diff --git a/drivers/media/video/mt20xx.c b/drivers/media/video/mt20xx.c
index 1fa89db..fbcb282 100644
--- a/drivers/media/video/mt20xx.c
+++ b/drivers/media/video/mt20xx.c
@@ -14,8 +14,6 @@
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "enable verbose debug messages");
 
-#define PREFIX "mt20xx"
-
 /* ---------------------------------------------------------------------- */
 
 static unsigned int optimize_vco  = 1;
@@ -611,6 +609,7 @@
 
 	priv->i2c_props.addr = i2c_addr;
 	priv->i2c_props.adap = i2c_adap;
+	priv->i2c_props.name = "mt20xx";
 
 	//priv->radio_if2 = 10700 * 1000;	/* 10.7MHz - FM radio */
 
diff --git a/drivers/media/video/tda8290.c b/drivers/media/video/tda8290.c
index 55bc89a..6f2449a 100644
--- a/drivers/media/video/tda8290.c
+++ b/drivers/media/video/tda8290.c
@@ -32,8 +32,6 @@
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "enable verbose debug messages");
 
-#define PREFIX "tda8290"
-
 /* ---------------------------------------------------------------------- */
 
 struct tda8290_priv {
@@ -674,6 +672,7 @@
 
 	priv->i2c_props.addr     = i2c_addr;
 	priv->i2c_props.adap     = i2c_adap;
+	priv->i2c_props.name     = "tda829x";
 	if (cfg) {
 		priv->cfg.config         = cfg->lna_cfg;
 		priv->cfg.tuner_callback = cfg->tuner_callback;
diff --git a/drivers/media/video/tda9887.c b/drivers/media/video/tda9887.c
index 106c93b..75d0840 100644
--- a/drivers/media/video/tda9887.c
+++ b/drivers/media/video/tda9887.c
@@ -25,8 +25,6 @@
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "enable verbose debug messages");
 
-#define PREFIX "tda9887"
-
 struct tda9887_priv {
 	struct tuner_i2c_props i2c_props;
 
@@ -673,6 +671,7 @@
 
 	priv->i2c_props.addr = i2c_addr;
 	priv->i2c_props.adap = i2c_adap;
+	priv->i2c_props.name = "tda9887";
 	priv->mode = T_STANDBY;
 
 	tuner_info("tda988[5/6/7] found\n");
diff --git a/drivers/media/video/tea5761.c b/drivers/media/video/tea5761.c
index 3561266..bd5ad54 100644
--- a/drivers/media/video/tea5761.c
+++ b/drivers/media/video/tea5761.c
@@ -18,8 +18,6 @@
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "enable verbose debug messages");
 
-#define PREFIX "tea5761"
-
 struct tea5761_priv {
 	struct tuner_i2c_props i2c_props;
 
@@ -131,7 +129,7 @@
 
 	frq = 1000 * (div * 32768 / 1000 + FREQ_OFFSET + 225) / 4;	/* Freq in KHz */
 
-	printk(PREFIX "Frequency %d.%03d KHz (divider = 0x%04x)\n",
+	printk(KERN_INFO "tea5761: Frequency %d.%03d KHz (divider = 0x%04x)\n",
 	       frq / 1000, frq % 1000, div);
 }
 
@@ -302,6 +300,7 @@
 
 	priv->i2c_props.addr = i2c_addr;
 	priv->i2c_props.adap = i2c_adap;
+	priv->i2c_props.name = "tea5761";
 
 	memcpy(&fe->ops.tuner_ops, &tea5761_tuner_ops,
 	       sizeof(struct dvb_tuner_ops));
diff --git a/drivers/media/video/tea5767.c b/drivers/media/video/tea5767.c
index ba66c6d..833f276 100644
--- a/drivers/media/video/tea5767.c
+++ b/drivers/media/video/tea5767.c
@@ -20,8 +20,6 @@
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "enable verbose debug messages");
 
-#define PREFIX "tea5767"
-
 /*****************************************************************************/
 
 struct tea5767_priv {
@@ -137,14 +135,14 @@
 	unsigned int div, frq;
 
 	if (TEA5767_READY_FLAG_MASK & buffer[0])
-		printk(PREFIX "Ready Flag ON\n");
+		tuner_info("Ready Flag ON\n");
 	else
-		printk(PREFIX "Ready Flag OFF\n");
+		tuner_info("Ready Flag OFF\n");
 
 	if (TEA5767_BAND_LIMIT_MASK & buffer[0])
-		printk(PREFIX "Tuner at band limit\n");
+		tuner_info("Tuner at band limit\n");
 	else
-		printk(PREFIX "Tuner not at band limit\n");
+		tuner_info("Tuner not at band limit\n");
 
 	div = ((buffer[0] & 0x3f) << 8) | buffer[1];
 
@@ -166,23 +164,23 @@
 	buffer[0] = (div >> 8) & 0x3f;
 	buffer[1] = div & 0xff;
 
-	printk(PREFIX "Frequency %d.%03d KHz (divider = 0x%04x)\n",
-	       frq / 1000, frq % 1000, div);
+	tuner_info("Frequency %d.%03d KHz (divider = 0x%04x)\n",
+		   frq / 1000, frq % 1000, div);
 
 	if (TEA5767_STEREO_MASK & buffer[2])
-		printk(PREFIX "Stereo\n");
+		tuner_info("Stereo\n");
 	else
-		printk(PREFIX "Mono\n");
+		tuner_info("Mono\n");
 
-	printk(PREFIX "IF Counter = %d\n", buffer[2] & TEA5767_IF_CNTR_MASK);
+	tuner_info("IF Counter = %d\n", buffer[2] & TEA5767_IF_CNTR_MASK);
 
-	printk(PREFIX "ADC Level = %d\n",
-	       (buffer[3] & TEA5767_ADC_LEVEL_MASK) >> 4);
+	tuner_info("ADC Level = %d\n",
+		   (buffer[3] & TEA5767_ADC_LEVEL_MASK) >> 4);
 
-	printk(PREFIX "Chip ID = %d\n", (buffer[3] & TEA5767_CHIP_ID_MASK));
+	tuner_info("Chip ID = %d\n", (buffer[3] & TEA5767_CHIP_ID_MASK));
 
-	printk(PREFIX "Reserved = 0x%02x\n",
-	       (buffer[4] & TEA5767_RESERVED_MASK));
+	tuner_info("Reserved = 0x%02x\n",
+		   (buffer[4] & TEA5767_RESERVED_MASK));
 }
 
 /* Freq should be specifyed at 62.5 Hz */
@@ -456,6 +454,8 @@
 
 	priv->i2c_props.addr  = i2c_addr;
 	priv->i2c_props.adap  = i2c_adap;
+	priv->i2c_props.name  = "tea5767";
+
 	priv->ctrl.xtal_freq  = TEA5767_HIGH_LO_32768;
 	priv->ctrl.port1      = 1;
 	priv->ctrl.port2      = 1;
diff --git a/drivers/media/video/tuner-simple.c b/drivers/media/video/tuner-simple.c
index 10addf2..dc24671 100644
--- a/drivers/media/video/tuner-simple.c
+++ b/drivers/media/video/tuner-simple.c
@@ -17,8 +17,6 @@
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "enable verbose debug messages");
 
-#define PREFIX "tuner-simple"
-
 static int offset;
 module_param(offset, int, 0664);
 MODULE_PARM_DESC(offset, "Allows to specify an offset for tuner");
@@ -738,6 +736,8 @@
 
 	priv->i2c_props.addr = i2c_addr;
 	priv->i2c_props.adap = i2c_adap;
+	priv->i2c_props.name = "tuner-simple";
+
 	priv->type = type;
 	priv->tun  = &tuners[type];
 
diff --git a/drivers/media/video/tuner-xc2028.c b/drivers/media/video/tuner-xc2028.c
index 8f4fdf7..42dc2c6 100644
--- a/drivers/media/video/tuner-xc2028.c
+++ b/drivers/media/video/tuner-xc2028.c
@@ -23,8 +23,6 @@
 #include "dvb_frontend.h"
 
 
-#define PREFIX "xc2028"
-
 static int debug;
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "enable verbose debug messages");
@@ -1153,13 +1151,13 @@
 	void               *video_dev;
 
 	if (debug)
-		printk(KERN_DEBUG PREFIX ": Xcv2028/3028 init called!\n");
+		printk(KERN_DEBUG "xc2028: Xcv2028/3028 init called!\n");
 
 	if (NULL == cfg || NULL == cfg->video_dev)
 		return NULL;
 
 	if (!fe) {
-		printk(KERN_ERR PREFIX ": No frontend!\n");
+		printk(KERN_ERR "xc2028: No frontend!\n");
 		return NULL;
 	}
 
@@ -1183,6 +1181,8 @@
 
 		priv->i2c_props.addr = cfg->i2c_addr;
 		priv->i2c_props.adap = cfg->i2c_adap;
+		priv->i2c_props.name = "xc2028";
+
 		priv->video_dev = video_dev;
 		priv->tuner_callback = cfg->callback;
 		priv->ctrl.max_len = 13;