mlxsw: reg: Add Shared Buffer Status register definition
This register allows to query HW for current and maximal buffer usage.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
index fce5a96..656466a 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -3722,6 +3722,104 @@
mlxsw_reg_sbmm_pool_set(payload, pool);
}
+/* SBSR - Shared Buffer Status Register
+ * ------------------------------------
+ * The SBSR register retrieves the shared buffer occupancy according to
+ * Port-Pool. Note that this register enables reading a large amount of data.
+ * It is the user's responsibility to limit the amount of data to ensure the
+ * response can match the maximum transfer unit. In case the response exceeds
+ * the maximum transport unit, it will be truncated with no special notice.
+ */
+#define MLXSW_REG_SBSR_ID 0xB005
+#define MLXSW_REG_SBSR_BASE_LEN 0x5C /* base length, without records */
+#define MLXSW_REG_SBSR_REC_LEN 0x8 /* record length */
+#define MLXSW_REG_SBSR_REC_MAX_COUNT 120
+#define MLXSW_REG_SBSR_LEN (MLXSW_REG_SBSR_BASE_LEN + \
+ MLXSW_REG_SBSR_REC_LEN * \
+ MLXSW_REG_SBSR_REC_MAX_COUNT)
+
+static const struct mlxsw_reg_info mlxsw_reg_sbsr = {
+ .id = MLXSW_REG_SBSR_ID,
+ .len = MLXSW_REG_SBSR_LEN,
+};
+
+/* reg_sbsr_clr
+ * Clear Max Buffer Occupancy. When this bit is set, the max_buff_occupancy
+ * field is cleared (and a new max value is tracked from the time the clear
+ * was performed).
+ * Access: OP
+ */
+MLXSW_ITEM32(reg, sbsr, clr, 0x00, 31, 1);
+
+/* reg_sbsr_ingress_port_mask
+ * Bit vector for all ingress network ports.
+ * Indicates which of the ports (for which the relevant bit is set)
+ * are affected by the set operation. Configuration of any other port
+ * does not change.
+ * Access: Index
+ */
+MLXSW_ITEM_BIT_ARRAY(reg, sbsr, ingress_port_mask, 0x10, 0x20, 1);
+
+/* reg_sbsr_pg_buff_mask
+ * Bit vector for all switch priority groups.
+ * Indicates which of the priorities (for which the relevant bit is set)
+ * are affected by the set operation. Configuration of any other priority
+ * does not change.
+ * Range is 0..cap_max_pg_buffers - 1
+ * Access: Index
+ */
+MLXSW_ITEM_BIT_ARRAY(reg, sbsr, pg_buff_mask, 0x30, 0x4, 1);
+
+/* reg_sbsr_egress_port_mask
+ * Bit vector for all egress network ports.
+ * Indicates which of the ports (for which the relevant bit is set)
+ * are affected by the set operation. Configuration of any other port
+ * does not change.
+ * Access: Index
+ */
+MLXSW_ITEM_BIT_ARRAY(reg, sbsr, egress_port_mask, 0x34, 0x20, 1);
+
+/* reg_sbsr_tclass_mask
+ * Bit vector for all traffic classes.
+ * Indicates which of the traffic classes (for which the relevant bit is
+ * set) are affected by the set operation. Configuration of any other
+ * traffic class does not change.
+ * Range is 0..cap_max_tclass - 1
+ * Access: Index
+ */
+MLXSW_ITEM_BIT_ARRAY(reg, sbsr, tclass_mask, 0x54, 0x8, 1);
+
+static inline void mlxsw_reg_sbsr_pack(char *payload, bool clr)
+{
+ MLXSW_REG_ZERO(sbsr, payload);
+ mlxsw_reg_sbsr_clr_set(payload, clr);
+}
+
+/* reg_sbsr_rec_buff_occupancy
+ * Current buffer occupancy in cells.
+ * Access: RO
+ */
+MLXSW_ITEM32_INDEXED(reg, sbsr, rec_buff_occupancy, MLXSW_REG_SBSR_BASE_LEN,
+ 0, 24, MLXSW_REG_SBSR_REC_LEN, 0x00, false);
+
+/* reg_sbsr_rec_max_buff_occupancy
+ * Maximum value of buffer occupancy in cells monitored. Cleared by
+ * writing to the clr field.
+ * Access: RO
+ */
+MLXSW_ITEM32_INDEXED(reg, sbsr, rec_max_buff_occupancy, MLXSW_REG_SBSR_BASE_LEN,
+ 0, 24, MLXSW_REG_SBSR_REC_LEN, 0x04, false);
+
+static inline void mlxsw_reg_sbsr_rec_unpack(char *payload, int rec_index,
+ u32 *p_buff_occupancy,
+ u32 *p_max_buff_occupancy)
+{
+ *p_buff_occupancy =
+ mlxsw_reg_sbsr_rec_buff_occupancy_get(payload, rec_index);
+ *p_max_buff_occupancy =
+ mlxsw_reg_sbsr_rec_max_buff_occupancy_get(payload, rec_index);
+}
+
static inline const char *mlxsw_reg_id_str(u16 reg_id)
{
switch (reg_id) {
@@ -3817,6 +3915,8 @@
return "SBPM";
case MLXSW_REG_SBMM_ID:
return "SBMM";
+ case MLXSW_REG_SBSR_ID:
+ return "SBSR";
default:
return "*UNKNOWN*";
}