| /* |
| * videobuf2-dma-contig.c - DMA contig memory allocator for videobuf2 |
| * |
| * Copyright (C) 2010 Samsung Electronics |
| * |
| * Author: Pawel Osciak <pawel@osciak.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation. |
| */ |
| |
| #include <linux/dma-buf.h> |
| #include <linux/module.h> |
| #include <linux/scatterlist.h> |
| #include <linux/sched.h> |
| #include <linux/slab.h> |
| #include <linux/dma-mapping.h> |
| |
| #include <media/videobuf2-v4l2.h> |
| #include <media/videobuf2-dma-contig.h> |
| #include <media/videobuf2-memops.h> |
| |
| struct vb2_dc_conf { |
| struct device *dev; |
| }; |
| |
| struct vb2_dc_buf { |
| struct device *dev; |
| void *vaddr; |
| unsigned long size; |
| void *cookie; |
| dma_addr_t dma_addr; |
| struct dma_attrs attrs; |
| enum dma_data_direction dma_dir; |
| struct sg_table *dma_sgt; |
| struct frame_vector *vec; |
| |
| /* MMAP related */ |
| struct vb2_vmarea_handler handler; |
| atomic_t refcount; |
| struct sg_table *sgt_base; |
| |
| /* DMABUF related */ |
| struct dma_buf_attachment *db_attach; |
| }; |
| |
| /*********************************************/ |
| /* scatterlist table functions */ |
| /*********************************************/ |
| |
| static unsigned long vb2_dc_get_contiguous_size(struct sg_table *sgt) |
| { |
| struct scatterlist *s; |
| dma_addr_t expected = sg_dma_address(sgt->sgl); |
| unsigned int i; |
| unsigned long size = 0; |
| |
| for_each_sg(sgt->sgl, s, sgt->nents, i) { |
| if (sg_dma_address(s) != expected) |
| break; |
| expected = sg_dma_address(s) + sg_dma_len(s); |
| size += sg_dma_len(s); |
| } |
| return size; |
| } |
| |
| /*********************************************/ |
| /* callbacks for all buffers */ |
| /*********************************************/ |
| |
| static void *vb2_dc_cookie(void *buf_priv) |
| { |
| struct vb2_dc_buf *buf = buf_priv; |
| |
| return &buf->dma_addr; |
| } |
| |
| static void *vb2_dc_vaddr(void *buf_priv) |
| { |
| struct vb2_dc_buf *buf = buf_priv; |
| |
| if (!buf->vaddr && buf->db_attach) |
| buf->vaddr = dma_buf_vmap(buf->db_attach->dmabuf); |
| |
| return buf->vaddr; |
| } |
| |
| static unsigned int vb2_dc_num_users(void *buf_priv) |
| { |
| struct vb2_dc_buf *buf = buf_priv; |
| |
| return atomic_read(&buf->refcount); |
| } |
| |
| static void vb2_dc_prepare(void *buf_priv) |
| { |
| struct vb2_dc_buf *buf = buf_priv; |
| struct sg_table *sgt = buf->dma_sgt; |
| |
| /* DMABUF exporter will flush the cache for us */ |
| if (!sgt || buf->db_attach) |
| return; |
| |
| dma_sync_sg_for_device(buf->dev, sgt->sgl, sgt->orig_nents, |
| buf->dma_dir); |
| } |
| |
| static void vb2_dc_finish(void *buf_priv) |
| { |
| struct vb2_dc_buf *buf = buf_priv; |
| struct sg_table *sgt = buf->dma_sgt; |
| |
| /* DMABUF exporter will flush the cache for us */ |
| if (!sgt || buf->db_attach) |
| return; |
| |
| dma_sync_sg_for_cpu(buf->dev, sgt->sgl, sgt->orig_nents, buf->dma_dir); |
| } |
| |
| /*********************************************/ |
| /* callbacks for MMAP buffers */ |
| /*********************************************/ |
| |
| static void vb2_dc_put(void *buf_priv) |
| { |
| struct vb2_dc_buf *buf = buf_priv; |
| |
| if (!atomic_dec_and_test(&buf->refcount)) |
| return; |
| |
| if (buf->sgt_base) { |
| sg_free_table(buf->sgt_base); |
| kfree(buf->sgt_base); |
| } |
| dma_free_attrs(buf->dev, buf->size, buf->cookie, buf->dma_addr, |
| &buf->attrs); |
| put_device(buf->dev); |
| kfree(buf); |
| } |
| |
| static void *vb2_dc_alloc(void *alloc_ctx, const struct dma_attrs *attrs, |
| unsigned long size, enum dma_data_direction dma_dir, |
| gfp_t gfp_flags) |
| { |
| struct vb2_dc_conf *conf = alloc_ctx; |
| struct device *dev = conf->dev; |
| struct vb2_dc_buf *buf; |
| |
| buf = kzalloc(sizeof *buf, GFP_KERNEL); |
| if (!buf) |
| return ERR_PTR(-ENOMEM); |
| |
| if (attrs) |
| buf->attrs = *attrs; |
| buf->cookie = dma_alloc_attrs(dev, size, &buf->dma_addr, |
| GFP_KERNEL | gfp_flags, &buf->attrs); |
| if (!buf->cookie) { |
| dev_err(dev, "dma_alloc_coherent of size %ld failed\n", size); |
| kfree(buf); |
| return ERR_PTR(-ENOMEM); |
| } |
| |
| if (!dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, &buf->attrs)) |
| buf->vaddr = buf->cookie; |
| |
| /* Prevent the device from being released while the buffer is used */ |
| buf->dev = get_device(dev); |
| buf->size = size; |
| buf->dma_dir = dma_dir; |
| |
| buf->handler.refcount = &buf->refcount; |
| buf->handler.put = vb2_dc_put; |
| buf->handler.arg = buf; |
| |
| atomic_inc(&buf->refcount); |
| |
| return buf; |
| } |
| |
| static int vb2_dc_mmap(void *buf_priv, struct vm_area_struct *vma) |
| { |
| struct vb2_dc_buf *buf = buf_priv; |
| int ret; |
| |
| if (!buf) { |
| printk(KERN_ERR "No buffer to map\n"); |
| return -EINVAL; |
| } |
| |
| /* |
| * dma_mmap_* uses vm_pgoff as in-buffer offset, but we want to |
| * map whole buffer |
| */ |
| vma->vm_pgoff = 0; |
| |
| ret = dma_mmap_attrs(buf->dev, vma, buf->cookie, |
| buf->dma_addr, buf->size, &buf->attrs); |
| |
| if (ret) { |
| pr_err("Remapping memory failed, error: %d\n", ret); |
| return ret; |
| } |
| |
| vma->vm_flags |= VM_DONTEXPAND | VM_DONTDUMP; |
| vma->vm_private_data = &buf->handler; |
| vma->vm_ops = &vb2_common_vm_ops; |
| |
| vma->vm_ops->open(vma); |
| |
| pr_debug("%s: mapped dma addr 0x%08lx at 0x%08lx, size %ld\n", |
| __func__, (unsigned long)buf->dma_addr, vma->vm_start, |
| buf->size); |
| |
| return 0; |
| } |
| |
| /*********************************************/ |
| /* DMABUF ops for exporters */ |
| /*********************************************/ |
| |
| struct vb2_dc_attachment { |
| struct sg_table sgt; |
| enum dma_data_direction dma_dir; |
| }; |
| |
| static int vb2_dc_dmabuf_ops_attach(struct dma_buf *dbuf, struct device *dev, |
| struct dma_buf_attachment *dbuf_attach) |
| { |
| struct vb2_dc_attachment *attach; |
| unsigned int i; |
| struct scatterlist *rd, *wr; |
| struct sg_table *sgt; |
| struct vb2_dc_buf *buf = dbuf->priv; |
| int ret; |
| |
| attach = kzalloc(sizeof(*attach), GFP_KERNEL); |
| if (!attach) |
| return -ENOMEM; |
| |
| sgt = &attach->sgt; |
| /* Copy the buf->base_sgt scatter list to the attachment, as we can't |
| * map the same scatter list to multiple attachments at the same time. |
| */ |
| ret = sg_alloc_table(sgt, buf->sgt_base->orig_nents, GFP_KERNEL); |
| if (ret) { |
| kfree(attach); |
| return -ENOMEM; |
| } |
| |
| rd = buf->sgt_base->sgl; |
| wr = sgt->sgl; |
| for (i = 0; i < sgt->orig_nents; ++i) { |
| sg_set_page(wr, sg_page(rd), rd->length, rd->offset); |
| rd = sg_next(rd); |
| wr = sg_next(wr); |
| } |
| |
| attach->dma_dir = DMA_NONE; |
| dbuf_attach->priv = attach; |
| |
| return 0; |
| } |
| |
| static void vb2_dc_dmabuf_ops_detach(struct dma_buf *dbuf, |
| struct dma_buf_attachment *db_attach) |
| { |
| struct vb2_dc_attachment *attach = db_attach->priv; |
| struct sg_table *sgt; |
| |
| if (!attach) |
| return; |
| |
| sgt = &attach->sgt; |
| |
| /* release the scatterlist cache */ |
| if (attach->dma_dir != DMA_NONE) |
| dma_unmap_sg(db_attach->dev, sgt->sgl, sgt->orig_nents, |
| attach->dma_dir); |
| sg_free_table(sgt); |
| kfree(attach); |
| db_attach->priv = NULL; |
| } |
| |
| static struct sg_table *vb2_dc_dmabuf_ops_map( |
| struct dma_buf_attachment *db_attach, enum dma_data_direction dma_dir) |
| { |
| struct vb2_dc_attachment *attach = db_attach->priv; |
| /* stealing dmabuf mutex to serialize map/unmap operations */ |
| struct mutex *lock = &db_attach->dmabuf->lock; |
| struct sg_table *sgt; |
| |
| mutex_lock(lock); |
| |
| sgt = &attach->sgt; |
| /* return previously mapped sg table */ |
| if (attach->dma_dir == dma_dir) { |
| mutex_unlock(lock); |
| return sgt; |
| } |
| |
| /* release any previous cache */ |
| if (attach->dma_dir != DMA_NONE) { |
| dma_unmap_sg(db_attach->dev, sgt->sgl, sgt->orig_nents, |
| attach->dma_dir); |
| attach->dma_dir = DMA_NONE; |
| } |
| |
| /* mapping to the client with new direction */ |
| sgt->nents = dma_map_sg(db_attach->dev, sgt->sgl, sgt->orig_nents, |
| dma_dir); |
| if (!sgt->nents) { |
| pr_err("failed to map scatterlist\n"); |
| mutex_unlock(lock); |
| return ERR_PTR(-EIO); |
| } |
| |
| attach->dma_dir = dma_dir; |
| |
| mutex_unlock(lock); |
| |
| return sgt; |
| } |
| |
| static void vb2_dc_dmabuf_ops_unmap(struct dma_buf_attachment *db_attach, |
| struct sg_table *sgt, enum dma_data_direction dma_dir) |
| { |
| /* nothing to be done here */ |
| } |
| |
| static void vb2_dc_dmabuf_ops_release(struct dma_buf *dbuf) |
| { |
| /* drop reference obtained in vb2_dc_get_dmabuf */ |
| vb2_dc_put(dbuf->priv); |
| } |
| |
| static void *vb2_dc_dmabuf_ops_kmap(struct dma_buf *dbuf, unsigned long pgnum) |
| { |
| struct vb2_dc_buf *buf = dbuf->priv; |
| |
| return buf->vaddr ? buf->vaddr + pgnum * PAGE_SIZE : NULL; |
| } |
| |
| static void *vb2_dc_dmabuf_ops_vmap(struct dma_buf *dbuf) |
| { |
| struct vb2_dc_buf *buf = dbuf->priv; |
| |
| return buf->vaddr; |
| } |
| |
| static int vb2_dc_dmabuf_ops_mmap(struct dma_buf *dbuf, |
| struct vm_area_struct *vma) |
| { |
| return vb2_dc_mmap(dbuf->priv, vma); |
| } |
| |
| static struct dma_buf_ops vb2_dc_dmabuf_ops = { |
| .attach = vb2_dc_dmabuf_ops_attach, |
| .detach = vb2_dc_dmabuf_ops_detach, |
| .map_dma_buf = vb2_dc_dmabuf_ops_map, |
| .unmap_dma_buf = vb2_dc_dmabuf_ops_unmap, |
| .kmap = vb2_dc_dmabuf_ops_kmap, |
| .kmap_atomic = vb2_dc_dmabuf_ops_kmap, |
| .vmap = vb2_dc_dmabuf_ops_vmap, |
| .mmap = vb2_dc_dmabuf_ops_mmap, |
| .release = vb2_dc_dmabuf_ops_release, |
| }; |
| |
| static struct sg_table *vb2_dc_get_base_sgt(struct vb2_dc_buf *buf) |
| { |
| int ret; |
| struct sg_table *sgt; |
| |
| sgt = kmalloc(sizeof(*sgt), GFP_KERNEL); |
| if (!sgt) { |
| dev_err(buf->dev, "failed to alloc sg table\n"); |
| return NULL; |
| } |
| |
| ret = dma_get_sgtable_attrs(buf->dev, sgt, buf->cookie, buf->dma_addr, |
| buf->size, &buf->attrs); |
| if (ret < 0) { |
| dev_err(buf->dev, "failed to get scatterlist from DMA API\n"); |
| kfree(sgt); |
| return NULL; |
| } |
| |
| return sgt; |
| } |
| |
| static struct dma_buf *vb2_dc_get_dmabuf(void *buf_priv, unsigned long flags) |
| { |
| struct vb2_dc_buf *buf = buf_priv; |
| struct dma_buf *dbuf; |
| DEFINE_DMA_BUF_EXPORT_INFO(exp_info); |
| |
| exp_info.ops = &vb2_dc_dmabuf_ops; |
| exp_info.size = buf->size; |
| exp_info.flags = flags; |
| exp_info.priv = buf; |
| |
| if (!buf->sgt_base) |
| buf->sgt_base = vb2_dc_get_base_sgt(buf); |
| |
| if (WARN_ON(!buf->sgt_base)) |
| return NULL; |
| |
| dbuf = dma_buf_export(&exp_info); |
| if (IS_ERR(dbuf)) |
| return NULL; |
| |
| /* dmabuf keeps reference to vb2 buffer */ |
| atomic_inc(&buf->refcount); |
| |
| return dbuf; |
| } |
| |
| /*********************************************/ |
| /* callbacks for USERPTR buffers */ |
| /*********************************************/ |
| |
| static void vb2_dc_put_userptr(void *buf_priv) |
| { |
| struct vb2_dc_buf *buf = buf_priv; |
| struct sg_table *sgt = buf->dma_sgt; |
| int i; |
| struct page **pages; |
| |
| if (sgt) { |
| DEFINE_DMA_ATTRS(attrs); |
| |
| dma_set_attr(DMA_ATTR_SKIP_CPU_SYNC, &attrs); |
| /* |
| * No need to sync to CPU, it's already synced to the CPU |
| * since the finish() memop will have been called before this. |
| */ |
| dma_unmap_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents, |
| buf->dma_dir, &attrs); |
| pages = frame_vector_pages(buf->vec); |
| /* sgt should exist only if vector contains pages... */ |
| BUG_ON(IS_ERR(pages)); |
| for (i = 0; i < frame_vector_count(buf->vec); i++) |
| set_page_dirty_lock(pages[i]); |
| sg_free_table(sgt); |
| kfree(sgt); |
| } |
| vb2_destroy_framevec(buf->vec); |
| kfree(buf); |
| } |
| |
| /* |
| * For some kind of reserved memory there might be no struct page available, |
| * so all that can be done to support such 'pages' is to try to convert |
| * pfn to dma address or at the last resort just assume that |
| * dma address == physical address (like it has been assumed in earlier version |
| * of videobuf2-dma-contig |
| */ |
| |
| #ifdef __arch_pfn_to_dma |
| static inline dma_addr_t vb2_dc_pfn_to_dma(struct device *dev, unsigned long pfn) |
| { |
| return (dma_addr_t)__arch_pfn_to_dma(dev, pfn); |
| } |
| #elif defined(__pfn_to_bus) |
| static inline dma_addr_t vb2_dc_pfn_to_dma(struct device *dev, unsigned long pfn) |
| { |
| return (dma_addr_t)__pfn_to_bus(pfn); |
| } |
| #elif defined(__pfn_to_phys) |
| static inline dma_addr_t vb2_dc_pfn_to_dma(struct device *dev, unsigned long pfn) |
| { |
| return (dma_addr_t)__pfn_to_phys(pfn); |
| } |
| #else |
| static inline dma_addr_t vb2_dc_pfn_to_dma(struct device *dev, unsigned long pfn) |
| { |
| /* really, we cannot do anything better at this point */ |
| return (dma_addr_t)(pfn) << PAGE_SHIFT; |
| } |
| #endif |
| |
| static void *vb2_dc_get_userptr(void *alloc_ctx, unsigned long vaddr, |
| unsigned long size, enum dma_data_direction dma_dir) |
| { |
| struct vb2_dc_conf *conf = alloc_ctx; |
| struct vb2_dc_buf *buf; |
| struct frame_vector *vec; |
| unsigned long offset; |
| int n_pages, i; |
| int ret = 0; |
| struct sg_table *sgt; |
| unsigned long contig_size; |
| unsigned long dma_align = dma_get_cache_alignment(); |
| DEFINE_DMA_ATTRS(attrs); |
| |
| dma_set_attr(DMA_ATTR_SKIP_CPU_SYNC, &attrs); |
| |
| /* Only cache aligned DMA transfers are reliable */ |
| if (!IS_ALIGNED(vaddr | size, dma_align)) { |
| pr_debug("user data must be aligned to %lu bytes\n", dma_align); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| if (!size) { |
| pr_debug("size is zero\n"); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| buf = kzalloc(sizeof *buf, GFP_KERNEL); |
| if (!buf) |
| return ERR_PTR(-ENOMEM); |
| |
| buf->dev = conf->dev; |
| buf->dma_dir = dma_dir; |
| |
| offset = vaddr & ~PAGE_MASK; |
| vec = vb2_create_framevec(vaddr, size, dma_dir == DMA_FROM_DEVICE); |
| if (IS_ERR(vec)) { |
| ret = PTR_ERR(vec); |
| goto fail_buf; |
| } |
| buf->vec = vec; |
| n_pages = frame_vector_count(vec); |
| ret = frame_vector_to_pages(vec); |
| if (ret < 0) { |
| unsigned long *nums = frame_vector_pfns(vec); |
| |
| /* |
| * Failed to convert to pages... Check the memory is physically |
| * contiguous and use direct mapping |
| */ |
| for (i = 1; i < n_pages; i++) |
| if (nums[i-1] + 1 != nums[i]) |
| goto fail_pfnvec; |
| buf->dma_addr = vb2_dc_pfn_to_dma(buf->dev, nums[0]); |
| goto out; |
| } |
| |
| sgt = kzalloc(sizeof(*sgt), GFP_KERNEL); |
| if (!sgt) { |
| pr_err("failed to allocate sg table\n"); |
| ret = -ENOMEM; |
| goto fail_pfnvec; |
| } |
| |
| ret = sg_alloc_table_from_pages(sgt, frame_vector_pages(vec), n_pages, |
| offset, size, GFP_KERNEL); |
| if (ret) { |
| pr_err("failed to initialize sg table\n"); |
| goto fail_sgt; |
| } |
| |
| /* |
| * No need to sync to the device, this will happen later when the |
| * prepare() memop is called. |
| */ |
| sgt->nents = dma_map_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents, |
| buf->dma_dir, &attrs); |
| if (sgt->nents <= 0) { |
| pr_err("failed to map scatterlist\n"); |
| ret = -EIO; |
| goto fail_sgt_init; |
| } |
| |
| contig_size = vb2_dc_get_contiguous_size(sgt); |
| if (contig_size < size) { |
| pr_err("contiguous mapping is too small %lu/%lu\n", |
| contig_size, size); |
| ret = -EFAULT; |
| goto fail_map_sg; |
| } |
| |
| buf->dma_addr = sg_dma_address(sgt->sgl); |
| buf->dma_sgt = sgt; |
| out: |
| buf->size = size; |
| |
| return buf; |
| |
| fail_map_sg: |
| dma_unmap_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents, |
| buf->dma_dir, &attrs); |
| |
| fail_sgt_init: |
| sg_free_table(sgt); |
| |
| fail_sgt: |
| kfree(sgt); |
| |
| fail_pfnvec: |
| vb2_destroy_framevec(vec); |
| |
| fail_buf: |
| kfree(buf); |
| |
| return ERR_PTR(ret); |
| } |
| |
| /*********************************************/ |
| /* callbacks for DMABUF buffers */ |
| /*********************************************/ |
| |
| static int vb2_dc_map_dmabuf(void *mem_priv) |
| { |
| struct vb2_dc_buf *buf = mem_priv; |
| struct sg_table *sgt; |
| unsigned long contig_size; |
| |
| if (WARN_ON(!buf->db_attach)) { |
| pr_err("trying to pin a non attached buffer\n"); |
| return -EINVAL; |
| } |
| |
| if (WARN_ON(buf->dma_sgt)) { |
| pr_err("dmabuf buffer is already pinned\n"); |
| return 0; |
| } |
| |
| /* get the associated scatterlist for this buffer */ |
| sgt = dma_buf_map_attachment(buf->db_attach, buf->dma_dir); |
| if (IS_ERR(sgt)) { |
| pr_err("Error getting dmabuf scatterlist\n"); |
| return -EINVAL; |
| } |
| |
| /* checking if dmabuf is big enough to store contiguous chunk */ |
| contig_size = vb2_dc_get_contiguous_size(sgt); |
| if (contig_size < buf->size) { |
| pr_err("contiguous chunk is too small %lu/%lu b\n", |
| contig_size, buf->size); |
| dma_buf_unmap_attachment(buf->db_attach, sgt, buf->dma_dir); |
| return -EFAULT; |
| } |
| |
| buf->dma_addr = sg_dma_address(sgt->sgl); |
| buf->dma_sgt = sgt; |
| buf->vaddr = NULL; |
| |
| return 0; |
| } |
| |
| static void vb2_dc_unmap_dmabuf(void *mem_priv) |
| { |
| struct vb2_dc_buf *buf = mem_priv; |
| struct sg_table *sgt = buf->dma_sgt; |
| |
| if (WARN_ON(!buf->db_attach)) { |
| pr_err("trying to unpin a not attached buffer\n"); |
| return; |
| } |
| |
| if (WARN_ON(!sgt)) { |
| pr_err("dmabuf buffer is already unpinned\n"); |
| return; |
| } |
| |
| if (buf->vaddr) { |
| dma_buf_vunmap(buf->db_attach->dmabuf, buf->vaddr); |
| buf->vaddr = NULL; |
| } |
| dma_buf_unmap_attachment(buf->db_attach, sgt, buf->dma_dir); |
| |
| buf->dma_addr = 0; |
| buf->dma_sgt = NULL; |
| } |
| |
| static void vb2_dc_detach_dmabuf(void *mem_priv) |
| { |
| struct vb2_dc_buf *buf = mem_priv; |
| |
| /* if vb2 works correctly you should never detach mapped buffer */ |
| if (WARN_ON(buf->dma_addr)) |
| vb2_dc_unmap_dmabuf(buf); |
| |
| /* detach this attachment */ |
| dma_buf_detach(buf->db_attach->dmabuf, buf->db_attach); |
| kfree(buf); |
| } |
| |
| static void *vb2_dc_attach_dmabuf(void *alloc_ctx, struct dma_buf *dbuf, |
| unsigned long size, enum dma_data_direction dma_dir) |
| { |
| struct vb2_dc_conf *conf = alloc_ctx; |
| struct vb2_dc_buf *buf; |
| struct dma_buf_attachment *dba; |
| |
| if (dbuf->size < size) |
| return ERR_PTR(-EFAULT); |
| |
| buf = kzalloc(sizeof(*buf), GFP_KERNEL); |
| if (!buf) |
| return ERR_PTR(-ENOMEM); |
| |
| buf->dev = conf->dev; |
| /* create attachment for the dmabuf with the user device */ |
| dba = dma_buf_attach(dbuf, buf->dev); |
| if (IS_ERR(dba)) { |
| pr_err("failed to attach dmabuf\n"); |
| kfree(buf); |
| return dba; |
| } |
| |
| buf->dma_dir = dma_dir; |
| buf->size = size; |
| buf->db_attach = dba; |
| |
| return buf; |
| } |
| |
| /*********************************************/ |
| /* DMA CONTIG exported functions */ |
| /*********************************************/ |
| |
| const struct vb2_mem_ops vb2_dma_contig_memops = { |
| .alloc = vb2_dc_alloc, |
| .put = vb2_dc_put, |
| .get_dmabuf = vb2_dc_get_dmabuf, |
| .cookie = vb2_dc_cookie, |
| .vaddr = vb2_dc_vaddr, |
| .mmap = vb2_dc_mmap, |
| .get_userptr = vb2_dc_get_userptr, |
| .put_userptr = vb2_dc_put_userptr, |
| .prepare = vb2_dc_prepare, |
| .finish = vb2_dc_finish, |
| .map_dmabuf = vb2_dc_map_dmabuf, |
| .unmap_dmabuf = vb2_dc_unmap_dmabuf, |
| .attach_dmabuf = vb2_dc_attach_dmabuf, |
| .detach_dmabuf = vb2_dc_detach_dmabuf, |
| .num_users = vb2_dc_num_users, |
| }; |
| EXPORT_SYMBOL_GPL(vb2_dma_contig_memops); |
| |
| void *vb2_dma_contig_init_ctx(struct device *dev) |
| { |
| struct vb2_dc_conf *conf; |
| |
| conf = kzalloc(sizeof *conf, GFP_KERNEL); |
| if (!conf) |
| return ERR_PTR(-ENOMEM); |
| |
| conf->dev = dev; |
| |
| return conf; |
| } |
| EXPORT_SYMBOL_GPL(vb2_dma_contig_init_ctx); |
| |
| void vb2_dma_contig_cleanup_ctx(void *alloc_ctx) |
| { |
| if (!IS_ERR_OR_NULL(alloc_ctx)) |
| kfree(alloc_ctx); |
| } |
| EXPORT_SYMBOL_GPL(vb2_dma_contig_cleanup_ctx); |
| |
| /** |
| * vb2_dma_contig_set_max_seg_size() - configure DMA max segment size |
| * @dev: device for configuring DMA parameters |
| * @size: size of DMA max segment size to set |
| * |
| * To allow mapping the scatter-list into a single chunk in the DMA |
| * address space, the device is required to have the DMA max segment |
| * size parameter set to a value larger than the buffer size. Otherwise, |
| * the DMA-mapping subsystem will split the mapping into max segment |
| * size chunks. This function sets the DMA max segment size |
| * parameter to let DMA-mapping map a buffer as a single chunk in DMA |
| * address space. |
| * This code assumes that the DMA-mapping subsystem will merge all |
| * scatterlist segments if this is really possible (for example when |
| * an IOMMU is available and enabled). |
| * Ideally, this parameter should be set by the generic bus code, but it |
| * is left with the default 64KiB value due to historical litmiations in |
| * other subsystems (like limited USB host drivers) and there no good |
| * place to set it to the proper value. |
| * This function should be called from the drivers, which are known to |
| * operate on platforms with IOMMU and provide access to shared buffers |
| * (either USERPTR or DMABUF). This should be done before initializing |
| * videobuf2 queue. |
| */ |
| int vb2_dma_contig_set_max_seg_size(struct device *dev, unsigned int size) |
| { |
| if (!dev->dma_parms) { |
| dev->dma_parms = kzalloc(sizeof(dev->dma_parms), GFP_KERNEL); |
| if (!dev->dma_parms) |
| return -ENOMEM; |
| } |
| if (dma_get_max_seg_size(dev) < size) |
| return dma_set_max_seg_size(dev, size); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(vb2_dma_contig_set_max_seg_size); |
| |
| /* |
| * vb2_dma_contig_clear_max_seg_size() - release resources for DMA parameters |
| * @dev: device for configuring DMA parameters |
| * |
| * This function releases resources allocated to configure DMA parameters |
| * (see vb2_dma_contig_set_max_seg_size() function). It should be called from |
| * device drivers on driver remove. |
| */ |
| void vb2_dma_contig_clear_max_seg_size(struct device *dev) |
| { |
| kfree(dev->dma_parms); |
| dev->dma_parms = NULL; |
| } |
| EXPORT_SYMBOL_GPL(vb2_dma_contig_clear_max_seg_size); |
| |
| MODULE_DESCRIPTION("DMA-contig memory handling routines for videobuf2"); |
| MODULE_AUTHOR("Pawel Osciak <pawel@osciak.com>"); |
| MODULE_LICENSE("GPL"); |