blob: cbcd7c324ab97a55120ab3542bc0e23703c77030 [file] [log] [blame]
/*
* wm8580.c -- WM8580 ALSA Soc Audio driver
*
* Copyright 2008 Wolfson Microelectronics PLC.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* Notes:
* The WM8580 is a multichannel codec with S/PDIF support, featuring six
* DAC channels and two ADC channels.
*
* Currently only the primary audio interface is supported - S/PDIF and
* the secondary audio interfaces are not.
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include <sound/tlv.h>
#include <sound/initval.h>
#include <asm/div64.h>
#include "wm8580.h"
#define WM8580_VERSION "0.1"
struct pll_state {
unsigned int in;
unsigned int out;
};
/* codec private data */
struct wm8580_priv {
struct pll_state a;
struct pll_state b;
};
/* WM8580 register space */
#define WM8580_PLLA1 0x00
#define WM8580_PLLA2 0x01
#define WM8580_PLLA3 0x02
#define WM8580_PLLA4 0x03
#define WM8580_PLLB1 0x04
#define WM8580_PLLB2 0x05
#define WM8580_PLLB3 0x06
#define WM8580_PLLB4 0x07
#define WM8580_CLKSEL 0x08
#define WM8580_PAIF1 0x09
#define WM8580_PAIF2 0x0A
#define WM8580_SAIF1 0x0B
#define WM8580_PAIF3 0x0C
#define WM8580_PAIF4 0x0D
#define WM8580_SAIF2 0x0E
#define WM8580_DAC_CONTROL1 0x0F
#define WM8580_DAC_CONTROL2 0x10
#define WM8580_DAC_CONTROL3 0x11
#define WM8580_DAC_CONTROL4 0x12
#define WM8580_DAC_CONTROL5 0x13
#define WM8580_DIGITAL_ATTENUATION_DACL1 0x14
#define WM8580_DIGITAL_ATTENUATION_DACR1 0x15
#define WM8580_DIGITAL_ATTENUATION_DACL2 0x16
#define WM8580_DIGITAL_ATTENUATION_DACR2 0x17
#define WM8580_DIGITAL_ATTENUATION_DACL3 0x18
#define WM8580_DIGITAL_ATTENUATION_DACR3 0x19
#define WM8580_MASTER_DIGITAL_ATTENUATION 0x1C
#define WM8580_ADC_CONTROL1 0x1D
#define WM8580_SPDTXCHAN0 0x1E
#define WM8580_SPDTXCHAN1 0x1F
#define WM8580_SPDTXCHAN2 0x20
#define WM8580_SPDTXCHAN3 0x21
#define WM8580_SPDTXCHAN4 0x22
#define WM8580_SPDTXCHAN5 0x23
#define WM8580_SPDMODE 0x24
#define WM8580_INTMASK 0x25
#define WM8580_GPO1 0x26
#define WM8580_GPO2 0x27
#define WM8580_GPO3 0x28
#define WM8580_GPO4 0x29
#define WM8580_GPO5 0x2A
#define WM8580_INTSTAT 0x2B
#define WM8580_SPDRXCHAN1 0x2C
#define WM8580_SPDRXCHAN2 0x2D
#define WM8580_SPDRXCHAN3 0x2E
#define WM8580_SPDRXCHAN4 0x2F
#define WM8580_SPDRXCHAN5 0x30
#define WM8580_SPDSTAT 0x31
#define WM8580_PWRDN1 0x32
#define WM8580_PWRDN2 0x33
#define WM8580_READBACK 0x34
#define WM8580_RESET 0x35
/* PLLB4 (register 7h) */
#define WM8580_PLLB4_MCLKOUTSRC_MASK 0x60
#define WM8580_PLLB4_MCLKOUTSRC_PLLA 0x20
#define WM8580_PLLB4_MCLKOUTSRC_PLLB 0x40
#define WM8580_PLLB4_MCLKOUTSRC_OSC 0x60
#define WM8580_PLLB4_CLKOUTSRC_MASK 0x180
#define WM8580_PLLB4_CLKOUTSRC_PLLACLK 0x080
#define WM8580_PLLB4_CLKOUTSRC_PLLBCLK 0x100
#define WM8580_PLLB4_CLKOUTSRC_OSCCLK 0x180
/* CLKSEL (register 8h) */
#define WM8580_CLKSEL_DAC_CLKSEL_MASK 0x03
#define WM8580_CLKSEL_DAC_CLKSEL_PLLA 0x01
#define WM8580_CLKSEL_DAC_CLKSEL_PLLB 0x02
/* AIF control 1 (registers 9h-bh) */
#define WM8580_AIF_RATE_MASK 0x7
#define WM8580_AIF_RATE_128 0x0
#define WM8580_AIF_RATE_192 0x1
#define WM8580_AIF_RATE_256 0x2
#define WM8580_AIF_RATE_384 0x3
#define WM8580_AIF_RATE_512 0x4
#define WM8580_AIF_RATE_768 0x5
#define WM8580_AIF_RATE_1152 0x6
#define WM8580_AIF_BCLKSEL_MASK 0x18
#define WM8580_AIF_BCLKSEL_64 0x00
#define WM8580_AIF_BCLKSEL_128 0x08
#define WM8580_AIF_BCLKSEL_256 0x10
#define WM8580_AIF_BCLKSEL_SYSCLK 0x18
#define WM8580_AIF_MS 0x20
#define WM8580_AIF_CLKSRC_MASK 0xc0
#define WM8580_AIF_CLKSRC_PLLA 0x40
#define WM8580_AIF_CLKSRC_PLLB 0x40
#define WM8580_AIF_CLKSRC_MCLK 0xc0
/* AIF control 2 (registers ch-eh) */
#define WM8580_AIF_FMT_MASK 0x03
#define WM8580_AIF_FMT_RIGHTJ 0x00
#define WM8580_AIF_FMT_LEFTJ 0x01
#define WM8580_AIF_FMT_I2S 0x02
#define WM8580_AIF_FMT_DSP 0x03
#define WM8580_AIF_LENGTH_MASK 0x0c
#define WM8580_AIF_LENGTH_16 0x00
#define WM8580_AIF_LENGTH_20 0x04
#define WM8580_AIF_LENGTH_24 0x08
#define WM8580_AIF_LENGTH_32 0x0c
#define WM8580_AIF_LRP 0x10
#define WM8580_AIF_BCP 0x20
/* Powerdown Register 1 (register 32h) */
#define WM8580_PWRDN1_PWDN 0x001
#define WM8580_PWRDN1_ALLDACPD 0x040
/* Powerdown Register 2 (register 33h) */
#define WM8580_PWRDN2_OSSCPD 0x001
#define WM8580_PWRDN2_PLLAPD 0x002
#define WM8580_PWRDN2_PLLBPD 0x004
#define WM8580_PWRDN2_SPDIFPD 0x008
#define WM8580_PWRDN2_SPDIFTXD 0x010
#define WM8580_PWRDN2_SPDIFRXD 0x020
#define WM8580_DAC_CONTROL5_MUTEALL 0x10
/*
* wm8580 register cache
* We can't read the WM8580 register space when we
* are using 2 wire for device control, so we cache them instead.
*/
static const u16 wm8580_reg[] = {
0x0121, 0x017e, 0x007d, 0x0014, /*R3*/
0x0121, 0x017e, 0x007d, 0x0194, /*R7*/
0x001c, 0x0002, 0x0002, 0x00c2, /*R11*/
0x0182, 0x0082, 0x000a, 0x0024, /*R15*/
0x0009, 0x0000, 0x00ff, 0x0000, /*R19*/
0x00ff, 0x00ff, 0x00ff, 0x00ff, /*R23*/
0x00ff, 0x00ff, 0x00ff, 0x00ff, /*R27*/
0x01f0, 0x0040, 0x0000, 0x0000, /*R31(0x1F)*/
0x0000, 0x0000, 0x0031, 0x000b, /*R35*/
0x0039, 0x0000, 0x0010, 0x0032, /*R39*/
0x0054, 0x0076, 0x0098, 0x0000, /*R43(0x2B)*/
0x0000, 0x0000, 0x0000, 0x0000, /*R47*/
0x0000, 0x0000, 0x005e, 0x003e, /*R51(0x33)*/
0x0000, 0x0000 /*R53*/
};
/*
* read wm8580 register cache
*/
static inline unsigned int wm8580_read_reg_cache(struct snd_soc_codec *codec,
unsigned int reg)
{
u16 *cache = codec->reg_cache;
BUG_ON(reg > ARRAY_SIZE(wm8580_reg));
return cache[reg];
}
/*
* write wm8580 register cache
*/
static inline void wm8580_write_reg_cache(struct snd_soc_codec *codec,
unsigned int reg, unsigned int value)
{
u16 *cache = codec->reg_cache;
cache[reg] = value;
}
/*
* write to the WM8580 register space
*/
static int wm8580_write(struct snd_soc_codec *codec, unsigned int reg,
unsigned int value)
{
u8 data[2];
BUG_ON(reg > ARRAY_SIZE(wm8580_reg));
/* Registers are 9 bits wide */
value &= 0x1ff;
switch (reg) {
case WM8580_RESET:
/* Uncached */
break;
default:
if (value == wm8580_read_reg_cache(codec, reg))
return 0;
}
/* data is
* D15..D9 WM8580 register offset
* D8...D0 register data
*/
data[0] = (reg << 1) | ((value >> 8) & 0x0001);
data[1] = value & 0x00ff;
wm8580_write_reg_cache(codec, reg, value);
if (codec->hw_write(codec->control_data, data, 2) == 2)
return 0;
else
return -EIO;
}
static inline unsigned int wm8580_read(struct snd_soc_codec *codec,
unsigned int reg)
{
switch (reg) {
default:
return wm8580_read_reg_cache(codec, reg);
}
}
static const DECLARE_TLV_DB_SCALE(dac_tlv, -12750, 50, 1);
static int wm8580_out_vu(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
int reg = kcontrol->private_value & 0xff;
int reg2 = (kcontrol->private_value >> 24) & 0xff;
int ret;
u16 val;
/* Clear the register cache so we write without VU set */
wm8580_write_reg_cache(codec, reg, 0);
wm8580_write_reg_cache(codec, reg2, 0);
ret = snd_soc_put_volsw_2r(kcontrol, ucontrol);
if (ret < 0)
return ret;
/* Now write again with the volume update bit set */
val = wm8580_read_reg_cache(codec, reg);
wm8580_write(codec, reg, val | 0x0100);
val = wm8580_read_reg_cache(codec, reg2);
wm8580_write(codec, reg2, val | 0x0100);
return 0;
}
#define SOC_WM8580_OUT_DOUBLE_R_TLV(xname, reg_left, reg_right, shift, max, invert, tlv_array) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
SNDRV_CTL_ELEM_ACCESS_READWRITE, \
.tlv.p = (tlv_array), \
.info = snd_soc_info_volsw_2r, \
.get = snd_soc_get_volsw_2r, .put = wm8580_out_vu, \
.private_value = (reg_left) | ((shift) << 8) | \
((max) << 12) | ((invert) << 20) | ((reg_right) << 24) }
static const struct snd_kcontrol_new wm8580_snd_controls[] = {
SOC_WM8580_OUT_DOUBLE_R_TLV("DAC1 Playback Volume",
WM8580_DIGITAL_ATTENUATION_DACL1,
WM8580_DIGITAL_ATTENUATION_DACR1,
0, 0xff, 0, dac_tlv),
SOC_WM8580_OUT_DOUBLE_R_TLV("DAC2 Playback Volume",
WM8580_DIGITAL_ATTENUATION_DACL2,
WM8580_DIGITAL_ATTENUATION_DACR2,
0, 0xff, 0, dac_tlv),
SOC_WM8580_OUT_DOUBLE_R_TLV("DAC3 Playback Volume",
WM8580_DIGITAL_ATTENUATION_DACL3,
WM8580_DIGITAL_ATTENUATION_DACR3,
0, 0xff, 0, dac_tlv),
SOC_SINGLE("DAC1 Deemphasis Switch", WM8580_DAC_CONTROL3, 0, 1, 0),
SOC_SINGLE("DAC2 Deemphasis Switch", WM8580_DAC_CONTROL3, 1, 1, 0),
SOC_SINGLE("DAC3 Deemphasis Switch", WM8580_DAC_CONTROL3, 2, 1, 0),
SOC_DOUBLE("DAC1 Invert Switch", WM8580_DAC_CONTROL4, 0, 1, 1, 0),
SOC_DOUBLE("DAC2 Invert Switch", WM8580_DAC_CONTROL4, 2, 3, 1, 0),
SOC_DOUBLE("DAC3 Invert Switch", WM8580_DAC_CONTROL4, 4, 5, 1, 0),
SOC_SINGLE("DAC ZC Switch", WM8580_DAC_CONTROL5, 5, 1, 0),
SOC_SINGLE("DAC1 Switch", WM8580_DAC_CONTROL5, 0, 1, 0),
SOC_SINGLE("DAC2 Switch", WM8580_DAC_CONTROL5, 1, 1, 0),
SOC_SINGLE("DAC3 Switch", WM8580_DAC_CONTROL5, 2, 1, 0),
SOC_DOUBLE("ADC Mute Switch", WM8580_ADC_CONTROL1, 0, 1, 1, 0),
SOC_SINGLE("ADC High-Pass Filter Switch", WM8580_ADC_CONTROL1, 4, 1, 0),
};
/* Add non-DAPM controls */
static int wm8580_add_controls(struct snd_soc_codec *codec)
{
int err, i;
for (i = 0; i < ARRAY_SIZE(wm8580_snd_controls); i++) {
err = snd_ctl_add(codec->card,
snd_soc_cnew(&wm8580_snd_controls[i],
codec, NULL));
if (err < 0)
return err;
}
return 0;
}
static const struct snd_soc_dapm_widget wm8580_dapm_widgets[] = {
SND_SOC_DAPM_DAC("DAC1", "Playback", WM8580_PWRDN1, 2, 1),
SND_SOC_DAPM_DAC("DAC2", "Playback", WM8580_PWRDN1, 3, 1),
SND_SOC_DAPM_DAC("DAC3", "Playback", WM8580_PWRDN1, 4, 1),
SND_SOC_DAPM_OUTPUT("VOUT1L"),
SND_SOC_DAPM_OUTPUT("VOUT1R"),
SND_SOC_DAPM_OUTPUT("VOUT2L"),
SND_SOC_DAPM_OUTPUT("VOUT2R"),
SND_SOC_DAPM_OUTPUT("VOUT3L"),
SND_SOC_DAPM_OUTPUT("VOUT3R"),
SND_SOC_DAPM_ADC("ADC", "Capture", WM8580_PWRDN1, 1, 1),
SND_SOC_DAPM_INPUT("AINL"),
SND_SOC_DAPM_INPUT("AINR"),
};
static const struct snd_soc_dapm_route audio_map[] = {
{ "VOUT1L", NULL, "DAC1" },
{ "VOUT1R", NULL, "DAC1" },
{ "VOUT2L", NULL, "DAC2" },
{ "VOUT2R", NULL, "DAC2" },
{ "VOUT3L", NULL, "DAC3" },
{ "VOUT3R", NULL, "DAC3" },
{ "ADC", NULL, "AINL" },
{ "ADC", NULL, "AINR" },
};
static int wm8580_add_widgets(struct snd_soc_codec *codec)
{
snd_soc_dapm_new_controls(codec, wm8580_dapm_widgets,
ARRAY_SIZE(wm8580_dapm_widgets));
snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
snd_soc_dapm_new_widgets(codec);
return 0;
}
/* PLL divisors */
struct _pll_div {
u32 prescale:1;
u32 postscale:1;
u32 freqmode:2;
u32 n:4;
u32 k:24;
};
/* The size in bits of the pll divide */
#define FIXED_PLL_SIZE (1 << 22)
/* PLL rate to output rate divisions */
static struct {
unsigned int div;
unsigned int freqmode;
unsigned int postscale;
} post_table[] = {
{ 2, 0, 0 },
{ 4, 0, 1 },
{ 4, 1, 0 },
{ 8, 1, 1 },
{ 8, 2, 0 },
{ 16, 2, 1 },
{ 12, 3, 0 },
{ 24, 3, 1 }
};
static int pll_factors(struct _pll_div *pll_div, unsigned int target,
unsigned int source)
{
u64 Kpart;
unsigned int K, Ndiv, Nmod;
int i;
pr_debug("wm8580: PLL %dHz->%dHz\n", source, target);
/* Scale the output frequency up; the PLL should run in the
* region of 90-100MHz.
*/
for (i = 0; i < ARRAY_SIZE(post_table); i++) {
if (target * post_table[i].div >= 90000000 &&
target * post_table[i].div <= 100000000) {
pll_div->freqmode = post_table[i].freqmode;
pll_div->postscale = post_table[i].postscale;
target *= post_table[i].div;
break;
}
}
if (i == ARRAY_SIZE(post_table)) {
printk(KERN_ERR "wm8580: Unable to scale output frequency "
"%u\n", target);
return -EINVAL;
}
Ndiv = target / source;
if (Ndiv < 5) {
source /= 2;
pll_div->prescale = 1;
Ndiv = target / source;
} else
pll_div->prescale = 0;
if ((Ndiv < 5) || (Ndiv > 13)) {
printk(KERN_ERR
"WM8580 N=%d outside supported range\n", Ndiv);
return -EINVAL;
}
pll_div->n = Ndiv;
Nmod = target % source;
Kpart = FIXED_PLL_SIZE * (long long)Nmod;
do_div(Kpart, source);
K = Kpart & 0xFFFFFFFF;
pll_div->k = K;
pr_debug("PLL %x.%x prescale %d freqmode %d postscale %d\n",
pll_div->n, pll_div->k, pll_div->prescale, pll_div->freqmode,
pll_div->postscale);
return 0;
}
static int wm8580_set_dai_pll(struct snd_soc_dai *codec_dai,
int pll_id, unsigned int freq_in, unsigned int freq_out)
{
int offset;
struct snd_soc_codec *codec = codec_dai->codec;
struct wm8580_priv *wm8580 = codec->private_data;
struct pll_state *state;
struct _pll_div pll_div;
unsigned int reg;
unsigned int pwr_mask;
int ret;
/* GCC isn't able to work out the ifs below for initialising/using
* pll_div so suppress warnings.
*/
memset(&pll_div, 0, sizeof(pll_div));
switch (pll_id) {
case WM8580_PLLA:
state = &wm8580->a;
offset = 0;
pwr_mask = WM8580_PWRDN2_PLLAPD;
break;
case WM8580_PLLB:
state = &wm8580->b;
offset = 4;
pwr_mask = WM8580_PWRDN2_PLLBPD;
break;
default:
return -ENODEV;
}
if (freq_in && freq_out) {
ret = pll_factors(&pll_div, freq_out, freq_in);
if (ret != 0)
return ret;
}
state->in = freq_in;
state->out = freq_out;
/* Always disable the PLL - it is not safe to leave it running
* while reprogramming it.
*/
reg = wm8580_read(codec, WM8580_PWRDN2);
wm8580_write(codec, WM8580_PWRDN2, reg | pwr_mask);
if (!freq_in || !freq_out)
return 0;
wm8580_write(codec, WM8580_PLLA1 + offset, pll_div.k & 0x1ff);
wm8580_write(codec, WM8580_PLLA2 + offset, (pll_div.k >> 9) & 0xff);
wm8580_write(codec, WM8580_PLLA3 + offset,
(pll_div.k >> 18 & 0xf) | (pll_div.n << 4));
reg = wm8580_read(codec, WM8580_PLLA4 + offset);
reg &= ~0x3f;
reg |= pll_div.prescale | pll_div.postscale << 1 |
pll_div.freqmode << 4;
wm8580_write(codec, WM8580_PLLA4 + offset, reg);
/* All done, turn it on */
reg = wm8580_read(codec, WM8580_PWRDN2);
wm8580_write(codec, WM8580_PWRDN2, reg & ~pwr_mask);
return 0;
}
/*
* Set PCM DAI bit size and sample rate.
*/
static int wm8580_paif_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai_link *dai = rtd->dai;
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->codec;
u16 paifb = wm8580_read(codec, WM8580_PAIF3 + dai->codec_dai->id);
paifb &= ~WM8580_AIF_LENGTH_MASK;
/* bit size */
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
break;
case SNDRV_PCM_FORMAT_S20_3LE:
paifb |= WM8580_AIF_LENGTH_20;
break;
case SNDRV_PCM_FORMAT_S24_LE:
paifb |= WM8580_AIF_LENGTH_24;
break;
case SNDRV_PCM_FORMAT_S32_LE:
paifb |= WM8580_AIF_LENGTH_24;
break;
default:
return -EINVAL;
}
wm8580_write(codec, WM8580_PAIF3 + dai->codec_dai->id, paifb);
return 0;
}
static int wm8580_set_paif_dai_fmt(struct snd_soc_dai *codec_dai,
unsigned int fmt)
{
struct snd_soc_codec *codec = codec_dai->codec;
unsigned int aifa;
unsigned int aifb;
int can_invert_lrclk;
aifa = wm8580_read(codec, WM8580_PAIF1 + codec_dai->id);
aifb = wm8580_read(codec, WM8580_PAIF3 + codec_dai->id);
aifb &= ~(WM8580_AIF_FMT_MASK | WM8580_AIF_LRP | WM8580_AIF_BCP);
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBS_CFS:
aifa &= ~WM8580_AIF_MS;
break;
case SND_SOC_DAIFMT_CBM_CFM:
aifa |= WM8580_AIF_MS;
break;
default:
return -EINVAL;
}
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
can_invert_lrclk = 1;
aifb |= WM8580_AIF_FMT_I2S;
break;
case SND_SOC_DAIFMT_RIGHT_J:
can_invert_lrclk = 1;
aifb |= WM8580_AIF_FMT_RIGHTJ;
break;
case SND_SOC_DAIFMT_LEFT_J:
can_invert_lrclk = 1;
aifb |= WM8580_AIF_FMT_LEFTJ;
break;
case SND_SOC_DAIFMT_DSP_A:
can_invert_lrclk = 0;
aifb |= WM8580_AIF_FMT_DSP;
break;
case SND_SOC_DAIFMT_DSP_B:
can_invert_lrclk = 0;
aifb |= WM8580_AIF_FMT_DSP;
aifb |= WM8580_AIF_LRP;
break;
default:
return -EINVAL;
}
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_NF:
break;
case SND_SOC_DAIFMT_IB_IF:
if (!can_invert_lrclk)
return -EINVAL;
aifb |= WM8580_AIF_BCP;
aifb |= WM8580_AIF_LRP;
break;
case SND_SOC_DAIFMT_IB_NF:
aifb |= WM8580_AIF_BCP;
break;
case SND_SOC_DAIFMT_NB_IF:
if (!can_invert_lrclk)
return -EINVAL;
aifb |= WM8580_AIF_LRP;
break;
default:
return -EINVAL;
}
wm8580_write(codec, WM8580_PAIF1 + codec_dai->id, aifa);
wm8580_write(codec, WM8580_PAIF3 + codec_dai->id, aifb);
return 0;
}
static int wm8580_set_dai_clkdiv(struct snd_soc_dai *codec_dai,
int div_id, int div)
{
struct snd_soc_codec *codec = codec_dai->codec;
unsigned int reg;
switch (div_id) {
case WM8580_MCLK:
reg = wm8580_read(codec, WM8580_PLLB4);
reg &= ~WM8580_PLLB4_MCLKOUTSRC_MASK;
switch (div) {
case WM8580_CLKSRC_MCLK:
/* Input */
break;
case WM8580_CLKSRC_PLLA:
reg |= WM8580_PLLB4_MCLKOUTSRC_PLLA;
break;
case WM8580_CLKSRC_PLLB:
reg |= WM8580_PLLB4_MCLKOUTSRC_PLLB;
break;
case WM8580_CLKSRC_OSC:
reg |= WM8580_PLLB4_MCLKOUTSRC_OSC;
break;
default:
return -EINVAL;
}
wm8580_write(codec, WM8580_PLLB4, reg);
break;
case WM8580_DAC_CLKSEL:
reg = wm8580_read(codec, WM8580_CLKSEL);
reg &= ~WM8580_CLKSEL_DAC_CLKSEL_MASK;
switch (div) {
case WM8580_CLKSRC_MCLK:
break;
case WM8580_CLKSRC_PLLA:
reg |= WM8580_CLKSEL_DAC_CLKSEL_PLLA;
break;
case WM8580_CLKSRC_PLLB:
reg |= WM8580_CLKSEL_DAC_CLKSEL_PLLB;
break;
default:
return -EINVAL;
}
wm8580_write(codec, WM8580_CLKSEL, reg);
break;
case WM8580_CLKOUTSRC:
reg = wm8580_read(codec, WM8580_PLLB4);
reg &= ~WM8580_PLLB4_CLKOUTSRC_MASK;
switch (div) {
case WM8580_CLKSRC_NONE:
break;
case WM8580_CLKSRC_PLLA:
reg |= WM8580_PLLB4_CLKOUTSRC_PLLACLK;
break;
case WM8580_CLKSRC_PLLB:
reg |= WM8580_PLLB4_CLKOUTSRC_PLLBCLK;
break;
case WM8580_CLKSRC_OSC:
reg |= WM8580_PLLB4_CLKOUTSRC_OSCCLK;
break;
default:
return -EINVAL;
}
wm8580_write(codec, WM8580_PLLB4, reg);
break;
default:
return -EINVAL;
}
return 0;
}
static int wm8580_digital_mute(struct snd_soc_dai *codec_dai, int mute)
{
struct snd_soc_codec *codec = codec_dai->codec;
unsigned int reg;
reg = wm8580_read(codec, WM8580_DAC_CONTROL5);
if (mute)
reg |= WM8580_DAC_CONTROL5_MUTEALL;
else
reg &= ~WM8580_DAC_CONTROL5_MUTEALL;
wm8580_write(codec, WM8580_DAC_CONTROL5, reg);
return 0;
}
static int wm8580_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
u16 reg;
switch (level) {
case SND_SOC_BIAS_ON:
case SND_SOC_BIAS_PREPARE:
case SND_SOC_BIAS_STANDBY:
break;
case SND_SOC_BIAS_OFF:
reg = wm8580_read(codec, WM8580_PWRDN1);
wm8580_write(codec, WM8580_PWRDN1, reg | WM8580_PWRDN1_PWDN);
break;
}
codec->bias_level = level;
return 0;
}
#define WM8580_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
struct snd_soc_dai wm8580_dai[] = {
{
.name = "WM8580 PAIFRX",
.id = 0,
.playback = {
.stream_name = "Playback",
.channels_min = 1,
.channels_max = 6,
.rates = SNDRV_PCM_RATE_8000_192000,
.formats = WM8580_FORMATS,
},
.ops = {
.hw_params = wm8580_paif_hw_params,
},
.dai_ops = {
.set_fmt = wm8580_set_paif_dai_fmt,
.set_clkdiv = wm8580_set_dai_clkdiv,
.set_pll = wm8580_set_dai_pll,
.digital_mute = wm8580_digital_mute,
},
},
{
.name = "WM8580 PAIFTX",
.id = 1,
.capture = {
.stream_name = "Capture",
.channels_min = 2,
.channels_max = 2,
.rates = SNDRV_PCM_RATE_8000_192000,
.formats = WM8580_FORMATS,
},
.ops = {
.hw_params = wm8580_paif_hw_params,
},
.dai_ops = {
.set_fmt = wm8580_set_paif_dai_fmt,
.set_clkdiv = wm8580_set_dai_clkdiv,
.set_pll = wm8580_set_dai_pll,
},
},
};
EXPORT_SYMBOL_GPL(wm8580_dai);
/*
* initialise the WM8580 driver
* register the mixer and dsp interfaces with the kernel
*/
static int wm8580_init(struct snd_soc_device *socdev)
{
struct snd_soc_codec *codec = socdev->codec;
int ret = 0;
codec->name = "WM8580";
codec->owner = THIS_MODULE;
codec->read = wm8580_read_reg_cache;
codec->write = wm8580_write;
codec->set_bias_level = wm8580_set_bias_level;
codec->dai = wm8580_dai;
codec->num_dai = ARRAY_SIZE(wm8580_dai);
codec->reg_cache_size = ARRAY_SIZE(wm8580_reg);
codec->reg_cache = kmemdup(wm8580_reg, sizeof(wm8580_reg),
GFP_KERNEL);
if (codec->reg_cache == NULL)
return -ENOMEM;
/* Get the codec into a known state */
wm8580_write(codec, WM8580_RESET, 0);
/* Power up and get individual control of the DACs */
wm8580_write(codec, WM8580_PWRDN1, wm8580_read(codec, WM8580_PWRDN1) &
~(WM8580_PWRDN1_PWDN | WM8580_PWRDN1_ALLDACPD));
/* Make VMID high impedence */
wm8580_write(codec, WM8580_ADC_CONTROL1,
wm8580_read(codec, WM8580_ADC_CONTROL1) & ~0x100);
/* register pcms */
ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1,
SNDRV_DEFAULT_STR1);
if (ret < 0) {
printk(KERN_ERR "wm8580: failed to create pcms\n");
goto pcm_err;
}
wm8580_add_controls(codec);
wm8580_add_widgets(codec);
ret = snd_soc_register_card(socdev);
if (ret < 0) {
printk(KERN_ERR "wm8580: failed to register card\n");
goto card_err;
}
return ret;
card_err:
snd_soc_free_pcms(socdev);
snd_soc_dapm_free(socdev);
pcm_err:
kfree(codec->reg_cache);
return ret;
}
/* If the i2c layer weren't so broken, we could pass this kind of data
around */
static struct snd_soc_device *wm8580_socdev;
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
/*
* WM8580 2 wire address is determined by GPIO5
* state during powerup.
* low = 0x1a
* high = 0x1b
*/
static int wm8580_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct snd_soc_device *socdev = wm8580_socdev;
struct snd_soc_codec *codec = socdev->codec;
int ret;
i2c_set_clientdata(i2c, codec);
codec->control_data = i2c;
ret = wm8580_init(socdev);
if (ret < 0)
dev_err(&i2c->dev, "failed to initialise WM8580\n");
return ret;
}
static int wm8580_i2c_remove(struct i2c_client *client)
{
struct snd_soc_codec *codec = i2c_get_clientdata(client);
kfree(codec->reg_cache);
return 0;
}
static const struct i2c_device_id wm8580_i2c_id[] = {
{ "wm8580", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, wm8580_i2c_id);
static struct i2c_driver wm8580_i2c_driver = {
.driver = {
.name = "WM8580 I2C Codec",
.owner = THIS_MODULE,
},
.probe = wm8580_i2c_probe,
.remove = wm8580_i2c_remove,
.id_table = wm8580_i2c_id,
};
static int wm8580_add_i2c_device(struct platform_device *pdev,
const struct wm8580_setup_data *setup)
{
struct i2c_board_info info;
struct i2c_adapter *adapter;
struct i2c_client *client;
int ret;
ret = i2c_add_driver(&wm8580_i2c_driver);
if (ret != 0) {
dev_err(&pdev->dev, "can't add i2c driver\n");
return ret;
}
memset(&info, 0, sizeof(struct i2c_board_info));
info.addr = setup->i2c_address;
strlcpy(info.type, "wm8580", I2C_NAME_SIZE);
adapter = i2c_get_adapter(setup->i2c_bus);
if (!adapter) {
dev_err(&pdev->dev, "can't get i2c adapter %d\n",
setup->i2c_bus);
goto err_driver;
}
client = i2c_new_device(adapter, &info);
i2c_put_adapter(adapter);
if (!client) {
dev_err(&pdev->dev, "can't add i2c device at 0x%x\n",
(unsigned int)info.addr);
goto err_driver;
}
return 0;
err_driver:
i2c_del_driver(&wm8580_i2c_driver);
return -ENODEV;
}
#endif
static int wm8580_probe(struct platform_device *pdev)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct wm8580_setup_data *setup;
struct snd_soc_codec *codec;
struct wm8580_priv *wm8580;
int ret = 0;
pr_info("WM8580 Audio Codec %s\n", WM8580_VERSION);
setup = socdev->codec_data;
codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
if (codec == NULL)
return -ENOMEM;
wm8580 = kzalloc(sizeof(struct wm8580_priv), GFP_KERNEL);
if (wm8580 == NULL) {
kfree(codec);
return -ENOMEM;
}
codec->private_data = wm8580;
socdev->codec = codec;
mutex_init(&codec->mutex);
INIT_LIST_HEAD(&codec->dapm_widgets);
INIT_LIST_HEAD(&codec->dapm_paths);
wm8580_socdev = socdev;
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
if (setup->i2c_address) {
codec->hw_write = (hw_write_t)i2c_master_send;
ret = wm8580_add_i2c_device(pdev, setup);
}
#else
/* Add other interfaces here */
#endif
return ret;
}
/* power down chip */
static int wm8580_remove(struct platform_device *pdev)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_codec *codec = socdev->codec;
if (codec->control_data)
wm8580_set_bias_level(codec, SND_SOC_BIAS_OFF);
snd_soc_free_pcms(socdev);
snd_soc_dapm_free(socdev);
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
i2c_unregister_device(codec->control_data);
i2c_del_driver(&wm8580_i2c_driver);
#endif
kfree(codec->private_data);
kfree(codec);
return 0;
}
struct snd_soc_codec_device soc_codec_dev_wm8580 = {
.probe = wm8580_probe,
.remove = wm8580_remove,
};
EXPORT_SYMBOL_GPL(soc_codec_dev_wm8580);
MODULE_DESCRIPTION("ASoC WM8580 driver");
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
MODULE_LICENSE("GPL");