MIPS: ath79: add support for the Qualcomm Atheros AP136-010 board
Also enable the board in the default configuration.
Cc: Rodriguez, Luis <rodrigue@qca.qualcomm.com>
Cc: Giori, Kathy <kgiori@qca.qualcomm.com>
Cc: QCA Linux Team <qca-linux-team@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/4953/
Signed-off-by: John Crispin <blogic@openwrt.org>
diff --git a/arch/mips/ath79/mach-ap136.c b/arch/mips/ath79/mach-ap136.c
new file mode 100644
index 0000000..479dd4b
--- /dev/null
+++ b/arch/mips/ath79/mach-ap136.c
@@ -0,0 +1,156 @@
+/*
+ * Qualcomm Atheros AP136 reference board support
+ *
+ * Copyright (c) 2012 Qualcomm Atheros
+ * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/ath9k_platform.h>
+
+#include "machtypes.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "pci.h"
+
+#define AP136_GPIO_LED_STATUS_RED 14
+#define AP136_GPIO_LED_STATUS_GREEN 19
+#define AP136_GPIO_LED_USB 4
+#define AP136_GPIO_LED_WLAN_2G 13
+#define AP136_GPIO_LED_WLAN_5G 12
+#define AP136_GPIO_LED_WPS_RED 15
+#define AP136_GPIO_LED_WPS_GREEN 20
+
+#define AP136_GPIO_BTN_WPS 16
+#define AP136_GPIO_BTN_RFKILL 21
+
+#define AP136_KEYS_POLL_INTERVAL 20 /* msecs */
+#define AP136_KEYS_DEBOUNCE_INTERVAL (3 * AP136_KEYS_POLL_INTERVAL)
+
+#define AP136_WMAC_CALDATA_OFFSET 0x1000
+#define AP136_PCIE_CALDATA_OFFSET 0x5000
+
+static struct gpio_led ap136_leds_gpio[] __initdata = {
+ {
+ .name = "qca:green:status",
+ .gpio = AP136_GPIO_LED_STATUS_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "qca:red:status",
+ .gpio = AP136_GPIO_LED_STATUS_RED,
+ .active_low = 1,
+ },
+ {
+ .name = "qca:green:wps",
+ .gpio = AP136_GPIO_LED_WPS_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "qca:red:wps",
+ .gpio = AP136_GPIO_LED_WPS_RED,
+ .active_low = 1,
+ },
+ {
+ .name = "qca:red:wlan-2g",
+ .gpio = AP136_GPIO_LED_WLAN_2G,
+ .active_low = 1,
+ },
+ {
+ .name = "qca:red:usb",
+ .gpio = AP136_GPIO_LED_USB,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button ap136_gpio_keys[] __initdata = {
+ {
+ .desc = "WPS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = AP136_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = AP136_GPIO_BTN_WPS,
+ .active_low = 1,
+ },
+ {
+ .desc = "RFKILL button",
+ .type = EV_KEY,
+ .code = KEY_RFKILL,
+ .debounce_interval = AP136_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = AP136_GPIO_BTN_RFKILL,
+ .active_low = 1,
+ },
+};
+
+static struct spi_board_info ap136_spi_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 25000000,
+ .modalias = "mx25l6405d",
+ }
+};
+
+static struct ath79_spi_platform_data ap136_spi_data = {
+ .bus_num = 0,
+ .num_chipselect = 1,
+};
+
+#ifdef CONFIG_PCI
+static struct ath9k_platform_data ap136_ath9k_data;
+
+static int ap136_pci_plat_dev_init(struct pci_dev *dev)
+{
+ if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0)
+ dev->dev.platform_data = &ap136_ath9k_data;
+
+ return 0;
+}
+
+static void __init ap136_pci_init(u8 *eeprom)
+{
+ memcpy(ap136_ath9k_data.eeprom_data, eeprom,
+ sizeof(ap136_ath9k_data.eeprom_data));
+
+ ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init);
+ ath79_register_pci();
+}
+#else
+static inline void ap136_pci_init(void) {}
+#endif /* CONFIG_PCI */
+
+static void __init ap136_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
+ ap136_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ap136_gpio_keys),
+ ap136_gpio_keys);
+ ath79_register_spi(&ap136_spi_data, ap136_spi_info,
+ ARRAY_SIZE(ap136_spi_info));
+ ath79_register_usb();
+ ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET);
+ ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET);
+}
+
+MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010",
+ "Atheros AP136-010 reference board",
+ ap136_setup);