ARM: 6337/2: AB8500 I2C platform configuration and irq
This patch adds the platform part of the AB8500 PRCMU I2C
access driver. The old irq name AB4500 is changed to AB8500.
Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index de31032..642b8e6 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -28,6 +28,7 @@
#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/devices.h>
+#include <mach/irqs.h>
#include "pins-db8500.h"
#include "board-mop500.h"
@@ -76,9 +77,27 @@
.irq_base = MOP500_AB8500_IRQ_BASE,
};
-static struct spi_board_info u8500_spi_devices[] = {
+static struct resource ab8500_resources[] = {
+ [0] = {
+ .start = IRQ_AB8500,
+ .end = IRQ_AB8500,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+struct platform_device ab8500_device = {
+ .name = "ab8500-i2c",
+ .id = 0,
+ .dev = {
+ .platform_data = &ab8500_platdata,
+ },
+ .num_resources = 1,
+ .resource = ab8500_resources,
+};
+
+static struct spi_board_info ab8500_spi_devices[] = {
{
- .modalias = "ab8500",
+ .modalias = "ab8500-spi",
.controller_data = &ab4500_chip_info,
.platform_data = &ab8500_platdata,
.max_speed_hz = 12000000,
@@ -166,8 +185,12 @@
mop500_sdi_init();
- spi_register_board_info(u8500_spi_devices,
- ARRAY_SIZE(u8500_spi_devices));
+ /* If HW is early drop (ED) or V1.0 then use SPI to access AB8500 */
+ if (cpu_is_u8500ed() || cpu_is_u8500v10())
+ spi_register_board_info(ab8500_spi_devices,
+ ARRAY_SIZE(ab8500_spi_devices));
+ else /* If HW is v.1.1 or later use I2C to access AB8500 */
+ platform_device_register(&ab8500_device);
}
MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h
index 0e7a2ce..0d552d9 100644
--- a/arch/arm/mach-ux500/include/mach/irqs.h
+++ b/arch/arm/mach-ux500/include/mach/irqs.h
@@ -40,7 +40,7 @@
#define IRQ_HSIR_CH1_OVRRUN (IRQ_SHPI_START + 33)
#define IRQ_HSIR_CH2_OVRRUN (IRQ_SHPI_START + 34)
#define IRQ_HSIR_CH3_OVRRUN (IRQ_SHPI_START + 35)
-#define IRQ_AB4500 (IRQ_SHPI_START + 40)
+#define IRQ_AB8500 (IRQ_SHPI_START + 40)
#define IRQ_PRCMU (IRQ_SHPI_START + 47)
#define IRQ_DISP (IRQ_SHPI_START + 48)
#define IRQ_SiPI3 (IRQ_SHPI_START + 49)