Merge tag 'pinctrl-v3.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull final pin control fix from Linus Walleij:
"A late pin control fix for the v3.19 series: The AT91 gpio controller
would miss wakeup events, this single fix make it work properly"
[ "Final"? Yeah, I'll believe that once I've actually released 3.19 ;) - Linus ]
* tag 'pinctrl-v3.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: at91: allow to have disabled gpio bank
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index dfd021e..f4cd0b9 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -177,7 +177,7 @@
struct device *dev;
struct pinctrl_dev *pctl;
- int nbanks;
+ int nactive_banks;
uint32_t *mux_mask;
int nmux;
@@ -653,12 +653,18 @@
int mux;
/* check if it's a valid config */
- if (pin->bank >= info->nbanks) {
+ if (pin->bank >= gpio_banks) {
dev_err(info->dev, "%s: pin conf %d bank_id %d >= nbanks %d\n",
- name, index, pin->bank, info->nbanks);
+ name, index, pin->bank, gpio_banks);
return -EINVAL;
}
+ if (!gpio_chips[pin->bank]) {
+ dev_err(info->dev, "%s: pin conf %d bank_id %d not enabled\n",
+ name, index, pin->bank);
+ return -ENXIO;
+ }
+
if (pin->pin >= MAX_NB_GPIO_PER_BANK) {
dev_err(info->dev, "%s: pin conf %d pin_bank_id %d >= %d\n",
name, index, pin->pin, MAX_NB_GPIO_PER_BANK);
@@ -981,7 +987,8 @@
for_each_child_of_node(np, child) {
if (of_device_is_compatible(child, gpio_compat)) {
- info->nbanks++;
+ if (of_device_is_available(child))
+ info->nactive_banks++;
} else {
info->nfunctions++;
info->ngroups += of_get_child_count(child);
@@ -1003,11 +1010,11 @@
}
size /= sizeof(*list);
- if (!size || size % info->nbanks) {
- dev_err(info->dev, "wrong mux mask array should be by %d\n", info->nbanks);
+ if (!size || size % gpio_banks) {
+ dev_err(info->dev, "wrong mux mask array should be by %d\n", gpio_banks);
return -EINVAL;
}
- info->nmux = size / info->nbanks;
+ info->nmux = size / gpio_banks;
info->mux_mask = devm_kzalloc(info->dev, sizeof(u32) * size, GFP_KERNEL);
if (!info->mux_mask) {
@@ -1131,7 +1138,7 @@
of_match_device(at91_pinctrl_of_match, &pdev->dev)->data;
at91_pinctrl_child_count(info, np);
- if (info->nbanks < 1) {
+ if (gpio_banks < 1) {
dev_err(&pdev->dev, "you need to specify at least one gpio-controller\n");
return -EINVAL;
}
@@ -1144,7 +1151,7 @@
dev_dbg(&pdev->dev, "mux-mask\n");
tmp = info->mux_mask;
- for (i = 0; i < info->nbanks; i++) {
+ for (i = 0; i < gpio_banks; i++) {
for (j = 0; j < info->nmux; j++, tmp++) {
dev_dbg(&pdev->dev, "%d:%d\t0x%x\n", i, j, tmp[0]);
}
@@ -1162,7 +1169,7 @@
if (!info->groups)
return -ENOMEM;
- dev_dbg(&pdev->dev, "nbanks = %d\n", info->nbanks);
+ dev_dbg(&pdev->dev, "nbanks = %d\n", gpio_banks);
dev_dbg(&pdev->dev, "nfunctions = %d\n", info->nfunctions);
dev_dbg(&pdev->dev, "ngroups = %d\n", info->ngroups);
@@ -1185,7 +1192,7 @@
{
struct at91_pinctrl *info;
struct pinctrl_pin_desc *pdesc;
- int ret, i, j, k;
+ int ret, i, j, k, ngpio_chips_enabled = 0;
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
if (!info)
@@ -1200,23 +1207,27 @@
* to obtain references to the struct gpio_chip * for them, and we
* need this to proceed.
*/
- for (i = 0; i < info->nbanks; i++) {
- if (!gpio_chips[i]) {
- dev_warn(&pdev->dev, "GPIO chip %d not registered yet\n", i);
- devm_kfree(&pdev->dev, info);
- return -EPROBE_DEFER;
- }
+ for (i = 0; i < gpio_banks; i++)
+ if (gpio_chips[i])
+ ngpio_chips_enabled++;
+
+ if (ngpio_chips_enabled < info->nactive_banks) {
+ dev_warn(&pdev->dev,
+ "All GPIO chips are not registered yet (%d/%d)\n",
+ ngpio_chips_enabled, info->nactive_banks);
+ devm_kfree(&pdev->dev, info);
+ return -EPROBE_DEFER;
}
at91_pinctrl_desc.name = dev_name(&pdev->dev);
- at91_pinctrl_desc.npins = info->nbanks * MAX_NB_GPIO_PER_BANK;
+ at91_pinctrl_desc.npins = gpio_banks * MAX_NB_GPIO_PER_BANK;
at91_pinctrl_desc.pins = pdesc =
devm_kzalloc(&pdev->dev, sizeof(*pdesc) * at91_pinctrl_desc.npins, GFP_KERNEL);
if (!at91_pinctrl_desc.pins)
return -ENOMEM;
- for (i = 0 , k = 0; i < info->nbanks; i++) {
+ for (i = 0, k = 0; i < gpio_banks; i++) {
for (j = 0; j < MAX_NB_GPIO_PER_BANK; j++, k++) {
pdesc->number = k;
pdesc->name = kasprintf(GFP_KERNEL, "pio%c%d", i + 'A', j);
@@ -1234,8 +1245,9 @@
}
/* We will handle a range of GPIO pins */
- for (i = 0; i < info->nbanks; i++)
- pinctrl_add_gpio_range(info->pctl, &gpio_chips[i]->range);
+ for (i = 0; i < gpio_banks; i++)
+ if (gpio_chips[i])
+ pinctrl_add_gpio_range(info->pctl, &gpio_chips[i]->range);
dev_info(&pdev->dev, "initialized AT91 pinctrl driver\n");
@@ -1613,9 +1625,10 @@
static int at91_gpio_of_irq_setup(struct platform_device *pdev,
struct at91_gpio_chip *at91_gpio)
{
+ struct gpio_chip *gpiochip_prev = NULL;
struct at91_gpio_chip *prev = NULL;
struct irq_data *d = irq_get_irq_data(at91_gpio->pioc_virq);
- int ret;
+ int ret, i;
at91_gpio->pioc_hwirq = irqd_to_hwirq(d);
@@ -1641,24 +1654,33 @@
return ret;
}
- /* Setup chained handler */
- if (at91_gpio->pioc_idx)
- prev = gpio_chips[at91_gpio->pioc_idx - 1];
-
/* The top level handler handles one bank of GPIOs, except
* on some SoC it can handle up to three...
* We only set up the handler for the first of the list.
*/
- if (prev && prev->next == at91_gpio)
+ gpiochip_prev = irq_get_handler_data(at91_gpio->pioc_virq);
+ if (!gpiochip_prev) {
+ /* Then register the chain on the parent IRQ */
+ gpiochip_set_chained_irqchip(&at91_gpio->chip,
+ &gpio_irqchip,
+ at91_gpio->pioc_virq,
+ gpio_irq_handler);
return 0;
+ }
- /* Then register the chain on the parent IRQ */
- gpiochip_set_chained_irqchip(&at91_gpio->chip,
- &gpio_irqchip,
- at91_gpio->pioc_virq,
- gpio_irq_handler);
+ prev = container_of(gpiochip_prev, struct at91_gpio_chip, chip);
- return 0;
+ /* we can only have 2 banks before */
+ for (i = 0; i < 2; i++) {
+ if (prev->next) {
+ prev = prev->next;
+ } else {
+ prev->next = at91_gpio;
+ return 0;
+ }
+ }
+
+ return -EINVAL;
}
/* This structure is replicated for each GPIO block allocated at probe time */
@@ -1675,24 +1697,6 @@
.ngpio = MAX_NB_GPIO_PER_BANK,
};
-static void at91_gpio_probe_fixup(void)
-{
- unsigned i;
- struct at91_gpio_chip *at91_gpio, *last = NULL;
-
- for (i = 0; i < gpio_banks; i++) {
- at91_gpio = gpio_chips[i];
-
- /*
- * GPIO controller are grouped on some SoC:
- * PIOC, PIOD and PIOE can share the same IRQ line
- */
- if (last && last->pioc_virq == at91_gpio->pioc_virq)
- last->next = at91_gpio;
- last = at91_gpio;
- }
-}
-
static struct of_device_id at91_gpio_of_match[] = {
{ .compatible = "atmel,at91sam9x5-gpio", .data = &at91sam9x5_ops, },
{ .compatible = "atmel,at91rm9200-gpio", .data = &at91rm9200_ops },
@@ -1805,8 +1809,6 @@
gpio_chips[alias_idx] = at91_chip;
gpio_banks = max(gpio_banks, alias_idx + 1);
- at91_gpio_probe_fixup();
-
ret = at91_gpio_of_irq_setup(pdev, at91_chip);
if (ret)
goto irq_setup_err;