net: qualcomm: new Ethernet over SPI driver for QCA7000
This patch adds the Ethernet over SPI driver for the
Qualcomm QCA7000 HomePlug GreenPHY.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/qualcomm/qca_debug.c b/drivers/net/ethernet/qualcomm/qca_debug.c
new file mode 100644
index 0000000..8e28234
--- /dev/null
+++ b/drivers/net/ethernet/qualcomm/qca_debug.c
@@ -0,0 +1,311 @@
+/*
+ * Copyright (c) 2011, 2012, Qualcomm Atheros Communications Inc.
+ * Copyright (c) 2014, I2SE GmbH
+ *
+ * Permission to use, copy, modify, and/or distribute this software
+ * for any purpose with or without fee is hereby granted, provided
+ * that the above copyright notice and this permission notice appear
+ * in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
+ * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL
+ * THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+ * NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/* This file contains debugging routines for use in the QCA7K driver.
+ */
+
+#include <linux/debugfs.h>
+#include <linux/ethtool.h>
+#include <linux/seq_file.h>
+#include <linux/types.h>
+
+#include "qca_7k.h"
+#include "qca_debug.h"
+
+#define QCASPI_MAX_REGS 0x20
+
+static const u16 qcaspi_spi_regs[] = {
+ SPI_REG_BFR_SIZE,
+ SPI_REG_WRBUF_SPC_AVA,
+ SPI_REG_RDBUF_BYTE_AVA,
+ SPI_REG_SPI_CONFIG,
+ SPI_REG_SPI_STATUS,
+ SPI_REG_INTR_CAUSE,
+ SPI_REG_INTR_ENABLE,
+ SPI_REG_RDBUF_WATERMARK,
+ SPI_REG_WRBUF_WATERMARK,
+ SPI_REG_SIGNATURE,
+ SPI_REG_ACTION_CTRL
+};
+
+/* The order of these strings must match the order of the fields in
+ * struct qcaspi_stats
+ * See qca_spi.h
+ */
+static const char qcaspi_gstrings_stats[][ETH_GSTRING_LEN] = {
+ "Triggered resets",
+ "Device resets",
+ "Reset timeouts",
+ "Read errors",
+ "Write errors",
+ "Read buffer errors",
+ "Write buffer errors",
+ "Out of memory",
+ "Write buffer misses",
+ "Transmit ring full",
+ "SPI errors",
+};
+
+#ifdef CONFIG_DEBUG_FS
+
+static int
+qcaspi_info_show(struct seq_file *s, void *what)
+{
+ struct qcaspi *qca = s->private;
+
+ seq_printf(s, "RX buffer size : %lu\n",
+ (unsigned long)qca->buffer_size);
+
+ seq_puts(s, "TX ring state : ");
+
+ if (qca->txr.skb[qca->txr.head] == NULL)
+ seq_puts(s, "empty");
+ else if (qca->txr.skb[qca->txr.tail])
+ seq_puts(s, "full");
+ else
+ seq_puts(s, "in use");
+
+ seq_puts(s, "\n");
+
+ seq_printf(s, "TX ring size : %u\n",
+ qca->txr.size);
+
+ seq_printf(s, "Sync state : %u (",
+ (unsigned int)qca->sync);
+ switch (qca->sync) {
+ case QCASPI_SYNC_UNKNOWN:
+ seq_puts(s, "QCASPI_SYNC_UNKNOWN");
+ break;
+ case QCASPI_SYNC_RESET:
+ seq_puts(s, "QCASPI_SYNC_RESET");
+ break;
+ case QCASPI_SYNC_READY:
+ seq_puts(s, "QCASPI_SYNC_READY");
+ break;
+ default:
+ seq_puts(s, "INVALID");
+ break;
+ }
+ seq_puts(s, ")\n");
+
+ seq_printf(s, "IRQ : %d\n",
+ qca->spi_dev->irq);
+ seq_printf(s, "INTR REQ : %u\n",
+ qca->intr_req);
+ seq_printf(s, "INTR SVC : %u\n",
+ qca->intr_svc);
+
+ seq_printf(s, "SPI max speed : %lu\n",
+ (unsigned long)qca->spi_dev->max_speed_hz);
+ seq_printf(s, "SPI mode : %x\n",
+ qca->spi_dev->mode);
+ seq_printf(s, "SPI chip select : %u\n",
+ (unsigned int)qca->spi_dev->chip_select);
+ seq_printf(s, "SPI legacy mode : %u\n",
+ (unsigned int)qca->legacy_mode);
+ seq_printf(s, "SPI burst length : %u\n",
+ (unsigned int)qca->burst_len);
+
+ return 0;
+}
+
+static int
+qcaspi_info_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, qcaspi_info_show, inode->i_private);
+}
+
+static const struct file_operations qcaspi_info_ops = {
+ .open = qcaspi_info_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+void
+qcaspi_init_device_debugfs(struct qcaspi *qca)
+{
+ struct dentry *device_root;
+
+ device_root = debugfs_create_dir(dev_name(&qca->net_dev->dev), NULL);
+ qca->device_root = device_root;
+
+ if (IS_ERR(device_root) || !device_root) {
+ pr_warn("failed to create debugfs directory for %s\n",
+ dev_name(&qca->net_dev->dev));
+ return;
+ }
+ debugfs_create_file("info", S_IFREG | S_IRUGO, device_root, qca,
+ &qcaspi_info_ops);
+}
+
+void
+qcaspi_remove_device_debugfs(struct qcaspi *qca)
+{
+ debugfs_remove_recursive(qca->device_root);
+}
+
+#else /* CONFIG_DEBUG_FS */
+
+void
+qcaspi_init_device_debugfs(struct qcaspi *qca)
+{
+}
+
+void
+qcaspi_remove_device_debugfs(struct qcaspi *qca)
+{
+}
+
+#endif
+
+static void
+qcaspi_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *p)
+{
+ struct qcaspi *qca = netdev_priv(dev);
+
+ strlcpy(p->driver, QCASPI_DRV_NAME, sizeof(p->driver));
+ strlcpy(p->version, QCASPI_DRV_VERSION, sizeof(p->version));
+ strlcpy(p->fw_version, "QCA7000", sizeof(p->fw_version));
+ strlcpy(p->bus_info, dev_name(&qca->spi_dev->dev),
+ sizeof(p->bus_info));
+}
+
+static int
+qcaspi_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ cmd->transceiver = XCVR_INTERNAL;
+ cmd->supported = SUPPORTED_10baseT_Half;
+ ethtool_cmd_speed_set(cmd, SPEED_10);
+ cmd->duplex = DUPLEX_HALF;
+ cmd->port = PORT_OTHER;
+ cmd->autoneg = AUTONEG_DISABLE;
+
+ return 0;
+}
+
+static void
+qcaspi_get_ethtool_stats(struct net_device *dev, struct ethtool_stats *estats, u64 *data)
+{
+ struct qcaspi *qca = netdev_priv(dev);
+ struct qcaspi_stats *st = &qca->stats;
+
+ memcpy(data, st, ARRAY_SIZE(qcaspi_gstrings_stats) * sizeof(u64));
+}
+
+static void
+qcaspi_get_strings(struct net_device *dev, u32 stringset, u8 *buf)
+{
+ switch (stringset) {
+ case ETH_SS_STATS:
+ memcpy(buf, &qcaspi_gstrings_stats,
+ sizeof(qcaspi_gstrings_stats));
+ break;
+ default:
+ WARN_ON(1);
+ break;
+ }
+}
+
+static int
+qcaspi_get_sset_count(struct net_device *dev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_STATS:
+ return ARRAY_SIZE(qcaspi_gstrings_stats);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int
+qcaspi_get_regs_len(struct net_device *dev)
+{
+ return sizeof(u32) * QCASPI_MAX_REGS;
+}
+
+static void
+qcaspi_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *p)
+{
+ struct qcaspi *qca = netdev_priv(dev);
+ u32 *regs_buff = p;
+ unsigned int i;
+
+ regs->version = 1;
+ memset(regs_buff, 0, sizeof(u32) * QCASPI_MAX_REGS);
+
+ for (i = 0; i < ARRAY_SIZE(qcaspi_spi_regs); i++) {
+ u16 offset, value;
+
+ qcaspi_read_register(qca, qcaspi_spi_regs[i], &value);
+ offset = qcaspi_spi_regs[i] >> 8;
+ regs_buff[offset] = value;
+ }
+}
+
+static void
+qcaspi_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ring)
+{
+ struct qcaspi *qca = netdev_priv(dev);
+
+ ring->rx_max_pending = 4;
+ ring->tx_max_pending = TX_RING_MAX_LEN;
+ ring->rx_pending = 4;
+ ring->tx_pending = qca->txr.count;
+}
+
+static int
+qcaspi_set_ringparam(struct net_device *dev, struct ethtool_ringparam *ring)
+{
+ struct qcaspi *qca = netdev_priv(dev);
+
+ if ((ring->rx_pending) ||
+ (ring->rx_mini_pending) ||
+ (ring->rx_jumbo_pending))
+ return -EINVAL;
+
+ if (netif_running(dev))
+ qcaspi_netdev_close(dev);
+
+ qca->txr.count = max_t(u32, ring->tx_pending, TX_RING_MIN_LEN);
+ qca->txr.count = min_t(u16, qca->txr.count, TX_RING_MAX_LEN);
+
+ if (netif_running(dev))
+ qcaspi_netdev_open(dev);
+
+ return 0;
+}
+
+static const struct ethtool_ops qcaspi_ethtool_ops = {
+ .get_drvinfo = qcaspi_get_drvinfo,
+ .get_link = ethtool_op_get_link,
+ .get_settings = qcaspi_get_settings,
+ .get_ethtool_stats = qcaspi_get_ethtool_stats,
+ .get_strings = qcaspi_get_strings,
+ .get_sset_count = qcaspi_get_sset_count,
+ .get_regs_len = qcaspi_get_regs_len,
+ .get_regs = qcaspi_get_regs,
+ .get_ringparam = qcaspi_get_ringparam,
+ .set_ringparam = qcaspi_set_ringparam,
+};
+
+void qcaspi_set_ethtool_ops(struct net_device *dev)
+{
+ dev->ethtool_ops = &qcaspi_ethtool_ops;
+}