PCI: imx6: Use generic DesignWare accessors
The dw_pcie_readl_rc() and dw_pcie_writel_rc() interfaces already add in
pp->dbi_base, so use those instead of doing it ourselves in the imx6
driver. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c
index 7dfe400..bedd436 100644
--- a/drivers/pci/host/pci-imx6.c
+++ b/drivers/pci/host/pci-imx6.c
@@ -97,13 +97,13 @@
static int pcie_phy_poll_ack(struct imx6_pcie *imx6_pcie, int exp_val)
{
- void __iomem *dbi_base = imx6_pcie->pp.dbi_base;
+ struct pcie_port *pp = &imx6_pcie->pp;
u32 val;
u32 max_iterations = 10;
u32 wait_counter = 0;
do {
- val = readl(dbi_base + PCIE_PHY_STAT);
+ val = dw_pcie_readl_rc(pp, PCIE_PHY_STAT);
val = (val >> PCIE_PHY_STAT_ACK_LOC) & 0x1;
wait_counter++;
@@ -118,22 +118,22 @@
static int pcie_phy_wait_ack(struct imx6_pcie *imx6_pcie, int addr)
{
- void __iomem *dbi_base = imx6_pcie->pp.dbi_base;
+ struct pcie_port *pp = &imx6_pcie->pp;
u32 val;
int ret;
val = addr << PCIE_PHY_CTRL_DATA_LOC;
- writel(val, dbi_base + PCIE_PHY_CTRL);
+ dw_pcie_writel_rc(pp, PCIE_PHY_CTRL, val);
val |= (0x1 << PCIE_PHY_CTRL_CAP_ADR_LOC);
- writel(val, dbi_base + PCIE_PHY_CTRL);
+ dw_pcie_writel_rc(pp, PCIE_PHY_CTRL, val);
ret = pcie_phy_poll_ack(imx6_pcie, 1);
if (ret)
return ret;
val = addr << PCIE_PHY_CTRL_DATA_LOC;
- writel(val, dbi_base + PCIE_PHY_CTRL);
+ dw_pcie_writel_rc(pp, PCIE_PHY_CTRL, val);
return pcie_phy_poll_ack(imx6_pcie, 0);
}
@@ -141,7 +141,7 @@
/* Read from the 16-bit PCIe PHY control registers (not memory-mapped) */
static int pcie_phy_read(struct imx6_pcie *imx6_pcie, int addr, int *data)
{
- void __iomem *dbi_base = imx6_pcie->pp.dbi_base;
+ struct pcie_port *pp = &imx6_pcie->pp;
u32 val, phy_ctl;
int ret;
@@ -151,24 +151,24 @@
/* assert Read signal */
phy_ctl = 0x1 << PCIE_PHY_CTRL_RD_LOC;
- writel(phy_ctl, dbi_base + PCIE_PHY_CTRL);
+ dw_pcie_writel_rc(pp, PCIE_PHY_CTRL, phy_ctl);
ret = pcie_phy_poll_ack(imx6_pcie, 1);
if (ret)
return ret;
- val = readl(dbi_base + PCIE_PHY_STAT);
+ val = dw_pcie_readl_rc(pp, PCIE_PHY_STAT);
*data = val & 0xffff;
/* deassert Read signal */
- writel(0x00, dbi_base + PCIE_PHY_CTRL);
+ dw_pcie_writel_rc(pp, PCIE_PHY_CTRL, 0x00);
return pcie_phy_poll_ack(imx6_pcie, 0);
}
static int pcie_phy_write(struct imx6_pcie *imx6_pcie, int addr, int data)
{
- void __iomem *dbi_base = imx6_pcie->pp.dbi_base;
+ struct pcie_port *pp = &imx6_pcie->pp;
u32 var;
int ret;
@@ -179,11 +179,11 @@
return ret;
var = data << PCIE_PHY_CTRL_DATA_LOC;
- writel(var, dbi_base + PCIE_PHY_CTRL);
+ dw_pcie_writel_rc(pp, PCIE_PHY_CTRL, var);
/* capture data */
var |= (0x1 << PCIE_PHY_CTRL_CAP_DAT_LOC);
- writel(var, dbi_base + PCIE_PHY_CTRL);
+ dw_pcie_writel_rc(pp, PCIE_PHY_CTRL, var);
ret = pcie_phy_poll_ack(imx6_pcie, 1);
if (ret)
@@ -191,7 +191,7 @@
/* deassert cap data */
var = data << PCIE_PHY_CTRL_DATA_LOC;
- writel(var, dbi_base + PCIE_PHY_CTRL);
+ dw_pcie_writel_rc(pp, PCIE_PHY_CTRL, var);
/* wait for ack de-assertion */
ret = pcie_phy_poll_ack(imx6_pcie, 0);
@@ -200,7 +200,7 @@
/* assert wr signal */
var = 0x1 << PCIE_PHY_CTRL_WR_LOC;
- writel(var, dbi_base + PCIE_PHY_CTRL);
+ dw_pcie_writel_rc(pp, PCIE_PHY_CTRL, var);
/* wait for ack */
ret = pcie_phy_poll_ack(imx6_pcie, 1);
@@ -209,14 +209,14 @@
/* deassert wr signal */
var = data << PCIE_PHY_CTRL_DATA_LOC;
- writel(var, dbi_base + PCIE_PHY_CTRL);
+ dw_pcie_writel_rc(pp, PCIE_PHY_CTRL, var);
/* wait for ack de-assertion */
ret = pcie_phy_poll_ack(imx6_pcie, 0);
if (ret)
return ret;
- writel(0x0, dbi_base + PCIE_PHY_CTRL);
+ dw_pcie_writel_rc(pp, PCIE_PHY_CTRL, 0x0);
return 0;
}
@@ -284,10 +284,10 @@
if ((gpr1 & IMX6Q_GPR1_PCIE_REF_CLK_EN) &&
(gpr12 & IMX6Q_GPR12_PCIE_CTL_2)) {
- val = readl(pp->dbi_base + PCIE_PL_PFLR);
+ val = dw_pcie_readl_rc(pp, PCIE_PL_PFLR);
val &= ~PCIE_PL_PFLR_LINK_STATE_MASK;
val |= PCIE_PL_PFLR_FORCE_LINK;
- writel(val, pp->dbi_base + PCIE_PL_PFLR);
+ dw_pcie_writel_rc(pp, PCIE_PL_PFLR, val);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6Q_GPR12_PCIE_CTL_2, 0 << 10);
@@ -452,8 +452,8 @@
return 0;
dev_dbg(dev, "DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n",
- readl(pp->dbi_base + PCIE_PHY_DEBUG_R0),
- readl(pp->dbi_base + PCIE_PHY_DEBUG_R1));
+ dw_pcie_readl_rc(pp, PCIE_PHY_DEBUG_R0),
+ dw_pcie_readl_rc(pp, PCIE_PHY_DEBUG_R1));
return -ETIMEDOUT;
}
@@ -465,7 +465,7 @@
unsigned int retries;
for (retries = 0; retries < 200; retries++) {
- tmp = readl(pp->dbi_base + PCIE_LINK_WIDTH_SPEED_CONTROL);
+ tmp = dw_pcie_readl_rc(pp, PCIE_LINK_WIDTH_SPEED_CONTROL);
/* Test if the speed change finished. */
if (!(tmp & PORT_LOGIC_SPEED_CHANGE))
return 0;
@@ -496,10 +496,10 @@
* started in Gen2 mode, there is a possibility the devices on the
* bus will not be detected at all. This happens with PCIe switches.
*/
- tmp = readl(pp->dbi_base + PCIE_RC_LCR);
+ tmp = dw_pcie_readl_rc(pp, PCIE_RC_LCR);
tmp &= ~PCIE_RC_LCR_MAX_LINK_SPEEDS_MASK;
tmp |= PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN1;
- writel(tmp, pp->dbi_base + PCIE_RC_LCR);
+ dw_pcie_writel_rc(pp, PCIE_RC_LCR, tmp);
/* Start LTSSM. */
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
@@ -513,10 +513,10 @@
if (imx6_pcie->link_gen == 2) {
/* Allow Gen2 mode after the link is up. */
- tmp = readl(pp->dbi_base + PCIE_RC_LCR);
+ tmp = dw_pcie_readl_rc(pp, PCIE_RC_LCR);
tmp &= ~PCIE_RC_LCR_MAX_LINK_SPEEDS_MASK;
tmp |= PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN2;
- writel(tmp, pp->dbi_base + PCIE_RC_LCR);
+ dw_pcie_writel_rc(pp, PCIE_RC_LCR, tmp);
} else {
dev_info(dev, "Link: Gen2 disabled\n");
}
@@ -525,9 +525,9 @@
* Start Directed Speed Change so the best possible speed both link
* partners support can be negotiated.
*/
- tmp = readl(pp->dbi_base + PCIE_LINK_WIDTH_SPEED_CONTROL);
+ tmp = dw_pcie_readl_rc(pp, PCIE_LINK_WIDTH_SPEED_CONTROL);
tmp |= PORT_LOGIC_SPEED_CHANGE;
- writel(tmp, pp->dbi_base + PCIE_LINK_WIDTH_SPEED_CONTROL);
+ dw_pcie_writel_rc(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, tmp);
ret = imx6_pcie_wait_for_speed_change(imx6_pcie);
if (ret) {
@@ -542,16 +542,15 @@
goto err_reset_phy;
}
- tmp = readl(pp->dbi_base + PCIE_RC_LCSR);
+ tmp = dw_pcie_readl_rc(pp, PCIE_RC_LCSR);
dev_info(dev, "Link up, Gen%i\n", (tmp >> 16) & 0xf);
return 0;
err_reset_phy:
dev_dbg(dev, "PHY DEBUG_R0=0x%08x DEBUG_R1=0x%08x\n",
- readl(pp->dbi_base + PCIE_PHY_DEBUG_R0),
- readl(pp->dbi_base + PCIE_PHY_DEBUG_R1));
- imx6_pcie_reset_phy(pp);
-
+ dw_pcie_readl_rc(pp, PCIE_PHY_DEBUG_R0),
+ dw_pcie_readl_rc(pp, PCIE_PHY_DEBUG_R1));
+ imx6_pcie_reset_phy(imx6_pcie);
return ret;
}
@@ -571,7 +570,7 @@
static int imx6_pcie_link_up(struct pcie_port *pp)
{
- return readl(pp->dbi_base + PCIE_PHY_DEBUG_R1) &
+ return dw_pcie_readl_rc(pp, PCIE_PHY_DEBUG_R1) &
PCIE_PHY_DEBUG_R1_XMLH_LINK_UP;
}