| /* linux/drivers/char/watchdog/s3c2410_wdt.c |
| * |
| * Copyright (c) 2004 Simtec Electronics |
| * Ben Dooks <ben@simtec.co.uk> |
| * |
| * S3C2410 Watchdog Timer Support |
| * |
| * Based on, softdog.c by Alan Cox, |
| * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/types.h> |
| #include <linux/timer.h> |
| #include <linux/watchdog.h> |
| #include <linux/platform_device.h> |
| #include <linux/interrupt.h> |
| #include <linux/clk.h> |
| #include <linux/uaccess.h> |
| #include <linux/io.h> |
| #include <linux/cpufreq.h> |
| #include <linux/slab.h> |
| #include <linux/err.h> |
| #include <linux/of.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/regmap.h> |
| #include <linux/reboot.h> |
| #include <linux/delay.h> |
| |
| #define S3C2410_WTCON 0x00 |
| #define S3C2410_WTDAT 0x04 |
| #define S3C2410_WTCNT 0x08 |
| |
| #define S3C2410_WTCON_RSTEN (1 << 0) |
| #define S3C2410_WTCON_INTEN (1 << 2) |
| #define S3C2410_WTCON_ENABLE (1 << 5) |
| |
| #define S3C2410_WTCON_DIV16 (0 << 3) |
| #define S3C2410_WTCON_DIV32 (1 << 3) |
| #define S3C2410_WTCON_DIV64 (2 << 3) |
| #define S3C2410_WTCON_DIV128 (3 << 3) |
| |
| #define S3C2410_WTCON_PRESCALE(x) ((x) << 8) |
| #define S3C2410_WTCON_PRESCALE_MASK (0xff << 8) |
| |
| #define CONFIG_S3C2410_WATCHDOG_ATBOOT (0) |
| #define CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME (15) |
| |
| #define EXYNOS5_RST_STAT_REG_OFFSET 0x0404 |
| #define EXYNOS5_WDT_DISABLE_REG_OFFSET 0x0408 |
| #define EXYNOS5_WDT_MASK_RESET_REG_OFFSET 0x040c |
| #define QUIRK_HAS_PMU_CONFIG (1 << 0) |
| #define QUIRK_HAS_RST_STAT (1 << 1) |
| |
| /* These quirks require that we have a PMU register map */ |
| #define QUIRKS_HAVE_PMUREG (QUIRK_HAS_PMU_CONFIG | \ |
| QUIRK_HAS_RST_STAT) |
| |
| static bool nowayout = WATCHDOG_NOWAYOUT; |
| static int tmr_margin; |
| static int tmr_atboot = CONFIG_S3C2410_WATCHDOG_ATBOOT; |
| static int soft_noboot; |
| static int debug; |
| |
| module_param(tmr_margin, int, 0); |
| module_param(tmr_atboot, int, 0); |
| module_param(nowayout, bool, 0); |
| module_param(soft_noboot, int, 0); |
| module_param(debug, int, 0); |
| |
| MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. (default=" |
| __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME) ")"); |
| MODULE_PARM_DESC(tmr_atboot, |
| "Watchdog is started at boot time if set to 1, default=" |
| __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_ATBOOT)); |
| MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" |
| __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); |
| MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, " |
| "0 to reboot (default 0)"); |
| MODULE_PARM_DESC(debug, "Watchdog debug, set to >1 for debug (default 0)"); |
| |
| /** |
| * struct s3c2410_wdt_variant - Per-variant config data |
| * |
| * @disable_reg: Offset in pmureg for the register that disables the watchdog |
| * timer reset functionality. |
| * @mask_reset_reg: Offset in pmureg for the register that masks the watchdog |
| * timer reset functionality. |
| * @mask_bit: Bit number for the watchdog timer in the disable register and the |
| * mask reset register. |
| * @rst_stat_reg: Offset in pmureg for the register that has the reset status. |
| * @rst_stat_bit: Bit number in the rst_stat register indicating a watchdog |
| * reset. |
| * @quirks: A bitfield of quirks. |
| */ |
| |
| struct s3c2410_wdt_variant { |
| int disable_reg; |
| int mask_reset_reg; |
| int mask_bit; |
| int rst_stat_reg; |
| int rst_stat_bit; |
| u32 quirks; |
| }; |
| |
| struct s3c2410_wdt { |
| struct device *dev; |
| struct clk *clock; |
| void __iomem *reg_base; |
| unsigned int count; |
| spinlock_t lock; |
| unsigned long wtcon_save; |
| unsigned long wtdat_save; |
| struct watchdog_device wdt_device; |
| struct notifier_block freq_transition; |
| struct notifier_block restart_handler; |
| struct s3c2410_wdt_variant *drv_data; |
| struct regmap *pmureg; |
| }; |
| |
| static const struct s3c2410_wdt_variant drv_data_s3c2410 = { |
| .quirks = 0 |
| }; |
| |
| #ifdef CONFIG_OF |
| static const struct s3c2410_wdt_variant drv_data_exynos5250 = { |
| .disable_reg = EXYNOS5_WDT_DISABLE_REG_OFFSET, |
| .mask_reset_reg = EXYNOS5_WDT_MASK_RESET_REG_OFFSET, |
| .mask_bit = 20, |
| .rst_stat_reg = EXYNOS5_RST_STAT_REG_OFFSET, |
| .rst_stat_bit = 20, |
| .quirks = QUIRK_HAS_PMU_CONFIG | QUIRK_HAS_RST_STAT, |
| }; |
| |
| static const struct s3c2410_wdt_variant drv_data_exynos5420 = { |
| .disable_reg = EXYNOS5_WDT_DISABLE_REG_OFFSET, |
| .mask_reset_reg = EXYNOS5_WDT_MASK_RESET_REG_OFFSET, |
| .mask_bit = 0, |
| .rst_stat_reg = EXYNOS5_RST_STAT_REG_OFFSET, |
| .rst_stat_bit = 9, |
| .quirks = QUIRK_HAS_PMU_CONFIG | QUIRK_HAS_RST_STAT, |
| }; |
| |
| static const struct s3c2410_wdt_variant drv_data_exynos7 = { |
| .disable_reg = EXYNOS5_WDT_DISABLE_REG_OFFSET, |
| .mask_reset_reg = EXYNOS5_WDT_MASK_RESET_REG_OFFSET, |
| .mask_bit = 23, |
| .rst_stat_reg = EXYNOS5_RST_STAT_REG_OFFSET, |
| .rst_stat_bit = 23, /* A57 WDTRESET */ |
| .quirks = QUIRK_HAS_PMU_CONFIG | QUIRK_HAS_RST_STAT, |
| }; |
| |
| static const struct of_device_id s3c2410_wdt_match[] = { |
| { .compatible = "samsung,s3c2410-wdt", |
| .data = &drv_data_s3c2410 }, |
| { .compatible = "samsung,exynos5250-wdt", |
| .data = &drv_data_exynos5250 }, |
| { .compatible = "samsung,exynos5420-wdt", |
| .data = &drv_data_exynos5420 }, |
| { .compatible = "samsung,exynos7-wdt", |
| .data = &drv_data_exynos7 }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, s3c2410_wdt_match); |
| #endif |
| |
| static const struct platform_device_id s3c2410_wdt_ids[] = { |
| { |
| .name = "s3c2410-wdt", |
| .driver_data = (unsigned long)&drv_data_s3c2410, |
| }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(platform, s3c2410_wdt_ids); |
| |
| /* watchdog control routines */ |
| |
| #define DBG(fmt, ...) \ |
| do { \ |
| if (debug) \ |
| pr_info(fmt, ##__VA_ARGS__); \ |
| } while (0) |
| |
| /* functions */ |
| |
| static inline struct s3c2410_wdt *freq_to_wdt(struct notifier_block *nb) |
| { |
| return container_of(nb, struct s3c2410_wdt, freq_transition); |
| } |
| |
| static int s3c2410wdt_mask_and_disable_reset(struct s3c2410_wdt *wdt, bool mask) |
| { |
| int ret; |
| u32 mask_val = 1 << wdt->drv_data->mask_bit; |
| u32 val = 0; |
| |
| /* No need to do anything if no PMU CONFIG needed */ |
| if (!(wdt->drv_data->quirks & QUIRK_HAS_PMU_CONFIG)) |
| return 0; |
| |
| if (mask) |
| val = mask_val; |
| |
| ret = regmap_update_bits(wdt->pmureg, |
| wdt->drv_data->disable_reg, |
| mask_val, val); |
| if (ret < 0) |
| goto error; |
| |
| ret = regmap_update_bits(wdt->pmureg, |
| wdt->drv_data->mask_reset_reg, |
| mask_val, val); |
| error: |
| if (ret < 0) |
| dev_err(wdt->dev, "failed to update reg(%d)\n", ret); |
| |
| return ret; |
| } |
| |
| static int s3c2410wdt_keepalive(struct watchdog_device *wdd) |
| { |
| struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd); |
| |
| spin_lock(&wdt->lock); |
| writel(wdt->count, wdt->reg_base + S3C2410_WTCNT); |
| spin_unlock(&wdt->lock); |
| |
| return 0; |
| } |
| |
| static void __s3c2410wdt_stop(struct s3c2410_wdt *wdt) |
| { |
| unsigned long wtcon; |
| |
| wtcon = readl(wdt->reg_base + S3C2410_WTCON); |
| wtcon &= ~(S3C2410_WTCON_ENABLE | S3C2410_WTCON_RSTEN); |
| writel(wtcon, wdt->reg_base + S3C2410_WTCON); |
| } |
| |
| static int s3c2410wdt_stop(struct watchdog_device *wdd) |
| { |
| struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd); |
| |
| spin_lock(&wdt->lock); |
| __s3c2410wdt_stop(wdt); |
| spin_unlock(&wdt->lock); |
| |
| return 0; |
| } |
| |
| static int s3c2410wdt_start(struct watchdog_device *wdd) |
| { |
| unsigned long wtcon; |
| struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd); |
| |
| spin_lock(&wdt->lock); |
| |
| __s3c2410wdt_stop(wdt); |
| |
| wtcon = readl(wdt->reg_base + S3C2410_WTCON); |
| wtcon |= S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128; |
| |
| if (soft_noboot) { |
| wtcon |= S3C2410_WTCON_INTEN; |
| wtcon &= ~S3C2410_WTCON_RSTEN; |
| } else { |
| wtcon &= ~S3C2410_WTCON_INTEN; |
| wtcon |= S3C2410_WTCON_RSTEN; |
| } |
| |
| DBG("%s: count=0x%08x, wtcon=%08lx\n", |
| __func__, wdt->count, wtcon); |
| |
| writel(wdt->count, wdt->reg_base + S3C2410_WTDAT); |
| writel(wdt->count, wdt->reg_base + S3C2410_WTCNT); |
| writel(wtcon, wdt->reg_base + S3C2410_WTCON); |
| spin_unlock(&wdt->lock); |
| |
| return 0; |
| } |
| |
| static inline int s3c2410wdt_is_running(struct s3c2410_wdt *wdt) |
| { |
| return readl(wdt->reg_base + S3C2410_WTCON) & S3C2410_WTCON_ENABLE; |
| } |
| |
| static int s3c2410wdt_set_heartbeat(struct watchdog_device *wdd, unsigned timeout) |
| { |
| struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd); |
| unsigned long freq = clk_get_rate(wdt->clock); |
| unsigned int count; |
| unsigned int divisor = 1; |
| unsigned long wtcon; |
| |
| if (timeout < 1) |
| return -EINVAL; |
| |
| freq = DIV_ROUND_UP(freq, 128); |
| count = timeout * freq; |
| |
| DBG("%s: count=%d, timeout=%d, freq=%lu\n", |
| __func__, count, timeout, freq); |
| |
| /* if the count is bigger than the watchdog register, |
| then work out what we need to do (and if) we can |
| actually make this value |
| */ |
| |
| if (count >= 0x10000) { |
| divisor = DIV_ROUND_UP(count, 0xffff); |
| |
| if (divisor > 0x100) { |
| dev_err(wdt->dev, "timeout %d too big\n", timeout); |
| return -EINVAL; |
| } |
| } |
| |
| DBG("%s: timeout=%d, divisor=%d, count=%d (%08x)\n", |
| __func__, timeout, divisor, count, DIV_ROUND_UP(count, divisor)); |
| |
| count = DIV_ROUND_UP(count, divisor); |
| wdt->count = count; |
| |
| /* update the pre-scaler */ |
| wtcon = readl(wdt->reg_base + S3C2410_WTCON); |
| wtcon &= ~S3C2410_WTCON_PRESCALE_MASK; |
| wtcon |= S3C2410_WTCON_PRESCALE(divisor-1); |
| |
| writel(count, wdt->reg_base + S3C2410_WTDAT); |
| writel(wtcon, wdt->reg_base + S3C2410_WTCON); |
| |
| wdd->timeout = (count * divisor) / freq; |
| |
| return 0; |
| } |
| |
| #define OPTIONS (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE) |
| |
| static const struct watchdog_info s3c2410_wdt_ident = { |
| .options = OPTIONS, |
| .firmware_version = 0, |
| .identity = "S3C2410 Watchdog", |
| }; |
| |
| static struct watchdog_ops s3c2410wdt_ops = { |
| .owner = THIS_MODULE, |
| .start = s3c2410wdt_start, |
| .stop = s3c2410wdt_stop, |
| .ping = s3c2410wdt_keepalive, |
| .set_timeout = s3c2410wdt_set_heartbeat, |
| }; |
| |
| static struct watchdog_device s3c2410_wdd = { |
| .info = &s3c2410_wdt_ident, |
| .ops = &s3c2410wdt_ops, |
| .timeout = CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME, |
| }; |
| |
| /* interrupt handler code */ |
| |
| static irqreturn_t s3c2410wdt_irq(int irqno, void *param) |
| { |
| struct s3c2410_wdt *wdt = platform_get_drvdata(param); |
| |
| dev_info(wdt->dev, "watchdog timer expired (irq)\n"); |
| |
| s3c2410wdt_keepalive(&wdt->wdt_device); |
| return IRQ_HANDLED; |
| } |
| |
| #ifdef CONFIG_ARM_S3C24XX_CPUFREQ |
| |
| static int s3c2410wdt_cpufreq_transition(struct notifier_block *nb, |
| unsigned long val, void *data) |
| { |
| int ret; |
| struct s3c2410_wdt *wdt = freq_to_wdt(nb); |
| |
| if (!s3c2410wdt_is_running(wdt)) |
| goto done; |
| |
| if (val == CPUFREQ_PRECHANGE) { |
| /* To ensure that over the change we don't cause the |
| * watchdog to trigger, we perform an keep-alive if |
| * the watchdog is running. |
| */ |
| |
| s3c2410wdt_keepalive(&wdt->wdt_device); |
| } else if (val == CPUFREQ_POSTCHANGE) { |
| s3c2410wdt_stop(&wdt->wdt_device); |
| |
| ret = s3c2410wdt_set_heartbeat(&wdt->wdt_device, |
| wdt->wdt_device.timeout); |
| |
| if (ret >= 0) |
| s3c2410wdt_start(&wdt->wdt_device); |
| else |
| goto err; |
| } |
| |
| done: |
| return 0; |
| |
| err: |
| dev_err(wdt->dev, "cannot set new value for timeout %d\n", |
| wdt->wdt_device.timeout); |
| return ret; |
| } |
| |
| static inline int s3c2410wdt_cpufreq_register(struct s3c2410_wdt *wdt) |
| { |
| wdt->freq_transition.notifier_call = s3c2410wdt_cpufreq_transition; |
| |
| return cpufreq_register_notifier(&wdt->freq_transition, |
| CPUFREQ_TRANSITION_NOTIFIER); |
| } |
| |
| static inline void s3c2410wdt_cpufreq_deregister(struct s3c2410_wdt *wdt) |
| { |
| wdt->freq_transition.notifier_call = s3c2410wdt_cpufreq_transition; |
| |
| cpufreq_unregister_notifier(&wdt->freq_transition, |
| CPUFREQ_TRANSITION_NOTIFIER); |
| } |
| |
| #else |
| |
| static inline int s3c2410wdt_cpufreq_register(struct s3c2410_wdt *wdt) |
| { |
| return 0; |
| } |
| |
| static inline void s3c2410wdt_cpufreq_deregister(struct s3c2410_wdt *wdt) |
| { |
| } |
| #endif |
| |
| static int s3c2410wdt_restart(struct notifier_block *this, |
| unsigned long mode, void *cmd) |
| { |
| struct s3c2410_wdt *wdt = container_of(this, struct s3c2410_wdt, |
| restart_handler); |
| void __iomem *wdt_base = wdt->reg_base; |
| |
| /* disable watchdog, to be safe */ |
| writel(0, wdt_base + S3C2410_WTCON); |
| |
| /* put initial values into count and data */ |
| writel(0x80, wdt_base + S3C2410_WTCNT); |
| writel(0x80, wdt_base + S3C2410_WTDAT); |
| |
| /* set the watchdog to go and reset... */ |
| writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV16 | |
| S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x20), |
| wdt_base + S3C2410_WTCON); |
| |
| /* wait for reset to assert... */ |
| mdelay(500); |
| |
| return NOTIFY_DONE; |
| } |
| |
| static inline unsigned int s3c2410wdt_get_bootstatus(struct s3c2410_wdt *wdt) |
| { |
| unsigned int rst_stat; |
| int ret; |
| |
| if (!(wdt->drv_data->quirks & QUIRK_HAS_RST_STAT)) |
| return 0; |
| |
| ret = regmap_read(wdt->pmureg, wdt->drv_data->rst_stat_reg, &rst_stat); |
| if (ret) |
| dev_warn(wdt->dev, "Couldn't get RST_STAT register\n"); |
| else if (rst_stat & BIT(wdt->drv_data->rst_stat_bit)) |
| return WDIOF_CARDRESET; |
| |
| return 0; |
| } |
| |
| /* s3c2410_get_wdt_driver_data */ |
| static inline struct s3c2410_wdt_variant * |
| get_wdt_drv_data(struct platform_device *pdev) |
| { |
| if (pdev->dev.of_node) { |
| const struct of_device_id *match; |
| match = of_match_node(s3c2410_wdt_match, pdev->dev.of_node); |
| return (struct s3c2410_wdt_variant *)match->data; |
| } else { |
| return (struct s3c2410_wdt_variant *) |
| platform_get_device_id(pdev)->driver_data; |
| } |
| } |
| |
| static int s3c2410wdt_probe(struct platform_device *pdev) |
| { |
| struct device *dev; |
| struct s3c2410_wdt *wdt; |
| struct resource *wdt_mem; |
| struct resource *wdt_irq; |
| unsigned int wtcon; |
| int started = 0; |
| int ret; |
| |
| DBG("%s: probe=%p\n", __func__, pdev); |
| |
| dev = &pdev->dev; |
| |
| wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL); |
| if (!wdt) |
| return -ENOMEM; |
| |
| wdt->dev = &pdev->dev; |
| spin_lock_init(&wdt->lock); |
| wdt->wdt_device = s3c2410_wdd; |
| |
| wdt->drv_data = get_wdt_drv_data(pdev); |
| if (wdt->drv_data->quirks & QUIRKS_HAVE_PMUREG) { |
| wdt->pmureg = syscon_regmap_lookup_by_phandle(dev->of_node, |
| "samsung,syscon-phandle"); |
| if (IS_ERR(wdt->pmureg)) { |
| dev_err(dev, "syscon regmap lookup failed.\n"); |
| return PTR_ERR(wdt->pmureg); |
| } |
| } |
| |
| wdt_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); |
| if (wdt_irq == NULL) { |
| dev_err(dev, "no irq resource specified\n"); |
| ret = -ENOENT; |
| goto err; |
| } |
| |
| /* get the memory region for the watchdog timer */ |
| wdt_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| wdt->reg_base = devm_ioremap_resource(dev, wdt_mem); |
| if (IS_ERR(wdt->reg_base)) { |
| ret = PTR_ERR(wdt->reg_base); |
| goto err; |
| } |
| |
| DBG("probe: mapped reg_base=%p\n", wdt->reg_base); |
| |
| wdt->clock = devm_clk_get(dev, "watchdog"); |
| if (IS_ERR(wdt->clock)) { |
| dev_err(dev, "failed to find watchdog clock source\n"); |
| ret = PTR_ERR(wdt->clock); |
| goto err; |
| } |
| |
| ret = clk_prepare_enable(wdt->clock); |
| if (ret < 0) { |
| dev_err(dev, "failed to enable clock\n"); |
| return ret; |
| } |
| |
| ret = s3c2410wdt_cpufreq_register(wdt); |
| if (ret < 0) { |
| dev_err(dev, "failed to register cpufreq\n"); |
| goto err_clk; |
| } |
| |
| watchdog_set_drvdata(&wdt->wdt_device, wdt); |
| |
| /* see if we can actually set the requested timer margin, and if |
| * not, try the default value */ |
| |
| watchdog_init_timeout(&wdt->wdt_device, tmr_margin, &pdev->dev); |
| ret = s3c2410wdt_set_heartbeat(&wdt->wdt_device, |
| wdt->wdt_device.timeout); |
| if (ret) { |
| started = s3c2410wdt_set_heartbeat(&wdt->wdt_device, |
| CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME); |
| |
| if (started == 0) |
| dev_info(dev, |
| "tmr_margin value out of range, default %d used\n", |
| CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME); |
| else |
| dev_info(dev, "default timer value is out of range, " |
| "cannot start\n"); |
| } |
| |
| ret = devm_request_irq(dev, wdt_irq->start, s3c2410wdt_irq, 0, |
| pdev->name, pdev); |
| if (ret != 0) { |
| dev_err(dev, "failed to install irq (%d)\n", ret); |
| goto err_cpufreq; |
| } |
| |
| watchdog_set_nowayout(&wdt->wdt_device, nowayout); |
| |
| wdt->wdt_device.bootstatus = s3c2410wdt_get_bootstatus(wdt); |
| |
| ret = watchdog_register_device(&wdt->wdt_device); |
| if (ret) { |
| dev_err(dev, "cannot register watchdog (%d)\n", ret); |
| goto err_cpufreq; |
| } |
| |
| ret = s3c2410wdt_mask_and_disable_reset(wdt, false); |
| if (ret < 0) |
| goto err_unregister; |
| |
| if (tmr_atboot && started == 0) { |
| dev_info(dev, "starting watchdog timer\n"); |
| s3c2410wdt_start(&wdt->wdt_device); |
| } else if (!tmr_atboot) { |
| /* if we're not enabling the watchdog, then ensure it is |
| * disabled if it has been left running from the bootloader |
| * or other source */ |
| |
| s3c2410wdt_stop(&wdt->wdt_device); |
| } |
| |
| platform_set_drvdata(pdev, wdt); |
| |
| wdt->restart_handler.notifier_call = s3c2410wdt_restart; |
| wdt->restart_handler.priority = 128; |
| ret = register_restart_handler(&wdt->restart_handler); |
| if (ret) |
| pr_err("cannot register restart handler, %d\n", ret); |
| |
| /* print out a statement of readiness */ |
| |
| wtcon = readl(wdt->reg_base + S3C2410_WTCON); |
| |
| dev_info(dev, "watchdog %sactive, reset %sabled, irq %sabled\n", |
| (wtcon & S3C2410_WTCON_ENABLE) ? "" : "in", |
| (wtcon & S3C2410_WTCON_RSTEN) ? "en" : "dis", |
| (wtcon & S3C2410_WTCON_INTEN) ? "en" : "dis"); |
| |
| return 0; |
| |
| err_unregister: |
| watchdog_unregister_device(&wdt->wdt_device); |
| |
| err_cpufreq: |
| s3c2410wdt_cpufreq_deregister(wdt); |
| |
| err_clk: |
| clk_disable_unprepare(wdt->clock); |
| |
| err: |
| return ret; |
| } |
| |
| static int s3c2410wdt_remove(struct platform_device *dev) |
| { |
| int ret; |
| struct s3c2410_wdt *wdt = platform_get_drvdata(dev); |
| |
| unregister_restart_handler(&wdt->restart_handler); |
| |
| ret = s3c2410wdt_mask_and_disable_reset(wdt, true); |
| if (ret < 0) |
| return ret; |
| |
| watchdog_unregister_device(&wdt->wdt_device); |
| |
| s3c2410wdt_cpufreq_deregister(wdt); |
| |
| clk_disable_unprepare(wdt->clock); |
| |
| return 0; |
| } |
| |
| static void s3c2410wdt_shutdown(struct platform_device *dev) |
| { |
| struct s3c2410_wdt *wdt = platform_get_drvdata(dev); |
| |
| s3c2410wdt_mask_and_disable_reset(wdt, true); |
| |
| s3c2410wdt_stop(&wdt->wdt_device); |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| |
| static int s3c2410wdt_suspend(struct device *dev) |
| { |
| int ret; |
| struct s3c2410_wdt *wdt = dev_get_drvdata(dev); |
| |
| /* Save watchdog state, and turn it off. */ |
| wdt->wtcon_save = readl(wdt->reg_base + S3C2410_WTCON); |
| wdt->wtdat_save = readl(wdt->reg_base + S3C2410_WTDAT); |
| |
| ret = s3c2410wdt_mask_and_disable_reset(wdt, true); |
| if (ret < 0) |
| return ret; |
| |
| /* Note that WTCNT doesn't need to be saved. */ |
| s3c2410wdt_stop(&wdt->wdt_device); |
| |
| return 0; |
| } |
| |
| static int s3c2410wdt_resume(struct device *dev) |
| { |
| int ret; |
| struct s3c2410_wdt *wdt = dev_get_drvdata(dev); |
| |
| /* Restore watchdog state. */ |
| writel(wdt->wtdat_save, wdt->reg_base + S3C2410_WTDAT); |
| writel(wdt->wtdat_save, wdt->reg_base + S3C2410_WTCNT);/* Reset count */ |
| writel(wdt->wtcon_save, wdt->reg_base + S3C2410_WTCON); |
| |
| ret = s3c2410wdt_mask_and_disable_reset(wdt, false); |
| if (ret < 0) |
| return ret; |
| |
| dev_info(dev, "watchdog %sabled\n", |
| (wdt->wtcon_save & S3C2410_WTCON_ENABLE) ? "en" : "dis"); |
| |
| return 0; |
| } |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(s3c2410wdt_pm_ops, s3c2410wdt_suspend, |
| s3c2410wdt_resume); |
| |
| static struct platform_driver s3c2410wdt_driver = { |
| .probe = s3c2410wdt_probe, |
| .remove = s3c2410wdt_remove, |
| .shutdown = s3c2410wdt_shutdown, |
| .id_table = s3c2410_wdt_ids, |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = "s3c2410-wdt", |
| .pm = &s3c2410wdt_pm_ops, |
| .of_match_table = of_match_ptr(s3c2410_wdt_match), |
| }, |
| }; |
| |
| module_platform_driver(s3c2410wdt_driver); |
| |
| MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>, " |
| "Dimitry Andric <dimitry.andric@tomtom.com>"); |
| MODULE_DESCRIPTION("S3C2410 Watchdog Device Driver"); |
| MODULE_LICENSE("GPL"); |