Fix common misspellings

Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
diff --git a/drivers/media/dvb/frontends/atbm8830.h b/drivers/media/dvb/frontends/atbm8830.h
index e8149f3..0242733 100644
--- a/drivers/media/dvb/frontends/atbm8830.h
+++ b/drivers/media/dvb/frontends/atbm8830.h
@@ -39,7 +39,7 @@
 	/* parallel or serial transport stream */
 	u8 serial_ts;
 
-	/* transport stream clock output only when receving valid stream */
+	/* transport stream clock output only when receiving valid stream */
 	u8 ts_clk_gated;
 
 	/* Decoder sample TS data at rising edge of clock */
diff --git a/drivers/media/dvb/frontends/au8522_dig.c b/drivers/media/dvb/frontends/au8522_dig.c
index 65f6a36..1d57294 100644
--- a/drivers/media/dvb/frontends/au8522_dig.c
+++ b/drivers/media/dvb/frontends/au8522_dig.c
@@ -635,7 +635,7 @@
 	struct au8522_led_config *led_config = state->config->led_cfg;
 	u8 val;
 
-	/* bail out if we cant control an LED */
+	/* bail out if we can't control an LED */
 	if (!led_config || !led_config->gpio_output ||
 	    !led_config->gpio_output_enable || !led_config->gpio_output_disable)
 		return 0;
@@ -665,7 +665,7 @@
 	struct au8522_led_config *led_config = state->config->led_cfg;
 	int i, ret = 0;
 
-	/* bail out if we cant control an LED */
+	/* bail out if we can't control an LED */
 	if (!led_config || !led_config->gpio_leds ||
 	    !led_config->num_led_states || !led_config->led_states)
 		return 0;
@@ -803,7 +803,7 @@
 	int led;
 	u16 strong;
 
-	/* bail out if we cant control an LED */
+	/* bail out if we can't control an LED */
 	if (!led_config)
 		return 0;
 
diff --git a/drivers/media/dvb/frontends/bcm3510.c b/drivers/media/dvb/frontends/bcm3510.c
index cf5e576..8aff586 100644
--- a/drivers/media/dvb/frontends/bcm3510.c
+++ b/drivers/media/dvb/frontends/bcm3510.c
@@ -155,7 +155,7 @@
 	unsigned long t;
 
 /* Check if any previous HAB request still needs to be serviced by the
- * Aquisition Processor before sending new request */
+ * Acquisition Processor before sending new request */
 	if ((ret = bcm3510_readB(st,0xa8,&v)) < 0)
 		return ret;
 	if (v.HABSTAT_a8.HABR) {
@@ -361,7 +361,7 @@
 /* Set duration of the initial state of TUNCTL = 3.34 micro Sec */
 	c.TUNCTL_state = 0x40;
 
-/* PRESCALER DEVIDE RATIO | BC1_2_3_4; (band switch), 1stosc REFERENCE COUNTER REF_S12 and REF_S11 */
+/* PRESCALER DIVIDE RATIO | BC1_2_3_4; (band switch), 1stosc REFERENCE COUNTER REF_S12 and REF_S11 */
 	c.ctl_dat[0].ctrl.size = BITS_8;
 	c.ctl_dat[0].data      = 0x80 | bc;
 
@@ -397,7 +397,7 @@
 	c.ctl_dat[7].ctrl.cs0  = 1;
 	c.ctl_dat[7].data      = 0x40;
 
-/* PRESCALER DEVIDE RATIO, 2ndosc REFERENCE COUNTER REF_S12 and REF_S11 */
+/* PRESCALER DIVIDE RATIO, 2ndosc REFERENCE COUNTER REF_S12 and REF_S11 */
 	c.ctl_dat[8].ctrl.size = BITS_8;
 	c.ctl_dat[8].data      = 0x80;
 
diff --git a/drivers/media/dvb/frontends/cx22700.c b/drivers/media/dvb/frontends/cx22700.c
index 5fbc0fc..0142214 100644
--- a/drivers/media/dvb/frontends/cx22700.c
+++ b/drivers/media/dvb/frontends/cx22700.c
@@ -179,7 +179,7 @@
 	cx22700_writereg (state, 0x06, val);
 
 	cx22700_writereg (state, 0x08, 0x04 | 0x02);  /* use user tps parameters */
-	cx22700_writereg (state, 0x08, 0x04);         /* restart aquisition */
+	cx22700_writereg (state, 0x08, 0x04);         /* restart acquisition */
 
 	return 0;
 }
diff --git a/drivers/media/dvb/frontends/cx22702.c b/drivers/media/dvb/frontends/cx22702.c
index ff6c498..3139558 100644
--- a/drivers/media/dvb/frontends/cx22702.c
+++ b/drivers/media/dvb/frontends/cx22702.c
@@ -55,7 +55,7 @@
 
 /* Register values to initialise the demod */
 static const u8 init_tab[] = {
-	0x00, 0x00, /* Stop aquisition */
+	0x00, 0x00, /* Stop acquisition */
 	0x0B, 0x06,
 	0x09, 0x01,
 	0x0D, 0x41,
@@ -310,7 +310,7 @@
 			& 0xfc);
 		cx22702_writereg(state, 0x0C,
 			(cx22702_readreg(state, 0x0C) & 0xBF) | 0x40);
-		cx22702_writereg(state, 0x00, 0x01); /* Begin aquisition */
+		cx22702_writereg(state, 0x00, 0x01); /* Begin acquisition */
 		dprintk("%s: Autodetecting\n", __func__);
 		return 0;
 	}
@@ -424,7 +424,7 @@
 	cx22702_writereg(state, 0x0C,
 		(cx22702_readreg(state, 0x0C) & 0xBF) | 0x40);
 
-	/* Begin channel aquisition */
+	/* Begin channel acquisition */
 	cx22702_writereg(state, 0x00, 0x01);
 
 	return 0;
diff --git a/drivers/media/dvb/frontends/cx24110.c b/drivers/media/dvb/frontends/cx24110.c
index 7a1a5bc..bf9c999 100644
--- a/drivers/media/dvb/frontends/cx24110.c
+++ b/drivers/media/dvb/frontends/cx24110.c
@@ -544,7 +544,7 @@
 	cx24110_set_inversion (state, p->inversion);
 	cx24110_set_fec (state, p->u.qpsk.fec_inner);
 	cx24110_set_symbolrate (state, p->u.qpsk.symbol_rate);
-	cx24110_writereg(state,0x04,0x05); /* start aquisition */
+	cx24110_writereg(state,0x04,0x05); /* start acquisition */
 
 	return 0;
 }
diff --git a/drivers/media/dvb/frontends/cx24113.h b/drivers/media/dvb/frontends/cx24113.h
index 5de0f7f..01eb7b9 100644
--- a/drivers/media/dvb/frontends/cx24113.h
+++ b/drivers/media/dvb/frontends/cx24113.h
@@ -1,5 +1,5 @@
 /*
- *  Driver for Conexant CX24113/CX24128 Tuner (Satelite)
+ *  Driver for Conexant CX24113/CX24128 Tuner (Satellite)
  *
  *  Copyright (C) 2007-8 Patrick Boettcher <pb@linuxtv.org>
  *
diff --git a/drivers/media/dvb/frontends/cx24123.c b/drivers/media/dvb/frontends/cx24123.c
index fad6a99..b1dd8ac 100644
--- a/drivers/media/dvb/frontends/cx24123.c
+++ b/drivers/media/dvb/frontends/cx24123.c
@@ -949,7 +949,7 @@
 	else
 		err("it seems I don't have a tuner...");
 
-	/* Enable automatic aquisition and reset cycle */
+	/* Enable automatic acquisition and reset cycle */
 	cx24123_writereg(state, 0x03, (cx24123_readreg(state, 0x03) | 0x07));
 	cx24123_writereg(state, 0x00, 0x10);
 	cx24123_writereg(state, 0x00, 0);
diff --git a/drivers/media/dvb/frontends/drx397xD.c b/drivers/media/dvb/frontends/drx397xD.c
index a05007c..536f02b 100644
--- a/drivers/media/dvb/frontends/drx397xD.c
+++ b/drivers/media/dvb/frontends/drx397xD.c
@@ -1097,7 +1097,7 @@
 	s->config.ifagc.w0A = 0x3ff;
 	s->config.ifagc.w0C = 0x388;
 
-	/* for signal strenght calculations */
+	/* for signal strength calculations */
 	s->config.ss76 = 820;
 	s->config.ss78 = 2200;
 	s->config.ss7A = 150;
diff --git a/drivers/media/dvb/frontends/mb86a16.c b/drivers/media/dvb/frontends/mb86a16.c
index 33b6323..c283112 100644
--- a/drivers/media/dvb/frontends/mb86a16.c
+++ b/drivers/media/dvb/frontends/mb86a16.c
@@ -1630,7 +1630,7 @@
 	state->srate = p->u.qpsk.symbol_rate / 1000;
 
 	if (!mb86a16_set_fe(state)) {
-		dprintk(verbose, MB86A16_ERROR, 1, "Succesfully acquired LOCK");
+		dprintk(verbose, MB86A16_ERROR, 1, "Successfully acquired LOCK");
 		return DVBFE_ALGO_SEARCH_SUCCESS;
 	}
 
diff --git a/drivers/media/dvb/frontends/mb86a20s.c b/drivers/media/dvb/frontends/mb86a20s.c
index cc4acd2..0f867a5 100644
--- a/drivers/media/dvb/frontends/mb86a20s.c
+++ b/drivers/media/dvb/frontends/mb86a20s.c
@@ -406,7 +406,7 @@
 		printk(KERN_INFO "mb86a20s: Init failed. Will try again later\n");
 	} else {
 		state->need_init = false;
-		dprintk("Initialization succeded.\n");
+		dprintk("Initialization succeeded.\n");
 	}
 	return rc;
 }
diff --git a/drivers/media/dvb/frontends/mt312.c b/drivers/media/dvb/frontends/mt312.c
index 472907d..83e6f1a 100644
--- a/drivers/media/dvb/frontends/mt312.c
+++ b/drivers/media/dvb/frontends/mt312.c
@@ -670,7 +670,7 @@
 		if (ret < 0)
 			goto error;
 
-		/* preserve this bit to not accidently shutdown ADC */
+		/* preserve this bit to not accidentally shutdown ADC */
 		val &= 0x80;
 		break;
 	}
diff --git a/drivers/media/dvb/frontends/s5h1420.c b/drivers/media/dvb/frontends/s5h1420.c
index e87b747..17f8cdf 100644
--- a/drivers/media/dvb/frontends/s5h1420.c
+++ b/drivers/media/dvb/frontends/s5h1420.c
@@ -225,7 +225,7 @@
 	unsigned long timeout;
 	int result = 0;
 
-	/* setup for DISEQC recieve */
+	/* setup for DISEQC receive */
 	val = s5h1420_readreg(state, 0x3b);
 	s5h1420_writereg(state, 0x3b, 0x82); /* FIXME: guess - do we need to set DIS_RDY(0x08) in receive mode? */
 	msleep(15);
diff --git a/drivers/media/dvb/frontends/stb6100.c b/drivers/media/dvb/frontends/stb6100.c
index 64673b8..bc1a8af 100644
--- a/drivers/media/dvb/frontends/stb6100.c
+++ b/drivers/media/dvb/frontends/stb6100.c
@@ -360,7 +360,7 @@
 	else
 		odiv = 0;
 
-	/* VCO enabled, seach clock off as per LL3.7, 3.4.1 */
+	/* VCO enabled, search clock off as per LL3.7, 3.4.1 */
 	regs[STB6100_VCO] = 0xe0 | (odiv << STB6100_VCO_ODIV_SHIFT);
 
 	/* OSM	*/
diff --git a/drivers/media/dvb/frontends/stv0297.c b/drivers/media/dvb/frontends/stv0297.c
index 4fd7479..84d88f33 100644
--- a/drivers/media/dvb/frontends/stv0297.c
+++ b/drivers/media/dvb/frontends/stv0297.c
@@ -435,7 +435,7 @@
 		return -EINVAL;
 	}
 
-	// determine inversion dependant parameters
+	// determine inversion dependent parameters
 	inversion = p->inversion;
 	if (state->config->invert)
 		inversion = (inversion == INVERSION_ON) ? INVERSION_OFF : INVERSION_ON;
diff --git a/drivers/media/dvb/frontends/stv0367.c b/drivers/media/dvb/frontends/stv0367.c
index 4e0e6a8..e57ab53 100644
--- a/drivers/media/dvb/frontends/stv0367.c
+++ b/drivers/media/dvb/frontends/stv0367.c
@@ -1328,7 +1328,7 @@
 
 	/*guard=stv0367_readbits(state,F367TER_SYR_GUARD); */
 
-	/*supress EPQ auto for SYR_GARD 1/16 or 1/32
+	/*suppress EPQ auto for SYR_GARD 1/16 or 1/32
 	and set channel predictor in automatic */
 #if 0
 	switch (guard) {
diff --git a/drivers/media/dvb/frontends/stv0900_priv.h b/drivers/media/dvb/frontends/stv0900_priv.h
index b62b0f0..e0ea74c 100644
--- a/drivers/media/dvb/frontends/stv0900_priv.h
+++ b/drivers/media/dvb/frontends/stv0900_priv.h
@@ -238,7 +238,7 @@
 };
 
 struct stv0900_init_params{
-	u32	dmd_ref_clk;/* Refrence,Input clock for the demod in Hz */
+	u32	dmd_ref_clk;/* Reference,Input clock for the demod in Hz */
 
 	/* Demodulator Type (single demod or dual demod) */
 	enum fe_stv0900_demod_mode	demod_mode;
diff --git a/drivers/media/dvb/frontends/stv090x.c b/drivers/media/dvb/frontends/stv090x.c
index 41d0f0a..52d8712 100644
--- a/drivers/media/dvb/frontends/stv090x.c
+++ b/drivers/media/dvb/frontends/stv090x.c
@@ -1424,7 +1424,7 @@
 			if (STV090x_WRITE_DEMOD(state, CFRLOW0, 0x00) < 0)
 				goto err;
 
-			/*enlarge the timing bandwith for Low SR*/
+			/*enlarge the timing bandwidth for Low SR*/
 			if (STV090x_WRITE_DEMOD(state, RTCS2, 0x68) < 0)
 				goto err;
 		} else {
@@ -1432,17 +1432,17 @@
 			Set The carrier search up and low to auto mode */
 			if (STV090x_WRITE_DEMOD(state, CARCFG, 0xc4) < 0)
 				goto err;
-			/*reduce the timing bandwith for high SR*/
+			/*reduce the timing bandwidth for high SR*/
 			if (STV090x_WRITE_DEMOD(state, RTCS2, 0x44) < 0)
 				goto err;
 		}
 	} else {
 		/* >= Cut 3 */
 		if (state->srate <= 5000000) {
-			/* enlarge the timing bandwith for Low SR */
+			/* enlarge the timing bandwidth for Low SR */
 			STV090x_WRITE_DEMOD(state, RTCS2, 0x68);
 		} else {
-			/* reduce timing bandwith for high SR */
+			/* reduce timing bandwidth for high SR */
 			STV090x_WRITE_DEMOD(state, RTCS2, 0x44);
 		}
 
@@ -2482,7 +2482,7 @@
 					dvbs2_fly_wheel = STV090x_GETFIELD_Px(reg, FLYWHEEL_CPT_FIELD);
 				}
 				if (dvbs2_fly_wheel < 0xd) {
-					/*FALSE lock, The demod is loosing lock */
+					/*FALSE lock, The demod is losing lock */
 					lock = 0;
 					if (trials < 2) {
 						if (state->internal->dev_ver >= 0x20) {
@@ -3202,7 +3202,7 @@
 			goto err;
 		if (STV090x_WRITE_DEMOD(state, CORRELMANT, 0x70) < 0)
 			goto err;
-		if (stv090x_set_srate(state, 1000000) < 0) /* inital srate = 1Msps */
+		if (stv090x_set_srate(state, 1000000) < 0) /* initial srate = 1Msps */
 			goto err;
 	} else {
 		/* known srate */