forcedeth: Use pr_fmt and pr_<level>
Convert printks to pr_<level>.
Remove "forcedeth: " from some calls as it's now added by pr_fmt.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index b30a599..1c6f4ef9 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -39,6 +39,9 @@
* DEV_NEED_TIMERIRQ will not harm you on sane hardware, only generating a few
* superfluous timer interrupts from the nic.
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define FORCEDETH_VERSION "0.64"
#define DRV_NAME "forcedeth"
@@ -1189,7 +1192,8 @@
reg = mii_rw(dev, np->phyaddr, MII_NCONFIG, MII_READ);
reg &= ~PHY_MARVELL_E3016_INITMASK;
if (mii_rw(dev, np->phyaddr, MII_NCONFIG, reg)) {
- printk(KERN_INFO "%s: phy write to errata reg failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy write to errata reg failed\n",
+ pci_name(np->pci_dev));
return PHY_ERROR;
}
}
@@ -1197,31 +1201,38 @@
if (np->phy_model == PHY_MODEL_REALTEK_8211 &&
np->phy_rev == PHY_REV_REALTEK_8211B) {
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n",
+ pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, PHY_REALTEK_INIT2)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n",
+ pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT3)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n",
+ pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG3, PHY_REALTEK_INIT4)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n",
+ pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG4, PHY_REALTEK_INIT5)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n",
+ pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG5, PHY_REALTEK_INIT6)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n",
+ pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n",
+ pci_name(np->pci_dev));
return PHY_ERROR;
}
}
@@ -1241,23 +1252,27 @@
reg = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, MII_READ);
reg |= PHY_REALTEK_INIT9;
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, reg)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n",
+ pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT10)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n",
+ pci_name(np->pci_dev));
return PHY_ERROR;
}
reg = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG7, MII_READ);
if (!(reg & PHY_REALTEK_INIT11)) {
reg |= PHY_REALTEK_INIT11;
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG7, reg)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n",
+ pci_name(np->pci_dev));
return PHY_ERROR;
}
}
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n",
+ pci_name(np->pci_dev));
return PHY_ERROR;
}
}
@@ -1266,7 +1281,8 @@
phy_reserved = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, MII_READ);
phy_reserved |= PHY_REALTEK_INIT7;
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, phy_reserved)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n",
+ pci_name(np->pci_dev));
return PHY_ERROR;
}
}
@@ -1277,7 +1293,8 @@
reg = mii_rw(dev, np->phyaddr, MII_ADVERTISE, MII_READ);
reg |= (ADVERTISE_10HALF|ADVERTISE_10FULL|ADVERTISE_100HALF|ADVERTISE_100FULL|ADVERTISE_PAUSE_ASYM|ADVERTISE_PAUSE_CAP);
if (mii_rw(dev, np->phyaddr, MII_ADVERTISE, reg)) {
- printk(KERN_INFO "%s: phy write to advertise failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy write to advertise failed\n",
+ pci_name(np->pci_dev));
return PHY_ERROR;
}
@@ -1296,7 +1313,7 @@
mii_control_1000 &= ~ADVERTISE_1000FULL;
if (mii_rw(dev, np->phyaddr, MII_CTRL1000, mii_control_1000)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
} else
@@ -1311,7 +1328,7 @@
/* start autoneg since we already performed hw reset above */
mii_control |= BMCR_ANRESTART;
if (mii_rw(dev, np->phyaddr, MII_BMCR, mii_control)) {
- printk(KERN_INFO "%s: phy init failed\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
} else {
@@ -1319,7 +1336,7 @@
* (certain phys need bmcr to be setup with reset)
*/
if (phy_reset(dev, mii_control)) {
- printk(KERN_INFO "%s: phy reset failed\n", pci_name(np->pci_dev));
+ pr_info("%s: phy reset failed\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
}
@@ -1330,13 +1347,13 @@
phy_reserved &= ~(PHY_CICADA_INIT1 | PHY_CICADA_INIT2);
phy_reserved |= (PHY_CICADA_INIT3 | PHY_CICADA_INIT4);
if (mii_rw(dev, np->phyaddr, MII_RESV1, phy_reserved)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
phy_reserved = mii_rw(dev, np->phyaddr, MII_NCONFIG, MII_READ);
phy_reserved |= PHY_CICADA_INIT5;
if (mii_rw(dev, np->phyaddr, MII_NCONFIG, phy_reserved)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
}
@@ -1344,77 +1361,77 @@
phy_reserved = mii_rw(dev, np->phyaddr, MII_SREVISION, MII_READ);
phy_reserved |= PHY_CICADA_INIT6;
if (mii_rw(dev, np->phyaddr, MII_SREVISION, phy_reserved)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
}
if (np->phy_oui == PHY_OUI_VITESSE) {
if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG1, PHY_VITESSE_INIT1)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG2, PHY_VITESSE_INIT2)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
phy_reserved = mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG4, MII_READ);
if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG4, phy_reserved)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
phy_reserved = mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG3, MII_READ);
phy_reserved &= ~PHY_VITESSE_INIT_MSK1;
phy_reserved |= PHY_VITESSE_INIT3;
if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG3, phy_reserved)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG2, PHY_VITESSE_INIT4)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG2, PHY_VITESSE_INIT5)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
phy_reserved = mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG4, MII_READ);
phy_reserved &= ~PHY_VITESSE_INIT_MSK1;
phy_reserved |= PHY_VITESSE_INIT3;
if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG4, phy_reserved)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
phy_reserved = mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG3, MII_READ);
if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG3, phy_reserved)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG2, PHY_VITESSE_INIT6)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG2, PHY_VITESSE_INIT7)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
phy_reserved = mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG4, MII_READ);
if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG4, phy_reserved)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
phy_reserved = mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG3, MII_READ);
phy_reserved &= ~PHY_VITESSE_INIT_MSK2;
phy_reserved |= PHY_VITESSE_INIT8;
if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG3, phy_reserved)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG2, PHY_VITESSE_INIT9)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG1, PHY_VITESSE_INIT10)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
}
@@ -1423,31 +1440,38 @@
np->phy_rev == PHY_REV_REALTEK_8211B) {
/* reset could have cleared these out, set them back */
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n",
+ pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, PHY_REALTEK_INIT2)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n",
+ pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT3)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n",
+ pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG3, PHY_REALTEK_INIT4)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n",
+ pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG4, PHY_REALTEK_INIT5)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n",
+ pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG5, PHY_REALTEK_INIT6)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n",
+ pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n",
+ pci_name(np->pci_dev));
return PHY_ERROR;
}
}
@@ -1456,24 +1480,28 @@
phy_reserved = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, MII_READ);
phy_reserved |= PHY_REALTEK_INIT7;
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, phy_reserved)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n",
+ pci_name(np->pci_dev));
return PHY_ERROR;
}
}
if (phy_cross == NV_CROSSOVER_DETECTION_DISABLED) {
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT3)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n",
+ pci_name(np->pci_dev));
return PHY_ERROR;
}
phy_reserved = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, MII_READ);
phy_reserved &= ~PHY_REALTEK_INIT_MSK1;
phy_reserved |= PHY_REALTEK_INIT3;
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, phy_reserved)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n",
+ pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ pr_info("%s: phy init failed\n",
+ pci_name(np->pci_dev));
return PHY_ERROR;
}
}
@@ -1532,7 +1560,7 @@
writel(rx_ctrl, base + NvRegReceiverControl);
if (reg_delay(dev, NvRegReceiverStatus, NVREG_RCVSTAT_BUSY, 0,
NV_RXSTOP_DELAY1, NV_RXSTOP_DELAY1MAX))
- printk(KERN_INFO "nv_stop_rx: ReceiverStatus remained busy");
+ pr_info("%s: ReceiverStatus remained busy\n", __func__);
udelay(NV_RXSTOP_DELAY2);
if (!np->mac_in_use)
@@ -1567,7 +1595,7 @@
writel(tx_ctrl, base + NvRegTransmitterControl);
if (reg_delay(dev, NvRegTransmitterStatus, NVREG_XMITSTAT_BUSY, 0,
NV_TXSTOP_DELAY1, NV_TXSTOP_DELAY1MAX))
- printk(KERN_INFO "nv_stop_tx: TransmitterStatus remained busy");
+ pr_info("%s: TransmitterStatus remained busy\n", __func__);
udelay(NV_TXSTOP_DELAY2);
if (!np->mac_in_use)
@@ -2485,57 +2513,53 @@
u32 status;
union ring_type put_tx;
int saved_tx_limit;
+ int i;
if (np->msi_flags & NV_MSI_X_ENABLED)
status = readl(base + NvRegMSIXIrqStatus) & NVREG_IRQSTAT_MASK;
else
status = readl(base + NvRegIrqStatus) & NVREG_IRQSTAT_MASK;
- printk(KERN_INFO "%s: Got tx_timeout. irq: %08x\n", dev->name, status);
+ pr_info("%s: Got tx_timeout. irq: %08x\n", dev->name, status);
- {
- int i;
-
- printk(KERN_INFO "%s: Ring at %lx\n",
- dev->name, (unsigned long)np->ring_addr);
- printk(KERN_INFO "%s: Dumping tx registers\n", dev->name);
- for (i = 0; i <= np->register_size; i += 32) {
- printk(KERN_INFO "%3x: %08x %08x %08x %08x %08x %08x %08x %08x\n",
- i,
- readl(base + i + 0), readl(base + i + 4),
- readl(base + i + 8), readl(base + i + 12),
- readl(base + i + 16), readl(base + i + 20),
- readl(base + i + 24), readl(base + i + 28));
- }
- printk(KERN_INFO "%s: Dumping tx ring\n", dev->name);
- for (i = 0; i < np->tx_ring_size; i += 4) {
- if (!nv_optimized(np)) {
- printk(KERN_INFO "%03x: %08x %08x // %08x %08x // %08x %08x // %08x %08x\n",
- i,
- le32_to_cpu(np->tx_ring.orig[i].buf),
- le32_to_cpu(np->tx_ring.orig[i].flaglen),
- le32_to_cpu(np->tx_ring.orig[i+1].buf),
- le32_to_cpu(np->tx_ring.orig[i+1].flaglen),
- le32_to_cpu(np->tx_ring.orig[i+2].buf),
- le32_to_cpu(np->tx_ring.orig[i+2].flaglen),
- le32_to_cpu(np->tx_ring.orig[i+3].buf),
- le32_to_cpu(np->tx_ring.orig[i+3].flaglen));
- } else {
- printk(KERN_INFO "%03x: %08x %08x %08x // %08x %08x %08x // %08x %08x %08x // %08x %08x %08x\n",
- i,
- le32_to_cpu(np->tx_ring.ex[i].bufhigh),
- le32_to_cpu(np->tx_ring.ex[i].buflow),
- le32_to_cpu(np->tx_ring.ex[i].flaglen),
- le32_to_cpu(np->tx_ring.ex[i+1].bufhigh),
- le32_to_cpu(np->tx_ring.ex[i+1].buflow),
- le32_to_cpu(np->tx_ring.ex[i+1].flaglen),
- le32_to_cpu(np->tx_ring.ex[i+2].bufhigh),
- le32_to_cpu(np->tx_ring.ex[i+2].buflow),
- le32_to_cpu(np->tx_ring.ex[i+2].flaglen),
- le32_to_cpu(np->tx_ring.ex[i+3].bufhigh),
- le32_to_cpu(np->tx_ring.ex[i+3].buflow),
- le32_to_cpu(np->tx_ring.ex[i+3].flaglen));
- }
+ pr_info("%s: Ring at %lx\n", dev->name, (unsigned long)np->ring_addr);
+ pr_info("%s: Dumping tx registers\n", dev->name);
+ for (i = 0; i <= np->register_size; i += 32) {
+ pr_info("%3x: %08x %08x %08x %08x %08x %08x %08x %08x\n",
+ i,
+ readl(base + i + 0), readl(base + i + 4),
+ readl(base + i + 8), readl(base + i + 12),
+ readl(base + i + 16), readl(base + i + 20),
+ readl(base + i + 24), readl(base + i + 28));
+ }
+ pr_info("%s: Dumping tx ring\n", dev->name);
+ for (i = 0; i < np->tx_ring_size; i += 4) {
+ if (!nv_optimized(np)) {
+ pr_info("%03x: %08x %08x // %08x %08x // %08x %08x // %08x %08x\n",
+ i,
+ le32_to_cpu(np->tx_ring.orig[i].buf),
+ le32_to_cpu(np->tx_ring.orig[i].flaglen),
+ le32_to_cpu(np->tx_ring.orig[i+1].buf),
+ le32_to_cpu(np->tx_ring.orig[i+1].flaglen),
+ le32_to_cpu(np->tx_ring.orig[i+2].buf),
+ le32_to_cpu(np->tx_ring.orig[i+2].flaglen),
+ le32_to_cpu(np->tx_ring.orig[i+3].buf),
+ le32_to_cpu(np->tx_ring.orig[i+3].flaglen));
+ } else {
+ pr_info("%03x: %08x %08x %08x // %08x %08x %08x // %08x %08x %08x // %08x %08x %08x\n",
+ i,
+ le32_to_cpu(np->tx_ring.ex[i].bufhigh),
+ le32_to_cpu(np->tx_ring.ex[i].buflow),
+ le32_to_cpu(np->tx_ring.ex[i].flaglen),
+ le32_to_cpu(np->tx_ring.ex[i+1].bufhigh),
+ le32_to_cpu(np->tx_ring.ex[i+1].buflow),
+ le32_to_cpu(np->tx_ring.ex[i+1].flaglen),
+ le32_to_cpu(np->tx_ring.ex[i+2].bufhigh),
+ le32_to_cpu(np->tx_ring.ex[i+2].buflow),
+ le32_to_cpu(np->tx_ring.ex[i+2].flaglen),
+ le32_to_cpu(np->tx_ring.ex[i+3].bufhigh),
+ le32_to_cpu(np->tx_ring.ex[i+3].buflow),
+ le32_to_cpu(np->tx_ring.ex[i+3].flaglen));
}
}
@@ -3308,14 +3332,14 @@
if (nv_update_linkspeed(dev)) {
if (!netif_carrier_ok(dev)) {
netif_carrier_on(dev);
- printk(KERN_INFO "%s: link up.\n", dev->name);
+ pr_info("%s: link up\n", dev->name);
nv_txrx_gate(dev, false);
nv_start_rx(dev);
}
} else {
if (netif_carrier_ok(dev)) {
netif_carrier_off(dev);
- printk(KERN_INFO "%s: link down.\n", dev->name);
+ pr_info("%s: link down\n", dev->name);
nv_txrx_gate(dev, true);
nv_stop_rx(dev);
}
@@ -3764,7 +3788,8 @@
sprintf(np->name_rx, "%s-rx", dev->name);
if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector,
nv_nic_irq_rx, IRQF_SHARED, np->name_rx, dev) != 0) {
- printk(KERN_INFO "forcedeth: request_irq failed for rx %d\n", ret);
+ pr_info("request_irq failed for rx %d\n",
+ ret);
pci_disable_msix(np->pci_dev);
np->msi_flags &= ~NV_MSI_X_ENABLED;
goto out_err;
@@ -3773,7 +3798,8 @@
sprintf(np->name_tx, "%s-tx", dev->name);
if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector,
nv_nic_irq_tx, IRQF_SHARED, np->name_tx, dev) != 0) {
- printk(KERN_INFO "forcedeth: request_irq failed for tx %d\n", ret);
+ pr_info("request_irq failed for tx %d\n",
+ ret);
pci_disable_msix(np->pci_dev);
np->msi_flags &= ~NV_MSI_X_ENABLED;
goto out_free_rx;
@@ -3782,7 +3808,8 @@
sprintf(np->name_other, "%s-other", dev->name);
if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_OTHER].vector,
nv_nic_irq_other, IRQF_SHARED, np->name_other, dev) != 0) {
- printk(KERN_INFO "forcedeth: request_irq failed for link %d\n", ret);
+ pr_info("request_irq failed for link %d\n",
+ ret);
pci_disable_msix(np->pci_dev);
np->msi_flags &= ~NV_MSI_X_ENABLED;
goto out_free_tx;
@@ -3796,7 +3823,7 @@
} else {
/* Request irq for all interrupts */
if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector, handler, IRQF_SHARED, dev->name, dev) != 0) {
- printk(KERN_INFO "forcedeth: request_irq failed %d\n", ret);
+ pr_info("request_irq failed %d\n", ret);
pci_disable_msix(np->pci_dev);
np->msi_flags &= ~NV_MSI_X_ENABLED;
goto out_err;
@@ -3814,7 +3841,7 @@
np->msi_flags |= NV_MSI_ENABLED;
dev->irq = np->pci_dev->irq;
if (request_irq(np->pci_dev->irq, handler, IRQF_SHARED, dev->name, dev) != 0) {
- printk(KERN_INFO "forcedeth: request_irq failed %d\n", ret);
+ pr_info("request_irq failed %d\n", ret);
pci_disable_msi(np->pci_dev);
np->msi_flags &= ~NV_MSI_ENABLED;
dev->irq = np->pci_dev->irq;
@@ -3899,7 +3926,7 @@
if (np->recover_error) {
np->recover_error = 0;
- printk(KERN_INFO "%s: MAC in recoverable error state\n", dev->name);
+ pr_info("%s: MAC in recoverable error state\n", dev->name);
if (netif_running(dev)) {
netif_tx_lock_bh(dev);
netif_addr_lock(dev);
@@ -4195,14 +4222,14 @@
}
if (netif_running(dev))
- printk(KERN_INFO "%s: link down.\n", dev->name);
+ pr_info("%s: link down\n", dev->name);
bmcr = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ);
if (np->phy_model == PHY_MODEL_MARVELL_E3016) {
bmcr |= BMCR_ANENABLE;
/* reset the phy in order for settings to stick,
* and cause autoneg to start */
if (phy_reset(dev, bmcr)) {
- printk(KERN_INFO "%s: phy reset failed\n", dev->name);
+ pr_info("%s: phy reset failed\n", dev->name);
return -EINVAL;
}
} else {
@@ -4251,7 +4278,7 @@
if (np->phy_oui == PHY_OUI_MARVELL) {
/* reset the phy in order for forced mode settings to stick */
if (phy_reset(dev, bmcr)) {
- printk(KERN_INFO "%s: phy reset failed\n", dev->name);
+ pr_info("%s: phy reset failed\n", dev->name);
return -EINVAL;
}
} else {
@@ -4313,7 +4340,7 @@
spin_unlock(&np->lock);
netif_addr_unlock(dev);
netif_tx_unlock_bh(dev);
- printk(KERN_INFO "%s: link down.\n", dev->name);
+ pr_info("%s: link down\n", dev->name);
}
bmcr = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ);
@@ -4321,7 +4348,7 @@
bmcr |= BMCR_ANENABLE;
/* reset the phy in order for settings to stick*/
if (phy_reset(dev, bmcr)) {
- printk(KERN_INFO "%s: phy reset failed\n", dev->name);
+ pr_info("%s: phy reset failed\n", dev->name);
return -EINVAL;
}
} else {
@@ -4494,12 +4521,13 @@
if ((!np->autoneg && np->duplex == 0) ||
(np->autoneg && !pause->autoneg && np->duplex == 0)) {
- printk(KERN_INFO "%s: can not set pause settings when forced link is in half duplex.\n",
- dev->name);
+ pr_info("%s: can not set pause settings when forced link is in half duplex\n",
+ dev->name);
return -EINVAL;
}
if (pause->tx_pause && !(np->pause_flags & NV_PAUSEFRAME_TX_CAPABLE)) {
- printk(KERN_INFO "%s: hardware does not support tx pause frames.\n", dev->name);
+ pr_info("%s: hardware does not support tx pause frames\n",
+ dev->name);
return -EINVAL;
}
@@ -4534,7 +4562,7 @@
mii_rw(dev, np->phyaddr, MII_ADVERTISE, adv);
if (netif_running(dev))
- printk(KERN_INFO "%s: link down.\n", dev->name);
+ pr_info("%s: link down\n", dev->name);
bmcr = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ);
bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
mii_rw(dev, np->phyaddr, MII_BMCR, bmcr);
@@ -4796,8 +4824,8 @@
pkt_len = ETH_DATA_LEN;
tx_skb = dev_alloc_skb(pkt_len);
if (!tx_skb) {
- printk(KERN_ERR "dev_alloc_skb() failed during loopback test"
- " of %s\n", dev->name);
+ pr_err("dev_alloc_skb() failed during loopback test of %s\n",
+ dev->name);
ret = 0;
goto out;
}
@@ -5160,7 +5188,7 @@
if (reg_delay(dev, NvRegUnknownSetupReg5,
NVREG_UNKSETUP5_BIT31, NVREG_UNKSETUP5_BIT31,
NV_SETUP5_DELAY, NV_SETUP5_DELAYMAX))
- printk(KERN_INFO "open: SetupReg5, Bit 31 remained off\n");
+ pr_info("%s: SetupReg5, Bit 31 remained off\n", __func__);
writel(0, base + NvRegMIIMask);
writel(NVREG_IRQSTAT_MASK, base + NvRegIrqStatus);
@@ -5249,7 +5277,7 @@
if (ret) {
netif_carrier_on(dev);
} else {
- printk(KERN_INFO "%s: no link during initialization.\n", dev->name);
+ pr_info("%s: no link during initialization\n", dev->name);
netif_carrier_off(dev);
}
if (oom)
@@ -5361,8 +5389,8 @@
static int printed_version;
if (!printed_version++)
- printk(KERN_INFO "%s: Reverse Engineered nForce ethernet"
- " driver. Version %s.\n", DRV_NAME, FORCEDETH_VERSION);
+ pr_info("Reverse Engineered nForce ethernet driver. Version %s.\n",
+ FORCEDETH_VERSION);
dev = alloc_etherdev(sizeof(struct fe_priv));
err = -ENOMEM;