| /* |
| * Device Tree Include file for Marvell Armada 37xx family of SoCs. |
| * |
| * Copyright (C) 2016 Marvell |
| * |
| * Gregory CLEMENT <gregory.clement@free-electrons.com> |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This file is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This file is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| / { |
| model = "Marvell Armada 37xx SoC"; |
| compatible = "marvell,armada3700"; |
| interrupt-parent = <&gic>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| aliases { |
| serial0 = &uart0; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53", "arm,armv8"; |
| reg = <0>; |
| enable-method = "psci"; |
| }; |
| }; |
| |
| psci { |
| compatible = "arm,psci-0.2"; |
| method = "smc"; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 13 |
| (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>, |
| <GIC_PPI 14 |
| (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>, |
| <GIC_PPI 11 |
| (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>, |
| <GIC_PPI 10 |
| (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; |
| }; |
| |
| soc { |
| compatible = "simple-bus"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| internal-regs@d0000000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| /* 32M internal register @ 0xd000_0000 */ |
| ranges = <0x0 0x0 0xd0000000 0x2000000>; |
| |
| spi0: spi@10600 { |
| compatible = "marvell,armada-3700-spi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x10600 0xA00>; |
| clocks = <&nb_periph_clk 7>; |
| interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; |
| num-cs = <4>; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c@11000 { |
| compatible = "marvell,armada-3700-i2c"; |
| reg = <0x11000 0x24>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&nb_periph_clk 10>; |
| interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; |
| mrvl,i2c-fast-mode; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@11080 { |
| compatible = "marvell,armada-3700-i2c"; |
| reg = <0x11080 0x24>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&nb_periph_clk 9>; |
| interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; |
| mrvl,i2c-fast-mode; |
| status = "disabled"; |
| }; |
| |
| uart0: serial@12000 { |
| compatible = "marvell,armada-3700-uart"; |
| reg = <0x12000 0x400>; |
| interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| nb_periph_clk: nb-periph-clk@13000 { |
| compatible = "marvell,armada-3700-periph-clock-nb"; |
| reg = <0x13000 0x100>; |
| clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, |
| <&tbg 3>, <&xtalclk>; |
| #clock-cells = <1>; |
| }; |
| |
| sb_periph_clk: sb-periph-clk@18000 { |
| compatible = "marvell,armada-3700-periph-clock-sb"; |
| reg = <0x18000 0x100>; |
| clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, |
| <&tbg 3>, <&xtalclk>; |
| #clock-cells = <1>; |
| }; |
| |
| tbg: tbg@13200 { |
| compatible = "marvell,armada-3700-tbg-clock"; |
| reg = <0x13200 0x100>; |
| clocks = <&xtalclk>; |
| #clock-cells = <1>; |
| }; |
| |
| gpio1: gpio@13800 { |
| compatible = "marvell,mvebu-gpio-3700", |
| "syscon", "simple-mfd"; |
| reg = <0x13800 0x500>; |
| |
| xtalclk: xtal-clk { |
| compatible = "marvell,armada-3700-xtal-clock"; |
| clock-output-names = "xtal"; |
| #clock-cells = <0>; |
| }; |
| }; |
| |
| eth0: ethernet@30000 { |
| compatible = "marvell,armada-3700-neta"; |
| reg = <0x30000 0x4000>; |
| interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&sb_periph_clk 8>; |
| status = "disabled"; |
| }; |
| |
| mdio: mdio@32004 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "marvell,orion-mdio"; |
| reg = <0x32004 0x4>; |
| }; |
| |
| eth1: ethernet@40000 { |
| compatible = "marvell,armada-3700-neta"; |
| reg = <0x40000 0x4000>; |
| interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&sb_periph_clk 7>; |
| status = "disabled"; |
| }; |
| |
| usb3: usb@58000 { |
| compatible = "marvell,armada3700-xhci", |
| "generic-xhci"; |
| reg = <0x58000 0x4000>; |
| interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&sb_periph_clk 12>; |
| status = "disabled"; |
| }; |
| |
| usb2: usb@5e000 { |
| compatible = "marvell,armada-3700-ehci"; |
| reg = <0x5e000 0x2000>; |
| interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| xor@60900 { |
| compatible = "marvell,armada-3700-xor"; |
| reg = <0x60900 0x100 |
| 0x60b00 0x100>; |
| |
| xor10 { |
| interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| xor11 { |
| interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| sdhci0: sdhci@d8000 { |
| compatible = "marvell,armada-3700-sdhci", |
| "marvell,sdhci-xenon"; |
| reg = <0xd8000 0x300 |
| 0x17808 0x4>; |
| interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&nb_periph_clk 0>; |
| clock-names = "core"; |
| status = "disabled"; |
| }; |
| |
| sata: sata@e0000 { |
| compatible = "marvell,armada-3700-ahci"; |
| reg = <0xe0000 0x2000>; |
| interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| gic: interrupt-controller@1d00000 { |
| compatible = "arm,gic-v3"; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| reg = <0x1d00000 0x10000>, /* GICD */ |
| <0x1d40000 0x40000>; /* GICR */ |
| }; |
| }; |
| |
| pcie0: pcie@d0070000 { |
| compatible = "marvell,armada-3700-pcie"; |
| device_type = "pci"; |
| status = "disabled"; |
| reg = <0 0xd0070000 0 0x20000>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| bus-range = <0x00 0xff>; |
| interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| #interrupt-cells = <1>; |
| msi-parent = <&pcie0>; |
| msi-controller; |
| ranges = <0x82000000 0 0xe8000000 0 0xe8000000 0 0x1000000 /* Port 0 MEM */ |
| 0x81000000 0 0xe9000000 0 0xe9000000 0 0x10000>; /* Port 0 IO*/ |
| interrupt-map-mask = <0 0 0 7>; |
| interrupt-map = <0 0 0 1 &pcie_intc 0>, |
| <0 0 0 2 &pcie_intc 1>, |
| <0 0 0 3 &pcie_intc 2>, |
| <0 0 0 4 &pcie_intc 3>; |
| pcie_intc: interrupt-controller { |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| }; |
| }; |
| }; |
| }; |