dmfe: convert to new API
Convert to internal net_device-stats and net_device_ops
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c
index 28a5c51..2e5c999 100644
--- a/drivers/net/tulip/dmfe.c
+++ b/drivers/net/tulip/dmfe.c
@@ -257,9 +257,6 @@
u8 wol_mode; /* user WOL settings */
struct timer_list timer;
- /* System defined statistic counter */
- struct net_device_stats stats;
-
/* Driver defined statistic counter */
unsigned long tx_fifo_underrun;
unsigned long tx_loss_carrier;
@@ -316,7 +313,6 @@
static int dmfe_open(struct DEVICE *);
static int dmfe_start_xmit(struct sk_buff *, struct DEVICE *);
static int dmfe_stop(struct DEVICE *);
-static struct net_device_stats * dmfe_get_stats(struct DEVICE *);
static void dmfe_set_filter_mode(struct DEVICE *);
static const struct ethtool_ops netdev_ethtool_ops;
static u16 read_srom_word(long ,int);
@@ -351,6 +347,19 @@
/* DM910X network board routine ---------------------------- */
+static const struct net_device_ops netdev_ops = {
+ .ndo_open = dmfe_open,
+ .ndo_stop = dmfe_stop,
+ .ndo_start_xmit = dmfe_start_xmit,
+ .ndo_set_multicast_list = dmfe_set_filter_mode,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = poll_dmfe,
+#endif
+};
+
/*
* Search DM910X board ,allocate space and register it
*/
@@ -442,14 +451,7 @@
dev->base_addr = db->ioaddr;
dev->irq = pdev->irq;
pci_set_drvdata(pdev, dev);
- dev->open = &dmfe_open;
- dev->hard_start_xmit = &dmfe_start_xmit;
- dev->stop = &dmfe_stop;
- dev->get_stats = &dmfe_get_stats;
- dev->set_multicast_list = &dmfe_set_filter_mode;
-#ifdef CONFIG_NET_POLL_CONTROLLER
- dev->poll_controller = &poll_dmfe;
-#endif
+ dev->netdev_ops = &netdev_ops;
dev->ethtool_ops = &netdev_ethtool_ops;
netif_carrier_off(dev);
spin_lock_init(&db->lock);
@@ -867,15 +869,15 @@
/* A packet sent completed */
db->tx_packet_cnt--;
- db->stats.tx_packets++;
+ dev->stats.tx_packets++;
/* Transmit statistic counter */
if ( tdes0 != 0x7fffffff ) {
/* printk(DRV_NAME ": tdes0=%x\n", tdes0); */
- db->stats.collisions += (tdes0 >> 3) & 0xf;
- db->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff;
+ dev->stats.collisions += (tdes0 >> 3) & 0xf;
+ dev->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff;
if (tdes0 & TDES0_ERR_MASK) {
- db->stats.tx_errors++;
+ dev->stats.tx_errors++;
if (tdes0 & 0x0002) { /* UnderRun */
db->tx_fifo_underrun++;
@@ -969,13 +971,13 @@
if (rdes0 & 0x8000) {
/* This is a error packet */
//printk(DRV_NAME ": rdes0: %lx\n", rdes0);
- db->stats.rx_errors++;
+ dev->stats.rx_errors++;
if (rdes0 & 1)
- db->stats.rx_fifo_errors++;
+ dev->stats.rx_fifo_errors++;
if (rdes0 & 2)
- db->stats.rx_crc_errors++;
+ dev->stats.rx_crc_errors++;
if (rdes0 & 0x80)
- db->stats.rx_length_errors++;
+ dev->stats.rx_length_errors++;
}
if ( !(rdes0 & 0x8000) ||
@@ -1008,8 +1010,8 @@
skb->protocol = eth_type_trans(skb, dev);
netif_rx(skb);
- db->stats.rx_packets++;
- db->stats.rx_bytes += rxlen;
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += rxlen;
}
} else {
/* Reuse SKB buffer when the packet is error */
@@ -1024,20 +1026,6 @@
db->rx_ready_ptr = rxptr;
}
-
-/*
- * Get statistics from driver.
- */
-
-static struct net_device_stats * dmfe_get_stats(struct DEVICE *dev)
-{
- struct dmfe_board_info *db = netdev_priv(dev);
-
- DMFE_DBUG(0, "dmfe_get_stats", 0);
- return &db->stats;
-}
-
-
/*
* Set DM910X multicast address
*/
@@ -1161,7 +1149,7 @@
/* Operating Mode Check */
if ( (db->dm910x_chk_mode & 0x1) &&
- (db->stats.rx_packets > MAX_CHECK_PACKET) )
+ (dev->stats.rx_packets > MAX_CHECK_PACKET) )
db->dm910x_chk_mode = 0x4;
/* Dynamic reset DM910X : system error or transmit time-out */