diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h
index bc96288..467c4bc 100644
--- a/drivers/net/wireless/iwlwifi/iwl-prph.h
+++ b/drivers/net/wireless/iwlwifi/iwl-prph.h
@@ -295,25 +295,6 @@
 #define OSC_CLK				(0xa04068)
 #define OSC_CLK_FORCE_CONTROL		(0x8)
 
-/* SECURE boot registers */
-#define LMPM_SECURE_BOOT_CONFIG_ADDR	(0x100)
-enum secure_boot_config_reg {
-	LMPM_SECURE_BOOT_CONFIG_INSPECTOR_BURNED_IN_OTP	= 0x00000001,
-	LMPM_SECURE_BOOT_CONFIG_INSPECTOR_NOT_REQ	= 0x00000002,
-};
-
-#define LMPM_SECURE_BOOT_CPU1_STATUS_ADDR_B0	(0xA01E30)
-#define LMPM_SECURE_BOOT_CPU1_STATUS_ADDR	(0x1E30)
-#define LMPM_SECURE_BOOT_CPU2_STATUS_ADDR	(0x1E34)
-enum secure_boot_status_reg {
-	LMPM_SECURE_BOOT_CPU_STATUS_VERF_STATUS		= 0x00000001,
-	LMPM_SECURE_BOOT_CPU_STATUS_VERF_COMPLETED	= 0x00000002,
-	LMPM_SECURE_BOOT_CPU_STATUS_VERF_SUCCESS	= 0x00000004,
-	LMPM_SECURE_BOOT_CPU_STATUS_VERF_FAIL		= 0x00000008,
-	LMPM_SECURE_BOOT_CPU_STATUS_SIGN_VERF_FAIL	= 0x00000010,
-	LMPM_SECURE_BOOT_STATUS_SUCCESS			= 0x00000003,
-};
-
 #define FH_UCODE_LOAD_STATUS		(0x1AF0)
 #define CSR_UCODE_LOAD_STATUS_ADDR	(0x1E70)
 enum secure_load_status_reg {
@@ -334,8 +315,6 @@
 #define LMPM_SECURE_CPU1_HDR_MEM_SPACE		(0x420000)
 #define LMPM_SECURE_CPU2_HDR_MEM_SPACE		(0x420400)
 
-#define LMPM_SECURE_TIME_OUT	(100) /* 10 micro */
-
 /* Rx FIFO */
 #define RXF_SIZE_ADDR			(0xa00c88)
 #define RXF_RD_D_SPACE			(0xa00c40)
diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c
index dc24732..df0022e 100644
--- a/drivers/net/wireless/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/iwlwifi/pcie/trans.c
@@ -930,7 +930,6 @@
 {
 	int ret = 0;
 	int first_ucode_section;
-	u32 reg;
 
 	IWL_DEBUG_FW(trans, "working with %s CPU\n",
 		     image->is_dual_cpus ? "Dual" : "Single");
@@ -959,20 +958,6 @@
 	if (ret)
 		return ret;
 
-	/* wait for image verification to complete  */
-	ret = iwl_poll_prph_bit(trans, LMPM_SECURE_BOOT_CPU1_STATUS_ADDR_B0,
-				LMPM_SECURE_BOOT_STATUS_SUCCESS,
-				LMPM_SECURE_BOOT_STATUS_SUCCESS,
-				LMPM_SECURE_TIME_OUT);
-	if (ret < 0) {
-		reg = iwl_read_prph(trans,
-				    LMPM_SECURE_BOOT_CPU1_STATUS_ADDR_B0);
-
-		IWL_ERR(trans, "Timeout on secure boot process, reg = %x\n",
-			reg);
-		return ret;
-	}
-
 	return 0;
 }