/ntb/ntb_transport.c
+++ b/drivers/ntb/ntb_transport.c
@@ -95,6 +95,9 @@
static struct dentry *nt_debugfs_dir;
+/* Only two-ports NTB devices are supported */
+#define PIDX NTB_DEF_PEER_IDX
+
struct ntb_queue_entry {
/* ntb_queue list reference */
struct list_head entry;
@@ -670,7 +673,7 @@
if (!mw->virt_addr)
return;
- ntb_mw_clear_trans(nt->ndev, num_mw);
+ ntb_mw_clear_trans(nt->ndev, PIDX, num_mw);
dma_free_coherent(&pdev->dev, mw->buff_size,
mw->virt_addr, mw->dma_addr);
mw->xlat_size = 0;
@@ -727,7 +730,8 @@
}
/* Notify HW the memory location of the receive buffer */
- rc = ntb_mw_set_trans(nt->ndev, num_mw, mw->dma_addr, mw->xlat_size);
+ rc = ntb_mw_set_trans(nt->ndev, PIDX, num_mw, mw->dma_addr,
+ mw->xlat_size);
if (rc) {
dev_err(&pdev->dev, "Unable to set mw%d translation", num_mw);
ntb_free_mw(nt, num_mw);
@@ -858,17 +862,17 @@
size = max_mw_size;
spad = MW0_SZ_HIGH + (i * 2);
- ntb_peer_spad_write(ndev, spad, upper_32_bits(size));
+ ntb_peer_spad_write(ndev, PIDX, spad, upper_32_bits(size));
spad = MW0_SZ_LOW + (i * 2);
- ntb_peer_spad_write(ndev, spad, lower_32_bits(size));
+ ntb_peer_spad_write(ndev, PIDX, spad, lower_32_bits(size));
}
- ntb_peer_spad_write(ndev, NUM_MWS, nt->mw_count);
+ ntb_peer_spad_write(ndev, PIDX, NUM_MWS, nt->mw_count);
- ntb_peer_spad_write(ndev, NUM_QPS, nt->qp_count);
+ ntb_peer_spad_write(ndev, PIDX, NUM_QPS, nt->qp_count);
- ntb_peer_spad_write(ndev, VERSION, NTB_TRANSPORT_VERSION);
+ ntb_peer_spad_write(ndev, PIDX, VERSION, NTB_TRANSPORT_VERSION);
/* Query the remote side for its info */
val = ntb_spad_read(ndev, VERSION);
@@ -944,7 +948,7 @@
val = ntb_spad_read(nt->ndev, QP_LINKS);
- ntb_peer_spad_write(nt->ndev, QP_LINKS, val | BIT(qp->qp_num));
+ ntb_peer_spad_write(nt->ndev, PIDX, QP_LINKS, val | BIT(qp->qp_num));
/* query remote spad for qp ready bits */
dev_dbg_ratelimited(&pdev->dev, "Remote QP link status = %x\n", val);
@@ -1055,7 +1059,12 @@
int node;
int rc, i;
- mw_count = ntb_mw_count(ndev);
+ mw_count = ntb_mw_count(ndev, PIDX);
+
+ if (!ndev->ops->mw_set_trans) {
+ dev_err(&ndev->dev, "Inbound MW based NTB API is required\n");
+ return -EINVAL;
+ }
if (ntb_db_is_unsafe(ndev))
dev_dbg(&ndev->dev,
@@ -1064,6 +1073,9 @@
dev_dbg(&ndev->dev,
"scratchpad is unsafe, proceed anyway...\n");
+ if (ntb_peer_port_count(ndev) != NTB_DEF_PEER_CNT)
+ dev_warn(&ndev->dev, "Multi-port NTB devices unsupported\n");
+
node = dev_to_node(&ndev->dev);
nt = kzalloc_node(sizeof(*nt), GFP_KERNEL, node);
@@ -1094,8 +1106,13 @@
for (i = 0; i < mw_count; i++) {
mw = &nt->mw_vec[i];
- rc = ntb_mw_get_range(ndev, i, &mw->phys_addr, &mw->phys_size,
- &mw->xlat_align, &mw->xlat_align_size);
+ rc = ntb_mw_get_align(ndev, PIDX, i, &mw->xlat_align,
+ &mw->xlat_align_size, NULL);
+ if (rc)
+ goto err1;
+
+ rc = ntb_peer_mw_get_addr(ndev, i, &mw->phys_addr,
+ &mw->phys_size);
if (rc)
goto err1;
@@ -2091,8 +2108,7 @@
val = ntb_spad_read(qp->ndev, QP_LINKS);
- ntb_peer_spad_write(qp->ndev, QP_LINKS,
- val & ~BIT(qp->qp_num));
+ ntb_peer_spad_write(qp->ndev, PIDX, QP_LINKS, val & ~BIT(qp->qp_num));
if (qp->link_is_up)
ntb_send_link_down(qp);
diff --git a/drivers/ntb/test/ntb_perf.c b/drivers/ntb/test/ntb_perf.c
index 5cab283..759f772 100644
--- a/drivers/ntb/test/ntb_perf.c
+++ b/drivers/ntb/test/ntb_perf.c
@@ -76,6 +76,7 @@
#define DMA_RETRIES 20
#define SZ_4G (1ULL << 32)
#define MAX_SEG_ORDER 20 /* no larger than 1M for kmalloc buffer */
+#define PIDX NTB_DEF_PEER_IDX
MODULE_LICENSE(DRIVER_LICENSE);
MODULE_VERSION(DRIVER_VERSION);
@@ -100,6 +101,10 @@
module_param(use_dma, bool, 0644);
MODULE_PARM_DESC(use_dma, "Using DMA engine to measure performance");
+static bool on_node = true; /* default to 1 */
+module_param(on_node, bool, 0644);
+MODULE_PARM_DESC(on_node, "Run threads only on NTB device node (default: true)");
+
struct perf_mw {
phys_addr_t phys_addr;
resource_size_t phys_size;
@@ -135,9 +140,6 @@
bool link_is_up;
struct delayed_work link_work;
wait_queue_head_t link_wq;
- struct dentry *debugfs_node_dir;
- struct dentry *debugfs_run;
- struct dentry *debugfs_threads;
u8 perf_threads;
/* mutex ensures only one set of threads run at once */
struct mutex run_mutex;
@@ -344,6 +346,10 @@
static bool perf_dma_filter_fn(struct dma_chan *chan, void *node)
{
+ /* Is the channel required to be on the same node as the device? */
+ if (!on_node)
+ return true;
+
return dev_to_node(&chan->dev->device) == (int)(unsigned long)node;
}
@@ -361,7 +367,7 @@
pr_debug("kthread %s starting...\n", current->comm);
- node = dev_to_node(&pdev->dev);
+ node = on_node ? dev_to_node(&pdev->dev) : NUMA_NO_NODE;
if (use_dma && !pctx->dma_chan) {
dma_cap_mask_t dma_mask;
@@ -454,7 +460,7 @@
if (!mw->virt_addr)
return;
- ntb_mw_clear_trans(perf->ntb, 0);
+ ntb_mw_clear_trans(perf->ntb, PIDX, 0);
dma_free_coherent(&pdev->dev, mw->buf_size,
mw->virt_addr, mw->dma_addr);
mw->xlat_size = 0;
@@ -490,7 +496,7 @@
mw->buf_size = 0;
}
- rc = ntb_mw_set_trans(perf->ntb, 0, mw->dma_addr, mw->xlat_size);
+ rc = ntb_mw_set_trans(perf->ntb, PIDX, 0, mw->dma_addr, mw->xlat_size);
if (rc) {
dev_err(&perf->ntb->dev, "Unable to set mw0 translation\n");
perf_free_mw(perf);
@@ -517,9 +523,9 @@
if (max_mw_size && size > max_mw_size)
size = max_mw_size;
- ntb_peer_spad_write(ndev, MW_SZ_HIGH, upper_32_bits(size));
- ntb_peer_spad_write(ndev, MW_SZ_LOW, lower_32_bits(size));
- ntb_peer_spad_write(ndev, VERSION, PERF_VERSION);
+ ntb_peer_spad_write(ndev, PIDX, MW_SZ_HIGH, upper_32_bits(size));
+ ntb_peer_spad_write(ndev, PIDX, MW_SZ_LOW, lower_32_bits(size));
+ ntb_peer_spad_write(ndev, PIDX, VERSION, PERF_VERSION);
/* now read what peer wrote */
val = ntb_spad_read(ndev, VERSION);
@@ -561,8 +567,12 @@
mw = &perf->mw;
- rc = ntb_mw_get_range(ntb, 0, &mw->phys_addr, &mw->phys_size,
- &mw->xlat_align, &mw->xlat_align_size);
+ rc = ntb_mw_get_align(ntb, PIDX, 0, &mw->xlat_align,
+ &mw->xlat_align_size, NULL);
+ if (rc)
+ return rc;
+
+ rc = ntb_peer_mw_get_addr(ntb, 0, &mw->phys_addr, &mw->phys_size);
if (rc)
return rc;
@@ -677,7 +687,8 @@
pr_info("Fix run_order to %u\n", run_order);
}
- node = dev_to_node(&perf->ntb->pdev->dev);
+ node = on_node ? dev_to_node(&perf->ntb->pdev->dev)
+ : NUMA_NO_NODE;
atomic_set(&perf->tdone, 0);
/* launch kernel thread */
@@ -723,34 +734,71 @@
static int perf_debugfs_setup(struct perf_ctx *perf)
{
struct pci_dev *pdev = perf->ntb->pdev;
+ struct dentry *debugfs_node_dir;
+ struct dentry *debugfs_run;
+ struct dentry *debugfs_threads;
+ struct dentry *debugfs_seg_order;
+ struct dentry *debugfs_run_order;
+ struct dentry *debugfs_use_dma;
+ struct dentry *debugfs_on_node;
if (!debugfs_initialized())
return -ENODEV;
+ /* Assumpion: only one NTB device in the system */
if (!perf_debugfs_dir) {
perf_debugfs_dir = debugfs_create_dir(KBUILD_MODNAME, NULL);
if (!perf_debugfs_dir)
return -ENODEV;
}
- perf->debugfs_node_dir = debugfs_create_dir(pci_name(pdev),
- perf_debugfs_dir);
- if (!perf->debugfs_node_dir)
- return -ENODEV;
+ debugfs_node_dir = debugfs_create_dir(pci_name(pdev),
+ perf_debugfs_dir);
+ if (!debugfs_node_dir)
+ goto err;
- perf->debugfs_run = debugfs_create_file("run", S_IRUSR | S_IWUSR,
- perf->debugfs_node_dir, perf,
- &ntb_perf_debugfs_run);
- if (!perf->debugfs_run)
- return -ENODEV;
+ debugfs_run = debugfs_create_file("run", S_IRUSR | S_IWUSR,
+ debugfs_node_dir, perf,
+ &ntb_perf_debugfs_run);
+ if (!debugfs_run)
+ goto err;
- perf->debugfs_threads = debugfs_create_u8("threads", S_IRUSR | S_IWUSR,
- perf->debugfs_node_dir,
- &perf->perf_threads);
- if (!perf->debugfs_threads)
- return -ENODEV;
+ debugfs_threads = debugfs_create_u8("threads", S_IRUSR | S_IWUSR,
+ debugfs_node_dir,
+ &perf->perf_threads);
+ if (!debugfs_threads)
+ goto err;
+
+ debugfs_seg_order = debugfs_create_u32("seg_order", 0600,
+ debugfs_node_dir,
+ &seg_order);
+ if (!debugfs_seg_order)
+ goto err;
+
+ debugfs_run_order = debugfs_create_u32("run_order", 0600,
+ debugfs_node_dir,
+ &run_order);
+ if (!debugfs_run_order)
+ goto err;
+
+ debugfs_use_dma = debugfs_create_bool("use_dma", 0600,
+ debugfs_node_dir,
+ &use_dma);
+ if (!debugfs_use_dma)
+ goto err;
+
+ debugfs_on_node = debugfs_create_bool("on_node", 0600,
+ debugfs_node_dir,
+ &on_node);
+ if (!debugfs_on_node)
+ goto err;
return 0;
+
+err:
+ debugfs_remove_recursive(perf_debugfs_dir);
+ perf_debugfs_dir = NULL;
+ return -ENODEV;
}
static int perf_probe(struct ntb_client *client, struct ntb_dev *ntb)
@@ -766,8 +814,15 @@
return -EIO;
}
- node = dev_to_node(&pdev->dev);
+ if (!ntb->ops->mw_set_trans) {
+ dev_err(&ntb->dev, "Need inbound MW based NTB API\n");
+ return -EINVAL;
+ }
+ if (ntb_peer_port_count(ntb) != NTB_DEF_PEER_CNT)
+ dev_warn(&ntb->dev, "Multi-port NTB devices unsupported\n");
+
+ node = on_node ? dev_to_node(&pdev->dev) : NUMA_NO_NODE;
perf = kzalloc_node(sizeof(*perf), GFP_KERNEL, node);
if (!perf) {
rc = -ENOMEM;
diff --git a/drivers/ntb/test/ntb_pingpong.c b/drivers/ntb/test/ntb_pingpong.c
index 4358611..938a18bc 100644
--- a/drivers/ntb/test/ntb_pingpong.c
+++ b/drivers/ntb/test/ntb_pingpong.c
@@ -90,6 +90,9 @@
module_param(db_init, ulong, 0644);
MODULE_PARM_DESC(db_init, "Initial doorbell bits to ring on the peer");
+/* Only two-ports NTB devices are supported */
+#define PIDX NTB_DEF_PEER_IDX
+
struct pp_ctx {
struct ntb_dev *ntb;
u64 db_bits;
@@ -135,7 +138,7 @@
"Ping bits %#llx read %#x write %#x\n",
db_bits, spad_rd, spad_wr);
- ntb_peer_spad_write(pp->ntb, 0, spad_wr);
+ ntb_peer_spad_write(pp->ntb, PIDX, 0, spad_wr);
ntb_peer_db_set(pp->ntb, db_bits);
ntb_db_clear_mask(pp->ntb, db_mask);
@@ -222,6 +225,12 @@
}
}
+ if (ntb_spad_count(ntb) < 1) {
+ dev_dbg(&ntb->dev, "no enough scratchpads\n");
+ rc = -EINVAL;
+ goto err_pp;
+ }
+
if (ntb_spad_is_unsafe(ntb)) {
dev_dbg(&ntb->dev, "scratchpad is unsafe\n");
if (!unsafe) {
@@ -230,6 +239,9 @@
}
}
+ if (ntb_peer_port_count(ntb) != NTB_DEF_PEER_CNT)
+ dev_warn(&ntb->dev, "multi-port NTB is unsupported\n");
+
pp = kmalloc(sizeof(*pp), GFP_KERNEL);
if (!pp) {
rc = -ENOMEM;
diff --git a/drivers/ntb/test/ntb_tool.c b/drivers/ntb/test/ntb_tool.c
index 61bf2ef..f002bf4 100644
--- a/drivers/ntb/test/ntb_tool.c
+++ b/drivers/ntb/test/ntb_tool.c
@@ -119,7 +119,10 @@
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESCRIPTION);
-#define MAX_MWS 16
+/* It is rare to have hadrware with greater than six MWs */
+#define MAX_MWS 6
+/* Only two-ports devices are supported */
+#define PIDX NTB_DEF_PEER_IDX
static struct dentry *tool_dbgfs;
@@ -459,13 +462,22 @@
tool_spad_read,
tool_spad_write);
+static u32 ntb_tool_peer_spad_read(struct ntb_dev *ntb, int sidx)
+{
+ return ntb_peer_spad_read(ntb, PIDX, sidx);
+}
+
static ssize_t tool_peer_spad_read(struct file *filep, char __user *ubuf,
size_t size, loff_t *offp)
{
struct tool_ctx *tc = filep->private_data;
- return tool_spadfn_read(tc, ubuf, size, offp,
- tc->ntb->ops->peer_spad_read);
+ return tool_spadfn_read(tc, ubuf, size, offp, ntb_tool_peer_spad_read);
+}
+
+static int ntb_tool_peer_spad_write(struct ntb_dev *ntb, int sidx, u32 val)
+{
+ return ntb_peer_spad_write(ntb, PIDX, sidx, val);
}
static ssize_t tool_peer_spad_write(struct file *filep, const char __user *ubuf,
@@ -474,7 +486,7 @@
struct tool_ctx *tc = filep->private_data;
return tool_spadfn_write(tc, ubuf, size, offp,
- tc->ntb->ops->peer_spad_write);
+ ntb_tool_peer_spad_write);
}
static TOOL_FOPS_RDWR(tool_peer_spad_fops,
@@ -668,28 +680,27 @@
{
int rc;
struct tool_mw *mw = &tc->mws[idx];
- phys_addr_t base;
- resource_size_t size, align, align_size;
+ resource_size_t size, align_addr, align_size;
char buf[16];
if (mw->peer)
return 0;
- rc = ntb_mw_get_range(tc->ntb, idx, &base, &size, &align,
- &align_size);
+ rc = ntb_mw_get_align(tc->ntb, PIDX, idx, &align_addr,
+ &align_size, &size);
if (rc)
return rc;
mw->size = min_t(resource_size_t, req_size, size);
- mw->size = round_up(mw->size, align);
+ mw->size = round_up(mw->size, align_addr);
mw->size = round_up(mw->size, align_size);
mw->peer = dma_alloc_coherent(&tc->ntb->pdev->dev, mw->size,
&mw->peer_dma, GFP_KERNEL);
- if (!mw->peer)
+ if (!mw->peer || !IS_ALIGNED(mw->peer_dma, align_addr))
return -ENOMEM;
- rc = ntb_mw_set_trans(tc->ntb, idx, mw->peer_dma, mw->size);
+ rc = ntb_mw_set_trans(tc->ntb, PIDX, idx, mw->peer_dma, mw->size);
if (rc)
goto err_free_dma;
@@ -716,7 +727,7 @@
struct tool_mw *mw = &tc->mws[idx];
if (mw->peer) {
- ntb_mw_clear_trans(tc->ntb, idx);
+ ntb_mw_clear_trans(tc->ntb, PIDX, idx);
dma_free_coherent(&tc->ntb->pdev->dev, mw->size,
mw->peer,
mw->peer_dma);
@@ -742,8 +753,9 @@
phys_addr_t base;
resource_size_t mw_size;
- resource_size_t align;
+ resource_size_t align_addr;
resource_size_t align_size;
+ resource_size_t max_size;
buf_size = min_t(size_t, size, 512);
@@ -751,8 +763,9 @@
if (!buf)
return -ENOMEM;
- ntb_mw_get_range(mw->tc->ntb, mw->idx,
- &base, &mw_size, &align, &align_size);
+ ntb_mw_get_align(mw->tc->ntb, PIDX, mw->idx,
+ &align_addr, &align_size, &max_size);
+ ntb_peer_mw_get_addr(mw->tc->ntb, mw->idx, &base, &mw_size);
off += scnprintf(buf + off, buf_size - off,
"Peer MW %d Information:\n", mw->idx);
@@ -767,13 +780,17 @@
off += scnprintf(buf + off, buf_size - off,
"Alignment \t%lld\n",
- (unsigned long long)align);
+ (unsigned long long)align_addr);
off += scnprintf(buf + off, buf_size - off,
"Size Alignment \t%lld\n",
(unsigned long long)align_size);
off += scnprintf(buf + off, buf_size - off,
+ "Size Max \t%lld\n",
+ (unsigned long long)max_size);
+
+ off += scnprintf(buf + off, buf_size - off,
"Ready \t%c\n",
(mw->peer) ? 'Y' : 'N');
@@ -827,8 +844,7 @@
phys_addr_t base;
int rc;
- rc = ntb_mw_get_range(tc->ntb, idx, &base, &mw->win_size,
- NULL, NULL);
+ rc = ntb_peer_mw_get_addr(tc->ntb, idx, &base, &mw->win_size);
if (rc)
return rc;
@@ -913,12 +929,27 @@
int rc;
int i;
+ if (!ntb->ops->mw_set_trans) {
+ dev_dbg(&ntb->dev, "need inbound MW based NTB API\n");
+ rc = -EINVAL;
+ goto err_tc;
+ }
+
+ if (ntb_spad_count(ntb) < 1) {
+ dev_dbg(&ntb->dev, "no enough scratchpads\n");
+ rc = -EINVAL;
+ goto err_tc;
+ }
+
if (ntb_db_is_unsafe(ntb))
dev_dbg(&ntb->dev, "doorbell is unsafe\n");
if (ntb_spad_is_unsafe(ntb))
dev_dbg(&ntb->dev, "scratchpad is unsafe\n");
+ if (ntb_peer_port_count(ntb) != NTB_DEF_PEER_CNT)
+ dev_warn(&ntb->dev, "multi-port NTB is unsupported\n");
+
tc = kzalloc(sizeof(*tc), GFP_KERNEL);
if (!tc) {
rc = -ENOMEM;
@@ -928,7 +959,7 @@
tc->ntb = ntb;
init_waitqueue_head(&tc->link_wq);
- tc->mw_count = min(ntb_mw_count(tc->ntb), MAX_MWS);
+ tc->mw_count = min(ntb_mw_count(tc->ntb, PIDX), MAX_MWS);
for (i = 0; i < tc->mw_count; i++) {
rc = tool_init_mw(tc, i);
if (rc)
diff --git a/drivers/nvdimm/core.c b/drivers/nvdimm/core.c
index 7cd99b1..75bc08c 100644
--- a/drivers/nvdimm/core.c
+++ b/drivers/nvdimm/core.c
@@ -421,14 +421,15 @@
static void __add_badblock_range(struct badblocks *bb, u64 ns_offset, u64 len)
{
const unsigned int sector_size = 512;
- sector_t start_sector;
+ sector_t start_sector, end_sector;
u64 num_sectors;
u32 rem;
start_sector = div_u64(ns_offset, sector_size);
- num_sectors = div_u64_rem(len, sector_size, &rem);
+ end_sector = div_u64_rem(ns_offset + len, sector_size, &rem);
if (rem)
- num_sectors++;
+ end_sector++;
+ num_sectors = end_sector - start_sector;
if (unlikely(num_sectors > (u64)INT_MAX)) {
u64 remaining = num_sectors;
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index cb96f4a..c49f1f8 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -336,7 +336,7 @@
c.directive.opcode = nvme_admin_directive_recv;
c.directive.nsid = cpu_to_le32(nsid);
- c.directive.numd = sizeof(*s);
+ c.directive.numd = cpu_to_le32(sizeof(*s));
c.directive.doper = NVME_DIR_RCV_ST_OP_PARAM;
c.directive.dtype = NVME_DIR_STREAMS;
@@ -1995,6 +1995,9 @@
int serial_len = sizeof(ctrl->serial);
int model_len = sizeof(ctrl->model);
+ if (!uuid_is_null(&ns->uuid))
+ return sprintf(buf, "uuid.%pU\n", &ns->uuid);
+
if (memchr_inv(ns->nguid, 0, sizeof(ns->nguid)))
return sprintf(buf, "eui.%16phN\n", ns->nguid);
@@ -2709,7 +2712,8 @@
mutex_lock(&ctrl->namespaces_mutex);
/* Forcibly unquiesce queues to avoid blocking dispatch */
- blk_mq_unquiesce_queue(ctrl->admin_q);
+ if (ctrl->admin_q)
+ blk_mq_unquiesce_queue(ctrl->admin_q);
list_for_each_entry(ns, &ctrl->namespaces, list) {
/*
diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c
index d666ada..5c2a08e 100644
--- a/drivers/nvme/host/fc.c
+++ b/drivers/nvme/host/fc.c
@@ -1888,7 +1888,7 @@
* the target device is present
*/
if (ctrl->rport->remoteport.port_state != FC_OBJSTATE_ONLINE)
- return BLK_STS_IOERR;
+ goto busy;
if (!nvme_fc_ctrl_get(ctrl))
return BLK_STS_IOERR;
@@ -1958,22 +1958,25 @@
queue->lldd_handle, &op->fcp_req);
if (ret) {
- if (op->rq) /* normal request */
+ if (!(op->flags & FCOP_FLAGS_AEN))
nvme_fc_unmap_data(ctrl, op->rq, op);
- /* else - aen. no cleanup needed */
nvme_fc_ctrl_put(ctrl);
- if (ret != -EBUSY)
+ if (ctrl->rport->remoteport.port_state == FC_OBJSTATE_ONLINE &&
+ ret != -EBUSY)
return BLK_STS_IOERR;
- if (op->rq)
- blk_mq_delay_run_hw_queue(queue->hctx, NVMEFC_QUEUE_DELAY);
-
- return BLK_STS_RESOURCE;
+ goto busy;
}
return BLK_STS_OK;
+
+busy:
+ if (!(op->flags & FCOP_FLAGS_AEN) && queue->hctx)
+ blk_mq_delay_run_hw_queue(queue->hctx, NVMEFC_QUEUE_DELAY);
+
+ return BLK_STS_RESOURCE;
}
static blk_status_t
@@ -2802,66 +2805,70 @@
return ERR_PTR(ret);
}
-enum {
- FCT_TRADDR_ERR = 0,
- FCT_TRADDR_WWNN = 1 << 0,
- FCT_TRADDR_WWPN = 1 << 1,
-};
struct nvmet_fc_traddr {
u64 nn;
u64 pn;
};
-static const match_table_t traddr_opt_tokens = {
- { FCT_TRADDR_WWNN, "nn-%s" },
- { FCT_TRADDR_WWPN, "pn-%s" },
- { FCT_TRADDR_ERR, NULL }
-};
-
static int
-nvme_fc_parse_address(struct nvmet_fc_traddr *traddr, char *buf)
+__nvme_fc_parse_u64(substring_t *sstr, u64 *val)
{
- substring_t args[MAX_OPT_ARGS];
- char *options, *o, *p;
- int token, ret = 0;
u64 token64;
- options = o = kstrdup(buf, GFP_KERNEL);
- if (!options)
- return -ENOMEM;
+ if (match_u64(sstr, &token64))
+ return -EINVAL;
+ *val = token64;
- while ((p = strsep(&o, ":\n")) != NULL) {
- if (!*p)
- continue;
+ return 0;
+}
- token = match_token(p, traddr_opt_tokens, args);
- switch (token) {
- case FCT_TRADDR_WWNN:
- if (match_u64(args, &token64)) {
- ret = -EINVAL;
- goto out;
- }
- traddr->nn = token64;
- break;
- case FCT_TRADDR_WWPN:
- if (match_u64(args, &token64)) {
- ret = -EINVAL;
- goto out;
- }
- traddr->pn = token64;
- break;
- default:
- pr_warn("unknown traddr token or missing value '%s'\n",
- p);
- ret = -EINVAL;
- goto out;
- }
- }
+/*
+ * This routine validates and extracts the WWN's from the TRADDR string.
+ * As kernel parsers need the 0x to determine number base, universally
+ * build string to parse with 0x prefix before parsing name strings.
+ */
+static int
+nvme_fc_parse_traddr(struct nvmet_fc_traddr *traddr, char *buf, size_t blen)
+{
+ char name[2 + NVME_FC_TRADDR_HEXNAMELEN + 1];
+ substring_t wwn = { name, &name[sizeof(name)-1] };
+ int nnoffset, pnoffset;
-out:
- kfree(options);
- return ret;
+ /* validate it string one of the 2 allowed formats */
+ if (strnlen(buf, blen) == NVME_FC_TRADDR_MAXLENGTH &&
+ !strncmp(buf, "nn-0x", NVME_FC_TRADDR_OXNNLEN) &&
+ !strncmp(&buf[NVME_FC_TRADDR_MAX_PN_OFFSET],
+ "pn-0x", NVME_FC_TRADDR_OXNNLEN)) {
+ nnoffset = NVME_FC_TRADDR_OXNNLEN;
+ pnoffset = NVME_FC_TRADDR_MAX_PN_OFFSET +
+ NVME_FC_TRADDR_OXNNLEN;
+ } else if ((strnlen(buf, blen) == NVME_FC_TRADDR_MINLENGTH &&
+ !strncmp(buf, "nn-", NVME_FC_TRADDR_NNLEN) &&
+ !strncmp(&buf[NVME_FC_TRADDR_MIN_PN_OFFSET],
+ "pn-", NVME_FC_TRADDR_NNLEN))) {
+ nnoffset = NVME_FC_TRADDR_NNLEN;
+ pnoffset = NVME_FC_TRADDR_MIN_PN_OFFSET + NVME_FC_TRADDR_NNLEN;
+ } else
+ goto out_einval;
+
+ name[0] = '0';
+ name[1] = 'x';
+ name[2 + NVME_FC_TRADDR_HEXNAMELEN] = 0;
+
+ memcpy(&name[2], &buf[nnoffset], NVME_FC_TRADDR_HEXNAMELEN);
+ if (__nvme_fc_parse_u64(&wwn, &traddr->nn))
+ goto out_einval;
+
+ memcpy(&name[2], &buf[pnoffset], NVME_FC_TRADDR_HEXNAMELEN);
+ if (__nvme_fc_parse_u64(&wwn, &traddr->pn))
+ goto out_einval;
+
+ return 0;
+
+out_einval:
+ pr_warn("%s: bad traddr string\n", __func__);
+ return -EINVAL;
}
static struct nvme_ctrl *
@@ -2875,11 +2882,11 @@
unsigned long flags;
int ret;
- ret = nvme_fc_parse_address(&raddr, opts->traddr);
+ ret = nvme_fc_parse_traddr(&raddr, opts->traddr, NVMF_TRADDR_SIZE);
if (ret || !raddr.nn || !raddr.pn)
return ERR_PTR(-EINVAL);
- ret = nvme_fc_parse_address(&laddr, opts->host_traddr);
+ ret = nvme_fc_parse_traddr(&laddr, opts->host_traddr, NVMF_TRADDR_SIZE);
if (ret || !laddr.nn || !laddr.pn)
return ERR_PTR(-EINVAL);
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index d10d2f2..cd888a4 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -539,7 +539,7 @@
}
#endif
-static bool nvme_setup_prps(struct nvme_dev *dev, struct request *req)
+static blk_status_t nvme_setup_prps(struct nvme_dev *dev, struct request *req)
{
struct nvme_iod *iod = blk_mq_rq_to_pdu(req);
struct dma_pool *pool;
@@ -556,7 +556,7 @@
length -= (page_size - offset);
if (length <= 0)
- return true;
+ return BLK_STS_OK;
dma_len -= (page_size - offset);
if (dma_len) {
@@ -569,7 +569,7 @@
if (length <= page_size) {
iod->first_dma = dma_addr;
- return true;
+ return BLK_STS_OK;
}
nprps = DIV_ROUND_UP(length, page_size);
@@ -585,7 +585,7 @@
if (!prp_list) {
iod->first_dma = dma_addr;
iod->npages = -1;
- return false;
+ return BLK_STS_RESOURCE;
}
list[0] = prp_list;
iod->first_dma = prp_dma;
@@ -595,7 +595,7 @@
__le64 *old_prp_list = prp_list;
prp_list = dma_pool_alloc(pool, GFP_ATOMIC, &prp_dma);
if (!prp_list)
- return false;
+ return BLK_STS_RESOURCE;
list[iod->npages++] = prp_list;
prp_list[0] = old_prp_list[i - 1];
old_prp_list[i - 1] = cpu_to_le64(prp_dma);
@@ -609,13 +609,29 @@
break;
if (dma_len > 0)
continue;
- BUG_ON(dma_len < 0);
+ if (unlikely(dma_len < 0))
+ goto bad_sgl;
sg = sg_next(sg);
dma_addr = sg_dma_address(sg);
dma_len = sg_dma_len(sg);
}
- return true;
+ return BLK_STS_OK;
+
+ bad_sgl:
+ if (WARN_ONCE(1, "Invalid SGL for payload:%d nents:%d\n",
+ blk_rq_payload_bytes(req), iod->nents)) {
+ for_each_sg(iod->sg, sg, iod->nents, i) {
+ dma_addr_t phys = sg_phys(sg);
+ pr_warn("sg[%d] phys_addr:%pad offset:%d length:%d "
+ "dma_address:%pad dma_length:%d\n", i, &phys,
+ sg->offset, sg->length,
+ &sg_dma_address(sg),
+ sg_dma_len(sg));
+ }
+ }
+ return BLK_STS_IOERR;
+
}
static blk_status_t nvme_map_data(struct nvme_dev *dev, struct request *req,
@@ -637,7 +653,8 @@
DMA_ATTR_NO_WARN))
goto out;
- if (!nvme_setup_prps(dev, req))
+ ret = nvme_setup_prps(dev, req);
+ if (ret != BLK_STS_OK)
goto out_unmap;
ret = BLK_STS_IOERR;
@@ -1602,7 +1619,7 @@
static int nvme_alloc_host_mem(struct nvme_dev *dev, u64 min, u64 preferred)
{
struct nvme_host_mem_buf_desc *descs;
- u32 chunk_size, max_entries;
+ u32 chunk_size, max_entries, len;
int i = 0;
void **bufs;
u64 size = 0, tmp;
@@ -1621,10 +1638,10 @@
if (!bufs)
goto out_free_descs;
- for (size = 0; size < preferred; size += chunk_size) {
- u32 len = min_t(u64, chunk_size, preferred - size);
+ for (size = 0; size < preferred; size += len) {
dma_addr_t dma_addr;
+ len = min_t(u64, chunk_size, preferred - size);
bufs[i] = dma_alloc_attrs(dev->dev, len, &dma_addr, GFP_KERNEL,
DMA_ATTR_NO_KERNEL_MAPPING | DMA_ATTR_NO_WARN);
if (!bufs[i])
@@ -2282,7 +2299,7 @@
result = nvme_dev_map(dev);
if (result)
- goto free;
+ goto put_pci;
INIT_WORK(&dev->ctrl.reset_work, nvme_reset_work);
INIT_WORK(&dev->remove_work, nvme_remove_dead_ctrl_work);
@@ -2291,7 +2308,7 @@
result = nvme_setup_prp_pools(dev);
if (result)
- goto put_pci;
+ goto unmap;
quirks |= check_dell_samsung_bug(pdev);
@@ -2308,9 +2325,10 @@
release_pools:
nvme_release_prp_pools(dev);
+ unmap:
+ nvme_dev_unmap(dev);
put_pci:
put_device(dev->dev);
- nvme_dev_unmap(dev);
free:
kfree(dev->queues);
kfree(dev);
@@ -2466,6 +2484,9 @@
{ PCI_VDEVICE(INTEL, 0x0a54),
.driver_data = NVME_QUIRK_STRIPE_SIZE |
NVME_QUIRK_DEALLOCATE_ZEROES, },
+ { PCI_VDEVICE(INTEL, 0x0a55),
+ .driver_data = NVME_QUIRK_STRIPE_SIZE |
+ NVME_QUIRK_DEALLOCATE_ZEROES, },
{ PCI_VDEVICE(INTEL, 0xf1a5), /* Intel 600P/P3100 */
.driver_data = NVME_QUIRK_NO_DEEPEST_PS },
{ PCI_VDEVICE(INTEL, 0x5845), /* Qemu emulated controller */
diff --git a/drivers/nvme/target/admin-cmd.c b/drivers/nvme/target/admin-cmd.c
index 35f930d..2d7a98a 100644
--- a/drivers/nvme/target/admin-cmd.c
+++ b/drivers/nvme/target/admin-cmd.c
@@ -168,11 +168,21 @@
nvmet_req_complete(req, status);
}
+static void copy_and_pad(char *dst, int dst_len, const char *src, int src_len)
+{
+ int len = min(src_len, dst_len);
+
+ memcpy(dst, src, len);
+ if (dst_len > len)
+ memset(dst + len, ' ', dst_len - len);
+}
+
static void nvmet_execute_identify_ctrl(struct nvmet_req *req)
{
struct nvmet_ctrl *ctrl = req->sq->ctrl;
struct nvme_id_ctrl *id;
u16 status = 0;
+ const char model[] = "Linux";
id = kzalloc(sizeof(*id), GFP_KERNEL);
if (!id) {
@@ -184,8 +194,10 @@
id->vid = 0;
id->ssvid = 0;
- memset(id->sn, ' ', sizeof(id->sn));
- snprintf(id->sn, sizeof(id->sn), "%llx", ctrl->serial);
+ bin2hex(id->sn, &ctrl->subsys->serial,
+ min(sizeof(ctrl->subsys->serial), sizeof(id->sn) / 2));
+ copy_and_pad(id->mn, sizeof(id->mn), model, sizeof(model) - 1);
+ copy_and_pad(id->fr, sizeof(id->fr), UTS_RELEASE, strlen(UTS_RELEASE));
memset(id->mn, ' ', sizeof(id->mn));
strncpy((char *)id->mn, "Linux", sizeof(id->mn));
diff --git a/drivers/nvme/target/configfs.c b/drivers/nvme/target/configfs.c
index a358ecd..0a0067e 100644
--- a/drivers/nvme/target/configfs.c
+++ b/drivers/nvme/target/configfs.c
@@ -650,7 +650,7 @@
CONFIGFS_ATTR(nvmet_subsys_, attr_allow_any_host);
-static ssize_t nvmet_subsys_version_show(struct config_item *item,
+static ssize_t nvmet_subsys_attr_version_show(struct config_item *item,
char *page)
{
struct nvmet_subsys *subsys = to_subsys(item);
@@ -666,7 +666,7 @@
(int)NVME_MINOR(subsys->ver));
}
-static ssize_t nvmet_subsys_version_store(struct config_item *item,
+static ssize_t nvmet_subsys_attr_version_store(struct config_item *item,
const char *page, size_t count)
{
struct nvmet_subsys *subsys = to_subsys(item);
@@ -684,11 +684,33 @@
return count;
}
-CONFIGFS_ATTR(nvmet_subsys_, version);
+CONFIGFS_ATTR(nvmet_subsys_, attr_version);
+
+static ssize_t nvmet_subsys_attr_serial_show(struct config_item *item,
+ char *page)
+{
+ struct nvmet_subsys *subsys = to_subsys(item);
+
+ return snprintf(page, PAGE_SIZE, "%llx\n", subsys->serial);
+}
+
+static ssize_t nvmet_subsys_attr_serial_store(struct config_item *item,
+ const char *page, size_t count)
+{
+ struct nvmet_subsys *subsys = to_subsys(item);
+
+ down_write(&nvmet_config_sem);
+ sscanf(page, "%llx\n", &subsys->serial);
+ up_write(&nvmet_config_sem);
+
+ return count;
+}
+CONFIGFS_ATTR(nvmet_subsys_, attr_serial);
static struct configfs_attribute *nvmet_subsys_attrs[] = {
&nvmet_subsys_attr_attr_allow_any_host,
- &nvmet_subsys_attr_version,
+ &nvmet_subsys_attr_attr_version,
+ &nvmet_subsys_attr_attr_serial,
NULL,
};
diff --git a/drivers/nvme/target/core.c b/drivers/nvme/target/core.c
index b5b4ac1..f4b02bb 100644
--- a/drivers/nvme/target/core.c
+++ b/drivers/nvme/target/core.c
@@ -767,9 +767,6 @@
memcpy(ctrl->subsysnqn, subsysnqn, NVMF_NQN_SIZE);
memcpy(ctrl->hostnqn, hostnqn, NVMF_NQN_SIZE);
- /* generate a random serial number as our controllers are ephemeral: */
- get_random_bytes(&ctrl->serial, sizeof(ctrl->serial));
-
kref_init(&ctrl->ref);
ctrl->subsys = subsys;
@@ -928,6 +925,8 @@
return NULL;
subsys->ver = NVME_VS(1, 3, 0); /* NVMe 1.3.0 */
+ /* generate a random serial number as our controllers are ephemeral: */
+ get_random_bytes(&subsys->serial, sizeof(subsys->serial));
switch (type) {
case NVME_NQN_NVME:
diff --git a/drivers/nvme/target/fc.c b/drivers/nvme/target/fc.c
index 1e6dcc2..31ca55d 100644
--- a/drivers/nvme/target/fc.c
+++ b/drivers/nvme/target/fc.c
@@ -1174,14 +1174,14 @@
*/
if (iod->rqstdatalen < FCNVME_LSDESC_CRA_RQST_MINLEN)
ret = VERR_CR_ASSOC_LEN;
- else if (rqst->desc_list_len <
- cpu_to_be32(FCNVME_LSDESC_CRA_RQST_MIN_LISTLEN))
+ else if (be32_to_cpu(rqst->desc_list_len) <
+ FCNVME_LSDESC_CRA_RQST_MIN_LISTLEN)
ret = VERR_CR_ASSOC_RQST_LEN;
else if (rqst->assoc_cmd.desc_tag !=
cpu_to_be32(FCNVME_LSDESC_CREATE_ASSOC_CMD))
ret = VERR_CR_ASSOC_CMD;
- else if (rqst->assoc_cmd.desc_len <
- cpu_to_be32(FCNVME_LSDESC_CRA_CMD_DESC_MIN_DESCLEN))
+ else if (be32_to_cpu(rqst->assoc_cmd.desc_len) <
+ FCNVME_LSDESC_CRA_CMD_DESC_MIN_DESCLEN)
ret = VERR_CR_ASSOC_CMD_LEN;
else if (!rqst->assoc_cmd.ersp_ratio ||
(be16_to_cpu(rqst->assoc_cmd.ersp_ratio) >=
@@ -2293,66 +2293,70 @@
}
EXPORT_SYMBOL_GPL(nvmet_fc_rcv_fcp_abort);
-enum {
- FCT_TRADDR_ERR = 0,
- FCT_TRADDR_WWNN = 1 << 0,
- FCT_TRADDR_WWPN = 1 << 1,
-};
struct nvmet_fc_traddr {
u64 nn;
u64 pn;
};
-static const match_table_t traddr_opt_tokens = {
- { FCT_TRADDR_WWNN, "nn-%s" },
- { FCT_TRADDR_WWPN, "pn-%s" },
- { FCT_TRADDR_ERR, NULL }
-};
-
static int
-nvmet_fc_parse_traddr(struct nvmet_fc_traddr *traddr, char *buf)
+__nvme_fc_parse_u64(substring_t *sstr, u64 *val)
{
- substring_t args[MAX_OPT_ARGS];
- char *options, *o, *p;
- int token, ret = 0;
u64 token64;
- options = o = kstrdup(buf, GFP_KERNEL);
- if (!options)
- return -ENOMEM;
+ if (match_u64(sstr, &token64))
+ return -EINVAL;
+ *val = token64;
- while ((p = strsep(&o, ":\n")) != NULL) {
- if (!*p)
- continue;
+ return 0;
+}
- token = match_token(p, traddr_opt_tokens, args);
- switch (token) {
- case FCT_TRADDR_WWNN:
- if (match_u64(args, &token64)) {
- ret = -EINVAL;
- goto out;
- }
- traddr->nn = token64;
- break;
- case FCT_TRADDR_WWPN:
- if (match_u64(args, &token64)) {
- ret = -EINVAL;
- goto out;
- }
- traddr->pn = token64;
- break;
- default:
- pr_warn("unknown traddr token or missing value '%s'\n",
- p);
- ret = -EINVAL;
- goto out;
- }
- }
+/*
+ * This routine validates and extracts the WWN's from the TRADDR string.
+ * As kernel parsers need the 0x to determine number base, universally
+ * build string to parse with 0x prefix before parsing name strings.
+ */
+static int
+nvme_fc_parse_traddr(struct nvmet_fc_traddr *traddr, char *buf, size_t blen)
+{
+ char name[2 + NVME_FC_TRADDR_HEXNAMELEN + 1];
+ substring_t wwn = { name, &name[sizeof(name)-1] };
+ int nnoffset, pnoffset;
-out:
- kfree(options);
- return ret;
+ /* validate it string one of the 2 allowed formats */
+ if (strnlen(buf, blen) == NVME_FC_TRADDR_MAXLENGTH &&
+ !strncmp(buf, "nn-0x", NVME_FC_TRADDR_OXNNLEN) &&
+ !strncmp(&buf[NVME_FC_TRADDR_MAX_PN_OFFSET],
+ "pn-0x", NVME_FC_TRADDR_OXNNLEN)) {
+ nnoffset = NVME_FC_TRADDR_OXNNLEN;
+ pnoffset = NVME_FC_TRADDR_MAX_PN_OFFSET +
+ NVME_FC_TRADDR_OXNNLEN;
+ } else if ((strnlen(buf, blen) == NVME_FC_TRADDR_MINLENGTH &&
+ !strncmp(buf, "nn-", NVME_FC_TRADDR_NNLEN) &&
+ !strncmp(&buf[NVME_FC_TRADDR_MIN_PN_OFFSET],
+ "pn-", NVME_FC_TRADDR_NNLEN))) {
+ nnoffset = NVME_FC_TRADDR_NNLEN;
+ pnoffset = NVME_FC_TRADDR_MIN_PN_OFFSET + NVME_FC_TRADDR_NNLEN;
+ } else
+ goto out_einval;
+
+ name[0] = '0';
+ name[1] = 'x';
+ name[2 + NVME_FC_TRADDR_HEXNAMELEN] = 0;
+
+ memcpy(&name[2], &buf[nnoffset], NVME_FC_TRADDR_HEXNAMELEN);
+ if (__nvme_fc_parse_u64(&wwn, &traddr->nn))
+ goto out_einval;
+
+ memcpy(&name[2], &buf[pnoffset], NVME_FC_TRADDR_HEXNAMELEN);
+ if (__nvme_fc_parse_u64(&wwn, &traddr->pn))
+ goto out_einval;
+
+ return 0;
+
+out_einval:
+ pr_warn("%s: bad traddr string\n", __func__);
+ return -EINVAL;
}
static int
@@ -2370,7 +2374,8 @@
/* map the traddr address info to a target port */
- ret = nvmet_fc_parse_traddr(&traddr, port->disc_addr.traddr);
+ ret = nvme_fc_parse_traddr(&traddr, port->disc_addr.traddr,
+ sizeof(port->disc_addr.traddr));
if (ret)
return ret;
diff --git a/drivers/nvme/target/nvmet.h b/drivers/nvme/target/nvmet.h
index 747bbdb..e3b244c 100644
--- a/drivers/nvme/target/nvmet.h
+++ b/drivers/nvme/target/nvmet.h
@@ -112,7 +112,6 @@
struct mutex lock;
u64 cap;
- u64 serial;
u32 cc;
u32 csts;
@@ -152,6 +151,7 @@
u16 max_qid;
u64 ver;
+ u64 serial;
char *subsysnqn;
struct config_group group;
diff --git a/drivers/nvmem/rockchip-efuse.c b/drivers/nvmem/rockchip-efuse.c
index a0d4ede..63e3eb5 100644
--- a/drivers/nvmem/rockchip-efuse.c
+++ b/drivers/nvmem/rockchip-efuse.c
@@ -170,7 +170,7 @@
.data = (void *)&rockchip_rk3288_efuse_read,
},
{
- .compatible = "rockchip,rk322x-efuse",
+ .compatible = "rockchip,rk3228-efuse",
.data = (void *)&rockchip_rk3288_efuse_read,
},
{
diff --git a/drivers/of/irq.c b/drivers/of/irq.c
index 6ce72aa..ab21c84 100644
--- a/drivers/of/irq.c
+++ b/drivers/of/irq.c
@@ -476,7 +476,7 @@
int i;
for (i = 0; i < nr_irqs; i++, res++)
- if (!of_irq_to_resource(dev, i, res))
+ if (of_irq_to_resource(dev, i, res) <= 0)
break;
return i;
diff --git a/drivers/of/property.c b/drivers/of/property.c
index eda50b4..067f9fa 100644
--- a/drivers/of/property.c
+++ b/drivers/of/property.c
@@ -708,6 +708,15 @@
{
unsigned int depth;
+ if (!node)
+ return NULL;
+
+ /*
+ * Preserve usecount for passed in node as of_get_next_parent()
+ * will do of_node_put() on it.
+ */
+ of_node_get(node);
+
/* Walk 3 levels up only if there is 'ports' node. */
for (depth = 3; depth && node; depth--) {
node = of_get_next_parent(node);
@@ -728,12 +737,16 @@
struct device_node *of_graph_get_remote_port_parent(
const struct device_node *node)
{
- struct device_node *np;
+ struct device_node *np, *pp;
/* Get remote endpoint node. */
np = of_graph_get_remote_endpoint(node);
- return of_graph_get_port_parent(np);
+ pp = of_graph_get_port_parent(np);
+
+ of_node_put(np);
+
+ return pp;
}
EXPORT_SYMBOL(of_graph_get_remote_port_parent);
diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c
index 055f83f..b1ff46f 100644
--- a/drivers/parisc/pdc_stable.c
+++ b/drivers/parisc/pdc_stable.c
@@ -333,11 +333,11 @@
/* Update the symlink to the real device */
sysfs_remove_link(&entry->kobj, "device");
+ write_unlock(&entry->rw_lock);
+
ret = sysfs_create_link(&entry->kobj, &entry->dev->kobj, "device");
WARN_ON(ret);
- write_unlock(&entry->rw_lock);
-
printk(KERN_INFO PDCS_PREFIX ": changed \"%s\" path to \"%s\"\n",
entry->name, buf);
@@ -954,7 +954,7 @@
NULL,
};
-static struct attribute_group pdcs_attr_group = {
+static const struct attribute_group pdcs_attr_group = {
.attrs = pdcs_subsys_attrs,
};
@@ -998,6 +998,7 @@
/* kobject is now registered */
write_lock(&entry->rw_lock);
entry->ready = 2;
+ write_unlock(&entry->rw_lock);
/* Add a nice symlink to the real device */
if (entry->dev) {
@@ -1005,7 +1006,6 @@
WARN_ON(err);
}
- write_unlock(&entry->rw_lock);
kobject_uevent(&entry->kobj, KOBJ_ADD);
}
diff --git a/drivers/pci/host/pcie-rockchip.c b/drivers/pci/host/pcie-rockchip.c
index 5acf8694..7bb9870 100644
--- a/drivers/pci/host/pcie-rockchip.c
+++ b/drivers/pci/host/pcie-rockchip.c
@@ -1483,7 +1483,7 @@
bridge->swizzle_irq = pci_common_swizzle;
err = pci_scan_root_bus_bridge(bridge);
- if (!err)
+ if (err < 0)
goto err_free_res;
bus = bridge->bus;
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 607f677..d51e873 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -511,6 +511,7 @@
}
pci_restore_state(pci_dev);
+ pci_pme_restore(pci_dev);
return 0;
}
@@ -522,6 +523,7 @@
{
pci_power_up(pci_dev);
pci_restore_state(pci_dev);
+ pci_pme_restore(pci_dev);
pci_fixup_device(pci_fixup_resume_early, pci_dev);
}
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index d88edf5..af0cc34 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1801,7 +1801,11 @@
pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr);
}
-static void pci_pme_restore(struct pci_dev *dev)
+/**
+ * pci_pme_restore - Restore PME configuration after config space restore.
+ * @dev: PCI device to update.
+ */
+void pci_pme_restore(struct pci_dev *dev)
{
u16 pmcsr;
@@ -1811,6 +1815,7 @@
pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
if (dev->wakeup_prepared) {
pmcsr |= PCI_PM_CTRL_PME_ENABLE;
+ pmcsr &= ~PCI_PM_CTRL_PME_STATUS;
} else {
pmcsr &= ~PCI_PM_CTRL_PME_ENABLE;
pmcsr |= PCI_PM_CTRL_PME_STATUS;
@@ -1907,14 +1912,9 @@
{
int ret = 0;
- /*
- * Don't do the same thing twice in a row for one device, but restore
- * PME Enable in case it has been updated by config space restoration.
- */
- if (!!enable == !!dev->wakeup_prepared) {
- pci_pme_restore(dev);
+ /* Don't do the same thing twice in a row for one device. */
+ if (!!enable == !!dev->wakeup_prepared)
return 0;
- }
/*
* According to "PCI System Architecture" 4th ed. by Tom Shanley & Don
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 03e3d02..22e0617 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -71,6 +71,7 @@
void pci_disable_enabled_device(struct pci_dev *dev);
int pci_finish_runtime_suspend(struct pci_dev *dev);
int __pci_pme_wakeup(struct pci_dev *dev, void *ign);
+void pci_pme_restore(struct pci_dev *dev);
bool pci_dev_keep_suspended(struct pci_dev *dev);
void pci_dev_complete_resume(struct pci_dev *pci_dev);
void pci_config_pm_runtime_get(struct pci_dev *dev);
diff --git a/drivers/pci/pcie/pme.c b/drivers/pci/pcie/pme.c
index 80e58d2..fafdb16 100644
--- a/drivers/pci/pcie/pme.c
+++ b/drivers/pci/pcie/pme.c
@@ -40,17 +40,11 @@
}
__setup("pcie_pme=", pcie_pme_setup);
-enum pme_suspend_level {
- PME_SUSPEND_NONE = 0,
- PME_SUSPEND_WAKEUP,
- PME_SUSPEND_NOIRQ,
-};
-
struct pcie_pme_service_data {
spinlock_t lock;
struct pcie_device *srv;
struct work_struct work;
- enum pme_suspend_level suspend_level;
+ bool noirq; /* If set, keep the PME interrupt disabled. */
};
/**
@@ -228,7 +222,7 @@
spin_lock_irq(&data->lock);
for (;;) {
- if (data->suspend_level != PME_SUSPEND_NONE)
+ if (data->noirq)
break;
pcie_capability_read_dword(port, PCI_EXP_RTSTA, &rtsta);
@@ -255,7 +249,7 @@
spin_lock_irq(&data->lock);
}
- if (data->suspend_level == PME_SUSPEND_NONE)
+ if (!data->noirq)
pcie_pme_interrupt_enable(port, true);
spin_unlock_irq(&data->lock);
@@ -378,7 +372,7 @@
{
struct pcie_pme_service_data *data = get_service_data(srv);
struct pci_dev *port = srv->port;
- bool wakeup, wake_irq_enabled = false;
+ bool wakeup;
int ret;
if (device_may_wakeup(&port->dev)) {
@@ -388,19 +382,16 @@
wakeup = pcie_pme_check_wakeup(port->subordinate);
up_read(&pci_bus_sem);
}
- spin_lock_irq(&data->lock);
if (wakeup) {
ret = enable_irq_wake(srv->irq);
- if (ret == 0) {
- data->suspend_level = PME_SUSPEND_WAKEUP;
- wake_irq_enabled = true;
- }
+ if (!ret)
+ return 0;
}
- if (!wake_irq_enabled) {
- pcie_pme_interrupt_enable(port, false);
- pcie_clear_root_pme_status(port);
- data->suspend_level = PME_SUSPEND_NOIRQ;
- }
+
+ spin_lock_irq(&data->lock);
+ pcie_pme_interrupt_enable(port, false);
+ pcie_clear_root_pme_status(port);
+ data->noirq = true;
spin_unlock_irq(&data->lock);
synchronize_irq(srv->irq);
@@ -417,15 +408,15 @@
struct pcie_pme_service_data *data = get_service_data(srv);
spin_lock_irq(&data->lock);
- if (data->suspend_level == PME_SUSPEND_NOIRQ) {
+ if (data->noirq) {
struct pci_dev *port = srv->port;
pcie_clear_root_pme_status(port);
pcie_pme_interrupt_enable(port, true);
+ data->noirq = false;
} else {
disable_irq_wake(srv->irq);
}
- data->suspend_level = PME_SUSPEND_NONE;
spin_unlock_irq(&data->lock);
return 0;
diff --git a/drivers/perf/arm_pmu.c b/drivers/perf/arm_pmu.c
index dc459eb..1c5e0f3 100644
--- a/drivers/perf/arm_pmu.c
+++ b/drivers/perf/arm_pmu.c
@@ -569,22 +569,41 @@
if (irq != other_irq) {
pr_warn("mismatched PPIs detected.\n");
err = -EINVAL;
+ goto err_out;
}
} else {
- err = request_irq(irq, handler,
- IRQF_NOBALANCING | IRQF_NO_THREAD, "arm-pmu",
+ struct arm_pmu_platdata *platdata = armpmu_get_platdata(armpmu);
+ unsigned long irq_flags;
+
+ err = irq_force_affinity(irq, cpumask_of(cpu));
+
+ if (err && num_possible_cpus() > 1) {
+ pr_warn("unable to set irq affinity (irq=%d, cpu=%u)\n",
+ irq, cpu);
+ goto err_out;
+ }
+
+ if (platdata && platdata->irq_flags) {
+ irq_flags = platdata->irq_flags;
+ } else {
+ irq_flags = IRQF_PERCPU |
+ IRQF_NOBALANCING |
+ IRQF_NO_THREAD;
+ }
+
+ err = request_irq(irq, handler, irq_flags, "arm-pmu",
per_cpu_ptr(&hw_events->percpu_pmu, cpu));
}
- if (err) {
- pr_err("unable to request IRQ%d for ARM PMU counters\n",
- irq);
- return err;
- }
+ if (err)
+ goto err_out;
cpumask_set_cpu(cpu, &armpmu->active_irqs);
-
return 0;
+
+err_out:
+ pr_err("unable to request IRQ%d for ARM PMU counters\n", irq);
+ return err;
}
int armpmu_request_irqs(struct arm_pmu *armpmu)
@@ -628,12 +647,6 @@
enable_percpu_irq(irq, IRQ_TYPE_NONE);
return 0;
}
-
- if (irq_force_affinity(irq, cpumask_of(cpu)) &&
- num_possible_cpus() > 1) {
- pr_warn("unable to set irq affinity (irq=%d, cpu=%u)\n",
- irq, cpu);
- }
}
return 0;
diff --git a/drivers/perf/arm_pmu_platform.c b/drivers/perf/arm_pmu_platform.c
index 69255f53..4eafa7a 100644
--- a/drivers/perf/arm_pmu_platform.c
+++ b/drivers/perf/arm_pmu_platform.c
@@ -131,8 +131,8 @@
}
if (!pmu_has_irq_affinity(pdev->dev.of_node)) {
- pr_warn("no interrupt-affinity property for %s, guessing.\n",
- of_node_full_name(pdev->dev.of_node));
+ pr_warn("no interrupt-affinity property for %pOF, guessing.\n",
+ pdev->dev.of_node);
}
/*
@@ -211,7 +211,7 @@
}
if (ret) {
- pr_info("%s: failed to probe PMU!\n", of_node_full_name(node));
+ pr_info("%pOF: failed to probe PMU!\n", node);
goto out_free;
}
@@ -228,8 +228,7 @@
out_free_irqs:
armpmu_free_irqs(pmu);
out_free:
- pr_info("%s: failed to register PMU devices!\n",
- of_node_full_name(node));
+ pr_info("%pOF: failed to register PMU devices!\n", node);
armpmu_free(pmu);
return ret;
}
diff --git a/drivers/perf/qcom_l2_pmu.c b/drivers/perf/qcom_l2_pmu.c
index c259848..b242cce 100644
--- a/drivers/perf/qcom_l2_pmu.c
+++ b/drivers/perf/qcom_l2_pmu.c
@@ -546,6 +546,7 @@
}
if ((event != event->group_leader) &&
+ !is_software_event(event->group_leader) &&
(L2_EVT_GROUP(event->group_leader->attr.config) ==
L2_EVT_GROUP(event->attr.config))) {
dev_dbg_ratelimited(&l2cache_pmu->pdev->dev,
@@ -558,6 +559,7 @@
list_for_each_entry(sibling, &event->group_leader->sibling_list,
group_entry) {
if ((sibling != event) &&
+ !is_software_event(sibling) &&
(L2_EVT_GROUP(sibling->attr.config) ==
L2_EVT_GROUP(event->attr.config))) {
dev_dbg_ratelimited(&l2cache_pmu->pdev->dev,
diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig
index 37371b8..64fc59c 100644
--- a/drivers/phy/broadcom/Kconfig
+++ b/drivers/phy/broadcom/Kconfig
@@ -30,8 +30,8 @@
tristate "Broadcom Northstar USB 3.0 PHY Driver"
depends on ARCH_BCM_IPROC || COMPILE_TEST
depends on HAS_IOMEM && OF
+ depends on MDIO_BUS
select GENERIC_PHY
- select MDIO_DEVICE
help
Enable this to support Broadcom USB 3.0 PHY connected to the USB
controller on Northstar family.
diff --git a/drivers/pinctrl/stm32/Kconfig b/drivers/pinctrl/stm32/Kconfig
index 3b8026f..7e1fe39 100644
--- a/drivers/pinctrl/stm32/Kconfig
+++ b/drivers/pinctrl/stm32/Kconfig
@@ -6,29 +6,30 @@
select PINMUX
select GENERIC_PINCONF
select GPIOLIB
+ select IRQ_DOMAIN_HIERARCHY
select MFD_SYSCON
config PINCTRL_STM32F429
bool "STMicroelectronics STM32F429 pin control" if COMPILE_TEST && !MACH_STM32F429
- depends on OF && IRQ_DOMAIN_HIERARCHY
+ depends on OF
default MACH_STM32F429
select PINCTRL_STM32
config PINCTRL_STM32F469
bool "STMicroelectronics STM32F469 pin control" if COMPILE_TEST && !MACH_STM32F469
- depends on OF && IRQ_DOMAIN_HIERARCHY
+ depends on OF
default MACH_STM32F469
select PINCTRL_STM32
config PINCTRL_STM32F746
bool "STMicroelectronics STM32F746 pin control" if COMPILE_TEST && !MACH_STM32F746
- depends on OF && IRQ_DOMAIN_HIERARCHY
+ depends on OF
default MACH_STM32F746
select PINCTRL_STM32
config PINCTRL_STM32H743
bool "STMicroelectronics STM32H743 pin control" if COMPILE_TEST && !MACH_STM32H743
- depends on OF && IRQ_DOMAIN_HIERARCHY
+ depends on OF
default MACH_STM32H743
select PINCTRL_STM32
endif
diff --git a/drivers/platform/mips/cpu_hwmon.c b/drivers/platform/mips/cpu_hwmon.c
index 4300a55..322de58 100644
--- a/drivers/platform/mips/cpu_hwmon.c
+++ b/drivers/platform/mips/cpu_hwmon.c
@@ -17,17 +17,27 @@
*/
int loongson3_cpu_temp(int cpu)
{
- u32 reg;
+ u32 reg, prid_rev;
reg = LOONGSON_CHIPTEMP(cpu);
- if ((read_c0_prid() & PRID_REV_MASK) == PRID_REV_LOONGSON3A_R1)
+ prid_rev = read_c0_prid() & PRID_REV_MASK;
+ switch (prid_rev) {
+ case PRID_REV_LOONGSON3A_R1:
reg = (reg >> 8) & 0xff;
- else
+ break;
+ case PRID_REV_LOONGSON3A_R2:
+ case PRID_REV_LOONGSON3B_R1:
+ case PRID_REV_LOONGSON3B_R2:
reg = ((reg >> 8) & 0xff) - 100;
-
+ break;
+ case PRID_REV_LOONGSON3A_R3:
+ reg = (reg & 0xffff)*731/0x4000 - 273;
+ break;
+ }
return (int)reg * 1000;
}
+static int nr_packages;
static struct device *cpu_hwmon_dev;
static ssize_t get_hwmon_name(struct device *dev,
@@ -51,88 +61,74 @@
return sprintf(buf, "cpu-hwmon\n");
}
-static ssize_t get_cpu0_temp(struct device *dev,
+static ssize_t get_cpu_temp(struct device *dev,
struct device_attribute *attr, char *buf);
-static ssize_t get_cpu1_temp(struct device *dev,
- struct device_attribute *attr, char *buf);
-static ssize_t cpu0_temp_label(struct device *dev,
- struct device_attribute *attr, char *buf);
-static ssize_t cpu1_temp_label(struct device *dev,
+static ssize_t cpu_temp_label(struct device *dev,
struct device_attribute *attr, char *buf);
-static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, get_cpu0_temp, NULL, 1);
-static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, cpu0_temp_label, NULL, 1);
-static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, get_cpu1_temp, NULL, 2);
-static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, cpu1_temp_label, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, get_cpu_temp, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, cpu_temp_label, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, get_cpu_temp, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, cpu_temp_label, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, get_cpu_temp, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp3_label, S_IRUGO, cpu_temp_label, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, get_cpu_temp, NULL, 4);
+static SENSOR_DEVICE_ATTR(temp4_label, S_IRUGO, cpu_temp_label, NULL, 4);
-static const struct attribute *hwmon_cputemp1[] = {
- &sensor_dev_attr_temp1_input.dev_attr.attr,
- &sensor_dev_attr_temp1_label.dev_attr.attr,
- NULL
+static const struct attribute *hwmon_cputemp[4][3] = {
+ {
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_label.dev_attr.attr,
+ NULL
+ },
+ {
+ &sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_label.dev_attr.attr,
+ NULL
+ },
+ {
+ &sensor_dev_attr_temp3_input.dev_attr.attr,
+ &sensor_dev_attr_temp3_label.dev_attr.attr,
+ NULL
+ },
+ {
+ &sensor_dev_attr_temp4_input.dev_attr.attr,
+ &sensor_dev_attr_temp4_label.dev_attr.attr,
+ NULL
+ }
};
-static const struct attribute *hwmon_cputemp2[] = {
- &sensor_dev_attr_temp2_input.dev_attr.attr,
- &sensor_dev_attr_temp2_label.dev_attr.attr,
- NULL
-};
-
-static ssize_t cpu0_temp_label(struct device *dev,
+static ssize_t cpu_temp_label(struct device *dev,
struct device_attribute *attr, char *buf)
{
- return sprintf(buf, "CPU 0 Temperature\n");
+ int id = (to_sensor_dev_attr(attr))->index - 1;
+ return sprintf(buf, "CPU %d Temperature\n", id);
}
-static ssize_t cpu1_temp_label(struct device *dev,
+static ssize_t get_cpu_temp(struct device *dev,
struct device_attribute *attr, char *buf)
{
- return sprintf(buf, "CPU 1 Temperature\n");
-}
-
-static ssize_t get_cpu0_temp(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- int value = loongson3_cpu_temp(0);
- return sprintf(buf, "%d\n", value);
-}
-
-static ssize_t get_cpu1_temp(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- int value = loongson3_cpu_temp(1);
+ int id = (to_sensor_dev_attr(attr))->index - 1;
+ int value = loongson3_cpu_temp(id);
return sprintf(buf, "%d\n", value);
}
static int create_sysfs_cputemp_files(struct kobject *kobj)
{
- int ret;
+ int i, ret = 0;
- ret = sysfs_create_files(kobj, hwmon_cputemp1);
- if (ret)
- goto sysfs_create_temp1_fail;
+ for (i=0; i<nr_packages; i++)
+ ret = sysfs_create_files(kobj, hwmon_cputemp[i]);
- if (loongson_sysconf.nr_cpus <= loongson_sysconf.cores_per_package)
- return 0;
-
- ret = sysfs_create_files(kobj, hwmon_cputemp2);
- if (ret)
- goto sysfs_create_temp2_fail;
-
- return 0;
-
-sysfs_create_temp2_fail:
- sysfs_remove_files(kobj, hwmon_cputemp1);
-
-sysfs_create_temp1_fail:
- return -1;
+ return ret;
}
static void remove_sysfs_cputemp_files(struct kobject *kobj)
{
- sysfs_remove_files(&cpu_hwmon_dev->kobj, hwmon_cputemp1);
+ int i;
- if (loongson_sysconf.nr_cpus > loongson_sysconf.cores_per_package)
- sysfs_remove_files(&cpu_hwmon_dev->kobj, hwmon_cputemp2);
+ for (i=0; i<nr_packages; i++)
+ sysfs_remove_files(kobj, hwmon_cputemp[i]);
}
#define CPU_THERMAL_THRESHOLD 90000
@@ -140,8 +136,15 @@
static void do_thermal_timer(struct work_struct *work)
{
- int value = loongson3_cpu_temp(0);
- if (value <= CPU_THERMAL_THRESHOLD)
+ int i, value, temp_max = 0;
+
+ for (i=0; i<nr_packages; i++) {
+ value = loongson3_cpu_temp(i);
+ if (value > temp_max)
+ temp_max = value;
+ }
+
+ if (temp_max <= CPU_THERMAL_THRESHOLD)
schedule_delayed_work(&thermal_work, msecs_to_jiffies(5000));
else
orderly_poweroff(true);
@@ -160,6 +163,9 @@
goto fail_hwmon_device_register;
}
+ nr_packages = loongson_sysconf.nr_cpus /
+ loongson_sysconf.cores_per_package;
+
ret = sysfs_create_group(&cpu_hwmon_dev->kobj,
&cpu_hwmon_attribute_group);
if (ret) {
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index b048607..80b8795 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -675,6 +675,7 @@
tristate "PEAQ 2-in-1 WMI hotkey driver"
depends on ACPI_WMI
depends on INPUT
+ select INPUT_POLLDEV
help
Say Y here if you want to support WMI-based hotkeys on PEAQ 2-in-1s.
diff --git a/drivers/platform/x86/alienware-wmi.c b/drivers/platform/x86/alienware-wmi.c
index 9866fec..0831b42 100644
--- a/drivers/platform/x86/alienware-wmi.c
+++ b/drivers/platform/x86/alienware-wmi.c
@@ -604,7 +604,7 @@
NULL,
};
-static struct attribute_group hdmi_attribute_group = {
+static const struct attribute_group hdmi_attribute_group = {
.name = "hdmi",
.attrs = hdmi_attrs,
};
@@ -660,7 +660,7 @@
NULL,
};
-static struct attribute_group amplifier_attribute_group = {
+static const struct attribute_group amplifier_attribute_group = {
.name = "amplifier",
.attrs = amplifier_attrs,
};
@@ -741,7 +741,7 @@
NULL,
};
-static struct attribute_group deepsleep_attribute_group = {
+static const struct attribute_group deepsleep_attribute_group = {
.name = "deepsleep",
.attrs = deepsleep_attrs,
};
diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
index 6c7d860..709e3a6 100644
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -1433,7 +1433,7 @@
return ok ? attr->mode : 0;
}
-static struct attribute_group hwmon_attribute_group = {
+static const struct attribute_group hwmon_attribute_group = {
.is_visible = asus_hwmon_sysfs_is_visible,
.attrs = hwmon_attributes
};
@@ -1821,7 +1821,7 @@
return ok ? attr->mode : 0;
}
-static struct attribute_group platform_attribute_group = {
+static const struct attribute_group platform_attribute_group = {
.is_visible = asus_sysfs_is_visible,
.attrs = platform_attributes
};
diff --git a/drivers/platform/x86/compal-laptop.c b/drivers/platform/x86/compal-laptop.c
index e1c2b6d..a8e4a53 100644
--- a/drivers/platform/x86/compal-laptop.c
+++ b/drivers/platform/x86/compal-laptop.c
@@ -718,7 +718,7 @@
&dev_attr_wake_up_mouse.attr,
NULL
};
-static struct attribute_group compal_platform_attr_group = {
+static const struct attribute_group compal_platform_attr_group = {
.attrs = compal_platform_attrs
};
diff --git a/drivers/platform/x86/dell-wmi.c b/drivers/platform/x86/dell-wmi.c
index f897846..dad8f4a 100644
--- a/drivers/platform/x86/dell-wmi.c
+++ b/drivers/platform/x86/dell-wmi.c
@@ -626,7 +626,7 @@
* WMI Interface Version 8 4 <version>
* WMI buffer length 12 4 4096
*/
-static int __init dell_wmi_check_descriptor_buffer(void)
+static int dell_wmi_check_descriptor_buffer(void)
{
struct acpi_buffer out = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *obj;
@@ -717,9 +717,15 @@
static int dell_wmi_probe(struct wmi_device *wdev)
{
+ int err;
+
struct dell_wmi_priv *priv = devm_kzalloc(
&wdev->dev, sizeof(struct dell_wmi_priv), GFP_KERNEL);
+ err = dell_wmi_check_descriptor_buffer();
+ if (err)
+ return err;
+
dev_set_drvdata(&wdev->dev, priv);
return dell_wmi_input_setup(wdev);
@@ -749,10 +755,6 @@
{
int err;
- err = dell_wmi_check_descriptor_buffer();
- if (err)
- return err;
-
dmi_check_system(dell_wmi_smbios_list);
if (wmi_requires_smbios_request) {
diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c
index c1a8528..85de30f 100644
--- a/drivers/platform/x86/fujitsu-laptop.c
+++ b/drivers/platform/x86/fujitsu-laptop.c
@@ -317,7 +317,7 @@
NULL
};
-static struct attribute_group fujitsu_pf_attribute_group = {
+static const struct attribute_group fujitsu_pf_attribute_group = {
.attrs = fujitsu_pf_attributes
};
@@ -695,6 +695,9 @@
if (call_fext_func(device,
FUNC_LEDS, 0x0, 0x0, 0x0) & LOGOLAMP_POWERON) {
led = devm_kzalloc(&device->dev, sizeof(*led), GFP_KERNEL);
+ if (!led)
+ return -ENOMEM;
+
led->name = "fujitsu::logolamp";
led->brightness_set_blocking = logolamp_set;
led->brightness_get = logolamp_get;
@@ -707,6 +710,9 @@
FUNC_LEDS, 0x0, 0x0, 0x0) & KEYBOARD_LAMPS) &&
(call_fext_func(device, FUNC_BUTTONS, 0x0, 0x0, 0x0) == 0x0)) {
led = devm_kzalloc(&device->dev, sizeof(*led), GFP_KERNEL);
+ if (!led)
+ return -ENOMEM;
+
led->name = "fujitsu::kblamps";
led->brightness_set_blocking = kblamps_set;
led->brightness_get = kblamps_get;
@@ -723,6 +729,9 @@
*/
if (call_fext_func(device, FUNC_BUTTONS, 0x0, 0x0, 0x0) & BIT(24)) {
led = devm_kzalloc(&device->dev, sizeof(*led), GFP_KERNEL);
+ if (!led)
+ return -ENOMEM;
+
led->name = "fujitsu::radio_led";
led->brightness_set_blocking = radio_led_set;
led->brightness_get = radio_led_get;
@@ -741,6 +750,9 @@
(call_fext_func(device,
FUNC_LEDS, 0x2, ECO_LED, 0x0) != UNSUPPORTED_CMD)) {
led = devm_kzalloc(&device->dev, sizeof(*led), GFP_KERNEL);
+ if (!led)
+ return -ENOMEM;
+
led->name = "fujitsu::eco_led";
led->brightness_set_blocking = eco_led_set;
led->brightness_get = eco_led_get;
diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c
index 527e5d9..603fc60 100644
--- a/drivers/platform/x86/ideapad-laptop.c
+++ b/drivers/platform/x86/ideapad-laptop.c
@@ -909,17 +909,94 @@
},
},
{
+ .ident = "Lenovo V310-14IKB",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo V310-14IKB"),
+ },
+ },
+ {
+ .ident = "Lenovo V310-14ISK",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo V310-14ISK"),
+ },
+ },
+ {
+ .ident = "Lenovo V310-15IKB",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo V310-15IKB"),
+ },
+ },
+ {
.ident = "Lenovo V310-15ISK",
.matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
- DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo V310-15ISK"),
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo V310-15ISK"),
+ },
+ },
+ {
+ .ident = "Lenovo V510-15IKB",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo V510-15IKB"),
+ },
+ },
+ {
+ .ident = "Lenovo ideapad 300-15IBR",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad 300-15IBR"),
+ },
+ },
+ {
+ .ident = "Lenovo ideapad 300-15IKB",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad 300-15IKB"),
+ },
+ },
+ {
+ .ident = "Lenovo ideapad 300S-11IBR",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad 300S-11BR"),
+ },
+ },
+ {
+ .ident = "Lenovo ideapad 310-15ABR",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad 310-15ABR"),
+ },
+ },
+ {
+ .ident = "Lenovo ideapad 310-15IAP",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad 310-15IAP"),
},
},
{
.ident = "Lenovo ideapad 310-15IKB",
.matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
- DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad 310-15IKB"),
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad 310-15IKB"),
+ },
+ },
+ {
+ .ident = "Lenovo ideapad 310-15ISK",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad 310-15ISK"),
+ },
+ },
+ {
+ .ident = "Lenovo ideapad Y700-14ISK",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad Y700-14ISK"),
},
},
{
diff --git a/drivers/platform/x86/intel-vbtn.c b/drivers/platform/x86/intel-vbtn.c
index 61f1063..4809267 100644
--- a/drivers/platform/x86/intel-vbtn.c
+++ b/drivers/platform/x86/intel-vbtn.c
@@ -36,8 +36,8 @@
/* In theory, these are HID usages. */
static const struct key_entry intel_vbtn_keymap[] = {
- { KE_IGNORE, 0xC0, { KEY_POWER } }, /* power key press */
- { KE_KEY, 0xC1, { KEY_POWER } }, /* power key release */
+ { KE_KEY, 0xC0, { KEY_POWER } }, /* power key press */
+ { KE_IGNORE, 0xC1, { KEY_POWER } }, /* power key release */
{ KE_KEY, 0xC4, { KEY_VOLUMEUP } }, /* volume-up key press */
{ KE_IGNORE, 0xC5, { KEY_VOLUMEUP } }, /* volume-up key release */
{ KE_KEY, 0xC6, { KEY_VOLUMEDOWN } }, /* volume-down key press */
diff --git a/drivers/platform/x86/intel_telemetry_debugfs.c b/drivers/platform/x86/intel_telemetry_debugfs.c
index 4cc2f4e..cd21df9 100644
--- a/drivers/platform/x86/intel_telemetry_debugfs.c
+++ b/drivers/platform/x86/intel_telemetry_debugfs.c
@@ -710,6 +710,24 @@
.release = single_release,
};
+static int telem_s0ix_res_get(void *data, u64 *val)
+{
+ u64 s0ix_total_res;
+ int ret;
+
+ ret = intel_pmc_s0ix_counter_read(&s0ix_total_res);
+ if (ret) {
+ pr_err("Failed to read S0ix residency");
+ return ret;
+ }
+
+ *val = s0ix_total_res;
+
+ return 0;
+}
+
+DEFINE_DEBUGFS_ATTRIBUTE(telem_s0ix_fops, telem_s0ix_res_get, NULL, "%llu\n");
+
static int telem_pss_trc_verb_show(struct seq_file *s, void *unused)
{
u32 verbosity;
@@ -938,7 +956,7 @@
static int __init telemetry_debugfs_init(void)
{
const struct x86_cpu_id *id;
- int err = -ENOMEM;
+ int err;
struct dentry *f;
/* Only APL supported for now */
@@ -958,11 +976,10 @@
register_pm_notifier(&pm_notifier);
+ err = -ENOMEM;
debugfs_conf->telemetry_dbg_dir = debugfs_create_dir("telemetry", NULL);
- if (!debugfs_conf->telemetry_dbg_dir) {
- err = -ENOMEM;
+ if (!debugfs_conf->telemetry_dbg_dir)
goto out_pm;
- }
f = debugfs_create_file("pss_info", S_IFREG | S_IRUGO,
debugfs_conf->telemetry_dbg_dir, NULL,
@@ -988,6 +1005,14 @@
goto out;
}
+ f = debugfs_create_file("s0ix_residency_usec", S_IFREG | S_IRUGO,
+ debugfs_conf->telemetry_dbg_dir,
+ NULL, &telem_s0ix_fops);
+ if (!f) {
+ pr_err("s0ix_residency_usec debugfs register failed\n");
+ goto out;
+ }
+
f = debugfs_create_file("pss_trace_verbosity", S_IFREG | S_IRUGO,
debugfs_conf->telemetry_dbg_dir, NULL,
&telem_pss_trc_verb_ops);
diff --git a/drivers/platform/x86/panasonic-laptop.c b/drivers/platform/x86/panasonic-laptop.c
index 76b0a58..5c39b32 100644
--- a/drivers/platform/x86/panasonic-laptop.c
+++ b/drivers/platform/x86/panasonic-laptop.c
@@ -437,7 +437,7 @@
NULL,
};
-static struct attribute_group pcc_attr_group = {
+static const struct attribute_group pcc_attr_group = {
.name = NULL, /* put in device directory */
.attrs = pcc_sysfs_entries,
};
diff --git a/drivers/platform/x86/peaq-wmi.c b/drivers/platform/x86/peaq-wmi.c
index ca75b4dc..77d1f90 100644
--- a/drivers/platform/x86/peaq-wmi.c
+++ b/drivers/platform/x86/peaq-wmi.c
@@ -51,7 +51,7 @@
return;
}
- if (peaq_ignore_events_counter && --peaq_ignore_events_counter > 0)
+ if (peaq_ignore_events_counter && --peaq_ignore_events_counter >= 0)
return;
if (obj.integer.value) {
diff --git a/drivers/platform/x86/samsung-laptop.c b/drivers/platform/x86/samsung-laptop.c
index 5c4dfe4..0c703fe 100644
--- a/drivers/platform/x86/samsung-laptop.c
+++ b/drivers/platform/x86/samsung-laptop.c
@@ -1232,7 +1232,7 @@
return ok ? attr->mode : 0;
}
-static struct attribute_group platform_attribute_group = {
+static const struct attribute_group platform_attribute_group = {
.is_visible = samsung_sysfs_is_visible,
.attrs = platform_attributes
};
diff --git a/drivers/platform/x86/silead_dmi.c b/drivers/platform/x86/silead_dmi.c
index 3cd3bdf..1157a7b 100644
--- a/drivers/platform/x86/silead_dmi.c
+++ b/drivers/platform/x86/silead_dmi.c
@@ -122,6 +122,20 @@
.properties = pov_mobii_wintab_p800w_props,
};
+static const struct property_entry itworks_tw891_props[] = {
+ PROPERTY_ENTRY_U32("touchscreen-size-x", 1600),
+ PROPERTY_ENTRY_U32("touchscreen-size-y", 890),
+ PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
+ PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
+ PROPERTY_ENTRY_STRING("firmware-name", "gsl3670-itworks-tw891.fw"),
+ { }
+};
+
+static const struct silead_ts_dmi_data itworks_tw891_data = {
+ .acpi_name = "MSSL1680:00",
+ .properties = itworks_tw891_props,
+};
+
static const struct dmi_system_id silead_ts_dmi_table[] = {
{
/* CUBE iwork8 Air */
@@ -160,6 +174,16 @@
},
},
{
+ /* Ployer Momo7w (same hardware as the Trekstor ST70416-6) */
+ .driver_data = (void *)&surftab_wintron70_st70416_6_data,
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Shenzhen PLOYER"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MOMO7W"),
+ /* Exact match, different versions need different fw */
+ DMI_MATCH(DMI_BIOS_VERSION, "MOMO.G.WI71C.MABMRBA02"),
+ },
+ },
+ {
/* GP-electronic T701 */
.driver_data = (void *)&gp_electronic_t701_data,
.matches = {
@@ -187,6 +211,14 @@
DMI_MATCH(DMI_BIOS_DATE, "08/22/2014"),
},
},
+ {
+ /* I.T.Works TW891 */
+ .driver_data = (void *)&itworks_tw891_data,
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "To be filled by O.E.M."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TW891"),
+ },
+ },
{ },
};
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index 88f9f79..bb1dcd7 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -2419,7 +2419,7 @@
return exists ? attr->mode : 0;
}
-static struct attribute_group toshiba_attr_group = {
+static const struct attribute_group toshiba_attr_group = {
.is_visible = toshiba_sysfs_is_visible,
.attrs = toshiba_attributes,
};
diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c
index 1a764e3..e32ba57 100644
--- a/drivers/platform/x86/wmi.c
+++ b/drivers/platform/x86/wmi.c
@@ -1252,12 +1252,12 @@
return 0;
-err_unreg_class:
- class_unregister(&wmi_bus_class);
-
err_unreg_bus:
bus_unregister(&wmi_bus_type);
+err_unreg_class:
+ class_unregister(&wmi_bus_class);
+
return error;
}
diff --git a/drivers/power/supply/twl4030_charger.c b/drivers/power/supply/twl4030_charger.c
index 3de802f..9dff1b4 100644
--- a/drivers/power/supply/twl4030_charger.c
+++ b/drivers/power/supply/twl4030_charger.c
@@ -980,10 +980,37 @@
platform_set_drvdata(pdev, bci);
+ INIT_WORK(&bci->work, twl4030_bci_usb_work);
+ INIT_DELAYED_WORK(&bci->current_worker, twl4030_current_worker);
+
bci->channel_vac = devm_iio_channel_get(&pdev->dev, "vac");
if (IS_ERR(bci->channel_vac)) {
+ ret = PTR_ERR(bci->channel_vac);
+ if (ret == -EPROBE_DEFER)
+ return ret; /* iio not ready */
+ dev_warn(&pdev->dev, "could not request vac iio channel (%d)",
+ ret);
bci->channel_vac = NULL;
- dev_warn(&pdev->dev, "could not request vac iio channel");
+ }
+
+ if (bci->dev->of_node) {
+ struct device_node *phynode;
+
+ phynode = of_find_compatible_node(bci->dev->of_node->parent,
+ NULL, "ti,twl4030-usb");
+ if (phynode) {
+ bci->usb_nb.notifier_call = twl4030_bci_usb_ncb;
+ bci->transceiver = devm_usb_get_phy_by_node(
+ bci->dev, phynode, &bci->usb_nb);
+ if (IS_ERR(bci->transceiver)) {
+ ret = PTR_ERR(bci->transceiver);
+ if (ret == -EPROBE_DEFER)
+ return ret; /* phy not ready */
+ dev_warn(&pdev->dev, "could not request transceiver (%d)",
+ ret);
+ bci->transceiver = NULL;
+ }
+ }
}
bci->ac = devm_power_supply_register(&pdev->dev, &twl4030_bci_ac_desc,
@@ -1019,20 +1046,6 @@
return ret;
}
- INIT_WORK(&bci->work, twl4030_bci_usb_work);
- INIT_DELAYED_WORK(&bci->current_worker, twl4030_current_worker);
-
- bci->usb_nb.notifier_call = twl4030_bci_usb_ncb;
- if (bci->dev->of_node) {
- struct device_node *phynode;
-
- phynode = of_find_compatible_node(bci->dev->of_node->parent,
- NULL, "ti,twl4030-usb");
- if (phynode)
- bci->transceiver = devm_usb_get_phy_by_node(
- bci->dev, phynode, &bci->usb_nb);
- }
-
/* Enable interrupts now. */
reg = ~(u32)(TWL4030_ICHGLOW | TWL4030_ICHGEOC | TWL4030_TBATOR2 |
TWL4030_TBATOR1 | TWL4030_BATSTS);
diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c
index a0860b3..1581f6a 100644
--- a/drivers/pwm/core.c
+++ b/drivers/pwm/core.c
@@ -678,7 +678,9 @@
pc = of_node_to_pwmchip(args.np);
if (IS_ERR(pc)) {
- pr_err("%s(): PWM chip not found\n", __func__);
+ if (PTR_ERR(pc) != -EPROBE_DEFER)
+ pr_err("%s(): PWM chip not found\n", __func__);
+
pwm = ERR_CAST(pc);
goto put;
}
diff --git a/drivers/pwm/pwm-bfin.c b/drivers/pwm/pwm-bfin.c
index d2ed0a2..a9a8813 100644
--- a/drivers/pwm/pwm-bfin.c
+++ b/drivers/pwm/pwm-bfin.c
@@ -118,10 +118,8 @@
int ret;
pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL);
- if (!pwm) {
- dev_err(&pdev->dev, "failed to allocate memory\n");
+ if (!pwm)
return -ENOMEM;
- }
platform_set_drvdata(pdev, pwm);
diff --git a/drivers/pwm/pwm-cros-ec.c b/drivers/pwm/pwm-cros-ec.c
index f6ca4e8..9c13694 100644
--- a/drivers/pwm/pwm-cros-ec.c
+++ b/drivers/pwm/pwm-cros-ec.c
@@ -75,8 +75,8 @@
msg->version = 0;
msg->command = EC_CMD_PWM_GET_DUTY;
- msg->insize = sizeof(*params);
- msg->outsize = sizeof(*resp);
+ msg->insize = sizeof(*resp);
+ msg->outsize = sizeof(*params);
params->pwm_type = EC_PWM_TYPE_GENERIC;
params->index = index;
diff --git a/drivers/pwm/pwm-hibvt.c b/drivers/pwm/pwm-hibvt.c
index d0e8f85..8dadc58 100644
--- a/drivers/pwm/pwm-hibvt.c
+++ b/drivers/pwm/pwm-hibvt.c
@@ -165,7 +165,7 @@
return 0;
}
-static struct pwm_ops hibvt_pwm_ops = {
+static const struct pwm_ops hibvt_pwm_ops = {
.get_state = hibvt_pwm_get_state,
.apply = hibvt_pwm_apply,
diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
index 045ef9f..cb845ed 100644
--- a/drivers/pwm/pwm-meson.c
+++ b/drivers/pwm/pwm-meson.c
@@ -103,6 +103,7 @@
struct meson_pwm_data {
const char * const *parent_names;
+ unsigned int num_parents;
};
struct meson_pwm {
@@ -162,7 +163,8 @@
unsigned int duty, unsigned int period)
{
unsigned int pre_div, cnt, duty_cnt;
- unsigned long fin_freq = -1, fin_ns;
+ unsigned long fin_freq = -1;
+ u64 fin_ps;
if (~(meson->inverter_mask >> id) & 0x1)
duty = period - duty;
@@ -178,13 +180,15 @@
}
dev_dbg(meson->chip.dev, "fin_freq: %lu Hz\n", fin_freq);
- fin_ns = NSEC_PER_SEC / fin_freq;
+ fin_ps = (u64)NSEC_PER_SEC * 1000;
+ do_div(fin_ps, fin_freq);
/* Calc pre_div with the period */
for (pre_div = 0; pre_div < MISC_CLK_DIV_MASK; pre_div++) {
- cnt = DIV_ROUND_CLOSEST(period, fin_ns * (pre_div + 1));
- dev_dbg(meson->chip.dev, "fin_ns=%lu pre_div=%u cnt=%u\n",
- fin_ns, pre_div, cnt);
+ cnt = DIV_ROUND_CLOSEST_ULL((u64)period * 1000,
+ fin_ps * (pre_div + 1));
+ dev_dbg(meson->chip.dev, "fin_ps=%llu pre_div=%u cnt=%u\n",
+ fin_ps, pre_div, cnt);
if (cnt <= 0xffff)
break;
}
@@ -207,7 +211,8 @@
channel->lo = cnt;
} else {
/* Then check is we can have the duty with the same pre_div */
- duty_cnt = DIV_ROUND_CLOSEST(duty, fin_ns * (pre_div + 1));
+ duty_cnt = DIV_ROUND_CLOSEST_ULL((u64)duty * 1000,
+ fin_ps * (pre_div + 1));
if (duty_cnt > 0xffff) {
dev_err(meson->chip.dev, "unable to get duty cycle\n");
return -EINVAL;
@@ -381,6 +386,7 @@
static const struct meson_pwm_data pwm_meson8b_data = {
.parent_names = pwm_meson8b_parent_names,
+ .num_parents = ARRAY_SIZE(pwm_meson8b_parent_names),
};
static const char * const pwm_gxbb_parent_names[] = {
@@ -389,11 +395,35 @@
static const struct meson_pwm_data pwm_gxbb_data = {
.parent_names = pwm_gxbb_parent_names,
+ .num_parents = ARRAY_SIZE(pwm_gxbb_parent_names),
+};
+
+/*
+ * Only the 2 first inputs of the GXBB AO PWMs are valid
+ * The last 2 are grounded
+ */
+static const char * const pwm_gxbb_ao_parent_names[] = {
+ "xtal", "clk81"
+};
+
+static const struct meson_pwm_data pwm_gxbb_ao_data = {
+ .parent_names = pwm_gxbb_ao_parent_names,
+ .num_parents = ARRAY_SIZE(pwm_gxbb_ao_parent_names),
};
static const struct of_device_id meson_pwm_matches[] = {
- { .compatible = "amlogic,meson8b-pwm", .data = &pwm_meson8b_data },
- { .compatible = "amlogic,meson-gxbb-pwm", .data = &pwm_gxbb_data },
+ {
+ .compatible = "amlogic,meson8b-pwm",
+ .data = &pwm_meson8b_data
+ },
+ {
+ .compatible = "amlogic,meson-gxbb-pwm",
+ .data = &pwm_gxbb_data
+ },
+ {
+ .compatible = "amlogic,meson-gxbb-ao-pwm",
+ .data = &pwm_gxbb_ao_data
+ },
{},
};
MODULE_DEVICE_TABLE(of, meson_pwm_matches);
@@ -417,7 +447,7 @@
init.ops = &clk_mux_ops;
init.flags = CLK_IS_BASIC;
init.parent_names = meson->data->parent_names;
- init.num_parents = 1 << MISC_CLK_SEL_WIDTH;
+ init.num_parents = meson->data->num_parents;
channel->mux.reg = meson->base + REG_MISC_AB;
channel->mux.shift = mux_reg_shifts[i];
diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c
index 1284ffa..6d23f1d 100644
--- a/drivers/pwm/pwm-sun4i.c
+++ b/drivers/pwm/pwm-sun4i.c
@@ -8,8 +8,10 @@
#include <linux/bitops.h>
#include <linux/clk.h>
+#include <linux/delay.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/jiffies.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
@@ -44,6 +46,10 @@
#define PWM_DTY_MASK GENMASK(15, 0)
+#define PWM_REG_PRD(reg) ((((reg) >> 16) & PWM_PRD_MASK) + 1)
+#define PWM_REG_DTY(reg) ((reg) & PWM_DTY_MASK)
+#define PWM_REG_PRESCAL(reg, chan) (((reg) >> ((chan) * PWMCH_OFFSET)) & PWM_PRESCAL_MASK)
+
#define BIT_CH(bit, chan) ((bit) << ((chan) * PWMCH_OFFSET))
static const u32 prescaler_table[] = {
@@ -77,6 +83,8 @@
void __iomem *base;
spinlock_t ctrl_lock;
const struct sun4i_pwm_data *data;
+ unsigned long next_period[2];
+ bool needs_delay[2];
};
static inline struct sun4i_pwm_chip *to_sun4i_pwm_chip(struct pwm_chip *chip)
@@ -96,26 +104,65 @@
writel(val, chip->base + offset);
}
-static int sun4i_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
- int duty_ns, int period_ns)
+static void sun4i_pwm_get_state(struct pwm_chip *chip,
+ struct pwm_device *pwm,
+ struct pwm_state *state)
{
struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip);
- u32 prd, dty, val, clk_gate;
+ u64 clk_rate, tmp;
+ u32 val;
+ unsigned int prescaler;
+
+ clk_rate = clk_get_rate(sun4i_pwm->clk);
+
+ val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
+
+ if ((val == PWM_PRESCAL_MASK) && sun4i_pwm->data->has_prescaler_bypass)
+ prescaler = 1;
+ else
+ prescaler = prescaler_table[PWM_REG_PRESCAL(val, pwm->hwpwm)];
+
+ if (prescaler == 0)
+ return;
+
+ if (val & BIT_CH(PWM_ACT_STATE, pwm->hwpwm))
+ state->polarity = PWM_POLARITY_NORMAL;
+ else
+ state->polarity = PWM_POLARITY_INVERSED;
+
+ if (val & BIT_CH(PWM_CLK_GATING | PWM_EN, pwm->hwpwm))
+ state->enabled = true;
+ else
+ state->enabled = false;
+
+ val = sun4i_pwm_readl(sun4i_pwm, PWM_CH_PRD(pwm->hwpwm));
+
+ tmp = prescaler * NSEC_PER_SEC * PWM_REG_DTY(val);
+ state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, clk_rate);
+
+ tmp = prescaler * NSEC_PER_SEC * PWM_REG_PRD(val);
+ state->period = DIV_ROUND_CLOSEST_ULL(tmp, clk_rate);
+}
+
+static int sun4i_pwm_calculate(struct sun4i_pwm_chip *sun4i_pwm,
+ struct pwm_state *state,
+ u32 *dty, u32 *prd, unsigned int *prsclr)
+{
u64 clk_rate, div = 0;
- unsigned int prescaler = 0;
- int err;
+ unsigned int pval, prescaler = 0;
clk_rate = clk_get_rate(sun4i_pwm->clk);
if (sun4i_pwm->data->has_prescaler_bypass) {
/* First, test without any prescaler when available */
prescaler = PWM_PRESCAL_MASK;
+ pval = 1;
/*
* When not using any prescaler, the clock period in nanoseconds
* is not an integer so round it half up instead of
* truncating to get less surprising values.
*/
- div = clk_rate * period_ns + NSEC_PER_SEC / 2;
+ div = clk_rate * state->period + NSEC_PER_SEC / 2;
do_div(div, NSEC_PER_SEC);
if (div - 1 > PWM_PRD_MASK)
prescaler = 0;
@@ -126,137 +173,141 @@
for (prescaler = 0; prescaler < PWM_PRESCAL_MASK; prescaler++) {
if (!prescaler_table[prescaler])
continue;
+ pval = prescaler_table[prescaler];
div = clk_rate;
- do_div(div, prescaler_table[prescaler]);
- div = div * period_ns;
+ do_div(div, pval);
+ div = div * state->period;
do_div(div, NSEC_PER_SEC);
if (div - 1 <= PWM_PRD_MASK)
break;
}
- if (div - 1 > PWM_PRD_MASK) {
- dev_err(chip->dev, "period exceeds the maximum value\n");
+ if (div - 1 > PWM_PRD_MASK)
return -EINVAL;
+ }
+
+ *prd = div;
+ div *= state->duty_cycle;
+ do_div(div, state->period);
+ *dty = div;
+ *prsclr = prescaler;
+
+ div = (u64)pval * NSEC_PER_SEC * *prd;
+ state->period = DIV_ROUND_CLOSEST_ULL(div, clk_rate);
+
+ div = (u64)pval * NSEC_PER_SEC * *dty;
+ state->duty_cycle = DIV_ROUND_CLOSEST_ULL(div, clk_rate);
+
+ return 0;
+}
+
+static int sun4i_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+ struct pwm_state *state)
+{
+ struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip);
+ struct pwm_state cstate;
+ u32 ctrl;
+ int ret;
+ unsigned int delay_us;
+ unsigned long now;
+
+ pwm_get_state(pwm, &cstate);
+
+ if (!cstate.enabled) {
+ ret = clk_prepare_enable(sun4i_pwm->clk);
+ if (ret) {
+ dev_err(chip->dev, "failed to enable PWM clock\n");
+ return ret;
}
}
- prd = div;
- div *= duty_ns;
- do_div(div, period_ns);
- dty = div;
-
- err = clk_prepare_enable(sun4i_pwm->clk);
- if (err) {
- dev_err(chip->dev, "failed to enable PWM clock\n");
- return err;
- }
-
spin_lock(&sun4i_pwm->ctrl_lock);
- val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
+ ctrl = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
- if (sun4i_pwm->data->has_rdy && (val & PWM_RDY(pwm->hwpwm))) {
- spin_unlock(&sun4i_pwm->ctrl_lock);
- clk_disable_unprepare(sun4i_pwm->clk);
- return -EBUSY;
+ if ((cstate.period != state->period) ||
+ (cstate.duty_cycle != state->duty_cycle)) {
+ u32 period, duty, val;
+ unsigned int prescaler;
+
+ ret = sun4i_pwm_calculate(sun4i_pwm, state,
+ &duty, &period, &prescaler);
+ if (ret) {
+ dev_err(chip->dev, "period exceeds the maximum value\n");
+ spin_unlock(&sun4i_pwm->ctrl_lock);
+ if (!cstate.enabled)
+ clk_disable_unprepare(sun4i_pwm->clk);
+ return ret;
+ }
+
+ if (PWM_REG_PRESCAL(ctrl, pwm->hwpwm) != prescaler) {
+ /* Prescaler changed, the clock has to be gated */
+ ctrl &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
+ sun4i_pwm_writel(sun4i_pwm, ctrl, PWM_CTRL_REG);
+
+ ctrl &= ~BIT_CH(PWM_PRESCAL_MASK, pwm->hwpwm);
+ ctrl |= BIT_CH(prescaler, pwm->hwpwm);
+ }
+
+ val = (duty & PWM_DTY_MASK) | PWM_PRD(period);
+ sun4i_pwm_writel(sun4i_pwm, val, PWM_CH_PRD(pwm->hwpwm));
+ sun4i_pwm->next_period[pwm->hwpwm] = jiffies +
+ usecs_to_jiffies(cstate.period / 1000 + 1);
+ sun4i_pwm->needs_delay[pwm->hwpwm] = true;
}
- clk_gate = val & BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
- if (clk_gate) {
- val &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
- sun4i_pwm_writel(sun4i_pwm, val, PWM_CTRL_REG);
- }
-
- val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
- val &= ~BIT_CH(PWM_PRESCAL_MASK, pwm->hwpwm);
- val |= BIT_CH(prescaler, pwm->hwpwm);
- sun4i_pwm_writel(sun4i_pwm, val, PWM_CTRL_REG);
-
- val = (dty & PWM_DTY_MASK) | PWM_PRD(prd);
- sun4i_pwm_writel(sun4i_pwm, val, PWM_CH_PRD(pwm->hwpwm));
-
- if (clk_gate) {
- val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
- val |= clk_gate;
- sun4i_pwm_writel(sun4i_pwm, val, PWM_CTRL_REG);
- }
-
- spin_unlock(&sun4i_pwm->ctrl_lock);
- clk_disable_unprepare(sun4i_pwm->clk);
-
- return 0;
-}
-
-static int sun4i_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm,
- enum pwm_polarity polarity)
-{
- struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip);
- u32 val;
- int ret;
-
- ret = clk_prepare_enable(sun4i_pwm->clk);
- if (ret) {
- dev_err(chip->dev, "failed to enable PWM clock\n");
- return ret;
- }
-
- spin_lock(&sun4i_pwm->ctrl_lock);
- val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
-
- if (polarity != PWM_POLARITY_NORMAL)
- val &= ~BIT_CH(PWM_ACT_STATE, pwm->hwpwm);
+ if (state->polarity != PWM_POLARITY_NORMAL)
+ ctrl &= ~BIT_CH(PWM_ACT_STATE, pwm->hwpwm);
else
- val |= BIT_CH(PWM_ACT_STATE, pwm->hwpwm);
+ ctrl |= BIT_CH(PWM_ACT_STATE, pwm->hwpwm);
- sun4i_pwm_writel(sun4i_pwm, val, PWM_CTRL_REG);
-
- spin_unlock(&sun4i_pwm->ctrl_lock);
- clk_disable_unprepare(sun4i_pwm->clk);
-
- return 0;
-}
-
-static int sun4i_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
-{
- struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip);
- u32 val;
- int ret;
-
- ret = clk_prepare_enable(sun4i_pwm->clk);
- if (ret) {
- dev_err(chip->dev, "failed to enable PWM clock\n");
- return ret;
+ ctrl |= BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
+ if (state->enabled) {
+ ctrl |= BIT_CH(PWM_EN, pwm->hwpwm);
+ } else if (!sun4i_pwm->needs_delay[pwm->hwpwm]) {
+ ctrl &= ~BIT_CH(PWM_EN, pwm->hwpwm);
+ ctrl &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
}
- spin_lock(&sun4i_pwm->ctrl_lock);
- val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
- val |= BIT_CH(PWM_EN, pwm->hwpwm);
- val |= BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
- sun4i_pwm_writel(sun4i_pwm, val, PWM_CTRL_REG);
+ sun4i_pwm_writel(sun4i_pwm, ctrl, PWM_CTRL_REG);
+
spin_unlock(&sun4i_pwm->ctrl_lock);
- return 0;
-}
+ if (state->enabled)
+ return 0;
-static void sun4i_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
-{
- struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip);
- u32 val;
+ if (!sun4i_pwm->needs_delay[pwm->hwpwm]) {
+ clk_disable_unprepare(sun4i_pwm->clk);
+ return 0;
+ }
+
+ /* We need a full period to elapse before disabling the channel. */
+ now = jiffies;
+ if (sun4i_pwm->needs_delay[pwm->hwpwm] &&
+ time_before(now, sun4i_pwm->next_period[pwm->hwpwm])) {
+ delay_us = jiffies_to_usecs(sun4i_pwm->next_period[pwm->hwpwm] -
+ now);
+ if ((delay_us / 500) > MAX_UDELAY_MS)
+ msleep(delay_us / 1000 + 1);
+ else
+ usleep_range(delay_us, delay_us * 2);
+ }
+ sun4i_pwm->needs_delay[pwm->hwpwm] = false;
spin_lock(&sun4i_pwm->ctrl_lock);
- val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
- val &= ~BIT_CH(PWM_EN, pwm->hwpwm);
- val &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
- sun4i_pwm_writel(sun4i_pwm, val, PWM_CTRL_REG);
+ ctrl = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
+ ctrl &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
+ ctrl &= ~BIT_CH(PWM_EN, pwm->hwpwm);
+ sun4i_pwm_writel(sun4i_pwm, ctrl, PWM_CTRL_REG);
spin_unlock(&sun4i_pwm->ctrl_lock);
clk_disable_unprepare(sun4i_pwm->clk);
+
+ return 0;
}
static const struct pwm_ops sun4i_pwm_ops = {
- .config = sun4i_pwm_config,
- .set_polarity = sun4i_pwm_set_polarity,
- .enable = sun4i_pwm_enable,
- .disable = sun4i_pwm_disable,
+ .apply = sun4i_pwm_apply,
+ .get_state = sun4i_pwm_get_state,
.owner = THIS_MODULE,
};
@@ -316,8 +367,7 @@
{
struct sun4i_pwm_chip *pwm;
struct resource *res;
- u32 val;
- int i, ret;
+ int ret;
const struct of_device_id *match;
match = of_match_device(sun4i_pwm_dt_ids, &pdev->dev);
@@ -353,24 +403,7 @@
platform_set_drvdata(pdev, pwm);
- ret = clk_prepare_enable(pwm->clk);
- if (ret) {
- dev_err(&pdev->dev, "failed to enable PWM clock\n");
- goto clk_error;
- }
-
- val = sun4i_pwm_readl(pwm, PWM_CTRL_REG);
- for (i = 0; i < pwm->chip.npwm; i++)
- if (!(val & BIT_CH(PWM_ACT_STATE, i)))
- pwm_set_polarity(&pwm->chip.pwms[i],
- PWM_POLARITY_INVERSED);
- clk_disable_unprepare(pwm->clk);
-
return 0;
-
-clk_error:
- pwmchip_remove(&pwm->chip);
- return ret;
}
static int sun4i_pwm_remove(struct platform_device *pdev)
diff --git a/drivers/pwm/pwm-tegra.c b/drivers/pwm/pwm-tegra.c
index 8c6ed55..e9b33f0 100644
--- a/drivers/pwm/pwm-tegra.c
+++ b/drivers/pwm/pwm-tegra.c
@@ -41,6 +41,9 @@
struct tegra_pwm_soc {
unsigned int num_channels;
+
+ /* Maximum IP frequency for given SoCs */
+ unsigned long max_frequency;
};
struct tegra_pwm_chip {
@@ -201,7 +204,18 @@
if (IS_ERR(pwm->clk))
return PTR_ERR(pwm->clk);
- /* Read PWM clock rate from source */
+ /* Set maximum frequency of the IP */
+ ret = clk_set_rate(pwm->clk, pwm->soc->max_frequency);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to set max frequency: %d\n", ret);
+ return ret;
+ }
+
+ /*
+ * The requested and configured frequency may differ due to
+ * clock register resolutions. Get the configured frequency
+ * so that PWM period can be calculated more accurately.
+ */
pwm->clk_rate = clk_get_rate(pwm->clk);
pwm->rst = devm_reset_control_get(&pdev->dev, "pwm");
@@ -273,10 +287,12 @@
static const struct tegra_pwm_soc tegra20_pwm_soc = {
.num_channels = 4,
+ .max_frequency = 48000000UL,
};
static const struct tegra_pwm_soc tegra186_pwm_soc = {
.num_channels = 1,
+ .max_frequency = 102000000UL,
};
static const struct of_device_id tegra_pwm_of_match[] = {
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 8d3b957..72419ac 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -77,6 +77,14 @@
Say yes here to enable debugging support in the RTC framework
and individual RTC drivers.
+config RTC_NVMEM
+ bool "RTC non volatile storage support"
+ select NVMEM
+ default RTC_CLASS
+ help
+ Say yes here to add support for the non volatile (often battery
+ backed) storage present on RTCs.
+
comment "RTC interfaces"
config RTC_INTF_SYSFS
@@ -197,6 +205,17 @@
This driver can also be built as a module. If so, the module
will be called rtc-ac100.
+config RTC_DRV_BRCMSTB
+ tristate "Broadcom STB wake-timer"
+ depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
+ default ARCH_BRCMSTB || BMIPS_GENERIC
+ help
+ If you say yes here you get support for the wake-timer found on
+ Broadcom STB SoCs (BCM7xxx).
+
+ This driver can also be built as a module. If so, the module will
+ be called rtc-brcmstb-waketimer.
+
config RTC_DRV_AS3722
tristate "ams AS3722 RTC driver"
depends on MFD_AS3722
@@ -791,6 +810,14 @@
This driver can also be built as a module. If so, the module
will be called rtc-ds3232.
+config RTC_DRV_DS3232_HWMON
+ bool "HWMON support for Dallas/Maxim DS3232/DS3234"
+ depends on RTC_DRV_DS3232 && HWMON && !(RTC_DRV_DS3232=y && HWMON=m)
+ default y
+ help
+ Say Y here if you want to expose temperature sensor data on
+ rtc-ds3232
+
config RTC_DRV_PCF2127
tristate "NXP PCF2127"
depends on RTC_I2C_AND_SPI
@@ -1484,16 +1511,16 @@
This driver can also be built as a module. If so, the module
will be called armada38x-rtc.
-config RTC_DRV_GEMINI
- tristate "Gemini SoC RTC"
- depends on ARCH_GEMINI || COMPILE_TEST
+config RTC_DRV_FTRTC010
+ tristate "Faraday Technology FTRTC010 RTC"
depends on HAS_IOMEM
+ default ARCH_GEMINI
help
If you say Y here you will get support for the
- RTC found on Gemini SoC's.
+ Faraday Technolog FTRTC010 found on e.g. Gemini SoC's.
This driver can also be built as a module. If so, the module
- will be called rtc-gemini.
+ will be called rtc-ftrtc010.
config RTC_DRV_PS3
tristate "PS3 RTC"
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 13857d2..acd366b 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -15,6 +15,7 @@
rtc-core-y += rtc-efi-platform.o
endif
+rtc-core-$(CONFIG_RTC_NVMEM) += nvmem.o
rtc-core-$(CONFIG_RTC_INTF_DEV) += rtc-dev.o
rtc-core-$(CONFIG_RTC_INTF_PROC) += rtc-proc.o
rtc-core-$(CONFIG_RTC_INTF_SYSFS) += rtc-sysfs.o
@@ -36,6 +37,7 @@
obj-$(CONFIG_RTC_DRV_AT91SAM9) += rtc-at91sam9.o
obj-$(CONFIG_RTC_DRV_AU1XXX) += rtc-au1xxx.o
obj-$(CONFIG_RTC_DRV_BFIN) += rtc-bfin.o
+obj-$(CONFIG_RTC_DRV_BRCMSTB) += rtc-brcmstb-waketimer.o
obj-$(CONFIG_RTC_DRV_BQ32K) += rtc-bq32k.o
obj-$(CONFIG_RTC_DRV_BQ4802) += rtc-bq4802.o
obj-$(CONFIG_RTC_DRV_CMOS) += rtc-cmos.o
@@ -67,7 +69,7 @@
obj-$(CONFIG_RTC_DRV_EM3027) += rtc-em3027.o
obj-$(CONFIG_RTC_DRV_EP93XX) += rtc-ep93xx.o
obj-$(CONFIG_RTC_DRV_FM3130) += rtc-fm3130.o
-obj-$(CONFIG_RTC_DRV_GEMINI) += rtc-gemini.o
+obj-$(CONFIG_RTC_DRV_FTRTC010) += rtc-ftrtc010.o
obj-$(CONFIG_RTC_DRV_GENERIC) += rtc-generic.o
obj-$(CONFIG_RTC_DRV_HID_SENSOR_TIME) += rtc-hid-sensor-time.o
obj-$(CONFIG_RTC_DRV_HYM8563) += rtc-hym8563.o
diff --git a/drivers/rtc/class.c b/drivers/rtc/class.c
index 5fb43989..2ed970d 100644
--- a/drivers/rtc/class.c
+++ b/drivers/rtc/class.c
@@ -150,59 +150,19 @@
#define RTC_CLASS_DEV_PM_OPS NULL
#endif
-
-/**
- * rtc_device_register - register w/ RTC class
- * @dev: the device to register
- *
- * rtc_device_unregister() must be called when the class device is no
- * longer needed.
- *
- * Returns the pointer to the new struct class device.
- */
-struct rtc_device *rtc_device_register(const char *name, struct device *dev,
- const struct rtc_class_ops *ops,
- struct module *owner)
+/* Ensure the caller will set the id before releasing the device */
+static struct rtc_device *rtc_allocate_device(void)
{
struct rtc_device *rtc;
- struct rtc_wkalrm alrm;
- int of_id = -1, id = -1, err;
- if (dev->of_node)
- of_id = of_alias_get_id(dev->of_node, "rtc");
- else if (dev->parent && dev->parent->of_node)
- of_id = of_alias_get_id(dev->parent->of_node, "rtc");
-
- if (of_id >= 0) {
- id = ida_simple_get(&rtc_ida, of_id, of_id + 1,
- GFP_KERNEL);
- if (id < 0)
- dev_warn(dev, "/aliases ID %d not available\n",
- of_id);
- }
-
- if (id < 0) {
- id = ida_simple_get(&rtc_ida, 0, 0, GFP_KERNEL);
- if (id < 0) {
- err = id;
- goto exit;
- }
- }
-
- rtc = kzalloc(sizeof(struct rtc_device), GFP_KERNEL);
- if (rtc == NULL) {
- err = -ENOMEM;
- goto exit_ida;
- }
+ rtc = kzalloc(sizeof(*rtc), GFP_KERNEL);
+ if (!rtc)
+ return NULL;
device_initialize(&rtc->dev);
- rtc->id = id;
- rtc->ops = ops;
- rtc->owner = owner;
rtc->irq_freq = 1;
rtc->max_user_freq = 64;
- rtc->dev.parent = dev;
rtc->dev.class = rtc_class;
rtc->dev.groups = rtc_get_dev_attribute_groups();
rtc->dev.release = rtc_device_release;
@@ -224,7 +184,64 @@
rtc->pie_timer.function = rtc_pie_update_irq;
rtc->pie_enabled = 0;
- strlcpy(rtc->name, name, RTC_DEVICE_NAME_SIZE);
+ return rtc;
+}
+
+static int rtc_device_get_id(struct device *dev)
+{
+ int of_id = -1, id = -1;
+
+ if (dev->of_node)
+ of_id = of_alias_get_id(dev->of_node, "rtc");
+ else if (dev->parent && dev->parent->of_node)
+ of_id = of_alias_get_id(dev->parent->of_node, "rtc");
+
+ if (of_id >= 0) {
+ id = ida_simple_get(&rtc_ida, of_id, of_id + 1, GFP_KERNEL);
+ if (id < 0)
+ dev_warn(dev, "/aliases ID %d not available\n", of_id);
+ }
+
+ if (id < 0)
+ id = ida_simple_get(&rtc_ida, 0, 0, GFP_KERNEL);
+
+ return id;
+}
+
+/**
+ * rtc_device_register - register w/ RTC class
+ * @dev: the device to register
+ *
+ * rtc_device_unregister() must be called when the class device is no
+ * longer needed.
+ *
+ * Returns the pointer to the new struct class device.
+ */
+struct rtc_device *rtc_device_register(const char *name, struct device *dev,
+ const struct rtc_class_ops *ops,
+ struct module *owner)
+{
+ struct rtc_device *rtc;
+ struct rtc_wkalrm alrm;
+ int id, err;
+
+ id = rtc_device_get_id(dev);
+ if (id < 0) {
+ err = id;
+ goto exit;
+ }
+
+ rtc = rtc_allocate_device();
+ if (!rtc) {
+ err = -ENOMEM;
+ goto exit_ida;
+ }
+
+ rtc->id = id;
+ rtc->ops = ops;
+ rtc->owner = owner;
+ rtc->dev.parent = dev;
+
dev_set_name(&rtc->dev, "rtc%d", id);
/* Check to see if there is an ALARM already set in hw */
@@ -238,20 +255,20 @@
err = cdev_device_add(&rtc->char_dev, &rtc->dev);
if (err) {
dev_warn(&rtc->dev, "%s: failed to add char device %d:%d\n",
- rtc->name, MAJOR(rtc->dev.devt), rtc->id);
+ name, MAJOR(rtc->dev.devt), rtc->id);
/* This will free both memory and the ID */
put_device(&rtc->dev);
goto exit;
} else {
- dev_dbg(&rtc->dev, "%s: dev (%d:%d)\n", rtc->name,
+ dev_dbg(&rtc->dev, "%s: dev (%d:%d)\n", name,
MAJOR(rtc->dev.devt), rtc->id);
}
rtc_proc_add_device(rtc);
dev_info(dev, "rtc core: registered %s as %s\n",
- rtc->name, dev_name(&rtc->dev));
+ name, dev_name(&rtc->dev));
return rtc;
@@ -273,6 +290,8 @@
*/
void rtc_device_unregister(struct rtc_device *rtc)
{
+ rtc_nvmem_unregister(rtc);
+
mutex_lock(&rtc->ops_lock);
/*
* Remove innards of this RTC, then disable it, before
@@ -356,6 +375,91 @@
}
EXPORT_SYMBOL_GPL(devm_rtc_device_unregister);
+static void devm_rtc_release_device(struct device *dev, void *res)
+{
+ struct rtc_device *rtc = *(struct rtc_device **)res;
+
+ if (rtc->registered)
+ rtc_device_unregister(rtc);
+ else
+ put_device(&rtc->dev);
+}
+
+struct rtc_device *devm_rtc_allocate_device(struct device *dev)
+{
+ struct rtc_device **ptr, *rtc;
+ int id, err;
+
+ id = rtc_device_get_id(dev);
+ if (id < 0)
+ return ERR_PTR(id);
+
+ ptr = devres_alloc(devm_rtc_release_device, sizeof(*ptr), GFP_KERNEL);
+ if (!ptr) {
+ err = -ENOMEM;
+ goto exit_ida;
+ }
+
+ rtc = rtc_allocate_device();
+ if (!rtc) {
+ err = -ENOMEM;
+ goto exit_devres;
+ }
+
+ *ptr = rtc;
+ devres_add(dev, ptr);
+
+ rtc->id = id;
+ rtc->dev.parent = dev;
+ dev_set_name(&rtc->dev, "rtc%d", id);
+
+ return rtc;
+
+exit_devres:
+ devres_free(ptr);
+exit_ida:
+ ida_simple_remove(&rtc_ida, id);
+ return ERR_PTR(err);
+}
+EXPORT_SYMBOL_GPL(devm_rtc_allocate_device);
+
+int __rtc_register_device(struct module *owner, struct rtc_device *rtc)
+{
+ struct rtc_wkalrm alrm;
+ int err;
+
+ if (!rtc->ops)
+ return -EINVAL;
+
+ rtc->owner = owner;
+
+ /* Check to see if there is an ALARM already set in hw */
+ err = __rtc_read_alarm(rtc, &alrm);
+ if (!err && !rtc_valid_tm(&alrm.time))
+ rtc_initialize_alarm(rtc, &alrm);
+
+ rtc_dev_prepare(rtc);
+
+ err = cdev_device_add(&rtc->char_dev, &rtc->dev);
+ if (err)
+ dev_warn(rtc->dev.parent, "failed to add char device %d:%d\n",
+ MAJOR(rtc->dev.devt), rtc->id);
+ else
+ dev_dbg(rtc->dev.parent, "char device (%d:%d)\n",
+ MAJOR(rtc->dev.devt), rtc->id);
+
+ rtc_proc_add_device(rtc);
+
+ rtc_nvmem_register(rtc);
+
+ rtc->registered = true;
+ dev_info(rtc->dev.parent, "registered as %s\n",
+ dev_name(&rtc->dev));
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(__rtc_register_device);
+
static int __init rtc_init(void)
{
rtc_class = class_create(THIS_MODULE, "rtc");
diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c
index fc0fa75..8cec9a0 100644
--- a/drivers/rtc/interface.c
+++ b/drivers/rtc/interface.c
@@ -227,6 +227,13 @@
missing = year;
}
+ /* Can't proceed if alarm is still invalid after replacing
+ * missing fields.
+ */
+ err = rtc_valid_tm(&alarm->time);
+ if (err)
+ goto done;
+
/* with luck, no rollover is needed */
t_now = rtc_tm_to_time64(&now);
t_alm = rtc_tm_to_time64(&alarm->time);
@@ -278,9 +285,9 @@
dev_warn(&rtc->dev, "alarm rollover not handled\n");
}
-done:
err = rtc_valid_tm(&alarm->time);
+done:
if (err) {
dev_warn(&rtc->dev, "invalid alarm value: %d-%d-%d %d:%d:%d\n",
alarm->time.tm_year + 1900, alarm->time.tm_mon + 1,
diff --git a/drivers/rtc/nvmem.c b/drivers/rtc/nvmem.c
new file mode 100644
index 0000000..8567b4e
--- /dev/null
+++ b/drivers/rtc/nvmem.c
@@ -0,0 +1,113 @@
+/*
+ * RTC subsystem, nvmem interface
+ *
+ * Copyright (C) 2017 Alexandre Belloni
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/types.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/rtc.h>
+#include <linux/sysfs.h>
+
+#include "rtc-core.h"
+
+/*
+ * Deprecated ABI compatibility, this should be removed at some point
+ */
+
+static const char nvram_warning[] = "Deprecated ABI, please use nvmem";
+
+static ssize_t
+rtc_nvram_read(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct rtc_device *rtc = attr->private;
+
+ dev_warn_once(kobj_to_dev(kobj), nvram_warning);
+
+ return nvmem_device_read(rtc->nvmem, off, count, buf);
+}
+
+static ssize_t
+rtc_nvram_write(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct rtc_device *rtc = attr->private;
+
+ dev_warn_once(kobj_to_dev(kobj), nvram_warning);
+
+ return nvmem_device_write(rtc->nvmem, off, count, buf);
+}
+
+static int rtc_nvram_register(struct rtc_device *rtc)
+{
+ int err;
+
+ rtc->nvram = devm_kzalloc(rtc->dev.parent,
+ sizeof(struct bin_attribute),
+ GFP_KERNEL);
+ if (!rtc->nvram)
+ return -ENOMEM;
+
+ rtc->nvram->attr.name = "nvram";
+ rtc->nvram->attr.mode = 0644;
+ rtc->nvram->private = rtc;
+
+ sysfs_bin_attr_init(rtc->nvram);
+
+ rtc->nvram->read = rtc_nvram_read;
+ rtc->nvram->write = rtc_nvram_write;
+ rtc->nvram->size = rtc->nvmem_config->size;
+
+ err = sysfs_create_bin_file(&rtc->dev.parent->kobj,
+ rtc->nvram);
+ if (err) {
+ devm_kfree(rtc->dev.parent, rtc->nvram);
+ rtc->nvram = NULL;
+ }
+
+ return err;
+}
+
+static void rtc_nvram_unregister(struct rtc_device *rtc)
+{
+ sysfs_remove_bin_file(&rtc->dev.parent->kobj, rtc->nvram);
+}
+
+/*
+ * New ABI, uses nvmem
+ */
+void rtc_nvmem_register(struct rtc_device *rtc)
+{
+ if (!rtc->nvmem_config)
+ return;
+
+ rtc->nvmem_config->dev = &rtc->dev;
+ rtc->nvmem_config->owner = rtc->owner;
+ rtc->nvmem = nvmem_register(rtc->nvmem_config);
+ if (IS_ERR_OR_NULL(rtc->nvmem))
+ return;
+
+ /* Register the old ABI */
+ if (rtc->nvram_old_abi)
+ rtc_nvram_register(rtc);
+}
+
+void rtc_nvmem_unregister(struct rtc_device *rtc)
+{
+ if (IS_ERR_OR_NULL(rtc->nvmem))
+ return;
+
+ /* unregister the old ABI */
+ if (rtc->nvram)
+ rtc_nvram_unregister(rtc);
+
+ nvmem_unregister(rtc->nvmem);
+}
diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c
index b60fd47..e221b78 100644
--- a/drivers/rtc/rtc-at91rm9200.c
+++ b/drivers/rtc/rtc-at91rm9200.c
@@ -409,6 +409,11 @@
return -ENOMEM;
}
+ rtc = devm_rtc_allocate_device(&pdev->dev);
+ if (IS_ERR(rtc))
+ return PTR_ERR(rtc);
+ platform_set_drvdata(pdev, rtc);
+
sclk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(sclk))
return PTR_ERR(sclk);
@@ -441,13 +446,10 @@
if (!device_can_wakeup(&pdev->dev))
device_init_wakeup(&pdev->dev, 1);
- rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
- &at91_rtc_ops, THIS_MODULE);
- if (IS_ERR(rtc)) {
- ret = PTR_ERR(rtc);
+ rtc->ops = &at91_rtc_ops;
+ ret = rtc_register_device(rtc);
+ if (ret)
goto err_clk;
- }
- platform_set_drvdata(pdev, rtc);
/* enable SECEV interrupt in order to initialize at91_rtc_upd_rdy
* completion.
diff --git a/drivers/rtc/rtc-brcmstb-waketimer.c b/drivers/rtc/rtc-brcmstb-waketimer.c
new file mode 100644
index 0000000..796ac79
--- /dev/null
+++ b/drivers/rtc/rtc-brcmstb-waketimer.c
@@ -0,0 +1,330 @@
+/*
+ * Copyright © 2014-2017 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irqreturn.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/pm_wakeup.h>
+#include <linux/reboot.h>
+#include <linux/rtc.h>
+#include <linux/stat.h>
+#include <linux/suspend.h>
+
+struct brcmstb_waketmr {
+ struct rtc_device *rtc;
+ struct device *dev;
+ void __iomem *base;
+ int irq;
+ struct notifier_block reboot_notifier;
+ struct clk *clk;
+ u32 rate;
+};
+
+#define BRCMSTB_WKTMR_EVENT 0x00
+#define BRCMSTB_WKTMR_COUNTER 0x04
+#define BRCMSTB_WKTMR_ALARM 0x08
+#define BRCMSTB_WKTMR_PRESCALER 0x0C
+#define BRCMSTB_WKTMR_PRESCALER_VAL 0x10
+
+#define BRCMSTB_WKTMR_DEFAULT_FREQ 27000000
+
+static inline void brcmstb_waketmr_clear_alarm(struct brcmstb_waketmr *timer)
+{
+ writel_relaxed(1, timer->base + BRCMSTB_WKTMR_EVENT);
+ (void)readl_relaxed(timer->base + BRCMSTB_WKTMR_EVENT);
+}
+
+static void brcmstb_waketmr_set_alarm(struct brcmstb_waketmr *timer,
+ unsigned int secs)
+{
+ brcmstb_waketmr_clear_alarm(timer);
+
+ writel_relaxed(secs + 1, timer->base + BRCMSTB_WKTMR_ALARM);
+}
+
+static irqreturn_t brcmstb_waketmr_irq(int irq, void *data)
+{
+ struct brcmstb_waketmr *timer = data;
+
+ pm_wakeup_event(timer->dev, 0);
+
+ return IRQ_HANDLED;
+}
+
+struct wktmr_time {
+ u32 sec;
+ u32 pre;
+};
+
+static void wktmr_read(struct brcmstb_waketmr *timer,
+ struct wktmr_time *t)
+{
+ u32 tmp;
+
+ do {
+ t->sec = readl_relaxed(timer->base + BRCMSTB_WKTMR_COUNTER);
+ tmp = readl_relaxed(timer->base + BRCMSTB_WKTMR_PRESCALER_VAL);
+ } while (tmp >= timer->rate);
+
+ t->pre = timer->rate - tmp;
+}
+
+static int brcmstb_waketmr_prepare_suspend(struct brcmstb_waketmr *timer)
+{
+ struct device *dev = timer->dev;
+ int ret = 0;
+
+ if (device_may_wakeup(dev)) {
+ ret = enable_irq_wake(timer->irq);
+ if (ret) {
+ dev_err(dev, "failed to enable wake-up interrupt\n");
+ return ret;
+ }
+ }
+
+ return ret;
+}
+
+/* If enabled as a wakeup-source, arm the timer when powering off */
+static int brcmstb_waketmr_reboot(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct brcmstb_waketmr *timer;
+
+ timer = container_of(nb, struct brcmstb_waketmr, reboot_notifier);
+
+ /* Set timer for cold boot */
+ if (action == SYS_POWER_OFF)
+ brcmstb_waketmr_prepare_suspend(timer);
+
+ return NOTIFY_DONE;
+}
+
+static int brcmstb_waketmr_gettime(struct device *dev,
+ struct rtc_time *tm)
+{
+ struct brcmstb_waketmr *timer = dev_get_drvdata(dev);
+ struct wktmr_time now;
+
+ wktmr_read(timer, &now);
+
+ rtc_time_to_tm(now.sec, tm);
+
+ return 0;
+}
+
+static int brcmstb_waketmr_settime(struct device *dev,
+ struct rtc_time *tm)
+{
+ struct brcmstb_waketmr *timer = dev_get_drvdata(dev);
+ time64_t sec;
+
+ sec = rtc_tm_to_time64(tm);
+
+ if (sec > U32_MAX || sec < 0)
+ return -EINVAL;
+
+ writel_relaxed(sec, timer->base + BRCMSTB_WKTMR_COUNTER);
+
+ return 0;
+}
+
+static int brcmstb_waketmr_getalarm(struct device *dev,
+ struct rtc_wkalrm *alarm)
+{
+ struct brcmstb_waketmr *timer = dev_get_drvdata(dev);
+ time64_t sec;
+ u32 reg;
+
+ sec = readl_relaxed(timer->base + BRCMSTB_WKTMR_ALARM);
+ if (sec != 0) {
+ /* Alarm is enabled */
+ alarm->enabled = 1;
+ rtc_time64_to_tm(sec, &alarm->time);
+ }
+
+ reg = readl_relaxed(timer->base + BRCMSTB_WKTMR_EVENT);
+ alarm->pending = !!(reg & 1);
+
+ return 0;
+}
+
+static int brcmstb_waketmr_setalarm(struct device *dev,
+ struct rtc_wkalrm *alarm)
+{
+ struct brcmstb_waketmr *timer = dev_get_drvdata(dev);
+ time64_t sec;
+
+ if (alarm->enabled)
+ sec = rtc_tm_to_time64(&alarm->time);
+ else
+ sec = 0;
+
+ if (sec > U32_MAX || sec < 0)
+ return -EINVAL;
+
+ brcmstb_waketmr_set_alarm(timer, sec);
+
+ return 0;
+}
+
+/*
+ * Does not do much but keep the RTC class happy. We always support
+ * alarms.
+ */
+static int brcmstb_waketmr_alarm_enable(struct device *dev,
+ unsigned int enabled)
+{
+ return 0;
+}
+
+static const struct rtc_class_ops brcmstb_waketmr_ops = {
+ .read_time = brcmstb_waketmr_gettime,
+ .set_time = brcmstb_waketmr_settime,
+ .read_alarm = brcmstb_waketmr_getalarm,
+ .set_alarm = brcmstb_waketmr_setalarm,
+ .alarm_irq_enable = brcmstb_waketmr_alarm_enable,
+};
+
+static int brcmstb_waketmr_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct brcmstb_waketmr *timer;
+ struct resource *res;
+ int ret;
+
+ timer = devm_kzalloc(dev, sizeof(*timer), GFP_KERNEL);
+ if (!timer)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, timer);
+ timer->dev = dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ timer->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(timer->base))
+ return PTR_ERR(timer->base);
+
+ /*
+ * Set wakeup capability before requesting wakeup interrupt, so we can
+ * process boot-time "wakeups" (e.g., from S5 soft-off)
+ */
+ device_set_wakeup_capable(dev, true);
+ device_wakeup_enable(dev);
+
+ timer->irq = platform_get_irq(pdev, 0);
+ if (timer->irq < 0)
+ return -ENODEV;
+
+ timer->clk = devm_clk_get(dev, NULL);
+ if (!IS_ERR(timer->clk)) {
+ ret = clk_prepare_enable(timer->clk);
+ if (ret)
+ return ret;
+ timer->rate = clk_get_rate(timer->clk);
+ if (!timer->rate)
+ timer->rate = BRCMSTB_WKTMR_DEFAULT_FREQ;
+ } else {
+ timer->rate = BRCMSTB_WKTMR_DEFAULT_FREQ;
+ timer->clk = NULL;
+ }
+
+ ret = devm_request_irq(dev, timer->irq, brcmstb_waketmr_irq, 0,
+ "brcmstb-waketimer", timer);
+ if (ret < 0)
+ return ret;
+
+ timer->reboot_notifier.notifier_call = brcmstb_waketmr_reboot;
+ register_reboot_notifier(&timer->reboot_notifier);
+
+ timer->rtc = rtc_device_register("brcmstb-waketmr", dev,
+ &brcmstb_waketmr_ops, THIS_MODULE);
+ if (IS_ERR(timer->rtc)) {
+ dev_err(dev, "unable to register device\n");
+ unregister_reboot_notifier(&timer->reboot_notifier);
+ return PTR_ERR(timer->rtc);
+ }
+
+ dev_info(dev, "registered, with irq %d\n", timer->irq);
+
+ return ret;
+}
+
+static int brcmstb_waketmr_remove(struct platform_device *pdev)
+{
+ struct brcmstb_waketmr *timer = dev_get_drvdata(&pdev->dev);
+
+ unregister_reboot_notifier(&timer->reboot_notifier);
+ rtc_device_unregister(timer->rtc);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int brcmstb_waketmr_suspend(struct device *dev)
+{
+ struct brcmstb_waketmr *timer = dev_get_drvdata(dev);
+
+ return brcmstb_waketmr_prepare_suspend(timer);
+}
+
+static int brcmstb_waketmr_resume(struct device *dev)
+{
+ struct brcmstb_waketmr *timer = dev_get_drvdata(dev);
+ int ret;
+
+ if (!device_may_wakeup(dev))
+ return 0;
+
+ ret = disable_irq_wake(timer->irq);
+
+ brcmstb_waketmr_clear_alarm(timer);
+
+ return ret;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(brcmstb_waketmr_pm_ops,
+ brcmstb_waketmr_suspend, brcmstb_waketmr_resume);
+
+static const struct of_device_id brcmstb_waketmr_of_match[] = {
+ { .compatible = "brcm,brcmstb-waketimer" },
+ { /* sentinel */ },
+};
+
+static struct platform_driver brcmstb_waketmr_driver = {
+ .probe = brcmstb_waketmr_probe,
+ .remove = brcmstb_waketmr_remove,
+ .driver = {
+ .name = "brcmstb-waketimer",
+ .pm = &brcmstb_waketmr_pm_ops,
+ .of_match_table = of_match_ptr(brcmstb_waketmr_of_match),
+ }
+};
+module_platform_driver(brcmstb_waketmr_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Brian Norris");
+MODULE_AUTHOR("Markus Mayer");
+MODULE_DESCRIPTION("Wake-up timer driver for STB chips");
diff --git a/drivers/rtc/rtc-core.h b/drivers/rtc/rtc-core.h
index 7a4ed2f..ecab76a 100644
--- a/drivers/rtc/rtc-core.h
+++ b/drivers/rtc/rtc-core.h
@@ -45,3 +45,11 @@
return NULL;
}
#endif
+
+#ifdef CONFIG_RTC_NVMEM
+void rtc_nvmem_register(struct rtc_device *rtc);
+void rtc_nvmem_unregister(struct rtc_device *rtc);
+#else
+static inline void rtc_nvmem_register(struct rtc_device *rtc) {}
+static inline void rtc_nvmem_unregister(struct rtc_device *rtc) {}
+#endif
diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c
index e81a871..794bc4f 100644
--- a/drivers/rtc/rtc-dev.c
+++ b/drivers/rtc/rtc-dev.c
@@ -464,7 +464,7 @@
return;
if (rtc->id >= RTC_DEV_MAX) {
- dev_dbg(&rtc->dev, "%s: too many RTC devices\n", rtc->name);
+ dev_dbg(&rtc->dev, "too many RTC devices\n");
return;
}
diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index 77339b3..4fac49e 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -24,6 +24,7 @@
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/clk-provider.h>
+#include <linux/regmap.h>
/*
* We can't determine type by probing, but if we expect pre-Linux code
@@ -33,6 +34,7 @@
*/
enum ds_type {
ds_1307,
+ ds_1308,
ds_1337,
ds_1338,
ds_1339,
@@ -43,6 +45,7 @@
m41t00,
mcp794xx,
rx_8025,
+ rx_8130,
last_ds_type /* always last */
/* rs5c372 too? different address... */
};
@@ -115,17 +118,16 @@
u8 offset; /* register's offset */
u8 regs[11];
u16 nvram_offset;
- struct bin_attribute *nvram;
+ struct nvmem_config nvmem_cfg;
enum ds_type type;
unsigned long flags;
#define HAS_NVRAM 0 /* bit 0 == sysfs file active */
#define HAS_ALARM 1 /* bit 1 == irq claimed */
- struct i2c_client *client;
+ struct device *dev;
+ struct regmap *regmap;
+ const char *name;
+ int irq;
struct rtc_device *rtc;
- s32 (*read_block_data)(const struct i2c_client *client, u8 command,
- u8 length, u8 *values);
- s32 (*write_block_data)(const struct i2c_client *client, u8 command,
- u8 length, const u8 *values);
#ifdef CONFIG_COMMON_CLK
struct clk_hw clks[2];
#endif
@@ -135,21 +137,30 @@
unsigned alarm:1;
u16 nvram_offset;
u16 nvram_size;
+ u8 century_reg;
+ u8 century_enable_bit;
+ u8 century_bit;
u16 trickle_charger_reg;
u8 trickle_charger_setup;
- u8 (*do_trickle_setup)(struct i2c_client *, uint32_t, bool);
+ u8 (*do_trickle_setup)(struct ds1307 *, uint32_t,
+ bool);
};
-static u8 do_trickle_setup_ds1339(struct i2c_client *,
- uint32_t ohms, bool diode);
+static u8 do_trickle_setup_ds1339(struct ds1307 *, uint32_t ohms, bool diode);
static struct chip_desc chips[last_ds_type] = {
[ds_1307] = {
.nvram_offset = 8,
.nvram_size = 56,
},
+ [ds_1308] = {
+ .nvram_offset = 8,
+ .nvram_size = 56,
+ },
[ds_1337] = {
.alarm = 1,
+ .century_reg = DS1307_REG_MONTH,
+ .century_bit = DS1337_BIT_CENTURY,
},
[ds_1338] = {
.nvram_offset = 8,
@@ -157,10 +168,15 @@
},
[ds_1339] = {
.alarm = 1,
+ .century_reg = DS1307_REG_MONTH,
+ .century_bit = DS1337_BIT_CENTURY,
.trickle_charger_reg = 0x10,
.do_trickle_setup = &do_trickle_setup_ds1339,
},
[ds_1340] = {
+ .century_reg = DS1307_REG_HOUR,
+ .century_enable_bit = DS1340_BIT_CENTURY_EN,
+ .century_bit = DS1340_BIT_CENTURY,
.trickle_charger_reg = 0x08,
},
[ds_1388] = {
@@ -168,6 +184,14 @@
},
[ds_3231] = {
.alarm = 1,
+ .century_reg = DS1307_REG_MONTH,
+ .century_bit = DS1337_BIT_CENTURY,
+ },
+ [rx_8130] = {
+ .alarm = 1,
+ /* this is battery backed SRAM */
+ .nvram_offset = 0x20,
+ .nvram_size = 4, /* 32bit (4 word x 8 bit) */
},
[mcp794xx] = {
.alarm = 1,
@@ -179,6 +203,7 @@
static const struct i2c_device_id ds1307_id[] = {
{ "ds1307", ds_1307 },
+ { "ds1308", ds_1308 },
{ "ds1337", ds_1337 },
{ "ds1338", ds_1338 },
{ "ds1339", ds_1339 },
@@ -192,6 +217,7 @@
{ "pt7c4338", ds_1307 },
{ "rx8025", rx_8025 },
{ "isl12057", ds_1337 },
+ { "rx8130", rx_8130 },
{ }
};
MODULE_DEVICE_TABLE(i2c, ds1307_id);
@@ -203,6 +229,10 @@
.data = (void *)ds_1307
},
{
+ .compatible = "dallas,ds1308",
+ .data = (void *)ds_1308
+ },
+ {
.compatible = "dallas,ds1337",
.data = (void *)ds_1337
},
@@ -262,6 +292,7 @@
#ifdef CONFIG_ACPI
static const struct acpi_device_id ds1307_acpi_ids[] = {
{ .id = "DS1307", .driver_data = ds_1307 },
+ { .id = "DS1308", .driver_data = ds_1308 },
{ .id = "DS1337", .driver_data = ds_1337 },
{ .id = "DS1338", .driver_data = ds_1338 },
{ .id = "DS1339", .driver_data = ds_1339 },
@@ -280,136 +311,6 @@
MODULE_DEVICE_TABLE(acpi, ds1307_acpi_ids);
#endif
-/*----------------------------------------------------------------------*/
-
-#define BLOCK_DATA_MAX_TRIES 10
-
-static s32 ds1307_read_block_data_once(const struct i2c_client *client,
- u8 command, u8 length, u8 *values)
-{
- s32 i, data;
-
- for (i = 0; i < length; i++) {
- data = i2c_smbus_read_byte_data(client, command + i);
- if (data < 0)
- return data;
- values[i] = data;
- }
- return i;
-}
-
-static s32 ds1307_read_block_data(const struct i2c_client *client, u8 command,
- u8 length, u8 *values)
-{
- u8 oldvalues[255];
- s32 ret;
- int tries = 0;
-
- dev_dbg(&client->dev, "ds1307_read_block_data (length=%d)\n", length);
- ret = ds1307_read_block_data_once(client, command, length, values);
- if (ret < 0)
- return ret;
- do {
- if (++tries > BLOCK_DATA_MAX_TRIES) {
- dev_err(&client->dev,
- "ds1307_read_block_data failed\n");
- return -EIO;
- }
- memcpy(oldvalues, values, length);
- ret = ds1307_read_block_data_once(client, command, length,
- values);
- if (ret < 0)
- return ret;
- } while (memcmp(oldvalues, values, length));
- return length;
-}
-
-static s32 ds1307_write_block_data(const struct i2c_client *client, u8 command,
- u8 length, const u8 *values)
-{
- u8 currvalues[255];
- int tries = 0;
-
- dev_dbg(&client->dev, "ds1307_write_block_data (length=%d)\n", length);
- do {
- s32 i, ret;
-
- if (++tries > BLOCK_DATA_MAX_TRIES) {
- dev_err(&client->dev,
- "ds1307_write_block_data failed\n");
- return -EIO;
- }
- for (i = 0; i < length; i++) {
- ret = i2c_smbus_write_byte_data(client, command + i,
- values[i]);
- if (ret < 0)
- return ret;
- }
- ret = ds1307_read_block_data_once(client, command, length,
- currvalues);
- if (ret < 0)
- return ret;
- } while (memcmp(currvalues, values, length));
- return length;
-}
-
-/*----------------------------------------------------------------------*/
-
-/* These RTC devices are not designed to be connected to a SMbus adapter.
- SMbus limits block operations length to 32 bytes, whereas it's not
- limited on I2C buses. As a result, accesses may exceed 32 bytes;
- in that case, split them into smaller blocks */
-
-static s32 ds1307_native_smbus_write_block_data(const struct i2c_client *client,
- u8 command, u8 length, const u8 *values)
-{
- u8 suboffset = 0;
-
- if (length <= I2C_SMBUS_BLOCK_MAX) {
- s32 retval = i2c_smbus_write_i2c_block_data(client,
- command, length, values);
- if (retval < 0)
- return retval;
- return length;
- }
-
- while (suboffset < length) {
- s32 retval = i2c_smbus_write_i2c_block_data(client,
- command + suboffset,
- min(I2C_SMBUS_BLOCK_MAX, length - suboffset),
- values + suboffset);
- if (retval < 0)
- return retval;
-
- suboffset += I2C_SMBUS_BLOCK_MAX;
- }
- return length;
-}
-
-static s32 ds1307_native_smbus_read_block_data(const struct i2c_client *client,
- u8 command, u8 length, u8 *values)
-{
- u8 suboffset = 0;
-
- if (length <= I2C_SMBUS_BLOCK_MAX)
- return i2c_smbus_read_i2c_block_data(client,
- command, length, values);
-
- while (suboffset < length) {
- s32 retval = i2c_smbus_read_i2c_block_data(client,
- command + suboffset,
- min(I2C_SMBUS_BLOCK_MAX, length - suboffset),
- values + suboffset);
- if (retval < 0)
- return retval;
-
- suboffset += I2C_SMBUS_BLOCK_MAX;
- }
- return length;
-}
-
-/*----------------------------------------------------------------------*/
-
/*
* The ds1337 and ds1339 both have two alarms, but we only use the first
* one (with a "seconds" field). For ds1337 we expect nINTA is our alarm
@@ -417,27 +318,24 @@
*/
static irqreturn_t ds1307_irq(int irq, void *dev_id)
{
- struct i2c_client *client = dev_id;
- struct ds1307 *ds1307 = i2c_get_clientdata(client);
+ struct ds1307 *ds1307 = dev_id;
struct mutex *lock = &ds1307->rtc->ops_lock;
- int stat, control;
+ int stat, ret;
mutex_lock(lock);
- stat = i2c_smbus_read_byte_data(client, DS1337_REG_STATUS);
- if (stat < 0)
+ ret = regmap_read(ds1307->regmap, DS1337_REG_STATUS, &stat);
+ if (ret)
goto out;
if (stat & DS1337_BIT_A1I) {
stat &= ~DS1337_BIT_A1I;
- i2c_smbus_write_byte_data(client, DS1337_REG_STATUS, stat);
+ regmap_write(ds1307->regmap, DS1337_REG_STATUS, stat);
- control = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL);
- if (control < 0)
+ ret = regmap_update_bits(ds1307->regmap, DS1337_REG_CONTROL,
+ DS1337_BIT_A1IE, 0);
+ if (ret)
goto out;
- control &= ~DS1337_BIT_A1IE;
- i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, control);
-
rtc_update_irq(ds1307->rtc, 1, RTC_AF | RTC_IRQF);
}
@@ -452,14 +350,14 @@
static int ds1307_get_time(struct device *dev, struct rtc_time *t)
{
struct ds1307 *ds1307 = dev_get_drvdata(dev);
- int tmp;
+ int tmp, ret;
+ const struct chip_desc *chip = &chips[ds1307->type];
/* read the RTC date and time registers all at once */
- tmp = ds1307->read_block_data(ds1307->client,
- ds1307->offset, 7, ds1307->regs);
- if (tmp != 7) {
- dev_err(dev, "%s error %d\n", "read", tmp);
- return -EIO;
+ ret = regmap_bulk_read(ds1307->regmap, ds1307->offset, ds1307->regs, 7);
+ if (ret) {
+ dev_err(dev, "%s error %d\n", "read", ret);
+ return ret;
}
dev_dbg(dev, "%s: %7ph\n", "read", ds1307->regs);
@@ -481,22 +379,9 @@
t->tm_mon = bcd2bin(tmp) - 1;
t->tm_year = bcd2bin(ds1307->regs[DS1307_REG_YEAR]) + 100;
-#ifdef CONFIG_RTC_DRV_DS1307_CENTURY
- switch (ds1307->type) {
- case ds_1337:
- case ds_1339:
- case ds_3231:
- if (ds1307->regs[DS1307_REG_MONTH] & DS1337_BIT_CENTURY)
- t->tm_year += 100;
- break;
- case ds_1340:
- if (ds1307->regs[DS1307_REG_HOUR] & DS1340_BIT_CENTURY)
- t->tm_year += 100;
- break;
- default:
- break;
- }
-#endif
+ if (ds1307->regs[chip->century_reg] & chip->century_bit &&
+ IS_ENABLED(CONFIG_RTC_DRV_DS1307_CENTURY))
+ t->tm_year += 100;
dev_dbg(dev, "%s secs=%d, mins=%d, "
"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
@@ -511,6 +396,7 @@
static int ds1307_set_time(struct device *dev, struct rtc_time *t)
{
struct ds1307 *ds1307 = dev_get_drvdata(dev);
+ const struct chip_desc *chip = &chips[ds1307->type];
int result;
int tmp;
u8 *buf = ds1307->regs;
@@ -521,24 +407,14 @@
t->tm_hour, t->tm_mday,
t->tm_mon, t->tm_year, t->tm_wday);
-#ifdef CONFIG_RTC_DRV_DS1307_CENTURY
if (t->tm_year < 100)
return -EINVAL;
- switch (ds1307->type) {
- case ds_1337:
- case ds_1339:
- case ds_3231:
- case ds_1340:
- if (t->tm_year > 299)
- return -EINVAL;
- default:
- if (t->tm_year > 199)
- return -EINVAL;
- break;
- }
+#ifdef CONFIG_RTC_DRV_DS1307_CENTURY
+ if (t->tm_year > (chip->century_bit ? 299 : 199))
+ return -EINVAL;
#else
- if (t->tm_year < 100 || t->tm_year > 199)
+ if (t->tm_year > 199)
return -EINVAL;
#endif
@@ -553,19 +429,12 @@
tmp = t->tm_year - 100;
buf[DS1307_REG_YEAR] = bin2bcd(tmp);
- switch (ds1307->type) {
- case ds_1337:
- case ds_1339:
- case ds_3231:
- if (t->tm_year > 199)
- buf[DS1307_REG_MONTH] |= DS1337_BIT_CENTURY;
- break;
- case ds_1340:
- buf[DS1307_REG_HOUR] |= DS1340_BIT_CENTURY_EN;
- if (t->tm_year > 199)
- buf[DS1307_REG_HOUR] |= DS1340_BIT_CENTURY;
- break;
- case mcp794xx:
+ if (chip->century_enable_bit)
+ buf[chip->century_reg] |= chip->century_enable_bit;
+ if (t->tm_year > 199 && chip->century_bit)
+ buf[chip->century_reg] |= chip->century_bit;
+
+ if (ds1307->type == mcp794xx) {
/*
* these bits were cleared when preparing the date/time
* values and need to be set again before writing the
@@ -573,16 +442,12 @@
*/
buf[DS1307_REG_SECS] |= MCP794XX_BIT_ST;
buf[DS1307_REG_WDAY] |= MCP794XX_BIT_VBATEN;
- break;
- default:
- break;
}
dev_dbg(dev, "%s: %7ph\n", "write", buf);
- result = ds1307->write_block_data(ds1307->client,
- ds1307->offset, 7, buf);
- if (result < 0) {
+ result = regmap_bulk_write(ds1307->regmap, ds1307->offset, buf, 7);
+ if (result) {
dev_err(dev, "%s error %d\n", "write", result);
return result;
}
@@ -591,19 +456,18 @@
static int ds1337_read_alarm(struct device *dev, struct rtc_wkalrm *t)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct ds1307 *ds1307 = i2c_get_clientdata(client);
+ struct ds1307 *ds1307 = dev_get_drvdata(dev);
int ret;
if (!test_bit(HAS_ALARM, &ds1307->flags))
return -EINVAL;
/* read all ALARM1, ALARM2, and status registers at once */
- ret = ds1307->read_block_data(client,
- DS1339_REG_ALARM1_SECS, 9, ds1307->regs);
- if (ret != 9) {
+ ret = regmap_bulk_read(ds1307->regmap, DS1339_REG_ALARM1_SECS,
+ ds1307->regs, 9);
+ if (ret) {
dev_err(dev, "%s error %d\n", "alarm read", ret);
- return -EIO;
+ return ret;
}
dev_dbg(dev, "%s: %4ph, %3ph, %2ph\n", "alarm read",
@@ -633,8 +497,7 @@
static int ds1337_set_alarm(struct device *dev, struct rtc_wkalrm *t)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct ds1307 *ds1307 = i2c_get_clientdata(client);
+ struct ds1307 *ds1307 = dev_get_drvdata(dev);
unsigned char *buf = ds1307->regs;
u8 control, status;
int ret;
@@ -649,11 +512,10 @@
t->enabled, t->pending);
/* read current status of both alarms and the chip */
- ret = ds1307->read_block_data(client,
- DS1339_REG_ALARM1_SECS, 9, buf);
- if (ret != 9) {
+ ret = regmap_bulk_read(ds1307->regmap, DS1339_REG_ALARM1_SECS, buf, 9);
+ if (ret) {
dev_err(dev, "%s error %d\n", "alarm write", ret);
- return -EIO;
+ return ret;
}
control = ds1307->regs[7];
status = ds1307->regs[8];
@@ -676,9 +538,8 @@
buf[7] = control & ~(DS1337_BIT_A1IE | DS1337_BIT_A2IE);
buf[8] = status & ~(DS1337_BIT_A1I | DS1337_BIT_A2I);
- ret = ds1307->write_block_data(client,
- DS1339_REG_ALARM1_SECS, 9, buf);
- if (ret < 0) {
+ ret = regmap_bulk_write(ds1307->regmap, DS1339_REG_ALARM1_SECS, buf, 9);
+ if (ret) {
dev_err(dev, "can't set alarm time\n");
return ret;
}
@@ -687,7 +548,7 @@
if (t->enabled) {
dev_dbg(dev, "alarm IRQ armed\n");
buf[7] |= DS1337_BIT_A1IE; /* only ALARM1 is used */
- i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, buf[7]);
+ regmap_write(ds1307->regmap, DS1337_REG_CONTROL, buf[7]);
}
return 0;
@@ -695,27 +556,14 @@
static int ds1307_alarm_irq_enable(struct device *dev, unsigned int enabled)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct ds1307 *ds1307 = i2c_get_clientdata(client);
- int ret;
+ struct ds1307 *ds1307 = dev_get_drvdata(dev);
if (!test_bit(HAS_ALARM, &ds1307->flags))
return -ENOTTY;
- ret = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL);
- if (ret < 0)
- return ret;
-
- if (enabled)
- ret |= DS1337_BIT_A1IE;
- else
- ret &= ~DS1337_BIT_A1IE;
-
- ret = i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, ret);
- if (ret < 0)
- return ret;
-
- return 0;
+ return regmap_update_bits(ds1307->regmap, DS1337_REG_CONTROL,
+ DS1337_BIT_A1IE,
+ enabled ? DS1337_BIT_A1IE : 0);
}
static const struct rtc_class_ops ds13xx_rtc_ops = {
@@ -729,6 +577,165 @@
/*----------------------------------------------------------------------*/
/*
+ * Alarm support for rx8130 devices.
+ */
+
+#define RX8130_REG_ALARM_MIN 0x07
+#define RX8130_REG_ALARM_HOUR 0x08
+#define RX8130_REG_ALARM_WEEK_OR_DAY 0x09
+#define RX8130_REG_EXTENSION 0x0c
+#define RX8130_REG_EXTENSION_WADA (1 << 3)
+#define RX8130_REG_FLAG 0x0d
+#define RX8130_REG_FLAG_AF (1 << 3)
+#define RX8130_REG_CONTROL0 0x0e
+#define RX8130_REG_CONTROL0_AIE (1 << 3)
+
+static irqreturn_t rx8130_irq(int irq, void *dev_id)
+{
+ struct ds1307 *ds1307 = dev_id;
+ struct mutex *lock = &ds1307->rtc->ops_lock;
+ u8 ctl[3];
+ int ret;
+
+ mutex_lock(lock);
+
+ /* Read control registers. */
+ ret = regmap_bulk_read(ds1307->regmap, RX8130_REG_EXTENSION, ctl, 3);
+ if (ret < 0)
+ goto out;
+ if (!(ctl[1] & RX8130_REG_FLAG_AF))
+ goto out;
+ ctl[1] &= ~RX8130_REG_FLAG_AF;
+ ctl[2] &= ~RX8130_REG_CONTROL0_AIE;
+
+ ret = regmap_bulk_write(ds1307->regmap, RX8130_REG_EXTENSION, ctl, 3);
+ if (ret < 0)
+ goto out;
+
+ rtc_update_irq(ds1307->rtc, 1, RTC_AF | RTC_IRQF);
+
+out:
+ mutex_unlock(lock);
+
+ return IRQ_HANDLED;
+}
+
+static int rx8130_read_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+ struct ds1307 *ds1307 = dev_get_drvdata(dev);
+ u8 ald[3], ctl[3];
+ int ret;
+
+ if (!test_bit(HAS_ALARM, &ds1307->flags))
+ return -EINVAL;
+
+ /* Read alarm registers. */
+ ret = regmap_bulk_read(ds1307->regmap, RX8130_REG_ALARM_MIN, ald, 3);
+ if (ret < 0)
+ return ret;
+
+ /* Read control registers. */
+ ret = regmap_bulk_read(ds1307->regmap, RX8130_REG_EXTENSION, ctl, 3);
+ if (ret < 0)
+ return ret;
+
+ t->enabled = !!(ctl[2] & RX8130_REG_CONTROL0_AIE);
+ t->pending = !!(ctl[1] & RX8130_REG_FLAG_AF);
+
+ /* Report alarm 0 time assuming 24-hour and day-of-month modes. */
+ t->time.tm_sec = -1;
+ t->time.tm_min = bcd2bin(ald[0] & 0x7f);
+ t->time.tm_hour = bcd2bin(ald[1] & 0x7f);
+ t->time.tm_wday = -1;
+ t->time.tm_mday = bcd2bin(ald[2] & 0x7f);
+ t->time.tm_mon = -1;
+ t->time.tm_year = -1;
+ t->time.tm_yday = -1;
+ t->time.tm_isdst = -1;
+
+ dev_dbg(dev, "%s, sec=%d min=%d hour=%d wday=%d mday=%d mon=%d enabled=%d\n",
+ __func__, t->time.tm_sec, t->time.tm_min, t->time.tm_hour,
+ t->time.tm_wday, t->time.tm_mday, t->time.tm_mon, t->enabled);
+
+ return 0;
+}
+
+static int rx8130_set_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+ struct ds1307 *ds1307 = dev_get_drvdata(dev);
+ u8 ald[3], ctl[3];
+ int ret;
+
+ if (!test_bit(HAS_ALARM, &ds1307->flags))
+ return -EINVAL;
+
+ dev_dbg(dev, "%s, sec=%d min=%d hour=%d wday=%d mday=%d mon=%d "
+ "enabled=%d pending=%d\n", __func__,
+ t->time.tm_sec, t->time.tm_min, t->time.tm_hour,
+ t->time.tm_wday, t->time.tm_mday, t->time.tm_mon,
+ t->enabled, t->pending);
+
+ /* Read control registers. */
+ ret = regmap_bulk_read(ds1307->regmap, RX8130_REG_EXTENSION, ctl, 3);
+ if (ret < 0)
+ return ret;
+
+ ctl[0] &= ~RX8130_REG_EXTENSION_WADA;
+ ctl[1] |= RX8130_REG_FLAG_AF;
+ ctl[2] &= ~RX8130_REG_CONTROL0_AIE;
+
+ ret = regmap_bulk_write(ds1307->regmap, RX8130_REG_EXTENSION, ctl, 3);
+ if (ret < 0)
+ return ret;
+
+ /* Hardware alarm precision is 1 minute! */
+ ald[0] = bin2bcd(t->time.tm_min);
+ ald[1] = bin2bcd(t->time.tm_hour);
+ ald[2] = bin2bcd(t->time.tm_mday);
+
+ ret = regmap_bulk_write(ds1307->regmap, RX8130_REG_ALARM_MIN, ald, 3);
+ if (ret < 0)
+ return ret;
+
+ if (!t->enabled)
+ return 0;
+
+ ctl[2] |= RX8130_REG_CONTROL0_AIE;
+
+ return regmap_bulk_write(ds1307->regmap, RX8130_REG_EXTENSION, ctl, 3);
+}
+
+static int rx8130_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+ struct ds1307 *ds1307 = dev_get_drvdata(dev);
+ int ret, reg;
+
+ if (!test_bit(HAS_ALARM, &ds1307->flags))
+ return -EINVAL;
+
+ ret = regmap_read(ds1307->regmap, RX8130_REG_CONTROL0, ®);
+ if (ret < 0)
+ return ret;
+
+ if (enabled)
+ reg |= RX8130_REG_CONTROL0_AIE;
+ else
+ reg &= ~RX8130_REG_CONTROL0_AIE;
+
+ return regmap_write(ds1307->regmap, RX8130_REG_CONTROL0, reg);
+}
+
+static const struct rtc_class_ops rx8130_rtc_ops = {
+ .read_time = ds1307_get_time,
+ .set_time = ds1307_set_time,
+ .read_alarm = rx8130_read_alarm,
+ .set_alarm = rx8130_set_alarm,
+ .alarm_irq_enable = rx8130_alarm_irq_enable,
+};
+
+/*----------------------------------------------------------------------*/
+
+/*
* Alarm support for mcp794xx devices.
*/
@@ -752,31 +759,27 @@
static irqreturn_t mcp794xx_irq(int irq, void *dev_id)
{
- struct i2c_client *client = dev_id;
- struct ds1307 *ds1307 = i2c_get_clientdata(client);
+ struct ds1307 *ds1307 = dev_id;
struct mutex *lock = &ds1307->rtc->ops_lock;
int reg, ret;
mutex_lock(lock);
/* Check and clear alarm 0 interrupt flag. */
- reg = i2c_smbus_read_byte_data(client, MCP794XX_REG_ALARM0_CTRL);
- if (reg < 0)
+ ret = regmap_read(ds1307->regmap, MCP794XX_REG_ALARM0_CTRL, ®);
+ if (ret)
goto out;
if (!(reg & MCP794XX_BIT_ALMX_IF))
goto out;
reg &= ~MCP794XX_BIT_ALMX_IF;
- ret = i2c_smbus_write_byte_data(client, MCP794XX_REG_ALARM0_CTRL, reg);
- if (ret < 0)
+ ret = regmap_write(ds1307->regmap, MCP794XX_REG_ALARM0_CTRL, reg);
+ if (ret)
goto out;
/* Disable alarm 0. */
- reg = i2c_smbus_read_byte_data(client, MCP794XX_REG_CONTROL);
- if (reg < 0)
- goto out;
- reg &= ~MCP794XX_BIT_ALM0_EN;
- ret = i2c_smbus_write_byte_data(client, MCP794XX_REG_CONTROL, reg);
- if (ret < 0)
+ ret = regmap_update_bits(ds1307->regmap, MCP794XX_REG_CONTROL,
+ MCP794XX_BIT_ALM0_EN, 0);
+ if (ret)
goto out;
rtc_update_irq(ds1307->rtc, 1, RTC_AF | RTC_IRQF);
@@ -789,8 +792,7 @@
static int mcp794xx_read_alarm(struct device *dev, struct rtc_wkalrm *t)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct ds1307 *ds1307 = i2c_get_clientdata(client);
+ struct ds1307 *ds1307 = dev_get_drvdata(dev);
u8 *regs = ds1307->regs;
int ret;
@@ -798,8 +800,8 @@
return -EINVAL;
/* Read control and alarm 0 registers. */
- ret = ds1307->read_block_data(client, MCP794XX_REG_CONTROL, 10, regs);
- if (ret < 0)
+ ret = regmap_bulk_read(ds1307->regmap, MCP794XX_REG_CONTROL, regs, 10);
+ if (ret)
return ret;
t->enabled = !!(regs[0] & MCP794XX_BIT_ALM0_EN);
@@ -828,8 +830,7 @@
static int mcp794xx_set_alarm(struct device *dev, struct rtc_wkalrm *t)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct ds1307 *ds1307 = i2c_get_clientdata(client);
+ struct ds1307 *ds1307 = dev_get_drvdata(dev);
unsigned char *regs = ds1307->regs;
int ret;
@@ -843,8 +844,8 @@
t->enabled, t->pending);
/* Read control and alarm 0 registers. */
- ret = ds1307->read_block_data(client, MCP794XX_REG_CONTROL, 10, regs);
- if (ret < 0)
+ ret = regmap_bulk_read(ds1307->regmap, MCP794XX_REG_CONTROL, regs, 10);
+ if (ret)
return ret;
/* Set alarm 0, using 24-hour and day-of-month modes. */
@@ -862,35 +863,26 @@
/* Disable interrupt. We will not enable until completely programmed */
regs[0] &= ~MCP794XX_BIT_ALM0_EN;
- ret = ds1307->write_block_data(client, MCP794XX_REG_CONTROL, 10, regs);
- if (ret < 0)
+ ret = regmap_bulk_write(ds1307->regmap, MCP794XX_REG_CONTROL, regs, 10);
+ if (ret)
return ret;
if (!t->enabled)
return 0;
regs[0] |= MCP794XX_BIT_ALM0_EN;
- return i2c_smbus_write_byte_data(client, MCP794XX_REG_CONTROL, regs[0]);
+ return regmap_write(ds1307->regmap, MCP794XX_REG_CONTROL, regs[0]);
}
static int mcp794xx_alarm_irq_enable(struct device *dev, unsigned int enabled)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct ds1307 *ds1307 = i2c_get_clientdata(client);
- int reg;
+ struct ds1307 *ds1307 = dev_get_drvdata(dev);
if (!test_bit(HAS_ALARM, &ds1307->flags))
return -EINVAL;
- reg = i2c_smbus_read_byte_data(client, MCP794XX_REG_CONTROL);
- if (reg < 0)
- return reg;
-
- if (enabled)
- reg |= MCP794XX_BIT_ALM0_EN;
- else
- reg &= ~MCP794XX_BIT_ALM0_EN;
-
- return i2c_smbus_write_byte_data(client, MCP794XX_REG_CONTROL, reg);
+ return regmap_update_bits(ds1307->regmap, MCP794XX_REG_CONTROL,
+ MCP794XX_BIT_ALM0_EN,
+ enabled ? MCP794XX_BIT_ALM0_EN : 0);
}
static const struct rtc_class_ops mcp794xx_rtc_ops = {
@@ -903,50 +895,27 @@
/*----------------------------------------------------------------------*/
-static ssize_t
-ds1307_nvram_read(struct file *filp, struct kobject *kobj,
- struct bin_attribute *attr,
- char *buf, loff_t off, size_t count)
+static int ds1307_nvram_read(void *priv, unsigned int offset, void *val,
+ size_t bytes)
{
- struct i2c_client *client;
- struct ds1307 *ds1307;
- int result;
+ struct ds1307 *ds1307 = priv;
- client = kobj_to_i2c_client(kobj);
- ds1307 = i2c_get_clientdata(client);
-
- result = ds1307->read_block_data(client, ds1307->nvram_offset + off,
- count, buf);
- if (result < 0)
- dev_err(&client->dev, "%s error %d\n", "nvram read", result);
- return result;
+ return regmap_bulk_read(ds1307->regmap, ds1307->nvram_offset + offset,
+ val, bytes);
}
-static ssize_t
-ds1307_nvram_write(struct file *filp, struct kobject *kobj,
- struct bin_attribute *attr,
- char *buf, loff_t off, size_t count)
+static int ds1307_nvram_write(void *priv, unsigned int offset, void *val,
+ size_t bytes)
{
- struct i2c_client *client;
- struct ds1307 *ds1307;
- int result;
+ struct ds1307 *ds1307 = priv;
- client = kobj_to_i2c_client(kobj);
- ds1307 = i2c_get_clientdata(client);
-
- result = ds1307->write_block_data(client, ds1307->nvram_offset + off,
- count, buf);
- if (result < 0) {
- dev_err(&client->dev, "%s error %d\n", "nvram write", result);
- return result;
- }
- return count;
+ return regmap_bulk_write(ds1307->regmap, ds1307->nvram_offset + offset,
+ val, bytes);
}
-
/*----------------------------------------------------------------------*/
-static u8 do_trickle_setup_ds1339(struct i2c_client *client,
+static u8 do_trickle_setup_ds1339(struct ds1307 *ds1307,
uint32_t ohms, bool diode)
{
u8 setup = (diode) ? DS1307_TRICKLE_CHARGER_DIODE :
@@ -963,14 +932,14 @@
setup |= DS1307_TRICKLE_CHARGER_4K_OHM;
break;
default:
- dev_warn(&client->dev,
+ dev_warn(ds1307->dev,
"Unsupported ohm value %u in dt\n", ohms);
return 0;
}
return setup;
}
-static void ds1307_trickle_init(struct i2c_client *client,
+static void ds1307_trickle_init(struct ds1307 *ds1307,
struct chip_desc *chip)
{
uint32_t ohms = 0;
@@ -978,11 +947,12 @@
if (!chip->do_trickle_setup)
goto out;
- if (device_property_read_u32(&client->dev, "trickle-resistor-ohms", &ohms))
+ if (device_property_read_u32(ds1307->dev, "trickle-resistor-ohms",
+ &ohms))
goto out;
- if (device_property_read_bool(&client->dev, "trickle-diode-disable"))
+ if (device_property_read_bool(ds1307->dev, "trickle-diode-disable"))
diode = false;
- chip->trickle_charger_setup = chip->do_trickle_setup(client,
+ chip->trickle_charger_setup = chip->do_trickle_setup(ds1307,
ohms, diode);
out:
return;
@@ -1009,13 +979,10 @@
s16 temp;
int ret;
- ret = ds1307->read_block_data(ds1307->client, DS3231_REG_TEMPERATURE,
- sizeof(temp_buf), temp_buf);
- if (ret < 0)
+ ret = regmap_bulk_read(ds1307->regmap, DS3231_REG_TEMPERATURE,
+ temp_buf, sizeof(temp_buf));
+ if (ret)
return ret;
- if (ret != sizeof(temp_buf))
- return -EIO;
-
/*
* Temperature is represented as a 10-bit code with a resolution of
* 0.25 degree celsius and encoded in two's complement format.
@@ -1055,12 +1022,11 @@
if (ds1307->type != ds_3231)
return;
- dev = devm_hwmon_device_register_with_groups(&ds1307->client->dev,
- ds1307->client->name,
+ dev = devm_hwmon_device_register_with_groups(ds1307->dev, ds1307->name,
ds1307, ds3231_hwmon_groups);
if (IS_ERR(dev)) {
- dev_warn(&ds1307->client->dev,
- "unable to register hwmon device %ld\n", PTR_ERR(dev));
+ dev_warn(ds1307->dev, "unable to register hwmon device %ld\n",
+ PTR_ERR(dev));
}
}
@@ -1099,24 +1065,12 @@
static int ds1337_write_control(struct ds1307 *ds1307, u8 mask, u8 value)
{
- struct i2c_client *client = ds1307->client;
struct mutex *lock = &ds1307->rtc->ops_lock;
- int control;
int ret;
mutex_lock(lock);
-
- control = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL);
- if (control < 0) {
- ret = control;
- goto out;
- }
-
- control &= ~mask;
- control |= value;
-
- ret = i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, control);
-out:
+ ret = regmap_update_bits(ds1307->regmap, DS1337_REG_CONTROL,
+ mask, value);
mutex_unlock(lock);
return ret;
@@ -1126,12 +1080,12 @@
unsigned long parent_rate)
{
struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
- int control;
+ int control, ret;
int rate_sel = 0;
- control = i2c_smbus_read_byte_data(ds1307->client, DS1337_REG_CONTROL);
- if (control < 0)
- return control;
+ ret = regmap_read(ds1307->regmap, DS1337_REG_CONTROL, &control);
+ if (ret)
+ return ret;
if (control & DS1337_BIT_RS1)
rate_sel += 1;
if (control & DS1337_BIT_RS2)
@@ -1195,11 +1149,11 @@
static int ds3231_clk_sqw_is_prepared(struct clk_hw *hw)
{
struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
- int control;
+ int control, ret;
- control = i2c_smbus_read_byte_data(ds1307->client, DS1337_REG_CONTROL);
- if (control < 0)
- return control;
+ ret = regmap_read(ds1307->regmap, DS1337_REG_CONTROL, &control);
+ if (ret)
+ return ret;
return !(control & DS1337_BIT_INTCN);
}
@@ -1221,26 +1175,13 @@
static int ds3231_clk_32khz_control(struct ds1307 *ds1307, bool enable)
{
- struct i2c_client *client = ds1307->client;
struct mutex *lock = &ds1307->rtc->ops_lock;
- int status;
int ret;
mutex_lock(lock);
-
- status = i2c_smbus_read_byte_data(client, DS1337_REG_STATUS);
- if (status < 0) {
- ret = status;
- goto out;
- }
-
- if (enable)
- status |= DS3231_BIT_EN32KHZ;
- else
- status &= ~DS3231_BIT_EN32KHZ;
-
- ret = i2c_smbus_write_byte_data(client, DS1337_REG_STATUS, status);
-out:
+ ret = regmap_update_bits(ds1307->regmap, DS1337_REG_STATUS,
+ DS3231_BIT_EN32KHZ,
+ enable ? DS3231_BIT_EN32KHZ : 0);
mutex_unlock(lock);
return ret;
@@ -1263,11 +1204,11 @@
static int ds3231_clk_32khz_is_prepared(struct clk_hw *hw)
{
struct ds1307 *ds1307 = clk_32khz_to_ds1307(hw);
- int status;
+ int status, ret;
- status = i2c_smbus_read_byte_data(ds1307->client, DS1337_REG_STATUS);
- if (status < 0)
- return status;
+ ret = regmap_read(ds1307->regmap, DS1337_REG_STATUS, &status);
+ if (ret)
+ return ret;
return !!(status & DS3231_BIT_EN32KHZ);
}
@@ -1292,18 +1233,17 @@
static int ds3231_clks_register(struct ds1307 *ds1307)
{
- struct i2c_client *client = ds1307->client;
- struct device_node *node = client->dev.of_node;
+ struct device_node *node = ds1307->dev->of_node;
struct clk_onecell_data *onecell;
int i;
- onecell = devm_kzalloc(&client->dev, sizeof(*onecell), GFP_KERNEL);
+ onecell = devm_kzalloc(ds1307->dev, sizeof(*onecell), GFP_KERNEL);
if (!onecell)
return -ENOMEM;
onecell->clk_num = ARRAY_SIZE(ds3231_clks_init);
- onecell->clks = devm_kcalloc(&client->dev, onecell->clk_num,
- sizeof(onecell->clks[0]), GFP_KERNEL);
+ onecell->clks = devm_kcalloc(ds1307->dev, onecell->clk_num,
+ sizeof(onecell->clks[0]), GFP_KERNEL);
if (!onecell->clks)
return -ENOMEM;
@@ -1322,8 +1262,8 @@
&init.name);
ds1307->clks[i].init = &init;
- onecell->clks[i] = devm_clk_register(&client->dev,
- &ds1307->clks[i]);
+ onecell->clks[i] = devm_clk_register(ds1307->dev,
+ &ds1307->clks[i]);
if (IS_ERR(onecell->clks[i]))
return PTR_ERR(onecell->clks[i]);
}
@@ -1345,8 +1285,8 @@
ret = ds3231_clks_register(ds1307);
if (ret) {
- dev_warn(&ds1307->client->dev,
- "unable to register clock device %d\n", ret);
+ dev_warn(ds1307->dev, "unable to register clock device %d\n",
+ ret);
}
}
@@ -1358,6 +1298,12 @@
#endif /* CONFIG_COMMON_CLK */
+static const struct regmap_config regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = 0x12,
+};
+
static int ds1307_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -1365,7 +1311,6 @@
int err = -ENODEV;
int tmp, wday;
struct chip_desc *chip;
- struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
bool want_irq = false;
bool ds1307_can_wakeup_device = false;
unsigned char *buf;
@@ -1382,17 +1327,22 @@
};
const struct rtc_class_ops *rtc_ops = &ds13xx_rtc_ops;
- if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)
- && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
- return -EIO;
-
ds1307 = devm_kzalloc(&client->dev, sizeof(struct ds1307), GFP_KERNEL);
if (!ds1307)
return -ENOMEM;
- i2c_set_clientdata(client, ds1307);
+ dev_set_drvdata(&client->dev, ds1307);
+ ds1307->dev = &client->dev;
+ ds1307->name = client->name;
+ ds1307->irq = client->irq;
- ds1307->client = client;
+ ds1307->regmap = devm_regmap_init_i2c(client, ®map_config);
+ if (IS_ERR(ds1307->regmap)) {
+ dev_err(ds1307->dev, "regmap allocation failed\n");
+ return PTR_ERR(ds1307->regmap);
+ }
+
+ i2c_set_clientdata(client, ds1307);
if (client->dev.of_node) {
ds1307->type = (enum ds_type)
@@ -1405,7 +1355,7 @@
const struct acpi_device_id *acpi_id;
acpi_id = acpi_match_device(ACPI_PTR(ds1307_acpi_ids),
- &client->dev);
+ ds1307->dev);
if (!acpi_id)
return -ENODEV;
chip = &chips[acpi_id->driver_data];
@@ -1413,27 +1363,21 @@
}
if (!pdata)
- ds1307_trickle_init(client, chip);
+ ds1307_trickle_init(ds1307, chip);
else if (pdata->trickle_charger_setup)
chip->trickle_charger_setup = pdata->trickle_charger_setup;
if (chip->trickle_charger_setup && chip->trickle_charger_reg) {
- dev_dbg(&client->dev, "writing trickle charger info 0x%x to 0x%x\n",
+ dev_dbg(ds1307->dev,
+ "writing trickle charger info 0x%x to 0x%x\n",
DS13XX_TRICKLE_CHARGER_MAGIC | chip->trickle_charger_setup,
chip->trickle_charger_reg);
- i2c_smbus_write_byte_data(client, chip->trickle_charger_reg,
+ regmap_write(ds1307->regmap, chip->trickle_charger_reg,
DS13XX_TRICKLE_CHARGER_MAGIC |
chip->trickle_charger_setup);
}
buf = ds1307->regs;
- if (i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) {
- ds1307->read_block_data = ds1307_native_smbus_read_block_data;
- ds1307->write_block_data = ds1307_native_smbus_write_block_data;
- } else {
- ds1307->read_block_data = ds1307_read_block_data;
- ds1307->write_block_data = ds1307_write_block_data;
- }
#ifdef CONFIG_OF
/*
@@ -1459,11 +1403,10 @@
case ds_1339:
case ds_3231:
/* get registers that the "rtc" read below won't read... */
- tmp = ds1307->read_block_data(ds1307->client,
- DS1337_REG_CONTROL, 2, buf);
- if (tmp != 2) {
- dev_dbg(&client->dev, "read error %d\n", tmp);
- err = -EIO;
+ err = regmap_bulk_read(ds1307->regmap, DS1337_REG_CONTROL,
+ buf, 2);
+ if (err) {
+ dev_dbg(ds1307->dev, "read error %d\n", err);
goto exit;
}
@@ -1477,8 +1420,8 @@
* For some variants, be sure alarms can trigger when we're
* running on Vbackup (BBSQI/BBSQW)
*/
- if (chip->alarm && (ds1307->client->irq > 0 ||
- ds1307_can_wakeup_device)) {
+ if (chip->alarm && (ds1307->irq > 0 ||
+ ds1307_can_wakeup_device)) {
ds1307->regs[0] |= DS1337_BIT_INTCN
| bbsqi_bitpos[ds1307->type];
ds1307->regs[0] &= ~(DS1337_BIT_A2IE | DS1337_BIT_A1IE);
@@ -1486,50 +1429,49 @@
want_irq = true;
}
- i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL,
- ds1307->regs[0]);
+ regmap_write(ds1307->regmap, DS1337_REG_CONTROL,
+ ds1307->regs[0]);
/* oscillator fault? clear flag, and warn */
if (ds1307->regs[1] & DS1337_BIT_OSF) {
- i2c_smbus_write_byte_data(client, DS1337_REG_STATUS,
- ds1307->regs[1] & ~DS1337_BIT_OSF);
- dev_warn(&client->dev, "SET TIME!\n");
+ regmap_write(ds1307->regmap, DS1337_REG_STATUS,
+ ds1307->regs[1] & ~DS1337_BIT_OSF);
+ dev_warn(ds1307->dev, "SET TIME!\n");
}
break;
case rx_8025:
- tmp = i2c_smbus_read_i2c_block_data(ds1307->client,
- RX8025_REG_CTRL1 << 4 | 0x08, 2, buf);
- if (tmp != 2) {
- dev_dbg(&client->dev, "read error %d\n", tmp);
- err = -EIO;
+ err = regmap_bulk_read(ds1307->regmap,
+ RX8025_REG_CTRL1 << 4 | 0x08, buf, 2);
+ if (err) {
+ dev_dbg(ds1307->dev, "read error %d\n", err);
goto exit;
}
/* oscillator off? turn it on, so clock can tick. */
if (!(ds1307->regs[1] & RX8025_BIT_XST)) {
ds1307->regs[1] |= RX8025_BIT_XST;
- i2c_smbus_write_byte_data(client,
- RX8025_REG_CTRL2 << 4 | 0x08,
- ds1307->regs[1]);
- dev_warn(&client->dev,
+ regmap_write(ds1307->regmap,
+ RX8025_REG_CTRL2 << 4 | 0x08,
+ ds1307->regs[1]);
+ dev_warn(ds1307->dev,
"oscillator stop detected - SET TIME!\n");
}
if (ds1307->regs[1] & RX8025_BIT_PON) {
ds1307->regs[1] &= ~RX8025_BIT_PON;
- i2c_smbus_write_byte_data(client,
- RX8025_REG_CTRL2 << 4 | 0x08,
- ds1307->regs[1]);
- dev_warn(&client->dev, "power-on detected\n");
+ regmap_write(ds1307->regmap,
+ RX8025_REG_CTRL2 << 4 | 0x08,
+ ds1307->regs[1]);
+ dev_warn(ds1307->dev, "power-on detected\n");
}
if (ds1307->regs[1] & RX8025_BIT_VDET) {
ds1307->regs[1] &= ~RX8025_BIT_VDET;
- i2c_smbus_write_byte_data(client,
- RX8025_REG_CTRL2 << 4 | 0x08,
- ds1307->regs[1]);
- dev_warn(&client->dev, "voltage drop detected\n");
+ regmap_write(ds1307->regmap,
+ RX8025_REG_CTRL2 << 4 | 0x08,
+ ds1307->regs[1]);
+ dev_warn(ds1307->dev, "voltage drop detected\n");
}
/* make sure we are running in 24hour mode */
@@ -1537,16 +1479,15 @@
u8 hour;
/* switch to 24 hour mode */
- i2c_smbus_write_byte_data(client,
- RX8025_REG_CTRL1 << 4 | 0x08,
- ds1307->regs[0] |
- RX8025_BIT_2412);
+ regmap_write(ds1307->regmap,
+ RX8025_REG_CTRL1 << 4 | 0x08,
+ ds1307->regs[0] | RX8025_BIT_2412);
- tmp = i2c_smbus_read_i2c_block_data(ds1307->client,
- RX8025_REG_CTRL1 << 4 | 0x08, 2, buf);
- if (tmp != 2) {
- dev_dbg(&client->dev, "read error %d\n", tmp);
- err = -EIO;
+ err = regmap_bulk_read(ds1307->regmap,
+ RX8025_REG_CTRL1 << 4 | 0x08,
+ buf, 2);
+ if (err) {
+ dev_dbg(ds1307->dev, "read error %d\n", err);
goto exit;
}
@@ -1557,9 +1498,16 @@
if (ds1307->regs[DS1307_REG_HOUR] & DS1307_BIT_PM)
hour += 12;
- i2c_smbus_write_byte_data(client,
- DS1307_REG_HOUR << 4 | 0x08,
- hour);
+ regmap_write(ds1307->regmap,
+ DS1307_REG_HOUR << 4 | 0x08, hour);
+ }
+ break;
+ case rx_8130:
+ ds1307->offset = 0x10; /* Seconds starts at 0x10 */
+ rtc_ops = &rx8130_rtc_ops;
+ if (chip->alarm && ds1307->irq > 0) {
+ irq_handler = rx8130_irq;
+ want_irq = true;
}
break;
case ds_1388:
@@ -1567,7 +1515,8 @@
break;
case mcp794xx:
rtc_ops = &mcp794xx_rtc_ops;
- if (ds1307->client->irq > 0 && chip->alarm) {
+ if (chip->alarm && (ds1307->irq > 0 ||
+ ds1307_can_wakeup_device)) {
irq_handler = mcp794xx_irq;
want_irq = true;
}
@@ -1578,10 +1527,9 @@
read_rtc:
/* read RTC registers */
- tmp = ds1307->read_block_data(ds1307->client, ds1307->offset, 8, buf);
- if (tmp != 8) {
- dev_dbg(&client->dev, "read error %d\n", tmp);
- err = -EIO;
+ err = regmap_bulk_read(ds1307->regmap, ds1307->offset, buf, 8);
+ if (err) {
+ dev_dbg(ds1307->dev, "read error %d\n", err);
goto exit;
}
@@ -1597,56 +1545,56 @@
case m41t00:
/* clock halted? turn it on, so clock can tick. */
if (tmp & DS1307_BIT_CH) {
- i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0);
- dev_warn(&client->dev, "SET TIME!\n");
+ regmap_write(ds1307->regmap, DS1307_REG_SECS, 0);
+ dev_warn(ds1307->dev, "SET TIME!\n");
goto read_rtc;
}
break;
+ case ds_1308:
case ds_1338:
/* clock halted? turn it on, so clock can tick. */
if (tmp & DS1307_BIT_CH)
- i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0);
+ regmap_write(ds1307->regmap, DS1307_REG_SECS, 0);
/* oscillator fault? clear flag, and warn */
if (ds1307->regs[DS1307_REG_CONTROL] & DS1338_BIT_OSF) {
- i2c_smbus_write_byte_data(client, DS1307_REG_CONTROL,
- ds1307->regs[DS1307_REG_CONTROL]
- & ~DS1338_BIT_OSF);
- dev_warn(&client->dev, "SET TIME!\n");
+ regmap_write(ds1307->regmap, DS1307_REG_CONTROL,
+ ds1307->regs[DS1307_REG_CONTROL] &
+ ~DS1338_BIT_OSF);
+ dev_warn(ds1307->dev, "SET TIME!\n");
goto read_rtc;
}
break;
case ds_1340:
/* clock halted? turn it on, so clock can tick. */
if (tmp & DS1340_BIT_nEOSC)
- i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0);
+ regmap_write(ds1307->regmap, DS1307_REG_SECS, 0);
- tmp = i2c_smbus_read_byte_data(client, DS1340_REG_FLAG);
- if (tmp < 0) {
- dev_dbg(&client->dev, "read error %d\n", tmp);
- err = -EIO;
+ err = regmap_read(ds1307->regmap, DS1340_REG_FLAG, &tmp);
+ if (err) {
+ dev_dbg(ds1307->dev, "read error %d\n", err);
goto exit;
}
/* oscillator fault? clear flag, and warn */
if (tmp & DS1340_BIT_OSF) {
- i2c_smbus_write_byte_data(client, DS1340_REG_FLAG, 0);
- dev_warn(&client->dev, "SET TIME!\n");
+ regmap_write(ds1307->regmap, DS1340_REG_FLAG, 0);
+ dev_warn(ds1307->dev, "SET TIME!\n");
}
break;
case mcp794xx:
/* make sure that the backup battery is enabled */
if (!(ds1307->regs[DS1307_REG_WDAY] & MCP794XX_BIT_VBATEN)) {
- i2c_smbus_write_byte_data(client, DS1307_REG_WDAY,
- ds1307->regs[DS1307_REG_WDAY]
- | MCP794XX_BIT_VBATEN);
+ regmap_write(ds1307->regmap, DS1307_REG_WDAY,
+ ds1307->regs[DS1307_REG_WDAY] |
+ MCP794XX_BIT_VBATEN);
}
/* clock halted? turn it on, so clock can tick. */
if (!(tmp & MCP794XX_BIT_ST)) {
- i2c_smbus_write_byte_data(client, DS1307_REG_SECS,
- MCP794XX_BIT_ST);
- dev_warn(&client->dev, "SET TIME!\n");
+ regmap_write(ds1307->regmap, DS1307_REG_SECS,
+ MCP794XX_BIT_ST);
+ dev_warn(ds1307->dev, "SET TIME!\n");
goto read_rtc;
}
@@ -1680,16 +1628,15 @@
tmp = 0;
if (ds1307->regs[DS1307_REG_HOUR] & DS1307_BIT_PM)
tmp += 12;
- i2c_smbus_write_byte_data(client,
- ds1307->offset + DS1307_REG_HOUR,
- bin2bcd(tmp));
+ regmap_write(ds1307->regmap, ds1307->offset + DS1307_REG_HOUR,
+ bin2bcd(tmp));
}
/*
* Some IPs have weekday reset value = 0x1 which might not correct
* hence compute the wday using the current date/month/year values
*/
- ds1307_get_time(&client->dev, &tm);
+ ds1307_get_time(ds1307->dev, &tm);
wday = tm.tm_wday;
timestamp = rtc_tm_to_time64(&tm);
rtc_time64_to_tm(timestamp, &tm);
@@ -1699,78 +1646,63 @@
* If different then set the wday which we computed using
* timestamp
*/
- if (wday != tm.tm_wday) {
- wday = i2c_smbus_read_byte_data(client, MCP794XX_REG_WEEKDAY);
- wday = wday & ~MCP794XX_REG_WEEKDAY_WDAY_MASK;
- wday = wday | (tm.tm_wday + 1);
- i2c_smbus_write_byte_data(client, MCP794XX_REG_WEEKDAY, wday);
- }
+ if (wday != tm.tm_wday)
+ regmap_update_bits(ds1307->regmap, MCP794XX_REG_WEEKDAY,
+ MCP794XX_REG_WEEKDAY_WDAY_MASK,
+ tm.tm_wday + 1);
if (want_irq) {
- device_set_wakeup_capable(&client->dev, true);
+ device_set_wakeup_capable(ds1307->dev, true);
set_bit(HAS_ALARM, &ds1307->flags);
}
- ds1307->rtc = devm_rtc_device_register(&client->dev, client->name,
- rtc_ops, THIS_MODULE);
+
+ ds1307->rtc = devm_rtc_allocate_device(ds1307->dev);
if (IS_ERR(ds1307->rtc)) {
return PTR_ERR(ds1307->rtc);
}
- if (ds1307_can_wakeup_device && ds1307->client->irq <= 0) {
+ if (ds1307_can_wakeup_device && ds1307->irq <= 0) {
/* Disable request for an IRQ */
want_irq = false;
- dev_info(&client->dev, "'wakeup-source' is set, request for an IRQ is disabled!\n");
+ dev_info(ds1307->dev,
+ "'wakeup-source' is set, request for an IRQ is disabled!\n");
/* We cannot support UIE mode if we do not have an IRQ line */
ds1307->rtc->uie_unsupported = 1;
}
if (want_irq) {
- err = devm_request_threaded_irq(&client->dev,
- client->irq, NULL, irq_handler,
+ err = devm_request_threaded_irq(ds1307->dev,
+ ds1307->irq, NULL, irq_handler,
IRQF_SHARED | IRQF_ONESHOT,
- ds1307->rtc->name, client);
+ ds1307->name, ds1307);
if (err) {
client->irq = 0;
- device_set_wakeup_capable(&client->dev, false);
+ device_set_wakeup_capable(ds1307->dev, false);
clear_bit(HAS_ALARM, &ds1307->flags);
- dev_err(&client->dev, "unable to request IRQ!\n");
+ dev_err(ds1307->dev, "unable to request IRQ!\n");
} else
- dev_dbg(&client->dev, "got IRQ %d\n", client->irq);
+ dev_dbg(ds1307->dev, "got IRQ %d\n", client->irq);
}
if (chip->nvram_size) {
+ ds1307->nvmem_cfg.name = "ds1307_nvram";
+ ds1307->nvmem_cfg.word_size = 1;
+ ds1307->nvmem_cfg.stride = 1;
+ ds1307->nvmem_cfg.size = chip->nvram_size;
+ ds1307->nvmem_cfg.reg_read = ds1307_nvram_read;
+ ds1307->nvmem_cfg.reg_write = ds1307_nvram_write;
+ ds1307->nvmem_cfg.priv = ds1307;
+ ds1307->nvram_offset = chip->nvram_offset;
- ds1307->nvram = devm_kzalloc(&client->dev,
- sizeof(struct bin_attribute),
- GFP_KERNEL);
- if (!ds1307->nvram) {
- dev_err(&client->dev, "cannot allocate memory for nvram sysfs\n");
- } else {
-
- ds1307->nvram->attr.name = "nvram";
- ds1307->nvram->attr.mode = S_IRUGO | S_IWUSR;
-
- sysfs_bin_attr_init(ds1307->nvram);
-
- ds1307->nvram->read = ds1307_nvram_read;
- ds1307->nvram->write = ds1307_nvram_write;
- ds1307->nvram->size = chip->nvram_size;
- ds1307->nvram_offset = chip->nvram_offset;
-
- err = sysfs_create_bin_file(&client->dev.kobj,
- ds1307->nvram);
- if (err) {
- dev_err(&client->dev,
- "unable to create sysfs file: %s\n",
- ds1307->nvram->attr.name);
- } else {
- set_bit(HAS_NVRAM, &ds1307->flags);
- dev_info(&client->dev, "%zu bytes nvram\n",
- ds1307->nvram->size);
- }
- }
+ ds1307->rtc->nvmem_config = &ds1307->nvmem_cfg;
+ ds1307->rtc->nvram_old_abi = true;
}
+ ds1307->rtc->ops = rtc_ops;
+ err = rtc_register_device(ds1307->rtc);
+ if (err)
+ return err;
+
ds1307_hwmon_register(ds1307);
ds1307_clks_register(ds1307);
@@ -1780,16 +1712,6 @@
return err;
}
-static int ds1307_remove(struct i2c_client *client)
-{
- struct ds1307 *ds1307 = i2c_get_clientdata(client);
-
- if (test_and_clear_bit(HAS_NVRAM, &ds1307->flags))
- sysfs_remove_bin_file(&client->dev.kobj, ds1307->nvram);
-
- return 0;
-}
-
static struct i2c_driver ds1307_driver = {
.driver = {
.name = "rtc-ds1307",
@@ -1797,7 +1719,6 @@
.acpi_match_table = ACPI_PTR(ds1307_acpi_ids),
},
.probe = ds1307_probe,
- .remove = ds1307_remove,
.id_table = ds1307_id,
};
diff --git a/drivers/rtc/rtc-ds3232.c b/drivers/rtc/rtc-ds3232.c
index deff431..0550f7b 100644
--- a/drivers/rtc/rtc-ds3232.c
+++ b/drivers/rtc/rtc-ds3232.c
@@ -22,6 +22,7 @@
#include <linux/bcd.h>
#include <linux/slab.h>
#include <linux/regmap.h>
+#include <linux/hwmon.h>
#define DS3232_REG_SECONDS 0x00
#define DS3232_REG_MINUTES 0x01
@@ -46,6 +47,8 @@
# define DS3232_REG_SR_A2F 0x02
# define DS3232_REG_SR_A1F 0x01
+#define DS3232_REG_TEMPERATURE 0x11
+
struct ds3232 {
struct device *dev;
struct regmap *regmap;
@@ -275,6 +278,120 @@
return ret;
}
+/*
+ * Temperature sensor support for ds3232/ds3234 devices.
+ * A user-initiated temperature conversion is not started by this function,
+ * so the temperature is updated once every 64 seconds.
+ */
+static int ds3232_hwmon_read_temp(struct device *dev, long int *mC)
+{
+ struct ds3232 *ds3232 = dev_get_drvdata(dev);
+ u8 temp_buf[2];
+ s16 temp;
+ int ret;
+
+ ret = regmap_bulk_read(ds3232->regmap, DS3232_REG_TEMPERATURE, temp_buf,
+ sizeof(temp_buf));
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Temperature is represented as a 10-bit code with a resolution of
+ * 0.25 degree celsius and encoded in two's complement format.
+ */
+ temp = (temp_buf[0] << 8) | temp_buf[1];
+ temp >>= 6;
+ *mC = temp * 250;
+
+ return 0;
+}
+
+static umode_t ds3232_hwmon_is_visible(const void *data,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ if (type != hwmon_temp)
+ return 0;
+
+ switch (attr) {
+ case hwmon_temp_input:
+ return 0444;
+ default:
+ return 0;
+ }
+}
+
+static int ds3232_hwmon_read(struct device *dev,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel, long *temp)
+{
+ int err;
+
+ switch (attr) {
+ case hwmon_temp_input:
+ err = ds3232_hwmon_read_temp(dev, temp);
+ break;
+ default:
+ err = -EOPNOTSUPP;
+ break;
+ }
+
+ return err;
+}
+
+static u32 ds3232_hwmon_chip_config[] = {
+ HWMON_C_REGISTER_TZ,
+ 0
+};
+
+static const struct hwmon_channel_info ds3232_hwmon_chip = {
+ .type = hwmon_chip,
+ .config = ds3232_hwmon_chip_config,
+};
+
+static u32 ds3232_hwmon_temp_config[] = {
+ HWMON_T_INPUT,
+ 0
+};
+
+static const struct hwmon_channel_info ds3232_hwmon_temp = {
+ .type = hwmon_temp,
+ .config = ds3232_hwmon_temp_config,
+};
+
+static const struct hwmon_channel_info *ds3232_hwmon_info[] = {
+ &ds3232_hwmon_chip,
+ &ds3232_hwmon_temp,
+ NULL
+};
+
+static const struct hwmon_ops ds3232_hwmon_hwmon_ops = {
+ .is_visible = ds3232_hwmon_is_visible,
+ .read = ds3232_hwmon_read,
+};
+
+static const struct hwmon_chip_info ds3232_hwmon_chip_info = {
+ .ops = &ds3232_hwmon_hwmon_ops,
+ .info = ds3232_hwmon_info,
+};
+
+static void ds3232_hwmon_register(struct device *dev, const char *name)
+{
+ struct ds3232 *ds3232 = dev_get_drvdata(dev);
+ struct device *hwmon_dev;
+
+ if (!IS_ENABLED(CONFIG_RTC_DRV_DS3232_HWMON))
+ return;
+
+ hwmon_dev = devm_hwmon_device_register_with_info(dev, name, ds3232,
+ &ds3232_hwmon_chip_info,
+ NULL);
+ if (IS_ERR(hwmon_dev)) {
+ dev_err(dev, "unable to register hwmon device %ld\n",
+ PTR_ERR(hwmon_dev));
+ }
+}
+
static int ds3232_alarm_irq_enable(struct device *dev, unsigned int enabled)
{
struct ds3232 *ds3232 = dev_get_drvdata(dev);
@@ -366,6 +483,8 @@
if (ds3232->irq > 0)
device_init_wakeup(dev, 1);
+ ds3232_hwmon_register(dev, name);
+
ds3232->rtc = devm_rtc_device_register(dev, name, &ds3232_rtc_ops,
THIS_MODULE);
if (IS_ERR(ds3232->rtc))
diff --git a/drivers/rtc/rtc-ftrtc010.c b/drivers/rtc/rtc-ftrtc010.c
new file mode 100644
index 0000000..af8d6be
--- /dev/null
+++ b/drivers/rtc/rtc-ftrtc010.c
@@ -0,0 +1,208 @@
+/*
+ * Faraday Technology FTRTC010 driver
+ *
+ * Copyright (C) 2009 Janos Laube <janos.dev@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Original code for older kernel 2.6.15 are from Stormlinksemi
+ * first update from Janos Laube for > 2.6.29 kernels
+ *
+ * checkpatch fixes and usage of rtc-lib code
+ * Hans Ulli Kroll <ulli.kroll@googlemail.com>
+ */
+
+#include <linux/rtc.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+
+#define DRV_NAME "rtc-ftrtc010"
+
+MODULE_AUTHOR("Hans Ulli Kroll <ulli.kroll@googlemail.com>");
+MODULE_DESCRIPTION("RTC driver for Gemini SoC");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
+
+struct ftrtc010_rtc {
+ struct rtc_device *rtc_dev;
+ void __iomem *rtc_base;
+ int rtc_irq;
+ struct clk *pclk;
+ struct clk *extclk;
+};
+
+enum ftrtc010_rtc_offsets {
+ FTRTC010_RTC_SECOND = 0x00,
+ FTRTC010_RTC_MINUTE = 0x04,
+ FTRTC010_RTC_HOUR = 0x08,
+ FTRTC010_RTC_DAYS = 0x0C,
+ FTRTC010_RTC_ALARM_SECOND = 0x10,
+ FTRTC010_RTC_ALARM_MINUTE = 0x14,
+ FTRTC010_RTC_ALARM_HOUR = 0x18,
+ FTRTC010_RTC_RECORD = 0x1C,
+ FTRTC010_RTC_CR = 0x20,
+};
+
+static irqreturn_t ftrtc010_rtc_interrupt(int irq, void *dev)
+{
+ return IRQ_HANDLED;
+}
+
+/*
+ * Looks like the RTC in the Gemini SoC is (totaly) broken
+ * We can't read/write directly the time from RTC registers.
+ * We must do some "offset" calculation to get the real time
+ *
+ * This FIX works pretty fine and Stormlinksemi aka Cortina-Networks does
+ * the same thing, without the rtc-lib.c calls.
+ */
+
+static int ftrtc010_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+ struct ftrtc010_rtc *rtc = dev_get_drvdata(dev);
+
+ unsigned int days, hour, min, sec;
+ unsigned long offset, time;
+
+ sec = readl(rtc->rtc_base + FTRTC010_RTC_SECOND);
+ min = readl(rtc->rtc_base + FTRTC010_RTC_MINUTE);
+ hour = readl(rtc->rtc_base + FTRTC010_RTC_HOUR);
+ days = readl(rtc->rtc_base + FTRTC010_RTC_DAYS);
+ offset = readl(rtc->rtc_base + FTRTC010_RTC_RECORD);
+
+ time = offset + days * 86400 + hour * 3600 + min * 60 + sec;
+
+ rtc_time_to_tm(time, tm);
+
+ return 0;
+}
+
+static int ftrtc010_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ struct ftrtc010_rtc *rtc = dev_get_drvdata(dev);
+ unsigned int sec, min, hour, day;
+ unsigned long offset, time;
+
+ if (tm->tm_year >= 2148) /* EPOCH Year + 179 */
+ return -EINVAL;
+
+ rtc_tm_to_time(tm, &time);
+
+ sec = readl(rtc->rtc_base + FTRTC010_RTC_SECOND);
+ min = readl(rtc->rtc_base + FTRTC010_RTC_MINUTE);
+ hour = readl(rtc->rtc_base + FTRTC010_RTC_HOUR);
+ day = readl(rtc->rtc_base + FTRTC010_RTC_DAYS);
+
+ offset = time - (day * 86400 + hour * 3600 + min * 60 + sec);
+
+ writel(offset, rtc->rtc_base + FTRTC010_RTC_RECORD);
+ writel(0x01, rtc->rtc_base + FTRTC010_RTC_CR);
+
+ return 0;
+}
+
+static const struct rtc_class_ops ftrtc010_rtc_ops = {
+ .read_time = ftrtc010_rtc_read_time,
+ .set_time = ftrtc010_rtc_set_time,
+};
+
+static int ftrtc010_rtc_probe(struct platform_device *pdev)
+{
+ struct ftrtc010_rtc *rtc;
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ int ret;
+
+ rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
+ if (unlikely(!rtc))
+ return -ENOMEM;
+ platform_set_drvdata(pdev, rtc);
+
+ rtc->pclk = devm_clk_get(dev, "PCLK");
+ if (IS_ERR(rtc->pclk)) {
+ dev_err(dev, "could not get PCLK\n");
+ } else {
+ ret = clk_prepare_enable(rtc->pclk);
+ if (ret) {
+ dev_err(dev, "failed to enable PCLK\n");
+ return ret;
+ }
+ }
+ rtc->extclk = devm_clk_get(dev, "EXTCLK");
+ if (IS_ERR(rtc->extclk)) {
+ dev_err(dev, "could not get EXTCLK\n");
+ } else {
+ ret = clk_prepare_enable(rtc->extclk);
+ if (ret) {
+ dev_err(dev, "failed to enable EXTCLK\n");
+ return ret;
+ }
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!res)
+ return -ENODEV;
+
+ rtc->rtc_irq = res->start;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+
+ rtc->rtc_base = devm_ioremap(dev, res->start,
+ resource_size(res));
+ if (!rtc->rtc_base)
+ return -ENOMEM;
+
+ ret = devm_request_irq(dev, rtc->rtc_irq, ftrtc010_rtc_interrupt,
+ IRQF_SHARED, pdev->name, dev);
+ if (unlikely(ret))
+ return ret;
+
+ rtc->rtc_dev = rtc_device_register(pdev->name, dev,
+ &ftrtc010_rtc_ops, THIS_MODULE);
+ return PTR_ERR_OR_ZERO(rtc->rtc_dev);
+}
+
+static int ftrtc010_rtc_remove(struct platform_device *pdev)
+{
+ struct ftrtc010_rtc *rtc = platform_get_drvdata(pdev);
+
+ if (!IS_ERR(rtc->extclk))
+ clk_disable_unprepare(rtc->extclk);
+ if (!IS_ERR(rtc->pclk))
+ clk_disable_unprepare(rtc->pclk);
+ rtc_device_unregister(rtc->rtc_dev);
+
+ return 0;
+}
+
+static const struct of_device_id ftrtc010_rtc_dt_match[] = {
+ { .compatible = "cortina,gemini-rtc" },
+ { .compatible = "faraday,ftrtc010" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ftrtc010_rtc_dt_match);
+
+static struct platform_driver ftrtc010_rtc_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .of_match_table = ftrtc010_rtc_dt_match,
+ },
+ .probe = ftrtc010_rtc_probe,
+ .remove = ftrtc010_rtc_remove,
+};
+
+module_platform_driver_probe(ftrtc010_rtc_driver, ftrtc010_rtc_probe);
diff --git a/drivers/rtc/rtc-gemini.c b/drivers/rtc/rtc-gemini.c
deleted file mode 100644
index 5279390..0000000
--- a/drivers/rtc/rtc-gemini.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * Gemini OnChip RTC
- *
- * Copyright (C) 2009 Janos Laube <janos.dev@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Original code for older kernel 2.6.15 are from Stormlinksemi
- * first update from Janos Laube for > 2.6.29 kernels
- *
- * checkpatch fixes and usage of rtc-lib code
- * Hans Ulli Kroll <ulli.kroll@googlemail.com>
- */
-
-#include <linux/rtc.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#define DRV_NAME "rtc-gemini"
-
-MODULE_AUTHOR("Hans Ulli Kroll <ulli.kroll@googlemail.com>");
-MODULE_DESCRIPTION("RTC driver for Gemini SoC");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:" DRV_NAME);
-
-struct gemini_rtc {
- struct rtc_device *rtc_dev;
- void __iomem *rtc_base;
- int rtc_irq;
-};
-
-enum gemini_rtc_offsets {
- GEMINI_RTC_SECOND = 0x00,
- GEMINI_RTC_MINUTE = 0x04,
- GEMINI_RTC_HOUR = 0x08,
- GEMINI_RTC_DAYS = 0x0C,
- GEMINI_RTC_ALARM_SECOND = 0x10,
- GEMINI_RTC_ALARM_MINUTE = 0x14,
- GEMINI_RTC_ALARM_HOUR = 0x18,
- GEMINI_RTC_RECORD = 0x1C,
- GEMINI_RTC_CR = 0x20
-};
-
-static irqreturn_t gemini_rtc_interrupt(int irq, void *dev)
-{
- return IRQ_HANDLED;
-}
-
-/*
- * Looks like the RTC in the Gemini SoC is (totaly) broken
- * We can't read/write directly the time from RTC registers.
- * We must do some "offset" calculation to get the real time
- *
- * This FIX works pretty fine and Stormlinksemi aka Cortina-Networks does
- * the same thing, without the rtc-lib.c calls.
- */
-
-static int gemini_rtc_read_time(struct device *dev, struct rtc_time *tm)
-{
- struct gemini_rtc *rtc = dev_get_drvdata(dev);
-
- unsigned int days, hour, min, sec;
- unsigned long offset, time;
-
- sec = readl(rtc->rtc_base + GEMINI_RTC_SECOND);
- min = readl(rtc->rtc_base + GEMINI_RTC_MINUTE);
- hour = readl(rtc->rtc_base + GEMINI_RTC_HOUR);
- days = readl(rtc->rtc_base + GEMINI_RTC_DAYS);
- offset = readl(rtc->rtc_base + GEMINI_RTC_RECORD);
-
- time = offset + days * 86400 + hour * 3600 + min * 60 + sec;
-
- rtc_time_to_tm(time, tm);
-
- return 0;
-}
-
-static int gemini_rtc_set_time(struct device *dev, struct rtc_time *tm)
-{
- struct gemini_rtc *rtc = dev_get_drvdata(dev);
- unsigned int sec, min, hour, day;
- unsigned long offset, time;
-
- if (tm->tm_year >= 2148) /* EPOCH Year + 179 */
- return -EINVAL;
-
- rtc_tm_to_time(tm, &time);
-
- sec = readl(rtc->rtc_base + GEMINI_RTC_SECOND);
- min = readl(rtc->rtc_base + GEMINI_RTC_MINUTE);
- hour = readl(rtc->rtc_base + GEMINI_RTC_HOUR);
- day = readl(rtc->rtc_base + GEMINI_RTC_DAYS);
-
- offset = time - (day * 86400 + hour * 3600 + min * 60 + sec);
-
- writel(offset, rtc->rtc_base + GEMINI_RTC_RECORD);
- writel(0x01, rtc->rtc_base + GEMINI_RTC_CR);
-
- return 0;
-}
-
-static const struct rtc_class_ops gemini_rtc_ops = {
- .read_time = gemini_rtc_read_time,
- .set_time = gemini_rtc_set_time,
-};
-
-static int gemini_rtc_probe(struct platform_device *pdev)
-{
- struct gemini_rtc *rtc;
- struct device *dev = &pdev->dev;
- struct resource *res;
- int ret;
-
- rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
- if (unlikely(!rtc))
- return -ENOMEM;
- platform_set_drvdata(pdev, rtc);
-
- res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!res)
- return -ENODEV;
-
- rtc->rtc_irq = res->start;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- return -ENODEV;
-
- rtc->rtc_base = devm_ioremap(dev, res->start,
- resource_size(res));
- if (!rtc->rtc_base)
- return -ENOMEM;
-
- ret = devm_request_irq(dev, rtc->rtc_irq, gemini_rtc_interrupt,
- IRQF_SHARED, pdev->name, dev);
- if (unlikely(ret))
- return ret;
-
- rtc->rtc_dev = rtc_device_register(pdev->name, dev,
- &gemini_rtc_ops, THIS_MODULE);
- return PTR_ERR_OR_ZERO(rtc->rtc_dev);
-}
-
-static int gemini_rtc_remove(struct platform_device *pdev)
-{
- struct gemini_rtc *rtc = platform_get_drvdata(pdev);
-
- rtc_device_unregister(rtc->rtc_dev);
-
- return 0;
-}
-
-static const struct of_device_id gemini_rtc_dt_match[] = {
- { .compatible = "cortina,gemini-rtc" },
- { }
-};
-MODULE_DEVICE_TABLE(of, gemini_rtc_dt_match);
-
-static struct platform_driver gemini_rtc_driver = {
- .driver = {
- .name = DRV_NAME,
- .of_match_table = gemini_rtc_dt_match,
- },
- .probe = gemini_rtc_probe,
- .remove = gemini_rtc_remove,
-};
-
-module_platform_driver_probe(gemini_rtc_driver, gemini_rtc_probe);
diff --git a/drivers/rtc/rtc-m41t80.c b/drivers/rtc/rtc-m41t80.c
index 5ec4653..8940e9e 100644
--- a/drivers/rtc/rtc-m41t80.c
+++ b/drivers/rtc/rtc-m41t80.c
@@ -16,6 +16,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/bcd.h>
+#include <linux/clk-provider.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/kernel.h>
@@ -53,6 +54,8 @@
#define M41T80_ALARM_REG_SIZE \
(M41T80_REG_ALARM_SEC + 1 - M41T80_REG_ALARM_MON)
+#define M41T80_SQW_MAX_FREQ 32768
+
#define M41T80_SEC_ST BIT(7) /* ST: Stop Bit */
#define M41T80_ALMON_AFE BIT(7) /* AFE: AF Enable Bit */
#define M41T80_ALMON_SQWE BIT(6) /* SQWE: SQW Enable Bit */
@@ -147,7 +150,11 @@
struct m41t80_data {
unsigned long features;
+ struct i2c_client *client;
struct rtc_device *rtc;
+#ifdef CONFIG_COMMON_CLK
+ struct clk_hw sqw;
+#endif
};
static irqreturn_t m41t80_handle_irq(int irq, void *dev_id)
@@ -227,6 +234,7 @@
/* Sets the given date and time to the real time clock. */
static int m41t80_set_datetime(struct i2c_client *client, struct rtc_time *tm)
{
+ struct m41t80_data *clientdata = i2c_get_clientdata(client);
unsigned char buf[8];
int err, flags;
@@ -242,6 +250,17 @@
buf[M41T80_REG_YEAR] = bin2bcd(tm->tm_year - 100);
buf[M41T80_REG_WDAY] = tm->tm_wday;
+ /* If the square wave output is controlled in the weekday register */
+ if (clientdata->features & M41T80_FEATURE_SQ_ALT) {
+ int val;
+
+ val = i2c_smbus_read_byte_data(client, M41T80_REG_WDAY);
+ if (val < 0)
+ return val;
+
+ buf[M41T80_REG_WDAY] |= (val & 0xf0);
+ }
+
err = i2c_smbus_write_i2c_block_data(client, M41T80_REG_SSEC,
sizeof(buf), buf);
if (err < 0) {
@@ -332,6 +351,9 @@
return err;
}
+ /* Keep SQWE bit value */
+ alarmvals[0] |= (ret & M41T80_ALMON_SQWE);
+
ret = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
if (ret < 0)
return ret;
@@ -431,96 +453,8 @@
}
static DEVICE_ATTR_RO(flags);
-static ssize_t sqwfreq_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct i2c_client *client = to_i2c_client(dev);
- struct m41t80_data *clientdata = i2c_get_clientdata(client);
- int val, reg_sqw;
-
- if (!(clientdata->features & M41T80_FEATURE_SQ))
- return -EINVAL;
-
- reg_sqw = M41T80_REG_SQW;
- if (clientdata->features & M41T80_FEATURE_SQ_ALT)
- reg_sqw = M41T80_REG_WDAY;
- val = i2c_smbus_read_byte_data(client, reg_sqw);
- if (val < 0)
- return val;
- val = (val >> 4) & 0xf;
- switch (val) {
- case 0:
- break;
- case 1:
- val = 32768;
- break;
- default:
- val = 32768 >> val;
- }
- return sprintf(buf, "%d\n", val);
-}
-
-static ssize_t sqwfreq_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct i2c_client *client = to_i2c_client(dev);
- struct m41t80_data *clientdata = i2c_get_clientdata(client);
- int almon, sqw, reg_sqw, rc;
- unsigned long val;
-
- rc = kstrtoul(buf, 0, &val);
- if (rc < 0)
- return rc;
-
- if (!(clientdata->features & M41T80_FEATURE_SQ))
- return -EINVAL;
-
- if (val) {
- if (!is_power_of_2(val))
- return -EINVAL;
- val = ilog2(val);
- if (val == 15)
- val = 1;
- else if (val < 14)
- val = 15 - val;
- else
- return -EINVAL;
- }
- /* disable SQW, set SQW frequency & re-enable */
- almon = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON);
- if (almon < 0)
- return almon;
- reg_sqw = M41T80_REG_SQW;
- if (clientdata->features & M41T80_FEATURE_SQ_ALT)
- reg_sqw = M41T80_REG_WDAY;
- sqw = i2c_smbus_read_byte_data(client, reg_sqw);
- if (sqw < 0)
- return sqw;
- sqw = (sqw & 0x0f) | (val << 4);
-
- rc = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON,
- almon & ~M41T80_ALMON_SQWE);
- if (rc < 0)
- return rc;
-
- if (val) {
- rc = i2c_smbus_write_byte_data(client, reg_sqw, sqw);
- if (rc < 0)
- return rc;
-
- rc = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON,
- almon | M41T80_ALMON_SQWE);
- if (rc < 0)
- return rc;
- }
- return count;
-}
-static DEVICE_ATTR_RW(sqwfreq);
-
static struct attribute *attrs[] = {
&dev_attr_flags.attr,
- &dev_attr_sqwfreq.attr,
NULL,
};
@@ -528,6 +462,166 @@
.attrs = attrs,
};
+#ifdef CONFIG_COMMON_CLK
+#define sqw_to_m41t80_data(_hw) container_of(_hw, struct m41t80_data, sqw)
+
+static unsigned long m41t80_sqw_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct m41t80_data *m41t80 = sqw_to_m41t80_data(hw);
+ struct i2c_client *client = m41t80->client;
+ int reg_sqw = (m41t80->features & M41T80_FEATURE_SQ_ALT) ?
+ M41T80_REG_WDAY : M41T80_REG_SQW;
+ int ret = i2c_smbus_read_byte_data(client, reg_sqw);
+ unsigned long val = M41T80_SQW_MAX_FREQ;
+
+ if (ret < 0)
+ return 0;
+
+ ret >>= 4;
+ if (ret == 0)
+ val = 0;
+ else if (ret > 1)
+ val = val / (1 << ret);
+
+ return val;
+}
+
+static long m41t80_sqw_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ int i, freq = M41T80_SQW_MAX_FREQ;
+
+ if (freq <= rate)
+ return freq;
+
+ for (i = 2; i <= ilog2(M41T80_SQW_MAX_FREQ); i++) {
+ freq /= 1 << i;
+ if (freq <= rate)
+ return freq;
+ }
+
+ return 0;
+}
+
+static int m41t80_sqw_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct m41t80_data *m41t80 = sqw_to_m41t80_data(hw);
+ struct i2c_client *client = m41t80->client;
+ int reg_sqw = (m41t80->features & M41T80_FEATURE_SQ_ALT) ?
+ M41T80_REG_WDAY : M41T80_REG_SQW;
+ int reg, ret, val = 0;
+
+ if (rate) {
+ if (!is_power_of_2(rate))
+ return -EINVAL;
+ val = ilog2(rate);
+ if (val == ilog2(M41T80_SQW_MAX_FREQ))
+ val = 1;
+ else if (val < (ilog2(M41T80_SQW_MAX_FREQ) - 1))
+ val = ilog2(M41T80_SQW_MAX_FREQ) - val;
+ else
+ return -EINVAL;
+ }
+
+ reg = i2c_smbus_read_byte_data(client, reg_sqw);
+ if (reg < 0)
+ return reg;
+
+ reg = (reg & 0x0f) | (val << 4);
+
+ ret = i2c_smbus_write_byte_data(client, reg_sqw, reg);
+ if (ret < 0)
+ return ret;
+
+ return -EINVAL;
+}
+
+static int m41t80_sqw_control(struct clk_hw *hw, bool enable)
+{
+ struct m41t80_data *m41t80 = sqw_to_m41t80_data(hw);
+ struct i2c_client *client = m41t80->client;
+ int ret = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON);
+
+ if (ret < 0)
+ return ret;
+
+ if (enable)
+ ret |= M41T80_ALMON_SQWE;
+ else
+ ret &= ~M41T80_ALMON_SQWE;
+
+ return i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON, ret);
+}
+
+static int m41t80_sqw_prepare(struct clk_hw *hw)
+{
+ return m41t80_sqw_control(hw, 1);
+}
+
+static void m41t80_sqw_unprepare(struct clk_hw *hw)
+{
+ m41t80_sqw_control(hw, 0);
+}
+
+static int m41t80_sqw_is_prepared(struct clk_hw *hw)
+{
+ struct m41t80_data *m41t80 = sqw_to_m41t80_data(hw);
+ struct i2c_client *client = m41t80->client;
+ int ret = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON);
+
+ if (ret < 0)
+ return ret;
+
+ return !!(ret & M41T80_ALMON_SQWE);
+}
+
+static const struct clk_ops m41t80_sqw_ops = {
+ .prepare = m41t80_sqw_prepare,
+ .unprepare = m41t80_sqw_unprepare,
+ .is_prepared = m41t80_sqw_is_prepared,
+ .recalc_rate = m41t80_sqw_recalc_rate,
+ .round_rate = m41t80_sqw_round_rate,
+ .set_rate = m41t80_sqw_set_rate,
+};
+
+static struct clk *m41t80_sqw_register_clk(struct m41t80_data *m41t80)
+{
+ struct i2c_client *client = m41t80->client;
+ struct device_node *node = client->dev.of_node;
+ struct clk *clk;
+ struct clk_init_data init;
+ int ret;
+
+ /* First disable the clock */
+ ret = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON);
+ if (ret < 0)
+ return ERR_PTR(ret);
+ ret = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON,
+ ret & ~(M41T80_ALMON_SQWE));
+ if (ret < 0)
+ return ERR_PTR(ret);
+
+ init.name = "m41t80-sqw";
+ init.ops = &m41t80_sqw_ops;
+ init.flags = 0;
+ init.parent_names = NULL;
+ init.num_parents = 0;
+ m41t80->sqw.init = &init;
+
+ /* optional override of the clockname */
+ of_property_read_string(node, "clock-output-names", &init.name);
+
+ /* register the clock */
+ clk = clk_register(&client->dev, &m41t80->sqw);
+ if (!IS_ERR(clk))
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+
+ return clk;
+}
+#endif
+
#ifdef CONFIG_RTC_DRV_M41T80_WDT
/*
*****************************************************************************
@@ -845,6 +939,7 @@
if (!m41t80_data)
return -ENOMEM;
+ m41t80_data->client = client;
if (client->dev.of_node)
m41t80_data->features = (unsigned long)
of_device_get_match_data(&client->dev);
@@ -937,6 +1032,10 @@
}
}
#endif
+#ifdef CONFIG_COMMON_CLK
+ if (m41t80_data->features & M41T80_FEATURE_SQ)
+ m41t80_sqw_register_clk(m41t80_data);
+#endif
return 0;
}
diff --git a/drivers/rtc/rtc-mxc.c b/drivers/rtc/rtc-mxc.c
index 7731912..401f46d 100644
--- a/drivers/rtc/rtc-mxc.c
+++ b/drivers/rtc/rtc-mxc.c
@@ -43,17 +43,6 @@
#define MAX_PIE_NUM 9
#define MAX_PIE_FREQ 512
-static const u32 PIE_BIT_DEF[MAX_PIE_NUM][2] = {
- { 2, RTC_2HZ_BIT },
- { 4, RTC_SAM0_BIT },
- { 8, RTC_SAM1_BIT },
- { 16, RTC_SAM2_BIT },
- { 32, RTC_SAM3_BIT },
- { 64, RTC_SAM4_BIT },
- { 128, RTC_SAM5_BIT },
- { 256, RTC_SAM6_BIT },
- { MAX_PIE_FREQ, RTC_SAM7_BIT },
-};
#define MXC_RTC_TIME 0
#define MXC_RTC_ALARM 1
diff --git a/drivers/rtc/rtc-nuc900.c b/drivers/rtc/rtc-nuc900.c
index b1b6b30..4ed8111 100644
--- a/drivers/rtc/rtc-nuc900.c
+++ b/drivers/rtc/rtc-nuc900.c
@@ -93,7 +93,7 @@
__raw_writel(AERPOWERON, nuc900_rtc->rtc_reg + REG_RTC_AER);
while (!(__raw_readl(nuc900_rtc->rtc_reg + REG_RTC_AER) & AERRWENB)
- && timeout--)
+ && --timeout)
mdelay(1);
if (!timeout)
diff --git a/drivers/rtc/rtc-opal.c b/drivers/rtc/rtc-opal.c
index ea20f62..e2a946c 100644
--- a/drivers/rtc/rtc-opal.c
+++ b/drivers/rtc/rtc-opal.c
@@ -142,6 +142,16 @@
y_m_d = be32_to_cpu(__y_m_d);
h_m_s_ms = ((u64)be32_to_cpu(__h_m) << 32);
+
+ /* check if no alarm is set */
+ if (y_m_d == 0 && h_m_s_ms == 0) {
+ pr_debug("No alarm is set\n");
+ rc = -ENOENT;
+ goto exit;
+ } else {
+ pr_debug("Alarm set to %x %llx\n", y_m_d, h_m_s_ms);
+ }
+
opal_to_tm(y_m_d, h_m_s_ms, &alarm->time);
exit:
@@ -157,7 +167,14 @@
u32 y_m_d = 0;
int token, rc;
- tm_to_opal(&alarm->time, &y_m_d, &h_m_s_ms);
+ /* if alarm is enabled */
+ if (alarm->enabled) {
+ tm_to_opal(&alarm->time, &y_m_d, &h_m_s_ms);
+ pr_debug("Alarm set to %x %llx\n", y_m_d, h_m_s_ms);
+
+ } else {
+ pr_debug("Alarm getting disabled\n");
+ }
token = opal_async_get_token_interruptible();
if (token < 0) {
@@ -190,6 +207,18 @@
return rc;
}
+int opal_tpo_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+ struct rtc_wkalrm alarm = { .enabled = 0 };
+
+ /*
+ * TPO is automatically enabled when opal_set_tpo_time() is called with
+ * non-zero rtc-time. We only handle disable case which needs to be
+ * explicitly told to opal.
+ */
+ return enabled ? 0 : opal_set_tpo_time(dev, &alarm);
+}
+
static struct rtc_class_ops opal_rtc_ops = {
.read_time = opal_get_rtc_time,
.set_time = opal_set_rtc_time,
@@ -205,6 +234,7 @@
device_set_wakeup_capable(&pdev->dev, true);
opal_rtc_ops.read_alarm = opal_get_tpo_time;
opal_rtc_ops.set_alarm = opal_set_tpo_time;
+ opal_rtc_ops.alarm_irq_enable = opal_tpo_alarm_irq_enable;
}
rtc = devm_rtc_device_register(&pdev->dev, DRVNAME, &opal_rtc_ops,
diff --git a/drivers/rtc/rtc-pcf8563.c b/drivers/rtc/rtc-pcf8563.c
index 1227cea..cea6ea4 100644
--- a/drivers/rtc/rtc-pcf8563.c
+++ b/drivers/rtc/rtc-pcf8563.c
@@ -606,7 +606,7 @@
err = devm_request_threaded_irq(&client->dev, client->irq,
NULL, pcf8563_irq,
IRQF_SHARED|IRQF_ONESHOT|IRQF_TRIGGER_FALLING,
- pcf8563->rtc->name, client);
+ pcf8563_driver.driver.name, client);
if (err) {
dev_err(&client->dev, "unable to request IRQ %d\n",
client->irq);
diff --git a/drivers/rtc/rtc-rv8803.c b/drivers/rtc/rtc-rv8803.c
index 9ad97ab..aae2576 100644
--- a/drivers/rtc/rtc-rv8803.c
+++ b/drivers/rtc/rtc-rv8803.c
@@ -68,6 +68,7 @@
struct mutex flags_lock;
u8 ctrl;
enum rv8803_type type;
+ struct nvmem_config nvmem_cfg;
};
static int rv8803_read_reg(const struct i2c_client *client, u8 reg)
@@ -460,48 +461,32 @@
}
}
-static ssize_t rv8803_nvram_write(struct file *filp, struct kobject *kobj,
- struct bin_attribute *attr,
- char *buf, loff_t off, size_t count)
+static int rv8803_nvram_write(void *priv, unsigned int offset, void *val,
+ size_t bytes)
{
- struct device *dev = kobj_to_dev(kobj);
- struct i2c_client *client = to_i2c_client(dev);
int ret;
- ret = rv8803_write_reg(client, RV8803_RAM, buf[0]);
+ ret = rv8803_write_reg(priv, RV8803_RAM, *(u8 *)val);
if (ret)
return ret;
- return 1;
+ return 0;
}
-static ssize_t rv8803_nvram_read(struct file *filp, struct kobject *kobj,
- struct bin_attribute *attr,
- char *buf, loff_t off, size_t count)
+static int rv8803_nvram_read(void *priv, unsigned int offset,
+ void *val, size_t bytes)
{
- struct device *dev = kobj_to_dev(kobj);
- struct i2c_client *client = to_i2c_client(dev);
int ret;
- ret = rv8803_read_reg(client, RV8803_RAM);
+ ret = rv8803_read_reg(priv, RV8803_RAM);
if (ret < 0)
return ret;
- buf[0] = ret;
+ *(u8 *)val = ret;
- return 1;
+ return 0;
}
-static struct bin_attribute rv8803_nvram_attr = {
- .attr = {
- .name = "nvram",
- .mode = S_IRUGO | S_IWUSR,
- },
- .size = 1,
- .read = rv8803_nvram_read,
- .write = rv8803_nvram_write,
-};
-
static struct rtc_class_ops rv8803_rtc_ops = {
.read_time = rv8803_get_time,
.set_time = rv8803_set_time,
@@ -577,6 +562,11 @@
if (flags & RV8803_FLAG_AF)
dev_warn(&client->dev, "An alarm maybe have been missed.\n");
+ rv8803->rtc = devm_rtc_allocate_device(&client->dev);
+ if (IS_ERR(rv8803->rtc)) {
+ return PTR_ERR(rv8803->rtc);
+ }
+
if (client->irq > 0) {
err = devm_request_threaded_irq(&client->dev, client->irq,
NULL, rv8803_handle_irq,
@@ -592,12 +582,20 @@
}
}
- rv8803->rtc = devm_rtc_device_register(&client->dev, client->name,
- &rv8803_rtc_ops, THIS_MODULE);
- if (IS_ERR(rv8803->rtc)) {
- dev_err(&client->dev, "unable to register the class device\n");
- return PTR_ERR(rv8803->rtc);
- }
+ rv8803->nvmem_cfg.name = "rv8803_nvram",
+ rv8803->nvmem_cfg.word_size = 1,
+ rv8803->nvmem_cfg.stride = 1,
+ rv8803->nvmem_cfg.size = 1,
+ rv8803->nvmem_cfg.reg_read = rv8803_nvram_read,
+ rv8803->nvmem_cfg.reg_write = rv8803_nvram_write,
+ rv8803->nvmem_cfg.priv = client;
+
+ rv8803->rtc->ops = &rv8803_rtc_ops;
+ rv8803->rtc->nvmem_config = &rv8803->nvmem_cfg;
+ rv8803->rtc->nvram_old_abi = true;
+ err = rtc_register_device(rv8803->rtc);
+ if (err)
+ return err;
err = rv8803_write_reg(rv8803->client, RV8803_EXT, RV8803_EXT_WADA);
if (err)
@@ -609,22 +607,11 @@
return err;
}
- err = device_create_bin_file(&client->dev, &rv8803_nvram_attr);
- if (err)
- return err;
-
rv8803->rtc->max_user_freq = 1;
return 0;
}
-static int rv8803_remove(struct i2c_client *client)
-{
- device_remove_bin_file(&client->dev, &rv8803_nvram_attr);
-
- return 0;
-}
-
static const struct i2c_device_id rv8803_id[] = {
{ "rv8803", rv_8803 },
{ "rx8900", rx_8900 },
@@ -651,7 +638,6 @@
.of_match_table = of_match_ptr(rv8803_of_match),
},
.probe = rv8803_probe,
- .remove = rv8803_remove,
.id_table = rv8803_id,
};
module_i2c_driver(rv8803_driver);
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index d44fb34..a8992c2 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -41,7 +41,7 @@
struct clk *rtc_src_clk;
bool clk_disabled;
- struct s3c_rtc_data *data;
+ const struct s3c_rtc_data *data;
int irq_alarm;
int irq_tick;
@@ -49,7 +49,8 @@
spinlock_t pie_lock;
spinlock_t alarm_clk_lock;
- int ticnt_save, ticnt_en_save;
+ int ticnt_save;
+ int ticnt_en_save;
bool wake_en;
};
@@ -67,18 +68,32 @@
void (*disable) (struct s3c_rtc *info);
};
-static void s3c_rtc_enable_clk(struct s3c_rtc *info)
+static int s3c_rtc_enable_clk(struct s3c_rtc *info)
{
unsigned long irq_flags;
+ int ret = 0;
spin_lock_irqsave(&info->alarm_clk_lock, irq_flags);
+
if (info->clk_disabled) {
- clk_enable(info->rtc_clk);
- if (info->data->needs_src_clk)
- clk_enable(info->rtc_src_clk);
+ ret = clk_enable(info->rtc_clk);
+ if (ret)
+ goto out;
+
+ if (info->data->needs_src_clk) {
+ ret = clk_enable(info->rtc_src_clk);
+ if (ret) {
+ clk_disable(info->rtc_clk);
+ goto out;
+ }
+ }
info->clk_disabled = false;
}
+
+out:
spin_unlock_irqrestore(&info->alarm_clk_lock, irq_flags);
+
+ return ret;
}
static void s3c_rtc_disable_clk(struct s3c_rtc *info)
@@ -121,10 +136,13 @@
{
struct s3c_rtc *info = dev_get_drvdata(dev);
unsigned int tmp;
+ int ret;
dev_dbg(info->dev, "%s: aie=%d\n", __func__, enabled);
- s3c_rtc_enable_clk(info);
+ ret = s3c_rtc_enable_clk(info);
+ if (ret)
+ return ret;
tmp = readb(info->base + S3C2410_RTCALM) & ~S3C2410_RTCALM_ALMEN;
@@ -135,10 +153,13 @@
s3c_rtc_disable_clk(info);
- if (enabled)
- s3c_rtc_enable_clk(info);
- else
+ if (enabled) {
+ ret = s3c_rtc_enable_clk(info);
+ if (ret)
+ return ret;
+ } else {
s3c_rtc_disable_clk(info);
+ }
return 0;
}
@@ -146,10 +167,14 @@
/* Set RTC frequency */
static int s3c_rtc_setfreq(struct s3c_rtc *info, int freq)
{
+ int ret;
+
if (!is_power_of_2(freq))
return -EINVAL;
- s3c_rtc_enable_clk(info);
+ ret = s3c_rtc_enable_clk(info);
+ if (ret)
+ return ret;
spin_lock_irq(&info->pie_lock);
if (info->data->set_freq)
@@ -166,10 +191,13 @@
{
struct s3c_rtc *info = dev_get_drvdata(dev);
unsigned int have_retried = 0;
+ int ret;
- s3c_rtc_enable_clk(info);
+ ret = s3c_rtc_enable_clk(info);
+ if (ret)
+ return ret;
- retry_get_time:
+retry_get_time:
rtc_tm->tm_min = readb(info->base + S3C2410_RTCMIN);
rtc_tm->tm_hour = readb(info->base + S3C2410_RTCHOUR);
rtc_tm->tm_mday = readb(info->base + S3C2410_RTCDATE);
@@ -199,8 +227,8 @@
rtc_tm->tm_year += 100;
dev_dbg(dev, "read time %04d.%02d.%02d %02d:%02d:%02d\n",
- 1900 + rtc_tm->tm_year, rtc_tm->tm_mon, rtc_tm->tm_mday,
- rtc_tm->tm_hour, rtc_tm->tm_min, rtc_tm->tm_sec);
+ 1900 + rtc_tm->tm_year, rtc_tm->tm_mon, rtc_tm->tm_mday,
+ rtc_tm->tm_hour, rtc_tm->tm_min, rtc_tm->tm_sec);
rtc_tm->tm_mon -= 1;
@@ -211,10 +239,11 @@
{
struct s3c_rtc *info = dev_get_drvdata(dev);
int year = tm->tm_year - 100;
+ int ret;
dev_dbg(dev, "set time %04d.%02d.%02d %02d:%02d:%02d\n",
- 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
- tm->tm_hour, tm->tm_min, tm->tm_sec);
+ 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
+ tm->tm_hour, tm->tm_min, tm->tm_sec);
/* we get around y2k by simply not supporting it */
@@ -223,7 +252,9 @@
return -EINVAL;
}
- s3c_rtc_enable_clk(info);
+ ret = s3c_rtc_enable_clk(info);
+ if (ret)
+ return ret;
writeb(bin2bcd(tm->tm_sec), info->base + S3C2410_RTCSEC);
writeb(bin2bcd(tm->tm_min), info->base + S3C2410_RTCMIN);
@@ -242,8 +273,11 @@
struct s3c_rtc *info = dev_get_drvdata(dev);
struct rtc_time *alm_tm = &alrm->time;
unsigned int alm_en;
+ int ret;
- s3c_rtc_enable_clk(info);
+ ret = s3c_rtc_enable_clk(info);
+ if (ret)
+ return ret;
alm_tm->tm_sec = readb(info->base + S3C2410_ALMSEC);
alm_tm->tm_min = readb(info->base + S3C2410_ALMMIN);
@@ -259,9 +293,9 @@
alrm->enabled = (alm_en & S3C2410_RTCALM_ALMEN) ? 1 : 0;
dev_dbg(dev, "read alarm %d, %04d.%02d.%02d %02d:%02d:%02d\n",
- alm_en,
- 1900 + alm_tm->tm_year, alm_tm->tm_mon, alm_tm->tm_mday,
- alm_tm->tm_hour, alm_tm->tm_min, alm_tm->tm_sec);
+ alm_en,
+ 1900 + alm_tm->tm_year, alm_tm->tm_mon, alm_tm->tm_mday,
+ alm_tm->tm_hour, alm_tm->tm_min, alm_tm->tm_sec);
/* decode the alarm enable field */
if (alm_en & S3C2410_RTCALM_SECEN)
@@ -292,14 +326,17 @@
struct s3c_rtc *info = dev_get_drvdata(dev);
struct rtc_time *tm = &alrm->time;
unsigned int alrm_en;
+ int ret;
int year = tm->tm_year - 100;
dev_dbg(dev, "s3c_rtc_setalarm: %d, %04d.%02d.%02d %02d:%02d:%02d\n",
- alrm->enabled,
- 1900 + tm->tm_year, tm->tm_mon + 1, tm->tm_mday,
- tm->tm_hour, tm->tm_min, tm->tm_sec);
+ alrm->enabled,
+ 1900 + tm->tm_year, tm->tm_mon + 1, tm->tm_mday,
+ tm->tm_hour, tm->tm_min, tm->tm_sec);
- s3c_rtc_enable_clk(info);
+ ret = s3c_rtc_enable_clk(info);
+ if (ret)
+ return ret;
alrm_en = readb(info->base + S3C2410_RTCALM) & S3C2410_RTCALM_ALMEN;
writeb(0x00, info->base + S3C2410_RTCALM);
@@ -348,8 +385,11 @@
static int s3c_rtc_proc(struct device *dev, struct seq_file *seq)
{
struct s3c_rtc *info = dev_get_drvdata(dev);
+ int ret;
- s3c_rtc_enable_clk(info);
+ ret = s3c_rtc_enable_clk(info);
+ if (ret)
+ return ret;
if (info->data->enable_tick)
info->data->enable_tick(info, seq);
@@ -378,8 +418,7 @@
dev_info(info->dev, "rtc disabled, re-enabling\n");
tmp = readw(info->base + S3C2410_RTCCON);
- writew(tmp | S3C2410_RTCCON_RTCEN,
- info->base + S3C2410_RTCCON);
+ writew(tmp | S3C2410_RTCCON_RTCEN, info->base + S3C2410_RTCCON);
}
if (con & S3C2410_RTCCON_CNTSEL) {
@@ -387,7 +426,7 @@
tmp = readw(info->base + S3C2410_RTCCON);
writew(tmp & ~S3C2410_RTCCON_CNTSEL,
- info->base + S3C2410_RTCCON);
+ info->base + S3C2410_RTCCON);
}
if (con & S3C2410_RTCCON_CLKRST) {
@@ -395,7 +434,7 @@
tmp = readw(info->base + S3C2410_RTCCON);
writew(tmp & ~S3C2410_RTCCON_CLKRST,
- info->base + S3C2410_RTCCON);
+ info->base + S3C2410_RTCCON);
}
}
@@ -437,12 +476,12 @@
static const struct of_device_id s3c_rtc_dt_match[];
-static struct s3c_rtc_data *s3c_rtc_get_data(struct platform_device *pdev)
+static const struct s3c_rtc_data *s3c_rtc_get_data(struct platform_device *pdev)
{
const struct of_device_id *match;
match = of_match_node(s3c_rtc_dt_match, pdev->dev.of_node);
- return (struct s3c_rtc_data *)match->data;
+ return match->data;
}
static int s3c_rtc_probe(struct platform_device *pdev)
@@ -481,7 +520,7 @@
}
dev_dbg(&pdev->dev, "s3c2410_rtc: tick irq %d, alarm irq %d\n",
- info->irq_tick, info->irq_alarm);
+ info->irq_tick, info->irq_alarm);
/* get the memory region */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -498,7 +537,9 @@
dev_dbg(&pdev->dev, "probe deferred due to missing rtc clk\n");
return ret;
}
- clk_prepare_enable(info->rtc_clk);
+ ret = clk_prepare_enable(info->rtc_clk);
+ if (ret)
+ return ret;
if (info->data->needs_src_clk) {
info->rtc_src_clk = devm_clk_get(&pdev->dev, "rtc_src");
@@ -510,10 +551,11 @@
else
dev_dbg(&pdev->dev,
"probe deferred due to missing rtc src clk\n");
- clk_disable_unprepare(info->rtc_clk);
- return ret;
+ goto err_src_clk;
}
- clk_prepare_enable(info->rtc_src_clk);
+ ret = clk_prepare_enable(info->rtc_src_clk);
+ if (ret)
+ goto err_src_clk;
}
/* check to see if everything is setup correctly */
@@ -521,7 +563,7 @@
info->data->enable(info);
dev_dbg(&pdev->dev, "s3c2410_rtc: RTCCON=%02x\n",
- readw(info->base + S3C2410_RTCCON));
+ readw(info->base + S3C2410_RTCCON));
device_init_wakeup(&pdev->dev, 1);
@@ -541,7 +583,7 @@
/* register RTC and exit */
info->rtc = devm_rtc_device_register(&pdev->dev, "s3c", &s3c_rtcops,
- THIS_MODULE);
+ THIS_MODULE);
if (IS_ERR(info->rtc)) {
dev_err(&pdev->dev, "cannot attach rtc\n");
ret = PTR_ERR(info->rtc);
@@ -549,14 +591,14 @@
}
ret = devm_request_irq(&pdev->dev, info->irq_alarm, s3c_rtc_alarmirq,
- 0, "s3c2410-rtc alarm", info);
+ 0, "s3c2410-rtc alarm", info);
if (ret) {
dev_err(&pdev->dev, "IRQ%d error %d\n", info->irq_alarm, ret);
goto err_nortc;
}
ret = devm_request_irq(&pdev->dev, info->irq_tick, s3c_rtc_tickirq,
- 0, "s3c2410-rtc tick", info);
+ 0, "s3c2410-rtc tick", info);
if (ret) {
dev_err(&pdev->dev, "IRQ%d error %d\n", info->irq_tick, ret);
goto err_nortc;
@@ -569,12 +611,13 @@
return 0;
- err_nortc:
+err_nortc:
if (info->data->disable)
info->data->disable(info);
if (info->data->needs_src_clk)
clk_disable_unprepare(info->rtc_src_clk);
+err_src_clk:
clk_disable_unprepare(info->rtc_clk);
return ret;
@@ -585,8 +628,11 @@
static int s3c_rtc_suspend(struct device *dev)
{
struct s3c_rtc *info = dev_get_drvdata(dev);
+ int ret;
- s3c_rtc_enable_clk(info);
+ ret = s3c_rtc_enable_clk(info);
+ if (ret)
+ return ret;
/* save TICNT for anyone using periodic interrupts */
if (info->data->save_tick_cnt)
@@ -747,8 +793,7 @@
writel(info->ticnt_save, info->base + S3C2410_TICNT);
if (info->ticnt_en_save) {
con = readw(info->base + S3C2410_RTCCON);
- writew(con | info->ticnt_en_save,
- info->base + S3C2410_RTCCON);
+ writew(con | info->ticnt_en_save, info->base + S3C2410_RTCCON);
}
}
@@ -802,19 +847,19 @@
static const struct of_device_id s3c_rtc_dt_match[] = {
{
.compatible = "samsung,s3c2410-rtc",
- .data = (void *)&s3c2410_rtc_data,
+ .data = &s3c2410_rtc_data,
}, {
.compatible = "samsung,s3c2416-rtc",
- .data = (void *)&s3c2416_rtc_data,
+ .data = &s3c2416_rtc_data,
}, {
.compatible = "samsung,s3c2443-rtc",
- .data = (void *)&s3c2443_rtc_data,
+ .data = &s3c2443_rtc_data,
}, {
.compatible = "samsung,s3c6410-rtc",
- .data = (void *)&s3c6410_rtc_data,
+ .data = &s3c6410_rtc_data,
}, {
.compatible = "samsung,exynos3250-rtc",
- .data = (void *)&s3c6410_rtc_data,
+ .data = &s3c6410_rtc_data,
},
{ /* sentinel */ },
};
diff --git a/drivers/rtc/rtc-st-lpc.c b/drivers/rtc/rtc-st-lpc.c
index 74c0a33..82b0af1 100644
--- a/drivers/rtc/rtc-st-lpc.c
+++ b/drivers/rtc/rtc-st-lpc.c
@@ -99,7 +99,7 @@
lpt = ((unsigned long long)lpt_msb << 32) | lpt_lsb;
do_div(lpt, rtc->clkrate);
- rtc_time_to_tm(lpt, tm);
+ rtc_time64_to_tm(lpt, tm);
return 0;
}
@@ -107,13 +107,10 @@
static int st_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
struct st_rtc *rtc = dev_get_drvdata(dev);
- unsigned long long lpt;
- unsigned long secs, flags;
- int ret;
+ unsigned long long lpt, secs;
+ unsigned long flags;
- ret = rtc_tm_to_time(tm, &secs);
- if (ret)
- return ret;
+ secs = rtc_tm_to_time64(tm);
lpt = (unsigned long long)secs * rtc->clkrate;
@@ -161,13 +158,13 @@
{
struct st_rtc *rtc = dev_get_drvdata(dev);
struct rtc_time now;
- unsigned long now_secs;
- unsigned long alarm_secs;
+ unsigned long long now_secs;
+ unsigned long long alarm_secs;
unsigned long long lpa;
st_rtc_read_time(dev, &now);
- rtc_tm_to_time(&now, &now_secs);
- rtc_tm_to_time(&t->time, &alarm_secs);
+ now_secs = rtc_tm_to_time64(&now);
+ alarm_secs = rtc_tm_to_time64(&t->time);
/* Invalid alarm time */
if (now_secs > alarm_secs)
diff --git a/drivers/rtc/rtc-stm32.c b/drivers/rtc/rtc-stm32.c
index bd57eb1..3a5c3d7 100644
--- a/drivers/rtc/rtc-stm32.c
+++ b/drivers/rtc/rtc-stm32.c
@@ -94,11 +94,17 @@
/* STM32_PWR_CR bit field */
#define PWR_CR_DBP BIT(8)
+struct stm32_rtc_data {
+ bool has_pclk;
+};
+
struct stm32_rtc {
struct rtc_device *rtc_dev;
void __iomem *base;
struct regmap *dbp;
- struct clk *ck_rtc;
+ struct stm32_rtc_data *data;
+ struct clk *pclk;
+ struct clk *rtc_ck;
int irq_alarm;
};
@@ -122,9 +128,9 @@
writel_relaxed(isr, rtc->base + STM32_RTC_ISR);
/*
- * It takes around 2 ck_rtc clock cycles to enter in
+ * It takes around 2 rtc_ck clock cycles to enter in
* initialization phase mode (and have INITF flag set). As
- * slowest ck_rtc frequency may be 32kHz and highest should be
+ * slowest rtc_ck frequency may be 32kHz and highest should be
* 1MHz, we poll every 10 us with a timeout of 100ms.
*/
return readl_relaxed_poll_timeout_atomic(
@@ -153,7 +159,7 @@
/*
* Wait for RSF to be set to ensure the calendar registers are
- * synchronised, it takes around 2 ck_rtc clock cycles
+ * synchronised, it takes around 2 rtc_ck clock cycles
*/
return readl_relaxed_poll_timeout_atomic(rtc->base + STM32_RTC_ISR,
isr,
@@ -456,7 +462,7 @@
/*
* Poll Alarm write flag to be sure that Alarm update is allowed: it
- * takes around 2 ck_rtc clock cycles
+ * takes around 2 rtc_ck clock cycles
*/
ret = readl_relaxed_poll_timeout_atomic(rtc->base + STM32_RTC_ISR,
isr,
@@ -490,8 +496,17 @@
.alarm_irq_enable = stm32_rtc_alarm_irq_enable,
};
+static const struct stm32_rtc_data stm32_rtc_data = {
+ .has_pclk = false,
+};
+
+static const struct stm32_rtc_data stm32h7_rtc_data = {
+ .has_pclk = true,
+};
+
static const struct of_device_id stm32_rtc_of_match[] = {
- { .compatible = "st,stm32-rtc" },
+ { .compatible = "st,stm32-rtc", .data = &stm32_rtc_data },
+ { .compatible = "st,stm32h7-rtc", .data = &stm32h7_rtc_data },
{}
};
MODULE_DEVICE_TABLE(of, stm32_rtc_of_match);
@@ -503,7 +518,7 @@
unsigned int rate;
int ret = 0;
- rate = clk_get_rate(rtc->ck_rtc);
+ rate = clk_get_rate(rtc->rtc_ck);
/* Find prediv_a and prediv_s to obtain the 1Hz calendar clock */
pred_a_max = STM32_RTC_PRER_PRED_A >> STM32_RTC_PRER_PRED_A_SHIFT;
@@ -524,7 +539,7 @@
pred_a = pred_a_max;
pred_s = (rate / (pred_a + 1)) - 1;
- dev_warn(&pdev->dev, "ck_rtc is %s\n",
+ dev_warn(&pdev->dev, "rtc_ck is %s\n",
(rate < ((pred_a + 1) * (pred_s + 1))) ?
"fast" : "slow");
}
@@ -561,6 +576,7 @@
{
struct stm32_rtc *rtc;
struct resource *res;
+ const struct of_device_id *match;
int ret;
rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
@@ -579,15 +595,34 @@
return PTR_ERR(rtc->dbp);
}
- rtc->ck_rtc = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(rtc->ck_rtc)) {
- dev_err(&pdev->dev, "no ck_rtc clock");
- return PTR_ERR(rtc->ck_rtc);
+ match = of_match_device(stm32_rtc_of_match, &pdev->dev);
+ rtc->data = (struct stm32_rtc_data *)match->data;
+
+ if (!rtc->data->has_pclk) {
+ rtc->pclk = NULL;
+ rtc->rtc_ck = devm_clk_get(&pdev->dev, NULL);
+ } else {
+ rtc->pclk = devm_clk_get(&pdev->dev, "pclk");
+ if (IS_ERR(rtc->pclk)) {
+ dev_err(&pdev->dev, "no pclk clock");
+ return PTR_ERR(rtc->pclk);
+ }
+ rtc->rtc_ck = devm_clk_get(&pdev->dev, "rtc_ck");
+ }
+ if (IS_ERR(rtc->rtc_ck)) {
+ dev_err(&pdev->dev, "no rtc_ck clock");
+ return PTR_ERR(rtc->rtc_ck);
}
- ret = clk_prepare_enable(rtc->ck_rtc);
+ if (rtc->data->has_pclk) {
+ ret = clk_prepare_enable(rtc->pclk);
+ if (ret)
+ return ret;
+ }
+
+ ret = clk_prepare_enable(rtc->rtc_ck);
if (ret)
- return ret;
+ goto err;
regmap_update_bits(rtc->dbp, PWR_CR, PWR_CR_DBP, PWR_CR_DBP);
@@ -595,7 +630,7 @@
* After a system reset, RTC_ISR.INITS flag can be read to check if
* the calendar has been initalized or not. INITS flag is reset by a
* power-on reset (no vbat, no power-supply). It is not reset if
- * ck_rtc parent clock has changed (so RTC prescalers need to be
+ * rtc_ck parent clock has changed (so RTC prescalers need to be
* changed). That's why we cannot rely on this flag to know if RTC
* init has to be done.
*/
@@ -646,7 +681,9 @@
return 0;
err:
- clk_disable_unprepare(rtc->ck_rtc);
+ if (rtc->data->has_pclk)
+ clk_disable_unprepare(rtc->pclk);
+ clk_disable_unprepare(rtc->rtc_ck);
regmap_update_bits(rtc->dbp, PWR_CR, PWR_CR_DBP, 0);
@@ -667,7 +704,9 @@
writel_relaxed(cr, rtc->base + STM32_RTC_CR);
stm32_rtc_wpr_lock(rtc);
- clk_disable_unprepare(rtc->ck_rtc);
+ clk_disable_unprepare(rtc->rtc_ck);
+ if (rtc->data->has_pclk)
+ clk_disable_unprepare(rtc->pclk);
/* Enable backup domain write protection */
regmap_update_bits(rtc->dbp, PWR_CR, PWR_CR_DBP, 0);
@@ -682,6 +721,9 @@
{
struct stm32_rtc *rtc = dev_get_drvdata(dev);
+ if (rtc->data->has_pclk)
+ clk_disable_unprepare(rtc->pclk);
+
if (device_may_wakeup(dev))
return enable_irq_wake(rtc->irq_alarm);
@@ -693,6 +735,12 @@
struct stm32_rtc *rtc = dev_get_drvdata(dev);
int ret = 0;
+ if (rtc->data->has_pclk) {
+ ret = clk_prepare_enable(rtc->pclk);
+ if (ret)
+ return ret;
+ }
+
ret = stm32_rtc_wait_sync(rtc);
if (ret < 0)
return ret;
diff --git a/drivers/rtc/rtc-sysfs.c b/drivers/rtc/rtc-sysfs.c
index 1218d5d..e364550 100644
--- a/drivers/rtc/rtc-sysfs.c
+++ b/drivers/rtc/rtc-sysfs.c
@@ -27,7 +27,8 @@
static ssize_t
name_show(struct device *dev, struct device_attribute *attr, char *buf)
{
- return sprintf(buf, "%s\n", to_rtc_device(dev)->name);
+ return sprintf(buf, "%s %s\n", dev_driver_string(dev->parent),
+ dev_name(dev->parent));
}
static DEVICE_ATTR_RO(name);
diff --git a/drivers/s390/char/vmcp.c b/drivers/s390/char/vmcp.c
index 65f5a79..98749fa 100644
--- a/drivers/s390/char/vmcp.c
+++ b/drivers/s390/char/vmcp.c
@@ -98,7 +98,7 @@
}
if (!session->response)
session->response = (char *)__get_free_pages(GFP_KERNEL
- | __GFP_REPEAT | GFP_DMA,
+ | __GFP_RETRY_MAYFAIL | GFP_DMA,
get_order(session->bufsize));
if (!session->response) {
mutex_unlock(&session->mutex);
diff --git a/drivers/s390/cio/chp.c b/drivers/s390/cio/chp.c
index 7e0d4f7..432fc40 100644
--- a/drivers/s390/cio/chp.c
+++ b/drivers/s390/cio/chp.c
@@ -559,6 +559,7 @@
chpid.id = crw0->rsid;
switch (crw0->erc) {
case CRW_ERC_IPARM: /* Path has come. */
+ case CRW_ERC_INIT:
if (!chp_is_registered(chpid))
chp_new(chpid);
chsc_chp_online(chpid);
diff --git a/drivers/s390/net/ctcm_main.c b/drivers/s390/net/ctcm_main.c
index 1563b14..2ade613 100644
--- a/drivers/s390/net/ctcm_main.c
+++ b/drivers/s390/net/ctcm_main.c
@@ -1115,7 +1115,7 @@
.ndo_start_xmit = ctcmpc_tx,
};
-void static ctcm_dev_setup(struct net_device *dev)
+static void ctcm_dev_setup(struct net_device *dev)
{
dev->type = ARPHRD_SLIP;
dev->tx_queue_len = 100;
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index 3062cde..8975cd3 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -2408,7 +2408,7 @@
return rc;
}
-int inline qeth_l3_get_cast_type(struct qeth_card *card, struct sk_buff *skb)
+inline int qeth_l3_get_cast_type(struct qeth_card *card, struct sk_buff *skb)
{
int cast_type = RTN_UNSPEC;
struct neighbour *n = NULL;
diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c
index bcc8f3d..82ac331 100644
--- a/drivers/s390/scsi/zfcp_aux.c
+++ b/drivers/s390/scsi/zfcp_aux.c
@@ -29,7 +29,6 @@
#define KMSG_COMPONENT "zfcp"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
-#include <linux/miscdevice.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/module.h>
diff --git a/drivers/s390/scsi/zfcp_dbf.c b/drivers/s390/scsi/zfcp_dbf.c
index d5bf36e..8227076 100644
--- a/drivers/s390/scsi/zfcp_dbf.c
+++ b/drivers/s390/scsi/zfcp_dbf.c
@@ -3,7 +3,7 @@
*
* Debug traces for zfcp.
*
- * Copyright IBM Corp. 2002, 2016
+ * Copyright IBM Corp. 2002, 2017
*/
#define KMSG_COMPONENT "zfcp"
@@ -113,8 +113,12 @@
struct zfcp_dbf *dbf = req->adapter->dbf;
struct fsf_status_read_buffer *srb = req->data;
struct zfcp_dbf_hba *rec = &dbf->hba_buf;
+ static int const level = 2;
unsigned long flags;
+ if (unlikely(!debug_level_enabled(dbf->hba, level)))
+ return;
+
spin_lock_irqsave(&dbf->hba_lock, flags);
memset(rec, 0, sizeof(*rec));
@@ -142,7 +146,7 @@
zfcp_dbf_pl_write(dbf, srb->payload.data, rec->pl_len,
"fsf_uss", req->req_id);
log:
- debug_event(dbf->hba, 2, rec, sizeof(*rec));
+ debug_event(dbf->hba, level, rec, sizeof(*rec));
spin_unlock_irqrestore(&dbf->hba_lock, flags);
}
@@ -156,8 +160,12 @@
struct zfcp_dbf *dbf = req->adapter->dbf;
struct zfcp_dbf_hba *rec = &dbf->hba_buf;
struct fsf_status_read_buffer *sr_buf = req->data;
+ static int const level = 1;
unsigned long flags;
+ if (unlikely(!debug_level_enabled(dbf->hba, level)))
+ return;
+
spin_lock_irqsave(&dbf->hba_lock, flags);
memset(rec, 0, sizeof(*rec));
@@ -169,7 +177,7 @@
memcpy(&rec->u.be, &sr_buf->payload.bit_error,
sizeof(struct fsf_bit_error_payload));
- debug_event(dbf->hba, 1, rec, sizeof(*rec));
+ debug_event(dbf->hba, level, rec, sizeof(*rec));
spin_unlock_irqrestore(&dbf->hba_lock, flags);
}
@@ -186,8 +194,12 @@
struct zfcp_dbf *dbf = adapter->dbf;
struct zfcp_dbf_pay *payload = &dbf->pay_buf;
unsigned long flags;
+ static int const level = 1;
u16 length;
+ if (unlikely(!debug_level_enabled(dbf->pay, level)))
+ return;
+
if (!pl)
return;
@@ -202,7 +214,7 @@
while (payload->counter < scount && (char *)pl[payload->counter]) {
memcpy(payload->data, (char *)pl[payload->counter], length);
- debug_event(dbf->pay, 1, payload, zfcp_dbf_plen(length));
+ debug_event(dbf->pay, level, payload, zfcp_dbf_plen(length));
payload->counter++;
}
@@ -217,15 +229,19 @@
{
struct zfcp_dbf *dbf = adapter->dbf;
struct zfcp_dbf_hba *rec = &dbf->hba_buf;
+ static int const level = 1;
unsigned long flags;
+ if (unlikely(!debug_level_enabled(dbf->hba, level)))
+ return;
+
spin_lock_irqsave(&dbf->hba_lock, flags);
memset(rec, 0, sizeof(*rec));
memcpy(rec->tag, tag, ZFCP_DBF_TAG_LEN);
rec->id = ZFCP_DBF_HBA_BASIC;
- debug_event(dbf->hba, 1, rec, sizeof(*rec));
+ debug_event(dbf->hba, level, rec, sizeof(*rec));
spin_unlock_irqrestore(&dbf->hba_lock, flags);
}
@@ -264,9 +280,13 @@
{
struct zfcp_dbf *dbf = adapter->dbf;
struct zfcp_dbf_rec *rec = &dbf->rec_buf;
+ static int const level = 1;
struct list_head *entry;
unsigned long flags;
+ if (unlikely(!debug_level_enabled(dbf->rec, level)))
+ return;
+
spin_lock_irqsave(&dbf->rec_lock, flags);
memset(rec, 0, sizeof(*rec));
@@ -283,7 +303,7 @@
rec->u.trig.want = want;
rec->u.trig.need = need;
- debug_event(dbf->rec, 1, rec, sizeof(*rec));
+ debug_event(dbf->rec, level, rec, sizeof(*rec));
spin_unlock_irqrestore(&dbf->rec_lock, flags);
}
@@ -300,6 +320,9 @@
struct zfcp_dbf_rec *rec = &dbf->rec_buf;
unsigned long flags;
+ if (!debug_level_enabled(dbf->rec, level))
+ return;
+
spin_lock_irqsave(&dbf->rec_lock, flags);
memset(rec, 0, sizeof(*rec));
@@ -345,8 +368,12 @@
{
struct zfcp_dbf *dbf = wka_port->adapter->dbf;
struct zfcp_dbf_rec *rec = &dbf->rec_buf;
+ static int const level = 1;
unsigned long flags;
+ if (unlikely(!debug_level_enabled(dbf->rec, level)))
+ return;
+
spin_lock_irqsave(&dbf->rec_lock, flags);
memset(rec, 0, sizeof(*rec));
@@ -362,10 +389,12 @@
rec->u.run.rec_action = ~0;
rec->u.run.rec_count = ~0;
- debug_event(dbf->rec, 1, rec, sizeof(*rec));
+ debug_event(dbf->rec, level, rec, sizeof(*rec));
spin_unlock_irqrestore(&dbf->rec_lock, flags);
}
+#define ZFCP_DBF_SAN_LEVEL 1
+
static inline
void zfcp_dbf_san(char *tag, struct zfcp_dbf *dbf,
char *paytag, struct scatterlist *sg, u8 id, u16 len,
@@ -408,7 +437,7 @@
(u16)(sg->length - offset));
/* cap_len <= pay_sum < cap_len+ZFCP_DBF_PAY_MAX_REC */
memcpy(payload->data, sg_virt(sg) + offset, pay_len);
- debug_event(dbf->pay, 1, payload,
+ debug_event(dbf->pay, ZFCP_DBF_SAN_LEVEL, payload,
zfcp_dbf_plen(pay_len));
payload->counter++;
offset += pay_len;
@@ -418,7 +447,7 @@
spin_unlock(&dbf->pay_lock);
out:
- debug_event(dbf->san, 1, rec, sizeof(*rec));
+ debug_event(dbf->san, ZFCP_DBF_SAN_LEVEL, rec, sizeof(*rec));
spin_unlock_irqrestore(&dbf->san_lock, flags);
}
@@ -434,6 +463,9 @@
struct zfcp_fsf_ct_els *ct_els = fsf->data;
u16 length;
+ if (unlikely(!debug_level_enabled(dbf->san, ZFCP_DBF_SAN_LEVEL)))
+ return;
+
length = (u16)zfcp_qdio_real_bytes(ct_els->req);
zfcp_dbf_san(tag, dbf, "san_req", ct_els->req, ZFCP_DBF_SAN_REQ,
length, fsf->req_id, d_id, length);
@@ -447,6 +479,7 @@
struct fc_ct_hdr *reqh = sg_virt(ct_els->req);
struct fc_ns_gid_ft *reqn = (struct fc_ns_gid_ft *)(reqh + 1);
struct scatterlist *resp_entry = ct_els->resp;
+ struct fc_ct_hdr *resph;
struct fc_gpn_ft_resp *acc;
int max_entries, x, last = 0;
@@ -460,7 +493,7 @@
&& reqh->ct_fs_subtype == FC_NS_SUBTYPE
&& reqh->ct_options == 0
&& reqh->_ct_resvd1 == 0
- && reqh->ct_cmd == FC_NS_GPN_FT
+ && reqh->ct_cmd == cpu_to_be16(FC_NS_GPN_FT)
/* reqh->ct_mr_size can vary so do not match but read below */
&& reqh->_ct_resvd2 == 0
&& reqh->ct_reason == 0
@@ -473,7 +506,15 @@
return len; /* not GPN_FT response so do not cap */
acc = sg_virt(resp_entry);
- max_entries = (reqh->ct_mr_size * 4 / sizeof(struct fc_gpn_ft_resp))
+
+ /* cap all but accept CT responses to at least the CT header */
+ resph = (struct fc_ct_hdr *)acc;
+ if ((ct_els->status) ||
+ (resph->ct_cmd != cpu_to_be16(FC_FS_ACC)))
+ return max(FC_CT_HDR_LEN, ZFCP_DBF_SAN_MAX_PAYLOAD);
+
+ max_entries = (be16_to_cpu(reqh->ct_mr_size) * 4 /
+ sizeof(struct fc_gpn_ft_resp))
+ 1 /* zfcp_fc_scan_ports: bytes correct, entries off-by-one
* to account for header as 1st pseudo "entry" */;
@@ -503,6 +544,9 @@
struct zfcp_fsf_ct_els *ct_els = fsf->data;
u16 length;
+ if (unlikely(!debug_level_enabled(dbf->san, ZFCP_DBF_SAN_LEVEL)))
+ return;
+
length = (u16)zfcp_qdio_real_bytes(ct_els->resp);
zfcp_dbf_san(tag, dbf, "san_res", ct_els->resp, ZFCP_DBF_SAN_RES,
length, fsf->req_id, ct_els->d_id,
@@ -522,6 +566,9 @@
u16 length;
struct scatterlist sg;
+ if (unlikely(!debug_level_enabled(dbf->san, ZFCP_DBF_SAN_LEVEL)))
+ return;
+
length = (u16)(srb->length -
offsetof(struct fsf_status_read_buffer, payload));
sg_init_one(&sg, srb->payload.data, length);
@@ -555,8 +602,8 @@
rec->scsi_retries = sc->retries;
rec->scsi_allowed = sc->allowed;
rec->scsi_id = sc->device->id;
- /* struct zfcp_dbf_scsi needs to be updated to handle 64bit LUNs */
rec->scsi_lun = (u32)sc->device->lun;
+ rec->scsi_lun_64_hi = (u32)(sc->device->lun >> 32);
rec->host_scribble = (unsigned long)sc->host_scribble;
memcpy(rec->scsi_opcode, sc->cmnd,
@@ -564,19 +611,31 @@
if (fsf) {
rec->fsf_req_id = fsf->req_id;
- fcp_rsp = (struct fcp_resp_with_ext *)
- &(fsf->qtcb->bottom.io.fcp_rsp);
+ rec->pl_len = FCP_RESP_WITH_EXT;
+ fcp_rsp = &(fsf->qtcb->bottom.io.fcp_rsp.iu);
+ /* mandatory parts of FCP_RSP IU in this SCSI record */
memcpy(&rec->fcp_rsp, fcp_rsp, FCP_RESP_WITH_EXT);
if (fcp_rsp->resp.fr_flags & FCP_RSP_LEN_VAL) {
fcp_rsp_info = (struct fcp_resp_rsp_info *) &fcp_rsp[1];
rec->fcp_rsp_info = fcp_rsp_info->rsp_code;
+ rec->pl_len += be32_to_cpu(fcp_rsp->ext.fr_rsp_len);
}
if (fcp_rsp->resp.fr_flags & FCP_SNS_LEN_VAL) {
- rec->pl_len = min((u16)SCSI_SENSE_BUFFERSIZE,
- (u16)ZFCP_DBF_PAY_MAX_REC);
- zfcp_dbf_pl_write(dbf, sc->sense_buffer, rec->pl_len,
- "fcp_sns", fsf->req_id);
+ rec->pl_len += be32_to_cpu(fcp_rsp->ext.fr_sns_len);
}
+ /* complete FCP_RSP IU in associated PAYload record
+ * but only if there are optional parts
+ */
+ if (fcp_rsp->resp.fr_flags != 0)
+ zfcp_dbf_pl_write(
+ dbf, fcp_rsp,
+ /* at least one full PAY record
+ * but not beyond hardware response field
+ */
+ min_t(u16, max_t(u16, rec->pl_len,
+ ZFCP_DBF_PAY_MAX_REC),
+ FSF_FCP_RSP_SIZE),
+ "fcp_riu", fsf->req_id);
}
debug_event(dbf->scsi, level, rec, sizeof(*rec));
diff --git a/drivers/s390/scsi/zfcp_dbf.h b/drivers/s390/scsi/zfcp_dbf.h
index db186d4..3508c00 100644
--- a/drivers/s390/scsi/zfcp_dbf.h
+++ b/drivers/s390/scsi/zfcp_dbf.h
@@ -2,7 +2,7 @@
* zfcp device driver
* debug feature declarations
*
- * Copyright IBM Corp. 2008, 2016
+ * Copyright IBM Corp. 2008, 2017
*/
#ifndef ZFCP_DBF_H
@@ -204,16 +204,17 @@
* @id: unique number of recovery record type
* @tag: identifier string specifying the location of initiation
* @scsi_id: scsi device id
- * @scsi_lun: scsi device logical unit number
+ * @scsi_lun: scsi device logical unit number, low part of 64 bit, old 32 bit
* @scsi_result: scsi result
* @scsi_retries: current retry number of scsi request
* @scsi_allowed: allowed retries
- * @fcp_rsp_info: FCP response info
+ * @fcp_rsp_info: FCP response info code
* @scsi_opcode: scsi opcode
* @fsf_req_id: request id of fsf request
* @host_scribble: LLD specific data attached to SCSI request
- * @pl_len: length of paload stored as zfcp_dbf_pay
- * @fsf_rsp: response for fsf request
+ * @pl_len: length of payload stored as zfcp_dbf_pay
+ * @fcp_rsp: response for FCP request
+ * @scsi_lun_64_hi: scsi device logical unit number, high part of 64 bit
*/
struct zfcp_dbf_scsi {
u8 id;
@@ -230,6 +231,7 @@
u64 host_scribble;
u16 pl_len;
struct fcp_resp_with_ext fcp_rsp;
+ u32 scsi_lun_64_hi;
} __packed;
/**
@@ -299,7 +301,7 @@
if (qtcb->prefix.qtcb_type != FSF_IO_COMMAND)
return false; /* not an FCP response */
- fcp_rsp = (struct fcp_resp *)&qtcb->bottom.io.fcp_rsp;
+ fcp_rsp = &qtcb->bottom.io.fcp_rsp.iu.resp;
rsp_flags = fcp_rsp->fr_flags;
fr_status = fcp_rsp->fr_status;
return (fsf_stat == FSF_FCP_RSP_AVAILABLE) &&
@@ -323,7 +325,11 @@
{
struct fsf_qtcb *qtcb = req->qtcb;
- if ((qtcb->prefix.prot_status != FSF_PROT_GOOD) &&
+ if (unlikely(req->status & (ZFCP_STATUS_FSFREQ_DISMISSED |
+ ZFCP_STATUS_FSFREQ_ERROR))) {
+ zfcp_dbf_hba_fsf_resp("fs_rerr", 3, req);
+
+ } else if ((qtcb->prefix.prot_status != FSF_PROT_GOOD) &&
(qtcb->prefix.prot_status != FSF_PROT_FSF_STATUS_PRESENTED)) {
zfcp_dbf_hba_fsf_resp("fs_perr", 1, req);
@@ -401,7 +407,8 @@
* @flag: indicates type of reset (Target Reset, Logical Unit Reset)
*/
static inline
-void zfcp_dbf_scsi_devreset(char *tag, struct scsi_cmnd *scmnd, u8 flag)
+void zfcp_dbf_scsi_devreset(char *tag, struct scsi_cmnd *scmnd, u8 flag,
+ struct zfcp_fsf_req *fsf_req)
{
char tmp_tag[ZFCP_DBF_TAG_LEN];
@@ -411,7 +418,7 @@
memcpy(tmp_tag, "lr_", 3);
memcpy(&tmp_tag[3], tag, 4);
- _zfcp_dbf_scsi(tmp_tag, 1, scmnd, NULL);
+ _zfcp_dbf_scsi(tmp_tag, 1, scmnd, fsf_req);
}
/**
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c
index 7ccfce5..37408f5 100644
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -572,9 +572,8 @@
static void zfcp_erp_strategy_memwait(struct zfcp_erp_action *erp_action)
{
- init_timer(&erp_action->timer);
- erp_action->timer.function = zfcp_erp_memwait_handler;
- erp_action->timer.data = (unsigned long) erp_action;
+ setup_timer(&erp_action->timer, zfcp_erp_memwait_handler,
+ (unsigned long) erp_action);
erp_action->timer.expires = jiffies + HZ;
add_timer(&erp_action->timer);
}
diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h
index 9afdbc3..a9e9687 100644
--- a/drivers/s390/scsi/zfcp_ext.h
+++ b/drivers/s390/scsi/zfcp_ext.h
@@ -41,7 +41,6 @@
extern void zfcp_dbf_hba_fsf_uss(char *, struct zfcp_fsf_req *);
extern void zfcp_dbf_hba_fsf_res(char *, int, struct zfcp_fsf_req *);
extern void zfcp_dbf_hba_bit_err(char *, struct zfcp_fsf_req *);
-extern void zfcp_dbf_hba_berr(struct zfcp_dbf *, struct zfcp_fsf_req *);
extern void zfcp_dbf_hba_def_err(struct zfcp_adapter *, u64, u16, void **);
extern void zfcp_dbf_hba_basic(char *, struct zfcp_adapter *);
extern void zfcp_dbf_san_req(char *, struct zfcp_fsf_req *, u32);
diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c
index 7331eea..8210645 100644
--- a/drivers/s390/scsi/zfcp_fc.c
+++ b/drivers/s390/scsi/zfcp_fc.c
@@ -3,7 +3,7 @@
*
* Fibre Channel related functions for the zfcp device driver.
*
- * Copyright IBM Corp. 2008, 2010
+ * Copyright IBM Corp. 2008, 2017
*/
#define KMSG_COMPONENT "zfcp"
@@ -29,7 +29,7 @@
};
static bool no_auto_port_rescan;
-module_param_named(no_auto_port_rescan, no_auto_port_rescan, bool, 0600);
+module_param(no_auto_port_rescan, bool, 0600);
MODULE_PARM_DESC(no_auto_port_rescan,
"no automatic port_rescan (default off)");
@@ -260,7 +260,8 @@
page = (struct fc_els_rscn_page *) head;
/* see FC-FS */
- no_entries = head->rscn_plen / sizeof(struct fc_els_rscn_page);
+ no_entries = be16_to_cpu(head->rscn_plen) /
+ sizeof(struct fc_els_rscn_page);
for (i = 1; i < no_entries; i++) {
/* skip head and start with 1st element */
@@ -296,7 +297,7 @@
status_buffer = (struct fsf_status_read_buffer *) req->data;
plogi = (struct fc_els_flogi *) status_buffer->payload.data;
- zfcp_fc_incoming_wwpn(req, plogi->fl_wwpn);
+ zfcp_fc_incoming_wwpn(req, be64_to_cpu(plogi->fl_wwpn));
}
static void zfcp_fc_incoming_logo(struct zfcp_fsf_req *req)
@@ -306,7 +307,7 @@
struct fc_els_logo *logo =
(struct fc_els_logo *) status_buffer->payload.data;
- zfcp_fc_incoming_wwpn(req, logo->fl_n_port_wwn);
+ zfcp_fc_incoming_wwpn(req, be64_to_cpu(logo->fl_n_port_wwn));
}
/**
@@ -335,7 +336,7 @@
if (ct_els->status)
return;
- if (gid_pn_rsp->ct_hdr.ct_cmd != FC_FS_ACC)
+ if (gid_pn_rsp->ct_hdr.ct_cmd != cpu_to_be16(FC_FS_ACC))
return;
/* looks like a valid d_id */
@@ -352,8 +353,8 @@
ct_hdr->ct_rev = FC_CT_REV;
ct_hdr->ct_fs_type = FC_FST_DIR;
ct_hdr->ct_fs_subtype = FC_NS_SUBTYPE;
- ct_hdr->ct_cmd = cmd;
- ct_hdr->ct_mr_size = mr_size / 4;
+ ct_hdr->ct_cmd = cpu_to_be16(cmd);
+ ct_hdr->ct_mr_size = cpu_to_be16(mr_size / 4);
}
static int zfcp_fc_ns_gid_pn_request(struct zfcp_port *port,
@@ -376,7 +377,7 @@
zfcp_fc_ct_ns_init(&gid_pn_req->ct_hdr,
FC_NS_GID_PN, ZFCP_FC_CT_SIZE_PAGE);
- gid_pn_req->gid_pn.fn_wwpn = port->wwpn;
+ gid_pn_req->gid_pn.fn_wwpn = cpu_to_be64(port->wwpn);
ret = zfcp_fsf_send_ct(&adapter->gs->ds, &fc_req->ct_els,
adapter->pool.gid_pn_req,
@@ -460,26 +461,26 @@
*/
void zfcp_fc_plogi_evaluate(struct zfcp_port *port, struct fc_els_flogi *plogi)
{
- if (plogi->fl_wwpn != port->wwpn) {
+ if (be64_to_cpu(plogi->fl_wwpn) != port->wwpn) {
port->d_id = 0;
dev_warn(&port->adapter->ccw_device->dev,
"A port opened with WWPN 0x%016Lx returned data that "
"identifies it as WWPN 0x%016Lx\n",
(unsigned long long) port->wwpn,
- (unsigned long long) plogi->fl_wwpn);
+ (unsigned long long) be64_to_cpu(plogi->fl_wwpn));
return;
}
- port->wwnn = plogi->fl_wwnn;
- port->maxframe_size = plogi->fl_csp.sp_bb_data;
+ port->wwnn = be64_to_cpu(plogi->fl_wwnn);
+ port->maxframe_size = be16_to_cpu(plogi->fl_csp.sp_bb_data);
- if (plogi->fl_cssp[0].cp_class & FC_CPC_VALID)
+ if (plogi->fl_cssp[0].cp_class & cpu_to_be16(FC_CPC_VALID))
port->supported_classes |= FC_COS_CLASS1;
- if (plogi->fl_cssp[1].cp_class & FC_CPC_VALID)
+ if (plogi->fl_cssp[1].cp_class & cpu_to_be16(FC_CPC_VALID))
port->supported_classes |= FC_COS_CLASS2;
- if (plogi->fl_cssp[2].cp_class & FC_CPC_VALID)
+ if (plogi->fl_cssp[2].cp_class & cpu_to_be16(FC_CPC_VALID))
port->supported_classes |= FC_COS_CLASS3;
- if (plogi->fl_cssp[3].cp_class & FC_CPC_VALID)
+ if (plogi->fl_cssp[3].cp_class & cpu_to_be16(FC_CPC_VALID))
port->supported_classes |= FC_COS_CLASS4;
}
@@ -497,9 +498,9 @@
}
if (!port->wwnn)
- port->wwnn = adisc_resp->adisc_wwnn;
+ port->wwnn = be64_to_cpu(adisc_resp->adisc_wwnn);
- if ((port->wwpn != adisc_resp->adisc_wwpn) ||
+ if ((port->wwpn != be64_to_cpu(adisc_resp->adisc_wwpn)) ||
!(atomic_read(&port->status) & ZFCP_STATUS_COMMON_OPEN)) {
zfcp_erp_port_reopen(port, ZFCP_STATUS_COMMON_ERP_FAILED,
"fcadh_2");
@@ -538,8 +539,8 @@
/* acc. to FC-FS, hard_nport_id in ADISC should not be set for ports
without FC-AL-2 capability, so we don't set it */
- fc_req->u.adisc.req.adisc_wwpn = fc_host_port_name(shost);
- fc_req->u.adisc.req.adisc_wwnn = fc_host_node_name(shost);
+ fc_req->u.adisc.req.adisc_wwpn = cpu_to_be64(fc_host_port_name(shost));
+ fc_req->u.adisc.req.adisc_wwnn = cpu_to_be64(fc_host_node_name(shost));
fc_req->u.adisc.req.adisc_cmd = ELS_ADISC;
hton24(fc_req->u.adisc.req.adisc_port_id, fc_host_port_id(shost));
@@ -666,8 +667,8 @@
if (ct_els->status)
return -EIO;
- if (hdr->ct_cmd != FC_FS_ACC) {
- if (hdr->ct_reason == FC_BA_RJT_UNABLE)
+ if (hdr->ct_cmd != cpu_to_be16(FC_FS_ACC)) {
+ if (hdr->ct_reason == FC_FS_RJT_UNABL)
return -EAGAIN; /* might be a temporary condition */
return -EIO;
}
@@ -693,10 +694,11 @@
if (d_id >= FC_FID_WELL_KNOWN_BASE)
continue;
/* skip the adapter's port and known remote ports */
- if (acc->fp_wwpn == fc_host_port_name(adapter->scsi_host))
+ if (be64_to_cpu(acc->fp_wwpn) ==
+ fc_host_port_name(adapter->scsi_host))
continue;
- port = zfcp_port_enqueue(adapter, acc->fp_wwpn,
+ port = zfcp_port_enqueue(adapter, be64_to_cpu(acc->fp_wwpn),
ZFCP_STATUS_COMMON_NOESC, d_id);
if (!IS_ERR(port))
zfcp_erp_port_reopen(port, 0, "fcegpf1");
diff --git a/drivers/s390/scsi/zfcp_fc.h b/drivers/s390/scsi/zfcp_fc.h
index df2b541..41f22d3 100644
--- a/drivers/s390/scsi/zfcp_fc.h
+++ b/drivers/s390/scsi/zfcp_fc.h
@@ -4,7 +4,7 @@
* Fibre Channel related definitions and inline functions for the zfcp
* device driver
*
- * Copyright IBM Corp. 2009
+ * Copyright IBM Corp. 2009, 2017
*/
#ifndef ZFCP_FC_H
@@ -212,6 +212,8 @@
void zfcp_fc_scsi_to_fcp(struct fcp_cmnd *fcp, struct scsi_cmnd *scsi,
u8 tm_flags)
{
+ u32 datalen;
+
int_to_scsilun(scsi->device->lun, (struct scsi_lun *) &fcp->fc_lun);
if (unlikely(tm_flags)) {
@@ -228,10 +230,13 @@
memcpy(fcp->fc_cdb, scsi->cmnd, scsi->cmd_len);
- fcp->fc_dl = scsi_bufflen(scsi);
+ datalen = scsi_bufflen(scsi);
+ fcp->fc_dl = cpu_to_be32(datalen);
- if (scsi_get_prot_type(scsi) == SCSI_PROT_DIF_TYPE1)
- fcp->fc_dl += fcp->fc_dl / scsi->device->sector_size * 8;
+ if (scsi_get_prot_type(scsi) == SCSI_PROT_DIF_TYPE1) {
+ datalen += datalen / scsi->device->sector_size * 8;
+ fcp->fc_dl = cpu_to_be32(datalen);
+ }
}
/**
@@ -266,19 +271,23 @@
if (unlikely(rsp_flags & FCP_SNS_LEN_VAL)) {
sense = (char *) &fcp_rsp[1];
if (rsp_flags & FCP_RSP_LEN_VAL)
- sense += fcp_rsp->ext.fr_rsp_len;
- sense_len = min(fcp_rsp->ext.fr_sns_len,
- (u32) SCSI_SENSE_BUFFERSIZE);
+ sense += be32_to_cpu(fcp_rsp->ext.fr_rsp_len);
+ sense_len = min_t(u32, be32_to_cpu(fcp_rsp->ext.fr_sns_len),
+ SCSI_SENSE_BUFFERSIZE);
memcpy(scsi->sense_buffer, sense, sense_len);
}
if (unlikely(rsp_flags & FCP_RESID_UNDER)) {
- resid = fcp_rsp->ext.fr_resid;
+ resid = be32_to_cpu(fcp_rsp->ext.fr_resid);
scsi_set_resid(scsi, resid);
if (scsi_bufflen(scsi) - resid < scsi->underflow &&
!(rsp_flags & FCP_SNS_LEN_VAL) &&
fcp_rsp->resp.fr_status == SAM_STAT_GOOD)
set_host_byte(scsi, DID_ERROR);
+ } else if (unlikely(rsp_flags & FCP_RESID_OVER)) {
+ /* FCP_DL was not sufficient for SCSI data length */
+ if (fcp_rsp->resp.fr_status == SAM_STAT_GOOD)
+ set_host_byte(scsi, DID_ERROR);
}
}
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index 27ff38f..69d1dc3 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -3,7 +3,7 @@
*
* Implementation of FSF commands.
*
- * Copyright IBM Corp. 2002, 2015
+ * Copyright IBM Corp. 2002, 2017
*/
#define KMSG_COMPONENT "zfcp"
@@ -197,8 +197,6 @@
switch (sr_buf->status_subtype) {
case FSF_STATUS_READ_SUB_NO_PHYSICAL_LINK:
- zfcp_fsf_link_down_info_eval(req, ldi);
- break;
case FSF_STATUS_READ_SUB_FDISC_FAILED:
zfcp_fsf_link_down_info_eval(req, ldi);
break;
@@ -476,8 +474,8 @@
if (req->data)
memcpy(req->data, bottom, sizeof(*bottom));
- fc_host_port_name(shost) = nsp->fl_wwpn;
- fc_host_node_name(shost) = nsp->fl_wwnn;
+ fc_host_port_name(shost) = be64_to_cpu(nsp->fl_wwpn);
+ fc_host_node_name(shost) = be64_to_cpu(nsp->fl_wwnn);
fc_host_supported_classes(shost) = FC_COS_CLASS2 | FC_COS_CLASS3;
adapter->timer_ticks = bottom->timer_interval & ZFCP_FSF_TIMER_INT_MASK;
@@ -503,8 +501,8 @@
switch (bottom->fc_topology) {
case FSF_TOPO_P2P:
adapter->peer_d_id = ntoh24(bottom->peer_d_id);
- adapter->peer_wwpn = plogi->fl_wwpn;
- adapter->peer_wwnn = plogi->fl_wwnn;
+ adapter->peer_wwpn = be64_to_cpu(plogi->fl_wwpn);
+ adapter->peer_wwnn = be64_to_cpu(plogi->fl_wwnn);
fc_host_port_type(shost) = FC_PORTTYPE_PTP;
break;
case FSF_TOPO_FABRIC:
@@ -928,8 +926,8 @@
switch (header->fsf_status) {
case FSF_GOOD:
- zfcp_dbf_san_res("fsscth2", req);
ct->status = 0;
+ zfcp_dbf_san_res("fsscth2", req);
break;
case FSF_SERVICE_CLASS_NOT_SUPPORTED:
zfcp_fsf_class_not_supp(req);
@@ -991,8 +989,7 @@
qtcb->bottom.support.resp_buf_length =
zfcp_qdio_real_bytes(sg_resp);
- zfcp_qdio_set_data_div(qdio, &req->qdio_req,
- zfcp_qdio_sbale_count(sg_req));
+ zfcp_qdio_set_data_div(qdio, &req->qdio_req, sg_nents(sg_req));
zfcp_qdio_set_sbale_last(qdio, &req->qdio_req);
zfcp_qdio_set_scount(qdio, &req->qdio_req);
return 0;
@@ -1109,8 +1106,8 @@
switch (header->fsf_status) {
case FSF_GOOD:
- zfcp_dbf_san_res("fsselh1", req);
send_els->status = 0;
+ zfcp_dbf_san_res("fsselh1", req);
break;
case FSF_SERVICE_CLASS_NOT_SUPPORTED:
zfcp_fsf_class_not_supp(req);
@@ -1394,6 +1391,8 @@
case FSF_ADAPTER_STATUS_AVAILABLE:
switch (header->fsf_status_qual.word[0]) {
case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE:
+ /* no zfcp_fc_test_link() with failed open port */
+ /* fall through */
case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED:
case FSF_SQ_NO_RETRY_POSSIBLE:
req->status |= ZFCP_STATUS_FSFREQ_ERROR;
@@ -2142,7 +2141,8 @@
zfcp_scsi_dif_sense_error(scpnt, 0x3);
goto skip_fsfstatus;
}
- fcp_rsp = (struct fcp_resp_with_ext *) &req->qtcb->bottom.io.fcp_rsp;
+ BUILD_BUG_ON(sizeof(struct fcp_resp_with_ext) > FSF_FCP_RSP_SIZE);
+ fcp_rsp = &req->qtcb->bottom.io.fcp_rsp.iu;
zfcp_fc_eval_fcp_rsp(fcp_rsp, scpnt);
skip_fsfstatus:
@@ -2255,10 +2255,12 @@
if (zfcp_fsf_set_data_dir(scsi_cmnd, &io->data_direction))
goto failed_scsi_cmnd;
- fcp_cmnd = (struct fcp_cmnd *) &req->qtcb->bottom.io.fcp_cmnd;
+ BUILD_BUG_ON(sizeof(struct fcp_cmnd) > FSF_FCP_CMND_SIZE);
+ fcp_cmnd = &req->qtcb->bottom.io.fcp_cmnd.iu;
zfcp_fc_scsi_to_fcp(fcp_cmnd, scsi_cmnd, 0);
- if (scsi_prot_sg_count(scsi_cmnd)) {
+ if ((scsi_get_prot_op(scsi_cmnd) != SCSI_PROT_NORMAL) &&
+ scsi_prot_sg_count(scsi_cmnd)) {
zfcp_qdio_set_data_div(qdio, &req->qdio_req,
scsi_prot_sg_count(scsi_cmnd));
retval = zfcp_qdio_sbals_from_sg(qdio, &req->qdio_req,
@@ -2299,7 +2301,7 @@
zfcp_fsf_fcp_handler_common(req);
- fcp_rsp = (struct fcp_resp_with_ext *) &req->qtcb->bottom.io.fcp_rsp;
+ fcp_rsp = &req->qtcb->bottom.io.fcp_rsp.iu;
rsp_info = (struct fcp_resp_rsp_info *) &fcp_rsp[1];
if ((rsp_info->rsp_code != FCP_TMF_CMPL) ||
@@ -2348,7 +2350,7 @@
zfcp_qdio_set_sbale_last(qdio, &req->qdio_req);
- fcp_cmnd = (struct fcp_cmnd *) &req->qtcb->bottom.io.fcp_cmnd;
+ fcp_cmnd = &req->qtcb->bottom.io.fcp_cmnd.iu;
zfcp_fc_scsi_to_fcp(fcp_cmnd, scmnd, tm_flags);
zfcp_fsf_start_timer(req, ZFCP_SCSI_ER_TIMEOUT);
@@ -2392,7 +2394,6 @@
req_id, dev_name(&adapter->ccw_device->dev));
}
- fsf_req->qdio_req.sbal_response = sbal_idx;
zfcp_fsf_req_complete(fsf_req);
if (likely(sbale->eflags & SBAL_EFLAGS_LAST_ENTRY))
diff --git a/drivers/s390/scsi/zfcp_fsf.h b/drivers/s390/scsi/zfcp_fsf.h
index ea3c76a..88feba5 100644
--- a/drivers/s390/scsi/zfcp_fsf.h
+++ b/drivers/s390/scsi/zfcp_fsf.h
@@ -3,7 +3,7 @@
*
* Interface to the FSF support functions.
*
- * Copyright IBM Corp. 2002, 2016
+ * Copyright IBM Corp. 2002, 2017
*/
#ifndef FSF_H
@@ -312,8 +312,14 @@
u32 data_block_length;
u32 prot_data_length;
u8 res2[4];
- u8 fcp_cmnd[FSF_FCP_CMND_SIZE];
- u8 fcp_rsp[FSF_FCP_RSP_SIZE];
+ union {
+ u8 byte[FSF_FCP_CMND_SIZE];
+ struct fcp_cmnd iu;
+ } fcp_cmnd;
+ union {
+ u8 byte[FSF_FCP_RSP_SIZE];
+ struct fcp_resp_with_ext iu;
+ } fcp_rsp;
u8 res3[64];
} __attribute__ ((packed));
diff --git a/drivers/s390/scsi/zfcp_qdio.c b/drivers/s390/scsi/zfcp_qdio.c
index dbf2b547..9e358fc 100644
--- a/drivers/s390/scsi/zfcp_qdio.c
+++ b/drivers/s390/scsi/zfcp_qdio.c
@@ -14,7 +14,7 @@
#include "zfcp_ext.h"
#include "zfcp_qdio.h"
-static bool enable_multibuffer = 1;
+static bool enable_multibuffer = true;
module_param_named(datarouter, enable_multibuffer, bool, 0400);
MODULE_PARM_DESC(datarouter, "Enable hardware data router support (default on)");
diff --git a/drivers/s390/scsi/zfcp_qdio.h b/drivers/s390/scsi/zfcp_qdio.h
index 497cd37..7f647a9 100644
--- a/drivers/s390/scsi/zfcp_qdio.h
+++ b/drivers/s390/scsi/zfcp_qdio.h
@@ -54,7 +54,6 @@
* @sbal_last: last sbal for this request
* @sbal_limit: last possible sbal for this request
* @sbale_curr: current sbale at creation of this request
- * @sbal_response: sbal used in interrupt
* @qdio_outb_usage: usage of outbound queue
*/
struct zfcp_qdio_req {
@@ -64,7 +63,6 @@
u8 sbal_last;
u8 sbal_limit;
u8 sbale_curr;
- u8 sbal_response;
u16 qdio_outb_usage;
};
@@ -225,21 +223,6 @@
}
/**
- * zfcp_qdio_sbale_count - count sbale used
- * @sg: pointer to struct scatterlist
- */
-static inline
-unsigned int zfcp_qdio_sbale_count(struct scatterlist *sg)
-{
- unsigned int count = 0;
-
- for (; sg; sg = sg_next(sg))
- count++;
-
- return count;
-}
-
-/**
* zfcp_qdio_real_bytes - count bytes used
* @sg: pointer to struct scatterlist
*/
diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c
index 0678cf7..ec3ddd1 100644
--- a/drivers/s390/scsi/zfcp_scsi.c
+++ b/drivers/s390/scsi/zfcp_scsi.c
@@ -3,7 +3,7 @@
*
* Interface to Linux SCSI midlayer.
*
- * Copyright IBM Corp. 2002, 2016
+ * Copyright IBM Corp. 2002, 2017
*/
#define KMSG_COMPONENT "zfcp"
@@ -28,7 +28,7 @@
module_param_named(dif, enable_dif, bool, 0400);
MODULE_PARM_DESC(dif, "Enable DIF/DIX data integrity support");
-static bool allow_lun_scan = 1;
+static bool allow_lun_scan = true;
module_param(allow_lun_scan, bool, 0600);
MODULE_PARM_DESC(allow_lun_scan, "For NPIV, scan and attach all storage LUNs");
@@ -273,25 +273,29 @@
zfcp_erp_wait(adapter);
ret = fc_block_scsi_eh(scpnt);
- if (ret)
+ if (ret) {
+ zfcp_dbf_scsi_devreset("fiof", scpnt, tm_flags, NULL);
return ret;
+ }
if (!(atomic_read(&adapter->status) &
ZFCP_STATUS_COMMON_RUNNING)) {
- zfcp_dbf_scsi_devreset("nres", scpnt, tm_flags);
+ zfcp_dbf_scsi_devreset("nres", scpnt, tm_flags, NULL);
return SUCCESS;
}
}
- if (!fsf_req)
+ if (!fsf_req) {
+ zfcp_dbf_scsi_devreset("reqf", scpnt, tm_flags, NULL);
return FAILED;
+ }
wait_for_completion(&fsf_req->completion);
if (fsf_req->status & ZFCP_STATUS_FSFREQ_TMFUNCFAILED) {
- zfcp_dbf_scsi_devreset("fail", scpnt, tm_flags);
+ zfcp_dbf_scsi_devreset("fail", scpnt, tm_flags, fsf_req);
retval = FAILED;
} else {
- zfcp_dbf_scsi_devreset("okay", scpnt, tm_flags);
+ zfcp_dbf_scsi_devreset("okay", scpnt, tm_flags, fsf_req);
zfcp_scsi_forget_cmnds(zfcp_sdev, tm_flags);
}
diff --git a/drivers/sbus/char/display7seg.c b/drivers/sbus/char/display7seg.c
index 04efed1..f32765d 100644
--- a/drivers/sbus/char/display7seg.c
+++ b/drivers/sbus/char/display7seg.c
@@ -212,8 +212,8 @@
writeb(regs, p->regs);
- printk(KERN_INFO PFX "7-Segment Display%s at [%s:0x%llx] %s\n",
- op->dev.of_node->full_name,
+ printk(KERN_INFO PFX "7-Segment Display%pOF at [%s:0x%llx] %s\n",
+ op->dev.of_node,
(regs & D7S_FLIP) ? " (FLIPPED)" : "",
op->resource[0].start,
sol_compat ? "in sol_compat mode" : "");
diff --git a/drivers/sbus/char/flash.c b/drivers/sbus/char/flash.c
index 216f923..a610b8d 100644
--- a/drivers/sbus/char/flash.c
+++ b/drivers/sbus/char/flash.c
@@ -181,8 +181,8 @@
}
flash.busy = 0;
- printk(KERN_INFO "%s: OBP Flash, RD %lx[%lx] WR %lx[%lx]\n",
- op->dev.of_node->full_name,
+ printk(KERN_INFO "%pOF: OBP Flash, RD %lx[%lx] WR %lx[%lx]\n",
+ op->dev.of_node,
flash.read_base, flash.read_size,
flash.write_base, flash.write_size);
diff --git a/drivers/sbus/char/uctrl.c b/drivers/sbus/char/uctrl.c
index 57696fc..0a50133 100644
--- a/drivers/sbus/char/uctrl.c
+++ b/drivers/sbus/char/uctrl.c
@@ -379,8 +379,8 @@
}
sbus_writel(UCTRL_INTR_RXNE_REQ|UCTRL_INTR_RXNE_MSK, &p->regs->uctrl_intr);
- printk(KERN_INFO "%s: uctrl regs[0x%p] (irq %d)\n",
- op->dev.of_node->full_name, p->regs, p->irq);
+ printk(KERN_INFO "%pOF: uctrl regs[0x%p] (irq %d)\n",
+ op->dev.of_node, p->regs, p->irq);
uctrl_get_event_status(p);
uctrl_get_external_status(p);
diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c
index 4b3b080..6be77b3 100644
--- a/drivers/scsi/53c700.c
+++ b/drivers/scsi/53c700.c
@@ -168,7 +168,6 @@
STATIC int NCR_700_queuecommand(struct Scsi_Host *h, struct scsi_cmnd *);
STATIC int NCR_700_abort(struct scsi_cmnd * SCpnt);
-STATIC int NCR_700_bus_reset(struct scsi_cmnd * SCpnt);
STATIC int NCR_700_host_reset(struct scsi_cmnd * SCpnt);
STATIC void NCR_700_chip_setup(struct Scsi_Host *host);
STATIC void NCR_700_chip_reset(struct Scsi_Host *host);
@@ -315,7 +314,6 @@
/* Fill in the missing routines from the host template */
tpnt->queuecommand = NCR_700_queuecommand;
tpnt->eh_abort_handler = NCR_700_abort;
- tpnt->eh_bus_reset_handler = NCR_700_bus_reset;
tpnt->eh_host_reset_handler = NCR_700_host_reset;
tpnt->can_queue = NCR_700_COMMAND_SLOTS_PER_HOST;
tpnt->sg_tablesize = NCR_700_SG_SEGMENTS;
@@ -1938,14 +1936,14 @@
}
STATIC int
-NCR_700_bus_reset(struct scsi_cmnd * SCp)
+NCR_700_host_reset(struct scsi_cmnd * SCp)
{
DECLARE_COMPLETION_ONSTACK(complete);
struct NCR_700_Host_Parameters *hostdata =
(struct NCR_700_Host_Parameters *)SCp->device->host->hostdata[0];
scmd_printk(KERN_INFO, SCp,
- "New error handler wants BUS reset, cmd %p\n\t", SCp);
+ "New error handler wants HOST reset, cmd %p\n\t", SCp);
scsi_print_command(SCp);
/* In theory, eh_complete should always be null because the
@@ -1960,6 +1958,7 @@
hostdata->eh_complete = &complete;
NCR_700_internal_bus_reset(SCp->device->host);
+ NCR_700_chip_reset(SCp->device->host);
spin_unlock_irq(SCp->device->host->host_lock);
wait_for_completion(&complete);
@@ -1974,22 +1973,6 @@
return SUCCESS;
}
-STATIC int
-NCR_700_host_reset(struct scsi_cmnd * SCp)
-{
- scmd_printk(KERN_INFO, SCp, "New error handler wants HOST reset\n\t");
- scsi_print_command(SCp);
-
- spin_lock_irq(SCp->device->host->host_lock);
-
- NCR_700_internal_bus_reset(SCp->device->host);
- NCR_700_chip_reset(SCp->device->host);
-
- spin_unlock_irq(SCp->device->host->host_lock);
-
- return SUCCESS;
-}
-
STATIC void
NCR_700_set_period(struct scsi_target *STp, int period)
{
diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index acc3344..8a08122 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -2296,13 +2296,13 @@
/**
- * NCR5380_bus_reset - reset the SCSI bus
+ * NCR5380_host_reset - reset the SCSI host
* @cmd: SCSI command undergoing EH
*
* Returns SUCCESS
*/
-static int NCR5380_bus_reset(struct scsi_cmnd *cmd)
+static int NCR5380_host_reset(struct scsi_cmnd *cmd)
{
struct Scsi_Host *instance = cmd->device->host;
struct NCR5380_hostdata *hostdata = shost_priv(instance);
diff --git a/drivers/scsi/a2091.c b/drivers/scsi/a2091.c
index 9176bfb..61aadc7 100644
--- a/drivers/scsi/a2091.c
+++ b/drivers/scsi/a2091.c
@@ -147,22 +147,6 @@
}
}
-static int a2091_bus_reset(struct scsi_cmnd *cmd)
-{
- struct Scsi_Host *instance = cmd->device->host;
-
- /* FIXME perform bus-specific reset */
-
- /* FIXME 2: kill this function, and let midlayer fall back
- to the same action, calling wd33c93_host_reset() */
-
- spin_lock_irq(instance->host_lock);
- wd33c93_host_reset(cmd);
- spin_unlock_irq(instance->host_lock);
-
- return SUCCESS;
-}
-
static struct scsi_host_template a2091_scsi_template = {
.module = THIS_MODULE,
.name = "Commodore A2091/A590 SCSI",
@@ -171,7 +155,6 @@
.proc_name = "A2901",
.queuecommand = wd33c93_queuecommand,
.eh_abort_handler = wd33c93_abort,
- .eh_bus_reset_handler = a2091_bus_reset,
.eh_host_reset_handler = wd33c93_host_reset,
.can_queue = CAN_QUEUE,
.this_id = 7,
diff --git a/drivers/scsi/a3000.c b/drivers/scsi/a3000.c
index e6375b4..2427a85 100644
--- a/drivers/scsi/a3000.c
+++ b/drivers/scsi/a3000.c
@@ -162,22 +162,6 @@
}
}
-static int a3000_bus_reset(struct scsi_cmnd *cmd)
-{
- struct Scsi_Host *instance = cmd->device->host;
-
- /* FIXME perform bus-specific reset */
-
- /* FIXME 2: kill this entire function, which should
- cause mid-layer to call wd33c93_host_reset anyway? */
-
- spin_lock_irq(instance->host_lock);
- wd33c93_host_reset(cmd);
- spin_unlock_irq(instance->host_lock);
-
- return SUCCESS;
-}
-
static struct scsi_host_template amiga_a3000_scsi_template = {
.module = THIS_MODULE,
.name = "Amiga 3000 built-in SCSI",
@@ -186,7 +170,6 @@
.proc_name = "A3000",
.queuecommand = wd33c93_queuecommand,
.eh_abort_handler = wd33c93_abort,
- .eh_bus_reset_handler = a3000_bus_reset,
.eh_host_reset_handler = wd33c93_host_reset,
.can_queue = CAN_QUEUE,
.this_id = 7,
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index b051d97..a64285a 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -3751,6 +3751,8 @@
struct aac_dev *dev;
unsigned long byte_count = 0;
int nseg;
+ struct scatterlist *sg;
+ int i;
dev = (struct aac_dev *)scsicmd->device->host->hostdata;
// Get rid of old data
@@ -3759,32 +3761,29 @@
psg->sg[0].count = 0;
nseg = scsi_dma_map(scsicmd);
- if (nseg < 0)
+ if (nseg <= 0)
return nseg;
- if (nseg) {
- struct scatterlist *sg;
- int i;
- psg->count = cpu_to_le32(nseg);
+ psg->count = cpu_to_le32(nseg);
- scsi_for_each_sg(scsicmd, sg, nseg, i) {
- psg->sg[i].addr = cpu_to_le32(sg_dma_address(sg));
- psg->sg[i].count = cpu_to_le32(sg_dma_len(sg));
- byte_count += sg_dma_len(sg);
- }
- /* hba wants the size to be exact */
- if (byte_count > scsi_bufflen(scsicmd)) {
- u32 temp = le32_to_cpu(psg->sg[i-1].count) -
- (byte_count - scsi_bufflen(scsicmd));
- psg->sg[i-1].count = cpu_to_le32(temp);
- byte_count = scsi_bufflen(scsicmd);
- }
- /* Check for command underflow */
- if(scsicmd->underflow && (byte_count < scsicmd->underflow)){
- printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n",
- byte_count, scsicmd->underflow);
- }
+ scsi_for_each_sg(scsicmd, sg, nseg, i) {
+ psg->sg[i].addr = cpu_to_le32(sg_dma_address(sg));
+ psg->sg[i].count = cpu_to_le32(sg_dma_len(sg));
+ byte_count += sg_dma_len(sg);
}
+ /* hba wants the size to be exact */
+ if (byte_count > scsi_bufflen(scsicmd)) {
+ u32 temp = le32_to_cpu(psg->sg[i-1].count) -
+ (byte_count - scsi_bufflen(scsicmd));
+ psg->sg[i-1].count = cpu_to_le32(temp);
+ byte_count = scsi_bufflen(scsicmd);
+ }
+ /* Check for command underflow */
+ if (scsicmd->underflow && (byte_count < scsicmd->underflow)) {
+ printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n",
+ byte_count, scsicmd->underflow);
+ }
+
return byte_count;
}
@@ -3795,6 +3794,8 @@
unsigned long byte_count = 0;
u64 addr;
int nseg;
+ struct scatterlist *sg;
+ int i;
dev = (struct aac_dev *)scsicmd->device->host->hostdata;
// Get rid of old data
@@ -3804,34 +3805,31 @@
psg->sg[0].count = 0;
nseg = scsi_dma_map(scsicmd);
- if (nseg < 0)
+ if (nseg <= 0)
return nseg;
- if (nseg) {
- struct scatterlist *sg;
- int i;
- scsi_for_each_sg(scsicmd, sg, nseg, i) {
- int count = sg_dma_len(sg);
- addr = sg_dma_address(sg);
- psg->sg[i].addr[0] = cpu_to_le32(addr & 0xffffffff);
- psg->sg[i].addr[1] = cpu_to_le32(addr>>32);
- psg->sg[i].count = cpu_to_le32(count);
- byte_count += count;
- }
- psg->count = cpu_to_le32(nseg);
- /* hba wants the size to be exact */
- if (byte_count > scsi_bufflen(scsicmd)) {
- u32 temp = le32_to_cpu(psg->sg[i-1].count) -
- (byte_count - scsi_bufflen(scsicmd));
- psg->sg[i-1].count = cpu_to_le32(temp);
- byte_count = scsi_bufflen(scsicmd);
- }
- /* Check for command underflow */
- if(scsicmd->underflow && (byte_count < scsicmd->underflow)){
- printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n",
- byte_count, scsicmd->underflow);
- }
+ scsi_for_each_sg(scsicmd, sg, nseg, i) {
+ int count = sg_dma_len(sg);
+ addr = sg_dma_address(sg);
+ psg->sg[i].addr[0] = cpu_to_le32(addr & 0xffffffff);
+ psg->sg[i].addr[1] = cpu_to_le32(addr>>32);
+ psg->sg[i].count = cpu_to_le32(count);
+ byte_count += count;
}
+ psg->count = cpu_to_le32(nseg);
+ /* hba wants the size to be exact */
+ if (byte_count > scsi_bufflen(scsicmd)) {
+ u32 temp = le32_to_cpu(psg->sg[i-1].count) -
+ (byte_count - scsi_bufflen(scsicmd));
+ psg->sg[i-1].count = cpu_to_le32(temp);
+ byte_count = scsi_bufflen(scsicmd);
+ }
+ /* Check for command underflow */
+ if (scsicmd->underflow && (byte_count < scsicmd->underflow)) {
+ printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n",
+ byte_count, scsicmd->underflow);
+ }
+
return byte_count;
}
@@ -3839,6 +3837,8 @@
{
unsigned long byte_count = 0;
int nseg;
+ struct scatterlist *sg;
+ int i;
// Get rid of old data
psg->count = 0;
@@ -3850,37 +3850,34 @@
psg->sg[0].flags = 0;
nseg = scsi_dma_map(scsicmd);
- if (nseg < 0)
+ if (nseg <= 0)
return nseg;
- if (nseg) {
- struct scatterlist *sg;
- int i;
- scsi_for_each_sg(scsicmd, sg, nseg, i) {
- int count = sg_dma_len(sg);
- u64 addr = sg_dma_address(sg);
- psg->sg[i].next = 0;
- psg->sg[i].prev = 0;
- psg->sg[i].addr[1] = cpu_to_le32((u32)(addr>>32));
- psg->sg[i].addr[0] = cpu_to_le32((u32)(addr & 0xffffffff));
- psg->sg[i].count = cpu_to_le32(count);
- psg->sg[i].flags = 0;
- byte_count += count;
- }
- psg->count = cpu_to_le32(nseg);
- /* hba wants the size to be exact */
- if (byte_count > scsi_bufflen(scsicmd)) {
- u32 temp = le32_to_cpu(psg->sg[i-1].count) -
- (byte_count - scsi_bufflen(scsicmd));
- psg->sg[i-1].count = cpu_to_le32(temp);
- byte_count = scsi_bufflen(scsicmd);
- }
- /* Check for command underflow */
- if(scsicmd->underflow && (byte_count < scsicmd->underflow)){
- printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n",
- byte_count, scsicmd->underflow);
- }
+ scsi_for_each_sg(scsicmd, sg, nseg, i) {
+ int count = sg_dma_len(sg);
+ u64 addr = sg_dma_address(sg);
+ psg->sg[i].next = 0;
+ psg->sg[i].prev = 0;
+ psg->sg[i].addr[1] = cpu_to_le32((u32)(addr>>32));
+ psg->sg[i].addr[0] = cpu_to_le32((u32)(addr & 0xffffffff));
+ psg->sg[i].count = cpu_to_le32(count);
+ psg->sg[i].flags = 0;
+ byte_count += count;
}
+ psg->count = cpu_to_le32(nseg);
+ /* hba wants the size to be exact */
+ if (byte_count > scsi_bufflen(scsicmd)) {
+ u32 temp = le32_to_cpu(psg->sg[i-1].count) -
+ (byte_count - scsi_bufflen(scsicmd));
+ psg->sg[i-1].count = cpu_to_le32(temp);
+ byte_count = scsi_bufflen(scsicmd);
+ }
+ /* Check for command underflow */
+ if (scsicmd->underflow && (byte_count < scsicmd->underflow)) {
+ printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n",
+ byte_count, scsicmd->underflow);
+ }
+
return byte_count;
}
@@ -3889,75 +3886,77 @@
{
unsigned long byte_count = 0;
int nseg;
+ struct scatterlist *sg;
+ int i, conformable = 0;
+ u32 min_size = PAGE_SIZE, cur_size;
nseg = scsi_dma_map(scsicmd);
- if (nseg < 0)
+ if (nseg <= 0)
return nseg;
- if (nseg) {
- struct scatterlist *sg;
- int i, conformable = 0;
- u32 min_size = PAGE_SIZE, cur_size;
- scsi_for_each_sg(scsicmd, sg, nseg, i) {
- int count = sg_dma_len(sg);
- u64 addr = sg_dma_address(sg);
+ scsi_for_each_sg(scsicmd, sg, nseg, i) {
+ int count = sg_dma_len(sg);
+ u64 addr = sg_dma_address(sg);
- BUG_ON(i >= sg_max);
- rio2->sge[i].addrHigh = cpu_to_le32((u32)(addr>>32));
- rio2->sge[i].addrLow = cpu_to_le32((u32)(addr & 0xffffffff));
- cur_size = cpu_to_le32(count);
- rio2->sge[i].length = cur_size;
- rio2->sge[i].flags = 0;
- if (i == 0) {
- conformable = 1;
- rio2->sgeFirstSize = cur_size;
- } else if (i == 1) {
- rio2->sgeNominalSize = cur_size;
+ BUG_ON(i >= sg_max);
+ rio2->sge[i].addrHigh = cpu_to_le32((u32)(addr>>32));
+ rio2->sge[i].addrLow = cpu_to_le32((u32)(addr & 0xffffffff));
+ cur_size = cpu_to_le32(count);
+ rio2->sge[i].length = cur_size;
+ rio2->sge[i].flags = 0;
+ if (i == 0) {
+ conformable = 1;
+ rio2->sgeFirstSize = cur_size;
+ } else if (i == 1) {
+ rio2->sgeNominalSize = cur_size;
+ min_size = cur_size;
+ } else if ((i+1) < nseg && cur_size != rio2->sgeNominalSize) {
+ conformable = 0;
+ if (cur_size < min_size)
min_size = cur_size;
- } else if ((i+1) < nseg && cur_size != rio2->sgeNominalSize) {
- conformable = 0;
- if (cur_size < min_size)
- min_size = cur_size;
- }
- byte_count += count;
}
+ byte_count += count;
+ }
- /* hba wants the size to be exact */
- if (byte_count > scsi_bufflen(scsicmd)) {
- u32 temp = le32_to_cpu(rio2->sge[i-1].length) -
- (byte_count - scsi_bufflen(scsicmd));
- rio2->sge[i-1].length = cpu_to_le32(temp);
- byte_count = scsi_bufflen(scsicmd);
- }
+ /* hba wants the size to be exact */
+ if (byte_count > scsi_bufflen(scsicmd)) {
+ u32 temp = le32_to_cpu(rio2->sge[i-1].length) -
+ (byte_count - scsi_bufflen(scsicmd));
+ rio2->sge[i-1].length = cpu_to_le32(temp);
+ byte_count = scsi_bufflen(scsicmd);
+ }
- rio2->sgeCnt = cpu_to_le32(nseg);
- rio2->flags |= cpu_to_le16(RIO2_SG_FORMAT_IEEE1212);
- /* not conformable: evaluate required sg elements */
- if (!conformable) {
- int j, nseg_new = nseg, err_found;
- for (i = min_size / PAGE_SIZE; i >= 1; --i) {
- err_found = 0;
- nseg_new = 2;
- for (j = 1; j < nseg - 1; ++j) {
- if (rio2->sge[j].length % (i*PAGE_SIZE)) {
- err_found = 1;
- break;
- }
- nseg_new += (rio2->sge[j].length / (i*PAGE_SIZE));
- }
- if (!err_found)
+ rio2->sgeCnt = cpu_to_le32(nseg);
+ rio2->flags |= cpu_to_le16(RIO2_SG_FORMAT_IEEE1212);
+ /* not conformable: evaluate required sg elements */
+ if (!conformable) {
+ int j, nseg_new = nseg, err_found;
+ for (i = min_size / PAGE_SIZE; i >= 1; --i) {
+ err_found = 0;
+ nseg_new = 2;
+ for (j = 1; j < nseg - 1; ++j) {
+ if (rio2->sge[j].length % (i*PAGE_SIZE)) {
+ err_found = 1;
break;
+ }
+ nseg_new += (rio2->sge[j].length / (i*PAGE_SIZE));
}
- if (i > 0 && nseg_new <= sg_max)
- aac_convert_sgraw2(rio2, i, nseg, nseg_new);
- } else
- rio2->flags |= cpu_to_le16(RIO2_SGL_CONFORMANT);
-
- /* Check for command underflow */
- if (scsicmd->underflow && (byte_count < scsicmd->underflow)) {
- printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n",
- byte_count, scsicmd->underflow);
+ if (!err_found)
+ break;
}
+ if (i > 0 && nseg_new <= sg_max) {
+ int ret = aac_convert_sgraw2(rio2, i, nseg, nseg_new);
+
+ if (ret < 0)
+ return ret;
+ }
+ } else
+ rio2->flags |= cpu_to_le16(RIO2_SGL_CONFORMANT);
+
+ /* Check for command underflow */
+ if (scsicmd->underflow && (byte_count < scsicmd->underflow)) {
+ printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n",
+ byte_count, scsicmd->underflow);
}
return byte_count;
@@ -3974,7 +3973,7 @@
sge = kmalloc(nseg_new * sizeof(struct sge_ieee1212), GFP_ATOMIC);
if (sge == NULL)
- return -1;
+ return -ENOMEM;
for (i = 1, pos = 1; i < nseg-1; ++i) {
for (j = 0; j < rio2->sge[i].length / (pages * PAGE_SIZE); ++j) {
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index ee2667e..92fabf2 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -1723,6 +1723,7 @@
#define FIB_CONTEXT_FLAG_FASTRESP (0x00000008)
#define FIB_CONTEXT_FLAG_NATIVE_HBA (0x00000010)
#define FIB_CONTEXT_FLAG_NATIVE_HBA_TMF (0x00000020)
+#define FIB_CONTEXT_FLAG_SCSI_CMD (0x00000040)
/*
* Define the command values
diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c
index 9ee025b..97d269f 100644
--- a/drivers/scsi/aacraid/comminit.c
+++ b/drivers/scsi/aacraid/comminit.c
@@ -520,9 +520,9 @@
dev->raw_io_64 = 1;
dev->sync_mode = aac_sync_mode;
if (dev->a_ops.adapter_comm &&
- (status[1] & AAC_OPT_NEW_COMM)) {
- dev->comm_interface = AAC_COMM_MESSAGE;
- dev->raw_io_interface = 1;
+ (status[1] & AAC_OPT_NEW_COMM)) {
+ dev->comm_interface = AAC_COMM_MESSAGE;
+ dev->raw_io_interface = 1;
if ((status[1] & AAC_OPT_NEW_COMM_TYPE1)) {
/* driver supports TYPE1 (Tupelo) */
dev->comm_interface = AAC_COMM_MESSAGE_TYPE1;
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index 1c617cc..dfe8e70 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -770,7 +770,8 @@
/* bit1 of request_id must be 0 */
hbacmd->request_id =
cpu_to_le32((((u32)(fibptr - dev->fibs)) << 2) + 1);
- } else
+ fibptr->flags |= FIB_CONTEXT_FLAG_SCSI_CMD;
+ } else if (command != HBA_IU_TYPE_SCSI_TM_REQ)
return -EINVAL;
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 0f277df..87cc4a9 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -814,111 +814,225 @@
return ret;
}
+static u8 aac_eh_tmf_lun_reset_fib(struct aac_hba_map_info *info,
+ struct fib *fib, u64 tmf_lun)
+{
+ struct aac_hba_tm_req *tmf;
+ u64 address;
+
+ /* start a HBA_TMF_LUN_RESET TMF request */
+ tmf = (struct aac_hba_tm_req *)fib->hw_fib_va;
+ memset(tmf, 0, sizeof(*tmf));
+ tmf->tmf = HBA_TMF_LUN_RESET;
+ tmf->it_nexus = info->rmw_nexus;
+ int_to_scsilun(tmf_lun, (struct scsi_lun *)tmf->lun);
+
+ address = (u64)fib->hw_error_pa;
+ tmf->error_ptr_hi = cpu_to_le32
+ ((u32)(address >> 32));
+ tmf->error_ptr_lo = cpu_to_le32
+ ((u32)(address & 0xffffffff));
+ tmf->error_length = cpu_to_le32(FW_ERROR_BUFFER_SIZE);
+ fib->hbacmd_size = sizeof(*tmf);
+
+ return HBA_IU_TYPE_SCSI_TM_REQ;
+}
+
+static u8 aac_eh_tmf_hard_reset_fib(struct aac_hba_map_info *info,
+ struct fib *fib)
+{
+ struct aac_hba_reset_req *rst;
+ u64 address;
+
+ /* already tried, start a hard reset now */
+ rst = (struct aac_hba_reset_req *)fib->hw_fib_va;
+ memset(rst, 0, sizeof(*rst));
+ rst->it_nexus = info->rmw_nexus;
+
+ address = (u64)fib->hw_error_pa;
+ rst->error_ptr_hi = cpu_to_le32((u32)(address >> 32));
+ rst->error_ptr_lo = cpu_to_le32
+ ((u32)(address & 0xffffffff));
+ rst->error_length = cpu_to_le32(FW_ERROR_BUFFER_SIZE);
+ fib->hbacmd_size = sizeof(*rst);
+
+ return HBA_IU_TYPE_SATA_REQ;
+}
+
+void aac_tmf_callback(void *context, struct fib *fibptr)
+{
+ struct aac_hba_resp *err =
+ &((struct aac_native_hba *)fibptr->hw_fib_va)->resp.err;
+ struct aac_hba_map_info *info = context;
+ int res;
+
+ switch (err->service_response) {
+ case HBA_RESP_SVCRES_TMF_REJECTED:
+ res = -1;
+ break;
+ case HBA_RESP_SVCRES_TMF_LUN_INVALID:
+ res = 0;
+ break;
+ case HBA_RESP_SVCRES_TMF_COMPLETE:
+ case HBA_RESP_SVCRES_TMF_SUCCEEDED:
+ res = 0;
+ break;
+ default:
+ res = -2;
+ break;
+ }
+ aac_fib_complete(fibptr);
+
+ info->reset_state = res;
+}
+
/*
- * aac_eh_reset - Reset command handling
+ * aac_eh_dev_reset - Device reset command handling
* @scsi_cmd: SCSI command block causing the reset
*
*/
-static int aac_eh_reset(struct scsi_cmnd* cmd)
+static int aac_eh_dev_reset(struct scsi_cmnd *cmd)
+{
+ struct scsi_device * dev = cmd->device;
+ struct Scsi_Host * host = dev->host;
+ struct aac_dev * aac = (struct aac_dev *)host->hostdata;
+ struct aac_hba_map_info *info;
+ int count;
+ u32 bus, cid;
+ struct fib *fib;
+ int ret = FAILED;
+ int status;
+ u8 command;
+
+ bus = aac_logical_to_phys(scmd_channel(cmd));
+ cid = scmd_id(cmd);
+ info = &aac->hba_map[bus][cid];
+ if (bus >= AAC_MAX_BUSES || cid >= AAC_MAX_TARGETS ||
+ info->devtype != AAC_DEVTYPE_NATIVE_RAW)
+ return FAILED;
+
+ if (info->reset_state > 0)
+ return FAILED;
+
+ pr_err("%s: Host adapter reset request. SCSI hang ?\n",
+ AAC_DRIVERNAME);
+
+ fib = aac_fib_alloc(aac);
+ if (!fib)
+ return ret;
+
+ /* start a HBA_TMF_LUN_RESET TMF request */
+ command = aac_eh_tmf_lun_reset_fib(info, fib, dev->lun);
+
+ info->reset_state = 1;
+
+ status = aac_hba_send(command, fib,
+ (fib_callback) aac_tmf_callback,
+ (void *) info);
+
+ /* Wait up to 15 seconds for completion */
+ for (count = 0; count < 15; ++count) {
+ if (info->reset_state == 0) {
+ ret = info->reset_state == 0 ? SUCCESS : FAILED;
+ break;
+ }
+ msleep(1000);
+ }
+
+ return ret;
+}
+
+/*
+ * aac_eh_target_reset - Target reset command handling
+ * @scsi_cmd: SCSI command block causing the reset
+ *
+ */
+static int aac_eh_target_reset(struct scsi_cmnd *cmd)
+{
+ struct scsi_device * dev = cmd->device;
+ struct Scsi_Host * host = dev->host;
+ struct aac_dev * aac = (struct aac_dev *)host->hostdata;
+ struct aac_hba_map_info *info;
+ int count;
+ u32 bus, cid;
+ int ret = FAILED;
+ struct fib *fib;
+ int status;
+ u8 command;
+
+ bus = aac_logical_to_phys(scmd_channel(cmd));
+ cid = scmd_id(cmd);
+ info = &aac->hba_map[bus][cid];
+ if (bus >= AAC_MAX_BUSES || cid >= AAC_MAX_TARGETS ||
+ info->devtype != AAC_DEVTYPE_NATIVE_RAW)
+ return FAILED;
+
+ if (info->reset_state > 0)
+ return FAILED;
+
+ pr_err("%s: Host adapter reset request. SCSI hang ?\n",
+ AAC_DRIVERNAME);
+
+ fib = aac_fib_alloc(aac);
+ if (!fib)
+ return ret;
+
+
+ /* already tried, start a hard reset now */
+ command = aac_eh_tmf_hard_reset_fib(info, fib);
+
+ info->reset_state = 2;
+
+ status = aac_hba_send(command, fib,
+ (fib_callback) aac_tmf_callback,
+ (void *) info);
+
+ /* Wait up to 15 seconds for completion */
+ for (count = 0; count < 15; ++count) {
+ if (info->reset_state <= 0) {
+ ret = info->reset_state == 0 ? SUCCESS : FAILED;
+ break;
+ }
+ msleep(1000);
+ }
+
+ return ret;
+}
+
+/*
+ * aac_eh_bus_reset - Bus reset command handling
+ * @scsi_cmd: SCSI command block causing the reset
+ *
+ */
+static int aac_eh_bus_reset(struct scsi_cmnd* cmd)
{
struct scsi_device * dev = cmd->device;
struct Scsi_Host * host = dev->host;
struct aac_dev * aac = (struct aac_dev *)host->hostdata;
int count;
- u32 bus, cid;
- int ret = FAILED;
+ u32 cmd_bus;
int status = 0;
- __le32 supported_options2 = 0;
- bool is_mu_reset;
- bool is_ignore_reset;
- bool is_doorbell_reset;
- bus = aac_logical_to_phys(scmd_channel(cmd));
- cid = scmd_id(cmd);
- if (bus < AAC_MAX_BUSES && cid < AAC_MAX_TARGETS &&
- aac->hba_map[bus][cid].devtype == AAC_DEVTYPE_NATIVE_RAW) {
- struct fib *fib;
- int status;
- u64 address;
- u8 command;
+ cmd_bus = aac_logical_to_phys(scmd_channel(cmd));
+ /* Mark the assoc. FIB to not complete, eh handler does this */
+ for (count = 0; count < (host->can_queue + AAC_NUM_MGT_FIB); ++count) {
+ struct fib *fib = &aac->fibs[count];
- pr_err("%s: Host adapter reset request. SCSI hang ?\n",
- AAC_DRIVERNAME);
+ if (fib->hw_fib_va->header.XferState &&
+ (fib->flags & FIB_CONTEXT_FLAG) &&
+ (fib->flags & FIB_CONTEXT_FLAG_SCSI_CMD)) {
+ struct aac_hba_map_info *info;
+ u32 bus, cid;
- fib = aac_fib_alloc(aac);
- if (!fib)
- return ret;
-
-
- if (aac->hba_map[bus][cid].reset_state == 0) {
- struct aac_hba_tm_req *tmf;
-
- /* start a HBA_TMF_LUN_RESET TMF request */
- tmf = (struct aac_hba_tm_req *)fib->hw_fib_va;
- memset(tmf, 0, sizeof(*tmf));
- tmf->tmf = HBA_TMF_LUN_RESET;
- tmf->it_nexus = aac->hba_map[bus][cid].rmw_nexus;
- tmf->lun[1] = cmd->device->lun;
-
- address = (u64)fib->hw_error_pa;
- tmf->error_ptr_hi = cpu_to_le32
- ((u32)(address >> 32));
- tmf->error_ptr_lo = cpu_to_le32
- ((u32)(address & 0xffffffff));
- tmf->error_length = cpu_to_le32(FW_ERROR_BUFFER_SIZE);
- fib->hbacmd_size = sizeof(*tmf);
-
- command = HBA_IU_TYPE_SCSI_TM_REQ;
- aac->hba_map[bus][cid].reset_state++;
- } else if (aac->hba_map[bus][cid].reset_state >= 1) {
- struct aac_hba_reset_req *rst;
-
- /* already tried, start a hard reset now */
- rst = (struct aac_hba_reset_req *)fib->hw_fib_va;
- memset(rst, 0, sizeof(*rst));
- /* reset_type is already zero... */
- rst->it_nexus = aac->hba_map[bus][cid].rmw_nexus;
-
- address = (u64)fib->hw_error_pa;
- rst->error_ptr_hi = cpu_to_le32((u32)(address >> 32));
- rst->error_ptr_lo = cpu_to_le32
- ((u32)(address & 0xffffffff));
- rst->error_length = cpu_to_le32(FW_ERROR_BUFFER_SIZE);
- fib->hbacmd_size = sizeof(*rst);
-
- command = HBA_IU_TYPE_SATA_REQ;
- aac->hba_map[bus][cid].reset_state = 0;
- }
- cmd->SCp.sent_command = 0;
-
- status = aac_hba_send(command, fib,
- (fib_callback) aac_hba_callback,
- (void *) cmd);
-
- /* Wait up to 15 seconds for completion */
- for (count = 0; count < 15; ++count) {
- if (cmd->SCp.sent_command) {
- ret = SUCCESS;
- break;
- }
- msleep(1000);
- }
-
- if (ret == SUCCESS)
- goto out;
-
- } else {
-
- /* Mark the assoc. FIB to not complete, eh handler does this */
- for (count = 0;
- count < (host->can_queue + AAC_NUM_MGT_FIB);
- ++count) {
- struct fib *fib = &aac->fibs[count];
-
- if (fib->hw_fib_va->header.XferState &&
- (fib->flags & FIB_CONTEXT_FLAG) &&
- (fib->callback_data == cmd)) {
+ cmd = (struct scsi_cmnd *)fib->callback_data;
+ bus = aac_logical_to_phys(scmd_channel(cmd));
+ if (bus != cmd_bus)
+ continue;
+ cid = scmd_id(cmd);
+ info = &aac->hba_map[bus][cid];
+ if (bus >= AAC_MAX_BUSES || cid >= AAC_MAX_TARGETS ||
+ info->devtype != AAC_DEVTYPE_NATIVE_RAW) {
fib->flags |= FIB_CONTEXT_FLAG_TIMED_OUT;
cmd->SCp.phase = AAC_OWNER_ERROR_HANDLER;
}
@@ -935,8 +1049,24 @@
dev_err(&aac->pdev->dev, "Adapter health - %d\n", status);
count = get_num_of_incomplete_fibs(aac);
- if (count == 0)
- return SUCCESS;
+ return (count == 0) ? SUCCESS : FAILED;
+}
+
+/*
+ * aac_eh_host_reset - Host reset command handling
+ * @scsi_cmd: SCSI command block causing the reset
+ *
+ */
+int aac_eh_host_reset(struct scsi_cmnd *cmd)
+{
+ struct scsi_device * dev = cmd->device;
+ struct Scsi_Host * host = dev->host;
+ struct aac_dev * aac = (struct aac_dev *)host->hostdata;
+ int ret = FAILED;
+ __le32 supported_options2 = 0;
+ bool is_mu_reset;
+ bool is_ignore_reset;
+ bool is_doorbell_reset;
/*
* Check if reset is supported by the firmware
@@ -954,11 +1084,24 @@
&& aac_check_reset
&& (aac_check_reset != -1 || !is_ignore_reset)) {
/* Bypass wait for command quiesce */
- aac_reset_adapter(aac, 2, IOP_HWSOFT_RESET);
+ if (aac_reset_adapter(aac, 2, IOP_HWSOFT_RESET) == 0)
+ ret = SUCCESS;
}
- ret = SUCCESS;
+ /*
+ * Reset EH state
+ */
+ if (ret == SUCCESS) {
+ int bus, cid;
+ struct aac_hba_map_info *info;
-out:
+ for (bus = 0; bus < AAC_MAX_BUSES; bus++) {
+ for (cid = 0; cid < AAC_MAX_TARGETS; cid++) {
+ info = &aac->hba_map[bus][cid];
+ if (info->devtype == AAC_DEVTYPE_NATIVE_RAW)
+ info->reset_state = 0;
+ }
+ }
+ }
return ret;
}
@@ -1382,7 +1525,10 @@
.change_queue_depth = aac_change_queue_depth,
.sdev_attrs = aac_dev_attrs,
.eh_abort_handler = aac_eh_abort,
- .eh_host_reset_handler = aac_eh_reset,
+ .eh_device_reset_handler = aac_eh_dev_reset,
+ .eh_target_reset_handler = aac_eh_target_reset,
+ .eh_bus_reset_handler = aac_eh_bus_reset,
+ .eh_host_reset_handler = aac_eh_host_reset,
.can_queue = AAC_NUM_IO_FIB,
.this_id = MAXIMUM_NUM_CONTAINERS,
.sg_tablesize = 16,
@@ -1457,7 +1603,7 @@
/*
* Only series 7 needs freset.
*/
- if (pdev->device == PMC_DEVICE_S7)
+ if (pdev->device == PMC_DEVICE_S7)
pdev->needs_freset = 1;
list_for_each_entry(aac, &aac_devices, entry) {
diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c
index ce5dc73..bc0058d 100644
--- a/drivers/scsi/aha152x.c
+++ b/drivers/scsi/aha152x.c
@@ -1140,6 +1140,9 @@
/*
* Reset the bus
*
+ * AIC-6260 has a hard reset (MRST signal), but apparently
+ * one cannot trigger it via software. So live with
+ * a soft reset; no-one seemed to have cared.
*/
static int aha152x_bus_reset_host(struct Scsi_Host *shpnt)
{
@@ -1223,15 +1226,6 @@
}
/*
- * Reset the host (bus and controller)
- *
- */
-static int aha152x_host_reset(Scsi_Cmnd *SCpnt)
-{
- return aha152x_host_reset_host(SCpnt->device->host);
-}
-
-/*
* Return the "logical geometry"
*
*/
@@ -2917,7 +2911,6 @@
.eh_abort_handler = aha152x_abort,
.eh_device_reset_handler = aha152x_device_reset,
.eh_bus_reset_handler = aha152x_bus_reset,
- .eh_host_reset_handler = aha152x_host_reset,
.bios_param = aha152x_biosparam,
.can_queue = 1,
.this_id = 7,
diff --git a/drivers/scsi/aha1542.c b/drivers/scsi/aha1542.c
index a23cc9a..1242179 100644
--- a/drivers/scsi/aha1542.c
+++ b/drivers/scsi/aha1542.c
@@ -986,7 +986,7 @@
static int isa_registered;
#ifdef CONFIG_PNP
-static struct pnp_device_id aha1542_pnp_ids[] = {
+static const struct pnp_device_id aha1542_pnp_ids[] = {
{ .id = "ADP1542" },
{ .id = "" }
};
diff --git a/drivers/scsi/aic7xxx/Makefile b/drivers/scsi/aic7xxx/Makefile
index 07b60a7..b03ba0d 100644
--- a/drivers/scsi/aic7xxx/Makefile
+++ b/drivers/scsi/aic7xxx/Makefile
@@ -59,7 +59,8 @@
$(aicasm-7xxx-opts-y) -o $(obj)/aic7xxx_seq.h \
$(srctree)/$(src)/aic7xxx.seq
-$(aic7xxx-gen-y): $(obj)/aic7xxx_seq.h
+$(aic7xxx-gen-y): $(objtree)/$(obj)/aic7xxx_seq.h
+ @true
else
$(obj)/aic7xxx_reg_print.c: $(src)/aic7xxx_reg_print.c_shipped
endif
@@ -76,7 +77,8 @@
$(aicasm-79xx-opts-y) -o $(obj)/aic79xx_seq.h \
$(srctree)/$(src)/aic79xx.seq
-$(aic79xx-gen-y): $(obj)/aic79xx_seq.h
+$(aic79xx-gen-y): $(objtree)/$(obj)/aic79xx_seq.h
+ @true
else
$(obj)/aic79xx_reg_print.c: $(src)/aic79xx_reg_print.c_shipped
endif
diff --git a/drivers/scsi/aic7xxx/aic79xx_reg.h_shipped b/drivers/scsi/aic7xxx/aic79xx_reg.h_shipped
index cdcead0..ddcd5a7 100644
--- a/drivers/scsi/aic7xxx/aic79xx_reg.h_shipped
+++ b/drivers/scsi/aic7xxx/aic79xx_reg.h_shipped
@@ -13,13 +13,6 @@
} ahd_reg_parse_entry_t;
#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_mode_ptr_print;
-#else
-#define ahd_mode_ptr_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "MODE_PTR", 0x00, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
ahd_reg_print_t ahd_intstat_print;
#else
#define ahd_intstat_print(regvalue, cur_col, wrap) \
@@ -27,27 +20,6 @@
#endif
#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_seqintcode_print;
-#else
-#define ahd_seqintcode_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "SEQINTCODE", 0x02, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_error_print;
-#else
-#define ahd_error_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "ERROR", 0x04, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_hescb_qoff_print;
-#else
-#define ahd_hescb_qoff_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "HESCB_QOFF", 0x08, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
ahd_reg_print_t ahd_hs_mailbox_print;
#else
#define ahd_hs_mailbox_print(regvalue, cur_col, wrap) \
@@ -62,27 +34,6 @@
#endif
#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_clrseqintstat_print;
-#else
-#define ahd_clrseqintstat_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "CLRSEQINTSTAT", 0x0c, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_swtimer_print;
-#else
-#define ahd_swtimer_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "SWTIMER", 0x0e, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_sescb_qoff_print;
-#else
-#define ahd_sescb_qoff_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "SESCB_QOFF", 0x12, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
ahd_reg_print_t ahd_intctl_print;
#else
#define ahd_intctl_print(regvalue, cur_col, wrap) \
@@ -111,111 +62,6 @@
#endif
#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_lqin_print;
-#else
-#define ahd_lqin_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "LQIN", 0x20, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_lunptr_print;
-#else
-#define ahd_lunptr_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "LUNPTR", 0x22, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_cmdlenptr_print;
-#else
-#define ahd_cmdlenptr_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "CMDLENPTR", 0x25, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_attrptr_print;
-#else
-#define ahd_attrptr_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "ATTRPTR", 0x26, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_flagptr_print;
-#else
-#define ahd_flagptr_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "FLAGPTR", 0x27, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_cmdptr_print;
-#else
-#define ahd_cmdptr_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "CMDPTR", 0x28, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_qnextptr_print;
-#else
-#define ahd_qnextptr_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "QNEXTPTR", 0x29, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_abrtbyteptr_print;
-#else
-#define ahd_abrtbyteptr_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "ABRTBYTEPTR", 0x2b, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_abrtbitptr_print;
-#else
-#define ahd_abrtbitptr_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "ABRTBITPTR", 0x2c, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_lunlen_print;
-#else
-#define ahd_lunlen_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "LUNLEN", 0x30, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_cdblimit_print;
-#else
-#define ahd_cdblimit_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "CDBLIMIT", 0x31, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_maxcmd_print;
-#else
-#define ahd_maxcmd_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "MAXCMD", 0x32, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_maxcmdcnt_print;
-#else
-#define ahd_maxcmdcnt_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "MAXCMDCNT", 0x33, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_lqctl1_print;
-#else
-#define ahd_lqctl1_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "LQCTL1", 0x38, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_lqctl2_print;
-#else
-#define ahd_lqctl2_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "LQCTL2", 0x39, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
ahd_reg_print_t ahd_scsiseq0_print;
#else
#define ahd_scsiseq0_print(regvalue, cur_col, wrap) \
@@ -230,13 +76,6 @@
#endif
#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_sxfrctl0_print;
-#else
-#define ahd_sxfrctl0_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "SXFRCTL0", 0x3c, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
ahd_reg_print_t ahd_dffstat_print;
#else
#define ahd_dffstat_print(regvalue, cur_col, wrap) \
@@ -244,13 +83,6 @@
#endif
#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_multargid_print;
-#else
-#define ahd_multargid_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "MULTARGID", 0x40, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
ahd_reg_print_t ahd_scsisigi_print;
#else
#define ahd_scsisigi_print(regvalue, cur_col, wrap) \
@@ -265,13 +97,6 @@
#endif
#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_scsidat_print;
-#else
-#define ahd_scsidat_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "SCSIDAT", 0x44, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
ahd_reg_print_t ahd_scsibus_print;
#else
#define ahd_scsibus_print(regvalue, cur_col, wrap) \
@@ -279,13 +104,6 @@
#endif
#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_targidin_print;
-#else
-#define ahd_targidin_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "TARGIDIN", 0x48, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
ahd_reg_print_t ahd_selid_print;
#else
#define ahd_selid_print(regvalue, cur_col, wrap) \
@@ -293,10 +111,10 @@
#endif
#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_sblkctl_print;
+ahd_reg_print_t ahd_simode0_print;
#else
-#define ahd_sblkctl_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "SBLKCTL", 0x4a, regvalue, cur_col, wrap)
+#define ahd_simode0_print(regvalue, cur_col, wrap) \
+ ahd_print_register(NULL, 0, "SIMODE0", 0x4b, regvalue, cur_col, wrap)
#endif
#if AIC_DEBUG_REGISTERS
@@ -307,13 +125,6 @@
#endif
#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_simode0_print;
-#else
-#define ahd_simode0_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "SIMODE0", 0x4b, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
ahd_reg_print_t ahd_sstat1_print;
#else
#define ahd_sstat1_print(regvalue, cur_col, wrap) \
@@ -328,13 +139,6 @@
#endif
#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_clrsint2_print;
-#else
-#define ahd_clrsint2_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "CLRSINT2", 0x4d, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
ahd_reg_print_t ahd_perrdiag_print;
#else
#define ahd_perrdiag_print(regvalue, cur_col, wrap) \
@@ -342,13 +146,6 @@
#endif
#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_lqistate_print;
-#else
-#define ahd_lqistate_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "LQISTATE", 0x4e, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
ahd_reg_print_t ahd_soffcnt_print;
#else
#define ahd_soffcnt_print(regvalue, cur_col, wrap) \
@@ -356,13 +153,6 @@
#endif
#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_lqostate_print;
-#else
-#define ahd_lqostate_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "LQOSTATE", 0x4f, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
ahd_reg_print_t ahd_lqistat0_print;
#else
#define ahd_lqistat0_print(regvalue, cur_col, wrap) \
@@ -370,27 +160,6 @@
#endif
#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_clrlqiint0_print;
-#else
-#define ahd_clrlqiint0_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "CLRLQIINT0", 0x50, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_lqimode0_print;
-#else
-#define ahd_lqimode0_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "LQIMODE0", 0x50, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_lqimode1_print;
-#else
-#define ahd_lqimode1_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "LQIMODE1", 0x51, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
ahd_reg_print_t ahd_lqistat1_print;
#else
#define ahd_lqistat1_print(regvalue, cur_col, wrap) \
@@ -398,13 +167,6 @@
#endif
#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_clrlqiint1_print;
-#else
-#define ahd_clrlqiint1_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "CLRLQIINT1", 0x51, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
ahd_reg_print_t ahd_lqistat2_print;
#else
#define ahd_lqistat2_print(regvalue, cur_col, wrap) \
@@ -419,20 +181,6 @@
#endif
#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_simode3_print;
-#else
-#define ahd_simode3_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "SIMODE3", 0x53, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_clrsint3_print;
-#else
-#define ahd_clrsint3_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "CLRSINT3", 0x53, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
ahd_reg_print_t ahd_lqostat0_print;
#else
#define ahd_lqostat0_print(regvalue, cur_col, wrap) \
@@ -440,27 +188,6 @@
#endif
#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_clrlqoint0_print;
-#else
-#define ahd_clrlqoint0_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "CLRLQOINT0", 0x54, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_lqomode0_print;
-#else
-#define ahd_lqomode0_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "LQOMODE0", 0x54, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_lqomode1_print;
-#else
-#define ahd_lqomode1_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "LQOMODE1", 0x55, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
ahd_reg_print_t ahd_lqostat1_print;
#else
#define ahd_lqostat1_print(regvalue, cur_col, wrap) \
@@ -468,13 +195,6 @@
#endif
#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_clrlqoint1_print;
-#else
-#define ahd_clrlqoint1_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "CLRLQOINT1", 0x55, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
ahd_reg_print_t ahd_lqostat2_print;
#else
#define ahd_lqostat2_print(regvalue, cur_col, wrap) \
@@ -482,13 +202,6 @@
#endif
#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_os_space_cnt_print;
-#else
-#define ahd_os_space_cnt_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "OS_SPACE_CNT", 0x56, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
ahd_reg_print_t ahd_simode1_print;
#else
#define ahd_simode1_print(regvalue, cur_col, wrap) \
@@ -496,13 +209,6 @@
#endif
#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_gsfifo_print;
-#else
-#define ahd_gsfifo_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "GSFIFO", 0x58, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
ahd_reg_print_t ahd_dffsxfrctl_print;
#else
#define ahd_dffsxfrctl_print(regvalue, cur_col, wrap) \
@@ -510,27 +216,6 @@
#endif
#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_lqoscsctl_print;
-#else
-#define ahd_lqoscsctl_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "LQOSCSCTL", 0x5a, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_nextscb_print;
-#else
-#define ahd_nextscb_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "NEXTSCB", 0x5a, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_clrseqintsrc_print;
-#else
-#define ahd_clrseqintsrc_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "CLRSEQINTSRC", 0x5b, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
ahd_reg_print_t ahd_seqintsrc_print;
#else
#define ahd_seqintsrc_print(regvalue, cur_col, wrap) \
@@ -538,13 +223,6 @@
#endif
#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_currscb_print;
-#else
-#define ahd_currscb_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "CURRSCB", 0x5c, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
ahd_reg_print_t ahd_seqimode_print;
#else
#define ahd_seqimode_print(regvalue, cur_col, wrap) \
@@ -559,90 +237,6 @@
#endif
#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_lastscb_print;
-#else
-#define ahd_lastscb_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "LASTSCB", 0x5e, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_negoaddr_print;
-#else
-#define ahd_negoaddr_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "NEGOADDR", 0x60, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_negperiod_print;
-#else
-#define ahd_negperiod_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "NEGPERIOD", 0x61, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_negoffset_print;
-#else
-#define ahd_negoffset_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "NEGOFFSET", 0x62, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_negppropts_print;
-#else
-#define ahd_negppropts_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "NEGPPROPTS", 0x63, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_negconopts_print;
-#else
-#define ahd_negconopts_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "NEGCONOPTS", 0x64, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_annexcol_print;
-#else
-#define ahd_annexcol_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "ANNEXCOL", 0x65, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_annexdat_print;
-#else
-#define ahd_annexdat_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "ANNEXDAT", 0x66, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_scschkn_print;
-#else
-#define ahd_scschkn_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "SCSCHKN", 0x66, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_iownid_print;
-#else
-#define ahd_iownid_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "IOWNID", 0x67, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_shcnt_print;
-#else
-#define ahd_shcnt_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "SHCNT", 0x68, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_townid_print;
-#else
-#define ahd_townid_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "TOWNID", 0x69, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
ahd_reg_print_t ahd_seloid_print;
#else
#define ahd_seloid_print(regvalue, cur_col, wrap) \
@@ -650,90 +244,6 @@
#endif
#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_scbhaddr_print;
-#else
-#define ahd_scbhaddr_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "SCBHADDR", 0x7c, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_sghaddr_print;
-#else
-#define ahd_sghaddr_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "SGHADDR", 0x7c, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_scbhcnt_print;
-#else
-#define ahd_scbhcnt_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "SCBHCNT", 0x84, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_sghcnt_print;
-#else
-#define ahd_sghcnt_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "SGHCNT", 0x84, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_pcixctl_print;
-#else
-#define ahd_pcixctl_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "PCIXCTL", 0x93, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_dchspltstat0_print;
-#else
-#define ahd_dchspltstat0_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "DCHSPLTSTAT0", 0x96, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_dchspltstat1_print;
-#else
-#define ahd_dchspltstat1_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "DCHSPLTSTAT1", 0x97, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_sgspltstat0_print;
-#else
-#define ahd_sgspltstat0_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "SGSPLTSTAT0", 0x9e, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_sgspltstat1_print;
-#else
-#define ahd_sgspltstat1_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "SGSPLTSTAT1", 0x9f, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_df0pcistat_print;
-#else
-#define ahd_df0pcistat_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "DF0PCISTAT", 0xa0, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_reg0_print;
-#else
-#define ahd_reg0_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "REG0", 0xa0, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_reg_isr_print;
-#else
-#define ahd_reg_isr_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "REG_ISR", 0xa4, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
ahd_reg_print_t ahd_sg_state_print;
#else
#define ahd_sg_state_print(regvalue, cur_col, wrap) \
@@ -741,27 +251,6 @@
#endif
#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_targpcistat_print;
-#else
-#define ahd_targpcistat_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "TARGPCISTAT", 0xa7, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_scbautoptr_print;
-#else
-#define ahd_scbautoptr_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "SCBAUTOPTR", 0xab, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_ccscbaddr_print;
-#else
-#define ahd_ccscbaddr_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "CCSCBADDR", 0xac, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
ahd_reg_print_t ahd_ccscbctl_print;
#else
#define ahd_ccscbctl_print(regvalue, cur_col, wrap) \
@@ -776,69 +265,6 @@
#endif
#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_ccscbram_print;
-#else
-#define ahd_ccscbram_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "CCSCBRAM", 0xb0, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_brddat_print;
-#else
-#define ahd_brddat_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "BRDDAT", 0xb8, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_seeadr_print;
-#else
-#define ahd_seeadr_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "SEEADR", 0xba, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_seedat_print;
-#else
-#define ahd_seedat_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "SEEDAT", 0xbc, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_seectl_print;
-#else
-#define ahd_seectl_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "SEECTL", 0xbe, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_seestat_print;
-#else
-#define ahd_seestat_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "SEESTAT", 0xbe, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_dspdatactl_print;
-#else
-#define ahd_dspdatactl_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "DSPDATACTL", 0xc1, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_dspselect_print;
-#else
-#define ahd_dspselect_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "DSPSELECT", 0xc4, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_wrtbiasctl_print;
-#else
-#define ahd_wrtbiasctl_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "WRTBIASCTL", 0xc5, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
ahd_reg_print_t ahd_seqctl0_print;
#else
#define ahd_seqctl0_print(regvalue, cur_col, wrap) \
@@ -853,62 +279,6 @@
#endif
#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_prgmcnt_print;
-#else
-#define ahd_prgmcnt_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "PRGMCNT", 0xde, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_none_print;
-#else
-#define ahd_none_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "NONE", 0xea, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_intvec1_addr_print;
-#else
-#define ahd_intvec1_addr_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "INTVEC1_ADDR", 0xf4, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_curaddr_print;
-#else
-#define ahd_curaddr_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "CURADDR", 0xf4, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_intvec2_addr_print;
-#else
-#define ahd_intvec2_addr_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "INTVEC2_ADDR", 0xf6, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_longjmp_addr_print;
-#else
-#define ahd_longjmp_addr_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "LONGJMP_ADDR", 0xf8, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_accum_save_print;
-#else
-#define ahd_accum_save_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "ACCUM_SAVE", 0xfa, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_waiting_scb_tails_print;
-#else
-#define ahd_waiting_scb_tails_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "WAITING_SCB_TAILS", 0x100, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
ahd_reg_print_t ahd_sram_base_print;
#else
#define ahd_sram_base_print(regvalue, cur_col, wrap) \
@@ -916,62 +286,6 @@
#endif
#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_waiting_tid_head_print;
-#else
-#define ahd_waiting_tid_head_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "WAITING_TID_HEAD", 0x120, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_waiting_tid_tail_print;
-#else
-#define ahd_waiting_tid_tail_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "WAITING_TID_TAIL", 0x122, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_next_queued_scb_addr_print;
-#else
-#define ahd_next_queued_scb_addr_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "NEXT_QUEUED_SCB_ADDR", 0x124, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_complete_scb_head_print;
-#else
-#define ahd_complete_scb_head_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "COMPLETE_SCB_HEAD", 0x128, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_complete_scb_dmainprog_head_print;
-#else
-#define ahd_complete_scb_dmainprog_head_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "COMPLETE_SCB_DMAINPROG_HEAD", 0x12a, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_complete_dma_scb_head_print;
-#else
-#define ahd_complete_dma_scb_head_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "COMPLETE_DMA_SCB_HEAD", 0x12c, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_complete_dma_scb_tail_print;
-#else
-#define ahd_complete_dma_scb_tail_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "COMPLETE_DMA_SCB_TAIL", 0x12e, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_complete_on_qfreeze_head_print;
-#else
-#define ahd_complete_on_qfreeze_head_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "COMPLETE_ON_QFREEZE_HEAD", 0x130, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
ahd_reg_print_t ahd_qfreeze_count_print;
#else
#define ahd_qfreeze_count_print(regvalue, cur_col, wrap) \
@@ -993,13 +307,6 @@
#endif
#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_msg_out_print;
-#else
-#define ahd_msg_out_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "MSG_OUT", 0x137, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
ahd_reg_print_t ahd_seq_flags_print;
#else
#define ahd_seq_flags_print(regvalue, cur_col, wrap) \
@@ -1014,48 +321,6 @@
#endif
#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_qoutfifo_entry_valid_tag_print;
-#else
-#define ahd_qoutfifo_entry_valid_tag_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "QOUTFIFO_ENTRY_VALID_TAG", 0x13d, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_kernel_tqinpos_print;
-#else
-#define ahd_kernel_tqinpos_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "KERNEL_TQINPOS", 0x13e, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_qoutfifo_next_addr_print;
-#else
-#define ahd_qoutfifo_next_addr_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "QOUTFIFO_NEXT_ADDR", 0x144, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_last_msg_print;
-#else
-#define ahd_last_msg_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "LAST_MSG", 0x14a, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_scsiseq_template_print;
-#else
-#define ahd_scsiseq_template_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "SCSISEQ_TEMPLATE", 0x14b, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_initiator_tag_print;
-#else
-#define ahd_initiator_tag_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "INITIATOR_TAG", 0x14c, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
ahd_reg_print_t ahd_seq_flags2_print;
#else
#define ahd_seq_flags2_print(regvalue, cur_col, wrap) \
@@ -1063,62 +328,6 @@
#endif
#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_allocfifo_scbptr_print;
-#else
-#define ahd_allocfifo_scbptr_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "ALLOCFIFO_SCBPTR", 0x14e, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_int_coalescing_timer_print;
-#else
-#define ahd_int_coalescing_timer_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "INT_COALESCING_TIMER", 0x150, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_int_coalescing_maxcmds_print;
-#else
-#define ahd_int_coalescing_maxcmds_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "INT_COALESCING_MAXCMDS", 0x152, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_int_coalescing_mincmds_print;
-#else
-#define ahd_int_coalescing_mincmds_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "INT_COALESCING_MINCMDS", 0x153, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_cmds_pending_print;
-#else
-#define ahd_cmds_pending_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "CMDS_PENDING", 0x154, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_int_coalescing_cmdcount_print;
-#else
-#define ahd_int_coalescing_cmdcount_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "INT_COALESCING_CMDCOUNT", 0x156, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_local_hs_mailbox_print;
-#else
-#define ahd_local_hs_mailbox_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "LOCAL_HS_MAILBOX", 0x157, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_cmdsize_table_print;
-#else
-#define ahd_cmdsize_table_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "CMDSIZE_TABLE", 0x158, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
ahd_reg_print_t ahd_mk_message_scb_print;
#else
#define ahd_mk_message_scb_print(regvalue, cur_col, wrap) \
@@ -1140,27 +349,6 @@
#endif
#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_scb_residual_datacnt_print;
-#else
-#define ahd_scb_residual_datacnt_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "SCB_RESIDUAL_DATACNT", 0x180, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_scb_sense_busaddr_print;
-#else
-#define ahd_scb_sense_busaddr_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "SCB_SENSE_BUSADDR", 0x18c, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_scb_tag_print;
-#else
-#define ahd_scb_tag_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "SCB_TAG", 0x190, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
ahd_reg_print_t ahd_scb_control_print;
#else
#define ahd_scb_control_print(regvalue, cur_col, wrap) \
@@ -1174,69 +362,6 @@
ahd_print_register(NULL, 0, "SCB_SCSIID", 0x193, regvalue, cur_col, wrap)
#endif
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_scb_lun_print;
-#else
-#define ahd_scb_lun_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "SCB_LUN", 0x194, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_scb_task_attribute_print;
-#else
-#define ahd_scb_task_attribute_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "SCB_TASK_ATTRIBUTE", 0x195, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_scb_task_management_print;
-#else
-#define ahd_scb_task_management_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "SCB_TASK_MANAGEMENT", 0x197, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_scb_dataptr_print;
-#else
-#define ahd_scb_dataptr_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "SCB_DATAPTR", 0x198, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_scb_datacnt_print;
-#else
-#define ahd_scb_datacnt_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "SCB_DATACNT", 0x1a0, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_scb_sgptr_print;
-#else
-#define ahd_scb_sgptr_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "SCB_SGPTR", 0x1a4, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_scb_busaddr_print;
-#else
-#define ahd_scb_busaddr_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "SCB_BUSADDR", 0x1a8, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_scb_next2_print;
-#else
-#define ahd_scb_next2_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "SCB_NEXT2", 0x1ae, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_scb_disconnected_lists_print;
-#else
-#define ahd_scb_disconnected_lists_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "SCB_DISCONNECTED_LISTS", 0x1b8, regvalue, cur_col, wrap)
-#endif
-
#define MODE_PTR 0x00
#define DST_MODE 0x70
@@ -1292,15 +417,6 @@
#define CLRCMDINT 0x02
#define CLRSPLTINT 0x01
-#define ERROR 0x04
-#define CIOPARERR 0x80
-#define CIOACCESFAIL 0x40
-#define MPARERR 0x20
-#define DPARERR 0x10
-#define SQPARERR 0x08
-#define ILLOPCODE 0x04
-#define DSCTMOUT 0x02
-
#define CLRERR 0x04
#define CLRCIOPARERR 0x80
#define CLRCIOACCESFAIL 0x40
@@ -1310,6 +426,15 @@
#define CLRILLOPCODE 0x04
#define CLRDSCTMOUT 0x02
+#define ERROR 0x04
+#define CIOPARERR 0x80
+#define CIOACCESFAIL 0x40
+#define MPARERR 0x20
+#define DPARERR 0x10
+#define SQPARERR 0x08
+#define ILLOPCODE 0x04
+#define DSCTMOUT 0x02
+
#define HCNTRL 0x05
#define SEQ_RESET 0x80
#define POWRDN 0x40
@@ -1404,22 +529,22 @@
#define FIFOFULL 0x02
#define FIFOEMP 0x01
-#define SG_CACHE_SHADOW 0x1b
-#define ODD_SEG 0x04
-#define LAST_SEG 0x02
-#define LAST_SEG_DONE 0x01
-
#define ARBCTL 0x1b
#define RESET_HARB 0x80
#define RETRY_SWEN 0x08
#define USE_TIME 0x07
+#define SG_CACHE_SHADOW 0x1b
+#define ODD_SEG 0x04
+#define LAST_SEG 0x02
+#define LAST_SEG_DONE 0x01
+
#define SG_CACHE_PRE 0x1b
-#define LQIN 0x20
-
#define TYPEPTR 0x20
+#define LQIN 0x20
+
#define TAGPTR 0x21
#define LUNPTR 0x22
@@ -1479,14 +604,6 @@
#define SINGLECMD 0x02
#define ABORTPENDING 0x01
-#define SCSBIST0 0x39
-#define GSBISTERR 0x40
-#define GSBISTDONE 0x20
-#define GSBISTRUN 0x10
-#define OSBISTERR 0x04
-#define OSBISTDONE 0x02
-#define OSBISTRUN 0x01
-
#define LQCTL2 0x39
#define LQIRETRY 0x80
#define LQICONTINUE 0x40
@@ -1497,10 +614,13 @@
#define LQOTOIDLE 0x02
#define LQOPAUSE 0x01
-#define SCSBIST1 0x3a
-#define NTBISTERR 0x04
-#define NTBISTDONE 0x02
-#define NTBISTRUN 0x01
+#define SCSBIST0 0x39
+#define GSBISTERR 0x40
+#define GSBISTDONE 0x20
+#define GSBISTRUN 0x10
+#define OSBISTERR 0x04
+#define OSBISTDONE 0x02
+#define OSBISTRUN 0x01
#define SCSISEQ0 0x3a
#define TEMODEO 0x80
@@ -1509,8 +629,15 @@
#define FORCEBUSFREE 0x10
#define SCSIRSTO 0x01
+#define SCSBIST1 0x3a
+#define NTBISTERR 0x04
+#define NTBISTDONE 0x02
+#define NTBISTRUN 0x01
+
#define SCSISEQ1 0x3b
+#define BUSINITID 0x3c
+
#define SXFRCTL0 0x3c
#define DFON 0x80
#define DFPEXP 0x40
@@ -1519,8 +646,6 @@
#define DLCOUNT 0x3c
-#define BUSINITID 0x3c
-
#define SXFRCTL1 0x3d
#define BITBUCKET 0x80
#define ENSACHK 0x40
@@ -1545,6 +670,8 @@
#define CURRFIFO_1 0x01
#define CURRFIFO_0 0x00
+#define MULTARGID 0x40
+
#define SCSISIGO 0x40
#define CDO 0x80
#define IOO 0x40
@@ -1555,8 +682,6 @@
#define REQO 0x02
#define ACKO 0x01
-#define MULTARGID 0x40
-
#define SCSISIGI 0x41
#define ATNI 0x10
#define SELI 0x08
@@ -1603,14 +728,14 @@
#define ENAB20 0x04
#define SELWIDE 0x02
-#define CLRSINT0 0x4b
-#define CLRSELDO 0x40
-#define CLRSELDI 0x20
-#define CLRSELINGO 0x10
-#define CLRIOERR 0x08
-#define CLROVERRUN 0x04
-#define CLRSPIORDY 0x02
-#define CLRARBDO 0x01
+#define SIMODE0 0x4b
+#define ENSELDO 0x40
+#define ENSELDI 0x20
+#define ENSELINGO 0x10
+#define ENIOERR 0x08
+#define ENOVERRUN 0x04
+#define ENSPIORDY 0x02
+#define ENARBDO 0x01
#define SSTAT0 0x4b
#define TARGET 0x80
@@ -1622,23 +747,14 @@
#define SPIORDY 0x02
#define ARBDO 0x01
-#define SIMODE0 0x4b
-#define ENSELDO 0x40
-#define ENSELDI 0x20
-#define ENSELINGO 0x10
-#define ENIOERR 0x08
-#define ENOVERRUN 0x04
-#define ENSPIORDY 0x02
-#define ENARBDO 0x01
-
-#define CLRSINT1 0x4c
-#define CLRSELTIMEO 0x80
-#define CLRATNO 0x40
-#define CLRSCSIRSTI 0x20
-#define CLRBUSFREE 0x08
-#define CLRSCSIPERR 0x04
-#define CLRSTRB2FAST 0x02
-#define CLRREQINIT 0x01
+#define CLRSINT0 0x4b
+#define CLRSELDO 0x40
+#define CLRSELDI 0x20
+#define CLRSELINGO 0x10
+#define CLRIOERR 0x08
+#define CLROVERRUN 0x04
+#define CLRSPIORDY 0x02
+#define CLRARBDO 0x01
#define SSTAT1 0x4c
#define SELTO 0x80
@@ -1650,6 +766,20 @@
#define STRB2FAST 0x02
#define REQINIT 0x01
+#define CLRSINT1 0x4c
+#define CLRSELTIMEO 0x80
+#define CLRATNO 0x40
+#define CLRSCSIRSTI 0x20
+#define CLRBUSFREE 0x08
+#define CLRSCSIPERR 0x04
+#define CLRSTRB2FAST 0x02
+#define CLRREQINIT 0x01
+
+#define SIMODE2 0x4d
+#define ENWIDE_RES 0x04
+#define ENSDONE 0x02
+#define ENDMADONE 0x01
+
#define SSTAT2 0x4d
#define BUSFREETIME 0xc0
#define NONPACKREQ 0x20
@@ -1662,11 +792,6 @@
#define BUSFREE_DFF0 0x80
#define BUSFREE_LQO 0x40
-#define SIMODE2 0x4d
-#define ENWIDE_RES 0x04
-#define ENSDONE 0x02
-#define ENDMADONE 0x01
-
#define CLRSINT2 0x4d
#define CLRNONPACKREQ 0x20
#define CLRWIDE_RES 0x04
@@ -1685,10 +810,10 @@
#define LQISTATE 0x4e
-#define SOFFCNT 0x4f
-
#define LQOSTATE 0x4f
+#define SOFFCNT 0x4f
+
#define LQISTAT0 0x50
#define LQIATNQAS 0x20
#define LQICRCT1 0x10
@@ -1697,14 +822,6 @@
#define LQIATNLQ 0x02
#define LQIATNCMD 0x01
-#define CLRLQIINT0 0x50
-#define CLRLQIATNQAS 0x20
-#define CLRLQICRCT1 0x10
-#define CLRLQICRCT2 0x08
-#define CLRLQIBADLQT 0x04
-#define CLRLQIATNLQ 0x02
-#define CLRLQIATNCMD 0x01
-
#define LQIMODE0 0x50
#define ENLQIATNQASK 0x20
#define ENLQICRCT1 0x10
@@ -1713,6 +830,14 @@
#define ENLQIATNLQ 0x02
#define ENLQIATNCMD 0x01
+#define CLRLQIINT0 0x50
+#define CLRLQIATNQAS 0x20
+#define CLRLQICRCT1 0x10
+#define CLRLQICRCT2 0x08
+#define CLRLQIBADLQT 0x04
+#define CLRLQIATNLQ 0x02
+#define CLRLQIATNCMD 0x01
+
#define LQIMODE1 0x51
#define ENLQIPHASE_LQ 0x80
#define ENLQIPHASE_NLQ 0x40
@@ -1753,25 +878,18 @@
#define LQISTOPCMD 0x02
#define LQIGSAVAIL 0x01
-#define SSTAT3 0x53
-#define NTRAMPERR 0x02
-#define OSRAMPERR 0x01
-
#define SIMODE3 0x53
#define ENNTRAMPERR 0x02
#define ENOSRAMPERR 0x01
+#define SSTAT3 0x53
+#define NTRAMPERR 0x02
+#define OSRAMPERR 0x01
+
#define CLRSINT3 0x53
#define CLRNTRAMPERR 0x02
#define CLROSRAMPERR 0x01
-#define LQOSTAT0 0x54
-#define LQOTARGSCBPERR 0x10
-#define LQOSTOPT2 0x08
-#define LQOATNLQ 0x04
-#define LQOATNPKT 0x02
-#define LQOTCRC 0x01
-
#define CLRLQOINT0 0x54
#define CLRLQOTARGSCBPERR 0x10
#define CLRLQOSTOPT2 0x08
@@ -1779,6 +897,13 @@
#define CLRLQOATNPKT 0x02
#define CLRLQOTCRC 0x01
+#define LQOSTAT0 0x54
+#define LQOTARGSCBPERR 0x10
+#define LQOSTOPT2 0x08
+#define LQOATNLQ 0x04
+#define LQOATNPKT 0x02
+#define LQOTCRC 0x01
+
#define LQOMODE0 0x54
#define ENLQOTARGSCBPERR 0x10
#define ENLQOSTOPT2 0x08
@@ -1793,13 +918,6 @@
#define ENLQOBUSFREE 0x02
#define ENLQOPHACHGINPKT 0x01
-#define LQOSTAT1 0x55
-#define LQOINITSCBPERR 0x10
-#define LQOSTOPI2 0x08
-#define LQOBADQAS 0x04
-#define LQOBUSFREE 0x02
-#define LQOPHACHGINPKT 0x01
-
#define CLRLQOINT1 0x55
#define CLRLQOINITSCBPERR 0x10
#define CLRLQOSTOPI2 0x08
@@ -1807,6 +925,13 @@
#define CLRLQOBUSFREE 0x02
#define CLRLQOPHACHGINPKT 0x01
+#define LQOSTAT1 0x55
+#define LQOINITSCBPERR 0x10
+#define LQOSTOPI2 0x08
+#define LQOBADQAS 0x04
+#define LQOBUSFREE 0x02
+#define LQOPHACHGINPKT 0x01
+
#define LQOSTAT2 0x56
#define LQOPKT 0xe0
#define LQOWAITFIFO 0x10
@@ -1859,8 +984,6 @@
#define CFG4ICMD 0x02
#define CFG4TCMD 0x01
-#define CURRSCB 0x5c
-
#define SEQIMODE 0x5c
#define ENCTXTDONE 0x40
#define ENSAVEPTRS 0x20
@@ -1870,6 +993,11 @@
#define ENCFG4ICMD 0x02
#define ENCFG4TCMD 0x01
+#define CURRSCB 0x5c
+
+#define CRCCONTROL 0x5d
+#define CRCVALCHKEN 0x40
+
#define MDFFSTAT 0x5d
#define SHCNTNEGATIVE 0x40
#define SHCNTMINUS1 0x20
@@ -1879,34 +1007,31 @@
#define DATAINFIFO 0x02
#define FIFOFREE 0x01
-#define CRCCONTROL 0x5d
-#define CRCVALCHKEN 0x40
-
#define DFFTAG 0x5e
-#define LASTSCB 0x5e
-
#define SCSITEST 0x5e
#define CNTRTEST 0x08
#define SEL_TXPLL_DEBUG 0x04
+#define LASTSCB 0x5e
+
#define IOPDNCTL 0x5f
#define DISABLE_OE 0x80
#define PDN_IDIST 0x04
#define PDN_DIFFSENSE 0x01
-#define SHADDR 0x60
+#define DGRPCRCI 0x60
#define NEGOADDR 0x60
-#define DGRPCRCI 0x60
+#define SHADDR 0x60
#define NEGPERIOD 0x61
-#define PACKCRCI 0x62
-
#define NEGOFFSET 0x62
+#define PACKCRCI 0x62
+
#define NEGPPROPTS 0x63
#define PPROPT_PACE 0x08
#define PPROPT_QAS 0x04
@@ -1942,16 +1067,18 @@
#define SHCNT 0x68
-#define TOWNID 0x69
-
#define PLL960CTL1 0x69
+#define TOWNID 0x69
+
#define PLL960CNT0 0x6a
#define XSIG 0x6a
#define SELOID 0x6b
+#define FAIRNESS 0x6c
+
#define PLL400CTL0 0x6c
#define PLL_VCOSEL 0x80
#define PLL_PWDN 0x40
@@ -1961,8 +1088,6 @@
#define PLL_DLPF 0x02
#define PLL_ENFBM 0x01
-#define FAIRNESS 0x6c
-
#define PLL400CTL1 0x6d
#define PLL_CNTEN 0x80
#define PLL_CNTCLR 0x40
@@ -1974,25 +1099,25 @@
#define HADDR 0x70
+#define HODMAADR 0x70
+
#define PLLDELAY 0x70
#define SPLIT_DROP_REQ 0x80
-#define HODMAADR 0x70
+#define HCNT 0x78
#define HODMACNT 0x78
-#define HCNT 0x78
-
#define HODMAEN 0x7a
-#define SCBHADDR 0x7c
-
#define SGHADDR 0x7c
-#define SCBHCNT 0x84
+#define SCBHADDR 0x7c
#define SGHCNT 0x84
+#define SCBHCNT 0x84
+
#define DFF_THRSH 0x88
#define WR_DFTHRSH 0x70
#define RD_DFTHRSH 0x07
@@ -2025,6 +1150,10 @@
#define CMCRXMSG0 0x90
+#define OVLYRXMSG0 0x90
+
+#define DCHRXMSG0 0x90
+
#define ROENABLE 0x90
#define MSIROEN 0x20
#define OVLYROEN 0x10
@@ -2033,12 +1162,12 @@
#define DCH1ROEN 0x02
#define DCH0ROEN 0x01
-#define OVLYRXMSG0 0x90
-
-#define DCHRXMSG0 0x90
-
#define OVLYRXMSG1 0x91
+#define CMCRXMSG1 0x91
+
+#define DCHRXMSG1 0x91
+
#define NSENABLE 0x91
#define MSINSEN 0x20
#define OVLYNSEN 0x10
@@ -2047,10 +1176,6 @@
#define DCH1NSEN 0x02
#define DCH0NSEN 0x01
-#define CMCRXMSG1 0x91
-
-#define DCHRXMSG1 0x91
-
#define DCHRXMSG2 0x92
#define CMCRXMSG2 0x92
@@ -2074,24 +1199,24 @@
#define TSCSERREN 0x02
#define CMPABCDIS 0x01
+#define CMCSEQBCNT 0x94
+
#define OVLYSEQBCNT 0x94
#define DCHSEQBCNT 0x94
-#define CMCSEQBCNT 0x94
-
-#define CMCSPLTSTAT0 0x96
-
#define DCHSPLTSTAT0 0x96
#define OVLYSPLTSTAT0 0x96
-#define CMCSPLTSTAT1 0x97
+#define CMCSPLTSTAT0 0x96
#define OVLYSPLTSTAT1 0x97
#define DCHSPLTSTAT1 0x97
+#define CMCSPLTSTAT1 0x97
+
#define SGRXMSG0 0x98
#define CDNUM 0xf8
#define CFNUM 0x07
@@ -2119,18 +1244,15 @@
#define TAG_NUM 0x1f
#define RLXORD 0x10
-#define SGSEQBCNT 0x9c
-
#define SLVSPLTOUTATTR0 0x9c
#define LOWER_BCNT 0xff
+#define SGSEQBCNT 0x9c
+
#define SLVSPLTOUTATTR1 0x9d
#define CMPLT_DNUM 0xf8
#define CMPLT_FNUM 0x07
-#define SLVSPLTOUTATTR2 0x9e
-#define CMPLT_BNUM 0xff
-
#define SGSPLTSTAT0 0x9e
#define STAETERM 0x80
#define SCBCERR 0x40
@@ -2141,6 +1263,9 @@
#define RXSCEMSG 0x02
#define RXSPLTRSP 0x01
+#define SLVSPLTOUTATTR2 0x9e
+#define CMPLT_BNUM 0xff
+
#define SGSPLTSTAT1 0x9f
#define RXDATABUCKET 0x01
@@ -2177,14 +1302,14 @@
#define CLRPENDMSI 0x08
#define DPR 0x01
+#define DATA_COUNT_ODD 0xa7
+
#define TARGPCISTAT 0xa7
#define DPE 0x80
#define SSE 0x40
#define STA 0x08
#define TWATERR 0x02
-#define DATA_COUNT_ODD 0xa7
-
#define SCBPTR 0xa8
#define CCSCBACNT 0xab
@@ -2196,10 +1321,10 @@
#define CCSGADDR 0xac
-#define CCSCBADR_BK 0xac
-
#define CCSCBADDR 0xac
+#define CCSCBADR_BK 0xac
+
#define CMC_RAMBIST 0xad
#define SG_ELEMENT_SIZE 0x80
#define SCBRAMBIST_FAIL 0x40
@@ -2253,9 +1378,9 @@
#define SEEDAT 0xbc
#define SEECTL 0xbe
+#define SEEOP_EWDS 0x40
#define SEEOP_WALL 0x40
#define SEEOP_EWEN 0x40
-#define SEEOP_EWDS 0x40
#define SEEOPCODE 0x70
#define SEERST 0x02
#define SEESTART 0x01
@@ -2272,25 +1397,25 @@
#define SCBCNT 0xbf
-#define DFWADDR 0xc0
-
#define DSPFLTRCTL 0xc0
#define FLTRDISABLE 0x20
#define EDGESENSE 0x10
#define DSPFCNTSEL 0x0f
+#define DFWADDR 0xc0
+
#define DSPDATACTL 0xc1
#define BYPASSENAB 0x80
#define DESQDIS 0x10
#define RCVROFFSTDIS 0x04
#define XMITOFFSTDIS 0x02
-#define DFRADDR 0xc2
-
#define DSPREQCTL 0xc2
#define MANREQCTL 0xc0
#define MANREQDLY 0x3f
+#define DFRADDR 0xc2
+
#define DSPACKCTL 0xc3
#define MANACKCTL 0xc0
#define MANACKDLY 0x3f
@@ -2311,14 +1436,14 @@
#define WRTBIASCALC 0xc7
-#define RCVRBIASCALC 0xc8
-
#define DFPTRS 0xc8
-#define SKEWCALC 0xc9
+#define RCVRBIASCALC 0xc8
#define DFBKPTR 0xc9
+#define SKEWCALC 0xc9
+
#define DFDBCTL 0xcb
#define DFF_CIO_WR_RDY 0x20
#define DFF_CIO_RD_RDY 0x10
@@ -2403,12 +1528,12 @@
#define ACCUM_SAVE 0xfa
-#define WAITING_SCB_TAILS 0x100
-
#define AHD_PCI_CONFIG_BASE 0x100
#define SRAM_BASE 0x100
+#define WAITING_SCB_TAILS 0x100
+
#define WAITING_TID_HEAD 0x120
#define WAITING_TID_TAIL 0x122
@@ -2437,8 +1562,8 @@
#define PRELOADEN 0x80
#define WIDEODD 0x40
#define SCSIEN 0x20
-#define SDMAEN 0x10
#define SDMAENACK 0x10
+#define SDMAEN 0x10
#define HDMAEN 0x08
#define HDMAENACK 0x08
#define DIRECTION 0x04
@@ -2536,12 +1661,12 @@
#define MK_MESSAGE_SCSIID 0x162
-#define SCB_BASE 0x180
-
#define SCB_RESIDUAL_DATACNT 0x180
#define SCB_CDB_STORE 0x180
#define SCB_HOST_CDB_PTR 0x180
+#define SCB_BASE 0x180
+
#define SCB_RESIDUAL_SGPTR 0x184
#define SG_ADDR_MASK 0xf8
#define SG_OVERRUN_RESID 0x02
@@ -2609,77 +1734,77 @@
#define SCB_DISCONNECTED_LISTS 0x1b8
+#define STIMESEL_SHIFT 0x03
+#define STIMESEL_MIN 0x18
+#define INVALID_ADDR 0x80
+#define CMD_GROUP_CODE_SHIFT 0x05
+#define AHD_PRECOMP_MASK 0x07
+#define TARGET_DATA_IN 0x01
+#define SEEOP_EWEN_ADDR 0xc0
+#define NUMDSPS 0x14
+#define DST_MODE_SHIFT 0x04
+#define CCSCBADDR_MAX 0x80
+#define AHD_ANNEXCOL_PER_DEV0 0x04
+#define TARGET_CMD_CMPLT 0xfe
+#define SEEOP_WRAL_ADDR 0x40
+#define BUS_8_BIT 0x00
#define AHD_TIMER_MAX_US 0x18ffe7
#define AHD_TIMER_MAX_TICKS 0xffff
#define AHD_SENSE_BUFSIZE 0x100
-#define BUS_8_BIT 0x00
-#define TARGET_CMD_CMPLT 0xfe
-#define SEEOP_WRAL_ADDR 0x40
-#define AHD_AMPLITUDE_DEF 0x07
-#define AHD_PRECOMP_CUTBACK_37 0x07
#define AHD_PRECOMP_SHIFT 0x00
+#define AHD_PRECOMP_CUTBACK_37 0x07
#define AHD_ANNEXCOL_PRECOMP_SLEW 0x04
-#define AHD_TIMER_US_PER_TICK 0x19
-#define SCB_TRANSFER_SIZE_FULL_LUN 0x38
+#define AHD_AMPLITUDE_DEF 0x07
+#define WRTBIASCTL_HP_DEFAULT 0x00
+#define TID_SHIFT 0x04
#define STATUS_QUEUE_FULL 0x28
#define STATUS_BUSY 0x08
-#define MAX_OFFSET_NON_PACED 0x7f
-#define MAX_OFFSET_PACED 0xfe
-#define BUS_32_BIT 0x02
-#define CCSGADDR_MAX 0x80
-#define TID_SHIFT 0x04
-#define MK_MESSAGE_BIT_OFFSET 0x04
-#define WRTBIASCTL_HP_DEFAULT 0x00
#define SEEOP_EWDS_ADDR 0x00
-#define AHD_AMPLITUDE_SHIFT 0x00
-#define AHD_AMPLITUDE_MASK 0x07
-#define AHD_ANNEXCOL_AMPLITUDE 0x06
-#define AHD_SLEWRATE_DEF_REVA 0x08
+#define SCB_TRANSFER_SIZE_FULL_LUN 0x38
+#define MK_MESSAGE_BIT_OFFSET 0x04
+#define MAX_OFFSET_PACED 0xfe
+#define MAX_OFFSET_NON_PACED 0x7f
+#define LUNLEN_SINGLE_LEVEL_LUN 0x0f
+#define CCSGADDR_MAX 0x80
+#define B_CURRFIFO_0 0x02
+#define BUS_32_BIT 0x02
+#define AHD_TIMER_US_PER_TICK 0x19
#define AHD_SLEWRATE_SHIFT 0x03
#define AHD_SLEWRATE_MASK 0x78
+#define AHD_SLEWRATE_DEF_REVA 0x08
#define AHD_PRECOMP_CUTBACK_29 0x06
#define AHD_NUM_PER_DEV_ANNEXCOLS 0x04
-#define B_CURRFIFO_0 0x02
-#define LUNLEN_SINGLE_LEVEL_LUN 0x0f
-#define NVRAM_SCB_OFFSET 0x2c
-#define STATUS_PKT_SENSE 0xff
-#define CMD_GROUP_CODE_SHIFT 0x05
-#define MAX_OFFSET_PACED_BUG 0x7f
+#define AHD_ANNEXCOL_AMPLITUDE 0x06
+#define AHD_AMPLITUDE_SHIFT 0x00
+#define AHD_AMPLITUDE_MASK 0x07
#define STIMESEL_BUG_ADJ 0x08
-#define STIMESEL_MIN 0x18
-#define STIMESEL_SHIFT 0x03
-#define CCSGRAM_MAXSEGS 0x10
-#define INVALID_ADDR 0x80
+#define STATUS_PKT_SENSE 0xff
+#define SRC_MODE_SHIFT 0x00
#define SEEOP_ERAL_ADDR 0x80
+#define NVRAM_SCB_OFFSET 0x2c
+#define MAX_OFFSET_PACED_BUG 0x7f
+#define CCSGRAM_MAXSEGS 0x10
#define AHD_SLEWRATE_DEF_REVB 0x08
#define AHD_PRECOMP_CUTBACK_17 0x04
-#define AHD_PRECOMP_MASK 0x07
-#define SRC_MODE_SHIFT 0x00
-#define PKT_OVERRUN_BUFSIZE 0x200
#define SCB_TRANSFER_SIZE_1BYTE_LUN 0x30
-#define TARGET_DATA_IN 0x01
-#define HOST_MSG 0xff
+#define PKT_OVERRUN_BUFSIZE 0x200
#define MAX_OFFSET 0xfe
+#define HOST_MSG 0xff
#define BUS_16_BIT 0x01
-#define CCSCBADDR_MAX 0x80
-#define NUMDSPS 0x14
-#define SEEOP_EWEN_ADDR 0xc0
-#define AHD_ANNEXCOL_PER_DEV0 0x04
-#define DST_MODE_SHIFT 0x04
/* Downloaded Constant Definitions */
+#define SG_SIZEOF 0x04
+#define SG_PREFETCH_ALIGN_MASK 0x02
+#define SG_PREFETCH_CNT_LIMIT 0x01
#define CACHELINE_MASK 0x07
#define SCB_TRANSFER_SIZE 0x06
#define PKT_OVERRUN_BUFOFFSET 0x05
-#define SG_SIZEOF 0x04
#define SG_PREFETCH_ADDR_MASK 0x03
-#define SG_PREFETCH_ALIGN_MASK 0x02
-#define SG_PREFETCH_CNT_LIMIT 0x01
#define SG_PREFETCH_CNT 0x00
#define DOWNLOAD_CONST_COUNT 0x08
/* Exported Labels */
-#define LABEL_seq_isr 0x28f
#define LABEL_timer_isr 0x28b
+#define LABEL_seq_isr 0x28f
diff --git a/drivers/scsi/aic7xxx/aic79xx_reg_print.c_shipped b/drivers/scsi/aic7xxx/aic79xx_reg_print.c_shipped
index f5ea715..2e0c589 100644
--- a/drivers/scsi/aic7xxx/aic79xx_reg_print.c_shipped
+++ b/drivers/scsi/aic7xxx/aic79xx_reg_print.c_shipped
@@ -234,6 +234,23 @@
0x49, regvalue, cur_col, wrap));
}
+static const ahd_reg_parse_entry_t SIMODE0_parse_table[] = {
+ { "ENARBDO", 0x01, 0x01 },
+ { "ENSPIORDY", 0x02, 0x02 },
+ { "ENOVERRUN", 0x04, 0x04 },
+ { "ENIOERR", 0x08, 0x08 },
+ { "ENSELINGO", 0x10, 0x10 },
+ { "ENSELDI", 0x20, 0x20 },
+ { "ENSELDO", 0x40, 0x40 }
+};
+
+int
+ahd_simode0_print(u_int regvalue, u_int *cur_col, u_int wrap)
+{
+ return (ahd_print_register(SIMODE0_parse_table, 7, "SIMODE0",
+ 0x4b, regvalue, cur_col, wrap));
+}
+
static const ahd_reg_parse_entry_t SSTAT0_parse_table[] = {
{ "ARBDO", 0x01, 0x01 },
{ "SPIORDY", 0x02, 0x02 },
@@ -252,23 +269,6 @@
0x4b, regvalue, cur_col, wrap));
}
-static const ahd_reg_parse_entry_t SIMODE0_parse_table[] = {
- { "ENARBDO", 0x01, 0x01 },
- { "ENSPIORDY", 0x02, 0x02 },
- { "ENOVERRUN", 0x04, 0x04 },
- { "ENIOERR", 0x08, 0x08 },
- { "ENSELINGO", 0x10, 0x10 },
- { "ENSELDI", 0x20, 0x20 },
- { "ENSELDO", 0x40, 0x40 }
-};
-
-int
-ahd_simode0_print(u_int regvalue, u_int *cur_col, u_int wrap)
-{
- return (ahd_print_register(SIMODE0_parse_table, 7, "SIMODE0",
- 0x4b, regvalue, cur_col, wrap));
-}
-
static const ahd_reg_parse_entry_t SSTAT1_parse_table[] = {
{ "REQINIT", 0x01, 0x01 },
{ "STRB2FAST", 0x02, 0x02 },
diff --git a/drivers/scsi/aic7xxx/aic7xxx_core.c b/drivers/scsi/aic7xxx/aic7xxx_core.c
index 64ab9ea..3818461 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_core.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_core.c
@@ -7340,7 +7340,6 @@
printk("\n");
}
- ahc_platform_dump_card_state(ahc);
printk("\n<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>\n");
ahc_outb(ahc, SCBPTR, saved_scbptr);
if (paused == 0)
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c
index fc6a831..acd687f 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c
@@ -2329,11 +2329,6 @@
return (retval);
}
-void
-ahc_platform_dump_card_state(struct ahc_softc *ahc)
-{
-}
-
static void ahc_linux_set_width(struct scsi_target *starget, int width)
{
struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.h b/drivers/scsi/aic7xxx/aic7xxx_osm.h
index 54c7028..f848907 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm.h
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm.h
@@ -688,7 +688,6 @@
void ahc_send_async(struct ahc_softc *, char channel,
u_int target, u_int lun, ac_code);
void ahc_print_path(struct ahc_softc *, struct scb *);
-void ahc_platform_dump_card_state(struct ahc_softc *ahc);
#ifdef CONFIG_PCI
#define AHC_PCI_CONFIG 1
diff --git a/drivers/scsi/aic7xxx/aic7xxx_reg.h_shipped b/drivers/scsi/aic7xxx/aic7xxx_reg.h_shipped
index e821082..473039d 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_reg.h_shipped
+++ b/drivers/scsi/aic7xxx/aic7xxx_reg.h_shipped
@@ -244,8 +244,6 @@
#define SCSIDATH 0x07
-#define STCNT 0x08
-
#define OPTIONMODE 0x08
#define OPTIONMODE_DEFAULTS 0x03
#define AUTORATEEN 0x80
@@ -257,6 +255,8 @@
#define AUTO_MSGOUT_DE 0x02
#define DIS_MSGIN_DUALEDGE 0x01
+#define STCNT 0x08
+
#define TARGCRCCNT 0x0a
#define CLRSINT0 0x0b
@@ -365,8 +365,6 @@
#define ALTSTIM 0x20
#define DFLTTID 0x10
-#define TARGID 0x1b
-
#define SPIOCAP 0x1b
#define SOFT1 0x80
#define SOFT0 0x40
@@ -377,12 +375,14 @@
#define ROM 0x02
#define SSPIOCPS 0x01
+#define TARGID 0x1b
+
#define BRDCTL 0x1d
#define BRDDAT7 0x80
#define BRDDAT6 0x40
#define BRDDAT5 0x20
-#define BRDDAT4 0x10
#define BRDSTB 0x10
+#define BRDDAT4 0x10
#define BRDDAT3 0x08
#define BRDCS 0x08
#define BRDDAT2 0x04
@@ -406,8 +406,8 @@
#define DIAGLEDEN 0x80
#define DIAGLEDON 0x40
#define AUTOFLUSHDIS 0x20
-#define ENAB40 0x08
#define SELBUSB 0x08
+#define ENAB40 0x08
#define ENAB20 0x04
#define SELWIDE 0x02
#define XCVR 0x01
@@ -730,8 +730,8 @@
#define SCB_BASE 0xa0
#define SCB_CDB_PTR 0xa0
-#define SCB_RESIDUAL_DATACNT 0xa0
#define SCB_CDB_STORE 0xa0
+#define SCB_RESIDUAL_DATACNT 0xa0
#define SCB_RESIDUAL_SGPTR 0xa4
@@ -756,8 +756,8 @@
#define SCB_CONTROL 0xb8
#define SCB_TAG_TYPE 0x03
-#define STATUS_RCVD 0x80
#define TARGET_SCB 0x80
+#define STATUS_RCVD 0x80
#define DISCENB 0x40
#define TAG_ENB 0x20
#define MK_MESSAGE 0x10
@@ -872,40 +872,40 @@
#define SG_CACHE_PRE 0xfc
+#define TARGET_CMD_CMPLT 0xfe
#define MAX_OFFSET_ULTRA2 0x7f
#define MAX_OFFSET_16BIT 0x08
#define BUS_8_BIT 0x00
-#define TARGET_CMD_CMPLT 0xfe
+#define TID_SHIFT 0x04
#define STATUS_QUEUE_FULL 0x28
#define STATUS_BUSY 0x08
-#define MAX_OFFSET_8BIT 0x0f
-#define BUS_32_BIT 0x02
-#define CCSGADDR_MAX 0x80
-#define TID_SHIFT 0x04
#define SCB_DOWNLOAD_SIZE_64 0x30
+#define MAX_OFFSET_8BIT 0x0f
#define HOST_MAILBOX_SHIFT 0x04
+#define CCSGADDR_MAX 0x80
+#define BUS_32_BIT 0x02
+#define SG_SIZEOF 0x08
+#define SEQ_MAILBOX_SHIFT 0x00
+#define SCB_LIST_NULL 0xff
+#define SCB_DOWNLOAD_SIZE 0x20
#define CMD_GROUP_CODE_SHIFT 0x05
#define CCSGRAM_MAXSEGS 0x10
-#define SCB_LIST_NULL 0xff
-#define SG_SIZEOF 0x08
-#define SCB_DOWNLOAD_SIZE 0x20
-#define SEQ_MAILBOX_SHIFT 0x00
#define TARGET_DATA_IN 0x01
-#define HOST_MSG 0xff
-#define MAX_OFFSET 0x7f
-#define BUS_16_BIT 0x01
-#define SCB_UPLOAD_SIZE 0x20
#define STACK_SIZE 0x04
+#define SCB_UPLOAD_SIZE 0x20
+#define MAX_OFFSET 0x7f
+#define HOST_MSG 0xff
+#define BUS_16_BIT 0x01
/* Downloaded Constant Definitions */
#define INVERTED_CACHESIZE_MASK 0x03
-#define SG_PREFETCH_ADDR_MASK 0x06
#define SG_PREFETCH_ALIGN_MASK 0x05
+#define SG_PREFETCH_ADDR_MASK 0x06
#define QOUTFIFO_OFFSET 0x00
#define SG_PREFETCH_CNT 0x04
-#define CACHESIZE_MASK 0x02
#define QINFIFO_OFFSET 0x01
+#define CACHESIZE_MASK 0x02
#define DOWNLOAD_CONST_COUNT 0x07
diff --git a/drivers/scsi/aic94xx/aic94xx_init.c b/drivers/scsi/aic94xx/aic94xx_init.c
index a14ba7a..6c83886 100644
--- a/drivers/scsi/aic94xx/aic94xx_init.c
+++ b/drivers/scsi/aic94xx/aic94xx_init.c
@@ -70,7 +70,7 @@
.max_sectors = SCSI_DEFAULT_MAX_SECTORS,
.use_clustering = ENABLE_CLUSTERING,
.eh_device_reset_handler = sas_eh_device_reset_handler,
- .eh_bus_reset_handler = sas_eh_bus_reset_handler,
+ .eh_target_reset_handler = sas_eh_target_reset_handler,
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
.track_queue_depth = 1,
@@ -956,11 +956,11 @@
return 1;
}
-static ssize_t asd_version_show(struct device_driver *driver, char *buf)
+static ssize_t version_show(struct device_driver *driver, char *buf)
{
return snprintf(buf, PAGE_SIZE, "%s\n", ASD_DRIVER_VERSION);
}
-static DRIVER_ATTR(version, S_IRUGO, asd_version_show, NULL);
+static DRIVER_ATTR_RO(version);
static int asd_create_driver_attrs(struct device_driver *driver)
{
diff --git a/drivers/scsi/arcmsr/arcmsr_attr.c b/drivers/scsi/arcmsr/arcmsr_attr.c
index 9c86481..259d9c2 100644
--- a/drivers/scsi/arcmsr/arcmsr_attr.c
+++ b/drivers/scsi/arcmsr/arcmsr_attr.c
@@ -190,7 +190,7 @@
return 1;
}
-static struct bin_attribute arcmsr_sysfs_message_read_attr = {
+static const struct bin_attribute arcmsr_sysfs_message_read_attr = {
.attr = {
.name = "mu_read",
.mode = S_IRUSR ,
@@ -199,7 +199,7 @@
.read = arcmsr_sysfs_iop_message_read,
};
-static struct bin_attribute arcmsr_sysfs_message_write_attr = {
+static const struct bin_attribute arcmsr_sysfs_message_write_attr = {
.attr = {
.name = "mu_write",
.mode = S_IWUSR,
@@ -208,7 +208,7 @@
.write = arcmsr_sysfs_iop_message_write,
};
-static struct bin_attribute arcmsr_sysfs_message_clear_attr = {
+static const struct bin_attribute arcmsr_sysfs_message_clear_attr = {
.attr = {
.name = "mu_clear",
.mode = S_IWUSR,
diff --git a/drivers/scsi/arm/acornscsi.c b/drivers/scsi/arm/acornscsi.c
index 12b8829..690816f 100644
--- a/drivers/scsi/arm/acornscsi.c
+++ b/drivers/scsi/arm/acornscsi.c
@@ -2725,23 +2725,24 @@
* Params : SCpnt - command causing reset
* Returns : one of SCSI_RESET_ macros
*/
-int acornscsi_bus_reset(struct scsi_cmnd *SCpnt)
+int acornscsi_host_reset(struct Scsi_Host *shpnt)
{
- AS_Host *host = (AS_Host *)SCpnt->device->host->hostdata;
+ AS_Host *host = (AS_Host *)shpnt->hostdata;
struct scsi_cmnd *SCptr;
host->stats.resets += 1;
#if (DEBUG & DEBUG_RESET)
{
- int asr, ssr;
+ int asr, ssr, devidx;
asr = sbic_arm_read(host, SBIC_ASR);
ssr = sbic_arm_read(host, SBIC_SSR);
printk(KERN_WARNING "acornscsi_reset: ");
print_sbic_status(asr, ssr, host->scsi.phase);
- acornscsi_dumplog(host, SCpnt->device->id);
+ for (devidx = 0; devidx < 9; devidx ++) {
+ acornscsi_dumplog(host, devidx);
}
#endif
@@ -2884,7 +2885,7 @@
.info = acornscsi_info,
.queuecommand = acornscsi_queuecmd,
.eh_abort_handler = acornscsi_abort,
- .eh_bus_reset_handler = acornscsi_bus_reset,
+ .eh_host_reset_handler = acornscsi_host_reset,
.can_queue = 16,
.this_id = 7,
.sg_tablesize = SG_ALL,
diff --git a/drivers/scsi/arm/cumana_1.c b/drivers/scsi/arm/cumana_1.c
index a87b99c..ae1d809 100644
--- a/drivers/scsi/arm/cumana_1.c
+++ b/drivers/scsi/arm/cumana_1.c
@@ -216,7 +216,7 @@
.info = cumanascsi_info,
.queuecommand = cumanascsi_queue_command,
.eh_abort_handler = NCR5380_abort,
- .eh_bus_reset_handler = NCR5380_bus_reset,
+ .eh_host_reset_handler = NCR5380_host_reset,
.can_queue = 16,
.this_id = 7,
.sg_tablesize = SG_ALL,
diff --git a/drivers/scsi/arm/oak.c b/drivers/scsi/arm/oak.c
index 6be6666..05b7f75 100644
--- a/drivers/scsi/arm/oak.c
+++ b/drivers/scsi/arm/oak.c
@@ -105,7 +105,7 @@
.info = oakscsi_info,
.queuecommand = oakscsi_queue_command,
.eh_abort_handler = NCR5380_abort,
- .eh_bus_reset_handler = NCR5380_bus_reset,
+ .eh_host_reset_handler = NCR5380_host_reset,
.can_queue = 16,
.this_id = 7,
.sg_tablesize = SG_ALL,
diff --git a/drivers/scsi/atari_scsi.c b/drivers/scsi/atari_scsi.c
index a75feeb..89f5154 100644
--- a/drivers/scsi/atari_scsi.c
+++ b/drivers/scsi/atari_scsi.c
@@ -671,7 +671,7 @@
#include "NCR5380.c"
-static int atari_scsi_bus_reset(struct scsi_cmnd *cmd)
+static int atari_scsi_host_reset(struct scsi_cmnd *cmd)
{
int rv;
unsigned long flags;
@@ -688,7 +688,7 @@
atari_dma_orig_addr = NULL;
}
- rv = NCR5380_bus_reset(cmd);
+ rv = NCR5380_host_reset(cmd);
/* The 5380 raises its IRQ line while _RST is active but the ST DMA
* "lock" has been released so this interrupt may end up handled by
@@ -711,7 +711,7 @@
.info = atari_scsi_info,
.queuecommand = atari_scsi_queue_command,
.eh_abort_handler = atari_scsi_abort,
- .eh_bus_reset_handler = atari_scsi_bus_reset,
+ .eh_host_reset_handler = atari_scsi_host_reset,
.this_id = 7,
.cmd_per_lun = 2,
.use_clustering = DISABLE_CLUSTERING,
diff --git a/drivers/scsi/be2iscsi/be_iscsi.c b/drivers/scsi/be2iscsi/be_iscsi.c
index 97dca46..43a80ce 100644
--- a/drivers/scsi/be2iscsi/be_iscsi.c
+++ b/drivers/scsi/be2iscsi/be_iscsi.c
@@ -82,8 +82,8 @@
return NULL;
sess = cls_session->dd_data;
beiscsi_sess = sess->dd_data;
- beiscsi_sess->bhs_pool = pci_pool_create("beiscsi_bhs_pool",
- phba->pcidev,
+ beiscsi_sess->bhs_pool = dma_pool_create("beiscsi_bhs_pool",
+ &phba->pcidev->dev,
sizeof(struct be_cmd_bhs),
64, 0);
if (!beiscsi_sess->bhs_pool)
@@ -108,7 +108,7 @@
struct beiscsi_session *beiscsi_sess = sess->dd_data;
printk(KERN_INFO "In beiscsi_session_destroy\n");
- pci_pool_destroy(beiscsi_sess->bhs_pool);
+ dma_pool_destroy(beiscsi_sess->bhs_pool);
iscsi_session_teardown(cls_session);
}
diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c
index f862332..b4542e7 100644
--- a/drivers/scsi/be2iscsi/be_main.c
+++ b/drivers/scsi/be2iscsi/be_main.c
@@ -4257,7 +4257,7 @@
pwrb_context = &phwi_ctrlr->wrb_context[cri_index];
if (io_task->cmd_bhs) {
- pci_pool_free(beiscsi_sess->bhs_pool, io_task->cmd_bhs,
+ dma_pool_free(beiscsi_sess->bhs_pool, io_task->cmd_bhs,
io_task->bhs_pa.u.a64.address);
io_task->cmd_bhs = NULL;
task->hdr = NULL;
@@ -4374,7 +4374,7 @@
struct beiscsi_session *beiscsi_sess = beiscsi_conn->beiscsi_sess;
dma_addr_t paddr;
- io_task->cmd_bhs = pci_pool_alloc(beiscsi_sess->bhs_pool,
+ io_task->cmd_bhs = dma_pool_alloc(beiscsi_sess->bhs_pool,
GFP_ATOMIC, &paddr);
if (!io_task->cmd_bhs)
return -ENOMEM;
@@ -4501,7 +4501,7 @@
if (io_task->pwrb_handle)
free_wrb_handle(phba, pwrb_context, io_task->pwrb_handle);
io_task->pwrb_handle = NULL;
- pci_pool_free(beiscsi_sess->bhs_pool, io_task->cmd_bhs,
+ dma_pool_free(beiscsi_sess->bhs_pool, io_task->cmd_bhs,
io_task->bhs_pa.u.a64.address);
io_task->cmd_bhs = NULL;
return -ENOMEM;
diff --git a/drivers/scsi/be2iscsi/be_main.h b/drivers/scsi/be2iscsi/be_main.h
index 338dbe0..81ce3ff 100644
--- a/drivers/scsi/be2iscsi/be_main.h
+++ b/drivers/scsi/be2iscsi/be_main.h
@@ -438,7 +438,7 @@
test_bit(BEISCSI_HBA_ONLINE, &phba->state))
struct beiscsi_session {
- struct pci_pool *bhs_pool;
+ struct dma_pool *bhs_pool;
};
/**
diff --git a/drivers/scsi/bfa/bfad_im.c b/drivers/scsi/bfa/bfad_im.c
index 7eb0eef..24e657a 100644
--- a/drivers/scsi/bfa/bfad_im.c
+++ b/drivers/scsi/bfa/bfad_im.c
@@ -373,32 +373,28 @@
}
/*
- * Scsi_Host template entry, resets the bus and abort all commands.
+ * Scsi_Host template entry, resets the target and abort all commands.
*/
static int
-bfad_im_reset_bus_handler(struct scsi_cmnd *cmnd)
+bfad_im_reset_target_handler(struct scsi_cmnd *cmnd)
{
struct Scsi_Host *shost = cmnd->device->host;
+ struct scsi_target *starget = scsi_target(cmnd->device);
struct bfad_im_port_s *im_port =
(struct bfad_im_port_s *) shost->hostdata[0];
struct bfad_s *bfad = im_port->bfad;
struct bfad_itnim_s *itnim;
unsigned long flags;
- u32 i, rc, err_cnt = 0;
+ u32 rc, rtn = FAILED;
DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wq);
enum bfi_tskim_status task_status;
spin_lock_irqsave(&bfad->bfad_lock, flags);
- for (i = 0; i < MAX_FCP_TARGET; i++) {
- itnim = bfad_get_itnim(im_port, i);
- if (itnim) {
- cmnd->SCp.ptr = (char *)&wq;
- rc = bfad_im_target_reset_send(bfad, cmnd, itnim);
- if (rc != BFA_STATUS_OK) {
- err_cnt++;
- continue;
- }
-
+ itnim = bfad_get_itnim(im_port, starget->id);
+ if (itnim) {
+ cmnd->SCp.ptr = (char *)&wq;
+ rc = bfad_im_target_reset_send(bfad, cmnd, itnim);
+ if (rc == BFA_STATUS_OK) {
/* wait target reset to complete */
spin_unlock_irqrestore(&bfad->bfad_lock, flags);
wait_event(wq, test_bit(IO_DONE_BIT,
@@ -406,20 +402,17 @@
spin_lock_irqsave(&bfad->bfad_lock, flags);
task_status = cmnd->SCp.Status >> 1;
- if (task_status != BFI_TSKIM_STS_OK) {
+ if (task_status != BFI_TSKIM_STS_OK)
BFA_LOG(KERN_ERR, bfad, bfa_log_level,
"target reset failure,"
" status: %d\n", task_status);
- err_cnt++;
- }
+ else
+ rtn = SUCCESS;
}
}
spin_unlock_irqrestore(&bfad->bfad_lock, flags);
- if (err_cnt)
- return FAILED;
-
- return SUCCESS;
+ return rtn;
}
/*
@@ -816,7 +809,7 @@
.eh_timed_out = fc_eh_timed_out,
.eh_abort_handler = bfad_im_abort_handler,
.eh_device_reset_handler = bfad_im_reset_lun_handler,
- .eh_bus_reset_handler = bfad_im_reset_bus_handler,
+ .eh_target_reset_handler = bfad_im_reset_target_handler,
.slave_alloc = bfad_im_slave_alloc,
.slave_configure = bfad_im_slave_configure,
@@ -839,7 +832,7 @@
.eh_timed_out = fc_eh_timed_out,
.eh_abort_handler = bfad_im_abort_handler,
.eh_device_reset_handler = bfad_im_reset_lun_handler,
- .eh_bus_reset_handler = bfad_im_reset_bus_handler,
+ .eh_target_reset_handler = bfad_im_reset_target_handler,
.slave_alloc = bfad_im_slave_alloc,
.slave_configure = bfad_im_slave_configure,
diff --git a/drivers/scsi/bnx2fc/bnx2fc.h b/drivers/scsi/bnx2fc/bnx2fc.h
index 7e007e1..901a316 100644
--- a/drivers/scsi/bnx2fc/bnx2fc.h
+++ b/drivers/scsi/bnx2fc/bnx2fc.h
@@ -539,7 +539,6 @@
void bnx2fc_add_2_sq(struct bnx2fc_rport *tgt, u16 xid);
void bnx2fc_ring_doorbell(struct bnx2fc_rport *tgt);
int bnx2fc_eh_abort(struct scsi_cmnd *sc_cmd);
-int bnx2fc_eh_host_reset(struct scsi_cmnd *sc_cmd);
int bnx2fc_eh_target_reset(struct scsi_cmnd *sc_cmd);
int bnx2fc_eh_device_reset(struct scsi_cmnd *sc_cmd);
void bnx2fc_rport_event_handler(struct fc_lport *lport,
diff --git a/drivers/scsi/ch.c b/drivers/scsi/ch.c
index dad959f..c535c52 100644
--- a/drivers/scsi/ch.c
+++ b/drivers/scsi/ch.c
@@ -105,6 +105,7 @@
static struct class * ch_sysfs_class;
typedef struct {
+ struct kref ref;
struct list_head list;
int minor;
char name[8];
@@ -563,13 +564,23 @@
/* ------------------------------------------------------------------------ */
+static void ch_destroy(struct kref *ref)
+{
+ scsi_changer *ch = container_of(ref, scsi_changer, ref);
+
+ kfree(ch->dt);
+ kfree(ch);
+}
+
static int
ch_release(struct inode *inode, struct file *file)
{
scsi_changer *ch = file->private_data;
scsi_device_put(ch->device);
+ ch->device = NULL;
file->private_data = NULL;
+ kref_put(&ch->ref, ch_destroy);
return 0;
}
@@ -588,6 +599,7 @@
mutex_unlock(&ch_mutex);
return -ENXIO;
}
+ kref_get(&ch->ref);
spin_unlock(&ch_index_lock);
file->private_data = ch;
@@ -935,8 +947,11 @@
}
mutex_init(&ch->lock);
+ kref_init(&ch->ref);
ch->device = sd;
- ch_readconfig(ch);
+ ret = ch_readconfig(ch);
+ if (ret)
+ goto destroy_dev;
if (init)
ch_init_elem(ch);
@@ -944,6 +959,8 @@
sdev_printk(KERN_INFO, sd, "Attached scsi changer %s\n", ch->name);
return 0;
+destroy_dev:
+ device_destroy(ch_sysfs_class, MKDEV(SCSI_CHANGER_MAJOR, ch->minor));
remove_idr:
idr_remove(&ch_index_idr, ch->minor);
free_ch:
@@ -960,8 +977,7 @@
spin_unlock(&ch_index_lock);
device_destroy(ch_sysfs_class, MKDEV(SCSI_CHANGER_MAJOR,ch->minor));
- kfree(ch->dt);
- kfree(ch);
+ kref_put(&ch->ref, ch_destroy);
return 0;
}
diff --git a/drivers/scsi/csiostor/csio_hw.h b/drivers/scsi/csiostor/csio_hw.h
index 9acb895..6670464 100644
--- a/drivers/scsi/csiostor/csio_hw.h
+++ b/drivers/scsi/csiostor/csio_hw.h
@@ -465,7 +465,7 @@
struct csio_pport pport[CSIO_MAX_PPORTS]; /* Ports (XGMACs) */
struct csio_hw_params params; /* Hw parameters */
- struct pci_pool *scsi_pci_pool; /* PCI pool for SCSI */
+ struct dma_pool *scsi_dma_pool; /* DMA pool for SCSI */
mempool_t *mb_mempool; /* Mailbox memory pool*/
mempool_t *rnode_mempool; /* rnode memory pool */
diff --git a/drivers/scsi/csiostor/csio_init.c b/drivers/scsi/csiostor/csio_init.c
index dcd0741..28a9c7d 100644
--- a/drivers/scsi/csiostor/csio_init.c
+++ b/drivers/scsi/csiostor/csio_init.c
@@ -485,9 +485,10 @@
if (!hw->rnode_mempool)
goto err_free_mb_mempool;
- hw->scsi_pci_pool = pci_pool_create("csio_scsi_pci_pool", hw->pdev,
- CSIO_SCSI_RSP_LEN, 8, 0);
- if (!hw->scsi_pci_pool)
+ hw->scsi_dma_pool = dma_pool_create("csio_scsi_dma_pool",
+ &hw->pdev->dev, CSIO_SCSI_RSP_LEN,
+ 8, 0);
+ if (!hw->scsi_dma_pool)
goto err_free_rn_pool;
return 0;
@@ -505,8 +506,8 @@
static void
csio_resource_free(struct csio_hw *hw)
{
- pci_pool_destroy(hw->scsi_pci_pool);
- hw->scsi_pci_pool = NULL;
+ dma_pool_destroy(hw->scsi_dma_pool);
+ hw->scsi_dma_pool = NULL;
mempool_destroy(hw->rnode_mempool);
hw->rnode_mempool = NULL;
mempool_destroy(hw->mb_mempool);
diff --git a/drivers/scsi/csiostor/csio_scsi.c b/drivers/scsi/csiostor/csio_scsi.c
index a1ff75f..dab0d3f 100644
--- a/drivers/scsi/csiostor/csio_scsi.c
+++ b/drivers/scsi/csiostor/csio_scsi.c
@@ -2445,7 +2445,7 @@
/* Allocate Dma buffers for Response Payload */
dma_buf = &ioreq->dma_buf;
- dma_buf->vaddr = pci_pool_alloc(hw->scsi_pci_pool, GFP_KERNEL,
+ dma_buf->vaddr = dma_pool_alloc(hw->scsi_dma_pool, GFP_KERNEL,
&dma_buf->paddr);
if (!dma_buf->vaddr) {
csio_err(hw,
@@ -2485,7 +2485,7 @@
ioreq = (struct csio_ioreq *)tmp;
dma_buf = &ioreq->dma_buf;
- pci_pool_free(hw->scsi_pci_pool, dma_buf->vaddr,
+ dma_pool_free(hw->scsi_dma_pool, dma_buf->vaddr,
dma_buf->paddr);
kfree(ioreq);
@@ -2516,7 +2516,7 @@
ioreq = (struct csio_ioreq *)tmp;
dma_buf = &ioreq->dma_buf;
- pci_pool_free(scm->hw->scsi_pci_pool, dma_buf->vaddr,
+ dma_pool_free(scm->hw->scsi_dma_pool, dma_buf->vaddr,
dma_buf->paddr);
kfree(ioreq);
diff --git a/drivers/scsi/cxgbi/libcxgbi.c b/drivers/scsi/cxgbi/libcxgbi.c
index 1a4cfa5..512c8f1 100644
--- a/drivers/scsi/cxgbi/libcxgbi.c
+++ b/drivers/scsi/cxgbi/libcxgbi.c
@@ -585,19 +585,21 @@
static struct rtable *find_route_ipv4(struct flowi4 *fl4,
__be32 saddr, __be32 daddr,
- __be16 sport, __be16 dport, u8 tos)
+ __be16 sport, __be16 dport, u8 tos,
+ int ifindex)
{
struct rtable *rt;
rt = ip_route_output_ports(&init_net, fl4, NULL, daddr, saddr,
- dport, sport, IPPROTO_TCP, tos, 0);
+ dport, sport, IPPROTO_TCP, tos, ifindex);
if (IS_ERR(rt))
return NULL;
return rt;
}
-static struct cxgbi_sock *cxgbi_check_route(struct sockaddr *dst_addr)
+static struct cxgbi_sock *
+cxgbi_check_route(struct sockaddr *dst_addr, int ifindex)
{
struct sockaddr_in *daddr = (struct sockaddr_in *)dst_addr;
struct dst_entry *dst;
@@ -611,7 +613,8 @@
int port = 0xFFFF;
int err = 0;
- rt = find_route_ipv4(&fl4, 0, daddr->sin_addr.s_addr, 0, daddr->sin_port, 0);
+ rt = find_route_ipv4(&fl4, 0, daddr->sin_addr.s_addr, 0,
+ daddr->sin_port, 0, ifindex);
if (!rt) {
pr_info("no route to ipv4 0x%x, port %u.\n",
be32_to_cpu(daddr->sin_addr.s_addr),
@@ -693,11 +696,13 @@
#if IS_ENABLED(CONFIG_IPV6)
static struct rt6_info *find_route_ipv6(const struct in6_addr *saddr,
- const struct in6_addr *daddr)
+ const struct in6_addr *daddr,
+ int ifindex)
{
struct flowi6 fl;
memset(&fl, 0, sizeof(fl));
+ fl.flowi6_oif = ifindex;
if (saddr)
memcpy(&fl.saddr, saddr, sizeof(struct in6_addr));
if (daddr)
@@ -705,7 +710,8 @@
return (struct rt6_info *)ip6_route_output(&init_net, NULL, &fl);
}
-static struct cxgbi_sock *cxgbi_check_route6(struct sockaddr *dst_addr)
+static struct cxgbi_sock *
+cxgbi_check_route6(struct sockaddr *dst_addr, int ifindex)
{
struct sockaddr_in6 *daddr6 = (struct sockaddr_in6 *)dst_addr;
struct dst_entry *dst;
@@ -719,7 +725,7 @@
int port = 0xFFFF;
int err = 0;
- rt = find_route_ipv6(NULL, &daddr6->sin6_addr);
+ rt = find_route_ipv6(NULL, &daddr6->sin6_addr, ifindex);
if (!rt) {
pr_info("no route to ipv6 %pI6 port %u\n",
@@ -2536,6 +2542,7 @@
struct cxgbi_endpoint *cep;
struct cxgbi_hba *hba = NULL;
struct cxgbi_sock *csk;
+ int ifindex = 0;
int err = -EINVAL;
log_debug(1 << CXGBI_DBG_ISCSI | 1 << CXGBI_DBG_SOCK,
@@ -2548,13 +2555,15 @@
pr_info("shost 0x%p, priv NULL.\n", shost);
goto err_out;
}
+
+ ifindex = hba->ndev->ifindex;
}
if (dst_addr->sa_family == AF_INET) {
- csk = cxgbi_check_route(dst_addr);
+ csk = cxgbi_check_route(dst_addr, ifindex);
#if IS_ENABLED(CONFIG_IPV6)
} else if (dst_addr->sa_family == AF_INET6) {
- csk = cxgbi_check_route6(dst_addr);
+ csk = cxgbi_check_route6(dst_addr, ifindex);
#endif
} else {
pr_info("address family 0x%x NOT supported.\n",
diff --git a/drivers/scsi/cxlflash/main.c b/drivers/scsi/cxlflash/main.c
index 6a4367c..76b8b7ee 100644
--- a/drivers/scsi/cxlflash/main.c
+++ b/drivers/scsi/cxlflash/main.c
@@ -820,8 +820,7 @@
for (k = cfg->afu->num_hwqs - 1; k >= 0; k--)
term_intr(cfg, UNMAP_THREE, k);
- if (cfg->afu)
- stop_afu(cfg);
+ stop_afu(cfg);
for (k = cfg->afu->num_hwqs - 1; k >= 0; k--)
term_mc(cfg, k);
diff --git a/drivers/scsi/cxlflash/superpipe.c b/drivers/scsi/cxlflash/superpipe.c
index ad0f996..ed46e8d 100644
--- a/drivers/scsi/cxlflash/superpipe.c
+++ b/drivers/scsi/cxlflash/superpipe.c
@@ -1390,6 +1390,7 @@
if (unlikely(!ctxi)) {
dev_err(dev, "%s: Failed to create context ctxid=%d\n",
__func__, ctxid);
+ rc = -ENOMEM;
goto err;
}
@@ -1650,6 +1651,7 @@
u64 ctxid = DECODE_CTXID(recover->context_id),
rctxid = recover->context_id;
long reg;
+ bool locked = true;
int lretry = 20; /* up to 2 seconds */
int new_adap_fd = -1;
int rc = 0;
@@ -1658,8 +1660,11 @@
up_read(&cfg->ioctl_rwsem);
rc = mutex_lock_interruptible(mutex);
down_read(&cfg->ioctl_rwsem);
- if (rc)
+ if (rc) {
+ locked = false;
goto out;
+ }
+
rc = check_state(cfg);
if (rc) {
dev_err(dev, "%s: Failed state rc=%d\n", __func__, rc);
@@ -1693,8 +1698,10 @@
mutex_unlock(mutex);
msleep(100);
rc = mutex_lock_interruptible(mutex);
- if (rc)
+ if (rc) {
+ locked = false;
goto out;
+ }
goto retry_recover;
}
@@ -1738,7 +1745,8 @@
out:
if (likely(ctxi))
put_context(ctxi);
- mutex_unlock(mutex);
+ if (locked)
+ mutex_unlock(mutex);
atomic_dec_if_positive(&cfg->recovery_threads);
return rc;
}
diff --git a/drivers/scsi/cxlflash/vlun.c b/drivers/scsi/cxlflash/vlun.c
index bdfb930..703bf1e 100644
--- a/drivers/scsi/cxlflash/vlun.c
+++ b/drivers/scsi/cxlflash/vlun.c
@@ -694,11 +694,7 @@
/* Free LBAs allocated to freed chunks */
mutex_lock(&blka->mutex);
for (i = delta - 1; i >= 0; i--) {
- /* Mask the higher 48 bits before shifting, even though
- * it is a noop
- */
- aun = (lxt_old[my_new_size + i].rlba_base & SISL_ASTATUS_MASK);
- aun = (aun >> MC_CHUNK_SHIFT);
+ aun = lxt_old[my_new_size + i].rlba_base >> MC_CHUNK_SHIFT;
if (needs_ws)
write_same16(sdev, aun, MC_CHUNK_SIZE);
ba_free(&blka->ba_lun, aun);
diff --git a/drivers/scsi/dmx3191d.c b/drivers/scsi/dmx3191d.c
index 6af3394..003c3d7 100644
--- a/drivers/scsi/dmx3191d.c
+++ b/drivers/scsi/dmx3191d.c
@@ -58,7 +58,7 @@
.info = NCR5380_info,
.queuecommand = NCR5380_queue_command,
.eh_abort_handler = NCR5380_abort,
- .eh_bus_reset_handler = NCR5380_bus_reset,
+ .eh_host_reset_handler = NCR5380_host_reset,
.can_queue = 32,
.this_id = 7,
.sg_tablesize = SG_ALL,
diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
index 256dd67..fd172b0 100644
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -1169,11 +1169,6 @@
if(chan < 0 || chan >= MAX_CHANNEL)
return NULL;
- if( pHba->channel[chan].device == NULL){
- printk(KERN_DEBUG"Adaptec I2O RAID: Trying to find device before they are allocated\n");
- return NULL;
- }
-
d = pHba->channel[chan].device[id];
if(!d || d->tid == 0) {
return NULL;
diff --git a/drivers/scsi/eata.c b/drivers/scsi/eata.c
index 227dd2c..6501c33 100644
--- a/drivers/scsi/eata.c
+++ b/drivers/scsi/eata.c
@@ -1899,7 +1899,6 @@
static int eata2x_eh_host_reset(struct scsi_cmnd *SCarg)
{
unsigned int i, time, k, c, limit = 0;
- int arg_done = 0;
struct scsi_cmnd *SCpnt;
struct Scsi_Host *shost = SCarg->device->host;
struct hostdata *ha = (struct hostdata *)shost->hostdata;
@@ -1967,9 +1966,6 @@
if (SCpnt->scsi_done == NULL)
panic("%s: reset, mbox %d, SCpnt->scsi_done == NULL.\n",
ha->board_name, i);
-
- if (SCpnt == SCarg)
- arg_done = 1;
}
if (do_dma(shost->io_port, 0, RESET_PIO)) {
@@ -2037,10 +2033,7 @@
ha->in_reset = 0;
do_trace = 0;
- if (arg_done)
- printk("%s: reset, exit, done.\n", ha->board_name);
- else
- printk("%s: reset, exit.\n", ha->board_name);
+ printk("%s: reset, exit.\n", ha->board_name);
spin_unlock_irq(shost->host_lock);
return SUCCESS;
diff --git a/drivers/scsi/esas2r/esas2r_main.c b/drivers/scsi/esas2r/esas2r_main.c
index f2e9d8a..81f226b 100644
--- a/drivers/scsi/esas2r/esas2r_main.c
+++ b/drivers/scsi/esas2r/esas2r_main.c
@@ -309,7 +309,7 @@
"Defines the interrupt mode to use. 0 for legacy"
", 1 for MSI. Default is MSI (1).");
-static struct pci_device_id
+static const struct pci_device_id
esas2r_pci_table[] = {
{ ATTO_VENDOR_ID, 0x0049, ATTO_VENDOR_ID, 0x0049,
0,
diff --git a/drivers/scsi/esp_scsi.c b/drivers/scsi/esp_scsi.c
index 71cb05b..c3fc34b 100644
--- a/drivers/scsi/esp_scsi.c
+++ b/drivers/scsi/esp_scsi.c
@@ -597,14 +597,12 @@
lp->non_tagged_cmd = ent;
return 0;
- } else {
- /* Tagged command, see if blocked by a
- * non-tagged one.
- */
- if (lp->non_tagged_cmd || lp->hold)
- return -EBUSY;
}
+ /* Tagged command. Check that it isn't blocked by a non-tagged one. */
+ if (lp->non_tagged_cmd || lp->hold)
+ return -EBUSY;
+
BUG_ON(lp->tagged_cmds[ent->orig_tag[1]]);
lp->tagged_cmds[ent->orig_tag[1]] = ent;
@@ -1210,12 +1208,6 @@
esp->active_cmd = ent;
- if (ent->flags & ESP_CMD_FLAG_ABORT) {
- esp->msg_out[0] = ABORT_TASK_SET;
- esp->msg_out_len = 1;
- scsi_esp_cmd(esp, ESP_CMD_SATN);
- }
-
esp_event(esp, ESP_EVENT_CHECK_PHASE);
esp_restore_pointers(esp, ent);
esp->flags |= ESP_FLAG_QUICKIRQ_CHECK;
@@ -1230,9 +1222,6 @@
{
struct esp_cmd_entry *ent;
struct scsi_cmnd *cmd;
- u8 orig_select_state;
-
- orig_select_state = esp->select_state;
/* No longer selecting. */
esp->select_state = ESP_SELECT_NONE;
@@ -1496,9 +1485,8 @@
return;
}
- esp->msg_out[0] = ABORT_TASK_SET;
- esp->msg_out_len = 1;
- scsi_esp_cmd(esp, ESP_CMD_SATN);
+ shost_printk(KERN_INFO, esp->host, "Unexpected MESSAGE REJECT\n");
+ esp_schedule_reset(esp);
}
static void esp_msgin_sdtr(struct esp *esp, struct esp_target_data *tp)
@@ -1621,7 +1609,7 @@
shost_printk(KERN_INFO, esp->host,
"Unexpected extended msg type %x\n", esp->msg_in[2]);
- esp->msg_out[0] = ABORT_TASK_SET;
+ esp->msg_out[0] = MESSAGE_REJECT;
esp->msg_out_len = 1;
scsi_esp_cmd(esp, ESP_CMD_SATN);
}
@@ -1745,7 +1733,6 @@
return 0;
}
goto again;
- break;
case ESP_EVENT_DATA_IN:
write = 1;
@@ -1956,12 +1943,16 @@
} else {
if (esp->msg_out_len > 1)
esp->ops->dma_invalidate(esp);
- }
- if (!(esp->ireg & ESP_INTR_DC)) {
- if (esp->rev != FASHME)
+ /* XXX if the chip went into disconnected mode,
+ * we can't run the phase state machine anyway.
+ */
+ if (!(esp->ireg & ESP_INTR_DC))
scsi_esp_cmd(esp, ESP_CMD_NULL);
}
+
+ esp->msg_out_len = 0;
+
esp_event(esp, ESP_EVENT_CHECK_PHASE);
goto again;
case ESP_EVENT_MSGIN:
@@ -1998,6 +1989,10 @@
scsi_esp_cmd(esp, ESP_CMD_MOK);
+ /* Check whether a bus reset is to be done next */
+ if (esp->event == ESP_EVENT_RESET)
+ return 0;
+
if (esp->event != ESP_EVENT_FREE_BUS)
esp_event(esp, ESP_EVENT_CHECK_PHASE);
} else {
@@ -2022,7 +2017,6 @@
}
esp_schedule_reset(esp);
return 0;
- break;
case ESP_EVENT_RESET:
scsi_esp_cmd(esp, ESP_CMD_RS);
@@ -2033,7 +2027,6 @@
"Unexpected event %x, resetting\n", esp->event);
esp_schedule_reset(esp);
return 0;
- break;
}
return 1;
}
@@ -2170,14 +2163,14 @@
esp_schedule_reset(esp);
} else {
- if (!(esp->ireg & ESP_INTR_RSEL)) {
- /* Some combination of FDONE, BSERV, DC. */
- if (esp->select_state != ESP_SELECT_NONE)
- intr_done = esp_finish_select(esp);
- } else if (esp->ireg & ESP_INTR_RSEL) {
+ if (esp->ireg & ESP_INTR_RSEL) {
if (esp->active_cmd)
(void) esp_finish_select(esp);
intr_done = esp_reconnect(esp);
+ } else {
+ /* Some combination of FDONE, BSERV, DC. */
+ if (esp->select_state != ESP_SELECT_NONE)
+ intr_done = esp_finish_select(esp);
}
}
while (!intr_done)
diff --git a/drivers/scsi/esp_scsi.h b/drivers/scsi/esp_scsi.h
index 84dcbe4..7e8932a 100644
--- a/drivers/scsi/esp_scsi.h
+++ b/drivers/scsi/esp_scsi.h
@@ -281,7 +281,6 @@
u8 flags;
#define ESP_CMD_FLAG_WRITE 0x01 /* DMA is a write */
-#define ESP_CMD_FLAG_ABORT 0x02 /* being aborted */
#define ESP_CMD_FLAG_AUTOSENSE 0x04 /* Doing automatic REQUEST_SENSE */
#define ESP_CMD_FLAG_RESIDUAL 0x08 /* AM53c974 BLAST residual */
diff --git a/drivers/scsi/fcoe/fcoe_sysfs.c b/drivers/scsi/fcoe/fcoe_sysfs.c
index 9cf3d56..5c8310b 100644
--- a/drivers/scsi/fcoe/fcoe_sysfs.c
+++ b/drivers/scsi/fcoe/fcoe_sysfs.c
@@ -659,13 +659,13 @@
kfree(fcf);
}
-static struct device_type fcoe_ctlr_device_type = {
+static const struct device_type fcoe_ctlr_device_type = {
.name = "fcoe_ctlr",
.groups = fcoe_ctlr_attr_groups,
.release = fcoe_ctlr_device_release,
};
-static struct device_type fcoe_fcf_device_type = {
+static const struct device_type fcoe_fcf_device_type = {
.name = "fcoe_fcf",
.groups = fcoe_fcf_attr_groups,
.release = fcoe_fcf_device_release,
diff --git a/drivers/scsi/fdomain.c b/drivers/scsi/fdomain.c
index b87ab38..ebbe5a3 100644
--- a/drivers/scsi/fdomain.c
+++ b/drivers/scsi/fdomain.c
@@ -933,7 +933,7 @@
}
}
- fdomain_16x0_bus_reset(NULL);
+ fdomain_16x0_host_reset(NULL);
if (fdomain_test_loopback()) {
printk(KERN_ERR "scsi: <fdomain> Detection failed (loopback test failed at port base 0x%x)\n", port_base);
@@ -1568,7 +1568,7 @@
return SUCCESS;
}
-int fdomain_16x0_bus_reset(struct scsi_cmnd *SCpnt)
+int fdomain_16x0_host_reset(struct scsi_cmnd *SCpnt)
{
unsigned long flags;
@@ -1758,7 +1758,7 @@
.info = fdomain_16x0_info,
.queuecommand = fdomain_16x0_queue,
.eh_abort_handler = fdomain_16x0_abort,
- .eh_bus_reset_handler = fdomain_16x0_bus_reset,
+ .eh_host_reset_handler = fdomain_16x0_host_reset,
.bios_param = fdomain_16x0_biosparam,
.release = fdomain_16x0_release,
.can_queue = 1,
diff --git a/drivers/scsi/fdomain.h b/drivers/scsi/fdomain.h
index 47021d9..5cbe86b 100644
--- a/drivers/scsi/fdomain.h
+++ b/drivers/scsi/fdomain.h
@@ -21,4 +21,4 @@
extern struct scsi_host_template fdomain_driver_template;
extern int fdomain_setup(char *str);
extern struct Scsi_Host *__fdomain_16x0_detect(struct scsi_host_template *tpnt );
-extern int fdomain_16x0_bus_reset(struct scsi_cmnd *SCpnt);
+extern int fdomain_16x0_host_reset(struct scsi_cmnd *SCpnt);
diff --git a/drivers/scsi/fnic/fnic.h b/drivers/scsi/fnic/fnic.h
index 67aab96..d094ba5 100644
--- a/drivers/scsi/fnic/fnic.h
+++ b/drivers/scsi/fnic/fnic.h
@@ -180,7 +180,7 @@
struct fnic_msix_entry {
int requested;
- char devname[IFNAMSIZ];
+ char devname[IFNAMSIZ + 11];
irqreturn_t (*isr)(int, void *);
void *devid;
};
diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c
index 6c0646d..242e2ee 100644
--- a/drivers/scsi/fnic/fnic_scsi.c
+++ b/drivers/scsi/fnic/fnic_scsi.c
@@ -1990,10 +1990,6 @@
FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
"Issuing Host reset due to out of order IO\n");
- if (fnic_host_reset(sc) == FAILED) {
- FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
- "fnic_host_reset failed.\n");
- }
ret = FAILED;
goto fnic_abort_cmd_end;
}
diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
index c34fc91..fc53818 100644
--- a/drivers/scsi/g_NCR5380.c
+++ b/drivers/scsi/g_NCR5380.c
@@ -1,17 +1,17 @@
/*
* Generic Generic NCR5380 driver
- *
+ *
* Copyright 1993, Drew Eckhardt
- * Visionary Computing
- * (Unix and Linux consulting and custom programming)
- * drew@colorado.edu
- * +1 (303) 440-4894
+ * Visionary Computing
+ * (Unix and Linux consulting and custom programming)
+ * drew@colorado.edu
+ * +1 (303) 440-4894
*
* NCR53C400 extensions (c) 1994,1995,1996, Kevin Lentin
- * K.Lentin@cs.monash.edu.au
+ * K.Lentin@cs.monash.edu.au
*
* NCR53C400A extensions (c) 1996, Ingmar Baumgart
- * ingmar@gonzo.schwaben.de
+ * ingmar@gonzo.schwaben.de
*
* DTC3181E extensions (c) 1997, Ronald van Cuijlenborg
* ronald.van.cuijlenborg@tip.nl or nutty@dds.nl
@@ -44,17 +44,19 @@
int c400_ctl_status; \
int c400_blk_cnt; \
int c400_host_buf; \
- int io_width
+ int io_width; \
+ int pdma_residual; \
+ int board
#define NCR5380_dma_xfer_len generic_NCR5380_dma_xfer_len
-#define NCR5380_dma_recv_setup generic_NCR5380_pread
-#define NCR5380_dma_send_setup generic_NCR5380_pwrite
-#define NCR5380_dma_residual NCR5380_dma_residual_none
+#define NCR5380_dma_recv_setup generic_NCR5380_precv
+#define NCR5380_dma_send_setup generic_NCR5380_psend
+#define NCR5380_dma_residual generic_NCR5380_dma_residual
#define NCR5380_intr generic_NCR5380_intr
#define NCR5380_queue_command generic_NCR5380_queue_command
#define NCR5380_abort generic_NCR5380_abort
-#define NCR5380_bus_reset generic_NCR5380_bus_reset
+#define NCR5380_host_reset generic_NCR5380_host_reset
#define NCR5380_info generic_NCR5380_info
#define NCR5380_io_delay(x) udelay(x)
@@ -76,6 +78,7 @@
#define IRQ_AUTO 254
#define MAX_CARDS 8
+#define DMA_MAX_SIZE 32768
/* old-style parameters for compatibility */
static int ncr_irq = -1;
@@ -314,6 +317,7 @@
}
hostdata = shost_priv(instance);
+ hostdata->board = board;
hostdata->io = iomem;
hostdata->region_size = region_size;
@@ -478,180 +482,210 @@
release_mem_region(base, region_size);
}
-/**
- * generic_NCR5380_pread - pseudo DMA read
- * @hostdata: scsi host private data
- * @dst: buffer to read into
- * @len: buffer length
+/* wait_for_53c80_access - wait for 53C80 registers to become accessible
+ * @hostdata: scsi host private data
*
- * Perform a pseudo DMA mode read from an NCR53C400 or equivalent
- * controller
+ * The registers within the 53C80 logic block are inaccessible until
+ * bit 7 in the 53C400 control status register gets asserted.
*/
-
-static inline int generic_NCR5380_pread(struct NCR5380_hostdata *hostdata,
+
+static void wait_for_53c80_access(struct NCR5380_hostdata *hostdata)
+{
+ int count = 10000;
+
+ do {
+ if (hostdata->board == BOARD_DTC3181E)
+ udelay(4); /* DTC436 chip hangs without this */
+ if (NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG)
+ return;
+ } while (--count > 0);
+
+ scmd_printk(KERN_ERR, hostdata->connected,
+ "53c80 registers not accessible, device will be reset\n");
+ NCR5380_write(hostdata->c400_ctl_status, CSR_RESET);
+ NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
+}
+
+/**
+ * generic_NCR5380_precv - pseudo DMA receive
+ * @hostdata: scsi host private data
+ * @dst: buffer to write into
+ * @len: transfer size
+ *
+ * Perform a pseudo DMA mode receive from a 53C400 or equivalent device.
+ */
+
+static inline int generic_NCR5380_precv(struct NCR5380_hostdata *hostdata,
unsigned char *dst, int len)
{
- int blocks = len / 128;
+ int residual;
int start = 0;
NCR5380_write(hostdata->c400_ctl_status, CSR_BASE | CSR_TRANS_DIR);
- NCR5380_write(hostdata->c400_blk_cnt, blocks);
- while (1) {
- if (NCR5380_read(hostdata->c400_blk_cnt) == 0)
- break;
- if (NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ) {
- printk(KERN_ERR "53C400r: Got 53C80_IRQ start=%d, blocks=%d\n", start, blocks);
- return -1;
+ NCR5380_write(hostdata->c400_blk_cnt, len / 128);
+
+ do {
+ if (start == len - 128) {
+ /* Ignore End of DMA interrupt for the final buffer */
+ if (NCR5380_poll_politely(hostdata, hostdata->c400_ctl_status,
+ CSR_HOST_BUF_NOT_RDY, 0, HZ / 64) < 0)
+ break;
+ } else {
+ if (NCR5380_poll_politely2(hostdata, hostdata->c400_ctl_status,
+ CSR_HOST_BUF_NOT_RDY, 0,
+ hostdata->c400_ctl_status,
+ CSR_GATED_53C80_IRQ,
+ CSR_GATED_53C80_IRQ, HZ / 64) < 0 ||
+ NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
+ break;
}
- while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
- ; /* FIXME - no timeout */
if (hostdata->io_port && hostdata->io_width == 2)
insw(hostdata->io_port + hostdata->c400_host_buf,
- dst + start, 64);
+ dst + start, 64);
else if (hostdata->io_port)
insb(hostdata->io_port + hostdata->c400_host_buf,
- dst + start, 128);
+ dst + start, 128);
else
memcpy_fromio(dst + start,
hostdata->io + NCR53C400_host_buffer, 128);
-
start += 128;
- blocks--;
+ } while (start < len);
+
+ residual = len - start;
+
+ if (residual != 0) {
+ /* 53c80 interrupt or transfer timeout. Reset 53c400 logic. */
+ NCR5380_write(hostdata->c400_ctl_status, CSR_RESET);
+ NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
}
+ wait_for_53c80_access(hostdata);
- if (blocks) {
- while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
- ; /* FIXME - no timeout */
+ if (residual == 0 && NCR5380_poll_politely(hostdata, BUS_AND_STATUS_REG,
+ BASR_END_DMA_TRANSFER,
+ BASR_END_DMA_TRANSFER,
+ HZ / 64) < 0)
+ scmd_printk(KERN_ERR, hostdata->connected, "%s: End of DMA timeout\n",
+ __func__);
- if (hostdata->io_port && hostdata->io_width == 2)
- insw(hostdata->io_port + hostdata->c400_host_buf,
- dst + start, 64);
- else if (hostdata->io_port)
- insb(hostdata->io_port + hostdata->c400_host_buf,
- dst + start, 128);
- else
- memcpy_fromio(dst + start,
- hostdata->io + NCR53C400_host_buffer, 128);
+ hostdata->pdma_residual = residual;
- start += 128;
- blocks--;
- }
-
- if (!(NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ))
- printk("53C400r: no 53C80 gated irq after transfer");
-
- /* wait for 53C80 registers to be available */
- while (!(NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG))
- ;
-
- if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_END_DMA_TRANSFER))
- printk(KERN_ERR "53C400r: no end dma signal\n");
-
return 0;
}
/**
- * generic_NCR5380_pwrite - pseudo DMA write
- * @hostdata: scsi host private data
- * @dst: buffer to read into
- * @len: buffer length
+ * generic_NCR5380_psend - pseudo DMA send
+ * @hostdata: scsi host private data
+ * @src: buffer to read from
+ * @len: transfer size
*
- * Perform a pseudo DMA mode read from an NCR53C400 or equivalent
- * controller
+ * Perform a pseudo DMA mode send to a 53C400 or equivalent device.
*/
-static inline int generic_NCR5380_pwrite(struct NCR5380_hostdata *hostdata,
- unsigned char *src, int len)
+static inline int generic_NCR5380_psend(struct NCR5380_hostdata *hostdata,
+ unsigned char *src, int len)
{
- int blocks = len / 128;
+ int residual;
int start = 0;
NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
- NCR5380_write(hostdata->c400_blk_cnt, blocks);
- while (1) {
- if (NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ) {
- printk(KERN_ERR "53C400w: Got 53C80_IRQ start=%d, blocks=%d\n", start, blocks);
- return -1;
+ NCR5380_write(hostdata->c400_blk_cnt, len / 128);
+
+ do {
+ if (NCR5380_poll_politely2(hostdata, hostdata->c400_ctl_status,
+ CSR_HOST_BUF_NOT_RDY, 0,
+ hostdata->c400_ctl_status,
+ CSR_GATED_53C80_IRQ,
+ CSR_GATED_53C80_IRQ, HZ / 64) < 0 ||
+ NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY) {
+ /* Both 128 B buffers are in use */
+ if (start >= 128)
+ start -= 128;
+ if (start >= 128)
+ start -= 128;
+ break;
}
- if (NCR5380_read(hostdata->c400_blk_cnt) == 0)
+ if (start >= len && NCR5380_read(hostdata->c400_blk_cnt) == 0)
break;
- while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
- ; // FIXME - timeout
+
+ if (NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ) {
+ /* Host buffer is empty, other one is in use */
+ if (start >= 128)
+ start -= 128;
+ break;
+ }
+
+ if (start >= len)
+ continue;
if (hostdata->io_port && hostdata->io_width == 2)
outsw(hostdata->io_port + hostdata->c400_host_buf,
- src + start, 64);
+ src + start, 64);
else if (hostdata->io_port)
outsb(hostdata->io_port + hostdata->c400_host_buf,
- src + start, 128);
+ src + start, 128);
else
memcpy_toio(hostdata->io + NCR53C400_host_buffer,
src + start, 128);
-
start += 128;
- blocks--;
+ } while (1);
+
+ residual = len - start;
+
+ if (residual != 0) {
+ /* 53c80 interrupt or transfer timeout. Reset 53c400 logic. */
+ NCR5380_write(hostdata->c400_ctl_status, CSR_RESET);
+ NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
}
- if (blocks) {
- while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
- ; // FIXME - no timeout
+ wait_for_53c80_access(hostdata);
- if (hostdata->io_port && hostdata->io_width == 2)
- outsw(hostdata->io_port + hostdata->c400_host_buf,
- src + start, 64);
- else if (hostdata->io_port)
- outsb(hostdata->io_port + hostdata->c400_host_buf,
- src + start, 128);
- else
- memcpy_toio(hostdata->io + NCR53C400_host_buffer,
- src + start, 128);
+ if (residual == 0) {
+ if (NCR5380_poll_politely(hostdata, TARGET_COMMAND_REG,
+ TCR_LAST_BYTE_SENT, TCR_LAST_BYTE_SENT,
+ HZ / 64) < 0)
+ scmd_printk(KERN_ERR, hostdata->connected,
+ "%s: Last Byte Sent timeout\n", __func__);
- start += 128;
- blocks--;
+ if (NCR5380_poll_politely(hostdata, BUS_AND_STATUS_REG,
+ BASR_END_DMA_TRANSFER, BASR_END_DMA_TRANSFER,
+ HZ / 64) < 0)
+ scmd_printk(KERN_ERR, hostdata->connected, "%s: End of DMA timeout\n",
+ __func__);
}
- /* wait for 53C80 registers to be available */
- while (!(NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG)) {
- udelay(4); /* DTC436 chip hangs without this */
- /* FIXME - no timeout */
- }
+ hostdata->pdma_residual = residual;
- if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_END_DMA_TRANSFER)) {
- printk(KERN_ERR "53C400w: no end dma signal\n");
- }
-
- while (!(NCR5380_read(TARGET_COMMAND_REG) & TCR_LAST_BYTE_SENT))
- ; // TIMEOUT
return 0;
}
static int generic_NCR5380_dma_xfer_len(struct NCR5380_hostdata *hostdata,
struct scsi_cmnd *cmd)
{
- int transfersize = cmd->transfersize;
+ int transfersize = cmd->SCp.this_residual;
if (hostdata->flags & FLAG_NO_PSEUDO_DMA)
return 0;
- /* Limit transfers to 32K, for xx400 & xx406
- * pseudoDMA that transfers in 128 bytes blocks.
- */
- if (transfersize > 32 * 1024 && cmd->SCp.this_residual &&
- !(cmd->SCp.this_residual % transfersize))
- transfersize = 32 * 1024;
-
/* 53C400 datasheet: non-modulo-128-byte transfers should use PIO */
if (transfersize % 128)
- transfersize = 0;
+ return 0;
- return transfersize;
+ /* Limit PDMA send to 512 B to avoid random corruption on DTC3181E */
+ if (hostdata->board == BOARD_DTC3181E &&
+ cmd->sc_data_direction == DMA_TO_DEVICE)
+ transfersize = min(cmd->SCp.this_residual, 512);
+
+ return min(transfersize, DMA_MAX_SIZE);
}
-/*
- * Include the NCR5380 core code that we build our driver around
- */
-
+static int generic_NCR5380_dma_residual(struct NCR5380_hostdata *hostdata)
+{
+ return hostdata->pdma_residual;
+}
+
+/* Include the core driver code. */
+
#include "NCR5380.c"
static struct scsi_host_template driver_template = {
@@ -661,7 +695,7 @@
.info = generic_NCR5380_info,
.queuecommand = generic_NCR5380_queue_command,
.eh_abort_handler = generic_NCR5380_abort,
- .eh_bus_reset_handler = generic_NCR5380_bus_reset,
+ .eh_host_reset_handler = generic_NCR5380_host_reset,
.can_queue = 16,
.this_id = 7,
.sg_tablesize = SG_ALL,
@@ -671,11 +705,10 @@
.max_sectors = 128,
};
-
static int generic_NCR5380_isa_match(struct device *pdev, unsigned int ndev)
{
int ret = generic_NCR5380_init_one(&driver_template, pdev, base[ndev],
- irq[ndev], card[ndev]);
+ irq[ndev], card[ndev]);
if (ret) {
if (base[ndev])
printk(KERN_WARNING "Card not found at address 0x%03x\n",
@@ -687,7 +720,7 @@
}
static int generic_NCR5380_isa_remove(struct device *pdev,
- unsigned int ndev)
+ unsigned int ndev)
{
generic_NCR5380_release_resources(dev_get_drvdata(pdev));
dev_set_drvdata(pdev, NULL);
@@ -703,14 +736,14 @@
};
#ifdef CONFIG_PNP
-static struct pnp_device_id generic_NCR5380_pnp_ids[] = {
+static const struct pnp_device_id generic_NCR5380_pnp_ids[] = {
{ .id = "DTC436e", .driver_data = BOARD_DTC3181E },
{ .id = "" }
};
MODULE_DEVICE_TABLE(pnp, generic_NCR5380_pnp_ids);
static int generic_NCR5380_pnp_probe(struct pnp_dev *pdev,
- const struct pnp_device_id *id)
+ const struct pnp_device_id *id)
{
int base, irq;
@@ -721,7 +754,7 @@
irq = pnp_irq(pdev, 0);
return generic_NCR5380_init_one(&driver_template, &pdev->dev, base, irq,
- id->driver_data);
+ id->driver_data);
}
static void generic_NCR5380_pnp_remove(struct pnp_dev *pdev)
diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c
index facc727..a4473356a 100644
--- a/drivers/scsi/gdth.c
+++ b/drivers/scsi/gdth.c
@@ -2354,7 +2354,7 @@
inq.resp_aenc = 2;
inq.add_length= 32;
strcpy(inq.vendor,ha->oem_name);
- sprintf(inq.product,"Host Drive #%02d",t);
+ snprintf(inq.product, sizeof(inq.product), "Host Drive #%02d",t);
strcpy(inq.revision," ");
gdth_copy_internal_data(ha, scp, (char*)&inq, sizeof(gdth_inq_data));
break;
diff --git a/drivers/scsi/gdth_proc.c b/drivers/scsi/gdth_proc.c
index be609db..d08b271 100644
--- a/drivers/scsi/gdth_proc.c
+++ b/drivers/scsi/gdth_proc.c
@@ -147,7 +147,7 @@
gdth_cmd_str *gdtcmd;
gdth_evt_str *estr;
- char hrec[161];
+ char hrec[277];
char *buf;
gdth_dskstat_str *pds;
diff --git a/drivers/scsi/gvp11.c b/drivers/scsi/gvp11.c
index 3b6f83f..a27fc49 100644
--- a/drivers/scsi/gvp11.c
+++ b/drivers/scsi/gvp11.c
@@ -171,23 +171,6 @@
}
}
-static int gvp11_bus_reset(struct scsi_cmnd *cmd)
-{
- struct Scsi_Host *instance = cmd->device->host;
-
- /* FIXME perform bus-specific reset */
-
- /* FIXME 2: shouldn't we no-op this function (return
- FAILED), and fall back to host reset function,
- wd33c93_host_reset ? */
-
- spin_lock_irq(instance->host_lock);
- wd33c93_host_reset(cmd);
- spin_unlock_irq(instance->host_lock);
-
- return SUCCESS;
-}
-
static struct scsi_host_template gvp11_scsi_template = {
.module = THIS_MODULE,
.name = "GVP Series II SCSI",
@@ -196,7 +179,6 @@
.proc_name = "GVP11",
.queuecommand = wd33c93_queuecommand,
.eh_abort_handler = wd33c93_abort,
- .eh_bus_reset_handler = gvp11_bus_reset,
.eh_host_reset_handler = wd33c93_host_reset,
.can_queue = CAN_QUEUE,
.this_id = 7,
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index a722f2b..07f4a4c 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -15,6 +15,7 @@
#include <linux/acpi.h>
#include <linux/clk.h>
#include <linux/dmapool.h>
+#include <linux/iopoll.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of_address.h>
@@ -25,14 +26,13 @@
#include <scsi/sas_ata.h>
#include <scsi/libsas.h>
-#define DRV_VERSION "v1.6"
-
#define HISI_SAS_MAX_PHYS 9
#define HISI_SAS_MAX_QUEUES 32
#define HISI_SAS_QUEUE_SLOTS 512
#define HISI_SAS_MAX_ITCT_ENTRIES 2048
#define HISI_SAS_MAX_DEVICES HISI_SAS_MAX_ITCT_ENTRIES
#define HISI_SAS_RESET_BIT 0
+#define HISI_SAS_REJECT_CMD_BIT 1
#define HISI_SAS_STATUS_BUF_SZ (sizeof(struct hisi_sas_status_buffer))
#define HISI_SAS_COMMAND_TABLE_SZ (sizeof(union hisi_sas_command_table))
@@ -90,6 +90,14 @@
HISI_SAS_DEV_TYPE_SATA,
};
+struct hisi_sas_hw_error {
+ u32 irq_msk;
+ u32 msk;
+ int shift;
+ const char *msg;
+ int reg;
+};
+
struct hisi_sas_phy {
struct hisi_hba *hisi_hba;
struct hisi_sas_port *port;
@@ -132,6 +140,7 @@
struct hisi_sas_device {
struct hisi_hba *hisi_hba;
struct domain_device *sas_device;
+ struct completion *completion;
struct hisi_sas_dq *dq;
struct list_head list;
u64 attached_phy;
@@ -192,6 +201,7 @@
void (*phy_enable)(struct hisi_hba *hisi_hba, int phy_no);
void (*phy_disable)(struct hisi_hba *hisi_hba, int phy_no);
void (*phy_hard_reset)(struct hisi_hba *hisi_hba, int phy_no);
+ void (*get_events)(struct hisi_hba *hisi_hba, int phy_no);
void (*phy_set_linkrate)(struct hisi_hba *hisi_hba, int phy_no,
struct sas_phy_linkrates *linkrates);
enum sas_linkrate (*phy_get_max_linkrate)(void);
@@ -201,6 +211,7 @@
void (*dereg_device)(struct hisi_hba *hisi_hba,
struct domain_device *device);
int (*soft_reset)(struct hisi_hba *hisi_hba);
+ u32 (*get_phys_state)(struct hisi_hba *hisi_hba);
int max_command_entries;
int complete_hdr_size;
};
@@ -390,6 +401,7 @@
extern struct scsi_transport_template *hisi_sas_stt;
extern struct scsi_host_template *hisi_sas_sht;
+extern void hisi_sas_stop_phys(struct hisi_hba *hisi_hba);
extern void hisi_sas_init_add(struct hisi_hba *hisi_hba);
extern int hisi_sas_alloc(struct hisi_hba *hisi_hba, struct Scsi_Host *shost);
extern void hisi_sas_free(struct hisi_hba *hisi_hba);
@@ -408,6 +420,4 @@
struct sas_task *task,
struct hisi_sas_slot *slot);
extern void hisi_sas_init_mem(struct hisi_hba *hisi_hba);
-extern void hisi_sas_rescan_topology(struct hisi_hba *hisi_hba, u32 old_state,
- u32 state);
#endif
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 4022c3f..16664f2 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -61,6 +61,7 @@
case ATA_CMD_WRITE_QUEUED:
case ATA_CMD_WRITE_LOG_DMA_EXT:
case ATA_CMD_WRITE_STREAM_DMA_EXT:
+ case ATA_CMD_ZAC_MGMT_IN:
return HISI_SAS_SATA_PROTOCOL_DMA;
case ATA_CMD_CHK_POWER:
@@ -73,6 +74,7 @@
case ATA_CMD_SET_FEATURES:
case ATA_CMD_STANDBY:
case ATA_CMD_STANDBYNOW1:
+ case ATA_CMD_ZAC_MGMT_OUT:
return HISI_SAS_SATA_PROTOCOL_NONDATA;
default:
if (direction == DMA_NONE)
@@ -125,6 +127,15 @@
}
EXPORT_SYMBOL_GPL(to_hisi_sas_port);
+void hisi_sas_stop_phys(struct hisi_hba *hisi_hba)
+{
+ int phy_no;
+
+ for (phy_no = 0; phy_no < hisi_hba->n_phy; phy_no++)
+ hisi_hba->hw->phy_disable(hisi_hba, phy_no);
+}
+EXPORT_SYMBOL_GPL(hisi_sas_stop_phys);
+
static void hisi_sas_slot_index_clear(struct hisi_hba *hisi_hba, int slot_idx)
{
void *bitmap = hisi_hba->slot_index_tags;
@@ -433,7 +444,7 @@
struct hisi_sas_device *sas_dev = device->lldd_dev;
struct hisi_sas_dq *dq = sas_dev->dq;
- if (unlikely(test_bit(HISI_SAS_RESET_BIT, &hisi_hba->flags)))
+ if (unlikely(test_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags)))
return -EINVAL;
/* protect task_prep and start_delivery sequence */
@@ -716,7 +727,6 @@
struct hisi_sas_device *sas_dev = device->lldd_dev;
struct hisi_hba *hisi_hba = dev_to_hisi_hba(device);
struct device *dev = hisi_hba->dev;
- int dev_id = sas_dev->device_id;
dev_info(dev, "found dev[%d:%x] is gone\n",
sas_dev->device_id, sas_dev->dev_type);
@@ -729,9 +739,7 @@
hisi_hba->hw->free_device(hisi_hba, sas_dev);
device->lldd_dev = NULL;
memset(sas_dev, 0, sizeof(*sas_dev));
- sas_dev->device_id = dev_id;
sas_dev->dev_type = SAS_PHY_UNUSED;
- sas_dev->dev_status = HISI_SAS_DEV_NORMAL;
}
static int hisi_sas_queue_command(struct sas_task *task, gfp_t gfp_flags)
@@ -764,7 +772,12 @@
case PHY_FUNC_SET_LINK_RATE:
hisi_hba->hw->phy_set_linkrate(hisi_hba, phy_no, funcdata);
break;
-
+ case PHY_FUNC_GET_EVENTS:
+ if (hisi_hba->hw->get_events) {
+ hisi_hba->hw->get_events(hisi_hba, phy_no);
+ break;
+ }
+ /* fallthru */
case PHY_FUNC_RELEASE_SPINUP_HOLD:
default:
return -EOPNOTSUPP;
@@ -967,37 +980,117 @@
sizeof(ssp_task), tmf);
}
+static void hisi_sas_refresh_port_id(struct hisi_hba *hisi_hba,
+ struct asd_sas_port *sas_port, enum sas_linkrate linkrate)
+{
+ struct hisi_sas_device *sas_dev;
+ struct domain_device *device;
+ int i;
+
+ for (i = 0; i < HISI_SAS_MAX_DEVICES; i++) {
+ sas_dev = &hisi_hba->devices[i];
+ device = sas_dev->sas_device;
+ if ((sas_dev->dev_type == SAS_PHY_UNUSED)
+ || !device || (device->port != sas_port))
+ continue;
+
+ hisi_hba->hw->free_device(hisi_hba, sas_dev);
+
+ /* Update linkrate of directly attached device. */
+ if (!device->parent)
+ device->linkrate = linkrate;
+
+ hisi_hba->hw->setup_itct(hisi_hba, sas_dev);
+ }
+}
+
+static void hisi_sas_rescan_topology(struct hisi_hba *hisi_hba, u32 old_state,
+ u32 state)
+{
+ struct sas_ha_struct *sas_ha = &hisi_hba->sha;
+ struct asd_sas_port *_sas_port = NULL;
+ int phy_no;
+
+ for (phy_no = 0; phy_no < hisi_hba->n_phy; phy_no++) {
+ struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ struct asd_sas_port *sas_port = sas_phy->port;
+ struct hisi_sas_port *port = to_hisi_sas_port(sas_port);
+ bool do_port_check = !!(_sas_port != sas_port);
+
+ if (!sas_phy->phy->enabled)
+ continue;
+
+ /* Report PHY state change to libsas */
+ if (state & (1 << phy_no)) {
+ if (do_port_check && sas_port) {
+ struct domain_device *dev = sas_port->port_dev;
+
+ _sas_port = sas_port;
+ port->id = phy->port_id;
+ hisi_sas_refresh_port_id(hisi_hba,
+ sas_port, sas_phy->linkrate);
+
+ if (DEV_IS_EXPANDER(dev->dev_type))
+ sas_ha->notify_port_event(sas_phy,
+ PORTE_BROADCAST_RCVD);
+ }
+ } else if (old_state & (1 << phy_no))
+ /* PHY down but was up before */
+ hisi_sas_phy_down(hisi_hba, phy_no, 0);
+
+ }
+
+ drain_workqueue(hisi_hba->shost->work_q);
+}
+
static int hisi_sas_controller_reset(struct hisi_hba *hisi_hba)
{
+ struct sas_ha_struct *sas_ha = &hisi_hba->sha;
+ struct device *dev = hisi_hba->dev;
+ struct Scsi_Host *shost = hisi_hba->shost;
+ u32 old_state, state;
+ unsigned long flags;
int rc;
if (!hisi_hba->hw->soft_reset)
return -1;
- if (!test_and_set_bit(HISI_SAS_RESET_BIT, &hisi_hba->flags)) {
- struct device *dev = hisi_hba->dev;
- struct sas_ha_struct *sas_ha = &hisi_hba->sha;
- unsigned long flags;
-
- dev_dbg(dev, "controller reset begins!\n");
- scsi_block_requests(hisi_hba->shost);
- rc = hisi_hba->hw->soft_reset(hisi_hba);
- if (rc) {
- dev_warn(dev, "controller reset failed (%d)\n", rc);
- goto out;
- }
- spin_lock_irqsave(&hisi_hba->lock, flags);
- hisi_sas_release_tasks(hisi_hba);
- spin_unlock_irqrestore(&hisi_hba->lock, flags);
-
- sas_ha->notify_ha_event(sas_ha, HAE_RESET);
- dev_dbg(dev, "controller reset successful!\n");
- } else
+ if (test_and_set_bit(HISI_SAS_RESET_BIT, &hisi_hba->flags))
return -1;
+ dev_dbg(dev, "controller resetting...\n");
+ old_state = hisi_hba->hw->get_phys_state(hisi_hba);
+
+ scsi_block_requests(shost);
+ set_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags);
+ rc = hisi_hba->hw->soft_reset(hisi_hba);
+ if (rc) {
+ dev_warn(dev, "controller reset failed (%d)\n", rc);
+ clear_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags);
+ goto out;
+ }
+ spin_lock_irqsave(&hisi_hba->lock, flags);
+ hisi_sas_release_tasks(hisi_hba);
+ spin_unlock_irqrestore(&hisi_hba->lock, flags);
+
+ sas_ha->notify_ha_event(sas_ha, HAE_RESET);
+ clear_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags);
+
+ /* Init and wait for PHYs to come up and all libsas event finished. */
+ hisi_hba->hw->phys_init(hisi_hba);
+ msleep(1000);
+ drain_workqueue(hisi_hba->wq);
+ drain_workqueue(shost->work_q);
+
+ state = hisi_hba->hw->get_phys_state(hisi_hba);
+ hisi_sas_rescan_topology(hisi_hba, old_state, state);
+ dev_dbg(dev, "controller reset complete\n");
+
out:
- scsi_unblock_requests(hisi_hba->shost);
+ scsi_unblock_requests(shost);
clear_bit(HISI_SAS_RESET_BIT, &hisi_hba->flags);
+
return rc;
}
@@ -1241,7 +1334,7 @@
int dlvry_queue_slot, dlvry_queue, n_elem = 0, rc, slot_idx;
unsigned long flags, flags_dq;
- if (unlikely(test_bit(HISI_SAS_RESET_BIT, &hisi_hba->flags)))
+ if (unlikely(test_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags)))
return -EINVAL;
if (!device->port)
@@ -1279,12 +1372,21 @@
slot->port = port;
task->lldd_task = slot;
+ slot->buf = dma_pool_alloc(hisi_hba->buffer_pool,
+ GFP_ATOMIC, &slot->buf_dma);
+ if (!slot->buf) {
+ rc = -ENOMEM;
+ goto err_out_tag;
+ }
+
memset(slot->cmd_hdr, 0, sizeof(struct hisi_sas_cmd_hdr));
+ memset(hisi_sas_cmd_hdr_addr_mem(slot), 0, HISI_SAS_COMMAND_TABLE_SZ);
+ memset(hisi_sas_status_buf_addr_mem(slot), 0, HISI_SAS_STATUS_BUF_SZ);
rc = hisi_sas_task_prep_abort(hisi_hba, slot, device_id,
abort_flag, task_tag);
if (rc)
- goto err_out_tag;
+ goto err_out_buf;
list_add_tail(&slot->entry, &sas_dev->list);
@@ -1302,6 +1404,9 @@
return 0;
+err_out_buf:
+ dma_pool_free(hisi_hba->buffer_pool, slot->buf,
+ slot->buf_dma);
err_out_tag:
spin_lock_irqsave(&hisi_hba->lock, flags);
hisi_sas_slot_index_free(hisi_hba, slot_idx);
@@ -1437,36 +1542,6 @@
}
EXPORT_SYMBOL_GPL(hisi_sas_phy_down);
-void hisi_sas_rescan_topology(struct hisi_hba *hisi_hba, u32 old_state,
- u32 state)
-{
- struct sas_ha_struct *sas_ha = &hisi_hba->sha;
- int phy_no;
-
- for (phy_no = 0; phy_no < hisi_hba->n_phy; phy_no++) {
- struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
- struct asd_sas_phy *sas_phy = &phy->sas_phy;
- struct asd_sas_port *sas_port = sas_phy->port;
- struct domain_device *dev;
-
- if (sas_phy->enabled) {
- /* Report PHY state change to libsas */
- if (state & (1 << phy_no))
- continue;
-
- if (old_state & (1 << phy_no))
- /* PHY down but was up before */
- hisi_sas_phy_down(hisi_hba, phy_no, 0);
- }
- if (!sas_port)
- continue;
- dev = sas_port->port_dev;
-
- if (DEV_IS_EXPANDER(dev->dev_type))
- sas_ha->notify_phy_event(sas_phy, PORTE_BROADCAST_RCVD);
- }
-}
-EXPORT_SYMBOL_GPL(hisi_sas_rescan_topology);
struct scsi_transport_template *hisi_sas_stt;
EXPORT_SYMBOL_GPL(hisi_sas_stt);
@@ -1487,7 +1562,7 @@
.max_sectors = SCSI_DEFAULT_MAX_SECTORS,
.use_clustering = ENABLE_CLUSTERING,
.eh_device_reset_handler = sas_eh_device_reset_handler,
- .eh_bus_reset_handler = sas_eh_bus_reset_handler,
+ .eh_target_reset_handler = sas_eh_target_reset_handler,
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
};
@@ -1825,7 +1900,7 @@
return shost;
err_out:
- kfree(shost);
+ scsi_host_put(shost);
dev_err(dev, "shost alloc failed\n");
return NULL;
}
@@ -1916,7 +1991,7 @@
scsi_remove_host(shost);
err_out_ha:
hisi_sas_free(hisi_hba);
- kfree(shost);
+ scsi_host_put(shost);
return rc;
}
EXPORT_SYMBOL_GPL(hisi_sas_probe);
@@ -1931,15 +2006,13 @@
sas_remove_host(sha->core.shost);
hisi_sas_free(hisi_hba);
- kfree(shost);
+ scsi_host_put(shost);
return 0;
}
EXPORT_SYMBOL_GPL(hisi_sas_remove);
static __init int hisi_sas_init(void)
{
- pr_info("hisi_sas: driver version %s\n", DRV_VERSION);
-
hisi_sas_stt = sas_domain_attach_transport(&hisi_sas_transport_ops);
if (!hisi_sas_stt)
return -ENOMEM;
@@ -1955,7 +2028,6 @@
module_init(hisi_sas_init);
module_exit(hisi_sas_exit);
-MODULE_VERSION(DRV_VERSION);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("John Garry <john.garry@huawei.com>");
MODULE_DESCRIPTION("HISILICON SAS controller driver");
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 2bfea70..779af97 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -256,6 +256,8 @@
#define LINK_DFX2_RCVR_HOLD_STS_MSK (0x1 << LINK_DFX2_RCVR_HOLD_STS_OFF)
#define LINK_DFX2_SEND_HOLD_STS_OFF 10
#define LINK_DFX2_SEND_HOLD_STS_MSK (0x1 << LINK_DFX2_SEND_HOLD_STS_OFF)
+#define SAS_ERR_CNT4_REG (PORT_BASE + 0x290)
+#define SAS_ERR_CNT6_REG (PORT_BASE + 0x298)
#define PHY_CTRL_RDY_MSK (PORT_BASE + 0x2b0)
#define PHYCTRL_NOT_RDY_MSK (PORT_BASE + 0x2b4)
#define PHYCTRL_DWS_RESET_MSK (PORT_BASE + 0x2b8)
@@ -399,6 +401,172 @@
__le32 dma_rx_err_type;
};
+static const struct hisi_sas_hw_error one_bit_ecc_errors[] = {
+ {
+ .irq_msk = BIT(SAS_ECC_INTR_DQE_ECC_1B_OFF),
+ .msk = HGC_DQE_ECC_1B_ADDR_MSK,
+ .shift = HGC_DQE_ECC_1B_ADDR_OFF,
+ .msg = "hgc_dqe_acc1b_intr found: \
+ Ram address is 0x%08X\n",
+ .reg = HGC_DQE_ECC_ADDR,
+ },
+ {
+ .irq_msk = BIT(SAS_ECC_INTR_IOST_ECC_1B_OFF),
+ .msk = HGC_IOST_ECC_1B_ADDR_MSK,
+ .shift = HGC_IOST_ECC_1B_ADDR_OFF,
+ .msg = "hgc_iost_acc1b_intr found: \
+ Ram address is 0x%08X\n",
+ .reg = HGC_IOST_ECC_ADDR,
+ },
+ {
+ .irq_msk = BIT(SAS_ECC_INTR_ITCT_ECC_1B_OFF),
+ .msk = HGC_ITCT_ECC_1B_ADDR_MSK,
+ .shift = HGC_ITCT_ECC_1B_ADDR_OFF,
+ .msg = "hgc_itct_acc1b_intr found: \
+ Ram address is 0x%08X\n",
+ .reg = HGC_ITCT_ECC_ADDR,
+ },
+ {
+ .irq_msk = BIT(SAS_ECC_INTR_IOSTLIST_ECC_1B_OFF),
+ .msk = HGC_LM_DFX_STATUS2_IOSTLIST_MSK,
+ .shift = HGC_LM_DFX_STATUS2_IOSTLIST_OFF,
+ .msg = "hgc_iostl_acc1b_intr found: \
+ memory address is 0x%08X\n",
+ .reg = HGC_LM_DFX_STATUS2,
+ },
+ {
+ .irq_msk = BIT(SAS_ECC_INTR_ITCTLIST_ECC_1B_OFF),
+ .msk = HGC_LM_DFX_STATUS2_ITCTLIST_MSK,
+ .shift = HGC_LM_DFX_STATUS2_ITCTLIST_OFF,
+ .msg = "hgc_itctl_acc1b_intr found: \
+ memory address is 0x%08X\n",
+ .reg = HGC_LM_DFX_STATUS2,
+ },
+ {
+ .irq_msk = BIT(SAS_ECC_INTR_CQE_ECC_1B_OFF),
+ .msk = HGC_CQE_ECC_1B_ADDR_MSK,
+ .shift = HGC_CQE_ECC_1B_ADDR_OFF,
+ .msg = "hgc_cqe_acc1b_intr found: \
+ Ram address is 0x%08X\n",
+ .reg = HGC_CQE_ECC_ADDR,
+ },
+ {
+ .irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM0_ECC_1B_OFF),
+ .msk = HGC_RXM_DFX_STATUS14_MEM0_MSK,
+ .shift = HGC_RXM_DFX_STATUS14_MEM0_OFF,
+ .msg = "rxm_mem0_acc1b_intr found: \
+ memory address is 0x%08X\n",
+ .reg = HGC_RXM_DFX_STATUS14,
+ },
+ {
+ .irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM1_ECC_1B_OFF),
+ .msk = HGC_RXM_DFX_STATUS14_MEM1_MSK,
+ .shift = HGC_RXM_DFX_STATUS14_MEM1_OFF,
+ .msg = "rxm_mem1_acc1b_intr found: \
+ memory address is 0x%08X\n",
+ .reg = HGC_RXM_DFX_STATUS14,
+ },
+ {
+ .irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM2_ECC_1B_OFF),
+ .msk = HGC_RXM_DFX_STATUS14_MEM2_MSK,
+ .shift = HGC_RXM_DFX_STATUS14_MEM2_OFF,
+ .msg = "rxm_mem2_acc1b_intr found: \
+ memory address is 0x%08X\n",
+ .reg = HGC_RXM_DFX_STATUS14,
+ },
+ {
+ .irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM3_ECC_1B_OFF),
+ .msk = HGC_RXM_DFX_STATUS15_MEM3_MSK,
+ .shift = HGC_RXM_DFX_STATUS15_MEM3_OFF,
+ .msg = "rxm_mem3_acc1b_intr found: \
+ memory address is 0x%08X\n",
+ .reg = HGC_RXM_DFX_STATUS15,
+ },
+};
+
+static const struct hisi_sas_hw_error multi_bit_ecc_errors[] = {
+ {
+ .irq_msk = BIT(SAS_ECC_INTR_DQE_ECC_MB_OFF),
+ .msk = HGC_DQE_ECC_MB_ADDR_MSK,
+ .shift = HGC_DQE_ECC_MB_ADDR_OFF,
+ .msg = "hgc_dqe_accbad_intr (0x%x) found: \
+ Ram address is 0x%08X\n",
+ .reg = HGC_DQE_ECC_ADDR,
+ },
+ {
+ .irq_msk = BIT(SAS_ECC_INTR_IOST_ECC_MB_OFF),
+ .msk = HGC_IOST_ECC_MB_ADDR_MSK,
+ .shift = HGC_IOST_ECC_MB_ADDR_OFF,
+ .msg = "hgc_iost_accbad_intr (0x%x) found: \
+ Ram address is 0x%08X\n",
+ .reg = HGC_IOST_ECC_ADDR,
+ },
+ {
+ .irq_msk = BIT(SAS_ECC_INTR_ITCT_ECC_MB_OFF),
+ .msk = HGC_ITCT_ECC_MB_ADDR_MSK,
+ .shift = HGC_ITCT_ECC_MB_ADDR_OFF,
+ .msg = "hgc_itct_accbad_intr (0x%x) found: \
+ Ram address is 0x%08X\n",
+ .reg = HGC_ITCT_ECC_ADDR,
+ },
+ {
+ .irq_msk = BIT(SAS_ECC_INTR_IOSTLIST_ECC_MB_OFF),
+ .msk = HGC_LM_DFX_STATUS2_IOSTLIST_MSK,
+ .shift = HGC_LM_DFX_STATUS2_IOSTLIST_OFF,
+ .msg = "hgc_iostl_accbad_intr (0x%x) found: \
+ memory address is 0x%08X\n",
+ .reg = HGC_LM_DFX_STATUS2,
+ },
+ {
+ .irq_msk = BIT(SAS_ECC_INTR_ITCTLIST_ECC_MB_OFF),
+ .msk = HGC_LM_DFX_STATUS2_ITCTLIST_MSK,
+ .shift = HGC_LM_DFX_STATUS2_ITCTLIST_OFF,
+ .msg = "hgc_itctl_accbad_intr (0x%x) found: \
+ memory address is 0x%08X\n",
+ .reg = HGC_LM_DFX_STATUS2,
+ },
+ {
+ .irq_msk = BIT(SAS_ECC_INTR_CQE_ECC_MB_OFF),
+ .msk = HGC_CQE_ECC_MB_ADDR_MSK,
+ .shift = HGC_CQE_ECC_MB_ADDR_OFF,
+ .msg = "hgc_cqe_accbad_intr (0x%x) found: \
+ Ram address is 0x%08X\n",
+ .reg = HGC_CQE_ECC_ADDR,
+ },
+ {
+ .irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM0_ECC_MB_OFF),
+ .msk = HGC_RXM_DFX_STATUS14_MEM0_MSK,
+ .shift = HGC_RXM_DFX_STATUS14_MEM0_OFF,
+ .msg = "rxm_mem0_accbad_intr (0x%x) found: \
+ memory address is 0x%08X\n",
+ .reg = HGC_RXM_DFX_STATUS14,
+ },
+ {
+ .irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM1_ECC_MB_OFF),
+ .msk = HGC_RXM_DFX_STATUS14_MEM1_MSK,
+ .shift = HGC_RXM_DFX_STATUS14_MEM1_OFF,
+ .msg = "rxm_mem1_accbad_intr (0x%x) found: \
+ memory address is 0x%08X\n",
+ .reg = HGC_RXM_DFX_STATUS14,
+ },
+ {
+ .irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM2_ECC_MB_OFF),
+ .msk = HGC_RXM_DFX_STATUS14_MEM2_MSK,
+ .shift = HGC_RXM_DFX_STATUS14_MEM2_OFF,
+ .msg = "rxm_mem2_accbad_intr (0x%x) found: \
+ memory address is 0x%08X\n",
+ .reg = HGC_RXM_DFX_STATUS14,
+ },
+ {
+ .irq_msk = BIT(SAS_ECC_INTR_NCQ_MEM3_ECC_MB_OFF),
+ .msk = HGC_RXM_DFX_STATUS15_MEM3_MSK,
+ .shift = HGC_RXM_DFX_STATUS15_MEM3_OFF,
+ .msg = "rxm_mem3_accbad_intr (0x%x) found: \
+ memory address is 0x%08X\n",
+ .reg = HGC_RXM_DFX_STATUS15,
+ },
+};
+
enum {
HISI_SAS_PHY_PHY_UPDOWN,
HISI_SAS_PHY_CHNL_INT,
@@ -806,12 +974,14 @@
static void free_device_v2_hw(struct hisi_hba *hisi_hba,
struct hisi_sas_device *sas_dev)
{
+ DECLARE_COMPLETION_ONSTACK(completion);
u64 dev_id = sas_dev->device_id;
- struct device *dev = hisi_hba->dev;
struct hisi_sas_itct *itct = &hisi_hba->itct[dev_id];
u32 reg_val = hisi_sas_read32(hisi_hba, ENT_INT_SRC3);
int i;
+ sas_dev->completion = &completion;
+
/* SoC bug workaround */
if (dev_is_sata(sas_dev->sas_device))
clear_bit(sas_dev->sata_idx, hisi_hba->sata_dev_bitmap);
@@ -821,28 +991,12 @@
hisi_sas_write32(hisi_hba, ENT_INT_SRC3,
ENT_INT_SRC3_ITC_INT_MSK);
- /* clear the itct int*/
for (i = 0; i < 2; i++) {
- /* clear the itct table*/
- reg_val = hisi_sas_read32(hisi_hba, ITCT_CLR);
- reg_val |= ITCT_CLR_EN_MSK | (dev_id & ITCT_DEV_MSK);
+ reg_val = ITCT_CLR_EN_MSK | (dev_id & ITCT_DEV_MSK);
hisi_sas_write32(hisi_hba, ITCT_CLR, reg_val);
+ wait_for_completion(sas_dev->completion);
- udelay(10);
- reg_val = hisi_sas_read32(hisi_hba, ENT_INT_SRC3);
- if (ENT_INT_SRC3_ITC_INT_MSK & reg_val) {
- dev_dbg(dev, "got clear ITCT done interrupt\n");
-
- /* invalid the itct state*/
- memset(itct, 0, sizeof(struct hisi_sas_itct));
- hisi_sas_write32(hisi_hba, ENT_INT_SRC3,
- ENT_INT_SRC3_ITC_INT_MSK);
-
- /* clear the itct */
- hisi_sas_write32(hisi_hba, ITCT_CLR, 0);
- dev_dbg(dev, "clear ITCT ok\n");
- break;
- }
+ memset(itct, 0, sizeof(struct hisi_sas_itct));
}
}
@@ -1023,7 +1177,7 @@
hisi_sas_write32(hisi_hba, ENT_INT_SRC3, 0xffffffff);
hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1, 0x7efefefe);
hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK2, 0x7efefefe);
- hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, 0x7ffffffe);
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, 0x7ffe20fe);
hisi_sas_write32(hisi_hba, SAS_ECC_INTR_MSK, 0xfff00c30);
for (i = 0; i < hisi_hba->queue_count; i++)
hisi_sas_write32(hisi_hba, OQ0_INT_SRC_MSK+0x4*i, 0);
@@ -1332,25 +1486,12 @@
enable_phy_v2_hw(hisi_hba, phy_no);
}
-static void stop_phy_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
-{
- disable_phy_v2_hw(hisi_hba, phy_no);
-}
-
-static void stop_phys_v2_hw(struct hisi_hba *hisi_hba)
-{
- int i;
-
- for (i = 0; i < hisi_hba->n_phy; i++)
- stop_phy_v2_hw(hisi_hba, i);
-}
-
static void phy_hard_reset_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
{
struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
u32 txid_auto;
- stop_phy_v2_hw(hisi_hba, phy_no);
+ disable_phy_v2_hw(hisi_hba, phy_no);
if (phy->identify.device_type == SAS_END_DEVICE) {
txid_auto = hisi_sas_phy_read32(hisi_hba, phy_no, TXID_AUTO);
hisi_sas_phy_write32(hisi_hba, phy_no, TXID_AUTO,
@@ -1360,17 +1501,38 @@
start_phy_v2_hw(hisi_hba, phy_no);
}
-static void start_phys_v2_hw(struct hisi_hba *hisi_hba)
+static void phy_get_events_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
{
- int i;
+ struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ struct sas_phy *sphy = sas_phy->phy;
+ u32 err4_reg_val, err6_reg_val;
- for (i = 0; i < hisi_hba->n_phy; i++)
- start_phy_v2_hw(hisi_hba, i);
+ /* loss dword syn, phy reset problem */
+ err4_reg_val = hisi_sas_phy_read32(hisi_hba, phy_no, SAS_ERR_CNT4_REG);
+
+ /* disparity err, invalid dword */
+ err6_reg_val = hisi_sas_phy_read32(hisi_hba, phy_no, SAS_ERR_CNT6_REG);
+
+ sphy->loss_of_dword_sync_count += (err4_reg_val >> 16) & 0xFFFF;
+ sphy->phy_reset_problem_count += err4_reg_val & 0xFFFF;
+ sphy->invalid_dword_count += (err6_reg_val & 0xFF0000) >> 16;
+ sphy->running_disparity_error_count += err6_reg_val & 0xFF;
}
static void phys_init_v2_hw(struct hisi_hba *hisi_hba)
{
- start_phys_v2_hw(hisi_hba);
+ int i;
+
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ struct hisi_sas_phy *phy = &hisi_hba->phy[i];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+
+ if (!sas_phy->phy->enabled)
+ continue;
+
+ start_phy_v2_hw(hisi_hba, i);
+ }
}
static void sl_notify_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
@@ -1965,7 +2127,7 @@
}
case DMA_RX_DATA_LEN_UNDERFLOW:
{
- ts->residual = dma_rx_err_type;
+ ts->residual = trans_tx_fail_type;
ts->stat = SAS_DATA_UNDERRUN;
break;
}
@@ -2091,7 +2253,7 @@
}
case DMA_RX_DATA_LEN_UNDERFLOW:
{
- ts->residual = dma_rx_err_type;
+ ts->residual = trans_tx_fail_type;
ts->stat = SAS_DATA_UNDERRUN;
break;
}
@@ -2599,6 +2761,7 @@
struct hisi_hba *hisi_hba = p;
u32 irq_msk;
int phy_no = 0;
+ irqreturn_t res = IRQ_NONE;
irq_msk = (hisi_sas_read32(hisi_hba, HGC_INVLD_DQE_INFO)
>> HGC_INVLD_DQE_INFO_FB_CH0_OFF) & 0x1ff;
@@ -2613,15 +2776,15 @@
case CHL_INT0_SL_PHY_ENABLE_MSK:
/* phy up */
if (phy_up_v2_hw(phy_no, hisi_hba) ==
- IRQ_NONE)
- return IRQ_NONE;
+ IRQ_HANDLED)
+ res = IRQ_HANDLED;
break;
case CHL_INT0_NOT_RDY_MSK:
/* phy down */
if (phy_down_v2_hw(phy_no, hisi_hba) ==
- IRQ_NONE)
- return IRQ_NONE;
+ IRQ_HANDLED)
+ res = IRQ_HANDLED;
break;
case (CHL_INT0_NOT_RDY_MSK |
@@ -2631,13 +2794,13 @@
if (reg_value & BIT(phy_no)) {
/* phy up */
if (phy_up_v2_hw(phy_no, hisi_hba) ==
- IRQ_NONE)
- return IRQ_NONE;
+ IRQ_HANDLED)
+ res = IRQ_HANDLED;
} else {
/* phy down */
if (phy_down_v2_hw(phy_no, hisi_hba) ==
- IRQ_NONE)
- return IRQ_NONE;
+ IRQ_HANDLED)
+ res = IRQ_HANDLED;
}
break;
@@ -2650,7 +2813,7 @@
phy_no++;
}
- return IRQ_HANDLED;
+ return res;
}
static void phy_bcast_v2_hw(int phy_no, struct hisi_hba *hisi_hba)
@@ -2733,194 +2896,38 @@
one_bit_ecc_error_process_v2_hw(struct hisi_hba *hisi_hba, u32 irq_value)
{
struct device *dev = hisi_hba->dev;
- u32 reg_val;
+ const struct hisi_sas_hw_error *ecc_error;
+ u32 val;
+ int i;
- if (irq_value & BIT(SAS_ECC_INTR_DQE_ECC_1B_OFF)) {
- reg_val = hisi_sas_read32(hisi_hba, HGC_DQE_ECC_ADDR);
- dev_warn(dev, "hgc_dqe_acc1b_intr found: \
- Ram address is 0x%08X\n",
- (reg_val & HGC_DQE_ECC_1B_ADDR_MSK) >>
- HGC_DQE_ECC_1B_ADDR_OFF);
+ for (i = 0; i < ARRAY_SIZE(one_bit_ecc_errors); i++) {
+ ecc_error = &one_bit_ecc_errors[i];
+ if (irq_value & ecc_error->irq_msk) {
+ val = hisi_sas_read32(hisi_hba, ecc_error->reg);
+ val &= ecc_error->msk;
+ val >>= ecc_error->shift;
+ dev_warn(dev, ecc_error->msg, val);
+ }
}
-
- if (irq_value & BIT(SAS_ECC_INTR_IOST_ECC_1B_OFF)) {
- reg_val = hisi_sas_read32(hisi_hba, HGC_IOST_ECC_ADDR);
- dev_warn(dev, "hgc_iost_acc1b_intr found: \
- Ram address is 0x%08X\n",
- (reg_val & HGC_IOST_ECC_1B_ADDR_MSK) >>
- HGC_IOST_ECC_1B_ADDR_OFF);
- }
-
- if (irq_value & BIT(SAS_ECC_INTR_ITCT_ECC_1B_OFF)) {
- reg_val = hisi_sas_read32(hisi_hba, HGC_ITCT_ECC_ADDR);
- dev_warn(dev, "hgc_itct_acc1b_intr found: \
- Ram address is 0x%08X\n",
- (reg_val & HGC_ITCT_ECC_1B_ADDR_MSK) >>
- HGC_ITCT_ECC_1B_ADDR_OFF);
- }
-
- if (irq_value & BIT(SAS_ECC_INTR_IOSTLIST_ECC_1B_OFF)) {
- reg_val = hisi_sas_read32(hisi_hba, HGC_LM_DFX_STATUS2);
- dev_warn(dev, "hgc_iostl_acc1b_intr found: \
- memory address is 0x%08X\n",
- (reg_val & HGC_LM_DFX_STATUS2_IOSTLIST_MSK) >>
- HGC_LM_DFX_STATUS2_IOSTLIST_OFF);
- }
-
- if (irq_value & BIT(SAS_ECC_INTR_ITCTLIST_ECC_1B_OFF)) {
- reg_val = hisi_sas_read32(hisi_hba, HGC_LM_DFX_STATUS2);
- dev_warn(dev, "hgc_itctl_acc1b_intr found: \
- memory address is 0x%08X\n",
- (reg_val & HGC_LM_DFX_STATUS2_ITCTLIST_MSK) >>
- HGC_LM_DFX_STATUS2_ITCTLIST_OFF);
- }
-
- if (irq_value & BIT(SAS_ECC_INTR_CQE_ECC_1B_OFF)) {
- reg_val = hisi_sas_read32(hisi_hba, HGC_CQE_ECC_ADDR);
- dev_warn(dev, "hgc_cqe_acc1b_intr found: \
- Ram address is 0x%08X\n",
- (reg_val & HGC_CQE_ECC_1B_ADDR_MSK) >>
- HGC_CQE_ECC_1B_ADDR_OFF);
- }
-
- if (irq_value & BIT(SAS_ECC_INTR_NCQ_MEM0_ECC_1B_OFF)) {
- reg_val = hisi_sas_read32(hisi_hba, HGC_RXM_DFX_STATUS14);
- dev_warn(dev, "rxm_mem0_acc1b_intr found: \
- memory address is 0x%08X\n",
- (reg_val & HGC_RXM_DFX_STATUS14_MEM0_MSK) >>
- HGC_RXM_DFX_STATUS14_MEM0_OFF);
- }
-
- if (irq_value & BIT(SAS_ECC_INTR_NCQ_MEM1_ECC_1B_OFF)) {
- reg_val = hisi_sas_read32(hisi_hba, HGC_RXM_DFX_STATUS14);
- dev_warn(dev, "rxm_mem1_acc1b_intr found: \
- memory address is 0x%08X\n",
- (reg_val & HGC_RXM_DFX_STATUS14_MEM1_MSK) >>
- HGC_RXM_DFX_STATUS14_MEM1_OFF);
- }
-
- if (irq_value & BIT(SAS_ECC_INTR_NCQ_MEM2_ECC_1B_OFF)) {
- reg_val = hisi_sas_read32(hisi_hba, HGC_RXM_DFX_STATUS14);
- dev_warn(dev, "rxm_mem2_acc1b_intr found: \
- memory address is 0x%08X\n",
- (reg_val & HGC_RXM_DFX_STATUS14_MEM2_MSK) >>
- HGC_RXM_DFX_STATUS14_MEM2_OFF);
- }
-
- if (irq_value & BIT(SAS_ECC_INTR_NCQ_MEM3_ECC_1B_OFF)) {
- reg_val = hisi_sas_read32(hisi_hba, HGC_RXM_DFX_STATUS15);
- dev_warn(dev, "rxm_mem3_acc1b_intr found: \
- memory address is 0x%08X\n",
- (reg_val & HGC_RXM_DFX_STATUS15_MEM3_MSK) >>
- HGC_RXM_DFX_STATUS15_MEM3_OFF);
- }
-
}
static void multi_bit_ecc_error_process_v2_hw(struct hisi_hba *hisi_hba,
u32 irq_value)
{
- u32 reg_val;
struct device *dev = hisi_hba->dev;
+ const struct hisi_sas_hw_error *ecc_error;
+ u32 val;
+ int i;
- if (irq_value & BIT(SAS_ECC_INTR_DQE_ECC_MB_OFF)) {
- reg_val = hisi_sas_read32(hisi_hba, HGC_DQE_ECC_ADDR);
- dev_warn(dev, "hgc_dqe_accbad_intr (0x%x) found: \
- Ram address is 0x%08X\n",
- irq_value,
- (reg_val & HGC_DQE_ECC_MB_ADDR_MSK) >>
- HGC_DQE_ECC_MB_ADDR_OFF);
- queue_work(hisi_hba->wq, &hisi_hba->rst_work);
- }
-
- if (irq_value & BIT(SAS_ECC_INTR_IOST_ECC_MB_OFF)) {
- reg_val = hisi_sas_read32(hisi_hba, HGC_IOST_ECC_ADDR);
- dev_warn(dev, "hgc_iost_accbad_intr (0x%x) found: \
- Ram address is 0x%08X\n",
- irq_value,
- (reg_val & HGC_IOST_ECC_MB_ADDR_MSK) >>
- HGC_IOST_ECC_MB_ADDR_OFF);
- queue_work(hisi_hba->wq, &hisi_hba->rst_work);
- }
-
- if (irq_value & BIT(SAS_ECC_INTR_ITCT_ECC_MB_OFF)) {
- reg_val = hisi_sas_read32(hisi_hba, HGC_ITCT_ECC_ADDR);
- dev_warn(dev,"hgc_itct_accbad_intr (0x%x) found: \
- Ram address is 0x%08X\n",
- irq_value,
- (reg_val & HGC_ITCT_ECC_MB_ADDR_MSK) >>
- HGC_ITCT_ECC_MB_ADDR_OFF);
- queue_work(hisi_hba->wq, &hisi_hba->rst_work);
- }
-
- if (irq_value & BIT(SAS_ECC_INTR_IOSTLIST_ECC_MB_OFF)) {
- reg_val = hisi_sas_read32(hisi_hba, HGC_LM_DFX_STATUS2);
- dev_warn(dev, "hgc_iostl_accbad_intr (0x%x) found: \
- memory address is 0x%08X\n",
- irq_value,
- (reg_val & HGC_LM_DFX_STATUS2_IOSTLIST_MSK) >>
- HGC_LM_DFX_STATUS2_IOSTLIST_OFF);
- queue_work(hisi_hba->wq, &hisi_hba->rst_work);
- }
-
- if (irq_value & BIT(SAS_ECC_INTR_ITCTLIST_ECC_MB_OFF)) {
- reg_val = hisi_sas_read32(hisi_hba, HGC_LM_DFX_STATUS2);
- dev_warn(dev, "hgc_itctl_accbad_intr (0x%x) found: \
- memory address is 0x%08X\n",
- irq_value,
- (reg_val & HGC_LM_DFX_STATUS2_ITCTLIST_MSK) >>
- HGC_LM_DFX_STATUS2_ITCTLIST_OFF);
- queue_work(hisi_hba->wq, &hisi_hba->rst_work);
- }
-
- if (irq_value & BIT(SAS_ECC_INTR_CQE_ECC_MB_OFF)) {
- reg_val = hisi_sas_read32(hisi_hba, HGC_CQE_ECC_ADDR);
- dev_warn(dev, "hgc_cqe_accbad_intr (0x%x) found: \
- Ram address is 0x%08X\n",
- irq_value,
- (reg_val & HGC_CQE_ECC_MB_ADDR_MSK) >>
- HGC_CQE_ECC_MB_ADDR_OFF);
- queue_work(hisi_hba->wq, &hisi_hba->rst_work);
- }
-
- if (irq_value & BIT(SAS_ECC_INTR_NCQ_MEM0_ECC_MB_OFF)) {
- reg_val = hisi_sas_read32(hisi_hba, HGC_RXM_DFX_STATUS14);
- dev_warn(dev, "rxm_mem0_accbad_intr (0x%x) found: \
- memory address is 0x%08X\n",
- irq_value,
- (reg_val & HGC_RXM_DFX_STATUS14_MEM0_MSK) >>
- HGC_RXM_DFX_STATUS14_MEM0_OFF);
- queue_work(hisi_hba->wq, &hisi_hba->rst_work);
- }
-
- if (irq_value & BIT(SAS_ECC_INTR_NCQ_MEM1_ECC_MB_OFF)) {
- reg_val = hisi_sas_read32(hisi_hba, HGC_RXM_DFX_STATUS14);
- dev_warn(dev, "rxm_mem1_accbad_intr (0x%x) found: \
- memory address is 0x%08X\n",
- irq_value,
- (reg_val & HGC_RXM_DFX_STATUS14_MEM1_MSK) >>
- HGC_RXM_DFX_STATUS14_MEM1_OFF);
- queue_work(hisi_hba->wq, &hisi_hba->rst_work);
- }
-
- if (irq_value & BIT(SAS_ECC_INTR_NCQ_MEM2_ECC_MB_OFF)) {
- reg_val = hisi_sas_read32(hisi_hba, HGC_RXM_DFX_STATUS14);
- dev_warn(dev, "rxm_mem2_accbad_intr (0x%x) found: \
- memory address is 0x%08X\n",
- irq_value,
- (reg_val & HGC_RXM_DFX_STATUS14_MEM2_MSK) >>
- HGC_RXM_DFX_STATUS14_MEM2_OFF);
- queue_work(hisi_hba->wq, &hisi_hba->rst_work);
- }
-
- if (irq_value & BIT(SAS_ECC_INTR_NCQ_MEM3_ECC_MB_OFF)) {
- reg_val = hisi_sas_read32(hisi_hba, HGC_RXM_DFX_STATUS15);
- dev_warn(dev, "rxm_mem3_accbad_intr (0x%x) found: \
- memory address is 0x%08X\n",
- irq_value,
- (reg_val & HGC_RXM_DFX_STATUS15_MEM3_MSK) >>
- HGC_RXM_DFX_STATUS15_MEM3_OFF);
- queue_work(hisi_hba->wq, &hisi_hba->rst_work);
+ for (i = 0; i < ARRAY_SIZE(multi_bit_ecc_errors); i++) {
+ ecc_error = &multi_bit_ecc_errors[i];
+ if (irq_value & ecc_error->irq_msk) {
+ val = hisi_sas_read32(hisi_hba, ecc_error->reg);
+ val &= ecc_error->msk;
+ val >>= ecc_error->shift;
+ dev_warn(dev, ecc_error->msg, irq_value, val);
+ queue_work(hisi_hba->wq, &hisi_hba->rst_work);
+ }
}
return;
@@ -3053,8 +3060,20 @@
irq_value);
queue_work(hisi_hba->wq, &hisi_hba->rst_work);
}
+
+ if (irq_value & BIT(ENT_INT_SRC3_ITC_INT_OFF)) {
+ u32 reg_val = hisi_sas_read32(hisi_hba, ITCT_CLR);
+ u32 dev_id = reg_val & ITCT_DEV_MSK;
+ struct hisi_sas_device *sas_dev =
+ &hisi_hba->devices[dev_id];
+
+ hisi_sas_write32(hisi_hba, ITCT_CLR, 0);
+ dev_dbg(dev, "clear ITCT ok\n");
+ complete(sas_dev->completion);
+ }
}
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC3, irq_value);
hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, irq_msk);
return IRQ_HANDLED;
@@ -3251,97 +3270,92 @@
{
struct platform_device *pdev = hisi_hba->platform_dev;
struct device *dev = &pdev->dev;
- int i, irq, rc, irq_map[128];
-
+ int irq, rc, irq_map[128];
+ int i, phy_no, fatal_no, queue_no, k;
for (i = 0; i < 128; i++)
irq_map[i] = platform_get_irq(pdev, i);
for (i = 0; i < HISI_SAS_PHY_INT_NR; i++) {
- int idx = i;
-
- irq = irq_map[idx + 1]; /* Phy up/down is irq1 */
- if (!irq) {
- dev_err(dev, "irq init: fail map phy interrupt %d\n",
- idx);
- return -ENOENT;
- }
-
+ irq = irq_map[i + 1]; /* Phy up/down is irq1 */
rc = devm_request_irq(dev, irq, phy_interrupts[i], 0,
DRV_NAME " phy", hisi_hba);
if (rc) {
dev_err(dev, "irq init: could not request "
"phy interrupt %d, rc=%d\n",
irq, rc);
- return -ENOENT;
+ rc = -ENOENT;
+ goto free_phy_int_irqs;
}
}
- for (i = 0; i < hisi_hba->n_phy; i++) {
- struct hisi_sas_phy *phy = &hisi_hba->phy[i];
- int idx = i + 72; /* First SATA interrupt is irq72 */
+ for (phy_no = 0; phy_no < hisi_hba->n_phy; phy_no++) {
+ struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
- irq = irq_map[idx];
- if (!irq) {
- dev_err(dev, "irq init: fail map phy interrupt %d\n",
- idx);
- return -ENOENT;
- }
-
+ irq = irq_map[phy_no + 72];
rc = devm_request_irq(dev, irq, sata_int_v2_hw, 0,
DRV_NAME " sata", phy);
if (rc) {
dev_err(dev, "irq init: could not request "
"sata interrupt %d, rc=%d\n",
irq, rc);
- return -ENOENT;
+ rc = -ENOENT;
+ goto free_sata_int_irqs;
}
}
- for (i = 0; i < HISI_SAS_FATAL_INT_NR; i++) {
- int idx = i;
-
- irq = irq_map[idx + 81];
- if (!irq) {
- dev_err(dev, "irq init: fail map fatal interrupt %d\n",
- idx);
- return -ENOENT;
- }
-
- rc = devm_request_irq(dev, irq, fatal_interrupts[i], 0,
+ for (fatal_no = 0; fatal_no < HISI_SAS_FATAL_INT_NR; fatal_no++) {
+ irq = irq_map[fatal_no + 81];
+ rc = devm_request_irq(dev, irq, fatal_interrupts[fatal_no], 0,
DRV_NAME " fatal", hisi_hba);
if (rc) {
dev_err(dev,
"irq init: could not request fatal interrupt %d, rc=%d\n",
irq, rc);
- return -ENOENT;
+ rc = -ENOENT;
+ goto free_fatal_int_irqs;
}
}
- for (i = 0; i < hisi_hba->queue_count; i++) {
- int idx = i + 96; /* First cq interrupt is irq96 */
- struct hisi_sas_cq *cq = &hisi_hba->cq[i];
+ for (queue_no = 0; queue_no < hisi_hba->queue_count; queue_no++) {
+ struct hisi_sas_cq *cq = &hisi_hba->cq[queue_no];
struct tasklet_struct *t = &cq->tasklet;
- irq = irq_map[idx];
- if (!irq) {
- dev_err(dev,
- "irq init: could not map cq interrupt %d\n",
- idx);
- return -ENOENT;
- }
+ irq = irq_map[queue_no + 96];
rc = devm_request_irq(dev, irq, cq_interrupt_v2_hw, 0,
- DRV_NAME " cq", &hisi_hba->cq[i]);
+ DRV_NAME " cq", cq);
if (rc) {
dev_err(dev,
"irq init: could not request cq interrupt %d, rc=%d\n",
irq, rc);
- return -ENOENT;
+ rc = -ENOENT;
+ goto free_cq_int_irqs;
}
tasklet_init(t, cq_tasklet_v2_hw, (unsigned long)cq);
}
return 0;
+
+free_cq_int_irqs:
+ for (k = 0; k < queue_no; k++) {
+ struct hisi_sas_cq *cq = &hisi_hba->cq[k];
+
+ free_irq(irq_map[k + 96], cq);
+ tasklet_kill(&cq->tasklet);
+ }
+free_fatal_int_irqs:
+ for (k = 0; k < fatal_no; k++)
+ free_irq(irq_map[k + 81], hisi_hba);
+free_sata_int_irqs:
+ for (k = 0; k < phy_no; k++) {
+ struct hisi_sas_phy *phy = &hisi_hba->phy[k];
+
+ free_irq(irq_map[k + 72], phy);
+ }
+free_phy_int_irqs:
+ for (k = 0; k < i; k++)
+ free_irq(irq_map[k + 1], hisi_hba);
+ return rc;
}
static int hisi_sas_v2_init(struct hisi_hba *hisi_hba)
@@ -3383,19 +3397,21 @@
synchronize_irq(platform_get_irq(pdev, i));
}
+
+static u32 get_phys_state_v2_hw(struct hisi_hba *hisi_hba)
+{
+ return hisi_sas_read32(hisi_hba, PHY_STATE);
+}
+
static int soft_reset_v2_hw(struct hisi_hba *hisi_hba)
{
struct device *dev = hisi_hba->dev;
- u32 old_state, state;
int rc, cnt;
- int phy_no;
-
- old_state = hisi_sas_read32(hisi_hba, PHY_STATE);
interrupt_disable_v2_hw(hisi_hba);
hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE, 0x0);
- stop_phys_v2_hw(hisi_hba);
+ hisi_sas_stop_phys(hisi_hba);
mdelay(10);
@@ -3425,22 +3441,6 @@
phys_reject_stp_links_v2_hw(hisi_hba);
- /* Re-enable the PHYs */
- for (phy_no = 0; phy_no < hisi_hba->n_phy; phy_no++) {
- struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
- struct asd_sas_phy *sas_phy = &phy->sas_phy;
-
- if (sas_phy->enabled)
- start_phy_v2_hw(hisi_hba, phy_no);
- }
-
- /* Wait for the PHYs to come up and read the PHY state */
- msleep(1000);
-
- state = hisi_sas_read32(hisi_hba, PHY_STATE);
-
- hisi_sas_rescan_topology(hisi_hba, old_state, state);
-
return 0;
}
@@ -3463,11 +3463,13 @@
.phy_enable = enable_phy_v2_hw,
.phy_disable = disable_phy_v2_hw,
.phy_hard_reset = phy_hard_reset_v2_hw,
+ .get_events = phy_get_events_v2_hw,
.phy_set_linkrate = phy_set_linkrate_v2_hw,
.phy_get_max_linkrate = phy_get_max_linkrate_v2_hw,
.max_command_entries = HISI_SAS_COMMAND_ENTRIES_V2_HW,
.complete_hdr_size = sizeof(struct hisi_sas_complete_v2_hdr),
.soft_reset = soft_reset_v2_hw,
+ .get_phys_state = get_phys_state_v2_hw,
};
static int hisi_sas_v2_probe(struct platform_device *pdev)
@@ -3491,10 +3493,17 @@
{
struct sas_ha_struct *sha = platform_get_drvdata(pdev);
struct hisi_hba *hisi_hba = sha->lldd_ha;
+ int i;
if (timer_pending(&hisi_hba->timer))
del_timer(&hisi_hba->timer);
+ for (i = 0; i < hisi_hba->queue_count; i++) {
+ struct hisi_sas_cq *cq = &hisi_hba->cq[i];
+
+ tasklet_kill(&cq->tasklet);
+ }
+
return hisi_sas_remove(pdev);
}
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 83d2dca..2e5fa97 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -23,14 +23,11 @@
#define PHY_STATE 0x24
#define PHY_PORT_NUM_MA 0x28
#define PHY_CONN_RATE 0x30
-#define AXI_AHB_CLK_CFG 0x3c
#define ITCT_CLR 0x44
#define ITCT_CLR_EN_OFF 16
#define ITCT_CLR_EN_MSK (0x1 << ITCT_CLR_EN_OFF)
#define ITCT_DEV_OFF 0
#define ITCT_DEV_MSK (0x7ff << ITCT_DEV_OFF)
-#define AXI_USER1 0x48
-#define AXI_USER2 0x4c
#define IO_SATA_BROKEN_MSG_ADDR_LO 0x58
#define IO_SATA_BROKEN_MSG_ADDR_HI 0x5c
#define SATA_INITI_D2H_STORE_ADDR_LO 0x60
@@ -137,6 +134,7 @@
#define TX_HARDRST_MSK (0x1 << TX_HARDRST_OFF)
#define RX_IDAF_DWORD0 (PORT_BASE + 0xc4)
#define RXOP_CHECK_CFG_H (PORT_BASE + 0xfc)
+#define STP_LINK_TIMER (PORT_BASE + 0x120)
#define SAS_SSP_CON_TIMER_CFG (PORT_BASE + 0x134)
#define SAS_SMP_CON_TIMER_CFG (PORT_BASE + 0x138)
#define SAS_STP_CON_TIMER_CFG (PORT_BASE + 0x13c)
@@ -167,6 +165,31 @@
#define PHYCTRL_PHY_ENA_MSK (PORT_BASE + 0x2bc)
#define SL_RX_BCAST_CHK_MSK (PORT_BASE + 0x2c0)
#define PHYCTRL_OOB_RESTART_MSK (PORT_BASE + 0x2c4)
+#define DMA_TX_STATUS (PORT_BASE + 0x2d0)
+#define DMA_TX_STATUS_BUSY_OFF 0
+#define DMA_TX_STATUS_BUSY_MSK (0x1 << DMA_TX_STATUS_BUSY_OFF)
+#define DMA_RX_STATUS (PORT_BASE + 0x2e8)
+#define DMA_RX_STATUS_BUSY_OFF 0
+#define DMA_RX_STATUS_BUSY_MSK (0x1 << DMA_RX_STATUS_BUSY_OFF)
+
+#define MAX_ITCT_HW 4096 /* max the hw can support */
+#define DEFAULT_ITCT_HW 2048 /* reset value, not reprogrammed */
+#if (HISI_SAS_MAX_DEVICES > DEFAULT_ITCT_HW)
+#error Max ITCT exceeded
+#endif
+
+#define AXI_MASTER_CFG_BASE (0x5000)
+#define AM_CTRL_GLOBAL (0x0)
+#define AM_CURR_TRANS_RETURN (0x150)
+
+#define AM_CFG_MAX_TRANS (0x5010)
+#define AM_CFG_SINGLE_PORT_MAX_TRANS (0x5014)
+#define AXI_CFG (0x5100)
+#define AM_ROB_ECC_ERR_ADDR (0x510c)
+#define AM_ROB_ECC_ONEBIT_ERR_ADDR_OFF 0
+#define AM_ROB_ECC_ONEBIT_ERR_ADDR_MSK (0xff << AM_ROB_ECC_ONEBIT_ERR_ADDR_OFF)
+#define AM_ROB_ECC_MULBIT_ERR_ADDR_OFF 8
+#define AM_ROB_ECC_MULBIT_ERR_ADDR_MSK (0xff << AM_ROB_ECC_MULBIT_ERR_ADDR_OFF)
/* HW dma structures */
/* Delivery queue header */
@@ -354,8 +377,6 @@
/* Global registers init */
hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE,
(u32)((1ULL << hisi_hba->queue_count) - 1));
- hisi_sas_write32(hisi_hba, AXI_USER1, 0x0);
- hisi_sas_write32(hisi_hba, AXI_USER2, 0x40000060);
hisi_sas_write32(hisi_hba, HGC_SAS_TXFAIL_RETRY_CTRL, 0x108);
hisi_sas_write32(hisi_hba, CFG_1US_TIMER_TRSH, 0xd);
hisi_sas_write32(hisi_hba, INT_COAL_EN, 0x1);
@@ -371,15 +392,14 @@
hisi_sas_write32(hisi_hba, CHNL_PHYUPDOWN_INT_MSK, 0x0);
hisi_sas_write32(hisi_hba, CHNL_ENT_INT_MSK, 0x0);
hisi_sas_write32(hisi_hba, HGC_COM_INT_MSK, 0x0);
- hisi_sas_write32(hisi_hba, SAS_ECC_INTR_MSK, 0xfff00c30);
+ hisi_sas_write32(hisi_hba, SAS_ECC_INTR_MSK, 0x0);
hisi_sas_write32(hisi_hba, AWQOS_AWCACHE_CFG, 0xf0f0);
hisi_sas_write32(hisi_hba, ARQOS_ARCACHE_CFG, 0xf0f0);
for (i = 0; i < hisi_hba->queue_count; i++)
hisi_sas_write32(hisi_hba, OQ0_INT_SRC_MSK+0x4*i, 0);
- hisi_sas_write32(hisi_hba, AXI_AHB_CLK_CFG, 1);
hisi_sas_write32(hisi_hba, HYPER_STREAM_ID_EN_CFG, 1);
- hisi_sas_write32(hisi_hba, CFG_MAX_TAG, 0xfff07fff);
+ hisi_sas_write32(hisi_hba, AXI_MASTER_CFG_BASE, 0x30000);
for (i = 0; i < hisi_hba->n_phy; i++) {
hisi_sas_phy_write32(hisi_hba, i, PROG_PHY_LINK_RATE, 0x801);
@@ -389,7 +409,6 @@
hisi_sas_phy_write32(hisi_hba, i, RXOP_CHECK_CFG_H, 0x1000);
hisi_sas_phy_write32(hisi_hba, i, CHL_INT1_MSK, 0xffffffff);
hisi_sas_phy_write32(hisi_hba, i, CHL_INT2_MSK, 0x8ffffbff);
- hisi_sas_phy_write32(hisi_hba, i, SL_CFG, 0x83f801fc);
hisi_sas_phy_write32(hisi_hba, i, PHY_CTRL_RDY_MSK, 0x0);
hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_NOT_RDY_MSK, 0x0);
hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_DWS_RESET_MSK, 0x0);
@@ -398,9 +417,11 @@
hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_OOB_RESTART_MSK, 0x0);
hisi_sas_phy_write32(hisi_hba, i, PHY_CTRL, 0x199b4fa);
hisi_sas_phy_write32(hisi_hba, i, SAS_SSP_CON_TIMER_CFG,
- 0xa0064);
+ 0xa03e8);
hisi_sas_phy_write32(hisi_hba, i, SAS_STP_CON_TIMER_CFG,
- 0xa0064);
+ 0xa03e8);
+ hisi_sas_phy_write32(hisi_hba, i, STP_LINK_TIMER,
+ 0x7f7a120);
}
for (i = 0; i < hisi_hba->queue_count; i++) {
/* Delivery queue */
@@ -578,8 +599,6 @@
memset(itct, 0, sizeof(struct hisi_sas_itct));
hisi_sas_write32(hisi_hba, ENT_INT_SRC3,
ENT_INT_SRC3_ITC_INT_MSK);
- hisi_hba->devices[dev_id].dev_type = SAS_PHY_UNUSED;
- hisi_hba->devices[dev_id].dev_status = HISI_SAS_DEV_NORMAL;
/* clear the itct */
hisi_sas_write32(hisi_hba, ITCT_CLR, 0);
@@ -610,8 +629,52 @@
1 << CFG_ABT_SET_IPTT_DONE_OFF);
}
+static int reset_hw_v3_hw(struct hisi_hba *hisi_hba)
+{
+ struct device *dev = hisi_hba->dev;
+ int ret;
+ u32 val;
+
+ hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE, 0);
+
+ /* Disable all of the PHYs */
+ hisi_sas_stop_phys(hisi_hba);
+ udelay(50);
+
+ /* Ensure axi bus idle */
+ ret = readl_poll_timeout(hisi_hba->regs + AXI_CFG, val, !val,
+ 20000, 1000000);
+ if (ret) {
+ dev_err(dev, "axi bus is not idle, ret = %d!\n", ret);
+ return -EIO;
+ }
+
+ if (ACPI_HANDLE(dev)) {
+ acpi_status s;
+
+ s = acpi_evaluate_object(ACPI_HANDLE(dev), "_RST", NULL, NULL);
+ if (ACPI_FAILURE(s)) {
+ dev_err(dev, "Reset failed\n");
+ return -EIO;
+ }
+ } else
+ dev_err(dev, "no reset method!\n");
+
+ return 0;
+}
+
static int hw_init_v3_hw(struct hisi_hba *hisi_hba)
{
+ struct device *dev = hisi_hba->dev;
+ int rc;
+
+ rc = reset_hw_v3_hw(hisi_hba);
+ if (rc) {
+ dev_err(dev, "hisi_sas_reset_hw failed, rc=%d", rc);
+ return rc;
+ }
+
+ msleep(100);
init_reg_v3_hw(hisi_hba);
return 0;
@@ -640,25 +703,12 @@
enable_phy_v3_hw(hisi_hba, phy_no);
}
-static void stop_phy_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
-{
- disable_phy_v3_hw(hisi_hba, phy_no);
-}
-
-static void start_phys_v3_hw(struct hisi_hba *hisi_hba)
-{
- int i;
-
- for (i = 0; i < hisi_hba->n_phy; i++)
- start_phy_v3_hw(hisi_hba, i);
-}
-
static void phy_hard_reset_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
{
struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
u32 txid_auto;
- stop_phy_v3_hw(hisi_hba, phy_no);
+ disable_phy_v3_hw(hisi_hba, phy_no);
if (phy->identify.device_type == SAS_END_DEVICE) {
txid_auto = hisi_sas_phy_read32(hisi_hba, phy_no, TXID_AUTO);
hisi_sas_phy_write32(hisi_hba, phy_no, TXID_AUTO,
@@ -675,7 +725,17 @@
static void phys_init_v3_hw(struct hisi_hba *hisi_hba)
{
- start_phys_v3_hw(hisi_hba);
+ int i;
+
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ struct hisi_sas_phy *phy = &hisi_hba->phy[i];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+
+ if (!sas_phy->phy->enabled)
+ continue;
+
+ start_phy_v3_hw(hisi_hba, i);
+ }
}
static void sl_notify_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
@@ -1140,7 +1200,6 @@
static int phy_down_v3_hw(int phy_no, struct hisi_hba *hisi_hba)
{
- int res = 0;
u32 phy_state, sl_ctrl, txid_auto;
struct device *dev = hisi_hba->dev;
@@ -1161,7 +1220,7 @@
hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0, CHL_INT0_NOT_RDY_MSK);
hisi_sas_phy_write32(hisi_hba, phy_no, PHYCTRL_NOT_RDY_MSK, 0);
- return res;
+ return 0;
}
static void phy_bcast_v3_hw(int phy_no, struct hisi_hba *hisi_hba)
@@ -1259,7 +1318,7 @@
if (irq_msk & (2 << (phy_no * 4)) && irq_value0) {
hisi_sas_phy_write32(hisi_hba, phy_no,
CHL_INT0, irq_value0
- & (~CHL_INT0_HOTPLUG_TOUT_MSK)
+ & (~CHL_INT0_SL_RX_BCST_ACK_MSK)
& (~CHL_INT0_SL_PHY_ENABLE_MSK)
& (~CHL_INT0_NOT_RDY_MSK));
}
@@ -1620,6 +1679,104 @@
return 0;
}
+static void phy_set_linkrate_v3_hw(struct hisi_hba *hisi_hba, int phy_no,
+ struct sas_phy_linkrates *r)
+{
+ u32 prog_phy_link_rate =
+ hisi_sas_phy_read32(hisi_hba, phy_no, PROG_PHY_LINK_RATE);
+ struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ int i;
+ enum sas_linkrate min, max;
+ u32 rate_mask = 0;
+
+ if (r->maximum_linkrate == SAS_LINK_RATE_UNKNOWN) {
+ max = sas_phy->phy->maximum_linkrate;
+ min = r->minimum_linkrate;
+ } else if (r->minimum_linkrate == SAS_LINK_RATE_UNKNOWN) {
+ max = r->maximum_linkrate;
+ min = sas_phy->phy->minimum_linkrate;
+ } else
+ return;
+
+ sas_phy->phy->maximum_linkrate = max;
+ sas_phy->phy->minimum_linkrate = min;
+
+ min -= SAS_LINK_RATE_1_5_GBPS;
+ max -= SAS_LINK_RATE_1_5_GBPS;
+
+ for (i = 0; i <= max; i++)
+ rate_mask |= 1 << (i * 2);
+
+ prog_phy_link_rate &= ~0xff;
+ prog_phy_link_rate |= rate_mask;
+
+ hisi_sas_phy_write32(hisi_hba, phy_no, PROG_PHY_LINK_RATE,
+ prog_phy_link_rate);
+
+ phy_hard_reset_v3_hw(hisi_hba, phy_no);
+}
+
+static void interrupt_disable_v3_hw(struct hisi_hba *hisi_hba)
+{
+ struct pci_dev *pdev = hisi_hba->pci_dev;
+ int i;
+
+ synchronize_irq(pci_irq_vector(pdev, 1));
+ synchronize_irq(pci_irq_vector(pdev, 2));
+ synchronize_irq(pci_irq_vector(pdev, 11));
+ for (i = 0; i < hisi_hba->queue_count; i++) {
+ hisi_sas_write32(hisi_hba, OQ0_INT_SRC_MSK + 0x4 * i, 0x1);
+ synchronize_irq(pci_irq_vector(pdev, i + 16));
+ }
+
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1, 0xffffffff);
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK2, 0xffffffff);
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, 0xffffffff);
+ hisi_sas_write32(hisi_hba, SAS_ECC_INTR_MSK, 0xffffffff);
+
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT1_MSK, 0xffffffff);
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT2_MSK, 0xffffffff);
+ hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_NOT_RDY_MSK, 0x1);
+ hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_PHY_ENA_MSK, 0x1);
+ hisi_sas_phy_write32(hisi_hba, i, SL_RX_BCAST_CHK_MSK, 0x1);
+ }
+}
+
+static u32 get_phys_state_v3_hw(struct hisi_hba *hisi_hba)
+{
+ return hisi_sas_read32(hisi_hba, PHY_STATE);
+}
+
+static int soft_reset_v3_hw(struct hisi_hba *hisi_hba)
+{
+ struct device *dev = hisi_hba->dev;
+ int rc;
+ u32 status;
+
+ interrupt_disable_v3_hw(hisi_hba);
+ hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE, 0x0);
+
+ hisi_sas_stop_phys(hisi_hba);
+
+ mdelay(10);
+
+ hisi_sas_write32(hisi_hba, AXI_MASTER_CFG_BASE + AM_CTRL_GLOBAL, 0x1);
+
+ /* wait until bus idle */
+ rc = readl_poll_timeout(hisi_hba->regs + AXI_MASTER_CFG_BASE +
+ AM_CURR_TRANS_RETURN, status, status == 0x3, 10, 100);
+ if (rc) {
+ dev_err(dev, "axi bus is not idle, rc = %d\n", rc);
+ return rc;
+ }
+
+ hisi_sas_init_mem(hisi_hba);
+
+ return hw_init_v3_hw(hisi_hba);
+}
+
static const struct hisi_sas_hw hisi_sas_v3_hw = {
.hw_init = hisi_sas_v3_init,
.setup_itct = setup_itct_v3_hw,
@@ -1640,7 +1797,10 @@
.phy_disable = disable_phy_v3_hw,
.phy_hard_reset = phy_hard_reset_v3_hw,
.phy_get_max_linkrate = phy_get_max_linkrate_v3_hw,
+ .phy_set_linkrate = phy_set_linkrate_v3_hw,
.dereg_device = dereg_device_v3_hw,
+ .soft_reset = soft_reset_v3_hw,
+ .get_phys_state = get_phys_state_v3_hw,
};
static struct Scsi_Host *
@@ -1651,8 +1811,10 @@
struct device *dev = &pdev->dev;
shost = scsi_host_alloc(hisi_sas_sht, sizeof(*hisi_hba));
- if (!shost)
- goto err_out;
+ if (!shost) {
+ dev_err(dev, "shost alloc failed\n");
+ return NULL;
+ }
hisi_hba = shost_priv(shost);
hisi_hba->hw = &hisi_sas_v3_hw;
@@ -1673,6 +1835,7 @@
return shost;
err_out:
+ scsi_host_put(shost);
dev_err(dev, "shost alloc failed\n");
return NULL;
}
@@ -1781,7 +1944,7 @@
err_out_register_ha:
scsi_remove_host(shost);
err_out_ha:
- kfree(shost);
+ scsi_host_put(shost);
err_out_regions:
pci_release_regions(pdev);
err_out_disable_device:
@@ -1801,6 +1964,7 @@
struct hisi_sas_cq *cq = &hisi_hba->cq[i];
free_irq(pci_irq_vector(pdev, i+16), cq);
+ tasklet_kill(&cq->tasklet);
}
pci_free_irq_vectors(pdev);
}
@@ -1810,14 +1974,16 @@
struct device *dev = &pdev->dev;
struct sas_ha_struct *sha = dev_get_drvdata(dev);
struct hisi_hba *hisi_hba = sha->lldd_ha;
+ struct Scsi_Host *shost = sha->core.shost;
sas_unregister_ha(sha);
sas_remove_host(sha->core.shost);
- hisi_sas_free(hisi_hba);
hisi_sas_v3_destroy_irqs(pdev, hisi_hba);
pci_release_regions(pdev);
pci_disable_device(pdev);
+ hisi_sas_free(hisi_hba);
+ scsi_host_put(shost);
}
enum {
@@ -1839,7 +2005,6 @@
module_pci_driver(sas_v3_pci_driver);
-MODULE_VERSION(DRV_VERSION);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("John Garry <john.garry@huawei.com>");
MODULE_DESCRIPTION("HISILICON SAS controller v3 hw driver based on pci device");
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 4f7cdb2..9abe810 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -81,11 +81,8 @@
MODULE_SUPPORTED_DEVICE("HP Smart Array Controllers");
MODULE_VERSION(HPSA_DRIVER_VERSION);
MODULE_LICENSE("GPL");
+MODULE_ALIAS("cciss");
-static int hpsa_allow_any;
-module_param(hpsa_allow_any, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(hpsa_allow_any,
- "Allow hpsa driver to access unknown HP Smart Array hardware");
static int hpsa_simple_mode;
module_param(hpsa_simple_mode, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(hpsa_simple_mode,
@@ -148,6 +145,8 @@
{PCI_VENDOR_ID_HP, 0x333f, 0x103c, 0x333f},
{PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
+ {PCI_VENDOR_ID_COMPAQ, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
{0,}
};
@@ -158,6 +157,26 @@
* access = Address of the struct of function pointers
*/
static struct board_type products[] = {
+ {0x40700E11, "Smart Array 5300", &SA5A_access},
+ {0x40800E11, "Smart Array 5i", &SA5B_access},
+ {0x40820E11, "Smart Array 532", &SA5B_access},
+ {0x40830E11, "Smart Array 5312", &SA5B_access},
+ {0x409A0E11, "Smart Array 641", &SA5A_access},
+ {0x409B0E11, "Smart Array 642", &SA5A_access},
+ {0x409C0E11, "Smart Array 6400", &SA5A_access},
+ {0x409D0E11, "Smart Array 6400 EM", &SA5A_access},
+ {0x40910E11, "Smart Array 6i", &SA5A_access},
+ {0x3225103C, "Smart Array P600", &SA5A_access},
+ {0x3223103C, "Smart Array P800", &SA5A_access},
+ {0x3234103C, "Smart Array P400", &SA5A_access},
+ {0x3235103C, "Smart Array P400i", &SA5A_access},
+ {0x3211103C, "Smart Array E200i", &SA5A_access},
+ {0x3212103C, "Smart Array E200", &SA5A_access},
+ {0x3213103C, "Smart Array E200i", &SA5A_access},
+ {0x3214103C, "Smart Array E200i", &SA5A_access},
+ {0x3215103C, "Smart Array E200i", &SA5A_access},
+ {0x3237103C, "Smart Array E500", &SA5A_access},
+ {0x323D103C, "Smart Array P700m", &SA5A_access},
{0x3241103C, "Smart Array P212", &SA5_access},
{0x3243103C, "Smart Array P410", &SA5_access},
{0x3245103C, "Smart Array P410i", &SA5_access},
@@ -278,7 +297,8 @@
u64 *cfg_offset);
static int hpsa_pci_find_memory_BAR(struct pci_dev *pdev,
unsigned long *memory_bar);
-static int hpsa_lookup_board_id(struct pci_dev *pdev, u32 *board_id);
+static int hpsa_lookup_board_id(struct pci_dev *pdev, u32 *board_id,
+ bool *legacy_board);
static int wait_for_device_to_become_ready(struct ctlr_info *h,
unsigned char lunaddr[],
int reply_queue);
@@ -866,6 +886,16 @@
return snprintf(buf, 20, "%d\n", h->ctlr);
}
+static ssize_t host_show_legacy_board(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ctlr_info *h;
+ struct Scsi_Host *shost = class_to_shost(dev);
+
+ h = shost_to_hba(shost);
+ return snprintf(buf, 20, "%d\n", h->legacy_board ? 1 : 0);
+}
+
static DEVICE_ATTR(raid_level, S_IRUGO, raid_level_show, NULL);
static DEVICE_ATTR(lunid, S_IRUGO, lunid_show, NULL);
static DEVICE_ATTR(unique_id, S_IRUGO, unique_id_show, NULL);
@@ -891,6 +921,8 @@
host_show_lockup_detected, NULL);
static DEVICE_ATTR(ctlr_num, S_IRUGO,
host_show_ctlr_num, NULL);
+static DEVICE_ATTR(legacy_board, S_IRUGO,
+ host_show_legacy_board, NULL);
static struct device_attribute *hpsa_sdev_attrs[] = {
&dev_attr_raid_level,
@@ -912,6 +944,7 @@
&dev_attr_raid_offload_debug,
&dev_attr_lockup_detected,
&dev_attr_ctlr_num,
+ &dev_attr_legacy_board,
NULL,
};
@@ -3565,7 +3598,7 @@
memset(scsi3addr, 0, sizeof(scsi3addr));
if (fill_cmd(c, logical ? HPSA_REPORT_LOG : HPSA_REPORT_PHYS, h,
buf, bufsize, 0, scsi3addr, TYPE_CMD)) {
- rc = -1;
+ rc = -EAGAIN;
goto out;
}
if (extended_response)
@@ -3578,16 +3611,19 @@
if (ei->CommandStatus != 0 &&
ei->CommandStatus != CMD_DATA_UNDERRUN) {
hpsa_scsi_interpret_error(h, c);
- rc = -1;
+ rc = -EIO;
} else {
struct ReportLUNdata *rld = buf;
if (rld->extended_response_flag != extended_response) {
- dev_err(&h->pdev->dev,
- "report luns requested format %u, got %u\n",
- extended_response,
- rld->extended_response_flag);
- rc = -1;
+ if (!h->legacy_board) {
+ dev_err(&h->pdev->dev,
+ "report luns requested format %u, got %u\n",
+ extended_response,
+ rld->extended_response_flag);
+ rc = -EINVAL;
+ } else
+ rc = -EOPNOTSUPP;
}
}
out:
@@ -3603,7 +3639,7 @@
rc = hpsa_scsi_do_report_luns(h, 0, buf, bufsize,
HPSA_REPORT_PHYS_EXTENDED);
- if (!rc || !hpsa_allow_any)
+ if (!rc || rc != -EOPNOTSUPP)
return rc;
/* REPORT PHYS EXTENDED is not supported */
@@ -3791,7 +3827,7 @@
memset(this_device->device_id, 0,
sizeof(this_device->device_id));
if (hpsa_get_device_id(h, scsi3addr, this_device->device_id, 8,
- sizeof(this_device->device_id)))
+ sizeof(this_device->device_id)) < 0)
dev_err(&h->pdev->dev,
"hpsa%d: %s: can't get device id for host %d:C0:T%d:L%d\t%s\t%.16s\n",
h->ctlr, __func__,
@@ -3809,6 +3845,16 @@
if (h->fw_support & MISC_FW_RAID_OFFLOAD_BASIC)
hpsa_get_ioaccel_status(h, scsi3addr, this_device);
volume_offline = hpsa_volume_offline(h, scsi3addr);
+ if (volume_offline == HPSA_VPD_LV_STATUS_UNSUPPORTED &&
+ h->legacy_board) {
+ /*
+ * Legacy boards might not support volume status
+ */
+ dev_info(&h->pdev->dev,
+ "C0:T%d:L%d Volume status not available, assuming online.\n",
+ this_device->target, this_device->lun);
+ volume_offline = 0;
+ }
this_device->volume_offline = volume_offline;
if (volume_offline == HPSA_LV_FAILED) {
rc = HPSA_LV_FAILED;
@@ -6571,7 +6617,6 @@
default:
dev_warn(&h->pdev->dev, "unknown command 0x%c\n", cmd);
BUG();
- return -1;
}
} else if (cmd_type == TYPE_MSG) {
switch (cmd) {
@@ -7232,7 +7277,8 @@
return 0;
}
-static int hpsa_lookup_board_id(struct pci_dev *pdev, u32 *board_id)
+static int hpsa_lookup_board_id(struct pci_dev *pdev, u32 *board_id,
+ bool *legacy_board)
{
int i;
u32 subsystem_vendor_id, subsystem_device_id;
@@ -7242,17 +7288,24 @@
*board_id = ((subsystem_device_id << 16) & 0xffff0000) |
subsystem_vendor_id;
+ if (legacy_board)
+ *legacy_board = false;
for (i = 0; i < ARRAY_SIZE(products); i++)
- if (*board_id == products[i].board_id)
+ if (*board_id == products[i].board_id) {
+ if (products[i].access != &SA5A_access &&
+ products[i].access != &SA5B_access)
+ return i;
+ dev_warn(&pdev->dev,
+ "legacy board ID: 0x%08x\n",
+ *board_id);
+ if (legacy_board)
+ *legacy_board = true;
return i;
+ }
- if ((subsystem_vendor_id != PCI_VENDOR_ID_HP &&
- subsystem_vendor_id != PCI_VENDOR_ID_COMPAQ) ||
- !hpsa_allow_any) {
- dev_warn(&pdev->dev, "unrecognized board ID: "
- "0x%08x, ignoring.\n", *board_id);
- return -ENODEV;
- }
+ dev_warn(&pdev->dev, "unrecognized board ID: 0x%08x\n", *board_id);
+ if (legacy_board)
+ *legacy_board = true;
return ARRAY_SIZE(products) - 1; /* generic unknown smart array */
}
@@ -7555,13 +7608,14 @@
static int hpsa_pci_init(struct ctlr_info *h)
{
int prod_index, err;
+ bool legacy_board;
- prod_index = hpsa_lookup_board_id(h->pdev, &h->board_id);
+ prod_index = hpsa_lookup_board_id(h->pdev, &h->board_id, &legacy_board);
if (prod_index < 0)
return prod_index;
h->product_name = products[prod_index].product_name;
h->access = *(products[prod_index].access);
-
+ h->legacy_board = legacy_board;
pci_disable_link_state(h->pdev, PCIE_LINK_STATE_L0S |
PCIE_LINK_STATE_L1 | PCIE_LINK_STATE_CLKPM);
@@ -8241,7 +8295,7 @@
if (number_of_controllers == 0)
printk(KERN_INFO DRIVER_NAME "\n");
- rc = hpsa_lookup_board_id(pdev, &board_id);
+ rc = hpsa_lookup_board_id(pdev, &board_id, NULL);
if (rc < 0) {
dev_warn(&pdev->dev, "Board ID not found\n");
return rc;
@@ -9443,14 +9497,6 @@
return -EINVAL;
}
-/* SMP = Serial Management Protocol */
-static int
-hpsa_sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
-struct request *req)
-{
- return -EINVAL;
-}
-
static struct sas_function_template hpsa_sas_transport_functions = {
.get_linkerrors = hpsa_sas_get_linkerrors,
.get_enclosure_identifier = hpsa_sas_get_enclosure_identifier,
@@ -9460,7 +9506,6 @@
.phy_setup = hpsa_sas_phy_setup,
.phy_release = hpsa_sas_phy_release,
.set_phy_speed = hpsa_sas_phy_speed,
- .smp_handler = hpsa_sas_smp_handler,
};
/*
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index 1c49741..018f980 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -293,6 +293,7 @@
int drv_req_rescan;
int raid_offload_debug;
int discovery_polling;
+ int legacy_board;
struct ReportLUNdata *lastlogicals;
int needs_abort_tags_swizzled;
struct workqueue_struct *resubmit_wq;
@@ -447,6 +448,23 @@
}
}
+/*
+ * Variant of the above; 0x04 turns interrupts off...
+ */
+static void SA5B_intr_mask(struct ctlr_info *h, unsigned long val)
+{
+ if (val) { /* Turn interrupts on */
+ h->interrupts_enabled = 1;
+ writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ } else { /* Turn them off */
+ h->interrupts_enabled = 0;
+ writel(SA5B_INTR_OFF,
+ h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ }
+}
+
static void SA5_performant_intr_mask(struct ctlr_info *h, unsigned long val)
{
if (val) { /* turn on interrupts */
@@ -549,6 +567,14 @@
true : false;
}
+/*
+ * Returns true if an interrupt is pending..
+ */
+static bool SA5B_intr_pending(struct ctlr_info *h)
+{
+ return readl(h->vaddr + SA5_INTR_STATUS) & SA5B_INTR_PENDING;
+}
+
#define IOACCEL_MODE1_REPLY_QUEUE_INDEX 0x1A0
#define IOACCEL_MODE1_PRODUCER_INDEX 0x1B8
#define IOACCEL_MODE1_CONSUMER_INDEX 0x1BC
@@ -581,38 +607,53 @@
}
static struct access_method SA5_access = {
- .submit_command = SA5_submit_command,
- .set_intr_mask = SA5_intr_mask,
- .intr_pending = SA5_intr_pending,
- .command_completed = SA5_completed,
+ .submit_command = SA5_submit_command,
+ .set_intr_mask = SA5_intr_mask,
+ .intr_pending = SA5_intr_pending,
+ .command_completed = SA5_completed,
+};
+
+/* Duplicate entry of the above to mark unsupported boards */
+static struct access_method SA5A_access = {
+ .submit_command = SA5_submit_command,
+ .set_intr_mask = SA5_intr_mask,
+ .intr_pending = SA5_intr_pending,
+ .command_completed = SA5_completed,
+};
+
+static struct access_method SA5B_access = {
+ .submit_command = SA5_submit_command,
+ .set_intr_mask = SA5B_intr_mask,
+ .intr_pending = SA5B_intr_pending,
+ .command_completed = SA5_completed,
};
static struct access_method SA5_ioaccel_mode1_access = {
- .submit_command = SA5_submit_command,
- .set_intr_mask = SA5_performant_intr_mask,
- .intr_pending = SA5_ioaccel_mode1_intr_pending,
- .command_completed = SA5_ioaccel_mode1_completed,
+ .submit_command = SA5_submit_command,
+ .set_intr_mask = SA5_performant_intr_mask,
+ .intr_pending = SA5_ioaccel_mode1_intr_pending,
+ .command_completed = SA5_ioaccel_mode1_completed,
};
static struct access_method SA5_ioaccel_mode2_access = {
- .submit_command = SA5_submit_command_ioaccel2,
- .set_intr_mask = SA5_performant_intr_mask,
- .intr_pending = SA5_performant_intr_pending,
- .command_completed = SA5_performant_completed,
+ .submit_command = SA5_submit_command_ioaccel2,
+ .set_intr_mask = SA5_performant_intr_mask,
+ .intr_pending = SA5_performant_intr_pending,
+ .command_completed = SA5_performant_completed,
};
static struct access_method SA5_performant_access = {
- .submit_command = SA5_submit_command,
- .set_intr_mask = SA5_performant_intr_mask,
- .intr_pending = SA5_performant_intr_pending,
- .command_completed = SA5_performant_completed,
+ .submit_command = SA5_submit_command,
+ .set_intr_mask = SA5_performant_intr_mask,
+ .intr_pending = SA5_performant_intr_pending,
+ .command_completed = SA5_performant_completed,
};
static struct access_method SA5_performant_access_no_read = {
- .submit_command = SA5_submit_command_no_read,
- .set_intr_mask = SA5_performant_intr_mask,
- .intr_pending = SA5_performant_intr_pending,
- .command_completed = SA5_performant_completed,
+ .submit_command = SA5_submit_command_no_read,
+ .set_intr_mask = SA5_performant_intr_mask,
+ .intr_pending = SA5_performant_intr_pending,
+ .command_completed = SA5_performant_completed,
};
struct board_type {
diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c
index 7226226..2fad7f0 100644
--- a/drivers/scsi/hptiop.c
+++ b/drivers/scsi/hptiop.c
@@ -1106,12 +1106,10 @@
static int hptiop_reset(struct scsi_cmnd *scp)
{
- struct Scsi_Host * host = scp->device->host;
- struct hptiop_hba * hba = (struct hptiop_hba *)host->hostdata;
+ struct hptiop_hba * hba = (struct hptiop_hba *)scp->device->host->hostdata;
- printk(KERN_WARNING "hptiop_reset(%d/%d/%d) scp=%p\n",
- scp->device->host->host_no, scp->device->channel,
- scp->device->id, scp);
+ printk(KERN_WARNING "hptiop_reset(%d/%d/%d)\n",
+ scp->device->host->host_no, -1, -1);
return hptiop_reset_hba(hba)? FAILED : SUCCESS;
}
@@ -1179,8 +1177,7 @@
.module = THIS_MODULE,
.name = driver_name,
.queuecommand = hptiop_queuecommand,
- .eh_device_reset_handler = hptiop_reset,
- .eh_bus_reset_handler = hptiop_reset,
+ .eh_host_reset_handler = hptiop_reset,
.info = hptiop_info,
.emulated = 0,
.use_clustering = ENABLE_CLUSTERING,
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index cc4e05b..b491af3 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -2528,16 +2528,12 @@
**/
static int ibmvfc_eh_host_reset_handler(struct scsi_cmnd *cmd)
{
- int rc, block_rc;
+ int rc;
struct ibmvfc_host *vhost = shost_priv(cmd->device->host);
- block_rc = fc_block_scsi_eh(cmd);
dev_err(vhost->dev, "Resetting connection due to error recovery\n");
rc = ibmvfc_issue_fc_host_lip(vhost->host);
- if (block_rc == FAST_IO_FAIL)
- return FAST_IO_FAIL;
-
return rc ? FAILED : SUCCESS;
}
@@ -4929,7 +4925,7 @@
return pool_dma + ((512 * 1024) * driver_template.cmd_per_lun);
}
-static struct vio_device_id ibmvfc_device_table[] = {
+static const struct vio_device_id ibmvfc_device_table[] = {
{"fcp", "IBM,vfc-client"},
{ "", "" }
};
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index da22b36..7d156b161 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -2330,7 +2330,7 @@
* ibmvscsi_device_table: Used by vio.c to match devices in the device tree we
* support.
*/
-static struct vio_device_id ibmvscsi_device_table[] = {
+static const struct vio_device_id ibmvscsi_device_table[] = {
{"vscsi", "IBM,v-scsi"},
{ "", "" }
};
diff --git a/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c b/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c
index 659ab48..785fb42 100644
--- a/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c
+++ b/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c
@@ -155,6 +155,9 @@
qrc = h_free_crq(vscsi->dds.unit_id);
switch (qrc) {
case H_SUCCESS:
+ spin_lock_bh(&vscsi->intr_lock);
+ vscsi->flags &= ~PREP_FOR_SUSPEND_FLAGS;
+ spin_unlock_bh(&vscsi->intr_lock);
break;
case H_HARDWARE:
@@ -422,6 +425,9 @@
new_state = vscsi->new_state;
vscsi->new_state = 0;
+ vscsi->flags |= DISCONNECT_SCHEDULED;
+ vscsi->flags &= ~SCHEDULE_DISCONNECT;
+
pr_debug("disconnect: flags 0x%x, state 0x%hx\n", vscsi->flags,
vscsi->state);
@@ -802,6 +808,13 @@
long rc = ADAPT_SUCCESS;
uint format;
+ rc = h_vioctl(vscsi->dds.unit_id, H_ENABLE_PREPARE_FOR_SUSPEND, 30000,
+ 0, 0, 0, 0);
+ if (rc == H_SUCCESS)
+ vscsi->flags |= PREP_FOR_SUSPEND_ENABLED;
+ else if (rc != H_NOT_FOUND)
+ pr_err("Error from Enable Prepare for Suspend: %ld\n", rc);
+
vscsi->flags &= PRESERVE_FLAG_FIELDS;
vscsi->rsp_q_timer.timer_pops = 0;
vscsi->debit = 0;
@@ -951,6 +964,63 @@
}
/**
+ * ibmvscsis_ready_for_suspend() - Helper function to call VIOCTL
+ * @vscsi: Pointer to our adapter structure
+ * @idle: Indicates whether we were called from adapter_idle. This
+ * is important to know if we need to do a disconnect, since if
+ * we're called from adapter_idle, we're still processing the
+ * current disconnect, so we can't just call post_disconnect.
+ *
+ * This function is called when the adapter is idle when phyp has sent
+ * us a Prepare for Suspend Transport Event.
+ *
+ * EXECUTION ENVIRONMENT:
+ * Process or interrupt environment called with interrupt lock held
+ */
+static long ibmvscsis_ready_for_suspend(struct scsi_info *vscsi, bool idle)
+{
+ long rc = 0;
+ struct viosrp_crq *crq;
+
+ /* See if there is a Resume event in the queue */
+ crq = vscsi->cmd_q.base_addr + vscsi->cmd_q.index;
+
+ pr_debug("ready_suspend: flags 0x%x, state 0x%hx crq_valid:%x\n",
+ vscsi->flags, vscsi->state, (int)crq->valid);
+
+ if (!(vscsi->flags & PREP_FOR_SUSPEND_ABORTED) && !(crq->valid)) {
+ rc = h_vioctl(vscsi->dds.unit_id, H_READY_FOR_SUSPEND, 0, 0, 0,
+ 0, 0);
+ if (rc) {
+ pr_err("Ready for Suspend Vioctl failed: %ld\n", rc);
+ rc = 0;
+ }
+ } else if (((vscsi->flags & PREP_FOR_SUSPEND_OVERWRITE) &&
+ (vscsi->flags & PREP_FOR_SUSPEND_ABORTED)) ||
+ ((crq->valid) && ((crq->valid != VALID_TRANS_EVENT) ||
+ (crq->format != RESUME_FROM_SUSP)))) {
+ if (idle) {
+ vscsi->state = ERR_DISCONNECT_RECONNECT;
+ ibmvscsis_reset_queue(vscsi);
+ rc = -1;
+ } else if (vscsi->state == CONNECTED) {
+ ibmvscsis_post_disconnect(vscsi,
+ ERR_DISCONNECT_RECONNECT, 0);
+ }
+
+ vscsi->flags &= ~PREP_FOR_SUSPEND_OVERWRITE;
+
+ if ((crq->valid) && ((crq->valid != VALID_TRANS_EVENT) ||
+ (crq->format != RESUME_FROM_SUSP)))
+ pr_err("Invalid element in CRQ after Prepare for Suspend");
+ }
+
+ vscsi->flags &= ~(PREP_FOR_SUSPEND_PENDING | PREP_FOR_SUSPEND_ABORTED);
+
+ return rc;
+}
+
+/**
* ibmvscsis_trans_event() - Handle a Transport Event
* @vscsi: Pointer to our adapter structure
* @crq: Pointer to CRQ entry containing the Transport Event
@@ -974,18 +1044,8 @@
case PARTNER_FAILED:
case PARTNER_DEREGISTER:
ibmvscsis_delete_client_info(vscsi, true);
- break;
-
- default:
- rc = ERROR;
- dev_err(&vscsi->dev, "trans_event: invalid format %d\n",
- (uint)crq->format);
- ibmvscsis_post_disconnect(vscsi, ERR_DISCONNECT,
- RESPONSE_Q_DOWN);
- break;
- }
-
- if (rc == ADAPT_SUCCESS) {
+ if (crq->format == MIGRATED)
+ vscsi->flags &= ~PREP_FOR_SUSPEND_OVERWRITE;
switch (vscsi->state) {
case NO_QUEUE:
case ERR_DISCONNECTED:
@@ -1034,6 +1094,60 @@
vscsi->flags |= (RESPONSE_Q_DOWN | TRANS_EVENT);
break;
}
+ break;
+
+ case PREPARE_FOR_SUSPEND:
+ pr_debug("Prep for Suspend, crq status = 0x%x\n",
+ (int)crq->status);
+ switch (vscsi->state) {
+ case ERR_DISCONNECTED:
+ case WAIT_CONNECTION:
+ case CONNECTED:
+ ibmvscsis_ready_for_suspend(vscsi, false);
+ break;
+ case SRP_PROCESSING:
+ vscsi->resume_state = vscsi->state;
+ vscsi->flags |= PREP_FOR_SUSPEND_PENDING;
+ if (crq->status == CRQ_ENTRY_OVERWRITTEN)
+ vscsi->flags |= PREP_FOR_SUSPEND_OVERWRITE;
+ ibmvscsis_post_disconnect(vscsi, WAIT_IDLE, 0);
+ break;
+ case NO_QUEUE:
+ case UNDEFINED:
+ case UNCONFIGURING:
+ case WAIT_ENABLED:
+ case ERR_DISCONNECT:
+ case ERR_DISCONNECT_RECONNECT:
+ case WAIT_IDLE:
+ pr_err("Invalid state for Prepare for Suspend Trans Event: 0x%x\n",
+ vscsi->state);
+ break;
+ }
+ break;
+
+ case RESUME_FROM_SUSP:
+ pr_debug("Resume from Suspend, crq status = 0x%x\n",
+ (int)crq->status);
+ if (vscsi->flags & PREP_FOR_SUSPEND_PENDING) {
+ vscsi->flags |= PREP_FOR_SUSPEND_ABORTED;
+ } else {
+ if ((crq->status == CRQ_ENTRY_OVERWRITTEN) ||
+ (vscsi->flags & PREP_FOR_SUSPEND_OVERWRITE)) {
+ ibmvscsis_post_disconnect(vscsi,
+ ERR_DISCONNECT_RECONNECT,
+ 0);
+ vscsi->flags &= ~PREP_FOR_SUSPEND_OVERWRITE;
+ }
+ }
+ break;
+
+ default:
+ rc = ERROR;
+ dev_err(&vscsi->dev, "trans_event: invalid format %d\n",
+ (uint)crq->format);
+ ibmvscsis_post_disconnect(vscsi, ERR_DISCONNECT,
+ RESPONSE_Q_DOWN);
+ break;
}
rc = vscsi->flags & SCHEDULE_DISCONNECT;
@@ -1201,6 +1315,7 @@
static void ibmvscsis_adapter_idle(struct scsi_info *vscsi)
{
int free_qs = false;
+ long rc = 0;
pr_debug("adapter_idle: flags 0x%x, state 0x%hx\n", vscsi->flags,
vscsi->state);
@@ -1240,7 +1355,14 @@
vscsi->rsp_q_timer.timer_pops = 0;
vscsi->debit = 0;
vscsi->credit = 0;
- if (vscsi->flags & TRANS_EVENT) {
+ if (vscsi->flags & PREP_FOR_SUSPEND_PENDING) {
+ vscsi->state = vscsi->resume_state;
+ vscsi->resume_state = 0;
+ rc = ibmvscsis_ready_for_suspend(vscsi, true);
+ vscsi->flags &= ~DISCONNECT_SCHEDULED;
+ if (rc)
+ break;
+ } else if (vscsi->flags & TRANS_EVENT) {
vscsi->state = WAIT_CONNECTION;
vscsi->flags &= PRESERVE_FLAG_FIELDS;
} else {
@@ -3792,8 +3914,16 @@
{
struct ibmvscsis_tport *tport =
container_of(wwn, struct ibmvscsis_tport, tport_wwn);
+ u16 tpgt;
int rc;
+ if (strstr(name, "tpgt_") != name)
+ return ERR_PTR(-EINVAL);
+ rc = kstrtou16(name + 5, 0, &tpgt);
+ if (rc)
+ return ERR_PTR(rc);
+ tport->tport_tpgt = tpgt;
+
tport->releasing = false;
rc = core_tpg_register(&tport->tport_wwn, &tport->se_tpg,
@@ -3956,7 +4086,7 @@
.dev_groups = ibmvscsis_dev_groups,
};
-static struct vio_device_id ibmvscsis_device_table[] = {
+static const struct vio_device_id ibmvscsis_device_table[] = {
{ "v-scsi-host", "IBM,v-scsi-host" },
{ "", "" }
};
diff --git a/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.h b/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.h
index b4391a8..cc96c27 100644
--- a/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.h
+++ b/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.h
@@ -262,6 +262,14 @@
#define DISCONNECT_SCHEDULED 0x00800
/* remove function is sleeping */
#define CFG_SLEEPING 0x01000
+ /* Register for Prepare for Suspend Transport Events */
+#define PREP_FOR_SUSPEND_ENABLED 0x02000
+ /* Prepare for Suspend event sent */
+#define PREP_FOR_SUSPEND_PENDING 0x04000
+ /* Resume from Suspend event sent */
+#define PREP_FOR_SUSPEND_ABORTED 0x08000
+ /* Prepare for Suspend event overwrote another CRQ entry */
+#define PREP_FOR_SUSPEND_OVERWRITE 0x10000
u32 flags;
/* adapter lock */
spinlock_t intr_lock;
@@ -272,6 +280,7 @@
/* used in crq, to tag what iu the response is for */
u64 empty_iu_tag;
uint new_state;
+ uint resume_state;
/* control block for the response queue timer */
struct timer_cb rsp_q_timer;
/* keep last client to enable proper accounting */
@@ -324,8 +333,13 @@
#define TARGET_STOP(VSCSI) (long)(((VSCSI)->state & DONT_PROCESS_STATE) | \
((VSCSI)->flags & BLOCK))
+#define PREP_FOR_SUSPEND_FLAGS (PREP_FOR_SUSPEND_ENABLED | \
+ PREP_FOR_SUSPEND_PENDING | \
+ PREP_FOR_SUSPEND_ABORTED | \
+ PREP_FOR_SUSPEND_OVERWRITE)
+
/* flag bit that are not reset during disconnect */
-#define PRESERVE_FLAG_FIELDS 0
+#define PRESERVE_FLAG_FIELDS (PREP_FOR_SUSPEND_FLAGS)
#define vio_iu(IUE) ((union viosrp_iu *)((IUE)->sbuf->buf))
@@ -333,8 +347,15 @@
#define WRITE_CMD(cdb) (((cdb)[0] & 0x1F) == 0xA)
#ifndef H_GET_PARTNER_INFO
-#define H_GET_PARTNER_INFO 0x0000000000000008LL
+#define H_GET_PARTNER_INFO 0x0000000000000008LL
#endif
+#ifndef H_ENABLE_PREPARE_FOR_SUSPEND
+#define H_ENABLE_PREPARE_FOR_SUSPEND 0x000000000000001DLL
+#endif
+#ifndef H_READY_FOR_SUSPEND
+#define H_READY_FOR_SUSPEND 0x000000000000001ELL
+#endif
+
#define h_copy_rdma(l, sa, sb, da, db) \
plpar_hcall_norets(H_COPY_RDMA, l, sa, sb, da, db)
diff --git a/drivers/scsi/ibmvscsi_tgt/libsrp.h b/drivers/scsi/ibmvscsi_tgt/libsrp.h
index 4696f33..9fec55b 100644
--- a/drivers/scsi/ibmvscsi_tgt/libsrp.h
+++ b/drivers/scsi/ibmvscsi_tgt/libsrp.h
@@ -30,10 +30,13 @@
UNUSED_FORMAT = 0,
PARTNER_FAILED = 1,
PARTNER_DEREGISTER = 2,
- MIGRATED = 6
+ MIGRATED = 6,
+ PREPARE_FOR_SUSPEND = 9,
+ RESUME_FROM_SUSP = 0xA
};
enum srp_status {
+ CRQ_ENTRY_OVERWRITTEN = 0x20,
HEADER_DESCRIPTOR = 0xF1,
PING = 0xF5,
PING_RESPONSE = 0xF6
diff --git a/drivers/scsi/imm.c b/drivers/scsi/imm.c
index 9164ce12..87c9419 100644
--- a/drivers/scsi/imm.c
+++ b/drivers/scsi/imm.c
@@ -1106,7 +1106,6 @@
.name = "Iomega VPI2 (imm) interface",
.queuecommand = imm_queuecommand,
.eh_abort_handler = imm_abort,
- .eh_bus_reset_handler = imm_reset,
.eh_host_reset_handler = imm_reset,
.bios_param = imm_biosparam,
.this_id = 7,
diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c
index 4537117..922e3e5 100644
--- a/drivers/scsi/isci/init.c
+++ b/drivers/scsi/isci/init.c
@@ -166,7 +166,7 @@
.use_clustering = ENABLE_CLUSTERING,
.eh_abort_handler = sas_eh_abort_handler,
.eh_device_reset_handler = sas_eh_device_reset_handler,
- .eh_bus_reset_handler = sas_eh_bus_reset_handler,
+ .eh_target_reset_handler = sas_eh_target_reset_handler,
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
.shost_attrs = isci_host_attrs,
diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index 4842fc0..4d934d6 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -163,7 +163,6 @@
struct iscsi_tcp_conn *tcp_conn;
struct iscsi_sw_tcp_conn *tcp_sw_conn;
struct iscsi_conn *conn;
- struct iscsi_session *session;
void (*old_state_change)(struct sock *);
read_lock_bh(&sk->sk_callback_lock);
@@ -172,7 +171,6 @@
read_unlock_bh(&sk->sk_callback_lock);
return;
}
- session = conn->session;
iscsi_sw_sk_state_check(sk);
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index 234352da..772c35a 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -2222,8 +2222,6 @@
FC_SCSI_DBG(lport, "Resetting host\n");
- fc_block_scsi_eh(sc_cmd);
-
fc_lport_reset(lport);
wait_tmo = jiffies + FC_HOST_RESET_TIMEOUT;
while (!fc_fcp_lport_queue_ready(lport) && time_before(jiffies,
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 42381ad..bd4605a 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -1078,7 +1078,7 @@
if (opcode != ISCSI_OP_NOOP_OUT)
return 0;
- if (rejected_pdu.itt == cpu_to_be32(ISCSI_RESERVED_TAG)) {
+ if (rejected_pdu.itt == cpu_to_be32(ISCSI_RESERVED_TAG)) {
/*
* nop-out in response to target's nop-out rejected.
* Just resend.
diff --git a/drivers/scsi/libsas/Kconfig b/drivers/scsi/libsas/Kconfig
index 9dafe64..13739bfa 100644
--- a/drivers/scsi/libsas/Kconfig
+++ b/drivers/scsi/libsas/Kconfig
@@ -26,6 +26,7 @@
tristate "SAS Domain Transport Attributes"
depends on SCSI
select SCSI_SAS_ATTRS
+ select BLK_DEV_BSGLIB
help
This provides transport specific helpers for SAS drivers which
use the domain device construct (like the aic94xxx).
diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
index 87f5e694..70be442 100644
--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -343,6 +343,7 @@
case SAS_END_DEVICE:
if (ex_phy->attached_sata_dev)
return sas_ata_clear_pending(dev, ex_phy);
+ /* fall through */
default:
return -ENODEV;
}
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index 570b2cb..6b4fd23 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -64,8 +64,8 @@
/* Give it some long enough timeout. In seconds. */
#define SMP_TIMEOUT 10
-static int smp_execute_task(struct domain_device *dev, void *req, int req_size,
- void *resp, int resp_size)
+static int smp_execute_task_sg(struct domain_device *dev,
+ struct scatterlist *req, struct scatterlist *resp)
{
int res, retry;
struct sas_task *task = NULL;
@@ -86,8 +86,8 @@
}
task->dev = dev;
task->task_proto = dev->tproto;
- sg_init_one(&task->smp_task.smp_req, req, req_size);
- sg_init_one(&task->smp_task.smp_resp, resp, resp_size);
+ task->smp_task.smp_req = *req;
+ task->smp_task.smp_resp = *resp;
task->task_done = smp_task_done;
@@ -151,6 +151,17 @@
return res;
}
+static int smp_execute_task(struct domain_device *dev, void *req, int req_size,
+ void *resp, int resp_size)
+{
+ struct scatterlist req_sg;
+ struct scatterlist resp_sg;
+
+ sg_init_one(&req_sg, req, req_size);
+ sg_init_one(&resp_sg, resp, resp_size);
+ return smp_execute_task_sg(dev, &req_sg, &resp_sg);
+}
+
/* ---------- Allocations ---------- */
static inline void *alloc_smp_req(int size)
@@ -2130,57 +2141,50 @@
return res;
}
-int sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
- struct request *req)
+void sas_smp_handler(struct bsg_job *job, struct Scsi_Host *shost,
+ struct sas_rphy *rphy)
{
struct domain_device *dev;
- int ret, type;
- struct request *rsp = req->next_rq;
-
- if (!rsp) {
- printk("%s: space for a smp response is missing\n",
- __func__);
- return -EINVAL;
- }
+ unsigned int reslen = 0;
+ int ret = -EINVAL;
/* no rphy means no smp target support (ie aic94xx host) */
if (!rphy)
- return sas_smp_host_handler(shost, req, rsp);
+ return sas_smp_host_handler(job, shost);
- type = rphy->identify.device_type;
-
- if (type != SAS_EDGE_EXPANDER_DEVICE &&
- type != SAS_FANOUT_EXPANDER_DEVICE) {
+ switch (rphy->identify.device_type) {
+ case SAS_EDGE_EXPANDER_DEVICE:
+ case SAS_FANOUT_EXPANDER_DEVICE:
+ break;
+ default:
printk("%s: can we send a smp request to a device?\n",
__func__);
- return -EINVAL;
+ goto out;
}
dev = sas_find_dev_by_rphy(rphy);
if (!dev) {
printk("%s: fail to find a domain_device?\n", __func__);
- return -EINVAL;
+ goto out;
}
/* do we need to support multiple segments? */
- if (bio_multiple_segments(req->bio) ||
- bio_multiple_segments(rsp->bio)) {
+ if (job->request_payload.sg_cnt > 1 ||
+ job->reply_payload.sg_cnt > 1) {
printk("%s: multiple segments req %u, rsp %u\n",
- __func__, blk_rq_bytes(req), blk_rq_bytes(rsp));
- return -EINVAL;
+ __func__, job->request_payload.payload_len,
+ job->reply_payload.payload_len);
+ goto out;
}
- ret = smp_execute_task(dev, bio_data(req->bio), blk_rq_bytes(req),
- bio_data(rsp->bio), blk_rq_bytes(rsp));
+ ret = smp_execute_task_sg(dev, job->request_payload.sg_list,
+ job->reply_payload.sg_list);
if (ret > 0) {
/* positive number is the untransferred residual */
- scsi_req(rsp)->resid_len = ret;
- scsi_req(req)->resid_len = 0;
+ reslen = ret;
ret = 0;
- } else if (ret == 0) {
- scsi_req(rsp)->resid_len = 0;
- scsi_req(req)->resid_len = 0;
}
- return ret;
+out:
+ bsg_job_done(job, ret, reslen);
}
diff --git a/drivers/scsi/libsas/sas_host_smp.c b/drivers/scsi/libsas/sas_host_smp.c
index 45cbbc4..9ead93d 100644
--- a/drivers/scsi/libsas/sas_host_smp.c
+++ b/drivers/scsi/libsas/sas_host_smp.c
@@ -225,47 +225,36 @@
resp_data[2] = SMP_RESP_FUNC_ACC;
}
-int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
- struct request *rsp)
+void sas_smp_host_handler(struct bsg_job *job, struct Scsi_Host *shost)
{
- u8 *req_data = NULL, *resp_data = NULL, *buf;
struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
+ u8 *req_data, *resp_data;
+ unsigned int reslen = 0;
int error = -EINVAL;
/* eight is the minimum size for request and response frames */
- if (blk_rq_bytes(req) < 8 || blk_rq_bytes(rsp) < 8)
+ if (job->request_payload.payload_len < 8 ||
+ job->reply_payload.payload_len < 8)
goto out;
- if (bio_offset(req->bio) + blk_rq_bytes(req) > PAGE_SIZE ||
- bio_offset(rsp->bio) + blk_rq_bytes(rsp) > PAGE_SIZE) {
- shost_printk(KERN_ERR, shost,
- "SMP request/response frame crosses page boundary");
+ error = -ENOMEM;
+ req_data = kzalloc(job->request_payload.payload_len, GFP_KERNEL);
+ if (!req_data)
goto out;
- }
-
- req_data = kzalloc(blk_rq_bytes(req), GFP_KERNEL);
+ sg_copy_to_buffer(job->request_payload.sg_list,
+ job->request_payload.sg_cnt, req_data,
+ job->request_payload.payload_len);
/* make sure frame can always be built ... we copy
* back only the requested length */
- resp_data = kzalloc(max(blk_rq_bytes(rsp), 128U), GFP_KERNEL);
+ resp_data = kzalloc(max(job->reply_payload.payload_len, 128U),
+ GFP_KERNEL);
+ if (!resp_data)
+ goto out_free_req;
- if (!req_data || !resp_data) {
- error = -ENOMEM;
- goto out;
- }
-
- local_irq_disable();
- buf = kmap_atomic(bio_page(req->bio));
- memcpy(req_data, buf, blk_rq_bytes(req));
- kunmap_atomic(buf - bio_offset(req->bio));
- local_irq_enable();
-
+ error = -EINVAL;
if (req_data[0] != SMP_REQUEST)
- goto out;
-
- /* always succeeds ... even if we can't process the request
- * the result is in the response frame */
- error = 0;
+ goto out_free_resp;
/* set up default don't know response */
resp_data[0] = SMP_RESPONSE;
@@ -274,20 +263,18 @@
switch (req_data[1]) {
case SMP_REPORT_GENERAL:
- scsi_req(req)->resid_len -= 8;
- scsi_req(rsp)->resid_len -= 32;
resp_data[2] = SMP_RESP_FUNC_ACC;
resp_data[9] = sas_ha->num_phys;
+ reslen = 32;
break;
case SMP_REPORT_MANUF_INFO:
- scsi_req(req)->resid_len -= 8;
- scsi_req(rsp)->resid_len -= 64;
resp_data[2] = SMP_RESP_FUNC_ACC;
memcpy(resp_data + 12, shost->hostt->name,
SAS_EXPANDER_VENDOR_ID_LEN);
memcpy(resp_data + 20, "libsas virt phy",
SAS_EXPANDER_PRODUCT_ID_LEN);
+ reslen = 64;
break;
case SMP_READ_GPIO_REG:
@@ -295,14 +282,10 @@
break;
case SMP_DISCOVER:
- scsi_req(req)->resid_len -= 16;
- if ((int)scsi_req(req)->resid_len < 0) {
- scsi_req(req)->resid_len = 0;
- error = -EINVAL;
- goto out;
- }
- scsi_req(rsp)->resid_len -= 56;
+ if (job->request_payload.payload_len < 16)
+ goto out_free_resp;
sas_host_smp_discover(sas_ha, resp_data, req_data[9]);
+ reslen = 56;
break;
case SMP_REPORT_PHY_ERR_LOG:
@@ -311,14 +294,10 @@
break;
case SMP_REPORT_PHY_SATA:
- scsi_req(req)->resid_len -= 16;
- if ((int)scsi_req(req)->resid_len < 0) {
- scsi_req(req)->resid_len = 0;
- error = -EINVAL;
- goto out;
- }
- scsi_req(rsp)->resid_len -= 60;
+ if (job->request_payload.payload_len < 16)
+ goto out_free_resp;
sas_report_phy_sata(sas_ha, resp_data, req_data[9]);
+ reslen = 60;
break;
case SMP_REPORT_ROUTE_INFO:
@@ -330,16 +309,15 @@
const int base_frame_size = 11;
int to_write = req_data[4];
- if (blk_rq_bytes(req) < base_frame_size + to_write * 4 ||
- scsi_req(req)->resid_len < base_frame_size + to_write * 4) {
+ if (job->request_payload.payload_len <
+ base_frame_size + to_write * 4) {
resp_data[2] = SMP_RESP_INV_FRM_LEN;
break;
}
to_write = sas_host_smp_write_gpio(sas_ha, resp_data, req_data[2],
req_data[3], to_write, &req_data[8]);
- scsi_req(req)->resid_len -= base_frame_size + to_write * 4;
- scsi_req(rsp)->resid_len -= 8;
+ reslen = 8;
break;
}
@@ -348,16 +326,12 @@
break;
case SMP_PHY_CONTROL:
- scsi_req(req)->resid_len -= 44;
- if ((int)scsi_req(req)->resid_len < 0) {
- scsi_req(req)->resid_len = 0;
- error = -EINVAL;
- goto out;
- }
- scsi_req(rsp)->resid_len -= 8;
+ if (job->request_payload.payload_len < 44)
+ goto out_free_resp;
sas_phy_control(sas_ha, req_data[9], req_data[10],
req_data[32] >> 4, req_data[33] >> 4,
resp_data);
+ reslen = 8;
break;
case SMP_PHY_TEST_FUNCTION:
@@ -369,15 +343,15 @@
break;
}
- local_irq_disable();
- buf = kmap_atomic(bio_page(rsp->bio));
- memcpy(buf, resp_data, blk_rq_bytes(rsp));
- flush_kernel_dcache_page(bio_page(rsp->bio));
- kunmap_atomic(buf - bio_offset(rsp->bio));
- local_irq_enable();
+ sg_copy_from_buffer(job->reply_payload.sg_list,
+ job->reply_payload.sg_cnt, resp_data,
+ job->reply_payload.payload_len);
- out:
- kfree(req_data);
+ error = 0;
+out_free_resp:
kfree(resp_data);
- return error;
+out_free_req:
+ kfree(req_data);
+out:
+ bsg_job_done(job, error, reslen);
}
diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h
index a216c95..c07e081 100644
--- a/drivers/scsi/libsas/sas_internal.h
+++ b/drivers/scsi/libsas/sas_internal.h
@@ -81,6 +81,8 @@
int sas_notify_lldd_dev_found(struct domain_device *);
void sas_notify_lldd_dev_gone(struct domain_device *);
+void sas_smp_handler(struct bsg_job *job, struct Scsi_Host *shost,
+ struct sas_rphy *rphy);
int sas_smp_phy_control(struct domain_device *dev, int phy_id,
enum phy_func phy_func, struct sas_phy_linkrates *);
int sas_smp_get_phy_events(struct sas_phy *phy);
@@ -98,16 +100,14 @@
void sas_free_device(struct kref *kref);
#ifdef CONFIG_SCSI_SAS_HOST_SMP
-extern int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
- struct request *rsp);
+extern void sas_smp_host_handler(struct bsg_job *job, struct Scsi_Host *shost);
#else
-static inline int sas_smp_host_handler(struct Scsi_Host *shost,
- struct request *req,
- struct request *rsp)
+static inline void sas_smp_host_handler(struct bsg_job *job,
+ struct Scsi_Host *shost)
{
shost_printk(KERN_ERR, shost,
"Cannot send SMP to a sas host (not enabled in CONFIG)\n");
- return -EINVAL;
+ bsg_job_done(job, -EINVAL, 0);
}
#endif
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index 87e5079..ea8ad06 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -526,7 +526,7 @@
return FAILED;
}
-int sas_eh_bus_reset_handler(struct scsi_cmnd *cmd)
+int sas_eh_target_reset_handler(struct scsi_cmnd *cmd)
{
int res;
struct Scsi_Host *host = cmd->device->host;
@@ -554,15 +554,15 @@
struct Scsi_Host *shost = cmd->device->host;
if (!shost->hostt->eh_device_reset_handler)
- goto try_bus_reset;
+ goto try_target_reset;
res = shost->hostt->eh_device_reset_handler(cmd);
if (res == SUCCESS)
return res;
-try_bus_reset:
- if (shost->hostt->eh_bus_reset_handler)
- return shost->hostt->eh_bus_reset_handler(cmd);
+try_target_reset:
+ if (shost->hostt->eh_target_reset_handler)
+ return shost->hostt->eh_target_reset_handler(cmd);
return FAILED;
}
@@ -855,7 +855,6 @@
int sas_slave_configure(struct scsi_device *scsi_dev)
{
struct domain_device *dev = sdev_to_domain_dev(scsi_dev);
- struct sas_ha_struct *sas_ha;
BUG_ON(dev->rphy->identify.device_type != SAS_END_DEVICE);
@@ -864,8 +863,6 @@
return 0;
}
- sas_ha = dev->port->ha;
-
sas_read_port_mode_page(scsi_dev);
if (scsi_dev->tagged_supported) {
@@ -996,6 +993,6 @@
EXPORT_SYMBOL_GPL(sas_task_abort);
EXPORT_SYMBOL_GPL(sas_phy_reset);
EXPORT_SYMBOL_GPL(sas_eh_device_reset_handler);
-EXPORT_SYMBOL_GPL(sas_eh_bus_reset_handler);
+EXPORT_SYMBOL_GPL(sas_eh_target_reset_handler);
EXPORT_SYMBOL_GPL(sas_target_destroy);
EXPORT_SYMBOL_GPL(sas_ioctl);
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 562dc01..8eb3f96 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -733,7 +733,6 @@
uint32_t fc_rttov; /* R_T_TOV timer value */
uint32_t fc_altov; /* AL_TOV timer value */
uint32_t fc_crtov; /* C_R_TOV timer value */
- uint32_t fc_citov; /* C_I_TOV timer value */
struct serv_parm fc_fabparam; /* fabric service parameters buffer */
uint8_t alpa_map[128]; /* AL_PA map from READ_LA */
@@ -757,6 +756,7 @@
#define LPFC_NVMET_MAX_PORTS 32
uint8_t mds_diags_support;
uint32_t initial_imax;
+ uint8_t bbcredit_support;
/* HBA Config Parameters */
uint32_t cfg_ack0;
@@ -836,6 +836,7 @@
uint32_t cfg_enable_SmartSAN;
uint32_t cfg_enable_mds_diags;
uint32_t cfg_enable_fc4_type;
+ uint32_t cfg_enable_bbcr; /*Enable BB Credit Recovery*/
uint32_t cfg_xri_split;
#define LPFC_ENABLE_FCP 1
#define LPFC_ENABLE_NVME 2
@@ -946,14 +947,14 @@
struct list_head active_rrq_list;
spinlock_t hbalock;
- /* pci_mem_pools */
- struct pci_pool *lpfc_sg_dma_buf_pool;
- struct pci_pool *lpfc_mbuf_pool;
- struct pci_pool *lpfc_hrb_pool; /* header receive buffer pool */
- struct pci_pool *lpfc_drb_pool; /* data receive buffer pool */
- struct pci_pool *lpfc_nvmet_drb_pool; /* data receive buffer pool */
- struct pci_pool *lpfc_hbq_pool; /* SLI3 hbq buffer pool */
- struct pci_pool *txrdy_payload_pool;
+ /* dma_mem_pools */
+ struct dma_pool *lpfc_sg_dma_buf_pool;
+ struct dma_pool *lpfc_mbuf_pool;
+ struct dma_pool *lpfc_hrb_pool; /* header receive buffer pool */
+ struct dma_pool *lpfc_drb_pool; /* data receive buffer pool */
+ struct dma_pool *lpfc_nvmet_drb_pool; /* data receive buffer pool */
+ struct dma_pool *lpfc_hbq_pool; /* SLI3 hbq buffer pool */
+ struct dma_pool *txrdy_payload_pool;
struct lpfc_dma_pool lpfc_mbuf_safety_pool;
mempool_t *mbox_mem_pool;
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 4ed48ed..0806323 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -245,13 +245,10 @@
atomic_read(&tgtp->xmt_abort_rsp),
atomic_read(&tgtp->xmt_abort_rsp_error));
- spin_lock(&phba->sli4_hba.nvmet_ctx_get_lock);
- spin_lock(&phba->sli4_hba.nvmet_ctx_put_lock);
- tot = phba->sli4_hba.nvmet_xri_cnt -
- (phba->sli4_hba.nvmet_ctx_get_cnt +
- phba->sli4_hba.nvmet_ctx_put_cnt);
- spin_unlock(&phba->sli4_hba.nvmet_ctx_put_lock);
- spin_unlock(&phba->sli4_hba.nvmet_ctx_get_lock);
+ /* Calculate outstanding IOs */
+ tot = atomic_read(&tgtp->rcv_fcp_cmd_drop);
+ tot += atomic_read(&tgtp->xmt_fcp_release);
+ tot = atomic_read(&tgtp->rcv_fcp_cmd_in) - tot;
len += snprintf(buf + len, PAGE_SIZE - len,
"IO_CTX: %08x WAIT: cur %08x tot %08x\n"
@@ -1892,6 +1889,36 @@
}
/**
+ * lpfc_enable_bbcr_set: Sets an attribute value.
+ * @phba: pointer the the adapter structure.
+ * @val: integer attribute value.
+ *
+ * Description:
+ * Validates the min and max values then sets the
+ * adapter config field if in the valid range. prints error message
+ * and does not set the parameter if invalid.
+ *
+ * Returns:
+ * zero on success
+ * -EINVAL if val is invalid
+ */
+static ssize_t
+lpfc_enable_bbcr_set(struct lpfc_hba *phba, uint val)
+{
+ if (lpfc_rangecheck(val, 0, 1) && phba->sli_rev == LPFC_SLI_REV4) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3068 %s_enable_bbcr changed from %d to %d\n",
+ LPFC_DRIVER_NAME, phba->cfg_enable_bbcr, val);
+ phba->cfg_enable_bbcr = val;
+ return 0;
+ }
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0451 %s_enable_bbcr cannot set to %d, range is 0, 1\n",
+ LPFC_DRIVER_NAME, val);
+ return -EINVAL;
+}
+
+/**
* lpfc_param_show - Return a cfg attribute value in decimal
*
* Description:
@@ -5114,6 +5141,14 @@
*/
LPFC_ATTR_R(enable_mds_diags, 0, 0, 1, "Enable MDS Diagnostics");
+/*
+ * lpfc_enable_bbcr: Enable BB Credit Recovery
+ * 0 = BB Credit Recovery disabled
+ * 1 = BB Credit Recovery enabled (default)
+ * Value range is [0,1]. Default value is 1.
+ */
+LPFC_BBCR_ATTR_RW(enable_bbcr, 1, 0, 1, "Enable BBC Recovery");
+
struct device_attribute *lpfc_hba_attrs[] = {
&dev_attr_nvme_info,
&dev_attr_bg_info,
@@ -5221,6 +5256,7 @@
&dev_attr_protocol,
&dev_attr_lpfc_xlane_supported,
&dev_attr_lpfc_enable_mds_diags,
+ &dev_attr_lpfc_enable_bbcr,
NULL,
};
@@ -6232,11 +6268,13 @@
lpfc_nvmet_fb_size_init(phba, lpfc_nvmet_fb_size);
lpfc_fcp_io_channel_init(phba, lpfc_fcp_io_channel);
lpfc_nvme_io_channel_init(phba, lpfc_nvme_io_channel);
+ lpfc_enable_bbcr_init(phba, lpfc_enable_bbcr);
if (phba->sli_rev != LPFC_SLI_REV4) {
/* NVME only supported on SLI4 */
phba->nvmet_support = 0;
phba->cfg_enable_fc4_type = LPFC_ENABLE_FCP;
+ phba->cfg_enable_bbcr = 0;
} else {
/* We MUST have FCP support */
if (!(phba->cfg_enable_fc4_type & LPFC_ENABLE_FCP))
diff --git a/drivers/scsi/lpfc/lpfc_attr.h b/drivers/scsi/lpfc/lpfc_attr.h
index d56dafc..931db52 100644
--- a/drivers/scsi/lpfc/lpfc_attr.h
+++ b/drivers/scsi/lpfc/lpfc_attr.h
@@ -46,6 +46,16 @@
static DEVICE_ATTR(lpfc_##name, S_IRUGO | S_IWUSR,\
lpfc_##name##_show, lpfc_##name##_store)
+#define LPFC_BBCR_ATTR_RW(name, defval, minval, maxval, desc) \
+static uint lpfc_##name = defval;\
+module_param(lpfc_##name, uint, 0444);\
+MODULE_PARM_DESC(lpfc_##name, desc);\
+lpfc_param_show(name)\
+lpfc_param_init(name, defval, minval, maxval)\
+lpfc_param_store(name)\
+static DEVICE_ATTR(lpfc_##name, 0444 | 0644,\
+ lpfc_##name##_show, lpfc_##name##_store)
+
#define LPFC_ATTR_HEX_R(name, defval, minval, maxval, desc) \
static uint lpfc_##name = defval;\
module_param(lpfc_##name, uint, S_IRUGO);\
diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c
index a1686c2..fe9e1c0 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.c
+++ b/drivers/scsi/lpfc/lpfc_bsg.c
@@ -2384,20 +2384,17 @@
goto job_error;
pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
- if (!pmboxq) {
- rc = -ENOMEM;
+ if (!pmboxq)
goto link_diag_test_exit;
- }
req_len = (sizeof(struct lpfc_mbx_set_link_diag_state) -
sizeof(struct lpfc_sli4_cfg_mhdr));
alloc_len = lpfc_sli4_config(phba, pmboxq, LPFC_MBOX_SUBSYSTEM_FCOE,
LPFC_MBOX_OPCODE_FCOE_LINK_DIAG_STATE,
req_len, LPFC_SLI4_MBX_EMBED);
- if (alloc_len != req_len) {
- rc = -ENOMEM;
+ if (alloc_len != req_len)
goto link_diag_test_exit;
- }
+
run_link_diag_test = &pmboxq->u.mqe.un.link_diag_test;
bf_set(lpfc_mbx_run_diag_test_link_num, &run_link_diag_test->u.req,
phba->sli4_hba.lnk_info.lnk_no);
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index da669dc..7e30073 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -556,9 +556,8 @@
void lpfc_nvmet_destroy_targetport(struct lpfc_hba *phba);
void lpfc_nvmet_unsol_ls_event(struct lpfc_hba *phba,
struct lpfc_sli_ring *pring, struct lpfc_iocbq *piocb);
-void lpfc_nvmet_unsol_fcp_event(struct lpfc_hba *phba,
- struct lpfc_sli_ring *pring,
- struct rqb_dmabuf *nvmebuf, uint64_t isr_ts);
+void lpfc_nvmet_unsol_fcp_event(struct lpfc_hba *phba, uint32_t idx,
+ struct rqb_dmabuf *nvmebuf, uint64_t isr_ts);
void lpfc_nvme_mod_param_dep(struct lpfc_hba *phba);
void lpfc_nvme_abort_fcreq_cmpl(struct lpfc_hba *phba,
struct lpfc_iocbq *cmdiocb,
diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index 9c0c146..3341768 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -955,7 +955,7 @@
CTrsp = (struct lpfc_sli_ct_request *)outp->virt;
fc4_data_0 = be32_to_cpu(CTrsp->un.gft_acc.fc4_types[0]);
fc4_data_1 = be32_to_cpu(CTrsp->un.gft_acc.fc4_types[1]);
- lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"3062 DID x%06x GFT Wd0 x%08x Wd1 x%08x\n",
did, fc4_data_0, fc4_data_1);
@@ -969,7 +969,7 @@
ndlp->nlp_fc4_type |= NLP_FC4_FCP;
if (fc4_data_1 & LPFC_FC4_TYPE_BITMASK)
ndlp->nlp_fc4_type |= NLP_FC4_NVME;
- lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"3064 Setting ndlp %p, DID x%06x with "
"FC4 x%08x, Data: x%08x x%08x\n",
ndlp, did, ndlp->nlp_fc4_type,
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index 5cc8b0f..c292264 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -848,13 +848,10 @@
spin_unlock(&phba->sli4_hba.abts_nvme_buf_list_lock);
}
- spin_lock(&phba->sli4_hba.nvmet_ctx_get_lock);
- spin_lock(&phba->sli4_hba.nvmet_ctx_put_lock);
- tot = phba->sli4_hba.nvmet_xri_cnt -
- (phba->sli4_hba.nvmet_ctx_get_cnt +
- phba->sli4_hba.nvmet_ctx_put_cnt);
- spin_unlock(&phba->sli4_hba.nvmet_ctx_put_lock);
- spin_unlock(&phba->sli4_hba.nvmet_ctx_get_lock);
+ /* Calculate outstanding IOs */
+ tot = atomic_read(&tgtp->rcv_fcp_cmd_drop);
+ tot += atomic_read(&tgtp->xmt_fcp_release);
+ tot = atomic_read(&tgtp->rcv_fcp_cmd_in) - tot;
len += snprintf(buf + len, size - len,
"IO_CTX: %08x WAIT: cur %08x tot %08x\n"
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.h b/drivers/scsi/lpfc/lpfc_debugfs.h
index 7b7d314..c4edd87 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.h
+++ b/drivers/scsi/lpfc/lpfc_debugfs.h
@@ -478,16 +478,16 @@
return;
for (eqidx = 0; eqidx < phba->io_channel_irqs; eqidx++) {
- eq = phba->sli4_hba.hba_eq[eqidx];
- if (cq->assoc_qid == eq->queue_id)
+ if (cq->assoc_qid == phba->sli4_hba.hba_eq[eqidx]->queue_id)
break;
}
if (eqidx == phba->io_channel_irqs) {
pr_err("Couldn't find EQ for CQ. Using EQ[0]\n");
eqidx = 0;
- eq = phba->sli4_hba.hba_eq[0];
}
+ eq = phba->sli4_hba.hba_eq[eqidx];
+
if (qtype == DUMP_FCP || qtype == DUMP_NVME)
pr_err("%s CQ: WQ[Idx:%d|Qid%d]->CQ[Idx%d|Qid%d]"
"->EQ[Idx:%d|Qid:%d]:\n",
diff --git a/drivers/scsi/lpfc/lpfc_disc.h b/drivers/scsi/lpfc/lpfc_disc.h
index 094c97b..f9a566e 100644
--- a/drivers/scsi/lpfc/lpfc_disc.h
+++ b/drivers/scsi/lpfc/lpfc_disc.h
@@ -159,6 +159,7 @@
#define NLP_RNID_SND 0x00000400 /* sent RNID request for this entry */
#define NLP_ELS_SND_MASK 0x000007e0 /* sent ELS request for this entry */
#define NLP_NVMET_RECOV 0x00001000 /* NVMET auditing node for recovery. */
+#define NLP_FCP_PRLI_RJT 0x00002000 /* Rport does not support FCP PRLI. */
#define NLP_DEFER_RM 0x00010000 /* Remove this ndlp if no longer used */
#define NLP_DELAY_TMO 0x00020000 /* delay timeout is running for node */
#define NLP_NPR_2B_DISC 0x00040000 /* node is included in num_disc_nodes */
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 6d1d6f6..468a663 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1527,6 +1527,7 @@
uint8_t name[sizeof(struct lpfc_name)];
uint32_t rc, keepDID = 0, keep_nlp_flag = 0;
uint16_t keep_nlp_state;
+ struct lpfc_nvme_rport *keep_nrport = NULL;
int put_node;
int put_rport;
unsigned long *active_rrqs_xri_bitmap = NULL;
@@ -1624,6 +1625,10 @@
keep_nlp_state = new_ndlp->nlp_state;
lpfc_nlp_set_state(vport, new_ndlp, ndlp->nlp_state);
+ /* interchange the nvme remoteport structs */
+ keep_nrport = new_ndlp->nrport;
+ new_ndlp->nrport = ndlp->nrport;
+
/* Move this back to NPR state */
if (memcmp(&ndlp->nlp_portname, name, sizeof(struct lpfc_name)) == 0) {
/* The new_ndlp is replacing ndlp totally, so we need
@@ -1646,6 +1651,13 @@
}
new_ndlp->nlp_type = ndlp->nlp_type;
}
+
+ /* Fix up the nvme rport */
+ if (ndlp->nrport) {
+ ndlp->nrport = NULL;
+ lpfc_nlp_put(ndlp);
+ }
+
/* We shall actually free the ndlp with both nlp_DID and
* nlp_portname fields equals 0 to avoid any ndlp on the
* nodelist never to be used.
@@ -1690,6 +1702,14 @@
keep_nlp_state = NLP_STE_NPR_NODE;
lpfc_nlp_set_state(vport, ndlp, keep_nlp_state);
+ /* Previous ndlp no longer active with nvme host transport.
+ * Remove reference from earlier registration unless the
+ * nvme host took care of it.
+ */
+ if (ndlp->nrport)
+ lpfc_nlp_put(ndlp);
+ ndlp->nrport = keep_nrport;
+
/* Fix up the rport accordingly */
rport = ndlp->rport;
if (rport) {
@@ -1966,6 +1986,7 @@
lpfc_issue_els_plogi(struct lpfc_vport *vport, uint32_t did, uint8_t retry)
{
struct lpfc_hba *phba = vport->phba;
+ struct Scsi_Host *shost;
struct serv_parm *sp;
struct lpfc_nodelist *ndlp;
struct lpfc_iocbq *elsiocb;
@@ -1984,6 +2005,11 @@
if (!elsiocb)
return 1;
+ shost = lpfc_shost_from_vport(vport);
+ spin_lock_irq(shost->host_lock);
+ ndlp->nlp_flag &= ~NLP_FCP_PRLI_RJT;
+ spin_unlock_irq(shost->host_lock);
+
pcmd = (uint8_t *) (((struct lpfc_dmabuf *) elsiocb->context2)->virt);
/* For PLOGI request, remainder of payload is service parameters */
@@ -2007,6 +2033,7 @@
sp->cmn.valid_vendor_ver_level = 0;
memset(sp->un.vendorVersion, 0, sizeof(sp->un.vendorVersion));
+ sp->cmn.bbRcvSizeMsb &= 0xF;
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
"Issue PLOGI: did:x%x",
@@ -2151,6 +2178,16 @@
uint16_t cmdsize;
u32 local_nlp_type, elscmd;
+ /*
+ * If we are in RSCN mode, the FC4 types supported from a
+ * previous GFT_ID command may not be accurate. So, if we
+ * are a NVME Initiator, always look for the possibility of
+ * the remote NPort beng a NVME Target.
+ */
+ if (phba->sli_rev == LPFC_SLI_REV4 &&
+ vport->fc_flag & FC_RSCN_MODE &&
+ vport->nvmei_support)
+ ndlp->nlp_fc4_type |= NLP_FC4_NVME;
local_nlp_type = ndlp->nlp_fc4_type;
send_next_prli:
@@ -3420,8 +3457,18 @@
maxretry = 3;
delay = 1000;
retry = 1;
- break;
+ } else if (cmd == ELS_CMD_FLOGI &&
+ stat.un.b.lsRjtRsnCodeExp ==
+ LSEXP_NOTHING_MORE) {
+ vport->fc_sparam.cmn.bbRcvSizeMsb &= 0xf;
+ retry = 1;
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+ "0820 FLOGI Failed (x%x). "
+ "BBCredit Not Supported\n",
+ stat.un.lsRjtError);
}
+ break;
+
case LSRJT_PROTOCOL_ERR:
if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) &&
(cmd == ELS_CMD_FDISC) &&
@@ -3442,6 +3489,21 @@
goto out_retry;
}
break;
+ case LSRJT_CMD_UNSUPPORTED:
+ /* lpfc nvmet returns this type of LS_RJT when it
+ * receives an FCP PRLI because lpfc nvmet only
+ * support NVME. ELS request is terminated for FCP4
+ * on this rport.
+ */
+ if (stat.un.b.lsRjtRsnCodeExp ==
+ LSEXP_REQ_UNSUPPORTED && cmd == ELS_CMD_PRLI) {
+ spin_lock_irq(shost->host_lock);
+ ndlp->nlp_flag |= NLP_FCP_PRLI_RJT;
+ spin_unlock_irq(shost->host_lock);
+ retry = 0;
+ goto out_retry;
+ }
+ break;
}
break;
@@ -3930,7 +3992,25 @@
if (mbox) {
if ((rspiocb->iocb.ulpStatus == 0)
&& (ndlp->nlp_flag & NLP_ACC_REGLOGIN)) {
- lpfc_unreg_rpi(vport, ndlp);
+ if (!lpfc_unreg_rpi(vport, ndlp) &&
+ (ndlp->nlp_state == NLP_STE_PLOGI_ISSUE ||
+ ndlp->nlp_state == NLP_STE_REG_LOGIN_ISSUE)) {
+ lpfc_printf_vlog(vport, KERN_INFO,
+ LOG_DISCOVERY,
+ "0314 PLOGI recov DID x%x "
+ "Data: x%x x%x x%x\n",
+ ndlp->nlp_DID, ndlp->nlp_state,
+ ndlp->nlp_rpi, ndlp->nlp_flag);
+ mp = mbox->context1;
+ if (mp) {
+ lpfc_mbuf_free(phba, mp->virt,
+ mp->phys);
+ kfree(mp);
+ }
+ mempool_free(mbox, phba->mbox_mem_pool);
+ goto out;
+ }
+
/* Increment reference count to ndlp to hold the
* reference to ndlp for the callback function.
*/
@@ -4132,6 +4212,7 @@
sp->cmn.valid_vendor_ver_level = 0;
memset(sp->un.vendorVersion, 0,
sizeof(sp->un.vendorVersion));
+ sp->cmn.bbRcvSizeMsb &= 0xF;
/* If our firmware supports this feature, convey that
* info to the target using the vendor specific field.
@@ -7989,6 +8070,13 @@
rjt_exp = LSEXP_NOTHING_MORE;
break;
}
+
+ /* NVMET accepts NVME PRLI only. Reject FCP PRLI */
+ if (cmd == ELS_CMD_PRLI && phba->nvmet_support) {
+ rjt_err = LSRJT_CMD_UNSUPPORTED;
+ rjt_exp = LSEXP_REQ_UNSUPPORTED;
+ break;
+ }
lpfc_disc_state_machine(vport, ndlp, elsiocb, NLP_EVT_RCV_PRLI);
break;
case ELS_CMD_LIRR:
@@ -8784,6 +8872,7 @@
pcmd += sizeof(uint32_t); /* Node Name */
pcmd += sizeof(uint32_t); /* Node Name */
memcpy(pcmd, &vport->fc_nodename, 8);
+ sp->cmn.valid_vendor_ver_level = 0;
memset(sp->un.vendorVersion, 0, sizeof(sp->un.vendorVersion));
lpfc_set_disctmo(vport);
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index aa5e5ff..2080834 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1108,6 +1108,7 @@
lpfc_mbx_cmpl_local_config_link(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
struct lpfc_vport *vport = pmb->vport;
+ uint8_t bbscn = 0;
if (pmb->u.mb.mbxStatus)
goto out;
@@ -1134,10 +1135,17 @@
/* Start discovery by sending a FLOGI. port_state is identically
* LPFC_FLOGI while waiting for FLOGI cmpl
*/
- if (vport->port_state != LPFC_FLOGI)
+ if (vport->port_state != LPFC_FLOGI) {
+ if (phba->bbcredit_support && phba->cfg_enable_bbcr) {
+ bbscn = bf_get(lpfc_bbscn_def,
+ &phba->sli4_hba.bbscn_params);
+ vport->fc_sparam.cmn.bbRcvSizeMsb &= 0xf;
+ vport->fc_sparam.cmn.bbRcvSizeMsb |= (bbscn << 4);
+ }
lpfc_initial_flogi(vport);
- else if (vport->fc_flag & FC_PT2PT)
+ } else if (vport->fc_flag & FC_PT2PT) {
lpfc_disc_start(vport);
+ }
return;
out:
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index 26a5647..bdc1f18 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -2293,15 +2293,27 @@
uint32_t rttov;
uint32_t altov;
uint32_t crtov;
- uint32_t citov;
+
+#ifdef __BIG_ENDIAN_BITFIELD
+ uint32_t rsvd4:19;
+ uint32_t cscn:1;
+ uint32_t bbscn:4;
+ uint32_t rsvd3:8;
+#else /* __LITTLE_ENDIAN_BITFIELD */
+ uint32_t rsvd3:8;
+ uint32_t bbscn:4;
+ uint32_t cscn:1;
+ uint32_t rsvd4:19;
+#endif
+
#ifdef __BIG_ENDIAN_BITFIELD
uint32_t rrq_enable:1;
uint32_t rrq_immed:1;
- uint32_t rsvd4:29;
+ uint32_t rsvd5:29;
uint32_t ack0_enable:1;
#else /* __LITTLE_ENDIAN_BITFIELD */
uint32_t ack0_enable:1;
- uint32_t rsvd4:29;
+ uint32_t rsvd5:29;
uint32_t rrq_immed:1;
uint32_t rrq_enable:1;
#endif
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index bb47157..1db0a38 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -2217,9 +2217,15 @@
uint32_t e_d_tov;
uint32_t r_a_tov;
uint32_t word10;
-#define lpfc_reg_vfi_nport_id_SHIFT 0
-#define lpfc_reg_vfi_nport_id_MASK 0x00FFFFFF
-#define lpfc_reg_vfi_nport_id_WORD word10
+#define lpfc_reg_vfi_nport_id_SHIFT 0
+#define lpfc_reg_vfi_nport_id_MASK 0x00FFFFFF
+#define lpfc_reg_vfi_nport_id_WORD word10
+#define lpfc_reg_vfi_bbcr_SHIFT 27
+#define lpfc_reg_vfi_bbcr_MASK 0x00000001
+#define lpfc_reg_vfi_bbcr_WORD word10
+#define lpfc_reg_vfi_bbscn_SHIFT 28
+#define lpfc_reg_vfi_bbscn_MASK 0x0000000F
+#define lpfc_reg_vfi_bbscn_WORD word10
};
struct lpfc_mbx_init_vpi {
@@ -2646,7 +2652,16 @@
#define lpfc_mbx_rd_conf_link_speed_MASK 0x0000FFFF
#define lpfc_mbx_rd_conf_link_speed_WORD word6
uint32_t rsvd_7;
- uint32_t rsvd_8;
+ uint32_t word8;
+#define lpfc_mbx_rd_conf_bbscn_min_SHIFT 0
+#define lpfc_mbx_rd_conf_bbscn_min_MASK 0x0000000F
+#define lpfc_mbx_rd_conf_bbscn_min_WORD word8
+#define lpfc_mbx_rd_conf_bbscn_max_SHIFT 4
+#define lpfc_mbx_rd_conf_bbscn_max_MASK 0x0000000F
+#define lpfc_mbx_rd_conf_bbscn_max_WORD word8
+#define lpfc_mbx_rd_conf_bbscn_def_SHIFT 8
+#define lpfc_mbx_rd_conf_bbscn_def_MASK 0x0000000F
+#define lpfc_mbx_rd_conf_bbscn_def_WORD word8
uint32_t word9;
#define lpfc_mbx_rd_conf_lmt_SHIFT 0
#define lpfc_mbx_rd_conf_lmt_MASK 0x0000FFFF
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 491aa95..7e7ae78 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -37,6 +37,7 @@
#include <linux/miscdevice.h>
#include <linux/percpu.h>
#include <linux/msi.h>
+#include <linux/bitops.h>
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
@@ -1253,6 +1254,7 @@
unsigned long time_elapsed;
uint32_t tick_cqe, max_cqe, val;
uint64_t tot, data1, data2, data3;
+ struct lpfc_nvmet_tgtport *tgtp;
struct lpfc_register reg_data;
void __iomem *eqdreg = phba->sli4_hba.u.if_type2.EQDregaddr;
@@ -1281,13 +1283,11 @@
/* Check outstanding IO count */
if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) {
if (phba->nvmet_support) {
- spin_lock(&phba->sli4_hba.nvmet_ctx_get_lock);
- spin_lock(&phba->sli4_hba.nvmet_ctx_put_lock);
- tot = phba->sli4_hba.nvmet_xri_cnt -
- (phba->sli4_hba.nvmet_ctx_get_cnt +
- phba->sli4_hba.nvmet_ctx_put_cnt);
- spin_unlock(&phba->sli4_hba.nvmet_ctx_put_lock);
- spin_unlock(&phba->sli4_hba.nvmet_ctx_get_lock);
+ tgtp = phba->targetport->private;
+ /* Calculate outstanding IOs */
+ tot = atomic_read(&tgtp->rcv_fcp_cmd_drop);
+ tot += atomic_read(&tgtp->xmt_fcp_release);
+ tot = atomic_read(&tgtp->rcv_fcp_cmd_in) - tot;
} else {
tot = atomic_read(&phba->fc4NvmeIoCmpls);
data1 = atomic_read(
@@ -3048,7 +3048,7 @@
{
struct lpfc_vport *vport;
struct lpfc_vport **vports;
- int i;
+ int i, error = 0;
bool vpis_cleared = false;
if (!phba)
@@ -3072,6 +3072,18 @@
if (!phba->sli4_hba.max_cfg_param.vpi_used)
vpis_cleared = true;
spin_unlock_irq(&phba->hbalock);
+
+ /* Reestablish the local initiator port.
+ * The offline process destroyed the previous lport.
+ */
+ if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME &&
+ !phba->nvmet_support) {
+ error = lpfc_nvme_create_localport(phba->pport);
+ if (error)
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "6132 NVME restore reg failed "
+ "on nvmei error x%x\n", error);
+ }
} else {
lpfc_sli_queue_init(phba);
if (lpfc_sli_hba_setup(phba)) { /* Initialize SLI2/SLI3 HBA */
@@ -3226,6 +3238,13 @@
/* stop port and all timers associated with this hba */
lpfc_stop_port(phba);
+
+ /* Tear down the local and target port registrations. The
+ * nvme transports need to cleanup.
+ */
+ lpfc_nvmet_destroy_targetport(phba);
+ lpfc_nvme_destroy_localport(phba->pport);
+
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++)
@@ -3275,7 +3294,7 @@
list_for_each_entry_safe(sb, sb_next, &phba->lpfc_scsi_buf_list_put,
list) {
list_del(&sb->list);
- pci_pool_free(phba->lpfc_sg_dma_buf_pool, sb->data,
+ dma_pool_free(phba->lpfc_sg_dma_buf_pool, sb->data,
sb->dma_handle);
kfree(sb);
phba->total_scsi_bufs--;
@@ -3286,7 +3305,7 @@
list_for_each_entry_safe(sb, sb_next, &phba->lpfc_scsi_buf_list_get,
list) {
list_del(&sb->list);
- pci_pool_free(phba->lpfc_sg_dma_buf_pool, sb->data,
+ dma_pool_free(phba->lpfc_sg_dma_buf_pool, sb->data,
sb->dma_handle);
kfree(sb);
phba->total_scsi_bufs--;
@@ -3317,7 +3336,7 @@
list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next,
&phba->lpfc_nvme_buf_list_put, list) {
list_del(&lpfc_ncmd->list);
- pci_pool_free(phba->lpfc_sg_dma_buf_pool, lpfc_ncmd->data,
+ dma_pool_free(phba->lpfc_sg_dma_buf_pool, lpfc_ncmd->data,
lpfc_ncmd->dma_handle);
kfree(lpfc_ncmd);
phba->total_nvme_bufs--;
@@ -3328,7 +3347,7 @@
list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next,
&phba->lpfc_nvme_buf_list_get, list) {
list_del(&lpfc_ncmd->list);
- pci_pool_free(phba->lpfc_sg_dma_buf_pool, lpfc_ncmd->data,
+ dma_pool_free(phba->lpfc_sg_dma_buf_pool, lpfc_ncmd->data,
lpfc_ncmd->dma_handle);
kfree(lpfc_ncmd);
phba->total_nvme_bufs--;
@@ -3640,7 +3659,7 @@
list_remove_head(&scsi_sgl_list, psb,
struct lpfc_scsi_buf, list);
if (psb) {
- pci_pool_free(phba->lpfc_sg_dma_buf_pool,
+ dma_pool_free(phba->lpfc_sg_dma_buf_pool,
psb->data, psb->dma_handle);
kfree(psb);
}
@@ -3710,9 +3729,7 @@
if (phba->sli_rev == LPFC_SLI_REV4)
return be64_to_cpu(wwn);
else
- return (((wwn & 0xffffffff00000000) >> 32) |
- ((wwn & 0x00000000ffffffff) << 32));
-
+ return rol64(wwn, 32);
}
/**
@@ -3774,7 +3791,7 @@
list_remove_head(&nvme_sgl_list, lpfc_ncmd,
struct lpfc_nvme_buf, list);
if (lpfc_ncmd) {
- pci_pool_free(phba->lpfc_sg_dma_buf_pool,
+ dma_pool_free(phba->lpfc_sg_dma_buf_pool,
lpfc_ncmd->data,
lpfc_ncmd->dma_handle);
kfree(lpfc_ncmd);
@@ -5930,8 +5947,6 @@
spin_lock_init(&phba->sli4_hba.abts_nvme_buf_list_lock);
INIT_LIST_HEAD(&phba->sli4_hba.lpfc_abts_nvme_buf_list);
INIT_LIST_HEAD(&phba->sli4_hba.lpfc_abts_nvmet_ctx_list);
- INIT_LIST_HEAD(&phba->sli4_hba.lpfc_nvmet_ctx_get_list);
- INIT_LIST_HEAD(&phba->sli4_hba.lpfc_nvmet_ctx_put_list);
INIT_LIST_HEAD(&phba->sli4_hba.lpfc_nvmet_io_wait_list);
/* Fast-path XRI aborted CQ Event work queue list */
@@ -5940,8 +5955,6 @@
/* This abort list used by worker thread */
spin_lock_init(&phba->sli4_hba.sgl_list_lock);
- spin_lock_init(&phba->sli4_hba.nvmet_ctx_get_lock);
- spin_lock_init(&phba->sli4_hba.nvmet_ctx_put_lock);
spin_lock_init(&phba->sli4_hba.nvmet_io_wait_lock);
/*
@@ -6516,6 +6529,12 @@
lpfc_nvmet_buf_free(phba, sglq_entry->virt, sglq_entry->phys);
kfree(sglq_entry);
}
+
+ /* Update the nvmet_xri_cnt to reflect no current sgls.
+ * The next initialization cycle sets the count and allocates
+ * the sgls over again.
+ */
+ phba->sli4_hba.nvmet_xri_cnt = 0;
}
/**
@@ -6846,8 +6865,8 @@
if (phba->nvmet_support) {
/* Only 1 vport (pport) will support NVME target */
if (phba->txrdy_payload_pool == NULL) {
- phba->txrdy_payload_pool = pci_pool_create(
- "txrdy_pool", phba->pcidev,
+ phba->txrdy_payload_pool = dma_pool_create(
+ "txrdy_pool", &phba->pcidev->dev,
TXRDY_PAYLOAD_LEN, 16, 0);
if (phba->txrdy_payload_pool) {
phba->targetport = NULL;
@@ -7605,6 +7624,11 @@
lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
"3082 Mailbox (x%x) returned ldv:x0\n",
bf_get(lpfc_mqe_command, &pmb->u.mqe));
+ if (bf_get(lpfc_mbx_rd_conf_bbscn_def, rd_config)) {
+ phba->bbcredit_support = 1;
+ phba->sli4_hba.bbscn_params.word0 = rd_config->word8;
+ }
+
phba->sli4_hba.extents_in_use =
bf_get(lpfc_mbx_rd_conf_extnts_inuse, rd_config);
phba->sli4_hba.max_cfg_param.max_xri =
@@ -8301,6 +8325,9 @@
goto out_error;
}
+ /* Put list in known state in case driver load fails. */
+ INIT_LIST_HEAD(&qdesc->rqbp->rqb_buffer_list);
+
/* Create NVMET Receive Queue for data */
qdesc = lpfc_sli4_queue_alloc(phba,
phba->sli4_hba.rq_esize,
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index ce25a18..81fb929 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -376,7 +376,12 @@
mb->un.varCfgLnk.rttov = phba->fc_rttov;
mb->un.varCfgLnk.altov = phba->fc_altov;
mb->un.varCfgLnk.crtov = phba->fc_crtov;
- mb->un.varCfgLnk.citov = phba->fc_citov;
+ mb->un.varCfgLnk.cscn = 0;
+ if (phba->bbcredit_support && phba->cfg_enable_bbcr) {
+ mb->un.varCfgLnk.cscn = 1;
+ mb->un.varCfgLnk.bbscn = bf_get(lpfc_bbscn_def,
+ &phba->sli4_hba.bbscn_params);
+ }
if (phba->cfg_ack0 && (phba->sli_rev < LPFC_SLI_REV4))
mb->un.varCfgLnk.ack0_enable = 1;
@@ -2139,6 +2144,7 @@
{
struct lpfc_mbx_reg_vfi *reg_vfi;
struct lpfc_hba *phba = vport->phba;
+ uint8_t bbscn_fabric = 0, bbscn_max = 0, bbscn_def = 0;
memset(mbox, 0, sizeof(*mbox));
reg_vfi = &mbox->u.mqe.un.reg_vfi;
@@ -2168,16 +2174,39 @@
bf_set(lpfc_reg_vfi_vp, reg_vfi, 0);
bf_set(lpfc_reg_vfi_upd, reg_vfi, 1);
}
+
+ bf_set(lpfc_reg_vfi_bbcr, reg_vfi, 0);
+ bf_set(lpfc_reg_vfi_bbscn, reg_vfi, 0);
+ bbscn_fabric = (phba->fc_fabparam.cmn.bbRcvSizeMsb >> 4) & 0xF;
+
+ if (phba->bbcredit_support && phba->cfg_enable_bbcr &&
+ bbscn_fabric != 0) {
+ bbscn_max = bf_get(lpfc_bbscn_max,
+ &phba->sli4_hba.bbscn_params);
+ if (bbscn_fabric <= bbscn_max) {
+ bbscn_def = bf_get(lpfc_bbscn_def,
+ &phba->sli4_hba.bbscn_params);
+
+ if (bbscn_fabric > bbscn_def)
+ bf_set(lpfc_reg_vfi_bbscn, reg_vfi,
+ bbscn_fabric);
+ else
+ bf_set(lpfc_reg_vfi_bbscn, reg_vfi, bbscn_def);
+
+ bf_set(lpfc_reg_vfi_bbcr, reg_vfi, 1);
+ }
+ }
lpfc_printf_vlog(vport, KERN_INFO, LOG_MBOX,
"3134 Register VFI, mydid:x%x, fcfi:%d, "
" vfi:%d, vpi:%d, fc_pname:%x%x fc_flag:x%x"
- " port_state:x%x topology chg:%d\n",
+ " port_state:x%x topology chg:%d bbscn_fabric :%d\n",
vport->fc_myDID,
phba->fcf.fcfi,
phba->sli4_hba.vfi_ids[vport->vfi],
phba->vpi_ids[vport->vpi],
reg_vfi->wwn[0], reg_vfi->wwn[1], vport->fc_flag,
- vport->port_state, phba->fc_topology_changed);
+ vport->port_state, phba->fc_topology_changed,
+ bbscn_fabric);
}
/**
diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c
index fcc05a1..56faeb0 100644
--- a/drivers/scsi/lpfc/lpfc_mem.c
+++ b/drivers/scsi/lpfc/lpfc_mem.c
@@ -97,8 +97,8 @@
i = SLI4_PAGE_SIZE;
phba->lpfc_sg_dma_buf_pool =
- pci_pool_create("lpfc_sg_dma_buf_pool",
- phba->pcidev,
+ dma_pool_create("lpfc_sg_dma_buf_pool",
+ &phba->pcidev->dev,
phba->cfg_sg_dma_buf_size,
i, 0);
if (!phba->lpfc_sg_dma_buf_pool)
@@ -106,15 +106,15 @@
} else {
phba->lpfc_sg_dma_buf_pool =
- pci_pool_create("lpfc_sg_dma_buf_pool",
- phba->pcidev, phba->cfg_sg_dma_buf_size,
+ dma_pool_create("lpfc_sg_dma_buf_pool",
+ &phba->pcidev->dev, phba->cfg_sg_dma_buf_size,
align, 0);
if (!phba->lpfc_sg_dma_buf_pool)
goto fail;
}
- phba->lpfc_mbuf_pool = pci_pool_create("lpfc_mbuf_pool", phba->pcidev,
+ phba->lpfc_mbuf_pool = dma_pool_create("lpfc_mbuf_pool", &phba->pcidev->dev,
LPFC_BPL_SIZE,
align, 0);
if (!phba->lpfc_mbuf_pool)
@@ -128,7 +128,7 @@
pool->max_count = 0;
pool->current_count = 0;
for ( i = 0; i < LPFC_MBUF_POOL_SIZE; i++) {
- pool->elements[i].virt = pci_pool_alloc(phba->lpfc_mbuf_pool,
+ pool->elements[i].virt = dma_pool_alloc(phba->lpfc_mbuf_pool,
GFP_KERNEL, &pool->elements[i].phys);
if (!pool->elements[i].virt)
goto fail_free_mbuf_pool;
@@ -152,21 +152,21 @@
sizeof(struct lpfc_node_rrq));
if (!phba->rrq_pool)
goto fail_free_nlp_mem_pool;
- phba->lpfc_hrb_pool = pci_pool_create("lpfc_hrb_pool",
- phba->pcidev,
+ phba->lpfc_hrb_pool = dma_pool_create("lpfc_hrb_pool",
+ &phba->pcidev->dev,
LPFC_HDR_BUF_SIZE, align, 0);
if (!phba->lpfc_hrb_pool)
goto fail_free_rrq_mem_pool;
- phba->lpfc_drb_pool = pci_pool_create("lpfc_drb_pool",
- phba->pcidev,
+ phba->lpfc_drb_pool = dma_pool_create("lpfc_drb_pool",
+ &phba->pcidev->dev,
LPFC_DATA_BUF_SIZE, align, 0);
if (!phba->lpfc_drb_pool)
goto fail_free_hrb_pool;
phba->lpfc_hbq_pool = NULL;
} else {
- phba->lpfc_hbq_pool = pci_pool_create("lpfc_hbq_pool",
- phba->pcidev, LPFC_BPL_SIZE, align, 0);
+ phba->lpfc_hbq_pool = dma_pool_create("lpfc_hbq_pool",
+ &phba->pcidev->dev, LPFC_BPL_SIZE, align, 0);
if (!phba->lpfc_hbq_pool)
goto fail_free_nlp_mem_pool;
phba->lpfc_hrb_pool = NULL;
@@ -185,10 +185,10 @@
return 0;
fail_free_drb_pool:
- pci_pool_destroy(phba->lpfc_drb_pool);
+ dma_pool_destroy(phba->lpfc_drb_pool);
phba->lpfc_drb_pool = NULL;
fail_free_hrb_pool:
- pci_pool_destroy(phba->lpfc_hrb_pool);
+ dma_pool_destroy(phba->lpfc_hrb_pool);
phba->lpfc_hrb_pool = NULL;
fail_free_rrq_mem_pool:
mempool_destroy(phba->rrq_pool);
@@ -201,14 +201,14 @@
phba->mbox_mem_pool = NULL;
fail_free_mbuf_pool:
while (i--)
- pci_pool_free(phba->lpfc_mbuf_pool, pool->elements[i].virt,
+ dma_pool_free(phba->lpfc_mbuf_pool, pool->elements[i].virt,
pool->elements[i].phys);
kfree(pool->elements);
fail_free_lpfc_mbuf_pool:
- pci_pool_destroy(phba->lpfc_mbuf_pool);
+ dma_pool_destroy(phba->lpfc_mbuf_pool);
phba->lpfc_mbuf_pool = NULL;
fail_free_dma_buf_pool:
- pci_pool_destroy(phba->lpfc_sg_dma_buf_pool);
+ dma_pool_destroy(phba->lpfc_sg_dma_buf_pool);
phba->lpfc_sg_dma_buf_pool = NULL;
fail:
return -ENOMEM;
@@ -218,8 +218,8 @@
lpfc_nvmet_mem_alloc(struct lpfc_hba *phba)
{
phba->lpfc_nvmet_drb_pool =
- pci_pool_create("lpfc_nvmet_drb_pool",
- phba->pcidev, LPFC_NVMET_DATA_BUF_SIZE,
+ dma_pool_create("lpfc_nvmet_drb_pool",
+ &phba->pcidev->dev, LPFC_NVMET_DATA_BUF_SIZE,
SGL_ALIGN_SZ, 0);
if (!phba->lpfc_nvmet_drb_pool) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
@@ -248,20 +248,20 @@
/* Free HBQ pools */
lpfc_sli_hbqbuf_free_all(phba);
if (phba->lpfc_nvmet_drb_pool)
- pci_pool_destroy(phba->lpfc_nvmet_drb_pool);
+ dma_pool_destroy(phba->lpfc_nvmet_drb_pool);
phba->lpfc_nvmet_drb_pool = NULL;
if (phba->lpfc_drb_pool)
- pci_pool_destroy(phba->lpfc_drb_pool);
+ dma_pool_destroy(phba->lpfc_drb_pool);
phba->lpfc_drb_pool = NULL;
if (phba->lpfc_hrb_pool)
- pci_pool_destroy(phba->lpfc_hrb_pool);
+ dma_pool_destroy(phba->lpfc_hrb_pool);
phba->lpfc_hrb_pool = NULL;
if (phba->txrdy_payload_pool)
- pci_pool_destroy(phba->txrdy_payload_pool);
+ dma_pool_destroy(phba->txrdy_payload_pool);
phba->txrdy_payload_pool = NULL;
if (phba->lpfc_hbq_pool)
- pci_pool_destroy(phba->lpfc_hbq_pool);
+ dma_pool_destroy(phba->lpfc_hbq_pool);
phba->lpfc_hbq_pool = NULL;
if (phba->rrq_pool)
@@ -282,15 +282,15 @@
/* Free MBUF memory pool */
for (i = 0; i < pool->current_count; i++)
- pci_pool_free(phba->lpfc_mbuf_pool, pool->elements[i].virt,
+ dma_pool_free(phba->lpfc_mbuf_pool, pool->elements[i].virt,
pool->elements[i].phys);
kfree(pool->elements);
- pci_pool_destroy(phba->lpfc_mbuf_pool);
+ dma_pool_destroy(phba->lpfc_mbuf_pool);
phba->lpfc_mbuf_pool = NULL;
/* Free DMA buffer memory pool */
- pci_pool_destroy(phba->lpfc_sg_dma_buf_pool);
+ dma_pool_destroy(phba->lpfc_sg_dma_buf_pool);
phba->lpfc_sg_dma_buf_pool = NULL;
/* Free Device Data memory pool */
@@ -379,7 +379,7 @@
* @handle: used to return the DMA-mapped address of the mbuf
*
* Description: Allocates a DMA-mapped buffer from the lpfc_mbuf_pool PCI pool.
- * Allocates from generic pci_pool_alloc function first and if that fails and
+ * Allocates from generic dma_pool_alloc function first and if that fails and
* mem_flags has MEM_PRI set (the only defined flag), returns an mbuf from the
* HBA's pool.
*
@@ -397,7 +397,7 @@
unsigned long iflags;
void *ret;
- ret = pci_pool_alloc(phba->lpfc_mbuf_pool, GFP_KERNEL, handle);
+ ret = dma_pool_alloc(phba->lpfc_mbuf_pool, GFP_KERNEL, handle);
spin_lock_irqsave(&phba->hbalock, iflags);
if (!ret && (mem_flags & MEM_PRI) && pool->current_count) {
@@ -433,7 +433,7 @@
pool->elements[pool->current_count].phys = dma;
pool->current_count++;
} else {
- pci_pool_free(phba->lpfc_mbuf_pool, virt, dma);
+ dma_pool_free(phba->lpfc_mbuf_pool, virt, dma);
}
return;
}
@@ -470,7 +470,7 @@
* @handle: used to return the DMA-mapped address of the nvmet_buf
*
* Description: Allocates a DMA-mapped buffer from the lpfc_sg_dma_buf_pool
- * PCI pool. Allocates from generic pci_pool_alloc function.
+ * PCI pool. Allocates from generic dma_pool_alloc function.
*
* Returns:
* pointer to the allocated nvmet_buf on success
@@ -481,7 +481,7 @@
{
void *ret;
- ret = pci_pool_alloc(phba->lpfc_sg_dma_buf_pool, GFP_KERNEL, handle);
+ ret = dma_pool_alloc(phba->lpfc_sg_dma_buf_pool, GFP_KERNEL, handle);
return ret;
}
@@ -497,7 +497,7 @@
void
lpfc_nvmet_buf_free(struct lpfc_hba *phba, void *virt, dma_addr_t dma)
{
- pci_pool_free(phba->lpfc_sg_dma_buf_pool, virt, dma);
+ dma_pool_free(phba->lpfc_sg_dma_buf_pool, virt, dma);
}
/**
@@ -522,7 +522,7 @@
if (!hbqbp)
return NULL;
- hbqbp->dbuf.virt = pci_pool_alloc(phba->lpfc_hbq_pool, GFP_KERNEL,
+ hbqbp->dbuf.virt = dma_pool_alloc(phba->lpfc_hbq_pool, GFP_KERNEL,
&hbqbp->dbuf.phys);
if (!hbqbp->dbuf.virt) {
kfree(hbqbp);
@@ -547,7 +547,7 @@
void
lpfc_els_hbq_free(struct lpfc_hba *phba, struct hbq_dmabuf *hbqbp)
{
- pci_pool_free(phba->lpfc_hbq_pool, hbqbp->dbuf.virt, hbqbp->dbuf.phys);
+ dma_pool_free(phba->lpfc_hbq_pool, hbqbp->dbuf.virt, hbqbp->dbuf.phys);
kfree(hbqbp);
return;
}
@@ -574,16 +574,16 @@
if (!dma_buf)
return NULL;
- dma_buf->hbuf.virt = pci_pool_alloc(phba->lpfc_hrb_pool, GFP_KERNEL,
+ dma_buf->hbuf.virt = dma_pool_alloc(phba->lpfc_hrb_pool, GFP_KERNEL,
&dma_buf->hbuf.phys);
if (!dma_buf->hbuf.virt) {
kfree(dma_buf);
return NULL;
}
- dma_buf->dbuf.virt = pci_pool_alloc(phba->lpfc_drb_pool, GFP_KERNEL,
+ dma_buf->dbuf.virt = dma_pool_alloc(phba->lpfc_drb_pool, GFP_KERNEL,
&dma_buf->dbuf.phys);
if (!dma_buf->dbuf.virt) {
- pci_pool_free(phba->lpfc_hrb_pool, dma_buf->hbuf.virt,
+ dma_pool_free(phba->lpfc_hrb_pool, dma_buf->hbuf.virt,
dma_buf->hbuf.phys);
kfree(dma_buf);
return NULL;
@@ -607,8 +607,8 @@
void
lpfc_sli4_rb_free(struct lpfc_hba *phba, struct hbq_dmabuf *dmab)
{
- pci_pool_free(phba->lpfc_hrb_pool, dmab->hbuf.virt, dmab->hbuf.phys);
- pci_pool_free(phba->lpfc_drb_pool, dmab->dbuf.virt, dmab->dbuf.phys);
+ dma_pool_free(phba->lpfc_hrb_pool, dmab->hbuf.virt, dmab->hbuf.phys);
+ dma_pool_free(phba->lpfc_drb_pool, dmab->dbuf.virt, dmab->dbuf.phys);
kfree(dmab);
}
@@ -634,16 +634,16 @@
if (!dma_buf)
return NULL;
- dma_buf->hbuf.virt = pci_pool_alloc(phba->lpfc_hrb_pool, GFP_KERNEL,
+ dma_buf->hbuf.virt = dma_pool_alloc(phba->lpfc_hrb_pool, GFP_KERNEL,
&dma_buf->hbuf.phys);
if (!dma_buf->hbuf.virt) {
kfree(dma_buf);
return NULL;
}
- dma_buf->dbuf.virt = pci_pool_alloc(phba->lpfc_nvmet_drb_pool,
+ dma_buf->dbuf.virt = dma_pool_alloc(phba->lpfc_nvmet_drb_pool,
GFP_KERNEL, &dma_buf->dbuf.phys);
if (!dma_buf->dbuf.virt) {
- pci_pool_free(phba->lpfc_hrb_pool, dma_buf->hbuf.virt,
+ dma_pool_free(phba->lpfc_hrb_pool, dma_buf->hbuf.virt,
dma_buf->hbuf.phys);
kfree(dma_buf);
return NULL;
@@ -667,8 +667,8 @@
void
lpfc_sli4_nvmet_free(struct lpfc_hba *phba, struct rqb_dmabuf *dmab)
{
- pci_pool_free(phba->lpfc_hrb_pool, dmab->hbuf.virt, dmab->hbuf.phys);
- pci_pool_free(phba->lpfc_nvmet_drb_pool,
+ dma_pool_free(phba->lpfc_hrb_pool, dmab->hbuf.virt, dmab->hbuf.phys);
+ dma_pool_free(phba->lpfc_nvmet_drb_pool,
dmab->dbuf.virt, dmab->dbuf.phys);
kfree(dmab);
}
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index f74cb01..f3ad7ca 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -1724,6 +1724,9 @@
lpfc_nvme_update_localport(vport);
}
+ } else if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
+ ndlp->nlp_fc4_type |= NLP_FC4_FCP;
+
} else if (ndlp->nlp_fc4_type == 0) {
rc = lpfc_ns_cmd(vport, SLI_CTNS_GFT_ID,
0, ndlp->nlp_DID);
@@ -1892,6 +1895,15 @@
goto out;
}
+ /* When the rport rejected the FCP PRLI as unsupported.
+ * This should only happen in Pt2Pt so an NVME PRLI
+ * should be outstanding still.
+ */
+ if (npr && ndlp->nlp_flag & NLP_FCP_PRLI_RJT) {
+ ndlp->nlp_fc4_type &= ~NLP_FC4_FCP;
+ goto out_err;
+ }
+
/* The LS Req had some error. Don't let this be a
* target.
*/
@@ -2189,12 +2201,15 @@
void *arg, uint32_t evt)
{
/*
- * Take no action. If a LOGO is outstanding, then possibly DevLoss has
- * timed out and is calling for Device Remove. In this case, the LOGO
- * must be allowed to complete in state LOGO_ISSUE so that the rpi
- * and other NLP flags are correctly cleaned up.
+ * DevLoss has timed out and is calling for Device Remove.
+ * In this case, abort the LOGO and cleanup the ndlp
*/
- return ndlp->nlp_state;
+
+ lpfc_unreg_rpi(vport, ndlp);
+ /* software abort outstanding PLOGI */
+ lpfc_els_abort(vport->phba, ndlp);
+ lpfc_drop_node(vport, ndlp);
+ return NLP_STE_FREED_NODE;
}
static uint32_t
diff --git a/drivers/scsi/lpfc/lpfc_nvme.c b/drivers/scsi/lpfc/lpfc_nvme.c
index 0a0a1b9..79ba3ce 100644
--- a/drivers/scsi/lpfc/lpfc_nvme.c
+++ b/drivers/scsi/lpfc/lpfc_nvme.c
@@ -110,7 +110,7 @@
qhandle->index = qidx;
}
- lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME,
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME,
"6073 Binding %s HdwQueue %d (cpu %d) to "
"io_channel %d qhandle %p\n", str,
qidx, qhandle->cpu_id, qhandle->index, qhandle);
@@ -364,7 +364,7 @@
genwqe->sli4_xritag, genwqe->iotag, ndlp->nlp_DID);
rc = lpfc_sli4_issue_wqe(phba, LPFC_ELS_RING, genwqe);
- if (rc == WQE_ERROR) {
+ if (rc) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
"6045 Issue GEN REQ WQE to NPORT x%x "
"Data: x%x x%x\n",
@@ -1270,7 +1270,7 @@
* not exceed the programmed depth.
*/
if (atomic_read(&ndlp->cmd_pending) >= ndlp->cmd_qdepth) {
- ret = -EAGAIN;
+ ret = -EBUSY;
goto out_fail;
}
@@ -1279,7 +1279,7 @@
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_IOERR,
"6065 driver's buffer pool is empty, "
"IO failed\n");
- ret = -ENOMEM;
+ ret = -EBUSY;
goto out_fail;
}
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
@@ -1332,7 +1332,6 @@
"sid: x%x did: x%x oxid: x%x\n",
ret, vport->fc_myDID, ndlp->nlp_DID,
lpfc_ncmd->cur_iocbq.sli4_xritag);
- ret = -EBUSY;
goto out_free_nvme_buf;
}
@@ -1576,7 +1575,7 @@
abts_buf->wqe_cmpl = lpfc_nvme_abort_fcreq_cmpl;
ret_val = lpfc_sli4_issue_wqe(phba, LPFC_FCP_RING, abts_buf);
spin_unlock_irqrestore(&phba->hbalock, flags);
- if (ret_val == IOCB_ERROR) {
+ if (ret_val) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS,
"6137 Failed abts issue_wqe with status x%x "
"for nvme_fcreq %p.\n",
@@ -1939,7 +1938,7 @@
* pci bus space for an I/O. The DMA buffer includes the
* number of SGE's necessary to support the sg_tablesize.
*/
- lpfc_ncmd->data = pci_pool_alloc(phba->lpfc_sg_dma_buf_pool,
+ lpfc_ncmd->data = dma_pool_alloc(phba->lpfc_sg_dma_buf_pool,
GFP_KERNEL,
&lpfc_ncmd->dma_handle);
if (!lpfc_ncmd->data) {
@@ -1950,7 +1949,7 @@
lxri = lpfc_sli4_next_xritag(phba);
if (lxri == NO_XRI) {
- pci_pool_free(phba->lpfc_sg_dma_buf_pool,
+ dma_pool_free(phba->lpfc_sg_dma_buf_pool,
lpfc_ncmd->data, lpfc_ncmd->dma_handle);
kfree(lpfc_ncmd);
break;
@@ -1961,7 +1960,7 @@
/* Allocate iotag for lpfc_ncmd->cur_iocbq. */
iotag = lpfc_sli_next_iotag(phba, pwqeq);
if (iotag == 0) {
- pci_pool_free(phba->lpfc_sg_dma_buf_pool,
+ dma_pool_free(phba->lpfc_sg_dma_buf_pool,
lpfc_ncmd->data, lpfc_ncmd->dma_handle);
kfree(lpfc_ncmd);
lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR,
@@ -2182,8 +2181,15 @@
vport->localport = localport;
lport->vport = vport;
vport->nvmei_support = 1;
- len = lpfc_new_nvme_buf(vport, phba->sli4_hba.nvme_xri_max);
- vport->phba->total_nvme_bufs += len;
+
+ /* Don't post more new bufs if repost already recovered
+ * the nvme sgls.
+ */
+ if (phba->sli4_hba.nvme_xri_cnt == 0) {
+ len = lpfc_new_nvme_buf(vport,
+ phba->sli4_hba.nvme_xri_max);
+ vport->phba->total_nvme_bufs += len;
+ }
}
return ret;
@@ -2296,6 +2302,9 @@
ndlp->nlp_DID, ndlp->nlp_type);
localport = vport->localport;
+ if (!localport)
+ return 0;
+
lport = (struct lpfc_nvme_lport *)localport->private;
/* NVME rports are not preserved across devloss.
diff --git a/drivers/scsi/lpfc/lpfc_nvmet.c b/drivers/scsi/lpfc/lpfc_nvmet.c
index fbeec34..346af47 100644
--- a/drivers/scsi/lpfc/lpfc_nvmet.c
+++ b/drivers/scsi/lpfc/lpfc_nvmet.c
@@ -170,12 +170,14 @@
struct lpfc_nvmet_tgtport *tgtp;
struct fc_frame_header *fc_hdr;
struct rqb_dmabuf *nvmebuf;
+ struct lpfc_nvmet_ctx_info *infop;
uint32_t *payload;
uint32_t size, oxid, sid, rc;
+ int cpu;
unsigned long iflag;
if (ctxp->txrdy) {
- pci_pool_free(phba->txrdy_payload_pool, ctxp->txrdy,
+ dma_pool_free(phba->txrdy_payload_pool, ctxp->txrdy,
ctxp->txrdy_phys);
ctxp->txrdy = NULL;
ctxp->txrdy_phys = 0;
@@ -267,11 +269,16 @@
}
spin_unlock_irqrestore(&phba->sli4_hba.nvmet_io_wait_lock, iflag);
- spin_lock_irqsave(&phba->sli4_hba.nvmet_ctx_put_lock, iflag);
- list_add_tail(&ctx_buf->list,
- &phba->sli4_hba.lpfc_nvmet_ctx_put_list);
- phba->sli4_hba.nvmet_ctx_put_cnt++;
- spin_unlock_irqrestore(&phba->sli4_hba.nvmet_ctx_put_lock, iflag);
+ /*
+ * Use the CPU context list, from the MRQ the IO was received on
+ * (ctxp->idx), to save context structure.
+ */
+ cpu = smp_processor_id();
+ infop = lpfc_get_ctx_list(phba, cpu, ctxp->idx);
+ spin_lock_irqsave(&infop->nvmet_ctx_list_lock, iflag);
+ list_add_tail(&ctx_buf->list, &infop->nvmet_ctx_list);
+ infop->nvmet_ctx_list_cnt++;
+ spin_unlock_irqrestore(&infop->nvmet_ctx_list_lock, iflag);
#endif
}
@@ -552,7 +559,7 @@
/* lpfc_nvmet_xmt_fcp_release() will recycle the context */
} else {
ctxp->entry_cnt++;
- start_clean = offsetof(struct lpfc_iocbq, wqe);
+ start_clean = offsetof(struct lpfc_iocbq, iocb_flag);
memset(((char *)cmdwqe) + start_clean, 0,
(sizeof(struct lpfc_iocbq) - start_clean));
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
@@ -860,51 +867,54 @@
};
static void
-lpfc_nvmet_cleanup_io_context(struct lpfc_hba *phba)
+__lpfc_nvmet_clean_io_for_cpu(struct lpfc_hba *phba,
+ struct lpfc_nvmet_ctx_info *infop)
{
struct lpfc_nvmet_ctxbuf *ctx_buf, *next_ctx_buf;
unsigned long flags;
- spin_lock_irqsave(&phba->sli4_hba.nvmet_ctx_get_lock, flags);
- spin_lock(&phba->sli4_hba.nvmet_ctx_put_lock);
+ spin_lock_irqsave(&infop->nvmet_ctx_list_lock, flags);
list_for_each_entry_safe(ctx_buf, next_ctx_buf,
- &phba->sli4_hba.lpfc_nvmet_ctx_get_list, list) {
+ &infop->nvmet_ctx_list, list) {
spin_lock(&phba->sli4_hba.abts_nvme_buf_list_lock);
list_del_init(&ctx_buf->list);
spin_unlock(&phba->sli4_hba.abts_nvme_buf_list_lock);
- __lpfc_clear_active_sglq(phba,
- ctx_buf->sglq->sli4_lxritag);
+
+ __lpfc_clear_active_sglq(phba, ctx_buf->sglq->sli4_lxritag);
ctx_buf->sglq->state = SGL_FREED;
ctx_buf->sglq->ndlp = NULL;
spin_lock(&phba->sli4_hba.sgl_list_lock);
list_add_tail(&ctx_buf->sglq->list,
- &phba->sli4_hba.lpfc_nvmet_sgl_list);
+ &phba->sli4_hba.lpfc_nvmet_sgl_list);
spin_unlock(&phba->sli4_hba.sgl_list_lock);
lpfc_sli_release_iocbq(phba, ctx_buf->iocbq);
kfree(ctx_buf->context);
}
- list_for_each_entry_safe(ctx_buf, next_ctx_buf,
- &phba->sli4_hba.lpfc_nvmet_ctx_put_list, list) {
- spin_lock(&phba->sli4_hba.abts_nvme_buf_list_lock);
- list_del_init(&ctx_buf->list);
- spin_unlock(&phba->sli4_hba.abts_nvme_buf_list_lock);
- __lpfc_clear_active_sglq(phba,
- ctx_buf->sglq->sli4_lxritag);
- ctx_buf->sglq->state = SGL_FREED;
- ctx_buf->sglq->ndlp = NULL;
+ spin_unlock_irqrestore(&infop->nvmet_ctx_list_lock, flags);
+}
- spin_lock(&phba->sli4_hba.sgl_list_lock);
- list_add_tail(&ctx_buf->sglq->list,
- &phba->sli4_hba.lpfc_nvmet_sgl_list);
- spin_unlock(&phba->sli4_hba.sgl_list_lock);
+static void
+lpfc_nvmet_cleanup_io_context(struct lpfc_hba *phba)
+{
+ struct lpfc_nvmet_ctx_info *infop;
+ int i, j;
- lpfc_sli_release_iocbq(phba, ctx_buf->iocbq);
- kfree(ctx_buf->context);
+ /* The first context list, MRQ 0 CPU 0 */
+ infop = phba->sli4_hba.nvmet_ctx_info;
+ if (!infop)
+ return;
+
+ /* Cycle the the entire CPU context list for every MRQ */
+ for (i = 0; i < phba->cfg_nvmet_mrq; i++) {
+ for (j = 0; j < phba->sli4_hba.num_present_cpu; j++) {
+ __lpfc_nvmet_clean_io_for_cpu(phba, infop);
+ infop++; /* next */
+ }
}
- spin_unlock(&phba->sli4_hba.nvmet_ctx_put_lock);
- spin_unlock_irqrestore(&phba->sli4_hba.nvmet_ctx_get_lock, flags);
+ kfree(phba->sli4_hba.nvmet_ctx_info);
+ phba->sli4_hba.nvmet_ctx_info = NULL;
}
static int
@@ -913,15 +923,71 @@
struct lpfc_nvmet_ctxbuf *ctx_buf;
struct lpfc_iocbq *nvmewqe;
union lpfc_wqe128 *wqe;
- int i;
+ struct lpfc_nvmet_ctx_info *last_infop;
+ struct lpfc_nvmet_ctx_info *infop;
+ int i, j, idx;
lpfc_printf_log(phba, KERN_INFO, LOG_NVME,
"6403 Allocate NVMET resources for %d XRIs\n",
phba->sli4_hba.nvmet_xri_cnt);
+ phba->sli4_hba.nvmet_ctx_info = kcalloc(
+ phba->sli4_hba.num_present_cpu * phba->cfg_nvmet_mrq,
+ sizeof(struct lpfc_nvmet_ctx_info), GFP_KERNEL);
+ if (!phba->sli4_hba.nvmet_ctx_info) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "6419 Failed allocate memory for "
+ "nvmet context lists\n");
+ return -ENOMEM;
+ }
+
+ /*
+ * Assuming X CPUs in the system, and Y MRQs, allocate some
+ * lpfc_nvmet_ctx_info structures as follows:
+ *
+ * cpu0/mrq0 cpu1/mrq0 ... cpuX/mrq0
+ * cpu0/mrq1 cpu1/mrq1 ... cpuX/mrq1
+ * ...
+ * cpuX/mrqY cpuX/mrqY ... cpuX/mrqY
+ *
+ * Each line represents a MRQ "silo" containing an entry for
+ * every CPU.
+ *
+ * MRQ X is initially assumed to be associated with CPU X, thus
+ * contexts are initially distributed across all MRQs using
+ * the MRQ index (N) as follows cpuN/mrqN. When contexts are
+ * freed, the are freed to the MRQ silo based on the CPU number
+ * of the IO completion. Thus a context that was allocated for MRQ A
+ * whose IO completed on CPU B will be freed to cpuB/mrqA.
+ */
+ infop = phba->sli4_hba.nvmet_ctx_info;
+ for (i = 0; i < phba->sli4_hba.num_present_cpu; i++) {
+ for (j = 0; j < phba->cfg_nvmet_mrq; j++) {
+ INIT_LIST_HEAD(&infop->nvmet_ctx_list);
+ spin_lock_init(&infop->nvmet_ctx_list_lock);
+ infop->nvmet_ctx_list_cnt = 0;
+ infop++;
+ }
+ }
+
+ /*
+ * Setup the next CPU context info ptr for each MRQ.
+ * MRQ 0 will cycle thru CPUs 0 - X separately from
+ * MRQ 1 cycling thru CPUs 0 - X, and so on.
+ */
+ for (j = 0; j < phba->cfg_nvmet_mrq; j++) {
+ last_infop = lpfc_get_ctx_list(phba, 0, j);
+ for (i = phba->sli4_hba.num_present_cpu - 1; i >= 0; i--) {
+ infop = lpfc_get_ctx_list(phba, i, j);
+ infop->nvmet_ctx_next_cpu = last_infop;
+ last_infop = infop;
+ }
+ }
+
/* For all nvmet xris, allocate resources needed to process a
* received command on a per xri basis.
*/
+ idx = 0;
for (i = 0; i < phba->sli4_hba.nvmet_xri_cnt; i++) {
ctx_buf = kzalloc(sizeof(*ctx_buf), GFP_KERNEL);
if (!ctx_buf) {
@@ -958,7 +1024,6 @@
/* Word 7 */
bf_set(wqe_ct, &wqe->generic.wqe_com, SLI4_CT_RPI);
bf_set(wqe_class, &wqe->generic.wqe_com, CLASS3);
- bf_set(wqe_pu, &wqe->generic.wqe_com, 1);
/* Word 10 */
bf_set(wqe_nvme, &wqe->fcp_tsend.wqe_com, 1);
bf_set(wqe_ebde_cnt, &wqe->generic.wqe_com, 0);
@@ -976,12 +1041,35 @@
"6407 Ran out of NVMET XRIs\n");
return -ENOMEM;
}
- spin_lock(&phba->sli4_hba.nvmet_ctx_get_lock);
- list_add_tail(&ctx_buf->list,
- &phba->sli4_hba.lpfc_nvmet_ctx_get_list);
- spin_unlock(&phba->sli4_hba.nvmet_ctx_get_lock);
+
+ /*
+ * Add ctx to MRQidx context list. Our initial assumption
+ * is MRQidx will be associated with CPUidx. This association
+ * can change on the fly.
+ */
+ infop = lpfc_get_ctx_list(phba, idx, idx);
+ spin_lock(&infop->nvmet_ctx_list_lock);
+ list_add_tail(&ctx_buf->list, &infop->nvmet_ctx_list);
+ infop->nvmet_ctx_list_cnt++;
+ spin_unlock(&infop->nvmet_ctx_list_lock);
+
+ /* Spread ctx structures evenly across all MRQs */
+ idx++;
+ if (idx >= phba->cfg_nvmet_mrq)
+ idx = 0;
}
- phba->sli4_hba.nvmet_ctx_get_cnt = phba->sli4_hba.nvmet_xri_cnt;
+
+ infop = phba->sli4_hba.nvmet_ctx_info;
+ for (j = 0; j < phba->cfg_nvmet_mrq; j++) {
+ for (i = 0; i < phba->sli4_hba.num_present_cpu; i++) {
+ lpfc_printf_log(phba, KERN_INFO, LOG_NVME | LOG_INIT,
+ "6408 TOTAL NVMET ctx for CPU %d "
+ "MRQ %d: cnt %d nextcpu %p\n",
+ i, j, infop->nvmet_ctx_list_cnt,
+ infop->nvmet_ctx_next_cpu);
+ infop++;
+ }
+ }
return 0;
}
@@ -1346,10 +1434,65 @@
#endif
}
+static struct lpfc_nvmet_ctxbuf *
+lpfc_nvmet_replenish_context(struct lpfc_hba *phba,
+ struct lpfc_nvmet_ctx_info *current_infop)
+{
+ struct lpfc_nvmet_ctxbuf *ctx_buf = NULL;
+ struct lpfc_nvmet_ctx_info *get_infop;
+ int i;
+
+ /*
+ * The current_infop for the MRQ a NVME command IU was received
+ * on is empty. Our goal is to replenish this MRQs context
+ * list from a another CPUs.
+ *
+ * First we need to pick a context list to start looking on.
+ * nvmet_ctx_start_cpu has available context the last time
+ * we needed to replenish this CPU where nvmet_ctx_next_cpu
+ * is just the next sequential CPU for this MRQ.
+ */
+ if (current_infop->nvmet_ctx_start_cpu)
+ get_infop = current_infop->nvmet_ctx_start_cpu;
+ else
+ get_infop = current_infop->nvmet_ctx_next_cpu;
+
+ for (i = 0; i < phba->sli4_hba.num_present_cpu; i++) {
+ if (get_infop == current_infop) {
+ get_infop = get_infop->nvmet_ctx_next_cpu;
+ continue;
+ }
+ spin_lock(&get_infop->nvmet_ctx_list_lock);
+
+ /* Just take the entire context list, if there are any */
+ if (get_infop->nvmet_ctx_list_cnt) {
+ list_splice_init(&get_infop->nvmet_ctx_list,
+ ¤t_infop->nvmet_ctx_list);
+ current_infop->nvmet_ctx_list_cnt =
+ get_infop->nvmet_ctx_list_cnt - 1;
+ get_infop->nvmet_ctx_list_cnt = 0;
+ spin_unlock(&get_infop->nvmet_ctx_list_lock);
+
+ current_infop->nvmet_ctx_start_cpu = get_infop;
+ list_remove_head(¤t_infop->nvmet_ctx_list,
+ ctx_buf, struct lpfc_nvmet_ctxbuf,
+ list);
+ return ctx_buf;
+ }
+
+ /* Otherwise, move on to the next CPU for this MRQ */
+ spin_unlock(&get_infop->nvmet_ctx_list_lock);
+ get_infop = get_infop->nvmet_ctx_next_cpu;
+ }
+
+ /* Nothing found, all contexts for the MRQ are in-flight */
+ return NULL;
+}
+
/**
* lpfc_nvmet_unsol_fcp_buffer - Process an unsolicited event data buffer
* @phba: pointer to lpfc hba data structure.
- * @pring: pointer to a SLI ring.
+ * @idx: relative index of MRQ vector
* @nvmebuf: pointer to lpfc nvme command HBQ data structure.
*
* This routine is used for processing the WQE associated with a unsolicited
@@ -1361,22 +1504,26 @@
**/
static void
lpfc_nvmet_unsol_fcp_buffer(struct lpfc_hba *phba,
- struct lpfc_sli_ring *pring,
+ uint32_t idx,
struct rqb_dmabuf *nvmebuf,
uint64_t isr_timestamp)
{
-#if (IS_ENABLED(CONFIG_NVME_TARGET_FC))
struct lpfc_nvmet_rcv_ctx *ctxp;
struct lpfc_nvmet_tgtport *tgtp;
struct fc_frame_header *fc_hdr;
struct lpfc_nvmet_ctxbuf *ctx_buf;
+ struct lpfc_nvmet_ctx_info *current_infop;
uint32_t *payload;
uint32_t size, oxid, sid, rc, qno;
unsigned long iflag;
+ int current_cpu;
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
uint32_t id;
#endif
+ if (!IS_ENABLED(CONFIG_NVME_TARGET_FC))
+ return;
+
ctx_buf = NULL;
if (!nvmebuf || !phba->targetport) {
lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR,
@@ -1388,31 +1535,24 @@
goto dropit;
}
- spin_lock_irqsave(&phba->sli4_hba.nvmet_ctx_get_lock, iflag);
- if (phba->sli4_hba.nvmet_ctx_get_cnt) {
- list_remove_head(&phba->sli4_hba.lpfc_nvmet_ctx_get_list,
+ /*
+ * Get a pointer to the context list for this MRQ based on
+ * the CPU this MRQ IRQ is associated with. If the CPU association
+ * changes from our initial assumption, the context list could
+ * be empty, thus it would need to be replenished with the
+ * context list from another CPU for this MRQ.
+ */
+ current_cpu = smp_processor_id();
+ current_infop = lpfc_get_ctx_list(phba, current_cpu, idx);
+ spin_lock_irqsave(¤t_infop->nvmet_ctx_list_lock, iflag);
+ if (current_infop->nvmet_ctx_list_cnt) {
+ list_remove_head(¤t_infop->nvmet_ctx_list,
ctx_buf, struct lpfc_nvmet_ctxbuf, list);
- phba->sli4_hba.nvmet_ctx_get_cnt--;
+ current_infop->nvmet_ctx_list_cnt--;
} else {
- spin_lock(&phba->sli4_hba.nvmet_ctx_put_lock);
- if (phba->sli4_hba.nvmet_ctx_put_cnt) {
- list_splice(&phba->sli4_hba.lpfc_nvmet_ctx_put_list,
- &phba->sli4_hba.lpfc_nvmet_ctx_get_list);
- INIT_LIST_HEAD(&phba->sli4_hba.lpfc_nvmet_ctx_put_list);
- phba->sli4_hba.nvmet_ctx_get_cnt =
- phba->sli4_hba.nvmet_ctx_put_cnt;
- phba->sli4_hba.nvmet_ctx_put_cnt = 0;
- spin_unlock(&phba->sli4_hba.nvmet_ctx_put_lock);
-
- list_remove_head(
- &phba->sli4_hba.lpfc_nvmet_ctx_get_list,
- ctx_buf, struct lpfc_nvmet_ctxbuf, list);
- phba->sli4_hba.nvmet_ctx_get_cnt--;
- } else {
- spin_unlock(&phba->sli4_hba.nvmet_ctx_put_lock);
- }
+ ctx_buf = lpfc_nvmet_replenish_context(phba, current_infop);
}
- spin_unlock_irqrestore(&phba->sli4_hba.nvmet_ctx_get_lock, iflag);
+ spin_unlock_irqrestore(¤t_infop->nvmet_ctx_list_lock, iflag);
fc_hdr = (struct fc_frame_header *)(nvmebuf->hbuf.virt);
oxid = be16_to_cpu(fc_hdr->fh_ox_id);
@@ -1464,6 +1604,7 @@
ctxp->size = size;
ctxp->oxid = oxid;
ctxp->sid = sid;
+ ctxp->idx = idx;
ctxp->state = LPFC_NVMET_STE_RCV;
ctxp->entry_cnt = 1;
ctxp->flag = 0;
@@ -1526,7 +1667,6 @@
if (nvmebuf)
lpfc_rq_buf_free(phba, &nvmebuf->hbuf); /* repost */
-#endif
}
/**
@@ -1561,7 +1701,7 @@
/**
* lpfc_nvmet_unsol_fcp_event - Process an unsolicited event from an nvme nport
* @phba: pointer to lpfc hba data structure.
- * @pring: pointer to a SLI ring.
+ * @idx: relative index of MRQ vector
* @nvmebuf: pointer to received nvme data structure.
*
* This routine is used to process an unsolicited event received from a SLI
@@ -1572,7 +1712,7 @@
**/
void
lpfc_nvmet_unsol_fcp_event(struct lpfc_hba *phba,
- struct lpfc_sli_ring *pring,
+ uint32_t idx,
struct rqb_dmabuf *nvmebuf,
uint64_t isr_timestamp)
{
@@ -1580,7 +1720,7 @@
lpfc_rq_buf_free(phba, &nvmebuf->hbuf);
return;
}
- lpfc_nvmet_unsol_fcp_buffer(phba, pring, nvmebuf,
+ lpfc_nvmet_unsol_fcp_buffer(phba, idx, nvmebuf,
isr_timestamp);
}
@@ -1833,6 +1973,7 @@
nvmewqe->sli4_xritag);
/* Word 7 */
+ bf_set(wqe_pu, &wqe->fcp_tsend.wqe_com, 1);
bf_set(wqe_cmnd, &wqe->fcp_tsend.wqe_com, CMD_FCP_TSEND64_WQE);
/* Word 8 */
@@ -1909,7 +2050,7 @@
case NVMET_FCOP_WRITEDATA:
/* Words 0 - 2 : The first sg segment */
- txrdy = pci_pool_alloc(phba->txrdy_payload_pool,
+ txrdy = dma_pool_alloc(phba->txrdy_payload_pool,
GFP_KERNEL, &physaddr);
if (!txrdy) {
lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR,
@@ -1941,6 +2082,7 @@
nvmewqe->sli4_xritag);
/* Word 7 */
+ bf_set(wqe_pu, &wqe->fcp_treceive.wqe_com, 1);
bf_set(wqe_ar, &wqe->fcp_treceive.wqe_com, 0);
bf_set(wqe_cmnd, &wqe->fcp_treceive.wqe_com,
CMD_FCP_TRECEIVE64_WQE);
@@ -2024,6 +2166,7 @@
nvmewqe->sli4_xritag);
/* Word 7 */
+ bf_set(wqe_pu, &wqe->fcp_trsp.wqe_com, 0);
bf_set(wqe_ag, &wqe->fcp_trsp.wqe_com, 1);
bf_set(wqe_cmnd, &wqe->fcp_trsp.wqe_com, CMD_FCP_TRSP64_WQE);
diff --git a/drivers/scsi/lpfc/lpfc_nvmet.h b/drivers/scsi/lpfc/lpfc_nvmet.h
index e675ef1..88cd62a 100644
--- a/drivers/scsi/lpfc/lpfc_nvmet.h
+++ b/drivers/scsi/lpfc/lpfc_nvmet.h
@@ -73,6 +73,19 @@
atomic_t xmt_abort_rsp_error;
};
+struct lpfc_nvmet_ctx_info {
+ struct list_head nvmet_ctx_list;
+ spinlock_t nvmet_ctx_list_lock; /* lock per CPU */
+ struct lpfc_nvmet_ctx_info *nvmet_ctx_next_cpu;
+ struct lpfc_nvmet_ctx_info *nvmet_ctx_start_cpu;
+ uint16_t nvmet_ctx_list_cnt;
+ char pad[16]; /* pad to a cache-line */
+};
+
+/* This retrieves the context info associated with the specified cpu / mrq */
+#define lpfc_get_ctx_list(phba, cpu, mrq) \
+ (phba->sli4_hba.nvmet_ctx_info + ((cpu * phba->cfg_nvmet_mrq) + mrq))
+
struct lpfc_nvmet_rcv_ctx {
union {
struct nvmefc_tgt_ls_req ls_req;
@@ -91,6 +104,7 @@
uint16_t size;
uint16_t entry_cnt;
uint16_t cpu;
+ uint16_t idx;
uint16_t state;
/* States */
#define LPFC_NVMET_STE_LS_RCV 1
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index adc7845..1a6f122 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -416,7 +416,7 @@
* struct fcp_cmnd, struct fcp_rsp and the number of bde's
* necessary to support the sg_tablesize.
*/
- psb->data = pci_pool_zalloc(phba->lpfc_sg_dma_buf_pool,
+ psb->data = dma_pool_zalloc(phba->lpfc_sg_dma_buf_pool,
GFP_KERNEL, &psb->dma_handle);
if (!psb->data) {
kfree(psb);
@@ -427,7 +427,7 @@
/* Allocate iotag for psb->cur_iocbq. */
iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq);
if (iotag == 0) {
- pci_pool_free(phba->lpfc_sg_dma_buf_pool,
+ dma_pool_free(phba->lpfc_sg_dma_buf_pool,
psb->data, psb->dma_handle);
kfree(psb);
break;
@@ -826,7 +826,7 @@
* for the struct fcp_cmnd, struct fcp_rsp and the number
* of bde's necessary to support the sg_tablesize.
*/
- psb->data = pci_pool_zalloc(phba->lpfc_sg_dma_buf_pool,
+ psb->data = dma_pool_zalloc(phba->lpfc_sg_dma_buf_pool,
GFP_KERNEL, &psb->dma_handle);
if (!psb->data) {
kfree(psb);
@@ -839,7 +839,7 @@
*/
if (phba->cfg_enable_bg && (((unsigned long)(psb->data) &
(unsigned long)(SLI4_PAGE_SIZE - 1)) != 0)) {
- pci_pool_free(phba->lpfc_sg_dma_buf_pool,
+ dma_pool_free(phba->lpfc_sg_dma_buf_pool,
psb->data, psb->dma_handle);
kfree(psb);
break;
@@ -848,7 +848,7 @@
lxri = lpfc_sli4_next_xritag(phba);
if (lxri == NO_XRI) {
- pci_pool_free(phba->lpfc_sg_dma_buf_pool,
+ dma_pool_free(phba->lpfc_sg_dma_buf_pool,
psb->data, psb->dma_handle);
kfree(psb);
break;
@@ -857,7 +857,7 @@
/* Allocate iotag for psb->cur_iocbq. */
iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq);
if (iotag == 0) {
- pci_pool_free(phba->lpfc_sg_dma_buf_pool,
+ dma_pool_free(phba->lpfc_sg_dma_buf_pool,
psb->data, psb->dma_handle);
kfree(psb);
lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index e948ea0..8b119f8 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -80,8 +80,8 @@
struct lpfc_cqe *);
static int lpfc_sli4_post_sgl_list(struct lpfc_hba *, struct list_head *,
int);
-static void lpfc_sli4_hba_handle_eqe(struct lpfc_hba *, struct lpfc_eqe *,
- uint32_t);
+static int lpfc_sli4_hba_handle_eqe(struct lpfc_hba *phba,
+ struct lpfc_eqe *eqe, uint32_t qidx);
static bool lpfc_sli4_mbox_completions_pending(struct lpfc_hba *phba);
static bool lpfc_sli4_process_missed_mbox_completions(struct lpfc_hba *phba);
static int lpfc_sli4_abort_nvme_io(struct lpfc_hba *phba,
@@ -106,7 +106,7 @@
* -ENOMEM.
* The caller is expected to hold the hbalock when calling this routine.
**/
-static uint32_t
+static int
lpfc_sli4_wq_put(struct lpfc_queue *q, union lpfc_wqe *wqe)
{
union lpfc_wqe *temp_wqe;
@@ -123,7 +123,7 @@
idx = ((q->host_index + 1) % q->entry_count);
if (idx == q->hba_index) {
q->WQ_overflow++;
- return -ENOMEM;
+ return -EBUSY;
}
q->WQ_posted++;
/* set consumption flag every once in a while */
@@ -10741,7 +10741,7 @@
abtsiocbp->vport = vport;
abtsiocbp->wqe_cmpl = lpfc_nvme_abort_fcreq_cmpl;
retval = lpfc_sli4_issue_wqe(phba, LPFC_FCP_RING, abtsiocbp);
- if (retval == IOCB_ERROR) {
+ if (retval) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME,
"6147 Failed abts issue_wqe with status x%x "
"for oxid x%x\n",
@@ -13010,7 +13010,7 @@
* completion queue, and then return.
*
**/
-static void
+static int
lpfc_sli4_sp_handle_eqe(struct lpfc_hba *phba, struct lpfc_eqe *eqe,
struct lpfc_queue *speq)
{
@@ -13034,7 +13034,7 @@
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"0365 Slow-path CQ identifier "
"(%d) does not exist\n", cqid);
- return;
+ return 0;
}
/* Save EQ associated with this CQ */
@@ -13071,7 +13071,7 @@
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"0370 Invalid completion queue type (%d)\n",
cq->type);
- return;
+ return 0;
}
/* Catch the no cq entry condition, log an error */
@@ -13086,6 +13086,8 @@
/* wake up worker thread if there are works to be done */
if (workposted)
lpfc_worker_wake_up(phba);
+
+ return ecount;
}
/**
@@ -13289,7 +13291,7 @@
if (fc_hdr->fh_type == FC_TYPE_FCP) {
dma_buf->bytes_recv = bf_get(lpfc_rcqe_length, rcqe);
lpfc_nvmet_unsol_fcp_event(
- phba, phba->sli4_hba.els_wq->pring, dma_buf,
+ phba, idx, dma_buf,
cq->assoc_qp->isr_timestamp);
return false;
}
@@ -13393,7 +13395,7 @@
* queue and process all the entries on the completion queue, rearm the
* completion queue, and then return.
**/
-static void
+static int
lpfc_sli4_hba_handle_eqe(struct lpfc_hba *phba, struct lpfc_eqe *eqe,
uint32_t qidx)
{
@@ -13409,7 +13411,7 @@
"event: majorcode=x%x, minorcode=x%x\n",
bf_get_le32(lpfc_eqe_major_code, eqe),
bf_get_le32(lpfc_eqe_minor_code, eqe));
- return;
+ return 0;
}
/* Get the reference to the corresponding CQ */
@@ -13446,8 +13448,9 @@
/* Otherwise this is a Slow path event */
if (cq == NULL) {
- lpfc_sli4_sp_handle_eqe(phba, eqe, phba->sli4_hba.hba_eq[qidx]);
- return;
+ ecount = lpfc_sli4_sp_handle_eqe(phba, eqe,
+ phba->sli4_hba.hba_eq[qidx]);
+ return ecount;
}
process_cq:
@@ -13456,7 +13459,7 @@
"0368 Miss-matched fast-path completion "
"queue identifier: eqcqid=%d, fcpcqid=%d\n",
cqid, cq->queue_id);
- return;
+ return 0;
}
/* Save EQ associated with this CQ */
@@ -13486,6 +13489,8 @@
/* wake up worker thread if there are works to be done */
if (workposted)
lpfc_worker_wake_up(phba);
+
+ return ecount;
}
static void
@@ -13706,6 +13711,7 @@
struct lpfc_eqe *eqe;
unsigned long iflag;
int ecount = 0;
+ int ccount = 0;
int hba_eqidx;
/* Get the driver's phba structure from the dev_id */
@@ -13757,8 +13763,9 @@
if (eqe == NULL)
break;
- lpfc_sli4_hba_handle_eqe(phba, eqe, hba_eqidx);
- if (!(++ecount % fpeq->entry_repost))
+ ccount += lpfc_sli4_hba_handle_eqe(phba, eqe, hba_eqidx);
+ if (!(++ecount % fpeq->entry_repost) ||
+ ccount > LPFC_MAX_ISR_CQE)
break;
fpeq->EQ_processed++;
}
@@ -17051,7 +17058,7 @@
struct lpfc_dmabuf *pcmd = cmdiocb->context2;
if (pcmd && pcmd->virt)
- pci_pool_free(phba->lpfc_drb_pool, pcmd->virt, pcmd->phys);
+ dma_pool_free(phba->lpfc_drb_pool, pcmd->virt, pcmd->phys);
kfree(pcmd);
lpfc_sli_release_iocbq(phba, cmdiocb);
}
@@ -17079,7 +17086,7 @@
/* Allocate buffer for command payload */
pcmd = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
if (pcmd)
- pcmd->virt = pci_pool_alloc(phba->lpfc_drb_pool, GFP_KERNEL,
+ pcmd->virt = dma_pool_alloc(phba->lpfc_drb_pool, GFP_KERNEL,
&pcmd->phys);
if (!pcmd || !pcmd->virt)
goto exit;
@@ -17128,7 +17135,7 @@
lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
"2023 Unable to process MDS loopback frame\n");
if (pcmd && pcmd->virt)
- pci_pool_free(phba->lpfc_drb_pool, pcmd->virt, pcmd->phys);
+ dma_pool_free(phba->lpfc_drb_pool, pcmd->virt, pcmd->phys);
kfree(pcmd);
lpfc_sli_release_iocbq(phba, iocbq);
lpfc_in_buf_free(phba, &dmabuf->dbuf);
@@ -18888,6 +18895,7 @@
struct lpfc_sglq *sglq;
struct lpfc_sli_ring *pring;
unsigned long iflags;
+ uint32_t ret = 0;
/* NVME_LS and NVME_LS ABTS requests. */
if (pwqe->iocb_flag & LPFC_IO_NVME_LS) {
@@ -18906,10 +18914,12 @@
}
bf_set(wqe_xri_tag, &pwqe->wqe.xmit_bls_rsp.wqe_com,
pwqe->sli4_xritag);
- if (lpfc_sli4_wq_put(phba->sli4_hba.nvmels_wq, wqe)) {
+ ret = lpfc_sli4_wq_put(phba->sli4_hba.nvmels_wq, wqe);
+ if (ret) {
spin_unlock_irqrestore(&pring->ring_lock, iflags);
- return WQE_ERROR;
+ return ret;
}
+
lpfc_sli_ringtxcmpl_put(phba, pring, pwqe);
spin_unlock_irqrestore(&pring->ring_lock, iflags);
return 0;
@@ -18924,9 +18934,10 @@
wq = phba->sli4_hba.nvme_wq[pwqe->hba_wqidx];
bf_set(wqe_cqid, &wqe->generic.wqe_com,
phba->sli4_hba.nvme_cq[pwqe->hba_wqidx]->queue_id);
- if (lpfc_sli4_wq_put(wq, wqe)) {
+ ret = lpfc_sli4_wq_put(wq, wqe);
+ if (ret) {
spin_unlock_irqrestore(&pring->ring_lock, iflags);
- return WQE_ERROR;
+ return ret;
}
lpfc_sli_ringtxcmpl_put(phba, pring, pwqe);
spin_unlock_irqrestore(&pring->ring_lock, iflags);
@@ -18950,9 +18961,10 @@
wq = phba->sli4_hba.nvme_wq[pwqe->hba_wqidx];
bf_set(wqe_cqid, &wqe->generic.wqe_com,
phba->sli4_hba.nvme_cq[pwqe->hba_wqidx]->queue_id);
- if (lpfc_sli4_wq_put(wq, wqe)) {
+ ret = lpfc_sli4_wq_put(wq, wqe);
+ if (ret) {
spin_unlock_irqrestore(&pring->ring_lock, iflags);
- return WQE_ERROR;
+ return ret;
}
lpfc_sli_ringtxcmpl_put(phba, pring, pwqe);
spin_unlock_irqrestore(&pring->ring_lock, iflags);
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index 7a1d74e..6020038 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -158,6 +158,7 @@
#define LPFC_MQ_REPOST 8
#define LPFC_CQ_REPOST 64
#define LPFC_RQ_REPOST 64
+#define LPFC_MAX_ISR_CQE 64
#define LPFC_RELEASE_NOTIFICATION_INTERVAL 32 /* For WQs */
uint32_t queue_id; /* Queue ID assigned by the hardware */
uint32_t assoc_qid; /* Queue ID associated with, for CQ/WQ/MQ */
@@ -419,6 +420,20 @@
#define LPFC_MULTI_CPU_AFFINITY 0xffffffff
};
+/*BB Credit recovery value*/
+struct lpfc_bbscn_params {
+ uint32_t word0;
+#define lpfc_bbscn_min_SHIFT 0
+#define lpfc_bbscn_min_MASK 0x0000000F
+#define lpfc_bbscn_min_WORD word0
+#define lpfc_bbscn_max_SHIFT 4
+#define lpfc_bbscn_max_MASK 0x0000000F
+#define lpfc_bbscn_max_WORD word0
+#define lpfc_bbscn_def_SHIFT 8
+#define lpfc_bbscn_def_MASK 0x0000000F
+#define lpfc_bbscn_def_WORD word0
+};
+
/* Port Capabilities for SLI4 Parameters */
struct lpfc_pc_sli4_params {
uint32_t supported;
@@ -550,6 +565,7 @@
uint32_t ue_to_rp;
struct lpfc_register sli_intf;
struct lpfc_pc_sli4_params pc_sli4_params;
+ struct lpfc_bbscn_params bbscn_params;
struct lpfc_hba_eq_hdl *hba_eq_hdl; /* HBA per-WQ handle */
/* Pointers to the constructed SLI4 queues */
@@ -621,8 +637,6 @@
uint16_t scsi_xri_start;
uint16_t els_xri_cnt;
uint16_t nvmet_xri_cnt;
- uint16_t nvmet_ctx_get_cnt;
- uint16_t nvmet_ctx_put_cnt;
uint16_t nvmet_io_wait_cnt;
uint16_t nvmet_io_wait_total;
struct list_head lpfc_els_sgl_list;
@@ -631,9 +645,8 @@
struct list_head lpfc_abts_nvmet_ctx_list;
struct list_head lpfc_abts_scsi_buf_list;
struct list_head lpfc_abts_nvme_buf_list;
- struct list_head lpfc_nvmet_ctx_get_list;
- struct list_head lpfc_nvmet_ctx_put_list;
struct list_head lpfc_nvmet_io_wait_list;
+ struct lpfc_nvmet_ctx_info *nvmet_ctx_info;
struct lpfc_sglq **lpfc_sglq_active_list;
struct list_head lpfc_rpi_hdr_list;
unsigned long *rpi_bmask;
@@ -664,8 +677,6 @@
spinlock_t abts_nvme_buf_list_lock; /* list of aborted SCSI IOs */
spinlock_t abts_scsi_buf_list_lock; /* list of aborted SCSI IOs */
spinlock_t sgl_list_lock; /* list of aborted els IOs */
- spinlock_t nvmet_ctx_get_lock; /* list of avail XRI contexts */
- spinlock_t nvmet_ctx_put_lock; /* list of avail XRI contexts */
spinlock_t nvmet_io_wait_lock; /* IOs waiting for ctx resources */
uint32_t physical_port;
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index c6a24c3..6aa192b 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -20,7 +20,7 @@
* included with this package. *
*******************************************************************/
-#define LPFC_DRIVER_VERSION "11.4.0.1"
+#define LPFC_DRIVER_VERSION "11.4.0.3"
#define LPFC_DRIVER_NAME "lpfc"
/* Used for SLI 2/3 */
diff --git a/drivers/scsi/mac53c94.c b/drivers/scsi/mac53c94.c
index a6682c5..8c4d3003 100644
--- a/drivers/scsi/mac53c94.c
+++ b/drivers/scsi/mac53c94.c
@@ -448,15 +448,14 @@
ioremap(macio_resource_start(mdev, 1), 0x1000);
state->dmaintr = macio_irq(mdev, 1);
if (state->regs == NULL || state->dma == NULL) {
- printk(KERN_ERR "mac53c94: ioremap failed for %s\n",
- node->full_name);
+ printk(KERN_ERR "mac53c94: ioremap failed for %pOF\n", node);
goto out_free;
}
clkprop = of_get_property(node, "clock-frequency", &proplen);
if (clkprop == NULL || proplen != sizeof(int)) {
- printk(KERN_ERR "%s: can't get clock frequency, "
- "assuming 25MHz\n", node->full_name);
+ printk(KERN_ERR "%pOF: can't get clock frequency, "
+ "assuming 25MHz\n", node);
state->clk_freq = 25000000;
} else
state->clk_freq = *(int *)clkprop;
@@ -469,7 +468,7 @@
sizeof(struct dbdma_cmd), GFP_KERNEL);
if (dma_cmd_space == 0) {
printk(KERN_ERR "mac53c94: couldn't allocate dma "
- "command space for %s\n", node->full_name);
+ "command space for %pOF\n", node);
rc = -ENOMEM;
goto out_free;
}
@@ -481,8 +480,8 @@
mac53c94_init(state);
if (request_irq(state->intr, do_mac53c94_interrupt, 0, "53C94",state)) {
- printk(KERN_ERR "mac53C94: can't get irq %d for %s\n",
- state->intr, node->full_name);
+ printk(KERN_ERR "mac53C94: can't get irq %d for %pOF\n",
+ state->intr, node);
goto out_free_dma;
}
diff --git a/drivers/scsi/mac_esp.c b/drivers/scsi/mac_esp.c
index cdb61ea..eb551f3 100644
--- a/drivers/scsi/mac_esp.c
+++ b/drivers/scsi/mac_esp.c
@@ -348,26 +348,24 @@
u32 dma_count, int write, u8 cmd)
{
struct mac_esp_priv *mep = MAC_ESP_GET_PRIV(esp);
- u8 *fifo = esp->regs + ESP_FDATA * 16;
+ u8 __iomem *fifo = esp->regs + ESP_FDATA * 16;
+ u8 phase = esp->sreg & ESP_STAT_PMASK;
cmd &= ~ESP_CMD_DMA;
mep->error = 0;
if (write) {
+ u8 *dst = (u8 *)addr;
+ u8 mask = ~(phase == ESP_MIP ? ESP_INTR_FDONE : ESP_INTR_BSERV);
+
scsi_esp_cmd(esp, cmd);
while (1) {
- unsigned int n;
-
- n = mac_esp_wait_for_fifo(esp);
- if (!n)
+ if (!mac_esp_wait_for_fifo(esp))
break;
- if (n > esp_count)
- n = esp_count;
- esp_count -= n;
-
- MAC_ESP_PIO_LOOP("%2@,%0@+", n);
+ *dst++ = esp_read8(ESP_FDATA);
+ --esp_count;
if (!esp_count)
break;
@@ -375,14 +373,17 @@
if (mac_esp_wait_for_intr(esp))
break;
- if (((esp->sreg & ESP_STAT_PMASK) != ESP_DIP) &&
- ((esp->sreg & ESP_STAT_PMASK) != ESP_MIP))
+ if ((esp->sreg & ESP_STAT_PMASK) != phase)
break;
esp->ireg = esp_read8(ESP_INTRPT);
- if ((esp->ireg & (ESP_INTR_DC | ESP_INTR_BSERV)) !=
- ESP_INTR_BSERV)
+ if (esp->ireg & mask) {
+ mep->error = 1;
break;
+ }
+
+ if (phase == ESP_MIP)
+ scsi_esp_cmd(esp, ESP_CMD_MOK);
scsi_esp_cmd(esp, ESP_CMD_TI);
}
@@ -402,14 +403,14 @@
if (mac_esp_wait_for_intr(esp))
break;
- if (((esp->sreg & ESP_STAT_PMASK) != ESP_DOP) &&
- ((esp->sreg & ESP_STAT_PMASK) != ESP_MOP))
+ if ((esp->sreg & ESP_STAT_PMASK) != phase)
break;
esp->ireg = esp_read8(ESP_INTRPT);
- if ((esp->ireg & (ESP_INTR_DC | ESP_INTR_BSERV)) !=
- ESP_INTR_BSERV)
+ if (esp->ireg & ~ESP_INTR_BSERV) {
+ mep->error = 1;
break;
+ }
n = MAC_ESP_FIFO_SIZE -
(esp_read8(ESP_FFLAGS) & ESP_FF_FBYTES);
diff --git a/drivers/scsi/mac_scsi.c b/drivers/scsi/mac_scsi.c
index 196acc7..dd60573 100644
--- a/drivers/scsi/mac_scsi.c
+++ b/drivers/scsi/mac_scsi.c
@@ -41,7 +41,7 @@
#define NCR5380_intr macscsi_intr
#define NCR5380_queue_command macscsi_queue_command
#define NCR5380_abort macscsi_abort
-#define NCR5380_bus_reset macscsi_bus_reset
+#define NCR5380_host_reset macscsi_host_reset
#define NCR5380_info macscsi_info
#include "NCR5380.h"
@@ -328,7 +328,7 @@
.info = macscsi_info,
.queuecommand = macscsi_queue_command,
.eh_abort_handler = macscsi_abort,
- .eh_bus_reset_handler = macscsi_bus_reset,
+ .eh_host_reset_handler = macscsi_host_reset,
.can_queue = 16,
.this_id = 7,
.sg_tablesize = 1,
diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
index 3c63c29..7195cff 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -311,13 +311,15 @@
right 8 bits making them zero. This 0 value was hardcoded to fix
sparse warnings. */
if (adapter->product_info.subsysvid == PCI_VENDOR_ID_HP) {
- sprintf (adapter->fw_version, "%c%d%d.%d%d",
+ snprintf(adapter->fw_version, sizeof(adapter->fw_version),
+ "%c%d%d.%d%d",
adapter->product_info.fw_version[2],
0,
adapter->product_info.fw_version[1] & 0x0f,
0,
adapter->product_info.fw_version[0] & 0x0f);
- sprintf (adapter->bios_version, "%c%d%d.%d%d",
+ snprintf(adapter->bios_version, sizeof(adapter->fw_version),
+ "%c%d%d.%d%d",
adapter->product_info.bios_version[2],
0,
adapter->product_info.bios_version[1] & 0x0f,
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index f0987f2..ec3c438 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -341,8 +341,6 @@
.proc_name = "megaraid",
.queuecommand = megaraid_queue_command,
.eh_abort_handler = megaraid_abort_handler,
- .eh_device_reset_handler = megaraid_reset_handler,
- .eh_bus_reset_handler = megaraid_reset_handler,
.eh_host_reset_handler = megaraid_reset_handler,
.change_queue_depth = scsi_change_queue_depth,
.use_clustering = ENABLE_CLUSTERING,
@@ -1153,8 +1151,8 @@
// Allocate memory for 16-bytes aligned mailboxes
- raid_dev->mbox_pool_handle = pci_pool_create("megaraid mbox pool",
- adapter->pdev,
+ raid_dev->mbox_pool_handle = dma_pool_create("megaraid mbox pool",
+ &adapter->pdev->dev,
sizeof(mbox64_t) + 16,
16, 0);
@@ -1164,7 +1162,7 @@
mbox_pci_blk = raid_dev->mbox_pool;
for (i = 0; i < MBOX_MAX_SCSI_CMDS; i++) {
- mbox_pci_blk[i].vaddr = pci_pool_alloc(
+ mbox_pci_blk[i].vaddr = dma_pool_alloc(
raid_dev->mbox_pool_handle,
GFP_KERNEL,
&mbox_pci_blk[i].dma_addr);
@@ -1181,8 +1179,8 @@
* share common memory pool. Passthru structures piggyback on memory
* allocted to extended passthru since passthru is smaller of the two
*/
- raid_dev->epthru_pool_handle = pci_pool_create("megaraid mbox pthru",
- adapter->pdev, sizeof(mraid_epassthru_t), 128, 0);
+ raid_dev->epthru_pool_handle = dma_pool_create("megaraid mbox pthru",
+ &adapter->pdev->dev, sizeof(mraid_epassthru_t), 128, 0);
if (raid_dev->epthru_pool_handle == NULL) {
goto fail_setup_dma_pool;
@@ -1190,7 +1188,7 @@
epthru_pci_blk = raid_dev->epthru_pool;
for (i = 0; i < MBOX_MAX_SCSI_CMDS; i++) {
- epthru_pci_blk[i].vaddr = pci_pool_alloc(
+ epthru_pci_blk[i].vaddr = dma_pool_alloc(
raid_dev->epthru_pool_handle,
GFP_KERNEL,
&epthru_pci_blk[i].dma_addr);
@@ -1202,8 +1200,8 @@
// Allocate memory for each scatter-gather list. Request for 512 bytes
// alignment for each sg list
- raid_dev->sg_pool_handle = pci_pool_create("megaraid mbox sg",
- adapter->pdev,
+ raid_dev->sg_pool_handle = dma_pool_create("megaraid mbox sg",
+ &adapter->pdev->dev,
sizeof(mbox_sgl64) * MBOX_MAX_SG_SIZE,
512, 0);
@@ -1213,7 +1211,7 @@
sg_pci_blk = raid_dev->sg_pool;
for (i = 0; i < MBOX_MAX_SCSI_CMDS; i++) {
- sg_pci_blk[i].vaddr = pci_pool_alloc(
+ sg_pci_blk[i].vaddr = dma_pool_alloc(
raid_dev->sg_pool_handle,
GFP_KERNEL,
&sg_pci_blk[i].dma_addr);
@@ -1249,29 +1247,29 @@
sg_pci_blk = raid_dev->sg_pool;
for (i = 0; i < MBOX_MAX_SCSI_CMDS && sg_pci_blk[i].vaddr; i++) {
- pci_pool_free(raid_dev->sg_pool_handle, sg_pci_blk[i].vaddr,
+ dma_pool_free(raid_dev->sg_pool_handle, sg_pci_blk[i].vaddr,
sg_pci_blk[i].dma_addr);
}
if (raid_dev->sg_pool_handle)
- pci_pool_destroy(raid_dev->sg_pool_handle);
+ dma_pool_destroy(raid_dev->sg_pool_handle);
epthru_pci_blk = raid_dev->epthru_pool;
for (i = 0; i < MBOX_MAX_SCSI_CMDS && epthru_pci_blk[i].vaddr; i++) {
- pci_pool_free(raid_dev->epthru_pool_handle,
+ dma_pool_free(raid_dev->epthru_pool_handle,
epthru_pci_blk[i].vaddr, epthru_pci_blk[i].dma_addr);
}
if (raid_dev->epthru_pool_handle)
- pci_pool_destroy(raid_dev->epthru_pool_handle);
+ dma_pool_destroy(raid_dev->epthru_pool_handle);
mbox_pci_blk = raid_dev->mbox_pool;
for (i = 0; i < MBOX_MAX_SCSI_CMDS && mbox_pci_blk[i].vaddr; i++) {
- pci_pool_free(raid_dev->mbox_pool_handle,
+ dma_pool_free(raid_dev->mbox_pool_handle,
mbox_pci_blk[i].vaddr, mbox_pci_blk[i].dma_addr);
}
if (raid_dev->mbox_pool_handle)
- pci_pool_destroy(raid_dev->mbox_pool_handle);
+ dma_pool_destroy(raid_dev->mbox_pool_handle);
return;
}
diff --git a/drivers/scsi/megaraid/megaraid_mm.c b/drivers/scsi/megaraid/megaraid_mm.c
index 544d6f7..65b6f6a 100644
--- a/drivers/scsi/megaraid/megaraid_mm.c
+++ b/drivers/scsi/megaraid/megaraid_mm.c
@@ -574,7 +574,7 @@
kioc->pool_index = right_pool;
kioc->free_buf = 1;
- kioc->buf_vaddr = pci_pool_alloc(pool->handle, GFP_ATOMIC,
+ kioc->buf_vaddr = dma_pool_alloc(pool->handle, GFP_ATOMIC,
&kioc->buf_paddr);
spin_unlock_irqrestore(&pool->lock, flags);
@@ -658,7 +658,7 @@
* not in use
*/
if (kioc->free_buf == 1)
- pci_pool_free(pool->handle, kioc->buf_vaddr,
+ dma_pool_free(pool->handle, kioc->buf_vaddr,
kioc->buf_paddr);
else
pool->in_use = 0;
@@ -940,8 +940,8 @@
GFP_KERNEL);
adapter->mbox_list = kmalloc(sizeof(mbox64_t) * lld_adp->max_kioc,
GFP_KERNEL);
- adapter->pthru_dma_pool = pci_pool_create("megaraid mm pthru pool",
- adapter->pdev,
+ adapter->pthru_dma_pool = dma_pool_create("megaraid mm pthru pool",
+ &adapter->pdev->dev,
sizeof(mraid_passthru_t),
16, 0);
@@ -970,7 +970,7 @@
kioc = adapter->kioc_list + i;
kioc->cmdbuf = (uint64_t)(unsigned long)(mbox_list + i);
- kioc->pthru32 = pci_pool_alloc(adapter->pthru_dma_pool,
+ kioc->pthru32 = dma_pool_alloc(adapter->pthru_dma_pool,
GFP_KERNEL, &kioc->pthru32_h);
if (!kioc->pthru32) {
@@ -1006,7 +1006,7 @@
for (i = 0; i < lld_adp->max_kioc; i++) {
kioc = adapter->kioc_list + i;
if (kioc->pthru32) {
- pci_pool_free(adapter->pthru_dma_pool, kioc->pthru32,
+ dma_pool_free(adapter->pthru_dma_pool, kioc->pthru32,
kioc->pthru32_h);
}
}
@@ -1017,7 +1017,7 @@
kfree(adapter->mbox_list);
if (adapter->pthru_dma_pool)
- pci_pool_destroy(adapter->pthru_dma_pool);
+ dma_pool_destroy(adapter->pthru_dma_pool);
kfree(adapter);
@@ -1086,14 +1086,15 @@
pool->buf_size = bufsize;
spin_lock_init(&pool->lock);
- pool->handle = pci_pool_create("megaraid mm data buffer",
- adp->pdev, bufsize, 16, 0);
+ pool->handle = dma_pool_create("megaraid mm data buffer",
+ &adp->pdev->dev, bufsize,
+ 16, 0);
if (!pool->handle) {
goto dma_pool_setup_error;
}
- pool->vaddr = pci_pool_alloc(pool->handle, GFP_KERNEL,
+ pool->vaddr = dma_pool_alloc(pool->handle, GFP_KERNEL,
&pool->paddr);
if (!pool->vaddr)
@@ -1163,14 +1164,14 @@
kioc = adp->kioc_list + i;
- pci_pool_free(adp->pthru_dma_pool, kioc->pthru32,
+ dma_pool_free(adp->pthru_dma_pool, kioc->pthru32,
kioc->pthru32_h);
}
kfree(adp->kioc_list);
kfree(adp->mbox_list);
- pci_pool_destroy(adp->pthru_dma_pool);
+ dma_pool_destroy(adp->pthru_dma_pool);
return;
@@ -1194,10 +1195,10 @@
if (pool->handle) {
if (pool->vaddr)
- pci_pool_free(pool->handle, pool->vaddr,
+ dma_pool_free(pool->handle, pool->vaddr,
pool->paddr);
- pci_pool_destroy(pool->handle);
+ dma_pool_destroy(pool->handle);
pool->handle = NULL;
}
}
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index 2b209bb..a6722c9 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -35,8 +35,8 @@
/*
* MegaRAID SAS Driver meta data
*/
-#define MEGASAS_VERSION "07.701.17.00-rc1"
-#define MEGASAS_RELDATE "March 2, 2017"
+#define MEGASAS_VERSION "07.702.06.00-rc1"
+#define MEGASAS_RELDATE "June 21, 2017"
/*
* Device IDs
@@ -2115,7 +2115,6 @@
u32 *crash_dump_buf;
dma_addr_t crash_dump_h;
void *crash_buf[MAX_CRASH_DUMP_SIZE];
- u32 crash_buf_pages;
unsigned int fw_crash_buffer_size;
unsigned int fw_crash_state;
unsigned int fw_crash_buffer_offset;
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 71c4746..e518dad 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -49,6 +49,7 @@
#include <linux/blkdev.h>
#include <linux/mutex.h>
#include <linux/poll.h>
+#include <linux/vmalloc.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
@@ -1995,9 +1996,12 @@
if (cmd_fusion->sync_cmd_idx != (u32)ULONG_MAX) {
cmd_mfi = instance->cmd_list[cmd_fusion->sync_cmd_idx];
if (cmd_mfi->sync_cmd &&
- cmd_mfi->frame->hdr.cmd != MFI_CMD_ABORT)
+ (cmd_mfi->frame->hdr.cmd != MFI_CMD_ABORT)) {
+ cmd_mfi->frame->hdr.cmd_status =
+ MFI_STAT_WRONG_STATE;
megasas_complete_cmd(instance,
cmd_mfi, DID_OK);
+ }
}
}
} else {
@@ -2791,7 +2795,7 @@
cmd = (struct megasas_cmd_fusion *)scmd->SCp.ptr;
if (cmd)
megasas_dump_frame(cmd->io_request,
- sizeof(struct MPI2_RAID_SCSI_IO_REQUEST));
+ MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE);
ret = megasas_reset_fusion(scmd->device->host,
SCSIIO_TIMEOUT_OCR);
} else
@@ -3862,19 +3866,19 @@
cmd = instance->cmd_list[i];
if (cmd->frame)
- pci_pool_free(instance->frame_dma_pool, cmd->frame,
+ dma_pool_free(instance->frame_dma_pool, cmd->frame,
cmd->frame_phys_addr);
if (cmd->sense)
- pci_pool_free(instance->sense_dma_pool, cmd->sense,
+ dma_pool_free(instance->sense_dma_pool, cmd->sense,
cmd->sense_phys_addr);
}
/*
* Now destroy the pool itself
*/
- pci_pool_destroy(instance->frame_dma_pool);
- pci_pool_destroy(instance->sense_dma_pool);
+ dma_pool_destroy(instance->frame_dma_pool);
+ dma_pool_destroy(instance->sense_dma_pool);
instance->frame_dma_pool = NULL;
instance->sense_dma_pool = NULL;
@@ -3925,22 +3929,23 @@
/*
* Use DMA pool facility provided by PCI layer
*/
- instance->frame_dma_pool = pci_pool_create("megasas frame pool",
- instance->pdev, instance->mfi_frame_size,
- 256, 0);
+ instance->frame_dma_pool = dma_pool_create("megasas frame pool",
+ &instance->pdev->dev,
+ instance->mfi_frame_size, 256, 0);
if (!instance->frame_dma_pool) {
dev_printk(KERN_DEBUG, &instance->pdev->dev, "failed to setup frame pool\n");
return -ENOMEM;
}
- instance->sense_dma_pool = pci_pool_create("megasas sense pool",
- instance->pdev, 128, 4, 0);
+ instance->sense_dma_pool = dma_pool_create("megasas sense pool",
+ &instance->pdev->dev, 128,
+ 4, 0);
if (!instance->sense_dma_pool) {
dev_printk(KERN_DEBUG, &instance->pdev->dev, "failed to setup sense pool\n");
- pci_pool_destroy(instance->frame_dma_pool);
+ dma_pool_destroy(instance->frame_dma_pool);
instance->frame_dma_pool = NULL;
return -ENOMEM;
@@ -3955,10 +3960,10 @@
cmd = instance->cmd_list[i];
- cmd->frame = pci_pool_alloc(instance->frame_dma_pool,
+ cmd->frame = dma_pool_alloc(instance->frame_dma_pool,
GFP_KERNEL, &cmd->frame_phys_addr);
- cmd->sense = pci_pool_alloc(instance->sense_dma_pool,
+ cmd->sense = dma_pool_alloc(instance->sense_dma_pool,
GFP_KERNEL, &cmd->sense_phys_addr);
/*
@@ -3966,7 +3971,7 @@
* whatever has been allocated
*/
if (!cmd->frame || !cmd->sense) {
- dev_printk(KERN_DEBUG, &instance->pdev->dev, "pci_pool_alloc failed\n");
+ dev_printk(KERN_DEBUG, &instance->pdev->dev, "dma_pool_alloc failed\n");
megasas_teardown_frame_pool(instance);
return -ENOMEM;
}
@@ -5478,7 +5483,8 @@
instance->throttlequeuedepth =
MEGASAS_THROTTLE_QUEUE_DEPTH;
- if (resetwaittime > MEGASAS_RESET_WAIT_TIME)
+ if ((resetwaittime < 1) ||
+ (resetwaittime > MEGASAS_RESET_WAIT_TIME))
resetwaittime = MEGASAS_RESET_WAIT_TIME;
if ((scmd_timeout < 10) || (scmd_timeout > MEGASAS_DEFAULT_CMD_TIMEOUT))
@@ -5649,6 +5655,14 @@
prev_aen.word =
le32_to_cpu(instance->aen_cmd->frame->dcmd.mbox.w[1]);
+ if ((curr_aen.members.class < MFI_EVT_CLASS_DEBUG) ||
+ (curr_aen.members.class > MFI_EVT_CLASS_DEAD)) {
+ dev_info(&instance->pdev->dev,
+ "%s %d out of range class %d send by application\n",
+ __func__, __LINE__, curr_aen.members.class);
+ return 0;
+ }
+
/*
* A class whose enum value is smaller is inclusive of all
* higher values. If a PROGRESS (= -1) was previously
@@ -6096,14 +6110,12 @@
instance->pd_info = pci_alloc_consistent(pdev,
sizeof(struct MR_PD_INFO), &instance->pd_info_h);
- instance->pd_info = pci_alloc_consistent(pdev,
- sizeof(struct MR_PD_INFO), &instance->pd_info_h);
- instance->tgt_prop = pci_alloc_consistent(pdev,
- sizeof(struct MR_TARGET_PROPERTIES), &instance->tgt_prop_h);
-
if (!instance->pd_info)
dev_err(&instance->pdev->dev, "Failed to alloc mem for pd_info\n");
+ instance->tgt_prop = pci_alloc_consistent(pdev,
+ sizeof(struct MR_TARGET_PROPERTIES), &instance->tgt_prop_h);
+
if (!instance->tgt_prop)
dev_err(&instance->pdev->dev, "Failed to alloc mem for tgt_prop\n");
@@ -6663,9 +6675,14 @@
fusion->max_map_sz,
fusion->ld_map[i],
fusion->ld_map_phys[i]);
- if (fusion->ld_drv_map[i])
- free_pages((ulong)fusion->ld_drv_map[i],
- fusion->drv_map_pages);
+ if (fusion->ld_drv_map[i]) {
+ if (is_vmalloc_addr(fusion->ld_drv_map[i]))
+ vfree(fusion->ld_drv_map[i]);
+ else
+ free_pages((ulong)fusion->ld_drv_map[i],
+ fusion->drv_map_pages);
+ }
+
if (fusion->pd_seq_sync[i])
dma_free_coherent(&instance->pdev->dev,
pd_seq_map_sz,
@@ -6866,6 +6883,7 @@
void *sense = NULL;
dma_addr_t sense_handle;
unsigned long *sense_ptr;
+ u32 opcode;
memset(kbuff_arr, 0, sizeof(kbuff_arr));
@@ -6893,15 +6911,16 @@
cmd->frame->hdr.flags &= cpu_to_le16(~(MFI_FRAME_IEEE |
MFI_FRAME_SGL64 |
MFI_FRAME_SENSE64));
+ opcode = le32_to_cpu(cmd->frame->dcmd.opcode);
- if (cmd->frame->dcmd.opcode == MR_DCMD_CTRL_SHUTDOWN) {
+ if (opcode == MR_DCMD_CTRL_SHUTDOWN) {
if (megasas_get_ctrl_info(instance) != DCMD_SUCCESS) {
megasas_return_cmd(instance, cmd);
return -1;
}
}
- if (cmd->frame->dcmd.opcode == MR_DRIVER_SET_APP_CRASHDUMP_MODE) {
+ if (opcode == MR_DRIVER_SET_APP_CRASHDUMP_MODE) {
error = megasas_set_crash_dump_params_ioctl(cmd);
megasas_return_cmd(instance, cmd);
return error;
@@ -6975,8 +6994,7 @@
cmd->sync_cmd = 0;
dev_err(&instance->pdev->dev,
"return -EBUSY from %s %d opcode 0x%x cmd->cmd_status_drv 0x%x\n",
- __func__, __LINE__, cmd->frame->dcmd.opcode,
- cmd->cmd_status_drv);
+ __func__, __LINE__, opcode, cmd->cmd_status_drv);
return -EBUSY;
}
@@ -7323,49 +7341,39 @@
/*
* Sysfs driver attributes
*/
-static ssize_t megasas_sysfs_show_version(struct device_driver *dd, char *buf)
+static ssize_t version_show(struct device_driver *dd, char *buf)
{
return snprintf(buf, strlen(MEGASAS_VERSION) + 2, "%s\n",
MEGASAS_VERSION);
}
+static DRIVER_ATTR_RO(version);
-static DRIVER_ATTR(version, S_IRUGO, megasas_sysfs_show_version, NULL);
-
-static ssize_t
-megasas_sysfs_show_release_date(struct device_driver *dd, char *buf)
+static ssize_t release_date_show(struct device_driver *dd, char *buf)
{
return snprintf(buf, strlen(MEGASAS_RELDATE) + 2, "%s\n",
MEGASAS_RELDATE);
}
+static DRIVER_ATTR_RO(release_date);
-static DRIVER_ATTR(release_date, S_IRUGO, megasas_sysfs_show_release_date, NULL);
-
-static ssize_t
-megasas_sysfs_show_support_poll_for_event(struct device_driver *dd, char *buf)
+static ssize_t support_poll_for_event_show(struct device_driver *dd, char *buf)
{
return sprintf(buf, "%u\n", support_poll_for_event);
}
+static DRIVER_ATTR_RO(support_poll_for_event);
-static DRIVER_ATTR(support_poll_for_event, S_IRUGO,
- megasas_sysfs_show_support_poll_for_event, NULL);
-
- static ssize_t
-megasas_sysfs_show_support_device_change(struct device_driver *dd, char *buf)
+static ssize_t support_device_change_show(struct device_driver *dd, char *buf)
{
return sprintf(buf, "%u\n", support_device_change);
}
+static DRIVER_ATTR_RO(support_device_change);
-static DRIVER_ATTR(support_device_change, S_IRUGO,
- megasas_sysfs_show_support_device_change, NULL);
-
-static ssize_t
-megasas_sysfs_show_dbg_lvl(struct device_driver *dd, char *buf)
+static ssize_t dbg_lvl_show(struct device_driver *dd, char *buf)
{
return sprintf(buf, "%u\n", megasas_dbg_lvl);
}
-static ssize_t
-megasas_sysfs_set_dbg_lvl(struct device_driver *dd, const char *buf, size_t count)
+static ssize_t dbg_lvl_store(struct device_driver *dd, const char *buf,
+ size_t count)
{
int retval = count;
@@ -7375,9 +7383,7 @@
}
return retval;
}
-
-static DRIVER_ATTR(dbg_lvl, S_IRUGO|S_IWUSR, megasas_sysfs_show_dbg_lvl,
- megasas_sysfs_set_dbg_lvl);
+static DRIVER_ATTR_RW(dbg_lvl);
static inline void megasas_remove_scsi_device(struct scsi_device *sdev)
{
diff --git a/drivers/scsi/megaraid/megaraid_sas_fp.c b/drivers/scsi/megaraid/megaraid_sas_fp.c
index 62affa7..ecc699a 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fp.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fp.c
@@ -67,16 +67,6 @@
#define ABS_DIFF(a, b) (((a) > (b)) ? ((a) - (b)) : ((b) - (a)))
#define MR_LD_STATE_OPTIMAL 3
-#ifdef FALSE
-#undef FALSE
-#endif
-#define FALSE 0
-
-#ifdef TRUE
-#undef TRUE
-#endif
-#define TRUE 1
-
#define SPAN_ROW_SIZE(map, ld, index_) (MR_LdSpanPtrGet(ld, index_, map)->spanRowSize)
#define SPAN_ROW_DATA_SIZE(map_, ld, index_) (MR_LdSpanPtrGet(ld, index_, map)->spanRowDataSize)
#define SPAN_INVALID 0xff
@@ -709,7 +699,7 @@
u32 pd, arRef, r1_alt_pd;
u8 physArm, span;
u64 row;
- u8 retval = TRUE;
+ u8 retval = true;
u64 *pdBlock = &io_info->pdBlock;
__le16 *pDevHandle = &io_info->devHandle;
u8 *pPdInterface = &io_info->pd_interface;
@@ -727,7 +717,7 @@
if (raid->level == 6) {
logArm = get_arm_from_strip(instance, ld, stripRow, map);
if (logArm == -1U)
- return FALSE;
+ return false;
rowMod = mega_mod64(row, SPAN_ROW_SIZE(map, ld, span));
armQ = SPAN_ROW_SIZE(map, ld, span) - 1 - rowMod;
arm = armQ + 1 + logArm;
@@ -738,7 +728,7 @@
/* Calculate the arm */
physArm = get_arm(instance, ld, span, stripRow, map);
if (physArm == 0xFF)
- return FALSE;
+ return false;
arRef = MR_LdSpanArrayGet(ld, span, map);
pd = MR_ArPdGet(arRef, physArm, map);
@@ -812,7 +802,7 @@
u32 pd, arRef, r1_alt_pd;
u8 physArm, span;
u64 row;
- u8 retval = TRUE;
+ u8 retval = true;
u64 *pdBlock = &io_info->pdBlock;
__le16 *pDevHandle = &io_info->devHandle;
u8 *pPdInterface = &io_info->pd_interface;
@@ -829,7 +819,7 @@
u32 rowMod, armQ, arm;
if (raid->rowSize == 0)
- return FALSE;
+ return false;
/* get logical row mod */
rowMod = mega_mod64(row, raid->rowSize);
armQ = raid->rowSize-1-rowMod; /* index of Q drive */
@@ -839,7 +829,7 @@
physArm = (u8)arm;
} else {
if (raid->modFactor == 0)
- return FALSE;
+ return false;
physArm = MR_LdDataArmGet(ld, mega_mod64(stripRow,
raid->modFactor),
map);
@@ -851,7 +841,7 @@
} else {
span = (u8)MR_GetSpanBlock(ld, row, pdBlock, map);
if (span == SPAN_INVALID)
- return FALSE;
+ return false;
}
/* Get the array on which this span is present */
@@ -954,7 +944,7 @@
*/
if (raid->rowDataSize == 0) {
if (MR_LdSpanPtrGet(ld, 0, map)->spanRowDataSize == 0)
- return FALSE;
+ return false;
else if (instance->UnevenSpanSupport) {
io_info->IoforUnevenSpan = 1;
} else {
@@ -963,7 +953,7 @@
"rowDataSize = 0x%0x,"
"but there is _NO_ UnevenSpanSupport\n",
MR_LdSpanPtrGet(ld, 0, map)->spanRowDataSize);
- return FALSE;
+ return false;
}
}
@@ -988,7 +978,7 @@
dev_info(&instance->pdev->dev, "return from %s %d."
"Send IO w/o region lock.\n",
__func__, __LINE__);
- return FALSE;
+ return false;
}
if (raid->spanDepth == 1) {
@@ -1004,7 +994,7 @@
(unsigned long long)start_row,
(unsigned long long)start_strip,
(unsigned long long)endStrip);
- return FALSE;
+ return false;
}
io_info->start_span = startlba_span;
io_info->start_row = start_row;
@@ -1038,7 +1028,7 @@
raid->capability.
fpWriteAcrossStripe));
} else
- io_info->fpOkForIo = FALSE;
+ io_info->fpOkForIo = false;
if (numRows == 1) {
/* single-strip IOs can always lock only the data needed */
@@ -1124,7 +1114,7 @@
pRAID_Context, map);
/* If IO on an invalid Pd, then FP is not possible.*/
if (io_info->devHandle == MR_DEVHANDLE_INVALID)
- io_info->fpOkForIo = FALSE;
+ io_info->fpOkForIo = false;
return retval;
} else if (isRead) {
uint stripIdx;
@@ -1138,10 +1128,10 @@
start_strip + stripIdx, ref_in_start_stripe,
io_info, pRAID_Context, map);
if (!retval)
- return TRUE;
+ return true;
}
}
- return TRUE;
+ return true;
}
/*
diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c
index 9855106..11bd2e6 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fusion.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c
@@ -313,20 +313,20 @@
cmd = fusion->cmd_list[i];
if (cmd) {
if (cmd->sg_frame)
- pci_pool_free(fusion->sg_dma_pool, cmd->sg_frame,
+ dma_pool_free(fusion->sg_dma_pool, cmd->sg_frame,
cmd->sg_frame_phys_addr);
if (cmd->sense)
- pci_pool_free(fusion->sense_dma_pool, cmd->sense,
+ dma_pool_free(fusion->sense_dma_pool, cmd->sense,
cmd->sense_phys_addr);
}
}
if (fusion->sg_dma_pool) {
- pci_pool_destroy(fusion->sg_dma_pool);
+ dma_pool_destroy(fusion->sg_dma_pool);
fusion->sg_dma_pool = NULL;
}
if (fusion->sense_dma_pool) {
- pci_pool_destroy(fusion->sense_dma_pool);
+ dma_pool_destroy(fusion->sense_dma_pool);
fusion->sense_dma_pool = NULL;
}
@@ -343,11 +343,11 @@
fusion->request_alloc_sz, fusion->req_frames_desc,
fusion->req_frames_desc_phys);
if (fusion->io_request_frames)
- pci_pool_free(fusion->io_request_frames_pool,
+ dma_pool_free(fusion->io_request_frames_pool,
fusion->io_request_frames,
fusion->io_request_frames_phys);
if (fusion->io_request_frames_pool) {
- pci_pool_destroy(fusion->io_request_frames_pool);
+ dma_pool_destroy(fusion->io_request_frames_pool);
fusion->io_request_frames_pool = NULL;
}
@@ -376,12 +376,12 @@
fusion->sg_dma_pool =
- pci_pool_create("mr_sg", instance->pdev,
+ dma_pool_create("mr_sg", &instance->pdev->dev,
instance->max_chain_frame_sz,
MR_DEFAULT_NVME_PAGE_SIZE, 0);
/* SCSI_SENSE_BUFFERSIZE = 96 bytes */
fusion->sense_dma_pool =
- pci_pool_create("mr_sense", instance->pdev,
+ dma_pool_create("mr_sense", &instance->pdev->dev,
SCSI_SENSE_BUFFERSIZE, 64, 0);
if (!fusion->sense_dma_pool || !fusion->sg_dma_pool) {
@@ -395,10 +395,10 @@
*/
for (i = 0; i < max_cmd; i++) {
cmd = fusion->cmd_list[i];
- cmd->sg_frame = pci_pool_alloc(fusion->sg_dma_pool,
+ cmd->sg_frame = dma_pool_alloc(fusion->sg_dma_pool,
GFP_KERNEL, &cmd->sg_frame_phys_addr);
- cmd->sense = pci_pool_alloc(fusion->sense_dma_pool,
+ cmd->sense = dma_pool_alloc(fusion->sense_dma_pool,
GFP_KERNEL, &cmd->sense_phys_addr);
if (!cmd->sg_frame || !cmd->sense) {
dev_err(&instance->pdev->dev,
@@ -410,7 +410,7 @@
/* create sense buffer for the raid 1/10 fp */
for (i = max_cmd; i < instance->max_mpt_cmds; i++) {
cmd = fusion->cmd_list[i];
- cmd->sense = pci_pool_alloc(fusion->sense_dma_pool,
+ cmd->sense = dma_pool_alloc(fusion->sense_dma_pool,
GFP_KERNEL, &cmd->sense_phys_addr);
if (!cmd->sense) {
dev_err(&instance->pdev->dev,
@@ -479,7 +479,7 @@
}
fusion->io_request_frames_pool =
- pci_pool_create("mr_ioreq", instance->pdev,
+ dma_pool_create("mr_ioreq", &instance->pdev->dev,
fusion->io_frames_alloc_sz, 16, 0);
if (!fusion->io_request_frames_pool) {
@@ -489,7 +489,7 @@
}
fusion->io_request_frames =
- pci_pool_alloc(fusion->io_request_frames_pool,
+ dma_pool_alloc(fusion->io_request_frames_pool,
GFP_KERNEL, &fusion->io_request_frames_phys);
if (!fusion->io_request_frames) {
dev_err(&instance->pdev->dev,
@@ -509,7 +509,7 @@
count = instance->msix_vectors > 0 ? instance->msix_vectors : 1;
fusion->reply_frames_desc_pool =
- pci_pool_create("mr_reply", instance->pdev,
+ dma_pool_create("mr_reply", &instance->pdev->dev,
fusion->reply_alloc_sz * count, 16, 0);
if (!fusion->reply_frames_desc_pool) {
@@ -519,7 +519,7 @@
}
fusion->reply_frames_desc[0] =
- pci_pool_alloc(fusion->reply_frames_desc_pool,
+ dma_pool_alloc(fusion->reply_frames_desc_pool,
GFP_KERNEL, &fusion->reply_frames_desc_phys[0]);
if (!fusion->reply_frames_desc[0]) {
dev_err(&instance->pdev->dev,
@@ -562,8 +562,10 @@
memset(fusion->rdpq_virt, 0,
sizeof(struct MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY) * MAX_MSIX_QUEUES_FUSION);
count = instance->msix_vectors > 0 ? instance->msix_vectors : 1;
- fusion->reply_frames_desc_pool = pci_pool_create("mr_rdpq",
- instance->pdev, fusion->reply_alloc_sz, 16, 0);
+ fusion->reply_frames_desc_pool = dma_pool_create("mr_rdpq",
+ &instance->pdev->dev,
+ fusion->reply_alloc_sz,
+ 16, 0);
if (!fusion->reply_frames_desc_pool) {
dev_err(&instance->pdev->dev,
@@ -573,7 +575,7 @@
for (i = 0; i < count; i++) {
fusion->reply_frames_desc[i] =
- pci_pool_alloc(fusion->reply_frames_desc_pool,
+ dma_pool_alloc(fusion->reply_frames_desc_pool,
GFP_KERNEL, &fusion->reply_frames_desc_phys[i]);
if (!fusion->reply_frames_desc[i]) {
dev_err(&instance->pdev->dev,
@@ -601,13 +603,13 @@
for (i = 0; i < MAX_MSIX_QUEUES_FUSION; i++) {
if (fusion->reply_frames_desc[i])
- pci_pool_free(fusion->reply_frames_desc_pool,
+ dma_pool_free(fusion->reply_frames_desc_pool,
fusion->reply_frames_desc[i],
fusion->reply_frames_desc_phys[i]);
}
if (fusion->reply_frames_desc_pool)
- pci_pool_destroy(fusion->reply_frames_desc_pool);
+ dma_pool_destroy(fusion->reply_frames_desc_pool);
if (fusion->rdpq_virt)
pci_free_consistent(instance->pdev,
@@ -623,12 +625,12 @@
fusion = instance->ctrl_context;
if (fusion->reply_frames_desc[0])
- pci_pool_free(fusion->reply_frames_desc_pool,
+ dma_pool_free(fusion->reply_frames_desc_pool,
fusion->reply_frames_desc[0],
fusion->reply_frames_desc_phys[0]);
if (fusion->reply_frames_desc_pool)
- pci_pool_destroy(fusion->reply_frames_desc_pool);
+ dma_pool_destroy(fusion->reply_frames_desc_pool);
}
@@ -914,7 +916,6 @@
ret = 1;
goto fail_fw_init;
}
- dev_info(&instance->pdev->dev, "Init cmd success\n");
ret = 0;
@@ -925,6 +926,10 @@
sizeof(struct MPI2_IOC_INIT_REQUEST),
IOCInitMessage, ioc_init_handle);
fail_get_cmd:
+ dev_err(&instance->pdev->dev,
+ "Init cmd return status %s for SCSI host %d\n",
+ ret ? "FAILED" : "SUCCESS", instance->host->host_no);
+
return ret;
}
@@ -1261,6 +1266,80 @@
}
/**
+ * megasas_allocate_raid_maps - Allocate memory for RAID maps
+ * @instance: Adapter soft state
+ *
+ * return: if success: return 0
+ * failed: return -ENOMEM
+ */
+static inline int megasas_allocate_raid_maps(struct megasas_instance *instance)
+{
+ struct fusion_context *fusion;
+ int i = 0;
+
+ fusion = instance->ctrl_context;
+
+ fusion->drv_map_pages = get_order(fusion->drv_map_sz);
+
+ for (i = 0; i < 2; i++) {
+ fusion->ld_map[i] = NULL;
+
+ fusion->ld_drv_map[i] = (void *)
+ __get_free_pages(__GFP_ZERO | GFP_KERNEL,
+ fusion->drv_map_pages);
+
+ if (!fusion->ld_drv_map[i]) {
+ fusion->ld_drv_map[i] = vzalloc(fusion->drv_map_sz);
+
+ if (!fusion->ld_drv_map[i]) {
+ dev_err(&instance->pdev->dev,
+ "Could not allocate memory for local map"
+ " size requested: %d\n",
+ fusion->drv_map_sz);
+ goto ld_drv_map_alloc_fail;
+ }
+ }
+ }
+
+ for (i = 0; i < 2; i++) {
+ fusion->ld_map[i] = dma_alloc_coherent(&instance->pdev->dev,
+ fusion->max_map_sz,
+ &fusion->ld_map_phys[i],
+ GFP_KERNEL);
+ if (!fusion->ld_map[i]) {
+ dev_err(&instance->pdev->dev,
+ "Could not allocate memory for map info %s:%d\n",
+ __func__, __LINE__);
+ goto ld_map_alloc_fail;
+ }
+ }
+
+ return 0;
+
+ld_map_alloc_fail:
+ for (i = 0; i < 2; i++) {
+ if (fusion->ld_map[i])
+ dma_free_coherent(&instance->pdev->dev,
+ fusion->max_map_sz,
+ fusion->ld_map[i],
+ fusion->ld_map_phys[i]);
+ }
+
+ld_drv_map_alloc_fail:
+ for (i = 0; i < 2; i++) {
+ if (fusion->ld_drv_map[i]) {
+ if (is_vmalloc_addr(fusion->ld_drv_map[i]))
+ vfree(fusion->ld_drv_map[i]);
+ else
+ free_pages((ulong)fusion->ld_drv_map[i],
+ fusion->drv_map_pages);
+ }
+ }
+
+ return -ENOMEM;
+}
+
+/**
* megasas_init_adapter_fusion - Initializes the FW
* @instance: Adapter soft state
*
@@ -1379,45 +1458,14 @@
instance->r1_ldio_hint_default = MR_R1_LDIO_PIGGYBACK_DEFAULT;
fusion->fast_path_io = 0;
- fusion->drv_map_pages = get_order(fusion->drv_map_sz);
- for (i = 0; i < 2; i++) {
- fusion->ld_map[i] = NULL;
- fusion->ld_drv_map[i] = (void *)__get_free_pages(GFP_KERNEL,
- fusion->drv_map_pages);
- if (!fusion->ld_drv_map[i]) {
- dev_err(&instance->pdev->dev, "Could not allocate "
- "memory for local map info for %d pages\n",
- fusion->drv_map_pages);
- if (i == 1)
- free_pages((ulong)fusion->ld_drv_map[0],
- fusion->drv_map_pages);
- goto fail_ioc_init;
- }
- memset(fusion->ld_drv_map[i], 0,
- ((1 << PAGE_SHIFT) << fusion->drv_map_pages));
- }
-
- for (i = 0; i < 2; i++) {
- fusion->ld_map[i] = dma_alloc_coherent(&instance->pdev->dev,
- fusion->max_map_sz,
- &fusion->ld_map_phys[i],
- GFP_KERNEL);
- if (!fusion->ld_map[i]) {
- dev_err(&instance->pdev->dev, "Could not allocate memory "
- "for map info\n");
- goto fail_map_info;
- }
- }
+ if (megasas_allocate_raid_maps(instance))
+ goto fail_ioc_init;
if (!megasas_get_map_info(instance))
megasas_sync_map_info(instance);
return 0;
-fail_map_info:
- if (i == 1)
- dma_free_coherent(&instance->pdev->dev, fusion->max_map_sz,
- fusion->ld_map[0], fusion->ld_map_phys[0]);
fail_ioc_init:
megasas_free_cmds_fusion(instance);
fail_alloc_cmds:
@@ -3287,7 +3335,7 @@
mpi25_ieee_chain->Flags = IEEE_SGE_FLAGS_CHAIN_ELEMENT |
MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR;
- mpi25_ieee_chain->Length = cpu_to_le32(instance->max_chain_frame_sz);
+ mpi25_ieee_chain->Length = cpu_to_le32(instance->mfi_frame_size);
}
/**
@@ -3369,17 +3417,13 @@
{
unsigned int i;
- instance->crash_buf_pages = get_order(CRASH_DMA_BUF_SIZE);
for (i = 0; i < MAX_CRASH_DUMP_SIZE; i++) {
- instance->crash_buf[i] = (void *)__get_free_pages(GFP_KERNEL,
- instance->crash_buf_pages);
+ instance->crash_buf[i] = vzalloc(CRASH_DMA_BUF_SIZE);
if (!instance->crash_buf[i]) {
dev_info(&instance->pdev->dev, "Firmware crash dump "
"memory allocation failed at index %d\n", i);
break;
}
- memset(instance->crash_buf[i], 0,
- ((1 << PAGE_SHIFT) << instance->crash_buf_pages));
}
instance->drv_buf_alloc = i;
}
@@ -3391,12 +3435,10 @@
void
megasas_free_host_crash_buffer(struct megasas_instance *instance)
{
- unsigned int i
-;
+ unsigned int i;
for (i = 0; i < instance->drv_buf_alloc; i++) {
if (instance->crash_buf[i])
- free_pages((ulong)instance->crash_buf[i],
- instance->crash_buf_pages);
+ vfree(instance->crash_buf[i]);
}
instance->drv_buf_index = 0;
instance->drv_buf_alloc = 0;
@@ -3556,6 +3598,7 @@
}
}
+ megasas_complete_cmd_dpc_fusion((unsigned long)instance);
outstanding = atomic_read(&instance->fw_outstanding);
if (!outstanding)
goto out;
@@ -3564,8 +3607,6 @@
dev_notice(&instance->pdev->dev, "[%2d]waiting for %d "
"commands to complete for scsi%d\n", i,
outstanding, instance->host->host_no);
- megasas_complete_cmd_dpc_fusion(
- (unsigned long)instance);
}
msleep(1000);
}
@@ -3623,6 +3664,15 @@
if (!smid)
continue;
+
+ /* Do not refire shutdown command */
+ if (le32_to_cpu(cmd_mfi->frame->dcmd.opcode) ==
+ MR_DCMD_CTRL_SHUTDOWN) {
+ cmd_mfi->frame->dcmd.cmd_status = MFI_STAT_OK;
+ megasas_complete_cmd(instance, cmd_mfi, DID_OK);
+ continue;
+ }
+
req_desc = megasas_get_request_descriptor
(instance, smid - 1);
refire_cmd = req_desc && ((cmd_mfi->frame->dcmd.opcode !=
@@ -3750,7 +3800,7 @@
struct megasas_cmd_fusion *cmd_fusion;
struct megasas_cmd *cmd_mfi;
union MEGASAS_REQUEST_DESCRIPTOR_UNION *req_desc;
- struct fusion_context *fusion;
+ struct fusion_context *fusion = NULL;
struct megasas_cmd_fusion *scsi_lookup;
int rc;
struct MPI2_SCSI_TASK_MANAGE_REPLY *mpi_reply;
@@ -3777,8 +3827,6 @@
cmd_fusion->request_desc = req_desc;
req_desc->Words = 0;
- scsi_lookup = fusion->cmd_list[smid_task - 1];
-
mr_request = (struct MR_TASK_MANAGE_REQUEST *) cmd_fusion->io_request;
memset(mr_request, 0, sizeof(struct MR_TASK_MANAGE_REQUEST));
mpi_request = (struct MPI2_SCSI_TASK_MANAGE_REQUEST *) &mr_request->TmRequest;
@@ -3825,13 +3873,13 @@
rc = SUCCESS;
switch (type) {
case MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK:
+ scsi_lookup = fusion->cmd_list[smid_task - 1];
+
if (scsi_lookup->scmd == NULL)
break;
else {
instance->instancet->disable_intr(instance);
megasas_sync_irqs((unsigned long)instance);
- megasas_complete_cmd_dpc_fusion
- ((unsigned long)instance);
instance->instancet->enable_intr(instance);
if (scsi_lookup->scmd == NULL)
break;
@@ -3843,9 +3891,7 @@
if ((channel == 0xFFFFFFFF) && (id == 0xFFFFFFFF))
break;
instance->instancet->disable_intr(instance);
- msleep(1000);
- megasas_complete_cmd_dpc_fusion
- ((unsigned long)instance);
+ megasas_sync_irqs((unsigned long)instance);
rc = megasas_track_scsiio(instance, id, channel);
instance->instancet->enable_intr(instance);
@@ -4271,9 +4317,6 @@
megasas_fusion_update_can_queue(instance, OCR_CONTEXT);
if (megasas_ioc_init_fusion(instance)) {
- dev_warn(&instance->pdev->dev,
- "megasas_ioc_init_fusion() failed! for "
- "scsi%d\n", instance->host->host_no);
if (instance->requestorId && !reason)
goto fail_kill_adapter;
else
@@ -4319,6 +4362,10 @@
instance->instancet->enable_intr(instance);
atomic_set(&instance->adprecovery, MEGASAS_HBA_OPERATIONAL);
+ dev_info(&instance->pdev->dev, "Interrupts are enabled and"
+ " controller is OPERATIONAL for scsi:%d\n",
+ instance->host->host_no);
+
/* Restart SR-IOV heartbeat */
if (instance->requestorId) {
if (!megasas_sriov_start_heartbeat(instance, 0))
@@ -4330,11 +4377,6 @@
instance->skip_heartbeat_timer_del = 1;
}
- /* Adapter reset completed successfully */
- dev_warn(&instance->pdev->dev, "Reset "
- "successful for scsi%d.\n",
- instance->host->host_no);
-
if (instance->crash_dump_drv_support &&
instance->crash_dump_app_support)
megasas_set_crash_dump_params(instance,
@@ -4344,6 +4386,12 @@
MR_CRASH_BUF_TURN_OFF);
retval = SUCCESS;
+
+ /* Adapter reset completed successfully */
+ dev_warn(&instance->pdev->dev,
+ "Reset successful for scsi%d.\n",
+ instance->host->host_no);
+
goto out;
}
fail_kill_adapter:
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 18039bb..8799990 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -615,9 +615,9 @@
(event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED) ?
"start" : "stop");
if (event_data->DiscoveryStatus)
- pr_info("discovery_status(0x%08x)",
+ pr_cont(" discovery_status(0x%08x)",
le32_to_cpu(event_data->DiscoveryStatus));
- pr_info("\n");
+ pr_cont("\n");
return;
}
case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE:
@@ -3198,9 +3198,8 @@
}
if (ioc->sense) {
- pci_pool_free(ioc->sense_dma_pool, ioc->sense, ioc->sense_dma);
- if (ioc->sense_dma_pool)
- pci_pool_destroy(ioc->sense_dma_pool);
+ dma_pool_free(ioc->sense_dma_pool, ioc->sense, ioc->sense_dma);
+ dma_pool_destroy(ioc->sense_dma_pool);
dexitprintk(ioc, pr_info(MPT3SAS_FMT
"sense_pool(0x%p): free\n",
ioc->name, ioc->sense));
@@ -3208,9 +3207,8 @@
}
if (ioc->reply) {
- pci_pool_free(ioc->reply_dma_pool, ioc->reply, ioc->reply_dma);
- if (ioc->reply_dma_pool)
- pci_pool_destroy(ioc->reply_dma_pool);
+ dma_pool_free(ioc->reply_dma_pool, ioc->reply, ioc->reply_dma);
+ dma_pool_destroy(ioc->reply_dma_pool);
dexitprintk(ioc, pr_info(MPT3SAS_FMT
"reply_pool(0x%p): free\n",
ioc->name, ioc->reply));
@@ -3218,10 +3216,9 @@
}
if (ioc->reply_free) {
- pci_pool_free(ioc->reply_free_dma_pool, ioc->reply_free,
+ dma_pool_free(ioc->reply_free_dma_pool, ioc->reply_free,
ioc->reply_free_dma);
- if (ioc->reply_free_dma_pool)
- pci_pool_destroy(ioc->reply_free_dma_pool);
+ dma_pool_destroy(ioc->reply_free_dma_pool);
dexitprintk(ioc, pr_info(MPT3SAS_FMT
"reply_free_pool(0x%p): free\n",
ioc->name, ioc->reply_free));
@@ -3232,7 +3229,7 @@
do {
rps = &ioc->reply_post[i];
if (rps->reply_post_free) {
- pci_pool_free(
+ dma_pool_free(
ioc->reply_post_free_dma_pool,
rps->reply_post_free,
rps->reply_post_free_dma);
@@ -3244,8 +3241,7 @@
} while (ioc->rdpq_array_enable &&
(++i < ioc->reply_queue_count));
- if (ioc->reply_post_free_dma_pool)
- pci_pool_destroy(ioc->reply_post_free_dma_pool);
+ dma_pool_destroy(ioc->reply_post_free_dma_pool);
kfree(ioc->reply_post);
}
@@ -3266,12 +3262,11 @@
if (ioc->chain_lookup) {
for (i = 0; i < ioc->chain_depth; i++) {
if (ioc->chain_lookup[i].chain_buffer)
- pci_pool_free(ioc->chain_dma_pool,
+ dma_pool_free(ioc->chain_dma_pool,
ioc->chain_lookup[i].chain_buffer,
ioc->chain_lookup[i].chain_buffer_dma);
}
- if (ioc->chain_dma_pool)
- pci_pool_destroy(ioc->chain_dma_pool);
+ dma_pool_destroy(ioc->chain_dma_pool);
free_pages((ulong)ioc->chain_lookup, ioc->chain_pages);
ioc->chain_lookup = NULL;
}
@@ -3446,23 +3441,23 @@
ioc->name);
goto out;
}
- ioc->reply_post_free_dma_pool = pci_pool_create("reply_post_free pool",
- ioc->pdev, sz, 16, 0);
+ ioc->reply_post_free_dma_pool = dma_pool_create("reply_post_free pool",
+ &ioc->pdev->dev, sz, 16, 0);
if (!ioc->reply_post_free_dma_pool) {
pr_err(MPT3SAS_FMT
- "reply_post_free pool: pci_pool_create failed\n",
+ "reply_post_free pool: dma_pool_create failed\n",
ioc->name);
goto out;
}
i = 0;
do {
ioc->reply_post[i].reply_post_free =
- pci_pool_alloc(ioc->reply_post_free_dma_pool,
+ dma_pool_alloc(ioc->reply_post_free_dma_pool,
GFP_KERNEL,
&ioc->reply_post[i].reply_post_free_dma);
if (!ioc->reply_post[i].reply_post_free) {
pr_err(MPT3SAS_FMT
- "reply_post_free pool: pci_pool_alloc failed\n",
+ "reply_post_free pool: dma_pool_alloc failed\n",
ioc->name);
goto out;
}
@@ -3577,15 +3572,15 @@
ioc->name);
goto out;
}
- ioc->chain_dma_pool = pci_pool_create("chain pool", ioc->pdev,
+ ioc->chain_dma_pool = dma_pool_create("chain pool", &ioc->pdev->dev,
ioc->chain_segment_sz, 16, 0);
if (!ioc->chain_dma_pool) {
- pr_err(MPT3SAS_FMT "chain_dma_pool: pci_pool_create failed\n",
+ pr_err(MPT3SAS_FMT "chain_dma_pool: dma_pool_create failed\n",
ioc->name);
goto out;
}
for (i = 0; i < ioc->chain_depth; i++) {
- ioc->chain_lookup[i].chain_buffer = pci_pool_alloc(
+ ioc->chain_lookup[i].chain_buffer = dma_pool_alloc(
ioc->chain_dma_pool , GFP_KERNEL,
&ioc->chain_lookup[i].chain_buffer_dma);
if (!ioc->chain_lookup[i].chain_buffer) {
@@ -3630,17 +3625,17 @@
/* sense buffers, 4 byte align */
sz = ioc->scsiio_depth * SCSI_SENSE_BUFFERSIZE;
- ioc->sense_dma_pool = pci_pool_create("sense pool", ioc->pdev, sz, 4,
- 0);
+ ioc->sense_dma_pool = dma_pool_create("sense pool", &ioc->pdev->dev, sz,
+ 4, 0);
if (!ioc->sense_dma_pool) {
- pr_err(MPT3SAS_FMT "sense pool: pci_pool_create failed\n",
+ pr_err(MPT3SAS_FMT "sense pool: dma_pool_create failed\n",
ioc->name);
goto out;
}
- ioc->sense = pci_pool_alloc(ioc->sense_dma_pool , GFP_KERNEL,
+ ioc->sense = dma_pool_alloc(ioc->sense_dma_pool, GFP_KERNEL,
&ioc->sense_dma);
if (!ioc->sense) {
- pr_err(MPT3SAS_FMT "sense pool: pci_pool_alloc failed\n",
+ pr_err(MPT3SAS_FMT "sense pool: dma_pool_alloc failed\n",
ioc->name);
goto out;
}
@@ -3654,17 +3649,17 @@
/* reply pool, 4 byte align */
sz = ioc->reply_free_queue_depth * ioc->reply_sz;
- ioc->reply_dma_pool = pci_pool_create("reply pool", ioc->pdev, sz, 4,
- 0);
+ ioc->reply_dma_pool = dma_pool_create("reply pool", &ioc->pdev->dev, sz,
+ 4, 0);
if (!ioc->reply_dma_pool) {
- pr_err(MPT3SAS_FMT "reply pool: pci_pool_create failed\n",
+ pr_err(MPT3SAS_FMT "reply pool: dma_pool_create failed\n",
ioc->name);
goto out;
}
- ioc->reply = pci_pool_alloc(ioc->reply_dma_pool , GFP_KERNEL,
+ ioc->reply = dma_pool_alloc(ioc->reply_dma_pool, GFP_KERNEL,
&ioc->reply_dma);
if (!ioc->reply) {
- pr_err(MPT3SAS_FMT "reply pool: pci_pool_alloc failed\n",
+ pr_err(MPT3SAS_FMT "reply pool: dma_pool_alloc failed\n",
ioc->name);
goto out;
}
@@ -3680,17 +3675,17 @@
/* reply free queue, 16 byte align */
sz = ioc->reply_free_queue_depth * 4;
- ioc->reply_free_dma_pool = pci_pool_create("reply_free pool",
- ioc->pdev, sz, 16, 0);
+ ioc->reply_free_dma_pool = dma_pool_create("reply_free pool",
+ &ioc->pdev->dev, sz, 16, 0);
if (!ioc->reply_free_dma_pool) {
- pr_err(MPT3SAS_FMT "reply_free pool: pci_pool_create failed\n",
+ pr_err(MPT3SAS_FMT "reply_free pool: dma_pool_create failed\n",
ioc->name);
goto out;
}
- ioc->reply_free = pci_pool_alloc(ioc->reply_free_dma_pool , GFP_KERNEL,
+ ioc->reply_free = dma_pool_alloc(ioc->reply_free_dma_pool, GFP_KERNEL,
&ioc->reply_free_dma);
if (!ioc->reply_free) {
- pr_err(MPT3SAS_FMT "reply_free pool: pci_pool_alloc failed\n",
+ pr_err(MPT3SAS_FMT "reply_free pool: dma_pool_alloc failed\n",
ioc->name);
goto out;
}
@@ -3708,7 +3703,7 @@
ioc->config_page_sz, &ioc->config_page_dma);
if (!ioc->config_page) {
pr_err(MPT3SAS_FMT
- "config page: pci_pool_alloc failed\n",
+ "config page: dma_pool_alloc failed\n",
ioc->name);
goto out;
}
@@ -5499,10 +5494,10 @@
ioc->ctl_cmds.status = MPT3_CMD_NOT_USED;
mutex_init(&ioc->ctl_cmds.mutex);
- if (!ioc->base_cmds.reply || !ioc->transport_cmds.reply ||
- !ioc->scsih_cmds.reply || !ioc->tm_cmds.reply ||
- !ioc->config_cmds.reply || !ioc->ctl_cmds.reply ||
- !ioc->ctl_cmds.sense) {
+ if (!ioc->base_cmds.reply || !ioc->port_enable_cmds.reply ||
+ !ioc->transport_cmds.reply || !ioc->scsih_cmds.reply ||
+ !ioc->tm_cmds.reply || !ioc->config_cmds.reply ||
+ !ioc->ctl_cmds.reply || !ioc->ctl_cmds.sense) {
r = -ENOMEM;
goto out_free_resources;
}
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
index 099ab4c..a77bb7d 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -970,7 +970,7 @@
u8 id;
int cpu_count;
char name[MPT_NAME_LENGTH];
- char driver_name[MPT_NAME_LENGTH];
+ char driver_name[MPT_NAME_LENGTH - 8];
char tmp_string[MPT_STRING_LENGTH];
struct pci_dev *pdev;
Mpi2SystemInterfaceRegs_t __iomem *chip;
diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c
index e7a7a70..d3940c5 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_transport.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c
@@ -1870,6 +1870,38 @@
return rc;
}
+static int
+_transport_map_smp_buffer(struct device *dev, struct bsg_buffer *buf,
+ dma_addr_t *dma_addr, size_t *dma_len, void **p)
+{
+ /* Check if the request is split across multiple segments */
+ if (buf->sg_cnt > 1) {
+ *p = dma_alloc_coherent(dev, buf->payload_len, dma_addr,
+ GFP_KERNEL);
+ if (!*p)
+ return -ENOMEM;
+ *dma_len = buf->payload_len;
+ } else {
+ if (!dma_map_sg(dev, buf->sg_list, 1, DMA_BIDIRECTIONAL))
+ return -ENOMEM;
+ *dma_addr = sg_dma_address(buf->sg_list);
+ *dma_len = sg_dma_len(buf->sg_list);
+ *p = NULL;
+ }
+
+ return 0;
+}
+
+static void
+_transport_unmap_smp_buffer(struct device *dev, struct bsg_buffer *buf,
+ dma_addr_t dma_addr, void *p)
+{
+ if (p)
+ dma_free_coherent(dev, buf->payload_len, p, dma_addr);
+ else
+ dma_unmap_sg(dev, buf->sg_list, 1, DMA_BIDIRECTIONAL);
+}
+
/**
* _transport_smp_handler - transport portal for smp passthru
* @shost: shost object
@@ -1880,9 +1912,9 @@
* Example:
* smp_rep_general /sys/class/bsg/expander-5:0
*/
-static int
-_transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
- struct request *req)
+static void
+_transport_smp_handler(struct bsg_job *job, struct Scsi_Host *shost,
+ struct sas_rphy *rphy)
{
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
Mpi2SmpPassthroughRequest_t *mpi_request;
@@ -1891,33 +1923,25 @@
u16 smid;
u32 ioc_state;
void *psge;
- u8 issue_reset = 0;
- dma_addr_t dma_addr_in = 0;
- dma_addr_t dma_addr_out = 0;
- dma_addr_t pci_dma_in = 0;
- dma_addr_t pci_dma_out = 0;
- void *pci_addr_in = NULL;
- void *pci_addr_out = NULL;
+ dma_addr_t dma_addr_in;
+ dma_addr_t dma_addr_out;
+ void *addr_in = NULL;
+ void *addr_out = NULL;
+ size_t dma_len_in;
+ size_t dma_len_out;
u16 wait_state_count;
- struct request *rsp = req->next_rq;
- struct bio_vec bvec;
- struct bvec_iter iter;
-
- if (!rsp) {
- pr_err(MPT3SAS_FMT "%s: the smp response space is missing\n",
- ioc->name, __func__);
- return -EINVAL;
- }
+ unsigned int reslen = 0;
if (ioc->shost_recovery || ioc->pci_error_recovery) {
pr_info(MPT3SAS_FMT "%s: host reset in progress!\n",
__func__, ioc->name);
- return -EFAULT;
+ rc = -EFAULT;
+ goto out;
}
rc = mutex_lock_interruptible(&ioc->transport_cmds.mutex);
if (rc)
- return rc;
+ goto out;
if (ioc->transport_cmds.status != MPT3_CMD_NOT_USED) {
pr_err(MPT3SAS_FMT "%s: transport_cmds in use\n", ioc->name,
@@ -1927,58 +1951,20 @@
}
ioc->transport_cmds.status = MPT3_CMD_PENDING;
- /* Check if the request is split across multiple segments */
- if (bio_multiple_segments(req->bio)) {
- u32 offset = 0;
-
- /* Allocate memory and copy the request */
- pci_addr_out = pci_alloc_consistent(ioc->pdev,
- blk_rq_bytes(req), &pci_dma_out);
- if (!pci_addr_out) {
- pr_info(MPT3SAS_FMT "%s(): PCI Addr out = NULL\n",
- ioc->name, __func__);
- rc = -ENOMEM;
- goto out;
- }
-
- bio_for_each_segment(bvec, req->bio, iter) {
- memcpy(pci_addr_out + offset,
- page_address(bvec.bv_page) + bvec.bv_offset,
- bvec.bv_len);
- offset += bvec.bv_len;
- }
- } else {
- dma_addr_out = pci_map_single(ioc->pdev, bio_data(req->bio),
- blk_rq_bytes(req), PCI_DMA_BIDIRECTIONAL);
- if (pci_dma_mapping_error(ioc->pdev, dma_addr_out)) {
- pr_info(MPT3SAS_FMT "%s(): DMA Addr out = NULL\n",
- ioc->name, __func__);
- rc = -ENOMEM;
- goto free_pci;
- }
+ rc = _transport_map_smp_buffer(&ioc->pdev->dev, &job->request_payload,
+ &dma_addr_out, &dma_len_out, &addr_out);
+ if (rc)
+ goto out;
+ if (addr_out) {
+ sg_copy_to_buffer(job->request_payload.sg_list,
+ job->request_payload.sg_cnt, addr_out,
+ job->request_payload.payload_len);
}
- /* Check if the response needs to be populated across
- * multiple segments */
- if (bio_multiple_segments(rsp->bio)) {
- pci_addr_in = pci_alloc_consistent(ioc->pdev, blk_rq_bytes(rsp),
- &pci_dma_in);
- if (!pci_addr_in) {
- pr_info(MPT3SAS_FMT "%s(): PCI Addr in = NULL\n",
- ioc->name, __func__);
- rc = -ENOMEM;
- goto unmap;
- }
- } else {
- dma_addr_in = pci_map_single(ioc->pdev, bio_data(rsp->bio),
- blk_rq_bytes(rsp), PCI_DMA_BIDIRECTIONAL);
- if (pci_dma_mapping_error(ioc->pdev, dma_addr_in)) {
- pr_info(MPT3SAS_FMT "%s(): DMA Addr in = NULL\n",
- ioc->name, __func__);
- rc = -ENOMEM;
- goto unmap;
- }
- }
+ rc = _transport_map_smp_buffer(&ioc->pdev->dev, &job->reply_payload,
+ &dma_addr_in, &dma_len_in, &addr_in);
+ if (rc)
+ goto unmap_out;
wait_state_count = 0;
ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
@@ -1988,7 +1974,7 @@
"%s: failed due to ioc not operational\n",
ioc->name, __func__);
rc = -EFAULT;
- goto unmap;
+ goto unmap_in;
}
ssleep(1);
ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
@@ -2005,7 +1991,7 @@
pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
ioc->name, __func__);
rc = -EAGAIN;
- goto unmap;
+ goto unmap_in;
}
rc = 0;
@@ -2018,15 +2004,11 @@
mpi_request->SASAddress = (rphy) ?
cpu_to_le64(rphy->identify.sas_address) :
cpu_to_le64(ioc->sas_hba.sas_address);
- mpi_request->RequestDataLength = cpu_to_le16(blk_rq_bytes(req) - 4);
+ mpi_request->RequestDataLength = cpu_to_le16(dma_len_out - 4);
psge = &mpi_request->SGL;
- if (bio_multiple_segments(req->bio))
- ioc->build_sg(ioc, psge, pci_dma_out, (blk_rq_bytes(req) - 4),
- pci_dma_in, (blk_rq_bytes(rsp) + 4));
- else
- ioc->build_sg(ioc, psge, dma_addr_out, (blk_rq_bytes(req) - 4),
- dma_addr_in, (blk_rq_bytes(rsp) + 4));
+ ioc->build_sg(ioc, psge, dma_addr_out, dma_len_out - 4, dma_addr_in,
+ dma_len_in - 4);
dtransportprintk(ioc, pr_info(MPT3SAS_FMT
"%s - sending smp request\n", ioc->name, __func__));
@@ -2040,83 +2022,51 @@
__func__, ioc->name);
_debug_dump_mf(mpi_request,
sizeof(Mpi2SmpPassthroughRequest_t)/4);
- if (!(ioc->transport_cmds.status & MPT3_CMD_RESET))
- issue_reset = 1;
- goto issue_host_reset;
+ if (!(ioc->transport_cmds.status & MPT3_CMD_RESET)) {
+ mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
+ rc = -ETIMEDOUT;
+ goto unmap_in;
+ }
}
dtransportprintk(ioc, pr_info(MPT3SAS_FMT
"%s - complete\n", ioc->name, __func__));
- if (ioc->transport_cmds.status & MPT3_CMD_REPLY_VALID) {
-
- mpi_reply = ioc->transport_cmds.reply;
-
- dtransportprintk(ioc, pr_info(MPT3SAS_FMT
- "%s - reply data transfer size(%d)\n",
- ioc->name, __func__,
- le16_to_cpu(mpi_reply->ResponseDataLength)));
-
- memcpy(scsi_req(req)->sense, mpi_reply, sizeof(*mpi_reply));
- scsi_req(req)->sense_len = sizeof(*mpi_reply);
- scsi_req(req)->resid_len = 0;
- scsi_req(rsp)->resid_len -=
- le16_to_cpu(mpi_reply->ResponseDataLength);
-
- /* check if the resp needs to be copied from the allocated
- * pci mem */
- if (bio_multiple_segments(rsp->bio)) {
- u32 offset = 0;
- u32 bytes_to_copy =
- le16_to_cpu(mpi_reply->ResponseDataLength);
- bio_for_each_segment(bvec, rsp->bio, iter) {
- if (bytes_to_copy <= bvec.bv_len) {
- memcpy(page_address(bvec.bv_page) +
- bvec.bv_offset, pci_addr_in +
- offset, bytes_to_copy);
- break;
- } else {
- memcpy(page_address(bvec.bv_page) +
- bvec.bv_offset, pci_addr_in +
- offset, bvec.bv_len);
- bytes_to_copy -= bvec.bv_len;
- }
- offset += bvec.bv_len;
- }
- }
- } else {
+ if (!(ioc->transport_cmds.status & MPT3_CMD_REPLY_VALID)) {
dtransportprintk(ioc, pr_info(MPT3SAS_FMT
"%s - no reply\n", ioc->name, __func__));
rc = -ENXIO;
+ goto unmap_in;
}
- issue_host_reset:
- if (issue_reset) {
- mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
- rc = -ETIMEDOUT;
+ mpi_reply = ioc->transport_cmds.reply;
+
+ dtransportprintk(ioc,
+ pr_info(MPT3SAS_FMT "%s - reply data transfer size(%d)\n",
+ ioc->name, __func__,
+ le16_to_cpu(mpi_reply->ResponseDataLength)));
+
+ memcpy(job->reply, mpi_reply, sizeof(*mpi_reply));
+ job->reply_len = sizeof(*mpi_reply);
+ reslen = le16_to_cpu(mpi_reply->ResponseDataLength);
+
+ if (addr_in) {
+ sg_copy_to_buffer(job->reply_payload.sg_list,
+ job->reply_payload.sg_cnt, addr_in,
+ job->reply_payload.payload_len);
}
- unmap:
- if (dma_addr_out)
- pci_unmap_single(ioc->pdev, dma_addr_out, blk_rq_bytes(req),
- PCI_DMA_BIDIRECTIONAL);
- if (dma_addr_in)
- pci_unmap_single(ioc->pdev, dma_addr_in, blk_rq_bytes(rsp),
- PCI_DMA_BIDIRECTIONAL);
-
- free_pci:
- if (pci_addr_out)
- pci_free_consistent(ioc->pdev, blk_rq_bytes(req), pci_addr_out,
- pci_dma_out);
-
- if (pci_addr_in)
- pci_free_consistent(ioc->pdev, blk_rq_bytes(rsp), pci_addr_in,
- pci_dma_in);
-
+ rc = 0;
+ unmap_in:
+ _transport_unmap_smp_buffer(&ioc->pdev->dev, &job->reply_payload,
+ dma_addr_in, addr_in);
+ unmap_out:
+ _transport_unmap_smp_buffer(&ioc->pdev->dev, &job->request_payload,
+ dma_addr_out, addr_out);
out:
ioc->transport_cmds.status = MPT3_CMD_NOT_USED;
mutex_unlock(&ioc->transport_cmds.mutex);
- return rc;
+ bsg_job_done(job, rc, reslen);
}
struct sas_function_template mpt3sas_transport_functions = {
diff --git a/drivers/scsi/mvme147.c b/drivers/scsi/mvme147.c
index e7f6661..4f51570 100644
--- a/drivers/scsi/mvme147.c
+++ b/drivers/scsi/mvme147.c
@@ -121,21 +121,6 @@
return 0;
}
-static int mvme147_bus_reset(struct scsi_cmnd *cmd)
-{
- /* FIXME perform bus-specific reset */
-
- /* FIXME 2: kill this function, and let midlayer fallback to
- the same result, calling wd33c93_host_reset() */
-
- spin_lock_irq(cmd->device->host->host_lock);
- wd33c93_host_reset(cmd);
- spin_unlock_irq(cmd->device->host->host_lock);
-
- return SUCCESS;
-}
-
-
static struct scsi_host_template driver_template = {
.proc_name = "MVME147",
.name = "MVME147 built-in SCSI",
@@ -143,7 +128,6 @@
.release = mvme147_release,
.queuecommand = wd33c93_queuecommand,
.eh_abort_handler = wd33c93_abort,
- .eh_bus_reset_handler = mvme147_bus_reset,
.eh_host_reset_handler = wd33c93_host_reset,
.can_queue = CAN_QUEUE,
.this_id = 7,
diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
index 4e047b5..718c88d 100644
--- a/drivers/scsi/mvsas/mv_init.c
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -61,7 +61,7 @@
.max_sectors = SCSI_DEFAULT_MAX_SECTORS,
.use_clustering = ENABLE_CLUSTERING,
.eh_device_reset_handler = sas_eh_device_reset_handler,
- .eh_bus_reset_handler = sas_eh_bus_reset_handler,
+ .eh_target_reset_handler = sas_eh_target_reset_handler,
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
.shost_attrs = mvst_host_attrs,
@@ -125,8 +125,7 @@
else
slot_nr = MVS_CHIP_SLOT_SZ;
- if (mvi->dma_pool)
- pci_pool_destroy(mvi->dma_pool);
+ dma_pool_destroy(mvi->dma_pool);
if (mvi->tx)
dma_free_coherent(mvi->dev,
@@ -296,7 +295,8 @@
goto err_out;
sprintf(pool_name, "%s%d", "mvs_dma_pool", mvi->id);
- mvi->dma_pool = pci_pool_create(pool_name, mvi->pdev, MVS_SLOT_BUF_SZ, 16, 0);
+ mvi->dma_pool = dma_pool_create(pool_name, &mvi->pdev->dev,
+ MVS_SLOT_BUF_SZ, 16, 0);
if (!mvi->dma_pool) {
printk(KERN_DEBUG "failed to create dma pool %s.\n", pool_name);
goto err_out;
@@ -557,14 +557,14 @@
SHOST_TO_SAS_HA(shost) =
kcalloc(1, sizeof(struct sas_ha_struct), GFP_KERNEL);
if (!SHOST_TO_SAS_HA(shost)) {
- kfree(shost);
+ scsi_host_put(shost);
rc = -ENOMEM;
goto err_out_regions;
}
rc = mvs_prep_sas_ha_init(shost, chip);
if (rc) {
- kfree(shost);
+ scsi_host_put(shost);
rc = -ENOMEM;
goto err_out_regions;
}
diff --git a/drivers/scsi/mvsas/mv_sas.c b/drivers/scsi/mvsas/mv_sas.c
index c7cc803..ee81d10 100644
--- a/drivers/scsi/mvsas/mv_sas.c
+++ b/drivers/scsi/mvsas/mv_sas.c
@@ -790,7 +790,7 @@
slot->n_elem = n_elem;
slot->slot_tag = tag;
- slot->buf = pci_pool_alloc(mvi->dma_pool, GFP_ATOMIC, &slot->buf_dma);
+ slot->buf = dma_pool_alloc(mvi->dma_pool, GFP_ATOMIC, &slot->buf_dma);
if (!slot->buf) {
rc = -ENOMEM;
goto err_out_tag;
@@ -840,7 +840,7 @@
return rc;
err_out_slot_buf:
- pci_pool_free(mvi->dma_pool, slot->buf, slot->buf_dma);
+ dma_pool_free(mvi->dma_pool, slot->buf, slot->buf_dma);
err_out_tag:
mvs_tag_free(mvi, tag);
err_out:
@@ -918,7 +918,7 @@
}
if (slot->buf) {
- pci_pool_free(mvi->dma_pool, slot->buf, slot->buf_dma);
+ dma_pool_free(mvi->dma_pool, slot->buf, slot->buf_dma);
slot->buf = NULL;
}
list_del_init(&slot->entry);
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index 53c8477..107e191 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -201,7 +201,6 @@
/* SCSI error handler */
static int nsp32_eh_abort (struct scsi_cmnd *);
-static int nsp32_eh_bus_reset (struct scsi_cmnd *);
static int nsp32_eh_host_reset(struct scsi_cmnd *);
/* generate SCSI message */
@@ -276,8 +275,7 @@
.max_sectors = 128,
.this_id = NSP32_HOST_SCSIID,
.use_clustering = DISABLE_CLUSTERING,
- .eh_abort_handler = nsp32_eh_abort,
- .eh_bus_reset_handler = nsp32_eh_bus_reset,
+ .eh_abort_handler = nsp32_eh_abort,
.eh_host_reset_handler = nsp32_eh_host_reset,
/* .highmem_io = 1, */
};
@@ -2845,24 +2843,6 @@
return SUCCESS;
}
-static int nsp32_eh_bus_reset(struct scsi_cmnd *SCpnt)
-{
- nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
- unsigned int base = SCpnt->device->host->io_port;
-
- spin_lock_irq(SCpnt->device->host->host_lock);
-
- nsp32_msg(KERN_INFO, "Bus Reset");
- nsp32_dbg(NSP32_DEBUG_BUSRESET, "SCpnt=0x%x", SCpnt);
-
- nsp32_write2(base, IRQ_CONTROL, IRQ_CONTROL_ALL_IRQ_MASK);
- nsp32_do_bus_reset(data);
- nsp32_write2(base, IRQ_CONTROL, 0);
-
- spin_unlock_irq(SCpnt->device->host->host_lock);
- return SUCCESS; /* SCSI bus reset is succeeded at any time. */
-}
-
static void nsp32_do_bus_reset(nsp32_hw_data *data)
{
unsigned int base = data->BaseAddress;
diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c
index 929ee7e..20ec1c0 100644
--- a/drivers/scsi/osst.c
+++ b/drivers/scsi/osst.c
@@ -619,7 +619,7 @@
os_aux_t * aux = STp->buffer->aux;
os_partition_t * par = &(aux->partition);
struct st_partstat * STps = &(STp->ps[STp->partition]);
- int blk_cnt, blk_sz, i;
+ unsigned int blk_cnt, blk_sz, i;
if (STp->raw) {
if (STp->buffer->syscall_result) {
@@ -5434,7 +5434,7 @@
for (i=0, offset=st_bp->buffer_bytes;
i < st_bp->sg_segs && offset >= st_bp->sg[i].length; i++)
- offset -= st_bp->sg[i].length;
+ offset -= st_bp->sg[i].length;
if (i == st_bp->sg_segs) { /* Should never happen */
printk(KERN_WARNING "osst :A: Append_to_buffer offset overflow.\n");
return (-EIO);
@@ -5667,12 +5667,12 @@
* sysfs support for osst driver parameter information
*/
-static ssize_t osst_version_show(struct device_driver *ddd, char *buf)
+static ssize_t version_show(struct device_driver *ddd, char *buf)
{
return snprintf(buf, PAGE_SIZE, "%s\n", osst_version);
}
-static DRIVER_ATTR(version, S_IRUGO, osst_version_show, NULL);
+static DRIVER_ATTR_RO(version);
static int osst_create_sysfs_files(struct device_driver *sysfs)
{
diff --git a/drivers/scsi/pcmcia/fdomain_stub.c b/drivers/scsi/pcmcia/fdomain_stub.c
index 714b248..953a792 100644
--- a/drivers/scsi/pcmcia/fdomain_stub.c
+++ b/drivers/scsi/pcmcia/fdomain_stub.c
@@ -173,7 +173,7 @@
static int fdomain_resume(struct pcmcia_device *link)
{
- fdomain_16x0_bus_reset(NULL);
+ fdomain_16x0_host_reset(NULL);
return 0;
}
diff --git a/drivers/scsi/pcmcia/qlogic_stub.c b/drivers/scsi/pcmcia/qlogic_stub.c
index c670dc7..0556054 100644
--- a/drivers/scsi/pcmcia/qlogic_stub.c
+++ b/drivers/scsi/pcmcia/qlogic_stub.c
@@ -67,7 +67,7 @@
.info = qlogicfas408_info,
.queuecommand = qlogicfas408_queuecommand,
.eh_abort_handler = qlogicfas408_abort,
- .eh_bus_reset_handler = qlogicfas408_bus_reset,
+ .eh_host_reset_handler = qlogicfas408_host_reset,
.bios_param = qlogicfas408_biosparam,
.can_queue = 1,
.this_id = -1,
@@ -264,7 +264,7 @@
outb(0x04, link->resource[0]->start + 0xd);
}
/* Ugggglllyyyy!!! */
- qlogicfas408_bus_reset(NULL);
+ qlogicfas408_host_reset(NULL);
return 0;
}
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index 034b2f7..0e013f7 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -86,7 +86,7 @@
.max_sectors = SCSI_DEFAULT_MAX_SECTORS,
.use_clustering = ENABLE_CLUSTERING,
.eh_device_reset_handler = sas_eh_device_reset_handler,
- .eh_bus_reset_handler = sas_eh_bus_reset_handler,
+ .eh_target_reset_handler = sas_eh_target_reset_handler,
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
.shost_attrs = pm8001_host_attrs,
@@ -160,8 +160,6 @@
}
}
PM8001_CHIP_DISP->chip_iounmap(pm8001_ha);
- if (pm8001_ha->shost)
- scsi_host_put(pm8001_ha->shost);
flush_workqueue(pm8001_wq);
kfree(pm8001_ha->tags);
kfree(pm8001_ha);
@@ -1073,7 +1071,7 @@
err_out_free:
kfree(SHOST_TO_SAS_HA(shost));
err_out_free_host:
- kfree(shost);
+ scsi_host_put(shost);
err_out_regions:
pci_release_regions(pdev);
err_out_disable:
@@ -1112,6 +1110,7 @@
for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
tasklet_kill(&pm8001_ha->tasklet[j]);
#endif
+ scsi_host_put(pm8001_ha->shost);
pm8001_free(pm8001_ha);
kfree(sha->sas_phy);
kfree(sha->sas_port);
diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c
index 1cc814f..b4d6cd8 100644
--- a/drivers/scsi/pmcraid.c
+++ b/drivers/scsi/pmcraid.c
@@ -1595,12 +1595,7 @@
if (pinstance->ccn.hcam->notification_type ==
NOTIFICATION_TYPE_ENTRY_CHANGED &&
cfg_entry->resource_type == RES_TYPE_VSET) {
-
- if (fw_version <= PMCRAID_FW_VERSION_1)
- hidden_entry = (cfg_entry->unique_flags1 & 0x80) != 0;
- else
- hidden_entry = (cfg_entry->unique_flags1 & 0x80) != 0;
-
+ hidden_entry = (cfg_entry->unique_flags1 & 0x80) != 0;
} else if (!pmcraid_expose_resource(fw_version, cfg_entry)) {
goto out_notify_apps;
}
@@ -4655,13 +4650,13 @@
return;
for (i = 0; i < max_index; i++) {
- pci_pool_free(pinstance->control_pool,
+ dma_pool_free(pinstance->control_pool,
pinstance->cmd_list[i]->ioa_cb,
pinstance->cmd_list[i]->ioa_cb_bus_addr);
pinstance->cmd_list[i]->ioa_cb = NULL;
pinstance->cmd_list[i]->ioa_cb_bus_addr = 0;
}
- pci_pool_destroy(pinstance->control_pool);
+ dma_pool_destroy(pinstance->control_pool);
pinstance->control_pool = NULL;
}
@@ -4718,8 +4713,8 @@
pinstance->host->unique_id);
pinstance->control_pool =
- pci_pool_create(pinstance->ctl_pool_name,
- pinstance->pdev,
+ dma_pool_create(pinstance->ctl_pool_name,
+ &pinstance->pdev->dev,
sizeof(struct pmcraid_control_block),
PMCRAID_IOARCB_ALIGNMENT, 0);
@@ -4728,7 +4723,7 @@
for (i = 0; i < PMCRAID_MAX_CMD; i++) {
pinstance->cmd_list[i]->ioa_cb =
- pci_pool_alloc(
+ dma_pool_alloc(
pinstance->control_pool,
GFP_KERNEL,
&(pinstance->cmd_list[i]->ioa_cb_bus_addr));
diff --git a/drivers/scsi/pmcraid.h b/drivers/scsi/pmcraid.h
index 01eb2bc..8bfac72 100644
--- a/drivers/scsi/pmcraid.h
+++ b/drivers/scsi/pmcraid.h
@@ -755,7 +755,7 @@
/* structures related to command blocks */
struct kmem_cache *cmd_cachep; /* cache for cmd blocks */
- struct pci_pool *control_pool; /* pool for control blocks */
+ struct dma_pool *control_pool; /* pool for control blocks */
char cmd_pool_name[64]; /* name of cmd cache */
char ctl_pool_name[64]; /* name of control cache */
diff --git a/drivers/scsi/ppa.c b/drivers/scsi/ppa.c
index f6ad579..7be5823 100644
--- a/drivers/scsi/ppa.c
+++ b/drivers/scsi/ppa.c
@@ -970,7 +970,6 @@
.name = "Iomega VPI0 (ppa) interface",
.queuecommand = ppa_queuecommand,
.eh_abort_handler = ppa_abort,
- .eh_bus_reset_handler = ppa_reset,
.eh_host_reset_handler = ppa_reset,
.bios_param = ppa_biosparam,
.this_id = -1,
diff --git a/drivers/scsi/qedf/qedf.h b/drivers/scsi/qedf/qedf.h
index 351f06d..9bf7b22 100644
--- a/drivers/scsi/qedf/qedf.h
+++ b/drivers/scsi/qedf/qedf.h
@@ -300,7 +300,6 @@
#define QEDF_FALLBACK_VLAN 1002
#define QEDF_DEFAULT_PRIO 3
int vlan_id;
- uint vlan_hw_insert:1;
struct qed_dev *cdev;
struct qed_dev_fcoe_info dev_info;
struct qed_int_info int_info;
@@ -443,7 +442,6 @@
extern int qedf_queuecommand(struct Scsi_Host *host,
struct scsi_cmnd *sc_cmd);
extern void qedf_fip_send(struct fcoe_ctlr *fip, struct sk_buff *skb);
-extern void qedf_update_src_mac(struct fc_lport *lport, u8 *addr);
extern u8 *qedf_get_src_mac(struct fc_lport *lport);
extern void qedf_fip_recv(struct qedf_ctx *qedf, struct sk_buff *skb);
extern void qedf_fcoe_send_vlan_req(struct qedf_ctx *qedf);
diff --git a/drivers/scsi/qedf/qedf_fip.c b/drivers/scsi/qedf/qedf_fip.c
index aefd24c..773558f 100644
--- a/drivers/scsi/qedf/qedf_fip.c
+++ b/drivers/scsi/qedf/qedf_fip.c
@@ -108,7 +108,6 @@
{
struct qedf_ctx *qedf = container_of(fip, struct qedf_ctx, ctlr);
struct ethhdr *eth_hdr;
- struct vlan_ethhdr *vlan_hdr;
struct fip_header *fiph;
u16 op, vlan_tci = 0;
u8 sub;
@@ -124,16 +123,14 @@
op = ntohs(fiph->fip_op);
sub = fiph->fip_subcode;
- if (!qedf->vlan_hw_insert) {
- vlan_hdr = skb_push(skb, sizeof(*vlan_hdr) - sizeof(*eth_hdr));
- memcpy(vlan_hdr, eth_hdr, 2 * ETH_ALEN);
- vlan_hdr->h_vlan_proto = htons(ETH_P_8021Q);
- vlan_hdr->h_vlan_encapsulated_proto = eth_hdr->h_proto;
- vlan_hdr->h_vlan_TCI = vlan_tci = htons(qedf->vlan_id);
- }
+ /*
+ * Add VLAN tag to non-offload FIP frame based on current stored VLAN
+ * for FIP/FCoE traffic.
+ */
+ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), qedf->vlan_id);
- /* Update eth_hdr since we added a VLAN tag */
- eth_hdr = (struct ethhdr *)skb_mac_header(skb);
+ /* Get VLAN ID from skb for printing purposes */
+ __vlan_hwaccel_get_tag(skb, &vlan_tci);
QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_LL2, "FIP frame send: "
"dest=%pM op=%x sub=%x vlan=%04x.", eth_hdr->h_dest, op, sub,
@@ -174,7 +171,6 @@
/* Handle FIP VLAN resp in the driver */
if (op == FIP_OP_VLAN && sub == FIP_SC_VL_NOTE) {
qedf_fcoe_process_vlan_resp(qedf, skb);
- qedf->vlan_hw_insert = 0;
kfree_skb(skb);
} else if (op == FIP_OP_CTRL && sub == FIP_SC_CLR_VLINK) {
QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC, "Clear virtual "
@@ -242,26 +238,9 @@
}
}
-void qedf_update_src_mac(struct fc_lport *lport, u8 *addr)
-{
- struct qedf_ctx *qedf = lport_priv(lport);
-
- QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC,
- "Setting data_src_addr=%pM.\n", addr);
- ether_addr_copy(qedf->data_src_addr, addr);
-}
-
u8 *qedf_get_src_mac(struct fc_lport *lport)
{
- u8 mac[ETH_ALEN];
- u8 port_id[3];
struct qedf_ctx *qedf = lport_priv(lport);
- /* We need to use the lport port_id to create the data_src_addr */
- if (is_zero_ether_addr(qedf->data_src_addr)) {
- hton24(port_id, lport->port_id);
- fc_fcoe_set_mac(mac, port_id);
- qedf->ctlr.update_mac(lport, mac);
- }
return qedf->data_src_addr;
}
diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c
index 1d13c9c..7c00645 100644
--- a/drivers/scsi/qedf/qedf_main.c
+++ b/drivers/scsi/qedf/qedf_main.c
@@ -18,6 +18,7 @@
#include <linux/kthread.h>
#include <scsi/libfc.h>
#include <scsi/scsi_host.h>
+#include <scsi/fc_frame.h>
#include <linux/if_ether.h>
#include <linux/if_vlan.h>
#include <linux/cpu.h>
@@ -42,7 +43,7 @@
uint qedf_debug = QEDF_LOG_INFO;
module_param_named(debug, qedf_debug, uint, S_IRUGO);
-MODULE_PARM_DESC(qedf_debug, " Debug mask. Pass '1' to enable default debugging"
+MODULE_PARM_DESC(debug, " Debug mask. Pass '1' to enable default debugging"
" mask");
static uint qedf_fipvlan_retries = 30;
@@ -163,7 +164,7 @@
QEDF_WARN(&(qedf->dbg_ctx), "Did not receive FIP VLAN "
"response, falling back to default VLAN %d.\n",
qedf_fallback_vlan);
- qedf_set_vlan_id(qedf, QEDF_FALLBACK_VLAN);
+ qedf_set_vlan_id(qedf, qedf_fallback_vlan);
/*
* Zero out data_src_addr so we'll update it with the new
@@ -187,6 +188,50 @@
}
}
+#define QEDF_FCOE_MAC_METHOD_GRANGED_MAC 1
+#define QEDF_FCOE_MAC_METHOD_FCF_MAP 2
+#define QEDF_FCOE_MAC_METHOD_FCOE_SET_MAC 3
+static void qedf_set_data_src_addr(struct qedf_ctx *qedf, struct fc_frame *fp)
+{
+ u8 *granted_mac;
+ struct fc_frame_header *fh = fc_frame_header_get(fp);
+ u8 fc_map[3];
+ int method = 0;
+
+ /* Get granted MAC address from FIP FLOGI payload */
+ granted_mac = fr_cb(fp)->granted_mac;
+
+ /*
+ * We set the source MAC for FCoE traffic based on the Granted MAC
+ * address from the switch.
+ *
+ * If granted_mac is non-zero, we used that.
+ * If the granted_mac is zeroed out, created the FCoE MAC based on
+ * the sel_fcf->fc_map and the d_id fo the FLOGI frame.
+ * If sel_fcf->fc_map is 0 then we use the default FCF-MAC plus the
+ * d_id of the FLOGI frame.
+ */
+ if (!is_zero_ether_addr(granted_mac)) {
+ ether_addr_copy(qedf->data_src_addr, granted_mac);
+ method = QEDF_FCOE_MAC_METHOD_GRANGED_MAC;
+ } else if (qedf->ctlr.sel_fcf->fc_map != 0) {
+ hton24(fc_map, qedf->ctlr.sel_fcf->fc_map);
+ qedf->data_src_addr[0] = fc_map[0];
+ qedf->data_src_addr[1] = fc_map[1];
+ qedf->data_src_addr[2] = fc_map[2];
+ qedf->data_src_addr[3] = fh->fh_d_id[0];
+ qedf->data_src_addr[4] = fh->fh_d_id[1];
+ qedf->data_src_addr[5] = fh->fh_d_id[2];
+ method = QEDF_FCOE_MAC_METHOD_FCF_MAP;
+ } else {
+ fc_fcoe_set_mac(qedf->data_src_addr, fh->fh_d_id);
+ method = QEDF_FCOE_MAC_METHOD_FCOE_SET_MAC;
+ }
+
+ QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC,
+ "QEDF data_src_mac=%pM method=%d.\n", qedf->data_src_addr, method);
+}
+
static void qedf_flogi_resp(struct fc_seq *seq, struct fc_frame *fp,
void *arg)
{
@@ -212,6 +257,10 @@
/* Log stats for FLOGI reject */
if (fc_frame_payload_op(fp) == ELS_LS_RJT)
qedf->flogi_failed++;
+ else if (fc_frame_payload_op(fp) == ELS_LS_ACC) {
+ /* Set the source MAC we will use for FCoE traffic */
+ qedf_set_data_src_addr(qedf, fp);
+ }
/* Complete flogi_compl so we can proceed to sending ADISCs */
complete(&qedf->flogi_compl);
@@ -312,8 +361,9 @@
/* Since the link when down and up to verify which vlan we're on */
qedf->fipvlan_retries = qedf_fipvlan_retries;
rc = qedf_initiate_fipvlan_req(qedf);
+ /* If getting the VLAN fails, set the VLAN to the fallback one */
if (!rc)
- return;
+ qedf_set_vlan_id(qedf, qedf_fallback_vlan);
/*
* We need to wait for an FCF to be selected due to the
@@ -629,16 +679,6 @@
return qedf_initiate_tmf(sc_cmd, FCP_TMF_LUN_RESET);
}
-static int qedf_eh_bus_reset(struct scsi_cmnd *sc_cmd)
-{
- QEDF_ERR(NULL, "BUS RESET Issued...\n");
- /*
- * Essentially a no-op but return SUCCESS to prevent
- * unnecessary escalation to the host reset handler.
- */
- return SUCCESS;
-}
-
void qedf_wait_for_upload(struct qedf_ctx *qedf)
{
while (1) {
@@ -716,7 +756,6 @@
.eh_abort_handler = qedf_eh_abort,
.eh_device_reset_handler = qedf_eh_device_reset, /* lun reset */
.eh_target_reset_handler = qedf_eh_target_reset, /* target reset */
- .eh_bus_reset_handler = qedf_eh_bus_reset,
.eh_host_reset_handler = qedf_eh_host_reset,
.slave_configure = qedf_slave_configure,
.dma_boundary = QED_HW_DMA_BOUNDARY,
@@ -915,6 +954,10 @@
skb->mac_len = elen;
skb->protocol = htons(ETH_P_FCOE);
+ /*
+ * Add VLAN tag to non-offload FCoE frame based on current stored VLAN
+ * for FIP/FCoE traffic.
+ */
__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), qedf->vlan_id);
/* fill up mac and fcoe headers */
@@ -927,7 +970,7 @@
ether_addr_copy(eh->h_dest, qedf->ctlr.dest_addr);
/* Set the source MAC address */
- fc_fcoe_set_mac(eh->h_source, fh->fh_s_id);
+ ether_addr_copy(eh->h_source, qedf->data_src_addr);
hp = (struct fcoe_hdr *)(eh + 1);
memset(hp, 0, sizeof(*hp));
@@ -1025,7 +1068,6 @@
{
struct qed_fcoe_params_offload conn_info;
u32 port_id;
- u8 lport_src_id[3];
int rval;
uint16_t total_sqe = (fcport->sq_mem_size / sizeof(struct fcoe_wqe));
@@ -1054,11 +1096,7 @@
(dma_addr_t)(*(u64 *)(fcport->sq_pbl + 8));
/* Need to use our FCoE MAC for the offload session */
- port_id = fc_host_port_id(qedf->lport->host);
- lport_src_id[2] = (port_id & 0x000000FF);
- lport_src_id[1] = (port_id & 0x0000FF00) >> 8;
- lport_src_id[0] = (port_id & 0x00FF0000) >> 16;
- fc_fcoe_set_mac(conn_info.src_mac, lport_src_id);
+ ether_addr_copy(conn_info.src_mac, qedf->data_src_addr);
ether_addr_copy(conn_info.dst_mac, qedf->ctlr.dest_addr);
@@ -1347,7 +1385,6 @@
fcoe_ctlr_init(&qedf->ctlr, FIP_ST_AUTO);
qedf->ctlr.send = qedf_fip_send;
- qedf->ctlr.update_mac = qedf_update_src_mac;
qedf->ctlr.get_src_addr = qedf_get_src_mac;
ether_addr_copy(qedf->ctlr.ctl_src_addr, qedf->mac);
}
@@ -2939,7 +2976,7 @@
sprintf(host_buf, "qedf_%u_link",
qedf->lport->host->host_no);
- qedf->link_update_wq = create_singlethread_workqueue(host_buf);
+ qedf->link_update_wq = create_workqueue(host_buf);
INIT_DELAYED_WORK(&qedf->link_update, qedf_handle_link_update);
INIT_DELAYED_WORK(&qedf->link_recovery, qedf_link_recovery);
@@ -3056,9 +3093,24 @@
QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC, "MAC address is %pM.\n",
qedf->mac);
- /* Set the WWNN and WWPN based on the MAC address */
- qedf->wwnn = fcoe_wwn_from_mac(qedf->mac, 1, 0);
- qedf->wwpn = fcoe_wwn_from_mac(qedf->mac, 2, 0);
+ /*
+ * Set the WWNN and WWPN in the following way:
+ *
+ * If the info we get from qed is non-zero then use that to set the
+ * WWPN and WWNN. Otherwise fall back to use fcoe_wwn_from_mac() based
+ * on the MAC address.
+ */
+ if (qedf->dev_info.wwnn != 0 && qedf->dev_info.wwpn != 0) {
+ QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC,
+ "Setting WWPN and WWNN from qed dev_info.\n");
+ qedf->wwnn = qedf->dev_info.wwnn;
+ qedf->wwpn = qedf->dev_info.wwpn;
+ } else {
+ QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC,
+ "Setting WWPN and WWNN using fcoe_wwn_from_mac().\n");
+ qedf->wwnn = fcoe_wwn_from_mac(qedf->mac, 1, 0);
+ qedf->wwpn = fcoe_wwn_from_mac(qedf->mac, 2, 0);
+ }
QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC, "WWNN=%016llx "
"WWPN=%016llx.\n", qedf->wwnn, qedf->wwpn);
@@ -3094,7 +3146,7 @@
/* Start LL2 processing thread */
snprintf(host_buf, 20, "qedf_%d_ll2", host->host_no);
qedf->ll2_recv_wq =
- create_singlethread_workqueue(host_buf);
+ create_workqueue(host_buf);
if (!qedf->ll2_recv_wq) {
QEDF_ERR(&(qedf->dbg_ctx), "Failed to LL2 workqueue.\n");
goto err7;
@@ -3114,8 +3166,7 @@
}
set_bit(QEDF_LL2_STARTED, &qedf->flags);
- /* hw will be insterting vlan tag*/
- qedf->vlan_hw_insert = 1;
+ /* Set initial FIP/FCoE VLAN to NULL */
qedf->vlan_id = 0;
/*
@@ -3137,7 +3188,7 @@
sprintf(host_buf, "qedf_%u_timer", qedf->lport->host->host_no);
qedf->timer_work_queue =
- create_singlethread_workqueue(host_buf);
+ create_workqueue(host_buf);
if (!qedf->timer_work_queue) {
QEDF_ERR(&(qedf->dbg_ctx), "Failed to start timer "
"workqueue.\n");
@@ -3148,7 +3199,7 @@
if (mode != QEDF_MODE_RECOVERY) {
sprintf(host_buf, "qedf_%u_dpc",
qedf->lport->host->host_no);
- qedf->dpc_wq = create_singlethread_workqueue(host_buf);
+ qedf->dpc_wq = create_workqueue(host_buf);
}
/*
diff --git a/drivers/scsi/qedf/qedf_version.h b/drivers/scsi/qedf/qedf_version.h
index 6fa4420..397b3b8 100644
--- a/drivers/scsi/qedf/qedf_version.h
+++ b/drivers/scsi/qedf/qedf_version.h
@@ -7,9 +7,9 @@
* this source tree.
*/
-#define QEDF_VERSION "8.18.22.0"
+#define QEDF_VERSION "8.20.5.0"
#define QEDF_DRIVER_MAJOR_VER 8
-#define QEDF_DRIVER_MINOR_VER 18
-#define QEDF_DRIVER_REV_VER 22
+#define QEDF_DRIVER_MINOR_VER 20
+#define QEDF_DRIVER_REV_VER 5
#define QEDF_DRIVER_ENG_VER 0
diff --git a/drivers/scsi/qedi/qedi.h b/drivers/scsi/qedi/qedi.h
index 91d2f51..b8b22ce 100644
--- a/drivers/scsi/qedi/qedi.h
+++ b/drivers/scsi/qedi/qedi.h
@@ -54,8 +54,8 @@
/* MAX Length for cached SGL */
#define MAX_SGLEN_FOR_CACHESGL ((1U << 16) - 1)
-#define MAX_NUM_MSIX_PF 8
-#define MIN_NUM_CPUS_MSIX(x) min((x)->msix_count, num_online_cpus())
+#define MIN_NUM_CPUS_MSIX(x) min_t(u32, x->dev_info.num_cqs, \
+ num_online_cpus())
#define QEDI_LOCAL_PORT_MIN 60000
#define QEDI_LOCAL_PORT_MAX 61024
@@ -301,7 +301,6 @@
u16 bdq_prod_idx;
u16 rq_num_entries;
- u32 msix_count;
u32 max_sqes;
u8 num_queues;
u32 max_active_conns;
diff --git a/drivers/scsi/qedi/qedi_iscsi.c b/drivers/scsi/qedi/qedi_iscsi.c
index 37da9a8..a02b34e 100644
--- a/drivers/scsi/qedi/qedi_iscsi.c
+++ b/drivers/scsi/qedi/qedi_iscsi.c
@@ -534,7 +534,7 @@
SET_FIELD(conn_info->tcp_flags, TCP_OFFLOAD_PARAMS_DA_CNT_EN, 1);
SET_FIELD(conn_info->tcp_flags, TCP_OFFLOAD_PARAMS_KA_EN, 1);
- conn_info->default_cq = (qedi_ep->fw_cid % 8);
+ conn_info->default_cq = (qedi_ep->fw_cid % qedi->num_queues);
conn_info->ka_max_probe_cnt = DEF_KA_MAX_PROBE_COUNT;
conn_info->dup_ack_theshold = 3;
diff --git a/drivers/scsi/qedi/qedi_main.c b/drivers/scsi/qedi/qedi_main.c
index 85e7bae..cccc34a 100644
--- a/drivers/scsi/qedi/qedi_main.c
+++ b/drivers/scsi/qedi/qedi_main.c
@@ -794,13 +794,14 @@
u32 log_page_size;
int rval = 0;
- QEDI_INFO(&qedi->dbg_ctx, QEDI_LOG_DISC, "Min number of MSIX %d\n",
- MIN_NUM_CPUS_MSIX(qedi));
num_sq_pages = (MAX_OUSTANDING_TASKS_PER_CON * 8) / PAGE_SIZE;
qedi->num_queues = MIN_NUM_CPUS_MSIX(qedi);
+ QEDI_INFO(&qedi->dbg_ctx, QEDI_LOG_INFO,
+ "Number of CQ count is %d\n", qedi->num_queues);
+
memset(&qedi->pf_params.iscsi_pf_params, 0,
sizeof(qedi->pf_params.iscsi_pf_params));
@@ -2179,9 +2180,12 @@
goto free_host;
}
- qedi->msix_count = MAX_NUM_MSIX_PF;
atomic_set(&qedi->link_state, QEDI_LINK_DOWN);
+ rc = qedi_ops->fill_dev_info(qedi->cdev, &qedi->dev_info);
+ if (rc)
+ goto free_host;
+
if (mode != QEDI_MODE_RECOVERY) {
rc = qedi_set_iscsi_pf_param(qedi);
if (rc) {
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 8c6ff16..9ce28c4 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -565,47 +565,17 @@
{
struct scsi_qla_host *vha = shost_priv(dev_to_shost(container_of(kobj,
struct device, kobj)));
- struct qla_hw_data *ha = vha->hw;
- uint16_t iter, addr, offset;
int rval;
- if (!capable(CAP_SYS_ADMIN) || off != 0 || count != SFP_DEV_SIZE * 2)
+ if (!capable(CAP_SYS_ADMIN) || off != 0 || count < SFP_DEV_SIZE)
return 0;
- if (ha->sfp_data)
- goto do_read;
-
- ha->sfp_data = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL,
- &ha->sfp_data_dma);
- if (!ha->sfp_data) {
- ql_log(ql_log_warn, vha, 0x706c,
- "Unable to allocate memory for SFP read-data.\n");
+ if (qla2x00_reset_active(vha))
return 0;
- }
-do_read:
- memset(ha->sfp_data, 0, SFP_BLOCK_SIZE);
- addr = 0xa0;
- for (iter = 0, offset = 0; iter < (SFP_DEV_SIZE * 2) / SFP_BLOCK_SIZE;
- iter++, offset += SFP_BLOCK_SIZE) {
- if (iter == 4) {
- /* Skip to next device address. */
- addr = 0xa2;
- offset = 0;
- }
-
- rval = qla2x00_read_sfp(vha, ha->sfp_data_dma, ha->sfp_data,
- addr, offset, SFP_BLOCK_SIZE, BIT_1);
- if (rval != QLA_SUCCESS) {
- ql_log(ql_log_warn, vha, 0x706d,
- "Unable to read SFP data (%x/%x/%x).\n", rval,
- addr, offset);
-
- return -EIO;
- }
- memcpy(buf, ha->sfp_data, SFP_BLOCK_SIZE);
- buf += SFP_BLOCK_SIZE;
- }
+ rval = qla2x00_read_sfp_dev(vha, buf, count);
+ if (rval)
+ return -EIO;
return count;
}
@@ -615,7 +585,7 @@
.name = "sfp",
.mode = S_IRUSR | S_IWUSR,
},
- .size = SFP_DEV_SIZE * 2,
+ .size = SFP_DEV_SIZE,
.read = qla2x00_sysfs_read_sfp,
};
@@ -1511,6 +1481,38 @@
ha->pep_version[0], ha->pep_version[1], ha->pep_version[2]);
}
+static ssize_t
+qla2x00_min_link_speed_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
+ struct qla_hw_data *ha = vha->hw;
+
+ if (!IS_QLA27XX(ha))
+ return scnprintf(buf, PAGE_SIZE, "\n");
+
+ return scnprintf(buf, PAGE_SIZE, "%s\n",
+ ha->min_link_speed == 5 ? "32Gps" :
+ ha->min_link_speed == 4 ? "16Gps" :
+ ha->min_link_speed == 3 ? "8Gps" :
+ ha->min_link_speed == 2 ? "4Gps" :
+ ha->min_link_speed != 0 ? "unknown" : "");
+}
+
+static ssize_t
+qla2x00_max_speed_sup_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
+ struct qla_hw_data *ha = vha->hw;
+
+ if (!IS_QLA27XX(ha))
+ return scnprintf(buf, PAGE_SIZE, "\n");
+
+ return scnprintf(buf, PAGE_SIZE, "%s\n",
+ ha->max_speed_sup ? "32Gps" : "16Gps");
+}
+
static DEVICE_ATTR(driver_version, S_IRUGO, qla2x00_drvr_version_show, NULL);
static DEVICE_ATTR(fw_version, S_IRUGO, qla2x00_fw_version_show, NULL);
static DEVICE_ATTR(serial_num, S_IRUGO, qla2x00_serial_num_show, NULL);
@@ -1556,6 +1558,8 @@
qla2x00_allow_cna_fw_dump_show,
qla2x00_allow_cna_fw_dump_store);
static DEVICE_ATTR(pep_version, S_IRUGO, qla2x00_pep_version_show, NULL);
+static DEVICE_ATTR(min_link_speed, S_IRUGO, qla2x00_min_link_speed_show, NULL);
+static DEVICE_ATTR(max_speed_sup, S_IRUGO, qla2x00_max_speed_sup_show, NULL);
struct device_attribute *qla2x00_host_attrs[] = {
&dev_attr_driver_version,
@@ -1590,6 +1594,8 @@
&dev_attr_fw_dump_size,
&dev_attr_allow_cna_fw_dump,
&dev_attr_pep_version,
+ &dev_attr_min_link_speed,
+ &dev_attr_max_speed_sup,
NULL,
};
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index 26751d3..3e9dc54 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -14,7 +14,7 @@
* | Module Init and Probe | 0x0193 | 0x0146 |
* | | | 0x015b-0x0160 |
* | | | 0x016e |
- * | Mailbox commands | 0x1199 | 0x1193 |
+ * | Mailbox commands | 0x1205 | 0x11a2-0x11ff |
* | Device Discovery | 0x2134 | 0x210e-0x2116 |
* | | | 0x211a |
* | | | 0x211c-0x2128 |
@@ -41,7 +41,7 @@
* | | | 0x70ad-0x70ae |
* | | | 0x70d0-0x70d6 |
* | | | 0x70d7-0x70db |
- * | Task Management | 0x8042 | 0x8000,0x800b |
+ * | Task Management | 0x8042 | 0x8000 |
* | | | 0x8019 |
* | | | 0x8025,0x8026 |
* | | | 0x8031,0x8032 |
@@ -2520,8 +2520,6 @@
static inline int
ql_mask_match(uint32_t level)
{
- if (ql2xextended_error_logging == 1)
- ql2xextended_error_logging = QL_DBG_DEFAULT1_MASK;
return (level & ql2xextended_error_logging) == level;
}
@@ -2738,9 +2736,9 @@
mbx_reg = MAILBOX_REG(ha, reg, 0);
ql_dbg(level, vha, id, "Mailbox registers:\n");
- for (i = 0; i < 6; i++)
+ for (i = 0; i < 6; i++, mbx_reg++)
ql_dbg(level, vha, id,
- "mbox[%d] 0x%04x\n", i, RD_REG_WORD(mbx_reg++));
+ "mbox[%d] 0x%04x\n", i, RD_REG_WORD(mbx_reg));
}
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 0730b10..486c075 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -427,6 +427,7 @@
enum nvmefc_fcp_datadir dir;
uint32_t dl;
uint32_t timeout_sec;
+ struct list_head entry;
} nvme;
} u;
@@ -470,7 +471,7 @@
uint8_t cmd_type;
uint8_t pad[3];
atomic_t ref_count;
- wait_queue_head_t nvme_ls_waitQ;
+ wait_queue_head_t nvme_ls_waitq;
struct fc_port *fcport;
struct scsi_qla_host *vha;
uint32_t handle;
@@ -901,6 +902,7 @@
#define MBA_SHUTDOWN_REQUESTED 0x8062 /* Shutdown Requested */
#define MBA_TEMPERATURE_ALERT 0x8070 /* Temperature Alert */
#define MBA_DPORT_DIAGNOSTICS 0x8080 /* D-port Diagnostics */
+#define MBA_TRANS_INSERT 0x8130 /* Transceiver Insertion */
#define MBA_FW_INIT_FAILURE 0x8401 /* Firmware initialization failure */
#define MBA_MIRROR_LUN_CHANGE 0x8402 /* Mirror LUN State Change
Notification */
@@ -977,6 +979,7 @@
#define MBC_ABORT_TARGET 0x17 /* Abort target (ID). */
#define MBC_RESET 0x18 /* Reset. */
#define MBC_GET_ADAPTER_LOOP_ID 0x20 /* Get loop id of ISP2200. */
+#define MBC_GET_SET_ZIO_THRESHOLD 0x21 /* Get/SET ZIO THRESHOLD. */
#define MBC_GET_RETRY_COUNT 0x22 /* Get f/w retry cnt/delay. */
#define MBC_DISABLE_VI 0x24 /* Disable VI operation. */
#define MBC_ENABLE_VI 0x25 /* Enable VI operation. */
@@ -2301,8 +2304,7 @@
unsigned int login_succ:1;
struct work_struct nvme_del_work;
- atomic_t nvme_ref_count;
- wait_queue_head_t nvme_waitQ;
+ struct completion nvme_del_done;
uint32_t nvme_prli_service_param;
#define NVME_PRLI_SP_CONF BIT_7
#define NVME_PRLI_SP_INITIATOR BIT_5
@@ -3338,6 +3340,7 @@
struct work_struct q_work;
struct list_head qp_list_elem; /* vha->qp_list */
struct list_head hints_list;
+ struct list_head nvme_done_list;
uint16_t cpuid;
struct qla_tgt_counters tgt_counters;
};
@@ -3463,8 +3466,15 @@
uint32_t n2n_ae:1;
uint32_t fw_started:1;
uint32_t fw_init_done:1;
+
+ uint32_t detected_lr_sfp:1;
+ uint32_t using_lr_setting:1;
} flags;
+ uint16_t long_range_distance; /* 32G & above */
+#define LR_DISTANCE_5K 1
+#define LR_DISTANCE_10K 0
+
/* This spinlock is used to protect "io transactions", you must
* acquire it before doing any IO to the card, eg with RD_REG*() and
* WRT_REG*() for the duration of your entire commandtransaction.
@@ -3712,7 +3722,7 @@
struct sns_cmd_pkt *sns_cmd;
dma_addr_t sns_cmd_dma;
-#define SFP_DEV_SIZE 256
+#define SFP_DEV_SIZE 512
#define SFP_BLOCK_SIZE 64
void *sfp_data;
dma_addr_t sfp_data_dma;
@@ -4017,8 +4027,20 @@
struct qlt_hw_data tgt;
int allow_cna_fw_dump;
+ uint32_t fw_ability_mask;
+ uint16_t min_link_speed;
+ uint16_t max_speed_sup;
+
+ atomic_t nvme_active_aen_cnt;
+ uint16_t nvme_last_rptd_aen; /* Last recorded aen count */
};
+#define FW_ABILITY_MAX_SPEED_MASK 0xFUL
+#define FW_ABILITY_MAX_SPEED_16G 0x0
+#define FW_ABILITY_MAX_SPEED_32G 0x1
+#define FW_ABILITY_MAX_SPEED(ha) \
+ (ha->fw_ability_mask & FW_ABILITY_MAX_SPEED_MASK)
+
/*
* Qlogic scsi host structure
*/
@@ -4089,6 +4111,8 @@
#define FX00_CRITEMP_RECOVERY 25
#define FX00_HOST_INFO_RESEND 26
#define QPAIR_ONLINE_CHECK_NEEDED 27
+#define SET_ZIO_THRESHOLD_NEEDED 28
+#define DETECT_SFP_CHANGE 29
unsigned long pci_flags;
#define PFLG_DISCONNECTED 0 /* PCI device removed */
@@ -4129,8 +4153,7 @@
uint8_t fabric_node_name[WWN_SIZE];
struct nvme_fc_local_port *nvme_local_port;
- atomic_t nvme_ref_count;
- wait_queue_head_t nvme_waitQ;
+ struct completion nvme_del_done;
struct list_head nvme_rport_list;
atomic_t nvme_active_aen_cnt;
uint16_t nvme_last_rptd_aen;
@@ -4199,6 +4222,7 @@
int fcport_count;
wait_queue_head_t fcport_waitQ;
wait_queue_head_t vref_waitq;
+ uint8_t min_link_speed_feat;
} scsi_qla_host_t;
struct qla27xx_image_status {
@@ -4373,6 +4397,88 @@
WAIT_LUN,
};
+/* Refer to SNIA SFF 8247 */
+struct sff_8247_a0 {
+ u8 txid; /* transceiver id */
+ u8 ext_txid;
+ u8 connector;
+ /* compliance code */
+ u8 eth_infi_cc3; /* ethernet, inifiband */
+ u8 sonet_cc4[2];
+ u8 eth_cc6;
+ /* link length */
+#define FC_LL_VL BIT_7 /* very long */
+#define FC_LL_S BIT_6 /* Short */
+#define FC_LL_I BIT_5 /* Intermidiate*/
+#define FC_LL_L BIT_4 /* Long */
+#define FC_LL_M BIT_3 /* Medium */
+#define FC_LL_SA BIT_2 /* ShortWave laser */
+#define FC_LL_LC BIT_1 /* LongWave laser */
+#define FC_LL_EL BIT_0 /* Electrical inter enclosure */
+ u8 fc_ll_cc7;
+ /* FC technology */
+#define FC_TEC_EL BIT_7 /* Electrical inter enclosure */
+#define FC_TEC_SN BIT_6 /* short wave w/o OFC */
+#define FC_TEC_SL BIT_5 /* short wave with OFC */
+#define FC_TEC_LL BIT_4 /* Longwave Laser */
+#define FC_TEC_ACT BIT_3 /* Active cable */
+#define FC_TEC_PAS BIT_2 /* Passive cable */
+ u8 fc_tec_cc8;
+ /* Transmission Media */
+#define FC_MED_TW BIT_7 /* Twin Ax */
+#define FC_MED_TP BIT_6 /* Twited Pair */
+#define FC_MED_MI BIT_5 /* Min Coax */
+#define FC_MED_TV BIT_4 /* Video Coax */
+#define FC_MED_M6 BIT_3 /* Multimode, 62.5um */
+#define FC_MED_M5 BIT_2 /* Multimode, 50um */
+#define FC_MED_SM BIT_0 /* Single Mode */
+ u8 fc_med_cc9;
+ /* speed FC_SP_12: 12*100M = 1200 MB/s */
+#define FC_SP_12 BIT_7
+#define FC_SP_8 BIT_6
+#define FC_SP_16 BIT_5
+#define FC_SP_4 BIT_4
+#define FC_SP_32 BIT_3
+#define FC_SP_2 BIT_2
+#define FC_SP_1 BIT_0
+ u8 fc_sp_cc10;
+ u8 encode;
+ u8 bitrate;
+ u8 rate_id;
+ u8 length_km; /* offset 14/eh */
+ u8 length_100m;
+ u8 length_50um_10m;
+ u8 length_62um_10m;
+ u8 length_om4_10m;
+ u8 length_om3_10m;
+#define SFF_VEN_NAME_LEN 16
+ u8 vendor_name[SFF_VEN_NAME_LEN]; /* offset 20/14h */
+ u8 tx_compat;
+ u8 vendor_oui[3];
+#define SFF_PART_NAME_LEN 16
+ u8 vendor_pn[SFF_PART_NAME_LEN]; /* part number */
+ u8 vendor_rev[4];
+ u8 wavelength[2];
+ u8 resv;
+ u8 cc_base;
+ u8 options[2]; /* offset 64 */
+ u8 br_max;
+ u8 br_min;
+ u8 vendor_sn[16];
+ u8 date_code[8];
+ u8 diag;
+ u8 enh_options;
+ u8 sff_revision;
+ u8 cc_ext;
+ u8 vendor_specific[32];
+ u8 resv2[128];
+};
+
+#define AUTO_DETECT_SFP_SUPPORT(_vha)\
+ (ql2xautodetectsfp && !_vha->vp_idx && \
+ (IS_QLA25XX(_vha->hw) || IS_QLA81XX(_vha->hw) ||\
+ IS_QLA83XX(_vha->hw) || IS_QLA27XX(_vha->hw)))
+
#define USER_CTRL_IRQ(_ha) (ql2xuctrlirq && QLA_TGT_MODE_ENABLED() && \
(IS_QLA27XX(_ha) || IS_QLA83XX(_ha)))
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index b9c9886..bec641a 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -1699,6 +1699,15 @@
#define FAC_OPT_CMD_UNLOCK_SEMAPHORE 0x04
#define FAC_OPT_CMD_GET_SECTOR_SIZE 0x05
+/* enhanced features bit definitions */
+#define NEF_LR_DIST_ENABLE BIT_0
+
+/* LR Distance bit positions */
+#define LR_DIST_NV_POS 2
+#define LR_DIST_FW_POS 12
+#define LR_DIST_FW_SHIFT (LR_DIST_FW_POS - LR_DIST_NV_POS)
+#define LR_DIST_FW_FIELD(x) ((x) << LR_DIST_FW_SHIFT & 0xf000)
+
struct nvram_81xx {
/* NVRAM header. */
uint8_t id[4];
@@ -1745,7 +1754,9 @@
uint16_t reserved_6_3[14];
/* Offset 192. */
- uint16_t reserved_7[32];
+ uint8_t min_link_speed;
+ uint8_t reserved_7_0;
+ uint16_t reserved_7[31];
/*
* BIT 0 = Enable spinup delay
@@ -1839,16 +1850,13 @@
uint8_t reserved_21[16];
uint16_t reserved_22[3];
- /*
- * BIT 0 = Extended BB credits for LR
- * BIT 1 = Virtual Fabric Enable
- * BIT 2 = Enhanced Features Unused
- * BIT 3-7 = Enhanced Features Reserved
+ /* Offset 406 (0x196) Enhanced Features
+ * BIT 0 = Extended BB credits for LR
+ * BIT 1 = Virtual Fabric Enable
+ * BIT 2-5 = Distance Support if BIT 0 is on
+ * BIT 6-15 = Unused
*/
- /* Enhanced Features */
- uint8_t enhanced_features;
-
- uint8_t reserved_23;
+ uint16_t enhanced_features;
uint16_t reserved_24[4];
/* Offset 416. */
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index cadb6e3..f852ca6 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -10,17 +10,6 @@
#include <linux/interrupt.h>
/*
- * Global functions prototype in qla_nvme.c source file.
- */
-extern void qla_nvme_register_hba(scsi_qla_host_t *);
-extern int qla_nvme_register_remote(scsi_qla_host_t *, fc_port_t *);
-extern void qla_nvme_delete(scsi_qla_host_t *);
-extern void qla_nvme_abort(struct qla_hw_data *, srb_t *sp);
-extern void qla24xx_nvme_ls4_iocb(scsi_qla_host_t *, struct pt_ls4_request *,
- struct req_que *);
-extern void qla24xx_async_gffid_sp_done(void *, int);
-
-/*
* Global Function Prototypes in qla_init.c source file.
*/
extern int qla2x00_initialize_adapter(scsi_qla_host_t *);
@@ -116,13 +105,15 @@
int qla24xx_post_newsess_work(struct scsi_qla_host *, port_id_t *, u8 *,
void *);
int qla24xx_fcport_handle_login(struct scsi_qla_host *, fc_port_t *);
-
+int qla24xx_detect_sfp(scsi_qla_host_t *vha);
+int qla24xx_post_gpdb_work(struct scsi_qla_host *, fc_port_t *, u8);
/*
* Global Data in qla_os.c source file.
*/
extern char qla2x00_version_str[];
extern struct kmem_cache *srb_cachep;
+extern struct kmem_cache *qla_tgt_plogi_cachep;
extern int ql2xlogintimeout;
extern int qlport_down_retry;
@@ -153,6 +144,7 @@
extern int ql2xmvasynctoatio;
extern int ql2xuctrlirq;
extern int ql2xnvmeenable;
+extern int ql2xautodetectsfp;
extern int qla2x00_loop_reset(scsi_qla_host_t *);
extern void qla2x00_abort_all_cmds(scsi_qla_host_t *, int);
@@ -495,6 +487,9 @@
int __qla24xx_parse_gpdb(struct scsi_qla_host *, fc_port_t *,
struct port_database_24xx *);
+extern int qla27xx_get_zio_threshold(scsi_qla_host_t *, uint16_t *);
+extern int qla27xx_set_zio_threshold(scsi_qla_host_t *, uint16_t);
+
/*
* Global Function Prototypes in qla_isr.c source file.
*/
@@ -804,6 +799,7 @@
extern void qla82xx_clear_pending_mbx(scsi_qla_host_t *);
extern int qla82xx_read_temperature(scsi_qla_host_t *);
extern int qla8044_read_temperature(scsi_qla_host_t *);
+extern int qla2x00_read_sfp_dev(struct scsi_qla_host *, char *, int);
/* BSG related functions */
extern int qla24xx_bsg_request(struct bsg_job *);
@@ -873,4 +869,6 @@
void qlt_remove_target_resources(struct qla_hw_data *);
void qlt_clr_qp_table(struct scsi_qla_host *vha);
+void qla_nvme_cmpl_io(struct srb_iocb *);
+
#endif /* _QLA_GBL_H */
diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c
index b323a7c..bc3db6a 100644
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -2816,13 +2816,19 @@
case MODE_INITIATOR:
case MODE_DUAL:
default:
+ ql_dbg(ql_dbg_disc, vha, 0x201f,
+ "%s %d %8phC post %s\n", __func__,
+ __LINE__, fcport->port_name,
+ (atomic_read(&fcport->state) ==
+ FCS_ONLINE) ? "gpdb" : "gnl");
+
if (atomic_read(&fcport->state) ==
FCS_ONLINE)
- break;
- ql_dbg(ql_dbg_disc, vha, 0x201f,
- "%s %d %8phC post gnl\n",
- __func__, __LINE__, fcport->port_name);
- qla24xx_post_gnl_work(vha, fcport);
+ qla24xx_post_gpdb_work(vha,
+ fcport, PDO_FORCE_ADISC);
+ else
+ qla24xx_post_gnl_work(vha,
+ fcport);
break;
}
} else { /* fcport->d_id.b24 != ea->id.b24 */
@@ -3080,7 +3086,7 @@
GPSC_RSP_SIZE);
/* GPSC req */
- memcpy(ct_req->req.gpsc.port_name, fcport->port_name,
+ memcpy(ct_req->req.gpsc.port_name, fcport->fabric_port_name,
WWN_SIZE);
sp->u.iocb_cmd.u.ctarg.req = fcport->ct_desc.ct_sns;
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 072ad1a..b5b48dd 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -36,7 +36,6 @@
static struct qla_chip_state_84xx *qla84xx_get_chip(struct scsi_qla_host *);
static int qla84xx_init_chip(scsi_qla_host_t *);
static int qla25xx_init_queues(struct qla_hw_data *);
-static int qla24xx_post_gpdb_work(struct scsi_qla_host *, fc_port_t *, u8);
static int qla24xx_post_prli_work(struct scsi_qla_host*, fc_port_t *);
static void qla24xx_handle_plogi_done_event(struct scsi_qla_host *,
struct event_arg *);
@@ -774,8 +773,7 @@
return rval;
}
-static int qla24xx_post_gpdb_work(struct scsi_qla_host *vha, fc_port_t *fcport,
- u8 opt)
+int qla24xx_post_gpdb_work(struct scsi_qla_host *vha, fc_port_t *fcport, u8 opt)
{
struct qla_work_evt *e;
@@ -808,6 +806,12 @@
if (!sp)
goto done;
+ sp->type = SRB_MB_IOCB;
+ sp->name = "gpdb";
+ sp->gen1 = fcport->rscn_gen;
+ sp->gen2 = fcport->login_gen;
+ qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2);
+
pd = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &pd_dma);
if (pd == NULL) {
ql_log(ql_log_warn, vha, 0xd043,
@@ -816,12 +820,6 @@
}
memset(pd, 0, max(PORT_DATABASE_SIZE, PORT_DATABASE_24XX_SIZE));
- sp->type = SRB_MB_IOCB;
- sp->name = "gpdb";
- sp->gen1 = fcport->rscn_gen;
- sp->gen2 = fcport->login_gen;
- qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2);
-
mb = sp->u.iocb_cmd.u.mbx.out_mb;
mb[0] = MBC_GET_PORT_DATABASE;
mb[1] = fcport->loop_id;
@@ -1466,6 +1464,7 @@
__func__, __LINE__, ea->fcport->port_name);
ea->fcport->chip_reset = vha->hw->base_qpair->chip_reset;
ea->fcport->logout_on_delete = 1;
+ ea->fcport->send_els_logo = 0;
qla24xx_post_gpdb_work(vha, ea->fcport, 0);
}
break;
@@ -2823,6 +2822,147 @@
return QLA_SUCCESS;
}
+#define PRINT_FIELD(_field, _flag, _str) { \
+ if (a0->_field & _flag) {\
+ if (p) {\
+ strcat(ptr, "|");\
+ ptr++;\
+ leftover--;\
+ } \
+ len = snprintf(ptr, leftover, "%s", _str); \
+ p = 1;\
+ leftover -= len;\
+ ptr += len; \
+ } \
+}
+
+static void qla2xxx_print_sfp_info(struct scsi_qla_host *vha)
+{
+#define STR_LEN 64
+ struct sff_8247_a0 *a0 = (struct sff_8247_a0 *)vha->hw->sfp_data;
+ u8 str[STR_LEN], *ptr, p;
+ int leftover, len;
+
+ memset(str, 0, STR_LEN);
+ snprintf(str, SFF_VEN_NAME_LEN+1, a0->vendor_name);
+ ql_dbg(ql_dbg_init, vha, 0x015a,
+ "SFP MFG Name: %s\n", str);
+
+ memset(str, 0, STR_LEN);
+ snprintf(str, SFF_PART_NAME_LEN+1, a0->vendor_pn);
+ ql_dbg(ql_dbg_init, vha, 0x015c,
+ "SFP Part Name: %s\n", str);
+
+ /* media */
+ memset(str, 0, STR_LEN);
+ ptr = str;
+ leftover = STR_LEN;
+ p = len = 0;
+ PRINT_FIELD(fc_med_cc9, FC_MED_TW, "Twin AX");
+ PRINT_FIELD(fc_med_cc9, FC_MED_TP, "Twisted Pair");
+ PRINT_FIELD(fc_med_cc9, FC_MED_MI, "Min Coax");
+ PRINT_FIELD(fc_med_cc9, FC_MED_TV, "Video Coax");
+ PRINT_FIELD(fc_med_cc9, FC_MED_M6, "MultiMode 62.5um");
+ PRINT_FIELD(fc_med_cc9, FC_MED_M5, "MultiMode 50um");
+ PRINT_FIELD(fc_med_cc9, FC_MED_SM, "SingleMode");
+ ql_dbg(ql_dbg_init, vha, 0x0160,
+ "SFP Media: %s\n", str);
+
+ /* link length */
+ memset(str, 0, STR_LEN);
+ ptr = str;
+ leftover = STR_LEN;
+ p = len = 0;
+ PRINT_FIELD(fc_ll_cc7, FC_LL_VL, "Very Long");
+ PRINT_FIELD(fc_ll_cc7, FC_LL_S, "Short");
+ PRINT_FIELD(fc_ll_cc7, FC_LL_I, "Intermediate");
+ PRINT_FIELD(fc_ll_cc7, FC_LL_L, "Long");
+ PRINT_FIELD(fc_ll_cc7, FC_LL_M, "Medium");
+ ql_dbg(ql_dbg_init, vha, 0x0196,
+ "SFP Link Length: %s\n", str);
+
+ memset(str, 0, STR_LEN);
+ ptr = str;
+ leftover = STR_LEN;
+ p = len = 0;
+ PRINT_FIELD(fc_ll_cc7, FC_LL_SA, "Short Wave (SA)");
+ PRINT_FIELD(fc_ll_cc7, FC_LL_LC, "Long Wave(LC)");
+ PRINT_FIELD(fc_tec_cc8, FC_TEC_SN, "Short Wave (SN)");
+ PRINT_FIELD(fc_tec_cc8, FC_TEC_SL, "Short Wave (SL)");
+ PRINT_FIELD(fc_tec_cc8, FC_TEC_LL, "Long Wave (LL)");
+ ql_dbg(ql_dbg_init, vha, 0x016e,
+ "SFP FC Link Tech: %s\n", str);
+
+ if (a0->length_km)
+ ql_dbg(ql_dbg_init, vha, 0x016f,
+ "SFP Distant: %d km\n", a0->length_km);
+ if (a0->length_100m)
+ ql_dbg(ql_dbg_init, vha, 0x0170,
+ "SFP Distant: %d m\n", a0->length_100m*100);
+ if (a0->length_50um_10m)
+ ql_dbg(ql_dbg_init, vha, 0x0189,
+ "SFP Distant (WL=50um): %d m\n", a0->length_50um_10m * 10);
+ if (a0->length_62um_10m)
+ ql_dbg(ql_dbg_init, vha, 0x018a,
+ "SFP Distant (WL=62.5um): %d m\n", a0->length_62um_10m * 10);
+ if (a0->length_om4_10m)
+ ql_dbg(ql_dbg_init, vha, 0x0194,
+ "SFP Distant (OM4): %d m\n", a0->length_om4_10m * 10);
+ if (a0->length_om3_10m)
+ ql_dbg(ql_dbg_init, vha, 0x0195,
+ "SFP Distant (OM3): %d m\n", a0->length_om3_10m * 10);
+}
+
+
+/*
+ * Return Code:
+ * QLA_SUCCESS: no action
+ * QLA_INTERFACE_ERROR: SFP is not there.
+ * QLA_FUNCTION_FAILED: detected New SFP
+ */
+int
+qla24xx_detect_sfp(scsi_qla_host_t *vha)
+{
+ int rc = QLA_SUCCESS;
+ struct sff_8247_a0 *a;
+ struct qla_hw_data *ha = vha->hw;
+
+ if (!AUTO_DETECT_SFP_SUPPORT(vha))
+ goto out;
+
+ rc = qla2x00_read_sfp_dev(vha, NULL, 0);
+ if (rc)
+ goto out;
+
+ a = (struct sff_8247_a0 *)vha->hw->sfp_data;
+ qla2xxx_print_sfp_info(vha);
+
+ if (a->fc_ll_cc7 & FC_LL_VL || a->fc_ll_cc7 & FC_LL_L) {
+ /* long range */
+ ha->flags.detected_lr_sfp = 1;
+
+ if (a->length_km > 5 || a->length_100m > 50)
+ ha->long_range_distance = LR_DISTANCE_10K;
+ else
+ ha->long_range_distance = LR_DISTANCE_5K;
+
+ if (ha->flags.detected_lr_sfp != ha->flags.using_lr_setting)
+ ql_dbg(ql_dbg_async, vha, 0x507b,
+ "Detected Long Range SFP.\n");
+ } else {
+ /* short range */
+ ha->flags.detected_lr_sfp = 0;
+ if (ha->flags.using_lr_setting)
+ ql_dbg(ql_dbg_async, vha, 0x5084,
+ "Detected Short Range SFP.\n");
+ }
+
+ if (!vha->flags.init_done)
+ rc = QLA_SUCCESS;
+out:
+ return rc;
+}
+
/**
* qla2x00_setup_chip() - Load and start RISC firmware.
* @ha: HA context
@@ -2879,6 +3019,8 @@
rval = qla2x00_execute_fw(vha, srisc_address);
/* Retrieve firmware information. */
if (rval == QLA_SUCCESS) {
+ qla24xx_detect_sfp(vha);
+
rval = qla2x00_set_exlogins_buffer(vha);
if (rval != QLA_SUCCESS)
goto failed;
@@ -4609,24 +4751,16 @@
qla2x00_fdmi_register(vha);
/* Ensure we are logged into the SNS. */
- if (IS_FWI2_CAPABLE(ha))
- loop_id = NPH_SNS;
- else
- loop_id = SIMPLE_NAME_SERVER;
+ loop_id = NPH_SNS_LID(ha);
rval = ha->isp_ops->fabric_login(vha, loop_id, 0xff, 0xff,
0xfc, mb, BIT_1|BIT_0);
- if (rval != QLA_SUCCESS) {
+ if (rval != QLA_SUCCESS || mb[0] != MBS_COMMAND_COMPLETE) {
+ ql_dbg(ql_dbg_disc, vha, 0x20a1,
+ "Failed SNS login: loop_id=%x mb[0]=%x mb[1]=%x mb[2]=%x mb[6]=%x mb[7]=%x (%x).\n",
+ loop_id, mb[0], mb[1], mb[2], mb[6], mb[7], rval);
set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
return rval;
}
- if (mb[0] != MBS_COMMAND_COMPLETE) {
- ql_dbg(ql_dbg_disc, vha, 0x20a1,
- "Failed SNS login: loop_id=%x mb[0]=%x mb[1]=%x mb[2]=%x "
- "mb[6]=%x mb[7]=%x.\n", loop_id, mb[0], mb[1],
- mb[2], mb[6], mb[7]);
- return (QLA_SUCCESS);
- }
-
if (test_and_clear_bit(REGISTER_FC4_NEEDED, &vha->dpc_flags)) {
if (qla2x00_rft_id(vha)) {
/* EMPTY */
@@ -4804,6 +4938,7 @@
new_fcport->fc4_type = swl[swl_idx].fc4_type;
new_fcport->nvme_flag = 0;
+ new_fcport->fc4f_nvme = 0;
if (vha->flags.nvme_enabled &&
swl[swl_idx].fc4f_nvme) {
new_fcport->fc4f_nvme =
@@ -5913,7 +6048,7 @@
if (!status) {
ql_dbg(ql_dbg_taskm, vha, 0x8022, "%s succeeded.\n", __func__);
-
+ qla2x00_configure_hba(vha);
spin_lock_irqsave(&ha->vport_slock, flags);
list_for_each_entry(vp, &ha->vp_list, list) {
if (vp->vp_idx) {
@@ -7804,7 +7939,9 @@
ha->queue_pair_map[qpair_id] = qpair;
qpair->id = qpair_id;
qpair->vp_idx = vp_idx;
+ qpair->fw_started = ha->flags.fw_started;
INIT_LIST_HEAD(&qpair->hints_list);
+ INIT_LIST_HEAD(&qpair->nvme_done_list);
qpair->chip_reset = ha->base_qpair->chip_reset;
qpair->enable_class_2 = ha->base_qpair->enable_class_2;
qpair->enable_explicit_conf =
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index a36c485..2f94159 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -2682,12 +2682,12 @@
uint32_t *cur_dsd;
struct scatterlist *sg;
int index;
- uint16_t tot_dsds;
+ uint16_t cmd_dsds, rsp_dsds;
scsi_qla_host_t *vha = sp->vha;
struct qla_hw_data *ha = vha->hw;
struct bsg_job *bsg_job = sp->u.bsg_job;
- int loop_iterartion = 0;
int entry_count = 1;
+ cont_a64_entry_t *cont_pkt = NULL;
ct_iocb->entry_type = CT_IOCB_TYPE;
ct_iocb->entry_status = 0;
@@ -2698,30 +2698,46 @@
ct_iocb->vp_index = sp->vha->vp_idx;
ct_iocb->comp_status = cpu_to_le16(0);
- ct_iocb->cmd_dsd_count =
- cpu_to_le16(bsg_job->request_payload.sg_cnt);
+ cmd_dsds = bsg_job->request_payload.sg_cnt;
+ rsp_dsds = bsg_job->reply_payload.sg_cnt;
+
+ ct_iocb->cmd_dsd_count = cpu_to_le16(cmd_dsds);
ct_iocb->timeout = 0;
- ct_iocb->rsp_dsd_count =
- cpu_to_le16(bsg_job->reply_payload.sg_cnt);
- ct_iocb->rsp_byte_count =
- cpu_to_le32(bsg_job->reply_payload.payload_len);
+ ct_iocb->rsp_dsd_count = cpu_to_le16(rsp_dsds);
ct_iocb->cmd_byte_count =
cpu_to_le32(bsg_job->request_payload.payload_len);
- ct_iocb->dseg_0_address[0] = cpu_to_le32(LSD(sg_dma_address
- (bsg_job->request_payload.sg_list)));
- ct_iocb->dseg_0_address[1] = cpu_to_le32(MSD(sg_dma_address
- (bsg_job->request_payload.sg_list)));
- ct_iocb->dseg_0_len = cpu_to_le32(sg_dma_len
- (bsg_job->request_payload.sg_list));
- avail_dsds = 1;
- cur_dsd = (uint32_t *)ct_iocb->dseg_1_address;
+ avail_dsds = 2;
+ cur_dsd = (uint32_t *)ct_iocb->dseg_0_address;
index = 0;
- tot_dsds = bsg_job->reply_payload.sg_cnt;
- for_each_sg(bsg_job->reply_payload.sg_list, sg, tot_dsds, index) {
+ for_each_sg(bsg_job->request_payload.sg_list, sg, cmd_dsds, index) {
dma_addr_t sle_dma;
- cont_a64_entry_t *cont_pkt;
+
+ /* Allocate additional continuation packets? */
+ if (avail_dsds == 0) {
+ /*
+ * Five DSDs are available in the Cont.
+ * Type 1 IOCB.
+ */
+ cont_pkt = qla2x00_prep_cont_type1_iocb(
+ vha, ha->req_q_map[0]);
+ cur_dsd = (uint32_t *) cont_pkt->dseg_0_address;
+ avail_dsds = 5;
+ entry_count++;
+ }
+
+ sle_dma = sg_dma_address(sg);
+ *cur_dsd++ = cpu_to_le32(LSD(sle_dma));
+ *cur_dsd++ = cpu_to_le32(MSD(sle_dma));
+ *cur_dsd++ = cpu_to_le32(sg_dma_len(sg));
+ avail_dsds--;
+ }
+
+ index = 0;
+
+ for_each_sg(bsg_job->reply_payload.sg_list, sg, rsp_dsds, index) {
+ dma_addr_t sle_dma;
/* Allocate additional continuation packets? */
if (avail_dsds == 0) {
@@ -2740,7 +2756,6 @@
*cur_dsd++ = cpu_to_le32(LSD(sle_dma));
*cur_dsd++ = cpu_to_le32(MSD(sle_dma));
*cur_dsd++ = cpu_to_le32(sg_dma_len(sg));
- loop_iterartion++;
avail_dsds--;
}
ct_iocb->entry_count = entry_count;
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 7b3b702..9d9668a 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -14,6 +14,8 @@
#include <scsi/scsi_tcq.h>
#include <scsi/scsi_bsg_fc.h>
#include <scsi/scsi_eh.h>
+#include <scsi/fc/fc_fs.h>
+#include <linux/nvme-fc-driver.h>
static void qla2x00_mbx_completion(scsi_qla_host_t *, uint16_t);
static void qla2x00_status_entry(scsi_qla_host_t *, struct rsp_que *, void *);
@@ -452,7 +454,7 @@
uint16_t peg_fw_state, nw_interface_link_up;
uint16_t nw_interface_signal_detect, sfp_status;
uint16_t htbt_counter, htbt_monitor_enable;
- uint16_t sfp_additonal_info, sfp_multirate;
+ uint16_t sfp_additional_info, sfp_multirate;
uint16_t sfp_tx_fault, link_speed, dcbx_status;
/*
@@ -492,7 +494,7 @@
sfp_status = ((mb[2] & 0x0c00) >> 10);
htbt_counter = ((mb[2] & 0x7000) >> 12);
htbt_monitor_enable = ((mb[2] & 0x8000) >> 15);
- sfp_additonal_info = (mb[6] & 0x0003);
+ sfp_additional_info = (mb[6] & 0x0003);
sfp_multirate = ((mb[6] & 0x0004) >> 2);
sfp_tx_fault = ((mb[6] & 0x0008) >> 3);
link_speed = ((mb[6] & 0x0070) >> 4);
@@ -507,9 +509,9 @@
sfp_status);
ql_log(ql_log_warn, vha, 0x5067,
"htbt_counter=0x%x, htbt_monitor_enable=0x%x, "
- "sfp_additonal_info=0x%x, sfp_multirate=0x%x.\n ",
+ "sfp_additional_info=0x%x, sfp_multirate=0x%x.\n ",
htbt_counter, htbt_monitor_enable,
- sfp_additonal_info, sfp_multirate);
+ sfp_additional_info, sfp_multirate);
ql_log(ql_log_warn, vha, 0x5068,
"sfp_tx_fault=0x%x, link_state=0x%x, "
"dcbx_status=0x%x.\n", sfp_tx_fault, link_speed,
@@ -799,6 +801,11 @@
vha->flags.management_server_logged_in = 0;
qla2x00_post_aen_work(vha, FCH_EVT_LINKUP, ha->link_data_rate);
+
+ if (AUTO_DETECT_SFP_SUPPORT(vha)) {
+ set_bit(DETECT_SFP_CHANGE, &vha->dpc_flags);
+ qla2xxx_wake_dpc(vha);
+ }
break;
case MBA_LOOP_DOWN: /* Loop Down Event */
@@ -1228,6 +1235,11 @@
schedule_work(&ha->board_disable);
break;
+ case MBA_TRANS_INSERT:
+ ql_dbg(ql_dbg_async, vha, 0x5091,
+ "Transceiver Insertion: %04x\n", mb[1]);
+ break;
+
default:
ql_dbg(ql_dbg_async, vha, 0x5057,
"Unknown AEN:%04x %04x %04x %04x\n",
@@ -1537,8 +1549,6 @@
sp = qla2x00_get_sp_from_handle(vha, func, req, pkt);
if (!sp)
return;
- bsg_job = sp->u.bsg_job;
- bsg_reply = bsg_job->reply;
type = NULL;
switch (sp->type) {
@@ -1577,6 +1587,8 @@
/* return FC_CTELS_STATUS_OK and leave the decoding of the ELS/CT
* fc payload to the caller
*/
+ bsg_job = sp->u.bsg_job;
+ bsg_reply = bsg_job->reply;
bsg_reply->reply_data.ctels_reply.status = FC_CTELS_STATUS_OK;
bsg_job->reply_len = sizeof(struct fc_bsg_reply) + sizeof(fw_status);
@@ -1823,7 +1835,7 @@
nvme = &sp->u.iocb_cmd;
if (unlikely(nvme->u.nvme.aen_op))
- atomic_dec(&sp->vha->nvme_active_aen_cnt);
+ atomic_dec(&sp->vha->hw->nvme_active_aen_cnt);
/*
* State flags: Bit 6 and 0.
@@ -1856,17 +1868,42 @@
fd->transferred_length = fd->payload_length -
le32_to_cpu(sts->residual_len);
+ /*
+ * If transport error then Failure (HBA rejects request)
+ * otherwise transport will handle.
+ */
if (sts->entry_status) {
ql_log(ql_log_warn, fcport->vha, 0x5038,
"NVME-%s error - hdl=%x entry-status(%x).\n",
sp->name, sp->handle, sts->entry_status);
ret = QLA_FUNCTION_FAILED;
- } else if (sts->comp_status != cpu_to_le16(CS_COMPLETE)) {
- ql_log(ql_log_warn, fcport->vha, 0x5039,
- "NVME-%s error - hdl=%x completion status(%x) resid=%x ox_id=%x\n",
- sp->name, sp->handle, sts->comp_status,
- le32_to_cpu(sts->residual_len), sts->ox_id);
- ret = QLA_FUNCTION_FAILED;
+ } else {
+ switch (le16_to_cpu(sts->comp_status)) {
+ case CS_COMPLETE:
+ ret = 0;
+ break;
+
+ case CS_ABORTED:
+ case CS_RESET:
+ case CS_PORT_UNAVAILABLE:
+ case CS_PORT_LOGGED_OUT:
+ case CS_PORT_BUSY:
+ ql_log(ql_log_warn, fcport->vha, 0x5060,
+ "NVME-%s ERR Handling - hdl=%x completion status(%x) resid=%x ox_id=%x\n",
+ sp->name, sp->handle, sts->comp_status,
+ le32_to_cpu(sts->residual_len), sts->ox_id);
+ fd->transferred_length = fd->payload_length;
+ ret = QLA_ABORTED;
+ break;
+
+ default:
+ ql_log(ql_log_warn, fcport->vha, 0x5060,
+ "NVME-%s error - hdl=%x completion status(%x) resid=%x ox_id=%x\n",
+ sp->name, sp->handle, sts->comp_status,
+ le32_to_cpu(sts->residual_len), sts->ox_id);
+ ret = QLA_FUNCTION_FAILED;
+ break;
+ }
}
sp->done(sp, ret);
}
@@ -2827,8 +2864,8 @@
sp->done(sp, 0);
}
-void qla24xx_nvme_ls4_iocb(scsi_qla_host_t *vha, struct pt_ls4_request *pkt,
- struct req_que *req)
+void qla24xx_nvme_ls4_iocb(struct scsi_qla_host *vha,
+ struct pt_ls4_request *pkt, struct req_que *req)
{
srb_t *sp;
const char func[] = "LS4_IOCB";
@@ -3132,7 +3169,6 @@
struct device_reg_24xx __iomem *reg;
struct scsi_qla_host *vha;
unsigned long flags;
- uint32_t stat = 0;
rsp = (struct rsp_que *) dev_id;
if (!rsp) {
@@ -3146,19 +3182,11 @@
spin_lock_irqsave(&ha->hardware_lock, flags);
vha = pci_get_drvdata(ha->pdev);
- /*
- * Use host_status register to check to PCI disconnection before we
- * we process the response queue.
- */
- stat = RD_REG_DWORD(®->host_status);
- if (qla2x00_check_reg32_for_disconnect(vha, stat))
- goto out;
qla24xx_process_response_queue(vha, rsp);
if (!ha->flags.disable_msix_handshake) {
WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT);
RD_REG_DWORD_RELAXED(®->hccr);
}
-out:
spin_unlock_irqrestore(&ha->hardware_lock, flags);
return IRQ_HANDLED;
@@ -3429,7 +3457,7 @@
}
/* Enable MSI-X vector for response queue update for queue 0 */
- if (IS_QLA25XX(ha) || IS_QLA83XX(ha) || IS_QLA27XX(ha)) {
+ if (IS_QLA83XX(ha) || IS_QLA27XX(ha)) {
if (ha->msixbase && ha->mqiobase &&
(ha->max_rsp_queues > 1 || ha->max_req_queues > 1 ||
ql2xmqsupport))
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 7c6d1a4..99502fa 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -54,6 +54,10 @@
{ MBC_GET_MEM_OFFLOAD_CNTRL_STAT },
{ MBC_GET_RETRY_COUNT },
{ MBC_TRACE_CONTROL },
+ { MBC_INITIALIZE_MULTIQ },
+ { MBC_IOCB_COMMAND_A64 },
+ { MBC_GET_ADAPTER_LOOP_ID },
+ { MBC_READ_SFP },
};
static int is_rom_cmd(uint16_t cmd)
@@ -102,7 +106,6 @@
uint16_t __iomem *optr;
uint32_t cnt;
uint32_t mboxes;
- uint16_t __iomem *mbx_reg;
unsigned long wait_time;
struct qla_hw_data *ha = vha->hw;
scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
@@ -486,21 +489,24 @@
mbx_done:
if (rval) {
- ql_dbg(ql_dbg_disc, base_vha, 0x1020,
- "**** Failed mbx[0]=%x, mb[1]=%x, mb[2]=%x, mb[3]=%x, cmd=%x ****.\n",
- mcp->mb[0], mcp->mb[1], mcp->mb[2], mcp->mb[3], command);
-
+ if (ql2xextended_error_logging & (ql_dbg_disc|ql_dbg_mbx)) {
+ pr_warn("%s [%s]-%04x:%ld: **** Failed", QL_MSGHDR,
+ dev_name(&ha->pdev->dev), 0x1020+0x800,
+ vha->host_no);
+ mboxes = mcp->in_mb;
+ cnt = 4;
+ for (i = 0; i < ha->mbx_count && cnt; i++, mboxes >>= 1)
+ if (mboxes & BIT_0) {
+ printk(" mb[%u]=%x", i, mcp->mb[i]);
+ cnt--;
+ }
+ pr_warn(" cmd=%x ****\n", command);
+ }
ql_dbg(ql_dbg_mbx, vha, 0x1198,
- "host status: 0x%x, flags:0x%lx, intr ctrl reg:0x%x, intr status:0x%x\n",
+ "host_status=%#x intr_ctrl=%#x intr_status=%#x\n",
RD_REG_DWORD(®->isp24.host_status),
- ha->fw_dump_cap_flags,
RD_REG_DWORD(®->isp24.ictrl),
RD_REG_DWORD(®->isp24.istatus));
-
- mbx_reg = ®->isp24.mailbox0;
- for (i = 0; i < 6; i++)
- ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1199,
- "mbox[%d] 0x%04x\n", i, RD_REG_WORD(mbx_reg++));
} else {
ql_dbg(ql_dbg_mbx, base_vha, 0x1021, "Done %s.\n", __func__);
}
@@ -561,6 +567,28 @@
#define EXTENDED_BB_CREDITS BIT_0
#define NVME_ENABLE_FLAG BIT_3
+static inline uint16_t qla25xx_set_sfp_lr_dist(struct qla_hw_data *ha)
+{
+ uint16_t mb4 = BIT_0;
+
+ if (IS_QLA83XX(ha) || IS_QLA27XX(ha))
+ mb4 |= ha->long_range_distance << LR_DIST_FW_POS;
+
+ return mb4;
+}
+
+static inline uint16_t qla25xx_set_nvr_lr_dist(struct qla_hw_data *ha)
+{
+ uint16_t mb4 = BIT_0;
+
+ if (IS_QLA83XX(ha) || IS_QLA27XX(ha)) {
+ struct nvram_81xx *nv = ha->nvram;
+
+ mb4 |= LR_DIST_FW_FIELD(nv->enhanced_features);
+ }
+
+ return mb4;
+}
/*
* qla2x00_execute_fw
@@ -595,17 +623,44 @@
mcp->mb[1] = MSW(risc_addr);
mcp->mb[2] = LSW(risc_addr);
mcp->mb[3] = 0;
+ mcp->mb[4] = 0;
+ ha->flags.using_lr_setting = 0;
if (IS_QLA25XX(ha) || IS_QLA81XX(ha) || IS_QLA83XX(ha) ||
IS_QLA27XX(ha)) {
- struct nvram_81xx *nv = ha->nvram;
- mcp->mb[4] = (nv->enhanced_features &
- EXTENDED_BB_CREDITS);
- } else
- mcp->mb[4] = 0;
+ if (ql2xautodetectsfp) {
+ if (ha->flags.detected_lr_sfp) {
+ mcp->mb[4] |=
+ qla25xx_set_sfp_lr_dist(ha);
+ ha->flags.using_lr_setting = 1;
+ }
+ } else {
+ struct nvram_81xx *nv = ha->nvram;
+ /* set LR distance if specified in nvram */
+ if (nv->enhanced_features &
+ NEF_LR_DIST_ENABLE) {
+ mcp->mb[4] |=
+ qla25xx_set_nvr_lr_dist(ha);
+ ha->flags.using_lr_setting = 1;
+ }
+ }
+ }
if (ql2xnvmeenable && IS_QLA27XX(ha))
mcp->mb[4] |= NVME_ENABLE_FLAG;
+ if (IS_QLA83XX(ha) || IS_QLA27XX(ha)) {
+ struct nvram_81xx *nv = ha->nvram;
+ /* set minimum speed if specified in nvram */
+ if (nv->min_link_speed >= 2 &&
+ nv->min_link_speed <= 5) {
+ mcp->mb[4] |= BIT_4;
+ mcp->mb[11] = nv->min_link_speed;
+ mcp->out_mb |= MBX_11;
+ mcp->in_mb |= BIT_5;
+ vha->min_link_speed_feat = nv->min_link_speed;
+ }
+ }
+
if (ha->flags.exlogins_enabled)
mcp->mb[4] |= ENABLE_EXTENDED_LOGIN;
@@ -613,7 +668,7 @@
mcp->mb[4] |= ENABLE_EXCHANGE_OFFLD;
mcp->out_mb |= MBX_4|MBX_3|MBX_2|MBX_1;
- mcp->in_mb |= MBX_1;
+ mcp->in_mb |= MBX_3 | MBX_2 | MBX_1;
} else {
mcp->mb[1] = LSW(risc_addr);
mcp->out_mb |= MBX_1;
@@ -632,12 +687,30 @@
"Failed=%x mb[0]=%x.\n", rval, mcp->mb[0]);
} else {
if (IS_FWI2_CAPABLE(ha)) {
- ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1027,
- "Done exchanges=%x.\n", mcp->mb[1]);
- } else {
- ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1028,
- "Done %s.\n", __func__);
+ ha->fw_ability_mask = mcp->mb[3] << 16 | mcp->mb[2];
+ ql_dbg(ql_dbg_mbx, vha, 0x119a,
+ "fw_ability_mask=%x.\n", ha->fw_ability_mask);
+ ql_dbg(ql_dbg_mbx, vha, 0x1027,
+ "exchanges=%x.\n", mcp->mb[1]);
+ if (IS_QLA83XX(ha) || IS_QLA27XX(ha)) {
+ ha->max_speed_sup = mcp->mb[2] & BIT_0;
+ ql_dbg(ql_dbg_mbx, vha, 0x119b,
+ "Maximum speed supported=%s.\n",
+ ha->max_speed_sup ? "32Gps" : "16Gps");
+ if (vha->min_link_speed_feat) {
+ ha->min_link_speed = mcp->mb[5];
+ ql_dbg(ql_dbg_mbx, vha, 0x119c,
+ "Minimum speed set=%s.\n",
+ mcp->mb[5] == 5 ? "32Gps" :
+ mcp->mb[5] == 4 ? "16Gps" :
+ mcp->mb[5] == 3 ? "8Gps" :
+ mcp->mb[5] == 2 ? "4Gps" :
+ "unknown");
+ }
+ }
}
+ ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1028,
+ "Done.\n");
}
return rval;
@@ -947,20 +1020,12 @@
"%s: Firmware supports Exchange Offload 0x%x\n",
__func__, ha->fw_attributes_h);
- /* bit 26 of fw_attributes */
- if ((ha->fw_attributes_h & 0x400) && ql2xnvmeenable) {
- struct init_cb_24xx *icb;
-
- icb = (struct init_cb_24xx *)ha->init_cb;
- /*
- * fw supports nvme and driver load
- * parameter requested nvme
- */
+ /*
+ * FW supports nvme and driver load parameter requested nvme.
+ * BIT 26 of fw_attributes indicates NVMe support.
+ */
+ if ((ha->fw_attributes_h & 0x400) && ql2xnvmeenable)
vha->flags.nvme_enabled = 1;
- icb->firmware_options_2 &= cpu_to_le32(~0xf);
- ha->zio_mode = 0;
- ha->zio_timer = 0;
- }
}
@@ -1673,7 +1738,11 @@
"Failed=%x mb[0]=%x, mb[1]=%x, mb[2]=%x, mb[3]=%x,.\n",
rval, mcp->mb[0], mcp->mb[1], mcp->mb[2], mcp->mb[3]);
} else {
- /*EMPTY*/
+ if (IS_QLA27XX(ha)) {
+ if (mcp->mb[2] == 6 || mcp->mb[3] == 2)
+ ql_dbg(ql_dbg_mbx, vha, 0x119d,
+ "Invalid SFP/Validation Failed\n");
+ }
ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x104e,
"Done %s.\n", __func__);
}
@@ -1878,6 +1947,7 @@
int rval;
mbx_cmd_t mc;
mbx_cmd_t *mcp = &mc;
+ struct qla_hw_data *ha = vha->hw;
ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1054,
"Entered %s.\n", __func__);
@@ -1906,7 +1976,11 @@
/*EMPTY*/
ql_dbg(ql_dbg_mbx, vha, 0x1055, "Failed=%x.\n", rval);
} else {
- /*EMPTY*/
+ if (IS_QLA27XX(ha)) {
+ if (mcp->mb[2] == 6 || mcp->mb[3] == 2)
+ ql_dbg(ql_dbg_mbx, vha, 0x119e,
+ "Invalid SFP/Validation Failed\n");
+ }
ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1056,
"Done %s.\n", __func__);
}
@@ -3689,7 +3763,7 @@
if (qla_ini_mode_enabled(vha) &&
ha->flags.fawwpn_enabled &&
(rptid_entry->u.f1.flags &
- VP_FLAGS_NAME_VALID)) {
+ BIT_6)) {
memcpy(vha->port_name,
rptid_entry->u.f1.port_name,
WWN_SIZE);
@@ -4590,6 +4664,10 @@
if (rval != QLA_SUCCESS) {
ql_dbg(ql_dbg_mbx, vha, 0x10e9,
"Failed=%x mb[0]=%x.\n", rval, mcp->mb[0]);
+ if (mcp->mb[0] == MBS_COMMAND_ERROR &&
+ mcp->mb[1] == 0x22)
+ /* sfp is not there */
+ rval = QLA_INTERFACE_ERROR;
} else {
ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x10ea,
"Done %s.\n", __func__);
@@ -5817,7 +5895,7 @@
dd_dma = dma_map_single(&vha->hw->pdev->dev,
dd_buf, size, DMA_FROM_DEVICE);
- if (!dd_dma) {
+ if (dma_mapping_error(&vha->hw->pdev->dev, dd_dma)) {
ql_log(ql_log_warn, vha, 0x1194, "Failed to map dma buffer.\n");
return QLA_MEMORY_ALLOC_FAILED;
}
@@ -6085,3 +6163,108 @@
done:
return rval;
}
+
+int qla27xx_set_zio_threshold(scsi_qla_host_t *vha, uint16_t value)
+{
+ int rval;
+ mbx_cmd_t mc;
+ mbx_cmd_t *mcp = &mc;
+
+ ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1200,
+ "Entered %s\n", __func__);
+
+ memset(mcp->mb, 0 , sizeof(mcp->mb));
+ mcp->mb[0] = MBC_GET_SET_ZIO_THRESHOLD;
+ mcp->mb[1] = cpu_to_le16(1);
+ mcp->mb[2] = cpu_to_le16(value);
+ mcp->out_mb = MBX_2 | MBX_1 | MBX_0;
+ mcp->in_mb = MBX_2 | MBX_0;
+ mcp->tov = MBX_TOV_SECONDS;
+ mcp->flags = 0;
+
+ rval = qla2x00_mailbox_command(vha, mcp);
+
+ ql_dbg(ql_dbg_mbx, vha, 0x1201, "%s %x\n",
+ (rval != QLA_SUCCESS) ? "Failed" : "Done", rval);
+
+ return rval;
+}
+
+int qla27xx_get_zio_threshold(scsi_qla_host_t *vha, uint16_t *value)
+{
+ int rval;
+ mbx_cmd_t mc;
+ mbx_cmd_t *mcp = &mc;
+
+ ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1203,
+ "Entered %s\n", __func__);
+
+ memset(mcp->mb, 0, sizeof(mcp->mb));
+ mcp->mb[0] = MBC_GET_SET_ZIO_THRESHOLD;
+ mcp->mb[1] = cpu_to_le16(0);
+ mcp->out_mb = MBX_1 | MBX_0;
+ mcp->in_mb = MBX_2 | MBX_0;
+ mcp->tov = MBX_TOV_SECONDS;
+ mcp->flags = 0;
+
+ rval = qla2x00_mailbox_command(vha, mcp);
+ if (rval == QLA_SUCCESS)
+ *value = mc.mb[2];
+
+ ql_dbg(ql_dbg_mbx, vha, 0x1205, "%s %x\n",
+ (rval != QLA_SUCCESS) ? "Failed" : "Done", rval);
+
+ return rval;
+}
+
+int
+qla2x00_read_sfp_dev(struct scsi_qla_host *vha, char *buf, int count)
+{
+ struct qla_hw_data *ha = vha->hw;
+ uint16_t iter, addr, offset;
+ dma_addr_t phys_addr;
+ int rval, c;
+ u8 *sfp_data;
+
+ memset(ha->sfp_data, 0, SFP_DEV_SIZE);
+ addr = 0xa0;
+ phys_addr = ha->sfp_data_dma;
+ sfp_data = ha->sfp_data;
+ offset = c = 0;
+
+ for (iter = 0; iter < SFP_DEV_SIZE / SFP_BLOCK_SIZE; iter++) {
+ if (iter == 4) {
+ /* Skip to next device address. */
+ addr = 0xa2;
+ offset = 0;
+ }
+
+ rval = qla2x00_read_sfp(vha, phys_addr, sfp_data,
+ addr, offset, SFP_BLOCK_SIZE, BIT_1);
+ if (rval != QLA_SUCCESS) {
+ ql_log(ql_log_warn, vha, 0x706d,
+ "Unable to read SFP data (%x/%x/%x).\n", rval,
+ addr, offset);
+
+ return rval;
+ }
+
+ if (buf && (c < count)) {
+ u16 sz;
+
+ if ((count - c) >= SFP_BLOCK_SIZE)
+ sz = SFP_BLOCK_SIZE;
+ else
+ sz = count - c;
+
+ memcpy(buf, sfp_data, sz);
+ buf += SFP_BLOCK_SIZE;
+ c += sz;
+ }
+ phys_addr += SFP_BLOCK_SIZE;
+ sfp_data += SFP_BLOCK_SIZE;
+ offset += SFP_BLOCK_SIZE;
+ }
+
+ return rval;
+}
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index f0605cd..c0f8f6c 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -74,7 +74,7 @@
* ensures no active vp_list traversal while the vport is removed
* from the queue)
*/
- wait_event_timeout(vha->vref_waitq, atomic_read(&vha->vref_count),
+ wait_event_timeout(vha->vref_waitq, !atomic_read(&vha->vref_count),
10*HZ);
spin_lock_irqsave(&ha->vport_slock, flags);
@@ -187,6 +187,11 @@
!(ha->current_topology & ISP_CFG_F)) {
vha->vp_err_state = VP_ERR_PORTDWN;
fc_vport_set_state(vha->fc_vport, FC_VPORT_LINKDOWN);
+ ql_dbg(ql_dbg_taskm, vha, 0x800b,
+ "%s skip enable. loop_state %x topo %x\n",
+ __func__, base_vha->loop_state.counter,
+ ha->current_topology);
+
goto enable_failed;
}
@@ -759,11 +764,18 @@
struct qla_qpair *qpair = container_of(work, struct qla_qpair, q_work);
struct scsi_qla_host *vha;
struct qla_hw_data *ha = qpair->hw;
+ struct srb_iocb *nvme, *nxt_nvme;
spin_lock_irqsave(&qpair->qp_lock, flags);
vha = pci_get_drvdata(ha->pdev);
qla24xx_process_response_queue(vha, qpair->rsp);
spin_unlock_irqrestore(&qpair->qp_lock, flags);
+
+ list_for_each_entry_safe(nvme, nxt_nvme, &qpair->nvme_done_list,
+ u.nvme.entry) {
+ list_del_init(&nvme->u.nvme.entry);
+ qla_nvme_cmpl_io(nvme);
+ }
}
/* create response queue */
diff --git a/drivers/scsi/qla2xxx/qla_mr.c b/drivers/scsi/qla2xxx/qla_mr.c
index 10b742d..e23a3d4 100644
--- a/drivers/scsi/qla2xxx/qla_mr.c
+++ b/drivers/scsi/qla2xxx/qla_mr.c
@@ -1819,6 +1819,10 @@
if (!sp)
goto done;
+ sp->type = SRB_FXIOCB_DCMD;
+ sp->name = "fxdisc";
+ qla2x00_init_timer(sp, FXDISC_TIMEOUT);
+
fdisc = &sp->u.iocb_cmd;
switch (fx_type) {
case FXDISC_GET_CONFIG_INFO:
@@ -1920,9 +1924,6 @@
goto done_unmap_req;
}
- sp->type = SRB_FXIOCB_DCMD;
- sp->name = "fxdisc";
- qla2x00_init_timer(sp, FXDISC_TIMEOUT);
fdisc->timeout = qla2x00_fxdisc_iocb_timeout;
fdisc->u.fxiocb.req_func_type = cpu_to_le16(fx_type);
sp->done = qla2x00_fxdisc_sp_done;
diff --git a/drivers/scsi/qla2xxx/qla_nvme.c b/drivers/scsi/qla2xxx/qla_nvme.c
index f3710a7..1f59e7a 100644
--- a/drivers/scsi/qla2xxx/qla_nvme.c
+++ b/drivers/scsi/qla2xxx/qla_nvme.c
@@ -5,7 +5,6 @@
* See LICENSE.qla2xxx for copyright and licensing details.
*/
#include "qla_nvme.h"
-#include "qla_def.h"
#include <linux/scatterlist.h>
#include <linux/delay.h>
#include <linux/nvme.h>
@@ -15,7 +14,7 @@
static void qla_nvme_unregister_remote_port(struct work_struct *);
-int qla_nvme_register_remote(scsi_qla_host_t *vha, fc_port_t *fcport)
+int qla_nvme_register_remote(struct scsi_qla_host *vha, struct fc_port *fcport)
{
struct nvme_rport *rport;
int ret;
@@ -61,8 +60,8 @@
rport->req.port_id = fcport->d_id.b24;
ql_log(ql_log_info, vha, 0x2102,
- "%s: traddr=pn-0x%016llx:nn-0x%016llx PortID:%06x\n",
- __func__, rport->req.port_name, rport->req.node_name,
+ "%s: traddr=nn-0x%016llx:pn-0x%016llx PortID:%06x\n",
+ __func__, rport->req.node_name, rport->req.port_name,
rport->req.port_id);
ret = nvme_fc_register_remoteport(vha->nvme_local_port, &rport->req,
@@ -76,16 +75,14 @@
fcport->nvme_remote_port->private = fcport;
fcport->nvme_flag |= NVME_FLAG_REGISTERED;
- atomic_set(&fcport->nvme_ref_count, 1);
- init_waitqueue_head(&fcport->nvme_waitQ);
rport->fcport = fcport;
list_add_tail(&rport->list, &vha->nvme_rport_list);
return 0;
}
/* Allocate a queue for NVMe traffic */
-static int qla_nvme_alloc_queue(struct nvme_fc_local_port *lport, unsigned int qidx,
- u16 qsize, void **handle)
+static int qla_nvme_alloc_queue(struct nvme_fc_local_port *lport,
+ unsigned int qidx, u16 qsize, void **handle)
{
struct scsi_qla_host *vha;
struct qla_hw_data *ha;
@@ -157,6 +154,16 @@
qla2x00_rel_sp(sp);
}
+void qla_nvme_cmpl_io(struct srb_iocb *nvme)
+{
+ srb_t *sp;
+ struct nvmefc_fcp_req *fd = nvme->u.nvme.desc;
+
+ sp = container_of(nvme, srb_t, u.iocb_cmd);
+ fd->done(fd);
+ qla2xxx_rel_qpair_sp(sp->qpair, sp);
+}
+
static void qla_nvme_sp_done(void *ptr, int res)
{
srb_t *sp = ptr;
@@ -172,13 +179,14 @@
if (!(sp->fcport->nvme_flag & NVME_FLAG_REGISTERED))
goto rel;
- if (unlikely(nvme->u.nvme.comp_status || res))
- fd->status = -EINVAL;
+ if (unlikely(res == QLA_FUNCTION_FAILED))
+ fd->status = NVME_SC_FC_TRANSPORT_ERROR;
else
fd->status = 0;
fd->rcv_rsplen = nvme->u.nvme.rsp_pyld_len;
- fd->done(fd);
+ list_add_tail(&nvme->u.nvme.entry, &sp->qpair->nvme_done_list);
+ return;
rel:
qla2xxx_rel_qpair_sp(sp->qpair, sp);
}
@@ -193,13 +201,11 @@
struct qla_hw_data *ha = fcport->vha->hw;
rval = ha->isp_ops->abort_command(sp);
- if (rval != QLA_SUCCESS)
- ql_log(ql_log_warn, fcport->vha, 0x2125,
- "%s: failed to abort LS command for SP:%p rval=%x\n",
- __func__, sp, rval);
ql_dbg(ql_dbg_io, fcport->vha, 0x212b,
- "%s: aborted sp:%p on fcport:%p\n", __func__, sp, fcport);
+ "%s: %s LS command for sp=%p on fcport=%p rval=%x\n", __func__,
+ (rval != QLA_SUCCESS) ? "Failed to abort" : "Aborted",
+ sp, fcport, rval);
}
static void qla_nvme_ls_complete(struct work_struct *work)
@@ -214,7 +220,7 @@
static int qla_nvme_ls_req(struct nvme_fc_local_port *lport,
struct nvme_fc_remote_port *rport, struct nvmefc_ls_req *fd)
{
- fc_port_t *fcport = (fc_port_t *)rport->private;
+ fc_port_t *fcport = rport->private;
struct srb_iocb *nvme;
struct nvme_private *priv = fd->private;
struct scsi_qla_host *vha;
@@ -236,7 +242,6 @@
sp->name = "nvme_ls";
sp->done = qla_nvme_sp_ls_done;
atomic_set(&sp->ref_count, 1);
- init_waitqueue_head(&sp->nvme_ls_waitQ);
nvme = &sp->u.iocb_cmd;
priv->sp = sp;
priv->fd = fd;
@@ -258,7 +263,7 @@
ql_log(ql_log_warn, vha, 0x700e,
"qla2x00_start_sp failed = %d\n", rval);
atomic_dec(&sp->ref_count);
- wake_up(&sp->nvme_ls_waitQ);
+ wake_up(&sp->nvme_ls_waitq);
return rval;
}
@@ -276,20 +281,18 @@
struct qla_hw_data *ha = fcport->vha->hw;
rval = ha->isp_ops->abort_command(sp);
- if (!rval)
- ql_log(ql_log_warn, fcport->vha, 0x2127,
- "%s: failed to abort command for SP:%p rval=%x\n",
- __func__, sp, rval);
- ql_dbg(ql_dbg_io, fcport->vha, 0x2126,
- "%s: aborted sp:%p on fcport:%p\n", __func__, sp, fcport);
+ ql_dbg(ql_dbg_io, fcport->vha, 0x2127,
+ "%s: %s command for sp=%p on fcport=%p rval=%x\n", __func__,
+ (rval != QLA_SUCCESS) ? "Failed to abort" : "Aborted",
+ sp, fcport, rval);
}
static void qla_nvme_poll(struct nvme_fc_local_port *lport, void *hw_queue_handle)
{
struct scsi_qla_host *vha = lport->private;
unsigned long flags;
- struct qla_qpair *qpair = (struct qla_qpair *)hw_queue_handle;
+ struct qla_qpair *qpair = hw_queue_handle;
/* Acquire ring specific lock */
spin_lock_irqsave(&qpair->qp_lock, flags);
@@ -310,6 +313,7 @@
uint16_t avail_dsds;
uint32_t *cur_dsd;
struct req_que *req = NULL;
+ struct rsp_que *rsp = NULL;
struct scsi_qla_host *vha = sp->fcport->vha;
struct qla_hw_data *ha = vha->hw;
struct qla_qpair *qpair = sp->qpair;
@@ -318,13 +322,15 @@
struct nvmefc_fcp_req *fd = nvme->u.nvme.desc;
uint32_t rval = QLA_SUCCESS;
- /* Setup qpair pointers */
- req = qpair->req;
tot_dsds = fd->sg_cnt;
/* Acquire qpair specific lock */
spin_lock_irqsave(&qpair->qp_lock, flags);
+ /* Setup qpair pointers */
+ req = qpair->req;
+ rsp = qpair->rsp;
+
/* Check for room in outstanding command list. */
handle = req->current_outstanding_cmd;
for (index = 1; index < req->num_outstanding_cmds; index++) {
@@ -359,7 +365,7 @@
struct nvme_fc_cmd_iu *cmd = fd->cmdaddr;
if (cmd->sqe.common.opcode == nvme_admin_async_event) {
nvme->u.nvme.aen_op = 1;
- atomic_inc(&vha->nvme_active_aen_cnt);
+ atomic_inc(&vha->hw->nvme_active_aen_cnt);
}
}
@@ -472,6 +478,11 @@
/* Set chip new ring index. */
WRT_REG_DWORD(req->req_q_in, req->ring_index);
+ /* Manage unprocessed RIO/ZIO commands in response queue. */
+ if (vha->flags.process_response_queue &&
+ rsp->ring_ptr->signature != RESPONSE_PROCESSED)
+ qla24xx_process_response_queue(vha, rsp);
+
queuing_error:
spin_unlock_irqrestore(&qpair->qp_lock, flags);
return rval;
@@ -487,7 +498,7 @@
struct scsi_qla_host *vha;
int rval = QLA_FUNCTION_FAILED;
srb_t *sp;
- struct qla_qpair *qpair = (struct qla_qpair *)hw_queue_handle;
+ struct qla_qpair *qpair = hw_queue_handle;
struct nvme_private *priv;
if (!fd) {
@@ -496,7 +507,7 @@
}
priv = fd->private;
- fcport = (fc_port_t *)rport->private;
+ fcport = rport->private;
if (!fcport) {
ql_log(ql_log_warn, NULL, 0x210e, "No fcport ptr\n");
return rval;
@@ -512,7 +523,7 @@
return -EIO;
atomic_set(&sp->ref_count, 1);
- init_waitqueue_head(&sp->nvme_ls_waitQ);
+ init_waitqueue_head(&sp->nvme_ls_waitq);
priv->sp = sp;
sp->type = SRB_NVME_CMD;
sp->name = "nvme_cmd";
@@ -526,7 +537,7 @@
ql_log(ql_log_warn, vha, 0x212d,
"qla2x00_start_nvme_mq failed = %d\n", rval);
atomic_dec(&sp->ref_count);
- wake_up(&sp->nvme_ls_waitQ);
+ wake_up(&sp->nvme_ls_waitq);
return -EIO;
}
@@ -537,12 +548,10 @@
{
struct scsi_qla_host *vha = lport->private;
- atomic_dec(&vha->nvme_ref_count);
- wake_up_all(&vha->nvme_waitQ);
-
ql_log(ql_log_info, vha, 0x210f,
"localport delete of %p completed.\n", vha->nvme_local_port);
vha->nvme_local_port = NULL;
+ complete(&vha->nvme_del_done);
}
static void qla_nvme_remoteport_delete(struct nvme_fc_remote_port *rport)
@@ -550,11 +559,9 @@
fc_port_t *fcport;
struct nvme_rport *r_port, *trport;
- fcport = (fc_port_t *)rport->private;
+ fcport = rport->private;
fcport->nvme_remote_port = NULL;
fcport->nvme_flag &= ~NVME_FLAG_REGISTERED;
- atomic_dec(&fcport->nvme_ref_count);
- wake_up_all(&fcport->nvme_waitQ);
list_for_each_entry_safe(r_port, trport,
&fcport->vha->nvme_rport_list, list) {
@@ -564,6 +571,7 @@
}
}
kfree(r_port);
+ complete(&fcport->nvme_del_done);
ql_log(ql_log_info, fcport->vha, 0x2110,
"remoteport_delete of %p completed.\n", fcport);
@@ -594,7 +602,7 @@
{
int ret = QLA_SUCCESS;
- wait_event_timeout(sp->nvme_ls_waitQ, (atomic_read(&sp->ref_count) > 1),
+ wait_event_timeout(sp->nvme_ls_waitq, (atomic_read(&sp->ref_count) > 1),
NVME_ABORT_POLLING_PERIOD*HZ);
if (atomic_read(&sp->ref_count) > 1)
@@ -606,12 +614,11 @@
static int qla_nvme_wait_on_rport_del(fc_port_t *fcport)
{
int ret = QLA_SUCCESS;
+ int timeout;
- wait_event_timeout(fcport->nvme_waitQ,
- atomic_read(&fcport->nvme_ref_count),
- NVME_ABORT_POLLING_PERIOD*HZ);
-
- if (atomic_read(&fcport->nvme_ref_count)) {
+ timeout = wait_for_completion_timeout(&fcport->nvme_del_done,
+ msecs_to_jiffies(2000));
+ if (!timeout) {
ret = QLA_FUNCTION_FAILED;
ql_log(ql_log_info, fcport->vha, 0x2111,
"timed out waiting for fcport=%p to delete\n", fcport);
@@ -620,50 +627,14 @@
return ret;
}
-void qla_nvme_abort(struct qla_hw_data *ha, srb_t *sp)
+void qla_nvme_abort(struct qla_hw_data *ha, struct srb *sp)
{
int rval;
rval = ha->isp_ops->abort_command(sp);
- if (!rval) {
- if (!qla_nvme_wait_on_command(sp))
- ql_log(ql_log_warn, NULL, 0x2112,
- "nvme_wait_on_command timed out waiting on sp=%p\n",
- sp);
- }
-}
-
-static void qla_nvme_abort_all(fc_port_t *fcport)
-{
- int que, cnt;
- unsigned long flags;
- srb_t *sp;
- struct qla_hw_data *ha = fcport->vha->hw;
- struct req_que *req;
-
- spin_lock_irqsave(&ha->hardware_lock, flags);
- for (que = 0; que < ha->max_req_queues; que++) {
- req = ha->req_q_map[que];
- if (!req)
- continue;
- if (!req->outstanding_cmds)
- continue;
- for (cnt = 1; cnt < req->num_outstanding_cmds; cnt++) {
- sp = req->outstanding_cmds[cnt];
- if ((sp) && ((sp->type == SRB_NVME_CMD) ||
- (sp->type == SRB_NVME_LS)) &&
- (sp->fcport == fcport)) {
- atomic_inc(&sp->ref_count);
- spin_unlock_irqrestore(&ha->hardware_lock,
- flags);
- qla_nvme_abort(ha, sp);
- spin_lock_irqsave(&ha->hardware_lock, flags);
- req->outstanding_cmds[cnt] = NULL;
- sp->done(sp, 1);
- }
- }
- }
- spin_unlock_irqrestore(&ha->hardware_lock, flags);
+ if (!rval && !qla_nvme_wait_on_command(sp))
+ ql_log(ql_log_warn, NULL, 0x2112,
+ "nvme_wait_on_comand timed out waiting on sp=%p\n", sp);
}
static void qla_nvme_unregister_remote_port(struct work_struct *work)
@@ -675,18 +646,23 @@
if (!IS_ENABLED(CONFIG_NVME_FC))
return;
+ ql_log(ql_log_warn, NULL, 0x2112,
+ "%s: unregister remoteport on %p\n",__func__, fcport);
+
list_for_each_entry_safe(rport, trport,
&fcport->vha->nvme_rport_list, list) {
if (rport->fcport == fcport) {
ql_log(ql_log_info, fcport->vha, 0x2113,
"%s: fcport=%p\n", __func__, fcport);
+ init_completion(&fcport->nvme_del_done);
nvme_fc_unregister_remoteport(
fcport->nvme_remote_port);
+ qla_nvme_wait_on_rport_del(fcport);
}
}
}
-void qla_nvme_delete(scsi_qla_host_t *vha)
+void qla_nvme_delete(struct scsi_qla_host *vha)
{
struct nvme_rport *rport, *trport;
fc_port_t *fcport;
@@ -701,12 +677,13 @@
ql_log(ql_log_info, fcport->vha, 0x2114, "%s: fcport=%p\n",
__func__, fcport);
+ init_completion(&fcport->nvme_del_done);
nvme_fc_unregister_remoteport(fcport->nvme_remote_port);
qla_nvme_wait_on_rport_del(fcport);
- qla_nvme_abort_all(fcport);
}
if (vha->nvme_local_port) {
+ init_completion(&vha->nvme_del_done);
nv_ret = nvme_fc_unregister_localport(vha->nvme_local_port);
if (nv_ret == 0)
ql_log(ql_log_info, vha, 0x2116,
@@ -715,10 +692,12 @@
else
ql_log(ql_log_info, vha, 0x2115,
"Unregister of localport failed\n");
+ wait_for_completion_timeout(&vha->nvme_del_done,
+ msecs_to_jiffies(5000));
}
}
-void qla_nvme_register_hba(scsi_qla_host_t *vha)
+void qla_nvme_register_hba(struct scsi_qla_host *vha)
{
struct nvme_fc_port_template *tmpl;
struct qla_hw_data *ha;
@@ -744,8 +723,8 @@
pinfo.port_id = vha->d_id.b24;
ql_log(ql_log_info, vha, 0xffff,
- "register_localport: host-traddr=pn-0x%llx:nn-0x%llx on portID:%x\n",
- pinfo.port_name, pinfo.node_name, pinfo.port_id);
+ "register_localport: host-traddr=nn-0x%llx:pn-0x%llx on portID:%x\n",
+ pinfo.node_name, pinfo.port_name, pinfo.port_id);
qla_nvme_fc_transport.dma_boundary = vha->host->dma_boundary;
ret = nvme_fc_register_localport(&pinfo, tmpl,
@@ -755,7 +734,5 @@
"register_localport failed: ret=%x\n", ret);
return;
}
- atomic_set(&vha->nvme_ref_count, 1);
vha->nvme_local_port->private = vha;
- init_waitqueue_head(&vha->nvme_waitQ);
}
diff --git a/drivers/scsi/qla2xxx/qla_nvme.h b/drivers/scsi/qla2xxx/qla_nvme.h
index dfe56f2..7f05fa1 100644
--- a/drivers/scsi/qla2xxx/qla_nvme.h
+++ b/drivers/scsi/qla2xxx/qla_nvme.h
@@ -12,12 +12,18 @@
#include <uapi/scsi/fc/fc_els.h>
#include <linux/nvme-fc-driver.h>
+#include "qla_def.h"
+
#define NVME_ATIO_CMD_OFF 32
#define NVME_FIRST_PACKET_CMDLEN (64 - NVME_ATIO_CMD_OFF)
#define Q2T_NVME_NUM_TAGS 2048
#define QLA_MAX_FC_SEGMENTS 64
+struct scsi_qla_host;
+struct qla_hw_data;
+struct req_que;
struct srb;
+
struct nvme_private {
struct srb *sp;
struct nvmefc_ls_req *fd;
@@ -129,4 +135,15 @@
uint32_t desc_len;
uint32_t payload[3];
};
+
+/*
+ * Global functions prototype in qla_nvme.c source file.
+ */
+void qla_nvme_register_hba(struct scsi_qla_host *);
+int qla_nvme_register_remote(struct scsi_qla_host *, struct fc_port *);
+void qla_nvme_delete(struct scsi_qla_host *);
+void qla_nvme_abort(struct qla_hw_data *, struct srb *sp);
+void qla24xx_nvme_ls4_iocb(struct scsi_qla_host *, struct pt_ls4_request *,
+ struct req_que *);
+void qla24xx_async_gffid_sp_done(void *, int);
#endif
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index df57655..5b2437a 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -113,12 +113,12 @@
"Enables FDMI registrations. "
"0 - no FDMI. Default is 1 - perform FDMI.");
-#define MAX_Q_DEPTH 32
+#define MAX_Q_DEPTH 64
static int ql2xmaxqdepth = MAX_Q_DEPTH;
module_param(ql2xmaxqdepth, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xmaxqdepth,
"Maximum queue depth to set for each LUN. "
- "Default is 32.");
+ "Default is 64.");
#if (IS_ENABLED(CONFIG_NVME_FC))
int ql2xenabledif;
@@ -200,7 +200,7 @@
"Enables GFF_ID checks of port type. "
"Default is 0 - Do not use GFF_ID information.");
-int ql2xasynctmfenable;
+int ql2xasynctmfenable = 1;
module_param(ql2xasynctmfenable, int, S_IRUGO);
MODULE_PARM_DESC(ql2xasynctmfenable,
"Enables issue of TM IOCBs asynchronously via IOCB mechanism"
@@ -262,6 +262,12 @@
"0 (Default). Do not move IOCBs"
"1 - Move IOCBs.");
+int ql2xautodetectsfp = 1;
+module_param(ql2xautodetectsfp, int, 0444);
+MODULE_PARM_DESC(ql2xautodetectsfp,
+ "Detect SFP range and set appropriate distance.\n"
+ "1 (Default): Enable\n");
+
/*
* SCSI host template entry points
*/
@@ -379,6 +385,7 @@
ha->base_qpair->use_shadow_reg = IS_SHADOW_REG_CAPABLE(ha) ? 1 : 0;
ha->base_qpair->msix = &ha->msix_entries[QLA_MSIX_RSP_Q];
INIT_LIST_HEAD(&ha->base_qpair->hints_list);
+ INIT_LIST_HEAD(&ha->base_qpair->nvme_done_list);
ha->base_qpair->enable_class_2 = ql2xenableclass2;
/* init qpair to this cpu. Will adjust at run time. */
qla_cpu_update(rsp->qpair, smp_processor_id());
@@ -710,7 +717,7 @@
}
end:
- if ((sp->type != SRB_NVME_CMD) && (sp->type != SRB_NVME_LS)) {
+ if (sp->type != SRB_NVME_CMD && sp->type != SRB_NVME_LS) {
CMD_SP(cmd) = NULL;
qla2x00_rel_sp(sp);
}
@@ -735,7 +742,7 @@
if (!atomic_dec_and_test(&sp->ref_count))
return;
- qla2x00_sp_free_dma(sp);
+ sp->free(sp);
cmd->scsi_done(cmd);
}
@@ -807,7 +814,7 @@
if (!atomic_dec_and_test(&sp->ref_count))
return;
- qla2xxx_qpair_sp_free_dma(sp);
+ sp->free(sp);
cmd->scsi_done(cmd);
}
@@ -928,7 +935,7 @@
return 0;
qc24_host_busy_free_sp:
- qla2x00_sp_free_dma(sp);
+ sp->free(sp);
qc24_host_busy:
return SCSI_MLQUEUE_HOST_BUSY;
@@ -1017,7 +1024,7 @@
return 0;
qc24_host_busy_free_sp:
- qla2xxx_qpair_sp_free_dma(sp);
+ sp->free(sp);
qc24_host_busy:
return SCSI_MLQUEUE_HOST_BUSY;
@@ -1134,7 +1141,7 @@
{
qla2x00_mark_all_devices_lost(vha, 0);
- wait_event(vha->fcport_waitQ, test_fcport_count(vha));
+ wait_event_timeout(vha->fcport_waitQ, test_fcport_count(vha), 10*HZ);
}
/*
@@ -1715,8 +1722,8 @@
if (sp) {
req->outstanding_cmds[cnt] = NULL;
if (sp->cmd_type == TYPE_SRB) {
- if ((sp->type == SRB_NVME_CMD) ||
- (sp->type == SRB_NVME_LS)) {
+ if (sp->type == SRB_NVME_CMD ||
+ sp->type == SRB_NVME_LS) {
sp_get(sp);
spin_unlock_irqrestore(
&ha->hardware_lock, flags);
@@ -1725,6 +1732,8 @@
&ha->hardware_lock, flags);
} else if (GET_CMD_SP(sp) &&
!ha->flags.eeh_busy &&
+ (!test_bit(ABORT_ISP_ACTIVE,
+ &vha->dpc_flags)) &&
(sp->type == SRB_SCSI_CMD)) {
/*
* Don't abort commands in
@@ -2751,6 +2760,7 @@
spin_lock_init(&ha->tgt.sess_lock);
spin_lock_init(&ha->tgt.atio_lock);
+ atomic_set(&ha->nvme_active_aen_cnt, 0);
/* Clear our data area */
ha->bars = bars;
@@ -3168,7 +3178,7 @@
if (ha->mqenable) {
bool mq = false;
bool startit = false;
- ha->wq = alloc_workqueue("qla2xxx_wq", WQ_MEM_RECLAIM, 1);
+ ha->wq = alloc_workqueue("qla2xxx_wq", WQ_MEM_RECLAIM, 0);
if (QLA_TGT_MODE_ENABLED()) {
mq = true;
@@ -3328,6 +3338,13 @@
if (test_bit(UNLOADING, &base_vha->dpc_flags))
return -ENODEV;
+ if (ha->flags.detected_lr_sfp) {
+ ql_log(ql_log_info, base_vha, 0xffff,
+ "Reset chip to pick up LR SFP setting\n");
+ set_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags);
+ qla2xxx_wake_dpc(base_vha);
+ }
+
return 0;
probe_init_failed:
@@ -3383,12 +3400,22 @@
scsi_qla_host_t *vha;
struct qla_hw_data *ha;
- if (!atomic_read(&pdev->enable_cnt))
- return;
-
vha = pci_get_drvdata(pdev);
ha = vha->hw;
+ ql_log(ql_log_info, vha, 0xfffa,
+ "Adapter shutdown\n");
+
+ /*
+ * Prevent future board_disable and wait
+ * until any pending board_disable has completed.
+ */
+ set_bit(PFLG_DRIVER_REMOVING, &vha->pci_flags);
+ cancel_work_sync(&ha->board_disable);
+
+ if (!atomic_read(&pdev->enable_cnt))
+ return;
+
/* Notify ISPFX00 firmware */
if (IS_QLAFX00(ha))
qlafx00_driver_shutdown(vha, 20);
@@ -3419,8 +3446,9 @@
qla2x00_free_fw_dump(ha);
- pci_disable_pcie_error_reporting(pdev);
pci_disable_device(pdev);
+ ql_log(ql_log_info, vha, 0xfffe,
+ "Adapter shutdown successfully.\n");
}
/* Deletes all the virtual ports for a given ha */
@@ -4006,8 +4034,18 @@
"loop_id_map=%p.\n", ha->loop_id_map);
}
+ ha->sfp_data = dma_alloc_coherent(&ha->pdev->dev,
+ SFP_DEV_SIZE, &ha->sfp_data_dma, GFP_KERNEL);
+ if (!ha->sfp_data) {
+ ql_dbg_pci(ql_dbg_init, ha->pdev, 0x011b,
+ "Unable to allocate memory for SFP read-data.\n");
+ goto fail_sfp_data;
+ }
+
return 0;
+fail_sfp_data:
+ kfree(ha->loop_id_map);
fail_loop_id_map:
dma_pool_free(ha->s_dma_pool, ha->async_pd, ha->async_pd_dma);
fail_async_pd:
@@ -4345,7 +4383,8 @@
ha->ct_sns, ha->ct_sns_dma);
if (ha->sfp_data)
- dma_pool_free(ha->s_dma_pool, ha->sfp_data, ha->sfp_data_dma);
+ dma_free_coherent(&ha->pdev->dev, SFP_DEV_SIZE, ha->sfp_data,
+ ha->sfp_data_dma);
if (ha->ms_iocb)
dma_pool_free(ha->s_dma_pool, ha->ms_iocb, ha->ms_iocb_dma);
@@ -4638,9 +4677,10 @@
void qla24xx_create_new_sess(struct scsi_qla_host *vha, struct qla_work_evt *e)
{
unsigned long flags;
- fc_port_t *fcport = NULL;
+ fc_port_t *fcport = NULL, *tfcp;
struct qlt_plogi_ack_t *pla =
(struct qlt_plogi_ack_t *)e->u.new_sess.pla;
+ uint8_t free_fcport = 0;
spin_lock_irqsave(&vha->hw->tgt.sess_lock, flags);
fcport = qla2x00_find_fcport_by_wwpn(vha, e->u.new_sess.port_name, 1);
@@ -4655,6 +4695,7 @@
pla->ref_count--;
}
} else {
+ spin_unlock_irqrestore(&vha->hw->tgt.sess_lock, flags);
fcport = qla2x00_alloc_fcport(vha, GFP_KERNEL);
if (fcport) {
fcport->d_id = e->u.new_sess.id;
@@ -4664,6 +4705,29 @@
memcpy(fcport->port_name, e->u.new_sess.port_name,
WWN_SIZE);
+ } else {
+ ql_dbg(ql_dbg_disc, vha, 0xffff,
+ "%s %8phC mem alloc fail.\n",
+ __func__, e->u.new_sess.port_name);
+
+ if (pla)
+ kmem_cache_free(qla_tgt_plogi_cachep, pla);
+ return;
+ }
+
+ spin_lock_irqsave(&vha->hw->tgt.sess_lock, flags);
+ /* search again to make sure one else got ahead */
+ tfcp = qla2x00_find_fcport_by_wwpn(vha,
+ e->u.new_sess.port_name, 1);
+ if (tfcp) {
+ /* should rarily happen */
+ ql_dbg(ql_dbg_disc, vha, 0xffff,
+ "%s %8phC found existing fcport b4 add. DS %d LS %d\n",
+ __func__, tfcp->port_name, tfcp->disc_state,
+ tfcp->fw_login_state);
+
+ free_fcport = 1;
+ } else {
list_add_tail(&fcport->list, &vha->vp_fcports);
if (pla) {
@@ -4681,6 +4745,12 @@
else
qla24xx_async_gnl(vha, fcport);
}
+
+ if (free_fcport) {
+ qla2x00_free_fcport(fcport);
+ if (pla)
+ kmem_cache_free(qla_tgt_plogi_cachep, pla);
+ }
}
void
@@ -5493,6 +5563,13 @@
ql_log(ql_log_warn, base_vha, 0x015b,
"Disabling adapter.\n");
+ if (!atomic_read(&pdev->enable_cnt)) {
+ ql_log(ql_log_info, base_vha, 0xfffc,
+ "PCI device disabled, no action req for PCI error=%lx\n",
+ base_vha->pci_flags);
+ return;
+ }
+
qla2x00_wait_for_sess_deletion(base_vha);
set_bit(UNLOADING, &base_vha->dpc_flags);
@@ -5687,6 +5764,16 @@
}
}
+ if (test_and_clear_bit(DETECT_SFP_CHANGE,
+ &base_vha->dpc_flags) &&
+ !test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags)) {
+ qla24xx_detect_sfp(base_vha);
+
+ if (ha->flags.detected_lr_sfp !=
+ ha->flags.using_lr_setting)
+ set_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags);
+ }
+
if (test_and_clear_bit(ISP_ABORT_NEEDED,
&base_vha->dpc_flags)) {
@@ -5828,6 +5915,17 @@
mutex_unlock(&ha->mq_lock);
}
+ if (test_and_clear_bit(SET_ZIO_THRESHOLD_NEEDED, &base_vha->dpc_flags)) {
+ ql_log(ql_log_info, base_vha, 0xffffff,
+ "nvme: SET ZIO Activity exchange threshold to %d.\n",
+ ha->nvme_last_rptd_aen);
+ if (qla27xx_set_zio_threshold(base_vha, ha->nvme_last_rptd_aen)) {
+ ql_log(ql_log_info, base_vha, 0xffffff,
+ "nvme: Unable to SET ZIO Activity exchange threshold to %d.\n",
+ ha->nvme_last_rptd_aen);
+ }
+ }
+
if (!IS_QLAFX00(ha))
qla2x00_do_dpc_all_vps(base_vha);
@@ -6025,12 +6123,15 @@
* FC-NVME
* see if the active AEN count has changed from what was last reported.
*/
- if (atomic_read(&vha->nvme_active_aen_cnt) != vha->nvme_last_rptd_aen) {
- vha->nvme_last_rptd_aen =
- atomic_read(&vha->nvme_active_aen_cnt);
+ if (!vha->vp_idx &&
+ atomic_read(&ha->nvme_active_aen_cnt) != ha->nvme_last_rptd_aen &&
+ ha->zio_mode == QLA_ZIO_MODE_6) {
ql_log(ql_log_info, vha, 0x3002,
- "reporting new aen count of %d to the fw\n",
- vha->nvme_last_rptd_aen);
+ "nvme: Sched: Set ZIO exchange threshold to %d.\n",
+ ha->nvme_last_rptd_aen);
+ ha->nvme_last_rptd_aen = atomic_read(&ha->nvme_active_aen_cnt);
+ set_bit(SET_ZIO_THRESHOLD_NEEDED, &vha->dpc_flags);
+ start_dpc++;
}
/* Schedule the DPC routine if needed */
@@ -6181,6 +6282,12 @@
ql_dbg(ql_dbg_aer, vha, 0x9000,
"PCI error detected, state %x.\n", state);
+ if (!atomic_read(&pdev->enable_cnt)) {
+ ql_log(ql_log_info, vha, 0xffff,
+ "PCI device is disabled,state %x\n", state);
+ return PCI_ERS_RESULT_NEED_RESET;
+ }
+
switch (state) {
case pci_channel_io_normal:
ha->flags.eeh_busy = 0;
@@ -6574,6 +6681,8 @@
strcpy(qla2x00_version_str, QLA2XXX_VERSION);
if (ql2xextended_error_logging)
strcat(qla2x00_version_str, "-debug");
+ if (ql2xextended_error_logging == 1)
+ ql2xextended_error_logging = QL_DBG_DEFAULT1_MASK;
qla2xxx_transport_template =
fc_attach_transport(&qla2xxx_transport_functions);
diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index 986a4270..f05cfc8 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -145,7 +145,7 @@
* Global Variables
*/
static struct kmem_cache *qla_tgt_mgmt_cmd_cachep;
-static struct kmem_cache *qla_tgt_plogi_cachep;
+struct kmem_cache *qla_tgt_plogi_cachep;
static mempool_t *qla_tgt_mgmt_cmd_mempool;
static struct workqueue_struct *qla_tgt_wq;
static DEFINE_MUTEX(qla_tgt_mutex);
@@ -585,11 +585,13 @@
sp->fcport->fw_login_state = DSC_LS_PLOGI_COMP;
sp->fcport->logout_on_delete = 1;
sp->fcport->plogi_nack_done_deadline = jiffies + HZ;
+ sp->fcport->send_els_logo = 0;
break;
case SRB_NACK_PRLI:
sp->fcport->fw_login_state = DSC_LS_PRLI_COMP;
sp->fcport->deleted = 0;
+ sp->fcport->send_els_logo = 0;
if (!sp->fcport->login_succ &&
!IS_SW_RESV_ADDR(sp->fcport->d_id)) {
@@ -1479,7 +1481,7 @@
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf00a,
"Waiting for tgt %p: sess_count=%d\n", tgt, tgt->sess_count);
- wait_event(tgt->waitQ, test_tgt_sess_count(tgt));
+ wait_event_timeout(tgt->waitQ, test_tgt_sess_count(tgt), 10*HZ);
/* Big hammer */
if (!ha->flags.host_shutting_down &&
@@ -1487,7 +1489,7 @@
qlt_disable_vha(vha);
/* Wait for sessions to clear out (just in case) */
- wait_event(tgt->waitQ, test_tgt_sess_count(tgt));
+ wait_event_timeout(tgt->waitQ, test_tgt_sess_count(tgt), 10*HZ);
return 0;
}
EXPORT_SYMBOL(qlt_stop_phase1);
@@ -1528,6 +1530,7 @@
u64 key = 0;
u16 i;
struct qla_qpair_hint *h;
+ struct qla_hw_data *ha = vha->hw;
if ((vha->vha_tgt.qla_tgt != NULL) && !tgt->tgt_stop &&
!tgt->tgt_stopped)
@@ -1548,12 +1551,18 @@
}
}
kfree(tgt->qphints);
+ mutex_lock(&qla_tgt_mutex);
+ list_del(&vha->vha_tgt.qla_tgt->tgt_list_entry);
+ mutex_unlock(&qla_tgt_mutex);
btree_for_each_safe64(&tgt->lun_qpair_map, key, node)
btree_remove64(&tgt->lun_qpair_map, key);
btree_destroy64(&tgt->lun_qpair_map);
+ if (ha->tgt.tgt_ops && ha->tgt.tgt_ops->remove_target)
+ ha->tgt.tgt_ops->remove_target(vha);
+
vha->vha_tgt.qla_tgt = NULL;
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf00d,
@@ -1874,36 +1883,13 @@
struct abts_recv_from_24xx *abts, struct fc_port *sess)
{
struct qla_hw_data *ha = vha->hw;
- struct se_session *se_sess = sess->se_sess;
struct qla_tgt_mgmt_cmd *mcmd;
- struct qla_tgt_cmd *cmd;
- struct se_cmd *se_cmd;
int rc;
- bool found_lun = false;
- unsigned long flags;
- spin_lock_irqsave(&se_sess->sess_cmd_lock, flags);
- list_for_each_entry(se_cmd, &se_sess->sess_cmd_list, se_cmd_list) {
- if (se_cmd->tag == abts->exchange_addr_to_abort) {
- found_lun = true;
- break;
- }
- }
- spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags);
-
- /* cmd not in LIO lists, look in qla list */
- if (!found_lun) {
- if (abort_cmd_for_tag(vha, abts->exchange_addr_to_abort)) {
- /* send TASK_ABORT response immediately */
- qlt_24xx_send_abts_resp(ha->base_qpair, abts,
- FCP_TMF_CMPL, false);
- return 0;
- } else {
- ql_dbg(ql_dbg_tgt_mgt, vha, 0xf081,
- "unable to find cmd in driver or LIO for tag 0x%x\n",
- abts->exchange_addr_to_abort);
- return -ENOENT;
- }
+ if (abort_cmd_for_tag(vha, abts->exchange_addr_to_abort)) {
+ /* send TASK_ABORT response immediately */
+ qlt_24xx_send_abts_resp(ha->base_qpair, abts, FCP_TMF_CMPL, false);
+ return 0;
}
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf00f,
@@ -1919,14 +1905,18 @@
}
memset(mcmd, 0, sizeof(*mcmd));
- cmd = container_of(se_cmd, struct qla_tgt_cmd, se_cmd);
mcmd->sess = sess;
memcpy(&mcmd->orig_iocb.abts, abts, sizeof(mcmd->orig_iocb.abts));
mcmd->reset_count = ha->base_qpair->chip_reset;
mcmd->tmr_func = QLA_TGT_ABTS;
mcmd->qpair = ha->base_qpair;
+ mcmd->vha = vha;
- rc = ha->tgt.tgt_ops->handle_tmr(mcmd, cmd->unpacked_lun, mcmd->tmr_func,
+ /*
+ * LUN is looked up by target-core internally based on the passed
+ * abts->exchange_addr_to_abort tag.
+ */
+ rc = ha->tgt.tgt_ops->handle_tmr(mcmd, 0, mcmd->tmr_func,
abts->exchange_addr_to_abort);
if (rc != 0) {
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf052,
@@ -2023,7 +2013,7 @@
static void qlt_24xx_send_task_mgmt_ctio(struct qla_qpair *qpair,
struct qla_tgt_mgmt_cmd *mcmd, uint32_t resp_code)
{
- struct scsi_qla_host *ha = qpair->vha;
+ struct scsi_qla_host *ha = mcmd->vha;
struct atio_from_isp *atio = &mcmd->orig_iocb.atio;
struct ctio7_to_24xx *ctio;
uint16_t temp;
@@ -3484,6 +3474,9 @@
ql_dbg(ql_dbg_tgt, vha, 0xe009, "Sending TERM EXCH CTIO (ha=%p)\n", ha);
+ if (cmd)
+ vha = cmd->vha;
+
pkt = (request_t *)qla2x00_alloc_iocbs_ready(qpair, NULL);
if (pkt == NULL) {
ql_dbg(ql_dbg_tgt, vha, 0xe050,
@@ -4399,6 +4392,7 @@
mcmd->flags = flags;
mcmd->reset_count = ha->base_qpair->chip_reset;
mcmd->qpair = ha->base_qpair;
+ mcmd->vha = vha;
switch (fn) {
case QLA_TGT_LUN_RESET:
@@ -6190,10 +6184,6 @@
/* free left over qfull cmds */
qlt_init_term_exchange(vha);
- mutex_lock(&qla_tgt_mutex);
- list_del(&vha->vha_tgt.qla_tgt->tgt_list_entry);
- mutex_unlock(&qla_tgt_mutex);
-
ql_dbg(ql_dbg_tgt, vha, 0xe03c, "Unregistering target for host %ld(%p)",
vha->host_no, ha);
qlt_release(vha->vha_tgt.qla_tgt);
@@ -6550,7 +6540,6 @@
/* Adjust ring index */
WRT_REG_DWORD(ISP_ATIO_Q_OUT(vha), ha->tgt.atio_ring_index);
- RD_REG_DWORD_RELAXED(ISP_ATIO_Q_OUT(vha));
}
void
@@ -6816,7 +6805,7 @@
if (!QLA_TGT_MODE_ENABLED())
return;
- if (ha->mqenable || IS_QLA83XX(ha) || IS_QLA27XX(ha)) {
+ if (IS_QLA83XX(ha) || IS_QLA27XX(ha)) {
ISP_ATIO_Q_IN(base_vha) = &ha->mqiobase->isp25mq.atio_q_in;
ISP_ATIO_Q_OUT(base_vha) = &ha->mqiobase->isp25mq.atio_q_out;
} else {
diff --git a/drivers/scsi/qla2xxx/qla_target.h b/drivers/scsi/qla2xxx/qla_target.h
index 7fe02d0..aba58d3 100644
--- a/drivers/scsi/qla2xxx/qla_target.h
+++ b/drivers/scsi/qla2xxx/qla_target.h
@@ -705,6 +705,7 @@
int (*get_dif_tags)(struct qla_tgt_cmd *cmd, uint16_t *pfw_prot_opts);
int (*chk_dif_tags)(uint32_t tag);
void (*add_target)(struct scsi_qla_host *);
+ void (*remove_target)(struct scsi_qla_host *);
};
int qla2x00_wait_for_hba_online(struct scsi_qla_host *);
@@ -959,6 +960,7 @@
uint8_t fc_tm_rsp;
struct fc_port *sess;
struct qla_qpair *qpair;
+ struct scsi_qla_host *vha;
struct se_cmd se_cmd;
struct work_struct free_work;
unsigned int flags;
diff --git a/drivers/scsi/qla2xxx/qla_tmpl.c b/drivers/scsi/qla2xxx/qla_tmpl.c
index b18646d..733e8dc 100644
--- a/drivers/scsi/qla2xxx/qla_tmpl.c
+++ b/drivers/scsi/qla2xxx/qla_tmpl.c
@@ -443,8 +443,12 @@
qla27xx_skip_entry(ent, buf);
}
- if (buf)
- ent->t263.num_queues = count;
+ if (buf) {
+ if (count)
+ ent->t263.num_queues = count;
+ else
+ qla27xx_skip_entry(ent, buf);
+ }
return false;
}
@@ -692,11 +696,12 @@
qla27xx_skip_entry(ent, buf);
}
- if (buf)
- ent->t274.num_queues = count;
-
- if (!count)
- qla27xx_skip_entry(ent, buf);
+ if (buf) {
+ if (count)
+ ent->t274.num_queues = count;
+ else
+ qla27xx_skip_entry(ent, buf);
+ }
return false;
}
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 005a378..8c4b505 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
/*
* Driver version
*/
-#define QLA2XXX_VERSION "10.00.00.00-k"
+#define QLA2XXX_VERSION "10.00.00.01-k"
#define QLA_DRIVER_MAJOR_VER 10
#define QLA_DRIVER_MINOR_VER 0
diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
index c4b4148..b20da0d 100644
--- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c
+++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
@@ -600,11 +600,13 @@
struct fc_port *sess = mcmd->sess;
struct se_cmd *se_cmd = &mcmd->se_cmd;
int transl_tmr_func = 0;
+ int flags = TARGET_SCF_ACK_KREF;
switch (tmr_func) {
case QLA_TGT_ABTS:
pr_debug("%ld: ABTS received\n", sess->vha->host_no);
transl_tmr_func = TMR_ABORT_TASK;
+ flags |= TARGET_SCF_LOOKUP_LUN_FROM_TAG;
break;
case QLA_TGT_2G_ABORT_TASK:
pr_debug("%ld: 2G Abort Task received\n", sess->vha->host_no);
@@ -637,7 +639,7 @@
}
return target_submit_tmr(se_cmd, sess->se_sess, NULL, lun, mcmd,
- transl_tmr_func, GFP_ATOMIC, tag, TARGET_SCF_ACK_KREF);
+ transl_tmr_func, GFP_ATOMIC, tag, flags);
}
static int tcm_qla2xxx_queue_data_in(struct se_cmd *se_cmd)
diff --git a/drivers/scsi/qlogicfas.c b/drivers/scsi/qlogicfas.c
index 840823b..95431d6 100644
--- a/drivers/scsi/qlogicfas.c
+++ b/drivers/scsi/qlogicfas.c
@@ -188,7 +188,7 @@
.info = qlogicfas408_info,
.queuecommand = qlogicfas408_queuecommand,
.eh_abort_handler = qlogicfas408_abort,
- .eh_bus_reset_handler = qlogicfas408_bus_reset,
+ .eh_host_reset_handler = qlogicfas408_host_reset,
.bios_param = qlogicfas408_biosparam,
.can_queue = 1,
.this_id = -1,
diff --git a/drivers/scsi/qlogicfas408.c b/drivers/scsi/qlogicfas408.c
index c3a9151..8b471a9 100644
--- a/drivers/scsi/qlogicfas408.c
+++ b/drivers/scsi/qlogicfas408.c
@@ -496,13 +496,13 @@
return SUCCESS;
}
-/*
+/*
* Reset SCSI bus
* FIXME: This function is invoked with cmd = NULL directly by
* the PCMCIA qlogic_stub code. This wants fixing
*/
-int qlogicfas408_bus_reset(struct scsi_cmnd *cmd)
+int qlogicfas408_host_reset(struct scsi_cmnd *cmd)
{
struct qlogicfas408_priv *priv = get_priv_by_cmd(cmd);
unsigned long flags;
@@ -607,7 +607,7 @@
EXPORT_SYMBOL(qlogicfas408_info);
EXPORT_SYMBOL(qlogicfas408_queuecommand);
EXPORT_SYMBOL(qlogicfas408_abort);
-EXPORT_SYMBOL(qlogicfas408_bus_reset);
+EXPORT_SYMBOL(qlogicfas408_host_reset);
EXPORT_SYMBOL(qlogicfas408_biosparam);
EXPORT_SYMBOL(qlogicfas408_ihandl);
EXPORT_SYMBOL(qlogicfas408_get_chip_type);
diff --git a/drivers/scsi/qlogicfas408.h b/drivers/scsi/qlogicfas408.h
index 2f6c0a1..f6b1216 100644
--- a/drivers/scsi/qlogicfas408.h
+++ b/drivers/scsi/qlogicfas408.h
@@ -108,7 +108,7 @@
struct block_device *dev,
sector_t capacity, int ip[]);
int qlogicfas408_abort(struct scsi_cmnd * cmd);
-int qlogicfas408_bus_reset(struct scsi_cmnd * cmd);
+extern int qlogicfas408_host_reset(struct scsi_cmnd *cmd);
const char *qlogicfas408_info(struct Scsi_Host *host);
int qlogicfas408_get_chip_type(int qbase, int int_type);
void qlogicfas408_setup(int qbase, int id, int int_type);
diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c
index 69bfc0a..cec9a14 100644
--- a/drivers/scsi/qlogicpti.c
+++ b/drivers/scsi/qlogicpti.c
@@ -1283,7 +1283,7 @@
.queuecommand = qlogicpti_queuecommand,
.slave_configure = qlogicpti_slave_configure,
.eh_abort_handler = qlogicpti_abort,
- .eh_bus_reset_handler = qlogicpti_reset,
+ .eh_host_reset_handler = qlogicpti_reset,
.can_queue = QLOGICPTI_REQ_QUEUE_LEN,
.this_id = 7,
.sg_tablesize = QLOGICPTI_MAX_SG(QLOGICPTI_REQ_QUEUE_LEN),
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 1bf274e..a7e4fba 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -412,6 +412,57 @@
EXPORT_SYMBOL_GPL(scsi_get_vpd_page);
/**
+ * scsi_get_vpd_buf - Get Vital Product Data from a SCSI device
+ * @sdev: The device to ask
+ * @page: Which Vital Product Data to return
+ *
+ * Returns %NULL upon failure.
+ */
+static struct scsi_vpd *scsi_get_vpd_buf(struct scsi_device *sdev, u8 page)
+{
+ struct scsi_vpd *vpd_buf;
+ int vpd_len = SCSI_VPD_PG_LEN, result;
+
+retry_pg:
+ vpd_buf = kmalloc(sizeof(*vpd_buf) + vpd_len, GFP_KERNEL);
+ if (!vpd_buf)
+ return NULL;
+
+ result = scsi_vpd_inquiry(sdev, vpd_buf->data, page, vpd_len);
+ if (result < 0) {
+ kfree(vpd_buf);
+ return NULL;
+ }
+ if (result > vpd_len) {
+ vpd_len = result;
+ kfree(vpd_buf);
+ goto retry_pg;
+ }
+
+ vpd_buf->len = result;
+
+ return vpd_buf;
+}
+
+static void scsi_update_vpd_page(struct scsi_device *sdev, u8 page,
+ struct scsi_vpd __rcu **sdev_vpd_buf)
+{
+ struct scsi_vpd *vpd_buf;
+
+ vpd_buf = scsi_get_vpd_buf(sdev, page);
+ if (!vpd_buf)
+ return;
+
+ mutex_lock(&sdev->inquiry_mutex);
+ rcu_swap_protected(*sdev_vpd_buf, vpd_buf,
+ lockdep_is_held(&sdev->inquiry_mutex));
+ mutex_unlock(&sdev->inquiry_mutex);
+
+ if (vpd_buf)
+ kfree_rcu(vpd_buf, rcu);
+}
+
+/**
* scsi_attach_vpd - Attach Vital Product Data to a SCSI device structure
* @sdev: The device to ask
*
@@ -422,95 +473,24 @@
*/
void scsi_attach_vpd(struct scsi_device *sdev)
{
- int result, i;
- int vpd_len = SCSI_VPD_PG_LEN;
- int pg80_supported = 0;
- int pg83_supported = 0;
- unsigned char __rcu *vpd_buf, *orig_vpd_buf = NULL;
+ int i;
+ struct scsi_vpd *vpd_buf;
if (!scsi_device_supports_vpd(sdev))
return;
-retry_pg0:
- vpd_buf = kmalloc(vpd_len, GFP_KERNEL);
+ /* Ask for all the pages supported by this device */
+ vpd_buf = scsi_get_vpd_buf(sdev, 0);
if (!vpd_buf)
return;
- /* Ask for all the pages supported by this device */
- result = scsi_vpd_inquiry(sdev, vpd_buf, 0, vpd_len);
- if (result < 0) {
- kfree(vpd_buf);
- return;
- }
- if (result > vpd_len) {
- vpd_len = result;
- kfree(vpd_buf);
- goto retry_pg0;
- }
-
- for (i = 4; i < result; i++) {
- if (vpd_buf[i] == 0x80)
- pg80_supported = 1;
- if (vpd_buf[i] == 0x83)
- pg83_supported = 1;
+ for (i = 4; i < vpd_buf->len; i++) {
+ if (vpd_buf->data[i] == 0x80)
+ scsi_update_vpd_page(sdev, 0x80, &sdev->vpd_pg80);
+ if (vpd_buf->data[i] == 0x83)
+ scsi_update_vpd_page(sdev, 0x83, &sdev->vpd_pg83);
}
kfree(vpd_buf);
- vpd_len = SCSI_VPD_PG_LEN;
-
- if (pg80_supported) {
-retry_pg80:
- vpd_buf = kmalloc(vpd_len, GFP_KERNEL);
- if (!vpd_buf)
- return;
-
- result = scsi_vpd_inquiry(sdev, vpd_buf, 0x80, vpd_len);
- if (result < 0) {
- kfree(vpd_buf);
- return;
- }
- if (result > vpd_len) {
- vpd_len = result;
- kfree(vpd_buf);
- goto retry_pg80;
- }
- mutex_lock(&sdev->inquiry_mutex);
- orig_vpd_buf = sdev->vpd_pg80;
- sdev->vpd_pg80_len = result;
- rcu_assign_pointer(sdev->vpd_pg80, vpd_buf);
- mutex_unlock(&sdev->inquiry_mutex);
- synchronize_rcu();
- if (orig_vpd_buf) {
- kfree(orig_vpd_buf);
- orig_vpd_buf = NULL;
- }
- vpd_len = SCSI_VPD_PG_LEN;
- }
-
- if (pg83_supported) {
-retry_pg83:
- vpd_buf = kmalloc(vpd_len, GFP_KERNEL);
- if (!vpd_buf)
- return;
-
- result = scsi_vpd_inquiry(sdev, vpd_buf, 0x83, vpd_len);
- if (result < 0) {
- kfree(vpd_buf);
- return;
- }
- if (result > vpd_len) {
- vpd_len = result;
- kfree(vpd_buf);
- goto retry_pg83;
- }
- mutex_lock(&sdev->inquiry_mutex);
- orig_vpd_buf = sdev->vpd_pg83;
- sdev->vpd_pg83_len = result;
- rcu_assign_pointer(sdev->vpd_pg83, vpd_buf);
- mutex_unlock(&sdev->inquiry_mutex);
- synchronize_rcu();
- if (orig_vpd_buf)
- kfree(orig_vpd_buf);
- }
}
/**
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 3be980d..77a0335 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -2261,7 +2261,7 @@
static int resp_log_sense(struct scsi_cmnd * scp,
struct sdebug_dev_info * devip)
{
- int ppc, sp, pcontrol, pcode, subpcode, alloc_len, len, n;
+ int ppc, sp, pcode, subpcode, alloc_len, len, n;
unsigned char arr[SDEBUG_MAX_LSENSE_SZ];
unsigned char *cmd = scp->cmnd;
@@ -2272,7 +2272,6 @@
mk_sense_invalid_fld(scp, SDEB_IN_CDB, 1, ppc ? 1 : 0);
return check_condition_result;
}
- pcontrol = (cmd[2] & 0xc0) >> 6;
pcode = cmd[2] & 0x3f;
subpcode = cmd[3] & 0xff;
alloc_len = get_unaligned_be16(cmd + 7);
diff --git a/drivers/scsi/scsi_debugfs.c b/drivers/scsi/scsi_debugfs.c
index a97c950..5e97550 100644
--- a/drivers/scsi/scsi_debugfs.c
+++ b/drivers/scsi/scsi_debugfs.c
@@ -6,8 +6,10 @@
void scsi_show_rq(struct seq_file *m, struct request *rq)
{
struct scsi_cmnd *cmd = container_of(scsi_req(rq), typeof(*cmd), req);
+ int msecs = jiffies_to_msecs(jiffies - cmd->jiffies_at_alloc);
char buf[80];
__scsi_format_command(buf, sizeof(buf), cmd->cmnd, cmd->cmd_len);
- seq_printf(m, ", .cmd=%s", buf);
+ seq_printf(m, ", .cmd=%s, .retries=%d, allocated %d.%03d s ago", buf,
+ cmd->retries, msecs / 1000, msecs % 1000);
}
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index ea9f40e..3894205 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -259,7 +259,7 @@
*/
enum blk_eh_timer_return scsi_times_out(struct request *req)
{
- struct scsi_cmnd *scmd = req->special;
+ struct scsi_cmnd *scmd = blk_mq_rq_to_pdu(req);
enum blk_eh_timer_return rtn = BLK_EH_NOT_HANDLED;
struct Scsi_Host *host = scmd->device->host;
@@ -552,6 +552,7 @@
set_host_byte(scmd, DID_ALLOC_FAILURE);
return SUCCESS;
}
+ /* FALLTHROUGH */
case COPY_ABORTED:
case VOLUME_OVERFLOW:
case MISCOMPARE:
@@ -573,6 +574,7 @@
return ADD_TO_MLQUEUE;
else
set_host_byte(scmd, DID_TARGET_FAILURE);
+ /* FALLTHROUGH */
case ILLEGAL_REQUEST:
if (sshdr.asc == 0x20 || /* Invalid command operation code */
@@ -683,6 +685,7 @@
switch (status_byte(scmd->result)) {
case GOOD:
scsi_handle_queue_ramp_up(scmd->device);
+ /* FALLTHROUGH */
case COMMAND_TERMINATED:
return SUCCESS;
case CHECK_CONDITION:
@@ -1734,6 +1737,7 @@
set_host_byte(scmd, DID_TIME_OUT);
return SUCCESS;
}
+ /* FALLTHROUGH */
case DID_NO_CONNECT:
case DID_BAD_TARGET:
/*
@@ -1819,6 +1823,7 @@
* the case of trying to send too many commands to a
* tagged queueing device.
*/
+ /* FALLTHROUGH */
case BUSY:
/*
* device can't talk to us at the moment. Should only
@@ -1831,6 +1836,7 @@
if (scmd->cmnd[0] == REPORT_LUNS)
scmd->device->sdev_target->expecting_lun_change = 0;
scsi_handle_queue_ramp_up(scmd->device);
+ /* FALLTHROUGH */
case COMMAND_TERMINATED:
return SUCCESS;
case TASK_ABORTED:
@@ -2320,8 +2326,8 @@
rtn = scsi_try_host_reset(scmd);
if (rtn == SUCCESS)
break;
- default:
/* FALLTHROUGH */
+ default:
rtn = FAILED;
break;
}
diff --git a/drivers/scsi/scsi_ioctl.c b/drivers/scsi/scsi_ioctl.c
index b6bf3f2..0a87549 100644
--- a/drivers/scsi/scsi_ioctl.c
+++ b/drivers/scsi/scsi_ioctl.c
@@ -116,13 +116,15 @@
case NOT_READY: /* This happens if there is no disc in drive */
if (sdev->removable)
break;
+ /* FALLTHROUGH */
case UNIT_ATTENTION:
if (sdev->removable) {
sdev->changed = 1;
result = 0; /* This is no longer considered an error */
break;
}
- default: /* Fall through for non-removable media */
+ /* FALLTHROUGH -- for non-removable media */
+ default:
sdev_printk(KERN_INFO, sdev,
"ioctl_internal_command return code = %x\n",
result);
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index f6097b8..9cf6a80 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -44,6 +44,8 @@
static struct kmem_cache *scsi_sense_isadma_cache;
static DEFINE_MUTEX(scsi_sense_cache_mutex);
+static void scsi_mq_uninit_cmd(struct scsi_cmnd *cmd);
+
static inline struct kmem_cache *
scsi_select_sense_cache(bool unchecked_isa_dma)
{
@@ -140,6 +142,12 @@
{
struct scsi_device *sdev = cmd->device;
+ if (cmd->request->rq_flags & RQF_DONTPREP) {
+ cmd->request->rq_flags &= ~RQF_DONTPREP;
+ scsi_mq_uninit_cmd(cmd);
+ } else {
+ WARN_ON_ONCE(true);
+ }
blk_mq_requeue_request(cmd->request, true);
put_device(&sdev->sdev_gendev);
}
@@ -627,7 +635,7 @@
static bool scsi_end_request(struct request *req, blk_status_t error,
unsigned int bytes, unsigned int bidi_bytes)
{
- struct scsi_cmnd *cmd = req->special;
+ struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(req);
struct scsi_device *sdev = cmd->device;
struct request_queue *q = sdev->request_queue;
@@ -642,6 +650,11 @@
if (blk_queue_add_random(q))
add_disk_randomness(req->rq_disk);
+ if (!blk_rq_is_scsi(req)) {
+ WARN_ON_ONCE(!(cmd->flags & SCMD_INITIALIZED));
+ cmd->flags &= ~SCMD_INITIALIZED;
+ }
+
if (req->mq_ctx) {
/*
* In the MQ case the command gets freed by __blk_mq_end_request,
@@ -977,8 +990,6 @@
* A new command will be prepared and issued.
*/
if (q->mq_ops) {
- cmd->request->rq_flags &= ~RQF_DONTPREP;
- scsi_mq_uninit_cmd(cmd);
scsi_mq_requeue_cmd(cmd);
} else {
scsi_release_buffers(cmd);
@@ -1107,15 +1118,23 @@
EXPORT_SYMBOL(scsi_init_io);
/**
- * scsi_initialize_rq - initialize struct scsi_cmnd.req
+ * scsi_initialize_rq - initialize struct scsi_cmnd partially
+ * @rq: Request associated with the SCSI command to be initialized.
*
- * Called from inside blk_get_request().
+ * This function initializes the members of struct scsi_cmnd that must be
+ * initialized before request processing starts and that won't be
+ * reinitialized if a SCSI command is requeued.
+ *
+ * Called from inside blk_get_request() for pass-through requests and from
+ * inside scsi_init_command() for filesystem requests.
*/
void scsi_initialize_rq(struct request *rq)
{
struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(rq);
scsi_req_init(&cmd->req);
+ cmd->jiffies_at_alloc = jiffies;
+ cmd->retries = 0;
}
EXPORT_SYMBOL(scsi_initialize_rq);
@@ -1153,8 +1172,18 @@
{
void *buf = cmd->sense_buffer;
void *prot = cmd->prot_sdb;
- unsigned int unchecked_isa_dma = cmd->flags & SCMD_UNCHECKED_ISA_DMA;
+ struct request *rq = blk_mq_rq_from_pdu(cmd);
+ unsigned int flags = cmd->flags & SCMD_PRESERVED_FLAGS;
+ unsigned long jiffies_at_alloc;
+ int retries;
+ if (!blk_rq_is_scsi(rq) && !(flags & SCMD_INITIALIZED)) {
+ flags |= SCMD_INITIALIZED;
+ scsi_initialize_rq(rq);
+ }
+
+ jiffies_at_alloc = cmd->jiffies_at_alloc;
+ retries = cmd->retries;
/* zero out the cmd, except for the embedded scsi_request */
memset((char *)cmd + sizeof(cmd->req), 0,
sizeof(*cmd) - sizeof(cmd->req) + dev->host->hostt->cmd_size);
@@ -1162,16 +1191,17 @@
cmd->device = dev;
cmd->sense_buffer = buf;
cmd->prot_sdb = prot;
- cmd->flags = unchecked_isa_dma;
+ cmd->flags = flags;
INIT_DELAYED_WORK(&cmd->abort_work, scmd_eh_abort_handler);
- cmd->jiffies_at_alloc = jiffies;
+ cmd->jiffies_at_alloc = jiffies_at_alloc;
+ cmd->retries = retries;
scsi_add_cmd_to_list(cmd);
}
static int scsi_setup_scsi_cmnd(struct scsi_device *sdev, struct request *req)
{
- struct scsi_cmnd *cmd = req->special;
+ struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(req);
/*
* Passthrough requests may transfer data, in which case they must
@@ -1202,7 +1232,7 @@
*/
static int scsi_setup_fs_cmnd(struct scsi_device *sdev, struct request *req)
{
- struct scsi_cmnd *cmd = req->special;
+ struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(req);
if (unlikely(sdev->handler && sdev->handler->prep_fn)) {
int ret = sdev->handler->prep_fn(sdev, req);
@@ -1217,7 +1247,7 @@
static int scsi_setup_cmnd(struct scsi_device *sdev, struct request *req)
{
- struct scsi_cmnd *cmd = req->special;
+ struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(req);
if (!blk_rq_bytes(req))
cmd->sc_data_direction = DMA_NONE;
@@ -1349,12 +1379,14 @@
ret = scsi_setup_cmnd(sdev, req);
out:
+ if (ret != BLKPREP_OK)
+ cmd->flags &= ~SCMD_INITIALIZED;
return scsi_prep_return(q, req, ret);
}
static void scsi_unprep_fn(struct request_queue *q, struct request *req)
{
- scsi_uninit_cmd(req->special);
+ scsi_uninit_cmd(blk_mq_rq_to_pdu(req));
}
/*
@@ -1545,7 +1577,7 @@
*/
static void scsi_kill_request(struct request *req, struct request_queue *q)
{
- struct scsi_cmnd *cmd = req->special;
+ struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(req);
struct scsi_device *sdev;
struct scsi_target *starget;
struct Scsi_Host *shost;
@@ -1576,7 +1608,7 @@
static void scsi_softirq_done(struct request *rq)
{
- struct scsi_cmnd *cmd = rq->special;
+ struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(rq);
unsigned long wait_for = (cmd->allowed + 1) * rq->timeout;
int disposition;
@@ -1764,8 +1796,8 @@
blk_start_request(req);
spin_unlock_irq(q->queue_lock);
- cmd = req->special;
- if (unlikely(cmd == NULL)) {
+ cmd = blk_mq_rq_to_pdu(req);
+ if (cmd != req->special) {
printk(KERN_CRIT "impossible request in %s.\n"
"please mail a stack trace to "
"linux-scsi@vger.kernel.org\n",
@@ -1868,6 +1900,7 @@
struct scsi_device *sdev = req->q->queuedata;
struct Scsi_Host *shost = sdev->host;
struct scatterlist *sg;
+ int ret;
scsi_init_command(sdev, cmd);
@@ -1901,7 +1934,10 @@
blk_mq_start_request(req);
- return scsi_setup_cmnd(sdev, req);
+ ret = scsi_setup_cmnd(sdev, req);
+ if (ret != BLK_STS_OK)
+ cmd->flags &= ~SCMD_INITIALIZED;
+ return ret;
}
static void scsi_mq_done(struct scsi_cmnd *cmd)
@@ -2001,8 +2037,8 @@
return scsi_times_out(req);
}
-static int scsi_init_request(struct blk_mq_tag_set *set, struct request *rq,
- unsigned int hctx_idx, unsigned int numa_node)
+static int scsi_mq_init_request(struct blk_mq_tag_set *set, struct request *rq,
+ unsigned int hctx_idx, unsigned int numa_node)
{
struct Scsi_Host *shost = set->driver_data;
const bool unchecked_isa_dma = shost->unchecked_isa_dma;
@@ -2026,8 +2062,8 @@
return 0;
}
-static void scsi_exit_request(struct blk_mq_tag_set *set, struct request *rq,
- unsigned int hctx_idx)
+static void scsi_mq_exit_request(struct blk_mq_tag_set *set, struct request *rq,
+ unsigned int hctx_idx)
{
struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(rq);
@@ -2104,7 +2140,8 @@
}
EXPORT_SYMBOL_GPL(__scsi_init_queue);
-static int scsi_init_rq(struct request_queue *q, struct request *rq, gfp_t gfp)
+static int scsi_old_init_rq(struct request_queue *q, struct request *rq,
+ gfp_t gfp)
{
struct Scsi_Host *shost = q->rq_alloc_data;
const bool unchecked_isa_dma = shost->unchecked_isa_dma;
@@ -2134,7 +2171,7 @@
return -ENOMEM;
}
-static void scsi_exit_rq(struct request_queue *q, struct request *rq)
+static void scsi_old_exit_rq(struct request_queue *q, struct request *rq)
{
struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(rq);
@@ -2144,7 +2181,7 @@
cmd->sense_buffer);
}
-struct request_queue *scsi_alloc_queue(struct scsi_device *sdev)
+struct request_queue *scsi_old_alloc_queue(struct scsi_device *sdev)
{
struct Scsi_Host *shost = sdev->host;
struct request_queue *q;
@@ -2155,8 +2192,8 @@
q->cmd_size = sizeof(struct scsi_cmnd) + shost->hostt->cmd_size;
q->rq_alloc_data = shost;
q->request_fn = scsi_request_fn;
- q->init_rq_fn = scsi_init_rq;
- q->exit_rq_fn = scsi_exit_rq;
+ q->init_rq_fn = scsi_old_init_rq;
+ q->exit_rq_fn = scsi_old_exit_rq;
q->initialize_rq_fn = scsi_initialize_rq;
if (blk_init_allocated_queue(q) < 0) {
@@ -2180,8 +2217,8 @@
#ifdef CONFIG_BLK_DEBUG_FS
.show_rq = scsi_show_rq,
#endif
- .init_request = scsi_init_request,
- .exit_request = scsi_exit_request,
+ .init_request = scsi_mq_init_request,
+ .exit_request = scsi_mq_exit_request,
.initialize_rq_fn = scsi_initialize_rq,
.map_queues = scsi_map_queues,
};
@@ -2547,7 +2584,7 @@
* @sdev: scsi device to change the state of.
* @state: state to change to.
*
- * Returns zero if unsuccessful or an error if the requested
+ * Returns zero if successful or an error if the requested
* transition is illegal.
*/
int
@@ -2654,6 +2691,7 @@
}
sdev->sdev_state = state;
+ sysfs_notify(&sdev->sdev_gendev.kobj, NULL, "state");
return 0;
illegal:
@@ -3073,19 +3111,26 @@
* Try to transition the scsi device to SDEV_RUNNING or one of the
* offlined states and goose the device queue if successful.
*/
- if ((sdev->sdev_state == SDEV_BLOCK) ||
- (sdev->sdev_state == SDEV_TRANSPORT_OFFLINE))
+ switch (sdev->sdev_state) {
+ case SDEV_BLOCK:
+ case SDEV_TRANSPORT_OFFLINE:
sdev->sdev_state = new_state;
- else if (sdev->sdev_state == SDEV_CREATED_BLOCK) {
+ sysfs_notify(&sdev->sdev_gendev.kobj, NULL, "state");
+ break;
+ case SDEV_CREATED_BLOCK:
if (new_state == SDEV_TRANSPORT_OFFLINE ||
new_state == SDEV_OFFLINE)
sdev->sdev_state = new_state;
else
sdev->sdev_state = SDEV_CREATED;
- } else if (sdev->sdev_state != SDEV_CANCEL &&
- sdev->sdev_state != SDEV_OFFLINE)
+ sysfs_notify(&sdev->sdev_gendev.kobj, NULL, "state");
+ break;
+ case SDEV_CANCEL:
+ case SDEV_OFFLINE:
+ break;
+ default:
return -EINVAL;
-
+ }
scsi_start_queue(sdev);
return 0;
@@ -3262,8 +3307,8 @@
{
u8 cur_id_type = 0xff;
u8 cur_id_size = 0;
- unsigned char *d, *cur_id_str;
- unsigned char __rcu *vpd_pg83;
+ const unsigned char *d, *cur_id_str;
+ const struct scsi_vpd *vpd_pg83;
int id_size = -EINVAL;
rcu_read_lock();
@@ -3294,8 +3339,8 @@
}
memset(id, 0, id_len);
- d = vpd_pg83 + 4;
- while (d < vpd_pg83 + sdev->vpd_pg83_len) {
+ d = vpd_pg83->data + 4;
+ while (d < vpd_pg83->data + vpd_pg83->len) {
/* Skip designators not referring to the LUN */
if ((d[1] & 0x30) != 0x00)
goto next_desig;
@@ -3411,8 +3456,8 @@
*/
int scsi_vpd_tpg_id(struct scsi_device *sdev, int *rel_id)
{
- unsigned char *d;
- unsigned char __rcu *vpd_pg83;
+ const unsigned char *d;
+ const struct scsi_vpd *vpd_pg83;
int group_id = -EAGAIN, rel_port = -1;
rcu_read_lock();
@@ -3422,8 +3467,8 @@
return -ENXIO;
}
- d = sdev->vpd_pg83 + 4;
- while (d < sdev->vpd_pg83 + sdev->vpd_pg83_len) {
+ d = vpd_pg83->data + 4;
+ while (d < vpd_pg83->data + vpd_pg83->len) {
switch (d[1] & 0xf) {
case 0x4:
/* Relative target port */
diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h
index c11c1f9c..5c6d016 100644
--- a/drivers/scsi/scsi_priv.h
+++ b/drivers/scsi/scsi_priv.h
@@ -88,7 +88,7 @@
extern void scsi_io_completion(struct scsi_cmnd *, unsigned int);
extern void scsi_run_host_queues(struct Scsi_Host *shost);
extern void scsi_requeue_run_queue(struct work_struct *work);
-extern struct request_queue *scsi_alloc_queue(struct scsi_device *sdev);
+extern struct request_queue *scsi_old_alloc_queue(struct scsi_device *sdev);
extern struct request_queue *scsi_mq_alloc_queue(struct scsi_device *sdev);
extern void scsi_start_queue(struct scsi_device *sdev);
extern int scsi_mq_setup_tags(struct Scsi_Host *shost);
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index fd88dab..e7818af 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -268,7 +268,7 @@
if (shost_use_blk_mq(shost))
sdev->request_queue = scsi_mq_alloc_queue(sdev);
else
- sdev->request_queue = scsi_alloc_queue(sdev);
+ sdev->request_queue = scsi_old_alloc_queue(sdev);
if (!sdev->request_queue) {
/* release fn is set up in scsi_sysfs_device_initialise, so
* have to free and put manually here */
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index d6984df..bf53356 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -114,7 +114,7 @@
{
char *last;
- if (strncmp(src, "-", 20) == 0) {
+ if (strcmp(src, "-") == 0) {
*val = SCAN_WILD_CARD;
} else {
/*
@@ -303,6 +303,8 @@
if (sht->host_reset)
ret = sht->host_reset(shost, type);
+ else
+ ret = -EOPNOTSUPP;
exit_store_host_reset:
if (ret == 0)
@@ -426,6 +428,7 @@
struct scsi_device *sdev;
struct device *parent;
struct list_head *this, *tmp;
+ struct scsi_vpd *vpd_pg80 = NULL, *vpd_pg83 = NULL;
unsigned long flags;
sdev = container_of(work, struct scsi_device, ew.work);
@@ -454,8 +457,17 @@
/* NULL queue means the device can't be used */
sdev->request_queue = NULL;
- kfree(sdev->vpd_pg83);
- kfree(sdev->vpd_pg80);
+ mutex_lock(&sdev->inquiry_mutex);
+ rcu_swap_protected(sdev->vpd_pg80, vpd_pg80,
+ lockdep_is_held(&sdev->inquiry_mutex));
+ rcu_swap_protected(sdev->vpd_pg83, vpd_pg83,
+ lockdep_is_held(&sdev->inquiry_mutex));
+ mutex_unlock(&sdev->inquiry_mutex);
+
+ if (vpd_pg83)
+ kfree_rcu(vpd_pg83, rcu);
+ if (vpd_pg80)
+ kfree_rcu(vpd_pg80, rcu);
kfree(sdev->inquiry);
kfree(sdev);
@@ -793,15 +805,16 @@
{ \
struct device *dev = container_of(kobj, struct device, kobj); \
struct scsi_device *sdev = to_scsi_device(dev); \
- int ret; \
- if (!sdev->vpd_##_page) \
- return -EINVAL; \
+ struct scsi_vpd *vpd_page; \
+ int ret = -EINVAL; \
+ \
rcu_read_lock(); \
- ret = memory_read_from_buffer(buf, count, &off, \
- rcu_dereference(sdev->vpd_##_page), \
- sdev->vpd_##_page##_len); \
+ vpd_page = rcu_dereference(sdev->vpd_##_page); \
+ if (vpd_page) \
+ ret = memory_read_from_buffer(buf, count, &off, \
+ vpd_page->data, vpd_page->len); \
rcu_read_unlock(); \
- return ret; \
+ return ret; \
} \
static struct bin_attribute dev_attr_vpd_##_page = { \
.attr = {.name = __stringify(vpd_##_page), .mode = S_IRUGO }, \
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index 892fbd9..3c6bc00 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -3276,8 +3276,8 @@
}
/**
- * fc_block_scsi_eh - Block SCSI eh thread for blocked fc_rport
- * @cmnd: SCSI command that scsi_eh is trying to recover
+ * fc_block_rport() - Block SCSI eh thread for blocked fc_rport.
+ * @rport: Remote port that scsi_eh is trying to recover.
*
* This routine can be called from a FC LLD scsi_eh callback. It
* blocks the scsi_eh thread until the fc_rport leaves the
@@ -3289,10 +3289,9 @@
* FAST_IO_FAIL if the fast_io_fail_tmo fired, this should be
* passed back to scsi_eh.
*/
-int fc_block_scsi_eh(struct scsi_cmnd *cmnd)
+int fc_block_rport(struct fc_rport *rport)
{
- struct Scsi_Host *shost = cmnd->device->host;
- struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device));
+ struct Scsi_Host *shost = rport_to_shost(rport);
unsigned long flags;
spin_lock_irqsave(shost->host_lock, flags);
@@ -3309,6 +3308,28 @@
return 0;
}
+EXPORT_SYMBOL(fc_block_rport);
+
+/**
+ * fc_block_scsi_eh - Block SCSI eh thread for blocked fc_rport
+ * @cmnd: SCSI command that scsi_eh is trying to recover
+ *
+ * This routine can be called from a FC LLD scsi_eh callback. It
+ * blocks the scsi_eh thread until the fc_rport leaves the
+ * FC_PORTSTATE_BLOCKED, or the fast_io_fail_tmo fires. This is
+ * necessary to avoid the scsi_eh failing recovery actions for blocked
+ * rports which would lead to offlined SCSI devices.
+ *
+ * Returns: 0 if the fc_rport left the state FC_PORTSTATE_BLOCKED.
+ * FAST_IO_FAIL if the fast_io_fail_tmo fired, this should be
+ * passed back to scsi_eh.
+ */
+int fc_block_scsi_eh(struct scsi_cmnd *cmnd)
+{
+ struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device));
+
+ return fc_block_rport(rport);
+}
EXPORT_SYMBOL(fc_block_scsi_eh);
/**
@@ -3763,7 +3784,8 @@
snprintf(bsg_name, sizeof(bsg_name),
"fc_host%d", shost->host_no);
- q = bsg_setup_queue(dev, bsg_name, fc_bsg_dispatch, i->f->dd_bsg_size);
+ q = bsg_setup_queue(dev, bsg_name, fc_bsg_dispatch, i->f->dd_bsg_size,
+ NULL);
if (IS_ERR(q)) {
dev_err(dev,
"fc_host%d: bsg interface failed to initialize - setup queue\n",
@@ -3808,7 +3830,8 @@
if (!i->f->bsg_request)
return -ENOTSUPP;
- q = bsg_setup_queue(dev, NULL, fc_bsg_dispatch, i->f->dd_bsg_size);
+ q = bsg_setup_queue(dev, NULL, fc_bsg_dispatch, i->f->dd_bsg_size,
+ NULL);
if (IS_ERR(q)) {
dev_err(dev, "failed to setup bsg queue\n");
return PTR_ERR(q);
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index a424eae..8934f19 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -1009,7 +1009,7 @@
kfree(fnode_sess);
}
-static struct device_type iscsi_flashnode_sess_dev_type = {
+static const struct device_type iscsi_flashnode_sess_dev_type = {
.name = "iscsi_flashnode_sess_dev_type",
.groups = iscsi_flashnode_sess_attr_groups,
.release = iscsi_flashnode_sess_release,
@@ -1195,7 +1195,7 @@
kfree(fnode_conn);
}
-static struct device_type iscsi_flashnode_conn_dev_type = {
+static const struct device_type iscsi_flashnode_conn_dev_type = {
.name = "iscsi_flashnode_conn_dev_type",
.groups = iscsi_flashnode_conn_attr_groups,
.release = iscsi_flashnode_conn_release,
@@ -1542,7 +1542,7 @@
return -ENOTSUPP;
snprintf(bsg_name, sizeof(bsg_name), "iscsi_host%d", shost->host_no);
- q = bsg_setup_queue(dev, bsg_name, iscsi_bsg_host_dispatch, 0);
+ q = bsg_setup_queue(dev, bsg_name, iscsi_bsg_host_dispatch, 0, NULL);
if (IS_ERR(q)) {
shost_printk(KERN_ERR, shost, "bsg interface failed to "
"initialize - no request queue\n");
diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c
index 5006a65..319dff9 100644
--- a/drivers/scsi/scsi_transport_sas.c
+++ b/drivers/scsi/scsi_transport_sas.c
@@ -169,39 +169,22 @@
return rdev;
}
-static void sas_smp_request(struct request_queue *q, struct Scsi_Host *shost,
- struct sas_rphy *rphy)
+static int sas_smp_dispatch(struct bsg_job *job)
{
- struct request *req;
- blk_status_t ret;
- int (*handler)(struct Scsi_Host *, struct sas_rphy *, struct request *);
+ struct Scsi_Host *shost = dev_to_shost(job->dev);
+ struct sas_rphy *rphy = NULL;
- while ((req = blk_fetch_request(q)) != NULL) {
- spin_unlock_irq(q->queue_lock);
+ if (!scsi_is_host_device(job->dev))
+ rphy = dev_to_rphy(job->dev);
- scsi_req(req)->resid_len = blk_rq_bytes(req);
- if (req->next_rq)
- scsi_req(req->next_rq)->resid_len =
- blk_rq_bytes(req->next_rq);
- handler = to_sas_internal(shost->transportt)->f->smp_handler;
- ret = handler(shost, rphy, req);
- scsi_req(req)->result = ret;
-
- blk_end_request_all(req, 0);
-
- spin_lock_irq(q->queue_lock);
+ if (!job->req->next_rq) {
+ dev_warn(job->dev, "space for a smp response is missing\n");
+ bsg_job_done(job, -EINVAL, 0);
+ return 0;
}
-}
-static void sas_host_smp_request(struct request_queue *q)
-{
- sas_smp_request(q, (struct Scsi_Host *)q->queuedata, NULL);
-}
-
-static void sas_non_host_smp_request(struct request_queue *q)
-{
- struct sas_rphy *rphy = q->queuedata;
- sas_smp_request(q, rphy_to_shost(rphy), rphy);
+ to_sas_internal(shost->transportt)->f->smp_handler(job, shost, rphy);
+ return 0;
}
static void sas_host_release(struct device *dev)
@@ -217,81 +200,36 @@
static int sas_bsg_initialize(struct Scsi_Host *shost, struct sas_rphy *rphy)
{
struct request_queue *q;
- int error;
- struct device *dev;
- char namebuf[20];
- const char *name;
- void (*release)(struct device *);
if (!to_sas_internal(shost->transportt)->f->smp_handler) {
printk("%s can't handle SMP requests\n", shost->hostt->name);
return 0;
}
- q = blk_alloc_queue(GFP_KERNEL);
- if (!q)
- return -ENOMEM;
- q->initialize_rq_fn = scsi_initialize_rq;
- q->cmd_size = sizeof(struct scsi_request);
-
if (rphy) {
- q->request_fn = sas_non_host_smp_request;
- dev = &rphy->dev;
- name = dev_name(dev);
- release = NULL;
+ q = bsg_setup_queue(&rphy->dev, dev_name(&rphy->dev),
+ sas_smp_dispatch, 0, NULL);
+ if (IS_ERR(q))
+ return PTR_ERR(q);
+ rphy->q = q;
} else {
- q->request_fn = sas_host_smp_request;
- dev = &shost->shost_gendev;
- snprintf(namebuf, sizeof(namebuf),
- "sas_host%d", shost->host_no);
- name = namebuf;
- release = sas_host_release;
+ char name[20];
+
+ snprintf(name, sizeof(name), "sas_host%d", shost->host_no);
+ q = bsg_setup_queue(&shost->shost_gendev, name,
+ sas_smp_dispatch, 0, sas_host_release);
+ if (IS_ERR(q))
+ return PTR_ERR(q);
+ to_sas_host_attrs(shost)->q = q;
}
- error = blk_init_allocated_queue(q);
- if (error)
- goto out_cleanup_queue;
/*
* by default assume old behaviour and bounce for any highmem page
*/
blk_queue_bounce_limit(q, BLK_BOUNCE_HIGH);
-
- error = bsg_register_queue(q, dev, name, release);
- if (error)
- goto out_cleanup_queue;
-
- if (rphy)
- rphy->q = q;
- else
- to_sas_host_attrs(shost)->q = q;
-
- if (rphy)
- q->queuedata = rphy;
- else
- q->queuedata = shost;
-
queue_flag_set_unlocked(QUEUE_FLAG_BIDI, q);
queue_flag_set_unlocked(QUEUE_FLAG_SCSI_PASSTHROUGH, q);
return 0;
-
-out_cleanup_queue:
- blk_cleanup_queue(q);
- return error;
-}
-
-static void sas_bsg_remove(struct Scsi_Host *shost, struct sas_rphy *rphy)
-{
- struct request_queue *q;
-
- if (rphy)
- q = rphy->q;
- else
- q = to_sas_host_attrs(shost)->q;
-
- if (!q)
- return;
-
- bsg_unregister_queue(q);
}
/*
@@ -321,9 +259,10 @@
struct device *cdev)
{
struct Scsi_Host *shost = dev_to_shost(dev);
+ struct request_queue *q = to_sas_host_attrs(shost)->q;
- sas_bsg_remove(shost, NULL);
-
+ if (q)
+ bsg_unregister_queue(q);
return 0;
}
@@ -421,6 +360,9 @@
char *buffer = kzalloc(vpd_len, GFP_KERNEL);
int ret = 0;
+ if (!buffer)
+ goto out;
+
if (scsi_get_vpd_page(sdev, 0x90, buffer, vpd_len))
goto out;
@@ -1710,7 +1652,8 @@
}
sas_rphy_unlink(rphy);
- sas_bsg_remove(NULL, rphy);
+ if (rphy->q)
+ bsg_unregister_queue(rphy->q);
transport_remove_device(dev);
device_del(dev);
}
diff --git a/drivers/scsi/scsi_transport_srp.c b/drivers/scsi/scsi_transport_srp.c
index f617021..4f6f01c 100644
--- a/drivers/scsi/scsi_transport_srp.c
+++ b/drivers/scsi/scsi_transport_srp.c
@@ -78,7 +78,7 @@
* parameters must be such that multipath can detect failed paths timely.
* Hence do not allow all three parameters to be disabled simultaneously.
*/
-int srp_tmo_valid(int reconnect_delay, int fast_io_fail_tmo, int dev_loss_tmo)
+int srp_tmo_valid(int reconnect_delay, int fast_io_fail_tmo, long dev_loss_tmo)
{
if (reconnect_delay < 0 && fast_io_fail_tmo < 0 && dev_loss_tmo < 0)
return -EINVAL;
@@ -556,8 +556,11 @@
*/
shost_for_each_device(sdev, shost) {
mutex_lock(&sdev->state_mutex);
- if (sdev->sdev_state == SDEV_OFFLINE)
+ if (sdev->sdev_state == SDEV_OFFLINE) {
sdev->sdev_state = SDEV_RUNNING;
+ sysfs_notify(&sdev->sdev_gendev.kobj,
+ NULL, "state");
+ }
mutex_unlock(&sdev->state_mutex);
}
} else if (rport->state == SRP_RPORT_RUNNING) {
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index e2647f2..11c1738 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -312,7 +312,7 @@
if (err)
return err;
- if (val >= 0 && val <= T10_PI_TYPE3_PROTECTION)
+ if (val <= T10_PI_TYPE3_PROTECTION)
sdkp->protection_type = val;
return count;
@@ -1013,7 +1013,7 @@
ret = scsi_init_io(SCpnt);
if (ret != BLKPREP_OK)
goto out;
- SCpnt = rq->special;
+ WARN_ON_ONCE(SCpnt != rq->special);
/* from here on until we're complete, any goto out
* is used for a killable error condition */
@@ -3226,7 +3226,6 @@
gd->major = sd_major((index & 0xf0) >> 4);
gd->first_minor = ((index & 0xf) << 4) | (index & 0xfff00);
- gd->minors = SD_MINORS;
gd->fops = &sd_fops;
gd->private_data = &sdkp->driver;
@@ -3540,7 +3539,7 @@
* doesn't support sync. There's not much to do and
* suspend shouldn't fail.
*/
- ret = 0;
+ ret = 0;
}
}
diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c
index 8927f9f5..11826c5 100644
--- a/drivers/scsi/ses.c
+++ b/drivers/scsi/ses.c
@@ -51,6 +51,13 @@
u64 addr;
};
+static bool ses_page2_supported(struct enclosure_device *edev)
+{
+ struct ses_device *ses_dev = edev->scratch;
+
+ return (ses_dev->page2 != NULL);
+}
+
static int ses_probe(struct device *dev)
{
struct scsi_device *sdev = to_scsi_device(dev);
@@ -179,7 +186,8 @@
unsigned char *type_ptr = ses_dev->page1_types;
unsigned char *desc_ptr = ses_dev->page2 + 8;
- ses_recv_diag(sdev, 2, ses_dev->page2, ses_dev->page2_len);
+ if (ses_recv_diag(sdev, 2, ses_dev->page2, ses_dev->page2_len) < 0)
+ return NULL;
for (i = 0; i < ses_dev->page1_num_types; i++, type_ptr += 4) {
for (j = 0; j < type_ptr[1]; j++) {
@@ -203,6 +211,10 @@
{
unsigned char *desc;
+ if (!ses_page2_supported(edev)) {
+ ecomp->fault = 0;
+ return;
+ }
desc = ses_get_page2_descriptor(edev, ecomp);
if (desc)
ecomp->fault = (desc[3] & 0x60) >> 4;
@@ -215,6 +227,9 @@
unsigned char desc[4];
unsigned char *desc_ptr;
+ if (!ses_page2_supported(edev))
+ return -EINVAL;
+
desc_ptr = ses_get_page2_descriptor(edev, ecomp);
if (!desc_ptr)
@@ -242,6 +257,10 @@
{
unsigned char *desc;
+ if (!ses_page2_supported(edev)) {
+ ecomp->status = 0;
+ return;
+ }
desc = ses_get_page2_descriptor(edev, ecomp);
if (desc)
ecomp->status = (desc[0] & 0x0f);
@@ -252,6 +271,10 @@
{
unsigned char *desc;
+ if (!ses_page2_supported(edev)) {
+ ecomp->locate = 0;
+ return;
+ }
desc = ses_get_page2_descriptor(edev, ecomp);
if (desc)
ecomp->locate = (desc[2] & 0x02) ? 1 : 0;
@@ -264,6 +287,9 @@
unsigned char desc[4];
unsigned char *desc_ptr;
+ if (!ses_page2_supported(edev))
+ return -EINVAL;
+
desc_ptr = ses_get_page2_descriptor(edev, ecomp);
if (!desc_ptr)
@@ -292,6 +318,9 @@
unsigned char desc[4];
unsigned char *desc_ptr;
+ if (!ses_page2_supported(edev))
+ return -EINVAL;
+
desc_ptr = ses_get_page2_descriptor(edev, ecomp);
if (!desc_ptr)
@@ -328,6 +357,11 @@
{
unsigned char *desc;
+ if (!ses_page2_supported(edev)) {
+ ecomp->power_status = 0;
+ return;
+ }
+
desc = ses_get_page2_descriptor(edev, ecomp);
if (desc)
ecomp->power_status = (desc[3] & 0x10) ? 0 : 1;
@@ -340,6 +374,9 @@
unsigned char desc[4];
unsigned char *desc_ptr;
+ if (!ses_page2_supported(edev))
+ return -EINVAL;
+
desc_ptr = ses_get_page2_descriptor(edev, ecomp);
if (!desc_ptr)
@@ -601,7 +638,7 @@
{
struct scsi_device *sdev = to_scsi_device(cdev->parent);
struct scsi_device *tmp_sdev;
- unsigned char *buf = NULL, *hdr_buf, *type_ptr;
+ unsigned char *buf = NULL, *hdr_buf, *type_ptr, page;
struct ses_device *ses_dev;
u32 result;
int i, types, len, components = 0;
@@ -630,7 +667,8 @@
if (!hdr_buf || !ses_dev)
goto err_init_free;
- result = ses_recv_diag(sdev, 1, hdr_buf, INIT_ALLOC_SIZE);
+ page = 1;
+ result = ses_recv_diag(sdev, page, hdr_buf, INIT_ALLOC_SIZE);
if (result)
goto recv_failed;
@@ -639,7 +677,7 @@
if (!buf)
goto err_free;
- result = ses_recv_diag(sdev, 1, buf, len);
+ result = ses_recv_diag(sdev, page, buf, len);
if (result)
goto recv_failed;
@@ -669,9 +707,10 @@
ses_dev->page1_len = len;
buf = NULL;
- result = ses_recv_diag(sdev, 2, hdr_buf, INIT_ALLOC_SIZE);
+ page = 2;
+ result = ses_recv_diag(sdev, page, hdr_buf, INIT_ALLOC_SIZE);
if (result)
- goto recv_failed;
+ goto page2_not_supported;
len = (hdr_buf[2] << 8) + hdr_buf[3] + 4;
buf = kzalloc(len, GFP_KERNEL);
@@ -688,7 +727,8 @@
/* The additional information page --- allows us
* to match up the devices */
- result = ses_recv_diag(sdev, 10, hdr_buf, INIT_ALLOC_SIZE);
+ page = 10;
+ result = ses_recv_diag(sdev, page, hdr_buf, INIT_ALLOC_SIZE);
if (!result) {
len = (hdr_buf[2] << 8) + hdr_buf[3] + 4;
@@ -696,13 +736,14 @@
if (!buf)
goto err_free;
- result = ses_recv_diag(sdev, 10, buf, len);
+ result = ses_recv_diag(sdev, page, buf, len);
if (result)
goto recv_failed;
ses_dev->page10 = buf;
ses_dev->page10_len = len;
buf = NULL;
}
+page2_not_supported:
scomp = kzalloc(sizeof(struct ses_component) * components, GFP_KERNEL);
if (!scomp)
goto err_free;
@@ -734,7 +775,7 @@
recv_failed:
sdev_printk(KERN_ERR, sdev, "Failed to get diagnostic page 0x%x\n",
- result);
+ page);
err = -ENODEV;
err_free:
kfree(buf);
@@ -777,8 +818,6 @@
if (!edev)
return;
- enclosure_unregister(edev);
-
ses_dev = edev->scratch;
edev->scratch = NULL;
@@ -790,6 +829,7 @@
kfree(edev->component[0].scratch);
put_device(&edev->edev);
+ enclosure_unregister(edev);
}
static void ses_intf_remove(struct device *cdev,
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 84e782d..cf0e71d 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -1081,8 +1081,7 @@
return blk_trace_setup(sdp->device->request_queue,
sdp->disk->disk_name,
MKDEV(SCSI_GENERIC_MAJOR, sdp->index),
- NULL,
- (char *)arg);
+ NULL, p);
case BLKTRACESTART:
return blk_trace_startstop(sdp->device->request_queue, 1);
case BLKTRACESTOP:
@@ -1233,6 +1232,7 @@
unsigned long req_sz, len, sa;
Sg_scatter_hold *rsv_schp;
int k, length;
+ int ret = 0;
if ((!filp) || (!vma) || (!(sfp = (Sg_fd *) filp->private_data)))
return -ENXIO;
@@ -1243,8 +1243,11 @@
if (vma->vm_pgoff)
return -EINVAL; /* want no offset */
rsv_schp = &sfp->reserve;
- if (req_sz > rsv_schp->bufflen)
- return -ENOMEM; /* cannot map more than reserved buffer */
+ mutex_lock(&sfp->f_mutex);
+ if (req_sz > rsv_schp->bufflen) {
+ ret = -ENOMEM; /* cannot map more than reserved buffer */
+ goto out;
+ }
sa = vma->vm_start;
length = 1 << (PAGE_SHIFT + rsv_schp->page_order);
@@ -1258,7 +1261,9 @@
vma->vm_flags |= VM_IO | VM_DONTEXPAND | VM_DONTDUMP;
vma->vm_private_data = sfp;
vma->vm_ops = &sg_mmap_vm_ops;
- return 0;
+out:
+ mutex_unlock(&sfp->f_mutex);
+ return ret;
}
static void
@@ -1735,9 +1740,12 @@
!sfp->res_in_use) {
sfp->res_in_use = 1;
sg_link_reserve(sfp, srp, dxfer_len);
- } else if ((hp->flags & SG_FLAG_MMAP_IO) && sfp->res_in_use) {
+ } else if (hp->flags & SG_FLAG_MMAP_IO) {
+ res = -EBUSY; /* sfp->res_in_use == 1 */
+ if (dxfer_len > rsv_schp->bufflen)
+ res = -ENOMEM;
mutex_unlock(&sfp->f_mutex);
- return -EBUSY;
+ return res;
} else {
res = sg_build_indirect(req_schp, sfp, dxfer_len);
if (res) {
diff --git a/drivers/scsi/sgiwd93.c b/drivers/scsi/sgiwd93.c
index 80cfa93..5ed696d 100644
--- a/drivers/scsi/sgiwd93.c
+++ b/drivers/scsi/sgiwd93.c
@@ -192,20 +192,6 @@
hcp->desc.pnext = hdata->dma;
}
-static int sgiwd93_bus_reset(struct scsi_cmnd *cmd)
-{
- /* FIXME perform bus-specific reset */
-
- /* FIXME 2: kill this function, and let midlayer fallback
- to the same result, calling wd33c93_host_reset() */
-
- spin_lock_irq(cmd->device->host->host_lock);
- wd33c93_host_reset(cmd);
- spin_unlock_irq(cmd->device->host->host_lock);
-
- return SUCCESS;
-}
-
/*
* Kludge alert - the SCSI code calls the abort and reset method with int
* arguments not with pointers. So this is going to blow up beautyfully
@@ -217,7 +203,6 @@
.name = "SGI WD93",
.queuecommand = wd33c93_queuecommand,
.eh_abort_handler = wd33c93_abort,
- .eh_bus_reset_handler = sgiwd93_bus_reset,
.eh_host_reset_handler = wd33c93_host_reset,
.can_queue = 16,
.this_id = 7,
diff --git a/drivers/scsi/smartpqi/smartpqi.h b/drivers/scsi/smartpqi/smartpqi.h
index e164ffa..dc3a054 100644
--- a/drivers/scsi/smartpqi/smartpqi.h
+++ b/drivers/scsi/smartpqi/smartpqi.h
@@ -688,6 +688,28 @@
__le32 heartbeat_counter;
};
+union pqi_reset_register {
+ struct {
+ u32 reset_type : 3;
+ u32 reserved : 2;
+ u32 reset_action : 3;
+ u32 hold_in_pd1 : 1;
+ u32 reserved2 : 23;
+ } bits;
+ u32 all_bits;
+};
+
+#define PQI_RESET_ACTION_RESET 0x1
+
+#define PQI_RESET_TYPE_NO_RESET 0x0
+#define PQI_RESET_TYPE_SOFT_RESET 0x1
+#define PQI_RESET_TYPE_FIRM_RESET 0x2
+#define PQI_RESET_TYPE_HARD_RESET 0x3
+
+#define PQI_RESET_ACTION_COMPLETED 0x2
+
+#define PQI_RESET_POLL_INTERVAL_MSECS 100
+
#define PQI_MAX_OUTSTANDING_REQUESTS ((u32)~0)
#define PQI_MAX_OUTSTANDING_REQUESTS_KDUMP 32
#define PQI_MAX_TRANSFER_SIZE (1024U * 1024U)
@@ -995,6 +1017,7 @@
u8 inbound_spanning_supported : 1;
u8 outbound_spanning_supported : 1;
u8 pqi_mode_enabled : 1;
+ u8 pqi_reset_quiesce_supported : 1;
struct list_head scsi_device_list;
spinlock_t scsi_device_list_lock;
@@ -1056,9 +1079,9 @@
#define BMIC_SENSE_CONTROLLER_PARAMETERS 0x64
#define BMIC_SENSE_SUBSYSTEM_INFORMATION 0x66
#define BMIC_WRITE_HOST_WELLNESS 0xa5
-#define BMIC_CACHE_FLUSH 0xc2
+#define BMIC_FLUSH_CACHE 0xc2
-#define SA_CACHE_FLUSH 0x1
+#define SA_FLUSH_CACHE 0x1
#define MASKED_DEVICE(lunid) ((lunid)[3] & 0xc0)
#define CISS_GET_LEVEL_2_BUS(lunid) ((lunid)[7] & 0x3f)
@@ -1164,6 +1187,23 @@
u8 padding_to_multiple_of_512[9];
};
+struct bmic_flush_cache {
+ u8 disable_flag;
+ u8 system_power_action;
+ u8 ndu_flush;
+ u8 shutdown_event;
+ u8 reserved[28];
+};
+
+/* for shutdown_event member of struct bmic_flush_cache */
+enum bmic_flush_cache_shutdown_event {
+ NONE_CACHE_FLUSH_ONLY = 0,
+ SHUTDOWN = 1,
+ HIBERNATE = 2,
+ SUSPEND = 3,
+ RESTART = 4
+};
+
#pragma pack()
int pqi_add_sas_host(struct Scsi_Host *shost, struct pqi_ctrl_info *ctrl_info);
diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index cb8f886..83bdbd8 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -40,11 +40,11 @@
#define BUILD_TIMESTAMP
#endif
-#define DRIVER_VERSION "1.0.4-100"
+#define DRIVER_VERSION "1.1.2-125"
#define DRIVER_MAJOR 1
-#define DRIVER_MINOR 0
-#define DRIVER_RELEASE 4
-#define DRIVER_REVISION 100
+#define DRIVER_MINOR 1
+#define DRIVER_RELEASE 2
+#define DRIVER_REVISION 125
#define DRIVER_NAME "Microsemi PQI Driver (v" \
DRIVER_VERSION BUILD_TIMESTAMP ")"
@@ -431,10 +431,10 @@
cdb[1] = CISS_GET_RAID_MAP;
put_unaligned_be32(buffer_length, &cdb[6]);
break;
- case SA_CACHE_FLUSH:
+ case SA_FLUSH_CACHE:
request->data_direction = SOP_WRITE_FLAG;
cdb[0] = BMIC_WRITE;
- cdb[6] = BMIC_CACHE_FLUSH;
+ cdb[6] = BMIC_FLUSH_CACHE;
put_unaligned_be16(buffer_length, &cdb[7]);
break;
case BMIC_IDENTIFY_CONTROLLER:
@@ -585,14 +585,13 @@
return rc;
}
-#define SA_CACHE_FLUSH_BUFFER_LENGTH 4
-
-static int pqi_flush_cache(struct pqi_ctrl_info *ctrl_info)
+static int pqi_flush_cache(struct pqi_ctrl_info *ctrl_info,
+ enum bmic_flush_cache_shutdown_event shutdown_event)
{
int rc;
struct pqi_raid_path_request request;
int pci_direction;
- u8 *buffer;
+ struct bmic_flush_cache *flush_cache;
/*
* Don't bother trying to flush the cache if the controller is
@@ -601,13 +600,15 @@
if (pqi_ctrl_offline(ctrl_info))
return -ENXIO;
- buffer = kzalloc(SA_CACHE_FLUSH_BUFFER_LENGTH, GFP_KERNEL);
- if (!buffer)
+ flush_cache = kzalloc(sizeof(*flush_cache), GFP_KERNEL);
+ if (!flush_cache)
return -ENOMEM;
+ flush_cache->shutdown_event = shutdown_event;
+
rc = pqi_build_raid_path_request(ctrl_info, &request,
- SA_CACHE_FLUSH, RAID_CTLR_LUNID, buffer,
- SA_CACHE_FLUSH_BUFFER_LENGTH, 0, &pci_direction);
+ SA_FLUSH_CACHE, RAID_CTLR_LUNID, flush_cache,
+ sizeof(*flush_cache), 0, &pci_direction);
if (rc)
goto out;
@@ -618,7 +619,7 @@
pci_direction);
out:
- kfree(buffer);
+ kfree(flush_cache);
return rc;
}
@@ -3007,11 +3008,9 @@
break;
case IRQ_MODE_INTX:
pqi_configure_legacy_intx(ctrl_info, true);
- sis_disable_msix(ctrl_info);
sis_enable_intx(ctrl_info);
break;
case IRQ_MODE_NONE:
- sis_disable_msix(ctrl_info);
break;
}
break;
@@ -3019,14 +3018,12 @@
switch (new_mode) {
case IRQ_MODE_MSIX:
pqi_configure_legacy_intx(ctrl_info, false);
- sis_disable_intx(ctrl_info);
sis_enable_msix(ctrl_info);
break;
case IRQ_MODE_INTX:
break;
case IRQ_MODE_NONE:
pqi_configure_legacy_intx(ctrl_info, false);
- sis_disable_intx(ctrl_info);
break;
}
break;
@@ -5498,6 +5495,7 @@
case XFER_NONE:
case XFER_WRITE:
case XFER_READ:
+ case XFER_READ | XFER_WRITE:
break;
default:
return -EINVAL;
@@ -5538,6 +5536,9 @@
case XFER_READ:
request.data_direction = SOP_READ_FLAG;
break;
+ case XFER_READ | XFER_WRITE:
+ request.data_direction = SOP_BIDIRECTIONAL;
+ break;
}
request.task_attribute = SOP_TASK_ATTRIBUTE_SIMPLE;
@@ -5889,28 +5890,62 @@
scsi_host_put(shost);
}
-#define PQI_RESET_ACTION_RESET 0x1
+static int pqi_wait_for_pqi_reset_completion(struct pqi_ctrl_info *ctrl_info)
+{
+ int rc = 0;
+ struct pqi_device_registers __iomem *pqi_registers;
+ unsigned long timeout;
+ unsigned int timeout_msecs;
+ union pqi_reset_register reset_reg;
-#define PQI_RESET_TYPE_NO_RESET 0x0
-#define PQI_RESET_TYPE_SOFT_RESET 0x1
-#define PQI_RESET_TYPE_FIRM_RESET 0x2
-#define PQI_RESET_TYPE_HARD_RESET 0x3
+ pqi_registers = ctrl_info->pqi_registers;
+ timeout_msecs = readw(&pqi_registers->max_reset_timeout) * 100;
+ timeout = msecs_to_jiffies(timeout_msecs) + jiffies;
+
+ while (1) {
+ msleep(PQI_RESET_POLL_INTERVAL_MSECS);
+ reset_reg.all_bits = readl(&pqi_registers->device_reset);
+ if (reset_reg.bits.reset_action == PQI_RESET_ACTION_COMPLETED)
+ break;
+ pqi_check_ctrl_health(ctrl_info);
+ if (pqi_ctrl_offline(ctrl_info)) {
+ rc = -ENXIO;
+ break;
+ }
+ if (time_after(jiffies, timeout)) {
+ rc = -ETIMEDOUT;
+ break;
+ }
+ }
+
+ return rc;
+}
static int pqi_reset(struct pqi_ctrl_info *ctrl_info)
{
int rc;
- u32 reset_params;
+ union pqi_reset_register reset_reg;
- reset_params = (PQI_RESET_ACTION_RESET << 5) |
- PQI_RESET_TYPE_HARD_RESET;
+ if (ctrl_info->pqi_reset_quiesce_supported) {
+ rc = sis_pqi_reset_quiesce(ctrl_info);
+ if (rc) {
+ dev_err(&ctrl_info->pci_dev->dev,
+ "PQI reset failed during quiesce with error %d\n",
+ rc);
+ return rc;
+ }
+ }
- writel(reset_params,
- &ctrl_info->pqi_registers->device_reset);
+ reset_reg.all_bits = 0;
+ reset_reg.bits.reset_type = PQI_RESET_TYPE_HARD_RESET;
+ reset_reg.bits.reset_action = PQI_RESET_ACTION_RESET;
- rc = pqi_wait_for_pqi_mode_ready(ctrl_info);
+ writel(reset_reg.all_bits, &ctrl_info->pqi_registers->device_reset);
+
+ rc = pqi_wait_for_pqi_reset_completion(ctrl_info);
if (rc)
dev_err(&ctrl_info->pci_dev->dev,
- "PQI reset failed\n");
+ "PQI reset failed with error %d\n", rc);
return rc;
}
@@ -6007,7 +6042,12 @@
rc = pqi_reset(ctrl_info);
if (rc)
return rc;
- sis_reenable_sis_mode(ctrl_info);
+ rc = sis_reenable_sis_mode(ctrl_info);
+ if (rc) {
+ dev_err(&ctrl_info->pci_dev->dev,
+ "re-enabling SIS mode failed with error %d\n", rc);
+ return rc;
+ }
pqi_save_ctrl_mode(ctrl_info, SIS_MODE);
return 0;
@@ -6659,7 +6699,8 @@
* Write all data in the controller's battery-backed cache to
* storage.
*/
- rc = pqi_flush_cache(ctrl_info);
+ rc = pqi_flush_cache(ctrl_info, SHUTDOWN);
+ pqi_reset(ctrl_info);
if (rc == 0)
return;
@@ -6703,7 +6744,7 @@
pqi_cancel_rescan_worker(ctrl_info);
pqi_wait_until_scan_finished(ctrl_info);
pqi_wait_until_lun_reset_finished(ctrl_info);
- pqi_flush_cache(ctrl_info);
+ pqi_flush_cache(ctrl_info, SUSPEND);
pqi_ctrl_block_requests(ctrl_info);
pqi_ctrl_wait_until_quiesced(ctrl_info);
pqi_wait_until_inbound_queues_empty(ctrl_info);
@@ -6781,7 +6822,7 @@
},
{
PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
- PCI_VENDOR_ID_ADAPTEC2, 0x0605)
+ PCI_VENDOR_ID_ADAPTEC2, 0x0608)
},
{
PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
@@ -6813,6 +6854,10 @@
},
{
PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ PCI_VENDOR_ID_ADAPTEC2, 0x0807)
+ },
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
PCI_VENDOR_ID_ADAPTEC2, 0x0900)
},
{
@@ -6849,6 +6894,10 @@
},
{
PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ PCI_VENDOR_ID_ADAPTEC2, 0x090a)
+ },
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
PCI_VENDOR_ID_ADAPTEC2, 0x1200)
},
{
@@ -6881,6 +6930,10 @@
},
{
PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ PCI_VENDOR_ID_DELL, 0x1fe0)
+ },
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
PCI_VENDOR_ID_HP, 0x0600)
},
{
@@ -6897,11 +6950,7 @@
},
{
PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
- PCI_VENDOR_ID_HP, 0x0604)
- },
- {
- PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
- PCI_VENDOR_ID_HP, 0x0606)
+ PCI_VENDOR_ID_HP, 0x0609)
},
{
PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
@@ -6929,14 +6978,6 @@
},
{
PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
- PCI_VENDOR_ID_HP, 0x0656)
- },
- {
- PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
- PCI_VENDOR_ID_HP, 0x0657)
- },
- {
- PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
PCI_VENDOR_ID_HP, 0x0700)
},
{
@@ -6957,14 +6998,6 @@
},
{
PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
- PCI_VENDOR_ID_HP, 0x1102)
- },
- {
- PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
- PCI_VENDOR_ID_HP, 0x1150)
- },
- {
- PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
PCI_ANY_ID, PCI_ANY_ID)
},
{ 0 }
diff --git a/drivers/scsi/smartpqi/smartpqi_sas_transport.c b/drivers/scsi/smartpqi/smartpqi_sas_transport.c
index 0d89d37..b209a35 100644
--- a/drivers/scsi/smartpqi/smartpqi_sas_transport.c
+++ b/drivers/scsi/smartpqi/smartpqi_sas_transport.c
@@ -329,14 +329,6 @@
return -EINVAL;
}
-/* SMP = Serial Management Protocol */
-
-static int pqi_sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
- struct request *req)
-{
- return -EINVAL;
-}
-
struct sas_function_template pqi_sas_transport_functions = {
.get_linkerrors = pqi_sas_get_linkerrors,
.get_enclosure_identifier = pqi_sas_get_enclosure_identifier,
@@ -346,5 +338,4 @@
.phy_setup = pqi_sas_phy_setup,
.phy_release = pqi_sas_phy_release,
.set_phy_speed = pqi_sas_phy_speed,
- .smp_handler = pqi_sas_smp_handler,
};
diff --git a/drivers/scsi/smartpqi/smartpqi_sis.c b/drivers/scsi/smartpqi/smartpqi_sis.c
index e55dfcf..5141bd4 100644
--- a/drivers/scsi/smartpqi/smartpqi_sis.c
+++ b/drivers/scsi/smartpqi/smartpqi_sis.c
@@ -34,11 +34,13 @@
#define SIS_REENABLE_SIS_MODE 0x1
#define SIS_ENABLE_MSIX 0x40
#define SIS_ENABLE_INTX 0x80
-#define SIS_SOFT_RESET 0x100
-#define SIS_TRIGGER_SHUTDOWN 0x800000
#define SIS_CMD_READY 0x200
+#define SIS_TRIGGER_SHUTDOWN 0x800000
+#define SIS_PQI_RESET_QUIESCE 0x1000000
+
#define SIS_CMD_COMPLETE 0x1000
#define SIS_CLEAR_CTRL_TO_HOST_DOORBELL 0x1000
+
#define SIS_CMD_STATUS_SUCCESS 0x1
#define SIS_CMD_COMPLETE_TIMEOUT_SECS 30
#define SIS_CMD_COMPLETE_POLL_INTERVAL_MSECS 10
@@ -47,6 +49,7 @@
#define SIS_EXTENDED_PROPERTIES_SUPPORTED 0x800000
#define SIS_SMARTARRAY_FEATURES_SUPPORTED 0x2
#define SIS_PQI_MODE_SUPPORTED 0x4
+#define SIS_PQI_RESET_QUIESCE_SUPPORTED 0x8
#define SIS_REQUIRED_EXTENDED_PROPERTIES \
(SIS_SMARTARRAY_FEATURES_SUPPORTED | SIS_PQI_MODE_SUPPORTED)
@@ -258,6 +261,9 @@
SIS_REQUIRED_EXTENDED_PROPERTIES)
return -ENODEV;
+ if (extended_properties & SIS_PQI_RESET_QUIESCE_SUPPORTED)
+ ctrl_info->pqi_reset_quiesce_supported = true;
+
return 0;
}
@@ -336,9 +342,10 @@
#define SIS_DOORBELL_BIT_CLEAR_TIMEOUT_SECS 30
-static void sis_wait_for_doorbell_bit_to_clear(
+static int sis_wait_for_doorbell_bit_to_clear(
struct pqi_ctrl_info *ctrl_info, u32 bit)
{
+ int rc = 0;
u32 doorbell_register;
unsigned long timeout;
@@ -350,78 +357,38 @@
if ((doorbell_register & bit) == 0)
break;
if (readl(&ctrl_info->registers->sis_firmware_status) &
- SIS_CTRL_KERNEL_PANIC)
+ SIS_CTRL_KERNEL_PANIC) {
+ rc = -ENODEV;
break;
+ }
if (time_after(jiffies, timeout)) {
dev_err(&ctrl_info->pci_dev->dev,
"doorbell register bit 0x%x not cleared\n",
bit);
+ rc = -ETIMEDOUT;
break;
}
usleep_range(1000, 2000);
}
+
+ return rc;
}
-/* Enable MSI-X interrupts on the controller. */
+static inline int sis_set_doorbell_bit(struct pqi_ctrl_info *ctrl_info, u32 bit)
+{
+ writel(bit, &ctrl_info->registers->sis_host_to_ctrl_doorbell);
+
+ return sis_wait_for_doorbell_bit_to_clear(ctrl_info, bit);
+}
void sis_enable_msix(struct pqi_ctrl_info *ctrl_info)
{
- u32 doorbell_register;
-
- doorbell_register =
- readl(&ctrl_info->registers->sis_host_to_ctrl_doorbell);
- doorbell_register |= SIS_ENABLE_MSIX;
-
- writel(doorbell_register,
- &ctrl_info->registers->sis_host_to_ctrl_doorbell);
-
- sis_wait_for_doorbell_bit_to_clear(ctrl_info, SIS_ENABLE_MSIX);
-}
-
-/* Disable MSI-X interrupts on the controller. */
-
-void sis_disable_msix(struct pqi_ctrl_info *ctrl_info)
-{
- u32 doorbell_register;
-
- doorbell_register =
- readl(&ctrl_info->registers->sis_host_to_ctrl_doorbell);
- doorbell_register &= ~SIS_ENABLE_MSIX;
-
- writel(doorbell_register,
- &ctrl_info->registers->sis_host_to_ctrl_doorbell);
+ sis_set_doorbell_bit(ctrl_info, SIS_ENABLE_MSIX);
}
void sis_enable_intx(struct pqi_ctrl_info *ctrl_info)
{
- u32 doorbell_register;
-
- doorbell_register =
- readl(&ctrl_info->registers->sis_host_to_ctrl_doorbell);
- doorbell_register |= SIS_ENABLE_INTX;
-
- writel(doorbell_register,
- &ctrl_info->registers->sis_host_to_ctrl_doorbell);
-
- sis_wait_for_doorbell_bit_to_clear(ctrl_info, SIS_ENABLE_INTX);
-}
-
-void sis_disable_intx(struct pqi_ctrl_info *ctrl_info)
-{
- u32 doorbell_register;
-
- doorbell_register =
- readl(&ctrl_info->registers->sis_host_to_ctrl_doorbell);
- doorbell_register &= ~SIS_ENABLE_INTX;
-
- writel(doorbell_register,
- &ctrl_info->registers->sis_host_to_ctrl_doorbell);
-}
-
-void sis_soft_reset(struct pqi_ctrl_info *ctrl_info)
-{
- writel(SIS_SOFT_RESET,
- &ctrl_info->registers->sis_host_to_ctrl_doorbell);
+ sis_set_doorbell_bit(ctrl_info, SIS_ENABLE_INTX);
}
void sis_shutdown_ctrl(struct pqi_ctrl_info *ctrl_info)
@@ -434,38 +401,14 @@
&ctrl_info->registers->sis_host_to_ctrl_doorbell);
}
-#define SIS_MODE_READY_TIMEOUT_SECS 30
+int sis_pqi_reset_quiesce(struct pqi_ctrl_info *ctrl_info)
+{
+ return sis_set_doorbell_bit(ctrl_info, SIS_PQI_RESET_QUIESCE);
+}
int sis_reenable_sis_mode(struct pqi_ctrl_info *ctrl_info)
{
- int rc;
- unsigned long timeout;
- struct pqi_ctrl_registers __iomem *registers;
- u32 doorbell;
-
- registers = ctrl_info->registers;
-
- writel(SIS_REENABLE_SIS_MODE,
- ®isters->sis_host_to_ctrl_doorbell);
-
- rc = 0;
- timeout = (SIS_MODE_READY_TIMEOUT_SECS * HZ) + jiffies;
-
- while (1) {
- doorbell = readl(®isters->sis_ctrl_to_host_doorbell);
- if ((doorbell & SIS_REENABLE_SIS_MODE) == 0)
- break;
- if (time_after(jiffies, timeout)) {
- rc = -ETIMEDOUT;
- break;
- }
- }
-
- if (rc)
- dev_err(&ctrl_info->pci_dev->dev,
- "re-enabling SIS mode failed\n");
-
- return rc;
+ return sis_set_doorbell_bit(ctrl_info, SIS_REENABLE_SIS_MODE);
}
void sis_write_driver_scratch(struct pqi_ctrl_info *ctrl_info, u32 value)
diff --git a/drivers/scsi/smartpqi/smartpqi_sis.h b/drivers/scsi/smartpqi/smartpqi_sis.h
index 983184b..2bf889d 100644
--- a/drivers/scsi/smartpqi/smartpqi_sis.h
+++ b/drivers/scsi/smartpqi/smartpqi_sis.h
@@ -27,11 +27,9 @@
int sis_get_pqi_capabilities(struct pqi_ctrl_info *ctrl_info);
int sis_init_base_struct_addr(struct pqi_ctrl_info *ctrl_info);
void sis_enable_msix(struct pqi_ctrl_info *ctrl_info);
-void sis_disable_msix(struct pqi_ctrl_info *ctrl_info);
void sis_enable_intx(struct pqi_ctrl_info *ctrl_info);
-void sis_disable_intx(struct pqi_ctrl_info *ctrl_info);
-void sis_soft_reset(struct pqi_ctrl_info *ctrl_info);
void sis_shutdown_ctrl(struct pqi_ctrl_info *ctrl_info);
+int sis_pqi_reset_quiesce(struct pqi_ctrl_info *ctrl_info);
int sis_reenable_sis_mode(struct pqi_ctrl_info *ctrl_info);
void sis_write_driver_scratch(struct pqi_ctrl_info *ctrl_info, u32 value);
u32 sis_read_driver_scratch(struct pqi_ctrl_info *ctrl_info);
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index a8f6302..9be34d3 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -393,7 +393,7 @@
ret = scsi_init_io(SCpnt);
if (ret != BLKPREP_OK)
goto out;
- SCpnt = rq->special;
+ WARN_ON_ONCE(SCpnt != rq->special);
cd = scsi_cd(rq->rq_disk);
/* from here on until we're complete, any goto out
diff --git a/drivers/scsi/sun3_scsi.c b/drivers/scsi/sun3_scsi.c
index e64b0c5..9492638 100644
--- a/drivers/scsi/sun3_scsi.c
+++ b/drivers/scsi/sun3_scsi.c
@@ -46,7 +46,7 @@
#define NCR5380_write(reg, value) out_8(hostdata->io + (reg), value)
#define NCR5380_queue_command sun3scsi_queue_command
-#define NCR5380_bus_reset sun3scsi_bus_reset
+#define NCR5380_host_reset sun3scsi_host_reset
#define NCR5380_abort sun3scsi_abort
#define NCR5380_info sun3scsi_info
@@ -495,7 +495,7 @@
.info = sun3scsi_info,
.queuecommand = sun3scsi_queue_command,
.eh_abort_handler = sun3scsi_abort,
- .eh_bus_reset_handler = sun3scsi_bus_reset,
+ .eh_host_reset_handler = sun3scsi_host_reset,
.can_queue = 16,
.this_id = 7,
.sg_tablesize = SG_NONE,
diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c
index 6b349e3..15ff285a9 100644
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.c
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c
@@ -759,7 +759,7 @@
/*
* Maximum synchronous period factor supported by the chip.
*/
- period = (11 * div_10M[np->clock_divn - 1]) / (4 * np->clock_khz);
+ period = div64_ul(11 * div_10M[np->clock_divn - 1], 4 * np->clock_khz);
np->maxsync = period > 2540 ? 254 : period / 10;
/*
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 5bc9dc1..794a460 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -438,7 +438,7 @@
{
dev_err(hba->dev, "UFS Host state=%d\n", hba->ufshcd_state);
dev_err(hba->dev, "lrb in use=0x%lx, outstanding reqs=0x%lx tasks=0x%lx\n",
- hba->lrb_in_use, hba->outstanding_tasks, hba->outstanding_reqs);
+ hba->lrb_in_use, hba->outstanding_reqs, hba->outstanding_tasks);
dev_err(hba->dev, "saved_err=0x%x, saved_uic_err=0x%x\n",
hba->saved_err, hba->saved_uic_err);
dev_err(hba->dev, "Device power mode=%d, UIC link state=%d\n",
diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c
index 9be211d..7c28e8d 100644
--- a/drivers/scsi/virtio_scsi.c
+++ b/drivers/scsi/virtio_scsi.c
@@ -818,7 +818,6 @@
.eh_timed_out = virtscsi_eh_timed_out,
.slave_alloc = virtscsi_device_alloc,
- .can_queue = 1024,
.dma_boundary = UINT_MAX,
.use_clustering = ENABLE_CLUSTERING,
.target_alloc = virtscsi_target_alloc,
@@ -839,7 +838,6 @@
.eh_timed_out = virtscsi_eh_timed_out,
.slave_alloc = virtscsi_device_alloc,
- .can_queue = 1024,
.dma_boundary = UINT_MAX,
.use_clustering = ENABLE_CLUSTERING,
.target_alloc = virtscsi_target_alloc,
@@ -972,6 +970,8 @@
if (err)
goto virtscsi_init_failed;
+ shost->can_queue = virtqueue_get_vring_size(vscsi->req_vqs[0].vq);
+
cmd_per_lun = virtscsi_config_get(vdev, cmd_per_lun) ?: 1;
shost->cmd_per_lun = min_t(u32, cmd_per_lun, shost->can_queue);
shost->max_sectors = virtscsi_config_get(vdev, max_sectors) ?: 0xFFFF;
diff --git a/drivers/scsi/wd33c93.c b/drivers/scsi/wd33c93.c
index 9e09da4..74be04f 100644
--- a/drivers/scsi/wd33c93.c
+++ b/drivers/scsi/wd33c93.c
@@ -1578,6 +1578,7 @@
int i;
instance = SCpnt->device->host;
+ spin_lock_irq(instance->host_lock);
hostdata = (struct WD33C93_hostdata *) instance->hostdata;
printk("scsi%d: reset. ", instance->host_no);
@@ -1603,6 +1604,7 @@
reset_wd33c93(instance);
SCpnt->result = DID_RESET << 16;
enable_irq(instance->irq);
+ spin_unlock_irq(instance->host_lock);
return SUCCESS;
}
diff --git a/drivers/soc/zte/Kconfig b/drivers/soc/zte/Kconfig
index 20bde38..e9d750c 100644
--- a/drivers/soc/zte/Kconfig
+++ b/drivers/soc/zte/Kconfig
@@ -2,6 +2,7 @@
# ZTE SoC drivers
#
menuconfig SOC_ZTE
+ depends on ARCH_ZX || COMPILE_TEST
bool "ZTE SoC driver support"
if SOC_ZTE
diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
index 2afe359..f4b7a98 100644
--- a/drivers/spmi/spmi-pmic-arb.c
+++ b/drivers/spmi/spmi-pmic-arb.c
@@ -134,7 +134,6 @@
* @spmic: SPMI controller object
* @ver_ops: version dependent operations.
* @ppid_to_apid in-memory copy of PPID -> channel (APID) mapping table.
- * v2 only.
*/
struct spmi_pmic_arb {
void __iomem *rd_base;
@@ -1016,6 +1015,13 @@
goto err_put_ctrl;
}
+ pa->ppid_to_apid = devm_kcalloc(&ctrl->dev, PMIC_ARB_MAX_PPID,
+ sizeof(*pa->ppid_to_apid), GFP_KERNEL);
+ if (!pa->ppid_to_apid) {
+ err = -ENOMEM;
+ goto err_put_ctrl;
+ }
+
hw_ver = readl_relaxed(core + PMIC_ARB_VERSION);
if (hw_ver < PMIC_ARB_VERSION_V2_MIN) {
@@ -1048,15 +1054,6 @@
err = PTR_ERR(pa->wr_base);
goto err_put_ctrl;
}
-
- pa->ppid_to_apid = devm_kcalloc(&ctrl->dev,
- PMIC_ARB_MAX_PPID,
- sizeof(*pa->ppid_to_apid),
- GFP_KERNEL);
- if (!pa->ppid_to_apid) {
- err = -ENOMEM;
- goto err_put_ctrl;
- }
}
dev_info(&ctrl->dev, "PMIC arbiter version %s (0x%x)\n",
diff --git a/drivers/spmi/spmi.c b/drivers/spmi/spmi.c
index 2b9b094..6d23226 100644
--- a/drivers/spmi/spmi.c
+++ b/drivers/spmi/spmi.c
@@ -365,11 +365,23 @@
return 0;
}
+static int spmi_drv_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+ int ret;
+
+ ret = of_device_uevent_modalias(dev, env);
+ if (ret != -ENODEV)
+ return ret;
+
+ return 0;
+}
+
static struct bus_type spmi_bus_type = {
.name = "spmi",
.match = spmi_device_match,
.probe = spmi_drv_probe,
.remove = spmi_drv_remove,
+ .uevent = spmi_drv_uevent,
};
/**
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 268d4e6..ef28a1c 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -110,4 +110,6 @@
source "drivers/staging/typec/Kconfig"
+source "drivers/staging/vboxvideo/Kconfig"
+
endif # STAGING
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index b93e6f5..2918580 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -44,3 +44,4 @@
obj-$(CONFIG_GREYBUS) += greybus/
obj-$(CONFIG_BCM2835_VCHIQ) += vc04_services/
obj-$(CONFIG_CRYPTO_DEV_CCREE) += ccree/
+obj-$(CONFIG_DRM_VBOXVIDEO) += vboxvideo/
diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c
index b2e3828..2f7bfc1 100644
--- a/drivers/staging/comedi/drivers/ni_mio_common.c
+++ b/drivers/staging/comedi/drivers/ni_mio_common.c
@@ -3116,8 +3116,7 @@
/* following line: 2-1 per STC */
ni_stc_writel(dev, 1, NISTC_AO_UI_LOADA_REG);
ni_stc_writew(dev, NISTC_AO_CMD1_UI_LOAD, NISTC_AO_CMD1_REG);
- /* following line: N-1 per STC */
- ni_stc_writel(dev, trigvar - 1, NISTC_AO_UI_LOADA_REG);
+ ni_stc_writel(dev, trigvar, NISTC_AO_UI_LOADA_REG);
} else { /* TRIG_EXT */
/* FIXME: assert scan_begin_arg != 0, ret failure otherwise */
devpriv->ao_cmd2 |= NISTC_AO_CMD2_BC_GATE_ENA;
diff --git a/drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c b/drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c
index 85b242e..8fc191d 100644
--- a/drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c
+++ b/drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c
@@ -1640,8 +1640,13 @@
ibmsg = tx->tx_msg;
ibmsg->ibm_u.immediate.ibim_hdr = *hdr;
- copy_from_iter(&ibmsg->ibm_u.immediate.ibim_payload, IBLND_MSG_SIZE,
- &from);
+ rc = copy_from_iter(&ibmsg->ibm_u.immediate.ibim_payload, payload_nob,
+ &from);
+ if (rc != payload_nob) {
+ kiblnd_pool_free_node(&tx->tx_pool->tpo_pool, &tx->tx_list);
+ return -EFAULT;
+ }
+
nob = offsetof(struct kib_immediate_msg, ibim_payload[payload_nob]);
kiblnd_init_tx_msg(ni, tx, IBLND_MSG_IMMEDIATE, nob);
@@ -1741,8 +1746,14 @@
break;
}
- copy_to_iter(&rxmsg->ibm_u.immediate.ibim_payload,
- IBLND_MSG_SIZE, to);
+ rc = copy_to_iter(&rxmsg->ibm_u.immediate.ibim_payload, rlen,
+ to);
+ if (rc != rlen) {
+ rc = -EFAULT;
+ break;
+ }
+
+ rc = 0;
lnet_finalize(ni, lntmsg, 0);
break;
diff --git a/drivers/staging/media/atomisp/i2c/ap1302.h b/drivers/staging/media/atomisp/i2c/ap1302.h
index 9341232..4d0b181 100644
--- a/drivers/staging/media/atomisp/i2c/ap1302.h
+++ b/drivers/staging/media/atomisp/i2c/ap1302.h
@@ -158,8 +158,8 @@
};
struct ap1302_context_res {
- s32 res_num;
- s32 cur_res;
+ u32 res_num;
+ u32 cur_res;
struct ap1302_res_struct *res_table;
};
diff --git a/drivers/staging/media/atomisp/i2c/gc0310.h b/drivers/staging/media/atomisp/i2c/gc0310.h
index f31eb27..7d8a0ae 100644
--- a/drivers/staging/media/atomisp/i2c/gc0310.h
+++ b/drivers/staging/media/atomisp/i2c/gc0310.h
@@ -454,6 +454,6 @@
#define N_RES_VIDEO (ARRAY_SIZE(gc0310_res_video))
static struct gc0310_resolution *gc0310_res = gc0310_res_preview;
-static int N_RES = N_RES_PREVIEW;
+static unsigned long N_RES = N_RES_PREVIEW;
#endif
diff --git a/drivers/staging/media/atomisp/i2c/gc2235.h b/drivers/staging/media/atomisp/i2c/gc2235.h
index ccbc757..7c3d9941 100644
--- a/drivers/staging/media/atomisp/i2c/gc2235.h
+++ b/drivers/staging/media/atomisp/i2c/gc2235.h
@@ -668,5 +668,5 @@
#define N_RES_VIDEO (ARRAY_SIZE(gc2235_res_video))
static struct gc2235_resolution *gc2235_res = gc2235_res_preview;
-static int N_RES = N_RES_PREVIEW;
+static unsigned long N_RES = N_RES_PREVIEW;
#endif
diff --git a/drivers/staging/media/atomisp/i2c/imx/imx.h b/drivers/staging/media/atomisp/i2c/imx/imx.h
index 36b3f3a..41b4133 100644
--- a/drivers/staging/media/atomisp/i2c/imx/imx.h
+++ b/drivers/staging/media/atomisp/i2c/imx/imx.h
@@ -480,7 +480,7 @@
struct imx_vcm *vcm_driver;
struct imx_otp *otp_driver;
const struct imx_resolution *curr_res_table;
- int entries_curr_table;
+ unsigned long entries_curr_table;
const struct firmware *fw;
struct imx_reg_addr *reg_addr;
const struct imx_reg *param_hold;
diff --git a/drivers/staging/media/atomisp/i2c/ov2680.h b/drivers/staging/media/atomisp/i2c/ov2680.h
index 944fe8e..ab8907e 100644
--- a/drivers/staging/media/atomisp/i2c/ov2680.h
+++ b/drivers/staging/media/atomisp/i2c/ov2680.h
@@ -934,7 +934,6 @@
#define N_RES_VIDEO (ARRAY_SIZE(ov2680_res_video))
static struct ov2680_resolution *ov2680_res = ov2680_res_preview;
-static int N_RES = N_RES_PREVIEW;
-
+static unsigned long N_RES = N_RES_PREVIEW;
#endif
diff --git a/drivers/staging/media/atomisp/i2c/ov2722.h b/drivers/staging/media/atomisp/i2c/ov2722.h
index b0d4096..73ecb16 100644
--- a/drivers/staging/media/atomisp/i2c/ov2722.h
+++ b/drivers/staging/media/atomisp/i2c/ov2722.h
@@ -1263,5 +1263,5 @@
#define N_RES_VIDEO (ARRAY_SIZE(ov2722_res_video))
static struct ov2722_resolution *ov2722_res = ov2722_res_preview;
-static int N_RES = N_RES_PREVIEW;
+static unsigned long N_RES = N_RES_PREVIEW;
#endif
diff --git a/drivers/staging/media/atomisp/i2c/ov5693/ov5693.h b/drivers/staging/media/atomisp/i2c/ov5693/ov5693.h
index d88ac17..8c2e679 100644
--- a/drivers/staging/media/atomisp/i2c/ov5693/ov5693.h
+++ b/drivers/staging/media/atomisp/i2c/ov5693/ov5693.h
@@ -1377,5 +1377,5 @@
#define N_RES_VIDEO (ARRAY_SIZE(ov5693_res_video))
static struct ov5693_resolution *ov5693_res = ov5693_res_preview;
-static int N_RES = N_RES_PREVIEW;
+static unsigned long N_RES = N_RES_PREVIEW;
#endif
diff --git a/drivers/staging/media/atomisp/i2c/ov8858.h b/drivers/staging/media/atomisp/i2c/ov8858.h
index 9be6a0e..d3fde20 100644
--- a/drivers/staging/media/atomisp/i2c/ov8858.h
+++ b/drivers/staging/media/atomisp/i2c/ov8858.h
@@ -266,7 +266,7 @@
const struct ov8858_reg *regs;
struct ov8858_vcm *vcm_driver;
const struct ov8858_resolution *curr_res_table;
- int entries_curr_table;
+ unsigned long entries_curr_table;
struct v4l2_ctrl_handler ctrl_handler;
struct v4l2_ctrl *run_mode;
diff --git a/drivers/staging/media/atomisp/i2c/ov8858_btns.h b/drivers/staging/media/atomisp/i2c/ov8858_btns.h
index 09e3cdc..f9a3cf8 100644
--- a/drivers/staging/media/atomisp/i2c/ov8858_btns.h
+++ b/drivers/staging/media/atomisp/i2c/ov8858_btns.h
@@ -266,7 +266,7 @@
const struct ov8858_reg *regs;
struct ov8858_vcm *vcm_driver;
const struct ov8858_resolution *curr_res_table;
- int entries_curr_table;
+ unsigned long entries_curr_table;
struct v4l2_ctrl_handler ctrl_handler;
struct v4l2_ctrl *run_mode;
diff --git a/drivers/staging/media/atomisp/pci/atomisp2/Makefile b/drivers/staging/media/atomisp/pci/atomisp2/Makefile
index 726eaa2..2bd98f0 100644
--- a/drivers/staging/media/atomisp/pci/atomisp2/Makefile
+++ b/drivers/staging/media/atomisp/pci/atomisp2/Makefile
@@ -354,7 +354,9 @@
# HACK! While this driver is in bad shape, don't enable several warnings
# that would be otherwise enabled with W=1
-ccflags-y += -Wno-unused-const-variable -Wno-missing-prototypes \
- -Wno-unused-but-set-variable -Wno-missing-declarations \
- -Wno-suggest-attribute=format -Wno-missing-prototypes \
- -Wno-implicit-fallthrough
+ccflags-y += $(call cc-disable-warning, implicit-fallthrough)
+ccflags-y += $(call cc-disable-warning, missing-prototypes)
+ccflags-y += $(call cc-disable-warning, missing-declarations)
+ccflags-y += $(call cc-disable-warning, suggest-attribute=format)
+ccflags-y += $(call cc-disable-warning, unused-const-variable)
+ccflags-y += $(call cc-disable-warning, unused-but-set-variable)
diff --git a/drivers/staging/media/atomisp/pci/atomisp2/atomisp_internal.h b/drivers/staging/media/atomisp/pci/atomisp2/atomisp_internal.h
index d366713..c8e0c4f 100644
--- a/drivers/staging/media/atomisp/pci/atomisp2/atomisp_internal.h
+++ b/drivers/staging/media/atomisp/pci/atomisp2/atomisp_internal.h
@@ -275,7 +275,7 @@
*/
struct mutex streamoff_mutex;
- int input_cnt;
+ unsigned int input_cnt;
struct atomisp_input_subdev inputs[ATOM_ISP_MAX_INPUTS];
struct v4l2_subdev *flash;
struct v4l2_subdev *motor;
diff --git a/drivers/staging/media/cxd2099/cxd2099.c b/drivers/staging/media/cxd2099/cxd2099.c
index 370ecb9..f28916e 100644
--- a/drivers/staging/media/cxd2099/cxd2099.c
+++ b/drivers/staging/media/cxd2099/cxd2099.c
@@ -1,7 +1,7 @@
/*
* cxd2099.c: Driver for the CXD2099AR Common Interface Controller
*
- * Copyright (C) 2010-2011 Digital Devices GmbH
+ * Copyright (C) 2010-2013 Digital Devices GmbH
*
*
* This program is free software; you can redistribute it and/or
@@ -33,7 +33,10 @@
#include "cxd2099.h"
-#define MAX_BUFFER_SIZE 248
+/* comment this line to deactivate the cxd2099ar buffer mode */
+#define BUFFER_MODE 1
+
+static int read_data(struct dvb_ca_en50221 *ca, int slot, u8 *ebuf, int ecount);
struct cxd {
struct dvb_ca_en50221 en;
@@ -48,6 +51,7 @@
int mode;
int ready;
int dr;
+ int write_busy;
int slot_stat;
u8 amem[1024];
@@ -55,6 +59,9 @@
int cammode;
struct mutex lock;
+
+ u8 rbuf[1028];
+ u8 wbuf[1028];
};
static int i2c_write_reg(struct i2c_adapter *adapter, u8 adr,
@@ -73,7 +80,7 @@
}
static int i2c_write(struct i2c_adapter *adapter, u8 adr,
- u8 *data, u8 len)
+ u8 *data, u16 len)
{
struct i2c_msg msg = {.addr = adr, .flags = 0, .buf = data, .len = len};
@@ -100,12 +107,12 @@
}
static int i2c_read(struct i2c_adapter *adapter, u8 adr,
- u8 reg, u8 *data, u8 n)
+ u8 reg, u8 *data, u16 n)
{
struct i2c_msg msgs[2] = {{.addr = adr, .flags = 0,
- .buf = ®, .len = 1},
- {.addr = adr, .flags = I2C_M_RD,
- .buf = data, .len = n} };
+ .buf = ®, .len = 1},
+ {.addr = adr, .flags = I2C_M_RD,
+ .buf = data, .len = n} };
if (i2c_transfer(adapter, msgs, 2) != 2) {
dev_err(&adapter->dev, "error in i2c_read\n");
@@ -114,14 +121,26 @@
return 0;
}
-static int read_block(struct cxd *ci, u8 adr, u8 *data, u8 n)
+static int read_block(struct cxd *ci, u8 adr, u8 *data, u16 n)
{
- int status;
+ int status = 0;
- status = i2c_write_reg(ci->i2c, ci->cfg.adr, 0, adr);
+ if (ci->lastaddress != adr)
+ status = i2c_write_reg(ci->i2c, ci->cfg.adr, 0, adr);
if (!status) {
ci->lastaddress = adr;
- status = i2c_read(ci->i2c, ci->cfg.adr, 1, data, n);
+
+ while (n) {
+ int len = n;
+
+ if (ci->cfg.max_i2c && (len > ci->cfg.max_i2c))
+ len = ci->cfg.max_i2c;
+ status = i2c_read(ci->i2c, ci->cfg.adr, 1, data, len);
+ if (status)
+ return status;
+ data += len;
+ n -= len;
+ }
}
return status;
}
@@ -182,16 +201,16 @@
static int write_regm(struct cxd *ci, u8 reg, u8 val, u8 mask)
{
- int status;
+ int status = 0;
- status = i2c_write_reg(ci->i2c, ci->cfg.adr, 0, reg);
+ if (ci->lastaddress != reg)
+ status = i2c_write_reg(ci->i2c, ci->cfg.adr, 0, reg);
if (!status && reg >= 6 && reg <= 8 && mask != 0xff)
status = i2c_read_reg(ci->i2c, ci->cfg.adr, 1, &ci->regs[reg]);
+ ci->lastaddress = reg;
ci->regs[reg] = (ci->regs[reg] & (~mask)) | val;
- if (!status) {
- ci->lastaddress = reg;
+ if (!status)
status = i2c_write_reg(ci->i2c, ci->cfg.adr, 1, ci->regs[reg]);
- }
if (reg == 0x20)
ci->regs[reg] &= 0x7f;
return status;
@@ -203,16 +222,29 @@
}
#ifdef BUFFER_MODE
-static int write_block(struct cxd *ci, u8 adr, u8 *data, int n)
+static int write_block(struct cxd *ci, u8 adr, u8 *data, u16 n)
{
- int status;
- u8 buf[256] = {1};
+ int status = 0;
+ u8 *buf = ci->wbuf;
- status = i2c_write_reg(ci->i2c, ci->cfg.adr, 0, adr);
- if (!status) {
- ci->lastaddress = adr;
- memcpy(buf + 1, data, n);
- status = i2c_write(ci->i2c, ci->cfg.adr, buf, n + 1);
+ if (ci->lastaddress != adr)
+ status = i2c_write_reg(ci->i2c, ci->cfg.adr, 0, adr);
+ if (status)
+ return status;
+
+ ci->lastaddress = adr;
+ buf[0] = 1;
+ while (n) {
+ int len = n;
+
+ if (ci->cfg.max_i2c && (len + 1 > ci->cfg.max_i2c))
+ len = ci->cfg.max_i2c - 1;
+ memcpy(buf + 1, data, len);
+ status = i2c_write(ci->i2c, ci->cfg.adr, buf, len + 1);
+ if (status)
+ return status;
+ n -= len;
+ data += len;
}
return status;
}
@@ -238,6 +270,8 @@
static void cam_mode(struct cxd *ci, int mode)
{
+ u8 dummy;
+
if (mode == ci->cammode)
return;
@@ -246,16 +280,15 @@
write_regm(ci, 0x20, 0x80, 0x80);
break;
case 0x01:
-#ifdef BUFFER_MODE
if (!ci->en.read_data)
return;
+ ci->write_busy = 0;
dev_info(&ci->i2c->dev, "enable cam buffer mode\n");
- /* write_reg(ci, 0x0d, 0x00); */
- /* write_reg(ci, 0x0e, 0x01); */
+ write_reg(ci, 0x0d, 0x00);
+ write_reg(ci, 0x0e, 0x01);
write_regm(ci, 0x08, 0x40, 0x40);
- /* read_reg(ci, 0x12, &dummy); */
+ read_reg(ci, 0x12, &dummy);
write_regm(ci, 0x08, 0x80, 0x80);
-#endif
break;
default:
break;
@@ -325,7 +358,10 @@
if (status < 0)
break;
- if (ci->cfg.clock_mode) {
+ if (ci->cfg.clock_mode == 2) {
+ /* bitrate*2^13/ 72000 */
+ u32 reg = ((ci->cfg.bitrate << 13) + 71999) / 72000;
+
if (ci->cfg.polarity) {
status = write_reg(ci, 0x09, 0x6f);
if (status < 0)
@@ -335,6 +371,25 @@
if (status < 0)
break;
}
+ status = write_reg(ci, 0x20, 0x08);
+ if (status < 0)
+ break;
+ status = write_reg(ci, 0x21, (reg >> 8) & 0xff);
+ if (status < 0)
+ break;
+ status = write_reg(ci, 0x22, reg & 0xff);
+ if (status < 0)
+ break;
+ } else if (ci->cfg.clock_mode == 1) {
+ if (ci->cfg.polarity) {
+ status = write_reg(ci, 0x09, 0x6f); /* D */
+ if (status < 0)
+ break;
+ } else {
+ status = write_reg(ci, 0x09, 0x6d);
+ if (status < 0)
+ break;
+ }
status = write_reg(ci, 0x20, 0x68);
if (status < 0)
break;
@@ -346,7 +401,7 @@
break;
} else {
if (ci->cfg.polarity) {
- status = write_reg(ci, 0x09, 0x4f);
+ status = write_reg(ci, 0x09, 0x4f); /* C */
if (status < 0)
break;
} else {
@@ -354,7 +409,6 @@
if (status < 0)
break;
}
-
status = write_reg(ci, 0x20, 0x28);
if (status < 0)
break;
@@ -401,7 +455,6 @@
set_mode(ci, 1);
read_pccard(ci, address, &val, 1);
mutex_unlock(&ci->lock);
- /* printk(KERN_INFO "%02x:%02x\n", address,val); */
return val;
}
@@ -446,6 +499,9 @@
{
struct cxd *ci = ca->data;
+ if (ci->cammode)
+ read_data(ca, slot, ci->rbuf, 0);
+
mutex_lock(&ci->lock);
cam_mode(ci, 0);
write_reg(ci, 0x00, 0x21);
@@ -465,7 +521,6 @@
}
}
mutex_unlock(&ci->lock);
- /* msleep(500); */
return 0;
}
@@ -474,11 +529,19 @@
struct cxd *ci = ca->data;
dev_info(&ci->i2c->dev, "%s\n", __func__);
+ if (ci->cammode)
+ read_data(ca, slot, ci->rbuf, 0);
mutex_lock(&ci->lock);
+ write_reg(ci, 0x00, 0x21);
+ write_reg(ci, 0x06, 0x1F);
+ msleep(300);
+
write_regm(ci, 0x09, 0x08, 0x08);
write_regm(ci, 0x20, 0x80, 0x80); /* Reset CAM Mode */
write_regm(ci, 0x06, 0x07, 0x07); /* Clear IO Mode */
+
ci->mode = -1;
+ ci->write_busy = 0;
mutex_unlock(&ci->lock);
return 0;
}
@@ -490,9 +553,7 @@
mutex_lock(&ci->lock);
write_regm(ci, 0x09, 0x00, 0x08);
set_mode(ci, 0);
-#ifdef BUFFER_MODE
cam_mode(ci, 1);
-#endif
mutex_unlock(&ci->lock);
return 0;
}
@@ -506,12 +567,10 @@
return 0;
write_reg(ci, 0x05, istat);
- if (istat & 0x40) {
+ if (istat & 0x40)
ci->dr = 1;
- dev_info(&ci->i2c->dev, "DR\n");
- }
if (istat & 0x20)
- dev_info(&ci->i2c->dev, "WC\n");
+ ci->write_busy = 0;
if (istat & 2) {
u8 slotstat;
@@ -519,7 +578,8 @@
read_reg(ci, 0x01, &slotstat);
if (!(2 & slotstat)) {
if (!ci->slot_stat) {
- ci->slot_stat = DVB_CA_EN50221_POLL_CAM_PRESENT;
+ ci->slot_stat |=
+ DVB_CA_EN50221_POLL_CAM_PRESENT;
write_regm(ci, 0x03, 0x08, 0x08);
}
@@ -531,8 +591,8 @@
ci->ready = 0;
}
}
- if (istat & 8 &&
- ci->slot_stat == DVB_CA_EN50221_POLL_CAM_PRESENT) {
+ if ((istat & 8) &&
+ (ci->slot_stat == DVB_CA_EN50221_POLL_CAM_PRESENT)) {
ci->ready = 1;
ci->slot_stat |= DVB_CA_EN50221_POLL_CAM_READY;
}
@@ -553,7 +613,6 @@
return ci->slot_stat;
}
-#ifdef BUFFER_MODE
static int read_data(struct dvb_ca_en50221 *ca, int slot, u8 *ebuf, int ecount)
{
struct cxd *ci = ca->data;
@@ -564,30 +623,38 @@
campoll(ci);
mutex_unlock(&ci->lock);
- dev_info(&ci->i2c->dev, "%s\n", __func__);
if (!ci->dr)
return 0;
mutex_lock(&ci->lock);
read_reg(ci, 0x0f, &msb);
read_reg(ci, 0x10, &lsb);
- len = (msb << 8) | lsb;
+ len = ((u16)msb << 8) | lsb;
+ if (len > ecount || len < 2) {
+ /* read it anyway or cxd may hang */
+ read_block(ci, 0x12, ci->rbuf, len);
+ mutex_unlock(&ci->lock);
+ return -EIO;
+ }
read_block(ci, 0x12, ebuf, len);
ci->dr = 0;
mutex_unlock(&ci->lock);
-
return len;
}
+#ifdef BUFFER_MODE
+
static int write_data(struct dvb_ca_en50221 *ca, int slot, u8 *ebuf, int ecount)
{
struct cxd *ci = ca->data;
+ if (ci->write_busy)
+ return -EAGAIN;
mutex_lock(&ci->lock);
- dev_info(&ci->i2c->dev, "%s %d\n", __func__, ecount);
write_reg(ci, 0x0d, ecount >> 8);
write_reg(ci, 0x0e, ecount & 0xff);
write_block(ci, 0x11, ebuf, ecount);
+ ci->write_busy = 1;
mutex_unlock(&ci->lock);
return ecount;
}
diff --git a/drivers/staging/media/cxd2099/cxd2099.h b/drivers/staging/media/cxd2099/cxd2099.h
index 0eb607c..f4b29b1 100644
--- a/drivers/staging/media/cxd2099/cxd2099.h
+++ b/drivers/staging/media/cxd2099/cxd2099.h
@@ -30,8 +30,10 @@
struct cxd2099_cfg {
u32 bitrate;
u8 adr;
- u8 polarity:1;
- u8 clock_mode:1;
+ u8 polarity;
+ u8 clock_mode;
+
+ u32 max_i2c;
};
#if defined(CONFIG_DVB_CXD2099) || \
diff --git a/drivers/staging/mt29f_spinand/mt29f_spinand.c b/drivers/staging/mt29f_spinand/mt29f_spinand.c
index e389009..a4e3ae8 100644
--- a/drivers/staging/mt29f_spinand/mt29f_spinand.c
+++ b/drivers/staging/mt29f_spinand/mt29f_spinand.c
@@ -915,6 +915,8 @@
chip->waitfunc = spinand_wait;
chip->options |= NAND_CACHEPRG;
chip->select_chip = spinand_select_chip;
+ chip->onfi_set_features = nand_onfi_get_set_features_notsupp;
+ chip->onfi_get_features = nand_onfi_get_set_features_notsupp;
mtd = nand_to_mtd(chip);
diff --git a/drivers/staging/rtl8188eu/core/rtw_cmd.c b/drivers/staging/rtl8188eu/core/rtw_cmd.c
index 002d091..a69007e 100644
--- a/drivers/staging/rtl8188eu/core/rtw_cmd.c
+++ b/drivers/staging/rtl8188eu/core/rtw_cmd.c
@@ -132,7 +132,7 @@
kfree(pcmd->parmbuf);
}
- if (!pcmd->rsp) {
+ if (pcmd->rsp) {
if (pcmd->rspsz != 0) {
/* free rsp in cmd_obj */
kfree(pcmd->rsp);
diff --git a/drivers/staging/rtl8188eu/os_dep/usb_intf.c b/drivers/staging/rtl8188eu/os_dep/usb_intf.c
index 963235f..d283341 100644
--- a/drivers/staging/rtl8188eu/os_dep/usb_intf.c
+++ b/drivers/staging/rtl8188eu/os_dep/usb_intf.c
@@ -43,6 +43,7 @@
{USB_DEVICE(0x2001, 0x330F)}, /* DLink DWA-125 REV D1 */
{USB_DEVICE(0x2001, 0x3310)}, /* Dlink DWA-123 REV D1 */
{USB_DEVICE(0x2001, 0x3311)}, /* DLink GO-USB-N150 REV B1 */
+ {USB_DEVICE(0x2357, 0x010c)}, /* TP-Link TL-WN722N v2 */
{USB_DEVICE(0x0df6, 0x0076)}, /* Sitecom N150 v2 */
{} /* Terminating entry */
};
diff --git a/drivers/staging/rts5208/rtsx.c b/drivers/staging/rts5208/rtsx.c
index b8177f5..e719b1e 100644
--- a/drivers/staging/rts5208/rtsx.c
+++ b/drivers/staging/rts5208/rtsx.c
@@ -205,16 +205,6 @@
return SUCCESS;
}
-/* Simulate a SCSI bus reset by resetting the device's USB port. */
-static int bus_reset(struct scsi_cmnd *srb)
-{
- struct rtsx_dev *dev = host_to_rtsx(srb->device->host);
-
- dev_info(&dev->pci->dev, "%s called\n", __func__);
-
- return SUCCESS;
-}
-
/*
* this defines our host template, with which we'll allocate hosts
*/
@@ -231,7 +221,6 @@
/* error and abort handlers */
.eh_abort_handler = command_abort,
.eh_device_reset_handler = device_reset,
- .eh_bus_reset_handler = bus_reset,
/* queue commands only, only one command per LUN */
.can_queue = 1,
diff --git a/drivers/staging/sm750fb/ddk750_chip.c b/drivers/staging/sm750fb/ddk750_chip.c
index 944dd25..4754f7a 100644
--- a/drivers/staging/sm750fb/ddk750_chip.c
+++ b/drivers/staging/sm750fb/ddk750_chip.c
@@ -40,7 +40,7 @@
pll_reg = peek32(MXCLK_PLL_CTRL);
M = (pll_reg & PLL_CTRL_M_MASK) >> PLL_CTRL_M_SHIFT;
- N = (pll_reg & PLL_CTRL_N_MASK) >> PLL_CTRL_M_SHIFT;
+ N = (pll_reg & PLL_CTRL_N_MASK) >> PLL_CTRL_N_SHIFT;
OD = (pll_reg & PLL_CTRL_OD_MASK) >> PLL_CTRL_OD_SHIFT;
POD = (pll_reg & PLL_CTRL_POD_MASK) >> PLL_CTRL_POD_SHIFT;
diff --git a/drivers/staging/sm750fb/sm750.c b/drivers/staging/sm750fb/sm750.c
index 3aa4128..67207b0 100644
--- a/drivers/staging/sm750fb/sm750.c
+++ b/drivers/staging/sm750fb/sm750.c
@@ -1053,6 +1053,26 @@
return err;
}
+static int lynxfb_kick_out_firmware_fb(struct pci_dev *pdev)
+{
+ struct apertures_struct *ap;
+ bool primary = false;
+
+ ap = alloc_apertures(1);
+ if (!ap)
+ return -ENOMEM;
+
+ ap->ranges[0].base = pci_resource_start(pdev, 0);
+ ap->ranges[0].size = pci_resource_len(pdev, 0);
+#ifdef CONFIG_X86
+ primary = pdev->resource[PCI_ROM_RESOURCE].flags &
+ IORESOURCE_ROM_SHADOW;
+#endif
+ remove_conflicting_framebuffers(ap, "sm750_fb1", primary);
+ kfree(ap);
+ return 0;
+}
+
static int lynxfb_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
@@ -1061,6 +1081,10 @@
int fbidx;
int err;
+ err = lynxfb_kick_out_firmware_fb(pdev);
+ if (err)
+ return err;
+
/* enable device */
err = pcim_enable_device(pdev);
if (err)
diff --git a/drivers/staging/speakup/main.c b/drivers/staging/speakup/main.c
index 82e5de2..67956e2 100644
--- a/drivers/staging/speakup/main.c
+++ b/drivers/staging/speakup/main.c
@@ -2314,6 +2314,7 @@
mutex_lock(&spk_mutex);
synth_release();
mutex_unlock(&spk_mutex);
+ spk_ttyio_unregister_ldisc();
speakup_kobj_exit();
@@ -2376,6 +2377,7 @@
if (err)
goto error_kobjects;
+ spk_ttyio_register_ldisc();
synth_init(synth_name);
speakup_register_devsynth();
/*
diff --git a/drivers/staging/speakup/spk_priv.h b/drivers/staging/speakup/spk_priv.h
index 87b6a0a..046040a 100644
--- a/drivers/staging/speakup/spk_priv.h
+++ b/drivers/staging/speakup/spk_priv.h
@@ -48,6 +48,8 @@
int spk_wait_for_xmitr(struct spk_synth *in_synth);
void spk_serial_release(void);
void spk_ttyio_release(void);
+void spk_ttyio_register_ldisc(void);
+void spk_ttyio_unregister_ldisc(void);
void synth_buffer_skip_nonlatin1(void);
u16 synth_buffer_getc(void);
diff --git a/drivers/staging/speakup/spk_ttyio.c b/drivers/staging/speakup/spk_ttyio.c
index ed8e96b..fe340b0 100644
--- a/drivers/staging/speakup/spk_ttyio.c
+++ b/drivers/staging/speakup/spk_ttyio.c
@@ -154,12 +154,6 @@
struct ktermios tmp_termios;
dev_t dev;
- ret = tty_register_ldisc(N_SPEAKUP, &spk_ttyio_ldisc_ops);
- if (ret) {
- pr_err("Error registering line discipline.\n");
- return ret;
- }
-
ret = get_dev_to_use(synth, &dev);
if (ret)
return ret;
@@ -196,10 +190,24 @@
tty_unlock(tty);
ret = tty_set_ldisc(tty, N_SPEAKUP);
+ if (ret)
+ pr_err("speakup: Failed to set N_SPEAKUP on tty\n");
return ret;
}
+void spk_ttyio_register_ldisc(void)
+{
+ if (tty_register_ldisc(N_SPEAKUP, &spk_ttyio_ldisc_ops))
+ pr_warn("speakup: Error registering line discipline. Most synths won't work.\n");
+}
+
+void spk_ttyio_unregister_ldisc(void)
+{
+ if (tty_unregister_ldisc(N_SPEAKUP))
+ pr_warn("speakup: Couldn't unregister ldisc\n");
+}
+
static int spk_ttyio_out(struct spk_synth *in_synth, const char ch)
{
if (in_synth->alive && speakup_tty && speakup_tty->ops->write) {
@@ -300,7 +308,7 @@
tty_ldisc_flush(speakup_tty);
tty_unlock(speakup_tty);
- tty_ldisc_release(speakup_tty);
+ tty_release_struct(speakup_tty, speakup_tty->index);
}
EXPORT_SYMBOL_GPL(spk_ttyio_release);
diff --git a/drivers/staging/unisys/visorhba/visorhba_main.c b/drivers/staging/unisys/visorhba/visorhba_main.c
index a6e7a6b..ddce925 100644
--- a/drivers/staging/unisys/visorhba/visorhba_main.c
+++ b/drivers/staging/unisys/visorhba/visorhba_main.c
@@ -47,8 +47,8 @@
MODULE_ALIAS("visorbus:" VISOR_VHBA_CHANNEL_UUID_STR);
struct visordisk_info {
+ struct scsi_device *sdev;
u32 valid;
- u32 channel, id, lun; /* Disk Path */
atomic_t ios_threshold;
atomic_t error_count;
struct visordisk_info *next;
@@ -101,12 +101,6 @@
struct visorhba_devdata *devdata;
};
-#define for_each_vdisk_match(iter, list, match) \
- for (iter = &list->head; iter->next; iter = iter->next) \
- if ((iter->channel == match->channel) && \
- (iter->id == match->id) && \
- (iter->lun == match->lun))
-
/*
* visor_thread_start - starts a thread for the device
* @threadfn: Function the thread starts
@@ -296,10 +290,9 @@
* Returns whether the command was queued successfully or not.
*/
static int forward_taskmgmt_command(enum task_mgmt_types tasktype,
- struct scsi_cmnd *scsicmd)
+ struct scsi_device *scsidev)
{
struct uiscmdrsp *cmdrsp;
- struct scsi_device *scsidev = scsicmd->device;
struct visorhba_devdata *devdata =
(struct visorhba_devdata *)scsidev->host->hostdata;
int notifyresult = 0xffff;
@@ -347,12 +340,6 @@
dev_dbg(&scsidev->sdev_gendev,
"visorhba: taskmgmt type=%d success; result=0x%x\n",
tasktype, notifyresult);
- if (tasktype == TASK_MGMT_ABORT_TASK)
- scsicmd->result = DID_ABORT << 16;
- else
- scsicmd->result = DID_RESET << 16;
-
- scsicmd->scsi_done(scsicmd);
cleanup_scsitaskmgmt_handles(&devdata->idr, cmdrsp);
return SUCCESS;
@@ -376,17 +363,20 @@
/* issue TASK_MGMT_ABORT_TASK */
struct scsi_device *scsidev;
struct visordisk_info *vdisk;
- struct visorhba_devdata *devdata;
+ int rtn;
scsidev = scsicmd->device;
- devdata = (struct visorhba_devdata *)scsidev->host->hostdata;
- for_each_vdisk_match(vdisk, devdata, scsidev) {
- if (atomic_read(&vdisk->error_count) < VISORHBA_ERROR_COUNT)
- atomic_inc(&vdisk->error_count);
- else
- atomic_set(&vdisk->ios_threshold, IOS_ERROR_THRESHOLD);
+ vdisk = scsidev->hostdata;
+ if (atomic_read(&vdisk->error_count) < VISORHBA_ERROR_COUNT)
+ atomic_inc(&vdisk->error_count);
+ else
+ atomic_set(&vdisk->ios_threshold, IOS_ERROR_THRESHOLD);
+ rtn = forward_taskmgmt_command(TASK_MGMT_ABORT_TASK, scsidev);
+ if (rtn == SUCCESS) {
+ scsicmd->result = DID_ABORT << 16;
+ scsicmd->scsi_done(scsicmd);
}
- return forward_taskmgmt_command(TASK_MGMT_ABORT_TASK, scsicmd);
+ return rtn;
}
/*
@@ -400,17 +390,20 @@
/* issue TASK_MGMT_LUN_RESET */
struct scsi_device *scsidev;
struct visordisk_info *vdisk;
- struct visorhba_devdata *devdata;
+ int rtn;
scsidev = scsicmd->device;
- devdata = (struct visorhba_devdata *)scsidev->host->hostdata;
- for_each_vdisk_match(vdisk, devdata, scsidev) {
- if (atomic_read(&vdisk->error_count) < VISORHBA_ERROR_COUNT)
- atomic_inc(&vdisk->error_count);
- else
- atomic_set(&vdisk->ios_threshold, IOS_ERROR_THRESHOLD);
+ vdisk = scsidev->hostdata;
+ if (atomic_read(&vdisk->error_count) < VISORHBA_ERROR_COUNT)
+ atomic_inc(&vdisk->error_count);
+ else
+ atomic_set(&vdisk->ios_threshold, IOS_ERROR_THRESHOLD);
+ rtn = forward_taskmgmt_command(TASK_MGMT_LUN_RESET, scsidev);
+ if (rtn == SUCCESS) {
+ scsicmd->result = DID_RESET << 16;
+ scsicmd->scsi_done(scsicmd);
}
- return forward_taskmgmt_command(TASK_MGMT_LUN_RESET, scsicmd);
+ return rtn;
}
/*
@@ -424,17 +417,22 @@
{
struct scsi_device *scsidev;
struct visordisk_info *vdisk;
- struct visorhba_devdata *devdata;
+ int rtn;
scsidev = scsicmd->device;
- devdata = (struct visorhba_devdata *)scsidev->host->hostdata;
- for_each_vdisk_match(vdisk, devdata, scsidev) {
+ shost_for_each_device(scsidev, scsidev->host) {
+ vdisk = scsidev->hostdata;
if (atomic_read(&vdisk->error_count) < VISORHBA_ERROR_COUNT)
atomic_inc(&vdisk->error_count);
else
atomic_set(&vdisk->ios_threshold, IOS_ERROR_THRESHOLD);
}
- return forward_taskmgmt_command(TASK_MGMT_BUS_RESET, scsicmd);
+ rtn = forward_taskmgmt_command(TASK_MGMT_BUS_RESET, scsidev);
+ if (rtn == SUCCESS) {
+ scsicmd->result = DID_RESET << 16;
+ scsicmd->scsi_done(scsicmd);
+ }
+ return rtn;
}
/*
@@ -569,25 +567,22 @@
* LLD can alloc any struct & do init if needed.
*/
struct visordisk_info *vdisk;
- struct visordisk_info *tmpvdisk;
struct visorhba_devdata *devdata;
struct Scsi_Host *scsihost = (struct Scsi_Host *)scsidev->host;
+ if (scsidev->hostdata)
+ return 0; /* already allocated return success */
+
devdata = (struct visorhba_devdata *)scsihost->hostdata;
if (!devdata)
return 0; /* even though we errored, treat as success */
- for_each_vdisk_match(vdisk, devdata, scsidev)
- return 0; /* already allocated return success */
-
- tmpvdisk = kzalloc(sizeof(*tmpvdisk), GFP_ATOMIC);
- if (!tmpvdisk)
+ vdisk = kzalloc(sizeof(*vdisk), GFP_ATOMIC);
+ if (!vdisk)
return -ENOMEM;
- tmpvdisk->channel = scsidev->channel;
- tmpvdisk->id = scsidev->id;
- tmpvdisk->lun = scsidev->lun;
- vdisk->next = tmpvdisk;
+ vdisk->sdev = scsidev;
+ scsidev->hostdata = vdisk;
return 0;
}
@@ -603,17 +598,11 @@
/* midlevel calls this after device has been quiesced and
* before it is to be deleted.
*/
- struct visordisk_info *vdisk, *delvdisk;
- struct visorhba_devdata *devdata;
- struct Scsi_Host *scsihost = (struct Scsi_Host *)scsidev->host;
+ struct visordisk_info *vdisk;
- devdata = (struct visorhba_devdata *)scsihost->hostdata;
- for_each_vdisk_match(vdisk, devdata, scsidev) {
- delvdisk = vdisk->next;
- vdisk->next = delvdisk->next;
- kfree(delvdisk);
- return;
- }
+ vdisk = scsidev->hostdata;
+ scsidev->hostdata = NULL;
+ kfree(vdisk);
}
static struct scsi_host_template visorhba_driver_template = {
@@ -787,7 +776,6 @@
static void
do_scsi_linuxstat(struct uiscmdrsp *cmdrsp, struct scsi_cmnd *scsicmd)
{
- struct visorhba_devdata *devdata;
struct visordisk_info *vdisk;
struct scsi_device *scsidev;
@@ -800,12 +788,10 @@
(cmdrsp->scsi.addlstat == ADDL_SEL_TIMEOUT))
return;
/* Okay see what our error_count is here.... */
- devdata = (struct visorhba_devdata *)scsidev->host->hostdata;
- for_each_vdisk_match(vdisk, devdata, scsidev) {
- if (atomic_read(&vdisk->error_count) < VISORHBA_ERROR_COUNT) {
- atomic_inc(&vdisk->error_count);
- atomic_set(&vdisk->ios_threshold, IOS_ERROR_THRESHOLD);
- }
+ vdisk = scsidev->hostdata;
+ if (atomic_read(&vdisk->error_count) < VISORHBA_ERROR_COUNT) {
+ atomic_inc(&vdisk->error_count);
+ atomic_set(&vdisk->ios_threshold, IOS_ERROR_THRESHOLD);
}
}
@@ -846,7 +832,6 @@
char *this_page_orig;
int bufind = 0;
struct visordisk_info *vdisk;
- struct visorhba_devdata *devdata;
scsidev = scsicmd->device;
if ((cmdrsp->scsi.cmnd[0] == INQUIRY) &&
@@ -883,13 +868,11 @@
}
kfree(buf);
} else {
- devdata = (struct visorhba_devdata *)scsidev->host->hostdata;
- for_each_vdisk_match(vdisk, devdata, scsidev) {
- if (atomic_read(&vdisk->ios_threshold) > 0) {
- atomic_dec(&vdisk->ios_threshold);
- if (atomic_read(&vdisk->ios_threshold) == 0)
- atomic_set(&vdisk->error_count, 0);
- }
+ vdisk = scsidev->hostdata;
+ if (atomic_read(&vdisk->ios_threshold) > 0) {
+ atomic_dec(&vdisk->ios_threshold);
+ if (atomic_read(&vdisk->ios_threshold) == 0)
+ atomic_set(&vdisk->error_count, 0);
}
}
}
diff --git a/drivers/staging/vboxvideo/Kconfig b/drivers/staging/vboxvideo/Kconfig
new file mode 100644
index 0000000..a52746f
--- /dev/null
+++ b/drivers/staging/vboxvideo/Kconfig
@@ -0,0 +1,12 @@
+config DRM_VBOXVIDEO
+ tristate "Virtual Box Graphics Card"
+ depends on DRM && X86 && PCI
+ select DRM_KMS_HELPER
+ help
+ This is a KMS driver for the virtual Graphics Card used in
+ Virtual Box virtual machines.
+
+ Although it is possible to builtin this module, it is advised
+ to build this driver as a module, so that it can be updated
+ independently of the kernel. Select M to built this driver as a
+ module and add support for these devices via drm/kms interfaces.
diff --git a/drivers/staging/vboxvideo/Makefile b/drivers/staging/vboxvideo/Makefile
new file mode 100644
index 0000000..2d0b3bc
--- /dev/null
+++ b/drivers/staging/vboxvideo/Makefile
@@ -0,0 +1,7 @@
+ccflags-y := -Iinclude/drm
+
+vboxvideo-y := hgsmi_base.o modesetting.o vbva_base.o \
+ vbox_drv.o vbox_fb.o vbox_hgsmi.o vbox_irq.o vbox_main.o \
+ vbox_mode.o vbox_prime.o vbox_ttm.o
+
+obj-$(CONFIG_DRM_VBOXVIDEO) += vboxvideo.o
diff --git a/drivers/staging/vboxvideo/TODO b/drivers/staging/vboxvideo/TODO
new file mode 100644
index 0000000..ce76430
--- /dev/null
+++ b/drivers/staging/vboxvideo/TODO
@@ -0,0 +1,9 @@
+TODO:
+-Move the driver over to the atomic API
+-Stop using old load / unload drm_driver hooks
+-Get a full review from the drm-maintainers on dri-devel done on this driver
+-Extend this TODO with the results of that review
+
+Please send any patches to Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
+Hans de Goede <hdegoede@redhat.com> and
+Michael Thayer <michael.thayer@oracle.com>.
diff --git a/drivers/staging/vboxvideo/hgsmi_base.c b/drivers/staging/vboxvideo/hgsmi_base.c
new file mode 100644
index 0000000..15ff5f4
--- /dev/null
+++ b/drivers/staging/vboxvideo/hgsmi_base.c
@@ -0,0 +1,246 @@
+/*
+ * Copyright (C) 2006-2017 Oracle Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "vbox_drv.h"
+#include "vbox_err.h"
+#include "vboxvideo_guest.h"
+#include "vboxvideo_vbe.h"
+#include "hgsmi_channels.h"
+#include "hgsmi_ch_setup.h"
+
+/**
+ * Inform the host of the location of the host flags in VRAM via an HGSMI cmd.
+ * @param ctx the context of the guest heap to use.
+ * @param location the offset chosen for the flags within guest VRAM.
+ * @returns 0 on success, -errno on failure
+ */
+int hgsmi_report_flags_location(struct gen_pool *ctx, u32 location)
+{
+ struct hgsmi_buffer_location *p;
+
+ p = hgsmi_buffer_alloc(ctx, sizeof(*p), HGSMI_CH_HGSMI,
+ HGSMI_CC_HOST_FLAGS_LOCATION);
+ if (!p)
+ return -ENOMEM;
+
+ p->buf_location = location;
+ p->buf_len = sizeof(struct hgsmi_host_flags);
+
+ hgsmi_buffer_submit(ctx, p);
+ hgsmi_buffer_free(ctx, p);
+
+ return 0;
+}
+
+/**
+ * Notify the host of HGSMI-related guest capabilities via an HGSMI command.
+ * @param ctx the context of the guest heap to use.
+ * @param caps the capabilities to report, see vbva_caps.
+ * @returns 0 on success, -errno on failure
+ */
+int hgsmi_send_caps_info(struct gen_pool *ctx, u32 caps)
+{
+ struct vbva_caps *p;
+
+ p = hgsmi_buffer_alloc(ctx, sizeof(*p), HGSMI_CH_VBVA, VBVA_INFO_CAPS);
+ if (!p)
+ return -ENOMEM;
+
+ p->rc = VERR_NOT_IMPLEMENTED;
+ p->caps = caps;
+
+ hgsmi_buffer_submit(ctx, p);
+
+ WARN_ON_ONCE(RT_FAILURE(p->rc));
+
+ hgsmi_buffer_free(ctx, p);
+
+ return 0;
+}
+
+int hgsmi_test_query_conf(struct gen_pool *ctx)
+{
+ u32 value = 0;
+ int ret;
+
+ ret = hgsmi_query_conf(ctx, U32_MAX, &value);
+ if (ret)
+ return ret;
+
+ return value == U32_MAX ? 0 : -EIO;
+}
+
+/**
+ * Query the host for an HGSMI configuration parameter via an HGSMI command.
+ * @param ctx the context containing the heap used
+ * @param index the index of the parameter to query,
+ * @see vbva_conf32::index
+ * @param value_ret where to store the value of the parameter on success
+ * @returns 0 on success, -errno on failure
+ */
+int hgsmi_query_conf(struct gen_pool *ctx, u32 index, u32 *value_ret)
+{
+ struct vbva_conf32 *p;
+
+ p = hgsmi_buffer_alloc(ctx, sizeof(*p), HGSMI_CH_VBVA,
+ VBVA_QUERY_CONF32);
+ if (!p)
+ return -ENOMEM;
+
+ p->index = index;
+ p->value = U32_MAX;
+
+ hgsmi_buffer_submit(ctx, p);
+
+ *value_ret = p->value;
+
+ hgsmi_buffer_free(ctx, p);
+
+ return 0;
+}
+
+/**
+ * Pass the host a new mouse pointer shape via an HGSMI command.
+ *
+ * @param ctx the context containing the heap to be used
+ * @param flags cursor flags, @see VMMDevReqMousePointer::flags
+ * @param hot_x horizontal position of the hot spot
+ * @param hot_y vertical position of the hot spot
+ * @param width width in pixels of the cursor
+ * @param height height in pixels of the cursor
+ * @param pixels pixel data, @see VMMDevReqMousePointer for the format
+ * @param len size in bytes of the pixel data
+ * @returns 0 on success, -errno on failure
+ */
+int hgsmi_update_pointer_shape(struct gen_pool *ctx, u32 flags,
+ u32 hot_x, u32 hot_y, u32 width, u32 height,
+ u8 *pixels, u32 len)
+{
+ struct vbva_mouse_pointer_shape *p;
+ u32 pixel_len = 0;
+ int rc;
+
+ if (flags & VBOX_MOUSE_POINTER_SHAPE) {
+ /*
+ * Size of the pointer data:
+ * sizeof (AND mask) + sizeof (XOR_MASK)
+ */
+ pixel_len = ((((width + 7) / 8) * height + 3) & ~3) +
+ width * 4 * height;
+ if (pixel_len > len)
+ return -EINVAL;
+
+ /*
+ * If shape is supplied, then always create the pointer visible.
+ * See comments in 'vboxUpdatePointerShape'
+ */
+ flags |= VBOX_MOUSE_POINTER_VISIBLE;
+ }
+
+ p = hgsmi_buffer_alloc(ctx, sizeof(*p) + pixel_len, HGSMI_CH_VBVA,
+ VBVA_MOUSE_POINTER_SHAPE);
+ if (!p)
+ return -ENOMEM;
+
+ p->result = VINF_SUCCESS;
+ p->flags = flags;
+ p->hot_X = hot_x;
+ p->hot_y = hot_y;
+ p->width = width;
+ p->height = height;
+ if (pixel_len)
+ memcpy(p->data, pixels, pixel_len);
+
+ hgsmi_buffer_submit(ctx, p);
+
+ switch (p->result) {
+ case VINF_SUCCESS:
+ rc = 0;
+ break;
+ case VERR_NO_MEMORY:
+ rc = -ENOMEM;
+ break;
+ case VERR_NOT_SUPPORTED:
+ rc = -EBUSY;
+ break;
+ default:
+ rc = -EINVAL;
+ }
+
+ hgsmi_buffer_free(ctx, p);
+
+ return rc;
+}
+
+/**
+ * Report the guest cursor position. The host may wish to use this information
+ * to re-position its own cursor (though this is currently unlikely). The
+ * current host cursor position is returned.
+ * @param ctx The context containing the heap used.
+ * @param report_position Are we reporting a position?
+ * @param x Guest cursor X position.
+ * @param y Guest cursor Y position.
+ * @param x_host Host cursor X position is stored here. Optional.
+ * @param y_host Host cursor Y position is stored here. Optional.
+ * @returns 0 on success, -errno on failure
+ */
+int hgsmi_cursor_position(struct gen_pool *ctx, bool report_position,
+ u32 x, u32 y, u32 *x_host, u32 *y_host)
+{
+ struct vbva_cursor_position *p;
+
+ p = hgsmi_buffer_alloc(ctx, sizeof(*p), HGSMI_CH_VBVA,
+ VBVA_CURSOR_POSITION);
+ if (!p)
+ return -ENOMEM;
+
+ p->report_position = report_position;
+ p->x = x;
+ p->y = y;
+
+ hgsmi_buffer_submit(ctx, p);
+
+ *x_host = p->x;
+ *y_host = p->y;
+
+ hgsmi_buffer_free(ctx, p);
+
+ return 0;
+}
+
+/**
+ * @todo Mouse pointer position to be read from VMMDev memory, address of the
+ * memory region can be queried from VMMDev via an IOCTL. This VMMDev memory
+ * region will contain host information which is needed by the guest.
+ *
+ * Reading will not cause a switch to the host.
+ *
+ * Have to take into account:
+ * * synchronization: host must write to the memory only from EMT,
+ * large structures must be read under flag, which tells the host
+ * that the guest is currently reading the memory (OWNER flag?).
+ * * guest writes: may be allocate a page for the host info and make
+ * the page readonly for the guest.
+ * * the information should be available only for additions drivers.
+ * * VMMDev additions driver will inform the host which version of the info
+ * it expects, host must support all versions.
+ */
diff --git a/drivers/staging/vboxvideo/hgsmi_ch_setup.h b/drivers/staging/vboxvideo/hgsmi_ch_setup.h
new file mode 100644
index 0000000..8e6d9e1
--- /dev/null
+++ b/drivers/staging/vboxvideo/hgsmi_ch_setup.h
@@ -0,0 +1,66 @@
+/*
+ * Copyright (C) 2006-2017 Oracle Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef __HGSMI_CH_SETUP_H__
+#define __HGSMI_CH_SETUP_H__
+
+/*
+ * Tell the host the location of hgsmi_host_flags structure, where the host
+ * can write information about pending buffers, etc, and which can be quickly
+ * polled by the guest without a need to port IO.
+ */
+#define HGSMI_CC_HOST_FLAGS_LOCATION 0
+
+struct hgsmi_buffer_location {
+ u32 buf_location;
+ u32 buf_len;
+} __packed;
+
+/* HGSMI setup and configuration data structures. */
+/* host->guest commands pending, should be accessed under FIFO lock only */
+#define HGSMIHOSTFLAGS_COMMANDS_PENDING 0x01u
+/* IRQ is fired, should be accessed under VGAState::lock only */
+#define HGSMIHOSTFLAGS_IRQ 0x02u
+/* vsync interrupt flag, should be accessed under VGAState::lock only */
+#define HGSMIHOSTFLAGS_VSYNC 0x10u
+/** monitor hotplug flag, should be accessed under VGAState::lock only */
+#define HGSMIHOSTFLAGS_HOTPLUG 0x20u
+/**
+ * Cursor capability state change flag, should be accessed under
+ * VGAState::lock only. @see vbva_conf32.
+ */
+#define HGSMIHOSTFLAGS_CURSOR_CAPABILITIES 0x40u
+
+struct hgsmi_host_flags {
+ /*
+ * Host flags can be accessed and modified in multiple threads
+ * concurrently, e.g. CrOpenGL HGCM and GUI threads when completing
+ * HGSMI 3D and Video Accel respectively, EMT thread when dealing with
+ * HGSMI command processing, etc.
+ * Besides settings/cleaning flags atomically, some flags have their
+ * own special sync restrictions, see comments for flags above.
+ */
+ u32 host_flags;
+ u32 reserved[3];
+} __packed;
+
+#endif
diff --git a/drivers/staging/vboxvideo/hgsmi_channels.h b/drivers/staging/vboxvideo/hgsmi_channels.h
new file mode 100644
index 0000000..a2a34b2
--- /dev/null
+++ b/drivers/staging/vboxvideo/hgsmi_channels.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2006-2017 Oracle Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef __HGSMI_CHANNELS_H__
+#define __HGSMI_CHANNELS_H__
+
+/*
+ * Each channel has an 8 bit identifier. There are a number of predefined
+ * (hardcoded) channels.
+ *
+ * HGSMI_CH_HGSMI channel can be used to map a string channel identifier
+ * to a free 16 bit numerical value. values are allocated in range
+ * [HGSMI_CH_STRING_FIRST;HGSMI_CH_STRING_LAST].
+ */
+
+/* A reserved channel value */
+#define HGSMI_CH_RESERVED 0x00
+/* HGCMI: setup and configuration */
+#define HGSMI_CH_HGSMI 0x01
+/* Graphics: VBVA */
+#define HGSMI_CH_VBVA 0x02
+/* Graphics: Seamless with a single guest region */
+#define HGSMI_CH_SEAMLESS 0x03
+/* Graphics: Seamless with separate host windows */
+#define HGSMI_CH_SEAMLESS2 0x04
+/* Graphics: OpenGL HW acceleration */
+#define HGSMI_CH_OPENGL 0x05
+
+/* The first channel index to be used for string mappings (inclusive) */
+#define HGSMI_CH_STRING_FIRST 0x20
+/* The last channel index for string mappings (inclusive) */
+#define HGSMI_CH_STRING_LAST 0xff
+
+#endif
diff --git a/drivers/staging/vboxvideo/hgsmi_defs.h b/drivers/staging/vboxvideo/hgsmi_defs.h
new file mode 100644
index 0000000..5b21fb9
--- /dev/null
+++ b/drivers/staging/vboxvideo/hgsmi_defs.h
@@ -0,0 +1,92 @@
+/*
+ * Copyright (C) 2006-2017 Oracle Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef __HGSMI_DEFS_H__
+#define __HGSMI_DEFS_H__
+
+/* Buffer sequence type mask. */
+#define HGSMI_BUFFER_HEADER_F_SEQ_MASK 0x03
+/* Single buffer, not a part of a sequence. */
+#define HGSMI_BUFFER_HEADER_F_SEQ_SINGLE 0x00
+/* The first buffer in a sequence. */
+#define HGSMI_BUFFER_HEADER_F_SEQ_START 0x01
+/* A middle buffer in a sequence. */
+#define HGSMI_BUFFER_HEADER_F_SEQ_CONTINUE 0x02
+/* The last buffer in a sequence. */
+#define HGSMI_BUFFER_HEADER_F_SEQ_END 0x03
+
+/* 16 bytes buffer header. */
+struct hgsmi_buffer_header {
+ u32 data_size; /* Size of data that follows the header. */
+ u8 flags; /* HGSMI_BUFFER_HEADER_F_* */
+ u8 channel; /* The channel the data must be routed to. */
+ u16 channel_info; /* Opaque to the HGSMI, used by the channel. */
+
+ union {
+ /* Opaque placeholder to make the union 8 bytes. */
+ u8 header_data[8];
+
+ /* HGSMI_BUFFER_HEADER_F_SEQ_SINGLE */
+ struct {
+ u32 reserved1; /* A reserved field, initialize to 0. */
+ u32 reserved2; /* A reserved field, initialize to 0. */
+ } buffer;
+
+ /* HGSMI_BUFFER_HEADER_F_SEQ_START */
+ struct {
+ /* Must be the same for all buffers in the sequence. */
+ u32 sequence_number;
+ /* The total size of the sequence. */
+ u32 sequence_size;
+ } sequence_start;
+
+ /*
+ * HGSMI_BUFFER_HEADER_F_SEQ_CONTINUE and
+ * HGSMI_BUFFER_HEADER_F_SEQ_END
+ */
+ struct {
+ /* Must be the same for all buffers in the sequence. */
+ u32 sequence_number;
+ /* Data offset in the entire sequence. */
+ u32 sequence_offset;
+ } sequence_continue;
+ } u;
+} __packed;
+
+/* 8 bytes buffer tail. */
+struct hgsmi_buffer_tail {
+ /* Reserved, must be initialized to 0. */
+ u32 reserved;
+ /*
+ * One-at-a-Time Hash: http://www.burtleburtle.net/bob/hash/doobs.html
+ * Over the header, offset and for first 4 bytes of the tail.
+ */
+ u32 checksum;
+} __packed;
+
+/*
+ * The size of the array of channels. Array indexes are u8.
+ * Note: the value must not be changed.
+ */
+#define HGSMI_NUMBER_OF_CHANNELS 0x100
+
+#endif
diff --git a/drivers/staging/vboxvideo/modesetting.c b/drivers/staging/vboxvideo/modesetting.c
new file mode 100644
index 0000000..7616b8a
--- /dev/null
+++ b/drivers/staging/vboxvideo/modesetting.c
@@ -0,0 +1,142 @@
+/*
+ * Copyright (C) 2006-2017 Oracle Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "vbox_drv.h"
+#include "vbox_err.h"
+#include "vboxvideo_guest.h"
+#include "vboxvideo_vbe.h"
+#include "hgsmi_channels.h"
+
+/**
+ * Set a video mode via an HGSMI request. The views must have been
+ * initialised first using @a VBoxHGSMISendViewInfo and if the mode is being
+ * set on the first display then it must be set first using registers.
+ * @param ctx The context containing the heap to use
+ * @param display The screen number
+ * @param origin_x The horizontal displacement relative to the first scrn
+ * @param origin_y The vertical displacement relative to the first screen
+ * @param start_offset The offset of the visible area of the framebuffer
+ * relative to the framebuffer start
+ * @param pitch The offset in bytes between the starts of two adjecent
+ * scan lines in video RAM
+ * @param width The mode width
+ * @param height The mode height
+ * @param bpp The colour depth of the mode
+ * @param flags Flags
+ */
+void hgsmi_process_display_info(struct gen_pool *ctx, u32 display,
+ s32 origin_x, s32 origin_y, u32 start_offset,
+ u32 pitch, u32 width, u32 height,
+ u16 bpp, u16 flags)
+{
+ struct vbva_infoscreen *p;
+
+ p = hgsmi_buffer_alloc(ctx, sizeof(*p), HGSMI_CH_VBVA,
+ VBVA_INFO_SCREEN);
+ if (!p)
+ return;
+
+ p->view_index = display;
+ p->origin_x = origin_x;
+ p->origin_y = origin_y;
+ p->start_offset = start_offset;
+ p->line_size = pitch;
+ p->width = width;
+ p->height = height;
+ p->bits_per_pixel = bpp;
+ p->flags = flags;
+
+ hgsmi_buffer_submit(ctx, p);
+ hgsmi_buffer_free(ctx, p);
+}
+
+/**
+ * Report the rectangle relative to which absolute pointer events should be
+ * expressed. This information remains valid until the next VBVA resize event
+ * for any screen, at which time it is reset to the bounding rectangle of all
+ * virtual screens.
+ * @param ctx The context containing the heap to use.
+ * @param origin_x Upper left X co-ordinate relative to the first screen.
+ * @param origin_y Upper left Y co-ordinate relative to the first screen.
+ * @param width Rectangle width.
+ * @param height Rectangle height.
+ * @returns 0 on success, -errno on failure
+ */
+int hgsmi_update_input_mapping(struct gen_pool *ctx, s32 origin_x, s32 origin_y,
+ u32 width, u32 height)
+{
+ struct vbva_report_input_mapping *p;
+
+ p = hgsmi_buffer_alloc(ctx, sizeof(*p), HGSMI_CH_VBVA,
+ VBVA_REPORT_INPUT_MAPPING);
+ if (!p)
+ return -ENOMEM;
+
+ p->x = origin_x;
+ p->y = origin_y;
+ p->cx = width;
+ p->cy = height;
+
+ hgsmi_buffer_submit(ctx, p);
+ hgsmi_buffer_free(ctx, p);
+
+ return 0;
+}
+
+/**
+ * Get most recent video mode hints.
+ * @param ctx The context containing the heap to use.
+ * @param screens The number of screens to query hints for, starting at 0.
+ * @param hints Array of vbva_modehint structures for receiving the hints.
+ * @returns 0 on success, -errno on failure
+ */
+int hgsmi_get_mode_hints(struct gen_pool *ctx, unsigned int screens,
+ struct vbva_modehint *hints)
+{
+ struct vbva_query_mode_hints *p;
+ size_t size;
+
+ if (WARN_ON(!hints))
+ return -EINVAL;
+
+ size = screens * sizeof(struct vbva_modehint);
+ p = hgsmi_buffer_alloc(ctx, sizeof(*p) + size, HGSMI_CH_VBVA,
+ VBVA_QUERY_MODE_HINTS);
+ if (!p)
+ return -ENOMEM;
+
+ p->hints_queried_count = screens;
+ p->hint_structure_guest_size = sizeof(struct vbva_modehint);
+ p->rc = VERR_NOT_SUPPORTED;
+
+ hgsmi_buffer_submit(ctx, p);
+
+ if (RT_FAILURE(p->rc)) {
+ hgsmi_buffer_free(ctx, p);
+ return -EIO;
+ }
+
+ memcpy(hints, ((u8 *)p) + sizeof(struct vbva_query_mode_hints), size);
+ hgsmi_buffer_free(ctx, p);
+
+ return 0;
+}
diff --git a/drivers/staging/vboxvideo/vbox_drv.c b/drivers/staging/vboxvideo/vbox_drv.c
new file mode 100644
index 0000000..92ae156
--- /dev/null
+++ b/drivers/staging/vboxvideo/vbox_drv.c
@@ -0,0 +1,286 @@
+/*
+ * Copyright (C) 2013-2017 Oracle Corporation
+ * This file is based on ast_drv.c
+ * Copyright 2012 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * Authors: Dave Airlie <airlied@redhat.com>
+ * Michael Thayer <michael.thayer@oracle.com,
+ * Hans de Goede <hdegoede@redhat.com>
+ */
+#include <linux/module.h>
+#include <linux/console.h>
+#include <linux/vt_kern.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_crtc_helper.h>
+
+#include "vbox_drv.h"
+
+int vbox_modeset = -1;
+
+MODULE_PARM_DESC(modeset, "Disable/Enable modesetting");
+module_param_named(modeset, vbox_modeset, int, 0400);
+
+static struct drm_driver driver;
+
+static const struct pci_device_id pciidlist[] = {
+ { 0x80ee, 0xbeef, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { 0, 0, 0},
+};
+MODULE_DEVICE_TABLE(pci, pciidlist);
+
+static int vbox_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ return drm_get_pci_dev(pdev, ent, &driver);
+}
+
+static void vbox_pci_remove(struct pci_dev *pdev)
+{
+ struct drm_device *dev = pci_get_drvdata(pdev);
+
+ drm_put_dev(dev);
+}
+
+static int vbox_drm_freeze(struct drm_device *dev)
+{
+ struct vbox_private *vbox = dev->dev_private;
+
+ drm_kms_helper_poll_disable(dev);
+
+ pci_save_state(dev->pdev);
+
+ drm_fb_helper_set_suspend_unlocked(&vbox->fbdev->helper, true);
+
+ return 0;
+}
+
+static int vbox_drm_thaw(struct drm_device *dev)
+{
+ struct vbox_private *vbox = dev->dev_private;
+
+ drm_mode_config_reset(dev);
+ drm_helper_resume_force_mode(dev);
+ drm_fb_helper_set_suspend_unlocked(&vbox->fbdev->helper, false);
+
+ return 0;
+}
+
+static int vbox_drm_resume(struct drm_device *dev)
+{
+ int ret;
+
+ if (pci_enable_device(dev->pdev))
+ return -EIO;
+
+ ret = vbox_drm_thaw(dev);
+ if (ret)
+ return ret;
+
+ drm_kms_helper_poll_enable(dev);
+
+ return 0;
+}
+
+static int vbox_pm_suspend(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct drm_device *ddev = pci_get_drvdata(pdev);
+ int error;
+
+ error = vbox_drm_freeze(ddev);
+ if (error)
+ return error;
+
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, PCI_D3hot);
+
+ return 0;
+}
+
+static int vbox_pm_resume(struct device *dev)
+{
+ struct drm_device *ddev = pci_get_drvdata(to_pci_dev(dev));
+
+ return vbox_drm_resume(ddev);
+}
+
+static int vbox_pm_freeze(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct drm_device *ddev = pci_get_drvdata(pdev);
+
+ if (!ddev || !ddev->dev_private)
+ return -ENODEV;
+
+ return vbox_drm_freeze(ddev);
+}
+
+static int vbox_pm_thaw(struct device *dev)
+{
+ struct drm_device *ddev = pci_get_drvdata(to_pci_dev(dev));
+
+ return vbox_drm_thaw(ddev);
+}
+
+static int vbox_pm_poweroff(struct device *dev)
+{
+ struct drm_device *ddev = pci_get_drvdata(to_pci_dev(dev));
+
+ return vbox_drm_freeze(ddev);
+}
+
+static const struct dev_pm_ops vbox_pm_ops = {
+ .suspend = vbox_pm_suspend,
+ .resume = vbox_pm_resume,
+ .freeze = vbox_pm_freeze,
+ .thaw = vbox_pm_thaw,
+ .poweroff = vbox_pm_poweroff,
+ .restore = vbox_pm_resume,
+};
+
+static struct pci_driver vbox_pci_driver = {
+ .name = DRIVER_NAME,
+ .id_table = pciidlist,
+ .probe = vbox_pci_probe,
+ .remove = vbox_pci_remove,
+ .driver.pm = &vbox_pm_ops,
+};
+
+static const struct file_operations vbox_fops = {
+ .owner = THIS_MODULE,
+ .open = drm_open,
+ .release = drm_release,
+ .unlocked_ioctl = drm_ioctl,
+ .mmap = vbox_mmap,
+ .poll = drm_poll,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = drm_compat_ioctl,
+#endif
+ .read = drm_read,
+};
+
+static int vbox_master_set(struct drm_device *dev,
+ struct drm_file *file_priv, bool from_open)
+{
+ struct vbox_private *vbox = dev->dev_private;
+
+ /*
+ * We do not yet know whether the new owner can handle hotplug, so we
+ * do not advertise dynamic modes on the first query and send a
+ * tentative hotplug notification after that to see if they query again.
+ */
+ vbox->initial_mode_queried = false;
+
+ mutex_lock(&vbox->hw_mutex);
+ /*
+ * Disable VBVA when someone releases master in case the next person
+ * tries tries to do VESA.
+ */
+ /** @todo work out if anyone is likely to and whether it will work. */
+ /*
+ * Update: we also disable it because if the new master does not do
+ * dirty rectangle reporting (e.g. old versions of Plymouth) then at
+ * least the first screen will still be updated. We enable it as soon
+ * as we receive a dirty rectangle report.
+ */
+ vbox_disable_accel(vbox);
+ mutex_unlock(&vbox->hw_mutex);
+
+ return 0;
+}
+
+static void vbox_master_drop(struct drm_device *dev, struct drm_file *file_priv)
+{
+ struct vbox_private *vbox = dev->dev_private;
+
+ /* See vbox_master_set() */
+ vbox->initial_mode_queried = false;
+
+ mutex_lock(&vbox->hw_mutex);
+ vbox_disable_accel(vbox);
+ mutex_unlock(&vbox->hw_mutex);
+}
+
+static struct drm_driver driver = {
+ .driver_features =
+ DRIVER_MODESET | DRIVER_GEM | DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED |
+ DRIVER_PRIME,
+ .dev_priv_size = 0,
+
+ .load = vbox_driver_load,
+ .unload = vbox_driver_unload,
+ .lastclose = vbox_driver_lastclose,
+ .master_set = vbox_master_set,
+ .master_drop = vbox_master_drop,
+ .set_busid = drm_pci_set_busid,
+
+ .fops = &vbox_fops,
+ .irq_handler = vbox_irq_handler,
+ .name = DRIVER_NAME,
+ .desc = DRIVER_DESC,
+ .date = DRIVER_DATE,
+ .major = DRIVER_MAJOR,
+ .minor = DRIVER_MINOR,
+ .patchlevel = DRIVER_PATCHLEVEL,
+
+ .gem_free_object = vbox_gem_free_object,
+ .dumb_create = vbox_dumb_create,
+ .dumb_map_offset = vbox_dumb_mmap_offset,
+ .dumb_destroy = drm_gem_dumb_destroy,
+ .prime_handle_to_fd = drm_gem_prime_handle_to_fd,
+ .prime_fd_to_handle = drm_gem_prime_fd_to_handle,
+ .gem_prime_export = drm_gem_prime_export,
+ .gem_prime_import = drm_gem_prime_import,
+ .gem_prime_pin = vbox_gem_prime_pin,
+ .gem_prime_unpin = vbox_gem_prime_unpin,
+ .gem_prime_get_sg_table = vbox_gem_prime_get_sg_table,
+ .gem_prime_import_sg_table = vbox_gem_prime_import_sg_table,
+ .gem_prime_vmap = vbox_gem_prime_vmap,
+ .gem_prime_vunmap = vbox_gem_prime_vunmap,
+ .gem_prime_mmap = vbox_gem_prime_mmap,
+};
+
+static int __init vbox_init(void)
+{
+#ifdef CONFIG_VGA_CONSOLE
+ if (vgacon_text_force() && vbox_modeset == -1)
+ return -EINVAL;
+#endif
+
+ if (vbox_modeset == 0)
+ return -EINVAL;
+
+ return drm_pci_init(&driver, &vbox_pci_driver);
+}
+
+static void __exit vbox_exit(void)
+{
+ drm_pci_exit(&driver, &vbox_pci_driver);
+}
+
+module_init(vbox_init);
+module_exit(vbox_exit);
+
+MODULE_AUTHOR("Oracle Corporation");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL and additional rights");
diff --git a/drivers/staging/vboxvideo/vbox_drv.h b/drivers/staging/vboxvideo/vbox_drv.h
new file mode 100644
index 0000000..4b93027
--- /dev/null
+++ b/drivers/staging/vboxvideo/vbox_drv.h
@@ -0,0 +1,296 @@
+/*
+ * Copyright (C) 2013-2017 Oracle Corporation
+ * This file is based on ast_drv.h
+ * Copyright 2012 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * Authors: Dave Airlie <airlied@redhat.com>
+ * Michael Thayer <michael.thayer@oracle.com,
+ * Hans de Goede <hdegoede@redhat.com>
+ */
+#ifndef __VBOX_DRV_H__
+#define __VBOX_DRV_H__
+
+#include <linux/genalloc.h>
+#include <linux/io.h>
+#include <linux/string.h>
+#include <linux/version.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_encoder.h>
+#include <drm/drm_fb_helper.h>
+#include <drm/drm_gem.h>
+
+#include <drm/ttm/ttm_bo_api.h>
+#include <drm/ttm/ttm_bo_driver.h>
+#include <drm/ttm/ttm_placement.h>
+#include <drm/ttm/ttm_memory.h>
+#include <drm/ttm/ttm_module.h>
+
+#include "vboxvideo_guest.h"
+#include "vboxvideo_vbe.h"
+#include "hgsmi_ch_setup.h"
+
+#define DRIVER_NAME "vboxvideo"
+#define DRIVER_DESC "Oracle VM VirtualBox Graphics Card"
+#define DRIVER_DATE "20130823"
+
+#define DRIVER_MAJOR 1
+#define DRIVER_MINOR 0
+#define DRIVER_PATCHLEVEL 0
+
+#define VBOX_MAX_CURSOR_WIDTH 64
+#define VBOX_MAX_CURSOR_HEIGHT 64
+#define CURSOR_PIXEL_COUNT (VBOX_MAX_CURSOR_WIDTH * VBOX_MAX_CURSOR_HEIGHT)
+#define CURSOR_DATA_SIZE (CURSOR_PIXEL_COUNT * 4 + CURSOR_PIXEL_COUNT / 8)
+
+#define VBOX_MAX_SCREENS 32
+
+#define GUEST_HEAP_OFFSET(vbox) ((vbox)->full_vram_size - \
+ VBVA_ADAPTER_INFORMATION_SIZE)
+#define GUEST_HEAP_SIZE VBVA_ADAPTER_INFORMATION_SIZE
+#define GUEST_HEAP_USABLE_SIZE (VBVA_ADAPTER_INFORMATION_SIZE - \
+ sizeof(struct hgsmi_host_flags))
+#define HOST_FLAGS_OFFSET GUEST_HEAP_USABLE_SIZE
+
+struct vbox_fbdev;
+
+struct vbox_private {
+ struct drm_device *dev;
+
+ u8 __iomem *guest_heap;
+ u8 __iomem *vbva_buffers;
+ struct gen_pool *guest_pool;
+ struct vbva_buf_ctx *vbva_info;
+ bool any_pitch;
+ u32 num_crtcs;
+ /** Amount of available VRAM, including space used for buffers. */
+ u32 full_vram_size;
+ /** Amount of available VRAM, not including space used for buffers. */
+ u32 available_vram_size;
+ /** Array of structures for receiving mode hints. */
+ struct vbva_modehint *last_mode_hints;
+
+ struct vbox_fbdev *fbdev;
+
+ int fb_mtrr;
+
+ struct {
+ struct drm_global_reference mem_global_ref;
+ struct ttm_bo_global_ref bo_global_ref;
+ struct ttm_bo_device bdev;
+ } ttm;
+
+ struct mutex hw_mutex; /* protects modeset and accel/vbva accesses */
+ /**
+ * We decide whether or not user-space supports display hot-plug
+ * depending on whether they react to a hot-plug event after the initial
+ * mode query.
+ */
+ bool initial_mode_queried;
+ struct work_struct hotplug_work;
+ u32 input_mapping_width;
+ u32 input_mapping_height;
+ /**
+ * Is user-space using an X.Org-style layout of one large frame-buffer
+ * encompassing all screen ones or is the fbdev console active?
+ */
+ bool single_framebuffer;
+ u32 cursor_width;
+ u32 cursor_height;
+ u32 cursor_hot_x;
+ u32 cursor_hot_y;
+ size_t cursor_data_size;
+ u8 cursor_data[CURSOR_DATA_SIZE];
+};
+
+#undef CURSOR_PIXEL_COUNT
+#undef CURSOR_DATA_SIZE
+
+int vbox_driver_load(struct drm_device *dev, unsigned long flags);
+void vbox_driver_unload(struct drm_device *dev);
+void vbox_driver_lastclose(struct drm_device *dev);
+
+struct vbox_gem_object;
+
+struct vbox_connector {
+ struct drm_connector base;
+ char name[32];
+ struct vbox_crtc *vbox_crtc;
+ struct {
+ u16 width;
+ u16 height;
+ bool disconnected;
+ } mode_hint;
+};
+
+struct vbox_crtc {
+ struct drm_crtc base;
+ bool blanked;
+ bool disconnected;
+ unsigned int crtc_id;
+ u32 fb_offset;
+ bool cursor_enabled;
+ u16 x_hint;
+ u16 y_hint;
+};
+
+struct vbox_encoder {
+ struct drm_encoder base;
+};
+
+struct vbox_framebuffer {
+ struct drm_framebuffer base;
+ struct drm_gem_object *obj;
+};
+
+struct vbox_fbdev {
+ struct drm_fb_helper helper;
+ struct vbox_framebuffer afb;
+ int size;
+ struct ttm_bo_kmap_obj mapping;
+ int x1, y1, x2, y2; /* dirty rect */
+ spinlock_t dirty_lock;
+};
+
+#define to_vbox_crtc(x) container_of(x, struct vbox_crtc, base)
+#define to_vbox_connector(x) container_of(x, struct vbox_connector, base)
+#define to_vbox_encoder(x) container_of(x, struct vbox_encoder, base)
+#define to_vbox_framebuffer(x) container_of(x, struct vbox_framebuffer, base)
+
+int vbox_mode_init(struct drm_device *dev);
+void vbox_mode_fini(struct drm_device *dev);
+
+#define DRM_MODE_FB_CMD drm_mode_fb_cmd2
+#define CRTC_FB(crtc) ((crtc)->primary->fb)
+
+void vbox_enable_accel(struct vbox_private *vbox);
+void vbox_disable_accel(struct vbox_private *vbox);
+void vbox_report_caps(struct vbox_private *vbox);
+
+void vbox_framebuffer_dirty_rectangles(struct drm_framebuffer *fb,
+ struct drm_clip_rect *rects,
+ unsigned int num_rects);
+
+int vbox_framebuffer_init(struct drm_device *dev,
+ struct vbox_framebuffer *vbox_fb,
+ const struct DRM_MODE_FB_CMD *mode_cmd,
+ struct drm_gem_object *obj);
+
+int vbox_fbdev_init(struct drm_device *dev);
+void vbox_fbdev_fini(struct drm_device *dev);
+void vbox_fbdev_set_base(struct vbox_private *vbox, unsigned long gpu_addr);
+
+struct vbox_bo {
+ struct ttm_buffer_object bo;
+ struct ttm_placement placement;
+ struct ttm_bo_kmap_obj kmap;
+ struct drm_gem_object gem;
+ struct ttm_place placements[3];
+ int pin_count;
+};
+
+#define gem_to_vbox_bo(gobj) container_of((gobj), struct vbox_bo, gem)
+
+static inline struct vbox_bo *vbox_bo(struct ttm_buffer_object *bo)
+{
+ return container_of(bo, struct vbox_bo, bo);
+}
+
+#define to_vbox_obj(x) container_of(x, struct vbox_gem_object, base)
+
+int vbox_dumb_create(struct drm_file *file,
+ struct drm_device *dev,
+ struct drm_mode_create_dumb *args);
+
+void vbox_gem_free_object(struct drm_gem_object *obj);
+int vbox_dumb_mmap_offset(struct drm_file *file,
+ struct drm_device *dev,
+ u32 handle, u64 *offset);
+
+#define DRM_FILE_PAGE_OFFSET (0x10000000ULL >> PAGE_SHIFT)
+
+int vbox_mm_init(struct vbox_private *vbox);
+void vbox_mm_fini(struct vbox_private *vbox);
+
+int vbox_bo_create(struct drm_device *dev, int size, int align,
+ u32 flags, struct vbox_bo **pvboxbo);
+
+int vbox_gem_create(struct drm_device *dev,
+ u32 size, bool iskernel, struct drm_gem_object **obj);
+
+int vbox_bo_pin(struct vbox_bo *bo, u32 pl_flag, u64 *gpu_addr);
+int vbox_bo_unpin(struct vbox_bo *bo);
+
+static inline int vbox_bo_reserve(struct vbox_bo *bo, bool no_wait)
+{
+ int ret;
+
+ ret = ttm_bo_reserve(&bo->bo, true, no_wait, NULL);
+ if (ret) {
+ if (ret != -ERESTARTSYS && ret != -EBUSY)
+ DRM_ERROR("reserve failed %p\n", bo);
+ return ret;
+ }
+ return 0;
+}
+
+static inline void vbox_bo_unreserve(struct vbox_bo *bo)
+{
+ ttm_bo_unreserve(&bo->bo);
+}
+
+void vbox_ttm_placement(struct vbox_bo *bo, int domain);
+int vbox_bo_push_sysram(struct vbox_bo *bo);
+int vbox_mmap(struct file *filp, struct vm_area_struct *vma);
+
+/* vbox_prime.c */
+int vbox_gem_prime_pin(struct drm_gem_object *obj);
+void vbox_gem_prime_unpin(struct drm_gem_object *obj);
+struct sg_table *vbox_gem_prime_get_sg_table(struct drm_gem_object *obj);
+struct drm_gem_object *vbox_gem_prime_import_sg_table(
+ struct drm_device *dev, struct dma_buf_attachment *attach,
+ struct sg_table *table);
+void *vbox_gem_prime_vmap(struct drm_gem_object *obj);
+void vbox_gem_prime_vunmap(struct drm_gem_object *obj, void *vaddr);
+int vbox_gem_prime_mmap(struct drm_gem_object *obj,
+ struct vm_area_struct *area);
+
+/* vbox_irq.c */
+int vbox_irq_init(struct vbox_private *vbox);
+void vbox_irq_fini(struct vbox_private *vbox);
+void vbox_report_hotplug(struct vbox_private *vbox);
+irqreturn_t vbox_irq_handler(int irq, void *arg);
+
+/* vbox_hgsmi.c */
+void *hgsmi_buffer_alloc(struct gen_pool *guest_pool, size_t size,
+ u8 channel, u16 channel_info);
+void hgsmi_buffer_free(struct gen_pool *guest_pool, void *buf);
+int hgsmi_buffer_submit(struct gen_pool *guest_pool, void *buf);
+
+static inline void vbox_write_ioport(u16 index, u16 data)
+{
+ outw(index, VBE_DISPI_IOPORT_INDEX);
+ outw(data, VBE_DISPI_IOPORT_DATA);
+}
+
+#endif
diff --git a/drivers/staging/vboxvideo/vbox_err.h b/drivers/staging/vboxvideo/vbox_err.h
new file mode 100644
index 0000000..562db86
--- /dev/null
+++ b/drivers/staging/vboxvideo/vbox_err.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2017 Oracle Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef __VBOX_ERR_H__
+#define __VBOX_ERR_H__
+
+/**
+ * @name VirtualBox virtual-hardware error macros
+ * @{
+ */
+
+#define VINF_SUCCESS 0
+#define VERR_INVALID_PARAMETER (-2)
+#define VERR_INVALID_POINTER (-6)
+#define VERR_NO_MEMORY (-8)
+#define VERR_NOT_IMPLEMENTED (-12)
+#define VERR_INVALID_FUNCTION (-36)
+#define VERR_NOT_SUPPORTED (-37)
+#define VERR_TOO_MUCH_DATA (-42)
+#define VERR_INVALID_STATE (-79)
+#define VERR_OUT_OF_RESOURCES (-80)
+#define VERR_ALREADY_EXISTS (-105)
+#define VERR_INTERNAL_ERROR (-225)
+
+#define RT_SUCCESS_NP(rc) ((int)(rc) >= VINF_SUCCESS)
+#define RT_SUCCESS(rc) (likely(RT_SUCCESS_NP(rc)))
+#define RT_FAILURE(rc) (unlikely(!RT_SUCCESS_NP(rc)))
+
+/** @} */
+
+#endif
diff --git a/drivers/staging/vboxvideo/vbox_fb.c b/drivers/staging/vboxvideo/vbox_fb.c
new file mode 100644
index 0000000..35f6d9f
--- /dev/null
+++ b/drivers/staging/vboxvideo/vbox_fb.c
@@ -0,0 +1,412 @@
+/*
+ * Copyright (C) 2013-2017 Oracle Corporation
+ * This file is based on ast_fb.c
+ * Copyright 2012 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * Authors: Dave Airlie <airlied@redhat.com>
+ * Michael Thayer <michael.thayer@oracle.com,
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/sysrq.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_fb_helper.h>
+#include <drm/drm_crtc_helper.h>
+
+#include "vbox_drv.h"
+#include "vboxvideo.h"
+
+#define VBOX_DIRTY_DELAY (HZ / 30)
+/**
+ * Tell the host about dirty rectangles to update.
+ */
+static void vbox_dirty_update(struct vbox_fbdev *fbdev,
+ int x, int y, int width, int height)
+{
+ struct drm_gem_object *obj;
+ struct vbox_bo *bo;
+ int ret = -EBUSY;
+ bool store_for_later = false;
+ int x2, y2;
+ unsigned long flags;
+ struct drm_clip_rect rect;
+
+ obj = fbdev->afb.obj;
+ bo = gem_to_vbox_bo(obj);
+
+ /*
+ * try and reserve the BO, if we fail with busy
+ * then the BO is being moved and we should
+ * store up the damage until later.
+ */
+ if (drm_can_sleep())
+ ret = vbox_bo_reserve(bo, true);
+ if (ret) {
+ if (ret != -EBUSY)
+ return;
+
+ store_for_later = true;
+ }
+
+ x2 = x + width - 1;
+ y2 = y + height - 1;
+ spin_lock_irqsave(&fbdev->dirty_lock, flags);
+
+ if (fbdev->y1 < y)
+ y = fbdev->y1;
+ if (fbdev->y2 > y2)
+ y2 = fbdev->y2;
+ if (fbdev->x1 < x)
+ x = fbdev->x1;
+ if (fbdev->x2 > x2)
+ x2 = fbdev->x2;
+
+ if (store_for_later) {
+ fbdev->x1 = x;
+ fbdev->x2 = x2;
+ fbdev->y1 = y;
+ fbdev->y2 = y2;
+ spin_unlock_irqrestore(&fbdev->dirty_lock, flags);
+ return;
+ }
+
+ fbdev->x1 = INT_MAX;
+ fbdev->y1 = INT_MAX;
+ fbdev->x2 = 0;
+ fbdev->y2 = 0;
+
+ spin_unlock_irqrestore(&fbdev->dirty_lock, flags);
+
+ /*
+ * Not sure why the original code subtracted 1 here, but I will keep
+ * it that way to avoid unnecessary differences.
+ */
+ rect.x1 = x;
+ rect.x2 = x2 + 1;
+ rect.y1 = y;
+ rect.y2 = y2 + 1;
+ vbox_framebuffer_dirty_rectangles(&fbdev->afb.base, &rect, 1);
+
+ vbox_bo_unreserve(bo);
+}
+
+#ifdef CONFIG_FB_DEFERRED_IO
+static void vbox_deferred_io(struct fb_info *info, struct list_head *pagelist)
+{
+ struct vbox_fbdev *fbdev = info->par;
+ unsigned long start, end, min, max;
+ struct page *page;
+ int y1, y2;
+
+ min = ULONG_MAX;
+ max = 0;
+ list_for_each_entry(page, pagelist, lru) {
+ start = page->index << PAGE_SHIFT;
+ end = start + PAGE_SIZE - 1;
+ min = min(min, start);
+ max = max(max, end);
+ }
+
+ if (min < max) {
+ y1 = min / info->fix.line_length;
+ y2 = (max / info->fix.line_length) + 1;
+ DRM_INFO("%s: Calling dirty update: 0, %d, %d, %d\n",
+ __func__, y1, info->var.xres, y2 - y1 - 1);
+ vbox_dirty_update(fbdev, 0, y1, info->var.xres, y2 - y1 - 1);
+ }
+}
+
+static struct fb_deferred_io vbox_defio = {
+ .delay = VBOX_DIRTY_DELAY,
+ .deferred_io = vbox_deferred_io,
+};
+#endif
+
+static void vbox_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
+{
+ struct vbox_fbdev *fbdev = info->par;
+
+ sys_fillrect(info, rect);
+ vbox_dirty_update(fbdev, rect->dx, rect->dy, rect->width, rect->height);
+}
+
+static void vbox_copyarea(struct fb_info *info, const struct fb_copyarea *area)
+{
+ struct vbox_fbdev *fbdev = info->par;
+
+ sys_copyarea(info, area);
+ vbox_dirty_update(fbdev, area->dx, area->dy, area->width, area->height);
+}
+
+static void vbox_imageblit(struct fb_info *info, const struct fb_image *image)
+{
+ struct vbox_fbdev *fbdev = info->par;
+
+ sys_imageblit(info, image);
+ vbox_dirty_update(fbdev, image->dx, image->dy, image->width,
+ image->height);
+}
+
+static struct fb_ops vboxfb_ops = {
+ .owner = THIS_MODULE,
+ .fb_check_var = drm_fb_helper_check_var,
+ .fb_set_par = drm_fb_helper_set_par,
+ .fb_fillrect = vbox_fillrect,
+ .fb_copyarea = vbox_copyarea,
+ .fb_imageblit = vbox_imageblit,
+ .fb_pan_display = drm_fb_helper_pan_display,
+ .fb_blank = drm_fb_helper_blank,
+ .fb_setcmap = drm_fb_helper_setcmap,
+ .fb_debug_enter = drm_fb_helper_debug_enter,
+ .fb_debug_leave = drm_fb_helper_debug_leave,
+};
+
+static int vboxfb_create_object(struct vbox_fbdev *fbdev,
+ struct DRM_MODE_FB_CMD *mode_cmd,
+ struct drm_gem_object **gobj_p)
+{
+ struct drm_device *dev = fbdev->helper.dev;
+ u32 size;
+ struct drm_gem_object *gobj;
+ u32 pitch = mode_cmd->pitches[0];
+ int ret;
+
+ size = pitch * mode_cmd->height;
+ ret = vbox_gem_create(dev, size, true, &gobj);
+ if (ret)
+ return ret;
+
+ *gobj_p = gobj;
+
+ return 0;
+}
+
+static int vboxfb_create(struct drm_fb_helper *helper,
+ struct drm_fb_helper_surface_size *sizes)
+{
+ struct vbox_fbdev *fbdev =
+ container_of(helper, struct vbox_fbdev, helper);
+ struct drm_device *dev = fbdev->helper.dev;
+ struct DRM_MODE_FB_CMD mode_cmd;
+ struct drm_framebuffer *fb;
+ struct fb_info *info;
+ struct device *device = &dev->pdev->dev;
+ struct drm_gem_object *gobj;
+ struct vbox_bo *bo;
+ int size, ret;
+ u32 pitch;
+
+ mode_cmd.width = sizes->surface_width;
+ mode_cmd.height = sizes->surface_height;
+ pitch = mode_cmd.width * ((sizes->surface_bpp + 7) / 8);
+ mode_cmd.pixel_format = drm_mode_legacy_fb_format(sizes->surface_bpp,
+ sizes->surface_depth);
+ mode_cmd.pitches[0] = pitch;
+
+ size = pitch * mode_cmd.height;
+
+ ret = vboxfb_create_object(fbdev, &mode_cmd, &gobj);
+ if (ret) {
+ DRM_ERROR("failed to create fbcon backing object %d\n", ret);
+ return ret;
+ }
+
+ ret = vbox_framebuffer_init(dev, &fbdev->afb, &mode_cmd, gobj);
+ if (ret)
+ return ret;
+
+ bo = gem_to_vbox_bo(gobj);
+
+ ret = vbox_bo_reserve(bo, false);
+ if (ret)
+ return ret;
+
+ ret = vbox_bo_pin(bo, TTM_PL_FLAG_VRAM, NULL);
+ if (ret) {
+ vbox_bo_unreserve(bo);
+ return ret;
+ }
+
+ ret = ttm_bo_kmap(&bo->bo, 0, bo->bo.num_pages, &bo->kmap);
+ vbox_bo_unreserve(bo);
+ if (ret) {
+ DRM_ERROR("failed to kmap fbcon\n");
+ return ret;
+ }
+
+ info = framebuffer_alloc(0, device);
+ if (!info)
+ return -ENOMEM;
+ info->par = fbdev;
+
+ fbdev->size = size;
+
+ fb = &fbdev->afb.base;
+ fbdev->helper.fb = fb;
+ fbdev->helper.fbdev = info;
+
+ strcpy(info->fix.id, "vboxdrmfb");
+
+ /*
+ * The last flag forces a mode set on VT switches even if the kernel
+ * does not think it is needed.
+ */
+ info->flags = FBINFO_DEFAULT | FBINFO_CAN_FORCE_OUTPUT |
+ FBINFO_MISC_ALWAYS_SETPAR;
+ info->fbops = &vboxfb_ops;
+
+ ret = fb_alloc_cmap(&info->cmap, 256, 0);
+ if (ret)
+ return -ENOMEM;
+
+ /*
+ * This seems to be done for safety checking that the framebuffer
+ * is not registered twice by different drivers.
+ */
+ info->apertures = alloc_apertures(1);
+ if (!info->apertures)
+ return -ENOMEM;
+ info->apertures->ranges[0].base = pci_resource_start(dev->pdev, 0);
+ info->apertures->ranges[0].size = pci_resource_len(dev->pdev, 0);
+
+ drm_fb_helper_fill_fix(info, fb->pitches[0], fb->format->depth);
+ drm_fb_helper_fill_var(info, &fbdev->helper, sizes->fb_width,
+ sizes->fb_height);
+
+ info->screen_base = bo->kmap.virtual;
+ info->screen_size = size;
+
+#ifdef CONFIG_FB_DEFERRED_IO
+ info->fbdefio = &vbox_defio;
+ fb_deferred_io_init(info);
+#endif
+
+ info->pixmap.flags = FB_PIXMAP_SYSTEM;
+
+ DRM_DEBUG_KMS("allocated %dx%d\n", fb->width, fb->height);
+
+ return 0;
+}
+
+static void vbox_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
+ u16 blue, int regno)
+{
+}
+
+static void vbox_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
+ u16 *blue, int regno)
+{
+ *red = regno;
+ *green = regno;
+ *blue = regno;
+}
+
+static struct drm_fb_helper_funcs vbox_fb_helper_funcs = {
+ .gamma_set = vbox_fb_gamma_set,
+ .gamma_get = vbox_fb_gamma_get,
+ .fb_probe = vboxfb_create,
+};
+
+void vbox_fbdev_fini(struct drm_device *dev)
+{
+ struct vbox_private *vbox = dev->dev_private;
+ struct vbox_fbdev *fbdev = vbox->fbdev;
+ struct vbox_framebuffer *afb = &fbdev->afb;
+
+ drm_fb_helper_unregister_fbi(&fbdev->helper);
+
+ if (afb->obj) {
+ struct vbox_bo *bo = gem_to_vbox_bo(afb->obj);
+
+ if (!vbox_bo_reserve(bo, false)) {
+ if (bo->kmap.virtual)
+ ttm_bo_kunmap(&bo->kmap);
+ /*
+ * QXL does this, but is it really needed before
+ * freeing?
+ */
+ if (bo->pin_count)
+ vbox_bo_unpin(bo);
+ vbox_bo_unreserve(bo);
+ }
+ drm_gem_object_unreference_unlocked(afb->obj);
+ afb->obj = NULL;
+ }
+ drm_fb_helper_fini(&fbdev->helper);
+
+ drm_framebuffer_unregister_private(&afb->base);
+ drm_framebuffer_cleanup(&afb->base);
+}
+
+int vbox_fbdev_init(struct drm_device *dev)
+{
+ struct vbox_private *vbox = dev->dev_private;
+ struct vbox_fbdev *fbdev;
+ int ret;
+
+ fbdev = devm_kzalloc(dev->dev, sizeof(*fbdev), GFP_KERNEL);
+ if (!fbdev)
+ return -ENOMEM;
+
+ vbox->fbdev = fbdev;
+ spin_lock_init(&fbdev->dirty_lock);
+
+ drm_fb_helper_prepare(dev, &fbdev->helper, &vbox_fb_helper_funcs);
+ ret = drm_fb_helper_init(dev, &fbdev->helper, vbox->num_crtcs);
+ if (ret)
+ return ret;
+
+ ret = drm_fb_helper_single_add_all_connectors(&fbdev->helper);
+ if (ret)
+ goto err_fini;
+
+ /* disable all the possible outputs/crtcs before entering KMS mode */
+ drm_helper_disable_unused_functions(dev);
+
+ ret = drm_fb_helper_initial_config(&fbdev->helper, 32);
+ if (ret)
+ goto err_fini;
+
+ return 0;
+
+err_fini:
+ drm_fb_helper_fini(&fbdev->helper);
+ return ret;
+}
+
+void vbox_fbdev_set_base(struct vbox_private *vbox, unsigned long gpu_addr)
+{
+ struct fb_info *fbdev = vbox->fbdev->helper.fbdev;
+
+ fbdev->fix.smem_start = fbdev->apertures->ranges[0].base + gpu_addr;
+ fbdev->fix.smem_len = vbox->available_vram_size - gpu_addr;
+}
diff --git a/drivers/staging/vboxvideo/vbox_hgsmi.c b/drivers/staging/vboxvideo/vbox_hgsmi.c
new file mode 100644
index 0000000..822fd31
--- /dev/null
+++ b/drivers/staging/vboxvideo/vbox_hgsmi.c
@@ -0,0 +1,115 @@
+/*
+ * Copyright (C) 2017 Oracle Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * Authors: Hans de Goede <hdegoede@redhat.com>
+ */
+
+#include "vbox_drv.h"
+#include "vboxvideo_vbe.h"
+#include "hgsmi_defs.h"
+
+/* One-at-a-Time Hash from http://www.burtleburtle.net/bob/hash/doobs.html */
+static u32 hgsmi_hash_process(u32 hash, const u8 *data, int size)
+{
+ while (size--) {
+ hash += *data++;
+ hash += (hash << 10);
+ hash ^= (hash >> 6);
+ }
+
+ return hash;
+}
+
+static u32 hgsmi_hash_end(u32 hash)
+{
+ hash += (hash << 3);
+ hash ^= (hash >> 11);
+ hash += (hash << 15);
+
+ return hash;
+}
+
+/* Not really a checksum but that is the naming used in all vbox code */
+static u32 hgsmi_checksum(u32 offset,
+ const struct hgsmi_buffer_header *header,
+ const struct hgsmi_buffer_tail *tail)
+{
+ u32 checksum;
+
+ checksum = hgsmi_hash_process(0, (u8 *)&offset, sizeof(offset));
+ checksum = hgsmi_hash_process(checksum, (u8 *)header, sizeof(*header));
+ /* 4 -> Do not checksum the checksum itself */
+ checksum = hgsmi_hash_process(checksum, (u8 *)tail, 4);
+
+ return hgsmi_hash_end(checksum);
+}
+
+void *hgsmi_buffer_alloc(struct gen_pool *guest_pool, size_t size,
+ u8 channel, u16 channel_info)
+{
+ struct hgsmi_buffer_header *h;
+ struct hgsmi_buffer_tail *t;
+ size_t total_size;
+ dma_addr_t offset;
+
+ total_size = size + sizeof(*h) + sizeof(*t);
+ h = gen_pool_dma_alloc(guest_pool, total_size, &offset);
+ if (!h)
+ return NULL;
+
+ t = (struct hgsmi_buffer_tail *)((u8 *)h + sizeof(*h) + size);
+
+ h->flags = HGSMI_BUFFER_HEADER_F_SEQ_SINGLE;
+ h->data_size = size;
+ h->channel = channel;
+ h->channel_info = channel_info;
+ memset(&h->u.header_data, 0, sizeof(h->u.header_data));
+
+ t->reserved = 0;
+ t->checksum = hgsmi_checksum(offset, h, t);
+
+ return (u8 *)h + sizeof(*h);
+}
+
+void hgsmi_buffer_free(struct gen_pool *guest_pool, void *buf)
+{
+ struct hgsmi_buffer_header *h =
+ (struct hgsmi_buffer_header *)((u8 *)buf - sizeof(*h));
+ size_t total_size = h->data_size + sizeof(*h) +
+ sizeof(struct hgsmi_buffer_tail);
+
+ gen_pool_free(guest_pool, (unsigned long)h, total_size);
+}
+
+int hgsmi_buffer_submit(struct gen_pool *guest_pool, void *buf)
+{
+ phys_addr_t offset;
+
+ offset = gen_pool_virt_to_phys(guest_pool, (unsigned long)buf -
+ sizeof(struct hgsmi_buffer_header));
+ outl(offset, VGA_PORT_HGSMI_GUEST);
+ /* Make the compiler aware that the host has changed memory. */
+ mb();
+
+ return 0;
+}
diff --git a/drivers/staging/vboxvideo/vbox_irq.c b/drivers/staging/vboxvideo/vbox_irq.c
new file mode 100644
index 0000000..3ca8bec
--- /dev/null
+++ b/drivers/staging/vboxvideo/vbox_irq.c
@@ -0,0 +1,197 @@
+/*
+ * Copyright (C) 2016-2017 Oracle Corporation
+ * This file is based on qxl_irq.c
+ * Copyright 2013 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ * Alon Levy
+ * Michael Thayer <michael.thayer@oracle.com,
+ * Hans de Goede <hdegoede@redhat.com>
+ */
+
+#include <drm/drm_crtc_helper.h>
+
+#include "vbox_drv.h"
+#include "vboxvideo.h"
+
+static void vbox_clear_irq(void)
+{
+ outl((u32)~0, VGA_PORT_HGSMI_HOST);
+}
+
+static u32 vbox_get_flags(struct vbox_private *vbox)
+{
+ return readl(vbox->guest_heap + HOST_FLAGS_OFFSET);
+}
+
+void vbox_report_hotplug(struct vbox_private *vbox)
+{
+ schedule_work(&vbox->hotplug_work);
+}
+
+irqreturn_t vbox_irq_handler(int irq, void *arg)
+{
+ struct drm_device *dev = (struct drm_device *)arg;
+ struct vbox_private *vbox = (struct vbox_private *)dev->dev_private;
+ u32 host_flags = vbox_get_flags(vbox);
+
+ if (!(host_flags & HGSMIHOSTFLAGS_IRQ))
+ return IRQ_NONE;
+
+ /*
+ * Due to a bug in the initial host implementation of hot-plug irqs,
+ * the hot-plug and cursor capability flags were never cleared.
+ * Fortunately we can tell when they would have been set by checking
+ * that the VSYNC flag is not set.
+ */
+ if (host_flags &
+ (HGSMIHOSTFLAGS_HOTPLUG | HGSMIHOSTFLAGS_CURSOR_CAPABILITIES) &&
+ !(host_flags & HGSMIHOSTFLAGS_VSYNC))
+ vbox_report_hotplug(vbox);
+
+ vbox_clear_irq();
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * Check that the position hints provided by the host are suitable for GNOME
+ * shell (i.e. all screens disjoint and hints for all enabled screens) and if
+ * not replace them with default ones. Providing valid hints improves the
+ * chances that we will get a known screen layout for pointer mapping.
+ */
+static void validate_or_set_position_hints(struct vbox_private *vbox)
+{
+ struct vbva_modehint *hintsi, *hintsj;
+ bool valid = true;
+ u16 currentx = 0;
+ int i, j;
+
+ for (i = 0; i < vbox->num_crtcs; ++i) {
+ for (j = 0; j < i; ++j) {
+ hintsi = &vbox->last_mode_hints[i];
+ hintsj = &vbox->last_mode_hints[j];
+
+ if (hintsi->enabled && hintsj->enabled) {
+ if (hintsi->dx >= 0xffff ||
+ hintsi->dy >= 0xffff ||
+ hintsj->dx >= 0xffff ||
+ hintsj->dy >= 0xffff ||
+ (hintsi->dx <
+ hintsj->dx + (hintsj->cx & 0x8fff) &&
+ hintsi->dx + (hintsi->cx & 0x8fff) >
+ hintsj->dx) ||
+ (hintsi->dy <
+ hintsj->dy + (hintsj->cy & 0x8fff) &&
+ hintsi->dy + (hintsi->cy & 0x8fff) >
+ hintsj->dy))
+ valid = false;
+ }
+ }
+ }
+ if (!valid)
+ for (i = 0; i < vbox->num_crtcs; ++i) {
+ if (vbox->last_mode_hints[i].enabled) {
+ vbox->last_mode_hints[i].dx = currentx;
+ vbox->last_mode_hints[i].dy = 0;
+ currentx +=
+ vbox->last_mode_hints[i].cx & 0x8fff;
+ }
+ }
+}
+
+/**
+ * Query the host for the most recent video mode hints.
+ */
+static void vbox_update_mode_hints(struct vbox_private *vbox)
+{
+ struct drm_device *dev = vbox->dev;
+ struct drm_connector *connector;
+ struct vbox_connector *vbox_conn;
+ struct vbva_modehint *hints;
+ u16 flags;
+ bool disconnected;
+ unsigned int crtc_id;
+ int ret;
+
+ ret = hgsmi_get_mode_hints(vbox->guest_pool, vbox->num_crtcs,
+ vbox->last_mode_hints);
+ if (ret) {
+ DRM_ERROR("vboxvideo: hgsmi_get_mode_hints failed: %d\n", ret);
+ return;
+ }
+
+ validate_or_set_position_hints(vbox);
+ drm_modeset_lock_all(dev);
+ list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+ vbox_conn = to_vbox_connector(connector);
+
+ hints = &vbox->last_mode_hints[vbox_conn->vbox_crtc->crtc_id];
+ if (hints->magic != VBVAMODEHINT_MAGIC)
+ continue;
+
+ disconnected = !(hints->enabled);
+ crtc_id = vbox_conn->vbox_crtc->crtc_id;
+ vbox_conn->mode_hint.width = hints->cx & 0x8fff;
+ vbox_conn->mode_hint.height = hints->cy & 0x8fff;
+ vbox_conn->vbox_crtc->x_hint = hints->dx;
+ vbox_conn->vbox_crtc->y_hint = hints->dy;
+ vbox_conn->mode_hint.disconnected = disconnected;
+
+ if (vbox_conn->vbox_crtc->disconnected == disconnected)
+ continue;
+
+ if (disconnected)
+ flags = VBVA_SCREEN_F_ACTIVE | VBVA_SCREEN_F_DISABLED;
+ else
+ flags = VBVA_SCREEN_F_ACTIVE | VBVA_SCREEN_F_BLANK;
+
+ hgsmi_process_display_info(vbox->guest_pool, crtc_id, 0, 0, 0,
+ hints->cx * 4, hints->cx,
+ hints->cy, 0, flags);
+
+ vbox_conn->vbox_crtc->disconnected = disconnected;
+ }
+ drm_modeset_unlock_all(dev);
+}
+
+static void vbox_hotplug_worker(struct work_struct *work)
+{
+ struct vbox_private *vbox = container_of(work, struct vbox_private,
+ hotplug_work);
+
+ vbox_update_mode_hints(vbox);
+ drm_kms_helper_hotplug_event(vbox->dev);
+}
+
+int vbox_irq_init(struct vbox_private *vbox)
+{
+ INIT_WORK(&vbox->hotplug_work, vbox_hotplug_worker);
+ vbox_update_mode_hints(vbox);
+
+ return drm_irq_install(vbox->dev, vbox->dev->pdev->irq);
+}
+
+void vbox_irq_fini(struct vbox_private *vbox)
+{
+ drm_irq_uninstall(vbox->dev);
+ flush_work(&vbox->hotplug_work);
+}
diff --git a/drivers/staging/vboxvideo/vbox_main.c b/drivers/staging/vboxvideo/vbox_main.c
new file mode 100644
index 0000000..d0c6ec7
--- /dev/null
+++ b/drivers/staging/vboxvideo/vbox_main.c
@@ -0,0 +1,534 @@
+/*
+ * Copyright (C) 2013-2017 Oracle Corporation
+ * This file is based on ast_main.c
+ * Copyright 2012 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * Authors: Dave Airlie <airlied@redhat.com>,
+ * Michael Thayer <michael.thayer@oracle.com,
+ * Hans de Goede <hdegoede@redhat.com>
+ */
+#include <drm/drm_fb_helper.h>
+#include <drm/drm_crtc_helper.h>
+
+#include "vbox_drv.h"
+#include "vbox_err.h"
+#include "vboxvideo_guest.h"
+#include "vboxvideo_vbe.h"
+
+static void vbox_user_framebuffer_destroy(struct drm_framebuffer *fb)
+{
+ struct vbox_framebuffer *vbox_fb = to_vbox_framebuffer(fb);
+
+ if (vbox_fb->obj)
+ drm_gem_object_unreference_unlocked(vbox_fb->obj);
+
+ drm_framebuffer_cleanup(fb);
+ kfree(fb);
+}
+
+void vbox_enable_accel(struct vbox_private *vbox)
+{
+ unsigned int i;
+ struct vbva_buffer *vbva;
+
+ if (!vbox->vbva_info || !vbox->vbva_buffers) {
+ /* Should never happen... */
+ DRM_ERROR("vboxvideo: failed to set up VBVA.\n");
+ return;
+ }
+
+ for (i = 0; i < vbox->num_crtcs; ++i) {
+ if (vbox->vbva_info[i].vbva)
+ continue;
+
+ vbva = (void *)vbox->vbva_buffers + i * VBVA_MIN_BUFFER_SIZE;
+ if (!vbva_enable(&vbox->vbva_info[i],
+ vbox->guest_pool, vbva, i)) {
+ /* very old host or driver error. */
+ DRM_ERROR("vboxvideo: vbva_enable failed\n");
+ return;
+ }
+ }
+}
+
+void vbox_disable_accel(struct vbox_private *vbox)
+{
+ unsigned int i;
+
+ for (i = 0; i < vbox->num_crtcs; ++i)
+ vbva_disable(&vbox->vbva_info[i], vbox->guest_pool, i);
+}
+
+void vbox_report_caps(struct vbox_private *vbox)
+{
+ u32 caps = VBVACAPS_DISABLE_CURSOR_INTEGRATION |
+ VBVACAPS_IRQ | VBVACAPS_USE_VBVA_ONLY;
+
+ if (vbox->initial_mode_queried)
+ caps |= VBVACAPS_VIDEO_MODE_HINTS;
+
+ hgsmi_send_caps_info(vbox->guest_pool, caps);
+}
+
+/**
+ * Send information about dirty rectangles to VBVA. If necessary we enable
+ * VBVA first, as this is normally disabled after a change of master in case
+ * the new master does not send dirty rectangle information (is this even
+ * allowed?)
+ */
+void vbox_framebuffer_dirty_rectangles(struct drm_framebuffer *fb,
+ struct drm_clip_rect *rects,
+ unsigned int num_rects)
+{
+ struct vbox_private *vbox = fb->dev->dev_private;
+ struct drm_crtc *crtc;
+ unsigned int i;
+
+ mutex_lock(&vbox->hw_mutex);
+ list_for_each_entry(crtc, &fb->dev->mode_config.crtc_list, head) {
+ if (CRTC_FB(crtc) != fb)
+ continue;
+
+ vbox_enable_accel(vbox);
+
+ for (i = 0; i < num_rects; ++i) {
+ struct vbva_cmd_hdr cmd_hdr;
+ unsigned int crtc_id = to_vbox_crtc(crtc)->crtc_id;
+
+ if ((rects[i].x1 > crtc->x + crtc->hwmode.hdisplay) ||
+ (rects[i].y1 > crtc->y + crtc->hwmode.vdisplay) ||
+ (rects[i].x2 < crtc->x) ||
+ (rects[i].y2 < crtc->y))
+ continue;
+
+ cmd_hdr.x = (s16)rects[i].x1;
+ cmd_hdr.y = (s16)rects[i].y1;
+ cmd_hdr.w = (u16)rects[i].x2 - rects[i].x1;
+ cmd_hdr.h = (u16)rects[i].y2 - rects[i].y1;
+
+ if (!vbva_buffer_begin_update(&vbox->vbva_info[crtc_id],
+ vbox->guest_pool))
+ continue;
+
+ vbva_write(&vbox->vbva_info[crtc_id], vbox->guest_pool,
+ &cmd_hdr, sizeof(cmd_hdr));
+ vbva_buffer_end_update(&vbox->vbva_info[crtc_id]);
+ }
+ }
+ mutex_unlock(&vbox->hw_mutex);
+}
+
+static int vbox_user_framebuffer_dirty(struct drm_framebuffer *fb,
+ struct drm_file *file_priv,
+ unsigned int flags, unsigned int color,
+ struct drm_clip_rect *rects,
+ unsigned int num_rects)
+{
+ vbox_framebuffer_dirty_rectangles(fb, rects, num_rects);
+
+ return 0;
+}
+
+static const struct drm_framebuffer_funcs vbox_fb_funcs = {
+ .destroy = vbox_user_framebuffer_destroy,
+ .dirty = vbox_user_framebuffer_dirty,
+};
+
+int vbox_framebuffer_init(struct drm_device *dev,
+ struct vbox_framebuffer *vbox_fb,
+ const struct DRM_MODE_FB_CMD *mode_cmd,
+ struct drm_gem_object *obj)
+{
+ int ret;
+
+ drm_helper_mode_fill_fb_struct(dev, &vbox_fb->base, mode_cmd);
+ vbox_fb->obj = obj;
+ ret = drm_framebuffer_init(dev, &vbox_fb->base, &vbox_fb_funcs);
+ if (ret) {
+ DRM_ERROR("framebuffer init failed %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct drm_framebuffer *vbox_user_framebuffer_create(
+ struct drm_device *dev,
+ struct drm_file *filp,
+ const struct drm_mode_fb_cmd2 *mode_cmd)
+{
+ struct drm_gem_object *obj;
+ struct vbox_framebuffer *vbox_fb;
+ int ret = -ENOMEM;
+
+ obj = drm_gem_object_lookup(filp, mode_cmd->handles[0]);
+ if (!obj)
+ return ERR_PTR(-ENOENT);
+
+ vbox_fb = kzalloc(sizeof(*vbox_fb), GFP_KERNEL);
+ if (!vbox_fb)
+ goto err_unref_obj;
+
+ ret = vbox_framebuffer_init(dev, vbox_fb, mode_cmd, obj);
+ if (ret)
+ goto err_free_vbox_fb;
+
+ return &vbox_fb->base;
+
+err_free_vbox_fb:
+ kfree(vbox_fb);
+err_unref_obj:
+ drm_gem_object_unreference_unlocked(obj);
+ return ERR_PTR(ret);
+}
+
+static const struct drm_mode_config_funcs vbox_mode_funcs = {
+ .fb_create = vbox_user_framebuffer_create,
+};
+
+static int vbox_accel_init(struct vbox_private *vbox)
+{
+ unsigned int i;
+
+ vbox->vbva_info = devm_kcalloc(vbox->dev->dev, vbox->num_crtcs,
+ sizeof(*vbox->vbva_info), GFP_KERNEL);
+ if (!vbox->vbva_info)
+ return -ENOMEM;
+
+ /* Take a command buffer for each screen from the end of usable VRAM. */
+ vbox->available_vram_size -= vbox->num_crtcs * VBVA_MIN_BUFFER_SIZE;
+
+ vbox->vbva_buffers = pci_iomap_range(vbox->dev->pdev, 0,
+ vbox->available_vram_size,
+ vbox->num_crtcs *
+ VBVA_MIN_BUFFER_SIZE);
+ if (!vbox->vbva_buffers)
+ return -ENOMEM;
+
+ for (i = 0; i < vbox->num_crtcs; ++i)
+ vbva_setup_buffer_context(&vbox->vbva_info[i],
+ vbox->available_vram_size +
+ i * VBVA_MIN_BUFFER_SIZE,
+ VBVA_MIN_BUFFER_SIZE);
+
+ return 0;
+}
+
+static void vbox_accel_fini(struct vbox_private *vbox)
+{
+ vbox_disable_accel(vbox);
+ pci_iounmap(vbox->dev->pdev, vbox->vbva_buffers);
+}
+
+/** Do we support the 4.3 plus mode hint reporting interface? */
+static bool have_hgsmi_mode_hints(struct vbox_private *vbox)
+{
+ u32 have_hints, have_cursor;
+ int ret;
+
+ ret = hgsmi_query_conf(vbox->guest_pool,
+ VBOX_VBVA_CONF32_MODE_HINT_REPORTING,
+ &have_hints);
+ if (ret)
+ return false;
+
+ ret = hgsmi_query_conf(vbox->guest_pool,
+ VBOX_VBVA_CONF32_GUEST_CURSOR_REPORTING,
+ &have_cursor);
+ if (ret)
+ return false;
+
+ return have_hints == VINF_SUCCESS && have_cursor == VINF_SUCCESS;
+}
+
+static bool vbox_check_supported(u16 id)
+{
+ u16 dispi_id;
+
+ vbox_write_ioport(VBE_DISPI_INDEX_ID, id);
+ dispi_id = inw(VBE_DISPI_IOPORT_DATA);
+
+ return dispi_id == id;
+}
+
+/**
+ * Set up our heaps and data exchange buffers in VRAM before handing the rest
+ * to the memory manager.
+ */
+static int vbox_hw_init(struct vbox_private *vbox)
+{
+ int ret = -ENOMEM;
+
+ vbox->full_vram_size = inl(VBE_DISPI_IOPORT_DATA);
+ vbox->any_pitch = vbox_check_supported(VBE_DISPI_ID_ANYX);
+
+ DRM_INFO("VRAM %08x\n", vbox->full_vram_size);
+
+ /* Map guest-heap at end of vram */
+ vbox->guest_heap =
+ pci_iomap_range(vbox->dev->pdev, 0, GUEST_HEAP_OFFSET(vbox),
+ GUEST_HEAP_SIZE);
+ if (!vbox->guest_heap)
+ return -ENOMEM;
+
+ /* Create guest-heap mem-pool use 2^4 = 16 byte chunks */
+ vbox->guest_pool = gen_pool_create(4, -1);
+ if (!vbox->guest_pool)
+ goto err_unmap_guest_heap;
+
+ ret = gen_pool_add_virt(vbox->guest_pool,
+ (unsigned long)vbox->guest_heap,
+ GUEST_HEAP_OFFSET(vbox),
+ GUEST_HEAP_USABLE_SIZE, -1);
+ if (ret)
+ goto err_destroy_guest_pool;
+
+ ret = hgsmi_test_query_conf(vbox->guest_pool);
+ if (ret) {
+ DRM_ERROR("vboxvideo: hgsmi_test_query_conf failed\n");
+ goto err_destroy_guest_pool;
+ }
+
+ /* Reduce available VRAM size to reflect the guest heap. */
+ vbox->available_vram_size = GUEST_HEAP_OFFSET(vbox);
+ /* Linux drm represents monitors as a 32-bit array. */
+ hgsmi_query_conf(vbox->guest_pool, VBOX_VBVA_CONF32_MONITOR_COUNT,
+ &vbox->num_crtcs);
+ vbox->num_crtcs = clamp_t(u32, vbox->num_crtcs, 1, VBOX_MAX_SCREENS);
+
+ if (!have_hgsmi_mode_hints(vbox)) {
+ ret = -ENOTSUPP;
+ goto err_destroy_guest_pool;
+ }
+
+ vbox->last_mode_hints = devm_kcalloc(vbox->dev->dev, vbox->num_crtcs,
+ sizeof(struct vbva_modehint),
+ GFP_KERNEL);
+ if (!vbox->last_mode_hints) {
+ ret = -ENOMEM;
+ goto err_destroy_guest_pool;
+ }
+
+ ret = vbox_accel_init(vbox);
+ if (ret)
+ goto err_destroy_guest_pool;
+
+ return 0;
+
+err_destroy_guest_pool:
+ gen_pool_destroy(vbox->guest_pool);
+err_unmap_guest_heap:
+ pci_iounmap(vbox->dev->pdev, vbox->guest_heap);
+ return ret;
+}
+
+static void vbox_hw_fini(struct vbox_private *vbox)
+{
+ vbox_accel_fini(vbox);
+ gen_pool_destroy(vbox->guest_pool);
+ pci_iounmap(vbox->dev->pdev, vbox->guest_heap);
+}
+
+int vbox_driver_load(struct drm_device *dev, unsigned long flags)
+{
+ struct vbox_private *vbox;
+ int ret = 0;
+
+ if (!vbox_check_supported(VBE_DISPI_ID_HGSMI))
+ return -ENODEV;
+
+ vbox = devm_kzalloc(dev->dev, sizeof(*vbox), GFP_KERNEL);
+ if (!vbox)
+ return -ENOMEM;
+
+ dev->dev_private = vbox;
+ vbox->dev = dev;
+
+ mutex_init(&vbox->hw_mutex);
+
+ ret = vbox_hw_init(vbox);
+ if (ret)
+ return ret;
+
+ ret = vbox_mm_init(vbox);
+ if (ret)
+ goto err_hw_fini;
+
+ drm_mode_config_init(dev);
+
+ dev->mode_config.funcs = (void *)&vbox_mode_funcs;
+ dev->mode_config.min_width = 64;
+ dev->mode_config.min_height = 64;
+ dev->mode_config.preferred_depth = 24;
+ dev->mode_config.max_width = VBE_DISPI_MAX_XRES;
+ dev->mode_config.max_height = VBE_DISPI_MAX_YRES;
+
+ ret = vbox_mode_init(dev);
+ if (ret)
+ goto err_drm_mode_cleanup;
+
+ ret = vbox_irq_init(vbox);
+ if (ret)
+ goto err_mode_fini;
+
+ ret = vbox_fbdev_init(dev);
+ if (ret)
+ goto err_irq_fini;
+
+ return 0;
+
+err_irq_fini:
+ vbox_irq_fini(vbox);
+err_mode_fini:
+ vbox_mode_fini(dev);
+err_drm_mode_cleanup:
+ drm_mode_config_cleanup(dev);
+ vbox_mm_fini(vbox);
+err_hw_fini:
+ vbox_hw_fini(vbox);
+ return ret;
+}
+
+void vbox_driver_unload(struct drm_device *dev)
+{
+ struct vbox_private *vbox = dev->dev_private;
+
+ vbox_fbdev_fini(dev);
+ vbox_irq_fini(vbox);
+ vbox_mode_fini(dev);
+ drm_mode_config_cleanup(dev);
+ vbox_mm_fini(vbox);
+ vbox_hw_fini(vbox);
+}
+
+/**
+ * @note this is described in the DRM framework documentation. AST does not
+ * have it, but we get an oops on driver unload if it is not present.
+ */
+void vbox_driver_lastclose(struct drm_device *dev)
+{
+ struct vbox_private *vbox = dev->dev_private;
+
+ if (vbox->fbdev)
+ drm_fb_helper_restore_fbdev_mode_unlocked(&vbox->fbdev->helper);
+}
+
+int vbox_gem_create(struct drm_device *dev,
+ u32 size, bool iskernel, struct drm_gem_object **obj)
+{
+ struct vbox_bo *vboxbo;
+ int ret;
+
+ *obj = NULL;
+
+ size = roundup(size, PAGE_SIZE);
+ if (size == 0)
+ return -EINVAL;
+
+ ret = vbox_bo_create(dev, size, 0, 0, &vboxbo);
+ if (ret) {
+ if (ret != -ERESTARTSYS)
+ DRM_ERROR("failed to allocate GEM object\n");
+ return ret;
+ }
+
+ *obj = &vboxbo->gem;
+
+ return 0;
+}
+
+int vbox_dumb_create(struct drm_file *file,
+ struct drm_device *dev, struct drm_mode_create_dumb *args)
+{
+ int ret;
+ struct drm_gem_object *gobj;
+ u32 handle;
+
+ args->pitch = args->width * ((args->bpp + 7) / 8);
+ args->size = args->pitch * args->height;
+
+ ret = vbox_gem_create(dev, args->size, false, &gobj);
+ if (ret)
+ return ret;
+
+ ret = drm_gem_handle_create(file, gobj, &handle);
+ drm_gem_object_unreference_unlocked(gobj);
+ if (ret)
+ return ret;
+
+ args->handle = handle;
+
+ return 0;
+}
+
+static void vbox_bo_unref(struct vbox_bo **bo)
+{
+ struct ttm_buffer_object *tbo;
+
+ if ((*bo) == NULL)
+ return;
+
+ tbo = &((*bo)->bo);
+ ttm_bo_unref(&tbo);
+ if (!tbo)
+ *bo = NULL;
+}
+
+void vbox_gem_free_object(struct drm_gem_object *obj)
+{
+ struct vbox_bo *vbox_bo = gem_to_vbox_bo(obj);
+
+ vbox_bo_unref(&vbox_bo);
+}
+
+static inline u64 vbox_bo_mmap_offset(struct vbox_bo *bo)
+{
+ return drm_vma_node_offset_addr(&bo->bo.vma_node);
+}
+
+int
+vbox_dumb_mmap_offset(struct drm_file *file,
+ struct drm_device *dev,
+ u32 handle, u64 *offset)
+{
+ struct drm_gem_object *obj;
+ int ret;
+ struct vbox_bo *bo;
+
+ mutex_lock(&dev->struct_mutex);
+ obj = drm_gem_object_lookup(file, handle);
+ if (!obj) {
+ ret = -ENOENT;
+ goto out_unlock;
+ }
+
+ bo = gem_to_vbox_bo(obj);
+ *offset = vbox_bo_mmap_offset(bo);
+
+ drm_gem_object_unreference(obj);
+ ret = 0;
+
+out_unlock:
+ mutex_unlock(&dev->struct_mutex);
+ return ret;
+}
diff --git a/drivers/staging/vboxvideo/vbox_mode.c b/drivers/staging/vboxvideo/vbox_mode.c
new file mode 100644
index 0000000..f2b85f3
--- /dev/null
+++ b/drivers/staging/vboxvideo/vbox_mode.c
@@ -0,0 +1,877 @@
+/*
+ * Copyright (C) 2013-2017 Oracle Corporation
+ * This file is based on ast_mode.c
+ * Copyright 2012 Red Hat Inc.
+ * Parts based on xf86-video-ast
+ * Copyright (c) 2005 ASPEED Technology Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ */
+/*
+ * Authors: Dave Airlie <airlied@redhat.com>
+ * Michael Thayer <michael.thayer@oracle.com,
+ * Hans de Goede <hdegoede@redhat.com>
+ */
+#include <linux/export.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_plane_helper.h>
+
+#include "vbox_drv.h"
+#include "vboxvideo.h"
+#include "hgsmi_channels.h"
+
+static int vbox_cursor_set2(struct drm_crtc *crtc, struct drm_file *file_priv,
+ u32 handle, u32 width, u32 height,
+ s32 hot_x, s32 hot_y);
+static int vbox_cursor_move(struct drm_crtc *crtc, int x, int y);
+
+/**
+ * Set a graphics mode. Poke any required values into registers, do an HGSMI
+ * mode set and tell the host we support advanced graphics functions.
+ */
+static void vbox_do_modeset(struct drm_crtc *crtc,
+ const struct drm_display_mode *mode)
+{
+ struct vbox_crtc *vbox_crtc = to_vbox_crtc(crtc);
+ struct vbox_private *vbox;
+ int width, height, bpp, pitch;
+ unsigned int crtc_id;
+ u16 flags;
+ s32 x_offset, y_offset;
+
+ vbox = crtc->dev->dev_private;
+ width = mode->hdisplay ? mode->hdisplay : 640;
+ height = mode->vdisplay ? mode->vdisplay : 480;
+ crtc_id = vbox_crtc->crtc_id;
+ bpp = crtc->enabled ? CRTC_FB(crtc)->format->cpp[0] * 8 : 32;
+ pitch = crtc->enabled ? CRTC_FB(crtc)->pitches[0] : width * bpp / 8;
+ x_offset = vbox->single_framebuffer ? crtc->x : vbox_crtc->x_hint;
+ y_offset = vbox->single_framebuffer ? crtc->y : vbox_crtc->y_hint;
+
+ /*
+ * This is the old way of setting graphics modes. It assumed one screen
+ * and a frame-buffer at the start of video RAM. On older versions of
+ * VirtualBox, certain parts of the code still assume that the first
+ * screen is programmed this way, so try to fake it.
+ */
+ if (vbox_crtc->crtc_id == 0 && crtc->enabled &&
+ vbox_crtc->fb_offset / pitch < 0xffff - crtc->y &&
+ vbox_crtc->fb_offset % (bpp / 8) == 0) {
+ vbox_write_ioport(VBE_DISPI_INDEX_XRES, width);
+ vbox_write_ioport(VBE_DISPI_INDEX_YRES, height);
+ vbox_write_ioport(VBE_DISPI_INDEX_VIRT_WIDTH, pitch * 8 / bpp);
+ vbox_write_ioport(VBE_DISPI_INDEX_BPP,
+ CRTC_FB(crtc)->format->cpp[0] * 8);
+ vbox_write_ioport(VBE_DISPI_INDEX_ENABLE, VBE_DISPI_ENABLED);
+ vbox_write_ioport(
+ VBE_DISPI_INDEX_X_OFFSET,
+ vbox_crtc->fb_offset % pitch / bpp * 8 + crtc->x);
+ vbox_write_ioport(VBE_DISPI_INDEX_Y_OFFSET,
+ vbox_crtc->fb_offset / pitch + crtc->y);
+ }
+
+ flags = VBVA_SCREEN_F_ACTIVE;
+ flags |= (crtc->enabled && !vbox_crtc->blanked) ?
+ 0 : VBVA_SCREEN_F_BLANK;
+ flags |= vbox_crtc->disconnected ? VBVA_SCREEN_F_DISABLED : 0;
+ hgsmi_process_display_info(vbox->guest_pool, vbox_crtc->crtc_id,
+ x_offset, y_offset,
+ crtc->x * bpp / 8 + crtc->y * pitch,
+ pitch, width, height,
+ vbox_crtc->blanked ? 0 : bpp, flags);
+}
+
+static int vbox_set_view(struct drm_crtc *crtc)
+{
+ struct vbox_crtc *vbox_crtc = to_vbox_crtc(crtc);
+ struct vbox_private *vbox = crtc->dev->dev_private;
+ struct vbva_infoview *p;
+
+ /*
+ * Tell the host about the view. This design originally targeted the
+ * Windows XP driver architecture and assumed that each screen would
+ * have a dedicated frame buffer with the command buffer following it,
+ * the whole being a "view". The host works out which screen a command
+ * buffer belongs to by checking whether it is in the first view, then
+ * whether it is in the second and so on. The first match wins. We
+ * cheat around this by making the first view be the managed memory
+ * plus the first command buffer, the second the same plus the second
+ * buffer and so on.
+ */
+ p = hgsmi_buffer_alloc(vbox->guest_pool, sizeof(*p),
+ HGSMI_CH_VBVA, VBVA_INFO_VIEW);
+ if (!p)
+ return -ENOMEM;
+
+ p->view_index = vbox_crtc->crtc_id;
+ p->view_offset = vbox_crtc->fb_offset;
+ p->view_size = vbox->available_vram_size - vbox_crtc->fb_offset +
+ vbox_crtc->crtc_id * VBVA_MIN_BUFFER_SIZE;
+ p->max_screen_size = vbox->available_vram_size - vbox_crtc->fb_offset;
+
+ hgsmi_buffer_submit(vbox->guest_pool, p);
+ hgsmi_buffer_free(vbox->guest_pool, p);
+
+ return 0;
+}
+
+static void vbox_crtc_load_lut(struct drm_crtc *crtc)
+{
+}
+
+static void vbox_crtc_dpms(struct drm_crtc *crtc, int mode)
+{
+ struct vbox_crtc *vbox_crtc = to_vbox_crtc(crtc);
+ struct vbox_private *vbox = crtc->dev->dev_private;
+
+ switch (mode) {
+ case DRM_MODE_DPMS_ON:
+ vbox_crtc->blanked = false;
+ break;
+ case DRM_MODE_DPMS_STANDBY:
+ case DRM_MODE_DPMS_SUSPEND:
+ case DRM_MODE_DPMS_OFF:
+ vbox_crtc->blanked = true;
+ break;
+ }
+
+ mutex_lock(&vbox->hw_mutex);
+ vbox_do_modeset(crtc, &crtc->hwmode);
+ mutex_unlock(&vbox->hw_mutex);
+}
+
+static bool vbox_crtc_mode_fixup(struct drm_crtc *crtc,
+ const struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ return true;
+}
+
+/*
+ * Try to map the layout of virtual screens to the range of the input device.
+ * Return true if we need to re-set the crtc modes due to screen offset
+ * changes.
+ */
+static bool vbox_set_up_input_mapping(struct vbox_private *vbox)
+{
+ struct drm_crtc *crtci;
+ struct drm_connector *connectori;
+ struct drm_framebuffer *fb1 = NULL;
+ bool single_framebuffer = true;
+ bool old_single_framebuffer = vbox->single_framebuffer;
+ u16 width = 0, height = 0;
+
+ /*
+ * Are we using an X.Org-style single large frame-buffer for all crtcs?
+ * If so then screen layout can be deduced from the crtc offsets.
+ * Same fall-back if this is the fbdev frame-buffer.
+ */
+ list_for_each_entry(crtci, &vbox->dev->mode_config.crtc_list, head) {
+ if (!fb1) {
+ fb1 = CRTC_FB(crtci);
+ if (to_vbox_framebuffer(fb1) == &vbox->fbdev->afb)
+ break;
+ } else if (CRTC_FB(crtci) && fb1 != CRTC_FB(crtci)) {
+ single_framebuffer = false;
+ }
+ }
+ if (single_framebuffer) {
+ list_for_each_entry(crtci, &vbox->dev->mode_config.crtc_list,
+ head) {
+ if (to_vbox_crtc(crtci)->crtc_id != 0)
+ continue;
+
+ vbox->single_framebuffer = true;
+ vbox->input_mapping_width = CRTC_FB(crtci)->width;
+ vbox->input_mapping_height = CRTC_FB(crtci)->height;
+ return old_single_framebuffer !=
+ vbox->single_framebuffer;
+ }
+ }
+ /* Otherwise calculate the total span of all screens. */
+ list_for_each_entry(connectori, &vbox->dev->mode_config.connector_list,
+ head) {
+ struct vbox_connector *vbox_connector =
+ to_vbox_connector(connectori);
+ struct vbox_crtc *vbox_crtc = vbox_connector->vbox_crtc;
+
+ width = max_t(u16, width, vbox_crtc->x_hint +
+ vbox_connector->mode_hint.width);
+ height = max_t(u16, height, vbox_crtc->y_hint +
+ vbox_connector->mode_hint.height);
+ }
+
+ vbox->single_framebuffer = false;
+ vbox->input_mapping_width = width;
+ vbox->input_mapping_height = height;
+
+ return old_single_framebuffer != vbox->single_framebuffer;
+}
+
+static int vbox_crtc_do_set_base(struct drm_crtc *crtc,
+ struct drm_framebuffer *old_fb, int x, int y)
+{
+ struct vbox_private *vbox = crtc->dev->dev_private;
+ struct vbox_crtc *vbox_crtc = to_vbox_crtc(crtc);
+ struct drm_gem_object *obj;
+ struct vbox_framebuffer *vbox_fb;
+ struct vbox_bo *bo;
+ int ret;
+ u64 gpu_addr;
+
+ /* Unpin the previous fb. */
+ if (old_fb) {
+ vbox_fb = to_vbox_framebuffer(old_fb);
+ obj = vbox_fb->obj;
+ bo = gem_to_vbox_bo(obj);
+ ret = vbox_bo_reserve(bo, false);
+ if (ret)
+ return ret;
+
+ vbox_bo_unpin(bo);
+ vbox_bo_unreserve(bo);
+ }
+
+ vbox_fb = to_vbox_framebuffer(CRTC_FB(crtc));
+ obj = vbox_fb->obj;
+ bo = gem_to_vbox_bo(obj);
+
+ ret = vbox_bo_reserve(bo, false);
+ if (ret)
+ return ret;
+
+ ret = vbox_bo_pin(bo, TTM_PL_FLAG_VRAM, &gpu_addr);
+ if (ret) {
+ vbox_bo_unreserve(bo);
+ return ret;
+ }
+
+ if (&vbox->fbdev->afb == vbox_fb)
+ vbox_fbdev_set_base(vbox, gpu_addr);
+ vbox_bo_unreserve(bo);
+
+ /* vbox_set_start_address_crt1(crtc, (u32)gpu_addr); */
+ vbox_crtc->fb_offset = gpu_addr;
+ if (vbox_set_up_input_mapping(vbox)) {
+ struct drm_crtc *crtci;
+
+ list_for_each_entry(crtci, &vbox->dev->mode_config.crtc_list,
+ head) {
+ vbox_set_view(crtc);
+ vbox_do_modeset(crtci, &crtci->mode);
+ }
+ }
+
+ return 0;
+}
+
+static int vbox_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
+ struct drm_framebuffer *old_fb)
+{
+ return vbox_crtc_do_set_base(crtc, old_fb, x, y);
+}
+
+static int vbox_crtc_mode_set(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode,
+ int x, int y, struct drm_framebuffer *old_fb)
+{
+ struct vbox_private *vbox = crtc->dev->dev_private;
+ int ret;
+
+ vbox_crtc_mode_set_base(crtc, x, y, old_fb);
+
+ mutex_lock(&vbox->hw_mutex);
+ ret = vbox_set_view(crtc);
+ if (!ret)
+ vbox_do_modeset(crtc, mode);
+ hgsmi_update_input_mapping(vbox->guest_pool, 0, 0,
+ vbox->input_mapping_width,
+ vbox->input_mapping_height);
+ mutex_unlock(&vbox->hw_mutex);
+
+ return ret;
+}
+
+static void vbox_crtc_disable(struct drm_crtc *crtc)
+{
+}
+
+static void vbox_crtc_prepare(struct drm_crtc *crtc)
+{
+}
+
+static void vbox_crtc_commit(struct drm_crtc *crtc)
+{
+}
+
+static const struct drm_crtc_helper_funcs vbox_crtc_helper_funcs = {
+ .dpms = vbox_crtc_dpms,
+ .mode_fixup = vbox_crtc_mode_fixup,
+ .mode_set = vbox_crtc_mode_set,
+ /* .mode_set_base = vbox_crtc_mode_set_base, */
+ .disable = vbox_crtc_disable,
+ .load_lut = vbox_crtc_load_lut,
+ .prepare = vbox_crtc_prepare,
+ .commit = vbox_crtc_commit,
+};
+
+static void vbox_crtc_reset(struct drm_crtc *crtc)
+{
+}
+
+static void vbox_crtc_destroy(struct drm_crtc *crtc)
+{
+ drm_crtc_cleanup(crtc);
+ kfree(crtc);
+}
+
+static const struct drm_crtc_funcs vbox_crtc_funcs = {
+ .cursor_move = vbox_cursor_move,
+ .cursor_set2 = vbox_cursor_set2,
+ .reset = vbox_crtc_reset,
+ .set_config = drm_crtc_helper_set_config,
+ /* .gamma_set = vbox_crtc_gamma_set, */
+ .destroy = vbox_crtc_destroy,
+};
+
+static struct vbox_crtc *vbox_crtc_init(struct drm_device *dev, unsigned int i)
+{
+ struct vbox_crtc *vbox_crtc;
+
+ vbox_crtc = kzalloc(sizeof(*vbox_crtc), GFP_KERNEL);
+ if (!vbox_crtc)
+ return NULL;
+
+ vbox_crtc->crtc_id = i;
+
+ drm_crtc_init(dev, &vbox_crtc->base, &vbox_crtc_funcs);
+ drm_mode_crtc_set_gamma_size(&vbox_crtc->base, 256);
+ drm_crtc_helper_add(&vbox_crtc->base, &vbox_crtc_helper_funcs);
+
+ return vbox_crtc;
+}
+
+static void vbox_encoder_destroy(struct drm_encoder *encoder)
+{
+ drm_encoder_cleanup(encoder);
+ kfree(encoder);
+}
+
+static struct drm_encoder *vbox_best_single_encoder(struct drm_connector
+ *connector)
+{
+ int enc_id = connector->encoder_ids[0];
+
+ /* pick the encoder ids */
+ if (enc_id)
+ return drm_encoder_find(connector->dev, enc_id);
+
+ return NULL;
+}
+
+static const struct drm_encoder_funcs vbox_enc_funcs = {
+ .destroy = vbox_encoder_destroy,
+};
+
+static void vbox_encoder_dpms(struct drm_encoder *encoder, int mode)
+{
+}
+
+static bool vbox_mode_fixup(struct drm_encoder *encoder,
+ const struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ return true;
+}
+
+static void vbox_encoder_mode_set(struct drm_encoder *encoder,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+}
+
+static void vbox_encoder_prepare(struct drm_encoder *encoder)
+{
+}
+
+static void vbox_encoder_commit(struct drm_encoder *encoder)
+{
+}
+
+static const struct drm_encoder_helper_funcs vbox_enc_helper_funcs = {
+ .dpms = vbox_encoder_dpms,
+ .mode_fixup = vbox_mode_fixup,
+ .prepare = vbox_encoder_prepare,
+ .commit = vbox_encoder_commit,
+ .mode_set = vbox_encoder_mode_set,
+};
+
+static struct drm_encoder *vbox_encoder_init(struct drm_device *dev,
+ unsigned int i)
+{
+ struct vbox_encoder *vbox_encoder;
+
+ vbox_encoder = kzalloc(sizeof(*vbox_encoder), GFP_KERNEL);
+ if (!vbox_encoder)
+ return NULL;
+
+ drm_encoder_init(dev, &vbox_encoder->base, &vbox_enc_funcs,
+ DRM_MODE_ENCODER_DAC, NULL);
+ drm_encoder_helper_add(&vbox_encoder->base, &vbox_enc_helper_funcs);
+
+ vbox_encoder->base.possible_crtcs = 1 << i;
+ return &vbox_encoder->base;
+}
+
+/**
+ * Generate EDID data with a mode-unique serial number for the virtual
+ * monitor to try to persuade Unity that different modes correspond to
+ * different monitors and it should not try to force the same resolution on
+ * them.
+ */
+static void vbox_set_edid(struct drm_connector *connector, int width,
+ int height)
+{
+ enum { EDID_SIZE = 128 };
+ unsigned char edid[EDID_SIZE] = {
+ 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, /* header */
+ 0x58, 0x58, /* manufacturer (VBX) */
+ 0x00, 0x00, /* product code */
+ 0x00, 0x00, 0x00, 0x00, /* serial number goes here */
+ 0x01, /* week of manufacture */
+ 0x00, /* year of manufacture */
+ 0x01, 0x03, /* EDID version */
+ 0x80, /* capabilities - digital */
+ 0x00, /* horiz. res in cm, zero for projectors */
+ 0x00, /* vert. res in cm */
+ 0x78, /* display gamma (120 == 2.2). */
+ 0xEE, /* features (standby, suspend, off, RGB, std */
+ /* colour space, preferred timing mode) */
+ 0xEE, 0x91, 0xA3, 0x54, 0x4C, 0x99, 0x26, 0x0F, 0x50, 0x54,
+ /* chromaticity for standard colour space. */
+ 0x00, 0x00, 0x00, /* no default timings */
+ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+ 0x01, 0x01,
+ 0x01, 0x01, 0x01, 0x01, /* no standard timings */
+ 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x06, 0x00, 0x02, 0x02,
+ 0x02, 0x02,
+ /* descriptor block 1 goes below */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ /* descriptor block 2, monitor ranges */
+ 0x00, 0x00, 0x00, 0xFD, 0x00,
+ 0x00, 0xC8, 0x00, 0xC8, 0x64, 0x00, 0x0A, 0x20, 0x20, 0x20,
+ 0x20, 0x20,
+ /* 0-200Hz vertical, 0-200KHz horizontal, 1000MHz pixel clock */
+ 0x20,
+ /* descriptor block 3, monitor name */
+ 0x00, 0x00, 0x00, 0xFC, 0x00,
+ 'V', 'B', 'O', 'X', ' ', 'm', 'o', 'n', 'i', 't', 'o', 'r',
+ '\n',
+ /* descriptor block 4: dummy data */
+ 0x00, 0x00, 0x00, 0x10, 0x00,
+ 0x0A, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20,
+ 0x00, /* number of extensions */
+ 0x00 /* checksum goes here */
+ };
+ int clock = (width + 6) * (height + 6) * 60 / 10000;
+ unsigned int i, sum = 0;
+
+ edid[12] = width & 0xff;
+ edid[13] = width >> 8;
+ edid[14] = height & 0xff;
+ edid[15] = height >> 8;
+ edid[54] = clock & 0xff;
+ edid[55] = clock >> 8;
+ edid[56] = width & 0xff;
+ edid[58] = (width >> 4) & 0xf0;
+ edid[59] = height & 0xff;
+ edid[61] = (height >> 4) & 0xf0;
+ for (i = 0; i < EDID_SIZE - 1; ++i)
+ sum += edid[i];
+ edid[EDID_SIZE - 1] = (0x100 - (sum & 0xFF)) & 0xFF;
+ drm_mode_connector_update_edid_property(connector, (struct edid *)edid);
+}
+
+static int vbox_get_modes(struct drm_connector *connector)
+{
+ struct vbox_connector *vbox_connector = NULL;
+ struct drm_display_mode *mode = NULL;
+ struct vbox_private *vbox = NULL;
+ unsigned int num_modes = 0;
+ int preferred_width, preferred_height;
+
+ vbox_connector = to_vbox_connector(connector);
+ vbox = connector->dev->dev_private;
+ /*
+ * Heuristic: we do not want to tell the host that we support dynamic
+ * resizing unless we feel confident that the user space client using
+ * the video driver can handle hot-plug events. So the first time modes
+ * are queried after a "master" switch we tell the host that we do not,
+ * and immediately after we send the client a hot-plug notification as
+ * a test to see if they will respond and query again.
+ * That is also the reason why capabilities are reported to the host at
+ * this place in the code rather than elsewhere.
+ * We need to report the flags location before reporting the IRQ
+ * capability.
+ */
+ hgsmi_report_flags_location(vbox->guest_pool, GUEST_HEAP_OFFSET(vbox) +
+ HOST_FLAGS_OFFSET);
+ if (vbox_connector->vbox_crtc->crtc_id == 0)
+ vbox_report_caps(vbox);
+ if (!vbox->initial_mode_queried) {
+ if (vbox_connector->vbox_crtc->crtc_id == 0) {
+ vbox->initial_mode_queried = true;
+ vbox_report_hotplug(vbox);
+ }
+ return drm_add_modes_noedid(connector, 800, 600);
+ }
+ num_modes = drm_add_modes_noedid(connector, 2560, 1600);
+ preferred_width = vbox_connector->mode_hint.width ?
+ vbox_connector->mode_hint.width : 1024;
+ preferred_height = vbox_connector->mode_hint.height ?
+ vbox_connector->mode_hint.height : 768;
+ mode = drm_cvt_mode(connector->dev, preferred_width, preferred_height,
+ 60, false, false, false);
+ if (mode) {
+ mode->type |= DRM_MODE_TYPE_PREFERRED;
+ drm_mode_probed_add(connector, mode);
+ ++num_modes;
+ }
+ vbox_set_edid(connector, preferred_width, preferred_height);
+ drm_object_property_set_value(
+ &connector->base, vbox->dev->mode_config.suggested_x_property,
+ vbox_connector->vbox_crtc->x_hint);
+ drm_object_property_set_value(
+ &connector->base, vbox->dev->mode_config.suggested_y_property,
+ vbox_connector->vbox_crtc->y_hint);
+
+ return num_modes;
+}
+
+static int vbox_mode_valid(struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ return MODE_OK;
+}
+
+static void vbox_connector_destroy(struct drm_connector *connector)
+{
+ struct vbox_connector *vbox_connector;
+
+ vbox_connector = to_vbox_connector(connector);
+ drm_connector_unregister(connector);
+ drm_connector_cleanup(connector);
+ kfree(connector);
+}
+
+static enum drm_connector_status
+vbox_connector_detect(struct drm_connector *connector, bool force)
+{
+ struct vbox_connector *vbox_connector;
+
+ vbox_connector = to_vbox_connector(connector);
+
+ return vbox_connector->mode_hint.disconnected ?
+ connector_status_disconnected : connector_status_connected;
+}
+
+static int vbox_fill_modes(struct drm_connector *connector, u32 max_x,
+ u32 max_y)
+{
+ struct vbox_connector *vbox_connector;
+ struct drm_device *dev;
+ struct drm_display_mode *mode, *iterator;
+
+ vbox_connector = to_vbox_connector(connector);
+ dev = vbox_connector->base.dev;
+ list_for_each_entry_safe(mode, iterator, &connector->modes, head) {
+ list_del(&mode->head);
+ drm_mode_destroy(dev, mode);
+ }
+
+ return drm_helper_probe_single_connector_modes(connector, max_x, max_y);
+}
+
+static const struct drm_connector_helper_funcs vbox_connector_helper_funcs = {
+ .mode_valid = vbox_mode_valid,
+ .get_modes = vbox_get_modes,
+ .best_encoder = vbox_best_single_encoder,
+};
+
+static const struct drm_connector_funcs vbox_connector_funcs = {
+ .dpms = drm_helper_connector_dpms,
+ .detect = vbox_connector_detect,
+ .fill_modes = vbox_fill_modes,
+ .destroy = vbox_connector_destroy,
+};
+
+static int vbox_connector_init(struct drm_device *dev,
+ struct vbox_crtc *vbox_crtc,
+ struct drm_encoder *encoder)
+{
+ struct vbox_connector *vbox_connector;
+ struct drm_connector *connector;
+
+ vbox_connector = kzalloc(sizeof(*vbox_connector), GFP_KERNEL);
+ if (!vbox_connector)
+ return -ENOMEM;
+
+ connector = &vbox_connector->base;
+ vbox_connector->vbox_crtc = vbox_crtc;
+
+ drm_connector_init(dev, connector, &vbox_connector_funcs,
+ DRM_MODE_CONNECTOR_VGA);
+ drm_connector_helper_add(connector, &vbox_connector_helper_funcs);
+
+ connector->interlace_allowed = 0;
+ connector->doublescan_allowed = 0;
+
+ drm_mode_create_suggested_offset_properties(dev);
+ drm_object_attach_property(&connector->base,
+ dev->mode_config.suggested_x_property, -1);
+ drm_object_attach_property(&connector->base,
+ dev->mode_config.suggested_y_property, -1);
+ drm_connector_register(connector);
+
+ drm_mode_connector_attach_encoder(connector, encoder);
+
+ return 0;
+}
+
+int vbox_mode_init(struct drm_device *dev)
+{
+ struct vbox_private *vbox = dev->dev_private;
+ struct drm_encoder *encoder;
+ struct vbox_crtc *vbox_crtc;
+ unsigned int i;
+ int ret;
+
+ /* vbox_cursor_init(dev); */
+ for (i = 0; i < vbox->num_crtcs; ++i) {
+ vbox_crtc = vbox_crtc_init(dev, i);
+ if (!vbox_crtc)
+ return -ENOMEM;
+ encoder = vbox_encoder_init(dev, i);
+ if (!encoder)
+ return -ENOMEM;
+ ret = vbox_connector_init(dev, vbox_crtc, encoder);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+void vbox_mode_fini(struct drm_device *dev)
+{
+ /* vbox_cursor_fini(dev); */
+}
+
+/**
+ * Copy the ARGB image and generate the mask, which is needed in case the host
+ * does not support ARGB cursors. The mask is a 1BPP bitmap with the bit set
+ * if the corresponding alpha value in the ARGB image is greater than 0xF0.
+ */
+static void copy_cursor_image(u8 *src, u8 *dst, u32 width, u32 height,
+ size_t mask_size)
+{
+ size_t line_size = (width + 7) / 8;
+ u32 i, j;
+
+ memcpy(dst + mask_size, src, width * height * 4);
+ for (i = 0; i < height; ++i)
+ for (j = 0; j < width; ++j)
+ if (((u32 *)src)[i * width + j] > 0xf0000000)
+ dst[i * line_size + j / 8] |= (0x80 >> (j % 8));
+}
+
+static int vbox_cursor_set2(struct drm_crtc *crtc, struct drm_file *file_priv,
+ u32 handle, u32 width, u32 height,
+ s32 hot_x, s32 hot_y)
+{
+ struct vbox_private *vbox = crtc->dev->dev_private;
+ struct vbox_crtc *vbox_crtc = to_vbox_crtc(crtc);
+ struct ttm_bo_kmap_obj uobj_map;
+ size_t data_size, mask_size;
+ struct drm_gem_object *obj;
+ u32 flags, caps = 0;
+ struct vbox_bo *bo;
+ bool src_isiomem;
+ u8 *dst = NULL;
+ u8 *src;
+ int ret;
+
+ /*
+ * Re-set this regularly as in 5.0.20 and earlier the information was
+ * lost on save and restore.
+ */
+ hgsmi_update_input_mapping(vbox->guest_pool, 0, 0,
+ vbox->input_mapping_width,
+ vbox->input_mapping_height);
+ if (!handle) {
+ bool cursor_enabled = false;
+ struct drm_crtc *crtci;
+
+ /* Hide cursor. */
+ vbox_crtc->cursor_enabled = false;
+ list_for_each_entry(crtci, &vbox->dev->mode_config.crtc_list,
+ head) {
+ if (to_vbox_crtc(crtci)->cursor_enabled)
+ cursor_enabled = true;
+ }
+
+ if (!cursor_enabled)
+ hgsmi_update_pointer_shape(vbox->guest_pool, 0, 0, 0,
+ 0, 0, NULL, 0);
+ return 0;
+ }
+
+ vbox_crtc->cursor_enabled = true;
+
+ if (width > VBOX_MAX_CURSOR_WIDTH || height > VBOX_MAX_CURSOR_HEIGHT ||
+ width == 0 || height == 0)
+ return -EINVAL;
+
+ ret = hgsmi_query_conf(vbox->guest_pool,
+ VBOX_VBVA_CONF32_CURSOR_CAPABILITIES, &caps);
+ if (ret)
+ return ret;
+
+ if (!(caps & VBOX_VBVA_CURSOR_CAPABILITY_HARDWARE)) {
+ /*
+ * -EINVAL means cursor_set2() not supported, -EAGAIN means
+ * retry at once.
+ */
+ return -EBUSY;
+ }
+
+ obj = drm_gem_object_lookup(file_priv, handle);
+ if (!obj) {
+ DRM_ERROR("Cannot find cursor object %x for crtc\n", handle);
+ return -ENOENT;
+ }
+
+ bo = gem_to_vbox_bo(obj);
+ ret = vbox_bo_reserve(bo, false);
+ if (ret)
+ goto out_unref_obj;
+
+ /*
+ * The mask must be calculated based on the alpha
+ * channel, one bit per ARGB word, and must be 32-bit
+ * padded.
+ */
+ mask_size = ((width + 7) / 8 * height + 3) & ~3;
+ data_size = width * height * 4 + mask_size;
+ vbox->cursor_hot_x = min_t(u32, max(hot_x, 0), width);
+ vbox->cursor_hot_y = min_t(u32, max(hot_y, 0), height);
+ vbox->cursor_width = width;
+ vbox->cursor_height = height;
+ vbox->cursor_data_size = data_size;
+ dst = vbox->cursor_data;
+
+ ret = ttm_bo_kmap(&bo->bo, 0, bo->bo.num_pages, &uobj_map);
+ if (ret) {
+ vbox->cursor_data_size = 0;
+ goto out_unreserve_bo;
+ }
+
+ src = ttm_kmap_obj_virtual(&uobj_map, &src_isiomem);
+ if (src_isiomem) {
+ DRM_ERROR("src cursor bo not in main memory\n");
+ ret = -EIO;
+ goto out_unmap_bo;
+ }
+
+ copy_cursor_image(src, dst, width, height, mask_size);
+
+ flags = VBOX_MOUSE_POINTER_VISIBLE | VBOX_MOUSE_POINTER_SHAPE |
+ VBOX_MOUSE_POINTER_ALPHA;
+ ret = hgsmi_update_pointer_shape(vbox->guest_pool, flags,
+ vbox->cursor_hot_x, vbox->cursor_hot_y,
+ width, height, dst, data_size);
+out_unmap_bo:
+ ttm_bo_kunmap(&uobj_map);
+out_unreserve_bo:
+ vbox_bo_unreserve(bo);
+out_unref_obj:
+ drm_gem_object_unreference_unlocked(obj);
+
+ return ret;
+}
+
+static int vbox_cursor_move(struct drm_crtc *crtc, int x, int y)
+{
+ struct vbox_private *vbox = crtc->dev->dev_private;
+ u32 flags = VBOX_MOUSE_POINTER_VISIBLE |
+ VBOX_MOUSE_POINTER_SHAPE | VBOX_MOUSE_POINTER_ALPHA;
+ s32 crtc_x =
+ vbox->single_framebuffer ? crtc->x : to_vbox_crtc(crtc)->x_hint;
+ s32 crtc_y =
+ vbox->single_framebuffer ? crtc->y : to_vbox_crtc(crtc)->y_hint;
+ u32 host_x, host_y;
+ u32 hot_x = 0;
+ u32 hot_y = 0;
+ int ret;
+
+ /*
+ * We compare these to unsigned later and don't
+ * need to handle negative.
+ */
+ if (x + crtc_x < 0 || y + crtc_y < 0 || vbox->cursor_data_size == 0)
+ return 0;
+
+ ret = hgsmi_cursor_position(vbox->guest_pool, true, x + crtc_x,
+ y + crtc_y, &host_x, &host_y);
+
+ /*
+ * The only reason we have vbox_cursor_move() is that some older clients
+ * might use DRM_IOCTL_MODE_CURSOR instead of DRM_IOCTL_MODE_CURSOR2 and
+ * use DRM_MODE_CURSOR_MOVE to set the hot-spot.
+ *
+ * However VirtualBox 5.0.20 and earlier has a bug causing it to return
+ * 0,0 as host cursor location after a save and restore.
+ *
+ * To work around this we ignore a 0, 0 return, since missing the odd
+ * time when it legitimately happens is not going to hurt much.
+ */
+ if (ret || (host_x == 0 && host_y == 0))
+ return ret;
+
+ if (x + crtc_x < host_x)
+ hot_x = min(host_x - x - crtc_x, vbox->cursor_width);
+ if (y + crtc_y < host_y)
+ hot_y = min(host_y - y - crtc_y, vbox->cursor_height);
+
+ if (hot_x == vbox->cursor_hot_x && hot_y == vbox->cursor_hot_y)
+ return 0;
+
+ vbox->cursor_hot_x = hot_x;
+ vbox->cursor_hot_y = hot_y;
+
+ return hgsmi_update_pointer_shape(vbox->guest_pool, flags,
+ hot_x, hot_y, vbox->cursor_width, vbox->cursor_height,
+ vbox->cursor_data, vbox->cursor_data_size);
+}
diff --git a/drivers/staging/vboxvideo/vbox_prime.c b/drivers/staging/vboxvideo/vbox_prime.c
new file mode 100644
index 0000000..b7453e4
--- /dev/null
+++ b/drivers/staging/vboxvideo/vbox_prime.c
@@ -0,0 +1,74 @@
+/*
+ * Copyright (C) 2017 Oracle Corporation
+ * Copyright 2017 Canonical
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Andreas Pokorny
+ */
+
+#include "vbox_drv.h"
+
+/*
+ * Based on qxl_prime.c:
+ * Empty Implementations as there should not be any other driver for a virtual
+ * device that might share buffers with vboxvideo
+ */
+
+int vbox_gem_prime_pin(struct drm_gem_object *obj)
+{
+ WARN_ONCE(1, "not implemented");
+ return -ENOSYS;
+}
+
+void vbox_gem_prime_unpin(struct drm_gem_object *obj)
+{
+ WARN_ONCE(1, "not implemented");
+}
+
+struct sg_table *vbox_gem_prime_get_sg_table(struct drm_gem_object *obj)
+{
+ WARN_ONCE(1, "not implemented");
+ return ERR_PTR(-ENOSYS);
+}
+
+struct drm_gem_object *vbox_gem_prime_import_sg_table(
+ struct drm_device *dev, struct dma_buf_attachment *attach,
+ struct sg_table *table)
+{
+ WARN_ONCE(1, "not implemented");
+ return ERR_PTR(-ENOSYS);
+}
+
+void *vbox_gem_prime_vmap(struct drm_gem_object *obj)
+{
+ WARN_ONCE(1, "not implemented");
+ return ERR_PTR(-ENOSYS);
+}
+
+void vbox_gem_prime_vunmap(struct drm_gem_object *obj, void *vaddr)
+{
+ WARN_ONCE(1, "not implemented");
+}
+
+int vbox_gem_prime_mmap(struct drm_gem_object *obj, struct vm_area_struct *area)
+{
+ WARN_ONCE(1, "not implemented");
+ return -ENOSYS;
+}
diff --git a/drivers/staging/vboxvideo/vbox_ttm.c b/drivers/staging/vboxvideo/vbox_ttm.c
new file mode 100644
index 0000000..34a905d
--- /dev/null
+++ b/drivers/staging/vboxvideo/vbox_ttm.c
@@ -0,0 +1,472 @@
+/*
+ * Copyright (C) 2013-2017 Oracle Corporation
+ * This file is based on ast_ttm.c
+ * Copyright 2012 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ *
+ * Authors: Dave Airlie <airlied@redhat.com>
+ * Michael Thayer <michael.thayer@oracle.com>
+ */
+#include "vbox_drv.h"
+#include <ttm/ttm_page_alloc.h>
+
+static inline struct vbox_private *vbox_bdev(struct ttm_bo_device *bd)
+{
+ return container_of(bd, struct vbox_private, ttm.bdev);
+}
+
+static int vbox_ttm_mem_global_init(struct drm_global_reference *ref)
+{
+ return ttm_mem_global_init(ref->object);
+}
+
+static void vbox_ttm_mem_global_release(struct drm_global_reference *ref)
+{
+ ttm_mem_global_release(ref->object);
+}
+
+/**
+ * Adds the vbox memory manager object/structures to the global memory manager.
+ */
+static int vbox_ttm_global_init(struct vbox_private *vbox)
+{
+ struct drm_global_reference *global_ref;
+ int ret;
+
+ global_ref = &vbox->ttm.mem_global_ref;
+ global_ref->global_type = DRM_GLOBAL_TTM_MEM;
+ global_ref->size = sizeof(struct ttm_mem_global);
+ global_ref->init = &vbox_ttm_mem_global_init;
+ global_ref->release = &vbox_ttm_mem_global_release;
+ ret = drm_global_item_ref(global_ref);
+ if (ret) {
+ DRM_ERROR("Failed setting up TTM memory subsystem.\n");
+ return ret;
+ }
+
+ vbox->ttm.bo_global_ref.mem_glob = vbox->ttm.mem_global_ref.object;
+ global_ref = &vbox->ttm.bo_global_ref.ref;
+ global_ref->global_type = DRM_GLOBAL_TTM_BO;
+ global_ref->size = sizeof(struct ttm_bo_global);
+ global_ref->init = &ttm_bo_global_init;
+ global_ref->release = &ttm_bo_global_release;
+
+ ret = drm_global_item_ref(global_ref);
+ if (ret) {
+ DRM_ERROR("Failed setting up TTM BO subsystem.\n");
+ drm_global_item_unref(&vbox->ttm.mem_global_ref);
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * Removes the vbox memory manager object from the global memory manager.
+ */
+static void vbox_ttm_global_release(struct vbox_private *vbox)
+{
+ drm_global_item_unref(&vbox->ttm.bo_global_ref.ref);
+ drm_global_item_unref(&vbox->ttm.mem_global_ref);
+}
+
+static void vbox_bo_ttm_destroy(struct ttm_buffer_object *tbo)
+{
+ struct vbox_bo *bo;
+
+ bo = container_of(tbo, struct vbox_bo, bo);
+
+ drm_gem_object_release(&bo->gem);
+ kfree(bo);
+}
+
+static bool vbox_ttm_bo_is_vbox_bo(struct ttm_buffer_object *bo)
+{
+ if (bo->destroy == &vbox_bo_ttm_destroy)
+ return true;
+
+ return false;
+}
+
+static int
+vbox_bo_init_mem_type(struct ttm_bo_device *bdev, u32 type,
+ struct ttm_mem_type_manager *man)
+{
+ switch (type) {
+ case TTM_PL_SYSTEM:
+ man->flags = TTM_MEMTYPE_FLAG_MAPPABLE;
+ man->available_caching = TTM_PL_MASK_CACHING;
+ man->default_caching = TTM_PL_FLAG_CACHED;
+ break;
+ case TTM_PL_VRAM:
+ man->func = &ttm_bo_manager_func;
+ man->flags = TTM_MEMTYPE_FLAG_FIXED | TTM_MEMTYPE_FLAG_MAPPABLE;
+ man->available_caching = TTM_PL_FLAG_UNCACHED | TTM_PL_FLAG_WC;
+ man->default_caching = TTM_PL_FLAG_WC;
+ break;
+ default:
+ DRM_ERROR("Unsupported memory type %u\n", (unsigned int)type);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void
+vbox_bo_evict_flags(struct ttm_buffer_object *bo, struct ttm_placement *pl)
+{
+ struct vbox_bo *vboxbo = vbox_bo(bo);
+
+ if (!vbox_ttm_bo_is_vbox_bo(bo))
+ return;
+
+ vbox_ttm_placement(vboxbo, TTM_PL_FLAG_SYSTEM);
+ *pl = vboxbo->placement;
+}
+
+static int vbox_bo_verify_access(struct ttm_buffer_object *bo,
+ struct file *filp)
+{
+ return 0;
+}
+
+static int vbox_ttm_io_mem_reserve(struct ttm_bo_device *bdev,
+ struct ttm_mem_reg *mem)
+{
+ struct ttm_mem_type_manager *man = &bdev->man[mem->mem_type];
+ struct vbox_private *vbox = vbox_bdev(bdev);
+
+ mem->bus.addr = NULL;
+ mem->bus.offset = 0;
+ mem->bus.size = mem->num_pages << PAGE_SHIFT;
+ mem->bus.base = 0;
+ mem->bus.is_iomem = false;
+ if (!(man->flags & TTM_MEMTYPE_FLAG_MAPPABLE))
+ return -EINVAL;
+ switch (mem->mem_type) {
+ case TTM_PL_SYSTEM:
+ /* system memory */
+ return 0;
+ case TTM_PL_VRAM:
+ mem->bus.offset = mem->start << PAGE_SHIFT;
+ mem->bus.base = pci_resource_start(vbox->dev->pdev, 0);
+ mem->bus.is_iomem = true;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static void vbox_ttm_io_mem_free(struct ttm_bo_device *bdev,
+ struct ttm_mem_reg *mem)
+{
+}
+
+static int vbox_bo_move(struct ttm_buffer_object *bo,
+ bool evict, bool interruptible,
+ bool no_wait_gpu, struct ttm_mem_reg *new_mem)
+{
+ return ttm_bo_move_memcpy(bo, interruptible, no_wait_gpu, new_mem);
+}
+
+static void vbox_ttm_backend_destroy(struct ttm_tt *tt)
+{
+ ttm_tt_fini(tt);
+ kfree(tt);
+}
+
+static struct ttm_backend_func vbox_tt_backend_func = {
+ .destroy = &vbox_ttm_backend_destroy,
+};
+
+static struct ttm_tt *vbox_ttm_tt_create(struct ttm_bo_device *bdev,
+ unsigned long size,
+ u32 page_flags,
+ struct page *dummy_read_page)
+{
+ struct ttm_tt *tt;
+
+ tt = kzalloc(sizeof(*tt), GFP_KERNEL);
+ if (!tt)
+ return NULL;
+
+ tt->func = &vbox_tt_backend_func;
+ if (ttm_tt_init(tt, bdev, size, page_flags, dummy_read_page)) {
+ kfree(tt);
+ return NULL;
+ }
+
+ return tt;
+}
+
+static int vbox_ttm_tt_populate(struct ttm_tt *ttm)
+{
+ return ttm_pool_populate(ttm);
+}
+
+static void vbox_ttm_tt_unpopulate(struct ttm_tt *ttm)
+{
+ ttm_pool_unpopulate(ttm);
+}
+
+struct ttm_bo_driver vbox_bo_driver = {
+ .ttm_tt_create = vbox_ttm_tt_create,
+ .ttm_tt_populate = vbox_ttm_tt_populate,
+ .ttm_tt_unpopulate = vbox_ttm_tt_unpopulate,
+ .init_mem_type = vbox_bo_init_mem_type,
+ .eviction_valuable = ttm_bo_eviction_valuable,
+ .evict_flags = vbox_bo_evict_flags,
+ .move = vbox_bo_move,
+ .verify_access = vbox_bo_verify_access,
+ .io_mem_reserve = &vbox_ttm_io_mem_reserve,
+ .io_mem_free = &vbox_ttm_io_mem_free,
+ .io_mem_pfn = ttm_bo_default_io_mem_pfn,
+};
+
+int vbox_mm_init(struct vbox_private *vbox)
+{
+ int ret;
+ struct drm_device *dev = vbox->dev;
+ struct ttm_bo_device *bdev = &vbox->ttm.bdev;
+
+ ret = vbox_ttm_global_init(vbox);
+ if (ret)
+ return ret;
+
+ ret = ttm_bo_device_init(&vbox->ttm.bdev,
+ vbox->ttm.bo_global_ref.ref.object,
+ &vbox_bo_driver,
+ dev->anon_inode->i_mapping,
+ DRM_FILE_PAGE_OFFSET, true);
+ if (ret) {
+ DRM_ERROR("Error initialising bo driver; %d\n", ret);
+ goto err_ttm_global_release;
+ }
+
+ ret = ttm_bo_init_mm(bdev, TTM_PL_VRAM,
+ vbox->available_vram_size >> PAGE_SHIFT);
+ if (ret) {
+ DRM_ERROR("Failed ttm VRAM init: %d\n", ret);
+ goto err_device_release;
+ }
+
+#ifdef DRM_MTRR_WC
+ vbox->fb_mtrr = drm_mtrr_add(pci_resource_start(dev->pdev, 0),
+ pci_resource_len(dev->pdev, 0),
+ DRM_MTRR_WC);
+#else
+ vbox->fb_mtrr = arch_phys_wc_add(pci_resource_start(dev->pdev, 0),
+ pci_resource_len(dev->pdev, 0));
+#endif
+ return 0;
+
+err_device_release:
+ ttm_bo_device_release(&vbox->ttm.bdev);
+err_ttm_global_release:
+ vbox_ttm_global_release(vbox);
+ return ret;
+}
+
+void vbox_mm_fini(struct vbox_private *vbox)
+{
+#ifdef DRM_MTRR_WC
+ drm_mtrr_del(vbox->fb_mtrr,
+ pci_resource_start(vbox->dev->pdev, 0),
+ pci_resource_len(vbox->dev->pdev, 0), DRM_MTRR_WC);
+#else
+ arch_phys_wc_del(vbox->fb_mtrr);
+#endif
+ ttm_bo_device_release(&vbox->ttm.bdev);
+ vbox_ttm_global_release(vbox);
+}
+
+void vbox_ttm_placement(struct vbox_bo *bo, int domain)
+{
+ unsigned int i;
+ u32 c = 0;
+
+ bo->placement.placement = bo->placements;
+ bo->placement.busy_placement = bo->placements;
+
+ if (domain & TTM_PL_FLAG_VRAM)
+ bo->placements[c++].flags =
+ TTM_PL_FLAG_WC | TTM_PL_FLAG_UNCACHED | TTM_PL_FLAG_VRAM;
+ if (domain & TTM_PL_FLAG_SYSTEM)
+ bo->placements[c++].flags =
+ TTM_PL_MASK_CACHING | TTM_PL_FLAG_SYSTEM;
+ if (!c)
+ bo->placements[c++].flags =
+ TTM_PL_MASK_CACHING | TTM_PL_FLAG_SYSTEM;
+
+ bo->placement.num_placement = c;
+ bo->placement.num_busy_placement = c;
+
+ for (i = 0; i < c; ++i) {
+ bo->placements[i].fpfn = 0;
+ bo->placements[i].lpfn = 0;
+ }
+}
+
+int vbox_bo_create(struct drm_device *dev, int size, int align,
+ u32 flags, struct vbox_bo **pvboxbo)
+{
+ struct vbox_private *vbox = dev->dev_private;
+ struct vbox_bo *vboxbo;
+ size_t acc_size;
+ int ret;
+
+ vboxbo = kzalloc(sizeof(*vboxbo), GFP_KERNEL);
+ if (!vboxbo)
+ return -ENOMEM;
+
+ ret = drm_gem_object_init(dev, &vboxbo->gem, size);
+ if (ret)
+ goto err_free_vboxbo;
+
+ vboxbo->bo.bdev = &vbox->ttm.bdev;
+
+ vbox_ttm_placement(vboxbo, TTM_PL_FLAG_VRAM | TTM_PL_FLAG_SYSTEM);
+
+ acc_size = ttm_bo_dma_acc_size(&vbox->ttm.bdev, size,
+ sizeof(struct vbox_bo));
+
+ ret = ttm_bo_init(&vbox->ttm.bdev, &vboxbo->bo, size,
+ ttm_bo_type_device, &vboxbo->placement,
+ align >> PAGE_SHIFT, false, NULL, acc_size,
+ NULL, NULL, vbox_bo_ttm_destroy);
+ if (ret)
+ goto err_free_vboxbo;
+
+ *pvboxbo = vboxbo;
+
+ return 0;
+
+err_free_vboxbo:
+ kfree(vboxbo);
+ return ret;
+}
+
+static inline u64 vbox_bo_gpu_offset(struct vbox_bo *bo)
+{
+ return bo->bo.offset;
+}
+
+int vbox_bo_pin(struct vbox_bo *bo, u32 pl_flag, u64 *gpu_addr)
+{
+ int i, ret;
+
+ if (bo->pin_count) {
+ bo->pin_count++;
+ if (gpu_addr)
+ *gpu_addr = vbox_bo_gpu_offset(bo);
+
+ return 0;
+ }
+
+ vbox_ttm_placement(bo, pl_flag);
+
+ for (i = 0; i < bo->placement.num_placement; i++)
+ bo->placements[i].flags |= TTM_PL_FLAG_NO_EVICT;
+
+ ret = ttm_bo_validate(&bo->bo, &bo->placement, false, false);
+ if (ret)
+ return ret;
+
+ bo->pin_count = 1;
+
+ if (gpu_addr)
+ *gpu_addr = vbox_bo_gpu_offset(bo);
+
+ return 0;
+}
+
+int vbox_bo_unpin(struct vbox_bo *bo)
+{
+ int i, ret;
+
+ if (!bo->pin_count) {
+ DRM_ERROR("unpin bad %p\n", bo);
+ return 0;
+ }
+ bo->pin_count--;
+ if (bo->pin_count)
+ return 0;
+
+ for (i = 0; i < bo->placement.num_placement; i++)
+ bo->placements[i].flags &= ~TTM_PL_FLAG_NO_EVICT;
+
+ ret = ttm_bo_validate(&bo->bo, &bo->placement, false, false);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+/*
+ * Move a vbox-owned buffer object to system memory if no one else has it
+ * pinned. The caller must have pinned it previously, and this call will
+ * release the caller's pin.
+ */
+int vbox_bo_push_sysram(struct vbox_bo *bo)
+{
+ int i, ret;
+
+ if (!bo->pin_count) {
+ DRM_ERROR("unpin bad %p\n", bo);
+ return 0;
+ }
+ bo->pin_count--;
+ if (bo->pin_count)
+ return 0;
+
+ if (bo->kmap.virtual)
+ ttm_bo_kunmap(&bo->kmap);
+
+ vbox_ttm_placement(bo, TTM_PL_FLAG_SYSTEM);
+
+ for (i = 0; i < bo->placement.num_placement; i++)
+ bo->placements[i].flags |= TTM_PL_FLAG_NO_EVICT;
+
+ ret = ttm_bo_validate(&bo->bo, &bo->placement, false, false);
+ if (ret) {
+ DRM_ERROR("pushing to VRAM failed\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+int vbox_mmap(struct file *filp, struct vm_area_struct *vma)
+{
+ struct drm_file *file_priv;
+ struct vbox_private *vbox;
+
+ if (unlikely(vma->vm_pgoff < DRM_FILE_PAGE_OFFSET))
+ return -EINVAL;
+
+ file_priv = filp->private_data;
+ vbox = file_priv->minor->dev->dev_private;
+
+ return ttm_bo_mmap(filp, vma, &vbox->ttm.bdev);
+}
diff --git a/drivers/staging/vboxvideo/vboxvideo.h b/drivers/staging/vboxvideo/vboxvideo.h
new file mode 100644
index 0000000..d835d75
--- /dev/null
+++ b/drivers/staging/vboxvideo/vboxvideo.h
@@ -0,0 +1,491 @@
+/*
+ * Copyright (C) 2006-2016 Oracle Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ */
+
+#ifndef __VBOXVIDEO_H__
+#define __VBOXVIDEO_H__
+
+/*
+ * This should be in sync with monitorCount <xsd:maxInclusive value="64"/> in
+ * src/VBox/Main/xml/VirtualBox-settings-common.xsd
+ */
+#define VBOX_VIDEO_MAX_SCREENS 64
+
+/*
+ * The last 4096 bytes of the guest VRAM contains the generic info for all
+ * DualView chunks: sizes and offsets of chunks. This is filled by miniport.
+ *
+ * Last 4096 bytes of each chunk contain chunk specific data: framebuffer info,
+ * etc. This is used exclusively by the corresponding instance of a display
+ * driver.
+ *
+ * The VRAM layout:
+ * Last 4096 bytes - Adapter information area.
+ * 4096 bytes aligned miniport heap (value specified in the config rouded up).
+ * Slack - what left after dividing the VRAM.
+ * 4096 bytes aligned framebuffers:
+ * last 4096 bytes of each framebuffer is the display information area.
+ *
+ * The Virtual Graphics Adapter information in the guest VRAM is stored by the
+ * guest video driver using structures prepended by VBOXVIDEOINFOHDR.
+ *
+ * When the guest driver writes dword 0 to the VBE_DISPI_INDEX_VBOX_VIDEO
+ * the host starts to process the info. The first element at the start of
+ * the 4096 bytes region should be normally be a LINK that points to
+ * actual information chain. That way the guest driver can have some
+ * fixed layout of the information memory block and just rewrite
+ * the link to point to relevant memory chain.
+ *
+ * The processing stops at the END element.
+ *
+ * The host can access the memory only when the port IO is processed.
+ * All data that will be needed later must be copied from these 4096 bytes.
+ * But other VRAM can be used by host until the mode is disabled.
+ *
+ * The guest driver writes dword 0xffffffff to the VBE_DISPI_INDEX_VBOX_VIDEO
+ * to disable the mode.
+ *
+ * VBE_DISPI_INDEX_VBOX_VIDEO is used to read the configuration information
+ * from the host and issue commands to the host.
+ *
+ * The guest writes the VBE_DISPI_INDEX_VBOX_VIDEO index register, the the
+ * following operations with the VBE data register can be performed:
+ *
+ * Operation Result
+ * write 16 bit value NOP
+ * read 16 bit value count of monitors
+ * write 32 bit value set the vbox cmd value and the cmd processed by the host
+ * read 32 bit value result of the last vbox command is returned
+ */
+
+/**
+ * VBVA command header.
+ *
+ * @todo Where does this fit in?
+ */
+struct vbva_cmd_hdr {
+ /** Coordinates of affected rectangle. */
+ s16 x;
+ s16 y;
+ u16 w;
+ u16 h;
+} __packed;
+
+/** @name VBVA ring defines.
+ *
+ * The VBVA ring buffer is suitable for transferring large (< 2GB) amount of
+ * data. For example big bitmaps which do not fit to the buffer.
+ *
+ * Guest starts writing to the buffer by initializing a record entry in the
+ * records queue. VBVA_F_RECORD_PARTIAL indicates that the record is being
+ * written. As data is written to the ring buffer, the guest increases
+ * free_offset.
+ *
+ * The host reads the records on flushes and processes all completed records.
+ * When host encounters situation when only a partial record presents and
+ * len_and_flags & ~VBVA_F_RECORD_PARTIAL >= VBVA_RING_BUFFER_SIZE -
+ * VBVA_RING_BUFFER_THRESHOLD, the host fetched all record data and updates
+ * data_offset. After that on each flush the host continues fetching the data
+ * until the record is completed.
+ *
+ */
+#define VBVA_RING_BUFFER_SIZE (4194304 - 1024)
+#define VBVA_RING_BUFFER_THRESHOLD (4096)
+
+#define VBVA_MAX_RECORDS (64)
+
+#define VBVA_F_MODE_ENABLED 0x00000001u
+#define VBVA_F_MODE_VRDP 0x00000002u
+#define VBVA_F_MODE_VRDP_RESET 0x00000004u
+#define VBVA_F_MODE_VRDP_ORDER_MASK 0x00000008u
+
+#define VBVA_F_STATE_PROCESSING 0x00010000u
+
+#define VBVA_F_RECORD_PARTIAL 0x80000000u
+
+/**
+ * VBVA record.
+ */
+struct vbva_record {
+ /** The length of the record. Changed by guest. */
+ u32 len_and_flags;
+} __packed;
+
+/*
+ * The minimum HGSMI heap size is PAGE_SIZE (4096 bytes) and is a restriction of
+ * the runtime heapsimple API. Use minimum 2 pages here, because the info area
+ * also may contain other data (for example hgsmi_host_flags structure).
+ */
+#define VBVA_ADAPTER_INFORMATION_SIZE 65536
+#define VBVA_MIN_BUFFER_SIZE 65536
+
+/* The value for port IO to let the adapter to interpret the adapter memory. */
+#define VBOX_VIDEO_DISABLE_ADAPTER_MEMORY 0xFFFFFFFF
+
+/* The value for port IO to let the adapter to interpret the adapter memory. */
+#define VBOX_VIDEO_INTERPRET_ADAPTER_MEMORY 0x00000000
+
+/* The value for port IO to let the adapter to interpret the display memory.
+ * The display number is encoded in low 16 bits.
+ */
+#define VBOX_VIDEO_INTERPRET_DISPLAY_MEMORY_BASE 0x00010000
+
+struct vbva_host_flags {
+ u32 host_events;
+ u32 supported_orders;
+} __packed;
+
+struct vbva_buffer {
+ struct vbva_host_flags host_flags;
+
+ /* The offset where the data start in the buffer. */
+ u32 data_offset;
+ /* The offset where next data must be placed in the buffer. */
+ u32 free_offset;
+
+ /* The queue of record descriptions. */
+ struct vbva_record records[VBVA_MAX_RECORDS];
+ u32 record_first_index;
+ u32 record_free_index;
+
+ /* Space to leave free when large partial records are transferred. */
+ u32 partial_write_tresh;
+
+ u32 data_len;
+ /* variable size for the rest of the vbva_buffer area in VRAM. */
+ u8 data[0];
+} __packed;
+
+#define VBVA_MAX_RECORD_SIZE (128 * 1024 * 1024)
+
+/* guest->host commands */
+#define VBVA_QUERY_CONF32 1
+#define VBVA_SET_CONF32 2
+#define VBVA_INFO_VIEW 3
+#define VBVA_INFO_HEAP 4
+#define VBVA_FLUSH 5
+#define VBVA_INFO_SCREEN 6
+#define VBVA_ENABLE 7
+#define VBVA_MOUSE_POINTER_SHAPE 8
+/* informs host about HGSMI caps. see vbva_caps below */
+#define VBVA_INFO_CAPS 12
+/* configures scanline, see VBVASCANLINECFG below */
+#define VBVA_SCANLINE_CFG 13
+/* requests scanline info, see VBVASCANLINEINFO below */
+#define VBVA_SCANLINE_INFO 14
+/* inform host about VBVA Command submission */
+#define VBVA_CMDVBVA_SUBMIT 16
+/* inform host about VBVA Command submission */
+#define VBVA_CMDVBVA_FLUSH 17
+/* G->H DMA command */
+#define VBVA_CMDVBVA_CTL 18
+/* Query most recent mode hints sent */
+#define VBVA_QUERY_MODE_HINTS 19
+/**
+ * Report the guest virtual desktop position and size for mapping host and
+ * guest pointer positions.
+ */
+#define VBVA_REPORT_INPUT_MAPPING 20
+/** Report the guest cursor position and query the host position. */
+#define VBVA_CURSOR_POSITION 21
+
+/* host->guest commands */
+#define VBVAHG_EVENT 1
+#define VBVAHG_DISPLAY_CUSTOM 2
+
+/* vbva_conf32::index */
+#define VBOX_VBVA_CONF32_MONITOR_COUNT 0
+#define VBOX_VBVA_CONF32_HOST_HEAP_SIZE 1
+/**
+ * Returns VINF_SUCCESS if the host can report mode hints via VBVA.
+ * Set value to VERR_NOT_SUPPORTED before calling.
+ */
+#define VBOX_VBVA_CONF32_MODE_HINT_REPORTING 2
+/**
+ * Returns VINF_SUCCESS if the host can report guest cursor enabled status via
+ * VBVA. Set value to VERR_NOT_SUPPORTED before calling.
+ */
+#define VBOX_VBVA_CONF32_GUEST_CURSOR_REPORTING 3
+/**
+ * Returns the currently available host cursor capabilities. Available if
+ * vbva_conf32::VBOX_VBVA_CONF32_GUEST_CURSOR_REPORTING returns success.
+ * @see VMMDevReqMouseStatus::mouseFeatures.
+ */
+#define VBOX_VBVA_CONF32_CURSOR_CAPABILITIES 4
+/** Returns the supported flags in vbva_infoscreen::flags. */
+#define VBOX_VBVA_CONF32_SCREEN_FLAGS 5
+/** Returns the max size of VBVA record. */
+#define VBOX_VBVA_CONF32_MAX_RECORD_SIZE 6
+
+struct vbva_conf32 {
+ u32 index;
+ u32 value;
+} __packed;
+
+/** Reserved for historical reasons. */
+#define VBOX_VBVA_CURSOR_CAPABILITY_RESERVED0 BIT(0)
+/**
+ * Guest cursor capability: can the host show a hardware cursor at the host
+ * pointer location?
+ */
+#define VBOX_VBVA_CURSOR_CAPABILITY_HARDWARE BIT(1)
+/** Reserved for historical reasons. */
+#define VBOX_VBVA_CURSOR_CAPABILITY_RESERVED2 BIT(2)
+/** Reserved for historical reasons. Must always be unset. */
+#define VBOX_VBVA_CURSOR_CAPABILITY_RESERVED3 BIT(3)
+/** Reserved for historical reasons. */
+#define VBOX_VBVA_CURSOR_CAPABILITY_RESERVED4 BIT(4)
+/** Reserved for historical reasons. */
+#define VBOX_VBVA_CURSOR_CAPABILITY_RESERVED5 BIT(5)
+
+struct vbva_infoview {
+ /* Index of the screen, assigned by the guest. */
+ u32 view_index;
+
+ /* The screen offset in VRAM, the framebuffer starts here. */
+ u32 view_offset;
+
+ /* The size of the VRAM memory that can be used for the view. */
+ u32 view_size;
+
+ /* The recommended maximum size of the VRAM memory for the screen. */
+ u32 max_screen_size;
+} __packed;
+
+struct vbva_flush {
+ u32 reserved;
+} __packed;
+
+/* vbva_infoscreen::flags */
+#define VBVA_SCREEN_F_NONE 0x0000
+#define VBVA_SCREEN_F_ACTIVE 0x0001
+/**
+ * The virtual monitor has been disabled by the guest and should be removed
+ * by the host and ignored for purposes of pointer position calculation.
+ */
+#define VBVA_SCREEN_F_DISABLED 0x0002
+/**
+ * The virtual monitor has been blanked by the guest and should be blacked
+ * out by the host using width, height, etc values from the vbva_infoscreen
+ * request.
+ */
+#define VBVA_SCREEN_F_BLANK 0x0004
+/**
+ * The virtual monitor has been blanked by the guest and should be blacked
+ * out by the host using the previous mode values for width. height, etc.
+ */
+#define VBVA_SCREEN_F_BLANK2 0x0008
+
+struct vbva_infoscreen {
+ /* Which view contains the screen. */
+ u32 view_index;
+
+ /* Physical X origin relative to the primary screen. */
+ s32 origin_x;
+
+ /* Physical Y origin relative to the primary screen. */
+ s32 origin_y;
+
+ /* Offset of visible framebuffer relative to the framebuffer start. */
+ u32 start_offset;
+
+ /* The scan line size in bytes. */
+ u32 line_size;
+
+ /* Width of the screen. */
+ u32 width;
+
+ /* Height of the screen. */
+ u32 height;
+
+ /* Color depth. */
+ u16 bits_per_pixel;
+
+ /* VBVA_SCREEN_F_* */
+ u16 flags;
+} __packed;
+
+/* vbva_enable::flags */
+#define VBVA_F_NONE 0x00000000
+#define VBVA_F_ENABLE 0x00000001
+#define VBVA_F_DISABLE 0x00000002
+/* extended VBVA to be used with WDDM */
+#define VBVA_F_EXTENDED 0x00000004
+/* vbva offset is absolute VRAM offset */
+#define VBVA_F_ABSOFFSET 0x00000008
+
+struct vbva_enable {
+ u32 flags;
+ u32 offset;
+ s32 result;
+} __packed;
+
+struct vbva_enable_ex {
+ struct vbva_enable base;
+ u32 screen_id;
+} __packed;
+
+struct vbva_mouse_pointer_shape {
+ /* The host result. */
+ s32 result;
+
+ /* VBOX_MOUSE_POINTER_* bit flags. */
+ u32 flags;
+
+ /* X coordinate of the hot spot. */
+ u32 hot_X;
+
+ /* Y coordinate of the hot spot. */
+ u32 hot_y;
+
+ /* Width of the pointer in pixels. */
+ u32 width;
+
+ /* Height of the pointer in scanlines. */
+ u32 height;
+
+ /* Pointer data.
+ *
+ ****
+ * The data consists of 1 bpp AND mask followed by 32 bpp XOR (color)
+ * mask.
+ *
+ * For pointers without alpha channel the XOR mask pixels are 32 bit
+ * values: (lsb)BGR0(msb). For pointers with alpha channel the XOR mask
+ * consists of (lsb)BGRA(msb) 32 bit values.
+ *
+ * Guest driver must create the AND mask for pointers with alpha chan.,
+ * so if host does not support alpha, the pointer could be displayed as
+ * a normal color pointer. The AND mask can be constructed from alpha
+ * values. For example alpha value >= 0xf0 means bit 0 in the AND mask.
+ *
+ * The AND mask is 1 bpp bitmap with byte aligned scanlines. Size of AND
+ * mask, therefore, is and_len = (width + 7) / 8 * height. The padding
+ * bits at the end of any scanline are undefined.
+ *
+ * The XOR mask follows the AND mask on the next 4 bytes aligned offset:
+ * u8 *xor = and + (and_len + 3) & ~3
+ * Bytes in the gap between the AND and the XOR mask are undefined.
+ * XOR mask scanlines have no gap between them and size of XOR mask is:
+ * xor_len = width * 4 * height.
+ ****
+ *
+ * Preallocate 4 bytes for accessing actual data as p->data.
+ */
+ u8 data[4];
+} __packed;
+
+/**
+ * @name vbva_mouse_pointer_shape::flags
+ * @note The VBOX_MOUSE_POINTER_* flags are used in the guest video driver,
+ * values must be <= 0x8000 and must not be changed. (try make more sense
+ * of this, please).
+ * @{
+ */
+
+/** pointer is visible */
+#define VBOX_MOUSE_POINTER_VISIBLE 0x0001
+/** pointer has alpha channel */
+#define VBOX_MOUSE_POINTER_ALPHA 0x0002
+/** pointerData contains new pointer shape */
+#define VBOX_MOUSE_POINTER_SHAPE 0x0004
+
+/** @} */
+
+/*
+ * The guest driver can handle asynch guest cmd completion by reading the
+ * command offset from io port.
+ */
+#define VBVACAPS_COMPLETEGCMD_BY_IOREAD 0x00000001
+/* the guest driver can handle video adapter IRQs */
+#define VBVACAPS_IRQ 0x00000002
+/** The guest can read video mode hints sent via VBVA. */
+#define VBVACAPS_VIDEO_MODE_HINTS 0x00000004
+/** The guest can switch to a software cursor on demand. */
+#define VBVACAPS_DISABLE_CURSOR_INTEGRATION 0x00000008
+/** The guest does not depend on host handling the VBE registers. */
+#define VBVACAPS_USE_VBVA_ONLY 0x00000010
+
+struct vbva_caps {
+ s32 rc;
+ u32 caps;
+} __packed;
+
+/** Query the most recent mode hints received from the host. */
+struct vbva_query_mode_hints {
+ /** The maximum number of screens to return hints for. */
+ u16 hints_queried_count;
+ /** The size of the mode hint structures directly following this one. */
+ u16 hint_structure_guest_size;
+ /** Return code for the operation. Initialise to VERR_NOT_SUPPORTED. */
+ s32 rc;
+} __packed;
+
+/**
+ * Structure in which a mode hint is returned. The guest allocates an array
+ * of these immediately after the vbva_query_mode_hints structure.
+ * To accommodate future extensions, the vbva_query_mode_hints structure
+ * specifies the size of the vbva_modehint structures allocated by the guest,
+ * and the host only fills out structure elements which fit into that size. The
+ * host should fill any unused members (e.g. dx, dy) or structure space on the
+ * end with ~0. The whole structure can legally be set to ~0 to skip a screen.
+ */
+struct vbva_modehint {
+ u32 magic;
+ u32 cx;
+ u32 cy;
+ u32 bpp; /* Which has never been used... */
+ u32 display;
+ u32 dx; /**< X offset into the virtual frame-buffer. */
+ u32 dy; /**< Y offset into the virtual frame-buffer. */
+ u32 enabled; /* Not flags. Add new members for new flags. */
+} __packed;
+
+#define VBVAMODEHINT_MAGIC 0x0801add9u
+
+/**
+ * Report the rectangle relative to which absolute pointer events should be
+ * expressed. This information remains valid until the next VBVA resize event
+ * for any screen, at which time it is reset to the bounding rectangle of all
+ * virtual screens and must be re-set.
+ * @see VBVA_REPORT_INPUT_MAPPING.
+ */
+struct vbva_report_input_mapping {
+ s32 x; /**< Upper left X co-ordinate relative to the first screen. */
+ s32 y; /**< Upper left Y co-ordinate relative to the first screen. */
+ u32 cx; /**< Rectangle width. */
+ u32 cy; /**< Rectangle height. */
+} __packed;
+
+/**
+ * Report the guest cursor position and query the host one. The host may wish
+ * to use the guest information to re-position its own cursor (though this is
+ * currently unlikely).
+ * @see VBVA_CURSOR_POSITION
+ */
+struct vbva_cursor_position {
+ u32 report_position; /**< Are we reporting a position? */
+ u32 x; /**< Guest cursor X position */
+ u32 y; /**< Guest cursor Y position */
+} __packed;
+
+#endif
diff --git a/drivers/staging/vboxvideo/vboxvideo_guest.h b/drivers/staging/vboxvideo/vboxvideo_guest.h
new file mode 100644
index 0000000..d09da84
--- /dev/null
+++ b/drivers/staging/vboxvideo/vboxvideo_guest.h
@@ -0,0 +1,95 @@
+/*
+ * Copyright (C) 2006-2017 Oracle Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef __VBOXVIDEO_GUEST_H__
+#define __VBOXVIDEO_GUEST_H__
+
+#include <linux/genalloc.h>
+#include "vboxvideo.h"
+
+/**
+ * Structure grouping the context needed for sending graphics acceleration
+ * information to the host via VBVA. Each screen has its own VBVA buffer.
+ */
+struct vbva_buf_ctx {
+ /** Offset of the buffer in the VRAM section for the screen */
+ u32 buffer_offset;
+ /** Length of the buffer in bytes */
+ u32 buffer_length;
+ /** Set if we wrote to the buffer faster than the host could read it */
+ bool buffer_overflow;
+ /** VBVA record that we are currently preparing for the host, or NULL */
+ struct vbva_record *record;
+ /**
+ * Pointer to the VBVA buffer mapped into the current address space.
+ * Will be NULL if VBVA is not enabled.
+ */
+ struct vbva_buffer *vbva;
+};
+
+/**
+ * @name Base HGSMI APIs
+ * @{
+ */
+int hgsmi_report_flags_location(struct gen_pool *ctx, u32 location);
+int hgsmi_send_caps_info(struct gen_pool *ctx, u32 caps);
+int hgsmi_test_query_conf(struct gen_pool *ctx);
+int hgsmi_query_conf(struct gen_pool *ctx, u32 index, u32 *value_ret);
+int hgsmi_update_pointer_shape(struct gen_pool *ctx, u32 flags,
+ u32 hot_x, u32 hot_y, u32 width, u32 height,
+ u8 *pixels, u32 len);
+int hgsmi_cursor_position(struct gen_pool *ctx, bool report_position,
+ u32 x, u32 y, u32 *x_host, u32 *y_host);
+/** @} */
+
+/**
+ * @name VBVA APIs
+ * @{
+ */
+bool vbva_enable(struct vbva_buf_ctx *vbva_ctx, struct gen_pool *ctx,
+ struct vbva_buffer *vbva, s32 screen);
+void vbva_disable(struct vbva_buf_ctx *vbva_ctx, struct gen_pool *ctx,
+ s32 screen);
+bool vbva_buffer_begin_update(struct vbva_buf_ctx *vbva_ctx,
+ struct gen_pool *ctx);
+void vbva_buffer_end_update(struct vbva_buf_ctx *vbva_ctx);
+bool vbva_write(struct vbva_buf_ctx *vbva_ctx, struct gen_pool *ctx,
+ const void *p, u32 len);
+void vbva_setup_buffer_context(struct vbva_buf_ctx *vbva_ctx,
+ u32 buffer_offset, u32 buffer_length);
+/** @} */
+
+/**
+ * @name Modesetting APIs
+ * @{
+ */
+void hgsmi_process_display_info(struct gen_pool *ctx, u32 display,
+ s32 origin_x, s32 origin_y, u32 start_offset,
+ u32 pitch, u32 width, u32 height,
+ u16 bpp, u16 flags);
+int hgsmi_update_input_mapping(struct gen_pool *ctx, s32 origin_x, s32 origin_y,
+ u32 width, u32 height);
+int hgsmi_get_mode_hints(struct gen_pool *ctx, unsigned int screens,
+ struct vbva_modehint *hints);
+/** @} */
+
+#endif
diff --git a/drivers/staging/vboxvideo/vboxvideo_vbe.h b/drivers/staging/vboxvideo/vboxvideo_vbe.h
new file mode 100644
index 0000000..f842f4d
--- /dev/null
+++ b/drivers/staging/vboxvideo/vboxvideo_vbe.h
@@ -0,0 +1,84 @@
+/*
+ * Copyright (C) 2006-2017 Oracle Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef __VBOXVIDEO_VBE_H__
+#define __VBOXVIDEO_VBE_H__
+
+/* GUEST <-> HOST Communication API */
+
+/**
+ * @todo FIXME: Either dynamicly ask host for this or put somewhere high in
+ * physical memory like 0xE0000000.
+ */
+
+#define VBE_DISPI_BANK_ADDRESS 0xA0000
+#define VBE_DISPI_BANK_SIZE_KB 64
+
+#define VBE_DISPI_MAX_XRES 16384
+#define VBE_DISPI_MAX_YRES 16384
+#define VBE_DISPI_MAX_BPP 32
+
+#define VBE_DISPI_IOPORT_INDEX 0x01CE
+#define VBE_DISPI_IOPORT_DATA 0x01CF
+
+#define VBE_DISPI_IOPORT_DAC_WRITE_INDEX 0x03C8
+#define VBE_DISPI_IOPORT_DAC_DATA 0x03C9
+
+#define VBE_DISPI_INDEX_ID 0x0
+#define VBE_DISPI_INDEX_XRES 0x1
+#define VBE_DISPI_INDEX_YRES 0x2
+#define VBE_DISPI_INDEX_BPP 0x3
+#define VBE_DISPI_INDEX_ENABLE 0x4
+#define VBE_DISPI_INDEX_BANK 0x5
+#define VBE_DISPI_INDEX_VIRT_WIDTH 0x6
+#define VBE_DISPI_INDEX_VIRT_HEIGHT 0x7
+#define VBE_DISPI_INDEX_X_OFFSET 0x8
+#define VBE_DISPI_INDEX_Y_OFFSET 0x9
+#define VBE_DISPI_INDEX_VBOX_VIDEO 0xa
+#define VBE_DISPI_INDEX_FB_BASE_HI 0xb
+
+#define VBE_DISPI_ID0 0xB0C0
+#define VBE_DISPI_ID1 0xB0C1
+#define VBE_DISPI_ID2 0xB0C2
+#define VBE_DISPI_ID3 0xB0C3
+#define VBE_DISPI_ID4 0xB0C4
+
+#define VBE_DISPI_ID_VBOX_VIDEO 0xBE00
+/* The VBOX interface id. Indicates support for VBVA shared memory interface. */
+#define VBE_DISPI_ID_HGSMI 0xBE01
+#define VBE_DISPI_ID_ANYX 0xBE02
+
+#define VBE_DISPI_DISABLED 0x00
+#define VBE_DISPI_ENABLED 0x01
+#define VBE_DISPI_GETCAPS 0x02
+#define VBE_DISPI_8BIT_DAC 0x20
+/**
+ * @note this definition is a BOCHS legacy, used only in the video BIOS
+ * code and ignored by the emulated hardware.
+ */
+#define VBE_DISPI_LFB_ENABLED 0x40
+#define VBE_DISPI_NOCLEARMEM 0x80
+
+#define VGA_PORT_HGSMI_HOST 0x3b0
+#define VGA_PORT_HGSMI_GUEST 0x3d0
+
+#endif
diff --git a/drivers/staging/vboxvideo/vbva_base.c b/drivers/staging/vboxvideo/vbva_base.c
new file mode 100644
index 0000000..c10c782
--- /dev/null
+++ b/drivers/staging/vboxvideo/vbva_base.c
@@ -0,0 +1,233 @@
+/*
+ * Copyright (C) 2006-2017 Oracle Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "vbox_drv.h"
+#include "vbox_err.h"
+#include "vboxvideo_guest.h"
+#include "hgsmi_channels.h"
+
+/*
+ * There is a hardware ring buffer in the graphics device video RAM, formerly
+ * in the VBox VMMDev PCI memory space.
+ * All graphics commands go there serialized by vbva_buffer_begin_update.
+ * and vbva_buffer_end_update.
+ *
+ * free_offset is writing position. data_offset is reading position.
+ * free_offset == data_offset means buffer is empty.
+ * There must be always gap between data_offset and free_offset when data
+ * are in the buffer.
+ * Guest only changes free_offset, host changes data_offset.
+ */
+
+static u32 vbva_buffer_available(const struct vbva_buffer *vbva)
+{
+ s32 diff = vbva->data_offset - vbva->free_offset;
+
+ return diff > 0 ? diff : vbva->data_len + diff;
+}
+
+static void vbva_buffer_place_data_at(struct vbva_buf_ctx *vbva_ctx,
+ const void *p, u32 len, u32 offset)
+{
+ struct vbva_buffer *vbva = vbva_ctx->vbva;
+ u32 bytes_till_boundary = vbva->data_len - offset;
+ u8 *dst = &vbva->data[offset];
+ s32 diff = len - bytes_till_boundary;
+
+ if (diff <= 0) {
+ /* Chunk will not cross buffer boundary. */
+ memcpy(dst, p, len);
+ } else {
+ /* Chunk crosses buffer boundary. */
+ memcpy(dst, p, bytes_till_boundary);
+ memcpy(&vbva->data[0], (u8 *)p + bytes_till_boundary, diff);
+ }
+}
+
+static void vbva_buffer_flush(struct gen_pool *ctx)
+{
+ struct vbva_flush *p;
+
+ p = hgsmi_buffer_alloc(ctx, sizeof(*p), HGSMI_CH_VBVA, VBVA_FLUSH);
+ if (!p)
+ return;
+
+ p->reserved = 0;
+
+ hgsmi_buffer_submit(ctx, p);
+ hgsmi_buffer_free(ctx, p);
+}
+
+bool vbva_write(struct vbva_buf_ctx *vbva_ctx, struct gen_pool *ctx,
+ const void *p, u32 len)
+{
+ struct vbva_record *record;
+ struct vbva_buffer *vbva;
+ u32 available;
+
+ vbva = vbva_ctx->vbva;
+ record = vbva_ctx->record;
+
+ if (!vbva || vbva_ctx->buffer_overflow ||
+ !record || !(record->len_and_flags & VBVA_F_RECORD_PARTIAL))
+ return false;
+
+ available = vbva_buffer_available(vbva);
+
+ while (len > 0) {
+ u32 chunk = len;
+
+ if (chunk >= available) {
+ vbva_buffer_flush(ctx);
+ available = vbva_buffer_available(vbva);
+ }
+
+ if (chunk >= available) {
+ if (WARN_ON(available <= vbva->partial_write_tresh)) {
+ vbva_ctx->buffer_overflow = true;
+ return false;
+ }
+ chunk = available - vbva->partial_write_tresh;
+ }
+
+ vbva_buffer_place_data_at(vbva_ctx, p, chunk,
+ vbva->free_offset);
+
+ vbva->free_offset = (vbva->free_offset + chunk) %
+ vbva->data_len;
+ record->len_and_flags += chunk;
+ available -= chunk;
+ len -= chunk;
+ p += chunk;
+ }
+
+ return true;
+}
+
+static bool vbva_inform_host(struct vbva_buf_ctx *vbva_ctx,
+ struct gen_pool *ctx, s32 screen, bool enable)
+{
+ struct vbva_enable_ex *p;
+ bool ret;
+
+ p = hgsmi_buffer_alloc(ctx, sizeof(*p), HGSMI_CH_VBVA, VBVA_ENABLE);
+ if (!p)
+ return false;
+
+ p->base.flags = enable ? VBVA_F_ENABLE : VBVA_F_DISABLE;
+ p->base.offset = vbva_ctx->buffer_offset;
+ p->base.result = VERR_NOT_SUPPORTED;
+ if (screen >= 0) {
+ p->base.flags |= VBVA_F_EXTENDED | VBVA_F_ABSOFFSET;
+ p->screen_id = screen;
+ }
+
+ hgsmi_buffer_submit(ctx, p);
+
+ if (enable)
+ ret = RT_SUCCESS(p->base.result);
+ else
+ ret = true;
+
+ hgsmi_buffer_free(ctx, p);
+
+ return ret;
+}
+
+bool vbva_enable(struct vbva_buf_ctx *vbva_ctx, struct gen_pool *ctx,
+ struct vbva_buffer *vbva, s32 screen)
+{
+ bool ret = false;
+
+ memset(vbva, 0, sizeof(*vbva));
+ vbva->partial_write_tresh = 256;
+ vbva->data_len = vbva_ctx->buffer_length - sizeof(struct vbva_buffer);
+ vbva_ctx->vbva = vbva;
+
+ ret = vbva_inform_host(vbva_ctx, ctx, screen, true);
+ if (!ret)
+ vbva_disable(vbva_ctx, ctx, screen);
+
+ return ret;
+}
+
+void vbva_disable(struct vbva_buf_ctx *vbva_ctx, struct gen_pool *ctx,
+ s32 screen)
+{
+ vbva_ctx->buffer_overflow = false;
+ vbva_ctx->record = NULL;
+ vbva_ctx->vbva = NULL;
+
+ vbva_inform_host(vbva_ctx, ctx, screen, false);
+}
+
+bool vbva_buffer_begin_update(struct vbva_buf_ctx *vbva_ctx,
+ struct gen_pool *ctx)
+{
+ struct vbva_record *record;
+ u32 next;
+
+ if (!vbva_ctx->vbva ||
+ !(vbva_ctx->vbva->host_flags.host_events & VBVA_F_MODE_ENABLED))
+ return false;
+
+ WARN_ON(vbva_ctx->buffer_overflow || vbva_ctx->record);
+
+ next = (vbva_ctx->vbva->record_free_index + 1) % VBVA_MAX_RECORDS;
+
+ /* Flush if all slots in the records queue are used */
+ if (next == vbva_ctx->vbva->record_first_index)
+ vbva_buffer_flush(ctx);
+
+ /* If even after flush there is no place then fail the request */
+ if (next == vbva_ctx->vbva->record_first_index)
+ return false;
+
+ record = &vbva_ctx->vbva->records[vbva_ctx->vbva->record_free_index];
+ record->len_and_flags = VBVA_F_RECORD_PARTIAL;
+ vbva_ctx->vbva->record_free_index = next;
+ /* Remember which record we are using. */
+ vbva_ctx->record = record;
+
+ return true;
+}
+
+void vbva_buffer_end_update(struct vbva_buf_ctx *vbva_ctx)
+{
+ struct vbva_record *record = vbva_ctx->record;
+
+ WARN_ON(!vbva_ctx->vbva || !record ||
+ !(record->len_and_flags & VBVA_F_RECORD_PARTIAL));
+
+ /* Mark the record completed. */
+ record->len_and_flags &= ~VBVA_F_RECORD_PARTIAL;
+
+ vbva_ctx->buffer_overflow = false;
+ vbva_ctx->record = NULL;
+}
+
+void vbva_setup_buffer_context(struct vbva_buf_ctx *vbva_ctx,
+ u32 buffer_offset, u32 buffer_length)
+{
+ vbva_ctx->buffer_offset = buffer_offset;
+ vbva_ctx->buffer_length = buffer_length;
+}
diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
index 030bec8..314ffac 100644
--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
@@ -3391,7 +3391,6 @@
struct device_node *fw_node;
struct rpi_firmware *fw;
int err;
- void *ptr_err;
fw_node = of_parse_phandle(pdev->dev.of_node, "firmware", 0);
if (!fw_node) {
@@ -3427,14 +3426,14 @@
/* create sysfs entries */
vchiq_class = class_create(THIS_MODULE, DEVICE_NAME);
- ptr_err = vchiq_class;
- if (IS_ERR(ptr_err))
+ err = PTR_ERR(vchiq_class);
+ if (IS_ERR(vchiq_class))
goto failed_class_create;
vchiq_dev = device_create(vchiq_class, NULL,
vchiq_devid, NULL, "vchiq");
- ptr_err = vchiq_dev;
- if (IS_ERR(ptr_err))
+ err = PTR_ERR(vchiq_dev);
+ if (IS_ERR(vchiq_dev))
goto failed_device_create;
/* create debugfs entries */
@@ -3455,7 +3454,6 @@
class_destroy(vchiq_class);
failed_class_create:
cdev_del(&vchiq_cdev);
- err = PTR_ERR(ptr_err);
failed_cdev_add:
unregister_chrdev_region(vchiq_devid, 1);
failed_platform_init:
diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c
index 3fdca2c..74e4975 100644
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -488,15 +488,13 @@
void iscsit_aborted_task(struct iscsi_conn *conn, struct iscsi_cmd *cmd)
{
- bool scsi_cmd = (cmd->iscsi_opcode == ISCSI_OP_SCSI_CMD);
-
spin_lock_bh(&conn->cmd_lock);
if (!list_empty(&cmd->i_conn_node) &&
!(cmd->se_cmd.transport_state & CMD_T_FABRIC_STOP))
list_del_init(&cmd->i_conn_node);
spin_unlock_bh(&conn->cmd_lock);
- __iscsit_free_cmd(cmd, scsi_cmd, true);
+ __iscsit_free_cmd(cmd, true);
}
EXPORT_SYMBOL(iscsit_aborted_task);
@@ -1251,12 +1249,8 @@
* execution. These exceptions are processed in CmdSN order using
* iscsit_check_received_cmdsn() in iscsit_get_immediate_data() below.
*/
- if (cmd->sense_reason) {
- if (cmd->reject_reason)
- return 0;
-
+ if (cmd->sense_reason)
return 1;
- }
/*
* Call directly into transport_generic_new_cmd() to perform
* the backend memory allocation.
diff --git a/drivers/target/iscsi/iscsi_target_auth.c b/drivers/target/iscsi/iscsi_target_auth.c
index 903b667..f9bc8ec 100644
--- a/drivers/target/iscsi/iscsi_target_auth.c
+++ b/drivers/target/iscsi/iscsi_target_auth.c
@@ -47,18 +47,21 @@
}
}
-static void chap_gen_challenge(
+static int chap_gen_challenge(
struct iscsi_conn *conn,
int caller,
char *c_str,
unsigned int *c_len)
{
+ int ret;
unsigned char challenge_asciihex[CHAP_CHALLENGE_LENGTH * 2 + 1];
struct iscsi_chap *chap = conn->auth_protocol;
memset(challenge_asciihex, 0, CHAP_CHALLENGE_LENGTH * 2 + 1);
- get_random_bytes(chap->challenge, CHAP_CHALLENGE_LENGTH);
+ ret = get_random_bytes_wait(chap->challenge, CHAP_CHALLENGE_LENGTH);
+ if (unlikely(ret))
+ return ret;
chap_binaryhex_to_asciihex(challenge_asciihex, chap->challenge,
CHAP_CHALLENGE_LENGTH);
/*
@@ -69,6 +72,7 @@
pr_debug("[%s] Sending CHAP_C=0x%s\n\n", (caller) ? "server" : "client",
challenge_asciihex);
+ return 0;
}
static int chap_check_algorithm(const char *a_str)
@@ -143,6 +147,7 @@
case CHAP_DIGEST_UNKNOWN:
default:
pr_err("Unsupported CHAP_A value\n");
+ kfree(conn->auth_protocol);
return NULL;
}
@@ -156,7 +161,10 @@
/*
* Generate Challenge.
*/
- chap_gen_challenge(conn, 1, aic_str, aic_len);
+ if (chap_gen_challenge(conn, 1, aic_str, aic_len) < 0) {
+ kfree(conn->auth_protocol);
+ return NULL;
+ }
return chap;
}
diff --git a/drivers/target/iscsi/iscsi_target_configfs.c b/drivers/target/iscsi/iscsi_target_configfs.c
index 535a8e0..0dd4c45 100644
--- a/drivers/target/iscsi/iscsi_target_configfs.c
+++ b/drivers/target/iscsi/iscsi_target_configfs.c
@@ -781,6 +781,7 @@
DEF_TPG_ATTRIB(t10_pi);
DEF_TPG_ATTRIB(fabric_prot_type);
DEF_TPG_ATTRIB(tpg_enabled_sendtargets);
+DEF_TPG_ATTRIB(login_keys_workaround);
static struct configfs_attribute *lio_target_tpg_attrib_attrs[] = {
&iscsi_tpg_attrib_attr_authentication,
@@ -796,6 +797,7 @@
&iscsi_tpg_attrib_attr_t10_pi,
&iscsi_tpg_attrib_attr_fabric_prot_type,
&iscsi_tpg_attrib_attr_tpg_enabled_sendtargets,
+ &iscsi_tpg_attrib_attr_login_keys_workaround,
NULL,
};
diff --git a/drivers/target/iscsi/iscsi_target_login.c b/drivers/target/iscsi/iscsi_target_login.c
index 92b96b5..e9bdc8b 100644
--- a/drivers/target/iscsi/iscsi_target_login.c
+++ b/drivers/target/iscsi/iscsi_target_login.c
@@ -245,22 +245,26 @@
return 0;
}
-static void iscsi_login_set_conn_values(
+static int iscsi_login_set_conn_values(
struct iscsi_session *sess,
struct iscsi_conn *conn,
__be16 cid)
{
+ int ret;
conn->sess = sess;
conn->cid = be16_to_cpu(cid);
/*
* Generate a random Status sequence number (statsn) for the new
* iSCSI connection.
*/
- get_random_bytes(&conn->stat_sn, sizeof(u32));
+ ret = get_random_bytes_wait(&conn->stat_sn, sizeof(u32));
+ if (unlikely(ret))
+ return ret;
mutex_lock(&auth_id_lock);
conn->auth_id = iscsit_global->auth_id++;
mutex_unlock(&auth_id_lock);
+ return 0;
}
__printf(2, 3) int iscsi_change_param_sprintf(
@@ -306,7 +310,11 @@
return -ENOMEM;
}
- iscsi_login_set_conn_values(sess, conn, pdu->cid);
+ ret = iscsi_login_set_conn_values(sess, conn, pdu->cid);
+ if (unlikely(ret)) {
+ kfree(sess);
+ return ret;
+ }
sess->init_task_tag = pdu->itt;
memcpy(&sess->isid, pdu->isid, 6);
sess->exp_cmd_sn = be32_to_cpu(pdu->cmdsn);
@@ -497,8 +505,7 @@
{
struct iscsi_login_req *pdu = (struct iscsi_login_req *)buf;
- iscsi_login_set_conn_values(NULL, conn, pdu->cid);
- return 0;
+ return iscsi_login_set_conn_values(NULL, conn, pdu->cid);
}
/*
@@ -554,9 +561,8 @@
atomic_set(&sess->session_continuation, 1);
spin_unlock_bh(&sess->conn_lock);
- iscsi_login_set_conn_values(sess, conn, pdu->cid);
-
- if (iscsi_copy_param_list(&conn->param_list,
+ if (iscsi_login_set_conn_values(sess, conn, pdu->cid) < 0 ||
+ iscsi_copy_param_list(&conn->param_list,
conn->tpg->param_list, 0) < 0) {
iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR,
ISCSI_LOGIN_STATUS_NO_RESOURCES);
diff --git a/drivers/target/iscsi/iscsi_target_nego.c b/drivers/target/iscsi/iscsi_target_nego.c
index 6f88b31..7a6751f 100644
--- a/drivers/target/iscsi/iscsi_target_nego.c
+++ b/drivers/target/iscsi/iscsi_target_nego.c
@@ -655,28 +655,6 @@
iscsit_deaccess_np(np, tpg, tpg_np);
}
-static void iscsi_target_do_cleanup(struct work_struct *work)
-{
- struct iscsi_conn *conn = container_of(work,
- struct iscsi_conn, login_cleanup_work.work);
- struct sock *sk = conn->sock->sk;
- struct iscsi_login *login = conn->login;
- struct iscsi_np *np = login->np;
- struct iscsi_portal_group *tpg = conn->tpg;
- struct iscsi_tpg_np *tpg_np = conn->tpg_np;
-
- pr_debug("Entering iscsi_target_do_cleanup\n");
-
- cancel_delayed_work_sync(&conn->login_work);
- conn->orig_state_change(sk);
-
- iscsi_target_restore_sock_callbacks(conn);
- iscsi_target_login_drop(conn, login);
- iscsit_deaccess_np(np, tpg, tpg_np);
-
- pr_debug("iscsi_target_do_cleanup done()\n");
-}
-
static void iscsi_target_sk_state_change(struct sock *sk)
{
struct iscsi_conn *conn;
@@ -886,7 +864,8 @@
SENDER_TARGET,
login->rsp_buf,
&login->rsp_length,
- conn->param_list);
+ conn->param_list,
+ conn->tpg->tpg_attrib.login_keys_workaround);
if (ret < 0)
return -1;
@@ -956,7 +935,8 @@
SENDER_TARGET,
login->rsp_buf,
&login->rsp_length,
- conn->param_list);
+ conn->param_list,
+ conn->tpg->tpg_attrib.login_keys_workaround);
if (ret < 0) {
iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_INITIATOR_ERR,
ISCSI_LOGIN_STATUS_INIT_ERR);
@@ -1082,7 +1062,6 @@
int sessiontype = 0, ret = 0, tag_num, tag_size;
INIT_DELAYED_WORK(&conn->login_work, iscsi_target_do_login_rx);
- INIT_DELAYED_WORK(&conn->login_cleanup_work, iscsi_target_do_cleanup);
iscsi_target_set_sock_callbacks(conn);
login->np = np;
@@ -1331,7 +1310,6 @@
if (ret < 0) {
cancel_delayed_work_sync(&conn->login_work);
- cancel_delayed_work_sync(&conn->login_cleanup_work);
iscsi_target_restore_sock_callbacks(conn);
iscsi_remove_failed_auth_entry(conn);
}
diff --git a/drivers/target/iscsi/iscsi_target_parameters.c b/drivers/target/iscsi/iscsi_target_parameters.c
index fce6276..caab104 100644
--- a/drivers/target/iscsi/iscsi_target_parameters.c
+++ b/drivers/target/iscsi/iscsi_target_parameters.c
@@ -765,7 +765,8 @@
return 0;
}
-static void iscsi_check_proposer_for_optional_reply(struct iscsi_param *param)
+static void iscsi_check_proposer_for_optional_reply(struct iscsi_param *param,
+ bool keys_workaround)
{
if (IS_TYPE_BOOL_AND(param)) {
if (!strcmp(param->value, NO))
@@ -773,19 +774,31 @@
} else if (IS_TYPE_BOOL_OR(param)) {
if (!strcmp(param->value, YES))
SET_PSTATE_REPLY_OPTIONAL(param);
- /*
- * Required for gPXE iSCSI boot client
- */
- if (!strcmp(param->name, IMMEDIATEDATA))
- SET_PSTATE_REPLY_OPTIONAL(param);
+
+ if (keys_workaround) {
+ /*
+ * Required for gPXE iSCSI boot client
+ */
+ if (!strcmp(param->name, IMMEDIATEDATA))
+ SET_PSTATE_REPLY_OPTIONAL(param);
+ }
} else if (IS_TYPE_NUMBER(param)) {
if (!strcmp(param->name, MAXRECVDATASEGMENTLENGTH))
SET_PSTATE_REPLY_OPTIONAL(param);
- /*
- * Required for gPXE iSCSI boot client
- */
- if (!strcmp(param->name, MAXCONNECTIONS))
- SET_PSTATE_REPLY_OPTIONAL(param);
+
+ if (keys_workaround) {
+ /*
+ * Required for Mellanox Flexboot PXE boot ROM
+ */
+ if (!strcmp(param->name, FIRSTBURSTLENGTH))
+ SET_PSTATE_REPLY_OPTIONAL(param);
+
+ /*
+ * Required for gPXE iSCSI boot client
+ */
+ if (!strcmp(param->name, MAXCONNECTIONS))
+ SET_PSTATE_REPLY_OPTIONAL(param);
+ }
} else if (IS_PHASE_DECLARATIVE(param))
SET_PSTATE_REPLY_OPTIONAL(param);
}
@@ -1422,7 +1435,8 @@
u8 sender,
char *textbuf,
u32 *length,
- struct iscsi_param_list *param_list)
+ struct iscsi_param_list *param_list,
+ bool keys_workaround)
{
char *output_buf = NULL;
struct iscsi_extra_response *er;
@@ -1458,7 +1472,8 @@
*length += 1;
output_buf = textbuf + *length;
SET_PSTATE_PROPOSER(param);
- iscsi_check_proposer_for_optional_reply(param);
+ iscsi_check_proposer_for_optional_reply(param,
+ keys_workaround);
pr_debug("Sending key: %s=%s\n",
param->name, param->value);
}
diff --git a/drivers/target/iscsi/iscsi_target_parameters.h b/drivers/target/iscsi/iscsi_target_parameters.h
index 9962ccf..c47b73f 100644
--- a/drivers/target/iscsi/iscsi_target_parameters.h
+++ b/drivers/target/iscsi/iscsi_target_parameters.h
@@ -46,7 +46,7 @@
extern int iscsi_update_param_value(struct iscsi_param *, char *);
extern int iscsi_decode_text_input(u8, u8, char *, u32, struct iscsi_conn *);
extern int iscsi_encode_text_output(u8, u8, char *, u32 *,
- struct iscsi_param_list *);
+ struct iscsi_param_list *, bool);
extern int iscsi_check_negotiated_keys(struct iscsi_param_list *);
extern void iscsi_set_connection_parameters(struct iscsi_conn_ops *,
struct iscsi_param_list *);
diff --git a/drivers/target/iscsi/iscsi_target_tpg.c b/drivers/target/iscsi/iscsi_target_tpg.c
index 2e7e08d..594d07a 100644
--- a/drivers/target/iscsi/iscsi_target_tpg.c
+++ b/drivers/target/iscsi/iscsi_target_tpg.c
@@ -227,6 +227,7 @@
a->t10_pi = TA_DEFAULT_T10_PI;
a->fabric_prot_type = TA_DEFAULT_FABRIC_PROT_TYPE;
a->tpg_enabled_sendtargets = TA_DEFAULT_TPG_ENABLED_SENDTARGETS;
+ a->login_keys_workaround = TA_DEFAULT_LOGIN_KEYS_WORKAROUND;
}
int iscsit_tpg_add_portal_group(struct iscsi_tiqn *tiqn, struct iscsi_portal_group *tpg)
@@ -311,11 +312,9 @@
struct iscsi_tiqn *tiqn = tpg->tpg_tiqn;
int ret;
- spin_lock(&tpg->tpg_state_lock);
if (tpg->tpg_state == TPG_STATE_ACTIVE) {
pr_err("iSCSI target portal group: %hu is already"
" active, ignoring request.\n", tpg->tpgt);
- spin_unlock(&tpg->tpg_state_lock);
return -EINVAL;
}
/*
@@ -324,10 +323,8 @@
* is enforced (as per default), and remove the NONE option.
*/
param = iscsi_find_param_from_key(AUTHMETHOD, tpg->param_list);
- if (!param) {
- spin_unlock(&tpg->tpg_state_lock);
+ if (!param)
return -EINVAL;
- }
if (tpg->tpg_attrib.authentication) {
if (!strcmp(param->value, NONE)) {
@@ -341,6 +338,7 @@
goto err;
}
+ spin_lock(&tpg->tpg_state_lock);
tpg->tpg_state = TPG_STATE_ACTIVE;
spin_unlock(&tpg->tpg_state_lock);
@@ -353,7 +351,6 @@
return 0;
err:
- spin_unlock(&tpg->tpg_state_lock);
return ret;
}
@@ -899,3 +896,21 @@
return 0;
}
+
+int iscsit_ta_login_keys_workaround(
+ struct iscsi_portal_group *tpg,
+ u32 flag)
+{
+ struct iscsi_tpg_attrib *a = &tpg->tpg_attrib;
+
+ if ((flag != 0) && (flag != 1)) {
+ pr_err("Illegal value %d\n", flag);
+ return -EINVAL;
+ }
+
+ a->login_keys_workaround = flag;
+ pr_debug("iSCSI_TPG[%hu] - TPG enabled bit for login keys workaround: %s ",
+ tpg->tpgt, (a->login_keys_workaround) ? "ON" : "OFF");
+
+ return 0;
+}
diff --git a/drivers/target/iscsi/iscsi_target_tpg.h b/drivers/target/iscsi/iscsi_target_tpg.h
index ceba298..59fd3ca 100644
--- a/drivers/target/iscsi/iscsi_target_tpg.h
+++ b/drivers/target/iscsi/iscsi_target_tpg.h
@@ -48,5 +48,6 @@
extern int iscsit_ta_t10_pi(struct iscsi_portal_group *, u32);
extern int iscsit_ta_fabric_prot_type(struct iscsi_portal_group *, u32);
extern int iscsit_ta_tpg_enabled_sendtargets(struct iscsi_portal_group *, u32);
+extern int iscsit_ta_login_keys_workaround(struct iscsi_portal_group *, u32);
#endif /* ISCSI_TARGET_TPG_H */
diff --git a/drivers/target/iscsi/iscsi_target_util.c b/drivers/target/iscsi/iscsi_target_util.c
index 7d3e2fc..1e36f83 100644
--- a/drivers/target/iscsi/iscsi_target_util.c
+++ b/drivers/target/iscsi/iscsi_target_util.c
@@ -167,6 +167,7 @@
cmd->se_cmd.map_tag = tag;
cmd->conn = conn;
+ cmd->data_direction = DMA_NONE;
INIT_LIST_HEAD(&cmd->i_conn_node);
INIT_LIST_HEAD(&cmd->datain_list);
INIT_LIST_HEAD(&cmd->cmd_r2t_list);
@@ -711,19 +712,16 @@
}
EXPORT_SYMBOL(iscsit_release_cmd);
-void __iscsit_free_cmd(struct iscsi_cmd *cmd, bool scsi_cmd,
- bool check_queues)
+void __iscsit_free_cmd(struct iscsi_cmd *cmd, bool check_queues)
{
struct iscsi_conn *conn = cmd->conn;
- if (scsi_cmd) {
- if (cmd->data_direction == DMA_TO_DEVICE) {
- iscsit_stop_dataout_timer(cmd);
- iscsit_free_r2ts_from_list(cmd);
- }
- if (cmd->data_direction == DMA_FROM_DEVICE)
- iscsit_free_all_datain_reqs(cmd);
+ if (cmd->data_direction == DMA_TO_DEVICE) {
+ iscsit_stop_dataout_timer(cmd);
+ iscsit_free_r2ts_from_list(cmd);
}
+ if (cmd->data_direction == DMA_FROM_DEVICE)
+ iscsit_free_all_datain_reqs(cmd);
if (conn && check_queues) {
iscsit_remove_cmd_from_immediate_queue(cmd, conn);
@@ -736,50 +734,18 @@
void iscsit_free_cmd(struct iscsi_cmd *cmd, bool shutdown)
{
- struct se_cmd *se_cmd = NULL;
+ struct se_cmd *se_cmd = cmd->se_cmd.se_tfo ? &cmd->se_cmd : NULL;
int rc;
- bool op_scsi = false;
- /*
- * Determine if a struct se_cmd is associated with
- * this struct iscsi_cmd.
- */
- switch (cmd->iscsi_opcode) {
- case ISCSI_OP_SCSI_CMD:
- op_scsi = true;
- /*
- * Fallthrough
- */
- case ISCSI_OP_SCSI_TMFUNC:
- se_cmd = &cmd->se_cmd;
- __iscsit_free_cmd(cmd, op_scsi, shutdown);
+
+ __iscsit_free_cmd(cmd, shutdown);
+ if (se_cmd) {
rc = transport_generic_free_cmd(se_cmd, shutdown);
if (!rc && shutdown && se_cmd->se_sess) {
- __iscsit_free_cmd(cmd, op_scsi, shutdown);
+ __iscsit_free_cmd(cmd, shutdown);
target_put_sess_cmd(se_cmd);
}
- break;
- case ISCSI_OP_REJECT:
- /*
- * Handle special case for REJECT when iscsi_add_reject*() has
- * overwritten the original iscsi_opcode assignment, and the
- * associated cmd->se_cmd needs to be released.
- */
- if (cmd->se_cmd.se_tfo != NULL) {
- se_cmd = &cmd->se_cmd;
- __iscsit_free_cmd(cmd, true, shutdown);
-
- rc = transport_generic_free_cmd(&cmd->se_cmd, shutdown);
- if (!rc && shutdown && se_cmd->se_sess) {
- __iscsit_free_cmd(cmd, true, shutdown);
- target_put_sess_cmd(se_cmd);
- }
- break;
- }
- /* Fall-through */
- default:
- __iscsit_free_cmd(cmd, false, shutdown);
+ } else {
iscsit_release_cmd(cmd);
- break;
}
}
EXPORT_SYMBOL(iscsit_free_cmd);
diff --git a/drivers/target/iscsi/iscsi_target_util.h b/drivers/target/iscsi/iscsi_target_util.h
index 9e4197a..4251605 100644
--- a/drivers/target/iscsi/iscsi_target_util.h
+++ b/drivers/target/iscsi/iscsi_target_util.h
@@ -37,7 +37,7 @@
extern bool iscsit_conn_all_queues_empty(struct iscsi_conn *);
extern void iscsit_free_queue_reqs_for_conn(struct iscsi_conn *);
extern void iscsit_release_cmd(struct iscsi_cmd *);
-extern void __iscsit_free_cmd(struct iscsi_cmd *, bool, bool);
+extern void __iscsit_free_cmd(struct iscsi_cmd *, bool);
extern void iscsit_free_cmd(struct iscsi_cmd *, bool);
extern int iscsit_check_session_usage_count(struct iscsi_session *);
extern void iscsit_dec_session_usage_count(struct iscsi_session *);
diff --git a/drivers/target/loopback/tcm_loop.c b/drivers/target/loopback/tcm_loop.c
index 5091b31..b6a913e 100644
--- a/drivers/target/loopback/tcm_loop.c
+++ b/drivers/target/loopback/tcm_loop.c
@@ -51,19 +51,7 @@
*/
static int tcm_loop_check_stop_free(struct se_cmd *se_cmd)
{
- /*
- * Do not release struct se_cmd's containing a valid TMR
- * pointer. These will be released directly in tcm_loop_device_reset()
- * with transport_generic_free_cmd().
- */
- if (se_cmd->se_cmd_flags & SCF_SCSI_TMR_CDB)
- return 0;
- /*
- * Release the struct se_cmd, which will make a callback to release
- * struct tcm_loop_cmd * in tcm_loop_deallocate_core_cmd()
- */
- transport_generic_free_cmd(se_cmd, 0);
- return 1;
+ return transport_generic_free_cmd(se_cmd, 0);
}
static void tcm_loop_release_cmd(struct se_cmd *se_cmd)
@@ -218,10 +206,8 @@
{
struct se_cmd *se_cmd = NULL;
struct se_session *se_sess;
- struct se_portal_group *se_tpg;
struct tcm_loop_nexus *tl_nexus;
struct tcm_loop_cmd *tl_cmd = NULL;
- struct tcm_loop_tmr *tl_tmr = NULL;
int ret = TMR_FUNCTION_FAILED, rc;
/*
@@ -240,55 +226,29 @@
return ret;
}
- tl_tmr = kzalloc(sizeof(struct tcm_loop_tmr), GFP_KERNEL);
- if (!tl_tmr) {
- pr_err("Unable to allocate memory for tl_tmr\n");
- goto release;
- }
- init_waitqueue_head(&tl_tmr->tl_tmr_wait);
+ init_completion(&tl_cmd->tmr_done);
se_cmd = &tl_cmd->tl_se_cmd;
- se_tpg = &tl_tpg->tl_se_tpg;
se_sess = tl_tpg->tl_nexus->se_sess;
- /*
- * Initialize struct se_cmd descriptor from target_core_mod infrastructure
- */
- transport_init_se_cmd(se_cmd, se_tpg->se_tpg_tfo, se_sess, 0,
- DMA_NONE, TCM_SIMPLE_TAG,
- &tl_cmd->tl_sense_buf[0]);
- rc = core_tmr_alloc_req(se_cmd, tl_tmr, tmr, GFP_KERNEL);
+ rc = target_submit_tmr(se_cmd, se_sess, tl_cmd->tl_sense_buf, lun,
+ NULL, tmr, GFP_KERNEL, task,
+ TARGET_SCF_ACK_KREF);
if (rc < 0)
goto release;
-
- if (tmr == TMR_ABORT_TASK)
- se_cmd->se_tmr_req->ref_task_tag = task;
-
- /*
- * Locate the underlying TCM struct se_lun
- */
- if (transport_lookup_tmr_lun(se_cmd, lun) < 0) {
- ret = TMR_LUN_DOES_NOT_EXIST;
- goto release;
- }
- /*
- * Queue the TMR to TCM Core and sleep waiting for
- * tcm_loop_queue_tm_rsp() to wake us up.
- */
- transport_generic_handle_tmr(se_cmd);
- wait_event(tl_tmr->tl_tmr_wait, atomic_read(&tl_tmr->tmr_complete));
- /*
- * The TMR LUN_RESET has completed, check the response status and
- * then release allocations.
- */
+ wait_for_completion(&tl_cmd->tmr_done);
ret = se_cmd->se_tmr_req->response;
+ target_put_sess_cmd(se_cmd);
+
+out:
+ return ret;
+
release:
if (se_cmd)
- transport_generic_free_cmd(se_cmd, 1);
+ transport_generic_free_cmd(se_cmd, 0);
else
kmem_cache_free(tcm_loop_cmd_cache, tl_cmd);
- kfree(tl_tmr);
- return ret;
+ goto out;
}
static int tcm_loop_abort_task(struct scsi_cmnd *sc)
@@ -669,14 +629,11 @@
static void tcm_loop_queue_tm_rsp(struct se_cmd *se_cmd)
{
- struct se_tmr_req *se_tmr = se_cmd->se_tmr_req;
- struct tcm_loop_tmr *tl_tmr = se_tmr->fabric_tmr_ptr;
- /*
- * The SCSI EH thread will be sleeping on se_tmr->tl_tmr_wait, go ahead
- * and wake up the wait_queue_head_t in tcm_loop_device_reset()
- */
- atomic_set(&tl_tmr->tmr_complete, 1);
- wake_up(&tl_tmr->tl_tmr_wait);
+ struct tcm_loop_cmd *tl_cmd = container_of(se_cmd,
+ struct tcm_loop_cmd, tl_se_cmd);
+
+ /* Wake up tcm_loop_issue_tmr(). */
+ complete(&tl_cmd->tmr_done);
}
static void tcm_loop_aborted_task(struct se_cmd *se_cmd)
diff --git a/drivers/target/loopback/tcm_loop.h b/drivers/target/loopback/tcm_loop.h
index a8a230b..3acc43c 100644
--- a/drivers/target/loopback/tcm_loop.h
+++ b/drivers/target/loopback/tcm_loop.h
@@ -16,15 +16,11 @@
/* The TCM I/O descriptor that is accessed via container_of() */
struct se_cmd tl_se_cmd;
struct work_struct work;
+ struct completion tmr_done;
/* Sense buffer that will be mapped into outgoing status */
unsigned char tl_sense_buf[TRANSPORT_SENSE_BUFFER];
};
-struct tcm_loop_tmr {
- atomic_t tmr_complete;
- wait_queue_head_t tl_tmr_wait;
-};
-
struct tcm_loop_nexus {
/*
* Pointer to TCM session for I_T Nexus
diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c
index fc4a9c3..a91b7c2 100644
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -205,8 +205,8 @@
/*
* TARGET PORT GROUP
*/
- buf[off++] = ((tg_pt_gp->tg_pt_gp_id >> 8) & 0xff);
- buf[off++] = (tg_pt_gp->tg_pt_gp_id & 0xff);
+ put_unaligned_be16(tg_pt_gp->tg_pt_gp_id, &buf[off]);
+ off += 2;
off++; /* Skip over Reserved */
/*
@@ -235,8 +235,8 @@
/*
* Set RELATIVE TARGET PORT IDENTIFIER
*/
- buf[off++] = ((lun->lun_rtpi >> 8) & 0xff);
- buf[off++] = (lun->lun_rtpi & 0xff);
+ put_unaligned_be16(lun->lun_rtpi, &buf[off]);
+ off += 2;
rd_len += 4;
}
spin_unlock(&tg_pt_gp->tg_pt_gp_lock);
diff --git a/drivers/target/target_core_configfs.c b/drivers/target/target_core_configfs.c
index 0326607..7e87d95 100644
--- a/drivers/target/target_core_configfs.c
+++ b/drivers/target/target_core_configfs.c
@@ -1085,6 +1085,24 @@
return count;
}
+static ssize_t alua_support_show(struct config_item *item, char *page)
+{
+ struct se_dev_attrib *da = to_attrib(item);
+ u8 flags = da->da_dev->transport->transport_flags;
+
+ return snprintf(page, PAGE_SIZE, "%d\n",
+ flags & TRANSPORT_FLAG_PASSTHROUGH_ALUA ? 0 : 1);
+}
+
+static ssize_t pgr_support_show(struct config_item *item, char *page)
+{
+ struct se_dev_attrib *da = to_attrib(item);
+ u8 flags = da->da_dev->transport->transport_flags;
+
+ return snprintf(page, PAGE_SIZE, "%d\n",
+ flags & TRANSPORT_FLAG_PASSTHROUGH_PGR ? 0 : 1);
+}
+
CONFIGFS_ATTR(, emulate_model_alias);
CONFIGFS_ATTR(, emulate_dpo);
CONFIGFS_ATTR(, emulate_fua_write);
@@ -1116,6 +1134,8 @@
CONFIGFS_ATTR(, unmap_granularity_alignment);
CONFIGFS_ATTR(, unmap_zeroes_data);
CONFIGFS_ATTR(, max_write_same_len);
+CONFIGFS_ATTR_RO(, alua_support);
+CONFIGFS_ATTR_RO(, pgr_support);
/*
* dev_attrib attributes for devices using the target core SBC/SPC
@@ -1154,6 +1174,8 @@
&attr_unmap_granularity_alignment,
&attr_unmap_zeroes_data,
&attr_max_write_same_len,
+ &attr_alua_support,
+ &attr_pgr_support,
NULL,
};
EXPORT_SYMBOL(sbc_attrib_attrs);
@@ -1168,6 +1190,8 @@
&attr_hw_block_size,
&attr_hw_max_sectors,
&attr_hw_queue_depth,
+ &attr_alua_support,
+ &attr_pgr_support,
NULL,
};
EXPORT_SYMBOL(passthrough_attrib_attrs);
@@ -2236,7 +2260,11 @@
target_free_device(dev);
}
-static struct configfs_item_operations target_core_dev_item_ops = {
+/*
+ * Used in target_core_fabric_configfs.c to verify valid se_device symlink
+ * within target_fabric_port_link()
+ */
+struct configfs_item_operations target_core_dev_item_ops = {
.release = target_core_dev_release,
};
diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c
index 8add07f38..e8dd6da 100644
--- a/drivers/target/target_core_device.c
+++ b/drivers/target/target_core_device.c
@@ -49,8 +49,9 @@
#include "target_core_pr.h"
#include "target_core_ua.h"
-DEFINE_MUTEX(g_device_mutex);
-LIST_HEAD(g_device_list);
+static DEFINE_MUTEX(device_mutex);
+static LIST_HEAD(device_list);
+static DEFINE_IDR(devices_idr);
static struct se_hba *lun0_hba;
/* not static, needed by tpg.c */
@@ -168,11 +169,20 @@
rcu_read_lock();
deve = target_nacl_find_deve(nacl, unpacked_lun);
if (deve) {
- se_cmd->se_lun = rcu_dereference(deve->se_lun);
se_lun = rcu_dereference(deve->se_lun);
+
+ if (!percpu_ref_tryget_live(&se_lun->lun_ref)) {
+ se_lun = NULL;
+ goto out_unlock;
+ }
+
+ se_cmd->se_lun = rcu_dereference(deve->se_lun);
se_cmd->pr_res_key = deve->pr_res_key;
se_cmd->orig_fe_lun = unpacked_lun;
+ se_cmd->se_cmd_flags |= SCF_SE_LUN_CMD;
+ se_cmd->lun_ref_active = true;
}
+out_unlock:
rcu_read_unlock();
if (!se_lun) {
@@ -182,9 +192,6 @@
unpacked_lun);
return -ENODEV;
}
- /*
- * XXX: Add percpu se_lun->lun_ref reference count for TMR
- */
se_cmd->se_dev = rcu_dereference_raw(se_lun->lun_se_dev);
se_tmr->tmr_dev = rcu_dereference_raw(se_lun->lun_se_dev);
@@ -756,19 +763,16 @@
if (!dev)
return NULL;
- dev->dev_link_magic = SE_DEV_LINK_MAGIC;
dev->se_hba = hba;
dev->transport = hba->backend->ops;
dev->prot_length = sizeof(struct t10_pi_tuple);
dev->hba_index = hba->hba_index;
- INIT_LIST_HEAD(&dev->dev_list);
INIT_LIST_HEAD(&dev->dev_sep_list);
INIT_LIST_HEAD(&dev->dev_tmr_list);
INIT_LIST_HEAD(&dev->delayed_cmd_list);
INIT_LIST_HEAD(&dev->state_list);
INIT_LIST_HEAD(&dev->qf_cmd_list);
- INIT_LIST_HEAD(&dev->g_dev_node);
spin_lock_init(&dev->execute_task_lock);
spin_lock_init(&dev->delayed_cmd_lock);
spin_lock_init(&dev->dev_reservation_lock);
@@ -851,7 +855,7 @@
attrib->unmap_granularity = q->limits.discard_granularity / block_size;
attrib->unmap_granularity_alignment = q->limits.discard_alignment /
block_size;
- attrib->unmap_zeroes_data = 0;
+ attrib->unmap_zeroes_data = (q->limits.max_write_zeroes_sectors);
return true;
}
EXPORT_SYMBOL(target_configure_unmap_from_queue);
@@ -875,10 +879,79 @@
}
EXPORT_SYMBOL(target_to_linux_sector);
+/**
+ * target_find_device - find a se_device by its dev_index
+ * @id: dev_index
+ * @do_depend: true if caller needs target_depend_item to be done
+ *
+ * If do_depend is true, the caller must do a target_undepend_item
+ * when finished using the device.
+ *
+ * If do_depend is false, the caller must be called in a configfs
+ * callback or during removal.
+ */
+struct se_device *target_find_device(int id, bool do_depend)
+{
+ struct se_device *dev;
+
+ mutex_lock(&device_mutex);
+ dev = idr_find(&devices_idr, id);
+ if (dev && do_depend && target_depend_item(&dev->dev_group.cg_item))
+ dev = NULL;
+ mutex_unlock(&device_mutex);
+ return dev;
+}
+EXPORT_SYMBOL(target_find_device);
+
+struct devices_idr_iter {
+ int (*fn)(struct se_device *dev, void *data);
+ void *data;
+};
+
+static int target_devices_idr_iter(int id, void *p, void *data)
+{
+ struct devices_idr_iter *iter = data;
+ struct se_device *dev = p;
+
+ /*
+ * We add the device early to the idr, so it can be used
+ * by backend modules during configuration. We do not want
+ * to allow other callers to access partially setup devices,
+ * so we skip them here.
+ */
+ if (!(dev->dev_flags & DF_CONFIGURED))
+ return 0;
+
+ return iter->fn(dev, iter->data);
+}
+
+/**
+ * target_for_each_device - iterate over configured devices
+ * @fn: iterator function
+ * @data: pointer to data that will be passed to fn
+ *
+ * fn must return 0 to continue looping over devices. non-zero will break
+ * from the loop and return that value to the caller.
+ */
+int target_for_each_device(int (*fn)(struct se_device *dev, void *data),
+ void *data)
+{
+ struct devices_idr_iter iter;
+ int ret;
+
+ iter.fn = fn;
+ iter.data = data;
+
+ mutex_lock(&device_mutex);
+ ret = idr_for_each(&devices_idr, target_devices_idr_iter, &iter);
+ mutex_unlock(&device_mutex);
+ return ret;
+}
+
int target_configure_device(struct se_device *dev)
{
struct se_hba *hba = dev->se_hba;
- int ret;
+ int ret, id;
if (dev->dev_flags & DF_CONFIGURED) {
pr_err("se_dev->se_dev_ptr already set for storage"
@@ -886,9 +959,26 @@
return -EEXIST;
}
+ /*
+ * Add early so modules like tcmu can use during its
+ * configuration.
+ */
+ mutex_lock(&device_mutex);
+ /*
+ * Use cyclic to try and avoid collisions with devices
+ * that were recently removed.
+ */
+ id = idr_alloc_cyclic(&devices_idr, dev, 0, INT_MAX, GFP_KERNEL);
+ mutex_unlock(&device_mutex);
+ if (id < 0) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ dev->dev_index = id;
+
ret = dev->transport->configure_device(dev);
if (ret)
- goto out;
+ goto out_free_index;
/*
* XXX: there is not much point to have two different values here..
*/
@@ -903,12 +993,11 @@
dev->dev_attrib.hw_block_size);
dev->dev_attrib.optimal_sectors = dev->dev_attrib.hw_max_sectors;
- dev->dev_index = scsi_get_new_index(SCSI_DEVICE_INDEX);
dev->creation_time = get_jiffies_64();
ret = core_setup_alua(dev);
if (ret)
- goto out;
+ goto out_free_index;
/*
* Startup the struct se_device processing thread
@@ -946,16 +1035,16 @@
hba->dev_count++;
spin_unlock(&hba->device_lock);
- mutex_lock(&g_device_mutex);
- list_add_tail(&dev->g_dev_node, &g_device_list);
- mutex_unlock(&g_device_mutex);
-
dev->dev_flags |= DF_CONFIGURED;
return 0;
out_free_alua:
core_alua_free_lu_gp_mem(dev);
+out_free_index:
+ mutex_lock(&device_mutex);
+ idr_remove(&devices_idr, dev->dev_index);
+ mutex_unlock(&device_mutex);
out:
se_release_vpd_for_dev(dev);
return ret;
@@ -970,9 +1059,11 @@
if (dev->dev_flags & DF_CONFIGURED) {
destroy_workqueue(dev->tmr_wq);
- mutex_lock(&g_device_mutex);
- list_del(&dev->g_dev_node);
- mutex_unlock(&g_device_mutex);
+ dev->transport->destroy_device(dev);
+
+ mutex_lock(&device_mutex);
+ idr_remove(&devices_idr, dev->dev_index);
+ mutex_unlock(&device_mutex);
spin_lock(&hba->device_lock);
hba->dev_count--;
@@ -1087,19 +1178,19 @@
TRANSPORT_FLAG_PASSTHROUGH_PGR)) {
if (cdb[0] == PERSISTENT_RESERVE_IN) {
cmd->execute_cmd = target_scsi3_emulate_pr_in;
- size = (cdb[7] << 8) + cdb[8];
+ size = get_unaligned_be16(&cdb[7]);
return target_cmd_size_check(cmd, size);
}
if (cdb[0] == PERSISTENT_RESERVE_OUT) {
cmd->execute_cmd = target_scsi3_emulate_pr_out;
- size = (cdb[7] << 8) + cdb[8];
+ size = get_unaligned_be32(&cdb[5]);
return target_cmd_size_check(cmd, size);
}
if (cdb[0] == RELEASE || cdb[0] == RELEASE_10) {
cmd->execute_cmd = target_scsi2_reservation_release;
if (cdb[0] == RELEASE_10)
- size = (cdb[7] << 8) | cdb[8];
+ size = get_unaligned_be16(&cdb[7]);
else
size = cmd->data_length;
return target_cmd_size_check(cmd, size);
@@ -1107,7 +1198,7 @@
if (cdb[0] == RESERVE || cdb[0] == RESERVE_10) {
cmd->execute_cmd = target_scsi2_reservation_reserve;
if (cdb[0] == RESERVE_10)
- size = (cdb[7] << 8) | cdb[8];
+ size = get_unaligned_be16(&cdb[7]);
else
size = cmd->data_length;
return target_cmd_size_check(cmd, size);
@@ -1126,7 +1217,7 @@
case WRITE_16:
case WRITE_VERIFY:
case WRITE_VERIFY_12:
- case 0x8e: /* WRITE_VERIFY_16 */
+ case WRITE_VERIFY_16:
case COMPARE_AND_WRITE:
case XDWRITEREAD_10:
cmd->se_cmd_flags |= SCF_SCSI_DATA_CDB;
@@ -1135,7 +1226,7 @@
switch (get_unaligned_be16(&cdb[8])) {
case READ_32:
case WRITE_32:
- case 0x0c: /* WRITE_VERIFY_32 */
+ case WRITE_VERIFY_32:
case XDWRITEREAD_32:
cmd->se_cmd_flags |= SCF_SCSI_DATA_CDB;
break;
diff --git a/drivers/target/target_core_fabric_configfs.c b/drivers/target/target_core_fabric_configfs.c
index d1e6cab..e9e917c 100644
--- a/drivers/target/target_core_fabric_configfs.c
+++ b/drivers/target/target_core_fabric_configfs.c
@@ -65,6 +65,8 @@
pr_debug("Setup generic %s\n", __stringify(_name)); \
}
+static struct configfs_item_operations target_fabric_port_item_ops;
+
/* Start of tfc_tpg_mappedlun_cit */
static int target_fabric_mappedlun_link(
@@ -72,19 +74,20 @@
struct config_item *lun_ci)
{
struct se_dev_entry *deve;
- struct se_lun *lun = container_of(to_config_group(lun_ci),
- struct se_lun, lun_group);
+ struct se_lun *lun;
struct se_lun_acl *lacl = container_of(to_config_group(lun_acl_ci),
struct se_lun_acl, se_lun_group);
struct se_portal_group *se_tpg;
struct config_item *nacl_ci, *tpg_ci, *tpg_ci_s, *wwn_ci, *wwn_ci_s;
bool lun_access_ro;
- if (lun->lun_link_magic != SE_LUN_LINK_MAGIC) {
- pr_err("Bad lun->lun_link_magic, not a valid lun_ci pointer:"
- " %p to struct lun: %p\n", lun_ci, lun);
+ if (!lun_ci->ci_type ||
+ lun_ci->ci_type->ct_item_ops != &target_fabric_port_item_ops) {
+ pr_err("Bad lun_ci, not a valid lun_ci pointer: %p\n", lun_ci);
return -EFAULT;
}
+ lun = container_of(to_config_group(lun_ci), struct se_lun, lun_group);
+
/*
* Ensure that the source port exists
*/
@@ -620,6 +623,8 @@
NULL,
};
+extern struct configfs_item_operations target_core_dev_item_ops;
+
static int target_fabric_port_link(
struct config_item *lun_ci,
struct config_item *se_dev_ci)
@@ -628,16 +633,16 @@
struct se_lun *lun = container_of(to_config_group(lun_ci),
struct se_lun, lun_group);
struct se_portal_group *se_tpg;
- struct se_device *dev =
- container_of(to_config_group(se_dev_ci), struct se_device, dev_group);
+ struct se_device *dev;
struct target_fabric_configfs *tf;
int ret;
- if (dev->dev_link_magic != SE_DEV_LINK_MAGIC) {
- pr_err("Bad dev->dev_link_magic, not a valid se_dev_ci pointer:"
- " %p to struct se_device: %p\n", se_dev_ci, dev);
+ if (!se_dev_ci->ci_type ||
+ se_dev_ci->ci_type->ct_item_ops != &target_core_dev_item_ops) {
+ pr_err("Bad se_dev_ci, not a valid se_dev_ci pointer: %p\n", se_dev_ci);
return -EFAULT;
}
+ dev = container_of(to_config_group(se_dev_ci), struct se_device, dev_group);
if (!(dev->dev_flags & DF_CONFIGURED)) {
pr_err("se_device not configured yet, cannot port link\n");
diff --git a/drivers/target/target_core_fabric_lib.c b/drivers/target/target_core_fabric_lib.c
index cb6497c..508da34 100644
--- a/drivers/target/target_core_fabric_lib.c
+++ b/drivers/target/target_core_fabric_lib.c
@@ -34,6 +34,7 @@
#include <linux/ctype.h>
#include <linux/spinlock.h>
#include <linux/export.h>
+#include <asm/unaligned.h>
#include <scsi/scsi_proto.h>
@@ -216,8 +217,7 @@
if (padding != 0)
len += padding;
- buf[2] = ((len >> 8) & 0xff);
- buf[3] = (len & 0xff);
+ put_unaligned_be16(len, &buf[2]);
/*
* Increment value for total payload + header length for
* full status descriptor
@@ -306,7 +306,7 @@
*/
if (out_tid_len) {
/* The shift works thanks to integer promotion rules */
- add_len = (buf[2] << 8) | buf[3];
+ add_len = get_unaligned_be16(&buf[2]);
tid_len = strlen(&buf[4]);
tid_len += 4; /* Add four bytes for iSCSI Transport ID header */
diff --git a/drivers/target/target_core_file.c b/drivers/target/target_core_file.c
index e921948..24cf11d 100644
--- a/drivers/target/target_core_file.c
+++ b/drivers/target/target_core_file.c
@@ -237,13 +237,17 @@
static void fd_free_device(struct se_device *dev)
{
+ call_rcu(&dev->rcu_head, fd_dev_call_rcu);
+}
+
+static void fd_destroy_device(struct se_device *dev)
+{
struct fd_dev *fd_dev = FD_DEV(dev);
if (fd_dev->fd_file) {
filp_close(fd_dev->fd_file, NULL);
fd_dev->fd_file = NULL;
}
- call_rcu(&dev->rcu_head, fd_dev_call_rcu);
}
static int fd_do_rw(struct se_cmd *cmd, struct file *fd,
@@ -826,6 +830,7 @@
.detach_hba = fd_detach_hba,
.alloc_device = fd_alloc_device,
.configure_device = fd_configure_device,
+ .destroy_device = fd_destroy_device,
.free_device = fd_free_device,
.parse_cdb = fd_parse_cdb,
.set_configfs_dev_params = fd_set_configfs_dev_params,
diff --git a/drivers/target/target_core_iblock.c b/drivers/target/target_core_iblock.c
index c05d3801..ee7c7fa 100644
--- a/drivers/target/target_core_iblock.c
+++ b/drivers/target/target_core_iblock.c
@@ -86,6 +86,7 @@
struct block_device *bd = NULL;
struct blk_integrity *bi;
fmode_t mode;
+ unsigned int max_write_zeroes_sectors;
int ret = -ENOMEM;
if (!(ib_dev->ibd_flags & IBDF_HAS_UDEV_PATH)) {
@@ -129,7 +130,11 @@
* Enable write same emulation for IBLOCK and use 0xFFFF as
* the smaller WRITE_SAME(10) only has a two-byte block count.
*/
- dev->dev_attrib.max_write_same_len = 0xFFFF;
+ max_write_zeroes_sectors = bdev_write_zeroes_sectors(bd);
+ if (max_write_zeroes_sectors)
+ dev->dev_attrib.max_write_same_len = max_write_zeroes_sectors;
+ else
+ dev->dev_attrib.max_write_same_len = 0xFFFF;
if (blk_queue_nonrot(q))
dev->dev_attrib.is_nonrot = 1;
@@ -185,14 +190,17 @@
static void iblock_free_device(struct se_device *dev)
{
+ call_rcu(&dev->rcu_head, iblock_dev_call_rcu);
+}
+
+static void iblock_destroy_device(struct se_device *dev)
+{
struct iblock_dev *ib_dev = IBLOCK_DEV(dev);
if (ib_dev->ibd_bd != NULL)
blkdev_put(ib_dev->ibd_bd, FMODE_WRITE|FMODE_READ|FMODE_EXCL);
if (ib_dev->ibd_bio_set != NULL)
bioset_free(ib_dev->ibd_bio_set);
-
- call_rcu(&dev->rcu_head, iblock_dev_call_rcu);
}
static unsigned long long iblock_emulate_read_cap_with_block_size(
@@ -415,28 +423,31 @@
}
static sense_reason_t
-iblock_execute_write_same_direct(struct block_device *bdev, struct se_cmd *cmd)
+iblock_execute_zero_out(struct block_device *bdev, struct se_cmd *cmd)
{
struct se_device *dev = cmd->se_dev;
struct scatterlist *sg = &cmd->t_data_sg[0];
- struct page *page = NULL;
- int ret;
+ unsigned char *buf, zero = 0x00, *p = &zero;
+ int rc, ret;
- if (sg->offset) {
- page = alloc_page(GFP_KERNEL);
- if (!page)
- return TCM_OUT_OF_RESOURCES;
- sg_copy_to_buffer(sg, cmd->t_data_nents, page_address(page),
- dev->dev_attrib.block_size);
- }
+ buf = kmap(sg_page(sg)) + sg->offset;
+ if (!buf)
+ return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
+ /*
+ * Fall back to block_execute_write_same() slow-path if
+ * incoming WRITE_SAME payload does not contain zeros.
+ */
+ rc = memcmp(buf, p, cmd->data_length);
+ kunmap(sg_page(sg));
- ret = blkdev_issue_write_same(bdev,
+ if (rc)
+ return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
+
+ ret = blkdev_issue_zeroout(bdev,
target_to_linux_sector(dev, cmd->t_task_lba),
target_to_linux_sector(dev,
sbc_get_write_same_sectors(cmd)),
- GFP_KERNEL, page ? page : sg_page(sg));
- if (page)
- __free_page(page);
+ GFP_KERNEL, false);
if (ret)
return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
@@ -472,8 +483,10 @@
return TCM_INVALID_CDB_FIELD;
}
- if (bdev_write_same(bdev))
- return iblock_execute_write_same_direct(bdev, cmd);
+ if (bdev_write_zeroes_sectors(bdev)) {
+ if (!iblock_execute_zero_out(bdev, cmd))
+ return 0;
+ }
ibr = kzalloc(sizeof(struct iblock_req), GFP_KERNEL);
if (!ibr)
@@ -848,6 +861,7 @@
.detach_hba = iblock_detach_hba,
.alloc_device = iblock_alloc_device,
.configure_device = iblock_configure_device,
+ .destroy_device = iblock_destroy_device,
.free_device = iblock_free_device,
.parse_cdb = iblock_parse_cdb,
.set_configfs_dev_params = iblock_set_configfs_dev_params,
diff --git a/drivers/target/target_core_internal.h b/drivers/target/target_core_internal.h
index 0912de7..f30e8ac 100644
--- a/drivers/target/target_core_internal.h
+++ b/drivers/target/target_core_internal.h
@@ -56,9 +56,6 @@
extern struct t10_alua_lu_gp *default_lu_gp;
/* target_core_device.c */
-extern struct mutex g_device_mutex;
-extern struct list_head g_device_list;
-
int core_alloc_rtpi(struct se_lun *lun, struct se_device *dev);
struct se_dev_entry *core_get_se_deve_from_rtpi(struct se_node_acl *, u16);
void target_pr_kref_release(struct kref *);
@@ -87,6 +84,8 @@
struct se_device *target_alloc_device(struct se_hba *hba, const char *name);
int target_configure_device(struct se_device *dev);
void target_free_device(struct se_device *);
+int target_for_each_device(int (*fn)(struct se_device *dev, void *data),
+ void *data);
/* target_core_configfs.c */
void target_setup_backend_cits(struct target_backend *);
diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c
index 129ca57..6d5def6 100644
--- a/drivers/target/target_core_pr.c
+++ b/drivers/target/target_core_pr.c
@@ -1562,10 +1562,7 @@
* first extract TransportID Parameter Data Length, and make sure
* the value matches up to the SCSI expected data transfer length.
*/
- tpdl = (buf[24] & 0xff) << 24;
- tpdl |= (buf[25] & 0xff) << 16;
- tpdl |= (buf[26] & 0xff) << 8;
- tpdl |= buf[27] & 0xff;
+ tpdl = get_unaligned_be32(&buf[24]);
if ((tpdl + 28) != cmd->data_length) {
pr_err("SPC-3 PR: Illegal tpdl: %u + 28 byte header"
@@ -3221,12 +3218,8 @@
goto out_put_pr_reg;
}
- rtpi = (buf[18] & 0xff) << 8;
- rtpi |= buf[19] & 0xff;
- tid_len = (buf[20] & 0xff) << 24;
- tid_len |= (buf[21] & 0xff) << 16;
- tid_len |= (buf[22] & 0xff) << 8;
- tid_len |= buf[23] & 0xff;
+ rtpi = get_unaligned_be16(&buf[18]);
+ tid_len = get_unaligned_be32(&buf[20]);
transport_kunmap_data_sg(cmd);
buf = NULL;
@@ -3552,16 +3545,6 @@
return ret;
}
-static unsigned long long core_scsi3_extract_reservation_key(unsigned char *cdb)
-{
- unsigned int __v1, __v2;
-
- __v1 = (cdb[0] << 24) | (cdb[1] << 16) | (cdb[2] << 8) | cdb[3];
- __v2 = (cdb[4] << 24) | (cdb[5] << 16) | (cdb[6] << 8) | cdb[7];
-
- return ((unsigned long long)__v2) | (unsigned long long)__v1 << 32;
-}
-
/*
* See spc4r17 section 6.14 Table 170
*/
@@ -3602,7 +3585,7 @@
if (cmd->data_length < 24) {
pr_warn("SPC-PR: Received PR OUT parameter list"
" length too small: %u\n", cmd->data_length);
- return TCM_INVALID_PARAMETER_LIST;
+ return TCM_PARAMETER_LIST_LENGTH_ERROR;
}
/*
@@ -3619,8 +3602,8 @@
/*
* From PERSISTENT_RESERVE_OUT parameter list (payload)
*/
- res_key = core_scsi3_extract_reservation_key(&buf[0]);
- sa_res_key = core_scsi3_extract_reservation_key(&buf[8]);
+ res_key = get_unaligned_be64(&buf[0]);
+ sa_res_key = get_unaligned_be64(&buf[8]);
/*
* REGISTER_AND_MOVE uses a different SA parameter list containing
* SCSI TransportIDs.
@@ -3646,7 +3629,7 @@
/*
* SPEC_I_PT=1 is only valid for Service action: REGISTER
*/
- if (spec_i_pt && ((cdb[1] & 0x1f) != PRO_REGISTER))
+ if (spec_i_pt && (sa != PRO_REGISTER))
return TCM_INVALID_PARAMETER_LIST;
/*
@@ -3658,11 +3641,11 @@
* the sense key set to ILLEGAL REQUEST, and the additional sense
* code set to PARAMETER LIST LENGTH ERROR.
*/
- if (!spec_i_pt && ((cdb[1] & 0x1f) != PRO_REGISTER_AND_MOVE) &&
+ if (!spec_i_pt && (sa != PRO_REGISTER_AND_MOVE) &&
(cmd->data_length != 24)) {
pr_warn("SPC-PR: Received PR OUT illegal parameter"
" list length: %u\n", cmd->data_length);
- return TCM_INVALID_PARAMETER_LIST;
+ return TCM_PARAMETER_LIST_LENGTH_ERROR;
}
/*
@@ -3702,7 +3685,7 @@
break;
default:
pr_err("Unknown PERSISTENT_RESERVE_OUT service"
- " action: 0x%02x\n", cdb[1] & 0x1f);
+ " action: 0x%02x\n", sa);
return TCM_INVALID_CDB_FIELD;
}
@@ -3734,10 +3717,7 @@
if (!buf)
return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
- buf[0] = ((dev->t10_pr.pr_generation >> 24) & 0xff);
- buf[1] = ((dev->t10_pr.pr_generation >> 16) & 0xff);
- buf[2] = ((dev->t10_pr.pr_generation >> 8) & 0xff);
- buf[3] = (dev->t10_pr.pr_generation & 0xff);
+ put_unaligned_be32(dev->t10_pr.pr_generation, buf);
spin_lock(&dev->t10_pr.registration_lock);
list_for_each_entry(pr_reg, &dev->t10_pr.registration_list,
@@ -3749,23 +3729,13 @@
if ((add_len + 8) > (cmd->data_length - 8))
break;
- buf[off++] = ((pr_reg->pr_res_key >> 56) & 0xff);
- buf[off++] = ((pr_reg->pr_res_key >> 48) & 0xff);
- buf[off++] = ((pr_reg->pr_res_key >> 40) & 0xff);
- buf[off++] = ((pr_reg->pr_res_key >> 32) & 0xff);
- buf[off++] = ((pr_reg->pr_res_key >> 24) & 0xff);
- buf[off++] = ((pr_reg->pr_res_key >> 16) & 0xff);
- buf[off++] = ((pr_reg->pr_res_key >> 8) & 0xff);
- buf[off++] = (pr_reg->pr_res_key & 0xff);
-
+ put_unaligned_be64(pr_reg->pr_res_key, &buf[off]);
+ off += 8;
add_len += 8;
}
spin_unlock(&dev->t10_pr.registration_lock);
- buf[4] = ((add_len >> 24) & 0xff);
- buf[5] = ((add_len >> 16) & 0xff);
- buf[6] = ((add_len >> 8) & 0xff);
- buf[7] = (add_len & 0xff);
+ put_unaligned_be32(add_len, &buf[4]);
transport_kunmap_data_sg(cmd);
@@ -3796,10 +3766,7 @@
if (!buf)
return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
- buf[0] = ((dev->t10_pr.pr_generation >> 24) & 0xff);
- buf[1] = ((dev->t10_pr.pr_generation >> 16) & 0xff);
- buf[2] = ((dev->t10_pr.pr_generation >> 8) & 0xff);
- buf[3] = (dev->t10_pr.pr_generation & 0xff);
+ put_unaligned_be32(dev->t10_pr.pr_generation, &buf[0]);
spin_lock(&dev->dev_reservation_lock);
pr_reg = dev->dev_pr_res_holder;
@@ -3807,10 +3774,7 @@
/*
* Set the hardcoded Additional Length
*/
- buf[4] = ((add_len >> 24) & 0xff);
- buf[5] = ((add_len >> 16) & 0xff);
- buf[6] = ((add_len >> 8) & 0xff);
- buf[7] = (add_len & 0xff);
+ put_unaligned_be32(add_len, &buf[4]);
if (cmd->data_length < 22)
goto err;
@@ -3837,14 +3801,7 @@
else
pr_res_key = pr_reg->pr_res_key;
- buf[8] = ((pr_res_key >> 56) & 0xff);
- buf[9] = ((pr_res_key >> 48) & 0xff);
- buf[10] = ((pr_res_key >> 40) & 0xff);
- buf[11] = ((pr_res_key >> 32) & 0xff);
- buf[12] = ((pr_res_key >> 24) & 0xff);
- buf[13] = ((pr_res_key >> 16) & 0xff);
- buf[14] = ((pr_res_key >> 8) & 0xff);
- buf[15] = (pr_res_key & 0xff);
+ put_unaligned_be64(pr_res_key, &buf[8]);
/*
* Set the SCOPE and TYPE
*/
@@ -3882,8 +3839,7 @@
if (!buf)
return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
- buf[0] = ((add_len >> 8) & 0xff);
- buf[1] = (add_len & 0xff);
+ put_unaligned_be16(add_len, &buf[0]);
buf[2] |= 0x10; /* CRH: Compatible Reservation Hanlding bit. */
buf[2] |= 0x08; /* SIP_C: Specify Initiator Ports Capable bit */
buf[2] |= 0x04; /* ATP_C: All Target Ports Capable bit */
@@ -3947,10 +3903,7 @@
if (!buf)
return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
- buf[0] = ((dev->t10_pr.pr_generation >> 24) & 0xff);
- buf[1] = ((dev->t10_pr.pr_generation >> 16) & 0xff);
- buf[2] = ((dev->t10_pr.pr_generation >> 8) & 0xff);
- buf[3] = (dev->t10_pr.pr_generation & 0xff);
+ put_unaligned_be32(dev->t10_pr.pr_generation, &buf[0]);
spin_lock(&dev->dev_reservation_lock);
if (dev->dev_pr_res_holder) {
@@ -3992,14 +3945,8 @@
/*
* Set RESERVATION KEY
*/
- buf[off++] = ((pr_reg->pr_res_key >> 56) & 0xff);
- buf[off++] = ((pr_reg->pr_res_key >> 48) & 0xff);
- buf[off++] = ((pr_reg->pr_res_key >> 40) & 0xff);
- buf[off++] = ((pr_reg->pr_res_key >> 32) & 0xff);
- buf[off++] = ((pr_reg->pr_res_key >> 24) & 0xff);
- buf[off++] = ((pr_reg->pr_res_key >> 16) & 0xff);
- buf[off++] = ((pr_reg->pr_res_key >> 8) & 0xff);
- buf[off++] = (pr_reg->pr_res_key & 0xff);
+ put_unaligned_be64(pr_reg->pr_res_key, &buf[off]);
+ off += 8;
off += 4; /* Skip Over Reserved area */
/*
@@ -4041,8 +3988,8 @@
if (!pr_reg->pr_reg_all_tg_pt) {
u16 sep_rtpi = pr_reg->tg_pt_sep_rtpi;
- buf[off++] = ((sep_rtpi >> 8) & 0xff);
- buf[off++] = (sep_rtpi & 0xff);
+ put_unaligned_be16(sep_rtpi, &buf[off]);
+ off += 2;
} else
off += 2; /* Skip over RELATIVE TARGET PORT IDENTIFIER */
@@ -4062,10 +4009,7 @@
/*
* Set the ADDITIONAL DESCRIPTOR LENGTH
*/
- buf[off++] = ((desc_len >> 24) & 0xff);
- buf[off++] = ((desc_len >> 16) & 0xff);
- buf[off++] = ((desc_len >> 8) & 0xff);
- buf[off++] = (desc_len & 0xff);
+ put_unaligned_be32(desc_len, &buf[off]);
/*
* Size of full desctipor header minus TransportID
* containing $FABRIC_MOD specific) initiator device/port
@@ -4082,10 +4026,7 @@
/*
* Set ADDITIONAL_LENGTH
*/
- buf[4] = ((add_len >> 24) & 0xff);
- buf[5] = ((add_len >> 16) & 0xff);
- buf[6] = ((add_len >> 8) & 0xff);
- buf[7] = (add_len & 0xff);
+ put_unaligned_be32(add_len, &buf[4]);
transport_kunmap_data_sg(cmd);
diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c
index ceec021..7c69b4a 100644
--- a/drivers/target/target_core_pscsi.c
+++ b/drivers/target/target_core_pscsi.c
@@ -168,7 +168,7 @@
/*
* If MODE_SENSE still returns zero, set the default value to 1024.
*/
- sdev->sector_size = (buf[9] << 16) | (buf[10] << 8) | (buf[11]);
+ sdev->sector_size = get_unaligned_be24(&buf[9]);
out_free:
if (!sdev->sector_size)
sdev->sector_size = 1024;
@@ -209,8 +209,7 @@
cdb[0] = INQUIRY;
cdb[1] = 0x01; /* Query VPD */
cdb[2] = 0x80; /* Unit Serial Number */
- cdb[3] = (INQUIRY_VPD_SERIAL_LEN >> 8) & 0xff;
- cdb[4] = (INQUIRY_VPD_SERIAL_LEN & 0xff);
+ put_unaligned_be16(INQUIRY_VPD_SERIAL_LEN, &cdb[3]);
ret = scsi_execute_req(sdev, cdb, DMA_FROM_DEVICE, buf,
INQUIRY_VPD_SERIAL_LEN, NULL, HZ, 1, NULL);
@@ -245,8 +244,7 @@
cdb[0] = INQUIRY;
cdb[1] = 0x01; /* Query VPD */
cdb[2] = 0x83; /* Device Identifier */
- cdb[3] = (INQUIRY_VPD_DEVICE_IDENTIFIER_LEN >> 8) & 0xff;
- cdb[4] = (INQUIRY_VPD_DEVICE_IDENTIFIER_LEN & 0xff);
+ put_unaligned_be16(INQUIRY_VPD_DEVICE_IDENTIFIER_LEN, &cdb[3]);
ret = scsi_execute_req(sdev, cdb, DMA_FROM_DEVICE, buf,
INQUIRY_VPD_DEVICE_IDENTIFIER_LEN,
@@ -254,7 +252,7 @@
if (ret)
goto out;
- page_len = (buf[2] << 8) | buf[3];
+ page_len = get_unaligned_be16(&buf[2]);
while (page_len > 0) {
/* Grab a pointer to the Identification descriptor */
page_83 = &buf[off];
@@ -384,7 +382,7 @@
spin_unlock_irq(sh->host_lock);
/*
* Claim exclusive struct block_device access to struct scsi_device
- * for TYPE_DISK using supplied udev_path
+ * for TYPE_DISK and TYPE_ZBC using supplied udev_path
*/
bd = blkdev_get_by_path(dev->udev_path,
FMODE_WRITE|FMODE_READ|FMODE_EXCL, pdv);
@@ -402,8 +400,9 @@
return ret;
}
- pr_debug("CORE_PSCSI[%d] - Added TYPE_DISK for %d:%d:%d:%llu\n",
- phv->phv_host_id, sh->host_no, sd->channel, sd->id, sd->lun);
+ pr_debug("CORE_PSCSI[%d] - Added TYPE_%s for %d:%d:%d:%llu\n",
+ phv->phv_host_id, sd->type == TYPE_DISK ? "DISK" : "ZBC",
+ sh->host_no, sd->channel, sd->id, sd->lun);
return 0;
}
@@ -522,6 +521,7 @@
*/
switch (sd->type) {
case TYPE_DISK:
+ case TYPE_ZBC:
ret = pscsi_create_type_disk(dev, sd);
break;
default:
@@ -566,6 +566,11 @@
static void pscsi_free_device(struct se_device *dev)
{
+ call_rcu(&dev->rcu_head, pscsi_dev_call_rcu);
+}
+
+static void pscsi_destroy_device(struct se_device *dev)
+{
struct pscsi_dev_virt *pdv = PSCSI_DEV(dev);
struct pscsi_hba_virt *phv = dev->se_hba->hba_ptr;
struct scsi_device *sd = pdv->pdv_sd;
@@ -573,9 +578,11 @@
if (sd) {
/*
* Release exclusive pSCSI internal struct block_device claim for
- * struct scsi_device with TYPE_DISK from pscsi_create_type_disk()
+ * struct scsi_device with TYPE_DISK or TYPE_ZBC
+ * from pscsi_create_type_disk()
*/
- if ((sd->type == TYPE_DISK) && pdv->pdv_bd) {
+ if ((sd->type == TYPE_DISK || sd->type == TYPE_ZBC) &&
+ pdv->pdv_bd) {
blkdev_put(pdv->pdv_bd,
FMODE_WRITE|FMODE_READ|FMODE_EXCL);
pdv->pdv_bd = NULL;
@@ -594,15 +601,13 @@
pdv->pdv_sd = NULL;
}
- call_rcu(&dev->rcu_head, pscsi_dev_call_rcu);
}
-static void pscsi_transport_complete(struct se_cmd *cmd, struct scatterlist *sg,
- unsigned char *sense_buffer)
+static void pscsi_complete_cmd(struct se_cmd *cmd, u8 scsi_status,
+ unsigned char *req_sense)
{
struct pscsi_dev_virt *pdv = PSCSI_DEV(cmd->se_dev);
struct scsi_device *sd = pdv->pdv_sd;
- int result;
struct pscsi_plugin_task *pt = cmd->priv;
unsigned char *cdb;
/*
@@ -613,7 +618,6 @@
return;
cdb = &pt->pscsi_cdb[0];
- result = pt->pscsi_result;
/*
* Hack to make sure that Write-Protect modepage is set if R/O mode is
* forced.
@@ -622,7 +626,7 @@
goto after_mode_sense;
if (((cdb[0] == MODE_SENSE) || (cdb[0] == MODE_SENSE_10)) &&
- (status_byte(result) << 1) == SAM_STAT_GOOD) {
+ scsi_status == SAM_STAT_GOOD) {
bool read_only = target_lun_is_rdonly(cmd);
if (read_only) {
@@ -657,40 +661,36 @@
* storage engine.
*/
if (((cdb[0] == MODE_SELECT) || (cdb[0] == MODE_SELECT_10)) &&
- (status_byte(result) << 1) == SAM_STAT_GOOD) {
+ scsi_status == SAM_STAT_GOOD) {
unsigned char *buf;
u16 bdl;
u32 blocksize;
- buf = sg_virt(&sg[0]);
+ buf = sg_virt(&cmd->t_data_sg[0]);
if (!buf) {
pr_err("Unable to get buf for scatterlist\n");
goto after_mode_select;
}
if (cdb[0] == MODE_SELECT)
- bdl = (buf[3]);
+ bdl = buf[3];
else
- bdl = (buf[6] << 8) | (buf[7]);
+ bdl = get_unaligned_be16(&buf[6]);
if (!bdl)
goto after_mode_select;
if (cdb[0] == MODE_SELECT)
- blocksize = (buf[9] << 16) | (buf[10] << 8) |
- (buf[11]);
+ blocksize = get_unaligned_be24(&buf[9]);
else
- blocksize = (buf[13] << 16) | (buf[14] << 8) |
- (buf[15]);
+ blocksize = get_unaligned_be24(&buf[13]);
sd->sector_size = blocksize;
}
after_mode_select:
- if (sense_buffer && (status_byte(result) & CHECK_CONDITION)) {
- memcpy(sense_buffer, pt->pscsi_sense, TRANSPORT_SENSE_BUFFER);
- cmd->se_cmd_flags |= SCF_TRANSPORT_TASK_SENSE;
- }
+ if (scsi_status == SAM_STAT_CHECK_CONDITION)
+ transport_copy_sense_to_cmd(cmd, req_sense);
}
enum {
@@ -1002,7 +1002,8 @@
req->end_io_data = cmd;
scsi_req(req)->cmd_len = scsi_command_size(pt->pscsi_cdb);
scsi_req(req)->cmd = &pt->pscsi_cdb[0];
- if (pdv->pdv_sd->type == TYPE_DISK)
+ if (pdv->pdv_sd->type == TYPE_DISK ||
+ pdv->pdv_sd->type == TYPE_ZBC)
req->timeout = PS_TIMEOUT_DISK;
else
req->timeout = PS_TIMEOUT_OTHER;
@@ -1047,30 +1048,29 @@
{
struct se_cmd *cmd = req->end_io_data;
struct pscsi_plugin_task *pt = cmd->priv;
+ int result = scsi_req(req)->result;
+ u8 scsi_status = status_byte(result) << 1;
- pt->pscsi_result = scsi_req(req)->result;
- pt->pscsi_resid = scsi_req(req)->resid_len;
-
- cmd->scsi_status = status_byte(pt->pscsi_result) << 1;
- if (cmd->scsi_status) {
+ if (scsi_status) {
pr_debug("PSCSI Status Byte exception at cmd: %p CDB:"
" 0x%02x Result: 0x%08x\n", cmd, pt->pscsi_cdb[0],
- pt->pscsi_result);
+ result);
}
- switch (host_byte(pt->pscsi_result)) {
+ pscsi_complete_cmd(cmd, scsi_status, scsi_req(req)->sense);
+
+ switch (host_byte(result)) {
case DID_OK:
- target_complete_cmd(cmd, cmd->scsi_status);
+ target_complete_cmd(cmd, scsi_status);
break;
default:
pr_debug("PSCSI Host Byte exception at cmd: %p CDB:"
" 0x%02x Result: 0x%08x\n", cmd, pt->pscsi_cdb[0],
- pt->pscsi_result);
+ result);
target_complete_cmd(cmd, SAM_STAT_CHECK_CONDITION);
break;
}
- memcpy(pt->pscsi_sense, scsi_req(req)->sense, TRANSPORT_SENSE_BUFFER);
__blk_put_request(req->q, req);
kfree(pt);
}
@@ -1086,8 +1086,8 @@
.pmode_enable_hba = pscsi_pmode_enable_hba,
.alloc_device = pscsi_alloc_device,
.configure_device = pscsi_configure_device,
+ .destroy_device = pscsi_destroy_device,
.free_device = pscsi_free_device,
- .transport_complete = pscsi_transport_complete,
.parse_cdb = pscsi_parse_cdb,
.set_configfs_dev_params = pscsi_set_configfs_dev_params,
.show_configfs_dev_params = pscsi_show_configfs_dev_params,
diff --git a/drivers/target/target_core_pscsi.h b/drivers/target/target_core_pscsi.h
index 8a02fa4..b86fb0e 100644
--- a/drivers/target/target_core_pscsi.h
+++ b/drivers/target/target_core_pscsi.h
@@ -23,10 +23,6 @@
struct Scsi_Host;
struct pscsi_plugin_task {
- unsigned char pscsi_sense[TRANSPORT_SENSE_BUFFER];
- int pscsi_direction;
- int pscsi_result;
- u32 pscsi_resid;
unsigned char pscsi_cdb[0];
} ____cacheline_aligned;
diff --git a/drivers/target/target_core_rd.c b/drivers/target/target_core_rd.c
index 20253d0..a6e8106 100644
--- a/drivers/target/target_core_rd.c
+++ b/drivers/target/target_core_rd.c
@@ -339,10 +339,14 @@
static void rd_free_device(struct se_device *dev)
{
+ call_rcu(&dev->rcu_head, rd_dev_call_rcu);
+}
+
+static void rd_destroy_device(struct se_device *dev)
+{
struct rd_dev *rd_dev = RD_DEV(dev);
rd_release_device_space(rd_dev);
- call_rcu(&dev->rcu_head, rd_dev_call_rcu);
}
static struct rd_dev_sg_table *rd_get_sg_table(struct rd_dev *rd_dev, u32 page)
@@ -554,7 +558,7 @@
struct rd_dev *rd_dev = RD_DEV(dev);
char *orig, *ptr, *opts;
substring_t args[MAX_OPT_ARGS];
- int ret = 0, arg, token;
+ int arg, token;
opts = kstrdup(page, GFP_KERNEL);
if (!opts)
@@ -589,7 +593,7 @@
}
kfree(orig);
- return (!ret) ? count : ret;
+ return count;
}
static ssize_t rd_show_configfs_dev_params(struct se_device *dev, char *b)
@@ -651,6 +655,7 @@
.detach_hba = rd_detach_hba,
.alloc_device = rd_alloc_device,
.configure_device = rd_configure_device,
+ .destroy_device = rd_destroy_device,
.free_device = rd_free_device,
.parse_cdb = rd_parse_cdb,
.set_configfs_dev_params = rd_set_configfs_dev_params,
diff --git a/drivers/target/target_core_sbc.c b/drivers/target/target_core_sbc.c
index dc9456e..750a04e 100644
--- a/drivers/target/target_core_sbc.c
+++ b/drivers/target/target_core_sbc.c
@@ -71,14 +71,8 @@
else
blocks = (u32)blocks_long;
- buf[0] = (blocks >> 24) & 0xff;
- buf[1] = (blocks >> 16) & 0xff;
- buf[2] = (blocks >> 8) & 0xff;
- buf[3] = blocks & 0xff;
- buf[4] = (dev->dev_attrib.block_size >> 24) & 0xff;
- buf[5] = (dev->dev_attrib.block_size >> 16) & 0xff;
- buf[6] = (dev->dev_attrib.block_size >> 8) & 0xff;
- buf[7] = dev->dev_attrib.block_size & 0xff;
+ put_unaligned_be32(blocks, &buf[0]);
+ put_unaligned_be32(dev->dev_attrib.block_size, &buf[4]);
rbuf = transport_kmap_data_sg(cmd);
if (rbuf) {
@@ -102,18 +96,8 @@
unsigned long long blocks = dev->transport->get_blocks(dev);
memset(buf, 0, sizeof(buf));
- buf[0] = (blocks >> 56) & 0xff;
- buf[1] = (blocks >> 48) & 0xff;
- buf[2] = (blocks >> 40) & 0xff;
- buf[3] = (blocks >> 32) & 0xff;
- buf[4] = (blocks >> 24) & 0xff;
- buf[5] = (blocks >> 16) & 0xff;
- buf[6] = (blocks >> 8) & 0xff;
- buf[7] = blocks & 0xff;
- buf[8] = (dev->dev_attrib.block_size >> 24) & 0xff;
- buf[9] = (dev->dev_attrib.block_size >> 16) & 0xff;
- buf[10] = (dev->dev_attrib.block_size >> 8) & 0xff;
- buf[11] = dev->dev_attrib.block_size & 0xff;
+ put_unaligned_be64(blocks, &buf[0]);
+ put_unaligned_be32(dev->dev_attrib.block_size, &buf[8]);
/*
* Set P_TYPE and PROT_EN bits for DIF support
*/
@@ -134,8 +118,8 @@
if (dev->transport->get_alignment_offset_lbas) {
u16 lalba = dev->transport->get_alignment_offset_lbas(dev);
- buf[14] = (lalba >> 8) & 0x3f;
- buf[15] = lalba & 0xff;
+
+ put_unaligned_be16(lalba, &buf[14]);
}
/*
@@ -262,18 +246,17 @@
static inline u32 transport_get_sectors_10(unsigned char *cdb)
{
- return (u32)(cdb[7] << 8) + cdb[8];
+ return get_unaligned_be16(&cdb[7]);
}
static inline u32 transport_get_sectors_12(unsigned char *cdb)
{
- return (u32)(cdb[6] << 24) + (cdb[7] << 16) + (cdb[8] << 8) + cdb[9];
+ return get_unaligned_be32(&cdb[6]);
}
static inline u32 transport_get_sectors_16(unsigned char *cdb)
{
- return (u32)(cdb[10] << 24) + (cdb[11] << 16) +
- (cdb[12] << 8) + cdb[13];
+ return get_unaligned_be32(&cdb[10]);
}
/*
@@ -281,29 +264,23 @@
*/
static inline u32 transport_get_sectors_32(unsigned char *cdb)
{
- return (u32)(cdb[28] << 24) + (cdb[29] << 16) +
- (cdb[30] << 8) + cdb[31];
+ return get_unaligned_be32(&cdb[28]);
}
static inline u32 transport_lba_21(unsigned char *cdb)
{
- return ((cdb[1] & 0x1f) << 16) | (cdb[2] << 8) | cdb[3];
+ return get_unaligned_be24(&cdb[1]) & 0x1fffff;
}
static inline u32 transport_lba_32(unsigned char *cdb)
{
- return (cdb[2] << 24) | (cdb[3] << 16) | (cdb[4] << 8) | cdb[5];
+ return get_unaligned_be32(&cdb[2]);
}
static inline unsigned long long transport_lba_64(unsigned char *cdb)
{
- unsigned int __v1, __v2;
-
- __v1 = (cdb[2] << 24) | (cdb[3] << 16) | (cdb[4] << 8) | cdb[5];
- __v2 = (cdb[6] << 24) | (cdb[7] << 16) | (cdb[8] << 8) | cdb[9];
-
- return ((unsigned long long)__v2) | (unsigned long long)__v1 << 32;
+ return get_unaligned_be64(&cdb[2]);
}
/*
@@ -311,12 +288,7 @@
*/
static inline unsigned long long transport_lba_64_ext(unsigned char *cdb)
{
- unsigned int __v1, __v2;
-
- __v1 = (cdb[12] << 24) | (cdb[13] << 16) | (cdb[14] << 8) | cdb[15];
- __v2 = (cdb[16] << 24) | (cdb[17] << 16) | (cdb[18] << 8) | cdb[19];
-
- return ((unsigned long long)__v2) | (unsigned long long)__v1 << 32;
+ return get_unaligned_be64(&cdb[12]);
}
static sense_reason_t
@@ -1005,6 +977,12 @@
break;
}
case COMPARE_AND_WRITE:
+ if (!dev->dev_attrib.emulate_caw) {
+ pr_err_ratelimited("se_device %s/%s (vpd_unit_serial %s) reject"
+ " COMPARE_AND_WRITE\n", dev->se_hba->backend->ops->name,
+ dev->dev_group.cg_item.ci_name, dev->t10_wwn.unit_serial);
+ return TCM_UNSUPPORTED_SCSI_OPCODE;
+ }
sectors = cdb[13];
/*
* Currently enforce COMPARE_AND_WRITE for a single sector
@@ -1045,8 +1023,7 @@
cmd->t_task_cdb[1] & 0x1f);
return TCM_INVALID_CDB_FIELD;
}
- size = (cdb[10] << 24) | (cdb[11] << 16) |
- (cdb[12] << 8) | cdb[13];
+ size = get_unaligned_be32(&cdb[10]);
break;
case SYNCHRONIZE_CACHE:
case SYNCHRONIZE_CACHE_16:
diff --git a/drivers/target/target_core_spc.c b/drivers/target/target_core_spc.c
index 2a91ed3..cb0461a1 100644
--- a/drivers/target/target_core_spc.c
+++ b/drivers/target/target_core_spc.c
@@ -287,8 +287,8 @@
/* Skip over Obsolete field in RTPI payload
* in Table 472 */
off += 2;
- buf[off++] = ((lun->lun_rtpi >> 8) & 0xff);
- buf[off++] = (lun->lun_rtpi & 0xff);
+ put_unaligned_be16(lun->lun_rtpi, &buf[off]);
+ off += 2;
len += 8; /* Header size + Designation descriptor */
/*
* Target port group identifier, see spc4r17
@@ -316,8 +316,8 @@
off++; /* Skip over Reserved */
buf[off++] = 4; /* DESIGNATOR LENGTH */
off += 2; /* Skip over Reserved Field */
- buf[off++] = ((tg_pt_gp_id >> 8) & 0xff);
- buf[off++] = (tg_pt_gp_id & 0xff);
+ put_unaligned_be16(tg_pt_gp_id, &buf[off]);
+ off += 2;
len += 8; /* Header size + Designation descriptor */
/*
* Logical Unit Group identifier, see spc4r17
@@ -343,8 +343,8 @@
off++; /* Skip over Reserved */
buf[off++] = 4; /* DESIGNATOR LENGTH */
off += 2; /* Skip over Reserved Field */
- buf[off++] = ((lu_gp_id >> 8) & 0xff);
- buf[off++] = (lu_gp_id & 0xff);
+ put_unaligned_be16(lu_gp_id, &buf[off]);
+ off += 2;
len += 8; /* Header size + Designation descriptor */
/*
* SCSI name string designator, see spc4r17
@@ -431,8 +431,7 @@
/* Header size + Designation descriptor */
len += (scsi_target_len + 4);
}
- buf[2] = ((len >> 8) & 0xff);
- buf[3] = (len & 0xff); /* Page Length for VPD 0x83 */
+ put_unaligned_be16(len, &buf[2]); /* Page Length for VPD 0x83 */
return 0;
}
EXPORT_SYMBOL(spc_emulate_evpd_83);
@@ -1288,7 +1287,7 @@
cmd->execute_cmd = spc_emulate_modeselect;
break;
case MODE_SELECT_10:
- *size = (cdb[7] << 8) + cdb[8];
+ *size = get_unaligned_be16(&cdb[7]);
cmd->execute_cmd = spc_emulate_modeselect;
break;
case MODE_SENSE:
@@ -1296,25 +1295,25 @@
cmd->execute_cmd = spc_emulate_modesense;
break;
case MODE_SENSE_10:
- *size = (cdb[7] << 8) + cdb[8];
+ *size = get_unaligned_be16(&cdb[7]);
cmd->execute_cmd = spc_emulate_modesense;
break;
case LOG_SELECT:
case LOG_SENSE:
- *size = (cdb[7] << 8) + cdb[8];
+ *size = get_unaligned_be16(&cdb[7]);
break;
case PERSISTENT_RESERVE_IN:
- *size = (cdb[7] << 8) + cdb[8];
+ *size = get_unaligned_be16(&cdb[7]);
cmd->execute_cmd = target_scsi3_emulate_pr_in;
break;
case PERSISTENT_RESERVE_OUT:
- *size = (cdb[7] << 8) + cdb[8];
+ *size = get_unaligned_be32(&cdb[5]);
cmd->execute_cmd = target_scsi3_emulate_pr_out;
break;
case RELEASE:
case RELEASE_10:
if (cdb[0] == RELEASE_10)
- *size = (cdb[7] << 8) | cdb[8];
+ *size = get_unaligned_be16(&cdb[7]);
else
*size = cmd->data_length;
@@ -1327,7 +1326,7 @@
* Assume the passthrough or $FABRIC_MOD will tell us about it.
*/
if (cdb[0] == RESERVE_10)
- *size = (cdb[7] << 8) | cdb[8];
+ *size = get_unaligned_be16(&cdb[7]);
else
*size = cmd->data_length;
@@ -1338,7 +1337,7 @@
cmd->execute_cmd = spc_emulate_request_sense;
break;
case INQUIRY:
- *size = (cdb[3] << 8) + cdb[4];
+ *size = get_unaligned_be16(&cdb[3]);
/*
* Do implicit HEAD_OF_QUEUE processing for INQUIRY.
@@ -1349,7 +1348,7 @@
break;
case SECURITY_PROTOCOL_IN:
case SECURITY_PROTOCOL_OUT:
- *size = (cdb[6] << 24) | (cdb[7] << 16) | (cdb[8] << 8) | cdb[9];
+ *size = get_unaligned_be32(&cdb[6]);
break;
case EXTENDED_COPY:
*size = get_unaligned_be32(&cdb[10]);
@@ -1361,19 +1360,18 @@
break;
case READ_ATTRIBUTE:
case WRITE_ATTRIBUTE:
- *size = (cdb[10] << 24) | (cdb[11] << 16) |
- (cdb[12] << 8) | cdb[13];
+ *size = get_unaligned_be32(&cdb[10]);
break;
case RECEIVE_DIAGNOSTIC:
case SEND_DIAGNOSTIC:
- *size = (cdb[3] << 8) | cdb[4];
+ *size = get_unaligned_be16(&cdb[3]);
break;
case WRITE_BUFFER:
- *size = (cdb[6] << 16) + (cdb[7] << 8) + cdb[8];
+ *size = get_unaligned_be24(&cdb[6]);
break;
case REPORT_LUNS:
cmd->execute_cmd = spc_emulate_report_luns;
- *size = (cdb[6] << 24) | (cdb[7] << 16) | (cdb[8] << 8) | cdb[9];
+ *size = get_unaligned_be32(&cdb[6]);
/*
* Do implicit HEAD_OF_QUEUE processing for REPORT_LUNS
* See spc4r17 section 5.3
diff --git a/drivers/target/target_core_tmr.c b/drivers/target/target_core_tmr.c
index 13f47bf..e22847b 100644
--- a/drivers/target/target_core_tmr.c
+++ b/drivers/target/target_core_tmr.c
@@ -355,20 +355,10 @@
cmd = list_entry(drain_task_list.next, struct se_cmd, state_list);
list_del_init(&cmd->state_list);
- pr_debug("LUN_RESET: %s cmd: %p"
- " ITT/CmdSN: 0x%08llx/0x%08x, i_state: %d, t_state: %d"
- "cdb: 0x%02x\n",
- (preempt_and_abort_list) ? "Preempt" : "", cmd,
- cmd->tag, 0,
- cmd->se_tfo->get_cmd_state(cmd), cmd->t_state,
- cmd->t_task_cdb[0]);
- pr_debug("LUN_RESET: ITT[0x%08llx] - pr_res_key: 0x%016Lx"
- " -- CMD_T_ACTIVE: %d"
- " CMD_T_STOP: %d CMD_T_SENT: %d\n",
- cmd->tag, cmd->pr_res_key,
- (cmd->transport_state & CMD_T_ACTIVE) != 0,
- (cmd->transport_state & CMD_T_STOP) != 0,
- (cmd->transport_state & CMD_T_SENT) != 0);
+ target_show_cmd("LUN_RESET: ", cmd);
+ pr_debug("LUN_RESET: ITT[0x%08llx] - %s pr_res_key: 0x%016Lx\n",
+ cmd->tag, (preempt_and_abort_list) ? "preempt" : "",
+ cmd->pr_res_key);
/*
* If the command may be queued onto a workqueue cancel it now.
diff --git a/drivers/target/target_core_tpg.c b/drivers/target/target_core_tpg.c
index 310d9e5..3691373 100644
--- a/drivers/target/target_core_tpg.c
+++ b/drivers/target/target_core_tpg.c
@@ -576,7 +576,6 @@
return ERR_PTR(-ENOMEM);
}
lun->unpacked_lun = unpacked_lun;
- lun->lun_link_magic = SE_LUN_LINK_MAGIC;
atomic_set(&lun->lun_acl_count, 0);
init_completion(&lun->lun_ref_comp);
init_completion(&lun->lun_shutdown_comp);
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index f1b3a46..97fed9a 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -252,7 +252,7 @@
int rc;
se_sess->sess_cmd_map = kzalloc(tag_num * tag_size,
- GFP_KERNEL | __GFP_NOWARN | __GFP_REPEAT);
+ GFP_KERNEL | __GFP_NOWARN | __GFP_RETRY_MAYFAIL);
if (!se_sess->sess_cmd_map) {
se_sess->sess_cmd_map = vzalloc(tag_num * tag_size);
if (!se_sess->sess_cmd_map) {
@@ -704,23 +704,43 @@
return cmd->sense_buffer;
}
+void transport_copy_sense_to_cmd(struct se_cmd *cmd, unsigned char *sense)
+{
+ unsigned char *cmd_sense_buf;
+ unsigned long flags;
+
+ spin_lock_irqsave(&cmd->t_state_lock, flags);
+ cmd_sense_buf = transport_get_sense_buffer(cmd);
+ if (!cmd_sense_buf) {
+ spin_unlock_irqrestore(&cmd->t_state_lock, flags);
+ return;
+ }
+
+ cmd->se_cmd_flags |= SCF_TRANSPORT_TASK_SENSE;
+ memcpy(cmd_sense_buf, sense, cmd->scsi_sense_length);
+ spin_unlock_irqrestore(&cmd->t_state_lock, flags);
+}
+EXPORT_SYMBOL(transport_copy_sense_to_cmd);
+
void target_complete_cmd(struct se_cmd *cmd, u8 scsi_status)
{
struct se_device *dev = cmd->se_dev;
- int success = scsi_status == GOOD;
+ int success;
unsigned long flags;
cmd->scsi_status = scsi_status;
-
spin_lock_irqsave(&cmd->t_state_lock, flags);
-
- if (dev && dev->transport->transport_complete) {
- dev->transport->transport_complete(cmd,
- cmd->t_data_sg,
- transport_get_sense_buffer(cmd));
+ switch (cmd->scsi_status) {
+ case SAM_STAT_CHECK_CONDITION:
if (cmd->se_cmd_flags & SCF_TRANSPORT_TASK_SENSE)
success = 1;
+ else
+ success = 0;
+ break;
+ default:
+ success = 1;
+ break;
}
/*
@@ -730,6 +750,15 @@
if (cmd->transport_state & CMD_T_ABORTED ||
cmd->transport_state & CMD_T_STOP) {
spin_unlock_irqrestore(&cmd->t_state_lock, flags);
+ /*
+ * If COMPARE_AND_WRITE was stopped by __transport_wait_for_tasks(),
+ * release se_device->caw_sem obtained by sbc_compare_and_write()
+ * since target_complete_ok_work() or target_complete_failure_work()
+ * won't be called to invoke the normal CAW completion callbacks.
+ */
+ if (cmd->se_cmd_flags & SCF_COMPARE_AND_WRITE) {
+ up(&dev->caw_sem);
+ }
complete_all(&cmd->t_transport_stop_comp);
return;
} else if (!success) {
@@ -1239,6 +1268,7 @@
init_completion(&cmd->t_transport_stop_comp);
init_completion(&cmd->cmd_wait_comp);
spin_lock_init(&cmd->t_state_lock);
+ INIT_WORK(&cmd->work, NULL);
kref_init(&cmd->cmd_kref);
cmd->se_tfo = tfo;
@@ -1590,9 +1620,33 @@
se_cmd->se_tmr_req->response = TMR_LUN_DOES_NOT_EXIST;
se_cmd->se_tfo->queue_tm_rsp(se_cmd);
+ transport_lun_remove_cmd(se_cmd);
transport_cmd_check_stop_to_fabric(se_cmd);
}
+static bool target_lookup_lun_from_tag(struct se_session *se_sess, u64 tag,
+ u64 *unpacked_lun)
+{
+ struct se_cmd *se_cmd;
+ unsigned long flags;
+ bool ret = false;
+
+ spin_lock_irqsave(&se_sess->sess_cmd_lock, flags);
+ list_for_each_entry(se_cmd, &se_sess->sess_cmd_list, se_cmd_list) {
+ if (se_cmd->se_cmd_flags & SCF_SCSI_TMR_CDB)
+ continue;
+
+ if (se_cmd->tag == tag) {
+ *unpacked_lun = se_cmd->orig_fe_lun;
+ ret = true;
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags);
+
+ return ret;
+}
+
/**
* target_submit_tmr - lookup unpacked lun and submit uninitialized se_cmd
* for TMR CDBs
@@ -1640,19 +1694,31 @@
core_tmr_release_req(se_cmd->se_tmr_req);
return ret;
}
+ /*
+ * If this is ABORT_TASK with no explicit fabric provided LUN,
+ * go ahead and search active session tags for a match to figure
+ * out unpacked_lun for the original se_cmd.
+ */
+ if (tm_type == TMR_ABORT_TASK && (flags & TARGET_SCF_LOOKUP_LUN_FROM_TAG)) {
+ if (!target_lookup_lun_from_tag(se_sess, tag, &unpacked_lun))
+ goto failure;
+ }
ret = transport_lookup_tmr_lun(se_cmd, unpacked_lun);
- if (ret) {
- /*
- * For callback during failure handling, push this work off
- * to process context with TMR_LUN_DOES_NOT_EXIST status.
- */
- INIT_WORK(&se_cmd->work, target_complete_tmr_failure);
- schedule_work(&se_cmd->work);
- return 0;
- }
+ if (ret)
+ goto failure;
+
transport_generic_handle_tmr(se_cmd);
return 0;
+
+ /*
+ * For callback during failure handling, push this work off
+ * to process context with TMR_LUN_DOES_NOT_EXIST status.
+ */
+failure:
+ INIT_WORK(&se_cmd->work, target_complete_tmr_failure);
+ schedule_work(&se_cmd->work);
+ return 0;
}
EXPORT_SYMBOL(target_submit_tmr);
@@ -1667,15 +1733,9 @@
if (transport_check_aborted_status(cmd, 1))
return;
- pr_debug("-----[ Storage Engine Exception for cmd: %p ITT: 0x%08llx"
- " CDB: 0x%02x\n", cmd, cmd->tag, cmd->t_task_cdb[0]);
- pr_debug("-----[ i_state: %d t_state: %d sense_reason: %d\n",
- cmd->se_tfo->get_cmd_state(cmd),
- cmd->t_state, sense_reason);
- pr_debug("-----[ CMD_T_ACTIVE: %d CMD_T_STOP: %d CMD_T_SENT: %d\n",
- (cmd->transport_state & CMD_T_ACTIVE) != 0,
- (cmd->transport_state & CMD_T_STOP) != 0,
- (cmd->transport_state & CMD_T_SENT) != 0);
+ pr_debug("-----[ Storage Engine Exception; sense_reason %d\n",
+ sense_reason);
+ target_show_cmd("-----[ ", cmd);
/*
* For SAM Task Attribute emulation for failed struct se_cmd
@@ -2668,6 +2728,108 @@
}
EXPORT_SYMBOL(target_put_sess_cmd);
+static const char *data_dir_name(enum dma_data_direction d)
+{
+ switch (d) {
+ case DMA_BIDIRECTIONAL: return "BIDI";
+ case DMA_TO_DEVICE: return "WRITE";
+ case DMA_FROM_DEVICE: return "READ";
+ case DMA_NONE: return "NONE";
+ }
+
+ return "(?)";
+}
+
+static const char *cmd_state_name(enum transport_state_table t)
+{
+ switch (t) {
+ case TRANSPORT_NO_STATE: return "NO_STATE";
+ case TRANSPORT_NEW_CMD: return "NEW_CMD";
+ case TRANSPORT_WRITE_PENDING: return "WRITE_PENDING";
+ case TRANSPORT_PROCESSING: return "PROCESSING";
+ case TRANSPORT_COMPLETE: return "COMPLETE";
+ case TRANSPORT_ISTATE_PROCESSING:
+ return "ISTATE_PROCESSING";
+ case TRANSPORT_COMPLETE_QF_WP: return "COMPLETE_QF_WP";
+ case TRANSPORT_COMPLETE_QF_OK: return "COMPLETE_QF_OK";
+ case TRANSPORT_COMPLETE_QF_ERR: return "COMPLETE_QF_ERR";
+ }
+
+ return "(?)";
+}
+
+static void target_append_str(char **str, const char *txt)
+{
+ char *prev = *str;
+
+ *str = *str ? kasprintf(GFP_ATOMIC, "%s,%s", *str, txt) :
+ kstrdup(txt, GFP_ATOMIC);
+ kfree(prev);
+}
+
+/*
+ * Convert a transport state bitmask into a string. The caller is
+ * responsible for freeing the returned pointer.
+ */
+static char *target_ts_to_str(u32 ts)
+{
+ char *str = NULL;
+
+ if (ts & CMD_T_ABORTED)
+ target_append_str(&str, "aborted");
+ if (ts & CMD_T_ACTIVE)
+ target_append_str(&str, "active");
+ if (ts & CMD_T_COMPLETE)
+ target_append_str(&str, "complete");
+ if (ts & CMD_T_SENT)
+ target_append_str(&str, "sent");
+ if (ts & CMD_T_STOP)
+ target_append_str(&str, "stop");
+ if (ts & CMD_T_FABRIC_STOP)
+ target_append_str(&str, "fabric_stop");
+
+ return str;
+}
+
+static const char *target_tmf_name(enum tcm_tmreq_table tmf)
+{
+ switch (tmf) {
+ case TMR_ABORT_TASK: return "ABORT_TASK";
+ case TMR_ABORT_TASK_SET: return "ABORT_TASK_SET";
+ case TMR_CLEAR_ACA: return "CLEAR_ACA";
+ case TMR_CLEAR_TASK_SET: return "CLEAR_TASK_SET";
+ case TMR_LUN_RESET: return "LUN_RESET";
+ case TMR_TARGET_WARM_RESET: return "TARGET_WARM_RESET";
+ case TMR_TARGET_COLD_RESET: return "TARGET_COLD_RESET";
+ case TMR_UNKNOWN: break;
+ }
+ return "(?)";
+}
+
+void target_show_cmd(const char *pfx, struct se_cmd *cmd)
+{
+ char *ts_str = target_ts_to_str(cmd->transport_state);
+ const u8 *cdb = cmd->t_task_cdb;
+ struct se_tmr_req *tmf = cmd->se_tmr_req;
+
+ if (!(cmd->se_cmd_flags & SCF_SCSI_TMR_CDB)) {
+ pr_debug("%scmd %#02x:%#02x with tag %#llx dir %s i_state %d t_state %s len %d refcnt %d transport_state %s\n",
+ pfx, cdb[0], cdb[1], cmd->tag,
+ data_dir_name(cmd->data_direction),
+ cmd->se_tfo->get_cmd_state(cmd),
+ cmd_state_name(cmd->t_state), cmd->data_length,
+ kref_read(&cmd->cmd_kref), ts_str);
+ } else {
+ pr_debug("%stmf %s with tag %#llx ref_task_tag %#llx i_state %d t_state %s refcnt %d transport_state %s\n",
+ pfx, target_tmf_name(tmf->function), cmd->tag,
+ tmf->ref_task_tag, cmd->se_tfo->get_cmd_state(cmd),
+ cmd_state_name(cmd->t_state),
+ kref_read(&cmd->cmd_kref), ts_str);
+ }
+ kfree(ts_str);
+}
+EXPORT_SYMBOL(target_show_cmd);
+
/* target_sess_cmd_list_set_waiting - Flag all commands in
* sess_cmd_list to complete cmd_wait_comp. Set
* sess_tearing_down so no more commands are queued.
@@ -2812,13 +2974,13 @@
cmd->transport_state |= CMD_T_STOP;
- pr_debug("wait_for_tasks: Stopping %p ITT: 0x%08llx i_state: %d,"
- " t_state: %d, CMD_T_STOP\n", cmd, cmd->tag,
- cmd->se_tfo->get_cmd_state(cmd), cmd->t_state);
+ target_show_cmd("wait_for_tasks: Stopping ", cmd);
spin_unlock_irqrestore(&cmd->t_state_lock, *flags);
- wait_for_completion(&cmd->t_transport_stop_comp);
+ while (!wait_for_completion_timeout(&cmd->t_transport_stop_comp,
+ 180 * HZ))
+ target_show_cmd("wait for tasks: ", cmd);
spin_lock_irqsave(&cmd->t_state_lock, *flags);
cmd->transport_state &= ~(CMD_T_ACTIVE | CMD_T_STOP);
@@ -3201,6 +3363,7 @@
cmd->se_tfo->queue_tm_rsp(cmd);
check_stop:
+ transport_lun_remove_cmd(cmd);
transport_cmd_check_stop_to_fabric(cmd);
}
@@ -3223,6 +3386,7 @@
pr_warn_ratelimited("handle_tmr caught CMD_T_ABORTED TMR %d"
"ref_tag: %llu tag: %llu\n", cmd->se_tmr_req->function,
cmd->se_tmr_req->ref_task_tag, cmd->tag);
+ transport_lun_remove_cmd(cmd);
transport_cmd_check_stop_to_fabric(cmd);
return 0;
}
diff --git a/drivers/target/target_core_user.c b/drivers/target/target_core_user.c
index beb5f09..80ee130 100644
--- a/drivers/target/target_core_user.c
+++ b/drivers/target/target_core_user.c
@@ -87,6 +87,8 @@
/* Default maximum of the global data blocks(512K * PAGE_SIZE) */
#define TCMU_GLOBAL_MAX_BLOCKS (512 * 1024)
+static u8 tcmu_kern_cmd_reply_supported;
+
static struct device *tcmu_root_device;
struct tcmu_hba {
@@ -95,6 +97,13 @@
#define TCMU_CONFIG_LEN 256
+struct tcmu_nl_cmd {
+ /* wake up thread waiting for reply */
+ struct completion complete;
+ int cmd;
+ int status;
+};
+
struct tcmu_dev {
struct list_head node;
struct kref kref;
@@ -135,6 +144,11 @@
struct timer_list timeout;
unsigned int cmd_time_out;
+ spinlock_t nl_cmd_lock;
+ struct tcmu_nl_cmd curr_nl_cmd;
+ /* wake up threads waiting on curr_nl_cmd */
+ wait_queue_head_t nl_cmd_wq;
+
char dev_config[TCMU_CONFIG_LEN];
};
@@ -178,16 +192,128 @@
[TCMU_MCGRP_CONFIG] = { .name = "config", },
};
+static struct nla_policy tcmu_attr_policy[TCMU_ATTR_MAX+1] = {
+ [TCMU_ATTR_DEVICE] = { .type = NLA_STRING },
+ [TCMU_ATTR_MINOR] = { .type = NLA_U32 },
+ [TCMU_ATTR_CMD_STATUS] = { .type = NLA_S32 },
+ [TCMU_ATTR_DEVICE_ID] = { .type = NLA_U32 },
+ [TCMU_ATTR_SUPP_KERN_CMD_REPLY] = { .type = NLA_U8 },
+};
+
+static int tcmu_genl_cmd_done(struct genl_info *info, int completed_cmd)
+{
+ struct se_device *dev;
+ struct tcmu_dev *udev;
+ struct tcmu_nl_cmd *nl_cmd;
+ int dev_id, rc, ret = 0;
+ bool is_removed = (completed_cmd == TCMU_CMD_REMOVED_DEVICE);
+
+ if (!info->attrs[TCMU_ATTR_CMD_STATUS] ||
+ !info->attrs[TCMU_ATTR_DEVICE_ID]) {
+ printk(KERN_ERR "TCMU_ATTR_CMD_STATUS or TCMU_ATTR_DEVICE_ID not set, doing nothing\n");
+ return -EINVAL;
+ }
+
+ dev_id = nla_get_u32(info->attrs[TCMU_ATTR_DEVICE_ID]);
+ rc = nla_get_s32(info->attrs[TCMU_ATTR_CMD_STATUS]);
+
+ dev = target_find_device(dev_id, !is_removed);
+ if (!dev) {
+ printk(KERN_ERR "tcmu nl cmd %u/%u completion could not find device with dev id %u.\n",
+ completed_cmd, rc, dev_id);
+ return -ENODEV;
+ }
+ udev = TCMU_DEV(dev);
+
+ spin_lock(&udev->nl_cmd_lock);
+ nl_cmd = &udev->curr_nl_cmd;
+
+ pr_debug("genl cmd done got id %d curr %d done %d rc %d\n", dev_id,
+ nl_cmd->cmd, completed_cmd, rc);
+
+ if (nl_cmd->cmd != completed_cmd) {
+ printk(KERN_ERR "Mismatched commands (Expecting reply for %d. Current %d).\n",
+ completed_cmd, nl_cmd->cmd);
+ ret = -EINVAL;
+ } else {
+ nl_cmd->status = rc;
+ }
+
+ spin_unlock(&udev->nl_cmd_lock);
+ if (!is_removed)
+ target_undepend_item(&dev->dev_group.cg_item);
+ if (!ret)
+ complete(&nl_cmd->complete);
+ return ret;
+}
+
+static int tcmu_genl_rm_dev_done(struct sk_buff *skb, struct genl_info *info)
+{
+ return tcmu_genl_cmd_done(info, TCMU_CMD_REMOVED_DEVICE);
+}
+
+static int tcmu_genl_add_dev_done(struct sk_buff *skb, struct genl_info *info)
+{
+ return tcmu_genl_cmd_done(info, TCMU_CMD_ADDED_DEVICE);
+}
+
+static int tcmu_genl_reconfig_dev_done(struct sk_buff *skb,
+ struct genl_info *info)
+{
+ return tcmu_genl_cmd_done(info, TCMU_CMD_RECONFIG_DEVICE);
+}
+
+static int tcmu_genl_set_features(struct sk_buff *skb, struct genl_info *info)
+{
+ if (info->attrs[TCMU_ATTR_SUPP_KERN_CMD_REPLY]) {
+ tcmu_kern_cmd_reply_supported =
+ nla_get_u8(info->attrs[TCMU_ATTR_SUPP_KERN_CMD_REPLY]);
+ printk(KERN_INFO "tcmu daemon: command reply support %u.\n",
+ tcmu_kern_cmd_reply_supported);
+ }
+
+ return 0;
+}
+
+static const struct genl_ops tcmu_genl_ops[] = {
+ {
+ .cmd = TCMU_CMD_SET_FEATURES,
+ .flags = GENL_ADMIN_PERM,
+ .policy = tcmu_attr_policy,
+ .doit = tcmu_genl_set_features,
+ },
+ {
+ .cmd = TCMU_CMD_ADDED_DEVICE_DONE,
+ .flags = GENL_ADMIN_PERM,
+ .policy = tcmu_attr_policy,
+ .doit = tcmu_genl_add_dev_done,
+ },
+ {
+ .cmd = TCMU_CMD_REMOVED_DEVICE_DONE,
+ .flags = GENL_ADMIN_PERM,
+ .policy = tcmu_attr_policy,
+ .doit = tcmu_genl_rm_dev_done,
+ },
+ {
+ .cmd = TCMU_CMD_RECONFIG_DEVICE_DONE,
+ .flags = GENL_ADMIN_PERM,
+ .policy = tcmu_attr_policy,
+ .doit = tcmu_genl_reconfig_dev_done,
+ },
+};
+
/* Our generic netlink family */
static struct genl_family tcmu_genl_family __ro_after_init = {
.module = THIS_MODULE,
.hdrsize = 0,
.name = "TCM-USER",
- .version = 1,
+ .version = 2,
.maxattr = TCMU_ATTR_MAX,
.mcgrps = tcmu_mcgrps,
.n_mcgrps = ARRAY_SIZE(tcmu_mcgrps),
.netnsok = true,
+ .ops = tcmu_genl_ops,
+ .n_ops = ARRAY_SIZE(tcmu_genl_ops),
};
#define tcmu_cmd_set_dbi_cur(cmd, index) ((cmd)->dbi_cur = (index))
@@ -216,7 +342,6 @@
page = radix_tree_lookup(&udev->data_blocks, dbi);
if (!page) {
-
if (atomic_add_return(1, &global_db_count) >
TCMU_GLOBAL_MAX_BLOCKS) {
atomic_dec(&global_db_count);
@@ -226,14 +351,11 @@
/* try to get new page from the mm */
page = alloc_page(GFP_KERNEL);
if (!page)
- return false;
+ goto err_alloc;
ret = radix_tree_insert(&udev->data_blocks, dbi, page);
- if (ret) {
- __free_page(page);
- return false;
- }
-
+ if (ret)
+ goto err_insert;
}
if (dbi > udev->dbi_max)
@@ -243,6 +365,11 @@
tcmu_cmd_set_dbi(tcmu_cmd, dbi);
return true;
+err_insert:
+ __free_page(page);
+err_alloc:
+ atomic_dec(&global_db_count);
+ return false;
}
static bool tcmu_get_empty_blocks(struct tcmu_dev *udev,
@@ -401,7 +528,7 @@
DATA_BLOCK_SIZE - remaining;
}
-static inline size_t iov_tail(struct tcmu_dev *udev, struct iovec *iov)
+static inline size_t iov_tail(struct iovec *iov)
{
return (size_t)iov->iov_base + iov->iov_len;
}
@@ -437,10 +564,10 @@
to_offset = get_block_offset_user(udev, dbi,
block_remaining);
offset = DATA_BLOCK_SIZE - block_remaining;
- to = (void *)(unsigned long)to + offset;
+ to += offset;
if (*iov_cnt != 0 &&
- to_offset == iov_tail(udev, *iov)) {
+ to_offset == iov_tail(*iov)) {
(*iov)->iov_len += copy_bytes;
} else {
new_iov(iov, iov_cnt, udev);
@@ -510,7 +637,7 @@
copy_bytes = min_t(size_t, sg_remaining,
block_remaining);
offset = DATA_BLOCK_SIZE - block_remaining;
- from = (void *)(unsigned long)from + offset;
+ from += offset;
tcmu_flush_dcache_range(from, copy_bytes);
memcpy(to + sg->length - sg_remaining, from,
copy_bytes);
@@ -596,10 +723,7 @@
}
}
- if (!tcmu_get_empty_blocks(udev, cmd))
- return false;
-
- return true;
+ return tcmu_get_empty_blocks(udev, cmd);
}
static inline size_t tcmu_cmd_get_base_cmd_size(size_t iov_cnt)
@@ -699,25 +823,24 @@
size_t pad_size = head_to_end(cmd_head, udev->cmdr_size);
entry = (void *) mb + CMDR_OFF + cmd_head;
- tcmu_flush_dcache_range(entry, sizeof(*entry));
tcmu_hdr_set_op(&entry->hdr.len_op, TCMU_OP_PAD);
tcmu_hdr_set_len(&entry->hdr.len_op, pad_size);
entry->hdr.cmd_id = 0; /* not used for PAD */
entry->hdr.kflags = 0;
entry->hdr.uflags = 0;
+ tcmu_flush_dcache_range(entry, sizeof(*entry));
UPDATE_HEAD(mb->cmd_head, pad_size, udev->cmdr_size);
+ tcmu_flush_dcache_range(mb, sizeof(*mb));
cmd_head = mb->cmd_head % udev->cmdr_size; /* UAM */
WARN_ON(cmd_head != 0);
}
entry = (void *) mb + CMDR_OFF + cmd_head;
- tcmu_flush_dcache_range(entry, sizeof(*entry));
+ memset(entry, 0, command_size);
tcmu_hdr_set_op(&entry->hdr.len_op, TCMU_OP_CMD);
entry->hdr.cmd_id = tcmu_cmd->cmd_id;
- entry->hdr.kflags = 0;
- entry->hdr.uflags = 0;
/* Handle allocating space from the data area */
tcmu_cmd_reset_dbi_cur(tcmu_cmd);
@@ -736,11 +859,10 @@
return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
}
entry->req.iov_cnt = iov_cnt;
- entry->req.iov_dif_cnt = 0;
/* Handle BIDI commands */
+ iov_cnt = 0;
if (se_cmd->se_cmd_flags & SCF_BIDI) {
- iov_cnt = 0;
iov++;
ret = scatter_data_area(udev, tcmu_cmd,
se_cmd->t_bidi_data_sg,
@@ -753,8 +875,8 @@
pr_err("tcmu: alloc and scatter bidi data failed\n");
return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
}
- entry->req.iov_bidi_cnt = iov_cnt;
}
+ entry->req.iov_bidi_cnt = iov_cnt;
/*
* Recalaulate the command's base size and size according
@@ -830,8 +952,7 @@
cmd->se_cmd);
entry->rsp.scsi_status = SAM_STAT_CHECK_CONDITION;
} else if (entry->rsp.scsi_status == SAM_STAT_CHECK_CONDITION) {
- memcpy(se_cmd->sense_buffer, entry->rsp.sense_buffer,
- se_cmd->scsi_sense_length);
+ transport_copy_sense_to_cmd(se_cmd, entry->rsp.sense_buffer);
} else if (se_cmd->se_cmd_flags & SCF_BIDI) {
/* Get Data-In buffer before clean up */
gather_data_area(udev, cmd, true);
@@ -989,6 +1110,9 @@
setup_timer(&udev->timeout, tcmu_device_timedout,
(unsigned long)udev);
+ init_waitqueue_head(&udev->nl_cmd_wq);
+ spin_lock_init(&udev->nl_cmd_lock);
+
return &udev->se_dev;
}
@@ -1140,6 +1264,7 @@
return -EBUSY;
udev->inode = inode;
+ kref_get(&udev->kref);
pr_debug("open\n");
@@ -1171,12 +1296,59 @@
clear_bit(TCMU_DEV_BIT_OPEN, &udev->flags);
pr_debug("close\n");
- /* release ref from configure */
+ /* release ref from open */
kref_put(&udev->kref, tcmu_dev_kref_release);
return 0;
}
-static int tcmu_netlink_event(enum tcmu_genl_cmd cmd, const char *name, int minor)
+static void tcmu_init_genl_cmd_reply(struct tcmu_dev *udev, int cmd)
+{
+ struct tcmu_nl_cmd *nl_cmd = &udev->curr_nl_cmd;
+
+ if (!tcmu_kern_cmd_reply_supported)
+ return;
+relock:
+ spin_lock(&udev->nl_cmd_lock);
+
+ if (nl_cmd->cmd != TCMU_CMD_UNSPEC) {
+ spin_unlock(&udev->nl_cmd_lock);
+ pr_debug("sleeping for open nl cmd\n");
+ wait_event(udev->nl_cmd_wq, (nl_cmd->cmd == TCMU_CMD_UNSPEC));
+ goto relock;
+ }
+
+ memset(nl_cmd, 0, sizeof(*nl_cmd));
+ nl_cmd->cmd = cmd;
+ init_completion(&nl_cmd->complete);
+
+ spin_unlock(&udev->nl_cmd_lock);
+}
+
+static int tcmu_wait_genl_cmd_reply(struct tcmu_dev *udev)
+{
+ struct tcmu_nl_cmd *nl_cmd = &udev->curr_nl_cmd;
+ int ret;
+ DEFINE_WAIT(__wait);
+
+ if (!tcmu_kern_cmd_reply_supported)
+ return 0;
+
+ pr_debug("sleeping for nl reply\n");
+ wait_for_completion(&nl_cmd->complete);
+
+ spin_lock(&udev->nl_cmd_lock);
+ nl_cmd->cmd = TCMU_CMD_UNSPEC;
+ ret = nl_cmd->status;
+ nl_cmd->status = 0;
+ spin_unlock(&udev->nl_cmd_lock);
+
+ wake_up_all(&udev->nl_cmd_wq);
+
+ return ret;;
+}
+
+static int tcmu_netlink_event(struct tcmu_dev *udev, enum tcmu_genl_cmd cmd,
+ int reconfig_attr, const void *reconfig_data)
{
struct sk_buff *skb;
void *msg_header;
@@ -1190,22 +1362,51 @@
if (!msg_header)
goto free_skb;
- ret = nla_put_string(skb, TCMU_ATTR_DEVICE, name);
+ ret = nla_put_string(skb, TCMU_ATTR_DEVICE, udev->uio_info.name);
if (ret < 0)
goto free_skb;
- ret = nla_put_u32(skb, TCMU_ATTR_MINOR, minor);
+ ret = nla_put_u32(skb, TCMU_ATTR_MINOR, udev->uio_info.uio_dev->minor);
if (ret < 0)
goto free_skb;
+ ret = nla_put_u32(skb, TCMU_ATTR_DEVICE_ID, udev->se_dev.dev_index);
+ if (ret < 0)
+ goto free_skb;
+
+ if (cmd == TCMU_CMD_RECONFIG_DEVICE) {
+ switch (reconfig_attr) {
+ case TCMU_ATTR_DEV_CFG:
+ ret = nla_put_string(skb, reconfig_attr, reconfig_data);
+ break;
+ case TCMU_ATTR_DEV_SIZE:
+ ret = nla_put_u64_64bit(skb, reconfig_attr,
+ *((u64 *)reconfig_data),
+ TCMU_ATTR_PAD);
+ break;
+ case TCMU_ATTR_WRITECACHE:
+ ret = nla_put_u8(skb, reconfig_attr,
+ *((u8 *)reconfig_data));
+ break;
+ default:
+ BUG();
+ }
+
+ if (ret < 0)
+ goto free_skb;
+ }
+
genlmsg_end(skb, msg_header);
+ tcmu_init_genl_cmd_reply(udev, cmd);
+
ret = genlmsg_multicast_allns(&tcmu_genl_family, skb, 0,
TCMU_MCGRP_CONFIG, GFP_KERNEL);
-
/* We don't care if no one is listening */
if (ret == -ESRCH)
ret = 0;
+ if (!ret)
+ ret = tcmu_wait_genl_cmd_reply(udev);
return ret;
free_skb:
@@ -1213,19 +1414,14 @@
return ret;
}
-static int tcmu_configure_device(struct se_device *dev)
+static int tcmu_update_uio_info(struct tcmu_dev *udev)
{
- struct tcmu_dev *udev = TCMU_DEV(dev);
struct tcmu_hba *hba = udev->hba->hba_ptr;
struct uio_info *info;
- struct tcmu_mailbox *mb;
- size_t size;
- size_t used;
- int ret = 0;
+ size_t size, used;
char *str;
info = &udev->uio_info;
-
size = snprintf(NULL, 0, "tcm-user/%u/%s/%s", hba->host_id, udev->name,
udev->dev_config);
size += 1; /* for \0 */
@@ -1234,12 +1430,27 @@
return -ENOMEM;
used = snprintf(str, size, "tcm-user/%u/%s", hba->host_id, udev->name);
-
if (udev->dev_config[0])
snprintf(str + used, size - used, "/%s", udev->dev_config);
info->name = str;
+ return 0;
+}
+
+static int tcmu_configure_device(struct se_device *dev)
+{
+ struct tcmu_dev *udev = TCMU_DEV(dev);
+ struct uio_info *info;
+ struct tcmu_mailbox *mb;
+ int ret = 0;
+
+ ret = tcmu_update_uio_info(udev);
+ if (ret)
+ return ret;
+
+ info = &udev->uio_info;
+
udev->mb_addr = vzalloc(CMDR_SIZE);
if (!udev->mb_addr) {
ret = -ENOMEM;
@@ -1290,6 +1501,8 @@
/* Other attributes can be configured in userspace */
if (!dev->dev_attrib.hw_max_sectors)
dev->dev_attrib.hw_max_sectors = 128;
+ if (!dev->dev_attrib.emulate_write_cache)
+ dev->dev_attrib.emulate_write_cache = 0;
dev->dev_attrib.hw_queue_depth = 128;
/*
@@ -1298,8 +1511,7 @@
*/
kref_get(&udev->kref);
- ret = tcmu_netlink_event(TCMU_CMD_ADDED_DEVICE, udev->uio_info.name,
- udev->uio_info.uio_dev->minor);
+ ret = tcmu_netlink_event(udev, TCMU_CMD_ADDED_DEVICE, 0, NULL);
if (ret)
goto err_netlink;
@@ -1355,6 +1567,14 @@
static void tcmu_free_device(struct se_device *dev)
{
struct tcmu_dev *udev = TCMU_DEV(dev);
+
+ /* release ref from init */
+ kref_put(&udev->kref, tcmu_dev_kref_release);
+}
+
+static void tcmu_destroy_device(struct se_device *dev)
+{
+ struct tcmu_dev *udev = TCMU_DEV(dev);
struct tcmu_cmd *cmd;
bool all_expired = true;
int i;
@@ -1379,14 +1599,11 @@
tcmu_blocks_release(udev);
- if (tcmu_dev_configured(udev)) {
- tcmu_netlink_event(TCMU_CMD_REMOVED_DEVICE, udev->uio_info.name,
- udev->uio_info.uio_dev->minor);
+ tcmu_netlink_event(udev, TCMU_CMD_REMOVED_DEVICE, 0, NULL);
- uio_unregister_device(&udev->uio_info);
- }
+ uio_unregister_device(&udev->uio_info);
- /* release ref from init */
+ /* release ref from configure */
kref_put(&udev->kref, tcmu_dev_kref_release);
}
@@ -1546,6 +1763,129 @@
}
CONFIGFS_ATTR(tcmu_, cmd_time_out);
+static ssize_t tcmu_dev_config_show(struct config_item *item, char *page)
+{
+ struct se_dev_attrib *da = container_of(to_config_group(item),
+ struct se_dev_attrib, da_group);
+ struct tcmu_dev *udev = TCMU_DEV(da->da_dev);
+
+ return snprintf(page, PAGE_SIZE, "%s\n", udev->dev_config);
+}
+
+static ssize_t tcmu_dev_config_store(struct config_item *item, const char *page,
+ size_t count)
+{
+ struct se_dev_attrib *da = container_of(to_config_group(item),
+ struct se_dev_attrib, da_group);
+ struct tcmu_dev *udev = TCMU_DEV(da->da_dev);
+ int ret, len;
+
+ len = strlen(page);
+ if (!len || len > TCMU_CONFIG_LEN - 1)
+ return -EINVAL;
+
+ /* Check if device has been configured before */
+ if (tcmu_dev_configured(udev)) {
+ ret = tcmu_netlink_event(udev, TCMU_CMD_RECONFIG_DEVICE,
+ TCMU_ATTR_DEV_CFG, page);
+ if (ret) {
+ pr_err("Unable to reconfigure device\n");
+ return ret;
+ }
+ strlcpy(udev->dev_config, page, TCMU_CONFIG_LEN);
+
+ ret = tcmu_update_uio_info(udev);
+ if (ret)
+ return ret;
+ return count;
+ }
+ strlcpy(udev->dev_config, page, TCMU_CONFIG_LEN);
+
+ return count;
+}
+CONFIGFS_ATTR(tcmu_, dev_config);
+
+static ssize_t tcmu_dev_size_show(struct config_item *item, char *page)
+{
+ struct se_dev_attrib *da = container_of(to_config_group(item),
+ struct se_dev_attrib, da_group);
+ struct tcmu_dev *udev = TCMU_DEV(da->da_dev);
+
+ return snprintf(page, PAGE_SIZE, "%zu\n", udev->dev_size);
+}
+
+static ssize_t tcmu_dev_size_store(struct config_item *item, const char *page,
+ size_t count)
+{
+ struct se_dev_attrib *da = container_of(to_config_group(item),
+ struct se_dev_attrib, da_group);
+ struct tcmu_dev *udev = TCMU_DEV(da->da_dev);
+ u64 val;
+ int ret;
+
+ ret = kstrtou64(page, 0, &val);
+ if (ret < 0)
+ return ret;
+
+ /* Check if device has been configured before */
+ if (tcmu_dev_configured(udev)) {
+ ret = tcmu_netlink_event(udev, TCMU_CMD_RECONFIG_DEVICE,
+ TCMU_ATTR_DEV_SIZE, &val);
+ if (ret) {
+ pr_err("Unable to reconfigure device\n");
+ return ret;
+ }
+ }
+ udev->dev_size = val;
+ return count;
+}
+CONFIGFS_ATTR(tcmu_, dev_size);
+
+static ssize_t tcmu_emulate_write_cache_show(struct config_item *item,
+ char *page)
+{
+ struct se_dev_attrib *da = container_of(to_config_group(item),
+ struct se_dev_attrib, da_group);
+
+ return snprintf(page, PAGE_SIZE, "%i\n", da->emulate_write_cache);
+}
+
+static ssize_t tcmu_emulate_write_cache_store(struct config_item *item,
+ const char *page, size_t count)
+{
+ struct se_dev_attrib *da = container_of(to_config_group(item),
+ struct se_dev_attrib, da_group);
+ struct tcmu_dev *udev = TCMU_DEV(da->da_dev);
+ u8 val;
+ int ret;
+
+ ret = kstrtou8(page, 0, &val);
+ if (ret < 0)
+ return ret;
+
+ /* Check if device has been configured before */
+ if (tcmu_dev_configured(udev)) {
+ ret = tcmu_netlink_event(udev, TCMU_CMD_RECONFIG_DEVICE,
+ TCMU_ATTR_WRITECACHE, &val);
+ if (ret) {
+ pr_err("Unable to reconfigure device\n");
+ return ret;
+ }
+ }
+
+ da->emulate_write_cache = val;
+ return count;
+}
+CONFIGFS_ATTR(tcmu_, emulate_write_cache);
+
+static struct configfs_attribute *tcmu_attrib_attrs[] = {
+ &tcmu_attr_cmd_time_out,
+ &tcmu_attr_dev_config,
+ &tcmu_attr_dev_size,
+ &tcmu_attr_emulate_write_cache,
+ NULL,
+};
+
static struct configfs_attribute **tcmu_attrs;
static struct target_backend_ops tcmu_ops = {
@@ -1556,6 +1896,7 @@
.detach_hba = tcmu_detach_hba,
.alloc_device = tcmu_alloc_device,
.configure_device = tcmu_configure_device,
+ .destroy_device = tcmu_destroy_device,
.free_device = tcmu_free_device,
.parse_cdb = tcmu_parse_cdb,
.set_configfs_dev_params = tcmu_set_configfs_dev_params,
@@ -1573,7 +1914,7 @@
struct page *page;
int i;
- while (1) {
+ while (!kthread_should_stop()) {
DEFINE_WAIT(__wait);
prepare_to_wait(&unmap_wait, &__wait, TASK_INTERRUPTIBLE);
@@ -1645,7 +1986,7 @@
static int __init tcmu_module_init(void)
{
- int ret, i, len = 0;
+ int ret, i, k, len = 0;
BUILD_BUG_ON((sizeof(struct tcmu_cmd_entry) % TCMU_OP_ALIGN_SIZE) != 0);
@@ -1670,7 +2011,10 @@
for (i = 0; passthrough_attrib_attrs[i] != NULL; i++) {
len += sizeof(struct configfs_attribute *);
}
- len += sizeof(struct configfs_attribute *) * 2;
+ for (i = 0; tcmu_attrib_attrs[i] != NULL; i++) {
+ len += sizeof(struct configfs_attribute *);
+ }
+ len += sizeof(struct configfs_attribute *);
tcmu_attrs = kzalloc(len, GFP_KERNEL);
if (!tcmu_attrs) {
@@ -1681,7 +2025,10 @@
for (i = 0; passthrough_attrib_attrs[i] != NULL; i++) {
tcmu_attrs[i] = passthrough_attrib_attrs[i];
}
- tcmu_attrs[i] = &tcmu_attr_cmd_time_out;
+ for (k = 0; tcmu_attrib_attrs[k] != NULL; k++) {
+ tcmu_attrs[i] = tcmu_attrib_attrs[k];
+ i++;
+ }
tcmu_ops.tb_dev_attrib_attrs = tcmu_attrs;
ret = transport_backend_register(&tcmu_ops);
diff --git a/drivers/target/target_core_xcopy.c b/drivers/target/target_core_xcopy.c
index cac5a20..9ee89e0 100644
--- a/drivers/target/target_core_xcopy.c
+++ b/drivers/target/target_core_xcopy.c
@@ -40,6 +40,8 @@
static struct workqueue_struct *xcopy_wq = NULL;
+static sense_reason_t target_parse_xcopy_cmd(struct xcopy_op *xop);
+
static int target_xcopy_gen_naa_ieee(struct se_device *dev, unsigned char *buf)
{
int off = 0;
@@ -53,48 +55,60 @@
return 0;
}
-static int target_xcopy_locate_se_dev_e4(const unsigned char *dev_wwn,
- struct se_device **found_dev)
+struct xcopy_dev_search_info {
+ const unsigned char *dev_wwn;
+ struct se_device *found_dev;
+};
+
+static int target_xcopy_locate_se_dev_e4_iter(struct se_device *se_dev,
+ void *data)
{
- struct se_device *se_dev;
+ struct xcopy_dev_search_info *info = data;
unsigned char tmp_dev_wwn[XCOPY_NAA_IEEE_REGEX_LEN];
int rc;
- mutex_lock(&g_device_mutex);
- list_for_each_entry(se_dev, &g_device_list, g_dev_node) {
-
- if (!se_dev->dev_attrib.emulate_3pc)
- continue;
-
- memset(&tmp_dev_wwn[0], 0, XCOPY_NAA_IEEE_REGEX_LEN);
- target_xcopy_gen_naa_ieee(se_dev, &tmp_dev_wwn[0]);
-
- rc = memcmp(&tmp_dev_wwn[0], dev_wwn, XCOPY_NAA_IEEE_REGEX_LEN);
- if (rc != 0)
- continue;
-
- *found_dev = se_dev;
- pr_debug("XCOPY 0xe4: located se_dev: %p\n", se_dev);
-
- rc = target_depend_item(&se_dev->dev_group.cg_item);
- if (rc != 0) {
- pr_err("configfs_depend_item attempt failed:"
- " %d for se_dev: %p\n", rc, se_dev);
- mutex_unlock(&g_device_mutex);
- return rc;
- }
-
- pr_debug("Called configfs_depend_item for se_dev: %p"
- " se_dev->se_dev_group: %p\n", se_dev,
- &se_dev->dev_group);
-
- mutex_unlock(&g_device_mutex);
+ if (!se_dev->dev_attrib.emulate_3pc)
return 0;
- }
- mutex_unlock(&g_device_mutex);
- pr_debug_ratelimited("Unable to locate 0xe4 descriptor for EXTENDED_COPY\n");
- return -EINVAL;
+ memset(&tmp_dev_wwn[0], 0, XCOPY_NAA_IEEE_REGEX_LEN);
+ target_xcopy_gen_naa_ieee(se_dev, &tmp_dev_wwn[0]);
+
+ rc = memcmp(&tmp_dev_wwn[0], info->dev_wwn, XCOPY_NAA_IEEE_REGEX_LEN);
+ if (rc != 0)
+ return 0;
+
+ info->found_dev = se_dev;
+ pr_debug("XCOPY 0xe4: located se_dev: %p\n", se_dev);
+
+ rc = target_depend_item(&se_dev->dev_group.cg_item);
+ if (rc != 0) {
+ pr_err("configfs_depend_item attempt failed: %d for se_dev: %p\n",
+ rc, se_dev);
+ return rc;
+ }
+
+ pr_debug("Called configfs_depend_item for se_dev: %p se_dev->se_dev_group: %p\n",
+ se_dev, &se_dev->dev_group);
+ return 1;
+}
+
+static int target_xcopy_locate_se_dev_e4(const unsigned char *dev_wwn,
+ struct se_device **found_dev)
+{
+ struct xcopy_dev_search_info info;
+ int ret;
+
+ memset(&info, 0, sizeof(info));
+ info.dev_wwn = dev_wwn;
+
+ ret = target_for_each_device(target_xcopy_locate_se_dev_e4_iter, &info);
+ if (ret == 1) {
+ *found_dev = info.found_dev;
+ return 0;
+ } else {
+ pr_debug_ratelimited("Unable to locate 0xe4 descriptor for EXTENDED_COPY\n");
+ return -EINVAL;
+ }
}
static int target_xcopy_parse_tiddesc_e4(struct se_cmd *se_cmd, struct xcopy_op *xop,
@@ -311,9 +325,7 @@
(unsigned long long)xop->dst_lba);
if (dc != 0) {
- xop->dbl = (desc[29] & 0xff) << 16;
- xop->dbl |= (desc[30] & 0xff) << 8;
- xop->dbl |= desc[31] & 0xff;
+ xop->dbl = get_unaligned_be24(&desc[29]);
pr_debug("XCOPY seg desc 0x02: DC=1 w/ dbl: %u\n", xop->dbl);
}
@@ -781,13 +793,24 @@
static void target_xcopy_do_work(struct work_struct *work)
{
struct xcopy_op *xop = container_of(work, struct xcopy_op, xop_work);
- struct se_device *src_dev = xop->src_dev, *dst_dev = xop->dst_dev;
struct se_cmd *ec_cmd = xop->xop_se_cmd;
- sector_t src_lba = xop->src_lba, dst_lba = xop->dst_lba, end_lba;
+ struct se_device *src_dev, *dst_dev;
+ sector_t src_lba, dst_lba, end_lba;
unsigned int max_sectors;
- int rc;
- unsigned short nolb = xop->nolb, cur_nolb, max_nolb, copied_nolb = 0;
+ int rc = 0;
+ unsigned short nolb, cur_nolb, max_nolb, copied_nolb = 0;
+ if (target_parse_xcopy_cmd(xop) != TCM_NO_SENSE)
+ goto err_free;
+
+ if (WARN_ON_ONCE(!xop->src_dev) || WARN_ON_ONCE(!xop->dst_dev))
+ goto err_free;
+
+ src_dev = xop->src_dev;
+ dst_dev = xop->dst_dev;
+ src_lba = xop->src_lba;
+ dst_lba = xop->dst_lba;
+ nolb = xop->nolb;
end_lba = src_lba + nolb;
/*
* Break up XCOPY I/O into hw_max_sectors sized I/O based on the
@@ -855,6 +878,8 @@
out:
xcopy_pt_undepend_remotedev(xop);
+
+err_free:
kfree(xop);
/*
* Don't override an error scsi status if it has already been set
@@ -867,48 +892,22 @@
target_complete_cmd(ec_cmd, ec_cmd->scsi_status);
}
-sense_reason_t target_do_xcopy(struct se_cmd *se_cmd)
+/*
+ * Returns TCM_NO_SENSE upon success or a sense code != TCM_NO_SENSE if parsing
+ * fails.
+ */
+static sense_reason_t target_parse_xcopy_cmd(struct xcopy_op *xop)
{
- struct se_device *dev = se_cmd->se_dev;
- struct xcopy_op *xop = NULL;
+ struct se_cmd *se_cmd = xop->xop_se_cmd;
unsigned char *p = NULL, *seg_desc;
- unsigned int list_id, list_id_usage, sdll, inline_dl, sa;
+ unsigned int list_id, list_id_usage, sdll, inline_dl;
sense_reason_t ret = TCM_INVALID_PARAMETER_LIST;
int rc;
unsigned short tdll;
- if (!dev->dev_attrib.emulate_3pc) {
- pr_err("EXTENDED_COPY operation explicitly disabled\n");
- return TCM_UNSUPPORTED_SCSI_OPCODE;
- }
-
- sa = se_cmd->t_task_cdb[1] & 0x1f;
- if (sa != 0x00) {
- pr_err("EXTENDED_COPY(LID4) not supported\n");
- return TCM_UNSUPPORTED_SCSI_OPCODE;
- }
-
- if (se_cmd->data_length == 0) {
- target_complete_cmd(se_cmd, SAM_STAT_GOOD);
- return TCM_NO_SENSE;
- }
- if (se_cmd->data_length < XCOPY_HDR_LEN) {
- pr_err("XCOPY parameter truncation: length %u < hdr_len %u\n",
- se_cmd->data_length, XCOPY_HDR_LEN);
- return TCM_PARAMETER_LIST_LENGTH_ERROR;
- }
-
- xop = kzalloc(sizeof(struct xcopy_op), GFP_KERNEL);
- if (!xop) {
- pr_err("Unable to allocate xcopy_op\n");
- return TCM_OUT_OF_RESOURCES;
- }
- xop->xop_se_cmd = se_cmd;
-
p = transport_kmap_data_sg(se_cmd);
if (!p) {
pr_err("transport_kmap_data_sg() failed in target_do_xcopy\n");
- kfree(xop);
return TCM_OUT_OF_RESOURCES;
}
@@ -977,18 +976,57 @@
pr_debug("XCOPY: Processed %d target descriptors, length: %u\n", rc,
rc * XCOPY_TARGET_DESC_LEN);
transport_kunmap_data_sg(se_cmd);
-
- INIT_WORK(&xop->xop_work, target_xcopy_do_work);
- queue_work(xcopy_wq, &xop->xop_work);
return TCM_NO_SENSE;
out:
if (p)
transport_kunmap_data_sg(se_cmd);
- kfree(xop);
return ret;
}
+sense_reason_t target_do_xcopy(struct se_cmd *se_cmd)
+{
+ struct se_device *dev = se_cmd->se_dev;
+ struct xcopy_op *xop;
+ unsigned int sa;
+
+ if (!dev->dev_attrib.emulate_3pc) {
+ pr_err("EXTENDED_COPY operation explicitly disabled\n");
+ return TCM_UNSUPPORTED_SCSI_OPCODE;
+ }
+
+ sa = se_cmd->t_task_cdb[1] & 0x1f;
+ if (sa != 0x00) {
+ pr_err("EXTENDED_COPY(LID4) not supported\n");
+ return TCM_UNSUPPORTED_SCSI_OPCODE;
+ }
+
+ if (se_cmd->data_length == 0) {
+ target_complete_cmd(se_cmd, SAM_STAT_GOOD);
+ return TCM_NO_SENSE;
+ }
+ if (se_cmd->data_length < XCOPY_HDR_LEN) {
+ pr_err("XCOPY parameter truncation: length %u < hdr_len %u\n",
+ se_cmd->data_length, XCOPY_HDR_LEN);
+ return TCM_PARAMETER_LIST_LENGTH_ERROR;
+ }
+
+ xop = kzalloc(sizeof(struct xcopy_op), GFP_KERNEL);
+ if (!xop)
+ goto err;
+ xop->xop_se_cmd = se_cmd;
+ INIT_WORK(&xop->xop_work, target_xcopy_do_work);
+ if (WARN_ON_ONCE(!queue_work(xcopy_wq, &xop->xop_work)))
+ goto free;
+ return TCM_NO_SENSE;
+
+free:
+ kfree(xop);
+
+err:
+ return TCM_OUT_OF_RESOURCES;
+}
+
static sense_reason_t target_rcr_operating_parameters(struct se_cmd *se_cmd)
{
unsigned char *p;
diff --git a/drivers/thermal/broadcom/bcm2835_thermal.c b/drivers/thermal/broadcom/bcm2835_thermal.c
index 0ecf808..e6863c8 100644
--- a/drivers/thermal/broadcom/bcm2835_thermal.c
+++ b/drivers/thermal/broadcom/bcm2835_thermal.c
@@ -245,7 +245,6 @@
*/
err = tz->ops->get_trip_temp(tz, 0, &trip_temp);
if (err < 0) {
- err = PTR_ERR(tz);
dev_err(&pdev->dev,
"Not able to read trip_temp: %d\n",
err);
diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c
index 69d0f43..908a801 100644
--- a/drivers/thermal/cpu_cooling.c
+++ b/drivers/thermal/cpu_cooling.c
@@ -49,40 +49,45 @@
*/
/**
- * struct power_table - frequency to power conversion
+ * struct freq_table - frequency table along with power entries
* @frequency: frequency in KHz
* @power: power in mW
*
* This structure is built when the cooling device registers and helps
- * in translating frequency to power and viceversa.
+ * in translating frequency to power and vice versa.
*/
-struct power_table {
+struct freq_table {
u32 frequency;
u32 power;
};
/**
+ * struct time_in_idle - Idle time stats
+ * @time: previous reading of the absolute time that this cpu was idle
+ * @timestamp: wall time of the last invocation of get_cpu_idle_time_us()
+ */
+struct time_in_idle {
+ u64 time;
+ u64 timestamp;
+};
+
+/**
* struct cpufreq_cooling_device - data for cooling device with cpufreq
* @id: unique integer value corresponding to each cpufreq_cooling_device
* registered.
- * @cool_dev: thermal_cooling_device pointer to keep track of the
- * registered cooling device.
+ * @last_load: load measured by the latest call to cpufreq_get_requested_power()
* @cpufreq_state: integer value representing the current state of cpufreq
* cooling devices.
* @clipped_freq: integer value representing the absolute value of the clipped
* frequency.
* @max_level: maximum cooling level. One less than total number of valid
* cpufreq frequencies.
- * @allowed_cpus: all the cpus involved for this cpufreq_cooling_device.
+ * @freq_table: Freq table in descending order of frequencies
+ * @cdev: thermal_cooling_device pointer to keep track of the
+ * registered cooling device.
+ * @policy: cpufreq policy.
* @node: list_head to link all cpufreq_cooling_device together.
- * @last_load: load measured by the latest call to cpufreq_get_requested_power()
- * @time_in_idle: previous reading of the absolute time that this cpu was idle
- * @time_in_idle_timestamp: wall time of the last invocation of
- * get_cpu_idle_time_us()
- * @dyn_power_table: array of struct power_table for frequency to power
- * conversion, sorted in ascending order.
- * @dyn_power_table_entries: number of entries in the @dyn_power_table array
- * @cpu_dev: the first cpu_device from @allowed_cpus that has OPPs registered
+ * @idle_time: idle time stats
* @plat_get_static_power: callback to calculate the static power
*
* This structure is required for keeping information of each registered
@@ -90,81 +95,45 @@
*/
struct cpufreq_cooling_device {
int id;
- struct thermal_cooling_device *cool_dev;
+ u32 last_load;
unsigned int cpufreq_state;
unsigned int clipped_freq;
unsigned int max_level;
- unsigned int *freq_table; /* In descending order */
- struct cpumask allowed_cpus;
+ struct freq_table *freq_table; /* In descending order */
+ struct thermal_cooling_device *cdev;
+ struct cpufreq_policy *policy;
struct list_head node;
- u32 last_load;
- u64 *time_in_idle;
- u64 *time_in_idle_timestamp;
- struct power_table *dyn_power_table;
- int dyn_power_table_entries;
- struct device *cpu_dev;
+ struct time_in_idle *idle_time;
get_static_t plat_get_static_power;
};
-static DEFINE_IDA(cpufreq_ida);
+static DEFINE_IDA(cpufreq_ida);
static DEFINE_MUTEX(cooling_list_lock);
-static LIST_HEAD(cpufreq_dev_list);
+static LIST_HEAD(cpufreq_cdev_list);
/* Below code defines functions to be used for cpufreq as cooling device */
/**
* get_level: Find the level for a particular frequency
- * @cpufreq_dev: cpufreq_dev for which the property is required
+ * @cpufreq_cdev: cpufreq_cdev for which the property is required
* @freq: Frequency
*
- * Return: level on success, THERMAL_CSTATE_INVALID on error.
+ * Return: level corresponding to the frequency.
*/
-static unsigned long get_level(struct cpufreq_cooling_device *cpufreq_dev,
+static unsigned long get_level(struct cpufreq_cooling_device *cpufreq_cdev,
unsigned int freq)
{
+ struct freq_table *freq_table = cpufreq_cdev->freq_table;
unsigned long level;
- for (level = 0; level <= cpufreq_dev->max_level; level++) {
- if (freq == cpufreq_dev->freq_table[level])
- return level;
-
- if (freq > cpufreq_dev->freq_table[level])
+ for (level = 1; level <= cpufreq_cdev->max_level; level++)
+ if (freq > freq_table[level].frequency)
break;
- }
- return THERMAL_CSTATE_INVALID;
+ return level - 1;
}
/**
- * cpufreq_cooling_get_level - for a given cpu, return the cooling level.
- * @cpu: cpu for which the level is required
- * @freq: the frequency of interest
- *
- * This function will match the cooling level corresponding to the
- * requested @freq and return it.
- *
- * Return: The matched cooling level on success or THERMAL_CSTATE_INVALID
- * otherwise.
- */
-unsigned long cpufreq_cooling_get_level(unsigned int cpu, unsigned int freq)
-{
- struct cpufreq_cooling_device *cpufreq_dev;
-
- mutex_lock(&cooling_list_lock);
- list_for_each_entry(cpufreq_dev, &cpufreq_dev_list, node) {
- if (cpumask_test_cpu(cpu, &cpufreq_dev->allowed_cpus)) {
- mutex_unlock(&cooling_list_lock);
- return get_level(cpufreq_dev, freq);
- }
- }
- mutex_unlock(&cooling_list_lock);
-
- pr_err("%s: cpu:%d not part of any cooling device\n", __func__, cpu);
- return THERMAL_CSTATE_INVALID;
-}
-EXPORT_SYMBOL_GPL(cpufreq_cooling_get_level);
-
-/**
* cpufreq_thermal_notifier - notifier callback for cpufreq policy change.
* @nb: struct notifier_block * with callback info.
* @event: value showing cpufreq event for which this function invoked.
@@ -181,14 +150,18 @@
{
struct cpufreq_policy *policy = data;
unsigned long clipped_freq;
- struct cpufreq_cooling_device *cpufreq_dev;
+ struct cpufreq_cooling_device *cpufreq_cdev;
if (event != CPUFREQ_ADJUST)
return NOTIFY_DONE;
mutex_lock(&cooling_list_lock);
- list_for_each_entry(cpufreq_dev, &cpufreq_dev_list, node) {
- if (!cpumask_test_cpu(policy->cpu, &cpufreq_dev->allowed_cpus))
+ list_for_each_entry(cpufreq_cdev, &cpufreq_cdev_list, node) {
+ /*
+ * A new copy of the policy is sent to the notifier and can't
+ * compare that directly.
+ */
+ if (policy->cpu != cpufreq_cdev->policy->cpu)
continue;
/*
@@ -202,7 +175,7 @@
* But, if clipped_freq is greater than policy->max, we don't
* need to do anything.
*/
- clipped_freq = cpufreq_dev->clipped_freq;
+ clipped_freq = cpufreq_cdev->clipped_freq;
if (policy->max > clipped_freq)
cpufreq_verify_within_limits(policy, 0, clipped_freq);
@@ -214,63 +187,63 @@
}
/**
- * build_dyn_power_table() - create a dynamic power to frequency table
- * @cpufreq_device: the cpufreq cooling device in which to store the table
+ * update_freq_table() - Update the freq table with power numbers
+ * @cpufreq_cdev: the cpufreq cooling device in which to update the table
* @capacitance: dynamic power coefficient for these cpus
*
- * Build a dynamic power to frequency table for this cpu and store it
- * in @cpufreq_device. This table will be used in cpu_power_to_freq() and
- * cpu_freq_to_power() to convert between power and frequency
- * efficiently. Power is stored in mW, frequency in KHz. The
- * resulting table is in ascending order.
+ * Update the freq table with power numbers. This table will be used in
+ * cpu_power_to_freq() and cpu_freq_to_power() to convert between power and
+ * frequency efficiently. Power is stored in mW, frequency in KHz. The
+ * resulting table is in descending order.
*
* Return: 0 on success, -EINVAL if there are no OPPs for any CPUs,
- * -ENOMEM if we run out of memory or -EAGAIN if an OPP was
- * added/enabled while the function was executing.
+ * or -ENOMEM if we run out of memory.
*/
-static int build_dyn_power_table(struct cpufreq_cooling_device *cpufreq_device,
- u32 capacitance)
+static int update_freq_table(struct cpufreq_cooling_device *cpufreq_cdev,
+ u32 capacitance)
{
- struct power_table *power_table;
+ struct freq_table *freq_table = cpufreq_cdev->freq_table;
struct dev_pm_opp *opp;
struct device *dev = NULL;
- int num_opps = 0, cpu, i, ret = 0;
- unsigned long freq;
+ int num_opps = 0, cpu = cpufreq_cdev->policy->cpu, i;
- for_each_cpu(cpu, &cpufreq_device->allowed_cpus) {
- dev = get_cpu_device(cpu);
- if (!dev) {
- dev_warn(&cpufreq_device->cool_dev->device,
- "No cpu device for cpu %d\n", cpu);
- continue;
- }
-
- num_opps = dev_pm_opp_get_opp_count(dev);
- if (num_opps > 0)
- break;
- else if (num_opps < 0)
- return num_opps;
+ dev = get_cpu_device(cpu);
+ if (unlikely(!dev)) {
+ dev_warn(&cpufreq_cdev->cdev->device,
+ "No cpu device for cpu %d\n", cpu);
+ return -ENODEV;
}
- if (num_opps == 0)
+ num_opps = dev_pm_opp_get_opp_count(dev);
+ if (num_opps < 0)
+ return num_opps;
+
+ /*
+ * The cpufreq table is also built from the OPP table and so the count
+ * should match.
+ */
+ if (num_opps != cpufreq_cdev->max_level + 1) {
+ dev_warn(dev, "Number of OPPs not matching with max_levels\n");
return -EINVAL;
+ }
- power_table = kcalloc(num_opps, sizeof(*power_table), GFP_KERNEL);
- if (!power_table)
- return -ENOMEM;
-
- for (freq = 0, i = 0;
- opp = dev_pm_opp_find_freq_ceil(dev, &freq), !IS_ERR(opp);
- freq++, i++) {
- u32 freq_mhz, voltage_mv;
+ for (i = 0; i <= cpufreq_cdev->max_level; i++) {
+ unsigned long freq = freq_table[i].frequency * 1000;
+ u32 freq_mhz = freq_table[i].frequency / 1000;
u64 power;
+ u32 voltage_mv;
- if (i >= num_opps) {
- ret = -EAGAIN;
- goto free_power_table;
+ /*
+ * Find ceil frequency as 'freq' may be slightly lower than OPP
+ * freq due to truncation while converting to kHz.
+ */
+ opp = dev_pm_opp_find_freq_ceil(dev, &freq);
+ if (IS_ERR(opp)) {
+ dev_err(dev, "failed to get opp for %lu frequency\n",
+ freq);
+ return -EINVAL;
}
- freq_mhz = freq / 1000000;
voltage_mv = dev_pm_opp_get_voltage(opp) / 1000;
dev_pm_opp_put(opp);
@@ -281,89 +254,73 @@
power = (u64)capacitance * freq_mhz * voltage_mv * voltage_mv;
do_div(power, 1000000000);
- /* frequency is stored in power_table in KHz */
- power_table[i].frequency = freq / 1000;
-
/* power is stored in mW */
- power_table[i].power = power;
+ freq_table[i].power = power;
}
- if (i != num_opps) {
- ret = PTR_ERR(opp);
- goto free_power_table;
- }
-
- cpufreq_device->cpu_dev = dev;
- cpufreq_device->dyn_power_table = power_table;
- cpufreq_device->dyn_power_table_entries = i;
-
return 0;
-
-free_power_table:
- kfree(power_table);
-
- return ret;
}
-static u32 cpu_freq_to_power(struct cpufreq_cooling_device *cpufreq_device,
+static u32 cpu_freq_to_power(struct cpufreq_cooling_device *cpufreq_cdev,
u32 freq)
{
int i;
- struct power_table *pt = cpufreq_device->dyn_power_table;
+ struct freq_table *freq_table = cpufreq_cdev->freq_table;
- for (i = 1; i < cpufreq_device->dyn_power_table_entries; i++)
- if (freq < pt[i].frequency)
+ for (i = 1; i <= cpufreq_cdev->max_level; i++)
+ if (freq > freq_table[i].frequency)
break;
- return pt[i - 1].power;
+ return freq_table[i - 1].power;
}
-static u32 cpu_power_to_freq(struct cpufreq_cooling_device *cpufreq_device,
+static u32 cpu_power_to_freq(struct cpufreq_cooling_device *cpufreq_cdev,
u32 power)
{
int i;
- struct power_table *pt = cpufreq_device->dyn_power_table;
+ struct freq_table *freq_table = cpufreq_cdev->freq_table;
- for (i = 1; i < cpufreq_device->dyn_power_table_entries; i++)
- if (power < pt[i].power)
+ for (i = 1; i <= cpufreq_cdev->max_level; i++)
+ if (power > freq_table[i].power)
break;
- return pt[i - 1].frequency;
+ return freq_table[i - 1].frequency;
}
/**
* get_load() - get load for a cpu since last updated
- * @cpufreq_device: &struct cpufreq_cooling_device for this cpu
+ * @cpufreq_cdev: &struct cpufreq_cooling_device for this cpu
* @cpu: cpu number
- * @cpu_idx: index of the cpu in cpufreq_device->allowed_cpus
+ * @cpu_idx: index of the cpu in time_in_idle*
*
* Return: The average load of cpu @cpu in percentage since this
* function was last called.
*/
-static u32 get_load(struct cpufreq_cooling_device *cpufreq_device, int cpu,
+static u32 get_load(struct cpufreq_cooling_device *cpufreq_cdev, int cpu,
int cpu_idx)
{
u32 load;
u64 now, now_idle, delta_time, delta_idle;
+ struct time_in_idle *idle_time = &cpufreq_cdev->idle_time[cpu_idx];
now_idle = get_cpu_idle_time(cpu, &now, 0);
- delta_idle = now_idle - cpufreq_device->time_in_idle[cpu_idx];
- delta_time = now - cpufreq_device->time_in_idle_timestamp[cpu_idx];
+ delta_idle = now_idle - idle_time->time;
+ delta_time = now - idle_time->timestamp;
if (delta_time <= delta_idle)
load = 0;
else
load = div64_u64(100 * (delta_time - delta_idle), delta_time);
- cpufreq_device->time_in_idle[cpu_idx] = now_idle;
- cpufreq_device->time_in_idle_timestamp[cpu_idx] = now;
+ idle_time->time = now_idle;
+ idle_time->timestamp = now;
return load;
}
/**
* get_static_power() - calculate the static power consumed by the cpus
- * @cpufreq_device: struct &cpufreq_cooling_device for this cpu cdev
+ * @cpufreq_cdev: struct &cpufreq_cooling_device for this cpu cdev
* @tz: thermal zone device in which we're operating
* @freq: frequency in KHz
* @power: pointer in which to store the calculated static power
@@ -376,26 +333,28 @@
*
* Return: 0 on success, -E* on failure.
*/
-static int get_static_power(struct cpufreq_cooling_device *cpufreq_device,
+static int get_static_power(struct cpufreq_cooling_device *cpufreq_cdev,
struct thermal_zone_device *tz, unsigned long freq,
u32 *power)
{
struct dev_pm_opp *opp;
unsigned long voltage;
- struct cpumask *cpumask = &cpufreq_device->allowed_cpus;
+ struct cpufreq_policy *policy = cpufreq_cdev->policy;
+ struct cpumask *cpumask = policy->related_cpus;
unsigned long freq_hz = freq * 1000;
+ struct device *dev;
- if (!cpufreq_device->plat_get_static_power ||
- !cpufreq_device->cpu_dev) {
+ if (!cpufreq_cdev->plat_get_static_power) {
*power = 0;
return 0;
}
- opp = dev_pm_opp_find_freq_exact(cpufreq_device->cpu_dev, freq_hz,
- true);
+ dev = get_cpu_device(policy->cpu);
+ WARN_ON(!dev);
+
+ opp = dev_pm_opp_find_freq_exact(dev, freq_hz, true);
if (IS_ERR(opp)) {
- dev_warn_ratelimited(cpufreq_device->cpu_dev,
- "Failed to find OPP for frequency %lu: %ld\n",
+ dev_warn_ratelimited(dev, "Failed to find OPP for frequency %lu: %ld\n",
freq_hz, PTR_ERR(opp));
return -EINVAL;
}
@@ -404,31 +363,30 @@
dev_pm_opp_put(opp);
if (voltage == 0) {
- dev_err_ratelimited(cpufreq_device->cpu_dev,
- "Failed to get voltage for frequency %lu\n",
+ dev_err_ratelimited(dev, "Failed to get voltage for frequency %lu\n",
freq_hz);
return -EINVAL;
}
- return cpufreq_device->plat_get_static_power(cpumask, tz->passive_delay,
- voltage, power);
+ return cpufreq_cdev->plat_get_static_power(cpumask, tz->passive_delay,
+ voltage, power);
}
/**
* get_dynamic_power() - calculate the dynamic power
- * @cpufreq_device: &cpufreq_cooling_device for this cdev
+ * @cpufreq_cdev: &cpufreq_cooling_device for this cdev
* @freq: current frequency
*
* Return: the dynamic power consumed by the cpus described by
- * @cpufreq_device.
+ * @cpufreq_cdev.
*/
-static u32 get_dynamic_power(struct cpufreq_cooling_device *cpufreq_device,
+static u32 get_dynamic_power(struct cpufreq_cooling_device *cpufreq_cdev,
unsigned long freq)
{
u32 raw_cpu_power;
- raw_cpu_power = cpu_freq_to_power(cpufreq_device, freq);
- return (raw_cpu_power * cpufreq_device->last_load) / 100;
+ raw_cpu_power = cpu_freq_to_power(cpufreq_cdev, freq);
+ return (raw_cpu_power * cpufreq_cdev->last_load) / 100;
}
/* cpufreq cooling device callback functions are defined below */
@@ -446,9 +404,9 @@
static int cpufreq_get_max_state(struct thermal_cooling_device *cdev,
unsigned long *state)
{
- struct cpufreq_cooling_device *cpufreq_device = cdev->devdata;
+ struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata;
- *state = cpufreq_device->max_level;
+ *state = cpufreq_cdev->max_level;
return 0;
}
@@ -465,9 +423,9 @@
static int cpufreq_get_cur_state(struct thermal_cooling_device *cdev,
unsigned long *state)
{
- struct cpufreq_cooling_device *cpufreq_device = cdev->devdata;
+ struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata;
- *state = cpufreq_device->cpufreq_state;
+ *state = cpufreq_cdev->cpufreq_state;
return 0;
}
@@ -485,23 +443,22 @@
static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev,
unsigned long state)
{
- struct cpufreq_cooling_device *cpufreq_device = cdev->devdata;
- unsigned int cpu = cpumask_any(&cpufreq_device->allowed_cpus);
+ struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata;
unsigned int clip_freq;
/* Request state should be less than max_level */
- if (WARN_ON(state > cpufreq_device->max_level))
+ if (WARN_ON(state > cpufreq_cdev->max_level))
return -EINVAL;
/* Check if the old cooling action is same as new cooling action */
- if (cpufreq_device->cpufreq_state == state)
+ if (cpufreq_cdev->cpufreq_state == state)
return 0;
- clip_freq = cpufreq_device->freq_table[state];
- cpufreq_device->cpufreq_state = state;
- cpufreq_device->clipped_freq = clip_freq;
+ clip_freq = cpufreq_cdev->freq_table[state].frequency;
+ cpufreq_cdev->cpufreq_state = state;
+ cpufreq_cdev->clipped_freq = clip_freq;
- cpufreq_update_policy(cpu);
+ cpufreq_update_policy(cpufreq_cdev->policy->cpu);
return 0;
}
@@ -536,33 +493,23 @@
unsigned long freq;
int i = 0, cpu, ret;
u32 static_power, dynamic_power, total_load = 0;
- struct cpufreq_cooling_device *cpufreq_device = cdev->devdata;
+ struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata;
+ struct cpufreq_policy *policy = cpufreq_cdev->policy;
u32 *load_cpu = NULL;
- cpu = cpumask_any_and(&cpufreq_device->allowed_cpus, cpu_online_mask);
-
- /*
- * All the CPUs are offline, thus the requested power by
- * the cdev is 0
- */
- if (cpu >= nr_cpu_ids) {
- *power = 0;
- return 0;
- }
-
- freq = cpufreq_quick_get(cpu);
+ freq = cpufreq_quick_get(policy->cpu);
if (trace_thermal_power_cpu_get_power_enabled()) {
- u32 ncpus = cpumask_weight(&cpufreq_device->allowed_cpus);
+ u32 ncpus = cpumask_weight(policy->related_cpus);
load_cpu = kcalloc(ncpus, sizeof(*load_cpu), GFP_KERNEL);
}
- for_each_cpu(cpu, &cpufreq_device->allowed_cpus) {
+ for_each_cpu(cpu, policy->related_cpus) {
u32 load;
if (cpu_online(cpu))
- load = get_load(cpufreq_device, cpu, i);
+ load = get_load(cpufreq_cdev, cpu, i);
else
load = 0;
@@ -573,19 +520,19 @@
i++;
}
- cpufreq_device->last_load = total_load;
+ cpufreq_cdev->last_load = total_load;
- dynamic_power = get_dynamic_power(cpufreq_device, freq);
- ret = get_static_power(cpufreq_device, tz, freq, &static_power);
+ dynamic_power = get_dynamic_power(cpufreq_cdev, freq);
+ ret = get_static_power(cpufreq_cdev, tz, freq, &static_power);
if (ret) {
kfree(load_cpu);
return ret;
}
if (load_cpu) {
- trace_thermal_power_cpu_get_power(
- &cpufreq_device->allowed_cpus,
- freq, load_cpu, i, dynamic_power, static_power);
+ trace_thermal_power_cpu_get_power(policy->related_cpus, freq,
+ load_cpu, i, dynamic_power,
+ static_power);
kfree(load_cpu);
}
@@ -614,38 +561,23 @@
unsigned long state, u32 *power)
{
unsigned int freq, num_cpus;
- cpumask_var_t cpumask;
u32 static_power, dynamic_power;
int ret;
- struct cpufreq_cooling_device *cpufreq_device = cdev->devdata;
+ struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata;
- if (!alloc_cpumask_var(&cpumask, GFP_KERNEL))
- return -ENOMEM;
+ /* Request state should be less than max_level */
+ if (WARN_ON(state > cpufreq_cdev->max_level))
+ return -EINVAL;
- cpumask_and(cpumask, &cpufreq_device->allowed_cpus, cpu_online_mask);
- num_cpus = cpumask_weight(cpumask);
+ num_cpus = cpumask_weight(cpufreq_cdev->policy->cpus);
- /* None of our cpus are online, so no power */
- if (num_cpus == 0) {
- *power = 0;
- ret = 0;
- goto out;
- }
-
- freq = cpufreq_device->freq_table[state];
- if (!freq) {
- ret = -EINVAL;
- goto out;
- }
-
- dynamic_power = cpu_freq_to_power(cpufreq_device, freq) * num_cpus;
- ret = get_static_power(cpufreq_device, tz, freq, &static_power);
+ freq = cpufreq_cdev->freq_table[state].frequency;
+ dynamic_power = cpu_freq_to_power(cpufreq_cdev, freq) * num_cpus;
+ ret = get_static_power(cpufreq_cdev, tz, freq, &static_power);
if (ret)
- goto out;
+ return ret;
*power = static_power + dynamic_power;
-out:
- free_cpumask_var(cpumask);
return ret;
}
@@ -673,39 +605,27 @@
struct thermal_zone_device *tz, u32 power,
unsigned long *state)
{
- unsigned int cpu, cur_freq, target_freq;
+ unsigned int cur_freq, target_freq;
int ret;
s32 dyn_power;
u32 last_load, normalised_power, static_power;
- struct cpufreq_cooling_device *cpufreq_device = cdev->devdata;
+ struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata;
+ struct cpufreq_policy *policy = cpufreq_cdev->policy;
- cpu = cpumask_any_and(&cpufreq_device->allowed_cpus, cpu_online_mask);
-
- /* None of our cpus are online */
- if (cpu >= nr_cpu_ids)
- return -ENODEV;
-
- cur_freq = cpufreq_quick_get(cpu);
- ret = get_static_power(cpufreq_device, tz, cur_freq, &static_power);
+ cur_freq = cpufreq_quick_get(policy->cpu);
+ ret = get_static_power(cpufreq_cdev, tz, cur_freq, &static_power);
if (ret)
return ret;
dyn_power = power - static_power;
dyn_power = dyn_power > 0 ? dyn_power : 0;
- last_load = cpufreq_device->last_load ?: 1;
+ last_load = cpufreq_cdev->last_load ?: 1;
normalised_power = (dyn_power * 100) / last_load;
- target_freq = cpu_power_to_freq(cpufreq_device, normalised_power);
+ target_freq = cpu_power_to_freq(cpufreq_cdev, normalised_power);
- *state = cpufreq_cooling_get_level(cpu, target_freq);
- if (*state == THERMAL_CSTATE_INVALID) {
- dev_err_ratelimited(&cdev->device,
- "Failed to convert %dKHz for cpu %d into a cdev state\n",
- target_freq, cpu);
- return -EINVAL;
- }
-
- trace_thermal_power_cpu_limit(&cpufreq_device->allowed_cpus,
- target_freq, *state, power);
+ *state = get_level(cpufreq_cdev, target_freq);
+ trace_thermal_power_cpu_limit(policy->related_cpus, target_freq, *state,
+ power);
return 0;
}
@@ -748,7 +668,7 @@
/**
* __cpufreq_cooling_register - helper function to create cpufreq cooling device
* @np: a valid struct device_node to the cooling device device tree node
- * @clip_cpus: cpumask of cpus where the frequency constraints will happen.
+ * @policy: cpufreq policy
* Normally this should be same as cpufreq policy->related_cpus.
* @capacitance: dynamic power coefficient for these cpus
* @plat_static_func: function to calculate the static power consumed by these
@@ -764,102 +684,68 @@
*/
static struct thermal_cooling_device *
__cpufreq_cooling_register(struct device_node *np,
- const struct cpumask *clip_cpus, u32 capacitance,
+ struct cpufreq_policy *policy, u32 capacitance,
get_static_t plat_static_func)
{
- struct cpufreq_policy *policy;
- struct thermal_cooling_device *cool_dev;
- struct cpufreq_cooling_device *cpufreq_dev;
+ struct thermal_cooling_device *cdev;
+ struct cpufreq_cooling_device *cpufreq_cdev;
char dev_name[THERMAL_NAME_LENGTH];
- struct cpufreq_frequency_table *pos, *table;
- cpumask_var_t temp_mask;
unsigned int freq, i, num_cpus;
int ret;
struct thermal_cooling_device_ops *cooling_ops;
bool first;
- if (!alloc_cpumask_var(&temp_mask, GFP_KERNEL))
+ if (IS_ERR_OR_NULL(policy)) {
+ pr_err("%s: cpufreq policy isn't valid: %p", __func__, policy);
+ return ERR_PTR(-EINVAL);
+ }
+
+ i = cpufreq_table_count_valid_entries(policy);
+ if (!i) {
+ pr_debug("%s: CPUFreq table not found or has no valid entries\n",
+ __func__);
+ return ERR_PTR(-ENODEV);
+ }
+
+ cpufreq_cdev = kzalloc(sizeof(*cpufreq_cdev), GFP_KERNEL);
+ if (!cpufreq_cdev)
return ERR_PTR(-ENOMEM);
- cpumask_and(temp_mask, clip_cpus, cpu_online_mask);
- policy = cpufreq_cpu_get(cpumask_first(temp_mask));
- if (!policy) {
- pr_debug("%s: CPUFreq policy not found\n", __func__);
- cool_dev = ERR_PTR(-EPROBE_DEFER);
- goto free_cpumask;
- }
-
- table = policy->freq_table;
- if (!table) {
- pr_debug("%s: CPUFreq table not found\n", __func__);
- cool_dev = ERR_PTR(-ENODEV);
- goto put_policy;
- }
-
- cpufreq_dev = kzalloc(sizeof(*cpufreq_dev), GFP_KERNEL);
- if (!cpufreq_dev) {
- cool_dev = ERR_PTR(-ENOMEM);
- goto put_policy;
- }
-
- num_cpus = cpumask_weight(clip_cpus);
- cpufreq_dev->time_in_idle = kcalloc(num_cpus,
- sizeof(*cpufreq_dev->time_in_idle),
- GFP_KERNEL);
- if (!cpufreq_dev->time_in_idle) {
- cool_dev = ERR_PTR(-ENOMEM);
+ cpufreq_cdev->policy = policy;
+ num_cpus = cpumask_weight(policy->related_cpus);
+ cpufreq_cdev->idle_time = kcalloc(num_cpus,
+ sizeof(*cpufreq_cdev->idle_time),
+ GFP_KERNEL);
+ if (!cpufreq_cdev->idle_time) {
+ cdev = ERR_PTR(-ENOMEM);
goto free_cdev;
}
- cpufreq_dev->time_in_idle_timestamp =
- kcalloc(num_cpus, sizeof(*cpufreq_dev->time_in_idle_timestamp),
- GFP_KERNEL);
- if (!cpufreq_dev->time_in_idle_timestamp) {
- cool_dev = ERR_PTR(-ENOMEM);
- goto free_time_in_idle;
- }
-
- /* Find max levels */
- cpufreq_for_each_valid_entry(pos, table)
- cpufreq_dev->max_level++;
-
- cpufreq_dev->freq_table = kmalloc(sizeof(*cpufreq_dev->freq_table) *
- cpufreq_dev->max_level, GFP_KERNEL);
- if (!cpufreq_dev->freq_table) {
- cool_dev = ERR_PTR(-ENOMEM);
- goto free_time_in_idle_timestamp;
- }
-
/* max_level is an index, not a counter */
- cpufreq_dev->max_level--;
+ cpufreq_cdev->max_level = i - 1;
- cpumask_copy(&cpufreq_dev->allowed_cpus, clip_cpus);
-
- if (capacitance) {
- cpufreq_dev->plat_get_static_power = plat_static_func;
-
- ret = build_dyn_power_table(cpufreq_dev, capacitance);
- if (ret) {
- cool_dev = ERR_PTR(ret);
- goto free_table;
- }
-
- cooling_ops = &cpufreq_power_cooling_ops;
- } else {
- cooling_ops = &cpufreq_cooling_ops;
+ cpufreq_cdev->freq_table = kmalloc_array(i,
+ sizeof(*cpufreq_cdev->freq_table),
+ GFP_KERNEL);
+ if (!cpufreq_cdev->freq_table) {
+ cdev = ERR_PTR(-ENOMEM);
+ goto free_idle_time;
}
ret = ida_simple_get(&cpufreq_ida, 0, 0, GFP_KERNEL);
if (ret < 0) {
- cool_dev = ERR_PTR(ret);
- goto free_power_table;
+ cdev = ERR_PTR(ret);
+ goto free_table;
}
- cpufreq_dev->id = ret;
+ cpufreq_cdev->id = ret;
+
+ snprintf(dev_name, sizeof(dev_name), "thermal-cpufreq-%d",
+ cpufreq_cdev->id);
/* Fill freq-table in descending order of frequencies */
- for (i = 0, freq = -1; i <= cpufreq_dev->max_level; i++) {
- freq = find_next_max(table, freq);
- cpufreq_dev->freq_table[i] = freq;
+ for (i = 0, freq = -1; i <= cpufreq_cdev->max_level; i++) {
+ freq = find_next_max(policy->freq_table, freq);
+ cpufreq_cdev->freq_table[i].frequency = freq;
/* Warn for duplicate entries */
if (!freq)
@@ -868,51 +754,54 @@
pr_debug("%s: freq:%u KHz\n", __func__, freq);
}
- snprintf(dev_name, sizeof(dev_name), "thermal-cpufreq-%d",
- cpufreq_dev->id);
+ if (capacitance) {
+ cpufreq_cdev->plat_get_static_power = plat_static_func;
- cool_dev = thermal_of_cooling_device_register(np, dev_name, cpufreq_dev,
- cooling_ops);
- if (IS_ERR(cool_dev))
+ ret = update_freq_table(cpufreq_cdev, capacitance);
+ if (ret) {
+ cdev = ERR_PTR(ret);
+ goto remove_ida;
+ }
+
+ cooling_ops = &cpufreq_power_cooling_ops;
+ } else {
+ cooling_ops = &cpufreq_cooling_ops;
+ }
+
+ cdev = thermal_of_cooling_device_register(np, dev_name, cpufreq_cdev,
+ cooling_ops);
+ if (IS_ERR(cdev))
goto remove_ida;
- cpufreq_dev->clipped_freq = cpufreq_dev->freq_table[0];
- cpufreq_dev->cool_dev = cool_dev;
+ cpufreq_cdev->clipped_freq = cpufreq_cdev->freq_table[0].frequency;
+ cpufreq_cdev->cdev = cdev;
mutex_lock(&cooling_list_lock);
/* Register the notifier for first cpufreq cooling device */
- first = list_empty(&cpufreq_dev_list);
- list_add(&cpufreq_dev->node, &cpufreq_dev_list);
+ first = list_empty(&cpufreq_cdev_list);
+ list_add(&cpufreq_cdev->node, &cpufreq_cdev_list);
mutex_unlock(&cooling_list_lock);
if (first)
cpufreq_register_notifier(&thermal_cpufreq_notifier_block,
CPUFREQ_POLICY_NOTIFIER);
- goto put_policy;
+ return cdev;
remove_ida:
- ida_simple_remove(&cpufreq_ida, cpufreq_dev->id);
-free_power_table:
- kfree(cpufreq_dev->dyn_power_table);
+ ida_simple_remove(&cpufreq_ida, cpufreq_cdev->id);
free_table:
- kfree(cpufreq_dev->freq_table);
-free_time_in_idle_timestamp:
- kfree(cpufreq_dev->time_in_idle_timestamp);
-free_time_in_idle:
- kfree(cpufreq_dev->time_in_idle);
+ kfree(cpufreq_cdev->freq_table);
+free_idle_time:
+ kfree(cpufreq_cdev->idle_time);
free_cdev:
- kfree(cpufreq_dev);
-put_policy:
- cpufreq_cpu_put(policy);
-free_cpumask:
- free_cpumask_var(temp_mask);
- return cool_dev;
+ kfree(cpufreq_cdev);
+ return cdev;
}
/**
* cpufreq_cooling_register - function to create cpufreq cooling device.
- * @clip_cpus: cpumask of cpus where the frequency constraints will happen.
+ * @policy: cpufreq policy
*
* This interface function registers the cpufreq cooling device with the name
* "thermal-cpufreq-%x". This api can support multiple instances of cpufreq
@@ -922,16 +811,16 @@
* on failure, it returns a corresponding ERR_PTR().
*/
struct thermal_cooling_device *
-cpufreq_cooling_register(const struct cpumask *clip_cpus)
+cpufreq_cooling_register(struct cpufreq_policy *policy)
{
- return __cpufreq_cooling_register(NULL, clip_cpus, 0, NULL);
+ return __cpufreq_cooling_register(NULL, policy, 0, NULL);
}
EXPORT_SYMBOL_GPL(cpufreq_cooling_register);
/**
* of_cpufreq_cooling_register - function to create cpufreq cooling device.
* @np: a valid struct device_node to the cooling device device tree node
- * @clip_cpus: cpumask of cpus where the frequency constraints will happen.
+ * @policy: cpufreq policy
*
* This interface function registers the cpufreq cooling device with the name
* "thermal-cpufreq-%x". This api can support multiple instances of cpufreq
@@ -943,18 +832,18 @@
*/
struct thermal_cooling_device *
of_cpufreq_cooling_register(struct device_node *np,
- const struct cpumask *clip_cpus)
+ struct cpufreq_policy *policy)
{
if (!np)
return ERR_PTR(-EINVAL);
- return __cpufreq_cooling_register(np, clip_cpus, 0, NULL);
+ return __cpufreq_cooling_register(np, policy, 0, NULL);
}
EXPORT_SYMBOL_GPL(of_cpufreq_cooling_register);
/**
* cpufreq_power_cooling_register() - create cpufreq cooling device with power extensions
- * @clip_cpus: cpumask of cpus where the frequency constraints will happen
+ * @policy: cpufreq policy
* @capacitance: dynamic power coefficient for these cpus
* @plat_static_func: function to calculate the static power consumed by these
* cpus (optional)
@@ -974,10 +863,10 @@
* on failure, it returns a corresponding ERR_PTR().
*/
struct thermal_cooling_device *
-cpufreq_power_cooling_register(const struct cpumask *clip_cpus, u32 capacitance,
+cpufreq_power_cooling_register(struct cpufreq_policy *policy, u32 capacitance,
get_static_t plat_static_func)
{
- return __cpufreq_cooling_register(NULL, clip_cpus, capacitance,
+ return __cpufreq_cooling_register(NULL, policy, capacitance,
plat_static_func);
}
EXPORT_SYMBOL(cpufreq_power_cooling_register);
@@ -985,7 +874,7 @@
/**
* of_cpufreq_power_cooling_register() - create cpufreq cooling device with power extensions
* @np: a valid struct device_node to the cooling device device tree node
- * @clip_cpus: cpumask of cpus where the frequency constraints will happen
+ * @policy: cpufreq policy
* @capacitance: dynamic power coefficient for these cpus
* @plat_static_func: function to calculate the static power consumed by these
* cpus (optional)
@@ -1007,14 +896,14 @@
*/
struct thermal_cooling_device *
of_cpufreq_power_cooling_register(struct device_node *np,
- const struct cpumask *clip_cpus,
+ struct cpufreq_policy *policy,
u32 capacitance,
get_static_t plat_static_func)
{
if (!np)
return ERR_PTR(-EINVAL);
- return __cpufreq_cooling_register(np, clip_cpus, capacitance,
+ return __cpufreq_cooling_register(np, policy, capacitance,
plat_static_func);
}
EXPORT_SYMBOL(of_cpufreq_power_cooling_register);
@@ -1027,30 +916,28 @@
*/
void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
{
- struct cpufreq_cooling_device *cpufreq_dev;
+ struct cpufreq_cooling_device *cpufreq_cdev;
bool last;
if (!cdev)
return;
- cpufreq_dev = cdev->devdata;
+ cpufreq_cdev = cdev->devdata;
mutex_lock(&cooling_list_lock);
- list_del(&cpufreq_dev->node);
+ list_del(&cpufreq_cdev->node);
/* Unregister the notifier for the last cpufreq cooling device */
- last = list_empty(&cpufreq_dev_list);
+ last = list_empty(&cpufreq_cdev_list);
mutex_unlock(&cooling_list_lock);
if (last)
cpufreq_unregister_notifier(&thermal_cpufreq_notifier_block,
CPUFREQ_POLICY_NOTIFIER);
- thermal_cooling_device_unregister(cpufreq_dev->cool_dev);
- ida_simple_remove(&cpufreq_ida, cpufreq_dev->id);
- kfree(cpufreq_dev->dyn_power_table);
- kfree(cpufreq_dev->time_in_idle_timestamp);
- kfree(cpufreq_dev->time_in_idle);
- kfree(cpufreq_dev->freq_table);
- kfree(cpufreq_dev);
+ thermal_cooling_device_unregister(cpufreq_cdev->cdev);
+ ida_simple_remove(&cpufreq_ida, cpufreq_cdev->id);
+ kfree(cpufreq_cdev->idle_time);
+ kfree(cpufreq_cdev->freq_table);
+ kfree(cpufreq_cdev);
}
EXPORT_SYMBOL_GPL(cpufreq_cooling_unregister);
diff --git a/drivers/thermal/fair_share.c b/drivers/thermal/fair_share.c
index 68bd1b5..d3469fb 100644
--- a/drivers/thermal/fair_share.c
+++ b/drivers/thermal/fair_share.c
@@ -71,6 +71,7 @@
/**
* fair_share_throttle - throttles devices associated with the given zone
* @tz - thermal_zone_device
+ * @trip - trip point index
*
* Throttling Logic: This uses three parameters to calculate the new
* throttle state of the cooling devices associated with the given zone.
diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c
index f642966..9c3ce34 100644
--- a/drivers/thermal/hisi_thermal.c
+++ b/drivers/thermal/hisi_thermal.c
@@ -397,8 +397,11 @@
static int hisi_thermal_resume(struct device *dev)
{
struct hisi_thermal_data *data = dev_get_drvdata(dev);
+ int ret;
- clk_prepare_enable(data->clk);
+ ret = clk_prepare_enable(data->clk);
+ if (ret)
+ return ret;
data->irq_enabled = true;
hisi_thermal_enable_bind_irq_sensor(data);
diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index fb648a4..4798b4b 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -8,6 +8,7 @@
*/
#include <linux/clk.h>
+#include <linux/cpufreq.h>
#include <linux/cpu_cooling.h>
#include <linux/delay.h>
#include <linux/device.h>
@@ -88,6 +89,7 @@
};
struct imx_thermal_data {
+ struct cpufreq_policy *policy;
struct thermal_zone_device *tz;
struct thermal_cooling_device *cdev;
enum thermal_device_mode mode;
@@ -525,13 +527,18 @@
regmap_write(map, MISC0 + REG_SET, MISC0_REFTOP_SELBIASOFF);
regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN);
- data->cdev = cpufreq_cooling_register(cpu_present_mask);
+ data->policy = cpufreq_cpu_get(0);
+ if (!data->policy) {
+ pr_debug("%s: CPUFreq policy not found\n", __func__);
+ return -EPROBE_DEFER;
+ }
+
+ data->cdev = cpufreq_cooling_register(data->policy);
if (IS_ERR(data->cdev)) {
ret = PTR_ERR(data->cdev);
- if (ret != -EPROBE_DEFER)
- dev_err(&pdev->dev,
- "failed to register cpufreq cooling device: %d\n",
- ret);
+ dev_err(&pdev->dev,
+ "failed to register cpufreq cooling device: %d\n", ret);
+ cpufreq_cpu_put(data->policy);
return ret;
}
@@ -542,6 +549,7 @@
dev_err(&pdev->dev,
"failed to get thermal clk: %d\n", ret);
cpufreq_cooling_unregister(data->cdev);
+ cpufreq_cpu_put(data->policy);
return ret;
}
@@ -556,6 +564,7 @@
if (ret) {
dev_err(&pdev->dev, "failed to enable thermal clk: %d\n", ret);
cpufreq_cooling_unregister(data->cdev);
+ cpufreq_cpu_put(data->policy);
return ret;
}
@@ -571,6 +580,7 @@
"failed to register thermal zone device %d\n", ret);
clk_disable_unprepare(data->thermal_clk);
cpufreq_cooling_unregister(data->cdev);
+ cpufreq_cpu_put(data->policy);
return ret;
}
@@ -599,6 +609,7 @@
clk_disable_unprepare(data->thermal_clk);
thermal_zone_device_unregister(data->tz);
cpufreq_cooling_unregister(data->cdev);
+ cpufreq_cpu_put(data->policy);
return ret;
}
@@ -620,6 +631,7 @@
thermal_zone_device_unregister(data->tz);
cpufreq_cooling_unregister(data->cdev);
+ cpufreq_cpu_put(data->policy);
return 0;
}
@@ -648,8 +660,11 @@
{
struct imx_thermal_data *data = dev_get_drvdata(dev);
struct regmap *map = data->tempmon;
+ int ret;
- clk_prepare_enable(data->thermal_clk);
+ ret = clk_prepare_enable(data->thermal_clk);
+ if (ret)
+ return ret;
/* Enabled thermal sensor after resume */
regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN);
regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_MEASURE_TEMP);
diff --git a/drivers/thermal/int340x_thermal/acpi_thermal_rel.c b/drivers/thermal/int340x_thermal/acpi_thermal_rel.c
index 2c2ec76..51ceb80 100644
--- a/drivers/thermal/int340x_thermal/acpi_thermal_rel.c
+++ b/drivers/thermal/int340x_thermal/acpi_thermal_rel.c
@@ -62,8 +62,8 @@
* acpi_parse_trt - Thermal Relationship Table _TRT for passive cooling
*
* @handle: ACPI handle of the device contains _TRT
- * @art_count: the number of valid entries resulted from parsing _TRT
- * @artp: pointer to pointer of array of art entries in parsing result
+ * @trt_count: the number of valid entries resulted from parsing _TRT
+ * @trtp: pointer to pointer of array of _TRT entries in parsing result
* @create_dev: whether to create platform devices for target and source
*
*/
@@ -208,7 +208,7 @@
if (art->target) {
result = acpi_bus_get_device(art->target, &adev);
if (result)
- pr_warn("Failed to get source ACPI device\n");
+ pr_warn("Failed to get target ACPI device\n");
}
}
diff --git a/drivers/thermal/int340x_thermal/int3403_thermal.c b/drivers/thermal/int340x_thermal/int3403_thermal.c
index c4890c9..8a7f24d 100644
--- a/drivers/thermal/int340x_thermal/int3403_thermal.c
+++ b/drivers/thermal/int340x_thermal/int3403_thermal.c
@@ -238,8 +238,16 @@
status = acpi_evaluate_integer(priv->adev->handle, "PTYP",
NULL, &priv->type);
if (ACPI_FAILURE(status)) {
- result = -EINVAL;
- goto err;
+ unsigned long long tmp;
+
+ status = acpi_evaluate_integer(priv->adev->handle, "_TMP",
+ NULL, &tmp);
+ if (ACPI_FAILURE(status)) {
+ result = -EINVAL;
+ goto err;
+ } else {
+ priv->type = INT3403_TYPE_SENSOR;
+ }
}
platform_set_drvdata(pdev, priv);
diff --git a/drivers/thermal/step_wise.c b/drivers/thermal/step_wise.c
index bcef2e7..be95826 100644
--- a/drivers/thermal/step_wise.c
+++ b/drivers/thermal/step_wise.c
@@ -186,8 +186,7 @@
/**
* step_wise_throttle - throttles devices associated with the given zone
* @tz - thermal_zone_device
- * @trip - the trip point
- * @trip_type - type of the trip point
+ * @trip - trip point index
*
* Throttling Logic: This uses the trend of the thermal zone to throttle.
* If the thermal zone is 'heating up' this throttles all the cooling
diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
index 02790f6..c211a8e 100644
--- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
+++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
@@ -28,6 +28,7 @@
#include <linux/kernel.h>
#include <linux/workqueue.h>
#include <linux/thermal.h>
+#include <linux/cpufreq.h>
#include <linux/cpumask.h>
#include <linux/cpu_cooling.h>
#include <linux/of.h>
@@ -37,6 +38,7 @@
/* common data structures */
struct ti_thermal_data {
+ struct cpufreq_policy *policy;
struct thermal_zone_device *ti_thermal;
struct thermal_zone_device *pcb_tz;
struct thermal_cooling_device *cool_dev;
@@ -247,15 +249,19 @@
if (!data)
return -EINVAL;
+ data->policy = cpufreq_cpu_get(0);
+ if (!data->policy) {
+ pr_debug("%s: CPUFreq policy not found\n", __func__);
+ return -EPROBE_DEFER;
+ }
+
/* Register cooling device */
- data->cool_dev = cpufreq_cooling_register(cpu_present_mask);
+ data->cool_dev = cpufreq_cooling_register(data->policy);
if (IS_ERR(data->cool_dev)) {
int ret = PTR_ERR(data->cool_dev);
-
- if (ret != -EPROBE_DEFER)
- dev_err(bgp->dev,
- "Failed to register cpu cooling device %d\n",
- ret);
+ dev_err(bgp->dev, "Failed to register cpu cooling device %d\n",
+ ret);
+ cpufreq_cpu_put(data->policy);
return ret;
}
@@ -270,8 +276,10 @@
data = ti_bandgap_get_sensor_data(bgp, id);
- if (data)
+ if (data) {
cpufreq_cooling_unregister(data->cool_dev);
+ cpufreq_cpu_put(data->policy);
+ }
return 0;
}
diff --git a/drivers/thermal/user_space.c b/drivers/thermal/user_space.c
index c908150..8e92a06 100644
--- a/drivers/thermal/user_space.c
+++ b/drivers/thermal/user_space.c
@@ -24,12 +24,13 @@
#include <linux/thermal.h>
#include <linux/slab.h>
+
#include "thermal_core.h"
/**
* notify_user_space - Notifies user space about thermal events
* @tz - thermal_zone_device
- * @trip - Trip point index
+ * @trip - trip point index
*
* This function notifies the user space through UEvents.
*/
diff --git a/drivers/thunderbolt/icm.c b/drivers/thunderbolt/icm.c
index 8ee3402..bdaac1f 100644
--- a/drivers/thunderbolt/icm.c
+++ b/drivers/thunderbolt/icm.c
@@ -904,7 +904,14 @@
static int icm_suspend(struct tb *tb)
{
- return nhi_mailbox_cmd(tb->nhi, NHI_MAILBOX_SAVE_DEVS, 0);
+ int ret;
+
+ ret = nhi_mailbox_cmd(tb->nhi, NHI_MAILBOX_SAVE_DEVS, 0);
+ if (ret)
+ tb_info(tb, "Ignoring mailbox command error (%d) in %s\n",
+ ret, __func__);
+
+ return 0;
}
/*
diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c
index ab3e8f4..e9391bb 100644
--- a/drivers/thunderbolt/switch.c
+++ b/drivers/thunderbolt/switch.c
@@ -30,7 +30,7 @@
struct nvm_auth_status {
struct list_head list;
- uuid_be uuid;
+ uuid_t uuid;
u32 status;
};
@@ -47,7 +47,7 @@
struct nvm_auth_status *st;
list_for_each_entry(st, &nvm_auth_status_cache, list) {
- if (!uuid_be_cmp(st->uuid, *sw->uuid))
+ if (uuid_equal(&st->uuid, sw->uuid))
return st;
}
@@ -281,9 +281,11 @@
if (active) {
config.name = "nvm_active";
config.reg_read = tb_switch_nvm_read;
+ config.read_only = true;
} else {
config.name = "nvm_non_active";
config.reg_write = tb_switch_nvm_write;
+ config.root_only = true;
}
config.id = id;
@@ -292,7 +294,6 @@
config.size = size;
config.dev = &sw->dev;
config.owner = THIS_MODULE;
- config.root_only = true;
config.priv = sw;
return nvmem_register(&config);
@@ -1460,7 +1461,7 @@
struct tb *tb;
u8 link;
u8 depth;
- const uuid_be *uuid;
+ const uuid_t *uuid;
};
static int tb_switch_match(struct device *dev, void *data)
@@ -1517,7 +1518,7 @@
* Returned switch has reference count increased so the caller needs to
* call tb_switch_put() when done with the switch.
*/
-struct tb_switch *tb_switch_find_by_uuid(struct tb *tb, const uuid_be *uuid)
+struct tb_switch *tb_switch_find_by_uuid(struct tb *tb, const uuid_t *uuid)
{
struct tb_sw_lookup lookup;
struct device *dev;
diff --git a/drivers/thunderbolt/tb.h b/drivers/thunderbolt/tb.h
index 3d9f646..e0deee4 100644
--- a/drivers/thunderbolt/tb.h
+++ b/drivers/thunderbolt/tb.h
@@ -101,7 +101,7 @@
struct tb_dma_port *dma_port;
struct tb *tb;
u64 uid;
- uuid_be *uuid;
+ uuid_t *uuid;
u16 vendor;
u16 device;
const char *vendor_name;
@@ -407,7 +407,7 @@
struct tb_switch *get_switch_at_route(struct tb_switch *sw, u64 route);
struct tb_switch *tb_switch_find_by_link_depth(struct tb *tb, u8 link,
u8 depth);
-struct tb_switch *tb_switch_find_by_uuid(struct tb *tb, const uuid_be *uuid);
+struct tb_switch *tb_switch_find_by_uuid(struct tb *tb, const uuid_t *uuid);
static inline unsigned int tb_switch_phy_port_from_link(unsigned int link)
{
diff --git a/drivers/thunderbolt/tb_msgs.h b/drivers/thunderbolt/tb_msgs.h
index 85b6d33..de6441e 100644
--- a/drivers/thunderbolt/tb_msgs.h
+++ b/drivers/thunderbolt/tb_msgs.h
@@ -179,7 +179,7 @@
struct icm_fr_event_device_connected {
struct icm_pkg_header hdr;
- uuid_be ep_uuid;
+ uuid_t ep_uuid;
u8 connection_key;
u8 connection_id;
u16 link_info;
@@ -193,7 +193,7 @@
struct icm_fr_pkg_approve_device {
struct icm_pkg_header hdr;
- uuid_be ep_uuid;
+ uuid_t ep_uuid;
u8 connection_key;
u8 connection_id;
u16 reserved;
@@ -207,7 +207,7 @@
struct icm_fr_pkg_add_device_key {
struct icm_pkg_header hdr;
- uuid_be ep_uuid;
+ uuid_t ep_uuid;
u8 connection_key;
u8 connection_id;
u16 reserved;
@@ -216,7 +216,7 @@
struct icm_fr_pkg_add_device_key_response {
struct icm_pkg_header hdr;
- uuid_be ep_uuid;
+ uuid_t ep_uuid;
u8 connection_key;
u8 connection_id;
u16 reserved;
@@ -224,7 +224,7 @@
struct icm_fr_pkg_challenge_device {
struct icm_pkg_header hdr;
- uuid_be ep_uuid;
+ uuid_t ep_uuid;
u8 connection_key;
u8 connection_id;
u16 reserved;
@@ -233,7 +233,7 @@
struct icm_fr_pkg_challenge_device_response {
struct icm_pkg_header hdr;
- uuid_be ep_uuid;
+ uuid_t ep_uuid;
u8 connection_key;
u8 connection_id;
u16 reserved;
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index d1399aa..284749f 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -448,48 +448,6 @@
return retval;
}
-/**
- * pty_open_peer - open the peer of a pty
- * @tty: the peer of the pty being opened
- *
- * Open the cached dentry in tty->link, providing a safe way for userspace
- * to get the slave end of a pty (where they have the master fd and cannot
- * access or trust the mount namespace /dev/pts was mounted inside).
- */
-static struct file *pty_open_peer(struct tty_struct *tty, int flags)
-{
- if (tty->driver->subtype != PTY_TYPE_MASTER)
- return ERR_PTR(-EIO);
- return dentry_open(tty->link->driver_data, flags, current_cred());
-}
-
-static int pty_get_peer(struct tty_struct *tty, int flags)
-{
- int fd = -1;
- struct file *filp = NULL;
- int retval = -EINVAL;
-
- fd = get_unused_fd_flags(0);
- if (fd < 0) {
- retval = fd;
- goto err;
- }
-
- filp = pty_open_peer(tty, flags);
- if (IS_ERR(filp)) {
- retval = PTR_ERR(filp);
- goto err_put;
- }
-
- fd_install(fd, filp);
- return fd;
-
-err_put:
- put_unused_fd(fd);
-err:
- return retval;
-}
-
static void pty_cleanup(struct tty_struct *tty)
{
tty_port_put(tty->port);
@@ -646,9 +604,50 @@
/* Unix98 devices */
#ifdef CONFIG_UNIX98_PTYS
-
static struct cdev ptmx_cdev;
+/**
+ * pty_open_peer - open the peer of a pty
+ * @tty: the peer of the pty being opened
+ *
+ * Open the cached dentry in tty->link, providing a safe way for userspace
+ * to get the slave end of a pty (where they have the master fd and cannot
+ * access or trust the mount namespace /dev/pts was mounted inside).
+ */
+static struct file *pty_open_peer(struct tty_struct *tty, int flags)
+{
+ if (tty->driver->subtype != PTY_TYPE_MASTER)
+ return ERR_PTR(-EIO);
+ return dentry_open(tty->link->driver_data, flags, current_cred());
+}
+
+static int pty_get_peer(struct tty_struct *tty, int flags)
+{
+ int fd = -1;
+ struct file *filp = NULL;
+ int retval = -EINVAL;
+
+ fd = get_unused_fd_flags(0);
+ if (fd < 0) {
+ retval = fd;
+ goto err;
+ }
+
+ filp = pty_open_peer(tty, flags);
+ if (IS_ERR(filp)) {
+ retval = PTR_ERR(filp);
+ goto err_put;
+ }
+
+ fd_install(fd, filp);
+ return fd;
+
+err_put:
+ put_unused_fd(fd);
+err:
+ return retval;
+}
+
static int pty_unix98_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index b5c98e5..c6360fb 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -261,7 +261,7 @@
}
static const struct property_entry exar_gpio_properties[] = {
- PROPERTY_ENTRY_U32("linux,first-pin", 0),
+ PROPERTY_ENTRY_U32("exar,first-pin", 0),
PROPERTY_ENTRY_U32("ngpios", 16),
{ }
};
@@ -326,7 +326,7 @@
}
static const struct property_entry iot2040_gpio_properties[] = {
- PROPERTY_ENTRY_U32("linux,first-pin", 10),
+ PROPERTY_ENTRY_U32("exar,first-pin", 10),
PROPERTY_ENTRY_U32("ngpios", 1),
{ }
};
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 343de8c..898dcb0 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -619,6 +619,12 @@
TIOCSER_TEMT : 0;
}
+static bool lpuart_is_32(struct lpuart_port *sport)
+{
+ return sport->port.iotype == UPIO_MEM32 ||
+ sport->port.iotype == UPIO_MEM32BE;
+}
+
static irqreturn_t lpuart_txint(int irq, void *dev_id)
{
struct lpuart_port *sport = dev_id;
@@ -627,7 +633,7 @@
spin_lock_irqsave(&sport->port.lock, flags);
if (sport->port.x_char) {
- if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
+ if (lpuart_is_32(sport))
lpuart32_write(&sport->port, sport->port.x_char, UARTDATA);
else
writeb(sport->port.x_char, sport->port.membase + UARTDR);
@@ -635,14 +641,14 @@
}
if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) {
- if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
+ if (lpuart_is_32(sport))
lpuart32_stop_tx(&sport->port);
else
lpuart_stop_tx(&sport->port);
goto out;
}
- if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
+ if (lpuart_is_32(sport))
lpuart32_transmit_buffer(sport);
else
lpuart_transmit_buffer(sport);
@@ -1978,12 +1984,12 @@
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
else
- if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
+ if (lpuart_is_32(sport))
lpuart32_console_get_options(sport, &baud, &parity, &bits);
else
lpuart_console_get_options(sport, &baud, &parity, &bits);
- if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
+ if (lpuart_is_32(sport))
lpuart32_setup_watermark(sport);
else
lpuart_setup_watermark(sport);
@@ -2118,7 +2124,7 @@
}
sport->port.irq = ret;
sport->port.iotype = sdata->iotype;
- if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
+ if (lpuart_is_32(sport))
sport->port.ops = &lpuart32_pops;
else
sport->port.ops = &lpuart_pops;
@@ -2145,7 +2151,7 @@
platform_set_drvdata(pdev, &sport->port);
- if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
+ if (lpuart_is_32(sport))
lpuart_reg.cons = LPUART32_CONSOLE;
else
lpuart_reg.cons = LPUART_CONSOLE;
@@ -2198,7 +2204,7 @@
struct lpuart_port *sport = dev_get_drvdata(dev);
unsigned long temp;
- if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE)) {
+ if (lpuart_is_32(sport)) {
/* disable Rx/Tx and interrupts */
temp = lpuart32_read(&sport->port, UARTCTRL);
temp &= ~(UARTCTRL_TE | UARTCTRL_TIE | UARTCTRL_TCIE);
@@ -2249,7 +2255,7 @@
if (sport->port.suspended && !sport->port.irq_wake)
clk_prepare_enable(sport->clk);
- if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE)) {
+ if (lpuart_is_32(sport)) {
lpuart32_setup_watermark(sport);
temp = lpuart32_read(&sport->port, UARTCTRL);
temp |= (UARTCTRL_RIE | UARTCTRL_TIE | UARTCTRL_RE |
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 9e3162b..80934e7 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -186,11 +186,6 @@
#define UART_NR 8
-/* RX DMA buffer periods */
-#define RX_DMA_PERIODS 4
-#define RX_BUF_SIZE (PAGE_SIZE)
-
-
/* i.MX21 type uart runs on all i.mx except i.MX1 and i.MX6q */
enum imx_uart_type {
IMX1_UART,
@@ -226,7 +221,6 @@
struct dma_chan *dma_chan_rx, *dma_chan_tx;
struct scatterlist rx_sgl, tx_sgl[2];
void *rx_buf;
- unsigned int rx_buf_size;
struct circ_buf rx_ring;
unsigned int rx_periods;
dma_cookie_t rx_cookie;
@@ -464,7 +458,7 @@
}
}
- while (!uart_circ_empty(xmit) &&
+ while (!uart_circ_empty(xmit) && !sport->dma_is_txing &&
!(readl(sport->port.membase + uts_reg(sport)) & UTS_TXFULL)) {
/* send xmit->buf[xmit->tail]
* out the port here */
@@ -967,6 +961,8 @@
}
}
+#define RX_BUF_SIZE (PAGE_SIZE)
+
/*
* There are two kinds of RX DMA interrupts(such as in the MX6Q):
* [1] the RX DMA buffer is full.
@@ -1049,6 +1045,9 @@
}
}
+/* RX DMA buffer periods */
+#define RX_DMA_PERIODS 4
+
static int start_rx_dma(struct imx_port *sport)
{
struct scatterlist *sgl = &sport->rx_sgl;
@@ -1059,8 +1058,9 @@
sport->rx_ring.head = 0;
sport->rx_ring.tail = 0;
+ sport->rx_periods = RX_DMA_PERIODS;
- sg_init_one(sgl, sport->rx_buf, sport->rx_buf_size);
+ sg_init_one(sgl, sport->rx_buf, RX_BUF_SIZE);
ret = dma_map_sg(dev, sgl, 1, DMA_FROM_DEVICE);
if (ret == 0) {
dev_err(dev, "DMA mapping error for RX.\n");
@@ -1171,7 +1171,7 @@
goto err;
}
- sport->rx_buf = kzalloc(sport->rx_buf_size, GFP_KERNEL);
+ sport->rx_buf = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!sport->rx_buf) {
ret = -ENOMEM;
goto err;
@@ -2036,7 +2036,6 @@
{
struct device_node *np = pdev->dev.of_node;
int ret;
- u32 dma_buf_size[2];
sport->devdata = of_device_get_match_data(&pdev->dev);
if (!sport->devdata)
@@ -2060,14 +2059,6 @@
if (of_get_property(np, "rts-gpios", NULL))
sport->have_rtsgpio = 1;
- if (!of_property_read_u32_array(np, "fsl,dma-size", dma_buf_size, 2)) {
- sport->rx_buf_size = dma_buf_size[0] * dma_buf_size[1];
- sport->rx_periods = dma_buf_size[1];
- } else {
- sport->rx_buf_size = RX_BUF_SIZE;
- sport->rx_periods = RX_DMA_PERIODS;
- }
-
return 0;
}
#else
diff --git a/drivers/tty/serial/ioc3_serial.c b/drivers/tty/serial/ioc3_serial.c
index 2a61dd6..906ee77 100644
--- a/drivers/tty/serial/ioc3_serial.c
+++ b/drivers/tty/serial/ioc3_serial.c
@@ -377,7 +377,7 @@
* called per port from attach...
* @port: port to initialize
*/
-static int inline port_init(struct ioc3_port *port)
+static inline int port_init(struct ioc3_port *port)
{
uint32_t sio_cr;
struct port_hooks *hooks = port->ip_hooks;
@@ -1430,7 +1430,7 @@
* @pending: interrupts to handle
*/
-static int inline
+static inline int
ioc3uart_intr_one(struct ioc3_submodule *is,
struct ioc3_driver_data *idd,
unsigned int pending)
diff --git a/drivers/tty/serial/ioc4_serial.c b/drivers/tty/serial/ioc4_serial.c
index f96bcf9..43d7d32 100644
--- a/drivers/tty/serial/ioc4_serial.c
+++ b/drivers/tty/serial/ioc4_serial.c
@@ -824,7 +824,7 @@
* called per port from attach...
* @port: port to initialize
*/
-static int inline port_init(struct ioc4_port *port)
+static inline int port_init(struct ioc4_port *port)
{
uint32_t sio_cr;
struct hooks *hooks = port->ip_hooks;
@@ -1048,7 +1048,7 @@
* IOC4 with serial ports in the system.
* @idd: Master module data for this IOC4
*/
-static int inline ioc4_attach_local(struct ioc4_driver_data *idd)
+static inline int ioc4_attach_local(struct ioc4_driver_data *idd)
{
struct ioc4_port *port;
struct ioc4_port *ports[IOC4_NUM_SERIAL_PORTS];
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index da5ddfc..e08b16b 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1085,10 +1085,12 @@
{
struct uart_port *port = dev_get_drvdata(dev);
struct sci_port *sci = to_sci_port(port);
+ int ret;
long r;
- if (kstrtol(buf, 0, &r) == -EINVAL)
- return -EINVAL;
+ ret = kstrtol(buf, 0, &r);
+ if (ret)
+ return ret;
sci->rx_trigger = scif_set_rtrg(port, r);
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
@@ -1116,10 +1118,12 @@
{
struct uart_port *port = dev_get_drvdata(dev);
struct sci_port *sci = to_sci_port(port);
+ int ret;
long r;
- if (kstrtol(buf, 0, &r) == -EINVAL)
- return -EINVAL;
+ ret = kstrtol(buf, 0, &r);
+ if (ret)
+ return ret;
sci->rx_fifo_timeout = r;
scif_set_rtrg(port, 1);
if (r > 0)
diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c
index f5335be..6b0ca65 100644
--- a/drivers/tty/serial/st-asc.c
+++ b/drivers/tty/serial/st-asc.c
@@ -758,6 +758,7 @@
if (IS_ERR(ascport->pinctrl)) {
ret = PTR_ERR(ascport->pinctrl);
dev_err(&pdev->dev, "Failed to get Pinctrl: %d\n", ret);
+ return ret;
}
ascport->states[DEFAULT] =
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 5357d83..5e056064 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1829,6 +1829,9 @@
{ USB_DEVICE(0x1576, 0x03b1), /* Maretron USB100 */
.driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
},
+ { USB_DEVICE(0xfff0, 0x0100), /* DATECS FP-2000 */
+ .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
+ },
{ USB_DEVICE(0x2912, 0x0001), /* ATOL FPrint */
.driver_info = CLEAR_HALT_CONDITIONS,
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index bc3b3fd..c4066cd 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -3573,6 +3573,9 @@
/* Report disconnection if it is not already done. */
dwc2_hsotg_disconnect(hsotg);
+ /* Reset device address to zero */
+ __bic32(hsotg->regs + DCFG, DCFG_DEVADDR_MASK);
+
if (usb_status & GOTGCTL_BSESVLD && connected)
dwc2_hsotg_core_init_disconnected(hsotg, true);
}
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 326b302..03474d3 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -766,6 +766,10 @@
dwc->maximum_speed = USB_SPEED_HIGH;
}
+ ret = dwc3_core_get_phy(dwc);
+ if (ret)
+ goto err0;
+
ret = dwc3_core_soft_reset(dwc);
if (ret)
goto err0;
@@ -774,10 +778,6 @@
if (ret)
goto err0;
- ret = dwc3_core_get_phy(dwc);
- if (ret)
- goto err0;
-
dwc3_core_setup_global_control(dwc);
dwc3_core_num_eps(dwc);
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index 9892650..f5aaa0c 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -512,15 +512,6 @@
/* check the DMA Status */
reg = dwc3_omap_readl(omap->base, USBOTGSS_SYSCONFIG);
- irq_set_status_flags(omap->irq, IRQ_NOAUTOEN);
- ret = devm_request_threaded_irq(dev, omap->irq, dwc3_omap_interrupt,
- dwc3_omap_interrupt_thread, IRQF_SHARED,
- "dwc3-omap", omap);
- if (ret) {
- dev_err(dev, "failed to request IRQ #%d --> %d\n",
- omap->irq, ret);
- goto err1;
- }
ret = dwc3_omap_extcon_register(omap);
if (ret < 0)
@@ -532,8 +523,15 @@
goto err1;
}
+ ret = devm_request_threaded_irq(dev, omap->irq, dwc3_omap_interrupt,
+ dwc3_omap_interrupt_thread, IRQF_SHARED,
+ "dwc3-omap", omap);
+ if (ret) {
+ dev_err(dev, "failed to request IRQ #%d --> %d\n",
+ omap->irq, ret);
+ goto err1;
+ }
dwc3_omap_enable_irqs(omap);
- enable_irq(omap->irq);
return 0;
err1:
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 9e41605a..6b299c7 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -191,14 +191,16 @@
req->started = false;
list_del(&req->list);
- req->trb = NULL;
req->remaining = 0;
if (req->request.status == -EINPROGRESS)
req->request.status = status;
- usb_gadget_unmap_request_by_dev(dwc->sysdev,
- &req->request, req->direction);
+ if (req->trb)
+ usb_gadget_unmap_request_by_dev(dwc->sysdev,
+ &req->request, req->direction);
+
+ req->trb = NULL;
trace_dwc3_gadget_giveback(req);
diff --git a/drivers/usb/gadget/function/f_mass_storage.c b/drivers/usb/gadget/function/f_mass_storage.c
index e80b9c1..f95bddd 100644
--- a/drivers/usb/gadget/function/f_mass_storage.c
+++ b/drivers/usb/gadget/function/f_mass_storage.c
@@ -2490,7 +2490,7 @@
int i;
down_write(&common->filesem);
- for (i = 0; i < ARRAY_SIZE(common->luns); --i) {
+ for (i = 0; i < ARRAY_SIZE(common->luns); i++) {
struct fsg_lun *curlun = common->luns[i];
if (!curlun || !fsg_lun_is_open(curlun))
continue;
diff --git a/drivers/usb/gadget/function/f_uac1.c b/drivers/usb/gadget/function/f_uac1.c
index 8656f84..29efbed 100644
--- a/drivers/usb/gadget/function/f_uac1.c
+++ b/drivers/usb/gadget/function/f_uac1.c
@@ -92,9 +92,9 @@
.bDescriptorType = USB_DT_CS_INTERFACE,
.bDescriptorSubtype = UAC_INPUT_TERMINAL,
.bTerminalID = USB_OUT_IT_ID,
- .wTerminalType = UAC_TERMINAL_STREAMING,
+ .wTerminalType = cpu_to_le16(UAC_TERMINAL_STREAMING),
.bAssocTerminal = 0,
- .wChannelConfig = 0x3,
+ .wChannelConfig = cpu_to_le16(0x3),
};
#define IO_OUT_OT_ID 2
@@ -103,7 +103,7 @@
.bDescriptorType = USB_DT_CS_INTERFACE,
.bDescriptorSubtype = UAC_OUTPUT_TERMINAL,
.bTerminalID = IO_OUT_OT_ID,
- .wTerminalType = UAC_OUTPUT_TERMINAL_SPEAKER,
+ .wTerminalType = cpu_to_le16(UAC_OUTPUT_TERMINAL_SPEAKER),
.bAssocTerminal = 0,
.bSourceID = USB_OUT_IT_ID,
};
@@ -114,9 +114,9 @@
.bDescriptorType = USB_DT_CS_INTERFACE,
.bDescriptorSubtype = UAC_INPUT_TERMINAL,
.bTerminalID = IO_IN_IT_ID,
- .wTerminalType = UAC_INPUT_TERMINAL_MICROPHONE,
+ .wTerminalType = cpu_to_le16(UAC_INPUT_TERMINAL_MICROPHONE),
.bAssocTerminal = 0,
- .wChannelConfig = 0x3,
+ .wChannelConfig = cpu_to_le16(0x3),
};
#define USB_IN_OT_ID 4
@@ -125,7 +125,7 @@
.bDescriptorType = USB_DT_CS_INTERFACE,
.bDescriptorSubtype = UAC_OUTPUT_TERMINAL,
.bTerminalID = USB_IN_OT_ID,
- .wTerminalType = UAC_TERMINAL_STREAMING,
+ .wTerminalType = cpu_to_le16(UAC_TERMINAL_STREAMING),
.bAssocTerminal = 0,
.bSourceID = IO_IN_IT_ID,
};
@@ -174,7 +174,7 @@
.bDescriptorSubtype = UAC_AS_GENERAL,
.bTerminalLink = USB_OUT_IT_ID,
.bDelay = 1,
- .wFormatTag = UAC_FORMAT_TYPE_I_PCM,
+ .wFormatTag = cpu_to_le16(UAC_FORMAT_TYPE_I_PCM),
};
static struct uac1_as_header_descriptor as_in_header_desc = {
@@ -183,7 +183,7 @@
.bDescriptorSubtype = UAC_AS_GENERAL,
.bTerminalLink = USB_IN_OT_ID,
.bDelay = 1,
- .wFormatTag = UAC_FORMAT_TYPE_I_PCM,
+ .wFormatTag = cpu_to_le16(UAC_FORMAT_TYPE_I_PCM),
};
DECLARE_UAC_FORMAT_TYPE_I_DISCRETE_DESC(1);
@@ -606,8 +606,8 @@
if (status)
goto fail;
- audio->out_ep_maxpsize = as_out_ep_desc.wMaxPacketSize;
- audio->in_ep_maxpsize = as_in_ep_desc.wMaxPacketSize;
+ audio->out_ep_maxpsize = le16_to_cpu(as_out_ep_desc.wMaxPacketSize);
+ audio->in_ep_maxpsize = le16_to_cpu(as_in_ep_desc.wMaxPacketSize);
audio->params.c_chmask = audio_opts->c_chmask;
audio->params.c_srate = audio_opts->c_srate;
audio->params.c_ssize = audio_opts->c_ssize;
diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c
index 9082ce2..f05c3f3 100644
--- a/drivers/usb/gadget/function/f_uac2.c
+++ b/drivers/usb/gadget/function/f_uac2.c
@@ -168,7 +168,7 @@
.bAssocTerminal = 0,
.bCSourceID = USB_OUT_CLK_ID,
.iChannelNames = 0,
- .bmControls = (CONTROL_RDWR << COPY_CTRL),
+ .bmControls = cpu_to_le16(CONTROL_RDWR << COPY_CTRL),
};
/* Input Terminal for I/O-In */
@@ -182,7 +182,7 @@
.bAssocTerminal = 0,
.bCSourceID = USB_IN_CLK_ID,
.iChannelNames = 0,
- .bmControls = (CONTROL_RDWR << COPY_CTRL),
+ .bmControls = cpu_to_le16(CONTROL_RDWR << COPY_CTRL),
};
/* Ouput Terminal for USB_IN */
@@ -196,7 +196,7 @@
.bAssocTerminal = 0,
.bSourceID = IO_IN_IT_ID,
.bCSourceID = USB_IN_CLK_ID,
- .bmControls = (CONTROL_RDWR << COPY_CTRL),
+ .bmControls = cpu_to_le16(CONTROL_RDWR << COPY_CTRL),
};
/* Ouput Terminal for I/O-Out */
@@ -210,7 +210,7 @@
.bAssocTerminal = 0,
.bSourceID = USB_OUT_IT_ID,
.bCSourceID = USB_OUT_CLK_ID,
- .bmControls = (CONTROL_RDWR << COPY_CTRL),
+ .bmControls = cpu_to_le16(CONTROL_RDWR << COPY_CTRL),
};
static struct uac2_ac_header_descriptor ac_hdr_desc = {
@@ -220,9 +220,10 @@
.bDescriptorSubtype = UAC_MS_HEADER,
.bcdADC = cpu_to_le16(0x200),
.bCategory = UAC2_FUNCTION_IO_BOX,
- .wTotalLength = sizeof in_clk_src_desc + sizeof out_clk_src_desc
- + sizeof usb_out_it_desc + sizeof io_in_it_desc
- + sizeof usb_in_ot_desc + sizeof io_out_ot_desc,
+ .wTotalLength = cpu_to_le16(sizeof in_clk_src_desc
+ + sizeof out_clk_src_desc + sizeof usb_out_it_desc
+ + sizeof io_in_it_desc + sizeof usb_in_ot_desc
+ + sizeof io_out_ot_desc),
.bmControls = 0,
};
@@ -569,10 +570,12 @@
return ret;
}
- agdev->in_ep_maxpsize = max(fs_epin_desc.wMaxPacketSize,
- hs_epin_desc.wMaxPacketSize);
- agdev->out_ep_maxpsize = max(fs_epout_desc.wMaxPacketSize,
- hs_epout_desc.wMaxPacketSize);
+ agdev->in_ep_maxpsize = max_t(u16,
+ le16_to_cpu(fs_epin_desc.wMaxPacketSize),
+ le16_to_cpu(hs_epin_desc.wMaxPacketSize));
+ agdev->out_ep_maxpsize = max_t(u16,
+ le16_to_cpu(fs_epout_desc.wMaxPacketSize),
+ le16_to_cpu(hs_epout_desc.wMaxPacketSize));
hs_epout_desc.bEndpointAddress = fs_epout_desc.bEndpointAddress;
hs_epin_desc.bEndpointAddress = fs_epin_desc.bEndpointAddress;
diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
index 9ffb11e..7cd5c96 100644
--- a/drivers/usb/gadget/udc/Kconfig
+++ b/drivers/usb/gadget/udc/Kconfig
@@ -192,7 +192,7 @@
config USB_RENESAS_USB3
tristate 'Renesas USB3.0 Peripheral controller'
depends on ARCH_RENESAS || COMPILE_TEST
- depends on EXTCON
+ depends on EXTCON && HAS_DMA
help
Renesas USB3.0 Peripheral controller is a USB peripheral controller
that supports super, high, and full speed USB 3.0 data transfers.
@@ -257,6 +257,7 @@
config USB_SNP_CORE
depends on (USB_AMD5536UDC || USB_SNP_UDC_PLAT)
+ depends on HAS_DMA
tristate
help
This enables core driver support for Synopsys USB 2.0 Device
@@ -271,7 +272,7 @@
config USB_SNP_UDC_PLAT
tristate "Synopsys USB 2.0 Device controller"
- depends on (USB_GADGET && OF)
+ depends on USB_GADGET && OF && HAS_DMA
select USB_GADGET_DUALSPEED
select USB_SNP_CORE
default ARCH_BCM_IPROC
diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c
index d827832..62dc9c7 100644
--- a/drivers/usb/gadget/udc/renesas_usb3.c
+++ b/drivers/usb/gadget/udc/renesas_usb3.c
@@ -89,6 +89,9 @@
/* USB_COM_CON */
#define USB_COM_CON_CONF BIT(24)
+#define USB_COM_CON_PN_WDATAIF_NL BIT(23)
+#define USB_COM_CON_PN_RDATAIF_NL BIT(22)
+#define USB_COM_CON_PN_LSTTR_PP BIT(21)
#define USB_COM_CON_SPD_MODE BIT(17)
#define USB_COM_CON_EP0_EN BIT(16)
#define USB_COM_CON_DEV_ADDR_SHIFT 8
@@ -686,6 +689,9 @@
{
usb3_init_axi_bridge(usb3);
usb3_init_epc_registers(usb3);
+ usb3_set_bit(usb3, USB_COM_CON_PN_WDATAIF_NL |
+ USB_COM_CON_PN_RDATAIF_NL | USB_COM_CON_PN_LSTTR_PP,
+ USB3_USB_COM_CON);
usb3_write(usb3, USB_OTG_IDMON, USB3_USB_OTG_INT_STA);
usb3_write(usb3, USB_OTG_IDMON, USB3_USB_OTG_INT_ENA);
@@ -1369,7 +1375,7 @@
usb3_for_each_dma(usb3, dma, i) {
if (dma->prd) {
- dma_free_coherent(dev, USB3_DMA_MAX_XFER_SIZE,
+ dma_free_coherent(dev, USB3_DMA_PRD_SIZE,
dma->prd, dma->prd_dma);
dma->prd = NULL;
}
@@ -1409,12 +1415,12 @@
int ret = -EAGAIN;
u32 enable_bits = 0;
- if (usb3_ep->halt || usb3_ep->started)
- return;
- if (usb3_req != usb3_req_first)
- return;
-
spin_lock_irqsave(&usb3->lock, flags);
+ if (usb3_ep->halt || usb3_ep->started)
+ goto out;
+ if (usb3_req != usb3_req_first)
+ goto out;
+
if (usb3_pn_change(usb3, usb3_ep->num) < 0)
goto out;
diff --git a/drivers/usb/gadget/udc/snps_udc_plat.c b/drivers/usb/gadget/udc/snps_udc_plat.c
index 2e11f19..f7b4d0f 100644
--- a/drivers/usb/gadget/udc/snps_udc_plat.c
+++ b/drivers/usb/gadget/udc/snps_udc_plat.c
@@ -28,7 +28,7 @@
/* description */
#define UDC_MOD_DESCRIPTION "Synopsys UDC platform driver"
-void start_udc(struct udc *udc)
+static void start_udc(struct udc *udc)
{
if (udc->driver) {
dev_info(udc->dev, "Connecting...\n");
@@ -38,7 +38,7 @@
}
}
-void stop_udc(struct udc *udc)
+static void stop_udc(struct udc *udc)
{
int tmp;
u32 reg;
@@ -76,7 +76,7 @@
dev_info(udc->dev, "Device disconnected\n");
}
-void udc_drd_work(struct work_struct *work)
+static void udc_drd_work(struct work_struct *work)
{
struct udc *udc;
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index a9a1e4c..c8989c6 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -77,6 +77,16 @@
#define USB_INTEL_USB3_PSSEN 0xD8
#define USB_INTEL_USB3PRM 0xDC
+/* ASMEDIA quirk use */
+#define ASMT_DATA_WRITE0_REG 0xF8
+#define ASMT_DATA_WRITE1_REG 0xFC
+#define ASMT_CONTROL_REG 0xE0
+#define ASMT_CONTROL_WRITE_BIT 0x02
+#define ASMT_WRITEREG_CMD 0x10423
+#define ASMT_FLOWCTL_ADDR 0xFA30
+#define ASMT_FLOWCTL_DATA 0xBA
+#define ASMT_PSEUDO_DATA 0
+
/*
* amd_chipset_gen values represent AMD different chipset generations
*/
@@ -412,6 +422,50 @@
}
EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_disable);
+static int usb_asmedia_wait_write(struct pci_dev *pdev)
+{
+ unsigned long retry_count;
+ unsigned char value;
+
+ for (retry_count = 1000; retry_count > 0; --retry_count) {
+
+ pci_read_config_byte(pdev, ASMT_CONTROL_REG, &value);
+
+ if (value == 0xff) {
+ dev_err(&pdev->dev, "%s: check_ready ERROR", __func__);
+ return -EIO;
+ }
+
+ if ((value & ASMT_CONTROL_WRITE_BIT) == 0)
+ return 0;
+
+ usleep_range(40, 60);
+ }
+
+ dev_warn(&pdev->dev, "%s: check_write_ready timeout", __func__);
+ return -ETIMEDOUT;
+}
+
+void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev)
+{
+ if (usb_asmedia_wait_write(pdev) != 0)
+ return;
+
+ /* send command and address to device */
+ pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_WRITEREG_CMD);
+ pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_FLOWCTL_ADDR);
+ pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
+
+ if (usb_asmedia_wait_write(pdev) != 0)
+ return;
+
+ /* send data to device */
+ pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_FLOWCTL_DATA);
+ pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_PSEUDO_DATA);
+ pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
+}
+EXPORT_SYMBOL_GPL(usb_asmedia_modifyflowcontrol);
+
void usb_amd_quirk_pll_enable(void)
{
usb_amd_quirk_pll(0);
diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h
index 0222195..6559944 100644
--- a/drivers/usb/host/pci-quirks.h
+++ b/drivers/usb/host/pci-quirks.h
@@ -11,6 +11,7 @@
void usb_amd_dev_put(void);
void usb_amd_quirk_pll_disable(void);
void usb_amd_quirk_pll_enable(void);
+void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev);
void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev);
void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
void sb800_prefetch(struct device *dev, int on);
@@ -18,6 +19,7 @@
struct pci_dev;
static inline void usb_amd_quirk_pll_disable(void) {}
static inline void usb_amd_quirk_pll_enable(void) {}
+static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {}
static inline void usb_amd_dev_put(void) {}
static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {}
static inline void sb800_prefetch(struct device *dev, int on) {}
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 1adae9e..00721e8 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -398,14 +398,21 @@
spin_lock_irqsave(&xhci->lock, flags);
for (i = LAST_EP_INDEX; i > 0; i--) {
if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue) {
+ struct xhci_ep_ctx *ep_ctx;
struct xhci_command *command;
+
+ ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->out_ctx, i);
+
+ /* Check ep is running, required by AMD SNPS 3.1 xHC */
+ if (GET_EP_CTX_STATE(ep_ctx) != EP_STATE_RUNNING)
+ continue;
+
command = xhci_alloc_command(xhci, false, false,
GFP_NOWAIT);
if (!command) {
spin_unlock_irqrestore(&xhci->lock, flags);
xhci_free_command(xhci, cmd);
return -ENOMEM;
-
}
xhci_queue_stop_endpoint(xhci, command, slot_id, i,
suspend);
@@ -603,12 +610,14 @@
/* Disable all Device Slots */
xhci_dbg(xhci, "Disable all slots\n");
+ spin_unlock_irqrestore(&xhci->lock, *flags);
for (i = 1; i <= HCS_MAX_SLOTS(xhci->hcs_params1); i++) {
retval = xhci_disable_slot(xhci, NULL, i);
if (retval)
xhci_err(xhci, "Failed to disable slot %d, %d. Enter test mode anyway\n",
i, retval);
}
+ spin_lock_irqsave(&xhci->lock, *flags);
/* Put all ports to the Disable state by clear PP */
xhci_dbg(xhci, "Disable all port (PP = 0)\n");
/* Power off USB3 ports*/
@@ -897,6 +906,9 @@
clear_bit(wIndex, &bus_state->resuming_ports);
set_bit(wIndex, &bus_state->rexit_ports);
+
+ xhci_test_and_clear_bit(xhci, port_array, wIndex,
+ PORT_PLC);
xhci_set_link_state(xhci, port_array, wIndex,
XDEV_U0);
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 53882e2..5b0fa55 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -59,6 +59,8 @@
#define PCI_DEVICE_ID_AMD_PROMONTORYA_2 0x43bb
#define PCI_DEVICE_ID_AMD_PROMONTORYA_1 0x43bc
+#define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI 0x1142
+
static const char hcd_name[] = "xhci_hcd";
static struct hc_driver __read_mostly xhci_pci_hc_driver;
@@ -217,6 +219,10 @@
pdev->device == 0x1142)
xhci->quirks |= XHCI_TRUST_TX_LENGTH;
+ if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
+ pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI)
+ xhci->quirks |= XHCI_ASMEDIA_MODIFY_FLOWCONTROL;
+
if (pdev->vendor == PCI_VENDOR_ID_TI && pdev->device == 0x8241)
xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_7;
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index c50c902..cc368ad 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -864,13 +864,16 @@
(ep->ep_state & EP_GETTING_NO_STREAMS)) {
int stream_id;
- for (stream_id = 0; stream_id < ep->stream_info->num_streams;
+ for (stream_id = 1; stream_id < ep->stream_info->num_streams;
stream_id++) {
+ ring = ep->stream_info->stream_rings[stream_id];
+ if (!ring)
+ continue;
+
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"Killing URBs for slot ID %u, ep index %u, stream %u",
- slot_id, ep_index, stream_id + 1);
- xhci_kill_ring_urbs(xhci,
- ep->stream_info->stream_rings[stream_id]);
+ slot_id, ep_index, stream_id);
+ xhci_kill_ring_urbs(xhci, ring);
}
} else {
ring = ep->ring;
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 56f85df..b2ff1ff 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -198,6 +198,9 @@
if (ret)
return ret;
+ if (xhci->quirks & XHCI_ASMEDIA_MODIFY_FLOWCONTROL)
+ usb_asmedia_modifyflowcontrol(to_pci_dev(xhci_to_hcd(xhci)->self.controller));
+
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"Wait for controller to be ready for doorbell rings");
/*
@@ -622,8 +625,10 @@
if (!command)
return -ENOMEM;
- xhci_queue_vendor_command(xhci, command, 0, 0, 0,
+ ret = xhci_queue_vendor_command(xhci, command, 0, 0, 0,
TRB_TYPE(TRB_NEC_GET_FW));
+ if (ret)
+ xhci_free_command(xhci, command);
}
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"Finished xhci_run for USB2 roothub");
@@ -1085,6 +1090,9 @@
if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && !comp_timer_running)
compliance_mode_recovery_timer_init(xhci);
+ if (xhci->quirks & XHCI_ASMEDIA_MODIFY_FLOWCONTROL)
+ usb_asmedia_modifyflowcontrol(to_pci_dev(hcd->self.controller));
+
/* Re-enable port polling. */
xhci_dbg(xhci, "%s: starting port polling.\n", __func__);
set_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 3c6da1f..e3e9352 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1820,6 +1820,7 @@
#define XHCI_BROKEN_PORT_PED (1 << 25)
#define XHCI_LIMIT_ENDPOINT_INTERVAL_7 (1 << 26)
#define XHCI_U2_DISABLE_WAKE (1 << 27)
+#define XHCI_ASMEDIA_MODIFY_FLOWCONTROL (1 << 28)
unsigned int num_active_eps;
unsigned int limit_active_eps;
diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c
index 623c513..f0ce304 100644
--- a/drivers/usb/renesas_usbhs/common.c
+++ b/drivers/usb/renesas_usbhs/common.c
@@ -752,8 +752,10 @@
struct usbhs_priv *priv = dev_get_drvdata(dev);
struct platform_device *pdev = usbhs_priv_to_pdev(priv);
- if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL))
+ if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) {
usbhsc_power_ctrl(priv, 1);
+ usbhs_mod_autonomy_mode(priv);
+ }
usbhs_platform_call(priv, phy_reset, pdev);
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index 5bc7a61..93fba90 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -37,6 +37,7 @@
struct usbhsg_uep {
struct usb_ep ep;
struct usbhs_pipe *pipe;
+ spinlock_t lock; /* protect the pipe */
char ep_name[EP_NAME_SIZE];
@@ -636,10 +637,16 @@
static int usbhsg_ep_disable(struct usb_ep *ep)
{
struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep);
- struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep);
+ struct usbhs_pipe *pipe;
+ unsigned long flags;
+ int ret = 0;
- if (!pipe)
- return -EINVAL;
+ spin_lock_irqsave(&uep->lock, flags);
+ pipe = usbhsg_uep_to_pipe(uep);
+ if (!pipe) {
+ ret = -EINVAL;
+ goto out;
+ }
usbhsg_pipe_disable(uep);
usbhs_pipe_free(pipe);
@@ -647,6 +654,9 @@
uep->pipe->mod_private = NULL;
uep->pipe = NULL;
+out:
+ spin_unlock_irqrestore(&uep->lock, flags);
+
return 0;
}
@@ -696,8 +706,11 @@
{
struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep);
struct usbhsg_request *ureq = usbhsg_req_to_ureq(req);
- struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep);
+ struct usbhs_pipe *pipe;
+ unsigned long flags;
+ spin_lock_irqsave(&uep->lock, flags);
+ pipe = usbhsg_uep_to_pipe(uep);
if (pipe)
usbhs_pkt_pop(pipe, usbhsg_ureq_to_pkt(ureq));
@@ -706,6 +719,7 @@
* even if the pipe is NULL.
*/
usbhsg_queue_pop(uep, ureq, -ECONNRESET);
+ spin_unlock_irqrestore(&uep->lock, flags);
return 0;
}
@@ -852,10 +866,10 @@
{
struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv);
struct usbhs_mod *mod = usbhs_mod_get_current(priv);
- struct usbhsg_uep *dcp = usbhsg_gpriv_to_dcp(gpriv);
+ struct usbhsg_uep *uep;
struct device *dev = usbhs_priv_to_dev(priv);
unsigned long flags;
- int ret = 0;
+ int ret = 0, i;
/******************** spin lock ********************/
usbhs_lock(priv, flags);
@@ -887,7 +901,9 @@
usbhs_sys_set_test_mode(priv, 0);
usbhs_sys_function_ctrl(priv, 0);
- usbhsg_ep_disable(&dcp->ep);
+ /* disable all eps */
+ usbhsg_for_each_uep_with_dcp(uep, gpriv, i)
+ usbhsg_ep_disable(&uep->ep);
dev_dbg(dev, "stop gadget\n");
@@ -1069,6 +1085,7 @@
ret = -ENOMEM;
goto usbhs_mod_gadget_probe_err_gpriv;
}
+ spin_lock_init(&uep->lock);
gpriv->transceiver = usb_get_phy(USB_PHY_TYPE_UNDEFINED);
dev_info(dev, "%stransceiver found\n",
diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c
index 8a069aa..27d7a70 100644
--- a/drivers/usb/serial/safe_serial.c
+++ b/drivers/usb/serial/safe_serial.c
@@ -180,7 +180,7 @@
* Perform a memcpy and calculate fcs using ppp 10bit CRC algorithm. Return
* new 10 bit FCS.
*/
-static __u16 __inline__ fcs_compute10(unsigned char *sp, int len, __u16 fcs)
+static inline __u16 fcs_compute10(unsigned char *sp, int len, __u16 fcs)
{
for (; len-- > 0; fcs = CRC10_FCS(fcs, *sp++));
return fcs;
diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c
index fba4005..6a7720e 100644
--- a/drivers/usb/storage/isd200.c
+++ b/drivers/usb/storage/isd200.c
@@ -1529,8 +1529,11 @@
/* Make sure driver was initialized */
- if (us->extra == NULL)
+ if (us->extra == NULL) {
usb_stor_dbg(us, "ERROR Driver not initialized\n");
+ srb->result = DID_ERROR << 16;
+ return;
+ }
scsi_set_resid(srb, 0);
/* scsi_bufflen might change in protocol translation to ata */
diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index 5ef014b..cfb1e3b 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -737,7 +737,7 @@
return FAILED;
}
-static int uas_eh_bus_reset_handler(struct scsi_cmnd *cmnd)
+static int uas_eh_device_reset_handler(struct scsi_cmnd *cmnd)
{
struct scsi_device *sdev = cmnd->device;
struct uas_dev_info *devinfo = sdev->hostdata;
@@ -848,7 +848,7 @@
.slave_alloc = uas_slave_alloc,
.slave_configure = uas_slave_configure,
.eh_abort_handler = uas_eh_abort_handler,
- .eh_bus_reset_handler = uas_eh_bus_reset_handler,
+ .eh_device_reset_handler = uas_eh_device_reset_handler,
.this_id = -1,
.sg_tablesize = SG_NONE,
.skip_settle_delay = 1,
diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h
index 6b0d2f0..8a88f45 100644
--- a/drivers/usb/typec/ucsi/ucsi.h
+++ b/drivers/usb/typec/ucsi/ucsi.h
@@ -3,6 +3,7 @@
#define __DRIVER_USB_TYPEC_UCSI_H
#include <linux/bitops.h>
+#include <linux/device.h>
#include <linux/types.h>
/* -------------------------------------------------------------------------- */
diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
index 324c52e..f041b1a 100644
--- a/drivers/vfio/pci/vfio_pci.c
+++ b/drivers/vfio/pci/vfio_pci.c
@@ -195,11 +195,11 @@
switch (pdev->vendor) {
case PCI_VENDOR_ID_INTEL:
switch (pdev->device) {
- /* All i40e (XL710/X710) 10/20/40GbE NICs */
+ /* All i40e (XL710/X710/XXV710) 10/20/25/40GbE NICs */
case 0x1572:
case 0x1574:
case 0x1580 ... 0x1581:
- case 0x1583 ... 0x1589:
+ case 0x1583 ... 0x158b:
case 0x37d0 ... 0x37d2:
return true;
default:
@@ -226,7 +226,14 @@
if (ret)
return ret;
- vdev->reset_works = (pci_reset_function(pdev) == 0);
+ /* If reset fails because of the device lock, fail this path entirely */
+ ret = pci_try_reset_function(pdev);
+ if (ret == -EAGAIN) {
+ pci_disable_device(pdev);
+ return ret;
+ }
+
+ vdev->reset_works = !ret;
pci_save_state(pdev);
vdev->pci_saved_state = pci_store_saved_state(pdev);
if (!vdev->pci_saved_state)
diff --git a/drivers/vfio/pci/vfio_pci_config.c b/drivers/vfio/pci/vfio_pci_config.c
index 330a570..5628fe1 100644
--- a/drivers/vfio/pci/vfio_pci_config.c
+++ b/drivers/vfio/pci/vfio_pci_config.c
@@ -839,7 +839,7 @@
/* Permissions for PCI Express capability */
static int __init init_pci_cap_exp_perm(struct perm_bits *perm)
{
- /* Alloc larger of two possible sizes */
+ /* Alloc largest of possible sizes */
if (alloc_perm_bits(perm, PCI_CAP_EXP_ENDPOINT_SIZEOF_V2))
return -ENOMEM;
@@ -1243,11 +1243,16 @@
vdev->extended_caps = (dword != 0);
}
- /* length based on version */
- if ((pcie_caps_reg(pdev) & PCI_EXP_FLAGS_VERS) == 1)
+ /* length based on version and type */
+ if ((pcie_caps_reg(pdev) & PCI_EXP_FLAGS_VERS) == 1) {
+ if (pci_pcie_type(pdev) == PCI_EXP_TYPE_RC_END)
+ return 0xc; /* "All Devices" only, no link */
return PCI_CAP_EXP_ENDPOINT_SIZEOF_V1;
- else
+ } else {
+ if (pci_pcie_type(pdev) == PCI_EXP_TYPE_RC_END)
+ return 0x2c; /* No link */
return PCI_CAP_EXP_ENDPOINT_SIZEOF_V2;
+ }
case PCI_CAP_ID_HT:
ret = pci_read_config_byte(pdev, pos + 3, &byte);
if (ret)
diff --git a/drivers/vfio/vfio.c b/drivers/vfio/vfio.c
index 561084a..330d505 100644
--- a/drivers/vfio/vfio.c
+++ b/drivers/vfio/vfio.c
@@ -382,7 +382,7 @@
if (IS_ERR(dev)) {
vfio_free_group_minor(minor);
vfio_group_unlock_and_free(group);
- return (struct vfio_group *)dev; /* ERR_PTR */
+ return ERR_CAST(dev);
}
group->minor = minor;
@@ -423,6 +423,34 @@
kref_put_mutex(&group->kref, vfio_group_release, &vfio.group_lock);
}
+struct vfio_group_put_work {
+ struct work_struct work;
+ struct vfio_group *group;
+};
+
+static void vfio_group_put_bg(struct work_struct *work)
+{
+ struct vfio_group_put_work *do_work;
+
+ do_work = container_of(work, struct vfio_group_put_work, work);
+
+ vfio_group_put(do_work->group);
+ kfree(do_work);
+}
+
+static void vfio_group_schedule_put(struct vfio_group *group)
+{
+ struct vfio_group_put_work *do_work;
+
+ do_work = kmalloc(sizeof(*do_work), GFP_KERNEL);
+ if (WARN_ON(!do_work))
+ return;
+
+ INIT_WORK(&do_work->work, vfio_group_put_bg);
+ do_work->group = group;
+ schedule_work(&do_work->work);
+}
+
/* Assume group_lock or group reference is held */
static void vfio_group_get(struct vfio_group *group)
{
@@ -762,7 +790,14 @@
break;
}
- vfio_group_put(group);
+ /*
+ * If we're the last reference to the group, the group will be
+ * released, which includes unregistering the iommu group notifier.
+ * We hold a read-lock on that notifier list, unregistering needs
+ * a write-lock... deadlock. Release our reference asynchronously
+ * to avoid that situation.
+ */
+ vfio_group_schedule_put(group);
return NOTIFY_OK;
}
@@ -1140,15 +1175,11 @@
ret = vfio_ioctl_set_iommu(container, arg);
break;
default:
- down_read(&container->group_lock);
-
driver = container->iommu_driver;
data = container->iommu_data;
if (driver) /* passthrough all unrecognized ioctls */
ret = driver->ops->ioctl(data, cmd, arg);
-
- up_read(&container->group_lock);
}
return ret;
@@ -1202,15 +1233,11 @@
struct vfio_iommu_driver *driver;
ssize_t ret = -EINVAL;
- down_read(&container->group_lock);
-
driver = container->iommu_driver;
if (likely(driver && driver->ops->read))
ret = driver->ops->read(container->iommu_data,
buf, count, ppos);
- up_read(&container->group_lock);
-
return ret;
}
@@ -1221,15 +1248,11 @@
struct vfio_iommu_driver *driver;
ssize_t ret = -EINVAL;
- down_read(&container->group_lock);
-
driver = container->iommu_driver;
if (likely(driver && driver->ops->write))
ret = driver->ops->write(container->iommu_data,
buf, count, ppos);
- up_read(&container->group_lock);
-
return ret;
}
@@ -1239,14 +1262,10 @@
struct vfio_iommu_driver *driver;
int ret = -EINVAL;
- down_read(&container->group_lock);
-
driver = container->iommu_driver;
if (likely(driver && driver->ops->mmap))
ret = driver->ops->mmap(container->iommu_data, vma);
- up_read(&container->group_lock);
-
return ret;
}
@@ -1741,6 +1760,15 @@
}
EXPORT_SYMBOL_GPL(vfio_group_put_external_user);
+bool vfio_external_group_match_file(struct vfio_group *test_group,
+ struct file *filep)
+{
+ struct vfio_group *group = filep->private_data;
+
+ return (filep->f_op == &vfio_group_fops) && (group == test_group);
+}
+EXPORT_SYMBOL_GPL(vfio_external_group_match_file);
+
int vfio_external_user_iommu_id(struct vfio_group *group)
{
return iommu_group_id(group->iommu_group);
@@ -1949,8 +1977,6 @@
goto err_pin_pages;
container = group->container;
- down_read(&container->group_lock);
-
driver = container->iommu_driver;
if (likely(driver && driver->ops->pin_pages))
ret = driver->ops->pin_pages(container->iommu_data, user_pfn,
@@ -1958,7 +1984,6 @@
else
ret = -ENOTTY;
- up_read(&container->group_lock);
vfio_group_try_dissolve_container(group);
err_pin_pages:
@@ -1998,8 +2023,6 @@
goto err_unpin_pages;
container = group->container;
- down_read(&container->group_lock);
-
driver = container->iommu_driver;
if (likely(driver && driver->ops->unpin_pages))
ret = driver->ops->unpin_pages(container->iommu_data, user_pfn,
@@ -2007,7 +2030,6 @@
else
ret = -ENOTTY;
- up_read(&container->group_lock);
vfio_group_try_dissolve_container(group);
err_unpin_pages:
@@ -2029,8 +2051,6 @@
return -EINVAL;
container = group->container;
- down_read(&container->group_lock);
-
driver = container->iommu_driver;
if (likely(driver && driver->ops->register_notifier))
ret = driver->ops->register_notifier(container->iommu_data,
@@ -2038,7 +2058,6 @@
else
ret = -ENOTTY;
- up_read(&container->group_lock);
vfio_group_try_dissolve_container(group);
return ret;
@@ -2056,8 +2075,6 @@
return -EINVAL;
container = group->container;
- down_read(&container->group_lock);
-
driver = container->iommu_driver;
if (likely(driver && driver->ops->unregister_notifier))
ret = driver->ops->unregister_notifier(container->iommu_data,
@@ -2065,7 +2082,6 @@
else
ret = -ENOTTY;
- up_read(&container->group_lock);
vfio_group_try_dissolve_container(group);
return ret;
@@ -2083,7 +2099,6 @@
unsigned long *events,
struct notifier_block *nb)
{
- struct vfio_container *container;
int ret;
bool set_kvm = false;
@@ -2101,9 +2116,6 @@
if (ret)
return -EINVAL;
- container = group->container;
- down_read(&container->group_lock);
-
ret = blocking_notifier_chain_register(&group->notifier, nb);
/*
@@ -2114,7 +2126,6 @@
blocking_notifier_call_chain(&group->notifier,
VFIO_GROUP_NOTIFY_SET_KVM, group->kvm);
- up_read(&container->group_lock);
vfio_group_try_dissolve_container(group);
return ret;
@@ -2123,19 +2134,14 @@
static int vfio_unregister_group_notifier(struct vfio_group *group,
struct notifier_block *nb)
{
- struct vfio_container *container;
int ret;
ret = vfio_group_add_container_user(group);
if (ret)
return -EINVAL;
- container = group->container;
- down_read(&container->group_lock);
-
ret = blocking_notifier_chain_unregister(&group->notifier, nb);
- up_read(&container->group_lock);
vfio_group_try_dissolve_container(group);
return ret;
diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
index e3d7ea1..06d0448 100644
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -897,7 +897,7 @@
struct sk_buff **queue;
int i;
- n = kvmalloc(sizeof *n, GFP_KERNEL | __GFP_REPEAT);
+ n = kvmalloc(sizeof *n, GFP_KERNEL | __GFP_RETRY_MAYFAIL);
if (!n)
return -ENOMEM;
vqs = kmalloc(VHOST_NET_VQ_MAX * sizeof(*vqs), GFP_KERNEL);
diff --git a/drivers/vhost/scsi.c b/drivers/vhost/scsi.c
index fd6c8b6..046f6d2 100644
--- a/drivers/vhost/scsi.c
+++ b/drivers/vhost/scsi.c
@@ -496,14 +496,12 @@
struct vhost_scsi *vs = container_of(work, struct vhost_scsi,
vs_event_work);
struct vhost_virtqueue *vq = &vs->vqs[VHOST_SCSI_VQ_EVT].vq;
- struct vhost_scsi_evt *evt;
+ struct vhost_scsi_evt *evt, *t;
struct llist_node *llnode;
mutex_lock(&vq->mutex);
llnode = llist_del_all(&vs->vs_event_list);
- while (llnode) {
- evt = llist_entry(llnode, struct vhost_scsi_evt, list);
- llnode = llist_next(llnode);
+ llist_for_each_entry_safe(evt, t, llnode, list) {
vhost_scsi_do_evt_work(vs, evt);
vhost_scsi_free_evt(vs, evt);
}
@@ -529,10 +527,7 @@
bitmap_zero(signal, VHOST_SCSI_MAX_VQ);
llnode = llist_del_all(&vs->vs_completion_list);
- while (llnode) {
- cmd = llist_entry(llnode, struct vhost_scsi_cmd,
- tvc_completion_list);
- llnode = llist_next(llnode);
+ llist_for_each_entry(cmd, llnode, tvc_completion_list) {
se_cmd = &cmd->tvc_se_cmd;
pr_debug("%s tv_cmd %p resid %u status %#02x\n", __func__,
@@ -1404,7 +1399,7 @@
struct vhost_virtqueue **vqs;
int r = -ENOMEM, i;
- vs = kzalloc(sizeof(*vs), GFP_KERNEL | __GFP_NOWARN | __GFP_REPEAT);
+ vs = kzalloc(sizeof(*vs), GFP_KERNEL | __GFP_NOWARN | __GFP_RETRY_MAYFAIL);
if (!vs) {
vs = vzalloc(sizeof(*vs));
if (!vs)
diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index e4613a3..9cb3f72 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -308,7 +308,6 @@
vq->avail = NULL;
vq->used = NULL;
vq->last_avail_idx = 0;
- vq->last_used_event = 0;
vq->avail_idx = 0;
vq->last_used_idx = 0;
vq->signalled_used = 0;
@@ -1402,7 +1401,7 @@
r = -EINVAL;
break;
}
- vq->last_avail_idx = vq->last_used_event = s.num;
+ vq->last_avail_idx = s.num;
/* Forget the cached index value. */
vq->avail_idx = vq->last_avail_idx;
break;
@@ -2241,6 +2240,10 @@
__u16 old, new;
__virtio16 event;
bool v;
+ /* Flush out used index updates. This is paired
+ * with the barrier that the Guest executes when enabling
+ * interrupts. */
+ smp_mb();
if (vhost_has_feature(vq, VIRTIO_F_NOTIFY_ON_EMPTY) &&
unlikely(vq->avail_idx == vq->last_avail_idx))
@@ -2248,10 +2251,6 @@
if (!vhost_has_feature(vq, VIRTIO_RING_F_EVENT_IDX)) {
__virtio16 flags;
- /* Flush out used index updates. This is paired
- * with the barrier that the Guest executes when enabling
- * interrupts. */
- smp_mb();
if (vhost_get_avail(vq, flags, &vq->avail->flags)) {
vq_err(vq, "Failed to get flags");
return true;
@@ -2266,26 +2265,11 @@
if (unlikely(!v))
return true;
- /* We're sure if the following conditions are met, there's no
- * need to notify guest:
- * 1) cached used event is ahead of new
- * 2) old to new updating does not cross cached used event. */
- if (vring_need_event(vq->last_used_event, new + vq->num, new) &&
- !vring_need_event(vq->last_used_event, new, old))
- return false;
-
- /* Flush out used index updates. This is paired
- * with the barrier that the Guest executes when enabling
- * interrupts. */
- smp_mb();
-
if (vhost_get_avail(vq, event, vhost_used_event(vq))) {
vq_err(vq, "Failed to get used event idx");
return true;
}
- vq->last_used_event = vhost16_to_cpu(vq, event);
-
- return vring_need_event(vq->last_used_event, new, old);
+ return vring_need_event(vhost16_to_cpu(vq, event), new, old);
}
/* This actually signals the guest, using eventfd. */
diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h
index f720958..bb7c29b 100644
--- a/drivers/vhost/vhost.h
+++ b/drivers/vhost/vhost.h
@@ -115,9 +115,6 @@
/* Last index we used. */
u16 last_used_idx;
- /* Last used evet we've seen */
- u16 last_used_event;
-
/* Used flags */
u16 used_flags;
diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c
index 3f63e03..c9de9c4 100644
--- a/drivers/vhost/vsock.c
+++ b/drivers/vhost/vsock.c
@@ -508,7 +508,7 @@
/* This struct is large and allocation could fail, fall back to vmalloc
* if there is no other way.
*/
- vsock = kvmalloc(sizeof(*vsock), GFP_KERNEL | __GFP_REPEAT);
+ vsock = kvmalloc(sizeof(*vsock), GFP_KERNEL | __GFP_RETRY_MAYFAIL);
if (!vsock)
return -ENOMEM;
diff --git a/drivers/video/console/mdacon.c b/drivers/video/console/mdacon.c
index ec192a1..d0d427a 100644
--- a/drivers/video/console/mdacon.c
+++ b/drivers/video/console/mdacon.c
@@ -48,7 +48,7 @@
/* description of the hardware layout */
-static unsigned long mda_vram_base; /* Base of video memory */
+static u16 *mda_vram_base; /* Base of video memory */
static unsigned long mda_vram_len; /* Size of video memory */
static unsigned int mda_num_columns; /* Number of text columns */
static unsigned int mda_num_lines; /* Number of text lines */
@@ -205,13 +205,20 @@
/* do a memory check */
- p = (u16 *) mda_vram_base;
- q = (u16 *) (mda_vram_base + 0x01000);
+ p = mda_vram_base;
+ q = mda_vram_base + 0x01000 / 2;
- p_save = scr_readw(p); q_save = scr_readw(q);
+ p_save = scr_readw(p);
+ q_save = scr_readw(q);
- scr_writew(0xAA55, p); if (scr_readw(p) == 0xAA55) count++;
- scr_writew(0x55AA, p); if (scr_readw(p) == 0x55AA) count++;
+ scr_writew(0xAA55, p);
+ if (scr_readw(p) == 0xAA55)
+ count++;
+
+ scr_writew(0x55AA, p);
+ if (scr_readw(p) == 0x55AA)
+ count++;
+
scr_writew(p_save, p);
if (count != 2) {
@@ -220,13 +227,18 @@
/* check if we have 4K or 8K */
- scr_writew(0xA55A, q); scr_writew(0x0000, p);
- if (scr_readw(q) == 0xA55A) count++;
+ scr_writew(0xA55A, q);
+ scr_writew(0x0000, p);
+ if (scr_readw(q) == 0xA55A)
+ count++;
- scr_writew(0x5AA5, q); scr_writew(0x0000, p);
- if (scr_readw(q) == 0x5AA5) count++;
+ scr_writew(0x5AA5, q);
+ scr_writew(0x0000, p);
+ if (scr_readw(q) == 0x5AA5)
+ count++;
- scr_writew(p_save, p); scr_writew(q_save, q);
+ scr_writew(p_save, p);
+ scr_writew(q_save, q);
if (count == 4) {
mda_vram_len = 0x02000;
@@ -240,14 +252,12 @@
/* Edward: These two mess `tests' mess up my cursor on bootup */
/* cursor low register */
- if (! test_mda_b(0x66, 0x0f)) {
+ if (!test_mda_b(0x66, 0x0f))
return 0;
- }
/* cursor low register */
- if (! test_mda_b(0x99, 0x0f)) {
+ if (!test_mda_b(0x99, 0x0f))
return 0;
- }
#endif
/* See if the card is a Hercules, by checking whether the vsync
@@ -257,25 +267,25 @@
p_save = q_save = inb_p(mda_status_port) & MDA_STATUS_VSYNC;
- for (count=0; count < 50000 && p_save == q_save; count++) {
+ for (count = 0; count < 50000 && p_save == q_save; count++) {
q_save = inb(mda_status_port) & MDA_STATUS_VSYNC;
udelay(2);
}
if (p_save != q_save) {
switch (inb_p(mda_status_port) & 0x70) {
- case 0x10:
- mda_type = TYPE_HERCPLUS;
- mda_type_name = "HerculesPlus";
- break;
- case 0x50:
- mda_type = TYPE_HERCCOLOR;
- mda_type_name = "HerculesColor";
- break;
- default:
- mda_type = TYPE_HERC;
- mda_type_name = "Hercules";
- break;
+ case 0x10:
+ mda_type = TYPE_HERCPLUS;
+ mda_type_name = "HerculesPlus";
+ break;
+ case 0x50:
+ mda_type = TYPE_HERCCOLOR;
+ mda_type_name = "HerculesColor";
+ break;
+ default:
+ mda_type = TYPE_HERC;
+ mda_type_name = "Hercules";
+ break;
}
}
@@ -313,7 +323,7 @@
mda_num_lines = 25;
mda_vram_len = 0x01000;
- mda_vram_base = VGA_MAP_MEM(0xb0000, mda_vram_len);
+ mda_vram_base = (u16 *)VGA_MAP_MEM(0xb0000, mda_vram_len);
mda_index_port = 0x3b4;
mda_value_port = 0x3b5;
@@ -410,17 +420,20 @@
}
}
-#define MDA_ADDR(x,y) ((u16 *) mda_vram_base + (y)*mda_num_columns + (x))
+static inline u16 *mda_addr(unsigned int x, unsigned int y)
+{
+ return mda_vram_base + y * mda_num_columns + x;
+}
static void mdacon_putc(struct vc_data *c, int ch, int y, int x)
{
- scr_writew(mda_convert_attr(ch), MDA_ADDR(x, y));
+ scr_writew(mda_convert_attr(ch), mda_addr(x, y));
}
static void mdacon_putcs(struct vc_data *c, const unsigned short *s,
int count, int y, int x)
{
- u16 *dest = MDA_ADDR(x, y);
+ u16 *dest = mda_addr(x, y);
for (; count > 0; count--) {
scr_writew(mda_convert_attr(scr_readw(s++)), dest++);
@@ -430,7 +443,7 @@
static void mdacon_clear(struct vc_data *c, int y, int x,
int height, int width)
{
- u16 *dest = MDA_ADDR(x, y);
+ u16 *dest = mda_addr(x, y);
u16 eattr = mda_convert_attr(c->vc_video_erase_char);
if (width <= 0 || height <= 0)
@@ -453,7 +466,7 @@
{
if (mda_type == TYPE_MDA) {
if (blank)
- scr_memsetw((void *)mda_vram_base,
+ scr_memsetw(mda_vram_base,
mda_convert_attr(c->vc_video_erase_char),
c->vc_screenbuf_size);
/* Tell console.c that it has to restore the screen itself */
@@ -502,16 +515,16 @@
switch (dir) {
case SM_UP:
- scr_memmovew(MDA_ADDR(0,t), MDA_ADDR(0,t+lines),
+ scr_memmovew(mda_addr(0, t), mda_addr(0, t + lines),
(b-t-lines)*mda_num_columns*2);
- scr_memsetw(MDA_ADDR(0,b-lines), eattr,
+ scr_memsetw(mda_addr(0, b - lines), eattr,
lines*mda_num_columns*2);
break;
case SM_DOWN:
- scr_memmovew(MDA_ADDR(0,t+lines), MDA_ADDR(0,t),
+ scr_memmovew(mda_addr(0, t + lines), mda_addr(0, t),
(b-t-lines)*mda_num_columns*2);
- scr_memsetw(MDA_ADDR(0,t), eattr, lines*mda_num_columns*2);
+ scr_memsetw(mda_addr(0, t), eattr, lines*mda_num_columns*2);
break;
}
diff --git a/drivers/video/fbdev/aty/atyfb_base.c b/drivers/video/fbdev/aty/atyfb_base.c
index 11026e7..b55fdac 100644
--- a/drivers/video/fbdev/aty/atyfb_base.c
+++ b/drivers/video/fbdev/aty/atyfb_base.c
@@ -802,7 +802,7 @@
{
struct atyfb_par *par = (struct atyfb_par *) info->par;
u32 xres, yres, vxres, vyres, xoffset, yoffset, bpp;
- u32 sync, vmode, vdisplay;
+ u32 sync, vmode;
u32 h_total, h_disp, h_sync_strt, h_sync_end, h_sync_dly, h_sync_wid, h_sync_pol;
u32 v_total, v_disp, v_sync_strt, v_sync_end, v_sync_wid, v_sync_pol, c_sync;
u32 pix_width, dp_pix_width, dp_chain_mask;
@@ -984,12 +984,6 @@
v_total <<= 1;
}
- vdisplay = yres;
-#ifdef CONFIG_FB_ATY_GENERIC_LCD
- if ((par->lcd_table != 0) && (crtc->lcd_gen_cntl & LCD_ON))
- vdisplay = par->lcd_height;
-#endif
-
v_disp--;
v_sync_strt--;
v_sync_end--;
@@ -1036,7 +1030,7 @@
crtc->gen_cntl |= CRTC_INTERLACE_EN;
#ifdef CONFIG_FB_ATY_GENERIC_LCD
if (par->lcd_table != 0) {
- vdisplay = yres;
+ u32 vdisplay = yres;
if (vmode & FB_VMODE_DOUBLE)
vdisplay <<= 1;
crtc->gen_cntl &= ~(CRTC2_EN | CRTC2_PIX_WIDTH);
diff --git a/drivers/video/fbdev/core/fbmem.c b/drivers/video/fbdev/core/fbmem.c
index 5324358..7a42238 100644
--- a/drivers/video/fbdev/core/fbmem.c
+++ b/drivers/video/fbdev/core/fbmem.c
@@ -1483,7 +1483,7 @@
return 0;
}
-#ifdef CONFIG_FB_PROVIDE_GET_FB_UNMAPPED_AREA
+#if defined(CONFIG_FB_PROVIDE_GET_FB_UNMAPPED_AREA) && !defined(CONFIG_MMU)
unsigned long get_fb_unmapped_area(struct file *filp,
unsigned long addr, unsigned long len,
unsigned long pgoff, unsigned long flags)
@@ -1510,7 +1510,8 @@
.open = fb_open,
.release = fb_release,
#if defined(HAVE_ARCH_FB_UNMAPPED_AREA) || \
- defined(CONFIG_FB_PROVIDE_GET_FB_UNMAPPED_AREA)
+ (defined(CONFIG_FB_PROVIDE_GET_FB_UNMAPPED_AREA) && \
+ !defined(CONFIG_MMU))
.get_unmapped_area = get_fb_unmapped_area,
#endif
#ifdef CONFIG_FB_DEFERRED_IO
diff --git a/drivers/video/fbdev/fsl-diu-fb.c b/drivers/video/fbdev/fsl-diu-fb.c
index ca3d6b3..25abbcf 100644
--- a/drivers/video/fbdev/fsl-diu-fb.c
+++ b/drivers/video/fbdev/fsl-diu-fb.c
@@ -388,7 +388,7 @@
/* Determine the DMA address of a member of the fsl_diu_data structure */
#define DMA_ADDR(p, f) ((p)->dma_addr + offsetof(struct fsl_diu_data, f))
-static struct mfb_info mfb_template[] = {
+static const struct mfb_info mfb_template[] = {
{
.index = PLANE0,
.id = "Panel0",
@@ -1868,7 +1868,7 @@
}
#endif
-static struct of_device_id fsl_diu_match[] = {
+static const struct of_device_id fsl_diu_match[] = {
#ifdef CONFIG_PPC_MPC512x
{
.compatible = "fsl,mpc5121-diu",
diff --git a/drivers/video/fbdev/intelfb/intelfbdrv.c b/drivers/video/fbdev/intelfb/intelfbdrv.c
index 6b444400..ffc3912 100644
--- a/drivers/video/fbdev/intelfb/intelfbdrv.c
+++ b/drivers/video/fbdev/intelfb/intelfbdrv.c
@@ -907,7 +907,7 @@
* helper functions *
***************************************************************/
-int __inline__ intelfb_var_to_depth(const struct fb_var_screeninfo *var)
+__inline__ int intelfb_var_to_depth(const struct fb_var_screeninfo *var)
{
DBG_MSG("intelfb_var_to_depth: bpp: %d, green.length is %d\n",
var->bits_per_pixel, var->green.length);
diff --git a/drivers/video/fbdev/matrox/matroxfb_base.c b/drivers/video/fbdev/matrox/matroxfb_base.c
index 11eb094..f6a0b9a 100644
--- a/drivers/video/fbdev/matrox/matroxfb_base.c
+++ b/drivers/video/fbdev/matrox/matroxfb_base.c
@@ -2001,7 +2001,7 @@
for (drv = matroxfb_driver_l(matroxfb_driver_list.next);
drv != matroxfb_driver_l(&matroxfb_driver_list);
drv = matroxfb_driver_l(drv->node.next)) {
- if (drv && drv->probe) {
+ if (drv->probe) {
void *p = drv->probe(minfo);
if (p) {
minfo->drivers_data[i] = p;
diff --git a/drivers/video/fbdev/omap/lcdc.c b/drivers/video/fbdev/omap/lcdc.c
index e3d9b9e..938cba0 100644
--- a/drivers/video/fbdev/omap/lcdc.c
+++ b/drivers/video/fbdev/omap/lcdc.c
@@ -79,12 +79,12 @@
unsigned long vram_size;
} lcdc;
-static void inline enable_irqs(int mask)
+static inline void enable_irqs(int mask)
{
lcdc.irq_mask |= mask;
}
-static void inline disable_irqs(int mask)
+static inline void disable_irqs(int mask)
{
lcdc.irq_mask &= ~mask;
}
@@ -466,7 +466,7 @@
}
}
-static void inline setup_regs(void)
+static inline void setup_regs(void)
{
u32 l;
struct lcd_panel *panel = lcdc.fbdev->panel;
diff --git a/drivers/video/fbdev/omap/omapfb_main.c b/drivers/video/fbdev/omap/omapfb_main.c
index f4cbfb3..3479a47 100644
--- a/drivers/video/fbdev/omap/omapfb_main.c
+++ b/drivers/video/fbdev/omap/omapfb_main.c
@@ -62,7 +62,7 @@
const char *name;
};
-static struct caps_table_struct ctrl_caps[] = {
+static const struct caps_table_struct ctrl_caps[] = {
{ OMAPFB_CAPS_MANUAL_UPDATE, "manual update" },
{ OMAPFB_CAPS_TEARSYNC, "tearing synchronization" },
{ OMAPFB_CAPS_PLANE_RELOCATE_MEM, "relocate plane memory" },
@@ -74,7 +74,7 @@
{ OMAPFB_CAPS_SET_BACKLIGHT, "backlight setting" },
};
-static struct caps_table_struct color_caps[] = {
+static const struct caps_table_struct color_caps[] = {
{ 1 << OMAPFB_COLOR_RGB565, "RGB565", },
{ 1 << OMAPFB_COLOR_YUV422, "YUV422", },
{ 1 << OMAPFB_COLOR_YUV420, "YUV420", },
@@ -1384,7 +1384,7 @@
NULL,
};
-static struct attribute_group panel_attr_grp = {
+static const struct attribute_group panel_attr_grp = {
.name = "panel",
.attrs = panel_attrs,
};
@@ -1406,7 +1406,7 @@
NULL,
};
-static struct attribute_group ctrl_attr_grp = {
+static const struct attribute_group ctrl_attr_grp = {
.name = "ctrl",
.attrs = ctrl_attrs,
};
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c
index fd2b372d..bef4315 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c
@@ -100,7 +100,7 @@
{
unsigned long wait = ddata->hw_guard_end - jiffies;
- if ((long)wait > 0 && wait <= ddata->hw_guard_wait) {
+ if ((long)wait > 0 && time_before_eq(wait, ddata->hw_guard_wait)) {
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout(wait);
}
@@ -559,7 +559,7 @@
NULL,
};
-static struct attribute_group dsicm_attr_group = {
+static const struct attribute_group dsicm_attr_group = {
.attrs = dsicm_attrs,
};
diff --git a/drivers/video/fbdev/omap2/omapfb/dss/manager-sysfs.c b/drivers/video/fbdev/omap2/omapfb/dss/manager-sysfs.c
index 9e2a67f..44b96af 100644
--- a/drivers/video/fbdev/omap2/omapfb/dss/manager-sysfs.c
+++ b/drivers/video/fbdev/omap2/omapfb/dss/manager-sysfs.c
@@ -182,22 +182,16 @@
static ssize_t manager_trans_key_type_store(struct omap_overlay_manager *mgr,
const char *buf, size_t size)
{
- enum omap_dss_trans_key_type key_type;
struct omap_overlay_manager_info info;
int r;
- for (key_type = OMAP_DSS_COLOR_KEY_GFX_DST;
- key_type < ARRAY_SIZE(trans_key_type_str); key_type++) {
- if (sysfs_streq(buf, trans_key_type_str[key_type]))
- break;
- }
-
- if (key_type == ARRAY_SIZE(trans_key_type_str))
- return -EINVAL;
+ r = sysfs_match_string(trans_key_type_str, buf);
+ if (r < 0)
+ return r;
mgr->get_manager_info(mgr, &info);
- info.trans_key_type = key_type;
+ info.trans_key_type = r;
r = mgr->set_manager_info(mgr, &info);
if (r)
diff --git a/drivers/video/fbdev/pxafb.c b/drivers/video/fbdev/pxafb.c
index b21a89b..c3d49e1 100644
--- a/drivers/video/fbdev/pxafb.c
+++ b/drivers/video/fbdev/pxafb.c
@@ -1436,7 +1436,10 @@
pr_debug("reg_lccr3 0x%08x\n", (unsigned int) fbi->reg_lccr3);
/* enable LCD controller clock */
- clk_prepare_enable(fbi->clk);
+ if (clk_prepare_enable(fbi->clk)) {
+ pr_err("%s: Failed to prepare clock\n", __func__);
+ return;
+ }
if (fbi->lccr0 & LCCR0_LCDT)
return;
diff --git a/drivers/video/fbdev/sh_mobile_lcdcfb.c b/drivers/video/fbdev/sh_mobile_lcdcfb.c
index 885ee3a..c3a4650 100644
--- a/drivers/video/fbdev/sh_mobile_lcdcfb.c
+++ b/drivers/video/fbdev/sh_mobile_lcdcfb.c
@@ -2301,7 +2301,7 @@
return (info->bl_dev == bdev);
}
-static struct backlight_ops sh_mobile_lcdc_bl_ops = {
+static const struct backlight_ops sh_mobile_lcdc_bl_ops = {
.options = BL_CORE_SUSPENDRESUME,
.update_status = sh_mobile_lcdc_update_bl,
.get_brightness = sh_mobile_lcdc_get_brightness,
diff --git a/drivers/video/fbdev/uvesafb.c b/drivers/video/fbdev/uvesafb.c
index 98af9e0..dc0e8d9 100644
--- a/drivers/video/fbdev/uvesafb.c
+++ b/drivers/video/fbdev/uvesafb.c
@@ -5,6 +5,9 @@
* Loosely based upon the vesafb driver.
*
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/init.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
@@ -149,8 +152,8 @@
* allowed by connector.
*/
if (sizeof(*m) + len > CONNECTOR_MAX_MSG_SIZE) {
- printk(KERN_WARNING "uvesafb: message too long (%d), "
- "can't execute task\n", (int)(sizeof(*m) + len));
+ pr_warn("message too long (%d), can't execute task\n",
+ (int)(sizeof(*m) + len));
return -E2BIG;
}
@@ -198,10 +201,8 @@
*/
err = uvesafb_helper_start();
if (err) {
- printk(KERN_ERR "uvesafb: failed to execute %s\n",
- v86d_path);
- printk(KERN_ERR "uvesafb: make sure that the v86d "
- "helper is installed and executable\n");
+ pr_err("failed to execute %s\n", v86d_path);
+ pr_err("make sure that the v86d helper is installed and executable\n");
} else {
v86d_started = 1;
err = cn_netlink_send(m, 0, 0, gfp_any());
@@ -375,9 +376,8 @@
err = uvesafb_exec(task);
if (err || (task->t.regs.eax & 0xffff) != 0x004f) {
- printk(KERN_WARNING "uvesafb: VBE get state call "
- "failed (eax=0x%x, err=%d)\n",
- task->t.regs.eax, err);
+ pr_warn("VBE get state call failed (eax=0x%x, err=%d)\n",
+ task->t.regs.eax, err);
kfree(state);
state = NULL;
}
@@ -407,9 +407,8 @@
err = uvesafb_exec(task);
if (err || (task->t.regs.eax & 0xffff) != 0x004f)
- printk(KERN_WARNING "uvesafb: VBE state restore call "
- "failed (eax=0x%x, err=%d)\n",
- task->t.regs.eax, err);
+ pr_warn("VBE state restore call failed (eax=0x%x, err=%d)\n",
+ task->t.regs.eax, err);
uvesafb_free(task);
}
@@ -427,24 +426,22 @@
err = uvesafb_exec(task);
if (err || (task->t.regs.eax & 0xffff) != 0x004f) {
- printk(KERN_ERR "uvesafb: Getting VBE info block failed "
- "(eax=0x%x, err=%d)\n", (u32)task->t.regs.eax,
- err);
+ pr_err("Getting VBE info block failed (eax=0x%x, err=%d)\n",
+ (u32)task->t.regs.eax, err);
return -EINVAL;
}
if (par->vbe_ib.vbe_version < 0x0200) {
- printk(KERN_ERR "uvesafb: Sorry, pre-VBE 2.0 cards are "
- "not supported.\n");
+ pr_err("Sorry, pre-VBE 2.0 cards are not supported\n");
return -EINVAL;
}
if (!par->vbe_ib.mode_list_ptr) {
- printk(KERN_ERR "uvesafb: Missing mode list!\n");
+ pr_err("Missing mode list!\n");
return -EINVAL;
}
- printk(KERN_INFO "uvesafb: ");
+ pr_info("");
/*
* Convert string pointers and the mode list pointer into
@@ -452,23 +449,24 @@
* video adapter and its vendor.
*/
if (par->vbe_ib.oem_vendor_name_ptr)
- printk("%s, ",
+ pr_cont("%s, ",
((char *)task->buf) + par->vbe_ib.oem_vendor_name_ptr);
if (par->vbe_ib.oem_product_name_ptr)
- printk("%s, ",
+ pr_cont("%s, ",
((char *)task->buf) + par->vbe_ib.oem_product_name_ptr);
if (par->vbe_ib.oem_product_rev_ptr)
- printk("%s, ",
+ pr_cont("%s, ",
((char *)task->buf) + par->vbe_ib.oem_product_rev_ptr);
if (par->vbe_ib.oem_string_ptr)
- printk("OEM: %s, ",
+ pr_cont("OEM: %s, ",
((char *)task->buf) + par->vbe_ib.oem_string_ptr);
- printk("VBE v%d.%d\n", ((par->vbe_ib.vbe_version & 0xff00) >> 8),
- par->vbe_ib.vbe_version & 0xff);
+ pr_cont("VBE v%d.%d\n",
+ (par->vbe_ib.vbe_version & 0xff00) >> 8,
+ par->vbe_ib.vbe_version & 0xff);
return 0;
}
@@ -507,8 +505,7 @@
err = uvesafb_exec(task);
if (err || (task->t.regs.eax & 0xffff) != 0x004f) {
- printk(KERN_WARNING "uvesafb: Getting mode info block "
- "for mode 0x%x failed (eax=0x%x, err=%d)\n",
+ pr_warn("Getting mode info block for mode 0x%x failed (eax=0x%x, err=%d)\n",
*mode, (u32)task->t.regs.eax, err);
mode++;
par->vbe_modes_cnt--;
@@ -569,23 +566,20 @@
+ task->t.regs.edi);
par->pmi_start = (u8 *)par->pmi_base + par->pmi_base[1];
par->pmi_pal = (u8 *)par->pmi_base + par->pmi_base[2];
- printk(KERN_INFO "uvesafb: protected mode interface info at "
- "%04x:%04x\n",
- (u16)task->t.regs.es, (u16)task->t.regs.edi);
- printk(KERN_INFO "uvesafb: pmi: set display start = %p, "
- "set palette = %p\n", par->pmi_start,
- par->pmi_pal);
+ pr_info("protected mode interface info at %04x:%04x\n",
+ (u16)task->t.regs.es, (u16)task->t.regs.edi);
+ pr_info("pmi: set display start = %p, set palette = %p\n",
+ par->pmi_start, par->pmi_pal);
if (par->pmi_base[3]) {
- printk(KERN_INFO "uvesafb: pmi: ports = ");
+ pr_info("pmi: ports =");
for (i = par->pmi_base[3]/2;
par->pmi_base[i] != 0xffff; i++)
- printk("%x ", par->pmi_base[i]);
- printk("\n");
+ pr_cont(" %x", par->pmi_base[i]);
+ pr_cont("\n");
if (par->pmi_base[i] != 0xffff) {
- printk(KERN_INFO "uvesafb: can't handle memory"
- " requests, pmi disabled\n");
+ pr_info("can't handle memory requests, pmi disabled\n");
par->ypan = par->pmi_setpal = 0;
}
}
@@ -634,17 +628,13 @@
return -EINVAL;
if ((task->t.regs.ebx & 0x3) == 3) {
- printk(KERN_INFO "uvesafb: VBIOS/hardware supports both "
- "DDC1 and DDC2 transfers\n");
+ pr_info("VBIOS/hardware supports both DDC1 and DDC2 transfers\n");
} else if ((task->t.regs.ebx & 0x3) == 2) {
- printk(KERN_INFO "uvesafb: VBIOS/hardware supports DDC2 "
- "transfers\n");
+ pr_info("VBIOS/hardware supports DDC2 transfers\n");
} else if ((task->t.regs.ebx & 0x3) == 1) {
- printk(KERN_INFO "uvesafb: VBIOS/hardware supports DDC1 "
- "transfers\n");
+ pr_info("VBIOS/hardware supports DDC1 transfers\n");
} else {
- printk(KERN_INFO "uvesafb: VBIOS/hardware doesn't support "
- "DDC transfers\n");
+ pr_info("VBIOS/hardware doesn't support DDC transfers\n");
return -EINVAL;
}
@@ -718,14 +708,12 @@
}
if (info->monspecs.gtf)
- printk(KERN_INFO
- "uvesafb: monitor limits: vf = %d Hz, hf = %d kHz, "
- "clk = %d MHz\n", info->monspecs.vfmax,
+ pr_info("monitor limits: vf = %d Hz, hf = %d kHz, clk = %d MHz\n",
+ info->monspecs.vfmax,
(int)(info->monspecs.hfmax / 1000),
(int)(info->monspecs.dclkmax / 1000000));
else
- printk(KERN_INFO "uvesafb: no monitor limits have been set, "
- "default refresh rate will be used\n");
+ pr_info("no monitor limits have been set, default refresh rate will be used\n");
/* Add VBE modes to the modelist. */
for (i = 0; i < par->vbe_modes_cnt; i++) {
@@ -779,8 +767,7 @@
err = uvesafb_exec(task);
if (err || (task->t.regs.eax & 0xffff) != 0x004f) {
- printk(KERN_WARNING "uvesafb: VBE state buffer size "
- "cannot be determined (eax=0x%x, err=%d)\n",
+ pr_warn("VBE state buffer size cannot be determined (eax=0x%x, err=%d)\n",
task->t.regs.eax, err);
par->vbe_state_size = 0;
return;
@@ -815,8 +802,7 @@
if (par->pmi_setpal || par->ypan) {
if (__supported_pte_mask & _PAGE_NX) {
par->pmi_setpal = par->ypan = 0;
- printk(KERN_WARNING "uvesafb: NX protection is active, "
- "better not use the PMI.\n");
+ pr_warn("NX protection is active, better not use the PMI\n");
} else {
uvesafb_vbe_getpmi(task, par);
}
@@ -859,8 +845,7 @@
goto gotmode;
}
}
- printk(KERN_INFO "uvesafb: requested VBE mode 0x%x is "
- "unavailable\n", vbemode);
+ pr_info("requested VBE mode 0x%x is unavailable\n", vbemode);
vbemode = 0;
}
@@ -1181,8 +1166,8 @@
if (!cnt && par->vbe_state_size) {
buf = uvesafb_vbe_state_save(par);
if (IS_ERR(buf)) {
- printk(KERN_WARNING "uvesafb: save hardware state"
- "failed, error code is %ld!\n", PTR_ERR(buf));
+ pr_warn("save hardware state failed, error code is %ld!\n",
+ PTR_ERR(buf));
} else {
par->vbe_state_orig = buf;
}
@@ -1293,17 +1278,16 @@
* use our own timings. Try again with the default timings.
*/
if (crtc != NULL) {
- printk(KERN_WARNING "uvesafb: mode switch failed "
- "(eax=0x%x, err=%d). Trying again with "
- "default timings.\n", task->t.regs.eax, err);
+ pr_warn("mode switch failed (eax=0x%x, err=%d) - trying again with default timings\n",
+ task->t.regs.eax, err);
uvesafb_reset(task);
kfree(crtc);
crtc = NULL;
info->var.pixclock = 0;
goto setmode;
} else {
- printk(KERN_ERR "uvesafb: mode switch failed (eax="
- "0x%x, err=%d)\n", task->t.regs.eax, err);
+ pr_err("mode switch failed (eax=0x%x, err=%d)\n",
+ task->t.regs.eax, err);
err = -EINVAL;
goto out;
}
@@ -1510,13 +1494,11 @@
mode->bytes_per_scan_line;
if (par->ypan && info->var.yres_virtual > info->var.yres) {
- printk(KERN_INFO "uvesafb: scrolling: %s "
- "using protected mode interface, "
- "yres_virtual=%d\n",
+ pr_info("scrolling: %s using protected mode interface, yres_virtual=%d\n",
(par->ypan > 1) ? "ywrap" : "ypan",
info->var.yres_virtual);
} else {
- printk(KERN_INFO "uvesafb: scrolling: redraw\n");
+ pr_info("scrolling: redraw\n");
info->var.yres_virtual = info->var.yres;
par->ypan = 0;
}
@@ -1704,7 +1686,7 @@
err = uvesafb_vbe_init(info);
if (err) {
- printk(KERN_ERR "uvesafb: vbe_init() failed with %d\n", err);
+ pr_err("vbe_init() failed with %d\n", err);
goto out;
}
@@ -1726,15 +1708,15 @@
uvesafb_init_info(info, mode);
if (!request_region(0x3c0, 32, "uvesafb")) {
- printk(KERN_ERR "uvesafb: request region 0x3c0-0x3e0 failed\n");
+ pr_err("request region 0x3c0-0x3e0 failed\n");
err = -EIO;
goto out_mode;
}
if (!request_mem_region(info->fix.smem_start, info->fix.smem_len,
"uvesafb")) {
- printk(KERN_ERR "uvesafb: cannot reserve video memory at "
- "0x%lx\n", info->fix.smem_start);
+ pr_err("cannot reserve video memory at 0x%lx\n",
+ info->fix.smem_start);
err = -EIO;
goto out_reg;
}
@@ -1743,10 +1725,8 @@
uvesafb_ioremap(info);
if (!info->screen_base) {
- printk(KERN_ERR
- "uvesafb: abort, cannot ioremap 0x%x bytes of video "
- "memory at 0x%lx\n",
- info->fix.smem_len, info->fix.smem_start);
+ pr_err("abort, cannot ioremap 0x%x bytes of video memory at 0x%lx\n",
+ info->fix.smem_len, info->fix.smem_start);
err = -EIO;
goto out_mem;
}
@@ -1754,16 +1734,14 @@
platform_set_drvdata(dev, info);
if (register_framebuffer(info) < 0) {
- printk(KERN_ERR
- "uvesafb: failed to register framebuffer device\n");
+ pr_err("failed to register framebuffer device\n");
err = -EINVAL;
goto out_unmap;
}
- printk(KERN_INFO "uvesafb: framebuffer at 0x%lx, mapped to 0x%p, "
- "using %dk, total %dk\n", info->fix.smem_start,
- info->screen_base, info->fix.smem_len/1024,
- par->vbe_ib.total_memory * 64);
+ pr_info("framebuffer at 0x%lx, mapped to 0x%p, using %dk, total %dk\n",
+ info->fix.smem_start, info->screen_base,
+ info->fix.smem_len / 1024, par->vbe_ib.total_memory * 64);
fb_info(info, "%s frame buffer device\n", info->fix.id);
err = sysfs_create_group(&dev->dev.kobj, &uvesafb_dev_attgrp);
@@ -1871,8 +1849,7 @@
else if (this_opt[0] >= '0' && this_opt[0] <= '9') {
mode_option = this_opt;
} else {
- printk(KERN_WARNING
- "uvesafb: unrecognized option %s\n", this_opt);
+ pr_warn("unrecognized option %s\n", this_opt);
}
}
@@ -1931,8 +1908,7 @@
err = driver_create_file(&uvesafb_driver.driver,
&driver_attr_v86d);
if (err) {
- printk(KERN_WARNING "uvesafb: failed to register "
- "attributes\n");
+ pr_warn("failed to register attributes\n");
err = 0;
}
}
diff --git a/drivers/video/fbdev/vermilion/cr_pll.c b/drivers/video/fbdev/vermilion/cr_pll.c
index ebc6e6e..ba105c8 100644
--- a/drivers/video/fbdev/vermilion/cr_pll.c
+++ b/drivers/video/fbdev/vermilion/cr_pll.c
@@ -185,6 +185,7 @@
if (err) {
printk(KERN_ERR
"Carillo Ranch failed to initialize vml_sys.\n");
+ iounmap(mch_regs_base);
pci_dev_put(mch_dev);
return err;
}
diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
index 22caf80..f0b3a0b 100644
--- a/drivers/virtio/virtio_balloon.c
+++ b/drivers/virtio/virtio_balloon.c
@@ -104,12 +104,6 @@
return pfn * VIRTIO_BALLOON_PAGES_PER_PAGE;
}
-static struct page *balloon_pfn_to_page(u32 pfn)
-{
- BUG_ON(pfn % VIRTIO_BALLOON_PAGES_PER_PAGE);
- return pfn_to_page(pfn / VIRTIO_BALLOON_PAGES_PER_PAGE);
-}
-
static void balloon_ack(struct virtqueue *vq)
{
struct virtio_balloon *vb = vq->vdev->priv;
@@ -138,8 +132,10 @@
{
unsigned int i;
- /* Set balloon pfns pointing at this page.
- * Note that the first pfn points at start of the page. */
+ /*
+ * Set balloon pfns pointing at this page.
+ * Note that the first pfn points at start of the page.
+ */
for (i = 0; i < VIRTIO_BALLOON_PAGES_PER_PAGE; i++)
pfns[i] = cpu_to_virtio32(vb->vdev,
page_to_balloon_pfn(page) + i);
@@ -182,18 +178,16 @@
return num_allocated_pages;
}
-static void release_pages_balloon(struct virtio_balloon *vb)
+static void release_pages_balloon(struct virtio_balloon *vb,
+ struct list_head *pages)
{
- unsigned int i;
- struct page *page;
+ struct page *page, *next;
- /* Find pfns pointing at start of each page, get pages and free them. */
- for (i = 0; i < vb->num_pfns; i += VIRTIO_BALLOON_PAGES_PER_PAGE) {
- page = balloon_pfn_to_page(virtio32_to_cpu(vb->vdev,
- vb->pfns[i]));
+ list_for_each_entry_safe(page, next, pages, lru) {
if (!virtio_has_feature(vb->vdev,
VIRTIO_BALLOON_F_DEFLATE_ON_OOM))
adjust_managed_page_count(page, 1);
+ list_del(&page->lru);
put_page(page); /* balloon reference */
}
}
@@ -203,6 +197,7 @@
unsigned num_freed_pages;
struct page *page;
struct balloon_dev_info *vb_dev_info = &vb->vb_dev_info;
+ LIST_HEAD(pages);
/* We can only do one array worth at a time. */
num = min(num, ARRAY_SIZE(vb->pfns));
@@ -216,6 +211,7 @@
if (!page)
break;
set_page_pfns(vb, vb->pfns + vb->num_pfns, page);
+ list_add(&page->lru, &pages);
vb->num_pages -= VIRTIO_BALLOON_PAGES_PER_PAGE;
}
@@ -227,7 +223,7 @@
*/
if (vb->num_pfns != 0)
tell_host(vb, vb->deflate_vq);
- release_pages_balloon(vb);
+ release_pages_balloon(vb, &pages);
mutex_unlock(&vb->balloon_lock);
return num_freed_pages;
}
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index 5e1b548..27cbc1e 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -296,7 +296,6 @@
}
#endif
- BUG_ON(total_sg > vq->vring.num);
BUG_ON(total_sg == 0);
head = vq->free_head;
@@ -305,8 +304,10 @@
* buffers, then go indirect. FIXME: tune this threshold */
if (vq->indirect && total_sg > 1 && vq->vq.num_free)
desc = alloc_indirect(_vq, total_sg, gfp);
- else
+ else {
desc = NULL;
+ WARN_ON_ONCE(total_sg > vq->vring.num && !vq->indirect);
+ }
if (desc) {
/* Use a single buffer which doesn't continue */
diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c
index 3612542..83fc9aa 100644
--- a/drivers/w1/masters/omap_hdq.c
+++ b/drivers/w1/masters/omap_hdq.c
@@ -704,7 +704,8 @@
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
- ret = -ENXIO;
+ dev_dbg(&pdev->dev, "Failed to get IRQ: %d\n", irq);
+ ret = irq;
goto err_irq;
}
diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c
index 95ea7e6..74471e7 100644
--- a/drivers/w1/w1.c
+++ b/drivers/w1/w1.c
@@ -728,6 +728,7 @@
memcpy(&sl->reg_num, rn, sizeof(sl->reg_num));
atomic_set(&sl->refcnt, 1);
atomic_inc(&sl->master->refcnt);
+ dev->slave_count++;
/* slave modules need to be loaded in a context with unlocked mutex */
mutex_unlock(&dev->mutex);
@@ -747,11 +748,11 @@
sl->family = f;
-
err = __w1_attach_slave_device(sl);
if (err < 0) {
dev_err(&dev->dev, "%s: Attaching %s failed.\n", __func__,
sl->name);
+ dev->slave_count--;
w1_family_put(sl->family);
atomic_dec(&sl->master->refcnt);
kfree(sl);
@@ -759,7 +760,6 @@
}
sl->ttl = dev->slave_ttl;
- dev->slave_count++;
memcpy(msg.id.id, rn, sizeof(msg.id));
msg.type = W1_SLAVE_ADD;
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index 50dcb68..ab60925 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -780,6 +780,9 @@
}
#endif
+ /* Init the xen-balloon driver. */
+ xen_balloon_init();
+
return 0;
}
subsys_initcall(balloon_init);
diff --git a/drivers/xen/events/events_base.c b/drivers/xen/events/events_base.c
index b241bfa..bae1f5d3 100644
--- a/drivers/xen/events/events_base.c
+++ b/drivers/xen/events/events_base.c
@@ -343,14 +343,6 @@
info->cpu = cpu;
}
-static void xen_evtchn_mask_all(void)
-{
- unsigned int evtchn;
-
- for (evtchn = 0; evtchn < xen_evtchn_nr_channels(); evtchn++)
- mask_evtchn(evtchn);
-}
-
/**
* notify_remote_via_irq - send event to remote end of event channel via irq
* @irq: irq of event channel to send event to
@@ -1573,7 +1565,6 @@
struct irq_info *info;
/* New event-channel space is not 'live' yet. */
- xen_evtchn_mask_all();
xen_evtchn_resume();
/* No IRQ <-> event-channel mappings. */
@@ -1681,6 +1672,7 @@
void __init xen_init_IRQ(void)
{
int ret = -EINVAL;
+ unsigned int evtchn;
if (fifo_events)
ret = xen_evtchn_fifo_init();
@@ -1692,7 +1684,8 @@
BUG_ON(!evtchn_to_irq);
/* No event channels are 'live' right now. */
- xen_evtchn_mask_all();
+ for (evtchn = 0; evtchn < xen_evtchn_nr_channels(); evtchn++)
+ mask_evtchn(evtchn);
pirq_needs_eoi = pirq_needs_eoi_flag;
diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c
index d6786b8..2c6a911 100644
--- a/drivers/xen/grant-table.c
+++ b/drivers/xen/grant-table.c
@@ -42,6 +42,7 @@
#include <linux/delay.h>
#include <linux/hardirq.h>
#include <linux/workqueue.h>
+#include <linux/ratelimit.h>
#include <xen/xen.h>
#include <xen/interface/xen.h>
@@ -1072,8 +1073,14 @@
cur = nr_grant_frames;
extra = ((req_entries + (grefs_per_grant_frame-1)) /
grefs_per_grant_frame);
- if (cur + extra > gnttab_max_grant_frames())
+ if (cur + extra > gnttab_max_grant_frames()) {
+ pr_warn_ratelimited("xen/grant-table: max_grant_frames reached"
+ " cur=%u extra=%u limit=%u"
+ " gnttab_free_count=%u req_entries=%u\n",
+ cur, extra, gnttab_max_grant_frames(),
+ gnttab_free_count, req_entries);
return -ENOSPC;
+ }
rc = gnttab_map(cur, cur + extra - 1);
if (rc == 0)
diff --git a/drivers/xen/xen-balloon.c b/drivers/xen/xen-balloon.c
index e7715cb..e89136a 100644
--- a/drivers/xen/xen-balloon.c
+++ b/drivers/xen/xen-balloon.c
@@ -59,6 +59,8 @@
{
unsigned long long new_target;
int err;
+ static bool watch_fired;
+ static long target_diff;
err = xenbus_scanf(XBT_NIL, "memory", "target", "%llu", &new_target);
if (err != 1) {
@@ -69,7 +71,14 @@
/* The given memory/target value is in KiB, so it needs converting to
* pages. PAGE_SHIFT converts bytes to pages, hence PAGE_SHIFT - 10.
*/
- balloon_set_new_target(new_target >> (PAGE_SHIFT - 10));
+ new_target >>= PAGE_SHIFT - 10;
+ if (watch_fired) {
+ balloon_set_new_target(new_target - target_diff);
+ return;
+ }
+
+ watch_fired = true;
+ target_diff = new_target - balloon_stats.target_pages;
}
static struct xenbus_watch target_watch = {
.node = "memory/target",
@@ -94,22 +103,15 @@
.notifier_call = balloon_init_watcher,
};
-static int __init balloon_init(void)
+void xen_balloon_init(void)
{
- if (!xen_domain())
- return -ENODEV;
-
- pr_info("Initialising balloon driver\n");
-
register_balloon(&balloon_dev);
register_xen_selfballooning(&balloon_dev);
register_xenstore_notifier(&xenstore_notifier);
-
- return 0;
}
-subsys_initcall(balloon_init);
+EXPORT_SYMBOL_GPL(xen_balloon_init);
#define BALLOON_SHOW(name, format, args...) \
static ssize_t show_##name(struct device *dev, \
diff --git a/drivers/xen/xen-scsiback.c b/drivers/xen/xen-scsiback.c
index d6950e0..7bc88fd 100644
--- a/drivers/xen/xen-scsiback.c
+++ b/drivers/xen/xen-scsiback.c
@@ -134,11 +134,8 @@
struct page *pages[VSCSI_MAX_GRANTS];
struct se_cmd se_cmd;
-};
-struct scsiback_tmr {
- atomic_t tmr_complete;
- wait_queue_head_t tmr_wait;
+ struct completion tmr_done;
};
#define VSCSI_DEFAULT_SESSION_TAGS 128
@@ -599,36 +596,28 @@
struct scsiback_tpg *tpg = pending_req->v2p->tpg;
struct scsiback_nexus *nexus = tpg->tpg_nexus;
struct se_cmd *se_cmd = &pending_req->se_cmd;
- struct scsiback_tmr *tmr;
u64 unpacked_lun = pending_req->v2p->lun;
int rc, err = FAILED;
- tmr = kzalloc(sizeof(struct scsiback_tmr), GFP_KERNEL);
- if (!tmr) {
- target_put_sess_cmd(se_cmd);
- goto err;
- }
-
- init_waitqueue_head(&tmr->tmr_wait);
+ init_completion(&pending_req->tmr_done);
rc = target_submit_tmr(&pending_req->se_cmd, nexus->tvn_se_sess,
&pending_req->sense_buffer[0],
- unpacked_lun, tmr, act, GFP_KERNEL,
+ unpacked_lun, NULL, act, GFP_KERNEL,
tag, TARGET_SCF_ACK_KREF);
if (rc)
goto err;
- wait_event(tmr->tmr_wait, atomic_read(&tmr->tmr_complete));
+ wait_for_completion(&pending_req->tmr_done);
err = (se_cmd->se_tmr_req->response == TMR_FUNCTION_COMPLETE) ?
SUCCESS : FAILED;
scsiback_do_resp_with_sense(NULL, err, 0, pending_req);
- transport_generic_free_cmd(&pending_req->se_cmd, 1);
+ transport_generic_free_cmd(&pending_req->se_cmd, 0);
return;
+
err:
- if (tmr)
- kfree(tmr);
scsiback_do_resp_with_sense(NULL, err, 0, pending_req);
}
@@ -1389,12 +1378,6 @@
static void scsiback_release_cmd(struct se_cmd *se_cmd)
{
struct se_session *se_sess = se_cmd->se_sess;
- struct se_tmr_req *se_tmr = se_cmd->se_tmr_req;
-
- if (se_tmr && se_cmd->se_cmd_flags & SCF_SCSI_TMR_CDB) {
- struct scsiback_tmr *tmr = se_tmr->fabric_tmr_ptr;
- kfree(tmr);
- }
percpu_ida_free(&se_sess->sess_tag_pool, se_cmd->map_tag);
}
@@ -1455,11 +1438,10 @@
static void scsiback_queue_tm_rsp(struct se_cmd *se_cmd)
{
- struct se_tmr_req *se_tmr = se_cmd->se_tmr_req;
- struct scsiback_tmr *tmr = se_tmr->fabric_tmr_ptr;
+ struct vscsibk_pend *pending_req = container_of(se_cmd,
+ struct vscsibk_pend, se_cmd);
- atomic_set(&tmr->tmr_complete, 1);
- wake_up(&tmr->tmr_wait);
+ complete(&pending_req->tmr_done);
}
static void scsiback_aborted_task(struct se_cmd *se_cmd)
diff --git a/drivers/xen/xen-selfballoon.c b/drivers/xen/xen-selfballoon.c
index 6662071..a67e955 100644
--- a/drivers/xen/xen-selfballoon.c
+++ b/drivers/xen/xen-selfballoon.c
@@ -151,8 +151,8 @@
static void frontswap_selfshrink(void)
{
static unsigned long cur_frontswap_pages;
- static unsigned long last_frontswap_pages;
- static unsigned long tgt_frontswap_pages;
+ unsigned long last_frontswap_pages;
+ unsigned long tgt_frontswap_pages;
last_frontswap_pages = cur_frontswap_pages;
cur_frontswap_pages = frontswap_curr_pages();
diff --git a/drivers/xen/xenfs/super.c b/drivers/xen/xenfs/super.c
index 967f069..71ddfb4 100644
--- a/drivers/xen/xenfs/super.c
+++ b/drivers/xen/xenfs/super.c
@@ -87,7 +87,6 @@
if (xen_domain())
return register_filesystem(&xenfs_type);
- pr_info("not registering filesystem on non-xen platform\n");
return 0;
}
diff --git a/fs/9p/v9fs.c b/fs/9p/v9fs.c
index c202930..8fb89dd 100644
--- a/fs/9p/v9fs.c
+++ b/fs/9p/v9fs.c
@@ -33,6 +33,7 @@
#include <linux/parser.h>
#include <linux/idr.h>
#include <linux/slab.h>
+#include <linux/seq_file.h>
#include <net/9p/9p.h>
#include <net/9p/client.h>
#include <net/9p/transport.h>
@@ -82,6 +83,13 @@
{Opt_err, NULL}
};
+static const char *const v9fs_cache_modes[nr__p9_cache_modes] = {
+ [CACHE_NONE] = "none",
+ [CACHE_MMAP] = "mmap",
+ [CACHE_LOOSE] = "loose",
+ [CACHE_FSCACHE] = "fscache",
+};
+
/* Interpret mount options for cache mode */
static int get_cache_mode(char *s)
{
@@ -104,6 +112,58 @@
return version;
}
+/*
+ * Display the mount options in /proc/mounts.
+ */
+int v9fs_show_options(struct seq_file *m, struct dentry *root)
+{
+ struct v9fs_session_info *v9ses = root->d_sb->s_fs_info;
+
+ if (v9ses->debug)
+ seq_printf(m, ",debug=%x", v9ses->debug);
+ if (!uid_eq(v9ses->dfltuid, V9FS_DEFUID))
+ seq_printf(m, ",dfltuid=%u",
+ from_kuid_munged(&init_user_ns, v9ses->dfltuid));
+ if (!gid_eq(v9ses->dfltgid, V9FS_DEFGID))
+ seq_printf(m, ",dfltgid=%u",
+ from_kgid_munged(&init_user_ns, v9ses->dfltgid));
+ if (v9ses->afid != ~0)
+ seq_printf(m, ",afid=%u", v9ses->afid);
+ if (strcmp(v9ses->uname, V9FS_DEFUSER) != 0)
+ seq_printf(m, ",uname=%s", v9ses->uname);
+ if (strcmp(v9ses->aname, V9FS_DEFANAME) != 0)
+ seq_printf(m, ",aname=%s", v9ses->aname);
+ if (v9ses->nodev)
+ seq_puts(m, ",nodevmap");
+ if (v9ses->cache)
+ seq_printf(m, ",%s", v9fs_cache_modes[v9ses->cache]);
+#ifdef CONFIG_9P_FSCACHE
+ if (v9ses->cachetag && v9ses->cache == CACHE_FSCACHE)
+ seq_printf(m, ",cachetag=%s", v9ses->cachetag);
+#endif
+
+ switch (v9ses->flags & V9FS_ACCESS_MASK) {
+ case V9FS_ACCESS_USER:
+ seq_puts(m, ",access=user");
+ break;
+ case V9FS_ACCESS_ANY:
+ seq_puts(m, ",access=any");
+ break;
+ case V9FS_ACCESS_CLIENT:
+ seq_puts(m, ",access=client");
+ break;
+ case V9FS_ACCESS_SINGLE:
+ seq_printf(m, ",access=%u",
+ from_kuid_munged(&init_user_ns, v9ses->uid));
+ break;
+ }
+
+ if (v9ses->flags & V9FS_POSIX_ACL)
+ seq_puts(m, ",posixacl");
+
+ return p9_show_client_options(m, v9ses->clnt);
+}
+
/**
* v9fs_parse_options - parse mount options into session structure
* @v9ses: existing v9fs session information
@@ -230,6 +290,7 @@
break;
case Opt_cachetag:
#ifdef CONFIG_9P_FSCACHE
+ kfree(v9ses->cachetag);
v9ses->cachetag = match_strdup(&args[0]);
#endif
break;
diff --git a/fs/9p/v9fs.h b/fs/9p/v9fs.h
index 76eaf49..982e017 100644
--- a/fs/9p/v9fs.h
+++ b/fs/9p/v9fs.h
@@ -67,6 +67,7 @@
CACHE_MMAP,
CACHE_LOOSE,
CACHE_FSCACHE,
+ nr__p9_cache_modes
};
/**
@@ -137,6 +138,8 @@
return container_of(inode, struct v9fs_inode, vfs_inode);
}
+extern int v9fs_show_options(struct seq_file *m, struct dentry *root);
+
struct p9_fid *v9fs_session_init(struct v9fs_session_info *, const char *,
char *);
extern void v9fs_session_close(struct v9fs_session_info *v9ses);
diff --git a/fs/9p/vfs_super.c b/fs/9p/vfs_super.c
index a0965fb..8b75463 100644
--- a/fs/9p/vfs_super.c
+++ b/fs/9p/vfs_super.c
@@ -33,7 +33,6 @@
#include <linux/string.h>
#include <linux/inet.h>
#include <linux/pagemap.h>
-#include <linux/seq_file.h>
#include <linux/mount.h>
#include <linux/idr.h>
#include <linux/sched.h>
@@ -104,7 +103,6 @@
sb->s_flags |= MS_POSIXACL;
#endif
- save_mount_options(sb, data);
return 0;
}
@@ -349,7 +347,7 @@
.destroy_inode = v9fs_destroy_inode,
.statfs = simple_statfs,
.evict_inode = v9fs_evict_inode,
- .show_options = generic_show_options,
+ .show_options = v9fs_show_options,
.umount_begin = v9fs_umount_begin,
.write_inode = v9fs_write_inode,
};
@@ -360,7 +358,7 @@
.statfs = v9fs_statfs,
.drop_inode = v9fs_drop_inode,
.evict_inode = v9fs_evict_inode,
- .show_options = generic_show_options,
+ .show_options = v9fs_show_options,
.umount_begin = v9fs_umount_begin,
.write_inode = v9fs_write_inode_dotl,
};
diff --git a/fs/Kconfig b/fs/Kconfig
index b0e42b6..7aee6d6 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -80,7 +80,6 @@
config FILE_LOCKING
bool "Enable POSIX file locking API" if EXPERT
default y
- select PERCPU_RWSEM
help
This option enables standard file locking support, required
for filesystems like NFS and for the flock() system
diff --git a/fs/affs/super.c b/fs/affs/super.c
index c2c27a8..7bf47a4 100644
--- a/fs/affs/super.c
+++ b/fs/affs/super.c
@@ -20,9 +20,11 @@
#include <linux/slab.h>
#include <linux/writeback.h>
#include <linux/blkdev.h>
+#include <linux/seq_file.h>
#include "affs.h"
static int affs_statfs(struct dentry *dentry, struct kstatfs *buf);
+static int affs_show_options(struct seq_file *m, struct dentry *root);
static int affs_remount (struct super_block *sb, int *flags, char *data);
static void
@@ -159,7 +161,7 @@
.sync_fs = affs_sync_fs,
.statfs = affs_statfs,
.remount_fs = affs_remount,
- .show_options = generic_show_options,
+ .show_options = affs_show_options,
};
enum {
@@ -293,6 +295,40 @@
return 1;
}
+static int affs_show_options(struct seq_file *m, struct dentry *root)
+{
+ struct super_block *sb = root->d_sb;
+ struct affs_sb_info *sbi = AFFS_SB(sb);
+
+ if (sb->s_blocksize)
+ seq_printf(m, ",bs=%lu", sb->s_blocksize);
+ if (affs_test_opt(sbi->s_flags, SF_SETMODE))
+ seq_printf(m, ",mode=%o", sbi->s_mode);
+ if (affs_test_opt(sbi->s_flags, SF_MUFS))
+ seq_puts(m, ",mufs");
+ if (affs_test_opt(sbi->s_flags, SF_NO_TRUNCATE))
+ seq_puts(m, ",nofilenametruncate");
+ if (affs_test_opt(sbi->s_flags, SF_PREFIX))
+ seq_printf(m, ",prefix=%s", sbi->s_prefix);
+ if (affs_test_opt(sbi->s_flags, SF_IMMUTABLE))
+ seq_puts(m, ",protect");
+ if (sbi->s_reserved != 2)
+ seq_printf(m, ",reserved=%u", sbi->s_reserved);
+ if (sbi->s_root_block != (sbi->s_reserved + sbi->s_partition_size - 1) / 2)
+ seq_printf(m, ",root=%u", sbi->s_root_block);
+ if (affs_test_opt(sbi->s_flags, SF_SETGID))
+ seq_printf(m, ",setgid=%u",
+ from_kgid_munged(&init_user_ns, sbi->s_gid));
+ if (affs_test_opt(sbi->s_flags, SF_SETUID))
+ seq_printf(m, ",setuid=%u",
+ from_kuid_munged(&init_user_ns, sbi->s_uid));
+ if (affs_test_opt(sbi->s_flags, SF_VERBOSE))
+ seq_puts(m, ",verbose");
+ if (sbi->s_volume[0])
+ seq_printf(m, ",volume=%s", sbi->s_volume);
+ return 0;
+}
+
/* This function definitely needs to be split up. Some fine day I'll
* hopefully have the guts to do so. Until then: sorry for the mess.
*/
@@ -316,8 +352,6 @@
u8 sig[4];
int ret;
- save_mount_options(sb, data);
-
pr_debug("read_super(%s)\n", data ? (const char *)data : "no options");
sb->s_magic = AFFS_SUPER_MAGIC;
@@ -548,8 +582,6 @@
}
flush_delayed_work(&sbi->sb_work);
- if (new_opts)
- replace_mount_options(sb, new_opts);
sbi->s_flags = mount_flags;
sbi->s_mode = mode;
diff --git a/fs/afs/super.c b/fs/afs/super.c
index 67680c2..689173c 100644
--- a/fs/afs/super.c
+++ b/fs/afs/super.c
@@ -37,6 +37,8 @@
static struct inode *afs_alloc_inode(struct super_block *sb);
static void afs_destroy_inode(struct inode *inode);
static int afs_statfs(struct dentry *dentry, struct kstatfs *buf);
+static int afs_show_devname(struct seq_file *m, struct dentry *root);
+static int afs_show_options(struct seq_file *m, struct dentry *root);
struct file_system_type afs_fs_type = {
.owner = THIS_MODULE,
@@ -53,7 +55,8 @@
.drop_inode = afs_drop_inode,
.destroy_inode = afs_destroy_inode,
.evict_inode = afs_evict_inode,
- .show_options = generic_show_options,
+ .show_devname = afs_show_devname,
+ .show_options = afs_show_options,
};
static struct kmem_cache *afs_inode_cachep;
@@ -136,6 +139,45 @@
}
/*
+ * Display the mount device name in /proc/mounts.
+ */
+static int afs_show_devname(struct seq_file *m, struct dentry *root)
+{
+ struct afs_super_info *as = root->d_sb->s_fs_info;
+ struct afs_volume *volume = as->volume;
+ struct afs_cell *cell = volume->cell;
+ const char *suf = "";
+ char pref = '%';
+
+ switch (volume->type) {
+ case AFSVL_RWVOL:
+ break;
+ case AFSVL_ROVOL:
+ pref = '#';
+ if (volume->type_force)
+ suf = ".readonly";
+ break;
+ case AFSVL_BACKVOL:
+ pref = '#';
+ suf = ".backup";
+ break;
+ }
+
+ seq_printf(m, "%c%s:%s%s", pref, cell->name, volume->vlocation->vldb.name, suf);
+ return 0;
+}
+
+/*
+ * Display the mount options in /proc/mounts.
+ */
+static int afs_show_options(struct seq_file *m, struct dentry *root)
+{
+ if (test_bit(AFS_VNODE_AUTOCELL, &AFS_FS_I(d_inode(root))->flags))
+ seq_puts(m, "autocell");
+ return 0;
+}
+
+/*
* parse the mount options
* - this function has been shamelessly adapted from the ext3 fs which
* shamelessly adapted it from the msdos fs
@@ -427,7 +469,6 @@
deactivate_locked_super(sb);
goto error;
}
- save_mount_options(sb, new_opts);
sb->s_flags |= MS_ACTIVE;
} else {
_debug("reuse");
diff --git a/fs/befs/btree.c b/fs/befs/btree.c
index d509887..1b7e0f7 100644
--- a/fs/befs/btree.c
+++ b/fs/befs/btree.c
@@ -120,18 +120,15 @@
const void *key2, int keylen2);
/**
- * befs_bt_read_super - read in btree superblock convert to cpu byteorder
- * @sb: Filesystem superblock
- * @ds: Datastream to read from
- * @sup: Buffer in which to place the btree superblock
+ * befs_bt_read_super() - read in btree superblock convert to cpu byteorder
+ * @sb: Filesystem superblock
+ * @ds: Datastream to read from
+ * @sup: Buffer in which to place the btree superblock
*
* Calls befs_read_datastream to read in the btree superblock and
* makes sure it is in cpu byteorder, byteswapping if necessary.
- *
- * On success, returns BEFS_OK and *@sup contains the btree superblock,
- * in cpu byte order.
- *
- * On failure, BEFS_ERR is returned.
+ * Return: BEFS_OK on success and if *@sup contains the btree superblock in cpu
+ * byte order. Otherwise return BEFS_ERR on error.
*/
static int
befs_bt_read_super(struct super_block *sb, const befs_data_stream *ds,
diff --git a/fs/befs/linuxvfs.c b/fs/befs/linuxvfs.c
index 63e7c47..4a4a5a3 100644
--- a/fs/befs/linuxvfs.c
+++ b/fs/befs/linuxvfs.c
@@ -20,6 +20,7 @@
#include <linux/sched.h>
#include <linux/cred.h>
#include <linux/exportfs.h>
+#include <linux/seq_file.h>
#include "befs.h"
#include "btree.h"
@@ -53,6 +54,7 @@
static void befs_put_super(struct super_block *);
static int befs_remount(struct super_block *, int *, char *);
static int befs_statfs(struct dentry *, struct kstatfs *);
+static int befs_show_options(struct seq_file *, struct dentry *);
static int parse_options(char *, struct befs_mount_options *);
static struct dentry *befs_fh_to_dentry(struct super_block *sb,
struct fid *fid, int fh_len, int fh_type);
@@ -66,7 +68,7 @@
.put_super = befs_put_super, /* uninit super */
.statfs = befs_statfs, /* statfs */
.remount_fs = befs_remount,
- .show_options = generic_show_options,
+ .show_options = befs_show_options,
};
/* slab cache for befs_inode_info objects */
@@ -771,6 +773,24 @@
return 1;
}
+static int befs_show_options(struct seq_file *m, struct dentry *root)
+{
+ struct befs_sb_info *befs_sb = BEFS_SB(root->d_sb);
+ struct befs_mount_options *opts = &befs_sb->mount_opts;
+
+ if (!uid_eq(opts->uid, GLOBAL_ROOT_UID))
+ seq_printf(m, ",uid=%u",
+ from_kuid_munged(&init_user_ns, opts->uid));
+ if (!gid_eq(opts->gid, GLOBAL_ROOT_GID))
+ seq_printf(m, ",gid=%u",
+ from_kgid_munged(&init_user_ns, opts->gid));
+ if (opts->iocharset)
+ seq_printf(m, ",charset=%s", opts->iocharset);
+ if (opts->debug)
+ seq_puts(m, ",debug");
+ return 0;
+}
+
/* This function has the responsibiltiy of getting the
* filesystem ready for unmounting.
* Basically, we free everything that we allocated in
@@ -804,8 +824,6 @@
const off_t x86_sb_off = 512;
int blocksize;
- save_mount_options(sb, data);
-
sb->s_fs_info = kzalloc(sizeof(*befs_sb), GFP_KERNEL);
if (sb->s_fs_info == NULL)
goto unacquire_none;
diff --git a/fs/bfs/inode.c b/fs/bfs/inode.c
index 25e312c..9a69392 100644
--- a/fs/bfs/inode.c
+++ b/fs/bfs/inode.c
@@ -419,7 +419,7 @@
if (i_sblock > info->si_blocks ||
i_eblock > info->si_blocks ||
i_sblock > i_eblock ||
- i_eoff > s_size ||
+ (i_eoff != le32_to_cpu(-1) && i_eoff > s_size) ||
i_sblock * BFS_BSIZE > i_eoff) {
printf("Inode 0x%08x corrupted\n", i);
diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c
index 2edcefc..a1e6860 100644
--- a/fs/binfmt_flat.c
+++ b/fs/binfmt_flat.c
@@ -422,9 +422,9 @@
{
struct flat_hdr *hdr;
unsigned long textpos, datapos, realdatastart;
- unsigned long text_len, data_len, bss_len, stack_len, full_data, flags;
+ u32 text_len, data_len, bss_len, stack_len, full_data, flags;
unsigned long len, memp, memp_size, extra, rlim;
- unsigned long __user *reloc, *rp;
+ u32 __user *reloc, *rp;
struct inode *inode;
int i, rev, relocs;
loff_t fpos;
@@ -574,7 +574,7 @@
MAX_SHARED_LIBS * sizeof(unsigned long),
FLAT_DATA_ALIGN);
- pr_debug("Allocated data+bss+stack (%ld bytes): %lx\n",
+ pr_debug("Allocated data+bss+stack (%u bytes): %lx\n",
data_len + bss_len + stack_len, datapos);
fpos = ntohl(hdr->data_start);
@@ -596,13 +596,13 @@
goto err;
}
- reloc = (unsigned long __user *)
+ reloc = (u32 __user *)
(datapos + (ntohl(hdr->reloc_start) - text_len));
memp = realdatastart;
memp_size = len;
} else {
- len = text_len + data_len + extra + MAX_SHARED_LIBS * sizeof(unsigned long);
+ len = text_len + data_len + extra + MAX_SHARED_LIBS * sizeof(u32);
len = PAGE_ALIGN(len);
textpos = vm_mmap(NULL, 0, len,
PROT_READ | PROT_EXEC | PROT_WRITE, MAP_PRIVATE, 0);
@@ -618,10 +618,10 @@
realdatastart = textpos + ntohl(hdr->data_start);
datapos = ALIGN(realdatastart +
- MAX_SHARED_LIBS * sizeof(unsigned long),
+ MAX_SHARED_LIBS * sizeof(u32),
FLAT_DATA_ALIGN);
- reloc = (unsigned long __user *)
+ reloc = (u32 __user *)
(datapos + (ntohl(hdr->reloc_start) - text_len));
memp = textpos;
memp_size = len;
@@ -694,7 +694,7 @@
ret = result;
pr_err("Unable to read code+data+bss, errno %d\n", ret);
vm_munmap(textpos, text_len + data_len + extra +
- MAX_SHARED_LIBS * sizeof(unsigned long));
+ MAX_SHARED_LIBS * sizeof(u32));
goto err;
}
}
@@ -754,8 +754,8 @@
* image.
*/
if (flags & FLAT_FLAG_GOTPIC) {
- for (rp = (unsigned long __user *)datapos; ; rp++) {
- unsigned long addr, rp_val;
+ for (rp = (u32 __user *)datapos; ; rp++) {
+ u32 addr, rp_val;
if (get_user(rp_val, rp))
return -EFAULT;
if (rp_val == 0xffffffff)
@@ -784,9 +784,9 @@
* __start to address 4 so that is okay).
*/
if (rev > OLD_FLAT_VERSION) {
- unsigned long __maybe_unused persistent = 0;
+ u32 __maybe_unused persistent = 0;
for (i = 0; i < relocs; i++) {
- unsigned long addr, relval;
+ u32 addr, relval;
/*
* Get the address of the pointer to be
@@ -799,15 +799,18 @@
if (flat_set_persistent(relval, &persistent))
continue;
addr = flat_get_relocate_addr(relval);
- rp = (unsigned long __user *)calc_reloc(addr, libinfo, id, 1);
- if (rp == (unsigned long __user *)RELOC_FAILED) {
+ rp = (u32 __user *)calc_reloc(addr, libinfo, id, 1);
+ if (rp == (u32 __user *)RELOC_FAILED) {
ret = -ENOEXEC;
goto err;
}
/* Get the pointer's value. */
- addr = flat_get_addr_from_rp(rp, relval, flags,
- &persistent);
+ ret = flat_get_addr_from_rp(rp, relval, flags,
+ &addr, &persistent);
+ if (unlikely(ret))
+ goto err;
+
if (addr != 0) {
/*
* Do the relocation. PIC relocs in the data section are
@@ -822,12 +825,14 @@
}
/* Write back the relocated pointer. */
- flat_put_addr_at_rp(rp, addr, relval);
+ ret = flat_put_addr_at_rp(rp, addr, relval);
+ if (unlikely(ret))
+ goto err;
}
}
} else {
for (i = 0; i < relocs; i++) {
- unsigned long relval;
+ u32 relval;
if (get_user(relval, reloc + i))
return -EFAULT;
relval = ntohl(relval);
diff --git a/fs/btrfs/compression.c b/fs/btrfs/compression.c
index 2c0b7b5..d2ef9ac 100644
--- a/fs/btrfs/compression.c
+++ b/fs/btrfs/compression.c
@@ -152,6 +152,7 @@
* we have verified the checksum already, set page
* checked so the end_io handlers know about it
*/
+ ASSERT(!bio_flagged(bio, BIO_CLONED));
bio_for_each_segment_all(bvec, cb->orig_bio, i)
SetPageChecked(bvec->bv_page);
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 086dcba..080e2eb 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -964,6 +964,7 @@
struct btrfs_root *root;
int i, ret = 0;
+ ASSERT(!bio_flagged(bio, BIO_CLONED));
bio_for_each_segment_all(bvec, bio, i) {
root = BTRFS_I(bvec->bv_page->mapping->host)->root;
ret = csum_dirty_buffer(root->fs_info, bvec->bv_page);
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index 375f8c7..e3b0b41 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -4825,10 +4825,6 @@
else
flush = BTRFS_RESERVE_NO_FLUSH;
spin_lock(&space_info->lock);
- if (can_overcommit(fs_info, space_info, orig, flush, false)) {
- spin_unlock(&space_info->lock);
- break;
- }
if (list_empty(&space_info->tickets) &&
list_empty(&space_info->priority_tickets)) {
spin_unlock(&space_info->lock);
@@ -7589,6 +7585,10 @@
u64 offset;
int cached;
+ /* If the block group is read-only, we can skip it entirely. */
+ if (unlikely(block_group->ro))
+ continue;
+
btrfs_grab_block_group(block_group, delalloc);
search_start = block_group->key.objectid;
@@ -7624,8 +7624,6 @@
if (unlikely(block_group->cached == BTRFS_CACHE_ERROR))
goto loop;
- if (unlikely(block_group->ro))
- goto loop;
/*
* Ok we want to try and use the cluster allocator, so
@@ -7839,6 +7837,7 @@
failed_alloc = false;
BUG_ON(index != get_block_group_index(block_group));
btrfs_release_block_group(block_group, delalloc);
+ cond_resched();
}
up_read(&space_info->groups_sem);
diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index 556484c..0aff9b2 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -2258,7 +2258,7 @@
return 0;
}
-int btrfs_check_repairable(struct inode *inode, struct bio *failed_bio,
+bool btrfs_check_repairable(struct inode *inode, struct bio *failed_bio,
struct io_failure_record *failrec, int failed_mirror)
{
struct btrfs_fs_info *fs_info = btrfs_sb(inode->i_sb);
@@ -2274,7 +2274,7 @@
btrfs_debug(fs_info,
"Check Repairable: cannot repair, num_copies=%d, next_mirror %d, failed_mirror %d",
num_copies, failrec->this_mirror, failed_mirror);
- return 0;
+ return false;
}
/*
@@ -2315,10 +2315,10 @@
btrfs_debug(fs_info,
"Check Repairable: (fail) num_copies=%d, next_mirror %d, failed_mirror %d",
num_copies, failrec->this_mirror, failed_mirror);
- return 0;
+ return false;
}
- return 1;
+ return true;
}
@@ -2382,8 +2382,8 @@
if (ret)
return ret;
- ret = btrfs_check_repairable(inode, failed_bio, failrec, failed_mirror);
- if (!ret) {
+ if (!btrfs_check_repairable(inode, failed_bio, failrec,
+ failed_mirror)) {
free_io_failure(failure_tree, tree, failrec);
return -EIO;
}
@@ -2396,10 +2396,6 @@
start - page_offset(page),
(int)phy_offset, failed_bio->bi_end_io,
NULL);
- if (!bio) {
- free_io_failure(failure_tree, tree, failrec);
- return -EIO;
- }
bio_set_op_attrs(bio, REQ_OP_READ, read_mode);
btrfs_debug(btrfs_sb(inode->i_sb),
@@ -2456,6 +2452,7 @@
u64 end;
int i;
+ ASSERT(!bio_flagged(bio, BIO_CLONED));
bio_for_each_segment_all(bvec, bio, i) {
struct page *page = bvec->bv_page;
struct inode *inode = page->mapping->host;
@@ -2526,6 +2523,7 @@
int ret;
int i;
+ ASSERT(!bio_flagged(bio, BIO_CLONED));
bio_for_each_segment_all(bvec, bio, i) {
struct page *page = bvec->bv_page;
struct inode *inode = page->mapping->host;
@@ -3680,6 +3678,7 @@
struct extent_buffer *eb;
int i, done;
+ ASSERT(!bio_flagged(bio, BIO_CLONED));
bio_for_each_segment_all(bvec, bio, i) {
struct page *page = bvec->bv_page;
diff --git a/fs/btrfs/extent_io.h b/fs/btrfs/extent_io.h
index 3fb8513..4f03091 100644
--- a/fs/btrfs/extent_io.h
+++ b/fs/btrfs/extent_io.h
@@ -539,8 +539,8 @@
u64 end);
int btrfs_get_io_failure_record(struct inode *inode, u64 start, u64 end,
struct io_failure_record **failrec_ret);
-int btrfs_check_repairable(struct inode *inode, struct bio *failed_bio,
- struct io_failure_record *failrec, int fail_mirror);
+bool btrfs_check_repairable(struct inode *inode, struct bio *failed_bio,
+ struct io_failure_record *failrec, int fail_mirror);
struct bio *btrfs_create_repair_bio(struct inode *inode, struct bio *failed_bio,
struct io_failure_record *failrec,
struct page *page, int pg_offset, int icsum,
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 06dea7c..95c2120 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -8016,10 +8016,6 @@
isector >>= inode->i_sb->s_blocksize_bits;
bio = btrfs_create_repair_bio(inode, failed_bio, failrec, page,
pgoff, isector, repair_endio, repair_arg);
- if (!bio) {
- free_io_failure(failure_tree, io_tree, failrec);
- return -EIO;
- }
bio_set_op_attrs(bio, REQ_OP_READ, read_mode);
btrfs_debug(BTRFS_I(inode)->root->fs_info,
@@ -8059,6 +8055,7 @@
ASSERT(bio->bi_io_vec->bv_len == btrfs_inode_sectorsize(inode));
done->uptodate = 1;
+ ASSERT(!bio_flagged(bio, BIO_CLONED));
bio_for_each_segment_all(bvec, bio, i)
clean_io_failure(BTRFS_I(inode)->root->fs_info, failure_tree,
io_tree, done->start, bvec->bv_page,
@@ -8150,6 +8147,7 @@
io_tree = &BTRFS_I(inode)->io_tree;
failure_tree = &BTRFS_I(inode)->io_failure_tree;
+ ASSERT(!bio_flagged(bio, BIO_CLONED));
bio_for_each_segment_all(bvec, bio, i) {
ret = __readpage_endio_check(inode, io_bio, i, bvec->bv_page,
bvec->bv_offset, done->start,
diff --git a/fs/btrfs/raid56.c b/fs/btrfs/raid56.c
index 6f845d2..2086383 100644
--- a/fs/btrfs/raid56.c
+++ b/fs/btrfs/raid56.c
@@ -1136,20 +1136,27 @@
static void index_rbio_pages(struct btrfs_raid_bio *rbio)
{
struct bio *bio;
- struct bio_vec *bvec;
u64 start;
unsigned long stripe_offset;
unsigned long page_index;
- int i;
spin_lock_irq(&rbio->bio_list_lock);
bio_list_for_each(bio, &rbio->bio_list) {
+ struct bio_vec bvec;
+ struct bvec_iter iter;
+ int i = 0;
+
start = (u64)bio->bi_iter.bi_sector << 9;
stripe_offset = start - rbio->bbio->raid_map[0];
page_index = stripe_offset >> PAGE_SHIFT;
- bio_for_each_segment_all(bvec, bio, i)
- rbio->bio_pages[page_index + i] = bvec->bv_page;
+ if (bio_flagged(bio, BIO_CLONED))
+ bio->bi_iter = btrfs_io_bio(bio)->iter;
+
+ bio_for_each_segment(bvec, bio, iter) {
+ rbio->bio_pages[page_index + i] = bvec.bv_page;
+ i++;
+ }
}
spin_unlock_irq(&rbio->bio_list_lock);
}
@@ -1423,11 +1430,14 @@
*/
static void set_bio_pages_uptodate(struct bio *bio)
{
- struct bio_vec *bvec;
- int i;
+ struct bio_vec bvec;
+ struct bvec_iter iter;
- bio_for_each_segment_all(bvec, bio, i)
- SetPageUptodate(bvec->bv_page);
+ if (bio_flagged(bio, BIO_CLONED))
+ bio->bi_iter = btrfs_io_bio(bio)->iter;
+
+ bio_for_each_segment(bvec, bio, iter)
+ SetPageUptodate(bvec.bv_page);
}
/*
diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c
index e937c10..b082210 100644
--- a/fs/btrfs/send.c
+++ b/fs/btrfs/send.c
@@ -1856,7 +1856,7 @@
*/
static int will_overwrite_ref(struct send_ctx *sctx, u64 dir, u64 dir_gen,
const char *name, int name_len,
- u64 *who_ino, u64 *who_gen)
+ u64 *who_ino, u64 *who_gen, u64 *who_mode)
{
int ret = 0;
u64 gen;
@@ -1905,7 +1905,7 @@
if (other_inode > sctx->send_progress ||
is_waiting_for_move(sctx, other_inode)) {
ret = get_inode_info(sctx->parent_root, other_inode, NULL,
- who_gen, NULL, NULL, NULL, NULL);
+ who_gen, who_mode, NULL, NULL, NULL);
if (ret < 0)
goto out;
@@ -3683,6 +3683,36 @@
return ret;
}
+static int update_ref_path(struct send_ctx *sctx, struct recorded_ref *ref)
+{
+ int ret;
+ struct fs_path *new_path;
+
+ /*
+ * Our reference's name member points to its full_path member string, so
+ * we use here a new path.
+ */
+ new_path = fs_path_alloc();
+ if (!new_path)
+ return -ENOMEM;
+
+ ret = get_cur_path(sctx, ref->dir, ref->dir_gen, new_path);
+ if (ret < 0) {
+ fs_path_free(new_path);
+ return ret;
+ }
+ ret = fs_path_add(new_path, ref->name, ref->name_len);
+ if (ret < 0) {
+ fs_path_free(new_path);
+ return ret;
+ }
+
+ fs_path_free(ref->full_path);
+ set_ref_path(ref, new_path);
+
+ return 0;
+}
+
/*
* This does all the move/link/unlink/rmdir magic.
*/
@@ -3696,10 +3726,12 @@
struct fs_path *valid_path = NULL;
u64 ow_inode = 0;
u64 ow_gen;
+ u64 ow_mode;
int did_overwrite = 0;
int is_orphan = 0;
u64 last_dir_ino_rm = 0;
bool can_rename = true;
+ bool orphanized_dir = false;
bool orphanized_ancestor = false;
btrfs_debug(fs_info, "process_recorded_refs %llu", sctx->cur_ino);
@@ -3798,7 +3830,7 @@
*/
ret = will_overwrite_ref(sctx, cur->dir, cur->dir_gen,
cur->name, cur->name_len,
- &ow_inode, &ow_gen);
+ &ow_inode, &ow_gen, &ow_mode);
if (ret < 0)
goto out;
if (ret) {
@@ -3815,6 +3847,8 @@
cur->full_path);
if (ret < 0)
goto out;
+ if (S_ISDIR(ow_mode))
+ orphanized_dir = true;
/*
* If ow_inode has its rename operation delayed
@@ -3920,6 +3954,18 @@
if (ret < 0)
goto out;
} else {
+ /*
+ * We might have previously orphanized an inode
+ * which is an ancestor of our current inode,
+ * so our reference's full path, which was
+ * computed before any such orphanizations, must
+ * be updated.
+ */
+ if (orphanized_dir) {
+ ret = update_ref_path(sctx, cur);
+ if (ret < 0)
+ goto out;
+ }
ret = send_link(sctx, cur->full_path,
valid_path);
if (ret < 0)
@@ -3990,34 +4036,9 @@
* ancestor inode.
*/
if (orphanized_ancestor) {
- struct fs_path *new_path;
-
- /*
- * Our reference's name member points to
- * its full_path member string, so we
- * use here a new path.
- */
- new_path = fs_path_alloc();
- if (!new_path) {
- ret = -ENOMEM;
+ ret = update_ref_path(sctx, cur);
+ if (ret < 0)
goto out;
- }
- ret = get_cur_path(sctx, cur->dir,
- cur->dir_gen,
- new_path);
- if (ret < 0) {
- fs_path_free(new_path);
- goto out;
- }
- ret = fs_path_add(new_path,
- cur->name,
- cur->name_len);
- if (ret < 0) {
- fs_path_free(new_path);
- goto out;
- }
- fs_path_free(cur->full_path);
- set_ref_path(cur, new_path);
}
ret = send_unlink(sctx, cur->full_path);
if (ret < 0)
@@ -5249,15 +5270,12 @@
goto out;
}
- right_disknr = btrfs_file_extent_disk_bytenr(eb, ei);
if (right_type == BTRFS_FILE_EXTENT_INLINE) {
right_len = btrfs_file_extent_inline_len(eb, slot, ei);
right_len = PAGE_ALIGN(right_len);
} else {
right_len = btrfs_file_extent_num_bytes(eb, ei);
}
- right_offset = btrfs_file_extent_offset(eb, ei);
- right_gen = btrfs_file_extent_generation(eb, ei);
/*
* Are we at extent 8? If yes, we know the extent is changed.
@@ -5282,6 +5300,10 @@
goto out;
}
+ right_disknr = btrfs_file_extent_disk_bytenr(eb, ei);
+ right_offset = btrfs_file_extent_offset(eb, ei);
+ right_gen = btrfs_file_extent_generation(eb, ei);
+
left_offset_fixed = left_offset;
if (key.offset < ekey->offset) {
/* Fix the right offset for 2a and 7. */
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index 74e4779..12540b6 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -1154,7 +1154,6 @@
goto fail_close;
}
- save_mount_options(sb, data);
cleancache_init_fs(sb);
sb->s_flags |= MS_ACTIVE;
return 0;
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index f20ef21..3a11ae6 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -2153,8 +2153,7 @@
u32 this_len = sizeof(*di) + name_len + data_len;
char *name;
- ret = verify_dir_item(fs_info, path->nodes[0],
- path->slots[0], di);
+ ret = verify_dir_item(fs_info, path->nodes[0], i, di);
if (ret) {
ret = -EIO;
goto out;
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index 5eb7217..e8b9a26 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -2702,7 +2702,7 @@
mutex_lock(&fs_info->chunk_mutex);
old_total = btrfs_super_total_bytes(super_copy);
- diff = new_size - device->total_bytes;
+ diff = round_down(new_size - device->total_bytes, fs_info->sectorsize);
if (new_size <= device->total_bytes ||
device->is_tgtdev_for_dev_replace) {
@@ -4406,7 +4406,7 @@
u64 diff;
new_size = round_down(new_size, fs_info->sectorsize);
- diff = old_size - new_size;
+ diff = round_down(old_size - new_size, fs_info->sectorsize);
if (device->is_tgtdev_for_dev_replace)
return -EINVAL;
diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c
index e071d23..ef7240a 100644
--- a/fs/ceph/dir.c
+++ b/fs/ceph/dir.c
@@ -271,6 +271,11 @@
if (ret < 0)
err = ret;
dput(last);
+ /* last_name no longer match cache index */
+ if (fi->readdir_cache_idx >= 0) {
+ fi->readdir_cache_idx = -1;
+ fi->dir_release_count = 0;
+ }
}
return err;
}
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 556f480..180b335 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -1354,7 +1354,7 @@
spin_lock_init(&cifs_tcp_ses_lock);
spin_lock_init(&GlobalMid_Lock);
- get_random_bytes(&cifs_lock_secret, sizeof(cifs_lock_secret));
+ cifs_lock_secret = get_random_u32();
if (cifs_max_pending < 2) {
cifs_max_pending = 2;
diff --git a/fs/dcache.c b/fs/dcache.c
index 6c30be6..f901413 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -90,6 +90,11 @@
static struct kmem_cache *dentry_cache __read_mostly;
+const struct qstr empty_name = QSTR_INIT("", 0);
+EXPORT_SYMBOL(empty_name);
+const struct qstr slash_name = QSTR_INIT("/", 1);
+EXPORT_SYMBOL(slash_name);
+
/*
* This is the single most critical data structure when it comes
* to the dcache: the hashtable for lookups. Somebody should try
@@ -1606,8 +1611,7 @@
*/
dentry->d_iname[DNAME_INLINE_LEN-1] = 0;
if (unlikely(!name)) {
- static const struct qstr anon = QSTR_INIT("/", 1);
- name = &anon;
+ name = &slash_name;
dname = dentry->d_iname;
} else if (name->len > DNAME_INLINE_LEN-1) {
size_t size = offsetof(struct external_name, name[1]);
diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c
index a0e4e2f..c59f015 100644
--- a/fs/debugfs/inode.c
+++ b/fs/debugfs/inode.c
@@ -203,8 +203,6 @@
struct debugfs_fs_info *fsi;
int err;
- save_mount_options(sb, data);
-
fsi = kzalloc(sizeof(struct debugfs_fs_info), GFP_KERNEL);
sb->s_fs_info = fsi;
if (!fsi) {
diff --git a/fs/efivarfs/super.c b/fs/efivarfs/super.c
index d7a7c53..5b68e42 100644
--- a/fs/efivarfs/super.c
+++ b/fs/efivarfs/super.c
@@ -29,7 +29,6 @@
.statfs = simple_statfs,
.drop_inode = generic_delete_inode,
.evict_inode = efivarfs_evict_inode,
- .show_options = generic_show_options,
};
static struct super_block *efivarfs_sb;
diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index a6d19483..e767e43 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -960,10 +960,14 @@
mutex_lock(&ep->mtx);
for (rbp = rb_first(&ep->rbr); rbp; rbp = rb_next(rbp)) {
struct epitem *epi = rb_entry(rbp, struct epitem, rbn);
+ struct inode *inode = file_inode(epi->ffd.file);
- seq_printf(m, "tfd: %8d events: %8x data: %16llx\n",
+ seq_printf(m, "tfd: %8d events: %8x data: %16llx "
+ " pos:%lli ino:%lx sdev:%x\n",
epi->ffd.fd, epi->event.events,
- (long long)epi->event.data);
+ (long long)epi->event.data,
+ (long long)epi->ffd.file->f_pos,
+ inode->i_ino, inode->i_sb->s_dev);
if (seq_has_overflowed(m))
break;
}
@@ -1073,6 +1077,50 @@
return epir;
}
+#ifdef CONFIG_CHECKPOINT_RESTORE
+static struct epitem *ep_find_tfd(struct eventpoll *ep, int tfd, unsigned long toff)
+{
+ struct rb_node *rbp;
+ struct epitem *epi;
+
+ for (rbp = rb_first(&ep->rbr); rbp; rbp = rb_next(rbp)) {
+ epi = rb_entry(rbp, struct epitem, rbn);
+ if (epi->ffd.fd == tfd) {
+ if (toff == 0)
+ return epi;
+ else
+ toff--;
+ }
+ cond_resched();
+ }
+
+ return NULL;
+}
+
+struct file *get_epoll_tfile_raw_ptr(struct file *file, int tfd,
+ unsigned long toff)
+{
+ struct file *file_raw;
+ struct eventpoll *ep;
+ struct epitem *epi;
+
+ if (!is_file_epoll(file))
+ return ERR_PTR(-EINVAL);
+
+ ep = file->private_data;
+
+ mutex_lock(&ep->mtx);
+ epi = ep_find_tfd(ep, tfd, toff);
+ if (epi)
+ file_raw = epi->ffd.file;
+ else
+ file_raw = ERR_PTR(-ENOENT);
+ mutex_unlock(&ep->mtx);
+
+ return file_raw;
+}
+#endif /* CONFIG_CHECKPOINT_RESTORE */
+
/*
* This is the callback that is passed to the wait queue wakeup
* mechanism. It is called by the stored file descriptors when they
diff --git a/fs/ext2/acl.c b/fs/ext2/acl.c
index 79dafa7..51f0aea 100644
--- a/fs/ext2/acl.c
+++ b/fs/ext2/acl.c
@@ -175,11 +175,8 @@
return acl;
}
-/*
- * inode->i_mutex: down
- */
-int
-ext2_set_acl(struct inode *inode, struct posix_acl *acl, int type)
+static int
+__ext2_set_acl(struct inode *inode, struct posix_acl *acl, int type)
{
int name_index;
void *value = NULL;
@@ -189,13 +186,6 @@
switch(type) {
case ACL_TYPE_ACCESS:
name_index = EXT2_XATTR_INDEX_POSIX_ACL_ACCESS;
- if (acl) {
- error = posix_acl_update_mode(inode, &inode->i_mode, &acl);
- if (error)
- return error;
- inode->i_ctime = current_time(inode);
- mark_inode_dirty(inode);
- }
break;
case ACL_TYPE_DEFAULT:
@@ -222,6 +212,31 @@
}
/*
+ * inode->i_mutex: down
+ */
+int
+ext2_set_acl(struct inode *inode, struct posix_acl *acl, int type)
+{
+ int error;
+ int update_mode = 0;
+ umode_t mode = inode->i_mode;
+
+ if (type == ACL_TYPE_ACCESS && acl) {
+ error = posix_acl_update_mode(inode, &mode, &acl);
+ if (error)
+ return error;
+ update_mode = 1;
+ }
+ error = __ext2_set_acl(inode, acl, type);
+ if (!error && update_mode) {
+ inode->i_mode = mode;
+ inode->i_ctime = current_time(inode);
+ mark_inode_dirty(inode);
+ }
+ return error;
+}
+
+/*
* Initialize the ACLs of a new inode. Called from ext2_new_inode.
*
* dir->i_mutex: down
@@ -238,12 +253,12 @@
return error;
if (default_acl) {
- error = ext2_set_acl(inode, default_acl, ACL_TYPE_DEFAULT);
+ error = __ext2_set_acl(inode, default_acl, ACL_TYPE_DEFAULT);
posix_acl_release(default_acl);
}
if (acl) {
if (!error)
- error = ext2_set_acl(inode, acl, ACL_TYPE_ACCESS);
+ error = __ext2_set_acl(inode, acl, ACL_TYPE_ACCESS);
posix_acl_release(acl);
}
return error;
diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
index 2dcbd56..30163d0 100644
--- a/fs/ext2/inode.c
+++ b/fs/ext2/inode.c
@@ -659,6 +659,7 @@
*/
err = -EAGAIN;
count = 0;
+ partial = chain + depth - 1;
break;
}
blk = le32_to_cpu(*(chain[depth-1].p + count));
diff --git a/fs/ext4/acl.c b/fs/ext4/acl.c
index 09441ae..46ff222 100644
--- a/fs/ext4/acl.c
+++ b/fs/ext4/acl.c
@@ -193,13 +193,6 @@
switch (type) {
case ACL_TYPE_ACCESS:
name_index = EXT4_XATTR_INDEX_POSIX_ACL_ACCESS;
- if (acl) {
- error = posix_acl_update_mode(inode, &inode->i_mode, &acl);
- if (error)
- return error;
- inode->i_ctime = current_time(inode);
- ext4_mark_inode_dirty(handle, inode);
- }
break;
case ACL_TYPE_DEFAULT:
@@ -221,8 +214,9 @@
value, size, xattr_flags);
kfree(value);
- if (!error)
+ if (!error) {
set_cached_acl(inode, type, acl);
+ }
return error;
}
@@ -233,6 +227,8 @@
handle_t *handle;
int error, credits, retries = 0;
size_t acl_size = acl ? ext4_acl_size(acl->a_count) : 0;
+ umode_t mode = inode->i_mode;
+ int update_mode = 0;
error = dquot_initialize(inode);
if (error)
@@ -247,7 +243,20 @@
if (IS_ERR(handle))
return PTR_ERR(handle);
+ if ((type == ACL_TYPE_ACCESS) && acl) {
+ error = posix_acl_update_mode(inode, &mode, &acl);
+ if (error)
+ goto out_stop;
+ update_mode = 1;
+ }
+
error = __ext4_set_acl(handle, inode, type, acl, 0 /* xattr_flags */);
+ if (!error && update_mode) {
+ inode->i_mode = mode;
+ inode->i_ctime = current_time(inode);
+ ext4_mark_inode_dirty(handle, inode);
+ }
+out_stop:
ext4_journal_stop(handle);
if (error == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries))
goto retry;
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index 9ebde0c..a2bb7d2 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -961,7 +961,7 @@
/*
* i_block_group is the number of the block group which contains
* this file's inode. Constant across the lifetime of the inode,
- * it is ued for making block allocation decisions - we try to
+ * it is used for making block allocation decisions - we try to
* place a file's data blocks near its inode block, and new inodes
* near to their parent directory's inode.
*/
@@ -1049,10 +1049,8 @@
ext4_group_t i_last_alloc_group;
/* allocation reservation info for delalloc */
- /* In case of bigalloc, these refer to clusters rather than blocks */
+ /* In case of bigalloc, this refer to clusters rather than blocks */
unsigned int i_reserved_data_blocks;
- unsigned int i_reserved_meta_blocks;
- unsigned int i_allocated_meta_blocks;
ext4_lblk_t i_da_metadata_calc_last_lblock;
int i_da_metadata_calc_len;
@@ -2022,7 +2020,8 @@
#define is_dx(dir) (ext4_has_feature_dir_index((dir)->i_sb) && \
ext4_test_inode_flag((dir), EXT4_INODE_INDEX))
-#define EXT4_DIR_LINK_MAX(dir) (!is_dx(dir) && (dir)->i_nlink >= EXT4_LINK_MAX)
+#define EXT4_DIR_LINK_MAX(dir) unlikely((dir)->i_nlink >= EXT4_LINK_MAX && \
+ !(ext4_has_feature_dir_nlink((dir)->i_sb) && is_dx(dir)))
#define EXT4_DIR_LINK_EMPTY(dir) ((dir)->i_nlink == 2 || (dir)->i_nlink == 1)
/* Legal values for the dx_root hash_version field: */
@@ -2462,6 +2461,8 @@
int ext4_inode_is_fast_symlink(struct inode *inode);
struct buffer_head *ext4_getblk(handle_t *, struct inode *, ext4_lblk_t, int);
struct buffer_head *ext4_bread(handle_t *, struct inode *, ext4_lblk_t, int);
+int ext4_bread_batch(struct inode *inode, ext4_lblk_t block, int bh_count,
+ bool wait, struct buffer_head **bhs);
int ext4_get_block_unwritten(struct inode *inode, sector_t iblock,
struct buffer_head *bh_result, int create);
int ext4_get_block(struct inode *inode, sector_t iblock,
@@ -3074,7 +3075,7 @@
struct inode *inode,
struct buffer_head *bh);
#define S_SHIFT 12
-static const unsigned char ext4_type_by_mode[S_IFMT >> S_SHIFT] = {
+static const unsigned char ext4_type_by_mode[(S_IFMT >> S_SHIFT) + 1] = {
[S_IFREG >> S_SHIFT] = EXT4_FT_REG_FILE,
[S_IFDIR >> S_SHIFT] = EXT4_FT_DIR,
[S_IFCHR >> S_SHIFT] = EXT4_FT_CHRDEV,
diff --git a/fs/ext4/ext4_jbd2.h b/fs/ext4/ext4_jbd2.h
index dabad1b..48143e3 100644
--- a/fs/ext4/ext4_jbd2.h
+++ b/fs/ext4/ext4_jbd2.h
@@ -227,6 +227,9 @@
int ext4_mark_inode_dirty(handle_t *handle, struct inode *inode);
+int ext4_expand_extra_isize(struct inode *inode,
+ unsigned int new_extra_isize,
+ struct ext4_iloc *iloc);
/*
* Wrapper functions with which ext4 calls into JBD.
*/
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index e0a8425..97f0fd0 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -4652,7 +4652,7 @@
static int ext4_alloc_file_blocks(struct file *file, ext4_lblk_t offset,
ext4_lblk_t len, loff_t new_size,
- int flags, int mode)
+ int flags)
{
struct inode *inode = file_inode(file);
handle_t *handle;
@@ -4815,7 +4815,7 @@
round_down(offset, 1 << blkbits) >> blkbits,
(round_up((offset + len), 1 << blkbits) -
round_down(offset, 1 << blkbits)) >> blkbits,
- new_size, flags, mode);
+ new_size, flags);
if (ret)
goto out_dio;
@@ -4841,7 +4841,7 @@
inode->i_mtime = inode->i_ctime = current_time(inode);
ret = ext4_alloc_file_blocks(file, lblk, max_blocks, new_size,
- flags, mode);
+ flags);
up_write(&EXT4_I(inode)->i_mmap_sem);
if (ret)
goto out_dio;
@@ -4976,8 +4976,7 @@
ext4_inode_block_unlocked_dio(inode);
inode_dio_wait(inode);
- ret = ext4_alloc_file_blocks(file, lblk, max_blocks, new_size,
- flags, mode);
+ ret = ext4_alloc_file_blocks(file, lblk, max_blocks, new_size, flags);
ext4_inode_resume_unlocked_dio(inode);
if (ret)
goto out;
@@ -5837,7 +5836,7 @@
if (e1_blk > lblk1)
next1 = e1_blk;
if (e2_blk > lblk2)
- next2 = e1_blk;
+ next2 = e2_blk;
/* Do we have something to swap */
if (next1 == EXT_MAX_BLOCKS || next2 == EXT_MAX_BLOCKS)
goto finish;
diff --git a/fs/ext4/file.c b/fs/ext4/file.c
index 58294c9..0d7cf0c 100644
--- a/fs/ext4/file.c
+++ b/fs/ext4/file.c
@@ -537,6 +537,8 @@
lastoff = page_offset(page);
bh = head = page_buffers(page);
do {
+ if (lastoff + bh->b_size <= startoff)
+ goto next;
if (buffer_uptodate(bh) ||
buffer_unwritten(bh)) {
if (whence == SEEK_DATA)
@@ -551,6 +553,7 @@
unlock_page(page);
goto out;
}
+next:
lastoff += bh->b_size;
bh = bh->b_this_page;
} while (bh != head);
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 3c600f0..c774bdc 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -892,7 +892,7 @@
/*
* Get block function for non-AIO DIO writes when we create unwritten extent if
* blocks are not allocated yet. The extent will be converted to written
- * after IO is complete from ext4_ext_direct_IO() function.
+ * after IO is complete by ext4_direct_IO_write().
*/
static int ext4_dio_get_block_unwritten_sync(struct inode *inode,
sector_t iblock, struct buffer_head *bh_result, int create)
@@ -907,7 +907,7 @@
/*
* Mark inode as having pending DIO writes to unwritten extents.
- * ext4_ext_direct_IO() checks this flag and converts extents to
+ * ext4_direct_IO_write() checks this flag and converts extents to
* written.
*/
if (!ret && buffer_unwritten(bh_result))
@@ -1015,6 +1015,50 @@
return ERR_PTR(-EIO);
}
+/* Read a contiguous batch of blocks. */
+int ext4_bread_batch(struct inode *inode, ext4_lblk_t block, int bh_count,
+ bool wait, struct buffer_head **bhs)
+{
+ int i, err;
+
+ for (i = 0; i < bh_count; i++) {
+ bhs[i] = ext4_getblk(NULL, inode, block + i, 0 /* map_flags */);
+ if (IS_ERR(bhs[i])) {
+ err = PTR_ERR(bhs[i]);
+ bh_count = i;
+ goto out_brelse;
+ }
+ }
+
+ for (i = 0; i < bh_count; i++)
+ /* Note that NULL bhs[i] is valid because of holes. */
+ if (bhs[i] && !buffer_uptodate(bhs[i]))
+ ll_rw_block(REQ_OP_READ, REQ_META | REQ_PRIO, 1,
+ &bhs[i]);
+
+ if (!wait)
+ return 0;
+
+ for (i = 0; i < bh_count; i++)
+ if (bhs[i])
+ wait_on_buffer(bhs[i]);
+
+ for (i = 0; i < bh_count; i++) {
+ if (bhs[i] && !buffer_uptodate(bhs[i])) {
+ err = -EIO;
+ goto out_brelse;
+ }
+ }
+ return 0;
+
+out_brelse:
+ for (i = 0; i < bh_count; i++) {
+ brelse(bhs[i]);
+ bhs[i] = NULL;
+ }
+ return err;
+}
+
int ext4_walk_page_buffers(handle_t *handle,
struct buffer_head *head,
unsigned from,
@@ -5658,22 +5702,16 @@
return err;
}
-/*
- * Expand an inode by new_extra_isize bytes.
- * Returns 0 on success or negative error number on failure.
- */
-static int ext4_expand_extra_isize(struct inode *inode,
- unsigned int new_extra_isize,
- struct ext4_iloc iloc,
- handle_t *handle)
+static int __ext4_expand_extra_isize(struct inode *inode,
+ unsigned int new_extra_isize,
+ struct ext4_iloc *iloc,
+ handle_t *handle, int *no_expand)
{
struct ext4_inode *raw_inode;
struct ext4_xattr_ibody_header *header;
+ int error;
- if (EXT4_I(inode)->i_extra_isize >= new_extra_isize)
- return 0;
-
- raw_inode = ext4_raw_inode(&iloc);
+ raw_inode = ext4_raw_inode(iloc);
header = IHDR(inode, raw_inode);
@@ -5688,8 +5726,98 @@
}
/* try to expand with EAs present */
- return ext4_expand_extra_isize_ea(inode, new_extra_isize,
- raw_inode, handle);
+ error = ext4_expand_extra_isize_ea(inode, new_extra_isize,
+ raw_inode, handle);
+ if (error) {
+ /*
+ * Inode size expansion failed; don't try again
+ */
+ *no_expand = 1;
+ }
+
+ return error;
+}
+
+/*
+ * Expand an inode by new_extra_isize bytes.
+ * Returns 0 on success or negative error number on failure.
+ */
+static int ext4_try_to_expand_extra_isize(struct inode *inode,
+ unsigned int new_extra_isize,
+ struct ext4_iloc iloc,
+ handle_t *handle)
+{
+ int no_expand;
+ int error;
+
+ if (ext4_test_inode_state(inode, EXT4_STATE_NO_EXPAND))
+ return -EOVERFLOW;
+
+ /*
+ * In nojournal mode, we can immediately attempt to expand
+ * the inode. When journaled, we first need to obtain extra
+ * buffer credits since we may write into the EA block
+ * with this same handle. If journal_extend fails, then it will
+ * only result in a minor loss of functionality for that inode.
+ * If this is felt to be critical, then e2fsck should be run to
+ * force a large enough s_min_extra_isize.
+ */
+ if (ext4_handle_valid(handle) &&
+ jbd2_journal_extend(handle,
+ EXT4_DATA_TRANS_BLOCKS(inode->i_sb)) != 0)
+ return -ENOSPC;
+
+ if (ext4_write_trylock_xattr(inode, &no_expand) == 0)
+ return -EBUSY;
+
+ error = __ext4_expand_extra_isize(inode, new_extra_isize, &iloc,
+ handle, &no_expand);
+ ext4_write_unlock_xattr(inode, &no_expand);
+
+ return error;
+}
+
+int ext4_expand_extra_isize(struct inode *inode,
+ unsigned int new_extra_isize,
+ struct ext4_iloc *iloc)
+{
+ handle_t *handle;
+ int no_expand;
+ int error, rc;
+
+ if (ext4_test_inode_state(inode, EXT4_STATE_NO_EXPAND)) {
+ brelse(iloc->bh);
+ return -EOVERFLOW;
+ }
+
+ handle = ext4_journal_start(inode, EXT4_HT_INODE,
+ EXT4_DATA_TRANS_BLOCKS(inode->i_sb));
+ if (IS_ERR(handle)) {
+ error = PTR_ERR(handle);
+ brelse(iloc->bh);
+ return error;
+ }
+
+ ext4_write_lock_xattr(inode, &no_expand);
+
+ BUFFER_TRACE(iloc.bh, "get_write_access");
+ error = ext4_journal_get_write_access(handle, iloc->bh);
+ if (error) {
+ brelse(iloc->bh);
+ goto out_stop;
+ }
+
+ error = __ext4_expand_extra_isize(inode, new_extra_isize, iloc,
+ handle, &no_expand);
+
+ rc = ext4_mark_iloc_dirty(handle, inode, iloc);
+ if (!error)
+ error = rc;
+
+ ext4_write_unlock_xattr(inode, &no_expand);
+out_stop:
+ ext4_journal_stop(handle);
+ return error;
}
/*
@@ -5709,44 +5837,18 @@
{
struct ext4_iloc iloc;
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
- static unsigned int mnt_count;
- int err, ret;
+ int err;
might_sleep();
trace_ext4_mark_inode_dirty(inode, _RET_IP_);
err = ext4_reserve_inode_write(handle, inode, &iloc);
if (err)
return err;
- if (EXT4_I(inode)->i_extra_isize < sbi->s_want_extra_isize &&
- !ext4_test_inode_state(inode, EXT4_STATE_NO_EXPAND)) {
- /*
- * In nojournal mode, we can immediately attempt to expand
- * the inode. When journaled, we first need to obtain extra
- * buffer credits since we may write into the EA block
- * with this same handle. If journal_extend fails, then it will
- * only result in a minor loss of functionality for that inode.
- * If this is felt to be critical, then e2fsck should be run to
- * force a large enough s_min_extra_isize.
- */
- if (!ext4_handle_valid(handle) ||
- jbd2_journal_extend(handle,
- EXT4_DATA_TRANS_BLOCKS(inode->i_sb)) == 0) {
- ret = ext4_expand_extra_isize(inode,
- sbi->s_want_extra_isize,
- iloc, handle);
- if (ret) {
- if (mnt_count !=
- le16_to_cpu(sbi->s_es->s_mnt_count)) {
- ext4_warning(inode->i_sb,
- "Unable to expand inode %lu. Delete"
- " some EAs or run e2fsck.",
- inode->i_ino);
- mnt_count =
- le16_to_cpu(sbi->s_es->s_mnt_count);
- }
- }
- }
- }
+
+ if (EXT4_I(inode)->i_extra_isize < sbi->s_want_extra_isize)
+ ext4_try_to_expand_extra_isize(inode, sbi->s_want_extra_isize,
+ iloc, handle);
+
return ext4_mark_iloc_dirty(handle, inode, &iloc);
}
diff --git a/fs/ext4/ioctl.c b/fs/ext4/ioctl.c
index 42b3a73..afb66d4 100644
--- a/fs/ext4/ioctl.c
+++ b/fs/ext4/ioctl.c
@@ -64,18 +64,16 @@
ei1 = EXT4_I(inode1);
ei2 = EXT4_I(inode2);
- memswap(&inode1->i_flags, &inode2->i_flags, sizeof(inode1->i_flags));
- memswap(&inode1->i_version, &inode2->i_version,
- sizeof(inode1->i_version));
- memswap(&inode1->i_blocks, &inode2->i_blocks,
- sizeof(inode1->i_blocks));
- memswap(&inode1->i_bytes, &inode2->i_bytes, sizeof(inode1->i_bytes));
- memswap(&inode1->i_atime, &inode2->i_atime, sizeof(inode1->i_atime));
- memswap(&inode1->i_mtime, &inode2->i_mtime, sizeof(inode1->i_mtime));
+ swap(inode1->i_flags, inode2->i_flags);
+ swap(inode1->i_version, inode2->i_version);
+ swap(inode1->i_blocks, inode2->i_blocks);
+ swap(inode1->i_bytes, inode2->i_bytes);
+ swap(inode1->i_atime, inode2->i_atime);
+ swap(inode1->i_mtime, inode2->i_mtime);
memswap(ei1->i_data, ei2->i_data, sizeof(ei1->i_data));
- memswap(&ei1->i_flags, &ei2->i_flags, sizeof(ei1->i_flags));
- memswap(&ei1->i_disksize, &ei2->i_disksize, sizeof(ei1->i_disksize));
+ swap(ei1->i_flags, ei2->i_flags);
+ swap(ei1->i_disksize, ei2->i_disksize);
ext4_es_remove_extent(inode1, 0, EXT_MAX_BLOCKS);
ext4_es_remove_extent(inode2, 0, EXT_MAX_BLOCKS);
@@ -351,11 +349,14 @@
raw_inode = ext4_raw_inode(&iloc);
if (!EXT4_FITS_IN_INODE(raw_inode, ei, i_projid)) {
- err = -EOVERFLOW;
+ err = ext4_expand_extra_isize(inode,
+ EXT4_SB(sb)->s_want_extra_isize,
+ &iloc);
+ if (err)
+ goto out_unlock;
+ } else {
brelse(iloc.bh);
- goto out_unlock;
}
- brelse(iloc.bh);
dquot_initialize(inode);
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 581e357..5a10526 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -2295,9 +2295,12 @@
int err, buddy_loaded = 0;
struct ext4_buddy e4b;
struct ext4_group_info *grinfo;
+ unsigned char blocksize_bits = min_t(unsigned char,
+ sb->s_blocksize_bits,
+ EXT4_MAX_BLOCK_LOG_SIZE);
struct sg {
struct ext4_group_info info;
- ext4_grpblk_t counters[EXT4_MAX_BLOCK_LOG_SIZE + 2];
+ ext4_grpblk_t counters[blocksize_bits + 2];
} sg;
group--;
@@ -2306,8 +2309,6 @@
" 2^0 2^1 2^2 2^3 2^4 2^5 2^6 "
" 2^7 2^8 2^9 2^10 2^11 2^12 2^13 ]\n");
- i = (sb->s_blocksize_bits + 2) * sizeof(sg.info.bb_counters[0]) +
- sizeof(struct ext4_group_info);
grinfo = ext4_get_group_info(sb, group);
/* Load the group info in memory only if not already loaded. */
if (unlikely(EXT4_MB_GRP_NEED_INIT(grinfo))) {
@@ -2319,7 +2320,7 @@
buddy_loaded = 1;
}
- memcpy(&sg, ext4_get_group_info(sb, group), i);
+ memcpy(&sg, ext4_get_group_info(sb, group), sizeof(sg));
if (buddy_loaded)
ext4_mb_unload_buddy(&e4b);
@@ -2327,7 +2328,7 @@
seq_printf(seq, "#%-5u: %-5u %-5u %-5u [", group, sg.info.bb_free,
sg.info.bb_fragments, sg.info.bb_first_free);
for (i = 0; i <= 13; i++)
- seq_printf(seq, " %-5u", i <= sb->s_blocksize_bits + 1 ?
+ seq_printf(seq, " %-5u", i <= blocksize_bits + 1 ?
sg.info.bb_counters[i] : 0);
seq_printf(seq, " ]\n");
@@ -2892,8 +2893,10 @@
break;
}
- if (discard_bio)
+ if (discard_bio) {
submit_bio_wait(discard_bio);
+ bio_put(discard_bio);
+ }
}
list_for_each_entry_safe(entry, tmp, &freed_data_list, efd_list)
diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index 13f0cad..c1cf020 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -1342,13 +1342,12 @@
struct super_block *sb;
struct buffer_head *bh_use[NAMEI_RA_SIZE];
struct buffer_head *bh, *ret = NULL;
- ext4_lblk_t start, block, b;
+ ext4_lblk_t start, block;
const u8 *name = d_name->name;
- int ra_max = 0; /* Number of bh's in the readahead
+ size_t ra_max = 0; /* Number of bh's in the readahead
buffer, bh_use[] */
- int ra_ptr = 0; /* Current index into readahead
+ size_t ra_ptr = 0; /* Current index into readahead
buffer */
- int num = 0;
ext4_lblk_t nblocks;
int i, namelen, retval;
struct ext4_filename fname;
@@ -1411,31 +1410,17 @@
if (ra_ptr >= ra_max) {
/* Refill the readahead buffer */
ra_ptr = 0;
- b = block;
- for (ra_max = 0; ra_max < NAMEI_RA_SIZE; ra_max++) {
- /*
- * Terminate if we reach the end of the
- * directory and must wrap, or if our
- * search has finished at this block.
- */
- if (b >= nblocks || (num && block == start)) {
- bh_use[ra_max] = NULL;
- break;
- }
- num++;
- bh = ext4_getblk(NULL, dir, b++, 0);
- if (IS_ERR(bh)) {
- if (ra_max == 0) {
- ret = bh;
- goto cleanup_and_exit;
- }
- break;
- }
- bh_use[ra_max] = bh;
- if (bh)
- ll_rw_block(REQ_OP_READ,
- REQ_META | REQ_PRIO,
- 1, &bh);
+ if (block < start)
+ ra_max = start - block;
+ else
+ ra_max = nblocks - block;
+ ra_max = min(ra_max, ARRAY_SIZE(bh_use));
+ retval = ext4_bread_batch(dir, block, ra_max,
+ false /* wait */, bh_use);
+ if (retval) {
+ ret = ERR_PTR(retval);
+ ra_max = 0;
+ goto cleanup_and_exit;
}
}
if ((bh = bh_use[ra_ptr++]) == NULL)
@@ -2395,19 +2380,22 @@
}
/*
- * DIR_NLINK feature is set if 1) nlinks > EXT4_LINK_MAX or 2) nlinks == 2,
- * since this indicates that nlinks count was previously 1.
+ * Set directory link count to 1 if nlinks > EXT4_LINK_MAX, or if nlinks == 2
+ * since this indicates that nlinks count was previously 1 to avoid overflowing
+ * the 16-bit i_links_count field on disk. Directories with i_nlink == 1 mean
+ * that subdirectory link counts are not being maintained accurately.
+ *
+ * The caller has already checked for i_nlink overflow in case the DIR_LINK
+ * feature is not enabled and returned -EMLINK. The is_dx() check is a proxy
+ * for checking S_ISDIR(inode) (since the INODE_INDEX feature will not be set
+ * on regular files) and to avoid creating huge/slow non-HTREE directories.
*/
static void ext4_inc_count(handle_t *handle, struct inode *inode)
{
inc_nlink(inode);
- if (is_dx(inode) && inode->i_nlink > 1) {
- /* limit is 16-bit i_links_count */
- if (inode->i_nlink >= EXT4_LINK_MAX || inode->i_nlink == 2) {
- set_nlink(inode, 1);
- ext4_set_feature_dir_nlink(inode->i_sb);
- }
- }
+ if (is_dx(inode) &&
+ (inode->i_nlink > EXT4_LINK_MAX || inode->i_nlink == 2))
+ set_nlink(inode, 1);
}
/*
diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c
index c3ed902..035cd3f 100644
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -1927,7 +1927,8 @@
n_desc_blocks = o_desc_blocks +
le16_to_cpu(es->s_reserved_gdt_blocks);
n_group = n_desc_blocks * EXT4_DESC_PER_BLOCK(sb);
- n_blocks_count = n_group * EXT4_BLOCKS_PER_GROUP(sb);
+ n_blocks_count = (ext4_fsblk_t)n_group *
+ EXT4_BLOCKS_PER_GROUP(sb);
n_group--; /* set to last group number */
}
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 0886fe8..d61a70e2 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -978,8 +978,6 @@
ei->i_es_shk_nr = 0;
ei->i_es_shrink_lblk = 0;
ei->i_reserved_data_blocks = 0;
- ei->i_reserved_meta_blocks = 0;
- ei->i_allocated_meta_blocks = 0;
ei->i_da_metadata_calc_len = 0;
ei->i_da_metadata_calc_last_lblock = 0;
spin_lock_init(&(ei->i_block_reservation_lock));
diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c
index cff4f41..82a5af9 100644
--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -317,28 +317,41 @@
*/
static int ext4_xattr_inode_read(struct inode *ea_inode, void *buf, size_t size)
{
- unsigned long block = 0;
- struct buffer_head *bh;
- int blocksize = ea_inode->i_sb->s_blocksize;
- size_t csize, copied = 0;
- void *copy_pos = buf;
+ int blocksize = 1 << ea_inode->i_blkbits;
+ int bh_count = (size + blocksize - 1) >> ea_inode->i_blkbits;
+ int tail_size = (size % blocksize) ?: blocksize;
+ struct buffer_head *bhs_inline[8];
+ struct buffer_head **bhs = bhs_inline;
+ int i, ret;
- while (copied < size) {
- csize = (size - copied) > blocksize ? blocksize : size - copied;
- bh = ext4_bread(NULL, ea_inode, block, 0);
- if (IS_ERR(bh))
- return PTR_ERR(bh);
- if (!bh)
- return -EFSCORRUPTED;
-
- memcpy(copy_pos, bh->b_data, csize);
- brelse(bh);
-
- copy_pos += csize;
- block += 1;
- copied += csize;
+ if (bh_count > ARRAY_SIZE(bhs_inline)) {
+ bhs = kmalloc_array(bh_count, sizeof(*bhs), GFP_NOFS);
+ if (!bhs)
+ return -ENOMEM;
}
- return 0;
+
+ ret = ext4_bread_batch(ea_inode, 0 /* block */, bh_count,
+ true /* wait */, bhs);
+ if (ret)
+ goto free_bhs;
+
+ for (i = 0; i < bh_count; i++) {
+ /* There shouldn't be any holes in ea_inode. */
+ if (!bhs[i]) {
+ ret = -EFSCORRUPTED;
+ goto put_bhs;
+ }
+ memcpy((char *)buf + blocksize * i, bhs[i]->b_data,
+ i < bh_count - 1 ? blocksize : tail_size);
+ }
+ ret = 0;
+put_bhs:
+ for (i = 0; i < bh_count; i++)
+ brelse(bhs[i]);
+free_bhs:
+ if (bhs != bhs_inline)
+ kfree(bhs);
+ return ret;
}
static int ext4_xattr_inode_iget(struct inode *parent, unsigned long ea_ino,
@@ -451,6 +464,7 @@
}
/* Do not add ea_inode to the cache. */
ea_inode_cache = NULL;
+ err = 0;
} else if (err)
goto out;
@@ -1815,9 +1829,6 @@
ea_bdebug(bs->bh, "modifying in-place");
error = ext4_xattr_set_entry(i, s, handle, inode,
true /* is_block */);
- if (!error)
- ext4_xattr_block_cache_insert(ea_block_cache,
- bs->bh);
ext4_xattr_block_csum_set(inode, bs->bh);
unlock_buffer(bs->bh);
if (error == -EFSCORRUPTED)
@@ -1973,6 +1984,7 @@
} else if (bs->bh && s->base == bs->bh->b_data) {
/* We were modifying this block in-place. */
ea_bdebug(bs->bh, "keeping this block");
+ ext4_xattr_block_cache_insert(ea_block_cache, bs->bh);
new_bh = bs->bh;
get_bh(new_bh);
} else {
@@ -2625,23 +2637,21 @@
struct ext4_inode *raw_inode, handle_t *handle)
{
struct ext4_xattr_ibody_header *header;
- struct buffer_head *bh = NULL;
+ struct buffer_head *bh;
+ struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
+ static unsigned int mnt_count;
size_t min_offs;
size_t ifree, bfree;
int total_ino;
void *base, *end;
int error = 0, tried_min_extra_isize = 0;
- int s_min_extra_isize = le16_to_cpu(EXT4_SB(inode->i_sb)->s_es->s_min_extra_isize);
+ int s_min_extra_isize = le16_to_cpu(sbi->s_es->s_min_extra_isize);
int isize_diff; /* How much do we need to grow i_extra_isize */
- int no_expand;
-
- if (ext4_write_trylock_xattr(inode, &no_expand) == 0)
- return 0;
retry:
isize_diff = new_extra_isize - EXT4_I(inode)->i_extra_isize;
if (EXT4_I(inode)->i_extra_isize >= new_extra_isize)
- goto out;
+ return 0;
header = IHDR(inode, raw_inode);
@@ -2676,6 +2686,7 @@
EXT4_ERROR_INODE(inode, "bad block %llu",
EXT4_I(inode)->i_file_acl);
error = -EFSCORRUPTED;
+ brelse(bh);
goto cleanup;
}
base = BHDR(bh);
@@ -2683,11 +2694,11 @@
min_offs = end - base;
bfree = ext4_xattr_free_space(BFIRST(bh), &min_offs, base,
NULL);
+ brelse(bh);
if (bfree + ifree < isize_diff) {
if (!tried_min_extra_isize && s_min_extra_isize) {
tried_min_extra_isize++;
new_extra_isize = s_min_extra_isize;
- brelse(bh);
goto retry;
}
error = -ENOSPC;
@@ -2705,7 +2716,6 @@
s_min_extra_isize) {
tried_min_extra_isize++;
new_extra_isize = s_min_extra_isize;
- brelse(bh);
goto retry;
}
goto cleanup;
@@ -2717,18 +2727,13 @@
EXT4_GOOD_OLD_INODE_SIZE + new_extra_isize,
(void *)header, total_ino);
EXT4_I(inode)->i_extra_isize = new_extra_isize;
- brelse(bh);
-out:
- ext4_write_unlock_xattr(inode, &no_expand);
- return 0;
cleanup:
- brelse(bh);
- /*
- * Inode size expansion failed; don't try again
- */
- no_expand = 1;
- ext4_write_unlock_xattr(inode, &no_expand);
+ if (error && (mnt_count != le16_to_cpu(sbi->s_es->s_mnt_count))) {
+ ext4_warning(inode->i_sb, "Unable to expand inode %lu. Delete some EAs or run e2fsck.",
+ inode->i_ino);
+ mnt_count = le16_to_cpu(sbi->s_es->s_mnt_count);
+ }
return error;
}
diff --git a/fs/f2fs/acl.c b/fs/f2fs/acl.c
index a140c5e..b4b8438 100644
--- a/fs/f2fs/acl.c
+++ b/fs/f2fs/acl.c
@@ -211,7 +211,7 @@
switch (type) {
case ACL_TYPE_ACCESS:
name_index = F2FS_XATTR_INDEX_POSIX_ACL_ACCESS;
- if (acl) {
+ if (acl && !ipage) {
error = posix_acl_update_mode(inode, &inode->i_mode, &acl);
if (error)
return error;
diff --git a/fs/f2fs/checkpoint.c b/fs/f2fs/checkpoint.c
index 56bbf59..5b876f6 100644
--- a/fs/f2fs/checkpoint.c
+++ b/fs/f2fs/checkpoint.c
@@ -879,6 +879,7 @@
struct inode *inode;
struct f2fs_inode_info *fi;
bool is_dir = (type == DIR_INODE);
+ unsigned long ino = 0;
trace_f2fs_sync_dirty_inodes_enter(sbi->sb, is_dir,
get_pages(sbi, is_dir ?
@@ -901,8 +902,17 @@
inode = igrab(&fi->vfs_inode);
spin_unlock(&sbi->inode_lock[type]);
if (inode) {
+ unsigned long cur_ino = inode->i_ino;
+
filemap_fdatawrite(inode->i_mapping);
iput(inode);
+ /* We need to give cpu to another writers. */
+ if (ino == cur_ino) {
+ congestion_wait(BLK_RW_ASYNC, HZ/50);
+ cond_resched();
+ } else {
+ ino = cur_ino;
+ }
} else {
/*
* We should submit bio, since it exists several
diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index a0e6d2c..2706130 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -1538,7 +1538,6 @@
/* Is it quota file? Do not allow user to mess with it */
if (IS_NOQUOTA(inode)) {
- inode_unlock(inode);
ret = -EPERM;
goto unlock_out;
}
@@ -1549,9 +1548,8 @@
if ((flags ^ oldflags) & (FS_APPEND_FL | FS_IMMUTABLE_FL)) {
if (!capable(CAP_LINUX_IMMUTABLE)) {
- inode_unlock(inode);
ret = -EPERM;
- goto out;
+ goto unlock_out;
}
}
@@ -1564,7 +1562,6 @@
f2fs_mark_inode_dirty_sync(inode, false);
unlock_out:
inode_unlock(inode);
-out:
mnt_drop_write_file(filp);
return ret;
}
diff --git a/fs/f2fs/sysfs.c b/fs/f2fs/sysfs.c
index 9adc202..71191d8 100644
--- a/fs/f2fs/sysfs.c
+++ b/fs/f2fs/sysfs.c
@@ -11,6 +11,7 @@
*/
#include <linux/proc_fs.h>
#include <linux/f2fs_fs.h>
+#include <linux/seq_file.h>
#include "f2fs.h"
#include "segment.h"
diff --git a/fs/filesystems.c b/fs/filesystems.c
index 8b99955..a920ad2 100644
--- a/fs/filesystems.c
+++ b/fs/filesystems.c
@@ -33,9 +33,10 @@
static DEFINE_RWLOCK(file_systems_lock);
/* WARNING: This can be used only if we _already_ own a reference */
-void get_filesystem(struct file_system_type *fs)
+struct file_system_type *get_filesystem(struct file_system_type *fs)
{
__module_get(fs->owner);
+ return fs;
}
void put_filesystem(struct file_system_type *fs)
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index 8b426f8..245c430 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -380,8 +380,8 @@
struct page *page = radix_tree_deref_slot_protected(slot,
&mapping->tree_lock);
if (likely(page) && PageDirty(page)) {
- __dec_wb_stat(old_wb, WB_RECLAIMABLE);
- __inc_wb_stat(new_wb, WB_RECLAIMABLE);
+ dec_wb_stat(old_wb, WB_RECLAIMABLE);
+ inc_wb_stat(new_wb, WB_RECLAIMABLE);
}
}
@@ -391,8 +391,8 @@
&mapping->tree_lock);
if (likely(page)) {
WARN_ON_ONCE(!PageWriteback(page));
- __dec_wb_stat(old_wb, WB_WRITEBACK);
- __inc_wb_stat(new_wb, WB_WRITEBACK);
+ dec_wb_stat(old_wb, WB_WRITEBACK);
+ inc_wb_stat(new_wb, WB_WRITEBACK);
}
}
diff --git a/fs/gfs2/dir.c b/fs/gfs2/dir.c
index db42765..5ee2e2f 100644
--- a/fs/gfs2/dir.c
+++ b/fs/gfs2/dir.c
@@ -872,7 +872,6 @@
struct buffer_head *bh;
struct gfs2_leaf *leaf;
struct gfs2_dirent *dent;
- struct qstr name = { .name = "" };
struct timespec tv = current_time(inode);
error = gfs2_alloc_blocks(ip, &bn, &n, 0, NULL);
@@ -896,7 +895,7 @@
leaf->lf_sec = cpu_to_be64(tv.tv_sec);
memset(leaf->lf_reserved2, 0, sizeof(leaf->lf_reserved2));
dent = (struct gfs2_dirent *)(leaf+1);
- gfs2_qstr2dirent(&name, bh->b_size - sizeof(struct gfs2_leaf), dent);
+ gfs2_qstr2dirent(&empty_name, bh->b_size - sizeof(struct gfs2_leaf), dent);
*pbh = bh;
return leaf;
}
diff --git a/fs/hfsplus/posix_acl.c b/fs/hfsplus/posix_acl.c
index 9b92058..6bb5d7c 100644
--- a/fs/hfsplus/posix_acl.c
+++ b/fs/hfsplus/posix_acl.c
@@ -51,8 +51,8 @@
return acl;
}
-int hfsplus_set_posix_acl(struct inode *inode, struct posix_acl *acl,
- int type)
+static int __hfsplus_set_posix_acl(struct inode *inode, struct posix_acl *acl,
+ int type)
{
int err;
char *xattr_name;
@@ -64,12 +64,6 @@
switch (type) {
case ACL_TYPE_ACCESS:
xattr_name = XATTR_NAME_POSIX_ACL_ACCESS;
- if (acl) {
- err = posix_acl_update_mode(inode, &inode->i_mode, &acl);
- if (err)
- return err;
- }
- err = 0;
break;
case ACL_TYPE_DEFAULT:
@@ -105,6 +99,18 @@
return err;
}
+int hfsplus_set_posix_acl(struct inode *inode, struct posix_acl *acl, int type)
+{
+ int err;
+
+ if (type == ACL_TYPE_ACCESS && acl) {
+ err = posix_acl_update_mode(inode, &inode->i_mode, &acl);
+ if (err)
+ return err;
+ }
+ return __hfsplus_set_posix_acl(inode, acl, type);
+}
+
int hfsplus_init_posix_acl(struct inode *inode, struct inode *dir)
{
int err = 0;
@@ -122,15 +128,15 @@
return err;
if (default_acl) {
- err = hfsplus_set_posix_acl(inode, default_acl,
- ACL_TYPE_DEFAULT);
+ err = __hfsplus_set_posix_acl(inode, default_acl,
+ ACL_TYPE_DEFAULT);
posix_acl_release(default_acl);
}
if (acl) {
if (!err)
- err = hfsplus_set_posix_acl(inode, acl,
- ACL_TYPE_ACCESS);
+ err = __hfsplus_set_posix_acl(inode, acl,
+ ACL_TYPE_ACCESS);
posix_acl_release(acl);
}
return err;
diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index 5238861..28d2753 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -46,13 +46,13 @@
static const struct inode_operations hugetlbfs_inode_operations;
struct hugetlbfs_config {
- kuid_t uid;
- kgid_t gid;
- umode_t mode;
- long max_hpages;
- long nr_inodes;
- struct hstate *hstate;
- long min_hpages;
+ struct hstate *hstate;
+ long max_hpages;
+ long nr_inodes;
+ long min_hpages;
+ kuid_t uid;
+ kgid_t gid;
+ umode_t mode;
};
struct hugetlbfs_inode_info {
@@ -861,6 +861,46 @@
return 0;
}
+/*
+ * Display the mount options in /proc/mounts.
+ */
+static int hugetlbfs_show_options(struct seq_file *m, struct dentry *root)
+{
+ struct hugetlbfs_sb_info *sbinfo = HUGETLBFS_SB(root->d_sb);
+ struct hugepage_subpool *spool = sbinfo->spool;
+ unsigned long hpage_size = huge_page_size(sbinfo->hstate);
+ unsigned hpage_shift = huge_page_shift(sbinfo->hstate);
+ char mod;
+
+ if (!uid_eq(sbinfo->uid, GLOBAL_ROOT_UID))
+ seq_printf(m, ",uid=%u",
+ from_kuid_munged(&init_user_ns, sbinfo->uid));
+ if (!gid_eq(sbinfo->gid, GLOBAL_ROOT_GID))
+ seq_printf(m, ",gid=%u",
+ from_kgid_munged(&init_user_ns, sbinfo->gid));
+ if (sbinfo->mode != 0755)
+ seq_printf(m, ",mode=%o", sbinfo->mode);
+ if (sbinfo->max_inodes != -1)
+ seq_printf(m, ",nr_inodes=%lu", sbinfo->max_inodes);
+
+ hpage_size /= 1024;
+ mod = 'K';
+ if (hpage_size >= 1024) {
+ hpage_size /= 1024;
+ mod = 'M';
+ }
+ seq_printf(m, ",pagesize=%lu%c", hpage_size, mod);
+ if (spool) {
+ if (spool->max_hpages != -1)
+ seq_printf(m, ",size=%llu",
+ (unsigned long long)spool->max_hpages << hpage_shift);
+ if (spool->min_hpages != -1)
+ seq_printf(m, ",min_size=%llu",
+ (unsigned long long)spool->min_hpages << hpage_shift);
+ }
+ return 0;
+}
+
static int hugetlbfs_statfs(struct dentry *dentry, struct kstatfs *buf)
{
struct hugetlbfs_sb_info *sbinfo = HUGETLBFS_SB(dentry->d_sb);
@@ -1019,19 +1059,19 @@
.evict_inode = hugetlbfs_evict_inode,
.statfs = hugetlbfs_statfs,
.put_super = hugetlbfs_put_super,
- .show_options = generic_show_options,
+ .show_options = hugetlbfs_show_options,
};
-enum { NO_SIZE, SIZE_STD, SIZE_PERCENT };
+enum hugetlbfs_size_type { NO_SIZE, SIZE_STD, SIZE_PERCENT };
/*
* Convert size option passed from command line to number of huge pages
* in the pool specified by hstate. Size option could be in bytes
* (val_type == SIZE_STD) or percentage of the pool (val_type == SIZE_PERCENT).
*/
-static long long
+static long
hugetlbfs_size_to_hpages(struct hstate *h, unsigned long long size_opt,
- int val_type)
+ enum hugetlbfs_size_type val_type)
{
if (val_type == NO_SIZE)
return -1;
@@ -1053,7 +1093,7 @@
substring_t args[MAX_OPT_ARGS];
int option;
unsigned long long max_size_opt = 0, min_size_opt = 0;
- int max_val_type = NO_SIZE, min_val_type = NO_SIZE;
+ enum hugetlbfs_size_type max_val_type = NO_SIZE, min_val_type = NO_SIZE;
if (!options)
return 0;
@@ -1167,8 +1207,6 @@
struct hugetlbfs_config config;
struct hugetlbfs_sb_info *sbinfo;
- save_mount_options(sb, data);
-
config.max_hpages = -1; /* No limit on size by default */
config.nr_inodes = -1; /* No limit on number of inodes by default */
config.uid = current_fsuid();
@@ -1189,6 +1227,10 @@
sbinfo->max_inodes = config.nr_inodes;
sbinfo->free_inodes = config.nr_inodes;
sbinfo->spool = NULL;
+ sbinfo->uid = config.uid;
+ sbinfo->gid = config.gid;
+ sbinfo->mode = config.mode;
+
/*
* Allocate and initialize subpool if maximum or minimum size is
* specified. Any needed reservations (for minimim size) are taken
diff --git a/fs/iomap.c b/fs/iomap.c
index 1732228..0392661 100644
--- a/fs/iomap.c
+++ b/fs/iomap.c
@@ -610,8 +610,8 @@
loff_t length = size - offset;
loff_t ret;
- /* Nothing to be found beyond the end of the file. */
- if (offset >= size)
+ /* Nothing to be found before or beyond the end of the file. */
+ if (offset < 0 || offset >= size)
return -ENXIO;
while (length > 0) {
@@ -656,8 +656,8 @@
loff_t length = size - offset;
loff_t ret;
- /* Nothing to be found beyond the end of the file. */
- if (offset >= size)
+ /* Nothing to be found before or beyond the end of the file. */
+ if (offset < 0 || offset >= size)
return -ENXIO;
while (length > 0) {
diff --git a/fs/isofs/inode.c b/fs/isofs/inode.c
index 020ba09..217a5e7 100644
--- a/fs/isofs/inode.c
+++ b/fs/isofs/inode.c
@@ -23,6 +23,7 @@
#include <linux/parser.h>
#include <linux/mpage.h>
#include <linux/user_namespace.h>
+#include <linux/seq_file.h>
#include "isofs.h"
#include "zisofs.h"
@@ -57,6 +58,7 @@
static int isofs_read_inode(struct inode *, int relocated);
static int isofs_statfs (struct dentry *, struct kstatfs *);
+static int isofs_show_options(struct seq_file *, struct dentry *);
static struct kmem_cache *isofs_inode_cachep;
@@ -123,7 +125,7 @@
.put_super = isofs_put_super,
.statfs = isofs_statfs,
.remount_fs = isofs_remount,
- .show_options = generic_show_options,
+ .show_options = isofs_show_options,
};
@@ -408,7 +410,11 @@
if (match_int(&args[0], &option))
return 0;
n = option;
- if (n > 99)
+ /*
+ * Track numbers are supposed to be in range 1-99, the
+ * mount option starts indexing at 0.
+ */
+ if (n >= 99)
return 0;
popt->session = n + 1;
break;
@@ -473,6 +479,48 @@
}
/*
+ * Display the mount options in /proc/mounts.
+ */
+static int isofs_show_options(struct seq_file *m, struct dentry *root)
+{
+ struct isofs_sb_info *sbi = ISOFS_SB(root->d_sb);
+
+ if (!sbi->s_rock) seq_puts(m, ",norock");
+ else if (!sbi->s_joliet_level) seq_puts(m, ",nojoliet");
+ if (sbi->s_cruft) seq_puts(m, ",cruft");
+ if (sbi->s_hide) seq_puts(m, ",hide");
+ if (sbi->s_nocompress) seq_puts(m, ",nocompress");
+ if (sbi->s_overriderockperm) seq_puts(m, ",overriderockperm");
+ if (sbi->s_showassoc) seq_puts(m, ",showassoc");
+ if (sbi->s_utf8) seq_puts(m, ",utf8");
+
+ if (sbi->s_check) seq_printf(m, ",check=%c", sbi->s_check);
+ if (sbi->s_mapping) seq_printf(m, ",map=%c", sbi->s_mapping);
+ if (sbi->s_session != 255) seq_printf(m, ",session=%u", sbi->s_session - 1);
+ if (sbi->s_sbsector != -1) seq_printf(m, ",sbsector=%u", sbi->s_sbsector);
+
+ if (root->d_sb->s_blocksize != 1024)
+ seq_printf(m, ",blocksize=%lu", root->d_sb->s_blocksize);
+
+ if (sbi->s_uid_set)
+ seq_printf(m, ",uid=%u",
+ from_kuid_munged(&init_user_ns, sbi->s_uid));
+ if (sbi->s_gid_set)
+ seq_printf(m, ",gid=%u",
+ from_kgid_munged(&init_user_ns, sbi->s_gid));
+
+ if (sbi->s_dmode != ISOFS_INVALID_MODE)
+ seq_printf(m, ",dmode=%o", sbi->s_dmode);
+ if (sbi->s_fmode != ISOFS_INVALID_MODE)
+ seq_printf(m, ",fmode=%o", sbi->s_fmode);
+
+ if (sbi->s_nls_iocharset &&
+ strcmp(sbi->s_nls_iocharset->charset, CONFIG_NLS_DEFAULT) != 0)
+ seq_printf(m, ",iocharset=%s", sbi->s_nls_iocharset->charset);
+ return 0;
+}
+
+/*
* look if the driver can tell the multi session redirection value
*
* don't change this if you don't know what you do, please!
@@ -499,7 +547,7 @@
vol_desc_start=0;
ms_info.addr_format=CDROM_LBA;
- if(session >= 0 && session <= 99) {
+ if (session > 0) {
struct cdrom_tocentry Te;
Te.cdte_track=session;
Te.cdte_format=CDROM_LBA;
@@ -583,8 +631,6 @@
int table, error = -EINVAL;
unsigned int vol_desc_start;
- save_mount_options(s, data);
-
sbi = kzalloc(sizeof(*sbi), GFP_KERNEL);
if (!sbi)
return -ENOMEM;
@@ -605,6 +651,8 @@
opt.blocksize = sb_min_blocksize(s, opt.blocksize);
sbi->s_high_sierra = 0; /* default is iso9660 */
+ sbi->s_session = opt.session;
+ sbi->s_sbsector = opt.sbsector;
vol_desc_start = (opt.sbsector != -1) ?
opt.sbsector : isofs_get_last_session(s,opt.session);
@@ -911,6 +959,7 @@
table += 2;
if (opt.check == 'r')
table++;
+ sbi->s_check = opt.check;
if (table)
s->s_d_op = &isofs_dentry_ops[table - 1];
diff --git a/fs/isofs/isofs.h b/fs/isofs/isofs.h
index 0ac4c1f..133a456 100644
--- a/fs/isofs/isofs.h
+++ b/fs/isofs/isofs.h
@@ -36,8 +36,11 @@
unsigned long s_max_size;
int s_rock_offset; /* offset of SUSP fields within SU area */
+ s32 s_sbsector;
unsigned char s_joliet_level;
unsigned char s_mapping;
+ unsigned char s_check;
+ unsigned char s_session;
unsigned int s_high_sierra:1;
unsigned int s_rock:2;
unsigned int s_utf8:1;
diff --git a/fs/jfs/acl.c b/fs/jfs/acl.c
index 7bc186f..2e71b6e 100644
--- a/fs/jfs/acl.c
+++ b/fs/jfs/acl.c
@@ -77,13 +77,6 @@
switch (type) {
case ACL_TYPE_ACCESS:
ea_name = XATTR_NAME_POSIX_ACL_ACCESS;
- if (acl) {
- rc = posix_acl_update_mode(inode, &inode->i_mode, &acl);
- if (rc)
- return rc;
- inode->i_ctime = current_time(inode);
- mark_inode_dirty(inode);
- }
break;
case ACL_TYPE_DEFAULT:
ea_name = XATTR_NAME_POSIX_ACL_DEFAULT;
@@ -115,12 +108,27 @@
{
int rc;
tid_t tid;
+ int update_mode = 0;
+ umode_t mode = inode->i_mode;
tid = txBegin(inode->i_sb, 0);
mutex_lock(&JFS_IP(inode)->commit_mutex);
+ if (type == ACL_TYPE_ACCESS && acl) {
+ rc = posix_acl_update_mode(inode, &mode, &acl);
+ if (rc)
+ goto end_tx;
+ update_mode = 1;
+ }
rc = __jfs_set_acl(tid, inode, type, acl);
- if (!rc)
+ if (!rc) {
+ if (update_mode) {
+ inode->i_mode = mode;
+ inode->i_ctime = current_time(inode);
+ mark_inode_dirty(inode);
+ }
rc = txCommit(tid, 1, &inode, 0);
+ }
+end_tx:
txEnd(tid);
mutex_unlock(&JFS_IP(inode)->commit_mutex);
return rc;
diff --git a/fs/jfs/resize.c b/fs/jfs/resize.c
index bd9b641..7ddcb44 100644
--- a/fs/jfs/resize.c
+++ b/fs/jfs/resize.c
@@ -98,7 +98,7 @@
goto out;
}
- VolumeSize = sb->s_bdev->bd_inode->i_size >> sb->s_blocksize_bits;
+ VolumeSize = i_size_read(sb->s_bdev->bd_inode) >> sb->s_blocksize_bits;
if (VolumeSize) {
if (newLVSize > VolumeSize) {
@@ -211,7 +211,7 @@
txQuiesce(sb);
/* Reset size of direct inode */
- sbi->direct_inode->i_size = sb->s_bdev->bd_inode->i_size;
+ sbi->direct_inode->i_size = i_size_read(sb->s_bdev->bd_inode);
if (sbi->mntflag & JFS_INLINELOG) {
/*
diff --git a/fs/jfs/super.c b/fs/jfs/super.c
index e8aad7d..78b41e1 100644
--- a/fs/jfs/super.c
+++ b/fs/jfs/super.c
@@ -313,7 +313,7 @@
}
case Opt_resize_nosize:
{
- *newLVSize = sb->s_bdev->bd_inode->i_size >>
+ *newLVSize = i_size_read(sb->s_bdev->bd_inode) >>
sb->s_blocksize_bits;
if (*newLVSize == 0)
pr_err("JFS: Cannot determine volume size\n");
@@ -579,7 +579,7 @@
goto out_unload;
}
inode->i_ino = 0;
- inode->i_size = sb->s_bdev->bd_inode->i_size;
+ inode->i_size = i_size_read(sb->s_bdev->bd_inode);
inode->i_mapping->a_ops = &jfs_metapage_aops;
hlist_add_fake(&inode->i_hash);
mapping_set_gfp_mask(inode->i_mapping, GFP_NOFS);
diff --git a/fs/lockd/clnt4xdr.c b/fs/lockd/clnt4xdr.c
index d3e40db..c349fc0 100644
--- a/fs/lockd/clnt4xdr.c
+++ b/fs/lockd/clnt4xdr.c
@@ -381,8 +381,9 @@
*/
static void nlm4_xdr_enc_testargs(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nlm_args *args)
+ const void *data)
{
+ const struct nlm_args *args = data;
const struct nlm_lock *lock = &args->lock;
encode_cookie(xdr, &args->cookie);
@@ -402,8 +403,9 @@
*/
static void nlm4_xdr_enc_lockargs(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nlm_args *args)
+ const void *data)
{
+ const struct nlm_args *args = data;
const struct nlm_lock *lock = &args->lock;
encode_cookie(xdr, &args->cookie);
@@ -424,8 +426,9 @@
*/
static void nlm4_xdr_enc_cancargs(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nlm_args *args)
+ const void *data)
{
+ const struct nlm_args *args = data;
const struct nlm_lock *lock = &args->lock;
encode_cookie(xdr, &args->cookie);
@@ -442,8 +445,9 @@
*/
static void nlm4_xdr_enc_unlockargs(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nlm_args *args)
+ const void *data)
{
+ const struct nlm_args *args = data;
const struct nlm_lock *lock = &args->lock;
encode_cookie(xdr, &args->cookie);
@@ -458,8 +462,10 @@
*/
static void nlm4_xdr_enc_res(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nlm_res *result)
+ const void *data)
{
+ const struct nlm_res *result = data;
+
encode_cookie(xdr, &result->cookie);
encode_nlm4_stat(xdr, result->status);
}
@@ -479,8 +485,10 @@
*/
static void nlm4_xdr_enc_testres(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nlm_res *result)
+ const void *data)
{
+ const struct nlm_res *result = data;
+
encode_cookie(xdr, &result->cookie);
encode_nlm4_stat(xdr, result->status);
if (result->status == nlm_lck_denied)
@@ -525,8 +533,9 @@
static int nlm4_xdr_dec_testres(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nlm_res *result)
+ void *data)
{
+ struct nlm_res *result = data;
int error;
error = decode_cookie(xdr, &result->cookie);
@@ -545,8 +554,9 @@
*/
static int nlm4_xdr_dec_res(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nlm_res *result)
+ void *data)
{
+ struct nlm_res *result = data;
int error;
error = decode_cookie(xdr, &result->cookie);
@@ -566,15 +576,15 @@
#define PROC(proc, argtype, restype) \
[NLMPROC_##proc] = { \
.p_proc = NLMPROC_##proc, \
- .p_encode = (kxdreproc_t)nlm4_xdr_enc_##argtype, \
- .p_decode = (kxdrdproc_t)nlm4_xdr_dec_##restype, \
+ .p_encode = nlm4_xdr_enc_##argtype, \
+ .p_decode = nlm4_xdr_dec_##restype, \
.p_arglen = NLM4_##argtype##_sz, \
.p_replen = NLM4_##restype##_sz, \
.p_statidx = NLMPROC_##proc, \
.p_name = #proc, \
}
-static struct rpc_procinfo nlm4_procedures[] = {
+static const struct rpc_procinfo nlm4_procedures[] = {
PROC(TEST, testargs, testres),
PROC(LOCK, lockargs, res),
PROC(CANCEL, cancargs, res),
@@ -592,8 +602,10 @@
PROC(GRANTED_RES, res, norep),
};
+static unsigned int nlm_version4_counts[ARRAY_SIZE(nlm4_procedures)];
const struct rpc_version nlm_version4 = {
.number = 4,
.nrprocs = ARRAY_SIZE(nlm4_procedures),
.procs = nlm4_procedures,
+ .counts = nlm_version4_counts,
};
diff --git a/fs/lockd/clntxdr.c b/fs/lockd/clntxdr.c
index 3e9f787..3b4724a 100644
--- a/fs/lockd/clntxdr.c
+++ b/fs/lockd/clntxdr.c
@@ -374,8 +374,9 @@
*/
static void nlm_xdr_enc_testargs(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nlm_args *args)
+ const void *data)
{
+ const struct nlm_args *args = data;
const struct nlm_lock *lock = &args->lock;
encode_cookie(xdr, &args->cookie);
@@ -395,8 +396,9 @@
*/
static void nlm_xdr_enc_lockargs(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nlm_args *args)
+ const void *data)
{
+ const struct nlm_args *args = data;
const struct nlm_lock *lock = &args->lock;
encode_cookie(xdr, &args->cookie);
@@ -417,8 +419,9 @@
*/
static void nlm_xdr_enc_cancargs(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nlm_args *args)
+ const void *data)
{
+ const struct nlm_args *args = data;
const struct nlm_lock *lock = &args->lock;
encode_cookie(xdr, &args->cookie);
@@ -435,8 +438,9 @@
*/
static void nlm_xdr_enc_unlockargs(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nlm_args *args)
+ const void *data)
{
+ const struct nlm_args *args = data;
const struct nlm_lock *lock = &args->lock;
encode_cookie(xdr, &args->cookie);
@@ -451,8 +455,10 @@
*/
static void nlm_xdr_enc_res(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nlm_res *result)
+ const void *data)
{
+ const struct nlm_res *result = data;
+
encode_cookie(xdr, &result->cookie);
encode_nlm_stat(xdr, result->status);
}
@@ -479,8 +485,10 @@
static void nlm_xdr_enc_testres(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nlm_res *result)
+ const void *data)
{
+ const struct nlm_res *result = data;
+
encode_cookie(xdr, &result->cookie);
encode_nlm_stat(xdr, result->status);
encode_nlm_testrply(xdr, result);
@@ -523,8 +531,9 @@
static int nlm_xdr_dec_testres(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nlm_res *result)
+ void *data)
{
+ struct nlm_res *result = data;
int error;
error = decode_cookie(xdr, &result->cookie);
@@ -543,8 +552,9 @@
*/
static int nlm_xdr_dec_res(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nlm_res *result)
+ void *data)
{
+ struct nlm_res *result = data;
int error;
error = decode_cookie(xdr, &result->cookie);
@@ -564,15 +574,15 @@
#define PROC(proc, argtype, restype) \
[NLMPROC_##proc] = { \
.p_proc = NLMPROC_##proc, \
- .p_encode = (kxdreproc_t)nlm_xdr_enc_##argtype, \
- .p_decode = (kxdrdproc_t)nlm_xdr_dec_##restype, \
+ .p_encode = nlm_xdr_enc_##argtype, \
+ .p_decode = nlm_xdr_dec_##restype, \
.p_arglen = NLM_##argtype##_sz, \
.p_replen = NLM_##restype##_sz, \
.p_statidx = NLMPROC_##proc, \
.p_name = #proc, \
}
-static struct rpc_procinfo nlm_procedures[] = {
+static const struct rpc_procinfo nlm_procedures[] = {
PROC(TEST, testargs, testres),
PROC(LOCK, lockargs, res),
PROC(CANCEL, cancargs, res),
@@ -590,16 +600,20 @@
PROC(GRANTED_RES, res, norep),
};
+static unsigned int nlm_version1_counts[ARRAY_SIZE(nlm_procedures)];
static const struct rpc_version nlm_version1 = {
- .number = 1,
- .nrprocs = ARRAY_SIZE(nlm_procedures),
- .procs = nlm_procedures,
+ .number = 1,
+ .nrprocs = ARRAY_SIZE(nlm_procedures),
+ .procs = nlm_procedures,
+ .counts = nlm_version1_counts,
};
+static unsigned int nlm_version3_counts[ARRAY_SIZE(nlm_procedures)];
static const struct rpc_version nlm_version3 = {
- .number = 3,
- .nrprocs = ARRAY_SIZE(nlm_procedures),
- .procs = nlm_procedures,
+ .number = 3,
+ .nrprocs = ARRAY_SIZE(nlm_procedures),
+ .procs = nlm_procedures,
+ .counts = nlm_version3_counts,
};
static const struct rpc_version *nlm_versions[] = {
@@ -613,9 +627,9 @@
static struct rpc_stat nlm_rpc_stats;
const struct rpc_program nlm_program = {
- .name = "lockd",
- .number = NLM_PROGRAM,
- .nrvers = ARRAY_SIZE(nlm_versions),
- .version = nlm_versions,
- .stats = &nlm_rpc_stats,
+ .name = "lockd",
+ .number = NLM_PROGRAM,
+ .nrvers = ARRAY_SIZE(nlm_versions),
+ .version = nlm_versions,
+ .stats = &nlm_rpc_stats,
};
diff --git a/fs/lockd/mon.c b/fs/lockd/mon.c
index 19166d4..9d8166c 100644
--- a/fs/lockd/mon.c
+++ b/fs/lockd/mon.c
@@ -476,22 +476,23 @@
}
static void nsm_xdr_enc_mon(struct rpc_rqst *req, struct xdr_stream *xdr,
- const struct nsm_args *argp)
+ const void *argp)
{
encode_mon_id(xdr, argp);
encode_priv(xdr, argp);
}
static void nsm_xdr_enc_unmon(struct rpc_rqst *req, struct xdr_stream *xdr,
- const struct nsm_args *argp)
+ const void *argp)
{
encode_mon_id(xdr, argp);
}
static int nsm_xdr_dec_stat_res(struct rpc_rqst *rqstp,
struct xdr_stream *xdr,
- struct nsm_res *resp)
+ void *data)
{
+ struct nsm_res *resp = data;
__be32 *p;
p = xdr_inline_decode(xdr, 4 + 4);
@@ -507,8 +508,9 @@
static int nsm_xdr_dec_stat(struct rpc_rqst *rqstp,
struct xdr_stream *xdr,
- struct nsm_res *resp)
+ void *data)
{
+ struct nsm_res *resp = data;
__be32 *p;
p = xdr_inline_decode(xdr, 4);
@@ -529,11 +531,11 @@
#define SM_monres_sz 2
#define SM_unmonres_sz 1
-static struct rpc_procinfo nsm_procedures[] = {
+static const struct rpc_procinfo nsm_procedures[] = {
[NSMPROC_MON] = {
.p_proc = NSMPROC_MON,
- .p_encode = (kxdreproc_t)nsm_xdr_enc_mon,
- .p_decode = (kxdrdproc_t)nsm_xdr_dec_stat_res,
+ .p_encode = nsm_xdr_enc_mon,
+ .p_decode = nsm_xdr_dec_stat_res,
.p_arglen = SM_mon_sz,
.p_replen = SM_monres_sz,
.p_statidx = NSMPROC_MON,
@@ -541,8 +543,8 @@
},
[NSMPROC_UNMON] = {
.p_proc = NSMPROC_UNMON,
- .p_encode = (kxdreproc_t)nsm_xdr_enc_unmon,
- .p_decode = (kxdrdproc_t)nsm_xdr_dec_stat,
+ .p_encode = nsm_xdr_enc_unmon,
+ .p_decode = nsm_xdr_dec_stat,
.p_arglen = SM_mon_id_sz,
.p_replen = SM_unmonres_sz,
.p_statidx = NSMPROC_UNMON,
@@ -550,10 +552,12 @@
},
};
+static unsigned int nsm_version1_counts[ARRAY_SIZE(nsm_procedures)];
static const struct rpc_version nsm_version1 = {
- .number = 1,
- .nrprocs = ARRAY_SIZE(nsm_procedures),
- .procs = nsm_procedures
+ .number = 1,
+ .nrprocs = ARRAY_SIZE(nsm_procedures),
+ .procs = nsm_procedures,
+ .counts = nsm_version1_counts,
};
static const struct rpc_version *nsm_version[] = {
@@ -563,9 +567,9 @@
static struct rpc_stat nsm_stats;
static const struct rpc_program nsm_program = {
- .name = "statd",
- .number = NSM_PROGRAM,
- .nrvers = ARRAY_SIZE(nsm_version),
- .version = nsm_version,
- .stats = &nsm_stats
+ .name = "statd",
+ .number = NSM_PROGRAM,
+ .nrvers = ARRAY_SIZE(nsm_version),
+ .version = nsm_version,
+ .stats = &nsm_stats
};
diff --git a/fs/lockd/svc.c b/fs/lockd/svc.c
index 5d481e8..726b6ce 100644
--- a/fs/lockd/svc.c
+++ b/fs/lockd/svc.c
@@ -739,27 +739,33 @@
/*
* Define NLM program and procedures
*/
-static struct svc_version nlmsvc_version1 = {
- .vs_vers = 1,
- .vs_nproc = 17,
- .vs_proc = nlmsvc_procedures,
- .vs_xdrsize = NLMSVC_XDRSIZE,
+static unsigned int nlmsvc_version1_count[17];
+static const struct svc_version nlmsvc_version1 = {
+ .vs_vers = 1,
+ .vs_nproc = 17,
+ .vs_proc = nlmsvc_procedures,
+ .vs_count = nlmsvc_version1_count,
+ .vs_xdrsize = NLMSVC_XDRSIZE,
};
-static struct svc_version nlmsvc_version3 = {
- .vs_vers = 3,
- .vs_nproc = 24,
- .vs_proc = nlmsvc_procedures,
- .vs_xdrsize = NLMSVC_XDRSIZE,
+static unsigned int nlmsvc_version3_count[24];
+static const struct svc_version nlmsvc_version3 = {
+ .vs_vers = 3,
+ .vs_nproc = 24,
+ .vs_proc = nlmsvc_procedures,
+ .vs_count = nlmsvc_version3_count,
+ .vs_xdrsize = NLMSVC_XDRSIZE,
};
#ifdef CONFIG_LOCKD_V4
-static struct svc_version nlmsvc_version4 = {
- .vs_vers = 4,
- .vs_nproc = 24,
- .vs_proc = nlmsvc_procedures4,
- .vs_xdrsize = NLMSVC_XDRSIZE,
+static unsigned int nlmsvc_version4_count[24];
+static const struct svc_version nlmsvc_version4 = {
+ .vs_vers = 4,
+ .vs_nproc = 24,
+ .vs_proc = nlmsvc_procedures4,
+ .vs_count = nlmsvc_version4_count,
+ .vs_xdrsize = NLMSVC_XDRSIZE,
};
#endif
-static struct svc_version * nlmsvc_version[] = {
+static const struct svc_version *nlmsvc_version[] = {
[1] = &nlmsvc_version1,
[3] = &nlmsvc_version3,
#ifdef CONFIG_LOCKD_V4
diff --git a/fs/lockd/svc4proc.c b/fs/lockd/svc4proc.c
index 09c576f..82925f1 100644
--- a/fs/lockd/svc4proc.c
+++ b/fs/lockd/svc4proc.c
@@ -62,7 +62,7 @@
* NULL: Test for presence of service
*/
static __be32
-nlm4svc_proc_null(struct svc_rqst *rqstp, void *argp, void *resp)
+nlm4svc_proc_null(struct svc_rqst *rqstp)
{
dprintk("lockd: NULL called\n");
return rpc_success;
@@ -72,9 +72,9 @@
* TEST: Check for conflicting lock
*/
static __be32
-nlm4svc_proc_test(struct svc_rqst *rqstp, struct nlm_args *argp,
- struct nlm_res *resp)
+__nlm4svc_proc_test(struct svc_rqst *rqstp, struct nlm_res *resp)
{
+ struct nlm_args *argp = rqstp->rq_argp;
struct nlm_host *host;
struct nlm_file *file;
__be32 rc = rpc_success;
@@ -99,9 +99,15 @@
}
static __be32
-nlm4svc_proc_lock(struct svc_rqst *rqstp, struct nlm_args *argp,
- struct nlm_res *resp)
+nlm4svc_proc_test(struct svc_rqst *rqstp)
{
+ return __nlm4svc_proc_test(rqstp, rqstp->rq_resp);
+}
+
+static __be32
+__nlm4svc_proc_lock(struct svc_rqst *rqstp, struct nlm_res *resp)
+{
+ struct nlm_args *argp = rqstp->rq_argp;
struct nlm_host *host;
struct nlm_file *file;
__be32 rc = rpc_success;
@@ -141,9 +147,15 @@
}
static __be32
-nlm4svc_proc_cancel(struct svc_rqst *rqstp, struct nlm_args *argp,
- struct nlm_res *resp)
+nlm4svc_proc_lock(struct svc_rqst *rqstp)
{
+ return __nlm4svc_proc_lock(rqstp, rqstp->rq_resp);
+}
+
+static __be32
+__nlm4svc_proc_cancel(struct svc_rqst *rqstp, struct nlm_res *resp)
+{
+ struct nlm_args *argp = rqstp->rq_argp;
struct nlm_host *host;
struct nlm_file *file;
@@ -170,13 +182,19 @@
return rpc_success;
}
+static __be32
+nlm4svc_proc_cancel(struct svc_rqst *rqstp)
+{
+ return __nlm4svc_proc_cancel(rqstp, rqstp->rq_resp);
+}
+
/*
* UNLOCK: release a lock
*/
static __be32
-nlm4svc_proc_unlock(struct svc_rqst *rqstp, struct nlm_args *argp,
- struct nlm_res *resp)
+__nlm4svc_proc_unlock(struct svc_rqst *rqstp, struct nlm_res *resp)
{
+ struct nlm_args *argp = rqstp->rq_argp;
struct nlm_host *host;
struct nlm_file *file;
@@ -203,14 +221,21 @@
return rpc_success;
}
+static __be32
+nlm4svc_proc_unlock(struct svc_rqst *rqstp)
+{
+ return __nlm4svc_proc_unlock(rqstp, rqstp->rq_resp);
+}
+
/*
* GRANTED: A server calls us to tell that a process' lock request
* was granted
*/
static __be32
-nlm4svc_proc_granted(struct svc_rqst *rqstp, struct nlm_args *argp,
- struct nlm_res *resp)
+__nlm4svc_proc_granted(struct svc_rqst *rqstp, struct nlm_res *resp)
{
+ struct nlm_args *argp = rqstp->rq_argp;
+
resp->cookie = argp->cookie;
dprintk("lockd: GRANTED called\n");
@@ -219,6 +244,12 @@
return rpc_success;
}
+static __be32
+nlm4svc_proc_granted(struct svc_rqst *rqstp)
+{
+ return __nlm4svc_proc_granted(rqstp, rqstp->rq_resp);
+}
+
/*
* This is the generic lockd callback for async RPC calls
*/
@@ -243,9 +274,10 @@
* because we send the callback before the reply proper. I hope this
* doesn't break any clients.
*/
-static __be32 nlm4svc_callback(struct svc_rqst *rqstp, u32 proc, struct nlm_args *argp,
- __be32 (*func)(struct svc_rqst *, struct nlm_args *, struct nlm_res *))
+static __be32 nlm4svc_callback(struct svc_rqst *rqstp, u32 proc,
+ __be32 (*func)(struct svc_rqst *, struct nlm_res *))
{
+ struct nlm_args *argp = rqstp->rq_argp;
struct nlm_host *host;
struct nlm_rqst *call;
__be32 stat;
@@ -261,7 +293,7 @@
if (call == NULL)
return rpc_system_err;
- stat = func(rqstp, argp, &call->a_res);
+ stat = func(rqstp, &call->a_res);
if (stat != 0) {
nlmsvc_release_call(call);
return stat;
@@ -273,48 +305,44 @@
return rpc_success;
}
-static __be32 nlm4svc_proc_test_msg(struct svc_rqst *rqstp, struct nlm_args *argp,
- void *resp)
+static __be32 nlm4svc_proc_test_msg(struct svc_rqst *rqstp)
{
dprintk("lockd: TEST_MSG called\n");
- return nlm4svc_callback(rqstp, NLMPROC_TEST_RES, argp, nlm4svc_proc_test);
+ return nlm4svc_callback(rqstp, NLMPROC_TEST_RES, __nlm4svc_proc_test);
}
-static __be32 nlm4svc_proc_lock_msg(struct svc_rqst *rqstp, struct nlm_args *argp,
- void *resp)
+static __be32 nlm4svc_proc_lock_msg(struct svc_rqst *rqstp)
{
dprintk("lockd: LOCK_MSG called\n");
- return nlm4svc_callback(rqstp, NLMPROC_LOCK_RES, argp, nlm4svc_proc_lock);
+ return nlm4svc_callback(rqstp, NLMPROC_LOCK_RES, __nlm4svc_proc_lock);
}
-static __be32 nlm4svc_proc_cancel_msg(struct svc_rqst *rqstp, struct nlm_args *argp,
- void *resp)
+static __be32 nlm4svc_proc_cancel_msg(struct svc_rqst *rqstp)
{
dprintk("lockd: CANCEL_MSG called\n");
- return nlm4svc_callback(rqstp, NLMPROC_CANCEL_RES, argp, nlm4svc_proc_cancel);
+ return nlm4svc_callback(rqstp, NLMPROC_CANCEL_RES, __nlm4svc_proc_cancel);
}
-static __be32 nlm4svc_proc_unlock_msg(struct svc_rqst *rqstp, struct nlm_args *argp,
- void *resp)
+static __be32 nlm4svc_proc_unlock_msg(struct svc_rqst *rqstp)
{
dprintk("lockd: UNLOCK_MSG called\n");
- return nlm4svc_callback(rqstp, NLMPROC_UNLOCK_RES, argp, nlm4svc_proc_unlock);
+ return nlm4svc_callback(rqstp, NLMPROC_UNLOCK_RES, __nlm4svc_proc_unlock);
}
-static __be32 nlm4svc_proc_granted_msg(struct svc_rqst *rqstp, struct nlm_args *argp,
- void *resp)
+static __be32 nlm4svc_proc_granted_msg(struct svc_rqst *rqstp)
{
dprintk("lockd: GRANTED_MSG called\n");
- return nlm4svc_callback(rqstp, NLMPROC_GRANTED_RES, argp, nlm4svc_proc_granted);
+ return nlm4svc_callback(rqstp, NLMPROC_GRANTED_RES, __nlm4svc_proc_granted);
}
/*
* SHARE: create a DOS share or alter existing share.
*/
static __be32
-nlm4svc_proc_share(struct svc_rqst *rqstp, struct nlm_args *argp,
- struct nlm_res *resp)
+nlm4svc_proc_share(struct svc_rqst *rqstp)
{
+ struct nlm_args *argp = rqstp->rq_argp;
+ struct nlm_res *resp = rqstp->rq_resp;
struct nlm_host *host;
struct nlm_file *file;
@@ -345,9 +373,10 @@
* UNSHARE: Release a DOS share.
*/
static __be32
-nlm4svc_proc_unshare(struct svc_rqst *rqstp, struct nlm_args *argp,
- struct nlm_res *resp)
+nlm4svc_proc_unshare(struct svc_rqst *rqstp)
{
+ struct nlm_args *argp = rqstp->rq_argp;
+ struct nlm_res *resp = rqstp->rq_resp;
struct nlm_host *host;
struct nlm_file *file;
@@ -378,22 +407,23 @@
* NM_LOCK: Create an unmonitored lock
*/
static __be32
-nlm4svc_proc_nm_lock(struct svc_rqst *rqstp, struct nlm_args *argp,
- struct nlm_res *resp)
+nlm4svc_proc_nm_lock(struct svc_rqst *rqstp)
{
+ struct nlm_args *argp = rqstp->rq_argp;
+
dprintk("lockd: NM_LOCK called\n");
argp->monitor = 0; /* just clean the monitor flag */
- return nlm4svc_proc_lock(rqstp, argp, resp);
+ return nlm4svc_proc_lock(rqstp);
}
/*
* FREE_ALL: Release all locks and shares held by client
*/
static __be32
-nlm4svc_proc_free_all(struct svc_rqst *rqstp, struct nlm_args *argp,
- void *resp)
+nlm4svc_proc_free_all(struct svc_rqst *rqstp)
{
+ struct nlm_args *argp = rqstp->rq_argp;
struct nlm_host *host;
/* Obtain client */
@@ -409,9 +439,10 @@
* SM_NOTIFY: private callback from statd (not part of official NLM proto)
*/
static __be32
-nlm4svc_proc_sm_notify(struct svc_rqst *rqstp, struct nlm_reboot *argp,
- void *resp)
+nlm4svc_proc_sm_notify(struct svc_rqst *rqstp)
{
+ struct nlm_reboot *argp = rqstp->rq_argp;
+
dprintk("lockd: SM_NOTIFY called\n");
if (!nlm_privileged_requester(rqstp)) {
@@ -429,9 +460,10 @@
* client sent a GRANTED_RES, let's remove the associated block
*/
static __be32
-nlm4svc_proc_granted_res(struct svc_rqst *rqstp, struct nlm_res *argp,
- void *resp)
+nlm4svc_proc_granted_res(struct svc_rqst *rqstp)
{
+ struct nlm_res *argp = rqstp->rq_argp;
+
if (!nlmsvc_ops)
return rpc_success;
@@ -463,9 +495,9 @@
struct nlm_void { int dummy; };
#define PROC(name, xargt, xrest, argt, rest, respsize) \
- { .pc_func = (svc_procfunc) nlm4svc_proc_##name, \
- .pc_decode = (kxdrproc_t) nlm4svc_decode_##xargt, \
- .pc_encode = (kxdrproc_t) nlm4svc_encode_##xrest, \
+ { .pc_func = nlm4svc_proc_##name, \
+ .pc_decode = nlm4svc_decode_##xargt, \
+ .pc_encode = nlm4svc_encode_##xrest, \
.pc_release = NULL, \
.pc_argsize = sizeof(struct nlm_##argt), \
.pc_ressize = sizeof(struct nlm_##rest), \
@@ -475,7 +507,7 @@
#define No (1+1024/4) /* netobj */
#define St 1 /* status */
#define Rg 4 /* range (offset + length) */
-struct svc_procedure nlmsvc_procedures4[] = {
+const struct svc_procedure nlmsvc_procedures4[] = {
PROC(null, void, void, void, void, 1),
PROC(test, testargs, testres, args, res, Ck+St+2+No+Rg),
PROC(lock, lockargs, res, args, res, Ck+St),
diff --git a/fs/lockd/svcproc.c b/fs/lockd/svcproc.c
index fb26b9f..0791516 100644
--- a/fs/lockd/svcproc.c
+++ b/fs/lockd/svcproc.c
@@ -92,7 +92,7 @@
* NULL: Test for presence of service
*/
static __be32
-nlmsvc_proc_null(struct svc_rqst *rqstp, void *argp, void *resp)
+nlmsvc_proc_null(struct svc_rqst *rqstp)
{
dprintk("lockd: NULL called\n");
return rpc_success;
@@ -102,9 +102,9 @@
* TEST: Check for conflicting lock
*/
static __be32
-nlmsvc_proc_test(struct svc_rqst *rqstp, struct nlm_args *argp,
- struct nlm_res *resp)
+__nlmsvc_proc_test(struct svc_rqst *rqstp, struct nlm_res *resp)
{
+ struct nlm_args *argp = rqstp->rq_argp;
struct nlm_host *host;
struct nlm_file *file;
__be32 rc = rpc_success;
@@ -130,9 +130,15 @@
}
static __be32
-nlmsvc_proc_lock(struct svc_rqst *rqstp, struct nlm_args *argp,
- struct nlm_res *resp)
+nlmsvc_proc_test(struct svc_rqst *rqstp)
{
+ return __nlmsvc_proc_test(rqstp, rqstp->rq_resp);
+}
+
+static __be32
+__nlmsvc_proc_lock(struct svc_rqst *rqstp, struct nlm_res *resp)
+{
+ struct nlm_args *argp = rqstp->rq_argp;
struct nlm_host *host;
struct nlm_file *file;
__be32 rc = rpc_success;
@@ -172,9 +178,15 @@
}
static __be32
-nlmsvc_proc_cancel(struct svc_rqst *rqstp, struct nlm_args *argp,
- struct nlm_res *resp)
+nlmsvc_proc_lock(struct svc_rqst *rqstp)
{
+ return __nlmsvc_proc_lock(rqstp, rqstp->rq_resp);
+}
+
+static __be32
+__nlmsvc_proc_cancel(struct svc_rqst *rqstp, struct nlm_res *resp)
+{
+ struct nlm_args *argp = rqstp->rq_argp;
struct nlm_host *host;
struct nlm_file *file;
struct net *net = SVC_NET(rqstp);
@@ -202,13 +214,19 @@
return rpc_success;
}
+static __be32
+nlmsvc_proc_cancel(struct svc_rqst *rqstp)
+{
+ return __nlmsvc_proc_cancel(rqstp, rqstp->rq_resp);
+}
+
/*
* UNLOCK: release a lock
*/
static __be32
-nlmsvc_proc_unlock(struct svc_rqst *rqstp, struct nlm_args *argp,
- struct nlm_res *resp)
+__nlmsvc_proc_unlock(struct svc_rqst *rqstp, struct nlm_res *resp)
{
+ struct nlm_args *argp = rqstp->rq_argp;
struct nlm_host *host;
struct nlm_file *file;
struct net *net = SVC_NET(rqstp);
@@ -236,14 +254,21 @@
return rpc_success;
}
+static __be32
+nlmsvc_proc_unlock(struct svc_rqst *rqstp)
+{
+ return __nlmsvc_proc_unlock(rqstp, rqstp->rq_resp);
+}
+
/*
* GRANTED: A server calls us to tell that a process' lock request
* was granted
*/
static __be32
-nlmsvc_proc_granted(struct svc_rqst *rqstp, struct nlm_args *argp,
- struct nlm_res *resp)
+__nlmsvc_proc_granted(struct svc_rqst *rqstp, struct nlm_res *resp)
{
+ struct nlm_args *argp = rqstp->rq_argp;
+
resp->cookie = argp->cookie;
dprintk("lockd: GRANTED called\n");
@@ -252,6 +277,12 @@
return rpc_success;
}
+static __be32
+nlmsvc_proc_granted(struct svc_rqst *rqstp)
+{
+ return __nlmsvc_proc_granted(rqstp, rqstp->rq_resp);
+}
+
/*
* This is the generic lockd callback for async RPC calls
*/
@@ -284,9 +315,10 @@
* because we send the callback before the reply proper. I hope this
* doesn't break any clients.
*/
-static __be32 nlmsvc_callback(struct svc_rqst *rqstp, u32 proc, struct nlm_args *argp,
- __be32 (*func)(struct svc_rqst *, struct nlm_args *, struct nlm_res *))
+static __be32 nlmsvc_callback(struct svc_rqst *rqstp, u32 proc,
+ __be32 (*func)(struct svc_rqst *, struct nlm_res *))
{
+ struct nlm_args *argp = rqstp->rq_argp;
struct nlm_host *host;
struct nlm_rqst *call;
__be32 stat;
@@ -302,7 +334,7 @@
if (call == NULL)
return rpc_system_err;
- stat = func(rqstp, argp, &call->a_res);
+ stat = func(rqstp, &call->a_res);
if (stat != 0) {
nlmsvc_release_call(call);
return stat;
@@ -314,50 +346,46 @@
return rpc_success;
}
-static __be32 nlmsvc_proc_test_msg(struct svc_rqst *rqstp, struct nlm_args *argp,
- void *resp)
+static __be32 nlmsvc_proc_test_msg(struct svc_rqst *rqstp)
{
dprintk("lockd: TEST_MSG called\n");
- return nlmsvc_callback(rqstp, NLMPROC_TEST_RES, argp, nlmsvc_proc_test);
+ return nlmsvc_callback(rqstp, NLMPROC_TEST_RES, __nlmsvc_proc_test);
}
-static __be32 nlmsvc_proc_lock_msg(struct svc_rqst *rqstp, struct nlm_args *argp,
- void *resp)
+static __be32 nlmsvc_proc_lock_msg(struct svc_rqst *rqstp)
{
dprintk("lockd: LOCK_MSG called\n");
- return nlmsvc_callback(rqstp, NLMPROC_LOCK_RES, argp, nlmsvc_proc_lock);
+ return nlmsvc_callback(rqstp, NLMPROC_LOCK_RES, __nlmsvc_proc_lock);
}
-static __be32 nlmsvc_proc_cancel_msg(struct svc_rqst *rqstp, struct nlm_args *argp,
- void *resp)
+static __be32 nlmsvc_proc_cancel_msg(struct svc_rqst *rqstp)
{
dprintk("lockd: CANCEL_MSG called\n");
- return nlmsvc_callback(rqstp, NLMPROC_CANCEL_RES, argp, nlmsvc_proc_cancel);
+ return nlmsvc_callback(rqstp, NLMPROC_CANCEL_RES, __nlmsvc_proc_cancel);
}
static __be32
-nlmsvc_proc_unlock_msg(struct svc_rqst *rqstp, struct nlm_args *argp,
- void *resp)
+nlmsvc_proc_unlock_msg(struct svc_rqst *rqstp)
{
dprintk("lockd: UNLOCK_MSG called\n");
- return nlmsvc_callback(rqstp, NLMPROC_UNLOCK_RES, argp, nlmsvc_proc_unlock);
+ return nlmsvc_callback(rqstp, NLMPROC_UNLOCK_RES, __nlmsvc_proc_unlock);
}
static __be32
-nlmsvc_proc_granted_msg(struct svc_rqst *rqstp, struct nlm_args *argp,
- void *resp)
+nlmsvc_proc_granted_msg(struct svc_rqst *rqstp)
{
dprintk("lockd: GRANTED_MSG called\n");
- return nlmsvc_callback(rqstp, NLMPROC_GRANTED_RES, argp, nlmsvc_proc_granted);
+ return nlmsvc_callback(rqstp, NLMPROC_GRANTED_RES, __nlmsvc_proc_granted);
}
/*
* SHARE: create a DOS share or alter existing share.
*/
static __be32
-nlmsvc_proc_share(struct svc_rqst *rqstp, struct nlm_args *argp,
- struct nlm_res *resp)
+nlmsvc_proc_share(struct svc_rqst *rqstp)
{
+ struct nlm_args *argp = rqstp->rq_argp;
+ struct nlm_res *resp = rqstp->rq_resp;
struct nlm_host *host;
struct nlm_file *file;
@@ -388,9 +416,10 @@
* UNSHARE: Release a DOS share.
*/
static __be32
-nlmsvc_proc_unshare(struct svc_rqst *rqstp, struct nlm_args *argp,
- struct nlm_res *resp)
+nlmsvc_proc_unshare(struct svc_rqst *rqstp)
{
+ struct nlm_args *argp = rqstp->rq_argp;
+ struct nlm_res *resp = rqstp->rq_resp;
struct nlm_host *host;
struct nlm_file *file;
@@ -421,22 +450,23 @@
* NM_LOCK: Create an unmonitored lock
*/
static __be32
-nlmsvc_proc_nm_lock(struct svc_rqst *rqstp, struct nlm_args *argp,
- struct nlm_res *resp)
+nlmsvc_proc_nm_lock(struct svc_rqst *rqstp)
{
+ struct nlm_args *argp = rqstp->rq_argp;
+
dprintk("lockd: NM_LOCK called\n");
argp->monitor = 0; /* just clean the monitor flag */
- return nlmsvc_proc_lock(rqstp, argp, resp);
+ return nlmsvc_proc_lock(rqstp);
}
/*
* FREE_ALL: Release all locks and shares held by client
*/
static __be32
-nlmsvc_proc_free_all(struct svc_rqst *rqstp, struct nlm_args *argp,
- void *resp)
+nlmsvc_proc_free_all(struct svc_rqst *rqstp)
{
+ struct nlm_args *argp = rqstp->rq_argp;
struct nlm_host *host;
/* Obtain client */
@@ -452,9 +482,10 @@
* SM_NOTIFY: private callback from statd (not part of official NLM proto)
*/
static __be32
-nlmsvc_proc_sm_notify(struct svc_rqst *rqstp, struct nlm_reboot *argp,
- void *resp)
+nlmsvc_proc_sm_notify(struct svc_rqst *rqstp)
{
+ struct nlm_reboot *argp = rqstp->rq_argp;
+
dprintk("lockd: SM_NOTIFY called\n");
if (!nlm_privileged_requester(rqstp)) {
@@ -472,9 +503,10 @@
* client sent a GRANTED_RES, let's remove the associated block
*/
static __be32
-nlmsvc_proc_granted_res(struct svc_rqst *rqstp, struct nlm_res *argp,
- void *resp)
+nlmsvc_proc_granted_res(struct svc_rqst *rqstp)
{
+ struct nlm_res *argp = rqstp->rq_argp;
+
if (!nlmsvc_ops)
return rpc_success;
@@ -505,9 +537,9 @@
struct nlm_void { int dummy; };
#define PROC(name, xargt, xrest, argt, rest, respsize) \
- { .pc_func = (svc_procfunc) nlmsvc_proc_##name, \
- .pc_decode = (kxdrproc_t) nlmsvc_decode_##xargt, \
- .pc_encode = (kxdrproc_t) nlmsvc_encode_##xrest, \
+ { .pc_func = nlmsvc_proc_##name, \
+ .pc_decode = nlmsvc_decode_##xargt, \
+ .pc_encode = nlmsvc_encode_##xrest, \
.pc_release = NULL, \
.pc_argsize = sizeof(struct nlm_##argt), \
.pc_ressize = sizeof(struct nlm_##rest), \
@@ -519,7 +551,7 @@
#define No (1+1024/4) /* Net Obj */
#define Rg 2 /* range - offset + size */
-struct svc_procedure nlmsvc_procedures[] = {
+const struct svc_procedure nlmsvc_procedures[] = {
PROC(null, void, void, void, void, 1),
PROC(test, testargs, testres, args, res, Ck+St+2+No+Rg),
PROC(lock, lockargs, res, args, res, Ck+St),
diff --git a/fs/lockd/xdr.c b/fs/lockd/xdr.c
index 5b651da..442bbd0 100644
--- a/fs/lockd/xdr.c
+++ b/fs/lockd/xdr.c
@@ -182,8 +182,9 @@
* First, the server side XDR functions
*/
int
-nlmsvc_decode_testargs(struct svc_rqst *rqstp, __be32 *p, nlm_args *argp)
+nlmsvc_decode_testargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nlm_args *argp = rqstp->rq_argp;
u32 exclusive;
if (!(p = nlm_decode_cookie(p, &argp->cookie)))
@@ -199,16 +200,19 @@
}
int
-nlmsvc_encode_testres(struct svc_rqst *rqstp, __be32 *p, struct nlm_res *resp)
+nlmsvc_encode_testres(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nlm_res *resp = rqstp->rq_resp;
+
if (!(p = nlm_encode_testres(p, resp)))
return 0;
return xdr_ressize_check(rqstp, p);
}
int
-nlmsvc_decode_lockargs(struct svc_rqst *rqstp, __be32 *p, nlm_args *argp)
+nlmsvc_decode_lockargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nlm_args *argp = rqstp->rq_argp;
u32 exclusive;
if (!(p = nlm_decode_cookie(p, &argp->cookie)))
@@ -227,8 +231,9 @@
}
int
-nlmsvc_decode_cancargs(struct svc_rqst *rqstp, __be32 *p, nlm_args *argp)
+nlmsvc_decode_cancargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nlm_args *argp = rqstp->rq_argp;
u32 exclusive;
if (!(p = nlm_decode_cookie(p, &argp->cookie)))
@@ -243,8 +248,10 @@
}
int
-nlmsvc_decode_unlockargs(struct svc_rqst *rqstp, __be32 *p, nlm_args *argp)
+nlmsvc_decode_unlockargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nlm_args *argp = rqstp->rq_argp;
+
if (!(p = nlm_decode_cookie(p, &argp->cookie))
|| !(p = nlm_decode_lock(p, &argp->lock)))
return 0;
@@ -253,8 +260,9 @@
}
int
-nlmsvc_decode_shareargs(struct svc_rqst *rqstp, __be32 *p, nlm_args *argp)
+nlmsvc_decode_shareargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nlm_args *argp = rqstp->rq_argp;
struct nlm_lock *lock = &argp->lock;
memset(lock, 0, sizeof(*lock));
@@ -274,8 +282,10 @@
}
int
-nlmsvc_encode_shareres(struct svc_rqst *rqstp, __be32 *p, struct nlm_res *resp)
+nlmsvc_encode_shareres(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nlm_res *resp = rqstp->rq_resp;
+
if (!(p = nlm_encode_cookie(p, &resp->cookie)))
return 0;
*p++ = resp->status;
@@ -284,8 +294,10 @@
}
int
-nlmsvc_encode_res(struct svc_rqst *rqstp, __be32 *p, struct nlm_res *resp)
+nlmsvc_encode_res(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nlm_res *resp = rqstp->rq_resp;
+
if (!(p = nlm_encode_cookie(p, &resp->cookie)))
return 0;
*p++ = resp->status;
@@ -293,8 +305,9 @@
}
int
-nlmsvc_decode_notify(struct svc_rqst *rqstp, __be32 *p, struct nlm_args *argp)
+nlmsvc_decode_notify(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nlm_args *argp = rqstp->rq_argp;
struct nlm_lock *lock = &argp->lock;
if (!(p = xdr_decode_string_inplace(p, &lock->caller,
@@ -305,8 +318,10 @@
}
int
-nlmsvc_decode_reboot(struct svc_rqst *rqstp, __be32 *p, struct nlm_reboot *argp)
+nlmsvc_decode_reboot(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nlm_reboot *argp = rqstp->rq_argp;
+
if (!(p = xdr_decode_string_inplace(p, &argp->mon, &argp->len, SM_MAXSTRLEN)))
return 0;
argp->state = ntohl(*p++);
@@ -316,8 +331,10 @@
}
int
-nlmsvc_decode_res(struct svc_rqst *rqstp, __be32 *p, struct nlm_res *resp)
+nlmsvc_decode_res(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nlm_res *resp = rqstp->rq_argp;
+
if (!(p = nlm_decode_cookie(p, &resp->cookie)))
return 0;
resp->status = *p++;
@@ -325,13 +342,13 @@
}
int
-nlmsvc_decode_void(struct svc_rqst *rqstp, __be32 *p, void *dummy)
+nlmsvc_decode_void(struct svc_rqst *rqstp, __be32 *p)
{
return xdr_argsize_check(rqstp, p);
}
int
-nlmsvc_encode_void(struct svc_rqst *rqstp, __be32 *p, void *dummy)
+nlmsvc_encode_void(struct svc_rqst *rqstp, __be32 *p)
{
return xdr_ressize_check(rqstp, p);
}
diff --git a/fs/lockd/xdr4.c b/fs/lockd/xdr4.c
index dfa4789..2a0cd56 100644
--- a/fs/lockd/xdr4.c
+++ b/fs/lockd/xdr4.c
@@ -179,8 +179,9 @@
* First, the server side XDR functions
*/
int
-nlm4svc_decode_testargs(struct svc_rqst *rqstp, __be32 *p, nlm_args *argp)
+nlm4svc_decode_testargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nlm_args *argp = rqstp->rq_argp;
u32 exclusive;
if (!(p = nlm4_decode_cookie(p, &argp->cookie)))
@@ -196,16 +197,19 @@
}
int
-nlm4svc_encode_testres(struct svc_rqst *rqstp, __be32 *p, struct nlm_res *resp)
+nlm4svc_encode_testres(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nlm_res *resp = rqstp->rq_resp;
+
if (!(p = nlm4_encode_testres(p, resp)))
return 0;
return xdr_ressize_check(rqstp, p);
}
int
-nlm4svc_decode_lockargs(struct svc_rqst *rqstp, __be32 *p, nlm_args *argp)
+nlm4svc_decode_lockargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nlm_args *argp = rqstp->rq_argp;
u32 exclusive;
if (!(p = nlm4_decode_cookie(p, &argp->cookie)))
@@ -224,8 +228,9 @@
}
int
-nlm4svc_decode_cancargs(struct svc_rqst *rqstp, __be32 *p, nlm_args *argp)
+nlm4svc_decode_cancargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nlm_args *argp = rqstp->rq_argp;
u32 exclusive;
if (!(p = nlm4_decode_cookie(p, &argp->cookie)))
@@ -240,8 +245,10 @@
}
int
-nlm4svc_decode_unlockargs(struct svc_rqst *rqstp, __be32 *p, nlm_args *argp)
+nlm4svc_decode_unlockargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nlm_args *argp = rqstp->rq_argp;
+
if (!(p = nlm4_decode_cookie(p, &argp->cookie))
|| !(p = nlm4_decode_lock(p, &argp->lock)))
return 0;
@@ -250,8 +257,9 @@
}
int
-nlm4svc_decode_shareargs(struct svc_rqst *rqstp, __be32 *p, nlm_args *argp)
+nlm4svc_decode_shareargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nlm_args *argp = rqstp->rq_argp;
struct nlm_lock *lock = &argp->lock;
memset(lock, 0, sizeof(*lock));
@@ -271,8 +279,10 @@
}
int
-nlm4svc_encode_shareres(struct svc_rqst *rqstp, __be32 *p, struct nlm_res *resp)
+nlm4svc_encode_shareres(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nlm_res *resp = rqstp->rq_resp;
+
if (!(p = nlm4_encode_cookie(p, &resp->cookie)))
return 0;
*p++ = resp->status;
@@ -281,8 +291,10 @@
}
int
-nlm4svc_encode_res(struct svc_rqst *rqstp, __be32 *p, struct nlm_res *resp)
+nlm4svc_encode_res(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nlm_res *resp = rqstp->rq_resp;
+
if (!(p = nlm4_encode_cookie(p, &resp->cookie)))
return 0;
*p++ = resp->status;
@@ -290,8 +302,9 @@
}
int
-nlm4svc_decode_notify(struct svc_rqst *rqstp, __be32 *p, struct nlm_args *argp)
+nlm4svc_decode_notify(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nlm_args *argp = rqstp->rq_argp;
struct nlm_lock *lock = &argp->lock;
if (!(p = xdr_decode_string_inplace(p, &lock->caller,
@@ -302,8 +315,10 @@
}
int
-nlm4svc_decode_reboot(struct svc_rqst *rqstp, __be32 *p, struct nlm_reboot *argp)
+nlm4svc_decode_reboot(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nlm_reboot *argp = rqstp->rq_argp;
+
if (!(p = xdr_decode_string_inplace(p, &argp->mon, &argp->len, SM_MAXSTRLEN)))
return 0;
argp->state = ntohl(*p++);
@@ -313,8 +328,10 @@
}
int
-nlm4svc_decode_res(struct svc_rqst *rqstp, __be32 *p, struct nlm_res *resp)
+nlm4svc_decode_res(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nlm_res *resp = rqstp->rq_argp;
+
if (!(p = nlm4_decode_cookie(p, &resp->cookie)))
return 0;
resp->status = *p++;
@@ -322,13 +339,13 @@
}
int
-nlm4svc_decode_void(struct svc_rqst *rqstp, __be32 *p, void *dummy)
+nlm4svc_decode_void(struct svc_rqst *rqstp, __be32 *p)
{
return xdr_argsize_check(rqstp, p);
}
int
-nlm4svc_encode_void(struct svc_rqst *rqstp, __be32 *p, void *dummy)
+nlm4svc_encode_void(struct svc_rqst *rqstp, __be32 *p)
{
return xdr_ressize_check(rqstp, p);
}
diff --git a/fs/mount.h b/fs/mount.h
index de45d9e..6790767 100644
--- a/fs/mount.h
+++ b/fs/mount.h
@@ -16,7 +16,7 @@
u64 event;
unsigned int mounts; /* # of mounts in the namespace */
unsigned int pending_mounts;
-};
+} __randomize_layout;
struct mnt_pcp {
int mnt_count;
@@ -69,7 +69,7 @@
struct hlist_head mnt_pins;
struct fs_pin mnt_umount;
struct dentry *mnt_ex_mountpoint;
-};
+} __randomize_layout;
#define MNT_NS_INTERNAL ERR_PTR(-EINVAL) /* distinct from any mnt_namespace */
diff --git a/fs/namei.c b/fs/namei.c
index e0b46eb..ddb6a7c 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -524,7 +524,7 @@
struct inode *link_inode;
unsigned root_seq;
int dfd;
-};
+} __randomize_layout;
static void set_nameidata(struct nameidata *p, int dfd, struct filename *name)
{
@@ -3400,7 +3400,6 @@
struct dentry *vfs_tmpfile(struct dentry *dentry, umode_t mode, int open_flag)
{
- static const struct qstr name = QSTR_INIT("/", 1);
struct dentry *child = NULL;
struct inode *dir = dentry->d_inode;
struct inode *inode;
@@ -3414,7 +3413,7 @@
if (!dir->i_op->tmpfile)
goto out_err;
error = -ENOMEM;
- child = d_alloc(dentry, &name);
+ child = d_alloc(dentry, &slash_name);
if (unlikely(!child))
goto out_err;
error = dir->i_op->tmpfile(dir, child, mode);
diff --git a/fs/namespace.c b/fs/namespace.c
index 81f934b..f8893dc 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -1238,65 +1238,6 @@
return &p->mnt;
}
-static inline void mangle(struct seq_file *m, const char *s)
-{
- seq_escape(m, s, " \t\n\\");
-}
-
-/*
- * Simple .show_options callback for filesystems which don't want to
- * implement more complex mount option showing.
- *
- * See also save_mount_options().
- */
-int generic_show_options(struct seq_file *m, struct dentry *root)
-{
- const char *options;
-
- rcu_read_lock();
- options = rcu_dereference(root->d_sb->s_options);
-
- if (options != NULL && options[0]) {
- seq_putc(m, ',');
- mangle(m, options);
- }
- rcu_read_unlock();
-
- return 0;
-}
-EXPORT_SYMBOL(generic_show_options);
-
-/*
- * If filesystem uses generic_show_options(), this function should be
- * called from the fill_super() callback.
- *
- * The .remount_fs callback usually needs to be handled in a special
- * way, to make sure, that previous options are not overwritten if the
- * remount fails.
- *
- * Also note, that if the filesystem's .remount_fs function doesn't
- * reset all options to their default value, but changes only newly
- * given options, then the displayed options will not reflect reality
- * any more.
- */
-void save_mount_options(struct super_block *sb, char *options)
-{
- BUG_ON(sb->s_options);
- rcu_assign_pointer(sb->s_options, kstrdup(options, GFP_KERNEL));
-}
-EXPORT_SYMBOL(save_mount_options);
-
-void replace_mount_options(struct super_block *sb, char *options)
-{
- char *old = sb->s_options;
- rcu_assign_pointer(sb->s_options, options);
- if (old) {
- synchronize_rcu();
- kfree(old);
- }
-}
-EXPORT_SYMBOL(replace_mount_options);
-
#ifdef CONFIG_PROC_FS
/* iterator; we want it to have access to namespace_sem, thus here... */
static void *m_start(struct seq_file *m, loff_t *pos)
@@ -1657,7 +1598,7 @@
namespace_unlock();
}
-/*
+/*
* Is the caller allowed to modify his namespace?
*/
static inline bool may_mount(void)
@@ -2211,7 +2152,7 @@
err = -EINVAL;
if (mnt_ns_loop(old_path.dentry))
- goto out;
+ goto out;
mp = lock_mount(path);
err = PTR_ERR(mp);
diff --git a/fs/nfs/Makefile b/fs/nfs/Makefile
index 98f4e57..1fb1189 100644
--- a/fs/nfs/Makefile
+++ b/fs/nfs/Makefile
@@ -7,7 +7,7 @@
CFLAGS_nfstrace.o += -I$(src)
nfs-y := client.o dir.o file.o getroot.o inode.o super.o \
io.o direct.o pagelist.o read.o symlink.o unlink.o \
- write.o namespace.o mount_clnt.o nfstrace.o
+ write.o namespace.o mount_clnt.o nfstrace.o export.o
nfs-$(CONFIG_ROOT_NFS) += nfsroot.o
nfs-$(CONFIG_SYSCTL) += sysctl.o
nfs-$(CONFIG_NFS_FSCACHE) += fscache.o fscache-index.o
diff --git a/fs/nfs/callback.c b/fs/nfs/callback.c
index 73a1f92..3432387 100644
--- a/fs/nfs/callback.c
+++ b/fs/nfs/callback.c
@@ -439,7 +439,7 @@
/*
* Define NFS4 callback program
*/
-static struct svc_version *nfs4_callback_version[] = {
+static const struct svc_version *nfs4_callback_version[] = {
[1] = &nfs4_callback_version1,
[4] = &nfs4_callback_version4,
};
diff --git a/fs/nfs/callback.h b/fs/nfs/callback.h
index c701c30..3dc54d7 100644
--- a/fs/nfs/callback.h
+++ b/fs/nfs/callback.h
@@ -114,8 +114,7 @@
uint32_t csr_target_highestslotid;
};
-extern __be32 nfs4_callback_sequence(struct cb_sequenceargs *args,
- struct cb_sequenceres *res,
+extern __be32 nfs4_callback_sequence(void *argp, void *resp,
struct cb_process_state *cps);
#define RCA4_TYPE_MASK_RDATA_DLG 0
@@ -134,15 +133,13 @@
uint32_t craa_type_mask;
};
-extern __be32 nfs4_callback_recallany(struct cb_recallanyargs *args,
- void *dummy,
+extern __be32 nfs4_callback_recallany(void *argp, void *resp,
struct cb_process_state *cps);
struct cb_recallslotargs {
uint32_t crsa_target_highest_slotid;
};
-extern __be32 nfs4_callback_recallslot(struct cb_recallslotargs *args,
- void *dummy,
+extern __be32 nfs4_callback_recallslot(void *argp, void *resp,
struct cb_process_state *cps);
struct cb_layoutrecallargs {
@@ -159,9 +156,8 @@
};
};
-extern __be32 nfs4_callback_layoutrecall(
- struct cb_layoutrecallargs *args,
- void *dummy, struct cb_process_state *cps);
+extern __be32 nfs4_callback_layoutrecall(void *argp, void *resp,
+ struct cb_process_state *cps);
struct cb_devicenotifyitem {
uint32_t cbd_notify_type;
@@ -175,9 +171,8 @@
struct cb_devicenotifyitem *devs;
};
-extern __be32 nfs4_callback_devicenotify(
- struct cb_devicenotifyargs *args,
- void *dummy, struct cb_process_state *cps);
+extern __be32 nfs4_callback_devicenotify(void *argp, void *resp,
+ struct cb_process_state *cps);
struct cb_notify_lock_args {
struct nfs_fh cbnl_fh;
@@ -185,15 +180,13 @@
bool cbnl_valid;
};
-extern __be32 nfs4_callback_notify_lock(struct cb_notify_lock_args *args,
- void *dummy,
+extern __be32 nfs4_callback_notify_lock(void *argp, void *resp,
struct cb_process_state *cps);
#endif /* CONFIG_NFS_V4_1 */
extern int check_gss_callback_principal(struct nfs_client *, struct svc_rqst *);
-extern __be32 nfs4_callback_getattr(struct cb_getattrargs *args,
- struct cb_getattrres *res,
+extern __be32 nfs4_callback_getattr(void *argp, void *resp,
struct cb_process_state *cps);
-extern __be32 nfs4_callback_recall(struct cb_recallargs *args, void *dummy,
+extern __be32 nfs4_callback_recall(void *argp, void *resp,
struct cb_process_state *cps);
#if IS_ENABLED(CONFIG_NFS_V4)
extern int nfs_callback_up(u32 minorversion, struct rpc_xprt *xprt);
diff --git a/fs/nfs/callback_proc.c b/fs/nfs/callback_proc.c
index 52479f1..5427cdf 100644
--- a/fs/nfs/callback_proc.c
+++ b/fs/nfs/callback_proc.c
@@ -19,10 +19,11 @@
#define NFSDBG_FACILITY NFSDBG_CALLBACK
-__be32 nfs4_callback_getattr(struct cb_getattrargs *args,
- struct cb_getattrres *res,
+__be32 nfs4_callback_getattr(void *argp, void *resp,
struct cb_process_state *cps)
{
+ struct cb_getattrargs *args = argp;
+ struct cb_getattrres *res = resp;
struct nfs_delegation *delegation;
struct nfs_inode *nfsi;
struct inode *inode;
@@ -68,9 +69,10 @@
return res->status;
}
-__be32 nfs4_callback_recall(struct cb_recallargs *args, void *dummy,
+__be32 nfs4_callback_recall(void *argp, void *resp,
struct cb_process_state *cps)
{
+ struct cb_recallargs *args = argp;
struct inode *inode;
__be32 res;
@@ -324,9 +326,10 @@
return initiate_bulk_draining(clp, args);
}
-__be32 nfs4_callback_layoutrecall(struct cb_layoutrecallargs *args,
- void *dummy, struct cb_process_state *cps)
+__be32 nfs4_callback_layoutrecall(void *argp, void *resp,
+ struct cb_process_state *cps)
{
+ struct cb_layoutrecallargs *args = argp;
u32 res = NFS4ERR_OP_NOT_IN_SESSION;
if (cps->clp)
@@ -345,9 +348,10 @@
do_callback_layoutrecall(clp, &args);
}
-__be32 nfs4_callback_devicenotify(struct cb_devicenotifyargs *args,
- void *dummy, struct cb_process_state *cps)
+__be32 nfs4_callback_devicenotify(void *argp, void *resp,
+ struct cb_process_state *cps)
{
+ struct cb_devicenotifyargs *args = argp;
int i;
__be32 res = 0;
struct nfs_client *clp = cps->clp;
@@ -469,10 +473,11 @@
return status;
}
-__be32 nfs4_callback_sequence(struct cb_sequenceargs *args,
- struct cb_sequenceres *res,
+__be32 nfs4_callback_sequence(void *argp, void *resp,
struct cb_process_state *cps)
{
+ struct cb_sequenceargs *args = argp;
+ struct cb_sequenceres *res = resp;
struct nfs4_slot_table *tbl;
struct nfs4_slot *slot;
struct nfs_client *clp;
@@ -571,9 +576,10 @@
return (mask & ~RCA4_TYPE_MASK_ALL) == 0;
}
-__be32 nfs4_callback_recallany(struct cb_recallanyargs *args, void *dummy,
+__be32 nfs4_callback_recallany(void *argp, void *resp,
struct cb_process_state *cps)
{
+ struct cb_recallanyargs *args = argp;
__be32 status;
fmode_t flags = 0;
@@ -606,9 +612,10 @@
}
/* Reduce the fore channel's max_slots to the target value */
-__be32 nfs4_callback_recallslot(struct cb_recallslotargs *args, void *dummy,
+__be32 nfs4_callback_recallslot(void *argp, void *resp,
struct cb_process_state *cps)
{
+ struct cb_recallslotargs *args = argp;
struct nfs4_slot_table *fc_tbl;
__be32 status;
@@ -631,9 +638,11 @@
return status;
}
-__be32 nfs4_callback_notify_lock(struct cb_notify_lock_args *args, void *dummy,
+__be32 nfs4_callback_notify_lock(void *argp, void *resp,
struct cb_process_state *cps)
{
+ struct cb_notify_lock_args *args = argp;
+
if (!cps->clp) /* set in cb_sequence */
return htonl(NFS4ERR_OP_NOT_IN_SESSION);
diff --git a/fs/nfs/callback_xdr.c b/fs/nfs/callback_xdr.c
index 390ac9c..681dd64 100644
--- a/fs/nfs/callback_xdr.c
+++ b/fs/nfs/callback_xdr.c
@@ -43,32 +43,27 @@
/* Internal error code */
#define NFS4ERR_RESOURCE_HDR 11050
-typedef __be32 (*callback_process_op_t)(void *, void *,
- struct cb_process_state *);
-typedef __be32 (*callback_decode_arg_t)(struct svc_rqst *, struct xdr_stream *, void *);
-typedef __be32 (*callback_encode_res_t)(struct svc_rqst *, struct xdr_stream *, void *);
-
-
struct callback_op {
- callback_process_op_t process_op;
- callback_decode_arg_t decode_args;
- callback_encode_res_t encode_res;
+ __be32 (*process_op)(void *, void *, struct cb_process_state *);
+ __be32 (*decode_args)(struct svc_rqst *, struct xdr_stream *, void *);
+ __be32 (*encode_res)(struct svc_rqst *, struct xdr_stream *,
+ const void *);
long res_maxsize;
};
static struct callback_op callback_ops[];
-static __be32 nfs4_callback_null(struct svc_rqst *rqstp, void *argp, void *resp)
+static __be32 nfs4_callback_null(struct svc_rqst *rqstp)
{
return htonl(NFS4_OK);
}
-static int nfs4_decode_void(struct svc_rqst *rqstp, __be32 *p, void *dummy)
+static int nfs4_decode_void(struct svc_rqst *rqstp, __be32 *p)
{
return xdr_argsize_check(rqstp, p);
}
-static int nfs4_encode_void(struct svc_rqst *rqstp, __be32 *p, void *dummy)
+static int nfs4_encode_void(struct svc_rqst *rqstp, __be32 *p)
{
return xdr_ressize_check(rqstp, p);
}
@@ -184,8 +179,10 @@
return 0;
}
-static __be32 decode_getattr_args(struct svc_rqst *rqstp, struct xdr_stream *xdr, struct cb_getattrargs *args)
+static __be32 decode_getattr_args(struct svc_rqst *rqstp,
+ struct xdr_stream *xdr, void *argp)
{
+ struct cb_getattrargs *args = argp;
__be32 status;
status = decode_fh(xdr, &args->fh);
@@ -194,8 +191,10 @@
return decode_bitmap(xdr, args->bitmap);
}
-static __be32 decode_recall_args(struct svc_rqst *rqstp, struct xdr_stream *xdr, struct cb_recallargs *args)
+static __be32 decode_recall_args(struct svc_rqst *rqstp,
+ struct xdr_stream *xdr, void *argp)
{
+ struct cb_recallargs *args = argp;
__be32 *p;
__be32 status;
@@ -217,9 +216,9 @@
}
static __be32 decode_layoutrecall_args(struct svc_rqst *rqstp,
- struct xdr_stream *xdr,
- struct cb_layoutrecallargs *args)
+ struct xdr_stream *xdr, void *argp)
{
+ struct cb_layoutrecallargs *args = argp;
__be32 *p;
__be32 status = 0;
uint32_t iomode;
@@ -262,8 +261,9 @@
static
__be32 decode_devicenotify_args(struct svc_rqst *rqstp,
struct xdr_stream *xdr,
- struct cb_devicenotifyargs *args)
+ void *argp)
{
+ struct cb_devicenotifyargs *args = argp;
__be32 *p;
__be32 status = 0;
u32 tmp;
@@ -403,8 +403,9 @@
static __be32 decode_cb_sequence_args(struct svc_rqst *rqstp,
struct xdr_stream *xdr,
- struct cb_sequenceargs *args)
+ void *argp)
{
+ struct cb_sequenceargs *args = argp;
__be32 *p;
int i;
__be32 status;
@@ -450,8 +451,9 @@
static __be32 decode_recallany_args(struct svc_rqst *rqstp,
struct xdr_stream *xdr,
- struct cb_recallanyargs *args)
+ void *argp)
{
+ struct cb_recallanyargs *args = argp;
uint32_t bitmap[2];
__be32 *p, status;
@@ -469,8 +471,9 @@
static __be32 decode_recallslot_args(struct svc_rqst *rqstp,
struct xdr_stream *xdr,
- struct cb_recallslotargs *args)
+ void *argp)
{
+ struct cb_recallslotargs *args = argp;
__be32 *p;
p = read_buf(xdr, 4);
@@ -510,8 +513,10 @@
return 0;
}
-static __be32 decode_notify_lock_args(struct svc_rqst *rqstp, struct xdr_stream *xdr, struct cb_notify_lock_args *args)
+static __be32 decode_notify_lock_args(struct svc_rqst *rqstp,
+ struct xdr_stream *xdr, void *argp)
{
+ struct cb_notify_lock_args *args = argp;
__be32 status;
status = decode_fh(xdr, &args->cbnl_fh);
@@ -641,8 +646,10 @@
return 0;
}
-static __be32 encode_getattr_res(struct svc_rqst *rqstp, struct xdr_stream *xdr, const struct cb_getattrres *res)
+static __be32 encode_getattr_res(struct svc_rqst *rqstp, struct xdr_stream *xdr,
+ const void *resp)
{
+ const struct cb_getattrres *res = resp;
__be32 *savep = NULL;
__be32 status = res->status;
@@ -683,8 +690,9 @@
static __be32 encode_cb_sequence_res(struct svc_rqst *rqstp,
struct xdr_stream *xdr,
- const struct cb_sequenceres *res)
+ const void *resp)
{
+ const struct cb_sequenceres *res = resp;
__be32 *p;
__be32 status = res->csr_status;
@@ -871,7 +879,7 @@
/*
* Decode, process and encode a COMPOUND
*/
-static __be32 nfs4_callback_compound(struct svc_rqst *rqstp, void *argp, void *resp)
+static __be32 nfs4_callback_compound(struct svc_rqst *rqstp)
{
struct cb_compound_hdr_arg hdr_arg = { 0 };
struct cb_compound_hdr_res hdr_res = { NULL };
@@ -907,7 +915,8 @@
while (status == 0 && nops != hdr_arg.nops) {
status = process_op(nops, rqstp, &xdr_in,
- argp, &xdr_out, resp, &cps);
+ rqstp->rq_argp, &xdr_out, rqstp->rq_resp,
+ &cps);
nops++;
}
@@ -937,48 +946,46 @@
.res_maxsize = CB_OP_HDR_RES_MAXSZ,
},
[OP_CB_GETATTR] = {
- .process_op = (callback_process_op_t)nfs4_callback_getattr,
- .decode_args = (callback_decode_arg_t)decode_getattr_args,
- .encode_res = (callback_encode_res_t)encode_getattr_res,
+ .process_op = nfs4_callback_getattr,
+ .decode_args = decode_getattr_args,
+ .encode_res = encode_getattr_res,
.res_maxsize = CB_OP_GETATTR_RES_MAXSZ,
},
[OP_CB_RECALL] = {
- .process_op = (callback_process_op_t)nfs4_callback_recall,
- .decode_args = (callback_decode_arg_t)decode_recall_args,
+ .process_op = nfs4_callback_recall,
+ .decode_args = decode_recall_args,
.res_maxsize = CB_OP_RECALL_RES_MAXSZ,
},
#if defined(CONFIG_NFS_V4_1)
[OP_CB_LAYOUTRECALL] = {
- .process_op = (callback_process_op_t)nfs4_callback_layoutrecall,
- .decode_args =
- (callback_decode_arg_t)decode_layoutrecall_args,
+ .process_op = nfs4_callback_layoutrecall,
+ .decode_args = decode_layoutrecall_args,
.res_maxsize = CB_OP_LAYOUTRECALL_RES_MAXSZ,
},
[OP_CB_NOTIFY_DEVICEID] = {
- .process_op = (callback_process_op_t)nfs4_callback_devicenotify,
- .decode_args =
- (callback_decode_arg_t)decode_devicenotify_args,
+ .process_op = nfs4_callback_devicenotify,
+ .decode_args = decode_devicenotify_args,
.res_maxsize = CB_OP_DEVICENOTIFY_RES_MAXSZ,
},
[OP_CB_SEQUENCE] = {
- .process_op = (callback_process_op_t)nfs4_callback_sequence,
- .decode_args = (callback_decode_arg_t)decode_cb_sequence_args,
- .encode_res = (callback_encode_res_t)encode_cb_sequence_res,
+ .process_op = nfs4_callback_sequence,
+ .decode_args = decode_cb_sequence_args,
+ .encode_res = encode_cb_sequence_res,
.res_maxsize = CB_OP_SEQUENCE_RES_MAXSZ,
},
[OP_CB_RECALL_ANY] = {
- .process_op = (callback_process_op_t)nfs4_callback_recallany,
- .decode_args = (callback_decode_arg_t)decode_recallany_args,
+ .process_op = nfs4_callback_recallany,
+ .decode_args = decode_recallany_args,
.res_maxsize = CB_OP_RECALLANY_RES_MAXSZ,
},
[OP_CB_RECALL_SLOT] = {
- .process_op = (callback_process_op_t)nfs4_callback_recallslot,
- .decode_args = (callback_decode_arg_t)decode_recallslot_args,
+ .process_op = nfs4_callback_recallslot,
+ .decode_args = decode_recallslot_args,
.res_maxsize = CB_OP_RECALLSLOT_RES_MAXSZ,
},
[OP_CB_NOTIFY_LOCK] = {
- .process_op = (callback_process_op_t)nfs4_callback_notify_lock,
- .decode_args = (callback_decode_arg_t)decode_notify_lock_args,
+ .process_op = nfs4_callback_notify_lock,
+ .decode_args = decode_notify_lock_args,
.res_maxsize = CB_OP_NOTIFY_LOCK_RES_MAXSZ,
},
#endif /* CONFIG_NFS_V4_1 */
@@ -987,36 +994,40 @@
/*
* Define NFS4 callback procedures
*/
-static struct svc_procedure nfs4_callback_procedures1[] = {
+static const struct svc_procedure nfs4_callback_procedures1[] = {
[CB_NULL] = {
.pc_func = nfs4_callback_null,
- .pc_decode = (kxdrproc_t)nfs4_decode_void,
- .pc_encode = (kxdrproc_t)nfs4_encode_void,
+ .pc_decode = nfs4_decode_void,
+ .pc_encode = nfs4_encode_void,
.pc_xdrressize = 1,
},
[CB_COMPOUND] = {
.pc_func = nfs4_callback_compound,
- .pc_encode = (kxdrproc_t)nfs4_encode_void,
+ .pc_encode = nfs4_encode_void,
.pc_argsize = 256,
.pc_ressize = 256,
.pc_xdrressize = NFS4_CALLBACK_BUFSIZE,
}
};
-struct svc_version nfs4_callback_version1 = {
+static unsigned int nfs4_callback_count1[ARRAY_SIZE(nfs4_callback_procedures1)];
+const struct svc_version nfs4_callback_version1 = {
.vs_vers = 1,
.vs_nproc = ARRAY_SIZE(nfs4_callback_procedures1),
.vs_proc = nfs4_callback_procedures1,
+ .vs_count = nfs4_callback_count1,
.vs_xdrsize = NFS4_CALLBACK_XDRSIZE,
.vs_dispatch = NULL,
.vs_hidden = true,
.vs_need_cong_ctrl = true,
};
-struct svc_version nfs4_callback_version4 = {
+static unsigned int nfs4_callback_count4[ARRAY_SIZE(nfs4_callback_procedures1)];
+const struct svc_version nfs4_callback_version4 = {
.vs_vers = 4,
.vs_nproc = ARRAY_SIZE(nfs4_callback_procedures1),
.vs_proc = nfs4_callback_procedures1,
+ .vs_count = nfs4_callback_count4,
.vs_xdrsize = NFS4_CALLBACK_XDRSIZE,
.vs_dispatch = NULL,
.vs_hidden = true,
diff --git a/fs/nfs/client.c b/fs/nfs/client.c
index ee5ddbd..efebe6c 100644
--- a/fs/nfs/client.c
+++ b/fs/nfs/client.c
@@ -820,6 +820,7 @@
target->caps = source->caps;
target->options = source->options;
target->auth_info = source->auth_info;
+ target->port = source->port;
}
EXPORT_SYMBOL_GPL(nfs_server_copy_userdata);
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 2ac00bf..3522b12 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -151,7 +151,7 @@
struct nfs_cache_array_entry array[0];
};
-typedef int (*decode_dirent_t)(struct xdr_stream *, struct nfs_entry *, int);
+typedef int (*decode_dirent_t)(struct xdr_stream *, struct nfs_entry *, bool);
typedef struct {
struct file *file;
struct page *page;
@@ -165,8 +165,8 @@
unsigned long timestamp;
unsigned long gencount;
unsigned int cache_entry_index;
- unsigned int plus:1;
- unsigned int eof:1;
+ bool plus;
+ bool eof;
} nfs_readdir_descriptor_t;
/*
@@ -355,7 +355,7 @@
if (error == -ENOTSUPP && desc->plus) {
NFS_SERVER(inode)->caps &= ~NFS_CAP_READDIRPLUS;
clear_bit(NFS_INO_ADVISE_RDPLUS, &NFS_I(inode)->flags);
- desc->plus = 0;
+ desc->plus = false;
goto again;
}
goto error;
@@ -557,7 +557,7 @@
count++;
- if (desc->plus != 0)
+ if (desc->plus)
nfs_prime_dcache(file_dentry(desc->file), entry);
status = nfs_readdir_add_to_array(entry, page);
@@ -860,7 +860,7 @@
desc->ctx = ctx;
desc->dir_cookie = &dir_ctx->dir_cookie;
desc->decode = NFS_PROTO(inode)->decode_dirent;
- desc->plus = nfs_use_readdirplus(inode, ctx) ? 1 : 0;
+ desc->plus = nfs_use_readdirplus(inode, ctx);
if (ctx->pos == 0 || nfs_attribute_cache_expired(inode))
res = nfs_revalidate_mapping(inode, file->f_mapping);
@@ -885,8 +885,8 @@
clear_bit(NFS_INO_ADVISE_RDPLUS, &NFS_I(inode)->flags);
nfs_zap_caches(inode);
desc->page_index = 0;
- desc->plus = 0;
- desc->eof = 0;
+ desc->plus = false;
+ desc->eof = false;
continue;
}
if (res < 0)
@@ -1115,11 +1115,13 @@
/* Force a full look up iff the parent directory has changed */
if (!nfs_is_exclusive_create(dir, flags) &&
nfs_check_verifier(dir, dentry, flags & LOOKUP_RCU)) {
-
- if (nfs_lookup_verify_inode(inode, flags)) {
+ error = nfs_lookup_verify_inode(inode, flags);
+ if (error) {
if (flags & LOOKUP_RCU)
return -ECHILD;
- goto out_zap_parent;
+ if (error == -ESTALE)
+ goto out_zap_parent;
+ goto out_error;
}
nfs_advise_use_readdirplus(dir);
goto out_valid;
@@ -1144,8 +1146,10 @@
trace_nfs_lookup_revalidate_enter(dir, dentry, flags);
error = NFS_PROTO(dir)->lookup(dir, &dentry->d_name, fhandle, fattr, label);
trace_nfs_lookup_revalidate_exit(dir, dentry, flags, error);
- if (error)
+ if (error == -ESTALE || error == -ENOENT)
goto out_bad;
+ if (error)
+ goto out_error;
if (nfs_compare_fh(NFS_FH(inode), fhandle))
goto out_bad;
if ((error = nfs_refresh_inode(inode, fattr)) != 0)
@@ -1427,8 +1431,10 @@
err = finish_open(file, dentry, do_open, opened);
if (err)
goto out;
- nfs_file_set_open_context(file, ctx);
-
+ if (S_ISREG(file->f_path.dentry->d_inode->i_mode))
+ nfs_file_set_open_context(file, ctx);
+ else
+ err = -ESTALE;
out:
return err;
}
@@ -1512,7 +1518,7 @@
d_drop(dentry);
switch (err) {
case -ENOENT:
- d_add(dentry, NULL);
+ d_splice_alias(NULL, dentry);
nfs_set_verifier(dentry, nfs_save_change_attribute(dir));
break;
case -EISDIR:
@@ -2035,7 +2041,11 @@
}
error = rpc_wait_for_completion_task(task);
- if (error == 0)
+ if (error != 0) {
+ ((struct nfs_renamedata *)task->tk_calldata)->cancelled = 1;
+ /* Paired with the atomic_dec_and_test() barrier in rpc_do_put_task() */
+ smp_wmb();
+ } else
error = task->tk_status;
rpc_put_task(task);
nfs_mark_for_revalidate(old_inode);
@@ -2362,16 +2372,40 @@
}
EXPORT_SYMBOL_GPL(nfs_access_add_cache);
+#define NFS_MAY_READ (NFS4_ACCESS_READ)
+#define NFS_MAY_WRITE (NFS4_ACCESS_MODIFY | \
+ NFS4_ACCESS_EXTEND | \
+ NFS4_ACCESS_DELETE)
+#define NFS_FILE_MAY_WRITE (NFS4_ACCESS_MODIFY | \
+ NFS4_ACCESS_EXTEND)
+#define NFS_DIR_MAY_WRITE NFS_MAY_WRITE
+#define NFS_MAY_LOOKUP (NFS4_ACCESS_LOOKUP)
+#define NFS_MAY_EXECUTE (NFS4_ACCESS_EXECUTE)
+static int
+nfs_access_calc_mask(u32 access_result, umode_t umode)
+{
+ int mask = 0;
+
+ if (access_result & NFS_MAY_READ)
+ mask |= MAY_READ;
+ if (S_ISDIR(umode)) {
+ if ((access_result & NFS_DIR_MAY_WRITE) == NFS_DIR_MAY_WRITE)
+ mask |= MAY_WRITE;
+ if ((access_result & NFS_MAY_LOOKUP) == NFS_MAY_LOOKUP)
+ mask |= MAY_EXEC;
+ } else if (S_ISREG(umode)) {
+ if ((access_result & NFS_FILE_MAY_WRITE) == NFS_FILE_MAY_WRITE)
+ mask |= MAY_WRITE;
+ if ((access_result & NFS_MAY_EXECUTE) == NFS_MAY_EXECUTE)
+ mask |= MAY_EXEC;
+ } else if (access_result & NFS_MAY_WRITE)
+ mask |= MAY_WRITE;
+ return mask;
+}
+
void nfs_access_set_mask(struct nfs_access_entry *entry, u32 access_result)
{
- entry->mask = 0;
- if (access_result & NFS4_ACCESS_READ)
- entry->mask |= MAY_READ;
- if (access_result &
- (NFS4_ACCESS_MODIFY | NFS4_ACCESS_EXTEND | NFS4_ACCESS_DELETE))
- entry->mask |= MAY_WRITE;
- if (access_result & (NFS4_ACCESS_LOOKUP|NFS4_ACCESS_EXECUTE))
- entry->mask |= MAY_EXEC;
+ entry->mask = access_result;
}
EXPORT_SYMBOL_GPL(nfs_access_set_mask);
@@ -2379,6 +2413,7 @@
{
struct nfs_access_entry cache;
bool may_block = (mask & MAY_NOT_BLOCK) == 0;
+ int cache_mask;
int status;
trace_nfs_access_enter(inode);
@@ -2394,7 +2429,8 @@
goto out;
/* Be clever: ask server to check for all possible rights */
- cache.mask = MAY_EXEC | MAY_WRITE | MAY_READ;
+ cache.mask = NFS_MAY_LOOKUP | NFS_MAY_EXECUTE
+ | NFS_MAY_WRITE | NFS_MAY_READ;
cache.cred = cred;
cache.jiffies = jiffies;
status = NFS_PROTO(inode)->access(inode, &cache);
@@ -2408,7 +2444,8 @@
}
nfs_access_add_cache(inode, &cache);
out_cached:
- if ((mask & ~cache.mask & (MAY_READ | MAY_WRITE | MAY_EXEC)) != 0)
+ cache_mask = nfs_access_calc_mask(cache.mask, inode->i_mode);
+ if ((mask & ~cache_mask & (MAY_READ | MAY_WRITE | MAY_EXEC)) != 0)
status = -EACCES;
out:
trace_nfs_access_exit(inode, status);
diff --git a/fs/nfs/export.c b/fs/nfs/export.c
new file mode 100644
index 0000000..249cb96
--- /dev/null
+++ b/fs/nfs/export.c
@@ -0,0 +1,177 @@
+/*
+ * Copyright (c) 2015, Primary Data, Inc. All rights reserved.
+ *
+ * Tao Peng <bergwolf@primarydata.com>
+ */
+#include <linux/dcache.h>
+#include <linux/exportfs.h>
+#include <linux/nfs.h>
+#include <linux/nfs_fs.h>
+
+#include "internal.h"
+#include "nfstrace.h"
+
+#define NFSDBG_FACILITY NFSDBG_VFS
+
+enum {
+ FILEID_HIGH_OFF = 0, /* inode fileid high */
+ FILEID_LOW_OFF, /* inode fileid low */
+ FILE_I_TYPE_OFF, /* inode type */
+ EMBED_FH_OFF /* embeded server fh */
+};
+
+
+static struct nfs_fh *nfs_exp_embedfh(__u32 *p)
+{
+ return (struct nfs_fh *)(p + EMBED_FH_OFF);
+}
+
+/*
+ * Let's break subtree checking for now... otherwise we'll have to embed parent fh
+ * but there might not be enough space.
+ */
+static int
+nfs_encode_fh(struct inode *inode, __u32 *p, int *max_len, struct inode *parent)
+{
+ struct nfs_fh *server_fh = NFS_FH(inode);
+ struct nfs_fh *clnt_fh = nfs_exp_embedfh(p);
+ size_t fh_size = offsetof(struct nfs_fh, data) + server_fh->size;
+ int len = EMBED_FH_OFF + XDR_QUADLEN(fh_size);
+
+ dprintk("%s: max fh len %d inode %p parent %p",
+ __func__, *max_len, inode, parent);
+
+ if (*max_len < len || IS_AUTOMOUNT(inode)) {
+ dprintk("%s: fh len %d too small, required %d\n",
+ __func__, *max_len, len);
+ *max_len = len;
+ return FILEID_INVALID;
+ }
+ if (IS_AUTOMOUNT(inode)) {
+ *max_len = FILEID_INVALID;
+ goto out;
+ }
+
+ p[FILEID_HIGH_OFF] = NFS_FILEID(inode) >> 32;
+ p[FILEID_LOW_OFF] = NFS_FILEID(inode);
+ p[FILE_I_TYPE_OFF] = inode->i_mode & S_IFMT;
+ p[len - 1] = 0; /* Padding */
+ nfs_copy_fh(clnt_fh, server_fh);
+ *max_len = len;
+out:
+ dprintk("%s: result fh fileid %llu mode %u size %d\n",
+ __func__, NFS_FILEID(inode), inode->i_mode, *max_len);
+ return *max_len;
+}
+
+static struct dentry *
+nfs_fh_to_dentry(struct super_block *sb, struct fid *fid,
+ int fh_len, int fh_type)
+{
+ struct nfs4_label *label = NULL;
+ struct nfs_fattr *fattr = NULL;
+ struct nfs_fh *server_fh = nfs_exp_embedfh(fid->raw);
+ size_t fh_size = offsetof(struct nfs_fh, data) + server_fh->size;
+ const struct nfs_rpc_ops *rpc_ops;
+ struct dentry *dentry;
+ struct inode *inode;
+ int len = EMBED_FH_OFF + XDR_QUADLEN(fh_size);
+ u32 *p = fid->raw;
+ int ret;
+
+ /* NULL translates to ESTALE */
+ if (fh_len < len || fh_type != len)
+ return NULL;
+
+ fattr = nfs_alloc_fattr();
+ if (fattr == NULL) {
+ dentry = ERR_PTR(-ENOMEM);
+ goto out;
+ }
+
+ fattr->fileid = ((u64)p[FILEID_HIGH_OFF] << 32) + p[FILEID_LOW_OFF];
+ fattr->mode = p[FILE_I_TYPE_OFF];
+ fattr->valid |= NFS_ATTR_FATTR_FILEID | NFS_ATTR_FATTR_TYPE;
+
+ dprintk("%s: fileid %llu mode %d\n", __func__, fattr->fileid, fattr->mode);
+
+ inode = nfs_ilookup(sb, fattr, server_fh);
+ if (inode)
+ goto out_found;
+
+ label = nfs4_label_alloc(NFS_SB(sb), GFP_KERNEL);
+ if (IS_ERR(label)) {
+ dentry = ERR_CAST(label);
+ goto out_free_fattr;
+ }
+
+ rpc_ops = NFS_SB(sb)->nfs_client->rpc_ops;
+ ret = rpc_ops->getattr(NFS_SB(sb), server_fh, fattr, label);
+ if (ret) {
+ dprintk("%s: getattr failed %d\n", __func__, ret);
+ dentry = ERR_PTR(ret);
+ goto out_free_label;
+ }
+
+ inode = nfs_fhget(sb, server_fh, fattr, label);
+
+out_found:
+ dentry = d_obtain_alias(inode);
+
+out_free_label:
+ nfs4_label_free(label);
+out_free_fattr:
+ nfs_free_fattr(fattr);
+out:
+ return dentry;
+}
+
+static struct dentry *
+nfs_get_parent(struct dentry *dentry)
+{
+ int ret;
+ struct inode *inode = d_inode(dentry), *pinode;
+ struct super_block *sb = inode->i_sb;
+ struct nfs_server *server = NFS_SB(sb);
+ struct nfs_fattr *fattr = NULL;
+ struct nfs4_label *label = NULL;
+ struct dentry *parent;
+ struct nfs_rpc_ops const *ops = server->nfs_client->rpc_ops;
+ struct nfs_fh fh;
+
+ if (!ops->lookupp)
+ return ERR_PTR(-EACCES);
+
+ fattr = nfs_alloc_fattr();
+ if (fattr == NULL) {
+ parent = ERR_PTR(-ENOMEM);
+ goto out;
+ }
+
+ label = nfs4_label_alloc(server, GFP_KERNEL);
+ if (IS_ERR(label)) {
+ parent = ERR_CAST(label);
+ goto out_free_fattr;
+ }
+
+ ret = ops->lookupp(inode, &fh, fattr, label);
+ if (ret) {
+ parent = ERR_PTR(ret);
+ goto out_free_label;
+ }
+
+ pinode = nfs_fhget(sb, &fh, fattr, label);
+ parent = d_obtain_alias(pinode);
+out_free_label:
+ nfs4_label_free(label);
+out_free_fattr:
+ nfs_free_fattr(fattr);
+out:
+ return parent;
+}
+
+const struct export_operations nfs_export_ops = {
+ .encode_fh = nfs_encode_fh,
+ .fh_to_dentry = nfs_fh_to_dentry,
+ .get_parent = nfs_get_parent,
+};
diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index 5713eb3..af330c3 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -617,6 +617,8 @@
if (result)
goto out;
}
+ if (iocb->ki_pos > i_size_read(inode))
+ nfs_revalidate_mapping(inode, file->f_mapping);
nfs_start_io_write(inode);
result = generic_write_checks(iocb, from);
@@ -750,7 +752,7 @@
*/
nfs_sync_mapping(filp->f_mapping);
if (!NFS_PROTO(inode)->have_delegation(inode, FMODE_READ))
- nfs_zap_mapping(inode, filp->f_mapping);
+ nfs_zap_caches(inode);
out:
return status;
}
diff --git a/fs/nfs/filelayout/filelayout.c b/fs/nfs/filelayout/filelayout.c
index 1cf85d6..44c638b 100644
--- a/fs/nfs/filelayout/filelayout.c
+++ b/fs/nfs/filelayout/filelayout.c
@@ -126,32 +126,13 @@
{
struct pnfs_layout_hdr *lo = lseg->pls_layout;
struct inode *inode = lo->plh_inode;
- struct nfs_server *mds_server = NFS_SERVER(inode);
struct nfs4_deviceid_node *devid = FILELAYOUT_DEVID_NODE(lseg);
- struct nfs_client *mds_client = mds_server->nfs_client;
struct nfs4_slot_table *tbl = &clp->cl_session->fc_slot_table;
if (task->tk_status >= 0)
return 0;
switch (task->tk_status) {
- /* MDS state errors */
- case -NFS4ERR_DELEG_REVOKED:
- case -NFS4ERR_ADMIN_REVOKED:
- case -NFS4ERR_BAD_STATEID:
- case -NFS4ERR_OPENMODE:
- if (state == NULL)
- break;
- if (nfs4_schedule_stateid_recovery(mds_server, state) < 0)
- goto out_bad_stateid;
- goto wait_on_recovery;
- case -NFS4ERR_EXPIRED:
- if (state != NULL) {
- if (nfs4_schedule_stateid_recovery(mds_server, state) < 0)
- goto out_bad_stateid;
- }
- nfs4_schedule_lease_recovery(mds_client);
- goto wait_on_recovery;
/* DS session errors */
case -NFS4ERR_BADSESSION:
case -NFS4ERR_BADSLOT:
@@ -172,6 +153,7 @@
case -NFS4ERR_RETRY_UNCACHED_REP:
break;
/* Invalidate Layout errors */
+ case -NFS4ERR_ACCESS:
case -NFS4ERR_PNFS_NO_LAYOUT:
case -ESTALE: /* mapped NFS4ERR_STALE */
case -EBADHANDLE: /* mapped NFS4ERR_BADHANDLE */
@@ -202,26 +184,17 @@
task->tk_status);
nfs4_mark_deviceid_unavailable(devid);
pnfs_error_mark_layout_for_return(inode, lseg);
+ pnfs_set_lo_fail(lseg);
rpc_wake_up(&tbl->slot_tbl_waitq);
/* fall through */
default:
- pnfs_set_lo_fail(lseg);
reset:
dprintk("%s Retry through MDS. Error %d\n", __func__,
task->tk_status);
return -NFS4ERR_RESET_TO_MDS;
}
-out:
task->tk_status = 0;
return -EAGAIN;
-out_bad_stateid:
- task->tk_status = -EIO;
- return 0;
-wait_on_recovery:
- rpc_sleep_on(&mds_client->cl_rpcwaitq, task, NULL);
- if (test_bit(NFS4CLNT_MANAGER_RUNNING, &mds_client->cl_state) == 0)
- rpc_wake_up_queued_task(&mds_client->cl_rpcwaitq, task);
- goto out;
}
/* NFS_PROTO call done callback routines */
@@ -569,6 +542,10 @@
struct nfs4_file_layout_dsaddr *dsaddr;
int status = -EINVAL;
+ /* Is the deviceid already set? If so, we're good. */
+ if (fl->dsaddr != NULL)
+ return 0;
+
/* find and reference the deviceid */
d = nfs4_find_get_deviceid(NFS_SERVER(lo->plh_inode), &fl->deviceid,
lo->plh_lc_cred, gfp_flags);
@@ -580,8 +557,6 @@
if (filelayout_test_devid_unavailable(&dsaddr->id_node))
goto out_put;
- fl->dsaddr = dsaddr;
-
if (fl->first_stripe_index >= dsaddr->stripe_count) {
dprintk("%s Bad first_stripe_index %u\n",
__func__, fl->first_stripe_index);
@@ -597,6 +572,13 @@
goto out_put;
}
status = 0;
+
+ /*
+ * Atomic compare and xchange to ensure we don't scribble
+ * over a non-NULL pointer.
+ */
+ if (cmpxchg(&fl->dsaddr, NULL, dsaddr) != NULL)
+ goto out_put;
out:
return status;
out_put:
diff --git a/fs/nfs/flexfilelayout/flexfilelayout.c b/fs/nfs/flexfilelayout/flexfilelayout.c
index 23542dc..b0fa83a 100644
--- a/fs/nfs/flexfilelayout/flexfilelayout.c
+++ b/fs/nfs/flexfilelayout/flexfilelayout.c
@@ -1050,34 +1050,10 @@
{
struct pnfs_layout_hdr *lo = lseg->pls_layout;
struct inode *inode = lo->plh_inode;
- struct nfs_server *mds_server = NFS_SERVER(inode);
-
struct nfs4_deviceid_node *devid = FF_LAYOUT_DEVID_NODE(lseg, idx);
- struct nfs_client *mds_client = mds_server->nfs_client;
struct nfs4_slot_table *tbl = &clp->cl_session->fc_slot_table;
switch (task->tk_status) {
- /* MDS state errors */
- case -NFS4ERR_DELEG_REVOKED:
- case -NFS4ERR_ADMIN_REVOKED:
- case -NFS4ERR_BAD_STATEID:
- if (state == NULL)
- break;
- nfs_remove_bad_delegation(state->inode, NULL);
- case -NFS4ERR_OPENMODE:
- if (state == NULL)
- break;
- if (nfs4_schedule_stateid_recovery(mds_server, state) < 0)
- goto out_bad_stateid;
- goto wait_on_recovery;
- case -NFS4ERR_EXPIRED:
- if (state != NULL) {
- if (nfs4_schedule_stateid_recovery(mds_server, state) < 0)
- goto out_bad_stateid;
- }
- nfs4_schedule_lease_recovery(mds_client);
- goto wait_on_recovery;
- /* DS session errors */
case -NFS4ERR_BADSESSION:
case -NFS4ERR_BADSLOT:
case -NFS4ERR_BAD_HIGH_SLOT:
@@ -1137,17 +1113,8 @@
task->tk_status);
return -NFS4ERR_RESET_TO_MDS;
}
-out:
task->tk_status = 0;
return -EAGAIN;
-out_bad_stateid:
- task->tk_status = -EIO;
- return 0;
-wait_on_recovery:
- rpc_sleep_on(&mds_client->cl_rpcwaitq, task, NULL);
- if (test_bit(NFS4CLNT_MANAGER_RUNNING, &mds_client->cl_state) == 0)
- rpc_wake_up_queued_task(&mds_client->cl_rpcwaitq, task);
- goto out;
}
/* Retry all errors through either pNFS or MDS except for -EJUKEBOX */
@@ -1875,6 +1842,10 @@
int vers, ret;
struct nfs_fh *fh;
+ if (!lseg || !(pnfs_is_valid_lseg(lseg) ||
+ test_bit(NFS_LSEG_LAYOUTRETURN, &lseg->pls_flags)))
+ goto out_err;
+
idx = calc_ds_index_from_commit(lseg, data->ds_commit_index);
ds = nfs4_ff_layout_prepare_ds(lseg, idx, true);
if (!ds)
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index 1de93ba..109279d 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -386,6 +386,28 @@
#endif
EXPORT_SYMBOL_GPL(nfs_setsecurity);
+/* Search for inode identified by fh, fileid and i_mode in inode cache. */
+struct inode *
+nfs_ilookup(struct super_block *sb, struct nfs_fattr *fattr, struct nfs_fh *fh)
+{
+ struct nfs_find_desc desc = {
+ .fh = fh,
+ .fattr = fattr,
+ };
+ struct inode *inode;
+ unsigned long hash;
+
+ if (!(fattr->valid & NFS_ATTR_FATTR_FILEID) ||
+ !(fattr->valid & NFS_ATTR_FATTR_TYPE))
+ return NULL;
+
+ hash = nfs_fattr_to_ino_t(fattr);
+ inode = ilookup5(sb, hash, nfs_find_actor, &desc);
+
+ dprintk("%s: returning %p\n", __func__, inode);
+ return inode;
+}
+
/*
* This is our front-end to iget that looks up inodes by file handle
* instead of inode number.
@@ -525,8 +547,14 @@
nfs_fscache_init_inode(inode);
unlock_new_inode(inode);
- } else
- nfs_refresh_inode(inode, fattr);
+ } else {
+ int err = nfs_refresh_inode(inode, fattr);
+ if (err < 0) {
+ iput(inode);
+ inode = ERR_PTR(err);
+ goto out_no_inode;
+ }
+ }
dprintk("NFS: nfs_fhget(%s/%Lu fh_crc=0x%08x ct=%d)\n",
inode->i_sb->s_id,
(unsigned long long)NFS_FILEID(inode),
@@ -1315,9 +1343,9 @@
return 0;
/* Has the inode gone and changed behind our back? */
if ((fattr->valid & NFS_ATTR_FATTR_FILEID) && nfsi->fileid != fattr->fileid)
- return -EIO;
+ return -ESTALE;
if ((fattr->valid & NFS_ATTR_FATTR_TYPE) && (inode->i_mode & S_IFMT) != (fattr->mode & S_IFMT))
- return -EIO;
+ return -ESTALE;
if (!nfs_file_has_buffered_writers(nfsi)) {
/* Verify a few of the more important attributes */
diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h
index 8701d76..dc45641 100644
--- a/fs/nfs/internal.h
+++ b/fs/nfs/internal.h
@@ -11,6 +11,8 @@
#define NFS_MS_MASK (MS_RDONLY|MS_NOSUID|MS_NODEV|MS_NOEXEC|MS_SYNCHRONOUS)
+extern const struct export_operations nfs_export_ops;
+
struct nfs_string;
/* Maximum number of readahead requests
@@ -226,8 +228,8 @@
#endif
/* callback_xdr.c */
-extern struct svc_version nfs4_callback_version1;
-extern struct svc_version nfs4_callback_version4;
+extern const struct svc_version nfs4_callback_version1;
+extern const struct svc_version nfs4_callback_version4;
struct nfs_pageio_descriptor;
/* pagelist.c */
@@ -271,19 +273,19 @@
}
/* nfs2xdr.c */
-extern struct rpc_procinfo nfs_procedures[];
+extern const struct rpc_procinfo nfs_procedures[];
extern int nfs2_decode_dirent(struct xdr_stream *,
- struct nfs_entry *, int);
+ struct nfs_entry *, bool);
/* nfs3xdr.c */
-extern struct rpc_procinfo nfs3_procedures[];
+extern const struct rpc_procinfo nfs3_procedures[];
extern int nfs3_decode_dirent(struct xdr_stream *,
- struct nfs_entry *, int);
+ struct nfs_entry *, bool);
/* nfs4xdr.c */
#if IS_ENABLED(CONFIG_NFS_V4)
extern int nfs4_decode_dirent(struct xdr_stream *,
- struct nfs_entry *, int);
+ struct nfs_entry *, bool);
#endif
#ifdef CONFIG_NFS_V4_1
extern const u32 nfs41_maxread_overhead;
@@ -293,7 +295,7 @@
/* nfs4proc.c */
#if IS_ENABLED(CONFIG_NFS_V4)
-extern struct rpc_procinfo nfs4_procedures[];
+extern const struct rpc_procinfo nfs4_procedures[];
#endif
#ifdef CONFIG_NFS_V4_SECURITY_LABEL
diff --git a/fs/nfs/mount_clnt.c b/fs/nfs/mount_clnt.c
index 09b1900..60bad88 100644
--- a/fs/nfs/mount_clnt.c
+++ b/fs/nfs/mount_clnt.c
@@ -304,7 +304,7 @@
}
static void mnt_xdr_enc_dirpath(struct rpc_rqst *req, struct xdr_stream *xdr,
- const char *dirpath)
+ const void *dirpath)
{
encode_mntdirpath(xdr, dirpath);
}
@@ -357,8 +357,9 @@
static int mnt_xdr_dec_mountres(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct mountres *res)
+ void *data)
{
+ struct mountres *res = data;
int status;
status = decode_status(xdr, res);
@@ -449,8 +450,9 @@
static int mnt_xdr_dec_mountres3(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct mountres *res)
+ void *data)
{
+ struct mountres *res = data;
int status;
status = decode_fhs_status(xdr, res);
@@ -464,11 +466,11 @@
return decode_auth_flavors(xdr, res);
}
-static struct rpc_procinfo mnt_procedures[] = {
+static const struct rpc_procinfo mnt_procedures[] = {
[MOUNTPROC_MNT] = {
.p_proc = MOUNTPROC_MNT,
- .p_encode = (kxdreproc_t)mnt_xdr_enc_dirpath,
- .p_decode = (kxdrdproc_t)mnt_xdr_dec_mountres,
+ .p_encode = mnt_xdr_enc_dirpath,
+ .p_decode = mnt_xdr_dec_mountres,
.p_arglen = MNT_enc_dirpath_sz,
.p_replen = MNT_dec_mountres_sz,
.p_statidx = MOUNTPROC_MNT,
@@ -476,18 +478,18 @@
},
[MOUNTPROC_UMNT] = {
.p_proc = MOUNTPROC_UMNT,
- .p_encode = (kxdreproc_t)mnt_xdr_enc_dirpath,
+ .p_encode = mnt_xdr_enc_dirpath,
.p_arglen = MNT_enc_dirpath_sz,
.p_statidx = MOUNTPROC_UMNT,
.p_name = "UMOUNT",
},
};
-static struct rpc_procinfo mnt3_procedures[] = {
+static const struct rpc_procinfo mnt3_procedures[] = {
[MOUNTPROC3_MNT] = {
.p_proc = MOUNTPROC3_MNT,
- .p_encode = (kxdreproc_t)mnt_xdr_enc_dirpath,
- .p_decode = (kxdrdproc_t)mnt_xdr_dec_mountres3,
+ .p_encode = mnt_xdr_enc_dirpath,
+ .p_decode = mnt_xdr_dec_mountres3,
.p_arglen = MNT_enc_dirpath_sz,
.p_replen = MNT_dec_mountres3_sz,
.p_statidx = MOUNTPROC3_MNT,
@@ -495,24 +497,27 @@
},
[MOUNTPROC3_UMNT] = {
.p_proc = MOUNTPROC3_UMNT,
- .p_encode = (kxdreproc_t)mnt_xdr_enc_dirpath,
+ .p_encode = mnt_xdr_enc_dirpath,
.p_arglen = MNT_enc_dirpath_sz,
.p_statidx = MOUNTPROC3_UMNT,
.p_name = "UMOUNT",
},
};
-
+static unsigned int mnt_counts[ARRAY_SIZE(mnt_procedures)];
static const struct rpc_version mnt_version1 = {
.number = 1,
.nrprocs = ARRAY_SIZE(mnt_procedures),
.procs = mnt_procedures,
+ .counts = mnt_counts,
};
+static unsigned int mnt3_counts[ARRAY_SIZE(mnt3_procedures)];
static const struct rpc_version mnt_version3 = {
.number = 3,
.nrprocs = ARRAY_SIZE(mnt3_procedures),
.procs = mnt3_procedures,
+ .counts = mnt3_counts,
};
static const struct rpc_version *mnt_version[] = {
diff --git a/fs/nfs/nfs2xdr.c b/fs/nfs/nfs2xdr.c
index b4e03ed..fe68dab 100644
--- a/fs/nfs/nfs2xdr.c
+++ b/fs/nfs/nfs2xdr.c
@@ -568,8 +568,10 @@
static void nfs2_xdr_enc_fhandle(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nfs_fh *fh)
+ const void *data)
{
+ const struct nfs_fh *fh = data;
+
encode_fhandle(xdr, fh);
}
@@ -583,23 +585,29 @@
*/
static void nfs2_xdr_enc_sattrargs(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nfs_sattrargs *args)
+ const void *data)
{
+ const struct nfs_sattrargs *args = data;
+
encode_fhandle(xdr, args->fh);
encode_sattr(xdr, args->sattr);
}
static void nfs2_xdr_enc_diropargs(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nfs_diropargs *args)
+ const void *data)
{
+ const struct nfs_diropargs *args = data;
+
encode_diropargs(xdr, args->fh, args->name, args->len);
}
static void nfs2_xdr_enc_readlinkargs(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nfs_readlinkargs *args)
+ const void *data)
{
+ const struct nfs_readlinkargs *args = data;
+
encode_fhandle(xdr, args->fh);
prepare_reply_buffer(req, args->pages, args->pgbase,
args->pglen, NFS_readlinkres_sz);
@@ -632,8 +640,10 @@
static void nfs2_xdr_enc_readargs(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nfs_pgio_args *args)
+ const void *data)
{
+ const struct nfs_pgio_args *args = data;
+
encode_readargs(xdr, args);
prepare_reply_buffer(req, args->pages, args->pgbase,
args->count, NFS_readres_sz);
@@ -672,8 +682,10 @@
static void nfs2_xdr_enc_writeargs(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nfs_pgio_args *args)
+ const void *data)
{
+ const struct nfs_pgio_args *args = data;
+
encode_writeargs(xdr, args);
xdr->buf->flags |= XDRBUF_WRITE;
}
@@ -688,16 +700,20 @@
*/
static void nfs2_xdr_enc_createargs(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nfs_createargs *args)
+ const void *data)
{
+ const struct nfs_createargs *args = data;
+
encode_diropargs(xdr, args->fh, args->name, args->len);
encode_sattr(xdr, args->sattr);
}
static void nfs2_xdr_enc_removeargs(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nfs_removeargs *args)
+ const void *data)
{
+ const struct nfs_removeargs *args = data;
+
encode_diropargs(xdr, args->fh, args->name.name, args->name.len);
}
@@ -711,8 +727,9 @@
*/
static void nfs2_xdr_enc_renameargs(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nfs_renameargs *args)
+ const void *data)
{
+ const struct nfs_renameargs *args = data;
const struct qstr *old = args->old_name;
const struct qstr *new = args->new_name;
@@ -730,8 +747,10 @@
*/
static void nfs2_xdr_enc_linkargs(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nfs_linkargs *args)
+ const void *data)
{
+ const struct nfs_linkargs *args = data;
+
encode_fhandle(xdr, args->fromfh);
encode_diropargs(xdr, args->tofh, args->toname, args->tolen);
}
@@ -747,8 +766,10 @@
*/
static void nfs2_xdr_enc_symlinkargs(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nfs_symlinkargs *args)
+ const void *data)
{
+ const struct nfs_symlinkargs *args = data;
+
encode_diropargs(xdr, args->fromfh, args->fromname, args->fromlen);
encode_path(xdr, args->pages, args->pathlen);
encode_sattr(xdr, args->sattr);
@@ -777,8 +798,10 @@
static void nfs2_xdr_enc_readdirargs(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nfs_readdirargs *args)
+ const void *data)
{
+ const struct nfs_readdirargs *args = data;
+
encode_readdirargs(xdr, args);
prepare_reply_buffer(req, args->pages, 0,
args->count, NFS_readdirres_sz);
@@ -809,13 +832,13 @@
}
static int nfs2_xdr_dec_attrstat(struct rpc_rqst *req, struct xdr_stream *xdr,
- struct nfs_fattr *result)
+ void *result)
{
return decode_attrstat(xdr, result, NULL);
}
static int nfs2_xdr_dec_diropres(struct rpc_rqst *req, struct xdr_stream *xdr,
- struct nfs_diropok *result)
+ void *result)
{
return decode_diropres(xdr, result);
}
@@ -860,8 +883,9 @@
* };
*/
static int nfs2_xdr_dec_readres(struct rpc_rqst *req, struct xdr_stream *xdr,
- struct nfs_pgio_res *result)
+ void *data)
{
+ struct nfs_pgio_res *result = data;
enum nfs_stat status;
int error;
@@ -882,8 +906,10 @@
}
static int nfs2_xdr_dec_writeres(struct rpc_rqst *req, struct xdr_stream *xdr,
- struct nfs_pgio_res *result)
+ void *data)
{
+ struct nfs_pgio_res *result = data;
+
/* All NFSv2 writes are "file sync" writes */
result->verf->committed = NFS_FILE_SYNC;
return decode_attrstat(xdr, result->fattr, &result->op_status);
@@ -913,7 +939,7 @@
* };
*/
int nfs2_decode_dirent(struct xdr_stream *xdr, struct nfs_entry *entry,
- int plus)
+ bool plus)
{
__be32 *p;
int error;
@@ -1034,7 +1060,7 @@
}
static int nfs2_xdr_dec_statfsres(struct rpc_rqst *req, struct xdr_stream *xdr,
- struct nfs2_fsstat *result)
+ void *result)
{
enum nfs_stat status;
int error;
@@ -1118,15 +1144,15 @@
#define PROC(proc, argtype, restype, timer) \
[NFSPROC_##proc] = { \
.p_proc = NFSPROC_##proc, \
- .p_encode = (kxdreproc_t)nfs2_xdr_enc_##argtype, \
- .p_decode = (kxdrdproc_t)nfs2_xdr_dec_##restype, \
+ .p_encode = nfs2_xdr_enc_##argtype, \
+ .p_decode = nfs2_xdr_dec_##restype, \
.p_arglen = NFS_##argtype##_sz, \
.p_replen = NFS_##restype##_sz, \
.p_timer = timer, \
.p_statidx = NFSPROC_##proc, \
.p_name = #proc, \
}
-struct rpc_procinfo nfs_procedures[] = {
+const struct rpc_procinfo nfs_procedures[] = {
PROC(GETATTR, fhandle, attrstat, 1),
PROC(SETATTR, sattrargs, attrstat, 0),
PROC(LOOKUP, diropargs, diropres, 2),
@@ -1144,8 +1170,10 @@
PROC(STATFS, fhandle, statfsres, 0),
};
+static unsigned int nfs_version2_counts[ARRAY_SIZE(nfs_procedures)];
const struct rpc_version nfs_version2 = {
.number = 2,
.nrprocs = ARRAY_SIZE(nfs_procedures),
- .procs = nfs_procedures
+ .procs = nfs_procedures,
+ .counts = nfs_version2_counts,
};
diff --git a/fs/nfs/nfs3proc.c b/fs/nfs/nfs3proc.c
index 0c07b56..d1e87ec 100644
--- a/fs/nfs/nfs3proc.c
+++ b/fs/nfs/nfs3proc.c
@@ -220,15 +220,8 @@
status = rpc_call_sync(NFS_CLIENT(inode), &msg, 0);
nfs_refresh_inode(inode, res.fattr);
- if (status == 0) {
- entry->mask = 0;
- if (res.access & NFS3_ACCESS_READ)
- entry->mask |= MAY_READ;
- if (res.access & (NFS3_ACCESS_MODIFY | NFS3_ACCESS_EXTEND | NFS3_ACCESS_DELETE))
- entry->mask |= MAY_WRITE;
- if (res.access & (NFS3_ACCESS_LOOKUP|NFS3_ACCESS_EXECUTE))
- entry->mask |= MAY_EXEC;
- }
+ if (status == 0)
+ nfs_access_set_mask(entry, res.access);
nfs_free_fattr(res.fattr);
out:
dprintk("NFS reply access: %d\n", status);
@@ -621,7 +614,7 @@
*/
static int
nfs3_proc_readdir(struct dentry *dentry, struct rpc_cred *cred,
- u64 cookie, struct page **pages, unsigned int count, int plus)
+ u64 cookie, struct page **pages, unsigned int count, bool plus)
{
struct inode *dir = d_inode(dentry);
__be32 *verf = NFS_I(dir)->cookieverf;
diff --git a/fs/nfs/nfs3xdr.c b/fs/nfs/nfs3xdr.c
index 267126d..e82c9e5 100644
--- a/fs/nfs/nfs3xdr.c
+++ b/fs/nfs/nfs3xdr.c
@@ -846,8 +846,10 @@
*/
static void nfs3_xdr_enc_getattr3args(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nfs_fh *fh)
+ const void *data)
{
+ const struct nfs_fh *fh = data;
+
encode_nfs_fh3(xdr, fh);
}
@@ -884,8 +886,9 @@
static void nfs3_xdr_enc_setattr3args(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nfs3_sattrargs *args)
+ const void *data)
{
+ const struct nfs3_sattrargs *args = data;
encode_nfs_fh3(xdr, args->fh);
encode_sattr3(xdr, args->sattr);
encode_sattrguard3(xdr, args);
@@ -900,8 +903,10 @@
*/
static void nfs3_xdr_enc_lookup3args(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nfs3_diropargs *args)
+ const void *data)
{
+ const struct nfs3_diropargs *args = data;
+
encode_diropargs3(xdr, args->fh, args->name, args->len);
}
@@ -922,8 +927,10 @@
static void nfs3_xdr_enc_access3args(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nfs3_accessargs *args)
+ const void *data)
{
+ const struct nfs3_accessargs *args = data;
+
encode_access3args(xdr, args);
}
@@ -936,8 +943,10 @@
*/
static void nfs3_xdr_enc_readlink3args(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nfs3_readlinkargs *args)
+ const void *data)
{
+ const struct nfs3_readlinkargs *args = data;
+
encode_nfs_fh3(xdr, args->fh);
prepare_reply_buffer(req, args->pages, args->pgbase,
args->pglen, NFS3_readlinkres_sz);
@@ -966,8 +975,10 @@
static void nfs3_xdr_enc_read3args(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nfs_pgio_args *args)
+ const void *data)
{
+ const struct nfs_pgio_args *args = data;
+
encode_read3args(xdr, args);
prepare_reply_buffer(req, args->pages, args->pgbase,
args->count, NFS3_readres_sz);
@@ -1008,8 +1019,10 @@
static void nfs3_xdr_enc_write3args(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nfs_pgio_args *args)
+ const void *data)
{
+ const struct nfs_pgio_args *args = data;
+
encode_write3args(xdr, args);
xdr->buf->flags |= XDRBUF_WRITE;
}
@@ -1055,8 +1068,10 @@
static void nfs3_xdr_enc_create3args(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nfs3_createargs *args)
+ const void *data)
{
+ const struct nfs3_createargs *args = data;
+
encode_diropargs3(xdr, args->fh, args->name, args->len);
encode_createhow3(xdr, args);
}
@@ -1071,8 +1086,10 @@
*/
static void nfs3_xdr_enc_mkdir3args(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nfs3_mkdirargs *args)
+ const void *data)
{
+ const struct nfs3_mkdirargs *args = data;
+
encode_diropargs3(xdr, args->fh, args->name, args->len);
encode_sattr3(xdr, args->sattr);
}
@@ -1091,16 +1108,20 @@
* };
*/
static void encode_symlinkdata3(struct xdr_stream *xdr,
- const struct nfs3_symlinkargs *args)
+ const void *data)
{
+ const struct nfs3_symlinkargs *args = data;
+
encode_sattr3(xdr, args->sattr);
encode_nfspath3(xdr, args->pages, args->pathlen);
}
static void nfs3_xdr_enc_symlink3args(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nfs3_symlinkargs *args)
+ const void *data)
{
+ const struct nfs3_symlinkargs *args = data;
+
encode_diropargs3(xdr, args->fromfh, args->fromname, args->fromlen);
encode_symlinkdata3(xdr, args);
xdr->buf->flags |= XDRBUF_WRITE;
@@ -1160,8 +1181,10 @@
static void nfs3_xdr_enc_mknod3args(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nfs3_mknodargs *args)
+ const void *data)
{
+ const struct nfs3_mknodargs *args = data;
+
encode_diropargs3(xdr, args->fh, args->name, args->len);
encode_mknoddata3(xdr, args);
}
@@ -1175,8 +1198,10 @@
*/
static void nfs3_xdr_enc_remove3args(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nfs_removeargs *args)
+ const void *data)
{
+ const struct nfs_removeargs *args = data;
+
encode_diropargs3(xdr, args->fh, args->name.name, args->name.len);
}
@@ -1190,8 +1215,9 @@
*/
static void nfs3_xdr_enc_rename3args(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nfs_renameargs *args)
+ const void *data)
{
+ const struct nfs_renameargs *args = data;
const struct qstr *old = args->old_name;
const struct qstr *new = args->new_name;
@@ -1209,8 +1235,10 @@
*/
static void nfs3_xdr_enc_link3args(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nfs3_linkargs *args)
+ const void *data)
{
+ const struct nfs3_linkargs *args = data;
+
encode_nfs_fh3(xdr, args->fromfh);
encode_diropargs3(xdr, args->tofh, args->toname, args->tolen);
}
@@ -1240,8 +1268,10 @@
static void nfs3_xdr_enc_readdir3args(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nfs3_readdirargs *args)
+ const void *data)
{
+ const struct nfs3_readdirargs *args = data;
+
encode_readdir3args(xdr, args);
prepare_reply_buffer(req, args->pages, 0,
args->count, NFS3_readdirres_sz);
@@ -1280,8 +1310,10 @@
static void nfs3_xdr_enc_readdirplus3args(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nfs3_readdirargs *args)
+ const void *data)
{
+ const struct nfs3_readdirargs *args = data;
+
encode_readdirplus3args(xdr, args);
prepare_reply_buffer(req, args->pages, 0,
args->count, NFS3_readdirres_sz);
@@ -1310,8 +1342,10 @@
static void nfs3_xdr_enc_commit3args(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nfs_commitargs *args)
+ const void *data)
{
+ const struct nfs_commitargs *args = data;
+
encode_commit3args(xdr, args);
}
@@ -1319,8 +1353,10 @@
static void nfs3_xdr_enc_getacl3args(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nfs3_getaclargs *args)
+ const void *data)
{
+ const struct nfs3_getaclargs *args = data;
+
encode_nfs_fh3(xdr, args->fh);
encode_uint32(xdr, args->mask);
if (args->mask & (NFS_ACL | NFS_DFACL))
@@ -1331,8 +1367,9 @@
static void nfs3_xdr_enc_setacl3args(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nfs3_setaclargs *args)
+ const void *data)
{
+ const struct nfs3_setaclargs *args = data;
unsigned int base;
int error;
@@ -1382,7 +1419,7 @@
*/
static int nfs3_xdr_dec_getattr3res(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs_fattr *result)
+ void *result)
{
enum nfs_stat status;
int error;
@@ -1419,7 +1456,7 @@
*/
static int nfs3_xdr_dec_setattr3res(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs_fattr *result)
+ void *result)
{
enum nfs_stat status;
int error;
@@ -1460,8 +1497,9 @@
*/
static int nfs3_xdr_dec_lookup3res(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs3_diropres *result)
+ void *data)
{
+ struct nfs3_diropres *result = data;
enum nfs_stat status;
int error;
@@ -1507,8 +1545,9 @@
*/
static int nfs3_xdr_dec_access3res(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs3_accessres *result)
+ void *data)
{
+ struct nfs3_accessres *result = data;
enum nfs_stat status;
int error;
@@ -1548,7 +1587,7 @@
*/
static int nfs3_xdr_dec_readlink3res(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs_fattr *result)
+ void *result)
{
enum nfs_stat status;
int error;
@@ -1626,8 +1665,9 @@
}
static int nfs3_xdr_dec_read3res(struct rpc_rqst *req, struct xdr_stream *xdr,
- struct nfs_pgio_res *result)
+ void *data)
{
+ struct nfs_pgio_res *result = data;
enum nfs_stat status;
int error;
@@ -1699,8 +1739,9 @@
}
static int nfs3_xdr_dec_write3res(struct rpc_rqst *req, struct xdr_stream *xdr,
- struct nfs_pgio_res *result)
+ void *data)
{
+ struct nfs_pgio_res *result = data;
enum nfs_stat status;
int error;
@@ -1764,8 +1805,9 @@
static int nfs3_xdr_dec_create3res(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs3_diropres *result)
+ void *data)
{
+ struct nfs3_diropres *result = data;
enum nfs_stat status;
int error;
@@ -1804,8 +1846,9 @@
*/
static int nfs3_xdr_dec_remove3res(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs_removeres *result)
+ void *data)
{
+ struct nfs_removeres *result = data;
enum nfs_stat status;
int error;
@@ -1845,8 +1888,9 @@
*/
static int nfs3_xdr_dec_rename3res(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs_renameres *result)
+ void *data)
{
+ struct nfs_renameres *result = data;
enum nfs_stat status;
int error;
@@ -1888,8 +1932,9 @@
* };
*/
static int nfs3_xdr_dec_link3res(struct rpc_rqst *req, struct xdr_stream *xdr,
- struct nfs3_linkres *result)
+ void *data)
{
+ struct nfs3_linkres *result = data;
enum nfs_stat status;
int error;
@@ -1946,7 +1991,7 @@
* };
*/
int nfs3_decode_dirent(struct xdr_stream *xdr, struct nfs_entry *entry,
- int plus)
+ bool plus)
{
struct nfs_entry old = *entry;
__be32 *p;
@@ -2072,8 +2117,9 @@
static int nfs3_xdr_dec_readdir3res(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs3_readdirres *result)
+ void *data)
{
+ struct nfs3_readdirres *result = data;
enum nfs_stat status;
int error;
@@ -2140,8 +2186,9 @@
static int nfs3_xdr_dec_fsstat3res(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs_fsstat *result)
+ void *data)
{
+ struct nfs_fsstat *result = data;
enum nfs_stat status;
int error;
@@ -2216,8 +2263,9 @@
static int nfs3_xdr_dec_fsinfo3res(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs_fsinfo *result)
+ void *data)
{
+ struct nfs_fsinfo *result = data;
enum nfs_stat status;
int error;
@@ -2279,8 +2327,9 @@
static int nfs3_xdr_dec_pathconf3res(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs_pathconf *result)
+ void *data)
{
+ struct nfs_pathconf *result = data;
enum nfs_stat status;
int error;
@@ -2320,8 +2369,9 @@
*/
static int nfs3_xdr_dec_commit3res(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs_commitres *result)
+ void *data)
{
+ struct nfs_commitres *result = data;
enum nfs_stat status;
int error;
@@ -2389,7 +2439,7 @@
static int nfs3_xdr_dec_getacl3res(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs3_getaclres *result)
+ void *result)
{
enum nfs_stat status;
int error;
@@ -2408,7 +2458,7 @@
static int nfs3_xdr_dec_setacl3res(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs_fattr *result)
+ void *result)
{
enum nfs_stat status;
int error;
@@ -2495,8 +2545,8 @@
#define PROC(proc, argtype, restype, timer) \
[NFS3PROC_##proc] = { \
.p_proc = NFS3PROC_##proc, \
- .p_encode = (kxdreproc_t)nfs3_xdr_enc_##argtype##3args, \
- .p_decode = (kxdrdproc_t)nfs3_xdr_dec_##restype##3res, \
+ .p_encode = nfs3_xdr_enc_##argtype##3args, \
+ .p_decode = nfs3_xdr_dec_##restype##3res, \
.p_arglen = NFS3_##argtype##args_sz, \
.p_replen = NFS3_##restype##res_sz, \
.p_timer = timer, \
@@ -2504,7 +2554,7 @@
.p_name = #proc, \
}
-struct rpc_procinfo nfs3_procedures[] = {
+const struct rpc_procinfo nfs3_procedures[] = {
PROC(GETATTR, getattr, getattr, 1),
PROC(SETATTR, setattr, setattr, 0),
PROC(LOOKUP, lookup, lookup, 2),
@@ -2528,18 +2578,20 @@
PROC(COMMIT, commit, commit, 5),
};
+static unsigned int nfs_version3_counts[ARRAY_SIZE(nfs3_procedures)];
const struct rpc_version nfs_version3 = {
.number = 3,
.nrprocs = ARRAY_SIZE(nfs3_procedures),
- .procs = nfs3_procedures
+ .procs = nfs3_procedures,
+ .counts = nfs_version3_counts,
};
#ifdef CONFIG_NFS_V3_ACL
-static struct rpc_procinfo nfs3_acl_procedures[] = {
+static const struct rpc_procinfo nfs3_acl_procedures[] = {
[ACLPROC3_GETACL] = {
.p_proc = ACLPROC3_GETACL,
- .p_encode = (kxdreproc_t)nfs3_xdr_enc_getacl3args,
- .p_decode = (kxdrdproc_t)nfs3_xdr_dec_getacl3res,
+ .p_encode = nfs3_xdr_enc_getacl3args,
+ .p_decode = nfs3_xdr_dec_getacl3res,
.p_arglen = ACL3_getaclargs_sz,
.p_replen = ACL3_getaclres_sz,
.p_timer = 1,
@@ -2547,8 +2599,8 @@
},
[ACLPROC3_SETACL] = {
.p_proc = ACLPROC3_SETACL,
- .p_encode = (kxdreproc_t)nfs3_xdr_enc_setacl3args,
- .p_decode = (kxdrdproc_t)nfs3_xdr_dec_setacl3res,
+ .p_encode = nfs3_xdr_enc_setacl3args,
+ .p_decode = nfs3_xdr_dec_setacl3res,
.p_arglen = ACL3_setaclargs_sz,
.p_replen = ACL3_setaclres_sz,
.p_timer = 0,
@@ -2556,10 +2608,11 @@
},
};
+static unsigned int nfs3_acl_counts[ARRAY_SIZE(nfs3_acl_procedures)];
const struct rpc_version nfsacl_version3 = {
.number = 3,
- .nrprocs = sizeof(nfs3_acl_procedures)/
- sizeof(nfs3_acl_procedures[0]),
+ .nrprocs = ARRAY_SIZE(nfs3_acl_procedures),
.procs = nfs3_acl_procedures,
+ .counts = nfs3_acl_counts,
};
#endif /* CONFIG_NFS_V3_ACL */
diff --git a/fs/nfs/nfs42proc.c b/fs/nfs/nfs42proc.c
index 319a47d..6c2db51 100644
--- a/fs/nfs/nfs42proc.c
+++ b/fs/nfs/nfs42proc.c
@@ -146,7 +146,7 @@
loff_t pos_src = args->src_pos;
loff_t pos_dst = args->dst_pos;
size_t count = args->count;
- int status;
+ ssize_t status;
status = nfs4_set_rw_stateid(&args->src_stateid, src_lock->open_context,
src_lock, FMODE_READ);
diff --git a/fs/nfs/nfs42xdr.c b/fs/nfs/nfs42xdr.c
index 528362f..5ee1b0f 100644
--- a/fs/nfs/nfs42xdr.c
+++ b/fs/nfs/nfs42xdr.c
@@ -112,7 +112,7 @@
decode_getattr_maxsz)
static void encode_fallocate(struct xdr_stream *xdr,
- struct nfs42_falloc_args *args)
+ const struct nfs42_falloc_args *args)
{
encode_nfs4_stateid(xdr, &args->falloc_stateid);
encode_uint64(xdr, args->falloc_offset);
@@ -120,7 +120,7 @@
}
static void encode_allocate(struct xdr_stream *xdr,
- struct nfs42_falloc_args *args,
+ const struct nfs42_falloc_args *args,
struct compound_hdr *hdr)
{
encode_op_hdr(xdr, OP_ALLOCATE, decode_allocate_maxsz, hdr);
@@ -128,7 +128,7 @@
}
static void encode_copy(struct xdr_stream *xdr,
- struct nfs42_copy_args *args,
+ const struct nfs42_copy_args *args,
struct compound_hdr *hdr)
{
encode_op_hdr(xdr, OP_COPY, decode_copy_maxsz, hdr);
@@ -145,7 +145,7 @@
}
static void encode_deallocate(struct xdr_stream *xdr,
- struct nfs42_falloc_args *args,
+ const struct nfs42_falloc_args *args,
struct compound_hdr *hdr)
{
encode_op_hdr(xdr, OP_DEALLOCATE, decode_deallocate_maxsz, hdr);
@@ -153,7 +153,7 @@
}
static void encode_seek(struct xdr_stream *xdr,
- struct nfs42_seek_args *args,
+ const struct nfs42_seek_args *args,
struct compound_hdr *hdr)
{
encode_op_hdr(xdr, OP_SEEK, decode_seek_maxsz, hdr);
@@ -163,7 +163,7 @@
}
static void encode_layoutstats(struct xdr_stream *xdr,
- struct nfs42_layoutstat_args *args,
+ const struct nfs42_layoutstat_args *args,
struct nfs42_layoutstat_devinfo *devinfo,
struct compound_hdr *hdr)
{
@@ -191,7 +191,7 @@
}
static void encode_clone(struct xdr_stream *xdr,
- struct nfs42_clone_args *args,
+ const struct nfs42_clone_args *args,
struct compound_hdr *hdr)
{
__be32 *p;
@@ -210,8 +210,9 @@
*/
static void nfs4_xdr_enc_allocate(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs42_falloc_args *args)
+ const void *data)
{
+ const struct nfs42_falloc_args *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -225,7 +226,7 @@
}
static void encode_copy_commit(struct xdr_stream *xdr,
- struct nfs42_copy_args *args,
+ const struct nfs42_copy_args *args,
struct compound_hdr *hdr)
{
__be32 *p;
@@ -241,8 +242,9 @@
*/
static void nfs4_xdr_enc_copy(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs42_copy_args *args)
+ const void *data)
{
+ const struct nfs42_copy_args *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -262,8 +264,9 @@
*/
static void nfs4_xdr_enc_deallocate(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs42_falloc_args *args)
+ const void *data)
{
+ const struct nfs42_falloc_args *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -281,8 +284,9 @@
*/
static void nfs4_xdr_enc_seek(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs42_seek_args *args)
+ const void *data)
{
+ const struct nfs42_seek_args *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -299,8 +303,9 @@
*/
static void nfs4_xdr_enc_layoutstats(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs42_layoutstat_args *args)
+ const void *data)
{
+ const struct nfs42_layoutstat_args *args = data;
int i;
struct compound_hdr hdr = {
@@ -321,8 +326,9 @@
*/
static void nfs4_xdr_enc_clone(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs42_clone_args *args)
+ const void *data)
{
+ const struct nfs42_clone_args *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -448,8 +454,9 @@
*/
static int nfs4_xdr_dec_allocate(struct rpc_rqst *rqstp,
struct xdr_stream *xdr,
- struct nfs42_falloc_res *res)
+ void *data)
{
+ struct nfs42_falloc_res *res = data;
struct compound_hdr hdr;
int status;
@@ -475,8 +482,9 @@
*/
static int nfs4_xdr_dec_copy(struct rpc_rqst *rqstp,
struct xdr_stream *xdr,
- struct nfs42_copy_res *res)
+ void *data)
{
+ struct nfs42_copy_res *res = data;
struct compound_hdr hdr;
int status;
@@ -508,8 +516,9 @@
*/
static int nfs4_xdr_dec_deallocate(struct rpc_rqst *rqstp,
struct xdr_stream *xdr,
- struct nfs42_falloc_res *res)
+ void *data)
{
+ struct nfs42_falloc_res *res = data;
struct compound_hdr hdr;
int status;
@@ -535,8 +544,9 @@
*/
static int nfs4_xdr_dec_seek(struct rpc_rqst *rqstp,
struct xdr_stream *xdr,
- struct nfs42_seek_res *res)
+ void *data)
{
+ struct nfs42_seek_res *res = data;
struct compound_hdr hdr;
int status;
@@ -559,8 +569,9 @@
*/
static int nfs4_xdr_dec_layoutstats(struct rpc_rqst *rqstp,
struct xdr_stream *xdr,
- struct nfs42_layoutstat_res *res)
+ void *data)
{
+ struct nfs42_layoutstat_res *res = data;
struct compound_hdr hdr;
int status, i;
@@ -589,8 +600,9 @@
*/
static int nfs4_xdr_dec_clone(struct rpc_rqst *rqstp,
struct xdr_stream *xdr,
- struct nfs42_clone_res *res)
+ void *data)
{
+ struct nfs42_clone_res *res = data;
struct compound_hdr hdr;
int status;
diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h
index af285cc..40bd05f 100644
--- a/fs/nfs/nfs4_fs.h
+++ b/fs/nfs/nfs4_fs.h
@@ -493,13 +493,13 @@
#endif
/* nfs4xdr.c */
-extern struct rpc_procinfo nfs4_procedures[];
+extern const struct rpc_procinfo nfs4_procedures[];
struct nfs4_mount_data;
/* callback_xdr.c */
-extern struct svc_version nfs4_callback_version1;
-extern struct svc_version nfs4_callback_version4;
+extern const struct svc_version nfs4_callback_version1;
+extern const struct svc_version nfs4_callback_version4;
static inline void nfs4_stateid_copy(nfs4_stateid *dst, const nfs4_stateid *src)
{
diff --git a/fs/nfs/nfs4client.c b/fs/nfs/nfs4client.c
index 66776f0..e9bea90 100644
--- a/fs/nfs/nfs4client.c
+++ b/fs/nfs/nfs4client.c
@@ -414,6 +414,7 @@
if (clp != old)
clp->cl_preserve_clid = true;
nfs_put_client(clp);
+ clear_bit(NFS_CS_TSM_POSSIBLE, &clp->cl_flags);
return old;
error:
@@ -659,9 +660,6 @@
if (!nfs4_check_server_scope(clp->cl_serverscope, res->server_scope))
goto out_err;
- /* Session trunking passed, add the xprt */
- rpc_clnt_xprt_switch_add_xprt(clp->cl_rpcclient, xprt);
-
pr_info("NFS: %s: Session trunking succeeded for %s\n",
clp->cl_hostname,
xprt->address_strings[RPC_DISPLAY_ADDR]);
@@ -852,6 +850,8 @@
set_bit(NFS_CS_NORESVPORT, &cl_init.init_flags);
if (server->options & NFS_OPTION_MIGRATION)
set_bit(NFS_CS_MIGRATION, &cl_init.init_flags);
+ if (test_bit(NFS_MIG_TSM_POSSIBLE, &server->mig_status))
+ set_bit(NFS_CS_TSM_POSSIBLE, &cl_init.init_flags);
/* Allocate or find a client reference we can use */
clp = nfs_get_client(&cl_init);
@@ -1212,9 +1212,11 @@
return -EAFNOSUPPORT;
nfs_server_remove_lists(server);
+ set_bit(NFS_MIG_TSM_POSSIBLE, &server->mig_status);
error = nfs4_set_client(server, hostname, sap, salen, buf,
clp->cl_proto, clnt->cl_timeout,
clp->cl_minorversion, net);
+ clear_bit(NFS_MIG_TSM_POSSIBLE, &server->mig_status);
nfs_put_client(clp);
if (error != 0) {
nfs_server_insert_lists(server);
diff --git a/fs/nfs/nfs4idmap.c b/fs/nfs/nfs4idmap.c
index 835c163..dd5d27d 100644
--- a/fs/nfs/nfs4idmap.c
+++ b/fs/nfs/nfs4idmap.c
@@ -364,7 +364,8 @@
ret = -EINVAL;
} else {
ret = kstrtol(id_str, 10, &id_long);
- *id = (__u32)id_long;
+ if (!ret)
+ *id = (__u32)id_long;
}
return ret;
}
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 98b0b66..ffd2e71 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -275,6 +275,7 @@
static void nfs4_setup_readdir(u64 cookie, __be32 *verifier, struct dentry *dentry,
struct nfs4_readdir_arg *readdir)
{
+ unsigned int attrs = FATTR4_WORD0_FILEID | FATTR4_WORD0_TYPE;
__be32 *start, *p;
if (cookie > 2) {
@@ -305,8 +306,9 @@
memcpy(p, ".\0\0\0", 4); /* entry */
p++;
*p++ = xdr_one; /* bitmap length */
- *p++ = htonl(FATTR4_WORD0_FILEID); /* bitmap */
- *p++ = htonl(8); /* attribute buffer length */
+ *p++ = htonl(attrs); /* bitmap */
+ *p++ = htonl(12); /* attribute buffer length */
+ *p++ = htonl(NF4DIR);
p = xdr_encode_hyper(p, NFS_FILEID(d_inode(dentry)));
}
@@ -317,8 +319,9 @@
memcpy(p, "..\0\0", 4); /* entry */
p++;
*p++ = xdr_one; /* bitmap length */
- *p++ = htonl(FATTR4_WORD0_FILEID); /* bitmap */
- *p++ = htonl(8); /* attribute buffer length */
+ *p++ = htonl(attrs); /* bitmap */
+ *p++ = htonl(12); /* attribute buffer length */
+ *p++ = htonl(NF4DIR);
p = xdr_encode_hyper(p, NFS_FILEID(d_inode(dentry->d_parent)));
readdir->pgbase = (char *)p - (char *)start;
@@ -1034,11 +1037,11 @@
struct nfs4_state *state;
struct iattr attrs;
unsigned long timestamp;
- unsigned int rpc_done : 1;
- unsigned int file_created : 1;
- unsigned int is_recover : 1;
+ bool rpc_done;
+ bool file_created;
+ bool is_recover;
+ bool cancelled;
int rpc_status;
- int cancelled;
};
static bool nfs4_clear_cap_atomic_open_v1(struct nfs_server *server,
@@ -1962,7 +1965,7 @@
nfs4_stateid_copy(&data->o_res.stateid, &data->c_res.stateid);
nfs_confirm_seqid(&data->owner->so_seqid, 0);
renew_lease(data->o_res.server, data->timestamp);
- data->rpc_done = 1;
+ data->rpc_done = true;
}
}
@@ -1972,7 +1975,7 @@
struct nfs4_state *state = NULL;
/* If this request hasn't been cancelled, do nothing */
- if (data->cancelled == 0)
+ if (!data->cancelled)
goto out_free;
/* In case of error, no cleanup! */
if (!data->rpc_done)
@@ -2015,7 +2018,7 @@
nfs4_init_sequence(&data->c_arg.seq_args, &data->c_res.seq_res, 1);
kref_get(&data->kref);
- data->rpc_done = 0;
+ data->rpc_done = false;
data->rpc_status = 0;
data->timestamp = jiffies;
if (data->is_recover)
@@ -2025,7 +2028,7 @@
return PTR_ERR(task);
status = rpc_wait_for_completion_task(task);
if (status != 0) {
- data->cancelled = 1;
+ data->cancelled = true;
smp_wmb();
} else
status = data->rpc_status;
@@ -2124,7 +2127,7 @@
if (!(data->o_res.rflags & NFS4_OPEN_RESULT_CONFIRM))
nfs_confirm_seqid(&data->owner->so_seqid, 0);
}
- data->rpc_done = 1;
+ data->rpc_done = true;
}
static void nfs4_open_release(void *calldata)
@@ -2133,7 +2136,7 @@
struct nfs4_state *state = NULL;
/* If this request hasn't been cancelled, do nothing */
- if (data->cancelled == 0)
+ if (!data->cancelled)
goto out_free;
/* In case of error, no cleanup! */
if (data->rpc_status != 0 || !data->rpc_done)
@@ -2179,20 +2182,20 @@
nfs4_init_sequence(&o_arg->seq_args, &o_res->seq_res, 1);
kref_get(&data->kref);
- data->rpc_done = 0;
+ data->rpc_done = false;
data->rpc_status = 0;
- data->cancelled = 0;
- data->is_recover = 0;
+ data->cancelled = false;
+ data->is_recover = false;
if (isrecover) {
nfs4_set_sequence_privileged(&o_arg->seq_args);
- data->is_recover = 1;
+ data->is_recover = true;
}
task = rpc_run_task(&task_setup_data);
if (IS_ERR(task))
return PTR_ERR(task);
status = rpc_wait_for_completion_task(task);
if (status != 0) {
- data->cancelled = 1;
+ data->cancelled = true;
smp_wmb();
} else
status = data->rpc_status;
@@ -2233,7 +2236,7 @@
int openflags)
{
struct nfs_access_entry cache;
- u32 mask;
+ u32 mask, flags;
/* access call failed or for some reason the server doesn't
* support any access modes -- defer access call until later */
@@ -2247,16 +2250,20 @@
*/
if (openflags & __FMODE_EXEC) {
/* ONLY check for exec rights */
- mask = MAY_EXEC;
+ if (S_ISDIR(state->inode->i_mode))
+ mask = NFS4_ACCESS_LOOKUP;
+ else
+ mask = NFS4_ACCESS_EXECUTE;
} else if ((fmode & FMODE_READ) && !opendata->file_created)
- mask = MAY_READ;
+ mask = NFS4_ACCESS_READ;
cache.cred = cred;
cache.jiffies = jiffies;
nfs_access_set_mask(&cache, opendata->o_res.access_result);
nfs_access_add_cache(state->inode, &cache);
- if ((mask & ~cache.mask & (MAY_READ | MAY_EXEC)) == 0)
+ flags = NFS4_ACCESS_READ | NFS4_ACCESS_EXECUTE | NFS4_ACCESS_LOOKUP;
+ if ((mask & ~cache.mask & flags) == 0)
return 0;
return -EACCES;
@@ -2287,9 +2294,9 @@
if (o_arg->open_flags & O_CREAT) {
if (o_arg->open_flags & O_EXCL)
- data->file_created = 1;
+ data->file_created = true;
else if (o_res->cinfo.before != o_res->cinfo.after)
- data->file_created = 1;
+ data->file_created = true;
if (data->file_created || dir->i_version != o_res->cinfo.after)
update_changeattr(dir, &o_res->cinfo,
o_res->f_attr->time_start);
@@ -3803,6 +3810,54 @@
return (client == NFS_CLIENT(dir)) ? rpc_clone_client(client) : client;
}
+static int _nfs4_proc_lookupp(struct inode *inode,
+ struct nfs_fh *fhandle, struct nfs_fattr *fattr,
+ struct nfs4_label *label)
+{
+ struct rpc_clnt *clnt = NFS_CLIENT(inode);
+ struct nfs_server *server = NFS_SERVER(inode);
+ int status;
+ struct nfs4_lookupp_arg args = {
+ .bitmask = server->attr_bitmask,
+ .fh = NFS_FH(inode),
+ };
+ struct nfs4_lookupp_res res = {
+ .server = server,
+ .fattr = fattr,
+ .label = label,
+ .fh = fhandle,
+ };
+ struct rpc_message msg = {
+ .rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_LOOKUPP],
+ .rpc_argp = &args,
+ .rpc_resp = &res,
+ };
+
+ args.bitmask = nfs4_bitmask(server, label);
+
+ nfs_fattr_init(fattr);
+
+ dprintk("NFS call lookupp ino=0x%lx\n", inode->i_ino);
+ status = nfs4_call_sync(clnt, server, &msg, &args.seq_args,
+ &res.seq_res, 0);
+ dprintk("NFS reply lookupp: %d\n", status);
+ return status;
+}
+
+static int nfs4_proc_lookupp(struct inode *inode, struct nfs_fh *fhandle,
+ struct nfs_fattr *fattr, struct nfs4_label *label)
+{
+ struct nfs4_exception exception = { };
+ int err;
+ do {
+ err = _nfs4_proc_lookupp(inode, fhandle, fattr, label);
+ trace_nfs4_lookupp(inode, err);
+ err = nfs4_handle_exception(NFS_SERVER(inode), err,
+ &exception);
+ } while (exception.retry);
+ return err;
+}
+
static int _nfs4_proc_access(struct inode *inode, struct nfs_access_entry *entry)
{
struct nfs_server *server = NFS_SERVER(inode);
@@ -4273,7 +4328,7 @@
}
static int _nfs4_proc_readdir(struct dentry *dentry, struct rpc_cred *cred,
- u64 cookie, struct page **pages, unsigned int count, int plus)
+ u64 cookie, struct page **pages, unsigned int count, bool plus)
{
struct inode *dir = d_inode(dentry);
struct nfs4_readdir_arg args = {
@@ -4311,7 +4366,7 @@
}
static int nfs4_proc_readdir(struct dentry *dentry, struct rpc_cred *cred,
- u64 cookie, struct page **pages, unsigned int count, int plus)
+ u64 cookie, struct page **pages, unsigned int count, bool plus)
{
struct nfs4_exception exception = { };
int err;
@@ -6135,7 +6190,7 @@
dprintk("%s: begin!\n", __func__);
nfs_free_seqid(data->arg.open_seqid);
- if (data->cancelled != 0) {
+ if (data->cancelled) {
struct rpc_task *task;
task = nfs4_do_unlck(&data->fl, data->ctx, data->lsp,
data->arg.lock_seqid);
@@ -6218,7 +6273,7 @@
nfs4_handle_setlk_error(data->server, data->lsp,
data->arg.new_lock_owner, ret);
} else
- data->cancelled = 1;
+ data->cancelled = true;
rpc_put_task(task);
dprintk("%s: done, ret = %d!\n", __func__, ret);
trace_nfs4_set_lock(fl, state, &data->res.stateid, cmd, ret);
@@ -6441,7 +6496,7 @@
set_current_state(TASK_INTERRUPTIBLE);
spin_unlock_irqrestore(&q->lock, flags);
- freezable_schedule_timeout_interruptible(NFS4_LOCK_MAXTIMEOUT);
+ freezable_schedule_timeout(NFS4_LOCK_MAXTIMEOUT);
}
finish_wait(q, &wait);
@@ -7376,12 +7431,11 @@
if (status == 0) {
clp->cl_clientid = cdata->res.clientid;
clp->cl_exchange_flags = cdata->res.flags;
+ clp->cl_seqid = cdata->res.seqid;
/* Client ID is not confirmed */
- if (!(cdata->res.flags & EXCHGID4_FLAG_CONFIRMED_R)) {
+ if (!(cdata->res.flags & EXCHGID4_FLAG_CONFIRMED_R))
clear_bit(NFS4_SESSION_ESTABLISHED,
- &clp->cl_session->session_state);
- clp->cl_seqid = cdata->res.seqid;
- }
+ &clp->cl_session->session_state);
kfree(clp->cl_serverowner);
clp->cl_serverowner = cdata->res.server_owner;
@@ -7407,7 +7461,7 @@
cdata->res.server_scope = NULL;
}
/* Save the EXCHANGE_ID verifier session trunk tests */
- memcpy(clp->cl_confirm.data, cdata->args.verifier->data,
+ memcpy(clp->cl_confirm.data, cdata->args.verifier.data,
sizeof(clp->cl_confirm.data));
}
out:
@@ -7420,10 +7474,6 @@
struct nfs41_exchange_id_data *cdata =
(struct nfs41_exchange_id_data *)data;
- if (cdata->xprt) {
- xprt_put(cdata->xprt);
- rpc_clnt_xprt_switch_put(cdata->args.client->cl_rpcclient);
- }
nfs_put_client(cdata->args.client);
kfree(cdata->res.impl_id);
kfree(cdata->res.server_scope);
@@ -7444,7 +7494,6 @@
static int _nfs4_proc_exchange_id(struct nfs_client *clp, struct rpc_cred *cred,
u32 sp4_how, struct rpc_xprt *xprt)
{
- nfs4_verifier verifier;
struct rpc_message msg = {
.rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_EXCHANGE_ID],
.rpc_cred = cred,
@@ -7453,7 +7502,7 @@
.rpc_client = clp->cl_rpcclient,
.callback_ops = &nfs4_exchange_id_call_ops,
.rpc_message = &msg,
- .flags = RPC_TASK_ASYNC | RPC_TASK_TIMEOUT,
+ .flags = RPC_TASK_TIMEOUT,
};
struct nfs41_exchange_id_data *calldata;
struct rpc_task *task;
@@ -7468,8 +7517,7 @@
return -ENOMEM;
}
- if (!xprt)
- nfs4_init_boot_verifier(clp, &verifier);
+ nfs4_init_boot_verifier(clp, &calldata->args.verifier);
status = nfs4_init_uniform_client_string(clp);
if (status)
@@ -7508,11 +7556,9 @@
if (xprt) {
calldata->xprt = xprt;
task_setup_data.rpc_xprt = xprt;
- task_setup_data.flags =
- RPC_TASK_SOFT|RPC_TASK_SOFTCONN|RPC_TASK_ASYNC;
- calldata->args.verifier = &clp->cl_confirm;
- } else {
- calldata->args.verifier = &verifier;
+ task_setup_data.flags |= RPC_TASK_SOFTCONN;
+ memcpy(calldata->args.verifier.data, clp->cl_confirm.data,
+ sizeof(calldata->args.verifier.data));
}
calldata->args.client = clp;
#ifdef CONFIG_NFS_V4_1_MIGRATION
@@ -7531,12 +7577,7 @@
if (IS_ERR(task))
return PTR_ERR(task);
- if (!xprt) {
- status = rpc_wait_for_completion_task(task);
- if (!status)
- status = calldata->rpc_status;
- } else /* session trunking test */
- status = calldata->rpc_status;
+ status = calldata->rpc_status;
rpc_put_task(task);
out:
@@ -9313,6 +9354,7 @@
.getattr = nfs4_proc_getattr,
.setattr = nfs4_proc_setattr,
.lookup = nfs4_proc_lookup,
+ .lookupp = nfs4_proc_lookupp,
.access = nfs4_proc_access,
.readlink = nfs4_proc_readlink,
.create = nfs4_proc_create,
diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c
index cbf82b0..0378e225 100644
--- a/fs/nfs/nfs4state.c
+++ b/fs/nfs/nfs4state.c
@@ -352,11 +352,17 @@
if (clp != *result)
return 0;
- /* Purge state if the client id was established in a prior instance */
- if (clp->cl_exchange_flags & EXCHGID4_FLAG_CONFIRMED_R)
- set_bit(NFS4CLNT_PURGE_STATE, &clp->cl_state);
- else
- set_bit(NFS4CLNT_LEASE_CONFIRM, &clp->cl_state);
+ /*
+ * Purge state if the client id was established in a prior
+ * instance and the client id could not have arrived on the
+ * server via Transparent State Migration.
+ */
+ if (clp->cl_exchange_flags & EXCHGID4_FLAG_CONFIRMED_R) {
+ if (!test_bit(NFS_CS_TSM_POSSIBLE, &clp->cl_flags))
+ set_bit(NFS4CLNT_PURGE_STATE, &clp->cl_state);
+ else
+ set_bit(NFS4CLNT_LEASE_CONFIRM, &clp->cl_state);
+ }
nfs4_schedule_state_manager(clp);
status = nfs_wait_client_init_complete(clp);
if (status < 0)
diff --git a/fs/nfs/nfs4trace.h b/fs/nfs/nfs4trace.h
index 845d0ea..be1da19 100644
--- a/fs/nfs/nfs4trace.h
+++ b/fs/nfs/nfs4trace.h
@@ -891,6 +891,35 @@
DEFINE_NFS4_LOOKUP_EVENT(nfs4_get_fs_locations);
DEFINE_NFS4_LOOKUP_EVENT(nfs4_secinfo);
+TRACE_EVENT(nfs4_lookupp,
+ TP_PROTO(
+ const struct inode *inode,
+ int error
+ ),
+
+ TP_ARGS(inode, error),
+
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __field(u64, ino)
+ __field(int, error)
+ ),
+
+ TP_fast_assign(
+ __entry->dev = inode->i_sb->s_dev;
+ __entry->ino = NFS_FILEID(inode);
+ __entry->error = error;
+ ),
+
+ TP_printk(
+ "error=%d (%s) inode=%02x:%02x:%llu",
+ __entry->error,
+ show_nfsv4_errors(__entry->error),
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ (unsigned long long)__entry->ino
+ )
+);
+
TRACE_EVENT(nfs4_rename,
TP_PROTO(
const struct inode *olddir,
diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index 3aebfdc..37c8af0 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -159,6 +159,8 @@
(op_decode_hdr_maxsz)
#define encode_lookup_maxsz (op_encode_hdr_maxsz + nfs4_name_maxsz)
#define decode_lookup_maxsz (op_decode_hdr_maxsz)
+#define encode_lookupp_maxsz (op_encode_hdr_maxsz)
+#define decode_lookupp_maxsz (op_decode_hdr_maxsz)
#define encode_share_access_maxsz \
(2)
#define encode_createmode_maxsz (1 + encode_attrs_maxsz + encode_verifier_maxsz)
@@ -618,6 +620,18 @@
decode_lookup_maxsz + \
decode_getattr_maxsz + \
decode_getfh_maxsz)
+#define NFS4_enc_lookupp_sz (compound_encode_hdr_maxsz + \
+ encode_sequence_maxsz + \
+ encode_putfh_maxsz + \
+ encode_lookupp_maxsz + \
+ encode_getattr_maxsz + \
+ encode_getfh_maxsz)
+#define NFS4_dec_lookupp_sz (compound_decode_hdr_maxsz + \
+ decode_sequence_maxsz + \
+ decode_putfh_maxsz + \
+ decode_lookupp_maxsz + \
+ decode_getattr_maxsz + \
+ decode_getfh_maxsz)
#define NFS4_enc_lookup_root_sz (compound_encode_hdr_maxsz + \
encode_sequence_maxsz + \
encode_putrootfh_maxsz + \
@@ -1368,6 +1382,11 @@
encode_string(xdr, name->len, name->name);
}
+static void encode_lookupp(struct xdr_stream *xdr, struct compound_hdr *hdr)
+{
+ encode_op_hdr(xdr, OP_LOOKUPP, decode_lookupp_maxsz, hdr);
+}
+
static void encode_share_access(struct xdr_stream *xdr, u32 share_access)
{
__be32 *p;
@@ -1651,7 +1670,8 @@
}
static void
-encode_setacl(struct xdr_stream *xdr, struct nfs_setaclargs *arg, struct compound_hdr *hdr)
+encode_setacl(struct xdr_stream *xdr, const struct nfs_setaclargs *arg,
+ struct compound_hdr *hdr)
{
__be32 *p;
@@ -1735,7 +1755,7 @@
#if defined(CONFIG_NFS_V4_1)
/* NFSv4.1 operations */
static void encode_bind_conn_to_session(struct xdr_stream *xdr,
- struct nfs41_bind_conn_to_session_args *args,
+ const struct nfs41_bind_conn_to_session_args *args,
struct compound_hdr *hdr)
{
__be32 *p;
@@ -1748,7 +1768,7 @@
*p = (args->use_conn_in_rdma_mode) ? cpu_to_be32(1) : cpu_to_be32(0);
}
-static void encode_op_map(struct xdr_stream *xdr, struct nfs4_op_map *op_map)
+static void encode_op_map(struct xdr_stream *xdr, const struct nfs4_op_map *op_map)
{
unsigned int i;
encode_uint32(xdr, NFS4_OP_MAP_NUM_WORDS);
@@ -1757,7 +1777,7 @@
}
static void encode_exchange_id(struct xdr_stream *xdr,
- struct nfs41_exchange_id_args *args,
+ const struct nfs41_exchange_id_args *args,
struct compound_hdr *hdr)
{
__be32 *p;
@@ -1765,7 +1785,7 @@
int len = 0;
encode_op_hdr(xdr, OP_EXCHANGE_ID, decode_exchange_id_maxsz, hdr);
- encode_nfs4_verifier(xdr, args->verifier);
+ encode_nfs4_verifier(xdr, &args->verifier);
encode_string(xdr, strlen(args->client->cl_owner_id),
args->client->cl_owner_id);
@@ -1809,7 +1829,7 @@
}
static void encode_create_session(struct xdr_stream *xdr,
- struct nfs41_create_session_args *args,
+ const struct nfs41_create_session_args *args,
struct compound_hdr *hdr)
{
__be32 *p;
@@ -1862,7 +1882,7 @@
}
static void encode_destroy_session(struct xdr_stream *xdr,
- struct nfs4_session *session,
+ const struct nfs4_session *session,
struct compound_hdr *hdr)
{
encode_op_hdr(xdr, OP_DESTROY_SESSION, decode_destroy_session_maxsz, hdr);
@@ -1878,7 +1898,7 @@
}
static void encode_reclaim_complete(struct xdr_stream *xdr,
- struct nfs41_reclaim_complete_args *args,
+ const struct nfs41_reclaim_complete_args *args,
struct compound_hdr *hdr)
{
encode_op_hdr(xdr, OP_RECLAIM_COMPLETE, decode_reclaim_complete_maxsz, hdr);
@@ -1974,7 +1994,7 @@
static int
encode_layoutcommit(struct xdr_stream *xdr,
struct inode *inode,
- struct nfs4_layoutcommit_args *args,
+ const struct nfs4_layoutcommit_args *args,
struct compound_hdr *hdr)
{
__be32 *p;
@@ -2044,7 +2064,7 @@
}
static void encode_test_stateid(struct xdr_stream *xdr,
- struct nfs41_test_stateid_args *args,
+ const struct nfs41_test_stateid_args *args,
struct compound_hdr *hdr)
{
encode_op_hdr(xdr, OP_TEST_STATEID, decode_test_stateid_maxsz, hdr);
@@ -2053,7 +2073,7 @@
}
static void encode_free_stateid(struct xdr_stream *xdr,
- struct nfs41_free_stateid_args *args,
+ const struct nfs41_free_stateid_args *args,
struct compound_hdr *hdr)
{
encode_op_hdr(xdr, OP_FREE_STATEID, decode_free_stateid_maxsz, hdr);
@@ -2086,8 +2106,9 @@
* Encode an ACCESS request
*/
static void nfs4_xdr_enc_access(struct rpc_rqst *req, struct xdr_stream *xdr,
- const struct nfs4_accessargs *args)
+ const void *data)
{
+ const struct nfs4_accessargs *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -2104,8 +2125,9 @@
* Encode LOOKUP request
*/
static void nfs4_xdr_enc_lookup(struct rpc_rqst *req, struct xdr_stream *xdr,
- const struct nfs4_lookup_arg *args)
+ const void *data)
{
+ const struct nfs4_lookup_arg *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -2120,12 +2142,33 @@
}
/*
+ * Encode LOOKUPP request
+ */
+static void nfs4_xdr_enc_lookupp(struct rpc_rqst *req, struct xdr_stream *xdr,
+ const void *data)
+{
+ const struct nfs4_lookupp_arg *args = data;
+ struct compound_hdr hdr = {
+ .minorversion = nfs4_xdr_minorversion(&args->seq_args),
+ };
+
+ encode_compound_hdr(xdr, req, &hdr);
+ encode_sequence(xdr, &args->seq_args, &hdr);
+ encode_putfh(xdr, args->fh, &hdr);
+ encode_lookupp(xdr, &hdr);
+ encode_getfh(xdr, &hdr);
+ encode_getfattr(xdr, args->bitmask, &hdr);
+ encode_nops(&hdr);
+}
+
+/*
* Encode LOOKUP_ROOT request
*/
static void nfs4_xdr_enc_lookup_root(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nfs4_lookup_root_arg *args)
+ const void *data)
{
+ const struct nfs4_lookup_root_arg *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -2142,8 +2185,9 @@
* Encode REMOVE request
*/
static void nfs4_xdr_enc_remove(struct rpc_rqst *req, struct xdr_stream *xdr,
- const struct nfs_removeargs *args)
+ const void *data)
{
+ const struct nfs_removeargs *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -2159,8 +2203,9 @@
* Encode RENAME request
*/
static void nfs4_xdr_enc_rename(struct rpc_rqst *req, struct xdr_stream *xdr,
- const struct nfs_renameargs *args)
+ const void *data)
{
+ const struct nfs_renameargs *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -2178,8 +2223,9 @@
* Encode LINK request
*/
static void nfs4_xdr_enc_link(struct rpc_rqst *req, struct xdr_stream *xdr,
- const struct nfs4_link_arg *args)
+ const void *data)
{
+ const struct nfs4_link_arg *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -2199,8 +2245,9 @@
* Encode CREATE request
*/
static void nfs4_xdr_enc_create(struct rpc_rqst *req, struct xdr_stream *xdr,
- const struct nfs4_create_arg *args)
+ const void *data)
{
+ const struct nfs4_create_arg *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -2218,8 +2265,10 @@
* Encode SYMLINK request
*/
static void nfs4_xdr_enc_symlink(struct rpc_rqst *req, struct xdr_stream *xdr,
- const struct nfs4_create_arg *args)
+ const void *data)
{
+ const struct nfs4_create_arg *args = data;
+
nfs4_xdr_enc_create(req, xdr, args);
}
@@ -2227,8 +2276,9 @@
* Encode GETATTR request
*/
static void nfs4_xdr_enc_getattr(struct rpc_rqst *req, struct xdr_stream *xdr,
- const struct nfs4_getattr_arg *args)
+ const void *data)
{
+ const struct nfs4_getattr_arg *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -2244,8 +2294,9 @@
* Encode a CLOSE request
*/
static void nfs4_xdr_enc_close(struct rpc_rqst *req, struct xdr_stream *xdr,
- struct nfs_closeargs *args)
+ const void *data)
{
+ const struct nfs_closeargs *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -2265,8 +2316,9 @@
* Encode an OPEN request
*/
static void nfs4_xdr_enc_open(struct rpc_rqst *req, struct xdr_stream *xdr,
- struct nfs_openargs *args)
+ const void *data)
{
+ const struct nfs_openargs *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -2287,8 +2339,9 @@
*/
static void nfs4_xdr_enc_open_confirm(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs_open_confirmargs *args)
+ const void *data)
{
+ const struct nfs_open_confirmargs *args = data;
struct compound_hdr hdr = {
.nops = 0,
};
@@ -2304,8 +2357,9 @@
*/
static void nfs4_xdr_enc_open_noattr(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs_openargs *args)
+ const void *data)
{
+ const struct nfs_openargs *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -2325,8 +2379,9 @@
*/
static void nfs4_xdr_enc_open_downgrade(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs_closeargs *args)
+ const void *data)
{
+ const struct nfs_closeargs *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -2344,8 +2399,9 @@
* Encode a LOCK request
*/
static void nfs4_xdr_enc_lock(struct rpc_rqst *req, struct xdr_stream *xdr,
- struct nfs_lock_args *args)
+ const void *data)
{
+ const struct nfs_lock_args *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -2361,8 +2417,9 @@
* Encode a LOCKT request
*/
static void nfs4_xdr_enc_lockt(struct rpc_rqst *req, struct xdr_stream *xdr,
- struct nfs_lockt_args *args)
+ const void *data)
{
+ const struct nfs_lockt_args *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -2378,8 +2435,9 @@
* Encode a LOCKU request
*/
static void nfs4_xdr_enc_locku(struct rpc_rqst *req, struct xdr_stream *xdr,
- struct nfs_locku_args *args)
+ const void *data)
{
+ const struct nfs_locku_args *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -2393,8 +2451,9 @@
static void nfs4_xdr_enc_release_lockowner(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs_release_lockowner_args *args)
+ const void *data)
{
+ const struct nfs_release_lockowner_args *args = data;
struct compound_hdr hdr = {
.minorversion = 0,
};
@@ -2408,8 +2467,9 @@
* Encode a READLINK request
*/
static void nfs4_xdr_enc_readlink(struct rpc_rqst *req, struct xdr_stream *xdr,
- const struct nfs4_readlink *args)
+ const void *data)
{
+ const struct nfs4_readlink *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -2428,8 +2488,9 @@
* Encode a READDIR request
*/
static void nfs4_xdr_enc_readdir(struct rpc_rqst *req, struct xdr_stream *xdr,
- const struct nfs4_readdir_arg *args)
+ const void *data)
{
+ const struct nfs4_readdir_arg *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -2451,8 +2512,9 @@
* Encode a READ request
*/
static void nfs4_xdr_enc_read(struct rpc_rqst *req, struct xdr_stream *xdr,
- struct nfs_pgio_args *args)
+ const void *data)
{
+ const struct nfs_pgio_args *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -2472,8 +2534,9 @@
* Encode an SETATTR request
*/
static void nfs4_xdr_enc_setattr(struct rpc_rqst *req, struct xdr_stream *xdr,
- struct nfs_setattrargs *args)
+ const void *data)
{
+ const struct nfs_setattrargs *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -2490,8 +2553,9 @@
* Encode a GETACL request
*/
static void nfs4_xdr_enc_getacl(struct rpc_rqst *req, struct xdr_stream *xdr,
- struct nfs_getaclargs *args)
+ const void *data)
{
+ const struct nfs_getaclargs *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -2513,8 +2577,9 @@
* Encode a WRITE request
*/
static void nfs4_xdr_enc_write(struct rpc_rqst *req, struct xdr_stream *xdr,
- struct nfs_pgio_args *args)
+ const void *data)
{
+ const struct nfs_pgio_args *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -2533,8 +2598,9 @@
* a COMMIT request
*/
static void nfs4_xdr_enc_commit(struct rpc_rqst *req, struct xdr_stream *xdr,
- struct nfs_commitargs *args)
+ const void *data)
{
+ const struct nfs_commitargs *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -2550,8 +2616,9 @@
* FSINFO request
*/
static void nfs4_xdr_enc_fsinfo(struct rpc_rqst *req, struct xdr_stream *xdr,
- struct nfs4_fsinfo_arg *args)
+ const void *data)
{
+ const struct nfs4_fsinfo_arg *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -2567,8 +2634,9 @@
* a PATHCONF request
*/
static void nfs4_xdr_enc_pathconf(struct rpc_rqst *req, struct xdr_stream *xdr,
- const struct nfs4_pathconf_arg *args)
+ const void *data)
{
+ const struct nfs4_pathconf_arg *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -2585,8 +2653,9 @@
* a STATFS request
*/
static void nfs4_xdr_enc_statfs(struct rpc_rqst *req, struct xdr_stream *xdr,
- const struct nfs4_statfs_arg *args)
+ const void *data)
{
+ const struct nfs4_statfs_arg *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -2604,8 +2673,9 @@
*/
static void nfs4_xdr_enc_server_caps(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs4_server_caps_arg *args)
+ const void *data)
{
+ const struct nfs4_server_caps_arg *args = data;
const u32 *bitmask = args->bitmask;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
@@ -2622,8 +2692,10 @@
* a RENEW request
*/
static void nfs4_xdr_enc_renew(struct rpc_rqst *req, struct xdr_stream *xdr,
- struct nfs_client *clp)
+ const void *data)
+
{
+ const struct nfs_client *clp = data;
struct compound_hdr hdr = {
.nops = 0,
};
@@ -2638,8 +2710,9 @@
*/
static void nfs4_xdr_enc_setclientid(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs4_setclientid *sc)
+ const void *data)
{
+ const struct nfs4_setclientid *sc = data;
struct compound_hdr hdr = {
.nops = 0,
};
@@ -2654,8 +2727,9 @@
*/
static void nfs4_xdr_enc_setclientid_confirm(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs4_setclientid_res *arg)
+ const void *data)
{
+ const struct nfs4_setclientid_res *arg = data;
struct compound_hdr hdr = {
.nops = 0,
};
@@ -2670,8 +2744,9 @@
*/
static void nfs4_xdr_enc_delegreturn(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nfs4_delegreturnargs *args)
+ const void *data)
{
+ const struct nfs4_delegreturnargs *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -2692,8 +2767,9 @@
*/
static void nfs4_xdr_enc_fs_locations(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs4_fs_locations_arg *args)
+ const void *data)
{
+ const struct nfs4_fs_locations_arg *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -2715,8 +2791,8 @@
}
/* Set up reply kvec to capture returned fs_locations array. */
- xdr_inline_pages(&req->rq_rcv_buf, replen << 2, &args->page,
- 0, PAGE_SIZE);
+ xdr_inline_pages(&req->rq_rcv_buf, replen << 2,
+ (struct page **)&args->page, 0, PAGE_SIZE);
encode_nops(&hdr);
}
@@ -2725,8 +2801,9 @@
*/
static void nfs4_xdr_enc_secinfo(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs4_secinfo_arg *args)
+ const void *data)
{
+ const struct nfs4_secinfo_arg *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -2743,8 +2820,9 @@
*/
static void nfs4_xdr_enc_fsid_present(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs4_fsid_present_arg *args)
+ const void *data)
{
+ const struct nfs4_fsid_present_arg *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -2764,8 +2842,9 @@
*/
static void nfs4_xdr_enc_bind_conn_to_session(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs41_bind_conn_to_session_args *args)
+ const void *data)
{
+ const struct nfs41_bind_conn_to_session_args *args = data;
struct compound_hdr hdr = {
.minorversion = args->client->cl_mvops->minor_version,
};
@@ -2780,8 +2859,9 @@
*/
static void nfs4_xdr_enc_exchange_id(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs41_exchange_id_args *args)
+ const void *data)
{
+ const struct nfs41_exchange_id_args *args = data;
struct compound_hdr hdr = {
.minorversion = args->client->cl_mvops->minor_version,
};
@@ -2796,8 +2876,9 @@
*/
static void nfs4_xdr_enc_create_session(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs41_create_session_args *args)
+ const void *data)
{
+ const struct nfs41_create_session_args *args = data;
struct compound_hdr hdr = {
.minorversion = args->client->cl_mvops->minor_version,
};
@@ -2812,8 +2893,9 @@
*/
static void nfs4_xdr_enc_destroy_session(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs4_session *session)
+ const void *data)
{
+ const struct nfs4_session *session = data;
struct compound_hdr hdr = {
.minorversion = session->clp->cl_mvops->minor_version,
};
@@ -2828,8 +2910,9 @@
*/
static void nfs4_xdr_enc_destroy_clientid(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs_client *clp)
+ const void *data)
{
+ const struct nfs_client *clp = data;
struct compound_hdr hdr = {
.minorversion = clp->cl_mvops->minor_version,
};
@@ -2843,8 +2926,9 @@
* a SEQUENCE request
*/
static void nfs4_xdr_enc_sequence(struct rpc_rqst *req, struct xdr_stream *xdr,
- struct nfs4_sequence_args *args)
+ const void *data)
{
+ const struct nfs4_sequence_args *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(args),
};
@@ -2859,8 +2943,9 @@
*/
static void nfs4_xdr_enc_get_lease_time(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs4_get_lease_time_args *args)
+ const void *data)
{
+ const struct nfs4_get_lease_time_args *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->la_seq_args),
};
@@ -2878,8 +2963,9 @@
*/
static void nfs4_xdr_enc_reclaim_complete(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs41_reclaim_complete_args *args)
+ const void *data)
{
+ const struct nfs41_reclaim_complete_args *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args)
};
@@ -2895,8 +2981,9 @@
*/
static void nfs4_xdr_enc_getdeviceinfo(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs4_getdeviceinfo_args *args)
+ const void *data)
{
+ const struct nfs4_getdeviceinfo_args *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -2919,8 +3006,9 @@
*/
static void nfs4_xdr_enc_layoutget(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs4_layoutget_args *args)
+ const void *data)
{
+ const struct nfs4_layoutget_args *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -2941,8 +3029,9 @@
*/
static void nfs4_xdr_enc_layoutcommit(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs4_layoutcommit_args *args)
+ const void *priv)
{
+ const struct nfs4_layoutcommit_args *args = priv;
struct nfs4_layoutcommit_data *data =
container_of(args, struct nfs4_layoutcommit_data, args);
struct compound_hdr hdr = {
@@ -2962,8 +3051,9 @@
*/
static void nfs4_xdr_enc_layoutreturn(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs4_layoutreturn_args *args)
+ const void *data)
{
+ const struct nfs4_layoutreturn_args *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -2978,10 +3068,11 @@
/*
* Encode SECINFO_NO_NAME request
*/
-static int nfs4_xdr_enc_secinfo_no_name(struct rpc_rqst *req,
+static void nfs4_xdr_enc_secinfo_no_name(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs41_secinfo_no_name_args *args)
+ const void *data)
{
+ const struct nfs41_secinfo_no_name_args *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -2991,7 +3082,6 @@
encode_putrootfh(xdr, &hdr);
encode_secinfo_no_name(xdr, args, &hdr);
encode_nops(&hdr);
- return 0;
}
/*
@@ -2999,8 +3089,9 @@
*/
static void nfs4_xdr_enc_test_stateid(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs41_test_stateid_args *args)
+ const void *data)
{
+ const struct nfs41_test_stateid_args *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -3016,8 +3107,9 @@
*/
static void nfs4_xdr_enc_free_stateid(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs41_free_stateid_args *args)
+ const void *data)
{
+ const struct nfs41_free_stateid_args *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -5005,6 +5097,11 @@
return decode_op_hdr(xdr, OP_LOOKUP);
}
+static int decode_lookupp(struct xdr_stream *xdr)
+{
+ return decode_op_hdr(xdr, OP_LOOKUPP);
+}
+
/* This is too sick! */
static int decode_space_limit(struct xdr_stream *xdr,
unsigned long *pagemod_limit)
@@ -6101,8 +6198,9 @@
*/
static int nfs4_xdr_dec_open_downgrade(struct rpc_rqst *rqstp,
struct xdr_stream *xdr,
- struct nfs_closeres *res)
+ void *data)
{
+ struct nfs_closeres *res = data;
struct compound_hdr hdr;
int status;
@@ -6130,8 +6228,9 @@
* Decode ACCESS response
*/
static int nfs4_xdr_dec_access(struct rpc_rqst *rqstp, struct xdr_stream *xdr,
- struct nfs4_accessres *res)
+ void *data)
{
+ struct nfs4_accessres *res = data;
struct compound_hdr hdr;
int status;
@@ -6156,8 +6255,9 @@
* Decode LOOKUP response
*/
static int nfs4_xdr_dec_lookup(struct rpc_rqst *rqstp, struct xdr_stream *xdr,
- struct nfs4_lookup_res *res)
+ void *data)
{
+ struct nfs4_lookup_res *res = data;
struct compound_hdr hdr;
int status;
@@ -6182,12 +6282,43 @@
}
/*
+ * Decode LOOKUPP response
+ */
+static int nfs4_xdr_dec_lookupp(struct rpc_rqst *rqstp, struct xdr_stream *xdr,
+ void *data)
+{
+ struct nfs4_lookupp_res *res = data;
+ struct compound_hdr hdr;
+ int status;
+
+ status = decode_compound_hdr(xdr, &hdr);
+ if (status)
+ goto out;
+ status = decode_sequence(xdr, &res->seq_res, rqstp);
+ if (status)
+ goto out;
+ status = decode_putfh(xdr);
+ if (status)
+ goto out;
+ status = decode_lookupp(xdr);
+ if (status)
+ goto out;
+ status = decode_getfh(xdr, res->fh);
+ if (status)
+ goto out;
+ status = decode_getfattr_label(xdr, res->fattr, res->label, res->server);
+out:
+ return status;
+}
+
+/*
* Decode LOOKUP_ROOT response
*/
static int nfs4_xdr_dec_lookup_root(struct rpc_rqst *rqstp,
struct xdr_stream *xdr,
- struct nfs4_lookup_res *res)
+ void *data)
{
+ struct nfs4_lookup_res *res = data;
struct compound_hdr hdr;
int status;
@@ -6212,8 +6343,9 @@
* Decode REMOVE response
*/
static int nfs4_xdr_dec_remove(struct rpc_rqst *rqstp, struct xdr_stream *xdr,
- struct nfs_removeres *res)
+ void *data)
{
+ struct nfs_removeres *res = data;
struct compound_hdr hdr;
int status;
@@ -6235,8 +6367,9 @@
* Decode RENAME response
*/
static int nfs4_xdr_dec_rename(struct rpc_rqst *rqstp, struct xdr_stream *xdr,
- struct nfs_renameres *res)
+ void *data)
{
+ struct nfs_renameres *res = data;
struct compound_hdr hdr;
int status;
@@ -6264,8 +6397,9 @@
* Decode LINK response
*/
static int nfs4_xdr_dec_link(struct rpc_rqst *rqstp, struct xdr_stream *xdr,
- struct nfs4_link_res *res)
+ void *data)
{
+ struct nfs4_link_res *res = data;
struct compound_hdr hdr;
int status;
@@ -6303,8 +6437,9 @@
* Decode CREATE response
*/
static int nfs4_xdr_dec_create(struct rpc_rqst *rqstp, struct xdr_stream *xdr,
- struct nfs4_create_res *res)
+ void *data)
{
+ struct nfs4_create_res *res = data;
struct compound_hdr hdr;
int status;
@@ -6332,7 +6467,7 @@
* Decode SYMLINK response
*/
static int nfs4_xdr_dec_symlink(struct rpc_rqst *rqstp, struct xdr_stream *xdr,
- struct nfs4_create_res *res)
+ void *res)
{
return nfs4_xdr_dec_create(rqstp, xdr, res);
}
@@ -6341,8 +6476,9 @@
* Decode GETATTR response
*/
static int nfs4_xdr_dec_getattr(struct rpc_rqst *rqstp, struct xdr_stream *xdr,
- struct nfs4_getattr_res *res)
+ void *data)
{
+ struct nfs4_getattr_res *res = data;
struct compound_hdr hdr;
int status;
@@ -6364,8 +6500,9 @@
* Encode an SETACL request
*/
static void nfs4_xdr_enc_setacl(struct rpc_rqst *req, struct xdr_stream *xdr,
- struct nfs_setaclargs *args)
+ const void *data)
{
+ const struct nfs_setaclargs *args = data;
struct compound_hdr hdr = {
.minorversion = nfs4_xdr_minorversion(&args->seq_args),
};
@@ -6382,8 +6519,9 @@
*/
static int
nfs4_xdr_dec_setacl(struct rpc_rqst *rqstp, struct xdr_stream *xdr,
- struct nfs_setaclres *res)
+ void *data)
{
+ struct nfs_setaclres *res = data;
struct compound_hdr hdr;
int status;
@@ -6406,8 +6544,9 @@
*/
static int
nfs4_xdr_dec_getacl(struct rpc_rqst *rqstp, struct xdr_stream *xdr,
- struct nfs_getaclres *res)
+ void *data)
{
+ struct nfs_getaclres *res = data;
struct compound_hdr hdr;
int status;
@@ -6434,8 +6573,9 @@
* Decode CLOSE response
*/
static int nfs4_xdr_dec_close(struct rpc_rqst *rqstp, struct xdr_stream *xdr,
- struct nfs_closeres *res)
+ void *data)
{
+ struct nfs_closeres *res = data;
struct compound_hdr hdr;
int status;
@@ -6468,8 +6608,9 @@
* Decode OPEN response
*/
static int nfs4_xdr_dec_open(struct rpc_rqst *rqstp, struct xdr_stream *xdr,
- struct nfs_openres *res)
+ void *data)
{
+ struct nfs_openres *res = data;
struct compound_hdr hdr;
int status;
@@ -6500,8 +6641,9 @@
*/
static int nfs4_xdr_dec_open_confirm(struct rpc_rqst *rqstp,
struct xdr_stream *xdr,
- struct nfs_open_confirmres *res)
+ void *data)
{
+ struct nfs_open_confirmres *res = data;
struct compound_hdr hdr;
int status;
@@ -6521,8 +6663,9 @@
*/
static int nfs4_xdr_dec_open_noattr(struct rpc_rqst *rqstp,
struct xdr_stream *xdr,
- struct nfs_openres *res)
+ void *data)
{
+ struct nfs_openres *res = data;
struct compound_hdr hdr;
int status;
@@ -6550,8 +6693,9 @@
*/
static int nfs4_xdr_dec_setattr(struct rpc_rqst *rqstp,
struct xdr_stream *xdr,
- struct nfs_setattrres *res)
+ void *data)
{
+ struct nfs_setattrres *res = data;
struct compound_hdr hdr;
int status;
@@ -6576,8 +6720,9 @@
* Decode LOCK response
*/
static int nfs4_xdr_dec_lock(struct rpc_rqst *rqstp, struct xdr_stream *xdr,
- struct nfs_lock_res *res)
+ void *data)
{
+ struct nfs_lock_res *res = data;
struct compound_hdr hdr;
int status;
@@ -6599,8 +6744,9 @@
* Decode LOCKT response
*/
static int nfs4_xdr_dec_lockt(struct rpc_rqst *rqstp, struct xdr_stream *xdr,
- struct nfs_lockt_res *res)
+ void *data)
{
+ struct nfs_lockt_res *res = data;
struct compound_hdr hdr;
int status;
@@ -6622,8 +6768,9 @@
* Decode LOCKU response
*/
static int nfs4_xdr_dec_locku(struct rpc_rqst *rqstp, struct xdr_stream *xdr,
- struct nfs_locku_res *res)
+ void *data)
{
+ struct nfs_locku_res *res = data;
struct compound_hdr hdr;
int status;
@@ -6658,8 +6805,9 @@
*/
static int nfs4_xdr_dec_readlink(struct rpc_rqst *rqstp,
struct xdr_stream *xdr,
- struct nfs4_readlink_res *res)
+ void *data)
{
+ struct nfs4_readlink_res *res = data;
struct compound_hdr hdr;
int status;
@@ -6681,8 +6829,9 @@
* Decode READDIR response
*/
static int nfs4_xdr_dec_readdir(struct rpc_rqst *rqstp, struct xdr_stream *xdr,
- struct nfs4_readdir_res *res)
+ void *data)
{
+ struct nfs4_readdir_res *res = data;
struct compound_hdr hdr;
int status;
@@ -6704,8 +6853,9 @@
* Decode Read response
*/
static int nfs4_xdr_dec_read(struct rpc_rqst *rqstp, struct xdr_stream *xdr,
- struct nfs_pgio_res *res)
+ void *data)
{
+ struct nfs_pgio_res *res = data;
struct compound_hdr hdr;
int status;
@@ -6730,8 +6880,9 @@
* Decode WRITE response
*/
static int nfs4_xdr_dec_write(struct rpc_rqst *rqstp, struct xdr_stream *xdr,
- struct nfs_pgio_res *res)
+ void *data)
{
+ struct nfs_pgio_res *res = data;
struct compound_hdr hdr;
int status;
@@ -6760,8 +6911,9 @@
* Decode COMMIT response
*/
static int nfs4_xdr_dec_commit(struct rpc_rqst *rqstp, struct xdr_stream *xdr,
- struct nfs_commitres *res)
+ void *data)
{
+ struct nfs_commitres *res = data;
struct compound_hdr hdr;
int status;
@@ -6784,8 +6936,9 @@
* Decode FSINFO response
*/
static int nfs4_xdr_dec_fsinfo(struct rpc_rqst *req, struct xdr_stream *xdr,
- struct nfs4_fsinfo_res *res)
+ void *data)
{
+ struct nfs4_fsinfo_res *res = data;
struct compound_hdr hdr;
int status;
@@ -6803,8 +6956,9 @@
* Decode PATHCONF response
*/
static int nfs4_xdr_dec_pathconf(struct rpc_rqst *req, struct xdr_stream *xdr,
- struct nfs4_pathconf_res *res)
+ void *data)
{
+ struct nfs4_pathconf_res *res = data;
struct compound_hdr hdr;
int status;
@@ -6822,8 +6976,9 @@
* Decode STATFS response
*/
static int nfs4_xdr_dec_statfs(struct rpc_rqst *req, struct xdr_stream *xdr,
- struct nfs4_statfs_res *res)
+ void *data)
{
+ struct nfs4_statfs_res *res = data;
struct compound_hdr hdr;
int status;
@@ -6842,8 +6997,9 @@
*/
static int nfs4_xdr_dec_server_caps(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs4_server_caps_res *res)
+ void *data)
{
+ struct nfs4_server_caps_res *res = data;
struct compound_hdr hdr;
int status;
@@ -6881,8 +7037,9 @@
*/
static int nfs4_xdr_dec_setclientid(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs4_setclientid_res *res)
+ void *data)
{
+ struct nfs4_setclientid_res *res = data;
struct compound_hdr hdr;
int status;
@@ -6896,7 +7053,8 @@
* Decode SETCLIENTID_CONFIRM response
*/
static int nfs4_xdr_dec_setclientid_confirm(struct rpc_rqst *req,
- struct xdr_stream *xdr)
+ struct xdr_stream *xdr,
+ void *data)
{
struct compound_hdr hdr;
int status;
@@ -6912,8 +7070,9 @@
*/
static int nfs4_xdr_dec_delegreturn(struct rpc_rqst *rqstp,
struct xdr_stream *xdr,
- struct nfs4_delegreturnres *res)
+ void *data)
{
+ struct nfs4_delegreturnres *res = data;
struct compound_hdr hdr;
int status;
@@ -6947,8 +7106,9 @@
*/
static int nfs4_xdr_dec_fs_locations(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct nfs4_fs_locations_res *res)
+ void *data)
{
+ struct nfs4_fs_locations_res *res = data;
struct compound_hdr hdr;
int status;
@@ -6990,8 +7150,9 @@
*/
static int nfs4_xdr_dec_secinfo(struct rpc_rqst *rqstp,
struct xdr_stream *xdr,
- struct nfs4_secinfo_res *res)
+ void *data)
{
+ struct nfs4_secinfo_res *res = data;
struct compound_hdr hdr;
int status;
@@ -7014,8 +7175,9 @@
*/
static int nfs4_xdr_dec_fsid_present(struct rpc_rqst *rqstp,
struct xdr_stream *xdr,
- struct nfs4_fsid_present_res *res)
+ void *data)
{
+ struct nfs4_fsid_present_res *res = data;
struct compound_hdr hdr;
int status;
@@ -7075,7 +7237,7 @@
*/
static int nfs4_xdr_dec_create_session(struct rpc_rqst *rqstp,
struct xdr_stream *xdr,
- struct nfs41_create_session_res *res)
+ void *res)
{
struct compound_hdr hdr;
int status;
@@ -7123,7 +7285,7 @@
*/
static int nfs4_xdr_dec_sequence(struct rpc_rqst *rqstp,
struct xdr_stream *xdr,
- struct nfs4_sequence_res *res)
+ void *res)
{
struct compound_hdr hdr;
int status;
@@ -7139,8 +7301,9 @@
*/
static int nfs4_xdr_dec_get_lease_time(struct rpc_rqst *rqstp,
struct xdr_stream *xdr,
- struct nfs4_get_lease_time_res *res)
+ void *data)
{
+ struct nfs4_get_lease_time_res *res = data;
struct compound_hdr hdr;
int status;
@@ -7159,8 +7322,9 @@
*/
static int nfs4_xdr_dec_reclaim_complete(struct rpc_rqst *rqstp,
struct xdr_stream *xdr,
- struct nfs41_reclaim_complete_res *res)
+ void *data)
{
+ struct nfs41_reclaim_complete_res *res = data;
struct compound_hdr hdr;
int status;
@@ -7177,8 +7341,9 @@
*/
static int nfs4_xdr_dec_getdeviceinfo(struct rpc_rqst *rqstp,
struct xdr_stream *xdr,
- struct nfs4_getdeviceinfo_res *res)
+ void *data)
{
+ struct nfs4_getdeviceinfo_res *res = data;
struct compound_hdr hdr;
int status;
@@ -7198,8 +7363,9 @@
*/
static int nfs4_xdr_dec_layoutget(struct rpc_rqst *rqstp,
struct xdr_stream *xdr,
- struct nfs4_layoutget_res *res)
+ void *data)
{
+ struct nfs4_layoutget_res *res = data;
struct compound_hdr hdr;
int status;
@@ -7222,8 +7388,9 @@
*/
static int nfs4_xdr_dec_layoutreturn(struct rpc_rqst *rqstp,
struct xdr_stream *xdr,
- struct nfs4_layoutreturn_res *res)
+ void *data)
{
+ struct nfs4_layoutreturn_res *res = data;
struct compound_hdr hdr;
int status;
@@ -7246,8 +7413,9 @@
*/
static int nfs4_xdr_dec_layoutcommit(struct rpc_rqst *rqstp,
struct xdr_stream *xdr,
- struct nfs4_layoutcommit_res *res)
+ void *data)
{
+ struct nfs4_layoutcommit_res *res = data;
struct compound_hdr hdr;
int status;
@@ -7273,8 +7441,9 @@
*/
static int nfs4_xdr_dec_secinfo_no_name(struct rpc_rqst *rqstp,
struct xdr_stream *xdr,
- struct nfs4_secinfo_res *res)
+ void *data)
{
+ struct nfs4_secinfo_res *res = data;
struct compound_hdr hdr;
int status;
@@ -7297,8 +7466,9 @@
*/
static int nfs4_xdr_dec_test_stateid(struct rpc_rqst *rqstp,
struct xdr_stream *xdr,
- struct nfs41_test_stateid_res *res)
+ void *data)
{
+ struct nfs41_test_stateid_res *res = data;
struct compound_hdr hdr;
int status;
@@ -7318,8 +7488,9 @@
*/
static int nfs4_xdr_dec_free_stateid(struct rpc_rqst *rqstp,
struct xdr_stream *xdr,
- struct nfs41_free_stateid_res *res)
+ void *data)
{
+ struct nfs41_free_stateid_res *res = data;
struct compound_hdr hdr;
int status;
@@ -7350,7 +7521,7 @@
* on a directory already in our cache.
*/
int nfs4_decode_dirent(struct xdr_stream *xdr, struct nfs_entry *entry,
- int plus)
+ bool plus)
{
unsigned int savep;
uint32_t bitmap[3] = {0};
@@ -7484,8 +7655,8 @@
#define PROC(proc, argtype, restype) \
[NFSPROC4_CLNT_##proc] = { \
.p_proc = NFSPROC4_COMPOUND, \
- .p_encode = (kxdreproc_t)nfs4_xdr_##argtype, \
- .p_decode = (kxdrdproc_t)nfs4_xdr_##restype, \
+ .p_encode = nfs4_xdr_##argtype, \
+ .p_decode = nfs4_xdr_##restype, \
.p_arglen = NFS4_##argtype##_sz, \
.p_replen = NFS4_##restype##_sz, \
.p_statidx = NFSPROC4_CLNT_##proc, \
@@ -7497,7 +7668,7 @@
.p_name = #proc, \
}
-struct rpc_procinfo nfs4_procedures[] = {
+const struct rpc_procinfo nfs4_procedures[] = {
PROC(READ, enc_read, dec_read),
PROC(WRITE, enc_write, dec_write),
PROC(COMMIT, enc_commit, dec_commit),
@@ -7517,6 +7688,7 @@
PROC(ACCESS, enc_access, dec_access),
PROC(GETATTR, enc_getattr, dec_getattr),
PROC(LOOKUP, enc_lookup, dec_lookup),
+ PROC(LOOKUPP, enc_lookupp, dec_lookupp),
PROC(LOOKUP_ROOT, enc_lookup_root, dec_lookup_root),
PROC(REMOVE, enc_remove, dec_remove),
PROC(RENAME, enc_rename, dec_rename),
@@ -7564,10 +7736,12 @@
#endif /* CONFIG_NFS_V4_2 */
};
+static unsigned int nfs_version4_counts[ARRAY_SIZE(nfs4_procedures)];
const struct rpc_version nfs_version4 = {
.number = 4,
.nrprocs = ARRAY_SIZE(nfs4_procedures),
- .procs = nfs4_procedures
+ .procs = nfs4_procedures,
+ .counts = nfs_version4_counts,
};
/*
diff --git a/fs/nfs/pagelist.c b/fs/nfs/pagelist.c
index ad92b40..de9066a 100644
--- a/fs/nfs/pagelist.c
+++ b/fs/nfs/pagelist.c
@@ -50,8 +50,8 @@
hdr->cred = hdr->req->wb_context->cred;
hdr->io_start = req_offset(hdr->req);
hdr->good_bytes = mirror->pg_count;
+ hdr->io_completion = desc->pg_io_completion;
hdr->dreq = desc->pg_dreq;
- hdr->layout_private = desc->pg_layout_private;
hdr->release = release;
hdr->completion_ops = desc->pg_completion_ops;
if (hdr->completion_ops->init_hdr)
@@ -155,9 +155,12 @@
if (!test_and_set_bit(PG_HEADLOCK, &head->wb_flags))
return 0;
- if (!nonblock)
+ if (!nonblock) {
+ set_bit(PG_CONTENDED1, &head->wb_flags);
+ smp_mb__after_atomic();
return wait_on_bit_lock(&head->wb_flags, PG_HEADLOCK,
TASK_UNINTERRUPTIBLE);
+ }
return -EAGAIN;
}
@@ -175,6 +178,10 @@
WARN_ON_ONCE(head != head->wb_head);
+ if (!test_bit(PG_HEADLOCK, &head->wb_flags))
+ return;
+ set_bit(PG_CONTENDED1, &head->wb_flags);
+ smp_mb__after_atomic();
wait_on_bit(&head->wb_flags, PG_HEADLOCK,
TASK_UNINTERRUPTIBLE);
}
@@ -193,6 +200,8 @@
smp_mb__before_atomic();
clear_bit(PG_HEADLOCK, &head->wb_flags);
smp_mb__after_atomic();
+ if (!test_bit(PG_CONTENDED1, &head->wb_flags))
+ return;
wake_up_bit(&head->wb_flags, PG_HEADLOCK);
}
@@ -383,6 +392,8 @@
smp_mb__before_atomic();
clear_bit(PG_BUSY, &req->wb_flags);
smp_mb__after_atomic();
+ if (!test_bit(PG_CONTENDED2, &req->wb_flags))
+ return;
wake_up_bit(&req->wb_flags, PG_BUSY);
}
@@ -465,6 +476,10 @@
int
nfs_wait_on_request(struct nfs_page *req)
{
+ if (!test_bit(PG_BUSY, &req->wb_flags))
+ return 0;
+ set_bit(PG_CONTENDED2, &req->wb_flags);
+ smp_mb__after_atomic();
return wait_on_bit_io(&req->wb_flags, PG_BUSY,
TASK_UNINTERRUPTIBLE);
}
@@ -710,8 +725,8 @@
desc->pg_ioflags = io_flags;
desc->pg_error = 0;
desc->pg_lseg = NULL;
+ desc->pg_io_completion = NULL;
desc->pg_dreq = NULL;
- desc->pg_layout_private = NULL;
desc->pg_bsize = bsize;
desc->pg_mirror_count = 1;
@@ -779,6 +794,7 @@
gfp_t gfp_flags = GFP_KERNEL;
pagecount = nfs_page_array_len(mirror->pg_base, mirror->pg_count);
+ pg_array->npages = pagecount;
if (pagecount <= ARRAY_SIZE(pg_array->page_array))
pg_array->pagevec = pg_array->page_array;
@@ -1233,6 +1249,7 @@
{
LIST_HEAD(failed);
+ desc->pg_io_completion = hdr->io_completion;
desc->pg_dreq = hdr->dreq;
while (!list_empty(&hdr->pages)) {
struct nfs_page *req = nfs_list_entry(hdr->pages.next);
diff --git a/fs/nfs/pnfs_nfs.c b/fs/nfs/pnfs_nfs.c
index d40755a..25f28fa 100644
--- a/fs/nfs/pnfs_nfs.c
+++ b/fs/nfs/pnfs_nfs.c
@@ -159,13 +159,18 @@
{
struct pnfs_commit_bucket *b;
struct pnfs_layout_segment *freeme;
+ int nwritten;
int i;
lockdep_assert_held(&cinfo->inode->i_lock);
restart:
for (i = 0, b = cinfo->ds->buckets; i < cinfo->ds->nbuckets; i++, b++) {
- if (pnfs_generic_transfer_commit_list(&b->written, dst,
- cinfo, 0)) {
+ nwritten = pnfs_generic_transfer_commit_list(&b->written,
+ dst, cinfo, 0);
+ if (!nwritten)
+ continue;
+ cinfo->ds->nwritten -= nwritten;
+ if (list_empty(&b->written)) {
freeme = b->wlseg;
b->wlseg = NULL;
spin_unlock(&cinfo->inode->i_lock);
@@ -174,7 +179,6 @@
goto restart;
}
}
- cinfo->ds->nwritten = 0;
}
EXPORT_SYMBOL_GPL(pnfs_generic_recover_commit_reqs);
@@ -183,6 +187,7 @@
struct pnfs_ds_commit_info *fl_cinfo = cinfo->ds;
struct pnfs_commit_bucket *bucket;
struct pnfs_layout_segment *freeme;
+ struct list_head *pos;
LIST_HEAD(pages);
int i;
@@ -193,6 +198,8 @@
continue;
freeme = bucket->clseg;
bucket->clseg = NULL;
+ list_for_each(pos, &bucket->committing)
+ cinfo->ds->ncommitting--;
list_splice_init(&bucket->committing, &pages);
spin_unlock(&cinfo->inode->i_lock);
nfs_retry_commit(&pages, freeme, cinfo, i);
@@ -217,13 +224,6 @@
for (i = 0; i < fl_cinfo->nbuckets; i++, bucket++) {
if (list_empty(&bucket->committing))
continue;
- /*
- * If the layout segment is invalid, then let
- * pnfs_generic_retry_commit() clean up the bucket.
- */
- if (bucket->clseg && !pnfs_is_valid_lseg(bucket->clseg) &&
- !test_bit(NFS_LSEG_LAYOUTRETURN, &bucket->clseg->pls_flags))
- break;
data = nfs_commitdata_alloc(false);
if (!data)
break;
@@ -243,9 +243,12 @@
struct nfs_commit_info *cinfo)
{
struct pnfs_commit_bucket *bucket;
+ struct list_head *pos;
bucket = &cinfo->ds->buckets[data->ds_commit_index];
spin_lock(&cinfo->inode->i_lock);
+ list_for_each(pos, &bucket->committing)
+ cinfo->ds->ncommitting--;
list_splice_init(&bucket->committing, pages);
data->lseg = bucket->clseg;
bucket->clseg = NULL;
@@ -330,7 +333,6 @@
}
}
out:
- cinfo->ds->ncommitting = 0;
return PNFS_ATTEMPTED;
}
EXPORT_SYMBOL_GPL(pnfs_generic_commit_pagelist);
diff --git a/fs/nfs/proc.c b/fs/nfs/proc.c
index 9872cf6..7962e49 100644
--- a/fs/nfs/proc.c
+++ b/fs/nfs/proc.c
@@ -485,7 +485,7 @@
*/
static int
nfs_proc_readdir(struct dentry *dentry, struct rpc_cred *cred,
- u64 cookie, struct page **pages, unsigned int count, int plus)
+ u64 cookie, struct page **pages, unsigned int count, bool plus)
{
struct inode *dir = d_inode(dentry);
struct nfs_readdirargs arg = {
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index c5334c0..d828ef8 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -879,7 +879,7 @@
if (nfss->options & NFS_OPTION_FSCACHE) {
seq_printf(m, "\n\tfsc:\t");
for (i = 0; i < __NFSIOS_FSCACHEMAX; i++)
- seq_printf(m, "%Lu ", totals.bytes[i]);
+ seq_printf(m, "%Lu ", totals.fscache[i]);
}
#endif
seq_printf(m, "\n");
@@ -2339,6 +2339,7 @@
*/
sb->s_flags |= MS_POSIXACL;
sb->s_time_gran = 1;
+ sb->s_export_op = &nfs_export_ops;
}
nfs_initialise_sb(sb);
@@ -2360,6 +2361,7 @@
sb->s_xattr = old_sb->s_xattr;
sb->s_op = old_sb->s_op;
sb->s_time_gran = 1;
+ sb->s_export_op = old_sb->s_export_op;
if (server->nfs_client->rpc_ops->version != 2) {
/* The VFS shouldn't apply the umask to mode bits. We will do
diff --git a/fs/nfs/unlink.c b/fs/nfs/unlink.c
index 191aa57..e3949d9 100644
--- a/fs/nfs/unlink.c
+++ b/fs/nfs/unlink.c
@@ -288,6 +288,19 @@
if (d_really_is_positive(data->old_dentry))
nfs_mark_for_revalidate(d_inode(data->old_dentry));
+ /* The result of the rename is unknown. Play it safe by
+ * forcing a new lookup */
+ if (data->cancelled) {
+ spin_lock(&data->old_dir->i_lock);
+ nfs_force_lookup_revalidate(data->old_dir);
+ spin_unlock(&data->old_dir->i_lock);
+ if (data->new_dir != data->old_dir) {
+ spin_lock(&data->new_dir->i_lock);
+ nfs_force_lookup_revalidate(data->new_dir);
+ spin_unlock(&data->new_dir->i_lock);
+ }
+ }
+
dput(data->old_dentry);
dput(data->new_dentry);
iput(data->old_dir);
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index db7ba54..b1af5de 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -40,6 +40,12 @@
#define MIN_POOL_WRITE (32)
#define MIN_POOL_COMMIT (4)
+struct nfs_io_completion {
+ void (*complete)(void *data);
+ void *data;
+ struct kref refcount;
+};
+
/*
* Local function declarations
*/
@@ -108,6 +114,39 @@
mempool_free(hdr, nfs_wdata_mempool);
}
+static struct nfs_io_completion *nfs_io_completion_alloc(gfp_t gfp_flags)
+{
+ return kmalloc(sizeof(struct nfs_io_completion), gfp_flags);
+}
+
+static void nfs_io_completion_init(struct nfs_io_completion *ioc,
+ void (*complete)(void *), void *data)
+{
+ ioc->complete = complete;
+ ioc->data = data;
+ kref_init(&ioc->refcount);
+}
+
+static void nfs_io_completion_release(struct kref *kref)
+{
+ struct nfs_io_completion *ioc = container_of(kref,
+ struct nfs_io_completion, refcount);
+ ioc->complete(ioc->data);
+ kfree(ioc);
+}
+
+static void nfs_io_completion_get(struct nfs_io_completion *ioc)
+{
+ if (ioc != NULL)
+ kref_get(&ioc->refcount);
+}
+
+static void nfs_io_completion_put(struct nfs_io_completion *ioc)
+{
+ if (ioc != NULL)
+ kref_put(&ioc->refcount, nfs_io_completion_release);
+}
+
static void nfs_context_set_write_error(struct nfs_open_context *ctx, int error)
{
ctx->error = error;
@@ -681,18 +720,29 @@
return ret;
}
+static void nfs_io_completion_commit(void *inode)
+{
+ nfs_commit_inode(inode, 0);
+}
+
int nfs_writepages(struct address_space *mapping, struct writeback_control *wbc)
{
struct inode *inode = mapping->host;
struct nfs_pageio_descriptor pgio;
+ struct nfs_io_completion *ioc = nfs_io_completion_alloc(GFP_NOFS);
int err;
nfs_inc_stats(inode, NFSIOS_VFSWRITEPAGES);
+ if (ioc)
+ nfs_io_completion_init(ioc, nfs_io_completion_commit, inode);
+
nfs_pageio_init_write(&pgio, inode, wb_priority(wbc), false,
&nfs_async_write_completion_ops);
+ pgio.pg_io_completion = ioc;
err = write_cache_pages(mapping, wbc, nfs_writepages_callback, &pgio);
nfs_pageio_complete(&pgio);
+ nfs_io_completion_put(ioc);
if (err < 0)
goto out_err;
@@ -940,6 +990,11 @@
return hdr->verf.committed != NFS_FILE_SYNC;
}
+static void nfs_async_write_init(struct nfs_pgio_header *hdr)
+{
+ nfs_io_completion_get(hdr->io_completion);
+}
+
static void nfs_write_completion(struct nfs_pgio_header *hdr)
{
struct nfs_commit_info cinfo;
@@ -973,6 +1028,7 @@
nfs_release_request(req);
}
out:
+ nfs_io_completion_put(hdr->io_completion);
hdr->release(hdr);
}
@@ -1378,6 +1434,7 @@
}
static const struct nfs_pgio_completion_ops nfs_async_write_completion_ops = {
+ .init_hdr = nfs_async_write_init,
.error_cleanup = nfs_async_write_error,
.completion = nfs_write_completion,
.reschedule_io = nfs_async_write_reschedule_io,
@@ -1884,7 +1941,7 @@
/* Don't commit yet if this is a non-blocking flush and there
* are a lot of outstanding writes for this mapping.
*/
- if (nfsi->commit_info.ncommit <= (nfsi->nrequests >> 1))
+ if (mapping_tagged(inode->i_mapping, PAGECACHE_TAG_WRITEBACK))
goto out_mark_dirty;
/* don't wait for the COMMIT response */
diff --git a/fs/nfsd/current_stateid.h b/fs/nfsd/current_stateid.h
index 4123551..34075ce 100644
--- a/fs/nfsd/current_stateid.h
+++ b/fs/nfsd/current_stateid.h
@@ -8,21 +8,33 @@
/*
* functions to set current state id
*/
-extern void nfsd4_set_opendowngradestateid(struct nfsd4_compound_state *cstate, struct nfsd4_open_downgrade *);
-extern void nfsd4_set_openstateid(struct nfsd4_compound_state *, struct nfsd4_open *);
-extern void nfsd4_set_lockstateid(struct nfsd4_compound_state *, struct nfsd4_lock *);
-extern void nfsd4_set_closestateid(struct nfsd4_compound_state *, struct nfsd4_close *);
+extern void nfsd4_set_opendowngradestateid(struct nfsd4_compound_state *,
+ union nfsd4_op_u *);
+extern void nfsd4_set_openstateid(struct nfsd4_compound_state *,
+ union nfsd4_op_u *);
+extern void nfsd4_set_lockstateid(struct nfsd4_compound_state *,
+ union nfsd4_op_u *);
+extern void nfsd4_set_closestateid(struct nfsd4_compound_state *,
+ union nfsd4_op_u *);
/*
* functions to consume current state id
*/
-extern void nfsd4_get_opendowngradestateid(struct nfsd4_compound_state *cstate, struct nfsd4_open_downgrade *);
-extern void nfsd4_get_delegreturnstateid(struct nfsd4_compound_state *, struct nfsd4_delegreturn *);
-extern void nfsd4_get_freestateid(struct nfsd4_compound_state *, struct nfsd4_free_stateid *);
-extern void nfsd4_get_setattrstateid(struct nfsd4_compound_state *, struct nfsd4_setattr *);
-extern void nfsd4_get_closestateid(struct nfsd4_compound_state *, struct nfsd4_close *);
-extern void nfsd4_get_lockustateid(struct nfsd4_compound_state *, struct nfsd4_locku *);
-extern void nfsd4_get_readstateid(struct nfsd4_compound_state *, struct nfsd4_read *);
-extern void nfsd4_get_writestateid(struct nfsd4_compound_state *, struct nfsd4_write *);
+extern void nfsd4_get_opendowngradestateid(struct nfsd4_compound_state *,
+ union nfsd4_op_u *);
+extern void nfsd4_get_delegreturnstateid(struct nfsd4_compound_state *,
+ union nfsd4_op_u *);
+extern void nfsd4_get_freestateid(struct nfsd4_compound_state *,
+ union nfsd4_op_u *);
+extern void nfsd4_get_setattrstateid(struct nfsd4_compound_state *,
+ union nfsd4_op_u *);
+extern void nfsd4_get_closestateid(struct nfsd4_compound_state *,
+ union nfsd4_op_u *);
+extern void nfsd4_get_lockustateid(struct nfsd4_compound_state *,
+ union nfsd4_op_u *);
+extern void nfsd4_get_readstateid(struct nfsd4_compound_state *,
+ union nfsd4_op_u *);
+extern void nfsd4_get_writestateid(struct nfsd4_compound_state *,
+ union nfsd4_op_u *);
#endif /* _NFSD4_CURRENT_STATE_H */
diff --git a/fs/nfsd/nfs2acl.c b/fs/nfsd/nfs2acl.c
index 838f90f..6276ec8 100644
--- a/fs/nfsd/nfs2acl.c
+++ b/fs/nfsd/nfs2acl.c
@@ -19,7 +19,7 @@
* NULL call.
*/
static __be32
-nfsacld_proc_null(struct svc_rqst *rqstp, void *argp, void *resp)
+nfsacld_proc_null(struct svc_rqst *rqstp)
{
return nfs_ok;
}
@@ -27,9 +27,10 @@
/*
* Get the Access and/or Default ACL of a file.
*/
-static __be32 nfsacld_proc_getacl(struct svc_rqst * rqstp,
- struct nfsd3_getaclargs *argp, struct nfsd3_getaclres *resp)
+static __be32 nfsacld_proc_getacl(struct svc_rqst *rqstp)
{
+ struct nfsd3_getaclargs *argp = rqstp->rq_argp;
+ struct nfsd3_getaclres *resp = rqstp->rq_resp;
struct posix_acl *acl;
struct inode *inode;
svc_fh *fh;
@@ -87,10 +88,10 @@
/*
* Set the Access and/or Default ACL of a file.
*/
-static __be32 nfsacld_proc_setacl(struct svc_rqst * rqstp,
- struct nfsd3_setaclargs *argp,
- struct nfsd_attrstat *resp)
+static __be32 nfsacld_proc_setacl(struct svc_rqst *rqstp)
{
+ struct nfsd3_setaclargs *argp = rqstp->rq_argp;
+ struct nfsd_attrstat *resp = rqstp->rq_resp;
struct inode *inode;
svc_fh *fh;
__be32 nfserr = 0;
@@ -141,9 +142,10 @@
/*
* Check file attributes
*/
-static __be32 nfsacld_proc_getattr(struct svc_rqst * rqstp,
- struct nfsd_fhandle *argp, struct nfsd_attrstat *resp)
+static __be32 nfsacld_proc_getattr(struct svc_rqst *rqstp)
{
+ struct nfsd_fhandle *argp = rqstp->rq_argp;
+ struct nfsd_attrstat *resp = rqstp->rq_resp;
__be32 nfserr;
dprintk("nfsd: GETATTR %s\n", SVCFH_fmt(&argp->fh));
@@ -158,9 +160,10 @@
/*
* Check file access
*/
-static __be32 nfsacld_proc_access(struct svc_rqst *rqstp, struct nfsd3_accessargs *argp,
- struct nfsd3_accessres *resp)
+static __be32 nfsacld_proc_access(struct svc_rqst *rqstp)
{
+ struct nfsd3_accessargs *argp = rqstp->rq_argp;
+ struct nfsd3_accessres *resp = rqstp->rq_resp;
__be32 nfserr;
dprintk("nfsd: ACCESS(2acl) %s 0x%x\n",
@@ -179,9 +182,10 @@
/*
* XDR decode functions
*/
-static int nfsaclsvc_decode_getaclargs(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_getaclargs *argp)
+static int nfsaclsvc_decode_getaclargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd3_getaclargs *argp = rqstp->rq_argp;
+
p = nfs2svc_decode_fh(p, &argp->fh);
if (!p)
return 0;
@@ -191,9 +195,9 @@
}
-static int nfsaclsvc_decode_setaclargs(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_setaclargs *argp)
+static int nfsaclsvc_decode_setaclargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd3_setaclargs *argp = rqstp->rq_argp;
struct kvec *head = rqstp->rq_arg.head;
unsigned int base;
int n;
@@ -217,18 +221,20 @@
return (n > 0);
}
-static int nfsaclsvc_decode_fhandleargs(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd_fhandle *argp)
+static int nfsaclsvc_decode_fhandleargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd_fhandle *argp = rqstp->rq_argp;
+
p = nfs2svc_decode_fh(p, &argp->fh);
if (!p)
return 0;
return xdr_argsize_check(rqstp, p);
}
-static int nfsaclsvc_decode_accessargs(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_accessargs *argp)
+static int nfsaclsvc_decode_accessargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd3_accessargs *argp = rqstp->rq_argp;
+
p = nfs2svc_decode_fh(p, &argp->fh);
if (!p)
return 0;
@@ -245,15 +251,15 @@
* There must be an encoding function for void results so svc_process
* will work properly.
*/
-static int nfsaclsvc_encode_voidres(struct svc_rqst *rqstp, __be32 *p, void *dummy)
+static int nfsaclsvc_encode_voidres(struct svc_rqst *rqstp, __be32 *p)
{
return xdr_ressize_check(rqstp, p);
}
/* GETACL */
-static int nfsaclsvc_encode_getaclres(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_getaclres *resp)
+static int nfsaclsvc_encode_getaclres(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd3_getaclres *resp = rqstp->rq_resp;
struct dentry *dentry = resp->fh.fh_dentry;
struct inode *inode;
struct kvec *head = rqstp->rq_res.head;
@@ -296,17 +302,19 @@
return (n > 0);
}
-static int nfsaclsvc_encode_attrstatres(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd_attrstat *resp)
+static int nfsaclsvc_encode_attrstatres(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd_attrstat *resp = rqstp->rq_resp;
+
p = nfs2svc_encode_fattr(rqstp, p, &resp->fh, &resp->stat);
return xdr_ressize_check(rqstp, p);
}
/* ACCESS */
-static int nfsaclsvc_encode_accessres(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_accessres *resp)
+static int nfsaclsvc_encode_accessres(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd3_accessres *resp = rqstp->rq_resp;
+
p = nfs2svc_encode_fattr(rqstp, p, &resp->fh, &resp->stat);
*p++ = htonl(resp->access);
return xdr_ressize_check(rqstp, p);
@@ -315,27 +323,27 @@
/*
* XDR release functions
*/
-static int nfsaclsvc_release_getacl(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_getaclres *resp)
+static void nfsaclsvc_release_getacl(struct svc_rqst *rqstp)
{
+ struct nfsd3_getaclres *resp = rqstp->rq_resp;
+
fh_put(&resp->fh);
posix_acl_release(resp->acl_access);
posix_acl_release(resp->acl_default);
- return 1;
}
-static int nfsaclsvc_release_attrstat(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd_attrstat *resp)
+static void nfsaclsvc_release_attrstat(struct svc_rqst *rqstp)
{
+ struct nfsd_attrstat *resp = rqstp->rq_resp;
+
fh_put(&resp->fh);
- return 1;
}
-static int nfsaclsvc_release_access(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_accessres *resp)
+static void nfsaclsvc_release_access(struct svc_rqst *rqstp)
{
- fh_put(&resp->fh);
- return 1;
+ struct nfsd3_accessres *resp = rqstp->rq_resp;
+
+ fh_put(&resp->fh);
}
#define nfsaclsvc_decode_voidargs NULL
@@ -345,24 +353,24 @@
#define nfsd3_voidres nfsd3_voidargs
struct nfsd3_voidargs { int dummy; };
-#define PROC(name, argt, rest, relt, cache, respsize) \
- { (svc_procfunc) nfsacld_proc_##name, \
- (kxdrproc_t) nfsaclsvc_decode_##argt##args, \
- (kxdrproc_t) nfsaclsvc_encode_##rest##res, \
- (kxdrproc_t) nfsaclsvc_release_##relt, \
- sizeof(struct nfsd3_##argt##args), \
- sizeof(struct nfsd3_##rest##res), \
- 0, \
- cache, \
- respsize, \
- }
+#define PROC(name, argt, rest, relt, cache, respsize) \
+{ \
+ .pc_func = nfsacld_proc_##name, \
+ .pc_decode = nfsaclsvc_decode_##argt##args, \
+ .pc_encode = nfsaclsvc_encode_##rest##res, \
+ .pc_release = nfsaclsvc_release_##relt, \
+ .pc_argsize = sizeof(struct nfsd3_##argt##args), \
+ .pc_ressize = sizeof(struct nfsd3_##rest##res), \
+ .pc_cachetype = cache, \
+ .pc_xdrressize = respsize, \
+}
#define ST 1 /* status*/
#define AT 21 /* attributes */
#define pAT (1+AT) /* post attributes - conditional */
#define ACL (1+NFS_ACL_MAX_ENTRIES*3) /* Access Control List */
-static struct svc_procedure nfsd_acl_procedures2[] = {
+static const struct svc_procedure nfsd_acl_procedures2[] = {
PROC(null, void, void, void, RC_NOCACHE, ST),
PROC(getacl, getacl, getacl, getacl, RC_NOCACHE, ST+1+2*(1+ACL)),
PROC(setacl, setacl, attrstat, attrstat, RC_NOCACHE, ST+AT),
@@ -370,10 +378,12 @@
PROC(access, access, access, access, RC_NOCACHE, ST+AT+1),
};
-struct svc_version nfsd_acl_version2 = {
- .vs_vers = 2,
- .vs_nproc = 5,
- .vs_proc = nfsd_acl_procedures2,
- .vs_dispatch = nfsd_dispatch,
- .vs_xdrsize = NFS3_SVC_XDRSIZE,
+static unsigned int nfsd_acl_count2[ARRAY_SIZE(nfsd_acl_procedures2)];
+const struct svc_version nfsd_acl_version2 = {
+ .vs_vers = 2,
+ .vs_nproc = 5,
+ .vs_proc = nfsd_acl_procedures2,
+ .vs_count = nfsd_acl_count2,
+ .vs_dispatch = nfsd_dispatch,
+ .vs_xdrsize = NFS3_SVC_XDRSIZE,
};
diff --git a/fs/nfsd/nfs3acl.c b/fs/nfsd/nfs3acl.c
index dcb5f79..0197652 100644
--- a/fs/nfsd/nfs3acl.c
+++ b/fs/nfsd/nfs3acl.c
@@ -18,7 +18,7 @@
* NULL call.
*/
static __be32
-nfsd3_proc_null(struct svc_rqst *rqstp, void *argp, void *resp)
+nfsd3_proc_null(struct svc_rqst *rqstp)
{
return nfs_ok;
}
@@ -26,9 +26,10 @@
/*
* Get the Access and/or Default ACL of a file.
*/
-static __be32 nfsd3_proc_getacl(struct svc_rqst * rqstp,
- struct nfsd3_getaclargs *argp, struct nfsd3_getaclres *resp)
+static __be32 nfsd3_proc_getacl(struct svc_rqst *rqstp)
{
+ struct nfsd3_getaclargs *argp = rqstp->rq_argp;
+ struct nfsd3_getaclres *resp = rqstp->rq_resp;
struct posix_acl *acl;
struct inode *inode;
svc_fh *fh;
@@ -80,10 +81,10 @@
/*
* Set the Access and/or Default ACL of a file.
*/
-static __be32 nfsd3_proc_setacl(struct svc_rqst * rqstp,
- struct nfsd3_setaclargs *argp,
- struct nfsd3_attrstat *resp)
+static __be32 nfsd3_proc_setacl(struct svc_rqst *rqstp)
{
+ struct nfsd3_setaclargs *argp = rqstp->rq_argp;
+ struct nfsd3_attrstat *resp = rqstp->rq_resp;
struct inode *inode;
svc_fh *fh;
__be32 nfserr = 0;
@@ -123,9 +124,10 @@
/*
* XDR decode functions
*/
-static int nfs3svc_decode_getaclargs(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_getaclargs *args)
+static int nfs3svc_decode_getaclargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd3_getaclargs *args = rqstp->rq_argp;
+
p = nfs3svc_decode_fh(p, &args->fh);
if (!p)
return 0;
@@ -135,9 +137,9 @@
}
-static int nfs3svc_decode_setaclargs(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_setaclargs *args)
+static int nfs3svc_decode_setaclargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd3_setaclargs *args = rqstp->rq_argp;
struct kvec *head = rqstp->rq_arg.head;
unsigned int base;
int n;
@@ -166,9 +168,9 @@
*/
/* GETACL */
-static int nfs3svc_encode_getaclres(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_getaclres *resp)
+static int nfs3svc_encode_getaclres(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd3_getaclres *resp = rqstp->rq_resp;
struct dentry *dentry = resp->fh.fh_dentry;
p = nfs3svc_encode_post_op_attr(rqstp, p, &resp->fh);
@@ -211,9 +213,10 @@
}
/* SETACL */
-static int nfs3svc_encode_setaclres(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_attrstat *resp)
+static int nfs3svc_encode_setaclres(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd3_attrstat *resp = rqstp->rq_resp;
+
p = nfs3svc_encode_post_op_attr(rqstp, p, &resp->fh);
return xdr_ressize_check(rqstp, p);
@@ -222,13 +225,13 @@
/*
* XDR release functions
*/
-static int nfs3svc_release_getacl(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_getaclres *resp)
+static void nfs3svc_release_getacl(struct svc_rqst *rqstp)
{
+ struct nfsd3_getaclres *resp = rqstp->rq_resp;
+
fh_put(&resp->fh);
posix_acl_release(resp->acl_access);
posix_acl_release(resp->acl_default);
- return 1;
}
#define nfs3svc_decode_voidargs NULL
@@ -237,34 +240,36 @@
#define nfsd3_voidres nfsd3_voidargs
struct nfsd3_voidargs { int dummy; };
-#define PROC(name, argt, rest, relt, cache, respsize) \
- { (svc_procfunc) nfsd3_proc_##name, \
- (kxdrproc_t) nfs3svc_decode_##argt##args, \
- (kxdrproc_t) nfs3svc_encode_##rest##res, \
- (kxdrproc_t) nfs3svc_release_##relt, \
- sizeof(struct nfsd3_##argt##args), \
- sizeof(struct nfsd3_##rest##res), \
- 0, \
- cache, \
- respsize, \
- }
+#define PROC(name, argt, rest, relt, cache, respsize) \
+{ \
+ .pc_func = nfsd3_proc_##name, \
+ .pc_decode = nfs3svc_decode_##argt##args, \
+ .pc_encode = nfs3svc_encode_##rest##res, \
+ .pc_release = nfs3svc_release_##relt, \
+ .pc_argsize = sizeof(struct nfsd3_##argt##args), \
+ .pc_ressize = sizeof(struct nfsd3_##rest##res), \
+ .pc_cachetype = cache, \
+ .pc_xdrressize = respsize, \
+}
#define ST 1 /* status*/
#define AT 21 /* attributes */
#define pAT (1+AT) /* post attributes - conditional */
#define ACL (1+NFS_ACL_MAX_ENTRIES*3) /* Access Control List */
-static struct svc_procedure nfsd_acl_procedures3[] = {
+static const struct svc_procedure nfsd_acl_procedures3[] = {
PROC(null, void, void, void, RC_NOCACHE, ST),
PROC(getacl, getacl, getacl, getacl, RC_NOCACHE, ST+1+2*(1+ACL)),
PROC(setacl, setacl, setacl, fhandle, RC_NOCACHE, ST+pAT),
};
-struct svc_version nfsd_acl_version3 = {
- .vs_vers = 3,
- .vs_nproc = 3,
- .vs_proc = nfsd_acl_procedures3,
- .vs_dispatch = nfsd_dispatch,
- .vs_xdrsize = NFS3_SVC_XDRSIZE,
+static unsigned int nfsd_acl_count3[ARRAY_SIZE(nfsd_acl_procedures3)];
+const struct svc_version nfsd_acl_version3 = {
+ .vs_vers = 3,
+ .vs_nproc = 3,
+ .vs_proc = nfsd_acl_procedures3,
+ .vs_count = nfsd_acl_count3,
+ .vs_dispatch = nfsd_dispatch,
+ .vs_xdrsize = NFS3_SVC_XDRSIZE,
};
diff --git a/fs/nfsd/nfs3proc.c b/fs/nfsd/nfs3proc.c
index 045c908..2cb56a0 100644
--- a/fs/nfsd/nfs3proc.c
+++ b/fs/nfsd/nfs3proc.c
@@ -31,7 +31,7 @@
* NULL call.
*/
static __be32
-nfsd3_proc_null(struct svc_rqst *rqstp, void *argp, void *resp)
+nfsd3_proc_null(struct svc_rqst *rqstp)
{
return nfs_ok;
}
@@ -40,9 +40,10 @@
* Get a file's attributes
*/
static __be32
-nfsd3_proc_getattr(struct svc_rqst *rqstp, struct nfsd_fhandle *argp,
- struct nfsd3_attrstat *resp)
+nfsd3_proc_getattr(struct svc_rqst *rqstp)
{
+ struct nfsd_fhandle *argp = rqstp->rq_argp;
+ struct nfsd3_attrstat *resp = rqstp->rq_resp;
__be32 nfserr;
dprintk("nfsd: GETATTR(3) %s\n",
@@ -63,9 +64,10 @@
* Set a file's attributes
*/
static __be32
-nfsd3_proc_setattr(struct svc_rqst *rqstp, struct nfsd3_sattrargs *argp,
- struct nfsd3_attrstat *resp)
+nfsd3_proc_setattr(struct svc_rqst *rqstp)
{
+ struct nfsd3_sattrargs *argp = rqstp->rq_argp;
+ struct nfsd3_attrstat *resp = rqstp->rq_resp;
__be32 nfserr;
dprintk("nfsd: SETATTR(3) %s\n",
@@ -81,9 +83,10 @@
* Look up a path name component
*/
static __be32
-nfsd3_proc_lookup(struct svc_rqst *rqstp, struct nfsd3_diropargs *argp,
- struct nfsd3_diropres *resp)
+nfsd3_proc_lookup(struct svc_rqst *rqstp)
{
+ struct nfsd3_diropargs *argp = rqstp->rq_argp;
+ struct nfsd3_diropres *resp = rqstp->rq_resp;
__be32 nfserr;
dprintk("nfsd: LOOKUP(3) %s %.*s\n",
@@ -105,9 +108,10 @@
* Check file access
*/
static __be32
-nfsd3_proc_access(struct svc_rqst *rqstp, struct nfsd3_accessargs *argp,
- struct nfsd3_accessres *resp)
+nfsd3_proc_access(struct svc_rqst *rqstp)
{
+ struct nfsd3_accessargs *argp = rqstp->rq_argp;
+ struct nfsd3_accessres *resp = rqstp->rq_resp;
__be32 nfserr;
dprintk("nfsd: ACCESS(3) %s 0x%x\n",
@@ -124,9 +128,10 @@
* Read a symlink.
*/
static __be32
-nfsd3_proc_readlink(struct svc_rqst *rqstp, struct nfsd3_readlinkargs *argp,
- struct nfsd3_readlinkres *resp)
+nfsd3_proc_readlink(struct svc_rqst *rqstp)
{
+ struct nfsd3_readlinkargs *argp = rqstp->rq_argp;
+ struct nfsd3_readlinkres *resp = rqstp->rq_resp;
__be32 nfserr;
dprintk("nfsd: READLINK(3) %s\n", SVCFH_fmt(&argp->fh));
@@ -142,9 +147,10 @@
* Read a portion of a file.
*/
static __be32
-nfsd3_proc_read(struct svc_rqst *rqstp, struct nfsd3_readargs *argp,
- struct nfsd3_readres *resp)
+nfsd3_proc_read(struct svc_rqst *rqstp)
{
+ struct nfsd3_readargs *argp = rqstp->rq_argp;
+ struct nfsd3_readres *resp = rqstp->rq_resp;
__be32 nfserr;
u32 max_blocksize = svc_max_payload(rqstp);
unsigned long cnt = min(argp->count, max_blocksize);
@@ -179,9 +185,10 @@
* Write data to a file
*/
static __be32
-nfsd3_proc_write(struct svc_rqst *rqstp, struct nfsd3_writeargs *argp,
- struct nfsd3_writeres *resp)
+nfsd3_proc_write(struct svc_rqst *rqstp)
{
+ struct nfsd3_writeargs *argp = rqstp->rq_argp;
+ struct nfsd3_writeres *resp = rqstp->rq_resp;
__be32 nfserr;
unsigned long cnt = argp->len;
@@ -206,9 +213,10 @@
* first reports about SunOS compatibility problems start to pour in...
*/
static __be32
-nfsd3_proc_create(struct svc_rqst *rqstp, struct nfsd3_createargs *argp,
- struct nfsd3_diropres *resp)
+nfsd3_proc_create(struct svc_rqst *rqstp)
{
+ struct nfsd3_createargs *argp = rqstp->rq_argp;
+ struct nfsd3_diropres *resp = rqstp->rq_resp;
svc_fh *dirfhp, *newfhp = NULL;
struct iattr *attr;
__be32 nfserr;
@@ -243,9 +251,10 @@
* Make directory. This operation is not idempotent.
*/
static __be32
-nfsd3_proc_mkdir(struct svc_rqst *rqstp, struct nfsd3_createargs *argp,
- struct nfsd3_diropres *resp)
+nfsd3_proc_mkdir(struct svc_rqst *rqstp)
{
+ struct nfsd3_createargs *argp = rqstp->rq_argp;
+ struct nfsd3_diropres *resp = rqstp->rq_resp;
__be32 nfserr;
dprintk("nfsd: MKDIR(3) %s %.*s\n",
@@ -263,9 +272,10 @@
}
static __be32
-nfsd3_proc_symlink(struct svc_rqst *rqstp, struct nfsd3_symlinkargs *argp,
- struct nfsd3_diropres *resp)
+nfsd3_proc_symlink(struct svc_rqst *rqstp)
{
+ struct nfsd3_symlinkargs *argp = rqstp->rq_argp;
+ struct nfsd3_diropres *resp = rqstp->rq_resp;
__be32 nfserr;
dprintk("nfsd: SYMLINK(3) %s %.*s -> %.*s\n",
@@ -284,9 +294,10 @@
* Make socket/fifo/device.
*/
static __be32
-nfsd3_proc_mknod(struct svc_rqst *rqstp, struct nfsd3_mknodargs *argp,
- struct nfsd3_diropres *resp)
+nfsd3_proc_mknod(struct svc_rqst *rqstp)
{
+ struct nfsd3_mknodargs *argp = rqstp->rq_argp;
+ struct nfsd3_diropres *resp = rqstp->rq_resp;
__be32 nfserr;
int type;
dev_t rdev = 0;
@@ -321,9 +332,10 @@
* Remove file/fifo/socket etc.
*/
static __be32
-nfsd3_proc_remove(struct svc_rqst *rqstp, struct nfsd3_diropargs *argp,
- struct nfsd3_attrstat *resp)
+nfsd3_proc_remove(struct svc_rqst *rqstp)
{
+ struct nfsd3_diropargs *argp = rqstp->rq_argp;
+ struct nfsd3_attrstat *resp = rqstp->rq_resp;
__be32 nfserr;
dprintk("nfsd: REMOVE(3) %s %.*s\n",
@@ -342,9 +354,10 @@
* Remove a directory
*/
static __be32
-nfsd3_proc_rmdir(struct svc_rqst *rqstp, struct nfsd3_diropargs *argp,
- struct nfsd3_attrstat *resp)
+nfsd3_proc_rmdir(struct svc_rqst *rqstp)
{
+ struct nfsd3_diropargs *argp = rqstp->rq_argp;
+ struct nfsd3_attrstat *resp = rqstp->rq_resp;
__be32 nfserr;
dprintk("nfsd: RMDIR(3) %s %.*s\n",
@@ -359,9 +372,10 @@
}
static __be32
-nfsd3_proc_rename(struct svc_rqst *rqstp, struct nfsd3_renameargs *argp,
- struct nfsd3_renameres *resp)
+nfsd3_proc_rename(struct svc_rqst *rqstp)
{
+ struct nfsd3_renameargs *argp = rqstp->rq_argp;
+ struct nfsd3_renameres *resp = rqstp->rq_resp;
__be32 nfserr;
dprintk("nfsd: RENAME(3) %s %.*s ->\n",
@@ -381,9 +395,10 @@
}
static __be32
-nfsd3_proc_link(struct svc_rqst *rqstp, struct nfsd3_linkargs *argp,
- struct nfsd3_linkres *resp)
+nfsd3_proc_link(struct svc_rqst *rqstp)
{
+ struct nfsd3_linkargs *argp = rqstp->rq_argp;
+ struct nfsd3_linkres *resp = rqstp->rq_resp;
__be32 nfserr;
dprintk("nfsd: LINK(3) %s ->\n",
@@ -404,9 +419,10 @@
* Read a portion of a directory.
*/
static __be32
-nfsd3_proc_readdir(struct svc_rqst *rqstp, struct nfsd3_readdirargs *argp,
- struct nfsd3_readdirres *resp)
+nfsd3_proc_readdir(struct svc_rqst *rqstp)
{
+ struct nfsd3_readdirargs *argp = rqstp->rq_argp;
+ struct nfsd3_readdirres *resp = rqstp->rq_resp;
__be32 nfserr;
int count;
@@ -440,9 +456,10 @@
* For now, we choose to ignore the dircount parameter.
*/
static __be32
-nfsd3_proc_readdirplus(struct svc_rqst *rqstp, struct nfsd3_readdirargs *argp,
- struct nfsd3_readdirres *resp)
+nfsd3_proc_readdirplus(struct svc_rqst *rqstp)
{
+ struct nfsd3_readdirargs *argp = rqstp->rq_argp;
+ struct nfsd3_readdirres *resp = rqstp->rq_resp;
__be32 nfserr;
int count = 0;
loff_t offset;
@@ -507,9 +524,10 @@
* Get file system stats
*/
static __be32
-nfsd3_proc_fsstat(struct svc_rqst * rqstp, struct nfsd_fhandle *argp,
- struct nfsd3_fsstatres *resp)
+nfsd3_proc_fsstat(struct svc_rqst *rqstp)
{
+ struct nfsd_fhandle *argp = rqstp->rq_argp;
+ struct nfsd3_fsstatres *resp = rqstp->rq_resp;
__be32 nfserr;
dprintk("nfsd: FSSTAT(3) %s\n",
@@ -524,9 +542,10 @@
* Get file system info
*/
static __be32
-nfsd3_proc_fsinfo(struct svc_rqst * rqstp, struct nfsd_fhandle *argp,
- struct nfsd3_fsinfores *resp)
+nfsd3_proc_fsinfo(struct svc_rqst *rqstp)
{
+ struct nfsd_fhandle *argp = rqstp->rq_argp;
+ struct nfsd3_fsinfores *resp = rqstp->rq_resp;
__be32 nfserr;
u32 max_blocksize = svc_max_payload(rqstp);
@@ -567,9 +586,10 @@
* Get pathconf info for the specified file
*/
static __be32
-nfsd3_proc_pathconf(struct svc_rqst * rqstp, struct nfsd_fhandle *argp,
- struct nfsd3_pathconfres *resp)
+nfsd3_proc_pathconf(struct svc_rqst *rqstp)
{
+ struct nfsd_fhandle *argp = rqstp->rq_argp;
+ struct nfsd3_pathconfres *resp = rqstp->rq_resp;
__be32 nfserr;
dprintk("nfsd: PATHCONF(3) %s\n",
@@ -610,9 +630,10 @@
* Commit a file (range) to stable storage.
*/
static __be32
-nfsd3_proc_commit(struct svc_rqst * rqstp, struct nfsd3_commitargs *argp,
- struct nfsd3_commitres *resp)
+nfsd3_proc_commit(struct svc_rqst *rqstp)
{
+ struct nfsd3_commitargs *argp = rqstp->rq_argp;
+ struct nfsd3_commitres *resp = rqstp->rq_resp;
__be32 nfserr;
dprintk("nfsd: COMMIT(3) %s %u@%Lu\n",
@@ -647,233 +668,221 @@
#define nfsd3_voidres nfsd3_voidargs
struct nfsd3_voidargs { int dummy; };
-#define PROC(name, argt, rest, relt, cache, respsize) \
- { (svc_procfunc) nfsd3_proc_##name, \
- (kxdrproc_t) nfs3svc_decode_##argt##args, \
- (kxdrproc_t) nfs3svc_encode_##rest##res, \
- (kxdrproc_t) nfs3svc_release_##relt, \
- sizeof(struct nfsd3_##argt##args), \
- sizeof(struct nfsd3_##rest##res), \
- 0, \
- cache, \
- respsize, \
- }
-
#define ST 1 /* status*/
#define FH 17 /* filehandle with length */
#define AT 21 /* attributes */
#define pAT (1+AT) /* post attributes - conditional */
#define WC (7+pAT) /* WCC attributes */
-static struct svc_procedure nfsd_procedures3[22] = {
+static const struct svc_procedure nfsd_procedures3[22] = {
[NFS3PROC_NULL] = {
- .pc_func = (svc_procfunc) nfsd3_proc_null,
- .pc_encode = (kxdrproc_t) nfs3svc_encode_voidres,
+ .pc_func = nfsd3_proc_null,
+ .pc_encode = nfs3svc_encode_voidres,
.pc_argsize = sizeof(struct nfsd3_voidargs),
.pc_ressize = sizeof(struct nfsd3_voidres),
.pc_cachetype = RC_NOCACHE,
.pc_xdrressize = ST,
},
[NFS3PROC_GETATTR] = {
- .pc_func = (svc_procfunc) nfsd3_proc_getattr,
- .pc_decode = (kxdrproc_t) nfs3svc_decode_fhandleargs,
- .pc_encode = (kxdrproc_t) nfs3svc_encode_attrstatres,
- .pc_release = (kxdrproc_t) nfs3svc_release_fhandle,
+ .pc_func = nfsd3_proc_getattr,
+ .pc_decode = nfs3svc_decode_fhandleargs,
+ .pc_encode = nfs3svc_encode_attrstatres,
+ .pc_release = nfs3svc_release_fhandle,
.pc_argsize = sizeof(struct nfsd3_fhandleargs),
.pc_ressize = sizeof(struct nfsd3_attrstatres),
.pc_cachetype = RC_NOCACHE,
.pc_xdrressize = ST+AT,
},
[NFS3PROC_SETATTR] = {
- .pc_func = (svc_procfunc) nfsd3_proc_setattr,
- .pc_decode = (kxdrproc_t) nfs3svc_decode_sattrargs,
- .pc_encode = (kxdrproc_t) nfs3svc_encode_wccstatres,
- .pc_release = (kxdrproc_t) nfs3svc_release_fhandle,
+ .pc_func = nfsd3_proc_setattr,
+ .pc_decode = nfs3svc_decode_sattrargs,
+ .pc_encode = nfs3svc_encode_wccstatres,
+ .pc_release = nfs3svc_release_fhandle,
.pc_argsize = sizeof(struct nfsd3_sattrargs),
.pc_ressize = sizeof(struct nfsd3_wccstatres),
.pc_cachetype = RC_REPLBUFF,
.pc_xdrressize = ST+WC,
},
[NFS3PROC_LOOKUP] = {
- .pc_func = (svc_procfunc) nfsd3_proc_lookup,
- .pc_decode = (kxdrproc_t) nfs3svc_decode_diropargs,
- .pc_encode = (kxdrproc_t) nfs3svc_encode_diropres,
- .pc_release = (kxdrproc_t) nfs3svc_release_fhandle2,
+ .pc_func = nfsd3_proc_lookup,
+ .pc_decode = nfs3svc_decode_diropargs,
+ .pc_encode = nfs3svc_encode_diropres,
+ .pc_release = nfs3svc_release_fhandle2,
.pc_argsize = sizeof(struct nfsd3_diropargs),
.pc_ressize = sizeof(struct nfsd3_diropres),
.pc_cachetype = RC_NOCACHE,
.pc_xdrressize = ST+FH+pAT+pAT,
},
[NFS3PROC_ACCESS] = {
- .pc_func = (svc_procfunc) nfsd3_proc_access,
- .pc_decode = (kxdrproc_t) nfs3svc_decode_accessargs,
- .pc_encode = (kxdrproc_t) nfs3svc_encode_accessres,
- .pc_release = (kxdrproc_t) nfs3svc_release_fhandle,
+ .pc_func = nfsd3_proc_access,
+ .pc_decode = nfs3svc_decode_accessargs,
+ .pc_encode = nfs3svc_encode_accessres,
+ .pc_release = nfs3svc_release_fhandle,
.pc_argsize = sizeof(struct nfsd3_accessargs),
.pc_ressize = sizeof(struct nfsd3_accessres),
.pc_cachetype = RC_NOCACHE,
.pc_xdrressize = ST+pAT+1,
},
[NFS3PROC_READLINK] = {
- .pc_func = (svc_procfunc) nfsd3_proc_readlink,
- .pc_decode = (kxdrproc_t) nfs3svc_decode_readlinkargs,
- .pc_encode = (kxdrproc_t) nfs3svc_encode_readlinkres,
- .pc_release = (kxdrproc_t) nfs3svc_release_fhandle,
+ .pc_func = nfsd3_proc_readlink,
+ .pc_decode = nfs3svc_decode_readlinkargs,
+ .pc_encode = nfs3svc_encode_readlinkres,
+ .pc_release = nfs3svc_release_fhandle,
.pc_argsize = sizeof(struct nfsd3_readlinkargs),
.pc_ressize = sizeof(struct nfsd3_readlinkres),
.pc_cachetype = RC_NOCACHE,
.pc_xdrressize = ST+pAT+1+NFS3_MAXPATHLEN/4,
},
[NFS3PROC_READ] = {
- .pc_func = (svc_procfunc) nfsd3_proc_read,
- .pc_decode = (kxdrproc_t) nfs3svc_decode_readargs,
- .pc_encode = (kxdrproc_t) nfs3svc_encode_readres,
- .pc_release = (kxdrproc_t) nfs3svc_release_fhandle,
+ .pc_func = nfsd3_proc_read,
+ .pc_decode = nfs3svc_decode_readargs,
+ .pc_encode = nfs3svc_encode_readres,
+ .pc_release = nfs3svc_release_fhandle,
.pc_argsize = sizeof(struct nfsd3_readargs),
.pc_ressize = sizeof(struct nfsd3_readres),
.pc_cachetype = RC_NOCACHE,
.pc_xdrressize = ST+pAT+4+NFSSVC_MAXBLKSIZE/4,
},
[NFS3PROC_WRITE] = {
- .pc_func = (svc_procfunc) nfsd3_proc_write,
- .pc_decode = (kxdrproc_t) nfs3svc_decode_writeargs,
- .pc_encode = (kxdrproc_t) nfs3svc_encode_writeres,
- .pc_release = (kxdrproc_t) nfs3svc_release_fhandle,
+ .pc_func = nfsd3_proc_write,
+ .pc_decode = nfs3svc_decode_writeargs,
+ .pc_encode = nfs3svc_encode_writeres,
+ .pc_release = nfs3svc_release_fhandle,
.pc_argsize = sizeof(struct nfsd3_writeargs),
.pc_ressize = sizeof(struct nfsd3_writeres),
.pc_cachetype = RC_REPLBUFF,
.pc_xdrressize = ST+WC+4,
},
[NFS3PROC_CREATE] = {
- .pc_func = (svc_procfunc) nfsd3_proc_create,
- .pc_decode = (kxdrproc_t) nfs3svc_decode_createargs,
- .pc_encode = (kxdrproc_t) nfs3svc_encode_createres,
- .pc_release = (kxdrproc_t) nfs3svc_release_fhandle2,
+ .pc_func = nfsd3_proc_create,
+ .pc_decode = nfs3svc_decode_createargs,
+ .pc_encode = nfs3svc_encode_createres,
+ .pc_release = nfs3svc_release_fhandle2,
.pc_argsize = sizeof(struct nfsd3_createargs),
.pc_ressize = sizeof(struct nfsd3_createres),
.pc_cachetype = RC_REPLBUFF,
.pc_xdrressize = ST+(1+FH+pAT)+WC,
},
[NFS3PROC_MKDIR] = {
- .pc_func = (svc_procfunc) nfsd3_proc_mkdir,
- .pc_decode = (kxdrproc_t) nfs3svc_decode_mkdirargs,
- .pc_encode = (kxdrproc_t) nfs3svc_encode_createres,
- .pc_release = (kxdrproc_t) nfs3svc_release_fhandle2,
+ .pc_func = nfsd3_proc_mkdir,
+ .pc_decode = nfs3svc_decode_mkdirargs,
+ .pc_encode = nfs3svc_encode_createres,
+ .pc_release = nfs3svc_release_fhandle2,
.pc_argsize = sizeof(struct nfsd3_mkdirargs),
.pc_ressize = sizeof(struct nfsd3_createres),
.pc_cachetype = RC_REPLBUFF,
.pc_xdrressize = ST+(1+FH+pAT)+WC,
},
[NFS3PROC_SYMLINK] = {
- .pc_func = (svc_procfunc) nfsd3_proc_symlink,
- .pc_decode = (kxdrproc_t) nfs3svc_decode_symlinkargs,
- .pc_encode = (kxdrproc_t) nfs3svc_encode_createres,
- .pc_release = (kxdrproc_t) nfs3svc_release_fhandle2,
+ .pc_func = nfsd3_proc_symlink,
+ .pc_decode = nfs3svc_decode_symlinkargs,
+ .pc_encode = nfs3svc_encode_createres,
+ .pc_release = nfs3svc_release_fhandle2,
.pc_argsize = sizeof(struct nfsd3_symlinkargs),
.pc_ressize = sizeof(struct nfsd3_createres),
.pc_cachetype = RC_REPLBUFF,
.pc_xdrressize = ST+(1+FH+pAT)+WC,
},
[NFS3PROC_MKNOD] = {
- .pc_func = (svc_procfunc) nfsd3_proc_mknod,
- .pc_decode = (kxdrproc_t) nfs3svc_decode_mknodargs,
- .pc_encode = (kxdrproc_t) nfs3svc_encode_createres,
- .pc_release = (kxdrproc_t) nfs3svc_release_fhandle2,
+ .pc_func = nfsd3_proc_mknod,
+ .pc_decode = nfs3svc_decode_mknodargs,
+ .pc_encode = nfs3svc_encode_createres,
+ .pc_release = nfs3svc_release_fhandle2,
.pc_argsize = sizeof(struct nfsd3_mknodargs),
.pc_ressize = sizeof(struct nfsd3_createres),
.pc_cachetype = RC_REPLBUFF,
.pc_xdrressize = ST+(1+FH+pAT)+WC,
},
[NFS3PROC_REMOVE] = {
- .pc_func = (svc_procfunc) nfsd3_proc_remove,
- .pc_decode = (kxdrproc_t) nfs3svc_decode_diropargs,
- .pc_encode = (kxdrproc_t) nfs3svc_encode_wccstatres,
- .pc_release = (kxdrproc_t) nfs3svc_release_fhandle,
+ .pc_func = nfsd3_proc_remove,
+ .pc_decode = nfs3svc_decode_diropargs,
+ .pc_encode = nfs3svc_encode_wccstatres,
+ .pc_release = nfs3svc_release_fhandle,
.pc_argsize = sizeof(struct nfsd3_diropargs),
.pc_ressize = sizeof(struct nfsd3_wccstatres),
.pc_cachetype = RC_REPLBUFF,
.pc_xdrressize = ST+WC,
},
[NFS3PROC_RMDIR] = {
- .pc_func = (svc_procfunc) nfsd3_proc_rmdir,
- .pc_decode = (kxdrproc_t) nfs3svc_decode_diropargs,
- .pc_encode = (kxdrproc_t) nfs3svc_encode_wccstatres,
- .pc_release = (kxdrproc_t) nfs3svc_release_fhandle,
+ .pc_func = nfsd3_proc_rmdir,
+ .pc_decode = nfs3svc_decode_diropargs,
+ .pc_encode = nfs3svc_encode_wccstatres,
+ .pc_release = nfs3svc_release_fhandle,
.pc_argsize = sizeof(struct nfsd3_diropargs),
.pc_ressize = sizeof(struct nfsd3_wccstatres),
.pc_cachetype = RC_REPLBUFF,
.pc_xdrressize = ST+WC,
},
[NFS3PROC_RENAME] = {
- .pc_func = (svc_procfunc) nfsd3_proc_rename,
- .pc_decode = (kxdrproc_t) nfs3svc_decode_renameargs,
- .pc_encode = (kxdrproc_t) nfs3svc_encode_renameres,
- .pc_release = (kxdrproc_t) nfs3svc_release_fhandle2,
+ .pc_func = nfsd3_proc_rename,
+ .pc_decode = nfs3svc_decode_renameargs,
+ .pc_encode = nfs3svc_encode_renameres,
+ .pc_release = nfs3svc_release_fhandle2,
.pc_argsize = sizeof(struct nfsd3_renameargs),
.pc_ressize = sizeof(struct nfsd3_renameres),
.pc_cachetype = RC_REPLBUFF,
.pc_xdrressize = ST+WC+WC,
},
[NFS3PROC_LINK] = {
- .pc_func = (svc_procfunc) nfsd3_proc_link,
- .pc_decode = (kxdrproc_t) nfs3svc_decode_linkargs,
- .pc_encode = (kxdrproc_t) nfs3svc_encode_linkres,
- .pc_release = (kxdrproc_t) nfs3svc_release_fhandle2,
+ .pc_func = nfsd3_proc_link,
+ .pc_decode = nfs3svc_decode_linkargs,
+ .pc_encode = nfs3svc_encode_linkres,
+ .pc_release = nfs3svc_release_fhandle2,
.pc_argsize = sizeof(struct nfsd3_linkargs),
.pc_ressize = sizeof(struct nfsd3_linkres),
.pc_cachetype = RC_REPLBUFF,
.pc_xdrressize = ST+pAT+WC,
},
[NFS3PROC_READDIR] = {
- .pc_func = (svc_procfunc) nfsd3_proc_readdir,
- .pc_decode = (kxdrproc_t) nfs3svc_decode_readdirargs,
- .pc_encode = (kxdrproc_t) nfs3svc_encode_readdirres,
- .pc_release = (kxdrproc_t) nfs3svc_release_fhandle,
+ .pc_func = nfsd3_proc_readdir,
+ .pc_decode = nfs3svc_decode_readdirargs,
+ .pc_encode = nfs3svc_encode_readdirres,
+ .pc_release = nfs3svc_release_fhandle,
.pc_argsize = sizeof(struct nfsd3_readdirargs),
.pc_ressize = sizeof(struct nfsd3_readdirres),
.pc_cachetype = RC_NOCACHE,
},
[NFS3PROC_READDIRPLUS] = {
- .pc_func = (svc_procfunc) nfsd3_proc_readdirplus,
- .pc_decode = (kxdrproc_t) nfs3svc_decode_readdirplusargs,
- .pc_encode = (kxdrproc_t) nfs3svc_encode_readdirres,
- .pc_release = (kxdrproc_t) nfs3svc_release_fhandle,
+ .pc_func = nfsd3_proc_readdirplus,
+ .pc_decode = nfs3svc_decode_readdirplusargs,
+ .pc_encode = nfs3svc_encode_readdirres,
+ .pc_release = nfs3svc_release_fhandle,
.pc_argsize = sizeof(struct nfsd3_readdirplusargs),
.pc_ressize = sizeof(struct nfsd3_readdirres),
.pc_cachetype = RC_NOCACHE,
},
[NFS3PROC_FSSTAT] = {
- .pc_func = (svc_procfunc) nfsd3_proc_fsstat,
- .pc_decode = (kxdrproc_t) nfs3svc_decode_fhandleargs,
- .pc_encode = (kxdrproc_t) nfs3svc_encode_fsstatres,
+ .pc_func = nfsd3_proc_fsstat,
+ .pc_decode = nfs3svc_decode_fhandleargs,
+ .pc_encode = nfs3svc_encode_fsstatres,
.pc_argsize = sizeof(struct nfsd3_fhandleargs),
.pc_ressize = sizeof(struct nfsd3_fsstatres),
.pc_cachetype = RC_NOCACHE,
.pc_xdrressize = ST+pAT+2*6+1,
},
[NFS3PROC_FSINFO] = {
- .pc_func = (svc_procfunc) nfsd3_proc_fsinfo,
- .pc_decode = (kxdrproc_t) nfs3svc_decode_fhandleargs,
- .pc_encode = (kxdrproc_t) nfs3svc_encode_fsinfores,
+ .pc_func = nfsd3_proc_fsinfo,
+ .pc_decode = nfs3svc_decode_fhandleargs,
+ .pc_encode = nfs3svc_encode_fsinfores,
.pc_argsize = sizeof(struct nfsd3_fhandleargs),
.pc_ressize = sizeof(struct nfsd3_fsinfores),
.pc_cachetype = RC_NOCACHE,
.pc_xdrressize = ST+pAT+12,
},
[NFS3PROC_PATHCONF] = {
- .pc_func = (svc_procfunc) nfsd3_proc_pathconf,
- .pc_decode = (kxdrproc_t) nfs3svc_decode_fhandleargs,
- .pc_encode = (kxdrproc_t) nfs3svc_encode_pathconfres,
+ .pc_func = nfsd3_proc_pathconf,
+ .pc_decode = nfs3svc_decode_fhandleargs,
+ .pc_encode = nfs3svc_encode_pathconfres,
.pc_argsize = sizeof(struct nfsd3_fhandleargs),
.pc_ressize = sizeof(struct nfsd3_pathconfres),
.pc_cachetype = RC_NOCACHE,
.pc_xdrressize = ST+pAT+6,
},
[NFS3PROC_COMMIT] = {
- .pc_func = (svc_procfunc) nfsd3_proc_commit,
- .pc_decode = (kxdrproc_t) nfs3svc_decode_commitargs,
- .pc_encode = (kxdrproc_t) nfs3svc_encode_commitres,
- .pc_release = (kxdrproc_t) nfs3svc_release_fhandle,
+ .pc_func = nfsd3_proc_commit,
+ .pc_decode = nfs3svc_decode_commitargs,
+ .pc_encode = nfs3svc_encode_commitres,
+ .pc_release = nfs3svc_release_fhandle,
.pc_argsize = sizeof(struct nfsd3_commitargs),
.pc_ressize = sizeof(struct nfsd3_commitres),
.pc_cachetype = RC_NOCACHE,
@@ -881,10 +890,12 @@
},
};
-struct svc_version nfsd_version3 = {
- .vs_vers = 3,
- .vs_nproc = 22,
- .vs_proc = nfsd_procedures3,
- .vs_dispatch = nfsd_dispatch,
- .vs_xdrsize = NFS3_SVC_XDRSIZE,
+static unsigned int nfsd_count3[ARRAY_SIZE(nfsd_procedures3)];
+const struct svc_version nfsd_version3 = {
+ .vs_vers = 3,
+ .vs_nproc = 22,
+ .vs_proc = nfsd_procedures3,
+ .vs_dispatch = nfsd_dispatch,
+ .vs_count = nfsd_count3,
+ .vs_xdrsize = NFS3_SVC_XDRSIZE,
};
diff --git a/fs/nfsd/nfs3xdr.c b/fs/nfsd/nfs3xdr.c
index 4523346..bf444b6 100644
--- a/fs/nfsd/nfs3xdr.c
+++ b/fs/nfsd/nfs3xdr.c
@@ -260,7 +260,7 @@
printk("nfsd: inode locked twice during operation.\n");
err = fh_getattr(fhp, &fhp->fh_post_attr);
- fhp->fh_post_change = d_inode(fhp->fh_dentry)->i_version;
+ fhp->fh_post_change = nfsd4_change_attribute(d_inode(fhp->fh_dentry));
if (err) {
fhp->fh_post_saved = false;
/* Grab the ctime anyway - set_change_info might use it */
@@ -273,8 +273,10 @@
* XDR decode functions
*/
int
-nfs3svc_decode_fhandle(struct svc_rqst *rqstp, __be32 *p, struct nfsd_fhandle *args)
+nfs3svc_decode_fhandle(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd_fhandle *args = rqstp->rq_argp;
+
p = decode_fh(p, &args->fh);
if (!p)
return 0;
@@ -282,9 +284,10 @@
}
int
-nfs3svc_decode_sattrargs(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_sattrargs *args)
+nfs3svc_decode_sattrargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd3_sattrargs *args = rqstp->rq_argp;
+
p = decode_fh(p, &args->fh);
if (!p)
return 0;
@@ -300,9 +303,10 @@
}
int
-nfs3svc_decode_diropargs(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_diropargs *args)
+nfs3svc_decode_diropargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd3_diropargs *args = rqstp->rq_argp;
+
if (!(p = decode_fh(p, &args->fh))
|| !(p = decode_filename(p, &args->name, &args->len)))
return 0;
@@ -311,9 +315,10 @@
}
int
-nfs3svc_decode_accessargs(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_accessargs *args)
+nfs3svc_decode_accessargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd3_accessargs *args = rqstp->rq_argp;
+
p = decode_fh(p, &args->fh);
if (!p)
return 0;
@@ -323,9 +328,9 @@
}
int
-nfs3svc_decode_readargs(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_readargs *args)
+nfs3svc_decode_readargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd3_readargs *args = rqstp->rq_argp;
unsigned int len;
int v;
u32 max_blocksize = svc_max_payload(rqstp);
@@ -353,9 +358,9 @@
}
int
-nfs3svc_decode_writeargs(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_writeargs *args)
+nfs3svc_decode_writeargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd3_writeargs *args = rqstp->rq_argp;
unsigned int len, v, hdr, dlen;
u32 max_blocksize = svc_max_payload(rqstp);
struct kvec *head = rqstp->rq_arg.head;
@@ -413,9 +418,10 @@
}
int
-nfs3svc_decode_createargs(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_createargs *args)
+nfs3svc_decode_createargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd3_createargs *args = rqstp->rq_argp;
+
if (!(p = decode_fh(p, &args->fh))
|| !(p = decode_filename(p, &args->name, &args->len)))
return 0;
@@ -435,10 +441,12 @@
return xdr_argsize_check(rqstp, p);
}
+
int
-nfs3svc_decode_mkdirargs(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_createargs *args)
+nfs3svc_decode_mkdirargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd3_createargs *args = rqstp->rq_argp;
+
if (!(p = decode_fh(p, &args->fh)) ||
!(p = decode_filename(p, &args->name, &args->len)))
return 0;
@@ -448,9 +456,9 @@
}
int
-nfs3svc_decode_symlinkargs(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_symlinkargs *args)
+nfs3svc_decode_symlinkargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd3_symlinkargs *args = rqstp->rq_argp;
unsigned int len, avail;
char *old, *new;
struct kvec *vec;
@@ -500,9 +508,10 @@
}
int
-nfs3svc_decode_mknodargs(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_mknodargs *args)
+nfs3svc_decode_mknodargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd3_mknodargs *args = rqstp->rq_argp;
+
if (!(p = decode_fh(p, &args->fh))
|| !(p = decode_filename(p, &args->name, &args->len)))
return 0;
@@ -522,9 +531,10 @@
}
int
-nfs3svc_decode_renameargs(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_renameargs *args)
+nfs3svc_decode_renameargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd3_renameargs *args = rqstp->rq_argp;
+
if (!(p = decode_fh(p, &args->ffh))
|| !(p = decode_filename(p, &args->fname, &args->flen))
|| !(p = decode_fh(p, &args->tfh))
@@ -535,9 +545,10 @@
}
int
-nfs3svc_decode_readlinkargs(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_readlinkargs *args)
+nfs3svc_decode_readlinkargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd3_readlinkargs *args = rqstp->rq_argp;
+
p = decode_fh(p, &args->fh);
if (!p)
return 0;
@@ -547,9 +558,10 @@
}
int
-nfs3svc_decode_linkargs(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_linkargs *args)
+nfs3svc_decode_linkargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd3_linkargs *args = rqstp->rq_argp;
+
if (!(p = decode_fh(p, &args->ffh))
|| !(p = decode_fh(p, &args->tfh))
|| !(p = decode_filename(p, &args->tname, &args->tlen)))
@@ -559,9 +571,9 @@
}
int
-nfs3svc_decode_readdirargs(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_readdirargs *args)
+nfs3svc_decode_readdirargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd3_readdirargs *args = rqstp->rq_argp;
p = decode_fh(p, &args->fh);
if (!p)
return 0;
@@ -576,9 +588,9 @@
}
int
-nfs3svc_decode_readdirplusargs(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_readdirargs *args)
+nfs3svc_decode_readdirplusargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd3_readdirargs *args = rqstp->rq_argp;
int len;
u32 max_blocksize = svc_max_payload(rqstp);
@@ -602,9 +614,9 @@
}
int
-nfs3svc_decode_commitargs(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_commitargs *args)
+nfs3svc_decode_commitargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd3_commitargs *args = rqstp->rq_argp;
p = decode_fh(p, &args->fh);
if (!p)
return 0;
@@ -622,16 +634,17 @@
* will work properly.
*/
int
-nfs3svc_encode_voidres(struct svc_rqst *rqstp, __be32 *p, void *dummy)
+nfs3svc_encode_voidres(struct svc_rqst *rqstp, __be32 *p)
{
return xdr_ressize_check(rqstp, p);
}
/* GETATTR */
int
-nfs3svc_encode_attrstat(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_attrstat *resp)
+nfs3svc_encode_attrstat(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd3_attrstat *resp = rqstp->rq_resp;
+
if (resp->status == 0) {
lease_get_mtime(d_inode(resp->fh.fh_dentry),
&resp->stat.mtime);
@@ -642,18 +655,20 @@
/* SETATTR, REMOVE, RMDIR */
int
-nfs3svc_encode_wccstat(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_attrstat *resp)
+nfs3svc_encode_wccstat(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd3_attrstat *resp = rqstp->rq_resp;
+
p = encode_wcc_data(rqstp, p, &resp->fh);
return xdr_ressize_check(rqstp, p);
}
/* LOOKUP */
int
-nfs3svc_encode_diropres(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_diropres *resp)
+nfs3svc_encode_diropres(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd3_diropres *resp = rqstp->rq_resp;
+
if (resp->status == 0) {
p = encode_fh(p, &resp->fh);
p = encode_post_op_attr(rqstp, p, &resp->fh);
@@ -664,9 +679,10 @@
/* ACCESS */
int
-nfs3svc_encode_accessres(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_accessres *resp)
+nfs3svc_encode_accessres(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd3_accessres *resp = rqstp->rq_resp;
+
p = encode_post_op_attr(rqstp, p, &resp->fh);
if (resp->status == 0)
*p++ = htonl(resp->access);
@@ -675,9 +691,10 @@
/* READLINK */
int
-nfs3svc_encode_readlinkres(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_readlinkres *resp)
+nfs3svc_encode_readlinkres(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd3_readlinkres *resp = rqstp->rq_resp;
+
p = encode_post_op_attr(rqstp, p, &resp->fh);
if (resp->status == 0) {
*p++ = htonl(resp->len);
@@ -696,9 +713,10 @@
/* READ */
int
-nfs3svc_encode_readres(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_readres *resp)
+nfs3svc_encode_readres(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd3_readres *resp = rqstp->rq_resp;
+
p = encode_post_op_attr(rqstp, p, &resp->fh);
if (resp->status == 0) {
*p++ = htonl(resp->count);
@@ -720,9 +738,9 @@
/* WRITE */
int
-nfs3svc_encode_writeres(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_writeres *resp)
+nfs3svc_encode_writeres(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd3_writeres *resp = rqstp->rq_resp;
struct nfsd_net *nn = net_generic(SVC_NET(rqstp), nfsd_net_id);
p = encode_wcc_data(rqstp, p, &resp->fh);
@@ -737,9 +755,10 @@
/* CREATE, MKDIR, SYMLINK, MKNOD */
int
-nfs3svc_encode_createres(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_diropres *resp)
+nfs3svc_encode_createres(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd3_diropres *resp = rqstp->rq_resp;
+
if (resp->status == 0) {
*p++ = xdr_one;
p = encode_fh(p, &resp->fh);
@@ -751,9 +770,10 @@
/* RENAME */
int
-nfs3svc_encode_renameres(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_renameres *resp)
+nfs3svc_encode_renameres(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd3_renameres *resp = rqstp->rq_resp;
+
p = encode_wcc_data(rqstp, p, &resp->ffh);
p = encode_wcc_data(rqstp, p, &resp->tfh);
return xdr_ressize_check(rqstp, p);
@@ -761,9 +781,10 @@
/* LINK */
int
-nfs3svc_encode_linkres(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_linkres *resp)
+nfs3svc_encode_linkres(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd3_linkres *resp = rqstp->rq_resp;
+
p = encode_post_op_attr(rqstp, p, &resp->fh);
p = encode_wcc_data(rqstp, p, &resp->tfh);
return xdr_ressize_check(rqstp, p);
@@ -771,9 +792,10 @@
/* READDIR */
int
-nfs3svc_encode_readdirres(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_readdirres *resp)
+nfs3svc_encode_readdirres(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd3_readdirres *resp = rqstp->rq_resp;
+
p = encode_post_op_attr(rqstp, p, &resp->fh);
if (resp->status == 0) {
@@ -1021,9 +1043,9 @@
/* FSSTAT */
int
-nfs3svc_encode_fsstatres(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_fsstatres *resp)
+nfs3svc_encode_fsstatres(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd3_fsstatres *resp = rqstp->rq_resp;
struct kstatfs *s = &resp->stats;
u64 bs = s->f_bsize;
@@ -1043,9 +1065,10 @@
/* FSINFO */
int
-nfs3svc_encode_fsinfores(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_fsinfores *resp)
+nfs3svc_encode_fsinfores(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd3_fsinfores *resp = rqstp->rq_resp;
+
*p++ = xdr_zero; /* no post_op_attr */
if (resp->status == 0) {
@@ -1067,9 +1090,10 @@
/* PATHCONF */
int
-nfs3svc_encode_pathconfres(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_pathconfres *resp)
+nfs3svc_encode_pathconfres(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd3_pathconfres *resp = rqstp->rq_resp;
+
*p++ = xdr_zero; /* no post_op_attr */
if (resp->status == 0) {
@@ -1086,9 +1110,9 @@
/* COMMIT */
int
-nfs3svc_encode_commitres(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_commitres *resp)
+nfs3svc_encode_commitres(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd3_commitres *resp = rqstp->rq_resp;
struct nfsd_net *nn = net_generic(SVC_NET(rqstp), nfsd_net_id);
p = encode_wcc_data(rqstp, p, &resp->fh);
@@ -1103,19 +1127,19 @@
/*
* XDR release functions
*/
-int
-nfs3svc_release_fhandle(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_attrstat *resp)
+void
+nfs3svc_release_fhandle(struct svc_rqst *rqstp)
{
+ struct nfsd3_attrstat *resp = rqstp->rq_resp;
+
fh_put(&resp->fh);
- return 1;
}
-int
-nfs3svc_release_fhandle2(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd3_fhandle_pair *resp)
+void
+nfs3svc_release_fhandle2(struct svc_rqst *rqstp)
{
+ struct nfsd3_fhandle_pair *resp = rqstp->rq_resp;
+
fh_put(&resp->fh1);
fh_put(&resp->fh2);
- return 1;
}
diff --git a/fs/nfsd/nfs4callback.c b/fs/nfsd/nfs4callback.c
index 0274db6..49b0a9e 100644
--- a/fs/nfsd/nfs4callback.c
+++ b/fs/nfsd/nfs4callback.c
@@ -468,7 +468,7 @@
* NB: Without this zero space reservation, callbacks over krb5p fail
*/
static void nfs4_xdr_enc_cb_null(struct rpc_rqst *req, struct xdr_stream *xdr,
- void *__unused)
+ const void *__unused)
{
xdr_reserve_space(xdr, 0);
}
@@ -477,8 +477,9 @@
* 20.2. Operation 4: CB_RECALL - Recall a Delegation
*/
static void nfs4_xdr_enc_cb_recall(struct rpc_rqst *req, struct xdr_stream *xdr,
- const struct nfsd4_callback *cb)
+ const void *data)
{
+ const struct nfsd4_callback *cb = data;
const struct nfs4_delegation *dp = cb_to_delegation(cb);
struct nfs4_cb_compound_hdr hdr = {
.ident = cb->cb_clp->cl_cb_ident,
@@ -512,8 +513,9 @@
*/
static int nfs4_xdr_dec_cb_recall(struct rpc_rqst *rqstp,
struct xdr_stream *xdr,
- struct nfsd4_callback *cb)
+ void *data)
{
+ struct nfsd4_callback *cb = data;
struct nfs4_cb_compound_hdr hdr;
int status;
@@ -585,8 +587,9 @@
static void nfs4_xdr_enc_cb_layout(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nfsd4_callback *cb)
+ const void *data)
{
+ const struct nfsd4_callback *cb = data;
const struct nfs4_layout_stateid *ls =
container_of(cb, struct nfs4_layout_stateid, ls_recall);
struct nfs4_cb_compound_hdr hdr = {
@@ -602,8 +605,9 @@
static int nfs4_xdr_dec_cb_layout(struct rpc_rqst *rqstp,
struct xdr_stream *xdr,
- struct nfsd4_callback *cb)
+ void *data)
{
+ struct nfsd4_callback *cb = data;
struct nfs4_cb_compound_hdr hdr;
int status;
@@ -631,8 +635,9 @@
static void nfs4_xdr_enc_cb_notify_lock(struct rpc_rqst *req,
struct xdr_stream *xdr,
- const struct nfsd4_callback *cb)
+ const void *data)
{
+ const struct nfsd4_callback *cb = data;
const struct nfsd4_blocked_lock *nbl =
container_of(cb, struct nfsd4_blocked_lock, nbl_cb);
struct nfs4_lockowner *lo = (struct nfs4_lockowner *)nbl->nbl_lock.fl_owner;
@@ -659,8 +664,9 @@
static int nfs4_xdr_dec_cb_notify_lock(struct rpc_rqst *rqstp,
struct xdr_stream *xdr,
- struct nfsd4_callback *cb)
+ void *data)
{
+ struct nfsd4_callback *cb = data;
struct nfs4_cb_compound_hdr hdr;
int status;
@@ -682,15 +688,15 @@
#define PROC(proc, call, argtype, restype) \
[NFSPROC4_CLNT_##proc] = { \
.p_proc = NFSPROC4_CB_##call, \
- .p_encode = (kxdreproc_t)nfs4_xdr_enc_##argtype, \
- .p_decode = (kxdrdproc_t)nfs4_xdr_dec_##restype, \
+ .p_encode = nfs4_xdr_enc_##argtype, \
+ .p_decode = nfs4_xdr_dec_##restype, \
.p_arglen = NFS4_enc_##argtype##_sz, \
.p_replen = NFS4_dec_##restype##_sz, \
.p_statidx = NFSPROC4_CB_##call, \
.p_name = #proc, \
}
-static struct rpc_procinfo nfs4_cb_procedures[] = {
+static const struct rpc_procinfo nfs4_cb_procedures[] = {
PROC(CB_NULL, NULL, cb_null, cb_null),
PROC(CB_RECALL, COMPOUND, cb_recall, cb_recall),
#ifdef CONFIG_NFSD_PNFS
@@ -699,7 +705,8 @@
PROC(CB_NOTIFY_LOCK, COMPOUND, cb_notify_lock, cb_notify_lock),
};
-static struct rpc_version nfs_cb_version4 = {
+static unsigned int nfs4_cb_counts[ARRAY_SIZE(nfs4_cb_procedures)];
+static const struct rpc_version nfs_cb_version4 = {
/*
* Note on the callback rpc program version number: despite language in rfc
* 5661 section 18.36.3 requiring servers to use 4 in this field, the
@@ -709,11 +716,12 @@
*/
.number = 1,
.nrprocs = ARRAY_SIZE(nfs4_cb_procedures),
- .procs = nfs4_cb_procedures
+ .procs = nfs4_cb_procedures,
+ .counts = nfs4_cb_counts,
};
-static const struct rpc_version *nfs_cb_version[] = {
- &nfs_cb_version4,
+static const struct rpc_version *nfs_cb_version[2] = {
+ [1] = &nfs_cb_version4,
};
static const struct rpc_program cb_program;
@@ -787,7 +795,7 @@
.saddress = (struct sockaddr *) &conn->cb_saddr,
.timeout = &timeparms,
.program = &cb_program,
- .version = 0,
+ .version = 1,
.flags = (RPC_CLNT_CREATE_NOPING | RPC_CLNT_CREATE_QUIET),
};
struct rpc_clnt *client;
diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c
index dadb3bf..d27e75a 100644
--- a/fs/nfsd/nfs4proc.c
+++ b/fs/nfsd/nfs4proc.c
@@ -344,8 +344,9 @@
static __be32
nfsd4_open(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
- struct nfsd4_open *open)
+ union nfsd4_op_u *u)
{
+ struct nfsd4_open *open = &u->open;
__be32 status;
struct svc_fh *resfh = NULL;
struct net *net = SVC_NET(rqstp);
@@ -467,14 +468,14 @@
*/
static __be32 nfsd4_open_omfg(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate, struct nfsd4_op *op)
{
- struct nfsd4_open *open = (struct nfsd4_open *)&op->u;
+ struct nfsd4_open *open = &op->u.open;
if (!seqid_mutating_err(ntohl(op->status)))
return op->status;
if (nfsd4_has_session(cstate))
return op->status;
open->op_xdr_error = op->status;
- return nfsd4_open(rqstp, cstate, open);
+ return nfsd4_open(rqstp, cstate, &op->u);
}
/*
@@ -482,19 +483,21 @@
*/
static __be32
nfsd4_getfh(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
- struct svc_fh **getfh)
+ union nfsd4_op_u *u)
{
if (!cstate->current_fh.fh_dentry)
return nfserr_nofilehandle;
- *getfh = &cstate->current_fh;
+ u->getfh = &cstate->current_fh;
return nfs_ok;
}
static __be32
nfsd4_putfh(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
- struct nfsd4_putfh *putfh)
+ union nfsd4_op_u *u)
{
+ struct nfsd4_putfh *putfh = &u->putfh;
+
fh_put(&cstate->current_fh);
cstate->current_fh.fh_handle.fh_size = putfh->pf_fhlen;
memcpy(&cstate->current_fh.fh_handle.fh_base, putfh->pf_fhval,
@@ -504,7 +507,7 @@
static __be32
nfsd4_putrootfh(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
- void *arg)
+ union nfsd4_op_u *u)
{
__be32 status;
@@ -515,7 +518,7 @@
static __be32
nfsd4_restorefh(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
- void *arg)
+ union nfsd4_op_u *u)
{
if (!cstate->save_fh.fh_dentry)
return nfserr_restorefh;
@@ -530,7 +533,7 @@
static __be32
nfsd4_savefh(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
- void *arg)
+ union nfsd4_op_u *u)
{
if (!cstate->current_fh.fh_dentry)
return nfserr_nofilehandle;
@@ -548,8 +551,10 @@
*/
static __be32
nfsd4_access(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
- struct nfsd4_access *access)
+ union nfsd4_op_u *u)
{
+ struct nfsd4_access *access = &u->access;
+
if (access->ac_req_access & ~NFS3_ACCESS_FULL)
return nfserr_inval;
@@ -574,8 +579,10 @@
static __be32
nfsd4_commit(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
- struct nfsd4_commit *commit)
+ union nfsd4_op_u *u)
{
+ struct nfsd4_commit *commit = &u->commit;
+
gen_boot_verifier(&commit->co_verf, SVC_NET(rqstp));
return nfsd_commit(rqstp, &cstate->current_fh, commit->co_offset,
commit->co_count);
@@ -583,8 +590,9 @@
static __be32
nfsd4_create(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
- struct nfsd4_create *create)
+ union nfsd4_op_u *u)
{
+ struct nfsd4_create *create = &u->create;
struct svc_fh resfh;
__be32 status;
dev_t rdev;
@@ -670,8 +678,9 @@
static __be32
nfsd4_getattr(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
- struct nfsd4_getattr *getattr)
+ union nfsd4_op_u *u)
{
+ struct nfsd4_getattr *getattr = &u->getattr;
__be32 status;
status = fh_verify(rqstp, &cstate->current_fh, 0, NFSD_MAY_NOP);
@@ -691,8 +700,9 @@
static __be32
nfsd4_link(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
- struct nfsd4_link *link)
+ union nfsd4_op_u *u)
{
+ struct nfsd4_link *link = &u->link;
__be32 status = nfserr_nofilehandle;
if (!cstate->save_fh.fh_dentry)
@@ -723,24 +733,25 @@
static __be32
nfsd4_lookupp(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
- void *arg)
+ union nfsd4_op_u *u)
{
return nfsd4_do_lookupp(rqstp, &cstate->current_fh);
}
static __be32
nfsd4_lookup(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
- struct nfsd4_lookup *lookup)
+ union nfsd4_op_u *u)
{
return nfsd_lookup(rqstp, &cstate->current_fh,
- lookup->lo_name, lookup->lo_len,
+ u->lookup.lo_name, u->lookup.lo_len,
&cstate->current_fh);
}
static __be32
nfsd4_read(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
- struct nfsd4_read *read)
+ union nfsd4_op_u *u)
{
+ struct nfsd4_read *read = &u->read;
__be32 status;
read->rd_filp = NULL;
@@ -775,8 +786,9 @@
static __be32
nfsd4_readdir(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
- struct nfsd4_readdir *readdir)
+ union nfsd4_op_u *u)
{
+ struct nfsd4_readdir *readdir = &u->readdir;
u64 cookie = readdir->rd_cookie;
static const nfs4_verifier zeroverf;
@@ -800,17 +812,18 @@
static __be32
nfsd4_readlink(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
- struct nfsd4_readlink *readlink)
+ union nfsd4_op_u *u)
{
- readlink->rl_rqstp = rqstp;
- readlink->rl_fhp = &cstate->current_fh;
+ u->readlink.rl_rqstp = rqstp;
+ u->readlink.rl_fhp = &cstate->current_fh;
return nfs_ok;
}
static __be32
nfsd4_remove(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
- struct nfsd4_remove *remove)
+ union nfsd4_op_u *u)
{
+ struct nfsd4_remove *remove = &u->remove;
__be32 status;
if (opens_in_grace(SVC_NET(rqstp)))
@@ -826,8 +839,9 @@
static __be32
nfsd4_rename(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
- struct nfsd4_rename *rename)
+ union nfsd4_op_u *u)
{
+ struct nfsd4_rename *rename = &u->rename;
__be32 status = nfserr_nofilehandle;
if (!cstate->save_fh.fh_dentry)
@@ -847,8 +861,9 @@
static __be32
nfsd4_secinfo(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
- struct nfsd4_secinfo *secinfo)
+ union nfsd4_op_u *u)
{
+ struct nfsd4_secinfo *secinfo = &u->secinfo;
struct svc_export *exp;
struct dentry *dentry;
__be32 err;
@@ -876,11 +891,11 @@
static __be32
nfsd4_secinfo_no_name(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
- struct nfsd4_secinfo_no_name *sin)
+ union nfsd4_op_u *u)
{
__be32 err;
- switch (sin->sin_style) {
+ switch (u->secinfo_no_name.sin_style) {
case NFS4_SECINFO_STYLE4_CURRENT_FH:
break;
case NFS4_SECINFO_STYLE4_PARENT:
@@ -892,15 +907,16 @@
return nfserr_inval;
}
- sin->sin_exp = exp_get(cstate->current_fh.fh_export);
+ u->secinfo_no_name.sin_exp = exp_get(cstate->current_fh.fh_export);
fh_put(&cstate->current_fh);
return nfs_ok;
}
static __be32
nfsd4_setattr(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
- struct nfsd4_setattr *setattr)
+ union nfsd4_op_u *u)
{
+ struct nfsd4_setattr *setattr = &u->setattr;
__be32 status = nfs_ok;
int err;
@@ -960,8 +976,9 @@
static __be32
nfsd4_write(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
- struct nfsd4_write *write)
+ union nfsd4_op_u *u)
{
+ struct nfsd4_write *write = &u->write;
stateid_t *stateid = &write->wr_stateid;
struct file *filp = NULL;
__be32 status = nfs_ok;
@@ -1034,8 +1051,9 @@
static __be32
nfsd4_clone(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
- struct nfsd4_clone *clone)
+ union nfsd4_op_u *u)
{
+ struct nfsd4_clone *clone = &u->clone;
struct file *src, *dst;
__be32 status;
@@ -1055,8 +1073,9 @@
static __be32
nfsd4_copy(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
- struct nfsd4_copy *copy)
+ union nfsd4_op_u *u)
{
+ struct nfsd4_copy *copy = &u->copy;
struct file *src, *dst;
__be32 status;
ssize_t bytes;
@@ -1111,23 +1130,24 @@
static __be32
nfsd4_allocate(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
- struct nfsd4_fallocate *fallocate)
+ union nfsd4_op_u *u)
{
- return nfsd4_fallocate(rqstp, cstate, fallocate, 0);
+ return nfsd4_fallocate(rqstp, cstate, &u->allocate, 0);
}
static __be32
nfsd4_deallocate(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
- struct nfsd4_fallocate *fallocate)
+ union nfsd4_op_u *u)
{
- return nfsd4_fallocate(rqstp, cstate, fallocate,
+ return nfsd4_fallocate(rqstp, cstate, &u->deallocate,
FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE);
}
static __be32
nfsd4_seek(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
- struct nfsd4_seek *seek)
+ union nfsd4_op_u *u)
{
+ struct nfsd4_seek *seek = &u->seek;
int whence;
__be32 status;
struct file *file;
@@ -1232,21 +1252,21 @@
static __be32
nfsd4_nverify(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
- struct nfsd4_verify *verify)
+ union nfsd4_op_u *u)
{
__be32 status;
- status = _nfsd4_verify(rqstp, cstate, verify);
+ status = _nfsd4_verify(rqstp, cstate, &u->verify);
return status == nfserr_not_same ? nfs_ok : status;
}
static __be32
nfsd4_verify(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
- struct nfsd4_verify *verify)
+ union nfsd4_op_u *u)
{
__be32 status;
- status = _nfsd4_verify(rqstp, cstate, verify);
+ status = _nfsd4_verify(rqstp, cstate, &u->nverify);
return status == nfserr_same ? nfs_ok : status;
}
@@ -1271,9 +1291,9 @@
static __be32
nfsd4_getdeviceinfo(struct svc_rqst *rqstp,
- struct nfsd4_compound_state *cstate,
- struct nfsd4_getdeviceinfo *gdp)
+ struct nfsd4_compound_state *cstate, union nfsd4_op_u *u)
{
+ struct nfsd4_getdeviceinfo *gdp = &u->getdeviceinfo;
const struct nfsd4_layout_ops *ops;
struct nfsd4_deviceid_map *map;
struct svc_export *exp;
@@ -1317,9 +1337,9 @@
static __be32
nfsd4_layoutget(struct svc_rqst *rqstp,
- struct nfsd4_compound_state *cstate,
- struct nfsd4_layoutget *lgp)
+ struct nfsd4_compound_state *cstate, union nfsd4_op_u *u)
{
+ struct nfsd4_layoutget *lgp = &u->layoutget;
struct svc_fh *current_fh = &cstate->current_fh;
const struct nfsd4_layout_ops *ops;
struct nfs4_layout_stateid *ls;
@@ -1397,9 +1417,9 @@
static __be32
nfsd4_layoutcommit(struct svc_rqst *rqstp,
- struct nfsd4_compound_state *cstate,
- struct nfsd4_layoutcommit *lcp)
+ struct nfsd4_compound_state *cstate, union nfsd4_op_u *u)
{
+ struct nfsd4_layoutcommit *lcp = &u->layoutcommit;
const struct nfsd4_layout_seg *seg = &lcp->lc_seg;
struct svc_fh *current_fh = &cstate->current_fh;
const struct nfsd4_layout_ops *ops;
@@ -1461,9 +1481,9 @@
static __be32
nfsd4_layoutreturn(struct svc_rqst *rqstp,
- struct nfsd4_compound_state *cstate,
- struct nfsd4_layoutreturn *lrp)
+ struct nfsd4_compound_state *cstate, union nfsd4_op_u *u)
{
+ struct nfsd4_layoutreturn *lrp = &u->layoutreturn;
struct svc_fh *current_fh = &cstate->current_fh;
__be32 nfserr;
@@ -1510,7 +1530,7 @@
* NULL call.
*/
static __be32
-nfsd4_proc_null(struct svc_rqst *rqstp, void *argp, void *resp)
+nfsd4_proc_null(struct svc_rqst *rqstp)
{
return nfs_ok;
}
@@ -1521,12 +1541,6 @@
nfsdstats.nfs4_opcount[opnum]++;
}
-typedef __be32(*nfsd4op_func)(struct svc_rqst *, struct nfsd4_compound_state *,
- void *);
-typedef u32(*nfsd4op_rsize)(struct svc_rqst *, struct nfsd4_op *op);
-typedef void(*stateid_setter)(struct nfsd4_compound_state *, void *);
-typedef void(*stateid_getter)(struct nfsd4_compound_state *, void *);
-
enum nfsd4_op_flags {
ALLOWED_WITHOUT_FH = 1 << 0, /* No current filehandle required */
ALLOWED_ON_ABSENT_FS = 1 << 1, /* ops processed on absent fs */
@@ -1558,16 +1572,19 @@
};
struct nfsd4_operation {
- nfsd4op_func op_func;
+ __be32 (*op_func)(struct svc_rqst *, struct nfsd4_compound_state *,
+ union nfsd4_op_u *);
u32 op_flags;
char *op_name;
/* Try to get response size before operation */
- nfsd4op_rsize op_rsize_bop;
- stateid_getter op_get_currentstateid;
- stateid_setter op_set_currentstateid;
+ u32 (*op_rsize_bop)(struct svc_rqst *, struct nfsd4_op *);
+ void (*op_get_currentstateid)(struct nfsd4_compound_state *,
+ union nfsd4_op_u *);
+ void (*op_set_currentstateid)(struct nfsd4_compound_state *,
+ union nfsd4_op_u *);
};
-static struct nfsd4_operation nfsd4_ops[];
+static const struct nfsd4_operation nfsd4_ops[];
static const char *nfsd4_op_name(unsigned opnum);
@@ -1604,7 +1621,7 @@
return nfs_ok;
}
-static inline struct nfsd4_operation *OPDESC(struct nfsd4_op *op)
+static inline const struct nfsd4_operation *OPDESC(struct nfsd4_op *op)
{
return &nfsd4_ops[op->opnum];
}
@@ -1622,10 +1639,9 @@
struct nfsd4_compoundargs *argp = rqstp->rq_argp;
struct nfsd4_op *this = &argp->ops[resp->opcnt - 1];
struct nfsd4_op *next = &argp->ops[resp->opcnt];
- struct nfsd4_operation *thisd;
- struct nfsd4_operation *nextd;
+ const struct nfsd4_operation *thisd = OPDESC(this);
+ const struct nfsd4_operation *nextd;
- thisd = OPDESC(this);
/*
* Most ops check wronsec on our own; only the putfh-like ops
* have special rules.
@@ -1673,12 +1689,12 @@
* COMPOUND call.
*/
static __be32
-nfsd4_proc_compound(struct svc_rqst *rqstp,
- struct nfsd4_compoundargs *args,
- struct nfsd4_compoundres *resp)
+nfsd4_proc_compound(struct svc_rqst *rqstp)
{
+ struct nfsd4_compoundargs *args = rqstp->rq_argp;
+ struct nfsd4_compoundres *resp = rqstp->rq_resp;
struct nfsd4_op *op;
- struct nfsd4_operation *opdesc;
+ const struct nfsd4_operation *opdesc;
struct nfsd4_compound_state *cstate = &resp->cstate;
struct svc_fh *current_fh = &cstate->current_fh;
struct svc_fh *save_fh = &cstate->save_fh;
@@ -2091,360 +2107,360 @@
return (op_encode_hdr_size + 3) * sizeof(__be32);
}
-static struct nfsd4_operation nfsd4_ops[] = {
+static const struct nfsd4_operation nfsd4_ops[] = {
[OP_ACCESS] = {
- .op_func = (nfsd4op_func)nfsd4_access,
+ .op_func = nfsd4_access,
.op_name = "OP_ACCESS",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_access_rsize,
+ .op_rsize_bop = nfsd4_access_rsize,
},
[OP_CLOSE] = {
- .op_func = (nfsd4op_func)nfsd4_close,
+ .op_func = nfsd4_close,
.op_flags = OP_MODIFIES_SOMETHING,
.op_name = "OP_CLOSE",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_status_stateid_rsize,
- .op_get_currentstateid = (stateid_getter)nfsd4_get_closestateid,
- .op_set_currentstateid = (stateid_setter)nfsd4_set_closestateid,
+ .op_rsize_bop = nfsd4_status_stateid_rsize,
+ .op_get_currentstateid = nfsd4_get_closestateid,
+ .op_set_currentstateid = nfsd4_set_closestateid,
},
[OP_COMMIT] = {
- .op_func = (nfsd4op_func)nfsd4_commit,
+ .op_func = nfsd4_commit,
.op_flags = OP_MODIFIES_SOMETHING,
.op_name = "OP_COMMIT",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_commit_rsize,
+ .op_rsize_bop = nfsd4_commit_rsize,
},
[OP_CREATE] = {
- .op_func = (nfsd4op_func)nfsd4_create,
+ .op_func = nfsd4_create,
.op_flags = OP_MODIFIES_SOMETHING | OP_CACHEME | OP_CLEAR_STATEID,
.op_name = "OP_CREATE",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_create_rsize,
+ .op_rsize_bop = nfsd4_create_rsize,
},
[OP_DELEGRETURN] = {
- .op_func = (nfsd4op_func)nfsd4_delegreturn,
+ .op_func = nfsd4_delegreturn,
.op_flags = OP_MODIFIES_SOMETHING,
.op_name = "OP_DELEGRETURN",
.op_rsize_bop = nfsd4_only_status_rsize,
- .op_get_currentstateid = (stateid_getter)nfsd4_get_delegreturnstateid,
+ .op_get_currentstateid = nfsd4_get_delegreturnstateid,
},
[OP_GETATTR] = {
- .op_func = (nfsd4op_func)nfsd4_getattr,
+ .op_func = nfsd4_getattr,
.op_flags = ALLOWED_ON_ABSENT_FS,
.op_rsize_bop = nfsd4_getattr_rsize,
.op_name = "OP_GETATTR",
},
[OP_GETFH] = {
- .op_func = (nfsd4op_func)nfsd4_getfh,
+ .op_func = nfsd4_getfh,
.op_name = "OP_GETFH",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_getfh_rsize,
+ .op_rsize_bop = nfsd4_getfh_rsize,
},
[OP_LINK] = {
- .op_func = (nfsd4op_func)nfsd4_link,
+ .op_func = nfsd4_link,
.op_flags = ALLOWED_ON_ABSENT_FS | OP_MODIFIES_SOMETHING
| OP_CACHEME,
.op_name = "OP_LINK",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_link_rsize,
+ .op_rsize_bop = nfsd4_link_rsize,
},
[OP_LOCK] = {
- .op_func = (nfsd4op_func)nfsd4_lock,
+ .op_func = nfsd4_lock,
.op_flags = OP_MODIFIES_SOMETHING,
.op_name = "OP_LOCK",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_lock_rsize,
- .op_set_currentstateid = (stateid_setter)nfsd4_set_lockstateid,
+ .op_rsize_bop = nfsd4_lock_rsize,
+ .op_set_currentstateid = nfsd4_set_lockstateid,
},
[OP_LOCKT] = {
- .op_func = (nfsd4op_func)nfsd4_lockt,
+ .op_func = nfsd4_lockt,
.op_name = "OP_LOCKT",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_lock_rsize,
+ .op_rsize_bop = nfsd4_lock_rsize,
},
[OP_LOCKU] = {
- .op_func = (nfsd4op_func)nfsd4_locku,
+ .op_func = nfsd4_locku,
.op_flags = OP_MODIFIES_SOMETHING,
.op_name = "OP_LOCKU",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_status_stateid_rsize,
- .op_get_currentstateid = (stateid_getter)nfsd4_get_lockustateid,
+ .op_rsize_bop = nfsd4_status_stateid_rsize,
+ .op_get_currentstateid = nfsd4_get_lockustateid,
},
[OP_LOOKUP] = {
- .op_func = (nfsd4op_func)nfsd4_lookup,
+ .op_func = nfsd4_lookup,
.op_flags = OP_HANDLES_WRONGSEC | OP_CLEAR_STATEID,
.op_name = "OP_LOOKUP",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_only_status_rsize,
+ .op_rsize_bop = nfsd4_only_status_rsize,
},
[OP_LOOKUPP] = {
- .op_func = (nfsd4op_func)nfsd4_lookupp,
+ .op_func = nfsd4_lookupp,
.op_flags = OP_HANDLES_WRONGSEC | OP_CLEAR_STATEID,
.op_name = "OP_LOOKUPP",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_only_status_rsize,
+ .op_rsize_bop = nfsd4_only_status_rsize,
},
[OP_NVERIFY] = {
- .op_func = (nfsd4op_func)nfsd4_nverify,
+ .op_func = nfsd4_nverify,
.op_name = "OP_NVERIFY",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_only_status_rsize,
+ .op_rsize_bop = nfsd4_only_status_rsize,
},
[OP_OPEN] = {
- .op_func = (nfsd4op_func)nfsd4_open,
+ .op_func = nfsd4_open,
.op_flags = OP_HANDLES_WRONGSEC | OP_MODIFIES_SOMETHING,
.op_name = "OP_OPEN",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_open_rsize,
- .op_set_currentstateid = (stateid_setter)nfsd4_set_openstateid,
+ .op_rsize_bop = nfsd4_open_rsize,
+ .op_set_currentstateid = nfsd4_set_openstateid,
},
[OP_OPEN_CONFIRM] = {
- .op_func = (nfsd4op_func)nfsd4_open_confirm,
+ .op_func = nfsd4_open_confirm,
.op_flags = OP_MODIFIES_SOMETHING,
.op_name = "OP_OPEN_CONFIRM",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_status_stateid_rsize,
+ .op_rsize_bop = nfsd4_status_stateid_rsize,
},
[OP_OPEN_DOWNGRADE] = {
- .op_func = (nfsd4op_func)nfsd4_open_downgrade,
+ .op_func = nfsd4_open_downgrade,
.op_flags = OP_MODIFIES_SOMETHING,
.op_name = "OP_OPEN_DOWNGRADE",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_status_stateid_rsize,
- .op_get_currentstateid = (stateid_getter)nfsd4_get_opendowngradestateid,
- .op_set_currentstateid = (stateid_setter)nfsd4_set_opendowngradestateid,
+ .op_rsize_bop = nfsd4_status_stateid_rsize,
+ .op_get_currentstateid = nfsd4_get_opendowngradestateid,
+ .op_set_currentstateid = nfsd4_set_opendowngradestateid,
},
[OP_PUTFH] = {
- .op_func = (nfsd4op_func)nfsd4_putfh,
+ .op_func = nfsd4_putfh,
.op_flags = ALLOWED_WITHOUT_FH | ALLOWED_ON_ABSENT_FS
| OP_IS_PUTFH_LIKE | OP_CLEAR_STATEID,
.op_name = "OP_PUTFH",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_only_status_rsize,
+ .op_rsize_bop = nfsd4_only_status_rsize,
},
[OP_PUTPUBFH] = {
- .op_func = (nfsd4op_func)nfsd4_putrootfh,
+ .op_func = nfsd4_putrootfh,
.op_flags = ALLOWED_WITHOUT_FH | ALLOWED_ON_ABSENT_FS
| OP_IS_PUTFH_LIKE | OP_CLEAR_STATEID,
.op_name = "OP_PUTPUBFH",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_only_status_rsize,
+ .op_rsize_bop = nfsd4_only_status_rsize,
},
[OP_PUTROOTFH] = {
- .op_func = (nfsd4op_func)nfsd4_putrootfh,
+ .op_func = nfsd4_putrootfh,
.op_flags = ALLOWED_WITHOUT_FH | ALLOWED_ON_ABSENT_FS
| OP_IS_PUTFH_LIKE | OP_CLEAR_STATEID,
.op_name = "OP_PUTROOTFH",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_only_status_rsize,
+ .op_rsize_bop = nfsd4_only_status_rsize,
},
[OP_READ] = {
- .op_func = (nfsd4op_func)nfsd4_read,
+ .op_func = nfsd4_read,
.op_name = "OP_READ",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_read_rsize,
- .op_get_currentstateid = (stateid_getter)nfsd4_get_readstateid,
+ .op_rsize_bop = nfsd4_read_rsize,
+ .op_get_currentstateid = nfsd4_get_readstateid,
},
[OP_READDIR] = {
- .op_func = (nfsd4op_func)nfsd4_readdir,
+ .op_func = nfsd4_readdir,
.op_name = "OP_READDIR",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_readdir_rsize,
+ .op_rsize_bop = nfsd4_readdir_rsize,
},
[OP_READLINK] = {
- .op_func = (nfsd4op_func)nfsd4_readlink,
+ .op_func = nfsd4_readlink,
.op_name = "OP_READLINK",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_readlink_rsize,
+ .op_rsize_bop = nfsd4_readlink_rsize,
},
[OP_REMOVE] = {
- .op_func = (nfsd4op_func)nfsd4_remove,
+ .op_func = nfsd4_remove,
.op_flags = OP_MODIFIES_SOMETHING | OP_CACHEME,
.op_name = "OP_REMOVE",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_remove_rsize,
+ .op_rsize_bop = nfsd4_remove_rsize,
},
[OP_RENAME] = {
- .op_func = (nfsd4op_func)nfsd4_rename,
+ .op_func = nfsd4_rename,
.op_flags = OP_MODIFIES_SOMETHING | OP_CACHEME,
.op_name = "OP_RENAME",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_rename_rsize,
+ .op_rsize_bop = nfsd4_rename_rsize,
},
[OP_RENEW] = {
- .op_func = (nfsd4op_func)nfsd4_renew,
+ .op_func = nfsd4_renew,
.op_flags = ALLOWED_WITHOUT_FH | ALLOWED_ON_ABSENT_FS
| OP_MODIFIES_SOMETHING,
.op_name = "OP_RENEW",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_only_status_rsize,
+ .op_rsize_bop = nfsd4_only_status_rsize,
},
[OP_RESTOREFH] = {
- .op_func = (nfsd4op_func)nfsd4_restorefh,
+ .op_func = nfsd4_restorefh,
.op_flags = ALLOWED_WITHOUT_FH | ALLOWED_ON_ABSENT_FS
| OP_IS_PUTFH_LIKE | OP_MODIFIES_SOMETHING,
.op_name = "OP_RESTOREFH",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_only_status_rsize,
+ .op_rsize_bop = nfsd4_only_status_rsize,
},
[OP_SAVEFH] = {
- .op_func = (nfsd4op_func)nfsd4_savefh,
+ .op_func = nfsd4_savefh,
.op_flags = OP_HANDLES_WRONGSEC | OP_MODIFIES_SOMETHING,
.op_name = "OP_SAVEFH",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_only_status_rsize,
+ .op_rsize_bop = nfsd4_only_status_rsize,
},
[OP_SECINFO] = {
- .op_func = (nfsd4op_func)nfsd4_secinfo,
+ .op_func = nfsd4_secinfo,
.op_flags = OP_HANDLES_WRONGSEC,
.op_name = "OP_SECINFO",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_secinfo_rsize,
+ .op_rsize_bop = nfsd4_secinfo_rsize,
},
[OP_SETATTR] = {
- .op_func = (nfsd4op_func)nfsd4_setattr,
+ .op_func = nfsd4_setattr,
.op_name = "OP_SETATTR",
.op_flags = OP_MODIFIES_SOMETHING | OP_CACHEME,
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_setattr_rsize,
- .op_get_currentstateid = (stateid_getter)nfsd4_get_setattrstateid,
+ .op_rsize_bop = nfsd4_setattr_rsize,
+ .op_get_currentstateid = nfsd4_get_setattrstateid,
},
[OP_SETCLIENTID] = {
- .op_func = (nfsd4op_func)nfsd4_setclientid,
+ .op_func = nfsd4_setclientid,
.op_flags = ALLOWED_WITHOUT_FH | ALLOWED_ON_ABSENT_FS
| OP_MODIFIES_SOMETHING | OP_CACHEME,
.op_name = "OP_SETCLIENTID",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_setclientid_rsize,
+ .op_rsize_bop = nfsd4_setclientid_rsize,
},
[OP_SETCLIENTID_CONFIRM] = {
- .op_func = (nfsd4op_func)nfsd4_setclientid_confirm,
+ .op_func = nfsd4_setclientid_confirm,
.op_flags = ALLOWED_WITHOUT_FH | ALLOWED_ON_ABSENT_FS
| OP_MODIFIES_SOMETHING | OP_CACHEME,
.op_name = "OP_SETCLIENTID_CONFIRM",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_only_status_rsize,
+ .op_rsize_bop = nfsd4_only_status_rsize,
},
[OP_VERIFY] = {
- .op_func = (nfsd4op_func)nfsd4_verify,
+ .op_func = nfsd4_verify,
.op_name = "OP_VERIFY",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_only_status_rsize,
+ .op_rsize_bop = nfsd4_only_status_rsize,
},
[OP_WRITE] = {
- .op_func = (nfsd4op_func)nfsd4_write,
+ .op_func = nfsd4_write,
.op_flags = OP_MODIFIES_SOMETHING | OP_CACHEME,
.op_name = "OP_WRITE",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_write_rsize,
- .op_get_currentstateid = (stateid_getter)nfsd4_get_writestateid,
+ .op_rsize_bop = nfsd4_write_rsize,
+ .op_get_currentstateid = nfsd4_get_writestateid,
},
[OP_RELEASE_LOCKOWNER] = {
- .op_func = (nfsd4op_func)nfsd4_release_lockowner,
+ .op_func = nfsd4_release_lockowner,
.op_flags = ALLOWED_WITHOUT_FH | ALLOWED_ON_ABSENT_FS
| OP_MODIFIES_SOMETHING,
.op_name = "OP_RELEASE_LOCKOWNER",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_only_status_rsize,
+ .op_rsize_bop = nfsd4_only_status_rsize,
},
/* NFSv4.1 operations */
[OP_EXCHANGE_ID] = {
- .op_func = (nfsd4op_func)nfsd4_exchange_id,
+ .op_func = nfsd4_exchange_id,
.op_flags = ALLOWED_WITHOUT_FH | ALLOWED_AS_FIRST_OP
| OP_MODIFIES_SOMETHING,
.op_name = "OP_EXCHANGE_ID",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_exchange_id_rsize,
+ .op_rsize_bop = nfsd4_exchange_id_rsize,
},
[OP_BACKCHANNEL_CTL] = {
- .op_func = (nfsd4op_func)nfsd4_backchannel_ctl,
+ .op_func = nfsd4_backchannel_ctl,
.op_flags = ALLOWED_WITHOUT_FH | OP_MODIFIES_SOMETHING,
.op_name = "OP_BACKCHANNEL_CTL",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_only_status_rsize,
+ .op_rsize_bop = nfsd4_only_status_rsize,
},
[OP_BIND_CONN_TO_SESSION] = {
- .op_func = (nfsd4op_func)nfsd4_bind_conn_to_session,
+ .op_func = nfsd4_bind_conn_to_session,
.op_flags = ALLOWED_WITHOUT_FH | ALLOWED_AS_FIRST_OP
| OP_MODIFIES_SOMETHING,
.op_name = "OP_BIND_CONN_TO_SESSION",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_bind_conn_to_session_rsize,
+ .op_rsize_bop = nfsd4_bind_conn_to_session_rsize,
},
[OP_CREATE_SESSION] = {
- .op_func = (nfsd4op_func)nfsd4_create_session,
+ .op_func = nfsd4_create_session,
.op_flags = ALLOWED_WITHOUT_FH | ALLOWED_AS_FIRST_OP
| OP_MODIFIES_SOMETHING,
.op_name = "OP_CREATE_SESSION",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_create_session_rsize,
+ .op_rsize_bop = nfsd4_create_session_rsize,
},
[OP_DESTROY_SESSION] = {
- .op_func = (nfsd4op_func)nfsd4_destroy_session,
+ .op_func = nfsd4_destroy_session,
.op_flags = ALLOWED_WITHOUT_FH | ALLOWED_AS_FIRST_OP
| OP_MODIFIES_SOMETHING,
.op_name = "OP_DESTROY_SESSION",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_only_status_rsize,
+ .op_rsize_bop = nfsd4_only_status_rsize,
},
[OP_SEQUENCE] = {
- .op_func = (nfsd4op_func)nfsd4_sequence,
+ .op_func = nfsd4_sequence,
.op_flags = ALLOWED_WITHOUT_FH | ALLOWED_AS_FIRST_OP,
.op_name = "OP_SEQUENCE",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_sequence_rsize,
+ .op_rsize_bop = nfsd4_sequence_rsize,
},
[OP_DESTROY_CLIENTID] = {
- .op_func = (nfsd4op_func)nfsd4_destroy_clientid,
+ .op_func = nfsd4_destroy_clientid,
.op_flags = ALLOWED_WITHOUT_FH | ALLOWED_AS_FIRST_OP
| OP_MODIFIES_SOMETHING,
.op_name = "OP_DESTROY_CLIENTID",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_only_status_rsize,
+ .op_rsize_bop = nfsd4_only_status_rsize,
},
[OP_RECLAIM_COMPLETE] = {
- .op_func = (nfsd4op_func)nfsd4_reclaim_complete,
+ .op_func = nfsd4_reclaim_complete,
.op_flags = ALLOWED_WITHOUT_FH | OP_MODIFIES_SOMETHING,
.op_name = "OP_RECLAIM_COMPLETE",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_only_status_rsize,
+ .op_rsize_bop = nfsd4_only_status_rsize,
},
[OP_SECINFO_NO_NAME] = {
- .op_func = (nfsd4op_func)nfsd4_secinfo_no_name,
+ .op_func = nfsd4_secinfo_no_name,
.op_flags = OP_HANDLES_WRONGSEC,
.op_name = "OP_SECINFO_NO_NAME",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_secinfo_rsize,
+ .op_rsize_bop = nfsd4_secinfo_rsize,
},
[OP_TEST_STATEID] = {
- .op_func = (nfsd4op_func)nfsd4_test_stateid,
+ .op_func = nfsd4_test_stateid,
.op_flags = ALLOWED_WITHOUT_FH,
.op_name = "OP_TEST_STATEID",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_test_stateid_rsize,
+ .op_rsize_bop = nfsd4_test_stateid_rsize,
},
[OP_FREE_STATEID] = {
- .op_func = (nfsd4op_func)nfsd4_free_stateid,
+ .op_func = nfsd4_free_stateid,
.op_flags = ALLOWED_WITHOUT_FH | OP_MODIFIES_SOMETHING,
.op_name = "OP_FREE_STATEID",
- .op_get_currentstateid = (stateid_getter)nfsd4_get_freestateid,
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_only_status_rsize,
+ .op_get_currentstateid = nfsd4_get_freestateid,
+ .op_rsize_bop = nfsd4_only_status_rsize,
},
#ifdef CONFIG_NFSD_PNFS
[OP_GETDEVICEINFO] = {
- .op_func = (nfsd4op_func)nfsd4_getdeviceinfo,
+ .op_func = nfsd4_getdeviceinfo,
.op_flags = ALLOWED_WITHOUT_FH,
.op_name = "OP_GETDEVICEINFO",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_getdeviceinfo_rsize,
+ .op_rsize_bop = nfsd4_getdeviceinfo_rsize,
},
[OP_LAYOUTGET] = {
- .op_func = (nfsd4op_func)nfsd4_layoutget,
+ .op_func = nfsd4_layoutget,
.op_flags = OP_MODIFIES_SOMETHING,
.op_name = "OP_LAYOUTGET",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_layoutget_rsize,
+ .op_rsize_bop = nfsd4_layoutget_rsize,
},
[OP_LAYOUTCOMMIT] = {
- .op_func = (nfsd4op_func)nfsd4_layoutcommit,
+ .op_func = nfsd4_layoutcommit,
.op_flags = OP_MODIFIES_SOMETHING,
.op_name = "OP_LAYOUTCOMMIT",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_layoutcommit_rsize,
+ .op_rsize_bop = nfsd4_layoutcommit_rsize,
},
[OP_LAYOUTRETURN] = {
- .op_func = (nfsd4op_func)nfsd4_layoutreturn,
+ .op_func = nfsd4_layoutreturn,
.op_flags = OP_MODIFIES_SOMETHING,
.op_name = "OP_LAYOUTRETURN",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_layoutreturn_rsize,
+ .op_rsize_bop = nfsd4_layoutreturn_rsize,
},
#endif /* CONFIG_NFSD_PNFS */
/* NFSv4.2 operations */
[OP_ALLOCATE] = {
- .op_func = (nfsd4op_func)nfsd4_allocate,
+ .op_func = nfsd4_allocate,
.op_flags = OP_MODIFIES_SOMETHING | OP_CACHEME,
.op_name = "OP_ALLOCATE",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_only_status_rsize,
+ .op_rsize_bop = nfsd4_only_status_rsize,
},
[OP_DEALLOCATE] = {
- .op_func = (nfsd4op_func)nfsd4_deallocate,
+ .op_func = nfsd4_deallocate,
.op_flags = OP_MODIFIES_SOMETHING | OP_CACHEME,
.op_name = "OP_DEALLOCATE",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_only_status_rsize,
+ .op_rsize_bop = nfsd4_only_status_rsize,
},
[OP_CLONE] = {
- .op_func = (nfsd4op_func)nfsd4_clone,
+ .op_func = nfsd4_clone,
.op_flags = OP_MODIFIES_SOMETHING | OP_CACHEME,
.op_name = "OP_CLONE",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_only_status_rsize,
+ .op_rsize_bop = nfsd4_only_status_rsize,
},
[OP_COPY] = {
- .op_func = (nfsd4op_func)nfsd4_copy,
+ .op_func = nfsd4_copy,
.op_flags = OP_MODIFIES_SOMETHING | OP_CACHEME,
.op_name = "OP_COPY",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_copy_rsize,
+ .op_rsize_bop = nfsd4_copy_rsize,
},
[OP_SEEK] = {
- .op_func = (nfsd4op_func)nfsd4_seek,
+ .op_func = nfsd4_seek,
.op_name = "OP_SEEK",
- .op_rsize_bop = (nfsd4op_rsize)nfsd4_seek_rsize,
+ .op_rsize_bop = nfsd4_seek_rsize,
},
};
@@ -2515,19 +2531,19 @@
#define nfsd4_voidres nfsd4_voidargs
struct nfsd4_voidargs { int dummy; };
-static struct svc_procedure nfsd_procedures4[2] = {
+static const struct svc_procedure nfsd_procedures4[2] = {
[NFSPROC4_NULL] = {
- .pc_func = (svc_procfunc) nfsd4_proc_null,
- .pc_encode = (kxdrproc_t) nfs4svc_encode_voidres,
+ .pc_func = nfsd4_proc_null,
+ .pc_encode = nfs4svc_encode_voidres,
.pc_argsize = sizeof(struct nfsd4_voidargs),
.pc_ressize = sizeof(struct nfsd4_voidres),
.pc_cachetype = RC_NOCACHE,
.pc_xdrressize = 1,
},
[NFSPROC4_COMPOUND] = {
- .pc_func = (svc_procfunc) nfsd4_proc_compound,
- .pc_decode = (kxdrproc_t) nfs4svc_decode_compoundargs,
- .pc_encode = (kxdrproc_t) nfs4svc_encode_compoundres,
+ .pc_func = nfsd4_proc_compound,
+ .pc_decode = nfs4svc_decode_compoundargs,
+ .pc_encode = nfs4svc_encode_compoundres,
.pc_argsize = sizeof(struct nfsd4_compoundargs),
.pc_ressize = sizeof(struct nfsd4_compoundres),
.pc_release = nfsd4_release_compoundargs,
@@ -2536,10 +2552,12 @@
},
};
-struct svc_version nfsd_version4 = {
+static unsigned int nfsd_count3[ARRAY_SIZE(nfsd_procedures4)];
+const struct svc_version nfsd_version4 = {
.vs_vers = 4,
.vs_nproc = 2,
.vs_proc = nfsd_procedures4,
+ .vs_count = nfsd_count3,
.vs_dispatch = nfsd_dispatch,
.vs_xdrsize = NFS4_SVC_XDRSIZE,
.vs_rpcb_optnl = true,
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index 22002fb..0c04f81 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -2402,10 +2402,10 @@
}
__be32
-nfsd4_exchange_id(struct svc_rqst *rqstp,
- struct nfsd4_compound_state *cstate,
- struct nfsd4_exchange_id *exid)
+nfsd4_exchange_id(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
+ union nfsd4_op_u *u)
{
+ struct nfsd4_exchange_id *exid = &u->exchange_id;
struct nfs4_client *conf, *new;
struct nfs4_client *unconf = NULL;
__be32 status;
@@ -2698,9 +2698,9 @@
__be32
nfsd4_create_session(struct svc_rqst *rqstp,
- struct nfsd4_compound_state *cstate,
- struct nfsd4_create_session *cr_ses)
+ struct nfsd4_compound_state *cstate, union nfsd4_op_u *u)
{
+ struct nfsd4_create_session *cr_ses = &u->create_session;
struct sockaddr *sa = svc_addr(rqstp);
struct nfs4_client *conf, *unconf;
struct nfs4_client *old = NULL;
@@ -2824,8 +2824,11 @@
return nfserr_inval;
}
-__be32 nfsd4_backchannel_ctl(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate, struct nfsd4_backchannel_ctl *bc)
+__be32 nfsd4_backchannel_ctl(struct svc_rqst *rqstp,
+ struct nfsd4_compound_state *cstate,
+ union nfsd4_op_u *u)
{
+ struct nfsd4_backchannel_ctl *bc = &u->backchannel_ctl;
struct nfsd4_session *session = cstate->session;
struct nfsd_net *nn = net_generic(SVC_NET(rqstp), nfsd_net_id);
__be32 status;
@@ -2845,8 +2848,9 @@
__be32 nfsd4_bind_conn_to_session(struct svc_rqst *rqstp,
struct nfsd4_compound_state *cstate,
- struct nfsd4_bind_conn_to_session *bcts)
+ union nfsd4_op_u *u)
{
+ struct nfsd4_bind_conn_to_session *bcts = &u->bind_conn_to_session;
__be32 status;
struct nfsd4_conn *conn;
struct nfsd4_session *session;
@@ -2886,10 +2890,10 @@
}
__be32
-nfsd4_destroy_session(struct svc_rqst *r,
- struct nfsd4_compound_state *cstate,
- struct nfsd4_destroy_session *sessionid)
+nfsd4_destroy_session(struct svc_rqst *r, struct nfsd4_compound_state *cstate,
+ union nfsd4_op_u *u)
{
+ struct nfsd4_destroy_session *sessionid = &u->destroy_session;
struct nfsd4_session *ses;
__be32 status;
int ref_held_by_me = 0;
@@ -2983,10 +2987,10 @@
}
__be32
-nfsd4_sequence(struct svc_rqst *rqstp,
- struct nfsd4_compound_state *cstate,
- struct nfsd4_sequence *seq)
+nfsd4_sequence(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
+ union nfsd4_op_u *u)
{
+ struct nfsd4_sequence *seq = &u->sequence;
struct nfsd4_compoundres *resp = rqstp->rq_resp;
struct xdr_stream *xdr = &resp->xdr;
struct nfsd4_session *session;
@@ -3120,8 +3124,11 @@
}
__be32
-nfsd4_destroy_clientid(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate, struct nfsd4_destroy_clientid *dc)
+nfsd4_destroy_clientid(struct svc_rqst *rqstp,
+ struct nfsd4_compound_state *cstate,
+ union nfsd4_op_u *u)
{
+ struct nfsd4_destroy_clientid *dc = &u->destroy_clientid;
struct nfs4_client *conf, *unconf;
struct nfs4_client *clp = NULL;
__be32 status = 0;
@@ -3161,8 +3168,10 @@
}
__be32
-nfsd4_reclaim_complete(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate, struct nfsd4_reclaim_complete *rc)
+nfsd4_reclaim_complete(struct svc_rqst *rqstp,
+ struct nfsd4_compound_state *cstate, union nfsd4_op_u *u)
{
+ struct nfsd4_reclaim_complete *rc = &u->reclaim_complete;
__be32 status = 0;
if (rc->rca_one_fs) {
@@ -3199,8 +3208,9 @@
__be32
nfsd4_setclientid(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
- struct nfsd4_setclientid *setclid)
+ union nfsd4_op_u *u)
{
+ struct nfsd4_setclientid *setclid = &u->setclientid;
struct xdr_netobj clname = setclid->se_name;
nfs4_verifier clverifier = setclid->se_verf;
struct nfs4_client *conf, *new;
@@ -3257,9 +3267,11 @@
__be32
nfsd4_setclientid_confirm(struct svc_rqst *rqstp,
- struct nfsd4_compound_state *cstate,
- struct nfsd4_setclientid_confirm *setclientid_confirm)
+ struct nfsd4_compound_state *cstate,
+ union nfsd4_op_u *u)
{
+ struct nfsd4_setclientid_confirm *setclientid_confirm =
+ &u->setclientid_confirm;
struct nfs4_client *conf, *unconf;
struct nfs4_client *old = NULL;
nfs4_verifier confirm = setclientid_confirm->sc_confirm;
@@ -4506,8 +4518,9 @@
__be32
nfsd4_renew(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
- clientid_t *clid)
+ union nfsd4_op_u *u)
{
+ clientid_t *clid = &u->renew;
struct nfs4_client *clp;
__be32 status;
struct nfsd_net *nn = net_generic(SVC_NET(rqstp), nfsd_net_id);
@@ -4993,8 +5006,9 @@
*/
__be32
nfsd4_test_stateid(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
- struct nfsd4_test_stateid *test_stateid)
+ union nfsd4_op_u *u)
{
+ struct nfsd4_test_stateid *test_stateid = &u->test_stateid;
struct nfsd4_test_stateid_id *stateid;
struct nfs4_client *cl = cstate->session->se_client;
@@ -5033,8 +5047,9 @@
__be32
nfsd4_free_stateid(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
- struct nfsd4_free_stateid *free_stateid)
+ union nfsd4_op_u *u)
{
+ struct nfsd4_free_stateid *free_stateid = &u->free_stateid;
stateid_t *stateid = &free_stateid->fr_stateid;
struct nfs4_stid *s;
struct nfs4_delegation *dp;
@@ -5162,8 +5177,9 @@
__be32
nfsd4_open_confirm(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
- struct nfsd4_open_confirm *oc)
+ union nfsd4_op_u *u)
{
+ struct nfsd4_open_confirm *oc = &u->open_confirm;
__be32 status;
struct nfs4_openowner *oo;
struct nfs4_ol_stateid *stp;
@@ -5230,9 +5246,9 @@
__be32
nfsd4_open_downgrade(struct svc_rqst *rqstp,
- struct nfsd4_compound_state *cstate,
- struct nfsd4_open_downgrade *od)
+ struct nfsd4_compound_state *cstate, union nfsd4_op_u *u)
{
+ struct nfsd4_open_downgrade *od = &u->open_downgrade;
__be32 status;
struct nfs4_ol_stateid *stp;
struct nfsd_net *nn = net_generic(SVC_NET(rqstp), nfsd_net_id);
@@ -5300,8 +5316,9 @@
*/
__be32
nfsd4_close(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
- struct nfsd4_close *close)
+ union nfsd4_op_u *u)
{
+ struct nfsd4_close *close = &u->close;
__be32 status;
struct nfs4_ol_stateid *stp;
struct net *net = SVC_NET(rqstp);
@@ -5330,8 +5347,9 @@
__be32
nfsd4_delegreturn(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
- struct nfsd4_delegreturn *dr)
+ union nfsd4_op_u *u)
{
+ struct nfsd4_delegreturn *dr = &u->delegreturn;
struct nfs4_delegation *dp;
stateid_t *stateid = &dr->dr_stateid;
struct nfs4_stid *s;
@@ -5706,8 +5724,9 @@
*/
__be32
nfsd4_lock(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
- struct nfsd4_lock *lock)
+ union nfsd4_op_u *u)
{
+ struct nfsd4_lock *lock = &u->lock;
struct nfs4_openowner *open_sop = NULL;
struct nfs4_lockowner *lock_sop = NULL;
struct nfs4_ol_stateid *lock_stp = NULL;
@@ -5939,8 +5958,9 @@
*/
__be32
nfsd4_lockt(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
- struct nfsd4_lockt *lockt)
+ union nfsd4_op_u *u)
{
+ struct nfsd4_lockt *lockt = &u->lockt;
struct file_lock *file_lock = NULL;
struct nfs4_lockowner *lo = NULL;
__be32 status;
@@ -6012,8 +6032,9 @@
__be32
nfsd4_locku(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
- struct nfsd4_locku *locku)
+ union nfsd4_op_u *u)
{
+ struct nfsd4_locku *locku = &u->locku;
struct nfs4_ol_stateid *stp;
struct file *filp = NULL;
struct file_lock *file_lock = NULL;
@@ -6119,8 +6140,9 @@
__be32
nfsd4_release_lockowner(struct svc_rqst *rqstp,
struct nfsd4_compound_state *cstate,
- struct nfsd4_release_lockowner *rlockowner)
+ union nfsd4_op_u *u)
{
+ struct nfsd4_release_lockowner *rlockowner = &u->release_lockowner;
clientid_t *clid = &rlockowner->rl_clientid;
struct nfs4_stateowner *sop;
struct nfs4_lockowner *lo = NULL;
@@ -7103,27 +7125,31 @@
* functions to set current state id
*/
void
-nfsd4_set_opendowngradestateid(struct nfsd4_compound_state *cstate, struct nfsd4_open_downgrade *odp)
+nfsd4_set_opendowngradestateid(struct nfsd4_compound_state *cstate,
+ union nfsd4_op_u *u)
{
- put_stateid(cstate, &odp->od_stateid);
+ put_stateid(cstate, &u->open_downgrade.od_stateid);
}
void
-nfsd4_set_openstateid(struct nfsd4_compound_state *cstate, struct nfsd4_open *open)
+nfsd4_set_openstateid(struct nfsd4_compound_state *cstate,
+ union nfsd4_op_u *u)
{
- put_stateid(cstate, &open->op_stateid);
+ put_stateid(cstate, &u->open.op_stateid);
}
void
-nfsd4_set_closestateid(struct nfsd4_compound_state *cstate, struct nfsd4_close *close)
+nfsd4_set_closestateid(struct nfsd4_compound_state *cstate,
+ union nfsd4_op_u *u)
{
- put_stateid(cstate, &close->cl_stateid);
+ put_stateid(cstate, &u->close.cl_stateid);
}
void
-nfsd4_set_lockstateid(struct nfsd4_compound_state *cstate, struct nfsd4_lock *lock)
+nfsd4_set_lockstateid(struct nfsd4_compound_state *cstate,
+ union nfsd4_op_u *u)
{
- put_stateid(cstate, &lock->lk_resp_stateid);
+ put_stateid(cstate, &u->lock.lk_resp_stateid);
}
/*
@@ -7131,49 +7157,57 @@
*/
void
-nfsd4_get_opendowngradestateid(struct nfsd4_compound_state *cstate, struct nfsd4_open_downgrade *odp)
+nfsd4_get_opendowngradestateid(struct nfsd4_compound_state *cstate,
+ union nfsd4_op_u *u)
{
- get_stateid(cstate, &odp->od_stateid);
+ get_stateid(cstate, &u->open_downgrade.od_stateid);
}
void
-nfsd4_get_delegreturnstateid(struct nfsd4_compound_state *cstate, struct nfsd4_delegreturn *drp)
+nfsd4_get_delegreturnstateid(struct nfsd4_compound_state *cstate,
+ union nfsd4_op_u *u)
{
- get_stateid(cstate, &drp->dr_stateid);
+ get_stateid(cstate, &u->delegreturn.dr_stateid);
}
void
-nfsd4_get_freestateid(struct nfsd4_compound_state *cstate, struct nfsd4_free_stateid *fsp)
+nfsd4_get_freestateid(struct nfsd4_compound_state *cstate,
+ union nfsd4_op_u *u)
{
- get_stateid(cstate, &fsp->fr_stateid);
+ get_stateid(cstate, &u->free_stateid.fr_stateid);
}
void
-nfsd4_get_setattrstateid(struct nfsd4_compound_state *cstate, struct nfsd4_setattr *setattr)
+nfsd4_get_setattrstateid(struct nfsd4_compound_state *cstate,
+ union nfsd4_op_u *u)
{
- get_stateid(cstate, &setattr->sa_stateid);
+ get_stateid(cstate, &u->setattr.sa_stateid);
}
void
-nfsd4_get_closestateid(struct nfsd4_compound_state *cstate, struct nfsd4_close *close)
+nfsd4_get_closestateid(struct nfsd4_compound_state *cstate,
+ union nfsd4_op_u *u)
{
- get_stateid(cstate, &close->cl_stateid);
+ get_stateid(cstate, &u->close.cl_stateid);
}
void
-nfsd4_get_lockustateid(struct nfsd4_compound_state *cstate, struct nfsd4_locku *locku)
+nfsd4_get_lockustateid(struct nfsd4_compound_state *cstate,
+ union nfsd4_op_u *u)
{
- get_stateid(cstate, &locku->lu_stateid);
+ get_stateid(cstate, &u->locku.lu_stateid);
}
void
-nfsd4_get_readstateid(struct nfsd4_compound_state *cstate, struct nfsd4_read *read)
+nfsd4_get_readstateid(struct nfsd4_compound_state *cstate,
+ union nfsd4_op_u *u)
{
- get_stateid(cstate, &read->rd_stateid);
+ get_stateid(cstate, &u->read.rd_stateid);
}
void
-nfsd4_get_writestateid(struct nfsd4_compound_state *cstate, struct nfsd4_write *write)
+nfsd4_get_writestateid(struct nfsd4_compound_state *cstate,
+ union nfsd4_op_u *u)
{
- get_stateid(cstate, &write->wr_stateid);
+ get_stateid(cstate, &u->write.wr_stateid);
}
diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c
index 26780d5..20fbcab 100644
--- a/fs/nfsd/nfs4xdr.c
+++ b/fs/nfsd/nfs4xdr.c
@@ -1973,7 +1973,7 @@
*p++ = cpu_to_be32(convert_to_wallclock(exp->cd->flush_time));
*p++ = 0;
} else if (IS_I_VERSION(inode)) {
- p = xdr_encode_hyper(p, inode->i_version);
+ p = xdr_encode_hyper(p, nfsd4_change_attribute(inode));
} else {
*p++ = cpu_to_be32(stat->ctime.tv_sec);
*p++ = cpu_to_be32(stat->ctime.tv_nsec);
@@ -4538,14 +4538,13 @@
}
int
-nfs4svc_encode_voidres(struct svc_rqst *rqstp, __be32 *p, void *dummy)
+nfs4svc_encode_voidres(struct svc_rqst *rqstp, __be32 *p)
{
return xdr_ressize_check(rqstp, p);
}
-int nfsd4_release_compoundargs(void *rq, __be32 *p, void *resp)
+void nfsd4_release_compoundargs(struct svc_rqst *rqstp)
{
- struct svc_rqst *rqstp = rq;
struct nfsd4_compoundargs *args = rqstp->rq_argp;
if (args->ops != args->iops) {
@@ -4559,12 +4558,13 @@
args->to_free = tb->next;
kfree(tb);
}
- return 1;
}
int
-nfs4svc_decode_compoundargs(struct svc_rqst *rqstp, __be32 *p, struct nfsd4_compoundargs *args)
+nfs4svc_decode_compoundargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd4_compoundargs *args = rqstp->rq_argp;
+
if (rqstp->rq_arg.head[0].iov_len % 4) {
/* client is nuts */
dprintk("%s: compound not properly padded! (peeraddr=%pISc xid=0x%x)",
@@ -4584,11 +4584,12 @@
}
int
-nfs4svc_encode_compoundres(struct svc_rqst *rqstp, __be32 *p, struct nfsd4_compoundres *resp)
+nfs4svc_encode_compoundres(struct svc_rqst *rqstp, __be32 *p)
{
/*
* All that remains is to write the tag and operation count...
*/
+ struct nfsd4_compoundres *resp = rqstp->rq_resp;
struct xdr_buf *buf = resp->xdr.buf;
WARN_ON_ONCE(buf->len != buf->head[0].iov_len + buf->page_len +
diff --git a/fs/nfsd/nfsd.h b/fs/nfsd/nfsd.h
index d966068..b9c538a 100644
--- a/fs/nfsd/nfsd.h
+++ b/fs/nfsd/nfsd.h
@@ -60,7 +60,7 @@
extern struct svc_program nfsd_program;
-extern struct svc_version nfsd_version2, nfsd_version3,
+extern const struct svc_version nfsd_version2, nfsd_version3,
nfsd_version4;
extern struct mutex nfsd_mutex;
extern spinlock_t nfsd_drc_lock;
@@ -86,12 +86,12 @@
#if defined(CONFIG_NFSD_V2_ACL) || defined(CONFIG_NFSD_V3_ACL)
#ifdef CONFIG_NFSD_V2_ACL
-extern struct svc_version nfsd_acl_version2;
+extern const struct svc_version nfsd_acl_version2;
#else
#define nfsd_acl_version2 NULL
#endif
#ifdef CONFIG_NFSD_V3_ACL
-extern struct svc_version nfsd_acl_version3;
+extern const struct svc_version nfsd_acl_version3;
#else
#define nfsd_acl_version3 NULL
#endif
diff --git a/fs/nfsd/nfsfh.h b/fs/nfsd/nfsfh.h
index f84fe6b..e47cf6c 100644
--- a/fs/nfsd/nfsfh.h
+++ b/fs/nfsd/nfsfh.h
@@ -241,6 +241,28 @@
}
/*
+ * We could use i_version alone as the change attribute. However,
+ * i_version can go backwards after a reboot. On its own that doesn't
+ * necessarily cause a problem, but if i_version goes backwards and then
+ * is incremented again it could reuse a value that was previously used
+ * before boot, and a client who queried the two values might
+ * incorrectly assume nothing changed.
+ *
+ * By using both ctime and the i_version counter we guarantee that as
+ * long as time doesn't go backwards we never reuse an old value.
+ */
+static inline u64 nfsd4_change_attribute(struct inode *inode)
+{
+ u64 chattr;
+
+ chattr = inode->i_ctime.tv_sec;
+ chattr <<= 30;
+ chattr += inode->i_ctime.tv_nsec;
+ chattr += inode->i_version;
+ return chattr;
+}
+
+/*
* Fill in the pre_op attr for the wcc data
*/
static inline void
@@ -253,7 +275,7 @@
fhp->fh_pre_mtime = inode->i_mtime;
fhp->fh_pre_ctime = inode->i_ctime;
fhp->fh_pre_size = inode->i_size;
- fhp->fh_pre_change = inode->i_version;
+ fhp->fh_pre_change = nfsd4_change_attribute(inode);
fhp->fh_pre_saved = true;
}
}
diff --git a/fs/nfsd/nfsproc.c b/fs/nfsd/nfsproc.c
index 03a7e9d..5076ae2 100644
--- a/fs/nfsd/nfsproc.c
+++ b/fs/nfsd/nfsproc.c
@@ -17,7 +17,7 @@
static __be32
-nfsd_proc_null(struct svc_rqst *rqstp, void *argp, void *resp)
+nfsd_proc_null(struct svc_rqst *rqstp)
{
return nfs_ok;
}
@@ -39,9 +39,10 @@
* N.B. After this call resp->fh needs an fh_put
*/
static __be32
-nfsd_proc_getattr(struct svc_rqst *rqstp, struct nfsd_fhandle *argp,
- struct nfsd_attrstat *resp)
+nfsd_proc_getattr(struct svc_rqst *rqstp)
{
+ struct nfsd_fhandle *argp = rqstp->rq_argp;
+ struct nfsd_attrstat *resp = rqstp->rq_resp;
__be32 nfserr;
dprintk("nfsd: GETATTR %s\n", SVCFH_fmt(&argp->fh));
@@ -56,9 +57,10 @@
* N.B. After this call resp->fh needs an fh_put
*/
static __be32
-nfsd_proc_setattr(struct svc_rqst *rqstp, struct nfsd_sattrargs *argp,
- struct nfsd_attrstat *resp)
+nfsd_proc_setattr(struct svc_rqst *rqstp)
{
+ struct nfsd_sattrargs *argp = rqstp->rq_argp;
+ struct nfsd_attrstat *resp = rqstp->rq_resp;
struct iattr *iap = &argp->attrs;
struct svc_fh *fhp;
__be32 nfserr;
@@ -122,9 +124,10 @@
* N.B. After this call resp->fh needs an fh_put
*/
static __be32
-nfsd_proc_lookup(struct svc_rqst *rqstp, struct nfsd_diropargs *argp,
- struct nfsd_diropres *resp)
+nfsd_proc_lookup(struct svc_rqst *rqstp)
{
+ struct nfsd_diropargs *argp = rqstp->rq_argp;
+ struct nfsd_diropres *resp = rqstp->rq_resp;
__be32 nfserr;
dprintk("nfsd: LOOKUP %s %.*s\n",
@@ -142,9 +145,10 @@
* Read a symlink.
*/
static __be32
-nfsd_proc_readlink(struct svc_rqst *rqstp, struct nfsd_readlinkargs *argp,
- struct nfsd_readlinkres *resp)
+nfsd_proc_readlink(struct svc_rqst *rqstp)
{
+ struct nfsd_readlinkargs *argp = rqstp->rq_argp;
+ struct nfsd_readlinkres *resp = rqstp->rq_resp;
__be32 nfserr;
dprintk("nfsd: READLINK %s\n", SVCFH_fmt(&argp->fh));
@@ -162,9 +166,10 @@
* N.B. After this call resp->fh needs an fh_put
*/
static __be32
-nfsd_proc_read(struct svc_rqst *rqstp, struct nfsd_readargs *argp,
- struct nfsd_readres *resp)
+nfsd_proc_read(struct svc_rqst *rqstp)
{
+ struct nfsd_readargs *argp = rqstp->rq_argp;
+ struct nfsd_readres *resp = rqstp->rq_resp;
__be32 nfserr;
dprintk("nfsd: READ %s %d bytes at %d\n",
@@ -200,9 +205,10 @@
* N.B. After this call resp->fh needs an fh_put
*/
static __be32
-nfsd_proc_write(struct svc_rqst *rqstp, struct nfsd_writeargs *argp,
- struct nfsd_attrstat *resp)
+nfsd_proc_write(struct svc_rqst *rqstp)
{
+ struct nfsd_writeargs *argp = rqstp->rq_argp;
+ struct nfsd_attrstat *resp = rqstp->rq_resp;
__be32 nfserr;
unsigned long cnt = argp->len;
@@ -222,9 +228,10 @@
* N.B. After this call _both_ argp->fh and resp->fh need an fh_put
*/
static __be32
-nfsd_proc_create(struct svc_rqst *rqstp, struct nfsd_createargs *argp,
- struct nfsd_diropres *resp)
+nfsd_proc_create(struct svc_rqst *rqstp)
{
+ struct nfsd_createargs *argp = rqstp->rq_argp;
+ struct nfsd_diropres *resp = rqstp->rq_resp;
svc_fh *dirfhp = &argp->fh;
svc_fh *newfhp = &resp->fh;
struct iattr *attr = &argp->attrs;
@@ -377,9 +384,9 @@
}
static __be32
-nfsd_proc_remove(struct svc_rqst *rqstp, struct nfsd_diropargs *argp,
- void *resp)
+nfsd_proc_remove(struct svc_rqst *rqstp)
{
+ struct nfsd_diropargs *argp = rqstp->rq_argp;
__be32 nfserr;
dprintk("nfsd: REMOVE %s %.*s\n", SVCFH_fmt(&argp->fh),
@@ -392,9 +399,9 @@
}
static __be32
-nfsd_proc_rename(struct svc_rqst *rqstp, struct nfsd_renameargs *argp,
- void *resp)
+nfsd_proc_rename(struct svc_rqst *rqstp)
{
+ struct nfsd_renameargs *argp = rqstp->rq_argp;
__be32 nfserr;
dprintk("nfsd: RENAME %s %.*s -> \n",
@@ -410,9 +417,9 @@
}
static __be32
-nfsd_proc_link(struct svc_rqst *rqstp, struct nfsd_linkargs *argp,
- void *resp)
+nfsd_proc_link(struct svc_rqst *rqstp)
{
+ struct nfsd_linkargs *argp = rqstp->rq_argp;
__be32 nfserr;
dprintk("nfsd: LINK %s ->\n",
@@ -430,9 +437,9 @@
}
static __be32
-nfsd_proc_symlink(struct svc_rqst *rqstp, struct nfsd_symlinkargs *argp,
- void *resp)
+nfsd_proc_symlink(struct svc_rqst *rqstp)
{
+ struct nfsd_symlinkargs *argp = rqstp->rq_argp;
struct svc_fh newfh;
__be32 nfserr;
@@ -460,9 +467,10 @@
* N.B. After this call resp->fh needs an fh_put
*/
static __be32
-nfsd_proc_mkdir(struct svc_rqst *rqstp, struct nfsd_createargs *argp,
- struct nfsd_diropres *resp)
+nfsd_proc_mkdir(struct svc_rqst *rqstp)
{
+ struct nfsd_createargs *argp = rqstp->rq_argp;
+ struct nfsd_diropres *resp = rqstp->rq_resp;
__be32 nfserr;
dprintk("nfsd: MKDIR %s %.*s\n", SVCFH_fmt(&argp->fh), argp->len, argp->name);
@@ -484,9 +492,9 @@
* Remove a directory
*/
static __be32
-nfsd_proc_rmdir(struct svc_rqst *rqstp, struct nfsd_diropargs *argp,
- void *resp)
+nfsd_proc_rmdir(struct svc_rqst *rqstp)
{
+ struct nfsd_diropargs *argp = rqstp->rq_argp;
__be32 nfserr;
dprintk("nfsd: RMDIR %s %.*s\n", SVCFH_fmt(&argp->fh), argp->len, argp->name);
@@ -500,9 +508,10 @@
* Read a portion of a directory.
*/
static __be32
-nfsd_proc_readdir(struct svc_rqst *rqstp, struct nfsd_readdirargs *argp,
- struct nfsd_readdirres *resp)
+nfsd_proc_readdir(struct svc_rqst *rqstp)
{
+ struct nfsd_readdirargs *argp = rqstp->rq_argp;
+ struct nfsd_readdirres *resp = rqstp->rq_resp;
int count;
__be32 nfserr;
loff_t offset;
@@ -540,9 +549,10 @@
* Get file system info
*/
static __be32
-nfsd_proc_statfs(struct svc_rqst * rqstp, struct nfsd_fhandle *argp,
- struct nfsd_statfsres *resp)
+nfsd_proc_statfs(struct svc_rqst *rqstp)
{
+ struct nfsd_fhandle *argp = rqstp->rq_argp;
+ struct nfsd_statfsres *resp = rqstp->rq_resp;
__be32 nfserr;
dprintk("nfsd: STATFS %s\n", SVCFH_fmt(&argp->fh));
@@ -563,168 +573,168 @@
#define FH 8 /* filehandle */
#define AT 18 /* attributes */
-static struct svc_procedure nfsd_procedures2[18] = {
+static const struct svc_procedure nfsd_procedures2[18] = {
[NFSPROC_NULL] = {
- .pc_func = (svc_procfunc) nfsd_proc_null,
- .pc_decode = (kxdrproc_t) nfssvc_decode_void,
- .pc_encode = (kxdrproc_t) nfssvc_encode_void,
+ .pc_func = nfsd_proc_null,
+ .pc_decode = nfssvc_decode_void,
+ .pc_encode = nfssvc_encode_void,
.pc_argsize = sizeof(struct nfsd_void),
.pc_ressize = sizeof(struct nfsd_void),
.pc_cachetype = RC_NOCACHE,
.pc_xdrressize = ST,
},
[NFSPROC_GETATTR] = {
- .pc_func = (svc_procfunc) nfsd_proc_getattr,
- .pc_decode = (kxdrproc_t) nfssvc_decode_fhandle,
- .pc_encode = (kxdrproc_t) nfssvc_encode_attrstat,
- .pc_release = (kxdrproc_t) nfssvc_release_fhandle,
+ .pc_func = nfsd_proc_getattr,
+ .pc_decode = nfssvc_decode_fhandle,
+ .pc_encode = nfssvc_encode_attrstat,
+ .pc_release = nfssvc_release_fhandle,
.pc_argsize = sizeof(struct nfsd_fhandle),
.pc_ressize = sizeof(struct nfsd_attrstat),
.pc_cachetype = RC_NOCACHE,
.pc_xdrressize = ST+AT,
},
[NFSPROC_SETATTR] = {
- .pc_func = (svc_procfunc) nfsd_proc_setattr,
- .pc_decode = (kxdrproc_t) nfssvc_decode_sattrargs,
- .pc_encode = (kxdrproc_t) nfssvc_encode_attrstat,
- .pc_release = (kxdrproc_t) nfssvc_release_fhandle,
+ .pc_func = nfsd_proc_setattr,
+ .pc_decode = nfssvc_decode_sattrargs,
+ .pc_encode = nfssvc_encode_attrstat,
+ .pc_release = nfssvc_release_fhandle,
.pc_argsize = sizeof(struct nfsd_sattrargs),
.pc_ressize = sizeof(struct nfsd_attrstat),
.pc_cachetype = RC_REPLBUFF,
.pc_xdrressize = ST+AT,
},
[NFSPROC_ROOT] = {
- .pc_decode = (kxdrproc_t) nfssvc_decode_void,
- .pc_encode = (kxdrproc_t) nfssvc_encode_void,
+ .pc_decode = nfssvc_decode_void,
+ .pc_encode = nfssvc_encode_void,
.pc_argsize = sizeof(struct nfsd_void),
.pc_ressize = sizeof(struct nfsd_void),
.pc_cachetype = RC_NOCACHE,
.pc_xdrressize = ST,
},
[NFSPROC_LOOKUP] = {
- .pc_func = (svc_procfunc) nfsd_proc_lookup,
- .pc_decode = (kxdrproc_t) nfssvc_decode_diropargs,
- .pc_encode = (kxdrproc_t) nfssvc_encode_diropres,
- .pc_release = (kxdrproc_t) nfssvc_release_fhandle,
+ .pc_func = nfsd_proc_lookup,
+ .pc_decode = nfssvc_decode_diropargs,
+ .pc_encode = nfssvc_encode_diropres,
+ .pc_release = nfssvc_release_fhandle,
.pc_argsize = sizeof(struct nfsd_diropargs),
.pc_ressize = sizeof(struct nfsd_diropres),
.pc_cachetype = RC_NOCACHE,
.pc_xdrressize = ST+FH+AT,
},
[NFSPROC_READLINK] = {
- .pc_func = (svc_procfunc) nfsd_proc_readlink,
- .pc_decode = (kxdrproc_t) nfssvc_decode_readlinkargs,
- .pc_encode = (kxdrproc_t) nfssvc_encode_readlinkres,
+ .pc_func = nfsd_proc_readlink,
+ .pc_decode = nfssvc_decode_readlinkargs,
+ .pc_encode = nfssvc_encode_readlinkres,
.pc_argsize = sizeof(struct nfsd_readlinkargs),
.pc_ressize = sizeof(struct nfsd_readlinkres),
.pc_cachetype = RC_NOCACHE,
.pc_xdrressize = ST+1+NFS_MAXPATHLEN/4,
},
[NFSPROC_READ] = {
- .pc_func = (svc_procfunc) nfsd_proc_read,
- .pc_decode = (kxdrproc_t) nfssvc_decode_readargs,
- .pc_encode = (kxdrproc_t) nfssvc_encode_readres,
- .pc_release = (kxdrproc_t) nfssvc_release_fhandle,
+ .pc_func = nfsd_proc_read,
+ .pc_decode = nfssvc_decode_readargs,
+ .pc_encode = nfssvc_encode_readres,
+ .pc_release = nfssvc_release_fhandle,
.pc_argsize = sizeof(struct nfsd_readargs),
.pc_ressize = sizeof(struct nfsd_readres),
.pc_cachetype = RC_NOCACHE,
.pc_xdrressize = ST+AT+1+NFSSVC_MAXBLKSIZE_V2/4,
},
[NFSPROC_WRITECACHE] = {
- .pc_decode = (kxdrproc_t) nfssvc_decode_void,
- .pc_encode = (kxdrproc_t) nfssvc_encode_void,
+ .pc_decode = nfssvc_decode_void,
+ .pc_encode = nfssvc_encode_void,
.pc_argsize = sizeof(struct nfsd_void),
.pc_ressize = sizeof(struct nfsd_void),
.pc_cachetype = RC_NOCACHE,
.pc_xdrressize = ST,
},
[NFSPROC_WRITE] = {
- .pc_func = (svc_procfunc) nfsd_proc_write,
- .pc_decode = (kxdrproc_t) nfssvc_decode_writeargs,
- .pc_encode = (kxdrproc_t) nfssvc_encode_attrstat,
- .pc_release = (kxdrproc_t) nfssvc_release_fhandle,
+ .pc_func = nfsd_proc_write,
+ .pc_decode = nfssvc_decode_writeargs,
+ .pc_encode = nfssvc_encode_attrstat,
+ .pc_release = nfssvc_release_fhandle,
.pc_argsize = sizeof(struct nfsd_writeargs),
.pc_ressize = sizeof(struct nfsd_attrstat),
.pc_cachetype = RC_REPLBUFF,
.pc_xdrressize = ST+AT,
},
[NFSPROC_CREATE] = {
- .pc_func = (svc_procfunc) nfsd_proc_create,
- .pc_decode = (kxdrproc_t) nfssvc_decode_createargs,
- .pc_encode = (kxdrproc_t) nfssvc_encode_diropres,
- .pc_release = (kxdrproc_t) nfssvc_release_fhandle,
+ .pc_func = nfsd_proc_create,
+ .pc_decode = nfssvc_decode_createargs,
+ .pc_encode = nfssvc_encode_diropres,
+ .pc_release = nfssvc_release_fhandle,
.pc_argsize = sizeof(struct nfsd_createargs),
.pc_ressize = sizeof(struct nfsd_diropres),
.pc_cachetype = RC_REPLBUFF,
.pc_xdrressize = ST+FH+AT,
},
[NFSPROC_REMOVE] = {
- .pc_func = (svc_procfunc) nfsd_proc_remove,
- .pc_decode = (kxdrproc_t) nfssvc_decode_diropargs,
- .pc_encode = (kxdrproc_t) nfssvc_encode_void,
+ .pc_func = nfsd_proc_remove,
+ .pc_decode = nfssvc_decode_diropargs,
+ .pc_encode = nfssvc_encode_void,
.pc_argsize = sizeof(struct nfsd_diropargs),
.pc_ressize = sizeof(struct nfsd_void),
.pc_cachetype = RC_REPLSTAT,
.pc_xdrressize = ST,
},
[NFSPROC_RENAME] = {
- .pc_func = (svc_procfunc) nfsd_proc_rename,
- .pc_decode = (kxdrproc_t) nfssvc_decode_renameargs,
- .pc_encode = (kxdrproc_t) nfssvc_encode_void,
+ .pc_func = nfsd_proc_rename,
+ .pc_decode = nfssvc_decode_renameargs,
+ .pc_encode = nfssvc_encode_void,
.pc_argsize = sizeof(struct nfsd_renameargs),
.pc_ressize = sizeof(struct nfsd_void),
.pc_cachetype = RC_REPLSTAT,
.pc_xdrressize = ST,
},
[NFSPROC_LINK] = {
- .pc_func = (svc_procfunc) nfsd_proc_link,
- .pc_decode = (kxdrproc_t) nfssvc_decode_linkargs,
- .pc_encode = (kxdrproc_t) nfssvc_encode_void,
+ .pc_func = nfsd_proc_link,
+ .pc_decode = nfssvc_decode_linkargs,
+ .pc_encode = nfssvc_encode_void,
.pc_argsize = sizeof(struct nfsd_linkargs),
.pc_ressize = sizeof(struct nfsd_void),
.pc_cachetype = RC_REPLSTAT,
.pc_xdrressize = ST,
},
[NFSPROC_SYMLINK] = {
- .pc_func = (svc_procfunc) nfsd_proc_symlink,
- .pc_decode = (kxdrproc_t) nfssvc_decode_symlinkargs,
- .pc_encode = (kxdrproc_t) nfssvc_encode_void,
+ .pc_func = nfsd_proc_symlink,
+ .pc_decode = nfssvc_decode_symlinkargs,
+ .pc_encode = nfssvc_encode_void,
.pc_argsize = sizeof(struct nfsd_symlinkargs),
.pc_ressize = sizeof(struct nfsd_void),
.pc_cachetype = RC_REPLSTAT,
.pc_xdrressize = ST,
},
[NFSPROC_MKDIR] = {
- .pc_func = (svc_procfunc) nfsd_proc_mkdir,
- .pc_decode = (kxdrproc_t) nfssvc_decode_createargs,
- .pc_encode = (kxdrproc_t) nfssvc_encode_diropres,
- .pc_release = (kxdrproc_t) nfssvc_release_fhandle,
+ .pc_func = nfsd_proc_mkdir,
+ .pc_decode = nfssvc_decode_createargs,
+ .pc_encode = nfssvc_encode_diropres,
+ .pc_release = nfssvc_release_fhandle,
.pc_argsize = sizeof(struct nfsd_createargs),
.pc_ressize = sizeof(struct nfsd_diropres),
.pc_cachetype = RC_REPLBUFF,
.pc_xdrressize = ST+FH+AT,
},
[NFSPROC_RMDIR] = {
- .pc_func = (svc_procfunc) nfsd_proc_rmdir,
- .pc_decode = (kxdrproc_t) nfssvc_decode_diropargs,
- .pc_encode = (kxdrproc_t) nfssvc_encode_void,
+ .pc_func = nfsd_proc_rmdir,
+ .pc_decode = nfssvc_decode_diropargs,
+ .pc_encode = nfssvc_encode_void,
.pc_argsize = sizeof(struct nfsd_diropargs),
.pc_ressize = sizeof(struct nfsd_void),
.pc_cachetype = RC_REPLSTAT,
.pc_xdrressize = ST,
},
[NFSPROC_READDIR] = {
- .pc_func = (svc_procfunc) nfsd_proc_readdir,
- .pc_decode = (kxdrproc_t) nfssvc_decode_readdirargs,
- .pc_encode = (kxdrproc_t) nfssvc_encode_readdirres,
+ .pc_func = nfsd_proc_readdir,
+ .pc_decode = nfssvc_decode_readdirargs,
+ .pc_encode = nfssvc_encode_readdirres,
.pc_argsize = sizeof(struct nfsd_readdirargs),
.pc_ressize = sizeof(struct nfsd_readdirres),
.pc_cachetype = RC_NOCACHE,
},
[NFSPROC_STATFS] = {
- .pc_func = (svc_procfunc) nfsd_proc_statfs,
- .pc_decode = (kxdrproc_t) nfssvc_decode_fhandle,
- .pc_encode = (kxdrproc_t) nfssvc_encode_statfsres,
+ .pc_func = nfsd_proc_statfs,
+ .pc_decode = nfssvc_decode_fhandle,
+ .pc_encode = nfssvc_encode_statfsres,
.pc_argsize = sizeof(struct nfsd_fhandle),
.pc_ressize = sizeof(struct nfsd_statfsres),
.pc_cachetype = RC_NOCACHE,
@@ -733,12 +743,14 @@
};
-struct svc_version nfsd_version2 = {
- .vs_vers = 2,
- .vs_nproc = 18,
- .vs_proc = nfsd_procedures2,
- .vs_dispatch = nfsd_dispatch,
- .vs_xdrsize = NFS2_SVC_XDRSIZE,
+static unsigned int nfsd_count2[ARRAY_SIZE(nfsd_procedures2)];
+const struct svc_version nfsd_version2 = {
+ .vs_vers = 2,
+ .vs_nproc = 18,
+ .vs_proc = nfsd_procedures2,
+ .vs_count = nfsd_count2,
+ .vs_dispatch = nfsd_dispatch,
+ .vs_xdrsize = NFS2_SVC_XDRSIZE,
};
/*
diff --git a/fs/nfsd/nfssvc.c b/fs/nfsd/nfssvc.c
index 59979f0..063ae7d 100644
--- a/fs/nfsd/nfssvc.c
+++ b/fs/nfsd/nfssvc.c
@@ -68,14 +68,14 @@
#if defined(CONFIG_NFSD_V2_ACL) || defined(CONFIG_NFSD_V3_ACL)
static struct svc_stat nfsd_acl_svcstats;
-static struct svc_version * nfsd_acl_version[] = {
+static const struct svc_version *nfsd_acl_version[] = {
[2] = &nfsd_acl_version2,
[3] = &nfsd_acl_version3,
};
#define NFSD_ACL_MINVERS 2
#define NFSD_ACL_NRVERS ARRAY_SIZE(nfsd_acl_version)
-static struct svc_version *nfsd_acl_versions[NFSD_ACL_NRVERS];
+static const struct svc_version *nfsd_acl_versions[NFSD_ACL_NRVERS];
static struct svc_program nfsd_acl_program = {
.pg_prog = NFS_ACL_PROGRAM,
@@ -92,7 +92,7 @@
};
#endif /* defined(CONFIG_NFSD_V2_ACL) || defined(CONFIG_NFSD_V3_ACL) */
-static struct svc_version * nfsd_version[] = {
+static const struct svc_version *nfsd_version[] = {
[2] = &nfsd_version2,
#if defined(CONFIG_NFSD_V3)
[3] = &nfsd_version3,
@@ -104,7 +104,7 @@
#define NFSD_MINVERS 2
#define NFSD_NRVERS ARRAY_SIZE(nfsd_version)
-static struct svc_version *nfsd_versions[NFSD_NRVERS];
+static const struct svc_version *nfsd_versions[NFSD_NRVERS];
struct svc_program nfsd_program = {
#if defined(CONFIG_NFSD_V2_ACL) || defined(CONFIG_NFSD_V3_ACL)
@@ -756,7 +756,7 @@
* problem, we enforce these assumptions here:
*/
static bool nfs_request_too_big(struct svc_rqst *rqstp,
- struct svc_procedure *proc)
+ const struct svc_procedure *proc)
{
/*
* The ACL code has more careful bounds-checking and is not
@@ -781,8 +781,7 @@
int
nfsd_dispatch(struct svc_rqst *rqstp, __be32 *statp)
{
- struct svc_procedure *proc;
- kxdrproc_t xdr;
+ const struct svc_procedure *proc;
__be32 nfserr;
__be32 *nfserrp;
@@ -801,9 +800,8 @@
*/
rqstp->rq_cachetype = proc->pc_cachetype;
/* Decode arguments */
- xdr = proc->pc_decode;
- if (xdr && !xdr(rqstp, (__be32*)rqstp->rq_arg.head[0].iov_base,
- rqstp->rq_argp)) {
+ if (proc->pc_decode &&
+ !proc->pc_decode(rqstp, (__be32*)rqstp->rq_arg.head[0].iov_base)) {
dprintk("nfsd: failed to decode arguments!\n");
*statp = rpc_garbage_args;
return 1;
@@ -827,7 +825,7 @@
rqstp->rq_res.head[0].iov_len += sizeof(__be32);
/* Now call the procedure handler, and encode NFS status. */
- nfserr = proc->pc_func(rqstp, rqstp->rq_argp, rqstp->rq_resp);
+ nfserr = proc->pc_func(rqstp);
nfserr = map_new_errors(rqstp->rq_vers, nfserr);
if (nfserr == nfserr_dropit || test_bit(RQ_DROPME, &rqstp->rq_flags)) {
dprintk("nfsd: Dropping request; may be revisited later\n");
@@ -842,9 +840,7 @@
* For NFSv2, additional info is never returned in case of an error.
*/
if (!(nfserr && rqstp->rq_vers == 2)) {
- xdr = proc->pc_encode;
- if (xdr && !xdr(rqstp, nfserrp,
- rqstp->rq_resp)) {
+ if (proc->pc_encode && !proc->pc_encode(rqstp, nfserrp)) {
/* Failed to encode result. Release cache entry */
dprintk("nfsd: failed to encode result!\n");
nfsd_cache_update(rqstp, RC_NOCACHE, NULL);
diff --git a/fs/nfsd/nfsxdr.c b/fs/nfsd/nfsxdr.c
index de07ff6..e4da271 100644
--- a/fs/nfsd/nfsxdr.c
+++ b/fs/nfsd/nfsxdr.c
@@ -206,14 +206,16 @@
* XDR decode functions
*/
int
-nfssvc_decode_void(struct svc_rqst *rqstp, __be32 *p, void *dummy)
+nfssvc_decode_void(struct svc_rqst *rqstp, __be32 *p)
{
return xdr_argsize_check(rqstp, p);
}
int
-nfssvc_decode_fhandle(struct svc_rqst *rqstp, __be32 *p, struct nfsd_fhandle *args)
+nfssvc_decode_fhandle(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd_fhandle *args = rqstp->rq_argp;
+
p = decode_fh(p, &args->fh);
if (!p)
return 0;
@@ -221,9 +223,10 @@
}
int
-nfssvc_decode_sattrargs(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd_sattrargs *args)
+nfssvc_decode_sattrargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd_sattrargs *args = rqstp->rq_argp;
+
p = decode_fh(p, &args->fh);
if (!p)
return 0;
@@ -233,9 +236,10 @@
}
int
-nfssvc_decode_diropargs(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd_diropargs *args)
+nfssvc_decode_diropargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd_diropargs *args = rqstp->rq_argp;
+
if (!(p = decode_fh(p, &args->fh))
|| !(p = decode_filename(p, &args->name, &args->len)))
return 0;
@@ -244,9 +248,9 @@
}
int
-nfssvc_decode_readargs(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd_readargs *args)
+nfssvc_decode_readargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd_readargs *args = rqstp->rq_argp;
unsigned int len;
int v;
p = decode_fh(p, &args->fh);
@@ -276,9 +280,9 @@
}
int
-nfssvc_decode_writeargs(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd_writeargs *args)
+nfssvc_decode_writeargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd_writeargs *args = rqstp->rq_argp;
unsigned int len, hdr, dlen;
struct kvec *head = rqstp->rq_arg.head;
int v;
@@ -332,9 +336,10 @@
}
int
-nfssvc_decode_createargs(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd_createargs *args)
+nfssvc_decode_createargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd_createargs *args = rqstp->rq_argp;
+
if ( !(p = decode_fh(p, &args->fh))
|| !(p = decode_filename(p, &args->name, &args->len)))
return 0;
@@ -344,9 +349,10 @@
}
int
-nfssvc_decode_renameargs(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd_renameargs *args)
+nfssvc_decode_renameargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd_renameargs *args = rqstp->rq_argp;
+
if (!(p = decode_fh(p, &args->ffh))
|| !(p = decode_filename(p, &args->fname, &args->flen))
|| !(p = decode_fh(p, &args->tfh))
@@ -357,8 +363,10 @@
}
int
-nfssvc_decode_readlinkargs(struct svc_rqst *rqstp, __be32 *p, struct nfsd_readlinkargs *args)
+nfssvc_decode_readlinkargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd_readlinkargs *args = rqstp->rq_argp;
+
p = decode_fh(p, &args->fh);
if (!p)
return 0;
@@ -368,9 +376,10 @@
}
int
-nfssvc_decode_linkargs(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd_linkargs *args)
+nfssvc_decode_linkargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd_linkargs *args = rqstp->rq_argp;
+
if (!(p = decode_fh(p, &args->ffh))
|| !(p = decode_fh(p, &args->tfh))
|| !(p = decode_filename(p, &args->tname, &args->tlen)))
@@ -380,9 +389,10 @@
}
int
-nfssvc_decode_symlinkargs(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd_symlinkargs *args)
+nfssvc_decode_symlinkargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd_symlinkargs *args = rqstp->rq_argp;
+
if ( !(p = decode_fh(p, &args->ffh))
|| !(p = decode_filename(p, &args->fname, &args->flen))
|| !(p = decode_pathname(p, &args->tname, &args->tlen)))
@@ -393,9 +403,10 @@
}
int
-nfssvc_decode_readdirargs(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd_readdirargs *args)
+nfssvc_decode_readdirargs(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd_readdirargs *args = rqstp->rq_argp;
+
p = decode_fh(p, &args->fh);
if (!p)
return 0;
@@ -411,32 +422,35 @@
* XDR encode functions
*/
int
-nfssvc_encode_void(struct svc_rqst *rqstp, __be32 *p, void *dummy)
+nfssvc_encode_void(struct svc_rqst *rqstp, __be32 *p)
{
return xdr_ressize_check(rqstp, p);
}
int
-nfssvc_encode_attrstat(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd_attrstat *resp)
+nfssvc_encode_attrstat(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd_attrstat *resp = rqstp->rq_resp;
+
p = encode_fattr(rqstp, p, &resp->fh, &resp->stat);
return xdr_ressize_check(rqstp, p);
}
int
-nfssvc_encode_diropres(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd_diropres *resp)
+nfssvc_encode_diropres(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd_diropres *resp = rqstp->rq_resp;
+
p = encode_fh(p, &resp->fh);
p = encode_fattr(rqstp, p, &resp->fh, &resp->stat);
return xdr_ressize_check(rqstp, p);
}
int
-nfssvc_encode_readlinkres(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd_readlinkres *resp)
+nfssvc_encode_readlinkres(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd_readlinkres *resp = rqstp->rq_resp;
+
*p++ = htonl(resp->len);
xdr_ressize_check(rqstp, p);
rqstp->rq_res.page_len = resp->len;
@@ -450,9 +464,10 @@
}
int
-nfssvc_encode_readres(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd_readres *resp)
+nfssvc_encode_readres(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd_readres *resp = rqstp->rq_resp;
+
p = encode_fattr(rqstp, p, &resp->fh, &resp->stat);
*p++ = htonl(resp->count);
xdr_ressize_check(rqstp, p);
@@ -469,9 +484,10 @@
}
int
-nfssvc_encode_readdirres(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd_readdirres *resp)
+nfssvc_encode_readdirres(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd_readdirres *resp = rqstp->rq_resp;
+
xdr_ressize_check(rqstp, p);
p = resp->buffer;
*p++ = 0; /* no more entries */
@@ -482,9 +498,9 @@
}
int
-nfssvc_encode_statfsres(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd_statfsres *resp)
+nfssvc_encode_statfsres(struct svc_rqst *rqstp, __be32 *p)
{
+ struct nfsd_statfsres *resp = rqstp->rq_resp;
struct kstatfs *stat = &resp->stats;
*p++ = htonl(NFSSVC_MAXBLKSIZE_V2); /* max transfer size */
@@ -543,10 +559,10 @@
/*
* XDR release functions
*/
-int
-nfssvc_release_fhandle(struct svc_rqst *rqstp, __be32 *p,
- struct nfsd_fhandle *resp)
+void
+nfssvc_release_fhandle(struct svc_rqst *rqstp)
{
+ struct nfsd_fhandle *resp = rqstp->rq_resp;
+
fh_put(&resp->fh);
- return 1;
}
diff --git a/fs/nfsd/xdr.h b/fs/nfsd/xdr.h
index 4f0481d6..457ce45 100644
--- a/fs/nfsd/xdr.h
+++ b/fs/nfsd/xdr.h
@@ -131,40 +131,30 @@
#define NFS2_SVC_XDRSIZE sizeof(union nfsd_xdrstore)
-int nfssvc_decode_void(struct svc_rqst *, __be32 *, void *);
-int nfssvc_decode_fhandle(struct svc_rqst *, __be32 *, struct nfsd_fhandle *);
-int nfssvc_decode_sattrargs(struct svc_rqst *, __be32 *,
- struct nfsd_sattrargs *);
-int nfssvc_decode_diropargs(struct svc_rqst *, __be32 *,
- struct nfsd_diropargs *);
-int nfssvc_decode_readargs(struct svc_rqst *, __be32 *,
- struct nfsd_readargs *);
-int nfssvc_decode_writeargs(struct svc_rqst *, __be32 *,
- struct nfsd_writeargs *);
-int nfssvc_decode_createargs(struct svc_rqst *, __be32 *,
- struct nfsd_createargs *);
-int nfssvc_decode_renameargs(struct svc_rqst *, __be32 *,
- struct nfsd_renameargs *);
-int nfssvc_decode_readlinkargs(struct svc_rqst *, __be32 *,
- struct nfsd_readlinkargs *);
-int nfssvc_decode_linkargs(struct svc_rqst *, __be32 *,
- struct nfsd_linkargs *);
-int nfssvc_decode_symlinkargs(struct svc_rqst *, __be32 *,
- struct nfsd_symlinkargs *);
-int nfssvc_decode_readdirargs(struct svc_rqst *, __be32 *,
- struct nfsd_readdirargs *);
-int nfssvc_encode_void(struct svc_rqst *, __be32 *, void *);
-int nfssvc_encode_attrstat(struct svc_rqst *, __be32 *, struct nfsd_attrstat *);
-int nfssvc_encode_diropres(struct svc_rqst *, __be32 *, struct nfsd_diropres *);
-int nfssvc_encode_readlinkres(struct svc_rqst *, __be32 *, struct nfsd_readlinkres *);
-int nfssvc_encode_readres(struct svc_rqst *, __be32 *, struct nfsd_readres *);
-int nfssvc_encode_statfsres(struct svc_rqst *, __be32 *, struct nfsd_statfsres *);
-int nfssvc_encode_readdirres(struct svc_rqst *, __be32 *, struct nfsd_readdirres *);
+int nfssvc_decode_void(struct svc_rqst *, __be32 *);
+int nfssvc_decode_fhandle(struct svc_rqst *, __be32 *);
+int nfssvc_decode_sattrargs(struct svc_rqst *, __be32 *);
+int nfssvc_decode_diropargs(struct svc_rqst *, __be32 *);
+int nfssvc_decode_readargs(struct svc_rqst *, __be32 *);
+int nfssvc_decode_writeargs(struct svc_rqst *, __be32 *);
+int nfssvc_decode_createargs(struct svc_rqst *, __be32 *);
+int nfssvc_decode_renameargs(struct svc_rqst *, __be32 *);
+int nfssvc_decode_readlinkargs(struct svc_rqst *, __be32 *);
+int nfssvc_decode_linkargs(struct svc_rqst *, __be32 *);
+int nfssvc_decode_symlinkargs(struct svc_rqst *, __be32 *);
+int nfssvc_decode_readdirargs(struct svc_rqst *, __be32 *);
+int nfssvc_encode_void(struct svc_rqst *, __be32 *);
+int nfssvc_encode_attrstat(struct svc_rqst *, __be32 *);
+int nfssvc_encode_diropres(struct svc_rqst *, __be32 *);
+int nfssvc_encode_readlinkres(struct svc_rqst *, __be32 *);
+int nfssvc_encode_readres(struct svc_rqst *, __be32 *);
+int nfssvc_encode_statfsres(struct svc_rqst *, __be32 *);
+int nfssvc_encode_readdirres(struct svc_rqst *, __be32 *);
int nfssvc_encode_entry(void *, const char *name,
int namlen, loff_t offset, u64 ino, unsigned int);
-int nfssvc_release_fhandle(struct svc_rqst *, __be32 *, struct nfsd_fhandle *);
+void nfssvc_release_fhandle(struct svc_rqst *);
/* Helper functions for NFSv2 ACL code */
__be32 *nfs2svc_encode_fattr(struct svc_rqst *rqstp, __be32 *p, struct svc_fh *fhp, struct kstat *stat);
diff --git a/fs/nfsd/xdr3.h b/fs/nfsd/xdr3.h
index 335e04a..80d7da6 100644
--- a/fs/nfsd/xdr3.h
+++ b/fs/nfsd/xdr3.h
@@ -269,71 +269,41 @@
#define NFS3_SVC_XDRSIZE sizeof(union nfsd3_xdrstore)
-int nfs3svc_decode_fhandle(struct svc_rqst *, __be32 *, struct nfsd_fhandle *);
-int nfs3svc_decode_sattrargs(struct svc_rqst *, __be32 *,
- struct nfsd3_sattrargs *);
-int nfs3svc_decode_diropargs(struct svc_rqst *, __be32 *,
- struct nfsd3_diropargs *);
-int nfs3svc_decode_accessargs(struct svc_rqst *, __be32 *,
- struct nfsd3_accessargs *);
-int nfs3svc_decode_readargs(struct svc_rqst *, __be32 *,
- struct nfsd3_readargs *);
-int nfs3svc_decode_writeargs(struct svc_rqst *, __be32 *,
- struct nfsd3_writeargs *);
-int nfs3svc_decode_createargs(struct svc_rqst *, __be32 *,
- struct nfsd3_createargs *);
-int nfs3svc_decode_mkdirargs(struct svc_rqst *, __be32 *,
- struct nfsd3_createargs *);
-int nfs3svc_decode_mknodargs(struct svc_rqst *, __be32 *,
- struct nfsd3_mknodargs *);
-int nfs3svc_decode_renameargs(struct svc_rqst *, __be32 *,
- struct nfsd3_renameargs *);
-int nfs3svc_decode_readlinkargs(struct svc_rqst *, __be32 *,
- struct nfsd3_readlinkargs *);
-int nfs3svc_decode_linkargs(struct svc_rqst *, __be32 *,
- struct nfsd3_linkargs *);
-int nfs3svc_decode_symlinkargs(struct svc_rqst *, __be32 *,
- struct nfsd3_symlinkargs *);
-int nfs3svc_decode_readdirargs(struct svc_rqst *, __be32 *,
- struct nfsd3_readdirargs *);
-int nfs3svc_decode_readdirplusargs(struct svc_rqst *, __be32 *,
- struct nfsd3_readdirargs *);
-int nfs3svc_decode_commitargs(struct svc_rqst *, __be32 *,
- struct nfsd3_commitargs *);
-int nfs3svc_encode_voidres(struct svc_rqst *, __be32 *, void *);
-int nfs3svc_encode_attrstat(struct svc_rqst *, __be32 *,
- struct nfsd3_attrstat *);
-int nfs3svc_encode_wccstat(struct svc_rqst *, __be32 *,
- struct nfsd3_attrstat *);
-int nfs3svc_encode_diropres(struct svc_rqst *, __be32 *,
- struct nfsd3_diropres *);
-int nfs3svc_encode_accessres(struct svc_rqst *, __be32 *,
- struct nfsd3_accessres *);
-int nfs3svc_encode_readlinkres(struct svc_rqst *, __be32 *,
- struct nfsd3_readlinkres *);
-int nfs3svc_encode_readres(struct svc_rqst *, __be32 *, struct nfsd3_readres *);
-int nfs3svc_encode_writeres(struct svc_rqst *, __be32 *, struct nfsd3_writeres *);
-int nfs3svc_encode_createres(struct svc_rqst *, __be32 *,
- struct nfsd3_diropres *);
-int nfs3svc_encode_renameres(struct svc_rqst *, __be32 *,
- struct nfsd3_renameres *);
-int nfs3svc_encode_linkres(struct svc_rqst *, __be32 *,
- struct nfsd3_linkres *);
-int nfs3svc_encode_readdirres(struct svc_rqst *, __be32 *,
- struct nfsd3_readdirres *);
-int nfs3svc_encode_fsstatres(struct svc_rqst *, __be32 *,
- struct nfsd3_fsstatres *);
-int nfs3svc_encode_fsinfores(struct svc_rqst *, __be32 *,
- struct nfsd3_fsinfores *);
-int nfs3svc_encode_pathconfres(struct svc_rqst *, __be32 *,
- struct nfsd3_pathconfres *);
-int nfs3svc_encode_commitres(struct svc_rqst *, __be32 *,
- struct nfsd3_commitres *);
+int nfs3svc_decode_fhandle(struct svc_rqst *, __be32 *);
+int nfs3svc_decode_sattrargs(struct svc_rqst *, __be32 *);
+int nfs3svc_decode_diropargs(struct svc_rqst *, __be32 *);
+int nfs3svc_decode_accessargs(struct svc_rqst *, __be32 *);
+int nfs3svc_decode_readargs(struct svc_rqst *, __be32 *);
+int nfs3svc_decode_writeargs(struct svc_rqst *, __be32 *);
+int nfs3svc_decode_createargs(struct svc_rqst *, __be32 *);
+int nfs3svc_decode_mkdirargs(struct svc_rqst *, __be32 *);
+int nfs3svc_decode_mknodargs(struct svc_rqst *, __be32 *);
+int nfs3svc_decode_renameargs(struct svc_rqst *, __be32 *);
+int nfs3svc_decode_readlinkargs(struct svc_rqst *, __be32 *);
+int nfs3svc_decode_linkargs(struct svc_rqst *, __be32 *);
+int nfs3svc_decode_symlinkargs(struct svc_rqst *, __be32 *);
+int nfs3svc_decode_readdirargs(struct svc_rqst *, __be32 *);
+int nfs3svc_decode_readdirplusargs(struct svc_rqst *, __be32 *);
+int nfs3svc_decode_commitargs(struct svc_rqst *, __be32 *);
+int nfs3svc_encode_voidres(struct svc_rqst *, __be32 *);
+int nfs3svc_encode_attrstat(struct svc_rqst *, __be32 *);
+int nfs3svc_encode_wccstat(struct svc_rqst *, __be32 *);
+int nfs3svc_encode_diropres(struct svc_rqst *, __be32 *);
+int nfs3svc_encode_accessres(struct svc_rqst *, __be32 *);
+int nfs3svc_encode_readlinkres(struct svc_rqst *, __be32 *);
+int nfs3svc_encode_readres(struct svc_rqst *, __be32 *);
+int nfs3svc_encode_writeres(struct svc_rqst *, __be32 *);
+int nfs3svc_encode_createres(struct svc_rqst *, __be32 *);
+int nfs3svc_encode_renameres(struct svc_rqst *, __be32 *);
+int nfs3svc_encode_linkres(struct svc_rqst *, __be32 *);
+int nfs3svc_encode_readdirres(struct svc_rqst *, __be32 *);
+int nfs3svc_encode_fsstatres(struct svc_rqst *, __be32 *);
+int nfs3svc_encode_fsinfores(struct svc_rqst *, __be32 *);
+int nfs3svc_encode_pathconfres(struct svc_rqst *, __be32 *);
+int nfs3svc_encode_commitres(struct svc_rqst *, __be32 *);
-int nfs3svc_release_fhandle(struct svc_rqst *, __be32 *,
- struct nfsd3_attrstat *);
-int nfs3svc_release_fhandle2(struct svc_rqst *, __be32 *,
- struct nfsd3_fhandle_pair *);
+void nfs3svc_release_fhandle(struct svc_rqst *);
+void nfs3svc_release_fhandle2(struct svc_rqst *);
int nfs3svc_encode_entry(void *, const char *name,
int namlen, loff_t offset, u64 ino,
unsigned int);
diff --git a/fs/nfsd/xdr4.h b/fs/nfsd/xdr4.h
index 8fda4ab..72c6ad1 100644
--- a/fs/nfsd/xdr4.h
+++ b/fs/nfsd/xdr4.h
@@ -539,7 +539,7 @@
struct nfsd4_op {
int opnum;
__be32 status;
- union {
+ union nfsd4_op_u {
struct nfsd4_access access;
struct nfsd4_close close;
struct nfsd4_commit commit;
@@ -577,6 +577,7 @@
struct nfsd4_bind_conn_to_session bind_conn_to_session;
struct nfsd4_create_session create_session;
struct nfsd4_destroy_session destroy_session;
+ struct nfsd4_destroy_clientid destroy_clientid;
struct nfsd4_sequence sequence;
struct nfsd4_reclaim_complete reclaim_complete;
struct nfsd4_test_stateid test_stateid;
@@ -585,6 +586,7 @@
struct nfsd4_layoutget layoutget;
struct nfsd4_layoutcommit layoutcommit;
struct nfsd4_layoutreturn layoutreturn;
+ struct nfsd4_secinfo_no_name secinfo_no_name;
/* NFSv4.2 */
struct nfsd4_fallocate allocate;
@@ -682,11 +684,9 @@
bool nfsd4_mach_creds_match(struct nfs4_client *cl, struct svc_rqst *rqstp);
-int nfs4svc_encode_voidres(struct svc_rqst *, __be32 *, void *);
-int nfs4svc_decode_compoundargs(struct svc_rqst *, __be32 *,
- struct nfsd4_compoundargs *);
-int nfs4svc_encode_compoundres(struct svc_rqst *, __be32 *,
- struct nfsd4_compoundres *);
+int nfs4svc_encode_voidres(struct svc_rqst *, __be32 *);
+int nfs4svc_decode_compoundargs(struct svc_rqst *, __be32 *);
+int nfs4svc_encode_compoundres(struct svc_rqst *, __be32 *);
__be32 nfsd4_check_resp_size(struct nfsd4_compoundres *, u32);
void nfsd4_encode_operation(struct nfsd4_compoundres *, struct nfsd4_op *);
void nfsd4_encode_replay(struct xdr_stream *xdr, struct nfsd4_op *op);
@@ -695,27 +695,26 @@
struct dentry *dentry,
u32 *bmval, struct svc_rqst *, int ignore_crossmnt);
extern __be32 nfsd4_setclientid(struct svc_rqst *rqstp,
- struct nfsd4_compound_state *,
- struct nfsd4_setclientid *setclid);
+ struct nfsd4_compound_state *, union nfsd4_op_u *u);
extern __be32 nfsd4_setclientid_confirm(struct svc_rqst *rqstp,
- struct nfsd4_compound_state *,
- struct nfsd4_setclientid_confirm *setclientid_confirm);
+ struct nfsd4_compound_state *, union nfsd4_op_u *u);
extern __be32 nfsd4_exchange_id(struct svc_rqst *rqstp,
- struct nfsd4_compound_state *, struct nfsd4_exchange_id *);
-extern __be32 nfsd4_backchannel_ctl(struct svc_rqst *, struct nfsd4_compound_state *, struct nfsd4_backchannel_ctl *);
-extern __be32 nfsd4_bind_conn_to_session(struct svc_rqst *, struct nfsd4_compound_state *, struct nfsd4_bind_conn_to_session *);
+ struct nfsd4_compound_state *, union nfsd4_op_u *u);
+extern __be32 nfsd4_backchannel_ctl(struct svc_rqst *,
+ struct nfsd4_compound_state *, union nfsd4_op_u *u);
+extern __be32 nfsd4_bind_conn_to_session(struct svc_rqst *,
+ struct nfsd4_compound_state *, union nfsd4_op_u *u);
extern __be32 nfsd4_create_session(struct svc_rqst *,
- struct nfsd4_compound_state *,
- struct nfsd4_create_session *);
+ struct nfsd4_compound_state *, union nfsd4_op_u *u);
extern __be32 nfsd4_sequence(struct svc_rqst *,
- struct nfsd4_compound_state *,
- struct nfsd4_sequence *);
+ struct nfsd4_compound_state *, union nfsd4_op_u *u);
extern void nfsd4_sequence_done(struct nfsd4_compoundres *resp);
extern __be32 nfsd4_destroy_session(struct svc_rqst *,
- struct nfsd4_compound_state *,
- struct nfsd4_destroy_session *);
-extern __be32 nfsd4_destroy_clientid(struct svc_rqst *, struct nfsd4_compound_state *, struct nfsd4_destroy_clientid *);
-__be32 nfsd4_reclaim_complete(struct svc_rqst *, struct nfsd4_compound_state *, struct nfsd4_reclaim_complete *);
+ struct nfsd4_compound_state *, union nfsd4_op_u *u);
+extern __be32 nfsd4_destroy_clientid(struct svc_rqst *, struct nfsd4_compound_state *,
+ union nfsd4_op_u *u);
+__be32 nfsd4_reclaim_complete(struct svc_rqst *, struct nfsd4_compound_state *,
+ union nfsd4_op_u *u);
extern __be32 nfsd4_process_open1(struct nfsd4_compound_state *,
struct nfsd4_open *open, struct nfsd_net *nn);
extern __be32 nfsd4_process_open2(struct svc_rqst *rqstp,
@@ -724,34 +723,29 @@
extern void nfsd4_cleanup_open_state(struct nfsd4_compound_state *cstate,
struct nfsd4_open *open);
extern __be32 nfsd4_open_confirm(struct svc_rqst *rqstp,
- struct nfsd4_compound_state *, struct nfsd4_open_confirm *oc);
-extern __be32 nfsd4_close(struct svc_rqst *rqstp,
- struct nfsd4_compound_state *,
- struct nfsd4_close *close);
+ struct nfsd4_compound_state *, union nfsd4_op_u *u);
+extern __be32 nfsd4_close(struct svc_rqst *rqstp, struct nfsd4_compound_state *,
+ union nfsd4_op_u *u);
extern __be32 nfsd4_open_downgrade(struct svc_rqst *rqstp,
- struct nfsd4_compound_state *,
- struct nfsd4_open_downgrade *od);
+ struct nfsd4_compound_state *, union nfsd4_op_u *u);
extern __be32 nfsd4_lock(struct svc_rqst *rqstp, struct nfsd4_compound_state *,
- struct nfsd4_lock *lock);
-extern __be32 nfsd4_lockt(struct svc_rqst *rqstp,
- struct nfsd4_compound_state *,
- struct nfsd4_lockt *lockt);
-extern __be32 nfsd4_locku(struct svc_rqst *rqstp,
- struct nfsd4_compound_state *,
- struct nfsd4_locku *locku);
+ union nfsd4_op_u *u);
+extern __be32 nfsd4_lockt(struct svc_rqst *rqstp, struct nfsd4_compound_state *,
+ union nfsd4_op_u *u);
+extern __be32 nfsd4_locku(struct svc_rqst *rqstp, struct nfsd4_compound_state *,
+ union nfsd4_op_u *u);
extern __be32
nfsd4_release_lockowner(struct svc_rqst *rqstp,
- struct nfsd4_compound_state *,
- struct nfsd4_release_lockowner *rlockowner);
-extern int nfsd4_release_compoundargs(void *rq, __be32 *p, void *resp);
+ struct nfsd4_compound_state *, union nfsd4_op_u *u);
+extern void nfsd4_release_compoundargs(struct svc_rqst *rqstp);
extern __be32 nfsd4_delegreturn(struct svc_rqst *rqstp,
- struct nfsd4_compound_state *, struct nfsd4_delegreturn *dr);
-extern __be32 nfsd4_renew(struct svc_rqst *rqstp,
- struct nfsd4_compound_state *, clientid_t *clid);
+ struct nfsd4_compound_state *, union nfsd4_op_u *u);
+extern __be32 nfsd4_renew(struct svc_rqst *rqstp, struct nfsd4_compound_state *,
+ union nfsd4_op_u *u);
extern __be32 nfsd4_test_stateid(struct svc_rqst *rqstp,
- struct nfsd4_compound_state *, struct nfsd4_test_stateid *test_stateid);
+ struct nfsd4_compound_state *, union nfsd4_op_u *);
extern __be32 nfsd4_free_stateid(struct svc_rqst *rqstp,
- struct nfsd4_compound_state *, struct nfsd4_free_stateid *free_stateid);
+ struct nfsd4_compound_state *, union nfsd4_op_u *);
extern void nfsd4_bump_seqid(struct nfsd4_compound_state *, __be32 nfserr);
#endif
diff --git a/fs/nsfs.c b/fs/nsfs.c
index f3db56e..08127a2 100644
--- a/fs/nsfs.c
+++ b/fs/nsfs.c
@@ -53,7 +53,6 @@
static void *__ns_get_path(struct path *path, struct ns_common *ns)
{
struct vfsmount *mnt = nsfs_mnt;
- struct qstr qname = { .name = "", };
struct dentry *dentry;
struct inode *inode;
unsigned long d;
@@ -85,7 +84,7 @@
inode->i_fop = &ns_file_operations;
inode->i_private = ns;
- dentry = d_alloc_pseudo(mnt->mnt_sb, &qname);
+ dentry = d_alloc_pseudo(mnt->mnt_sb, &empty_name);
if (!dentry) {
iput(inode);
return ERR_PTR(-ENOMEM);
diff --git a/fs/ocfs2/acl.c b/fs/ocfs2/acl.c
index dc22ba8..e50a387 100644
--- a/fs/ocfs2/acl.c
+++ b/fs/ocfs2/acl.c
@@ -240,18 +240,6 @@
switch (type) {
case ACL_TYPE_ACCESS:
name_index = OCFS2_XATTR_INDEX_POSIX_ACL_ACCESS;
- if (acl) {
- umode_t mode;
-
- ret = posix_acl_update_mode(inode, &mode, &acl);
- if (ret)
- return ret;
-
- ret = ocfs2_acl_set_mode(inode, di_bh,
- handle, mode);
- if (ret)
- return ret;
- }
break;
case ACL_TYPE_DEFAULT:
name_index = OCFS2_XATTR_INDEX_POSIX_ACL_DEFAULT;
@@ -289,7 +277,19 @@
had_lock = ocfs2_inode_lock_tracker(inode, &bh, 1, &oh);
if (had_lock < 0)
return had_lock;
+ if (type == ACL_TYPE_ACCESS && acl) {
+ umode_t mode;
+
+ status = posix_acl_update_mode(inode, &mode, &acl);
+ if (status)
+ goto unlock;
+
+ status = ocfs2_acl_set_mode(inode, bh, NULL, mode);
+ if (status)
+ goto unlock;
+ }
status = ocfs2_set_acl(NULL, inode, bh, type, acl, NULL, NULL);
+unlock:
ocfs2_inode_unlock_tracker(inode, 1, &oh, had_lock);
brelse(bh);
return status;
diff --git a/fs/omfs/inode.c b/fs/omfs/inode.c
index 8c9034e..ee14af9 100644
--- a/fs/omfs/inode.c
+++ b/fs/omfs/inode.c
@@ -13,6 +13,7 @@
#include <linux/buffer_head.h>
#include <linux/vmalloc.h>
#include <linux/writeback.h>
+#include <linux/seq_file.h>
#include <linux/crc-itu-t.h>
#include "omfs.h"
@@ -290,12 +291,40 @@
return 0;
}
+/*
+ * Display the mount options in /proc/mounts.
+ */
+static int omfs_show_options(struct seq_file *m, struct dentry *root)
+{
+ struct omfs_sb_info *sbi = OMFS_SB(root->d_sb);
+ umode_t cur_umask = current_umask();
+
+ if (!uid_eq(sbi->s_uid, current_uid()))
+ seq_printf(m, ",uid=%u",
+ from_kuid_munged(&init_user_ns, sbi->s_uid));
+ if (!gid_eq(sbi->s_gid, current_gid()))
+ seq_printf(m, ",gid=%u",
+ from_kgid_munged(&init_user_ns, sbi->s_gid));
+
+ if (sbi->s_dmask == sbi->s_fmask) {
+ if (sbi->s_fmask != cur_umask)
+ seq_printf(m, ",umask=%o", sbi->s_fmask);
+ } else {
+ if (sbi->s_dmask != cur_umask)
+ seq_printf(m, ",dmask=%o", sbi->s_dmask);
+ if (sbi->s_fmask != cur_umask)
+ seq_printf(m, ",fmask=%o", sbi->s_fmask);
+ }
+
+ return 0;
+}
+
static const struct super_operations omfs_sops = {
.write_inode = omfs_write_inode,
.evict_inode = omfs_evict_inode,
.put_super = omfs_put_super,
.statfs = omfs_statfs,
- .show_options = generic_show_options,
+ .show_options = omfs_show_options,
};
/*
@@ -434,8 +463,6 @@
struct inode *root;
int ret = -EINVAL;
- save_mount_options(sb, (char *) data);
-
sbi = kzalloc(sizeof(struct omfs_sb_info), GFP_KERNEL);
if (!sbi)
return -ENOMEM;
diff --git a/fs/orangefs/super.c b/fs/orangefs/super.c
index 5c7c273..5a1bed6 100644
--- a/fs/orangefs/super.c
+++ b/fs/orangefs/super.c
@@ -35,6 +35,19 @@
uint64_t orangefs_features;
+static int orangefs_show_options(struct seq_file *m, struct dentry *root)
+{
+ struct orangefs_sb_info_s *orangefs_sb = ORANGEFS_SB(root->d_sb);
+
+ if (root->d_sb->s_flags & MS_POSIXACL)
+ seq_puts(m, ",acl");
+ if (orangefs_sb->flags & ORANGEFS_OPT_INTR)
+ seq_puts(m, ",intr");
+ if (orangefs_sb->flags & ORANGEFS_OPT_LOCAL_LOCK)
+ seq_puts(m, ",local_lock");
+ return 0;
+}
+
static int parse_mount_options(struct super_block *sb, char *options,
int silent)
{
@@ -305,7 +318,7 @@
.drop_inode = generic_delete_inode,
.statfs = orangefs_statfs,
.remount_fs = orangefs_remount_fs,
- .show_options = generic_show_options,
+ .show_options = orangefs_show_options,
};
static struct dentry *orangefs_fh_to_dentry(struct super_block *sb,
diff --git a/fs/overlayfs/Kconfig b/fs/overlayfs/Kconfig
index c0c9683..cbfc196 100644
--- a/fs/overlayfs/Kconfig
+++ b/fs/overlayfs/Kconfig
@@ -23,3 +23,23 @@
Note, that redirects are not backward compatible. That is, mounting
an overlay which has redirects on a kernel that doesn't support this
feature will have unexpected results.
+
+config OVERLAY_FS_INDEX
+ bool "Overlayfs: turn on inodes index feature by default"
+ depends on OVERLAY_FS
+ help
+ If this config option is enabled then overlay filesystems will use
+ the inodes index dir to map lower inodes to upper inodes by default.
+ In this case it is still possible to turn off index globally with the
+ "index=off" module option or on a filesystem instance basis with the
+ "index=off" mount option.
+
+ The inodes index feature prevents breaking of lower hardlinks on copy
+ up.
+
+ Note, that the inodes index feature is read-only backward compatible.
+ That is, mounting an overlay which has an index dir on a kernel that
+ doesn't support this feature read-only, will not have any negative
+ outcomes. However, mounting the same overlay with an old kernel
+ read-write and then mounting it again with a new kernel, will have
+ unexpected results.
diff --git a/fs/overlayfs/copy_up.c b/fs/overlayfs/copy_up.c
index e5869f9..acb6f97 100644
--- a/fs/overlayfs/copy_up.c
+++ b/fs/overlayfs/copy_up.c
@@ -233,12 +233,13 @@
return err;
}
-static struct ovl_fh *ovl_encode_fh(struct dentry *lower, uuid_t *uuid)
+struct ovl_fh *ovl_encode_fh(struct dentry *lower, bool is_upper)
{
struct ovl_fh *fh;
int fh_type, fh_len, dwords;
void *buf;
int buflen = MAX_HANDLE_SZ;
+ uuid_t *uuid = &lower->d_sb->s_uuid;
buf = kmalloc(buflen, GFP_TEMPORARY);
if (!buf)
@@ -271,6 +272,14 @@
fh->magic = OVL_FH_MAGIC;
fh->type = fh_type;
fh->flags = OVL_FH_FLAG_CPU_ENDIAN;
+ /*
+ * When we will want to decode an overlay dentry from this handle
+ * and all layers are on the same fs, if we get a disconncted real
+ * dentry when we decode fid, the only way to tell if we should assign
+ * it to upperdentry or to lowerstack is by checking this flag.
+ */
+ if (is_upper)
+ fh->flags |= OVL_FH_FLAG_PATH_UPPER;
fh->len = fh_len;
fh->uuid = *uuid;
memcpy(fh->fid, buf, buflen);
@@ -283,7 +292,6 @@
static int ovl_set_origin(struct dentry *dentry, struct dentry *lower,
struct dentry *upper)
{
- struct super_block *sb = lower->d_sb;
const struct ovl_fh *fh = NULL;
int err;
@@ -292,9 +300,8 @@
* so we can use the overlay.origin xattr to distignuish between a copy
* up and a pure upper inode.
*/
- if (sb->s_export_op && sb->s_export_op->fh_to_dentry &&
- !uuid_is_null(&sb->s_uuid)) {
- fh = ovl_encode_fh(lower, &sb->s_uuid);
+ if (ovl_can_decode_fh(lower->d_sb)) {
+ fh = ovl_encode_fh(lower, false);
if (IS_ERR(fh))
return PTR_ERR(fh);
}
@@ -309,84 +316,156 @@
return err;
}
-static int ovl_copy_up_locked(struct dentry *workdir, struct dentry *upperdir,
- struct dentry *dentry, struct path *lowerpath,
- struct kstat *stat, const char *link,
- struct kstat *pstat, bool tmpfile)
+struct ovl_copy_up_ctx {
+ struct dentry *parent;
+ struct dentry *dentry;
+ struct path lowerpath;
+ struct kstat stat;
+ struct kstat pstat;
+ const char *link;
+ struct dentry *destdir;
+ struct qstr destname;
+ struct dentry *workdir;
+ bool tmpfile;
+ bool origin;
+};
+
+static int ovl_link_up(struct ovl_copy_up_ctx *c)
{
- struct inode *wdir = workdir->d_inode;
- struct inode *udir = upperdir->d_inode;
- struct dentry *newdentry = NULL;
- struct dentry *upper = NULL;
- struct dentry *temp = NULL;
int err;
+ struct dentry *upper;
+ struct dentry *upperdir = ovl_dentry_upper(c->parent);
+ struct inode *udir = d_inode(upperdir);
+
+ /* Mark parent "impure" because it may now contain non-pure upper */
+ err = ovl_set_impure(c->parent, upperdir);
+ if (err)
+ return err;
+
+ err = ovl_set_nlink_lower(c->dentry);
+ if (err)
+ return err;
+
+ inode_lock_nested(udir, I_MUTEX_PARENT);
+ upper = lookup_one_len(c->dentry->d_name.name, upperdir,
+ c->dentry->d_name.len);
+ err = PTR_ERR(upper);
+ if (!IS_ERR(upper)) {
+ err = ovl_do_link(ovl_dentry_upper(c->dentry), udir, upper,
+ true);
+ dput(upper);
+
+ if (!err) {
+ /* Restore timestamps on parent (best effort) */
+ ovl_set_timestamps(upperdir, &c->pstat);
+ ovl_dentry_set_upper_alias(c->dentry);
+ }
+ }
+ inode_unlock(udir);
+ ovl_set_nlink_upper(c->dentry);
+
+ return err;
+}
+
+static int ovl_install_temp(struct ovl_copy_up_ctx *c, struct dentry *temp,
+ struct dentry **newdentry)
+{
+ int err;
+ struct dentry *upper;
+ struct inode *udir = d_inode(c->destdir);
+
+ upper = lookup_one_len(c->destname.name, c->destdir, c->destname.len);
+ if (IS_ERR(upper))
+ return PTR_ERR(upper);
+
+ if (c->tmpfile)
+ err = ovl_do_link(temp, udir, upper, true);
+ else
+ err = ovl_do_rename(d_inode(c->workdir), temp, udir, upper, 0);
+
+ if (!err)
+ *newdentry = dget(c->tmpfile ? upper : temp);
+ dput(upper);
+
+ return err;
+}
+
+static int ovl_get_tmpfile(struct ovl_copy_up_ctx *c, struct dentry **tempp)
+{
+ int err;
+ struct dentry *temp;
const struct cred *old_creds = NULL;
struct cred *new_creds = NULL;
struct cattr cattr = {
/* Can't properly set mode on creation because of the umask */
- .mode = stat->mode & S_IFMT,
- .rdev = stat->rdev,
- .link = link
+ .mode = c->stat.mode & S_IFMT,
+ .rdev = c->stat.rdev,
+ .link = c->link
};
- err = security_inode_copy_up(dentry, &new_creds);
+ err = security_inode_copy_up(c->dentry, &new_creds);
if (err < 0)
goto out;
if (new_creds)
old_creds = override_creds(new_creds);
- if (tmpfile)
- temp = ovl_do_tmpfile(upperdir, stat->mode);
- else
- temp = ovl_lookup_temp(workdir);
- err = 0;
- if (IS_ERR(temp)) {
- err = PTR_ERR(temp);
- temp = NULL;
+ if (c->tmpfile) {
+ temp = ovl_do_tmpfile(c->workdir, c->stat.mode);
+ if (IS_ERR(temp))
+ goto temp_err;
+ } else {
+ temp = ovl_lookup_temp(c->workdir);
+ if (IS_ERR(temp))
+ goto temp_err;
+
+ err = ovl_create_real(d_inode(c->workdir), temp, &cattr,
+ NULL, true);
+ if (err) {
+ dput(temp);
+ goto out;
+ }
}
-
- if (!err && !tmpfile)
- err = ovl_create_real(wdir, temp, &cattr, NULL, true);
-
+ err = 0;
+ *tempp = temp;
+out:
if (new_creds) {
revert_creds(old_creds);
put_cred(new_creds);
}
- if (err)
- goto out;
+ return err;
- if (S_ISREG(stat->mode)) {
+temp_err:
+ err = PTR_ERR(temp);
+ goto out;
+}
+
+static int ovl_copy_up_inode(struct ovl_copy_up_ctx *c, struct dentry *temp)
+{
+ int err;
+
+ if (S_ISREG(c->stat.mode)) {
struct path upperpath;
- ovl_path_upper(dentry, &upperpath);
+ ovl_path_upper(c->dentry, &upperpath);
BUG_ON(upperpath.dentry != NULL);
upperpath.dentry = temp;
- if (tmpfile) {
- inode_unlock(udir);
- err = ovl_copy_up_data(lowerpath, &upperpath,
- stat->size);
- inode_lock_nested(udir, I_MUTEX_PARENT);
- } else {
- err = ovl_copy_up_data(lowerpath, &upperpath,
- stat->size);
- }
-
+ err = ovl_copy_up_data(&c->lowerpath, &upperpath, c->stat.size);
if (err)
- goto out_cleanup;
+ return err;
}
- err = ovl_copy_xattr(lowerpath->dentry, temp);
+ err = ovl_copy_xattr(c->lowerpath.dentry, temp);
if (err)
- goto out_cleanup;
+ return err;
inode_lock(temp->d_inode);
- err = ovl_set_attr(temp, stat);
+ err = ovl_set_attr(temp, &c->stat);
inode_unlock(temp->d_inode);
if (err)
- goto out_cleanup;
+ return err;
/*
* Store identifier of lower inode in upper inode xattr to
@@ -395,41 +474,48 @@
* Don't set origin when we are breaking the association with a lower
* hard link.
*/
- if (S_ISDIR(stat->mode) || stat->nlink == 1) {
- err = ovl_set_origin(dentry, lowerpath->dentry, temp);
+ if (c->origin) {
+ err = ovl_set_origin(c->dentry, c->lowerpath.dentry, temp);
if (err)
- goto out_cleanup;
+ return err;
}
- upper = lookup_one_len(dentry->d_name.name, upperdir,
- dentry->d_name.len);
- if (IS_ERR(upper)) {
- err = PTR_ERR(upper);
- upper = NULL;
- goto out_cleanup;
- }
+ return 0;
+}
- if (tmpfile)
- err = ovl_do_link(temp, udir, upper, true);
- else
- err = ovl_do_rename(wdir, temp, udir, upper, 0);
+static int ovl_copy_up_locked(struct ovl_copy_up_ctx *c)
+{
+ struct inode *udir = c->destdir->d_inode;
+ struct dentry *newdentry = NULL;
+ struct dentry *temp = NULL;
+ int err;
+
+ err = ovl_get_tmpfile(c, &temp);
+ if (err)
+ goto out;
+
+ err = ovl_copy_up_inode(c, temp);
if (err)
goto out_cleanup;
- newdentry = dget(tmpfile ? upper : temp);
- ovl_dentry_update(dentry, newdentry);
- ovl_inode_update(d_inode(dentry), d_inode(newdentry));
+ if (c->tmpfile) {
+ inode_lock_nested(udir, I_MUTEX_PARENT);
+ err = ovl_install_temp(c, temp, &newdentry);
+ inode_unlock(udir);
+ } else {
+ err = ovl_install_temp(c, temp, &newdentry);
+ }
+ if (err)
+ goto out_cleanup;
- /* Restore timestamps on parent (best effort) */
- ovl_set_timestamps(upperdir, pstat);
+ ovl_inode_update(d_inode(c->dentry), newdentry);
out:
dput(temp);
- dput(upper);
return err;
out_cleanup:
- if (!tmpfile)
- ovl_cleanup(wdir, temp);
+ if (!c->tmpfile)
+ ovl_cleanup(d_inode(c->workdir), temp);
goto out;
}
@@ -442,78 +528,119 @@
* is possible that the copy up will lock the old parent. At that point
* the file will have already been copied up anyway.
*/
-static int ovl_copy_up_one(struct dentry *parent, struct dentry *dentry,
- struct path *lowerpath, struct kstat *stat)
+static int ovl_do_copy_up(struct ovl_copy_up_ctx *c)
{
- DEFINE_DELAYED_CALL(done);
- struct dentry *workdir = ovl_workdir(dentry);
int err;
- struct kstat pstat;
- struct path parentpath;
- struct dentry *lowerdentry = lowerpath->dentry;
- struct dentry *upperdir;
- const char *link = NULL;
- struct ovl_fs *ofs = dentry->d_sb->s_fs_info;
+ struct ovl_fs *ofs = c->dentry->d_sb->s_fs_info;
+ bool indexed = false;
- if (WARN_ON(!workdir))
+ if (ovl_indexdir(c->dentry->d_sb) && !S_ISDIR(c->stat.mode) &&
+ c->stat.nlink > 1)
+ indexed = true;
+
+ if (S_ISDIR(c->stat.mode) || c->stat.nlink == 1 || indexed)
+ c->origin = true;
+
+ if (indexed) {
+ c->destdir = ovl_indexdir(c->dentry->d_sb);
+ err = ovl_get_index_name(c->lowerpath.dentry, &c->destname);
+ if (err)
+ return err;
+ } else {
+ /*
+ * Mark parent "impure" because it may now contain non-pure
+ * upper
+ */
+ err = ovl_set_impure(c->parent, c->destdir);
+ if (err)
+ return err;
+ }
+
+ /* Should we copyup with O_TMPFILE or with workdir? */
+ if (S_ISREG(c->stat.mode) && ofs->tmpfile) {
+ c->tmpfile = true;
+ err = ovl_copy_up_locked(c);
+ } else {
+ err = -EIO;
+ if (lock_rename(c->workdir, c->destdir) != NULL) {
+ pr_err("overlayfs: failed to lock workdir+upperdir\n");
+ } else {
+ err = ovl_copy_up_locked(c);
+ unlock_rename(c->workdir, c->destdir);
+ }
+ }
+
+ if (indexed) {
+ if (!err)
+ ovl_set_flag(OVL_INDEX, d_inode(c->dentry));
+ kfree(c->destname.name);
+ } else if (!err) {
+ struct inode *udir = d_inode(c->destdir);
+
+ /* Restore timestamps on parent (best effort) */
+ inode_lock(udir);
+ ovl_set_timestamps(c->destdir, &c->pstat);
+ inode_unlock(udir);
+
+ ovl_dentry_set_upper_alias(c->dentry);
+ }
+
+ return err;
+}
+
+static int ovl_copy_up_one(struct dentry *parent, struct dentry *dentry,
+ int flags)
+{
+ int err;
+ DEFINE_DELAYED_CALL(done);
+ struct path parentpath;
+ struct ovl_copy_up_ctx ctx = {
+ .parent = parent,
+ .dentry = dentry,
+ .workdir = ovl_workdir(dentry),
+ };
+
+ if (WARN_ON(!ctx.workdir))
return -EROFS;
- ovl_do_check_copy_up(lowerdentry);
-
- ovl_path_upper(parent, &parentpath);
- upperdir = parentpath.dentry;
-
- /* Mark parent "impure" because it may now contain non-pure upper */
- err = ovl_set_impure(parent, upperdir);
+ ovl_path_lower(dentry, &ctx.lowerpath);
+ err = vfs_getattr(&ctx.lowerpath, &ctx.stat,
+ STATX_BASIC_STATS, AT_STATX_SYNC_AS_STAT);
if (err)
return err;
- err = vfs_getattr(&parentpath, &pstat,
+ ovl_path_upper(parent, &parentpath);
+ ctx.destdir = parentpath.dentry;
+ ctx.destname = dentry->d_name;
+
+ err = vfs_getattr(&parentpath, &ctx.pstat,
STATX_ATIME | STATX_MTIME, AT_STATX_SYNC_AS_STAT);
if (err)
return err;
- if (S_ISLNK(stat->mode)) {
- link = vfs_get_link(lowerdentry, &done);
- if (IS_ERR(link))
- return PTR_ERR(link);
+ /* maybe truncate regular file. this has no effect on dirs */
+ if (flags & O_TRUNC)
+ ctx.stat.size = 0;
+
+ if (S_ISLNK(ctx.stat.mode)) {
+ ctx.link = vfs_get_link(ctx.lowerpath.dentry, &done);
+ if (IS_ERR(ctx.link))
+ return PTR_ERR(ctx.link);
}
+ ovl_do_check_copy_up(ctx.lowerpath.dentry);
- /* Should we copyup with O_TMPFILE or with workdir? */
- if (S_ISREG(stat->mode) && ofs->tmpfile) {
- err = ovl_copy_up_start(dentry);
- /* err < 0: interrupted, err > 0: raced with another copy-up */
- if (unlikely(err)) {
- pr_debug("ovl_copy_up_start(%pd2) = %i\n", dentry, err);
- if (err > 0)
- err = 0;
- goto out_done;
- }
-
- inode_lock_nested(upperdir->d_inode, I_MUTEX_PARENT);
- err = ovl_copy_up_locked(workdir, upperdir, dentry, lowerpath,
- stat, link, &pstat, true);
- inode_unlock(upperdir->d_inode);
+ err = ovl_copy_up_start(dentry);
+ /* err < 0: interrupted, err > 0: raced with another copy-up */
+ if (unlikely(err)) {
+ if (err > 0)
+ err = 0;
+ } else {
+ if (!ovl_dentry_upper(dentry))
+ err = ovl_do_copy_up(&ctx);
+ if (!err && !ovl_dentry_has_upper_alias(dentry))
+ err = ovl_link_up(&ctx);
ovl_copy_up_end(dentry);
- goto out_done;
}
-
- err = -EIO;
- if (lock_rename(workdir, upperdir) != NULL) {
- pr_err("overlayfs: failed to lock workdir+upperdir\n");
- goto out_unlock;
- }
- if (ovl_dentry_upper(dentry)) {
- /* Raced with another copy-up? Nothing to do, then... */
- err = 0;
- goto out_unlock;
- }
-
- err = ovl_copy_up_locked(workdir, upperdir, dentry, lowerpath,
- stat, link, &pstat, false);
-out_unlock:
- unlock_rename(workdir, upperdir);
-out_done:
do_delayed_call(&done);
return err;
@@ -527,11 +654,22 @@
while (!err) {
struct dentry *next;
struct dentry *parent;
- struct path lowerpath;
- struct kstat stat;
- enum ovl_path_type type = ovl_path_type(dentry);
- if (OVL_TYPE_UPPER(type))
+ /*
+ * Check if copy-up has happened as well as for upper alias (in
+ * case of hard links) is there.
+ *
+ * Both checks are lockless:
+ * - false negatives: will recheck under oi->lock
+ * - false positives:
+ * + ovl_dentry_upper() uses memory barriers to ensure the
+ * upper dentry is up-to-date
+ * + ovl_dentry_has_upper_alias() relies on locking of
+ * upper parent i_rwsem to prevent reordering copy-up
+ * with rename.
+ */
+ if (ovl_dentry_upper(dentry) &&
+ ovl_dentry_has_upper_alias(dentry))
break;
next = dget(dentry);
@@ -539,22 +677,14 @@
for (;;) {
parent = dget_parent(next);
- type = ovl_path_type(parent);
- if (OVL_TYPE_UPPER(type))
+ if (ovl_dentry_upper(parent))
break;
dput(next);
next = parent;
}
- ovl_path_lower(next, &lowerpath);
- err = vfs_getattr(&lowerpath, &stat,
- STATX_BASIC_STATS, AT_STATX_SYNC_AS_STAT);
- /* maybe truncate regular file. this has no effect on dirs */
- if (flags & O_TRUNC)
- stat.size = 0;
- if (!err)
- err = ovl_copy_up_one(parent, next, &lowerpath, &stat);
+ err = ovl_copy_up_one(parent, next, flags);
dput(parent);
dput(next);
diff --git a/fs/overlayfs/dir.c b/fs/overlayfs/dir.c
index a63a716..48b70e6 100644
--- a/fs/overlayfs/dir.c
+++ b/fs/overlayfs/dir.c
@@ -24,7 +24,7 @@
MODULE_PARM_DESC(ovl_redirect_max,
"Maximum length of absolute redirect xattr value");
-void ovl_cleanup(struct inode *wdir, struct dentry *wdentry)
+int ovl_cleanup(struct inode *wdir, struct dentry *wdentry)
{
int err;
@@ -39,6 +39,8 @@
pr_err("overlayfs: cleanup of '%pd2' failed (%i)\n",
wdentry, err);
}
+
+ return err;
}
struct dentry *ovl_lookup_temp(struct dentry *workdir)
@@ -154,12 +156,13 @@
struct dentry *newdentry, bool hardlink)
{
ovl_dentry_version_inc(dentry->d_parent);
- ovl_dentry_update(dentry, newdentry);
+ ovl_dentry_set_upper_alias(dentry);
if (!hardlink) {
- ovl_inode_update(inode, d_inode(newdentry));
+ ovl_inode_update(inode, newdentry);
ovl_copyattr(newdentry->d_inode, inode);
} else {
- WARN_ON(ovl_inode_real(inode, NULL) != d_inode(newdentry));
+ WARN_ON(ovl_inode_real(inode) != d_inode(newdentry));
+ dput(newdentry);
inc_nlink(inode);
}
d_instantiate(dentry, inode);
@@ -478,17 +481,30 @@
}
static int ovl_create_or_link(struct dentry *dentry, struct inode *inode,
- struct cattr *attr, struct dentry *hardlink)
+ struct cattr *attr, struct dentry *hardlink,
+ bool origin)
{
int err;
const struct cred *old_cred;
struct cred *override_cred;
+ struct dentry *parent = dentry->d_parent;
- err = ovl_copy_up(dentry->d_parent);
+ err = ovl_copy_up(parent);
if (err)
return err;
old_cred = ovl_override_creds(dentry->d_sb);
+
+ /*
+ * When linking a file with copy up origin into a new parent, mark the
+ * new parent dir "impure".
+ */
+ if (origin) {
+ err = ovl_set_impure(parent, ovl_dentry_upper(parent));
+ if (err)
+ goto out_revert_creds;
+ }
+
err = -ENOMEM;
override_cred = prepare_creds();
if (override_cred) {
@@ -547,7 +563,7 @@
inode_init_owner(inode, dentry->d_parent->d_inode, mode);
attr.mode = inode->i_mode;
- err = ovl_create_or_link(dentry, inode, &attr, NULL);
+ err = ovl_create_or_link(dentry, inode, &attr, NULL, false);
if (err)
iput(inode);
@@ -588,6 +604,7 @@
struct dentry *new)
{
int err;
+ bool locked = false;
struct inode *inode;
err = ovl_want_write(old);
@@ -598,19 +615,30 @@
if (err)
goto out_drop_write;
+ err = ovl_nlink_start(old, &locked);
+ if (err)
+ goto out_drop_write;
+
inode = d_inode(old);
ihold(inode);
- err = ovl_create_or_link(new, inode, NULL, ovl_dentry_upper(old));
+ err = ovl_create_or_link(new, inode, NULL, ovl_dentry_upper(old),
+ ovl_type_origin(old));
if (err)
iput(inode);
+ ovl_nlink_end(old, locked);
out_drop_write:
ovl_drop_write(old);
out:
return err;
}
+static bool ovl_matches_upper(struct dentry *dentry, struct dentry *upper)
+{
+ return d_inode(ovl_dentry_upper(dentry)) == d_inode(upper);
+}
+
static int ovl_remove_and_whiteout(struct dentry *dentry, bool is_dir)
{
struct dentry *workdir = ovl_workdir(dentry);
@@ -646,7 +674,7 @@
err = -ESTALE;
if ((opaquedir && upper != opaquedir) ||
(!opaquedir && ovl_dentry_upper(dentry) &&
- upper != ovl_dentry_upper(dentry))) {
+ !ovl_matches_upper(dentry, upper))) {
goto out_dput_upper;
}
@@ -707,7 +735,7 @@
err = -ESTALE;
if ((opaquedir && upper != opaquedir) ||
- (!opaquedir && upper != ovl_dentry_upper(dentry)))
+ (!opaquedir && !ovl_matches_upper(dentry, upper)))
goto out_dput_upper;
if (is_dir)
@@ -735,8 +763,8 @@
static int ovl_do_remove(struct dentry *dentry, bool is_dir)
{
- enum ovl_path_type type;
int err;
+ bool locked = false;
const struct cred *old_cred;
err = ovl_want_write(dentry);
@@ -747,7 +775,9 @@
if (err)
goto out_drop_write;
- type = ovl_path_type(dentry);
+ err = ovl_nlink_start(dentry, &locked);
+ if (err)
+ goto out_drop_write;
old_cred = ovl_override_creds(dentry->d_sb);
if (!ovl_lower_positive(dentry))
@@ -761,6 +791,7 @@
else
drop_nlink(dentry->d_inode);
}
+ ovl_nlink_end(dentry, locked);
out_drop_write:
ovl_drop_write(dentry);
out:
@@ -883,6 +914,7 @@
unsigned int flags)
{
int err;
+ bool locked = false;
struct dentry *old_upperdir;
struct dentry *new_upperdir;
struct dentry *olddentry;
@@ -926,6 +958,10 @@
err = ovl_copy_up(new);
if (err)
goto out_drop_write;
+ } else {
+ err = ovl_nlink_start(new, &locked);
+ if (err)
+ goto out_drop_write;
}
old_cred = ovl_override_creds(old->d_sb);
@@ -985,7 +1021,7 @@
goto out_unlock;
err = -ESTALE;
- if (olddentry != ovl_dentry_upper(old))
+ if (!ovl_matches_upper(old, olddentry))
goto out_dput_old;
newdentry = lookup_one_len(new->d_name.name, new_upperdir,
@@ -998,12 +1034,12 @@
new_opaque = ovl_dentry_is_opaque(new);
err = -ESTALE;
- if (ovl_dentry_upper(new)) {
+ if (d_inode(new) && ovl_dentry_upper(new)) {
if (opaquedir) {
if (newdentry != opaquedir)
goto out_dput;
} else {
- if (newdentry != ovl_dentry_upper(new))
+ if (!ovl_matches_upper(new, newdentry))
goto out_dput;
}
} else {
@@ -1046,6 +1082,13 @@
if (cleanup_whiteout)
ovl_cleanup(old_upperdir->d_inode, newdentry);
+ if (overwrite && d_inode(new)) {
+ if (new_is_dir)
+ clear_nlink(d_inode(new));
+ else
+ drop_nlink(d_inode(new));
+ }
+
ovl_dentry_version_inc(old->d_parent);
ovl_dentry_version_inc(new->d_parent);
@@ -1057,6 +1100,7 @@
unlock_rename(new_upperdir, old_upperdir);
out_revert_creds:
revert_creds(old_cred);
+ ovl_nlink_end(new, locked);
out_drop_write:
ovl_drop_write(old);
out:
diff --git a/fs/overlayfs/inode.c b/fs/overlayfs/inode.c
index d613e2c..5bc7164 100644
--- a/fs/overlayfs/inode.c
+++ b/fs/overlayfs/inode.c
@@ -12,6 +12,7 @@
#include <linux/cred.h>
#include <linux/xattr.h>
#include <linux/posix_acl.h>
+#include <linux/ratelimit.h>
#include "overlayfs.h"
int ovl_setattr(struct dentry *dentry, struct iattr *attr)
@@ -96,11 +97,15 @@
WARN_ON_ONCE(stat->dev != lowerstat.dev);
/*
- * Lower hardlinks are broken on copy up to different
+ * Lower hardlinks may be broken on copy up to different
* upper files, so we cannot use the lower origin st_ino
* for those different files, even for the same fs case.
+ * With inodes index enabled, it is safe to use st_ino
+ * of an indexed hardlinked origin. The index validates
+ * that the upper hardlink is not broken.
*/
- if (is_dir || lowerstat.nlink == 1)
+ if (is_dir || lowerstat.nlink == 1 ||
+ ovl_test_flag(OVL_INDEX, d_inode(dentry)))
stat->ino = lowerstat.ino;
}
stat->dev = dentry->d_sb->s_dev;
@@ -126,6 +131,15 @@
if (is_dir && OVL_TYPE_MERGE(type))
stat->nlink = 1;
+ /*
+ * Return the overlay inode nlinks for indexed upper inodes.
+ * Overlay inode nlink counts the union of the upper hardlinks
+ * and non-covered lower hardlinks. It does not include the upper
+ * index hardlink.
+ */
+ if (!is_dir && ovl_test_flag(OVL_INDEX, d_inode(dentry)))
+ stat->nlink = dentry->d_inode->i_nlink;
+
out:
revert_creds(old_cred);
@@ -134,8 +148,8 @@
int ovl_permission(struct inode *inode, int mask)
{
- bool is_upper;
- struct inode *realinode = ovl_inode_real(inode, &is_upper);
+ struct inode *upperinode = ovl_inode_upper(inode);
+ struct inode *realinode = upperinode ?: ovl_inode_lower(inode);
const struct cred *old_cred;
int err;
@@ -154,7 +168,8 @@
return err;
old_cred = ovl_override_creds(inode->i_sb);
- if (!is_upper && !special_file(realinode->i_mode) && mask & MAY_WRITE) {
+ if (!upperinode &&
+ !special_file(realinode->i_mode) && mask & MAY_WRITE) {
mask &= ~(MAY_WRITE | MAY_APPEND);
/* Make sure mounter can read file for copy up later */
mask |= MAY_READ;
@@ -187,37 +202,38 @@
sizeof(OVL_XATTR_PREFIX) - 1) == 0;
}
-int ovl_xattr_set(struct dentry *dentry, const char *name, const void *value,
- size_t size, int flags)
+int ovl_xattr_set(struct dentry *dentry, struct inode *inode, const char *name,
+ const void *value, size_t size, int flags)
{
int err;
- struct path realpath;
- enum ovl_path_type type = ovl_path_real(dentry, &realpath);
+ struct dentry *upperdentry = ovl_i_dentry_upper(inode);
+ struct dentry *realdentry = upperdentry ?: ovl_dentry_lower(dentry);
const struct cred *old_cred;
err = ovl_want_write(dentry);
if (err)
goto out;
- if (!value && !OVL_TYPE_UPPER(type)) {
- err = vfs_getxattr(realpath.dentry, name, NULL, 0);
+ if (!value && !upperdentry) {
+ err = vfs_getxattr(realdentry, name, NULL, 0);
if (err < 0)
goto out_drop_write;
}
- err = ovl_copy_up(dentry);
- if (err)
- goto out_drop_write;
+ if (!upperdentry) {
+ err = ovl_copy_up(dentry);
+ if (err)
+ goto out_drop_write;
- if (!OVL_TYPE_UPPER(type))
- ovl_path_upper(dentry, &realpath);
+ realdentry = ovl_dentry_upper(dentry);
+ }
old_cred = ovl_override_creds(dentry->d_sb);
if (value)
- err = vfs_setxattr(realpath.dentry, name, value, size, flags);
+ err = vfs_setxattr(realdentry, name, value, size, flags);
else {
WARN_ON(flags != XATTR_REPLACE);
- err = vfs_removexattr(realpath.dentry, name);
+ err = vfs_removexattr(realdentry, name);
}
revert_creds(old_cred);
@@ -227,12 +243,13 @@
return err;
}
-int ovl_xattr_get(struct dentry *dentry, const char *name,
+int ovl_xattr_get(struct dentry *dentry, struct inode *inode, const char *name,
void *value, size_t size)
{
- struct dentry *realdentry = ovl_dentry_real(dentry);
ssize_t res;
const struct cred *old_cred;
+ struct dentry *realdentry =
+ ovl_i_dentry_upper(inode) ?: ovl_dentry_lower(dentry);
old_cred = ovl_override_creds(dentry->d_sb);
res = vfs_getxattr(realdentry, name, value, size);
@@ -286,7 +303,7 @@
struct posix_acl *ovl_get_acl(struct inode *inode, int type)
{
- struct inode *realinode = ovl_inode_real(inode, NULL);
+ struct inode *realinode = ovl_inode_real(inode);
const struct cred *old_cred;
struct posix_acl *acl;
@@ -300,13 +317,13 @@
return acl;
}
-static bool ovl_open_need_copy_up(int flags, enum ovl_path_type type,
- struct dentry *realdentry)
+static bool ovl_open_need_copy_up(struct dentry *dentry, int flags)
{
- if (OVL_TYPE_UPPER(type))
+ if (ovl_dentry_upper(dentry) &&
+ ovl_dentry_has_upper_alias(dentry))
return false;
- if (special_file(realdentry->d_inode->i_mode))
+ if (special_file(d_inode(dentry)->i_mode))
return false;
if (!(OPEN_FMODE(flags) & FMODE_WRITE) && !(flags & O_TRUNC))
@@ -318,11 +335,8 @@
int ovl_open_maybe_copy_up(struct dentry *dentry, unsigned int file_flags)
{
int err = 0;
- struct path realpath;
- enum ovl_path_type type;
- type = ovl_path_real(dentry, &realpath);
- if (ovl_open_need_copy_up(file_flags, type, realpath.dentry)) {
+ if (ovl_open_need_copy_up(dentry, file_flags)) {
err = ovl_want_write(dentry);
if (!err) {
err = ovl_copy_up_flags(dentry, file_flags);
@@ -440,6 +454,103 @@
}
}
+/*
+ * With inodes index enabled, an overlay inode nlink counts the union of upper
+ * hardlinks and non-covered lower hardlinks. During the lifetime of a non-pure
+ * upper inode, the following nlink modifying operations can happen:
+ *
+ * 1. Lower hardlink copy up
+ * 2. Upper hardlink created, unlinked or renamed over
+ * 3. Lower hardlink whiteout or renamed over
+ *
+ * For the first, copy up case, the union nlink does not change, whether the
+ * operation succeeds or fails, but the upper inode nlink may change.
+ * Therefore, before copy up, we store the union nlink value relative to the
+ * lower inode nlink in the index inode xattr trusted.overlay.nlink.
+ *
+ * For the second, upper hardlink case, the union nlink should be incremented
+ * or decremented IFF the operation succeeds, aligned with nlink change of the
+ * upper inode. Therefore, before link/unlink/rename, we store the union nlink
+ * value relative to the upper inode nlink in the index inode.
+ *
+ * For the last, lower cover up case, we simplify things by preceding the
+ * whiteout or cover up with copy up. This makes sure that there is an index
+ * upper inode where the nlink xattr can be stored before the copied up upper
+ * entry is unlink.
+ */
+#define OVL_NLINK_ADD_UPPER (1 << 0)
+
+/*
+ * On-disk format for indexed nlink:
+ *
+ * nlink relative to the upper inode - "U[+-]NUM"
+ * nlink relative to the lower inode - "L[+-]NUM"
+ */
+
+static int ovl_set_nlink_common(struct dentry *dentry,
+ struct dentry *realdentry, const char *format)
+{
+ struct inode *inode = d_inode(dentry);
+ struct inode *realinode = d_inode(realdentry);
+ char buf[13];
+ int len;
+
+ len = snprintf(buf, sizeof(buf), format,
+ (int) (inode->i_nlink - realinode->i_nlink));
+
+ return ovl_do_setxattr(ovl_dentry_upper(dentry),
+ OVL_XATTR_NLINK, buf, len, 0);
+}
+
+int ovl_set_nlink_upper(struct dentry *dentry)
+{
+ return ovl_set_nlink_common(dentry, ovl_dentry_upper(dentry), "U%+i");
+}
+
+int ovl_set_nlink_lower(struct dentry *dentry)
+{
+ return ovl_set_nlink_common(dentry, ovl_dentry_lower(dentry), "L%+i");
+}
+
+unsigned int ovl_get_nlink(struct dentry *lowerdentry,
+ struct dentry *upperdentry,
+ unsigned int fallback)
+{
+ int nlink_diff;
+ int nlink;
+ char buf[13];
+ int err;
+
+ if (!lowerdentry || !upperdentry || d_inode(lowerdentry)->i_nlink == 1)
+ return fallback;
+
+ err = vfs_getxattr(upperdentry, OVL_XATTR_NLINK, &buf, sizeof(buf) - 1);
+ if (err < 0)
+ goto fail;
+
+ buf[err] = '\0';
+ if ((buf[0] != 'L' && buf[0] != 'U') ||
+ (buf[1] != '+' && buf[1] != '-'))
+ goto fail;
+
+ err = kstrtoint(buf + 1, 10, &nlink_diff);
+ if (err < 0)
+ goto fail;
+
+ nlink = d_inode(buf[0] == 'L' ? lowerdentry : upperdentry)->i_nlink;
+ nlink += nlink_diff;
+
+ if (nlink <= 0)
+ goto fail;
+
+ return nlink;
+
+fail:
+ pr_warn_ratelimited("overlayfs: failed to get index nlink (%pd2, err=%i)\n",
+ upperdentry, err);
+ return fallback;
+}
+
struct inode *ovl_new_inode(struct super_block *sb, umode_t mode, dev_t rdev)
{
struct inode *inode;
@@ -453,27 +564,87 @@
static int ovl_inode_test(struct inode *inode, void *data)
{
- return ovl_inode_real(inode, NULL) == data;
+ return inode->i_private == data;
}
static int ovl_inode_set(struct inode *inode, void *data)
{
- inode->i_private = (void *) (((unsigned long) data) | OVL_ISUPPER_MASK);
+ inode->i_private = data;
return 0;
}
-struct inode *ovl_get_inode(struct super_block *sb, struct inode *realinode)
-
+static bool ovl_verify_inode(struct inode *inode, struct dentry *lowerdentry,
+ struct dentry *upperdentry)
{
+ struct inode *lowerinode = lowerdentry ? d_inode(lowerdentry) : NULL;
+
+ /* Lower (origin) inode must match, even if NULL */
+ if (ovl_inode_lower(inode) != lowerinode)
+ return false;
+
+ /*
+ * Allow non-NULL __upperdentry in inode even if upperdentry is NULL.
+ * This happens when finding a lower alias for a copied up hard link.
+ */
+ if (upperdentry && ovl_inode_upper(inode) != d_inode(upperdentry))
+ return false;
+
+ return true;
+}
+
+struct inode *ovl_get_inode(struct dentry *dentry, struct dentry *upperdentry)
+{
+ struct dentry *lowerdentry = ovl_dentry_lower(dentry);
+ struct inode *realinode = upperdentry ? d_inode(upperdentry) : NULL;
struct inode *inode;
- inode = iget5_locked(sb, (unsigned long) realinode,
- ovl_inode_test, ovl_inode_set, realinode);
- if (inode && inode->i_state & I_NEW) {
- ovl_fill_inode(inode, realinode->i_mode, realinode->i_rdev);
- set_nlink(inode, realinode->i_nlink);
- unlock_new_inode(inode);
- }
+ if (!realinode)
+ realinode = d_inode(lowerdentry);
+ if (!S_ISDIR(realinode->i_mode) &&
+ (upperdentry || (lowerdentry && ovl_indexdir(dentry->d_sb)))) {
+ struct inode *key = d_inode(lowerdentry ?: upperdentry);
+ unsigned int nlink;
+
+ inode = iget5_locked(dentry->d_sb, (unsigned long) key,
+ ovl_inode_test, ovl_inode_set, key);
+ if (!inode)
+ goto out_nomem;
+ if (!(inode->i_state & I_NEW)) {
+ /*
+ * Verify that the underlying files stored in the inode
+ * match those in the dentry.
+ */
+ if (!ovl_verify_inode(inode, lowerdentry, upperdentry)) {
+ iput(inode);
+ inode = ERR_PTR(-ESTALE);
+ goto out;
+ }
+
+ dput(upperdentry);
+ goto out;
+ }
+
+ nlink = ovl_get_nlink(lowerdentry, upperdentry,
+ realinode->i_nlink);
+ set_nlink(inode, nlink);
+ } else {
+ inode = new_inode(dentry->d_sb);
+ if (!inode)
+ goto out_nomem;
+ }
+ ovl_fill_inode(inode, realinode->i_mode, realinode->i_rdev);
+ ovl_inode_init(inode, upperdentry, lowerdentry);
+
+ if (upperdentry && ovl_is_impuredir(upperdentry))
+ ovl_set_flag(OVL_IMPURE, inode);
+
+ if (inode->i_state & I_NEW)
+ unlock_new_inode(inode);
+out:
return inode;
+
+out_nomem:
+ inode = ERR_PTR(-ENOMEM);
+ goto out;
}
diff --git a/fs/overlayfs/namei.c b/fs/overlayfs/namei.c
index de0d4f7..8aef2b3 100644
--- a/fs/overlayfs/namei.c
+++ b/fs/overlayfs/namei.c
@@ -88,13 +88,10 @@
return 1;
}
-static struct dentry *ovl_get_origin(struct dentry *dentry,
- struct vfsmount *mnt)
+static struct ovl_fh *ovl_get_origin_fh(struct dentry *dentry)
{
int res;
struct ovl_fh *fh = NULL;
- struct dentry *origin = NULL;
- int bytes;
res = vfs_getxattr(dentry, OVL_XATTR_ORIGIN, NULL, 0);
if (res < 0) {
@@ -106,7 +103,7 @@
if (res == 0)
return NULL;
- fh = kzalloc(res, GFP_TEMPORARY);
+ fh = kzalloc(res, GFP_TEMPORARY);
if (!fh)
return ERR_PTR(-ENOMEM);
@@ -129,7 +126,29 @@
(fh->flags & OVL_FH_FLAG_BIG_ENDIAN) != OVL_FH_FLAG_CPU_ENDIAN)
goto out;
- bytes = (fh->len - offsetof(struct ovl_fh, fid));
+ return fh;
+
+out:
+ kfree(fh);
+ return NULL;
+
+fail:
+ pr_warn_ratelimited("overlayfs: failed to get origin (%i)\n", res);
+ goto out;
+invalid:
+ pr_warn_ratelimited("overlayfs: invalid origin (%*phN)\n", res, fh);
+ goto out;
+}
+
+static struct dentry *ovl_get_origin(struct dentry *dentry,
+ struct vfsmount *mnt)
+{
+ struct dentry *origin = NULL;
+ struct ovl_fh *fh = ovl_get_origin_fh(dentry);
+ int bytes;
+
+ if (IS_ERR_OR_NULL(fh))
+ return (struct dentry *)fh;
/*
* Make sure that the stored uuid matches the uuid of the lower
@@ -138,6 +157,7 @@
if (!uuid_equal(&fh->uuid, &mnt->mnt_sb->s_uuid))
goto out;
+ bytes = (fh->len - offsetof(struct ovl_fh, fid));
origin = exportfs_decode_fh(mnt, (struct fid *)fh->fid,
bytes >> 2, (int)fh->type,
ovl_acceptable, NULL);
@@ -149,21 +169,17 @@
}
if (ovl_dentry_weird(origin) ||
- ((d_inode(origin)->i_mode ^ d_inode(dentry)->i_mode) & S_IFMT)) {
- dput(origin);
- origin = NULL;
+ ((d_inode(origin)->i_mode ^ d_inode(dentry)->i_mode) & S_IFMT))
goto invalid;
- }
out:
kfree(fh);
return origin;
-fail:
- pr_warn_ratelimited("overlayfs: failed to get origin (%i)\n", res);
- goto out;
invalid:
- pr_warn_ratelimited("overlayfs: invalid origin (%*phN)\n", res, fh);
+ pr_warn_ratelimited("overlayfs: invalid origin (%pd2)\n", origin);
+ dput(origin);
+ origin = NULL;
goto out;
}
@@ -269,34 +285,31 @@
}
-static int ovl_check_origin(struct dentry *dentry, struct dentry *upperdentry,
+static int ovl_check_origin(struct dentry *upperdentry,
+ struct path *lowerstack, unsigned int numlower,
struct path **stackp, unsigned int *ctrp)
{
- struct super_block *same_sb = ovl_same_sb(dentry->d_sb);
- struct ovl_entry *roe = dentry->d_sb->s_root->d_fsdata;
struct vfsmount *mnt;
- struct dentry *origin;
+ struct dentry *origin = NULL;
+ int i;
- if (!same_sb || !roe->numlower)
+
+ for (i = 0; i < numlower; i++) {
+ mnt = lowerstack[i].mnt;
+ origin = ovl_get_origin(upperdentry, mnt);
+ if (IS_ERR(origin))
+ return PTR_ERR(origin);
+
+ if (origin)
+ break;
+ }
+
+ if (!origin)
return 0;
- /*
- * Since all layers are on the same fs, we use the first layer for
- * decoding the file handle. We may get a disconnected dentry,
- * which is fine, because we only need to hold the origin inode in
- * cache and use its inode number. We may even get a connected dentry,
- * that is not under the first layer's root. That is also fine for
- * using it's inode number - it's the same as if we held a reference
- * to a dentry in first layer that was moved under us.
- */
- mnt = roe->lowerstack[0].mnt;
-
- origin = ovl_get_origin(upperdentry, mnt);
- if (IS_ERR_OR_NULL(origin))
- return PTR_ERR(origin);
-
- BUG_ON(*stackp || *ctrp);
- *stackp = kmalloc(sizeof(struct path), GFP_TEMPORARY);
+ BUG_ON(*ctrp);
+ if (!*stackp)
+ *stackp = kmalloc(sizeof(struct path), GFP_TEMPORARY);
if (!*stackp) {
dput(origin);
return -ENOMEM;
@@ -308,6 +321,238 @@
}
/*
+ * Verify that @fh matches the origin file handle stored in OVL_XATTR_ORIGIN.
+ * Return 0 on match, -ESTALE on mismatch, < 0 on error.
+ */
+static int ovl_verify_origin_fh(struct dentry *dentry, const struct ovl_fh *fh)
+{
+ struct ovl_fh *ofh = ovl_get_origin_fh(dentry);
+ int err = 0;
+
+ if (!ofh)
+ return -ENODATA;
+
+ if (IS_ERR(ofh))
+ return PTR_ERR(ofh);
+
+ if (fh->len != ofh->len || memcmp(fh, ofh, fh->len))
+ err = -ESTALE;
+
+ kfree(ofh);
+ return err;
+}
+
+/*
+ * Verify that an inode matches the origin file handle stored in upper inode.
+ *
+ * If @set is true and there is no stored file handle, encode and store origin
+ * file handle in OVL_XATTR_ORIGIN.
+ *
+ * Return 0 on match, -ESTALE on mismatch, < 0 on error.
+ */
+int ovl_verify_origin(struct dentry *dentry, struct vfsmount *mnt,
+ struct dentry *origin, bool is_upper, bool set)
+{
+ struct inode *inode;
+ struct ovl_fh *fh;
+ int err;
+
+ fh = ovl_encode_fh(origin, is_upper);
+ err = PTR_ERR(fh);
+ if (IS_ERR(fh))
+ goto fail;
+
+ err = ovl_verify_origin_fh(dentry, fh);
+ if (set && err == -ENODATA)
+ err = ovl_do_setxattr(dentry, OVL_XATTR_ORIGIN, fh, fh->len, 0);
+ if (err)
+ goto fail;
+
+out:
+ kfree(fh);
+ return err;
+
+fail:
+ inode = d_inode(origin);
+ pr_warn_ratelimited("overlayfs: failed to verify origin (%pd2, ino=%lu, err=%i)\n",
+ origin, inode ? inode->i_ino : 0, err);
+ goto out;
+}
+
+/*
+ * Verify that an index entry name matches the origin file handle stored in
+ * OVL_XATTR_ORIGIN and that origin file handle can be decoded to lower path.
+ * Return 0 on match, -ESTALE on mismatch or stale origin, < 0 on error.
+ */
+int ovl_verify_index(struct dentry *index, struct path *lowerstack,
+ unsigned int numlower)
+{
+ struct ovl_fh *fh = NULL;
+ size_t len;
+ struct path origin = { };
+ struct path *stack = &origin;
+ unsigned int ctr = 0;
+ int err;
+
+ if (!d_inode(index))
+ return 0;
+
+ /*
+ * Directory index entries are going to be used for looking up
+ * redirected upper dirs by lower dir fh when decoding an overlay
+ * file handle of a merge dir. Whiteout index entries are going to be
+ * used as an indication that an exported overlay file handle should
+ * be treated as stale (i.e. after unlink of the overlay inode).
+ * We don't know the verification rules for directory and whiteout
+ * index entries, because they have not been implemented yet, so return
+ * EROFS if those entries are found to avoid corrupting an index that
+ * was created by a newer kernel.
+ */
+ err = -EROFS;
+ if (d_is_dir(index) || ovl_is_whiteout(index))
+ goto fail;
+
+ err = -EINVAL;
+ if (index->d_name.len < sizeof(struct ovl_fh)*2)
+ goto fail;
+
+ err = -ENOMEM;
+ len = index->d_name.len / 2;
+ fh = kzalloc(len, GFP_TEMPORARY);
+ if (!fh)
+ goto fail;
+
+ err = -EINVAL;
+ if (hex2bin((u8 *)fh, index->d_name.name, len) || len != fh->len)
+ goto fail;
+
+ err = ovl_verify_origin_fh(index, fh);
+ if (err)
+ goto fail;
+
+ err = ovl_check_origin(index, lowerstack, numlower, &stack, &ctr);
+ if (!err && !ctr)
+ err = -ESTALE;
+ if (err)
+ goto fail;
+
+ /* Check if index is orphan and don't warn before cleaning it */
+ if (d_inode(index)->i_nlink == 1 &&
+ ovl_get_nlink(index, origin.dentry, 0) == 0)
+ err = -ENOENT;
+
+ dput(origin.dentry);
+out:
+ kfree(fh);
+ return err;
+
+fail:
+ pr_warn_ratelimited("overlayfs: failed to verify index (%pd2, ftype=%x, err=%i)\n",
+ index, d_inode(index)->i_mode & S_IFMT, err);
+ goto out;
+}
+
+/*
+ * Lookup in indexdir for the index entry of a lower real inode or a copy up
+ * origin inode. The index entry name is the hex representation of the lower
+ * inode file handle.
+ *
+ * If the index dentry in negative, then either no lower aliases have been
+ * copied up yet, or aliases have been copied up in older kernels and are
+ * not indexed.
+ *
+ * If the index dentry for a copy up origin inode is positive, but points
+ * to an inode different than the upper inode, then either the upper inode
+ * has been copied up and not indexed or it was indexed, but since then
+ * index dir was cleared. Either way, that index cannot be used to indentify
+ * the overlay inode.
+ */
+int ovl_get_index_name(struct dentry *origin, struct qstr *name)
+{
+ int err;
+ struct ovl_fh *fh;
+ char *n, *s;
+
+ fh = ovl_encode_fh(origin, false);
+ if (IS_ERR(fh))
+ return PTR_ERR(fh);
+
+ err = -ENOMEM;
+ n = kzalloc(fh->len * 2, GFP_TEMPORARY);
+ if (n) {
+ s = bin2hex(n, fh, fh->len);
+ *name = (struct qstr) QSTR_INIT(n, s - n);
+ err = 0;
+ }
+ kfree(fh);
+
+ return err;
+
+}
+
+static struct dentry *ovl_lookup_index(struct dentry *dentry,
+ struct dentry *upper,
+ struct dentry *origin)
+{
+ struct ovl_fs *ofs = dentry->d_sb->s_fs_info;
+ struct dentry *index;
+ struct inode *inode;
+ struct qstr name;
+ int err;
+
+ err = ovl_get_index_name(origin, &name);
+ if (err)
+ return ERR_PTR(err);
+
+ index = lookup_one_len_unlocked(name.name, ofs->indexdir, name.len);
+ if (IS_ERR(index)) {
+ pr_warn_ratelimited("overlayfs: failed inode index lookup (ino=%lu, key=%*s, err=%i);\n"
+ "overlayfs: mount with '-o index=off' to disable inodes index.\n",
+ d_inode(origin)->i_ino, name.len, name.name,
+ err);
+ goto out;
+ }
+
+ inode = d_inode(index);
+ if (d_is_negative(index)) {
+ if (upper && d_inode(origin)->i_nlink > 1) {
+ pr_warn_ratelimited("overlayfs: hard link with origin but no index (ino=%lu).\n",
+ d_inode(origin)->i_ino);
+ goto fail;
+ }
+
+ dput(index);
+ index = NULL;
+ } else if (upper && d_inode(upper) != inode) {
+ pr_warn_ratelimited("overlayfs: wrong index found (index=%pd2, ino=%lu, upper ino=%lu).\n",
+ index, inode->i_ino, d_inode(upper)->i_ino);
+ goto fail;
+ } else if (ovl_dentry_weird(index) || ovl_is_whiteout(index) ||
+ ((inode->i_mode ^ d_inode(origin)->i_mode) & S_IFMT)) {
+ /*
+ * Index should always be of the same file type as origin
+ * except for the case of a whiteout index. A whiteout
+ * index should only exist if all lower aliases have been
+ * unlinked, which means that finding a lower origin on lookup
+ * whose index is a whiteout should be treated as an error.
+ */
+ pr_warn_ratelimited("overlayfs: bad index found (index=%pd2, ftype=%x, origin ftype=%x).\n",
+ index, d_inode(index)->i_mode & S_IFMT,
+ d_inode(origin)->i_mode & S_IFMT);
+ goto fail;
+ }
+
+out:
+ kfree(name.name);
+ return index;
+
+fail:
+ dput(index);
+ index = ERR_PTR(-EIO);
+ goto out;
+}
+
+/*
* Returns next layer in stack starting from top.
* Returns -1 if this is the last layer.
*/
@@ -338,10 +583,10 @@
struct ovl_entry *roe = dentry->d_sb->s_root->d_fsdata;
struct path *stack = NULL;
struct dentry *upperdir, *upperdentry = NULL;
+ struct dentry *index = NULL;
unsigned int ctr = 0;
struct inode *inode = NULL;
bool upperopaque = false;
- bool upperimpure = false;
char *upperredirect = NULL;
struct dentry *this;
unsigned int i;
@@ -359,7 +604,7 @@
return ERR_PTR(-ENAMETOOLONG);
old_cred = ovl_override_creds(dentry->d_sb);
- upperdir = ovl_upperdentry_dereference(poe);
+ upperdir = ovl_dentry_upper(dentry->d_parent);
if (upperdir) {
err = ovl_lookup_layer(upperdir, &d, &upperdentry);
if (err)
@@ -372,8 +617,18 @@
}
if (upperdentry && !d.is_dir) {
BUG_ON(!d.stop || d.redirect);
- err = ovl_check_origin(dentry, upperdentry,
- &stack, &ctr);
+ /*
+ * Lookup copy up origin by decoding origin file handle.
+ * We may get a disconnected dentry, which is fine,
+ * because we only need to hold the origin inode in
+ * cache and use its inode number. We may even get a
+ * connected dentry, that is not under any of the lower
+ * layers root. That is also fine for using it's inode
+ * number - it's the same as if we held a reference
+ * to a dentry in lower layer that was moved under us.
+ */
+ err = ovl_check_origin(upperdentry, roe->lowerstack,
+ roe->numlower, &stack, &ctr);
if (err)
goto out;
}
@@ -386,8 +641,6 @@
poe = roe;
}
upperopaque = d.opaque;
- if (upperdentry && d.is_dir)
- upperimpure = ovl_is_impuredir(upperdentry);
}
if (!d.stop && poe->numlower) {
@@ -428,48 +681,56 @@
}
}
+ /* Lookup index by lower inode and verify it matches upper inode */
+ if (ctr && !d.is_dir && ovl_indexdir(dentry->d_sb)) {
+ struct dentry *origin = stack[0].dentry;
+
+ index = ovl_lookup_index(dentry, upperdentry, origin);
+ if (IS_ERR(index)) {
+ err = PTR_ERR(index);
+ index = NULL;
+ goto out_put;
+ }
+ }
+
oe = ovl_alloc_entry(ctr);
err = -ENOMEM;
if (!oe)
goto out_put;
+ oe->opaque = upperopaque;
+ memcpy(oe->lowerstack, stack, sizeof(struct path) * ctr);
+ dentry->d_fsdata = oe;
+
+ if (upperdentry)
+ ovl_dentry_set_upper_alias(dentry);
+ else if (index)
+ upperdentry = dget(index);
+
if (upperdentry || ctr) {
- struct dentry *realdentry;
- struct inode *realinode;
-
- realdentry = upperdentry ? upperdentry : stack[0].dentry;
- realinode = d_inode(realdentry);
-
- err = -ENOMEM;
- if (upperdentry && !d_is_dir(upperdentry)) {
- inode = ovl_get_inode(dentry->d_sb, realinode);
- } else {
- inode = ovl_new_inode(dentry->d_sb, realinode->i_mode,
- realinode->i_rdev);
- if (inode)
- ovl_inode_init(inode, realinode, !!upperdentry);
- }
- if (!inode)
+ inode = ovl_get_inode(dentry, upperdentry);
+ err = PTR_ERR(inode);
+ if (IS_ERR(inode))
goto out_free_oe;
- ovl_copyattr(realdentry->d_inode, inode);
+
+ OVL_I(inode)->redirect = upperredirect;
+ if (index)
+ ovl_set_flag(OVL_INDEX, inode);
}
revert_creds(old_cred);
- oe->opaque = upperopaque;
- oe->impure = upperimpure;
- oe->redirect = upperredirect;
- oe->__upperdentry = upperdentry;
- memcpy(oe->lowerstack, stack, sizeof(struct path) * ctr);
+ dput(index);
kfree(stack);
kfree(d.redirect);
- dentry->d_fsdata = oe;
d_add(dentry, inode);
return NULL;
out_free_oe:
+ dentry->d_fsdata = NULL;
kfree(oe);
out_put:
+ dput(index);
for (i = 0; i < ctr; i++)
dput(stack[i].dentry);
kfree(stack);
@@ -499,7 +760,7 @@
return oe->opaque;
/* Negative upper -> positive lower */
- if (!oe->__upperdentry)
+ if (!ovl_dentry_upper(dentry))
return true;
/* Positive upper -> have to look up lower to see whether it exists */
diff --git a/fs/overlayfs/overlayfs.h b/fs/overlayfs/overlayfs.h
index 10863b4..e927a62 100644
--- a/fs/overlayfs/overlayfs.h
+++ b/fs/overlayfs/overlayfs.h
@@ -25,6 +25,12 @@
#define OVL_XATTR_REDIRECT OVL_XATTR_PREFIX "redirect"
#define OVL_XATTR_ORIGIN OVL_XATTR_PREFIX "origin"
#define OVL_XATTR_IMPURE OVL_XATTR_PREFIX "impure"
+#define OVL_XATTR_NLINK OVL_XATTR_PREFIX "nlink"
+
+enum ovl_flag {
+ OVL_IMPURE,
+ OVL_INDEX,
+};
/*
* The tuple (fh,uuid) is a universal unique identifier for a copy up origin,
@@ -38,8 +44,11 @@
/* CPU byte order required for fid decoding: */
#define OVL_FH_FLAG_BIG_ENDIAN (1 << 0)
#define OVL_FH_FLAG_ANY_ENDIAN (1 << 1)
+/* Is the real inode encoded in fid an upper inode? */
+#define OVL_FH_FLAG_PATH_UPPER (1 << 2)
-#define OVL_FH_FLAG_ALL (OVL_FH_FLAG_BIG_ENDIAN | OVL_FH_FLAG_ANY_ENDIAN)
+#define OVL_FH_FLAG_ALL (OVL_FH_FLAG_BIG_ENDIAN | OVL_FH_FLAG_ANY_ENDIAN | \
+ OVL_FH_FLAG_PATH_UPPER)
#if defined(__LITTLE_ENDIAN)
#define OVL_FH_FLAG_CPU_ENDIAN 0
@@ -60,8 +69,6 @@
u8 fid[0]; /* file identifier */
} __packed;
-#define OVL_ISUPPER_MASK 1UL
-
static inline int ovl_do_rmdir(struct inode *dir, struct dentry *dentry)
{
int err = vfs_rmdir(dir, dentry);
@@ -175,22 +182,14 @@
return ret;
}
-static inline struct inode *ovl_inode_real(struct inode *inode, bool *is_upper)
-{
- unsigned long x = (unsigned long) READ_ONCE(inode->i_private);
-
- if (is_upper)
- *is_upper = x & OVL_ISUPPER_MASK;
-
- return (struct inode *) (x & ~OVL_ISUPPER_MASK);
-}
-
/* util.c */
int ovl_want_write(struct dentry *dentry);
void ovl_drop_write(struct dentry *dentry);
struct dentry *ovl_workdir(struct dentry *dentry);
const struct cred *ovl_override_creds(struct super_block *sb);
struct super_block *ovl_same_sb(struct super_block *sb);
+bool ovl_can_decode_fh(struct super_block *sb);
+struct dentry *ovl_indexdir(struct super_block *sb);
struct ovl_entry *ovl_alloc_entry(unsigned int numlower);
bool ovl_dentry_remote(struct dentry *dentry);
bool ovl_dentry_weird(struct dentry *dentry);
@@ -201,19 +200,23 @@
struct dentry *ovl_dentry_upper(struct dentry *dentry);
struct dentry *ovl_dentry_lower(struct dentry *dentry);
struct dentry *ovl_dentry_real(struct dentry *dentry);
+struct dentry *ovl_i_dentry_upper(struct inode *inode);
+struct inode *ovl_inode_upper(struct inode *inode);
+struct inode *ovl_inode_lower(struct inode *inode);
+struct inode *ovl_inode_real(struct inode *inode);
struct ovl_dir_cache *ovl_dir_cache(struct dentry *dentry);
void ovl_set_dir_cache(struct dentry *dentry, struct ovl_dir_cache *cache);
bool ovl_dentry_is_opaque(struct dentry *dentry);
-bool ovl_dentry_is_impure(struct dentry *dentry);
bool ovl_dentry_is_whiteout(struct dentry *dentry);
void ovl_dentry_set_opaque(struct dentry *dentry);
+bool ovl_dentry_has_upper_alias(struct dentry *dentry);
+void ovl_dentry_set_upper_alias(struct dentry *dentry);
bool ovl_redirect_dir(struct super_block *sb);
const char *ovl_dentry_get_redirect(struct dentry *dentry);
void ovl_dentry_set_redirect(struct dentry *dentry, const char *redirect);
-void ovl_dentry_update(struct dentry *dentry, struct dentry *upperdentry);
-void ovl_inode_init(struct inode *inode, struct inode *realinode,
- bool is_upper);
-void ovl_inode_update(struct inode *inode, struct inode *upperinode);
+void ovl_inode_init(struct inode *inode, struct dentry *upperdentry,
+ struct dentry *lowerdentry);
+void ovl_inode_update(struct inode *inode, struct dentry *upperdentry);
void ovl_dentry_version_inc(struct dentry *dentry);
u64 ovl_dentry_version_get(struct dentry *dentry);
bool ovl_is_whiteout(struct dentry *dentry);
@@ -225,6 +228,12 @@
const char *name, const void *value, size_t size,
int xerr);
int ovl_set_impure(struct dentry *dentry, struct dentry *upperdentry);
+void ovl_set_flag(unsigned long flag, struct inode *inode);
+bool ovl_test_flag(unsigned long flag, struct inode *inode);
+bool ovl_inuse_trylock(struct dentry *dentry);
+void ovl_inuse_unlock(struct dentry *dentry);
+int ovl_nlink_start(struct dentry *dentry, bool *locked);
+void ovl_nlink_end(struct dentry *dentry, bool locked);
static inline bool ovl_is_impuredir(struct dentry *dentry)
{
@@ -233,6 +242,11 @@
/* namei.c */
+int ovl_verify_origin(struct dentry *dentry, struct vfsmount *mnt,
+ struct dentry *origin, bool is_upper, bool set);
+int ovl_verify_index(struct dentry *index, struct path *lowerstack,
+ unsigned int numlower);
+int ovl_get_index_name(struct dentry *origin, struct qstr *name);
int ovl_path_next(int idx, struct dentry *dentry, struct path *path);
struct dentry *ovl_lookup(struct inode *dir, struct dentry *dentry, unsigned int flags);
bool ovl_lower_positive(struct dentry *dentry);
@@ -245,15 +259,22 @@
int ovl_check_d_type_supported(struct path *realpath);
void ovl_workdir_cleanup(struct inode *dir, struct vfsmount *mnt,
struct dentry *dentry, int level);
+int ovl_indexdir_cleanup(struct dentry *dentry, struct vfsmount *mnt,
+ struct path *lowerstack, unsigned int numlower);
/* inode.c */
+int ovl_set_nlink_upper(struct dentry *dentry);
+int ovl_set_nlink_lower(struct dentry *dentry);
+unsigned int ovl_get_nlink(struct dentry *lowerdentry,
+ struct dentry *upperdentry,
+ unsigned int fallback);
int ovl_setattr(struct dentry *dentry, struct iattr *attr);
int ovl_getattr(const struct path *path, struct kstat *stat,
u32 request_mask, unsigned int flags);
int ovl_permission(struct inode *inode, int mask);
-int ovl_xattr_set(struct dentry *dentry, const char *name, const void *value,
- size_t size, int flags);
-int ovl_xattr_get(struct dentry *dentry, const char *name,
+int ovl_xattr_set(struct dentry *dentry, struct inode *inode, const char *name,
+ const void *value, size_t size, int flags);
+int ovl_xattr_get(struct dentry *dentry, struct inode *inode, const char *name,
void *value, size_t size);
ssize_t ovl_listxattr(struct dentry *dentry, char *list, size_t size);
struct posix_acl *ovl_get_acl(struct inode *inode, int type);
@@ -262,7 +283,7 @@
bool ovl_is_private_xattr(const char *name);
struct inode *ovl_new_inode(struct super_block *sb, umode_t mode, dev_t rdev);
-struct inode *ovl_get_inode(struct super_block *sb, struct inode *realinode);
+struct inode *ovl_get_inode(struct dentry *dentry, struct dentry *upperdentry);
static inline void ovl_copyattr(struct inode *from, struct inode *to)
{
to->i_uid = from->i_uid;
@@ -284,10 +305,11 @@
int ovl_create_real(struct inode *dir, struct dentry *newdentry,
struct cattr *attr,
struct dentry *hardlink, bool debug);
-void ovl_cleanup(struct inode *dir, struct dentry *dentry);
+int ovl_cleanup(struct inode *dir, struct dentry *dentry);
/* copy_up.c */
int ovl_copy_up(struct dentry *dentry);
int ovl_copy_up_flags(struct dentry *dentry, int flags);
int ovl_copy_xattr(struct dentry *old, struct dentry *new);
int ovl_set_attr(struct dentry *upper, struct kstat *stat);
+struct ovl_fh *ovl_encode_fh(struct dentry *lower, bool is_upper);
diff --git a/fs/overlayfs/ovl_entry.h b/fs/overlayfs/ovl_entry.h
index 34bc4a9..878a750 100644
--- a/fs/overlayfs/ovl_entry.h
+++ b/fs/overlayfs/ovl_entry.h
@@ -14,6 +14,7 @@
char *workdir;
bool default_permissions;
bool redirect_dir;
+ bool index;
};
/* private information held for overlayfs's superblock */
@@ -21,7 +22,12 @@
struct vfsmount *upper_mnt;
unsigned numlower;
struct vfsmount **lower_mnt;
+ /* workbasedir is the path at workdir= mount option */
+ struct dentry *workbasedir;
+ /* workdir is the 'work' directory under workbasedir */
struct dentry *workdir;
+ /* index directory listing overlay inodes by origin file handle */
+ struct dentry *indexdir;
long namelen;
/* pathnames of lower and upper dirs, for show_options */
struct ovl_config config;
@@ -29,22 +35,16 @@
const struct cred *creator_cred;
bool tmpfile;
bool noxattr;
- wait_queue_head_t copyup_wq;
/* sb common to all layers */
struct super_block *same_sb;
};
/* private information held for every overlayfs dentry */
struct ovl_entry {
- struct dentry *__upperdentry;
- struct ovl_dir_cache *cache;
union {
struct {
- u64 version;
- const char *redirect;
+ unsigned long has_upper;
bool opaque;
- bool impure;
- bool copying;
};
struct rcu_head rcu;
};
@@ -54,7 +54,25 @@
struct ovl_entry *ovl_alloc_entry(unsigned int numlower);
-static inline struct dentry *ovl_upperdentry_dereference(struct ovl_entry *oe)
+struct ovl_inode {
+ struct ovl_dir_cache *cache;
+ const char *redirect;
+ u64 version;
+ unsigned long flags;
+ struct inode vfs_inode;
+ struct dentry *__upperdentry;
+ struct inode *lower;
+
+ /* synchronize copy up and more */
+ struct mutex lock;
+};
+
+static inline struct ovl_inode *OVL_I(struct inode *inode)
{
- return lockless_dereference(oe->__upperdentry);
+ return container_of(inode, struct ovl_inode, vfs_inode);
+}
+
+static inline struct dentry *ovl_upperdentry_dereference(struct ovl_inode *oi)
+{
+ return lockless_dereference(oi->__upperdentry);
}
diff --git a/fs/overlayfs/readdir.c b/fs/overlayfs/readdir.c
index f241b4e..3d424a5 100644
--- a/fs/overlayfs/readdir.c
+++ b/fs/overlayfs/readdir.c
@@ -667,3 +667,56 @@
ovl_cleanup(dir, dentry);
}
}
+
+int ovl_indexdir_cleanup(struct dentry *dentry, struct vfsmount *mnt,
+ struct path *lowerstack, unsigned int numlower)
+{
+ int err;
+ struct inode *dir = dentry->d_inode;
+ struct path path = { .mnt = mnt, .dentry = dentry };
+ LIST_HEAD(list);
+ struct ovl_cache_entry *p;
+ struct ovl_readdir_data rdd = {
+ .ctx.actor = ovl_fill_merge,
+ .dentry = NULL,
+ .list = &list,
+ .root = RB_ROOT,
+ .is_lowest = false,
+ };
+
+ err = ovl_dir_read(&path, &rdd);
+ if (err)
+ goto out;
+
+ inode_lock_nested(dir, I_MUTEX_PARENT);
+ list_for_each_entry(p, &list, l_node) {
+ struct dentry *index;
+
+ if (p->name[0] == '.') {
+ if (p->len == 1)
+ continue;
+ if (p->len == 2 && p->name[1] == '.')
+ continue;
+ }
+ index = lookup_one_len(p->name, dentry, p->len);
+ if (IS_ERR(index)) {
+ err = PTR_ERR(index);
+ break;
+ }
+ err = ovl_verify_index(index, lowerstack, numlower);
+ if (err) {
+ if (err == -EROFS)
+ break;
+ err = ovl_cleanup(dir, index);
+ if (err)
+ break;
+ }
+ dput(index);
+ }
+ inode_unlock(dir);
+out:
+ ovl_cache_free(&list);
+ if (err)
+ pr_err("overlayfs: failed index dir cleanup (%i)\n", err);
+ return err;
+}
diff --git a/fs/overlayfs/super.c b/fs/overlayfs/super.c
index 4882ffb..d86e89f 100644
--- a/fs/overlayfs/super.c
+++ b/fs/overlayfs/super.c
@@ -34,6 +34,11 @@
MODULE_PARM_DESC(ovl_redirect_dir_def,
"Default to on or off for the redirect_dir feature");
+static bool ovl_index_def = IS_ENABLED(CONFIG_OVERLAY_FS_INDEX);
+module_param_named(index, ovl_index_def, bool, 0644);
+MODULE_PARM_DESC(ovl_index_def,
+ "Default to on or off for the inodes index feature");
+
static void ovl_dentry_release(struct dentry *dentry)
{
struct ovl_entry *oe = dentry->d_fsdata;
@@ -41,8 +46,6 @@
if (oe) {
unsigned int i;
- dput(oe->__upperdentry);
- kfree(oe->redirect);
for (i = 0; i < oe->numlower; i++)
dput(oe->lowerstack[i].dentry);
kfree_rcu(oe, rcu);
@@ -165,12 +168,52 @@
.d_weak_revalidate = ovl_dentry_weak_revalidate,
};
+static struct kmem_cache *ovl_inode_cachep;
+
+static struct inode *ovl_alloc_inode(struct super_block *sb)
+{
+ struct ovl_inode *oi = kmem_cache_alloc(ovl_inode_cachep, GFP_KERNEL);
+
+ oi->cache = NULL;
+ oi->redirect = NULL;
+ oi->version = 0;
+ oi->flags = 0;
+ oi->__upperdentry = NULL;
+ oi->lower = NULL;
+ mutex_init(&oi->lock);
+
+ return &oi->vfs_inode;
+}
+
+static void ovl_i_callback(struct rcu_head *head)
+{
+ struct inode *inode = container_of(head, struct inode, i_rcu);
+
+ kmem_cache_free(ovl_inode_cachep, OVL_I(inode));
+}
+
+static void ovl_destroy_inode(struct inode *inode)
+{
+ struct ovl_inode *oi = OVL_I(inode);
+
+ dput(oi->__upperdentry);
+ kfree(oi->redirect);
+ mutex_destroy(&oi->lock);
+
+ call_rcu(&inode->i_rcu, ovl_i_callback);
+}
+
static void ovl_put_super(struct super_block *sb)
{
struct ovl_fs *ufs = sb->s_fs_info;
unsigned i;
+ dput(ufs->indexdir);
dput(ufs->workdir);
+ ovl_inuse_unlock(ufs->workbasedir);
+ dput(ufs->workbasedir);
+ if (ufs->upper_mnt)
+ ovl_inuse_unlock(ufs->upper_mnt->mnt_root);
mntput(ufs->upper_mnt);
for (i = 0; i < ufs->numlower; i++)
mntput(ufs->lower_mnt[i]);
@@ -228,6 +271,12 @@
return err;
}
+/* Will this overlay be forced to mount/remount ro? */
+static bool ovl_force_readonly(struct ovl_fs *ufs)
+{
+ return (!ufs->upper_mnt || !ufs->workdir);
+}
+
/**
* ovl_show_options
*
@@ -249,6 +298,9 @@
if (ufs->config.redirect_dir != ovl_redirect_dir_def)
seq_printf(m, ",redirect_dir=%s",
ufs->config.redirect_dir ? "on" : "off");
+ if (ufs->config.index != ovl_index_def)
+ seq_printf(m, ",index=%s",
+ ufs->config.index ? "on" : "off");
return 0;
}
@@ -256,19 +308,21 @@
{
struct ovl_fs *ufs = sb->s_fs_info;
- if (!(*flags & MS_RDONLY) && (!ufs->upper_mnt || !ufs->workdir))
+ if (!(*flags & MS_RDONLY) && ovl_force_readonly(ufs))
return -EROFS;
return 0;
}
static const struct super_operations ovl_super_operations = {
+ .alloc_inode = ovl_alloc_inode,
+ .destroy_inode = ovl_destroy_inode,
+ .drop_inode = generic_delete_inode,
.put_super = ovl_put_super,
.sync_fs = ovl_sync_fs,
.statfs = ovl_statfs,
.show_options = ovl_show_options,
.remount_fs = ovl_remount,
- .drop_inode = generic_delete_inode,
};
enum {
@@ -278,6 +332,8 @@
OPT_DEFAULT_PERMISSIONS,
OPT_REDIRECT_DIR_ON,
OPT_REDIRECT_DIR_OFF,
+ OPT_INDEX_ON,
+ OPT_INDEX_OFF,
OPT_ERR,
};
@@ -288,6 +344,8 @@
{OPT_DEFAULT_PERMISSIONS, "default_permissions"},
{OPT_REDIRECT_DIR_ON, "redirect_dir=on"},
{OPT_REDIRECT_DIR_OFF, "redirect_dir=off"},
+ {OPT_INDEX_ON, "index=on"},
+ {OPT_INDEX_OFF, "index=off"},
{OPT_ERR, NULL}
};
@@ -360,6 +418,14 @@
config->redirect_dir = false;
break;
+ case OPT_INDEX_ON:
+ config->index = true;
+ break;
+
+ case OPT_INDEX_OFF:
+ config->index = false;
+ break;
+
default:
pr_err("overlayfs: unrecognized mount option \"%s\" or missing value\n", p);
return -EINVAL;
@@ -378,23 +444,29 @@
}
#define OVL_WORKDIR_NAME "work"
+#define OVL_INDEXDIR_NAME "index"
-static struct dentry *ovl_workdir_create(struct vfsmount *mnt,
- struct dentry *dentry)
+static struct dentry *ovl_workdir_create(struct super_block *sb,
+ struct ovl_fs *ufs,
+ struct dentry *dentry,
+ const char *name, bool persist)
{
struct inode *dir = dentry->d_inode;
+ struct vfsmount *mnt = ufs->upper_mnt;
struct dentry *work;
int err;
bool retried = false;
+ bool locked = false;
err = mnt_want_write(mnt);
if (err)
- return ERR_PTR(err);
+ goto out_err;
inode_lock_nested(dir, I_MUTEX_PARENT);
+ locked = true;
+
retry:
- work = lookup_one_len(OVL_WORKDIR_NAME, dentry,
- strlen(OVL_WORKDIR_NAME));
+ work = lookup_one_len(name, dentry, strlen(name));
if (!IS_ERR(work)) {
struct iattr attr = {
@@ -407,6 +479,9 @@
if (retried)
goto out_dput;
+ if (persist)
+ goto out_unlock;
+
retried = true;
ovl_workdir_cleanup(dir, mnt, work, 0);
dput(work);
@@ -446,16 +521,24 @@
inode_unlock(work->d_inode);
if (err)
goto out_dput;
+ } else {
+ err = PTR_ERR(work);
+ goto out_err;
}
out_unlock:
- inode_unlock(dir);
mnt_drop_write(mnt);
+ if (locked)
+ inode_unlock(dir);
return work;
out_dput:
dput(work);
- work = ERR_PTR(err);
+out_err:
+ pr_warn("overlayfs: failed to create directory %s/%s (errno: %i); mounting read-only\n",
+ ufs->config.workdir, name, -err);
+ sb->s_flags |= MS_RDONLY;
+ work = NULL;
goto out_unlock;
}
@@ -555,6 +638,15 @@
if (ovl_dentry_remote(path->dentry))
*remote = true;
+ /*
+ * The inodes index feature needs to encode and decode file
+ * handles, so it requires that all layers support them.
+ */
+ if (ofs->config.index && !ovl_can_decode_fh(path->dentry->d_sb)) {
+ ofs->config.index = false;
+ pr_warn("overlayfs: fs on '%s' does not support file handles, falling back to index=off.\n", name);
+ }
+
return 0;
out_put:
@@ -600,7 +692,7 @@
struct dentry *dentry, struct inode *inode,
const char *name, void *buffer, size_t size)
{
- return ovl_xattr_get(dentry, handler->name, buffer, size);
+ return ovl_xattr_get(dentry, inode, handler->name, buffer, size);
}
static int __maybe_unused
@@ -610,7 +702,7 @@
size_t size, int flags)
{
struct dentry *workdir = ovl_workdir(dentry);
- struct inode *realinode = ovl_inode_real(inode, NULL);
+ struct inode *realinode = ovl_inode_real(inode);
struct posix_acl *acl = NULL;
int err;
@@ -650,9 +742,9 @@
return err;
}
- err = ovl_xattr_set(dentry, handler->name, value, size, flags);
+ err = ovl_xattr_set(dentry, inode, handler->name, value, size, flags);
if (!err)
- ovl_copyattr(ovl_inode_real(inode, NULL), inode);
+ ovl_copyattr(ovl_inode_real(inode), inode);
return err;
@@ -680,7 +772,7 @@
struct dentry *dentry, struct inode *inode,
const char *name, void *buffer, size_t size)
{
- return ovl_xattr_get(dentry, name, buffer, size);
+ return ovl_xattr_get(dentry, inode, name, buffer, size);
}
static int ovl_other_xattr_set(const struct xattr_handler *handler,
@@ -688,7 +780,7 @@
const char *name, const void *value,
size_t size, int flags)
{
- return ovl_xattr_set(dentry, name, value, size, flags);
+ return ovl_xattr_set(dentry, inode, name, value, size, flags);
}
static const struct xattr_handler __maybe_unused
@@ -734,7 +826,6 @@
struct path upperpath = { };
struct path workpath = { };
struct dentry *root_dentry;
- struct inode *realinode;
struct ovl_entry *oe;
struct ovl_fs *ufs;
struct path *stack = NULL;
@@ -752,8 +843,8 @@
if (!ufs)
goto out;
- init_waitqueue_head(&ufs->copyup_wq);
ufs->config.redirect_dir = ovl_redirect_dir_def;
+ ufs->config.index = ovl_index_def;
err = ovl_parse_opt((char *) data, &ufs->config);
if (err)
goto out_free_config;
@@ -788,9 +879,15 @@
if (err)
goto out_put_upperpath;
+ err = -EBUSY;
+ if (!ovl_inuse_trylock(upperpath.dentry)) {
+ pr_err("overlayfs: upperdir is in-use by another mount\n");
+ goto out_put_upperpath;
+ }
+
err = ovl_mount_dir(ufs->config.workdir, &workpath);
if (err)
- goto out_put_upperpath;
+ goto out_unlock_upperdentry;
err = -EINVAL;
if (upperpath.mnt != workpath.mnt) {
@@ -801,12 +898,20 @@
pr_err("overlayfs: workdir and upperdir must be separate subtrees\n");
goto out_put_workpath;
}
+
+ err = -EBUSY;
+ if (!ovl_inuse_trylock(workpath.dentry)) {
+ pr_err("overlayfs: workdir is in-use by another mount\n");
+ goto out_put_workpath;
+ }
+
+ ufs->workbasedir = workpath.dentry;
sb->s_stack_depth = upperpath.mnt->mnt_sb->s_stack_depth;
}
err = -ENOMEM;
lowertmp = kstrdup(ufs->config.lowerdir, GFP_KERNEL);
if (!lowertmp)
- goto out_put_workpath;
+ goto out_unlock_workdentry;
err = -EINVAL;
stacklen = ovl_split_lowerdirs(lowertmp);
@@ -849,20 +954,14 @@
pr_err("overlayfs: failed to clone upperpath\n");
goto out_put_lowerpath;
}
+
/* Don't inherit atime flags */
ufs->upper_mnt->mnt_flags &= ~(MNT_NOATIME | MNT_NODIRATIME | MNT_RELATIME);
sb->s_time_gran = ufs->upper_mnt->mnt_sb->s_time_gran;
- ufs->workdir = ovl_workdir_create(ufs->upper_mnt, workpath.dentry);
- err = PTR_ERR(ufs->workdir);
- if (IS_ERR(ufs->workdir)) {
- pr_warn("overlayfs: failed to create directory %s/%s (errno: %i); mounting read-only\n",
- ufs->config.workdir, OVL_WORKDIR_NAME, -err);
- sb->s_flags |= MS_RDONLY;
- ufs->workdir = NULL;
- }
-
+ ufs->workdir = ovl_workdir_create(sb, ufs, workpath.dentry,
+ OVL_WORKDIR_NAME, false);
/*
* Upper should support d_type, else whiteouts are visible.
* Given workdir and upper are on same fs, we can do
@@ -904,6 +1003,13 @@
} else {
vfs_removexattr(ufs->workdir, OVL_XATTR_OPAQUE);
}
+
+ /* Check if upper/work fs supports file handles */
+ if (ufs->config.index &&
+ !ovl_can_decode_fh(ufs->workdir->d_sb)) {
+ ufs->config.index = false;
+ pr_warn("overlayfs: upper fs does not support file handles, falling back to index=off.\n");
+ }
}
}
@@ -941,14 +1047,49 @@
else if (ufs->upper_mnt->mnt_sb != ufs->same_sb)
ufs->same_sb = NULL;
+ if (!(ovl_force_readonly(ufs)) && ufs->config.index) {
+ /* Verify lower root is upper root origin */
+ err = ovl_verify_origin(upperpath.dentry, ufs->lower_mnt[0],
+ stack[0].dentry, false, true);
+ if (err) {
+ pr_err("overlayfs: failed to verify upper root origin\n");
+ goto out_put_lower_mnt;
+ }
+
+ ufs->indexdir = ovl_workdir_create(sb, ufs, workpath.dentry,
+ OVL_INDEXDIR_NAME, true);
+ if (ufs->indexdir) {
+ /* Verify upper root is index dir origin */
+ err = ovl_verify_origin(ufs->indexdir, ufs->upper_mnt,
+ upperpath.dentry, true, true);
+ if (err)
+ pr_err("overlayfs: failed to verify index dir origin\n");
+
+ /* Cleanup bad/stale/orphan index entries */
+ if (!err)
+ err = ovl_indexdir_cleanup(ufs->indexdir,
+ ufs->upper_mnt,
+ stack, numlower);
+ }
+ if (err || !ufs->indexdir)
+ pr_warn("overlayfs: try deleting index dir or mounting with '-o index=off' to disable inodes index.\n");
+ if (err)
+ goto out_put_indexdir;
+ }
+
+ /* Show index=off/on in /proc/mounts for any of the reasons above */
+ if (!ufs->indexdir)
+ ufs->config.index = false;
+
if (remote)
sb->s_d_op = &ovl_reval_dentry_operations;
else
sb->s_d_op = &ovl_dentry_operations;
+ err = -ENOMEM;
ufs->creator_cred = cred = prepare_creds();
if (!cred)
- goto out_put_lower_mnt;
+ goto out_put_indexdir;
/* Never override disk quota limits or use reserved space */
cap_lower(cred->cap_effective, CAP_SYS_RESOURCE);
@@ -971,12 +1112,13 @@
mntput(upperpath.mnt);
for (i = 0; i < numlower; i++)
mntput(stack[i].mnt);
- path_put(&workpath);
+ mntput(workpath.mnt);
kfree(lowertmp);
if (upperpath.dentry) {
- oe->__upperdentry = upperpath.dentry;
- oe->impure = ovl_is_impuredir(upperpath.dentry);
+ oe->has_upper = true;
+ if (ovl_is_impuredir(upperpath.dentry))
+ ovl_set_flag(OVL_IMPURE, d_inode(root_dentry));
}
for (i = 0; i < numlower; i++) {
oe->lowerstack[i].dentry = stack[i].dentry;
@@ -986,9 +1128,8 @@
root_dentry->d_fsdata = oe;
- realinode = d_inode(ovl_dentry_real(root_dentry));
- ovl_inode_init(d_inode(root_dentry), realinode, !!upperpath.dentry);
- ovl_copyattr(realinode, d_inode(root_dentry));
+ ovl_inode_init(d_inode(root_dentry), upperpath.dentry,
+ ovl_dentry_lower(root_dentry));
sb->s_root = root_dentry;
@@ -998,6 +1139,8 @@
kfree(oe);
out_put_cred:
put_cred(ufs->creator_cred);
+out_put_indexdir:
+ dput(ufs->indexdir);
out_put_lower_mnt:
for (i = 0; i < ufs->numlower; i++)
mntput(ufs->lower_mnt[i]);
@@ -1011,8 +1154,12 @@
kfree(stack);
out_free_lowertmp:
kfree(lowertmp);
+out_unlock_workdentry:
+ ovl_inuse_unlock(workpath.dentry);
out_put_workpath:
path_put(&workpath);
+out_unlock_upperdentry:
+ ovl_inuse_unlock(upperpath.dentry);
out_put_upperpath:
path_put(&upperpath);
out_free_config:
@@ -1038,14 +1185,43 @@
};
MODULE_ALIAS_FS("overlay");
+static void ovl_inode_init_once(void *foo)
+{
+ struct ovl_inode *oi = foo;
+
+ inode_init_once(&oi->vfs_inode);
+}
+
static int __init ovl_init(void)
{
- return register_filesystem(&ovl_fs_type);
+ int err;
+
+ ovl_inode_cachep = kmem_cache_create("ovl_inode",
+ sizeof(struct ovl_inode), 0,
+ (SLAB_RECLAIM_ACCOUNT|
+ SLAB_MEM_SPREAD|SLAB_ACCOUNT),
+ ovl_inode_init_once);
+ if (ovl_inode_cachep == NULL)
+ return -ENOMEM;
+
+ err = register_filesystem(&ovl_fs_type);
+ if (err)
+ kmem_cache_destroy(ovl_inode_cachep);
+
+ return err;
}
static void __exit ovl_exit(void)
{
unregister_filesystem(&ovl_fs_type);
+
+ /*
+ * Make sure all delayed rcu free inodes are flushed before we
+ * destroy cache.
+ */
+ rcu_barrier();
+ kmem_cache_destroy(ovl_inode_cachep);
+
}
module_init(ovl_init);
diff --git a/fs/overlayfs/util.c b/fs/overlayfs/util.c
index 8090489..f46ad75 100644
--- a/fs/overlayfs/util.c
+++ b/fs/overlayfs/util.c
@@ -12,6 +12,10 @@
#include <linux/slab.h>
#include <linux/cred.h>
#include <linux/xattr.h>
+#include <linux/exportfs.h>
+#include <linux/uuid.h>
+#include <linux/namei.h>
+#include <linux/ratelimit.h>
#include "overlayfs.h"
#include "ovl_entry.h"
@@ -47,6 +51,19 @@
return ofs->same_sb;
}
+bool ovl_can_decode_fh(struct super_block *sb)
+{
+ return (sb->s_export_op && sb->s_export_op->fh_to_dentry &&
+ !uuid_is_null(&sb->s_uuid));
+}
+
+struct dentry *ovl_indexdir(struct super_block *sb)
+{
+ struct ovl_fs *ofs = sb->s_fs_info;
+
+ return ofs->indexdir;
+}
+
struct ovl_entry *ovl_alloc_entry(unsigned int numlower)
{
size_t size = offsetof(struct ovl_entry, lowerstack[numlower]);
@@ -78,7 +95,7 @@
struct ovl_entry *oe = dentry->d_fsdata;
enum ovl_path_type type = 0;
- if (oe->__upperdentry) {
+ if (ovl_dentry_upper(dentry)) {
type = __OVL_PATH_UPPER;
/*
@@ -99,10 +116,9 @@
void ovl_path_upper(struct dentry *dentry, struct path *path)
{
struct ovl_fs *ofs = dentry->d_sb->s_fs_info;
- struct ovl_entry *oe = dentry->d_fsdata;
path->mnt = ofs->upper_mnt;
- path->dentry = ovl_upperdentry_dereference(oe);
+ path->dentry = ovl_dentry_upper(dentry);
}
void ovl_path_lower(struct dentry *dentry, struct path *path)
@@ -126,47 +142,52 @@
struct dentry *ovl_dentry_upper(struct dentry *dentry)
{
- struct ovl_entry *oe = dentry->d_fsdata;
-
- return ovl_upperdentry_dereference(oe);
-}
-
-static struct dentry *__ovl_dentry_lower(struct ovl_entry *oe)
-{
- return oe->numlower ? oe->lowerstack[0].dentry : NULL;
+ return ovl_upperdentry_dereference(OVL_I(d_inode(dentry)));
}
struct dentry *ovl_dentry_lower(struct dentry *dentry)
{
struct ovl_entry *oe = dentry->d_fsdata;
- return __ovl_dentry_lower(oe);
+ return oe->numlower ? oe->lowerstack[0].dentry : NULL;
}
struct dentry *ovl_dentry_real(struct dentry *dentry)
{
- struct ovl_entry *oe = dentry->d_fsdata;
- struct dentry *realdentry;
-
- realdentry = ovl_upperdentry_dereference(oe);
- if (!realdentry)
- realdentry = __ovl_dentry_lower(oe);
-
- return realdentry;
+ return ovl_dentry_upper(dentry) ?: ovl_dentry_lower(dentry);
}
+struct dentry *ovl_i_dentry_upper(struct inode *inode)
+{
+ return ovl_upperdentry_dereference(OVL_I(inode));
+}
+
+struct inode *ovl_inode_upper(struct inode *inode)
+{
+ struct dentry *upperdentry = ovl_i_dentry_upper(inode);
+
+ return upperdentry ? d_inode(upperdentry) : NULL;
+}
+
+struct inode *ovl_inode_lower(struct inode *inode)
+{
+ return OVL_I(inode)->lower;
+}
+
+struct inode *ovl_inode_real(struct inode *inode)
+{
+ return ovl_inode_upper(inode) ?: ovl_inode_lower(inode);
+}
+
+
struct ovl_dir_cache *ovl_dir_cache(struct dentry *dentry)
{
- struct ovl_entry *oe = dentry->d_fsdata;
-
- return oe->cache;
+ return OVL_I(d_inode(dentry))->cache;
}
void ovl_set_dir_cache(struct dentry *dentry, struct ovl_dir_cache *cache)
{
- struct ovl_entry *oe = dentry->d_fsdata;
-
- oe->cache = cache;
+ OVL_I(d_inode(dentry))->cache = cache;
}
bool ovl_dentry_is_opaque(struct dentry *dentry)
@@ -175,13 +196,6 @@
return oe->opaque;
}
-bool ovl_dentry_is_impure(struct dentry *dentry)
-{
- struct ovl_entry *oe = dentry->d_fsdata;
-
- return oe->impure;
-}
-
bool ovl_dentry_is_whiteout(struct dentry *dentry)
{
return !dentry->d_inode && ovl_dentry_is_opaque(dentry);
@@ -194,6 +208,25 @@
oe->opaque = true;
}
+/*
+ * For hard links it's possible for ovl_dentry_upper() to return positive, while
+ * there's no actual upper alias for the inode. Copy up code needs to know
+ * about the existence of the upper alias, so it can't use ovl_dentry_upper().
+ */
+bool ovl_dentry_has_upper_alias(struct dentry *dentry)
+{
+ struct ovl_entry *oe = dentry->d_fsdata;
+
+ return oe->has_upper;
+}
+
+void ovl_dentry_set_upper_alias(struct dentry *dentry)
+{
+ struct ovl_entry *oe = dentry->d_fsdata;
+
+ oe->has_upper = true;
+}
+
bool ovl_redirect_dir(struct super_block *sb)
{
struct ovl_fs *ofs = sb->s_fs_info;
@@ -203,63 +236,59 @@
const char *ovl_dentry_get_redirect(struct dentry *dentry)
{
- struct ovl_entry *oe = dentry->d_fsdata;
-
- return oe->redirect;
+ return OVL_I(d_inode(dentry))->redirect;
}
void ovl_dentry_set_redirect(struct dentry *dentry, const char *redirect)
{
- struct ovl_entry *oe = dentry->d_fsdata;
+ struct ovl_inode *oi = OVL_I(d_inode(dentry));
- kfree(oe->redirect);
- oe->redirect = redirect;
+ kfree(oi->redirect);
+ oi->redirect = redirect;
}
-void ovl_dentry_update(struct dentry *dentry, struct dentry *upperdentry)
+void ovl_inode_init(struct inode *inode, struct dentry *upperdentry,
+ struct dentry *lowerdentry)
{
- struct ovl_entry *oe = dentry->d_fsdata;
+ if (upperdentry)
+ OVL_I(inode)->__upperdentry = upperdentry;
+ if (lowerdentry)
+ OVL_I(inode)->lower = d_inode(lowerdentry);
- WARN_ON(!inode_is_locked(upperdentry->d_parent->d_inode));
- WARN_ON(oe->__upperdentry);
+ ovl_copyattr(d_inode(upperdentry ?: lowerdentry), inode);
+}
+
+void ovl_inode_update(struct inode *inode, struct dentry *upperdentry)
+{
+ struct inode *upperinode = d_inode(upperdentry);
+
+ WARN_ON(OVL_I(inode)->__upperdentry);
+
/*
- * Make sure upperdentry is consistent before making it visible to
- * ovl_upperdentry_dereference().
+ * Make sure upperdentry is consistent before making it visible
*/
smp_wmb();
- oe->__upperdentry = upperdentry;
-}
-
-void ovl_inode_init(struct inode *inode, struct inode *realinode, bool is_upper)
-{
- WRITE_ONCE(inode->i_private, (unsigned long) realinode |
- (is_upper ? OVL_ISUPPER_MASK : 0));
-}
-
-void ovl_inode_update(struct inode *inode, struct inode *upperinode)
-{
- WARN_ON(!upperinode);
- WARN_ON(!inode_unhashed(inode));
- WRITE_ONCE(inode->i_private,
- (unsigned long) upperinode | OVL_ISUPPER_MASK);
- if (!S_ISDIR(upperinode->i_mode))
+ OVL_I(inode)->__upperdentry = upperdentry;
+ if (!S_ISDIR(upperinode->i_mode) && inode_unhashed(inode)) {
+ inode->i_private = upperinode;
__insert_inode_hash(inode, (unsigned long) upperinode);
+ }
}
void ovl_dentry_version_inc(struct dentry *dentry)
{
- struct ovl_entry *oe = dentry->d_fsdata;
+ struct inode *inode = d_inode(dentry);
- WARN_ON(!inode_is_locked(dentry->d_inode));
- oe->version++;
+ WARN_ON(!inode_is_locked(inode));
+ OVL_I(inode)->version++;
}
u64 ovl_dentry_version_get(struct dentry *dentry)
{
- struct ovl_entry *oe = dentry->d_fsdata;
+ struct inode *inode = d_inode(dentry);
- WARN_ON(!inode_is_locked(dentry->d_inode));
- return oe->version;
+ WARN_ON(!inode_is_locked(inode));
+ return OVL_I(inode)->version;
}
bool ovl_is_whiteout(struct dentry *dentry)
@@ -276,32 +305,21 @@
int ovl_copy_up_start(struct dentry *dentry)
{
- struct ovl_fs *ofs = dentry->d_sb->s_fs_info;
- struct ovl_entry *oe = dentry->d_fsdata;
+ struct ovl_inode *oi = OVL_I(d_inode(dentry));
int err;
- spin_lock(&ofs->copyup_wq.lock);
- err = wait_event_interruptible_locked(ofs->copyup_wq, !oe->copying);
- if (!err) {
- if (oe->__upperdentry)
- err = 1; /* Already copied up */
- else
- oe->copying = true;
+ err = mutex_lock_interruptible(&oi->lock);
+ if (!err && ovl_dentry_has_upper_alias(dentry)) {
+ err = 1; /* Already copied up */
+ mutex_unlock(&oi->lock);
}
- spin_unlock(&ofs->copyup_wq.lock);
return err;
}
void ovl_copy_up_end(struct dentry *dentry)
{
- struct ovl_fs *ofs = dentry->d_sb->s_fs_info;
- struct ovl_entry *oe = dentry->d_fsdata;
-
- spin_lock(&ofs->copyup_wq.lock);
- oe->copying = false;
- wake_up_locked(&ofs->copyup_wq);
- spin_unlock(&ofs->copyup_wq.lock);
+ mutex_unlock(&OVL_I(d_inode(dentry))->lock);
}
bool ovl_check_dir_xattr(struct dentry *dentry, const char *name)
@@ -343,9 +361,8 @@
int ovl_set_impure(struct dentry *dentry, struct dentry *upperdentry)
{
int err;
- struct ovl_entry *oe = dentry->d_fsdata;
- if (oe->impure)
+ if (ovl_test_flag(OVL_IMPURE, d_inode(dentry)))
return 0;
/*
@@ -355,7 +372,176 @@
err = ovl_check_setxattr(dentry, upperdentry, OVL_XATTR_IMPURE,
"y", 1, 0);
if (!err)
- oe->impure = true;
+ ovl_set_flag(OVL_IMPURE, d_inode(dentry));
return err;
}
+
+void ovl_set_flag(unsigned long flag, struct inode *inode)
+{
+ set_bit(flag, &OVL_I(inode)->flags);
+}
+
+bool ovl_test_flag(unsigned long flag, struct inode *inode)
+{
+ return test_bit(flag, &OVL_I(inode)->flags);
+}
+
+/**
+ * Caller must hold a reference to inode to prevent it from being freed while
+ * it is marked inuse.
+ */
+bool ovl_inuse_trylock(struct dentry *dentry)
+{
+ struct inode *inode = d_inode(dentry);
+ bool locked = false;
+
+ spin_lock(&inode->i_lock);
+ if (!(inode->i_state & I_OVL_INUSE)) {
+ inode->i_state |= I_OVL_INUSE;
+ locked = true;
+ }
+ spin_unlock(&inode->i_lock);
+
+ return locked;
+}
+
+void ovl_inuse_unlock(struct dentry *dentry)
+{
+ if (dentry) {
+ struct inode *inode = d_inode(dentry);
+
+ spin_lock(&inode->i_lock);
+ WARN_ON(!(inode->i_state & I_OVL_INUSE));
+ inode->i_state &= ~I_OVL_INUSE;
+ spin_unlock(&inode->i_lock);
+ }
+}
+
+/* Called must hold OVL_I(inode)->oi_lock */
+static void ovl_cleanup_index(struct dentry *dentry)
+{
+ struct inode *dir = ovl_indexdir(dentry->d_sb)->d_inode;
+ struct dentry *lowerdentry = ovl_dentry_lower(dentry);
+ struct dentry *upperdentry = ovl_dentry_upper(dentry);
+ struct dentry *index = NULL;
+ struct inode *inode;
+ struct qstr name;
+ int err;
+
+ err = ovl_get_index_name(lowerdentry, &name);
+ if (err)
+ goto fail;
+
+ inode = d_inode(upperdentry);
+ if (inode->i_nlink != 1) {
+ pr_warn_ratelimited("overlayfs: cleanup linked index (%pd2, ino=%lu, nlink=%u)\n",
+ upperdentry, inode->i_ino, inode->i_nlink);
+ /*
+ * We either have a bug with persistent union nlink or a lower
+ * hardlink was added while overlay is mounted. Adding a lower
+ * hardlink and then unlinking all overlay hardlinks would drop
+ * overlay nlink to zero before all upper inodes are unlinked.
+ * As a safety measure, when that situation is detected, set
+ * the overlay nlink to the index inode nlink minus one for the
+ * index entry itself.
+ */
+ set_nlink(d_inode(dentry), inode->i_nlink - 1);
+ ovl_set_nlink_upper(dentry);
+ goto out;
+ }
+
+ inode_lock_nested(dir, I_MUTEX_PARENT);
+ /* TODO: whiteout instead of cleanup to block future open by handle */
+ index = lookup_one_len(name.name, ovl_indexdir(dentry->d_sb), name.len);
+ err = PTR_ERR(index);
+ if (!IS_ERR(index))
+ err = ovl_cleanup(dir, index);
+ inode_unlock(dir);
+ if (err)
+ goto fail;
+
+out:
+ dput(index);
+ return;
+
+fail:
+ pr_err("overlayfs: cleanup index of '%pd2' failed (%i)\n", dentry, err);
+ goto out;
+}
+
+/*
+ * Operations that change overlay inode and upper inode nlink need to be
+ * synchronized with copy up for persistent nlink accounting.
+ */
+int ovl_nlink_start(struct dentry *dentry, bool *locked)
+{
+ struct ovl_inode *oi = OVL_I(d_inode(dentry));
+ const struct cred *old_cred;
+ int err;
+
+ if (!d_inode(dentry) || d_is_dir(dentry))
+ return 0;
+
+ /*
+ * With inodes index is enabled, we store the union overlay nlink
+ * in an xattr on the index inode. When whiting out lower hardlinks
+ * we need to decrement the overlay persistent nlink, but before the
+ * first copy up, we have no upper index inode to store the xattr.
+ *
+ * As a workaround, before whiteout/rename over of a lower hardlink,
+ * copy up to create the upper index. Creating the upper index will
+ * initialize the overlay nlink, so it could be dropped if unlink
+ * or rename succeeds.
+ *
+ * TODO: implement metadata only index copy up when called with
+ * ovl_copy_up_flags(dentry, O_PATH).
+ */
+ if (ovl_indexdir(dentry->d_sb) && !ovl_dentry_has_upper_alias(dentry) &&
+ d_inode(ovl_dentry_lower(dentry))->i_nlink > 1) {
+ err = ovl_copy_up(dentry);
+ if (err)
+ return err;
+ }
+
+ err = mutex_lock_interruptible(&oi->lock);
+ if (err)
+ return err;
+
+ if (!ovl_test_flag(OVL_INDEX, d_inode(dentry)))
+ goto out;
+
+ old_cred = ovl_override_creds(dentry->d_sb);
+ /*
+ * The overlay inode nlink should be incremented/decremented IFF the
+ * upper operation succeeds, along with nlink change of upper inode.
+ * Therefore, before link/unlink/rename, we store the union nlink
+ * value relative to the upper inode nlink in an upper inode xattr.
+ */
+ err = ovl_set_nlink_upper(dentry);
+ revert_creds(old_cred);
+
+out:
+ if (err)
+ mutex_unlock(&oi->lock);
+ else
+ *locked = true;
+
+ return err;
+}
+
+void ovl_nlink_end(struct dentry *dentry, bool locked)
+{
+ if (locked) {
+ if (ovl_test_flag(OVL_INDEX, d_inode(dentry)) &&
+ d_inode(dentry)->i_nlink == 0) {
+ const struct cred *old_cred;
+
+ old_cred = ovl_override_creds(dentry->d_sb);
+ ovl_cleanup_index(dentry);
+ revert_creds(old_cred);
+ }
+
+ mutex_unlock(&OVL_I(d_inode(dentry))->lock);
+ }
+}
diff --git a/fs/pipe.c b/fs/pipe.c
index 73b84ba..97e5be8 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -739,13 +739,12 @@
struct inode *inode = get_pipe_inode();
struct file *f;
struct path path;
- static struct qstr name = { .name = "" };
if (!inode)
return -ENFILE;
err = -ENOMEM;
- path.dentry = d_alloc_pseudo(pipe_mnt->mnt_sb, &name);
+ path.dentry = d_alloc_pseudo(pipe_mnt->mnt_sb, &empty_name);
if (!path.dentry)
goto err_inode;
path.mnt = mntget(pipe_mnt);
diff --git a/fs/proc/base.c b/fs/proc/base.c
index f1e1927..719c2e9 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -1355,6 +1355,49 @@
.write = proc_fault_inject_write,
.llseek = generic_file_llseek,
};
+
+static ssize_t proc_fail_nth_write(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct task_struct *task;
+ int err;
+ unsigned int n;
+
+ err = kstrtouint_from_user(buf, count, 0, &n);
+ if (err)
+ return err;
+
+ task = get_proc_task(file_inode(file));
+ if (!task)
+ return -ESRCH;
+ WRITE_ONCE(task->fail_nth, n);
+ put_task_struct(task);
+
+ return count;
+}
+
+static ssize_t proc_fail_nth_read(struct file *file, char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct task_struct *task;
+ char numbuf[PROC_NUMBUF];
+ ssize_t len;
+
+ task = get_proc_task(file_inode(file));
+ if (!task)
+ return -ESRCH;
+ len = snprintf(numbuf, sizeof(numbuf), "%u\n",
+ READ_ONCE(task->fail_nth));
+ len = simple_read_from_buffer(buf, count, ppos, numbuf, len);
+ put_task_struct(task);
+
+ return len;
+}
+
+static const struct file_operations proc_fail_nth_operations = {
+ .read = proc_fail_nth_read,
+ .write = proc_fail_nth_write,
+};
#endif
@@ -2919,6 +2962,7 @@
#endif
#ifdef CONFIG_FAULT_INJECTION
REG("make-it-fail", S_IRUGO|S_IWUSR, proc_fault_inject_operations),
+ REG("fail-nth", 0644, proc_fail_nth_operations),
#endif
#ifdef CONFIG_ELF_CORE
REG("coredump_filter", S_IRUGO|S_IWUSR, proc_coredump_filter_operations),
@@ -3311,6 +3355,7 @@
#endif
#ifdef CONFIG_FAULT_INJECTION
REG("make-it-fail", S_IRUGO|S_IWUSR, proc_fault_inject_operations),
+ REG("fail-nth", 0644, proc_fail_nth_operations),
#endif
#ifdef CONFIG_TASK_IO_ACCOUNTING
ONE("io", S_IRUSR, proc_tid_io_accounting),
diff --git a/fs/proc/internal.h b/fs/proc/internal.h
index c5ae09b..aa2b890 100644
--- a/fs/proc/internal.h
+++ b/fs/proc/internal.h
@@ -51,7 +51,7 @@
spinlock_t pde_unload_lock; /* proc_fops checks and pde_users bumps */
u8 namelen;
char name[];
-};
+} __randomize_layout;
union proc_op {
int (*proc_get_link)(struct dentry *, struct path *);
@@ -67,10 +67,10 @@
struct proc_dir_entry *pde;
struct ctl_table_header *sysctl;
struct ctl_table *sysctl_entry;
- struct list_head sysctl_inodes;
+ struct hlist_node sysctl_inodes;
const struct proc_ns_operations *ns_ops;
struct inode vfs_inode;
-};
+} __randomize_layout;
/*
* General functions
@@ -279,7 +279,7 @@
#ifdef CONFIG_NUMA
struct mempolicy *task_mempolicy;
#endif
-};
+} __randomize_layout;
struct mm_struct *proc_mem_open(struct inode *inode, unsigned int mode);
diff --git a/fs/proc/proc_sysctl.c b/fs/proc/proc_sysctl.c
index 67985a7..8f47922 100644
--- a/fs/proc/proc_sysctl.c
+++ b/fs/proc/proc_sysctl.c
@@ -191,7 +191,7 @@
head->set = set;
head->parent = NULL;
head->node = node;
- INIT_LIST_HEAD(&head->inodes);
+ INIT_HLIST_HEAD(&head->inodes);
if (node) {
struct ctl_table *entry;
for (entry = table; entry->procname; entry++, node++)
@@ -261,25 +261,42 @@
complete(p->unregistering);
}
-/* called under sysctl_lock */
static void proc_sys_prune_dcache(struct ctl_table_header *head)
{
- struct inode *inode, *prev = NULL;
+ struct inode *inode;
struct proc_inode *ei;
+ struct hlist_node *node;
+ struct super_block *sb;
rcu_read_lock();
- list_for_each_entry_rcu(ei, &head->inodes, sysctl_inodes) {
- inode = igrab(&ei->vfs_inode);
- if (inode) {
- rcu_read_unlock();
- iput(prev);
- prev = inode;
- d_prune_aliases(inode);
+ for (;;) {
+ node = hlist_first_rcu(&head->inodes);
+ if (!node)
+ break;
+ ei = hlist_entry(node, struct proc_inode, sysctl_inodes);
+ spin_lock(&sysctl_lock);
+ hlist_del_init_rcu(&ei->sysctl_inodes);
+ spin_unlock(&sysctl_lock);
+
+ inode = &ei->vfs_inode;
+ sb = inode->i_sb;
+ if (!atomic_inc_not_zero(&sb->s_active))
+ continue;
+ inode = igrab(inode);
+ rcu_read_unlock();
+ if (unlikely(!inode)) {
+ deactivate_super(sb);
rcu_read_lock();
+ continue;
}
+
+ d_prune_aliases(inode);
+ iput(inode);
+ deactivate_super(sb);
+
+ rcu_read_lock();
}
rcu_read_unlock();
- iput(prev);
}
/* called under sysctl_lock, will reacquire if has to wait */
@@ -461,7 +478,7 @@
}
ei->sysctl = head;
ei->sysctl_entry = table;
- list_add_rcu(&ei->sysctl_inodes, &head->inodes);
+ hlist_add_head_rcu(&ei->sysctl_inodes, &head->inodes);
head->count++;
spin_unlock(&sysctl_lock);
@@ -489,7 +506,7 @@
void proc_sys_evict_inode(struct inode *inode, struct ctl_table_header *head)
{
spin_lock(&sysctl_lock);
- list_del_rcu(&PROC_I(inode)->sysctl_inodes);
+ hlist_del_init_rcu(&PROC_I(inode)->sysctl_inodes);
if (!--head->count)
kfree_rcu(head, rcu);
spin_unlock(&sysctl_lock);
@@ -1061,16 +1078,30 @@
return -EINVAL;
}
+static int sysctl_check_table_array(const char *path, struct ctl_table *table)
+{
+ int err = 0;
+
+ if ((table->proc_handler == proc_douintvec) ||
+ (table->proc_handler == proc_douintvec_minmax)) {
+ if (table->maxlen != sizeof(unsigned int))
+ err |= sysctl_err(path, table, "array now allowed");
+ }
+
+ return err;
+}
+
static int sysctl_check_table(const char *path, struct ctl_table *table)
{
int err = 0;
for (; table->procname; table++) {
if (table->child)
- err = sysctl_err(path, table, "Not a file");
+ err |= sysctl_err(path, table, "Not a file");
if ((table->proc_handler == proc_dostring) ||
(table->proc_handler == proc_dointvec) ||
(table->proc_handler == proc_douintvec) ||
+ (table->proc_handler == proc_douintvec_minmax) ||
(table->proc_handler == proc_dointvec_minmax) ||
(table->proc_handler == proc_dointvec_jiffies) ||
(table->proc_handler == proc_dointvec_userhz_jiffies) ||
@@ -1078,15 +1109,17 @@
(table->proc_handler == proc_doulongvec_minmax) ||
(table->proc_handler == proc_doulongvec_ms_jiffies_minmax)) {
if (!table->data)
- err = sysctl_err(path, table, "No data");
+ err |= sysctl_err(path, table, "No data");
if (!table->maxlen)
- err = sysctl_err(path, table, "No maxlen");
+ err |= sysctl_err(path, table, "No maxlen");
+ else
+ err |= sysctl_check_table_array(path, table);
}
if (!table->proc_handler)
- err = sysctl_err(path, table, "No proc_handler");
+ err |= sysctl_err(path, table, "No proc_handler");
if ((table->mode & (S_IRUGO|S_IWUGO)) != table->mode)
- err = sysctl_err(path, table, "bogus .mode 0%o",
+ err |= sysctl_err(path, table, "bogus .mode 0%o",
table->mode);
}
return err;
diff --git a/fs/pstore/inode.c b/fs/pstore/inode.c
index 4d02c3b..fefd226 100644
--- a/fs/pstore/inode.c
+++ b/fs/pstore/inode.c
@@ -283,6 +283,16 @@
}
}
+/*
+ * Display the mount options in /proc/mounts.
+ */
+static int pstore_show_options(struct seq_file *m, struct dentry *root)
+{
+ if (kmsg_bytes != PSTORE_DEFAULT_KMSG_BYTES)
+ seq_printf(m, ",kmsg_bytes=%lu", kmsg_bytes);
+ return 0;
+}
+
static int pstore_remount(struct super_block *sb, int *flags, char *data)
{
sync_filesystem(sb);
@@ -296,7 +306,7 @@
.drop_inode = generic_delete_inode,
.evict_inode = pstore_evict_inode,
.remount_fs = pstore_remount,
- .show_options = generic_show_options,
+ .show_options = pstore_show_options,
};
static struct super_block *pstore_sb;
@@ -448,8 +458,6 @@
{
struct inode *inode;
- save_mount_options(sb, data);
-
pstore_sb = sb;
sb->s_maxbytes = MAX_LFS_FILESIZE;
diff --git a/fs/pstore/internal.h b/fs/pstore/internal.h
index 5805126..7f4e48c 100644
--- a/fs/pstore/internal.h
+++ b/fs/pstore/internal.h
@@ -5,6 +5,9 @@
#include <linux/time.h>
#include <linux/pstore.h>
+#define PSTORE_DEFAULT_KMSG_BYTES 10240
+extern unsigned long kmsg_bytes;
+
#ifdef CONFIG_PSTORE_FTRACE
extern void pstore_register_ftrace(void);
extern void pstore_unregister_ftrace(void);
diff --git a/fs/pstore/platform.c b/fs/pstore/platform.c
index 1b6e0ff..2b21d18 100644
--- a/fs/pstore/platform.c
+++ b/fs/pstore/platform.c
@@ -99,7 +99,7 @@
static size_t big_oops_buf_sz;
/* How much of the console log to snapshot */
-static unsigned long kmsg_bytes = 10240;
+unsigned long kmsg_bytes = PSTORE_DEFAULT_KMSG_BYTES;
void pstore_set_kmsg_bytes(int bytes)
{
diff --git a/fs/ramfs/inode.c b/fs/ramfs/inode.c
index 26e4586..11201b2 100644
--- a/fs/ramfs/inode.c
+++ b/fs/ramfs/inode.c
@@ -38,6 +38,14 @@
#include <linux/uaccess.h>
#include "internal.h"
+struct ramfs_mount_opts {
+ umode_t mode;
+};
+
+struct ramfs_fs_info {
+ struct ramfs_mount_opts mount_opts;
+};
+
#define RAMFS_DEFAULT_MODE 0755
static const struct super_operations ramfs_ops;
@@ -149,14 +157,22 @@
.rename = simple_rename,
};
+/*
+ * Display the mount options in /proc/mounts.
+ */
+static int ramfs_show_options(struct seq_file *m, struct dentry *root)
+{
+ struct ramfs_fs_info *fsi = root->d_sb->s_fs_info;
+
+ if (fsi->mount_opts.mode != RAMFS_DEFAULT_MODE)
+ seq_printf(m, ",mode=%o", fsi->mount_opts.mode);
+ return 0;
+}
+
static const struct super_operations ramfs_ops = {
.statfs = simple_statfs,
.drop_inode = generic_delete_inode,
- .show_options = generic_show_options,
-};
-
-struct ramfs_mount_opts {
- umode_t mode;
+ .show_options = ramfs_show_options,
};
enum {
@@ -169,10 +185,6 @@
{Opt_err, NULL}
};
-struct ramfs_fs_info {
- struct ramfs_mount_opts mount_opts;
-};
-
static int ramfs_parse_options(char *data, struct ramfs_mount_opts *opts)
{
substring_t args[MAX_OPT_ARGS];
@@ -211,8 +223,6 @@
struct inode *inode;
int err;
- save_mount_options(sb, data);
-
fsi = kzalloc(sizeof(struct ramfs_fs_info), GFP_KERNEL);
sb->s_fs_info = fsi;
if (!fsi)
diff --git a/fs/reiserfs/bitmap.c b/fs/reiserfs/bitmap.c
index dc198bc..edc8ef7 100644
--- a/fs/reiserfs/bitmap.c
+++ b/fs/reiserfs/bitmap.c
@@ -513,9 +513,17 @@
"inode has negative prealloc blocks count.");
#endif
while (ei->i_prealloc_count > 0) {
- reiserfs_free_prealloc_block(th, inode, ei->i_prealloc_block);
- ei->i_prealloc_block++;
+ b_blocknr_t block_to_free;
+
+ /*
+ * reiserfs_free_prealloc_block can drop the write lock,
+ * which could allow another caller to free the same block.
+ * We can protect against it by modifying the prealloc
+ * state before calling it.
+ */
+ block_to_free = ei->i_prealloc_block++;
ei->i_prealloc_count--;
+ reiserfs_free_prealloc_block(th, inode, block_to_free);
dirty = 1;
}
if (dirty)
@@ -1128,7 +1136,7 @@
hint->prealloc_size = 0;
if (!hint->formatted_node && hint->preallocate) {
- if (S_ISREG(hint->inode->i_mode)
+ if (S_ISREG(hint->inode->i_mode) && !IS_PRIVATE(hint->inode)
&& hint->inode->i_size >=
REISERFS_SB(hint->th->t_super)->s_alloc_options.
preallocmin * hint->inode->i_sb->s_blocksize)
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index 685f1e0..306e4e9 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -1599,8 +1599,6 @@
}
out_ok_unlocked:
- if (new_opts)
- replace_mount_options(s, new_opts);
return 0;
out_err_unlock:
@@ -1916,8 +1914,6 @@
char *qf_names[REISERFS_MAXQUOTAS] = {};
unsigned int qfmt = 0;
- save_mount_options(s, data);
-
sbi = kzalloc(sizeof(struct reiserfs_sb_info), GFP_KERNEL);
if (!sbi)
return -ENOMEM;
diff --git a/fs/reiserfs/xattr_acl.c b/fs/reiserfs/xattr_acl.c
index 3d2256a..54415f0 100644
--- a/fs/reiserfs/xattr_acl.c
+++ b/fs/reiserfs/xattr_acl.c
@@ -23,7 +23,8 @@
struct reiserfs_transaction_handle th;
size_t jcreate_blocks;
int size = acl ? posix_acl_xattr_size(acl->a_count) : 0;
-
+ int update_mode = 0;
+ umode_t mode = inode->i_mode;
/*
* Pessimism: We can't assume that anything from the xattr root up
@@ -37,7 +38,16 @@
error = journal_begin(&th, inode->i_sb, jcreate_blocks);
reiserfs_write_unlock(inode->i_sb);
if (error == 0) {
+ if (type == ACL_TYPE_ACCESS && acl) {
+ error = posix_acl_update_mode(inode, &mode, &acl);
+ if (error)
+ goto unlock;
+ update_mode = 1;
+ }
error = __reiserfs_set_acl(&th, inode, type, acl);
+ if (!error && update_mode)
+ inode->i_mode = mode;
+unlock:
reiserfs_write_lock(inode->i_sb);
error2 = journal_end(&th);
reiserfs_write_unlock(inode->i_sb);
@@ -241,11 +251,6 @@
switch (type) {
case ACL_TYPE_ACCESS:
name = XATTR_NAME_POSIX_ACL_ACCESS;
- if (acl) {
- error = posix_acl_update_mode(inode, &inode->i_mode, &acl);
- if (error)
- return error;
- }
break;
case ACL_TYPE_DEFAULT:
name = XATTR_NAME_POSIX_ACL_DEFAULT;
diff --git a/fs/super.c b/fs/super.c
index adb0c0d..6bc3352 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -168,7 +168,6 @@
WARN_ON(!list_empty(&s->s_mounts));
put_user_ns(s->s_user_ns);
kfree(s->s_subtype);
- kfree(s->s_options);
call_rcu(&s->rcu, destroy_super_rcu);
}
@@ -508,7 +507,7 @@
return ERR_PTR(-ENOMEM);
goto retry;
}
-
+
err = set(s, data);
if (err) {
spin_unlock(&sb_lock);
@@ -771,7 +770,7 @@
spin_unlock(&sb_lock);
return NULL;
}
-
+
struct super_block *user_get_super(dev_t dev)
{
struct super_block *sb;
diff --git a/fs/tracefs/inode.c b/fs/tracefs/inode.c
index 328e89c..bea8ad8 100644
--- a/fs/tracefs/inode.c
+++ b/fs/tracefs/inode.c
@@ -270,8 +270,6 @@
struct tracefs_fs_info *fsi;
int err;
- save_mount_options(sb, data);
-
fsi = kzalloc(sizeof(struct tracefs_fs_info), GFP_KERNEL);
sb->s_fs_info = fsi;
if (!fsi) {
diff --git a/fs/ubifs/crypto.c b/fs/ubifs/crypto.c
index 382ed42..114ba45 100644
--- a/fs/ubifs/crypto.c
+++ b/fs/ubifs/crypto.c
@@ -9,8 +9,13 @@
static int ubifs_crypt_set_context(struct inode *inode, const void *ctx,
size_t len, void *fs_data)
{
+ /*
+ * Creating an encryption context is done unlocked since we
+ * operate on a new inode which is not visible to other users
+ * at this point. So, no need to check whether inode is locked.
+ */
return ubifs_xattr_set(inode, UBIFS_XATTR_NAME_ENCRYPTION_CONTEXT,
- ctx, len, 0);
+ ctx, len, 0, false);
}
static bool ubifs_crypt_empty_dir(struct inode *inode)
diff --git a/fs/ubifs/dir.c b/fs/ubifs/dir.c
index 566079d..417fe0b 100644
--- a/fs/ubifs/dir.c
+++ b/fs/ubifs/dir.c
@@ -143,6 +143,7 @@
case S_IFBLK:
case S_IFCHR:
inode->i_op = &ubifs_file_inode_operations;
+ encrypted = false;
break;
default:
BUG();
@@ -1061,7 +1062,6 @@
int sz_change;
int err, devlen = 0;
struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1,
- .new_ino_d = ALIGN(devlen, 8),
.dirtied_ino = 1 };
struct fscrypt_name nm;
@@ -1079,6 +1079,7 @@
devlen = ubifs_encode_dev(dev, rdev);
}
+ req.new_ino_d = ALIGN(devlen, 8);
err = ubifs_budget_space(c, &req);
if (err) {
kfree(dev);
@@ -1396,17 +1397,14 @@
dev = kmalloc(sizeof(union ubifs_dev_desc), GFP_NOFS);
if (!dev) {
- ubifs_release_budget(c, &req);
- ubifs_release_budget(c, &ino_req);
- return -ENOMEM;
+ err = -ENOMEM;
+ goto out_release;
}
err = do_tmpfile(old_dir, old_dentry, S_IFCHR | WHITEOUT_MODE, &whiteout);
if (err) {
- ubifs_release_budget(c, &req);
- ubifs_release_budget(c, &ino_req);
kfree(dev);
- return err;
+ goto out_release;
}
whiteout->i_state |= I_LINKABLE;
@@ -1494,12 +1492,10 @@
err = ubifs_budget_space(c, &wht_req);
if (err) {
- ubifs_release_budget(c, &req);
- ubifs_release_budget(c, &ino_req);
kfree(whiteout_ui->data);
whiteout_ui->data_len = 0;
iput(whiteout);
- return err;
+ goto out_release;
}
inc_nlink(whiteout);
@@ -1554,6 +1550,7 @@
iput(whiteout);
}
unlock_4_inodes(old_dir, new_dir, new_inode, whiteout);
+out_release:
ubifs_release_budget(c, &ino_req);
ubifs_release_budget(c, &req);
fscrypt_free_filename(&old_nm);
@@ -1647,6 +1644,21 @@
struct ubifs_inode *ui = ubifs_inode(inode);
mutex_lock(&ui->ui_mutex);
+
+ if (ui->flags & UBIFS_APPEND_FL)
+ stat->attributes |= STATX_ATTR_APPEND;
+ if (ui->flags & UBIFS_COMPR_FL)
+ stat->attributes |= STATX_ATTR_COMPRESSED;
+ if (ui->flags & UBIFS_CRYPT_FL)
+ stat->attributes |= STATX_ATTR_ENCRYPTED;
+ if (ui->flags & UBIFS_IMMUTABLE_FL)
+ stat->attributes |= STATX_ATTR_IMMUTABLE;
+
+ stat->attributes_mask |= (STATX_ATTR_APPEND |
+ STATX_ATTR_COMPRESSED |
+ STATX_ATTR_ENCRYPTED |
+ STATX_ATTR_IMMUTABLE);
+
generic_fillattr(inode, stat);
stat->blksize = UBIFS_BLOCK_SIZE;
stat->size = ui->ui_size;
diff --git a/fs/ubifs/file.c b/fs/ubifs/file.c
index 2cda3d6..8cad0b1 100644
--- a/fs/ubifs/file.c
+++ b/fs/ubifs/file.c
@@ -735,6 +735,7 @@
int err, page_idx, page_cnt, ret = 0, n = 0;
int allocate = bu->buf ? 0 : 1;
loff_t isize;
+ gfp_t ra_gfp_mask = readahead_gfp_mask(mapping) & ~__GFP_FS;
err = ubifs_tnc_get_bu_keys(c, bu);
if (err)
@@ -796,8 +797,7 @@
if (page_offset > end_index)
break;
- page = find_or_create_page(mapping, page_offset,
- GFP_NOFS | __GFP_COLD);
+ page = find_or_create_page(mapping, page_offset, ra_gfp_mask);
if (!page)
break;
if (!PageUptodate(page))
@@ -1284,6 +1284,14 @@
if (err)
return err;
+ if (ubifs_crypt_is_encrypted(inode) && (attr->ia_valid & ATTR_SIZE)) {
+ err = fscrypt_get_encryption_info(inode);
+ if (err)
+ return err;
+ if (!fscrypt_has_encryption_key(inode))
+ return -ENOKEY;
+ }
+
if ((attr->ia_valid & ATTR_SIZE) && attr->ia_size < inode->i_size)
/* Truncation to a smaller size */
err = do_truncation(c, inode, attr);
@@ -1607,15 +1615,6 @@
static int ubifs_file_mmap(struct file *file, struct vm_area_struct *vma)
{
int err;
- struct inode *inode = file->f_mapping->host;
-
- if (ubifs_crypt_is_encrypted(inode)) {
- err = fscrypt_get_encryption_info(inode);
- if (err)
- return -EACCES;
- if (!fscrypt_has_encryption_key(inode))
- return -ENOKEY;
- }
err = generic_file_mmap(file, vma);
if (err)
@@ -1698,12 +1697,6 @@
pstr.name[pstr.len] = '\0';
- // XXX this probably won't happen anymore...
- if (pstr.name[0] == '\0') {
- fscrypt_fname_free_buffer(&pstr);
- return ERR_PTR(-ENOENT);
- }
-
set_delayed_call(done, kfree_link, pstr.name);
return pstr.name;
}
diff --git a/fs/ubifs/journal.c b/fs/ubifs/journal.c
index 294519b..04c4ec6 100644
--- a/fs/ubifs/journal.c
+++ b/fs/ubifs/journal.c
@@ -549,8 +549,6 @@
struct ubifs_ino_node *ino;
union ubifs_key dent_key, ino_key;
- //dbg_jnl("ino %lu, dent '%.*s', data len %d in dir ino %lu",
- // inode->i_ino, nm->len, nm->name, ui->data_len, dir->i_ino);
ubifs_assert(mutex_is_locked(&host_ui->ui_mutex));
dlen = UBIFS_DENT_NODE_SZ + fname_len(nm) + 1;
@@ -574,7 +572,7 @@
/* Make sure to also account for extended attributes */
len += host_ui->data_len;
- dent = kmalloc(len, GFP_NOFS);
+ dent = kzalloc(len, GFP_NOFS);
if (!dent)
return -ENOMEM;
@@ -585,7 +583,10 @@
if (!xent) {
dent->ch.node_type = UBIFS_DENT_NODE;
- dent_key_init(c, &dent_key, dir->i_ino, nm);
+ if (nm->hash)
+ dent_key_init_hash(c, &dent_key, dir->i_ino, nm->hash);
+ else
+ dent_key_init(c, &dent_key, dir->i_ino, nm);
} else {
dent->ch.node_type = UBIFS_XENT_NODE;
xent_key_init(c, &dent_key, dir->i_ino, nm);
@@ -629,7 +630,10 @@
kfree(dent);
if (deletion) {
- err = ubifs_tnc_remove_nm(c, &dent_key, nm);
+ if (nm->hash)
+ err = ubifs_tnc_remove_dh(c, &dent_key, nm->minor_hash);
+ else
+ err = ubifs_tnc_remove_nm(c, &dent_key, nm);
if (err)
goto out_ro;
err = ubifs_add_dirt(c, lnum, dlen);
@@ -950,9 +954,6 @@
int twoparents = (fst_dir != snd_dir);
void *p;
- //dbg_jnl("dent '%pd' in dir ino %lu between dent '%pd' in dir ino %lu",
- // fst_dentry, fst_dir->i_ino, snd_dentry, snd_dir->i_ino);
-
ubifs_assert(ubifs_inode(fst_dir)->data_len == 0);
ubifs_assert(ubifs_inode(snd_dir)->data_len == 0);
ubifs_assert(mutex_is_locked(&ubifs_inode(fst_dir)->ui_mutex));
@@ -967,7 +968,7 @@
if (twoparents)
len += plen;
- dent1 = kmalloc(len, GFP_NOFS);
+ dent1 = kzalloc(len, GFP_NOFS);
if (!dent1)
return -ENOMEM;
@@ -984,6 +985,7 @@
dent1->nlen = cpu_to_le16(fname_len(snd_nm));
memcpy(dent1->name, fname_name(snd_nm), fname_len(snd_nm));
dent1->name[fname_len(snd_nm)] = '\0';
+ set_dent_cookie(c, dent1);
zero_dent_node_unused(dent1);
ubifs_prep_grp_node(c, dent1, dlen1, 0);
@@ -996,6 +998,7 @@
dent2->nlen = cpu_to_le16(fname_len(fst_nm));
memcpy(dent2->name, fname_name(fst_nm), fname_len(fst_nm));
dent2->name[fname_len(fst_nm)] = '\0';
+ set_dent_cookie(c, dent2);
zero_dent_node_unused(dent2);
ubifs_prep_grp_node(c, dent2, dlen2, 0);
@@ -1094,8 +1097,6 @@
int move = (old_dir != new_dir);
struct ubifs_inode *uninitialized_var(new_ui);
- //dbg_jnl("dent '%pd' in dir ino %lu to dent '%pd' in dir ino %lu",
- // old_dentry, old_dir->i_ino, new_dentry, new_dir->i_ino);
ubifs_assert(ubifs_inode(old_dir)->data_len == 0);
ubifs_assert(ubifs_inode(new_dir)->data_len == 0);
ubifs_assert(mutex_is_locked(&ubifs_inode(old_dir)->ui_mutex));
@@ -1117,7 +1118,7 @@
len = aligned_dlen1 + aligned_dlen2 + ALIGN(ilen, 8) + ALIGN(plen, 8);
if (move)
len += plen;
- dent = kmalloc(len, GFP_NOFS);
+ dent = kzalloc(len, GFP_NOFS);
if (!dent)
return -ENOMEM;
@@ -1298,7 +1299,9 @@
goto out;
}
- if (compr_type != UBIFS_COMPR_NONE) {
+ if (compr_type == UBIFS_COMPR_NONE) {
+ out_len = *new_len;
+ } else {
err = ubifs_decompress(c, &dn->data, dlen, buf, &out_len, compr_type);
if (err)
goto out;
@@ -1485,9 +1488,6 @@
int sync = IS_DIRSYNC(host);
struct ubifs_inode *host_ui = ubifs_inode(host);
- //dbg_jnl("host %lu, xattr ino %lu, name '%s', data len %d",
- // host->i_ino, inode->i_ino, nm->name,
- // ubifs_inode(inode)->data_len);
ubifs_assert(inode->i_nlink == 0);
ubifs_assert(mutex_is_locked(&host_ui->ui_mutex));
@@ -1500,7 +1500,7 @@
hlen = host_ui->data_len + UBIFS_INO_NODE_SZ;
len = aligned_xlen + UBIFS_INO_NODE_SZ + ALIGN(hlen, 8);
- xent = kmalloc(len, GFP_NOFS);
+ xent = kzalloc(len, GFP_NOFS);
if (!xent)
return -ENOMEM;
@@ -1607,7 +1607,7 @@
aligned_len1 = ALIGN(len1, 8);
aligned_len = aligned_len1 + ALIGN(len2, 8);
- ino = kmalloc(aligned_len, GFP_NOFS);
+ ino = kzalloc(aligned_len, GFP_NOFS);
if (!ino)
return -ENOMEM;
diff --git a/fs/ubifs/key.h b/fs/ubifs/key.h
index 7547be5..b1f7c0c 100644
--- a/fs/ubifs/key.h
+++ b/fs/ubifs/key.h
@@ -162,6 +162,7 @@
uint32_t hash = c->key_hash(fname_name(nm), fname_len(nm));
ubifs_assert(!(hash & ~UBIFS_S_KEY_HASH_MASK));
+ ubifs_assert(!nm->hash && !nm->minor_hash);
key->u32[0] = inum;
key->u32[1] = hash | (UBIFS_DENT_KEY << UBIFS_S_KEY_HASH_BITS);
}
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index cf4cc99..bffadbb 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -45,7 +45,7 @@
#define UBIFS_KMALLOC_OK (128*1024)
/* Slab cache for UBIFS inodes */
-struct kmem_cache *ubifs_inode_slab;
+static struct kmem_cache *ubifs_inode_slab;
/* UBIFS TNC shrinker description */
static struct shrinker ubifs_shrinker_info = {
@@ -446,6 +446,8 @@
ubifs_compr_name(c->mount_opts.compr_type));
}
+ seq_printf(s, ",ubi=%d,vol=%d", c->vi.ubi_num, c->vi.vol_id);
+
return 0;
}
@@ -931,6 +933,7 @@
Opt_chk_data_crc,
Opt_no_chk_data_crc,
Opt_override_compr,
+ Opt_ignore,
Opt_err,
};
@@ -942,6 +945,8 @@
{Opt_chk_data_crc, "chk_data_crc"},
{Opt_no_chk_data_crc, "no_chk_data_crc"},
{Opt_override_compr, "compr=%s"},
+ {Opt_ignore, "ubi=%s"},
+ {Opt_ignore, "vol=%s"},
{Opt_err, NULL},
};
@@ -1042,6 +1047,8 @@
c->default_compr = c->mount_opts.compr_type;
break;
}
+ case Opt_ignore:
+ break;
default:
{
unsigned long flag;
@@ -1869,8 +1876,10 @@
bu_init(c);
else {
dbg_gen("disable bulk-read");
+ mutex_lock(&c->bu_mutex);
kfree(c->bu.buf);
c->bu.buf = NULL;
+ mutex_unlock(&c->bu_mutex);
}
ubifs_assert(c->lst.taken_empty_lebs > 0);
diff --git a/fs/ubifs/tnc.c b/fs/ubifs/tnc.c
index 709aa09..0a213dc 100644
--- a/fs/ubifs/tnc.c
+++ b/fs/ubifs/tnc.c
@@ -1812,7 +1812,7 @@
int found, n, err;
struct ubifs_znode *znode;
- //dbg_tnck(key, "name '%.*s' key ", nm->len, nm->name);
+ dbg_tnck(key, "key ");
mutex_lock(&c->tnc_mutex);
found = ubifs_lookup_level0(c, key, &znode, &n);
if (!found) {
@@ -1880,13 +1880,53 @@
return do_lookup_nm(c, key, node, nm);
}
+static int search_dh_cookie(struct ubifs_info *c, const union ubifs_key *key,
+ struct ubifs_dent_node *dent, uint32_t cookie,
+ struct ubifs_znode **zn, int *n)
+{
+ int err;
+ struct ubifs_znode *znode = *zn;
+ struct ubifs_zbranch *zbr;
+ union ubifs_key *dkey;
+
+ for (;;) {
+ if (!err) {
+ err = tnc_next(c, &znode, n);
+ if (err)
+ goto out;
+ }
+
+ zbr = &znode->zbranch[*n];
+ dkey = &zbr->key;
+
+ if (key_inum(c, dkey) != key_inum(c, key) ||
+ key_type(c, dkey) != key_type(c, key)) {
+ err = -ENOENT;
+ goto out;
+ }
+
+ err = tnc_read_hashed_node(c, zbr, dent);
+ if (err)
+ goto out;
+
+ if (key_hash(c, key) == key_hash(c, dkey) &&
+ le32_to_cpu(dent->cookie) == cookie) {
+ *zn = znode;
+ goto out;
+ }
+ }
+
+out:
+
+ return err;
+}
+
static int do_lookup_dh(struct ubifs_info *c, const union ubifs_key *key,
struct ubifs_dent_node *dent, uint32_t cookie)
{
- int n, err, type = key_type(c, key);
+ int n, err;
struct ubifs_znode *znode;
- struct ubifs_zbranch *zbr;
- union ubifs_key *dkey, start_key;
+ union ubifs_key start_key;
ubifs_assert(is_hash_key(c, key));
@@ -1897,30 +1937,7 @@
if (unlikely(err < 0))
goto out_unlock;
- for (;;) {
- if (!err) {
- err = tnc_next(c, &znode, &n);
- if (err)
- goto out_unlock;
- }
-
- zbr = &znode->zbranch[n];
- dkey = &zbr->key;
-
- if (key_inum(c, dkey) != key_inum(c, key) ||
- key_type(c, dkey) != type) {
- err = -ENOENT;
- goto out_unlock;
- }
-
- err = tnc_read_hashed_node(c, zbr, dent);
- if (err)
- goto out_unlock;
-
- if (key_hash(c, key) == key_hash(c, dkey) &&
- le32_to_cpu(dent->cookie) == cookie)
- goto out_unlock;
- }
+ err = search_dh_cookie(c, key, dent, cookie, &znode, &n);
out_unlock:
mutex_unlock(&c->tnc_mutex);
@@ -2393,8 +2410,7 @@
struct ubifs_znode *znode;
mutex_lock(&c->tnc_mutex);
- //dbg_tnck(key, "LEB %d:%d, name '%.*s', key ",
- // lnum, offs, nm->len, nm->name);
+ dbg_tnck(key, "LEB %d:%d, key ", lnum, offs);
found = lookup_level0_dirty(c, key, &znode, &n);
if (found < 0) {
err = found;
@@ -2628,7 +2644,7 @@
struct ubifs_znode *znode;
mutex_lock(&c->tnc_mutex);
- //dbg_tnck(key, "%.*s, key ", nm->len, nm->name);
+ dbg_tnck(key, "key ");
err = lookup_level0_dirty(c, key, &znode, &n);
if (err < 0)
goto out_unlock;
@@ -2663,6 +2679,74 @@
}
/**
+ * ubifs_tnc_remove_dh - remove an index entry for a "double hashed" node.
+ * @c: UBIFS file-system description object
+ * @key: key of node
+ * @cookie: node cookie for collision resolution
+ *
+ * Returns %0 on success or negative error code on failure.
+ */
+int ubifs_tnc_remove_dh(struct ubifs_info *c, const union ubifs_key *key,
+ uint32_t cookie)
+{
+ int n, err;
+ struct ubifs_znode *znode;
+ struct ubifs_dent_node *dent;
+ struct ubifs_zbranch *zbr;
+
+ if (!c->double_hash)
+ return -EOPNOTSUPP;
+
+ mutex_lock(&c->tnc_mutex);
+ err = lookup_level0_dirty(c, key, &znode, &n);
+ if (err <= 0)
+ goto out_unlock;
+
+ zbr = &znode->zbranch[n];
+ dent = kmalloc(UBIFS_MAX_DENT_NODE_SZ, GFP_NOFS);
+ if (!dent) {
+ err = -ENOMEM;
+ goto out_unlock;
+ }
+
+ err = tnc_read_hashed_node(c, zbr, dent);
+ if (err)
+ goto out_free;
+
+ /* If the cookie does not match, we're facing a hash collision. */
+ if (le32_to_cpu(dent->cookie) != cookie) {
+ union ubifs_key start_key;
+
+ lowest_dent_key(c, &start_key, key_inum(c, key));
+
+ err = ubifs_lookup_level0(c, &start_key, &znode, &n);
+ if (unlikely(err < 0))
+ goto out_free;
+
+ err = search_dh_cookie(c, key, dent, cookie, &znode, &n);
+ if (err)
+ goto out_free;
+ }
+
+ if (znode->cnext || !ubifs_zn_dirty(znode)) {
+ znode = dirty_cow_bottom_up(c, znode);
+ if (IS_ERR(znode)) {
+ err = PTR_ERR(znode);
+ goto out_free;
+ }
+ }
+ err = tnc_delete(c, znode, n);
+
+out_free:
+ kfree(dent);
+out_unlock:
+ if (!err)
+ err = dbg_check_tnc(c, 0);
+ mutex_unlock(&c->tnc_mutex);
+ return err;
+}
+
+/**
* key_in_range - determine if a key falls within a range of keys.
* @c: UBIFS file-system description object
* @key: key to check
@@ -2802,6 +2886,8 @@
dbg_tnc("xent '%s', ino %lu", xent->name,
(unsigned long)xattr_inum);
+ ubifs_evict_xattr_inode(c, xattr_inum);
+
fname_name(&nm) = xent->name;
fname_len(&nm) = le16_to_cpu(xent->nlen);
err = ubifs_tnc_remove_nm(c, &key1, &nm);
@@ -2863,7 +2949,7 @@
struct ubifs_zbranch *zbr;
union ubifs_key *dkey;
- //dbg_tnck(key, "%s ", nm->name ? (char *)nm->name : "(lowest)");
+ dbg_tnck(key, "key ");
ubifs_assert(is_hash_key(c, key));
mutex_lock(&c->tnc_mutex);
diff --git a/fs/ubifs/tnc_commit.c b/fs/ubifs/tnc_commit.c
index 51157da..aa31f60 100644
--- a/fs/ubifs/tnc_commit.c
+++ b/fs/ubifs/tnc_commit.c
@@ -57,6 +57,8 @@
ubifs_dump_znode(c, znode);
if (zbr->znode)
ubifs_dump_znode(c, zbr->znode);
+
+ return -EINVAL;
}
}
ubifs_prepare_node(c, idx, len, 0);
@@ -859,6 +861,8 @@
ubifs_dump_znode(c, znode);
if (zbr->znode)
ubifs_dump_znode(c, zbr->znode);
+
+ return -EINVAL;
}
}
len = ubifs_idx_node_sz(c, znode->child_cnt);
diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h
index 298b4d8..cd43651 100644
--- a/fs/ubifs/ubifs.h
+++ b/fs/ubifs/ubifs.h
@@ -1451,7 +1451,6 @@
extern struct list_head ubifs_infos;
extern spinlock_t ubifs_infos_lock;
extern atomic_long_t ubifs_clean_zn_cnt;
-extern struct kmem_cache *ubifs_inode_slab;
extern const struct super_operations ubifs_super_operations;
extern const struct address_space_operations ubifs_file_address_operations;
extern const struct file_operations ubifs_file_operations;
@@ -1590,6 +1589,8 @@
int ubifs_tnc_remove(struct ubifs_info *c, const union ubifs_key *key);
int ubifs_tnc_remove_nm(struct ubifs_info *c, const union ubifs_key *key,
const struct fscrypt_name *nm);
+int ubifs_tnc_remove_dh(struct ubifs_info *c, const union ubifs_key *key,
+ uint32_t cookie);
int ubifs_tnc_remove_range(struct ubifs_info *c, union ubifs_key *from_key,
union ubifs_key *to_key);
int ubifs_tnc_remove_ino(struct ubifs_info *c, ino_t inum);
@@ -1754,9 +1755,10 @@
extern const struct xattr_handler *ubifs_xattr_handlers[];
ssize_t ubifs_listxattr(struct dentry *dentry, char *buffer, size_t size);
int ubifs_xattr_set(struct inode *host, const char *name, const void *value,
- size_t size, int flags);
+ size_t size, int flags, bool check_lock);
ssize_t ubifs_xattr_get(struct inode *host, const char *name, void *buf,
size_t size);
+void ubifs_evict_xattr_inode(struct ubifs_info *c, ino_t xattr_inum);
#ifdef CONFIG_UBIFS_FS_SECURITY
extern int ubifs_init_security(struct inode *dentry, struct inode *inode,
diff --git a/fs/ubifs/xattr.c b/fs/ubifs/xattr.c
index 6c9e62c..c13eae8 100644
--- a/fs/ubifs/xattr.c
+++ b/fs/ubifs/xattr.c
@@ -280,7 +280,7 @@
}
int ubifs_xattr_set(struct inode *host, const char *name, const void *value,
- size_t size, int flags)
+ size_t size, int flags, bool check_lock)
{
struct inode *inode;
struct ubifs_info *c = host->i_sb->s_fs_info;
@@ -289,12 +289,7 @@
union ubifs_key key;
int err;
- /*
- * Creating an encryption context is done unlocked since we
- * operate on a new inode which is not visible to other users
- * at this point.
- */
- if (strcmp(name, UBIFS_XATTR_NAME_ENCRYPTION_CONTEXT) != 0)
+ if (check_lock)
ubifs_assert(inode_is_locked(host));
if (size > UBIFS_MAX_INO_DATA)
@@ -513,6 +508,28 @@
return err;
}
+/**
+ * ubifs_evict_xattr_inode - Evict an xattr inode.
+ * @c: UBIFS file-system description object
+ * @xattr_inum: xattr inode number
+ *
+ * When an inode that hosts xattrs is being removed we have to make sure
+ * that cached inodes of the xattrs also get removed from the inode cache
+ * otherwise we'd waste memory. This function looks up an inode from the
+ * inode cache and clears the link counter such that iput() will evict
+ * the inode.
+ */
+void ubifs_evict_xattr_inode(struct ubifs_info *c, ino_t xattr_inum)
+{
+ struct inode *inode;
+
+ inode = ilookup(c->vfs_sb, xattr_inum);
+ if (inode) {
+ clear_nlink(inode);
+ iput(inode);
+ }
+}
+
static int ubifs_xattr_remove(struct inode *host, const char *name)
{
struct inode *inode;
@@ -576,8 +593,12 @@
}
strcpy(name, XATTR_SECURITY_PREFIX);
strcpy(name + XATTR_SECURITY_PREFIX_LEN, xattr->name);
+ /*
+ * creating a new inode without holding the inode rwsem,
+ * no need to check whether inode is locked.
+ */
err = ubifs_xattr_set(inode, name, xattr->value,
- xattr->value_len, 0);
+ xattr->value_len, 0, false);
kfree(name);
if (err < 0)
break;
@@ -624,7 +645,7 @@
name = xattr_full_name(handler, name);
if (value)
- return ubifs_xattr_set(inode, name, value, size, flags);
+ return ubifs_xattr_set(inode, name, value, size, flags, true);
else
return ubifs_xattr_remove(inode, name);
}
diff --git a/fs/udf/file.c b/fs/udf/file.c
index f5eb2d5..356c2bf 100644
--- a/fs/udf/file.c
+++ b/fs/udf/file.c
@@ -43,10 +43,15 @@
struct inode *inode = page->mapping->host;
char *kaddr;
struct udf_inode_info *iinfo = UDF_I(inode);
+ loff_t isize = i_size_read(inode);
+ /*
+ * We have to be careful here as truncate can change i_size under us.
+ * So just sample it once and use the same value everywhere.
+ */
kaddr = kmap_atomic(page);
- memcpy(kaddr, iinfo->i_ext.i_data + iinfo->i_lenEAttr, inode->i_size);
- memset(kaddr + inode->i_size, 0, PAGE_SIZE - inode->i_size);
+ memcpy(kaddr, iinfo->i_ext.i_data + iinfo->i_lenEAttr, isize);
+ memset(kaddr + isize, 0, PAGE_SIZE - isize);
flush_dcache_page(page);
SetPageUptodate(page);
kunmap_atomic(kaddr);
@@ -71,7 +76,8 @@
BUG_ON(!PageLocked(page));
kaddr = kmap_atomic(page);
- memcpy(iinfo->i_ext.i_data + iinfo->i_lenEAttr, kaddr, inode->i_size);
+ memcpy(iinfo->i_ext.i_data + iinfo->i_lenEAttr, kaddr,
+ i_size_read(inode));
SetPageUptodate(page);
kunmap_atomic(kaddr);
mark_inode_dirty(inode);
diff --git a/fs/udf/inode.c b/fs/udf/inode.c
index 98c510e..18fdb9d 100644
--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -1222,8 +1222,8 @@
return err;
}
set_size:
- truncate_setsize(inode, newsize);
up_write(&iinfo->i_data_sem);
+ truncate_setsize(inode, newsize);
} else {
if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB) {
down_write(&iinfo->i_data_sem);
@@ -1240,9 +1240,9 @@
udf_get_block);
if (err)
return err;
+ truncate_setsize(inode, newsize);
down_write(&iinfo->i_data_sem);
udf_clear_extent_cache(inode);
- truncate_setsize(inode, newsize);
udf_truncate_extents(inode);
up_write(&iinfo->i_data_sem);
}
diff --git a/fs/udf/super.c b/fs/udf/super.c
index 14b4bc1..462ac2e 100644
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -73,8 +73,6 @@
#define VDS_POS_TERMINATING_DESC 6
#define VDS_POS_LENGTH 7
-#define UDF_DEFAULT_BLOCKSIZE 2048
-
#define VSD_FIRST_SECTOR_OFFSET 32768
#define VSD_MAX_SECTOR_OFFSET 0x800000
diff --git a/fs/udf/udftime.c b/fs/udf/udftime.c
index 77c331f..14626b3 100644
--- a/fs/udf/udftime.c
+++ b/fs/udf/udftime.c
@@ -38,56 +38,11 @@
#include <linux/types.h>
#include <linux/kernel.h>
-
-#define EPOCH_YEAR 1970
-
-#ifndef __isleap
-/* Nonzero if YEAR is a leap year (every 4 years,
- except every 100th isn't, and every 400th is). */
-#define __isleap(year) \
- ((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0))
-#endif
-
-/* How many days come before each month (0-12). */
-static const unsigned short int __mon_yday[2][13] = {
- /* Normal years. */
- {0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334, 365},
- /* Leap years. */
- {0, 31, 60, 91, 121, 152, 182, 213, 244, 274, 305, 335, 366}
-};
-
-#define MAX_YEAR_SECONDS 69
-#define SPD 0x15180 /*3600*24 */
-#define SPY(y, l, s) (SPD * (365 * y + l) + s)
-
-static time_t year_seconds[MAX_YEAR_SECONDS] = {
-/*1970*/ SPY(0, 0, 0), SPY(1, 0, 0), SPY(2, 0, 0), SPY(3, 1, 0),
-/*1974*/ SPY(4, 1, 0), SPY(5, 1, 0), SPY(6, 1, 0), SPY(7, 2, 0),
-/*1978*/ SPY(8, 2, 0), SPY(9, 2, 0), SPY(10, 2, 0), SPY(11, 3, 0),
-/*1982*/ SPY(12, 3, 0), SPY(13, 3, 0), SPY(14, 3, 0), SPY(15, 4, 0),
-/*1986*/ SPY(16, 4, 0), SPY(17, 4, 0), SPY(18, 4, 0), SPY(19, 5, 0),
-/*1990*/ SPY(20, 5, 0), SPY(21, 5, 0), SPY(22, 5, 0), SPY(23, 6, 0),
-/*1994*/ SPY(24, 6, 0), SPY(25, 6, 0), SPY(26, 6, 0), SPY(27, 7, 0),
-/*1998*/ SPY(28, 7, 0), SPY(29, 7, 0), SPY(30, 7, 0), SPY(31, 8, 0),
-/*2002*/ SPY(32, 8, 0), SPY(33, 8, 0), SPY(34, 8, 0), SPY(35, 9, 0),
-/*2006*/ SPY(36, 9, 0), SPY(37, 9, 0), SPY(38, 9, 0), SPY(39, 10, 0),
-/*2010*/ SPY(40, 10, 0), SPY(41, 10, 0), SPY(42, 10, 0), SPY(43, 11, 0),
-/*2014*/ SPY(44, 11, 0), SPY(45, 11, 0), SPY(46, 11, 0), SPY(47, 12, 0),
-/*2018*/ SPY(48, 12, 0), SPY(49, 12, 0), SPY(50, 12, 0), SPY(51, 13, 0),
-/*2022*/ SPY(52, 13, 0), SPY(53, 13, 0), SPY(54, 13, 0), SPY(55, 14, 0),
-/*2026*/ SPY(56, 14, 0), SPY(57, 14, 0), SPY(58, 14, 0), SPY(59, 15, 0),
-/*2030*/ SPY(60, 15, 0), SPY(61, 15, 0), SPY(62, 15, 0), SPY(63, 16, 0),
-/*2034*/ SPY(64, 16, 0), SPY(65, 16, 0), SPY(66, 16, 0), SPY(67, 17, 0),
-/*2038*/ SPY(68, 17, 0)
-};
-
-#define SECS_PER_HOUR (60 * 60)
-#define SECS_PER_DAY (SECS_PER_HOUR * 24)
+#include <linux/time.h>
struct timespec *
udf_disk_stamp_to_time(struct timespec *dest, struct timestamp src)
{
- int yday;
u16 typeAndTimezone = le16_to_cpu(src.typeAndTimezone);
u16 year = le16_to_cpu(src.year);
uint8_t type = typeAndTimezone >> 12;
@@ -102,15 +57,9 @@
} else
offset = 0;
- if ((year < EPOCH_YEAR) ||
- (year >= EPOCH_YEAR + MAX_YEAR_SECONDS)) {
- return NULL;
- }
- dest->tv_sec = year_seconds[year - EPOCH_YEAR];
+ dest->tv_sec = mktime64(year, src.month, src.day, src.hour, src.minute,
+ src.second);
dest->tv_sec -= offset * 60;
-
- yday = ((__mon_yday[__isleap(year)][src.month - 1]) + src.day - 1);
- dest->tv_sec += (((yday * 24) + src.hour) * 60 + src.minute) * 60 + src.second;
dest->tv_nsec = 1000 * (src.centiseconds * 10000 +
src.hundredsOfMicroseconds * 100 + src.microseconds);
return dest;
@@ -119,9 +68,9 @@
struct timestamp *
udf_time_to_disk_stamp(struct timestamp *dest, struct timespec ts)
{
- long int days, rem, y;
- const unsigned short int *ip;
+ long seconds;
int16_t offset;
+ struct tm tm;
offset = -sys_tz.tz_minuteswest;
@@ -130,35 +79,14 @@
dest->typeAndTimezone = cpu_to_le16(0x1000 | (offset & 0x0FFF));
- ts.tv_sec += offset * 60;
- days = ts.tv_sec / SECS_PER_DAY;
- rem = ts.tv_sec % SECS_PER_DAY;
- dest->hour = rem / SECS_PER_HOUR;
- rem %= SECS_PER_HOUR;
- dest->minute = rem / 60;
- dest->second = rem % 60;
- y = 1970;
-
-#define DIV(a, b) ((a) / (b) - ((a) % (b) < 0))
-#define LEAPS_THRU_END_OF(y) (DIV (y, 4) - DIV (y, 100) + DIV (y, 400))
-
- while (days < 0 || days >= (__isleap(y) ? 366 : 365)) {
- long int yg = y + days / 365 - (days % 365 < 0);
-
- /* Adjust DAYS and Y to match the guessed year. */
- days -= ((yg - y) * 365
- + LEAPS_THRU_END_OF(yg - 1)
- - LEAPS_THRU_END_OF(y - 1));
- y = yg;
- }
- dest->year = cpu_to_le16(y);
- ip = __mon_yday[__isleap(y)];
- for (y = 11; days < (long int)ip[y]; --y)
- continue;
- days -= ip[y];
- dest->month = y + 1;
- dest->day = days + 1;
-
+ seconds = ts.tv_sec + offset * 60;
+ time64_to_tm(seconds, 0, &tm);
+ dest->year = cpu_to_le16(tm.tm_year + 1900);
+ dest->month = tm.tm_mon + 1;
+ dest->day = tm.tm_mday;
+ dest->hour = tm.tm_hour;
+ dest->minute = tm.tm_min;
+ dest->second = tm.tm_sec;
dest->centiseconds = ts.tv_nsec / 10000000;
dest->hundredsOfMicroseconds = (ts.tv_nsec / 1000 -
dest->centiseconds * 10000) / 100;
diff --git a/fs/userfaultfd.c b/fs/userfaultfd.c
index cadcd12..06ea26b 100644
--- a/fs/userfaultfd.c
+++ b/fs/userfaultfd.c
@@ -854,6 +854,9 @@
__wake_up_locked_key(&ctx->fault_wqh, TASK_NORMAL, &range);
spin_unlock(&ctx->fault_pending_wqh.lock);
+ /* Flush pending events that may still wait on event_wqh */
+ wake_up_all(&ctx->event_wqh);
+
wake_up_poll(&ctx->fd_wqh, POLLHUP);
userfaultfd_ctx_put(ctx);
return 0;
@@ -1643,6 +1646,8 @@
ret = mfill_zeropage(ctx->mm, uffdio_zeropage.range.start,
uffdio_zeropage.range.len);
mmput(ctx->mm);
+ } else {
+ return -ENOSPC;
}
if (unlikely(put_user(ret, &user_uffdio_zeropage->zeropage)))
return -EFAULT;
diff --git a/fs/xfs/kmem.h b/fs/xfs/kmem.h
index d6ea520..4d85992 100644
--- a/fs/xfs/kmem.h
+++ b/fs/xfs/kmem.h
@@ -54,6 +54,16 @@
lflags &= ~__GFP_FS;
}
+ /*
+ * Default page/slab allocator behavior is to retry for ever
+ * for small allocations. We can override this behavior by using
+ * __GFP_RETRY_MAYFAIL which will tell the allocator to retry as long
+ * as it is feasible but rather fail than retry forever for all
+ * request sizes.
+ */
+ if (flags & KM_MAYFAIL)
+ lflags |= __GFP_RETRY_MAYFAIL;
+
if (flags & KM_ZERO)
lflags |= __GFP_ZERO;
diff --git a/fs/xfs/libxfs/xfs_attr.c b/fs/xfs/libxfs/xfs_attr.c
index ef8a1c7..de7b9bd 100644
--- a/fs/xfs/libxfs/xfs_attr.c
+++ b/fs/xfs/libxfs/xfs_attr.c
@@ -114,12 +114,14 @@
* Overall external interface routines.
*========================================================================*/
-/* Retrieve an extended attribute and its value. Must have iolock. */
+/* Retrieve an extended attribute and its value. Must have ilock. */
int
xfs_attr_get_ilocked(
struct xfs_inode *ip,
struct xfs_da_args *args)
{
+ ASSERT(xfs_isilocked(ip, XFS_ILOCK_SHARED | XFS_ILOCK_EXCL));
+
if (!xfs_inode_hasattr(ip))
return -ENOATTR;
else if (ip->i_d.di_aformat == XFS_DINODE_FMT_LOCAL)
diff --git a/fs/xfs/libxfs/xfs_bmap.c b/fs/xfs/libxfs/xfs_bmap.c
index 0a98807..c09c16b 100644
--- a/fs/xfs/libxfs/xfs_bmap.c
+++ b/fs/xfs/libxfs/xfs_bmap.c
@@ -5435,6 +5435,7 @@
xfs_fsblock_t sum;
xfs_filblks_t len = *rlen; /* length to unmap in file */
xfs_fileoff_t max_len;
+ xfs_agnumber_t prev_agno = NULLAGNUMBER, agno;
trace_xfs_bunmap(ip, bno, len, flags, _RET_IP_);
@@ -5534,6 +5535,17 @@
*/
del = got;
wasdel = isnullstartblock(del.br_startblock);
+
+ /*
+ * Make sure we don't touch multiple AGF headers out of order
+ * in a single transaction, as that could cause AB-BA deadlocks.
+ */
+ if (!wasdel) {
+ agno = XFS_FSB_TO_AGNO(mp, del.br_startblock);
+ if (prev_agno != NULLAGNUMBER && prev_agno > agno)
+ break;
+ prev_agno = agno;
+ }
if (got.br_startoff < start) {
del.br_startoff = start;
del.br_blockcount -= start - got.br_startoff;
@@ -6499,6 +6511,15 @@
xfs_fsblock_t firstfsb;
int error = 0;
+ /*
+ * firstfsb is tied to the transaction lifetime and is used to
+ * ensure correct AG locking order and schedule work item
+ * continuations. XFS_BUI_MAX_FAST_EXTENTS (== 1) restricts us
+ * to only making one bmap call per transaction, so it should
+ * be safe to have it as a local variable here.
+ */
+ firstfsb = NULLFSBLOCK;
+
trace_xfs_bmap_deferred(tp->t_mountp,
XFS_FSB_TO_AGNO(tp->t_mountp, startblock), type,
XFS_FSB_TO_AGBNO(tp->t_mountp, startblock),
diff --git a/fs/xfs/libxfs/xfs_btree.c b/fs/xfs/libxfs/xfs_btree.c
index 4da85ff..e0bcc4a 100644
--- a/fs/xfs/libxfs/xfs_btree.c
+++ b/fs/xfs/libxfs/xfs_btree.c
@@ -728,7 +728,8 @@
* Get the block pointer for this level.
*/
block = xfs_btree_get_block(cur, level, &bp);
- xfs_btree_check_block(cur, block, level, bp);
+ if (xfs_btree_check_block(cur, block, level, bp))
+ return 0;
/*
* It's empty, there is no such record.
*/
@@ -757,7 +758,8 @@
* Get the block pointer for this level.
*/
block = xfs_btree_get_block(cur, level, &bp);
- xfs_btree_check_block(cur, block, level, bp);
+ if (xfs_btree_check_block(cur, block, level, bp))
+ return 0;
/*
* It's empty, there is no such record.
*/
diff --git a/fs/xfs/libxfs/xfs_dir2_data.c b/fs/xfs/libxfs/xfs_dir2_data.c
index d478065..8727a43 100644
--- a/fs/xfs/libxfs/xfs_dir2_data.c
+++ b/fs/xfs/libxfs/xfs_dir2_data.c
@@ -136,6 +136,8 @@
*/
if (be16_to_cpu(dup->freetag) == XFS_DIR2_DATA_FREE_TAG) {
XFS_WANT_CORRUPTED_RETURN(mp, lastfree == 0);
+ XFS_WANT_CORRUPTED_RETURN(mp, endp >=
+ p + be16_to_cpu(dup->length));
XFS_WANT_CORRUPTED_RETURN(mp,
be16_to_cpu(*xfs_dir2_data_unused_tag_p(dup)) ==
(char *)dup - (char *)hdr);
@@ -164,6 +166,8 @@
XFS_WANT_CORRUPTED_RETURN(mp, dep->namelen != 0);
XFS_WANT_CORRUPTED_RETURN(mp,
!xfs_dir_ino_validate(mp, be64_to_cpu(dep->inumber)));
+ XFS_WANT_CORRUPTED_RETURN(mp, endp >=
+ p + ops->data_entsize(dep->namelen));
XFS_WANT_CORRUPTED_RETURN(mp,
be16_to_cpu(*ops->data_entry_tag_p(dep)) ==
(char *)dep - (char *)hdr);
diff --git a/fs/xfs/libxfs/xfs_quota_defs.h b/fs/xfs/libxfs/xfs_quota_defs.h
index 2834574..d69c772 100644
--- a/fs/xfs/libxfs/xfs_quota_defs.h
+++ b/fs/xfs/libxfs/xfs_quota_defs.h
@@ -136,8 +136,6 @@
*/
#define XFS_QMOPT_INHERIT 0x1000000
-#define XFS_QMOPT_NOLOCK 0x2000000 /* don't ilock during dqget */
-
/*
* flags to xfs_trans_mod_dquot.
*/
diff --git a/fs/xfs/libxfs/xfs_refcount.c b/fs/xfs/libxfs/xfs_refcount.c
index 900ea23..45b1c3b 100644
--- a/fs/xfs/libxfs/xfs_refcount.c
+++ b/fs/xfs/libxfs/xfs_refcount.c
@@ -1638,6 +1638,10 @@
error = xfs_alloc_read_agf(mp, tp, agno, 0, &agbp);
if (error)
goto out_trans;
+ if (!agbp) {
+ error = -ENOMEM;
+ goto out_trans;
+ }
cur = xfs_refcountbt_init_cursor(mp, tp, agbp, agno, NULL);
/* Find all the leftover CoW staging extents. */
diff --git a/fs/xfs/xfs_attr_list.c b/fs/xfs/xfs_attr_list.c
index 545eca5..7740c8a 100644
--- a/fs/xfs/xfs_attr_list.c
+++ b/fs/xfs/xfs_attr_list.c
@@ -463,6 +463,8 @@
{
struct xfs_inode *dp = context->dp;
+ ASSERT(xfs_isilocked(dp, XFS_ILOCK_SHARED | XFS_ILOCK_EXCL));
+
/*
* Decide on what work routines to call based on the inode size.
*/
diff --git a/fs/xfs/xfs_dquot.c b/fs/xfs/xfs_dquot.c
index f89f7b52..fd2ef8c 100644
--- a/fs/xfs/xfs_dquot.c
+++ b/fs/xfs/xfs_dquot.c
@@ -472,23 +472,18 @@
struct xfs_mount *mp = dqp->q_mount;
xfs_dqid_t id = be32_to_cpu(dqp->q_core.d_id);
struct xfs_trans *tp = (tpp ? *tpp : NULL);
- uint lock_mode = 0;
+ uint lock_mode;
quotip = xfs_quota_inode(dqp->q_mount, dqp->dq_flags);
dqp->q_fileoffset = (xfs_fileoff_t)id / mp->m_quotainfo->qi_dqperchunk;
- ASSERT(!(flags & XFS_QMOPT_NOLOCK) ||
- xfs_isilocked(quotip, XFS_ILOCK_SHARED) ||
- xfs_isilocked(quotip, XFS_ILOCK_EXCL));
- if (!(flags & XFS_QMOPT_NOLOCK))
- lock_mode = xfs_ilock_data_map_shared(quotip);
+ lock_mode = xfs_ilock_data_map_shared(quotip);
if (!xfs_this_quota_on(dqp->q_mount, dqp->dq_flags)) {
/*
* Return if this type of quotas is turned off while we
* didn't have the quota inode lock.
*/
- if (lock_mode)
- xfs_iunlock(quotip, lock_mode);
+ xfs_iunlock(quotip, lock_mode);
return -ESRCH;
}
@@ -498,8 +493,7 @@
error = xfs_bmapi_read(quotip, dqp->q_fileoffset,
XFS_DQUOT_CLUSTER_SIZE_FSB, &map, &nmaps, 0);
- if (lock_mode)
- xfs_iunlock(quotip, lock_mode);
+ xfs_iunlock(quotip, lock_mode);
if (error)
return error;
diff --git a/fs/xfs/xfs_qm.c b/fs/xfs/xfs_qm.c
index 6ce948c..15751dc 100644
--- a/fs/xfs/xfs_qm.c
+++ b/fs/xfs/xfs_qm.c
@@ -111,6 +111,9 @@
skipped = 0;
break;
}
+ /* we're done if id overflows back to zero */
+ if (!next_index)
+ break;
}
if (skipped) {
diff --git a/fs/xfs/xfs_reflink.c b/fs/xfs/xfs_reflink.c
index ab2270a..f45fbf0 100644
--- a/fs/xfs/xfs_reflink.c
+++ b/fs/xfs/xfs_reflink.c
@@ -170,6 +170,8 @@
error = xfs_alloc_read_agf(mp, tp, agno, 0, &agbp);
if (error)
return error;
+ if (!agbp)
+ return -ENOMEM;
cur = xfs_refcountbt_init_cursor(mp, tp, agbp, agno, NULL);
@@ -329,7 +331,7 @@
xfs_filblks_t count_fsb,
struct xfs_defer_ops *dfops)
{
- xfs_fsblock_t first_block;
+ xfs_fsblock_t first_block = NULLFSBLOCK;
int nimaps = 1;
if (imap->br_state == XFS_EXT_NORM)
diff --git a/fs/xfs/xfs_symlink.c b/fs/xfs/xfs_symlink.c
index 12cd9cf7..23a50d7 100644
--- a/fs/xfs/xfs_symlink.c
+++ b/fs/xfs/xfs_symlink.c
@@ -61,6 +61,8 @@
int fsblocks = 0;
int offset;
+ ASSERT(xfs_isilocked(ip, XFS_ILOCK_SHARED | XFS_ILOCK_EXCL));
+
fsblocks = xfs_symlink_blocks(mp, pathlen);
error = xfs_bmapi_read(ip, 0, fsblocks, mval, &nmaps, 0);
if (error)
diff --git a/include/acpi/acpi_numa.h b/include/acpi/acpi_numa.h
index d4b7294..1e3a74f 100644
--- a/include/acpi/acpi_numa.h
+++ b/include/acpi/acpi_numa.h
@@ -3,6 +3,7 @@
#ifdef CONFIG_ACPI_NUMA
#include <linux/kernel.h>
+#include <linux/numa.h>
/* Proximity bitmap length */
#if MAX_NUMNODES > 256
diff --git a/include/asm-generic/uaccess-unaligned.h b/include/asm-generic/uaccess-unaligned.h
deleted file mode 100644
index 67deb89..0000000
--- a/include/asm-generic/uaccess-unaligned.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef __ASM_GENERIC_UACCESS_UNALIGNED_H
-#define __ASM_GENERIC_UACCESS_UNALIGNED_H
-
-/*
- * This macro should be used instead of __get_user() when accessing
- * values at locations that are not known to be aligned.
- */
-#define __get_user_unaligned(x, ptr) \
-({ \
- __typeof__ (*(ptr)) __x; \
- __copy_from_user(&__x, (ptr), sizeof(*(ptr))) ? -EFAULT : 0; \
- (x) = __x; \
-})
-
-
-/*
- * This macro should be used instead of __put_user() when accessing
- * values at locations that are not known to be aligned.
- */
-#define __put_user_unaligned(x, ptr) \
-({ \
- __typeof__ (*(ptr)) __x = (x); \
- __copy_to_user((ptr), &__x, sizeof(*(ptr))) ? -EFAULT : 0; \
-})
-
-#endif /* __ASM_GENERIC_UACCESS_UNALIGNED_H */
diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
index 4c8d4c8..182f832 100644
--- a/include/drm/bridge/dw_hdmi.h
+++ b/include/drm/bridge/dw_hdmi.h
@@ -22,56 +22,56 @@
* 48bit bus.
*
* +----------------------+----------------------------------+------------------------------+
- * + Format Name + Format Code + Encodings +
+ * | Format Name | Format Code | Encodings |
* +----------------------+----------------------------------+------------------------------+
- * + RGB 4:4:4 8bit + ``MEDIA_BUS_FMT_RGB888_1X24`` + ``V4L2_YCBCR_ENC_DEFAULT`` +
+ * | RGB 4:4:4 8bit | ``MEDIA_BUS_FMT_RGB888_1X24`` | ``V4L2_YCBCR_ENC_DEFAULT`` |
* +----------------------+----------------------------------+------------------------------+
- * + RGB 4:4:4 10bits + ``MEDIA_BUS_FMT_RGB101010_1X30`` + ``V4L2_YCBCR_ENC_DEFAULT`` +
+ * | RGB 4:4:4 10bits | ``MEDIA_BUS_FMT_RGB101010_1X30`` | ``V4L2_YCBCR_ENC_DEFAULT`` |
* +----------------------+----------------------------------+------------------------------+
- * + RGB 4:4:4 12bits + ``MEDIA_BUS_FMT_RGB121212_1X36`` + ``V4L2_YCBCR_ENC_DEFAULT`` +
+ * | RGB 4:4:4 12bits | ``MEDIA_BUS_FMT_RGB121212_1X36`` | ``V4L2_YCBCR_ENC_DEFAULT`` |
* +----------------------+----------------------------------+------------------------------+
- * + RGB 4:4:4 16bits + ``MEDIA_BUS_FMT_RGB161616_1X48`` + ``V4L2_YCBCR_ENC_DEFAULT`` +
+ * | RGB 4:4:4 16bits | ``MEDIA_BUS_FMT_RGB161616_1X48`` | ``V4L2_YCBCR_ENC_DEFAULT`` |
* +----------------------+----------------------------------+------------------------------+
- * + YCbCr 4:4:4 8bit + ``MEDIA_BUS_FMT_YUV8_1X24`` + ``V4L2_YCBCR_ENC_601`` +
- * + + + or ``V4L2_YCBCR_ENC_709`` +
- * + + + or ``V4L2_YCBCR_ENC_XV601`` +
- * + + + or ``V4L2_YCBCR_ENC_XV709`` +
+ * | YCbCr 4:4:4 8bit | ``MEDIA_BUS_FMT_YUV8_1X24`` | ``V4L2_YCBCR_ENC_601`` |
+ * | | | or ``V4L2_YCBCR_ENC_709`` |
+ * | | | or ``V4L2_YCBCR_ENC_XV601`` |
+ * | | | or ``V4L2_YCBCR_ENC_XV709`` |
* +----------------------+----------------------------------+------------------------------+
- * + YCbCr 4:4:4 10bits + ``MEDIA_BUS_FMT_YUV10_1X30`` + ``V4L2_YCBCR_ENC_601`` +
- * + + + or ``V4L2_YCBCR_ENC_709`` +
- * + + + or ``V4L2_YCBCR_ENC_XV601`` +
- * + + + or ``V4L2_YCBCR_ENC_XV709`` +
+ * | YCbCr 4:4:4 10bits | ``MEDIA_BUS_FMT_YUV10_1X30`` | ``V4L2_YCBCR_ENC_601`` |
+ * | | | or ``V4L2_YCBCR_ENC_709`` |
+ * | | | or ``V4L2_YCBCR_ENC_XV601`` |
+ * | | | or ``V4L2_YCBCR_ENC_XV709`` |
* +----------------------+----------------------------------+------------------------------+
- * + YCbCr 4:4:4 12bits + ``MEDIA_BUS_FMT_YUV12_1X36`` + ``V4L2_YCBCR_ENC_601`` +
- * + + + or ``V4L2_YCBCR_ENC_709`` +
- * + + + or ``V4L2_YCBCR_ENC_XV601`` +
- * + + + or ``V4L2_YCBCR_ENC_XV709`` +
+ * | YCbCr 4:4:4 12bits | ``MEDIA_BUS_FMT_YUV12_1X36`` | ``V4L2_YCBCR_ENC_601`` |
+ * | | | or ``V4L2_YCBCR_ENC_709`` |
+ * | | | or ``V4L2_YCBCR_ENC_XV601`` |
+ * | | | or ``V4L2_YCBCR_ENC_XV709`` |
* +----------------------+----------------------------------+------------------------------+
- * + YCbCr 4:4:4 16bits + ``MEDIA_BUS_FMT_YUV16_1X48`` + ``V4L2_YCBCR_ENC_601`` +
- * + + + or ``V4L2_YCBCR_ENC_709`` +
- * + + + or ``V4L2_YCBCR_ENC_XV601`` +
- * + + + or ``V4L2_YCBCR_ENC_XV709`` +
+ * | YCbCr 4:4:4 16bits | ``MEDIA_BUS_FMT_YUV16_1X48`` | ``V4L2_YCBCR_ENC_601`` |
+ * | | | or ``V4L2_YCBCR_ENC_709`` |
+ * | | | or ``V4L2_YCBCR_ENC_XV601`` |
+ * | | | or ``V4L2_YCBCR_ENC_XV709`` |
* +----------------------+----------------------------------+------------------------------+
- * + YCbCr 4:2:2 8bit + ``MEDIA_BUS_FMT_UYVY8_1X16`` + ``V4L2_YCBCR_ENC_601`` +
- * + + + or ``V4L2_YCBCR_ENC_709`` +
+ * | YCbCr 4:2:2 8bit | ``MEDIA_BUS_FMT_UYVY8_1X16`` | ``V4L2_YCBCR_ENC_601`` |
+ * | | | or ``V4L2_YCBCR_ENC_709`` |
* +----------------------+----------------------------------+------------------------------+
- * + YCbCr 4:2:2 10bits + ``MEDIA_BUS_FMT_UYVY10_1X20`` + ``V4L2_YCBCR_ENC_601`` +
- * + + + or ``V4L2_YCBCR_ENC_709`` +
+ * | YCbCr 4:2:2 10bits | ``MEDIA_BUS_FMT_UYVY10_1X20`` | ``V4L2_YCBCR_ENC_601`` |
+ * | | | or ``V4L2_YCBCR_ENC_709`` |
* +----------------------+----------------------------------+------------------------------+
- * + YCbCr 4:2:2 12bits + ``MEDIA_BUS_FMT_UYVY12_1X24`` + ``V4L2_YCBCR_ENC_601`` +
- * + + + or ``V4L2_YCBCR_ENC_709`` +
+ * | YCbCr 4:2:2 12bits | ``MEDIA_BUS_FMT_UYVY12_1X24`` | ``V4L2_YCBCR_ENC_601`` |
+ * | | | or ``V4L2_YCBCR_ENC_709`` |
* +----------------------+----------------------------------+------------------------------+
- * + YCbCr 4:2:0 8bit + ``MEDIA_BUS_FMT_UYYVYY8_0_5X24`` + ``V4L2_YCBCR_ENC_601`` +
- * + + + or ``V4L2_YCBCR_ENC_709`` +
+ * | YCbCr 4:2:0 8bit | ``MEDIA_BUS_FMT_UYYVYY8_0_5X24`` | ``V4L2_YCBCR_ENC_601`` |
+ * | | | or ``V4L2_YCBCR_ENC_709`` |
* +----------------------+----------------------------------+------------------------------+
- * + YCbCr 4:2:0 10bits + ``MEDIA_BUS_FMT_UYYVYY10_0_5X30``+ ``V4L2_YCBCR_ENC_601`` +
- * + + + or ``V4L2_YCBCR_ENC_709`` +
+ * | YCbCr 4:2:0 10bits | ``MEDIA_BUS_FMT_UYYVYY10_0_5X30``| ``V4L2_YCBCR_ENC_601`` |
+ * | | | or ``V4L2_YCBCR_ENC_709`` |
* +----------------------+----------------------------------+------------------------------+
- * + YCbCr 4:2:0 12bits + ``MEDIA_BUS_FMT_UYYVYY12_0_5X36``+ ``V4L2_YCBCR_ENC_601`` +
- * + + + or ``V4L2_YCBCR_ENC_709`` +
+ * | YCbCr 4:2:0 12bits | ``MEDIA_BUS_FMT_UYYVYY12_0_5X36``| ``V4L2_YCBCR_ENC_601`` |
+ * | | | or ``V4L2_YCBCR_ENC_709`` |
* +----------------------+----------------------------------+------------------------------+
- * + YCbCr 4:2:0 16bits + ``MEDIA_BUS_FMT_UYYVYY16_0_5X48``+ ``V4L2_YCBCR_ENC_601`` +
- * + + + or ``V4L2_YCBCR_ENC_709`` +
+ * | YCbCr 4:2:0 16bits | ``MEDIA_BUS_FMT_UYYVYY16_0_5X48``| ``V4L2_YCBCR_ENC_601`` |
+ * | | | or ``V4L2_YCBCR_ENC_709`` |
* +----------------------+----------------------------------+------------------------------+
*/
diff --git a/include/dt-bindings/clock/boston-clock.h b/include/dt-bindings/clock/boston-clock.h
new file mode 100644
index 0000000..a6f0098
--- /dev/null
+++ b/include/dt-bindings/clock/boston-clock.h
@@ -0,0 +1,14 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_BOSTON_CLOCK_H__
+#define __DT_BINDINGS_CLOCK_BOSTON_CLOCK_H__
+
+#define BOSTON_CLK_INPUT 0
+#define BOSTON_CLK_SYS 1
+#define BOSTON_CLK_CPU 2
+
+#endif /* __DT_BINDINGS_CLOCK_BOSTON_CLOCK_H__ */
diff --git a/include/kvm/arm_pmu.h b/include/kvm/arm_pmu.h
index f6e0306..f87fe20 100644
--- a/include/kvm/arm_pmu.h
+++ b/include/kvm/arm_pmu.h
@@ -48,7 +48,6 @@
void kvm_pmu_vcpu_destroy(struct kvm_vcpu *vcpu);
void kvm_pmu_disable_counter(struct kvm_vcpu *vcpu, u64 val);
void kvm_pmu_enable_counter(struct kvm_vcpu *vcpu, u64 val);
-void kvm_pmu_overflow_set(struct kvm_vcpu *vcpu, u64 val);
void kvm_pmu_flush_hwstate(struct kvm_vcpu *vcpu);
void kvm_pmu_sync_hwstate(struct kvm_vcpu *vcpu);
bool kvm_pmu_should_notify_user(struct kvm_vcpu *vcpu);
@@ -86,7 +85,6 @@
static inline void kvm_pmu_vcpu_destroy(struct kvm_vcpu *vcpu) {}
static inline void kvm_pmu_disable_counter(struct kvm_vcpu *vcpu, u64 val) {}
static inline void kvm_pmu_enable_counter(struct kvm_vcpu *vcpu, u64 val) {}
-static inline void kvm_pmu_overflow_set(struct kvm_vcpu *vcpu, u64 val) {}
static inline void kvm_pmu_flush_hwstate(struct kvm_vcpu *vcpu) {}
static inline void kvm_pmu_sync_hwstate(struct kvm_vcpu *vcpu) {}
static inline bool kvm_pmu_should_notify_user(struct kvm_vcpu *vcpu)
diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h
index 334165c..854e1bd 100644
--- a/include/linux/backing-dev.h
+++ b/include/linux/backing-dev.h
@@ -69,34 +69,14 @@
percpu_counter_add_batch(&wb->stat[item], amount, WB_STAT_BATCH);
}
-static inline void __inc_wb_stat(struct bdi_writeback *wb,
- enum wb_stat_item item)
+static inline void inc_wb_stat(struct bdi_writeback *wb, enum wb_stat_item item)
{
__add_wb_stat(wb, item, 1);
}
-static inline void inc_wb_stat(struct bdi_writeback *wb, enum wb_stat_item item)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- __inc_wb_stat(wb, item);
- local_irq_restore(flags);
-}
-
-static inline void __dec_wb_stat(struct bdi_writeback *wb,
- enum wb_stat_item item)
-{
- __add_wb_stat(wb, item, -1);
-}
-
static inline void dec_wb_stat(struct bdi_writeback *wb, enum wb_stat_item item)
{
- unsigned long flags;
-
- local_irq_save(flags);
- __dec_wb_stat(wb, item);
- local_irq_restore(flags);
+ __add_wb_stat(wb, item, -1);
}
static inline s64 wb_stat(struct bdi_writeback *wb, enum wb_stat_item item)
diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h
index 05488da..3ae9013 100644
--- a/include/linux/binfmts.h
+++ b/include/linux/binfmts.h
@@ -46,7 +46,7 @@
unsigned interp_flags;
unsigned interp_data;
unsigned long loader, exec;
-};
+} __randomize_layout;
#define BINPRM_FLAGS_ENFORCE_NONDUMP_BIT 0
#define BINPRM_FLAGS_ENFORCE_NONDUMP (1 << BINPRM_FLAGS_ENFORCE_NONDUMP_BIT)
@@ -81,7 +81,7 @@
int (*load_shlib)(struct file *);
int (*core_dump)(struct coredump_params *cprm);
unsigned long min_coredump; /* minimal dump size */
-};
+} __randomize_layout;
extern void __register_binfmt(struct linux_binfmt *fmt, int insert);
diff --git a/include/linux/bpf-cgroup.h b/include/linux/bpf-cgroup.h
index 360c082..d41d40a 100644
--- a/include/linux/bpf-cgroup.h
+++ b/include/linux/bpf-cgroup.h
@@ -85,7 +85,7 @@
int __ret = 0; \
if (cgroup_bpf_enabled && (sock_ops)->sk) { \
typeof(sk) __sk = sk_to_full_sk((sock_ops)->sk); \
- if (sk_fullsock(__sk)) \
+ if (__sk && sk_fullsock(__sk)) \
__ret = __cgroup_bpf_run_filter_sock_ops(__sk, \
sock_ops, \
BPF_CGROUP_SOCK_OPS); \
diff --git a/include/linux/bpf_verifier.h b/include/linux/bpf_verifier.h
index 621076f..8e5d31f 100644
--- a/include/linux/bpf_verifier.h
+++ b/include/linux/bpf_verifier.h
@@ -43,6 +43,7 @@
u32 min_align;
u32 aux_off;
u32 aux_off_align;
+ bool value_from_signed;
};
enum bpf_stack_slot_type {
diff --git a/include/linux/bsg-lib.h b/include/linux/bsg-lib.h
index e34dde2..1062f08 100644
--- a/include/linux/bsg-lib.h
+++ b/include/linux/bsg-lib.h
@@ -66,8 +66,9 @@
void bsg_job_done(struct bsg_job *job, int result,
unsigned int reply_payload_rcv_len);
-struct request_queue *bsg_setup_queue(struct device *dev, char *name,
- bsg_job_fn *job_fn, int dd_job_size);
+struct request_queue *bsg_setup_queue(struct device *dev, const char *name,
+ bsg_job_fn *job_fn, int dd_job_size,
+ void (*release)(struct device *));
void bsg_job_put(struct bsg_job *job);
int __must_check bsg_job_get(struct bsg_job *job);
diff --git a/include/linux/cdev.h b/include/linux/cdev.h
index 408bc09..cb28eb2 100644
--- a/include/linux/cdev.h
+++ b/include/linux/cdev.h
@@ -17,7 +17,7 @@
struct list_head list;
dev_t dev;
unsigned int count;
-};
+} __randomize_layout;
void cdev_init(struct cdev *, const struct file_operations *);
diff --git a/include/linux/ceph/ceph_features.h b/include/linux/ceph/ceph_features.h
index f0f6c53..040dd10 100644
--- a/include/linux/ceph/ceph_features.h
+++ b/include/linux/ceph/ceph_features.h
@@ -10,14 +10,14 @@
#define CEPH_FEATURE_INCARNATION_2 (1ull<<57) // CEPH_FEATURE_SERVER_JEWEL
#define DEFINE_CEPH_FEATURE(bit, incarnation, name) \
- const static uint64_t CEPH_FEATURE_##name = (1ULL<<bit); \
- const static uint64_t CEPH_FEATUREMASK_##name = \
+ static const uint64_t CEPH_FEATURE_##name = (1ULL<<bit); \
+ static const uint64_t CEPH_FEATUREMASK_##name = \
(1ULL<<bit | CEPH_FEATURE_INCARNATION_##incarnation);
/* this bit is ignored but still advertised by release *when* */
#define DEFINE_CEPH_FEATURE_DEPRECATED(bit, incarnation, name, when) \
- const static uint64_t DEPRECATED_CEPH_FEATURE_##name = (1ULL<<bit); \
- const static uint64_t DEPRECATED_CEPH_FEATUREMASK_##name = \
+ static const uint64_t DEPRECATED_CEPH_FEATURE_##name = (1ULL<<bit); \
+ static const uint64_t DEPRECATED_CEPH_FEATUREMASK_##name = \
(1ULL<<bit | CEPH_FEATURE_INCARNATION_##incarnation);
/*
diff --git a/include/linux/ceph/osd_client.h b/include/linux/ceph/osd_client.h
index c6d96a5..adf670e 100644
--- a/include/linux/ceph/osd_client.h
+++ b/include/linux/ceph/osd_client.h
@@ -148,6 +148,7 @@
int size;
int min_size;
bool sort_bitwise;
+ bool recovery_deletes;
unsigned int flags; /* CEPH_OSD_FLAG_* */
bool paused;
diff --git a/include/linux/ceph/osdmap.h b/include/linux/ceph/osdmap.h
index a0996cb..af3444a 100644
--- a/include/linux/ceph/osdmap.h
+++ b/include/linux/ceph/osdmap.h
@@ -272,6 +272,8 @@
u32 new_pg_num,
bool old_sort_bitwise,
bool new_sort_bitwise,
+ bool old_recovery_deletes,
+ bool new_recovery_deletes,
const struct ceph_pg *pgid);
bool ceph_osds_changed(const struct ceph_osds *old_acting,
const struct ceph_osds *new_acting,
diff --git a/include/linux/ceph/rados.h b/include/linux/ceph/rados.h
index 385db08..b8281fe 100644
--- a/include/linux/ceph/rados.h
+++ b/include/linux/ceph/rados.h
@@ -158,6 +158,10 @@
#define CEPH_OSDMAP_NOTIERAGENT (1<<13) /* disable tiering agent */
#define CEPH_OSDMAP_NOREBALANCE (1<<14) /* block osd backfill unless pg is degraded */
#define CEPH_OSDMAP_SORTBITWISE (1<<15) /* use bitwise hobject_t sort */
+#define CEPH_OSDMAP_REQUIRE_JEWEL (1<<16) /* require jewel for booting osds */
+#define CEPH_OSDMAP_REQUIRE_KRAKEN (1<<17) /* require kraken for booting osds */
+#define CEPH_OSDMAP_REQUIRE_LUMINOUS (1<<18) /* require l for booting osds */
+#define CEPH_OSDMAP_RECOVERY_DELETES (1<<19) /* deletes performed during recovery instead of peering */
/*
* The error code to return when an OSD can't handle a write
diff --git a/include/linux/clk.h b/include/linux/clk.h
index 91bd464..12c96d9 100644
--- a/include/linux/clk.h
+++ b/include/linux/clk.h
@@ -657,6 +657,28 @@
clk_unprepare(clk);
}
+static inline int clk_bulk_prepare_enable(int num_clks,
+ struct clk_bulk_data *clks)
+{
+ int ret;
+
+ ret = clk_bulk_prepare(num_clks, clks);
+ if (ret)
+ return ret;
+ ret = clk_bulk_enable(num_clks, clks);
+ if (ret)
+ clk_bulk_unprepare(num_clks, clks);
+
+ return ret;
+}
+
+static inline void clk_bulk_disable_unprepare(int num_clks,
+ struct clk_bulk_data *clks)
+{
+ clk_bulk_disable(num_clks, clks);
+ clk_bulk_unprepare(num_clks, clks);
+}
+
#if defined(CONFIG_OF) && defined(CONFIG_COMMON_CLK)
struct clk *of_clk_get(struct device_node *np, int index);
struct clk *of_clk_get_by_name(struct device_node *np, const char *name);
diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h
index cd4bbe8..bdb80c4 100644
--- a/include/linux/compiler-gcc.h
+++ b/include/linux/compiler-gcc.h
@@ -235,6 +235,7 @@
#endif /* GCC_VERSION >= 40500 */
#if GCC_VERSION >= 40600
+
/*
* When used with Link Time Optimization, gcc can optimize away C functions or
* variables which are referenced only from assembly code. __visible tells the
@@ -242,7 +243,17 @@
* this.
*/
#define __visible __attribute__((externally_visible))
-#endif
+
+/*
+ * RANDSTRUCT_PLUGIN wants to use an anonymous struct, but it is only
+ * possible since GCC 4.6. To provide as much build testing coverage
+ * as possible, this is used for all GCC 4.6+ builds, and not just on
+ * RANDSTRUCT_PLUGIN builds.
+ */
+#define randomized_struct_fields_start struct {
+#define randomized_struct_fields_end } __randomize_layout;
+
+#endif /* GCC_VERSION >= 40600 */
#if GCC_VERSION >= 40900 && !defined(__CHECKER__)
diff --git a/include/linux/compiler.h b/include/linux/compiler.h
index 219f82f..eca8ad7 100644
--- a/include/linux/compiler.h
+++ b/include/linux/compiler.h
@@ -452,6 +452,11 @@
# define __no_randomize_layout
#endif
+#ifndef randomized_struct_fields_start
+# define randomized_struct_fields_start
+# define randomized_struct_fields_end
+#endif
+
/*
* Tell gcc if a function is cold. The compiler will assume any path
* directly leading to the call is unlikely.
diff --git a/include/linux/cpu_cooling.h b/include/linux/cpu_cooling.h
index c156f50..d4292eb 100644
--- a/include/linux/cpu_cooling.h
+++ b/include/linux/cpu_cooling.h
@@ -28,47 +28,49 @@
#include <linux/thermal.h>
#include <linux/cpumask.h>
+struct cpufreq_policy;
+
typedef int (*get_static_t)(cpumask_t *cpumask, int interval,
unsigned long voltage, u32 *power);
#ifdef CONFIG_CPU_THERMAL
/**
* cpufreq_cooling_register - function to create cpufreq cooling device.
- * @clip_cpus: cpumask of cpus where the frequency constraints will happen
+ * @policy: cpufreq policy.
*/
struct thermal_cooling_device *
-cpufreq_cooling_register(const struct cpumask *clip_cpus);
+cpufreq_cooling_register(struct cpufreq_policy *policy);
struct thermal_cooling_device *
-cpufreq_power_cooling_register(const struct cpumask *clip_cpus,
+cpufreq_power_cooling_register(struct cpufreq_policy *policy,
u32 capacitance, get_static_t plat_static_func);
/**
* of_cpufreq_cooling_register - create cpufreq cooling device based on DT.
* @np: a valid struct device_node to the cooling device device tree node.
- * @clip_cpus: cpumask of cpus where the frequency constraints will happen
+ * @policy: cpufreq policy.
*/
#ifdef CONFIG_THERMAL_OF
struct thermal_cooling_device *
of_cpufreq_cooling_register(struct device_node *np,
- const struct cpumask *clip_cpus);
+ struct cpufreq_policy *policy);
struct thermal_cooling_device *
of_cpufreq_power_cooling_register(struct device_node *np,
- const struct cpumask *clip_cpus,
+ struct cpufreq_policy *policy,
u32 capacitance,
get_static_t plat_static_func);
#else
static inline struct thermal_cooling_device *
of_cpufreq_cooling_register(struct device_node *np,
- const struct cpumask *clip_cpus)
+ struct cpufreq_policy *policy)
{
return ERR_PTR(-ENOSYS);
}
static inline struct thermal_cooling_device *
of_cpufreq_power_cooling_register(struct device_node *np,
- const struct cpumask *clip_cpus,
+ struct cpufreq_policy *policy,
u32 capacitance,
get_static_t plat_static_func)
{
@@ -82,15 +84,14 @@
*/
void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev);
-unsigned long cpufreq_cooling_get_level(unsigned int cpu, unsigned int freq);
#else /* !CONFIG_CPU_THERMAL */
static inline struct thermal_cooling_device *
-cpufreq_cooling_register(const struct cpumask *clip_cpus)
+cpufreq_cooling_register(struct cpufreq_policy *policy)
{
return ERR_PTR(-ENOSYS);
}
static inline struct thermal_cooling_device *
-cpufreq_power_cooling_register(const struct cpumask *clip_cpus,
+cpufreq_power_cooling_register(struct cpufreq_policy *policy,
u32 capacitance, get_static_t plat_static_func)
{
return NULL;
@@ -98,14 +99,14 @@
static inline struct thermal_cooling_device *
of_cpufreq_cooling_register(struct device_node *np,
- const struct cpumask *clip_cpus)
+ struct cpufreq_policy *policy)
{
return ERR_PTR(-ENOSYS);
}
static inline struct thermal_cooling_device *
of_cpufreq_power_cooling_register(struct device_node *np,
- const struct cpumask *clip_cpus,
+ struct cpufreq_policy *policy,
u32 capacitance,
get_static_t plat_static_func)
{
@@ -117,11 +118,6 @@
{
return;
}
-static inline
-unsigned long cpufreq_cooling_get_level(unsigned int cpu, unsigned int freq)
-{
- return THERMAL_CSTATE_INVALID;
-}
#endif /* CONFIG_CPU_THERMAL */
#endif /* __CPU_COOLING_H__ */
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index 905117b..f10a9b3 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -862,6 +862,20 @@
return -EINVAL;
}
}
+
+static inline int cpufreq_table_count_valid_entries(const struct cpufreq_policy *policy)
+{
+ struct cpufreq_frequency_table *pos;
+ int count = 0;
+
+ if (unlikely(!policy->freq_table))
+ return 0;
+
+ cpufreq_for_each_valid_entry(pos, policy->freq_table)
+ count++;
+
+ return count;
+}
#else
static inline int cpufreq_boost_trigger_state(int state)
{
diff --git a/include/linux/cpuset.h b/include/linux/cpuset.h
index 119a3f9..898cfe2 100644
--- a/include/linux/cpuset.h
+++ b/include/linux/cpuset.h
@@ -18,6 +18,19 @@
#ifdef CONFIG_CPUSETS
+/*
+ * Static branch rewrites can happen in an arbitrary order for a given
+ * key. In code paths where we need to loop with read_mems_allowed_begin() and
+ * read_mems_allowed_retry() to get a consistent view of mems_allowed, we need
+ * to ensure that begin() always gets rewritten before retry() in the
+ * disabled -> enabled transition. If not, then if local irqs are disabled
+ * around the loop, we can deadlock since retry() would always be
+ * comparing the latest value of the mems_allowed seqcount against 0 as
+ * begin() still would see cpusets_enabled() as false. The enabled -> disabled
+ * transition should happen in reverse order for the same reasons (want to stop
+ * looking at real value of mems_allowed.sequence in retry() first).
+ */
+extern struct static_key_false cpusets_pre_enable_key;
extern struct static_key_false cpusets_enabled_key;
static inline bool cpusets_enabled(void)
{
@@ -32,12 +45,14 @@
static inline void cpuset_inc(void)
{
+ static_branch_inc(&cpusets_pre_enable_key);
static_branch_inc(&cpusets_enabled_key);
}
static inline void cpuset_dec(void)
{
static_branch_dec(&cpusets_enabled_key);
+ static_branch_dec(&cpusets_pre_enable_key);
}
extern int cpuset_init(void);
@@ -115,7 +130,7 @@
*/
static inline unsigned int read_mems_allowed_begin(void)
{
- if (!cpusets_enabled())
+ if (!static_branch_unlikely(&cpusets_pre_enable_key))
return 0;
return read_seqcount_begin(¤t->mems_allowed_seq);
@@ -129,7 +144,7 @@
*/
static inline bool read_mems_allowed_retry(unsigned int seq)
{
- if (!cpusets_enabled())
+ if (!static_branch_unlikely(&cpusets_enabled_key))
return false;
return read_seqcount_retry(¤t->mems_allowed_seq, seq);
diff --git a/include/linux/crash_core.h b/include/linux/crash_core.h
index 4090a42..2df2118 100644
--- a/include/linux/crash_core.h
+++ b/include/linux/crash_core.h
@@ -19,7 +19,7 @@
CRASH_CORE_NOTE_NAME_BYTES + \
CRASH_CORE_NOTE_DESC_BYTES)
-#define VMCOREINFO_BYTES (4096)
+#define VMCOREINFO_BYTES PAGE_SIZE
#define VMCOREINFO_NOTE_NAME "VMCOREINFO"
#define VMCOREINFO_NOTE_NAME_BYTES ALIGN(sizeof(VMCOREINFO_NOTE_NAME), 4)
#define VMCOREINFO_NOTE_SIZE ((CRASH_CORE_NOTE_HEAD_BYTES * 2) + \
@@ -28,6 +28,7 @@
typedef u32 note_buf_t[CRASH_CORE_NOTE_BYTES/4];
+void crash_update_vmcoreinfo_safecopy(void *ptr);
void crash_save_vmcoreinfo(void);
void arch_crash_save_vmcoreinfo(void);
__printf(1, 2)
@@ -56,9 +57,7 @@
#define VMCOREINFO_CONFIG(name) \
vmcoreinfo_append_str("CONFIG_%s=y\n", #name)
-extern u32 vmcoreinfo_note[VMCOREINFO_NOTE_SIZE/4];
-extern size_t vmcoreinfo_size;
-extern size_t vmcoreinfo_max_size;
+extern u32 *vmcoreinfo_note;
Elf_Word *append_elf_note(Elf_Word *buf, char *name, unsigned int type,
void *data, size_t data_len);
diff --git a/include/linux/cred.h b/include/linux/cred.h
index c728d51..099058e 100644
--- a/include/linux/cred.h
+++ b/include/linux/cred.h
@@ -31,7 +31,7 @@
atomic_t usage;
int ngroups;
kgid_t gid[0];
-};
+} __randomize_layout;
/**
* get_group_info - Get a reference to a group info structure
@@ -145,7 +145,7 @@
struct user_namespace *user_ns; /* user_ns the caps and keyrings are relative to. */
struct group_info *group_info; /* supplementary groups for euid/fsgid */
struct rcu_head rcu; /* RCU deletion hook */
-};
+} __randomize_layout;
extern void __put_cred(struct cred *);
extern void exit_creds(struct task_struct *);
diff --git a/include/linux/crush/crush.h b/include/linux/crush/crush.h
index 92e165d..07eed95 100644
--- a/include/linux/crush/crush.h
+++ b/include/linux/crush/crush.h
@@ -193,7 +193,7 @@
struct crush_choose_arg_map {
#ifdef __KERNEL__
struct rb_node node;
- u64 choose_args_index;
+ s64 choose_args_index;
#endif
struct crush_choose_arg *args; /*!< replacement for each bucket
in the crushmap */
diff --git a/include/linux/dax.h b/include/linux/dax.h
index 7948118..df97b7a 100644
--- a/include/linux/dax.h
+++ b/include/linux/dax.h
@@ -87,6 +87,7 @@
void dax_flush(struct dax_device *dax_dev, pgoff_t pgoff, void *addr,
size_t size);
void dax_write_cache(struct dax_device *dax_dev, bool wc);
+bool dax_write_cache_enabled(struct dax_device *dax_dev);
/*
* We use lowest available bit in exceptional entry for locking, one bit for
diff --git a/include/linux/dcache.h b/include/linux/dcache.h
index 025727b..aae1cdb 100644
--- a/include/linux/dcache.h
+++ b/include/linux/dcache.h
@@ -55,6 +55,11 @@
#define QSTR_INIT(n,l) { { { .len = l } }, .name = n }
+extern const char empty_string[];
+extern const struct qstr empty_name;
+extern const char slash_string[];
+extern const struct qstr slash_name;
+
struct dentry_stat_t {
long nr_dentry;
long nr_unused;
@@ -113,7 +118,7 @@
struct hlist_bl_node d_in_lookup_hash; /* only for in-lookup ones */
struct rcu_head d_rcu;
} d_u;
-};
+} __randomize_layout;
/*
* dentry->d_lock spinlock nesting subclasses:
@@ -592,8 +597,8 @@
}
struct name_snapshot {
- const char *name;
- char inline_name[DNAME_INLINE_LEN];
+ const unsigned char *name;
+ unsigned char inline_name[DNAME_INLINE_LEN];
};
void take_dentry_name_snapshot(struct name_snapshot *, struct dentry *);
void release_dentry_name_snapshot(struct name_snapshot *);
diff --git a/include/linux/dma-fence.h b/include/linux/dma-fence.h
index a5195a7..0a186c4 100644
--- a/include/linux/dma-fence.h
+++ b/include/linux/dma-fence.h
@@ -55,6 +55,7 @@
* of the time.
*
* DMA_FENCE_FLAG_SIGNALED_BIT - fence is already signaled
+ * DMA_FENCE_FLAG_TIMESTAMP_BIT - timestamp recorded for fence signaling
* DMA_FENCE_FLAG_ENABLE_SIGNAL_BIT - enable_signaling might have been called
* DMA_FENCE_FLAG_USER_BITS - start of the unused bits, can be used by the
* implementer of the fence for its own purposes. Can be used in different
@@ -84,6 +85,7 @@
enum dma_fence_flag_bits {
DMA_FENCE_FLAG_SIGNALED_BIT,
+ DMA_FENCE_FLAG_TIMESTAMP_BIT,
DMA_FENCE_FLAG_ENABLE_SIGNAL_BIT,
DMA_FENCE_FLAG_USER_BITS, /* must always be last member */
};
diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index 843ab86..03c0196 100644
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -157,16 +157,40 @@
* These three functions are only for dma allocator.
* Don't use them in device drivers.
*/
-int dma_alloc_from_coherent(struct device *dev, ssize_t size,
+int dma_alloc_from_dev_coherent(struct device *dev, ssize_t size,
dma_addr_t *dma_handle, void **ret);
-int dma_release_from_coherent(struct device *dev, int order, void *vaddr);
+int dma_release_from_dev_coherent(struct device *dev, int order, void *vaddr);
-int dma_mmap_from_coherent(struct device *dev, struct vm_area_struct *vma,
+int dma_mmap_from_dev_coherent(struct device *dev, struct vm_area_struct *vma,
void *cpu_addr, size_t size, int *ret);
+
+void *dma_alloc_from_global_coherent(ssize_t size, dma_addr_t *dma_handle);
+int dma_release_from_global_coherent(int order, void *vaddr);
+int dma_mmap_from_global_coherent(struct vm_area_struct *vma, void *cpu_addr,
+ size_t size, int *ret);
+
#else
-#define dma_alloc_from_coherent(dev, size, handle, ret) (0)
-#define dma_release_from_coherent(dev, order, vaddr) (0)
-#define dma_mmap_from_coherent(dev, vma, vaddr, order, ret) (0)
+#define dma_alloc_from_dev_coherent(dev, size, handle, ret) (0)
+#define dma_release_from_dev_coherent(dev, order, vaddr) (0)
+#define dma_mmap_from_dev_coherent(dev, vma, vaddr, order, ret) (0)
+
+static inline void *dma_alloc_from_global_coherent(ssize_t size,
+ dma_addr_t *dma_handle)
+{
+ return NULL;
+}
+
+static inline int dma_release_from_global_coherent(int order, void *vaddr)
+{
+ return 0;
+}
+
+static inline int dma_mmap_from_global_coherent(struct vm_area_struct *vma,
+ void *cpu_addr, size_t size,
+ int *ret)
+{
+ return 0;
+}
#endif /* CONFIG_HAVE_GENERIC_DMA_COHERENT */
#ifdef CONFIG_HAS_DMA
@@ -481,7 +505,7 @@
BUG_ON(!ops);
- if (dma_alloc_from_coherent(dev, size, dma_handle, &cpu_addr))
+ if (dma_alloc_from_dev_coherent(dev, size, dma_handle, &cpu_addr))
return cpu_addr;
if (!arch_dma_alloc_attrs(&dev, &flag))
@@ -503,7 +527,7 @@
BUG_ON(!ops);
WARN_ON(irqs_disabled());
- if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
+ if (dma_release_from_dev_coherent(dev, get_order(size), cpu_addr))
return;
if (!ops->free || !cpu_addr)
diff --git a/include/linux/eventpoll.h b/include/linux/eventpoll.h
index 6daf6d4..2f14ac7 100644
--- a/include/linux/eventpoll.h
+++ b/include/linux/eventpoll.h
@@ -14,6 +14,7 @@
#define _LINUX_EVENTPOLL_H
#include <uapi/linux/eventpoll.h>
+#include <uapi/linux/kcmp.h>
/* Forward declarations to avoid compiler errors */
@@ -22,6 +23,10 @@
#ifdef CONFIG_EPOLL
+#ifdef CONFIG_CHECKPOINT_RESTORE
+struct file *get_epoll_tfile_raw_ptr(struct file *file, int tfd, unsigned long toff);
+#endif
+
/* Used to initialize the epoll bits inside the "struct file" */
static inline void eventpoll_init_file(struct file *file)
{
diff --git a/include/linux/flat.h b/include/linux/flat.h
index 2c1eb15..7d542df 100644
--- a/include/linux/flat.h
+++ b/include/linux/flat.h
@@ -9,8 +9,8 @@
#ifndef _LINUX_FLAT_H
#define _LINUX_FLAT_H
-#include <asm/flat.h>
#include <uapi/linux/flat.h>
+#include <asm/flat.h>
/*
* While it would be nice to keep this header clean, users of older
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 78e1dbb..6e1fd5d 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -296,7 +296,7 @@
void *private;
int ki_flags;
enum rw_hint ki_hint;
-};
+} __randomize_layout;
static inline bool is_sync_kiocb(struct kiocb *kiocb)
{
@@ -404,7 +404,7 @@
struct list_head private_list; /* ditto */
void *private_data; /* ditto */
errseq_t wb_err;
-} __attribute__((aligned(sizeof(long))));
+} __attribute__((aligned(sizeof(long)))) __randomize_layout;
/*
* On most architectures that alignment is already the case; but
* must be enforced here for CRIS, to let the least significant bit
@@ -447,7 +447,7 @@
int bd_fsfreeze_count;
/* Mutex for freeze */
struct mutex bd_fsfreeze_mutex;
-};
+} __randomize_layout;
/*
* Radix-tree tags, for tagging dirty and writeback pages within the pagecache
@@ -666,7 +666,7 @@
#endif
void *i_private; /* fs or device private pointer */
-};
+} __randomize_layout;
static inline unsigned int i_blocksize(const struct inode *node)
{
@@ -883,7 +883,8 @@
#endif /* #ifdef CONFIG_EPOLL */
struct address_space *f_mapping;
errseq_t f_wb_err;
-} __attribute__((aligned(4))); /* lest something weird decides that 2 is OK */
+} __randomize_layout
+ __attribute__((aligned(4))); /* lest something weird decides that 2 is OK */
struct file_handle {
__u32 handle_bytes;
@@ -1020,7 +1021,7 @@
int state; /* state of grant or error if -ve */
} afs;
} fl_u;
-};
+} __randomize_layout;
struct file_lock_context {
spinlock_t flc_lock;
@@ -1364,11 +1365,6 @@
*/
char *s_subtype;
- /*
- * Saved mount options for lazy filesystems using
- * generic_show_options()
- */
- char __rcu *s_options;
const struct dentry_operations *s_d_op; /* default d_op for dentries */
/*
@@ -1417,7 +1413,7 @@
spinlock_t s_inode_wblist_lock;
struct list_head s_inodes_wb; /* writeback inodes */
-};
+} __randomize_layout;
/* Helper functions so that in most cases filesystems will
* not need to deal directly with kuid_t and kgid_t and can
@@ -1703,7 +1699,7 @@
u64);
ssize_t (*dedupe_file_range)(struct file *, u64, u64, struct file *,
u64);
-};
+} __randomize_layout;
struct inode_operations {
struct dentry * (*lookup) (struct inode *,struct dentry *, unsigned int);
@@ -1955,6 +1951,9 @@
* wb stat updates to grab mapping->tree_lock. See
* inode_switch_wb_work_fn() for details.
*
+ * I_OVL_INUSE Used by overlayfs to get exclusive ownership on upper
+ * and work dirs among overlayfs mounts.
+ *
* Q: What is the difference between I_WILL_FREE and I_FREEING?
*/
#define I_DIRTY_SYNC (1 << 0)
@@ -1975,6 +1974,7 @@
#define __I_DIRTY_TIME_EXPIRED 12
#define I_DIRTY_TIME_EXPIRED (1 << __I_DIRTY_TIME_EXPIRED)
#define I_WB_SWITCH (1 << 13)
+#define I_OVL_INUSE (1 << 14)
#define I_DIRTY (I_DIRTY_SYNC | I_DIRTY_DATASYNC | I_DIRTY_PAGES)
#define I_DIRTY_ALL (I_DIRTY | I_DIRTY_TIME)
@@ -3042,7 +3042,7 @@
struct fiemap_extent_info *fieinfo, u64 start,
u64 len, get_block_t *get_block);
-extern void get_filesystem(struct file_system_type *fs);
+extern struct file_system_type *get_filesystem(struct file_system_type *fs);
extern void put_filesystem(struct file_system_type *fs);
extern struct file_system_type *get_fs_type(const char *name);
extern struct super_block *get_super(struct block_device *);
@@ -3119,10 +3119,6 @@
extern int file_update_time(struct file *file);
-extern int generic_show_options(struct seq_file *m, struct dentry *root);
-extern void save_mount_options(struct super_block *sb, char *options);
-extern void replace_mount_options(struct super_block *sb, char *options);
-
static inline bool io_is_direct(struct file *filp)
{
return (filp->f_flags & O_DIRECT) || IS_DAX(filp->f_mapping->host);
diff --git a/include/linux/fs_struct.h b/include/linux/fs_struct.h
index 0efc3e6..7a02624 100644
--- a/include/linux/fs_struct.h
+++ b/include/linux/fs_struct.h
@@ -12,7 +12,7 @@
int umask;
int in_exec;
struct path root, pwd;
-};
+} __randomize_layout;
extern struct kmem_cache *fs_cachep;
diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h
index 5857390..6383115 100644
--- a/include/linux/ftrace.h
+++ b/include/linux/ftrace.h
@@ -145,8 +145,8 @@
#ifdef CONFIG_DYNAMIC_FTRACE
/* The hash used to know what functions callbacks trace */
struct ftrace_ops_hash {
- struct ftrace_hash *notrace_hash;
- struct ftrace_hash *filter_hash;
+ struct ftrace_hash __rcu *notrace_hash;
+ struct ftrace_hash __rcu *filter_hash;
struct mutex regex_lock;
};
@@ -168,7 +168,7 @@
*/
struct ftrace_ops {
ftrace_func_t func;
- struct ftrace_ops *next;
+ struct ftrace_ops __rcu *next;
unsigned long flags;
void *private;
ftrace_func_t saved_func;
diff --git a/include/linux/fwnode.h b/include/linux/fwnode.h
index 9ab3754..50893a1 100644
--- a/include/linux/fwnode.h
+++ b/include/linux/fwnode.h
@@ -99,6 +99,10 @@
(fwnode ? (fwnode_has_op(fwnode, op) ? \
(fwnode)->ops->op(fwnode, ## __VA_ARGS__) : -ENXIO) : \
-EINVAL)
+#define fwnode_call_bool_op(fwnode, op, ...) \
+ (fwnode ? (fwnode_has_op(fwnode, op) ? \
+ (fwnode)->ops->op(fwnode, ## __VA_ARGS__) : false) : \
+ false)
#define fwnode_call_ptr_op(fwnode, op, ...) \
(fwnode_has_op(fwnode, op) ? \
(fwnode)->ops->op(fwnode, ## __VA_ARGS__) : NULL)
diff --git a/include/linux/gfp.h b/include/linux/gfp.h
index 4c6656f..bcfb9f7 100644
--- a/include/linux/gfp.h
+++ b/include/linux/gfp.h
@@ -25,7 +25,7 @@
#define ___GFP_FS 0x80u
#define ___GFP_COLD 0x100u
#define ___GFP_NOWARN 0x200u
-#define ___GFP_REPEAT 0x400u
+#define ___GFP_RETRY_MAYFAIL 0x400u
#define ___GFP_NOFAIL 0x800u
#define ___GFP_NORETRY 0x1000u
#define ___GFP_MEMALLOC 0x2000u
@@ -136,26 +136,56 @@
*
* __GFP_RECLAIM is shorthand to allow/forbid both direct and kswapd reclaim.
*
- * __GFP_REPEAT: Try hard to allocate the memory, but the allocation attempt
- * _might_ fail. This depends upon the particular VM implementation.
+ * The default allocator behavior depends on the request size. We have a concept
+ * of so called costly allocations (with order > PAGE_ALLOC_COSTLY_ORDER).
+ * !costly allocations are too essential to fail so they are implicitly
+ * non-failing by default (with some exceptions like OOM victims might fail so
+ * the caller still has to check for failures) while costly requests try to be
+ * not disruptive and back off even without invoking the OOM killer.
+ * The following three modifiers might be used to override some of these
+ * implicit rules
+ *
+ * __GFP_NORETRY: The VM implementation will try only very lightweight
+ * memory direct reclaim to get some memory under memory pressure (thus
+ * it can sleep). It will avoid disruptive actions like OOM killer. The
+ * caller must handle the failure which is quite likely to happen under
+ * heavy memory pressure. The flag is suitable when failure can easily be
+ * handled at small cost, such as reduced throughput
+ *
+ * __GFP_RETRY_MAYFAIL: The VM implementation will retry memory reclaim
+ * procedures that have previously failed if there is some indication
+ * that progress has been made else where. It can wait for other
+ * tasks to attempt high level approaches to freeing memory such as
+ * compaction (which removes fragmentation) and page-out.
+ * There is still a definite limit to the number of retries, but it is
+ * a larger limit than with __GFP_NORETRY.
+ * Allocations with this flag may fail, but only when there is
+ * genuinely little unused memory. While these allocations do not
+ * directly trigger the OOM killer, their failure indicates that
+ * the system is likely to need to use the OOM killer soon. The
+ * caller must handle failure, but can reasonably do so by failing
+ * a higher-level request, or completing it only in a much less
+ * efficient manner.
+ * If the allocation does fail, and the caller is in a position to
+ * free some non-essential memory, doing so could benefit the system
+ * as a whole.
*
* __GFP_NOFAIL: The VM implementation _must_ retry infinitely: the caller
- * cannot handle allocation failures. New users should be evaluated carefully
- * (and the flag should be used only when there is no reasonable failure
- * policy) but it is definitely preferable to use the flag rather than
- * opencode endless loop around allocator.
- *
- * __GFP_NORETRY: The VM implementation must not retry indefinitely and will
- * return NULL when direct reclaim and memory compaction have failed to allow
- * the allocation to succeed. The OOM killer is not called with the current
- * implementation.
+ * cannot handle allocation failures. The allocation could block
+ * indefinitely but will never return with failure. Testing for
+ * failure is pointless.
+ * New users should be evaluated carefully (and the flag should be
+ * used only when there is no reasonable failure policy) but it is
+ * definitely preferable to use the flag rather than opencode endless
+ * loop around allocator.
+ * Using this flag for costly allocations is _highly_ discouraged.
*/
#define __GFP_IO ((__force gfp_t)___GFP_IO)
#define __GFP_FS ((__force gfp_t)___GFP_FS)
#define __GFP_DIRECT_RECLAIM ((__force gfp_t)___GFP_DIRECT_RECLAIM) /* Caller can reclaim */
#define __GFP_KSWAPD_RECLAIM ((__force gfp_t)___GFP_KSWAPD_RECLAIM) /* kswapd can wake */
#define __GFP_RECLAIM ((__force gfp_t)(___GFP_DIRECT_RECLAIM|___GFP_KSWAPD_RECLAIM))
-#define __GFP_REPEAT ((__force gfp_t)___GFP_REPEAT)
+#define __GFP_RETRY_MAYFAIL ((__force gfp_t)___GFP_RETRY_MAYFAIL)
#define __GFP_NOFAIL ((__force gfp_t)___GFP_NOFAIL)
#define __GFP_NORETRY ((__force gfp_t)___GFP_NORETRY)
diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index 8d9fe13..0ed8e41 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -268,6 +268,9 @@
spinlock_t stat_lock;
struct hstate *hstate;
struct hugepage_subpool *spool;
+ kuid_t uid;
+ kgid_t gid;
+ umode_t mode;
};
static inline struct hugetlbfs_sb_info *HUGETLBFS_SB(struct super_block *sb)
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 72d0ece..00ca5b8 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -295,6 +295,8 @@
{
return client->slave_cb(client, event, val);
}
+#else
+static inline bool i2c_detect_slave_mode(struct device *dev) { return false; }
#endif
/**
diff --git a/include/linux/i2c/i2c-sh_mobile.h b/include/linux/i2c/i2c-sh_mobile.h
deleted file mode 100644
index 06e3089..0000000
--- a/include/linux/i2c/i2c-sh_mobile.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef __I2C_SH_MOBILE_H__
-#define __I2C_SH_MOBILE_H__
-
-#include <linux/platform_device.h>
-
-struct i2c_sh_mobile_platform_data {
- unsigned long bus_speed;
- unsigned int clks_per_count;
-};
-
-#endif /* __I2C_SH_MOBILE_H__ */
diff --git a/include/linux/intel-svm.h b/include/linux/intel-svm.h
index 3c25794..99bc5b3 100644
--- a/include/linux/intel-svm.h
+++ b/include/linux/intel-svm.h
@@ -102,6 +102,21 @@
*/
extern int intel_svm_unbind_mm(struct device *dev, int pasid);
+/**
+ * intel_svm_is_pasid_valid() - check if pasid is valid
+ * @dev: Device for which PASID was allocated
+ * @pasid: PASID value to be checked
+ *
+ * This function checks if the specified pasid is still valid. A
+ * valid pasid means the backing mm is still having a valid user.
+ * For kernel callers init_mm is always valid. for other mm, if mm->mm_users
+ * is non-zero, it is valid.
+ *
+ * returns -EINVAL if invalid pasid, 0 if pasid ref count is invalid
+ * 1 if pasid is valid.
+ */
+extern int intel_svm_is_pasid_valid(struct device *dev, int pasid);
+
#else /* CONFIG_INTEL_IOMMU_SVM */
static inline int intel_svm_bind_mm(struct device *dev, int *pasid,
@@ -114,6 +129,11 @@
{
BUG();
}
+
+static int intel_svm_is_pasid_valid(struct device *dev, int pasid)
+{
+ return -EINVAL;
+}
#endif /* CONFIG_INTEL_IOMMU_SVM */
#define intel_svm_available(dev) (!intel_svm_bind_mm((dev), NULL, 0, NULL))
diff --git a/include/linux/ipc.h b/include/linux/ipc.h
index 71fd92d..fadd579 100644
--- a/include/linux/ipc.h
+++ b/include/linux/ipc.h
@@ -20,6 +20,9 @@
umode_t mode;
unsigned long seq;
void *security;
-} ____cacheline_aligned_in_smp;
+
+ struct rcu_head rcu;
+ atomic_t refcount;
+} ____cacheline_aligned_in_smp __randomize_layout;
#endif /* _LINUX_IPC_H */
diff --git a/include/linux/ipc_namespace.h b/include/linux/ipc_namespace.h
index 848e579..65327ee 100644
--- a/include/linux/ipc_namespace.h
+++ b/include/linux/ipc_namespace.h
@@ -61,7 +61,7 @@
struct ucounts *ucounts;
struct ns_common ns;
-};
+} __randomize_layout;
extern struct ipc_namespace init_ipc_ns;
extern spinlock_t mq_lock;
diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h
index e1b4429..474d6bb 100644
--- a/include/linux/ipv6.h
+++ b/include/linux/ipv6.h
@@ -128,6 +128,7 @@
#define IP6SKB_FRAGMENTED 16
#define IP6SKB_HOPBYHOP 32
#define IP6SKB_L3SLAVE 64
+#define IP6SKB_JUMBOGRAM 128
};
#if defined(CONFIG_NET_L3_MASTER_DEV)
@@ -152,6 +153,11 @@
return l3_slave ? skb->skb_iif : IP6CB(skb)->iif;
}
+static inline bool inet6_is_jumbogram(const struct sk_buff *skb)
+{
+ return !!(IP6CB(skb)->flags & IP6SKB_JUMBOGRAM);
+}
+
/* can not be used in TCP layer after tcp_v6_fill_cb */
static inline bool inet6_exact_dif_match(struct net *net, struct sk_buff *skb)
{
diff --git a/include/linux/irq.h b/include/linux/irq.h
index 00db35b..d2d54379 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -388,7 +388,12 @@
* @irq_mask_ack: ack and mask an interrupt source
* @irq_unmask: unmask an interrupt source
* @irq_eoi: end of interrupt
- * @irq_set_affinity: set the CPU affinity on SMP machines
+ * @irq_set_affinity: Set the CPU affinity on SMP machines. If the force
+ * argument is true, it tells the driver to
+ * unconditionally apply the affinity setting. Sanity
+ * checks against the supplied affinity mask are not
+ * required. This is used for CPU hotplug where the
+ * target CPU is not yet set in the cpu_online_mask.
* @irq_retrigger: resend an IRQ to the CPU
* @irq_set_type: set the flow type (IRQ_TYPE_LEVEL/etc.) of an IRQ
* @irq_set_wake: enable/disable power-management wake-on of an IRQ
diff --git a/include/linux/jhash.h b/include/linux/jhash.h
index 348c6f4..8037850 100644
--- a/include/linux/jhash.h
+++ b/include/linux/jhash.h
@@ -85,19 +85,18 @@
k += 12;
}
/* Last block: affect all 32 bits of (c) */
- /* All the case statements fall through */
switch (length) {
- case 12: c += (u32)k[11]<<24;
- case 11: c += (u32)k[10]<<16;
- case 10: c += (u32)k[9]<<8;
- case 9: c += k[8];
- case 8: b += (u32)k[7]<<24;
- case 7: b += (u32)k[6]<<16;
- case 6: b += (u32)k[5]<<8;
- case 5: b += k[4];
- case 4: a += (u32)k[3]<<24;
- case 3: a += (u32)k[2]<<16;
- case 2: a += (u32)k[1]<<8;
+ case 12: c += (u32)k[11]<<24; /* fall through */
+ case 11: c += (u32)k[10]<<16; /* fall through */
+ case 10: c += (u32)k[9]<<8; /* fall through */
+ case 9: c += k[8]; /* fall through */
+ case 8: b += (u32)k[7]<<24; /* fall through */
+ case 7: b += (u32)k[6]<<16; /* fall through */
+ case 6: b += (u32)k[5]<<8; /* fall through */
+ case 5: b += k[4]; /* fall through */
+ case 4: a += (u32)k[3]<<24; /* fall through */
+ case 3: a += (u32)k[2]<<16; /* fall through */
+ case 2: a += (u32)k[1]<<8; /* fall through */
case 1: a += k[0];
__jhash_final(a, b, c);
case 0: /* Nothing left to add */
@@ -131,10 +130,10 @@
k += 3;
}
- /* Handle the last 3 u32's: all the case statements fall through */
+ /* Handle the last 3 u32's */
switch (length) {
- case 3: c += k[2];
- case 2: b += k[1];
+ case 3: c += k[2]; /* fall through */
+ case 2: b += k[1]; /* fall through */
case 1: a += k[0];
__jhash_final(a, b, c);
case 0: /* Nothing left to add */
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 1c91f26..bd6d96c 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -11,6 +11,7 @@
#include <linux/log2.h>
#include <linux/typecheck.h>
#include <linux/printk.h>
+#include <linux/build_bug.h>
#include <asm/byteorder.h>
#include <uapi/linux/kernel.h>
@@ -854,9 +855,12 @@
* @member: the name of the member within the struct.
*
*/
-#define container_of(ptr, type, member) ({ \
- const typeof( ((type *)0)->member ) *__mptr = (ptr); \
- (type *)( (char *)__mptr - offsetof(type,member) );})
+#define container_of(ptr, type, member) ({ \
+ void *__mptr = (void *)(ptr); \
+ BUILD_BUG_ON_MSG(!__same_type(*(ptr), ((type *)0)->member) && \
+ !__same_type(*(ptr), void), \
+ "pointer type mismatch in container_of()"); \
+ ((type *)(__mptr - offsetof(type, member))); })
/* Rebuild everything on CONFIG_FTRACE_MCOUNT_RECORD */
#ifdef CONFIG_FTRACE_MCOUNT_RECORD
diff --git a/include/linux/kexec.h b/include/linux/kexec.h
index 6588841..dd056fa 100644
--- a/include/linux/kexec.h
+++ b/include/linux/kexec.h
@@ -172,6 +172,7 @@
unsigned long start;
struct page *control_code_page;
struct page *swap_page;
+ void *vmcoreinfo_data_copy; /* locates in the crash memory */
unsigned long nr_segments;
struct kexec_segment segment[KEXEC_SEGMENT_MAX];
@@ -241,6 +242,7 @@
int kexec_should_crash(struct task_struct *);
int kexec_crash_loaded(void);
void crash_save_cpu(struct pt_regs *regs, int cpu);
+extern int kimage_crash_copy_vmcoreinfo(struct kimage *image);
extern struct kimage *kexec_image;
extern struct kimage *kexec_crash_image;
diff --git a/include/linux/key-type.h b/include/linux/key-type.h
index 8496cf6..9520fc3 100644
--- a/include/linux/key-type.h
+++ b/include/linux/key-type.h
@@ -45,7 +45,7 @@
size_t datalen; /* Raw datalen */
size_t quotalen; /* Quota length for proposed payload */
time_t expiry; /* Expiry time of key */
-};
+} __randomize_layout;
typedef int (*request_key_actor_t)(struct key_construction *key,
const char *op, void *aux);
@@ -158,7 +158,7 @@
/* internal fields */
struct list_head link; /* link in types list */
struct lock_class_key lock_class; /* key->sem lock class */
-};
+} __randomize_layout;
extern struct key_type key_type_keyring;
diff --git a/include/linux/kmod.h b/include/linux/kmod.h
index c4e441e..655082c 100644
--- a/include/linux/kmod.h
+++ b/include/linux/kmod.h
@@ -64,7 +64,7 @@
int (*init)(struct subprocess_info *info, struct cred *new);
void (*cleanup)(struct subprocess_info *info);
void *data;
-};
+} __randomize_layout;
extern int
call_usermodehelper(const char *path, char **argv, char **envp, int wait);
diff --git a/include/linux/kobject.h b/include/linux/kobject.h
index eeab34b..4d800c7 100644
--- a/include/linux/kobject.h
+++ b/include/linux/kobject.h
@@ -172,7 +172,7 @@
spinlock_t list_lock;
struct kobject kobj;
const struct kset_uevent_ops *uevent_ops;
-};
+} __randomize_layout;
extern void kset_init(struct kset *kset);
extern int __must_check kset_register(struct kset *kset);
diff --git a/include/linux/kthread.h b/include/linux/kthread.h
index 4fec8b7..82e197e 100644
--- a/include/linux/kthread.h
+++ b/include/linux/kthread.h
@@ -15,7 +15,7 @@
* @threadfn: the function to run in the thread
* @data: data pointer for @threadfn()
* @namefmt: printf-style format string for the thread name
- * @...: arguments for @namefmt.
+ * @arg...: arguments for @namefmt.
*
* This macro will create a kthread on the current node, leaving it in
* the stopped state. This is just a helper for kthread_create_on_node();
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index 0b50e7b..21a6fd6 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -234,7 +234,7 @@
int guest_fpu_loaded, guest_xcr0_loaded;
struct swait_queue_head wq;
- struct pid *pid;
+ struct pid __rcu *pid;
int sigset_active;
sigset_t sigset;
struct kvm_vcpu_stat stat;
@@ -390,7 +390,7 @@
spinlock_t mmu_lock;
struct mutex slots_lock;
struct mm_struct *mm; /* userspace tied to this vm */
- struct kvm_memslots *memslots[KVM_ADDRESS_SPACE_NUM];
+ struct kvm_memslots __rcu *memslots[KVM_ADDRESS_SPACE_NUM];
struct kvm_vcpu *vcpus[KVM_MAX_VCPUS];
/*
@@ -404,7 +404,7 @@
int last_boosted_vcpu;
struct list_head vm_list;
struct mutex lock;
- struct kvm_io_bus *buses[KVM_NR_BUSES];
+ struct kvm_io_bus __rcu *buses[KVM_NR_BUSES];
#ifdef CONFIG_HAVE_KVM_EVENTFD
struct {
spinlock_t lock;
@@ -445,6 +445,7 @@
struct kvm_stat_data **debugfs_stat_data;
struct srcu_struct srcu;
struct srcu_struct irq_srcu;
+ pid_t userspace_pid;
};
#define kvm_err(fmt, ...) \
@@ -473,6 +474,13 @@
#define vcpu_err(vcpu, fmt, ...) \
kvm_err("vcpu%i " fmt, (vcpu)->vcpu_id, ## __VA_ARGS__)
+static inline struct kvm_io_bus *kvm_get_bus(struct kvm *kvm, enum kvm_bus idx)
+{
+ return srcu_dereference_check(kvm->buses[idx], &kvm->srcu,
+ lockdep_is_held(&kvm->slots_lock) ||
+ !refcount_read(&kvm->users_count));
+}
+
static inline struct kvm_vcpu *kvm_get_vcpu(struct kvm *kvm, int i)
{
/* Pairs with smp_wmb() in kvm_vm_ioctl_create_vcpu, in case
@@ -562,9 +570,9 @@
static inline struct kvm_memslots *__kvm_memslots(struct kvm *kvm, int as_id)
{
- return rcu_dereference_check(kvm->memslots[as_id],
- srcu_read_lock_held(&kvm->srcu)
- || lockdep_is_held(&kvm->slots_lock));
+ return srcu_dereference_check(kvm->memslots[as_id], &kvm->srcu,
+ lockdep_is_held(&kvm->slots_lock) ||
+ !refcount_read(&kvm->users_count));
}
static inline struct kvm_memslots *kvm_memslots(struct kvm *kvm)
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 55de3da..931c32f 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -435,7 +435,7 @@
ATA_HORKAGE_NOLPM = (1 << 20), /* don't use LPM */
ATA_HORKAGE_WD_BROKEN_LPM = (1 << 21), /* some WDs have broken LPM */
ATA_HORKAGE_ZERO_AFTER_TRIM = (1 << 22),/* guarantees zero after trim */
- ATA_HORKAGE_NO_NCQ_LOG = (1 << 23), /* don't use NCQ for log read */
+ ATA_HORKAGE_NO_DMA_LOG = (1 << 23), /* don't use DMA for log read */
ATA_HORKAGE_NOTRIM = (1 << 24), /* don't use TRIM */
ATA_HORKAGE_MAX_SEC_1024 = (1 << 25), /* Limit max sects to 1024 */
diff --git a/include/linux/llist.h b/include/linux/llist.h
index d117381..1957635 100644
--- a/include/linux/llist.h
+++ b/include/linux/llist.h
@@ -93,6 +93,23 @@
container_of(ptr, type, member)
/**
+ * member_address_is_nonnull - check whether the member address is not NULL
+ * @ptr: the object pointer (struct type * that contains the llist_node)
+ * @member: the name of the llist_node within the struct.
+ *
+ * This macro is conceptually the same as
+ * &ptr->member != NULL
+ * but it works around the fact that compilers can decide that taking a member
+ * address is never a NULL pointer.
+ *
+ * Real objects that start at a high address and have a member at NULL are
+ * unlikely to exist, but such pointers may be returned e.g. by the
+ * container_of() macro.
+ */
+#define member_address_is_nonnull(ptr, member) \
+ ((uintptr_t)(ptr) + offsetof(typeof(*(ptr)), member) != 0)
+
+/**
* llist_for_each - iterate over some deleted entries of a lock-less list
* @pos: the &struct llist_node to use as a loop cursor
* @node: the first entry of deleted list entries
@@ -145,7 +162,7 @@
*/
#define llist_for_each_entry(pos, node, member) \
for ((pos) = llist_entry((node), typeof(*(pos)), member); \
- &(pos)->member != NULL; \
+ member_address_is_nonnull(pos, member); \
(pos) = llist_entry((pos)->member.next, typeof(*(pos)), member))
/**
@@ -167,7 +184,7 @@
*/
#define llist_for_each_entry_safe(pos, n, node, member) \
for (pos = llist_entry((node), typeof(*pos), member); \
- &pos->member != NULL && \
+ member_address_is_nonnull(pos, member) && \
(n = llist_entry(pos->member.next, typeof(*n), member), true); \
pos = n)
diff --git a/include/linux/lockd/lockd.h b/include/linux/lockd/lockd.h
index 41f7b6a..3eca677 100644
--- a/include/linux/lockd/lockd.h
+++ b/include/linux/lockd/lockd.h
@@ -192,9 +192,9 @@
* Global variables
*/
extern const struct rpc_program nlm_program;
-extern struct svc_procedure nlmsvc_procedures[];
+extern const struct svc_procedure nlmsvc_procedures[];
#ifdef CONFIG_LOCKD_V4
-extern struct svc_procedure nlmsvc_procedures4[];
+extern const struct svc_procedure nlmsvc_procedures4[];
#endif
extern int nlmsvc_grace_period;
extern unsigned long nlmsvc_timeout;
diff --git a/include/linux/lockd/xdr.h b/include/linux/lockd/xdr.h
index d39ed1c..7acbecc 100644
--- a/include/linux/lockd/xdr.h
+++ b/include/linux/lockd/xdr.h
@@ -95,19 +95,19 @@
*/
#define NLMSVC_XDRSIZE sizeof(struct nlm_args)
-int nlmsvc_decode_testargs(struct svc_rqst *, __be32 *, struct nlm_args *);
-int nlmsvc_encode_testres(struct svc_rqst *, __be32 *, struct nlm_res *);
-int nlmsvc_decode_lockargs(struct svc_rqst *, __be32 *, struct nlm_args *);
-int nlmsvc_decode_cancargs(struct svc_rqst *, __be32 *, struct nlm_args *);
-int nlmsvc_decode_unlockargs(struct svc_rqst *, __be32 *, struct nlm_args *);
-int nlmsvc_encode_res(struct svc_rqst *, __be32 *, struct nlm_res *);
-int nlmsvc_decode_res(struct svc_rqst *, __be32 *, struct nlm_res *);
-int nlmsvc_encode_void(struct svc_rqst *, __be32 *, void *);
-int nlmsvc_decode_void(struct svc_rqst *, __be32 *, void *);
-int nlmsvc_decode_shareargs(struct svc_rqst *, __be32 *, struct nlm_args *);
-int nlmsvc_encode_shareres(struct svc_rqst *, __be32 *, struct nlm_res *);
-int nlmsvc_decode_notify(struct svc_rqst *, __be32 *, struct nlm_args *);
-int nlmsvc_decode_reboot(struct svc_rqst *, __be32 *, struct nlm_reboot *);
+int nlmsvc_decode_testargs(struct svc_rqst *, __be32 *);
+int nlmsvc_encode_testres(struct svc_rqst *, __be32 *);
+int nlmsvc_decode_lockargs(struct svc_rqst *, __be32 *);
+int nlmsvc_decode_cancargs(struct svc_rqst *, __be32 *);
+int nlmsvc_decode_unlockargs(struct svc_rqst *, __be32 *);
+int nlmsvc_encode_res(struct svc_rqst *, __be32 *);
+int nlmsvc_decode_res(struct svc_rqst *, __be32 *);
+int nlmsvc_encode_void(struct svc_rqst *, __be32 *);
+int nlmsvc_decode_void(struct svc_rqst *, __be32 *);
+int nlmsvc_decode_shareargs(struct svc_rqst *, __be32 *);
+int nlmsvc_encode_shareres(struct svc_rqst *, __be32 *);
+int nlmsvc_decode_notify(struct svc_rqst *, __be32 *);
+int nlmsvc_decode_reboot(struct svc_rqst *, __be32 *);
/*
int nlmclt_encode_testargs(struct rpc_rqst *, u32 *, struct nlm_args *);
int nlmclt_encode_lockargs(struct rpc_rqst *, u32 *, struct nlm_args *);
diff --git a/include/linux/lockd/xdr4.h b/include/linux/lockd/xdr4.h
index e58c88b..bf16456 100644
--- a/include/linux/lockd/xdr4.h
+++ b/include/linux/lockd/xdr4.h
@@ -23,19 +23,19 @@
-int nlm4svc_decode_testargs(struct svc_rqst *, __be32 *, struct nlm_args *);
-int nlm4svc_encode_testres(struct svc_rqst *, __be32 *, struct nlm_res *);
-int nlm4svc_decode_lockargs(struct svc_rqst *, __be32 *, struct nlm_args *);
-int nlm4svc_decode_cancargs(struct svc_rqst *, __be32 *, struct nlm_args *);
-int nlm4svc_decode_unlockargs(struct svc_rqst *, __be32 *, struct nlm_args *);
-int nlm4svc_encode_res(struct svc_rqst *, __be32 *, struct nlm_res *);
-int nlm4svc_decode_res(struct svc_rqst *, __be32 *, struct nlm_res *);
-int nlm4svc_encode_void(struct svc_rqst *, __be32 *, void *);
-int nlm4svc_decode_void(struct svc_rqst *, __be32 *, void *);
-int nlm4svc_decode_shareargs(struct svc_rqst *, __be32 *, struct nlm_args *);
-int nlm4svc_encode_shareres(struct svc_rqst *, __be32 *, struct nlm_res *);
-int nlm4svc_decode_notify(struct svc_rqst *, __be32 *, struct nlm_args *);
-int nlm4svc_decode_reboot(struct svc_rqst *, __be32 *, struct nlm_reboot *);
+int nlm4svc_decode_testargs(struct svc_rqst *, __be32 *);
+int nlm4svc_encode_testres(struct svc_rqst *, __be32 *);
+int nlm4svc_decode_lockargs(struct svc_rqst *, __be32 *);
+int nlm4svc_decode_cancargs(struct svc_rqst *, __be32 *);
+int nlm4svc_decode_unlockargs(struct svc_rqst *, __be32 *);
+int nlm4svc_encode_res(struct svc_rqst *, __be32 *);
+int nlm4svc_decode_res(struct svc_rqst *, __be32 *);
+int nlm4svc_encode_void(struct svc_rqst *, __be32 *);
+int nlm4svc_decode_void(struct svc_rqst *, __be32 *);
+int nlm4svc_decode_shareargs(struct svc_rqst *, __be32 *);
+int nlm4svc_encode_shareres(struct svc_rqst *, __be32 *);
+int nlm4svc_decode_notify(struct svc_rqst *, __be32 *);
+int nlm4svc_decode_reboot(struct svc_rqst *, __be32 *);
/*
int nlmclt_encode_testargs(struct rpc_rqst *, u32 *, struct nlm_args *);
int nlmclt_encode_lockargs(struct rpc_rqst *, u32 *, struct nlm_args *);
diff --git a/include/linux/lsm_hooks.h b/include/linux/lsm_hooks.h
index 7a86925..3a90feb 100644
--- a/include/linux/lsm_hooks.h
+++ b/include/linux/lsm_hooks.h
@@ -1912,7 +1912,7 @@
struct list_head audit_rule_match;
struct list_head audit_rule_free;
#endif /* CONFIG_AUDIT */
-};
+} __randomize_layout;
/*
* Security module hook list structure.
@@ -1923,7 +1923,7 @@
struct list_head *head;
union security_list_options hook;
char *lsm;
-};
+} __randomize_layout;
/*
* Initializing a security_hook_list structure takes
diff --git a/include/linux/migrate.h b/include/linux/migrate.h
index 4634da5..3e0d405 100644
--- a/include/linux/migrate.h
+++ b/include/linux/migrate.h
@@ -34,7 +34,7 @@
static inline struct page *new_page_nodemask(struct page *page,
int preferred_nid, nodemask_t *nodemask)
{
- gfp_t gfp_mask = GFP_USER | __GFP_MOVABLE;
+ gfp_t gfp_mask = GFP_USER | __GFP_MOVABLE | __GFP_RETRY_MAYFAIL;
if (PageHuge(page))
return alloc_huge_page_nodemask(page_hstate(compound_head(page)),
diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h
index d5bed08..aad5d81 100644
--- a/include/linux/mlx4/device.h
+++ b/include/linux/mlx4/device.h
@@ -1068,7 +1068,7 @@
}
int mlx4_buf_alloc(struct mlx4_dev *dev, int size, int max_direct,
- struct mlx4_buf *buf, gfp_t gfp);
+ struct mlx4_buf *buf);
void mlx4_buf_free(struct mlx4_dev *dev, int size, struct mlx4_buf *buf);
static inline void *mlx4_buf_offset(struct mlx4_buf *buf, int offset)
{
@@ -1105,10 +1105,9 @@
int mlx4_write_mtt(struct mlx4_dev *dev, struct mlx4_mtt *mtt,
int start_index, int npages, u64 *page_list);
int mlx4_buf_write_mtt(struct mlx4_dev *dev, struct mlx4_mtt *mtt,
- struct mlx4_buf *buf, gfp_t gfp);
+ struct mlx4_buf *buf);
-int mlx4_db_alloc(struct mlx4_dev *dev, struct mlx4_db *db, int order,
- gfp_t gfp);
+int mlx4_db_alloc(struct mlx4_dev *dev, struct mlx4_db *db, int order);
void mlx4_db_free(struct mlx4_dev *dev, struct mlx4_db *db);
int mlx4_alloc_hwq_res(struct mlx4_dev *dev, struct mlx4_hwq_resources *wqres,
@@ -1124,8 +1123,7 @@
int *base, u8 flags);
void mlx4_qp_release_range(struct mlx4_dev *dev, int base_qpn, int cnt);
-int mlx4_qp_alloc(struct mlx4_dev *dev, int qpn, struct mlx4_qp *qp,
- gfp_t gfp);
+int mlx4_qp_alloc(struct mlx4_dev *dev, int qpn, struct mlx4_qp *qp);
void mlx4_qp_free(struct mlx4_dev *dev, struct mlx4_qp *qp);
int mlx4_srq_alloc(struct mlx4_dev *dev, u32 pdn, u32 cqn, u16 xrcdn,
diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h
index 87869c0..3030121 100644
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h
@@ -7749,8 +7749,10 @@
};
struct mlx5_ifc_mcam_enhanced_features_bits {
- u8 reserved_at_0[0x7f];
+ u8 reserved_at_0[0x7d];
+ u8 mtpps_enh_out_per_adj[0x1];
+ u8 mtpps_fs[0x1];
u8 pcie_performance_group[0x1];
};
@@ -8159,7 +8161,8 @@
u8 reserved_at_78[0x4];
u8 cap_pin_4_mode[0x4];
- u8 reserved_at_80[0x80];
+ u8 field_select[0x20];
+ u8 reserved_at_a0[0x60];
u8 enable[0x1];
u8 reserved_at_101[0xb];
@@ -8174,8 +8177,9 @@
u8 out_pulse_duration[0x10];
u8 out_periodic_adjustment[0x10];
+ u8 enhanced_out_periodic_adjustment[0x20];
- u8 reserved_at_1a0[0x60];
+ u8 reserved_at_1c0[0x20];
};
struct mlx5_ifc_mtppse_reg_bits {
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index 45cdb27..7f384bb 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -342,7 +342,7 @@
struct mempolicy *vm_policy; /* NUMA policy for the VMA */
#endif
struct vm_userfaultfd_ctx vm_userfaultfd_ctx;
-};
+} __randomize_layout;
struct core_thread {
struct task_struct *task;
@@ -495,12 +495,16 @@
*/
bool tlb_flush_pending;
#endif
+#ifdef CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH
+ /* See flush_tlb_batched_pending() */
+ bool tlb_flush_batched;
+#endif
struct uprobes_state uprobes_state;
#ifdef CONFIG_HUGETLB_PAGE
atomic_long_t hugetlb_usage;
#endif
struct work_struct async_put_work;
-};
+} __randomize_layout;
extern struct mm_struct init_mm;
diff --git a/include/linux/module.h b/include/linux/module.h
index 8eb9a1e..e7bdd54 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -45,7 +45,7 @@
struct kobject *drivers_dir;
struct module_param_attrs *mp;
struct completion *kobj_completion;
-};
+} __randomize_layout;
struct module_attribute {
struct attribute attr;
@@ -475,7 +475,7 @@
ctor_fn_t *ctors;
unsigned int num_ctors;
#endif
-} ____cacheline_aligned;
+} ____cacheline_aligned __randomize_layout;
#ifndef MODULE_ARCH_INIT
#define MODULE_ARCH_INIT {}
#endif
diff --git a/include/linux/mount.h b/include/linux/mount.h
index 8e0352a..1ce85e6 100644
--- a/include/linux/mount.h
+++ b/include/linux/mount.h
@@ -67,7 +67,7 @@
struct dentry *mnt_root; /* root of the mounted tree */
struct super_block *mnt_sb; /* pointer to superblock */
int mnt_flags;
-};
+} __randomize_layout;
struct file; /* forward dec */
struct path;
diff --git a/include/linux/msg.h b/include/linux/msg.h
index f3f302f..a001305 100644
--- a/include/linux/msg.h
+++ b/include/linux/msg.h
@@ -29,7 +29,7 @@
struct list_head q_messages;
struct list_head q_receivers;
struct list_head q_senders;
-};
+} __randomize_layout;
/* Helper routines for sys_msgsnd and sys_msgrcv */
extern long do_msgsnd(int msqid, long mtype, void __user *mtext,
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index de0d889..892148c 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -107,6 +107,8 @@
#define NAND_STATUS_READY 0x40
#define NAND_STATUS_WP 0x80
+#define NAND_DATA_IFACE_CHECK_ONLY -1
+
/*
* Constants for ECC_MODES
*/
@@ -116,6 +118,7 @@
NAND_ECC_HW,
NAND_ECC_HW_SYNDROME,
NAND_ECC_HW_OOB_FIRST,
+ NAND_ECC_ON_DIE,
} nand_ecc_modes_t;
enum nand_ecc_algo {
@@ -257,6 +260,8 @@
/* Vendor-specific feature address (Micron) */
#define ONFI_FEATURE_ADDR_READ_RETRY 0x89
+#define ONFI_FEATURE_ON_DIE_ECC 0x90
+#define ONFI_FEATURE_ON_DIE_ECC_EN BIT(3)
/* ONFI subfeature parameters length */
#define ONFI_SUBFEATURE_PARAM_LEN 4
@@ -477,6 +482,44 @@
}
/**
+ * struct nand_ecc_step_info - ECC step information of ECC engine
+ * @stepsize: data bytes per ECC step
+ * @strengths: array of supported strengths
+ * @nstrengths: number of supported strengths
+ */
+struct nand_ecc_step_info {
+ int stepsize;
+ const int *strengths;
+ int nstrengths;
+};
+
+/**
+ * struct nand_ecc_caps - capability of ECC engine
+ * @stepinfos: array of ECC step information
+ * @nstepinfos: number of ECC step information
+ * @calc_ecc_bytes: driver's hook to calculate ECC bytes per step
+ */
+struct nand_ecc_caps {
+ const struct nand_ecc_step_info *stepinfos;
+ int nstepinfos;
+ int (*calc_ecc_bytes)(int step_size, int strength);
+};
+
+/* a shorthand to generate struct nand_ecc_caps with only one ECC stepsize */
+#define NAND_ECC_CAPS_SINGLE(__name, __calc, __step, ...) \
+static const int __name##_strengths[] = { __VA_ARGS__ }; \
+static const struct nand_ecc_step_info __name##_stepinfo = { \
+ .stepsize = __step, \
+ .strengths = __name##_strengths, \
+ .nstrengths = ARRAY_SIZE(__name##_strengths), \
+}; \
+static const struct nand_ecc_caps __name = { \
+ .stepinfos = &__name##_stepinfo, \
+ .nstepinfos = 1, \
+ .calc_ecc_bytes = __calc, \
+}
+
+/**
* struct nand_ecc_ctrl - Control structure for ECC
* @mode: ECC mode
* @algo: ECC algorithm
@@ -815,7 +858,10 @@
* @read_retries: [INTERN] the number of read retry modes supported
* @onfi_set_features: [REPLACEABLE] set the features for ONFI nand
* @onfi_get_features: [REPLACEABLE] get the features for ONFI nand
- * @setup_data_interface: [OPTIONAL] setup the data interface and timing
+ * @setup_data_interface: [OPTIONAL] setup the data interface and timing. If
+ * chipnr is set to %NAND_DATA_IFACE_CHECK_ONLY this
+ * means the configuration should not be applied but
+ * only checked.
* @bbt: [INTERN] bad block table pointer
* @bbt_td: [REPLACEABLE] bad block table descriptor for flash
* lookup.
@@ -826,9 +872,6 @@
* structure which is shared among multiple independent
* devices.
* @priv: [OPTIONAL] pointer to private chip data
- * @errstat: [OPTIONAL] hardware specific function to perform
- * additional error status checks (determine if errors are
- * correctable).
* @manufacturer: [INTERN] Contains manufacturer information
*/
@@ -852,16 +895,13 @@
int(*waitfunc)(struct mtd_info *mtd, struct nand_chip *this);
int (*erase)(struct mtd_info *mtd, int page);
int (*scan_bbt)(struct mtd_info *mtd);
- int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state,
- int status, int page);
int (*onfi_set_features)(struct mtd_info *mtd, struct nand_chip *chip,
int feature_addr, uint8_t *subfeature_para);
int (*onfi_get_features)(struct mtd_info *mtd, struct nand_chip *chip,
int feature_addr, uint8_t *subfeature_para);
int (*setup_read_retry)(struct mtd_info *mtd, int retry_mode);
- int (*setup_data_interface)(struct mtd_info *mtd,
- const struct nand_data_interface *conf,
- bool check_only);
+ int (*setup_data_interface)(struct mtd_info *mtd, int chipnr,
+ const struct nand_data_interface *conf);
int chip_delay;
@@ -1244,6 +1284,15 @@
void *extraoob, int extraooblen,
int threshold);
+int nand_check_ecc_caps(struct nand_chip *chip,
+ const struct nand_ecc_caps *caps, int oobavail);
+
+int nand_match_ecc_req(struct nand_chip *chip,
+ const struct nand_ecc_caps *caps, int oobavail);
+
+int nand_maximize_ecc(struct nand_chip *chip,
+ const struct nand_ecc_caps *caps, int oobavail);
+
/* Default write_oob implementation */
int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip, int page);
@@ -1258,6 +1307,19 @@
int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
int page);
+/* Stub used by drivers that do not support GET/SET FEATURES operations */
+int nand_onfi_get_set_features_notsupp(struct mtd_info *mtd,
+ struct nand_chip *chip, int addr,
+ u8 *subfeature_param);
+
+/* Default read_page_raw implementation */
+int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page);
+
+/* Default write_page_raw implementation */
+int nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required, int page);
+
/* Reset and initialize a NAND device */
int nand_reset(struct nand_chip *chip, int chipnr);
diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h
index 06df1e0..c4beb70 100644
--- a/include/linux/mtd/partitions.h
+++ b/include/linux/mtd/partitions.h
@@ -20,6 +20,12 @@
*
* For each partition, these fields are available:
* name: string that will be used to label the partition's MTD device.
+ * types: some partitions can be containers using specific format to describe
+ * embedded subpartitions / volumes. E.g. many home routers use "firmware"
+ * partition that contains at least kernel and rootfs. In such case an
+ * extra parser is needed that will detect these dynamic partitions and
+ * report them to the MTD subsystem. If set this property stores an array
+ * of parser names to use when looking for subpartitions.
* size: the partition size; if defined as MTDPART_SIZ_FULL, the partition
* will extend to the end of the master MTD device.
* offset: absolute starting position within the master MTD device; if
@@ -38,6 +44,7 @@
struct mtd_partition {
const char *name; /* identifier string */
+ const char *const *types; /* names of parsers to use if any */
uint64_t size; /* partition size */
uint64_t offset; /* offset within the master MTD space */
uint32_t mask_flags; /* master MTD flags to mask out for this partition */
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index f2a7180..55faa2f 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -73,6 +73,15 @@
#define SPINOR_OP_BE_32K_4B 0x5c /* Erase 32KiB block */
#define SPINOR_OP_SE_4B 0xdc /* Sector erase (usually 64KiB) */
+/* Double Transfer Rate opcodes - defined in JEDEC JESD216B. */
+#define SPINOR_OP_READ_1_1_1_DTR 0x0d
+#define SPINOR_OP_READ_1_2_2_DTR 0xbd
+#define SPINOR_OP_READ_1_4_4_DTR 0xed
+
+#define SPINOR_OP_READ_1_1_1_DTR_4B 0x0e
+#define SPINOR_OP_READ_1_2_2_DTR_4B 0xbe
+#define SPINOR_OP_READ_1_4_4_DTR_4B 0xee
+
/* Used for SST flashes only. */
#define SPINOR_OP_BP 0x02 /* Byte program */
#define SPINOR_OP_WRDI 0x04 /* Write disable */
@@ -119,13 +128,81 @@
/* Configuration Register bits. */
#define CR_QUAD_EN_SPAN BIT(1) /* Spansion Quad I/O */
-enum read_mode {
- SPI_NOR_NORMAL = 0,
- SPI_NOR_FAST,
- SPI_NOR_DUAL,
- SPI_NOR_QUAD,
+/* Supported SPI protocols */
+#define SNOR_PROTO_INST_MASK GENMASK(23, 16)
+#define SNOR_PROTO_INST_SHIFT 16
+#define SNOR_PROTO_INST(_nbits) \
+ ((((unsigned long)(_nbits)) << SNOR_PROTO_INST_SHIFT) & \
+ SNOR_PROTO_INST_MASK)
+
+#define SNOR_PROTO_ADDR_MASK GENMASK(15, 8)
+#define SNOR_PROTO_ADDR_SHIFT 8
+#define SNOR_PROTO_ADDR(_nbits) \
+ ((((unsigned long)(_nbits)) << SNOR_PROTO_ADDR_SHIFT) & \
+ SNOR_PROTO_ADDR_MASK)
+
+#define SNOR_PROTO_DATA_MASK GENMASK(7, 0)
+#define SNOR_PROTO_DATA_SHIFT 0
+#define SNOR_PROTO_DATA(_nbits) \
+ ((((unsigned long)(_nbits)) << SNOR_PROTO_DATA_SHIFT) & \
+ SNOR_PROTO_DATA_MASK)
+
+#define SNOR_PROTO_IS_DTR BIT(24) /* Double Transfer Rate */
+
+#define SNOR_PROTO_STR(_inst_nbits, _addr_nbits, _data_nbits) \
+ (SNOR_PROTO_INST(_inst_nbits) | \
+ SNOR_PROTO_ADDR(_addr_nbits) | \
+ SNOR_PROTO_DATA(_data_nbits))
+#define SNOR_PROTO_DTR(_inst_nbits, _addr_nbits, _data_nbits) \
+ (SNOR_PROTO_IS_DTR | \
+ SNOR_PROTO_STR(_inst_nbits, _addr_nbits, _data_nbits))
+
+enum spi_nor_protocol {
+ SNOR_PROTO_1_1_1 = SNOR_PROTO_STR(1, 1, 1),
+ SNOR_PROTO_1_1_2 = SNOR_PROTO_STR(1, 1, 2),
+ SNOR_PROTO_1_1_4 = SNOR_PROTO_STR(1, 1, 4),
+ SNOR_PROTO_1_1_8 = SNOR_PROTO_STR(1, 1, 8),
+ SNOR_PROTO_1_2_2 = SNOR_PROTO_STR(1, 2, 2),
+ SNOR_PROTO_1_4_4 = SNOR_PROTO_STR(1, 4, 4),
+ SNOR_PROTO_1_8_8 = SNOR_PROTO_STR(1, 8, 8),
+ SNOR_PROTO_2_2_2 = SNOR_PROTO_STR(2, 2, 2),
+ SNOR_PROTO_4_4_4 = SNOR_PROTO_STR(4, 4, 4),
+ SNOR_PROTO_8_8_8 = SNOR_PROTO_STR(8, 8, 8),
+
+ SNOR_PROTO_1_1_1_DTR = SNOR_PROTO_DTR(1, 1, 1),
+ SNOR_PROTO_1_2_2_DTR = SNOR_PROTO_DTR(1, 2, 2),
+ SNOR_PROTO_1_4_4_DTR = SNOR_PROTO_DTR(1, 4, 4),
+ SNOR_PROTO_1_8_8_DTR = SNOR_PROTO_DTR(1, 8, 8),
};
+static inline bool spi_nor_protocol_is_dtr(enum spi_nor_protocol proto)
+{
+ return !!(proto & SNOR_PROTO_IS_DTR);
+}
+
+static inline u8 spi_nor_get_protocol_inst_nbits(enum spi_nor_protocol proto)
+{
+ return ((unsigned long)(proto & SNOR_PROTO_INST_MASK)) >>
+ SNOR_PROTO_INST_SHIFT;
+}
+
+static inline u8 spi_nor_get_protocol_addr_nbits(enum spi_nor_protocol proto)
+{
+ return ((unsigned long)(proto & SNOR_PROTO_ADDR_MASK)) >>
+ SNOR_PROTO_ADDR_SHIFT;
+}
+
+static inline u8 spi_nor_get_protocol_data_nbits(enum spi_nor_protocol proto)
+{
+ return ((unsigned long)(proto & SNOR_PROTO_DATA_MASK)) >>
+ SNOR_PROTO_DATA_SHIFT;
+}
+
+static inline u8 spi_nor_get_protocol_width(enum spi_nor_protocol proto)
+{
+ return spi_nor_get_protocol_data_nbits(proto);
+}
+
#define SPI_NOR_MAX_CMD_SIZE 8
enum spi_nor_ops {
SPI_NOR_OPS_READ = 0,
@@ -154,9 +231,11 @@
* @read_opcode: the read opcode
* @read_dummy: the dummy needed by the read operation
* @program_opcode: the program opcode
- * @flash_read: the mode of the read
* @sst_write_second: used by the SST write operation
* @flags: flag options for the current SPI-NOR (SNOR_F_*)
+ * @read_proto: the SPI protocol for read operations
+ * @write_proto: the SPI protocol for write operations
+ * @reg_proto the SPI protocol for read_reg/write_reg/erase operations
* @cmd_buf: used by the write_reg
* @prepare: [OPTIONAL] do some preparations for the
* read/write/erase/lock/unlock operations
@@ -185,7 +264,9 @@
u8 read_opcode;
u8 read_dummy;
u8 program_opcode;
- enum read_mode flash_read;
+ enum spi_nor_protocol read_proto;
+ enum spi_nor_protocol write_proto;
+ enum spi_nor_protocol reg_proto;
bool sst_write_second;
u32 flags;
u8 cmd_buf[SPI_NOR_MAX_CMD_SIZE];
@@ -220,10 +301,71 @@
}
/**
+ * struct spi_nor_hwcaps - Structure for describing the hardware capabilies
+ * supported by the SPI controller (bus master).
+ * @mask: the bitmask listing all the supported hw capabilies
+ */
+struct spi_nor_hwcaps {
+ u32 mask;
+};
+
+/*
+ *(Fast) Read capabilities.
+ * MUST be ordered by priority: the higher bit position, the higher priority.
+ * As a matter of performances, it is relevant to use Octo SPI protocols first,
+ * then Quad SPI protocols before Dual SPI protocols, Fast Read and lastly
+ * (Slow) Read.
+ */
+#define SNOR_HWCAPS_READ_MASK GENMASK(14, 0)
+#define SNOR_HWCAPS_READ BIT(0)
+#define SNOR_HWCAPS_READ_FAST BIT(1)
+#define SNOR_HWCAPS_READ_1_1_1_DTR BIT(2)
+
+#define SNOR_HWCAPS_READ_DUAL GENMASK(6, 3)
+#define SNOR_HWCAPS_READ_1_1_2 BIT(3)
+#define SNOR_HWCAPS_READ_1_2_2 BIT(4)
+#define SNOR_HWCAPS_READ_2_2_2 BIT(5)
+#define SNOR_HWCAPS_READ_1_2_2_DTR BIT(6)
+
+#define SNOR_HWCAPS_READ_QUAD GENMASK(10, 7)
+#define SNOR_HWCAPS_READ_1_1_4 BIT(7)
+#define SNOR_HWCAPS_READ_1_4_4 BIT(8)
+#define SNOR_HWCAPS_READ_4_4_4 BIT(9)
+#define SNOR_HWCAPS_READ_1_4_4_DTR BIT(10)
+
+#define SNOR_HWCPAS_READ_OCTO GENMASK(14, 11)
+#define SNOR_HWCAPS_READ_1_1_8 BIT(11)
+#define SNOR_HWCAPS_READ_1_8_8 BIT(12)
+#define SNOR_HWCAPS_READ_8_8_8 BIT(13)
+#define SNOR_HWCAPS_READ_1_8_8_DTR BIT(14)
+
+/*
+ * Page Program capabilities.
+ * MUST be ordered by priority: the higher bit position, the higher priority.
+ * Like (Fast) Read capabilities, Octo/Quad SPI protocols are preferred to the
+ * legacy SPI 1-1-1 protocol.
+ * Note that Dual Page Programs are not supported because there is no existing
+ * JEDEC/SFDP standard to define them. Also at this moment no SPI flash memory
+ * implements such commands.
+ */
+#define SNOR_HWCAPS_PP_MASK GENMASK(22, 16)
+#define SNOR_HWCAPS_PP BIT(16)
+
+#define SNOR_HWCAPS_PP_QUAD GENMASK(19, 17)
+#define SNOR_HWCAPS_PP_1_1_4 BIT(17)
+#define SNOR_HWCAPS_PP_1_4_4 BIT(18)
+#define SNOR_HWCAPS_PP_4_4_4 BIT(19)
+
+#define SNOR_HWCAPS_PP_OCTO GENMASK(22, 20)
+#define SNOR_HWCAPS_PP_1_1_8 BIT(20)
+#define SNOR_HWCAPS_PP_1_8_8 BIT(21)
+#define SNOR_HWCAPS_PP_8_8_8 BIT(22)
+
+/**
* spi_nor_scan() - scan the SPI NOR
* @nor: the spi_nor structure
* @name: the chip type name
- * @mode: the read mode supported by the driver
+ * @hwcaps: the hardware capabilities supported by the controller driver
*
* The drivers can use this fuction to scan the SPI NOR.
* In the scanning, it will try to get all the necessary information to
@@ -233,6 +375,7 @@
*
* Return: 0 for success, others for failure.
*/
-int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode);
+int spi_nor_scan(struct spi_nor *nor, const char *name,
+ const struct spi_nor_hwcaps *hwcaps);
#endif
diff --git a/include/linux/net.h b/include/linux/net.h
index abcfa46..dda2cc9 100644
--- a/include/linux/net.h
+++ b/include/linux/net.h
@@ -274,6 +274,8 @@
#define net_get_random_once(buf, nbytes) \
get_random_once((buf), (nbytes))
+#define net_get_random_once_wait(buf, nbytes) \
+ get_random_once_wait((buf), (nbytes))
int kernel_sendmsg(struct socket *sock, struct msghdr *msg, struct kvec *vec,
size_t num, size_t len);
diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h
index a4b97be..22f0810 100644
--- a/include/linux/netfilter.h
+++ b/include/linux/netfilter.h
@@ -61,8 +61,6 @@
struct sk_buff *skb,
const struct nf_hook_state *state);
struct nf_hook_ops {
- struct list_head list;
-
/* User fills in from here down. */
nf_hookfn *hook;
struct net_device *dev;
@@ -160,13 +158,6 @@
void nf_unregister_net_hooks(struct net *net, const struct nf_hook_ops *reg,
unsigned int n);
-int nf_register_hook(struct nf_hook_ops *reg);
-void nf_unregister_hook(struct nf_hook_ops *reg);
-int nf_register_hooks(struct nf_hook_ops *reg, unsigned int n);
-void nf_unregister_hooks(struct nf_hook_ops *reg, unsigned int n);
-int _nf_register_hooks(struct nf_hook_ops *reg, unsigned int n);
-void _nf_unregister_hooks(struct nf_hook_ops *reg, unsigned int n);
-
/* Functions to register get/setsockopt ranges (non-inclusive). You
need to check permissions yourself! */
int nf_register_sockopt(struct nf_sockopt_ops *reg);
diff --git a/include/linux/nfs4.h b/include/linux/nfs4.h
index 1b1ca04..47239c3 100644
--- a/include/linux/nfs4.h
+++ b/include/linux/nfs4.h
@@ -479,6 +479,7 @@
NFSPROC4_CLNT_ACCESS,
NFSPROC4_CLNT_GETATTR,
NFSPROC4_CLNT_LOOKUP,
+ NFSPROC4_CLNT_LOOKUPP,
NFSPROC4_CLNT_LOOKUP_ROOT,
NFSPROC4_CLNT_REMOVE,
NFSPROC4_CLNT_RENAME,
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index bb0eb2c..5cc91d6 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -51,7 +51,7 @@
struct list_head lru;
unsigned long jiffies;
struct rpc_cred * cred;
- int mask;
+ __u32 mask;
struct rcu_head rcu_head;
};
@@ -332,6 +332,7 @@
extern void nfs_invalidate_atime(struct inode *);
extern struct inode *nfs_fhget(struct super_block *, struct nfs_fh *,
struct nfs_fattr *, struct nfs4_label *);
+struct inode *nfs_ilookup(struct super_block *sb, struct nfs_fattr *, struct nfs_fh *);
extern int nfs_refresh_inode(struct inode *, struct nfs_fattr *);
extern int nfs_post_op_update_inode(struct inode *inode, struct nfs_fattr *fattr);
extern int nfs_post_op_update_inode_force_wcc(struct inode *inode, struct nfs_fattr *fattr);
diff --git a/include/linux/nfs_fs_sb.h b/include/linux/nfs_fs_sb.h
index e418a10..74c4466 100644
--- a/include/linux/nfs_fs_sb.h
+++ b/include/linux/nfs_fs_sb.h
@@ -42,6 +42,7 @@
#define NFS_CS_MIGRATION 2 /* - transparent state migr */
#define NFS_CS_INFINITE_SLOTS 3 /* - don't limit TCP slots */
#define NFS_CS_NO_RETRANS_TIMEOUT 4 /* - Disable retransmit timeouts */
+#define NFS_CS_TSM_POSSIBLE 5 /* - Maybe state migration */
struct sockaddr_storage cl_addr; /* server identifier */
size_t cl_addrlen;
char * cl_hostname; /* hostname of server */
@@ -210,6 +211,7 @@
unsigned long mig_status;
#define NFS_MIG_IN_TRANSITION (1)
#define NFS_MIG_FAILED (2)
+#define NFS_MIG_TSM_POSSIBLE (3)
void (*destroy)(struct nfs_server *);
diff --git a/include/linux/nfs_page.h b/include/linux/nfs_page.h
index 247cc3d..d67b67a 100644
--- a/include/linux/nfs_page.h
+++ b/include/linux/nfs_page.h
@@ -33,6 +33,8 @@
PG_UPTODATE, /* page group sync bit in read path */
PG_WB_END, /* page group sync bit in write path */
PG_REMOVE, /* page group sync bit in write path */
+ PG_CONTENDED1, /* Is someone waiting for a lock? */
+ PG_CONTENDED2, /* Is someone waiting for a lock? */
};
struct nfs_inode;
@@ -93,8 +95,8 @@
const struct rpc_call_ops *pg_rpc_callops;
const struct nfs_pgio_completion_ops *pg_completion_ops;
struct pnfs_layout_segment *pg_lseg;
+ struct nfs_io_completion *pg_io_completion;
struct nfs_direct_req *pg_dreq;
- void *pg_layout_private;
unsigned int pg_bsize; /* default bsize for mirrors */
u32 pg_mirror_count;
diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h
index b28c834..62cbcb8 100644
--- a/include/linux/nfs_xdr.h
+++ b/include/linux/nfs_xdr.h
@@ -878,7 +878,7 @@
struct nfs_fh * fh;
__u64 cookie;
__be32 verf[2];
- int plus;
+ bool plus;
unsigned int count;
struct page ** pages;
};
@@ -909,7 +909,7 @@
struct nfs3_readdirres {
struct nfs_fattr * dir_attr;
__be32 * verf;
- int plus;
+ bool plus;
};
struct nfs3_getaclres {
@@ -1012,7 +1012,6 @@
struct nfs_fattr * dir_attr;
};
-
struct nfs4_lookup_arg {
struct nfs4_sequence_args seq_args;
const struct nfs_fh * dir_fh;
@@ -1028,6 +1027,20 @@
struct nfs4_label *label;
};
+struct nfs4_lookupp_arg {
+ struct nfs4_sequence_args seq_args;
+ const struct nfs_fh *fh;
+ const u32 *bitmask;
+};
+
+struct nfs4_lookupp_res {
+ struct nfs4_sequence_res seq_res;
+ const struct nfs_server *server;
+ struct nfs_fattr *fattr;
+ struct nfs_fh *fh;
+ struct nfs4_label *label;
+};
+
struct nfs4_lookup_root_arg {
struct nfs4_sequence_args seq_args;
const u32 * bitmask;
@@ -1053,7 +1066,7 @@
struct page ** pages; /* zero-copy data */
unsigned int pgbase; /* zero-copy data */
const u32 * bitmask;
- int plus;
+ bool plus;
};
struct nfs4_readdir_res {
@@ -1222,7 +1235,7 @@
struct nfs41_exchange_id_args {
struct nfs_client *client;
- nfs4_verifier *verifier;
+ nfs4_verifier verifier;
u32 flags;
struct nfs41_state_protection state_protect;
};
@@ -1422,6 +1435,7 @@
NFS_IOHDR_STAT,
};
+struct nfs_io_completion;
struct nfs_pgio_header {
struct inode *inode;
struct rpc_cred *cred;
@@ -1435,8 +1449,8 @@
void (*release) (struct nfs_pgio_header *hdr);
const struct nfs_pgio_completion_ops *completion_ops;
const struct nfs_rw_ops *rw_ops;
+ struct nfs_io_completion *io_completion;
struct nfs_direct_req *dreq;
- void *layout_private;
spinlock_t lock;
/* fields protected by lock */
int pnfs_error;
@@ -1533,6 +1547,7 @@
struct nfs_fattr new_fattr;
void (*complete)(struct rpc_task *, struct nfs_renamedata *);
long timeout;
+ bool cancelled;
};
struct nfs_access_entry;
@@ -1567,6 +1582,8 @@
int (*lookup) (struct inode *, const struct qstr *,
struct nfs_fh *, struct nfs_fattr *,
struct nfs4_label *);
+ int (*lookupp) (struct inode *, struct nfs_fh *,
+ struct nfs_fattr *, struct nfs4_label *);
int (*access) (struct inode *, struct nfs_access_entry *);
int (*readlink)(struct inode *, struct page *, unsigned int,
unsigned int);
@@ -1585,7 +1602,7 @@
int (*mkdir) (struct inode *, struct dentry *, struct iattr *);
int (*rmdir) (struct inode *, const struct qstr *);
int (*readdir) (struct dentry *, struct rpc_cred *,
- u64, struct page **, unsigned int, int);
+ u64, struct page **, unsigned int, bool);
int (*mknod) (struct inode *, struct dentry *, struct iattr *,
dev_t);
int (*statfs) (struct nfs_server *, struct nfs_fh *,
@@ -1595,7 +1612,7 @@
int (*pathconf) (struct nfs_server *, struct nfs_fh *,
struct nfs_pathconf *);
int (*set_capabilities)(struct nfs_server *, struct nfs_fh *);
- int (*decode_dirent)(struct xdr_stream *, struct nfs_entry *, int);
+ int (*decode_dirent)(struct xdr_stream *, struct nfs_entry *, bool);
int (*pgio_rpc_prepare)(struct rpc_task *,
struct nfs_pgio_header *);
void (*read_setup)(struct nfs_pgio_header *, struct rpc_message *);
diff --git a/include/linux/nmi.h b/include/linux/nmi.h
index aa3cd08..8aa01fd 100644
--- a/include/linux/nmi.h
+++ b/include/linux/nmi.h
@@ -6,18 +6,26 @@
#include <linux/sched.h>
#include <asm/irq.h>
+#if defined(CONFIG_HAVE_NMI_WATCHDOG)
+#include <asm/nmi.h>
+#endif
#ifdef CONFIG_LOCKUP_DETECTOR
+void lockup_detector_init(void);
+#else
+static inline void lockup_detector_init(void)
+{
+}
+#endif
+
+#ifdef CONFIG_SOFTLOCKUP_DETECTOR
extern void touch_softlockup_watchdog_sched(void);
extern void touch_softlockup_watchdog(void);
extern void touch_softlockup_watchdog_sync(void);
extern void touch_all_softlockup_watchdogs(void);
-extern int proc_dowatchdog_thresh(struct ctl_table *table, int write,
- void __user *buffer,
- size_t *lenp, loff_t *ppos);
extern unsigned int softlockup_panic;
-extern unsigned int hardlockup_panic;
-void lockup_detector_init(void);
+extern int soft_watchdog_enabled;
+extern atomic_t watchdog_park_in_progress;
#else
static inline void touch_softlockup_watchdog_sched(void)
{
@@ -31,9 +39,6 @@
static inline void touch_all_softlockup_watchdogs(void)
{
}
-static inline void lockup_detector_init(void)
-{
-}
#endif
#ifdef CONFIG_DETECT_HUNG_TASK
@@ -61,6 +66,21 @@
#define NMI_WATCHDOG_ENABLED (1 << NMI_WATCHDOG_ENABLED_BIT)
#define SOFT_WATCHDOG_ENABLED (1 << SOFT_WATCHDOG_ENABLED_BIT)
+#if defined(CONFIG_HARDLOCKUP_DETECTOR)
+extern void hardlockup_detector_disable(void);
+extern unsigned int hardlockup_panic;
+#else
+static inline void hardlockup_detector_disable(void) {}
+#endif
+
+#if defined(CONFIG_HARDLOCKUP_DETECTOR_PERF)
+extern void arch_touch_nmi_watchdog(void);
+#else
+#if !defined(CONFIG_HAVE_NMI_WATCHDOG)
+static inline void arch_touch_nmi_watchdog(void) {}
+#endif
+#endif
+
/**
* touch_nmi_watchdog - restart NMI watchdog timeout.
*
@@ -68,21 +88,11 @@
* may be used to reset the timeout - for code which intentionally
* disables interrupts for a long time. This call is stateless.
*/
-#if defined(CONFIG_HAVE_NMI_WATCHDOG) || defined(CONFIG_HARDLOCKUP_DETECTOR)
-#include <asm/nmi.h>
-extern void touch_nmi_watchdog(void);
-#else
static inline void touch_nmi_watchdog(void)
{
+ arch_touch_nmi_watchdog();
touch_softlockup_watchdog();
}
-#endif
-
-#if defined(CONFIG_HARDLOCKUP_DETECTOR)
-extern void hardlockup_detector_disable(void);
-#else
-static inline void hardlockup_detector_disable(void) {}
-#endif
/*
* Create trigger_all_cpu_backtrace() out of the arch-provided
@@ -139,15 +149,18 @@
}
#endif
-#ifdef CONFIG_LOCKUP_DETECTOR
+#ifdef CONFIG_HARDLOCKUP_DETECTOR_PERF
u64 hw_nmi_get_sample_period(int watchdog_thresh);
+#endif
+
+#ifdef CONFIG_LOCKUP_DETECTOR
extern int nmi_watchdog_enabled;
-extern int soft_watchdog_enabled;
extern int watchdog_user_enabled;
extern int watchdog_thresh;
extern unsigned long watchdog_enabled;
+extern struct cpumask watchdog_cpumask;
extern unsigned long *watchdog_cpumask_bits;
-extern atomic_t watchdog_park_in_progress;
+extern int __read_mostly watchdog_suspended;
#ifdef CONFIG_SMP
extern int sysctl_softlockup_all_cpu_backtrace;
extern int sysctl_hardlockup_all_cpu_backtrace;
diff --git a/include/linux/ntb.h b/include/linux/ntb.h
index de87cea..609e232 100644
--- a/include/linux/ntb.h
+++ b/include/linux/ntb.h
@@ -5,6 +5,7 @@
* GPL LICENSE SUMMARY
*
* Copyright (C) 2015 EMC Corporation. All Rights Reserved.
+ * Copyright (C) 2016 T-Platforms. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
@@ -18,6 +19,7 @@
* BSD LICENSE
*
* Copyright (C) 2015 EMC Corporation. All Rights Reserved.
+ * Copyright (C) 2016 T-Platforms. All Rights Reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
@@ -106,6 +108,7 @@
* @NTB_SPEED_GEN1: Link is trained to gen1 speed.
* @NTB_SPEED_GEN2: Link is trained to gen2 speed.
* @NTB_SPEED_GEN3: Link is trained to gen3 speed.
+ * @NTB_SPEED_GEN4: Link is trained to gen4 speed.
*/
enum ntb_speed {
NTB_SPEED_AUTO = -1,
@@ -113,6 +116,7 @@
NTB_SPEED_GEN1 = 1,
NTB_SPEED_GEN2 = 2,
NTB_SPEED_GEN3 = 3,
+ NTB_SPEED_GEN4 = 4
};
/**
@@ -140,6 +144,20 @@
};
/**
+ * enum ntb_default_port - NTB default port number
+ * @NTB_PORT_PRI_USD: Default port of the NTB_TOPO_PRI/NTB_TOPO_B2B_USD
+ * topologies
+ * @NTB_PORT_SEC_DSD: Default port of the NTB_TOPO_SEC/NTB_TOPO_B2B_DSD
+ * topologies
+ */
+enum ntb_default_port {
+ NTB_PORT_PRI_USD,
+ NTB_PORT_SEC_DSD
+};
+#define NTB_DEF_PEER_CNT (1)
+#define NTB_DEF_PEER_IDX (0)
+
+/**
* struct ntb_client_ops - ntb client operations
* @probe: Notify client of a new device.
* @remove: Notify client to remove a device.
@@ -162,10 +180,12 @@
* struct ntb_ctx_ops - ntb driver context operations
* @link_event: See ntb_link_event().
* @db_event: See ntb_db_event().
+ * @msg_event: See ntb_msg_event().
*/
struct ntb_ctx_ops {
void (*link_event)(void *ctx);
void (*db_event)(void *ctx, int db_vector);
+ void (*msg_event)(void *ctx);
};
static inline int ntb_ctx_ops_is_valid(const struct ntb_ctx_ops *ops)
@@ -174,18 +194,27 @@
return
/* ops->link_event && */
/* ops->db_event && */
+ /* ops->msg_event && */
1;
}
/**
* struct ntb_ctx_ops - ntb device operations
- * @mw_count: See ntb_mw_count().
- * @mw_get_range: See ntb_mw_get_range().
- * @mw_set_trans: See ntb_mw_set_trans().
- * @mw_clear_trans: See ntb_mw_clear_trans().
+ * @port_number: See ntb_port_number().
+ * @peer_port_count: See ntb_peer_port_count().
+ * @peer_port_number: See ntb_peer_port_number().
+ * @peer_port_idx: See ntb_peer_port_idx().
* @link_is_up: See ntb_link_is_up().
* @link_enable: See ntb_link_enable().
* @link_disable: See ntb_link_disable().
+ * @mw_count: See ntb_mw_count().
+ * @mw_get_align: See ntb_mw_get_align().
+ * @mw_set_trans: See ntb_mw_set_trans().
+ * @mw_clear_trans: See ntb_mw_clear_trans().
+ * @peer_mw_count: See ntb_peer_mw_count().
+ * @peer_mw_get_addr: See ntb_peer_mw_get_addr().
+ * @peer_mw_set_trans: See ntb_peer_mw_set_trans().
+ * @peer_mw_clear_trans:See ntb_peer_mw_clear_trans().
* @db_is_unsafe: See ntb_db_is_unsafe().
* @db_valid_mask: See ntb_db_valid_mask().
* @db_vector_count: See ntb_db_vector_count().
@@ -210,22 +239,43 @@
* @peer_spad_addr: See ntb_peer_spad_addr().
* @peer_spad_read: See ntb_peer_spad_read().
* @peer_spad_write: See ntb_peer_spad_write().
+ * @msg_count: See ntb_msg_count().
+ * @msg_inbits: See ntb_msg_inbits().
+ * @msg_outbits: See ntb_msg_outbits().
+ * @msg_read_sts: See ntb_msg_read_sts().
+ * @msg_clear_sts: See ntb_msg_clear_sts().
+ * @msg_set_mask: See ntb_msg_set_mask().
+ * @msg_clear_mask: See ntb_msg_clear_mask().
+ * @msg_read: See ntb_msg_read().
+ * @msg_write: See ntb_msg_write().
*/
struct ntb_dev_ops {
- int (*mw_count)(struct ntb_dev *ntb);
- int (*mw_get_range)(struct ntb_dev *ntb, int idx,
- phys_addr_t *base, resource_size_t *size,
- resource_size_t *align, resource_size_t *align_size);
- int (*mw_set_trans)(struct ntb_dev *ntb, int idx,
- dma_addr_t addr, resource_size_t size);
- int (*mw_clear_trans)(struct ntb_dev *ntb, int idx);
+ int (*port_number)(struct ntb_dev *ntb);
+ int (*peer_port_count)(struct ntb_dev *ntb);
+ int (*peer_port_number)(struct ntb_dev *ntb, int pidx);
+ int (*peer_port_idx)(struct ntb_dev *ntb, int port);
- int (*link_is_up)(struct ntb_dev *ntb,
+ u64 (*link_is_up)(struct ntb_dev *ntb,
enum ntb_speed *speed, enum ntb_width *width);
int (*link_enable)(struct ntb_dev *ntb,
enum ntb_speed max_speed, enum ntb_width max_width);
int (*link_disable)(struct ntb_dev *ntb);
+ int (*mw_count)(struct ntb_dev *ntb, int pidx);
+ int (*mw_get_align)(struct ntb_dev *ntb, int pidx, int widx,
+ resource_size_t *addr_align,
+ resource_size_t *size_align,
+ resource_size_t *size_max);
+ int (*mw_set_trans)(struct ntb_dev *ntb, int pidx, int widx,
+ dma_addr_t addr, resource_size_t size);
+ int (*mw_clear_trans)(struct ntb_dev *ntb, int pidx, int widx);
+ int (*peer_mw_count)(struct ntb_dev *ntb);
+ int (*peer_mw_get_addr)(struct ntb_dev *ntb, int widx,
+ phys_addr_t *base, resource_size_t *size);
+ int (*peer_mw_set_trans)(struct ntb_dev *ntb, int pidx, int widx,
+ u64 addr, resource_size_t size);
+ int (*peer_mw_clear_trans)(struct ntb_dev *ntb, int pidx, int widx);
+
int (*db_is_unsafe)(struct ntb_dev *ntb);
u64 (*db_valid_mask)(struct ntb_dev *ntb);
int (*db_vector_count)(struct ntb_dev *ntb);
@@ -252,32 +302,55 @@
int (*spad_is_unsafe)(struct ntb_dev *ntb);
int (*spad_count)(struct ntb_dev *ntb);
- u32 (*spad_read)(struct ntb_dev *ntb, int idx);
- int (*spad_write)(struct ntb_dev *ntb, int idx, u32 val);
+ u32 (*spad_read)(struct ntb_dev *ntb, int sidx);
+ int (*spad_write)(struct ntb_dev *ntb, int sidx, u32 val);
- int (*peer_spad_addr)(struct ntb_dev *ntb, int idx,
+ int (*peer_spad_addr)(struct ntb_dev *ntb, int pidx, int sidx,
phys_addr_t *spad_addr);
- u32 (*peer_spad_read)(struct ntb_dev *ntb, int idx);
- int (*peer_spad_write)(struct ntb_dev *ntb, int idx, u32 val);
+ u32 (*peer_spad_read)(struct ntb_dev *ntb, int pidx, int sidx);
+ int (*peer_spad_write)(struct ntb_dev *ntb, int pidx, int sidx,
+ u32 val);
+
+ int (*msg_count)(struct ntb_dev *ntb);
+ u64 (*msg_inbits)(struct ntb_dev *ntb);
+ u64 (*msg_outbits)(struct ntb_dev *ntb);
+ u64 (*msg_read_sts)(struct ntb_dev *ntb);
+ int (*msg_clear_sts)(struct ntb_dev *ntb, u64 sts_bits);
+ int (*msg_set_mask)(struct ntb_dev *ntb, u64 mask_bits);
+ int (*msg_clear_mask)(struct ntb_dev *ntb, u64 mask_bits);
+ int (*msg_read)(struct ntb_dev *ntb, int midx, int *pidx, u32 *msg);
+ int (*msg_write)(struct ntb_dev *ntb, int midx, int pidx, u32 msg);
};
static inline int ntb_dev_ops_is_valid(const struct ntb_dev_ops *ops)
{
/* commented callbacks are not required: */
return
- ops->mw_count &&
- ops->mw_get_range &&
- ops->mw_set_trans &&
- /* ops->mw_clear_trans && */
+ /* Port operations are required for multiport devices */
+ !ops->peer_port_count == !ops->port_number &&
+ !ops->peer_port_number == !ops->port_number &&
+ !ops->peer_port_idx == !ops->port_number &&
+
+ /* Link operations are required */
ops->link_is_up &&
ops->link_enable &&
ops->link_disable &&
+
+ /* One or both MW interfaces should be developed */
+ ops->mw_count &&
+ ops->mw_get_align &&
+ (ops->mw_set_trans ||
+ ops->peer_mw_set_trans) &&
+ /* ops->mw_clear_trans && */
+ ops->peer_mw_count &&
+ ops->peer_mw_get_addr &&
+ /* ops->peer_mw_clear_trans && */
+
+ /* Doorbell operations are mostly required */
/* ops->db_is_unsafe && */
ops->db_valid_mask &&
-
/* both set, or both unset */
- (!ops->db_vector_count == !ops->db_vector_mask) &&
-
+ (!ops->db_vector_count == !ops->db_vector_mask) &&
ops->db_read &&
/* ops->db_set && */
ops->db_clear &&
@@ -291,13 +364,24 @@
/* ops->peer_db_read_mask && */
/* ops->peer_db_set_mask && */
/* ops->peer_db_clear_mask && */
- /* ops->spad_is_unsafe && */
- ops->spad_count &&
- ops->spad_read &&
- ops->spad_write &&
- /* ops->peer_spad_addr && */
- /* ops->peer_spad_read && */
- ops->peer_spad_write &&
+
+ /* Scrachpads interface is optional */
+ /* !ops->spad_is_unsafe == !ops->spad_count && */
+ !ops->spad_read == !ops->spad_count &&
+ !ops->spad_write == !ops->spad_count &&
+ /* !ops->peer_spad_addr == !ops->spad_count && */
+ /* !ops->peer_spad_read == !ops->spad_count && */
+ !ops->peer_spad_write == !ops->spad_count &&
+
+ /* Messaging interface is optional */
+ !ops->msg_inbits == !ops->msg_count &&
+ !ops->msg_outbits == !ops->msg_count &&
+ !ops->msg_read_sts == !ops->msg_count &&
+ !ops->msg_clear_sts == !ops->msg_count &&
+ /* !ops->msg_set_mask == !ops->msg_count && */
+ /* !ops->msg_clear_mask == !ops->msg_count && */
+ !ops->msg_read == !ops->msg_count &&
+ !ops->msg_write == !ops->msg_count &&
1;
}
@@ -310,13 +394,12 @@
struct device_driver drv;
const struct ntb_client_ops ops;
};
-
#define drv_ntb_client(__drv) container_of((__drv), struct ntb_client, drv)
/**
* struct ntb_device - ntb device
* @dev: Linux device object.
- * @pdev: Pci device entry of the ntb.
+ * @pdev: PCI device entry of the ntb.
* @topo: Detected topology of the ntb.
* @ops: See &ntb_dev_ops.
* @ctx: See &ntb_ctx_ops.
@@ -337,7 +420,6 @@
/* block unregister until device is fully released */
struct completion released;
};
-
#define dev_ntb(__dev) container_of((__dev), struct ntb_dev, dev)
/**
@@ -434,86 +516,152 @@
* multiple interrupt vectors for doorbells, the vector number indicates which
* vector received the interrupt. The vector number is relative to the first
* vector used for doorbells, starting at zero, and must be less than
- ** ntb_db_vector_count(). The driver may call ntb_db_read() to check which
+ * ntb_db_vector_count(). The driver may call ntb_db_read() to check which
* doorbell bits need service, and ntb_db_vector_mask() to determine which of
* those bits are associated with the vector number.
*/
void ntb_db_event(struct ntb_dev *ntb, int vector);
/**
- * ntb_mw_count() - get the number of memory windows
+ * ntb_msg_event() - notify driver context of a message event
* @ntb: NTB device context.
*
- * Hardware and topology may support a different number of memory windows.
- *
- * Return: the number of memory windows.
+ * Notify the driver context of a message event. If hardware supports
+ * message registers, this event indicates, that a new message arrived in
+ * some incoming message register or last sent message couldn't be delivered.
+ * The events can be masked/unmasked by the methods ntb_msg_set_mask() and
+ * ntb_msg_clear_mask().
*/
-static inline int ntb_mw_count(struct ntb_dev *ntb)
+void ntb_msg_event(struct ntb_dev *ntb);
+
+/**
+ * ntb_default_port_number() - get the default local port number
+ * @ntb: NTB device context.
+ *
+ * If hardware driver doesn't specify port_number() callback method, the NTB
+ * is considered with just two ports. So this method returns default local
+ * port number in compliance with topology.
+ *
+ * NOTE Don't call this method directly. The ntb_port_number() function should
+ * be used instead.
+ *
+ * Return: the default local port number
+ */
+int ntb_default_port_number(struct ntb_dev *ntb);
+
+/**
+ * ntb_default_port_count() - get the default number of peer device ports
+ * @ntb: NTB device context.
+ *
+ * By default hardware driver supports just one peer device.
+ *
+ * NOTE Don't call this method directly. The ntb_peer_port_count() function
+ * should be used instead.
+ *
+ * Return: the default number of peer ports
+ */
+int ntb_default_peer_port_count(struct ntb_dev *ntb);
+
+/**
+ * ntb_default_peer_port_number() - get the default peer port by given index
+ * @ntb: NTB device context.
+ * @idx: Peer port index (should not differ from zero).
+ *
+ * By default hardware driver supports just one peer device, so this method
+ * shall return the corresponding value from enum ntb_default_port.
+ *
+ * NOTE Don't call this method directly. The ntb_peer_port_number() function
+ * should be used instead.
+ *
+ * Return: the peer device port or negative value indicating an error
+ */
+int ntb_default_peer_port_number(struct ntb_dev *ntb, int pidx);
+
+/**
+ * ntb_default_peer_port_idx() - get the default peer device port index by
+ * given port number
+ * @ntb: NTB device context.
+ * @port: Peer port number (should be one of enum ntb_default_port).
+ *
+ * By default hardware driver supports just one peer device, so while
+ * specified port-argument indicates peer port from enum ntb_default_port,
+ * the return value shall be zero.
+ *
+ * NOTE Don't call this method directly. The ntb_peer_port_idx() function
+ * should be used instead.
+ *
+ * Return: the peer port index or negative value indicating an error
+ */
+int ntb_default_peer_port_idx(struct ntb_dev *ntb, int port);
+
+/**
+ * ntb_port_number() - get the local port number
+ * @ntb: NTB device context.
+ *
+ * Hardware must support at least simple two-ports ntb connection
+ *
+ * Return: the local port number
+ */
+static inline int ntb_port_number(struct ntb_dev *ntb)
{
- return ntb->ops->mw_count(ntb);
+ if (!ntb->ops->port_number)
+ return ntb_default_port_number(ntb);
+
+ return ntb->ops->port_number(ntb);
}
/**
- * ntb_mw_get_range() - get the range of a memory window
+ * ntb_peer_port_count() - get the number of peer device ports
* @ntb: NTB device context.
- * @idx: Memory window number.
- * @base: OUT - the base address for mapping the memory window
- * @size: OUT - the size for mapping the memory window
- * @align: OUT - the base alignment for translating the memory window
- * @align_size: OUT - the size alignment for translating the memory window
*
- * Get the range of a memory window. NULL may be given for any output
- * parameter if the value is not needed. The base and size may be used for
- * mapping the memory window, to access the peer memory. The alignment and
- * size may be used for translating the memory window, for the peer to access
- * memory on the local system.
+ * Hardware may support an access to memory of several remote domains
+ * over multi-port NTB devices. This method returns the number of peers,
+ * local device can have shared memory with.
*
- * Return: Zero on success, otherwise an error number.
+ * Return: the number of peer ports
*/
-static inline int ntb_mw_get_range(struct ntb_dev *ntb, int idx,
- phys_addr_t *base, resource_size_t *size,
- resource_size_t *align, resource_size_t *align_size)
+static inline int ntb_peer_port_count(struct ntb_dev *ntb)
{
- return ntb->ops->mw_get_range(ntb, idx, base, size,
- align, align_size);
+ if (!ntb->ops->peer_port_count)
+ return ntb_default_peer_port_count(ntb);
+
+ return ntb->ops->peer_port_count(ntb);
}
/**
- * ntb_mw_set_trans() - set the translation of a memory window
+ * ntb_peer_port_number() - get the peer port by given index
* @ntb: NTB device context.
- * @idx: Memory window number.
- * @addr: The dma address local memory to expose to the peer.
- * @size: The size of the local memory to expose to the peer.
+ * @pidx: Peer port index.
*
- * Set the translation of a memory window. The peer may access local memory
- * through the window starting at the address, up to the size. The address
- * must be aligned to the alignment specified by ntb_mw_get_range(). The size
- * must be aligned to the size alignment specified by ntb_mw_get_range().
+ * Peer ports are continuously enumerated by NTB API logic, so this method
+ * lets to retrieve port real number by its index.
*
- * Return: Zero on success, otherwise an error number.
+ * Return: the peer device port or negative value indicating an error
*/
-static inline int ntb_mw_set_trans(struct ntb_dev *ntb, int idx,
- dma_addr_t addr, resource_size_t size)
+static inline int ntb_peer_port_number(struct ntb_dev *ntb, int pidx)
{
- return ntb->ops->mw_set_trans(ntb, idx, addr, size);
+ if (!ntb->ops->peer_port_number)
+ return ntb_default_peer_port_number(ntb, pidx);
+
+ return ntb->ops->peer_port_number(ntb, pidx);
}
/**
- * ntb_mw_clear_trans() - clear the translation of a memory window
+ * ntb_peer_port_idx() - get the peer device port index by given port number
* @ntb: NTB device context.
- * @idx: Memory window number.
+ * @port: Peer port number.
*
- * Clear the translation of a memory window. The peer may no longer access
- * local memory through the window.
+ * Inverse operation of ntb_peer_port_number(), so one can get port index
+ * by specified port number.
*
- * Return: Zero on success, otherwise an error number.
+ * Return: the peer port index or negative value indicating an error
*/
-static inline int ntb_mw_clear_trans(struct ntb_dev *ntb, int idx)
+static inline int ntb_peer_port_idx(struct ntb_dev *ntb, int port)
{
- if (!ntb->ops->mw_clear_trans)
- return ntb->ops->mw_set_trans(ntb, idx, 0, 0);
+ if (!ntb->ops->peer_port_idx)
+ return ntb_default_peer_port_idx(ntb, port);
- return ntb->ops->mw_clear_trans(ntb, idx);
+ return ntb->ops->peer_port_idx(ntb, port);
}
/**
@@ -526,25 +674,26 @@
* state once after every link event. It is safe to query the link state in
* the context of the link event callback.
*
- * Return: One if the link is up, zero if the link is down, otherwise a
- * negative value indicating the error number.
+ * Return: bitfield of indexed ports link state: bit is set/cleared if the
+ * link is up/down respectively.
*/
-static inline int ntb_link_is_up(struct ntb_dev *ntb,
+static inline u64 ntb_link_is_up(struct ntb_dev *ntb,
enum ntb_speed *speed, enum ntb_width *width)
{
return ntb->ops->link_is_up(ntb, speed, width);
}
/**
- * ntb_link_enable() - enable the link on the secondary side of the ntb
+ * ntb_link_enable() - enable the local port ntb connection
* @ntb: NTB device context.
* @max_speed: The maximum link speed expressed as PCIe generation number.
* @max_width: The maximum link width expressed as the number of PCIe lanes.
*
- * Enable the link on the secondary side of the ntb. This can only be done
- * from the primary side of the ntb in primary or b2b topology. The ntb device
- * should train the link to its maximum speed and width, or the requested speed
- * and width, whichever is smaller, if supported.
+ * Enable the NTB/PCIe link on the local or remote (for bridge-to-bridge
+ * topology) side of the bridge. If it's supported the ntb device should train
+ * the link to its maximum speed and width, or the requested speed and width,
+ * whichever is smaller. Some hardware doesn't support PCIe link training, so
+ * the last two arguments will be ignored then.
*
* Return: Zero on success, otherwise an error number.
*/
@@ -556,14 +705,14 @@
}
/**
- * ntb_link_disable() - disable the link on the secondary side of the ntb
+ * ntb_link_disable() - disable the local port ntb connection
* @ntb: NTB device context.
*
- * Disable the link on the secondary side of the ntb. This can only be
- * done from the primary side of the ntb in primary or b2b topology. The ntb
- * device should disable the link. Returning from this call must indicate that
- * a barrier has passed, though with no more writes may pass in either
- * direction across the link, except if this call returns an error number.
+ * Disable the link on the local or remote (for b2b topology) of the ntb.
+ * The ntb device should disable the link. Returning from this call must
+ * indicate that a barrier has passed, though with no more writes may pass in
+ * either direction across the link, except if this call returns an error
+ * number.
*
* Return: Zero on success, otherwise an error number.
*/
@@ -573,6 +722,183 @@
}
/**
+ * ntb_mw_count() - get the number of inbound memory windows, which could
+ * be created for a specified peer device
+ * @ntb: NTB device context.
+ * @pidx: Port index of peer device.
+ *
+ * Hardware and topology may support a different number of memory windows.
+ * Moreover different peer devices can support different number of memory
+ * windows. Simply speaking this method returns the number of possible inbound
+ * memory windows to share with specified peer device.
+ *
+ * Return: the number of memory windows.
+ */
+static inline int ntb_mw_count(struct ntb_dev *ntb, int pidx)
+{
+ return ntb->ops->mw_count(ntb, pidx);
+}
+
+/**
+ * ntb_mw_get_align() - get the restriction parameters of inbound memory window
+ * @ntb: NTB device context.
+ * @pidx: Port index of peer device.
+ * @widx: Memory window index.
+ * @addr_align: OUT - the base alignment for translating the memory window
+ * @size_align: OUT - the size alignment for translating the memory window
+ * @size_max: OUT - the maximum size of the memory window
+ *
+ * Get the alignments of an inbound memory window with specified index.
+ * NULL may be given for any output parameter if the value is not needed.
+ * The alignment and size parameters may be used for allocation of proper
+ * shared memory.
+ *
+ * Return: Zero on success, otherwise a negative error number.
+ */
+static inline int ntb_mw_get_align(struct ntb_dev *ntb, int pidx, int widx,
+ resource_size_t *addr_align,
+ resource_size_t *size_align,
+ resource_size_t *size_max)
+{
+ return ntb->ops->mw_get_align(ntb, pidx, widx, addr_align, size_align,
+ size_max);
+}
+
+/**
+ * ntb_mw_set_trans() - set the translation of an inbound memory window
+ * @ntb: NTB device context.
+ * @pidx: Port index of peer device.
+ * @widx: Memory window index.
+ * @addr: The dma address of local memory to expose to the peer.
+ * @size: The size of the local memory to expose to the peer.
+ *
+ * Set the translation of a memory window. The peer may access local memory
+ * through the window starting at the address, up to the size. The address
+ * and size must be aligned in compliance with restrictions of
+ * ntb_mw_get_align(). The region size should not exceed the size_max parameter
+ * of that method.
+ *
+ * This method may not be implemented due to the hardware specific memory
+ * windows interface.
+ *
+ * Return: Zero on success, otherwise an error number.
+ */
+static inline int ntb_mw_set_trans(struct ntb_dev *ntb, int pidx, int widx,
+ dma_addr_t addr, resource_size_t size)
+{
+ if (!ntb->ops->mw_set_trans)
+ return 0;
+
+ return ntb->ops->mw_set_trans(ntb, pidx, widx, addr, size);
+}
+
+/**
+ * ntb_mw_clear_trans() - clear the translation address of an inbound memory
+ * window
+ * @ntb: NTB device context.
+ * @pidx: Port index of peer device.
+ * @widx: Memory window index.
+ *
+ * Clear the translation of an inbound memory window. The peer may no longer
+ * access local memory through the window.
+ *
+ * Return: Zero on success, otherwise an error number.
+ */
+static inline int ntb_mw_clear_trans(struct ntb_dev *ntb, int pidx, int widx)
+{
+ if (!ntb->ops->mw_clear_trans)
+ return ntb_mw_set_trans(ntb, pidx, widx, 0, 0);
+
+ return ntb->ops->mw_clear_trans(ntb, pidx, widx);
+}
+
+/**
+ * ntb_peer_mw_count() - get the number of outbound memory windows, which could
+ * be mapped to access a shared memory
+ * @ntb: NTB device context.
+ *
+ * Hardware and topology may support a different number of memory windows.
+ * This method returns the number of outbound memory windows supported by
+ * local device.
+ *
+ * Return: the number of memory windows.
+ */
+static inline int ntb_peer_mw_count(struct ntb_dev *ntb)
+{
+ return ntb->ops->peer_mw_count(ntb);
+}
+
+/**
+ * ntb_peer_mw_get_addr() - get map address of an outbound memory window
+ * @ntb: NTB device context.
+ * @widx: Memory window index (within ntb_peer_mw_count() return value).
+ * @base: OUT - the base address of mapping region.
+ * @size: OUT - the size of mapping region.
+ *
+ * Get base and size of memory region to map. NULL may be given for any output
+ * parameter if the value is not needed. The base and size may be used for
+ * mapping the memory window, to access the peer memory.
+ *
+ * Return: Zero on success, otherwise a negative error number.
+ */
+static inline int ntb_peer_mw_get_addr(struct ntb_dev *ntb, int widx,
+ phys_addr_t *base, resource_size_t *size)
+{
+ return ntb->ops->peer_mw_get_addr(ntb, widx, base, size);
+}
+
+/**
+ * ntb_peer_mw_set_trans() - set a translation address of a memory window
+ * retrieved from a peer device
+ * @ntb: NTB device context.
+ * @pidx: Port index of peer device the translation address received from.
+ * @widx: Memory window index.
+ * @addr: The dma address of the shared memory to access.
+ * @size: The size of the shared memory to access.
+ *
+ * Set the translation of an outbound memory window. The local device may
+ * access shared memory allocated by a peer device sent the address.
+ *
+ * This method may not be implemented due to the hardware specific memory
+ * windows interface, so a translation address can be only set on the side,
+ * where shared memory (inbound memory windows) is allocated.
+ *
+ * Return: Zero on success, otherwise an error number.
+ */
+static inline int ntb_peer_mw_set_trans(struct ntb_dev *ntb, int pidx, int widx,
+ u64 addr, resource_size_t size)
+{
+ if (!ntb->ops->peer_mw_set_trans)
+ return 0;
+
+ return ntb->ops->peer_mw_set_trans(ntb, pidx, widx, addr, size);
+}
+
+/**
+ * ntb_peer_mw_clear_trans() - clear the translation address of an outbound
+ * memory window
+ * @ntb: NTB device context.
+ * @pidx: Port index of peer device.
+ * @widx: Memory window index.
+ *
+ * Clear the translation of a outbound memory window. The local device may no
+ * longer access a shared memory through the window.
+ *
+ * This method may not be implemented due to the hardware specific memory
+ * windows interface.
+ *
+ * Return: Zero on success, otherwise an error number.
+ */
+static inline int ntb_peer_mw_clear_trans(struct ntb_dev *ntb, int pidx,
+ int widx)
+{
+ if (!ntb->ops->peer_mw_clear_trans)
+ return ntb_peer_mw_set_trans(ntb, pidx, widx, 0, 0);
+
+ return ntb->ops->peer_mw_clear_trans(ntb, pidx, widx);
+}
+
+/**
* ntb_db_is_unsafe() - check if it is safe to use hardware doorbell
* @ntb: NTB device context.
*
@@ -900,47 +1226,58 @@
* @ntb: NTB device context.
*
* Hardware and topology may support a different number of scratchpads.
+ * Although it must be the same for all ports per NTB device.
*
* Return: the number of scratchpads.
*/
static inline int ntb_spad_count(struct ntb_dev *ntb)
{
+ if (!ntb->ops->spad_count)
+ return 0;
+
return ntb->ops->spad_count(ntb);
}
/**
* ntb_spad_read() - read the local scratchpad register
* @ntb: NTB device context.
- * @idx: Scratchpad index.
+ * @sidx: Scratchpad index.
*
* Read the local scratchpad register, and return the value.
*
* Return: The value of the local scratchpad register.
*/
-static inline u32 ntb_spad_read(struct ntb_dev *ntb, int idx)
+static inline u32 ntb_spad_read(struct ntb_dev *ntb, int sidx)
{
- return ntb->ops->spad_read(ntb, idx);
+ if (!ntb->ops->spad_read)
+ return ~(u32)0;
+
+ return ntb->ops->spad_read(ntb, sidx);
}
/**
* ntb_spad_write() - write the local scratchpad register
* @ntb: NTB device context.
- * @idx: Scratchpad index.
+ * @sidx: Scratchpad index.
* @val: Scratchpad value.
*
* Write the value to the local scratchpad register.
*
* Return: Zero on success, otherwise an error number.
*/
-static inline int ntb_spad_write(struct ntb_dev *ntb, int idx, u32 val)
+static inline int ntb_spad_write(struct ntb_dev *ntb, int sidx, u32 val)
{
- return ntb->ops->spad_write(ntb, idx, val);
+ if (!ntb->ops->spad_write)
+ return -EINVAL;
+
+ return ntb->ops->spad_write(ntb, sidx, val);
}
/**
* ntb_peer_spad_addr() - address of the peer scratchpad register
* @ntb: NTB device context.
- * @idx: Scratchpad index.
+ * @pidx: Port index of peer device.
+ * @sidx: Scratchpad index.
* @spad_addr: OUT - The address of the peer scratchpad register.
*
* Return the address of the peer doorbell register. This may be used, for
@@ -948,45 +1285,213 @@
*
* Return: Zero on success, otherwise an error number.
*/
-static inline int ntb_peer_spad_addr(struct ntb_dev *ntb, int idx,
+static inline int ntb_peer_spad_addr(struct ntb_dev *ntb, int pidx, int sidx,
phys_addr_t *spad_addr)
{
if (!ntb->ops->peer_spad_addr)
return -EINVAL;
- return ntb->ops->peer_spad_addr(ntb, idx, spad_addr);
+ return ntb->ops->peer_spad_addr(ntb, pidx, sidx, spad_addr);
}
/**
* ntb_peer_spad_read() - read the peer scratchpad register
* @ntb: NTB device context.
- * @idx: Scratchpad index.
+ * @pidx: Port index of peer device.
+ * @sidx: Scratchpad index.
*
* Read the peer scratchpad register, and return the value.
*
* Return: The value of the local scratchpad register.
*/
-static inline u32 ntb_peer_spad_read(struct ntb_dev *ntb, int idx)
+static inline u32 ntb_peer_spad_read(struct ntb_dev *ntb, int pidx, int sidx)
{
if (!ntb->ops->peer_spad_read)
- return 0;
+ return ~(u32)0;
- return ntb->ops->peer_spad_read(ntb, idx);
+ return ntb->ops->peer_spad_read(ntb, pidx, sidx);
}
/**
* ntb_peer_spad_write() - write the peer scratchpad register
* @ntb: NTB device context.
- * @idx: Scratchpad index.
+ * @pidx: Port index of peer device.
+ * @sidx: Scratchpad index.
* @val: Scratchpad value.
*
* Write the value to the peer scratchpad register.
*
* Return: Zero on success, otherwise an error number.
*/
-static inline int ntb_peer_spad_write(struct ntb_dev *ntb, int idx, u32 val)
+static inline int ntb_peer_spad_write(struct ntb_dev *ntb, int pidx, int sidx,
+ u32 val)
{
- return ntb->ops->peer_spad_write(ntb, idx, val);
+ if (!ntb->ops->peer_spad_write)
+ return -EINVAL;
+
+ return ntb->ops->peer_spad_write(ntb, pidx, sidx, val);
+}
+
+/**
+ * ntb_msg_count() - get the number of message registers
+ * @ntb: NTB device context.
+ *
+ * Hardware may support a different number of message registers.
+ *
+ * Return: the number of message registers.
+ */
+static inline int ntb_msg_count(struct ntb_dev *ntb)
+{
+ if (!ntb->ops->msg_count)
+ return 0;
+
+ return ntb->ops->msg_count(ntb);
+}
+
+/**
+ * ntb_msg_inbits() - get a bitfield of inbound message registers status
+ * @ntb: NTB device context.
+ *
+ * The method returns the bitfield of status and mask registers, which related
+ * to inbound message registers.
+ *
+ * Return: bitfield of inbound message registers.
+ */
+static inline u64 ntb_msg_inbits(struct ntb_dev *ntb)
+{
+ if (!ntb->ops->msg_inbits)
+ return 0;
+
+ return ntb->ops->msg_inbits(ntb);
+}
+
+/**
+ * ntb_msg_outbits() - get a bitfield of outbound message registers status
+ * @ntb: NTB device context.
+ *
+ * The method returns the bitfield of status and mask registers, which related
+ * to outbound message registers.
+ *
+ * Return: bitfield of outbound message registers.
+ */
+static inline u64 ntb_msg_outbits(struct ntb_dev *ntb)
+{
+ if (!ntb->ops->msg_outbits)
+ return 0;
+
+ return ntb->ops->msg_outbits(ntb);
+}
+
+/**
+ * ntb_msg_read_sts() - read the message registers status
+ * @ntb: NTB device context.
+ *
+ * Read the status of message register. Inbound and outbound message registers
+ * related bits can be filtered by masks retrieved from ntb_msg_inbits() and
+ * ntb_msg_outbits().
+ *
+ * Return: status bits of message registers
+ */
+static inline u64 ntb_msg_read_sts(struct ntb_dev *ntb)
+{
+ if (!ntb->ops->msg_read_sts)
+ return 0;
+
+ return ntb->ops->msg_read_sts(ntb);
+}
+
+/**
+ * ntb_msg_clear_sts() - clear status bits of message registers
+ * @ntb: NTB device context.
+ * @sts_bits: Status bits to clear.
+ *
+ * Clear bits in the status register.
+ *
+ * Return: Zero on success, otherwise a negative error number.
+ */
+static inline int ntb_msg_clear_sts(struct ntb_dev *ntb, u64 sts_bits)
+{
+ if (!ntb->ops->msg_clear_sts)
+ return -EINVAL;
+
+ return ntb->ops->msg_clear_sts(ntb, sts_bits);
+}
+
+/**
+ * ntb_msg_set_mask() - set mask of message register status bits
+ * @ntb: NTB device context.
+ * @mask_bits: Mask bits.
+ *
+ * Mask the message registers status bits from raising the message event.
+ *
+ * Return: Zero on success, otherwise a negative error number.
+ */
+static inline int ntb_msg_set_mask(struct ntb_dev *ntb, u64 mask_bits)
+{
+ if (!ntb->ops->msg_set_mask)
+ return -EINVAL;
+
+ return ntb->ops->msg_set_mask(ntb, mask_bits);
+}
+
+/**
+ * ntb_msg_clear_mask() - clear message registers mask
+ * @ntb: NTB device context.
+ * @mask_bits: Mask bits to clear.
+ *
+ * Clear bits in the message events mask register.
+ *
+ * Return: Zero on success, otherwise a negative error number.
+ */
+static inline int ntb_msg_clear_mask(struct ntb_dev *ntb, u64 mask_bits)
+{
+ if (!ntb->ops->msg_clear_mask)
+ return -EINVAL;
+
+ return ntb->ops->msg_clear_mask(ntb, mask_bits);
+}
+
+/**
+ * ntb_msg_read() - read message register with specified index
+ * @ntb: NTB device context.
+ * @midx: Message register index
+ * @pidx: OUT - Port index of peer device a message retrieved from
+ * @msg: OUT - Data
+ *
+ * Read data from the specified message register. Source port index of a
+ * message is retrieved as well.
+ *
+ * Return: Zero on success, otherwise a negative error number.
+ */
+static inline int ntb_msg_read(struct ntb_dev *ntb, int midx, int *pidx,
+ u32 *msg)
+{
+ if (!ntb->ops->msg_read)
+ return -EINVAL;
+
+ return ntb->ops->msg_read(ntb, midx, pidx, msg);
+}
+
+/**
+ * ntb_msg_write() - write data to the specified message register
+ * @ntb: NTB device context.
+ * @midx: Message register index
+ * @pidx: Port index of peer device a message being sent to
+ * @msg: Data to send
+ *
+ * Send data to a specified peer device using the defined message register.
+ * Message event can be raised if the midx registers isn't empty while
+ * calling this method and the corresponding interrupt isn't masked.
+ *
+ * Return: Zero on success, otherwise a negative error number.
+ */
+static inline int ntb_msg_write(struct ntb_dev *ntb, int midx, int pidx,
+ u32 msg)
+{
+ if (!ntb->ops->msg_write)
+ return -EINVAL;
+
+ return ntb->ops->msg_write(ntb, midx, pidx, msg);
}
#endif
diff --git a/include/linux/nvme-fc.h b/include/linux/nvme-fc.h
index 21c37e3..36cca93 100644
--- a/include/linux/nvme-fc.h
+++ b/include/linux/nvme-fc.h
@@ -334,5 +334,24 @@
#define NVME_FC_LS_TIMEOUT_SEC 2 /* 2 seconds */
#define NVME_FC_TGTOP_TIMEOUT_SEC 2 /* 2 seconds */
+/*
+ * TRADDR string must be of form "nn-<16hexdigits>:pn-<16hexdigits>"
+ * the string is allowed to be specified with or without a "0x" prefix
+ * infront of the <16hexdigits>. Without is considered the "min" string
+ * and with is considered the "max" string. The hexdigits may be upper
+ * or lower case.
+ */
+#define NVME_FC_TRADDR_NNLEN 3 /* "?n-" */
+#define NVME_FC_TRADDR_OXNNLEN 5 /* "?n-0x" */
+#define NVME_FC_TRADDR_HEXNAMELEN 16
+#define NVME_FC_TRADDR_MINLENGTH \
+ (2 * (NVME_FC_TRADDR_NNLEN + NVME_FC_TRADDR_HEXNAMELEN) + 1)
+#define NVME_FC_TRADDR_MAXLENGTH \
+ (2 * (NVME_FC_TRADDR_OXNNLEN + NVME_FC_TRADDR_HEXNAMELEN) + 1)
+#define NVME_FC_TRADDR_MIN_PN_OFFSET \
+ (NVME_FC_TRADDR_NNLEN + NVME_FC_TRADDR_HEXNAMELEN + 1)
+#define NVME_FC_TRADDR_MAX_PN_OFFSET \
+ (NVME_FC_TRADDR_OXNNLEN + NVME_FC_TRADDR_HEXNAMELEN + 1)
+
#endif /* _NVME_FC_H */
diff --git a/include/linux/nvme.h b/include/linux/nvme.h
index 6b8ee9e..25d8225 100644
--- a/include/linux/nvme.h
+++ b/include/linux/nvme.h
@@ -963,14 +963,14 @@
};
struct streams_directive_params {
- __u16 msl;
- __u16 nssa;
- __u16 nsso;
+ __le16 msl;
+ __le16 nssa;
+ __le16 nsso;
__u8 rsvd[10];
- __u32 sws;
- __u16 sgs;
- __u16 nsa;
- __u16 nso;
+ __le32 sws;
+ __le16 sgs;
+ __le16 nsa;
+ __le16 nso;
__u8 rsvd2[6];
};
@@ -1006,7 +1006,7 @@
* Why can't we simply have a Fabrics In and Fabrics out command?
*/
if (unlikely(cmd->common.opcode == nvme_fabrics_command))
- return cmd->fabrics.opcode & 1;
+ return cmd->fabrics.fctype & 1;
return cmd->common.opcode & 1;
}
diff --git a/include/linux/nvmem-provider.h b/include/linux/nvmem-provider.h
index cd93416..497706f 100644
--- a/include/linux/nvmem-provider.h
+++ b/include/linux/nvmem-provider.h
@@ -12,6 +12,9 @@
#ifndef _LINUX_NVMEM_PROVIDER_H
#define _LINUX_NVMEM_PROVIDER_H
+#include <linux/err.h>
+#include <linux/errno.h>
+
struct nvmem_device;
struct nvmem_cell_info;
typedef int (*nvmem_reg_read_t)(void *priv, unsigned int offset,
diff --git a/include/linux/once.h b/include/linux/once.h
index 285f12c..9c98aaa 100644
--- a/include/linux/once.h
+++ b/include/linux/once.h
@@ -53,5 +53,7 @@
#define get_random_once(buf, nbytes) \
DO_ONCE(get_random_bytes, (buf), (nbytes))
+#define get_random_once_wait(buf, nbytes) \
+ DO_ONCE(get_random_bytes_wait, (buf), (nbytes)) \
#endif /* _LINUX_ONCE_H */
diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h
index baa9344..79b36f5 100644
--- a/include/linux/pagemap.h
+++ b/include/linux/pagemap.h
@@ -163,8 +163,6 @@
*/
static inline int page_cache_get_speculative(struct page *page)
{
- VM_BUG_ON(in_interrupt());
-
#ifdef CONFIG_TINY_RCU
# ifdef CONFIG_PREEMPT_COUNT
VM_BUG_ON(!in_atomic() && !irqs_disabled());
diff --git a/include/linux/path.h b/include/linux/path.h
index d137218..cde895c 100644
--- a/include/linux/path.h
+++ b/include/linux/path.h
@@ -7,7 +7,7 @@
struct path {
struct vfsmount *mnt;
struct dentry *dentry;
-};
+} __randomize_layout;
extern void path_get(const struct path *);
extern void path_put(const struct path *);
diff --git a/include/linux/perf/arm_pmu.h b/include/linux/perf/arm_pmu.h
index 1360dd6..af0f44ef 100644
--- a/include/linux/perf/arm_pmu.h
+++ b/include/linux/perf/arm_pmu.h
@@ -24,10 +24,14 @@
* interrupt and passed the address of the low level handler,
* and can be used to implement any platform specific handling
* before or after calling it.
+ *
+ * @irq_flags: if non-zero, these flags will be passed to request_irq
+ * when requesting interrupts for this PMU device.
*/
struct arm_pmu_platdata {
irqreturn_t (*handle_irq)(int irq, void *dev,
irq_handler_t pmu_handler);
+ unsigned long irq_flags;
};
#ifdef CONFIG_ARM_PMU
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 2a9567b..0bb5b21 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -830,7 +830,7 @@
dev_err(&_phydev->mdio.dev, format, ##args)
#define phydev_dbg(_phydev, format, args...) \
- dev_dbg(&_phydev->mdio.dev, format, ##args);
+ dev_dbg(&_phydev->mdio.dev, format, ##args)
static inline const char *phydev_name(const struct phy_device *phydev)
{
diff --git a/include/linux/pid_namespace.h b/include/linux/pid_namespace.h
index c2a989d..b09136f 100644
--- a/include/linux/pid_namespace.h
+++ b/include/linux/pid_namespace.h
@@ -52,7 +52,7 @@
int hide_pid;
int reboot; /* group exit code if this pidns was rebooted */
struct ns_common ns;
-};
+} __randomize_layout;
extern struct pid_namespace init_pid_ns;
diff --git a/include/linux/platform_data/hsmmc-omap.h b/include/linux/platform_data/hsmmc-omap.h
index 8e981be..0ff1e0d 100644
--- a/include/linux/platform_data/hsmmc-omap.h
+++ b/include/linux/platform_data/hsmmc-omap.h
@@ -55,9 +55,6 @@
u32 caps; /* Used for the MMC driver on 2430 and later */
u32 pm_caps; /* PM capabilities of the mmc */
- /* use the internal clock */
- unsigned internal_clock:1;
-
/* nonremovable e.g. eMMC */
unsigned nonremovable:1;
@@ -73,13 +70,6 @@
int gpio_cd; /* gpio (card detect) */
int gpio_cod; /* gpio (cover detect) */
int gpio_wp; /* gpio (write protect) */
-
- int (*set_power)(struct device *dev, int power_on, int vdd);
- void (*remux)(struct device *dev, int power_on);
- /* Call back before enabling / disabling regulators */
- void (*before_set_reg)(struct device *dev, int power_on, int vdd);
- /* Call back after enabling / disabling regulators */
- void (*after_set_reg)(struct device *dev, int power_on, int vdd);
/* if we have special card, init it using this callback */
void (*init_card)(struct mmc_card *card);
diff --git a/include/linux/platform_data/usb-ohci-s3c2410.h b/include/linux/platform_data/usb-ohci-s3c2410.h
index 7fa1fbe..cc7554a 100644
--- a/include/linux/platform_data/usb-ohci-s3c2410.h
+++ b/include/linux/platform_data/usb-ohci-s3c2410.h
@@ -31,7 +31,7 @@
void (*report_oc)(struct s3c2410_hcd_info *, int ports);
};
-static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports)
+static inline void s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports)
{
if (info->report_oc != NULL) {
(info->report_oc)(info, ports);
diff --git a/include/linux/proc_ns.h b/include/linux/proc_ns.h
index 58ab28d..06844b5 100644
--- a/include/linux/proc_ns.h
+++ b/include/linux/proc_ns.h
@@ -21,7 +21,7 @@
int (*install)(struct nsproxy *nsproxy, struct ns_common *ns);
struct user_namespace *(*owner)(struct ns_common *ns);
struct ns_common *(*get_parent)(struct ns_common *ns);
-};
+} __randomize_layout;
extern const struct proc_ns_operations netns_operations;
extern const struct proc_ns_operations utsns_operations;
diff --git a/include/linux/random.h b/include/linux/random.h
index ed5c383..eafea6a 100644
--- a/include/linux/random.h
+++ b/include/linux/random.h
@@ -34,6 +34,7 @@
extern void add_interrupt_randomness(int irq, int irq_flags) __latent_entropy;
extern void get_random_bytes(void *buf, int nbytes);
+extern int wait_for_random_bytes(void);
extern int add_random_ready_callback(struct random_ready_callback *rdy);
extern void del_random_ready_callback(struct random_ready_callback *rdy);
extern void get_random_bytes_arch(void *buf, int nbytes);
@@ -57,6 +58,52 @@
#endif
}
+/*
+ * On 64-bit architectures, protect against non-terminated C string overflows
+ * by zeroing out the first byte of the canary; this leaves 56 bits of entropy.
+ */
+#ifdef CONFIG_64BIT
+# ifdef __LITTLE_ENDIAN
+# define CANARY_MASK 0xffffffffffffff00UL
+# else /* big endian, 64 bits: */
+# define CANARY_MASK 0x00ffffffffffffffUL
+# endif
+#else /* 32 bits: */
+# define CANARY_MASK 0xffffffffUL
+#endif
+
+static inline unsigned long get_random_canary(void)
+{
+ unsigned long val = get_random_long();
+
+ return val & CANARY_MASK;
+}
+
+/* Calls wait_for_random_bytes() and then calls get_random_bytes(buf, nbytes).
+ * Returns the result of the call to wait_for_random_bytes. */
+static inline int get_random_bytes_wait(void *buf, int nbytes)
+{
+ int ret = wait_for_random_bytes();
+ if (unlikely(ret))
+ return ret;
+ get_random_bytes(buf, nbytes);
+ return 0;
+}
+
+#define declare_get_random_var_wait(var) \
+ static inline int get_random_ ## var ## _wait(var *out) { \
+ int ret = wait_for_random_bytes(); \
+ if (unlikely(ret)) \
+ return ret; \
+ *out = get_random_ ## var(); \
+ return 0; \
+ }
+declare_get_random_var_wait(u32)
+declare_get_random_var_wait(u64)
+declare_get_random_var_wait(int)
+declare_get_random_var_wait(long)
+#undef declare_get_random_var
+
unsigned long randomize_page(unsigned long start, unsigned long range);
u32 prandom_u32(void);
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index f816fc7..8e920f0 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -408,6 +408,22 @@
})
/**
+ * rcu_swap_protected() - swap an RCU and a regular pointer
+ * @rcu_ptr: RCU pointer
+ * @ptr: regular pointer
+ * @c: the conditions under which the dereference will take place
+ *
+ * Perform swap(@rcu_ptr, @ptr) where @rcu_ptr is an RCU-annotated pointer and
+ * @c is the argument that is passed to the rcu_dereference_protected() call
+ * used to read that pointer.
+ */
+#define rcu_swap_protected(rcu_ptr, ptr, c) do { \
+ typeof(ptr) __tmp = rcu_dereference_protected((rcu_ptr), (c)); \
+ rcu_assign_pointer((rcu_ptr), (ptr)); \
+ (ptr) = __tmp; \
+} while (0)
+
+/**
* rcu_access_pointer() - fetch RCU pointer with no dereferencing
* @p: The pointer to read
*
diff --git a/include/linux/rtc.h b/include/linux/rtc.h
index b693ada..0a0f0d1 100644
--- a/include/linux/rtc.h
+++ b/include/linux/rtc.h
@@ -14,6 +14,7 @@
#include <linux/types.h>
#include <linux/interrupt.h>
+#include <linux/nvmem-provider.h>
#include <uapi/linux/rtc.h>
extern int rtc_month_days(unsigned int month, unsigned int year);
@@ -32,17 +33,11 @@
return rtc_tm_to_time64(lhs) - rtc_tm_to_time64(rhs);
}
-/**
- * Deprecated. Use rtc_time64_to_tm().
- */
static inline void rtc_time_to_tm(unsigned long time, struct rtc_time *tm)
{
rtc_time64_to_tm(time, tm);
}
-/**
- * Deprecated. Use rtc_tm_to_time64().
- */
static inline int rtc_tm_to_time(struct rtc_time *tm, unsigned long *time)
{
*time = rtc_tm_to_time64(tm);
@@ -116,7 +111,6 @@
struct module *owner;
int id;
- char name[RTC_DEVICE_NAME_SIZE];
const struct rtc_class_ops *ops;
struct mutex ops_lock;
@@ -143,6 +137,14 @@
/* Some hardware can't support UIE mode */
int uie_unsupported;
+ bool registered;
+
+ struct nvmem_config *nvmem_config;
+ struct nvmem_device *nvmem;
+ /* Old ABI support */
+ bool nvram_old_abi;
+ struct bin_attribute *nvram;
+
#ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL
struct work_struct uie_task;
struct timer_list uie_timer;
@@ -164,6 +166,8 @@
const char *name,
const struct rtc_class_ops *ops,
struct module *owner);
+struct rtc_device *devm_rtc_allocate_device(struct device *dev);
+int __rtc_register_device(struct module *owner, struct rtc_device *rtc);
extern void rtc_device_unregister(struct rtc_device *rtc);
extern void devm_rtc_device_unregister(struct device *dev,
struct rtc_device *rtc);
@@ -219,6 +223,9 @@
return (!(year % 4) && (year % 100)) || !(year % 400);
}
+#define rtc_register_device(device) \
+ __rtc_register_device(THIS_MODULE, device)
+
#ifdef CONFIG_RTC_HCTOSYS_DEVICE
extern int rtc_hctosys_ret;
#else
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 20814b7..8337e2d 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -426,7 +426,7 @@
/* rq "owned" by this entity/group: */
struct rt_rq *my_q;
#endif
-};
+} __randomize_layout;
struct sched_dl_entity {
struct rb_node rb_node;
@@ -526,6 +526,13 @@
#endif
/* -1 unrunnable, 0 runnable, >0 stopped: */
volatile long state;
+
+ /*
+ * This begins the randomizable portion of task_struct. Only
+ * scheduling-critical items should be added above here.
+ */
+ randomized_struct_fields_start
+
void *stack;
atomic_t usage;
/* Per task flags (PF_*), defined further below: */
@@ -974,6 +981,7 @@
#ifdef CONFIG_FAULT_INJECTION
int make_it_fail;
+ unsigned int fail_nth;
#endif
/*
* When (nr_dirtied >= nr_dirtied_pause), it's time to call
@@ -1078,6 +1086,13 @@
/* Used by LSM modules for access restriction: */
void *security;
#endif
+
+ /*
+ * New fields for task_struct should be added above here, so that
+ * they are included in the randomized portion of task_struct.
+ */
+ randomized_struct_fields_end
+
/* CPU-specific state of this task: */
struct thread_struct thread;
diff --git a/include/linux/sched/signal.h b/include/linux/sched/signal.h
index c06d63b3..2a0dd40 100644
--- a/include/linux/sched/signal.h
+++ b/include/linux/sched/signal.h
@@ -222,7 +222,7 @@
struct mutex cred_guard_mutex; /* guard against foreign influences on
* credential calculations
* (notably. ptrace) */
-};
+} __randomize_layout;
/*
* Bits in flags field of signal_struct.
diff --git a/include/linux/sem.h b/include/linux/sem.h
index 9edec92..de2deb8 100644
--- a/include/linux/sem.h
+++ b/include/linux/sem.h
@@ -8,11 +8,29 @@
struct task_struct;
+/* One semaphore structure for each semaphore in the system. */
+struct sem {
+ int semval; /* current value */
+ /*
+ * PID of the process that last modified the semaphore. For
+ * Linux, specifically these are:
+ * - semop
+ * - semctl, via SETVAL and SETALL.
+ * - at task exit when performing undo adjustments (see exit_sem).
+ */
+ int sempid;
+ spinlock_t lock; /* spinlock for fine-grained semtimedop */
+ struct list_head pending_alter; /* pending single-sop operations */
+ /* that alter the semaphore */
+ struct list_head pending_const; /* pending single-sop operations */
+ /* that do not alter the semaphore*/
+ time_t sem_otime; /* candidate for sem_otime */
+} ____cacheline_aligned_in_smp;
+
/* One sem_array data structure for each set of semaphores in the system. */
struct sem_array {
struct kern_ipc_perm sem_perm; /* permissions .. see ipc.h */
- time_t sem_ctime; /* last change time */
- struct sem *sem_base; /* ptr to first semaphore in array */
+ time_t sem_ctime; /* create/last semctl() time */
struct list_head pending_alter; /* pending operations */
/* that alter the array */
struct list_head pending_const; /* pending complex operations */
@@ -21,7 +39,9 @@
int sem_nsems; /* no. of semaphores in array */
int complex_count; /* pending complex operations */
unsigned int use_global_lock;/* >0: global lock required */
-};
+
+ struct sem sems[];
+} __randomize_layout;
#ifdef CONFIG_SYSVIPC
diff --git a/include/linux/shm.h b/include/linux/shm.h
index 04e8818..0fb7061 100644
--- a/include/linux/shm.h
+++ b/include/linux/shm.h
@@ -22,7 +22,7 @@
/* The task created the shm object. NULL if the task is dead. */
struct task_struct *shm_creator;
struct list_head shm_clist; /* list by creator */
-};
+} __randomize_layout;
/* shm_mode upper byte flags */
#define SHM_DEST 01000 /* segment will be destroyed on last detach */
diff --git a/include/linux/slab.h b/include/linux/slab.h
index 04a7f79..41473df 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -471,7 +471,8 @@
*
* %__GFP_NOWARN - If allocation fails, don't issue any warnings.
*
- * %__GFP_REPEAT - If allocation fails initially, try once more before failing.
+ * %__GFP_RETRY_MAYFAIL - Try really hard to succeed the allocation but fail
+ * eventually.
*
* There are other flags available as well, but these are not intended
* for general use, and so are not documented here. For a full list of
diff --git a/include/linux/string.h b/include/linux/string.h
index 7439d83..a467e61 100644
--- a/include/linux/string.h
+++ b/include/linux/string.h
@@ -137,6 +137,7 @@
extern const char *kstrdup_const(const char *s, gfp_t gfp);
extern char *kstrndup(const char *s, size_t len, gfp_t gfp);
extern void *kmemdup(const void *src, size_t len, gfp_t gfp);
+extern char *kmemdup_nul(const char *s, size_t len, gfp_t gfp);
extern char **argv_split(gfp_t gfp, const char *str, int *argcp);
extern void argv_free(char **argv);
@@ -193,4 +194,205 @@
return tail ? tail + 1 : path;
}
+#define __FORTIFY_INLINE extern __always_inline __attribute__((gnu_inline))
+#define __RENAME(x) __asm__(#x)
+
+void fortify_panic(const char *name) __noreturn __cold;
+void __read_overflow(void) __compiletime_error("detected read beyond size of object passed as 1st parameter");
+void __read_overflow2(void) __compiletime_error("detected read beyond size of object passed as 2nd parameter");
+void __write_overflow(void) __compiletime_error("detected write beyond size of object passed as 1st parameter");
+
+#if !defined(__NO_FORTIFY) && defined(__OPTIMIZE__) && defined(CONFIG_FORTIFY_SOURCE)
+__FORTIFY_INLINE char *strncpy(char *p, const char *q, __kernel_size_t size)
+{
+ size_t p_size = __builtin_object_size(p, 0);
+ if (__builtin_constant_p(size) && p_size < size)
+ __write_overflow();
+ if (p_size < size)
+ fortify_panic(__func__);
+ return __builtin_strncpy(p, q, size);
+}
+
+__FORTIFY_INLINE char *strcat(char *p, const char *q)
+{
+ size_t p_size = __builtin_object_size(p, 0);
+ if (p_size == (size_t)-1)
+ return __builtin_strcat(p, q);
+ if (strlcat(p, q, p_size) >= p_size)
+ fortify_panic(__func__);
+ return p;
+}
+
+__FORTIFY_INLINE __kernel_size_t strlen(const char *p)
+{
+ __kernel_size_t ret;
+ size_t p_size = __builtin_object_size(p, 0);
+ if (p_size == (size_t)-1)
+ return __builtin_strlen(p);
+ ret = strnlen(p, p_size);
+ if (p_size <= ret)
+ fortify_panic(__func__);
+ return ret;
+}
+
+extern __kernel_size_t __real_strnlen(const char *, __kernel_size_t) __RENAME(strnlen);
+__FORTIFY_INLINE __kernel_size_t strnlen(const char *p, __kernel_size_t maxlen)
+{
+ size_t p_size = __builtin_object_size(p, 0);
+ __kernel_size_t ret = __real_strnlen(p, maxlen < p_size ? maxlen : p_size);
+ if (p_size <= ret && maxlen != ret)
+ fortify_panic(__func__);
+ return ret;
+}
+
+/* defined after fortified strlen to reuse it */
+extern size_t __real_strlcpy(char *, const char *, size_t) __RENAME(strlcpy);
+__FORTIFY_INLINE size_t strlcpy(char *p, const char *q, size_t size)
+{
+ size_t ret;
+ size_t p_size = __builtin_object_size(p, 0);
+ size_t q_size = __builtin_object_size(q, 0);
+ if (p_size == (size_t)-1 && q_size == (size_t)-1)
+ return __real_strlcpy(p, q, size);
+ ret = strlen(q);
+ if (size) {
+ size_t len = (ret >= size) ? size - 1 : ret;
+ if (__builtin_constant_p(len) && len >= p_size)
+ __write_overflow();
+ if (len >= p_size)
+ fortify_panic(__func__);
+ __builtin_memcpy(p, q, len);
+ p[len] = '\0';
+ }
+ return ret;
+}
+
+/* defined after fortified strlen and strnlen to reuse them */
+__FORTIFY_INLINE char *strncat(char *p, const char *q, __kernel_size_t count)
+{
+ size_t p_len, copy_len;
+ size_t p_size = __builtin_object_size(p, 0);
+ size_t q_size = __builtin_object_size(q, 0);
+ if (p_size == (size_t)-1 && q_size == (size_t)-1)
+ return __builtin_strncat(p, q, count);
+ p_len = strlen(p);
+ copy_len = strnlen(q, count);
+ if (p_size < p_len + copy_len + 1)
+ fortify_panic(__func__);
+ __builtin_memcpy(p + p_len, q, copy_len);
+ p[p_len + copy_len] = '\0';
+ return p;
+}
+
+__FORTIFY_INLINE void *memset(void *p, int c, __kernel_size_t size)
+{
+ size_t p_size = __builtin_object_size(p, 0);
+ if (__builtin_constant_p(size) && p_size < size)
+ __write_overflow();
+ if (p_size < size)
+ fortify_panic(__func__);
+ return __builtin_memset(p, c, size);
+}
+
+__FORTIFY_INLINE void *memcpy(void *p, const void *q, __kernel_size_t size)
+{
+ size_t p_size = __builtin_object_size(p, 0);
+ size_t q_size = __builtin_object_size(q, 0);
+ if (__builtin_constant_p(size)) {
+ if (p_size < size)
+ __write_overflow();
+ if (q_size < size)
+ __read_overflow2();
+ }
+ if (p_size < size || q_size < size)
+ fortify_panic(__func__);
+ return __builtin_memcpy(p, q, size);
+}
+
+__FORTIFY_INLINE void *memmove(void *p, const void *q, __kernel_size_t size)
+{
+ size_t p_size = __builtin_object_size(p, 0);
+ size_t q_size = __builtin_object_size(q, 0);
+ if (__builtin_constant_p(size)) {
+ if (p_size < size)
+ __write_overflow();
+ if (q_size < size)
+ __read_overflow2();
+ }
+ if (p_size < size || q_size < size)
+ fortify_panic(__func__);
+ return __builtin_memmove(p, q, size);
+}
+
+extern void *__real_memscan(void *, int, __kernel_size_t) __RENAME(memscan);
+__FORTIFY_INLINE void *memscan(void *p, int c, __kernel_size_t size)
+{
+ size_t p_size = __builtin_object_size(p, 0);
+ if (__builtin_constant_p(size) && p_size < size)
+ __read_overflow();
+ if (p_size < size)
+ fortify_panic(__func__);
+ return __real_memscan(p, c, size);
+}
+
+__FORTIFY_INLINE int memcmp(const void *p, const void *q, __kernel_size_t size)
+{
+ size_t p_size = __builtin_object_size(p, 0);
+ size_t q_size = __builtin_object_size(q, 0);
+ if (__builtin_constant_p(size)) {
+ if (p_size < size)
+ __read_overflow();
+ if (q_size < size)
+ __read_overflow2();
+ }
+ if (p_size < size || q_size < size)
+ fortify_panic(__func__);
+ return __builtin_memcmp(p, q, size);
+}
+
+__FORTIFY_INLINE void *memchr(const void *p, int c, __kernel_size_t size)
+{
+ size_t p_size = __builtin_object_size(p, 0);
+ if (__builtin_constant_p(size) && p_size < size)
+ __read_overflow();
+ if (p_size < size)
+ fortify_panic(__func__);
+ return __builtin_memchr(p, c, size);
+}
+
+void *__real_memchr_inv(const void *s, int c, size_t n) __RENAME(memchr_inv);
+__FORTIFY_INLINE void *memchr_inv(const void *p, int c, size_t size)
+{
+ size_t p_size = __builtin_object_size(p, 0);
+ if (__builtin_constant_p(size) && p_size < size)
+ __read_overflow();
+ if (p_size < size)
+ fortify_panic(__func__);
+ return __real_memchr_inv(p, c, size);
+}
+
+extern void *__real_kmemdup(const void *src, size_t len, gfp_t gfp) __RENAME(kmemdup);
+__FORTIFY_INLINE void *kmemdup(const void *p, size_t size, gfp_t gfp)
+{
+ size_t p_size = __builtin_object_size(p, 0);
+ if (__builtin_constant_p(size) && p_size < size)
+ __read_overflow();
+ if (p_size < size)
+ fortify_panic(__func__);
+ return __real_kmemdup(p, size, gfp);
+}
+
+/* defined after fortified strlen and memcpy to reuse them */
+__FORTIFY_INLINE char *strcpy(char *p, const char *q)
+{
+ size_t p_size = __builtin_object_size(p, 0);
+ size_t q_size = __builtin_object_size(q, 0);
+ if (p_size == (size_t)-1 && q_size == (size_t)-1)
+ return __builtin_strcpy(p, q);
+ memcpy(p, q, strlen(q) + 1);
+ return p;
+}
+
+#endif
+
#endif /* _LINUX_STRING_H_ */
diff --git a/include/linux/sunrpc/clnt.h b/include/linux/sunrpc/clnt.h
index 6095ecb..55ef67b 100644
--- a/include/linux/sunrpc/clnt.h
+++ b/include/linux/sunrpc/clnt.h
@@ -39,7 +39,7 @@
struct list_head cl_tasks; /* List of tasks */
spinlock_t cl_lock; /* spinlock */
struct rpc_xprt __rcu * cl_xprt; /* transport */
- struct rpc_procinfo * cl_procinfo; /* procedure info */
+ const struct rpc_procinfo *cl_procinfo; /* procedure info */
u32 cl_prog, /* RPC program number */
cl_vers, /* RPC version number */
cl_maxproc; /* max procedure number */
@@ -87,7 +87,8 @@
struct rpc_version {
u32 number; /* version number */
unsigned int nrprocs; /* number of procs */
- struct rpc_procinfo * procs; /* procedure array */
+ const struct rpc_procinfo *procs; /* procedure array */
+ unsigned int *counts; /* call counts */
};
/*
@@ -99,7 +100,6 @@
kxdrdproc_t p_decode; /* XDR decode function */
unsigned int p_arglen; /* argument hdr length (u32) */
unsigned int p_replen; /* reply hdr length (u32) */
- unsigned int p_count; /* call count */
unsigned int p_timer; /* Which RTT timer to use */
u32 p_statidx; /* Which procedure to account */
const char * p_name; /* name of procedure */
diff --git a/include/linux/sunrpc/sched.h b/include/linux/sunrpc/sched.h
index 9d7529f..50a99a1 100644
--- a/include/linux/sunrpc/sched.h
+++ b/include/linux/sunrpc/sched.h
@@ -22,7 +22,7 @@
*/
struct rpc_procinfo;
struct rpc_message {
- struct rpc_procinfo * rpc_proc; /* Procedure information */
+ const struct rpc_procinfo *rpc_proc; /* Procedure information */
void * rpc_argp; /* Arguments */
void * rpc_resp; /* Result */
struct rpc_cred * rpc_cred; /* Credentials */
diff --git a/include/linux/sunrpc/svc.h b/include/linux/sunrpc/svc.h
index 11cef5a..a3f8af9 100644
--- a/include/linux/sunrpc/svc.h
+++ b/include/linux/sunrpc/svc.h
@@ -237,7 +237,7 @@
struct svc_serv * rq_server; /* RPC service definition */
struct svc_pool * rq_pool; /* thread pool */
- struct svc_procedure * rq_procinfo; /* procedure info */
+ const struct svc_procedure *rq_procinfo;/* procedure info */
struct auth_ops * rq_authop; /* authentication flavour */
struct svc_cred rq_cred; /* auth info */
void * rq_xprt_ctxt; /* transport specific context ptr */
@@ -246,7 +246,7 @@
size_t rq_xprt_hlen; /* xprt header len */
struct xdr_buf rq_arg;
struct xdr_buf rq_res;
- struct page * rq_pages[RPCSVC_MAXPAGES];
+ struct page *rq_pages[RPCSVC_MAXPAGES + 1];
struct page * *rq_respages; /* points into rq_pages */
struct page * *rq_next_page; /* next reply page to use */
struct page * *rq_page_end; /* one past the last page */
@@ -384,7 +384,7 @@
unsigned int pg_lovers; /* lowest version */
unsigned int pg_hivers; /* highest version */
unsigned int pg_nvers; /* number of versions */
- struct svc_version ** pg_vers; /* version array */
+ const struct svc_version **pg_vers; /* version array */
char * pg_name; /* service name */
char * pg_class; /* class name: services sharing authentication */
struct svc_stat * pg_stats; /* rpc statistics */
@@ -397,7 +397,8 @@
struct svc_version {
u32 vs_vers; /* version number */
u32 vs_nproc; /* number of procedures */
- struct svc_procedure * vs_proc; /* per-procedure info */
+ const struct svc_procedure *vs_proc; /* per-procedure info */
+ unsigned int *vs_count; /* call counts */
u32 vs_xdrsize; /* xdrsize needed for this version */
/* Don't register with rpcbind */
@@ -419,15 +420,17 @@
/*
* RPC procedure info
*/
-typedef __be32 (*svc_procfunc)(struct svc_rqst *, void *argp, void *resp);
struct svc_procedure {
- svc_procfunc pc_func; /* process the request */
- kxdrproc_t pc_decode; /* XDR decode args */
- kxdrproc_t pc_encode; /* XDR encode result */
- kxdrproc_t pc_release; /* XDR free result */
+ /* process the request: */
+ __be32 (*pc_func)(struct svc_rqst *);
+ /* XDR decode args: */
+ int (*pc_decode)(struct svc_rqst *, __be32 *data);
+ /* XDR encode result: */
+ int (*pc_encode)(struct svc_rqst *, __be32 *data);
+ /* XDR free result: */
+ void (*pc_release)(struct svc_rqst *);
unsigned int pc_argsize; /* argument struct size */
unsigned int pc_ressize; /* result struct size */
- unsigned int pc_count; /* call count */
unsigned int pc_cachetype; /* cache info (NFS) */
unsigned int pc_xdrressize; /* maximum size of XDR reply */
};
diff --git a/include/linux/sunrpc/svc_rdma.h b/include/linux/sunrpc/svc_rdma.h
index f3787d8..995c6fe 100644
--- a/include/linux/sunrpc/svc_rdma.h
+++ b/include/linux/sunrpc/svc_rdma.h
@@ -77,46 +77,25 @@
*/
struct svc_rdma_op_ctxt {
struct list_head list;
- struct svc_rdma_op_ctxt *read_hdr;
- struct svc_rdma_fastreg_mr *frmr;
- int hdr_count;
struct xdr_buf arg;
struct ib_cqe cqe;
- struct ib_cqe reg_cqe;
- struct ib_cqe inv_cqe;
u32 byte_len;
- u32 position;
struct svcxprt_rdma *xprt;
- unsigned long flags;
enum dma_data_direction direction;
int count;
unsigned int mapped_sges;
+ int hdr_count;
struct ib_send_wr send_wr;
struct ib_sge sge[1 + RPCRDMA_MAX_INLINE_THRESH / PAGE_SIZE];
struct page *pages[RPCSVC_MAXPAGES];
};
-struct svc_rdma_fastreg_mr {
- struct ib_mr *mr;
- struct scatterlist *sg;
- int sg_nents;
- unsigned long access_flags;
- enum dma_data_direction direction;
- struct list_head frmr_list;
-};
-
-#define RDMACTXT_F_LAST_CTXT 2
-
-#define SVCRDMA_DEVCAP_FAST_REG 1 /* fast mr registration */
-#define SVCRDMA_DEVCAP_READ_W_INV 2 /* read w/ invalidate */
-
struct svcxprt_rdma {
struct svc_xprt sc_xprt; /* SVC transport structure */
struct rdma_cm_id *sc_cm_id; /* RDMA connection id */
struct list_head sc_accept_q; /* Conn. waiting accept */
int sc_ord; /* RDMA read limit */
int sc_max_sge;
- int sc_max_sge_rd; /* max sge for read target */
bool sc_snd_w_inv; /* OK to use Send With Invalidate */
atomic_t sc_sq_avail; /* SQEs ready to be consumed */
@@ -141,14 +120,6 @@
struct ib_qp *sc_qp;
struct ib_cq *sc_rq_cq;
struct ib_cq *sc_sq_cq;
- int (*sc_reader)(struct svcxprt_rdma *,
- struct svc_rqst *,
- struct svc_rdma_op_ctxt *,
- int *, u32 *, u32, u32, u64, bool);
- u32 sc_dev_caps; /* distilled device caps */
- unsigned int sc_frmr_pg_list_len;
- struct list_head sc_frmr_q;
- spinlock_t sc_frmr_q_lock;
spinlock_t sc_lock; /* transport lock */
@@ -185,20 +156,14 @@
__be32 *rdma_resp,
struct xdr_buf *rcvbuf);
-/* svc_rdma_marshal.c */
-extern int svc_rdma_xdr_decode_req(struct xdr_buf *);
-
/* svc_rdma_recvfrom.c */
extern int svc_rdma_recvfrom(struct svc_rqst *);
-extern int rdma_read_chunk_lcl(struct svcxprt_rdma *, struct svc_rqst *,
- struct svc_rdma_op_ctxt *, int *, u32 *,
- u32, u32, u64, bool);
-extern int rdma_read_chunk_frmr(struct svcxprt_rdma *, struct svc_rqst *,
- struct svc_rdma_op_ctxt *, int *, u32 *,
- u32, u32, u64, bool);
/* svc_rdma_rw.c */
extern void svc_rdma_destroy_rw_ctxts(struct svcxprt_rdma *rdma);
+extern int svc_rdma_recv_read_chunk(struct svcxprt_rdma *rdma,
+ struct svc_rqst *rqstp,
+ struct svc_rdma_op_ctxt *head, __be32 *p);
extern int svc_rdma_send_write_chunk(struct svcxprt_rdma *rdma,
__be32 *wr_ch, struct xdr_buf *xdr);
extern int svc_rdma_send_reply_chunk(struct svcxprt_rdma *rdma,
@@ -226,9 +191,6 @@
extern struct svc_rdma_op_ctxt *svc_rdma_get_context(struct svcxprt_rdma *);
extern void svc_rdma_put_context(struct svc_rdma_op_ctxt *, int);
extern void svc_rdma_unmap_dma(struct svc_rdma_op_ctxt *ctxt);
-extern struct svc_rdma_fastreg_mr *svc_rdma_get_frmr(struct svcxprt_rdma *);
-extern void svc_rdma_put_frmr(struct svcxprt_rdma *,
- struct svc_rdma_fastreg_mr *);
extern void svc_sq_reap(struct svcxprt_rdma *);
extern void svc_rq_reap(struct svcxprt_rdma *);
extern void svc_rdma_prep_reply_hdr(struct svc_rqst *);
diff --git a/include/linux/sunrpc/xdr.h b/include/linux/sunrpc/xdr.h
index 054c8cd..261b48a 100644
--- a/include/linux/sunrpc/xdr.h
+++ b/include/linux/sunrpc/xdr.h
@@ -17,6 +17,8 @@
#include <asm/unaligned.h>
#include <linux/scatterlist.h>
+struct rpc_rqst;
+
/*
* Buffer adjustment
*/
@@ -33,13 +35,6 @@
};
/*
- * This is the legacy generic XDR function. rqstp is either a rpc_rqst
- * (client side) or svc_rqst pointer (server side).
- * Encode functions always assume there's enough room in the buffer.
- */
-typedef int (*kxdrproc_t)(void *rqstp, __be32 *data, void *obj);
-
-/*
* Basic structure for transmission/reception of a client XDR message.
* Features a header (for a linear buffer containing RPC headers
* and the data payload for short messages), and then an array of
@@ -222,8 +217,10 @@
/*
* These are the xdr_stream style generic XDR encode and decode functions.
*/
-typedef void (*kxdreproc_t)(void *rqstp, struct xdr_stream *xdr, void *obj);
-typedef int (*kxdrdproc_t)(void *rqstp, struct xdr_stream *xdr, void *obj);
+typedef void (*kxdreproc_t)(struct rpc_rqst *rqstp, struct xdr_stream *xdr,
+ const void *obj);
+typedef int (*kxdrdproc_t)(struct rpc_rqst *rqstp, struct xdr_stream *xdr,
+ void *obj);
extern void xdr_init_encode(struct xdr_stream *xdr, struct xdr_buf *buf, __be32 *p);
extern __be32 *xdr_reserve_space(struct xdr_stream *xdr, size_t nbytes);
diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
index 80d0781..1d4dba4 100644
--- a/include/linux/sysctl.h
+++ b/include/linux/sysctl.h
@@ -47,6 +47,9 @@
void __user *, size_t *, loff_t *);
extern int proc_dointvec_minmax(struct ctl_table *, int,
void __user *, size_t *, loff_t *);
+extern int proc_douintvec_minmax(struct ctl_table *table, int write,
+ void __user *buffer, size_t *lenp,
+ loff_t *ppos);
extern int proc_dointvec_jiffies(struct ctl_table *, int,
void __user *, size_t *, loff_t *);
extern int proc_dointvec_userhz_jiffies(struct ctl_table *, int,
@@ -117,7 +120,7 @@
struct ctl_table_poll *poll;
void *extra1;
void *extra2;
-};
+} __randomize_layout;
struct ctl_node {
struct rb_node node;
@@ -143,7 +146,7 @@
struct ctl_table_set *set;
struct ctl_dir *parent;
struct ctl_node *node;
- struct list_head inodes; /* head for proc_inode->sysctl_inodes */
+ struct hlist_head inodes; /* head for proc_inode->sysctl_inodes */
};
struct ctl_dir {
diff --git a/include/linux/trace_events.h b/include/linux/trace_events.h
index f73cedf..536c80f 100644
--- a/include/linux/trace_events.h
+++ b/include/linux/trace_events.h
@@ -338,7 +338,7 @@
struct trace_event_file {
struct list_head list;
struct trace_event_call *event_call;
- struct event_filter *filter;
+ struct event_filter __rcu *filter;
struct dentry *dir;
struct trace_array *tr;
struct trace_subsystem_dir *system;
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 69464c0..79c30da 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -332,7 +332,7 @@
/* If the tty has a pending do_SAK, queue it here - akpm */
struct work_struct SAK_work;
struct tty_port *port;
-};
+} __randomize_layout;
/* Each of a tty's open files has private_data pointing to tty_file_private */
struct tty_file_private {
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index b742b5e..00b2213 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -291,7 +291,7 @@
void (*poll_put_char)(struct tty_driver *driver, int line, char ch);
#endif
const struct file_operations *proc_fops;
-};
+} __randomize_layout;
struct tty_driver {
int magic; /* magic number for this structure */
@@ -325,7 +325,7 @@
const struct tty_operations *ops;
struct list_head tty_drivers;
-};
+} __randomize_layout;
extern struct list_head tty_drivers;
diff --git a/include/linux/usb/audio-v2.h b/include/linux/usb/audio-v2.h
index c5f2158..fd73bc0 100644
--- a/include/linux/usb/audio-v2.h
+++ b/include/linux/usb/audio-v2.h
@@ -115,13 +115,13 @@
__u8 bDescriptorType;
__u8 bDescriptorSubtype;
__u8 bTerminalID;
- __u16 wTerminalType;
+ __le16 wTerminalType;
__u8 bAssocTerminal;
__u8 bCSourceID;
__u8 bNrChannels;
- __u32 bmChannelConfig;
+ __le32 bmChannelConfig;
__u8 iChannelNames;
- __u16 bmControls;
+ __le16 bmControls;
__u8 iTerminal;
} __attribute__((packed));
@@ -132,11 +132,11 @@
__u8 bDescriptorType;
__u8 bDescriptorSubtype;
__u8 bTerminalID;
- __u16 wTerminalType;
+ __le16 wTerminalType;
__u8 bAssocTerminal;
__u8 bSourceID;
__u8 bCSourceID;
- __u16 bmControls;
+ __le16 bmControls;
__u8 iTerminal;
} __attribute__((packed));
@@ -164,9 +164,9 @@
__u8 bTerminalLink;
__u8 bmControls;
__u8 bFormatType;
- __u32 bmFormats;
+ __le32 bmFormats;
__u8 bNrChannels;
- __u32 bmChannelConfig;
+ __le32 bmChannelConfig;
__u8 iChannelNames;
} __attribute__((packed));
diff --git a/include/linux/usb/cdc_ncm.h b/include/linux/usb/cdc_ncm.h
index 021f7a8..1a59699 100644
--- a/include/linux/usb/cdc_ncm.h
+++ b/include/linux/usb/cdc_ncm.h
@@ -83,6 +83,7 @@
/* Driver flags */
#define CDC_NCM_FLAG_NDP_TO_END 0x02 /* NDP is placed at end of frame */
#define CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE 0x04 /* Avoid altsetting toggle during init */
+#define CDC_NCM_FLAG_RESET_NTB16 0x08 /* set NDP16 one more time after altsetting switch */
#define cdc_ncm_comm_intf_is_mbim(x) ((x)->desc.bInterfaceSubClass == USB_CDC_SUBCLASS_MBIM && \
(x)->desc.bInterfaceProtocol == USB_CDC_PROTO_NONE)
diff --git a/include/linux/user_namespace.h b/include/linux/user_namespace.h
index 32354b4..b3575ce 100644
--- a/include/linux/user_namespace.h
+++ b/include/linux/user_namespace.h
@@ -66,7 +66,7 @@
#endif
struct ucounts *ucounts;
int ucount_max[UCOUNT_COUNTS];
-};
+} __randomize_layout;
struct ucounts {
struct hlist_node node;
diff --git a/include/linux/utsname.h b/include/linux/utsname.h
index 60f0bb8..da826ed 100644
--- a/include/linux/utsname.h
+++ b/include/linux/utsname.h
@@ -26,7 +26,7 @@
struct user_namespace *user_ns;
struct ucounts *ucounts;
struct ns_common ns;
-};
+} __randomize_layout;
extern struct uts_namespace init_uts_ns;
#ifdef CONFIG_UTS_NS
diff --git a/include/linux/uuid.h b/include/linux/uuid.h
index 2251e19..33b0bdb 100644
--- a/include/linux/uuid.h
+++ b/include/linux/uuid.h
@@ -84,26 +84,12 @@
int uuid_parse(const char *uuid, uuid_t *u);
/* backwards compatibility, don't use in new code */
-typedef uuid_t uuid_be;
-#define UUID_BE(a, _b, c, d0, d1, d2, d3, d4, d5, d6, d7) \
- UUID_INIT(a, _b, c, d0, d1, d2, d3, d4, d5, d6, d7)
-#define NULL_UUID_BE \
- UUID_BE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00, \
- 0x00, 0x00, 0x00, 0x00)
-
#define uuid_le_gen(u) guid_gen(u)
-#define uuid_be_gen(u) uuid_gen(u)
#define uuid_le_to_bin(guid, u) guid_parse(guid, u)
-#define uuid_be_to_bin(uuid, u) uuid_parse(uuid, u)
static inline int uuid_le_cmp(const guid_t u1, const guid_t u2)
{
return memcmp(&u1, &u2, sizeof(guid_t));
}
-static inline int uuid_be_cmp(const uuid_t u1, const uuid_t u2)
-{
- return memcmp(&u1, &u2, sizeof(uuid_t));
-}
-
#endif
diff --git a/include/linux/vfio.h b/include/linux/vfio.h
index f57076b..a47b985 100644
--- a/include/linux/vfio.h
+++ b/include/linux/vfio.h
@@ -97,6 +97,8 @@
*/
extern struct vfio_group *vfio_group_get_external_user(struct file *filep);
extern void vfio_group_put_external_user(struct vfio_group *group);
+extern bool vfio_external_group_match_file(struct vfio_group *group,
+ struct file *filep);
extern int vfio_external_user_iommu_id(struct vfio_group *group);
extern long vfio_external_check_extension(struct vfio_group *group,
unsigned long arg);
@@ -150,7 +152,7 @@
size_t *data_size);
struct pci_dev;
-#ifdef CONFIG_EEH
+#if IS_ENABLED(CONFIG_VFIO_SPAPR_EEH)
extern void vfio_spapr_pci_eeh_open(struct pci_dev *pdev);
extern void vfio_spapr_pci_eeh_release(struct pci_dev *pdev);
extern long vfio_spapr_iommu_eeh_ioctl(struct iommu_group *group,
@@ -171,7 +173,7 @@
{
return -ENOTTY;
}
-#endif /* CONFIG_EEH */
+#endif /* CONFIG_VFIO_SPAPR_EEH */
/*
* IRQfd - generic
diff --git a/include/linux/wait.h b/include/linux/wait.h
index b289c96..5b74e36 100644
--- a/include/linux/wait.h
+++ b/include/linux/wait.h
@@ -529,13 +529,13 @@
/**
* wait_event_interruptible_hrtimeout - sleep until a condition gets true or a timeout elapses
- * @wq_head: the waitqueue to wait on
+ * @wq: the waitqueue to wait on
* @condition: a C expression for the event to wait for
* @timeout: timeout, as a ktime_t
*
* The process is put to sleep (TASK_INTERRUPTIBLE) until the
* @condition evaluates to true or a signal is received.
- * The @condition is checked each time the waitqueue @wq_head is woken up.
+ * The @condition is checked each time the waitqueue @wq is woken up.
*
* wake_up() has to be called after changing any variable that could
* change the result of the wait condition.
@@ -735,12 +735,12 @@
/**
* wait_event_killable - sleep until a condition gets true
- * @wq: the waitqueue to wait on
+ * @wq_head: the waitqueue to wait on
* @condition: a C expression for the event to wait for
*
* The process is put to sleep (TASK_KILLABLE) until the
* @condition evaluates to true or a signal is received.
- * The @condition is checked each time the waitqueue @wq is woken up.
+ * The @condition is checked each time the waitqueue @wq_head is woken up.
*
* wake_up() has to be called after changing any variable that could
* change the result of the wait condition.
diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h
index c102ef6..db6dc9d 100644
--- a/include/linux/workqueue.h
+++ b/include/linux/workqueue.h
@@ -323,6 +323,7 @@
__WQ_DRAINING = 1 << 16, /* internal: workqueue is draining */
__WQ_ORDERED = 1 << 17, /* internal: workqueue is ordered */
+ __WQ_ORDERED_EXPLICIT = 1 << 18, /* internal: alloc_ordered_workqueue() */
__WQ_LEGACY = 1 << 18, /* internal: create*_workqueue() */
WQ_MAX_ACTIVE = 512, /* I like 512, better ideas? */
@@ -422,7 +423,8 @@
* Pointer to the allocated workqueue on success, %NULL on failure.
*/
#define alloc_ordered_workqueue(fmt, flags, args...) \
- alloc_workqueue(fmt, WQ_UNBOUND | __WQ_ORDERED | (flags), 1, ##args)
+ alloc_workqueue(fmt, WQ_UNBOUND | __WQ_ORDERED | \
+ __WQ_ORDERED_EXPLICIT | (flags), 1, ##args)
#define create_workqueue(name) \
alloc_workqueue("%s", __WQ_LEGACY | WQ_MEM_RECLAIM, 1, (name))
diff --git a/include/media/cec-notifier.h b/include/media/cec-notifier.h
index 298f996..a4f7429 100644
--- a/include/media/cec-notifier.h
+++ b/include/media/cec-notifier.h
@@ -57,6 +57,7 @@
* @pa: the CEC physical address
*
* Set a new CEC physical address.
+ * Does nothing if @n == NULL.
*/
void cec_notifier_set_phys_addr(struct cec_notifier *n, u16 pa);
@@ -66,6 +67,7 @@
* @edid: the struct edid pointer
*
* Parses the EDID to obtain the new CEC physical address and set it.
+ * Does nothing if @n == NULL.
*/
void cec_notifier_set_phys_addr_from_edid(struct cec_notifier *n,
const struct edid *edid);
@@ -118,4 +120,17 @@
#endif
+/**
+ * cec_notifier_phys_addr_invalidate() - set the physical address to INVALID
+ *
+ * @n: the CEC notifier
+ *
+ * This is a simple helper function to invalidate the physical
+ * address. Does nothing if @n == NULL.
+ */
+static inline void cec_notifier_phys_addr_invalidate(struct cec_notifier *n)
+{
+ cec_notifier_set_phys_addr(n, CEC_PHYS_ADDR_INVALID);
+}
+
#endif
diff --git a/include/media/davinci/dm644x_ccdc.h b/include/media/davinci/dm644x_ccdc.h
index 7c909da..6ea2ce2 100644
--- a/include/media/davinci/dm644x_ccdc.h
+++ b/include/media/davinci/dm644x_ccdc.h
@@ -103,16 +103,6 @@
char gb;
};
-/* structure for fault pixel correction */
-struct ccdc_fault_pixel {
- /* Enable or Disable fault pixel correction */
- unsigned char enable;
- /* Number of fault pixel */
- unsigned short fp_num;
- /* Address of fault pixel table */
- unsigned long fpc_table_addr;
-};
-
/* Structure for CCDC configuration parameters for raw capture mode passed
* by application
*/
@@ -125,8 +115,6 @@
struct ccdc_black_clamp blk_clamp;
/* Structure for Black Compensation */
struct ccdc_black_compensation blk_comp;
- /* Structure for Fault Pixel Module Configuration */
- struct ccdc_fault_pixel fault_pxl;
};
diff --git a/include/media/davinci/vpfe_capture.h b/include/media/davinci/vpfe_capture.h
index 8e1a4d8..f003533 100644
--- a/include/media/davinci/vpfe_capture.h
+++ b/include/media/davinci/vpfe_capture.h
@@ -183,14 +183,4 @@
};
#endif /* End of __KERNEL__ */
-/**
- * VPFE_CMD_S_CCDC_RAW_PARAMS - EXPERIMENTAL IOCTL to set raw capture params
- * This can be used to configure modules such as defect pixel correction,
- * color space conversion, culling etc. This is an experimental ioctl that
- * will change in future kernels. So use this ioctl with care !
- * TODO: This is to be split into multiple ioctls and also explore the
- * possibility of extending the v4l2 api to include this
- **/
-#define VPFE_CMD_S_CCDC_RAW_PARAMS _IOW('V', BASE_VIDIOC_PRIVATE + 1, \
- void *)
#endif /* _DAVINCI_VPFE_H */
diff --git a/include/net/9p/client.h b/include/net/9p/client.h
index b582339..7af9d76 100644
--- a/include/net/9p/client.h
+++ b/include/net/9p/client.h
@@ -157,6 +157,18 @@
enum p9_trans_status status;
void *trans;
+ union {
+ struct {
+ int rfd;
+ int wfd;
+ } fd;
+ struct {
+ u16 port;
+ bool privport;
+
+ } tcp;
+ } trans_opts;
+
struct p9_idpool *fidpool;
struct list_head fidlist;
@@ -213,6 +225,7 @@
struct iov_iter;
+int p9_show_client_options(struct seq_file *m, struct p9_client *clnt);
int p9_client_statfs(struct p9_fid *fid, struct p9_rstatfs *sb);
int p9_client_rename(struct p9_fid *fid, struct p9_fid *newdirfid,
const char *name);
diff --git a/include/net/9p/transport.h b/include/net/9p/transport.h
index 5122b5e..1625fb8 100644
--- a/include/net/9p/transport.h
+++ b/include/net/9p/transport.h
@@ -62,6 +62,7 @@
int (*cancelled)(struct p9_client *, struct p9_req_t *req);
int (*zc_request)(struct p9_client *, struct p9_req_t *,
struct iov_iter *, struct iov_iter *, int , int, int);
+ int (*show_options)(struct seq_file *, struct p9_client *);
};
void v9fs_register_trans(struct p9_trans_module *m);
diff --git a/include/net/af_unix.h b/include/net/af_unix.h
index 678e4d6..53b1a2c 100644
--- a/include/net/af_unix.h
+++ b/include/net/af_unix.h
@@ -37,7 +37,7 @@
u32 secid; /* Security ID */
#endif
u32 consumed;
-};
+} __randomize_layout;
#define UNIXCB(skb) (*(struct unix_skb_parms *)&((skb)->cb))
diff --git a/include/net/neighbour.h b/include/net/neighbour.h
index afc39e3..9816df2 100644
--- a/include/net/neighbour.h
+++ b/include/net/neighbour.h
@@ -156,7 +156,7 @@
struct rcu_head rcu;
struct net_device *dev;
u8 primary_key[0];
-};
+} __randomize_layout;
struct neigh_ops {
int family;
diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h
index 31a2b51..1c401bd 100644
--- a/include/net/net_namespace.h
+++ b/include/net/net_namespace.h
@@ -148,7 +148,7 @@
#endif
struct sock *diag_nlsk;
atomic_t fnhe_genid;
-};
+} __randomize_layout;
#include <linux/seq_file_net.h>
diff --git a/include/net/netlink.h b/include/net/netlink.h
index 0170917..ef8e6c3 100644
--- a/include/net/netlink.h
+++ b/include/net/netlink.h
@@ -98,8 +98,8 @@
* nla_put_u8(skb, type, value) add u8 attribute to skb
* nla_put_u16(skb, type, value) add u16 attribute to skb
* nla_put_u32(skb, type, value) add u32 attribute to skb
- * nla_put_u64_64bits(skb, type,
- * value, padattr) add u64 attribute to skb
+ * nla_put_u64_64bit(skb, type,
+ * value, padattr) add u64 attribute to skb
* nla_put_s8(skb, type, value) add s8 attribute to skb
* nla_put_s16(skb, type, value) add s16 attribute to skb
* nla_put_s32(skb, type, value) add s32 attribute to skb
diff --git a/include/net/sctp/sctp.h b/include/net/sctp/sctp.h
index a9519a0..45fd4c6 100644
--- a/include/net/sctp/sctp.h
+++ b/include/net/sctp/sctp.h
@@ -469,6 +469,8 @@
#define _sctp_walk_params(pos, chunk, end, member)\
for (pos.v = chunk->member;\
+ (pos.v + offsetof(struct sctp_paramhdr, length) + sizeof(pos.p->length) <=\
+ (void *)chunk + end) &&\
pos.v <= (void *)chunk + end - ntohs(pos.p->length) &&\
ntohs(pos.p->length) >= sizeof(struct sctp_paramhdr);\
pos.v += SCTP_PAD4(ntohs(pos.p->length)))
@@ -479,6 +481,8 @@
#define _sctp_walk_errors(err, chunk_hdr, end)\
for (err = (sctp_errhdr_t *)((void *)chunk_hdr + \
sizeof(struct sctp_chunkhdr));\
+ ((void *)err + offsetof(sctp_errhdr_t, length) + sizeof(err->length) <=\
+ (void *)chunk_hdr + end) &&\
(void *)err <= (void *)chunk_hdr + end - ntohs(err->length) &&\
ntohs(err->length) >= sizeof(sctp_errhdr_t); \
err = (sctp_errhdr_t *)((void *)err + SCTP_PAD4(ntohs(err->length))))
diff --git a/include/net/sock.h b/include/net/sock.h
index 8c85791f..7c0632c 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -246,6 +246,7 @@
* @sk_policy: flow policy
* @sk_receive_queue: incoming packets
* @sk_wmem_alloc: transmit queue bytes committed
+ * @sk_tsq_flags: TCP Small Queues flags
* @sk_write_queue: Packet sending queue
* @sk_omem_alloc: "o" is "option" or "other"
* @sk_wmem_queued: persistent queue size
@@ -257,6 +258,7 @@
* @sk_pacing_status: Pacing status (requested, handled by sch_fq)
* @sk_max_pacing_rate: Maximum pacing rate (%SO_MAX_PACING_RATE)
* @sk_sndbuf: size of send buffer in bytes
+ * @__sk_flags_offset: empty field used to determine location of bitfield
* @sk_padding: unused element for alignment
* @sk_no_check_tx: %SO_NO_CHECK setting, set checksum in TX packets
* @sk_no_check_rx: allow zero checksum in RX packets
@@ -277,6 +279,7 @@
* @sk_drops: raw/udp drops counter
* @sk_ack_backlog: current listen backlog
* @sk_max_ack_backlog: listen backlog set in listen()
+ * @sk_uid: user id of owner
* @sk_priority: %SO_PRIORITY setting
* @sk_type: socket type (%SOCK_STREAM, etc)
* @sk_protocol: which protocol this socket belongs in this network family
@@ -1125,7 +1128,7 @@
atomic_t socks;
#endif
int (*diag_destroy)(struct sock *sk, int err);
-};
+} __randomize_layout;
int proto_register(struct proto *prot, int alloc_slab);
void proto_unregister(struct proto *prot);
diff --git a/include/net/udp.h b/include/net/udp.h
index 972ce4b..cc80369 100644
--- a/include/net/udp.h
+++ b/include/net/udp.h
@@ -260,6 +260,7 @@
}
void udp_v4_early_demux(struct sk_buff *skb);
+void udp_sk_rx_dst_set(struct sock *sk, struct dst_entry *dst);
int udp_get_port(struct sock *sk, unsigned short snum,
int (*saddr_cmp)(const struct sock *,
const struct sock *));
@@ -305,33 +306,44 @@
/* UDP uses skb->dev_scratch to cache as much information as possible and avoid
* possibly multiple cache miss on dequeue()
*/
-#if BITS_PER_LONG == 64
-
-/* truesize, len and the bit needed to compute skb_csum_unnecessary will be on
- * cold cache lines at recvmsg time.
- * skb->len can be stored on 16 bits since the udp header has been already
- * validated and pulled.
- */
struct udp_dev_scratch {
- u32 truesize;
+ /* skb->truesize and the stateless bit are embedded in a single field;
+ * do not use a bitfield since the compiler emits better/smaller code
+ * this way
+ */
+ u32 _tsize_state;
+
+#if BITS_PER_LONG == 64
+ /* len and the bit needed to compute skb_csum_unnecessary
+ * will be on cold cache lines at recvmsg time.
+ * skb->len can be stored on 16 bits since the udp header has been
+ * already validated and pulled.
+ */
u16 len;
bool is_linear;
bool csum_unnecessary;
+#endif
};
+static inline struct udp_dev_scratch *udp_skb_scratch(struct sk_buff *skb)
+{
+ return (struct udp_dev_scratch *)&skb->dev_scratch;
+}
+
+#if BITS_PER_LONG == 64
static inline unsigned int udp_skb_len(struct sk_buff *skb)
{
- return ((struct udp_dev_scratch *)&skb->dev_scratch)->len;
+ return udp_skb_scratch(skb)->len;
}
static inline bool udp_skb_csum_unnecessary(struct sk_buff *skb)
{
- return ((struct udp_dev_scratch *)&skb->dev_scratch)->csum_unnecessary;
+ return udp_skb_scratch(skb)->csum_unnecessary;
}
static inline bool udp_skb_is_linear(struct sk_buff *skb)
{
- return ((struct udp_dev_scratch *)&skb->dev_scratch)->is_linear;
+ return udp_skb_scratch(skb)->is_linear;
}
#else
diff --git a/include/rdma/ib_addr.h b/include/rdma/ib_addr.h
index 4b34c51..b73a14e 100644
--- a/include/rdma/ib_addr.h
+++ b/include/rdma/ib_addr.h
@@ -205,11 +205,13 @@
dev = dev_get_by_index(&init_net, dev_addr->bound_dev_if);
if (dev) {
ip4 = in_dev_get(dev);
- if (ip4 && ip4->ifa_list && ip4->ifa_list->ifa_address) {
+ if (ip4 && ip4->ifa_list && ip4->ifa_list->ifa_address)
ipv6_addr_set_v4mapped(ip4->ifa_list->ifa_address,
(struct in6_addr *)gid);
+
+ if (ip4)
in_dev_put(ip4);
- }
+
dev_put(dev);
}
}
diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h
index 356953d..b573243 100644
--- a/include/rdma/ib_verbs.h
+++ b/include/rdma/ib_verbs.h
@@ -1056,7 +1056,7 @@
IB_QP_CREATE_MANAGED_RECV = 1 << 4,
IB_QP_CREATE_NETIF_QP = 1 << 5,
IB_QP_CREATE_SIGNATURE_EN = 1 << 6,
- IB_QP_CREATE_USE_GFP_NOIO = 1 << 7,
+ /* FREE = 1 << 7, */
IB_QP_CREATE_SCATTER_FCS = 1 << 8,
IB_QP_CREATE_CVLAN_STRIPPING = 1 << 9,
/* reserve bits 26-31 for low level drivers' internal use */
@@ -2948,6 +2948,22 @@
struct ib_qp_init_attr *qp_init_attr);
/**
+ * ib_modify_qp_with_udata - Modifies the attributes for the specified QP.
+ * @qp: The QP to modify.
+ * @attr: On input, specifies the QP attributes to modify. On output,
+ * the current values of selected QP attributes are returned.
+ * @attr_mask: A bit-mask used to specify which attributes of the QP
+ * are being modified.
+ * @udata: pointer to user's input output buffer information
+ * are being modified.
+ * It returns 0 on success and returns appropriate error code on error.
+ */
+int ib_modify_qp_with_udata(struct ib_qp *qp,
+ struct ib_qp_attr *attr,
+ int attr_mask,
+ struct ib_udata *udata);
+
+/**
* ib_modify_qp - Modifies the attributes for the specified QP and then
* transitions the QP to the given state.
* @qp: The QP to modify.
diff --git a/include/rdma/rdma_vt.h b/include/rdma/rdma_vt.h
index 4878aaf..55af692 100644
--- a/include/rdma/rdma_vt.h
+++ b/include/rdma/rdma_vt.h
@@ -229,8 +229,7 @@
* ERR_PTR(err). The driver is free to return NULL or a valid
* pointer.
*/
- void * (*qp_priv_alloc)(struct rvt_dev_info *rdi, struct rvt_qp *qp,
- gfp_t gfp);
+ void * (*qp_priv_alloc)(struct rvt_dev_info *rdi, struct rvt_qp *qp);
/*
* Free the driver's private qp structure.
@@ -319,7 +318,7 @@
/* Let the driver pick the next queue pair number*/
int (*alloc_qpn)(struct rvt_dev_info *rdi, struct rvt_qpn_table *qpt,
- enum ib_qp_type type, u8 port_num, gfp_t gfp);
+ enum ib_qp_type type, u8 port_num);
/* Determine if its safe or allowed to modify the qp */
int (*check_modify_qp)(struct rvt_qp *qp, struct ib_qp_attr *attr,
diff --git a/include/rdma/rdmavt_qp.h b/include/rdma/rdmavt_qp.h
index be6472e5..d664d2e 100644
--- a/include/rdma/rdmavt_qp.h
+++ b/include/rdma/rdmavt_qp.h
@@ -647,6 +647,20 @@
return len >> qp->log_pmtu;
}
+/**
+ * rvt_timeout_to_jiffies - Convert a ULP timeout input into jiffies
+ * @timeout - timeout input(0 - 31).
+ *
+ * Return a timeout value in jiffies.
+ */
+static inline unsigned long rvt_timeout_to_jiffies(u8 timeout)
+{
+ if (timeout > 31)
+ timeout = 31;
+
+ return usecs_to_jiffies(1U << timeout) * 4096UL / 1000UL;
+}
+
extern const int ib_rvt_state_ops[];
struct rvt_dev_info;
diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h
index cfaeed2..6c0dc61 100644
--- a/include/scsi/libsas.h
+++ b/include/scsi/libsas.h
@@ -714,16 +714,13 @@
void sas_task_abort(struct sas_task *);
int sas_eh_abort_handler(struct scsi_cmnd *cmd);
int sas_eh_device_reset_handler(struct scsi_cmnd *cmd);
-int sas_eh_bus_reset_handler(struct scsi_cmnd *cmd);
+int sas_eh_target_reset_handler(struct scsi_cmnd *cmd);
extern void sas_target_destroy(struct scsi_target *);
extern int sas_slave_alloc(struct scsi_device *);
extern int sas_ioctl(struct scsi_device *sdev, int cmd, void __user *arg);
extern int sas_drain_work(struct sas_ha_struct *ha);
-extern int sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
- struct request *req);
-
extern void sas_ssp_task_response(struct device *dev, struct sas_task *task,
struct ssp_response_iu *iu);
struct sas_phy *sas_get_local_phy(struct domain_device *dev);
diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
index 6af198d..3d3f8b3 100644
--- a/include/scsi/scsi_cmnd.h
+++ b/include/scsi/scsi_cmnd.h
@@ -58,6 +58,9 @@
#define SCMD_TAGGED (1 << 0)
#define SCMD_UNCHECKED_ISA_DMA (1 << 1)
#define SCMD_ZONE_WRITE_LOCK (1 << 2)
+#define SCMD_INITIALIZED (1 << 3)
+/* flags preserved across unprep / reprep */
+#define SCMD_PRESERVED_FLAGS (SCMD_UNCHECKED_ISA_DMA | SCMD_INITIALIZED)
struct scsi_cmnd {
struct scsi_request req;
@@ -159,7 +162,6 @@
return *(struct scsi_driver **)cmd->request->rq_disk->private_data;
}
-extern struct scsi_cmnd *scsi_get_command(struct scsi_device *, gfp_t);
extern void scsi_put_command(struct scsi_cmnd *);
extern void scsi_finish_command(struct scsi_cmnd *cmd);
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 0979a5f..82e93ee 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -80,6 +80,18 @@
*/
};
+/**
+ * struct scsi_vpd - SCSI Vital Product Data
+ * @rcu: For kfree_rcu().
+ * @len: Length in bytes of @data.
+ * @data: VPD data as defined in various T10 SCSI standard documents.
+ */
+struct scsi_vpd {
+ struct rcu_head rcu;
+ int len;
+ unsigned char data[];
+};
+
struct scsi_device {
struct Scsi_Host *host;
struct request_queue *request_queue;
@@ -111,7 +123,7 @@
unsigned sector_size; /* size in bytes */
void *hostdata; /* available to low-level driver */
- char type;
+ unsigned char type;
char scsi_level;
char inq_periph_qual; /* PQ from INQUIRY data */
struct mutex inquiry_mutex;
@@ -122,10 +134,8 @@
const char * rev; /* ... "nullnullnullnull" before scan */
#define SCSI_VPD_PG_LEN 255
- int vpd_pg83_len;
- unsigned char __rcu *vpd_pg83;
- int vpd_pg80_len;
- unsigned char __rcu *vpd_pg80;
+ struct scsi_vpd __rcu *vpd_pg83;
+ struct scsi_vpd __rcu *vpd_pg80;
unsigned char current_tag; /* current tag */
struct scsi_target *sdev_target; /* used only for single_lun */
diff --git a/include/scsi/scsi_proto.h b/include/scsi/scsi_proto.h
index 8260700..8c285d9 100644
--- a/include/scsi/scsi_proto.h
+++ b/include/scsi/scsi_proto.h
@@ -158,6 +158,7 @@
#define READ_32 0x09
#define VERIFY_32 0x0a
#define WRITE_32 0x0b
+#define WRITE_VERIFY_32 0x0c
#define WRITE_SAME_32 0x0d
#define ATA_32 0x1ff0
diff --git a/include/scsi/scsi_tcq.h b/include/scsi/scsi_tcq.h
index 4416b10..5b416de 100644
--- a/include/scsi/scsi_tcq.h
+++ b/include/scsi/scsi_tcq.h
@@ -39,7 +39,7 @@
if (!req)
return NULL;
- return req->special;
+ return blk_mq_rq_to_pdu(req);
}
#endif /* CONFIG_BLOCK */
diff --git a/include/scsi/scsi_transport_fc.h b/include/scsi/scsi_transport_fc.h
index e308cd5..e8644ee 100644
--- a/include/scsi/scsi_transport_fc.h
+++ b/include/scsi/scsi_transport_fc.h
@@ -804,6 +804,7 @@
struct fc_vport *fc_vport_create(struct Scsi_Host *shost, int channel,
struct fc_vport_identifiers *);
int fc_vport_terminate(struct fc_vport *vport);
+int fc_block_rport(struct fc_rport *rport);
int fc_block_scsi_eh(struct scsi_cmnd *cmnd);
enum blk_eh_timer_return fc_eh_timed_out(struct scsi_cmnd *scmd);
diff --git a/include/scsi/scsi_transport_sas.h b/include/scsi/scsi_transport_sas.h
index 73d8709..a23304b 100644
--- a/include/scsi/scsi_transport_sas.h
+++ b/include/scsi/scsi_transport_sas.h
@@ -5,6 +5,7 @@
#include <linux/types.h>
#include <linux/mutex.h>
#include <scsi/sas.h>
+#include <linux/bsg-lib.h>
struct scsi_transport_template;
struct sas_rphy;
@@ -176,7 +177,8 @@
int (*phy_setup)(struct sas_phy *);
void (*phy_release)(struct sas_phy *);
int (*set_phy_speed)(struct sas_phy *, struct sas_phy_linkrates *);
- int (*smp_handler)(struct Scsi_Host *, struct sas_rphy *, struct request *);
+ void (*smp_handler)(struct bsg_job *, struct Scsi_Host *,
+ struct sas_rphy *);
};
diff --git a/include/scsi/scsi_transport_srp.h b/include/scsi/scsi_transport_srp.h
index dd09633..56ae198 100644
--- a/include/scsi/scsi_transport_srp.h
+++ b/include/scsi/scsi_transport_srp.h
@@ -111,7 +111,7 @@
struct srp_rport_identifiers *);
extern void srp_rport_del(struct srp_rport *);
extern int srp_tmo_valid(int reconnect_delay, int fast_io_fail_tmo,
- int dev_loss_tmo);
+ long dev_loss_tmo);
int srp_parse_tmo(int *tmo, const char *buf);
extern int srp_reconnect_rport(struct srp_rport *rport);
extern void srp_start_tl_fail_timers(struct srp_rport *rport);
diff --git a/include/sound/soc.h b/include/sound/soc.h
index 9c94b97..c4a8b19 100644
--- a/include/sound/soc.h
+++ b/include/sound/soc.h
@@ -795,10 +795,6 @@
int (*suspend)(struct snd_soc_component *);
int (*resume)(struct snd_soc_component *);
- /* pcm creation and destruction */
- int (*pcm_new)(struct snd_soc_pcm_runtime *);
- void (*pcm_free)(struct snd_pcm *);
-
/* DT */
int (*of_xlate_dai_name)(struct snd_soc_component *component,
struct of_phandle_args *args,
@@ -874,8 +870,6 @@
void (*remove)(struct snd_soc_component *);
int (*suspend)(struct snd_soc_component *);
int (*resume)(struct snd_soc_component *);
- int (*pcm_new)(struct snd_soc_pcm_runtime *);
- void (*pcm_free)(struct snd_pcm *);
/* machine specific init */
int (*init)(struct snd_soc_component *component);
diff --git a/include/target/iscsi/iscsi_target_core.h b/include/target/iscsi/iscsi_target_core.h
index 5f17fb7..0ca1fb0 100644
--- a/include/target/iscsi/iscsi_target_core.h
+++ b/include/target/iscsi/iscsi_target_core.h
@@ -66,6 +66,14 @@
#define TA_DEFAULT_FABRIC_PROT_TYPE 0
/* TPG status needs to be enabled to return sendtargets discovery endpoint info */
#define TA_DEFAULT_TPG_ENABLED_SENDTARGETS 1
+/*
+ * Used to control the sending of keys with optional to respond state bit,
+ * as a workaround for non RFC compliant initiators,that do not propose,
+ * nor respond to specific keys required for login to complete.
+ *
+ * See iscsi_check_proposer_for_optional_reply() for more details.
+ */
+#define TA_DEFAULT_LOGIN_KEYS_WORKAROUND 1
#define ISCSI_IOV_DATA_BUFFER 5
@@ -560,7 +568,6 @@
#define LOGIN_FLAGS_INITIAL_PDU 8
unsigned long login_flags;
struct delayed_work login_work;
- struct delayed_work login_cleanup_work;
struct iscsi_login *login;
struct timer_list nopin_timer;
struct timer_list nopin_response_timer;
@@ -769,6 +776,7 @@
u8 t10_pi;
u32 fabric_prot_type;
u32 tpg_enabled_sendtargets;
+ u32 login_keys_workaround;
struct iscsi_portal_group *tpg;
};
diff --git a/include/target/target_core_backend.h b/include/target/target_core_backend.h
index e475531..e150e39 100644
--- a/include/target/target_core_backend.h
+++ b/include/target/target_core_backend.h
@@ -2,6 +2,7 @@
#define TARGET_CORE_BACKEND_H
#include <linux/types.h>
+#include <asm/unaligned.h>
#include <target/target_core_base.h>
#define TRANSPORT_FLAG_PASSTHROUGH 0x1
@@ -29,16 +30,13 @@
struct se_device *(*alloc_device)(struct se_hba *, const char *);
int (*configure_device)(struct se_device *);
+ void (*destroy_device)(struct se_device *);
void (*free_device)(struct se_device *device);
ssize_t (*set_configfs_dev_params)(struct se_device *,
const char *, ssize_t);
ssize_t (*show_configfs_dev_params)(struct se_device *, char *);
- void (*transport_complete)(struct se_cmd *cmd,
- struct scatterlist *,
- unsigned char *);
-
sense_reason_t (*parse_cdb)(struct se_cmd *cmd);
u32 (*get_device_type)(struct se_device *);
sector_t (*get_blocks)(struct se_device *);
@@ -71,6 +69,8 @@
void target_complete_cmd(struct se_cmd *, u8);
void target_complete_cmd_with_length(struct se_cmd *, u8, int);
+void transport_copy_sense_to_cmd(struct se_cmd *, unsigned char *);
+
sense_reason_t spc_parse_cdb(struct se_cmd *cmd, unsigned int *size);
sense_reason_t spc_emulate_report_luns(struct se_cmd *cmd);
sense_reason_t spc_emulate_inquiry_std(struct se_cmd *, unsigned char *);
@@ -104,9 +104,18 @@
sense_reason_t passthrough_parse_cdb(struct se_cmd *cmd,
sense_reason_t (*exec_cmd)(struct se_cmd *cmd));
+struct se_device *target_find_device(int id, bool do_depend);
+
bool target_sense_desc_format(struct se_device *dev);
sector_t target_to_linux_sector(struct se_device *dev, sector_t lb);
bool target_configure_unmap_from_queue(struct se_dev_attrib *attrib,
struct request_queue *q);
+
+/* Only use get_unaligned_be24() if reading p - 1 is allowed. */
+static inline uint32_t get_unaligned_be24(const uint8_t *const p)
+{
+ return get_unaligned_be32(p - 1) & 0xffffffU;
+}
+
#endif /* TARGET_CORE_BACKEND_H */
diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h
index 0c1dce2..516764f 100644
--- a/include/target/target_core_base.h
+++ b/include/target/target_core_base.h
@@ -188,7 +188,8 @@
TARGET_SCF_BIDI_OP = 0x01,
TARGET_SCF_ACK_KREF = 0x02,
TARGET_SCF_UNKNOWN_SIZE = 0x04,
- TARGET_SCF_USE_CPUID = 0x08,
+ TARGET_SCF_USE_CPUID = 0x08,
+ TARGET_SCF_LOOKUP_LUN_FROM_TAG = 0x10,
};
/* fabric independent task management function values */
@@ -218,7 +219,6 @@
*/
typedef enum {
SCSI_INST_INDEX,
- SCSI_DEVICE_INDEX,
SCSI_AUTH_INTR_INDEX,
SCSI_INDEX_TYPE_MAX
} scsi_index_t;
@@ -701,8 +701,6 @@
struct se_lun {
u64 unpacked_lun;
-#define SE_LUN_LINK_MAGIC 0xffff7771
- u32 lun_link_magic;
bool lun_shutdown;
bool lun_access_ro;
u32 lun_index;
@@ -746,8 +744,6 @@
};
struct se_device {
-#define SE_DEV_LINK_MAGIC 0xfeeddeef
- u32 dev_link_magic;
/* RELATIVE TARGET PORT IDENTIFER Counter */
u16 dev_rpti_counter;
/* Used for SAM Task Attribute ordering */
@@ -800,7 +796,6 @@
struct list_head delayed_cmd_list;
struct list_head state_list;
struct list_head qf_cmd_list;
- struct list_head g_dev_node;
/* Pointer to associated SE HBA */
struct se_hba *se_hba;
/* T10 Inquiry and VPD WWN Information */
@@ -819,8 +814,6 @@
unsigned char udev_path[SE_UDEV_PATH_LEN];
/* Pointer to template of function pointers for transport */
const struct target_backend_ops *transport;
- /* Linked list for struct se_hba struct se_device list */
- struct list_head dev_list;
struct se_lun xcopy_lun;
/* Protection Information */
int prot_length;
diff --git a/include/target/target_core_fabric.h b/include/target/target_core_fabric.h
index d7dd142..33d2e3e 100644
--- a/include/target/target_core_fabric.h
+++ b/include/target/target_core_fabric.h
@@ -160,6 +160,7 @@
int target_put_sess_cmd(struct se_cmd *);
void target_sess_cmd_list_set_waiting(struct se_session *);
void target_wait_for_sess_cmds(struct se_session *);
+void target_show_cmd(const char *pfx, struct se_cmd *cmd);
int core_alua_check_nonop_delay(struct se_cmd *);
diff --git a/include/trace/events/ext4.h b/include/trace/events/ext4.h
index dfae175..9c3bc38 100644
--- a/include/trace/events/ext4.h
+++ b/include/trace/events/ext4.h
@@ -937,21 +937,19 @@
TP_STRUCT__entry(
__field( dev_t, dev )
__field( ino_t, ino )
- __field( unsigned int, data_blocks )
- __field( unsigned int, meta_blocks )
+ __field( unsigned int, data_blocks )
),
TP_fast_assign(
__entry->dev = inode->i_sb->s_dev;
__entry->ino = inode->i_ino;
__entry->data_blocks = EXT4_I(inode)->i_reserved_data_blocks;
- __entry->meta_blocks = EXT4_I(inode)->i_reserved_meta_blocks;
),
- TP_printk("dev %d,%d ino %lu data_blocks %u meta_blocks %u",
+ TP_printk("dev %d,%d ino %lu reserved_data_blocks %u",
MAJOR(__entry->dev), MINOR(__entry->dev),
(unsigned long) __entry->ino,
- __entry->data_blocks, __entry->meta_blocks)
+ __entry->data_blocks)
);
TRACE_EVENT(ext4_mballoc_alloc,
@@ -1153,8 +1151,6 @@
__field( __u64, i_blocks )
__field( int, used_blocks )
__field( int, reserved_data_blocks )
- __field( int, reserved_meta_blocks )
- __field( int, allocated_meta_blocks )
__field( int, quota_claim )
__field( __u16, mode )
),
@@ -1166,22 +1162,16 @@
__entry->used_blocks = used_blocks;
__entry->reserved_data_blocks =
EXT4_I(inode)->i_reserved_data_blocks;
- __entry->reserved_meta_blocks =
- EXT4_I(inode)->i_reserved_meta_blocks;
- __entry->allocated_meta_blocks =
- EXT4_I(inode)->i_allocated_meta_blocks;
__entry->quota_claim = quota_claim;
__entry->mode = inode->i_mode;
),
TP_printk("dev %d,%d ino %lu mode 0%o i_blocks %llu used_blocks %d "
- "reserved_data_blocks %d reserved_meta_blocks %d "
- "allocated_meta_blocks %d quota_claim %d",
+ "reserved_data_blocks %d quota_claim %d",
MAJOR(__entry->dev), MINOR(__entry->dev),
(unsigned long) __entry->ino,
__entry->mode, __entry->i_blocks,
__entry->used_blocks, __entry->reserved_data_blocks,
- __entry->reserved_meta_blocks, __entry->allocated_meta_blocks,
__entry->quota_claim)
);
@@ -1195,7 +1185,6 @@
__field( ino_t, ino )
__field( __u64, i_blocks )
__field( int, reserved_data_blocks )
- __field( int, reserved_meta_blocks )
__field( __u16, mode )
),
@@ -1204,17 +1193,15 @@
__entry->ino = inode->i_ino;
__entry->i_blocks = inode->i_blocks;
__entry->reserved_data_blocks = EXT4_I(inode)->i_reserved_data_blocks;
- __entry->reserved_meta_blocks = EXT4_I(inode)->i_reserved_meta_blocks;
__entry->mode = inode->i_mode;
),
TP_printk("dev %d,%d ino %lu mode 0%o i_blocks %llu "
- "reserved_data_blocks %d reserved_meta_blocks %d",
+ "reserved_data_blocks %d",
MAJOR(__entry->dev), MINOR(__entry->dev),
(unsigned long) __entry->ino,
__entry->mode, __entry->i_blocks,
- __entry->reserved_data_blocks,
- __entry->reserved_meta_blocks)
+ __entry->reserved_data_blocks)
);
TRACE_EVENT(ext4_da_release_space,
@@ -1228,8 +1215,6 @@
__field( __u64, i_blocks )
__field( int, freed_blocks )
__field( int, reserved_data_blocks )
- __field( int, reserved_meta_blocks )
- __field( int, allocated_meta_blocks )
__field( __u16, mode )
),
@@ -1239,19 +1224,15 @@
__entry->i_blocks = inode->i_blocks;
__entry->freed_blocks = freed_blocks;
__entry->reserved_data_blocks = EXT4_I(inode)->i_reserved_data_blocks;
- __entry->reserved_meta_blocks = EXT4_I(inode)->i_reserved_meta_blocks;
- __entry->allocated_meta_blocks = EXT4_I(inode)->i_allocated_meta_blocks;
__entry->mode = inode->i_mode;
),
TP_printk("dev %d,%d ino %lu mode 0%o i_blocks %llu freed_blocks %d "
- "reserved_data_blocks %d reserved_meta_blocks %d "
- "allocated_meta_blocks %d",
+ "reserved_data_blocks %d",
MAJOR(__entry->dev), MINOR(__entry->dev),
(unsigned long) __entry->ino,
__entry->mode, __entry->i_blocks,
- __entry->freed_blocks, __entry->reserved_data_blocks,
- __entry->reserved_meta_blocks, __entry->allocated_meta_blocks)
+ __entry->freed_blocks, __entry->reserved_data_blocks)
);
DECLARE_EVENT_CLASS(ext4__bitmap_load,
diff --git a/include/trace/events/i2c.h b/include/trace/events/i2c.h
index 4abb8ea..86a4011 100644
--- a/include/trace/events/i2c.h
+++ b/include/trace/events/i2c.h
@@ -1,4 +1,4 @@
-/* I2C and SMBUS message transfer tracepoints
+/* I2C message transfer tracepoints
*
* Copyright (C) 2013 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
@@ -18,7 +18,7 @@
#include <linux/tracepoint.h>
/*
- * drivers/i2c/i2c-core.c
+ * drivers/i2c/i2c-core-base.c
*/
extern int i2c_transfer_trace_reg(void);
extern void i2c_transfer_trace_unreg(void);
@@ -144,228 +144,6 @@
i2c_transfer_trace_reg,
i2c_transfer_trace_unreg);
-/*
- * i2c_smbus_xfer() write data or procedure call request
- */
-TRACE_EVENT_CONDITION(smbus_write,
- TP_PROTO(const struct i2c_adapter *adap,
- u16 addr, unsigned short flags,
- char read_write, u8 command, int protocol,
- const union i2c_smbus_data *data),
- TP_ARGS(adap, addr, flags, read_write, command, protocol, data),
- TP_CONDITION(read_write == I2C_SMBUS_WRITE ||
- protocol == I2C_SMBUS_PROC_CALL ||
- protocol == I2C_SMBUS_BLOCK_PROC_CALL),
- TP_STRUCT__entry(
- __field(int, adapter_nr )
- __field(__u16, addr )
- __field(__u16, flags )
- __field(__u8, command )
- __field(__u8, len )
- __field(__u32, protocol )
- __array(__u8, buf, I2C_SMBUS_BLOCK_MAX + 2) ),
- TP_fast_assign(
- __entry->adapter_nr = adap->nr;
- __entry->addr = addr;
- __entry->flags = flags;
- __entry->command = command;
- __entry->protocol = protocol;
-
- switch (protocol) {
- case I2C_SMBUS_BYTE_DATA:
- __entry->len = 1;
- goto copy;
- case I2C_SMBUS_WORD_DATA:
- case I2C_SMBUS_PROC_CALL:
- __entry->len = 2;
- goto copy;
- case I2C_SMBUS_BLOCK_DATA:
- case I2C_SMBUS_BLOCK_PROC_CALL:
- case I2C_SMBUS_I2C_BLOCK_DATA:
- __entry->len = data->block[0] + 1;
- copy:
- memcpy(__entry->buf, data->block, __entry->len);
- break;
- case I2C_SMBUS_QUICK:
- case I2C_SMBUS_BYTE:
- case I2C_SMBUS_I2C_BLOCK_BROKEN:
- default:
- __entry->len = 0;
- }
- ),
- TP_printk("i2c-%d a=%03x f=%04x c=%x %s l=%u [%*phD]",
- __entry->adapter_nr,
- __entry->addr,
- __entry->flags,
- __entry->command,
- __print_symbolic(__entry->protocol,
- { I2C_SMBUS_QUICK, "QUICK" },
- { I2C_SMBUS_BYTE, "BYTE" },
- { I2C_SMBUS_BYTE_DATA, "BYTE_DATA" },
- { I2C_SMBUS_WORD_DATA, "WORD_DATA" },
- { I2C_SMBUS_PROC_CALL, "PROC_CALL" },
- { I2C_SMBUS_BLOCK_DATA, "BLOCK_DATA" },
- { I2C_SMBUS_I2C_BLOCK_BROKEN, "I2C_BLOCK_BROKEN" },
- { I2C_SMBUS_BLOCK_PROC_CALL, "BLOCK_PROC_CALL" },
- { I2C_SMBUS_I2C_BLOCK_DATA, "I2C_BLOCK_DATA" }),
- __entry->len,
- __entry->len, __entry->buf
- ));
-
-/*
- * i2c_smbus_xfer() read data request
- */
-TRACE_EVENT_CONDITION(smbus_read,
- TP_PROTO(const struct i2c_adapter *adap,
- u16 addr, unsigned short flags,
- char read_write, u8 command, int protocol),
- TP_ARGS(adap, addr, flags, read_write, command, protocol),
- TP_CONDITION(!(read_write == I2C_SMBUS_WRITE ||
- protocol == I2C_SMBUS_PROC_CALL ||
- protocol == I2C_SMBUS_BLOCK_PROC_CALL)),
- TP_STRUCT__entry(
- __field(int, adapter_nr )
- __field(__u16, flags )
- __field(__u16, addr )
- __field(__u8, command )
- __field(__u32, protocol )
- __array(__u8, buf, I2C_SMBUS_BLOCK_MAX + 2) ),
- TP_fast_assign(
- __entry->adapter_nr = adap->nr;
- __entry->addr = addr;
- __entry->flags = flags;
- __entry->command = command;
- __entry->protocol = protocol;
- ),
- TP_printk("i2c-%d a=%03x f=%04x c=%x %s",
- __entry->adapter_nr,
- __entry->addr,
- __entry->flags,
- __entry->command,
- __print_symbolic(__entry->protocol,
- { I2C_SMBUS_QUICK, "QUICK" },
- { I2C_SMBUS_BYTE, "BYTE" },
- { I2C_SMBUS_BYTE_DATA, "BYTE_DATA" },
- { I2C_SMBUS_WORD_DATA, "WORD_DATA" },
- { I2C_SMBUS_PROC_CALL, "PROC_CALL" },
- { I2C_SMBUS_BLOCK_DATA, "BLOCK_DATA" },
- { I2C_SMBUS_I2C_BLOCK_BROKEN, "I2C_BLOCK_BROKEN" },
- { I2C_SMBUS_BLOCK_PROC_CALL, "BLOCK_PROC_CALL" },
- { I2C_SMBUS_I2C_BLOCK_DATA, "I2C_BLOCK_DATA" })
- ));
-
-/*
- * i2c_smbus_xfer() read data or procedure call reply
- */
-TRACE_EVENT_CONDITION(smbus_reply,
- TP_PROTO(const struct i2c_adapter *adap,
- u16 addr, unsigned short flags,
- char read_write, u8 command, int protocol,
- const union i2c_smbus_data *data),
- TP_ARGS(adap, addr, flags, read_write, command, protocol, data),
- TP_CONDITION(read_write == I2C_SMBUS_READ),
- TP_STRUCT__entry(
- __field(int, adapter_nr )
- __field(__u16, addr )
- __field(__u16, flags )
- __field(__u8, command )
- __field(__u8, len )
- __field(__u32, protocol )
- __array(__u8, buf, I2C_SMBUS_BLOCK_MAX + 2) ),
- TP_fast_assign(
- __entry->adapter_nr = adap->nr;
- __entry->addr = addr;
- __entry->flags = flags;
- __entry->command = command;
- __entry->protocol = protocol;
-
- switch (protocol) {
- case I2C_SMBUS_BYTE:
- case I2C_SMBUS_BYTE_DATA:
- __entry->len = 1;
- goto copy;
- case I2C_SMBUS_WORD_DATA:
- case I2C_SMBUS_PROC_CALL:
- __entry->len = 2;
- goto copy;
- case I2C_SMBUS_BLOCK_DATA:
- case I2C_SMBUS_BLOCK_PROC_CALL:
- case I2C_SMBUS_I2C_BLOCK_DATA:
- __entry->len = data->block[0] + 1;
- copy:
- memcpy(__entry->buf, data->block, __entry->len);
- break;
- case I2C_SMBUS_QUICK:
- case I2C_SMBUS_I2C_BLOCK_BROKEN:
- default:
- __entry->len = 0;
- }
- ),
- TP_printk("i2c-%d a=%03x f=%04x c=%x %s l=%u [%*phD]",
- __entry->adapter_nr,
- __entry->addr,
- __entry->flags,
- __entry->command,
- __print_symbolic(__entry->protocol,
- { I2C_SMBUS_QUICK, "QUICK" },
- { I2C_SMBUS_BYTE, "BYTE" },
- { I2C_SMBUS_BYTE_DATA, "BYTE_DATA" },
- { I2C_SMBUS_WORD_DATA, "WORD_DATA" },
- { I2C_SMBUS_PROC_CALL, "PROC_CALL" },
- { I2C_SMBUS_BLOCK_DATA, "BLOCK_DATA" },
- { I2C_SMBUS_I2C_BLOCK_BROKEN, "I2C_BLOCK_BROKEN" },
- { I2C_SMBUS_BLOCK_PROC_CALL, "BLOCK_PROC_CALL" },
- { I2C_SMBUS_I2C_BLOCK_DATA, "I2C_BLOCK_DATA" }),
- __entry->len,
- __entry->len, __entry->buf
- ));
-
-/*
- * i2c_smbus_xfer() result
- */
-TRACE_EVENT(smbus_result,
- TP_PROTO(const struct i2c_adapter *adap,
- u16 addr, unsigned short flags,
- char read_write, u8 command, int protocol,
- int res),
- TP_ARGS(adap, addr, flags, read_write, command, protocol, res),
- TP_STRUCT__entry(
- __field(int, adapter_nr )
- __field(__u16, addr )
- __field(__u16, flags )
- __field(__u8, read_write )
- __field(__u8, command )
- __field(__s16, res )
- __field(__u32, protocol )
- ),
- TP_fast_assign(
- __entry->adapter_nr = adap->nr;
- __entry->addr = addr;
- __entry->flags = flags;
- __entry->read_write = read_write;
- __entry->command = command;
- __entry->protocol = protocol;
- __entry->res = res;
- ),
- TP_printk("i2c-%d a=%03x f=%04x c=%x %s %s res=%d",
- __entry->adapter_nr,
- __entry->addr,
- __entry->flags,
- __entry->command,
- __print_symbolic(__entry->protocol,
- { I2C_SMBUS_QUICK, "QUICK" },
- { I2C_SMBUS_BYTE, "BYTE" },
- { I2C_SMBUS_BYTE_DATA, "BYTE_DATA" },
- { I2C_SMBUS_WORD_DATA, "WORD_DATA" },
- { I2C_SMBUS_PROC_CALL, "PROC_CALL" },
- { I2C_SMBUS_BLOCK_DATA, "BLOCK_DATA" },
- { I2C_SMBUS_I2C_BLOCK_BROKEN, "I2C_BLOCK_BROKEN" },
- { I2C_SMBUS_BLOCK_PROC_CALL, "BLOCK_PROC_CALL" },
- { I2C_SMBUS_I2C_BLOCK_DATA, "I2C_BLOCK_DATA" }),
- __entry->read_write == I2C_SMBUS_WRITE ? "wr" : "rd",
- __entry->res
- ));
-
#endif /* _TRACE_I2C_H */
/* This part must be outside protection */
diff --git a/include/trace/events/mmflags.h b/include/trace/events/mmflags.h
index 10e3663..8e50d01 100644
--- a/include/trace/events/mmflags.h
+++ b/include/trace/events/mmflags.h
@@ -34,7 +34,7 @@
{(unsigned long)__GFP_FS, "__GFP_FS"}, \
{(unsigned long)__GFP_COLD, "__GFP_COLD"}, \
{(unsigned long)__GFP_NOWARN, "__GFP_NOWARN"}, \
- {(unsigned long)__GFP_REPEAT, "__GFP_REPEAT"}, \
+ {(unsigned long)__GFP_RETRY_MAYFAIL, "__GFP_RETRY_MAYFAIL"}, \
{(unsigned long)__GFP_NOFAIL, "__GFP_NOFAIL"}, \
{(unsigned long)__GFP_NORETRY, "__GFP_NORETRY"}, \
{(unsigned long)__GFP_COMP, "__GFP_COMP"}, \
diff --git a/include/trace/events/smbus.h b/include/trace/events/smbus.h
new file mode 100644
index 0000000..d2fb6e1
--- /dev/null
+++ b/include/trace/events/smbus.h
@@ -0,0 +1,249 @@
+/* SMBUS message transfer tracepoints
+ *
+ * Copyright (C) 2013 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM smbus
+
+#if !defined(_TRACE_SMBUS_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_SMBUS_H
+
+#include <linux/i2c.h>
+#include <linux/tracepoint.h>
+
+/*
+ * drivers/i2c/i2c-core-smbus.c
+ */
+
+/*
+ * i2c_smbus_xfer() write data or procedure call request
+ */
+TRACE_EVENT_CONDITION(smbus_write,
+ TP_PROTO(const struct i2c_adapter *adap,
+ u16 addr, unsigned short flags,
+ char read_write, u8 command, int protocol,
+ const union i2c_smbus_data *data),
+ TP_ARGS(adap, addr, flags, read_write, command, protocol, data),
+ TP_CONDITION(read_write == I2C_SMBUS_WRITE ||
+ protocol == I2C_SMBUS_PROC_CALL ||
+ protocol == I2C_SMBUS_BLOCK_PROC_CALL),
+ TP_STRUCT__entry(
+ __field(int, adapter_nr )
+ __field(__u16, addr )
+ __field(__u16, flags )
+ __field(__u8, command )
+ __field(__u8, len )
+ __field(__u32, protocol )
+ __array(__u8, buf, I2C_SMBUS_BLOCK_MAX + 2) ),
+ TP_fast_assign(
+ __entry->adapter_nr = adap->nr;
+ __entry->addr = addr;
+ __entry->flags = flags;
+ __entry->command = command;
+ __entry->protocol = protocol;
+
+ switch (protocol) {
+ case I2C_SMBUS_BYTE_DATA:
+ __entry->len = 1;
+ goto copy;
+ case I2C_SMBUS_WORD_DATA:
+ case I2C_SMBUS_PROC_CALL:
+ __entry->len = 2;
+ goto copy;
+ case I2C_SMBUS_BLOCK_DATA:
+ case I2C_SMBUS_BLOCK_PROC_CALL:
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ __entry->len = data->block[0] + 1;
+ copy:
+ memcpy(__entry->buf, data->block, __entry->len);
+ break;
+ case I2C_SMBUS_QUICK:
+ case I2C_SMBUS_BYTE:
+ case I2C_SMBUS_I2C_BLOCK_BROKEN:
+ default:
+ __entry->len = 0;
+ }
+ ),
+ TP_printk("i2c-%d a=%03x f=%04x c=%x %s l=%u [%*phD]",
+ __entry->adapter_nr,
+ __entry->addr,
+ __entry->flags,
+ __entry->command,
+ __print_symbolic(__entry->protocol,
+ { I2C_SMBUS_QUICK, "QUICK" },
+ { I2C_SMBUS_BYTE, "BYTE" },
+ { I2C_SMBUS_BYTE_DATA, "BYTE_DATA" },
+ { I2C_SMBUS_WORD_DATA, "WORD_DATA" },
+ { I2C_SMBUS_PROC_CALL, "PROC_CALL" },
+ { I2C_SMBUS_BLOCK_DATA, "BLOCK_DATA" },
+ { I2C_SMBUS_I2C_BLOCK_BROKEN, "I2C_BLOCK_BROKEN" },
+ { I2C_SMBUS_BLOCK_PROC_CALL, "BLOCK_PROC_CALL" },
+ { I2C_SMBUS_I2C_BLOCK_DATA, "I2C_BLOCK_DATA" }),
+ __entry->len,
+ __entry->len, __entry->buf
+ ));
+
+/*
+ * i2c_smbus_xfer() read data request
+ */
+TRACE_EVENT_CONDITION(smbus_read,
+ TP_PROTO(const struct i2c_adapter *adap,
+ u16 addr, unsigned short flags,
+ char read_write, u8 command, int protocol),
+ TP_ARGS(adap, addr, flags, read_write, command, protocol),
+ TP_CONDITION(!(read_write == I2C_SMBUS_WRITE ||
+ protocol == I2C_SMBUS_PROC_CALL ||
+ protocol == I2C_SMBUS_BLOCK_PROC_CALL)),
+ TP_STRUCT__entry(
+ __field(int, adapter_nr )
+ __field(__u16, flags )
+ __field(__u16, addr )
+ __field(__u8, command )
+ __field(__u32, protocol )
+ __array(__u8, buf, I2C_SMBUS_BLOCK_MAX + 2) ),
+ TP_fast_assign(
+ __entry->adapter_nr = adap->nr;
+ __entry->addr = addr;
+ __entry->flags = flags;
+ __entry->command = command;
+ __entry->protocol = protocol;
+ ),
+ TP_printk("i2c-%d a=%03x f=%04x c=%x %s",
+ __entry->adapter_nr,
+ __entry->addr,
+ __entry->flags,
+ __entry->command,
+ __print_symbolic(__entry->protocol,
+ { I2C_SMBUS_QUICK, "QUICK" },
+ { I2C_SMBUS_BYTE, "BYTE" },
+ { I2C_SMBUS_BYTE_DATA, "BYTE_DATA" },
+ { I2C_SMBUS_WORD_DATA, "WORD_DATA" },
+ { I2C_SMBUS_PROC_CALL, "PROC_CALL" },
+ { I2C_SMBUS_BLOCK_DATA, "BLOCK_DATA" },
+ { I2C_SMBUS_I2C_BLOCK_BROKEN, "I2C_BLOCK_BROKEN" },
+ { I2C_SMBUS_BLOCK_PROC_CALL, "BLOCK_PROC_CALL" },
+ { I2C_SMBUS_I2C_BLOCK_DATA, "I2C_BLOCK_DATA" })
+ ));
+
+/*
+ * i2c_smbus_xfer() read data or procedure call reply
+ */
+TRACE_EVENT_CONDITION(smbus_reply,
+ TP_PROTO(const struct i2c_adapter *adap,
+ u16 addr, unsigned short flags,
+ char read_write, u8 command, int protocol,
+ const union i2c_smbus_data *data),
+ TP_ARGS(adap, addr, flags, read_write, command, protocol, data),
+ TP_CONDITION(read_write == I2C_SMBUS_READ),
+ TP_STRUCT__entry(
+ __field(int, adapter_nr )
+ __field(__u16, addr )
+ __field(__u16, flags )
+ __field(__u8, command )
+ __field(__u8, len )
+ __field(__u32, protocol )
+ __array(__u8, buf, I2C_SMBUS_BLOCK_MAX + 2) ),
+ TP_fast_assign(
+ __entry->adapter_nr = adap->nr;
+ __entry->addr = addr;
+ __entry->flags = flags;
+ __entry->command = command;
+ __entry->protocol = protocol;
+
+ switch (protocol) {
+ case I2C_SMBUS_BYTE:
+ case I2C_SMBUS_BYTE_DATA:
+ __entry->len = 1;
+ goto copy;
+ case I2C_SMBUS_WORD_DATA:
+ case I2C_SMBUS_PROC_CALL:
+ __entry->len = 2;
+ goto copy;
+ case I2C_SMBUS_BLOCK_DATA:
+ case I2C_SMBUS_BLOCK_PROC_CALL:
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ __entry->len = data->block[0] + 1;
+ copy:
+ memcpy(__entry->buf, data->block, __entry->len);
+ break;
+ case I2C_SMBUS_QUICK:
+ case I2C_SMBUS_I2C_BLOCK_BROKEN:
+ default:
+ __entry->len = 0;
+ }
+ ),
+ TP_printk("i2c-%d a=%03x f=%04x c=%x %s l=%u [%*phD]",
+ __entry->adapter_nr,
+ __entry->addr,
+ __entry->flags,
+ __entry->command,
+ __print_symbolic(__entry->protocol,
+ { I2C_SMBUS_QUICK, "QUICK" },
+ { I2C_SMBUS_BYTE, "BYTE" },
+ { I2C_SMBUS_BYTE_DATA, "BYTE_DATA" },
+ { I2C_SMBUS_WORD_DATA, "WORD_DATA" },
+ { I2C_SMBUS_PROC_CALL, "PROC_CALL" },
+ { I2C_SMBUS_BLOCK_DATA, "BLOCK_DATA" },
+ { I2C_SMBUS_I2C_BLOCK_BROKEN, "I2C_BLOCK_BROKEN" },
+ { I2C_SMBUS_BLOCK_PROC_CALL, "BLOCK_PROC_CALL" },
+ { I2C_SMBUS_I2C_BLOCK_DATA, "I2C_BLOCK_DATA" }),
+ __entry->len,
+ __entry->len, __entry->buf
+ ));
+
+/*
+ * i2c_smbus_xfer() result
+ */
+TRACE_EVENT(smbus_result,
+ TP_PROTO(const struct i2c_adapter *adap,
+ u16 addr, unsigned short flags,
+ char read_write, u8 command, int protocol,
+ int res),
+ TP_ARGS(adap, addr, flags, read_write, command, protocol, res),
+ TP_STRUCT__entry(
+ __field(int, adapter_nr )
+ __field(__u16, addr )
+ __field(__u16, flags )
+ __field(__u8, read_write )
+ __field(__u8, command )
+ __field(__s16, res )
+ __field(__u32, protocol )
+ ),
+ TP_fast_assign(
+ __entry->adapter_nr = adap->nr;
+ __entry->addr = addr;
+ __entry->flags = flags;
+ __entry->read_write = read_write;
+ __entry->command = command;
+ __entry->protocol = protocol;
+ __entry->res = res;
+ ),
+ TP_printk("i2c-%d a=%03x f=%04x c=%x %s %s res=%d",
+ __entry->adapter_nr,
+ __entry->addr,
+ __entry->flags,
+ __entry->command,
+ __print_symbolic(__entry->protocol,
+ { I2C_SMBUS_QUICK, "QUICK" },
+ { I2C_SMBUS_BYTE, "BYTE" },
+ { I2C_SMBUS_BYTE_DATA, "BYTE_DATA" },
+ { I2C_SMBUS_WORD_DATA, "WORD_DATA" },
+ { I2C_SMBUS_PROC_CALL, "PROC_CALL" },
+ { I2C_SMBUS_BLOCK_DATA, "BLOCK_DATA" },
+ { I2C_SMBUS_I2C_BLOCK_BROKEN, "I2C_BLOCK_BROKEN" },
+ { I2C_SMBUS_BLOCK_PROC_CALL, "BLOCK_PROC_CALL" },
+ { I2C_SMBUS_I2C_BLOCK_DATA, "I2C_BLOCK_DATA" }),
+ __entry->read_write == I2C_SMBUS_WRITE ? "wr" : "rd",
+ __entry->res
+ ));
+
+#endif /* _TRACE_SMBUS_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/uapi/asm-generic/ioctls.h b/include/uapi/asm-generic/ioctls.h
index 06d5f7d..14baf9f2 100644
--- a/include/uapi/asm-generic/ioctls.h
+++ b/include/uapi/asm-generic/ioctls.h
@@ -77,7 +77,7 @@
#define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */
#define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */
#define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */
-#define TIOCGPTPEER _IOR('T', 0x41, int) /* Safely open the slave */
+#define TIOCGPTPEER _IO('T', 0x41) /* Safely open the slave */
#define FIONCLEX 0x5450
#define FIOCLEX 0x5451
diff --git a/include/uapi/linux/kcmp.h b/include/uapi/linux/kcmp.h
index 84df14b..481e103 100644
--- a/include/uapi/linux/kcmp.h
+++ b/include/uapi/linux/kcmp.h
@@ -1,6 +1,8 @@
#ifndef _UAPI_LINUX_KCMP_H
#define _UAPI_LINUX_KCMP_H
+#include <linux/types.h>
+
/* Comparison type */
enum kcmp_type {
KCMP_FILE,
@@ -10,8 +12,16 @@
KCMP_SIGHAND,
KCMP_IO,
KCMP_SYSVSEM,
+ KCMP_EPOLL_TFD,
KCMP_TYPES,
};
+/* Slot for KCMP_EPOLL_TFD */
+struct kcmp_epoll_slot {
+ __u32 efd; /* epoll file descriptor */
+ __u32 tfd; /* target file number */
+ __u32 toff; /* target offset within same numbered sequence */
+};
+
#endif /* _UAPI_LINUX_KCMP_H */
diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
index c0b6dfe..6cd63c1 100644
--- a/include/uapi/linux/kvm.h
+++ b/include/uapi/linux/kvm.h
@@ -927,6 +927,8 @@
#define KVM_CAP_S390_CMMA_MIGRATION 145
#define KVM_CAP_PPC_FWNMI 146
#define KVM_CAP_PPC_SMT_POSSIBLE 147
+#define KVM_CAP_HYPERV_SYNIC2 148
+#define KVM_CAP_HYPERV_VP_INDEX 149
#ifdef KVM_CAP_IRQ_ROUTING
@@ -1351,7 +1353,7 @@
/* Available with KVM_CAP_X86_SMM */
#define KVM_SMI _IO(KVMIO, 0xb7)
/* Available with KVM_CAP_S390_CMMA_MIGRATION */
-#define KVM_S390_GET_CMMA_BITS _IOW(KVMIO, 0xb8, struct kvm_s390_cmma_log)
+#define KVM_S390_GET_CMMA_BITS _IOWR(KVMIO, 0xb8, struct kvm_s390_cmma_log)
#define KVM_S390_SET_CMMA_BITS _IOW(KVMIO, 0xb9, struct kvm_s390_cmma_log)
#define KVM_DEV_ASSIGN_ENABLE_IOMMU (1 << 0)
diff --git a/include/uapi/linux/sem.h b/include/uapi/linux/sem.h
index dd73b90..67eb903 100644
--- a/include/uapi/linux/sem.h
+++ b/include/uapi/linux/sem.h
@@ -23,7 +23,7 @@
struct semid_ds {
struct ipc_perm sem_perm; /* permissions .. see ipc.h */
__kernel_time_t sem_otime; /* last semop time */
- __kernel_time_t sem_ctime; /* last change time */
+ __kernel_time_t sem_ctime; /* create/last semctl() time */
struct sem *sem_base; /* ptr to first semaphore in array */
struct sem_queue *sem_pending; /* pending operations to be processed */
struct sem_queue **sem_pending_last; /* last pending operation */
diff --git a/include/uapi/linux/target_core_user.h b/include/uapi/linux/target_core_user.h
index af17b41..24a1c4e 100644
--- a/include/uapi/linux/target_core_user.h
+++ b/include/uapi/linux/target_core_user.h
@@ -130,6 +130,11 @@
TCMU_CMD_UNSPEC,
TCMU_CMD_ADDED_DEVICE,
TCMU_CMD_REMOVED_DEVICE,
+ TCMU_CMD_RECONFIG_DEVICE,
+ TCMU_CMD_ADDED_DEVICE_DONE,
+ TCMU_CMD_REMOVED_DEVICE_DONE,
+ TCMU_CMD_RECONFIG_DEVICE_DONE,
+ TCMU_CMD_SET_FEATURES,
__TCMU_CMD_MAX,
};
#define TCMU_CMD_MAX (__TCMU_CMD_MAX - 1)
@@ -138,6 +143,13 @@
TCMU_ATTR_UNSPEC,
TCMU_ATTR_DEVICE,
TCMU_ATTR_MINOR,
+ TCMU_ATTR_PAD,
+ TCMU_ATTR_DEV_CFG,
+ TCMU_ATTR_DEV_SIZE,
+ TCMU_ATTR_WRITECACHE,
+ TCMU_ATTR_CMD_STATUS,
+ TCMU_ATTR_DEVICE_ID,
+ TCMU_ATTR_SUPP_KERN_CMD_REPLY,
__TCMU_ATTR_MAX,
};
#define TCMU_ATTR_MAX (__TCMU_ATTR_MAX - 1)
diff --git a/include/uapi/linux/usb/audio.h b/include/uapi/linux/usb/audio.h
index d2314be..a4680a5 100644
--- a/include/uapi/linux/usb/audio.h
+++ b/include/uapi/linux/usb/audio.h
@@ -333,7 +333,7 @@
__u8 bDescriptorType;
__u8 bDescriptorSubtype;
__u8 bUnitID;
- __u16 wProcessType;
+ __le16 wProcessType;
__u8 bNrInPins;
__u8 baSourceID[];
} __attribute__ ((packed));
@@ -491,8 +491,8 @@
__u8 bDescriptorType;
__u8 bDescriptorSubtype;
__u8 bFormatType;
- __u16 wMaxBitRate;
- __u16 wSamplesPerFrame;
+ __le16 wMaxBitRate;
+ __le16 wSamplesPerFrame;
__u8 bHeaderLength;
__u8 bSideBandProtocol;
} __attribute__((packed));
diff --git a/include/xen/balloon.h b/include/xen/balloon.h
index d1767df..8906361 100644
--- a/include/xen/balloon.h
+++ b/include/xen/balloon.h
@@ -35,3 +35,11 @@
return -ENOSYS;
}
#endif
+
+#ifdef CONFIG_XEN_BALLOON
+void xen_balloon_init(void);
+#else
+static inline void xen_balloon_init(void)
+{
+}
+#endif
diff --git a/init/main.c b/init/main.c
index df58a41..052481f 100644
--- a/init/main.c
+++ b/init/main.c
@@ -518,6 +518,7 @@
/*
* Set up the initial canary ASAP:
*/
+ add_latent_entropy();
boot_init_stack_canary();
cgroup_init_early();
diff --git a/ipc/msg.c b/ipc/msg.c
index 104926d..2c38f10 100644
--- a/ipc/msg.c
+++ b/ipc/msg.c
@@ -97,11 +97,11 @@
static void msg_rcu_free(struct rcu_head *head)
{
- struct ipc_rcu *p = container_of(head, struct ipc_rcu, rcu);
- struct msg_queue *msq = ipc_rcu_to_struct(p);
+ struct kern_ipc_perm *p = container_of(head, struct kern_ipc_perm, rcu);
+ struct msg_queue *msq = container_of(p, struct msg_queue, q_perm);
security_msg_queue_free(msq);
- ipc_rcu_free(head);
+ kvfree(msq);
}
/**
@@ -114,12 +114,12 @@
static int newque(struct ipc_namespace *ns, struct ipc_params *params)
{
struct msg_queue *msq;
- int id, retval;
+ int retval;
key_t key = params->key;
int msgflg = params->flg;
- msq = ipc_rcu_alloc(sizeof(*msq));
- if (!msq)
+ msq = kvmalloc(sizeof(*msq), GFP_KERNEL);
+ if (unlikely(!msq))
return -ENOMEM;
msq->q_perm.mode = msgflg & S_IRWXUGO;
@@ -128,7 +128,7 @@
msq->q_perm.security = NULL;
retval = security_msg_queue_alloc(msq);
if (retval) {
- ipc_rcu_putref(msq, ipc_rcu_free);
+ kvfree(msq);
return retval;
}
@@ -142,10 +142,10 @@
INIT_LIST_HEAD(&msq->q_senders);
/* ipc_addid() locks msq upon success. */
- id = ipc_addid(&msg_ids(ns), &msq->q_perm, ns->msg_ctlmni);
- if (id < 0) {
- ipc_rcu_putref(msq, msg_rcu_free);
- return id;
+ retval = ipc_addid(&msg_ids(ns), &msq->q_perm, ns->msg_ctlmni);
+ if (retval < 0) {
+ call_rcu(&msq->q_perm.rcu, msg_rcu_free);
+ return retval;
}
ipc_unlock_object(&msq->q_perm);
@@ -249,7 +249,7 @@
free_msg(msg);
}
atomic_sub(msq->q_cbytes, &ns->msg_bytes);
- ipc_rcu_putref(msq, msg_rcu_free);
+ ipc_rcu_putref(&msq->q_perm, msg_rcu_free);
}
/*
@@ -688,7 +688,7 @@
/* enqueue the sender and prepare to block */
ss_add(msq, &s, msgsz);
- if (!ipc_rcu_getref(msq)) {
+ if (!ipc_rcu_getref(&msq->q_perm)) {
err = -EIDRM;
goto out_unlock0;
}
@@ -700,7 +700,7 @@
rcu_read_lock();
ipc_lock_object(&msq->q_perm);
- ipc_rcu_putref(msq, msg_rcu_free);
+ ipc_rcu_putref(&msq->q_perm, msg_rcu_free);
/* raced with RMID? */
if (!ipc_valid_object(&msq->q_perm)) {
err = -EIDRM;
@@ -1034,7 +1034,8 @@
static int sysvipc_msg_proc_show(struct seq_file *s, void *it)
{
struct user_namespace *user_ns = seq_user_ns(s);
- struct msg_queue *msq = it;
+ struct kern_ipc_perm *ipcp = it;
+ struct msg_queue *msq = container_of(ipcp, struct msg_queue, q_perm);
seq_printf(s,
"%10d %10d %4o %10lu %10lu %5u %5u %5u %5u %5u %5u %10lu %10lu %10lu\n",
diff --git a/ipc/sem.c b/ipc/sem.c
index 947dc23..38371e9 100644
--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -87,24 +87,6 @@
#include <linux/uaccess.h>
#include "util.h"
-/* One semaphore structure for each semaphore in the system. */
-struct sem {
- int semval; /* current value */
- /*
- * PID of the process that last modified the semaphore. For
- * Linux, specifically these are:
- * - semop
- * - semctl, via SETVAL and SETALL.
- * - at task exit when performing undo adjustments (see exit_sem).
- */
- int sempid;
- spinlock_t lock; /* spinlock for fine-grained semtimedop */
- struct list_head pending_alter; /* pending single-sop operations */
- /* that alter the semaphore */
- struct list_head pending_const; /* pending single-sop operations */
- /* that do not alter the semaphore*/
- time_t sem_otime; /* candidate for sem_otime */
-} ____cacheline_aligned_in_smp;
/* One queue for each sleeping process in the system. */
struct sem_queue {
@@ -175,7 +157,7 @@
* sem_array.sem_undo
*
* b) global or semaphore sem_lock() for read/write:
- * sem_array.sem_base[i].pending_{const,alter}:
+ * sem_array.sems[i].pending_{const,alter}:
*
* c) special:
* sem_undo_list.list_proc:
@@ -250,7 +232,7 @@
*/
list_for_each_entry_safe(q, tq, &sma->pending_alter, list) {
struct sem *curr;
- curr = &sma->sem_base[q->sops[0].sem_num];
+ curr = &sma->sems[q->sops[0].sem_num];
list_add_tail(&q->list, &curr->pending_alter);
}
@@ -270,7 +252,7 @@
{
int i;
for (i = 0; i < sma->sem_nsems; i++) {
- struct sem *sem = sma->sem_base + i;
+ struct sem *sem = &sma->sems[i];
list_splice_init(&sem->pending_alter, &sma->pending_alter);
}
@@ -278,11 +260,11 @@
static void sem_rcu_free(struct rcu_head *head)
{
- struct ipc_rcu *p = container_of(head, struct ipc_rcu, rcu);
- struct sem_array *sma = ipc_rcu_to_struct(p);
+ struct kern_ipc_perm *p = container_of(head, struct kern_ipc_perm, rcu);
+ struct sem_array *sma = container_of(p, struct sem_array, sem_perm);
security_sem_free(sma);
- ipc_rcu_free(head);
+ kvfree(sma);
}
/*
@@ -306,7 +288,7 @@
sma->use_global_lock = USE_GLOBAL_LOCK_HYSTERESIS;
for (i = 0; i < sma->sem_nsems; i++) {
- sem = sma->sem_base + i;
+ sem = &sma->sems[i];
spin_lock(&sem->lock);
spin_unlock(&sem->lock);
}
@@ -366,7 +348,7 @@
*
* Both facts are tracked by use_global_mode.
*/
- sem = sma->sem_base + sops->sem_num;
+ sem = &sma->sems[sops->sem_num];
/*
* Initial check for use_global_lock. Just an optimization,
@@ -421,7 +403,7 @@
complexmode_tryleave(sma);
ipc_unlock_object(&sma->sem_perm);
} else {
- struct sem *sem = sma->sem_base + locknum;
+ struct sem *sem = &sma->sems[locknum];
spin_unlock(&sem->lock);
}
}
@@ -456,7 +438,7 @@
static inline void sem_lock_and_putref(struct sem_array *sma)
{
sem_lock(sma, NULL, -1);
- ipc_rcu_putref(sma, sem_rcu_free);
+ ipc_rcu_putref(&sma->sem_perm, sem_rcu_free);
}
static inline void sem_rmid(struct ipc_namespace *ns, struct sem_array *s)
@@ -464,6 +446,24 @@
ipc_rmid(&sem_ids(ns), &s->sem_perm);
}
+static struct sem_array *sem_alloc(size_t nsems)
+{
+ struct sem_array *sma;
+ size_t size;
+
+ if (nsems > (INT_MAX - sizeof(*sma)) / sizeof(sma->sems[0]))
+ return NULL;
+
+ size = sizeof(*sma) + nsems * sizeof(sma->sems[0]);
+ sma = kvmalloc(size, GFP_KERNEL);
+ if (unlikely(!sma))
+ return NULL;
+
+ memset(sma, 0, size);
+
+ return sma;
+}
+
/**
* newary - Create a new semaphore set
* @ns: namespace
@@ -473,10 +473,8 @@
*/
static int newary(struct ipc_namespace *ns, struct ipc_params *params)
{
- int id;
int retval;
struct sem_array *sma;
- int size;
key_t key = params->key;
int nsems = params->u.nsems;
int semflg = params->flg;
@@ -487,29 +485,24 @@
if (ns->used_sems + nsems > ns->sc_semmns)
return -ENOSPC;
- size = sizeof(*sma) + nsems * sizeof(struct sem);
- sma = ipc_rcu_alloc(size);
+ sma = sem_alloc(nsems);
if (!sma)
return -ENOMEM;
- memset(sma, 0, size);
-
sma->sem_perm.mode = (semflg & S_IRWXUGO);
sma->sem_perm.key = key;
sma->sem_perm.security = NULL;
retval = security_sem_alloc(sma);
if (retval) {
- ipc_rcu_putref(sma, ipc_rcu_free);
+ kvfree(sma);
return retval;
}
- sma->sem_base = (struct sem *) &sma[1];
-
for (i = 0; i < nsems; i++) {
- INIT_LIST_HEAD(&sma->sem_base[i].pending_alter);
- INIT_LIST_HEAD(&sma->sem_base[i].pending_const);
- spin_lock_init(&sma->sem_base[i].lock);
+ INIT_LIST_HEAD(&sma->sems[i].pending_alter);
+ INIT_LIST_HEAD(&sma->sems[i].pending_const);
+ spin_lock_init(&sma->sems[i].lock);
}
sma->complex_count = 0;
@@ -520,10 +513,10 @@
sma->sem_nsems = nsems;
sma->sem_ctime = get_seconds();
- id = ipc_addid(&sem_ids(ns), &sma->sem_perm, ns->sc_semmni);
- if (id < 0) {
- ipc_rcu_putref(sma, sem_rcu_free);
- return id;
+ retval = ipc_addid(&sem_ids(ns), &sma->sem_perm, ns->sc_semmni);
+ if (retval < 0) {
+ call_rcu(&sma->sem_perm.rcu, sem_rcu_free);
+ return retval;
}
ns->used_sems += nsems;
@@ -612,7 +605,7 @@
un = q->undo;
for (sop = sops; sop < sops + nsops; sop++) {
- curr = sma->sem_base + sop->sem_num;
+ curr = &sma->sems[sop->sem_num];
sem_op = sop->sem_op;
result = curr->semval;
@@ -639,7 +632,7 @@
sop--;
pid = q->pid;
while (sop >= sops) {
- sma->sem_base[sop->sem_num].sempid = pid;
+ sma->sems[sop->sem_num].sempid = pid;
sop--;
}
@@ -661,7 +654,7 @@
sop--;
while (sop >= sops) {
sem_op = sop->sem_op;
- sma->sem_base[sop->sem_num].semval -= sem_op;
+ sma->sems[sop->sem_num].semval -= sem_op;
if (sop->sem_flg & SEM_UNDO)
un->semadj[sop->sem_num] += sem_op;
sop--;
@@ -692,7 +685,7 @@
* until the operations can go through.
*/
for (sop = sops; sop < sops + nsops; sop++) {
- curr = sma->sem_base + sop->sem_num;
+ curr = &sma->sems[sop->sem_num];
sem_op = sop->sem_op;
result = curr->semval;
@@ -716,7 +709,7 @@
}
for (sop = sops; sop < sops + nsops; sop++) {
- curr = sma->sem_base + sop->sem_num;
+ curr = &sma->sems[sop->sem_num];
sem_op = sop->sem_op;
result = curr->semval;
@@ -815,7 +808,7 @@
if (semnum == -1)
pending_list = &sma->pending_const;
else
- pending_list = &sma->sem_base[semnum].pending_const;
+ pending_list = &sma->sems[semnum].pending_const;
list_for_each_entry_safe(q, tmp, pending_list, list) {
int error = perform_atomic_semop(sma, q);
@@ -856,7 +849,7 @@
for (i = 0; i < nsops; i++) {
int num = sops[i].sem_num;
- if (sma->sem_base[num].semval == 0) {
+ if (sma->sems[num].semval == 0) {
got_zero = 1;
semop_completed |= wake_const_ops(sma, num, wake_q);
}
@@ -867,7 +860,7 @@
* Assume all were changed.
*/
for (i = 0; i < sma->sem_nsems; i++) {
- if (sma->sem_base[i].semval == 0) {
+ if (sma->sems[i].semval == 0) {
got_zero = 1;
semop_completed |= wake_const_ops(sma, i, wake_q);
}
@@ -909,7 +902,7 @@
if (semnum == -1)
pending_list = &sma->pending_alter;
else
- pending_list = &sma->sem_base[semnum].pending_alter;
+ pending_list = &sma->sems[semnum].pending_alter;
again:
list_for_each_entry_safe(q, tmp, pending_list, list) {
@@ -922,7 +915,7 @@
* be in the per semaphore pending queue, and decrements
* cannot be successful if the value is already 0.
*/
- if (semnum != -1 && sma->sem_base[semnum].semval == 0)
+ if (semnum != -1 && sma->sems[semnum].semval == 0)
break;
error = perform_atomic_semop(sma, q);
@@ -959,9 +952,9 @@
static void set_semotime(struct sem_array *sma, struct sembuf *sops)
{
if (sops == NULL) {
- sma->sem_base[0].sem_otime = get_seconds();
+ sma->sems[0].sem_otime = get_seconds();
} else {
- sma->sem_base[sops[0].sem_num].sem_otime =
+ sma->sems[sops[0].sem_num].sem_otime =
get_seconds();
}
}
@@ -1067,9 +1060,9 @@
semcnt = 0;
/* First: check the simple operations. They are easy to evaluate */
if (count_zero)
- l = &sma->sem_base[semnum].pending_const;
+ l = &sma->sems[semnum].pending_const;
else
- l = &sma->sem_base[semnum].pending_alter;
+ l = &sma->sems[semnum].pending_alter;
list_for_each_entry(q, l, list) {
/* all task on a per-semaphore list sleep on exactly
@@ -1124,7 +1117,7 @@
wake_up_sem_queue_prepare(q, -EIDRM, &wake_q);
}
for (i = 0; i < sma->sem_nsems; i++) {
- struct sem *sem = sma->sem_base + i;
+ struct sem *sem = &sma->sems[i];
list_for_each_entry_safe(q, tq, &sem->pending_const, list) {
unlink_queue(sma, q);
wake_up_sem_queue_prepare(q, -EIDRM, &wake_q);
@@ -1142,7 +1135,7 @@
wake_up_q(&wake_q);
ns->used_sems -= sma->sem_nsems;
- ipc_rcu_putref(sma, sem_rcu_free);
+ ipc_rcu_putref(&sma->sem_perm, sem_rcu_free);
}
static unsigned long copy_semid_to_user(void __user *buf, struct semid64_ds *in, int version)
@@ -1174,9 +1167,9 @@
int i;
time_t res;
- res = sma->sem_base[0].sem_otime;
+ res = sma->sems[0].sem_otime;
for (i = 1; i < sma->sem_nsems; i++) {
- time_t to = sma->sem_base[i].sem_otime;
+ time_t to = sma->sems[i].sem_otime;
if (to > res)
res = to;
@@ -1325,7 +1318,7 @@
return -EIDRM;
}
- curr = &sma->sem_base[semnum];
+ curr = &sma->sems[semnum];
ipc_assert_locked_object(&sma->sem_perm);
list_for_each_entry(un, &sma->list_id, list_id)
@@ -1382,15 +1375,16 @@
goto out_unlock;
}
if (nsems > SEMMSL_FAST) {
- if (!ipc_rcu_getref(sma)) {
+ if (!ipc_rcu_getref(&sma->sem_perm)) {
err = -EIDRM;
goto out_unlock;
}
sem_unlock(sma, -1);
rcu_read_unlock();
- sem_io = ipc_alloc(sizeof(ushort)*nsems);
+ sem_io = kvmalloc_array(nsems, sizeof(ushort),
+ GFP_KERNEL);
if (sem_io == NULL) {
- ipc_rcu_putref(sma, sem_rcu_free);
+ ipc_rcu_putref(&sma->sem_perm, sem_rcu_free);
return -ENOMEM;
}
@@ -1402,7 +1396,7 @@
}
}
for (i = 0; i < sma->sem_nsems; i++)
- sem_io[i] = sma->sem_base[i].semval;
+ sem_io[i] = sma->sems[i].semval;
sem_unlock(sma, -1);
rcu_read_unlock();
err = 0;
@@ -1415,29 +1409,30 @@
int i;
struct sem_undo *un;
- if (!ipc_rcu_getref(sma)) {
+ if (!ipc_rcu_getref(&sma->sem_perm)) {
err = -EIDRM;
goto out_rcu_wakeup;
}
rcu_read_unlock();
if (nsems > SEMMSL_FAST) {
- sem_io = ipc_alloc(sizeof(ushort)*nsems);
+ sem_io = kvmalloc_array(nsems, sizeof(ushort),
+ GFP_KERNEL);
if (sem_io == NULL) {
- ipc_rcu_putref(sma, sem_rcu_free);
+ ipc_rcu_putref(&sma->sem_perm, sem_rcu_free);
return -ENOMEM;
}
}
if (copy_from_user(sem_io, p, nsems*sizeof(ushort))) {
- ipc_rcu_putref(sma, sem_rcu_free);
+ ipc_rcu_putref(&sma->sem_perm, sem_rcu_free);
err = -EFAULT;
goto out_free;
}
for (i = 0; i < nsems; i++) {
if (sem_io[i] > SEMVMX) {
- ipc_rcu_putref(sma, sem_rcu_free);
+ ipc_rcu_putref(&sma->sem_perm, sem_rcu_free);
err = -ERANGE;
goto out_free;
}
@@ -1450,8 +1445,8 @@
}
for (i = 0; i < nsems; i++) {
- sma->sem_base[i].semval = sem_io[i];
- sma->sem_base[i].sempid = task_tgid_vnr(current);
+ sma->sems[i].semval = sem_io[i];
+ sma->sems[i].sempid = task_tgid_vnr(current);
}
ipc_assert_locked_object(&sma->sem_perm);
@@ -1476,7 +1471,7 @@
err = -EIDRM;
goto out_unlock;
}
- curr = &sma->sem_base[semnum];
+ curr = &sma->sems[semnum];
switch (cmd) {
case GETVAL:
@@ -1500,7 +1495,7 @@
wake_up_q(&wake_q);
out_free:
if (sem_io != fast_sem_io)
- ipc_free(sem_io);
+ kvfree(sem_io);
return err;
}
@@ -1719,7 +1714,7 @@
}
nsems = sma->sem_nsems;
- if (!ipc_rcu_getref(sma)) {
+ if (!ipc_rcu_getref(&sma->sem_perm)) {
rcu_read_unlock();
un = ERR_PTR(-EIDRM);
goto out;
@@ -1729,7 +1724,7 @@
/* step 2: allocate new undo structure */
new = kzalloc(sizeof(struct sem_undo) + sizeof(short)*nsems, GFP_KERNEL);
if (!new) {
- ipc_rcu_putref(sma, sem_rcu_free);
+ ipc_rcu_putref(&sma->sem_perm, sem_rcu_free);
return ERR_PTR(-ENOMEM);
}
@@ -1932,7 +1927,7 @@
*/
if (nsops == 1) {
struct sem *curr;
- curr = &sma->sem_base[sops->sem_num];
+ curr = &sma->sems[sops->sem_num];
if (alter) {
if (sma->complex_count) {
@@ -2146,7 +2141,7 @@
/* perform adjustments registered in un */
for (i = 0; i < sma->sem_nsems; i++) {
- struct sem *semaphore = &sma->sem_base[i];
+ struct sem *semaphore = &sma->sems[i];
if (un->semadj[i]) {
semaphore->semval += un->semadj[i];
/*
@@ -2184,7 +2179,8 @@
static int sysvipc_sem_proc_show(struct seq_file *s, void *it)
{
struct user_namespace *user_ns = seq_user_ns(s);
- struct sem_array *sma = it;
+ struct kern_ipc_perm *ipcp = it;
+ struct sem_array *sma = container_of(ipcp, struct sem_array, sem_perm);
time_t sem_otime;
/*
diff --git a/ipc/shm.c b/ipc/shm.c
index f45c795..8828b4c 100644
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -174,11 +174,12 @@
static void shm_rcu_free(struct rcu_head *head)
{
- struct ipc_rcu *p = container_of(head, struct ipc_rcu, rcu);
- struct shmid_kernel *shp = ipc_rcu_to_struct(p);
-
+ struct kern_ipc_perm *ptr = container_of(head, struct kern_ipc_perm,
+ rcu);
+ struct shmid_kernel *shp = container_of(ptr, struct shmid_kernel,
+ shm_perm);
security_shm_free(shp);
- ipc_rcu_free(head);
+ kvfree(shp);
}
static inline void shm_rmid(struct ipc_namespace *ns, struct shmid_kernel *s)
@@ -241,7 +242,7 @@
user_shm_unlock(i_size_read(file_inode(shm_file)),
shp->mlock_user);
fput(shm_file);
- ipc_rcu_putref(shp, shm_rcu_free);
+ ipc_rcu_putref(&shp->shm_perm, shm_rcu_free);
}
/*
@@ -529,7 +530,6 @@
size_t numpages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
struct file *file;
char name[13];
- int id;
vm_flags_t acctflag = 0;
if (size < SHMMIN || size > ns->shm_ctlmax)
@@ -542,8 +542,8 @@
ns->shm_tot + numpages > ns->shm_ctlall)
return -ENOSPC;
- shp = ipc_rcu_alloc(sizeof(*shp));
- if (!shp)
+ shp = kvmalloc(sizeof(*shp), GFP_KERNEL);
+ if (unlikely(!shp))
return -ENOMEM;
shp->shm_perm.key = key;
@@ -553,7 +553,7 @@
shp->shm_perm.security = NULL;
error = security_shm_alloc(shp);
if (error) {
- ipc_rcu_putref(shp, ipc_rcu_free);
+ kvfree(shp);
return error;
}
@@ -598,11 +598,9 @@
shp->shm_file = file;
shp->shm_creator = current;
- id = ipc_addid(&shm_ids(ns), &shp->shm_perm, ns->shm_ctlmni);
- if (id < 0) {
- error = id;
+ error = ipc_addid(&shm_ids(ns), &shp->shm_perm, ns->shm_ctlmni);
+ if (error < 0)
goto no_id;
- }
list_add(&shp->shm_clist, ¤t->sysvshm.shm_clist);
@@ -624,7 +622,7 @@
user_shm_unlock(size, shp->mlock_user);
fput(file);
no_file:
- ipc_rcu_putref(shp, shm_rcu_free);
+ call_rcu(&shp->shm_perm.rcu, shm_rcu_free);
return error;
}
@@ -1382,9 +1380,11 @@
static int sysvipc_shm_proc_show(struct seq_file *s, void *it)
{
struct user_namespace *user_ns = seq_user_ns(s);
- struct shmid_kernel *shp = it;
+ struct kern_ipc_perm *ipcp = it;
+ struct shmid_kernel *shp;
unsigned long rss = 0, swp = 0;
+ shp = container_of(ipcp, struct shmid_kernel, shm_perm);
shm_add_rss_swap(shp, &rss, &swp);
#if BITS_PER_LONG <= 32
diff --git a/ipc/util.c b/ipc/util.c
index caec7b1..1a2cb02 100644
--- a/ipc/util.c
+++ b/ipc/util.c
@@ -232,6 +232,7 @@
idr_preload(GFP_KERNEL);
+ atomic_set(&new->refcount, 1);
spin_lock_init(&new->lock);
new->deleted = false;
rcu_read_lock();
@@ -394,70 +395,18 @@
ipcp->deleted = true;
}
-/**
- * ipc_alloc - allocate ipc space
- * @size: size desired
- *
- * Allocate memory from the appropriate pools and return a pointer to it.
- * NULL is returned if the allocation fails
- */
-void *ipc_alloc(int size)
+int ipc_rcu_getref(struct kern_ipc_perm *ptr)
{
- return kvmalloc(size, GFP_KERNEL);
+ return atomic_inc_not_zero(&ptr->refcount);
}
-/**
- * ipc_free - free ipc space
- * @ptr: pointer returned by ipc_alloc
- *
- * Free a block created with ipc_alloc().
- */
-void ipc_free(void *ptr)
+void ipc_rcu_putref(struct kern_ipc_perm *ptr,
+ void (*func)(struct rcu_head *head))
{
- kvfree(ptr);
-}
-
-/**
- * ipc_rcu_alloc - allocate ipc and rcu space
- * @size: size desired
- *
- * Allocate memory for the rcu header structure + the object.
- * Returns the pointer to the object or NULL upon failure.
- */
-void *ipc_rcu_alloc(int size)
-{
- /*
- * We prepend the allocation with the rcu struct
- */
- struct ipc_rcu *out = ipc_alloc(sizeof(struct ipc_rcu) + size);
- if (unlikely(!out))
- return NULL;
- atomic_set(&out->refcount, 1);
- return out + 1;
-}
-
-int ipc_rcu_getref(void *ptr)
-{
- struct ipc_rcu *p = ((struct ipc_rcu *)ptr) - 1;
-
- return atomic_inc_not_zero(&p->refcount);
-}
-
-void ipc_rcu_putref(void *ptr, void (*func)(struct rcu_head *head))
-{
- struct ipc_rcu *p = ((struct ipc_rcu *)ptr) - 1;
-
- if (!atomic_dec_and_test(&p->refcount))
+ if (!atomic_dec_and_test(&ptr->refcount))
return;
- call_rcu(&p->rcu, func);
-}
-
-void ipc_rcu_free(struct rcu_head *head)
-{
- struct ipc_rcu *p = container_of(head, struct ipc_rcu, rcu);
-
- kvfree(p);
+ call_rcu(&ptr->rcu, func);
}
/**
diff --git a/ipc/util.h b/ipc/util.h
index 60ddccc..c692010 100644
--- a/ipc/util.h
+++ b/ipc/util.h
@@ -47,13 +47,6 @@
static inline void shm_exit_ns(struct ipc_namespace *ns) { }
#endif
-struct ipc_rcu {
- struct rcu_head rcu;
- atomic_t refcount;
-} ____cacheline_aligned_in_smp;
-
-#define ipc_rcu_to_struct(p) ((void *)(p+1))
-
/*
* Structure that holds the parameters needed by the ipc operations
* (see after)
@@ -114,22 +107,18 @@
/* must be called with ipcp locked */
int ipcperms(struct ipc_namespace *ns, struct kern_ipc_perm *ipcp, short flg);
-/* for rare, potentially huge allocations.
- * both function can sleep
- */
-void *ipc_alloc(int size);
-void ipc_free(void *ptr);
-
/*
* For allocation that need to be freed by RCU.
* Objects are reference counted, they start with reference count 1.
* getref increases the refcount, the putref call that reduces the recount
* to 0 schedules the rcu destruction. Caller must guarantee locking.
+ *
+ * refcount is initialized by ipc_addid(), before that point call_rcu()
+ * must be used.
*/
-void *ipc_rcu_alloc(int size);
-int ipc_rcu_getref(void *ptr);
-void ipc_rcu_putref(void *ptr, void (*func)(struct rcu_head *head));
-void ipc_rcu_free(struct rcu_head *head);
+int ipc_rcu_getref(struct kern_ipc_perm *ptr);
+void ipc_rcu_putref(struct kern_ipc_perm *ptr,
+ void (*func)(struct rcu_head *head));
struct kern_ipc_perm *ipc_lock(struct ipc_ids *, int);
struct kern_ipc_perm *ipc_obtain_object_idr(struct ipc_ids *ids, int id);
diff --git a/kernel/Makefile b/kernel/Makefile
index 72aa080..4cb8e8b 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -82,7 +82,7 @@
obj-$(CONFIG_KGDB) += debug/
obj-$(CONFIG_DETECT_HUNG_TASK) += hung_task.o
obj-$(CONFIG_LOCKUP_DETECTOR) += watchdog.o
-obj-$(CONFIG_HARDLOCKUP_DETECTOR) += watchdog_hld.o
+obj-$(CONFIG_HARDLOCKUP_DETECTOR_PERF) += watchdog_hld.o
obj-$(CONFIG_SECCOMP) += seccomp.o
obj-$(CONFIG_RELAY) += relay.o
obj-$(CONFIG_SYSCTL) += utsname_sysctl.o
diff --git a/kernel/audit.c b/kernel/audit.c
index 833267b..6dd5569 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -641,6 +641,7 @@
ac = rcu_dereference(auditd_conn);
if (!ac) {
rcu_read_unlock();
+ kfree_skb(skb);
rc = -ECONNREFUSED;
goto err;
}
diff --git a/kernel/bpf/inode.c b/kernel/bpf/inode.c
index 9bbd334..e833ed9 100644
--- a/kernel/bpf/inode.c
+++ b/kernel/bpf/inode.c
@@ -377,10 +377,22 @@
bpf_any_put(inode->i_private, type);
}
+/*
+ * Display the mount options in /proc/mounts.
+ */
+static int bpf_show_options(struct seq_file *m, struct dentry *root)
+{
+ umode_t mode = d_inode(root)->i_mode & S_IALLUGO & ~S_ISVTX;
+
+ if (mode != S_IRWXUGO)
+ seq_printf(m, ",mode=%o", mode);
+ return 0;
+}
+
static const struct super_operations bpf_super_ops = {
.statfs = simple_statfs,
.drop_inode = generic_delete_inode,
- .show_options = generic_show_options,
+ .show_options = bpf_show_options,
.evict_inode = bpf_evict_inode,
};
@@ -434,8 +446,6 @@
struct inode *inode;
int ret;
- save_mount_options(sb, data);
-
ret = bpf_parse_options(data, &opts);
if (ret)
return ret;
diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c
index 045646d..6c772ad 100644
--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
@@ -1289,7 +1289,7 @@
info_len = min_t(u32, sizeof(info), info_len);
if (copy_from_user(&info, uinfo, info_len))
- return err;
+ return -EFAULT;
info.type = prog->type;
info.id = prog->aux->id;
@@ -1312,7 +1312,7 @@
}
ulen = info.xlated_prog_len;
- info.xlated_prog_len = bpf_prog_size(prog->len);
+ info.xlated_prog_len = bpf_prog_insn_size(prog);
if (info.xlated_prog_len && ulen) {
uinsns = u64_to_user_ptr(info.xlated_prog_insns);
ulen = min_t(u32, info.xlated_prog_len, ulen);
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 6a86723..664d939 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -504,6 +504,7 @@
{
regs[regno].min_value = BPF_REGISTER_MIN_RANGE;
regs[regno].max_value = BPF_REGISTER_MAX_RANGE;
+ regs[regno].value_from_signed = false;
regs[regno].min_align = 0;
}
@@ -777,12 +778,13 @@
return -EACCES;
}
-static bool is_pointer_value(struct bpf_verifier_env *env, int regno)
+static bool __is_pointer_value(bool allow_ptr_leaks,
+ const struct bpf_reg_state *reg)
{
- if (env->allow_ptr_leaks)
+ if (allow_ptr_leaks)
return false;
- switch (env->cur_state.regs[regno].type) {
+ switch (reg->type) {
case UNKNOWN_VALUE:
case CONST_IMM:
return false;
@@ -791,6 +793,11 @@
}
}
+static bool is_pointer_value(struct bpf_verifier_env *env, int regno)
+{
+ return __is_pointer_value(env->allow_ptr_leaks, &env->cur_state.regs[regno]);
+}
+
static int check_pkt_ptr_alignment(const struct bpf_reg_state *reg,
int off, int size, bool strict)
{
@@ -1832,10 +1839,24 @@
dst_align = dst_reg->min_align;
/* We don't know anything about what was done to this register, mark it
- * as unknown.
+ * as unknown. Also, if both derived bounds came from signed/unsigned
+ * mixed compares and one side is unbounded, we cannot really do anything
+ * with them as boundaries cannot be trusted. Thus, arithmetic of two
+ * regs of such kind will get invalidated bounds on the dst side.
*/
- if (min_val == BPF_REGISTER_MIN_RANGE &&
- max_val == BPF_REGISTER_MAX_RANGE) {
+ if ((min_val == BPF_REGISTER_MIN_RANGE &&
+ max_val == BPF_REGISTER_MAX_RANGE) ||
+ (BPF_SRC(insn->code) == BPF_X &&
+ ((min_val != BPF_REGISTER_MIN_RANGE &&
+ max_val == BPF_REGISTER_MAX_RANGE) ||
+ (min_val == BPF_REGISTER_MIN_RANGE &&
+ max_val != BPF_REGISTER_MAX_RANGE) ||
+ (dst_reg->min_value != BPF_REGISTER_MIN_RANGE &&
+ dst_reg->max_value == BPF_REGISTER_MAX_RANGE) ||
+ (dst_reg->min_value == BPF_REGISTER_MIN_RANGE &&
+ dst_reg->max_value != BPF_REGISTER_MAX_RANGE)) &&
+ regs[insn->dst_reg].value_from_signed !=
+ regs[insn->src_reg].value_from_signed)) {
reset_reg_range_values(regs, insn->dst_reg);
return;
}
@@ -1844,10 +1865,12 @@
* do our normal operations to the register, we need to set the values
* to the min/max since they are undefined.
*/
- if (min_val == BPF_REGISTER_MIN_RANGE)
- dst_reg->min_value = BPF_REGISTER_MIN_RANGE;
- if (max_val == BPF_REGISTER_MAX_RANGE)
- dst_reg->max_value = BPF_REGISTER_MAX_RANGE;
+ if (opcode != BPF_SUB) {
+ if (min_val == BPF_REGISTER_MIN_RANGE)
+ dst_reg->min_value = BPF_REGISTER_MIN_RANGE;
+ if (max_val == BPF_REGISTER_MAX_RANGE)
+ dst_reg->max_value = BPF_REGISTER_MAX_RANGE;
+ }
switch (opcode) {
case BPF_ADD:
@@ -1858,10 +1881,17 @@
dst_reg->min_align = min(src_align, dst_align);
break;
case BPF_SUB:
+ /* If one of our values was at the end of our ranges, then the
+ * _opposite_ value in the dst_reg goes to the end of our range.
+ */
+ if (min_val == BPF_REGISTER_MIN_RANGE)
+ dst_reg->max_value = BPF_REGISTER_MAX_RANGE;
+ if (max_val == BPF_REGISTER_MAX_RANGE)
+ dst_reg->min_value = BPF_REGISTER_MIN_RANGE;
if (dst_reg->min_value != BPF_REGISTER_MIN_RANGE)
- dst_reg->min_value -= min_val;
+ dst_reg->min_value -= max_val;
if (dst_reg->max_value != BPF_REGISTER_MAX_RANGE)
- dst_reg->max_value -= max_val;
+ dst_reg->max_value -= min_val;
dst_reg->min_align = min(src_align, dst_align);
break;
case BPF_MUL:
@@ -2023,6 +2053,7 @@
regs[insn->dst_reg].max_value = insn->imm;
regs[insn->dst_reg].min_value = insn->imm;
regs[insn->dst_reg].min_align = calc_align(insn->imm);
+ regs[insn->dst_reg].value_from_signed = false;
}
} else if (opcode > BPF_END) {
@@ -2198,40 +2229,63 @@
struct bpf_reg_state *false_reg, u64 val,
u8 opcode)
{
+ bool value_from_signed = true;
+ bool is_range = true;
+
switch (opcode) {
case BPF_JEQ:
/* If this is false then we know nothing Jon Snow, but if it is
* true then we know for sure.
*/
true_reg->max_value = true_reg->min_value = val;
+ is_range = false;
break;
case BPF_JNE:
/* If this is true we know nothing Jon Snow, but if it is false
* we know the value for sure;
*/
false_reg->max_value = false_reg->min_value = val;
+ is_range = false;
break;
case BPF_JGT:
- /* Unsigned comparison, the minimum value is 0. */
- false_reg->min_value = 0;
+ value_from_signed = false;
/* fallthrough */
case BPF_JSGT:
+ if (true_reg->value_from_signed != value_from_signed)
+ reset_reg_range_values(true_reg, 0);
+ if (false_reg->value_from_signed != value_from_signed)
+ reset_reg_range_values(false_reg, 0);
+ if (opcode == BPF_JGT) {
+ /* Unsigned comparison, the minimum value is 0. */
+ false_reg->min_value = 0;
+ }
/* If this is false then we know the maximum val is val,
* otherwise we know the min val is val+1.
*/
false_reg->max_value = val;
+ false_reg->value_from_signed = value_from_signed;
true_reg->min_value = val + 1;
+ true_reg->value_from_signed = value_from_signed;
break;
case BPF_JGE:
- /* Unsigned comparison, the minimum value is 0. */
- false_reg->min_value = 0;
+ value_from_signed = false;
/* fallthrough */
case BPF_JSGE:
+ if (true_reg->value_from_signed != value_from_signed)
+ reset_reg_range_values(true_reg, 0);
+ if (false_reg->value_from_signed != value_from_signed)
+ reset_reg_range_values(false_reg, 0);
+ if (opcode == BPF_JGE) {
+ /* Unsigned comparison, the minimum value is 0. */
+ false_reg->min_value = 0;
+ }
/* If this is false then we know the maximum value is val - 1,
* otherwise we know the mimimum value is val.
*/
false_reg->max_value = val - 1;
+ false_reg->value_from_signed = value_from_signed;
true_reg->min_value = val;
+ true_reg->value_from_signed = value_from_signed;
break;
default:
break;
@@ -2239,6 +2293,12 @@
check_reg_overflow(false_reg);
check_reg_overflow(true_reg);
+ if (is_range) {
+ if (__is_pointer_value(false, false_reg))
+ reset_reg_range_values(false_reg, 0);
+ if (__is_pointer_value(false, true_reg))
+ reset_reg_range_values(true_reg, 0);
+ }
}
/* Same as above, but for the case that dst_reg is a CONST_IMM reg and src_reg
@@ -2248,41 +2308,64 @@
struct bpf_reg_state *false_reg, u64 val,
u8 opcode)
{
+ bool value_from_signed = true;
+ bool is_range = true;
+
switch (opcode) {
case BPF_JEQ:
/* If this is false then we know nothing Jon Snow, but if it is
* true then we know for sure.
*/
true_reg->max_value = true_reg->min_value = val;
+ is_range = false;
break;
case BPF_JNE:
/* If this is true we know nothing Jon Snow, but if it is false
* we know the value for sure;
*/
false_reg->max_value = false_reg->min_value = val;
+ is_range = false;
break;
case BPF_JGT:
- /* Unsigned comparison, the minimum value is 0. */
- true_reg->min_value = 0;
+ value_from_signed = false;
/* fallthrough */
case BPF_JSGT:
+ if (true_reg->value_from_signed != value_from_signed)
+ reset_reg_range_values(true_reg, 0);
+ if (false_reg->value_from_signed != value_from_signed)
+ reset_reg_range_values(false_reg, 0);
+ if (opcode == BPF_JGT) {
+ /* Unsigned comparison, the minimum value is 0. */
+ true_reg->min_value = 0;
+ }
/*
* If this is false, then the val is <= the register, if it is
* true the register <= to the val.
*/
false_reg->min_value = val;
+ false_reg->value_from_signed = value_from_signed;
true_reg->max_value = val - 1;
+ true_reg->value_from_signed = value_from_signed;
break;
case BPF_JGE:
- /* Unsigned comparison, the minimum value is 0. */
- true_reg->min_value = 0;
+ value_from_signed = false;
/* fallthrough */
case BPF_JSGE:
+ if (true_reg->value_from_signed != value_from_signed)
+ reset_reg_range_values(true_reg, 0);
+ if (false_reg->value_from_signed != value_from_signed)
+ reset_reg_range_values(false_reg, 0);
+ if (opcode == BPF_JGE) {
+ /* Unsigned comparison, the minimum value is 0. */
+ true_reg->min_value = 0;
+ }
/* If this is false then constant < register, if it is true then
* the register < constant.
*/
false_reg->min_value = val + 1;
+ false_reg->value_from_signed = value_from_signed;
true_reg->max_value = val;
+ true_reg->value_from_signed = value_from_signed;
break;
default:
break;
@@ -2290,6 +2373,12 @@
check_reg_overflow(false_reg);
check_reg_overflow(true_reg);
+ if (is_range) {
+ if (__is_pointer_value(false, false_reg))
+ reset_reg_range_values(false_reg, 0);
+ if (__is_pointer_value(false, true_reg))
+ reset_reg_range_values(true_reg, 0);
+ }
}
static void mark_map_reg(struct bpf_reg_state *regs, u32 regno, u32 id,
diff --git a/kernel/cgroup/cgroup-internal.h b/kernel/cgroup/cgroup-internal.h
index 793565c..8b4c3c2 100644
--- a/kernel/cgroup/cgroup-internal.h
+++ b/kernel/cgroup/cgroup-internal.h
@@ -33,6 +33,9 @@
struct list_head src_csets;
struct list_head dst_csets;
+ /* the number of tasks in the set */
+ int nr_tasks;
+
/* the subsys currently being processed */
int ssid;
diff --git a/kernel/cgroup/cgroup.c b/kernel/cgroup/cgroup.c
index 620794a..df2e0f1 100644
--- a/kernel/cgroup/cgroup.c
+++ b/kernel/cgroup/cgroup.c
@@ -2006,6 +2006,8 @@
if (!cset->mg_src_cgrp)
return;
+ mgctx->tset.nr_tasks++;
+
list_move_tail(&task->cg_list, &cset->mg_tasks);
if (list_empty(&cset->mg_node))
list_add_tail(&cset->mg_node,
@@ -2094,21 +2096,19 @@
struct css_set *cset, *tmp_cset;
int ssid, failed_ssid, ret;
- /* methods shouldn't be called if no task is actually migrating */
- if (list_empty(&tset->src_csets))
- return 0;
-
/* check that we can legitimately attach to the cgroup */
- do_each_subsys_mask(ss, ssid, mgctx->ss_mask) {
- if (ss->can_attach) {
- tset->ssid = ssid;
- ret = ss->can_attach(tset);
- if (ret) {
- failed_ssid = ssid;
- goto out_cancel_attach;
+ if (tset->nr_tasks) {
+ do_each_subsys_mask(ss, ssid, mgctx->ss_mask) {
+ if (ss->can_attach) {
+ tset->ssid = ssid;
+ ret = ss->can_attach(tset);
+ if (ret) {
+ failed_ssid = ssid;
+ goto out_cancel_attach;
+ }
}
- }
- } while_each_subsys_mask();
+ } while_each_subsys_mask();
+ }
/*
* Now that we're guaranteed success, proceed to move all tasks to
@@ -2137,25 +2137,29 @@
*/
tset->csets = &tset->dst_csets;
- do_each_subsys_mask(ss, ssid, mgctx->ss_mask) {
- if (ss->attach) {
- tset->ssid = ssid;
- ss->attach(tset);
- }
- } while_each_subsys_mask();
+ if (tset->nr_tasks) {
+ do_each_subsys_mask(ss, ssid, mgctx->ss_mask) {
+ if (ss->attach) {
+ tset->ssid = ssid;
+ ss->attach(tset);
+ }
+ } while_each_subsys_mask();
+ }
ret = 0;
goto out_release_tset;
out_cancel_attach:
- do_each_subsys_mask(ss, ssid, mgctx->ss_mask) {
- if (ssid == failed_ssid)
- break;
- if (ss->cancel_attach) {
- tset->ssid = ssid;
- ss->cancel_attach(tset);
- }
- } while_each_subsys_mask();
+ if (tset->nr_tasks) {
+ do_each_subsys_mask(ss, ssid, mgctx->ss_mask) {
+ if (ssid == failed_ssid)
+ break;
+ if (ss->cancel_attach) {
+ tset->ssid = ssid;
+ ss->cancel_attach(tset);
+ }
+ } while_each_subsys_mask();
+ }
out_release_tset:
spin_lock_irq(&css_set_lock);
list_splice_init(&tset->dst_csets, &tset->src_csets);
@@ -2997,11 +3001,11 @@
cgrp->subtree_control &= ~disable;
ret = cgroup_apply_control(cgrp);
-
cgroup_finalize_control(cgrp, ret);
+ if (ret)
+ goto out_unlock;
kernfs_activate(cgrp->kn);
- ret = 0;
out_unlock:
cgroup_kn_unlock(of->kn);
return ret ?: nbytes;
@@ -4669,6 +4673,10 @@
if (ss->bind)
ss->bind(init_css_set.subsys[ssid]);
+
+ mutex_lock(&cgroup_mutex);
+ css_populate_dir(init_css_set.subsys[ssid]);
+ mutex_unlock(&cgroup_mutex);
}
/* init_css_set.subsys[] has been updated, re-hash */
diff --git a/kernel/cgroup/cpuset.c b/kernel/cgroup/cpuset.c
index ca8376e..8d51516 100644
--- a/kernel/cgroup/cpuset.c
+++ b/kernel/cgroup/cpuset.c
@@ -63,6 +63,7 @@
#include <linux/cgroup.h>
#include <linux/wait.h>
+DEFINE_STATIC_KEY_FALSE(cpusets_pre_enable_key);
DEFINE_STATIC_KEY_FALSE(cpusets_enabled_key);
/* See "Frequency meter" comments, below. */
diff --git a/kernel/cpu.c b/kernel/cpu.c
index ab86045..eee0331 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -279,7 +279,8 @@
/* Wait for the CPU to reach CPUHP_AP_ONLINE_IDLE */
wait_for_completion(&st->done);
- BUG_ON(!cpu_online(cpu));
+ if (WARN_ON_ONCE((!cpu_online(cpu))))
+ return -ECANCELED;
/* Unpark the stopper thread and the hotplug thread of the target cpu */
stop_machine_unpark(cpu);
diff --git a/kernel/crash_core.c b/kernel/crash_core.c
index fcbd568..6db80fc 100644
--- a/kernel/crash_core.c
+++ b/kernel/crash_core.c
@@ -14,10 +14,12 @@
#include <asm/sections.h>
/* vmcoreinfo stuff */
-static unsigned char vmcoreinfo_data[VMCOREINFO_BYTES];
-u32 vmcoreinfo_note[VMCOREINFO_NOTE_SIZE/4];
-size_t vmcoreinfo_size;
-size_t vmcoreinfo_max_size = sizeof(vmcoreinfo_data);
+static unsigned char *vmcoreinfo_data;
+static size_t vmcoreinfo_size;
+u32 *vmcoreinfo_note;
+
+/* trusted vmcoreinfo, e.g. we can make a copy in the crash memory */
+static unsigned char *vmcoreinfo_data_safecopy;
/*
* parsing the "crashkernel" commandline
@@ -324,8 +326,23 @@
final_note(buf);
}
+void crash_update_vmcoreinfo_safecopy(void *ptr)
+{
+ if (ptr)
+ memcpy(ptr, vmcoreinfo_data, vmcoreinfo_size);
+
+ vmcoreinfo_data_safecopy = ptr;
+}
+
void crash_save_vmcoreinfo(void)
{
+ if (!vmcoreinfo_note)
+ return;
+
+ /* Use the safe copy to generate vmcoreinfo note if have */
+ if (vmcoreinfo_data_safecopy)
+ vmcoreinfo_data = vmcoreinfo_data_safecopy;
+
vmcoreinfo_append_str("CRASHTIME=%ld\n", get_seconds());
update_vmcoreinfo_note();
}
@@ -340,7 +357,7 @@
r = vscnprintf(buf, sizeof(buf), fmt, args);
va_end(args);
- r = min(r, vmcoreinfo_max_size - vmcoreinfo_size);
+ r = min(r, (size_t)VMCOREINFO_BYTES - vmcoreinfo_size);
memcpy(&vmcoreinfo_data[vmcoreinfo_size], buf, r);
@@ -356,11 +373,26 @@
phys_addr_t __weak paddr_vmcoreinfo_note(void)
{
- return __pa_symbol((unsigned long)(char *)&vmcoreinfo_note);
+ return __pa(vmcoreinfo_note);
}
static int __init crash_save_vmcoreinfo_init(void)
{
+ vmcoreinfo_data = (unsigned char *)get_zeroed_page(GFP_KERNEL);
+ if (!vmcoreinfo_data) {
+ pr_warn("Memory allocation for vmcoreinfo_data failed\n");
+ return -ENOMEM;
+ }
+
+ vmcoreinfo_note = alloc_pages_exact(VMCOREINFO_NOTE_SIZE,
+ GFP_KERNEL | __GFP_ZERO);
+ if (!vmcoreinfo_note) {
+ free_page((unsigned long)vmcoreinfo_data);
+ vmcoreinfo_data = NULL;
+ pr_warn("Memory allocation for vmcoreinfo_note failed\n");
+ return -ENOMEM;
+ }
+
VMCOREINFO_OSRELEASE(init_uts_ns.name.release);
VMCOREINFO_PAGESIZE(PAGE_SIZE);
diff --git a/kernel/events/core.c b/kernel/events/core.c
index 1538df9..426c2ff 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -1452,6 +1452,13 @@
lockdep_assert_held(&ctx->lock);
+ /*
+ * It's 'group type', really, because if our group leader is
+ * pinned, so are we.
+ */
+ if (event->group_leader != event)
+ event = event->group_leader;
+
event_type = event->attr.pinned ? EVENT_PINNED : EVENT_FLEXIBLE;
if (!ctx->task)
event_type |= EVENT_CPU;
@@ -4378,7 +4385,9 @@
static int __perf_read_group_add(struct perf_event *leader,
u64 read_format, u64 *values)
{
+ struct perf_event_context *ctx = leader->ctx;
struct perf_event *sub;
+ unsigned long flags;
int n = 1; /* skip @nr */
int ret;
@@ -4408,12 +4417,15 @@
if (read_format & PERF_FORMAT_ID)
values[n++] = primary_event_id(leader);
+ raw_spin_lock_irqsave(&ctx->lock, flags);
+
list_for_each_entry(sub, &leader->sibling_list, group_entry) {
values[n++] += perf_event_count(sub);
if (read_format & PERF_FORMAT_ID)
values[n++] = primary_event_id(sub);
}
+ raw_spin_unlock_irqrestore(&ctx->lock, flags);
return 0;
}
@@ -7321,21 +7333,6 @@
return __perf_event_account_interrupt(event, 1);
}
-static bool sample_is_allowed(struct perf_event *event, struct pt_regs *regs)
-{
- /*
- * Due to interrupt latency (AKA "skid"), we may enter the
- * kernel before taking an overflow, even if the PMU is only
- * counting user events.
- * To avoid leaking information to userspace, we must always
- * reject kernel samples when exclude_kernel is set.
- */
- if (event->attr.exclude_kernel && !user_mode(regs))
- return false;
-
- return true;
-}
-
/*
* Generic event overflow handling, sampling.
*/
@@ -7357,12 +7354,6 @@
ret = __perf_event_account_interrupt(event, throttle);
/*
- * For security, drop the skid kernel samples if necessary.
- */
- if (!sample_is_allowed(event, regs))
- return ret;
-
- /*
* XXX event_limit might not quite work as expected on inherited
* events
*/
diff --git a/kernel/fork.c b/kernel/fork.c
index 0f69a3e..17921b0 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -205,19 +205,17 @@
void *stack;
int i;
- local_irq_disable();
for (i = 0; i < NR_CACHED_STACKS; i++) {
- struct vm_struct *s = this_cpu_read(cached_stacks[i]);
+ struct vm_struct *s;
+
+ s = this_cpu_xchg(cached_stacks[i], NULL);
if (!s)
continue;
- this_cpu_write(cached_stacks[i], NULL);
tsk->stack_vm_area = s;
- local_irq_enable();
return s->addr;
}
- local_irq_enable();
stack = __vmalloc_node_range(THREAD_SIZE, THREAD_SIZE,
VMALLOC_START, VMALLOC_END,
@@ -245,19 +243,15 @@
{
#ifdef CONFIG_VMAP_STACK
if (task_stack_vm_area(tsk)) {
- unsigned long flags;
int i;
- local_irq_save(flags);
for (i = 0; i < NR_CACHED_STACKS; i++) {
- if (this_cpu_read(cached_stacks[i]))
+ if (this_cpu_cmpxchg(cached_stacks[i],
+ NULL, tsk->stack_vm_area) != NULL)
continue;
- this_cpu_write(cached_stacks[i], tsk->stack_vm_area);
- local_irq_restore(flags);
return;
}
- local_irq_restore(flags);
vfree_atomic(tsk->stack);
return;
@@ -560,7 +554,7 @@
set_task_stack_end_magic(tsk);
#ifdef CONFIG_CC_STACKPROTECTOR
- tsk->stack_canary = get_random_long();
+ tsk->stack_canary = get_random_canary();
#endif
/*
@@ -579,6 +573,10 @@
kcov_task_init(tsk);
+#ifdef CONFIG_FAULT_INJECTION
+ tsk->fail_nth = 0;
+#endif
+
return tsk;
free_stack:
diff --git a/kernel/futex.c b/kernel/futex.c
index c934689..16dbe4c 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -212,7 +212,7 @@
atomic_t refcount;
union futex_key key;
-};
+} __randomize_layout;
/**
* struct futex_q - The hashed futex queue entry, one per waiting task
@@ -246,7 +246,7 @@
struct rt_mutex_waiter *rt_waiter;
union futex_key *requeue_pi_key;
u32 bitset;
-};
+} __randomize_layout;
static const struct futex_q futex_q_init = {
/* list gets initialized in queue_me()*/
diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index d171bc5..a3cc37c 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -170,21 +170,11 @@
irqd_clear(&desc->irq_data, IRQD_IRQ_DISABLED);
}
-static void irq_state_set_disabled(struct irq_desc *desc)
-{
- irqd_set(&desc->irq_data, IRQD_IRQ_DISABLED);
-}
-
static void irq_state_clr_masked(struct irq_desc *desc)
{
irqd_clear(&desc->irq_data, IRQD_IRQ_MASKED);
}
-static void irq_state_set_masked(struct irq_desc *desc)
-{
- irqd_set(&desc->irq_data, IRQD_IRQ_MASKED);
-}
-
static void irq_state_clr_started(struct irq_desc *desc)
{
irqd_clear(&desc->irq_data, IRQD_IRQ_STARTED);
diff --git a/kernel/irq/cpuhotplug.c b/kernel/irq/cpuhotplug.c
index aee8f7e..638eb9c 100644
--- a/kernel/irq/cpuhotplug.c
+++ b/kernel/irq/cpuhotplug.c
@@ -95,8 +95,13 @@
affinity = cpu_online_mask;
brokeaff = true;
}
-
- err = irq_do_set_affinity(d, affinity, true);
+ /*
+ * Do not set the force argument of irq_do_set_affinity() as this
+ * disables the masking of offline CPUs from the supplied affinity
+ * mask and therefore might keep/reassign the irq to the outgoing
+ * CPU.
+ */
+ err = irq_do_set_affinity(d, affinity, false);
if (err) {
pr_warn_ratelimited("IRQ%u: set affinity failed(%d).\n",
d->irq, err);
diff --git a/kernel/irq/internals.h b/kernel/irq/internals.h
index dbfba99..a2c4805 100644
--- a/kernel/irq/internals.h
+++ b/kernel/irq/internals.h
@@ -227,6 +227,16 @@
return __irqd_to_state(d) & mask;
}
+static inline void irq_state_set_disabled(struct irq_desc *desc)
+{
+ irqd_set(&desc->irq_data, IRQD_IRQ_DISABLED);
+}
+
+static inline void irq_state_set_masked(struct irq_desc *desc)
+{
+ irqd_set(&desc->irq_data, IRQD_IRQ_MASKED);
+}
+
#undef __irqd_to_state
static inline void kstat_incr_irqs_this_cpu(struct irq_desc *desc)
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 5624b2d..1d1a5b9 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -1090,6 +1090,16 @@
/*
* Internal function to register an irqaction - typically used to
* allocate special interrupts that are part of the architecture.
+ *
+ * Locking rules:
+ *
+ * desc->request_mutex Provides serialization against a concurrent free_irq()
+ * chip_bus_lock Provides serialization for slow bus operations
+ * desc->lock Provides serialization against hard interrupts
+ *
+ * chip_bus_lock and desc->lock are sufficient for all other management and
+ * interrupt related functions. desc->request_mutex solely serializes
+ * request/free_irq().
*/
static int
__setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new)
@@ -1167,20 +1177,35 @@
if (desc->irq_data.chip->flags & IRQCHIP_ONESHOT_SAFE)
new->flags &= ~IRQF_ONESHOT;
+ /*
+ * Protects against a concurrent __free_irq() call which might wait
+ * for synchronize_irq() to complete without holding the optional
+ * chip bus lock and desc->lock.
+ */
mutex_lock(&desc->request_mutex);
+
+ /*
+ * Acquire bus lock as the irq_request_resources() callback below
+ * might rely on the serialization or the magic power management
+ * functions which are abusing the irq_bus_lock() callback,
+ */
+ chip_bus_lock(desc);
+
+ /* First installed action requests resources. */
if (!desc->action) {
ret = irq_request_resources(desc);
if (ret) {
pr_err("Failed to request resources for %s (irq %d) on irqchip %s\n",
new->name, irq, desc->irq_data.chip->name);
- goto out_mutex;
+ goto out_bus_unlock;
}
}
- chip_bus_lock(desc);
-
/*
* The following block of code has to be executed atomically
+ * protected against a concurrent interrupt and any of the other
+ * management calls which are not serialized via
+ * desc->request_mutex or the optional bus lock.
*/
raw_spin_lock_irqsave(&desc->lock, flags);
old_ptr = &desc->action;
@@ -1286,10 +1311,8 @@
ret = __irq_set_trigger(desc,
new->flags & IRQF_TRIGGER_MASK);
- if (ret) {
- irq_release_resources(desc);
+ if (ret)
goto out_unlock;
- }
}
desc->istate &= ~(IRQS_AUTODETECT | IRQS_SPURIOUS_DISABLED | \
@@ -1385,12 +1408,10 @@
out_unlock:
raw_spin_unlock_irqrestore(&desc->lock, flags);
- chip_bus_sync_unlock(desc);
-
if (!desc->action)
irq_release_resources(desc);
-
-out_mutex:
+out_bus_unlock:
+ chip_bus_sync_unlock(desc);
mutex_unlock(&desc->request_mutex);
out_thread:
@@ -1472,6 +1493,7 @@
WARN(1, "Trying to free already-free IRQ %d\n", irq);
raw_spin_unlock_irqrestore(&desc->lock, flags);
chip_bus_sync_unlock(desc);
+ mutex_unlock(&desc->request_mutex);
return NULL;
}
@@ -1498,6 +1520,20 @@
#endif
raw_spin_unlock_irqrestore(&desc->lock, flags);
+ /*
+ * Drop bus_lock here so the changes which were done in the chip
+ * callbacks above are synced out to the irq chips which hang
+ * behind a slow bus (I2C, SPI) before calling synchronize_irq().
+ *
+ * Aside of that the bus_lock can also be taken from the threaded
+ * handler in irq_finalize_oneshot() which results in a deadlock
+ * because synchronize_irq() would wait forever for the thread to
+ * complete, which is blocked on the bus lock.
+ *
+ * The still held desc->request_mutex() protects against a
+ * concurrent request_irq() of this irq so the release of resources
+ * and timing data is properly serialized.
+ */
chip_bus_sync_unlock(desc);
unregister_handler_proc(irq, action);
@@ -1530,8 +1566,15 @@
}
}
+ /* Last action releases resources */
if (!desc->action) {
+ /*
+ * Reaquire bus lock as irq_release_resources() might
+ * require it to deallocate resources over the slow bus.
+ */
+ chip_bus_lock(desc);
irq_release_resources(desc);
+ chip_bus_sync_unlock(desc);
irq_remove_timings(desc);
}
diff --git a/kernel/irq/pm.c b/kernel/irq/pm.c
index cea1de0..6bd9b58 100644
--- a/kernel/irq/pm.c
+++ b/kernel/irq/pm.c
@@ -149,6 +149,8 @@
/* Pretend that it got disabled ! */
desc->depth++;
+ irq_state_set_disabled(desc);
+ irq_state_set_masked(desc);
resume:
desc->istate &= ~IRQS_SUSPENDED;
__enable_irq(desc);
diff --git a/kernel/kcmp.c b/kernel/kcmp.c
index 3a47fa9..ea34ed8 100644
--- a/kernel/kcmp.c
+++ b/kernel/kcmp.c
@@ -11,6 +11,10 @@
#include <linux/bug.h>
#include <linux/err.h>
#include <linux/kcmp.h>
+#include <linux/capability.h>
+#include <linux/list.h>
+#include <linux/eventpoll.h>
+#include <linux/file.h>
#include <asm/unistd.h>
@@ -94,6 +98,56 @@
return err;
}
+#ifdef CONFIG_EPOLL
+static int kcmp_epoll_target(struct task_struct *task1,
+ struct task_struct *task2,
+ unsigned long idx1,
+ struct kcmp_epoll_slot __user *uslot)
+{
+ struct file *filp, *filp_epoll, *filp_tgt;
+ struct kcmp_epoll_slot slot;
+ struct files_struct *files;
+
+ if (copy_from_user(&slot, uslot, sizeof(slot)))
+ return -EFAULT;
+
+ filp = get_file_raw_ptr(task1, idx1);
+ if (!filp)
+ return -EBADF;
+
+ files = get_files_struct(task2);
+ if (!files)
+ return -EBADF;
+
+ spin_lock(&files->file_lock);
+ filp_epoll = fcheck_files(files, slot.efd);
+ if (filp_epoll)
+ get_file(filp_epoll);
+ else
+ filp_tgt = ERR_PTR(-EBADF);
+ spin_unlock(&files->file_lock);
+ put_files_struct(files);
+
+ if (filp_epoll) {
+ filp_tgt = get_epoll_tfile_raw_ptr(filp_epoll, slot.tfd, slot.toff);
+ fput(filp_epoll);
+ } else
+
+ if (IS_ERR(filp_tgt))
+ return PTR_ERR(filp_tgt);
+
+ return kcmp_ptr(filp, filp_tgt, KCMP_FILE);
+}
+#else
+static int kcmp_epoll_target(struct task_struct *task1,
+ struct task_struct *task2,
+ unsigned long idx1,
+ struct kcmp_epoll_slot __user *uslot)
+{
+ return -EOPNOTSUPP;
+}
+#endif
+
SYSCALL_DEFINE5(kcmp, pid_t, pid1, pid_t, pid2, int, type,
unsigned long, idx1, unsigned long, idx2)
{
@@ -165,6 +219,9 @@
ret = -EOPNOTSUPP;
#endif
break;
+ case KCMP_EPOLL_TFD:
+ ret = kcmp_epoll_target(task1, task2, idx1, (void *)idx2);
+ break;
default:
ret = -EINVAL;
break;
diff --git a/kernel/kexec.c b/kernel/kexec.c
index 980936a..e62ec4d 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -144,6 +144,14 @@
if (ret)
goto out;
+ /*
+ * Some architecture(like S390) may touch the crash memory before
+ * machine_kexec_prepare(), we must copy vmcoreinfo data after it.
+ */
+ ret = kimage_crash_copy_vmcoreinfo(image);
+ if (ret)
+ goto out;
+
for (i = 0; i < nr_segments; i++) {
ret = kimage_load_segment(image, &image->segment[i]);
if (ret)
diff --git a/kernel/kexec_core.c b/kernel/kexec_core.c
index 154ffb4..1ae7c41 100644
--- a/kernel/kexec_core.c
+++ b/kernel/kexec_core.c
@@ -482,6 +482,40 @@
return pages;
}
+int kimage_crash_copy_vmcoreinfo(struct kimage *image)
+{
+ struct page *vmcoreinfo_page;
+ void *safecopy;
+
+ if (image->type != KEXEC_TYPE_CRASH)
+ return 0;
+
+ /*
+ * For kdump, allocate one vmcoreinfo safe copy from the
+ * crash memory. as we have arch_kexec_protect_crashkres()
+ * after kexec syscall, we naturally protect it from write
+ * (even read) access under kernel direct mapping. But on
+ * the other hand, we still need to operate it when crash
+ * happens to generate vmcoreinfo note, hereby we rely on
+ * vmap for this purpose.
+ */
+ vmcoreinfo_page = kimage_alloc_control_pages(image, 0);
+ if (!vmcoreinfo_page) {
+ pr_warn("Could not allocate vmcoreinfo buffer\n");
+ return -ENOMEM;
+ }
+ safecopy = vmap(&vmcoreinfo_page, 1, VM_MAP, PAGE_KERNEL);
+ if (!safecopy) {
+ pr_warn("Could not vmap vmcoreinfo buffer\n");
+ return -ENOMEM;
+ }
+
+ image->vmcoreinfo_data_copy = safecopy;
+ crash_update_vmcoreinfo_safecopy(safecopy);
+
+ return 0;
+}
+
static int kimage_add_entry(struct kimage *image, kimage_entry_t entry)
{
if (*image->entry != 0)
@@ -569,6 +603,11 @@
if (!image)
return;
+ if (image->vmcoreinfo_data_copy) {
+ crash_update_vmcoreinfo_safecopy(NULL);
+ vunmap(image->vmcoreinfo_data_copy);
+ }
+
kimage_free_extra_pages(image);
for_each_kimage_entry(image, ptr, entry) {
if (entry & IND_INDIRECTION) {
diff --git a/kernel/kexec_file.c b/kernel/kexec_file.c
index 766e7e4..9f48f44 100644
--- a/kernel/kexec_file.c
+++ b/kernel/kexec_file.c
@@ -26,13 +26,6 @@
#include <linux/vmalloc.h>
#include "kexec_internal.h"
-/*
- * Declare these symbols weak so that if architecture provides a purgatory,
- * these will be overridden.
- */
-char __weak kexec_purgatory[0];
-size_t __weak kexec_purgatory_size = 0;
-
static int kexec_calculate_store_digests(struct kimage *image);
/* Architectures can provide this probe function */
@@ -298,6 +291,14 @@
if (ret)
goto out;
+ /*
+ * Some architecture(like S390) may touch the crash memory before
+ * machine_kexec_prepare(), we must copy vmcoreinfo data after it.
+ */
+ ret = kimage_crash_copy_vmcoreinfo(image);
+ if (ret)
+ goto out;
+
ret = kexec_calculate_store_digests(image);
if (ret)
goto out;
diff --git a/kernel/kexec_internal.h b/kernel/kexec_internal.h
index 799a8a4..50dfcb0 100644
--- a/kernel/kexec_internal.h
+++ b/kernel/kexec_internal.h
@@ -17,6 +17,8 @@
#ifdef CONFIG_KEXEC_FILE
#include <linux/purgatory.h>
void kimage_file_post_load_cleanup(struct kimage *image);
+extern char kexec_purgatory[];
+extern size_t kexec_purgatory_size;
#else /* CONFIG_KEXEC_FILE */
static inline void kimage_file_post_load_cleanup(struct kimage *image) { }
#endif /* CONFIG_KEXEC_FILE */
diff --git a/kernel/kmod.c b/kernel/kmod.c
index 563f97e..6d016c5 100644
--- a/kernel/kmod.c
+++ b/kernel/kmod.c
@@ -45,8 +45,6 @@
#include <trace/events/module.h>
-extern int max_threads;
-
#define CAP_BSET (void *)1
#define CAP_PI (void *)2
@@ -56,6 +54,21 @@
static DECLARE_RWSEM(umhelper_sem);
#ifdef CONFIG_MODULES
+/*
+ * Assuming:
+ *
+ * threads = div64_u64((u64) totalram_pages * (u64) PAGE_SIZE,
+ * (u64) THREAD_SIZE * 8UL);
+ *
+ * If you need less than 50 threads would mean we're dealing with systems
+ * smaller than 3200 pages. This assuems you are capable of having ~13M memory,
+ * and this would only be an be an upper limit, after which the OOM killer
+ * would take effect. Systems like these are very unlikely if modules are
+ * enabled.
+ */
+#define MAX_KMOD_CONCURRENT 50
+static atomic_t kmod_concurrent_max = ATOMIC_INIT(MAX_KMOD_CONCURRENT);
+static DECLARE_WAIT_QUEUE_HEAD(kmod_wq);
/*
modprobe_path is set via /proc/sys.
@@ -127,11 +140,7 @@
{
va_list args;
char module_name[MODULE_NAME_LEN];
- unsigned int max_modprobes;
int ret;
- static atomic_t kmod_concurrent = ATOMIC_INIT(0);
-#define MAX_KMOD_CONCURRENT 50 /* Completely arbitrary value - KAO */
- static int kmod_loop_msg;
/*
* We don't allow synchronous module loading from async. Module
@@ -154,40 +163,25 @@
if (ret)
return ret;
- /* If modprobe needs a service that is in a module, we get a recursive
- * loop. Limit the number of running kmod threads to max_threads/2 or
- * MAX_KMOD_CONCURRENT, whichever is the smaller. A cleaner method
- * would be to run the parents of this process, counting how many times
- * kmod was invoked. That would mean accessing the internals of the
- * process tables to get the command line, proc_pid_cmdline is static
- * and it is not worth changing the proc code just to handle this case.
- * KAO.
- *
- * "trace the ppid" is simple, but will fail if someone's
- * parent exits. I think this is as good as it gets. --RR
- */
- max_modprobes = min(max_threads/2, MAX_KMOD_CONCURRENT);
- atomic_inc(&kmod_concurrent);
- if (atomic_read(&kmod_concurrent) > max_modprobes) {
- /* We may be blaming an innocent here, but unlikely */
- if (kmod_loop_msg < 5) {
- printk(KERN_ERR
- "request_module: runaway loop modprobe %s\n",
- module_name);
- kmod_loop_msg++;
- }
- atomic_dec(&kmod_concurrent);
- return -ENOMEM;
+ if (atomic_dec_if_positive(&kmod_concurrent_max) < 0) {
+ pr_warn_ratelimited("request_module: kmod_concurrent_max (%u) close to 0 (max_modprobes: %u), for module %s, throttling...",
+ atomic_read(&kmod_concurrent_max),
+ MAX_KMOD_CONCURRENT, module_name);
+ wait_event_interruptible(kmod_wq,
+ atomic_dec_if_positive(&kmod_concurrent_max) >= 0);
}
trace_module_request(module_name, wait, _RET_IP_);
ret = call_modprobe(module_name, wait ? UMH_WAIT_PROC : UMH_WAIT_EXEC);
- atomic_dec(&kmod_concurrent);
+ atomic_inc(&kmod_concurrent_max);
+ wake_up(&kmod_wq);
+
return ret;
}
EXPORT_SYMBOL(__request_module);
+
#endif /* CONFIG_MODULES */
static void call_usermodehelper_freeinfo(struct subprocess_info *info)
diff --git a/kernel/ksysfs.c b/kernel/ksysfs.c
index df1a9aa..46ba853 100644
--- a/kernel/ksysfs.c
+++ b/kernel/ksysfs.c
@@ -134,7 +134,7 @@
{
phys_addr_t vmcore_base = paddr_vmcoreinfo_note();
return sprintf(buf, "%pa %x\n", &vmcore_base,
- (unsigned int)sizeof(vmcoreinfo_note));
+ (unsigned int)VMCOREINFO_NOTE_SIZE);
}
KERNEL_ATTR_RO(vmcoreinfo);
diff --git a/kernel/locking/rtmutex.c b/kernel/locking/rtmutex.c
index 7806989..649dc9d 100644
--- a/kernel/locking/rtmutex.c
+++ b/kernel/locking/rtmutex.c
@@ -963,7 +963,6 @@
return -EDEADLK;
raw_spin_lock(&task->pi_lock);
- rt_mutex_adjust_prio(task);
waiter->task = task;
waiter->lock = lock;
waiter->prio = task->prio;
diff --git a/kernel/module.c b/kernel/module.c
index b0f92a3..40f983c 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -300,6 +300,7 @@
EXPORT_SYMBOL(unregister_module_notifier);
struct load_info {
+ const char *name;
Elf_Ehdr *hdr;
unsigned long len;
Elf_Shdr *sechdrs;
@@ -600,7 +601,7 @@
module_assert_mutex_or_preempt();
- list_for_each_entry(mod, &modules, list) {
+ list_for_each_entry_rcu(mod, &modules, list) {
if (!even_unformed && mod->state == MODULE_STATE_UNFORMED)
continue;
if (strlen(mod->name) == len && !memcmp(mod->name, name, len))
@@ -1273,12 +1274,13 @@
return *(u32 *)((void *)crc + *crc);
}
-static int check_version(Elf_Shdr *sechdrs,
- unsigned int versindex,
+static int check_version(const struct load_info *info,
const char *symname,
struct module *mod,
const s32 *crc)
{
+ Elf_Shdr *sechdrs = info->sechdrs;
+ unsigned int versindex = info->index.vers;
unsigned int i, num_versions;
struct modversion_info *versions;
@@ -1312,17 +1314,16 @@
}
/* Broken toolchain. Warn once, then let it go.. */
- pr_warn_once("%s: no symbol version for %s\n", mod->name, symname);
+ pr_warn_once("%s: no symbol version for %s\n", info->name, symname);
return 1;
bad_version:
pr_warn("%s: disagrees about version of symbol %s\n",
- mod->name, symname);
+ info->name, symname);
return 0;
}
-static inline int check_modstruct_version(Elf_Shdr *sechdrs,
- unsigned int versindex,
+static inline int check_modstruct_version(const struct load_info *info,
struct module *mod)
{
const s32 *crc;
@@ -1338,8 +1339,8 @@
BUG();
}
preempt_enable();
- return check_version(sechdrs, versindex,
- VMLINUX_SYMBOL_STR(module_layout), mod, crc);
+ return check_version(info, VMLINUX_SYMBOL_STR(module_layout),
+ mod, crc);
}
/* First part is kernel version, which we ignore if module has crcs. */
@@ -1353,8 +1354,7 @@
return strcmp(amagic, bmagic) == 0;
}
#else
-static inline int check_version(Elf_Shdr *sechdrs,
- unsigned int versindex,
+static inline int check_version(const struct load_info *info,
const char *symname,
struct module *mod,
const s32 *crc)
@@ -1362,8 +1362,7 @@
return 1;
}
-static inline int check_modstruct_version(Elf_Shdr *sechdrs,
- unsigned int versindex,
+static inline int check_modstruct_version(const struct load_info *info,
struct module *mod)
{
return 1;
@@ -1399,7 +1398,7 @@
if (!sym)
goto unlock;
- if (!check_version(info->sechdrs, info->index.vers, name, mod, crc)) {
+ if (!check_version(info, name, mod, crc)) {
sym = ERR_PTR(-EINVAL);
goto getname;
}
@@ -1662,21 +1661,6 @@
}
#endif /* CONFIG_KALLSYMS */
-static void add_usage_links(struct module *mod)
-{
-#ifdef CONFIG_MODULE_UNLOAD
- struct module_use *use;
- int nowarn;
-
- mutex_lock(&module_mutex);
- list_for_each_entry(use, &mod->target_list, target_list) {
- nowarn = sysfs_create_link(use->target->holders_dir,
- &mod->mkobj.kobj, mod->name);
- }
- mutex_unlock(&module_mutex);
-#endif
-}
-
static void del_usage_links(struct module *mod)
{
#ifdef CONFIG_MODULE_UNLOAD
@@ -1689,6 +1673,26 @@
#endif
}
+static int add_usage_links(struct module *mod)
+{
+ int ret = 0;
+#ifdef CONFIG_MODULE_UNLOAD
+ struct module_use *use;
+
+ mutex_lock(&module_mutex);
+ list_for_each_entry(use, &mod->target_list, target_list) {
+ ret = sysfs_create_link(use->target->holders_dir,
+ &mod->mkobj.kobj, mod->name);
+ if (ret)
+ break;
+ }
+ mutex_unlock(&module_mutex);
+ if (ret)
+ del_usage_links(mod);
+#endif
+ return ret;
+}
+
static int module_add_modinfo_attrs(struct module *mod)
{
struct module_attribute *attr;
@@ -1797,13 +1801,18 @@
if (err)
goto out_unreg_param;
- add_usage_links(mod);
+ err = add_usage_links(mod);
+ if (err)
+ goto out_unreg_modinfo_attrs;
+
add_sect_attrs(mod, info);
add_notes_attrs(mod, info);
kobject_uevent(&mod->mkobj.kobj, KOBJ_ADD);
return 0;
+out_unreg_modinfo_attrs:
+ module_remove_modinfo_attrs(mod);
out_unreg_param:
module_param_sysfs_remove(mod);
out_unreg_holders:
@@ -2910,9 +2919,15 @@
info->index.vers = 0; /* Pretend no __versions section! */
else
info->index.vers = find_sec(info, "__versions");
- info->index.info = find_sec(info, ".modinfo");
- info->sechdrs[info->index.info].sh_flags &= ~(unsigned long)SHF_ALLOC;
info->sechdrs[info->index.vers].sh_flags &= ~(unsigned long)SHF_ALLOC;
+
+ info->index.info = find_sec(info, ".modinfo");
+ if (!info->index.info)
+ info->name = "(missing .modinfo section)";
+ else
+ info->name = get_modinfo(info, "name");
+ info->sechdrs[info->index.info].sh_flags &= ~(unsigned long)SHF_ALLOC;
+
return 0;
}
@@ -2952,21 +2967,29 @@
info->index.mod = find_sec(info, ".gnu.linkonce.this_module");
if (!info->index.mod) {
- pr_warn("No module found in object\n");
+ pr_warn("%s: No module found in object\n",
+ info->name ?: "(missing .modinfo name field)");
return ERR_PTR(-ENOEXEC);
}
/* This is temporary: point mod into copy of data. */
mod = (void *)info->sechdrs[info->index.mod].sh_addr;
+ /*
+ * If we didn't load the .modinfo 'name' field, fall back to
+ * on-disk struct mod 'name' field.
+ */
+ if (!info->name)
+ info->name = mod->name;
+
if (info->index.sym == 0) {
- pr_warn("%s: module has no symbols (stripped?)\n", mod->name);
+ pr_warn("%s: module has no symbols (stripped?)\n", info->name);
return ERR_PTR(-ENOEXEC);
}
info->index.pcpu = find_pcpusec(info);
/* Check module struct version now, before we try to use module. */
- if (!check_modstruct_version(info->sechdrs, info->index.vers, mod))
+ if (!check_modstruct_version(info, mod))
return ERR_PTR(-ENOEXEC);
return mod;
@@ -2987,7 +3010,7 @@
return err;
} else if (!same_magic(modmagic, vermagic, info->index.vers)) {
pr_err("%s: version magic '%s' should be '%s'\n",
- mod->name, modmagic, vermagic);
+ info->name, modmagic, vermagic);
return -ENOEXEC;
}
@@ -3237,7 +3260,7 @@
/* module_blacklist is a comma-separated list of module names */
static char *module_blacklist;
-static bool blacklisted(char *module_name)
+static bool blacklisted(const char *module_name)
{
const char *p;
size_t len;
@@ -3267,7 +3290,7 @@
if (IS_ERR(mod))
return mod;
- if (blacklisted(mod->name))
+ if (blacklisted(info->name))
return ERR_PTR(-EPERM);
err = check_modinfo(mod, info, flags);
diff --git a/kernel/pid.c b/kernel/pid.c
index 731c4e5..c69c30d 100644
--- a/kernel/pid.c
+++ b/kernel/pid.c
@@ -575,13 +575,10 @@
*/
void __init pidhash_init(void)
{
- unsigned int pidhash_size;
-
pid_hash = alloc_large_system_hash("PID", sizeof(*pid_hash), 0, 18,
HASH_EARLY | HASH_SMALL | HASH_ZERO,
&pidhash_shift, NULL,
0, 4096);
- pidhash_size = 1U << pidhash_shift;
}
void __init pidmap_init(void)
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 17c667b..0869b20 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -2069,7 +2069,7 @@
/**
* try_to_wake_up_local - try to wake up a local task with rq lock held
* @p: the thread to be awakened
- * @cookie: context's cookie for pinning
+ * @rf: request-queue flags for pinning
*
* Put @p on the run-queue if it's not already there. The caller must
* ensure that this_rq() is locked, @p is bound to this_rq() and not
diff --git a/kernel/sched/cpufreq_schedutil.c b/kernel/sched/cpufreq_schedutil.c
index 076a2e3..29a3970 100644
--- a/kernel/sched/cpufreq_schedutil.c
+++ b/kernel/sched/cpufreq_schedutil.c
@@ -610,6 +610,11 @@
sg_cpu->sg_policy = sg_policy;
sg_cpu->flags = SCHED_CPUFREQ_RT;
sg_cpu->iowait_boost_max = policy->cpuinfo.max_freq;
+ }
+
+ for_each_cpu(cpu, policy->cpus) {
+ struct sugov_cpu *sg_cpu = &per_cpu(sugov_cpu, cpu);
+
cpufreq_add_update_util_hook(cpu, &sg_cpu->update_util,
policy_is_shared(policy) ?
sugov_update_shared :
diff --git a/kernel/sched/cputime.c b/kernel/sched/cputime.c
index 6e3ea4a..14d2dbf 100644
--- a/kernel/sched/cputime.c
+++ b/kernel/sched/cputime.c
@@ -683,7 +683,7 @@
{
unsigned long long clock;
- clock = sched_clock_cpu(smp_processor_id());
+ clock = sched_clock();
if (clock < vtime->starttime)
return 0;
@@ -814,7 +814,7 @@
write_seqcount_begin(&vtime->seqcount);
vtime->state = VTIME_SYS;
- vtime->starttime = sched_clock_cpu(smp_processor_id());
+ vtime->starttime = sched_clock();
write_seqcount_end(&vtime->seqcount);
}
@@ -826,7 +826,7 @@
local_irq_save(flags);
write_seqcount_begin(&vtime->seqcount);
vtime->state = VTIME_SYS;
- vtime->starttime = sched_clock_cpu(cpu);
+ vtime->starttime = sched_clock();
write_seqcount_end(&vtime->seqcount);
local_irq_restore(flags);
}
diff --git a/kernel/sched/deadline.c b/kernel/sched/deadline.c
index a84299f..755bd3f 100644
--- a/kernel/sched/deadline.c
+++ b/kernel/sched/deadline.c
@@ -1392,17 +1392,19 @@
struct sched_dl_entity *pi_se = &p->dl;
/*
- * Use the scheduling parameters of the top pi-waiter
- * task if we have one and its (absolute) deadline is
- * smaller than our one... OTW we keep our runtime and
- * deadline.
+ * Use the scheduling parameters of the top pi-waiter task if:
+ * - we have a top pi-waiter which is a SCHED_DEADLINE task AND
+ * - our dl_boosted is set (i.e. the pi-waiter's (absolute) deadline is
+ * smaller than our deadline OR we are a !SCHED_DEADLINE task getting
+ * boosted due to a SCHED_DEADLINE pi-waiter).
+ * Otherwise we keep our runtime and deadline.
*/
- if (pi_task && p->dl.dl_boosted && dl_prio(pi_task->normal_prio)) {
+ if (pi_task && dl_prio(pi_task->normal_prio) && p->dl.dl_boosted) {
pi_se = &pi_task->dl;
} else if (!dl_prio(p->normal_prio)) {
/*
* Special case in which we have a !SCHED_DEADLINE task
- * that is going to be deboosted, but exceedes its
+ * that is going to be deboosted, but exceeds its
* runtime while doing so. No point in replenishing
* it, as it's going to return back to its original
* scheduling class after this.
diff --git a/kernel/signal.c b/kernel/signal.c
index caed913..7e33f8c 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -3303,12 +3303,15 @@
#ifdef CONFIG_COMPAT
COMPAT_SYSCALL_DEFINE1(sigpending, compat_old_sigset_t __user *, set32)
{
+#ifdef __BIG_ENDIAN
sigset_t set;
- int err = do_sigpending(&set, sizeof(old_sigset_t));
- if (err == 0)
- if (copy_to_user(set32, &set, sizeof(old_sigset_t)))
- err = -EFAULT;
+ int err = do_sigpending(&set, sizeof(set.sig[0]));
+ if (!err)
+ err = put_user(set.sig[0], set32);
return err;
+#else
+ return sys_rt_sigpending((sigset_t __user *)set32, sizeof(*set32));
+#endif
}
#endif
diff --git a/kernel/sys.c b/kernel/sys.c
index 73fc0af..2855ee7 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1362,7 +1362,7 @@
ret = do_prlimit(current, resource, NULL, &r);
if (!ret) {
- struct rlimit r32;
+ struct compat_rlimit r32;
if (r.rlim_cur > COMPAT_RLIM_INFINITY)
r32.rlim_cur = COMPAT_RLIM_INFINITY;
else
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 4dfba1a..6648fbb 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -174,11 +174,32 @@
#ifdef CONFIG_PROC_SYSCTL
-#define SYSCTL_WRITES_LEGACY -1
-#define SYSCTL_WRITES_WARN 0
-#define SYSCTL_WRITES_STRICT 1
+/**
+ * enum sysctl_writes_mode - supported sysctl write modes
+ *
+ * @SYSCTL_WRITES_LEGACY: each write syscall must fully contain the sysctl value
+ * to be written, and multiple writes on the same sysctl file descriptor
+ * will rewrite the sysctl value, regardless of file position. No warning
+ * is issued when the initial position is not 0.
+ * @SYSCTL_WRITES_WARN: same as above but warn when the initial file position is
+ * not 0.
+ * @SYSCTL_WRITES_STRICT: writes to numeric sysctl entries must always be at
+ * file position 0 and the value must be fully contained in the buffer
+ * sent to the write syscall. If dealing with strings respect the file
+ * position, but restrict this to the max length of the buffer, anything
+ * passed the max lenght will be ignored. Multiple writes will append
+ * to the buffer.
+ *
+ * These write modes control how current file position affects the behavior of
+ * updating sysctl values through the proc interface on each write.
+ */
+enum sysctl_writes_mode {
+ SYSCTL_WRITES_LEGACY = -1,
+ SYSCTL_WRITES_WARN = 0,
+ SYSCTL_WRITES_STRICT = 1,
+};
-static int sysctl_writes_strict = SYSCTL_WRITES_STRICT;
+static enum sysctl_writes_mode sysctl_writes_strict = SYSCTL_WRITES_STRICT;
static int proc_do_cad_pid(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos);
@@ -880,6 +901,14 @@
#endif
},
{
+ .procname = "watchdog_cpumask",
+ .data = &watchdog_cpumask_bits,
+ .maxlen = NR_CPUS,
+ .mode = 0644,
+ .proc_handler = proc_watchdog_cpumask,
+ },
+#ifdef CONFIG_SOFTLOCKUP_DETECTOR
+ {
.procname = "soft_watchdog",
.data = &soft_watchdog_enabled,
.maxlen = sizeof (int),
@@ -889,13 +918,6 @@
.extra2 = &one,
},
{
- .procname = "watchdog_cpumask",
- .data = &watchdog_cpumask_bits,
- .maxlen = NR_CPUS,
- .mode = 0644,
- .proc_handler = proc_watchdog_cpumask,
- },
- {
.procname = "softlockup_panic",
.data = &softlockup_panic,
.maxlen = sizeof(int),
@@ -904,17 +926,6 @@
.extra1 = &zero,
.extra2 = &one,
},
-#ifdef CONFIG_HARDLOCKUP_DETECTOR
- {
- .procname = "hardlockup_panic",
- .data = &hardlockup_panic,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = proc_dointvec_minmax,
- .extra1 = &zero,
- .extra2 = &one,
- },
-#endif
#ifdef CONFIG_SMP
{
.procname = "softlockup_all_cpu_backtrace",
@@ -925,6 +936,19 @@
.extra1 = &zero,
.extra2 = &one,
},
+#endif /* CONFIG_SMP */
+#endif
+#ifdef CONFIG_HARDLOCKUP_DETECTOR
+ {
+ .procname = "hardlockup_panic",
+ .data = &hardlockup_panic,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec_minmax,
+ .extra1 = &zero,
+ .extra2 = &one,
+ },
+#ifdef CONFIG_SMP
{
.procname = "hardlockup_all_cpu_backtrace",
.data = &sysctl_hardlockup_all_cpu_backtrace,
@@ -936,6 +960,8 @@
},
#endif /* CONFIG_SMP */
#endif
+#endif
+
#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86)
{
.procname = "unknown_nmi_panic",
@@ -1950,6 +1976,32 @@
}
/**
+ * proc_first_pos_non_zero_ignore - check if firs position is allowed
+ * @ppos: file position
+ * @table: the sysctl table
+ *
+ * Returns true if the first position is non-zero and the sysctl_writes_strict
+ * mode indicates this is not allowed for numeric input types. String proc
+ * hadlers can ignore the return value.
+ */
+static bool proc_first_pos_non_zero_ignore(loff_t *ppos,
+ struct ctl_table *table)
+{
+ if (!*ppos)
+ return false;
+
+ switch (sysctl_writes_strict) {
+ case SYSCTL_WRITES_STRICT:
+ return true;
+ case SYSCTL_WRITES_WARN:
+ warn_sysctl_write(table);
+ return false;
+ default:
+ return false;
+ }
+}
+
+/**
* proc_dostring - read a string sysctl
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
@@ -1969,8 +2021,8 @@
int proc_dostring(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
- if (write && *ppos && sysctl_writes_strict == SYSCTL_WRITES_WARN)
- warn_sysctl_write(table);
+ if (write)
+ proc_first_pos_non_zero_ignore(ppos, table);
return _proc_do_string((char *)(table->data), table->maxlen, write,
(char __user *)buffer, lenp, ppos);
@@ -2128,19 +2180,18 @@
return 0;
}
-static int do_proc_douintvec_conv(bool *negp, unsigned long *lvalp,
- int *valp,
- int write, void *data)
+static int do_proc_douintvec_conv(unsigned long *lvalp,
+ unsigned int *valp,
+ int write, void *data)
{
if (write) {
- if (*negp)
+ if (*lvalp > UINT_MAX)
return -EINVAL;
if (*lvalp > UINT_MAX)
return -EINVAL;
*valp = *lvalp;
} else {
unsigned int val = *valp;
- *negp = false;
*lvalp = (unsigned long)val;
}
return 0;
@@ -2172,17 +2223,8 @@
conv = do_proc_dointvec_conv;
if (write) {
- if (*ppos) {
- switch (sysctl_writes_strict) {
- case SYSCTL_WRITES_STRICT:
- goto out;
- case SYSCTL_WRITES_WARN:
- warn_sysctl_write(table);
- break;
- default:
- break;
- }
- }
+ if (proc_first_pos_non_zero_ignore(ppos, table))
+ goto out;
if (left > PAGE_SIZE - 1)
left = PAGE_SIZE - 1;
@@ -2249,6 +2291,146 @@
buffer, lenp, ppos, conv, data);
}
+static int do_proc_douintvec_w(unsigned int *tbl_data,
+ struct ctl_table *table,
+ void __user *buffer,
+ size_t *lenp, loff_t *ppos,
+ int (*conv)(unsigned long *lvalp,
+ unsigned int *valp,
+ int write, void *data),
+ void *data)
+{
+ unsigned long lval;
+ int err = 0;
+ size_t left;
+ bool neg;
+ char *kbuf = NULL, *p;
+
+ left = *lenp;
+
+ if (proc_first_pos_non_zero_ignore(ppos, table))
+ goto bail_early;
+
+ if (left > PAGE_SIZE - 1)
+ left = PAGE_SIZE - 1;
+
+ p = kbuf = memdup_user_nul(buffer, left);
+ if (IS_ERR(kbuf))
+ return -EINVAL;
+
+ left -= proc_skip_spaces(&p);
+ if (!left) {
+ err = -EINVAL;
+ goto out_free;
+ }
+
+ err = proc_get_long(&p, &left, &lval, &neg,
+ proc_wspace_sep,
+ sizeof(proc_wspace_sep), NULL);
+ if (err || neg) {
+ err = -EINVAL;
+ goto out_free;
+ }
+
+ if (conv(&lval, tbl_data, 1, data)) {
+ err = -EINVAL;
+ goto out_free;
+ }
+
+ if (!err && left)
+ left -= proc_skip_spaces(&p);
+
+out_free:
+ kfree(kbuf);
+ if (err)
+ return -EINVAL;
+
+ return 0;
+
+ /* This is in keeping with old __do_proc_dointvec() */
+bail_early:
+ *ppos += *lenp;
+ return err;
+}
+
+static int do_proc_douintvec_r(unsigned int *tbl_data, void __user *buffer,
+ size_t *lenp, loff_t *ppos,
+ int (*conv)(unsigned long *lvalp,
+ unsigned int *valp,
+ int write, void *data),
+ void *data)
+{
+ unsigned long lval;
+ int err = 0;
+ size_t left;
+
+ left = *lenp;
+
+ if (conv(&lval, tbl_data, 0, data)) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ err = proc_put_long(&buffer, &left, lval, false);
+ if (err || !left)
+ goto out;
+
+ err = proc_put_char(&buffer, &left, '\n');
+
+out:
+ *lenp -= left;
+ *ppos += *lenp;
+
+ return err;
+}
+
+static int __do_proc_douintvec(void *tbl_data, struct ctl_table *table,
+ int write, void __user *buffer,
+ size_t *lenp, loff_t *ppos,
+ int (*conv)(unsigned long *lvalp,
+ unsigned int *valp,
+ int write, void *data),
+ void *data)
+{
+ unsigned int *i, vleft;
+
+ if (!tbl_data || !table->maxlen || !*lenp || (*ppos && !write)) {
+ *lenp = 0;
+ return 0;
+ }
+
+ i = (unsigned int *) tbl_data;
+ vleft = table->maxlen / sizeof(*i);
+
+ /*
+ * Arrays are not supported, keep this simple. *Do not* add
+ * support for them.
+ */
+ if (vleft != 1) {
+ *lenp = 0;
+ return -EINVAL;
+ }
+
+ if (!conv)
+ conv = do_proc_douintvec_conv;
+
+ if (write)
+ return do_proc_douintvec_w(i, table, buffer, lenp, ppos,
+ conv, data);
+ return do_proc_douintvec_r(i, buffer, lenp, ppos, conv, data);
+}
+
+static int do_proc_douintvec(struct ctl_table *table, int write,
+ void __user *buffer, size_t *lenp, loff_t *ppos,
+ int (*conv)(unsigned long *lvalp,
+ unsigned int *valp,
+ int write, void *data),
+ void *data)
+{
+ return __do_proc_douintvec(table->data, table, write,
+ buffer, lenp, ppos, conv, data);
+}
+
/**
* proc_dointvec - read a vector of integers
* @table: the sysctl table
@@ -2284,8 +2466,8 @@
int proc_douintvec(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
- return do_proc_dointvec(table, write, buffer, lenp, ppos,
- do_proc_douintvec_conv, NULL);
+ return do_proc_douintvec(table, write, buffer, lenp, ppos,
+ do_proc_douintvec_conv, NULL);
}
/*
@@ -2390,6 +2572,65 @@
do_proc_dointvec_minmax_conv, ¶m);
}
+struct do_proc_douintvec_minmax_conv_param {
+ unsigned int *min;
+ unsigned int *max;
+};
+
+static int do_proc_douintvec_minmax_conv(unsigned long *lvalp,
+ unsigned int *valp,
+ int write, void *data)
+{
+ struct do_proc_douintvec_minmax_conv_param *param = data;
+
+ if (write) {
+ unsigned int val = *lvalp;
+
+ if ((param->min && *param->min > val) ||
+ (param->max && *param->max < val))
+ return -ERANGE;
+
+ if (*lvalp > UINT_MAX)
+ return -EINVAL;
+ *valp = val;
+ } else {
+ unsigned int val = *valp;
+ *lvalp = (unsigned long) val;
+ }
+
+ return 0;
+}
+
+/**
+ * proc_douintvec_minmax - read a vector of unsigned ints with min/max values
+ * @table: the sysctl table
+ * @write: %TRUE if this is a write to the sysctl file
+ * @buffer: the user buffer
+ * @lenp: the size of the user buffer
+ * @ppos: file position
+ *
+ * Reads/writes up to table->maxlen/sizeof(unsigned int) unsigned integer
+ * values from/to the user buffer, treated as an ASCII string. Negative
+ * strings are not allowed.
+ *
+ * This routine will ensure the values are within the range specified by
+ * table->extra1 (min) and table->extra2 (max). There is a final sanity
+ * check for UINT_MAX to avoid having to support wrap around uses from
+ * userspace.
+ *
+ * Returns 0 on success.
+ */
+int proc_douintvec_minmax(struct ctl_table *table, int write,
+ void __user *buffer, size_t *lenp, loff_t *ppos)
+{
+ struct do_proc_douintvec_minmax_conv_param param = {
+ .min = (unsigned int *) table->extra1,
+ .max = (unsigned int *) table->extra2,
+ };
+ return do_proc_douintvec(table, write, buffer, lenp, ppos,
+ do_proc_douintvec_minmax_conv, ¶m);
+}
+
static void validate_coredump_safety(void)
{
#ifdef CONFIG_COREDUMP
@@ -2447,17 +2688,8 @@
left = *lenp;
if (write) {
- if (*ppos) {
- switch (sysctl_writes_strict) {
- case SYSCTL_WRITES_STRICT:
- goto out;
- case SYSCTL_WRITES_WARN:
- warn_sysctl_write(table);
- break;
- default:
- break;
- }
- }
+ if (proc_first_pos_non_zero_ignore(ppos, table))
+ goto out;
if (left > PAGE_SIZE - 1)
left = PAGE_SIZE - 1;
@@ -2898,6 +3130,12 @@
return -ENOSYS;
}
+int proc_douintvec_minmax(struct ctl_table *table, int write,
+ void __user *buffer, size_t *lenp, loff_t *ppos)
+{
+ return -ENOSYS;
+}
+
int proc_dointvec_jiffies(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
@@ -2940,6 +3178,7 @@
EXPORT_SYMBOL(proc_douintvec);
EXPORT_SYMBOL(proc_dointvec_jiffies);
EXPORT_SYMBOL(proc_dointvec_minmax);
+EXPORT_SYMBOL_GPL(proc_douintvec_minmax);
EXPORT_SYMBOL(proc_dointvec_userhz_jiffies);
EXPORT_SYMBOL(proc_dointvec_ms_jiffies);
EXPORT_SYMBOL(proc_dostring);
diff --git a/kernel/sysctl_binary.c b/kernel/sysctl_binary.c
index 939a158..02e1859 100644
--- a/kernel/sysctl_binary.c
+++ b/kernel/sysctl_binary.c
@@ -1346,7 +1346,7 @@
* CTL_KERN/KERN_VERSION is used by older glibc and cannot
* ever go away.
*/
- if (name[0] == CTL_KERN && name[1] == KERN_VERSION)
+ if (nlen >= 2 && name[0] == CTL_KERN && name[1] == KERN_VERSION)
return;
if (printk_ratelimit()) {
diff --git a/kernel/time/timer.c b/kernel/time/timer.c
index 71ce3f4..8f5d1bf 100644
--- a/kernel/time/timer.c
+++ b/kernel/time/timer.c
@@ -1495,7 +1495,7 @@
base->is_idle = false;
} else {
if (!is_max_delta)
- expires = basem + (nextevt - basej) * TICK_NSEC;
+ expires = basem + (u64)(nextevt - basej) * TICK_NSEC;
/*
* If we expect to sleep more than a tick, mark the base idle:
*/
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 2953d55..02004ae9 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -113,7 +113,7 @@
static DEFINE_MUTEX(ftrace_lock);
-static struct ftrace_ops *ftrace_ops_list __read_mostly = &ftrace_list_end;
+static struct ftrace_ops __rcu *ftrace_ops_list __read_mostly = &ftrace_list_end;
ftrace_func_t ftrace_trace_function __read_mostly = ftrace_stub;
static struct ftrace_ops global_ops;
@@ -169,8 +169,11 @@
mutex_lock(&ftrace_lock);
- for (ops = ftrace_ops_list;
- ops != &ftrace_list_end; ops = ops->next)
+ for (ops = rcu_dereference_protected(ftrace_ops_list,
+ lockdep_is_held(&ftrace_lock));
+ ops != &ftrace_list_end;
+ ops = rcu_dereference_protected(ops->next,
+ lockdep_is_held(&ftrace_lock)))
cnt++;
mutex_unlock(&ftrace_lock);
@@ -275,10 +278,11 @@
* If there's only one ftrace_ops registered, the ftrace_ops_list
* will point to the ops we want.
*/
- set_function_trace_op = ftrace_ops_list;
+ set_function_trace_op = rcu_dereference_protected(ftrace_ops_list,
+ lockdep_is_held(&ftrace_lock));
/* If there's no ftrace_ops registered, just call the stub function */
- if (ftrace_ops_list == &ftrace_list_end) {
+ if (set_function_trace_op == &ftrace_list_end) {
func = ftrace_stub;
/*
@@ -286,7 +290,8 @@
* recursion safe and not dynamic and the arch supports passing ops,
* then have the mcount trampoline call the function directly.
*/
- } else if (ftrace_ops_list->next == &ftrace_list_end) {
+ } else if (rcu_dereference_protected(ftrace_ops_list->next,
+ lockdep_is_held(&ftrace_lock)) == &ftrace_list_end) {
func = ftrace_ops_get_list_func(ftrace_ops_list);
} else {
@@ -348,9 +353,11 @@
return ftrace_trace_function == ftrace_ops_list_func;
}
-static void add_ftrace_ops(struct ftrace_ops **list, struct ftrace_ops *ops)
+static void add_ftrace_ops(struct ftrace_ops __rcu **list,
+ struct ftrace_ops *ops)
{
- ops->next = *list;
+ rcu_assign_pointer(ops->next, *list);
+
/*
* We are entering ops into the list but another
* CPU might be walking that list. We need to make sure
@@ -360,7 +367,8 @@
rcu_assign_pointer(*list, ops);
}
-static int remove_ftrace_ops(struct ftrace_ops **list, struct ftrace_ops *ops)
+static int remove_ftrace_ops(struct ftrace_ops __rcu **list,
+ struct ftrace_ops *ops)
{
struct ftrace_ops **p;
@@ -368,7 +376,10 @@
* If we are removing the last function, then simply point
* to the ftrace_stub.
*/
- if (*list == ops && ops->next == &ftrace_list_end) {
+ if (rcu_dereference_protected(*list,
+ lockdep_is_held(&ftrace_lock)) == ops &&
+ rcu_dereference_protected(ops->next,
+ lockdep_is_held(&ftrace_lock)) == &ftrace_list_end) {
*list = &ftrace_list_end;
return 0;
}
@@ -1569,8 +1580,8 @@
return 0;
#endif
- hash.filter_hash = rcu_dereference_raw_notrace(ops->func_hash->filter_hash);
- hash.notrace_hash = rcu_dereference_raw_notrace(ops->func_hash->notrace_hash);
+ rcu_assign_pointer(hash.filter_hash, ops->func_hash->filter_hash);
+ rcu_assign_pointer(hash.notrace_hash, ops->func_hash->notrace_hash);
if (hash_contains_ip(ip, &hash))
ret = 1;
@@ -2840,7 +2851,8 @@
* If there's no more ops registered with ftrace, run a
* sanity check to make sure all rec flags are cleared.
*/
- if (ftrace_ops_list == &ftrace_list_end) {
+ if (rcu_dereference_protected(ftrace_ops_list,
+ lockdep_is_held(&ftrace_lock)) == &ftrace_list_end) {
struct ftrace_page *pg;
struct dyn_ftrace *rec;
@@ -3816,7 +3828,7 @@
int exclude_mod = 0;
int found = 0;
int ret;
- int clear_filter;
+ int clear_filter = 0;
if (func) {
func_g.type = filter_parse_regex(func, len, &func_g.search,
@@ -3950,7 +3962,7 @@
continue;
/* no func matches all */
- if (!func || strcmp(func, "*") == 0 ||
+ if (strcmp(func, "*") == 0 ||
(ftrace_mod->func &&
strcmp(ftrace_mod->func, func) == 0)) {
ret = 0;
@@ -3978,6 +3990,7 @@
ftrace_set_regex(struct ftrace_ops *ops, unsigned char *buf, int len,
int reset, int enable);
+#ifdef CONFIG_MODULES
static void process_mod_list(struct list_head *head, struct ftrace_ops *ops,
char *mod, bool enable)
{
@@ -4068,6 +4081,7 @@
kfree(mod);
}
+#endif
/*
* We register the module command as a template to show others how
@@ -6451,7 +6465,8 @@
if (ftrace_enabled) {
/* we are starting ftrace again */
- if (ftrace_ops_list != &ftrace_list_end)
+ if (rcu_dereference_protected(ftrace_ops_list,
+ lockdep_is_held(&ftrace_lock)) != &ftrace_list_end)
update_ftrace_function();
ftrace_startup_sysctl();
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 4ae268e..529cc50 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -1136,12 +1136,12 @@
for (i = 0; i < nr_pages; i++) {
struct page *page;
/*
- * __GFP_NORETRY flag makes sure that the allocation fails
- * gracefully without invoking oom-killer and the system is
- * not destabilized.
+ * __GFP_RETRY_MAYFAIL flag makes sure that the allocation fails
+ * gracefully without invoking oom-killer and the system is not
+ * destabilized.
*/
bpage = kzalloc_node(ALIGN(sizeof(*bpage), cache_line_size()),
- GFP_KERNEL | __GFP_NORETRY,
+ GFP_KERNEL | __GFP_RETRY_MAYFAIL,
cpu_to_node(cpu));
if (!bpage)
goto free_pages;
@@ -1149,7 +1149,7 @@
list_add(&bpage->list, pages);
page = alloc_pages_node(cpu_to_node(cpu),
- GFP_KERNEL | __GFP_NORETRY, 0);
+ GFP_KERNEL | __GFP_RETRY_MAYFAIL, 0);
if (!page)
goto free_pages;
bpage->page = page_address(page);
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 948ec32..42b9355 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -1916,7 +1916,11 @@
{
unsigned pid, idx;
- if (!tsk->pid || unlikely(tsk->pid > PID_MAX_DEFAULT))
+ /* treat recording of idle task as a success */
+ if (!tsk->pid)
+ return 1;
+
+ if (unlikely(tsk->pid > PID_MAX_DEFAULT))
return 0;
/*
@@ -2002,7 +2006,11 @@
static int trace_save_tgid(struct task_struct *tsk)
{
- if (unlikely(!tgid_map || !tsk->pid || tsk->pid > PID_MAX_DEFAULT))
+ /* treat recording of idle task as a success */
+ if (!tsk->pid)
+ return 1;
+
+ if (unlikely(!tgid_map || tsk->pid > PID_MAX_DEFAULT))
return 0;
tgid_map[tsk->pid] = tsk->tgid;
@@ -2029,11 +2037,20 @@
*/
void tracing_record_taskinfo(struct task_struct *task, int flags)
{
+ bool done;
+
if (tracing_record_taskinfo_skip(flags))
return;
- if ((flags & TRACE_RECORD_CMDLINE) && !trace_save_cmdline(task))
- return;
- if ((flags & TRACE_RECORD_TGID) && !trace_save_tgid(task))
+
+ /*
+ * Record as much task information as possible. If some fail, continue
+ * to try to record the others.
+ */
+ done = !(flags & TRACE_RECORD_CMDLINE) || trace_save_cmdline(task);
+ done &= !(flags & TRACE_RECORD_TGID) || trace_save_tgid(task);
+
+ /* If recording any information failed, retry again soon. */
+ if (!done)
return;
__this_cpu_write(trace_taskinfo_save, false);
@@ -2050,15 +2067,22 @@
void tracing_record_taskinfo_sched_switch(struct task_struct *prev,
struct task_struct *next, int flags)
{
+ bool done;
+
if (tracing_record_taskinfo_skip(flags))
return;
- if ((flags & TRACE_RECORD_CMDLINE) &&
- (!trace_save_cmdline(prev) || !trace_save_cmdline(next)))
- return;
+ /*
+ * Record as much task information as possible. If some fail, continue
+ * to try to record the others.
+ */
+ done = !(flags & TRACE_RECORD_CMDLINE) || trace_save_cmdline(prev);
+ done &= !(flags & TRACE_RECORD_CMDLINE) || trace_save_cmdline(next);
+ done &= !(flags & TRACE_RECORD_TGID) || trace_save_tgid(prev);
+ done &= !(flags & TRACE_RECORD_TGID) || trace_save_tgid(next);
- if ((flags & TRACE_RECORD_TGID) &&
- (!trace_save_tgid(prev) || !trace_save_tgid(next)))
+ /* If recording any information failed, retry again soon. */
+ if (!done)
return;
__this_cpu_write(trace_taskinfo_save, false);
@@ -3334,14 +3358,23 @@
unsigned int flags)
{
bool tgid = flags & TRACE_ITER_RECORD_TGID;
+ const char tgid_space[] = " ";
+ const char space[] = " ";
- seq_printf(m, "# %s _-----=> irqs-off\n", tgid ? " " : "");
- seq_printf(m, "# %s / _----=> need-resched\n", tgid ? " " : "");
- seq_printf(m, "# %s| / _---=> hardirq/softirq\n", tgid ? " " : "");
- seq_printf(m, "# %s|| / _--=> preempt-depth\n", tgid ? " " : "");
- seq_printf(m, "# %s||| / delay\n", tgid ? " " : "");
- seq_printf(m, "# TASK-PID CPU#%s|||| TIMESTAMP FUNCTION\n", tgid ? " TGID " : "");
- seq_printf(m, "# | | | %s|||| | |\n", tgid ? " | " : "");
+ seq_printf(m, "# %s _-----=> irqs-off\n",
+ tgid ? tgid_space : space);
+ seq_printf(m, "# %s / _----=> need-resched\n",
+ tgid ? tgid_space : space);
+ seq_printf(m, "# %s| / _---=> hardirq/softirq\n",
+ tgid ? tgid_space : space);
+ seq_printf(m, "# %s|| / _--=> preempt-depth\n",
+ tgid ? tgid_space : space);
+ seq_printf(m, "# %s||| / delay\n",
+ tgid ? tgid_space : space);
+ seq_printf(m, "# TASK-PID CPU#%s|||| TIMESTAMP FUNCTION\n",
+ tgid ? " TGID " : space);
+ seq_printf(m, "# | | | %s|||| | |\n",
+ tgid ? " | " : space);
}
void
@@ -4689,6 +4722,76 @@
.llseek = generic_file_llseek,
};
+static void *saved_tgids_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ int *ptr = v;
+
+ if (*pos || m->count)
+ ptr++;
+
+ (*pos)++;
+
+ for (; ptr <= &tgid_map[PID_MAX_DEFAULT]; ptr++) {
+ if (trace_find_tgid(*ptr))
+ return ptr;
+ }
+
+ return NULL;
+}
+
+static void *saved_tgids_start(struct seq_file *m, loff_t *pos)
+{
+ void *v;
+ loff_t l = 0;
+
+ if (!tgid_map)
+ return NULL;
+
+ v = &tgid_map[0];
+ while (l <= *pos) {
+ v = saved_tgids_next(m, v, &l);
+ if (!v)
+ return NULL;
+ }
+
+ return v;
+}
+
+static void saved_tgids_stop(struct seq_file *m, void *v)
+{
+}
+
+static int saved_tgids_show(struct seq_file *m, void *v)
+{
+ int pid = (int *)v - tgid_map;
+
+ seq_printf(m, "%d %d\n", pid, trace_find_tgid(pid));
+ return 0;
+}
+
+static const struct seq_operations tracing_saved_tgids_seq_ops = {
+ .start = saved_tgids_start,
+ .stop = saved_tgids_stop,
+ .next = saved_tgids_next,
+ .show = saved_tgids_show,
+};
+
+static int tracing_saved_tgids_open(struct inode *inode, struct file *filp)
+{
+ if (tracing_disabled)
+ return -ENODEV;
+
+ return seq_open(filp, &tracing_saved_tgids_seq_ops);
+}
+
+
+static const struct file_operations tracing_saved_tgids_fops = {
+ .open = tracing_saved_tgids_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+
static void *saved_cmdlines_next(struct seq_file *m, void *v, loff_t *pos)
{
unsigned int *ptr = v;
@@ -7671,6 +7774,7 @@
}
kfree(tr->topts);
+ free_cpumask_var(tr->tracing_cpumask);
kfree(tr->name);
kfree(tr);
@@ -7921,6 +8025,9 @@
trace_create_file("saved_cmdlines_size", 0644, d_tracer,
NULL, &tracing_saved_cmdlines_size_fops);
+ trace_create_file("saved_tgids", 0444, d_tracer,
+ NULL, &tracing_saved_tgids_fops);
+
trace_eval_init();
trace_create_eval_file(d_tracer);
diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h
index 6ade1c5..490ba22 100644
--- a/kernel/trace/trace.h
+++ b/kernel/trace/trace.h
@@ -1210,9 +1210,9 @@
struct event_filter {
int n_preds; /* Number assigned */
int a_preds; /* allocated */
- struct filter_pred *preds;
- struct filter_pred *root;
- char *filter_string;
+ struct filter_pred __rcu *preds;
+ struct filter_pred __rcu *root;
+ char *filter_string;
};
struct event_subsystem {
diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c
index 2c52218..c9b5aa1 100644
--- a/kernel/trace/trace_kprobe.c
+++ b/kernel/trace/trace_kprobe.c
@@ -598,6 +598,14 @@
.priority = 1 /* Invoked after kprobe module callback */
};
+/* Convert certain expected symbols into '_' when generating event names */
+static inline void sanitize_event_name(char *name)
+{
+ while (*name++ != '\0')
+ if (*name == ':' || *name == '.')
+ *name = '_';
+}
+
static int create_trace_kprobe(int argc, char **argv)
{
/*
@@ -736,6 +744,7 @@
else
snprintf(buf, MAX_EVENT_NAME_LEN, "%c_0x%p",
is_return ? 'r' : 'p', addr);
+ sanitize_event_name(buf);
event = buf;
}
tk = alloc_trace_kprobe(group, event, addr, symbol, offset, maxactive,
diff --git a/kernel/trace/trace_stack.c b/kernel/trace/trace_stack.c
index b4a751e..a4df67c 100644
--- a/kernel/trace/trace_stack.c
+++ b/kernel/trace/trace_stack.c
@@ -406,6 +406,8 @@
.release = seq_release,
};
+#ifdef CONFIG_DYNAMIC_FTRACE
+
static int
stack_trace_filter_open(struct inode *inode, struct file *file)
{
@@ -423,6 +425,8 @@
.release = ftrace_regex_release,
};
+#endif /* CONFIG_DYNAMIC_FTRACE */
+
int
stack_trace_sysctl(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp,
@@ -477,8 +481,10 @@
trace_create_file("stack_trace", 0444, d_tracer,
NULL, &stack_trace_fops);
+#ifdef CONFIG_DYNAMIC_FTRACE
trace_create_file("stack_trace_filter", 0444, d_tracer,
&trace_ops, &stack_trace_filter_fops);
+#endif
if (stack_trace_filter_buf[0])
ftrace_set_early_filter(&trace_ops, stack_trace_filter_buf, 1);
diff --git a/kernel/watchdog.c b/kernel/watchdog.c
index 03e0b69..06d3389 100644
--- a/kernel/watchdog.c
+++ b/kernel/watchdog.c
@@ -9,7 +9,7 @@
* to those contributors as well.
*/
-#define pr_fmt(fmt) "NMI watchdog: " fmt
+#define pr_fmt(fmt) "watchdog: " fmt
#include <linux/mm.h>
#include <linux/cpu.h>
@@ -29,15 +29,58 @@
#include <linux/kvm_para.h>
#include <linux/kthread.h>
+/* Watchdog configuration */
static DEFINE_MUTEX(watchdog_proc_mutex);
-#if defined(CONFIG_HAVE_NMI_WATCHDOG) || defined(CONFIG_HARDLOCKUP_DETECTOR)
-unsigned long __read_mostly watchdog_enabled = SOFT_WATCHDOG_ENABLED|NMI_WATCHDOG_ENABLED;
+int __read_mostly nmi_watchdog_enabled;
+
+#if defined(CONFIG_HARDLOCKUP_DETECTOR) || defined(CONFIG_HAVE_NMI_WATCHDOG)
+unsigned long __read_mostly watchdog_enabled = SOFT_WATCHDOG_ENABLED |
+ NMI_WATCHDOG_ENABLED;
#else
unsigned long __read_mostly watchdog_enabled = SOFT_WATCHDOG_ENABLED;
#endif
-int __read_mostly nmi_watchdog_enabled;
+
+#ifdef CONFIG_HARDLOCKUP_DETECTOR
+/* boot commands */
+/*
+ * Should we panic when a soft-lockup or hard-lockup occurs:
+ */
+unsigned int __read_mostly hardlockup_panic =
+ CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE;
+/*
+ * We may not want to enable hard lockup detection by default in all cases,
+ * for example when running the kernel as a guest on a hypervisor. In these
+ * cases this function can be called to disable hard lockup detection. This
+ * function should only be executed once by the boot processor before the
+ * kernel command line parameters are parsed, because otherwise it is not
+ * possible to override this in hardlockup_panic_setup().
+ */
+void hardlockup_detector_disable(void)
+{
+ watchdog_enabled &= ~NMI_WATCHDOG_ENABLED;
+}
+
+static int __init hardlockup_panic_setup(char *str)
+{
+ if (!strncmp(str, "panic", 5))
+ hardlockup_panic = 1;
+ else if (!strncmp(str, "nopanic", 7))
+ hardlockup_panic = 0;
+ else if (!strncmp(str, "0", 1))
+ watchdog_enabled &= ~NMI_WATCHDOG_ENABLED;
+ else if (!strncmp(str, "1", 1))
+ watchdog_enabled |= NMI_WATCHDOG_ENABLED;
+ return 1;
+}
+__setup("nmi_watchdog=", hardlockup_panic_setup);
+
+#endif
+
+#ifdef CONFIG_SOFTLOCKUP_DETECTOR
int __read_mostly soft_watchdog_enabled;
+#endif
+
int __read_mostly watchdog_user_enabled;
int __read_mostly watchdog_thresh = 10;
@@ -45,15 +88,9 @@
int __read_mostly sysctl_softlockup_all_cpu_backtrace;
int __read_mostly sysctl_hardlockup_all_cpu_backtrace;
#endif
-static struct cpumask watchdog_cpumask __read_mostly;
+struct cpumask watchdog_cpumask __read_mostly;
unsigned long *watchdog_cpumask_bits = cpumask_bits(&watchdog_cpumask);
-/* Helper for online, unparked cpus. */
-#define for_each_watchdog_cpu(cpu) \
- for_each_cpu_and((cpu), cpu_online_mask, &watchdog_cpumask)
-
-atomic_t watchdog_park_in_progress = ATOMIC_INIT(0);
-
/*
* The 'watchdog_running' variable is set to 1 when the watchdog threads
* are registered/started and is set to 0 when the watchdog threads are
@@ -72,7 +109,47 @@
* of 'watchdog_running' cannot change while the watchdog is deactivated
* temporarily (see related code in 'proc' handlers).
*/
-static int __read_mostly watchdog_suspended;
+int __read_mostly watchdog_suspended;
+
+/*
+ * These functions can be overridden if an architecture implements its
+ * own hardlockup detector.
+ *
+ * watchdog_nmi_enable/disable can be implemented to start and stop when
+ * softlockup watchdog threads start and stop. The arch must select the
+ * SOFTLOCKUP_DETECTOR Kconfig.
+ */
+int __weak watchdog_nmi_enable(unsigned int cpu)
+{
+ return 0;
+}
+void __weak watchdog_nmi_disable(unsigned int cpu)
+{
+}
+
+/*
+ * watchdog_nmi_reconfigure can be implemented to be notified after any
+ * watchdog configuration change. The arch hardlockup watchdog should
+ * respond to the following variables:
+ * - nmi_watchdog_enabled
+ * - watchdog_thresh
+ * - watchdog_cpumask
+ * - sysctl_hardlockup_all_cpu_backtrace
+ * - hardlockup_panic
+ * - watchdog_suspended
+ */
+void __weak watchdog_nmi_reconfigure(void)
+{
+}
+
+
+#ifdef CONFIG_SOFTLOCKUP_DETECTOR
+
+/* Helper for online, unparked cpus. */
+#define for_each_watchdog_cpu(cpu) \
+ for_each_cpu_and((cpu), cpu_online_mask, &watchdog_cpumask)
+
+atomic_t watchdog_park_in_progress = ATOMIC_INIT(0);
static u64 __read_mostly sample_period;
@@ -120,6 +197,7 @@
return 1;
}
__setup("softlockup_all_cpu_backtrace=", softlockup_all_cpu_backtrace_setup);
+#ifdef CONFIG_HARDLOCKUP_DETECTOR
static int __init hardlockup_all_cpu_backtrace_setup(char *str)
{
sysctl_hardlockup_all_cpu_backtrace =
@@ -128,6 +206,7 @@
}
__setup("hardlockup_all_cpu_backtrace=", hardlockup_all_cpu_backtrace_setup);
#endif
+#endif
/*
* Hard-lockup warnings should be triggered after just a few seconds. Soft-
@@ -213,18 +292,6 @@
__this_cpu_write(watchdog_touch_ts, 0);
}
-/* watchdog detector functions */
-bool is_hardlockup(void)
-{
- unsigned long hrint = __this_cpu_read(hrtimer_interrupts);
-
- if (__this_cpu_read(hrtimer_interrupts_saved) == hrint)
- return true;
-
- __this_cpu_write(hrtimer_interrupts_saved, hrint);
- return false;
-}
-
static int is_softlockup(unsigned long touch_ts)
{
unsigned long now = get_timestamp();
@@ -237,23 +304,23 @@
return 0;
}
+/* watchdog detector functions */
+bool is_hardlockup(void)
+{
+ unsigned long hrint = __this_cpu_read(hrtimer_interrupts);
+
+ if (__this_cpu_read(hrtimer_interrupts_saved) == hrint)
+ return true;
+
+ __this_cpu_write(hrtimer_interrupts_saved, hrint);
+ return false;
+}
+
static void watchdog_interrupt_count(void)
{
__this_cpu_inc(hrtimer_interrupts);
}
-/*
- * These two functions are mostly architecture specific
- * defining them as weak here.
- */
-int __weak watchdog_nmi_enable(unsigned int cpu)
-{
- return 0;
-}
-void __weak watchdog_nmi_disable(unsigned int cpu)
-{
-}
-
static int watchdog_enable_all_cpus(void);
static void watchdog_disable_all_cpus(void);
@@ -502,57 +569,6 @@
kthread_unpark(per_cpu(softlockup_watchdog, cpu));
}
-/*
- * Suspend the hard and soft lockup detector by parking the watchdog threads.
- */
-int lockup_detector_suspend(void)
-{
- int ret = 0;
-
- get_online_cpus();
- mutex_lock(&watchdog_proc_mutex);
- /*
- * Multiple suspend requests can be active in parallel (counted by
- * the 'watchdog_suspended' variable). If the watchdog threads are
- * running, the first caller takes care that they will be parked.
- * The state of 'watchdog_running' cannot change while a suspend
- * request is active (see related code in 'proc' handlers).
- */
- if (watchdog_running && !watchdog_suspended)
- ret = watchdog_park_threads();
-
- if (ret == 0)
- watchdog_suspended++;
- else {
- watchdog_disable_all_cpus();
- pr_err("Failed to suspend lockup detectors, disabled\n");
- watchdog_enabled = 0;
- }
-
- mutex_unlock(&watchdog_proc_mutex);
-
- return ret;
-}
-
-/*
- * Resume the hard and soft lockup detector by unparking the watchdog threads.
- */
-void lockup_detector_resume(void)
-{
- mutex_lock(&watchdog_proc_mutex);
-
- watchdog_suspended--;
- /*
- * The watchdog threads are unparked if they were previously running
- * and if there is no more active suspend request.
- */
- if (watchdog_running && !watchdog_suspended)
- watchdog_unpark_threads();
-
- mutex_unlock(&watchdog_proc_mutex);
- put_online_cpus();
-}
-
static int update_watchdog_all_cpus(void)
{
int ret;
@@ -605,6 +621,100 @@
}
#ifdef CONFIG_SYSCTL
+static int watchdog_update_cpus(void)
+{
+ return smpboot_update_cpumask_percpu_thread(
+ &watchdog_threads, &watchdog_cpumask);
+}
+#endif
+
+#else /* SOFTLOCKUP */
+static int watchdog_park_threads(void)
+{
+ return 0;
+}
+
+static void watchdog_unpark_threads(void)
+{
+}
+
+static int watchdog_enable_all_cpus(void)
+{
+ return 0;
+}
+
+static void watchdog_disable_all_cpus(void)
+{
+}
+
+#ifdef CONFIG_SYSCTL
+static int watchdog_update_cpus(void)
+{
+ return 0;
+}
+#endif
+
+static void set_sample_period(void)
+{
+}
+#endif /* SOFTLOCKUP */
+
+/*
+ * Suspend the hard and soft lockup detector by parking the watchdog threads.
+ */
+int lockup_detector_suspend(void)
+{
+ int ret = 0;
+
+ get_online_cpus();
+ mutex_lock(&watchdog_proc_mutex);
+ /*
+ * Multiple suspend requests can be active in parallel (counted by
+ * the 'watchdog_suspended' variable). If the watchdog threads are
+ * running, the first caller takes care that they will be parked.
+ * The state of 'watchdog_running' cannot change while a suspend
+ * request is active (see related code in 'proc' handlers).
+ */
+ if (watchdog_running && !watchdog_suspended)
+ ret = watchdog_park_threads();
+
+ if (ret == 0)
+ watchdog_suspended++;
+ else {
+ watchdog_disable_all_cpus();
+ pr_err("Failed to suspend lockup detectors, disabled\n");
+ watchdog_enabled = 0;
+ }
+
+ watchdog_nmi_reconfigure();
+
+ mutex_unlock(&watchdog_proc_mutex);
+
+ return ret;
+}
+
+/*
+ * Resume the hard and soft lockup detector by unparking the watchdog threads.
+ */
+void lockup_detector_resume(void)
+{
+ mutex_lock(&watchdog_proc_mutex);
+
+ watchdog_suspended--;
+ /*
+ * The watchdog threads are unparked if they were previously running
+ * and if there is no more active suspend request.
+ */
+ if (watchdog_running && !watchdog_suspended)
+ watchdog_unpark_threads();
+
+ watchdog_nmi_reconfigure();
+
+ mutex_unlock(&watchdog_proc_mutex);
+ put_online_cpus();
+}
+
+#ifdef CONFIG_SYSCTL
/*
* Update the run state of the lockup detectors.
@@ -625,6 +735,8 @@
else
watchdog_disable_all_cpus();
+ watchdog_nmi_reconfigure();
+
return err;
}
@@ -810,10 +922,11 @@
* a temporary cpumask, so we are likely not in a
* position to do much else to make things better.
*/
- if (smpboot_update_cpumask_percpu_thread(
- &watchdog_threads, &watchdog_cpumask) != 0)
+ if (watchdog_update_cpus() != 0)
pr_err("cpumask update failed\n");
}
+
+ watchdog_nmi_reconfigure();
}
out:
mutex_unlock(&watchdog_proc_mutex);
diff --git a/kernel/watchdog_hld.c b/kernel/watchdog_hld.c
index 54a427d..295a0d8 100644
--- a/kernel/watchdog_hld.c
+++ b/kernel/watchdog_hld.c
@@ -22,41 +22,9 @@
static DEFINE_PER_CPU(bool, watchdog_nmi_touch);
static DEFINE_PER_CPU(struct perf_event *, watchdog_ev);
-/* boot commands */
-/*
- * Should we panic when a soft-lockup or hard-lockup occurs:
- */
-unsigned int __read_mostly hardlockup_panic =
- CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE;
static unsigned long hardlockup_allcpu_dumped;
-/*
- * We may not want to enable hard lockup detection by default in all cases,
- * for example when running the kernel as a guest on a hypervisor. In these
- * cases this function can be called to disable hard lockup detection. This
- * function should only be executed once by the boot processor before the
- * kernel command line parameters are parsed, because otherwise it is not
- * possible to override this in hardlockup_panic_setup().
- */
-void hardlockup_detector_disable(void)
-{
- watchdog_enabled &= ~NMI_WATCHDOG_ENABLED;
-}
-static int __init hardlockup_panic_setup(char *str)
-{
- if (!strncmp(str, "panic", 5))
- hardlockup_panic = 1;
- else if (!strncmp(str, "nopanic", 7))
- hardlockup_panic = 0;
- else if (!strncmp(str, "0", 1))
- watchdog_enabled &= ~NMI_WATCHDOG_ENABLED;
- else if (!strncmp(str, "1", 1))
- watchdog_enabled |= NMI_WATCHDOG_ENABLED;
- return 1;
-}
-__setup("nmi_watchdog=", hardlockup_panic_setup);
-
-void touch_nmi_watchdog(void)
+void arch_touch_nmi_watchdog(void)
{
/*
* Using __raw here because some code paths have
@@ -66,9 +34,8 @@
* going off.
*/
raw_cpu_write(watchdog_nmi_touch, true);
- touch_softlockup_watchdog();
}
-EXPORT_SYMBOL(touch_nmi_watchdog);
+EXPORT_SYMBOL(arch_touch_nmi_watchdog);
static struct perf_event_attr wd_hw_attr = {
.type = PERF_TYPE_HARDWARE,
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index a86688f..ca937b0 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -3577,6 +3577,13 @@
/* yeap, return possible CPUs in @node that @attrs wants */
cpumask_and(cpumask, attrs->cpumask, wq_numa_possible_cpumask[node]);
+
+ if (cpumask_empty(cpumask)) {
+ pr_warn_once("WARNING: workqueue cpumask: online intersect > "
+ "possible intersect\n");
+ return false;
+ }
+
return !cpumask_equal(cpumask, attrs->cpumask);
use_dfl:
@@ -3744,8 +3751,12 @@
return -EINVAL;
/* creating multiple pwqs breaks ordering guarantee */
- if (WARN_ON((wq->flags & __WQ_ORDERED) && !list_empty(&wq->pwqs)))
- return -EINVAL;
+ if (!list_empty(&wq->pwqs)) {
+ if (WARN_ON(wq->flags & __WQ_ORDERED_EXPLICIT))
+ return -EINVAL;
+
+ wq->flags &= ~__WQ_ORDERED;
+ }
ctx = apply_wqattrs_prepare(wq, attrs);
if (!ctx)
@@ -3929,6 +3940,16 @@
struct workqueue_struct *wq;
struct pool_workqueue *pwq;
+ /*
+ * Unbound && max_active == 1 used to imply ordered, which is no
+ * longer the case on NUMA machines due to per-node pools. While
+ * alloc_ordered_workqueue() is the right way to create an ordered
+ * workqueue, keep the previous behavior to avoid subtle breakages
+ * on NUMA.
+ */
+ if ((flags & WQ_UNBOUND) && max_active == 1)
+ flags |= __WQ_ORDERED;
+
/* see the comment above the definition of WQ_POWER_EFFICIENT */
if ((flags & WQ_POWER_EFFICIENT) && wq_power_efficient)
flags |= WQ_UNBOUND;
@@ -4119,13 +4140,14 @@
struct pool_workqueue *pwq;
/* disallow meddling with max_active for ordered workqueues */
- if (WARN_ON(wq->flags & __WQ_ORDERED))
+ if (WARN_ON(wq->flags & __WQ_ORDERED_EXPLICIT))
return;
max_active = wq_clamp_max_active(max_active, wq->flags, wq->name);
mutex_lock(&wq->mutex);
+ wq->flags &= ~__WQ_ORDERED;
wq->saved_max_active = max_active;
for_each_pwq(pwq, wq)
@@ -5253,7 +5275,7 @@
* attributes breaks ordering guarantee. Disallow exposing ordered
* workqueues.
*/
- if (WARN_ON(wq->flags & __WQ_ORDERED))
+ if (WARN_ON(wq->flags & __WQ_ORDERED_EXPLICIT))
return -EINVAL;
wq->wq_dev = wq_dev = kzalloc(sizeof(*wq_dev), GFP_KERNEL);
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index e20fc07..98fe715 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -778,34 +778,45 @@
menu "Debug Lockups and Hangs"
config LOCKUP_DETECTOR
- bool "Detect Hard and Soft Lockups"
+ bool
+
+config SOFTLOCKUP_DETECTOR
+ bool "Detect Soft Lockups"
depends on DEBUG_KERNEL && !S390
+ select LOCKUP_DETECTOR
help
Say Y here to enable the kernel to act as a watchdog to detect
- hard and soft lockups.
+ soft lockups.
Softlockups are bugs that cause the kernel to loop in kernel
mode for more than 20 seconds, without giving other tasks a
chance to run. The current stack trace is displayed upon
detection and the system will stay locked up.
+config HARDLOCKUP_DETECTOR_PERF
+ bool
+ select SOFTLOCKUP_DETECTOR
+
+#
+# arch/ can define HAVE_HARDLOCKUP_DETECTOR_ARCH to provide their own hard
+# lockup detector rather than the perf based detector.
+#
+config HARDLOCKUP_DETECTOR
+ bool "Detect Hard Lockups"
+ depends on DEBUG_KERNEL && !S390
+ depends on HAVE_HARDLOCKUP_DETECTOR_PERF || HAVE_HARDLOCKUP_DETECTOR_ARCH
+ select LOCKUP_DETECTOR
+ select HARDLOCKUP_DETECTOR_PERF if HAVE_HARDLOCKUP_DETECTOR_PERF
+ select HARDLOCKUP_DETECTOR_ARCH if HAVE_HARDLOCKUP_DETECTOR_ARCH
+ help
+ Say Y here to enable the kernel to act as a watchdog to detect
+ hard lockups.
+
Hardlockups are bugs that cause the CPU to loop in kernel mode
for more than 10 seconds, without letting other interrupts have a
chance to run. The current stack trace is displayed upon detection
and the system will stay locked up.
- The overhead should be minimal. A periodic hrtimer runs to
- generate interrupts and kick the watchdog task every 4 seconds.
- An NMI is generated every 10 seconds or so to check for hardlockups.
-
- The frequency of hrtimer and NMI events and the soft and hard lockup
- thresholds can be controlled through the sysctl watchdog_thresh.
-
-config HARDLOCKUP_DETECTOR
- def_bool y
- depends on LOCKUP_DETECTOR && !HAVE_NMI_WATCHDOG
- depends on PERF_EVENTS && HAVE_PERF_EVENTS_NMI
-
config BOOTPARAM_HARDLOCKUP_PANIC
bool "Panic (Reboot) On Hard Lockups"
depends on HARDLOCKUP_DETECTOR
@@ -826,7 +837,7 @@
config BOOTPARAM_SOFTLOCKUP_PANIC
bool "Panic (Reboot) On Soft Lockups"
- depends on LOCKUP_DETECTOR
+ depends on SOFTLOCKUP_DETECTOR
help
Say Y here to enable the kernel to panic on "soft lockups",
which are bugs that cause the kernel to loop in kernel
@@ -843,7 +854,7 @@
config BOOTPARAM_SOFTLOCKUP_PANIC_VALUE
int
- depends on LOCKUP_DETECTOR
+ depends on SOFTLOCKUP_DETECTOR
range 0 1
default 0 if !BOOTPARAM_SOFTLOCKUP_PANIC
default 1 if BOOTPARAM_SOFTLOCKUP_PANIC
@@ -851,7 +862,7 @@
config DETECT_HUNG_TASK
bool "Detect Hung Tasks"
depends on DEBUG_KERNEL
- default LOCKUP_DETECTOR
+ default SOFTLOCKUP_DETECTOR
help
Say Y here to enable the kernel to detect "hung tasks",
which are bugs that cause the task to be stuck in
@@ -1212,6 +1223,34 @@
It is also used by various kernel debugging features that require
stack trace generation.
+config WARN_ALL_UNSEEDED_RANDOM
+ bool "Warn for all uses of unseeded randomness"
+ default n
+ help
+ Some parts of the kernel contain bugs relating to their use of
+ cryptographically secure random numbers before it's actually possible
+ to generate those numbers securely. This setting ensures that these
+ flaws don't go unnoticed, by enabling a message, should this ever
+ occur. This will allow people with obscure setups to know when things
+ are going wrong, so that they might contact developers about fixing
+ it.
+
+ Unfortunately, on some models of some architectures getting
+ a fully seeded CRNG is extremely difficult, and so this can
+ result in dmesg getting spammed for a surprisingly long
+ time. This is really bad from a security perspective, and
+ so architecture maintainers really need to do what they can
+ to get the CRNG seeded sooner after the system is booted.
+ However, since users can not do anything actionble to
+ address this, by default the kernel will issue only a single
+ warning for the first use of unseeded randomness.
+
+ Say Y here if you want to receive warnings for all uses of
+ unseeded randomness. This will be of use primarily for
+ those developers interersted in improving the security of
+ Linux kernels running on their architecture (or
+ subarchitecture).
+
config DEBUG_KOBJECT
bool "kobject debugging"
depends on DEBUG_KERNEL
@@ -1785,6 +1824,17 @@
If unsure, say N.
+config TEST_SYSCTL
+ tristate "sysctl test driver"
+ default n
+ depends on PROC_SYSCTL
+ help
+ This builds the "test_sysctl" module. This driver enables to test the
+ proc sysctl interfaces available to drivers safely without affecting
+ production knobs which might alter system functionality.
+
+ If unsure, say N.
+
config TEST_UDELAY
tristate "udelay test driver"
default n
@@ -1825,6 +1875,33 @@
If unsure, say N.
+config TEST_KMOD
+ tristate "kmod stress tester"
+ default n
+ depends on m
+ depends on BLOCK && (64BIT || LBDAF) # for XFS, BTRFS
+ depends on NETDEVICES && NET_CORE && INET # for TUN
+ select TEST_LKM
+ select XFS_FS
+ select TUN
+ select BTRFS_FS
+ help
+ Test the kernel's module loading mechanism: kmod. kmod implements
+ support to load modules using the Linux kernel's usermode helper.
+ This test provides a series of tests against kmod.
+
+ Although technically you can either build test_kmod as a module or
+ into the kernel we disallow building it into the kernel since
+ it stress tests request_module() and this will very likely cause
+ some issues by taking over precious threads available from other
+ module load requests, ultimately this could be fatal.
+
+ To run tests run:
+
+ tools/testing/selftests/kmod/kmod.sh --help
+
+ If unsure, say N.
+
source "samples/Kconfig"
source "lib/Kconfig.kgdb"
diff --git a/lib/Makefile b/lib/Makefile
index 5a00832..40c1837 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -46,6 +46,7 @@
obj-y += kstrtox.o
obj-$(CONFIG_TEST_BPF) += test_bpf.o
obj-$(CONFIG_TEST_FIRMWARE) += test_firmware.o
+obj-$(CONFIG_TEST_SYSCTL) += test_sysctl.o
obj-$(CONFIG_TEST_HASH) += test_hash.o test_siphash.o
obj-$(CONFIG_TEST_KASAN) += test_kasan.o
obj-$(CONFIG_TEST_KSTRTOX) += test-kstrtox.o
@@ -60,6 +61,7 @@
obj-$(CONFIG_TEST_BITMAP) += test_bitmap.o
obj-$(CONFIG_TEST_UUID) += test_uuid.o
obj-$(CONFIG_TEST_PARMAN) += test_parman.o
+obj-$(CONFIG_TEST_KMOD) += test_kmod.o
ifeq ($(CONFIG_DEBUG_KOBJECT),y)
CFLAGS_kobject.o += -DDEBUG
diff --git a/lib/atomic64_test.c b/lib/atomic64_test.c
index fd70c0e..62ab629 100644
--- a/lib/atomic64_test.c
+++ b/lib/atomic64_test.c
@@ -153,8 +153,10 @@
long long v0 = 0xaaa31337c001d00dLL;
long long v1 = 0xdeadbeefdeafcafeLL;
long long v2 = 0xfaceabadf00df001LL;
+ long long v3 = 0x8000000000000000LL;
long long onestwos = 0x1111111122222222LL;
long long one = 1LL;
+ int r_int;
atomic64_t v = ATOMIC64_INIT(v0);
long long r = v0;
@@ -240,6 +242,11 @@
BUG_ON(!atomic64_inc_not_zero(&v));
r += one;
BUG_ON(v.counter != r);
+
+ /* Confirm the return value fits in an int, even if the value doesn't */
+ INIT(v3);
+ r_int = atomic64_inc_not_zero(&v);
+ BUG_ON(!r_int);
}
static __init int test_atomics_init(void)
diff --git a/lib/fault-inject.c b/lib/fault-inject.c
index 4ff1571..7d315fd 100644
--- a/lib/fault-inject.c
+++ b/lib/fault-inject.c
@@ -107,6 +107,15 @@
bool should_fail(struct fault_attr *attr, ssize_t size)
{
+ if (in_task()) {
+ unsigned int fail_nth = READ_ONCE(current->fail_nth);
+
+ if (fail_nth && !WRITE_ONCE(current->fail_nth, fail_nth - 1))
+ goto fail;
+
+ return false;
+ }
+
/* No need to check any other properties if the probability is 0 */
if (attr->probability == 0)
return false;
@@ -134,6 +143,7 @@
if (!fail_stacktrace(attr))
return false;
+fail:
fail_dump(attr);
if (atomic_read(&attr->times) != -1)
diff --git a/lib/percpu_counter.c b/lib/percpu_counter.c
index 8ee7e5e..3bf4a99 100644
--- a/lib/percpu_counter.c
+++ b/lib/percpu_counter.c
@@ -72,6 +72,13 @@
}
EXPORT_SYMBOL(percpu_counter_set);
+/**
+ * This function is both preempt and irq safe. The former is due to explicit
+ * preemption disable. The latter is guaranteed by the fact that the slow path
+ * is explicitly protected by an irq-safe spinlock whereas the fast patch uses
+ * this_cpu_add which is irq-safe by definition. Hence there is no need muck
+ * with irq state before calling this one
+ */
void percpu_counter_add_batch(struct percpu_counter *fbc, s64 amount, s32 batch)
{
s64 count;
diff --git a/lib/rhashtable.c b/lib/rhashtable.c
index 42466c1..707ca5d 100644
--- a/lib/rhashtable.c
+++ b/lib/rhashtable.c
@@ -234,7 +234,7 @@
INIT_LIST_HEAD(&tbl->walkers);
- get_random_bytes(&tbl->hash_rnd, sizeof(tbl->hash_rnd));
+ tbl->hash_rnd = get_random_u32();
for (i = 0; i < nbuckets; i++)
INIT_RHT_NULLS_HEAD(tbl->buckets[i], ht, i);
diff --git a/lib/string.c b/lib/string.c
index 1c1fc91..ebbb99c 100644
--- a/lib/string.c
+++ b/lib/string.c
@@ -978,3 +978,10 @@
return s;
}
EXPORT_SYMBOL(strreplace);
+
+void fortify_panic(const char *name)
+{
+ pr_emerg("detected buffer overflow in %s\n", name);
+ BUG();
+}
+EXPORT_SYMBOL(fortify_panic);
diff --git a/lib/test_kmod.c b/lib/test_kmod.c
new file mode 100644
index 0000000..6c1d678
--- /dev/null
+++ b/lib/test_kmod.c
@@ -0,0 +1,1246 @@
+/*
+ * kmod stress test driver
+ *
+ * Copyright (C) 2017 Luis R. Rodriguez <mcgrof@kernel.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or at your option any
+ * later version; or, when distributed separately from the Linux kernel or
+ * when incorporated into other software packages, subject to the following
+ * license:
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of copyleft-next (version 0.3.1 or later) as published
+ * at http://copyleft-next.org/.
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+/*
+ * This driver provides an interface to trigger and test the kernel's
+ * module loader through a series of configurations and a few triggers.
+ * To test this driver use the following script as root:
+ *
+ * tools/testing/selftests/kmod/kmod.sh --help
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/printk.h>
+#include <linux/kthread.h>
+#include <linux/sched.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <linux/vmalloc.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+
+#define TEST_START_NUM_THREADS 50
+#define TEST_START_DRIVER "test_module"
+#define TEST_START_TEST_FS "xfs"
+#define TEST_START_TEST_CASE TEST_KMOD_DRIVER
+
+
+static bool force_init_test = false;
+module_param(force_init_test, bool_enable_only, 0644);
+MODULE_PARM_DESC(force_init_test,
+ "Force kicking a test immediately after driver loads");
+
+/*
+ * For device allocation / registration
+ */
+static DEFINE_MUTEX(reg_dev_mutex);
+static LIST_HEAD(reg_test_devs);
+
+/*
+ * num_test_devs actually represents the *next* ID of the next
+ * device we will allow to create.
+ */
+static int num_test_devs;
+
+/**
+ * enum kmod_test_case - linker table test case
+ *
+ * If you add a test case, please be sure to review if you need to se
+ * @need_mod_put for your tests case.
+ *
+ * @TEST_KMOD_DRIVER: stress tests request_module()
+ * @TEST_KMOD_FS_TYPE: stress tests get_fs_type()
+ */
+enum kmod_test_case {
+ __TEST_KMOD_INVALID = 0,
+
+ TEST_KMOD_DRIVER,
+ TEST_KMOD_FS_TYPE,
+
+ __TEST_KMOD_MAX,
+};
+
+struct test_config {
+ char *test_driver;
+ char *test_fs;
+ unsigned int num_threads;
+ enum kmod_test_case test_case;
+ int test_result;
+};
+
+struct kmod_test_device;
+
+/**
+ * kmod_test_device_info - thread info
+ *
+ * @ret_sync: return value if request_module() is used, sync request for
+ * @TEST_KMOD_DRIVER
+ * @fs_sync: return value of get_fs_type() for @TEST_KMOD_FS_TYPE
+ * @thread_idx: thread ID
+ * @test_dev: test device test is being performed under
+ * @need_mod_put: Some tests (get_fs_type() is one) requires putting the module
+ * (module_put(fs_sync->owner)) when done, otherwise you will not be able
+ * to unload the respective modules and re-test. We use this to keep
+ * accounting of when we need this and to help out in case we need to
+ * error out and deal with module_put() on error.
+ */
+struct kmod_test_device_info {
+ int ret_sync;
+ struct file_system_type *fs_sync;
+ struct task_struct *task_sync;
+ unsigned int thread_idx;
+ struct kmod_test_device *test_dev;
+ bool need_mod_put;
+};
+
+/**
+ * kmod_test_device - test device to help test kmod
+ *
+ * @dev_idx: unique ID for test device
+ * @config: configuration for the test
+ * @misc_dev: we use a misc device under the hood
+ * @dev: pointer to misc_dev's own struct device
+ * @config_mutex: protects configuration of test
+ * @trigger_mutex: the test trigger can only be fired once at a time
+ * @thread_lock: protects @done count, and the @info per each thread
+ * @done: number of threads which have completed or failed
+ * @test_is_oom: when we run out of memory, use this to halt moving forward
+ * @kthreads_done: completion used to signal when all work is done
+ * @list: needed to be part of the reg_test_devs
+ * @info: array of info for each thread
+ */
+struct kmod_test_device {
+ int dev_idx;
+ struct test_config config;
+ struct miscdevice misc_dev;
+ struct device *dev;
+ struct mutex config_mutex;
+ struct mutex trigger_mutex;
+ struct mutex thread_mutex;
+
+ unsigned int done;
+
+ bool test_is_oom;
+ struct completion kthreads_done;
+ struct list_head list;
+
+ struct kmod_test_device_info *info;
+};
+
+static const char *test_case_str(enum kmod_test_case test_case)
+{
+ switch (test_case) {
+ case TEST_KMOD_DRIVER:
+ return "TEST_KMOD_DRIVER";
+ case TEST_KMOD_FS_TYPE:
+ return "TEST_KMOD_FS_TYPE";
+ default:
+ return "invalid";
+ }
+}
+
+static struct miscdevice *dev_to_misc_dev(struct device *dev)
+{
+ return dev_get_drvdata(dev);
+}
+
+static struct kmod_test_device *misc_dev_to_test_dev(struct miscdevice *misc_dev)
+{
+ return container_of(misc_dev, struct kmod_test_device, misc_dev);
+}
+
+static struct kmod_test_device *dev_to_test_dev(struct device *dev)
+{
+ struct miscdevice *misc_dev;
+
+ misc_dev = dev_to_misc_dev(dev);
+
+ return misc_dev_to_test_dev(misc_dev);
+}
+
+/* Must run with thread_mutex held */
+static void kmod_test_done_check(struct kmod_test_device *test_dev,
+ unsigned int idx)
+{
+ struct test_config *config = &test_dev->config;
+
+ test_dev->done++;
+ dev_dbg(test_dev->dev, "Done thread count: %u\n", test_dev->done);
+
+ if (test_dev->done == config->num_threads) {
+ dev_info(test_dev->dev, "Done: %u threads have all run now\n",
+ test_dev->done);
+ dev_info(test_dev->dev, "Last thread to run: %u\n", idx);
+ complete(&test_dev->kthreads_done);
+ }
+}
+
+static void test_kmod_put_module(struct kmod_test_device_info *info)
+{
+ struct kmod_test_device *test_dev = info->test_dev;
+ struct test_config *config = &test_dev->config;
+
+ if (!info->need_mod_put)
+ return;
+
+ switch (config->test_case) {
+ case TEST_KMOD_DRIVER:
+ break;
+ case TEST_KMOD_FS_TYPE:
+ if (info && info->fs_sync && info->fs_sync->owner)
+ module_put(info->fs_sync->owner);
+ break;
+ default:
+ BUG();
+ }
+
+ info->need_mod_put = true;
+}
+
+static int run_request(void *data)
+{
+ struct kmod_test_device_info *info = data;
+ struct kmod_test_device *test_dev = info->test_dev;
+ struct test_config *config = &test_dev->config;
+
+ switch (config->test_case) {
+ case TEST_KMOD_DRIVER:
+ info->ret_sync = request_module("%s", config->test_driver);
+ break;
+ case TEST_KMOD_FS_TYPE:
+ info->fs_sync = get_fs_type(config->test_fs);
+ info->need_mod_put = true;
+ break;
+ default:
+ /* __trigger_config_run() already checked for test sanity */
+ BUG();
+ return -EINVAL;
+ }
+
+ dev_dbg(test_dev->dev, "Ran thread %u\n", info->thread_idx);
+
+ test_kmod_put_module(info);
+
+ mutex_lock(&test_dev->thread_mutex);
+ info->task_sync = NULL;
+ kmod_test_done_check(test_dev, info->thread_idx);
+ mutex_unlock(&test_dev->thread_mutex);
+
+ return 0;
+}
+
+static int tally_work_test(struct kmod_test_device_info *info)
+{
+ struct kmod_test_device *test_dev = info->test_dev;
+ struct test_config *config = &test_dev->config;
+ int err_ret = 0;
+
+ switch (config->test_case) {
+ case TEST_KMOD_DRIVER:
+ /*
+ * Only capture errors, if one is found that's
+ * enough, for now.
+ */
+ if (info->ret_sync != 0)
+ err_ret = info->ret_sync;
+ dev_info(test_dev->dev,
+ "Sync thread %d return status: %d\n",
+ info->thread_idx, info->ret_sync);
+ break;
+ case TEST_KMOD_FS_TYPE:
+ /* For now we make this simple */
+ if (!info->fs_sync)
+ err_ret = -EINVAL;
+ dev_info(test_dev->dev, "Sync thread %u fs: %s\n",
+ info->thread_idx, info->fs_sync ? config->test_fs :
+ "NULL");
+ break;
+ default:
+ BUG();
+ }
+
+ return err_ret;
+}
+
+/*
+ * XXX: add result option to display if all errors did not match.
+ * For now we just keep any error code if one was found.
+ *
+ * If this ran it means *all* tasks were created fine and we
+ * are now just collecting results.
+ *
+ * Only propagate errors, do not override with a subsequent sucess case.
+ */
+static void tally_up_work(struct kmod_test_device *test_dev)
+{
+ struct test_config *config = &test_dev->config;
+ struct kmod_test_device_info *info;
+ unsigned int idx;
+ int err_ret = 0;
+ int ret = 0;
+
+ mutex_lock(&test_dev->thread_mutex);
+
+ dev_info(test_dev->dev, "Results:\n");
+
+ for (idx=0; idx < config->num_threads; idx++) {
+ info = &test_dev->info[idx];
+ ret = tally_work_test(info);
+ if (ret)
+ err_ret = ret;
+ }
+
+ /*
+ * Note: request_module() returns 256 for a module not found even
+ * though modprobe itself returns 1.
+ */
+ config->test_result = err_ret;
+
+ mutex_unlock(&test_dev->thread_mutex);
+}
+
+static int try_one_request(struct kmod_test_device *test_dev, unsigned int idx)
+{
+ struct kmod_test_device_info *info = &test_dev->info[idx];
+ int fail_ret = -ENOMEM;
+
+ mutex_lock(&test_dev->thread_mutex);
+
+ info->thread_idx = idx;
+ info->test_dev = test_dev;
+ info->task_sync = kthread_run(run_request, info, "%s-%u",
+ KBUILD_MODNAME, idx);
+
+ if (!info->task_sync || IS_ERR(info->task_sync)) {
+ test_dev->test_is_oom = true;
+ dev_err(test_dev->dev, "Setting up thread %u failed\n", idx);
+ info->task_sync = NULL;
+ goto err_out;
+ } else
+ dev_dbg(test_dev->dev, "Kicked off thread %u\n", idx);
+
+ mutex_unlock(&test_dev->thread_mutex);
+
+ return 0;
+
+err_out:
+ info->ret_sync = fail_ret;
+ mutex_unlock(&test_dev->thread_mutex);
+
+ return fail_ret;
+}
+
+static void test_dev_kmod_stop_tests(struct kmod_test_device *test_dev)
+{
+ struct test_config *config = &test_dev->config;
+ struct kmod_test_device_info *info;
+ unsigned int i;
+
+ dev_info(test_dev->dev, "Ending request_module() tests\n");
+
+ mutex_lock(&test_dev->thread_mutex);
+
+ for (i=0; i < config->num_threads; i++) {
+ info = &test_dev->info[i];
+ if (info->task_sync && !IS_ERR(info->task_sync)) {
+ dev_info(test_dev->dev,
+ "Stopping still-running thread %i\n", i);
+ kthread_stop(info->task_sync);
+ }
+
+ /*
+ * info->task_sync is well protected, it can only be
+ * NULL or a pointer to a struct. If its NULL we either
+ * never ran, or we did and we completed the work. Completed
+ * tasks *always* put the module for us. This is a sanity
+ * check -- just in case.
+ */
+ if (info->task_sync && info->need_mod_put)
+ test_kmod_put_module(info);
+ }
+
+ mutex_unlock(&test_dev->thread_mutex);
+}
+
+/*
+ * Only wait *iff* we did not run into any errors during all of our thread
+ * set up. If run into any issues we stop threads and just bail out with
+ * an error to the trigger. This also means we don't need any tally work
+ * for any threads which fail.
+ */
+static int try_requests(struct kmod_test_device *test_dev)
+{
+ struct test_config *config = &test_dev->config;
+ unsigned int idx;
+ int ret;
+ bool any_error = false;
+
+ for (idx=0; idx < config->num_threads; idx++) {
+ if (test_dev->test_is_oom) {
+ any_error = true;
+ break;
+ }
+
+ ret = try_one_request(test_dev, idx);
+ if (ret) {
+ any_error = true;
+ break;
+ }
+ }
+
+ if (!any_error) {
+ test_dev->test_is_oom = false;
+ dev_info(test_dev->dev,
+ "No errors were found while initializing threads\n");
+ wait_for_completion(&test_dev->kthreads_done);
+ tally_up_work(test_dev);
+ } else {
+ test_dev->test_is_oom = true;
+ dev_info(test_dev->dev,
+ "At least one thread failed to start, stop all work\n");
+ test_dev_kmod_stop_tests(test_dev);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static int run_test_driver(struct kmod_test_device *test_dev)
+{
+ struct test_config *config = &test_dev->config;
+
+ dev_info(test_dev->dev, "Test case: %s (%u)\n",
+ test_case_str(config->test_case),
+ config->test_case);
+ dev_info(test_dev->dev, "Test driver to load: %s\n",
+ config->test_driver);
+ dev_info(test_dev->dev, "Number of threads to run: %u\n",
+ config->num_threads);
+ dev_info(test_dev->dev, "Thread IDs will range from 0 - %u\n",
+ config->num_threads - 1);
+
+ return try_requests(test_dev);
+}
+
+static int run_test_fs_type(struct kmod_test_device *test_dev)
+{
+ struct test_config *config = &test_dev->config;
+
+ dev_info(test_dev->dev, "Test case: %s (%u)\n",
+ test_case_str(config->test_case),
+ config->test_case);
+ dev_info(test_dev->dev, "Test filesystem to load: %s\n",
+ config->test_fs);
+ dev_info(test_dev->dev, "Number of threads to run: %u\n",
+ config->num_threads);
+ dev_info(test_dev->dev, "Thread IDs will range from 0 - %u\n",
+ config->num_threads - 1);
+
+ return try_requests(test_dev);
+}
+
+static ssize_t config_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct kmod_test_device *test_dev = dev_to_test_dev(dev);
+ struct test_config *config = &test_dev->config;
+ int len = 0;
+
+ mutex_lock(&test_dev->config_mutex);
+
+ len += snprintf(buf, PAGE_SIZE,
+ "Custom trigger configuration for: %s\n",
+ dev_name(dev));
+
+ len += snprintf(buf+len, PAGE_SIZE - len,
+ "Number of threads:\t%u\n",
+ config->num_threads);
+
+ len += snprintf(buf+len, PAGE_SIZE - len,
+ "Test_case:\t%s (%u)\n",
+ test_case_str(config->test_case),
+ config->test_case);
+
+ if (config->test_driver)
+ len += snprintf(buf+len, PAGE_SIZE - len,
+ "driver:\t%s\n",
+ config->test_driver);
+ else
+ len += snprintf(buf+len, PAGE_SIZE - len,
+ "driver:\tEMTPY\n");
+
+ if (config->test_fs)
+ len += snprintf(buf+len, PAGE_SIZE - len,
+ "fs:\t%s\n",
+ config->test_fs);
+ else
+ len += snprintf(buf+len, PAGE_SIZE - len,
+ "fs:\tEMTPY\n");
+
+ mutex_unlock(&test_dev->config_mutex);
+
+ return len;
+}
+static DEVICE_ATTR_RO(config);
+
+/*
+ * This ensures we don't allow kicking threads through if our configuration
+ * is faulty.
+ */
+static int __trigger_config_run(struct kmod_test_device *test_dev)
+{
+ struct test_config *config = &test_dev->config;
+
+ test_dev->done = 0;
+
+ switch (config->test_case) {
+ case TEST_KMOD_DRIVER:
+ return run_test_driver(test_dev);
+ case TEST_KMOD_FS_TYPE:
+ return run_test_fs_type(test_dev);
+ default:
+ dev_warn(test_dev->dev,
+ "Invalid test case requested: %u\n",
+ config->test_case);
+ return -EINVAL;
+ }
+}
+
+static int trigger_config_run(struct kmod_test_device *test_dev)
+{
+ struct test_config *config = &test_dev->config;
+ int ret;
+
+ mutex_lock(&test_dev->trigger_mutex);
+ mutex_lock(&test_dev->config_mutex);
+
+ ret = __trigger_config_run(test_dev);
+ if (ret < 0)
+ goto out;
+ dev_info(test_dev->dev, "General test result: %d\n",
+ config->test_result);
+
+ /*
+ * We must return 0 after a trigger even unless something went
+ * wrong with the setup of the test. If the test setup went fine
+ * then userspace must just check the result of config->test_result.
+ * One issue with relying on the return from a call in the kernel
+ * is if the kernel returns a possitive value using this trigger
+ * will not return the value to userspace, it would be lost.
+ *
+ * By not relying on capturing the return value of tests we are using
+ * through the trigger it also us to run tests with set -e and only
+ * fail when something went wrong with the driver upon trigger
+ * requests.
+ */
+ ret = 0;
+
+out:
+ mutex_unlock(&test_dev->config_mutex);
+ mutex_unlock(&test_dev->trigger_mutex);
+
+ return ret;
+}
+
+static ssize_t
+trigger_config_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct kmod_test_device *test_dev = dev_to_test_dev(dev);
+ int ret;
+
+ if (test_dev->test_is_oom)
+ return -ENOMEM;
+
+ /* For all intents and purposes we don't care what userspace
+ * sent this trigger, we care only that we were triggered.
+ * We treat the return value only for caputuring issues with
+ * the test setup. At this point all the test variables should
+ * have been allocated so typically this should never fail.
+ */
+ ret = trigger_config_run(test_dev);
+ if (unlikely(ret < 0))
+ goto out;
+
+ /*
+ * Note: any return > 0 will be treated as success
+ * and the error value will not be available to userspace.
+ * Do not rely on trying to send to userspace a test value
+ * return value as possitive return errors will be lost.
+ */
+ if (WARN_ON(ret > 0))
+ return -EINVAL;
+
+ ret = count;
+out:
+ return ret;
+}
+static DEVICE_ATTR_WO(trigger_config);
+
+/*
+ * XXX: move to kstrncpy() once merged.
+ *
+ * Users should use kfree_const() when freeing these.
+ */
+static int __kstrncpy(char **dst, const char *name, size_t count, gfp_t gfp)
+{
+ *dst = kstrndup(name, count, gfp);
+ if (!*dst)
+ return -ENOSPC;
+ return count;
+}
+
+static int config_copy_test_driver_name(struct test_config *config,
+ const char *name,
+ size_t count)
+{
+ return __kstrncpy(&config->test_driver, name, count, GFP_KERNEL);
+}
+
+
+static int config_copy_test_fs(struct test_config *config, const char *name,
+ size_t count)
+{
+ return __kstrncpy(&config->test_fs, name, count, GFP_KERNEL);
+}
+
+static void __kmod_config_free(struct test_config *config)
+{
+ if (!config)
+ return;
+
+ kfree_const(config->test_driver);
+ config->test_driver = NULL;
+
+ kfree_const(config->test_fs);
+ config->test_driver = NULL;
+}
+
+static void kmod_config_free(struct kmod_test_device *test_dev)
+{
+ struct test_config *config;
+
+ if (!test_dev)
+ return;
+
+ config = &test_dev->config;
+
+ mutex_lock(&test_dev->config_mutex);
+ __kmod_config_free(config);
+ mutex_unlock(&test_dev->config_mutex);
+}
+
+static ssize_t config_test_driver_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct kmod_test_device *test_dev = dev_to_test_dev(dev);
+ struct test_config *config = &test_dev->config;
+ int copied;
+
+ mutex_lock(&test_dev->config_mutex);
+
+ kfree_const(config->test_driver);
+ config->test_driver = NULL;
+
+ copied = config_copy_test_driver_name(config, buf, count);
+ mutex_unlock(&test_dev->config_mutex);
+
+ return copied;
+}
+
+/*
+ * As per sysfs_kf_seq_show() the buf is max PAGE_SIZE.
+ */
+static ssize_t config_test_show_str(struct mutex *config_mutex,
+ char *dst,
+ char *src)
+{
+ int len;
+
+ mutex_lock(config_mutex);
+ len = snprintf(dst, PAGE_SIZE, "%s\n", src);
+ mutex_unlock(config_mutex);
+
+ return len;
+}
+
+static ssize_t config_test_driver_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct kmod_test_device *test_dev = dev_to_test_dev(dev);
+ struct test_config *config = &test_dev->config;
+
+ return config_test_show_str(&test_dev->config_mutex, buf,
+ config->test_driver);
+}
+static DEVICE_ATTR(config_test_driver, 0644, config_test_driver_show,
+ config_test_driver_store);
+
+static ssize_t config_test_fs_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct kmod_test_device *test_dev = dev_to_test_dev(dev);
+ struct test_config *config = &test_dev->config;
+ int copied;
+
+ mutex_lock(&test_dev->config_mutex);
+
+ kfree_const(config->test_fs);
+ config->test_fs = NULL;
+
+ copied = config_copy_test_fs(config, buf, count);
+ mutex_unlock(&test_dev->config_mutex);
+
+ return copied;
+}
+
+static ssize_t config_test_fs_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct kmod_test_device *test_dev = dev_to_test_dev(dev);
+ struct test_config *config = &test_dev->config;
+
+ return config_test_show_str(&test_dev->config_mutex, buf,
+ config->test_fs);
+}
+static DEVICE_ATTR(config_test_fs, 0644, config_test_fs_show,
+ config_test_fs_store);
+
+static int trigger_config_run_type(struct kmod_test_device *test_dev,
+ enum kmod_test_case test_case,
+ const char *test_str)
+{
+ int copied = 0;
+ struct test_config *config = &test_dev->config;
+
+ mutex_lock(&test_dev->config_mutex);
+
+ switch (test_case) {
+ case TEST_KMOD_DRIVER:
+ kfree_const(config->test_driver);
+ config->test_driver = NULL;
+ copied = config_copy_test_driver_name(config, test_str,
+ strlen(test_str));
+ break;
+ case TEST_KMOD_FS_TYPE:
+ break;
+ kfree_const(config->test_fs);
+ config->test_driver = NULL;
+ copied = config_copy_test_fs(config, test_str,
+ strlen(test_str));
+ default:
+ mutex_unlock(&test_dev->config_mutex);
+ return -EINVAL;
+ }
+
+ config->test_case = test_case;
+
+ mutex_unlock(&test_dev->config_mutex);
+
+ if (copied <= 0 || copied != strlen(test_str)) {
+ test_dev->test_is_oom = true;
+ return -ENOMEM;
+ }
+
+ test_dev->test_is_oom = false;
+
+ return trigger_config_run(test_dev);
+}
+
+static void free_test_dev_info(struct kmod_test_device *test_dev)
+{
+ vfree(test_dev->info);
+ test_dev->info = NULL;
+}
+
+static int kmod_config_sync_info(struct kmod_test_device *test_dev)
+{
+ struct test_config *config = &test_dev->config;
+
+ free_test_dev_info(test_dev);
+ test_dev->info = vzalloc(config->num_threads *
+ sizeof(struct kmod_test_device_info));
+ if (!test_dev->info) {
+ dev_err(test_dev->dev, "Cannot alloc test_dev info\n");
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+/*
+ * Old kernels may not have this, if you want to port this code to
+ * test it on older kernels.
+ */
+#ifdef get_kmod_umh_limit
+static unsigned int kmod_init_test_thread_limit(void)
+{
+ return get_kmod_umh_limit();
+}
+#else
+static unsigned int kmod_init_test_thread_limit(void)
+{
+ return TEST_START_NUM_THREADS;
+}
+#endif
+
+static int __kmod_config_init(struct kmod_test_device *test_dev)
+{
+ struct test_config *config = &test_dev->config;
+ int ret = -ENOMEM, copied;
+
+ __kmod_config_free(config);
+
+ copied = config_copy_test_driver_name(config, TEST_START_DRIVER,
+ strlen(TEST_START_DRIVER));
+ if (copied != strlen(TEST_START_DRIVER))
+ goto err_out;
+
+ copied = config_copy_test_fs(config, TEST_START_TEST_FS,
+ strlen(TEST_START_TEST_FS));
+ if (copied != strlen(TEST_START_TEST_FS))
+ goto err_out;
+
+ config->num_threads = kmod_init_test_thread_limit();
+ config->test_result = 0;
+ config->test_case = TEST_START_TEST_CASE;
+
+ ret = kmod_config_sync_info(test_dev);
+ if (ret)
+ goto err_out;
+
+ test_dev->test_is_oom = false;
+
+ return 0;
+
+err_out:
+ test_dev->test_is_oom = true;
+ WARN_ON(test_dev->test_is_oom);
+
+ __kmod_config_free(config);
+
+ return ret;
+}
+
+static ssize_t reset_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct kmod_test_device *test_dev = dev_to_test_dev(dev);
+ int ret;
+
+ mutex_lock(&test_dev->trigger_mutex);
+ mutex_lock(&test_dev->config_mutex);
+
+ ret = __kmod_config_init(test_dev);
+ if (ret < 0) {
+ ret = -ENOMEM;
+ dev_err(dev, "could not alloc settings for config trigger: %d\n",
+ ret);
+ goto out;
+ }
+
+ dev_info(dev, "reset\n");
+ ret = count;
+
+out:
+ mutex_unlock(&test_dev->config_mutex);
+ mutex_unlock(&test_dev->trigger_mutex);
+
+ return ret;
+}
+static DEVICE_ATTR_WO(reset);
+
+static int test_dev_config_update_uint_sync(struct kmod_test_device *test_dev,
+ const char *buf, size_t size,
+ unsigned int *config,
+ int (*test_sync)(struct kmod_test_device *test_dev))
+{
+ int ret;
+ long new;
+ unsigned int old_val;
+
+ ret = kstrtol(buf, 10, &new);
+ if (ret)
+ return ret;
+
+ if (new > UINT_MAX)
+ return -EINVAL;
+
+ mutex_lock(&test_dev->config_mutex);
+
+ old_val = *config;
+ *(unsigned int *)config = new;
+
+ ret = test_sync(test_dev);
+ if (ret) {
+ *(unsigned int *)config = old_val;
+
+ ret = test_sync(test_dev);
+ WARN_ON(ret);
+
+ mutex_unlock(&test_dev->config_mutex);
+ return -EINVAL;
+ }
+
+ mutex_unlock(&test_dev->config_mutex);
+ /* Always return full write size even if we didn't consume all */
+ return size;
+}
+
+static int test_dev_config_update_uint_range(struct kmod_test_device *test_dev,
+ const char *buf, size_t size,
+ unsigned int *config,
+ unsigned int min,
+ unsigned int max)
+{
+ int ret;
+ long new;
+
+ ret = kstrtol(buf, 10, &new);
+ if (ret)
+ return ret;
+
+ if (new < min || new > max || new > UINT_MAX)
+ return -EINVAL;
+
+ mutex_lock(&test_dev->config_mutex);
+ *config = new;
+ mutex_unlock(&test_dev->config_mutex);
+
+ /* Always return full write size even if we didn't consume all */
+ return size;
+}
+
+static int test_dev_config_update_int(struct kmod_test_device *test_dev,
+ const char *buf, size_t size,
+ int *config)
+{
+ int ret;
+ long new;
+
+ ret = kstrtol(buf, 10, &new);
+ if (ret)
+ return ret;
+
+ if (new > INT_MAX || new < INT_MIN)
+ return -EINVAL;
+
+ mutex_lock(&test_dev->config_mutex);
+ *config = new;
+ mutex_unlock(&test_dev->config_mutex);
+ /* Always return full write size even if we didn't consume all */
+ return size;
+}
+
+static ssize_t test_dev_config_show_int(struct kmod_test_device *test_dev,
+ char *buf,
+ int config)
+{
+ int val;
+
+ mutex_lock(&test_dev->config_mutex);
+ val = config;
+ mutex_unlock(&test_dev->config_mutex);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", val);
+}
+
+static ssize_t test_dev_config_show_uint(struct kmod_test_device *test_dev,
+ char *buf,
+ unsigned int config)
+{
+ unsigned int val;
+
+ mutex_lock(&test_dev->config_mutex);
+ val = config;
+ mutex_unlock(&test_dev->config_mutex);
+
+ return snprintf(buf, PAGE_SIZE, "%u\n", val);
+}
+
+static ssize_t test_result_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct kmod_test_device *test_dev = dev_to_test_dev(dev);
+ struct test_config *config = &test_dev->config;
+
+ return test_dev_config_update_int(test_dev, buf, count,
+ &config->test_result);
+}
+
+static ssize_t config_num_threads_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct kmod_test_device *test_dev = dev_to_test_dev(dev);
+ struct test_config *config = &test_dev->config;
+
+ return test_dev_config_update_uint_sync(test_dev, buf, count,
+ &config->num_threads,
+ kmod_config_sync_info);
+}
+
+static ssize_t config_num_threads_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct kmod_test_device *test_dev = dev_to_test_dev(dev);
+ struct test_config *config = &test_dev->config;
+
+ return test_dev_config_show_int(test_dev, buf, config->num_threads);
+}
+static DEVICE_ATTR(config_num_threads, 0644, config_num_threads_show,
+ config_num_threads_store);
+
+static ssize_t config_test_case_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct kmod_test_device *test_dev = dev_to_test_dev(dev);
+ struct test_config *config = &test_dev->config;
+
+ return test_dev_config_update_uint_range(test_dev, buf, count,
+ &config->test_case,
+ __TEST_KMOD_INVALID + 1,
+ __TEST_KMOD_MAX - 1);
+}
+
+static ssize_t config_test_case_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct kmod_test_device *test_dev = dev_to_test_dev(dev);
+ struct test_config *config = &test_dev->config;
+
+ return test_dev_config_show_uint(test_dev, buf, config->test_case);
+}
+static DEVICE_ATTR(config_test_case, 0644, config_test_case_show,
+ config_test_case_store);
+
+static ssize_t test_result_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct kmod_test_device *test_dev = dev_to_test_dev(dev);
+ struct test_config *config = &test_dev->config;
+
+ return test_dev_config_show_int(test_dev, buf, config->test_result);
+}
+static DEVICE_ATTR(test_result, 0644, test_result_show, test_result_store);
+
+#define TEST_KMOD_DEV_ATTR(name) &dev_attr_##name.attr
+
+static struct attribute *test_dev_attrs[] = {
+ TEST_KMOD_DEV_ATTR(trigger_config),
+ TEST_KMOD_DEV_ATTR(config),
+ TEST_KMOD_DEV_ATTR(reset),
+
+ TEST_KMOD_DEV_ATTR(config_test_driver),
+ TEST_KMOD_DEV_ATTR(config_test_fs),
+ TEST_KMOD_DEV_ATTR(config_num_threads),
+ TEST_KMOD_DEV_ATTR(config_test_case),
+ TEST_KMOD_DEV_ATTR(test_result),
+
+ NULL,
+};
+
+ATTRIBUTE_GROUPS(test_dev);
+
+static int kmod_config_init(struct kmod_test_device *test_dev)
+{
+ int ret;
+
+ mutex_lock(&test_dev->config_mutex);
+ ret = __kmod_config_init(test_dev);
+ mutex_unlock(&test_dev->config_mutex);
+
+ return ret;
+}
+
+static struct kmod_test_device *alloc_test_dev_kmod(int idx)
+{
+ int ret;
+ struct kmod_test_device *test_dev;
+ struct miscdevice *misc_dev;
+
+ test_dev = vzalloc(sizeof(struct kmod_test_device));
+ if (!test_dev) {
+ pr_err("Cannot alloc test_dev\n");
+ goto err_out;
+ }
+
+ mutex_init(&test_dev->config_mutex);
+ mutex_init(&test_dev->trigger_mutex);
+ mutex_init(&test_dev->thread_mutex);
+
+ init_completion(&test_dev->kthreads_done);
+
+ ret = kmod_config_init(test_dev);
+ if (ret < 0) {
+ pr_err("Cannot alloc kmod_config_init()\n");
+ goto err_out_free;
+ }
+
+ test_dev->dev_idx = idx;
+ misc_dev = &test_dev->misc_dev;
+
+ misc_dev->minor = MISC_DYNAMIC_MINOR;
+ misc_dev->name = kasprintf(GFP_KERNEL, "test_kmod%d", idx);
+ if (!misc_dev->name) {
+ pr_err("Cannot alloc misc_dev->name\n");
+ goto err_out_free_config;
+ }
+ misc_dev->groups = test_dev_groups;
+
+ return test_dev;
+
+err_out_free_config:
+ free_test_dev_info(test_dev);
+ kmod_config_free(test_dev);
+err_out_free:
+ vfree(test_dev);
+ test_dev = NULL;
+err_out:
+ return NULL;
+}
+
+static void free_test_dev_kmod(struct kmod_test_device *test_dev)
+{
+ if (test_dev) {
+ kfree_const(test_dev->misc_dev.name);
+ test_dev->misc_dev.name = NULL;
+ free_test_dev_info(test_dev);
+ kmod_config_free(test_dev);
+ vfree(test_dev);
+ test_dev = NULL;
+ }
+}
+
+static struct kmod_test_device *register_test_dev_kmod(void)
+{
+ struct kmod_test_device *test_dev = NULL;
+ int ret;
+
+ mutex_unlock(®_dev_mutex);
+
+ /* int should suffice for number of devices, test for wrap */
+ if (unlikely(num_test_devs + 1) < 0) {
+ pr_err("reached limit of number of test devices\n");
+ goto out;
+ }
+
+ test_dev = alloc_test_dev_kmod(num_test_devs);
+ if (!test_dev)
+ goto out;
+
+ ret = misc_register(&test_dev->misc_dev);
+ if (ret) {
+ pr_err("could not register misc device: %d\n", ret);
+ free_test_dev_kmod(test_dev);
+ goto out;
+ }
+
+ test_dev->dev = test_dev->misc_dev.this_device;
+ list_add_tail(&test_dev->list, ®_test_devs);
+ dev_info(test_dev->dev, "interface ready\n");
+
+ num_test_devs++;
+
+out:
+ mutex_unlock(®_dev_mutex);
+
+ return test_dev;
+
+}
+
+static int __init test_kmod_init(void)
+{
+ struct kmod_test_device *test_dev;
+ int ret;
+
+ test_dev = register_test_dev_kmod();
+ if (!test_dev) {
+ pr_err("Cannot add first test kmod device\n");
+ return -ENODEV;
+ }
+
+ /*
+ * With some work we might be able to gracefully enable
+ * testing with this driver built-in, for now this seems
+ * rather risky. For those willing to try have at it,
+ * and enable the below. Good luck! If that works, try
+ * lowering the init level for more fun.
+ */
+ if (force_init_test) {
+ ret = trigger_config_run_type(test_dev,
+ TEST_KMOD_DRIVER, "tun");
+ if (WARN_ON(ret))
+ return ret;
+ ret = trigger_config_run_type(test_dev,
+ TEST_KMOD_FS_TYPE, "btrfs");
+ if (WARN_ON(ret))
+ return ret;
+ }
+
+ return 0;
+}
+late_initcall(test_kmod_init);
+
+static
+void unregister_test_dev_kmod(struct kmod_test_device *test_dev)
+{
+ mutex_lock(&test_dev->trigger_mutex);
+ mutex_lock(&test_dev->config_mutex);
+
+ test_dev_kmod_stop_tests(test_dev);
+
+ dev_info(test_dev->dev, "removing interface\n");
+ misc_deregister(&test_dev->misc_dev);
+ kfree(&test_dev->misc_dev.name);
+
+ mutex_unlock(&test_dev->config_mutex);
+ mutex_unlock(&test_dev->trigger_mutex);
+
+ free_test_dev_kmod(test_dev);
+}
+
+static void __exit test_kmod_exit(void)
+{
+ struct kmod_test_device *test_dev, *tmp;
+
+ mutex_lock(®_dev_mutex);
+ list_for_each_entry_safe(test_dev, tmp, ®_test_devs, list) {
+ list_del(&test_dev->list);
+ unregister_test_dev_kmod(test_dev);
+ }
+ mutex_unlock(®_dev_mutex);
+}
+module_exit(test_kmod_exit);
+
+MODULE_AUTHOR("Luis R. Rodriguez <mcgrof@kernel.org>");
+MODULE_LICENSE("GPL");
diff --git a/lib/test_rhashtable.c b/lib/test_rhashtable.c
index 64e899b..0ffca99 100644
--- a/lib/test_rhashtable.c
+++ b/lib/test_rhashtable.c
@@ -56,8 +56,13 @@
module_param(enomem_retry, bool, 0);
MODULE_PARM_DESC(enomem_retry, "Retry insert even if -ENOMEM was returned (default: off)");
+struct test_obj_val {
+ int id;
+ int tid;
+};
+
struct test_obj {
- int value;
+ struct test_obj_val value;
struct rhash_head node;
};
@@ -72,7 +77,7 @@
static struct rhashtable_params test_rht_params = {
.head_offset = offsetof(struct test_obj, node),
.key_offset = offsetof(struct test_obj, value),
- .key_len = sizeof(int),
+ .key_len = sizeof(struct test_obj_val),
.hashfn = jhash,
.nulls_base = (3U << RHT_BASE_SHIFT),
};
@@ -109,24 +114,26 @@
for (i = 0; i < entries * 2; i++) {
struct test_obj *obj;
bool expected = !(i % 2);
- u32 key = i;
+ struct test_obj_val key = {
+ .id = i,
+ };
- if (array[i / 2].value == TEST_INSERT_FAIL)
+ if (array[i / 2].value.id == TEST_INSERT_FAIL)
expected = false;
obj = rhashtable_lookup_fast(ht, &key, test_rht_params);
if (expected && !obj) {
- pr_warn("Test failed: Could not find key %u\n", key);
+ pr_warn("Test failed: Could not find key %u\n", key.id);
return -ENOENT;
} else if (!expected && obj) {
pr_warn("Test failed: Unexpected entry found for key %u\n",
- key);
+ key.id);
return -EEXIST;
} else if (expected && obj) {
- if (obj->value != i) {
+ if (obj->value.id != i) {
pr_warn("Test failed: Lookup value mismatch %u!=%u\n",
- obj->value, i);
+ obj->value.id, i);
return -EINVAL;
}
}
@@ -195,7 +202,7 @@
for (i = 0; i < entries; i++) {
struct test_obj *obj = &array[i];
- obj->value = i * 2;
+ obj->value.id = i * 2;
err = insert_retry(ht, &obj->node, test_rht_params);
if (err > 0)
insert_retries += err;
@@ -216,9 +223,11 @@
pr_info(" Deleting %d keys\n", entries);
for (i = 0; i < entries; i++) {
- u32 key = i * 2;
+ struct test_obj_val key = {
+ .id = i * 2,
+ };
- if (array[i].value != TEST_INSERT_FAIL) {
+ if (array[i].value.id != TEST_INSERT_FAIL) {
obj = rhashtable_lookup_fast(ht, &key, test_rht_params);
BUG_ON(!obj);
@@ -242,18 +251,21 @@
for (i = 0; i < entries; i++) {
struct test_obj *obj;
- int key = (tdata->id << 16) | i;
+ struct test_obj_val key = {
+ .id = i,
+ .tid = tdata->id,
+ };
obj = rhashtable_lookup_fast(&ht, &key, test_rht_params);
- if (obj && (tdata->objs[i].value == TEST_INSERT_FAIL)) {
- pr_err(" found unexpected object %d\n", key);
+ if (obj && (tdata->objs[i].value.id == TEST_INSERT_FAIL)) {
+ pr_err(" found unexpected object %d-%d\n", key.tid, key.id);
err++;
- } else if (!obj && (tdata->objs[i].value != TEST_INSERT_FAIL)) {
- pr_err(" object %d not found!\n", key);
+ } else if (!obj && (tdata->objs[i].value.id != TEST_INSERT_FAIL)) {
+ pr_err(" object %d-%d not found!\n", key.tid, key.id);
err++;
- } else if (obj && (obj->value != key)) {
- pr_err(" wrong object returned (got %d, expected %d)\n",
- obj->value, key);
+ } else if (obj && memcmp(&obj->value, &key, sizeof(key))) {
+ pr_err(" wrong object returned (got %d-%d, expected %d-%d)\n",
+ obj->value.tid, obj->value.id, key.tid, key.id);
err++;
}
@@ -272,7 +284,8 @@
pr_err(" thread[%d]: down_interruptible failed\n", tdata->id);
for (i = 0; i < entries; i++) {
- tdata->objs[i].value = (tdata->id << 16) | i;
+ tdata->objs[i].value.id = i;
+ tdata->objs[i].value.tid = tdata->id;
err = insert_retry(&ht, &tdata->objs[i].node, test_rht_params);
if (err > 0) {
insert_retries += err;
@@ -295,7 +308,7 @@
for (step = 10; step > 0; step--) {
for (i = 0; i < entries; i += step) {
- if (tdata->objs[i].value == TEST_INSERT_FAIL)
+ if (tdata->objs[i].value.id == TEST_INSERT_FAIL)
continue;
err = rhashtable_remove_fast(&ht, &tdata->objs[i].node,
test_rht_params);
@@ -304,7 +317,7 @@
tdata->id);
goto out;
}
- tdata->objs[i].value = TEST_INSERT_FAIL;
+ tdata->objs[i].value.id = TEST_INSERT_FAIL;
cond_resched();
}
diff --git a/lib/test_sysctl.c b/lib/test_sysctl.c
new file mode 100644
index 0000000..3dd801c
--- /dev/null
+++ b/lib/test_sysctl.c
@@ -0,0 +1,148 @@
+/*
+ * proc sysctl test driver
+ *
+ * Copyright (C) 2017 Luis R. Rodriguez <mcgrof@kernel.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or at your option any
+ * later version; or, when distributed separately from the Linux kernel or
+ * when incorporated into other software packages, subject to the following
+ * license:
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of copyleft-next (version 0.3.1 or later) as published
+ * at http://copyleft-next.org/.
+ */
+
+/*
+ * This module provides an interface to the the proc sysctl interfaces. This
+ * driver requires CONFIG_PROC_SYSCTL. It will not normally be loaded by the
+ * system unless explicitly requested by name. You can also build this driver
+ * into your kernel.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/printk.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/async.h>
+#include <linux/delay.h>
+#include <linux/vmalloc.h>
+
+static int i_zero;
+static int i_one_hundred = 100;
+
+struct test_sysctl_data {
+ int int_0001;
+ int int_0002;
+ int int_0003[4];
+
+ unsigned int uint_0001;
+
+ char string_0001[65];
+};
+
+static struct test_sysctl_data test_data = {
+ .int_0001 = 60,
+ .int_0002 = 1,
+
+ .int_0003[0] = 0,
+ .int_0003[1] = 1,
+ .int_0003[2] = 2,
+ .int_0003[3] = 3,
+
+ .uint_0001 = 314,
+
+ .string_0001 = "(none)",
+};
+
+/* These are all under /proc/sys/debug/test_sysctl/ */
+static struct ctl_table test_table[] = {
+ {
+ .procname = "int_0001",
+ .data = &test_data.int_0001,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec_minmax,
+ .extra1 = &i_zero,
+ .extra2 = &i_one_hundred,
+ },
+ {
+ .procname = "int_0002",
+ .data = &test_data.int_0002,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec,
+ },
+ {
+ .procname = "int_0003",
+ .data = &test_data.int_0003,
+ .maxlen = sizeof(test_data.int_0003),
+ .mode = 0644,
+ .proc_handler = proc_dointvec,
+ },
+ {
+ .procname = "uint_0001",
+ .data = &test_data.uint_0001,
+ .maxlen = sizeof(unsigned int),
+ .mode = 0644,
+ .proc_handler = proc_douintvec,
+ },
+ {
+ .procname = "string_0001",
+ .data = &test_data.string_0001,
+ .maxlen = sizeof(test_data.string_0001),
+ .mode = 0644,
+ .proc_handler = proc_dostring,
+ },
+ { }
+};
+
+static struct ctl_table test_sysctl_table[] = {
+ {
+ .procname = "test_sysctl",
+ .maxlen = 0,
+ .mode = 0555,
+ .child = test_table,
+ },
+ { }
+};
+
+static struct ctl_table test_sysctl_root_table[] = {
+ {
+ .procname = "debug",
+ .maxlen = 0,
+ .mode = 0555,
+ .child = test_sysctl_table,
+ },
+ { }
+};
+
+static struct ctl_table_header *test_sysctl_header;
+
+static int __init test_sysctl_init(void)
+{
+ test_sysctl_header = register_sysctl_table(test_sysctl_root_table);
+ if (!test_sysctl_header)
+ return -ENOMEM;
+ return 0;
+}
+late_initcall(test_sysctl_init);
+
+static void __exit test_sysctl_exit(void)
+{
+ if (test_sysctl_header)
+ unregister_sysctl_table(test_sysctl_header);
+}
+
+module_exit(test_sysctl_exit);
+
+MODULE_AUTHOR("Luis R. Rodriguez <mcgrof@kernel.org>");
+MODULE_LICENSE("GPL");
diff --git a/lib/test_uuid.c b/lib/test_uuid.c
index 478c049..cd819c3 100644
--- a/lib/test_uuid.c
+++ b/lib/test_uuid.c
@@ -82,7 +82,7 @@
test_uuid_failed("conversion", false, true, data->uuid, NULL);
total_tests++;
- if (uuid_equal(&data->be, &be)) {
+ if (!uuid_equal(&data->be, &be)) {
sprintf(buf, "%pUb", &be);
test_uuid_failed("cmp", false, true, data->uuid, buf);
}
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 1e51652..a1a0ac0 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -1384,7 +1384,7 @@
page = __alloc_pages_node(nid,
htlb_alloc_mask(h)|__GFP_COMP|__GFP_THISNODE|
- __GFP_REPEAT|__GFP_NOWARN,
+ __GFP_RETRY_MAYFAIL|__GFP_NOWARN,
huge_page_order(h));
if (page) {
prep_new_huge_page(h, page, nid);
@@ -1525,7 +1525,7 @@
{
int order = huge_page_order(h);
- gfp_mask |= __GFP_COMP|__GFP_REPEAT|__GFP_NOWARN;
+ gfp_mask |= __GFP_COMP|__GFP_RETRY_MAYFAIL|__GFP_NOWARN;
if (nid == NUMA_NO_NODE)
nid = numa_mem_id();
return __alloc_pages_nodemask(gfp_mask, order, nid, nmask);
@@ -4078,6 +4078,7 @@
unsigned long vaddr = *position;
unsigned long remainder = *nr_pages;
struct hstate *h = hstate_vma(vma);
+ int err = -EFAULT;
while (vaddr < vma->vm_end && remainder) {
pte_t *pte;
@@ -4154,11 +4155,7 @@
}
ret = hugetlb_fault(mm, vma, vaddr, fault_flags);
if (ret & VM_FAULT_ERROR) {
- int err = vm_fault_to_errno(ret, flags);
-
- if (err)
- return err;
-
+ err = vm_fault_to_errno(ret, flags);
remainder = 0;
break;
}
@@ -4213,7 +4210,7 @@
*/
*position = vaddr;
- return i ? i : -EFAULT;
+ return i ? i : err;
}
#ifndef __HAVE_ARCH_FLUSH_HUGETLB_TLB_RANGE
diff --git a/mm/internal.h b/mm/internal.h
index 0e4f558..4ef49fc 100644
--- a/mm/internal.h
+++ b/mm/internal.h
@@ -23,7 +23,7 @@
* hints such as HIGHMEM usage.
*/
#define GFP_RECLAIM_MASK (__GFP_RECLAIM|__GFP_HIGH|__GFP_IO|__GFP_FS|\
- __GFP_NOWARN|__GFP_REPEAT|__GFP_NOFAIL|\
+ __GFP_NOWARN|__GFP_RETRY_MAYFAIL|__GFP_NOFAIL|\
__GFP_NORETRY|__GFP_MEMALLOC|__GFP_NOMEMALLOC|\
__GFP_ATOMIC)
@@ -498,6 +498,7 @@
#ifdef CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH
void try_to_unmap_flush(void);
void try_to_unmap_flush_dirty(void);
+void flush_tlb_batched_pending(struct mm_struct *mm);
#else
static inline void try_to_unmap_flush(void)
{
@@ -505,7 +506,9 @@
static inline void try_to_unmap_flush_dirty(void)
{
}
-
+static inline void flush_tlb_batched_pending(struct mm_struct *mm)
+{
+}
#endif /* CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH */
extern const struct trace_print_flags pageflag_names[];
diff --git a/mm/kasan/report.c b/mm/kasan/report.c
index 04bb1d3..6bcfb01 100644
--- a/mm/kasan/report.c
+++ b/mm/kasan/report.c
@@ -401,6 +401,7 @@
disable_trace_on_warning();
info.access_addr = (void *)addr;
+ info.first_bad_addr = (void *)addr;
info.access_size = size;
info.is_write = is_write;
info.ip = ip;
diff --git a/mm/madvise.c b/mm/madvise.c
index 9976852..47d8d8a 100644
--- a/mm/madvise.c
+++ b/mm/madvise.c
@@ -320,6 +320,7 @@
tlb_remove_check_page_size_change(tlb, PAGE_SIZE);
orig_pte = pte = pte_offset_map_lock(mm, pmd, addr, &ptl);
+ flush_tlb_batched_pending(mm);
arch_enter_lazy_mmu_mode();
for (; addr != end; pte++, addr += PAGE_SIZE) {
ptent = *pte;
diff --git a/mm/memory.c b/mm/memory.c
index cbb5719..f65beaa 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1197,6 +1197,7 @@
init_rss_vec(rss);
start_pte = pte_offset_map_lock(mm, pmd, addr, &ptl);
pte = start_pte;
+ flush_tlb_batched_pending(mm);
arch_enter_lazy_mmu_mode();
do {
pte_t ptent = *pte;
@@ -3591,7 +3592,7 @@
return 0;
}
-static int create_huge_pmd(struct vm_fault *vmf)
+static inline int create_huge_pmd(struct vm_fault *vmf)
{
if (vma_is_anonymous(vmf->vma))
return do_huge_pmd_anonymous_page(vmf);
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 7d8e562..d911fa5 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -1078,7 +1078,8 @@
/*
* if !vma, alloc_page_vma() will use task or system default policy
*/
- return alloc_page_vma(GFP_HIGHUSER_MOVABLE, vma, address);
+ return alloc_page_vma(GFP_HIGHUSER_MOVABLE | __GFP_RETRY_MAYFAIL,
+ vma, address);
}
#else
diff --git a/mm/mmap.c b/mm/mmap.c
index 7fa6759..f19efcf 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -2231,7 +2231,7 @@
/* Guard against exceeding limits of the address space. */
address &= PAGE_MASK;
- if (address >= TASK_SIZE)
+ if (address >= (TASK_SIZE & PAGE_MASK))
return -ENOMEM;
address += PAGE_SIZE;
diff --git a/mm/mprotect.c b/mm/mprotect.c
index 1a8c9ca..4180ad8 100644
--- a/mm/mprotect.c
+++ b/mm/mprotect.c
@@ -64,6 +64,7 @@
atomic_read(&vma->vm_mm->mm_users) == 1)
target_node = numa_node_id();
+ flush_tlb_batched_pending(vma->vm_mm);
arch_enter_lazy_mmu_mode();
do {
oldpte = *pte;
diff --git a/mm/mremap.c b/mm/mremap.c
index cd8a1b1..3f23715 100644
--- a/mm/mremap.c
+++ b/mm/mremap.c
@@ -152,6 +152,7 @@
new_ptl = pte_lockptr(mm, new_pmd);
if (new_ptl != old_ptl)
spin_lock_nested(new_ptl, SINGLE_DEPTH_NESTING);
+ flush_tlb_batched_pending(vma->vm_mm);
arch_enter_lazy_mmu_mode();
for (; old_addr < old_end; old_pte++, old_addr += PAGE_SIZE,
@@ -428,6 +429,7 @@
static unsigned long mremap_to(unsigned long addr, unsigned long old_len,
unsigned long new_addr, unsigned long new_len, bool *locked,
struct vm_userfaultfd_ctx *uf,
+ struct list_head *uf_unmap_early,
struct list_head *uf_unmap)
{
struct mm_struct *mm = current->mm;
@@ -446,7 +448,7 @@
if (addr + old_len > new_addr && new_addr + new_len > addr)
goto out;
- ret = do_munmap(mm, new_addr, new_len, NULL);
+ ret = do_munmap(mm, new_addr, new_len, uf_unmap_early);
if (ret)
goto out;
@@ -514,6 +516,7 @@
unsigned long charged = 0;
bool locked = false;
struct vm_userfaultfd_ctx uf = NULL_VM_UFFD_CTX;
+ LIST_HEAD(uf_unmap_early);
LIST_HEAD(uf_unmap);
if (flags & ~(MREMAP_FIXED | MREMAP_MAYMOVE))
@@ -541,7 +544,7 @@
if (flags & MREMAP_FIXED) {
ret = mremap_to(addr, old_len, new_addr, new_len,
- &locked, &uf, &uf_unmap);
+ &locked, &uf, &uf_unmap_early, &uf_unmap);
goto out;
}
@@ -621,6 +624,7 @@
up_write(¤t->mm->mmap_sem);
if (locked && new_len > old_len)
mm_populate(new_addr + old_len, new_len - old_len);
+ userfaultfd_unmap_complete(mm, &uf_unmap_early);
mremap_userfaultfd_complete(&uf, addr, new_addr, old_len);
userfaultfd_unmap_complete(mm, &uf_unmap);
return ret;
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 0b60cc7..96e93b2 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -601,7 +601,7 @@
{
struct wb_domain *cgdom;
- __inc_wb_stat(wb, WB_WRITTEN);
+ inc_wb_stat(wb, WB_WRITTEN);
wb_domain_writeout_inc(&global_wb_domain, &wb->completions,
wb->bdi->max_prop_frac);
@@ -2435,8 +2435,8 @@
__inc_lruvec_page_state(page, NR_FILE_DIRTY);
__inc_zone_page_state(page, NR_ZONE_WRITE_PENDING);
__inc_node_page_state(page, NR_DIRTIED);
- __inc_wb_stat(wb, WB_RECLAIMABLE);
- __inc_wb_stat(wb, WB_DIRTIED);
+ inc_wb_stat(wb, WB_RECLAIMABLE);
+ inc_wb_stat(wb, WB_DIRTIED);
task_io_account_write(PAGE_SIZE);
current->nr_dirtied++;
this_cpu_inc(bdp_ratelimits);
@@ -2741,7 +2741,7 @@
if (bdi_cap_account_writeback(bdi)) {
struct bdi_writeback *wb = inode_to_wb(inode);
- __dec_wb_stat(wb, WB_WRITEBACK);
+ dec_wb_stat(wb, WB_WRITEBACK);
__wb_writeout_inc(wb);
}
}
@@ -2786,7 +2786,7 @@
page_index(page),
PAGECACHE_TAG_WRITEBACK);
if (bdi_cap_account_writeback(bdi))
- __inc_wb_stat(inode_to_wb(inode), WB_WRITEBACK);
+ inc_wb_stat(inode_to_wb(inode), WB_WRITEBACK);
/*
* We can come through here when swapping anonymous
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 64b7d82..fc32aa8 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -3284,6 +3284,14 @@
/* The OOM killer will not help higher order allocs */
if (order > PAGE_ALLOC_COSTLY_ORDER)
goto out;
+ /*
+ * We have already exhausted all our reclaim opportunities without any
+ * success so it is time to admit defeat. We will skip the OOM killer
+ * because it is very likely that the caller has a more reasonable
+ * fallback than shooting a random task.
+ */
+ if (gfp_mask & __GFP_RETRY_MAYFAIL)
+ goto out;
/* The OOM killer does not needlessly kill tasks for lowmem */
if (ac->high_zoneidx < ZONE_NORMAL)
goto out;
@@ -3413,7 +3421,7 @@
}
/*
- * !costly requests are much more important than __GFP_REPEAT
+ * !costly requests are much more important than __GFP_RETRY_MAYFAIL
* costly ones because they are de facto nofail and invoke OOM
* killer to move on while costly can fail and users are ready
* to cope with that. 1/4 retries is rather arbitrary but we
@@ -3920,9 +3928,9 @@
/*
* Do not retry costly high order allocations unless they are
- * __GFP_REPEAT
+ * __GFP_RETRY_MAYFAIL
*/
- if (costly_order && !(gfp_mask & __GFP_REPEAT))
+ if (costly_order && !(gfp_mask & __GFP_RETRY_MAYFAIL))
goto nopage;
if (should_reclaim_retry(gfp_mask, order, ac, alloc_flags,
@@ -4883,9 +4891,11 @@
NUMA_ZONELIST_ORDER_LEN);
user_zonelist_order = oldval;
} else if (oldval != user_zonelist_order) {
+ mem_hotplug_begin();
mutex_lock(&zonelists_mutex);
build_all_zonelists(NULL, NULL);
mutex_unlock(&zonelists_mutex);
+ mem_hotplug_done();
}
}
out:
diff --git a/mm/page_io.c b/mm/page_io.c
index b6c4ac38..5f61b54 100644
--- a/mm/page_io.c
+++ b/mm/page_io.c
@@ -22,6 +22,7 @@
#include <linux/frontswap.h>
#include <linux/blkdev.h>
#include <linux/uio.h>
+#include <linux/sched/task.h>
#include <asm/pgtable.h>
static struct bio *get_swap_bio(gfp_t gfp_flags,
@@ -136,6 +137,7 @@
WRITE_ONCE(bio->bi_private, NULL);
bio_put(bio);
wake_up_process(waiter);
+ put_task_struct(waiter);
}
int generic_swapfile_activate(struct swap_info_struct *sis,
@@ -378,6 +380,11 @@
goto out;
}
bdev = bio->bi_bdev;
+ /*
+ * Keep this task valid during swap readpage because the oom killer may
+ * attempt to access it in the page fault retry time check.
+ */
+ get_task_struct(current);
bio->bi_private = current;
bio_set_op_attrs(bio, REQ_OP_READ, 0);
count_vm_event(PSWPIN);
diff --git a/mm/rmap.c b/mm/rmap.c
index ced14f1..c8993c6 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -605,6 +605,13 @@
tlb_ubc->flush_required = true;
/*
+ * Ensure compiler does not re-order the setting of tlb_flush_batched
+ * before the PTE is cleared.
+ */
+ barrier();
+ mm->tlb_flush_batched = true;
+
+ /*
* If the PTE was dirty then it's best to assume it's writable. The
* caller must use try_to_unmap_flush_dirty() or try_to_unmap_flush()
* before the page is queued for IO.
@@ -631,6 +638,35 @@
return should_defer;
}
+
+/*
+ * Reclaim unmaps pages under the PTL but do not flush the TLB prior to
+ * releasing the PTL if TLB flushes are batched. It's possible for a parallel
+ * operation such as mprotect or munmap to race between reclaim unmapping
+ * the page and flushing the page. If this race occurs, it potentially allows
+ * access to data via a stale TLB entry. Tracking all mm's that have TLB
+ * batching in flight would be expensive during reclaim so instead track
+ * whether TLB batching occurred in the past and if so then do a flush here
+ * if required. This will cost one additional flush per reclaim cycle paid
+ * by the first operation at risk such as mprotect and mumap.
+ *
+ * This must be called under the PTL so that an access to tlb_flush_batched
+ * that is potentially a "reclaim vs mprotect/munmap/etc" race will synchronise
+ * via the PTL.
+ */
+void flush_tlb_batched_pending(struct mm_struct *mm)
+{
+ if (mm->tlb_flush_batched) {
+ flush_tlb_mm(mm);
+
+ /*
+ * Do not allow the compiler to re-order the clearing of
+ * tlb_flush_batched before the tlb is flushed.
+ */
+ barrier();
+ mm->tlb_flush_batched = false;
+ }
+}
#else
static void set_tlb_ubc_flush_pending(struct mm_struct *mm, bool writable)
{
diff --git a/mm/sparse-vmemmap.c b/mm/sparse-vmemmap.c
index a56c398..c50b1a1 100644
--- a/mm/sparse-vmemmap.c
+++ b/mm/sparse-vmemmap.c
@@ -56,11 +56,11 @@
if (node_state(node, N_HIGH_MEMORY))
page = alloc_pages_node(
- node, GFP_KERNEL | __GFP_ZERO | __GFP_REPEAT,
+ node, GFP_KERNEL | __GFP_ZERO | __GFP_RETRY_MAYFAIL,
get_order(size));
else
page = alloc_pages(
- GFP_KERNEL | __GFP_ZERO | __GFP_REPEAT,
+ GFP_KERNEL | __GFP_ZERO | __GFP_RETRY_MAYFAIL,
get_order(size));
if (page)
return page_address(page);
diff --git a/mm/util.c b/mm/util.c
index 26be640..7b07ec8 100644
--- a/mm/util.c
+++ b/mm/util.c
@@ -83,6 +83,8 @@
* @s: the string to duplicate
* @max: read at most @max chars from @s
* @gfp: the GFP mask used in the kmalloc() call when allocating memory
+ *
+ * Note: Use kmemdup_nul() instead if the size is known exactly.
*/
char *kstrndup(const char *s, size_t max, gfp_t gfp)
{
@@ -121,6 +123,28 @@
EXPORT_SYMBOL(kmemdup);
/**
+ * kmemdup_nul - Create a NUL-terminated string from unterminated data
+ * @s: The data to stringify
+ * @len: The size of the data
+ * @gfp: the GFP mask used in the kmalloc() call when allocating memory
+ */
+char *kmemdup_nul(const char *s, size_t len, gfp_t gfp)
+{
+ char *buf;
+
+ if (!s)
+ return NULL;
+
+ buf = kmalloc_track_caller(len + 1, gfp);
+ if (buf) {
+ memcpy(buf, s, len);
+ buf[len] = '\0';
+ }
+ return buf;
+}
+EXPORT_SYMBOL(kmemdup_nul);
+
+/**
* memdup_user - duplicate memory region from user space
*
* @src: source address in user space
@@ -339,9 +363,9 @@
* Uses kmalloc to get the memory but if the allocation fails then falls back
* to the vmalloc allocator. Use kvfree for freeing the memory.
*
- * Reclaim modifiers - __GFP_NORETRY and __GFP_NOFAIL are not supported. __GFP_REPEAT
- * is supported only for large (>32kB) allocations, and it should be used only if
- * kmalloc is preferable to the vmalloc fallback, due to visible performance drawbacks.
+ * Reclaim modifiers - __GFP_NORETRY and __GFP_NOFAIL are not supported.
+ * __GFP_RETRY_MAYFAIL is supported, and it should be used only if kmalloc is
+ * preferable to the vmalloc fallback, due to visible performance drawbacks.
*
* Any use of gfp flags outside of GFP_KERNEL should be consulted with mm people.
*/
@@ -366,13 +390,7 @@
if (size > PAGE_SIZE) {
kmalloc_flags |= __GFP_NOWARN;
- /*
- * We have to override __GFP_REPEAT by __GFP_NORETRY for !costly
- * requests because there is no other way to tell the allocator
- * that we want to fail rather than retry endlessly.
- */
- if (!(kmalloc_flags & __GFP_REPEAT) ||
- (size <= PAGE_SIZE << PAGE_ALLOC_COSTLY_ORDER))
+ if (!(kmalloc_flags & __GFP_RETRY_MAYFAIL))
kmalloc_flags |= __GFP_NORETRY;
}
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 6016ab0..8698c1c 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -1795,7 +1795,7 @@
* allocator with @gfp_mask flags. Map them into contiguous
* kernel virtual space, using a pagetable protection of @prot.
*
- * Reclaim modifiers in @gfp_mask - __GFP_NORETRY, __GFP_REPEAT
+ * Reclaim modifiers in @gfp_mask - __GFP_NORETRY, __GFP_RETRY_MAYFAIL
* and __GFP_NOFAIL are not supported
*
* Any use of gfp flags outside of GFP_KERNEL should be consulted
diff --git a/mm/vmscan.c b/mm/vmscan.c
index e9210f8..a1af041 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -2506,18 +2506,18 @@
return false;
/* Consider stopping depending on scan and reclaim activity */
- if (sc->gfp_mask & __GFP_REPEAT) {
+ if (sc->gfp_mask & __GFP_RETRY_MAYFAIL) {
/*
- * For __GFP_REPEAT allocations, stop reclaiming if the
+ * For __GFP_RETRY_MAYFAIL allocations, stop reclaiming if the
* full LRU list has been scanned and we are still failing
* to reclaim pages. This full LRU scan is potentially
- * expensive but a __GFP_REPEAT caller really wants to succeed
+ * expensive but a __GFP_RETRY_MAYFAIL caller really wants to succeed
*/
if (!nr_reclaimed && !nr_scanned)
return false;
} else {
/*
- * For non-__GFP_REPEAT allocations which can presumably
+ * For non-__GFP_RETRY_MAYFAIL allocations which can presumably
* fail without consequence, stop if we failed to reclaim
* any pages from the last SWAP_CLUSTER_MAX number of
* pages that were scanned. This will return to the
diff --git a/mm/zsmalloc.c b/mm/zsmalloc.c
index 013eea7..308acb9 100644
--- a/mm/zsmalloc.c
+++ b/mm/zsmalloc.c
@@ -2453,7 +2453,6 @@
}
destroy_cache(pool);
- kfree(pool->size_class);
kfree(pool->name);
kfree(pool);
}
diff --git a/net/9p/client.c b/net/9p/client.c
index 1218fb3..4674235 100644
--- a/net/9p/client.c
+++ b/net/9p/client.c
@@ -37,6 +37,7 @@
#include <linux/uio.h>
#include <net/9p/9p.h>
#include <linux/parser.h>
+#include <linux/seq_file.h>
#include <net/9p/client.h>
#include <net/9p/transport.h>
#include "protocol.h"
@@ -77,6 +78,30 @@
}
EXPORT_SYMBOL(p9_is_proto_dotu);
+int p9_show_client_options(struct seq_file *m, struct p9_client *clnt)
+{
+ if (clnt->msize != 8192)
+ seq_printf(m, ",msize=%u", clnt->msize);
+ seq_printf(m, "trans=%s", clnt->trans_mod->name);
+
+ switch (clnt->proto_version) {
+ case p9_proto_legacy:
+ seq_puts(m, ",noextend");
+ break;
+ case p9_proto_2000u:
+ seq_puts(m, ",version=9p2000.u");
+ break;
+ case p9_proto_2000L:
+ /* Default */
+ break;
+ }
+
+ if (clnt->trans_mod->show_options)
+ return clnt->trans_mod->show_options(m, clnt);
+ return 0;
+}
+EXPORT_SYMBOL(p9_show_client_options);
+
/*
* Some error codes are taken directly from the server replies,
* make sure they are valid.
diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c
index dca3cdd..ddfa866 100644
--- a/net/9p/trans_fd.c
+++ b/net/9p/trans_fd.c
@@ -41,6 +41,7 @@
#include <linux/file.h>
#include <linux/parser.h>
#include <linux/slab.h>
+#include <linux/seq_file.h>
#include <net/9p/9p.h>
#include <net/9p/client.h>
#include <net/9p/transport.h>
@@ -51,6 +52,9 @@
#define MAX_SOCK_BUF (64*1024)
#define MAXPOLLWADDR 2
+static struct p9_trans_module p9_tcp_trans;
+static struct p9_trans_module p9_fd_trans;
+
/**
* struct p9_fd_opts - per-transport options
* @rfd: file descriptor for reading (trans=fd)
@@ -63,7 +67,7 @@
int rfd;
int wfd;
u16 port;
- int privport;
+ bool privport;
};
/*
@@ -720,6 +724,20 @@
return 0;
}
+static int p9_fd_show_options(struct seq_file *m, struct p9_client *clnt)
+{
+ if (clnt->trans_mod == &p9_tcp_trans) {
+ if (clnt->trans_opts.tcp.port != P9_PORT)
+ seq_printf(m, "port=%u", clnt->trans_opts.tcp.port);
+ } else if (clnt->trans_mod == &p9_fd_trans) {
+ if (clnt->trans_opts.fd.rfd != ~0)
+ seq_printf(m, "rfd=%u", clnt->trans_opts.fd.rfd);
+ if (clnt->trans_opts.fd.wfd != ~0)
+ seq_printf(m, "wfd=%u", clnt->trans_opts.fd.wfd);
+ }
+ return 0;
+}
+
/**
* parse_opts - parse mount options into p9_fd_opts structure
* @params: options string passed from mount
@@ -738,7 +756,7 @@
opts->port = P9_PORT;
opts->rfd = ~0;
opts->wfd = ~0;
- opts->privport = 0;
+ opts->privport = false;
if (!params)
return 0;
@@ -776,7 +794,7 @@
opts->wfd = option;
break;
case Opt_privport:
- opts->privport = 1;
+ opts->privport = true;
break;
default:
continue;
@@ -942,6 +960,8 @@
csocket = NULL;
+ client->trans_opts.tcp.port = opts.port;
+ client->trans_opts.tcp.privport = opts.privport;
sin_server.sin_family = AF_INET;
sin_server.sin_addr.s_addr = in_aton(addr);
sin_server.sin_port = htons(opts.port);
@@ -1020,6 +1040,8 @@
struct p9_fd_opts opts;
parse_opts(args, &opts);
+ client->trans_opts.fd.rfd = opts.rfd;
+ client->trans_opts.fd.wfd = opts.wfd;
if (opts.rfd == ~0 || opts.wfd == ~0) {
pr_err("Insufficient options for proto=fd\n");
@@ -1044,6 +1066,7 @@
.request = p9_fd_request,
.cancel = p9_fd_cancel,
.cancelled = p9_fd_cancelled,
+ .show_options = p9_fd_show_options,
.owner = THIS_MODULE,
};
@@ -1056,6 +1079,7 @@
.request = p9_fd_request,
.cancel = p9_fd_cancel,
.cancelled = p9_fd_cancelled,
+ .show_options = p9_fd_show_options,
.owner = THIS_MODULE,
};
@@ -1068,6 +1092,7 @@
.request = p9_fd_request,
.cancel = p9_fd_cancel,
.cancelled = p9_fd_cancelled,
+ .show_options = p9_fd_show_options,
.owner = THIS_MODULE,
};
diff --git a/net/9p/trans_rdma.c b/net/9p/trans_rdma.c
index 553ed4e..6d8e303 100644
--- a/net/9p/trans_rdma.c
+++ b/net/9p/trans_rdma.c
@@ -43,6 +43,7 @@
#include <linux/parser.h>
#include <linux/semaphore.h>
#include <linux/slab.h>
+#include <linux/seq_file.h>
#include <net/9p/9p.h>
#include <net/9p/client.h>
#include <net/9p/transport.h>
@@ -70,6 +71,8 @@
* @dm_mr: DMA Memory Region pointer
* @lkey: The local access only memory region key
* @timeout: Number of uSecs to wait for connection management events
+ * @privport: Whether a privileged port may be used
+ * @port: The port to use
* @sq_depth: The depth of the Send Queue
* @sq_sem: Semaphore for the SQ
* @rq_depth: The depth of the Receive Queue.
@@ -95,6 +98,8 @@
struct ib_qp *qp;
struct ib_cq *cq;
long timeout;
+ bool privport;
+ u16 port;
int sq_depth;
struct semaphore sq_sem;
int rq_depth;
@@ -133,10 +138,10 @@
*/
struct p9_rdma_opts {
short port;
+ bool privport;
int sq_depth;
int rq_depth;
long timeout;
- int privport;
};
/*
@@ -159,6 +164,23 @@
{Opt_err, NULL},
};
+static int p9_rdma_show_options(struct seq_file *m, struct p9_client *clnt)
+{
+ struct p9_trans_rdma *rdma = clnt->trans;
+
+ if (rdma->port != P9_PORT)
+ seq_printf(m, ",port=%u", rdma->port);
+ if (rdma->sq_depth != P9_RDMA_SQ_DEPTH)
+ seq_printf(m, ",sq=%u", rdma->sq_depth);
+ if (rdma->rq_depth != P9_RDMA_RQ_DEPTH)
+ seq_printf(m, ",rq=%u", rdma->rq_depth);
+ if (rdma->timeout != P9_RDMA_TIMEOUT)
+ seq_printf(m, ",timeout=%lu", rdma->timeout);
+ if (rdma->privport)
+ seq_puts(m, ",privport");
+ return 0;
+}
+
/**
* parse_opts - parse mount options into rdma options structure
* @params: options string passed from mount
@@ -177,7 +199,7 @@
opts->sq_depth = P9_RDMA_SQ_DEPTH;
opts->rq_depth = P9_RDMA_RQ_DEPTH;
opts->timeout = P9_RDMA_TIMEOUT;
- opts->privport = 0;
+ opts->privport = false;
if (!params)
return 0;
@@ -218,7 +240,7 @@
opts->timeout = option;
break;
case Opt_privport:
- opts->privport = 1;
+ opts->privport = true;
break;
default:
continue;
@@ -560,6 +582,8 @@
if (!rdma)
return NULL;
+ rdma->port = opts->port;
+ rdma->privport = opts->privport;
rdma->sq_depth = opts->sq_depth;
rdma->rq_depth = opts->rq_depth;
rdma->timeout = opts->timeout;
@@ -733,6 +757,7 @@
.request = rdma_request,
.cancel = rdma_cancel,
.cancelled = rdma_cancelled,
+ .show_options = p9_rdma_show_options,
};
/**
diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c
index f0f3447..861ae2a 100644
--- a/net/bridge/br_device.c
+++ b/net/bridge/br_device.c
@@ -34,11 +34,11 @@
netdev_tx_t br_dev_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct net_bridge *br = netdev_priv(dev);
- const unsigned char *dest = skb->data;
struct net_bridge_fdb_entry *dst;
struct net_bridge_mdb_entry *mdst;
struct pcpu_sw_netstats *brstats = this_cpu_ptr(br->stats);
const struct nf_br_ops *nf_ops;
+ const unsigned char *dest;
u16 vid = 0;
rcu_read_lock();
@@ -61,6 +61,7 @@
if (!br_allowed_ingress(br, br_vlan_group_rcu(br), skb, &vid))
goto out;
+ dest = eth_hdr(skb)->h_dest;
if (is_broadcast_ether_addr(dest)) {
br_flood(br, skb, BR_PKT_BROADCAST, false, true);
} else if (is_multicast_ether_addr(dest)) {
diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c
index 013f2290b..7637f58 100644
--- a/net/bridge/br_input.c
+++ b/net/bridge/br_input.c
@@ -131,11 +131,11 @@
int br_handle_frame_finish(struct net *net, struct sock *sk, struct sk_buff *skb)
{
struct net_bridge_port *p = br_port_get_rcu(skb->dev);
- const unsigned char *dest = eth_hdr(skb)->h_dest;
enum br_pkt_type pkt_type = BR_PKT_UNICAST;
struct net_bridge_fdb_entry *dst = NULL;
struct net_bridge_mdb_entry *mdst;
bool local_rcv, mcast_hit = false;
+ const unsigned char *dest;
struct net_bridge *br;
u16 vid = 0;
@@ -153,6 +153,7 @@
br_fdb_update(br, p, eth_hdr(skb)->h_source, vid, false);
local_rcv = !!(br->dev->flags & IFF_PROMISC);
+ dest = eth_hdr(skb)->h_dest;
if (is_multicast_ether_addr(dest)) {
/* by definition the broadcast is also a multicast address */
if (is_broadcast_ether_addr(dest)) {
diff --git a/net/bridge/br_mdb.c b/net/bridge/br_mdb.c
index 09dcdb9..a0b11e7 100644
--- a/net/bridge/br_mdb.c
+++ b/net/bridge/br_mdb.c
@@ -323,7 +323,8 @@
__mdb_entry_to_br_ip(entry, &complete_info->ip);
mdb.obj.complete_priv = complete_info;
mdb.obj.complete = br_mdb_complete;
- switchdev_port_obj_add(port_dev, &mdb.obj);
+ if (switchdev_port_obj_add(port_dev, &mdb.obj))
+ kfree(complete_info);
}
} else if (port_dev && type == RTM_DELMDB) {
switchdev_port_obj_del(port_dev, &mdb.obj);
diff --git a/net/ceph/ceph_common.c b/net/ceph/ceph_common.c
index 3d265c5..5c036d2 100644
--- a/net/ceph/ceph_common.c
+++ b/net/ceph/ceph_common.c
@@ -599,7 +599,11 @@
{
struct ceph_client *client;
struct ceph_entity_addr *myaddr = NULL;
- int err = -ENOMEM;
+ int err;
+
+ err = wait_for_random_bytes();
+ if (err < 0)
+ return ERR_PTR(err);
client = kzalloc(sizeof(*client), GFP_KERNEL);
if (client == NULL)
diff --git a/net/ceph/crush/mapper.c b/net/ceph/crush/mapper.c
index 746b145..417df67 100644
--- a/net/ceph/crush/mapper.c
+++ b/net/ceph/crush/mapper.c
@@ -306,7 +306,7 @@
const struct crush_choose_arg *arg,
int position)
{
- if (!arg || !arg->weight_set || arg->weight_set_size == 0)
+ if (!arg || !arg->weight_set)
return bucket->item_weights;
if (position >= arg->weight_set_size)
diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
index 0c31035..a67298c 100644
--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -1287,10 +1287,10 @@
if (m->needs_out_seq) {
m->hdr.seq = cpu_to_le64(++con->out_seq);
m->needs_out_seq = false;
- }
- if (con->ops->reencode_message)
- con->ops->reencode_message(m);
+ if (con->ops->reencode_message)
+ con->ops->reencode_message(m);
+ }
dout("prepare_write_message %p seq %lld type %d len %d+%d+%zd\n",
m, con->out_seq, le16_to_cpu(m->hdr.type),
@@ -3203,8 +3203,10 @@
return NULL;
data = kmem_cache_zalloc(ceph_msg_data_cache, GFP_NOFS);
- if (data)
- data->type = type;
+ if (!data)
+ return NULL;
+
+ data->type = type;
INIT_LIST_HEAD(&data->links);
return data;
diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c
index 86a9737..dcfbdd7 100644
--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -1337,6 +1337,8 @@
bool legacy_change;
bool split = false;
bool sort_bitwise = ceph_osdmap_flag(osdc, CEPH_OSDMAP_SORTBITWISE);
+ bool recovery_deletes = ceph_osdmap_flag(osdc,
+ CEPH_OSDMAP_RECOVERY_DELETES);
enum calc_target_result ct_res;
int ret;
@@ -1399,6 +1401,8 @@
pi->pg_num,
t->sort_bitwise,
sort_bitwise,
+ t->recovery_deletes,
+ recovery_deletes,
&last_pgid))
force_resend = true;
@@ -1421,6 +1425,7 @@
t->pg_num = pi->pg_num;
t->pg_num_mask = pi->pg_num_mask;
t->sort_bitwise = sort_bitwise;
+ t->recovery_deletes = recovery_deletes;
t->osd = acting.primary;
}
@@ -1918,10 +1923,12 @@
}
ceph_encode_32(&p, req->r_attempts); /* retry_attempt */
- BUG_ON(p != end - 8); /* space for features */
+ BUG_ON(p > end - 8); /* space for features */
msg->hdr.version = cpu_to_le16(8); /* MOSDOp v8 */
/* front_len is finalized in encode_request_finish() */
+ msg->front.iov_len = p - msg->front.iov_base;
+ msg->hdr.front_len = cpu_to_le32(msg->front.iov_len);
msg->hdr.data_len = cpu_to_le32(data_len);
/*
* The header "data_off" is a hint to the receiver allowing it
@@ -1937,11 +1944,12 @@
static void encode_request_finish(struct ceph_msg *msg)
{
void *p = msg->front.iov_base;
+ void *const partial_end = p + msg->front.iov_len;
void *const end = p + msg->front_alloc_len;
if (CEPH_HAVE_FEATURE(msg->con->peer_features, RESEND_ON_SPLIT)) {
/* luminous OSD -- encode features and be done */
- p = end - 8;
+ p = partial_end;
ceph_encode_64(&p, msg->con->peer_features);
} else {
struct {
@@ -1984,7 +1992,7 @@
oid_len = p - oid;
tail = p;
- tail_len = (end - p) - 8;
+ tail_len = partial_end - p;
p = msg->front.iov_base;
ceph_encode_copy(&p, &head.client_inc, sizeof(head.client_inc));
@@ -5310,7 +5318,10 @@
static void osd_reencode_message(struct ceph_msg *msg)
{
- encode_request_finish(msg);
+ int type = le16_to_cpu(msg->hdr.type);
+
+ if (type == CEPH_MSG_OSD_OP)
+ encode_request_finish(msg);
}
static int osd_sign_message(struct ceph_msg *msg)
diff --git a/net/ceph/osdmap.c b/net/ceph/osdmap.c
index 864789c..f358d0b 100644
--- a/net/ceph/osdmap.c
+++ b/net/ceph/osdmap.c
@@ -295,6 +295,10 @@
ret = decode_choose_arg(p, end, arg);
if (ret)
goto fail;
+
+ if (arg->ids_size &&
+ arg->ids_size != c->buckets[bucket_index]->size)
+ goto e_inval;
}
insert_choose_arg_map(&c->choose_args, arg_map);
@@ -338,7 +342,7 @@
static struct crush_map *crush_decode(void *pbyval, void *end)
{
struct crush_map *c;
- int err = -EINVAL;
+ int err;
int i, j;
void **p = &pbyval;
void *start = pbyval;
@@ -407,7 +411,6 @@
size = sizeof(struct crush_bucket_straw2);
break;
default:
- err = -EINVAL;
goto bad;
}
BUG_ON(size == 0);
@@ -439,31 +442,31 @@
err = crush_decode_uniform_bucket(p, end,
(struct crush_bucket_uniform *)b);
if (err < 0)
- goto bad;
+ goto fail;
break;
case CRUSH_BUCKET_LIST:
err = crush_decode_list_bucket(p, end,
(struct crush_bucket_list *)b);
if (err < 0)
- goto bad;
+ goto fail;
break;
case CRUSH_BUCKET_TREE:
err = crush_decode_tree_bucket(p, end,
(struct crush_bucket_tree *)b);
if (err < 0)
- goto bad;
+ goto fail;
break;
case CRUSH_BUCKET_STRAW:
err = crush_decode_straw_bucket(p, end,
(struct crush_bucket_straw *)b);
if (err < 0)
- goto bad;
+ goto fail;
break;
case CRUSH_BUCKET_STRAW2:
err = crush_decode_straw2_bucket(p, end,
(struct crush_bucket_straw2 *)b);
if (err < 0)
- goto bad;
+ goto fail;
break;
}
}
@@ -474,7 +477,6 @@
u32 yes;
struct crush_rule *r;
- err = -EINVAL;
ceph_decode_32_safe(p, end, yes, bad);
if (!yes) {
dout("crush_decode NO rule %d off %x %p to %p\n",
@@ -489,7 +491,6 @@
/* len */
ceph_decode_32_safe(p, end, yes, bad);
#if BITS_PER_LONG == 32
- err = -EINVAL;
if (yes > (ULONG_MAX - sizeof(*r))
/ sizeof(struct crush_rule_step))
goto bad;
@@ -557,7 +558,7 @@
if (*p != end) {
err = decode_choose_args(p, end, c);
if (err)
- goto bad;
+ goto fail;
}
done:
@@ -567,10 +568,14 @@
badmem:
err = -ENOMEM;
-bad:
+fail:
dout("crush_decode fail %d\n", err);
crush_destroy(c);
return ERR_PTR(err);
+
+bad:
+ err = -EINVAL;
+ goto fail;
}
int ceph_pg_compare(const struct ceph_pg *lhs, const struct ceph_pg *rhs)
@@ -1399,7 +1404,7 @@
return ERR_PTR(-EINVAL);
ceph_decode_need(p, end, 2 * len * sizeof(u32), e_inval);
- pg = kzalloc(sizeof(*pg) + 2 * len * sizeof(u32), GFP_NOIO);
+ pg = alloc_pg_mapping(2 * len * sizeof(u32));
if (!pg)
return ERR_PTR(-ENOMEM);
@@ -1544,7 +1549,7 @@
if (struct_v >= 3) {
/* erasure_code_profiles */
ceph_decode_skip_map_of_map(p, end, string, string, string,
- bad);
+ e_inval);
}
if (struct_v >= 4) {
@@ -1825,9 +1830,9 @@
if (struct_v >= 3) {
/* new_erasure_code_profiles */
ceph_decode_skip_map_of_map(p, end, string, string, string,
- bad);
+ e_inval);
/* old_erasure_code_profiles */
- ceph_decode_skip_set(p, end, string, bad);
+ ceph_decode_skip_set(p, end, string, e_inval);
}
if (struct_v >= 4) {
@@ -2077,6 +2082,8 @@
u32 new_pg_num,
bool old_sort_bitwise,
bool new_sort_bitwise,
+ bool old_recovery_deletes,
+ bool new_recovery_deletes,
const struct ceph_pg *pgid)
{
return !osds_equal(old_acting, new_acting) ||
@@ -2084,7 +2091,8 @@
old_size != new_size ||
old_min_size != new_min_size ||
ceph_pg_is_split(pgid, old_pg_num, new_pg_num) ||
- old_sort_bitwise != new_sort_bitwise;
+ old_sort_bitwise != new_sort_bitwise ||
+ old_recovery_deletes != new_recovery_deletes;
}
static int calc_pg_rank(int osd, const struct ceph_osds *acting)
@@ -2300,10 +2308,17 @@
}
}
+/*
+ * Magic value used for a "default" fallback choose_args, used if the
+ * crush_choose_arg_map passed to do_crush() does not exist. If this
+ * also doesn't exist, fall back to canonical weights.
+ */
+#define CEPH_DEFAULT_CHOOSE_ARGS -1
+
static int do_crush(struct ceph_osdmap *map, int ruleno, int x,
int *result, int result_max,
const __u32 *weight, int weight_max,
- u64 choose_args_index)
+ s64 choose_args_index)
{
struct crush_choose_arg_map *arg_map;
int r;
@@ -2312,6 +2327,9 @@
arg_map = lookup_choose_arg_map(&map->crush->choose_args,
choose_args_index);
+ if (!arg_map)
+ arg_map = lookup_choose_arg_map(&map->crush->choose_args,
+ CEPH_DEFAULT_CHOOSE_ARGS);
mutex_lock(&map->crush_workspace_mutex);
r = crush_do_rule(map->crush, ruleno, x, result, result_max,
@@ -2422,40 +2440,23 @@
for (i = 0; i < pg->pg_upmap.len; i++)
raw->osds[i] = pg->pg_upmap.osds[i];
raw->size = pg->pg_upmap.len;
- return;
+ /* check and apply pg_upmap_items, if any */
}
pg = lookup_pg_mapping(&osdmap->pg_upmap_items, pgid);
if (pg) {
- /*
- * Note: this approach does not allow a bidirectional swap,
- * e.g., [[1,2],[2,1]] applied to [0,1,2] -> [0,2,1].
- */
- for (i = 0; i < pg->pg_upmap_items.len; i++) {
- int from = pg->pg_upmap_items.from_to[i][0];
- int to = pg->pg_upmap_items.from_to[i][1];
- int pos = -1;
- bool exists = false;
+ for (i = 0; i < raw->size; i++) {
+ for (j = 0; j < pg->pg_upmap_items.len; j++) {
+ int from = pg->pg_upmap_items.from_to[j][0];
+ int to = pg->pg_upmap_items.from_to[j][1];
- /* make sure replacement doesn't already appear */
- for (j = 0; j < raw->size; j++) {
- int osd = raw->osds[j];
-
- if (osd == to) {
- exists = true;
+ if (from == raw->osds[i]) {
+ if (!(to != CRUSH_ITEM_NONE &&
+ to < osdmap->max_osd &&
+ osdmap->osd_weight[to] == 0))
+ raw->osds[i] = to;
break;
}
- /* ignore mapping if target is marked out */
- if (osd == from && pos < 0 &&
- !(to != CRUSH_ITEM_NONE &&
- to < osdmap->max_osd &&
- osdmap->osd_weight[to] == 0)) {
- pos = j;
- }
- }
- if (!exists && pos >= 0) {
- raw->osds[pos] = to;
- return;
}
}
}
diff --git a/net/compat.c b/net/compat.c
index aba929e..6ded6c8 100644
--- a/net/compat.c
+++ b/net/compat.c
@@ -37,21 +37,16 @@
struct sockaddr __user **save_addr,
struct iovec **iov)
{
- compat_uptr_t uaddr, uiov, tmp3;
- compat_size_t nr_segs;
+ struct compat_msghdr msg;
ssize_t err;
- if (!access_ok(VERIFY_READ, umsg, sizeof(*umsg)) ||
- __get_user(uaddr, &umsg->msg_name) ||
- __get_user(kmsg->msg_namelen, &umsg->msg_namelen) ||
- __get_user(uiov, &umsg->msg_iov) ||
- __get_user(nr_segs, &umsg->msg_iovlen) ||
- __get_user(tmp3, &umsg->msg_control) ||
- __get_user(kmsg->msg_controllen, &umsg->msg_controllen) ||
- __get_user(kmsg->msg_flags, &umsg->msg_flags))
+ if (copy_from_user(&msg, umsg, sizeof(*umsg)))
return -EFAULT;
- if (!uaddr)
+ kmsg->msg_flags = msg.msg_flags;
+ kmsg->msg_namelen = msg.msg_namelen;
+
+ if (!msg.msg_name)
kmsg->msg_namelen = 0;
if (kmsg->msg_namelen < 0)
@@ -59,14 +54,16 @@
if (kmsg->msg_namelen > sizeof(struct sockaddr_storage))
kmsg->msg_namelen = sizeof(struct sockaddr_storage);
- kmsg->msg_control = compat_ptr(tmp3);
+
+ kmsg->msg_control = compat_ptr(msg.msg_control);
+ kmsg->msg_controllen = msg.msg_controllen;
if (save_addr)
- *save_addr = compat_ptr(uaddr);
+ *save_addr = compat_ptr(msg.msg_name);
- if (uaddr && kmsg->msg_namelen) {
+ if (msg.msg_name && kmsg->msg_namelen) {
if (!save_addr) {
- err = move_addr_to_kernel(compat_ptr(uaddr),
+ err = move_addr_to_kernel(compat_ptr(msg.msg_name),
kmsg->msg_namelen,
kmsg->msg_name);
if (err < 0)
@@ -77,13 +74,13 @@
kmsg->msg_namelen = 0;
}
- if (nr_segs > UIO_MAXIOV)
+ if (msg.msg_iovlen > UIO_MAXIOV)
return -EMSGSIZE;
kmsg->msg_iocb = NULL;
return compat_import_iovec(save_addr ? READ : WRITE,
- compat_ptr(uiov), nr_segs,
+ compat_ptr(msg.msg_iov), msg.msg_iovlen,
UIO_FASTIOV, iov, &kmsg->msg_iter);
}
@@ -316,15 +313,15 @@
{
struct compat_sock_fprog __user *fprog32 = (struct compat_sock_fprog __user *)optval;
struct sock_fprog __user *kfprog = compat_alloc_user_space(sizeof(struct sock_fprog));
- compat_uptr_t ptr;
- u16 len;
+ struct compat_sock_fprog f32;
+ struct sock_fprog f;
- if (!access_ok(VERIFY_READ, fprog32, sizeof(*fprog32)) ||
- !access_ok(VERIFY_WRITE, kfprog, sizeof(struct sock_fprog)) ||
- __get_user(len, &fprog32->len) ||
- __get_user(ptr, &fprog32->filter) ||
- __put_user(len, &kfprog->len) ||
- __put_user(compat_ptr(ptr), &kfprog->filter))
+ if (copy_from_user(&f32, fprog32, sizeof(*fprog32)))
+ return NULL;
+ memset(&f, 0, sizeof(f));
+ f.len = f32.len;
+ f.filter = compat_ptr(f32.filter);
+ if (copy_to_user(kfprog, &f, sizeof(struct sock_fprog)))
return NULL;
return kfprog;
diff --git a/net/core/datagram.c b/net/core/datagram.c
index 6877c43..ee5647b 100644
--- a/net/core/datagram.c
+++ b/net/core/datagram.c
@@ -203,7 +203,7 @@
/**
* __skb_try_recv_datagram - Receive a datagram skbuff
* @sk: socket
- * @flags: MSG_ flags
+ * @flags: MSG\_ flags
* @destructor: invoked under the receive lock on successful dequeue
* @peeked: returns non-zero if this packet has been seen before
* @off: an offset in bytes to peek skb from. Returns an offset
@@ -375,7 +375,7 @@
* skb_kill_datagram - Free a datagram skbuff forcibly
* @sk: socket
* @skb: datagram skbuff
- * @flags: MSG_ flags
+ * @flags: MSG\_ flags
*
* This function frees a datagram skbuff that was received by
* skb_recv_datagram. The flags argument must match the one
@@ -809,7 +809,7 @@
* sequenced packet sockets providing the socket receive queue
* is only ever holding data ready to receive.
*
- * Note: when you _don't_ use this routine for this protocol,
+ * Note: when you *don't* use this routine for this protocol,
* and you use a different write policy from sock_writeable()
* then please supply your own write_space callback.
*/
diff --git a/net/core/dev.c b/net/core/dev.c
index 0244051..8515f8f 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -7384,7 +7384,7 @@
BUG_ON(count < 1);
- rx = kvzalloc(sz, GFP_KERNEL | __GFP_REPEAT);
+ rx = kvzalloc(sz, GFP_KERNEL | __GFP_RETRY_MAYFAIL);
if (!rx)
return -ENOMEM;
@@ -7424,7 +7424,7 @@
if (count < 1 || count > 0xffff)
return -EINVAL;
- tx = kvzalloc(sz, GFP_KERNEL | __GFP_REPEAT);
+ tx = kvzalloc(sz, GFP_KERNEL | __GFP_RETRY_MAYFAIL);
if (!tx)
return -ENOMEM;
@@ -7965,7 +7965,7 @@
/* ensure 32-byte alignment of whole construct */
alloc_size += NETDEV_ALIGN - 1;
- p = kvzalloc(alloc_size, GFP_KERNEL | __GFP_REPEAT);
+ p = kvzalloc(alloc_size, GFP_KERNEL | __GFP_RETRY_MAYFAIL);
if (!p)
return NULL;
diff --git a/net/core/dev_ioctl.c b/net/core/dev_ioctl.c
index 82fd4c9..709a4e6 100644
--- a/net/core/dev_ioctl.c
+++ b/net/core/dev_ioctl.c
@@ -28,6 +28,7 @@
if (copy_from_user(&ifr, arg, sizeof(struct ifreq)))
return -EFAULT;
+ ifr.ifr_name[IFNAMSIZ-1] = 0;
error = netdev_get_name(net, ifr.ifr_name, ifr.ifr_ifindex);
if (error)
@@ -262,6 +263,8 @@
return dev_set_mtu(dev, ifr->ifr_mtu);
case SIOCSIFHWADDR:
+ if (dev->addr_len > sizeof(struct sockaddr))
+ return -EINVAL;
return dev_set_mac_address(dev, &ifr->ifr_hwaddr);
case SIOCSIFHWBROADCAST:
@@ -424,6 +427,8 @@
if (copy_from_user(&iwr, arg, sizeof(iwr)))
return -EFAULT;
+ iwr.ifr_name[sizeof(iwr.ifr_name) - 1] = 0;
+
return wext_handle_ioctl(net, &iwr, cmd, arg);
}
diff --git a/net/core/fib_rules.c b/net/core/fib_rules.c
index a0093e1..fdcb1bc 100644
--- a/net/core/fib_rules.c
+++ b/net/core/fib_rules.c
@@ -400,6 +400,7 @@
err = -ENOMEM;
goto errout;
}
+ refcount_set(&rule->refcnt, 1);
rule->fr_net = net;
rule->pref = tb[FRA_PRIORITY] ? nla_get_u32(tb[FRA_PRIORITY])
@@ -517,8 +518,6 @@
last = r;
}
- refcount_set(&rule->refcnt, 1);
-
if (last)
list_add_rcu(&rule->list, &last->list);
else
diff --git a/net/core/filter.c b/net/core/filter.c
index c7f7370..f44fc22 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -2248,7 +2248,7 @@
bpf_skb_net_grow(skb, len_diff_abs);
bpf_compute_data_end(skb);
- return 0;
+ return ret;
}
BPF_CALL_4(bpf_skb_adjust_room, struct sk_buff *, skb, s32, len_diff,
diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index e31fc11..d071362 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -347,8 +347,7 @@
static void neigh_get_hash_rnd(u32 *x)
{
- get_random_bytes(x, sizeof(*x));
- *x |= 1;
+ *x = get_random_u32() | 1;
}
static struct neigh_hash_table *neigh_hash_alloc(unsigned int shift)
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index d3408a6..912731b 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -277,7 +277,7 @@
struct sk_buff *skb = clist;
clist = clist->next;
if (!skb_irq_freeable(skb)) {
- refcount_inc(&skb->users);
+ refcount_set(&skb->users, 1);
dev_kfree_skb_any(skb); /* put this one back */
} else {
__kfree_skb(skb);
@@ -666,7 +666,7 @@
int err;
rtnl_lock();
- if (np->dev_name) {
+ if (np->dev_name[0]) {
struct net *net = current->nsproxy->net_ns;
ndev = __dev_get_by_name(net, np->dev_name);
}
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index d1ba909..9201e36 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -2031,7 +2031,8 @@
struct sockaddr *sa;
int len;
- len = sizeof(sa_family_t) + dev->addr_len;
+ len = sizeof(sa_family_t) + max_t(size_t, dev->addr_len,
+ sizeof(*sa));
sa = kmalloc(len, GFP_KERNEL);
if (!sa) {
err = -ENOMEM;
@@ -4241,6 +4242,7 @@
switch (event) {
case NETDEV_REBOOT:
+ case NETDEV_CHANGEADDR:
case NETDEV_CHANGENAME:
case NETDEV_FEAT_CHANGE:
case NETDEV_BONDING_FAILOVER:
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 8b11341..f990eb8 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -4747,7 +4747,7 @@
gfp_head = gfp_mask;
if (gfp_head & __GFP_DIRECT_RECLAIM)
- gfp_head |= __GFP_REPEAT;
+ gfp_head |= __GFP_RETRY_MAYFAIL;
*errcode = -ENOBUFS;
skb = alloc_skb(header_len, gfp_head);
diff --git a/net/dccp/feat.c b/net/dccp/feat.c
index 1704948..f227f00 100644
--- a/net/dccp/feat.c
+++ b/net/dccp/feat.c
@@ -1471,9 +1471,12 @@
* singleton values (which always leads to failure).
* These settings can still (later) be overridden via sockopts.
*/
- if (ccid_get_builtin_ccids(&tx.val, &tx.len) ||
- ccid_get_builtin_ccids(&rx.val, &rx.len))
+ if (ccid_get_builtin_ccids(&tx.val, &tx.len))
return -ENOBUFS;
+ if (ccid_get_builtin_ccids(&rx.val, &rx.len)) {
+ kfree(tx.val);
+ return -ENOBUFS;
+ }
if (!dccp_feat_prefer(sysctl_dccp_tx_ccid, tx.val, tx.len) ||
!dccp_feat_prefer(sysctl_dccp_rx_ccid, rx.val, rx.len))
diff --git a/net/dccp/input.c b/net/dccp/input.c
index 4a05d78..fa6be97 100644
--- a/net/dccp/input.c
+++ b/net/dccp/input.c
@@ -126,7 +126,7 @@
static u16 dccp_reset_code_convert(const u8 code)
{
- const u16 error_code[] = {
+ static const u16 error_code[] = {
[DCCP_RESET_CODE_CLOSED] = 0, /* normal termination */
[DCCP_RESET_CODE_UNSPECIFIED] = 0, /* nothing known */
[DCCP_RESET_CODE_ABORTED] = ECONNRESET,
diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c
index f85d901..1b202f1 100644
--- a/net/dccp/ipv4.c
+++ b/net/dccp/ipv4.c
@@ -631,6 +631,7 @@
goto drop_and_free;
inet_csk_reqsk_queue_hash_add(sk, req, DCCP_TIMEOUT_INIT);
+ reqsk_put(req);
return 0;
drop_and_free:
diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c
index c376af5..1b58eac 100644
--- a/net/dccp/ipv6.c
+++ b/net/dccp/ipv6.c
@@ -380,6 +380,7 @@
goto drop_and_free;
inet_csk_reqsk_queue_hash_add(sk, req, DCCP_TIMEOUT_INIT);
+ reqsk_put(req);
return 0;
drop_and_free:
diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c
index 56e4609..c442051 100644
--- a/net/dsa/dsa2.c
+++ b/net/dsa/dsa2.c
@@ -509,21 +509,22 @@
dst->cpu_dp->netdev = ethernet_dev;
}
- tag_protocol = ds->ops->get_tag_protocol(ds);
- dst->tag_ops = dsa_resolve_tag_protocol(tag_protocol);
- if (IS_ERR(dst->tag_ops)) {
- dev_warn(ds->dev, "No tagger for this switch\n");
- return PTR_ERR(dst->tag_ops);
- }
-
- dst->rcv = dst->tag_ops->rcv;
-
/* Initialize cpu_port_mask now for drv->setup()
* to have access to a correct value, just like what
* net/dsa/dsa.c::dsa_switch_setup_one does.
*/
ds->cpu_port_mask |= BIT(index);
+ tag_protocol = ds->ops->get_tag_protocol(ds);
+ dst->tag_ops = dsa_resolve_tag_protocol(tag_protocol);
+ if (IS_ERR(dst->tag_ops)) {
+ dev_warn(ds->dev, "No tagger for this switch\n");
+ ds->cpu_port_mask &= ~BIT(index);
+ return PTR_ERR(dst->tag_ops);
+ }
+
+ dst->rcv = dst->tag_ops->rcv;
+
return 0;
}
diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c
index 4e678fa..044d2a1 100644
--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -1334,13 +1334,14 @@
void __init ip_fib_init(void)
{
- rtnl_register(PF_INET, RTM_NEWROUTE, inet_rtm_newroute, NULL, NULL);
- rtnl_register(PF_INET, RTM_DELROUTE, inet_rtm_delroute, NULL, NULL);
- rtnl_register(PF_INET, RTM_GETROUTE, NULL, inet_dump_fib, NULL);
+ fib_trie_init();
register_pernet_subsys(&fib_net_ops);
+
register_netdevice_notifier(&fib_netdev_notifier);
register_inetaddr_notifier(&fib_inetaddr_notifier);
- fib_trie_init();
+ rtnl_register(PF_INET, RTM_NEWROUTE, inet_rtm_newroute, NULL, NULL);
+ rtnl_register(PF_INET, RTM_DELROUTE, inet_rtm_delroute, NULL, NULL);
+ rtnl_register(PF_INET, RTM_GETROUTE, NULL, inet_dump_fib, NULL);
}
diff --git a/net/ipv4/fib_semantics.c b/net/ipv4/fib_semantics.c
index 22210010..b8d1817 100644
--- a/net/ipv4/fib_semantics.c
+++ b/net/ipv4/fib_semantics.c
@@ -1452,7 +1452,7 @@
return call_fib_notifiers(dev_net(fib_nh->nh_dev), event_type,
&info.info);
case FIB_EVENT_NH_DEL:
- if ((IN_DEV_IGNORE_ROUTES_WITH_LINKDOWN(in_dev) &&
+ if ((in_dev && IN_DEV_IGNORE_ROUTES_WITH_LINKDOWN(in_dev) &&
fib_nh->nh_flags & RTNH_F_LINKDOWN) ||
(fib_nh->nh_flags & RTNH_F_DEAD))
return call_fib_notifiers(dev_net(fib_nh->nh_dev),
diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index 7eb252d..50c74cd 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -599,6 +599,7 @@
hlen = iph->ihl * 4;
mtu = mtu - hlen; /* Size of data space */
IPCB(skb)->flags |= IPSKB_FRAG_COMPLETE;
+ ll_rs = LL_RESERVED_SPACE(rt->dst.dev);
/* When frag_list is given, use it. First, check its validity:
* some transformers could create wrong frag_list or break existing
@@ -614,14 +615,15 @@
if (first_len - hlen > mtu ||
((first_len - hlen) & 7) ||
ip_is_fragment(iph) ||
- skb_cloned(skb))
+ skb_cloned(skb) ||
+ skb_headroom(skb) < ll_rs)
goto slow_path;
skb_walk_frags(skb, frag) {
/* Correct geometry. */
if (frag->len > mtu ||
((frag->len & 7) && frag->next) ||
- skb_headroom(frag) < hlen)
+ skb_headroom(frag) < hlen + ll_rs)
goto slow_path_clean;
/* Partially cloned skb? */
@@ -711,8 +713,6 @@
left = skb->len - hlen; /* Space per frame */
ptr = hlen; /* Where to start from */
- ll_rs = LL_RESERVED_SPACE(rt->dst.dev);
-
/*
* Fragment the datagram.
*/
diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c
index bb909f1..06863ea 100644
--- a/net/ipv4/ipmr.c
+++ b/net/ipv4/ipmr.c
@@ -2431,8 +2431,8 @@
tableid = tb[RTA_TABLE] ? nla_get_u32(tb[RTA_TABLE]) : 0;
mrt = ipmr_get_table(net, tableid ? tableid : RT_TABLE_DEFAULT);
- if (IS_ERR(mrt)) {
- err = PTR_ERR(mrt);
+ if (!mrt) {
+ err = -ENOENT;
goto errout_free;
}
diff --git a/net/ipv4/netfilter/nf_tables_arp.c b/net/ipv4/netfilter/nf_tables_arp.c
index 805c8dd..4bbc273 100644
--- a/net/ipv4/netfilter/nf_tables_arp.c
+++ b/net/ipv4/netfilter/nf_tables_arp.c
@@ -72,8 +72,7 @@
.family = NFPROTO_ARP,
.owner = THIS_MODULE,
.hook_mask = (1 << NF_ARP_IN) |
- (1 << NF_ARP_OUT) |
- (1 << NF_ARP_FORWARD),
+ (1 << NF_ARP_OUT),
};
static int __init nf_tables_arp_init(void)
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index c816cd5..0383e66f 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -2979,8 +2979,7 @@
{
atomic_set(&net->ipv4.rt_genid, 0);
atomic_set(&net->fnhe_genid, 0);
- get_random_bytes(&net->ipv4.dev_addr_genid,
- sizeof(net->ipv4.dev_addr_genid));
+ atomic_set(&net->ipv4.dev_addr_genid, get_random_int());
return 0;
}
diff --git a/net/ipv4/syncookies.c b/net/ipv4/syncookies.c
index 0905cf0..03ad877 100644
--- a/net/ipv4/syncookies.c
+++ b/net/ipv4/syncookies.c
@@ -335,6 +335,7 @@
treq->rcv_isn = ntohl(th->seq) - 1;
treq->snt_isn = cookie;
treq->ts_off = 0;
+ treq->txhash = net_tx_rndhash();
req->mss = mss;
ireq->ir_num = ntohs(th->dest);
ireq->ir_rmt_port = th->source;
diff --git a/net/ipv4/tcp_bbr.c b/net/ipv4/tcp_bbr.c
index dbcc935..69ee877 100644
--- a/net/ipv4/tcp_bbr.c
+++ b/net/ipv4/tcp_bbr.c
@@ -112,7 +112,8 @@
cwnd_gain:10, /* current gain for setting cwnd */
full_bw_cnt:3, /* number of rounds without large bw gains */
cycle_idx:3, /* current index in pacing_gain cycle array */
- unused_b:6;
+ has_seen_rtt:1, /* have we seen an RTT sample yet? */
+ unused_b:5;
u32 prior_cwnd; /* prior cwnd upon entering loss recovery */
u32 full_bw; /* recent bw, to estimate if pipe is full */
};
@@ -211,6 +212,35 @@
return rate >> BW_SCALE;
}
+/* Convert a BBR bw and gain factor to a pacing rate in bytes per second. */
+static u32 bbr_bw_to_pacing_rate(struct sock *sk, u32 bw, int gain)
+{
+ u64 rate = bw;
+
+ rate = bbr_rate_bytes_per_sec(sk, rate, gain);
+ rate = min_t(u64, rate, sk->sk_max_pacing_rate);
+ return rate;
+}
+
+/* Initialize pacing rate to: high_gain * init_cwnd / RTT. */
+static void bbr_init_pacing_rate_from_rtt(struct sock *sk)
+{
+ struct tcp_sock *tp = tcp_sk(sk);
+ struct bbr *bbr = inet_csk_ca(sk);
+ u64 bw;
+ u32 rtt_us;
+
+ if (tp->srtt_us) { /* any RTT sample yet? */
+ rtt_us = max(tp->srtt_us >> 3, 1U);
+ bbr->has_seen_rtt = 1;
+ } else { /* no RTT sample yet */
+ rtt_us = USEC_PER_MSEC; /* use nominal default RTT */
+ }
+ bw = (u64)tp->snd_cwnd * BW_UNIT;
+ do_div(bw, rtt_us);
+ sk->sk_pacing_rate = bbr_bw_to_pacing_rate(sk, bw, bbr_high_gain);
+}
+
/* Pace using current bw estimate and a gain factor. In order to help drive the
* network toward lower queues while maintaining high utilization and low
* latency, the average pacing rate aims to be slightly (~1%) lower than the
@@ -220,12 +250,13 @@
*/
static void bbr_set_pacing_rate(struct sock *sk, u32 bw, int gain)
{
+ struct tcp_sock *tp = tcp_sk(sk);
struct bbr *bbr = inet_csk_ca(sk);
- u64 rate = bw;
+ u32 rate = bbr_bw_to_pacing_rate(sk, bw, gain);
- rate = bbr_rate_bytes_per_sec(sk, rate, gain);
- rate = min_t(u64, rate, sk->sk_max_pacing_rate);
- if (bbr->mode != BBR_STARTUP || rate > sk->sk_pacing_rate)
+ if (unlikely(!bbr->has_seen_rtt && tp->srtt_us))
+ bbr_init_pacing_rate_from_rtt(sk);
+ if (bbr_full_bw_reached(sk) || rate > sk->sk_pacing_rate)
sk->sk_pacing_rate = rate;
}
@@ -798,7 +829,6 @@
{
struct tcp_sock *tp = tcp_sk(sk);
struct bbr *bbr = inet_csk_ca(sk);
- u64 bw;
bbr->prior_cwnd = 0;
bbr->tso_segs_goal = 0; /* default segs per skb until first ACK */
@@ -814,11 +844,8 @@
minmax_reset(&bbr->bw, bbr->rtt_cnt, 0); /* init max bw to 0 */
- /* Initialize pacing rate to: high_gain * init_cwnd / RTT. */
- bw = (u64)tp->snd_cwnd * BW_UNIT;
- do_div(bw, (tp->srtt_us >> 3) ? : USEC_PER_MSEC);
- sk->sk_pacing_rate = 0; /* force an update of sk_pacing_rate */
- bbr_set_pacing_rate(sk, bw, bbr_high_gain);
+ bbr->has_seen_rtt = 0;
+ bbr_init_pacing_rate_from_rtt(sk);
bbr->restore_cwnd = 0;
bbr->round_start = 0;
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 4e985de..2f1588b 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -2202,9 +2202,10 @@
static void tcp_chrono_set(struct tcp_sock *tp, const enum tcp_chrono new)
{
const u32 now = tcp_jiffies32;
+ enum tcp_chrono old = tp->chrono_type;
- if (tp->chrono_type > TCP_CHRONO_UNSPEC)
- tp->chrono_stat[tp->chrono_type - 1] += now - tp->chrono_start;
+ if (old > TCP_CHRONO_UNSPEC)
+ tp->chrono_stat[old - 1] += now - tp->chrono_start;
tp->chrono_start = now;
tp->chrono_type = new;
}
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index 25294d4..e6276fa 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -1163,34 +1163,32 @@
return ret;
}
-#if BITS_PER_LONG == 64
+#define UDP_SKB_IS_STATELESS 0x80000000
+
static void udp_set_dev_scratch(struct sk_buff *skb)
{
- struct udp_dev_scratch *scratch;
+ struct udp_dev_scratch *scratch = udp_skb_scratch(skb);
BUILD_BUG_ON(sizeof(struct udp_dev_scratch) > sizeof(long));
- scratch = (struct udp_dev_scratch *)&skb->dev_scratch;
- scratch->truesize = skb->truesize;
+ scratch->_tsize_state = skb->truesize;
+#if BITS_PER_LONG == 64
scratch->len = skb->len;
scratch->csum_unnecessary = !!skb_csum_unnecessary(skb);
scratch->is_linear = !skb_is_nonlinear(skb);
-}
-
-static int udp_skb_truesize(struct sk_buff *skb)
-{
- return ((struct udp_dev_scratch *)&skb->dev_scratch)->truesize;
-}
-#else
-static void udp_set_dev_scratch(struct sk_buff *skb)
-{
- skb->dev_scratch = skb->truesize;
-}
-
-static int udp_skb_truesize(struct sk_buff *skb)
-{
- return skb->dev_scratch;
-}
#endif
+ if (likely(!skb->_skb_refdst))
+ scratch->_tsize_state |= UDP_SKB_IS_STATELESS;
+}
+
+static int udp_skb_truesize(struct sk_buff *skb)
+{
+ return udp_skb_scratch(skb)->_tsize_state & ~UDP_SKB_IS_STATELESS;
+}
+
+static bool udp_skb_has_head_state(struct sk_buff *skb)
+{
+ return !(udp_skb_scratch(skb)->_tsize_state & UDP_SKB_IS_STATELESS);
+}
/* fully reclaim rmem/fwd memory allocated for skb */
static void udp_rmem_release(struct sock *sk, int size, int partial,
@@ -1388,6 +1386,11 @@
unlock_sock_fast(sk, slow);
}
+ /* In the more common cases we cleared the head states previously,
+ * see __udp_queue_rcv_skb().
+ */
+ if (unlikely(udp_skb_has_head_state(skb)))
+ skb_release_head_state(skb);
consume_stateless_skb(skb);
}
EXPORT_SYMBOL_GPL(skb_consume_udp);
@@ -1779,8 +1782,12 @@
sk_mark_napi_id_once(sk, skb);
}
- /* clear all pending head states while they are hot in the cache */
- skb_release_head_state(skb);
+ /* At recvmsg() time we may access skb->dst or skb->sp depending on
+ * the IP options and the cmsg flags, elsewhere can we clear all
+ * pending head states while they are hot in the cache
+ */
+ if (likely(IPCB(skb)->opt.optlen == 0 && !skb_sec_path(skb)))
+ skb_release_head_state(skb);
rc = __udp_enqueue_schedule_skb(sk, skb);
if (rc < 0) {
@@ -1921,7 +1928,7 @@
/* For TCP sockets, sk_rx_dst is protected by socket lock
* For UDP, we use xchg() to guard against concurrent changes.
*/
-static void udp_sk_rx_dst_set(struct sock *sk, struct dst_entry *dst)
+void udp_sk_rx_dst_set(struct sock *sk, struct dst_entry *dst)
{
struct dst_entry *old;
@@ -1930,6 +1937,7 @@
dst_release(old);
}
}
+EXPORT_SYMBOL(udp_sk_rx_dst_set);
/*
* Multicasts and broadcasts go to each listener.
diff --git a/net/ipv6/exthdrs.c b/net/ipv6/exthdrs.c
index 4996d73..3cec529 100644
--- a/net/ipv6/exthdrs.c
+++ b/net/ipv6/exthdrs.c
@@ -756,6 +756,7 @@
if (pskb_trim_rcsum(skb, pkt_len + sizeof(struct ipv6hdr)))
goto drop;
+ IP6CB(skb)->flags |= IP6SKB_JUMBOGRAM;
return true;
drop:
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 1422d6c..162efba 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -673,8 +673,6 @@
*prevhdr = NEXTHDR_FRAGMENT;
tmp_hdr = kmemdup(skb_network_header(skb), hlen, GFP_ATOMIC);
if (!tmp_hdr) {
- IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)),
- IPSTATS_MIB_FRAGFAILS);
err = -ENOMEM;
goto fail;
}
@@ -789,8 +787,6 @@
frag = alloc_skb(len + hlen + sizeof(struct frag_hdr) +
hroom + troom, GFP_ATOMIC);
if (!frag) {
- IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)),
- IPSTATS_MIB_FRAGFAILS);
err = -ENOMEM;
goto fail;
}
diff --git a/net/ipv6/output_core.c b/net/ipv6/output_core.c
index e9065b8..abb2c30 100644
--- a/net/ipv6/output_core.c
+++ b/net/ipv6/output_core.c
@@ -78,7 +78,7 @@
int ip6_find_1stfragopt(struct sk_buff *skb, u8 **nexthdr)
{
- u16 offset = sizeof(struct ipv6hdr);
+ unsigned int offset = sizeof(struct ipv6hdr);
unsigned int packet_len = skb_tail_pointer(skb) -
skb_network_header(skb);
int found_rhdr = 0;
@@ -86,6 +86,7 @@
while (offset <= packet_len) {
struct ipv6_opt_hdr *exthdr;
+ unsigned int len;
switch (**nexthdr) {
@@ -111,7 +112,10 @@
exthdr = (struct ipv6_opt_hdr *)(skb_network_header(skb) +
offset);
- offset += ipv6_optlen(exthdr);
+ len = ipv6_optlen(exthdr);
+ if (len + offset >= IPV6_MAXPLEN)
+ return -EINVAL;
+ offset += len;
*nexthdr = &exthdr->nexthdr;
}
diff --git a/net/ipv6/syncookies.c b/net/ipv6/syncookies.c
index 7b75b06..4e7817a 100644
--- a/net/ipv6/syncookies.c
+++ b/net/ipv6/syncookies.c
@@ -216,6 +216,7 @@
treq->rcv_isn = ntohl(th->seq) - 1;
treq->snt_isn = cookie;
treq->ts_off = 0;
+ treq->txhash = net_tx_rndhash();
/*
* We need to lookup the dst_entry to get the correct window size.
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index 4a3e656..578142b 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -291,11 +291,7 @@
struct udp_table *udptable)
{
const struct ipv6hdr *iph = ipv6_hdr(skb);
- struct sock *sk;
- sk = skb_steal_sock(skb);
- if (unlikely(sk))
- return sk;
return __udp6_lib_lookup(dev_net(skb->dev), &iph->saddr, sport,
&iph->daddr, dport, inet6_iif(skb),
udptable, skb);
@@ -332,6 +328,15 @@
EXPORT_SYMBOL_GPL(udp6_lib_lookup);
#endif
+/* do not use the scratch area len for jumbogram: their length execeeds the
+ * scratch area space; note that the IP6CB flags is still in the first
+ * cacheline, so checking for jumbograms is cheap
+ */
+static int udp6_skb_len(struct sk_buff *skb)
+{
+ return unlikely(inet6_is_jumbogram(skb)) ? skb->len : udp_skb_len(skb);
+}
+
/*
* This should be easy, if there is something there we
* return it, otherwise we block.
@@ -362,7 +367,7 @@
if (!skb)
return err;
- ulen = udp_skb_len(skb);
+ ulen = udp6_skb_len(skb);
copied = len;
if (copied > ulen - off)
copied = ulen - off;
@@ -804,6 +809,24 @@
if (udp6_csum_init(skb, uh, proto))
goto csum_error;
+ /* Check if the socket is already available, e.g. due to early demux */
+ sk = skb_steal_sock(skb);
+ if (sk) {
+ struct dst_entry *dst = skb_dst(skb);
+ int ret;
+
+ if (unlikely(sk->sk_rx_dst != dst))
+ udp_sk_rx_dst_set(sk, dst);
+
+ ret = udpv6_queue_rcv_skb(sk, skb);
+ sock_put(sk);
+
+ /* a return value > 0 means to resubmit the input */
+ if (ret > 0)
+ return ret;
+ return 0;
+ }
+
/*
* Multicast receive code
*/
@@ -812,11 +835,6 @@
saddr, daddr, udptable, proto);
/* Unicast */
-
- /*
- * check socket cache ... must talk to Alan about his plans
- * for sock caches... i'll skip this for now.
- */
sk = __udp6_lib_lookup_skb(skb, uh->source, uh->dest, udptable);
if (sk) {
int ret;
diff --git a/net/netfilter/core.c b/net/netfilter/core.c
index 552d606..974cf2a 100644
--- a/net/netfilter/core.c
+++ b/net/netfilter/core.c
@@ -227,114 +227,6 @@
}
EXPORT_SYMBOL(nf_unregister_net_hooks);
-static LIST_HEAD(nf_hook_list);
-
-static int _nf_register_hook(struct nf_hook_ops *reg)
-{
- struct net *net, *last;
- int ret;
-
- for_each_net(net) {
- ret = nf_register_net_hook(net, reg);
- if (ret && ret != -ENOENT)
- goto rollback;
- }
- list_add_tail(®->list, &nf_hook_list);
-
- return 0;
-rollback:
- last = net;
- for_each_net(net) {
- if (net == last)
- break;
- nf_unregister_net_hook(net, reg);
- }
- return ret;
-}
-
-int nf_register_hook(struct nf_hook_ops *reg)
-{
- int ret;
-
- rtnl_lock();
- ret = _nf_register_hook(reg);
- rtnl_unlock();
-
- return ret;
-}
-EXPORT_SYMBOL(nf_register_hook);
-
-static void _nf_unregister_hook(struct nf_hook_ops *reg)
-{
- struct net *net;
-
- list_del(®->list);
- for_each_net(net)
- nf_unregister_net_hook(net, reg);
-}
-
-void nf_unregister_hook(struct nf_hook_ops *reg)
-{
- rtnl_lock();
- _nf_unregister_hook(reg);
- rtnl_unlock();
-}
-EXPORT_SYMBOL(nf_unregister_hook);
-
-int nf_register_hooks(struct nf_hook_ops *reg, unsigned int n)
-{
- unsigned int i;
- int err = 0;
-
- for (i = 0; i < n; i++) {
- err = nf_register_hook(®[i]);
- if (err)
- goto err;
- }
- return err;
-
-err:
- if (i > 0)
- nf_unregister_hooks(reg, i);
- return err;
-}
-EXPORT_SYMBOL(nf_register_hooks);
-
-/* Caller MUST take rtnl_lock() */
-int _nf_register_hooks(struct nf_hook_ops *reg, unsigned int n)
-{
- unsigned int i;
- int err = 0;
-
- for (i = 0; i < n; i++) {
- err = _nf_register_hook(®[i]);
- if (err)
- goto err;
- }
- return err;
-
-err:
- if (i > 0)
- _nf_unregister_hooks(reg, i);
- return err;
-}
-EXPORT_SYMBOL(_nf_register_hooks);
-
-void nf_unregister_hooks(struct nf_hook_ops *reg, unsigned int n)
-{
- while (n-- > 0)
- nf_unregister_hook(®[n]);
-}
-EXPORT_SYMBOL(nf_unregister_hooks);
-
-/* Caller MUST take rtnl_lock */
-void _nf_unregister_hooks(struct nf_hook_ops *reg, unsigned int n)
-{
- while (n-- > 0)
- _nf_unregister_hook(®[n]);
-}
-EXPORT_SYMBOL(_nf_unregister_hooks);
-
/* Returns 1 if okfn() needs to be executed by the caller,
* -EPERM for NF_DROP, 0 otherwise. Caller must hold rcu_read_lock. */
int nf_hook_slow(struct sk_buff *skb, struct nf_hook_state *state,
@@ -450,40 +342,9 @@
EXPORT_SYMBOL(nf_nat_decode_session_hook);
#endif
-static int nf_register_hook_list(struct net *net)
-{
- struct nf_hook_ops *elem;
- int ret;
-
- rtnl_lock();
- list_for_each_entry(elem, &nf_hook_list, list) {
- ret = nf_register_net_hook(net, elem);
- if (ret && ret != -ENOENT)
- goto out_undo;
- }
- rtnl_unlock();
- return 0;
-
-out_undo:
- list_for_each_entry_continue_reverse(elem, &nf_hook_list, list)
- nf_unregister_net_hook(net, elem);
- rtnl_unlock();
- return ret;
-}
-
-static void nf_unregister_hook_list(struct net *net)
-{
- struct nf_hook_ops *elem;
-
- rtnl_lock();
- list_for_each_entry(elem, &nf_hook_list, list)
- nf_unregister_net_hook(net, elem);
- rtnl_unlock();
-}
-
static int __net_init netfilter_net_init(struct net *net)
{
- int i, h, ret;
+ int i, h;
for (i = 0; i < ARRAY_SIZE(net->nf.hooks); i++) {
for (h = 0; h < NF_MAX_HOOKS; h++)
@@ -500,16 +361,12 @@
return -ENOMEM;
}
#endif
- ret = nf_register_hook_list(net);
- if (ret)
- remove_proc_entry("netfilter", net->proc_net);
- return ret;
+ return 0;
}
static void __net_exit netfilter_net_exit(struct net *net)
{
- nf_unregister_hook_list(net);
remove_proc_entry("netfilter", net->proc_net);
}
diff --git a/net/netfilter/nf_conntrack_expect.c b/net/netfilter/nf_conntrack_expect.c
index e03d16e..899c2c3 100644
--- a/net/netfilter/nf_conntrack_expect.c
+++ b/net/netfilter/nf_conntrack_expect.c
@@ -422,7 +422,7 @@
h = nf_ct_expect_dst_hash(net, &expect->tuple);
hlist_for_each_entry_safe(i, next, &nf_ct_expect_hash[h], hnode) {
if (expect_matches(i, expect)) {
- if (nf_ct_remove_expect(expect))
+ if (nf_ct_remove_expect(i))
break;
} else if (expect_clash(i, expect)) {
ret = -EBUSY;
diff --git a/net/netfilter/nf_nat_core.c b/net/netfilter/nf_nat_core.c
index 832c5a0..eb54178 100644
--- a/net/netfilter/nf_nat_core.c
+++ b/net/netfilter/nf_nat_core.c
@@ -222,20 +222,21 @@
.tuple = tuple,
.zone = zone
};
- struct rhlist_head *hl;
+ struct rhlist_head *hl, *h;
hl = rhltable_lookup(&nf_nat_bysource_table, &key,
nf_nat_bysource_params);
- if (!hl)
- return 0;
- ct = container_of(hl, typeof(*ct), nat_bysource);
+ rhl_for_each_entry_rcu(ct, h, hl, nat_bysource) {
+ nf_ct_invert_tuplepr(result,
+ &ct->tuplehash[IP_CT_DIR_REPLY].tuple);
+ result->dst = tuple->dst;
- nf_ct_invert_tuplepr(result,
- &ct->tuplehash[IP_CT_DIR_REPLY].tuple);
- result->dst = tuple->dst;
+ if (in_range(l3proto, l4proto, result, range))
+ return 1;
+ }
- return in_range(l3proto, l4proto, result, range);
+ return 0;
}
/* For [FUTURE] fragmentation handling, we want the least-used
diff --git a/net/netfilter/nfnetlink.c b/net/netfilter/nfnetlink.c
index 92b05e18..733d3e4 100644
--- a/net/netfilter/nfnetlink.c
+++ b/net/netfilter/nfnetlink.c
@@ -472,8 +472,7 @@
if (msglen > skb->len)
msglen = skb->len;
- if (nlh->nlmsg_len < NLMSG_HDRLEN ||
- skb->len < NLMSG_HDRLEN + sizeof(struct nfgenmsg))
+ if (skb->len < NLMSG_HDRLEN + sizeof(struct nfgenmsg))
return;
err = nla_parse(cda, NFNL_BATCH_MAX, attr, attrlen, nfnl_batch_policy,
@@ -500,7 +499,8 @@
{
struct nlmsghdr *nlh = nlmsg_hdr(skb);
- if (nlh->nlmsg_len < NLMSG_HDRLEN ||
+ if (skb->len < NLMSG_HDRLEN ||
+ nlh->nlmsg_len < NLMSG_HDRLEN ||
skb->len < nlh->nlmsg_len)
return;
diff --git a/net/netfilter/x_tables.c b/net/netfilter/x_tables.c
index 1770c1d..e164823 100644
--- a/net/netfilter/x_tables.c
+++ b/net/netfilter/x_tables.c
@@ -1003,14 +1003,10 @@
if ((SMP_ALIGN(size) >> PAGE_SHIFT) + 2 > totalram_pages)
return NULL;
- if (sz <= (PAGE_SIZE << PAGE_ALLOC_COSTLY_ORDER))
- info = kmalloc(sz, GFP_KERNEL | __GFP_NOWARN | __GFP_NORETRY);
- if (!info) {
- info = __vmalloc(sz, GFP_KERNEL | __GFP_NOWARN | __GFP_NORETRY,
- PAGE_KERNEL);
- if (!info)
- return NULL;
- }
+ info = kvmalloc(sz, GFP_KERNEL);
+ if (!info)
+ return NULL;
+
memset(info, 0, sizeof(*info));
info->size = size;
return info;
diff --git a/net/openvswitch/conntrack.c b/net/openvswitch/conntrack.c
index 08679eb..03859e3 100644
--- a/net/openvswitch/conntrack.c
+++ b/net/openvswitch/conntrack.c
@@ -629,6 +629,34 @@
return ct;
}
+static
+struct nf_conn *ovs_ct_executed(struct net *net,
+ const struct sw_flow_key *key,
+ const struct ovs_conntrack_info *info,
+ struct sk_buff *skb,
+ bool *ct_executed)
+{
+ struct nf_conn *ct = NULL;
+
+ /* If no ct, check if we have evidence that an existing conntrack entry
+ * might be found for this skb. This happens when we lose a skb->_nfct
+ * due to an upcall, or if the direction is being forced. If the
+ * connection was not confirmed, it is not cached and needs to be run
+ * through conntrack again.
+ */
+ *ct_executed = (key->ct_state & OVS_CS_F_TRACKED) &&
+ !(key->ct_state & OVS_CS_F_INVALID) &&
+ (key->ct_zone == info->zone.id);
+
+ if (*ct_executed || (!key->ct_state && info->force)) {
+ ct = ovs_ct_find_existing(net, &info->zone, info->family, skb,
+ !!(key->ct_state &
+ OVS_CS_F_NAT_MASK));
+ }
+
+ return ct;
+}
+
/* Determine whether skb->_nfct is equal to the result of conntrack lookup. */
static bool skb_nfct_cached(struct net *net,
const struct sw_flow_key *key,
@@ -637,24 +665,17 @@
{
enum ip_conntrack_info ctinfo;
struct nf_conn *ct;
+ bool ct_executed = true;
ct = nf_ct_get(skb, &ctinfo);
- /* If no ct, check if we have evidence that an existing conntrack entry
- * might be found for this skb. This happens when we lose a skb->_nfct
- * due to an upcall. If the connection was not confirmed, it is not
- * cached and needs to be run through conntrack again.
- */
- if (!ct && key->ct_state & OVS_CS_F_TRACKED &&
- !(key->ct_state & OVS_CS_F_INVALID) &&
- key->ct_zone == info->zone.id) {
- ct = ovs_ct_find_existing(net, &info->zone, info->family, skb,
- !!(key->ct_state
- & OVS_CS_F_NAT_MASK));
- if (ct)
- nf_ct_get(skb, &ctinfo);
- }
if (!ct)
+ ct = ovs_ct_executed(net, key, info, skb, &ct_executed);
+
+ if (ct)
+ nf_ct_get(skb, &ctinfo);
+ else
return false;
+
if (!net_eq(net, read_pnet(&ct->ct_net)))
return false;
if (!nf_ct_zone_equal_any(info->ct, nf_ct_zone(ct)))
@@ -679,7 +700,7 @@
return false;
}
- return true;
+ return ct_executed;
}
#ifdef CONFIG_NF_NAT_NEEDED
@@ -1289,8 +1310,8 @@
nla_for_each_nested(a, attr, rem) {
int type = nla_type(a);
- int maxlen = ovs_ct_attr_lens[type].maxlen;
- int minlen = ovs_ct_attr_lens[type].minlen;
+ int maxlen;
+ int minlen;
if (type > OVS_CT_ATTR_MAX) {
OVS_NLERR(log,
@@ -1298,6 +1319,9 @@
type, OVS_CT_ATTR_MAX);
return -EINVAL;
}
+
+ maxlen = ovs_ct_attr_lens[type].maxlen;
+ minlen = ovs_ct_attr_lens[type].minlen;
if (nla_len(a) < minlen || nla_len(a) > maxlen) {
OVS_NLERR(log,
"Conntrack attr type has unexpected length (type=%d, length=%d, expected=%d)",
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index e3beb28..0615c2a 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -214,6 +214,7 @@
static void prb_fill_vlan_info(struct tpacket_kbdq_core *,
struct tpacket3_hdr *);
static void packet_flush_mclist(struct sock *sk);
+static void packet_pick_tx_queue(struct net_device *dev, struct sk_buff *skb);
struct packet_skb_cb {
union {
@@ -260,6 +261,7 @@
if (skb != orig_skb)
goto drop;
+ packet_pick_tx_queue(dev, skb);
txq = skb_get_tx_queue(dev, skb);
local_bh_disable();
@@ -2747,8 +2749,6 @@
goto tpacket_error;
}
- packet_pick_tx_queue(dev, skb);
-
skb->destructor = tpacket_destruct_skb;
__packet_set_status(po, ph, TP_STATUS_SENDING);
packet_inc_pending(&po->tx_ring);
@@ -2931,8 +2931,6 @@
skb->priority = sk->sk_priority;
skb->mark = sockc.mark;
- packet_pick_tx_queue(dev, skb);
-
if (po->has_vnet_hdr) {
err = virtio_net_hdr_to_skb(skb, &vnet_hdr, vio_le());
if (err)
@@ -4331,7 +4329,7 @@
register_prot_hook(sk);
}
spin_unlock(&po->bind_lock);
- if (closing && (po->tp_version > TPACKET_V2)) {
+ if (pg_vec && (po->tp_version > TPACKET_V2)) {
/* Because we don't support block-based V3 on tx-ring */
if (!tx_ring)
prb_shutdown_retire_blk_timer(po, rb_queue);
diff --git a/net/rds/send.c b/net/rds/send.c
index e81aa17..41b9f0f 100644
--- a/net/rds/send.c
+++ b/net/rds/send.c
@@ -170,8 +170,8 @@
* The acquire_in_xmit() check above ensures that only one
* caller can increment c_send_gen at any time.
*/
- cp->cp_send_gen++;
- send_gen = cp->cp_send_gen;
+ send_gen = READ_ONCE(cp->cp_send_gen) + 1;
+ WRITE_ONCE(cp->cp_send_gen, send_gen);
/*
* rds_conn_shutdown() sets the conn state and then tests RDS_IN_XMIT,
@@ -431,7 +431,7 @@
smp_mb();
if ((test_bit(0, &conn->c_map_queued) ||
!list_empty(&cp->cp_send_queue)) &&
- send_gen == cp->cp_send_gen) {
+ send_gen == READ_ONCE(cp->cp_send_gen)) {
rds_stats_inc(s_send_lock_queue_raced);
if (batch_count < send_batch_count)
goto restart;
diff --git a/net/sched/act_api.c b/net/sched/act_api.c
index aed6cf2..f2e9ed3 100644
--- a/net/sched/act_api.c
+++ b/net/sched/act_api.c
@@ -835,7 +835,7 @@
}
static int
-act_get_notify(struct net *net, u32 portid, struct nlmsghdr *n,
+tcf_get_notify(struct net *net, u32 portid, struct nlmsghdr *n,
struct list_head *actions, int event)
{
struct sk_buff *skb;
@@ -1018,7 +1018,7 @@
}
if (event == RTM_GETACTION)
- ret = act_get_notify(net, portid, n, &actions, event);
+ ret = tcf_get_notify(net, portid, n, &actions, event);
else { /* delete */
ret = tcf_del_notify(net, n, &actions, portid);
if (ret)
diff --git a/net/sched/sch_fq.c b/net/sched/sch_fq.c
index 147fde7..263d16e 100644
--- a/net/sched/sch_fq.c
+++ b/net/sched/sch_fq.c
@@ -648,7 +648,7 @@
return 0;
/* If XPS was setup, we can allocate memory on right NUMA node */
- array = kvmalloc_node(sizeof(struct rb_root) << log, GFP_KERNEL | __GFP_REPEAT,
+ array = kvmalloc_node(sizeof(struct rb_root) << log, GFP_KERNEL | __GFP_RETRY_MAYFAIL,
netdev_queue_numa_node_read(sch->dev_queue));
if (!array)
return -ENOMEM;
diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index 4e16b02..6110447 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -228,7 +228,7 @@
sctp_adaptation_ind_param_t aiparam;
sctp_supported_ext_param_t ext_param;
int num_ext = 0;
- __u8 extensions[3];
+ __u8 extensions[4];
struct sctp_paramhdr *auth_chunks = NULL,
*auth_hmacs = NULL;
@@ -396,7 +396,7 @@
sctp_adaptation_ind_param_t aiparam;
sctp_supported_ext_param_t ext_param;
int num_ext = 0;
- __u8 extensions[3];
+ __u8 extensions[4];
struct sctp_paramhdr *auth_chunks = NULL,
*auth_hmacs = NULL,
*auth_random = NULL;
diff --git a/net/socket.c b/net/socket.c
index 59e902b..ad22df1 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -1910,22 +1910,18 @@
struct sockaddr __user **save_addr,
struct iovec **iov)
{
- struct sockaddr __user *uaddr;
- struct iovec __user *uiov;
- size_t nr_segs;
+ struct user_msghdr msg;
ssize_t err;
- if (!access_ok(VERIFY_READ, umsg, sizeof(*umsg)) ||
- __get_user(uaddr, &umsg->msg_name) ||
- __get_user(kmsg->msg_namelen, &umsg->msg_namelen) ||
- __get_user(uiov, &umsg->msg_iov) ||
- __get_user(nr_segs, &umsg->msg_iovlen) ||
- __get_user(kmsg->msg_control, &umsg->msg_control) ||
- __get_user(kmsg->msg_controllen, &umsg->msg_controllen) ||
- __get_user(kmsg->msg_flags, &umsg->msg_flags))
+ if (copy_from_user(&msg, umsg, sizeof(*umsg)))
return -EFAULT;
- if (!uaddr)
+ kmsg->msg_control = (void __force *)msg.msg_control;
+ kmsg->msg_controllen = msg.msg_controllen;
+ kmsg->msg_flags = msg.msg_flags;
+
+ kmsg->msg_namelen = msg.msg_namelen;
+ if (!msg.msg_name)
kmsg->msg_namelen = 0;
if (kmsg->msg_namelen < 0)
@@ -1935,11 +1931,12 @@
kmsg->msg_namelen = sizeof(struct sockaddr_storage);
if (save_addr)
- *save_addr = uaddr;
+ *save_addr = msg.msg_name;
- if (uaddr && kmsg->msg_namelen) {
+ if (msg.msg_name && kmsg->msg_namelen) {
if (!save_addr) {
- err = move_addr_to_kernel(uaddr, kmsg->msg_namelen,
+ err = move_addr_to_kernel(msg.msg_name,
+ kmsg->msg_namelen,
kmsg->msg_name);
if (err < 0)
return err;
@@ -1949,12 +1946,13 @@
kmsg->msg_namelen = 0;
}
- if (nr_segs > UIO_MAXIOV)
+ if (msg.msg_iovlen > UIO_MAXIOV)
return -EMSGSIZE;
kmsg->msg_iocb = NULL;
- return import_iovec(save_addr ? READ : WRITE, uiov, nr_segs,
+ return import_iovec(save_addr ? READ : WRITE,
+ msg.msg_iov, msg.msg_iovlen,
UIO_FASTIOV, iov, &kmsg->msg_iter);
}
diff --git a/net/sunrpc/auth_gss/gss_krb5_crypto.c b/net/sunrpc/auth_gss/gss_krb5_crypto.c
index fb39284..12649c9 100644
--- a/net/sunrpc/auth_gss/gss_krb5_crypto.c
+++ b/net/sunrpc/auth_gss/gss_krb5_crypto.c
@@ -34,6 +34,7 @@
* WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
*/
+#include <crypto/algapi.h>
#include <crypto/hash.h>
#include <crypto/skcipher.h>
#include <linux/err.h>
@@ -927,7 +928,7 @@
if (ret)
goto out_err;
- if (memcmp(pkt_hmac, our_hmac, kctx->gk5e->cksumlength) != 0) {
+ if (crypto_memneq(pkt_hmac, our_hmac, kctx->gk5e->cksumlength) != 0) {
ret = GSS_S_BAD_SIG;
goto out_err;
}
diff --git a/net/sunrpc/auth_gss/gss_rpc_upcall.c b/net/sunrpc/auth_gss/gss_rpc_upcall.c
index f0c6a8c..46b295e 100644
--- a/net/sunrpc/auth_gss/gss_rpc_upcall.c
+++ b/net/sunrpc/auth_gss/gss_rpc_upcall.c
@@ -55,15 +55,15 @@
#define PROC(proc, name) \
[GSSX_##proc] = { \
.p_proc = GSSX_##proc, \
- .p_encode = (kxdreproc_t)gssx_enc_##name, \
- .p_decode = (kxdrdproc_t)gssx_dec_##name, \
+ .p_encode = gssx_enc_##name, \
+ .p_decode = gssx_dec_##name, \
.p_arglen = GSSX_ARG_##name##_sz, \
.p_replen = GSSX_RES_##name##_sz, \
.p_statidx = GSSX_##proc, \
.p_name = #proc, \
}
-static struct rpc_procinfo gssp_procedures[] = {
+static const struct rpc_procinfo gssp_procedures[] = {
PROC(INDICATE_MECHS, indicate_mechs),
PROC(GET_CALL_CONTEXT, get_call_context),
PROC(IMPORT_AND_CANON_NAME, import_and_canon_name),
@@ -364,11 +364,12 @@
/*
* Initialization stuff
*/
-
+static unsigned int gssp_version1_counts[ARRAY_SIZE(gssp_procedures)];
static const struct rpc_version gssp_version1 = {
.number = GSSPROXY_VERS_1,
.nrprocs = ARRAY_SIZE(gssp_procedures),
.procs = gssp_procedures,
+ .counts = gssp_version1_counts,
};
static const struct rpc_version *gssp_version[] = {
diff --git a/net/sunrpc/auth_gss/gss_rpc_xdr.c b/net/sunrpc/auth_gss/gss_rpc_xdr.c
index 25d9a9c..c4778ca 100644
--- a/net/sunrpc/auth_gss/gss_rpc_xdr.c
+++ b/net/sunrpc/auth_gss/gss_rpc_xdr.c
@@ -44,7 +44,7 @@
}
static int gssx_enc_buffer(struct xdr_stream *xdr,
- gssx_buffer *buf)
+ const gssx_buffer *buf)
{
__be32 *p;
@@ -56,7 +56,7 @@
}
static int gssx_enc_in_token(struct xdr_stream *xdr,
- struct gssp_in_token *in)
+ const struct gssp_in_token *in)
{
__be32 *p;
@@ -130,7 +130,7 @@
}
static int dummy_enc_opt_array(struct xdr_stream *xdr,
- struct gssx_option_array *oa)
+ const struct gssx_option_array *oa)
{
__be32 *p;
@@ -348,7 +348,7 @@
}
static int gssx_enc_call_ctx(struct xdr_stream *xdr,
- struct gssx_call_ctx *ctx)
+ const struct gssx_call_ctx *ctx)
{
struct gssx_option opt;
__be32 *p;
@@ -733,8 +733,9 @@
void gssx_enc_accept_sec_context(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct gssx_arg_accept_sec_context *arg)
+ const void *data)
{
+ const struct gssx_arg_accept_sec_context *arg = data;
int err;
err = gssx_enc_call_ctx(xdr, &arg->call_ctx);
@@ -789,8 +790,9 @@
int gssx_dec_accept_sec_context(struct rpc_rqst *rqstp,
struct xdr_stream *xdr,
- struct gssx_res_accept_sec_context *res)
+ void *data)
{
+ struct gssx_res_accept_sec_context *res = data;
u32 value_follows;
int err;
struct page *scratch;
diff --git a/net/sunrpc/auth_gss/gss_rpc_xdr.h b/net/sunrpc/auth_gss/gss_rpc_xdr.h
index 9d88c62..146c310 100644
--- a/net/sunrpc/auth_gss/gss_rpc_xdr.h
+++ b/net/sunrpc/auth_gss/gss_rpc_xdr.h
@@ -179,10 +179,10 @@
#define gssx_dec_init_sec_context NULL
void gssx_enc_accept_sec_context(struct rpc_rqst *req,
struct xdr_stream *xdr,
- struct gssx_arg_accept_sec_context *args);
+ const void *data);
int gssx_dec_accept_sec_context(struct rpc_rqst *rqstp,
struct xdr_stream *xdr,
- struct gssx_res_accept_sec_context *res);
+ void *data);
#define gssx_enc_release_handle NULL
#define gssx_dec_release_handle NULL
#define gssx_enc_get_mic NULL
diff --git a/net/sunrpc/auth_gss/svcauth_gss.c b/net/sunrpc/auth_gss/svcauth_gss.c
index a54a7a3..7b1ee5a 100644
--- a/net/sunrpc/auth_gss/svcauth_gss.c
+++ b/net/sunrpc/auth_gss/svcauth_gss.c
@@ -838,6 +838,14 @@
struct xdr_netobj mic;
struct xdr_buf integ_buf;
+ /* NFS READ normally uses splice to send data in-place. However
+ * the data in cache can change after the reply's MIC is computed
+ * but before the RPC reply is sent. To prevent the client from
+ * rejecting the server-computed MIC in this somewhat rare case,
+ * do not use splice with the GSS integrity service.
+ */
+ clear_bit(RQ_SPLICE_OK, &rqstp->rq_flags);
+
/* Did we already verify the signature on the original pass through? */
if (rqstp->rq_deferred)
return 0;
diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
index b5cb921..2e49d1f 100644
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -1517,14 +1517,16 @@
call_start(struct rpc_task *task)
{
struct rpc_clnt *clnt = task->tk_client;
+ int idx = task->tk_msg.rpc_proc->p_statidx;
dprintk("RPC: %5u call_start %s%d proc %s (%s)\n", task->tk_pid,
clnt->cl_program->name, clnt->cl_vers,
rpc_proc_name(task),
(RPC_IS_ASYNC(task) ? "async" : "sync"));
- /* Increment call count */
- task->tk_msg.rpc_proc->p_count++;
+ /* Increment call count (version might not be valid for ping) */
+ if (clnt->cl_program->version[clnt->cl_vers])
+ clnt->cl_program->version[clnt->cl_vers]->counts[idx]++;
clnt->cl_stats->rpccnt++;
task->tk_action = call_reserve;
}
@@ -1672,7 +1674,7 @@
unsigned int slack = task->tk_rqstp->rq_cred->cr_auth->au_cslack;
struct rpc_rqst *req = task->tk_rqstp;
struct rpc_xprt *xprt = req->rq_xprt;
- struct rpc_procinfo *proc = task->tk_msg.rpc_proc;
+ const struct rpc_procinfo *proc = task->tk_msg.rpc_proc;
int status;
dprint_status(task);
@@ -2476,16 +2478,18 @@
goto out_garbage;
}
-static void rpcproc_encode_null(void *rqstp, struct xdr_stream *xdr, void *obj)
+static void rpcproc_encode_null(struct rpc_rqst *rqstp, struct xdr_stream *xdr,
+ const void *obj)
{
}
-static int rpcproc_decode_null(void *rqstp, struct xdr_stream *xdr, void *obj)
+static int rpcproc_decode_null(struct rpc_rqst *rqstp, struct xdr_stream *xdr,
+ void *obj)
{
return 0;
}
-static struct rpc_procinfo rpcproc_null = {
+static const struct rpc_procinfo rpcproc_null = {
.p_encode = rpcproc_encode_null,
.p_decode = rpcproc_decode_null,
};
diff --git a/net/sunrpc/rpcb_clnt.c b/net/sunrpc/rpcb_clnt.c
index 5b30603..ea0676f 100644
--- a/net/sunrpc/rpcb_clnt.c
+++ b/net/sunrpc/rpcb_clnt.c
@@ -128,13 +128,13 @@
int r_status;
};
-static struct rpc_procinfo rpcb_procedures2[];
-static struct rpc_procinfo rpcb_procedures3[];
-static struct rpc_procinfo rpcb_procedures4[];
+static const struct rpc_procinfo rpcb_procedures2[];
+static const struct rpc_procinfo rpcb_procedures3[];
+static const struct rpc_procinfo rpcb_procedures4[];
struct rpcb_info {
u32 rpc_vers;
- struct rpc_procinfo * rpc_proc;
+ const struct rpc_procinfo *rpc_proc;
};
static const struct rpcb_info rpcb_next_version[];
@@ -620,7 +620,8 @@
return -EAFNOSUPPORT;
}
-static struct rpc_task *rpcb_call_async(struct rpc_clnt *rpcb_clnt, struct rpcbind_args *map, struct rpc_procinfo *proc)
+static struct rpc_task *rpcb_call_async(struct rpc_clnt *rpcb_clnt,
+ struct rpcbind_args *map, const struct rpc_procinfo *proc)
{
struct rpc_message msg = {
.rpc_proc = proc,
@@ -671,7 +672,7 @@
void rpcb_getport_async(struct rpc_task *task)
{
struct rpc_clnt *clnt;
- struct rpc_procinfo *proc;
+ const struct rpc_procinfo *proc;
u32 bind_version;
struct rpc_xprt *xprt;
struct rpc_clnt *rpcb_clnt;
@@ -843,8 +844,9 @@
*/
static void rpcb_enc_mapping(struct rpc_rqst *req, struct xdr_stream *xdr,
- const struct rpcbind_args *rpcb)
+ const void *data)
{
+ const struct rpcbind_args *rpcb = data;
__be32 *p;
dprintk("RPC: %5u encoding PMAP_%s call (%u, %u, %d, %u)\n",
@@ -860,8 +862,9 @@
}
static int rpcb_dec_getport(struct rpc_rqst *req, struct xdr_stream *xdr,
- struct rpcbind_args *rpcb)
+ void *data)
{
+ struct rpcbind_args *rpcb = data;
unsigned long port;
__be32 *p;
@@ -882,8 +885,9 @@
}
static int rpcb_dec_set(struct rpc_rqst *req, struct xdr_stream *xdr,
- unsigned int *boolp)
+ void *data)
{
+ unsigned int *boolp = data;
__be32 *p;
p = xdr_inline_decode(xdr, 4);
@@ -917,8 +921,9 @@
}
static void rpcb_enc_getaddr(struct rpc_rqst *req, struct xdr_stream *xdr,
- const struct rpcbind_args *rpcb)
+ const void *data)
{
+ const struct rpcbind_args *rpcb = data;
__be32 *p;
dprintk("RPC: %5u encoding RPCB_%s call (%u, %u, '%s', '%s')\n",
@@ -937,8 +942,9 @@
}
static int rpcb_dec_getaddr(struct rpc_rqst *req, struct xdr_stream *xdr,
- struct rpcbind_args *rpcb)
+ void *data)
{
+ struct rpcbind_args *rpcb = data;
struct sockaddr_storage address;
struct sockaddr *sap = (struct sockaddr *)&address;
__be32 *p;
@@ -989,11 +995,11 @@
* since the Linux kernel RPC code requires only these.
*/
-static struct rpc_procinfo rpcb_procedures2[] = {
+static const struct rpc_procinfo rpcb_procedures2[] = {
[RPCBPROC_SET] = {
.p_proc = RPCBPROC_SET,
- .p_encode = (kxdreproc_t)rpcb_enc_mapping,
- .p_decode = (kxdrdproc_t)rpcb_dec_set,
+ .p_encode = rpcb_enc_mapping,
+ .p_decode = rpcb_dec_set,
.p_arglen = RPCB_mappingargs_sz,
.p_replen = RPCB_setres_sz,
.p_statidx = RPCBPROC_SET,
@@ -1002,8 +1008,8 @@
},
[RPCBPROC_UNSET] = {
.p_proc = RPCBPROC_UNSET,
- .p_encode = (kxdreproc_t)rpcb_enc_mapping,
- .p_decode = (kxdrdproc_t)rpcb_dec_set,
+ .p_encode = rpcb_enc_mapping,
+ .p_decode = rpcb_dec_set,
.p_arglen = RPCB_mappingargs_sz,
.p_replen = RPCB_setres_sz,
.p_statidx = RPCBPROC_UNSET,
@@ -1012,8 +1018,8 @@
},
[RPCBPROC_GETPORT] = {
.p_proc = RPCBPROC_GETPORT,
- .p_encode = (kxdreproc_t)rpcb_enc_mapping,
- .p_decode = (kxdrdproc_t)rpcb_dec_getport,
+ .p_encode = rpcb_enc_mapping,
+ .p_decode = rpcb_dec_getport,
.p_arglen = RPCB_mappingargs_sz,
.p_replen = RPCB_getportres_sz,
.p_statidx = RPCBPROC_GETPORT,
@@ -1022,11 +1028,11 @@
},
};
-static struct rpc_procinfo rpcb_procedures3[] = {
+static const struct rpc_procinfo rpcb_procedures3[] = {
[RPCBPROC_SET] = {
.p_proc = RPCBPROC_SET,
- .p_encode = (kxdreproc_t)rpcb_enc_getaddr,
- .p_decode = (kxdrdproc_t)rpcb_dec_set,
+ .p_encode = rpcb_enc_getaddr,
+ .p_decode = rpcb_dec_set,
.p_arglen = RPCB_getaddrargs_sz,
.p_replen = RPCB_setres_sz,
.p_statidx = RPCBPROC_SET,
@@ -1035,8 +1041,8 @@
},
[RPCBPROC_UNSET] = {
.p_proc = RPCBPROC_UNSET,
- .p_encode = (kxdreproc_t)rpcb_enc_getaddr,
- .p_decode = (kxdrdproc_t)rpcb_dec_set,
+ .p_encode = rpcb_enc_getaddr,
+ .p_decode = rpcb_dec_set,
.p_arglen = RPCB_getaddrargs_sz,
.p_replen = RPCB_setres_sz,
.p_statidx = RPCBPROC_UNSET,
@@ -1045,8 +1051,8 @@
},
[RPCBPROC_GETADDR] = {
.p_proc = RPCBPROC_GETADDR,
- .p_encode = (kxdreproc_t)rpcb_enc_getaddr,
- .p_decode = (kxdrdproc_t)rpcb_dec_getaddr,
+ .p_encode = rpcb_enc_getaddr,
+ .p_decode = rpcb_dec_getaddr,
.p_arglen = RPCB_getaddrargs_sz,
.p_replen = RPCB_getaddrres_sz,
.p_statidx = RPCBPROC_GETADDR,
@@ -1055,11 +1061,11 @@
},
};
-static struct rpc_procinfo rpcb_procedures4[] = {
+static const struct rpc_procinfo rpcb_procedures4[] = {
[RPCBPROC_SET] = {
.p_proc = RPCBPROC_SET,
- .p_encode = (kxdreproc_t)rpcb_enc_getaddr,
- .p_decode = (kxdrdproc_t)rpcb_dec_set,
+ .p_encode = rpcb_enc_getaddr,
+ .p_decode = rpcb_dec_set,
.p_arglen = RPCB_getaddrargs_sz,
.p_replen = RPCB_setres_sz,
.p_statidx = RPCBPROC_SET,
@@ -1068,8 +1074,8 @@
},
[RPCBPROC_UNSET] = {
.p_proc = RPCBPROC_UNSET,
- .p_encode = (kxdreproc_t)rpcb_enc_getaddr,
- .p_decode = (kxdrdproc_t)rpcb_dec_set,
+ .p_encode = rpcb_enc_getaddr,
+ .p_decode = rpcb_dec_set,
.p_arglen = RPCB_getaddrargs_sz,
.p_replen = RPCB_setres_sz,
.p_statidx = RPCBPROC_UNSET,
@@ -1078,8 +1084,8 @@
},
[RPCBPROC_GETADDR] = {
.p_proc = RPCBPROC_GETADDR,
- .p_encode = (kxdreproc_t)rpcb_enc_getaddr,
- .p_decode = (kxdrdproc_t)rpcb_dec_getaddr,
+ .p_encode = rpcb_enc_getaddr,
+ .p_decode = rpcb_dec_getaddr,
.p_arglen = RPCB_getaddrargs_sz,
.p_replen = RPCB_getaddrres_sz,
.p_statidx = RPCBPROC_GETADDR,
@@ -1112,22 +1118,28 @@
},
};
+static unsigned int rpcb_version2_counts[ARRAY_SIZE(rpcb_procedures2)];
static const struct rpc_version rpcb_version2 = {
.number = RPCBVERS_2,
.nrprocs = ARRAY_SIZE(rpcb_procedures2),
- .procs = rpcb_procedures2
+ .procs = rpcb_procedures2,
+ .counts = rpcb_version2_counts,
};
+static unsigned int rpcb_version3_counts[ARRAY_SIZE(rpcb_procedures3)];
static const struct rpc_version rpcb_version3 = {
.number = RPCBVERS_3,
.nrprocs = ARRAY_SIZE(rpcb_procedures3),
- .procs = rpcb_procedures3
+ .procs = rpcb_procedures3,
+ .counts = rpcb_version3_counts,
};
+static unsigned int rpcb_version4_counts[ARRAY_SIZE(rpcb_procedures4)];
static const struct rpc_version rpcb_version4 = {
.number = RPCBVERS_4,
.nrprocs = ARRAY_SIZE(rpcb_procedures4),
- .procs = rpcb_procedures4
+ .procs = rpcb_procedures4,
+ .counts = rpcb_version4_counts,
};
static const struct rpc_version *rpcb_version[] = {
diff --git a/net/sunrpc/stats.c b/net/sunrpc/stats.c
index caeb01a..1e67133 100644
--- a/net/sunrpc/stats.c
+++ b/net/sunrpc/stats.c
@@ -55,8 +55,7 @@
seq_printf(seq, "proc%u %u",
vers->number, vers->nrprocs);
for (j = 0; j < vers->nrprocs; j++)
- seq_printf(seq, " %u",
- vers->procs[j].p_count);
+ seq_printf(seq, " %u", vers->counts[j]);
seq_putc(seq, '\n');
}
return 0;
@@ -78,9 +77,9 @@
/*
* Get RPC server stats
*/
-void svc_seq_show(struct seq_file *seq, const struct svc_stat *statp) {
+void svc_seq_show(struct seq_file *seq, const struct svc_stat *statp)
+{
const struct svc_program *prog = statp->program;
- const struct svc_procedure *proc;
const struct svc_version *vers;
unsigned int i, j;
@@ -99,11 +98,12 @@
statp->rpcbadclnt);
for (i = 0; i < prog->pg_nvers; i++) {
- if (!(vers = prog->pg_vers[i]) || !(proc = vers->vs_proc))
+ vers = prog->pg_vers[i];
+ if (!vers)
continue;
seq_printf(seq, "proc%d %u", i, vers->vs_nproc);
- for (j = 0; j < vers->vs_nproc; j++, proc++)
- seq_printf(seq, " %u", proc->pc_count);
+ for (j = 0; j < vers->vs_nproc; j++)
+ seq_printf(seq, " %u", vers->vs_count[j]);
seq_putc(seq, '\n');
}
}
@@ -192,7 +192,7 @@
EXPORT_SYMBOL_GPL(rpc_count_iostats);
static void _print_name(struct seq_file *seq, unsigned int op,
- struct rpc_procinfo *procs)
+ const struct rpc_procinfo *procs)
{
if (procs[op].p_name)
seq_printf(seq, "\t%12s: ", procs[op].p_name);
diff --git a/net/sunrpc/svc.c b/net/sunrpc/svc.c
index bc0f5a0..85ce0db 100644
--- a/net/sunrpc/svc.c
+++ b/net/sunrpc/svc.c
@@ -1008,7 +1008,7 @@
const unsigned short port)
{
struct svc_program *progp;
- struct svc_version *vers;
+ const struct svc_version *vers;
unsigned int i;
int error = 0;
@@ -1151,10 +1151,9 @@
svc_process_common(struct svc_rqst *rqstp, struct kvec *argv, struct kvec *resv)
{
struct svc_program *progp;
- struct svc_version *versp = NULL; /* compiler food */
- struct svc_procedure *procp = NULL;
+ const struct svc_version *versp = NULL; /* compiler food */
+ const struct svc_procedure *procp = NULL;
struct svc_serv *serv = rqstp->rq_server;
- kxdrproc_t xdr;
__be32 *statp;
u32 prog, vers, proc;
__be32 auth_stat, rpc_stat;
@@ -1166,7 +1165,7 @@
if (argv->iov_len < 6*4)
goto err_short_len;
- /* Will be turned off only in gss privacy case: */
+ /* Will be turned off by GSS integrity and privacy services */
set_bit(RQ_SPLICE_OK, &rqstp->rq_flags);
/* Will be turned off only when NFSv4 Sessions are used */
set_bit(RQ_USEDEFERRAL, &rqstp->rq_flags);
@@ -1262,7 +1261,7 @@
svc_putnl(resv, RPC_SUCCESS);
/* Bump per-procedure stats counter */
- procp->pc_count++;
+ versp->vs_count[proc]++;
/* Initialize storage for argp and resp */
memset(rqstp->rq_argp, 0, procp->pc_argsize);
@@ -1276,28 +1275,30 @@
/* Call the function that processes the request. */
if (!versp->vs_dispatch) {
- /* Decode arguments */
- xdr = procp->pc_decode;
- if (xdr && !xdr(rqstp, argv->iov_base, rqstp->rq_argp))
+ /*
+ * Decode arguments
+ * XXX: why do we ignore the return value?
+ */
+ if (procp->pc_decode &&
+ !procp->pc_decode(rqstp, argv->iov_base))
goto err_garbage;
- *statp = procp->pc_func(rqstp, rqstp->rq_argp, rqstp->rq_resp);
+ *statp = procp->pc_func(rqstp);
/* Encode reply */
if (*statp == rpc_drop_reply ||
test_bit(RQ_DROPME, &rqstp->rq_flags)) {
if (procp->pc_release)
- procp->pc_release(rqstp, NULL, rqstp->rq_resp);
+ procp->pc_release(rqstp);
goto dropit;
}
if (*statp == rpc_autherr_badcred) {
if (procp->pc_release)
- procp->pc_release(rqstp, NULL, rqstp->rq_resp);
+ procp->pc_release(rqstp);
goto err_bad_auth;
}
- if (*statp == rpc_success &&
- (xdr = procp->pc_encode) &&
- !xdr(rqstp, resv->iov_base+resv->iov_len, rqstp->rq_resp)) {
+ if (*statp == rpc_success && procp->pc_encode &&
+ !procp->pc_encode(rqstp, resv->iov_base + resv->iov_len)) {
dprintk("svc: failed to encode reply\n");
/* serv->sv_stats->rpcsystemerr++; */
*statp = rpc_system_err;
@@ -1307,7 +1308,7 @@
if (!versp->vs_dispatch(rqstp, statp)) {
/* Release reply info */
if (procp->pc_release)
- procp->pc_release(rqstp, NULL, rqstp->rq_resp);
+ procp->pc_release(rqstp);
goto dropit;
}
}
@@ -1318,7 +1319,7 @@
/* Release reply info */
if (procp->pc_release)
- procp->pc_release(rqstp, NULL, rqstp->rq_resp);
+ procp->pc_release(rqstp);
if (procp->pc_encode == NULL)
goto dropit;
diff --git a/net/sunrpc/svc_xprt.c b/net/sunrpc/svc_xprt.c
index 7bfe1fb..d16a8b4 100644
--- a/net/sunrpc/svc_xprt.c
+++ b/net/sunrpc/svc_xprt.c
@@ -659,11 +659,13 @@
int i;
/* now allocate needed pages. If we get a failure, sleep briefly */
- pages = (serv->sv_max_mesg + PAGE_SIZE) / PAGE_SIZE;
- WARN_ON_ONCE(pages >= RPCSVC_MAXPAGES);
- if (pages >= RPCSVC_MAXPAGES)
+ pages = (serv->sv_max_mesg + 2 * PAGE_SIZE) >> PAGE_SHIFT;
+ if (pages > RPCSVC_MAXPAGES) {
+ pr_warn_once("svc: warning: pages=%u > RPCSVC_MAXPAGES=%lu\n",
+ pages, RPCSVC_MAXPAGES);
/* use as many pages as possible */
- pages = RPCSVC_MAXPAGES - 1;
+ pages = RPCSVC_MAXPAGES;
+ }
for (i = 0; i < pages ; i++)
while (rqstp->rq_pages[i] == NULL) {
struct page *p = alloc_page(GFP_KERNEL);
diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c
index 3e63c5e..4654a99 100644
--- a/net/sunrpc/xprt.c
+++ b/net/sunrpc/xprt.c
@@ -1047,13 +1047,15 @@
return ret;
}
-static struct rpc_rqst *xprt_dynamic_alloc_slot(struct rpc_xprt *xprt, gfp_t gfp_flags)
+static struct rpc_rqst *xprt_dynamic_alloc_slot(struct rpc_xprt *xprt)
{
struct rpc_rqst *req = ERR_PTR(-EAGAIN);
if (!atomic_add_unless(&xprt->num_reqs, 1, xprt->max_reqs))
goto out;
- req = kzalloc(sizeof(struct rpc_rqst), gfp_flags);
+ spin_unlock(&xprt->reserve_lock);
+ req = kzalloc(sizeof(struct rpc_rqst), GFP_NOFS);
+ spin_lock(&xprt->reserve_lock);
if (req != NULL)
goto out;
atomic_dec(&xprt->num_reqs);
@@ -1081,7 +1083,7 @@
list_del(&req->rq_list);
goto out_init_req;
}
- req = xprt_dynamic_alloc_slot(xprt, GFP_NOWAIT|__GFP_NOWARN);
+ req = xprt_dynamic_alloc_slot(xprt);
if (!IS_ERR(req))
goto out_init_req;
switch (PTR_ERR(req)) {
diff --git a/net/sunrpc/xprtrdma/Makefile b/net/sunrpc/xprtrdma/Makefile
index c1ae814..b8213dd 100644
--- a/net/sunrpc/xprtrdma/Makefile
+++ b/net/sunrpc/xprtrdma/Makefile
@@ -3,6 +3,6 @@
rpcrdma-y := transport.o rpc_rdma.o verbs.o \
fmr_ops.o frwr_ops.o \
svc_rdma.o svc_rdma_backchannel.o svc_rdma_transport.o \
- svc_rdma_marshal.o svc_rdma_sendto.o svc_rdma_recvfrom.o \
- svc_rdma_rw.o module.o
+ svc_rdma_sendto.o svc_rdma_recvfrom.o svc_rdma_rw.o \
+ module.o
rpcrdma-$(CONFIG_SUNRPC_BACKCHANNEL) += backchannel.o
diff --git a/net/sunrpc/xprtrdma/fmr_ops.c b/net/sunrpc/xprtrdma/fmr_ops.c
index 59e6402..d3f84bb 100644
--- a/net/sunrpc/xprtrdma/fmr_ops.c
+++ b/net/sunrpc/xprtrdma/fmr_ops.c
@@ -91,7 +91,7 @@
list_add(&mw->fmr.fm_mr->list, &l);
rc = ib_unmap_fmr(&l);
- list_del_init(&mw->fmr.fm_mr->list);
+ list_del(&mw->fmr.fm_mr->list);
return rc;
}
@@ -213,13 +213,11 @@
offset_in_page((seg-1)->mr_offset + (seg-1)->mr_len))
break;
}
- mw->mw_nents = i;
mw->mw_dir = rpcrdma_data_dir(writing);
- if (i == 0)
- goto out_dmamap_err;
- if (!ib_dma_map_sg(r_xprt->rx_ia.ri_device,
- mw->mw_sg, mw->mw_nents, mw->mw_dir))
+ mw->mw_nents = ib_dma_map_sg(r_xprt->rx_ia.ri_device,
+ mw->mw_sg, i, mw->mw_dir);
+ if (!mw->mw_nents)
goto out_dmamap_err;
for (i = 0, dma_pages = mw->fmr.fm_physaddrs; i < mw->mw_nents; i++)
@@ -237,16 +235,18 @@
return mw->mw_nents;
out_dmamap_err:
- pr_err("rpcrdma: failed to dma map sg %p sg_nents %u\n",
- mw->mw_sg, mw->mw_nents);
- rpcrdma_defer_mr_recovery(mw);
+ pr_err("rpcrdma: failed to DMA map sg %p sg_nents %d\n",
+ mw->mw_sg, i);
+ rpcrdma_put_mw(r_xprt, mw);
return -EIO;
out_maperr:
pr_err("rpcrdma: ib_map_phys_fmr %u@0x%llx+%i (%d) status %i\n",
len, (unsigned long long)dma_pages[0],
pageoff, mw->mw_nents, rc);
- rpcrdma_defer_mr_recovery(mw);
+ ib_dma_unmap_sg(r_xprt->rx_ia.ri_device,
+ mw->mw_sg, mw->mw_nents, mw->mw_dir);
+ rpcrdma_put_mw(r_xprt, mw);
return -EIO;
}
@@ -255,24 +255,26 @@
* Sleeps until it is safe for the host CPU to access the
* previously mapped memory regions.
*
- * Caller ensures that req->rl_registered is not empty.
+ * Caller ensures that @mws is not empty before the call. This
+ * function empties the list.
*/
static void
-fmr_op_unmap_sync(struct rpcrdma_xprt *r_xprt, struct rpcrdma_req *req)
+fmr_op_unmap_sync(struct rpcrdma_xprt *r_xprt, struct list_head *mws)
{
- struct rpcrdma_mw *mw, *tmp;
+ struct rpcrdma_mw *mw;
LIST_HEAD(unmap_list);
int rc;
- dprintk("RPC: %s: req %p\n", __func__, req);
-
/* ORDER: Invalidate all of the req's MRs first
*
* ib_unmap_fmr() is slow, so use a single call instead
* of one call per mapped FMR.
*/
- list_for_each_entry(mw, &req->rl_registered, mw_list)
+ list_for_each_entry(mw, mws, mw_list) {
+ dprintk("RPC: %s: unmapping fmr %p\n",
+ __func__, &mw->fmr);
list_add_tail(&mw->fmr.fm_mr->list, &unmap_list);
+ }
r_xprt->rx_stats.local_inv_needed++;
rc = ib_unmap_fmr(&unmap_list);
if (rc)
@@ -281,9 +283,11 @@
/* ORDER: Now DMA unmap all of the req's MRs, and return
* them to the free MW list.
*/
- list_for_each_entry_safe(mw, tmp, &req->rl_registered, mw_list) {
- list_del_init(&mw->mw_list);
- list_del_init(&mw->fmr.fm_mr->list);
+ while (!list_empty(mws)) {
+ mw = rpcrdma_pop_mw(mws);
+ dprintk("RPC: %s: DMA unmapping fmr %p\n",
+ __func__, &mw->fmr);
+ list_del(&mw->fmr.fm_mr->list);
ib_dma_unmap_sg(r_xprt->rx_ia.ri_device,
mw->mw_sg, mw->mw_nents, mw->mw_dir);
rpcrdma_put_mw(r_xprt, mw);
@@ -294,8 +298,9 @@
out_reset:
pr_err("rpcrdma: ib_unmap_fmr failed (%i)\n", rc);
- list_for_each_entry_safe(mw, tmp, &req->rl_registered, mw_list) {
- list_del_init(&mw->fmr.fm_mr->list);
+ while (!list_empty(mws)) {
+ mw = rpcrdma_pop_mw(mws);
+ list_del(&mw->fmr.fm_mr->list);
fmr_op_recover_mr(mw);
}
}
diff --git a/net/sunrpc/xprtrdma/frwr_ops.c b/net/sunrpc/xprtrdma/frwr_ops.c
index f81dd93..6aea36a 100644
--- a/net/sunrpc/xprtrdma/frwr_ops.c
+++ b/net/sunrpc/xprtrdma/frwr_ops.c
@@ -277,7 +277,7 @@
}
/**
- * frwr_wc_fastreg - Invoked by RDMA provider for each polled FastReg WC
+ * frwr_wc_fastreg - Invoked by RDMA provider for a flushed FastReg WC
* @cq: completion queue (ignored)
* @wc: completed WR
*
@@ -298,7 +298,7 @@
}
/**
- * frwr_wc_localinv - Invoked by RDMA provider for each polled LocalInv WC
+ * frwr_wc_localinv - Invoked by RDMA provider for a flushed LocalInv WC
* @cq: completion queue (ignored)
* @wc: completed WR
*
@@ -319,7 +319,7 @@
}
/**
- * frwr_wc_localinv - Invoked by RDMA provider for each polled LocalInv WC
+ * frwr_wc_localinv_wake - Invoked by RDMA provider for a signaled LocalInv WC
* @cq: completion queue (ignored)
* @wc: completed WR
*
@@ -355,7 +355,7 @@
struct ib_mr *mr;
struct ib_reg_wr *reg_wr;
struct ib_send_wr *bad_wr;
- int rc, i, n, dma_nents;
+ int rc, i, n;
u8 key;
mw = NULL;
@@ -391,14 +391,10 @@
offset_in_page((seg-1)->mr_offset + (seg-1)->mr_len))
break;
}
- mw->mw_nents = i;
mw->mw_dir = rpcrdma_data_dir(writing);
- if (i == 0)
- goto out_dmamap_err;
- dma_nents = ib_dma_map_sg(ia->ri_device,
- mw->mw_sg, mw->mw_nents, mw->mw_dir);
- if (!dma_nents)
+ mw->mw_nents = ib_dma_map_sg(ia->ri_device, mw->mw_sg, i, mw->mw_dir);
+ if (!mw->mw_nents)
goto out_dmamap_err;
n = ib_map_mr_sg(mr, mw->mw_sg, mw->mw_nents, NULL, PAGE_SIZE);
@@ -436,13 +432,14 @@
return mw->mw_nents;
out_dmamap_err:
- pr_err("rpcrdma: failed to dma map sg %p sg_nents %u\n",
- mw->mw_sg, mw->mw_nents);
- rpcrdma_defer_mr_recovery(mw);
+ pr_err("rpcrdma: failed to DMA map sg %p sg_nents %d\n",
+ mw->mw_sg, i);
+ frmr->fr_state = FRMR_IS_INVALID;
+ rpcrdma_put_mw(r_xprt, mw);
return -EIO;
out_mapmr_err:
- pr_err("rpcrdma: failed to map mr %p (%u/%u)\n",
+ pr_err("rpcrdma: failed to map mr %p (%d/%d)\n",
frmr->fr_mr, n, mw->mw_nents);
rpcrdma_defer_mr_recovery(mw);
return -EIO;
@@ -458,21 +455,19 @@
* Sleeps until it is safe for the host CPU to access the
* previously mapped memory regions.
*
- * Caller ensures that req->rl_registered is not empty.
+ * Caller ensures that @mws is not empty before the call. This
+ * function empties the list.
*/
static void
-frwr_op_unmap_sync(struct rpcrdma_xprt *r_xprt, struct rpcrdma_req *req)
+frwr_op_unmap_sync(struct rpcrdma_xprt *r_xprt, struct list_head *mws)
{
struct ib_send_wr *first, **prev, *last, *bad_wr;
- struct rpcrdma_rep *rep = req->rl_reply;
struct rpcrdma_ia *ia = &r_xprt->rx_ia;
struct rpcrdma_frmr *f;
struct rpcrdma_mw *mw;
int count, rc;
- dprintk("RPC: %s: req %p\n", __func__, req);
-
- /* ORDER: Invalidate all of the req's MRs first
+ /* ORDER: Invalidate all of the MRs first
*
* Chain the LOCAL_INV Work Requests and post them with
* a single ib_post_send() call.
@@ -480,11 +475,10 @@
f = NULL;
count = 0;
prev = &first;
- list_for_each_entry(mw, &req->rl_registered, mw_list) {
+ list_for_each_entry(mw, mws, mw_list) {
mw->frmr.fr_state = FRMR_IS_INVALID;
- if ((rep->rr_wc_flags & IB_WC_WITH_INVALIDATE) &&
- (mw->mw_handle == rep->rr_inv_rkey))
+ if (mw->mw_flags & RPCRDMA_MW_F_RI)
continue;
f = &mw->frmr;
@@ -524,18 +518,19 @@
* unless ri_id->qp is a valid pointer.
*/
r_xprt->rx_stats.local_inv_needed++;
+ bad_wr = NULL;
rc = ib_post_send(ia->ri_id->qp, first, &bad_wr);
+ if (bad_wr != first)
+ wait_for_completion(&f->fr_linv_done);
if (rc)
goto reset_mrs;
- wait_for_completion(&f->fr_linv_done);
-
- /* ORDER: Now DMA unmap all of the req's MRs, and return
+ /* ORDER: Now DMA unmap all of the MRs, and return
* them to the free MW list.
*/
unmap:
- while (!list_empty(&req->rl_registered)) {
- mw = rpcrdma_pop_mw(&req->rl_registered);
+ while (!list_empty(mws)) {
+ mw = rpcrdma_pop_mw(mws);
dprintk("RPC: %s: DMA unmapping frmr %p\n",
__func__, &mw->frmr);
ib_dma_unmap_sg(ia->ri_device,
@@ -546,17 +541,19 @@
reset_mrs:
pr_err("rpcrdma: FRMR invalidate ib_post_send returned %i\n", rc);
- rdma_disconnect(ia->ri_id);
/* Find and reset the MRs in the LOCAL_INV WRs that did not
- * get posted. This is synchronous, and slow.
+ * get posted.
*/
- list_for_each_entry(mw, &req->rl_registered, mw_list) {
- f = &mw->frmr;
- if (mw->mw_handle == bad_wr->ex.invalidate_rkey) {
- __frwr_reset_mr(ia, mw);
- bad_wr = bad_wr->next;
- }
+ rpcrdma_init_cqcount(&r_xprt->rx_ep, -count);
+ while (bad_wr) {
+ f = container_of(bad_wr, struct rpcrdma_frmr,
+ fr_invwr);
+ mw = container_of(f, struct rpcrdma_mw, frmr);
+
+ __frwr_reset_mr(ia, mw);
+
+ bad_wr = bad_wr->next;
}
goto unmap;
}
diff --git a/net/sunrpc/xprtrdma/rpc_rdma.c b/net/sunrpc/xprtrdma/rpc_rdma.c
index 694e9b1..ca4d6e4 100644
--- a/net/sunrpc/xprtrdma/rpc_rdma.c
+++ b/net/sunrpc/xprtrdma/rpc_rdma.c
@@ -141,7 +141,7 @@
if (xdr->page_len) {
remaining = xdr->page_len;
- offset = xdr->page_base & ~PAGE_MASK;
+ offset = offset_in_page(xdr->page_base);
count = 0;
while (remaining) {
remaining -= min_t(unsigned int,
@@ -222,7 +222,7 @@
len = xdrbuf->page_len;
ppages = xdrbuf->pages + (xdrbuf->page_base >> PAGE_SHIFT);
- page_base = xdrbuf->page_base & ~PAGE_MASK;
+ page_base = offset_in_page(xdrbuf->page_base);
p = 0;
while (len && n < RPCRDMA_MAX_SEGS) {
if (!ppages[p]) {
@@ -540,7 +540,7 @@
goto out;
page = virt_to_page(xdr->tail[0].iov_base);
- page_base = (unsigned long)xdr->tail[0].iov_base & ~PAGE_MASK;
+ page_base = offset_in_page(xdr->tail[0].iov_base);
/* If the content in the page list is an odd length,
* xdr_write_pages() has added a pad at the beginning
@@ -557,7 +557,7 @@
*/
if (xdr->page_len) {
ppages = xdr->pages + (xdr->page_base >> PAGE_SHIFT);
- page_base = xdr->page_base & ~PAGE_MASK;
+ page_base = offset_in_page(xdr->page_base);
remaining = xdr->page_len;
while (remaining) {
sge_no++;
@@ -587,7 +587,7 @@
*/
if (xdr->tail[0].iov_len) {
page = virt_to_page(xdr->tail[0].iov_base);
- page_base = (unsigned long)xdr->tail[0].iov_base & ~PAGE_MASK;
+ page_base = offset_in_page(xdr->tail[0].iov_base);
len = xdr->tail[0].iov_len;
map_tail:
@@ -734,6 +734,9 @@
rpclen = 0;
}
+ req->rl_xid = rqst->rq_xid;
+ rpcrdma_insert_req(&r_xprt->rx_buf, req);
+
/* This implementation supports the following combinations
* of chunk lists in one RPC-over-RDMA Call message:
*
@@ -875,9 +878,9 @@
srcp += curlen;
copy_len -= curlen;
- page_base = rqst->rq_rcv_buf.page_base;
- ppages = rqst->rq_rcv_buf.pages + (page_base >> PAGE_SHIFT);
- page_base &= ~PAGE_MASK;
+ ppages = rqst->rq_rcv_buf.pages +
+ (rqst->rq_rcv_buf.page_base >> PAGE_SHIFT);
+ page_base = offset_in_page(rqst->rq_rcv_buf.page_base);
fixup_copy_count = 0;
if (copy_len && rqst->rq_rcv_buf.page_len) {
int pagelist_len;
@@ -928,6 +931,24 @@
return fixup_copy_count;
}
+/* Caller must guarantee @rep remains stable during this call.
+ */
+static void
+rpcrdma_mark_remote_invalidation(struct list_head *mws,
+ struct rpcrdma_rep *rep)
+{
+ struct rpcrdma_mw *mw;
+
+ if (!(rep->rr_wc_flags & IB_WC_WITH_INVALIDATE))
+ return;
+
+ list_for_each_entry(mw, mws, mw_list)
+ if (mw->mw_handle == rep->rr_inv_rkey) {
+ mw->mw_flags = RPCRDMA_MW_F_RI;
+ break; /* only one invalidated MR per RPC */
+ }
+}
+
#if defined(CONFIG_SUNRPC_BACKCHANNEL)
/* By convention, backchannel calls arrive via rdma_msg type
* messages, and never populate the chunk lists. This makes
@@ -969,14 +990,16 @@
{
struct rpcrdma_rep *rep =
container_of(work, struct rpcrdma_rep, rr_work);
+ struct rpcrdma_xprt *r_xprt = rep->rr_rxprt;
+ struct rpcrdma_buffer *buf = &r_xprt->rx_buf;
+ struct rpc_xprt *xprt = &r_xprt->rx_xprt;
struct rpcrdma_msg *headerp;
struct rpcrdma_req *req;
struct rpc_rqst *rqst;
- struct rpcrdma_xprt *r_xprt = rep->rr_rxprt;
- struct rpc_xprt *xprt = &r_xprt->rx_xprt;
__be32 *iptr;
int rdmalen, status, rmerr;
unsigned long cwnd;
+ struct list_head mws;
dprintk("RPC: %s: incoming rep %p\n", __func__, rep);
@@ -994,27 +1017,45 @@
/* Match incoming rpcrdma_rep to an rpcrdma_req to
* get context for handling any incoming chunks.
*/
- spin_lock_bh(&xprt->transport_lock);
- rqst = xprt_lookup_rqst(xprt, headerp->rm_xid);
- if (!rqst)
+ spin_lock(&buf->rb_lock);
+ req = rpcrdma_lookup_req_locked(&r_xprt->rx_buf,
+ headerp->rm_xid);
+ if (!req)
goto out_nomatch;
-
- req = rpcr_to_rdmar(rqst);
if (req->rl_reply)
goto out_duplicate;
- /* Sanity checking has passed. We are now committed
- * to complete this transaction.
+ list_replace_init(&req->rl_registered, &mws);
+ rpcrdma_mark_remote_invalidation(&mws, rep);
+
+ /* Avoid races with signals and duplicate replies
+ * by marking this req as matched.
*/
- list_del_init(&rqst->rq_list);
- spin_unlock_bh(&xprt->transport_lock);
+ req->rl_reply = rep;
+ spin_unlock(&buf->rb_lock);
+
dprintk("RPC: %s: reply %p completes request %p (xid 0x%08x)\n",
__func__, rep, req, be32_to_cpu(headerp->rm_xid));
- /* from here on, the reply is no longer an orphan */
- req->rl_reply = rep;
- xprt->reestablish_timeout = 0;
+ /* Invalidate and unmap the data payloads before waking the
+ * waiting application. This guarantees the memory regions
+ * are properly fenced from the server before the application
+ * accesses the data. It also ensures proper send flow control:
+ * waking the next RPC waits until this RPC has relinquished
+ * all its Send Queue entries.
+ */
+ if (!list_empty(&mws))
+ r_xprt->rx_ia.ri_ops->ro_unmap_sync(r_xprt, &mws);
+ /* Perform XID lookup, reconstruction of the RPC reply, and
+ * RPC completion while holding the transport lock to ensure
+ * the rep, rqst, and rq_task pointers remain stable.
+ */
+ spin_lock_bh(&xprt->transport_lock);
+ rqst = xprt_lookup_rqst(xprt, headerp->rm_xid);
+ if (!rqst)
+ goto out_norqst;
+ xprt->reestablish_timeout = 0;
if (headerp->rm_vers != rpcrdma_version)
goto out_badversion;
@@ -1024,12 +1065,9 @@
case rdma_msg:
/* never expect read chunks */
/* never expect reply chunks (two ways to check) */
- /* never expect write chunks without having offered RDMA */
if (headerp->rm_body.rm_chunks[0] != xdr_zero ||
(headerp->rm_body.rm_chunks[1] == xdr_zero &&
- headerp->rm_body.rm_chunks[2] != xdr_zero) ||
- (headerp->rm_body.rm_chunks[1] != xdr_zero &&
- list_empty(&req->rl_registered)))
+ headerp->rm_body.rm_chunks[2] != xdr_zero))
goto badheader;
if (headerp->rm_body.rm_chunks[1] != xdr_zero) {
/* count any expected write chunks in read reply */
@@ -1066,8 +1104,7 @@
/* never expect read or write chunks, always reply chunks */
if (headerp->rm_body.rm_chunks[0] != xdr_zero ||
headerp->rm_body.rm_chunks[1] != xdr_zero ||
- headerp->rm_body.rm_chunks[2] != xdr_one ||
- list_empty(&req->rl_registered))
+ headerp->rm_body.rm_chunks[2] != xdr_one)
goto badheader;
iptr = (__be32 *)((unsigned char *)headerp +
RPCRDMA_HDRLEN_MIN);
@@ -1093,17 +1130,6 @@
}
out:
- /* Invalidate and flush the data payloads before waking the
- * waiting application. This guarantees the memory region is
- * properly fenced from the server before the application
- * accesses the data. It also ensures proper send flow
- * control: waking the next RPC waits until this RPC has
- * relinquished all its Send Queue entries.
- */
- if (!list_empty(&req->rl_registered))
- r_xprt->rx_ia.ri_ops->ro_unmap_sync(r_xprt, req);
-
- spin_lock_bh(&xprt->transport_lock);
cwnd = xprt->cwnd;
xprt->cwnd = atomic_read(&r_xprt->rx_buf.rb_credits) << RPC_CWNDSHIFT;
if (xprt->cwnd > cwnd)
@@ -1112,7 +1138,7 @@
xprt_complete_rqst(rqst->rq_task, status);
spin_unlock_bh(&xprt->transport_lock);
dprintk("RPC: %s: xprt_complete_rqst(0x%p, 0x%p, %d)\n",
- __func__, xprt, rqst, status);
+ __func__, xprt, rqst, status);
return;
out_badstatus:
@@ -1161,26 +1187,37 @@
r_xprt->rx_stats.bad_reply_count++;
goto out;
-/* If no pending RPC transaction was matched, post a replacement
- * receive buffer before returning.
+/* The req was still available, but by the time the transport_lock
+ * was acquired, the rqst and task had been released. Thus the RPC
+ * has already been terminated.
*/
+out_norqst:
+ spin_unlock_bh(&xprt->transport_lock);
+ rpcrdma_buffer_put(req);
+ dprintk("RPC: %s: race, no rqst left for req %p\n",
+ __func__, req);
+ return;
+
out_shortreply:
dprintk("RPC: %s: short/invalid reply\n", __func__);
goto repost;
out_nomatch:
- spin_unlock_bh(&xprt->transport_lock);
+ spin_unlock(&buf->rb_lock);
dprintk("RPC: %s: no match for incoming xid 0x%08x len %d\n",
__func__, be32_to_cpu(headerp->rm_xid),
rep->rr_len);
goto repost;
out_duplicate:
- spin_unlock_bh(&xprt->transport_lock);
+ spin_unlock(&buf->rb_lock);
dprintk("RPC: %s: "
"duplicate reply %p to RPC request %p: xid 0x%08x\n",
__func__, rep, req, be32_to_cpu(headerp->rm_xid));
+/* If no pending RPC transaction was matched, post a replacement
+ * receive buffer before returning.
+ */
repost:
r_xprt->rx_stats.bad_reply_count++;
if (rpcrdma_ep_post_recv(&r_xprt->rx_ia, rep))
diff --git a/net/sunrpc/xprtrdma/svc_rdma_marshal.c b/net/sunrpc/xprtrdma/svc_rdma_marshal.c
deleted file mode 100644
index bdcf7d8..0000000
--- a/net/sunrpc/xprtrdma/svc_rdma_marshal.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * Copyright (c) 2016 Oracle. All rights reserved.
- * Copyright (c) 2005-2006 Network Appliance, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the BSD-type
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- *
- * Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials provided
- * with the distribution.
- *
- * Neither the name of the Network Appliance, Inc. nor the names of
- * its contributors may be used to endorse or promote products
- * derived from this software without specific prior written
- * permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * Author: Tom Tucker <tom@opengridcomputing.com>
- */
-
-#include <linux/sunrpc/xdr.h>
-#include <linux/sunrpc/debug.h>
-#include <asm/unaligned.h>
-#include <linux/sunrpc/rpc_rdma.h>
-#include <linux/sunrpc/svc_rdma.h>
-
-#define RPCDBG_FACILITY RPCDBG_SVCXPRT
-
-static __be32 *xdr_check_read_list(__be32 *p, __be32 *end)
-{
- __be32 *next;
-
- while (*p++ != xdr_zero) {
- next = p + rpcrdma_readchunk_maxsz - 1;
- if (next > end)
- return NULL;
- p = next;
- }
- return p;
-}
-
-static __be32 *xdr_check_write_list(__be32 *p, __be32 *end)
-{
- __be32 *next;
-
- while (*p++ != xdr_zero) {
- next = p + 1 + be32_to_cpup(p) * rpcrdma_segment_maxsz;
- if (next > end)
- return NULL;
- p = next;
- }
- return p;
-}
-
-static __be32 *xdr_check_reply_chunk(__be32 *p, __be32 *end)
-{
- __be32 *next;
-
- if (*p++ != xdr_zero) {
- next = p + 1 + be32_to_cpup(p) * rpcrdma_segment_maxsz;
- if (next > end)
- return NULL;
- p = next;
- }
- return p;
-}
-
-/**
- * svc_rdma_xdr_decode_req - Parse incoming RPC-over-RDMA header
- * @rq_arg: Receive buffer
- *
- * On entry, xdr->head[0].iov_base points to first byte in the
- * RPC-over-RDMA header.
- *
- * On successful exit, head[0] points to first byte past the
- * RPC-over-RDMA header. For RDMA_MSG, this is the RPC message.
- * The length of the RPC-over-RDMA header is returned.
- */
-int svc_rdma_xdr_decode_req(struct xdr_buf *rq_arg)
-{
- __be32 *p, *end, *rdma_argp;
- unsigned int hdr_len;
-
- /* Verify that there's enough bytes for header + something */
- if (rq_arg->len <= RPCRDMA_HDRLEN_ERR)
- goto out_short;
-
- rdma_argp = rq_arg->head[0].iov_base;
- if (*(rdma_argp + 1) != rpcrdma_version)
- goto out_version;
-
- switch (*(rdma_argp + 3)) {
- case rdma_msg:
- case rdma_nomsg:
- break;
-
- case rdma_done:
- goto out_drop;
-
- case rdma_error:
- goto out_drop;
-
- default:
- goto out_proc;
- }
-
- end = (__be32 *)((unsigned long)rdma_argp + rq_arg->len);
- p = xdr_check_read_list(rdma_argp + 4, end);
- if (!p)
- goto out_inval;
- p = xdr_check_write_list(p, end);
- if (!p)
- goto out_inval;
- p = xdr_check_reply_chunk(p, end);
- if (!p)
- goto out_inval;
- if (p > end)
- goto out_inval;
-
- rq_arg->head[0].iov_base = p;
- hdr_len = (unsigned long)p - (unsigned long)rdma_argp;
- rq_arg->head[0].iov_len -= hdr_len;
- return hdr_len;
-
-out_short:
- dprintk("svcrdma: header too short = %d\n", rq_arg->len);
- return -EINVAL;
-
-out_version:
- dprintk("svcrdma: bad xprt version: %u\n",
- be32_to_cpup(rdma_argp + 1));
- return -EPROTONOSUPPORT;
-
-out_drop:
- dprintk("svcrdma: dropping RDMA_DONE/ERROR message\n");
- return 0;
-
-out_proc:
- dprintk("svcrdma: bad rdma procedure (%u)\n",
- be32_to_cpup(rdma_argp + 3));
- return -EINVAL;
-
-out_inval:
- dprintk("svcrdma: failed to parse transport header\n");
- return -EINVAL;
-}
diff --git a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
index 27a99bf..ad4bd62 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
@@ -1,4 +1,5 @@
/*
+ * Copyright (c) 2016, 2017 Oracle. All rights reserved.
* Copyright (c) 2014 Open Grid Computing, Inc. All rights reserved.
* Copyright (c) 2005-2006 Network Appliance, Inc. All rights reserved.
*
@@ -40,12 +41,66 @@
* Author: Tom Tucker <tom@opengridcomputing.com>
*/
-#include <linux/sunrpc/debug.h>
-#include <linux/sunrpc/rpc_rdma.h>
-#include <linux/spinlock.h>
+/* Operation
+ *
+ * The main entry point is svc_rdma_recvfrom. This is called from
+ * svc_recv when the transport indicates there is incoming data to
+ * be read. "Data Ready" is signaled when an RDMA Receive completes,
+ * or when a set of RDMA Reads complete.
+ *
+ * An svc_rqst is passed in. This structure contains an array of
+ * free pages (rq_pages) that will contain the incoming RPC message.
+ *
+ * Short messages are moved directly into svc_rqst::rq_arg, and
+ * the RPC Call is ready to be processed by the Upper Layer.
+ * svc_rdma_recvfrom returns the length of the RPC Call message,
+ * completing the reception of the RPC Call.
+ *
+ * However, when an incoming message has Read chunks,
+ * svc_rdma_recvfrom must post RDMA Reads to pull the RPC Call's
+ * data payload from the client. svc_rdma_recvfrom sets up the
+ * RDMA Reads using pages in svc_rqst::rq_pages, which are
+ * transferred to an svc_rdma_op_ctxt for the duration of the
+ * I/O. svc_rdma_recvfrom then returns zero, since the RPC message
+ * is still not yet ready.
+ *
+ * When the Read chunk payloads have become available on the
+ * server, "Data Ready" is raised again, and svc_recv calls
+ * svc_rdma_recvfrom again. This second call may use a different
+ * svc_rqst than the first one, thus any information that needs
+ * to be preserved across these two calls is kept in an
+ * svc_rdma_op_ctxt.
+ *
+ * The second call to svc_rdma_recvfrom performs final assembly
+ * of the RPC Call message, using the RDMA Read sink pages kept in
+ * the svc_rdma_op_ctxt. The xdr_buf is copied from the
+ * svc_rdma_op_ctxt to the second svc_rqst. The second call returns
+ * the length of the completed RPC Call message.
+ *
+ * Page Management
+ *
+ * Pages under I/O must be transferred from the first svc_rqst to an
+ * svc_rdma_op_ctxt before the first svc_rdma_recvfrom call returns.
+ *
+ * The first svc_rqst supplies pages for RDMA Reads. These are moved
+ * from rqstp::rq_pages into ctxt::pages. The consumed elements of
+ * the rq_pages array are set to NULL and refilled with the first
+ * svc_rdma_recvfrom call returns.
+ *
+ * During the second svc_rdma_recvfrom call, RDMA Read sink pages
+ * are transferred from the svc_rdma_op_ctxt to the second svc_rqst
+ * (see rdma_read_complete() below).
+ */
+
#include <asm/unaligned.h>
#include <rdma/ib_verbs.h>
#include <rdma/rdma_cm.h>
+
+#include <linux/spinlock.h>
+
+#include <linux/sunrpc/xdr.h>
+#include <linux/sunrpc/debug.h>
+#include <linux/sunrpc/rpc_rdma.h>
#include <linux/sunrpc/svc_rdma.h>
#define RPCDBG_FACILITY RPCDBG_SVCXPRT
@@ -59,7 +114,6 @@
struct svc_rdma_op_ctxt *ctxt,
u32 byte_count)
{
- struct rpcrdma_msg *rmsgp;
struct page *page;
u32 bc;
int sge_no;
@@ -83,20 +137,12 @@
rqstp->rq_arg.page_len = bc;
rqstp->rq_arg.page_base = 0;
- /* RDMA_NOMSG: RDMA READ data should land just after RDMA RECV data */
- rmsgp = (struct rpcrdma_msg *)rqstp->rq_arg.head[0].iov_base;
- if (rmsgp->rm_type == rdma_nomsg)
- rqstp->rq_arg.pages = &rqstp->rq_pages[0];
- else
- rqstp->rq_arg.pages = &rqstp->rq_pages[1];
-
sge_no = 1;
while (bc && sge_no < ctxt->count) {
page = ctxt->pages[sge_no];
put_page(rqstp->rq_pages[sge_no]);
rqstp->rq_pages[sge_no] = page;
bc -= min_t(u32, bc, ctxt->sge[sge_no].length);
- rqstp->rq_arg.buflen += ctxt->sge[sge_no].length;
sge_no++;
}
rqstp->rq_respages = &rqstp->rq_pages[sge_no];
@@ -115,406 +161,208 @@
rqstp->rq_arg.tail[0].iov_len = 0;
}
-/* Issue an RDMA_READ using the local lkey to map the data sink */
-int rdma_read_chunk_lcl(struct svcxprt_rdma *xprt,
- struct svc_rqst *rqstp,
- struct svc_rdma_op_ctxt *head,
- int *page_no,
- u32 *page_offset,
- u32 rs_handle,
- u32 rs_length,
- u64 rs_offset,
- bool last)
-{
- struct ib_rdma_wr read_wr;
- int pages_needed = PAGE_ALIGN(*page_offset + rs_length) >> PAGE_SHIFT;
- struct svc_rdma_op_ctxt *ctxt = svc_rdma_get_context(xprt);
- int ret, read, pno;
- u32 pg_off = *page_offset;
- u32 pg_no = *page_no;
-
- ctxt->direction = DMA_FROM_DEVICE;
- ctxt->read_hdr = head;
- pages_needed = min_t(int, pages_needed, xprt->sc_max_sge_rd);
- read = min_t(int, (pages_needed << PAGE_SHIFT) - *page_offset,
- rs_length);
-
- for (pno = 0; pno < pages_needed; pno++) {
- int len = min_t(int, rs_length, PAGE_SIZE - pg_off);
-
- head->arg.pages[pg_no] = rqstp->rq_arg.pages[pg_no];
- head->arg.page_len += len;
-
- head->arg.len += len;
- if (!pg_off)
- head->count++;
- rqstp->rq_respages = &rqstp->rq_arg.pages[pg_no+1];
- rqstp->rq_next_page = rqstp->rq_respages + 1;
- ctxt->sge[pno].addr =
- ib_dma_map_page(xprt->sc_cm_id->device,
- head->arg.pages[pg_no], pg_off,
- PAGE_SIZE - pg_off,
- DMA_FROM_DEVICE);
- ret = ib_dma_mapping_error(xprt->sc_cm_id->device,
- ctxt->sge[pno].addr);
- if (ret)
- goto err;
- svc_rdma_count_mappings(xprt, ctxt);
-
- ctxt->sge[pno].lkey = xprt->sc_pd->local_dma_lkey;
- ctxt->sge[pno].length = len;
- ctxt->count++;
-
- /* adjust offset and wrap to next page if needed */
- pg_off += len;
- if (pg_off == PAGE_SIZE) {
- pg_off = 0;
- pg_no++;
- }
- rs_length -= len;
- }
-
- if (last && rs_length == 0)
- set_bit(RDMACTXT_F_LAST_CTXT, &ctxt->flags);
- else
- clear_bit(RDMACTXT_F_LAST_CTXT, &ctxt->flags);
-
- memset(&read_wr, 0, sizeof(read_wr));
- ctxt->cqe.done = svc_rdma_wc_read;
- read_wr.wr.wr_cqe = &ctxt->cqe;
- read_wr.wr.opcode = IB_WR_RDMA_READ;
- read_wr.wr.send_flags = IB_SEND_SIGNALED;
- read_wr.rkey = rs_handle;
- read_wr.remote_addr = rs_offset;
- read_wr.wr.sg_list = ctxt->sge;
- read_wr.wr.num_sge = pages_needed;
-
- ret = svc_rdma_send(xprt, &read_wr.wr);
- if (ret) {
- pr_err("svcrdma: Error %d posting RDMA_READ\n", ret);
- set_bit(XPT_CLOSE, &xprt->sc_xprt.xpt_flags);
- goto err;
- }
-
- /* return current location in page array */
- *page_no = pg_no;
- *page_offset = pg_off;
- ret = read;
- atomic_inc(&rdma_stat_read);
- return ret;
- err:
- svc_rdma_unmap_dma(ctxt);
- svc_rdma_put_context(ctxt, 0);
- return ret;
-}
-
-/* Issue an RDMA_READ using an FRMR to map the data sink */
-int rdma_read_chunk_frmr(struct svcxprt_rdma *xprt,
- struct svc_rqst *rqstp,
- struct svc_rdma_op_ctxt *head,
- int *page_no,
- u32 *page_offset,
- u32 rs_handle,
- u32 rs_length,
- u64 rs_offset,
- bool last)
-{
- struct ib_rdma_wr read_wr;
- struct ib_send_wr inv_wr;
- struct ib_reg_wr reg_wr;
- u8 key;
- int nents = PAGE_ALIGN(*page_offset + rs_length) >> PAGE_SHIFT;
- struct svc_rdma_op_ctxt *ctxt = svc_rdma_get_context(xprt);
- struct svc_rdma_fastreg_mr *frmr = svc_rdma_get_frmr(xprt);
- int ret, read, pno, dma_nents, n;
- u32 pg_off = *page_offset;
- u32 pg_no = *page_no;
-
- if (IS_ERR(frmr))
- return -ENOMEM;
-
- ctxt->direction = DMA_FROM_DEVICE;
- ctxt->frmr = frmr;
- nents = min_t(unsigned int, nents, xprt->sc_frmr_pg_list_len);
- read = min_t(int, (nents << PAGE_SHIFT) - *page_offset, rs_length);
-
- frmr->direction = DMA_FROM_DEVICE;
- frmr->access_flags = (IB_ACCESS_LOCAL_WRITE|IB_ACCESS_REMOTE_WRITE);
- frmr->sg_nents = nents;
-
- for (pno = 0; pno < nents; pno++) {
- int len = min_t(int, rs_length, PAGE_SIZE - pg_off);
-
- head->arg.pages[pg_no] = rqstp->rq_arg.pages[pg_no];
- head->arg.page_len += len;
- head->arg.len += len;
- if (!pg_off)
- head->count++;
-
- sg_set_page(&frmr->sg[pno], rqstp->rq_arg.pages[pg_no],
- len, pg_off);
-
- rqstp->rq_respages = &rqstp->rq_arg.pages[pg_no+1];
- rqstp->rq_next_page = rqstp->rq_respages + 1;
-
- /* adjust offset and wrap to next page if needed */
- pg_off += len;
- if (pg_off == PAGE_SIZE) {
- pg_off = 0;
- pg_no++;
- }
- rs_length -= len;
- }
-
- if (last && rs_length == 0)
- set_bit(RDMACTXT_F_LAST_CTXT, &ctxt->flags);
- else
- clear_bit(RDMACTXT_F_LAST_CTXT, &ctxt->flags);
-
- dma_nents = ib_dma_map_sg(xprt->sc_cm_id->device,
- frmr->sg, frmr->sg_nents,
- frmr->direction);
- if (!dma_nents) {
- pr_err("svcrdma: failed to dma map sg %p\n",
- frmr->sg);
- return -ENOMEM;
- }
-
- n = ib_map_mr_sg(frmr->mr, frmr->sg, frmr->sg_nents, NULL, PAGE_SIZE);
- if (unlikely(n != frmr->sg_nents)) {
- pr_err("svcrdma: failed to map mr %p (%d/%d elements)\n",
- frmr->mr, n, frmr->sg_nents);
- return n < 0 ? n : -EINVAL;
- }
-
- /* Bump the key */
- key = (u8)(frmr->mr->lkey & 0x000000FF);
- ib_update_fast_reg_key(frmr->mr, ++key);
-
- ctxt->sge[0].addr = frmr->mr->iova;
- ctxt->sge[0].lkey = frmr->mr->lkey;
- ctxt->sge[0].length = frmr->mr->length;
- ctxt->count = 1;
- ctxt->read_hdr = head;
-
- /* Prepare REG WR */
- ctxt->reg_cqe.done = svc_rdma_wc_reg;
- reg_wr.wr.wr_cqe = &ctxt->reg_cqe;
- reg_wr.wr.opcode = IB_WR_REG_MR;
- reg_wr.wr.send_flags = IB_SEND_SIGNALED;
- reg_wr.wr.num_sge = 0;
- reg_wr.mr = frmr->mr;
- reg_wr.key = frmr->mr->lkey;
- reg_wr.access = frmr->access_flags;
- reg_wr.wr.next = &read_wr.wr;
-
- /* Prepare RDMA_READ */
- memset(&read_wr, 0, sizeof(read_wr));
- ctxt->cqe.done = svc_rdma_wc_read;
- read_wr.wr.wr_cqe = &ctxt->cqe;
- read_wr.wr.send_flags = IB_SEND_SIGNALED;
- read_wr.rkey = rs_handle;
- read_wr.remote_addr = rs_offset;
- read_wr.wr.sg_list = ctxt->sge;
- read_wr.wr.num_sge = 1;
- if (xprt->sc_dev_caps & SVCRDMA_DEVCAP_READ_W_INV) {
- read_wr.wr.opcode = IB_WR_RDMA_READ_WITH_INV;
- read_wr.wr.ex.invalidate_rkey = ctxt->frmr->mr->lkey;
- } else {
- read_wr.wr.opcode = IB_WR_RDMA_READ;
- read_wr.wr.next = &inv_wr;
- /* Prepare invalidate */
- memset(&inv_wr, 0, sizeof(inv_wr));
- ctxt->inv_cqe.done = svc_rdma_wc_inv;
- inv_wr.wr_cqe = &ctxt->inv_cqe;
- inv_wr.opcode = IB_WR_LOCAL_INV;
- inv_wr.send_flags = IB_SEND_SIGNALED | IB_SEND_FENCE;
- inv_wr.ex.invalidate_rkey = frmr->mr->lkey;
- }
-
- /* Post the chain */
- ret = svc_rdma_send(xprt, ®_wr.wr);
- if (ret) {
- pr_err("svcrdma: Error %d posting RDMA_READ\n", ret);
- set_bit(XPT_CLOSE, &xprt->sc_xprt.xpt_flags);
- goto err;
- }
-
- /* return current location in page array */
- *page_no = pg_no;
- *page_offset = pg_off;
- ret = read;
- atomic_inc(&rdma_stat_read);
- return ret;
- err:
- svc_rdma_put_context(ctxt, 0);
- svc_rdma_put_frmr(xprt, frmr);
- return ret;
-}
-
-static unsigned int
-rdma_rcl_chunk_count(struct rpcrdma_read_chunk *ch)
-{
- unsigned int count;
-
- for (count = 0; ch->rc_discrim != xdr_zero; ch++)
- count++;
- return count;
-}
-
-/* If there was additional inline content, append it to the end of arg.pages.
- * Tail copy has to be done after the reader function has determined how many
- * pages are needed for RDMA READ.
+/* This accommodates the largest possible Write chunk,
+ * in one segment.
*/
-static int
-rdma_copy_tail(struct svc_rqst *rqstp, struct svc_rdma_op_ctxt *head,
- u32 position, u32 byte_count, u32 page_offset, int page_no)
-{
- char *srcp, *destp;
+#define MAX_BYTES_WRITE_SEG ((u32)(RPCSVC_MAXPAGES << PAGE_SHIFT))
- srcp = head->arg.head[0].iov_base + position;
- byte_count = head->arg.head[0].iov_len - position;
- if (byte_count > PAGE_SIZE) {
- dprintk("svcrdma: large tail unsupported\n");
- return 0;
- }
-
- /* Fit as much of the tail on the current page as possible */
- if (page_offset != PAGE_SIZE) {
- destp = page_address(rqstp->rq_arg.pages[page_no]);
- destp += page_offset;
- while (byte_count--) {
- *destp++ = *srcp++;
- page_offset++;
- if (page_offset == PAGE_SIZE && byte_count)
- goto more;
- }
- goto done;
- }
-
-more:
- /* Fit the rest on the next page */
- page_no++;
- destp = page_address(rqstp->rq_arg.pages[page_no]);
- while (byte_count--)
- *destp++ = *srcp++;
-
- rqstp->rq_respages = &rqstp->rq_arg.pages[page_no+1];
- rqstp->rq_next_page = rqstp->rq_respages + 1;
-
-done:
- byte_count = head->arg.head[0].iov_len - position;
- head->arg.page_len += byte_count;
- head->arg.len += byte_count;
- head->arg.buflen += byte_count;
- return 1;
-}
-
-/* Returns the address of the first read chunk or <nul> if no read chunk
- * is present
+/* This accommodates the largest possible Position-Zero
+ * Read chunk or Reply chunk, in one segment.
*/
-static struct rpcrdma_read_chunk *
-svc_rdma_get_read_chunk(struct rpcrdma_msg *rmsgp)
-{
- struct rpcrdma_read_chunk *ch =
- (struct rpcrdma_read_chunk *)&rmsgp->rm_body.rm_chunks[0];
+#define MAX_BYTES_SPECIAL_SEG ((u32)((RPCSVC_MAXPAGES + 2) << PAGE_SHIFT))
- if (ch->rc_discrim == xdr_zero)
- return NULL;
- return ch;
-}
-
-static int rdma_read_chunks(struct svcxprt_rdma *xprt,
- struct rpcrdma_msg *rmsgp,
- struct svc_rqst *rqstp,
- struct svc_rdma_op_ctxt *head)
+/* Sanity check the Read list.
+ *
+ * Implementation limits:
+ * - This implementation supports only one Read chunk.
+ *
+ * Sanity checks:
+ * - Read list does not overflow buffer.
+ * - Segment size limited by largest NFS data payload.
+ *
+ * The segment count is limited to how many segments can
+ * fit in the transport header without overflowing the
+ * buffer. That's about 40 Read segments for a 1KB inline
+ * threshold.
+ *
+ * Returns pointer to the following Write list.
+ */
+static __be32 *xdr_check_read_list(__be32 *p, const __be32 *end)
{
- int page_no, ret;
- struct rpcrdma_read_chunk *ch;
- u32 handle, page_offset, byte_count;
u32 position;
- u64 rs_offset;
- bool last;
+ bool first;
- /* If no read list is present, return 0 */
- ch = svc_rdma_get_read_chunk(rmsgp);
- if (!ch)
- return 0;
-
- if (rdma_rcl_chunk_count(ch) > RPCSVC_MAXPAGES)
- return -EINVAL;
-
- /* The request is completed when the RDMA_READs complete. The
- * head context keeps all the pages that comprise the
- * request.
- */
- head->arg.head[0] = rqstp->rq_arg.head[0];
- head->arg.tail[0] = rqstp->rq_arg.tail[0];
- head->hdr_count = head->count;
- head->arg.page_base = 0;
- head->arg.page_len = 0;
- head->arg.len = rqstp->rq_arg.len;
- head->arg.buflen = rqstp->rq_arg.buflen;
-
- /* RDMA_NOMSG: RDMA READ data should land just after RDMA RECV data */
- position = be32_to_cpu(ch->rc_position);
- if (position == 0) {
- head->arg.pages = &head->pages[0];
- page_offset = head->byte_len;
- } else {
- head->arg.pages = &head->pages[head->count];
- page_offset = 0;
- }
-
- ret = 0;
- page_no = 0;
- for (; ch->rc_discrim != xdr_zero; ch++) {
- if (be32_to_cpu(ch->rc_position) != position)
- goto err;
-
- handle = be32_to_cpu(ch->rc_target.rs_handle),
- byte_count = be32_to_cpu(ch->rc_target.rs_length);
- xdr_decode_hyper((__be32 *)&ch->rc_target.rs_offset,
- &rs_offset);
-
- while (byte_count > 0) {
- last = (ch + 1)->rc_discrim == xdr_zero;
- ret = xprt->sc_reader(xprt, rqstp, head,
- &page_no, &page_offset,
- handle, byte_count,
- rs_offset, last);
- if (ret < 0)
- goto err;
- byte_count -= ret;
- rs_offset += ret;
- head->arg.buflen += ret;
+ first = true;
+ while (*p++ != xdr_zero) {
+ if (first) {
+ position = be32_to_cpup(p++);
+ first = false;
+ } else if (be32_to_cpup(p++) != position) {
+ return NULL;
}
+ p++; /* handle */
+ if (be32_to_cpup(p++) > MAX_BYTES_SPECIAL_SEG)
+ return NULL;
+ p += 2; /* offset */
+
+ if (p > end)
+ return NULL;
+ }
+ return p;
+}
+
+/* The segment count is limited to how many segments can
+ * fit in the transport header without overflowing the
+ * buffer. That's about 60 Write segments for a 1KB inline
+ * threshold.
+ */
+static __be32 *xdr_check_write_chunk(__be32 *p, const __be32 *end,
+ u32 maxlen)
+{
+ u32 i, segcount;
+
+ segcount = be32_to_cpup(p++);
+ for (i = 0; i < segcount; i++) {
+ p++; /* handle */
+ if (be32_to_cpup(p++) > maxlen)
+ return NULL;
+ p += 2; /* offset */
+
+ if (p > end)
+ return NULL;
}
- /* Read list may need XDR round-up (see RFC 5666, s. 3.7) */
- if (page_offset & 3) {
- u32 pad = 4 - (page_offset & 3);
+ return p;
+}
- head->arg.tail[0].iov_len += pad;
- head->arg.len += pad;
- head->arg.buflen += pad;
- page_offset += pad;
+/* Sanity check the Write list.
+ *
+ * Implementation limits:
+ * - This implementation supports only one Write chunk.
+ *
+ * Sanity checks:
+ * - Write list does not overflow buffer.
+ * - Segment size limited by largest NFS data payload.
+ *
+ * Returns pointer to the following Reply chunk.
+ */
+static __be32 *xdr_check_write_list(__be32 *p, const __be32 *end)
+{
+ u32 chcount;
+
+ chcount = 0;
+ while (*p++ != xdr_zero) {
+ p = xdr_check_write_chunk(p, end, MAX_BYTES_WRITE_SEG);
+ if (!p)
+ return NULL;
+ if (chcount++ > 1)
+ return NULL;
+ }
+ return p;
+}
+
+/* Sanity check the Reply chunk.
+ *
+ * Sanity checks:
+ * - Reply chunk does not overflow buffer.
+ * - Segment size limited by largest NFS data payload.
+ *
+ * Returns pointer to the following RPC header.
+ */
+static __be32 *xdr_check_reply_chunk(__be32 *p, const __be32 *end)
+{
+ if (*p++ != xdr_zero) {
+ p = xdr_check_write_chunk(p, end, MAX_BYTES_SPECIAL_SEG);
+ if (!p)
+ return NULL;
+ }
+ return p;
+}
+
+/* On entry, xdr->head[0].iov_base points to first byte in the
+ * RPC-over-RDMA header.
+ *
+ * On successful exit, head[0] points to first byte past the
+ * RPC-over-RDMA header. For RDMA_MSG, this is the RPC message.
+ * The length of the RPC-over-RDMA header is returned.
+ *
+ * Assumptions:
+ * - The transport header is entirely contained in the head iovec.
+ */
+static int svc_rdma_xdr_decode_req(struct xdr_buf *rq_arg)
+{
+ __be32 *p, *end, *rdma_argp;
+ unsigned int hdr_len;
+ char *proc;
+
+ /* Verify that there's enough bytes for header + something */
+ if (rq_arg->len <= RPCRDMA_HDRLEN_ERR)
+ goto out_short;
+
+ rdma_argp = rq_arg->head[0].iov_base;
+ if (*(rdma_argp + 1) != rpcrdma_version)
+ goto out_version;
+
+ switch (*(rdma_argp + 3)) {
+ case rdma_msg:
+ proc = "RDMA_MSG";
+ break;
+ case rdma_nomsg:
+ proc = "RDMA_NOMSG";
+ break;
+
+ case rdma_done:
+ goto out_drop;
+
+ case rdma_error:
+ goto out_drop;
+
+ default:
+ goto out_proc;
}
- ret = 1;
- if (position && position < head->arg.head[0].iov_len)
- ret = rdma_copy_tail(rqstp, head, position,
- byte_count, page_offset, page_no);
- head->arg.head[0].iov_len = position;
- head->position = position;
+ end = (__be32 *)((unsigned long)rdma_argp + rq_arg->len);
+ p = xdr_check_read_list(rdma_argp + 4, end);
+ if (!p)
+ goto out_inval;
+ p = xdr_check_write_list(p, end);
+ if (!p)
+ goto out_inval;
+ p = xdr_check_reply_chunk(p, end);
+ if (!p)
+ goto out_inval;
+ if (p > end)
+ goto out_inval;
- err:
- /* Detach arg pages. svc_recv will replenish them */
- for (page_no = 0;
- &rqstp->rq_pages[page_no] < rqstp->rq_respages; page_no++)
- rqstp->rq_pages[page_no] = NULL;
+ rq_arg->head[0].iov_base = p;
+ hdr_len = (unsigned long)p - (unsigned long)rdma_argp;
+ rq_arg->head[0].iov_len -= hdr_len;
+ rq_arg->len -= hdr_len;
+ dprintk("svcrdma: received %s request for XID 0x%08x, hdr_len=%u\n",
+ proc, be32_to_cpup(rdma_argp), hdr_len);
+ return hdr_len;
- return ret;
+out_short:
+ dprintk("svcrdma: header too short = %d\n", rq_arg->len);
+ return -EINVAL;
+
+out_version:
+ dprintk("svcrdma: bad xprt version: %u\n",
+ be32_to_cpup(rdma_argp + 1));
+ return -EPROTONOSUPPORT;
+
+out_drop:
+ dprintk("svcrdma: dropping RDMA_DONE/ERROR message\n");
+ return 0;
+
+out_proc:
+ dprintk("svcrdma: bad rdma procedure (%u)\n",
+ be32_to_cpup(rdma_argp + 3));
+ return -EINVAL;
+
+out_inval:
+ dprintk("svcrdma: failed to parse transport header\n");
+ return -EINVAL;
}
static void rdma_read_complete(struct svc_rqst *rqstp,
@@ -528,24 +376,9 @@
rqstp->rq_pages[page_no] = head->pages[page_no];
}
- /* Adjustments made for RDMA_NOMSG type requests */
- if (head->position == 0) {
- if (head->arg.len <= head->sge[0].length) {
- head->arg.head[0].iov_len = head->arg.len -
- head->byte_len;
- head->arg.page_len = 0;
- } else {
- head->arg.head[0].iov_len = head->sge[0].length -
- head->byte_len;
- head->arg.page_len = head->arg.len -
- head->sge[0].length;
- }
- }
-
/* Point rq_arg.pages past header */
rqstp->rq_arg.pages = &rqstp->rq_pages[head->hdr_count];
rqstp->rq_arg.page_len = head->arg.page_len;
- rqstp->rq_arg.page_base = head->arg.page_base;
/* rq_respages starts after the last arg page */
rqstp->rq_respages = &rqstp->rq_pages[page_no];
@@ -642,21 +475,44 @@
return true;
}
-/*
- * Set up the rqstp thread context to point to the RQ buffer. If
- * necessary, pull additional data from the client with an RDMA_READ
- * request.
+/**
+ * svc_rdma_recvfrom - Receive an RPC call
+ * @rqstp: request structure into which to receive an RPC Call
+ *
+ * Returns:
+ * The positive number of bytes in the RPC Call message,
+ * %0 if there were no Calls ready to return,
+ * %-EINVAL if the Read chunk data is too large,
+ * %-ENOMEM if rdma_rw context pool was exhausted,
+ * %-ENOTCONN if posting failed (connection is lost),
+ * %-EIO if rdma_rw initialization failed (DMA mapping, etc).
+ *
+ * Called in a loop when XPT_DATA is set. XPT_DATA is cleared only
+ * when there are no remaining ctxt's to process.
+ *
+ * The next ctxt is removed from the "receive" lists.
+ *
+ * - If the ctxt completes a Read, then finish assembling the Call
+ * message and return the number of bytes in the message.
+ *
+ * - If the ctxt completes a Receive, then construct the Call
+ * message from the contents of the Receive buffer.
+ *
+ * - If there are no Read chunks in this message, then finish
+ * assembling the Call message and return the number of bytes
+ * in the message.
+ *
+ * - If there are Read chunks in this message, post Read WRs to
+ * pull that payload and return 0.
*/
int svc_rdma_recvfrom(struct svc_rqst *rqstp)
{
struct svc_xprt *xprt = rqstp->rq_xprt;
struct svcxprt_rdma *rdma_xprt =
container_of(xprt, struct svcxprt_rdma, sc_xprt);
- struct svc_rdma_op_ctxt *ctxt = NULL;
- struct rpcrdma_msg *rmsgp;
- int ret = 0;
-
- dprintk("svcrdma: rqstp=%p\n", rqstp);
+ struct svc_rdma_op_ctxt *ctxt;
+ __be32 *p;
+ int ret;
spin_lock(&rdma_xprt->sc_rq_dto_lock);
if (!list_empty(&rdma_xprt->sc_read_complete_q)) {
@@ -671,22 +527,14 @@
struct svc_rdma_op_ctxt, list);
list_del(&ctxt->list);
} else {
- atomic_inc(&rdma_stat_rq_starve);
+ /* No new incoming requests, terminate the loop */
clear_bit(XPT_DATA, &xprt->xpt_flags);
- ctxt = NULL;
+ spin_unlock(&rdma_xprt->sc_rq_dto_lock);
+ return 0;
}
spin_unlock(&rdma_xprt->sc_rq_dto_lock);
- if (!ctxt) {
- /* This is the EAGAIN path. The svc_recv routine will
- * return -EAGAIN, the nfsd thread will go to call into
- * svc_recv again and we shouldn't be on the active
- * transport list
- */
- if (test_bit(XPT_CLOSE, &xprt->xpt_flags))
- goto defer;
- goto out;
- }
- dprintk("svcrdma: processing ctxt=%p on xprt=%p, rqstp=%p\n",
+
+ dprintk("svcrdma: recvfrom: ctxt=%p on xprt=%p, rqstp=%p\n",
ctxt, rdma_xprt, rqstp);
atomic_inc(&rdma_stat_recv);
@@ -694,7 +542,7 @@
rdma_build_arg_xdr(rqstp, ctxt, ctxt->byte_len);
/* Decode the RDMA header. */
- rmsgp = (struct rpcrdma_msg *)rqstp->rq_arg.head[0].iov_base;
+ p = (__be32 *)rqstp->rq_arg.head[0].iov_base;
ret = svc_rdma_xdr_decode_req(&rqstp->rq_arg);
if (ret < 0)
goto out_err;
@@ -702,9 +550,8 @@
goto out_drop;
rqstp->rq_xprt_hlen = ret;
- if (svc_rdma_is_backchannel_reply(xprt, &rmsgp->rm_xid)) {
- ret = svc_rdma_handle_bc_reply(xprt->xpt_bc_xprt,
- &rmsgp->rm_xid,
+ if (svc_rdma_is_backchannel_reply(xprt, p)) {
+ ret = svc_rdma_handle_bc_reply(xprt->xpt_bc_xprt, p,
&rqstp->rq_arg);
svc_rdma_put_context(ctxt, 0);
if (ret)
@@ -712,39 +559,34 @@
return ret;
}
- /* Read read-list data. */
- ret = rdma_read_chunks(rdma_xprt, rmsgp, rqstp, ctxt);
- if (ret > 0) {
- /* read-list posted, defer until data received from client. */
- goto defer;
- } else if (ret < 0) {
- /* Post of read-list failed, free context. */
- svc_rdma_put_context(ctxt, 1);
- return 0;
- }
+ p += rpcrdma_fixed_maxsz;
+ if (*p != xdr_zero)
+ goto out_readchunk;
complete:
- ret = rqstp->rq_arg.head[0].iov_len
- + rqstp->rq_arg.page_len
- + rqstp->rq_arg.tail[0].iov_len;
svc_rdma_put_context(ctxt, 0);
- out:
- dprintk("svcrdma: ret=%d, rq_arg.len=%u, "
- "rq_arg.head[0].iov_base=%p, rq_arg.head[0].iov_len=%zd\n",
- ret, rqstp->rq_arg.len,
- rqstp->rq_arg.head[0].iov_base,
- rqstp->rq_arg.head[0].iov_len);
+ dprintk("svcrdma: recvfrom: xprt=%p, rqstp=%p, rq_arg.len=%u\n",
+ rdma_xprt, rqstp, rqstp->rq_arg.len);
rqstp->rq_prot = IPPROTO_MAX;
svc_xprt_copy_addrs(rqstp, xprt);
- return ret;
+ return rqstp->rq_arg.len;
+
+out_readchunk:
+ ret = svc_rdma_recv_read_chunk(rdma_xprt, rqstp, ctxt, p);
+ if (ret < 0)
+ goto out_postfail;
+ return 0;
out_err:
- svc_rdma_send_error(rdma_xprt, &rmsgp->rm_xid, ret);
+ svc_rdma_send_error(rdma_xprt, p, ret);
svc_rdma_put_context(ctxt, 0);
return 0;
-defer:
- return 0;
+out_postfail:
+ if (ret == -EINVAL)
+ svc_rdma_send_error(rdma_xprt, p, ret);
+ svc_rdma_put_context(ctxt, 1);
+ return ret;
out_drop:
svc_rdma_put_context(ctxt, 1);
diff --git a/net/sunrpc/xprtrdma/svc_rdma_rw.c b/net/sunrpc/xprtrdma/svc_rdma_rw.c
index 0cf6202..933f79b 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_rw.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_rw.c
@@ -12,6 +12,9 @@
#define RPCDBG_FACILITY RPCDBG_SVCXPRT
+static void svc_rdma_write_done(struct ib_cq *cq, struct ib_wc *wc);
+static void svc_rdma_wc_read_done(struct ib_cq *cq, struct ib_wc *wc);
+
/* Each R/W context contains state for one chain of RDMA Read or
* Write Work Requests.
*
@@ -113,22 +116,20 @@
struct svcxprt_rdma *cc_rdma;
struct list_head cc_rwctxts;
int cc_sqecount;
- enum dma_data_direction cc_dir;
};
static void svc_rdma_cc_init(struct svcxprt_rdma *rdma,
- struct svc_rdma_chunk_ctxt *cc,
- enum dma_data_direction dir)
+ struct svc_rdma_chunk_ctxt *cc)
{
cc->cc_rdma = rdma;
svc_xprt_get(&rdma->sc_xprt);
INIT_LIST_HEAD(&cc->cc_rwctxts);
cc->cc_sqecount = 0;
- cc->cc_dir = dir;
}
-static void svc_rdma_cc_release(struct svc_rdma_chunk_ctxt *cc)
+static void svc_rdma_cc_release(struct svc_rdma_chunk_ctxt *cc,
+ enum dma_data_direction dir)
{
struct svcxprt_rdma *rdma = cc->cc_rdma;
struct svc_rdma_rw_ctxt *ctxt;
@@ -138,7 +139,7 @@
rdma_rw_ctx_destroy(&ctxt->rw_ctx, rdma->sc_qp,
rdma->sc_port_num, ctxt->rw_sg_table.sgl,
- ctxt->rw_nents, cc->cc_dir);
+ ctxt->rw_nents, dir);
svc_rdma_put_rw_ctxt(rdma, ctxt);
}
svc_xprt_put(&rdma->sc_xprt);
@@ -176,13 +177,14 @@
info->wi_seg_no = 0;
info->wi_nsegs = be32_to_cpup(++chunk);
info->wi_segs = ++chunk;
- svc_rdma_cc_init(rdma, &info->wi_cc, DMA_TO_DEVICE);
+ svc_rdma_cc_init(rdma, &info->wi_cc);
+ info->wi_cc.cc_cqe.done = svc_rdma_write_done;
return info;
}
static void svc_rdma_write_info_free(struct svc_rdma_write_info *info)
{
- svc_rdma_cc_release(&info->wi_cc);
+ svc_rdma_cc_release(&info->wi_cc, DMA_TO_DEVICE);
kfree(info);
}
@@ -216,6 +218,76 @@
svc_rdma_write_info_free(info);
}
+/* State for pulling a Read chunk.
+ */
+struct svc_rdma_read_info {
+ struct svc_rdma_op_ctxt *ri_readctxt;
+ unsigned int ri_position;
+ unsigned int ri_pageno;
+ unsigned int ri_pageoff;
+ unsigned int ri_chunklen;
+
+ struct svc_rdma_chunk_ctxt ri_cc;
+};
+
+static struct svc_rdma_read_info *
+svc_rdma_read_info_alloc(struct svcxprt_rdma *rdma)
+{
+ struct svc_rdma_read_info *info;
+
+ info = kmalloc(sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return info;
+
+ svc_rdma_cc_init(rdma, &info->ri_cc);
+ info->ri_cc.cc_cqe.done = svc_rdma_wc_read_done;
+ return info;
+}
+
+static void svc_rdma_read_info_free(struct svc_rdma_read_info *info)
+{
+ svc_rdma_cc_release(&info->ri_cc, DMA_FROM_DEVICE);
+ kfree(info);
+}
+
+/**
+ * svc_rdma_wc_read_done - Handle completion of an RDMA Read ctx
+ * @cq: controlling Completion Queue
+ * @wc: Work Completion
+ *
+ */
+static void svc_rdma_wc_read_done(struct ib_cq *cq, struct ib_wc *wc)
+{
+ struct ib_cqe *cqe = wc->wr_cqe;
+ struct svc_rdma_chunk_ctxt *cc =
+ container_of(cqe, struct svc_rdma_chunk_ctxt, cc_cqe);
+ struct svcxprt_rdma *rdma = cc->cc_rdma;
+ struct svc_rdma_read_info *info =
+ container_of(cc, struct svc_rdma_read_info, ri_cc);
+
+ atomic_add(cc->cc_sqecount, &rdma->sc_sq_avail);
+ wake_up(&rdma->sc_send_wait);
+
+ if (unlikely(wc->status != IB_WC_SUCCESS)) {
+ set_bit(XPT_CLOSE, &rdma->sc_xprt.xpt_flags);
+ if (wc->status != IB_WC_WR_FLUSH_ERR)
+ pr_err("svcrdma: read ctx: %s (%u/0x%x)\n",
+ ib_wc_status_msg(wc->status),
+ wc->status, wc->vendor_err);
+ svc_rdma_put_context(info->ri_readctxt, 1);
+ } else {
+ spin_lock(&rdma->sc_rq_dto_lock);
+ list_add_tail(&info->ri_readctxt->list,
+ &rdma->sc_read_complete_q);
+ spin_unlock(&rdma->sc_rq_dto_lock);
+
+ set_bit(XPT_DATA, &rdma->sc_xprt.xpt_flags);
+ svc_xprt_enqueue(&rdma->sc_xprt);
+ }
+
+ svc_rdma_read_info_free(info);
+}
+
/* This function sleeps when the transport's Send Queue is congested.
*
* Assumptions:
@@ -232,6 +304,9 @@
struct ib_cqe *cqe;
int ret;
+ if (cc->cc_sqecount > rdma->sc_sq_depth)
+ return -EINVAL;
+
first_wr = NULL;
cqe = &cc->cc_cqe;
list_for_each(tmp, &cc->cc_rwctxts) {
@@ -295,8 +370,9 @@
struct scatterlist *sg;
struct page **page;
- page_off = (info->wi_next_off + xdr->page_base) & ~PAGE_MASK;
- page_no = (info->wi_next_off + xdr->page_base) >> PAGE_SHIFT;
+ page_off = info->wi_next_off + xdr->page_base;
+ page_no = page_off >> PAGE_SHIFT;
+ page_off = offset_in_page(page_off);
page = xdr->pages + page_no;
info->wi_next_off += remaining;
sg = ctxt->rw_sg_table.sgl;
@@ -332,7 +408,6 @@
__be32 *seg;
int ret;
- cc->cc_cqe.done = svc_rdma_write_done;
seg = info->wi_segs + info->wi_seg_no * rpcrdma_segment_maxsz;
do {
unsigned int write_len;
@@ -425,6 +500,7 @@
*
* Returns a non-negative number of bytes the chunk consumed, or
* %-E2BIG if the payload was larger than the Write chunk,
+ * %-EINVAL if client provided too many segments,
* %-ENOMEM if rdma_rw context pool was exhausted,
* %-ENOTCONN if posting failed (connection is lost),
* %-EIO if rdma_rw initialization failed (DMA mapping, etc).
@@ -465,6 +541,7 @@
*
* Returns a non-negative number of bytes the chunk consumed, or
* %-E2BIG if the payload was larger than the Reply chunk,
+ * %-EINVAL if client provided too many segments,
* %-ENOMEM if rdma_rw context pool was exhausted,
* %-ENOTCONN if posting failed (connection is lost),
* %-EIO if rdma_rw initialization failed (DMA mapping, etc).
@@ -510,3 +587,353 @@
svc_rdma_write_info_free(info);
return ret;
}
+
+static int svc_rdma_build_read_segment(struct svc_rdma_read_info *info,
+ struct svc_rqst *rqstp,
+ u32 rkey, u32 len, u64 offset)
+{
+ struct svc_rdma_op_ctxt *head = info->ri_readctxt;
+ struct svc_rdma_chunk_ctxt *cc = &info->ri_cc;
+ struct svc_rdma_rw_ctxt *ctxt;
+ unsigned int sge_no, seg_len;
+ struct scatterlist *sg;
+ int ret;
+
+ sge_no = PAGE_ALIGN(info->ri_pageoff + len) >> PAGE_SHIFT;
+ ctxt = svc_rdma_get_rw_ctxt(cc->cc_rdma, sge_no);
+ if (!ctxt)
+ goto out_noctx;
+ ctxt->rw_nents = sge_no;
+
+ dprintk("svcrdma: reading segment %u@0x%016llx:0x%08x (%u sges)\n",
+ len, offset, rkey, sge_no);
+
+ sg = ctxt->rw_sg_table.sgl;
+ for (sge_no = 0; sge_no < ctxt->rw_nents; sge_no++) {
+ seg_len = min_t(unsigned int, len,
+ PAGE_SIZE - info->ri_pageoff);
+
+ head->arg.pages[info->ri_pageno] =
+ rqstp->rq_pages[info->ri_pageno];
+ if (!info->ri_pageoff)
+ head->count++;
+
+ sg_set_page(sg, rqstp->rq_pages[info->ri_pageno],
+ seg_len, info->ri_pageoff);
+ sg = sg_next(sg);
+
+ info->ri_pageoff += seg_len;
+ if (info->ri_pageoff == PAGE_SIZE) {
+ info->ri_pageno++;
+ info->ri_pageoff = 0;
+ }
+ len -= seg_len;
+
+ /* Safety check */
+ if (len &&
+ &rqstp->rq_pages[info->ri_pageno + 1] > rqstp->rq_page_end)
+ goto out_overrun;
+ }
+
+ ret = rdma_rw_ctx_init(&ctxt->rw_ctx, cc->cc_rdma->sc_qp,
+ cc->cc_rdma->sc_port_num,
+ ctxt->rw_sg_table.sgl, ctxt->rw_nents,
+ 0, offset, rkey, DMA_FROM_DEVICE);
+ if (ret < 0)
+ goto out_initerr;
+
+ list_add(&ctxt->rw_list, &cc->cc_rwctxts);
+ cc->cc_sqecount += ret;
+ return 0;
+
+out_noctx:
+ dprintk("svcrdma: no R/W ctxs available\n");
+ return -ENOMEM;
+
+out_overrun:
+ dprintk("svcrdma: request overruns rq_pages\n");
+ return -EINVAL;
+
+out_initerr:
+ svc_rdma_put_rw_ctxt(cc->cc_rdma, ctxt);
+ pr_err("svcrdma: failed to map pagelist (%d)\n", ret);
+ return -EIO;
+}
+
+static int svc_rdma_build_read_chunk(struct svc_rqst *rqstp,
+ struct svc_rdma_read_info *info,
+ __be32 *p)
+{
+ int ret;
+
+ info->ri_chunklen = 0;
+ while (*p++ != xdr_zero) {
+ u32 rs_handle, rs_length;
+ u64 rs_offset;
+
+ if (be32_to_cpup(p++) != info->ri_position)
+ break;
+ rs_handle = be32_to_cpup(p++);
+ rs_length = be32_to_cpup(p++);
+ p = xdr_decode_hyper(p, &rs_offset);
+
+ ret = svc_rdma_build_read_segment(info, rqstp,
+ rs_handle, rs_length,
+ rs_offset);
+ if (ret < 0)
+ break;
+
+ info->ri_chunklen += rs_length;
+ }
+
+ return ret;
+}
+
+/* If there is inline content following the Read chunk, append it to
+ * the page list immediately following the data payload. This has to
+ * be done after the reader function has determined how many pages
+ * were consumed for RDMA Read.
+ *
+ * On entry, ri_pageno and ri_pageoff point directly to the end of the
+ * page list. On exit, both have been updated to the new "next byte".
+ *
+ * Assumptions:
+ * - Inline content fits entirely in rq_pages[0]
+ * - Trailing content is only a handful of bytes
+ */
+static int svc_rdma_copy_tail(struct svc_rqst *rqstp,
+ struct svc_rdma_read_info *info)
+{
+ struct svc_rdma_op_ctxt *head = info->ri_readctxt;
+ unsigned int tail_length, remaining;
+ u8 *srcp, *destp;
+
+ /* Assert that all inline content fits in page 0. This is an
+ * implementation limit, not a protocol limit.
+ */
+ if (head->arg.head[0].iov_len > PAGE_SIZE) {
+ pr_warn_once("svcrdma: too much trailing inline content\n");
+ return -EINVAL;
+ }
+
+ srcp = head->arg.head[0].iov_base;
+ srcp += info->ri_position;
+ tail_length = head->arg.head[0].iov_len - info->ri_position;
+ remaining = tail_length;
+
+ /* If there is room on the last page in the page list, try to
+ * fit the trailing content there.
+ */
+ if (info->ri_pageoff > 0) {
+ unsigned int len;
+
+ len = min_t(unsigned int, remaining,
+ PAGE_SIZE - info->ri_pageoff);
+ destp = page_address(rqstp->rq_pages[info->ri_pageno]);
+ destp += info->ri_pageoff;
+
+ memcpy(destp, srcp, len);
+ srcp += len;
+ destp += len;
+ info->ri_pageoff += len;
+ remaining -= len;
+
+ if (info->ri_pageoff == PAGE_SIZE) {
+ info->ri_pageno++;
+ info->ri_pageoff = 0;
+ }
+ }
+
+ /* Otherwise, a fresh page is needed. */
+ if (remaining) {
+ head->arg.pages[info->ri_pageno] =
+ rqstp->rq_pages[info->ri_pageno];
+ head->count++;
+
+ destp = page_address(rqstp->rq_pages[info->ri_pageno]);
+ memcpy(destp, srcp, remaining);
+ info->ri_pageoff += remaining;
+ }
+
+ head->arg.page_len += tail_length;
+ head->arg.len += tail_length;
+ head->arg.buflen += tail_length;
+ return 0;
+}
+
+/* Construct RDMA Reads to pull over a normal Read chunk. The chunk
+ * data lands in the page list of head->arg.pages.
+ *
+ * Currently NFSD does not look at the head->arg.tail[0] iovec.
+ * Therefore, XDR round-up of the Read chunk and trailing
+ * inline content must both be added at the end of the pagelist.
+ */
+static int svc_rdma_build_normal_read_chunk(struct svc_rqst *rqstp,
+ struct svc_rdma_read_info *info,
+ __be32 *p)
+{
+ struct svc_rdma_op_ctxt *head = info->ri_readctxt;
+ int ret;
+
+ dprintk("svcrdma: Reading Read chunk at position %u\n",
+ info->ri_position);
+
+ info->ri_pageno = head->hdr_count;
+ info->ri_pageoff = 0;
+
+ ret = svc_rdma_build_read_chunk(rqstp, info, p);
+ if (ret < 0)
+ goto out;
+
+ /* Read chunk may need XDR round-up (see RFC 5666, s. 3.7).
+ */
+ if (info->ri_chunklen & 3) {
+ u32 padlen = 4 - (info->ri_chunklen & 3);
+
+ info->ri_chunklen += padlen;
+
+ /* NB: data payload always starts on XDR alignment,
+ * thus the pad can never contain a page boundary.
+ */
+ info->ri_pageoff += padlen;
+ if (info->ri_pageoff == PAGE_SIZE) {
+ info->ri_pageno++;
+ info->ri_pageoff = 0;
+ }
+ }
+
+ head->arg.page_len = info->ri_chunklen;
+ head->arg.len += info->ri_chunklen;
+ head->arg.buflen += info->ri_chunklen;
+
+ if (info->ri_position < head->arg.head[0].iov_len) {
+ ret = svc_rdma_copy_tail(rqstp, info);
+ if (ret < 0)
+ goto out;
+ }
+ head->arg.head[0].iov_len = info->ri_position;
+
+out:
+ return ret;
+}
+
+/* Construct RDMA Reads to pull over a Position Zero Read chunk.
+ * The start of the data lands in the first page just after
+ * the Transport header, and the rest lands in the page list of
+ * head->arg.pages.
+ *
+ * Assumptions:
+ * - A PZRC has an XDR-aligned length (no implicit round-up).
+ * - There can be no trailing inline content (IOW, we assume
+ * a PZRC is never sent in an RDMA_MSG message, though it's
+ * allowed by spec).
+ */
+static int svc_rdma_build_pz_read_chunk(struct svc_rqst *rqstp,
+ struct svc_rdma_read_info *info,
+ __be32 *p)
+{
+ struct svc_rdma_op_ctxt *head = info->ri_readctxt;
+ int ret;
+
+ dprintk("svcrdma: Reading Position Zero Read chunk\n");
+
+ info->ri_pageno = head->hdr_count - 1;
+ info->ri_pageoff = offset_in_page(head->byte_len);
+
+ ret = svc_rdma_build_read_chunk(rqstp, info, p);
+ if (ret < 0)
+ goto out;
+
+ head->arg.len += info->ri_chunklen;
+ head->arg.buflen += info->ri_chunklen;
+
+ if (head->arg.buflen <= head->sge[0].length) {
+ /* Transport header and RPC message fit entirely
+ * in page where head iovec resides.
+ */
+ head->arg.head[0].iov_len = info->ri_chunklen;
+ } else {
+ /* Transport header and part of RPC message reside
+ * in the head iovec's page.
+ */
+ head->arg.head[0].iov_len =
+ head->sge[0].length - head->byte_len;
+ head->arg.page_len =
+ info->ri_chunklen - head->arg.head[0].iov_len;
+ }
+
+out:
+ return ret;
+}
+
+/**
+ * svc_rdma_recv_read_chunk - Pull a Read chunk from the client
+ * @rdma: controlling RDMA transport
+ * @rqstp: set of pages to use as Read sink buffers
+ * @head: pages under I/O collect here
+ * @p: pointer to start of Read chunk
+ *
+ * Returns:
+ * %0 if all needed RDMA Reads were posted successfully,
+ * %-EINVAL if client provided too many segments,
+ * %-ENOMEM if rdma_rw context pool was exhausted,
+ * %-ENOTCONN if posting failed (connection is lost),
+ * %-EIO if rdma_rw initialization failed (DMA mapping, etc).
+ *
+ * Assumptions:
+ * - All Read segments in @p have the same Position value.
+ */
+int svc_rdma_recv_read_chunk(struct svcxprt_rdma *rdma, struct svc_rqst *rqstp,
+ struct svc_rdma_op_ctxt *head, __be32 *p)
+{
+ struct svc_rdma_read_info *info;
+ struct page **page;
+ int ret;
+
+ /* The request (with page list) is constructed in
+ * head->arg. Pages involved with RDMA Read I/O are
+ * transferred there.
+ */
+ head->hdr_count = head->count;
+ head->arg.head[0] = rqstp->rq_arg.head[0];
+ head->arg.tail[0] = rqstp->rq_arg.tail[0];
+ head->arg.pages = head->pages;
+ head->arg.page_base = 0;
+ head->arg.page_len = 0;
+ head->arg.len = rqstp->rq_arg.len;
+ head->arg.buflen = rqstp->rq_arg.buflen;
+
+ info = svc_rdma_read_info_alloc(rdma);
+ if (!info)
+ return -ENOMEM;
+ info->ri_readctxt = head;
+
+ info->ri_position = be32_to_cpup(p + 1);
+ if (info->ri_position)
+ ret = svc_rdma_build_normal_read_chunk(rqstp, info, p);
+ else
+ ret = svc_rdma_build_pz_read_chunk(rqstp, info, p);
+
+ /* Mark the start of the pages that can be used for the reply */
+ if (info->ri_pageoff > 0)
+ info->ri_pageno++;
+ rqstp->rq_respages = &rqstp->rq_pages[info->ri_pageno];
+ rqstp->rq_next_page = rqstp->rq_respages + 1;
+
+ if (ret < 0)
+ goto out;
+
+ ret = svc_rdma_post_chunk_ctxt(&info->ri_cc);
+
+out:
+ /* Read sink pages have been moved from rqstp->rq_pages to
+ * head->arg.pages. Force svc_recv to refill those slots
+ * in rq_pages.
+ */
+ for (page = rqstp->rq_pages; page < rqstp->rq_respages; page++)
+ *page = NULL;
+
+ if (ret < 0)
+ svc_rdma_read_info_free(info);
+ return ret;
+}
diff --git a/net/sunrpc/xprtrdma/svc_rdma_sendto.c b/net/sunrpc/xprtrdma/svc_rdma_sendto.c
index 1736337..7c3a211 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_sendto.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_sendto.c
@@ -313,13 +313,17 @@
dma_addr = ib_dma_map_page(dev, virt_to_page(base),
offset, len, DMA_TO_DEVICE);
if (ib_dma_mapping_error(dev, dma_addr))
- return -EIO;
+ goto out_maperr;
ctxt->sge[sge_no].addr = dma_addr;
ctxt->sge[sge_no].length = len;
ctxt->sge[sge_no].lkey = rdma->sc_pd->local_dma_lkey;
svc_rdma_count_mappings(rdma, ctxt);
return 0;
+
+out_maperr:
+ pr_err("svcrdma: failed to map buffer\n");
+ return -EIO;
}
static int svc_rdma_dma_map_page(struct svcxprt_rdma *rdma,
@@ -334,13 +338,17 @@
dma_addr = ib_dma_map_page(dev, page, offset, len, DMA_TO_DEVICE);
if (ib_dma_mapping_error(dev, dma_addr))
- return -EIO;
+ goto out_maperr;
ctxt->sge[sge_no].addr = dma_addr;
ctxt->sge[sge_no].length = len;
ctxt->sge[sge_no].lkey = rdma->sc_pd->local_dma_lkey;
svc_rdma_count_mappings(rdma, ctxt);
return 0;
+
+out_maperr:
+ pr_err("svcrdma: failed to map page\n");
+ return -EIO;
}
/**
@@ -547,7 +555,6 @@
return 0;
err:
- pr_err("svcrdma: failed to post Send WR (%d)\n", ret);
svc_rdma_unmap_dma(ctxt);
svc_rdma_put_context(ctxt, 1);
return ret;
@@ -677,7 +684,7 @@
return 0;
err2:
- if (ret != -E2BIG)
+ if (ret != -E2BIG && ret != -EINVAL)
goto err1;
ret = svc_rdma_post_recv(rdma, GFP_KERNEL);
diff --git a/net/sunrpc/xprtrdma/svc_rdma_transport.c b/net/sunrpc/xprtrdma/svc_rdma_transport.c
index a9d9cb1..e660d49 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_transport.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_transport.c
@@ -202,7 +202,6 @@
out:
ctxt->count = 0;
ctxt->mapped_sges = 0;
- ctxt->frmr = NULL;
return ctxt;
out_empty:
@@ -226,22 +225,13 @@
{
struct svcxprt_rdma *xprt = ctxt->xprt;
struct ib_device *device = xprt->sc_cm_id->device;
- u32 lkey = xprt->sc_pd->local_dma_lkey;
unsigned int i;
- for (i = 0; i < ctxt->mapped_sges; i++) {
- /*
- * Unmap the DMA addr in the SGE if the lkey matches
- * the local_dma_lkey, otherwise, ignore it since it is
- * an FRMR lkey and will be unmapped later when the
- * last WR that uses it completes.
- */
- if (ctxt->sge[i].lkey == lkey)
- ib_dma_unmap_page(device,
- ctxt->sge[i].addr,
- ctxt->sge[i].length,
- ctxt->direction);
- }
+ for (i = 0; i < ctxt->mapped_sges; i++)
+ ib_dma_unmap_page(device,
+ ctxt->sge[i].addr,
+ ctxt->sge[i].length,
+ ctxt->direction);
ctxt->mapped_sges = 0;
}
@@ -346,36 +336,6 @@
svc_xprt_put(&xprt->sc_xprt);
}
-static void svc_rdma_send_wc_common(struct svcxprt_rdma *xprt,
- struct ib_wc *wc,
- const char *opname)
-{
- if (wc->status != IB_WC_SUCCESS)
- goto err;
-
-out:
- atomic_inc(&xprt->sc_sq_avail);
- wake_up(&xprt->sc_send_wait);
- return;
-
-err:
- set_bit(XPT_CLOSE, &xprt->sc_xprt.xpt_flags);
- if (wc->status != IB_WC_WR_FLUSH_ERR)
- pr_err("svcrdma: %s: %s (%u/0x%x)\n",
- opname, ib_wc_status_msg(wc->status),
- wc->status, wc->vendor_err);
- goto out;
-}
-
-static void svc_rdma_send_wc_common_put(struct ib_cq *cq, struct ib_wc *wc,
- const char *opname)
-{
- struct svcxprt_rdma *xprt = cq->cq_context;
-
- svc_rdma_send_wc_common(xprt, wc, opname);
- svc_xprt_put(&xprt->sc_xprt);
-}
-
/**
* svc_rdma_wc_send - Invoked by RDMA provider for each polled Send WC
* @cq: completion queue
@@ -384,73 +344,28 @@
*/
void svc_rdma_wc_send(struct ib_cq *cq, struct ib_wc *wc)
{
- struct ib_cqe *cqe = wc->wr_cqe;
- struct svc_rdma_op_ctxt *ctxt;
-
- svc_rdma_send_wc_common_put(cq, wc, "send");
-
- ctxt = container_of(cqe, struct svc_rdma_op_ctxt, cqe);
- svc_rdma_unmap_dma(ctxt);
- svc_rdma_put_context(ctxt, 1);
-}
-
-/**
- * svc_rdma_wc_reg - Invoked by RDMA provider for each polled FASTREG WC
- * @cq: completion queue
- * @wc: completed WR
- *
- */
-void svc_rdma_wc_reg(struct ib_cq *cq, struct ib_wc *wc)
-{
- svc_rdma_send_wc_common_put(cq, wc, "fastreg");
-}
-
-/**
- * svc_rdma_wc_read - Invoked by RDMA provider for each polled Read WC
- * @cq: completion queue
- * @wc: completed WR
- *
- */
-void svc_rdma_wc_read(struct ib_cq *cq, struct ib_wc *wc)
-{
struct svcxprt_rdma *xprt = cq->cq_context;
struct ib_cqe *cqe = wc->wr_cqe;
struct svc_rdma_op_ctxt *ctxt;
- svc_rdma_send_wc_common(xprt, wc, "read");
+ atomic_inc(&xprt->sc_sq_avail);
+ wake_up(&xprt->sc_send_wait);
ctxt = container_of(cqe, struct svc_rdma_op_ctxt, cqe);
svc_rdma_unmap_dma(ctxt);
- svc_rdma_put_frmr(xprt, ctxt->frmr);
+ svc_rdma_put_context(ctxt, 1);
- if (test_bit(RDMACTXT_F_LAST_CTXT, &ctxt->flags)) {
- struct svc_rdma_op_ctxt *read_hdr;
-
- read_hdr = ctxt->read_hdr;
- spin_lock(&xprt->sc_rq_dto_lock);
- list_add_tail(&read_hdr->list,
- &xprt->sc_read_complete_q);
- spin_unlock(&xprt->sc_rq_dto_lock);
-
- set_bit(XPT_DATA, &xprt->sc_xprt.xpt_flags);
- svc_xprt_enqueue(&xprt->sc_xprt);
+ if (unlikely(wc->status != IB_WC_SUCCESS)) {
+ set_bit(XPT_CLOSE, &xprt->sc_xprt.xpt_flags);
+ if (wc->status != IB_WC_WR_FLUSH_ERR)
+ pr_err("svcrdma: Send: %s (%u/0x%x)\n",
+ ib_wc_status_msg(wc->status),
+ wc->status, wc->vendor_err);
}
- svc_rdma_put_context(ctxt, 0);
svc_xprt_put(&xprt->sc_xprt);
}
-/**
- * svc_rdma_wc_inv - Invoked by RDMA provider for each polled LOCAL_INV WC
- * @cq: completion queue
- * @wc: completed WR
- *
- */
-void svc_rdma_wc_inv(struct ib_cq *cq, struct ib_wc *wc)
-{
- svc_rdma_send_wc_common_put(cq, wc, "localInv");
-}
-
static struct svcxprt_rdma *rdma_create_xprt(struct svc_serv *serv,
int listener)
{
@@ -462,14 +377,12 @@
INIT_LIST_HEAD(&cma_xprt->sc_accept_q);
INIT_LIST_HEAD(&cma_xprt->sc_rq_dto_q);
INIT_LIST_HEAD(&cma_xprt->sc_read_complete_q);
- INIT_LIST_HEAD(&cma_xprt->sc_frmr_q);
INIT_LIST_HEAD(&cma_xprt->sc_ctxts);
INIT_LIST_HEAD(&cma_xprt->sc_rw_ctxts);
init_waitqueue_head(&cma_xprt->sc_send_wait);
spin_lock_init(&cma_xprt->sc_lock);
spin_lock_init(&cma_xprt->sc_rq_dto_lock);
- spin_lock_init(&cma_xprt->sc_frmr_q_lock);
spin_lock_init(&cma_xprt->sc_ctxt_lock);
spin_lock_init(&cma_xprt->sc_rw_ctxt_lock);
@@ -780,86 +693,6 @@
return ERR_PTR(ret);
}
-static struct svc_rdma_fastreg_mr *rdma_alloc_frmr(struct svcxprt_rdma *xprt)
-{
- struct ib_mr *mr;
- struct scatterlist *sg;
- struct svc_rdma_fastreg_mr *frmr;
- u32 num_sg;
-
- frmr = kmalloc(sizeof(*frmr), GFP_KERNEL);
- if (!frmr)
- goto err;
-
- num_sg = min_t(u32, RPCSVC_MAXPAGES, xprt->sc_frmr_pg_list_len);
- mr = ib_alloc_mr(xprt->sc_pd, IB_MR_TYPE_MEM_REG, num_sg);
- if (IS_ERR(mr))
- goto err_free_frmr;
-
- sg = kcalloc(RPCSVC_MAXPAGES, sizeof(*sg), GFP_KERNEL);
- if (!sg)
- goto err_free_mr;
-
- sg_init_table(sg, RPCSVC_MAXPAGES);
-
- frmr->mr = mr;
- frmr->sg = sg;
- INIT_LIST_HEAD(&frmr->frmr_list);
- return frmr;
-
- err_free_mr:
- ib_dereg_mr(mr);
- err_free_frmr:
- kfree(frmr);
- err:
- return ERR_PTR(-ENOMEM);
-}
-
-static void rdma_dealloc_frmr_q(struct svcxprt_rdma *xprt)
-{
- struct svc_rdma_fastreg_mr *frmr;
-
- while (!list_empty(&xprt->sc_frmr_q)) {
- frmr = list_entry(xprt->sc_frmr_q.next,
- struct svc_rdma_fastreg_mr, frmr_list);
- list_del_init(&frmr->frmr_list);
- kfree(frmr->sg);
- ib_dereg_mr(frmr->mr);
- kfree(frmr);
- }
-}
-
-struct svc_rdma_fastreg_mr *svc_rdma_get_frmr(struct svcxprt_rdma *rdma)
-{
- struct svc_rdma_fastreg_mr *frmr = NULL;
-
- spin_lock(&rdma->sc_frmr_q_lock);
- if (!list_empty(&rdma->sc_frmr_q)) {
- frmr = list_entry(rdma->sc_frmr_q.next,
- struct svc_rdma_fastreg_mr, frmr_list);
- list_del_init(&frmr->frmr_list);
- frmr->sg_nents = 0;
- }
- spin_unlock(&rdma->sc_frmr_q_lock);
- if (frmr)
- return frmr;
-
- return rdma_alloc_frmr(rdma);
-}
-
-void svc_rdma_put_frmr(struct svcxprt_rdma *rdma,
- struct svc_rdma_fastreg_mr *frmr)
-{
- if (frmr) {
- ib_dma_unmap_sg(rdma->sc_cm_id->device,
- frmr->sg, frmr->sg_nents, frmr->direction);
- spin_lock(&rdma->sc_frmr_q_lock);
- WARN_ON_ONCE(!list_empty(&frmr->frmr_list));
- list_add(&frmr->frmr_list, &rdma->sc_frmr_q);
- spin_unlock(&rdma->sc_frmr_q_lock);
- }
-}
-
/*
* This is the xpo_recvfrom function for listening endpoints. Its
* purpose is to accept incoming connections. The CMA callback handler
@@ -908,8 +741,6 @@
* capabilities of this particular device */
newxprt->sc_max_sge = min((size_t)dev->attrs.max_sge,
(size_t)RPCSVC_MAXPAGES);
- newxprt->sc_max_sge_rd = min_t(size_t, dev->attrs.max_sge_rd,
- RPCSVC_MAXPAGES);
newxprt->sc_max_req_size = svcrdma_max_req_size;
newxprt->sc_max_requests = min_t(u32, dev->attrs.max_qp_wr,
svcrdma_max_requests);
@@ -952,7 +783,7 @@
memset(&qp_attr, 0, sizeof qp_attr);
qp_attr.event_handler = qp_event_handler;
qp_attr.qp_context = &newxprt->sc_xprt;
- qp_attr.port_num = newxprt->sc_cm_id->port_num;
+ qp_attr.port_num = newxprt->sc_port_num;
qp_attr.cap.max_rdma_ctxs = newxprt->sc_max_requests;
qp_attr.cap.max_send_wr = newxprt->sc_sq_depth;
qp_attr.cap.max_recv_wr = newxprt->sc_rq_depth;
@@ -976,47 +807,12 @@
}
newxprt->sc_qp = newxprt->sc_cm_id->qp;
- /*
- * Use the most secure set of MR resources based on the
- * transport type and available memory management features in
- * the device. Here's the table implemented below:
- *
- * Fast Global DMA Remote WR
- * Reg LKEY MR Access
- * Sup'd Sup'd Needed Needed
- *
- * IWARP N N Y Y
- * N Y Y Y
- * Y N Y N
- * Y Y N -
- *
- * IB N N Y N
- * N Y N -
- * Y N Y N
- * Y Y N -
- *
- * NB: iWARP requires remote write access for the data sink
- * of an RDMA_READ. IB does not.
- */
- newxprt->sc_reader = rdma_read_chunk_lcl;
- if (dev->attrs.device_cap_flags & IB_DEVICE_MEM_MGT_EXTENSIONS) {
- newxprt->sc_frmr_pg_list_len =
- dev->attrs.max_fast_reg_page_list_len;
- newxprt->sc_dev_caps |= SVCRDMA_DEVCAP_FAST_REG;
- newxprt->sc_reader = rdma_read_chunk_frmr;
- } else
+ if (!(dev->attrs.device_cap_flags & IB_DEVICE_MEM_MGT_EXTENSIONS))
newxprt->sc_snd_w_inv = false;
-
- /*
- * Determine if a DMA MR is required and if so, what privs are required
- */
- if (!rdma_protocol_iwarp(dev, newxprt->sc_cm_id->port_num) &&
- !rdma_ib_or_roce(dev, newxprt->sc_cm_id->port_num))
+ if (!rdma_protocol_iwarp(dev, newxprt->sc_port_num) &&
+ !rdma_ib_or_roce(dev, newxprt->sc_port_num))
goto errout;
- if (rdma_protocol_iwarp(dev, newxprt->sc_cm_id->port_num))
- newxprt->sc_dev_caps |= SVCRDMA_DEVCAP_READ_W_INV;
-
/* Post receive buffers */
for (i = 0; i < newxprt->sc_max_requests; i++) {
ret = svc_rdma_post_recv(newxprt, GFP_KERNEL);
@@ -1056,7 +852,6 @@
sap = (struct sockaddr *)&newxprt->sc_cm_id->route.addr.dst_addr;
dprintk(" remote address : %pIS:%u\n", sap, rpc_get_port(sap));
dprintk(" max_sge : %d\n", newxprt->sc_max_sge);
- dprintk(" max_sge_rd : %d\n", newxprt->sc_max_sge_rd);
dprintk(" sq_depth : %d\n", newxprt->sc_sq_depth);
dprintk(" max_requests : %d\n", newxprt->sc_max_requests);
dprintk(" ord : %d\n", newxprt->sc_ord);
@@ -1117,12 +912,6 @@
pr_err("svcrdma: sc_xprt still in use? (%d)\n",
kref_read(&xprt->xpt_ref));
- /*
- * Destroy queued, but not processed read completions. Note
- * that this cleanup has to be done before destroying the
- * cm_id because the device ptr is needed to unmap the dma in
- * svc_rdma_put_context.
- */
while (!list_empty(&rdma->sc_read_complete_q)) {
struct svc_rdma_op_ctxt *ctxt;
ctxt = list_first_entry(&rdma->sc_read_complete_q,
@@ -1130,8 +919,6 @@
list_del(&ctxt->list);
svc_rdma_put_context(ctxt, 1);
}
-
- /* Destroy queued, but not processed recv completions */
while (!list_empty(&rdma->sc_rq_dto_q)) {
struct svc_rdma_op_ctxt *ctxt;
ctxt = list_first_entry(&rdma->sc_rq_dto_q,
@@ -1151,7 +938,6 @@
xprt->xpt_bc_xprt = NULL;
}
- rdma_dealloc_frmr_q(rdma);
svc_rdma_destroy_rw_ctxts(rdma);
svc_rdma_destroy_ctxts(rdma);
diff --git a/net/sunrpc/xprtrdma/transport.c b/net/sunrpc/xprtrdma/transport.c
index 62ecbcc..d1c458e 100644
--- a/net/sunrpc/xprtrdma/transport.c
+++ b/net/sunrpc/xprtrdma/transport.c
@@ -684,7 +684,8 @@
dprintk("RPC: %s: called on 0x%p\n", __func__, req->rl_reply);
- if (unlikely(!list_empty(&req->rl_registered)))
+ rpcrdma_remove_req(&r_xprt->rx_buf, req);
+ if (!list_empty(&req->rl_registered))
ia->ri_ops->ro_unmap_safe(r_xprt, req, !RPC_IS_ASYNC(task));
rpcrdma_unmap_sges(ia, req);
rpcrdma_buffer_put(req);
diff --git a/net/sunrpc/xprtrdma/verbs.c b/net/sunrpc/xprtrdma/verbs.c
index 3dbce9a..e4171f2 100644
--- a/net/sunrpc/xprtrdma/verbs.c
+++ b/net/sunrpc/xprtrdma/verbs.c
@@ -243,8 +243,6 @@
#if IS_ENABLED(CONFIG_SUNRPC_DEBUG)
struct sockaddr *sap = (struct sockaddr *)&ep->rep_remote_addr;
#endif
- struct ib_qp_attr *attr = &ia->ri_qp_attr;
- struct ib_qp_init_attr *iattr = &ia->ri_qp_init_attr;
int connstate = 0;
switch (event->event) {
@@ -267,7 +265,8 @@
break;
case RDMA_CM_EVENT_DEVICE_REMOVAL:
#if IS_ENABLED(CONFIG_SUNRPC_DEBUG)
- pr_info("rpcrdma: removing device for %pIS:%u\n",
+ pr_info("rpcrdma: removing device %s for %pIS:%u\n",
+ ia->ri_device->name,
sap, rpc_get_port(sap));
#endif
set_bit(RPCRDMA_IAF_REMOVING, &ia->ri_flags);
@@ -282,13 +281,6 @@
return 1;
case RDMA_CM_EVENT_ESTABLISHED:
connstate = 1;
- ib_query_qp(ia->ri_id->qp, attr,
- IB_QP_MAX_QP_RD_ATOMIC | IB_QP_MAX_DEST_RD_ATOMIC,
- iattr);
- dprintk("RPC: %s: %d responder resources"
- " (%d initiator)\n",
- __func__, attr->max_dest_rd_atomic,
- attr->max_rd_atomic);
rpcrdma_update_connect_private(xprt, &event->param.conn);
goto connected;
case RDMA_CM_EVENT_CONNECT_ERROR:
@@ -298,11 +290,9 @@
connstate = -ENETDOWN;
goto connected;
case RDMA_CM_EVENT_REJECTED:
-#if IS_ENABLED(CONFIG_SUNRPC_DEBUG)
- pr_info("rpcrdma: connection to %pIS:%u on %s rejected: %s\n",
- sap, rpc_get_port(sap), ia->ri_device->name,
+ dprintk("rpcrdma: connection to %pIS:%u rejected: %s\n",
+ sap, rpc_get_port(sap),
rdma_reject_msg(id, event->status));
-#endif
connstate = -ECONNREFUSED;
if (event->status == IB_CM_REJ_STALE_CONN)
connstate = -EAGAIN;
@@ -310,37 +300,19 @@
case RDMA_CM_EVENT_DISCONNECTED:
connstate = -ECONNABORTED;
connected:
- dprintk("RPC: %s: %sconnected\n",
- __func__, connstate > 0 ? "" : "dis");
atomic_set(&xprt->rx_buf.rb_credits, 1);
ep->rep_connected = connstate;
rpcrdma_conn_func(ep);
wake_up_all(&ep->rep_connect_wait);
/*FALLTHROUGH*/
default:
- dprintk("RPC: %s: %pIS:%u (ep 0x%p): %s\n",
- __func__, sap, rpc_get_port(sap), ep,
- rdma_event_msg(event->event));
+ dprintk("RPC: %s: %pIS:%u on %s/%s (ep 0x%p): %s\n",
+ __func__, sap, rpc_get_port(sap),
+ ia->ri_device->name, ia->ri_ops->ro_displayname,
+ ep, rdma_event_msg(event->event));
break;
}
-#if IS_ENABLED(CONFIG_SUNRPC_DEBUG)
- if (connstate == 1) {
- int ird = attr->max_dest_rd_atomic;
- int tird = ep->rep_remote_cma.responder_resources;
-
- pr_info("rpcrdma: connection to %pIS:%u on %s, memreg '%s', %d credits, %d responders%s\n",
- sap, rpc_get_port(sap),
- ia->ri_device->name,
- ia->ri_ops->ro_displayname,
- xprt->rx_buf.rb_max_requests,
- ird, ird < 4 && ird < tird / 2 ? " (low!)" : "");
- } else if (connstate < 0) {
- pr_info("rpcrdma: connection to %pIS:%u closed (%d)\n",
- sap, rpc_get_port(sap), connstate);
- }
-#endif
-
return 0;
}
@@ -971,7 +943,6 @@
if (req == NULL)
return ERR_PTR(-ENOMEM);
- INIT_LIST_HEAD(&req->rl_free);
spin_lock(&buffer->rb_reqslock);
list_add(&req->rl_all, &buffer->rb_allreqs);
spin_unlock(&buffer->rb_reqslock);
@@ -1033,6 +1004,7 @@
spin_lock_init(&buf->rb_recovery_lock);
INIT_LIST_HEAD(&buf->rb_mws);
INIT_LIST_HEAD(&buf->rb_all);
+ INIT_LIST_HEAD(&buf->rb_pending);
INIT_LIST_HEAD(&buf->rb_stale_mrs);
INIT_DELAYED_WORK(&buf->rb_refresh_worker,
rpcrdma_mr_refresh_worker);
@@ -1055,7 +1027,7 @@
goto out;
}
req->rl_backchannel = false;
- list_add(&req->rl_free, &buf->rb_send_bufs);
+ list_add(&req->rl_list, &buf->rb_send_bufs);
}
INIT_LIST_HEAD(&buf->rb_recv_bufs);
@@ -1084,8 +1056,8 @@
struct rpcrdma_req *req;
req = list_first_entry(&buf->rb_send_bufs,
- struct rpcrdma_req, rl_free);
- list_del(&req->rl_free);
+ struct rpcrdma_req, rl_list);
+ list_del_init(&req->rl_list);
return req;
}
@@ -1187,6 +1159,7 @@
if (!mw)
goto out_nomws;
+ mw->mw_flags = 0;
return mw;
out_nomws:
@@ -1267,7 +1240,7 @@
spin_lock(&buffers->rb_lock);
buffers->rb_send_count--;
- list_add_tail(&req->rl_free, &buffers->rb_send_bufs);
+ list_add_tail(&req->rl_list, &buffers->rb_send_bufs);
if (rep) {
buffers->rb_recv_count--;
list_add_tail(&rep->rr_list, &buffers->rb_recv_bufs);
diff --git a/net/sunrpc/xprtrdma/xprt_rdma.h b/net/sunrpc/xprtrdma/xprt_rdma.h
index 1d66acf..b282d3f 100644
--- a/net/sunrpc/xprtrdma/xprt_rdma.h
+++ b/net/sunrpc/xprtrdma/xprt_rdma.h
@@ -271,6 +271,7 @@
struct scatterlist *mw_sg;
int mw_nents;
enum dma_data_direction mw_dir;
+ unsigned long mw_flags;
union {
struct rpcrdma_fmr fmr;
struct rpcrdma_frmr frmr;
@@ -282,6 +283,11 @@
struct list_head mw_all;
};
+/* mw_flags */
+enum {
+ RPCRDMA_MW_F_RI = 1,
+};
+
/*
* struct rpcrdma_req -- structure central to the request/reply sequence.
*
@@ -334,7 +340,8 @@
struct rpcrdma_buffer;
struct rpcrdma_req {
- struct list_head rl_free;
+ struct list_head rl_list;
+ __be32 rl_xid;
unsigned int rl_mapped_sges;
unsigned int rl_connect_cookie;
struct rpcrdma_buffer *rl_buffer;
@@ -396,6 +403,7 @@
int rb_send_count, rb_recv_count;
struct list_head rb_send_bufs;
struct list_head rb_recv_bufs;
+ struct list_head rb_pending;
u32 rb_max_requests;
atomic_t rb_credits; /* most recent credit grant */
@@ -461,7 +469,7 @@
struct rpcrdma_mr_seg *, int, bool,
struct rpcrdma_mw **);
void (*ro_unmap_sync)(struct rpcrdma_xprt *,
- struct rpcrdma_req *);
+ struct list_head *);
void (*ro_unmap_safe)(struct rpcrdma_xprt *,
struct rpcrdma_req *, bool);
void (*ro_recover_mr)(struct rpcrdma_mw *);
@@ -544,6 +552,34 @@
int rpcrdma_buffer_create(struct rpcrdma_xprt *);
void rpcrdma_buffer_destroy(struct rpcrdma_buffer *);
+static inline void
+rpcrdma_insert_req(struct rpcrdma_buffer *buffers, struct rpcrdma_req *req)
+{
+ spin_lock(&buffers->rb_lock);
+ if (list_empty(&req->rl_list))
+ list_add_tail(&req->rl_list, &buffers->rb_pending);
+ spin_unlock(&buffers->rb_lock);
+}
+
+static inline struct rpcrdma_req *
+rpcrdma_lookup_req_locked(struct rpcrdma_buffer *buffers, __be32 xid)
+{
+ struct rpcrdma_req *pos;
+
+ list_for_each_entry(pos, &buffers->rb_pending, rl_list)
+ if (pos->rl_xid == xid)
+ return pos;
+ return NULL;
+}
+
+static inline void
+rpcrdma_remove_req(struct rpcrdma_buffer *buffers, struct rpcrdma_req *req)
+{
+ spin_lock(&buffers->rb_lock);
+ list_del(&req->rl_list);
+ spin_unlock(&buffers->rb_lock);
+}
+
struct rpcrdma_mw *rpcrdma_get_mw(struct rpcrdma_xprt *);
void rpcrdma_put_mw(struct rpcrdma_xprt *, struct rpcrdma_mw *);
struct rpcrdma_req *rpcrdma_buffer_get(struct rpcrdma_buffer *);
diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
index d5b54c0..4f154d3 100644
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -1624,6 +1624,8 @@
if (test_and_clear_bit(XPRT_SOCK_CONNECTING,
&transport->sock_state))
xprt_clear_connecting(xprt);
+ if (sk->sk_err)
+ xprt_wake_pending_tasks(xprt, -sk->sk_err);
xs_sock_mark_closed(xprt);
}
out:
diff --git a/samples/bpf/Makefile b/samples/bpf/Makefile
index 9c65058..87246be 100644
--- a/samples/bpf/Makefile
+++ b/samples/bpf/Makefile
@@ -207,6 +207,7 @@
# useless for BPF samples.
$(obj)/%.o: $(src)/%.c
$(CLANG) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(EXTRA_CFLAGS) -I$(obj) \
+ -I$(srctree)/tools/testing/selftests/bpf/ \
-D__KERNEL__ -D__ASM_SYSREG_H -Wno-unused-value -Wno-pointer-sign \
-Wno-compare-distinct-pointer-types \
-Wno-gnu-variable-sized-type-not-at-end \
diff --git a/samples/bpf/tcbpf2_kern.c b/samples/bpf/tcbpf2_kern.c
index 9c823a6..270edcc 100644
--- a/samples/bpf/tcbpf2_kern.c
+++ b/samples/bpf/tcbpf2_kern.c
@@ -147,9 +147,9 @@
__builtin_memset(&gopt, 0x0, sizeof(gopt));
gopt.opt_class = 0x102; /* Open Virtual Networking (OVN) */
gopt.type = 0x08;
- gopt.r1 = 1;
+ gopt.r1 = 0;
gopt.r2 = 0;
- gopt.r3 = 1;
+ gopt.r3 = 0;
gopt.length = 2; /* 4-byte multiple */
*(int *) &gopt.opt_data = 0xdeadbeef;
diff --git a/samples/bpf/test_tunnel_bpf.sh b/samples/bpf/test_tunnel_bpf.sh
index 1ff634f..a70d2ea 100755
--- a/samples/bpf/test_tunnel_bpf.sh
+++ b/samples/bpf/test_tunnel_bpf.sh
@@ -149,6 +149,7 @@
ip link del veth1
ip link del ipip11
ip link del gretap11
+ ip link del vxlan11
ip link del geneve11
pkill tcpdump
pkill cat
diff --git a/samples/kfifo/dma-example.c b/samples/kfifo/dma-example.c
index aa243db..be0d4a5 100644
--- a/samples/kfifo/dma-example.c
+++ b/samples/kfifo/dma-example.c
@@ -75,8 +75,8 @@
for (i = 0; i < nents; i++) {
printk(KERN_INFO
"sg[%d] -> "
- "page_link 0x%.8lx offset 0x%.8x length 0x%.8x\n",
- i, sg[i].page_link, sg[i].offset, sg[i].length);
+ "page %p offset 0x%.8x length 0x%.8x\n",
+ i, sg_page(&sg[i]), sg[i].offset, sg[i].length);
if (sg_is_last(&sg[i]))
break;
@@ -104,8 +104,8 @@
for (i = 0; i < nents; i++) {
printk(KERN_INFO
"sg[%d] -> "
- "page_link 0x%.8lx offset 0x%.8x length 0x%.8x\n",
- i, sg[i].page_link, sg[i].offset, sg[i].length);
+ "page %p offset 0x%.8x length 0x%.8x\n",
+ i, sg_page(&sg[i]), sg[i].offset, sg[i].length);
if (sg_is_last(&sg[i]))
break;
diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst
index c583a1e..343d586 100644
--- a/scripts/Makefile.headersinst
+++ b/scripts/Makefile.headersinst
@@ -23,15 +23,12 @@
$(filter-out $(srcdir)/,\
$(sort $(dir $(wildcard $(srcdir)/*/)))))
-# caller may set destination dir (when installing to asm/)
-_dst := $(if $(dst),$(dst),$(obj))
-
# Recursion
__headers: $(subdirs)
.PHONY: $(subdirs)
$(subdirs):
- $(Q)$(MAKE) $(hdr-inst)=$(obj)/$@ dst=$(_dst)/$@
+ $(Q)$(MAKE) $(hdr-inst)=$(obj)/$@ dst=$(dst)/$@
# Skip header install/check for include/uapi and arch/$(hdr-arch)/include/uapi.
# We have only sub-directories there.
@@ -39,21 +36,12 @@
ifeq ($(skip-inst),)
-# generated header directory
-gen := $(if $(gen),$(gen),$(subst include/,include/generated/,$(obj)))
-
# Kbuild file is optional
kbuild-file := $(srctree)/$(obj)/Kbuild
-include $(kbuild-file)
-old-kbuild-file := $(srctree)/$(subst uapi/,,$(obj))/Kbuild
-ifneq ($(wildcard $(old-kbuild-file)),)
-include $(old-kbuild-file)
-endif
-
-installdir := $(INSTALL_HDR_PATH)/$(subst uapi/,,$(_dst))
-
-gendir := $(objtree)/$(gen)
+installdir := $(INSTALL_HDR_PATH)/$(dst)
+gendir := $(objtree)/$(subst include/,include/generated/,$(obj))
header-files := $(notdir $(wildcard $(srcdir)/*.h))
header-files += $(notdir $(wildcard $(srcdir)/*.agh))
header-files := $(filter-out $(no-export-headers), $(header-files))
@@ -64,14 +52,8 @@
install-file := $(installdir)/.install
check-file := $(installdir)/.check
-# generic-y list all files an architecture uses from asm-generic
-# Use this to build a list of headers which require a wrapper
-generic-files := $(notdir $(wildcard $(srctree)/include/uapi/asm-generic/*.h))
-wrapper-files := $(filter $(generic-files), $(generic-y))
-wrapper-files := $(filter-out $(header-files), $(wrapper-files))
-
# all headers files for this dir
-all-files := $(header-files) $(genhdr-files) $(wrapper-files)
+all-files := $(header-files) $(genhdr-files)
output-files := $(addprefix $(installdir)/, $(all-files))
ifneq ($(mandatory-y),)
@@ -95,9 +77,6 @@
cmd_install = \
$(CONFIG_SHELL) $< $(installdir) $(srcdir) $(header-files); \
$(CONFIG_SHELL) $< $(installdir) $(gendir) $(genhdr-files); \
- for F in $(wrapper-files); do \
- echo "\#include <asm-generic/$$F>" > $(installdir)/$$F; \
- done; \
touch $@
quiet_cmd_remove = REMOVE $(unwanted)
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 8f940c0..2287a0b 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -5576,10 +5576,18 @@
"architecture specific defines should be avoided\n" . $herecurr);
}
-# Check that the storage class is at the beginning of a declaration
- if ($line =~ /\b$Storage\b/ && $line !~ /^.\s*$Storage\b/) {
+# check that the storage class is not after a type
+ if ($line =~ /\b($Type)\s+($Storage)\b/) {
WARN("STORAGE_CLASS",
- "storage class should be at the beginning of the declaration\n" . $herecurr)
+ "storage class '$2' should be located before type '$1'\n" . $herecurr);
+ }
+# Check that the storage class is at the beginning of a declaration
+ if ($line =~ /\b$Storage\b/ &&
+ $line !~ /^.\s*$Storage/ &&
+ $line =~ /^.\s*(.+?)\$Storage\s/ &&
+ $1 !~ /[\,\)]\s*$/) {
+ WARN("STORAGE_CLASS",
+ "storage class should be at the beginning of the declaration\n" . $herecurr);
}
# check the location of the inline attribute, that it is between
diff --git a/scripts/dtc/dtx_diff b/scripts/dtc/dtx_diff
index fb86f38..f9a3d8d 100755
--- a/scripts/dtc/dtx_diff
+++ b/scripts/dtc/dtx_diff
@@ -321,7 +321,7 @@
cpp_flags="\
-nostdinc \
-I${srctree}/arch/${ARCH}/boot/dts \
- -I${srctree}/arch/${ARCH}/boot/dts/include \
+ -I${srctree}/scripts/dtc/include-prefixes \
-I${srctree}/drivers/of/testcase-data \
-undef -D__DTS__"
diff --git a/scripts/gdb/linux/constants.py.in b/scripts/gdb/linux/constants.py.in
index 7986f4e..7aad824 100644
--- a/scripts/gdb/linux/constants.py.in
+++ b/scripts/gdb/linux/constants.py.in
@@ -14,6 +14,7 @@
#include <linux/fs.h>
#include <linux/mount.h>
+#include <linux/of_fdt.h>
/* We need to stringify expanded macros so that they can be parsed */
@@ -50,3 +51,9 @@
LX_VALUE(MNT_NOATIME)
LX_VALUE(MNT_NODIRATIME)
LX_VALUE(MNT_RELATIME)
+
+/* linux/of_fdt.h> */
+LX_VALUE(OF_DT_HEADER)
+
+/* Kernel Configs */
+LX_CONFIG(CONFIG_OF)
diff --git a/scripts/gdb/linux/dmesg.py b/scripts/gdb/linux/dmesg.py
index 5afd109..6d2e09a 100644
--- a/scripts/gdb/linux/dmesg.py
+++ b/scripts/gdb/linux/dmesg.py
@@ -12,6 +12,7 @@
#
import gdb
+import sys
from linux import utils
@@ -24,7 +25,7 @@
def invoke(self, arg, from_tty):
log_buf_addr = int(str(gdb.parse_and_eval(
- "'printk.c'::log_buf")).split()[0], 16)
+ "(void *)'printk.c'::log_buf")).split()[0], 16)
log_first_idx = int(gdb.parse_and_eval("'printk.c'::log_first_idx"))
log_next_idx = int(gdb.parse_and_eval("'printk.c'::log_next_idx"))
log_buf_len = int(gdb.parse_and_eval("'printk.c'::log_buf_len"))
@@ -52,13 +53,19 @@
continue
text_len = utils.read_u16(log_buf[pos + 10:pos + 12])
- text = log_buf[pos + 16:pos + 16 + text_len].decode()
+ text = log_buf[pos + 16:pos + 16 + text_len].decode(
+ encoding='utf8', errors='replace')
time_stamp = utils.read_u64(log_buf[pos:pos + 8])
for line in text.splitlines():
- gdb.write("[{time:12.6f}] {line}\n".format(
+ msg = u"[{time:12.6f}] {line}\n".format(
time=time_stamp / 1000000000.0,
- line=line))
+ line=line)
+ # With python2 gdb.write will attempt to convert unicode to
+ # ascii and might fail so pass an utf8-encoded str instead.
+ if sys.hexversion < 0x03000000:
+ msg = msg.encode(encoding='utf8', errors='replace')
+ gdb.write(msg)
pos += length
diff --git a/scripts/gdb/linux/proc.py b/scripts/gdb/linux/proc.py
index 38b1f09..086d272 100644
--- a/scripts/gdb/linux/proc.py
+++ b/scripts/gdb/linux/proc.py
@@ -16,6 +16,7 @@
from linux import utils
from linux import tasks
from linux import lists
+from struct import *
class LxCmdLine(gdb.Command):
@@ -195,3 +196,75 @@
info_opts(MNT_INFO, m_flags)))
LxMounts()
+
+
+class LxFdtDump(gdb.Command):
+ """Output Flattened Device Tree header and dump FDT blob to the filename
+ specified as the command argument. Equivalent to
+ 'cat /proc/fdt > fdtdump.dtb' on a running target"""
+
+ def __init__(self):
+ super(LxFdtDump, self).__init__("lx-fdtdump", gdb.COMMAND_DATA,
+ gdb.COMPLETE_FILENAME)
+
+ def fdthdr_to_cpu(self, fdt_header):
+
+ fdt_header_be = ">IIIIIII"
+ fdt_header_le = "<IIIIIII"
+
+ if utils.get_target_endianness() == 1:
+ output_fmt = fdt_header_le
+ else:
+ output_fmt = fdt_header_be
+
+ return unpack(output_fmt, pack(fdt_header_be,
+ fdt_header['magic'],
+ fdt_header['totalsize'],
+ fdt_header['off_dt_struct'],
+ fdt_header['off_dt_strings'],
+ fdt_header['off_mem_rsvmap'],
+ fdt_header['version'],
+ fdt_header['last_comp_version']))
+
+ def invoke(self, arg, from_tty):
+
+ if not constants.LX_CONFIG_OF:
+ raise gdb.GdbError("Kernel not compiled with CONFIG_OF\n")
+
+ if len(arg) == 0:
+ filename = "fdtdump.dtb"
+ else:
+ filename = arg
+
+ py_fdt_header_ptr = gdb.parse_and_eval(
+ "(const struct fdt_header *) initial_boot_params")
+ py_fdt_header = py_fdt_header_ptr.dereference()
+
+ fdt_header = self.fdthdr_to_cpu(py_fdt_header)
+
+ if fdt_header[0] != constants.LX_OF_DT_HEADER:
+ raise gdb.GdbError("No flattened device tree magic found\n")
+
+ gdb.write("fdt_magic: 0x{:02X}\n".format(fdt_header[0]))
+ gdb.write("fdt_totalsize: 0x{:02X}\n".format(fdt_header[1]))
+ gdb.write("off_dt_struct: 0x{:02X}\n".format(fdt_header[2]))
+ gdb.write("off_dt_strings: 0x{:02X}\n".format(fdt_header[3]))
+ gdb.write("off_mem_rsvmap: 0x{:02X}\n".format(fdt_header[4]))
+ gdb.write("version: {}\n".format(fdt_header[5]))
+ gdb.write("last_comp_version: {}\n".format(fdt_header[6]))
+
+ inf = gdb.inferiors()[0]
+ fdt_buf = utils.read_memoryview(inf, py_fdt_header_ptr,
+ fdt_header[1]).tobytes()
+
+ try:
+ f = open(filename, 'wb')
+ except:
+ raise gdb.GdbError("Could not open file to dump fdt")
+
+ f.write(fdt_buf)
+ f.close()
+
+ gdb.write("Dumped fdt blob to " + filename + "\n")
+
+LxFdtDump()
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 30d752a..48397fe 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -2126,6 +2126,7 @@
buf_printf(b, "#include <linux/compiler.h>\n");
buf_printf(b, "\n");
buf_printf(b, "MODULE_INFO(vermagic, VERMAGIC_STRING);\n");
+ buf_printf(b, "MODULE_INFO(name, KBUILD_MODNAME);\n");
buf_printf(b, "\n");
buf_printf(b, "__visible struct module __this_module\n");
buf_printf(b, "__attribute__((section(\".gnu.linkonce.this_module\"))) = {\n");
diff --git a/scripts/parse-maintainers.pl b/scripts/parse-maintainers.pl
new file mode 100644
index 0000000..a0fe343
--- /dev/null
+++ b/scripts/parse-maintainers.pl
@@ -0,0 +1,77 @@
+#!/usr/bin/perl -w
+
+use strict;
+
+my %map;
+
+# sort comparison function
+sub by_category($$) {
+ my ($a, $b) = @_;
+
+ $a = uc $a;
+ $b = uc $b;
+
+ # This always sorts last
+ $a =~ s/THE REST/ZZZZZZ/g;
+ $b =~ s/THE REST/ZZZZZZ/g;
+
+ $a cmp $b;
+}
+
+sub alpha_output {
+ my $key;
+ my $sort_method = \&by_category;
+ my $sep = "";
+
+ foreach $key (sort $sort_method keys %map) {
+ if ($key ne " ") {
+ print $sep . $key . "\n";
+ $sep = "\n";
+ }
+ print $map{$key};
+ }
+}
+
+sub trim {
+ my $s = shift;
+ $s =~ s/\s+$//;
+ $s =~ s/^\s+//;
+ return $s;
+}
+
+sub file_input {
+ my $lastline = "";
+ my $case = " ";
+ $map{$case} = "";
+
+ while (<>) {
+ my $line = $_;
+
+ # Pattern line?
+ if ($line =~ m/^([A-Z]):\s*(.*)/) {
+ $line = $1 . ":\t" . trim($2) . "\n";
+ if ($lastline eq "") {
+ $map{$case} = $map{$case} . $line;
+ next;
+ }
+ $case = trim($lastline);
+ exists $map{$case} and die "Header '$case' already exists";
+ $map{$case} = $line;
+ $lastline = "";
+ next;
+ }
+
+ if ($case eq " ") {
+ $map{$case} = $map{$case} . $lastline;
+ $lastline = $line;
+ next;
+ }
+ trim($lastline) eq "" or die ("Odd non-pattern line '$lastline' for '$case'");
+ $lastline = $line;
+ }
+ $map{$case} = $map{$case} . $lastline;
+}
+
+&file_input;
+&alpha_output;
+exit(0);
diff --git a/security/Kconfig b/security/Kconfig
index d540bfe..e8e4494 100644
--- a/security/Kconfig
+++ b/security/Kconfig
@@ -163,6 +163,13 @@
been removed. This config is intended to be used only while
trying to find such users.
+config FORTIFY_SOURCE
+ bool "Harden common str/mem functions against buffer overflows"
+ depends on ARCH_HAS_FORTIFY_SOURCE
+ help
+ Detect overflows of buffers in common string and memory functions
+ where the compiler can determine and validate the buffer sizes.
+
config STATIC_USERMODEHELPER
bool "Force all usermode helper calls through a single binary"
help
diff --git a/security/keys/compat_dh.c b/security/keys/compat_dh.c
index a6a659b..aa6b34c 100644
--- a/security/keys/compat_dh.c
+++ b/security/keys/compat_dh.c
@@ -33,6 +33,8 @@
kdfcopy.hashname = compat_ptr(compat_kdfcopy.hashname);
kdfcopy.otherinfo = compat_ptr(compat_kdfcopy.otherinfo);
kdfcopy.otherinfolen = compat_kdfcopy.otherinfolen;
+ memcpy(kdfcopy.__spare, compat_kdfcopy.__spare,
+ sizeof(kdfcopy.__spare));
return __keyctl_dh_compute(params, buffer, buflen, &kdfcopy);
}
diff --git a/security/keys/dh.c b/security/keys/dh.c
index 4755d4b..d1ea9f3 100644
--- a/security/keys/dh.c
+++ b/security/keys/dh.c
@@ -266,6 +266,11 @@
if (kdfcopy) {
char *hashname;
+ if (memchr_inv(kdfcopy->__spare, 0, sizeof(kdfcopy->__spare))) {
+ ret = -EINVAL;
+ goto out1;
+ }
+
if (buflen > KEYCTL_KDF_MAX_OUTPUT_LEN ||
kdfcopy->otherinfolen > KEYCTL_KDF_MAX_OI_LEN) {
ret = -EMSGSIZE;
diff --git a/security/keys/internal.h b/security/keys/internal.h
index 91bc621..1c02c65 100644
--- a/security/keys/internal.h
+++ b/security/keys/internal.h
@@ -198,7 +198,7 @@
void *callout_info;
size_t callout_len;
pid_t pid;
-};
+} __randomize_layout;
extern struct key_type key_type_request_key_auth;
extern struct key *request_key_auth_new(struct key *target,
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index b3d5bed..22995cb 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -238,10 +238,8 @@
{
if (!(substream->runtime->hw.info & SNDRV_PCM_INFO_MMAP))
return false;
- /* check architectures that return -EINVAL from dma_mmap_coherent() */
- /* FIXME: this should be some global flag */
-#if defined(CONFIG_C6X) || defined(CONFIG_FRV) || defined(CONFIG_MN10300) ||\
- defined(CONFIG_PARISC) || defined(CONFIG_XTENSA)
+ /* architecture supports dma_mmap_coherent()? */
+#if defined(CONFIG_ARCH_NO_COHERENT_DMA_MMAP) || !defined(CONFIG_HAS_DMA)
if (!substream->ops->mmap &&
substream->dma_buffer.dev.type == SNDRV_DMA_TYPE_DEV)
return false;
@@ -3502,7 +3500,7 @@
}
#endif /* CONFIG_GENERIC_ALLOCATOR */
#ifndef CONFIG_X86 /* for avoiding warnings arch/x86/mm/pat.c */
- if (!substream->ops->page &&
+ if (IS_ENABLED(CONFIG_HAS_DMA) && !substream->ops->page &&
substream->dma_buffer.dev.type == SNDRV_DMA_TYPE_DEV)
return dma_mmap_coherent(substream->dma_buffer.dev.dev,
area,
diff --git a/sound/drivers/opl4/opl4_lib.c b/sound/drivers/opl4/opl4_lib.c
index bc345d5..db76a5b 100644
--- a/sound/drivers/opl4/opl4_lib.c
+++ b/sound/drivers/opl4/opl4_lib.c
@@ -29,7 +29,7 @@
MODULE_DESCRIPTION("OPL4 driver");
MODULE_LICENSE("GPL");
-static void inline snd_opl4_wait(struct snd_opl4 *opl4)
+static inline void snd_opl4_wait(struct snd_opl4 *opl4)
{
int timeout = 10;
while ((inb(opl4->fm_port) & OPL4_STATUS_BUSY) && --timeout > 0)
diff --git a/sound/isa/msnd/msnd_midi.c b/sound/isa/msnd/msnd_midi.c
index 912b5a9..013d8d1 100644
--- a/sound/isa/msnd/msnd_midi.c
+++ b/sound/isa/msnd/msnd_midi.c
@@ -120,24 +120,24 @@
unsigned long flags;
struct snd_msndmidi *mpu = mpuv;
void *pwMIDQData = mpu->dev->mappedbase + MIDQ_DATA_BUFF;
+ u16 head, tail, size;
spin_lock_irqsave(&mpu->input_lock, flags);
- while (readw(mpu->dev->MIDQ + JQS_wTail) !=
- readw(mpu->dev->MIDQ + JQS_wHead)) {
- u16 wTmp, val;
- val = readw(pwMIDQData + 2 * readw(mpu->dev->MIDQ + JQS_wHead));
+ head = readw(mpu->dev->MIDQ + JQS_wHead);
+ tail = readw(mpu->dev->MIDQ + JQS_wTail);
+ size = readw(mpu->dev->MIDQ + JQS_wSize);
+ if (head > size || tail > size)
+ goto out;
+ while (head != tail) {
+ unsigned char val = readw(pwMIDQData + 2 * head);
- if (test_bit(MSNDMIDI_MODE_BIT_INPUT_TRIGGER,
- &mpu->mode))
- snd_rawmidi_receive(mpu->substream_input,
- (unsigned char *)&val, 1);
-
- wTmp = readw(mpu->dev->MIDQ + JQS_wHead) + 1;
- if (wTmp > readw(mpu->dev->MIDQ + JQS_wSize))
- writew(0, mpu->dev->MIDQ + JQS_wHead);
- else
- writew(wTmp, mpu->dev->MIDQ + JQS_wHead);
+ if (test_bit(MSNDMIDI_MODE_BIT_INPUT_TRIGGER, &mpu->mode))
+ snd_rawmidi_receive(mpu->substream_input, &val, 1);
+ if (++head > size)
+ head = 0;
+ writew(head, mpu->dev->MIDQ + JQS_wHead);
}
+ out:
spin_unlock_irqrestore(&mpu->input_lock, flags);
}
EXPORT_SYMBOL(snd_msndmidi_input_read);
diff --git a/sound/isa/msnd/msnd_pinnacle.c b/sound/isa/msnd/msnd_pinnacle.c
index ad48973..fc4fb19 100644
--- a/sound/isa/msnd/msnd_pinnacle.c
+++ b/sound/isa/msnd/msnd_pinnacle.c
@@ -170,23 +170,24 @@
{
struct snd_msnd *chip = dev_id;
void *pwDSPQData = chip->mappedbase + DSPQ_DATA_BUFF;
+ u16 head, tail, size;
/* Send ack to DSP */
/* inb(chip->io + HP_RXL); */
/* Evaluate queued DSP messages */
- while (readw(chip->DSPQ + JQS_wTail) != readw(chip->DSPQ + JQS_wHead)) {
- u16 wTmp;
-
- snd_msnd_eval_dsp_msg(chip,
- readw(pwDSPQData + 2 * readw(chip->DSPQ + JQS_wHead)));
-
- wTmp = readw(chip->DSPQ + JQS_wHead) + 1;
- if (wTmp > readw(chip->DSPQ + JQS_wSize))
- writew(0, chip->DSPQ + JQS_wHead);
- else
- writew(wTmp, chip->DSPQ + JQS_wHead);
+ head = readw(chip->DSPQ + JQS_wHead);
+ tail = readw(chip->DSPQ + JQS_wTail);
+ size = readw(chip->DSPQ + JQS_wSize);
+ if (head > size || tail > size)
+ goto out;
+ while (head != tail) {
+ snd_msnd_eval_dsp_msg(chip, readw(pwDSPQData + 2 * head));
+ if (++head > size)
+ head = 0;
+ writew(head, chip->DSPQ + JQS_wHead);
}
+ out:
/* Send ack to DSP */
inb(chip->io + HP_RXL);
return IRQ_HANDLED;
diff --git a/sound/pci/fm801.c b/sound/pci/fm801.c
index 2e402ec..8e6b04b 100644
--- a/sound/pci/fm801.c
+++ b/sound/pci/fm801.c
@@ -1235,8 +1235,6 @@
}
}
- snd_fm801_chip_init(chip);
-
if ((chip->tea575x_tuner & TUNER_ONLY) == 0) {
if (devm_request_irq(&pci->dev, pci->irq, snd_fm801_interrupt,
IRQF_SHARED, KBUILD_MODNAME, chip)) {
@@ -1248,6 +1246,8 @@
pci_set_master(pci);
}
+ snd_fm801_chip_init(chip);
+
if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops)) < 0) {
snd_fm801_free(chip);
return err;
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index 63bc894..8c12899 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -933,6 +933,7 @@
SND_PCI_QUIRK(0x103c, 0x8174, "HP Spectre x360", CXT_FIXUP_HP_SPECTRE),
SND_PCI_QUIRK(0x103c, 0x8115, "HP Z1 Gen3", CXT_FIXUP_HP_GATE_MIC),
SND_PCI_QUIRK(0x103c, 0x814f, "HP ZBook 15u G3", CXT_FIXUP_MUTE_LED_GPIO),
+ SND_PCI_QUIRK(0x103c, 0x822e, "HP ProBook 440 G4", CXT_FIXUP_MUTE_LED_GPIO),
SND_PCI_QUIRK(0x1043, 0x138d, "Asus", CXT_FIXUP_HEADPHONE_MIC_PIN),
SND_PCI_QUIRK(0x152d, 0x0833, "OLPC XO-1.5", CXT_FIXUP_OLPC_XO),
SND_PCI_QUIRK(0x17aa, 0x20f2, "Lenovo T400", CXT_PINCFG_LENOVO_TP410),
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 76c85f0..53f9311 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -53,9 +53,11 @@
#define is_skylake(codec) ((codec)->core.vendor_id == 0x80862809)
#define is_broxton(codec) ((codec)->core.vendor_id == 0x8086280a)
#define is_kabylake(codec) ((codec)->core.vendor_id == 0x8086280b)
+#define is_geminilake(codec) (((codec)->core.vendor_id == 0x8086280d) || \
+ ((codec)->core.vendor_id == 0x80862800))
#define is_haswell_plus(codec) (is_haswell(codec) || is_broadwell(codec) \
|| is_skylake(codec) || is_broxton(codec) \
- || is_kabylake(codec))
+ || is_kabylake(codec)) || is_geminilake(codec)
#define is_valleyview(codec) ((codec)->core.vendor_id == 0x80862882)
#define is_cherryview(codec) ((codec)->core.vendor_id == 0x80862883)
@@ -3731,11 +3733,15 @@
HDA_CODEC_ENTRY(0x10951390, "SiI1390 HDMI", patch_generic_hdmi),
HDA_CODEC_ENTRY(0x10951392, "SiI1392 HDMI", patch_generic_hdmi),
HDA_CODEC_ENTRY(0x17e80047, "Chrontel HDMI", patch_generic_hdmi),
+HDA_CODEC_ENTRY(0x10de0001, "MCP73 HDMI", patch_nvhdmi_2ch),
HDA_CODEC_ENTRY(0x10de0002, "MCP77/78 HDMI", patch_nvhdmi_8ch_7x),
HDA_CODEC_ENTRY(0x10de0003, "MCP77/78 HDMI", patch_nvhdmi_8ch_7x),
+HDA_CODEC_ENTRY(0x10de0004, "GPU 04 HDMI", patch_nvhdmi_8ch_7x),
HDA_CODEC_ENTRY(0x10de0005, "MCP77/78 HDMI", patch_nvhdmi_8ch_7x),
HDA_CODEC_ENTRY(0x10de0006, "MCP77/78 HDMI", patch_nvhdmi_8ch_7x),
HDA_CODEC_ENTRY(0x10de0007, "MCP79/7A HDMI", patch_nvhdmi_8ch_7x),
+HDA_CODEC_ENTRY(0x10de0008, "GPU 08 HDMI/DP", patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de0009, "GPU 09 HDMI/DP", patch_nvhdmi),
HDA_CODEC_ENTRY(0x10de000a, "GPU 0a HDMI/DP", patch_nvhdmi),
HDA_CODEC_ENTRY(0x10de000b, "GPU 0b HDMI/DP", patch_nvhdmi),
HDA_CODEC_ENTRY(0x10de000c, "MCP89 HDMI", patch_nvhdmi),
@@ -3762,17 +3768,40 @@
HDA_CODEC_ENTRY(0x10de0042, "GPU 42 HDMI/DP", patch_nvhdmi),
HDA_CODEC_ENTRY(0x10de0043, "GPU 43 HDMI/DP", patch_nvhdmi),
HDA_CODEC_ENTRY(0x10de0044, "GPU 44 HDMI/DP", patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de0045, "GPU 45 HDMI/DP", patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de0050, "GPU 50 HDMI/DP", patch_nvhdmi),
HDA_CODEC_ENTRY(0x10de0051, "GPU 51 HDMI/DP", patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de0052, "GPU 52 HDMI/DP", patch_nvhdmi),
HDA_CODEC_ENTRY(0x10de0060, "GPU 60 HDMI/DP", patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de0061, "GPU 61 HDMI/DP", patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de0062, "GPU 62 HDMI/DP", patch_nvhdmi),
HDA_CODEC_ENTRY(0x10de0067, "MCP67 HDMI", patch_nvhdmi_2ch),
HDA_CODEC_ENTRY(0x10de0070, "GPU 70 HDMI/DP", patch_nvhdmi),
HDA_CODEC_ENTRY(0x10de0071, "GPU 71 HDMI/DP", patch_nvhdmi),
HDA_CODEC_ENTRY(0x10de0072, "GPU 72 HDMI/DP", patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de0073, "GPU 73 HDMI/DP", patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de0074, "GPU 74 HDMI/DP", patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de0076, "GPU 76 HDMI/DP", patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de007b, "GPU 7b HDMI/DP", patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de007c, "GPU 7c HDMI/DP", patch_nvhdmi),
HDA_CODEC_ENTRY(0x10de007d, "GPU 7d HDMI/DP", patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de007e, "GPU 7e HDMI/DP", patch_nvhdmi),
HDA_CODEC_ENTRY(0x10de0080, "GPU 80 HDMI/DP", patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de0081, "GPU 81 HDMI/DP", patch_nvhdmi),
HDA_CODEC_ENTRY(0x10de0082, "GPU 82 HDMI/DP", patch_nvhdmi),
HDA_CODEC_ENTRY(0x10de0083, "GPU 83 HDMI/DP", patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de0084, "GPU 84 HDMI/DP", patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de0090, "GPU 90 HDMI/DP", patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de0091, "GPU 91 HDMI/DP", patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de0092, "GPU 92 HDMI/DP", patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de0093, "GPU 93 HDMI/DP", patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de0094, "GPU 94 HDMI/DP", patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de0095, "GPU 95 HDMI/DP", patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de0097, "GPU 97 HDMI/DP", patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de0098, "GPU 98 HDMI/DP", patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de0099, "GPU 99 HDMI/DP", patch_nvhdmi),
HDA_CODEC_ENTRY(0x10de8001, "MCP73 HDMI", patch_nvhdmi_2ch),
+HDA_CODEC_ENTRY(0x10de8067, "MCP67/68 HDMI", patch_nvhdmi_2ch),
HDA_CODEC_ENTRY(0x11069f80, "VX900 HDMI/DP", patch_via_hdmi),
HDA_CODEC_ENTRY(0x11069f81, "VX900 HDMI/DP", patch_via_hdmi),
HDA_CODEC_ENTRY(0x11069f84, "VX11 HDMI/DP", patch_generic_hdmi),
@@ -3790,6 +3819,7 @@
HDA_CODEC_ENTRY(0x8086280a, "Broxton HDMI", patch_i915_hsw_hdmi),
HDA_CODEC_ENTRY(0x8086280b, "Kabylake HDMI", patch_i915_hsw_hdmi),
HDA_CODEC_ENTRY(0x8086280d, "Geminilake HDMI", patch_i915_glk_hdmi),
+HDA_CODEC_ENTRY(0x80862800, "Geminilake HDMI", patch_i915_glk_hdmi),
HDA_CODEC_ENTRY(0x80862880, "CedarTrail HDMI", patch_generic_hdmi),
HDA_CODEC_ENTRY(0x80862882, "Valleyview2 HDMI", patch_i915_byt_hdmi),
HDA_CODEC_ENTRY(0x80862883, "Braswell HDMI", patch_i915_byt_hdmi),
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index cd6987b..a91a9ef 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -379,6 +379,7 @@
break;
case 0x10ec0899:
case 0x10ec0900:
+ case 0x10ec1168:
case 0x10ec1220:
alc_update_coef_idx(codec, 0x7, 1<<1, 0);
break;
@@ -2295,6 +2296,7 @@
SND_PCI_QUIRK(0x1043, 0x8691, "ASUS ROG Ranger VIII", ALC882_FIXUP_GPIO3),
SND_PCI_QUIRK(0x104d, 0x9047, "Sony Vaio TT", ALC889_FIXUP_VAIO_TT),
SND_PCI_QUIRK(0x104d, 0x905a, "Sony Vaio Z", ALC882_FIXUP_NO_PRIMARY_HP),
+ SND_PCI_QUIRK(0x104d, 0x9060, "Sony Vaio VPCL14M1R", ALC882_FIXUP_NO_PRIMARY_HP),
SND_PCI_QUIRK(0x104d, 0x9043, "Sony Vaio VGC-LN51JGB", ALC882_FIXUP_NO_PRIMARY_HP),
SND_PCI_QUIRK(0x104d, 0x9044, "Sony VAIO AiO", ALC882_FIXUP_NO_PRIMARY_HP),
@@ -3837,6 +3839,17 @@
}
}
+static struct coef_fw alc225_pre_hsmode[] = {
+ UPDATE_COEF(0x4a, 1<<8, 0),
+ UPDATE_COEFEX(0x57, 0x05, 1<<14, 0),
+ UPDATE_COEF(0x63, 3<<14, 3<<14),
+ UPDATE_COEF(0x4a, 3<<4, 2<<4),
+ UPDATE_COEF(0x4a, 3<<10, 3<<10),
+ UPDATE_COEF(0x45, 0x3f<<10, 0x34<<10),
+ UPDATE_COEF(0x4a, 3<<10, 0),
+ {}
+};
+
static void alc_headset_mode_unplugged(struct hda_codec *codec)
{
static struct coef_fw coef0255[] = {
@@ -3872,6 +3885,10 @@
UPDATE_COEF(0x67, 0x2000, 0),
{}
};
+ static struct coef_fw coef0298[] = {
+ UPDATE_COEF(0x19, 0x1300, 0x0300),
+ {}
+ };
static struct coef_fw coef0292[] = {
WRITE_COEF(0x76, 0x000e),
WRITE_COEF(0x6c, 0x2400),
@@ -3894,13 +3911,7 @@
{}
};
static struct coef_fw coef0225[] = {
- UPDATE_COEF(0x4a, 1<<8, 0),
- UPDATE_COEFEX(0x57, 0x05, 1<<14, 0),
- UPDATE_COEF(0x63, 3<<14, 3<<14),
- UPDATE_COEF(0x4a, 3<<4, 2<<4),
- UPDATE_COEF(0x4a, 3<<10, 3<<10),
- UPDATE_COEF(0x45, 0x3f<<10, 0x34<<10),
- UPDATE_COEF(0x4a, 3<<10, 0),
+ UPDATE_COEF(0x63, 3<<14, 0),
{}
};
static struct coef_fw coef0274[] = {
@@ -3934,7 +3945,10 @@
break;
case 0x10ec0286:
case 0x10ec0288:
+ alc_process_coef_fw(codec, coef0288);
+ break;
case 0x10ec0298:
+ alc_process_coef_fw(codec, coef0298);
alc_process_coef_fw(codec, coef0288);
break;
case 0x10ec0292:
@@ -3975,6 +3989,7 @@
{}
};
static struct coef_fw coef0288[] = {
+ UPDATE_COEF(0x4f, 0x00c0, 0),
UPDATE_COEF(0x50, 0x2000, 0),
UPDATE_COEF(0x56, 0x0006, 0),
UPDATE_COEF(0x4f, 0xfcc0, 0xc400),
@@ -4038,7 +4053,6 @@
case 0x10ec0286:
case 0x10ec0288:
case 0x10ec0298:
- alc_update_coef_idx(codec, 0x4f, 0x000c, 0);
snd_hda_set_pin_ctl_cache(codec, hp_pin, 0);
alc_process_coef_fw(codec, coef0288);
snd_hda_set_pin_ctl_cache(codec, mic_pin, PIN_VREF50);
@@ -4071,6 +4085,7 @@
case 0x10ec0225:
case 0x10ec0295:
case 0x10ec0299:
+ alc_process_coef_fw(codec, alc225_pre_hsmode);
alc_update_coef_idx(codec, 0x45, 0x3f<<10, 0x31<<10);
snd_hda_set_pin_ctl_cache(codec, hp_pin, 0);
alc_process_coef_fw(codec, coef0225);
@@ -4083,7 +4098,12 @@
static void alc_headset_mode_default(struct hda_codec *codec)
{
static struct coef_fw coef0225[] = {
- UPDATE_COEF(0x45, 0x3f<<10, 0x34<<10),
+ UPDATE_COEF(0x45, 0x3f<<10, 0x30<<10),
+ UPDATE_COEF(0x45, 0x3f<<10, 0x31<<10),
+ UPDATE_COEF(0x49, 3<<8, 0<<8),
+ UPDATE_COEF(0x4a, 3<<4, 3<<4),
+ UPDATE_COEF(0x63, 3<<14, 0),
+ UPDATE_COEF(0x67, 0xf000, 0x3000),
{}
};
static struct coef_fw coef0255[] = {
@@ -4137,6 +4157,7 @@
case 0x10ec0225:
case 0x10ec0295:
case 0x10ec0299:
+ alc_process_coef_fw(codec, alc225_pre_hsmode);
alc_process_coef_fw(codec, coef0225);
break;
case 0x10ec0255:
@@ -4176,6 +4197,8 @@
/* Iphone type */
static void alc_headset_mode_ctia(struct hda_codec *codec)
{
+ int val;
+
static struct coef_fw coef0255[] = {
WRITE_COEF(0x45, 0xd489), /* Set to CTIA type */
WRITE_COEF(0x1b, 0x0c2b),
@@ -4218,11 +4241,14 @@
WRITE_COEF(0xc3, 0x0000),
{}
};
- static struct coef_fw coef0225[] = {
+ static struct coef_fw coef0225_1[] = {
UPDATE_COEF(0x45, 0x3f<<10, 0x35<<10),
- UPDATE_COEF(0x49, 1<<8, 1<<8),
- UPDATE_COEF(0x4a, 7<<6, 7<<6),
- UPDATE_COEF(0x4a, 3<<4, 3<<4),
+ UPDATE_COEF(0x63, 3<<14, 2<<14),
+ {}
+ };
+ static struct coef_fw coef0225_2[] = {
+ UPDATE_COEF(0x45, 0x3f<<10, 0x35<<10),
+ UPDATE_COEF(0x63, 3<<14, 1<<14),
{}
};
@@ -4243,8 +4269,17 @@
alc_process_coef_fw(codec, coef0233);
break;
case 0x10ec0298:
- alc_update_coef_idx(codec, 0x8e, 0x0070, 0x0020);/* Headset output enable */
- /* ALC298 jack type setting is the same with ALC286/ALC288 */
+ val = alc_read_coef_idx(codec, 0x50);
+ if (val & (1 << 12)) {
+ alc_update_coef_idx(codec, 0x8e, 0x0070, 0x0020);
+ alc_update_coef_idx(codec, 0x4f, 0xfcc0, 0xd400);
+ msleep(300);
+ } else {
+ alc_update_coef_idx(codec, 0x8e, 0x0070, 0x0010);
+ alc_update_coef_idx(codec, 0x4f, 0xfcc0, 0xd400);
+ msleep(300);
+ }
+ break;
case 0x10ec0286:
case 0x10ec0288:
alc_update_coef_idx(codec, 0x4f, 0xfcc0, 0xd400);
@@ -4263,7 +4298,11 @@
case 0x10ec0225:
case 0x10ec0295:
case 0x10ec0299:
- alc_process_coef_fw(codec, coef0225);
+ val = alc_read_coef_idx(codec, 0x45);
+ if (val & (1 << 9))
+ alc_process_coef_fw(codec, coef0225_2);
+ else
+ alc_process_coef_fw(codec, coef0225_1);
break;
case 0x10ec0867:
alc_update_coefex_idx(codec, 0x57, 0x5, 1<<14, 0);
@@ -4319,9 +4358,7 @@
};
static struct coef_fw coef0225[] = {
UPDATE_COEF(0x45, 0x3f<<10, 0x39<<10),
- UPDATE_COEF(0x49, 1<<8, 1<<8),
- UPDATE_COEF(0x4a, 7<<6, 7<<6),
- UPDATE_COEF(0x4a, 3<<4, 3<<4),
+ UPDATE_COEF(0x63, 3<<14, 2<<14),
{}
};
@@ -4343,7 +4380,9 @@
break;
case 0x10ec0298:
alc_update_coef_idx(codec, 0x8e, 0x0070, 0x0010);/* Headset output enable */
- /* ALC298 jack type setting is the same with ALC286/ALC288 */
+ alc_update_coef_idx(codec, 0x4f, 0xfcc0, 0xe400);
+ msleep(300);
+ break;
case 0x10ec0286:
case 0x10ec0288:
alc_update_coef_idx(codec, 0x4f, 0xfcc0, 0xe400);
@@ -4383,6 +4422,14 @@
UPDATE_COEF(0x4f, 0xfcc0, 0xd400), /* Check Type */
{}
};
+ static struct coef_fw coef0298[] = {
+ UPDATE_COEF(0x50, 0x2000, 0x2000),
+ UPDATE_COEF(0x56, 0x0006, 0x0006),
+ UPDATE_COEF(0x66, 0x0008, 0),
+ UPDATE_COEF(0x67, 0x2000, 0),
+ UPDATE_COEF(0x19, 0x1300, 0x1300),
+ {}
+ };
static struct coef_fw coef0293[] = {
UPDATE_COEF(0x4a, 0x000f, 0x0008), /* Combo Jack auto detect */
WRITE_COEF(0x45, 0xD429), /* Set to ctia type */
@@ -4395,11 +4442,6 @@
WRITE_COEF(0xc3, 0x0c00),
{}
};
- static struct coef_fw coef0225[] = {
- UPDATE_COEF(0x45, 0x3f<<10, 0x34<<10),
- UPDATE_COEF(0x49, 1<<8, 1<<8),
- {}
- };
static struct coef_fw coef0274[] = {
UPDATE_COEF(0x4a, 0x0010, 0),
UPDATE_COEF(0x4a, 0x8000, 0),
@@ -4432,8 +4474,34 @@
is_ctia = (val & 0x0070) == 0x0070;
break;
case 0x10ec0298:
- alc_update_coef_idx(codec, 0x8e, 0x0070, 0x0020); /* Headset output enable */
- /* ALC298 check jack type is the same with ALC286/ALC288 */
+ snd_hda_codec_write(codec, 0x21, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE);
+ msleep(100);
+ snd_hda_codec_write(codec, 0x21, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL, 0x0);
+ msleep(200);
+
+ val = alc_read_coef_idx(codec, 0x50);
+ if (val & (1 << 12)) {
+ alc_update_coef_idx(codec, 0x8e, 0x0070, 0x0020);
+ alc_process_coef_fw(codec, coef0288);
+ msleep(350);
+ val = alc_read_coef_idx(codec, 0x50);
+ is_ctia = (val & 0x0070) == 0x0070;
+ } else {
+ alc_update_coef_idx(codec, 0x8e, 0x0070, 0x0010);
+ alc_process_coef_fw(codec, coef0288);
+ msleep(350);
+ val = alc_read_coef_idx(codec, 0x50);
+ is_ctia = (val & 0x0070) == 0x0070;
+ }
+ alc_process_coef_fw(codec, coef0298);
+ snd_hda_codec_write(codec, 0x21, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP);
+ msleep(75);
+ snd_hda_codec_write(codec, 0x21, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE);
+ break;
case 0x10ec0286:
case 0x10ec0288:
alc_process_coef_fw(codec, coef0288);
@@ -4462,10 +4530,25 @@
case 0x10ec0225:
case 0x10ec0295:
case 0x10ec0299:
- alc_process_coef_fw(codec, coef0225);
- msleep(800);
- val = alc_read_coef_idx(codec, 0x46);
- is_ctia = (val & 0x00f0) == 0x00f0;
+ alc_process_coef_fw(codec, alc225_pre_hsmode);
+ alc_update_coef_idx(codec, 0x67, 0xf000, 0x1000);
+ val = alc_read_coef_idx(codec, 0x45);
+ if (val & (1 << 9)) {
+ alc_update_coef_idx(codec, 0x45, 0x3f<<10, 0x34<<10);
+ alc_update_coef_idx(codec, 0x49, 3<<8, 2<<8);
+ msleep(800);
+ val = alc_read_coef_idx(codec, 0x46);
+ is_ctia = (val & 0x00f0) == 0x00f0;
+ } else {
+ alc_update_coef_idx(codec, 0x45, 0x3f<<10, 0x34<<10);
+ alc_update_coef_idx(codec, 0x49, 3<<8, 1<<8);
+ msleep(800);
+ val = alc_read_coef_idx(codec, 0x46);
+ is_ctia = (val & 0x00f0) == 0x00f0;
+ }
+ alc_update_coef_idx(codec, 0x4a, 7<<6, 7<<6);
+ alc_update_coef_idx(codec, 0x4a, 3<<4, 3<<4);
+ alc_update_coef_idx(codec, 0x67, 0xf000, 0x3000);
break;
case 0x10ec0867:
is_ctia = true;
@@ -5179,6 +5262,7 @@
ALC233_FIXUP_ASUS_MIC_NO_PRESENCE,
ALC233_FIXUP_EAPD_COEF_AND_MIC_NO_PRESENCE,
ALC233_FIXUP_LENOVO_MULTI_CODECS,
+ ALC294_FIXUP_LENOVO_MIC_LOCATION,
};
static const struct hda_fixup alc269_fixups[] = {
@@ -5962,6 +6046,18 @@
.type = HDA_FIXUP_FUNC,
.v.func = alc233_alc662_fixup_lenovo_dual_codecs,
},
+ [ALC294_FIXUP_LENOVO_MIC_LOCATION] = {
+ .type = HDA_FIXUP_PINS,
+ .v.pins = (const struct hda_pintbl[]) {
+ /* Change the mic location from front to right, otherwise there are
+ two front mics with the same name, pulseaudio can't handle them.
+ This is just a temporary workaround, after applying this fixup,
+ there will be one "Front Mic" and one "Mic" in this machine.
+ */
+ { 0x1a, 0x04a19040 },
+ { }
+ },
+ },
};
static const struct snd_pci_quirk alc269_fixup_tbl[] = {
@@ -6143,6 +6239,7 @@
SND_PCI_QUIRK(0x17aa, 0x2233, "Thinkpad", ALC292_FIXUP_TPT460),
SND_PCI_QUIRK(0x17aa, 0x30bb, "ThinkCentre AIO", ALC233_FIXUP_LENOVO_LINE2_MIC_HOTKEY),
SND_PCI_QUIRK(0x17aa, 0x30e2, "ThinkCentre AIO", ALC233_FIXUP_LENOVO_LINE2_MIC_HOTKEY),
+ SND_PCI_QUIRK(0x17aa, 0x310c, "ThinkCentre Station", ALC294_FIXUP_LENOVO_MIC_LOCATION),
SND_PCI_QUIRK(0x17aa, 0x3112, "ThinkCentre AIO", ALC233_FIXUP_LENOVO_LINE2_MIC_HOTKEY),
SND_PCI_QUIRK(0x17aa, 0x3902, "Lenovo E50-80", ALC269_FIXUP_DMIC_THINKPAD_ACPI),
SND_PCI_QUIRK(0x17aa, 0x3977, "IdeaPad S210", ALC283_FIXUP_INT_MIC),
@@ -6709,6 +6806,7 @@
case 0x10ec0225:
case 0x10ec0295:
spec->codec_variant = ALC269_TYPE_ALC225;
+ spec->gen.mixer_nid = 0; /* no loopback on ALC225 ALC295 */
break;
case 0x10ec0299:
spec->codec_variant = ALC269_TYPE_ALC225;
@@ -7801,6 +7899,7 @@
HDA_CODEC_ENTRY(0x10ec0892, "ALC892", patch_alc662),
HDA_CODEC_ENTRY(0x10ec0899, "ALC898", patch_alc882),
HDA_CODEC_ENTRY(0x10ec0900, "ALC1150", patch_alc882),
+ HDA_CODEC_ENTRY(0x10ec1168, "ALC1220", patch_alc882),
HDA_CODEC_ENTRY(0x10ec1220, "ALC1220", patch_alc882),
{} /* terminator */
};
diff --git a/sound/soc/codecs/msm8916-wcd-analog.c b/sound/soc/codecs/msm8916-wcd-analog.c
index a788029..5710fd4 100644
--- a/sound/soc/codecs/msm8916-wcd-analog.c
+++ b/sound/soc/codecs/msm8916-wcd-analog.c
@@ -36,7 +36,7 @@
#define CDC_D_CDC_DIG_CLK_CTL (0xf04A)
#define DIG_CLK_CTL_RXD1_CLK_EN BIT(0)
#define DIG_CLK_CTL_RXD2_CLK_EN BIT(1)
-#define DIG_CLK_CTL_RXD3_CLK_EN BIT(3)
+#define DIG_CLK_CTL_RXD3_CLK_EN BIT(2)
#define DIG_CLK_CTL_TXD_CLK_EN BIT(4)
#define DIG_CLK_CTL_NCP_CLK_EN_MASK BIT(6)
#define DIG_CLK_CTL_NCP_CLK_EN BIT(6)
diff --git a/sound/soc/codecs/rt5663.c b/sound/soc/codecs/rt5663.c
index a33202a..fa550e3 100644
--- a/sound/soc/codecs/rt5663.c
+++ b/sound/soc/codecs/rt5663.c
@@ -466,7 +466,7 @@
{ 0x0006, 0x1000 },
{ 0x000a, 0x0000 },
{ 0x0010, 0x000f },
- { 0x0015, 0x42c1 },
+ { 0x0015, 0x42f1 },
{ 0x0016, 0x0000 },
{ 0x0018, 0x000b },
{ 0x0019, 0xafaf },
@@ -509,7 +509,7 @@
{ 0x008a, 0x0000 },
{ 0x008b, 0x0000 },
{ 0x008c, 0x0003 },
- { 0x008e, 0x0004 },
+ { 0x008e, 0x0008 },
{ 0x008f, 0x1000 },
{ 0x0090, 0x0646 },
{ 0x0091, 0x0e3e },
@@ -520,7 +520,7 @@
{ 0x0098, 0x0000 },
{ 0x009a, 0x0000 },
{ 0x009f, 0x0000 },
- { 0x00ae, 0x2000 },
+ { 0x00ae, 0x6000 },
{ 0x00af, 0x0000 },
{ 0x00b6, 0x0000 },
{ 0x00b7, 0x0000 },
@@ -538,7 +538,7 @@
{ 0x00d9, 0x08f9 },
{ 0x00db, 0x0008 },
{ 0x00dc, 0x00c0 },
- { 0x00dd, 0x6724 },
+ { 0x00dd, 0x6729 },
{ 0x00de, 0x3131 },
{ 0x00df, 0x0008 },
{ 0x00e0, 0x4000 },
@@ -578,7 +578,7 @@
{ 0x0116, 0x0000 },
{ 0x0117, 0x0f00 },
{ 0x0118, 0x0006 },
- { 0x0125, 0x2224 },
+ { 0x0125, 0x2424 },
{ 0x0126, 0x5550 },
{ 0x0127, 0x0400 },
{ 0x0128, 0x7711 },
@@ -596,8 +596,8 @@
{ 0x0145, 0x0002 },
{ 0x0146, 0x0000 },
{ 0x0160, 0x0e80 },
- { 0x0161, 0x0020 },
- { 0x0162, 0x0080 },
+ { 0x0161, 0x0080 },
+ { 0x0162, 0x0200 },
{ 0x0163, 0x0800 },
{ 0x0164, 0x0000 },
{ 0x0165, 0x0000 },
@@ -676,8 +676,8 @@
{ 0x0251, 0x0000 },
{ 0x0252, 0x028a },
{ 0x02fa, 0x0000 },
- { 0x02fb, 0x0000 },
- { 0x02fc, 0x0000 },
+ { 0x02fb, 0x00a4 },
+ { 0x02fc, 0x0300 },
{ 0x0300, 0x0000 },
{ 0x03d0, 0x0000 },
{ 0x03d1, 0x0000 },
diff --git a/sound/soc/codecs/rt5665.c b/sound/soc/codecs/rt5665.c
index 370ed54d..e597c89 100644
--- a/sound/soc/codecs/rt5665.c
+++ b/sound/soc/codecs/rt5665.c
@@ -4368,12 +4368,12 @@
switch (dai->id) {
case RT5665_AIF2_1:
case RT5665_AIF2_2:
- snd_soc_update_bits(codec, RT5665_ADDA_CLK_1,
+ snd_soc_update_bits(codec, RT5665_ADDA_CLK_2,
RT5665_I2S_BCLK_MS2_MASK,
RT5665_I2S_BCLK_MS2_64);
break;
case RT5665_AIF3:
- snd_soc_update_bits(codec, RT5665_ADDA_CLK_1,
+ snd_soc_update_bits(codec, RT5665_ADDA_CLK_2,
RT5665_I2S_BCLK_MS3_MASK,
RT5665_I2S_BCLK_MS3_64);
break;
diff --git a/sound/soc/codecs/rt5665.h b/sound/soc/codecs/rt5665.h
index 1db5c6a..d95249c 100644
--- a/sound/soc/codecs/rt5665.h
+++ b/sound/soc/codecs/rt5665.h
@@ -1692,8 +1692,8 @@
#define RT5665_GP6_PIN_MASK (0x3 << 5)
#define RT5665_GP6_PIN_SFT 5
#define RT5665_GP6_PIN_GPIO6 (0x0 << 5)
-#define RT5665_GP6_PIN_BCLK3 (0x0 << 5)
-#define RT5665_GP6_PIN_PDM_SCL (0x1 << 5)
+#define RT5665_GP6_PIN_BCLK3 (0x1 << 5)
+#define RT5665_GP6_PIN_PDM_SCL (0x2 << 5)
#define RT5665_GP7_PIN_MASK (0x3 << 3)
#define RT5665_GP7_PIN_SFT 3
#define RT5665_GP7_PIN_GPIO7 (0x0 << 3)
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index 8f6814c..80f6d1d 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -409,7 +409,7 @@
static int avc_get_threshold(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
- struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
int db, i;
u16 reg = snd_soc_read(codec, SGTL5000_DAP_AVC_THRESHOLD);
@@ -442,7 +442,7 @@
static int avc_put_threshold(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
- struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
int db;
u16 reg;
diff --git a/sound/soc/fsl/imx-ssi.c b/sound/soc/fsl/imx-ssi.c
index b95132e..0679061 100644
--- a/sound/soc/fsl/imx-ssi.c
+++ b/sound/soc/fsl/imx-ssi.c
@@ -527,6 +527,10 @@
}
ssi->irq = platform_get_irq(pdev, 0);
+ if (ssi->irq < 0) {
+ dev_err(&pdev->dev, "Failed to get IRQ: %d\n", ssi->irq);
+ return ssi->irq;
+ }
ssi->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(ssi->clk)) {
diff --git a/sound/soc/generic/audio-graph-card.c b/sound/soc/generic/audio-graph-card.c
index 105ec3a..de2550c 100644
--- a/sound/soc/generic/audio-graph-card.c
+++ b/sound/soc/generic/audio-graph-card.c
@@ -224,9 +224,11 @@
of_for_each_phandle(&it, rc, node, "dais", NULL, 0) {
ret = asoc_graph_card_dai_link_of(it.node, priv, idx++);
- of_node_put(it.node);
- if (ret < 0)
+ if (ret < 0) {
+ of_node_put(it.node);
+
return ret;
+ }
}
return asoc_simple_card_parse_card_name(card, NULL);
@@ -239,10 +241,8 @@
int count = 0;
int rc;
- of_for_each_phandle(&it, rc, node, "dais", NULL, 0) {
+ of_for_each_phandle(&it, rc, node, "dais", NULL, 0)
count++;
- of_node_put(it.node);
- }
return count;
}
diff --git a/sound/soc/generic/audio-graph-scu-card.c b/sound/soc/generic/audio-graph-scu-card.c
index dcd2df3..758ac06 100644
--- a/sound/soc/generic/audio-graph-scu-card.c
+++ b/sound/soc/generic/audio-graph-scu-card.c
@@ -215,7 +215,6 @@
codec_ep = of_graph_get_remote_endpoint(cpu_ep);
rcpu_ep = of_graph_get_remote_endpoint(codec_ep);
- of_node_put(cpu_port);
of_node_put(cpu_ep);
of_node_put(codec_ep);
of_node_put(rcpu_ep);
@@ -232,8 +231,10 @@
ret = asoc_simple_card_parse_daifmt(dev, cpu_ep, codec_ep,
NULL, &daifmt);
- if (ret < 0)
+ if (ret < 0) {
+ of_node_put(cpu_port);
goto parse_of_err;
+ }
}
dai_idx = 0;
@@ -250,7 +251,6 @@
codec_ep = of_graph_get_remote_endpoint(cpu_ep);
codec_port = of_graph_get_port_parent(codec_ep);
- of_node_put(cpu_port);
of_node_put(cpu_ep);
of_node_put(codec_ep);
of_node_put(codec_port);
@@ -266,13 +266,17 @@
/* Back-End (= Codec) */
ret = asoc_graph_card_dai_link_of(codec_ep, priv, daifmt, dai_idx++, 0);
- if (ret < 0)
+ if (ret < 0) {
+ of_node_put(cpu_port);
goto parse_of_err;
+ }
} else {
/* Front-End (= CPU) */
ret = asoc_graph_card_dai_link_of(cpu_ep, priv, daifmt, dai_idx++, 1);
- if (ret < 0)
+ if (ret < 0) {
+ of_node_put(cpu_port);
goto parse_of_err;
+ }
}
}
}
@@ -306,7 +310,6 @@
codec_ep = of_graph_get_remote_endpoint(cpu_ep);
codec_port = of_graph_get_port_parent(codec_ep);
- of_node_put(cpu_port);
of_node_put(cpu_ep);
of_node_put(codec_ep);
of_node_put(codec_port);
diff --git a/sound/soc/generic/simple-card-utils.c b/sound/soc/generic/simple-card-utils.c
index 26d64fa..7d7ab4a 100644
--- a/sound/soc/generic/simple-card-utils.c
+++ b/sound/soc/generic/simple-card-utils.c
@@ -263,6 +263,9 @@
id = i;
i++;
}
+
+ of_node_put(node);
+
if (id < 0)
return -ENODEV;
@@ -282,11 +285,6 @@
if (!dai_name)
return 0;
- /*
- * of_graph_get_port_parent() will call
- * of_node_put(). So, call of_node_get() here
- */
- of_node_get(ep);
node = of_graph_get_port_parent(ep);
/* Get dai->name */
diff --git a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
index 3fe4a08..cfd89ca 100644
--- a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
+++ b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
@@ -319,7 +319,9 @@
int ret;
/* use ASRC for internal clocks, as PLL rate isn't multiple of BCLK */
- rt5663_sel_asrc_clk_src(codec_dai->codec, RT5663_DA_STEREO_FILTER, 1);
+ rt5663_sel_asrc_clk_src(codec_dai->codec,
+ RT5663_DA_STEREO_FILTER | RT5663_AD_STEREO_FILTER,
+ RT5663_CLK_SEL_I2S1_ASRC);
ret = snd_soc_dai_set_sysclk(codec_dai,
RT5663_SCLK_S_MCLK, 24576000, SND_SOC_CLOCK_IN);
@@ -349,19 +351,10 @@
return ret;
}
- ret = snd_soc_dai_set_pll(codec_dai, 0,
- RT5514_PLL1_S_BCLK, RT5514_AIF1_BCLK_FREQ,
- RT5514_AIF1_SYSCLK_FREQ);
- if (ret < 0) {
- dev_err(rtd->dev, "set bclk err: %d\n", ret);
- return ret;
- }
-
ret = snd_soc_dai_set_sysclk(codec_dai,
- RT5514_SCLK_S_PLL1, RT5514_AIF1_SYSCLK_FREQ,
- SND_SOC_CLOCK_IN);
+ RT5514_SCLK_S_MCLK, 24576000, SND_SOC_CLOCK_IN);
if (ret < 0) {
- dev_err(rtd->dev, "set sclk err: %d\n", ret);
+ dev_err(rtd->dev, "set sysclk err: %d\n", ret);
return ret;
}
}
diff --git a/sound/soc/intel/skylake/skl-messages.c b/sound/soc/intel/skylake/skl-messages.c
index eca8582..fb2f1f6 100644
--- a/sound/soc/intel/skylake/skl-messages.c
+++ b/sound/soc/intel/skylake/skl-messages.c
@@ -540,6 +540,14 @@
cpr_mconfig->gtw_cfg.dma_buffer_size =
mconfig->dma_buffer_size * dma_io_buf;
+ /* fallback to 2ms default value */
+ if (!cpr_mconfig->gtw_cfg.dma_buffer_size) {
+ if (mconfig->hw_conn_type == SKL_CONN_SOURCE)
+ cpr_mconfig->gtw_cfg.dma_buffer_size = 2 * mconfig->obs;
+ else
+ cpr_mconfig->gtw_cfg.dma_buffer_size = 2 * mconfig->ibs;
+ }
+
cpr_mconfig->cpr_feature_mask = 0;
cpr_mconfig->gtw_cfg.config_length = 0;
diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c
index 334917e..9e3f8c0 100644
--- a/sound/soc/intel/skylake/skl.c
+++ b/sound/soc/intel/skylake/skl.c
@@ -941,6 +941,7 @@
.machine_quirk = sst_acpi_codec_list,
.quirk_data = &bxt_codecs,
},
+ {}
};
static struct sst_acpi_mach sst_kbl_devdata[] = {
@@ -991,6 +992,7 @@
.drv_name = "glk_alc298s_i2s",
.fw_filename = "intel/dsp_fw_glk.bin",
},
+ {}
};
/* PCI IDs */
diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig
index 960744e..484ab3c 100644
--- a/sound/soc/pxa/Kconfig
+++ b/sound/soc/pxa/Kconfig
@@ -1,6 +1,7 @@
config SND_PXA2XX_SOC
tristate "SoC Audio for the Intel PXA2xx chip"
depends on ARCH_PXA || COMPILE_TEST
+ depends on HAS_DMA
select SND_PXA2XX_LIB
help
Say Y or M if you want to add support for codecs attached to
diff --git a/sound/soc/samsung/odroid.c b/sound/soc/samsung/odroid.c
index 0c0b00e..0834319 100644
--- a/sound/soc/samsung/odroid.c
+++ b/sound/soc/samsung/odroid.c
@@ -42,17 +42,17 @@
switch (params_rate(params)) {
case 32000:
case 64000:
- pll_freq = 131072000U;
+ pll_freq = 131072006U;
break;
case 44100:
case 88200:
case 176400:
- pll_freq = 180633600U;
+ pll_freq = 180633609U;
break;
case 48000:
case 96000:
case 192000:
- pll_freq = 196608000U;
+ pll_freq = 196608001U;
break;
default:
return -EINVAL;
diff --git a/sound/soc/sh/hac.c b/sound/soc/sh/hac.c
index 84c5103..624aaf5 100644
--- a/sound/soc/sh/hac.c
+++ b/sound/soc/sh/hac.c
@@ -315,6 +315,8 @@
static int hac_soc_platform_probe(struct platform_device *pdev)
{
+ int ret;
+
ret = snd_soc_set_ac97_ops(&hac_ac97_ops);
if (ret != 0)
return ret;
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 921622a..13c875e 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -3171,8 +3171,6 @@
component->remove = component->driver->remove;
component->suspend = component->driver->suspend;
component->resume = component->driver->resume;
- component->pcm_new = component->driver->pcm_new;
- component->pcm_free = component->driver->pcm_free;
dapm = &component->dapm;
dapm->dev = dev;
@@ -3360,25 +3358,6 @@
platform->driver->remove(platform);
}
-static int snd_soc_platform_drv_pcm_new(struct snd_soc_pcm_runtime *rtd)
-{
- struct snd_soc_platform *platform = rtd->platform;
-
- if (platform->driver->pcm_new)
- return platform->driver->pcm_new(rtd);
- else
- return 0;
-}
-
-static void snd_soc_platform_drv_pcm_free(struct snd_pcm *pcm)
-{
- struct snd_soc_pcm_runtime *rtd = pcm->private_data;
- struct snd_soc_platform *platform = rtd->platform;
-
- if (platform->driver->pcm_free)
- platform->driver->pcm_free(pcm);
-}
-
/**
* snd_soc_add_platform - Add a platform to the ASoC core
* @dev: The parent device for the platform
@@ -3402,10 +3381,6 @@
platform->component.probe = snd_soc_platform_drv_probe;
if (platform_drv->remove)
platform->component.remove = snd_soc_platform_drv_remove;
- if (platform_drv->pcm_new)
- platform->component.pcm_new = snd_soc_platform_drv_pcm_new;
- if (platform_drv->pcm_free)
- platform->component.pcm_free = snd_soc_platform_drv_pcm_free;
#ifdef CONFIG_DEBUG_FS
platform->component.debugfs_prefix = "platform";
@@ -4113,6 +4088,8 @@
}
mutex_unlock(&client_mutex);
+ of_node_put(node);
+
return ret;
}
EXPORT_SYMBOL_GPL(snd_soc_get_dai_id);
diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c
index dcc5ece..7d3859e 100644
--- a/sound/soc/soc-pcm.c
+++ b/sound/soc/soc-pcm.c
@@ -181,6 +181,10 @@
dev_dbg(be->dev, "ASoC: BE %s event %d dir %d\n",
be->dai_link->name, event, dir);
+ if ((event == SND_SOC_DAPM_STREAM_STOP) &&
+ (be->dpcm[dir].users >= 1))
+ continue;
+
snd_soc_dapm_stream_event(be, dir, event);
}
@@ -2628,25 +2632,12 @@
return ret;
}
-static void soc_pcm_free(struct snd_pcm *pcm)
-{
- struct snd_soc_pcm_runtime *rtd = pcm->private_data;
- struct snd_soc_component *component;
-
- list_for_each_entry(component, &rtd->card->component_dev_list,
- card_list) {
- if (component->pcm_free)
- component->pcm_free(pcm);
- }
-}
-
/* create a new pcm */
int soc_new_pcm(struct snd_soc_pcm_runtime *rtd, int num)
{
struct snd_soc_platform *platform = rtd->platform;
struct snd_soc_dai *codec_dai;
struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
- struct snd_soc_component *component;
struct snd_pcm *pcm;
char new_name[64];
int ret = 0, playback = 0, capture = 0;
@@ -2756,18 +2747,17 @@
if (capture)
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &rtd->ops);
- list_for_each_entry(component, &rtd->card->component_dev_list, card_list) {
- if (component->pcm_new) {
- ret = component->pcm_new(rtd);
- if (ret < 0) {
- dev_err(component->dev,
- "ASoC: pcm constructor failed: %d\n",
- ret);
- return ret;
- }
+ if (platform->driver->pcm_new) {
+ ret = platform->driver->pcm_new(rtd);
+ if (ret < 0) {
+ dev_err(platform->dev,
+ "ASoC: pcm constructor failed: %d\n",
+ ret);
+ return ret;
}
}
- pcm->private_free = soc_pcm_free;
+
+ pcm->private_free = platform->driver->pcm_free;
out:
dev_info(rtd->card->dev, "%s <-> %s mapping ok\n",
(rtd->num_codecs > 1) ? "multicodec" : rtd->codec_dai->name,
diff --git a/sound/soc/ux500/mop500.c b/sound/soc/ux500/mop500.c
index b50f68a..ba9fc09 100644
--- a/sound/soc/ux500/mop500.c
+++ b/sound/soc/ux500/mop500.c
@@ -33,6 +33,7 @@
.stream_name = "ab8500_0",
.cpu_dai_name = "ux500-msp-i2s.1",
.codec_dai_name = "ab8500-codec-dai.0",
+ .platform_name = "ux500-msp-i2s.1",
.codec_name = "ab8500-codec.0",
.init = mop500_ab8500_machine_init,
.ops = mop500_ab8500_ops,
@@ -42,6 +43,7 @@
.stream_name = "ab8500_1",
.cpu_dai_name = "ux500-msp-i2s.3",
.codec_dai_name = "ab8500-codec-dai.1",
+ .platform_name = "ux500-msp-i2s.3",
.codec_name = "ab8500-codec.0",
.init = NULL,
.ops = mop500_ab8500_ops,
@@ -85,6 +87,8 @@
for (i = 0; i < 2; i++) {
mop500_dai_links[i].cpu_of_node = msp_np[i];
mop500_dai_links[i].cpu_dai_name = NULL;
+ mop500_dai_links[i].platform_of_node = msp_np[i];
+ mop500_dai_links[i].platform_name = NULL;
mop500_dai_links[i].codec_of_node = codec_np;
mop500_dai_links[i].codec_name = NULL;
}
diff --git a/tools/kvm/kvm_stat/kvm_stat b/tools/kvm/kvm_stat/kvm_stat
index dd8f00cf..32283d8 100755
--- a/tools/kvm/kvm_stat/kvm_stat
+++ b/tools/kvm/kvm_stat/kvm_stat
@@ -474,7 +474,7 @@
@staticmethod
def is_field_wanted(fields_filter, field):
"""Indicate whether field is valid according to fields_filter."""
- if not fields_filter:
+ if not fields_filter or fields_filter == "help":
return True
return re.match(fields_filter, field) is not None
@@ -1413,8 +1413,8 @@
Requirements:
- Access to:
- /sys/kernel/debug/kvm
- /sys/kernel/debug/trace/events/*
+ %s
+ %s/events/*
/proc/pid/task
- /proc/sys/kernel/perf_event_paranoid < 1 if user has no
CAP_SYS_ADMIN and perf events are used.
@@ -1434,7 +1434,7 @@
s set update interval
x toggle reporting of stats for individual child trace events
Press any other key to refresh statistics immediately.
-"""
+""" % (PATH_DEBUGFS_KVM, PATH_DEBUGFS_TRACING)
class PlainHelpFormatter(optparse.IndentedHelpFormatter):
def format_description(self, description):
@@ -1496,7 +1496,8 @@
action='store',
default=DEFAULT_REGEX,
dest='fields',
- help='fields to display (regex)',
+ help='''fields to display (regex)
+ "-f help" for a list of available events''',
)
optparser.add_option('-p', '--pid',
action='store',
@@ -1559,6 +1560,17 @@
stats = Stats(options)
+ if options.fields == "help":
+ event_list = "\n"
+ s = stats.get()
+ for key in s.keys():
+ if key.find('(') != -1:
+ key = key[0:key.find('(')]
+ if event_list.find('\n' + key + '\n') == -1:
+ event_list += key + '\n'
+ sys.stdout.write(event_list)
+ return ""
+
if options.log:
log(stats)
elif not options.once:
diff --git a/tools/lib/bpf/bpf.c b/tools/lib/bpf/bpf.c
index 7e0405e..256f571 100644
--- a/tools/lib/bpf/bpf.c
+++ b/tools/lib/bpf/bpf.c
@@ -120,7 +120,7 @@
int bpf_verify_program(enum bpf_prog_type type, const struct bpf_insn *insns,
size_t insns_cnt, int strict_alignment,
const char *license, __u32 kern_version,
- char *log_buf, size_t log_buf_sz)
+ char *log_buf, size_t log_buf_sz, int log_level)
{
union bpf_attr attr;
@@ -131,7 +131,7 @@
attr.license = ptr_to_u64(license);
attr.log_buf = ptr_to_u64(log_buf);
attr.log_size = log_buf_sz;
- attr.log_level = 2;
+ attr.log_level = log_level;
log_buf[0] = 0;
attr.kern_version = kern_version;
attr.prog_flags = strict_alignment ? BPF_F_STRICT_ALIGNMENT : 0;
@@ -314,7 +314,6 @@
int err;
bzero(&attr, sizeof(attr));
- bzero(info, *info_len);
attr.info.bpf_fd = prog_fd;
attr.info.info_len = *info_len;
attr.info.info = ptr_to_u64(info);
diff --git a/tools/lib/bpf/bpf.h b/tools/lib/bpf/bpf.h
index 16de44a..418c86e 100644
--- a/tools/lib/bpf/bpf.h
+++ b/tools/lib/bpf/bpf.h
@@ -38,7 +38,7 @@
int bpf_verify_program(enum bpf_prog_type type, const struct bpf_insn *insns,
size_t insns_cnt, int strict_alignment,
const char *license, __u32 kern_version,
- char *log_buf, size_t log_buf_sz);
+ char *log_buf, size_t log_buf_sz, int log_level);
int bpf_map_update_elem(int fd, const void *key, const void *value,
__u64 flags);
diff --git a/tools/perf/builtin-kmem.c b/tools/perf/builtin-kmem.c
index 0a8a1c4..a1497c5 100644
--- a/tools/perf/builtin-kmem.c
+++ b/tools/perf/builtin-kmem.c
@@ -643,7 +643,7 @@
{ "__GFP_FS", "F" },
{ "__GFP_COLD", "CO" },
{ "__GFP_NOWARN", "NWR" },
- { "__GFP_REPEAT", "R" },
+ { "__GFP_RETRY_MAYFAIL", "R" },
{ "__GFP_NOFAIL", "NF" },
{ "__GFP_NORETRY", "NR" },
{ "__GFP_COMP", "C" },
diff --git a/tools/perf/ui/browser.c b/tools/perf/ui/browser.c
index a4d3762..83874b0 100644
--- a/tools/perf/ui/browser.c
+++ b/tools/perf/ui/browser.c
@@ -704,7 +704,7 @@
ui_browser__gotorc(browser, row, column + 1);
SLsmg_draw_hline(2);
- if (row++ == 0)
+ if (++row == 0)
goto out;
} else
row = 0;
diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c
index 87b4318..413f74d 100644
--- a/tools/perf/util/evsel.c
+++ b/tools/perf/util/evsel.c
@@ -273,7 +273,7 @@
struct perf_event_attr attr = {
.type = PERF_TYPE_HARDWARE,
.config = PERF_COUNT_HW_CPU_CYCLES,
- .exclude_kernel = 1,
+ .exclude_kernel = geteuid() != 0,
};
struct perf_evsel *evsel;
@@ -298,8 +298,10 @@
goto out;
/* use asprintf() because free(evsel) assumes name is allocated */
- if (asprintf(&evsel->name, "cycles%.*s",
- attr.precise_ip ? attr.precise_ip + 1 : 0, ":ppp") < 0)
+ if (asprintf(&evsel->name, "cycles%s%s%.*s",
+ (attr.precise_ip || attr.exclude_kernel) ? ":" : "",
+ attr.exclude_kernel ? "u" : "",
+ attr.precise_ip ? attr.precise_ip + 1 : 0, "ppp") < 0)
goto error_free;
out:
return evsel;
diff --git a/tools/perf/util/machine.c b/tools/perf/util/machine.c
index 5de2b86..2e9eb6a 100644
--- a/tools/perf/util/machine.c
+++ b/tools/perf/util/machine.c
@@ -2209,7 +2209,7 @@
machine->kernel_start = 1ULL << 63;
if (map) {
err = map__load(map);
- if (map->start)
+ if (!err)
machine->kernel_start = map->start;
}
return err;
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
index 2ca51a8..153c3a1 100644
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -37,6 +37,5 @@
%.o: %.c
$(CLANG) -I. -I./include/uapi -I../../../include/uapi \
- -I../../../../samples/bpf/ \
-Wno-compare-distinct-pointer-types \
-O2 -target bpf -c $< -o $@
diff --git a/tools/testing/selftests/bpf/bpf_endian.h b/tools/testing/selftests/bpf/bpf_endian.h
index 487cbfb..74af266 100644
--- a/tools/testing/selftests/bpf/bpf_endian.h
+++ b/tools/testing/selftests/bpf/bpf_endian.h
@@ -23,11 +23,19 @@
# define __bpf_htons(x) __builtin_bswap16(x)
# define __bpf_constant_ntohs(x) ___constant_swab16(x)
# define __bpf_constant_htons(x) ___constant_swab16(x)
+# define __bpf_ntohl(x) __builtin_bswap32(x)
+# define __bpf_htonl(x) __builtin_bswap32(x)
+# define __bpf_constant_ntohl(x) ___constant_swab32(x)
+# define __bpf_constant_htonl(x) ___constant_swab32(x)
#elif __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
# define __bpf_ntohs(x) (x)
# define __bpf_htons(x) (x)
# define __bpf_constant_ntohs(x) (x)
# define __bpf_constant_htons(x) (x)
+# define __bpf_ntohl(x) (x)
+# define __bpf_htonl(x) (x)
+# define __bpf_constant_ntohl(x) (x)
+# define __bpf_constant_htonl(x) (x)
#else
# error "Fix your compiler's __BYTE_ORDER__?!"
#endif
@@ -38,5 +46,11 @@
#define bpf_ntohs(x) \
(__builtin_constant_p(x) ? \
__bpf_constant_ntohs(x) : __bpf_ntohs(x))
+#define bpf_htonl(x) \
+ (__builtin_constant_p(x) ? \
+ __bpf_constant_htonl(x) : __bpf_htonl(x))
+#define bpf_ntohl(x) \
+ (__builtin_constant_p(x) ? \
+ __bpf_constant_ntohl(x) : __bpf_ntohl(x))
#endif /* __BPF_ENDIAN__ */
diff --git a/samples/bpf/bpf_helpers.h b/tools/testing/selftests/bpf/bpf_helpers.h
similarity index 100%
rename from samples/bpf/bpf_helpers.h
rename to tools/testing/selftests/bpf/bpf_helpers.h
diff --git a/tools/testing/selftests/bpf/test_align.c b/tools/testing/selftests/bpf/test_align.c
index bccebd9..2979369 100644
--- a/tools/testing/selftests/bpf/test_align.c
+++ b/tools/testing/selftests/bpf/test_align.c
@@ -380,7 +380,7 @@
prog_len = probe_filter_length(prog);
fd_prog = bpf_verify_program(prog_type ? : BPF_PROG_TYPE_SOCKET_FILTER,
prog, prog_len, 1, "GPL", 0,
- bpf_vlog, sizeof(bpf_vlog));
+ bpf_vlog, sizeof(bpf_vlog), 2);
if (fd_prog < 0) {
printf("Failed to load program.\n");
printf("%s", bpf_vlog);
diff --git a/tools/testing/selftests/bpf/test_progs.c b/tools/testing/selftests/bpf/test_progs.c
index 5855cd3..1f7dd35 100644
--- a/tools/testing/selftests/bpf/test_progs.c
+++ b/tools/testing/selftests/bpf/test_progs.c
@@ -340,6 +340,7 @@
/* Check getting prog info */
info_len = sizeof(struct bpf_prog_info) * 2;
+ bzero(&prog_infos[i], info_len);
prog_infos[i].jited_prog_insns = ptr_to_u64(jited_insns);
prog_infos[i].jited_prog_len = sizeof(jited_insns);
prog_infos[i].xlated_prog_insns = ptr_to_u64(xlated_insns);
@@ -369,6 +370,7 @@
/* Check getting map info */
info_len = sizeof(struct bpf_map_info) * 2;
+ bzero(&map_infos[i], info_len);
err = bpf_obj_get_info_by_fd(map_fds[i], &map_infos[i],
&info_len);
if (CHECK(err ||
@@ -394,7 +396,7 @@
nr_id_found = 0;
next_id = 0;
while (!bpf_prog_get_next_id(next_id, &next_id)) {
- struct bpf_prog_info prog_info;
+ struct bpf_prog_info prog_info = {};
int prog_fd;
info_len = sizeof(prog_info);
@@ -418,6 +420,8 @@
nr_id_found++;
err = bpf_obj_get_info_by_fd(prog_fd, &prog_info, &info_len);
+ prog_infos[i].jited_prog_insns = 0;
+ prog_infos[i].xlated_prog_insns = 0;
CHECK(err || info_len != sizeof(struct bpf_prog_info) ||
memcmp(&prog_info, &prog_infos[i], info_len),
"get-prog-info(next_id->fd)",
@@ -436,7 +440,7 @@
nr_id_found = 0;
next_id = 0;
while (!bpf_map_get_next_id(next_id, &next_id)) {
- struct bpf_map_info map_info;
+ struct bpf_map_info map_info = {};
int map_fd;
info_len = sizeof(map_info);
diff --git a/tools/testing/selftests/bpf/test_verifier.c b/tools/testing/selftests/bpf/test_verifier.c
index 404aec5..addea82 100644
--- a/tools/testing/selftests/bpf/test_verifier.c
+++ b/tools/testing/selftests/bpf/test_verifier.c
@@ -4969,7 +4969,7 @@
BPF_JMP_IMM(BPF_JSGT, BPF_REG_2,
sizeof(struct test_val), 4),
BPF_MOV64_IMM(BPF_REG_4, 0),
- BPF_JMP_REG(BPF_JGE, BPF_REG_4, BPF_REG_2, 2),
+ BPF_JMP_REG(BPF_JSGE, BPF_REG_4, BPF_REG_2, 2),
BPF_MOV64_IMM(BPF_REG_3, 0),
BPF_EMIT_CALL(BPF_FUNC_probe_read),
BPF_MOV64_IMM(BPF_REG_0, 0),
@@ -4995,7 +4995,7 @@
BPF_JMP_IMM(BPF_JSGT, BPF_REG_2,
sizeof(struct test_val) + 1, 4),
BPF_MOV64_IMM(BPF_REG_4, 0),
- BPF_JMP_REG(BPF_JGE, BPF_REG_4, BPF_REG_2, 2),
+ BPF_JMP_REG(BPF_JSGE, BPF_REG_4, BPF_REG_2, 2),
BPF_MOV64_IMM(BPF_REG_3, 0),
BPF_EMIT_CALL(BPF_FUNC_probe_read),
BPF_MOV64_IMM(BPF_REG_0, 0),
@@ -5023,7 +5023,7 @@
BPF_JMP_IMM(BPF_JSGT, BPF_REG_2,
sizeof(struct test_val) - 20, 4),
BPF_MOV64_IMM(BPF_REG_4, 0),
- BPF_JMP_REG(BPF_JGE, BPF_REG_4, BPF_REG_2, 2),
+ BPF_JMP_REG(BPF_JSGE, BPF_REG_4, BPF_REG_2, 2),
BPF_MOV64_IMM(BPF_REG_3, 0),
BPF_EMIT_CALL(BPF_FUNC_probe_read),
BPF_MOV64_IMM(BPF_REG_0, 0),
@@ -5050,7 +5050,7 @@
BPF_JMP_IMM(BPF_JSGT, BPF_REG_2,
sizeof(struct test_val) - 19, 4),
BPF_MOV64_IMM(BPF_REG_4, 0),
- BPF_JMP_REG(BPF_JGE, BPF_REG_4, BPF_REG_2, 2),
+ BPF_JMP_REG(BPF_JSGE, BPF_REG_4, BPF_REG_2, 2),
BPF_MOV64_IMM(BPF_REG_3, 0),
BPF_EMIT_CALL(BPF_FUNC_probe_read),
BPF_MOV64_IMM(BPF_REG_0, 0),
@@ -5510,6 +5510,504 @@
.errstr = "invalid bpf_context access",
.prog_type = BPF_PROG_TYPE_LWT_IN,
},
+ {
+ "bounds checks mixing signed and unsigned, positive bounds",
+ .insns = {
+ BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
+ BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+ BPF_LD_MAP_FD(BPF_REG_1, 0),
+ BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
+ BPF_FUNC_map_lookup_elem),
+ BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 7),
+ BPF_ST_MEM(BPF_DW, BPF_REG_10, -16, -8),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_1, BPF_REG_10, -16),
+ BPF_MOV64_IMM(BPF_REG_2, 2),
+ BPF_JMP_REG(BPF_JGE, BPF_REG_2, BPF_REG_1, 3),
+ BPF_JMP_IMM(BPF_JSGT, BPF_REG_1, 4, 2),
+ BPF_ALU64_REG(BPF_ADD, BPF_REG_0, BPF_REG_1),
+ BPF_ST_MEM(BPF_B, BPF_REG_0, 0, 0),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .fixup_map1 = { 3 },
+ .errstr_unpriv = "R0 pointer arithmetic prohibited",
+ .errstr = "R0 min value is negative",
+ .result = REJECT,
+ .result_unpriv = REJECT,
+ },
+ {
+ "bounds checks mixing signed and unsigned",
+ .insns = {
+ BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
+ BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+ BPF_LD_MAP_FD(BPF_REG_1, 0),
+ BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
+ BPF_FUNC_map_lookup_elem),
+ BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 7),
+ BPF_ST_MEM(BPF_DW, BPF_REG_10, -16, -8),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_1, BPF_REG_10, -16),
+ BPF_MOV64_IMM(BPF_REG_2, -1),
+ BPF_JMP_REG(BPF_JGT, BPF_REG_1, BPF_REG_2, 3),
+ BPF_JMP_IMM(BPF_JSGT, BPF_REG_1, 1, 2),
+ BPF_ALU64_REG(BPF_ADD, BPF_REG_0, BPF_REG_1),
+ BPF_ST_MEM(BPF_B, BPF_REG_0, 0, 0),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .fixup_map1 = { 3 },
+ .errstr_unpriv = "R0 pointer arithmetic prohibited",
+ .errstr = "R0 min value is negative",
+ .result = REJECT,
+ .result_unpriv = REJECT,
+ },
+ {
+ "bounds checks mixing signed and unsigned, variant 2",
+ .insns = {
+ BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
+ BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+ BPF_LD_MAP_FD(BPF_REG_1, 0),
+ BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
+ BPF_FUNC_map_lookup_elem),
+ BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 9),
+ BPF_ST_MEM(BPF_DW, BPF_REG_10, -16, -8),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_1, BPF_REG_10, -16),
+ BPF_MOV64_IMM(BPF_REG_2, -1),
+ BPF_JMP_REG(BPF_JGT, BPF_REG_1, BPF_REG_2, 5),
+ BPF_MOV64_IMM(BPF_REG_8, 0),
+ BPF_ALU64_REG(BPF_ADD, BPF_REG_8, BPF_REG_1),
+ BPF_JMP_IMM(BPF_JSGT, BPF_REG_8, 1, 2),
+ BPF_ALU64_REG(BPF_ADD, BPF_REG_0, BPF_REG_8),
+ BPF_ST_MEM(BPF_B, BPF_REG_8, 0, 0),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .fixup_map1 = { 3 },
+ .errstr_unpriv = "R0 pointer arithmetic prohibited",
+ .errstr = "R8 invalid mem access 'inv'",
+ .result = REJECT,
+ .result_unpriv = REJECT,
+ },
+ {
+ "bounds checks mixing signed and unsigned, variant 3",
+ .insns = {
+ BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
+ BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+ BPF_LD_MAP_FD(BPF_REG_1, 0),
+ BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
+ BPF_FUNC_map_lookup_elem),
+ BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 8),
+ BPF_ST_MEM(BPF_DW, BPF_REG_10, -16, -8),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_1, BPF_REG_10, -16),
+ BPF_MOV64_IMM(BPF_REG_2, -1),
+ BPF_JMP_REG(BPF_JGT, BPF_REG_1, BPF_REG_2, 4),
+ BPF_MOV64_REG(BPF_REG_8, BPF_REG_1),
+ BPF_JMP_IMM(BPF_JSGT, BPF_REG_8, 1, 2),
+ BPF_ALU64_REG(BPF_ADD, BPF_REG_0, BPF_REG_8),
+ BPF_ST_MEM(BPF_B, BPF_REG_8, 0, 0),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .fixup_map1 = { 3 },
+ .errstr_unpriv = "R0 pointer arithmetic prohibited",
+ .errstr = "R8 invalid mem access 'inv'",
+ .result = REJECT,
+ .result_unpriv = REJECT,
+ },
+ {
+ "bounds checks mixing signed and unsigned, variant 4",
+ .insns = {
+ BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
+ BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+ BPF_LD_MAP_FD(BPF_REG_1, 0),
+ BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
+ BPF_FUNC_map_lookup_elem),
+ BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 7),
+ BPF_ST_MEM(BPF_DW, BPF_REG_10, -16, -8),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_1, BPF_REG_10, -16),
+ BPF_MOV64_IMM(BPF_REG_2, 1),
+ BPF_ALU64_REG(BPF_AND, BPF_REG_1, BPF_REG_2),
+ BPF_JMP_IMM(BPF_JSGT, BPF_REG_1, 1, 2),
+ BPF_ALU64_REG(BPF_ADD, BPF_REG_0, BPF_REG_1),
+ BPF_ST_MEM(BPF_B, BPF_REG_0, 0, 0),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .fixup_map1 = { 3 },
+ .errstr_unpriv = "R0 pointer arithmetic prohibited",
+ .errstr = "R0 min value is negative",
+ .result = REJECT,
+ .result_unpriv = REJECT,
+ },
+ {
+ "bounds checks mixing signed and unsigned, variant 5",
+ .insns = {
+ BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
+ BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+ BPF_LD_MAP_FD(BPF_REG_1, 0),
+ BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
+ BPF_FUNC_map_lookup_elem),
+ BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 9),
+ BPF_ST_MEM(BPF_DW, BPF_REG_10, -16, -8),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_1, BPF_REG_10, -16),
+ BPF_MOV64_IMM(BPF_REG_2, -1),
+ BPF_JMP_REG(BPF_JGT, BPF_REG_1, BPF_REG_2, 5),
+ BPF_JMP_IMM(BPF_JSGT, BPF_REG_1, 1, 4),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_0, 4),
+ BPF_ALU64_REG(BPF_SUB, BPF_REG_0, BPF_REG_1),
+ BPF_ST_MEM(BPF_B, BPF_REG_0, 0, 0),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .fixup_map1 = { 3 },
+ .errstr_unpriv = "R0 pointer arithmetic prohibited",
+ .errstr = "R0 invalid mem access",
+ .result = REJECT,
+ .result_unpriv = REJECT,
+ },
+ {
+ "bounds checks mixing signed and unsigned, variant 6",
+ .insns = {
+ BPF_MOV64_IMM(BPF_REG_2, 0),
+ BPF_MOV64_REG(BPF_REG_3, BPF_REG_10),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_3, -512),
+ BPF_ST_MEM(BPF_DW, BPF_REG_10, -16, -8),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_4, BPF_REG_10, -16),
+ BPF_MOV64_IMM(BPF_REG_6, -1),
+ BPF_JMP_REG(BPF_JGT, BPF_REG_4, BPF_REG_6, 5),
+ BPF_JMP_IMM(BPF_JSGT, BPF_REG_4, 1, 4),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_4, 1),
+ BPF_MOV64_IMM(BPF_REG_5, 0),
+ BPF_ST_MEM(BPF_H, BPF_REG_10, -512, 0),
+ BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
+ BPF_FUNC_skb_load_bytes),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .errstr_unpriv = "R4 min value is negative, either use unsigned",
+ .errstr = "R4 min value is negative, either use unsigned",
+ .result = REJECT,
+ .result_unpriv = REJECT,
+ },
+ {
+ "bounds checks mixing signed and unsigned, variant 7",
+ .insns = {
+ BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
+ BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+ BPF_LD_MAP_FD(BPF_REG_1, 0),
+ BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
+ BPF_FUNC_map_lookup_elem),
+ BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 7),
+ BPF_ST_MEM(BPF_DW, BPF_REG_10, -16, -8),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_1, BPF_REG_10, -16),
+ BPF_MOV64_IMM(BPF_REG_2, 1024 * 1024 * 1024),
+ BPF_JMP_REG(BPF_JGT, BPF_REG_1, BPF_REG_2, 3),
+ BPF_JMP_IMM(BPF_JSGT, BPF_REG_1, 1, 2),
+ BPF_ALU64_REG(BPF_ADD, BPF_REG_0, BPF_REG_1),
+ BPF_ST_MEM(BPF_B, BPF_REG_0, 0, 0),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .fixup_map1 = { 3 },
+ .errstr_unpriv = "R0 pointer arithmetic prohibited",
+ .errstr = "R0 min value is negative",
+ .result = REJECT,
+ .result_unpriv = REJECT,
+ },
+ {
+ "bounds checks mixing signed and unsigned, variant 8",
+ .insns = {
+ BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
+ BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+ BPF_LD_MAP_FD(BPF_REG_1, 0),
+ BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
+ BPF_FUNC_map_lookup_elem),
+ BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 7),
+ BPF_ST_MEM(BPF_DW, BPF_REG_10, -16, -8),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_1, BPF_REG_10, -16),
+ BPF_MOV64_IMM(BPF_REG_2, 1024 * 1024 * 1024 + 1),
+ BPF_JMP_REG(BPF_JGT, BPF_REG_1, BPF_REG_2, 3),
+ BPF_JMP_IMM(BPF_JSGT, BPF_REG_1, 1, 2),
+ BPF_ALU64_REG(BPF_ADD, BPF_REG_0, BPF_REG_1),
+ BPF_ST_MEM(BPF_B, BPF_REG_0, 0, 0),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .fixup_map1 = { 3 },
+ .errstr_unpriv = "R0 pointer arithmetic prohibited",
+ .errstr = "R0 min value is negative",
+ .result = REJECT,
+ .result_unpriv = REJECT,
+ },
+ {
+ "bounds checks mixing signed and unsigned, variant 9",
+ .insns = {
+ BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
+ BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+ BPF_LD_MAP_FD(BPF_REG_1, 0),
+ BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
+ BPF_FUNC_map_lookup_elem),
+ BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 9),
+ BPF_ST_MEM(BPF_DW, BPF_REG_10, -16, -8),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_1, BPF_REG_10, -16),
+ BPF_MOV64_IMM(BPF_REG_2, -1),
+ BPF_JMP_REG(BPF_JGT, BPF_REG_2, BPF_REG_1, 2),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ BPF_JMP_IMM(BPF_JSGT, BPF_REG_1, 1, 2),
+ BPF_ALU64_REG(BPF_ADD, BPF_REG_0, BPF_REG_1),
+ BPF_ST_MEM(BPF_B, BPF_REG_0, 0, 0),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .fixup_map1 = { 3 },
+ .errstr_unpriv = "R0 pointer arithmetic prohibited",
+ .errstr = "R0 min value is negative",
+ .result = REJECT,
+ .result_unpriv = REJECT,
+ },
+ {
+ "bounds checks mixing signed and unsigned, variant 10",
+ .insns = {
+ BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
+ BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+ BPF_LD_MAP_FD(BPF_REG_1, 0),
+ BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
+ BPF_FUNC_map_lookup_elem),
+ BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 10),
+ BPF_ST_MEM(BPF_DW, BPF_REG_10, -16, -8),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_1, BPF_REG_10, -16),
+ BPF_LD_IMM64(BPF_REG_2, -9223372036854775808ULL),
+ BPF_JMP_REG(BPF_JGT, BPF_REG_2, BPF_REG_1, 2),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ BPF_JMP_IMM(BPF_JSGT, BPF_REG_1, 1, 2),
+ BPF_ALU64_REG(BPF_ADD, BPF_REG_0, BPF_REG_1),
+ BPF_ST_MEM(BPF_B, BPF_REG_0, 0, 0),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .fixup_map1 = { 3 },
+ .errstr_unpriv = "R0 pointer arithmetic prohibited",
+ .errstr = "R0 min value is negative",
+ .result = REJECT,
+ .result_unpriv = REJECT,
+ },
+ {
+ "bounds checks mixing signed and unsigned, variant 11",
+ .insns = {
+ BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
+ BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+ BPF_LD_MAP_FD(BPF_REG_1, 0),
+ BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
+ BPF_FUNC_map_lookup_elem),
+ BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 9),
+ BPF_ST_MEM(BPF_DW, BPF_REG_10, -16, -8),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_1, BPF_REG_10, -16),
+ BPF_MOV64_IMM(BPF_REG_2, 0),
+ BPF_JMP_REG(BPF_JGT, BPF_REG_2, BPF_REG_1, 2),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ BPF_JMP_IMM(BPF_JSGT, BPF_REG_1, 1, 2),
+ BPF_ALU64_REG(BPF_ADD, BPF_REG_0, BPF_REG_1),
+ BPF_ST_MEM(BPF_B, BPF_REG_0, 0, 0),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .fixup_map1 = { 3 },
+ .errstr_unpriv = "R0 pointer arithmetic prohibited",
+ .errstr = "R0 min value is negative",
+ .result = REJECT,
+ .result_unpriv = REJECT,
+ },
+ {
+ "bounds checks mixing signed and unsigned, variant 12",
+ .insns = {
+ BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
+ BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+ BPF_LD_MAP_FD(BPF_REG_1, 0),
+ BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
+ BPF_FUNC_map_lookup_elem),
+ BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 9),
+ BPF_ST_MEM(BPF_DW, BPF_REG_10, -16, -8),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_1, BPF_REG_10, -16),
+ BPF_MOV64_IMM(BPF_REG_2, -1),
+ BPF_JMP_REG(BPF_JGE, BPF_REG_2, BPF_REG_1, 2),
+ /* Dead branch. */
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ BPF_JMP_IMM(BPF_JSGT, BPF_REG_1, 1, 2),
+ BPF_ALU64_REG(BPF_ADD, BPF_REG_0, BPF_REG_1),
+ BPF_ST_MEM(BPF_B, BPF_REG_0, 0, 0),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .fixup_map1 = { 3 },
+ .errstr_unpriv = "R0 pointer arithmetic prohibited",
+ .errstr = "R0 min value is negative",
+ .result = REJECT,
+ .result_unpriv = REJECT,
+ },
+ {
+ "bounds checks mixing signed and unsigned, variant 13",
+ .insns = {
+ BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
+ BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+ BPF_LD_MAP_FD(BPF_REG_1, 0),
+ BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
+ BPF_FUNC_map_lookup_elem),
+ BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 9),
+ BPF_ST_MEM(BPF_DW, BPF_REG_10, -16, -8),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_1, BPF_REG_10, -16),
+ BPF_MOV64_IMM(BPF_REG_2, -6),
+ BPF_JMP_REG(BPF_JGE, BPF_REG_2, BPF_REG_1, 2),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ BPF_JMP_IMM(BPF_JSGT, BPF_REG_1, 1, 2),
+ BPF_ALU64_REG(BPF_ADD, BPF_REG_0, BPF_REG_1),
+ BPF_ST_MEM(BPF_B, BPF_REG_0, 0, 0),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .fixup_map1 = { 3 },
+ .errstr_unpriv = "R0 pointer arithmetic prohibited",
+ .errstr = "R0 min value is negative",
+ .result = REJECT,
+ .result_unpriv = REJECT,
+ },
+ {
+ "bounds checks mixing signed and unsigned, variant 14",
+ .insns = {
+ BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
+ BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+ BPF_LD_MAP_FD(BPF_REG_1, 0),
+ BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
+ BPF_FUNC_map_lookup_elem),
+ BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 6),
+ BPF_ST_MEM(BPF_DW, BPF_REG_10, -16, -8),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_1, BPF_REG_10, -16),
+ BPF_MOV64_IMM(BPF_REG_2, 2),
+ BPF_JMP_REG(BPF_JGE, BPF_REG_2, BPF_REG_1, 2),
+ BPF_MOV64_IMM(BPF_REG_7, 1),
+ BPF_JMP_IMM(BPF_JSGT, BPF_REG_7, 0, 2),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ BPF_ALU64_REG(BPF_ADD, BPF_REG_7, BPF_REG_1),
+ BPF_JMP_IMM(BPF_JSGT, BPF_REG_7, 4, 2),
+ BPF_ALU64_REG(BPF_ADD, BPF_REG_0, BPF_REG_7),
+ BPF_ST_MEM(BPF_B, BPF_REG_0, 0, 0),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .fixup_map1 = { 3 },
+ .errstr_unpriv = "R0 pointer arithmetic prohibited",
+ .errstr = "R0 min value is negative",
+ .result = REJECT,
+ .result_unpriv = REJECT,
+ },
+ {
+ "bounds checks mixing signed and unsigned, variant 15",
+ .insns = {
+ BPF_LDX_MEM(BPF_W, BPF_REG_9, BPF_REG_1,
+ offsetof(struct __sk_buff, mark)),
+ BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
+ BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+ BPF_LD_MAP_FD(BPF_REG_1, 0),
+ BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
+ BPF_FUNC_map_lookup_elem),
+ BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 8),
+ BPF_ST_MEM(BPF_DW, BPF_REG_10, -16, -8),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_1, BPF_REG_10, -16),
+ BPF_MOV64_IMM(BPF_REG_2, -1),
+ BPF_MOV64_IMM(BPF_REG_8, 2),
+ BPF_JMP_IMM(BPF_JEQ, BPF_REG_9, 42, 6),
+ BPF_JMP_REG(BPF_JSGT, BPF_REG_8, BPF_REG_1, 3),
+ BPF_JMP_IMM(BPF_JSGT, BPF_REG_1, 1, 2),
+ BPF_ALU64_REG(BPF_ADD, BPF_REG_0, BPF_REG_1),
+ BPF_ST_MEM(BPF_B, BPF_REG_0, 0, 0),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ BPF_JMP_REG(BPF_JGT, BPF_REG_1, BPF_REG_2, -3),
+ BPF_JMP_IMM(BPF_JA, 0, 0, -7),
+ },
+ .fixup_map1 = { 4 },
+ .errstr_unpriv = "R0 pointer arithmetic prohibited",
+ .errstr = "R0 min value is negative",
+ .result = REJECT,
+ .result_unpriv = REJECT,
+ },
+ {
+ "bounds checks mixing signed and unsigned, variant 16",
+ .insns = {
+ BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
+ BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+ BPF_LD_MAP_FD(BPF_REG_1, 0),
+ BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
+ BPF_FUNC_map_lookup_elem),
+ BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 4),
+ BPF_ST_MEM(BPF_DW, BPF_REG_10, -16, -8),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_1, BPF_REG_10, -16),
+ BPF_MOV64_IMM(BPF_REG_2, -6),
+ BPF_JMP_REG(BPF_JGE, BPF_REG_2, BPF_REG_1, 2),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ BPF_ALU64_REG(BPF_ADD, BPF_REG_0, BPF_REG_1),
+ BPF_JMP_IMM(BPF_JGT, BPF_REG_0, 1, 2),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ BPF_ST_MEM(BPF_B, BPF_REG_0, 0, 0),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .fixup_map1 = { 3 },
+ .errstr_unpriv = "R0 pointer arithmetic prohibited",
+ .errstr = "R0 min value is negative",
+ .result = REJECT,
+ .result_unpriv = REJECT,
+ },
+ {
+ "subtraction bounds (map value)",
+ .insns = {
+ BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
+ BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+ BPF_LD_MAP_FD(BPF_REG_1, 0),
+ BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
+ BPF_FUNC_map_lookup_elem),
+ BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 9),
+ BPF_LDX_MEM(BPF_B, BPF_REG_1, BPF_REG_0, 0),
+ BPF_JMP_IMM(BPF_JGT, BPF_REG_1, 0xff, 7),
+ BPF_LDX_MEM(BPF_B, BPF_REG_3, BPF_REG_0, 1),
+ BPF_JMP_IMM(BPF_JGT, BPF_REG_3, 0xff, 5),
+ BPF_ALU64_REG(BPF_SUB, BPF_REG_1, BPF_REG_3),
+ BPF_ALU64_IMM(BPF_RSH, BPF_REG_1, 56),
+ BPF_ALU64_REG(BPF_ADD, BPF_REG_0, BPF_REG_1),
+ BPF_LDX_MEM(BPF_B, BPF_REG_0, BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .fixup_map1 = { 3 },
+ .errstr_unpriv = "R0 pointer arithmetic prohibited",
+ .errstr = "R0 min value is negative, either use unsigned index or do a if (index >=0) check.",
+ .result = REJECT,
+ .result_unpriv = REJECT,
+ },
};
static int probe_filter_length(const struct bpf_insn *fp)
@@ -5633,7 +6131,7 @@
fd_prog = bpf_verify_program(prog_type ? : BPF_PROG_TYPE_SOCKET_FILTER,
prog, prog_len, test->flags & F_LOAD_WITH_STRICT_ALIGNMENT,
- "GPL", 0, bpf_vlog, sizeof(bpf_vlog));
+ "GPL", 0, bpf_vlog, sizeof(bpf_vlog), 1);
expected_ret = unpriv && test->result_unpriv != UNDEF ?
test->result_unpriv : test->result;
diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_eventname.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_eventname.tc
new file mode 100644
index 0000000..b9302cc
--- /dev/null
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_eventname.tc
@@ -0,0 +1,36 @@
+#!/bin/sh
+# description: Kprobe event auto/manual naming
+
+[ -f kprobe_events ] || exit_unsupported # this is configurable
+
+disable_events
+echo > kprobe_events
+
+:;: "Add an event on function without name" ;:
+
+FUNC=`grep " [tT] .*vfs_read$" /proc/kallsyms | tail -n 1 | cut -f 3 -d " "`
+[ "x" != "x$FUNC" ] || exit_unresolved
+echo "p $FUNC" > kprobe_events
+PROBE_NAME=`echo $FUNC | tr ".:" "_"`
+test -d events/kprobes/p_${PROBE_NAME}_0 || exit_failure
+
+:;: "Add an event on function with new name" ;:
+
+echo "p:event1 $FUNC" > kprobe_events
+test -d events/kprobes/event1 || exit_failure
+
+:;: "Add an event on function with new name and group" ;:
+
+echo "p:kprobes2/event2 $FUNC" > kprobe_events
+test -d events/kprobes2/event2 || exit_failure
+
+:;: "Add an event on dot function without name" ;:
+
+FUNC=`grep -m 10 " [tT] .*\.isra\..*$" /proc/kallsyms | tail -n 1 | cut -f 3 -d " "`
+[ "x" != "x$FUNC" ] || exit_unresolved
+echo "p $FUNC" > kprobe_events
+EVENT=`grep $FUNC kprobe_events | cut -f 1 -d " " | cut -f 2 -d:`
+[ "x" != "x$EVENT" ] || exit_failure
+test -d events/$EVENT || exit_failure
+
+echo > kprobe_events
diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_module.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_module.tc
new file mode 100644
index 0000000..6d634e4
--- /dev/null
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_module.tc
@@ -0,0 +1,28 @@
+#!/bin/sh
+# description: Kprobe dynamic event - probing module
+
+[ -f kprobe_events ] || exit_unsupported # this is configurable
+
+disable_events
+echo > kprobe_events
+
+:;: "Add an event on a module function without specifying event name" ;:
+
+MOD=`lsmod | head -n 2 | tail -n 1 | cut -f1 -d" "`
+FUNC=`grep -m 1 ".* t .*\\[$MOD\\]" /proc/kallsyms | xargs | cut -f3 -d" "`
+[ "x" != "x$MOD" -a "y" != "y$FUNC" ] || exit_unresolved
+echo "p $MOD:$FUNC" > kprobe_events
+PROBE_NAME=`echo $MOD:$FUNC | tr ".:" "_"`
+test -d events/kprobes/p_${PROBE_NAME}_0 || exit_failure
+
+:;: "Add an event on a module function with new event name" ;:
+
+echo "p:event1 $MOD:$FUNC" > kprobe_events
+test -d events/kprobes/event1 || exit_failure
+
+:;: "Add an event on a module function with new event and group name" ;:
+
+echo "p:kprobes1/event1 $MOD:$FUNC" > kprobe_events
+test -d events/kprobes1/event1 || exit_failure
+
+echo > kprobe_events
diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/multiple_kprobes.tc b/tools/testing/selftests/ftrace/test.d/kprobe/multiple_kprobes.tc
index f4d1ff7..2a1cb99 100644
--- a/tools/testing/selftests/ftrace/test.d/kprobe/multiple_kprobes.tc
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/multiple_kprobes.tc
@@ -2,10 +2,10 @@
# description: Register/unregister many kprobe events
# ftrace fentry skip size depends on the machine architecture.
-# Currently HAVE_KPROBES_ON_FTRACE defined on x86 and powerpc
+# Currently HAVE_KPROBES_ON_FTRACE defined on x86 and powerpc64le
case `uname -m` in
x86_64|i[3456]86) OFFS=5;;
- ppc*) OFFS=4;;
+ ppc64le) OFFS=8;;
*) OFFS=0;;
esac
diff --git a/tools/testing/selftests/kmod/Makefile b/tools/testing/selftests/kmod/Makefile
new file mode 100644
index 0000000..fa2ccc5
--- /dev/null
+++ b/tools/testing/selftests/kmod/Makefile
@@ -0,0 +1,11 @@
+# Makefile for kmod loading selftests
+
+# No binaries, but make sure arg-less "make" doesn't trigger "run_tests"
+all:
+
+TEST_PROGS := kmod.sh
+
+include ../lib.mk
+
+# Nothing to clean up.
+clean:
diff --git a/tools/testing/selftests/kmod/config b/tools/testing/selftests/kmod/config
new file mode 100644
index 0000000..259f4fd
--- /dev/null
+++ b/tools/testing/selftests/kmod/config
@@ -0,0 +1,7 @@
+CONFIG_TEST_KMOD=m
+CONFIG_TEST_LKM=m
+CONFIG_XFS_FS=m
+
+# For the module parameter force_init_test is used
+CONFIG_TUN=m
+CONFIG_BTRFS_FS=m
diff --git a/tools/testing/selftests/kmod/kmod.sh b/tools/testing/selftests/kmod/kmod.sh
new file mode 100644
index 0000000..8cecae9
--- /dev/null
+++ b/tools/testing/selftests/kmod/kmod.sh
@@ -0,0 +1,615 @@
+#!/bin/bash
+#
+# Copyright (C) 2017 Luis R. Rodriguez <mcgrof@kernel.org>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the Free
+# Software Foundation; either version 2 of the License, or at your option any
+# later version; or, when distributed separately from the Linux kernel or
+# when incorporated into other software packages, subject to the following
+# license:
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of copyleft-next (version 0.3.1 or later) as published
+# at http://copyleft-next.org/.
+
+# This is a stress test script for kmod, the kernel module loader. It uses
+# test_kmod which exposes a series of knobs for the API for us so we can
+# tweak each test in userspace rather than in kernelspace.
+#
+# The way kmod works is it uses the kernel's usermode helper API to eventually
+# call /sbin/modprobe. It has a limit of the number of concurrent calls
+# possible. The kernel interface to load modules is request_module(), however
+# mount uses get_fs_type(). Both behave slightly differently, but the
+# differences are important enough to test each call separately. For this
+# reason test_kmod starts by providing tests for both calls.
+#
+# The test driver test_kmod assumes a series of defaults which you can
+# override by exporting to your environment prior running this script.
+# For instance this script assumes you do not have xfs loaded upon boot.
+# If this is false, export DEFAULT_KMOD_FS="ext4" prior to running this
+# script if the filesyste module you don't have loaded upon bootup
+# is ext4 instead. Refer to allow_user_defaults() for a list of user
+# override variables possible.
+#
+# You'll want at least 4 GiB of RAM to expect to run these tests
+# without running out of memory on them. For other requirements refer
+# to test_reqs()
+
+set -e
+
+TEST_NAME="kmod"
+TEST_DRIVER="test_${TEST_NAME}"
+TEST_DIR=$(dirname $0)
+
+# This represents
+#
+# TEST_ID:TEST_COUNT:ENABLED
+#
+# TEST_ID: is the test id number
+# TEST_COUNT: number of times we should run the test
+# ENABLED: 1 if enabled, 0 otherwise
+#
+# Once these are enabled please leave them as-is. Write your own test,
+# we have tons of space.
+ALL_TESTS="0001:3:1"
+ALL_TESTS="$ALL_TESTS 0002:3:1"
+ALL_TESTS="$ALL_TESTS 0003:1:1"
+ALL_TESTS="$ALL_TESTS 0004:1:1"
+ALL_TESTS="$ALL_TESTS 0005:10:1"
+ALL_TESTS="$ALL_TESTS 0006:10:1"
+ALL_TESTS="$ALL_TESTS 0007:5:1"
+ALL_TESTS="$ALL_TESTS 0008:150:1"
+ALL_TESTS="$ALL_TESTS 0009:150:1"
+
+test_modprobe()
+{
+ if [ ! -d $DIR ]; then
+ echo "$0: $DIR not present" >&2
+ echo "You must have the following enabled in your kernel:" >&2
+ cat $TEST_DIR/config >&2
+ exit 1
+ fi
+}
+
+function allow_user_defaults()
+{
+ if [ -z $DEFAULT_KMOD_DRIVER ]; then
+ DEFAULT_KMOD_DRIVER="test_module"
+ fi
+
+ if [ -z $DEFAULT_KMOD_FS ]; then
+ DEFAULT_KMOD_FS="xfs"
+ fi
+
+ if [ -z $PROC_DIR ]; then
+ PROC_DIR="/proc/sys/kernel/"
+ fi
+
+ if [ -z $MODPROBE_LIMIT ]; then
+ MODPROBE_LIMIT=50
+ fi
+
+ if [ -z $DIR ]; then
+ DIR="/sys/devices/virtual/misc/${TEST_DRIVER}0/"
+ fi
+
+ if [ -z $DEFAULT_NUM_TESTS ]; then
+ DEFAULT_NUM_TESTS=150
+ fi
+
+ MODPROBE_LIMIT_FILE="${PROC_DIR}/kmod-limit"
+}
+
+test_reqs()
+{
+ if ! which modprobe 2> /dev/null > /dev/null; then
+ echo "$0: You need modprobe installed" >&2
+ exit 1
+ fi
+
+ if ! which kmod 2> /dev/null > /dev/null; then
+ echo "$0: You need kmod installed" >&2
+ exit 1
+ fi
+
+ # kmod 19 has a bad bug where it returns 0 when modprobe
+ # gets called *even* if the module was not loaded due to
+ # some bad heuristics. For details see:
+ #
+ # A work around is possible in-kernel but its rather
+ # complex.
+ KMOD_VERSION=$(kmod --version | awk '{print $3}')
+ if [[ $KMOD_VERSION -le 19 ]]; then
+ echo "$0: You need at least kmod 20" >&2
+ echo "kmod <= 19 is buggy, for details see:" >&2
+ echo "http://git.kernel.org/cgit/utils/kernel/kmod/kmod.git/commit/libkmod/libkmod-module.c?id=fd44a98ae2eb5eb32161088954ab21e58e19dfc4" >&2
+ exit 1
+ fi
+
+ uid=$(id -u)
+ if [ $uid -ne 0 ]; then
+ echo $msg must be run as root >&2
+ exit 0
+ fi
+}
+
+function load_req_mod()
+{
+ trap "test_modprobe" EXIT
+
+ if [ ! -d $DIR ]; then
+ # Alanis: "Oh isn't it ironic?"
+ modprobe $TEST_DRIVER
+ fi
+}
+
+test_finish()
+{
+ echo "Test completed"
+}
+
+errno_name_to_val()
+{
+ case "$1" in
+ # kmod calls modprobe and upon of a module not found
+ # modprobe returns just 1... However in the kernel we
+ # *sometimes* see 256...
+ MODULE_NOT_FOUND)
+ echo 256;;
+ SUCCESS)
+ echo 0;;
+ -EPERM)
+ echo -1;;
+ -ENOENT)
+ echo -2;;
+ -EINVAL)
+ echo -22;;
+ -ERR_ANY)
+ echo -123456;;
+ *)
+ echo invalid;;
+ esac
+}
+
+errno_val_to_name()
+ case "$1" in
+ 256)
+ echo MODULE_NOT_FOUND;;
+ 0)
+ echo SUCCESS;;
+ -1)
+ echo -EPERM;;
+ -2)
+ echo -ENOENT;;
+ -22)
+ echo -EINVAL;;
+ -123456)
+ echo -ERR_ANY;;
+ *)
+ echo invalid;;
+ esac
+
+config_set_test_case_driver()
+{
+ if ! echo -n 1 >$DIR/config_test_case; then
+ echo "$0: Unable to set to test case to driver" >&2
+ exit 1
+ fi
+}
+
+config_set_test_case_fs()
+{
+ if ! echo -n 2 >$DIR/config_test_case; then
+ echo "$0: Unable to set to test case to fs" >&2
+ exit 1
+ fi
+}
+
+config_num_threads()
+{
+ if ! echo -n $1 >$DIR/config_num_threads; then
+ echo "$0: Unable to set to number of threads" >&2
+ exit 1
+ fi
+}
+
+config_get_modprobe_limit()
+{
+ if [[ -f ${MODPROBE_LIMIT_FILE} ]] ; then
+ MODPROBE_LIMIT=$(cat $MODPROBE_LIMIT_FILE)
+ fi
+ echo $MODPROBE_LIMIT
+}
+
+config_num_thread_limit_extra()
+{
+ MODPROBE_LIMIT=$(config_get_modprobe_limit)
+ let EXTRA_LIMIT=$MODPROBE_LIMIT+$1
+ config_num_threads $EXTRA_LIMIT
+}
+
+# For special characters use printf directly,
+# refer to kmod_test_0001
+config_set_driver()
+{
+ if ! echo -n $1 >$DIR/config_test_driver; then
+ echo "$0: Unable to set driver" >&2
+ exit 1
+ fi
+}
+
+config_set_fs()
+{
+ if ! echo -n $1 >$DIR/config_test_fs; then
+ echo "$0: Unable to set driver" >&2
+ exit 1
+ fi
+}
+
+config_get_driver()
+{
+ cat $DIR/config_test_driver
+}
+
+config_get_test_result()
+{
+ cat $DIR/test_result
+}
+
+config_reset()
+{
+ if ! echo -n "1" >"$DIR"/reset; then
+ echo "$0: reset shuld have worked" >&2
+ exit 1
+ fi
+}
+
+config_show_config()
+{
+ echo "----------------------------------------------------"
+ cat "$DIR"/config
+ echo "----------------------------------------------------"
+}
+
+config_trigger()
+{
+ if ! echo -n "1" >"$DIR"/trigger_config 2>/dev/null; then
+ echo "$1: FAIL - loading should have worked"
+ config_show_config
+ exit 1
+ fi
+ echo "$1: OK! - loading kmod test"
+}
+
+config_trigger_want_fail()
+{
+ if echo "1" > $DIR/trigger_config 2>/dev/null; then
+ echo "$1: FAIL - test case was expected to fail"
+ config_show_config
+ exit 1
+ fi
+ echo "$1: OK! - kmod test case failed as expected"
+}
+
+config_expect_result()
+{
+ RC=$(config_get_test_result)
+ RC_NAME=$(errno_val_to_name $RC)
+
+ ERRNO_NAME=$2
+ ERRNO=$(errno_name_to_val $ERRNO_NAME)
+
+ if [[ $ERRNO_NAME = "-ERR_ANY" ]]; then
+ if [[ $RC -ge 0 ]]; then
+ echo "$1: FAIL, test expects $ERRNO_NAME - got $RC_NAME ($RC)" >&2
+ config_show_config
+ exit 1
+ fi
+ elif [[ $RC != $ERRNO ]]; then
+ echo "$1: FAIL, test expects $ERRNO_NAME ($ERRNO) - got $RC_NAME ($RC)" >&2
+ config_show_config
+ exit 1
+ fi
+ echo "$1: OK! - Return value: $RC ($RC_NAME), expected $ERRNO_NAME"
+}
+
+kmod_defaults_driver()
+{
+ config_reset
+ modprobe -r $DEFAULT_KMOD_DRIVER
+ config_set_driver $DEFAULT_KMOD_DRIVER
+}
+
+kmod_defaults_fs()
+{
+ config_reset
+ modprobe -r $DEFAULT_KMOD_FS
+ config_set_fs $DEFAULT_KMOD_FS
+ config_set_test_case_fs
+}
+
+kmod_test_0001_driver()
+{
+ NAME='\000'
+
+ kmod_defaults_driver
+ config_num_threads 1
+ printf '\000' >"$DIR"/config_test_driver
+ config_trigger ${FUNCNAME[0]}
+ config_expect_result ${FUNCNAME[0]} MODULE_NOT_FOUND
+}
+
+kmod_test_0001_fs()
+{
+ NAME='\000'
+
+ kmod_defaults_fs
+ config_num_threads 1
+ printf '\000' >"$DIR"/config_test_fs
+ config_trigger ${FUNCNAME[0]}
+ config_expect_result ${FUNCNAME[0]} -EINVAL
+}
+
+kmod_test_0001()
+{
+ kmod_test_0001_driver
+ kmod_test_0001_fs
+}
+
+kmod_test_0002_driver()
+{
+ NAME="nope-$DEFAULT_KMOD_DRIVER"
+
+ kmod_defaults_driver
+ config_set_driver $NAME
+ config_num_threads 1
+ config_trigger ${FUNCNAME[0]}
+ config_expect_result ${FUNCNAME[0]} MODULE_NOT_FOUND
+}
+
+kmod_test_0002_fs()
+{
+ NAME="nope-$DEFAULT_KMOD_FS"
+
+ kmod_defaults_fs
+ config_set_fs $NAME
+ config_trigger ${FUNCNAME[0]}
+ config_expect_result ${FUNCNAME[0]} -EINVAL
+}
+
+kmod_test_0002()
+{
+ kmod_test_0002_driver
+ kmod_test_0002_fs
+}
+
+kmod_test_0003()
+{
+ kmod_defaults_fs
+ config_num_threads 1
+ config_trigger ${FUNCNAME[0]}
+ config_expect_result ${FUNCNAME[0]} SUCCESS
+}
+
+kmod_test_0004()
+{
+ kmod_defaults_fs
+ config_num_threads 2
+ config_trigger ${FUNCNAME[0]}
+ config_expect_result ${FUNCNAME[0]} SUCCESS
+}
+
+kmod_test_0005()
+{
+ kmod_defaults_driver
+ config_trigger ${FUNCNAME[0]}
+ config_expect_result ${FUNCNAME[0]} SUCCESS
+}
+
+kmod_test_0006()
+{
+ kmod_defaults_fs
+ config_trigger ${FUNCNAME[0]}
+ config_expect_result ${FUNCNAME[0]} SUCCESS
+}
+
+kmod_test_0007()
+{
+ kmod_test_0005
+ kmod_test_0006
+}
+
+kmod_test_0008()
+{
+ kmod_defaults_driver
+ MODPROBE_LIMIT=$(config_get_modprobe_limit)
+ let EXTRA=$MODPROBE_LIMIT/6
+ config_num_thread_limit_extra $EXTRA
+ config_trigger ${FUNCNAME[0]}
+ config_expect_result ${FUNCNAME[0]} SUCCESS
+}
+
+kmod_test_0009()
+{
+ kmod_defaults_fs
+ MODPROBE_LIMIT=$(config_get_modprobe_limit)
+ let EXTRA=$MODPROBE_LIMIT/4
+ config_num_thread_limit_extra $EXTRA
+ config_trigger ${FUNCNAME[0]}
+ config_expect_result ${FUNCNAME[0]} SUCCESS
+}
+
+list_tests()
+{
+ echo "Test ID list:"
+ echo
+ echo "TEST_ID x NUM_TEST"
+ echo "TEST_ID: Test ID"
+ echo "NUM_TESTS: Number of recommended times to run the test"
+ echo
+ echo "0001 x $(get_test_count 0001) - Simple test - 1 thread for empty string"
+ echo "0002 x $(get_test_count 0002) - Simple test - 1 thread for modules/filesystems that do not exist"
+ echo "0003 x $(get_test_count 0003) - Simple test - 1 thread for get_fs_type() only"
+ echo "0004 x $(get_test_count 0004) - Simple test - 2 threads for get_fs_type() only"
+ echo "0005 x $(get_test_count 0005) - multithreaded tests with default setup - request_module() only"
+ echo "0006 x $(get_test_count 0006) - multithreaded tests with default setup - get_fs_type() only"
+ echo "0007 x $(get_test_count 0007) - multithreaded tests with default setup test request_module() and get_fs_type()"
+ echo "0008 x $(get_test_count 0008) - multithreaded - push kmod_concurrent over max_modprobes for request_module()"
+ echo "0009 x $(get_test_count 0009) - multithreaded - push kmod_concurrent over max_modprobes for get_fs_type()"
+}
+
+usage()
+{
+ NUM_TESTS=$(grep -o ' ' <<<"$ALL_TESTS" | grep -c .)
+ let NUM_TESTS=$NUM_TESTS+1
+ MAX_TEST=$(printf "%04d\n" $NUM_TESTS)
+ echo "Usage: $0 [ -t <4-number-digit> ] | [ -w <4-number-digit> ] |"
+ echo " [ -s <4-number-digit> ] | [ -c <4-number-digit> <test- count>"
+ echo " [ all ] [ -h | --help ] [ -l ]"
+ echo ""
+ echo "Valid tests: 0001-$MAX_TEST"
+ echo ""
+ echo " all Runs all tests (default)"
+ echo " -t Run test ID the number amount of times is recommended"
+ echo " -w Watch test ID run until it runs into an error"
+ echo " -c Run test ID once"
+ echo " -s Run test ID x test-count number of times"
+ echo " -l List all test ID list"
+ echo " -h|--help Help"
+ echo
+ echo "If an error every occurs execution will immediately terminate."
+ echo "If you are adding a new test try using -w <test-ID> first to"
+ echo "make sure the test passes a series of tests."
+ echo
+ echo Example uses:
+ echo
+ echo "${TEST_NAME}.sh -- executes all tests"
+ echo "${TEST_NAME}.sh -t 0008 -- Executes test ID 0008 number of times is recomended"
+ echo "${TEST_NAME}.sh -w 0008 -- Watch test ID 0008 run until an error occurs"
+ echo "${TEST_NAME}.sh -s 0008 -- Run test ID 0008 once"
+ echo "${TEST_NAME}.sh -c 0008 3 -- Run test ID 0008 three times"
+ echo
+ list_tests
+ exit 1
+}
+
+function test_num()
+{
+ re='^[0-9]+$'
+ if ! [[ $1 =~ $re ]]; then
+ usage
+ fi
+}
+
+function get_test_count()
+{
+ test_num $1
+ TEST_DATA=$(echo $ALL_TESTS | awk '{print $'$1'}')
+ LAST_TWO=${TEST_DATA#*:*}
+ echo ${LAST_TWO%:*}
+}
+
+function get_test_enabled()
+{
+ test_num $1
+ TEST_DATA=$(echo $ALL_TESTS | awk '{print $'$1'}')
+ echo ${TEST_DATA#*:*:}
+}
+
+function run_all_tests()
+{
+ for i in $ALL_TESTS ; do
+ TEST_ID=${i%:*:*}
+ ENABLED=$(get_test_enabled $TEST_ID)
+ TEST_COUNT=$(get_test_count $TEST_ID)
+ if [[ $ENABLED -eq "1" ]]; then
+ test_case $TEST_ID $TEST_COUNT
+ fi
+ done
+}
+
+function watch_log()
+{
+ if [ $# -ne 3 ]; then
+ clear
+ fi
+ date
+ echo "Running test: $2 - run #$1"
+}
+
+function watch_case()
+{
+ i=0
+ while [ 1 ]; do
+
+ if [ $# -eq 1 ]; then
+ test_num $1
+ watch_log $i ${TEST_NAME}_test_$1
+ ${TEST_NAME}_test_$1
+ else
+ watch_log $i all
+ run_all_tests
+ fi
+ let i=$i+1
+ done
+}
+
+function test_case()
+{
+ NUM_TESTS=$DEFAULT_NUM_TESTS
+ if [ $# -eq 2 ]; then
+ NUM_TESTS=$2
+ fi
+
+ i=0
+ while [ $i -lt $NUM_TESTS ]; do
+ test_num $1
+ watch_log $i ${TEST_NAME}_test_$1 noclear
+ RUN_TEST=${TEST_NAME}_test_$1
+ $RUN_TEST
+ let i=$i+1
+ done
+}
+
+function parse_args()
+{
+ if [ $# -eq 0 ]; then
+ run_all_tests
+ else
+ if [[ "$1" = "all" ]]; then
+ run_all_tests
+ elif [[ "$1" = "-w" ]]; then
+ shift
+ watch_case $@
+ elif [[ "$1" = "-t" ]]; then
+ shift
+ test_num $1
+ test_case $1 $(get_test_count $1)
+ elif [[ "$1" = "-c" ]]; then
+ shift
+ test_num $1
+ test_num $2
+ test_case $1 $2
+ elif [[ "$1" = "-s" ]]; then
+ shift
+ test_case $1 1
+ elif [[ "$1" = "-l" ]]; then
+ list_tests
+ elif [[ "$1" = "-h" || "$1" = "--help" ]]; then
+ usage
+ else
+ usage
+ fi
+ fi
+}
+
+test_reqs
+allow_user_defaults
+load_req_mod
+
+trap "test_finish" EXIT
+
+parse_args $@
+
+exit 0
diff --git a/tools/testing/selftests/ntb/ntb_test.sh b/tools/testing/selftests/ntb/ntb_test.sh
index 13f5198..1c12b58 100755
--- a/tools/testing/selftests/ntb/ntb_test.sh
+++ b/tools/testing/selftests/ntb/ntb_test.sh
@@ -18,6 +18,7 @@
DEBUGFS=${DEBUGFS-/sys/kernel/debug}
+DB_BITMASK=0x7FFF
PERF_RUN_ORDER=32
MAX_MW_SIZE=0
RUN_DMA_TESTS=
@@ -38,6 +39,7 @@
echo "be highly recommended."
echo
echo "Options:"
+ echo " -b BITMASK doorbell clear bitmask for ntb_tool"
echo " -C don't cleanup ntb modules on exit"
echo " -d run dma tests"
echo " -h show this help message"
@@ -52,8 +54,9 @@
function parse_args()
{
OPTIND=0
- while getopts "Cdhlm:r:p:w:" opt; do
+ while getopts "b:Cdhlm:r:p:w:" opt; do
case "$opt" in
+ b) DB_BITMASK=${OPTARG} ;;
C) DONT_CLEANUP=1 ;;
d) RUN_DMA_TESTS=1 ;;
h) show_help; exit 0 ;;
@@ -85,6 +88,10 @@
function _modprobe()
{
modprobe "$@"
+
+ if [[ "$REMOTE_HOST" != "" ]]; then
+ ssh "$REMOTE_HOST" modprobe "$@"
+ fi
}
function split_remote()
@@ -154,7 +161,7 @@
echo "Running db tests on: $(basename $LOC) / $(basename $REM)"
- write_file "c 0xFFFFFFFF" "$REM/db"
+ write_file "c $DB_BITMASK" "$REM/db"
for ((i=1; i <= 8; i++)); do
let DB=$(read_file "$REM/db") || true
diff --git a/tools/testing/selftests/sysctl/Makefile b/tools/testing/selftests/sysctl/Makefile
index b3c33e0..95c320b 100644
--- a/tools/testing/selftests/sysctl/Makefile
+++ b/tools/testing/selftests/sysctl/Makefile
@@ -4,8 +4,7 @@
# No binaries, but make sure arg-less "make" doesn't trigger "run_tests".
all:
-TEST_PROGS := run_numerictests run_stringtests
-TEST_FILES := common_tests
+TEST_PROGS := sysctl.sh
include ../lib.mk
diff --git a/tools/testing/selftests/sysctl/common_tests b/tools/testing/selftests/sysctl/common_tests
deleted file mode 100644
index b686232..0000000
--- a/tools/testing/selftests/sysctl/common_tests
+++ /dev/null
@@ -1,131 +0,0 @@
-#!/bin/sh
-
-TEST_FILE=$(mktemp)
-
-echo "== Testing sysctl behavior against ${TARGET} =="
-
-set_orig()
-{
- echo "${ORIG}" > "${TARGET}"
-}
-
-set_test()
-{
- echo "${TEST_STR}" > "${TARGET}"
-}
-
-verify()
-{
- local seen
- seen=$(cat "$1")
- if [ "${seen}" != "${TEST_STR}" ]; then
- return 1
- fi
- return 0
-}
-
-exit_test()
-{
- if [ ! -z ${old_strict} ]; then
- echo ${old_strict} > ${WRITES_STRICT}
- fi
- exit $rc
-}
-
-trap 'set_orig; rm -f "${TEST_FILE}"' EXIT
-
-rc=0
-
-echo -n "Writing test file ... "
-echo "${TEST_STR}" > "${TEST_FILE}"
-if ! verify "${TEST_FILE}"; then
- echo "FAIL" >&2
- exit 1
-else
- echo "ok"
-fi
-
-echo -n "Checking sysctl is not set to test value ... "
-if verify "${TARGET}"; then
- echo "FAIL" >&2
- exit 1
-else
- echo "ok"
-fi
-
-echo -n "Writing sysctl from shell ... "
-set_test
-if ! verify "${TARGET}"; then
- echo "FAIL" >&2
- exit 1
-else
- echo "ok"
-fi
-
-echo -n "Resetting sysctl to original value ... "
-set_orig
-if verify "${TARGET}"; then
- echo "FAIL" >&2
- exit 1
-else
- echo "ok"
-fi
-
-echo -n "Checking write strict setting ... "
-WRITES_STRICT="${SYSCTL}/kernel/sysctl_writes_strict"
-if [ ! -e ${WRITES_STRICT} ]; then
- echo "FAIL, but skip in case of old kernel" >&2
-else
- old_strict=$(cat ${WRITES_STRICT})
- if [ "$old_strict" = "1" ]; then
- echo "ok"
- else
- echo "FAIL, strict value is 0 but force to 1 to continue" >&2
- echo "1" > ${WRITES_STRICT}
- fi
-fi
-
-# Now that we've validated the sanity of "set_test" and "set_orig",
-# we can use those functions to set starting states before running
-# specific behavioral tests.
-
-echo -n "Writing entire sysctl in single write ... "
-set_orig
-dd if="${TEST_FILE}" of="${TARGET}" bs=4096 2>/dev/null
-if ! verify "${TARGET}"; then
- echo "FAIL" >&2
- rc=1
-else
- echo "ok"
-fi
-
-echo -n "Writing middle of sysctl after synchronized seek ... "
-set_test
-dd if="${TEST_FILE}" of="${TARGET}" bs=1 seek=1 skip=1 2>/dev/null
-if ! verify "${TARGET}"; then
- echo "FAIL" >&2
- rc=1
-else
- echo "ok"
-fi
-
-echo -n "Writing beyond end of sysctl ... "
-set_orig
-dd if="${TEST_FILE}" of="${TARGET}" bs=20 seek=2 2>/dev/null
-if verify "${TARGET}"; then
- echo "FAIL" >&2
- rc=1
-else
- echo "ok"
-fi
-
-echo -n "Writing sysctl with multiple long writes ... "
-set_orig
-(perl -e 'print "A" x 50;'; echo "${TEST_STR}") | \
- dd of="${TARGET}" bs=50 2>/dev/null
-if verify "${TARGET}"; then
- echo "FAIL" >&2
- rc=1
-else
- echo "ok"
-fi
diff --git a/tools/testing/selftests/sysctl/config b/tools/testing/selftests/sysctl/config
new file mode 100644
index 0000000..6ca1480
--- /dev/null
+++ b/tools/testing/selftests/sysctl/config
@@ -0,0 +1 @@
+CONFIG_TEST_SYSCTL=y
diff --git a/tools/testing/selftests/sysctl/run_numerictests b/tools/testing/selftests/sysctl/run_numerictests
deleted file mode 100755
index e6e76c9..0000000
--- a/tools/testing/selftests/sysctl/run_numerictests
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/sh
-
-SYSCTL="/proc/sys"
-TARGET="${SYSCTL}/vm/swappiness"
-ORIG=$(cat "${TARGET}")
-TEST_STR=$(( $ORIG + 1 ))
-
-. ./common_tests
-
-exit_test
diff --git a/tools/testing/selftests/sysctl/run_stringtests b/tools/testing/selftests/sysctl/run_stringtests
deleted file mode 100755
index 857ec66..0000000
--- a/tools/testing/selftests/sysctl/run_stringtests
+++ /dev/null
@@ -1,77 +0,0 @@
-#!/bin/sh
-
-SYSCTL="/proc/sys"
-TARGET="${SYSCTL}/kernel/domainname"
-ORIG=$(cat "${TARGET}")
-TEST_STR="Testing sysctl"
-
-. ./common_tests
-
-# Only string sysctls support seeking/appending.
-MAXLEN=65
-
-echo -n "Writing entire sysctl in short writes ... "
-set_orig
-dd if="${TEST_FILE}" of="${TARGET}" bs=1 2>/dev/null
-if ! verify "${TARGET}"; then
- echo "FAIL" >&2
- rc=1
-else
- echo "ok"
-fi
-
-echo -n "Writing middle of sysctl after unsynchronized seek ... "
-set_test
-dd if="${TEST_FILE}" of="${TARGET}" bs=1 seek=1 2>/dev/null
-if verify "${TARGET}"; then
- echo "FAIL" >&2
- rc=1
-else
- echo "ok"
-fi
-
-echo -n "Checking sysctl maxlen is at least $MAXLEN ... "
-set_orig
-perl -e 'print "A" x ('"${MAXLEN}"'-2), "B";' | \
- dd of="${TARGET}" bs="${MAXLEN}" 2>/dev/null
-if ! grep -q B "${TARGET}"; then
- echo "FAIL" >&2
- rc=1
-else
- echo "ok"
-fi
-
-echo -n "Checking sysctl keeps original string on overflow append ... "
-set_orig
-perl -e 'print "A" x ('"${MAXLEN}"'-1), "B";' | \
- dd of="${TARGET}" bs=$(( MAXLEN - 1 )) 2>/dev/null
-if grep -q B "${TARGET}"; then
- echo "FAIL" >&2
- rc=1
-else
- echo "ok"
-fi
-
-echo -n "Checking sysctl stays NULL terminated on write ... "
-set_orig
-perl -e 'print "A" x ('"${MAXLEN}"'-1), "B";' | \
- dd of="${TARGET}" bs="${MAXLEN}" 2>/dev/null
-if grep -q B "${TARGET}"; then
- echo "FAIL" >&2
- rc=1
-else
- echo "ok"
-fi
-
-echo -n "Checking sysctl stays NULL terminated on overwrite ... "
-set_orig
-perl -e 'print "A" x ('"${MAXLEN}"'-1), "BB";' | \
- dd of="${TARGET}" bs=$(( $MAXLEN + 1 )) 2>/dev/null
-if grep -q B "${TARGET}"; then
- echo "FAIL" >&2
- rc=1
-else
- echo "ok"
-fi
-
-exit_test
diff --git a/tools/testing/selftests/sysctl/sysctl.sh b/tools/testing/selftests/sysctl/sysctl.sh
new file mode 100644
index 0000000..ec232c3
--- /dev/null
+++ b/tools/testing/selftests/sysctl/sysctl.sh
@@ -0,0 +1,774 @@
+#!/bin/bash
+# Copyright (C) 2017 Luis R. Rodriguez <mcgrof@kernel.org>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the Free
+# Software Foundation; either version 2 of the License, or at your option any
+# later version; or, when distributed separately from the Linux kernel or
+# when incorporated into other software packages, subject to the following
+# license:
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of copyleft-next (version 0.3.1 or later) as published
+# at http://copyleft-next.org/.
+
+# This performs a series tests against the proc sysctl interface.
+
+TEST_NAME="sysctl"
+TEST_DRIVER="test_${TEST_NAME}"
+TEST_DIR=$(dirname $0)
+TEST_FILE=$(mktemp)
+
+# This represents
+#
+# TEST_ID:TEST_COUNT:ENABLED
+#
+# TEST_ID: is the test id number
+# TEST_COUNT: number of times we should run the test
+# ENABLED: 1 if enabled, 0 otherwise
+#
+# Once these are enabled please leave them as-is. Write your own test,
+# we have tons of space.
+ALL_TESTS="0001:1:1"
+ALL_TESTS="$ALL_TESTS 0002:1:1"
+ALL_TESTS="$ALL_TESTS 0003:1:1"
+ALL_TESTS="$ALL_TESTS 0004:1:1"
+ALL_TESTS="$ALL_TESTS 0005:3:1"
+
+test_modprobe()
+{
+ if [ ! -d $DIR ]; then
+ echo "$0: $DIR not present" >&2
+ echo "You must have the following enabled in your kernel:" >&2
+ cat $TEST_DIR/config >&2
+ exit 1
+ fi
+}
+
+function allow_user_defaults()
+{
+ if [ -z $DIR ]; then
+ DIR="/sys/module/test_sysctl/"
+ fi
+ if [ -z $DEFAULT_NUM_TESTS ]; then
+ DEFAULT_NUM_TESTS=50
+ fi
+ if [ -z $SYSCTL ]; then
+ SYSCTL="/proc/sys/debug/test_sysctl"
+ fi
+ if [ -z $PROD_SYSCTL ]; then
+ PROD_SYSCTL="/proc/sys"
+ fi
+ if [ -z $WRITES_STRICT ]; then
+ WRITES_STRICT="${PROD_SYSCTL}/kernel/sysctl_writes_strict"
+ fi
+}
+
+function check_production_sysctl_writes_strict()
+{
+ echo -n "Checking production write strict setting ... "
+ if [ ! -e ${WRITES_STRICT} ]; then
+ echo "FAIL, but skip in case of old kernel" >&2
+ else
+ old_strict=$(cat ${WRITES_STRICT})
+ if [ "$old_strict" = "1" ]; then
+ echo "ok"
+ else
+ echo "FAIL, strict value is 0 but force to 1 to continue" >&2
+ echo "1" > ${WRITES_STRICT}
+ fi
+ fi
+
+ if [ -z $PAGE_SIZE ]; then
+ PAGE_SIZE=$(getconf PAGESIZE)
+ fi
+ if [ -z $MAX_DIGITS ]; then
+ MAX_DIGITS=$(($PAGE_SIZE/8))
+ fi
+ if [ -z $INT_MAX ]; then
+ INT_MAX=$(getconf INT_MAX)
+ fi
+ if [ -z $UINT_MAX ]; then
+ UINT_MAX=$(getconf UINT_MAX)
+ fi
+}
+
+test_reqs()
+{
+ uid=$(id -u)
+ if [ $uid -ne 0 ]; then
+ echo $msg must be run as root >&2
+ exit 0
+ fi
+
+ if ! which perl 2> /dev/null > /dev/null; then
+ echo "$0: You need perl installed"
+ exit 1
+ fi
+ if ! which getconf 2> /dev/null > /dev/null; then
+ echo "$0: You need getconf installed"
+ exit 1
+ fi
+ if ! which diff 2> /dev/null > /dev/null; then
+ echo "$0: You need diff installed"
+ exit 1
+ fi
+}
+
+function load_req_mod()
+{
+ trap "test_modprobe" EXIT
+
+ if [ ! -d $DIR ]; then
+ modprobe $TEST_DRIVER
+ if [ $? -ne 0 ]; then
+ exit
+ fi
+ fi
+}
+
+reset_vals()
+{
+ VAL=""
+ TRIGGER=$(basename ${TARGET})
+ case "$TRIGGER" in
+ int_0001)
+ VAL="60"
+ ;;
+ int_0002)
+ VAL="1"
+ ;;
+ uint_0001)
+ VAL="314"
+ ;;
+ string_0001)
+ VAL="(none)"
+ ;;
+ *)
+ ;;
+ esac
+ echo -n $VAL > $TARGET
+}
+
+set_orig()
+{
+ if [ ! -z $TARGET ]; then
+ echo "${ORIG}" > "${TARGET}"
+ fi
+}
+
+set_test()
+{
+ echo "${TEST_STR}" > "${TARGET}"
+}
+
+verify()
+{
+ local seen
+ seen=$(cat "$1")
+ if [ "${seen}" != "${TEST_STR}" ]; then
+ return 1
+ fi
+ return 0
+}
+
+verify_diff_w()
+{
+ echo "$TEST_STR" | diff -q -w -u - $1
+ return $?
+}
+
+test_rc()
+{
+ if [[ $rc != 0 ]]; then
+ echo "Failed test, return value: $rc" >&2
+ exit $rc
+ fi
+}
+
+test_finish()
+{
+ set_orig
+ rm -f "${TEST_FILE}"
+
+ if [ ! -z ${old_strict} ]; then
+ echo ${old_strict} > ${WRITES_STRICT}
+ fi
+ exit $rc
+}
+
+run_numerictests()
+{
+ echo "== Testing sysctl behavior against ${TARGET} =="
+
+ rc=0
+
+ echo -n "Writing test file ... "
+ echo "${TEST_STR}" > "${TEST_FILE}"
+ if ! verify "${TEST_FILE}"; then
+ echo "FAIL" >&2
+ exit 1
+ else
+ echo "ok"
+ fi
+
+ echo -n "Checking sysctl is not set to test value ... "
+ if verify "${TARGET}"; then
+ echo "FAIL" >&2
+ exit 1
+ else
+ echo "ok"
+ fi
+
+ echo -n "Writing sysctl from shell ... "
+ set_test
+ if ! verify "${TARGET}"; then
+ echo "FAIL" >&2
+ exit 1
+ else
+ echo "ok"
+ fi
+
+ echo -n "Resetting sysctl to original value ... "
+ set_orig
+ if verify "${TARGET}"; then
+ echo "FAIL" >&2
+ exit 1
+ else
+ echo "ok"
+ fi
+
+ # Now that we've validated the sanity of "set_test" and "set_orig",
+ # we can use those functions to set starting states before running
+ # specific behavioral tests.
+
+ echo -n "Writing entire sysctl in single write ... "
+ set_orig
+ dd if="${TEST_FILE}" of="${TARGET}" bs=4096 2>/dev/null
+ if ! verify "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+ else
+ echo "ok"
+ fi
+
+ echo -n "Writing middle of sysctl after synchronized seek ... "
+ set_test
+ dd if="${TEST_FILE}" of="${TARGET}" bs=1 seek=1 skip=1 2>/dev/null
+ if ! verify "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+ else
+ echo "ok"
+ fi
+
+ echo -n "Writing beyond end of sysctl ... "
+ set_orig
+ dd if="${TEST_FILE}" of="${TARGET}" bs=20 seek=2 2>/dev/null
+ if verify "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+ else
+ echo "ok"
+ fi
+
+ echo -n "Writing sysctl with multiple long writes ... "
+ set_orig
+ (perl -e 'print "A" x 50;'; echo "${TEST_STR}") | \
+ dd of="${TARGET}" bs=50 2>/dev/null
+ if verify "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+ else
+ echo "ok"
+ fi
+ test_rc
+}
+
+# Your test must accept digits 3 and 4 to use this
+run_limit_digit()
+{
+ echo -n "Checking ignoring spaces up to PAGE_SIZE works on write ..."
+ reset_vals
+
+ LIMIT=$((MAX_DIGITS -1))
+ TEST_STR="3"
+ (perl -e 'print " " x '$LIMIT';'; echo "${TEST_STR}") | \
+ dd of="${TARGET}" 2>/dev/null
+
+ if ! verify "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+ else
+ echo "ok"
+ fi
+ test_rc
+
+ echo -n "Checking passing PAGE_SIZE of spaces fails on write ..."
+ reset_vals
+
+ LIMIT=$((MAX_DIGITS))
+ TEST_STR="4"
+ (perl -e 'print " " x '$LIMIT';'; echo "${TEST_STR}") | \
+ dd of="${TARGET}" 2>/dev/null
+
+ if verify "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+ else
+ echo "ok"
+ fi
+ test_rc
+}
+
+# You are using an int
+run_limit_digit_int()
+{
+ echo -n "Testing INT_MAX works ..."
+ reset_vals
+ TEST_STR="$INT_MAX"
+ echo -n $TEST_STR > $TARGET
+
+ if ! verify "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+ else
+ echo "ok"
+ fi
+ test_rc
+
+ echo -n "Testing INT_MAX + 1 will fail as expected..."
+ reset_vals
+ let TEST_STR=$INT_MAX+1
+ echo -n $TEST_STR > $TARGET 2> /dev/null
+
+ if verify "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+ else
+ echo "ok"
+ fi
+ test_rc
+
+ echo -n "Testing negative values will work as expected..."
+ reset_vals
+ TEST_STR="-3"
+ echo -n $TEST_STR > $TARGET 2> /dev/null
+ if ! verify "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+ else
+ echo "ok"
+ fi
+ test_rc
+}
+
+# You used an int array
+run_limit_digit_int_array()
+{
+ echo -n "Testing array works as expected ... "
+ TEST_STR="4 3 2 1"
+ echo -n $TEST_STR > $TARGET
+
+ if ! verify_diff_w "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+ else
+ echo "ok"
+ fi
+ test_rc
+
+ echo -n "Testing skipping trailing array elements works ... "
+ # Do not reset_vals, carry on the values from the last test.
+ # If we only echo in two digits the last two are left intact
+ TEST_STR="100 101"
+ echo -n $TEST_STR > $TARGET
+ # After we echo in, to help diff we need to set on TEST_STR what
+ # we expect the result to be.
+ TEST_STR="100 101 2 1"
+
+ if ! verify_diff_w "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+ else
+ echo "ok"
+ fi
+ test_rc
+
+ echo -n "Testing PAGE_SIZE limit on array works ... "
+ # Do not reset_vals, carry on the values from the last test.
+ # Even if you use an int array, you are still restricted to
+ # MAX_DIGITS, this is a known limitation. Test limit works.
+ LIMIT=$((MAX_DIGITS -1))
+ TEST_STR="9"
+ (perl -e 'print " " x '$LIMIT';'; echo "${TEST_STR}") | \
+ dd of="${TARGET}" 2>/dev/null
+
+ TEST_STR="9 101 2 1"
+ if ! verify_diff_w "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+ else
+ echo "ok"
+ fi
+ test_rc
+
+ echo -n "Testing exceeding PAGE_SIZE limit fails as expected ... "
+ # Do not reset_vals, carry on the values from the last test.
+ # Now go over limit.
+ LIMIT=$((MAX_DIGITS))
+ TEST_STR="7"
+ (perl -e 'print " " x '$LIMIT';'; echo "${TEST_STR}") | \
+ dd of="${TARGET}" 2>/dev/null
+
+ TEST_STR="7 101 2 1"
+ if verify_diff_w "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+ else
+ echo "ok"
+ fi
+ test_rc
+}
+
+# You are using an unsigned int
+run_limit_digit_uint()
+{
+ echo -n "Testing UINT_MAX works ..."
+ reset_vals
+ TEST_STR="$UINT_MAX"
+ echo -n $TEST_STR > $TARGET
+
+ if ! verify "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+ else
+ echo "ok"
+ fi
+ test_rc
+
+ echo -n "Testing UINT_MAX + 1 will fail as expected..."
+ reset_vals
+ TEST_STR=$(($UINT_MAX+1))
+ echo -n $TEST_STR > $TARGET 2> /dev/null
+
+ if verify "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+ else
+ echo "ok"
+ fi
+ test_rc
+
+ echo -n "Testing negative values will not work as expected ..."
+ reset_vals
+ TEST_STR="-3"
+ echo -n $TEST_STR > $TARGET 2> /dev/null
+
+ if verify "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+ else
+ echo "ok"
+ fi
+ test_rc
+}
+
+run_stringtests()
+{
+ echo -n "Writing entire sysctl in short writes ... "
+ set_orig
+ dd if="${TEST_FILE}" of="${TARGET}" bs=1 2>/dev/null
+ if ! verify "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+ else
+ echo "ok"
+ fi
+
+ echo -n "Writing middle of sysctl after unsynchronized seek ... "
+ set_test
+ dd if="${TEST_FILE}" of="${TARGET}" bs=1 seek=1 2>/dev/null
+ if verify "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+ else
+ echo "ok"
+ fi
+
+ echo -n "Checking sysctl maxlen is at least $MAXLEN ... "
+ set_orig
+ perl -e 'print "A" x ('"${MAXLEN}"'-2), "B";' | \
+ dd of="${TARGET}" bs="${MAXLEN}" 2>/dev/null
+ if ! grep -q B "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+ else
+ echo "ok"
+ fi
+
+ echo -n "Checking sysctl keeps original string on overflow append ... "
+ set_orig
+ perl -e 'print "A" x ('"${MAXLEN}"'-1), "B";' | \
+ dd of="${TARGET}" bs=$(( MAXLEN - 1 )) 2>/dev/null
+ if grep -q B "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+ else
+ echo "ok"
+ fi
+
+ echo -n "Checking sysctl stays NULL terminated on write ... "
+ set_orig
+ perl -e 'print "A" x ('"${MAXLEN}"'-1), "B";' | \
+ dd of="${TARGET}" bs="${MAXLEN}" 2>/dev/null
+ if grep -q B "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+ else
+ echo "ok"
+ fi
+
+ echo -n "Checking sysctl stays NULL terminated on overwrite ... "
+ set_orig
+ perl -e 'print "A" x ('"${MAXLEN}"'-1), "BB";' | \
+ dd of="${TARGET}" bs=$(( $MAXLEN + 1 )) 2>/dev/null
+ if grep -q B "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+ else
+ echo "ok"
+ fi
+
+ test_rc
+}
+
+sysctl_test_0001()
+{
+ TARGET="${SYSCTL}/int_0001"
+ reset_vals
+ ORIG=$(cat "${TARGET}")
+ TEST_STR=$(( $ORIG + 1 ))
+
+ run_numerictests
+ run_limit_digit
+}
+
+sysctl_test_0002()
+{
+ TARGET="${SYSCTL}/string_0001"
+ reset_vals
+ ORIG=$(cat "${TARGET}")
+ TEST_STR="Testing sysctl"
+ # Only string sysctls support seeking/appending.
+ MAXLEN=65
+
+ run_numerictests
+ run_stringtests
+}
+
+sysctl_test_0003()
+{
+ TARGET="${SYSCTL}/int_0002"
+ reset_vals
+ ORIG=$(cat "${TARGET}")
+ TEST_STR=$(( $ORIG + 1 ))
+
+ run_numerictests
+ run_limit_digit
+ run_limit_digit_int
+}
+
+sysctl_test_0004()
+{
+ TARGET="${SYSCTL}/uint_0001"
+ reset_vals
+ ORIG=$(cat "${TARGET}")
+ TEST_STR=$(( $ORIG + 1 ))
+
+ run_numerictests
+ run_limit_digit
+ run_limit_digit_uint
+}
+
+sysctl_test_0005()
+{
+ TARGET="${SYSCTL}/int_0003"
+ reset_vals
+ ORIG=$(cat "${TARGET}")
+
+ run_limit_digit_int_array
+}
+
+list_tests()
+{
+ echo "Test ID list:"
+ echo
+ echo "TEST_ID x NUM_TEST"
+ echo "TEST_ID: Test ID"
+ echo "NUM_TESTS: Number of recommended times to run the test"
+ echo
+ echo "0001 x $(get_test_count 0001) - tests proc_dointvec_minmax()"
+ echo "0002 x $(get_test_count 0002) - tests proc_dostring()"
+ echo "0003 x $(get_test_count 0003) - tests proc_dointvec()"
+ echo "0004 x $(get_test_count 0004) - tests proc_douintvec()"
+ echo "0005 x $(get_test_count 0005) - tests proc_douintvec() array"
+}
+
+test_reqs
+
+usage()
+{
+ NUM_TESTS=$(grep -o ' ' <<<"$ALL_TESTS" | grep -c .)
+ let NUM_TESTS=$NUM_TESTS+1
+ MAX_TEST=$(printf "%04d\n" $NUM_TESTS)
+ echo "Usage: $0 [ -t <4-number-digit> ] | [ -w <4-number-digit> ] |"
+ echo " [ -s <4-number-digit> ] | [ -c <4-number-digit> <test- count>"
+ echo " [ all ] [ -h | --help ] [ -l ]"
+ echo ""
+ echo "Valid tests: 0001-$MAX_TEST"
+ echo ""
+ echo " all Runs all tests (default)"
+ echo " -t Run test ID the number amount of times is recommended"
+ echo " -w Watch test ID run until it runs into an error"
+ echo " -c Run test ID once"
+ echo " -s Run test ID x test-count number of times"
+ echo " -l List all test ID list"
+ echo " -h|--help Help"
+ echo
+ echo "If an error every occurs execution will immediately terminate."
+ echo "If you are adding a new test try using -w <test-ID> first to"
+ echo "make sure the test passes a series of tests."
+ echo
+ echo Example uses:
+ echo
+ echo "$TEST_NAME.sh -- executes all tests"
+ echo "$TEST_NAME.sh -t 0002 -- Executes test ID 0002 number of times is recomended"
+ echo "$TEST_NAME.sh -w 0002 -- Watch test ID 0002 run until an error occurs"
+ echo "$TEST_NAME.sh -s 0002 -- Run test ID 0002 once"
+ echo "$TEST_NAME.sh -c 0002 3 -- Run test ID 0002 three times"
+ echo
+ list_tests
+ exit 1
+}
+
+function test_num()
+{
+ re='^[0-9]+$'
+ if ! [[ $1 =~ $re ]]; then
+ usage
+ fi
+}
+
+function get_test_count()
+{
+ test_num $1
+ TEST_DATA=$(echo $ALL_TESTS | awk '{print $'$1'}')
+ LAST_TWO=${TEST_DATA#*:*}
+ echo ${LAST_TWO%:*}
+}
+
+function get_test_enabled()
+{
+ test_num $1
+ TEST_DATA=$(echo $ALL_TESTS | awk '{print $'$1'}')
+ echo ${TEST_DATA#*:*:}
+}
+
+function run_all_tests()
+{
+ for i in $ALL_TESTS ; do
+ TEST_ID=${i%:*:*}
+ ENABLED=$(get_test_enabled $TEST_ID)
+ TEST_COUNT=$(get_test_count $TEST_ID)
+ if [[ $ENABLED -eq "1" ]]; then
+ test_case $TEST_ID $TEST_COUNT
+ fi
+ done
+}
+
+function watch_log()
+{
+ if [ $# -ne 3 ]; then
+ clear
+ fi
+ date
+ echo "Running test: $2 - run #$1"
+}
+
+function watch_case()
+{
+ i=0
+ while [ 1 ]; do
+
+ if [ $# -eq 1 ]; then
+ test_num $1
+ watch_log $i ${TEST_NAME}_test_$1
+ ${TEST_NAME}_test_$1
+ else
+ watch_log $i all
+ run_all_tests
+ fi
+ let i=$i+1
+ done
+}
+
+function test_case()
+{
+ NUM_TESTS=$DEFAULT_NUM_TESTS
+ if [ $# -eq 2 ]; then
+ NUM_TESTS=$2
+ fi
+
+ i=0
+ while [ $i -lt $NUM_TESTS ]; do
+ test_num $1
+ watch_log $i ${TEST_NAME}_test_$1 noclear
+ RUN_TEST=${TEST_NAME}_test_$1
+ $RUN_TEST
+ let i=$i+1
+ done
+}
+
+function parse_args()
+{
+ if [ $# -eq 0 ]; then
+ run_all_tests
+ else
+ if [[ "$1" = "all" ]]; then
+ run_all_tests
+ elif [[ "$1" = "-w" ]]; then
+ shift
+ watch_case $@
+ elif [[ "$1" = "-t" ]]; then
+ shift
+ test_num $1
+ test_case $1 $(get_test_count $1)
+ elif [[ "$1" = "-c" ]]; then
+ shift
+ test_num $1
+ test_num $2
+ test_case $1 $2
+ elif [[ "$1" = "-s" ]]; then
+ shift
+ test_case $1 1
+ elif [[ "$1" = "-l" ]]; then
+ list_tests
+ elif [[ "$1" = "-h" || "$1" = "--help" ]]; then
+ usage
+ else
+ usage
+ fi
+ fi
+}
+
+test_reqs
+allow_user_defaults
+check_production_sysctl_writes_strict
+load_req_mod
+
+trap "test_finish" EXIT
+
+parse_args $@
+
+exit 0
diff --git a/tools/testing/selftests/timers/Makefile b/tools/testing/selftests/timers/Makefile
index 5801bbe..a9b8613 100644
--- a/tools/testing/selftests/timers/Makefile
+++ b/tools/testing/selftests/timers/Makefile
@@ -9,7 +9,7 @@
TEST_GEN_PROGS_EXTENDED = alarmtimer-suspend valid-adjtimex adjtick change_skew \
skew_consistency clocksource-switch freq-step leap-a-day \
- leapcrash set-tai set-2038 set-tz
+ leapcrash set-tai set-2038 set-tz rtctest_setdate
include ../lib.mk
diff --git a/tools/testing/selftests/timers/rtctest.c b/tools/testing/selftests/timers/rtctest.c
index 4230d30..f61170f 100644
--- a/tools/testing/selftests/timers/rtctest.c
+++ b/tools/testing/selftests/timers/rtctest.c
@@ -21,6 +21,9 @@
#include <stdlib.h>
#include <errno.h>
+#ifndef ARRAY_SIZE
+# define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+#endif
/*
* This expects the new RTC class driver framework, working with
@@ -29,23 +32,84 @@
*/
static const char default_rtc[] = "/dev/rtc0";
+static struct rtc_time cutoff_dates[] = {
+ {
+ .tm_year = 70, /* 1970 -1900 */
+ .tm_mday = 1,
+ },
+ /* signed time_t 19/01/2038 3:14:08 */
+ {
+ .tm_year = 138,
+ .tm_mday = 19,
+ },
+ {
+ .tm_year = 138,
+ .tm_mday = 20,
+ },
+ {
+ .tm_year = 199, /* 2099 -1900 */
+ .tm_mday = 1,
+ },
+ {
+ .tm_year = 200, /* 2100 -1900 */
+ .tm_mday = 1,
+ },
+ /* unsigned time_t 07/02/2106 7:28:15*/
+ {
+ .tm_year = 205,
+ .tm_mon = 1,
+ .tm_mday = 7,
+ },
+ {
+ .tm_year = 206,
+ .tm_mon = 1,
+ .tm_mday = 8,
+ },
+ /* signed time on 64bit in nanoseconds 12/04/2262 01:47:16*/
+ {
+ .tm_year = 362,
+ .tm_mon = 3,
+ .tm_mday = 12,
+ },
+ {
+ .tm_year = 362, /* 2262 -1900 */
+ .tm_mon = 3,
+ .tm_mday = 13,
+ },
+};
+
+static int compare_dates(struct rtc_time *a, struct rtc_time *b)
+{
+ if (a->tm_year != b->tm_year ||
+ a->tm_mon != b->tm_mon ||
+ a->tm_mday != b->tm_mday ||
+ a->tm_hour != b->tm_hour ||
+ a->tm_min != b->tm_min ||
+ ((b->tm_sec - a->tm_sec) > 1))
+ return 1;
+
+ return 0;
+}
int main(int argc, char **argv)
{
- int i, fd, retval, irqcount = 0;
+ int i, fd, retval, irqcount = 0, dangerous = 0;
unsigned long tmp, data;
struct rtc_time rtc_tm;
const char *rtc = default_rtc;
struct timeval start, end, diff;
switch (argc) {
+ case 3:
+ if (*argv[2] == 'd')
+ dangerous = 1;
case 2:
rtc = argv[1];
/* FALLTHROUGH */
case 1:
break;
default:
- fprintf(stderr, "usage: rtctest [rtcdev]\n");
+ fprintf(stderr, "usage: rtctest [rtcdev] [d]\n");
return 1;
}
@@ -202,7 +266,7 @@
/* not all RTCs support periodic IRQs */
if (errno == EINVAL) {
fprintf(stderr, "\nNo periodic IRQ support\n");
- goto done;
+ goto test_DATE;
}
perror("RTC_IRQP_READ ioctl");
exit(errno);
@@ -221,7 +285,7 @@
if (errno == EINVAL) {
fprintf(stderr,
"\n...Periodic IRQ rate is fixed\n");
- goto done;
+ goto test_DATE;
}
perror("RTC_IRQP_SET ioctl");
exit(errno);
@@ -269,6 +333,62 @@
}
}
+test_DATE:
+ if (!dangerous)
+ goto done;
+
+ fprintf(stderr, "\nTesting problematic dates\n");
+
+ for (i = 0; i < ARRAY_SIZE(cutoff_dates); i++) {
+ struct rtc_time current;
+
+ /* Write the new date in RTC */
+ retval = ioctl(fd, RTC_SET_TIME, &cutoff_dates[i]);
+ if (retval == -1) {
+ perror("RTC_SET_TIME ioctl");
+ close(fd);
+ exit(errno);
+ }
+
+ /* Read back */
+ retval = ioctl(fd, RTC_RD_TIME, ¤t);
+ if (retval == -1) {
+ perror("RTC_RD_TIME ioctl");
+ exit(errno);
+ }
+
+ if(compare_dates(&cutoff_dates[i], ¤t)) {
+ fprintf(stderr,"Setting date %d failed\n",
+ cutoff_dates[i].tm_year + 1900);
+ goto done;
+ }
+
+ cutoff_dates[i].tm_sec += 5;
+
+ /* Write the new alarm in RTC */
+ retval = ioctl(fd, RTC_ALM_SET, &cutoff_dates[i]);
+ if (retval == -1) {
+ perror("RTC_ALM_SET ioctl");
+ close(fd);
+ exit(errno);
+ }
+
+ /* Read back */
+ retval = ioctl(fd, RTC_ALM_READ, ¤t);
+ if (retval == -1) {
+ perror("RTC_ALM_READ ioctl");
+ exit(errno);
+ }
+
+ if(compare_dates(&cutoff_dates[i], ¤t)) {
+ fprintf(stderr,"Setting alarm %d failed\n",
+ cutoff_dates[i].tm_year + 1900);
+ goto done;
+ }
+
+ fprintf(stderr, "Setting year %d is OK \n",
+ cutoff_dates[i].tm_year + 1900);
+ }
done:
fprintf(stderr, "\n\n\t\t\t *** Test complete ***\n");
diff --git a/tools/testing/selftests/timers/rtctest_setdate.c b/tools/testing/selftests/timers/rtctest_setdate.c
new file mode 100644
index 0000000..2cb7848
--- /dev/null
+++ b/tools/testing/selftests/timers/rtctest_setdate.c
@@ -0,0 +1,86 @@
+/* Real Time Clock Driver Test
+ * by: Benjamin Gaignard (benjamin.gaignard@linaro.org)
+ *
+ * To build
+ * gcc rtctest_setdate.c -o rtctest_setdate
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <stdio.h>
+#include <linux/rtc.h>
+#include <sys/ioctl.h>
+#include <sys/time.h>
+#include <sys/types.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <errno.h>
+
+static const char default_time[] = "00:00:00";
+
+int main(int argc, char **argv)
+{
+ int fd, retval;
+ struct rtc_time new, current;
+ const char *rtc, *date;
+ const char *time = default_time;
+
+ switch (argc) {
+ case 4:
+ time = argv[3];
+ /* FALLTHROUGH */
+ case 3:
+ date = argv[2];
+ rtc = argv[1];
+ break;
+ default:
+ fprintf(stderr, "usage: rtctest_setdate <rtcdev> <DD-MM-YYYY> [HH:MM:SS]\n");
+ return 1;
+ }
+
+ fd = open(rtc, O_RDONLY);
+ if (fd == -1) {
+ perror(rtc);
+ exit(errno);
+ }
+
+ sscanf(date, "%d-%d-%d", &new.tm_mday, &new.tm_mon, &new.tm_year);
+ new.tm_mon -= 1;
+ new.tm_year -= 1900;
+ sscanf(time, "%d:%d:%d", &new.tm_hour, &new.tm_min, &new.tm_sec);
+
+ fprintf(stderr, "Test will set RTC date/time to %d-%d-%d, %02d:%02d:%02d.\n",
+ new.tm_mday, new.tm_mon + 1, new.tm_year + 1900,
+ new.tm_hour, new.tm_min, new.tm_sec);
+
+ /* Write the new date in RTC */
+ retval = ioctl(fd, RTC_SET_TIME, &new);
+ if (retval == -1) {
+ perror("RTC_SET_TIME ioctl");
+ close(fd);
+ exit(errno);
+ }
+
+ /* Read back */
+ retval = ioctl(fd, RTC_RD_TIME, ¤t);
+ if (retval == -1) {
+ perror("RTC_RD_TIME ioctl");
+ exit(errno);
+ }
+
+ fprintf(stderr, "\n\nCurrent RTC date/time is %d-%d-%d, %02d:%02d:%02d.\n",
+ current.tm_mday, current.tm_mon + 1, current.tm_year + 1900,
+ current.tm_hour, current.tm_min, current.tm_sec);
+
+ close(fd);
+ return 0;
+}
diff --git a/virt/kvm/arm/mmu.c b/virt/kvm/arm/mmu.c
index 0e1fc75..2ea21da 100644
--- a/virt/kvm/arm/mmu.c
+++ b/virt/kvm/arm/mmu.c
@@ -1718,12 +1718,16 @@
int kvm_age_hva(struct kvm *kvm, unsigned long start, unsigned long end)
{
+ if (!kvm->arch.pgd)
+ return 0;
trace_kvm_age_hva(start, end);
return handle_hva_to_gpa(kvm, start, end, kvm_age_hva_handler, NULL);
}
int kvm_test_age_hva(struct kvm *kvm, unsigned long hva)
{
+ if (!kvm->arch.pgd)
+ return 0;
trace_kvm_test_age_hva(hva);
return handle_hva_to_gpa(kvm, hva, hva, kvm_test_age_hva_handler, NULL);
}
diff --git a/virt/kvm/arm/pmu.c b/virt/kvm/arm/pmu.c
index fc8a723..8a9c423 100644
--- a/virt/kvm/arm/pmu.c
+++ b/virt/kvm/arm/pmu.c
@@ -203,11 +203,15 @@
return reg;
}
-static void kvm_pmu_check_overflow(struct kvm_vcpu *vcpu)
+static void kvm_pmu_update_state(struct kvm_vcpu *vcpu)
{
struct kvm_pmu *pmu = &vcpu->arch.pmu;
- bool overflow = !!kvm_pmu_overflow_status(vcpu);
+ bool overflow;
+ if (!kvm_arm_pmu_v3_ready(vcpu))
+ return;
+
+ overflow = !!kvm_pmu_overflow_status(vcpu);
if (pmu->irq_level == overflow)
return;
@@ -215,33 +219,11 @@
if (likely(irqchip_in_kernel(vcpu->kvm))) {
int ret = kvm_vgic_inject_irq(vcpu->kvm, vcpu->vcpu_id,
- pmu->irq_num, overflow,
- &vcpu->arch.pmu);
+ pmu->irq_num, overflow, pmu);
WARN_ON(ret);
}
}
-/**
- * kvm_pmu_overflow_set - set PMU overflow interrupt
- * @vcpu: The vcpu pointer
- * @val: the value guest writes to PMOVSSET register
- */
-void kvm_pmu_overflow_set(struct kvm_vcpu *vcpu, u64 val)
-{
- if (val == 0)
- return;
-
- vcpu_sys_reg(vcpu, PMOVSSET_EL0) |= val;
- kvm_pmu_check_overflow(vcpu);
-}
-
-static void kvm_pmu_update_state(struct kvm_vcpu *vcpu)
-{
- if (!kvm_arm_pmu_v3_ready(vcpu))
- return;
- kvm_pmu_check_overflow(vcpu);
-}
-
bool kvm_pmu_should_notify_user(struct kvm_vcpu *vcpu)
{
struct kvm_pmu *pmu = &vcpu->arch.pmu;
@@ -303,7 +285,7 @@
}
/**
- * When perf event overflows, call kvm_pmu_overflow_set to set overflow status.
+ * When the perf event overflows, set the overflow status and inform the vcpu.
*/
static void kvm_pmu_perf_overflow(struct perf_event *perf_event,
struct perf_sample_data *data,
@@ -313,7 +295,12 @@
struct kvm_vcpu *vcpu = kvm_pmc_to_vcpu(pmc);
int idx = pmc->idx;
- kvm_pmu_overflow_set(vcpu, BIT(idx));
+ vcpu_sys_reg(vcpu, PMOVSSET_EL0) |= BIT(idx);
+
+ if (kvm_pmu_overflow_status(vcpu)) {
+ kvm_make_request(KVM_REQ_IRQ_PENDING, vcpu);
+ kvm_vcpu_kick(vcpu);
+ }
}
/**
@@ -341,7 +328,7 @@
reg = lower_32_bits(reg);
vcpu_sys_reg(vcpu, PMEVCNTR0_EL0 + i) = reg;
if (!reg)
- kvm_pmu_overflow_set(vcpu, BIT(i));
+ vcpu_sys_reg(vcpu, PMOVSSET_EL0) |= BIT(i);
}
}
}
diff --git a/virt/kvm/arm/vgic/vgic-init.c b/virt/kvm/arm/vgic/vgic-init.c
index 3a0b899..5801261 100644
--- a/virt/kvm/arm/vgic/vgic-init.c
+++ b/virt/kvm/arm/vgic/vgic-init.c
@@ -285,9 +285,6 @@
if (ret)
goto out;
- if (vgic_has_its(kvm))
- dist->msis_require_devid = true;
-
kvm_for_each_vcpu(i, vcpu, kvm)
kvm_vgic_vcpu_enable(vcpu);
diff --git a/virt/kvm/arm/vgic/vgic-its.c b/virt/kvm/arm/vgic/vgic-its.c
index 2dff288..aa6b68d 100644
--- a/virt/kvm/arm/vgic/vgic-its.c
+++ b/virt/kvm/arm/vgic/vgic-its.c
@@ -1598,6 +1598,7 @@
INIT_LIST_HEAD(&its->device_list);
INIT_LIST_HEAD(&its->collection_list);
+ dev->kvm->arch.vgic.msis_require_devid = true;
dev->kvm->arch.vgic.has_its = true;
its->enabled = false;
its->dev = dev;
diff --git a/virt/kvm/arm/vgic/vgic-mmio-v3.c b/virt/kvm/arm/vgic/vgic-mmio-v3.c
index 714fa39..408ef06 100644
--- a/virt/kvm/arm/vgic/vgic-mmio-v3.c
+++ b/virt/kvm/arm/vgic/vgic-mmio-v3.c
@@ -369,7 +369,7 @@
return;
do {
- old_propbaser = dist->propbaser;
+ old_propbaser = READ_ONCE(dist->propbaser);
propbaser = old_propbaser;
propbaser = update_64bit_reg(propbaser, addr & 4, len, val);
propbaser = vgic_sanitise_propbaser(propbaser);
@@ -397,7 +397,7 @@
return;
do {
- old_pendbaser = vgic_cpu->pendbaser;
+ old_pendbaser = READ_ONCE(vgic_cpu->pendbaser);
pendbaser = old_pendbaser;
pendbaser = update_64bit_reg(pendbaser, addr & 4, len, val);
pendbaser = vgic_sanitise_pendbaser(pendbaser);
diff --git a/virt/kvm/eventfd.c b/virt/kvm/eventfd.c
index 9120edf..f2ac53a 100644
--- a/virt/kvm/eventfd.c
+++ b/virt/kvm/eventfd.c
@@ -825,7 +825,7 @@
if (ret < 0)
goto unlock_fail;
- kvm->buses[bus_idx]->ioeventfd_count++;
+ kvm_get_bus(kvm, bus_idx)->ioeventfd_count++;
list_add_tail(&p->list, &kvm->ioeventfds);
mutex_unlock(&kvm->slots_lock);
@@ -848,6 +848,7 @@
{
struct _ioeventfd *p, *tmp;
struct eventfd_ctx *eventfd;
+ struct kvm_io_bus *bus;
int ret = -ENOENT;
eventfd = eventfd_ctx_fdget(args->fd);
@@ -870,8 +871,9 @@
continue;
kvm_io_bus_unregister_dev(kvm, bus_idx, &p->dev);
- if (kvm->buses[bus_idx])
- kvm->buses[bus_idx]->ioeventfd_count--;
+ bus = kvm_get_bus(kvm, bus_idx);
+ if (bus)
+ bus->ioeventfd_count--;
ioeventfd_release(p);
ret = 0;
break;
diff --git a/virt/kvm/irqchip.c b/virt/kvm/irqchip.c
index 31e40c9..b1286c4 100644
--- a/virt/kvm/irqchip.c
+++ b/virt/kvm/irqchip.c
@@ -230,7 +230,7 @@
}
mutex_lock(&kvm->irq_lock);
- old = kvm->irq_routing;
+ old = rcu_dereference_protected(kvm->irq_routing, 1);
rcu_assign_pointer(kvm->irq_routing, new);
kvm_irq_routing_update(kvm);
kvm_arch_irq_routing_update(kvm);
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index 19f0ecb..15252d7 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -130,6 +130,12 @@
static bool largepages_enabled = true;
+#define KVM_EVENT_CREATE_VM 0
+#define KVM_EVENT_DESTROY_VM 1
+static void kvm_uevent_notify_change(unsigned int type, struct kvm *kvm);
+static unsigned long long kvm_createvm_count;
+static unsigned long long kvm_active_vms;
+
bool kvm_is_reserved_pfn(kvm_pfn_t pfn)
{
if (pfn_valid(pfn))
@@ -187,12 +193,23 @@
{
}
+static inline bool kvm_kick_many_cpus(const struct cpumask *cpus, bool wait)
+{
+ if (unlikely(!cpus))
+ cpus = cpu_online_mask;
+
+ if (cpumask_empty(cpus))
+ return false;
+
+ smp_call_function_many(cpus, ack_flush, NULL, wait);
+ return true;
+}
+
bool kvm_make_all_cpus_request(struct kvm *kvm, unsigned int req)
{
int i, cpu, me;
cpumask_var_t cpus;
- bool called = true;
- bool wait = req & KVM_REQUEST_WAIT;
+ bool called;
struct kvm_vcpu *vcpu;
zalloc_cpumask_var(&cpus, GFP_ATOMIC);
@@ -207,14 +224,9 @@
if (cpus != NULL && cpu != -1 && cpu != me &&
kvm_request_needs_ipi(vcpu, req))
- cpumask_set_cpu(cpu, cpus);
+ __cpumask_set_cpu(cpu, cpus);
}
- if (unlikely(cpus == NULL))
- smp_call_function_many(cpu_online_mask, ack_flush, NULL, wait);
- else if (!cpumask_empty(cpus))
- smp_call_function_many(cpus, ack_flush, NULL, wait);
- else
- called = false;
+ called = kvm_kick_many_cpus(cpus, !!(req & KVM_REQUEST_WAIT));
put_cpu();
free_cpumask_var(cpus);
return called;
@@ -293,7 +305,12 @@
void kvm_vcpu_uninit(struct kvm_vcpu *vcpu)
{
- put_pid(vcpu->pid);
+ /*
+ * no need for rcu_read_lock as VCPU_RUN is the only place that
+ * will change the vcpu->pid pointer and on uninit all file
+ * descriptors are already gone.
+ */
+ put_pid(rcu_dereference_protected(vcpu->pid, 1));
kvm_arch_vcpu_uninit(vcpu);
free_page((unsigned long)vcpu->run);
}
@@ -674,8 +691,8 @@
if (init_srcu_struct(&kvm->irq_srcu))
goto out_err_no_irq_srcu;
for (i = 0; i < KVM_NR_BUSES; i++) {
- kvm->buses[i] = kzalloc(sizeof(struct kvm_io_bus),
- GFP_KERNEL);
+ rcu_assign_pointer(kvm->buses[i],
+ kzalloc(sizeof(struct kvm_io_bus), GFP_KERNEL));
if (!kvm->buses[i])
goto out_err;
}
@@ -700,9 +717,9 @@
hardware_disable_all();
out_err_no_disable:
for (i = 0; i < KVM_NR_BUSES; i++)
- kfree(kvm->buses[i]);
+ kfree(kvm_get_bus(kvm, i));
for (i = 0; i < KVM_ADDRESS_SPACE_NUM; i++)
- kvm_free_memslots(kvm, kvm->memslots[i]);
+ kvm_free_memslots(kvm, __kvm_memslots(kvm, i));
kvm_arch_free_vm(kvm);
mmdrop(current->mm);
return ERR_PTR(r);
@@ -728,6 +745,7 @@
int i;
struct mm_struct *mm = kvm->mm;
+ kvm_uevent_notify_change(KVM_EVENT_DESTROY_VM, kvm);
kvm_destroy_vm_debugfs(kvm);
kvm_arch_sync_events(kvm);
spin_lock(&kvm_lock);
@@ -735,8 +753,10 @@
spin_unlock(&kvm_lock);
kvm_free_irq_routing(kvm);
for (i = 0; i < KVM_NR_BUSES; i++) {
- if (kvm->buses[i])
- kvm_io_bus_destroy(kvm->buses[i]);
+ struct kvm_io_bus *bus = kvm_get_bus(kvm, i);
+
+ if (bus)
+ kvm_io_bus_destroy(bus);
kvm->buses[i] = NULL;
}
kvm_coalesced_mmio_free(kvm);
@@ -748,7 +768,7 @@
kvm_arch_destroy_vm(kvm);
kvm_destroy_devices(kvm);
for (i = 0; i < KVM_ADDRESS_SPACE_NUM; i++)
- kvm_free_memslots(kvm, kvm->memslots[i]);
+ kvm_free_memslots(kvm, __kvm_memslots(kvm, i));
cleanup_srcu_struct(&kvm->irq_srcu);
cleanup_srcu_struct(&kvm->srcu);
kvm_arch_free_vm(kvm);
@@ -2551,13 +2571,14 @@
if (r)
return r;
switch (ioctl) {
- case KVM_RUN:
+ case KVM_RUN: {
+ struct pid *oldpid;
r = -EINVAL;
if (arg)
goto out;
- if (unlikely(vcpu->pid != current->pids[PIDTYPE_PID].pid)) {
+ oldpid = rcu_access_pointer(vcpu->pid);
+ if (unlikely(oldpid != current->pids[PIDTYPE_PID].pid)) {
/* The thread running this VCPU changed. */
- struct pid *oldpid = vcpu->pid;
struct pid *newpid = get_task_pid(current, PIDTYPE_PID);
rcu_assign_pointer(vcpu->pid, newpid);
@@ -2568,6 +2589,7 @@
r = kvm_arch_vcpu_ioctl_run(vcpu, vcpu->run);
trace_kvm_userspace_exit(vcpu->run->exit_reason, r);
break;
+ }
case KVM_GET_REGS: {
struct kvm_regs *kvm_regs;
@@ -3202,6 +3224,7 @@
fput(file);
return -ENOMEM;
}
+ kvm_uevent_notify_change(KVM_EVENT_CREATE_VM, kvm);
fd_install(r, file);
return r;
@@ -3563,7 +3586,7 @@
{
struct kvm_io_bus *new_bus, *bus;
- bus = kvm->buses[bus_idx];
+ bus = kvm_get_bus(kvm, bus_idx);
if (!bus)
return -ENOMEM;
@@ -3592,7 +3615,7 @@
int i;
struct kvm_io_bus *new_bus, *bus;
- bus = kvm->buses[bus_idx];
+ bus = kvm_get_bus(kvm, bus_idx);
if (!bus)
return;
@@ -3854,6 +3877,56 @@
[KVM_STAT_VM] = &vm_stat_fops,
};
+static void kvm_uevent_notify_change(unsigned int type, struct kvm *kvm)
+{
+ struct kobj_uevent_env *env;
+ unsigned long long created, active;
+
+ if (!kvm_dev.this_device || !kvm)
+ return;
+
+ spin_lock(&kvm_lock);
+ if (type == KVM_EVENT_CREATE_VM) {
+ kvm_createvm_count++;
+ kvm_active_vms++;
+ } else if (type == KVM_EVENT_DESTROY_VM) {
+ kvm_active_vms--;
+ }
+ created = kvm_createvm_count;
+ active = kvm_active_vms;
+ spin_unlock(&kvm_lock);
+
+ env = kzalloc(sizeof(*env), GFP_KERNEL);
+ if (!env)
+ return;
+
+ add_uevent_var(env, "CREATED=%llu", created);
+ add_uevent_var(env, "COUNT=%llu", active);
+
+ if (type == KVM_EVENT_CREATE_VM) {
+ add_uevent_var(env, "EVENT=create");
+ kvm->userspace_pid = task_pid_nr(current);
+ } else if (type == KVM_EVENT_DESTROY_VM) {
+ add_uevent_var(env, "EVENT=destroy");
+ }
+ add_uevent_var(env, "PID=%d", kvm->userspace_pid);
+
+ if (kvm->debugfs_dentry) {
+ char *tmp, *p = kmalloc(PATH_MAX, GFP_KERNEL);
+
+ if (p) {
+ tmp = dentry_path_raw(kvm->debugfs_dentry, p, PATH_MAX);
+ if (!IS_ERR(tmp))
+ add_uevent_var(env, "STATS_PATH=%s", tmp);
+ kfree(p);
+ }
+ }
+ /* no need for checks, since we are adding at most only 5 keys */
+ env->envp[env->envp_idx++] = NULL;
+ kobject_uevent_env(&kvm_dev.this_device->kobj, KOBJ_CHANGE, env->envp);
+ kfree(env);
+}
+
static int kvm_init_debug(void)
{
int r = -EEXIST;
diff --git a/virt/kvm/vfio.c b/virt/kvm/vfio.c
index 37d9118..d99850c 100644
--- a/virt/kvm/vfio.c
+++ b/virt/kvm/vfio.c
@@ -51,6 +51,22 @@
return vfio_group;
}
+static bool kvm_vfio_external_group_match_file(struct vfio_group *group,
+ struct file *filep)
+{
+ bool ret, (*fn)(struct vfio_group *, struct file *);
+
+ fn = symbol_get(vfio_external_group_match_file);
+ if (!fn)
+ return false;
+
+ ret = fn(group, filep);
+
+ symbol_put(vfio_external_group_match_file);
+
+ return ret;
+}
+
static void kvm_vfio_group_put_external_user(struct vfio_group *vfio_group)
{
void (*fn)(struct vfio_group *);
@@ -231,37 +247,31 @@
if (!f.file)
return -EBADF;
- vfio_group = kvm_vfio_group_get_external_user(f.file);
- fdput(f);
-
- if (IS_ERR(vfio_group))
- return PTR_ERR(vfio_group);
-
ret = -ENOENT;
mutex_lock(&kv->lock);
list_for_each_entry(kvg, &kv->group_list, node) {
- if (kvg->vfio_group != vfio_group)
+ if (!kvm_vfio_external_group_match_file(kvg->vfio_group,
+ f.file))
continue;
list_del(&kvg->node);
+ kvm_arch_end_assignment(dev->kvm);
+#ifdef CONFIG_SPAPR_TCE_IOMMU
+ kvm_spapr_tce_release_vfio_group(dev->kvm,
+ kvg->vfio_group);
+#endif
+ kvm_vfio_group_set_kvm(kvg->vfio_group, NULL);
kvm_vfio_group_put_external_user(kvg->vfio_group);
kfree(kvg);
ret = 0;
break;
}
- kvm_arch_end_assignment(dev->kvm);
-
mutex_unlock(&kv->lock);
-#ifdef CONFIG_SPAPR_TCE_IOMMU
- kvm_spapr_tce_release_vfio_group(dev->kvm, vfio_group);
-#endif
- kvm_vfio_group_set_kvm(vfio_group, NULL);
-
- kvm_vfio_group_put_external_user(vfio_group);
+ fdput(f);
kvm_vfio_update_coherency(dev);
