| /* |
| * This file is part of wl1271 |
| * |
| * Copyright (C) 2009 Nokia Corporation |
| * |
| * Contact: Luciano Coelho <luciano.coelho@nokia.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| * 02110-1301 USA |
| * |
| */ |
| |
| #include "wl1271.h" |
| #include "wl1271_acx.h" |
| #include "wl1271_reg.h" |
| #include "wl1271_rx.h" |
| #include "wl1271_spi.h" |
| |
| static u8 wl1271_rx_get_mem_block(struct wl1271_fw_status *status, |
| u32 drv_rx_counter) |
| { |
| return status->rx_pkt_descs[drv_rx_counter] & RX_MEM_BLOCK_MASK; |
| } |
| |
| static u32 wl1271_rx_get_buf_size(struct wl1271_fw_status *status, |
| u32 drv_rx_counter) |
| { |
| return (status->rx_pkt_descs[drv_rx_counter] & RX_BUF_SIZE_MASK) >> |
| RX_BUF_SIZE_SHIFT_DIV; |
| } |
| |
| /* The values of this table must match the wl1271_rates[] array */ |
| static u8 wl1271_rx_rate_to_idx[] = { |
| /* MCS rates are used only with 11n */ |
| WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS7 */ |
| WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS6 */ |
| WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS5 */ |
| WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS4 */ |
| WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS3 */ |
| WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS2 */ |
| WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS1 */ |
| WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS0 */ |
| |
| 11, /* WL1271_RATE_54 */ |
| 10, /* WL1271_RATE_48 */ |
| 9, /* WL1271_RATE_36 */ |
| 8, /* WL1271_RATE_24 */ |
| |
| /* TI-specific rate */ |
| WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_22 */ |
| |
| 7, /* WL1271_RATE_18 */ |
| 6, /* WL1271_RATE_12 */ |
| 3, /* WL1271_RATE_11 */ |
| 5, /* WL1271_RATE_9 */ |
| 4, /* WL1271_RATE_6 */ |
| 2, /* WL1271_RATE_5_5 */ |
| 1, /* WL1271_RATE_2 */ |
| 0 /* WL1271_RATE_1 */ |
| }; |
| |
| static void wl1271_rx_status(struct wl1271 *wl, |
| struct wl1271_rx_descriptor *desc, |
| struct ieee80211_rx_status *status, |
| u8 beacon) |
| { |
| memset(status, 0, sizeof(struct ieee80211_rx_status)); |
| |
| if ((desc->flags & WL1271_RX_DESC_BAND_MASK) == WL1271_RX_DESC_BAND_BG) |
| status->band = IEEE80211_BAND_2GHZ; |
| else |
| wl1271_warning("unsupported band 0x%x", |
| desc->flags & WL1271_RX_DESC_BAND_MASK); |
| |
| /* |
| * FIXME: Add mactime handling. For IBSS (ad-hoc) we need to get the |
| * timestamp from the beacon (acx_tsf_info). In BSS mode (infra) we |
| * only need the mactime for monitor mode. For now the mactime is |
| * not valid, so RX_FLAG_TSFT should not be set |
| */ |
| status->signal = desc->rssi; |
| |
| /* |
| * FIXME: In wl1251, the SNR should be divided by two. In wl1271 we |
| * need to divide by two for now, but TI has been discussing about |
| * changing it. This needs to be rechecked. |
| */ |
| status->noise = desc->rssi - (desc->snr >> 1); |
| |
| status->freq = ieee80211_channel_to_frequency(desc->channel); |
| |
| if (desc->flags & WL1271_RX_DESC_ENCRYPT_MASK) { |
| status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED; |
| |
| if (likely(!(desc->flags & WL1271_RX_DESC_DECRYPT_FAIL))) |
| status->flag |= RX_FLAG_DECRYPTED; |
| |
| if (unlikely(desc->flags & WL1271_RX_DESC_MIC_FAIL)) |
| status->flag |= RX_FLAG_MMIC_ERROR; |
| } |
| |
| status->rate_idx = wl1271_rx_rate_to_idx[desc->rate]; |
| |
| if (status->rate_idx == WL1271_RX_RATE_UNSUPPORTED) |
| wl1271_warning("unsupported rate"); |
| } |
| |
| static void wl1271_rx_handle_data(struct wl1271 *wl, u32 length) |
| { |
| struct ieee80211_rx_status rx_status; |
| struct wl1271_rx_descriptor *desc; |
| struct sk_buff *skb; |
| u16 *fc; |
| u8 *buf; |
| u8 beacon = 0; |
| |
| skb = dev_alloc_skb(length); |
| if (!skb) { |
| wl1271_error("Couldn't allocate RX frame"); |
| return; |
| } |
| |
| buf = skb_put(skb, length); |
| wl1271_spi_reg_read(wl, WL1271_SLV_MEM_DATA, buf, length, true); |
| |
| /* the data read starts with the descriptor */ |
| desc = (struct wl1271_rx_descriptor *) buf; |
| |
| /* now we pull the descriptor out of the buffer */ |
| skb_pull(skb, sizeof(*desc)); |
| |
| fc = (u16 *)skb->data; |
| if ((*fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_BEACON) |
| beacon = 1; |
| |
| wl1271_rx_status(wl, desc, &rx_status, beacon); |
| |
| wl1271_debug(DEBUG_RX, "rx skb 0x%p: %d B %s", skb, skb->len, |
| beacon ? "beacon" : ""); |
| |
| memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status)); |
| ieee80211_rx(wl->hw, skb); |
| } |
| |
| void wl1271_rx(struct wl1271 *wl, struct wl1271_fw_status *status) |
| { |
| struct wl1271_acx_mem_map *wl_mem_map = wl->target_mem_map; |
| u32 buf_size; |
| u32 fw_rx_counter = status->fw_rx_counter & NUM_RX_PKT_DESC_MOD_MASK; |
| u32 drv_rx_counter = wl->rx_counter & NUM_RX_PKT_DESC_MOD_MASK; |
| u32 mem_block; |
| |
| while (drv_rx_counter != fw_rx_counter) { |
| mem_block = wl1271_rx_get_mem_block(status, drv_rx_counter); |
| buf_size = wl1271_rx_get_buf_size(status, drv_rx_counter); |
| |
| if (buf_size == 0) { |
| wl1271_warning("received empty data"); |
| break; |
| } |
| |
| wl->rx_mem_pool_addr.addr = |
| (mem_block << 8) + wl_mem_map->packet_memory_pool_start; |
| wl->rx_mem_pool_addr.addr_extra = |
| wl->rx_mem_pool_addr.addr + 4; |
| |
| /* Choose the block we want to read */ |
| wl1271_spi_reg_write(wl, WL1271_SLV_REG_DATA, |
| &wl->rx_mem_pool_addr, |
| sizeof(wl->rx_mem_pool_addr), false); |
| |
| wl1271_rx_handle_data(wl, buf_size); |
| |
| wl->rx_counter++; |
| drv_rx_counter = wl->rx_counter & NUM_RX_PKT_DESC_MOD_MASK; |
| } |
| |
| wl1271_reg_write32(wl, RX_DRIVER_COUNTER_ADDRESS, wl->rx_counter); |
| |
| /* This is a workaround for some problems in the chip */ |
| wl1271_reg_write32(wl, RX_DRIVER_DUMMY_WRITE_ADDRESS, 0x1); |
| |
| } |