remoteproc: Move qcom_mdt_loader into drivers/soc/qcom
With the remoteproc parts cleaned out of the MDT loader we can move it
to drivers/soc/qcom.
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index 71ea703..555dba0 100644
--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -87,9 +87,6 @@
config QCOM_RPROC_COMMON
tristate
-config QCOM_MDT_LOADER
- tristate
-
config QCOM_Q6V5_PIL
tristate "Qualcomm Hexagon V5 Peripherial Image Loader"
depends on OF && ARCH_QCOM
diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
index d4f9525..ffc5e43 100644
--- a/drivers/remoteproc/Makefile
+++ b/drivers/remoteproc/Makefile
@@ -12,7 +12,6 @@
obj-$(CONFIG_WKUP_M3_RPROC) += wkup_m3_rproc.o
obj-$(CONFIG_DA8XX_REMOTEPROC) += da8xx_remoteproc.o
obj-$(CONFIG_QCOM_ADSP_PIL) += qcom_adsp_pil.o
-obj-$(CONFIG_QCOM_MDT_LOADER) += qcom_mdt_loader.o
obj-$(CONFIG_QCOM_RPROC_COMMON) += qcom_common.o
obj-$(CONFIG_QCOM_Q6V5_PIL) += qcom_q6v5_pil.o
obj-$(CONFIG_QCOM_WCNSS_PIL) += qcom_wcnss_pil.o
diff --git a/drivers/remoteproc/qcom_adsp_pil.c b/drivers/remoteproc/qcom_adsp_pil.c
index c1ee5c8..301b820 100644
--- a/drivers/remoteproc/qcom_adsp_pil.c
+++ b/drivers/remoteproc/qcom_adsp_pil.c
@@ -26,11 +26,11 @@
#include <linux/qcom_scm.h>
#include <linux/regulator/consumer.h>
#include <linux/remoteproc.h>
+#include <linux/soc/qcom/mdt_loader.h>
#include <linux/soc/qcom/smem.h>
#include <linux/soc/qcom/smem_state.h>
#include "qcom_common.h"
-#include "qcom_mdt_loader.h"
#include "remoteproc_internal.h"
struct adsp_data {
diff --git a/drivers/remoteproc/qcom_q6v5_pil.c b/drivers/remoteproc/qcom_q6v5_pil.c
index 2e44c06..b129261 100644
--- a/drivers/remoteproc/qcom_q6v5_pil.c
+++ b/drivers/remoteproc/qcom_q6v5_pil.c
@@ -29,12 +29,12 @@
#include <linux/regulator/consumer.h>
#include <linux/remoteproc.h>
#include <linux/reset.h>
+#include <linux/soc/qcom/mdt_loader.h>
#include <linux/soc/qcom/smem.h>
#include <linux/soc/qcom/smem_state.h>
#include "remoteproc_internal.h"
#include "qcom_common.h"
-#include "qcom_mdt_loader.h"
#include <linux/qcom_scm.h>
diff --git a/drivers/remoteproc/qcom_wcnss.c b/drivers/remoteproc/qcom_wcnss.c
index fbb25ea..781211c 100644
--- a/drivers/remoteproc/qcom_wcnss.c
+++ b/drivers/remoteproc/qcom_wcnss.c
@@ -28,12 +28,12 @@
#include <linux/qcom_scm.h>
#include <linux/regulator/consumer.h>
#include <linux/remoteproc.h>
+#include <linux/soc/qcom/mdt_loader.h>
#include <linux/soc/qcom/smem.h>
#include <linux/soc/qcom/smem_state.h>
#include <linux/rpmsg/qcom_smd.h>
#include "qcom_common.h"
-#include "qcom_mdt_loader.h"
#include "remoteproc_internal.h"
#include "qcom_wcnss.h"
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index 461b387..78b1bb7 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -10,6 +10,10 @@
functions for connecting the underlying serial UART, SPI, and I2C
devices to the output pins.
+config QCOM_MDT_LOADER
+ tristate
+ select QCOM_SCM
+
config QCOM_PM
bool "Qualcomm Power Management"
depends on ARCH_QCOM && !ARM64
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index fdd664e..1f30260 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -1,4 +1,5 @@
obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o
+obj-$(CONFIG_QCOM_MDT_LOADER) += mdt_loader.o
obj-$(CONFIG_QCOM_PM) += spm.o
obj-$(CONFIG_QCOM_SMD) += smd.o
obj-$(CONFIG_QCOM_SMD_RPM) += smd-rpm.o
diff --git a/drivers/remoteproc/qcom_mdt_loader.c b/drivers/soc/qcom/mdt_loader.c
similarity index 98%
rename from drivers/remoteproc/qcom_mdt_loader.c
rename to drivers/soc/qcom/mdt_loader.c
index 790ab31..98b2373 100644
--- a/drivers/remoteproc/qcom_mdt_loader.c
+++ b/drivers/soc/qcom/mdt_loader.c
@@ -23,8 +23,7 @@
#include <linux/qcom_scm.h>
#include <linux/sizes.h>
#include <linux/slab.h>
-
-#include "qcom_mdt_loader.h"
+#include <linux/soc/qcom/mdt_loader.h>
static bool mdt_phdr_valid(const struct elf32_phdr *phdr)
{
diff --git a/drivers/remoteproc/qcom_mdt_loader.h b/include/linux/soc/qcom/mdt_loader.h
similarity index 86%
rename from drivers/remoteproc/qcom_mdt_loader.h
rename to include/linux/soc/qcom/mdt_loader.h
index ff6e45b..f423001 100644
--- a/drivers/remoteproc/qcom_mdt_loader.h
+++ b/include/linux/soc/qcom/mdt_loader.h
@@ -1,10 +1,15 @@
#ifndef __QCOM_MDT_LOADER_H__
#define __QCOM_MDT_LOADER_H__
+#include <linux/types.h>
+
#define QCOM_MDT_TYPE_MASK (7 << 24)
#define QCOM_MDT_TYPE_HASH (2 << 24)
#define QCOM_MDT_RELOCATABLE BIT(27)
+struct device;
+struct firmware;
+
ssize_t qcom_mdt_get_size(const struct firmware *fw);
int qcom_mdt_load(struct device *dev, const struct firmware *fw,
const char *fw_name, int pas_id, void *mem_region,