[media] rename drivers/media/video as .../platform
The remaining drivers are mostly platform drivers. Name the
dir to reflect it.
It makes sense to latter break it into a few other dirs.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
new file mode 100644
index 0000000..e1959a8
--- /dev/null
+++ b/drivers/media/platform/Kconfig
@@ -0,0 +1,297 @@
+if MEDIA_CAMERA_SUPPORT
+
+config VIDEO_VIVI
+ tristate "Virtual Video Driver"
+ depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
+ depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
+ select FONT_8x16
+ select VIDEOBUF2_VMALLOC
+ default n
+ ---help---
+ Enables a virtual video driver. This device shows a color bar
+ and a timestamp, as a real device would generate by using V4L2
+ api.
+ Say Y here if you want to test video apps or debug V4L devices.
+ In doubt, say N.
+
+#
+# Platform drivers
+# All drivers here are currently for webcam support
+
+menuconfig V4L_PLATFORM_DRIVERS
+ bool "V4L platform devices"
+ depends on MEDIA_CAMERA_SUPPORT
+ default n
+ ---help---
+ Say Y here to enable support for platform-specific V4L drivers.
+
+if V4L_PLATFORM_DRIVERS
+
+source "drivers/media/platform/marvell-ccic/Kconfig"
+
+config VIDEO_VIA_CAMERA
+ tristate "VIAFB camera controller support"
+ depends on FB_VIA
+ select VIDEOBUF_DMA_SG
+ select VIDEO_OV7670
+ help
+ Driver support for the integrated camera controller in VIA
+ Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems
+ with ov7670 sensors.
+
+#
+# Platform multimedia device configuration
+#
+
+source "drivers/media/platform/davinci/Kconfig"
+
+source "drivers/media/platform/omap/Kconfig"
+
+source "drivers/media/platform/blackfin/Kconfig"
+
+config VIDEO_SH_VOU
+ tristate "SuperH VOU video output driver"
+ depends on VIDEO_DEV && ARCH_SHMOBILE
+ select VIDEOBUF_DMA_CONTIG
+ help
+ Support for the Video Output Unit (VOU) on SuperH SoCs.
+
+config VIDEO_VIU
+ tristate "Freescale VIU Video Driver"
+ depends on VIDEO_V4L2 && PPC_MPC512x
+ select VIDEOBUF_DMA_CONTIG
+ default y
+ ---help---
+ Support for Freescale VIU video driver. This device captures
+ video data, or overlays video on DIU frame buffer.
+
+ Say Y here if you want to enable VIU device on MPC5121e Rev2+.
+ In doubt, say N.
+
+config VIDEO_TIMBERDALE
+ tristate "Support for timberdale Video In/LogiWIN"
+ depends on VIDEO_V4L2 && I2C && DMADEVICES
+ select DMA_ENGINE
+ select TIMB_DMA
+ select VIDEO_ADV7180
+ select VIDEOBUF_DMA_CONTIG
+ ---help---
+ Add support for the Video In peripherial of the timberdale FPGA.
+
+config VIDEO_VINO
+ tristate "SGI Vino Video For Linux"
+ depends on I2C && SGI_IP22 && VIDEO_V4L2
+ select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO
+ help
+ Say Y here to build in support for the Vino video input system found
+ on SGI Indy machines.
+
+config VIDEO_M32R_AR
+ tristate "AR devices"
+ depends on M32R && VIDEO_V4L2
+ ---help---
+ This is a video4linux driver for the Renesas AR (Artificial Retina)
+ camera module.
+
+config VIDEO_M32R_AR_M64278
+ tristate "AR device with color module M64278(VGA)"
+ depends on PLAT_M32700UT
+ select VIDEO_M32R_AR
+ ---help---
+ This is a video4linux driver for the Renesas AR (Artificial
+ Retina) with M64278E-800 camera module.
+ This module supports VGA(640x480 pixels) resolutions.
+
+ To compile this driver as a module, choose M here: the
+ module will be called arv.
+
+config VIDEO_OMAP3
+ tristate "OMAP 3 Camera support (EXPERIMENTAL)"
+ depends on OMAP_IOVMM && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && ARCH_OMAP3 && EXPERIMENTAL
+ ---help---
+ Driver for an OMAP 3 camera controller.
+
+config VIDEO_OMAP3_DEBUG
+ bool "OMAP 3 Camera debug messages"
+ depends on VIDEO_OMAP3
+ ---help---
+ Enable debug messages on OMAP 3 camera controller driver.
+
+config SOC_CAMERA
+ tristate "SoC camera support"
+ depends on VIDEO_V4L2 && HAS_DMA && I2C
+ select VIDEOBUF_GEN
+ select VIDEOBUF2_CORE
+ help
+ SoC Camera is a common API to several cameras, not connecting
+ over a bus like PCI or USB. For example some i2c camera connected
+ directly to the data bus of an SoC.
+
+
+config SOC_CAMERA_PLATFORM
+ tristate "platform camera support"
+ depends on SOC_CAMERA
+ help
+ This is a generic SoC camera platform driver, useful for testing
+
+config MX1_VIDEO
+ bool
+
+config VIDEO_MX1
+ tristate "i.MX1/i.MXL CMOS Sensor Interface driver"
+ depends on VIDEO_DEV && ARCH_MX1 && SOC_CAMERA
+ select FIQ
+ select VIDEOBUF_DMA_CONTIG
+ select MX1_VIDEO
+ ---help---
+ This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface
+
+config MX3_VIDEO
+ bool
+
+config VIDEO_MX3
+ tristate "i.MX3x Camera Sensor Interface driver"
+ depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA
+ select VIDEOBUF2_DMA_CONTIG
+ select MX3_VIDEO
+ ---help---
+ This is a v4l2 driver for the i.MX3x Camera Sensor Interface
+
+config VIDEO_PXA27x
+ tristate "PXA27x Quick Capture Interface driver"
+ depends on VIDEO_DEV && PXA27x && SOC_CAMERA
+ select VIDEOBUF_DMA_SG
+ ---help---
+ This is a v4l2 driver for the PXA27x Quick Capture Interface
+
+config VIDEO_SH_MOBILE_CSI2
+ tristate "SuperH Mobile MIPI CSI-2 Interface driver"
+ depends on VIDEO_DEV && SOC_CAMERA && HAVE_CLK
+ ---help---
+ This is a v4l2 driver for the SuperH MIPI CSI-2 Interface
+
+config VIDEO_SH_MOBILE_CEU
+ tristate "SuperH Mobile CEU Interface driver"
+ depends on VIDEO_DEV && SOC_CAMERA && HAS_DMA && HAVE_CLK
+ select VIDEOBUF2_DMA_CONTIG
+ ---help---
+ This is a v4l2 driver for the SuperH Mobile CEU Interface
+
+config VIDEO_OMAP1
+ tristate "OMAP1 Camera Interface driver"
+ depends on VIDEO_DEV && ARCH_OMAP1 && SOC_CAMERA
+ select VIDEOBUF_DMA_CONTIG
+ select VIDEOBUF_DMA_SG
+ ---help---
+ This is a v4l2 driver for the TI OMAP1 camera interface
+
+config VIDEO_OMAP2
+ tristate "OMAP2 Camera Capture Interface driver"
+ depends on VIDEO_DEV && ARCH_OMAP2
+ select VIDEOBUF_DMA_SG
+ ---help---
+ This is a v4l2 driver for the TI OMAP2 camera capture interface
+
+config VIDEO_MX2_HOSTSUPPORT
+ bool
+
+config VIDEO_MX2
+ tristate "i.MX27/i.MX25 Camera Sensor Interface driver"
+ depends on VIDEO_DEV && SOC_CAMERA && (MACH_MX27 || (ARCH_MX25 && BROKEN))
+ select VIDEOBUF2_DMA_CONTIG
+ select VIDEO_MX2_HOSTSUPPORT
+ ---help---
+ This is a v4l2 driver for the i.MX27 and the i.MX25 Camera Sensor
+ Interface
+
+config VIDEO_ATMEL_ISI
+ tristate "ATMEL Image Sensor Interface (ISI) support"
+ depends on VIDEO_DEV && SOC_CAMERA && ARCH_AT91
+ select VIDEOBUF2_DMA_CONTIG
+ ---help---
+ This module makes the ATMEL Image Sensor Interface available
+ as a v4l2 device.
+
+source "drivers/media/platform/s5p-fimc/Kconfig"
+source "drivers/media/platform/s5p-tv/Kconfig"
+
+endif # V4L_PLATFORM_DRIVERS
+
+menuconfig V4L_MEM2MEM_DRIVERS
+ bool "Memory-to-memory multimedia devices"
+ depends on VIDEO_V4L2
+ default n
+ ---help---
+ Say Y here to enable selecting drivers for V4L devices that
+ use system memory for both source and destination buffers, as opposed
+ to capture and output drivers, which use memory buffers for just
+ one of those.
+
+if V4L_MEM2MEM_DRIVERS
+
+config VIDEO_MEM2MEM_TESTDEV
+ tristate "Virtual test device for mem2mem framework"
+ depends on VIDEO_DEV && VIDEO_V4L2
+ select VIDEOBUF2_VMALLOC
+ select V4L2_MEM2MEM_DEV
+ default n
+ ---help---
+ This is a virtual test device for the memory-to-memory driver
+ framework.
+
+config VIDEO_CODA
+ tristate "Chips&Media Coda multi-standard codec IP"
+ depends on VIDEO_DEV && VIDEO_V4L2
+ select VIDEOBUF2_DMA_CONTIG
+ select V4L2_MEM2MEM_DEV
+ ---help---
+ Coda is a range of video codec IPs that supports
+ H.264, MPEG-4, and other video formats.
+
+config VIDEO_MEM2MEM_DEINTERLACE
+ tristate "Deinterlace support"
+ depends on VIDEO_DEV && VIDEO_V4L2 && DMA_ENGINE
+ select VIDEOBUF2_DMA_CONTIG
+ select V4L2_MEM2MEM_DEV
+ help
+ Generic deinterlacing V4L2 driver.
+
+config VIDEO_SAMSUNG_S5P_G2D
+ tristate "Samsung S5P and EXYNOS4 G2D 2d graphics accelerator driver"
+ depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P
+ select VIDEOBUF2_DMA_CONTIG
+ select V4L2_MEM2MEM_DEV
+ default n
+ ---help---
+ This is a v4l2 driver for Samsung S5P and EXYNOS4 G2D
+ 2d graphics accelerator.
+
+config VIDEO_SAMSUNG_S5P_JPEG
+ tristate "Samsung S5P/Exynos4 JPEG codec driver (EXPERIMENTAL)"
+ depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P && EXPERIMENTAL
+ select VIDEOBUF2_DMA_CONTIG
+ select V4L2_MEM2MEM_DEV
+ ---help---
+ This is a v4l2 driver for Samsung S5P and EXYNOS4 JPEG codec
+
+config VIDEO_SAMSUNG_S5P_MFC
+ tristate "Samsung S5P MFC 5.1 Video Codec"
+ depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P
+ select VIDEOBUF2_DMA_CONTIG
+ default n
+ help
+ MFC 5.1 driver for V4L2.
+
+config VIDEO_MX2_EMMAPRP
+ tristate "MX2 eMMa-PrP support"
+ depends on VIDEO_DEV && VIDEO_V4L2 && SOC_IMX27
+ select VIDEOBUF2_DMA_CONTIG
+ select V4L2_MEM2MEM_DEV
+ help
+ MX2X chips have a PrP that can be used to process buffers from
+ memory to memory. Operations include resizing and format
+ conversion.
+
+endif # V4L_MEM2MEM_DRIVERS
+
+endif # MEDIA_CAMERA_SUPPORT