ARM: Add support for FA526 v2
Adds support for Faraday FA526 core. This core is used at least by:
Cortina Systems Gemini and Centroid family
Cavium Networks ECONA family
Grain Media GM8120
Pixelplus ImageARM
Prolific PL-1029
Faraday IP evaluation boards
v2:
- move TLB_BTB to separate patch
- update copyrights
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S
new file mode 100644
index 0000000..08b8a95
--- /dev/null
+++ b/arch/arm/mm/proc-fa526.S
@@ -0,0 +1,248 @@
+/*
+ * linux/arch/arm/mm/proc-fa526.S: MMU functions for FA526
+ *
+ * Written by : Luke Lee
+ * Copyright (C) 2005 Faraday Corp.
+ * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *
+ * These are the low level assembler for performing cache and TLB
+ * functions on the fa526.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/hwcap.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include <asm/system.h>
+
+#include "proc-macros.S"
+
+#define CACHE_DLINESIZE 16
+
+ .text
+/*
+ * cpu_fa526_proc_init()
+ */
+ENTRY(cpu_fa526_proc_init)
+ mov pc, lr
+
+/*
+ * cpu_fa526_proc_fin()
+ */
+ENTRY(cpu_fa526_proc_fin)
+ stmfd sp!, {lr}
+ mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+ msr cpsr_c, ip
+ bl fa_flush_kern_cache_all
+ mrc p15, 0, r0, c1, c0, 0 @ ctrl register
+ bic r0, r0, #0x1000 @ ...i............
+ bic r0, r0, #0x000e @ ............wca.
+ mcr p15, 0, r0, c1, c0, 0 @ disable caches
+ nop
+ nop
+ ldmfd sp!, {pc}
+
+/*
+ * cpu_fa526_reset(loc)
+ *
+ * Perform a soft reset of the system. Put the CPU into the
+ * same state as it would be if it had been reset, and branch
+ * to what would be the reset vector.
+ *
+ * loc: location to jump to for soft reset
+ */
+ .align 4
+ENTRY(cpu_fa526_reset)
+/* TODO: Use CP8 if possible... */
+ mov ip, #0
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+#ifdef CONFIG_MMU
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+#endif
+ mrc p15, 0, ip, c1, c0, 0 @ ctrl register
+ bic ip, ip, #0x000f @ ............wcam
+ bic ip, ip, #0x1100 @ ...i...s........
+ bic ip, ip, #0x0800 @ BTB off
+ mcr p15, 0, ip, c1, c0, 0 @ ctrl register
+ nop
+ nop
+ mov pc, r0
+
+/*
+ * cpu_fa526_do_idle()
+ */
+ .align 4
+ENTRY(cpu_fa526_do_idle)
+ mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
+ mov pc, lr
+
+
+ENTRY(cpu_fa526_dcache_clean_area)
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHE_DLINESIZE
+ subs r1, r1, #CACHE_DLINESIZE
+ bhi 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/* =============================== PageTable ============================== */
+
+/*
+ * cpu_fa526_switch_mm(pgd)
+ *
+ * Set the translation base pointer to be as described by pgd.
+ *
+ * pgd: new page tables
+ */
+ .align 4
+ENTRY(cpu_fa526_switch_mm)
+#ifdef CONFIG_MMU
+ mov ip, #0
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
+#else
+ mcr p15, 0, ip, c7, c14, 0 @ clean and invalidate whole D cache
+#endif
+ mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
+ mcr p15, 0, ip, c7, c5, 6 @ invalidate BTB since mm changed
+ mcr p15, 0, ip, c7, c10, 4 @ data write barrier
+ mcr p15, 0, ip, c7, c5, 4 @ prefetch flush
+ mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate UTLB
+#endif
+ mov pc, lr
+
+/*
+ * cpu_fa526_set_pte_ext(ptep, pte, ext)
+ *
+ * Set a PTE and flush it out
+ */
+ .align 4
+ENTRY(cpu_fa526_set_pte_ext)
+#ifdef CONFIG_MMU
+ armv3_set_pte_ext
+ mov r0, r0
+ mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mov r0, #0
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+#endif
+ mov pc, lr
+
+ __INIT
+
+ .type __fa526_setup, #function
+__fa526_setup:
+ /* On return of this routine, r0 must carry correct flags for CFG register */
+ mov r0, #0
+ mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
+#ifdef CONFIG_MMU
+ mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
+#endif
+ mcr p15, 0, r0, c7, c5, 5 @ invalidate IScratchpad RAM
+
+ mov r0, #1
+ mcr p15, 0, r0, c1, c1, 0 @ turn-on ECR
+
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB All
+ mcr p15, 0, r0, c7, c10, 4 @ data write barrier
+ mcr p15, 0, r0, c7, c5, 4 @ prefetch flush
+
+ mov r0, #0x1f @ Domains 0, 1 = manager, 2 = client
+ mcr p15, 0, r0, c3, c0 @ load domain access register
+
+ mrc p15, 0, r0, c1, c0 @ get control register v4
+ ldr r5, fa526_cr1_clear
+ bic r0, r0, r5
+ ldr r5, fa526_cr1_set
+ orr r0, r0, r5
+ mov pc, lr
+ .size __fa526_setup, . - __fa526_setup
+
+ /*
+ * .RVI ZFRS BLDP WCAM
+ * ..11 1001 .111 1101
+ *
+ */
+ .type fa526_cr1_clear, #object
+ .type fa526_cr1_set, #object
+fa526_cr1_clear:
+ .word 0x3f3f
+fa526_cr1_set:
+ .word 0x397D
+
+ __INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ * come through these
+ */
+ .type fa526_processor_functions, #object
+fa526_processor_functions:
+ .word v4_early_abort
+ .word pabort_noifar
+ .word cpu_fa526_proc_init
+ .word cpu_fa526_proc_fin
+ .word cpu_fa526_reset
+ .word cpu_fa526_do_idle
+ .word cpu_fa526_dcache_clean_area
+ .word cpu_fa526_switch_mm
+ .word cpu_fa526_set_pte_ext
+ .size fa526_processor_functions, . - fa526_processor_functions
+
+ .section ".rodata"
+
+ .type cpu_arch_name, #object
+cpu_arch_name:
+ .asciz "armv4"
+ .size cpu_arch_name, . - cpu_arch_name
+
+ .type cpu_elf_name, #object
+cpu_elf_name:
+ .asciz "v4"
+ .size cpu_elf_name, . - cpu_elf_name
+
+ .type cpu_fa526_name, #object
+cpu_fa526_name:
+ .asciz "FA526"
+ .size cpu_fa526_name, . - cpu_fa526_name
+
+ .align
+
+ .section ".proc.info.init", #alloc, #execinstr
+
+ .type __fa526_proc_info,#object
+__fa526_proc_info:
+ .long 0x66015261
+ .long 0xff01fff1
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __fa526_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP | HWCAP_HALF
+ .long cpu_fa526_name
+ .long fa526_processor_functions
+ .long fa_tlb_fns
+ .long fa_user_fns
+ .long fa_cache_fns
+ .size __fa526_proc_info, . - __fa526_proc_info